WorldWideScience

Sample records for environmentally acceptable method

  1. Discussion on the environmental protection acceptance method and the critical issues of the completion of projects about radiation usage in the hospitals

    International Nuclear Information System (INIS)

    Wang Wei

    2014-01-01

    It is widely used in the world that the hospitals take advantages of radiation technology. Practically it is involved radioactive isotope, sealed source and the usage of ray device. Based on the environmental protection acceptance of the finished projects, this article is aimed at the actual characteristics of the medical practice and differentiating the major factors of environmental effects, choosing the monitoring criteria and method of environmental protection acceptance and exploring the critical issues in the course of acceptance. Finally this essay is intended to provide theory evidence and technical support in the acceptance of the above projects. (author)

  2. Environmental Restoration Disposal Facility Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    Dronen, V.R.

    1998-06-01

    The Hanford Site is operated by the U. S. Department of Energy (DOE) with a primary mission of environmental cleanup and restoration. The Environmental Restoration Disposal Facility (ERDF) is an integral part of the DOE environmental restoration effort at the Hanford Site. The purpose of this document is to establish the ERDF waste acceptance criteria for disposal of materials resulting from Hanford Site cleanup activities. Definition of and compliance with the requirements of this document will enable implementation of appropriate measures to protect human health and the environment, ensure the integrity of the ERDF liner system, facilitate efficient use of the available space in the ERDF, and comply with applicable environmental regulations and DOE orders. To serve this purpose, the document defines responsibilities, identifies the waste acceptance process, and provides the primary acceptance criteria and regulatory citations to guide ERDF users. The information contained in this document is not intended to repeat or summarize the contents of all applicable regulations

  3. THE ENVIRONMENTAL TECHNOLOGIES ACCEPTANCE (ETA) PROGRAM

    International Nuclear Information System (INIS)

    Behr-Andres, Christina B.

    2001-01-01

    The Environmental Technologies Acceptance (ETA) Program at the Energy and Environmental Research Center (EERC) is intended to advance the development, commercial acceptance, and timely deployment of selected private sector technologies for the cleanup of sites in the nuclear defense complex as well as the greater market. As shown in Table 1, this cooperative agreement funded by the National Energy Technology Laboratory (NETL) consists of three tasks: Technology Selection, Technology Development, and Technology Verification. As currently conceived, the ETA will address the needs of as many technologies as appropriate under its current 3-year term. This report covers activities during the first 6 months of the 3-year ETA program

  4. Acceptability of health information technology aimed at environmental health education in a prenatal clinic.

    Science.gov (United States)

    Rosas, Lisa G; Trujillo, Celina; Camacho, Jose; Madrigal, Daniel; Bradman, Asa; Eskenazi, Brenda

    2014-11-01

    To describe the acceptability of an interactive computer kiosk that provides environmental health education to low-income Latina prenatal patients. A mixed-methods approach was used to assess the acceptability of the Prenatal Environmental Health Kiosk pregnant Latina women in Salinas, CA (n=152). The kiosk is a low literacy, interactive touch-screen computer program with an audio component and includes graphics and an interactive game. The majority had never used a kiosk before. Over 90% of women reported that they learned something new while using the kiosk. Prior to using the kiosk, 22% of women reported their preference of receiving health education from a kiosk over a pamphlet or video compared with 57% after using the kiosk (peducation; and (3) popularity of the interactive game. The Prenatal Environmental Health Kiosk is an innovative patient health education modality that was shown to be acceptable among a population of low-income Latino pregnant women in a prenatal care clinic. This pilot study demonstrated that a health education kiosk was an acceptable strategy for providing Latina prenatal patients with information on pertinent environmental exposures. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  5. Acceptable Risk Analysis for Abrupt Environmental Pollution Accidents in Zhangjiakou City, China.

    Science.gov (United States)

    Du, Xi; Zhang, Zhijiao; Dong, Lei; Liu, Jing; Borthwick, Alistair G L; Liu, Renzhi

    2017-04-20

    Abrupt environmental pollution accidents cause considerable damage worldwide to the ecological environment, human health, and property. The concept of acceptable risk aims to answer whether or not a given environmental pollution risk exceeds a societally determined criterion. This paper presents a case study on acceptable environmental pollution risk conducted through a questionnaire survey carried out between August and October 2014 in five representative districts and two counties of Zhangjiakou City, Hebei Province, China. Here, environmental risk primarily arises from accidental water pollution, accidental air pollution, and tailings dam failure. Based on 870 valid questionnaires, demographic and regional differences in public attitudes towards abrupt environmental pollution risks were analyzed, and risk acceptance impact factors determined. The results showed females, people between 21-40 years of age, people with higher levels of education, public servants, and people with higher income had lower risk tolerance. People with lower perceived risk, low-level risk knowledge, high-level familiarity and satisfaction with environmental management, and without experience of environmental accidents had higher risk tolerance. Multiple logistic regression analysis indicated that public satisfaction with environmental management was the most significant factor in risk acceptance, followed by perceived risk of abrupt air pollution, occupation, perceived risk of tailings dam failure, and sex. These findings should be helpful to local decision-makers concerned with environmental risk management (e.g., selecting target groups for effective risk communication) in the context of abrupt environmental accidents.

  6. Monetary or environmental appeals for saving electricity? –Potentials for spillover on low carbon policy acceptability

    International Nuclear Information System (INIS)

    Steinhorst, Julia; Matthies, Ellen

    2016-01-01

    The acceptability of low carbon policies is an important precondition for energy system transitions, such as the German Energiewende. This long-term experimental study examines the potential for behavioural spillover on the acceptability of low carbon policies, caused by a framed intervention to promote electricity saving behaviour. Clients of a German energy provider were randomly assigned to continuously receive electricity saving tips with either monetary framing (saving potential in €) or environmental framing (saving potential in CO_2). The control group did not receive any information. In two follow-up surveys, four (N=333) and nine months (N=258) later, participants rated the acceptability of several low carbon policies. A pre-survey assessed the personal ecological norm for saving electricity. Participants with strong personal ecological norms reported generally higher policy acceptability. After environmental framing they also indicated higher acceptability compared to the monetary framing or control group. These results indicate that information campaigns should be designed carefully in order to promote positive spillover effects. Environmental framing of private-sphere behaviour can increase the disposition for further pro-environmental behaviour in the public sphere, e.g. policy acceptability. When appealing to monetary benefits in pro-environmental behaviour, there is a risk of inhibiting positive spillover effects. - Highlights: •Policy acceptability may be influenced by type of framing and individual factors. •We examined long-term spillover effects in association with type of framing. •Framing (environmental vs. monetary) interacts with personal ecological norms. •For strong personal ecological norms, environmental framing increases acceptability. •Also, strong personal ecological norms increase low carbon policy acceptability.

  7. How much do we value the environment? The acceptation of environmental policy and environmental measures

    International Nuclear Information System (INIS)

    Mulder, S.; Verhue, D.; Adriaansen, M.

    2005-01-01

    Several surveys were conducted to investigate the public opinion in the Netherlands on the environment. The subjects investigated were: climatic change, air pollution, biodiversity, noise and soil pollution, and nature in the Netherlands. Special attention was paid to the willingness of the Dutch to accept specific environmental measures and a marketing strategy for new environmental policy. The purpose of the surveys is to broaden the support of the Dutch people for the environmental policy [nl

  8. Factors Influencing Acceptance Of Contraceptive Methods

    Directory of Open Access Journals (Sweden)

    Anita Gupta

    1997-04-01

    Full Text Available Research Problem: What are the factors influencing acceptance of contraceptive methods. Objective: To study the determinants influencing contra­ceptive acceptance. Study design: Population based cross - sectional study. Setting: Rural area of East Delhi. Participants: Married women in the reproductive age group. Sample:Stratified sampling technique was used to draw the sample. Sample Size: 328 married women of reproductive age group. Study Variables: Socio-economic status, Type of contraceptive, Family size, Male child. Outcome Variables: Acceptance of contraceptives Statistical Analysis: By proportions. Result: Prevalence of use of contraception at the time of data collection was 40.5%. Tubectomy and vasectomy were most commonly used methods. (59.4%, n - 133. Educational status of the women positively influenced the contraceptive acceptance but income did not. Desire for more children was single most important deterrent for accepting contraception. Recommendations: (i             Traditional method of contraception should be given more attention. (ii            Couplesshould be brought in the contraceptive use net at the early stage of marriage.

  9. Understanding, Classifying, and Selecting Environmentally Acceptable Hydraulic Fluids

    Science.gov (United States)

    2016-08-01

    traditional mineral oil; therefore, the life cycle costs over time may be reduced . REPLACEMENT OF EXISTING HYDRAULIC FLUIDS: Hydraulic fluids in existing...properly maintaining the fluid can extend the time interval between fluid changes, thus reducing the overall operating cost of the EA hydraulic fluid. It...Environmentally Acceptable Hydraulic Fluids by Timothy J. Keyser, Robert N. Samuel, and Timothy L. Welp INTRODUCTION: On a daily basis, the United States Army

  10. An efficient, environmentally acceptable, clean up system for well completions

    International Nuclear Information System (INIS)

    Berg, Oe.; Saasen, A.

    1996-01-01

    Evaluation of different casing cleaning fluid systems has been a difficult task due to the lack of a standardised laboratory measurement technique for technical performance. In order to meet the need for a reliable evaluation of different chemicals and fluid systems used in casing cleaning, a laboratory procedure for the evaluation of casing cleaning chemicals has been developed. This procedure has been successfully applied in the development of a new environmentally acceptable casing cleaning fluid system. Two different procedures are presented. An old method where the drilling fluid was displaced down the annulus and up the drill string was found to be ineffective compared to a method where the drilling fluid was displaced up in the annulus. The application of this procedure together with the use of the new chemical additive has reduced the cost of casing cleanup operations in the range of 30-40%. 10 refs., 1 fig., 4 tabs

  11. An evaluation model for indoor environmental quality (IEQ) acceptance in residential buildings

    International Nuclear Information System (INIS)

    Lai, A.C.K.; Mui, K.W.; Wong, L.T.; Law, L.Y.

    2009-01-01

    The indoor environmental quality (IEQ) in residential buildings is examined from the prospect of an occupant's acceptance in four aspects: thermal comfort, indoor air quality, noise level and illumination level. Based on the evaluations by 125 occupants living in 32 typical residential apartments in Hong Kong, this study proposes empirical expressions to approximate the overall IEQ acceptance with respect to four contributors, namely operative temperature, carbon dioxide concentration, equivalent noise level and illumination level, via a multivariate logistic regression model. A range of IEQ acceptances for regular residential conditions is determined and the dependence of the predicted overall IEQ acceptance on the variations of the contributors is discussed. The proposed overall IEQ acceptance can be used as a quantitative assessment criterion for similar residential environments where an occupant's evaluation is expected. (author)

  12. Biomass. A modern and environmentally acceptable fuel

    International Nuclear Information System (INIS)

    Hall, D.O.; House, J.I.

    1995-01-01

    The energy of the sun and carbon dioxide from the atmosphere are captured by plants during photosynthesis. Plant biomass can be used to absorb carbon dioxide emissions from fossil fuels, or it can be converted into modern energy carriers such as electricity, and liquid and gaseous fuels. Biomass supplies 13% of the world's energy consumption (55 EJ, 1990), and in some developing countries it accounts for over 90% of energy use. There is considerable potential for the modernisation of biomass fuels through improved utilisation of existing resources, higher plant productivities and efficient conversion processes using advanced technologies. The interest in bioenergy is increasing rapidly, and it is widely considered as one of the main renewable energy resources of the future due to its large potential, economic viability, and various social and environmental benefits. In particular, biomass energy is among the most favourable options for reducing carbon dioxide emissions. Most of the perceived problems such as land availability, environmental impact, economic viability, and efficiency can be overcome with good management. The constraints to achieving environmentally-acceptable biomass production are not insurmountable, but should rather be seen as scientific and entrepreneurial opportunities which will yield numerous advantages at local, national and international levels in the long term

  13. Investigating Elementary School Students' Technology Acceptance by Applying Digital Game-Based Learning to Environmental Education

    Science.gov (United States)

    Cheng, Yuh-Ming; Lou, Shi-Jer; Kuo, Sheng-Huang; Shih, Ru-Chu

    2013-01-01

    In order to improve and promote students' environmental knowledge, attitudes, and behaviour, integrating environmental education into the primary education curriculum has become a key issue for environmental education. For this reason, this study aimed to investigate elementary school students' acceptance of technology applying digital game-based…

  14. Contested environmental policy infrastructure: Socio-political acceptance of renewable energy, water, and waste facilities

    International Nuclear Information System (INIS)

    Wolsink, Maarten

    2010-01-01

    The construction of new infrastructure is hotly contested. This paper presents a comparative study on three environmental policy domains in the Netherlands that all deal with legitimising building and locating infrastructure facilities. Such infrastructure is usually declared essential to environmental policy and claimed to serve sustainability goals. They are considered to serve (proclaimed) public interests, while the adverse impact or risk that mainly concerns environmental values as well is concentrated at a smaller scale, for example in local communities. The social acceptance of environmental policy infrastructure is institutionally determined. The institutional capacity for learning in infrastructure decision-making processes in the following three domains is compared: 1.The implementation of wind power as a renewable energy innovation; 2.The policy on space-water adaptation, with its claim to implement a new style of management replacing the current practice of focusing on control and 'hard' infrastructure; 3.Waste policy with a focus on sound waste management and disposal, claiming a preference for waste minimization (the 'waste management hierarchy'). All three cases show a large variety of social acceptance issues, where the appraisal of the impact of siting the facilities is confronted with the desirability of the policies. In dealing with environmental conflict, the environmental capacity of the Netherlands appears to be low. The policies are frequently hotly contested within the process of infrastructure decision-making. Decision-making on infrastructure is often framed as if consensus about the objectives of environmental policies exists. These claims are not justified, and therefore stimulating the emergence of environmental conflicts that discourage social acceptance of the policies. Authorities are frequently involved in planning infrastructure that conflicts with their officially proclaimed policy objectives. In these circumstances, they are

  15. Quantifying the measurement uncertainty of results from environmental analytical methods.

    Science.gov (United States)

    Moser, J; Wegscheider, W; Sperka-Gottlieb, C

    2001-07-01

    The Eurachem-CITAC Guide Quantifying Uncertainty in Analytical Measurement was put into practice in a public laboratory devoted to environmental analytical measurements. In doing so due regard was given to the provisions of ISO 17025 and an attempt was made to base the entire estimation of measurement uncertainty on available data from the literature or from previously performed validation studies. Most environmental analytical procedures laid down in national or international standards are the result of cooperative efforts and put into effect as part of a compromise between all parties involved, public and private, that also encompasses environmental standards and statutory limits. Central to many procedures is the focus on the measurement of environmental effects rather than on individual chemical species. In this situation it is particularly important to understand the measurement process well enough to produce a realistic uncertainty statement. Environmental analytical methods will be examined as far as necessary, but reference will also be made to analytical methods in general and to physical measurement methods where appropriate. This paper describes ways and means of quantifying uncertainty for frequently practised methods of environmental analysis. It will be shown that operationally defined measurands are no obstacle to the estimation process as described in the Eurachem/CITAC Guide if it is accepted that the dominating component of uncertainty comes from the actual practice of the method as a reproducibility standard deviation.

  16. 42 CFR 137.285 - Are Self-Governance Tribes required to accept Federal environmental responsibilities to enter...

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Are Self-Governance Tribes required to accept..., DEPARTMENT OF HEALTH AND HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Nepa Process § 137.285 Are Self-Governance Tribes required to accept Federal environmental responsibilities to enter into a construction...

  17. Standardization of waste acceptance test methods by the Materials Characterization Center

    International Nuclear Information System (INIS)

    Slate, S.C.

    1985-01-01

    This paper describes the role of standardized test methods in demonstrating the acceptability of high-level waste (HLW) forms for disposal. Key waste acceptance tests are standardized by the Materials Characterization Center (MCC), which the US Department of Energy (DOE) has established as the central agency in the United States for the standardization of test methods for nuclear waste materials. This paper describes the basic three-step process that is used to show that waste is acceptable for disposal and discusses how standardized tests are used in this process. Several of the key test methods and their areas of application are described. Finally, future plans are discussed for using standardized tests to show waste acceptance. 9 refs., 1 tab

  18. 18 CFR 5.22 - Notice of acceptance and ready for environmental analysis.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Notice of acceptance and ready for environmental analysis. 5.22 Section 5.22 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT INTEGRATED LICENSE APPLICATION PROCESS § 5.22 Notice o...

  19. Public acceptance of management methods under different human-wildlife conflict scenarios.

    Science.gov (United States)

    Liordos, Vasilios; Kontsiotis, Vasileios J; Georgari, Marina; Baltzi, Kerasia; Baltzi, Ioanna

    2017-02-01

    Wildlife management seeks to minimise public controversy for successful application of wildlife control methods. Human dimensions research in wildlife seeks a better understanding of public preferences for effective human-wildlife conflict resolution. In face to face interviews, 630 adults in Greece were asked to rate on a 5-point Likert-like scale their acceptance of 3 management methods, i.e., do nothing, non-lethal control, and lethal control, in the context of 5 human-wildlife conflict scenarios: 1) corvids damage crops; 2) starlings damage crops; 3) starlings foul urban structures; 4) coypus damage crops; and 5) coypus transfer disease. Univariate GLMs determined occupation, hunting membership and their interaction as the stronger predictors of public acceptance, generating 4 stakeholder groups: the general public, farmers, hunters, and farmers-hunters. Differences in acceptance and consensus among stakeholder groups were assessed using the Potential for Conflict Index 2 (PCI 2 ). All 4 stakeholder groups agreed that doing nothing was unacceptable and non-lethal control acceptable in all 5 scenarios, with generally high consensus within and between groups. The lethal control method was more controversial and became increasingly more acceptable as the severity of scenarios was increased and between non-native and native species. Lethal control was unacceptable for the general public in all scenarios. Farmers accepted lethal methods in the corvids and starlings scenarios, were neutral in the coypus damage crops scenario, whereas they accepted lethal control when coypus transfer disease. Hunters' opinion was neutral in the corvids, starlings and coypus damage crops and starlings foul urban structures scenarios, but they accepted lethal methods in the coypus transfer disease scenario. Farmers-hunters considered lethal control acceptable in all 5 scenarios. Implications from this study could be used for designing a socio-ecological approach which incorporates

  20. On the Acceptance of Gain Sharing Methods in Supply Chain Collaboration

    NARCIS (Netherlands)

    Grigoriev, Alexander; Jung, Verena; Peeters - Rutten, Marianne; Vredeveld, Tjark

    2017-01-01

    Purpose – The purpose of this paper is to investigate the acceptance of different gain sharing methods in practice. In addition, the influence of behavioural aspects on the acceptance of these allocation methods is observed. Design/methodology/approach – In order to investigate the research

  1. Environmental awareness and traffic behaviour. Empirical analyses on the choice of means of transport and the acceptance of environment-policy measures

    International Nuclear Information System (INIS)

    Franzen, A.

    1996-01-01

    In the public and scientific discussion about options concerning solutions to the environmental problem, the role played by environmental awareness is often an area of interest. Two essential questions are posed: - What influence do environment-related attitudes have on the everyday, environmentally relevant actions of individuals? - What influence does environmental awareness have on voting behaviour and on the acceptance of environment policy measures? In this book, both questions are empirically examined in detail using, as examples, the choice of means of transport and the acceptance of measures to control traffic [de

  2. AWARENESS AND ACCEPTANCE OF TEMPORARY METHODS OF CONTRACEPTIVE AMONG PRIMIPAROUS WOMEN

    Directory of Open Access Journals (Sweden)

    Cicija Kalloopparamban

    2017-04-01

    Full Text Available BACKGROUND Contraceptive advice is a component of good preventive healthcare. Socioeconomic factors, education are a few of factors that play vital role in family planning acceptance. To provide this, understanding the attitude and knowledge of patient towards contraception is very much necessary. Objective of this study is to assess the awareness and acceptance of temporary methods of contraception in postpartum primiparas during their first visit to Family Planning OPD, MCH, Kottayam. MATERIALS AND METHODS A hospital-based prospective descriptive study was conducted among the primiparas presented in Family Planning OPD for the first time in postpartum at 6 wks. in MCH during the study period. Informed written consent was obtained from the patients. The study subjects were interviewed with questionnaire to assess the awareness and acceptance of temporary contraceptive methods and the level to which each of them will keep compliance. The questionnaire was to elicit information regarding age, educational status, occupation, knowledge and source of contraceptive methods, attitude of female towards contraception. RESULTS In our study, majority include graduates (37%, but most of study population were unemployed (43.2%. Literate people are more conscious about their own health and that of their families and try to limit their families much more effectively than the illiterates do. The awareness of the group about contraception was 80.5%, mostly through health workers, 39.6%. 53.9% of the study population had accepted any of the temporary contraceptive methods; maximum opted being the barrier contraception, 19%. 60.9% had peer group support. 74.5% had antenatal counselling from a healthcare worker regarding the use of temporary contraceptive methods. Acceptance was maximum among the graduated subjects, 66.9%.The type accepted by graduates include mostly barrier. Contraceptives, 23.2%. 48% of the graduates used for the need of spacing. A maximum peer

  3. Environmental Assessment of Urgent-Relief Acceptance of Foreign Research Reactor Spent Nuclear Fuel

    International Nuclear Information System (INIS)

    1994-04-01

    The Department of Energy has completed the Environmental Assessment (EA) of Urgent-Relief Acceptance of Foreign Research Reactor Spent Nuclear Fuel and issued a Finding of No Significant Impact (FONSI) for the proposed action. The EA and FONSI are enclosed for your information. The Department has decided to accept a limited number of spent nuclear fuel elements (409 elements) containing uranium that was enriched in the United States from eight research reactors in Austria, Denmark, Germany, Greece, the Netherlands, Sweden, and Switzerland. This action is necessary to maintain the viability of a major US nuclear weapons nonproliferation program to limit or eliminate the use of highly enriched uranium in civil programs. The purpose of the EA is to maintain the cooperation of the foreign research reactor operators with the nonproliferation program while a more extensive Environmental Impact Statement (EIS) is prepared on a proposed broader policy involving the acceptance of up to 15,000 foreign research reactor spent fuel elements over a 10 to 15 year period. Based on an evaluation of transport by commercial container liner or chartered vessel, five eastern seaboard ports, and truck and train modes of transporting the spent fuel overland to the Savannah River Sits, the Department has concluded that no significant impact would result from any combination of port and made of transport. In addition, no significant impacts were found from interim storage of spent fuel at the Savannah River Site

  4. Environmental Assessment of Urgent-Relief Acceptance of Foreign Research Reactor Spent Nuclear Fuel

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The Department of Energy has completed the Environmental Assessment (EA) of Urgent-Relief Acceptance of Foreign Research Reactor Spent Nuclear Fuel and issued a Finding of No Significant Impact (FONSI) for the proposed action. The EA and FONSI are enclosed for your information. The Department has decided to accept a limited number of spent nuclear fuel elements (409 elements) containing uranium that was enriched in the United States from eight research reactors in Austria, Denmark, Germany, Greece, the Netherlands, Sweden, and Switzerland. This action is necessary to maintain the viability of a major US nuclear weapons nonproliferation program to limit or eliminate the use of highly enriched uranium in civil programs. The purpose of the EA is to maintain the cooperation of the foreign research reactor operators with the nonproliferation program while a more extensive Environmental Impact Statement (EIS) is prepared on a proposed broader policy involving the acceptance of up to 15,000 foreign research reactor spent fuel elements over a 10 to 15 year period. Based on an evaluation of transport by commercial container liner or chartered vessel, five eastern seaboard ports, and truck and train modes of transporting the spent fuel overland to the Savannah River Sits, the Department has concluded that no significant impact would result from any combination of port and made of transport. In addition, no significant impacts were found from interim storage of spent fuel at the Savannah River Site.

  5. Waste Acceptance Decisions and Uncertainty Analysis at the Oak Ridge Environmental Management Waste Management Facility

    International Nuclear Information System (INIS)

    Redus, K. S.; Patterson, J. E.; Hampshire, G. L.; Perkins, A. B.

    2003-01-01

    The Waste Acceptance Criteria (WAC) Attainment Team (AT) routinely provides the U.S. Department of Energy (DOE) Oak Ridge Operations with Go/No-Go decisions associated with the disposition of over 1.8 million yd3 of low-level radioactive, TSCA, and RCRA hazardous waste. This supply of waste comes from 60+ environmental restoration projects over the next 15 years planned to be dispositioned at the Oak Ridge Environmental Management Waste Management Facility (EMWMF). The EMWMF WAC AT decision making process is accomplished in four ways: (1) ensure a clearly defined mission and timeframe for accomplishment is established, (2) provide an effective organization structure with trained personnel, (3) have in place a set of waste acceptance decisions and Data Quality Objectives (DQO) for which quantitative measures are required, and (4) use validated risk-based forecasting, decision support, and modeling/simulation tools. We provide a summary of WAC AT structure and performance. We offer suggestions based on lessons learned for effective transfer to other DOE

  6. Waste Acceptance Decisions and Uncertainty Analysis at the Oak Ridge Environmental Management Waste Management Facility

    Energy Technology Data Exchange (ETDEWEB)

    Redus, K. S.; Patterson, J. E.; Hampshire, G. L.; Perkins, A. B.

    2003-02-25

    The Waste Acceptance Criteria (WAC) Attainment Team (AT) routinely provides the U.S. Department of Energy (DOE) Oak Ridge Operations with Go/No-Go decisions associated with the disposition of over 1.8 million yd3 of low-level radioactive, TSCA, and RCRA hazardous waste. This supply of waste comes from 60+ environmental restoration projects over the next 15 years planned to be dispositioned at the Oak Ridge Environmental Management Waste Management Facility (EMWMF). The EMWMF WAC AT decision making process is accomplished in four ways: (1) ensure a clearly defined mission and timeframe for accomplishment is established, (2) provide an effective organization structure with trained personnel, (3) have in place a set of waste acceptance decisions and Data Quality Objectives (DQO) for which quantitative measures are required, and (4) use validated risk-based forecasting, decision support, and modeling/simulation tools. We provide a summary of WAC AT structure and performance. We offer suggestions based on lessons learned for effective transfer to other DOE.

  7. Acceptance of Addiction Prevention Exiting Methods and Presentation of Appropriate Model

    Directory of Open Access Journals (Sweden)

    Ali Asghar Savad-Kouhi

    2006-10-01

    Full Text Available Objective: The aim of this study is assessment of acceptance of addiction prevention existing methods and design and present of appropriate model. Materials & Methods: This research has done by survey and desariptive method by using questionnaire we assessed knowledge and belief of people about suggesting and existing methods of addiction prevention and their acceptence and finally design new and appropriate model of addiction prevention. For designing questionnaire, first exports and professors were openly interviewed and according their views final questionnaire was planned. We used questionnaire with 2 open ended and 61 close-ended tests for gathering data. The subjects of research were 2500 persons 13-35 years old that were selected by randomized sampling from 15 provinces. Results: The findings showed that according to people who were studied, they have positive beliefs about prevention methods and their effectiveness. According to findings a good model is inclusive model that able to do in four level: knowledge, change believe and attitude, control and change behavior. Conclusion: The people of study belive that acceptance of suggesting and existing methods of addiction prevention are effective direct and indirect to others, and appropriate model is inclusive model.

  8. Environmentally acceptable endpoints for PAHs at a manufactured gas plant site

    Energy Technology Data Exchange (ETDEWEB)

    Stroo, H.F.; Jensen, R.; Loehr, R.C.; Nakles, D.V.; Fairbrother, A.; Liban, C.B. [ThermoRetec Corp., Carson, CA (USA)

    2000-09-01

    Samples from a former manufactured gas plant (MGP) site in Santa Barbara, CA were tested to evaluate the environmentally acceptable endpoints (EAE) process for setting risk-based cleanup criteria. The research was part of an ongoing effort to develop and demonstrate a protocol for assessing risk-based criteria for MGP sites that incorporates the availability of polycyclic aromatic hydrocarbons (PAHs). Six soil samples were subjected to a battery of physical and biological tests that focused on determining the 'availability' of the soil-bound contaminants to groundwater, ecological receptors, and human receptors. Results demonstrated that sorption to soil, matrix effects, aging, and treatment can significantly reduce chemical availability. Including these reduced availability results in risk assessment calculations yielded environmentally protective cleanup levels almost 3-10 times greater than levels derived using California default risk assessment assumptions. Using an EAE-based approach for MGP soils, especially those containing lampblack, could provide more realistic risk assessment. 23 refs., 6 tabs.

  9. Approaches to acceptable risk

    International Nuclear Information System (INIS)

    Whipple, C.

    1997-01-01

    Several alternative approaches to address the question open-quotes How safe is safe enough?close quotes are reviewed and an attempt is made to apply the reasoning behind these approaches to the issue of acceptability of radiation exposures received in space. The approaches to the issue of the acceptability of technological risk described here are primarily analytical, and are drawn from examples in the management of environmental health risks. These include risk-based approaches, in which specific quantitative risk targets determine the acceptability of an activity, and cost-benefit and decision analysis, which generally focus on the estimation and evaluation of risks, benefits and costs, in a framework that balances these factors against each other. These analytical methods tend by their quantitative nature to emphasize the magnitude of risks, costs and alternatives, and to downplay other factors, especially those that are not easily expressed in quantitative terms, that affect acceptance or rejection of risk. Such other factors include the issues of risk perceptions and how and by whom risk decisions are made

  10. Preconcentration of low-grade uranium ores with environmentally acceptable tailings, part I

    International Nuclear Information System (INIS)

    Raicevic, D.; Raicevic, M.; McCarthy, D.R.

    1979-08-01

    The low-grade ore sample used for this investigation originated from Agnew Lake Mines Limited, Espanola, Ontario. It contained about 1% pyrite and 0.057% uranium, mainly as uranothorite with a small amount of brannerite. Both of these minerals occur in the quartz-sericite matrix of a conglomerate. A preconcentration process has been developed to give a high uranium recovery, reject pyrite, radium and thorium from the ore and produce environmentally acceptable tailings. This process applies flotation in combination with high intensity magnetic separation and gravity concentration

  11. Parental acceptability of contraceptive methods offered to their teen during a confidential health care visit.

    Science.gov (United States)

    Hartman, Lauren B; Shafer, Mary-Ann; Pollack, Lance M; Wibbelsman, Charles; Chang, Fay; Tebb, Kathleen P

    2013-02-01

    To examine parental acceptability of contraceptive methods offered confidentially to their adolescent daughter. A random sample of 261 parents/guardians with a daughter aged 12-17 years completed a telephone survey examining the relationship between parental acceptability of seven contraceptive methods and adolescents' likelihood to have sex, parenting beliefs, parents' sexual health as teens, sexually transmitted infection knowledge, and demographic factors. Acceptability was highest for oral contraceptive pills (59%) and lowest for intrauterine device (18%). Parental acceptance of teens' autonomy was significantly associated with increased acceptability of all methods. Parental knowledge of sexually transmitted infections was poor, and 51% found it acceptable for clinicians to provide their sexually active teen with condoms. Parents were more accepting of oral contraceptive pills and condoms compared with intrauterine devices and implants. Parental recognition of their teen's autonomy was associated with greater parental acceptability of clinicians providing their adolescent with contraceptives (regardless of the specific type of method being offered). Copyright © 2013 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  12. ProMES: A method for "accepted control loops"

    NARCIS (Netherlands)

    Tuijl, van H.F.J.M.

    1997-01-01

    ProMES, a method for the measurement and feedback of performance data is related to the concepts of goal setting and feedback (Locke, 1991; Locke and Latham, 1990), and to the concept of self-control (Bandura, 1991). The result is a model for self-management: the "accepted control loop". Whether

  13. An energy performance assessment for indoor environmental quality (IEQ) acceptance in air-conditioned offices

    International Nuclear Information System (INIS)

    Wong, L.T.; Mui, K.W.

    2009-01-01

    Maintaining an acceptable indoor environmental quality (IEQ) for air-conditioned office buildings consumes a considerable amount of thermal energy. This study correlates thermal energy consumption with the overall occupant acceptance of IEQ in some air-conditioned offices. An empirical expression of an IEQ index associated with thermal comfort, indoor air quality, aural and visual comfort is used to benchmark the offices. Employing input parameters obtained from the building stocks of Hong Kong, the office portfolios regarding the thermal energy consumption and the IEQ index are determined by Monte Carlo simulations. In particular, an energy-to-acceptance ratio and an energy-to-IEQ improvement ratio are proposed to measure the performance of energy consumption for the IEQ in the air-conditioned offices. The ratios give the thermal energy consumption corresponding to a desirable percentage of IEQ acceptances and to an IEQ upgrade, respectively. The results showed a non-linear increasing trend of annual thermal energy consumption for IEQ improvement at the offices of higher IEQ benchmarks. The thermal energy consumption for visual comfort and indoor air quality would also be significant in these offices. This study provides useful information that incorporates the IEQ in air-conditioned offices into the development of performance evaluation measures for thermal energy consumption.

  14. 77 FR 21551 - New York City Department of Environmental Protection; Notice of Application Accepted for filing...

    Science.gov (United States)

    2012-04-10

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 13287-004] New York City Department of Environmental Protection; Notice of Application Accepted for filing And Soliciting Motions To Intervene and Protests Take notice that the following hydroelectric application has been filed with the Commission and is available for public...

  15. Public acceptance of nuclear power in the United States - the role of the national environmental policy act

    International Nuclear Information System (INIS)

    Jellinek, S.D.; Brubaker, G.L.

    1977-01-01

    The passage of the National Environmental Policy Act (NEPA) in 1969, required all U.S. Federal agencies to build consideration of the environmental impacts of their proposed activities into their decisionmaking process. It also established the Council on Environmental Quality (CEQ) within the Executive Office of the President to oversee its implementation, and to serve as the principle environmental policy adviser to the President. Agency environmental analyses are documented in an environmental impact statement (EIS) which is prepared prior to deciding if a project or a proposal is to be approved. Today the EIS is the foremost document used by both the Energy Research and Development Administration and the Nuclear Regulatory Commission to achieve public understanding and acceptance of nuclear power facilities in the U.S. At the center of the NEPA process is the opportunity for public comment on proposed projects. Initial public concern was with thermal pollution and the traditional environmental impacts related to power plant construction and operation. Recent interests, however, have been with larger policy issues related to safeguards and management of radioactive wastes. The role of the EIS in resolving these current issues and its role in the debate over future nuclear development in the U.S. is discussed. The provisions of NEPA are representative of the increasing trend worldwide toward greater public involvement in decisions on technology which can affect the future. The development and integration of the EIS into the U.S. nuclear decisionmaking process can provide interesting and valuable insights to other nations concerning the achievement of better public understanding and acceptance of nuclear power through public involvement in the decision process

  16. A comparison of radiological risk assessment methods for environmental restoration

    International Nuclear Information System (INIS)

    Dunning, D.E. Jr.; Peterson, J.M.

    1993-01-01

    Evaluation of risks to human health from exposure to ionizing radiation at radioactively contaminated sites is an integral part of the decision-making process for determining the need for remediation and selecting remedial actions that may be required. At sites regulated under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), a target risk range of 10 -4 to 10 -6 incremental cancer incidence over a lifetime is specified by the US Environmental Protection Agency (EPA) as generally acceptable, based on the reasonable maximum exposure to any individual under current and future land use scenarios. Two primary methods currently being used in conducting radiological risk assessments at CERCLA sites are compared in this analysis. Under the first method, the radiation dose equivalent (i.e., Sv or rem) to the receptors of interest over the appropriate period of exposure is estimated and multiplied by a risk factor (cancer risk/Sv). Alternatively, incremental cancer risk can be estimated by combining the EPA's cancer slope factors (previously termed potency factors) for radionuclides with estimates of radionuclide intake by ingestion and inhalation, as well as radionuclide concentrations in soil that contribute to external dose. The comparison of the two methods has demonstrated that resulting estimates of lifetime incremental cancer risk under these different methods may differ significantly, even when all other exposure assumptions are held constant, with the magnitude of the discrepancy depending upon the dominant radionuclides and exposure pathways for the site. The basis for these discrepancies, the advantages and disadvantages of each method, and the significance of the discrepant results for environmental restoration decisions are presented

  17. Does green consumerism increase the acceptance of wind power?

    International Nuclear Information System (INIS)

    Thøgersen, John; Noblet, Caroline

    2012-01-01

    In this paper, we discuss what might be termed an action-based learning approach to promoting important pro-environmental actions, such as support for or acceptance of environmental policy. Such an approach involves promoting simple and easy behaviours as entry points for more radical steps towards sustainability, referred to as “catalytic” or “wedge” behaviours. Despite the obvious need for innovative approaches to promote important pro-environmental behaviour, and sound theoretical backing for such concepts, there is a lack of research testing the key propositions of this approach. In a survey study based on a random sample of residents of the state of Maine, USA, we find that both everyday “green” behaviour and the acceptance of an expansion of wind power are rooted in environmental concern and that everyday “green” behaviour gives a significant contribution to predicting acceptance of wind power when controlling for environmental concern. Hence, the promotion of everyday “green” behaviours may prepare the grounds for increasing acceptance of more far-reaching changes in the population, such as an expansion of wind power. - Highlights: ► Acceptance of wind power increases with environmental concern. ► So does everyday “green” consumerism. ► Green consumerism further increases acceptance of wind power. ► The effect of environmental concern on acceptance is partly mediated through green consumerism. ► Participants in the study are a random sample of residents of Maine, USA.

  18. Using Financial Information in Continuing Education. Accepted Methods and New Approaches.

    Science.gov (United States)

    Matkin, Gary W.

    This book, which is intended as a resource/reference guide for experienced financial managers and course planners, examines accepted methods and new approaches for using financial information in continuing education. The introduction reviews theory and practice, traditional and new methods, planning and organizational management, and technology.…

  19. Environmentally evaluated HPLC-ELSD method to monitor enzymatic synthesis of a non-ionic surfactant.

    Science.gov (United States)

    Gaber, Yasser; Akerman, Cecilia Orellana; Hatti-Kaul, Rajni

    2014-01-01

    N-Lauroyl-N-methylglucamide is a biodegradable surfactant derived from renewable resources. In an earlier study, we presented an enzymatic solvent-free method for synthesis of this compound. In the present report, the HPLC method developed to follow the reaction between lauric acid/methyl laurate and N-methyl glucamine (MEG) and its environmental assessment are described. Use of ultraviolet (UV) absorption or refractive index (RI) detectors did not allow the detection of N-methyl glucamine (MEG). With Evaporative light scattering detector ELSD, it was possible to apply a gradient elution, and detect MEG with a limit of detection, LOD = 0.12 μg. A good separation of the peaks: MEG, lauric acid, product (amide) and by-product (amide-ester) was achieved with the gradient program with a run time of 40 min. The setting of ELSD detector was optimized using methyl laurate as the analyte. LC-MS/MS was used to confirm the amide and amide-ester peaks. We evaluated the greenness of the developed method using the freely available software HPLC-Environmental Assessment Tool (HPLC-EAT) and the method got a scoring of 73 HPLC-EAT units, implying that the analytical procedure was more environmentally benign compared to some other methods reported in literature whose HPLC-EAT values scored up to 182. Use of ELSD detector allowed the detection and quantification of the substrates and the reaction products of enzymatic synthesis of the surfactant, N-lauroyl-N-methylglucamide. The developed HPLC method has acceptable environmental profile based on HPLC-EAT evaluation.

  20. Controlling corrosion of carbon steel in cooling water applications -- A novel environmentally acceptable approach

    International Nuclear Information System (INIS)

    Banerjee, G.; Miller, A.E.

    1998-01-01

    Cr(VI) containing salts have been in use for a long time as one of the best inhibitors for minimizing corrosion of carbon steel in cooling water applications. Irrespective of the type of system, i.e., once through, open recirculating, pressurized water reactor power plants, etc. and irrespective of the conductivity of water, i.e., low or high, Cr(VI) salts always have proven to be very effective inhibitors. However, the toxicity of chromate compounds and the consequential disposal difficulties have made it essential to look for an alternate treatment. It is however, imperative that the alternate system must provide the matching efficiency as that provided by Cr(VI) salts and that it should also be easy to maintain and be economical. While many researchers have been trying to find a suitable chromate free inhibitor system, the present authors have explored the possibility of formulating an inhibitor system containing Cr(VI) at a concentration below the safety limit for drinking water as suggested by EPA/OSHA. This is based on the assumption that EPA (Environmental Protection Agency) and OSHA (Occupational Safety and Health Administration) only regulate the discharge and exposure limits of chromium above which it is found harmful. Therefore, any new formulation containing Cr(VI) well below these safety limits should be acceptable environmentally. If such a formulation can perform similar to ones with high concentration of Cr(VI), it will also be commercially acceptable. The authors will discuss the preliminary results of such a strategy

  1. Environmentally acceptable thread compounds: Requirements defined

    International Nuclear Information System (INIS)

    Stringfellow, W.D.; Hendriks, R.V.; Jacobs, N.L.

    1993-01-01

    New environmental regulations on thread compounds are now being enforced in several areas with strong maritime tradition and a sensitive environment. These areas include Indonesia, Alaska and portions of Norway. The industry generally recognizes the environmental concerns but, with wider enforcement of regulations imminent, has not been able to define clearly the requirements for environmental compliance. This paper, written in collaboration with The Netherlands State Supervision of Mines, is based on the National Policy on Thread Compounds of The Netherlands. This national policy is representative of policies being followed by other North Sea governments. Similar policies might well be adopted by other governments worldwide. These policies will affect the operator, drilling contractor, and supplier. This paper provides a specific and detailed definition of thread compound requirements by addressing four relevant categories. The categories of interest are regulatory approval, environmental, health, and performance

  2. Acceptance of new sanitation: The role of end-users' pro-environmental personal norms and risk and benefit perceptions.

    Science.gov (United States)

    Poortvliet, P Marijn; Sanders, Liese; Weijma, Jan; De Vries, Jasper R

    2017-12-18

    Current sanitation systems are inherently limited in their ability to address the new challenges for (waste)water management that arise from the rising demand to restore resource cycles. These challenges include removal of micropollutants, water (re)use, and nutrient recovery. New opportunities to address these challenges arise from new sanitation, a system innovation that combines elements of source separation, local treatment and reuse, and less use of water. New sanitation is applied, but not yet widespread, in several residential areas in Europe. Implementation is hindered by the lack of insight into the general public's willingness to engage in new sanitation, and the resulting uncertainty about this among decision makers and other stakeholders in wastewater management. Using value-belief-norm theory as a conceptual lens, this paper addresses the individual motivations (pro-environmental personal norms) and personal drivers (benefits) and barriers (risks) for acceptance of new sanitation by the Dutch general public. The results of an online survey (N = 338) indicated that both pro-environmental personal norms and risk and benefit perceptions predict consumers' willingness to accept new sanitation. More specifically, they showed that consumer acceptance is driven by perceived risks relating to the housing market and the need to change behavior, but also by environmental benefits. Overall, new sanitation was favorably evaluated by respondents: 64% indicated that they would likely use new sanitation if they were owner-occupiers. The results of this explorative study are discussed in light of the development of novel sanitation systems that are sensitive to perceptions of end-users and other key stakeholders. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. International Space Station Environmental Control and Life Support System Acceptance Testing for Node 1 Temperature and Humidity Control Subsystem

    Science.gov (United States)

    Williams, David E.

    2011-01-01

    The International Space Station (ISS) Node 1 Environmental Control and Life Support (ECLS) System is comprised of five subsystems: Atmosphere Control and Storage (ACS), Atmosphere Revitalization (AR), Fire Detection and Suppression (FDS), Temperature and Humidity Control (THC), and Water Recovery and Management (WRM). This paper will provide a summary of the Node 1 ECLS THC subsystem design and a detailed discussion of the ISS ECLS Acceptance Testing methodology utilized for this subsystem.The International Space Station (ISS) Node 1 Environmental Control and Life Support (ECLS) System is comprised of five subsystems: Atmosphere Control and Storage (ACS), Atmosphere Revitalization (AR), Fire Detection and Suppression (FDS), Temperature and Humidity Control (THC), and Water Recovery and Management (WRM). This paper will provide a summary of the Node 1 ECLS THC subsystem design and a detailed discussion of the ISS ECLS Acceptance Testing methodology utilized for this subsystem.

  4. American acceptance of nuclear power

    International Nuclear Information System (INIS)

    Barrett, W.

    1980-01-01

    The characteristic adventurous spirit that built American technology will eventually lead to American acceptance of nuclear power unless an overpowering loss of nerve causes us to reject both nuclear technology and world leadership. The acceptance of new technology by society has always been accompanied by activist opposition to industralization. To resolve the debate between environmental and exploitive extremists, we must accept with humility the basic premise that human accomplishment is a finite part of nature

  5. Methods for environmental change; an exploratory study

    Directory of Open Access Journals (Sweden)

    Kok Gerjo

    2012-11-01

    Full Text Available Abstract Background While the interest of health promotion researchers in change methods directed at the target population has a long tradition, interest in change methods directed at the environment is still developing. In this survey, the focus is on methods for environmental change; especially about how these are composed of methods for individual change (‘Bundling’ and how within one environmental level, organizations, methods differ when directed at the management (‘At’ or applied by the management (‘From’. Methods The first part of this online survey dealt with examining the ‘bundling’ of individual level methods to methods at the environmental level. The question asked was to what extent the use of an environmental level method would involve the use of certain individual level methods. In the second part of the survey the question was whether there are differences between applying methods directed ‘at’ an organization (for instance, by a health promoter versus ‘from’ within an organization itself. All of the 20 respondents are experts in the field of health promotion. Results Methods at the individual level are frequently bundled together as part of a method at a higher ecological level. A number of individual level methods are popular as part of most of the environmental level methods, while others are not chosen very often. Interventions directed at environmental agents often have a strong focus on the motivational part of behavior change. There are different approaches targeting a level or being targeted from a level. The health promoter will use combinations of motivation and facilitation. The manager will use individual level change methods focusing on self-efficacy and skills. Respondents think that any method may be used under the right circumstances, although few endorsed coercive methods. Conclusions Taxonomies of theoretical change methods for environmental change should include combinations of individual

  6. Methods for environmental change; an exploratory study.

    Science.gov (United States)

    Kok, Gerjo; Gottlieb, Nell H; Panne, Robert; Smerecnik, Chris

    2012-11-28

    While the interest of health promotion researchers in change methods directed at the target population has a long tradition, interest in change methods directed at the environment is still developing. In this survey, the focus is on methods for environmental change; especially about how these are composed of methods for individual change ('Bundling') and how within one environmental level, organizations, methods differ when directed at the management ('At') or applied by the management ('From'). The first part of this online survey dealt with examining the 'bundling' of individual level methods to methods at the environmental level. The question asked was to what extent the use of an environmental level method would involve the use of certain individual level methods. In the second part of the survey the question was whether there are differences between applying methods directed 'at' an organization (for instance, by a health promoter) versus 'from' within an organization itself. All of the 20 respondents are experts in the field of health promotion. Methods at the individual level are frequently bundled together as part of a method at a higher ecological level. A number of individual level methods are popular as part of most of the environmental level methods, while others are not chosen very often. Interventions directed at environmental agents often have a strong focus on the motivational part of behavior change.There are different approaches targeting a level or being targeted from a level. The health promoter will use combinations of motivation and facilitation. The manager will use individual level change methods focusing on self-efficacy and skills. Respondents think that any method may be used under the right circumstances, although few endorsed coercive methods. Taxonomies of theoretical change methods for environmental change should include combinations of individual level methods that may be bundled and separate suggestions for methods targeting a level

  7. Methods and techniques for prediction of environmental impact

    International Nuclear Information System (INIS)

    1992-04-01

    Environmental impact assessment (EIA) is the procedure that helps decision makers understand the environmental implications of their decisions. The prediction of environmental effects or impact is an extremely important part of the EIA procedure and improvements in existing capabilities are needed. Considerable attention is paid within environmental impact assessment and in handbooks on EIA to methods for identifying and evaluating environmental impacts. However, little attention is given to the issue distribution of information on impact prediction methods. The quantitative or qualitative methods for the prediction of environmental impacts appear to be the two basic approaches for incorporating environmental concerns into the decision-making process. Depending on the nature of the proposed activity and the environment likely to be affected, a combination of both quantitative and qualitative methods is used. Within environmental impact assessment, the accuracy of methods for the prediction of environmental impacts is of major importance while it provides for sound and well-balanced decision making. Pertinent and effective action to deal with the problems of environmental protection and the rational use of natural resources and sustainable development is only possible given objective methods and techniques for the prediction of environmental impact. Therefore, the Senior Advisers to ECE Governments on Environmental and Water Problems, decided to set up a task force, with the USSR as lead country, on methods and techniques for the prediction of environmental impacts in order to undertake a study to review and analyse existing methodological approaches and to elaborate recommendations to ECE Governments. The work of the task force was completed in 1990 and the resulting report, with all relevant background material, was approved by the Senior Advisers to ECE Governments on Environmental and Water Problems in 1991. The present report reflects the situation, state of

  8. Implementation plan of the environmental impact statement on a proposed policy for acceptance of foreign research reactor spent nuclear fuel

    International Nuclear Information System (INIS)

    Matos, J.E.

    1996-01-01

    This paper provides a summary of selected portions of the United States Department of Energy's ''Implementation Plan for the Environmental Impact Statement on a Proposed Policy for Acceptance of Foreign Research Reactor Spent Nuclear Fuel'', DOE/EIS-0218, October 1994

  9. Climate Change: Implications for the Assumptions, Goals and Methods of Urban Environmental Planning

    Directory of Open Access Journals (Sweden)

    Kristina Hill

    2016-12-01

    -based quantitative models of regional system behavior that may soon be used to determine acceptable land uses. Finally, the philosophical assumptions that underlie urban environmental planning are changing to address new epistemological, ontological and ethical assumptions that support new methods and goals. The inability to use the past as a guide to the future, new prioritizations of values for adaptation, and renewed efforts to focus on intergenerational justice are provided as examples. In order to represent a genuine paradigm shift, this review argues that changes must begin to be evident across the underlying assumptions, conceptual frameworks, and methods of urban environmental planning, and be attributable to the same root cause. The examples presented here represent the early stages of a change in the overall paradigm of the discipline.

  10. Attitude toward, acceptance of and knowledge about female sterilization as a method of contraception.

    Science.gov (United States)

    Erlenwein, J; Kundu, S; Schippert, C; Soergel, P; Hillemanns, P; Staboulidou, I

    2015-02-01

    Surgical sterilization via tubal ligation or the disconnection of the tubes is a method of permanent contraception. The aim of this study was to evaluate the attitude, acceptance and knowledge of women about female sterilization as a method of contraception in terms of the social and cultural backgrounds of those women. Prospective study based on an anonymous questionnaire that analyzed background knowledge, attitude, influence factors and motivation regarding sterilization, as well as the reasons for declining. The questionnaire also attempted to evaluate the effects on the self-esteem of the women, as well as the impact of religious dogma and the related beliefs. One thousand, eight hundred questionnaires were distributed, and 1247 women completed the questionnaire—a response rate of 69.3%. There were mainly positive attitudes toward sterilization as a contraceptive method. Cultural background, including religion and faith; the mother's experiences and point of view; knowledge; family planning and the actual life situation have an influence on the attitudes toward and acceptance of sterilization as a contraceptive method and on the final choice of a contraceptive method. Cultural background and present life situation have a great impact on the attitude toward and acceptance of sterilization as a method of contraception, thus influencing the final choice of a contraceptive method. Detailed counselling about this topic is essential and should be improved. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  11. The affective profiles, psychological well-being, and harmony: environmental mastery and self-acceptance predict the sense of a harmonious life

    Directory of Open Access Journals (Sweden)

    Danilo Garcia

    2014-02-01

    Full Text Available Background. An important outcome from the debate on whether wellness equals happiness, is the need of research focusing on how psychological well-being might influence humans’ ability to adapt to the changing environment and live in harmony. To get a detailed picture of the influence of positive and negative affect, the current study employed the affective profiles model in which individuals are categorised into groups based on either high positive and low negative affect (self-fulfilling; high positive and high negative affect (high affective; low positive and low negative affect (low affective; and high negative and low positive affect (self-destructive. The aims were to (1 investigate differences between affective profiles in psychological well-being and harmony and (2 how psychological well-being and its dimensions relate to harmony within the four affective profiles.Method. 500 participants (mean age = 34.14 years, SD. = ±12.75 years; 187 males and 313 females were recruited online and required to answer three self-report measures: The Positive Affect and Negative Affect Schedule; The Scales of Psychological Well-Being (short version and The Harmony in Life Scale. We conducted a Multivariate Analysis of Variance where the affective profiles and gender were the independent factors and psychological well-being composite score, its six dimensions as well as the harmony in life score were the dependent factors. In addition, we conducted four multi-group (i.e., the four affective profiles moderation analyses with the psychological well-being dimensions as predictors and harmony in life as the dependent variables.Results. Individuals categorised as self-fulfilling, as compared to the other profiles, tended to score higher on the psychological well-being dimensions: positive relations, environmental mastery, self-acceptance, autonomy, personal growth, and purpose in life. In addition, 47% to 66% of the variance of the harmony in life was

  12. Acceptance sampling using judgmental and randomly selected samples

    Energy Technology Data Exchange (ETDEWEB)

    Sego, Landon H.; Shulman, Stanley A.; Anderson, Kevin K.; Wilson, John E.; Pulsipher, Brent A.; Sieber, W. Karl

    2010-09-01

    We present a Bayesian model for acceptance sampling where the population consists of two groups, each with different levels of risk of containing unacceptable items. Expert opinion, or judgment, may be required to distinguish between the high and low-risk groups. Hence, high-risk items are likely to be identifed (and sampled) using expert judgment, while the remaining low-risk items are sampled randomly. We focus on the situation where all observed samples must be acceptable. Consequently, the objective of the statistical inference is to quantify the probability that a large percentage of the unsampled items in the population are also acceptable. We demonstrate that traditional (frequentist) acceptance sampling and simpler Bayesian formulations of the problem are essentially special cases of the proposed model. We explore the properties of the model in detail, and discuss the conditions necessary to ensure that required samples sizes are non-decreasing function of the population size. The method is applicable to a variety of acceptance sampling problems, and, in particular, to environmental sampling where the objective is to demonstrate the safety of reoccupying a remediated facility that has been contaminated with a lethal agent.

  13. Method for environmental risk analysis (MIRA) revision 2007

    International Nuclear Information System (INIS)

    2007-04-01

    OLF's instruction manual for carrying out environmental risk analyses provides a united approach and a common framework for environmental risk assessments. This is based on the best information available. The manual implies standardizations of a series of parameters, input data and partial analyses that are included in the environmental risk analysis. Environmental risk analyses carried out according to the MIRA method will thus be comparable between fields and between companies. In this revision an update of the text in accordance with today's practice for environmental risk analyses and prevailing regulations is emphasized. Moreover, method adjustments for especially protected beach habitats have been introduced, as well as a general method for estimating environmental risk concerning fish. Emphasis has also been put on improving environmental risk analysis' possibilities to contribute to a better management of environmental risk in the companies (ml)

  14. Feasibility and acceptability of environmental management strategies among artisan miners in Taita Taveta County, Kenya

    Directory of Open Access Journals (Sweden)

    Florence Apollo

    2017-01-01

    Full Text Available Artisanal mining employs many people across the globe. In Kenya, it provides vocational jobs which represent the livelihood of poor communities. In spite of the economic value that could be attached to the artisanal mining activities in Taita Taveta County, these activities have resulted in environmental degradation; thus, calling for necessary interventions. It is for this reason that this study intends to examine effective strategies that could be adopted to reduce environmental degradation in the county as a result of artisan mining. The key objective therefore is to test the feasibility and acceptability of community participation, partnerships, modern technology and quarry management strategies on the reduction of environmental degradation by artisan miners in Taita Taveta County. A descriptive case study research design was adopted, and the target population for the study was 451 registered artisan miners and 13 environmental bodies operating in the area. A simple random sampling technique was used to draw a sample of 218 artisan miners and 13 environmental body heads. Questionnaires were the main tool for data collection from which a response rate of 95% was achieved. The study deduced that community participation, partnerships, modern technology adoption and quarry management strategies, are key influences on the reduction of environmental degradation in the artisanal mining sector if adopted, going based on the high level of agreement and the reasoning exhibited among the artisan miners in the findings. The following policies may be inferred from the study: to set a framework to enable the community to participate in environmental conservation, to enhance partnerships between NGOs, CBOs, the Government and Universities within artisan mining areas, to introduce Government subsidies for modern technology for affordability and to introduce a framework for quarry management.

  15. Waste Acceptance System Requirements document (WASRD)

    International Nuclear Information System (INIS)

    1993-01-01

    This Waste Acceptance System Requirements document (WA-SRD) describes the functions to be performed and the technical requirements for a Waste Acceptance System for accepting spent nuclear fuel (SNF) and high-level radioactive waste (HLW) into the Civilian Radioactive Waste Management System (CRWMS). This revision of the WA-SRD addresses the requirements for the acceptance of HLW. This revision has been developed as a top priority document to permit DOE's Office of Environmental Restoration and Waste Management (EM) to commence waste qualification runs at the Savannah River Site's (SRS) Defense Waste Processing Facility (DWPF) in a timely manner. Additionally, this revision of the WA-SRD includes the requirements from the Physical System Requirements -- Accept Waste document for the acceptance of SNF. A subsequent revision will fully address requirements relative to the acceptance of SNF

  16. Study on control method of the actuators accepting commands from different classifications in nuclear power plant

    International Nuclear Information System (INIS)

    Tang Lixue; Zhang Nan; Fan Jin; Li Liang

    2015-01-01

    The distributed control system has become the main control system for the nuclear power plant, consisting of 1E and non-1E parts. Because the safety actuators accept commands from different safety classifications, this is a difficulty of controlling those actuators in nuclear power plant. This article discusses about the control method for safety actuators accepting commands from different classifications. Firstly, one control method adopted in new nuclear power projects is introduced. Then based on this, an optimized method is raised. The new method mainly concludes two points than the adopted method: 1. The concept 'local control mode' is introduced into the signal priority logic modules, and the priority logic module turns into local mode for the non-1E control system once it accepts safety signal; 2. The 'remote control mode' is added into the module of the safety actuator in the non-1E control system, and this can make the non-1E control system abandon controlling the safety actuator when the relevant priority logic module accept the safety signal. Based on verifying the correctness of modified scheme, comparisons between the fore-and-aft schemes are provided to summary the merits of the optimized method. It is concluded that optimized scheme is better in the aspects of reliability, safety and economy. (authors)

  17. Regulatory Acceptance of Alternative Methods in the Development and Approval of Pharmaceuticals.

    Science.gov (United States)

    Beken, Sonja; Kasper, Peter; van der Laan, Jan-Willem

    Animal studies may be carried out to support first administration of a new medicinal product to either humans or the target animal species, or before performing clinical trials in even larger populations, or before marketing authorisation, or to control quality during production. Ethical and animal welfare considerations require that animal use is limited as much as possible. Directive 2010/63/EU on the protection of animals used for scientific purposes unambiguously fosters the application of the principle of the 3Rs when considering the choice of methods to be used.As such, today, the 3Rs are embedded in the relevant regulatory guidance both at the European (European Medicines Agency (EMA)) and (Veterinary) International Conference on Harmonization ((V)ICH) levels. With respect to non-clinical testing requirements for human medicinal products, reduction and replacement of animal testing has been achieved by the regulatory acceptance of new in vitro methods, either as pivotal, supportive or exploratory mechanistic studies. Whilst replacement of animal studies remains the ultimate goal, approaches aimed at reducing or refining animal studies have also been routinely implemented in regulatory guidelines, where applicable. The chapter provides an overview of the implementation of 3Rs in the drafting of non-clinical testing guidelines for human medicinal products at the level of the ICH. In addition, the revision of the ICH S2 guideline on genotoxicity testing and data interpretation for pharmaceuticals intended for human use is discussed as a case study.In October 2010, the EMA established a Joint ad hoc Expert Group (JEG 3Rs) with the mandate to improve and foster the application of 3Rs principles to the regulatory testing of medicinal products throughout their lifecycle. As such, a Guideline on regulatory acceptance of 3R testing approaches was drafted that defines regulatory acceptance and provides guidance on the scientific and technical criteria for regulatory

  18. Biological and chemical tests of contaminated soils to determine bioavailability and environmentally acceptable endpoints (EAE)

    International Nuclear Information System (INIS)

    Montgomery, C.R.; Menzie, C.A.; Pauwells, S.J.

    1995-01-01

    The understanding of the concept of bioavailability of soil contaminants to receptors and its use in supporting the development of EAE is growing but still incomplete. Nonetheless, there is increased awareness of the importance of such data to determine acceptable cleanup levels and achieve timely site closures. This presentation discusses a framework for biological and chemical testing of contaminated soils developed as part of a Gas Research Institute (GRI) project entitled ''Environmentally Acceptable Endpoints in Soil Using a Risk Based Approach to Contaminated Site Management Based on Bioavailability of Chemicals in Soil.'' The presentation reviews the GRI program, and summarizes the findings of the biological and chemical testing section published in the GRI report. The three primary components of the presentation are: (1) defining the concept of bioavailability within the existing risk assessment paradigm, (2) assessing the usefulness of the existing tests to measure bioavailability and test frameworks used to interpret these measurements, and (3) suggesting how a small selection of relevant tests could be incorporated into a flexible testing scheme for soils to address this issue

  19. 75 FR 51058 - Web-Distributed Labeling User Acceptance Pilot

    Science.gov (United States)

    2010-08-18

    ... Acceptance Pilot AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: EPA's Office of...- distributed labeling ``User Acceptance Pilot'' and is soliciting interest from entities potentially willing to participate in this pilot program. Through the User Acceptance Pilot, EPA intends to demonstrate how users...

  20. DOE methods for evaluating environmental and waste management samples

    International Nuclear Information System (INIS)

    Goheen, S.C.; McCulloch, M.; Thomas, B.L.; Riley, R.G.; Sklarew, D.S.; Mong, G.M.; Fadeff, S.K.

    1993-03-01

    DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) provides applicable methods in use by. the US Department of Energy (DOE) laboratories for sampling and analyzing constituents of waste and environmental samples. The development of DOE Methods is supported by the Laboratory Management Division (LMD) of the DOE. This document contains chapters and methods that are proposed for use in evaluating components of DOE environmental and waste management samples. DOE Methods is a resource intended to support sampling and analytical activities that will aid in defining the type and breadth of contamination and thus determine the extent of environmental restoration or waste management actions needed, as defined by the DOE, the US Environmental Protection Agency (EPA), or others

  1. DOE methods for evaluating environmental and waste management samples.

    Energy Technology Data Exchange (ETDEWEB)

    Goheen, S C; McCulloch, M; Thomas, B L; Riley, R G; Sklarew, D S; Mong, G M; Fadeff, S K [eds.; Pacific Northwest Lab., Richland, WA (United States)

    1994-04-01

    DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) provides applicable methods in use by. the US Department of Energy (DOE) laboratories for sampling and analyzing constituents of waste and environmental samples. The development of DOE Methods is supported by the Laboratory Management Division (LMD) of the DOE. This document contains chapters and methods that are proposed for use in evaluating components of DOE environmental and waste management samples. DOE Methods is a resource intended to support sampling and analytical activities that will aid in defining the type and breadth of contamination and thus determine the extent of environmental restoration or waste management actions needed, as defined by the DOE, the US Environmental Protection Agency (EPA), or others.

  2. Acceptability criteria for linear dependence in validating UV-spectrophotometric methods of quantitative determination in forensic and toxicological analysis

    Directory of Open Access Journals (Sweden)

    L. Yu. Klimenko

    2014-08-01

    Full Text Available Introduction. This article is the result of authors’ research in the field of development of the approaches to validation of quantitative determination methods for purposes of forensic and toxicological analysis and devoted to the problem of acceptability criteria formation for validation parameter «linearity/calibration model». The aim of research. The purpose of this paper is to analyse the present approaches to acceptability estimation of the calibration model chosen for method description according to the requirements of the international guidances, to form the own approaches to acceptability estimation of the linear dependence when carrying out the validation of UV-spectrophotometric methods of quantitative determination for forensic and toxicological analysis. Materials and methods. UV-spectrophotometric method of doxylamine quantitative determination in blood. Results. The approaches to acceptability estimation of calibration models when carrying out the validation of bioanalytical methods is stated in international papers, namely «Guidance for Industry: Bioanalytical method validation» (U.S. FDA, 2001, «Standard Practices for Method Validation in Forensic Toxicology» (SWGTOX, 2012, «Guidance for the Validation of Analytical Methodology and Calibration of Equipment used for Testing of Illicit Drugs in Seized Materials and Biological Specimens» (UNODC, 2009 and «Guideline on validation of bioanalytical methods» (ЕМА, 2011 have been analysed. It has been suggested to be guided by domestic developments in the field of validation of analysis methods for medicines and, particularly, by the approaches to validation methods in the variant of the calibration curve method for forming the acceptability criteria of the obtained linear dependences when carrying out the validation of UV-spectrophotometric methods of quantitative determination for forensic and toxicological analysis. The choice of the method of calibration curve is

  3. Public accept for environmental taxes: self-interest, environmental and distributional concerns

    Energy Technology Data Exchange (ETDEWEB)

    Kallbekken, Steffen; Saelen, Haakon

    2010-07-15

    While strongly recommended by economists, it has often been politically difficult to impose taxes on externalities. There is a substantial literature on public attitudes towards environmental taxes. There have, however, been few comprehensive attempts to understand attitudes towards environmental taxes, and few attempts to isolate the effects of selfish and social preferences. The main research question in this paper is which factors influence support for fuel taxation. We propose a model of attitudes towards fuel taxation, and test this model as well as more specific hypotheses, using data from a representative survey of the adult Norwegian population. Our results suggest that support for fuel taxation is best predicted by beliefs about environmental consequences, followed by beliefs about consequences to others. Beliefs about consequences to self ( self interest ) is the factor that explains the least variation in support for fuel taxation. The academically interesting result that support cannot be well explained without capturing a broad range of motivational factors is also highly policy relevant. It implies that there is no magic formula for increasing public support for environmental taxes. There are, however, some issues which can be addressed: trust in how well the government spends the revenue, and the perception that taxation does very little to change behaviour and thus to reduce environmental problems. (Author)

  4. Environmental Warning System Based on the DPSIR Model: A Practical and Concise Method for Environmental Assessment

    Directory of Open Access Journals (Sweden)

    Wenqi Wang

    2018-05-01

    Full Text Available Though we are in urgent need of environmental warnings to slow environmental deterioration, currently, there is no internationally concise method for environmental warnings. In addition, the existing approaches do not combine the three aspects of ecology, resources, and environment. At the same time, the three elements of the environment (air, water, and soil are separated in most environmental warning systems. Thus, the method this paper gives is an innovative attempt and aims to make environmental assessment more practical. This paper establishes the index system of an environmental early warning based on the Driving–Pressure–State–Influence–Response (DPSIR model. The Analytic Hierarchy Process (AHP method was used to determine the weights. Next, single and integrated index methods further assess the environmental warning state, in which the weighted summation method is used to summarize the data and results. The case of Tianjin is used to confirm the applicability of this method. In conclusion, the method in this paper is more well-behaved and, therefore, more suitable to assist cities in their environmental assessment.

  5. Acceptance of Others, Feeling of Being Accepted and Striving for Being Accepted Among the Representatives of Different Kinds of Occupations

    Directory of Open Access Journals (Sweden)

    Gergana Stanoeva

    2012-05-01

    Full Text Available This paper deals with an important issue related to the human attitudes and needs in interpersonal and professional aspects. The theoretical part deals with several psychological components of the self-esteem and esteem of the others – acceptance of the others, feeling of being accepted, need for approval. Some gender differences in manifestations of acceptance and feeling of being accepted at the workplace are discussed. This article presents some empirical data for the degree of acceptance of others, feeling of being accepted and the strive for being accepted among the representatives of helping, pedagogical, administrative and economic occupations, as well as non-qualified workers. The goals of the study were to reveal the interdependency between these constructs and to be found some significant differences between the representatives of the four groups of occupations. The methods of the first study were W. Fey’s scales “Acceptance of others”, and “How do I feel accepted by others”. The method of the second study was Crown and Marlowe Scale for Social Desirability. The results indicated some significant differences in acceptance of others and feeling of being accepted between the non-qualified workers and the representatives of helping, administrative and economic occupations. There were not any significant difference in strive for being accepted between the fouroccupational groups.

  6. Comparative study of environmental impact assessment methods ...

    African Journals Online (AJOL)

    This study aims to introduce and systematically investigate the environmental issues during important decision-making stages. Meanwhile, impacts of development on the environmental components will be also analyzed. This research studies various methods of predicting the environmental changes and determining the ...

  7. Public acceptance for environmental taxes: Self-interest, environmental and distributional concerns

    International Nuclear Information System (INIS)

    Kallbekken, Steffen; Saelen, Hakon

    2011-01-01

    While strongly recommended by economists, it has often been politically difficult to impose taxes on externalities. There is a substantial literature on public attitudes towards environmental taxes. There has, however, been few comprehensive attempts to understand attitudes towards environmental taxes. The main research question in this paper is which factors influence support for fuel taxation. We propose a model of attitudes towards fuel taxation, and test this model as well as more specific hypotheses, using data from a representative survey of the adult Norwegian population. Our results suggest that support for fuel taxation is best predicted by beliefs about environmental consequences, followed by beliefs about consequences to others. Beliefs about consequences to self (self-interest) is the factor that explains the least variation in support for fuel taxation. The academically interesting result that support cannot be well explained without capturing a broad range of motivational factors is also highly policy relevant. It implies that there is no magic formula for increasing public support for environmental taxes. There are, however, some issues which can be addressed: trust in how well the government spends the revenue, and the perception that taxation does very little to change behaviour and thus to reduce environmental problems. - Research highlights: → Which factors influence support for fuel taxation? → We test a model of attitudes towards fuel taxes with data from a Norwegian survey. → Support for fuel taxation best predicted by beliefs about environmental consequences. → Support for fuel taxation followed by beliefs about consequences to others. → Self-interest is the factor that explains the least variation in support.

  8. Public acceptance for environmental taxes: Self-interest, environmental and distributional concerns

    Energy Technology Data Exchange (ETDEWEB)

    Kallbekken, Steffen, E-mail: steffen.kallbekken@cicero.uio.n [CICERO Center for International Climate and Environmental Research-Oslo, PO Box 1129 Blindern, 0318 Oslo (Norway); Saelen, Hakon [CICERO Center for International Climate and Environmental Research-Oslo, PO Box 1129 Blindern, 0318 Oslo (Norway)

    2011-05-15

    While strongly recommended by economists, it has often been politically difficult to impose taxes on externalities. There is a substantial literature on public attitudes towards environmental taxes. There has, however, been few comprehensive attempts to understand attitudes towards environmental taxes. The main research question in this paper is which factors influence support for fuel taxation. We propose a model of attitudes towards fuel taxation, and test this model as well as more specific hypotheses, using data from a representative survey of the adult Norwegian population. Our results suggest that support for fuel taxation is best predicted by beliefs about environmental consequences, followed by beliefs about consequences to others. Beliefs about consequences to self (self-interest) is the factor that explains the least variation in support for fuel taxation. The academically interesting result that support cannot be well explained without capturing a broad range of motivational factors is also highly policy relevant. It implies that there is no magic formula for increasing public support for environmental taxes. There are, however, some issues which can be addressed: trust in how well the government spends the revenue, and the perception that taxation does very little to change behaviour and thus to reduce environmental problems. - Research highlights: {yields} Which factors influence support for fuel taxation? {yields} We test a model of attitudes towards fuel taxes with data from a Norwegian survey. {yields} Support for fuel taxation best predicted by beliefs about environmental consequences. {yields} Support for fuel taxation followed by beliefs about consequences to others. {yields} Self-interest is the factor that explains the least variation in support.

  9. Environmental Chemistry Methods (ECM) Index - N

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with N as the first character.

  10. Environmental Chemistry Methods (ECM) Index - K

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with K as the first character.

  11. Environmental Chemistry Methods (ECM) Index - M

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with M as the first character.

  12. Environmental Chemistry Methods (ECM) Index - R

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with R as the first character.

  13. Environmental Chemistry Methods (ECM) Index - G

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with G as the first character.

  14. Environmental Chemistry Methods (ECM) Index - O

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with O as the first character.

  15. Environmental Chemistry Methods (ECM) Index - S

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with S as the first character.

  16. Environmental Chemistry Methods (ECM) Index - B

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with B as the first character.

  17. Environmental Chemistry Methods (ECM) Index - C

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with C as the first character.

  18. Environmental Chemistry Methods (ECM) Index - F

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with F as the first character.

  19. Environmental Chemistry Methods (ECM) Index - P

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with P as the first character.

  20. Environmental Chemistry Methods (ECM) Index - L

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with L as the first character.

  1. Environmental Chemistry Methods (ECM) Index - H

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with H as the first character.

  2. Environmental Chemistry Methods (ECM) Index - I

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with I as the first character.

  3. Environmental Chemistry Methods (ECM) Index - Z

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with Z as the first character.

  4. Environmental Chemistry Methods (ECM) Index - A

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with A as the first character.

  5. Environmental Chemistry Methods (ECM) Index - E

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with E as the first character.

  6. Environmental Chemistry Methods (ECM) Index - T

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with T as the first character.

  7. Environmental Chemistry Methods (ECM) Index - D

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with D as the first character.

  8. Environmental Chemistry Methods (ECM) Index - Q

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with Q as the first character.

  9. Quality assurance requirements and methods for high level waste package acceptability

    International Nuclear Information System (INIS)

    1992-12-01

    This document should serve as guidance for assigning the necessary items to control the conditioning process in such a way that waste packages are produced in compliance with the waste acceptance requirements. It is also provided to promote the exchange of information on quality assurance requirements and on the application of quality assurance methods associated with the production of high level waste packages, to ensure that these waste packages comply with the requirements for transportation, interim storage and waste disposal in deep geological formations. The document is intended to assist both the operators of conditioning facilities and repositories as well as national authorities and regulatory bodies, involved in the licensing of the conditioning of high level radioactive wastes or in the development of deep underground disposal systems. The document recommends the quality assurance requirements and methods which are necessary to generate data for these parameters identified in IAEA-TECDOC-560 on qualitative acceptance criteria, and indicates where and when the control methods can be applied, e.g. in the operation or commissioning of a process or in the development of a waste package design. Emphasis is on the control of the process and little reliance is placed on non-destructive or destructive testing. Qualitative criteria, relevant to disposal of high level waste, are repository dependent and are not addressed here. 37 refs, 3 figs, 2 tabs

  10. Probabilistic Requirements (Partial) Verification Methods Best Practices Improvement. Variables Acceptance Sampling Calculators: Empirical Testing. Volume 2

    Science.gov (United States)

    Johnson, Kenneth L.; White, K. Preston, Jr.

    2012-01-01

    The NASA Engineering and Safety Center was requested to improve on the Best Practices document produced for the NESC assessment, Verification of Probabilistic Requirements for the Constellation Program, by giving a recommended procedure for using acceptance sampling by variables techniques as an alternative to the potentially resource-intensive acceptance sampling by attributes method given in the document. In this paper, the results of empirical tests intended to assess the accuracy of acceptance sampling plan calculators implemented for six variable distributions are presented.

  11. Criteria for the development and use of the methodology for environmentally-acceptable fossil energy site evaluation and selection. Volume 2. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Eckstein, L.; Northrop, G.; Scott, R.

    1980-02-01

    This report serves as a companion document to the report, Volume 1: Environmentally-Acceptable Fossil Energy Site Evaluation and Selection: Methodology and Users Guide, in which a methodology was developed which allows the siting of fossil fuel conversion facilities in areas with the least environmental impact. The methodology, known as SELECS (Site Evaluation for Energy Conversion Systems) does not replace a site specific environmental assessment, or an environmental impact statement (EIS), but does enhance the value of an EIS by thinning down the number of options to a manageable level, by doing this in an objective, open and selective manner, and by providing preliminary assessment and procedures which can be utilized during the research and writing of the actual impact statement.

  12. Public Acceptance for Sustainable Power Development: Sharing Nepalese Experience

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Dilli Bahadur; Singh, Anju; Shrestha, Sugam

    2007-07-01

    Nepal with 83000 MW of hydropower potential has harnessed only 1% of it. With a target of 8% GDP growth rate needs 15000 MW of hydropower to be exported, by 2012. Which will bring the majority(32%) of its population above the poverty line. For this Nepal ought to develop its hydropower potential maintaining social equity and environmental justice leading towards the sustainable development. One of the key attributes/ingredient to this is Public Participation/Acceptance. Hence, an in depth study was conducted for examining the level of peoples' participation/acceptance. Field visit of 6 projects and questionnaire survey conducted involving 13 groups of stakeholders revealed that public participation were sufficiently done and acceptance was also sought specially after the promulgation of Environmental Legislations. Nepal has no choice other than to develop its hydropower potential for its internal demand and to supply to the neighbouring countries, in the endeavour to reduce/eliminate the poverty, prevailing as a cancer. Henceforth, all the hydropower projects to be developed in the future should be socio-culturally acceptable, economically viable and environmentally benign. For this to happen one of the key ingredients/attributes is the public participation and gaining public acceptance in an effective and efficient manner. (auth)

  13. International Space Station Environmental Control and Life Support System Acceptance Testing for Node 1 Atmosphere Control and Supply Subsystem

    Science.gov (United States)

    Williams, David E.

    2009-01-01

    The International Space Station (ISS) Node 1 Environmental Control and Life Support (ECLS) System is comprised of five subsystems: Atmosphere Control and Supply (ACS), Atmosphere Revitalization (AR), Fire Detection and Suppression (FDS), Temperature and Humidity Control (THC), and Water Recovery and Management (WRM). This paper provides a summary of the Node 1 ECLS ACS subsystem design and a detailed discussion of the ISS ECLS Acceptance Testing methodology utilized for that subsystem.

  14. Methods of Environmental Impact Assessment in Colombia

    Directory of Open Access Journals (Sweden)

    Javier Toro Calderón

    2013-10-01

    Full Text Available The Environmental Impact Assessment (EIA in Colombia constitutes the primary tool for making decisions with respect to projects, works and activities (PWA with potential for significant environmental impacts. In the case of the infrastructure of the PWA, the EIA is mandatory and determines the environmental license (EL for construction and operation. This paper analyzes the methods used to assess the environmental impact of the PWA that have applied for licenses with the Ministry of Environment and Sustainable Development. It was found that the method most frequently used is the qualitative proposal by Conesa, with modifications that reduce the effectiveness of the EIA and favor the subjectivity and bias of the evaluator. Finally a series of recom­mendations to improve the process in the country are proposed.

  15. Computer science handbook. Vol. 13.3. Environmental computer science. Computer science methods for environmental protection and environmental research

    International Nuclear Information System (INIS)

    Page, B.; Hilty, L.M.

    1994-01-01

    Environmental computer science is a new partial discipline of applied computer science, which makes use of methods and techniques of information processing in environmental protection. Thanks to the inter-disciplinary nature of environmental problems, computer science acts as a mediator between numerous disciplines and institutions in this sector. The handbook reflects the broad spectrum of state-of-the art environmental computer science. The following important subjects are dealt with: Environmental databases and information systems, environmental monitoring, modelling and simulation, visualization of environmental data and knowledge-based systems in the environmental sector. (orig.) [de

  16. A Method to Improve the Software Acceptance Criteria for Nuclear Power Plants

    International Nuclear Information System (INIS)

    Suh, Yong Suk; Park, Heui Youn; Son, Ki Sung; Lee, Ki Hyun; Kim, Hyeon Soo

    2005-01-01

    The license is a mandatory process required by a governmental authority and the certification is a voluntary process administrated by a professional community. A software certification is a result of an assessment that the certified software conforms to required criteria or standards. The certification is used as a committed promise to produce a high quality software, so software acquirers are requiring it from their suppliers. For example, US DoD (Department of Defense) requires an achievement of CMMI-SW (Capability Maturity Model Integration-Software) certification for participating in a major military software project. It is commonly said that the purpose of achieving a certification is to improve the product quality. In the nuclear area, a software certification has been rarely concerned with or required for the software used in a safety function of NPPs (Nuclear Power Plants). The safety critical software for NPPs is accepted by the nuclear regulators when the following three criteria are met: acceptable plans should be prepared to control the software development activities, the plans should be followed in an acceptable software life cycle, and the process should produce acceptable design outputs. The acceptance criteria are so abstractive that the nuclear regulators may assess the software development plans, activities, outputs based on their subjective engineering judgments. This is inevitable because a software has invisible or intangible characteristics. It is hard to assess the totality of a software prior to running it. These have caused the judgments to be biased. The regulators may want some objectiveness in assessing how much capability for software development the supplier possesses. In that case, the software certification can assist them for such an assessment. This paper proposes a method to improve the software acceptance criteria by applying the software certification to the criteria. This will assist the regulators to assess the supplier

  17. Evaluation of Environmental Flows in Rivers Using Hydrological Methods (Case study: The Barandozchi River- Urmia Lake Basin

    Directory of Open Access Journals (Sweden)

    S. Mostafavi

    2017-01-01

    study. Materials and Methods: With lack of ecological data, the environmental requirements of the Barandozchi River were investigated using five eco-hydrological methods (1- Tennant, 2- Tessman, 3- Flow Duration Indices, 4- FDC shifting, 5- DRM. Some of these methods are too simplistic and do not take into account the direct hydro-ecological interactions (e.g. Tennant method, and some have been developed for a specific country/region (e.g., DRM, and need to be adapted to a different physiographic environment before they can be reliably applied. Two ecological friendly models GEFC, and DRM were tested to estimate the environmental flow of this river. The results were compared with corresponding flows allocated for the release from the Barandoz Dam (currently under construction. Results and Discussion: The prediction of the mean annual environmental flows from five eco-hydrological methods are presented and compared with the corresponding value reported in the downstream dam’s documents. The ultimate decision making based on the potential flows in the river, the environmental class of the river management, and engineering judgment is also recommended for the flows in the river towards the Urmia Lake. The results indicated that the flow allocation for the river environment (4% of mean annual flows is not sufficient to meet the minimum flow requirements for any of the targeting species in the river ecosystem. In order to maintain the Barandozchi River at minimum acceptable environmental status (i.e. Class C of environmental management, an average annual flow of 1.9 m3/s (26% MAR are to be provided. The distribution of monthly flow rates in the river is also recommended for sustaining the Barandozchi River life. Conclusion: The provision for the minimum ecological flows was investigated in the Barandozchi River ecosystem. The results indicated that, in order to maintain the Barandozchi River at minimum acceptable environmental status (i.e. Class C, an average annual flow

  18. How much do we value the environment? The acceptation of environmental policy and environmental measures; Wat is het milieu ons waard? De acceptatie van milieubeleid en milieumaatregelen

    Energy Technology Data Exchange (ETDEWEB)

    Mulder, S.; Verhue, D.; Adriaansen, M. [TNS Nipo Consult/Veldkamp, Amsterdam (Netherlands)

    2005-09-12

    Several surveys were conducted to investigate the public opinion in the Netherlands on the environment. The subjects investigated were: climatic change, air pollution, biodiversity, noise and soil pollution, and nature in the Netherlands. Special attention was paid to the willingness of the Dutch to accept specific environmental measures and a marketing strategy for new environmental policy. The purpose of the surveys is to broaden the support of the Dutch people for the environmental policy. [Dutch] Een analyse is gemaakt van de opvattingen van de burger rondom het milieu. Diverse enquetes zijn uitgevoerd vor de onderwerpen klimaatverandering, luchtverontreiniging, biodiversiteit, geluidsoverlast, natuur in Nederland, en bodemverontreiniging. De aandacht moest daarbij uitgaan naar de bereidheid van burgers om milieumaatregelen te accepteren. Daarnaast was aandacht gewenst voor een marketingstrategie voor nieuw milieubeleid, waarbij gedifferentieerd wordt naar de belevingswereld van verschillende segmenten burgers. Door in te spelen op behoeften van deze segmenten ten aanzien van overheidsbeleid kan het draagvlak voor milieubeleid worden vergroot.

  19. Bridging the Gap between Social Acceptance and Ethical Acceptability.

    Science.gov (United States)

    Taebi, Behnam

    2017-10-01

    New technology brings great benefits, but it can also create new and significant risks. When evaluating those risks in policymaking, there is a tendency to focus on social acceptance. By solely focusing on social acceptance, we could, however, overlook important ethical aspects of technological risk, particularly when we evaluate technologies with transnational and intergenerational risks. I argue that good governance of risky technology requires analyzing both social acceptance and ethical acceptability. Conceptually, these two notions are mostly complementary. Social acceptance studies are not capable of sufficiently capturing all the morally relevant features of risky technologies; ethical analyses do not typically include stakeholders' opinions, and they therefore lack the relevant empirical input for a thorough ethical evaluation. Only when carried out in conjunction are these two types of analysis relevant to national and international governance of risky technology. I discuss the Rawlsian wide reflective equilibrium as a method for marrying social acceptance and ethical acceptability. Although the rationale of my argument is broadly applicable, I will examine the case of multinational nuclear waste repositories in particular. This example will show how ethical issues may be overlooked if we focus only on social acceptance, and will provide a test case for demonstrating how the wide reflective equilibrium can help to bridge the proverbial acceptance-acceptability gap. © 2016 The Authors Risk Analysis published by Wiley Periodicals, Inc. on behalf of Society for Risk Analysis.

  20. Method and system for environmentally adaptive fault tolerant computing

    Science.gov (United States)

    Copenhaver, Jason L. (Inventor); Jeremy, Ramos (Inventor); Wolfe, Jeffrey M. (Inventor); Brenner, Dean (Inventor)

    2010-01-01

    A method and system for adapting fault tolerant computing. The method includes the steps of measuring an environmental condition representative of an environment. An on-board processing system's sensitivity to the measured environmental condition is measured. It is determined whether to reconfigure a fault tolerance of the on-board processing system based in part on the measured environmental condition. The fault tolerance of the on-board processing system may be reconfigured based in part on the measured environmental condition.

  1. Public acceptance of small reactors

    International Nuclear Information System (INIS)

    McDougall, D.S.

    1997-01-01

    The success of any nuclear program requires acceptance by the local public and all levels of government involved in the decision to initiate a reactor program. Public acceptance of a nuclear energy source is a major challenge in successful initiation of a small reactor program. In AECL's experience, public acceptance will not be obtained until the public is convinced that the specific nuclear program is needed, safe and economic and environmental benefit to the community. The title of public acceptance is misleading. The objective of the program is a fully informed public. The program proponent cannot force public acceptance, which is beyond his control. He can, however, ensure that the public is informed. Once information has begun to flow to the public by various means as will be explained later, the proponent is responsible to ensure that the information that is provided by him and by others is accurate. Most importantly, and perhaps most difficult to accomplish, the proponent must develop a consultative process that allows the proponent and the public to agree on actions that are acceptable to the proponent and the community

  2. The multicriteria method for environmentally oriented business decision-making

    Directory of Open Access Journals (Sweden)

    Čančer Vesna

    2004-01-01

    Full Text Available Stimulated by the expressed managers’ need for some completed methods for environmental management in enterprises, we present the method for environmentally oriented business decision-making. It is based on simulations where optimization models of business processes are used as scenarios. The possibilities for an integrated approach to environmental protection are introduced and – decomposed according to the type of the considered element by using zero-one variables – included in the optimization models. The method is completed for multicriteria decision-making where in the simulations obtained optimal values are included. In a real-life case where the Analytic Hierarchy Process technique is used to evaluate environmentally oriented business processes, special attention is given to criteria and weights: we consider preferences and survey findings on the environmental impact of business processes in the enterprise, survey findings on environmental management in the processing industry, and ecobalances.

  3. Hanford Site solid waste acceptance criteria

    International Nuclear Information System (INIS)

    Ellefson, M.D.

    1998-01-01

    Order 5820.2A requires that each treatment, storage, and/or disposal facility (referred to in this document as TSD unit) that manages low-level or transuranic waste (including mixed waste and TSCA PCB waste) maintain waste acceptance criteria. These criteria must address the various requirements to operate the TSD unit in compliance with applicable safety and environmental requirements. This document sets forth the baseline criteria for acceptance of radioactive waste at TSD units operated by WMH. The criteria for each TSD unit have been established to ensure that waste accepted can be managed in a manner that is within the operating requirements of the unit, including environmental regulations, DOE Orders, permits, technical safety requirements, waste analysis plans, performance assessments, and other applicable requirements. Acceptance criteria apply to the following TSD units: the Low-Level Burial Grounds (LLBG) including both the nonregulated portions of the LLBG and trenches 31 and 34 of the 218-W-5 Burial Ground for mixed waste disposal; Central Waste Complex (CWC); Waste Receiving and Processing Facility (WRAP); and T Plant Complex. Waste from all generators, both from the Hanford Site and from offsite facilities, must comply with these criteria. Exceptions can be granted as provided in Section 1.6. Specific waste streams could have additional requirements based on the 1901 identified TSD pathway. These requirements are communicated in the Waste Specification Records (WSRds). The Hanford Site manages nonradioactive waste through direct shipments to offsite contractors. The waste acceptance requirements of the offsite TSD facility must be met for these nonradioactive wastes. This document does not address the acceptance requirements of these offsite facilities

  4. Nuclear methods in environmental and energy research

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, J R [ed.

    1980-01-01

    A total of 75 papers were presented on nuclear methods for analysis of environmental and biological samples. Sessions were devoted to software and mathematical methods; nuclear methods in atmospheric and water research; nuclear and atomic methodology; nuclear methods in biology and medicine; and nuclear methods in energy research.

  5. Nuclear methods in environmental and energy research

    International Nuclear Information System (INIS)

    Vogt, J.R.

    1980-01-01

    A total of 75 papers were presented on nuclear methods for analysis of environmental and biological samples. Sessions were devoted to software and mathematical methods; nuclear methods in atmospheric and water research; nuclear and atomic methodology; nuclear methods in biology and medicine; and nuclear methods in energy research

  6. Radiochemistry methods in DOE methods for evaluating environmental and waste management samples

    International Nuclear Information System (INIS)

    Fadeff, S.K.; Goheen, S.C.

    1994-08-01

    Current standard sources of radiochemistry methods are often inappropriate for use in evaluating US Department of Energy environmental and waste management (DOE/EW) samples. Examples of current sources include EPA, ASTM, Standard Methods for the Examination of Water and Wastewater and HASL-300. Applicability of these methods is limited to specific matrices (usually water), radiation levels (usually environmental levels), and analytes (limited number). Radiochemistry methods in DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) attempt to fill the applicability gap that exists between standard methods and those needed for DOE/EM activities. The Radiochemistry chapter in DOE Methods includes an ''analysis and reporting'' guidance section as well as radiochemistry methods. A basis for identifying the DOE/EM radiochemistry needs is discussed. Within this needs framework, the applicability of standard methods and targeted new methods is identified. Sources of new methods (consolidated methods from DOE laboratories and submissions from individuals) and the methods review process will be discussed. The processes involved in generating consolidated methods add editing individually submitted methods will be compared. DOE Methods is a living document and continues to expand by adding various kinds of methods. Radiochemistry methods are highlighted in this paper. DOE Methods is intended to be a resource for methods applicable to DOE/EM problems. Although it is intended to support DOE, the guidance and methods are not necessarily exclusive to DOE. The document is available at no cost through the Laboratory Management Division of DOE, Office of Technology Development

  7. Survey of methods for improving operator acceptance of computerized aids

    International Nuclear Information System (INIS)

    Frey, P.R.; Kisner, R.A.

    1982-04-01

    The success of current attempts to improve the operational performance and safety of nuclear power plants by installing computerized operational aids in the control rooms is dependent, in part, on the operator's attitude toward the aid. Utility experience with process computer systems indicates that problems may already exist with operator acceptance of computerized aids. The growth of the role that computers have in nuclear power plants makes user acceptance of computer technology an important issue for the nuclear industry. The purpose of this report is to draw from the literature factors related to user acceptance of computerized equipment that may also be applicable to the acceptance of computerized aids used in the nuclear power plant control room

  8. Survey of methods for improving operator acceptance of computerized aids

    Energy Technology Data Exchange (ETDEWEB)

    Frey, P. R.; Kisner, R. A.

    1982-04-01

    The success of current attempts to improve the operational performance and safety of nuclear power plants by installing computerized operational aids in the control rooms is dependent, in part, on the operator's attitude toward the aid. Utility experience with process computer systems indicates that problems may already exist with operator acceptance of computerized aids. The growth of the role that computers have in nuclear power plants makes user acceptance of computer technology an important issue for the nuclear industry. The purpose of this report is to draw from the literature factors related to user acceptance of computerized equipment that may also be applicable to the acceptance of computerized aids used in the nuclear power plant control room.

  9. Nuclear methods in environmental and energy research

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, J. R. [ed.

    1977-01-01

    The topics considered in the seven sessions were nuclear methods in atmospheric research; nuclear and atomic methodology; nuclear methods in tracer applications; energy exploration, production, and utilization; nuclear methods in environmental monitoring; nuclear methods in water research; and nuclear methods in biological research. Individual abstracts were prepared for each paper. (JSR)

  10. Alternative methods of flexible base compaction acceptance.

    Science.gov (United States)

    2012-11-01

    "This report presents the results from the second year of research work investigating issues with flexible base acceptance testing within the Texas Department of Transportation. This second year of work focused on shadow testing non-density-based acc...

  11. Environmental Chemistry Methods (ECM) Index - 0-9

    Science.gov (United States)

    Laboratories use testing methods to identify pesticides in water and soil. Environmental chemistry methods test soil and water samples to determine the fate of pesticides in the environment. Find methods for chemicals with a number as the first character.

  12. Acceptance and Utilization of Technology (UTAUT) as a Method of Technology Acceptance Model of Mitigation Disaster Website

    Science.gov (United States)

    Siswanto, T.; Shofiati, R.; Hartini, H.

    2018-01-01

    www.mitigasi-bencana.com as a knowledge management website created based on survey results in April-July 2014 in East Java and Central Java provinces, indicates a gap between the expectations and reality that exist in the services provided by the regional disaster management agency. Based on condition analysis, the gaps that occur can be reduced if the community has the understanding and knowledge of adequate disaster mitigation. The problem that arises later is whether the chosen technology solution is appropriate and acceptable to the public? The methodology used in this study using the Technology Acceptance Model development is the Unified Theory of Acceptance and Utilization of Technology (UTAUT). Feedback obtained from respondents KarangTaruna youth SelogedongBantul, www.mitigasi-bencana.com can be accepted by the respondents, but from processed data is obtained only UTAUT hypotheses on the relationship dimension eligible for Social Expectancy on the Attitude toward technology, which means the higher the perception of the Social Expectancy, the higher the perception of the Attitude toward technology. Because www.mitigasi-bencana.com is new socialized so that society still need time to explore content information and knowledge contained therein. To be accepted by user, a knowledge management application must prepare various aspects of Performance Expectancy, Effort Expectancy, Social Factors, Facilitating Conditions and Attitude.

  13. Novel method to achieve price-optimized, fully nutritious, health-promoting and acceptable national food baskets

    DEFF Research Database (Denmark)

    Parlesak, Alexandr; Robertson, Aileen

    2015-01-01

    available foods. The study was designed to obtain healthy, affordable, and socially acceptable diets for three European countries (Denmark, Slovenia, and Romania) and in three regions within Canada, Argentina, and Switzerland. Moreover, the costs for the “limiting” micronutrients and relative price......Purpose: The purpose of this study was to generate a framework for the development of health-promoting, fully nutritious, socially acceptable, and affordable national food baskets to be used as an advocacy tool by governments. In addition to containing all (micro-)nutrient requirements, food...... baskets should also reflect dietary guidelines to prevent non-communicable diseases and be optimized to achieve the highest possible social acceptance. So far, integrative approaches that include all these aspects are lacking. Methods: Food composition, local availability, food prices, national...

  14. Short version of the 1996 environmental expertise on the implementation of a sustainable, environmentally acceptable development. Conclusions and recommendations for action; Kurzfassung des Umweltgutachtens 1996 zur Umsetzung einer dauerhaft-umweltgerechten Entwicklung. Schlussfolgerungen und Handlungsempfehlungen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The aim of the present expertise is to set new orientation marks for the tedious, conflict-laden procedure of bringing the ideal of a sustainable, environmentally acceptable development to realisation. By submitting this expertise the Environmental Council has acted in accordance with its assignment to report periodically on certain well-defined issues; specifically, to analyse generic questions of environmental protection, describe the environmental situation in Germany with regard to selected sectors of environmental protection, and give a critical valuation of current environmental policy. (orig./SR) [Deutsch] Das vorliegende Gutachten hat das Ziel, weitere Markierungen fuer den langwierigen und konflikttraechtigen Weg zur Umsetzung des Leitbildes einer dauerhaft-umweltgerechten Entwicklung zu setzen. Der Umweltrat kommt auch in diesem Gutachten seinem Auftrag nach, im Rahmen der periodischen Begutachtung uebergreifende Fragen des Umweltschutzes zu analysieren und fuer ausgewaehlte Umweltschutzsektoren die Umweltsituation in Deutschland zu beschreiben und die Umweltpolitik kritisch zu bewerten. (orig./SR)

  15. Can French environmental taxes really turn into green taxes? Current status and conditions of acceptability

    International Nuclear Information System (INIS)

    Chiroleu-Assouline, Mireille

    2015-01-01

    French environmental taxes are not really ecologically oriented. Their main aim is to raise revenues. Clear signs of this inappropriate direction are given by the large share of the energy taxes and by the low level of most tax rates, which for the most part, are only implicit tax rates on the polluting goods. An ecological tax reform would imply a global green tax shift with tax rates proportionate to the marginal damages. The success and the acceptation of such a reform by the taxpayers rely on the chosen recycling mechanism for the tax revenues, on government's efforts in information and pedagogy, on transparency about the policy choices but also, somehow paradoxically, on audacity of actions. Initially published in 'Revue de l'OFCE', No. 139

  16. Methods for environmental change; an exploratory study

    NARCIS (Netherlands)

    Nell Gottlieb; Robert Panne; Chris Smerecnik; Gerjo Kok

    2012-01-01

    Background: While the interest of health promotion researchers in change methods directed at the target population has a long tradition, interest in change methods directed at the environment is still developing. In this survey, the focus is on methods for environmental change; especially about how

  17. Environmental radiation monitoring system

    International Nuclear Information System (INIS)

    Kato, Tsutomu; Shioiri, Masatoshi; Sakamaki, Tsuyoshi

    2007-01-01

    Environmental radiation monitoring systems are used to measure and monitoring gamma-rays at the observation boundaries of nuclear facilities and in the surrounding areas. In recent years, however, few new nuclear facilities have been constructed and the monitoring systems shift to renewal of existing systems. In addition, in order to increase public acceptance, the facilities are being equipped with communication lines to provide data to prefectural environmental centers. In this text, we introduce the latest technology incorporated in replacement of environmental radiation monitoring systems. We also introduce a replacement method that can shorten the duration during which environmental dose rate measurement is interrupted by enabling both the replacement system and the system being replaced to perform measurements in parallel immediately before and after the replacement. (author)

  18. Methodological proposal for environmental impact evaluation since different specific methods

    International Nuclear Information System (INIS)

    Leon Pelaez, Juan Diego; Lopera Arango Gabriel Jaime

    1999-01-01

    Some conceptual and practical elements related to environmental impact evaluation are described and related to the preparation of technical reports (environmental impact studies and environmental management plans) to be presented to environmental authorities for obtaining the environmental permits for development projects. In the first part of the document a summary of the main aspects of normative type is made that support the studies of environmental impact in Colombia. We propose a diagram for boarding and elaboration of the evaluation of environmental impact, which begins with the description of the project and of the environmental conditions in the area of the same. Passing then to identify the impacts through a method matricial and continuing with the quantitative evaluation of the same. For which we propose the use of the method developed by Arboleda (1994). Also we propose to qualify the activities of the project and the components of the environment in their relative importance, by means of a method here denominated agglomerate evaluation. Which allows finding those activities more impacting and the mostly impacted components. Lastly it is presented some models for the elaboration and presentation of the environmental management plans. The pursuit programs and those of environmental supervision

  19. Environmental dosimetry

    International Nuclear Information System (INIS)

    Gold, R.

    1977-01-01

    For more than 60 years, natural radiation has offered broad opportunities for basic research as evidenced by many fundamental discoveries. Within the last decade, however, dramatic changes have occurred in the motivation and direction of this research. The urgent need for economical energy sources entailing acceptably low levels of environmental impact has compelled the applied aspects of our radiation environment to become overriding considerations. It is within this general framework that state-of-the-art environmental dosimetry techniques are reviewed. Although applied motivation and relevance underscores the current milieu for both reactor and environmental dosimetry, a perhaps even more unifying force is the broad similarity of reactor and environmental radiation fields. In this review, a comparison of these two mixed radiation fields is presented stressing the underlying similarities that exist. On this basis, the evolution of a strong inner bond between dosimetry methods for both reactor and environmental radiation fields is described. The existence of this bond will be illustrated using representative examples of observed spectra. Dosimetry methods of particularly high applicability for both of these fields are described. Special emphasis is placed on techniques of high sensitivity and absolute accuracy which are capable of resolving the components of these mixed radiation fields

  20. Methods for verifying compliance with low-level radioactive waste acceptance criteria

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-09-01

    This report summarizes the methods that are currently employed and those that can be used to verify compliance with low-level radioactive waste (LLW) disposal facility waste acceptance criteria (WAC). This report presents the applicable regulations representing the Federal, State, and site-specific criteria for accepting LLW. Typical LLW generators are summarized, along with descriptions of their waste streams and final waste forms. General procedures and methods used by the LLW generators to verify compliance with the disposal facility WAC are presented. The report was written to provide an understanding of how a regulator could verify compliance with a LLW disposal facility`s WAC. A comprehensive study of the methodology used to verify waste generator compliance with the disposal facility WAC is presented in this report. The study involved compiling the relevant regulations to define the WAC, reviewing regulatory agency inspection programs, and summarizing waste verification technology and equipment. The results of the study indicate that waste generators conduct verification programs that include packaging, classification, characterization, and stabilization elements. The current LLW disposal facilities perform waste verification steps on incoming shipments. A model inspection and verification program, which includes an emphasis on the generator`s waste application documentation of their waste verification program, is recommended. The disposal facility verification procedures primarily involve the use of portable radiological survey instrumentation. The actual verification of generator compliance to the LLW disposal facility WAC is performed through a combination of incoming shipment checks and generator site audits.

  1. Methods for verifying compliance with low-level radioactive waste acceptance criteria

    International Nuclear Information System (INIS)

    1993-09-01

    This report summarizes the methods that are currently employed and those that can be used to verify compliance with low-level radioactive waste (LLW) disposal facility waste acceptance criteria (WAC). This report presents the applicable regulations representing the Federal, State, and site-specific criteria for accepting LLW. Typical LLW generators are summarized, along with descriptions of their waste streams and final waste forms. General procedures and methods used by the LLW generators to verify compliance with the disposal facility WAC are presented. The report was written to provide an understanding of how a regulator could verify compliance with a LLW disposal facility's WAC. A comprehensive study of the methodology used to verify waste generator compliance with the disposal facility WAC is presented in this report. The study involved compiling the relevant regulations to define the WAC, reviewing regulatory agency inspection programs, and summarizing waste verification technology and equipment. The results of the study indicate that waste generators conduct verification programs that include packaging, classification, characterization, and stabilization elements. The current LLW disposal facilities perform waste verification steps on incoming shipments. A model inspection and verification program, which includes an emphasis on the generator's waste application documentation of their waste verification program, is recommended. The disposal facility verification procedures primarily involve the use of portable radiological survey instrumentation. The actual verification of generator compliance to the LLW disposal facility WAC is performed through a combination of incoming shipment checks and generator site audits

  2. Project Method, as One of the Basic Methods of Environmental Education

    Science.gov (United States)

    Szállassy, Noémi

    2008-01-01

    Our aim was to present in this paper the one of the most important methods of environmental education, the project method. We present here the steps and phases of project method and we give an example of how to use these elements in planning an activity for celebrating the World Day for Water.

  3. Sampling method of environmental radioactivity monitoring

    International Nuclear Information System (INIS)

    1984-01-01

    This manual provides sampling methods of environmental samples of airborne dust, precipitated dust, precipitated water (rain or snow), fresh water, soil, river sediment or lake sediment, discharged water from a nuclear facility, grains, tea, milk, pasture grass, limnetic organisms, daily diet, index organisms, sea water, marine sediment, marine organisms, and that for tritium and radioiodine determination for radiation monitoring from radioactive fallout or radioactivity release by nuclear facilities. This manual aims at the presentation of standard sampling procedures for environmental radioactivity monitoring regardless of monitoring objectives, and shows preservation method of environmental samples acquired at the samplingpoint for radiation counting for those except human body. Sampling techniques adopted in this manual is decided by the criteria that they are suitable for routine monitoring and any special skillfulness is not necessary. Based on the above-mentioned principle, this manual presents outline and aims of sampling, sampling position or object, sampling quantity, apparatus, equipment or vessel for sampling, sampling location, sampling procedures, pretreatment and preparation procedures of a sample for radiation counting, necessary recording items for sampling and sample transportation procedures. Special attention is described in the chapter of tritium and radioiodine because these radionuclides might be lost by the above-mentioned sample preservation method for radiation counting of less volatile radionuclides than tritium or radioiodine. (Takagi, S.)

  4. Steroid hormones in environmental matrices: extraction method comparison.

    Science.gov (United States)

    Andaluri, Gangadhar; Suri, Rominder P S; Graham, Kendon

    2017-11-09

    The U.S. Environmental Protection Agency (EPA) has developed methods for the analysis of steroid hormones in water, soil, sediment, and municipal biosolids by HRGC/HRMS (EPA Method 1698). Following the guidelines provided in US-EPA Method 1698, the extraction methods were validated with reagent water and applied to municipal wastewater, surface water, and municipal biosolids using GC/MS/MS for the analysis of nine most commonly detected steroid hormones. This is the first reported comparison of the separatory funnel extraction (SFE), continuous liquid-liquid extraction (CLLE), and Soxhlet extraction methods developed by the U.S. EPA. Furthermore, a solid phase extraction (SPE) method was also developed in-house for the extraction of steroid hormones from aquatic environmental samples. This study provides valuable information regarding the robustness of the different extraction methods. Statistical analysis of the data showed that SPE-based methods provided better recovery efficiencies and lower variability of the steroid hormones followed by SFE. The analytical methods developed in-house for extraction of biosolids showed a wide recovery range; however, the variability was low (≤ 7% RSD). Soxhlet extraction and CLLE are lengthy procedures and have been shown to provide highly variably recovery efficiencies. The results of this study are guidance for better sample preparation strategies in analytical methods for steroid hormone analysis, and SPE adds to the choice in environmental sample analysis.

  5. Radiochemistry methods in DOE Methods for Evaluating Environmental and Waste Management Samples: Addressing new challenges

    International Nuclear Information System (INIS)

    Fadeff, S.K.; Goheen, S.C.; Riley, R.G.

    1994-01-01

    Radiochemistry methods in Department of Energy Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) add to the repertoire of other standard methods in support of U.S. Department of Energy environmental restoration and waste management (DOE/EM) radiochemical characterization activities. Current standard sources of radiochemistry methods are not always applicable for evaluating DOE/EM samples. Examples of current sources include those provided by the US Environmental Protection Agency, the American Society for Testing and Materials, Standard Methods for the Examination of Water and Wastewater, and Environmental Measurements Laboratory Procedures Manual (HASL-300). The applicability of these methods is generally limited to specific matrices (usually water), low-level radioactive samples, and a limited number of analytes. DOE Methods complements these current standard methods by addressing the complexities of EM characterization needs. The process for determining DOE/EM radiochemistry characterization needs is discussed. In this context of DOE/EM needs, the applicability of other sources of standard radiochemistry methods is defined, and gaps in methodology are identified. Current methods in DOE Methods and the EM characterization needs they address are discussed. Sources of new methods and the methods incorporation process are discussed. The means for individuals to participate in (1) identification of DOE/EM needs, (2) the methods incorporation process, and (3) submission of new methods are identified

  6. A QSAR Study of Environmental Estrogens Based on a Novel Variable Selection Method

    Directory of Open Access Journals (Sweden)

    Aiqian Zhang

    2012-05-01

    Full Text Available A large number of descriptors were employed to characterize the molecular structure of 53 natural, synthetic, and environmental chemicals which are suspected of disrupting endocrine functions by mimicking or antagonizing natural hormones and may thus pose a serious threat to the health of humans and wildlife. In this work, a robust quantitative structure-activity relationship (QSAR model with a novel variable selection method has been proposed for the effective estrogens. The variable selection method is based on variable interaction (VSMVI with leave-multiple-out cross validation (LMOCV to select the best subset. During variable selection, model construction and assessment, the Organization for Economic Co-operation and Development (OECD principles for regulation of QSAR acceptability were fully considered, such as using an unambiguous multiple-linear regression (MLR algorithm to build the model, using several validation methods to assessment the performance of the model, giving the define of applicability domain and analyzing the outliers with the results of molecular docking. The performance of the QSAR model indicates that the VSMVI is an effective, feasible and practical tool for rapid screening of the best subset from large molecular descriptors.

  7. User Acceptance of Wrist-Worn Activity Trackers Among Community-Dwelling Older Adults: Mixed Method Study.

    Science.gov (United States)

    Puri, Arjun; Kim, Ben; Nguyen, Olivier; Stolee, Paul; Tung, James; Lee, Joon

    2017-11-15

    Wearable activity trackers are newly emerging technologies with the anticipation for successfully supporting aging-in-place. Consumer-grade wearable activity trackers are increasingly ubiquitous in the market, but the attitudes toward, as well as acceptance and voluntary use of, these trackers in older population are poorly understood. The aim of this study was to assess acceptance and usage of wearable activity trackers in Canadian community-dwelling older adults, using the potentially influential factors as identified in literature and technology acceptance model. A mixed methods design was used. A total of 20 older adults aged 55 years and older were recruited from Southwestern Ontario. Participants used 2 different wearable activity trackers (Xiaomi Mi Band and Microsoft Band) separately for each segment in the crossover design study for 21 days (ie, 42 days total). A questionnaire was developed to capture acceptance and experience at the end of each segment, representing 2 different devices. Semistructured interviews were conducted with 4 participants, and a content analysis was performed. Participants ranged in age from 55 years to 84 years (mean age: 64 years). The Mi Band gained higher levels of acceptance (16/20, 80%) compared with the Microsoft Band (10/20, 50%). The equipment characteristics dimension scored significantly higher for the Mi Band (Ptechnology acceptance (Paccepting of wearable activity trackers, and they had a clear understanding of its value for their lives. Wearable activity trackers were uniquely considered more personal than other types of technologies, thereby the equipment characteristics including comfort, aesthetics, and price had a significant impact on the acceptance. Results indicated that privacy was less of concern for older adults, but it may have stemmed from a lack of understanding of the privacy risks and implications. These findings add to emerging research that investigates acceptance and factors that may influence

  8. Local tolerance testing under REACH: Accepted non-animal methods are not on equal footing with animal tests.

    Science.gov (United States)

    Sauer, Ursula G; Hill, Erin H; Curren, Rodger D; Raabe, Hans A; Kolle, Susanne N; Teubner, Wera; Mehling, Annette; Landsiedel, Robert

    2016-07-01

    In general, no single non-animal method can cover the complexity of any given animal test. Therefore, fixed sets of in vitro (and in chemico) methods have been combined into testing strategies for skin and eye irritation and skin sensitisation testing, with pre-defined prediction models for substance classification. Many of these methods have been adopted as OECD test guidelines. Various testing strategies have been successfully validated in extensive in-house and inter-laboratory studies, but they have not yet received formal acceptance for substance classification. Therefore, under the European REACH Regulation, data from testing strategies can, in general, only be used in so-called weight-of-evidence approaches. While animal testing data generated under the specific REACH information requirements are per se sufficient, the sufficiency of weight-of-evidence approaches can be questioned under the REACH system, and further animal testing can be required. This constitutes an imbalance between the regulatory acceptance of data from approved non-animal methods and animal tests that is not justified on scientific grounds. To ensure that testing strategies for local tolerance testing truly serve to replace animal testing for the REACH registration 2018 deadline (when the majority of existing chemicals have to be registered), clarity on their regulatory acceptance as complete replacements is urgently required. 2016 FRAME.

  9. Environmental Performance of North American Wood Panel Manufacturing

    Science.gov (United States)

    R. Bergman; D. Kaestner; A. Taylor

    2015-01-01

    Manufacturing building products such as wood panels has environmental impacts, including contributions to climate change. This paper is a compilation of four studies quantifying these impacts using the life-cycle assessment (LCA) method on five wood-based panel products made in North America during 2012. LCA is an internationally accepted and standardized method for...

  10. DOE methods for evaluating environmental and waste management samples

    Energy Technology Data Exchange (ETDEWEB)

    Goheen, S.C.; McCulloch, M.; Thomas, B.L.; Riley, R.G.; Sklarew, D.S.; Mong, G.M.; Fadeff, S.K. [eds.

    1994-10-01

    DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) is a resource intended to support sampling and analytical activities for the evaluation of environmental and waste management samples from U.S. Department of Energy (DOE) sites. DOE Methods is the result of extensive cooperation from all DOE analytical laboratories. All of these laboratories have contributed key information and provided technical reviews as well as significant moral support leading to the success of this document. DOE Methods is designed to encompass methods for collecting representative samples and for determining the radioisotope activity and organic and inorganic composition of a sample. These determinations will aid in defining the type and breadth of contamination and thus determine the extent of environmental restoration or waste management actions needed, as defined by the DOE, the U.S. Environmental Protection Agency, or others. The development of DOE Methods is supported by the Analytical Services Division of DOE. Unique methods or methods consolidated from similar procedures in the DOE Procedures Database are selected for potential inclusion in this document. Initial selection is based largely on DOE needs and procedure applicability and completeness. Methods appearing in this document are one of two types, {open_quotes}Draft{close_quotes} or {open_quotes}Verified{close_quotes}. {open_quotes}Draft{close_quotes} methods that have been reviewed internally and show potential for eventual verification are included in this document, but they have not been reviewed externally, and their precision and bias may not be known. {open_quotes}Verified{close_quotes} methods in DOE Methods have been reviewed by volunteers from various DOE sites and private corporations. These methods have delineated measures of precision and accuracy.

  11. DOE methods for evaluating environmental and waste management samples

    International Nuclear Information System (INIS)

    Goheen, S.C.; McCulloch, M.; Thomas, B.L.; Riley, R.G.; Sklarew, D.S.; Mong, G.M.; Fadeff, S.K.

    1994-10-01

    DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) is a resource intended to support sampling and analytical activities for the evaluation of environmental and waste management samples from U.S. Department of Energy (DOE) sites. DOE Methods is the result of extensive cooperation from all DOE analytical laboratories. All of these laboratories have contributed key information and provided technical reviews as well as significant moral support leading to the success of this document. DOE Methods is designed to encompass methods for collecting representative samples and for determining the radioisotope activity and organic and inorganic composition of a sample. These determinations will aid in defining the type and breadth of contamination and thus determine the extent of environmental restoration or waste management actions needed, as defined by the DOE, the U.S. Environmental Protection Agency, or others. The development of DOE Methods is supported by the Analytical Services Division of DOE. Unique methods or methods consolidated from similar procedures in the DOE Procedures Database are selected for potential inclusion in this document. Initial selection is based largely on DOE needs and procedure applicability and completeness. Methods appearing in this document are one of two types, open-quotes Draftclose quotes or open-quotes Verifiedclose quotes. open-quotes Draftclose quotes methods that have been reviewed internally and show potential for eventual verification are included in this document, but they have not been reviewed externally, and their precision and bias may not be known. open-quotes Verifiedclose quotes methods in DOE Methods have been reviewed by volunteers from various DOE sites and private corporations. These methods have delineated measures of precision and accuracy

  12. Photogrammetric methods in surveying environmental state and changes

    Energy Technology Data Exchange (ETDEWEB)

    Sitek, Z.

    1980-01-01

    Various types of maps prepared by means of photogrammetry are reviewed. So-called orthophotomaps, showing air, land or water pollution and their sources on the background of ground, vegetation and various surface objects are characterized. Methods of interpreting orthophotomaps showing environmental effects of mining coal, coal combustion and other pollution sources are reviewed. Role of statistical data in evaluation of pollution and the general environmental impact of mines or power stations are discussed. A comprehensive system of describing the condition of the natural environment, observed environmental changes, and forecasting environmental effects of coal mining, combustion and other pollution sources is described. It is called environmental monitoring. Role of photogrammetry in environmental monitoring is stressed: air photography, satellite data, and infrared photography of vegetation. (7 refs.) (In Polish)

  13. Development of environmental risk assessment framework using index method

    International Nuclear Information System (INIS)

    Ali, M.W.; Wu, Y.

    2000-01-01

    This paper presents a newly developed framework for assessing the risk from events which are considered to be major accidents to the environment according to the classifications by the United Kingdom Department of Environment (DoE). The application of an environmental risk assessment framework using the newly developed index method is demonstrated by means of a case study. The framework makes use of Environmental Hazard Index (EHI) method by the United Kingdom AEA Technology for releases to river, but improves it by taking account to toxic dose rather than concentration; taking account of long-term effects including persistence and bio accumulation, not just short term effects; extending the method to all aspects of environment, not just rivers; and allowing account to be taken of design changes to mitigate the risk. The development of the framework has also led to a revision of the tolerability criteria to be used with the framework proposed earlier by weakness and recommend further work to improve this newly proposed environmental risk assessment framework. From the study, it is recommended that the environmental risk assessment framework be applied to a wide range of other case studies in order to further improve it. The framework should be modified to maintain consistency when the DoE revises its definitions of major accidents to the environment. Ease-of-use of the framework (and any other environmental framework) would be aided by the compilation of databases for environmental toxicity, river data and available consequence models. Further work could also be done to suggest methods of mitigating the risk and including them as numerical factors within method. (author)

  14. DOE methods for evaluating environmental and waste management samples

    International Nuclear Information System (INIS)

    Goheen, S.C.; McCulloch, M.; Thomas, B.L.; Riley, R.G.; Sklarew, D.S.; Mong, G.M.; Fadeff, S.K.

    1994-04-01

    DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) is a resource intended to support sampling and analytical activities for the evaluation of environmental and waste management samples from U.S. Department of Energy (DOE) sites. DOE Methods is the result of extensive cooperation from all DOE analytical laboratories. All of these laboratories have contributed key information and provided technical reviews as well as significant moral support leading to the success of this document. DOE Methods is designed to encompass methods for collecting representative samples and for determining the radioisotope activity and organic and inorganic composition of a sample. These determinations will aid in defining the type and breadth of contamination and thus determine the extent of environmental restoration or waste management actions needed, as defined by the DOE, the U.S. Environmental Protection Agency, or others. The development of DOE Methods is supported by the Laboratory Management Division of the DOE. Methods are prepared for entry into DOE Methods as chapter editors, together with DOE and other participants in this program, identify analytical and sampling method needs. Unique methods or methods consolidated from similar procedures in the DOE Procedures Database are selected for potential inclusion in this document. Initial selection is based largely on DOE needs and procedure applicability and completeness. Methods appearing in this document are one of two types. open-quotes Draftclose quotes or open-quotes Verified.close quotes. open-quotes Draftclose quotes methods that have been reviewed internally and show potential for eventual verification are included in this document, but they have not been reviewed externally, and their precision and bias may not be known. open-quotes Verifiedclose quotes methods in DOE Methods have been reviewed by volunteers from various DOE sites and private corporations

  15. Quantitative risk assessment for environmental and occupational health. The practical solution

    International Nuclear Information System (INIS)

    Hallenbeck, W.H.; Cunningham, K.M.

    1986-01-01

    These following topics are covered in this book: concepts, methods, and limitations; exposure characterization; qualitative evaluation of human and animal studies; quantitative evaluation of human and animal studies; risk analysis; acceptable concentrations; environmental and occupational exposure to a hypothetical toxicant; and environmental exposure to a natural toxicant radon-222 and its daughters

  16. Teacher Candidates' Perception Level of Environmental Pollutant and Their Risk Factors

    Science.gov (United States)

    Oztas, Fulya; Kalipci, Erkan

    2009-01-01

    It is generally accepted that the environmental education deals with a wide range of environmental experiences, methods and processes. Teaching the subject of the environment should not be considered as an easy task. It should not only cover pure ecology education; but also include the citizenship responsibilities and the problems that are sourced…

  17. A method of environmental management for landfill evaluation

    International Nuclear Information System (INIS)

    Zapata Munoz, Andres Felipe; Zapata Sanchez, Carmen Elena

    2013-01-01

    From the description of the activities of the operation of the landfill and environmental farm Los Saltos and the physicochemical characterization of its leachate, a method of environmental assessment was proposed. It includes an analysis of interactions as a diagnostic tool for the development of a cause-effect matrix to identify the impacts on associated environmental components. With this information, it was developed a matrix of importance where impacts were classified as critical, severe, moderate and irrelevant. A qualitative assessment of environmental impact was then carried out to help identify the most impacting activities as well as the most affected parameters. As a result of this method, it was determined that the operation of a landfill has a greater impact on the physical and biotic components of the environment, producing effects such as impaired air quality, loss of aquatic species and terrestrial flora, alteration of the hydrological cycle, and deterioration of surface and groundwater quality.

  18. Anticipating Potential Waste Acceptance Criteria for Defense Spent Nuclear Fuel

    International Nuclear Information System (INIS)

    Rechard, R.P.; Lord, M.E.; Stockman, C.T.; McCurley, R.D.

    1997-01-01

    The Office of Environmental Management of the U.S. Department of Energy is responsible for the safe management and disposal of DOE owned defense spent nuclear fuel and high level waste (DSNF/DHLW). A desirable option, direct disposal of the waste in the potential repository at Yucca Mountain, depends on the final waste acceptance criteria, which will be set by DOE's Office of Civilian Radioactive Waste Management (OCRWM). However, evolving regulations make it difficult to determine what the final acceptance criteria will be. A method of anticipating waste acceptance criteria is to gain an understanding of the DOE owned waste types and their behavior in a disposal system through a performance assessment and contrast such behavior with characteristics of commercial spent fuel. Preliminary results from such an analysis indicate that releases of 99Tc and 237Np from commercial spent fuel exceed those of the DSNF/DHLW; thus, if commercial spent fuel can meet the waste acceptance criteria, then DSNF can also meet the criteria. In large part, these results are caused by the small percentage of total activity of the DSNF in the repository (1.5%) and regulatory mass (4%), and also because commercial fuel cladding was assumed to provide no protection

  19. Environmental Restoration Disposal Facility waste acceptance criteria. Revision 1

    International Nuclear Information System (INIS)

    Corriveau, C.E.

    1996-01-01

    The Environmental Restoration Disposal Facility (ERDF) is designed to be an isolation structure for low-level radioactive remediation waste, chemically contaminated remediation waste, and remediation waste that contains both chemical and radioactive constituents (i.e., mixed remediation waste) produced during environmental remediation of Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) past-practice units at the Hanford Site. Remedial action wastes, which will become a structural component of the ERDF, include bulk soil, demolition debris, and miscellaneous wastes from burial grounds. These wastes may originate from CERCLA past-practice sites (i.e., operable units) in the 100 Areas, the 200 Areas, and the 300 Area of the Hanford Site

  20. US EPA - A*Star Partnership - Accelerating the Acceptance of ...

    Science.gov (United States)

    The path for incorporating new alternative methods and technologies into quantitative chemical risk assessment poses a diverse set of scientific challenges. Some of these challenges include development of relevant and predictive test systems and computational models to integrate and extrapolate experimental data, and rapid characterization and acceptance of these systems and models. The series of presentations will highlight a collaborative effort between the U.S. Environmental Protection Agency (EPA) and the Agency for Science, Technology and Research (A*STAR) that is focused on developing and applying experimental and computational models for predicting chemical-induced liver and kidney toxicity, brain angiogenesis, and blood-brain-barrier formation. In addressing some of these challenges, the U.S. EPA and A*STAR collaboration will provide a glimpse of what chemical risk assessments could look like in the 21st century. Presentation on US EPA – A*STAR Partnership at international symposium on Accelerating the acceptance of next-generation sciences and their application to regulatory risk assessment in Singapore.

  1. The environmental benefits of wind energy

    International Nuclear Information System (INIS)

    Sips, H.W.

    1990-01-01

    Three more or less reliable methods to determine the financial acceptance of the external effects of the use of wind energy are discussed. Attention is paid to the appreciation of external effects based on the environmental pollution or damage, appreciation based on prevented costs (implied valuation), and appreciation based on surveys, by which the willingness of the civilians to pay for a clean environment can be determined. A first indication of the environmental benefits of wind energy based on the above-mentioned methods is 0.04 to 0.08 DFl per kWh. For the total service life of a wind turbine this amounts to 800-1600 DFl per kW. The environmental benefits can be re-calculated in the form of subsidies, increasing the sellback prices or by means of an environmental levy on electric power generated by conventional power plants. 2 figs., 1 tab., 12 refs

  2. Brent Spar abandonment - Best Practicable Environmental Option (BPEO) assessment

    International Nuclear Information System (INIS)

    1994-12-01

    Possible methods of abandoning or re-using the Brent Spar storage and tanker offloading facility following its decommissioning in 1991 are discussed. The report assesses six of the thirteen possible methods, including horizontal dismantling and onshore disposal, vertical dismantling and onshore disposal, in-field disposal, deep water disposal, refurbishment and re-use, and continued maintenance, in order to determine the Best Practicable Environmental Option (BPEO). The BPEO covers technical feasibility risks to health and safety of the work force, environmental impacts, public acceptability and costs. (UK)

  3. When is a threat only an acceptable risk

    International Nuclear Information System (INIS)

    White, D.

    1983-01-01

    The government has accepted the report 'Lead in the Environment' by the Royal Commission on Environmental Pollution which recommends the introduction of lead-free petrol. This acceptance is discussed in the context of how changes in policy on pollution legislation come about. It seems that broad changes in social attitudes are needed. Most changes start as environmental scares some of which capture public imagination, others do not. Scientists are a major influence on scares - some are ignored, others, where the risks may be less, are overplayed. Scares tend to follow a predictable pattern. The economic and social histories of some changes are presented - clean air, blue asbestos, the use of aerosols, fluoride in water, nuclear power, acid rain and VDU radiation. It is suggested that some scares are more a cry for help. Whether people are for or against technological development depends not on the risk they accept but on the different meanings of hazards they understand. To opponents of nuclear power, radiation is a metaphor for the whole insensitive, selfish, destructive industrial system. (U.K.)

  4. Environmental friendly energy transport media

    International Nuclear Information System (INIS)

    Wan Nik, W.B.

    2002-01-01

    Rational self-interest and good environmental citizenship are forcing the development of renewable and environmentally, acceptable working fluids. Fluids that are at least equivalent in performance plus biodegradable have been formulated in Europe and USA rising vegetable oils as base stocks and as innovative additive packages. While much of the research has been made in the field of alternative environmentally, friendly energy, transport media, the thermal stability of vegetable based stock is still a challenging area. This work concentrates more in improving the oxidation stability of the vegetable based stocks. Oven and oil bath test methods were employed in this study. This paper tabled mineral and vegetable oil physical test results and presents thermal stability of oil blends. (Author)

  5. Disintegration of sublingual tablets: proposal for a validated test method and acceptance criterion.

    Science.gov (United States)

    Weda, M; van Riet-Nales, D A; van Aalst, P; de Kaste, D; Lekkerkerker, J F F

    2006-12-01

    In the Netherlands the market share of isosorbide dinitrate 5 mg sublingual tablets is dominated by 2 products (A and B). In the last few years complaints have been received from health care professionals on product B. During patient use the disintegration of the tablet was reported to be slow and/or incomplete, and ineffectiveness was experienced. In the European Pharmacopoeia (Ph. Eur.) no requirement is present for the disintegration time of sublingual tablets. The purpose of this study was to compare the in vitro disintegration time of products A and B, and to establish a suitable test method and acceptance criterion. A and B were tested with the Ph. Eur. method described in the monograph on disintegration of tablets and capsules as well as with 3 modified tests using the same Ph. Eur. apparatus, but without movement of the basket-rack assembly. In modified test 1 and modified test 2 water was used as medium (900 ml and 50 ml respectively), whereas in modified test 3 artificial saliva was used (50 ml). In addition, disintegration was tested in Nessler tubes with 0.5 and 2 ml of water. Finally, the Ph. Eur. method was also applied to other sublingual tablets with other drug substances on the Dutch market. With modified test 3 no disintegration could be achieved within 20 min. With the Ph. Eur. method and modified tests 1 and 2 product A and B differed significantly (p disintegration times. These 3 methods were capable of discriminating between products and between batches. The time measured with the Ph. Eur. method was significantly lower compared to modified tests 1 and 2 (p tablets the disintegration time should be tested. The Ph. Eur. method is considered suitable for this test. In view of the products currently on the market and taking into consideration requirements in the United States Pharmacopeia and Japanese Pharmacopoeia, an acceptance criterion of not more than 2 min is proposed.

  6. Test results for cables used in nuclear power plants by a new environmental testing method

    Energy Technology Data Exchange (ETDEWEB)

    Handa, Katsue; Fujimura, Shun-ichi; Hayashi, Toshiyasu; Takano, Keiji; Oya, Shingo

    1982-12-01

    In the nuclear power plants using PWRs or BWRs in Japan, environmental tests are provided, in which simulated LOCA conditions are considered so as to conform with Japanese conditions, and many cables which passed these tests are presently employed. Lately, the new environmental testing, in which a credible accident called MSLB (main steam line breakage) is taken into account, is investigated in PWR nuclear power plants, besides LOCA. This paper reports on the results of evaluating some PWR cables for this new environmental testing conditions. The several cables tested were selected out of PH cables (fire-retardant, ethylene propylene rubber insulated, chlorosulfonated polyethylene sheathed cables) as the cables for safety protecting circuits and to be used in containment vessels where the cables are to be exposed to severe environmental test conditions of 2 x 10/sup 8/ Rad ..gamma..-irradiation and simulated LOCA. All these cables have been accepted after the vertical tray burning test provided in the IEEE Standard 383. The new testing was carried out by sequentially applying thermal deterioration, ..gamma..-irradiation, and the exposure to steam (twice 300 s exposures to 190 deg C superheated steam). After completing each step, tensile strength, elongation, insulation resistance and breakdown voltage were measured, respectively. Every cable tested showed satisfactory breakdown voltage after the exposure to steam, thus it was decided to be acceptable. In future, it is required to investigate the influence of the rate of temperature rise on the cable to be tested in MSLB simulation.

  7. Can hydroreservoirs in tropical moist forest be made environmentally acceptable?

    International Nuclear Information System (INIS)

    Goodland, R.; Juras, A.; Pachauri, R.; International Power Engineering Society)

    1992-01-01

    Today's polarization of society for and against big hydroprojects relates to environmental costs, particularly borne by vulnerable ethnic minorities and the poor; such costs include species extinctions and tropical deforestation. This counterproductive polarization can be reconciled by transparency of planning, pluralism involving the society and especially all affected people, and by engendering national consensus on the best project. Detailed criteria for consensus are discussed. These include promotion of energy efficiency and convservation, ranking of alternatives to the next hydroproject, and environmental ranking of potential sites. Environmentally well designed hydro can be preferable to alternatives (coal, nuclear), and most environmental costs can be prevented, thus making hydro renewable and sustainable. (author)

  8. Comparing the Costs and Acceptability of Three Fidelity Assessment Methods for Assertive Community Treatment.

    Science.gov (United States)

    Rollins, Angela L; Kukla, Marina; Salyers, Michelle P; McGrew, John H; Flanagan, Mindy E; Leslie, Doug L; Hunt, Marcia G; McGuire, Alan B

    2017-09-01

    Successful implementation of evidence-based practices requires valid, yet practical fidelity monitoring. This study compared the costs and acceptability of three fidelity assessment methods: on-site, phone, and expert-scored self-report. Thirty-two randomly selected VA mental health intensive case management teams completed all fidelity assessments using a standardized scale and provided feedback on each. Personnel and travel costs across the three methods were compared for statistical differences. Both phone and expert-scored self-report methods demonstrated significantly lower costs than on-site assessments, even when excluding travel costs. However, participants preferred on-site assessments. Remote fidelity assessments hold promise in monitoring large scale program fidelity with limited resources.

  9. Environmental acceptability of high-performance alternatives for depleted uranium penetrators

    Energy Technology Data Exchange (ETDEWEB)

    Kerley, C.R.; Easterly, C.E.; Eckerman, K.F. [and others

    1996-08-01

    The Army`s environmental strategy for investigating material substitution and management is to measure system environmental gains/losses in all phases of the material management life cycle from cradle to grave. This study is the first in a series of new investigations, applying material life cycle concepts, to evaluate whether there are environmental benefits from increasing the use of tungsten as an alternative to depleted uranium (DU) in Kinetic Energy Penetrators (KEPs). Current military armor penetrators use DU and tungsten as base materials. Although DU alloys have provided the highest performance of any high-density alloy deployed against enemy heavy armor, its low-level radioactivity poses a number of environmental risks. These risks include exposures to the military and civilian population from inhalation, ingestion, and injection of particles. Depleted uranium is well known to be chemically toxic (kidney toxicity), and workplace exposure levels are based on its renal toxicity. Waste materials containing DU fragments are classified as low-level radioactive waste and are regulated by the Nuclear Regulatory Commission. These characteristics of DU do not preclude its use in KEPs. However, long-term management challenges associated with KEP deployment and improved public perceptions about environmental risks from military activities might be well served by a serious effort to identify, develop, and substitute alternative materials that meet performance objectives and involve fewer environmental risks. Tungsten, a leading candidate base material for KEPS, is potentially such a material because it is not radioactive. Tungsten is less well studied, however, with respect to health impacts and other environmental risks. The present study is designed to contribute to the understanding of the environmental behavior of tungsten by synthesizing available information that is relevant to its potential use as a penetrator.

  10. Consumer acceptance and appropriateness of meat substitutes in a meal context

    NARCIS (Netherlands)

    Elzerman, J.E.; Hoek, A.C.; Boekel, van M.A.J.S.; Luning, P.A.

    2011-01-01

    The replacement of meat by meat substitutes could help to reduce the environmental burden of our food production systems. However, the acceptance of most meat substitutes is still low. This study investigated the role of meal context on the acceptance of meat substitutes. In a central location test

  11. Social acceptance of solar energy technologies in China-End users' perspective

    International Nuclear Information System (INIS)

    Yuan Xueliang; Zuo Jian; Ma Chunyuan

    2011-01-01

    Energy is essential to human beings. The increasing demand of energy has triggered the public scrutiny on the sustainability issues associated with the energy production and transmission. There have been a large number of studies focusing on reducing the environmental impacts associated with the energy sector. Renewable energy sources such as solar energy have been prompted to mitigate these environmental impacts. This research adopted a quantitative approach to investigate the social acceptance of solar energy technologies from end users' perspective in Shandong province, China. A large scale questionnaire survey was conducted. The results show that there is a considerable high level of social acceptance and public awareness of solar water heater. However, another major application of solar energy, solar PV has not gained a high level of social acceptance or public awareness in Shandong. This study provides useful references for policy makers to further promote the utilization of solar energy innovations. - Research Highlights: → Social acceptance of solar energy technologies from end users' perspective is investigated by a large scale questionnaire survey. → Higher level of social acceptance and public awareness of solar water heater than solar PV. → Impact factors for social acceptance of solar energy technologies are analyzed.

  12. Acceptability and Feasibility of a Shared Decision-Making Model in Work Rehabilitation: A Mixed-Methods Study of Stakeholders' Perspectives.

    Science.gov (United States)

    Coutu, Marie-France; Légaré, France; Durand, Marie-José; Stacey, Dawn; Labrecque, Marie-Elise; Corbière, Marc; Bainbridge, Lesley

    2018-04-16

    Purpose To establish the acceptability and feasibility of implementing a shared decision-making (SDM) model in work rehabilitation. Methods We used a sequential mixed-methods design with diverse stakeholder groups (representatives of private and public employers, insurers, and unions, as well as workers having participated in a work rehabilitation program). First, a survey using a self-administered questionnaire enabled stakeholders to rate their level of agreement with the model's acceptability and feasibility and propose modifications, if necessary. Second, eight focus groups representing key stakeholders (n = 34) and four one-on-one interviews with workers were conducted, based on the questionnaire results. For each stakeholder group, we computed the percentage of agreement with the model's acceptability and feasibility and performed thematic analyses of the transcripts. Results Less than 50% of each stakeholder group initially agreed with the overall acceptability and feasibility of the model. Stakeholders proposed 37 modifications to the objectives, 17 to the activities, and 39 to improve the model's feasibility. Based on in-depth analysis of the transcripts, indicators were added to one objective, an interview guide was added as proposed by insurers to ensure compliance of the SDM process with insurance contract requirements, and one objective was reformulated. Conclusion Despite initially low agreement with the model's acceptability on the survey, subsequent discussions led to three minor changes and contributed to the model's ultimate acceptability and feasibility. Later steps will involve assessing the extent of implementation of the model in real rehabilitation settings to see if other modifications are necessary before assessing its impact.

  13. Client preferences and acceptability for medical abortion and MVA as early pregnancy termination method in Northwest Ethiopia

    Directory of Open Access Journals (Sweden)

    White Mary T

    2011-06-01

    Full Text Available Abstract Background Increasing access to safe abortion services is the most effective way of preventing the burden of unsafe abortion, which is achieved by increasing safe choices for pregnancy termination. Medical abortion for termination of early abortion is said to safe, effective, and acceptable to women in several countries. In Ethiopia, however, medical methods have, until recently, never been used. For this reason it is important to assess women's preferences and the acceptability of medical abortion and manual vacuum aspiration (MVA in the early first trimester pregnancy termination and factors affecting acceptability of medical and MVA abortion services. Methods A prospective study was conducted in two hospitals and two clinics from March 2009 to November 2009. The study population consisted of 414 subjects over the age of 18 with intrauterine pregnancies of up to 63 days' estimated gestation. Of these 251 subjects received mifepristone and misoprostol and 159 subjects received MVA. Questionnaires regarding expectations and experiences were administered before the abortion and at the 2-week follow-up visit. Results The study groups were similar with respect to age, marital status, educational status, religion and ethnicity. Their mean age was about 23, majority in both group completed secondary education and about half were married. Place of residence and duration of pregnancy were associated with method choice. Subjects undergoing medical abortions reported significantly greater satisfaction than those undergoing surgical abortions (91.2% vs 82.4%; P Conclusions Women receiving medical abortion were more satisfied with their method and more likely to choose the same method again than were subjects undergoing surgical abortion. We conclude that medical abortion can be used widely as an alternative method for early pregnancy termination.

  14. Statistical Methods for Environmental Pollution Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Gilbert, Richard O. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    1987-01-01

    The application of statistics to environmental pollution monitoring studies requires a knowledge of statistical analysis methods particularly well suited to pollution data. This book fills that need by providing sampling plans, statistical tests, parameter estimation procedure techniques, and references to pertinent publications. Most of the statistical techniques are relatively simple, and examples, exercises, and case studies are provided to illustrate procedures. The book is logically divided into three parts. Chapters 1, 2, and 3 are introductory chapters. Chapters 4 through 10 discuss field sampling designs and Chapters 11 through 18 deal with a broad range of statistical analysis procedures. Some statistical techniques given here are not commonly seen in statistics book. For example, see methods for handling correlated data (Sections 4.5 and 11.12), for detecting hot spots (Chapter 10), and for estimating a confidence interval for the mean of a lognormal distribution (Section 13.2). Also, Appendix B lists a computer code that estimates and tests for trends over time at one or more monitoring stations using nonparametric methods (Chapters 16 and 17). Unfortunately, some important topics could not be included because of their complexity and the need to limit the length of the book. For example, only brief mention could be made of time series analysis using Box-Jenkins methods and of kriging techniques for estimating spatial and spatial-time patterns of pollution, although multiple references on these topics are provided. Also, no discussion of methods for assessing risks from environmental pollution could be included.

  15. Consumer acceptance of cultured meat: A systematic review.

    Science.gov (United States)

    Bryant, Christopher; Barnett, Julie

    2018-09-01

    Cultured meat grown in-vitro from animal cells is being developed as a way of addressing many of the ethical and environmental concerns associated with conventional meat production. As commercialisation of this technology appears increasingly feasible, there is growing interest in the research on consumer acceptance of cultured meat. We present a systematic review of the peer-reviewed literature, and synthesize and analyse the findings of 14 empirical studies. We highlight demographic variations in consumer acceptance, factors influencing acceptance, common consumer objections, perceived benefits, and areas of uncertainty. We conclude by evaluating the most important objections and benefits to consumers, as well as highlighting areas for future research. Copyright © 2018 Elsevier Ltd. All rights reserved.

  16. Application of improved topsis method to comprehensive assessment of radiological environmental quality

    International Nuclear Information System (INIS)

    Shi Dongsheng; Di Yuming; Zhou Chunlin

    2007-01-01

    TOPSIS is a method for multiobjective decision-making, which can be applied to comprehensive assessment of radiological environmental quality. This paper introduces the principle of TOPSIS method and sets up the model of improved TOPSIS method, discusses the application of improved TOPSIS method to comprehensive assessment of radiological environmental quality. This method sufficiently makes use of the information of the optimal matrix. Analysis of practical examples using MATLAB program shows that it is objectively reasonable and feasible to comprehensively assess radiological environmental quality by improved TOPSIS method. This paper also provides the result of optimum number of sites and compares it with optimal index method based on TOPSIS method and traditional method. (authors)

  17. Test results for cables used in nuclear power plants by a new environmental testing method

    International Nuclear Information System (INIS)

    Handa, Katsue; Fujimura, Shun-ichi; Hayashi, Toshiyasu; Takano, Keiji; Oya, Shingo

    1982-01-01

    In the nuclear power plants using PWRs or BWRs in Japan, environmental tests are provided, in which simulated LOCA conditions are considered so as to conform with Japanese conditions, and many cables which passed these tests are presently employed. Lately, the new environmental testing, in which a credible accident called MSLB (main steam line breakage) is taken into account, is investigated in PWR nuclear power plants, besides LOCA. This paper reports on the results of evaluating some PWR cables for this new environmental testing conditions. The several cables tested were selected out of PH cables (fire-retardant, ethylene propylene rubber insulated, chlorosulfonated polyethylene sheathed cables) as the cables for safety protecting circuits and to be used in containment vessels where the cables are to be exposed to severe environmental test conditions of 2 x 10 8 Rad γ-irradiation and simulated LOCA. All these cables have been accepted after the vertical tray burning test provided in the IEEE Standard 383. The new testing was carried out by sequentially applying thermal deterioration, γ-irradiation, and the exposure to steam (twice 300 s exposures to 190 deg C superheated steam). After completing each step, tensile strength, elongation, insulation resistance and breakdown voltage were measured, respectively. Every cable tested showed satisfactory breakdown voltage after the exposure to steam, thus it was decided to be acceptable. In future, it is required to investigate the influence of the rate of temperature rise on the cable to be tested in MSLB simulation. (Wakatsuki, Y.)

  18. Interlaboratory Validation of the Leaching Environmental Assessment Framework (LEAF) Method 1313 and Method 1316

    Science.gov (United States)

    This document summarizes the results of an interlaboratory study conducted to generate precision estimates for two parallel batch leaching methods which are part of the Leaching Environmental Assessment Framework (LEAF). These methods are: (1) Method 1313: Liquid-Solid Partition...

  19. RISK ANALYSES USED IN ACCEPTANCE TESTING

    Directory of Open Access Journals (Sweden)

    Oxana STOROJ

    2016-06-01

    Full Text Available This article is talking about risk based testing approach in user acceptance testing UAT (User Acceptance Testing. There are presented definitions of risk and risk based testing. In addition, we are talking about risks that can appear during UAT and we are describing the process of testing based on risks. We propose some techniques and methods of identifying risks such as using Brainstorming, Delphi method,probability analysis method and others. Also, risk traceability matrix is presented as a method of prioritizing risks.

  20. Comparison of Saliva Collection Methods in Children with High-Functioning Autism Spectrum Disorders: Acceptability and Recovery of Cortisol

    Science.gov (United States)

    Putnam, Susan K.; Lopata, Christopher; Fox, Jeffery D.; Thomeer, Marcus L.; Rodgers, Jonathan D.; Volker, Martin A.; Lee, Gloria K.; Neilans, Erik G.; Werth, Jilynn

    2012-01-01

    This study compared cortisol concentrations yielded using three saliva collection methods (passive drool, salivette, and sorbette) in both in vitro and in vivo conditions, as well as method acceptability for a sample of children (n = 39) with High Functioning Autism Spectrum Disorders. No cortisol concentration differences were observed between…

  1. Probabilistic Requirements (Partial) Verification Methods Best Practices Improvement. Variables Acceptance Sampling Calculators: Derivations and Verification of Plans. Volume 1

    Science.gov (United States)

    Johnson, Kenneth L.; White, K, Preston, Jr.

    2012-01-01

    The NASA Engineering and Safety Center was requested to improve on the Best Practices document produced for the NESC assessment, Verification of Probabilistic Requirements for the Constellation Program, by giving a recommended procedure for using acceptance sampling by variables techniques. This recommended procedure would be used as an alternative to the potentially resource-intensive acceptance sampling by attributes method given in the document. This document contains the outcome of the assessment.

  2. Tools and methods for environmental decision-making in energy production companies

    International Nuclear Information System (INIS)

    Tulenheimo, V.; Thun, R.; Backman, M.

    1996-01-01

    This report concentrates on the models and methods used for internal environmental decision-making by company management. The amount of available models aiming at this purpose is numerous. The methods differ from each other for example in their comprehensiveness, in the types of effects included, in the degree of quantification, and in the method used for weighting of environmental impacts. Different types of models and methods give the results of the valuation in qualitative, in non-monetary, or even in monetary units. Traditional financial analysis is, however, still used to compare different investment options. First-hand experiences of model applications show that a lot of work is still needed before the new integrated methodologies can be incorporated into existing decision-making systems in standardized forms. Developers of methodologies and software systems for environmental costing will benefit from co-operation and from inputs by cross-functional teams of the company. The future will show if it is possible to combine the best features of useful methods and find a solution which is leading to facilitated company environmental decision-making which is undisputed and reliable

  3. Betweenness-Based Method to Identify Critical Transmission Sectors for Supply Chain Environmental Pressure Mitigation.

    Science.gov (United States)

    Liang, Sai; Qu, Shen; Xu, Ming

    2016-02-02

    To develop industry-specific policies for mitigating environmental pressures, previous studies primarily focus on identifying sectors that directly generate large amounts of environmental pressures (a.k.a. production-based method) or indirectly drive large amounts of environmental pressures through supply chains (e.g., consumption-based method). In addition to those sectors as important environmental pressure producers or drivers, there exist sectors that are also important to environmental pressure mitigation as transmission centers. Economy-wide environmental pressure mitigation might be achieved by improving production efficiency of these key transmission sectors, that is, using less upstream inputs to produce unitary output. We develop a betweenness-based method to measure the importance of transmission sectors, borrowing the betweenness concept from network analysis. We quantify the betweenness of sectors by examining supply chain paths extracted from structural path analysis that pass through a particular sector. We take China as an example and find that those critical transmission sectors identified by betweenness-based method are not always identifiable by existing methods. This indicates that betweenness-based method can provide additional insights that cannot be obtained with existing methods on the roles individual sectors play in generating economy-wide environmental pressures. Betweenness-based method proposed here can therefore complement existing methods for guiding sector-level environmental pressure mitigation strategies.

  4. Impact of Environmental Auditing on Environmental Pollution ...

    African Journals Online (AJOL)

    PROF HORSFALL

    and sustainable development, environmental pollution and healthy environment. To achieve the desired sustainable ... Dates: Received: 12February 2018; Revised: 08 April: 2018; Accepted: 16 April 2018 ..... Commerce (ICC), Paris. Lynn, R ...

  5. Environmental risk of oil spills in Northern Areas[Pollution abatement in Norway

    Energy Technology Data Exchange (ETDEWEB)

    Hoell, Espen

    2006-07-01

    The presentation discusses consequences and risks for the environment of oil spills and other pollution factors in the northern areas particularly in the north of Norway and the Barents Sea. Various environmental risk analysis are also discussed. The main conclusions are: Environmental risk for Obelix: The environmental risk is very low. The environmental risk for Obelix is less than 21% of Hydro's acceptance criteria for minor damage. The environmental risk is acceptable. DNV: The contingency planned for Obelix (barrier 1 and 2) will reduce the environmental risk further by approx. 60%, date: 2006-01-13. Question: Hydro Oil and Energy. Does the oil industry reach other conclusions than the national research institutes does for the Management Plan of the Barents Sea. The underlying studies (of the management plan) mainly consider the consequences of worst case events. Full rate (3000 m3/d), long duration (60 days). Blowout occurring at the worst time and place. They assume that consequences experienced by shipwreck accidents in the coastal zone are relevant also for offshore discharges. They do not consider: The probability for the worst case blowout to occur. The probability for the worst case consequences to be realized. The probability for less serious impact. The probable impact distribution. Overall conclusion: Environmental Risk of oil and gas activities in Lofoten and the Barents Sea Based on: 1) 40 years of experience in the Norwegian sector. 2) World leading risk reduction technology. 3) Systematic and thorough methods for analysis of environmental risk. 4) Several environmental risk analyses for Barents Sea and Lofoten drilling operations, indicating acceptable risk levels. 5) Recent ERA for Goliath drilling indicating similar low risk levels. 6) Well functioning contingency systems. We conclude that the environmental risk of oil and gas activities in the northern areas is low and acceptable to the Norwegian society. The environmental risk due to oil

  6. Ecological Tax Reform in Denmark: history and social acceptability

    International Nuclear Information System (INIS)

    Klok, Jacob; Larsen, Anders; Hansen, Kirsten; Dahl, Anja

    2006-01-01

    Despite the long-term and positive experience with Ecological Tax Reform (ETR), the PETRAS study indicates that awareness about the principles behind ETR is low among both businesses and the general public in Denmark. As well as the lack of awareness of ETR, attitudes towards environmental taxation appear negative. When explaining the political intentions behind ETR, attitudes seem to improve somewhat, but they still remain overall sceptical. Based on the history and the results of the PETRAS project the article will describe some of the main impediments for further development of environmental tax and ETR policies in Denmark. The article concludes that the main reason why the ETR policy has been met with such apparently low social acceptability in Denmark is that the 'green' of the 'green' tax reform has been somewhat oversold. On this basis it recommends the pursuit of a courageous government strategy of, openly and repeatedly, stressing the revenue purposes of environmentally related taxes over the environmental purposes in an effort to redirect public discussions towards relevant issues like the pros and cons of environmentally related taxation compared with other types of taxation and the connection between the overall tax burden and demands for government spending. Such a bold government 'confession' to the obvious revenue purposes of the environmentally related taxes could make them, if not popular, then at least a bit more acceptable to businesses and the general public. (author)

  7. Methods and quality assurance in environmental medicine. Formation of a RKI-Commission

    International Nuclear Information System (INIS)

    Eis, D.

    2000-01-01

    An almost bewildering number of widely differing methods and techniques, often not validated, are being applied often inappropriately in the field of environmental medicine to answer questions regarding exposure assessment, diagnosis, treatment, counselling and prevention. Therefore, quality control within the field of environmental medicine is quite problematic. A primary goal of the newly formed RKI-Commission 'Methods and Quality Assurance in Environmental Medicine' is to form a panel of experts in the field, who evaluate the situation and generate consensus documents containing respective recommendations. By this the commission will contribute to standardization and agreement on appropriate methods, procedures and their correct application in the practice of environmental medicine. Hopefully it will also achieve a stronger, more consistent use of evidence-based-medicine and improve the quality of the structure, processes and results of research and practice in this field. The committee will initially deal with the issue of clinical environmental medicine, because here the largest problems in quality assurance are seen. In this context the commission will look at the problem areas of environmental-medical outpatient units and environmental clinics. The work of the commission will be supported by the newly formed Documentation and Evaluation Center for Methods in Environmental Medicine (Zentrale Erfassungs- und Bewertungsstelle fuer umweltmedizinische Methoden, ZEBUM) at the Robert Koch Institute. (orig.) [de

  8. Scholarship for Nuclear Communications and Methods for Evaluation of Nuclear Project Acceptability

    Energy Technology Data Exchange (ETDEWEB)

    Golay, Michael [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2016-10-30

    This project aims to go beyond effective communication in understanding how to design nuclear enterprise projects that will gain stakeholder acceptability. Much of what we are studying is generally applicable to controversial projects, and we expect our results to be of broad value beyond the nuclear arena. Acceptability is more than effective communication; it also requires varying degrees of engagement with a disparate number of stakeholder groups. In the nuclear enterprise, previous attempts have been well designed physically (i.e., technologically sound), but have floundered by being insensitive concerning acceptance. Though effective communication is a necessary, but insufficient, condition for such success, there is a lack of scholarship regarding how to gain stakeholder acceptance for new controversial projects, including nuclear ones. Our work is building a model for use in assessing the performance of a project in the area of acceptability. In the nuclear-social nexus, gaining acceptance requires a clear understanding of factors regarded as being important by the many stakeholders that are common to new nuclear project (many of whom hold an effective veto power). Projects tend to become socially controversial when public beliefs, expert opinion and decision-maker understanding are misaligned. As such, stakeholder acceptance is hypothesized as both an ongoing process and an initial project design parameter comprised of complex, social, cognitive and technical components. Controversial projects may be defined as aspects of modern technologies that some people question, or are cautious about. They could range from genetic modifications, biological hazards, effects of chemical agents, nuclear radiation or hydraulic fracturing operations. We intend that our work will result in a model likely to be valuable for refining project design and implementation to increase the knowledge needed for successful management of stakeholder relationships.

  9. A fuzzy inventory model with acceptable shortage using graded mean integration value method

    Science.gov (United States)

    Saranya, R.; Varadarajan, R.

    2018-04-01

    In many inventory models uncertainty is due to fuzziness and fuzziness is the closed possible approach to reality. In this paper, we proposed a fuzzy inventory model with acceptable shortage which is completely backlogged. We fuzzily the carrying cost, backorder cost and ordering cost using Triangular and Trapezoidal fuzzy numbers to obtain the fuzzy total cost. The purpose of our study is to defuzzify the total profit function by Graded Mean Integration Value Method. Further a numerical example is also given to demonstrate the developed crisp and fuzzy models.

  10. Methods of I-129 analysis for environmental monitoring

    International Nuclear Information System (INIS)

    Nomura, T.; Katagiri, H.; Kitahara, Y.; Fukuda, S.

    1980-01-01

    Among the radioiodine isotopes discharged from nuclear facilities, I-129 has the longest half-life (1.7 x 10 7 years) and thus environmental monitoring of this nuclide is important. Methods of analysis of low level I-129 in environmental samples such as milk, crops, seaweeds and soils are described. The iodine is separated from the dried or pulverized samples by ignition at 1000 0 C in a quartz combustion apparatus with a stream of oxygen. Stable I-127 is simultaneously determined and the atom ratio of 129 I/ 127 I calculated in order to evaluate the thyroid dose by the specific activity method. Results of an analysis of typical food samples collected near the fuel reprocessing plant of Tokai Works showed no I-129 concentrations higher than the detection limit of the method (10 -2 pCi for 10 g. dry sample). (UK)

  11. Waste acceptance product specifications for vitrified high-level waste forms

    International Nuclear Information System (INIS)

    Applewhite-Ramsey, A.; Sproull, J.F.

    1994-01-01

    The Department of Energy (DOE) Office of Environmental Restoration and Waste Management (EM) has developed Waste Acceptance Product Specifications (EM-WAPS). The EM-WAPS will be the basis for defining product acceptance criteria compatible with the requirements of the Civilian Radioactive Waste Management System (CRWMS). The relationship between the EM-WAPS and the CRWMS Systems Requirements document (WA-SRD) will be discussed. The impact of the EM-WAPS on the Savannah River Sit (SRS) Defense Waste Processing Facility's (DWPF) Waste Acceptance Program, Waste Qualification Run planning, and startup schedule will also be reported. 14 refs., 2 tabs

  12. Cooking time but not cooking method affects children's acceptance of Brassica vegetables

    NARCIS (Netherlands)

    Poelman, A.A.M.; Delahunty, C.M.; Graaf, de C.

    2013-01-01

    The home environment potentially presents a simple means to increase acceptance of sensory properties of vegetables by preparation. This research investigated how preparation can effectively impact upon children's acceptance for vegetables. Five- and six-year old children (n = 82, balanced for

  13. Wastes behavior and environmental impacts, researches and methods

    International Nuclear Information System (INIS)

    Labeyrie, J.; Chateau, L.; Gin, St.

    2001-01-01

    The wastes management policy takes into account more and more often the environmental impacts mastership. This evolution is particularly appreciable when the wastes directly interact with the environment: storage, utilization for roads construction and so on. In this context the ADEME organized the 8 june 2000 a colloquium to present the new evaluation methods and tools, to describe the regulations and to identify the research programs needed for this environmental policy. Eleven papers are presented. (A.L.B.)

  14. Displacement compressors - acceptance tests

    CERN Document Server

    International Organization for Standardization. Geneva

    1996-01-01

    ISO 1217:2009 specifies methods for acceptance tests regarding volume rate of flow and power requirements of displacement compressors. It also specifies methods for testing liquid-ring type compressors and the operating and testing conditions which apply when a full performance test is specified.

  15. Acceptability of impregnated school uniforms for dengue control in Thailand: a mixed methods approach.

    Science.gov (United States)

    Murray, Natasha; Jansarikij, Suphachai; Olanratmanee, Phanthip; Maskhao, Pongsri; Souares, Aurélia; Wilder-Smith, Annelies; Kittayapong, Pattamaporn; Louis, Valérie R

    2014-01-01

    As current dengue control strategies have been shown to be largely ineffective in reducing dengue in school-aged children, novel approaches towards dengue control need to be studied. Insecticide-impregnated school uniforms represent an innovative approach with the theoretical potential to reduce dengue infections in school children. This study took place in the context of a randomised control trial (RCT) to test the effectiveness of permethrin-impregnated school uniforms (ISUs) for dengue prevention in Chachoengsao Province, Thailand. The objective was to assess the acceptability of ISUs among parents, teachers, and principals of school children involved in the trial. Quantitative and qualitative tools were used in a mixed methods approach. Class-clustered randomised samples of school children enrolled in the RCT were selected and their parents completed 321 self-administered questionnaires. Descriptive statistics and logistic regression were used to analyse the quantitative data. Focus group discussions and individual semi-structured interviews were conducted with parents, teachers, and principals. Qualitative data analysis involved content analysis with coding and thematic development. The knowledge and experience of dengue was substantial. The acceptability of ISUs was high. Parents (87.3%; 95% CI 82.9-90.8) would allow their child to wear an ISU and 59.9% (95% CI 53.7-65.9) of parents would incur additional costs for an ISU over a normal uniform. This was significantly associated with the total monthly income of a household and the educational level of the respondent. Parents (62.5%; 95% CI 56.6-68.1) indicated they would be willing to recommend ISUs to other parents. Acceptability of the novel tool of ISUs was high as defined by the lack of concern along with the willingness to pay and recommend. Considering issues of effectiveness and scalability, assessing acceptability of ISUs over time is recommended.

  16. Acceptability of impregnated school uniforms for dengue control in Thailand: a mixed methods approach

    Directory of Open Access Journals (Sweden)

    Natasha Murray

    2014-09-01

    Full Text Available Background: As current dengue control strategies have been shown to be largely ineffective in reducing dengue in school-aged children, novel approaches towards dengue control need to be studied. Insecticide-impregnated school uniforms represent an innovative approach with the theoretical potential to reduce dengue infections in school children. Objectives: This study took place in the context of a randomised control trial (RCT to test the effectiveness of permethrin-impregnated school uniforms (ISUs for dengue prevention in Chachoengsao Province, Thailand. The objective was to assess the acceptability of ISUs among parents, teachers, and principals of school children involved in the trial. Methodology: Quantitative and qualitative tools were used in a mixed methods approach. Class-clustered randomised samples of school children enrolled in the RCT were selected and their parents completed 321 self-administered questionnaires. Descriptive statistics and logistic regression were used to analyse the quantitative data. Focus group discussions and individual semi-structured interviews were conducted with parents, teachers, and principals. Qualitative data analysis involved content analysis with coding and thematic development. Results: The knowledge and experience of dengue was substantial. The acceptability of ISUs was high. Parents (87.3%; 95% CI 82.9–90.8 would allow their child to wear an ISU and 59.9% (95% CI 53.7–65.9 of parents would incur additional costs for an ISU over a normal uniform. This was significantly associated with the total monthly income of a household and the educational level of the respondent. Parents (62.5%; 95% CI 56.6–68.1 indicated they would be willing to recommend ISUs to other parents. Conclusions: Acceptability of the novel tool of ISUs was high as defined by the lack of concern along with the willingness to pay and recommend. Considering issues of effectiveness and scalability, assessing acceptability of ISUs

  17. Critical Analysis of Methods for Integrating Economic and Environmental Indicators

    NARCIS (Netherlands)

    Huguet Ferran, Pau; Heijungs, Reinout; Vogtländer, Joost G.

    2018-01-01

    The application of environmental strategies requires scoring and evaluation methods that provide an integrated vision of the economic and environmental performance of systems. The vector optimisation, ratio and weighted addition of indicators are the three most prevalent techniques for addressing

  18. Waste management facility acceptance - some findings

    International Nuclear Information System (INIS)

    Sigmon, B.

    1987-01-01

    Acceptance of waste management facilities remains a significant problem, despite years of efforts to reassure potential host communities. The tangible economic benefits from jobs, taxes, and expenditures are generally small, while the intangible risks of environmental or other impacts are difficult to evaluate and understand. No magic formula for winning local acceptance has yet been found. Limited case study and survey work does suggest some pitfalls to be avoided and some directions to be pursued. Among the most significant is the importance that communities place on controlling their own destiny. Finding a meaningful role for communities in the planning and operation of waste management facilities is a challenge that would-be developers should approach with the same creativity that characterizes their technical efforts

  19. A qualitative method proposal to improve environmental impact assessment

    International Nuclear Information System (INIS)

    Toro, Javier; Requena, Ignacio; Duarte, Oscar; Zamorano, Montserrat

    2013-01-01

    In environmental impact assessment, qualitative methods are used because they are versatile and easy to apply. This methodology is based on the evaluation of the strength of the impact by grading a series of qualitative attributes that can be manipulated by the evaluator. The results thus obtained are not objective, and all too often impacts are eliminated that should be mitigated with corrective measures. However, qualitative methodology can be improved if the calculation of Impact Importance is based on the characteristics of environmental factors and project activities instead on indicators assessed by evaluators. In this sense, this paper proposes the inclusion of the vulnerability of environmental factors and the potential environmental impact of project activities. For this purpose, the study described in this paper defined Total Impact Importance and specified a quantification procedure. The results obtained in the case study of oil drilling in Colombia reflect greater objectivity in the evaluation of impacts as well as a positive correlation between impact values, the environmental characteristics at and near the project location, and the technical characteristics of project activities. -- Highlights: • Concept of vulnerability has been used to calculate the importance impact assessment. • This paper defined Total Impact Importance and specified a quantification procedure. • The method includes the characteristics of environmental and project activities. • The application has shown greater objectivity in the evaluation of impacts. • Better correlation between impact values, environment and the project has been shown

  20. A qualitative method proposal to improve environmental impact assessment

    Energy Technology Data Exchange (ETDEWEB)

    Toro, Javier, E-mail: jjtoroca@unal.edu.co [Institute of Environmental Studies, National University of Colombia at Bogotá (Colombia); Requena, Ignacio, E-mail: requena@decsai.ugr.es [Department of Computer Science and Artificial Intelligence, University of Granada (Spain); Duarte, Oscar, E-mail: ogduartev@unal.edu.co [National University of Colombia at Bogotá, Department of Electrical Engineering and Electronics (Colombia); Zamorano, Montserrat, E-mail: zamorano@ugr.es [Department of Civil Engineering, University of Granada (Spain)

    2013-11-15

    In environmental impact assessment, qualitative methods are used because they are versatile and easy to apply. This methodology is based on the evaluation of the strength of the impact by grading a series of qualitative attributes that can be manipulated by the evaluator. The results thus obtained are not objective, and all too often impacts are eliminated that should be mitigated with corrective measures. However, qualitative methodology can be improved if the calculation of Impact Importance is based on the characteristics of environmental factors and project activities instead on indicators assessed by evaluators. In this sense, this paper proposes the inclusion of the vulnerability of environmental factors and the potential environmental impact of project activities. For this purpose, the study described in this paper defined Total Impact Importance and specified a quantification procedure. The results obtained in the case study of oil drilling in Colombia reflect greater objectivity in the evaluation of impacts as well as a positive correlation between impact values, the environmental characteristics at and near the project location, and the technical characteristics of project activities. -- Highlights: • Concept of vulnerability has been used to calculate the importance impact assessment. • This paper defined Total Impact Importance and specified a quantification procedure. • The method includes the characteristics of environmental and project activities. • The application has shown greater objectivity in the evaluation of impacts. • Better correlation between impact values, environment and the project has been shown.

  1. The use and acceptance of Other Scientifically Relevant Information (OSRI) in the U.S. Environmental Protection Agency (EPA) Endocrine Disruptor Screening Program.

    Science.gov (United States)

    Bishop, Patricia L; Willett, Catherine E

    2014-02-01

    The U.S. Environmental Protection Agency (EPA) Endocrine Disruptor Screening Program (EDSP) currently relies on an initial screening battery (Tier 1) consisting of five in vitro and six in vivo assays to evaluate a chemical's potential to interact with the endocrine system. Chemical companies may request test waivers based on Other Scientifically Relevant Information (OSRI) that is functionally equivalent to data gathered in the screening battery or that provides information on a potential endocrine effect. Respondents for 47 of the first 67 chemicals evaluated in the EDSP submitted OSRI in lieu of some or all Tier 1 tests, seeking 412 waivers, of which EPA granted only 93. For 20 of the 47 chemicals, EPA denied all OSRI and required the entire Tier 1 battery. Often, the OSRI accepted was either identical to data generated by the Tier 1 assay or indicated a positive result. Although identified as potential sources of OSRI in EPA guidance, Part 158 guideline studies for pesticide registration were seldom accepted by EPA. The 93 waivers reduced animal use by at least 3325 animals. We estimate 27,731 animals were used in the actual Tier 1 tests, with additional animals being used in preparation for testing. Even with EPA's shift toward applying 21st-century toxicology tools to screening of endocrine disruptors in the future, acceptance of OSRI will remain a primary means for avoiding duplicative testing and reducing use of animals in the EDSP. Therefore, it is essential that EPA develop a consistent and transparent basis for accepting OSRI. © 2013 Wiley Periodicals, Inc.

  2. Improved Methods for Production Manufacturing Processes in Environmentally Benign Manufacturing

    Directory of Open Access Journals (Sweden)

    Yan-Yan Wang

    2011-09-01

    Full Text Available How to design a production process with low carbon emissions and low environmental impact as well as high manufacturing performance is a key factor in the success of low-carbon production. It is important to address concerns about climate change for the large carbon emission source manufacturing industries because of their high energy consumption and environmental impact during the manufacturing stage of the production life cycle. In this paper, methodology for determining a production process is developed. This methodology integrates process determination from three different levels: new production processing, selected production processing and batch production processing. This approach is taken within a manufacturing enterprise based on prior research. The methodology is aimed at providing decision support for implementing Environmentally Benign Manufacturing (EBM and low-carbon production to improve the environmental performance of the manufacturing industry. At the first level, a decision-making model for new production processes based on the Genetic Simulated Annealing Algorithm (GSAA is presented. The decision-making model considers not only the traditional factors, such as time, quality and cost, but also energy and resource consumption and environmental impact, which are different from the traditional methods. At the second level, a methodology is developed based on an IPO (Input-Process-Output model that integrates assessments of resource consumption and environmental impact in terms of a materials balance principle for batch production processes. At the third level, based on the above two levels, a method for determining production processes that focus on low-carbon production is developed based on case-based reasoning, expert systems and feature technology for designing the process flow of a new component. Through the above three levels, a method for determining the production process to identify, quantify, assess, and optimize the

  3. Decision support methods for the environmental assessment of contamination at mining sites.

    Science.gov (United States)

    Jordan, Gyozo; Abdaal, Ahmed

    2013-09-01

    Polluting mine accidents and widespread environmental contamination associated with historic mining in Europe and elsewhere has triggered the improvement of related environmental legislation and of the environmental assessment and management methods for the mining industry. Mining has some unique features such as natural background pollution associated with natural mineral deposits, industrial activities and contamination located in the three-dimensional sub-surface space, the problem of long-term remediation after mine closure, problem of secondary contaminated areas around mine sites and abandoned mines in historic regions like Europe. These mining-specific problems require special tools to address the complexity of the environmental problems of mining-related contamination. The objective of this paper is to review and evaluate some of the decision support methods that have been developed and applied to mining contamination. In this paper, only those methods that are both efficient decision support tools and provide a 'holistic' approach to the complex problem as well are considered. These tools are (1) landscape ecology, (2) industrial ecology, (3) landscape geochemistry, (4) geo-environmental models, (5) environmental impact assessment, (6) environmental risk assessment, (7) material flow analysis and (8) life cycle assessment. This unique inter-disciplinary study should enable both the researcher and the practitioner to obtain broad view on the state-of-the-art of decision support methods for the environmental assessment of contamination at mine sites. Documented examples and abundant references are also provided.

  4. Wet-digestion of environmental sample using silver-mediated electrochemical method

    International Nuclear Information System (INIS)

    Kuwabara, Jun

    2010-01-01

    An application of silver-mediated electrochemical method to environmental samples as the effective digestion method for iodine analysis was tried. Usual digestion method for 129 I in many type of environmental sample is combustion method using quartz glass tube. Chemical yield of iodine on the combustion method reduce depending on the type of sample. The silver-mediated electrochemical method is expected to achieve very low loss of iodine. In this study, dried kombu (Laminaria) sample was tried to digest with electrochemical cell. At the case of 1g of sample, digestion was completed for about 24 hours under the electric condition of <10V and <2A. After the digestion, oxidized species of iodine was reduced to iodide by adding sodium sulfite. And then the precipitate of silver iodide was obtained. (author)

  5. Multi-method characterization of low-level radioactive waste at two Sandia National Laboratories environmental restoration sites

    International Nuclear Information System (INIS)

    Johnson, C.E. Jr.; Galloway, R.B.; Dotson, P.W.

    1999-01-01

    This paper discusses the application of multiple characterization methods to radioactive wastes generated by the Sandia National Laboratories/New Mexico (SNL/NM) Environmental Restoration (ER) Project during the excavation of buried materials at the Classified Waste Landfill (CWLF) and the Radioactive Waste Landfill (RWL). These waste streams include nuclear weapon components and other refuse that are surface contaminated or contain sealed radioactive sources with unknown radioactivity content. Characterization of radioactive constituents in RWL and CWLF waste has been problematic, due primarily to the lack of documented characterization data prior to burial. A second difficulty derives from the limited information that ER project personnel have about weapons component design and testing that was conducted in the early days of the Cold War. To reduce the uncertainties and achieve the best possible waste characterization, the ER Project has applied both project-specific and industry-standard characterization methods that, in combination, serve to define the types and quantities of radionuclide constituents in the waste. The resulting characterization data have been used to develop waste profiles for meeting disposal site waste acceptance criteria

  6. Environmental risk analysis for offshore oil and gas activities

    Energy Technology Data Exchange (ETDEWEB)

    Brude, Odd Willy; Aspholm, Ole O.; Rudberg, Anders [Det Norske Veritas (Brazil)

    2008-07-01

    Offshore oil and gas activities always have a risk for environmental impact due to potential accidental releases of oil and gas. The environmental risk can be calculated as a combination of the frequency of such accidents to occur and their environmental consequences in terms of environmental damage to habitats or populations. A method for conducting environmental risk analysis has been in use in Norwegian offshore waters for a decade, with a continuously refinement of methodology over the past years. This paper outlines the principles in the MIRA method and gives examples and discussions regarding use in different environmental compartments. The risk assessment starts with identification of oil spill scenarios with frequencies of potential release rates and spill durations. The next step is to model the oil drift for each accidental oil spill scenario. Drift and fate of oil is modeled probabilistic. Based on the oil spill scenarios and their probability of oil pollution, the potential environmental damage is quantified for each scenario. The endpoint of environmental damage is reduction of a population and the resulting recovery time (in years) for various species and habitats. Environmental risk levels are then evaluated against the operating companies' environmental acceptance criteria. (author)

  7. Entrepreneur environment management behavior evaluation method derived from environmental economy.

    Science.gov (United States)

    Zhang, Lili; Hou, Xilin; Xi, Fengru

    2013-12-01

    Evaluation system can encourage and guide entrepreneurs, and impel them to perform well in environment management. An evaluation method based on advantage structure is established. It is used to analyze entrepreneur environment management behavior in China. Entrepreneur environment management behavior evaluation index system is constructed based on empirical research. Evaluation method of entrepreneurs is put forward, from the point of objective programming-theory to alert entrepreneurs concerned to think much of it, which means to take minimized objective function as comprehensive evaluation result and identify disadvantage structure pattern. Application research shows that overall behavior of Chinese entrepreneurs environmental management are good, specially, environment strategic behavior are best, environmental management behavior are second, cultural behavior ranks last. Application results show the efficiency and feasibility of this method. Copyright © 2013 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

  8. Research report of FY 1997 on the environmentally acceptable coal utilization system feasibility survey. Environmentally acceptable coal utilization system feasibility survey in Malaysia and Vietnam (Malaysia); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Malaysia oyobi Vietnam ni okeru kankyo chowagata sekitan riyo system kanosei chosa (Malaysia ban))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In this survey, the coal utilization status in individual consumption sectors and coal distribution status in Malaysia are summarized as basic data for the introduction of environmentally acceptable coal utilization systems. In this fiscal year, the status of existing coal utilization technology and environmental issues in Malaysia are summarized as basic data for the introduction of above-mentioned systems on the basis of data and information collected by basic research and site survey in FY 1996. Malaysia is one of the rich countries producing the primary resources with crude petroleum, natural gas, hydro-power, and coal. The coal demand will be realized after saturating LNG development since 2000. The major coal consumption industries are power generation sector and cement industry sector. As expected increase in the future coal consumption, efficiency of coal utilization and environmental issues are problems in the future. Based on the FS results of this survey, the survey will be continued for planning and conducting the model project required from Malaysia. 8 figs., 34 tabs.

  9. A comprehensive environmental impact assessment method for shale gas development

    Directory of Open Access Journals (Sweden)

    Renjin Sun

    2015-03-01

    Full Text Available The great success of US commercial shale gas exploitation stimulates the shale gas development in China, subsequently, the corresponding supporting policies were issued in the 12th Five-Year Plan. But from the experience in the US shale gas development, we know that the resulted environmental threats are always an unavoidable issue, but no uniform and standard evaluation system has yet been set up in China. The comprehensive environment refers to the combination of natural ecological environment and external macro-environment. In view of this, we conducted a series of studies on how to set up a comprehensive environmental impact assessment system as well as the related evaluation methodology and models. First, we made an in-depth investigation into shale gas development procedures and any possible environmental impacts, and then compared, screened and modified environmental impact assessment methods for shale gas development. Also, we established an evaluating system and assessment models according to different status of the above two types of environment: the correlation matrix method was employed to assess the impacts on natural ecological environment and the optimization distance method was modified to evaluate the impacts on external macro-environment. Finally, we substitute the two subindexes into the comprehensive environmental impact assessment model and achieved the final numerical result of environmental impact assessment. This model can be used to evaluate if a shale gas project has any impact on environment, compare the impacts before and after a shale gas development project, or the impacts of different projects.

  10. Environmental impacts of flood control measures in climate change adaptation strategies

    DEFF Research Database (Denmark)

    Brudler, Sarah; Arnbjerg-Nielsen, Karsten; Hauschild, Michael Zwicky

    it on the surface without harming assets. When evaluating different adaptation approaches, a cost assessment is typically carried out, while environmental impacts usually are not considered. To close this gap, a Life Cycle Assessment (LCA) based method is developed, which allows to quantify environmental impacts...... only contribute up to 4% of the environmental impacts for the CMP and less than 1% for the SSA. Our method helps explain how the handling of everyday events and extreme rain events affect the environmental sustainability of climate change adaptation and it enables cities to consider the environmental......Because of climatic changes, large investments are needed to keep flood risk at an acceptable level in urban areas. Increasing dimensions of underground sewer systems and retention basins are increasingly supplemented with multi-functional approaches, aimed at managing water locally and/or route...

  11. Waste acceptance product specifications for vitrified high-level waste forms

    International Nuclear Information System (INIS)

    Applewhite-Ramsey, A.; Sproull, J.F.

    1993-01-01

    The Nuclear Waste Policy Act of 1982 mandated that all high-level waste (HLW) be sent to a federal geologic repository for permanent disposal. DOE published the Environmental Assessment in 1982 which identified borosilicate glass as the chosen HLW form. 1 In 1985 the Department of Energy instituted a Waste Acceptance Process to assure that DWPF glass waste forms would be acceptable to such a repository. This assurance was important since production of waste forms will precede repository construction and licensing. As part of this Waste Acceptance Process, the DOE Office of Civilian Radioactive Waste Management (RW) formed the Waste Acceptance Committee (WAC). The WAC included representatives from the candidate repository sites, the waste producing sites and DOE. The WAC was responsible for developing the Waste Acceptance Preliminary Specifications (WAPS) which defined the requirements the waste forms must meet to be compatible with the candidate repository geologies

  12. Simplified LCA and matrix methods in identifying the environmental aspects of a product system.

    Science.gov (United States)

    Hur, Tak; Lee, Jiyong; Ryu, Jiyeon; Kwon, Eunsun

    2005-05-01

    In order to effectively integrate environmental attributes into the product design and development processes, it is crucial to identify the significant environmental aspects related to a product system within a relatively short period of time. In this study, the usefulness of life cycle assessment (LCA) and a matrix method as tools for identifying the key environmental issues of a product system were examined. For this, a simplified LCA (SLCA) method that can be applied to Electrical and Electronic Equipment (EEE) was developed to efficiently identify their significant environmental aspects for eco-design, since a full scale LCA study is usually very detailed, expensive and time-consuming. The environmentally responsible product assessment (ERPA) method, which is one of the matrix methods, was also analyzed. Then, the usefulness of each method in eco-design processes was evaluated and compared using the case studies of the cellular phone and vacuum cleaner systems. It was found that the SLCA and the ERPA methods provided different information but they complemented each other to some extent. The SLCA method generated more information on the inherent environmental characteristics of a product system so that it might be useful for new design/eco-innovation when developing a completely new product or method where environmental considerations play a major role from the beginning. On the other hand, the ERPA method gave more information on the potential for improving a product so that it could be effectively used in eco-redesign which intends to alleviate environmental impacts of an existing product or process.

  13. Customer acceptance of renewable energy sources. Target group segmentation by means of a lifestyle typology of end users; Verbraucherakzeptanz von Erneuerbaren Energien. Zielgruppensegmentierung durch Einordnung privater Endverbraucher in eine Lebensstiltypologie

    Energy Technology Data Exchange (ETDEWEB)

    Wiedmann, Klaus-Peter; Zitzewitz, Mareike von

    2010-07-01

    Sustainable use of resources worldwide, protection of the global climate, and enhanced energy efficiency are important challenges for Germany in the 21st century. A key element is the energy turnaround by enhanced use of renewable energy sources, especially in the private sector. The publication presents an acceptance model relating to this context; it is based on the three-component attitude theory and supplemented by concrete, behaviour-related acceptance of use. Statistical methods of verification showed that acceptance in attitude is the necessary condition for acceptance of action, which in turn is the necessary condition for acceptance of use. This means that acceptance in attitude will be the most common type of acceptance and acceptance of use the least common one. On the basis of the acceptance model and of other active and passive variables, a two-stage market segmentation and a cluster analysis were carried out in order to identify four different lifestyle types that are target groups for renewable energy sources. Among the active variables of the private end consumers were personality characteristics, personal values, technology affinity, thriftiness, environmental awareness and environmental behaviour. Descriptive or passive variables were recreational activities, media consumption, orientation in style and taste, and demographic characteristics. (orig./RHM)

  14. Learning from environmental data: Methods for analysis of forest nutrition time series

    Energy Technology Data Exchange (ETDEWEB)

    Sulkava, M. (Helsinki Univ. of Technology, Espoo (Finland). Computer and Information Science)

    2008-07-01

    Data analysis methods play an important role in increasing our knowledge of the environment as the amount of data measured from the environment increases. This thesis fits under the scope of environmental informatics and environmental statistics. They are fields, in which data analysis methods are developed and applied for the analysis of environmental data. The environmental data studied in this thesis are time series of nutrient concentration measurements of pine and spruce needles. In addition, there are data of laboratory quality and related environmental factors, such as the weather and atmospheric depositions. The most important methods used for the analysis of the data are based on the self-organizing map and linear regression models. First, a new clustering algorithm of the self-organizing map is proposed. It is found to provide better results than two other methods for clustering of the self-organizing map. The algorithm is used to divide the nutrient concentration data into clusters, and the result is evaluated by environmental scientists. Based on the clustering, the temporal development of the forest nutrition is modeled and the effect of nitrogen and sulfur deposition on the foliar mineral composition is assessed. Second, regression models are used for studying how much environmental factors and properties of the needles affect the changes in the nutrient concentrations of the needles between their first and second year of existence. The aim is to build understandable models with good prediction capabilities. Sparse regression models are found to outperform more traditional regression models in this task. Third, fusion of laboratory quality data from different sources is performed to estimate the precisions of the analytical methods. Weighted regression models are used to quantify how much the precision of observations can affect the time needed to detect a trend in environmental time series. The results of power analysis show that improving the

  15. Nevada National Security Site Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-06-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept the following: • DOE hazardous and non-hazardous non-radioactive classified waste • DOE low-level radioactive waste (LLW) • DOE mixed low-level waste (MLLW) • U.S. Department of Defense (DOD) classified waste The LLW and MLLW listed above may also be classified waste. Classified waste is the only waste accepted for disposal that may be non-radioactive and shall be required to meet the waste acceptance criteria for radioactive waste as specified in this document. Classified waste may be sent to the NNSS as classified matter. Section 3.1.18 provides the requirements that must be met for permanent burial of classified matter. The NNSA/NFO and support contractors are available to assist the generator in understanding or interpreting this document. For assistance, please call the NNSA/NFO Environmental Management Operations (EMO) at (702) 295-7063, and the call will be directed to the appropriate contact.

  16. Nevada National Security Site Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    2013-01-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept the following: DOE hazardous and non-hazardous non-radioactive classified waste; DOE low-level radioactive waste (LLW); DOE mixed low-level waste (MLLW); and, U.S. Department of Defense (DOD) classified waste. The LLW and MLLW listed above may also be classified waste. Classified waste is the only waste accepted for disposal that may be non-radioactive and shall be required to meet the waste acceptance criteria for radioactive waste as specified in this document. Classified waste may be sent to the NNSS as classified matter. Section 3.1.18 provides the requirements that must be met for permanent burial of classified matter. The NNSA/NFO and support contractors are available to assist the generator in understanding or interpreting this document. For assistance, please call the NNSA/NFO Environmental Management Operations (EMO) at (702) 295-7063, and the call will be directed to the appropriate contact.

  17. [DOE method for evaluating environmental and waste management samples: Revision 1, Addendum 1

    Energy Technology Data Exchange (ETDEWEB)

    Goheen, S.C.

    1995-04-01

    The US Dapartment of Energy`s (DOE`s) environmental and waste management (EM) sampling and analysis activities require that large numbers of samples be analyzed for materials characterization, environmental surveillance, and site-remediation programs. The present document, DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods), is a supplemental resource for analyzing many of these samples.

  18. [DOE method for evaluating environmental and waste management samples: Revision 1, Addendum 1

    International Nuclear Information System (INIS)

    Goheen, S.C.

    1995-04-01

    The US Dapartment of Energy's (DOE's) environmental and waste management (EM) sampling and analysis activities require that large numbers of samples be analyzed for materials characterization, environmental surveillance, and site-remediation programs. The present document, DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods), is a supplemental resource for analyzing many of these samples

  19. A study of environmental polluting factors by neutron activation method

    International Nuclear Information System (INIS)

    Paunoiu, C.; Doca, C.

    2004-01-01

    The paper presents: a) some importance factors of the environmental pollution; b) the theoretical aspects of the Neutron Activation Analysis (NAA) used in the study of the environmental pollution; c) the NAA specific hardware and software facilities existing at the Institute for Nuclear Research; d) a direct application of the NAA method in the study of the environmental pollution for Pitesti city by the analysis of some ground and vegetation samples; e) results and conclusions. (authors)

  20. New Internet search volume-based weighting method for integrating various environmental impacts

    Energy Technology Data Exchange (ETDEWEB)

    Ji, Changyoon, E-mail: changyoon@yonsei.ac.kr; Hong, Taehoon, E-mail: hong7@yonsei.ac.kr

    2016-01-15

    Weighting is one of the steps in life cycle impact assessment that integrates various characterized environmental impacts as a single index. Weighting factors should be based on the society's preferences. However, most previous studies consider only the opinion of some people. Thus, this research proposes a new weighting method that determines the weighting factors of environmental impact categories by considering public opinion on environmental impacts using the Internet search volumes for relevant terms. To validate the new weighting method, the weighting factors for six environmental impacts calculated by the new weighting method were compared with the existing weighting factors. The resulting Pearson's correlation coefficient between the new and existing weighting factors was from 0.8743 to 0.9889. It turned out that the new weighting method presents reasonable weighting factors. It also requires less time and lower cost compared to existing methods and likewise meets the main requirements of weighting methods such as simplicity, transparency, and reproducibility. The new weighting method is expected to be a good alternative for determining the weighting factor. - Highlight: • A new weighting method using Internet search volume is proposed in this research. • The new weighting method reflects the public opinion using Internet search volume. • The correlation coefficient between new and existing weighting factors is over 0.87. • The new weighting method can present the reasonable weighting factors. • The proposed method can be a good alternative for determining the weighting factors.

  1. New Internet search volume-based weighting method for integrating various environmental impacts

    International Nuclear Information System (INIS)

    Ji, Changyoon; Hong, Taehoon

    2016-01-01

    Weighting is one of the steps in life cycle impact assessment that integrates various characterized environmental impacts as a single index. Weighting factors should be based on the society's preferences. However, most previous studies consider only the opinion of some people. Thus, this research proposes a new weighting method that determines the weighting factors of environmental impact categories by considering public opinion on environmental impacts using the Internet search volumes for relevant terms. To validate the new weighting method, the weighting factors for six environmental impacts calculated by the new weighting method were compared with the existing weighting factors. The resulting Pearson's correlation coefficient between the new and existing weighting factors was from 0.8743 to 0.9889. It turned out that the new weighting method presents reasonable weighting factors. It also requires less time and lower cost compared to existing methods and likewise meets the main requirements of weighting methods such as simplicity, transparency, and reproducibility. The new weighting method is expected to be a good alternative for determining the weighting factor. - Highlight: • A new weighting method using Internet search volume is proposed in this research. • The new weighting method reflects the public opinion using Internet search volume. • The correlation coefficient between new and existing weighting factors is over 0.87. • The new weighting method can present the reasonable weighting factors. • The proposed method can be a good alternative for determining the weighting factors.

  2. FFTBM and primary pressure acceptance criterion

    International Nuclear Information System (INIS)

    Prosek, A.

    2004-01-01

    When thermalhydraulic computer codes are used for simulation in the area of nuclear engineering the question is how to conduct an objective comparison between the code calculation and measured data. To answer this the fast Fourier transform based method (FFTBM) was developed. When the FFTBM method was developed the acceptance criteria for primary pressure and total accuracy were set. In the recent study the FFTBM method was used for accuracy quantification of RD-14M large LOCA test B9401 calculations. The blind accuracy analysis indicated good total accuracy while the primary pressure criterion was not fulfilled. The objective of the study was therefore to investigate the reasons for not fulfilling the primary pressure acceptance criterion and the applicability of the criterion to experimental facilities simulating heavy water reactor. The results of the open quantitative analysis showed that sensitivity analysis for influence parameters provide sufficient information to judge in which calculation the accuracy of primary pressure is acceptable. (author)

  3. Comparative research on NIMBY risk acceptability between Chinese and Japanese college students.

    Science.gov (United States)

    Wu, Yunqing; Zhai, Guofang; Li, Shasha; Ren, Chongqiang; Tsuchida, Shoji

    2014-10-01

    Along with the progressive acceleration of urbanization, the need to identify potentially troublesome "Not In My Back Yard" (NIMBY) facilities in the city is inevitable. To resolve NIMBY conflict, it is important to know people's NIMBY risk acceptability for these facilities. A questionnaire survey was used among Chinese and Japanese college students to identify NIMBY risk acceptability. LISREL was used to construct a structural equation model to analyze the difference in NIMBY risk acceptability between the Chinese and Japanese college students. Factors that may affect NIMBY risk acceptability were analyzed: "perceiving utility," "perceiving risk," "trust in government," "reasonable compensation," and "procedural justice." The findings show that Japanese students' concerns were greater than Chinese students' concerns. Perceiving utility and perceiving risk were the most important factors that affect people's NIMBY risk acceptability, followed by procedural justice, trust in government, and reasonable compensation. There is a difference between the different cultural backgrounds in confronting the risk: Chinese students focus more on the reputation and value of real estate, while Japanese students pay more attention to environmental pollution and damage to health. Furthermore, cultural influences play a role in students' risk perception. To improve the risk acceptability for NIMBY facilities and provide a basis for resolving NIMBY conflicts, it is necessary to ensure the benefits of the NIMBY facility while reducing environmental pollution. The findings of this study may be of interest for policy makers and practitioners to devise future NIMBY strategies.

  4. Acceptance of family planning methods by induced abortion seekers: An observational study over five years.

    Science.gov (United States)

    Kathpalia, S K

    2016-01-01

    Prior to legalization of abortion, induced abortions were performed in an illegal manner and that resulted in many complications hence abortion was legalized in India in 1971 and the number of induced abortions has been gradually increasing since then. One way of preventing abortions is to provide family planning services to these abortion seekers so that same is not repeated. The study was performed to find out the acceptance of contraception after abortion. A prospective study was performed over a period of five years from 2010 to 2014. The study group included all the cases reporting for abortion. A proforma was filled in detail to find out the type of contraception being used before pregnancy and acceptance of contraception after abortion. The existing facilities were also evaluated. 1228 abortions were performed over a period of five years. 94.5% of abortions were during the first trimester. 39.9% had not used any contraceptive before, contraceptives used were natural and barrier which had high failure. The main indication for seeking abortion was failure of contraception and completion of family. 39.6% of patients accepted sterilization as a method of contraception. The existing post abortion family planning services are inadequate. Post abortion period is one which is important to prevent subsequent abortions and family planning services after abortion need to be strengthened.

  5. How Smog Awareness Influences Public Acceptance of Congestion Charge Policies

    Directory of Open Access Journals (Sweden)

    Lingyi Zhou

    2017-09-01

    Full Text Available Although various studies have investigated public acceptance of congestion charge policies, most of them have focused on behavioral and policy-related factors, and did not consider the moderating influence that individual concern about smog and perceived smog risk may have on public acceptance. This paper takes the congestion charge policy in China, targeted at smog and traffic control, and checks how smog awareness—including smog concerns and perceived smog risks, besides behavioral and policy-related factors—might influence public acceptance of the policy. In this paper, we found both a direct and moderating causal relationship between smog awareness and public acceptance. Based on a sample of 574 valid questionnaires in Beijing and Shanghai in 2016, an ordered logistic regression modeling approach was used to delineate the causality between smog awareness and public acceptance. We found that both smog concerns, such as perceived smog risk, and willingness to pay (WTP were both directly and indirectly positively correlated with public acceptance. These findings imply that policymakers should increase policy fairness with environmental-oriented policy design and should express potential policy effectiveness of the smog controlling policy to citizens to increase their acceptance level.

  6. Key acceptability attributes of orodispersible films.

    Science.gov (United States)

    Scarpa, Mariagiovanna; Paudel, Amrit; Kloprogge, Frank; Hsiao, Wen Kai; Bresciani, Massimo; Gaisford, Simon; Orlu, Mine

    2018-04-01

    The features rendering orodispersible films (ODFs) patient-centric formulations are widely discussed in the scientific literature. However there is a lack of research studies exploring ODF characteristics with a potential impact on end-user acceptability. The aim of this study was to identify the key ODF characteristics affecting end-user acceptability by developing in vitro test methods for the prediction of ODFs acceptability and correlate these formulation characteristics with the data obtained from a human panel study. Four drug-free single-polymer films were prepared by solvent casting. Solutions of poly(vinyl) alcohol (PVOH) 39 KDa (P1), PVOH 197 KDa (P2), carboxymethylcellulose (CMC) 395 KDa (C1), and CMC 725 KDa (C2) were prepared. Texture analysis and Dynamic Mechanical Analysis (DMA) were used to assess film tack. Petri dish and drop methods were used to assess disintegration time. A human panel of 24 healthy young adults was employed to identify end-user acceptability criteria of the four study film samples. Texture analysis data of ODF tack were not found to be in agreement with the in vivo perceived stickiness in the mouth. However, measurement of the area under the adhesive force curve obtained by DMA correlated with in vivo perceived stickiness data for all samples. The disintegration times obtained by drop method were more comparable to human panel data than the petri dish method. Hence DMA and drop methods proved to be promising methodologies for the prediction of the end-user acceptability. The type and molecular weight of the film-forming polymer had a strong influence on stickiness perception, whereas only polymeric molecular weight influenced perceived disintegration time. The human panel study showed that Participant Reported Outcomes (PROs) for the perceived stickiness in the mouth and disintegration time of test films received significantly different scores between samples, and thus were identified as the key attributes with the

  7. Environmental technology verification methods

    CSIR Research Space (South Africa)

    Szewczuk, S

    2016-03-01

    Full Text Available Environmental Technology Verification (ETV) is a tool that has been developed in the United States of America, Europe and many other countries around the world to help innovative environmental technologies reach the market. Claims about...

  8. Theoretical reflections on the connection between environmental assessment methods and conflict

    International Nuclear Information System (INIS)

    Persson, Jesper

    2006-01-01

    Today there is a great variety of methods for evaluating the environmental impact of plans, programs and projects. But which of these methods should planners and managers choose? This theoretical article explores the connection between conflicts, communication and rationality in assessment methods. It focuses on the form (rationality) and substance of communication, i.e. what we should communicate about. The outcome supports the view that environmental assessments should be based on value- and interest-focused thinking, following a teleological ethic, when goals, alternatives and compensations are to be developed and impacts evaluated

  9. Implementation of the 3Rs (refinement, reduction, and replacement): validation and regulatory acceptance considerations for alternative toxicological test methods.

    Science.gov (United States)

    Schechtman, Leonard M

    2002-01-01

    Toxicological testing in the current regulatory environment is steeped in a history of using animals to answer questions about the safety of products to which humans are exposed. That history forms the basis for the testing strategies that have evolved to satisfy the needs of the regulatory bodies that render decisions that affect, for the most part, virtually all phases of premarket product development and evaluation and, to a lesser extent, postmarketing surveillance. Only relatively recently have the levels of awareness of, and responsiveness to, animal welfare issues reached current proportions. That paradigm shift, although sluggish, has nevertheless been progressive. New and alternative toxicological methods for hazard evaluation and risk assessment have now been adopted and are being viewed as a means to address those issues in a manner that considers humane treatment of animals yet maintains scientific credibility and preserves the goal of ensuring human safety. To facilitate this transition, regulatory agencies and regulated industry must work together toward improved approaches. They will need assurance that the methods will be reliable and the results comparable with, or better than, those derived from the current classical methods. That confidence will be a function of the scientific validation and resultant acceptance of any given method. In the United States, to fulfill this need, the Interagency Coordinating Committee on the Validation of Alternative Methods (ICCVAM) and its operational center, the National Toxicology Program Interagency Center for the Evaluation of Alternative Toxicological Methods (NICEATM), have been constituted as prescribed in federal law. Under this mandate, ICCVAM has developed a process and established criteria for the scientific validation and regulatory acceptance of new and alternative methods. The role of ICCVAM in the validation and acceptance process and the criteria instituted toward that end are described. Also

  10. Assessment of chemical exposures: calculation methods for environmental professionals

    National Research Council Canada - National Science Library

    Daugherty, Jack E

    1997-01-01

    ... on by scientists, businessmen, and policymakers. Assessment of Chemical Exposures: Calculation Methods for Environmental Professionals addresses the expanding scope of exposure assessments in both the workplace and environment...

  11. Application of statistical classification methods for predicting the acceptability of well-water quality

    Science.gov (United States)

    Cameron, Enrico; Pilla, Giorgio; Stella, Fabio A.

    2018-01-01

    The application of statistical classification methods is investigated—in comparison also to spatial interpolation methods—for predicting the acceptability of well-water quality in a situation where an effective quantitative model of the hydrogeological system under consideration cannot be developed. In the example area in northern Italy, in particular, the aquifer is locally affected by saline water and the concentration of chloride is the main indicator of both saltwater occurrence and groundwater quality. The goal is to predict if the chloride concentration in a water well will exceed the allowable concentration so that the water is unfit for the intended use. A statistical classification algorithm achieved the best predictive performances and the results of the study show that statistical classification methods provide further tools for dealing with groundwater quality problems concerning hydrogeological systems that are too difficult to describe analytically or to simulate effectively.

  12. From waste to technology. An environmental acceptable technology

    International Nuclear Information System (INIS)

    Tabasaran, O.

    2001-01-01

    Modern thermal waste treatment has the task to produce deposit capable inert products and is able to reduce contaminants emitted to the environment. In addition waste to energy plants enable the recovery of energy by a maximum amount of environmental protection even in the comparison with modern power stations or other industrial plants. Over that, regarding modern technical solutions, today's waste to energy plants can no more be turned on financial reasons [it

  13. Willingness to accept climate change strategies: the effect of values and norms

    Energy Technology Data Exchange (ETDEWEB)

    Nilsson, A.; Borgstede, C. von; Biel, A. [Goeteborg Univ. (Sweden). Dept. of Psychology

    2004-09-15

    The present study examined how values, organizational goals and norms influence willingness to accept climate change policy measures within organizations. Respondents were 356 decision makers within the public and private sectors in a metropolitan area of Sweden. Regression models were estimated to investigate the mediating effect of norms on the relationship between values and support of policy measures aimed at reducing greenhouse gas emissions. The results showed that for decision makers in the public sector, but not in the private sector, environmental values were important determinants of willingness to accept climate change policy measures. As hypothesized, these effects were mediated by norms. Together these findings corroborate earlier research on public support for environmental movement. (author)

  14. Methods for detecting the environmental coccoid form of Helicobacter pylori

    Directory of Open Access Journals (Sweden)

    Mahnaz eMazaheri Assadi

    2015-05-01

    Full Text Available Helicobacter pylori is recognized as the most common pathogen to cause gastritis, peptic and duodenal ulcers, and gastric cancer. The organisms are found in two forms: 1 spiral-shaped bacillus and 2 coccoid. H. pylori coccoid form, generally found in the environment, is the transformed form of the normal spiral-shaped bacillus after exposed to water or adverse environmental conditions such as exposure to sub-inhibitory concentrations of antimicrobial agents. The putative infectious capability and the viability of H. pylori under environmental conditions are controversial. This disagreement is partially due to the fact of lack in detecting the coccoid form of H. pylori in the environment. Accurate and effective detection methods of H. pylori will lead to rapid treatment and disinfection, and less human health damages and reduction in health care costs. In this review, we provide a brief introduction to H. pylori environmental coccoid forms, their transmission and detection methods. We further discuss the use of these detection methods including their accuracy and efficiency.

  15. Project-Based Learning in Undergraduate Environmental Chemistry Laboratory: Using EPA Methods to Guide Student Method Development for Pesticide Quantitation

    Science.gov (United States)

    Davis, Eric J.; Pauls, Steve; Dick, Jonathan

    2017-01-01

    Presented is a project-based learning (PBL) laboratory approach for an upper-division environmental chemistry or quantitative analysis course. In this work, a combined laboratory class of 11 environmental chemistry students developed a method based on published EPA methods for the extraction of dichlorodiphenyltrichloroethane (DDT) and its…

  16. Acceptance test procedure for High Pressure Water Jet System

    International Nuclear Information System (INIS)

    Crystal, J.B.

    1995-01-01

    The overall objective of the acceptance test is to demonstrate a combined system. This includes associated tools and equipment necessary to perform cleaning in the 105 K East Basin (KE) for achieving optimum reduction in the level of contamination/dose rate on canisters prior to removal from the KE Basin and subsequent packaging for disposal. Acceptance tests shall include necessary hardware to achieve acceptance of the cleaning phase of canisters. This acceptance test procedure will define the acceptance testing criteria of the high pressure water jet cleaning fixture. The focus of this procedure will be to provide guidelines and instructions to control, evaluate and document the acceptance testing for cleaning effectiveness and method(s) of removing the contaminated surface layer from the canister presently identified in KE Basin. Additionally, the desired result of the acceptance test will be to deliver to K Basins a thoroughly tested and proven system for underwater decontamination and dose reduction. This report discusses the acceptance test procedure for the High Pressure Water Jet

  17. Application of a value-based equivalency method to assess environmental damage compensation under the European Environmental Liability Directive

    NARCIS (Netherlands)

    Martin-Ortega, J.; Brouwer, R.; Aiking, H.

    2011-01-01

    The Environmental Liability Directive (ELD) establishes a framework of liability based on the 'polluter-pays' principle to prevent and remedy environmental damage. The ELD requires the testing of appropriate equivalency methods to assess the scale of compensatory measures needed to offset damage.

  18. Incorporating cumulative effects into environmental assessments of mariculture: Limitations and failures of current siting methods

    International Nuclear Information System (INIS)

    King, Sarah C.; Pushchak, Ronald

    2008-01-01

    Assessing and evaluating the cumulative impacts of multiple marine aquaculture facilities has proved difficult in environmental assessment. A retrospective review of 23 existing mariculture farms in southwestern New Brunswick was conducted to determine whether cumulative interactions would have justified site approvals. Based on current scientific evidence of cumulative effects, six new criteria were added to a set of far-field impacts and other existing criteria were expanded to include regional and cumulative environmental impacts in Hargrave's [Hargrave BT. A traffic light decision system for marine finfish aquaculture siting. Ocean Coast Manag 2002; 45:215-35.] Traffic Light Decision Support System (DSS) presently used in Canadian aquaculture environmental assessments. Before mitigation, 19 of the 23 sites failed the amended set of criteria and after considering mitigation, 8 sites failed. Site and ecosystem indices yielded varying site acceptability scores; however, many sites would not have been approved if siting decisions had been made within a regional management framework and cumulative impact criteria were considered in the site evaluation process

  19. A simple method to identify areas of environmental risk due to manure application.

    Science.gov (United States)

    Flores, Héctor; Arumí, José Luis; Rivera, Diego; Lagos, L Octavio

    2012-06-01

    The management of swine manure is becoming an important environmental issue in Chile. One option for the final disposal of manure is to use it as a biofertilizer, but this practice could impact the surrounding environment. To assess the potential environmental impacts of the use of swine manure as a biofertilizer, we propose a method to identify zones of environmental risk through indices. The method considers two processes: nutrient runoff and solute leaching, and uses available information about soils, crops and management practices (irrigation, fertilization, and rotation). We applied the method to qualitatively assess the environmental risk associated with the use of swine manure as a biofertilizer in an 8,000-pig farm located in Central Chile. Results showed that the farm has a moderate environmental risk, but some specific locations have high environmental risks, especially those associated with impacts on areas surrounding water resources. This information could assist the definition of better farm-level management practices, as well as the preservation of riparian vegetation acting as buffer strips. The main advantage of our approach is that it combines qualitative and quantitative information, including particular situations or field features based on expert knowledge. The method is flexible, simple, and can be easily extended or adapted to other processes.

  20. Pregnancy planning and acceptance among Danish pregnant women

    DEFF Research Database (Denmark)

    Rasch, V; Knudsen, L B; Wielandt, H

    2001-01-01

    OBJECTIVE: To study how living conditions influence pregnancy planning and acceptance among Danish women. METHOD: A cross-sectional questionnaire study performed among 3516 pregnant women attending Odense University Hospital, Denmark. The study population consisted of women with spontaneous...... abortion, women with ectopic pregnancies, women attending antenatal care and women with induced abortion. They were divided into four groups: women with planned and accepted pregnancies (accepting planners, n=2137), women who accepted an initially unplanned pregnancy (accepting non-planners, n=1006), women...... who rejected an initially planned pregnancy (rejecting planners, n=31), and women with unplanned and rejected pregnancies (rejecting non-planners, n=342). The association between socio-economic characteristics and pregnancy planning and acceptance was evaluated by comparing accepting non...

  1. Environmental risk assessment for plant pests: a procedure to evaluate their impacts on ecosystem services

    DEFF Research Database (Denmark)

    Gilioli, G.; Schrader, G.; Baker, R.H.A.

    2014-01-01

    and temporal resolution is then used to explore how an IAS, as an exogenous driving force, may trigger modifications in the target environment. The method presented here provides a standardized approach to generate comparable and reproducible results for environmental risk assessment as a component of Pest...... Risk Analysis. The method enables the assessment of overall environmental risk which integrates the impacts on different components of the environment and their probabilities of occurrence. The application of the proposed scheme is illustrated by evaluating the environmental impacts of the invasive......The current methods to assess the environmental impacts of plant pests differ in their approaches and there is a lack of the standardized procedures necessary to provide accurate and consistent results, demonstrating the complexity of developing a commonly accepted scheme for this purpose...

  2. Acceptance- versus Change-Based Pain Management: The Role of Psychological Acceptance

    Science.gov (United States)

    Blacker, Kara J.; Herbert, James D.; Forman, Evan M.; Kounios, John

    2012-01-01

    This study compared two theoretically opposed strategies for acute pain management: an acceptance-based and a change-based approach. These two strategies were compared in a within-subjects design using the cold pressor test as an acute pain induction method. Participants completed a baseline pain tolerance assessment followed by one of the two…

  3. Assessment of Environmental Problems and Methods of Waste ...

    African Journals Online (AJOL)

    This study assessed the environmental problems and methods of waste management in Ado-Ekiti, Nigeria. Waste management is the collection, transportation, processing, recycling or disposal of waste materials, usually the one produced by human activities in an effort to reduce their effect on human health or on local ...

  4. A new method of regional eco-environmental quality assessment and its application.

    Science.gov (United States)

    Wang, Xiaodan; Cao, Yingzi; Zhong, Xianghao; Gao, Pan

    2012-01-01

    Eco-environmental quality assessment (EQA) is an intricate and challenging task that must take into account numerous natural, economic, political, and social factors, which are subject to multiple conflicting criteria. In this paper, a methodological reference framework is developed for EQA that combines the fuzzy Delphi method (FDM) and fuzzy analytical hierarchy process (FAHP) with a geographic information system (GIS). The proposed method significantly improves the accuracy and reliability of evaluation results through the incorporation of fuzzy set theory. A GIS not only has the ability to store and analyze large amounts of spatial data from different sources but also provides a consistent visualization environment for displaying the input data and the results of EQA. Furthermore, unlike prior EQAs, the proposed method can support the dynamic estimation of regional eco-environmental quality by updating historical spatiotemporal data at little additional cost. A case study is presented for the western Tibetan Plateau. The study results show that worse, bad, and moderate eco-environmental quality classes comprised 16.58, 20.15, and 24.84% of the total area, respectively. Good and better eco-environmental quality classes accounted for 38.43%. This result indicates that nearly 62% of the total area is eco-environmentally vulnerable. The results verified the usefulness and feasibility of the proposed method. The EQA can also help local managers make scientifically based and effective decisions about Tibetan eco-environmental protection and land use. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

  5. A multipole acceptability criterion for electronic structure theory

    International Nuclear Information System (INIS)

    Schwegler, E.; Challacombe, M.; Head-Gordon, M.

    1998-01-01

    Accurate and computationally inexpensive estimates of multipole expansion errors are crucial to the success of several fast electronic structure methods. In this paper, a new nonempirical multipole acceptability criterion is described that is directly applicable to expansions of high order moments. Several model calculations typical of electronic structure theory are presented to demonstrate its performance. For cases involving small translation distances, accuracies are increased by up to five orders of magnitude over an empirical criterion. The new multipole acceptance criterion is on average within an order of magnitude of the exact expansion error. Use of the multipole acceptance criterion in hierarchical multipole based methods as well as in traditional electronic structure methods is discussed. copyright 1998 American Institute of Physics

  6. Guide for environmental radiological surveillance at ERDA installations

    International Nuclear Information System (INIS)

    Corley, J.P.; Denham, D.H.; Michels, D.E.; Olsen, A.R.; Waite, D.A.

    1977-03-01

    This Guide is intended to: Provide recommended methods, procedures, and performance criteria to bring greater comparability to ERDA environmental monitoring and reporting systems; provide ERDA management, particularly the Headquarters' Division of Safety, Standards, and Compliance (SSC) and field offices, with a broad review of accepted radiological surveillance practices for use in the evaluation of environmental surveillance programs at ERDA facilities; and delineate the capabilities and limitations of the various environmental monitoring systems for radioactivity currently used at ERDA sites, including technical areas where there is either an inadequate basis for procedural selection or where further developmental work may be warranted. The discussion of equipment, measurement techniques, and quality control procedures, although believed to represent current technology, is subject to continuing change as technological improvements become available

  7. Pollution control through innovation and technological development. Environmental policy concepts of the BDI

    Energy Technology Data Exchange (ETDEWEB)

    Meller, E

    1987-02-01

    Increasing acceptance of pollution control tasks call for enhanced innovative power both of industry and politics. One pre-requisite of boosting innovation is an environmental policy concept fit into the framework of the economic policy: A clear environmental strategy stating priorities and foreseeable, fixed data for the required adjustment of industry, selection of pollution control measures by means of verifiable cost-benefit analyses in cooperation with industry, embedding environmental policy in the context of the free market system and harmonization of means and methods on an international level. (orig./HSCH).

  8. Acceptability of an existing, female-controlled contraceptive method that could potentially protect against HIV: a comparison of diaphragm users and other method users.

    Science.gov (United States)

    Bird, Sheryl Thorburn; Harvey, S Marie; Maher, Julie E; Beckman, Linda J

    2004-01-01

    The diaphragm, an internal barrier contraceptive device, is a candidate for a female-controlled method for preventing human immunodeficiency virus (HIV) and other sexually transmitted infections (STIs). This study's objective was to examine how women who use the diaphragm differ from women using the pill and/or condoms with respect to factors hypothesized to influence the acceptability of contraceptive methods. Our goal was to increase understanding of who finds the diaphragm acceptable and why. We conducted a cross-sectional telephone survey with selected female members of a managed care organization. For this analysis, we limited the sample to 585 women currently using the diaphragm (n = 196), pill (n = 200), condoms (n = 132), or pill and condoms (n = 57). We conducted bivariate analyses and multinomial logistic regression analyses to assess the associations between selected characteristics and diaphragm use. Diaphragm use was significantly associated with several variables. Of particular interest, placing less importance on hormonal method characteristics was significantly associated with diaphragm use (versus use of the pill, condoms, or both). Placing more importance on barrier method attributes was significantly associated with diaphragm use (versus pill use, alone or with condoms). In addition, lower condom use self-efficacy was significantly associated with diaphragm use (versus condom use, alone or with pill). Lack of motivation to avoid HIV/STIs was significantly associated with using the diaphragm versus condoms (only). These results have important implications for future research, interventions, counseling strategies for providers, and product development. Our findings suggest that if the diaphragm protects against HIV, it could be a desirable option for some women.

  9. Radioactive waste disposal and public acceptance aspects

    Energy Technology Data Exchange (ETDEWEB)

    Ulhoa, Barbara M.A.; Aleixo, Bruna L.; Mourao, Rogerio P.; Ferreira, Vinicius V.M., E-mail: mouraor@cdtn.b, E-mail: vvmf@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2011-07-01

    Part of the public opinion around the world considers the wastes generated due to nuclear applications as the biggest environmental problem of the present time. The development of a solution that satisfies everybody is a great challenge, in that obtaining public acceptance for nuclear enterprises is much more challenging than solving the technical issues involved. Considering that the offering of a final solution that closes the radioactive waste cycle has a potentially positive impact on public opinion, the objective of this work is to evaluate the amount of the radioactive waste volume disposed in a five-year period in several countries and gauge the public opinion regarding nuclear energy. The results show that the volume of disposed radioactive waste increased, a fact that stresses the importance of promoting discussions about repositories and public acceptance. (author)

  10. Radioactive waste disposal and public acceptance aspects

    International Nuclear Information System (INIS)

    Ulhoa, Barbara M.A.; Aleixo, Bruna L.; Mourao, Rogerio P.; Ferreira, Vinicius V.M.

    2011-01-01

    Part of the public opinion around the world considers the wastes generated due to nuclear applications as the biggest environmental problem of the present time. The development of a solution that satisfies everybody is a great challenge, in that obtaining public acceptance for nuclear enterprises is much more challenging than solving the technical issues involved. Considering that the offering of a final solution that closes the radioactive waste cycle has a potentially positive impact on public opinion, the objective of this work is to evaluate the amount of the radioactive waste volume disposed in a five-year period in several countries and gauge the public opinion regarding nuclear energy. The results show that the volume of disposed radioactive waste increased, a fact that stresses the importance of promoting discussions about repositories and public acceptance. (author)

  11. Method for environmental risk analysis (MIRA) revision 2007; Metode for miljoerettet risikoanalyse (MIRA) revisjon 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-04-15

    OLF's instruction manual for carrying out environmental risk analyses provides a united approach and a common framework for environmental risk assessments. This is based on the best information available. The manual implies standardizations of a series of parameters, input data and partial analyses that are included in the environmental risk analysis. Environmental risk analyses carried out according to the MIRA method will thus be comparable between fields and between companies. In this revision an update of the text in accordance with today's practice for environmental risk analyses and prevailing regulations is emphasized. Moreover, method adjustments for especially protected beach habitats have been introduced, as well as a general method for estimating environmental risk concerning fish. Emphasis has also been put on improving environmental risk analysis' possibilities to contribute to a better management of environmental risk in the companies (ml)

  12. A systematic review of patient acceptance of consumer health information technology.

    Science.gov (United States)

    Or, Calvin K L; Karsh, Ben-Tzion

    2009-01-01

    A systematic literature review was performed to identify variables promoting consumer health information technology (CHIT) acceptance among patients. The electronic bibliographic databases Web of Science, Business Source Elite, CINAHL, Communication and Mass Media Complete, MEDLINE, PsycArticles, and PsycInfo were searched. A cited reference search of articles meeting the inclusion criteria was also conducted to reduce misses. Fifty-two articles met the selection criteria. Among them, 94 different variables were tested for associations with acceptance. Most of those tested (71%) were patient factors, including sociodemographic characteristics, health- and treatment-related variables, and prior experience or exposure to computer/health technology. Only ten variables were related to human-technology interaction; 16 were organizational factors; and one was related to the environment. In total, 62 (66%) were found to predict acceptance in at least one study. Existing literature focused largely on patient-related factors. No studies examined the impact of social and task factors on acceptance, and few tested the effects of organizational or environmental factors on acceptance. Future research guided by technology acceptance theories should fill those gaps to improve our understanding of patient CHIT acceptance, which in turn could lead to better CHIT design and implementation.

  13. Sustainability appraisal. Quantitative methods and mathematical techniques for environmental performance evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Erechtchoukova, Marina G.; Khaiter, Peter A. [York Univ., Toronto, ON (Canada). School of Information Technology; Golinska, Paulina (eds.) [Poznan Univ. of Technology (Poland)

    2013-06-01

    The book will present original research papers on the quantitative methods and techniques for the evaluation of the sustainability of business operations and organizations' overall environmental performance. The book contributions will describe modern methods and approaches applicable to the multi-faceted problem of sustainability appraisal and will help to fulfil generic frameworks presented in the literature with the specific quantitative techniques so needed in practice. The scope of the book is interdisciplinary in nature, making it of interest to environmental researchers, business managers and process analysts, information management professionals and environmental decision makers, who will find valuable sources of information for their work-related activities. Each chapter will provide sufficient background information, a description of problems, and results, making the book useful for a wider audience. Additional software support is not required. One of the most important issues in developing sustainable management strategies and incorporating ecodesigns in production, manufacturing and operations management is the assessment of the sustainability of business operations and organizations' overall environmental performance. The book presents the results of recent studies on sustainability assessment. It provides a solid reference for researchers in academia and industrial practitioners on the state-of-the-art in sustainability appraisal including the development and application of sustainability indices, quantitative methods, models and frameworks for the evaluation of current and future welfare outcomes, recommendations on data collection and processing for the evaluation of organizations' environmental performance, and eco-efficiency approaches leading to business process re-engineering.

  14. HOW TO DEAL WITH WASTE ACCEPTANCE UNCERTAINTY USING THE WASTE ACCEPTANCE CRITERIA FORECASTING AND ANALYSIS CAPABILITY SYSTEM (WACFACS)

    Energy Technology Data Exchange (ETDEWEB)

    Redus, K. S.; Hampshire, G. J.; Patterson, J. E.; Perkins, A. B.

    2002-02-25

    The Waste Acceptance Criteria Forecasting and Analysis Capability System (WACFACS) is used to plan for, evaluate, and control the supply of approximately 1.8 million yd3 of low-level radioactive, TSCA, and RCRA hazardous wastes from over 60 environmental restoration projects between FY02 through FY10 to the Oak Ridge Environmental Management Waste Management Facility (EMWMF). WACFACS is a validated decision support tool that propagates uncertainties inherent in site-related contaminant characterization data, disposition volumes during EMWMF operations, and project schedules to quantitatively determine the confidence that risk-based performance standards are met. Trade-offs in schedule, volumes of waste lots, and allowable concentrations of contaminants are performed to optimize project waste disposition, regulatory compliance, and disposal cell management.

  15. HOW TO DEAL WITH WASTE ACCEPTANCE UNCERTAINTY USING THE WASTE ACCEPTANCE CRITERIA FORECASTING AND ANALYSIS CAPABILITY SYSTEM (WACFACS)

    International Nuclear Information System (INIS)

    Redus, K. S.; Hampshire, G. J.; Patterson, J. E.; Perkins, A. B.

    2002-01-01

    The Waste Acceptance Criteria Forecasting and Analysis Capability System (WACFACS) is used to plan for, evaluate, and control the supply of approximately 1.8 million yd3 of low-level radioactive, TSCA, and RCRA hazardous wastes from over 60 environmental restoration projects between FY02 through FY10 to the Oak Ridge Environmental Management Waste Management Facility (EMWMF). WACFACS is a validated decision support tool that propagates uncertainties inherent in site-related contaminant characterization data, disposition volumes during EMWMF operations, and project schedules to quantitatively determine the confidence that risk-based performance standards are met. Trade-offs in schedule, volumes of waste lots, and allowable concentrations of contaminants are performed to optimize project waste disposition, regulatory compliance, and disposal cell management

  16. Sensitivity Analysis of Hydraulic Methods Regarding Hydromorphologic Data Derivation Methods to Determine Environmental Water Requirements

    Directory of Open Access Journals (Sweden)

    Alireza Shokoohi

    2015-07-01

    Full Text Available This paper studies the accuracy of hydraulic methods in determining environmental flow requirements. Despite the vital importance of deriving river cross sectional data for hydraulic methods, few studies have focused on the criteria for deriving this data. The present study shows that the depth of cross section has a meaningful effect on the results obtained from hydraulic methods and that, considering fish as the index species for river habitat analysis, an optimum depth of 1 m should be assumed for deriving information from cross sections. The second important parameter required for extracting the geometric and hydraulic properties of rivers is the selection of an appropriate depth increment; ∆y. In the present research, this parameter was found to be equal to 1 cm. The uncertainty of the environmental discharge evaluation, when allocating water in areas with water scarcity, should be kept as low as possible. The Manning friction coefficient (n is an important factor in river discharge calculation. Using a range of "n" equal to 3 times the standard deviation for the study area, it is shown that the influence of friction coefficient on the estimation of environmental flow is much less than that on the calculation of river discharge.

  17. 76 FR 21877 - Environmental Management Advisory Board

    Science.gov (United States)

    2011-04-19

    ... DEPARTMENT OF ENERGY Environmental Management Advisory Board AGENCY: Department of Energy. ACTION: Notice of call for nominations for appointment to the Environmental Management Advisory Board. SUMMARY... Environmental Management Advisory Board. DATES: Nominations will be accepted through May 13, 2011. ADDRESSES...

  18. Environmental laws regulating chemicals: Uses of information in decision making under environmental statutes

    Energy Technology Data Exchange (ETDEWEB)

    Gaba, J.M. [Southern Methodist Univ., Dallas, TX (United States)

    1990-12-31

    Three areas are addressed in this paper: generic issues that arise simply in the process of decision-making under environmental statutes; different decision-making standards under various environmental statutes; and efforts to legislate a {open_quotes}safe{close_quotes} or {open_quotes}acceptable{close_quotes} risk from exposure to carcinogenic chemicals.

  19. Idaho CERCLA Disposal Facility Complex Waste Acceptance Criteria

    Energy Technology Data Exchange (ETDEWEB)

    W. Mahlon Heileson

    2006-10-01

    The Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility (ICDF) has been designed to accept CERCLA waste generated within the Idaho National Laboratory. Hazardous, mixed, low-level, and Toxic Substance Control Act waste will be accepted for disposal at the ICDF. The purpose of this document is to provide criteria for the quantities of radioactive and/or hazardous constituents allowable in waste streams designated for disposal at ICDF. This ICDF Complex Waste Acceptance Criteria is divided into four section: (1) ICDF Complex; (2) Landfill; (3) Evaporation Pond: and (4) Staging, Storage, Sizing, and Treatment Facility (SSSTF). The ICDF Complex section contains the compliance details, which are the same for all areas of the ICDF. Corresponding sections contain details specific to the landfill, evaporation pond, and the SSSTF. This document specifies chemical and radiological constituent acceptance criteria for waste that will be disposed of at ICDF. Compliance with the requirements of this document ensures protection of human health and the environment, including the Snake River Plain Aquifer. Waste placed in the ICDF landfill and evaporation pond must not cause groundwater in the Snake River Plain Aquifer to exceed maximum contaminant levels, a hazard index of 1, or 10-4 cumulative risk levels. The defined waste acceptance criteria concentrations are compared to the design inventory concentrations. The purpose of this comparison is to show that there is an acceptable uncertainty margin based on the actual constituent concentrations anticipated for disposal at the ICDF. Implementation of this Waste Acceptance Criteria document will ensure compliance with the Final Report of Decision for the Idaho Nuclear Technology and Engineering Center, Operable Unit 3-13. For waste to be received, it must meet the waste acceptance criteria for the specific disposal/treatment unit (on-Site or off-Site) for which it is destined.

  20. Analysis of the most widely used Building Environmental Assessment methods

    International Nuclear Information System (INIS)

    Gu, Zhenhong; Wennersten, R.; Assefa, G.

    2006-01-01

    Building Environmental Assessment (BEA) is a term used for several methods for environmental assessment of the building environment. Generally, Life Cycle Assessment (LCA) is an important foundation and part of the BEA method, but current BEA methods form more comprehensive tools than LCA. Indicators and weight assignments are the two most important factors characterizing BEA. From the comparison of the three most widely used BEA methods, EcoHomes (BREEAM for residential buildings), LEED-NC and GBTool, it can be seen that BEA methods are shifting from ecological, indicator-based scientific systems to more integrated systems covering ecological, social and economic categories. Being relatively new methods, current BEA systems are far from perfect and are under continuous development. The further development of BEA methods will focus more on non-ecological indicators and how to promote implementation. Most BEA methods are developed based on regional regulations and LCA methods, but they do not attempt to replace these regulations. On the contrary, they try to extend implementation by incentive programmes. There are several ways to enhance BEA in the future: expand the studied scope from design levels to whole life-cycle levels of constructions, enhance international cooperation, accelerate legislation and standardize and develop user-oriented assessment systems

  1. IRP methods for Environmental Impact Statements of utility expansion plans

    International Nuclear Information System (INIS)

    Cavallo, J.D.; Hemphill, R.C.; Veselka, T.D.

    1992-01-01

    Most large electric utilities and a growing number of gas utilities in the United States are using a planning method -- Integrated Resource Planning (IRP) - which incorporates demand-side management (DSM) programs whenever the marginal cost of the DSM programs are lower than the marginal cost of supply-side expansion options. Argonne National Laboratory has applied the IRP method in its socio-economic analysis of an Environmental Impact Statement (EIS) of power marketing for a system of electric utilities in the mountain and western regions of the United States. Applying the IRP methods provides valuable information to the participants in an EIS process involving capacity expansion of an electric or gas utility. The major challenges of applying the IRP method within an EIS are the time consuming and costly task of developing a least cost expansion path for each altemative, the detailed quantification of environmental damages associated with capacity expansion, and the explicit inclusion of societal-impacts to the region

  2. USING FINANCIAL ACCOUNTING METHODS TO FURTHER DEVELOP AND COMMUNICATE ENVIRONMENTAL ACCOUNTING USING EMERGY

    Science.gov (United States)

    The idea that the methods and models of accounting and bookkeeping might be useful in describing, understanding, and managing environmental systems is implicit in the title of H.T. Odum's book, Environmental Accounting: Emergy and Environmental Decision Making. In this paper, I ...

  3. Are We Meeting the Goal of Responsible Environmental Behavior: An Examination of Nature and Environmental Education Center Goals.

    Science.gov (United States)

    Simmons, Deborah A.

    1991-01-01

    Through two surveys of nature and environmental centers throughout the United States, the author compares the centers' expressed goals with the goals of environmental education. These goals were determined by an accepted behavior model that is considered conducive to environmentally responsible behavior. (17 references) (MCO)

  4. Nuclear and nuclear related analytical methods applied in environmental research

    International Nuclear Information System (INIS)

    Popescu, Ion V.; Gheboianu, Anca; Bancuta, Iulian; Cimpoca, G. V; Stihi, Claudia; Radulescu, Cristiana; Oros Calin; Frontasyeva, Marina; Petre, Marian; Dulama, Ioana; Vlaicu, G.

    2010-01-01

    Nuclear Analytical Methods can be used for research activities on environmental studies like water quality assessment, pesticide residues, global climatic change (transboundary), pollution and remediation. Heavy metal pollution is a problem associated with areas of intensive industrial activity. In this work the moss bio monitoring technique was employed to study the atmospheric deposition in Dambovita County Romania. Also, there were used complementary nuclear and atomic analytical methods: Neutron Activation Analysis (NAA), Atomic Absorption Spectrometry (AAS) and Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). These high sensitivity analysis methods were used to determine the chemical composition of some samples of mosses placed in different areas with different pollution industrial sources. The concentrations of Cr, Fe, Mn, Ni and Zn were determined. The concentration of Fe from the same samples was determined using all these methods and we obtained a very good agreement, in statistical limits, which demonstrate the capability of these analytical methods to be applied on a large spectrum of environmental samples with the same results. (authors)

  5. Pregnancy planning and acceptance among Danish pregnant women

    DEFF Research Database (Denmark)

    Rasch, V; Knudsen, L B; Wielandt, H

    2001-01-01

    OBJECTIVE: To study how living conditions influence pregnancy planning and acceptance among Danish women. METHOD: A cross-sectional questionnaire study performed among 3516 pregnant women attending Odense University Hospital, Denmark. The study population consisted of women with spontaneous......-planners with accepting planners and by comparing rejecting planners with rejecting non-planners. The variables studied comprise age, number of children, partner relationship, education, occupation, economic situation and contraceptives. RESULTS: The characteristics of accepting non-planners and accepting planners were...... in accordance and in contrast to those of rejecting planners and in particular of rejecting non-planners. The contraceptive prevalence rate among accepting non-planners was 15%. Among rejecting non-planners the same figure was 51%. CONCLUSION: Accepting non-planners seemed to be in a situation which could...

  6. 40 CFR 205.57-6 - Acceptance and rejection of batches.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Acceptance and rejection of batches. 205.57-6 Section 205.57-6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Medium and Heavy Trucks § 205.57-6...

  7. Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 These test methods provide procedures for stressing photovoltaic modules in simulated temperature and humidity environments. Environmental testing is used to simulate aging of module materials on an accelerated basis. 1.2 Three individual environmental test procedures are defined by these test methods: a thermal cycling procedure, a humidity-freeze cycling procedure, and an extended duration damp heat procedure. Electrical biasing is utilized during the thermal cycling procedure to simulate stresses that are known to occur in field-deployed modules. 1.3 These test methods define mounting methods for modules undergoing environmental testing, and specify parameters that must be recorded and reported. 1.4 These test methods do not establish pass or fail levels. The determination of acceptable or unacceptable results is beyond the scope of these test methods. 1.5 Any of the individual environmental tests may be performed singly, or may be combined into a test sequence with other environmental or non-envir...

  8. Environmental impact of indirect subsidies. Development and application of a policy oriented method

    International Nuclear Information System (INIS)

    Van Beers, C.; Van den Bergh, J.C.J.M.; Oosterhuis, F.; De Moor, A.

    2002-12-01

    The aim of this study is to develop a method for determining the environmental impact of indirect subsidies. The point of departure is a typology of subsidies to cover the large number of different types. The large-scale subsidies will be considered first, on the assumption that these will often have extensive environmental effects. Then, the environmental effects in the Netherlands will be calculated. The restriction to the Netherlands means that no attention is given to the environmental consequences of abolishing subsidies. An earlier study showed that the most extensive indirect subsidies at world and OECD level are mainly in the energy, agriculture and transport sectors. The method is tested by calculating the environmental effects of large-scale subsidies in these three sectors and in the tourism sector.

  9. Acceptability of contraception for men: a review.

    Science.gov (United States)

    Glasier, Anna

    2010-11-01

    Methods of contraception for use by men include condoms, withdrawal and vasectomy. Prevalence of use of a method and continuation rates are indirect measures of acceptability. Worldwide, none of these "male methods" accounts for more than 7% of contraceptive use although uptake varies considerably between countries. Acceptability can be assessed directly by asking about intended (hypothetical) use and assessing satisfaction during/after use. Since they have been around for a very long time, there are very few data of this nature on condoms (as contraceptives rather than for prevention of infection), withdrawal or vasectomy. There are direct data on the acceptability of hormonal methods for men but from relatively small clinical trials which undoubtedly do not represent the real world. Surveys undertaken among the male general public demonstrate that, whatever the setting, at least 25% of men - and in most countries substantially more - would consider using hormonal contraception. Although probably an overestimate of the number of potential users when such a method becomes available, it would appear that hormonal contraceptives for men may have an important place on the contraceptive menu. Despite commonly expressed views to the contrary, most women would trust their male partner to use a hormonal method. Copyright © 2010 Elsevier Inc. All rights reserved.

  10. Generating acceptability of PNRI environmental radioactivity monitoring studies at the former ammunition dump area in Clark special economic zone

    International Nuclear Information System (INIS)

    Garcia, Teofilo Y.

    2002-11-01

    The rejection of the 1991 Treaty of Friendship and Cooperation, which sought to extend the military bases agreement (MBA), paved the way for the Americans to abandon Clark Air Base in Angeles, Pampanga, which had served as an American military base since 1947. The total and immediate pullout of the Americans left the base in an ''as is'' condition and without the benefits of restoration efforts. Various studies and reports have been conducted to determine the presence of hazardous wastes in the former Clark Air Base. The issue of hazardous wastes purportedly left there by the Americans is a continuing and a growing concern particularly of citizens living within its area. The Philippine Nuclear Research Institute (PNRI) In November of 1997 and in April of 1998, the Philippine Nuclear Research Institute PNRI, upon the request of Clark Development Corporation, conducted a thorough radiological monitoring in CSEZ in order to determine the presence of radioactive contamination. Radioactive materials such as cesium-137 and tritium are considered hazardous wastes. Results of monitoring showed that radiation levels in CSEZ were within allowable standards. This means that the workers and residents at the Clark Air Base ( t he base ) are free from dangers of exposure to radiation. Despite the findings, however, reports by the media and environmental NGOs on the presence of hazardous wastes, including radioactive wastes, in Clark have proliferated. This action plan and project (APP) intends to address the issue of environmental radioactivity contamination (if any) within the CSEZ. The APP results are geared towards dispelling the persistent fear of the public in general, and the base stakeholders especially its residents, in particular, regarding the presence of radioactive contamination which results in untoward health effects to those exposed to such contaminants. Thus, the sectoral concern of this APP is to heighten the level of social acceptability by the base

  11. Generating acceptability of PNRI environmental radioactivity monitoring studies at the former ammunition dump area in Clark special economic zone

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Teofilo Y

    2002-11-01

    The rejection of the 1991 Treaty of Friendship and Cooperation, which sought to extend the military bases agreement (MBA), paved the way for the Americans to abandon Clark Air Base in Angeles, Pampanga, which had served as an American military base since 1947. The total and immediate pullout of the Americans left the base in an ''as is'' condition and without the benefits of restoration efforts. Various studies and reports have been conducted to determine the presence of hazardous wastes in the former Clark Air Base. The issue of hazardous wastes purportedly left there by the Americans is a continuing and a growing concern particularly of citizens living within its area. The Philippine Nuclear Research Institute (PNRI) In November of 1997 and in April of 1998, the Philippine Nuclear Research Institute PNRI, upon the request of Clark Development Corporation, conducted a thorough radiological monitoring in CSEZ in order to determine the presence of radioactive contamination. Radioactive materials such as cesium-137 and tritium are considered hazardous wastes. Results of monitoring showed that radiation levels in CSEZ were within allowable standards. This means that the workers and residents at the Clark Air Base ({sup t}he base{sup )} are free from dangers of exposure to radiation. Despite the findings, however, reports by the media and environmental NGOs on the presence of hazardous wastes, including radioactive wastes, in Clark have proliferated. This action plan and project (APP) intends to address the issue of environmental radioactivity contamination (if any) within the CSEZ. The APP results are geared towards dispelling the persistent fear of the public in general, and the base stakeholders especially its residents, in particular, regarding the presence of radioactive contamination which results in untoward health effects to those exposed to such contaminants. Thus, the sectoral concern of this APP is to heighten the level of social acceptability by the base

  12. Bioremediation, regulatory agencies and public acceptance of this technology

    International Nuclear Information System (INIS)

    Westlake, D. W. S.

    1997-01-01

    The technology of bioremediation, i.e. the utilization of microorganisms to degrade environmental pollutants, the dangers and consequences inherent in the large-scale use of microbial organisms in such processes, and the role of regulatory agencies in the utilization and exploitation of bioremediation technologies, were discussed. Factors influencing public acceptance of bioremediation as a satisfactory tool for cleaning up the environment vis-a-vis other existing and potential rehabilitation techniques were also reviewed. The ambiguity of regulatory agencies in the matter of bioremediation was noted. For example, there are many regulatory hurdles relative to the testing, use and approval of transgenic microorganisms for use in bioremediation. On the other hand, the use and release of engineered plants is considered merely another form of hybrid and their endorsement is proceeding rapidly. With regard to public acceptance, the author considered bioremediation technology as too recent, with not enough successful applications to attract public attention. Although the evidence suggests that bioremediation is environmentally safe, the efficacy, reliability and predictability of the various technologies have yet to be demonstrated. 25 refs

  13. Mapping urban environmental noise: a land use regression method.

    Science.gov (United States)

    Xie, Dan; Liu, Yi; Chen, Jining

    2011-09-01

    Forecasting and preventing urban noise pollution are major challenges in urban environmental management. Most existing efforts, including experiment-based models, statistical models, and noise mapping, however, have limited capacity to explain the association between urban growth and corresponding noise change. Therefore, these conventional methods can hardly forecast urban noise at a given outlook of development layout. This paper, for the first time, introduces a land use regression method, which has been applied for simulating urban air quality for a decade, to construct an urban noise model (LUNOS) in Dalian Municipality, Northwest China. The LUNOS model describes noise as a dependent variable of surrounding various land areas via a regressive function. The results suggest that a linear model performs better in fitting monitoring data, and there is no significant difference of the LUNOS's outputs when applied to different spatial scales. As the LUNOS facilitates a better understanding of the association between land use and urban environmental noise in comparison to conventional methods, it can be regarded as a promising tool for noise prediction for planning purposes and aid smart decision-making.

  14. Environmental behaviour of crop protection chemicals. Proceedings of an international symposium

    International Nuclear Information System (INIS)

    1997-01-01

    Pesticides are an integral component of agricultural systems throughout the world. It is generally accepted that this will continue for the foreseeable future if production of food of acceptable quality is to increase. However, pesticide use has costs as well as benefits. Concerning the environment, information must be provided before a product is registered in order to provide assurance that it can be used without unacceptable hazard to non-target organisms. In addition, post-registration surveillance and monitoring studies are necessary to check that the fate and environmental effects of pesticides under field conditions are consistent with predictions. Much of the data are generated using radioisotopes and other nuclear or related methods that can be applied in studies related to the fate and effects of pesticides in the various environmental compartments (soil, water and air), and in terrestrial (agricultural and non-agricultural) and marine ecosystems. For a variety of reasons, developing countries often have to rely on data generated elsewhere in order to assess the acceptability of a compound, particularly if it is off-patent. This Symposium was organized to examine the circumstances under which extrapolation from one environment to another is valid on the basis of data generated under comparable conditions. It also considered ways in which relatively simple methods can be used to verify the field applicability of data obtained under sophisticated experimental conditions. Refs, figs, tabs

  15. Conference on wind power development in the face of landscape and local project acceptability challenges

    International Nuclear Information System (INIS)

    Victoire Lejzerzon; Sauron, Claire; Villot, Marie; Ratzbor, Guenter; Tausch, Christian; Cagneaux, Bertrand; Jouneau, Agathe; Stemmer, Boris; Huebner, Gundula; Orozco-Souel, Paola; Lhermitte, Charles; Ferus, Elisabeth; Benezech, Philippe; Gunzelmann, Thomas

    2015-01-01

    The French-German office for Renewable energies (OFAEnR) organised a conference on n wind power development in the face of landscape and local project acceptability challenges. In the framework of this French-German exchange of experience, participants addressed the following points: the conciliation between landscape protection and wind power development, the definition of landscape environmental quality criteria, the needs and usages of the departments in charge of the treatment of landscape studies in France, the socio-psychological approach of the local acceptability of wind farm projects, the re-powering tool for the improvement of the wind farm integration in the landscape, and the conciliation between the monuments maintenance and wind power development. This document brings together the available presentations (slides) made during this event: 1 - Conciliating landscape protection and wind power development goals in France (Marie Villot); 2 - Wind turbines: Conflicts between development goals, landscape and acceptance - Perception and criteria (Guenter Ratzbor); 3 - Bayern's wind power atlas: a planning tool which takes into account the landscape aspects (Christian Tausch); 4 - Landscape assessment in wind farms projects: what and how to do in French administrative procedures? (Bertrand Cagneaux); 5 - Methods for evaluation of landscape for wind farms projects - A French project developer's feedback (Agathe Jouneau); 6 - Landscape Assessment: Methods from German Landscape Practice (Boris Stemmer); 7 - Acceptance of Wind Turbines - Social Psychological Research (Gundula Huebner); 8 - Local consultation: who to involve, when and how? (Paola Orozco-Souel); 9 - Local acceptability: what dialogue concepts and strategies, and how to manage wind energy objection (Charles Lhermitte); 10 - Re-powering and landscape: chances and limits (Elisabeth Ferus); 11 - Wind power and cultural heritage: consultation and dialogue to succeed (Philippe Benezech); 12

  16. Methods for Evaluating the Biodegradability of Environmentally Degradable Polymers

    NARCIS (Netherlands)

    Zee, van der M.

    2014-01-01

    This chapter presents an overview of the current knowledge on experimental methods for monitoring the biodegradability of polymeric materials. The focus is, in particular, on the biodegradation of materials under environmental conditions. Examples of in vivo degradation of polymers used in

  17. Environmental issues

    International Nuclear Information System (INIS)

    Grove-White, Robin

    1985-01-01

    There is still very little official acceptance that environmental factors will impose major constraints on the development of energy supply options in the United Kingdom in the future. This paper argues that such an acceptance is needed urgently and should begin to affect governmental policies immediately. UK energy policy ought to be to intensify energy efficiency and conservation throughout the economy and hence reduce the need to expand new supply sources. The general energy requirements in the UK are first considered. Problems of energy supply expansion, particularly nuclear power and coal are considered. Resolution of the problems identified in the UK political and administrative context is discussed. Then the environmental aspects are considered. A comment on the paper follows and raises two questions about market-based energy policy; does it preclude intervention to promote economic efficiency in the use of energy and, does it lead to economic efficiency. (U.K.)

  18. Does Knowledge Contribute to the Acceptance of Demand Response?

    Directory of Open Access Journals (Sweden)

    Salla Annala

    2014-03-01

    Full Text Available More flexible demand side would benefit the electricity markets, networks and sustainable power generation in many ways. The success of demand response programs, however, relies on consumer acceptance. This paper reviews previous studies about acceptability of different kinds of residential demand response programs. Furthermore, it discusses whether consumers who are more aware of the principles and benefits of demand response have more positive attitudes towards demand response programs. The results of the literature review and two survey studies suggest that price and security of supply are currently bigger motives to change consumption behaviour than environmental issues and that the savings expected to trigger any action (and to lead to lasting change in behaviour may be relatively high. Therefore, the framing of demand response programs goals may affect the acceptance. Additionally, consumers seem to prefer simple price structures that remain constant for a long time to more dynamic options.

  19. The importance of male partner involvement for women's acceptability and adherence to female-initiated HIV prevention methods in Zimbabwe.

    Science.gov (United States)

    Montgomery, Elizabeth T; van der Straten, Ariane; Chidanyika, Agnes; Chipato, Tsungai; Jaffar, Shabbar; Padian, Nancy

    2011-07-01

    Enlisting male partner involvement is perceived as an important component of women's successful uptake of female-initiated HIV prevention methods. We conducted a longitudinal study among a cohort of 955 Zimbabwean women participating in a clinical trial of the effectiveness of a female-initiated HIV prevention method (the diaphragm and lubricant gel) to: (a) describe the extent to which women involved their male partners in the decision to use the study products, and (b) measure the effect perceived male partner support had on their acceptability and consistent use of these methods. Reported levels of male partner involvement in discussions and decisions regarding: joining the study, study activities, the outcome of HIV/STI test results, and product use were very high. In multivariate analyses, regular disclosure of study product use and partner approval for the diaphragm and gel were significantly associated with women's acceptability and consistent use of the products; an essential component for determining efficacy of investigational prevention methods. These results support the need for more sophisticated measurement of how couples interact to make decisions that impact study participation and investigational product use as well as more rigorous adaptations and evaluations of existing strategies to involve male partners in female-initiated HIV prevention trials.

  20. Opt-out as an acceptable method of obtaining consent in medical research: a short report.

    LENUS (Irish Health Repository)

    Vellinga, Akke

    2011-04-06

    Abstract Background A prospective cohort study was set up to investigate a possible association between antibiotic prescribing and antibiotic resistance of E. coli urinary tract infection in the community. Participation of patients with urinary tract infection was obtained through an opt-out methodology. This short paper reports on the acceptability of the opt-out recruitment approach. Methods Participating practices (22) were requested to send a urine sample from all patients presenting with symptoms of urinary tract infection. Upon receipt of the sample in the laboratory, a letter explaining the study, an opt-out form and a freepost envelope were sent to all adult patients. A website with additional information and including an \\'opt-out\\' button was set up for the study. Results A total of 1362 urine samples were submitted by the 22 participating practices representing 1178 adult patients of whom 193 actively responded to the letter: 142 opted out by letter, 15 through the website, 2 by phone and 12 sent the letter back without indication, making a total of 171 patients or 14.5% opt-out; the remaining 22 patients (1.9%) explicitly opted in. The total group consisted of 80% women and the mean age was 50.9 years (sd 20.8). No significant differences were found between patients who participated and those who opted out in terms of age, gender or whether the urine sample was positive or not. Conclusions Overall the opt-out method was well received and participation in the study reached 85.5%. The low number of complaints (2) indicates that this is a generally acceptable method of patient recruitment. The 14.5% opt-out shows that it effectively empowers patients to decline participation. The similarity between patients opting out and the rest of the patients is reassuring for extrapolation of the results of the study.

  1. Compatibility of global environmental assessment methods of buildings with an Egyptian energy code

    Directory of Open Access Journals (Sweden)

    Amal Kamal Mohamed Shamseldin

    2017-04-01

    Full Text Available Several environmental assessment methods of buildings had emerged over the world to set environmental classifications for buildings, such as the American method “Leadership in Energy and Environmental Design” (LEED the most widespread one. Several countries decided to put their own assessment methods to catch up with the previous orientation, such as Egypt. The main goal of putting the Egyptian method was to impose the voluntary local energy efficiency codes. Through a local survey, it was clearly noted that many of the construction makers in Egypt do not even know the local method, and whom are interested in the environmental assessment of buildings seek to apply LEED rather than anything else. Therefore, several questions appear about the American method compatibility with the Egyptian energy codes – that contain the most exact characteristics and requirements and give the outmost credible energy efficiency results for buildings in Egypt-, and the possibility of finding another global method that gives closer results to those of the Egyptian codes, especially with the great variety of energy efficiency measurement approaches used among the different assessment methods. So, the researcher is trying to find the compatibility of using non-local assessment methods with the local energy efficiency codes. Thus, if the results are not compatible, the Egyptian government should take several steps to increase the local building sector awareness of the Egyptian method to benefit these codes, and it should begin to enforce it within the building permits after a proper guidance and feedback.

  2. Environmental and economic assessment methods for waste management decision-support: possibilities and limitations.

    Science.gov (United States)

    Finnveden, Göran; Björklund, Anna; Moberg, Asa; Ekvall, Tomas

    2007-06-01

    A large number of methods and approaches that can be used for supporting waste management decisions at different levels in society have been developed. In this paper an overview of methods is provided and preliminary guidelines for the choice of methods are presented. The methods introduced include: Environmental Impact Assessment, Strategic Environmental Assessment, Life Cycle Assessment, Cost-Benefit Analysis, Cost-effectiveness Analysis, Life-cycle Costing, Risk Assessment, Material Flow Accounting, Substance Flow Analysis, Energy Analysis, Exergy Analysis, Entropy Analysis, Environmental Management Systems, and Environmental Auditing. The characteristics used are the types of impacts included, the objects under study and whether the method is procedural or analytical. The different methods can be described as systems analysis methods. Waste management systems thinking is receiving increasing attention. This is, for example, evidenced by the suggested thematic strategy on waste by the European Commission where life-cycle analysis and life-cycle thinking get prominent positions. Indeed, life-cycle analyses have been shown to provide policy-relevant and consistent results. However, it is also clear that the studies will always be open to criticism since they are simplifications of reality and include uncertainties. This is something all systems analysis methods have in common. Assumptions can be challenged and it may be difficult to generalize from case studies to policies. This suggests that if decisions are going to be made, they are likely to be made on a less than perfect basis.

  3. Does green consumerism increase the acceptance of wind power?

    DEFF Research Database (Denmark)

    Thøgersen, John; Noblet, Caroline

    2012-01-01

    sustainability,referred to as ‘‘catalytic’’ or ‘‘wedge’’ behaviours. Despite the obvious need for innovative approaches to promote important pro-environmental behaviour, and sound theoretical backing for such concepts, there is a lack of research testing the key propositions of this approach. In a survey study......In this paper,we discuss what might be termed an action-based learning approach to promoting important pro-environmentalactions,such as support for or acceptance of environmental policy.Such an approach involves promoting simple and easy behaviours as entry points for more radical steps towards...

  4. Cone penetrometer moisture probe acceptance test report

    International Nuclear Information System (INIS)

    Barnes, G.A.

    1996-01-01

    This Acceptance Test Report (ATR) documents the results of WHC-SD-WM-ATP-146 (Prototype Cone Penetrometer Moisture Probe Acceptance Test Procedure) and WHC-SD-WM-ATP-145 (Cone Penetrometer Moisture Probe Acceptance Test Procedure). The master copy of WHC-SD-WM-ATP-145 can be found in Appendix A and the master copy of WHC-SD-WM-ATP-146 can be found in Appendix B. Also included with this report is a matrix showing design criteria of the cone penetrometer moisture probe and the verification method used (Appendix C)

  5. Environmental and economic comparisons of manure application methods in farming systems.

    Science.gov (United States)

    Rotz, C A; Kleinman, P J A; Dell, C J; Veith, T L; Beegle, D B

    2011-01-01

    Alternative methods for applying livestock manure to no-till soils involve environmental and economic trade-offs. A process-level farm simulation model (Integrated Farm System Model) was used to evaluate methods for applying liquid dairy (Bos taurus L.) and swine (Sus scrofa L.) manure, including no application, broadcast spreading with and without incorporation by tillage, band application with soil aeration, and shallow disk injection. The model predicted ammonia emissions, nitrate leaching, and phosphorus (P) runoff losses similar to those measured over 4 yr of field trials. Each application method was simulated over 25 yr of weather on three Pennsylvania farms. On a swine and cow-calf beef operation under grass production, shallow disk injection increased profit by $340 yr(-1) while reducing ammonia nitrogen and soluble P losses by 48 and 70%, respectively. On a corn (Zea mays L.)-and-grass-based grazing dairy farm, shallow disk injection reduced ammonia loss by 21% and soluble P loss by 76% with little impact on farm profit. Incorporation by tillage and band application with aeration provided less environmental benefit with a net decrease in farm profit. On a large corn-and-alfalfa (Medicago sativa L.)-based dairy farm where manure nutrients were available in excess of crop needs, incorporation methods were not economically beneficial, but they provided environmental benefits with relatively low annual net costs ($13 to $18 cow). In all farming systems, shallow disk injection provided the greatest environmental benefit at the least cost or greatest profit for the producer. With these results, producers are better informed when selecting manure application equipment.

  6. Environmental dose-assessment methods for normal operations at DOE nuclear sites

    International Nuclear Information System (INIS)

    Strenge, D.L.; Kennedy, W.E. Jr.; Corley, J.P.

    1982-09-01

    Methods for assessing public exposure to radiation from normal operations at DOE facilities are reviewed in this report. The report includes a discussion of environmental doses to be calculated, a review of currently available environmental pathway models and a set of recommended models for use when environmental pathway modeling is necessary. Currently available models reviewed include those used by DOE contractors, the Environmental Protection Agency (EPA), the Nuclear Regulatory Commission (NRC), and other organizations involved in environmental assessments. General modeling areas considered for routine releases are atmospheric transport, airborne pathways, waterborne pathways, direct exposure to penetrating radiation, and internal dosimetry. The pathway models discussed in this report are applicable to long-term (annual) uniform releases to the environment: they do not apply to acute releases resulting from accidents or emergency situations

  7. An Optimized Method for Quantification of Pathogenic Leptospira in Environmental Water Samples.

    Science.gov (United States)

    Riediger, Irina N; Hoffmaster, Alex R; Casanovas-Massana, Arnau; Biondo, Alexander W; Ko, Albert I; Stoddard, Robyn A

    2016-01-01

    Leptospirosis is a zoonotic disease usually acquired by contact with water contaminated with urine of infected animals. However, few molecular methods have been used to monitor or quantify pathogenic Leptospira in environmental water samples. Here we optimized a DNA extraction method for the quantification of leptospires using a previously described Taqman-based qPCR method targeting lipL32, a gene unique to and highly conserved in pathogenic Leptospira. QIAamp DNA mini, MO BIO PowerWater DNA and PowerSoil DNA Isolation kits were evaluated to extract DNA from sewage, pond, river and ultrapure water samples spiked with leptospires. Performance of each kit varied with sample type. Sample processing methods were further evaluated and optimized using the PowerSoil DNA kit due to its performance on turbid water samples and reproducibility. Centrifugation speeds, water volumes and use of Escherichia coli as a carrier were compared to improve DNA recovery. All matrices showed a strong linearity in a range of concentrations from 106 to 10° leptospires/mL and lower limits of detection ranging from Leptospira in environmental waters (river, pond and sewage) which consists of the concentration of 40 mL samples by centrifugation at 15,000×g for 20 minutes at 4°C, followed by DNA extraction with the PowerSoil DNA Isolation kit. Although the method described herein needs to be validated in environmental studies, it potentially provides the opportunity for effective, timely and sensitive assessment of environmental leptospiral burden.

  8. Environmental applications of manometric respirometric methods

    Energy Technology Data Exchange (ETDEWEB)

    Roppola, K.

    2009-07-01

    In this work a manometric respirometric measuring system was applied to practical environmental cases related to wastewater management and biodegradation studies of oil-contaminated soils and materials used in landfill structures. Pollution of groundwater, surface water and soils is a worldwide problem. Therefore, tests simulating the biodegradation behaviour of organic compounds in water media and soils have become increasingly important. Respirometric methods provide direct measurement of the oxygen consumed by micro-organisms in biodegradation processes from an air or oxygen-enriched environment in a closed vessel. Biochemical oxygen demand (BOD) is a crucial environmental parameter used to measure the quality of water and treatment results in wastewater. Generally, BOD is measured with standardised methods, which are usually time-consuming as well as laborious. In this work the manometric respirometric test was compared with conventional BOD tests by determining the BOD of pulp and paper mills as well as domestic wastewater samples. The effect of different factors such as type, amount and pre-treatment of inoculum and the effect of dilution of a sample on the BOD values were also tested. A right dilution was noticed to be the most significant factor affecting the BOD values of the industrial wastewater samples. The mathematic estimation of the BOD7 values from the respirometric data was proved to work reliably after a 2-3 day incubation period. Characterisation of organic fractions of the pulp and paper mill wastewater was carried out with methods including filtration, long term BOD measurements and COD analyses. The most significant observation in characterisation analyses was that a remarkable part of the detected oxygen demand was consumed for the biotransformation of biodegradable fractions into new inert decomposition products, not only for mineralisation of the biodegradable COD fraction. Biodegradation behaviour of the peat samples with different

  9. A proposed model of factors influencing hydrogen fuel cell vehicle acceptance

    Science.gov (United States)

    Imanina, N. H. Noor; Kwe Lu, Tan; Fadhilah, A. R.

    2016-03-01

    Issues such as environmental problem and energy insecurity keep worsening as a result of energy use from household to huge industries including automotive industry. Recently, a new type of zero emission vehicle, hydrogen fuel cell vehicle (HFCV) has received attention. Although there are argues on the feasibility of hydrogen as the future fuel, there is another important issue, which is the acceptance of HFCV. The study of technology acceptance in the early stage is a vital key for a successful introduction and penetration of a technology. This paper proposes a model of factors influencing green vehicle acceptance, specifically HFCV. This model is built base on two technology acceptance theories and other empirical studies of vehicle acceptance. It aims to provide a base for finding the key factors influencing new sustainable energy fuelled vehicle, HFCV acceptance which is achieved by explaining intention to accept HFCV. Intention is influenced by attitude, subjective norm and perceived behavioural control from Theory of Planned Behaviour and personal norm from Norm Activation Theory. In the framework, attitude is influenced by perceptions of benefits and risks, and social trust. Perceived behavioural control is influenced by government interventions. Personal norm is influenced by outcome efficacy and problem awareness.

  10. College Student Invulnerability Beliefs and HIV Vaccine Acceptability

    Science.gov (United States)

    Ravert, Russell D.; Zimet, Gregory D.

    2009-01-01

    Objective: To examine behavioral history, beliefs, and vaccine characteristics as predictors of HIV vaccine acceptability. Methods: Two hundred forty-five US under graduates were surveyed regarding their sexual history, risk beliefs, and likelihood of accepting hypothetical HIV vaccines. Results: Multivariate regression analysis indicated that…

  11. The Oil Point Method - A tool for indicative environmental evaluation in material and process selection

    DEFF Research Database (Denmark)

    Bey, Niki

    2000-01-01

    to three essential assessment steps, the method enables rough environmental evaluations and supports in this way material- and process-related decision-making in the early stages of design. In its overall structure, the Oil Point Method is related to Life Cycle Assessment - except for two main differences...... of environmental evaluation and only approximate information about the product and its life cycle. This dissertation addresses this challenge in presenting a method, which is tailored to these requirements of designers - the Oil Point Method (OPM). In providing environmental key information and confining itself...

  12. A study on the social risk comparison for various power systems: focusing on the social acceptance

    International Nuclear Information System (INIS)

    Jung, Young Soo; Kim, Young Pyung; Lee, Jae Eun

    2007-02-01

    The objective of this study is to develop measurement indices for social risk acceptance of various power systems(nuclear, coal, oil, LNG, hydro, wind, solar) and compare them empirically. In order to measure social risk acceptance of various power systems, four measurement fields and twelve measurement indices were developed. Measurement areas contains rationality, emotion, trust, communication. Each measurement field has two or three measurement indices. Rationality field has indices of amount of knowledge, recognition of technological utility, risk controllability. Emotion field has indices of experiences, risk recognition. Trust field has indices of openness, sincerity, willingness of sharing knowledge and experiences. Communication field has indices of scientist's roll, media's roll, public relations. Based on these measurement field and indices, this study made questionnaire and surveyed citizens to compare deciding factors of social acceptance on risk of various power systems. Questionnaire respondents were sampled from six different groups, including power system specialists, highschool students, university students, general citizen, professors and environmental NGOs. The methodologies used to analyze the deciding factors of social acceptance on risk of various power systems were frequency analysis, cross-tab analysis, t-test and ANOVA analysis. AHP method was used to analyze power system specialists' perception on relative severance and priority among measurement fields and indices

  13. A study on the social risk comparison for various power systems: focusing on the social acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Young Soo [Myongji Univ., Seoul (Korea, Republic of); Kim, Young Pyung [Korea Univ, Seoul (Korea, Republic of); Lee, Jae Eun [Chungbuk Nat. Univ., Cheongju (Korea, Republic of)

    2007-02-15

    The objective of this study is to develop measurement indices for social risk acceptance of various power systems(nuclear, coal, oil, LNG, hydro, wind, solar) and compare them empirically. In order to measure social risk acceptance of various power systems, four measurement fields and twelve measurement indices were developed. Measurement areas contains rationality, emotion, trust, communication. Each measurement field has two or three measurement indices. Rationality field has indices of amount of knowledge, recognition of technological utility, risk controllability. Emotion field has indices of experiences, risk recognition. Trust field has indices of openness, sincerity, willingness of sharing knowledge and experiences. Communication field has indices of scientist's roll, media's roll, public relations. Based on these measurement field and indices, this study made questionnaire and surveyed citizens to compare deciding factors of social acceptance on risk of various power systems. Questionnaire respondents were sampled from six different groups, including power system specialists, highschool students, university students, general citizen, professors and environmental NGOs. The methodologies used to analyze the deciding factors of social acceptance on risk of various power systems were frequency analysis, cross-tab analysis, t-test and ANOVA analysis. AHP method was used to analyze power system specialists' perception on relative severance and priority among measurement fields and indices.

  14. Acceptability of multipurpose human papillomavirus vaccines among providers and mothers of adolescent girls: A mixed-methods study in five countries

    Directory of Open Access Journals (Sweden)

    Nadja A. Vielot

    2017-06-01

    Full Text Available Introduction: Multipurpose vaccines (MPVs could be formulated to prevent multiple sexually transmitted infections simultaneously. Little is known about acceptability of MPVs among vaccine health care providers (HCPs or mothers of adolescent girls. Methods: 151 adolescent vaccine providers and 118 mothers of adolescent girls aged 9–14 were recruited from five geographically-diverse countries: Argentina, Malaysia, South Africa, South Korea, and Spain. We assessed providers’ preferences for single-purpose human papillomavirus (HPV vaccine versus MPVs (including HPV+herpes simplex virus (HSV−2, HPV+HIV, or HPV+HSV-2+HIV via quantitative surveys. Maternal MPV attitudes were assessed in four focus group discussions (FGDs in each country. Results: Most providers preferred MPVs over single-purpose HPV vaccination, with preference ranging from 61% in Malaysia to 96% in South Africa. HPV+HSV-2+HIV was the most preferred MPV formulation (56–82%. Overall, 53% of the mothers preferred MPVs over single-purpose HPV vaccines, with strongest support in South Africa (90% and lowest support in South Korea (29%. Convenience and trust in the health care system were commonly-cited reasons for MPV acceptability. Safety and efficacy concerns were common barriers to accepting MPVs, though specific concerns differed by country. Across FGDs, additional safety and efficacy information on MPVs were requested, particularly from trusted sources like HCPs. Conclusions: Though maternal acceptability of MPVs varied by country, MPV acceptability would be enhanced by having HCPs provide parents with additional MPV vaccine safety and efficacy information. While most providers preferred MPVs, future health behavior research should identify acceptability barriers, and targeted provider interventions should equip providers to improve vaccination discussions with parents. Keywords: Vaccines, Acceptability, Multipurpose, Human papillomavirus, Sexually transmitted

  15. Importance of perceived naturalness for acceptance of food additives and cultured meat.

    Science.gov (United States)

    Siegrist, Michael; Sütterlin, Bernadette

    2017-06-01

    Four experiments examined some factors influencing the perceived naturalness of food products and their biasing effect on risk perception. The results of Experiment 1a showed that three food additives displaying their respective E-numbers (i.e., codes for food additives in the European Union and Switzerland) decreased perceived naturalness. Experiment 1b demonstrated that mentioning possible health effects decreased the perceived naturalness of a plant-based food additive. This experiment further showed that it would not matter for perceived naturalness whether the food was synthetic or nature-identical. Moreover, the results of Experiments 2 and 3 suggested that the same risk associated with meat consumption was much more acceptable for traditionally produced meat compared with in-vitro meat. Experiment 3 further indicated that the perceived naturalness of the meat (i.e., traditional or cultured meat) had a full mediation effect on participants' evaluation of the acceptability of the risk of colon cancer associated with the meat consumption. Even if the new production method (i.e., cultured meat) was more environmentally friendly and less harmful to animals, the perceived lack of naturalness might reduce the acceptability of the risk associated with such a product. The present study provides evidence that consumers rely on symbolic information when evaluating foods, which may lead to biased judgments and decisions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. The environmental impact of coal technology: Politics and methods of achieving an international convention to protect the earth's atmosphere

    International Nuclear Information System (INIS)

    1992-01-01

    Particular attention will be paid to the following points during the international Round Table discussions: Technology transfer and political opportunities for the environmentally-compatible use of coal in developing and transitional countries who rely on coal to meet their energy needs. Supporting this challenge for the international community of coal-based energy conservation in these countries, particularly through development aid. To increasingly accept our collective responsibility for energy considerations and environmental effects, based on a better understanding of the countries' differing limits and obligations in achieving the goal of a convention to protect the earth's atmosphere. (orig.) [de

  17. A comparative analysis of environmental impacts of non-fossil energy production methods

    Directory of Open Access Journals (Sweden)

    Kiss Adam

    2014-01-01

    Full Text Available The widespread proliferation of other then fossil based energy production methods is a development, which inevitable comes in the next future. It is proven that the photovoltaic conversion or the use of heat of Sun radiation, the water energy, the utilization of the wind, the biomass production, the use of geothermal energy can all produce big amounts of energy for human use. In addition, the nuclear energy from fission is a technology, which has already long history and is widely used. However, these all, like the fossil energy sources, have great impacts on the environment. Nevertheless, the comparison of the environmental effects of these alternative energy sources is not easy. The effects are of considerable different natures and their spatial and the time distributions vary on large scales. The present work overviews the principles and the methodological prerequisites of performing a comparative analysis of the environmental effects for the non-fossil energy production methods. After establishing the basic principles for comparison, we shall go through all the non-fossil energy sources and analyze the most important environmental impacts of each energy production method. In conclusion, the comparison of the environmental effects will be discussed.

  18. A comparative analysis of environmental impacts of non-fossil energy production methods

    Science.gov (United States)

    Kiss, Adam

    2014-12-01

    The widespread proliferation of other then fossil based energy production methods is a development, which inevitable comes in the next future. It is proven that the photovoltaic conversion or the use of heat of Sun radiation, the water energy, the utilization of the wind, the biomass production, the use of geothermal energy can all produce big amounts of energy for human use. In addition, the nuclear energy from fission is a technology, which has already long history and is widely used. However, these all, like the fossil energy sources, have great impacts on the environment. Nevertheless, the comparison of the environmental effects of these alternative energy sources is not easy. The effects are of considerable different natures and their spatial and the time distributions vary on large scales. The present work overviews the principles and the methodological prerequisites of performing a comparative analysis of the environmental effects for the non-fossil energy production methods. After establishing the basic principles for comparison, we shall go through all the non-fossil energy sources and analyze the most important environmental impacts of each energy production method. In conclusion, the comparison of the environmental effects will be discussed.

  19. On - Site Assessment Methods For Environmental Radioactivity

    International Nuclear Information System (INIS)

    Petrinec, B.; Babic, D.; Bituh, T.

    2015-01-01

    A method for the rapid determination of radioactivity in cases of release into the environment as well as in cases of nuclear/radiological accidents is described. These measurements would enable a direct risk assessment for humans and biota, without any sampling and at a considerably larger number of locations than in previous studies. Thus obtained, the substantially expanded dataset is expected to shed more light on the properties of environmental radioactivity both in the region studied and in other similar areas. Field measurements will be performed and samples of soil and biota will be collected in order to compare field results with laboratory measurements. Once the method has been validated, previously unexplored locations will be included in the study. Our measurements at numerous locations will also provide control values for comparison in cases of any unplanned or accidental radiological event. An assessment of the possible effects of radionuclide concentrations on the human food chain and biota will be performed within the appropriate models used worldwide exactly for this purpose. In this way, the project should contribute to regional, European, and global efforts towards understanding the radiological impact on ecosystems. Field measurements will also address certain issues in the environmental metrology of radioactive substances, e.g., simultaneous determination of activity concentrations and related dose rates. This will serve as a tool for rapid risk assessment in emergency situations. (author).

  20. Methods and Metrics for Evaluating Environmental Dredging ...

    Science.gov (United States)

    This report documents the objectives, approach, methodologies, results, and interpretation of a collaborative research study conducted by the National Risk Management Research Laboratory (NRMRL) and the National Exposure Research laboratory (NERL) of the U.S. Environmental Protection Agency’s (U.S. EPA’s) Office of Research and Development (ORD) and the U.S. EPA’s Great Lakes National Program Office (GLNPO). The objectives of the research study were to: 1) evaluate remedy effectiveness of environmental dredging as applied to contaminated sediments in the Ashtabula River in northeastern Ohio, and 2) monitor the recovery of the surrounding ecosystem. The project was carried out over 6 years from 2006 through 2011 and consisted of the development and evaluation of methods and approaches to assess river and ecosystem conditions prior to dredging (2006), during dredging (2006 and 2007), and following dredging, both short term (2008) and long term (2009-2011). This project report summarizes and interprets the results of this 6-year study to develop and assess methods for monitoring pollutant fate and transport and ecosystem recovery through the use of biological, chemical, and physical lines of evidence (LOEs) such as: 1) comprehensive sampling of and chemical analysis of contaminants in surface, suspended, and historic sediments; 2) extensive grab and multi-level real time water sampling and analysis of contaminants in the water column; 3) sampling, chemi

  1. The fairness, predictive validity and acceptability of multiple mini interview in an internationally diverse student population- a mixed methods study

    OpenAIRE

    Kelly, Maureen E.; Dowell, Jon; Husbands, Adrian; Newell, John; O'Flynn, Siun; Kropmans, Thomas; Dunne, Fidelma P.; Murphy, Andrew W.

    2014-01-01

    Background International medical students, those attending medical school outside of their country of citizenship, account for a growing proportion of medical undergraduates worldwide. This study aimed to establish the fairness, predictive validity and acceptability of Multiple Mini Interview (MMI) in an internationally diverse student population. Methods This was an explanatory sequential, mixed methods study. All students in First Year Medicine, National University of Ireland Galway 2012 we...

  2. Acceptance of dying: a discourse analysis of palliative care literature.

    Science.gov (United States)

    Zimmermann, Camilla

    2012-07-01

    The subject of death denial in the West has been examined extensively in the sociological literature. However, there has not been a similar examination of its "opposite", the acceptance of death. In this study, I use the qualitative method of discourse analysis to examine the use of the term "acceptance" of dying in the palliative care literature from 1970 to 2001. A Medline search was performed by combining the text words "accept or acceptance" with the subject headings "terminal care or palliative care or hospice care", and restricting the search to English language articles in clinical journals discussing acceptance of death in adults. The 40 articles were coded and analysed using a critical discourse analysis method. This paper focuses on the theme of acceptance as integral to palliative care, which had subthemes of acceptance as a goal of care, personal acceptance of healthcare workers, and acceptance as a facilitator of care. For patients and families, death acceptance is a goal that they can be helped to attain; for palliative care staff, acceptance of dying is a personal quality that is a precondition for effective practice. Acceptance not only facilitates the dying process for the patient and family, but also renders care easier. The analysis investigates the intertextuality of these themes with each other and with previous texts. From a Foucauldian perspective, I suggest that the discourse on acceptance of dying represents a productive power, which disciplines patients through apparent psychological and spiritual gratification, and encourages participation in a certain way to die. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. Acceptability of self-collection sampling for HPV-DNA testing in low-resource settings: a mixed methods approach.

    Science.gov (United States)

    Bansil, Pooja; Wittet, Scott; Lim, Jeanette L; Winkler, Jennifer L; Paul, Proma; Jeronimo, Jose

    2014-06-12

    Vaginal self-sampling with HPV-DNA tests is a promising primary screening method for cervical cancer. However, women's experiences, concerns and the acceptability of such tests in low-resource settings remain unknown. In India, Nicaragua, and Uganda, a mixed-method design was used to collect data from surveys (N = 3,863), qualitative interviews (N = 72; 20 providers and 52 women) and focus groups (N = 30 women) on women's and providers' experiences with self-sampling, women's opinions of sampling at home, and their future needs. Among surveyed women, 90% provided a self- collected sample. Of these, 75% reported it was easy, although 52% were initially concerned about hurting themselves and 24% were worried about not getting a good sample. Most surveyed women preferred self-sampling (78%). However it was not clear if they responded to the privacy of self-sampling or the convenience of avoiding a pelvic examination, or both. In follow-up interviews, most women reported that they didn't mind self-sampling, but many preferred to have a provider collect the vaginal sample. Most women also preferred clinic-based screening (as opposed to home-based self-sampling), because the sample could be collected by a provider, women could receive treatment if needed, and the clinic was sanitary and provided privacy. Self-sampling acceptability was higher when providers prepared women through education, allowed women to examine the collection brush, and were present during the self-collection process. Among survey respondents, aids that would facilitate self-sampling in the future were: staff help (53%), additional images in the illustrated instructions (31%), and a chance to practice beforehand with a doll/model (26%). Self-and vaginal-sampling are widely acceptable among women in low-resource settings. Providers have a unique opportunity to educate and prepare women for self-sampling and be flexible in accommodating women's preference for self-sampling.

  4. Hierarchical modelling for the environmental sciences statistical methods and applications

    CERN Document Server

    Clark, James S

    2006-01-01

    New statistical tools are changing the way in which scientists analyze and interpret data and models. Hierarchical Bayes and Markov Chain Monte Carlo methods for analysis provide a consistent framework for inference and prediction where information is heterogeneous and uncertain, processes are complicated, and responses depend on scale. Nowhere are these methods more promising than in the environmental sciences.

  5. Incremental Validity and Informant Effect from a Multi-Method Perspective: Assessing Relations between Parental Acceptance and Children's Behavioral Problems.

    Science.gov (United States)

    Izquierdo-Sotorrío, Eva; Holgado-Tello, Francisco P; Carrasco, Miguel Á

    2016-01-01

    This study examines the relationships between perceived parental acceptance and children's behavioral problems (externalizing and internalizing) from a multi-informant perspective. Using mothers, fathers, and children as sources of information, we explore the informant effect and incremental validity. The sample was composed of 681 participants (227 children, 227 fathers, and 227 mothers). Children's (40% boys) ages ranged from 9 to 17 years (M = 12.52, SD = 1.81). Parents and children completed both the Parental Acceptance Rejection/Control Questionnaire (PARQ/Control) and the check list of the Achenbach System of Empirically Based Assessment (ASEBA). Statistical analyses were based on the correlated uniqueness multitrait-multimethod matrix (model MTMM) by structural equations and different hierarchical regression analyses. Results showed a significant informant effect and a different incremental validity related to which combination of sources was considered. A multi-informant perspective rather than a single one increased the predictive value. Our results suggest that mother-father or child-father combinations seem to be the best way to optimize the multi-informant method in order to predict children's behavioral problems based on perceived parental acceptance.

  6. Space Station Freedom Environmental Health Care Program

    Science.gov (United States)

    Richard, Elizabeth E.; Russo, Dane M.

    1992-01-01

    The paper discusses the environmental planning and monitoring aspects of the Space Station Freedom (SSF) Environmental Health Care Program, which encompasses all phases of the SSF assembly and operation from the first element entry at MB-6 through the Permanent Manned Capability and beyond. Environmental planning involves the definition of acceptability limits and monitoring requirements for the radiation dose barothermal parameters and potential contaminants in the SSF air and water and on internal surfaces. Inflight monitoring will be implemented through the Environmental Health System, which consists of five subsystems: Microbiology, Toxicology, Water Quality, Radiation, and Barothermal Physiology. In addition to the environmental data interpretation and analysis conducted after each mission, the new data will be compared to archived data for statistical and long-term trend analysis and determination of risk exposures. Results of these analyses will be used to modify the acceptability limits and monitoring requirements for the future.

  7. Development of a simplified method for Tritium measurement in the environmental water

    International Nuclear Information System (INIS)

    Sakuma, Y.; Yamanishi, H.; Iida, T.; Koganezawa, T.; Kakiuchi, M.; Satake, H.

    2002-01-01

    In Japan the tritium concentrations in the environmental water figure out at approximately 0.5-2Bq/kg-H 2 O and tends to get a little lower than at the moment. The least detectable limit enabled to count by the liquid scintillation counter attained to merely 0.4Bq/kg-H 2 O. It can survey that it is likely to have been impossible to immediately measure a tritium concentration in an environmental water by the liquid scintillation method. Although there can be some alternative methods, the liquid scintillation together with electrolysis enrichment must be the most effective measurement because we do not need to change any useful managements. We already reported that an immediate counting by the liquid scintillation method for the measurement of environmental samples such as rain, river and tap waters, the membrane filtration was an available alternative way to the distillation of the low level water samples

  8. A numerical calculation method of environmental impacts for the deep sea mining industry - a review.

    Science.gov (United States)

    Ma, Wenbin; van Rhee, Cees; Schott, Dingena

    2018-03-01

    Since the gradual decrease of mineral resources on-land, deep sea mining (DSM) is becoming an urgent and important emerging activity in the world. However, until now there has been no commercial scale DSM project in progress. Together with the reasons of technological feasibility and economic profitability, the environmental impact is one of the major parameters hindering its industrialization. Most of the DSM environmental impact research focuses on only one particular aspect ignoring that all the DSM environmental impacts are related to each other. The objective of this work is to propose a framework for the numerical calculation methods of the integrated DSM environmental impacts through a literature review. This paper covers three parts: (i) definition and importance description of different DSM environmental impacts; (ii) description of the existing numerical calculation methods for different environmental impacts; (iii) selection of a numerical calculation method based on the selected criteria. The research conducted in this paper provides a clear numerical calculation framework for DSM environmental impact and could be helpful to speed up the industrialization process of the DSM industry.

  9. Determining the Environmental Effects of Indirect Subsidies: Integrated Method and Application to the Netherlands

    NARCIS (Netherlands)

    van Beers, C.; van den Bergh, J.C.J.M.; de Moor, A.; Oosterhuis, F.H.

    2007-01-01

    The term 'environmentally damaging subsidies' covers all sorts of direct and indirect subsidies with negative consequences for the environment. This article presents a method to determine the environmental impact of these subsidies. It combines a microeconomic framework with an environmental impact

  10. COMPARISON OF THE ENVIRONMENTAL IMPACT OF DIFFERENT METHODS OF MINING WASTE DISPOSAL TECHNOLOGY USING AHP METHOD

    Directory of Open Access Journals (Sweden)

    Justyna Kubicz

    2016-05-01

    Full Text Available Exploitation of tailing ponds sites for storing all types of waste materials creates multiple problems concerning waste disposal and the environmental impact of the waste. Tailing ponds waste may comprise e.g. flotation tailings from ore enrichment plants. Despite the fact that companies / corporations use state-of-the-art methods of extraction and processing of copper ore, and introduce modern systems of organization and production management, the area located closest to the reservoir is exposed to its negative effects. Many types of waste material are a valuable source of secondary raw materials which are suitable for use by various industries. Examples of such materials are mining waste (flotation tailings, usually neutral to the environment, whose quantities produced in the process of exploitation of minerals is sizeable. The article compares different technological methods of mining waste disposal using AHP method and their environmental impact.

  11. Flaw acceptance criteria taking into consideration the NDT: radiographic and ultrasonic testing. Analysis through the fracture mechanics methods

    International Nuclear Information System (INIS)

    Capurro, E.; Alicino, F.; Corvi, A.

    1993-01-01

    The present study compares and evaluates the flaw acceptance criteria of the non-destructive inspections meeting European Community standards, through the application of the fracture mechanics methods that were determined and verified by the previous activity. Some choices were made; these, however, do not change the general validity of the conclusions. Shaved full-penetration butt welds of Class 1 components making up the primary circuit were considered and the following parameters varied: standards: French, German, Italian (ASME III) and UK; material: AISI 316 and low alloy steel A 533; base material and weld metal; temperature: RT, 370 deg C for the austenitic and 260 deg C for the ferritic steel; ultrasonic and radiographic methods; defect position: surface and internal; stress condition: situations with different primary and secondary stresses. From a preliminary examination of this study it is evident that the large quantity of results available and the abundance of information contained therein make a simple and exhaustive synthesis difficult. In fact, different analyses are possible and we have, therefore, limited the research to activities to perform a comparison and a general evaluation of the acceptance criteria of the non-destructive testing. (authors). 57 refs., 25 figs., 11 tabs

  12. 40 CFR 205.57-7 - Acceptance and rejection of batch sequence.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Acceptance and rejection of batch sequence. 205.57-7 Section 205.57-7 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Medium and Heavy Trucks § 205...

  13. Wind energy and social acceptability

    International Nuclear Information System (INIS)

    Feurtey, E.

    2008-01-01

    This document was prepared as part of a decentralized collaboration between Quebec and France to share knowledge regarding strategies and best practices in wind power development. It reviewed the social acceptance of Quebec's wind power industry, particularly at the municipal level. The wind industry is growing rapidly in Quebec, and this growth has generated many reactions ranging from positive to negative. The purpose of this joint effort was to describe decision making steps to developing a wind turbine array. The history of wind development in Quebec was discussed along with the various hardware components required in a wind turbine and different types of installations. The key element in implementing wind turbine arrays is to establish public acceptance of the project, followed by a good regulatory framework to define the roles and responsibilities of participants. The production of electricity from wind turbines constitutes a clean and renewable source of energy. Although it is associated with a reduction in greenhouse gas emissions, this form of energy can also have negative environmental impacts, including noise. The revenues generated by wind parks are important factors in the decision making process. Two case studies in Quebec were presented. refs., tabs., figs.

  14. Psychological factors influencing sustainable energy technology acceptance : A review-based comprehensive framework

    NARCIS (Netherlands)

    Huijts, N. M. A.; Molin, E. J. E.; Steg, L.

    Environmental and societal problems related to energy use have spurred the development of sustainable energy technologies, such as wind mills, carbon capture and storage, and hydrogen vehicles. Public acceptance of these technologies is crucial for their successful introduction into society.

  15. Preferred delivery method and acceptability of Wheat-Soy Blend (WSB++) as a daily complementary food supplement in northwest Bangladesh.

    Science.gov (United States)

    Shamim, Abu Ahmed; Hanif, Abu A M; Merrill, Rebecca D; Campbell, Rebecca K; Kumkum, Mehnaz Alam; Shaikh, Saijuddin; de Pee, Saskia; Ahmed, Tahmeed; Parveen, Monira; Mehra, Sucheta; Klemm, Rolf D W; Labrique, Alain B; West, Keith P; Christian, Parul

    2015-01-01

    Fortified blended foods (FBFs) are widely used to prevent undernutrition in early childhood in food-insecure settings. We field tested enhanced Wheat Soy Blend (WSB++)-a FBF fortified with micronutrients, milk powder, sugar, and oil-in preparation for a complementary food supplement (CFS) trial in rural northwestern Bangladesh. Formative work was conducted to determine the optimal delivery method (cooked vs. not) for this CFS, to examine mothers' child feeding practices with and acceptance of the WSB++, and to identify potential barriers to adherence. Our results suggest WSB++ is an acceptable CFS in rural Bangladesh and the requirement for mothers to cook WSB++ at home is unlikely to be a barrier to its daily use as a CFS in this population.

  16. Environmental psychology: history, scope and methods

    NARCIS (Netherlands)

    Steg, L.; Berg, van den A.E.; Groot, de J.I.M.

    2012-01-01

    This book aims to give an introduction in environmental psychology. We defi ne environmental psychology as the discipline that studies the interplay between individuals and their built and natural environment. This means that environmental psychology examines the infl uence of the environment on

  17. Children acceptance of laser dental treatment

    Science.gov (United States)

    Lazea, Andreea; Todea, Carmen

    2016-03-01

    Objectives: To evaluate the dental anxiety level and the degree of acceptance of laser assisted pedodontic treatments from the children part. Also, we want to underline the advantages of laser use in pediatric dentistry, to make this technology widely used in treating dental problems of our children patients. Methods: Thirty pediatric dental patients presented in the Department of Pedodontics, University of Medicine and Pharmacy "Victor Babeş", Timişoara were evaluated using the Wong-Baker pain rating scale, wich was administered postoperatory to all patients, to assess their level of laser therapy acceptance. Results: Wong-Baker faces pain rating scale (WBFPS) has good validity and high specificity; generally it's easy for children to use, easy to compare and has good feasibility. Laser treatment has been accepted and tolerated by pediatric patients for its ability to reduce or eliminate pain. Around 70% of the total sample showed an excellent acceptance of laser dental treatment. Conclusions: Laser technology is useful and effective in many clinical situations encountered in pediatric dentistry and a good level of pacient acceptance is reported during all laser procedures on hard and soft tissues.

  18. A simplified method for quantitative assessment of the relative health and safety risk of environmental management activities

    International Nuclear Information System (INIS)

    Eide, S.A.; Smith, T.H.; Peatross, R.G.; Stepan, I.E.

    1996-09-01

    This report presents a simplified method to assess the health and safety risk of Environmental Management activities of the US Department of Energy (DOE). The method applies to all types of Environmental Management activities including waste management, environmental restoration, and decontamination and decommissioning. The method is particularly useful for planning or tradeoff studies involving multiple conceptual options because it combines rapid evaluation with a quantitative approach. The method is also potentially applicable to risk assessments of activities other than DOE Environmental Management activities if rapid quantitative results are desired

  19. Representativeness of environmental impact assessment methods regarding Life Cycle Inventories.

    Science.gov (United States)

    Esnouf, Antoine; Latrille, Éric; Steyer, Jean-Philippe; Helias, Arnaud

    2018-04-15

    Life Cycle Assessment (LCA) characterises all the exchanges between human driven activities and the environment, thus representing a powerful approach for tackling the environmental impact of a production system. However, LCA practitioners must still choose the appropriate Life Cycle Impact Assessment (LCIA) method to use and are expected to justify this choice: impacts should be relevant facing the concerns of the study and misrepresentations should be avoided. This work aids practitioners in evaluating the adequacy between the assessed environmental issues and studied production system. Based on a geometrical standpoint of LCA framework, Life Cycle Inventories (LCIs) and LCIA methods were localized in the vector space spanned by elementary flows. A proximity measurement, the Representativeness Index (RI), is proposed to explore the relationship between those datasets (LCIs and LCIA methods) through an angular distance. RIs highlight LCIA methods that measure issues for which the LCI can be particularly harmful. A high RI indicates a close proximity between a LCI and a LCIA method, and highlights a better representation of the elementary flows by the LCIA method. To illustrate the benefits of the proposed approach, representativeness of LCIA methods regarding four electricity mix production LCIs from the ecoinvent database are presented. RIs for 18 LCIA methods (accounting for a total of 232 impact categories) were calculated on these LCIs and the relevance of the methods are discussed. RIs prove to be a criterion for distinguishing the different LCIA methods and could thus be employed by practitioners for deeper interpretations of LCIA results. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Discussion on the method of environmental radiological impact assessment for the highway construction project

    International Nuclear Information System (INIS)

    Qiu Guohua

    2008-01-01

    Based on the characteristics and environmental radiological impact of the highway construction project, the basic procedure of environmental radiological impact assessment for the highway construction project is put forward, including analysis and determination of contamination sources, selection of evaluation factors, determination of assessment range and dose limit, environmental investigation, environmental impact prediction and assessment. The working method of each procedure is analyzed. (authors)

  1. Is renewable energy 100% environmentally safe

    International Nuclear Information System (INIS)

    Nasr, Ali Ahmed

    2006-01-01

    Renewable energy (RE) concerned are usually optimistic in introducing RE as environmentally safe resource. This might be reasonably acceptable when compared with conventional energy resources, there should be some side effects however. Those effects, and critics, when considered and possibly avoided, RE sources will be environmentally more acceptable and as a result will be appreciated by consumers. In this paper we try to investigate and point out some of these critics, and negative impacts by examining examples of some RE systems and how different solutions were tackled and partially managed. Through Re resources have advantages over other resources, when environmental issues are considered, there still exists, however, some negative impacts on the environment caused by RE resources. Present study showed that the above mentioned impacts can be reduced to some reasonable level.(Author)

  2. Pesticide Environmental Accounting: A method for assessing the external costs of individual pesticide applications

    International Nuclear Information System (INIS)

    Leach, A.W.; Mumford, J.D.

    2008-01-01

    The Pesticide Environmental Accounting (PEA) tool provides a monetary estimate of environmental and health impacts per hectare-application for any pesticide. The model combines the Environmental Impact Quotient method and a methodology for absolute estimates of external pesticide costs in UK, USA and Germany. For many countries resources are not available for intensive assessments of external pesticide costs. The model converts external costs of a pesticide in the UK, USA and Germany to Mediterranean countries. Economic and policy applications include estimating impacts of pesticide reduction policies or benefits from technologies replacing pesticides, such as sterile insect technique. The system integrates disparate data and approaches into a single logical method. The assumptions in the system provide transparency and consistency but at the cost of some specificity and precision, a reasonable trade-off for a method that provides both comparative estimates of pesticide impacts and area-based assessments of absolute impacts. - A method to estimate the external costs of a pesticide application based on the ecotoxicology, environmental behaviour and application rate of an active ingredient

  3. Blog acceptance model: An empirical study on exploring users’ acceptance and continual usage of blogs

    Institute of Scientific and Technical Information of China (English)

    ZHAO; Yuxiang; ZHU; Qinghua

    2009-01-01

    Blogs have permeated into our daily lives at a fast speed,and various kinds of blog spaces have attracted our attention.However,little effort has been made on studying the users’motivation to participate in blog activities.This paper aims to construct a theoretical model about the blog adoption based on technology acceptance model(TAM theory),social capital theory and social exchange theory,and put forward 18 related hypotheses.Then the survey method is adopted to analyze the data from 208 questionnaires using the SPSS and LISREL tools,and to examine the theoretical model and hypotheses.Finally,the paper makes a discussion from five aspects due to the results of data analysis,including individual driving factors,group driving factors,community driving factors,technology acceptance factors and moderating variables.The results show that curiosity/enjoyment,user’s experience,social interaction and social identification will greatly affect users’motivation to accept a blog;meanwhile,perceived ease of use,exchange cost and trust will partially influence users’intention to participate in blog activities.The results also suggest that age and education degrees have significant moderating effects on users’acceptance and updating of blogs.

  4. Fueled viking generator S/N 106 acceptance vibration test report

    International Nuclear Information System (INIS)

    Anderson, C.; Brewer, C.O.; Abrahamson, S.G.

    1976-01-01

    The Viking Generator S/N 106 was vibrated to the Teledyne Isotope Flight Acceptance Schedule (Random Only) with no deviation from normal generator functional output. Radiographic analysis and power tests before and after the vibration test indicated no change in the condition of the generator. The work was conducted in the Alpha Fuels Environmental Test Facility at Mound Laboratory

  5. A cost effective method for the determination of 210Po and 210Pb in environmental materials

    International Nuclear Information System (INIS)

    Clayton, R.F.; Bradley, E.J.

    1995-01-01

    The majority of the methods for the determination of 210 Pb and 210 Po in environmental materials were developed in the 1960s. However, with the advances in technology since that time, particularly in the areas of ion-exchange chromatography and instrumentation, new methods may be more appropriate to measure these radionuclides in environmental media such as foodstuffs. A review was conducted of potentially suitable methods. Four methods were selected for detailed evaluation on the basis of cost and sensitivity. A cheap, sensitive and simple method is recommended for the analysis of 210 Pb and 210 Po in environmental materials

  6. Environmental and wider implications of political impediments to environmental tax reform

    International Nuclear Information System (INIS)

    Clinch, J. Peter; Dunne, Louise; Dresner, Simon

    2006-01-01

    The most common notion of environmental tax reform (ETR) is the use of the revenue from environmental taxes to reduce distortionary labour taxes. The PETRAS project has shown that there are a number of social and political impediments to implementing such reform. This paper firstly outlines some of the environmental and economic implications of environmental taxes generally. It goes on to explore three broad approaches to ETR, based on the allocation of the tax revenues, and explores the environmental and economic implications of each approach and the likelihood of political and social acceptance. Particular attention is paid to reducing regressive impacts and impacts on competitiveness. It is concluded that some combination of earmarking a proportion of revenues to environmental projects and diverting rest to reduce labour taxes is probably the best approach in light of the results of the project. The balance should depend upon local labour market and macroeconomic conditions, the extent to which environmental projects are already funded and the extent of government failure, i.e., the problems of resource allocation that occur as a result of government intervention in markets. Funding should only be provided to environmental projects if it can be shown that, in themselves, they are economically efficient. In addition, it is most important that a proportion of the funds be used to ameliorate any regressive impacts. It is also important to bear in mind that hypothecation or recycling of revenue is not the same as a tax shift, which is a reform of the entire system, so some of these approaches may take away from the integrity of ETR. The paper concludes with some of the initiatives that are likely to be necessary to facilitate social and political acceptance of this approach to ETR

  7. Determinants of debit cards acceptance: An empirical investigation

    International Nuclear Information System (INIS)

    Ismail, Shafinar; Adnan, Azimah; Azizi, Amsyar; Bakri, Mohamed Hariri; Zulkepli, Jafri

    2014-01-01

    These days, most of the Malaysians realize that the consumption of debit card will help them to reduce the household debt. Thus, it is important to analyse the acceptance of debit cards for further enhancement and expanding its market share in Malaysia. In addition, there is lacked of research being conducted on the determinants affecting the acceptance of debit cards among Malaysians. Thus, the study aimed to investigate the factors affecting the acceptance of debit cards. This study focuses on payment methods, consumer attitude, and safety of debit card in acceptance of debit cards. Questionnaires were distributed to the 300 respondents. The sampling procedure adopted was stratified random sampling. The data obtained were analysed using SPSS 20.0 which involves scale reliability, descriptive and regression analysis. The result indicates that payment methods, consumer attitude and safety are the determinants of debit cards acceptance. Safety is the best predictor as most of the customers are confidents to use debit cards because of the security being developed around these debit card transactions. The analyses presented in this study can be used by policymakers and managers as a guide to promote banking products and services. The findings achieved in this study will be of interest for practitioners and academics concerned with developments of the Malaysian banking industry

  8. Determinants of debit cards acceptance: An empirical investigation

    Energy Technology Data Exchange (ETDEWEB)

    Ismail, Shafinar; Adnan, Azimah; Azizi, Amsyar [Faculty of Business and Management, Universiti Teknologi MARA, Melaka 75300 (Malaysia); Bakri, Mohamed Hariri [Faculty of Technology Management And Technopreneurship, Universiti Teknikal Malaysia, Melaka 76100 (Malaysia); Zulkepli, Jafri [Faculty of Quantitative Science, Universiti Utara Malaysia, Sintok Kedah (Malaysia)

    2014-12-04

    These days, most of the Malaysians realize that the consumption of debit card will help them to reduce the household debt. Thus, it is important to analyse the acceptance of debit cards for further enhancement and expanding its market share in Malaysia. In addition, there is lacked of research being conducted on the determinants affecting the acceptance of debit cards among Malaysians. Thus, the study aimed to investigate the factors affecting the acceptance of debit cards. This study focuses on payment methods, consumer attitude, and safety of debit card in acceptance of debit cards. Questionnaires were distributed to the 300 respondents. The sampling procedure adopted was stratified random sampling. The data obtained were analysed using SPSS 20.0 which involves scale reliability, descriptive and regression analysis. The result indicates that payment methods, consumer attitude and safety are the determinants of debit cards acceptance. Safety is the best predictor as most of the customers are confidents to use debit cards because of the security being developed around these debit card transactions. The analyses presented in this study can be used by policymakers and managers as a guide to promote banking products and services. The findings achieved in this study will be of interest for practitioners and academics concerned with developments of the Malaysian banking industry.

  9. Determinants of debit cards acceptance: An empirical investigation

    Science.gov (United States)

    Ismail, Shafinar; Bakri, Mohamed Hariri; Zulkepli, Jafri; Adnan, Azimah; Azizi, Amsyar

    2014-12-01

    These days, most of the Malaysians realize that the consumption of debit card will help them to reduce the household debt. Thus, it is important to analyse the acceptance of debit cards for further enhancement and expanding its market share in Malaysia. In addition, there is lacked of research being conducted on the determinants affecting the acceptance of debit cards among Malaysians. Thus, the study aimed to investigate the factors affecting the acceptance of debit cards. This study focuses on payment methods, consumer attitude, and safety of debit card in acceptance of debit cards. Questionnaires were distributed to the 300 respondents. The sampling procedure adopted was stratified random sampling. The data obtained were analysed using SPSS 20.0 which involves scale reliability, descriptive and regression analysis. The result indicates that payment methods, consumer attitude and safety are the determinants of debit cards acceptance. Safety is the best predictor as most of the customers are confidents to use debit cards because of the security being developed around these debit card transactions. The analyses presented in this study can be used by policymakers and managers as a guide to promote banking products and services. The findings achieved in this study will be of interest for practitioners and academics concerned with developments of the Malaysian banking industry.

  10. Marketing for Acceptance

    Directory of Open Access Journals (Sweden)

    Tina L. Johnston, Ph.D.

    2009-11-01

    Full Text Available Becoming a researcher comes with the credentializing pressure to publish articles in peer-reviewed journals (Glaser, 1992; Glaser, 2007; Glaser, 2008. The work intensive process is exacerbated when the author’s research method is grounded theory. This study investigated the concerns of early and experienced grounded theorists to discover how they worked towards publishing research projects that applied grounded theory as a methodology. The result was a grounded theory of marketing for acceptance that provides the reader with insight into ways that classic grounded theorists have published their works. This is followed by a discussion of ideas for normalizing classic grounded theory research methods in our substantive fields.

  11. Responsible technology acceptance

    DEFF Research Database (Denmark)

    Toft, Madeleine Broman; Schuitema, Geertje; Thøgersen, John

    2014-01-01

    As a response to climate change and the desire to gain independence from imported fossil fuels, there is a pressure to increase the proportion of electricity from renewable sources which is one of the reasons why electricity grids are currently being turned into Smart Grids. In this paper, we focus...... on private consumers’ acceptance of having Smart Grid technology installed in their home. We analyse acceptance in a combined framework of the Technology Acceptance Model and the Norm Activation Model. We propose that individuals are only likely to accept Smart Grid technology if they assess usefulness...... in terms of a positive impact for society and the environment. Therefore, we expect that Smart Grid technology acceptance can be better explained when the well-known technology acceptance parameters included in the Technology Acceptance Model are supplemented by moral norms as suggested by the Norm...

  12. [A Method Research on Environmental Damage Assessment of a Truck Rollover Pollution Incident].

    Science.gov (United States)

    Cai, Feng; Zhao, Shi-ho; Chen, Gang-cai; Xian, Si-shu; Yang, Qing-ling; Zhou, Xian-jie; Yu, Hai

    2015-05-01

    With high occurrence of sudden water pollution incident, China faces an increasingly severe situation of water environment. In order to deter the acts of environmental pollution, ensure the damaged resources of environment can be restored and compensated, it is very critical to quantify the economic losses caused by the sudden water pollution incident. This paper took truck rollover pollution incidents in Chongqing for an example, established a set of evaluation method for quantifying the environmental damage, and then assessed the environmental damage by the method from four aspects, including the property damage, ecological environment and resources damages, the costs of administrative affairs in emergency disposal, and the costs of investigation and evaluation.

  13. Determination of 90Sr in environmental samples by microwave assisted digestion - chromatographic separation

    International Nuclear Information System (INIS)

    Torres, J.M.; Llaurado, M.; Rauret, G.

    1998-01-01

    The stages involved in the determination of 90 Sr in environmental samples are: sample attack, radiochemical separation (of both 90 Sr and its progeny 90 Y) and measurement. For the determination of 90 Sr, the introduction of microwave-assisted digestion methods has improved acid attack by drastically decreasing both digestion time and the volume of acidic reagents. Recent studies describe many applications of microwave-assisted methods for the determination of inorganic and organometallic compounds in several matrices. We have recently studied the microwave-assisted digestion of soils for the 90 Sr determination. The presented work extends the application of microwaves for the 90 Sr determination to other environmental samples such as sediments, vegetation and milk. An open-focused microwave system, which accepts large samples intakes usually required for radioanalytical chemistry due to the low level content of radionuclides in environmental samples, was used. This system can handle up to 10 g of sample intake which, in many cases, is enough to have acceptable limits of detection. Different digestion procedures are optimised for each matrix studied, paying special attention to the microwave power, the time of digestion and the volume of acidic reagents. Once the sample is in solution a new separation procedure using a specific resin -Sr.Spec- is applied and the measurement is performed by liquid scintillation. The results obtained are compared with a previously optimised method based on liquid-liquid extraction of 90 Y and Cerenkov radiation measurement

  14. A watershed-based method for environmental vulnerability assessment with a case study of the Mid-Atlantic region

    Energy Technology Data Exchange (ETDEWEB)

    Tran, Liem T., E-mail: ltran1@utk.edu [Department of Geography, University of Tennessee, Knoxville, TN (United States); O& #x27; Neill, Robert V. [OTIE and Associates, Oak Ridge, TN (United States); Smith, Elizabeth R. [U.S. Environmental Protection Agency, Office of Research and Development, National Exposure Research Laboratory, Research Triangle Park, NC (United States)

    2012-04-15

    The paper presents a method for environmental vulnerability assessment with a case study of the Mid-Atlantic region. The method is based on the concept of 'self-/peer-appraisal' of a watershed in term of vulnerability. The self-/peer-appraisal process is facilitated by two separate linear optimization programs. The analysis provided insights on the environmental conditions, in general, and the relative vulnerability pattern, in particular, of the Mid-Atlantic region. The suggested method offers a simple but effective and objective way to perform a regional environmental vulnerability assessment. Consequently the method can be used in various steps in environmental assessment and planning. - Highlights: Black-Right-Pointing-Pointer We present a method for regional environmental vulnerability assessment. Black-Right-Pointing-Pointer It is based on the self-/peer-appraisal concept in term of vulnerability. Black-Right-Pointing-Pointer The analysis is facilitated by two separate linear optimization programs. Black-Right-Pointing-Pointer The method provides insights on the regional relative vulnerability pattern.

  15. Nuclear safety targets and problems of social acceptability

    International Nuclear Information System (INIS)

    Macgill, S.M.

    1989-01-01

    The following are among the factors which make the problem of setting acceptable safety targets for societal protection from possible nuclear accidents one of such formidable proportion: The varied and often conflicting positions among and between the many constituencies with a claim to interest in the problem: local, national and international populations; lay, workplace and professional communities; private and public interests; active environmental lobbies and intentionally passive publics; powerful influences and politically unprivileged classes; press and mass media. To seek 'acceptability' of safety targets through common consensus is problematised by the difficulty in overcoming the immense social and historical forces that give rise to the prevailing contrariety among different people's positions. To seek resolution of differences by some appropriate weighting of the different views of different constituencies is problematised by the lack of unique identification of what the constituencies are, by the difficulty in faithfully representing their views, and by the absence of 'laws of social entitlement' vis-a-vis the weight that should be given to each. In sum, the problem of setting socially acceptable safety targets is itself bound up with inherently open ended questions of democracy and representation. (author)

  16. Nuclear methods in environmental and energy research: proceedings of fifth international conference

    International Nuclear Information System (INIS)

    Vogt, J.R.

    1984-04-01

    The conference includes papers in the areas of: (1) gamma-ray and x-ray spectroscopy and software, (2) environmental and geochemical methods and applications; (3) energy methods and applications; (4) nuclear and atomic methodology; and (5) biological and medical methods and applications. Papers have been individually abstracted for the data base

  17. Emergy assessment method for wheat cultivar efficiency and environmental sustainability

    Directory of Open Access Journals (Sweden)

    Janusz Jankowiak

    2009-01-01

    Full Text Available The method based on emergy was applied to quantify the fluxes of the energy, matter and monetary investment use (water, seeds, work, fertilizer and plant protecting agents, fuel, goods and services, productivity, environmental services and sustainability in typical wheat cultivar conducted in Wielkopolska. In order to convert all the flows mentioned into common base (seJ a conversion factors (solar transformities were used. In this way it was possible to consider also such flows that are free and generally neglected in the traditional balances. Generally only 52% emergy inflow is delivered by financial investment, while the remaining part, delivered in the form of the environmental services, is free. The Emergy Yield Ratio EYR = 1.14 indicate a low level of output per emergy investment unit. The values of Environmental Loading Ratio ELR = 11 and Emergy Sustainability Index ESI = 0.1 indicate an environmental stress and low level of cultivar sustainability, respectively. The final cultivar product (wheat has the emergy density 4.35 E12 seJ/kg and transformity 26.3 E4 seJ/J.

  18. Consumer acceptance and aroma characterization of navy bean (Phaseolus vulgaris) powders prepared by extrusion and conventional processing methods.

    Science.gov (United States)

    Szczygiel, Edward J; Harte, Janice B; Strasburg, Gale M; Cho, Sungeun

    2017-09-01

    Food products produced with bean ingredients are gaining in popularity among consumers due to the reported health benefits. Navy bean (Phaseolus vulgaris) powder produced through extrusion can be considered as a resource-efficient alternative to conventional methods, which often involve high water inputs. Therefore, navy bean powders produced with extrusion and conventional methods were assessed for the impact of processing on consumer liking in end-use products and odor-active compounds. Consumer acceptance results reveal significant differences in flavor, texture and overall acceptance scores of several products produced with navy bean powder. Crackers produced with extruded navy bean powder received higher hedonic flavor ratings than those produced with commercial navy bean powder (P < 0.001). GC-O data showed that the commercial powder produced through conventional processing had much greater contents of several aliphatic aldehydes commonly formed via lipid oxidation, such as hexanal, octanal and nonanal with descriptors of 'grassy', 'nutty', 'fruity', 'dusty', and 'cleaner', compared to the extruded powder. Extrusion processed navy bean powders were preferred over commercial powders for certain navy bean powder applications. This is best explained by substantial differences in aroma profiles of the two powders that may have been caused by lipid oxidation. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  19. Economic, Environmental and Moral Acceptance of Renewable Energy: A Case Study-The Agricultural Biogas Plant at Pěčín.

    Science.gov (United States)

    Vochozka, Marek; Maroušková, Anna; Šuleř, Petr

    2018-02-01

    The production of renewable energy in agricultural biogas plants is being widely criticized because-among other things-most of the feedstock comes from purpose-grown crops like maize. These activities (generously subsidized in the Czech Republic) generate competitive pressure to other crops that are used for feeding or food production, worsening their affordability. Unique pretreatment technology that allows substitution of the purpose-grown crops by farming residues (such as husk or straw) was built 6 years ago on a commercial basis in Pěčín (Czech Republic) under modest funding and without publicity. The design of the concept; financial assessment and moral viewpoint were analyzed based on practical operating data. It showed that the apparatus improves economic, environmental and moral acceptance as well. However, according to the government's view, public funding for this type of processing was shortened, "because waste materials represent a lower cost". The impact of such governance was analyzed as well.

  20. Wastes behavior and environmental impacts, researches and methods; Comportement des dechets et impacts environnementaux, recherches et methodes

    Energy Technology Data Exchange (ETDEWEB)

    Labeyrie, J; Chateau, L [Agence de l' Environnement et de la Maitrise de l' Energie, (ADEME), 49 - Angers (France); Gin, St [CEA/VALRHO - site de Marcoule, Dept. de Recherche en Retraitement et en Vitrification DRRV, 30 - Marcoule (France); and others

    2001-07-01

    The wastes management policy takes into account more and more often the environmental impacts mastership. This evolution is particularly appreciable when the wastes directly interact with the environment: storage, utilization for roads construction and so on. In this context the ADEME organized the 8 june 2000 a colloquium to present the new evaluation methods and tools, to describe the regulations and to identify the research programs needed for this environmental policy. Eleven papers are presented. (A.L.B.)

  1. Acceptance of waste for disposal in the potential United States repository at Yucca Mountain, Nevada

    International Nuclear Information System (INIS)

    Stahl, D.; Svinicki, K.

    1996-01-01

    This paper addresses the process for the acceptance of waste into the waste management system (WMS) with a focus on the detailed requirements identified from the Waste Acceptance System Requirements Document. Also described is the recent dialogue between OCRWM and the Office of Environmental Management to resolve issues, including the appropriate interpretation and application of regulatory and system requirements to DOE-owned spent fuel. Some information is provided on the design of the repository system to aid the reader in understanding how waste that is accepted into the WMS is received and emplaced in the repository

  2. Affective Learning: Environmental Ethics and Human Ecology

    Science.gov (United States)

    Gough, Noel P.

    1977-01-01

    This discussion of home economics as a discipline which should focus on its affective foundations, covers the following areas: Affective context of home economics education, the adequacy of the home economics value complex for coping with environmental problems, and toward an acceptable environmental ethic. (SH)

  3. Method validation and uncertainty evaluation of organically bound tritium analysis in environmental sample.

    Science.gov (United States)

    Huang, Yan-Jun; Zeng, Fan; Zhang, Bing; Chen, Chao-Feng; Qin, Hong-Juan; Wu, Lian-Sheng; Guo, Gui-Yin; Yang, Li-Tao; Shang-Guan, Zhi-Hong

    2014-08-01

    The analytical method for organically bound tritium (OBT) was developed in our laboratory. The optimized operating conditions and parameters were established for sample drying, special combustion, distillation, and measurement on a liquid scintillation spectrometer (LSC). Selected types of OBT samples such as rice, corn, rapeseed, fresh lettuce and pork were analyzed for method validation of recovery rate reproducibility, the minimum detection concentration, and the uncertainty for typical low level environmental sample was evaluated. The combustion water recovery rate of different dried environmental sample was kept at about 80%, the minimum detection concentration of OBT ranged from 0.61 to 0.89 Bq/kg (dry weight), depending on the hydrogen content. It showed that this method is suitable for OBT analysis of environmental sample with stable recovery rate, and the combustion water yield of a sample with weight about 40 g would provide sufficient quantity for measurement on LSC. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Computational simulation in architectural and environmental acoustics methods and applications of wave-based computation

    CERN Document Server

    Sakamoto, Shinichi; Otsuru, Toru

    2014-01-01

    This book reviews a variety of methods for wave-based acoustic simulation and recent applications to architectural and environmental acoustic problems. Following an introduction providing an overview of computational simulation of sound environment, the book is in two parts: four chapters on methods and four chapters on applications. The first part explains the fundamentals and advanced techniques for three popular methods, namely, the finite-difference time-domain method, the finite element method, and the boundary element method, as well as alternative time-domain methods. The second part demonstrates various applications to room acoustics simulation, noise propagation simulation, acoustic property simulation for building components, and auralization. This book is a valuable reference that covers the state of the art in computational simulation for architectural and environmental acoustics.  

  5. Estimation methods of eco-environmental water requirements: Case study

    Institute of Scientific and Technical Information of China (English)

    YANG Zhifeng; CUI Baoshan; LIU Jingling

    2005-01-01

    Supplying water to the ecological environment with certain quantity and quality is significant for the protection of diversity and the realization of sustainable development. The conception and connotation of eco-environmental water requirements, including the definition of the conception, the composition and characteristics of eco-environmental water requirements, are evaluated in this paper. The classification and estimation methods of eco-environmental water requirements are then proposed. On the basis of the study on the Huang-Huai-Hai Area, the present water use, the minimum and suitable water requirement are estimated and the corresponding water shortage is also calculated. According to the interrelated programs, the eco-environmental water requirements in the coming years (2010, 2030, 2050) are estimated. The result indicates that the minimum and suitable eco-environmental water requirements fluctuate with the differences of function setting and the referential standard of water resources, and so as the water shortage. Moreover, the study indicates that the minimum eco-environmental water requirement of the study area ranges from 2.84×1010m3 to 1.02×1011m3, the suitable water requirement ranges from 6.45×1010m3 to 1.78×1011m3, the water shortage ranges from 9.1×109m3 to 2.16×1010m3 under the minimum water requirement, and it is from 3.07×1010m3 to 7.53×1010m3 under the suitable water requirement. According to the different values of the water shortage, the water priority can be allocated. The ranges of the eco-environmental water requirements in the three coming years (2010, 2030, 2050) are 4.49×1010m3-1.73×1011m3, 5.99×10m3?2.09×1011m3, and 7.44×1010m3-2.52×1011m3, respectively.

  6. Elements of quality assurance in environmental surveillance

    International Nuclear Information System (INIS)

    Johnson, L.J.

    1975-01-01

    Qualities of an environmental surveillance program requiring control or assurance are reviewed. Requirements of accuracy, reproducibility, sensitivity, acceptability, and time and cost effectiveness are qualities discussed. The controls applicable to sample collection, handling, chemical analysis, measurement and data presentation are identified and discussed as they pertain to environmental monitoring. Quality assurance program recommendations for developing and reporting environmental surveillance data are provided

  7. Gap Acceptance Behavior Model for Non-signalized

    OpenAIRE

    Fajaruddin Bin Mustakim

    2015-01-01

    The paper proposes field studies that were performed to determine the critical gap on the multiple rural roadways Malaysia, at non-signalized T-intersection by using The Raff and Logic Method. Critical gap between passenger car and motorcycle have been determined.   There are quite number of studied doing gap acceptance behavior model for passenger car however still few research on gap acceptance behavior model for motorcycle. Thus in this paper, logistic regression models were developed to p...

  8. Environmental impacts assessment of industrial estate providing with managerial process

    Energy Technology Data Exchange (ETDEWEB)

    Nouri, J.; Mahvi, A.H.; Younesian, M.; Nabizadeh, R.; Hashemi, I. [Univ. of Tehran (Iran)

    2007-07-01

    industrial estate at the construction and operational phases. The environmental impact assessment of the investigated estate was studied at the three terms of immediate, direct and indirect impacts at the short, medium and long term. By expanding of Leopold Matrix to four part matrix, in addition to amount, importance and extent of the impacts, the remaining duration of impact in the environment was assessed as a separate factor. The results of the study with two alternatives, No (performance of the project with no concern for environmental issues) and Yes (performance of the project with application of harmful environmental imapcts), were studied in construction and operation phases. The impact assessment of 'No' property resulted (-1065), therefore the execution of the project was rejected, but after reducing the harmful impact performance which resulted (+1095) has been accepted. Therefore the method of reducing harmful environmental impacts along with environmental management programs were introduced and accepted in this study.

  9. Life coaching following haematopoietic stem cell transplantation: a mixed-method investigation of feasibility and acceptability.

    Science.gov (United States)

    Kenyon, M; Young, F; Mufti, G J; Pagliuca, A; Lim, Z; Ream, E

    2015-07-01

    Haematopoietic stem cell transplantation (HSCT) cures many haematological cancers. Recovery post-HSCT is physically and psychologically challenging, lasting several months. Beyond the first post-transplant year, a fifth report difficulties encompassing practical, social and emotional domains, including finance and employment. We investigated the feasibility, acceptability and impact of a life coaching intervention designed to address psychosocial 'survivor' concerns of HSCT recipients and facilitate transition to life post-treatment. A concurrent embedded experimental mixed-method design was employed. Pre- and post-intervention data collection comprised qualitative semi-structured telephone interviews and quantitative postal questionnaires. Seven purposively sampled HSCT recipients (life coaching delivered by a professional life coach fortnightly over 8 weeks. Participants reported less anxiety, depression and fewer survivor concerns post-intervention, with a trend for lower social difficulties and increased functional well-being. Perceived self-efficacy was unchanged. Life coaching was feasible to deliver and acceptable to the participants who indicated it was a positive experience, with benefits described in diverse areas including work, lifestyle and hobbies. Life coaching within cancer services potentially offers the means to address psychosocial concerns and support transition to life after treatment, enabling patients to reach their potential, e.g. returning to employment and financial independence. Further investigation of this intervention in cancer survivors is warranted. © 2015 John Wiley & Sons Ltd.

  10. Acceptability of male condom: An Indian scenario

    Directory of Open Access Journals (Sweden)

    Balaiah Donta

    2014-01-01

    Full Text Available The National Family Planning Programme of India had introduced condom as one of the family planning methods in the late1960s. Condom was promoted as a family planning method through social marketing since its inception. With the increasing prevalence and incidence of sexually transmitted infections (STIs including HIV/AIDS, condom was also promoted as a dual method for protection against both unintended pregnancies as well as sexually transmitted infections. Despite efforts at various levels, the overall use of condom among couples in India is low. Here we present literature review of studies to understand the condom acceptability among couples in India. Specifically, the paper assesses research and programmes that have been carried out to increase the use of condom among couples; determinants of condom use; reason for not using condom; and perception versus experience of condom failure. The reported problems related to condom use included non acceptance by partner, perceived ineffectiveness, less comfort, lack of sexual satisfaction, husband′s alcohol use, depression, and anxiety, and not available at that instant. The role of media in the promotion of condom use was indicated as an important way to increase awareness and use. Multiple strategies would help in acceptance of male condom.

  11. Development of food acceptance patterns in the first years of life.

    Science.gov (United States)

    Birch, L L

    1998-11-01

    As young omnivores, children make the transition from the exclusive milk diet of infancy to consuming a variety of foods. They must learn to accept a set of the foods available in their environmental niche, and they 'come equipped' with a set of predispositions that facilitate the development of food acceptance patterns, constrained by predisposition and limited by what is offered to them. While children are predisposed to like sweet or salty foods and to avoid sour or bitter foods, their preferences for the majority of foods are shaped by repeated experience. The predispositions that shape food acceptance patterns also include neophobia and the predisposition to learn to prefer and accept new foods when they are offered repeatedly. In addition, the predisposition for associative conditioning affects children's developing food acceptance patterns, resulting in preferences for foods offered in positive contexts, while foods presented in negative contexts will become more disliked via the learning of associations with the social and environmental contexts. Children also learn to prefer energy-dense foods when consumption of those foods is followed by positive post-ingestive consequences, such as those produced when high-energy-density foods are eaten when hungry. Although children are predisposed to be responsive to the energy content of foods in controlling their intake, they are also responsive to parents' control attempts. We have seen that these parental control attempts can refocus the child away from responsiveness to internal cues of hunger and satiety and towards external factors such as the presence of palatable foods. This analysis suggests that taking a closer look at what children are learning about food and eating may provide clues regarding the formation of children's food acceptance patterns, and that this approach also suggests potential causative factors implicated in the aetiology of obesity and the emergence of weight concerns. Current data

  12. Delivering environmental benefit from the use of Environmental Quality Standards: why we need to focus on implementation.

    Science.gov (United States)

    Merrington, Graham; Peters, Adam; Whitehouse, Paul; Clarke, Robin; Merckel, Dan

    2018-02-01

    The UK has adopted a broader approach to the introduction of Environmental Quality Standard (EQS) for the aquatic environment than many other jurisdictions around the world, with a greater focus on the implementation of scientifically derived standards. This follows the publication of a report by the Royal Commission on Environmental Pollution in 1998 which drew attention to the need to recognise that whilst an EQS is often just viewed as a numerical value, it also has other important characteristics that need to be recognised if it is to be a practical and effective regulatory tool. One of the aspects that has not always been recognised was that of implementation assessment, i.e. the steps needed to ensure that a standard actually delivers environmental benefit or improvements. In many jurisdictions, there is considerable technical and sometimes political emphasis on the numerical value of the EQS (e.g. the critical concentration in an environmental matrix like water), including the method of derivation, the scrutiny of the reliability and relevance of the ecotoxicity test data and extensive deliberations of unquantified uncertainties in relation to the choice of assessment factor. The regulatory value of an EQS only comes through a comparison against a measured environmental concentration, yet only relatively limited regulatory effort has historically been expended on this component of the classic environmental risk assessment paradigm. For example, there needs to be an acceptable (i.e. small) uncertainty in the EQS, an appropriate analytical method and detection limit in the correct matrix, a method to deliver a comparison with the EQS and a robust statistical method to draw unbiased conclusions about environmental risk. In addition, we argue that there is a case for checking the consequences of introducing a standard against field data, wherever possible. This validation of the EQS rarely happens currently. We explain what implementation assessment is and why

  13. Workshop on acceleration of the validation and regulatory acceptance of alternative methods and implementation of testing strategies

    DEFF Research Database (Denmark)

    Piersma, A. H.; Burgdorf, T.; Louekari, K.

    2018-01-01

    concerning the regulatory acceptance and implementation of alternative test methods and testing strategies, with the aim to develop feasible solutions. Classical validation of alternative methods usually involves one to one comparison with the gold standard animal study. This approach suffers from...... the reductionist nature of an alternative test as compared to the animal study as well as from the animal study being considered as the gold standard. Modern approaches combine individual alternatives into testing strategies, for which integrated and defined approaches are emerging at OECD. Furthermore, progress......-focused hazard and risk assessment of chemicals requires an open mind towards stepping away from the animal study as the gold standard and defining human biologically based regulatory requirements for human hazard and risk assessment....

  14. A method proposal for cumulative environmental impact assessment based on the landscape vulnerability evaluation

    International Nuclear Information System (INIS)

    Pavlickova, Katarina; Vyskupova, Monika

    2015-01-01

    Cumulative environmental impact assessment deals with the occasional use in practical application of environmental impact assessment process. The main reasons are the difficulty of cumulative impact identification caused by lack of data, inability to measure the intensity and spatial effect of all types of impacts and the uncertainty of their future evolution. This work presents a method proposal to predict cumulative impacts on the basis of landscape vulnerability evaluation. For this purpose, qualitative assessment of landscape ecological stability is conducted and major vulnerability indicators of environmental and socio-economic receptors are specified and valuated. Potential cumulative impacts and the overall impact significance are predicted quantitatively in modified Argonne multiple matrixes while considering the vulnerability of affected landscape receptors and the significance of impacts identified individually. The method was employed in the concrete environmental impact assessment process conducted in Slovakia. The results obtained in this case study reflect that this methodology is simple to apply, valid for all types of impacts and projects, inexpensive and not time-consuming. The objectivity of the partial methods used in this procedure is improved by quantitative landscape ecological stability evaluation, assignment of weights to vulnerability indicators based on the detailed characteristics of affected factors, and grading impact significance. - Highlights: • This paper suggests a method proposal for cumulative impact prediction. • The method includes landscape vulnerability evaluation. • The vulnerability of affected receptors is determined by their sensitivity. • This method can increase the objectivity of impact prediction in the EIA process

  15. The importance of chemical analysis and quality-assurance for environmental mediation and acceptance in the use of secondary fuels in the cement plant Leube as an essential part of the ecological business strategy

    International Nuclear Information System (INIS)

    Mlekusch, T.

    2000-11-01

    In this paper I tried to combine the fields of environmental technology, environmental analysis, quality-management, environmental mediation and limiting values an the example of the use of secondary-fuels in the cement plant Leube in Gartenau (Austria). This project has proved to be very satisfying for the company and the adjoining owners. The first chapter deals with relations between environment and technology. A chronological description of the use of secondary fuels shows the development in this technology. The reactions of trace-elements in the burning process of cement clinker are described in the second chapter. Limiting values and the protection of human beings by the use of them are explained in the third chapter. The environmental mediation project of the use of secondary fuels in Gartenau is object of the fourth chapter. An essential part to acceptance is contributed by a good working quality-management and laboratory. (author)

  16. The use of multicriteria decision making methods to find the environmental costs of hydropower development alternatives

    International Nuclear Information System (INIS)

    Carlsen, A.J.; Wenstoep, F.

    1994-01-01

    The conference paper deals with a decision support system (DSS) developed to find the costs of environmental goods. The system is based on multicriteria decision making and uses pairwise comparisons of two and two criteria. The criteria weights are calculated with linear regression. When one criterion is monetary, all criteria weights can be expressed in monetary units when the weights are known. The DSS has been tested on a hydropower project in the area of Sauda in Norway. To represent the decision makers, three panels each consisting of three persons were formed. The persons were selected from governmental agencies, the developers, the local environmental administration and a local politician. The DSS worked well with the panels. One problem was that impacts of hydropower projects are very site specific and also hard to quantify. Therefore, a considerable amount of time was used in creating a cognitive understanding of the issues involved and how they were represented by quantitative criteria. Some had also difficulties in accepting the principle of expressing environmental goods in monetary units. The results so far are preliminary. This research work is part of the Norwegian research programme Energy, Environment and Development. 3 refs., 4 figs., 2 tabs

  17. Socioeconomic differences in public acceptability and car use adaptation towards urban road pricing

    DEFF Research Database (Denmark)

    Gehlert, Tina; Kramer, Christiane; Nielsen, Otto Anker

    2011-01-01

    Urban road pricing is regarded as an effective instrument to reduce traffic congestion and environmental-related problems in metropolitan areas. Whereas the overall impact of urban road pricing on car use adaptation and public acceptability is known, there are only inconsistent results concerning...

  18. The acceptability of the female and male condom: a randomized crossover trial.

    Science.gov (United States)

    Kulczycki, Andrzej; Kim, Dhong-Jin; Duerr, Ann; Jamieson, Denise J; Macaluso, Maurizio

    2004-01-01

    Although studies have assessed the acceptability of male and female condoms, comparative trial data are lacking. A sample of 108 women in stable relationships recruited from an urban, reproductive health clinic were randomly assigned to use 10 male or female condoms, followed by use of 10 of the other type. A nurse provided instruction in correct method use. Demographic information was collected in a baseline questionnaire; acceptability data were collected in follow-up and exit questionnaires and coital logs. Nonparametric and chi-square statistics were used to analyze measures of the methods' relative acceptability. Bowker's test of symmetry was adapted to test the null hypothesis of no difference in acceptability between condom types. Participants used 678 female and 700 male condoms. Although neither method scored high on user satisfaction measures, the 63 women completing the study protocol preferred the male condom to the female condom for ease of application or insertion, ease of removal, general fit, feel of the condom during intercourse and ease of penetration. Participants reported that their partner also favored the male condom, although women generally appeared to like this method more than their partner did. In a direct comparison between the methods at the end of the study, women generally judged male condoms superior on specified preference criteria. Across a range of criteria, the female condom was less acceptable than the male condom to most women and their partners. Although both types had low acceptability, they are needed and valid methods of pregnancy and disease prevention. That neither rated high on user satisfaction measures underscores the need for more barrier methods that women and men can use.

  19. A state-of-the-art report on the evaluation technology of the environmental compatibility of nuclear fuel cycle

    International Nuclear Information System (INIS)

    Lee, Dong Gyu; Oh, Won Zin; Cho, Il Hoon; Ahn, Ki Jung; Kim Young Min

    1997-09-01

    In order to evaluate the environmental compatibility of nuclear fuel cycle, the methodologies for quantifying evaluation factors and the global trend of the back-end nuclear fuel cycle is reviewed. The evaluation methods of monetary values of radiation dose are demonstrate. There are Human Capital, Legal Compensation Principles, Insurance Premium Analogies, and Willingness to Pay. It can be considered that the estimation of public acceptance cost is the estimation problem of economic value of environmental property. In this report, contingent valuation method is discussed, which is one of the estimation methods of economic value. The recent research on residual radiation detection system is analyzed. (author). 7 refs., 10 tabs., 11 figs

  20. Measures of the EU Agri-Environmental Protection Scheme (GAEPS) and their impacts on the visual acceptability of Finnish agricultural landscapes.

    Science.gov (United States)

    Tahvanainen, Liisa; Ihalainen, Marjut; Hietala-Koivu, Reija; Kolehmainen, Osmo; Tyrväinen, Liisa; Nousiainen, Ismo; Helenius, Juha

    2002-11-01

    As a member of the European Union, Finland has committed itself to creating an environmental policy for agriculture. The aims of this study were to evaluate visual impacts of the General Agri-Environmental Protection Scheme (GAEPS) and Supplementary Protection Scheme (SPS) and general attitudes towards some activities in those policies and furthermore to examine the suitability of the method of Alho et al. (2001) for the scenic beauty assessment. The study areas consisted of three original, untreated, and 15 modified rural landscapes representing a variety of different activities. The scenic beauty of the landscapes was evaluated through pairwise comparisons of the responses of 68 people. Furthermore, attitudes towards environmental values, water protection, buffer strips and subsidies to agriculture were obtained. The respondents found the maintained buffer strips more pleasing than unmaintained strips and considered that the quality of watercourses was increased by buffer strips along them. A suitable width for the buffer strip along main ditches, brooks and waterways was regarded, on average, to be wider than the current recommendations. Although the opinions of farmers were basically in line with the existing recommendations, farmers' opininons on the second and third most important effects of buffer strips, an increase in weeds and a decrease in cultivated land, clearly differed from those of the other respondents. Afforestation, lack of building maintenance and abandoned fields were considered to be the most important factors impacting rural landscapes. This study indicates that the Finnish Agri-Environmental Protection Schemes have had positive impacts on the visual quality of landscapes. Attitudes towards other impacts are contradictory. This study also showed the improvement of the Alho et al. (2001) method in these kinds of studies relative to other methods of pairwise comparisons.

  1. Coal use in Italy and environmental compatibility

    International Nuclear Information System (INIS)

    1998-01-01

    Fossil fuels have in Italy great importance. In Italy, in terms of environmental protection and for social acceptance, coal has had a real opposition not verified in other countries. Environmental compatibility of coal cycle and related technologies are discussed also consequently at the Kyoto protocol [it

  2. Handbook of Research on Environmental Taxation

    DEFF Research Database (Denmark)

    , their environmental and economic impact and, finally, the larger question of the role of taxation among other policy approaches to environmental protection. Intermixing theory with case studies, the Handbook offers readers lessons that can be applied around the world. It identifies key bodies of research for people......The Handbook of Research on Environmental Taxation captures the state of the art of research on environmental taxation. Written by 36 specialists in environmental taxation from 16 countries, it takes an interdisciplinary and international approach, focusing on issues that are universal to using...... taxation to achieve environmental goals. The Handbook explores the conceptual foundations of environmental taxation, essential elements for designing environmental tax measures, factors that influence the acceptance of environmental taxation, the variety of ways to implement environmental taxes...

  3. Development of a cross-over randomized trial method to determine the acceptability and safety of novel ready-to-use therapeutic foods.

    Science.gov (United States)

    Dibari, Filippo; Bahwere, Paluku; Huerga, Helena; Irena, Abel Hailu; Owino, Victor; Collins, Steve; Seal, Andrew

    2013-01-01

    To develop a method for determining the acceptability and safety of ready-to-use therapeutic foods (RUTF) before clinical trialing. Acceptability was defined using a combination of three consumption, nine safety, and six preference criteria. These were used to compare a soy/maize/sorghum RUTF (SMS-RUTFh), designed for the rehabilitation of human immunodeficiency virus/tuberculosis (HIV/TB) wasted adults, with a peanut-butter/milk-powder paste (P-RUTF; brand: Plumpy'nut) designed for pediatric treatment. A cross-over, randomized, controlled trial was conducted in Kenya. Ten days of repeated measures of product intake by 41 HIV/TB patients, >18 y old, body mass index (BMI) 18-24 kg · m(-2), 250 g were offered daily under direct observation as a replacement lunch meal. Consumption, comorbidity, and preferences were recorded. The study arms had similar age, sex, marital status, initial BMI, and middle upper-arm circumference. No carryover effect or serious adverse events were found. SMS-RUTFh energy intake was not statistically different from the control, when adjusted for BMI on day 1, and the presence of throat sores. General preference, taste, and sweetness scores were higher for SMS-RUTFh compared to the control (P preference criteria for SMS-RUTFh were satisfied except for the average number of days of nausea (0.16 versus 0.09 d) and vomiting (0.04 versus 0.02 d), which occurred with a higher frequency (P < 0.05). SMS-RUTFh appears to be acceptable and can be safely clinically trialed, if close monitoring of vomiting and nausea is included. The method reported here is a useful and feasible approach for testing the acceptability of ready-to-use foods in low income countries. Copyright © 2013 Elsevier Inc. All rights reserved.

  4. Dynamic Flow-through Methods for Metal Fractionation in Environmental Solid Samples

    DEFF Research Database (Denmark)

    Miró, Manuel; Hansen, Elo Harald; Petersen, Roongrat

    occurring processes always take place under dynamic conditions, recent trends have been focused on the development of alternative flow-through dynamic methods aimed at mimicking environmental events more correctly than their classical extraction counterparts. In this lecture particular emphasis is paid......Accummulation of metal ions in different compartments of the biosphere and their possible mobilization under changing environmental conditions induce a pertubation of the ecosystem and may cause adverse health effects. Nowadays, it is widely recognized that the information on total content...... the ecotoxicological significance of metal ions in solid environmental samples. The background of end-over-end fractionation for releasing metal species bound to particular soil phases is initially discussed, its relevant features and limitations being thoroughly described. However, taking into account that naturally...

  5. Internet of Things technology-based management methods for environmental specimen banks.

    Science.gov (United States)

    Peng, Lihong; Wang, Qian; Yu, Ang

    2015-02-01

    The establishment and management of environmental specimen banks (ESBs) has long been a problem worldwide. The complexity of specimen environment has made the management of ESB likewise complex. Through an analysis of the development and management of ESBs worldwide and in light of the sophisticated Internet of Things (IOT) technology, this paper presents IOT technology-based ESB management methods. An IOT technology-based ESB management system can significantly facilitate ESB ingress and egress management as well as long-term storage management under quality control. This paper elaborates on the design of IOT technology-based modules, which can be used in ESB management to achieve standardized, smart, information-based ESB management. ESB management has far-reaching implications for environmental management and for research in environmental science.

  6. Environmental behaviour of tensile membrane structures

    OpenAIRE

    Elnokaly, Amira; Chilton, John; Wilson, Robin

    2002-01-01

    This paper considers the environmental properties of spaces enclosed by tensile membrane structures (TMS). Limitations in the understanding of the environmental and thermal performance of TMS have to some extent hindered their acceptance by building clients and the building industry. A review of the early attempts to model the thermal environment of spaces enclosed by TMS is given and their environmental and thermal properties are discussed. The lack of appropriate tools for the investigation...

  7. Environmental Development Plan (EDP): magnetohydrodynamics program, FY 1977

    International Nuclear Information System (INIS)

    1978-03-01

    This magnetohydrodynamics (MHD) EDP identifies and examines the environmental, health, and safety issues concerning the development of the ERDA Magnetohydrodynamics Program, the environmental activities needed to resolve these issues, applicable ongoing and completed research, and a time-phased action plan for the evaluation and mitigation of environmental impacts. A schedule for environmental research, assessment, and other activities is laid out. The purpose of the EDP is to identify environmental issues and to specify actions to ensure the environmental acceptability of commercial energy technologies being developed by ERDA. The EDP also will assist in coordinating ERDA's environmental activities with those of other government agencies. This document addresses the following technologies associated with ERDA's MHD program: (1) open-cycle magnetohydrodynamics; (2) closed-cycle plasma magnetohydrodynamics; and (3) closed-cycle liquid metal magnetohydrodynamics. The proposed environmental action plan is designed to meet the following objectives: (1) develop methods for monitoring and measuring emissions; (2) characterize air emissions, water effluents, and solid wastes from MHD; (3) determine potential environmental impacts and health hazards associated with MHD; (4) model pollutant transport and transformation; (5) ensure adequate control of pollutant emissions; (6) identify and minimize occupational health and safety hazards; (7) prepare NEPA compliance documents; and (8) assess the environmental, health, and safety impacts of the commercialized industry. This EDP will be updated and revised annually to take into account the progress of technologies toward commercialization, the environmental work accomplished, and the resolution of outstanding environmental issues concerning the technologies

  8. Method for environmental risk analysis of marine terminals, process industry terminals, pipelines and shipping lanes

    Energy Technology Data Exchange (ETDEWEB)

    Nissen-Lie, Torild R.; Aspholm, Ole O. [DNV Energy, Oslo (Norway)

    2008-07-01

    The paper describes a quantitative method for analyzing the environmental risk of marine terminals, process industry terminals, pipelines and shipping lanes. The method has been used both in Norway and elsewhere in the world; calculating the risk for environmental resources as fish, seabirds and waterfowls, marine mammals, otters, sea turtles and salt marches and other shoreline/sub tidal habitats. The environmental risk is the product of the probability of acute releases and the environmental consequences. Consequences for vulnerable species and habitats are calculated based on oil drift modelling results and a consequence matrix consisting of 5-7 consequence parameter and five consequence levels of increasing seriousness. An average consequence level is calculated on basis of defined weighting factors to provide an overall consequence value for each spill scenario for each species/habitat. An environmental risk analysis highlights the hazards that have to be managed in order to run an environmentally sustainable operation and can also provide input to establish cost-effective oil spill response measures. (author)

  9. Regulatory relevant and reliable methods and data for determining the environmental fate of manufactured nanomaterials

    DEFF Research Database (Denmark)

    Baun, Anders; Sayre, Phil; Steinhäuser, Klaus Günter

    2017-01-01

    The widespread use of manufactured nanomaterials (MN) increases the need for describing and predicting their environmental fate and behaviour. A number of recent reviews have addressed the scientific challenges in disclosing the governing processes for the environmental fate and behaviour of MNs,...... data. Gaps do however exist in test methods for environmental fate, such as methods to estimate heteroagglomeration and the tendency for MNs to transform in the environment.......The widespread use of manufactured nanomaterials (MN) increases the need for describing and predicting their environmental fate and behaviour. A number of recent reviews have addressed the scientific challenges in disclosing the governing processes for the environmental fate and behaviour of MNs......, however there has been less focus on the regulatory adequacy of the data available for MN. The aim of this paper is therefore to review data, testing protocols and guidance papers which describe the environmental fate and behaviour of MN with a focus on their regulatory reliability and relevance. Given...

  10. Cost-effective and simple solutions for environmental pollution problems by electrochemical methods

    International Nuclear Information System (INIS)

    Ahmed, R.

    1997-01-01

    Environmental pollution is a worldwide problem and has increased significantly with industrialization, urbanization and population growth and is effecting quality of our air, land and water resources. Pollutants include heavy metals, organic toxic and reactive compounds and toxic gases. Major problems in environmental pollution are monitoring and remediation. Now pollutants include such wide range of elements, compounds and gases and normally one needs a whole range of costly analytical techniques to analyse all the pollutants which only very few institutes can afford to purchased. Equipment for electro analytical techniques are much cheaper than most of the other analytical techniques and are also sensitive and accurate for the analysis of nearly the whole range of pollutants including heavy metal. organic reactive compounds, inorganic elements and compounds and toxic gases. application of electrochemical methods for the analysis of different pollutants are reviewed. after monitoring, remediation in the most important aspect of environmental pollution control. Best way could be to treat the pollutants from different industries in such a way that either these are removed from the waste or converted in to non-toxic compounds before their release into the environment. Among all the other treatment methods, electrochemical methods of utilizing the electron as a clean chemical regent are very attractive. Electrodes in electrochemical reactors are abundantly use for the removal and recycling of toxic metals like Cd, Cu, Ni, Pb, Cr and Zn from the industrial waste after electrodeposition. Electrochemical reactors are also being used for electro oxidation of cyanides and other toxic organic compounds into non-toxic species. Such reactors can, in principal, be applied to any environmental pollution problem where the pollutant can either be electro-reduced or oxidized. Different types of electrochemical reactors are discussed, with a view, of their envisaged used for

  11. Consumer Acceptability Of Irradiated Foods

    International Nuclear Information System (INIS)

    Awoyinka, A.; Akingbohungbe, A.E.

    1994-01-01

    Three commonly used food items; maize, beans and smoked fish were irradiated and consumer acceptability was tested through a questionnaire method. Subjects were residents in Ile-Ife, Nigeria. Respondents attitudes towards the processing and tasting of the food were very positive and the possibility of marketing the foods was suggested by them

  12. Creating the Data Basis for Environmental Evaluations with the Oil Point Method

    DEFF Research Database (Denmark)

    Bey, Niki; Lenau, Torben Anker

    1999-01-01

    In order to support designers in decision-making, some methods have been developed which are based on environmental indicators. These methods, however, can only be used, if indicators for the specific product concept exist and are readily available.Based on this situation, the authors developed a...

  13. Acceptance of Swedish e-health services

    Directory of Open Access Journals (Sweden)

    Mary-Louise Jung

    2010-11-01

    Full Text Available Mary-Louise Jung1, Karla Loria11Division of Industrial Marketing, e-Commerce and Logistics, Lulea University of Technology, SwedenObjective: To investigate older people’s acceptance of e-health services, in order to identify determinants of, and barriers to, their intention to use e-health.Method: Based on one of the best-established models of technology acceptance, Technology Acceptance Model (TAM, in-depth exploratory interviews with twelve individuals over 45 years of age and of varying backgrounds are conducted.Results: This investigation could find support for the importance of usefulness and perceived ease of use of the e-health service offered as the main determinants of people’s intention to use the service. Additional factors critical to the acceptance of e-health are identified, such as the importance of the compatibility of the services with citizens’ needs and trust in the service provider. Most interviewees expressed positive attitudes towards using e-health and find these services useful, convenient, and easy to use.Conclusion: E-health services are perceived as a good complement to traditional health care service delivery, even among older people. These people, however, need to become aware of the e-health alternatives that are offered to them and the benefits they provide.Keywords: health services, elderly, technology, Internet, TAM, patient acceptance, health-seeking behavior

  14. A DOE manual: DOE Methods for Evaluating Environmental and Waste Management Samples

    International Nuclear Information System (INIS)

    Goheen, S.C.; McCulloch, M.; Riley, R.G.

    1994-01-01

    Waste Management inherently requires knowledge of the waste's chemical composition. The waste can often be analyzed by established methods; however, if the samples are radioactive, or are plagued by other complications, established methods may not be feasible. The US Department of Energy (DOE) has been faced with managing some waste types that are not amenable to standard or available methods, so new or modified sampling and analysis methods are required. These methods are incorporated into DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods), which is a guidance/methods document for sampling and analysis activities in support of DOE sites. It is a document generated by consensus of the DOE laboratory staff and is intended to fill the gap within existing guidance documents (e. g., the Environmental Protection Agency's (EPA's) Test Methods for Evaluating Solid Waste, SW-846), which apply to low-level or non-radioactive samples. DOE Methods fills the gap by including methods that take into account the complexities of DOE site matrices. The most recent update, distributed in October 1993, contained quality assurance (QA), quality control (QC), safety, sampling, organic analysis, inorganic analysis, and radioanalytical guidance as well as 29 methods. The next update, which will be distributed in April 1994, will contain 40 methods and will therefore have greater applicability. All new methods are either peer reviewed or labeled ''draft'' methods. Draft methods were added to speed the release of methods to field personnel

  15. Issues affecting the acceptance of hydrogen fuel

    International Nuclear Information System (INIS)

    Schulte, I.; Hart, D.; Vorst, R. van der

    2004-01-01

    While the topic of hydrogen as an alternative vehicle fuel is gaining increasing attention internationally, one significant aspect of its introduction has been given less attention than others: the public acceptance of such a new technology and fuel. After reviewing the existing literature on acceptance, risk perception and customer satisfaction, this paper describes the development of a model that illustrates important aspects in influencing a person's attitude towards a new product. 'Values', 'wants' and 'perception' are the three components found to influence acceptance, they themselves are affected by 'social background' and 'experience'. Suggestions are then given on how to use marketing methods, education projects and product exposure in order to maximise the likelihood of a successful introduction of hydrogen as an alternative fuel. (author)

  16. Factors impacting public acceptance of medical radiation exposure

    International Nuclear Information System (INIS)

    Tsuji, Satsuki; Kanda, Reiko

    2009-01-01

    We undertook a survey to determine the public acceptance of medical radiation exposure throughout Japan, and 1,357 responses (67.9% response rate) were obtained using a two-stage systematic stratified random sampling method. The acceptance of exposure of children was generally similar to that of adults. For each of the attributes, 45-60% of the participants were accepting of exposure for cancer treatment and diagnosis, but only 30% were accepting of exposure for X-ray diagnoses of bone fractures and dental caries. In general, the presence of a child did not markedly affect women's acceptance of exposure. Factor analyses identified 3 factors influencing the acceptance of child exposure: symptomatic diseases to determine treatment, the possibility of high-risk diseases (or major organ diseases), and the association with cancer. Cluster analysis showed 4 clusters: a positive group regarding children's exposure for the diagnosis of bone fractures and dental caries (12.9% of all participants), a positive group for major organ disease and cancer (15.5%), a negative group excluding cancer (55.2%), and a positive group for all cases (16.4%). The cluster distributions revealed that mothers with 10- to 18-year-old firstborn children showed a tendency to accept the medical radiation exposure of their children in all cases. (author)

  17. Public participation in the evaluation of innovative environmental cleanup technology

    International Nuclear Information System (INIS)

    Peterson, T.; McCabe, G.; Serie, P.; Niesen, K.

    1994-08-01

    Technologies for remediation of contamination are urgently needed to clean up US Department of Energy (DOE) sites across the country. DOE is managing a national program to develop, demonstrate, and deploy new technologies with promise to expedite this cleanup. The Integrated Demonstration for Cleanup of Volatile Organic Compounds at Arid Sites (VOC-Arid ID) is one such effort. Time and resources, however, are too limited to be invested in methods of remediation that will never be deployed because they have not been rigorously evaluated or because they face the withering opposition of stakeholders. Therefore the VOC-Arid ID is assessing technology both in terms of its technical effectiveness and its stakeholder acceptability. Only if a technology performs as required and is acceptable to regulators, users of technology, and the public will the VOC-Arid ID recommend its use. What distinguishes public involvement in the VOC-Arid ID is the direct influence stakeholders have on the design of technology demonstrations by working directly with technology developers. Stakeholders participated in defining the criteria with which innovative environmental cleanup technology is being evaluated. The integrated demonstration is committed to providing stakeholders with the information they've indicated they need to reach reasoned judgments about the use of specific cleanup technologies. A guiding principle of the VOC-Arid ID is that stakeholder participation improves the technologies being developed, enhances the acceptance of the technologies, and will lead to the broad and timely deployment of appropriate and effective methods of environmental remediation. The VOC-Arid ID has involved stakeholders from the host demonstration site, Hanford, Washington, and from other and sites where the ID technologies may be deployed

  18. Acceptance of Swedish e-health services

    Science.gov (United States)

    Jung, Mary-Louise; Loria, Karla

    2010-01-01

    Objective: To investigate older people’s acceptance of e-health services, in order to identify determinants of, and barriers to, their intention to use e-health. Method: Based on one of the best-established models of technology acceptance, Technology Acceptance Model (TAM), in-depth exploratory interviews with twelve individuals over 45 years of age and of varying backgrounds are conducted. Results: This investigation could find support for the importance of usefulness and perceived ease of use of the e-health service offered as the main determinants of people’s intention to use the service. Additional factors critical to the acceptance of e-health are identified, such as the importance of the compatibility of the services with citizens’ needs and trust in the service provider. Most interviewees expressed positive attitudes towards using e-health and find these services useful, convenient, and easy to use. Conclusion: E-health services are perceived as a good complement to traditional health care service delivery, even among older people. These people, however, need to become aware of the e-health alternatives that are offered to them and the benefits they provide. PMID:21289860

  19. Consumer Acceptance Analysis of the Home Energy Management System

    Directory of Open Access Journals (Sweden)

    Eung-Suk Park

    2017-12-01

    Full Text Available The purpose of this paper is to study consumer acceptance of the Home Energy Management System, which is the next generation electronic management system that the Korean government plans to implement in households. The Home Energy Management System is a critical device in maximizing the efficiency of electric energy consumption for each household by using a smart grid. Because it can visualize real-time price information on the electricity, households can easily monitor and control the amount of electricity consumption. With this feature, the Home Energy Management System can contribute to consumers’ total energy savings. This is a major reason why the Korean government wishes to implement it nationwide. Since the Home Energy Management System is a product that applies new technology that has not yet been directly encountered by consumers, there may be a difference in the level of public perception of the Home Energy Management System. Therefore, the impact of consumers’ awareness of the Home Energy Management System on their intention to use is important. To do this, the Technology Acceptance Model is utilized in this study. Traditional research on the Technology Acceptance Model includes awareness of usefulness and ease of use as well as intention to use. In contrast, in this research, an extended Technology Acceptance Model with four additional factors—economic benefit, social contribution, environmental responsibility, and innovativeness—that may affect the consumer’s awareness of usefulness and ease of use, is proposed. To collect the data, the survey was conducted with 287 respondents. As a result, the proposed model proved to be suitable in explaining the intention to use with a 70.3% explanation power. It is found that economic benefit (0.231 and innovativeness (0.259 impact on usefulness of the Home Energy Management System. Moreover, usefulness (0.551 has a bigger effect on intention to use than ease of use (0.338 does. Based

  20. Indoor air - assessment: Methods of analysis for environmental carcinogens

    International Nuclear Information System (INIS)

    Peterson, M.R.; Naugle, D.F.; Berry, M.A.

    1990-06-01

    The monograph describes, in a general way, published sampling procedures and analytical approaches for known and suspected carcinogens. The primary focus is upon carcinogens found in indoor air, although the methods described are applicable to other media or environments. In cases where there are no published methods for a particular pollutant in indoor air, methods developed for the workplace and for ambient air are included since they should be adaptable to indoor air. Known and suspected carcinogens have been grouped into six categories for the purposes of this and related work. The categories are radon, asbestos, organic compounds, inorganic species, particles, and non-ionizing radiation. Some methods of assessing exposure that are not specific to any particular pollutant category are covered in a separate section. The report is the fifth in a series of EPA/Environmental Criteria and Assessment Office Monographs

  1. Enlisting qualitative methods to improve environmental monitoring

    Science.gov (United States)

    Environmental monitoring tracks ecological changes in order to support environmental management decisions. Monitoring design is driven by natural scientists, usually lacking a formal social science basis. However, human perspectives drive environmental resource decisions, with ...

  2. Societal acceptance of carbon capture and storage technologies

    International Nuclear Information System (INIS)

    Alphen, Klaas van; Voorst tot Voorst, Quirine van; Hekkert, Marko P.; Smits, Ruud E.H.M.

    2007-01-01

    For the actual implementation of carbon capture and storage (CCS) technologies, societal support is a crucial precondition. This paper describes an extensive study on the acceptance of CCS by stakeholders in the Netherlands and explores one of the determining factors in the acceptance of CCS by the lay public, i.e. the way the Dutch press perceives and portrays CCS. The stakeholder analysis shows that there is a positive attitude towards CCS by industry, government, and environmental NGOs, provided that the conditions they pose on the deployment of CCS are met. The content analysis of Dutch news articles conveys that the media portrayal of CCS is-to a certain extent-a balanced reflection of the way CCS is perceived by the stakeholders. Both analyses show that the concerns about CCS have not overshadowed the main promise that CCS is part of the solution to climate change. However, the current negative aspects of CCS as raised by different stakeholders and the media will remain if no action is taken. Therefore, the conditions posed on the use of CCS, as well as the actions required to meet these conditions, could function as a proxy for the 'societal voice', articulating the most important issues concerning the future acceptance of CCS technology

  3. Guide for: environmental radiological surveillance at US Department of Energy installations

    International Nuclear Information System (INIS)

    Corley, J.P.; Denham, D.H.; Jaquish, R.E.; Michels, D.E.; Olsen, A.R.; Waite, D.A.

    1981-07-01

    This second edition of the Guide, originally published in 1977, is presented as an interim revision and does not contain major changes in content. The original objectives and scope of the Guide have not changed. The Guide is intended to: provide recommended methods, procedures, and performance criteria to bring greater comparability to DOE environmental monitoring and reporting systems; provide DOE management, particularly the Headquarters' Operational and Environmental Safety Division (OESD) and field offices, with a broad review of accepted radiological surveillance practices for use in the evaluation of environmental surveillance programs at DOE facilities; and delineate the capabilities and limitations of the various environmental monitoring systems for radioactivity currently used at DOE sites, including technical areas where there is either an inadequate basis for procedural selection or where further development work may be warranted. The document is intended as a guide, not a manual of detailed mandatory procedure

  4. Sustainability in Organizations: The Application of the Gaia Method for Managing Environmental Impact on a Company

    Directory of Open Access Journals (Sweden)

    Celso Giancarlo Duarte de Mazo

    2015-12-01

    Full Text Available This article demonstrates a method of managing environmental impacts, thus assessing the degree of sustainability of an organization.As an object of study, the GAIA (Gerenciamento de Aspectos e Impactos Ambientais = Management of Environmental Aspects and Impacts method for management of environmental aspects and impacts was used, based on the development of three fundamental stages: awareness, knowledge and training, having been applied to a small company in the baking business. A bibliographical research on business sustainability was carried out so theoretical basis could support field research. By way of a questionnaire and interviews, it was identified that the company has sustainability indicators at a good level, as the GAIA method states. The research presented data that confirm the efficiency of the GAIA method, with the identification of data that make it possible to determine strategies to develop actions that improve the company’s social and environmental sustainability. For future studies, we suggest that the focus of this method be expanded, thus deepening the issue of socioeconomic indicators.

  5. Use and acceptance of long lasting insecticidal net screens for dengue prevention in Acapulco, Guerrero, Mexico.

    Science.gov (United States)

    Jones, Catrin H; Benítez-Valladares, David; Guillermo-May, Guillermo; Dzul-Manzanilla, Felipe; Che-Mendoza, Azael; Barrera-Pérez, Mario; Selem-Salas, Celia; Chablé-Santos, Juan; Sommerfeld, Johannes; Kroeger, Axel; O'Dempsey, Timothy; Medina-Barreiro, Anuar; Manrique-Saide, Pablo

    2014-08-14

    Dengue, recognized by the WHO as the most important mosquito-borne viral disease in the world, is a growing problem. Currently, the only effective way of preventing dengue is vector control. Standard methods have shown limited effect, and there have been calls to develop new integrated vector management approaches. One novel tool, protecting houses with long lasting insecticidal screens on doors and windows, is being trialled in a cluster randomised controlled trial by a joint UADY/WHO TDR/IDRC study in various districts of Acapulco, Mexico, with exceptionally high levels of crime and insecurity.This study investigated the community's perspectives of long lasting insecticidal screens on doors and windows in homes and in schools, in order to ascertain their acceptability, to identify challenges to further implementation and opportunities for future improvements. This was a sequential mixed-methods study. The quantitative arm contained a satisfaction survey administered to 288 houses that had received the intervention examining their perspectives of both the intervention and dengue prevention in general. The qualitative arm consisted of Focus Group Discussions (FGDs) with those who had accepted the intervention and key informant interviews with: schoolteachers to discuss the use of the screens in schools, program staff, and community members who had refused the intervention. Overall satisfaction and acceptance of the screens was very high, with only some operational and technical complaints relating to screen fragility and the installation process. However, the wider social context of urban violence and insecurity was a major barrier to screen acceptance. Lack of information dissemination and community collaboration were identified as project weaknesses. The screens are widely accepted by the population, but the project implementation could be improved by reassuring the community of its legitimacy in the context of insecurity. More community engagement and better

  6. Flexibility-Based Evaluation of Variable Generation Acceptability in Korean Power System

    OpenAIRE

    Chang-Gi Min; Mun-Kyeom Kim

    2017-01-01

    This study proposes an evaluation method for variable generation (VG) acceptability with an adequate level of power system flexibility. In this method, a risk index referred to as the ramping capability shortage expectation (RSE) is used to quantify flexibility. The RSE value of the current power system is selected as the adequate level of flexibility (i.e., RSE criterion). VG acceptability is represented by the VG penetration level for the RSE criterion. The proposed evaluation method was ap...

  7. Determination of 237Np in environmental and nuclear samples: A review of the analytical method

    International Nuclear Information System (INIS)

    Thakur, P.; Mulholland, G.P.

    2012-01-01

    A number of analytical methods has been developed and used for the determination of neptunium in environmental and nuclear fuel samples using alpha, ICP–MS spectrometry, and other analytical techniques. This review summarizes and discusses development of the radiochemical procedures for separation of neptunium (Np), since the beginning of the nuclear industry, followed by a more detailed discussion on recent trends in the separation of neptunium. This article also highlights the progress in analytical methods and issues associated with the determination of neptunium in environmental samples. - Highlights: ► Determination of Np in environmental and nuclear samples is reviewed. ► Various analytical methods used for the determination of Np are listed. ► Progress and issues associated with the determination of Np are discussed.

  8. Progress and development trends of the research on public acceptance for nuclear power

    International Nuclear Information System (INIS)

    Li Jinbin; Fang Chao; Cao Jianzhu

    2014-01-01

    Scientists keep doing the research on public acceptance for nuclear power during tbe period of 30 years from TMI to Fukushima nuclear accidents. In this paper, the research methods on public acceptance for nuclear power are reviewed. The theoretical basis of the research methods (including social investigation and structural equation model), their essence of social psychology as well as the research methods for public nuclear power at different phases are respectively introduced. The current methods are divided into three stages according to the starting time and depth of the research, and their significance for the current research is discussed. Finally, it takes a close look at the trends of the research methods on public acceptance for nuclear power. (authors)

  9. The assessment of the impact of socio-economic factors in accepting cancer using the Acceptance of Illness Scale (AIS

    Directory of Open Access Journals (Sweden)

    Aleksandra I. Czerw

    2015-11-01

    Full Text Available Aim of the study : The paper presents the results of examining the level of acceptance of the illness in cancer patients using the Acceptance of Illness Scale (AIS. Materials and methods: The study involved cancer patients treated at the Central Clinical Hospital of the Ministry the Interior in Warsaw in 2014. The questionnaire comprised basic demographic questions (socio-economic factors and the AIS test estimating the level of illness acceptance in patients. Results : For the group of patients in the research group, the arithmetic mean amounted to 27.56 points. The period of time that elapsed between the first cancer diagnosis and the start of the study did not influence the score of accepting illness. The acceptance of illness in patients diagnosed with metastases differed from the acceptance of illness by patients diagnosed with metastatic cancer. Females obtained the average of 29.59 in the AIS test, whereas the average in male patients was 26.17. The patients’ age did not impact the AIS test. There were no differences in the AIS test results between a group of people with secondary education and a group of people with higher education. There were no differences in the AIS test results between employed individuals versus pensioners. The inhabitants of cities were characterized by the highest degree of acceptance of their health condition. The lowest degree of acceptance of illness was observed in the group with the lowest average incomes. In the group of married individuals the average degree of acceptance of illness amounted to 27.37 points. The average degree of acceptance of illness in patients that declared themselves as single amounted to 25.75. Conclusions : The average degree of acceptance of illness in the study group was 27.56 points, which is a relatively high level of acceptance of cancer. The main socio-economic factor, which influenced the AIS test results was whether metastases were diagnosed or not. There were no

  10. Pesticide Environmental Accounting: a method for assessing the external costs of individual pesticide applications.

    Science.gov (United States)

    Leach, A W; Mumford, J D

    2008-01-01

    The Pesticide Environmental Accounting (PEA) tool provides a monetary estimate of environmental and health impacts per hectare-application for any pesticide. The model combines the Environmental Impact Quotient method and a methodology for absolute estimates of external pesticide costs in UK, USA and Germany. For many countries resources are not available for intensive assessments of external pesticide costs. The model converts external costs of a pesticide in the UK, USA and Germany to Mediterranean countries. Economic and policy applications include estimating impacts of pesticide reduction policies or benefits from technologies replacing pesticides, such as sterile insect technique. The system integrates disparate data and approaches into a single logical method. The assumptions in the system provide transparency and consistency but at the cost of some specificity and precision, a reasonable trade-off for a method that provides both comparative estimates of pesticide impacts and area-based assessments of absolute impacts.

  11. Consideration of the environmental effects on fatigue behavior of austenitic components. Calculation methods and practical application

    International Nuclear Information System (INIS)

    Seichter, Johannes; Reese, Sven H.; Klucke, Dietmar

    2012-01-01

    During the last years environmental effects on the fatigue behavior of nuclear power plant components has worldwide been discussed controversial with respect to the transferability of laboratory data on real components. A publication from Argonne National Laboratory on experimental results concerning environmental effects (air and LWR coolant) on fatigue of austenitic steels included a proposal on calculation methods concerning the lifetime reduction due to environmental effects. This calculation method, i.e. multiplication of the usage factor by a F(en), has been included into the ASME Code, Section III, Division I, as Code Case N-792 (fatigue evaluations including environmental effects). The presented contribution evaluates the practical application of this calculation procedure and demonstrates the determination of the usage factor of an austenitic component under environmental exposure.

  12. Application of Synchrotron Radiation-based Methods for Environmental Biogeochemistry: Introduction to the Special Section

    Energy Technology Data Exchange (ETDEWEB)

    Hettiarachchi, Ganga M.; Donner, Erica; Doelsch, Emmanuel

    2017-01-01

    To understand the biogeochemistry of nutrients and contaminants in environmental media, their speciation and behavior under different conditions and at multiple scales must be determined. Synchrotron radiation-based X-ray techniques allow scientists to elucidate the underlying mechanisms responsible for nutrient and contaminant mobility, bioavailability, and behavior. The continuous improvement of synchrotron light sources and X-ray beamlines around the world has led to a profound transformation in the field of environmental biogeochemistry and, subsequently, to significant scientific breakthroughs. Following this introductory paper, this special collection includes 10 papers that either present targeted reviews of recent advancements in spectroscopic methods that are applicable to environmental biogeochemistry or describe original research studies conducted on complex environmental samples that have been significantly enhanced by incorporating synchrotron radiation-based X-ray technique(s). We believe that the current focus on improving the speciation of ultra-dilute elements in environmental media through the ongoing optimization of synchrotron technologies (e.g., brighter light sources, improved monochromators, more efficient detectors) will help to significantly push back the frontiers of environmental biogeochemistry research. As many of the relevant techniques produce extremely large datasets, we also identify ongoing improvements in data processing and analysis (e.g., software improvements and harmonization of analytical methods) as a significant requirement for environmental biogeochemists to maximize the information that can be gained using these powerful tools.

  13. A state-impact-state methodology for assessing environmental impact in land use planning

    International Nuclear Information System (INIS)

    Chen, Longgao; Yang, Xiaoyan; Chen, Longqian; Potter, Rebecca; Li, Yingkui

    2014-01-01

    The implementation of land use planning (LUP) has a large impact on environmental quality. There lacks a widely accepted and consolidated approach to assess the LUP environmental impact using Strategic Environmental Assessment (SEA). In this paper, we developed a state-impact-state (SIS) model employed in the LUP environmental impact assessment (LUPEA). With the usage of Matter-element (ME) and Extenics method, the methodology based on the SIS model was established and applied in the LUPEA of Zoucheng County, China. The results show that: (1) this methodology provides an intuitive and easy understanding logical model for both the theoretical analysis and application of LUPEA; (2) the spatial multi-temporal assessment from base year, near-future year to planning target year suggests the positive impact on the environmental quality in the whole County despite certain environmental degradation in some towns; (3) besides the spatial assessment, other achievements including the environmental elements influenced by land use and their weights, the identification of key indicators in LUPEA, and the appropriate environmental mitigation measures were obtained; and (4) this methodology can be used to achieve multi-temporal assessment of LUP environmental impact of County or Town level in other areas. - Highlights: • A State-Impact-State model for Land Use Planning Environmental Assessment (LUPEA). • Matter-element (ME) and Extenics methods were embedded in the LUPEA. • The model was applied to the LUPEA of Zoucheng County. • The assessment shows improving environment quality since 2000 in Zoucheng County. • The method provides a useful tool for the LUPEA in the county level

  14. A state-impact-state methodology for assessing environmental impact in land use planning

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Longgao [Institute of land resources, Jiangsu Normal University, Xuzhou 221116 (China); Yang, Xiaoyan [Institute of land resources, Jiangsu Normal University, Xuzhou 221116 (China); School of Environmental Science and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116 (China); Chen, Longqian, E-mail: cumt_chenlongqian@163.com [School of Environmental Science and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116 (China); Potter, Rebecca; Li, Yingkui [Department of Geography, University of Tennessee, Knoxville, TN 37996 (United States)

    2014-04-01

    The implementation of land use planning (LUP) has a large impact on environmental quality. There lacks a widely accepted and consolidated approach to assess the LUP environmental impact using Strategic Environmental Assessment (SEA). In this paper, we developed a state-impact-state (SIS) model employed in the LUP environmental impact assessment (LUPEA). With the usage of Matter-element (ME) and Extenics method, the methodology based on the SIS model was established and applied in the LUPEA of Zoucheng County, China. The results show that: (1) this methodology provides an intuitive and easy understanding logical model for both the theoretical analysis and application of LUPEA; (2) the spatial multi-temporal assessment from base year, near-future year to planning target year suggests the positive impact on the environmental quality in the whole County despite certain environmental degradation in some towns; (3) besides the spatial assessment, other achievements including the environmental elements influenced by land use and their weights, the identification of key indicators in LUPEA, and the appropriate environmental mitigation measures were obtained; and (4) this methodology can be used to achieve multi-temporal assessment of LUP environmental impact of County or Town level in other areas. - Highlights: • A State-Impact-State model for Land Use Planning Environmental Assessment (LUPEA). • Matter-element (ME) and Extenics methods were embedded in the LUPEA. • The model was applied to the LUPEA of Zoucheng County. • The assessment shows improving environment quality since 2000 in Zoucheng County. • The method provides a useful tool for the LUPEA in the county level.

  15. Tentative reference method for measurement of tritium in environmental waters. Environmental monitoring series

    International Nuclear Information System (INIS)

    1975-12-01

    A tentative reference method for the measurement of tritium in potable and nonpotable environmental water is described. Water samples are treated with sodium hydroxide and potassium permanganate and then a water fraction is separated from interferences by distillation. Two distillation procedures are described, a simple aqueous distillation for samples from potable water sources, and an aqueous-azeotropic-benzene distillation for nonpotable water sources. Alliquots of a designated distillate fraction are measured for tritium activity by liquid scintillation detection. Distillation recovery and counting efficiency factors are determined with tritium standards. Results are reported in picocuries per milliliter

  16. Journal of Environmental Extension: Submissions

    African Journals Online (AJOL)

    Journal of Environmental Extension is purely academic and accepts positional or ... and so responsibility for the content and macro formatting remain of the author. ... For research articles, the methodology, result analysis (statistical tests to be ...

  17. The complementary use of radioanalytical methods and trace analysis methods for the characterisation of environmental IAEA reference materials

    International Nuclear Information System (INIS)

    De Regge, P.; Burns, K.; Campbell, M.; Makarewicz, M.; Markowicz, A.; Mattiuzzi, M.; Tajani, A.; Toervenyi, A.; Zeiller, E.

    2001-01-01

    The IAEA laboratories have access to both nuclear analytical methods and conventional instrumental methods for trace analysis for the characterisation of its environmental and biological reference materials. A technical concept integrating the homogeneity data, the recommended test portion mass and the uncertainty on the trace element concentrations is explored using a combination of INAA, XRF, ICP-MS, ICP-AES, and AAS. The above approach is illustrated by selected examples of reference materials currently under evaluation for their trace element content. They include some or all of the following elements Al, As, Br, Ca, Cd, Co, Cr, Cs, Cu, Fe, Hg, K, Mg, Mn, Mo, Na, Ni, Pb, Rb, Se, Sr, Th, U, Zn in environmental biomonitor organisms (lichen, algae) and air dust filters. (author)

  18. Recording environmental assets in the national accounts

    OpenAIRE

    Carl Obst; Michael Vardon

    2014-01-01

    Accounting information is a core element of economic decision-making at both national and corporate levels. It is widely accepted that much economic activity is dependent upon natural capital and natural resources—generically termed environmental assets in an accounting context. Environmental assets are under threat of depletion and degradation from economic activity. Consequently, the incorporation of information on environmental assets into standard accounting frameworks is an essential ele...

  19. Environmental Compliance Management System

    International Nuclear Information System (INIS)

    Brownson, L.W.; Krsul, T.; Peralta, R.A.; Knudson, D.A.; Rosignolo, C.L.

    1992-01-01

    Argonne National Laboratory (ANL) is developing the Environmental Compliance Management System (ECMS) as a comprehensive, cost-effective tool to ensure (1) that the Laboratory complies with all applicable federal and state environmental laws and regulations, (2) that environmental issues and concerns are recognized and considered in the early phases of projects; and (3) that Laboratory personnel conduct Laboratory operations in the most environmentally acceptable manner. The ECMS is an expert computer system which is designed to allow project engineers to perform an environmental evaluation of their projects. The system includes a Master Program which collects basic project information, provide utility functions, and access the environmental expert modules, environmental expert system modules for each federal and state environmental law which allows the user to obtain specific information on how an individual law may affect his project; and site-specific databases which contain information necessary for effective management of the site under environmental regulations. The ECMS will have the capability to complete and print many of the necessary environmental forms required by federal and state agencies, including the Department of Energy

  20. A method to investigate drivers' acceptance of Blind Spot Detection System®.

    Science.gov (United States)

    Piccinini, Giuliofrancesco; Simões, Anabela; Rodrigues, Carlos Manuel; Leitão, Miguel

    2012-01-01

    Lately, with the goal of improving road safety, car makers developed and commercialised some Advanced Driver Assistance Systems (ADAS) which, through the detection of blind spot areas on the vehicle's sides, could help the drivers during the overtaking and the change lane task. Despite the possible benefits to reduce lateral crashes, the overall impact on road safety of such systems have not been deeply studied yet; notably, despite some researches have been carried out, there is a lack of studies regarding the long-term usage and drivers' acceptance of those systems. In order to fill the research gap, a methodology, based on the combination of focus groups interviews, questionnaires and a small-scale field operational test (FOT), has been designed in this study; such a methodology aims at evaluating drivers' acceptance of Blind Spot Information System® and at proposing some ideas to improve the usability and user-friendliness of this (or similar) device in their future development.

  1. Alternative Testing Methods for Predicting Health Risk from Environmental Exposures

    Directory of Open Access Journals (Sweden)

    Annamaria Colacci

    2014-08-01

    Full Text Available Alternative methods to animal testing are considered as promising tools to support the prediction of toxicological risks from environmental exposure. Among the alternative testing methods, the cell transformation assay (CTA appears to be one of the most appropriate approaches to predict the carcinogenic properties of single chemicals, complex mixtures and environmental pollutants. The BALB/c 3T3 CTA shows a good degree of concordance with the in vivo rodent carcinogenesis tests. Whole-genome transcriptomic profiling is performed to identify genes that are transcriptionally regulated by different kinds of exposures. Its use in cell models representative of target organs may help in understanding the mode of action and predicting the risk for human health. Aiming at associating the environmental exposure to health-adverse outcomes, we used an integrated approach including the 3T3 CTA and transcriptomics on target cells, in order to evaluate the effects of airborne particulate matter (PM on toxicological complex endpoints. Organic extracts obtained from PM2.5 and PM1 samples were evaluated in the 3T3 CTA in order to identify effects possibly associated with different aerodynamic diameters or airborne chemical components. The effects of the PM2.5 extracts on human health were assessed by using whole-genome 44 K oligo-microarray slides. Statistical analysis by GeneSpring GX identified genes whose expression was modulated in response to the cell treatment. Then, modulated genes were associated with pathways, biological processes and diseases through an extensive biological analysis. Data derived from in vitro methods and omics techniques could be valuable for monitoring the exposure to toxicants, understanding the modes of action via exposure-associated gene expression patterns and to highlight the role of genes in key events related to adversity.

  2. Consumer acceptance of irradiated food: theory and reality

    International Nuclear Information System (INIS)

    Bruhn, Christine M.

    1998-01-01

    For years most consumers have expressed less concern about food irradiation than other food processing technologies. Attitude studies have demonstrated that when given science-based information, from 60% to 90% of consumers prefer the advantages irradiation processing provides. When information is accompanied by samples, acceptance may increase to 99%. Information on irradiation should include product benefits, safety and wholesomeness, address environmental safety issues, and include endorsements by recognized health authorities. Educational and marketing programs should now be directed toward retailers and processors. Given the opportunity, consumers will buy high quality, safety-enhanced irradiated food

  3. Bridging the Gap between Social Acceptance and Ethical Acceptability

    NARCIS (Netherlands)

    Taebi, B.

    2016-01-01

    New technology brings great benefits, but it can also create new and significant risks. When evaluating those risks in policymaking, there is a tendency to focus on social acceptance. By solely focusing on social acceptance, we could, however, overlook important ethical aspects of technological

  4. Factors Influencing the Acceptance of Web-Based Training in Malaysia: Applying the Technology Acceptance Model

    Science.gov (United States)

    Hashim, Junaidah

    2008-01-01

    Companies in Malaysia are beginning to use web-based training to reduce the cost of training and to provide employees with greater access to instruction. However, some people are uncomfortable with technology and prefer person-to-person methods of training. This study examines the acceptance of web-based training among a convenience sample of 261…

  5. Video Game Acceptance: A Meta-Analysis of the Extended Technology Acceptance Model.

    Science.gov (United States)

    Wang, Xiaohui; Goh, Dion Hoe-Lian

    2017-11-01

    The current study systematically reviews and summarizes the existing literature of game acceptance, identifies the core determinants, and evaluates the strength of the relationships in the extended technology acceptance model. Moreover, this study segments video games into two categories: hedonic and utilitarian and examines player acceptance of these two types separately. Through a meta-analysis of 50 articles, we find that perceived ease of use (PEOU), perceived usefulness (PU), and perceived enjoyment (PE) significantly associate with attitude and behavioral intention. PE is the dominant predictor of hedonic game acceptance, while PEOU and PU are the main determinants of utilitarian game acceptance. Furthermore, we find that respondent type and game platform are significant moderators. Findings of this study provide critical insights into the phenomenon of game acceptance and suggest directions for future research.

  6. The determination of Sr-90 in environmental material using an improved rapid method

    International Nuclear Information System (INIS)

    Ghods, A.; Veselsky, J.C.; Zhu, S.; Mirna, A.; Schelenz, R.

    1989-01-01

    A short report on strontium 90, its occurrence in the biosphere and its rapid determination methods is given. Classification of determination methods suitable for various environmental and biological materials is established. Interference due to Y-91 and a method to eliminate the activity of Y-90 and Y-91 is discussed. Tabs

  7. Comparative analysis of methods for integrating various environmental impacts as a single index in life cycle assessment

    International Nuclear Information System (INIS)

    Ji, Changyoon; Hong, Taehoon

    2016-01-01

    Previous studies have proposed several methods for integrating characterized environmental impacts as a single index in life cycle assessment. Each of them, however, may lead to different results. This study presents internal and external normalization methods, weighting factors proposed by panel methods, and a monetary valuation based on an endpoint life cycle impact assessment method as the integration methods. Furthermore, this study investigates the differences among the integration methods and identifies the causes of the differences through a case study in which five elementary school buildings were used. As a result, when using internal normalization with weighting factors, the weighting factors had a significant influence on the total environmental impacts whereas the normalization had little influence on the total environmental impacts. When using external normalization with weighting factors, the normalization had more significant influence on the total environmental impacts than weighing factors. Due to such differences, the ranking of the five buildings varied depending on the integration methods. The ranking calculated by the monetary valuation method was significantly different from that calculated by the normalization and weighting process. The results aid decision makers in understanding the differences among these integration methods, and, finally, help them select the method most appropriate for the goal at hand.

  8. Comparative analysis of methods for integrating various environmental impacts as a single index in life cycle assessment

    Energy Technology Data Exchange (ETDEWEB)

    Ji, Changyoon, E-mail: changyoon@yonsei.ac.kr; Hong, Taehoon, E-mail: hong7@yonsei.ac.kr

    2016-02-15

    Previous studies have proposed several methods for integrating characterized environmental impacts as a single index in life cycle assessment. Each of them, however, may lead to different results. This study presents internal and external normalization methods, weighting factors proposed by panel methods, and a monetary valuation based on an endpoint life cycle impact assessment method as the integration methods. Furthermore, this study investigates the differences among the integration methods and identifies the causes of the differences through a case study in which five elementary school buildings were used. As a result, when using internal normalization with weighting factors, the weighting factors had a significant influence on the total environmental impacts whereas the normalization had little influence on the total environmental impacts. When using external normalization with weighting factors, the normalization had more significant influence on the total environmental impacts than weighing factors. Due to such differences, the ranking of the five buildings varied depending on the integration methods. The ranking calculated by the monetary valuation method was significantly different from that calculated by the normalization and weighting process. The results aid decision makers in understanding the differences among these integration methods, and, finally, help them select the method most appropriate for the goal at hand.

  9. Improvement of Accuracy in Environmental Dosimetry by TLD Cards Using Three-dimensional Calibration Method

    Directory of Open Access Journals (Sweden)

    HosseiniAliabadi S. J.

    2015-06-01

    Full Text Available Background: The angular dependency of response for TLD cards may cause deviation from its true value on the results of environmental dosimetry, since TLDs may be exposed to radiation at different angles of incidence from the surrounding area. Objective: A 3D setting of TLD cards has been calibrated isotropically in a standard radiation field to evaluate the improvement of the accuracy of measurement for environmental dosimetry. Method: Three personal TLD cards were rectangularly placed in a cylindrical holder, and calibrated using 1D and 3D calibration methods. Then, the dosimeter has been used simultaneously with a reference instrument in a real radiation field measuring the accumulated dose within a time interval. Result: The results show that the accuracy of measurement has been improved by 6.5% using 3D calibration factor in comparison with that of normal 1D calibration method. Conclusion: This system can be utilized in large scale environmental monitoring with a higher accuracy

  10. The Extraction of Heavy Metals by Means of a New Electrolytic Method

    International Nuclear Information System (INIS)

    Guiragossian, Z. G.; Martoyan, G. A.; Injeyan, S. G.; Tonikyan, S. G.; Nalbandyan, G. G.

    2003-01-01

    The extraction of metals in known metallurgical methods is pursued on the basis of separating as much as possible the desired metal's content from the ore concentrate, in the most economical manner. When these principles are also applied to the extraction of heavy metals, the related environmental factors do not readily meet with requirements. Today, an acceptable extraction technology for metals must satisfy the need to produce the deep separation of metals from their source in both economical and environmentally safe manner. This pertains to the direction of our ongoing research and development, among others in the field of environmental remediation. Earlier, we successfully addressed in an environmentally safe manner the selective extraction of radioactive isotopes from liquid radioactive wastes, produced at Armenia's Metzamor Nuclear Power Plant and implemented a functioning LRW station at the NPP. Currently, we extended our new electrodialysis-based electrolytic method in a laboratory scale, for the extraction and deep separation of different metals, including the heavy metals. Our new method, its efficiency, economy and full compliance with environmental issues will be presented

  11. Incorporating environmental justice into environmental decision making

    Energy Technology Data Exchange (ETDEWEB)

    Wolfe, A.K.; Vogt, D.P.; Hwang, Ho-Ling [Oak Ridge National Lab., TN (United States)] [and others

    1995-07-01

    Executive Order 12898, signed on February 11, 1994, broadly states that federal activities, programs, and policies should not produce disproportionately high and adverse impacts on minority and low-income populations. Moreover, the Order indicates that these populations should not be denied the benefits of, or excluded from participation in, these activities, programs, and policies. Because a presidential memorandum accompanying the order said that National Environmental Policy Act (NEPA) documents should begin to address environmental justice immediately, much attention has been paid to assessment-related issues. Also important, a topic that appears to have received relatively little attention, is how decision makers should be expected to use information about environmental justice in their decision making. This paper discusses issues surrounding the use of environmental justice information in the decision-making process by focusing on the following five main topics: (1) the importance, or weight, attached to environmental justice within larger decision-making contexts; (2) the potential tension between localized environmental justice issues and regional or national issues and needs; (3) the use of environmental justice information to develop (perhaps in concert with affected minority and low-income communities) appropriate mitigation strategies, or to establish conditions under which activities, programs, and policies may be accepted locally; (4) the general implications of shifting the distribution of broadly defined risks, costs, and benefits among different population groups; and (5) the implications of implementing environmental justice on an individual, ad hoc basis rather than within a larger environmental justice framework. This paper raises the issues and discusses the implications of alternative approaches to them.

  12. Effects of disciplinary cultures of researchers and research trainees on the acceptability of nanocarriers for drug delivery in different contexts of use: a mixed-methods study

    International Nuclear Information System (INIS)

    Chenel, Vanessa; Boissy, Patrick; Cloarec, Jean-Pierre; Patenaude, Johane

    2015-01-01

    The acceptability of nanomedical applications, which have the potential to generate ethical and societal impacts, is a significant factor in the deployment of nanomedicine. A lack of fit between nanomedical applications and society’s values may result from a partial consideration of such impacts. New approaches for technological evaluation focused on impact perception, acceptance, and acceptability are needed to go beyond traditional technology assessment approaches used with nanotechnology, which focus mainly on toxicological and safety criteria. Using a new evaluative approach based on perceived impacts of nanotechnology, the objective of this study was to assess perceptions among researchers and research trainees familiar with emergent technologies and from different disciplinary background the scope of acceptability judgments made towards the use of nanocarriers. This mixed-methods study was based on scenarios presenting two types of drug-delivery nanocarriers (carbon, synthetic DNA) in two contexts of use (lung cancer treatment, seasonal flu treatment). Researchers and research trainees in the natural sciences and engineering, and the social sciences and the humanities were invited by email to take part in this project. An online questionnaire followed by semi-directed interviews allowed characterization of disciplinary divergences regarding to impact perception, acceptance, and acceptability of the scenarios. The results suggest that impact perception is influenced by disciplinary culture. Also, trends can be seen between respondents’ profiles and variables of acceptance and acceptability, and certain components of the acceptability judgement are specific to each disciplinary culture. The acknowledgment and consideration of these disciplinary divergences could allow, among others, for opening up interdisciplinary dialogue on matters related to the acceptability of nanomedical applications and their developments

  13. Effects of disciplinary cultures of researchers and research trainees on the acceptability of nanocarriers for drug delivery in different contexts of use: a mixed-methods study

    Energy Technology Data Exchange (ETDEWEB)

    Chenel, Vanessa; Boissy, Patrick, E-mail: patrick.boissy@usherbrooke.ca [Université de Sherbrooke, Interdisciplinary Institute for Technological Innovation (3IT) (Canada); Cloarec, Jean-Pierre [Université de Sherbrooke, Laboratoire Nanotechnologies et Nanosystèmes (LN2), Centre National de la Recherche Scientifique (CNRS) (Canada); Patenaude, Johane [Université de Sherbrooke, Interdisciplinary Institute for Technological Innovation (3IT) (Canada)

    2015-04-15

    The acceptability of nanomedical applications, which have the potential to generate ethical and societal impacts, is a significant factor in the deployment of nanomedicine. A lack of fit between nanomedical applications and society’s values may result from a partial consideration of such impacts. New approaches for technological evaluation focused on impact perception, acceptance, and acceptability are needed to go beyond traditional technology assessment approaches used with nanotechnology, which focus mainly on toxicological and safety criteria. Using a new evaluative approach based on perceived impacts of nanotechnology, the objective of this study was to assess perceptions among researchers and research trainees familiar with emergent technologies and from different disciplinary background the scope of acceptability judgments made towards the use of nanocarriers. This mixed-methods study was based on scenarios presenting two types of drug-delivery nanocarriers (carbon, synthetic DNA) in two contexts of use (lung cancer treatment, seasonal flu treatment). Researchers and research trainees in the natural sciences and engineering, and the social sciences and the humanities were invited by email to take part in this project. An online questionnaire followed by semi-directed interviews allowed characterization of disciplinary divergences regarding to impact perception, acceptance, and acceptability of the scenarios. The results suggest that impact perception is influenced by disciplinary culture. Also, trends can be seen between respondents’ profiles and variables of acceptance and acceptability, and certain components of the acceptability judgement are specific to each disciplinary culture. The acknowledgment and consideration of these disciplinary divergences could allow, among others, for opening up interdisciplinary dialogue on matters related to the acceptability of nanomedical applications and their developments.

  14. Methods and issues in conducting a community-based environmental randomized trial

    International Nuclear Information System (INIS)

    Swartz, Lee J.; Callahan, Karen A.; Butz, Arlene M.; Rand, Cynthia S.; Kanchanaraksa, Sukon; Diette, Gregory B.; Krishnan, Jerry A.; Breysse, Patrick N.; Buckley, Timothy J.; Mosley, Adrian M.; Eggleston, Peyton A.

    2004-01-01

    The environment is suspected to play an important role in the prevalence and severity of asthma in inner-city children. This paper describes the implementation and baseline data of an inner-city community-based participatory research clinical trial designed to test the effectiveness of a pollutant and allergen control strategy on children's asthma morbidity. Participants were 100 elementary-school-aged children with asthma, graduates of a school-based asthma education program in East Baltimore. The intervention for half of the randomly assigned families consisted of environmental control education, allergen-proof encasements, pest extermination, and a HEPA air cleaner at the beginning of the study. Controls received the same at the end of the study. Participants visited a clinic for questionnaires, allergy skin testing, spirometry, and blood sample at baseline and 12 months. Home environments, NO 2 , O 3 , airborne particulates, and allergens were evaluated at baseline and at 6 and 12 months. Asthma morbidity and adherence was assessed quarterly. Collaboration with the community proved very beneficial in creating a study design and procedures acceptable to an inner-city community

  15. Environmentally-friendly product development: methods and tools

    National Research Council Canada - National Science Library

    Abele, Eberhard; Anderl, R; Birkhofer, Herbert

    2005-01-01

    ... to assess a product's environmental effects. Fig. 1. Vision of Environment as a key target for product development vvi Preface Product related environmental issues are getting more and more political and public awareness. Development of environmentally friendly products has become an action item for both, politics and industry (UNFCCC 1997). Energy...

  16. (Environmental and geophysical modeling, fracture mechanics, and boundary element methods)

    Energy Technology Data Exchange (ETDEWEB)

    Gray, L.J.

    1990-11-09

    Technical discussions at the various sites visited centered on application of boundary integral methods for environmental modeling, seismic analysis, and computational fracture mechanics in composite and smart'' materials. The traveler also attended the International Association for Boundary Element Methods Conference at Rome, Italy. While many aspects of boundary element theory and applications were discussed in the papers, the dominant topic was the analysis and application of hypersingular equations. This has been the focus of recent work by the author, and thus the conference was highly relevant to research at ORNL.

  17. Metal speciation: survey of environmental methods of analysis

    Energy Technology Data Exchange (ETDEWEB)

    Mach, M.H.; Nott, B.; Scott, J.W.; Maddalone, R.F.; Whiddon, N.T. [TRW, Redondo Beach, CA (United States). Chemistry Technology Dept.

    1996-07-01

    As part of a recent task under the EPRI Analytical Methods Qualification Program (RP 1851), TRW has surveyed the methods available for monitoring metal species in typical utility aqueous discharge streams. Methods for determining the individual species of these metals can become important in a regulatory sense as the EPA transitions to assessment of environmental risk based on bioavailability. For example, EPA considers methyl mercury and Cr(VI) much more toxic to the aquatic environment than inorganic mercury or Cr(III). The species of a given element can also differ in their transport and bioaccumulation. Methods for speciation generally include a selective separation step followed by standard metals analysis. Speciation, therefore, is mainly derived from the separation step and not from the method of final quantisation. Examples of separation/analysis include: selective extraction followed by graphite furnace atomic absorption or ICP-MS; separation by GC followed by metals detection; chelation and/or direct separation by LC followed by UV measurement or metals detection; and ion chromatography with conductivity, UV, or metals detection. There are a number of sampling issues associated with metal species such as stabilization (maintaining oxidation state), absorption, and filtration that need to be addressed in order to obtain and maintain a representative sample for analysis. 45 refs., 1 tab.

  18. Logotherapy Counseling to Improve Acceptance of Broken Home Child

    Directory of Open Access Journals (Sweden)

    Erwin Erlangga

    2017-08-01

    Full Text Available This study aims to increase the enrollment of children of a broken home that life has meaning. Subjects are 100 children in Demak whose families experiencing divorce. Research themes include three things: individual counseling, engineering logotherapy, reception, and a child of a broken home. Data obtained based on interviews, observation, and psychological scale showed that of the 100 children of a broken home has a low acceptance that individual counseling with logotherapy techniques were considered appropriate to increase the enrollment of children of a broken home. Factors - factors that affect the acceptance of a child of a broken home is self-blame, anger and did not have a purpose in life again. In addition the environment is also a significant effect on the enrollment of children of a broken home. Environmental labeling of families experiencing divorce as a family that failed so that children are increasingly stressed with the stamp of the community. Based on the field test results, the level of acceptance of the child of a broken home increases after the individual is given counseling services with logotherapy techniques. Indicated by changes in the level of acceptance of children of a broken home before being given treatment (initial evaluation and after (final evaluation of 130 points. The results of effectiveness test statistic t test calculations also showed 0,010 <0.05.It was concluded that counseling individuals with logotherapy effective technique to increase the enrollment of children of a broken home

  19. Affective imagery and acceptance of replacing nuclear power plants.

    Science.gov (United States)

    Keller, Carmen; Visschers, Vivianne; Siegrist, Michael

    2012-03-01

    This study examined the relationship between the content of spontaneous associations with nuclear power plants and the acceptance of using new-generation nuclear power plants to replace old ones. The study also considered gender as a variable. A representative sample of the German- and French-speaking population of Switzerland (N= 1,221) was used. Log-linear models revealed significant two-way interactions between the association content and acceptance, association content and gender, and gender and acceptance. Correspondence analysis revealed that participants who were opposed to nuclear power plants mainly associated nuclear power plants with risk, negative feelings, accidents, radioactivity, waste disposal, military use, and negative consequences for health and environment; whereas participants favoring nuclear power plants mainly associated them with energy, appearance descriptions of nuclear power plants, and necessity. Thus, individuals opposing nuclear power plants had both more concrete and more diverse associations with them than people who were in favor of nuclear power plants. In addition, participants who were undecided often mentioned similar associations to those participants who were in favor. Males more often expressed associations with energy, waste disposal, and negative health effects. Females more often made associations with appearance descriptions, negative feelings, and negative environmental effects. The results further suggest that acceptance of replacing nuclear power plants was higher in the German-speaking part of the country, where all of the Swiss nuclear power plants are physically located. Practical implications for risk communication are discussed. © 2011 Society for Risk Analysis.

  20. Background information for the Leaching environmental Assessment Framework (LEAF) test methods

    Science.gov (United States)

    The U.S. Environmental Protection Agency Office of Resource Conservation and Recovery has initiated the review and validation process for four leaching tests under consideration for inclusion into SW-846: Method 1313 "Liquid-Solid Partitioning as a Function of Extract pH for Co...

  1. The role of interdisciplinary collaboration for stated preference methods to value marine environmental goods and ecosystem services

    NARCIS (Netherlands)

    Börger, Tobias; Bohnke-Henrichs, Anne; Hattam, Caroline; Piwowarczyk, Joanna; Schasfoort, Femke; Austen, Melanie C.

    2018-01-01

    With the increasing use of environmental valuation methods in coastal, marine and deep-sea settings, there is a growing need for the collaboration of natural scientists and environmental economists. Stated preference valuation methods in particular need to be based on sound natural science

  2. Role of continual environmental performance improvement in achieving sustainability in uranium production

    International Nuclear Information System (INIS)

    Jarrell, J.P.; Chad, G.M.S.

    2002-01-01

    Although the term sustainable development is commonly used today, there is not yet a commonly accepted definition. Various ways of measuring sustainability have been proposed. To show how these issues are being effectively addressed in modern uranium developments, we will review some methods of defining the environmental component of sustainable development in the mining and mineral-processing sector. Environmental impacts associated with uranium extraction and processing in modern facilities are modest. Air and water emissions are well controlled. Waste materials are subject to comprehensive management programmes. The size of the impacted area is smaller than in other energy sectors, providing good opportunity to minimize land impact. Experience over the past three decades facilitated gradual, persistent, but cumulatively significant environmental improvements in the uranium production sector. Cameco's uranium mining and processing facilities exemplify these improvements. These improvements can be expected to continue, supporting our argument of Cameco's environmental sustainability. (author)

  3. Validation of the Spanish version of the Chronic Pain Acceptance Questionnaire (CPAQ for the assessment of acceptance in fibromyalgia

    Directory of Open Access Journals (Sweden)

    Luciano Juan V

    2010-04-01

    Full Text Available Abstract Background The aim of this study was to validate a Spanish version of the Chronic Pain Acceptance Questionnaire (CPAQ. Pain acceptance is the process of giving up the struggle with pain and learning to live a worthwhile life despite it. The Chronic Pain Acceptance Questionnaire (CPAQ is the questionnaire most often used to measure pain acceptance in chronic pain populations. Methods A total of 205 Spanish patients diagnosed with fibromyalgia syndrome who attended our pain clinic were asked to complete a battery of psychometric instruments: the Pain Visual Analogue Scale (PVAS for pain intensity, the Hospital Anxiety and Depression Scale (HADS, the Medical Outcome Study Short Form 36 (SF-36, the Pain Catastrophising Scale (PCS and the Fibromyalgia Impact Questionnaire (FIQ. Results Analysis of results showed that the Spanish CPAQ had good test-retest reliability (intraclass correlation coefficient 0.83 and internal consistency reliability (Cronbach's α: 0.83. The Spanish CPAQ score significantly correlated with pain intensity, anxiety, depression, pain catastrophising, health status and physical and psychosocial disability. The Scree plot and a Principal Components Factor analysis confirmed the same two-factor construct as the original English CPAQ. Conclusion The Spanish CPAQ is a reliable clinical assessment tool with valid construct validity for the acceptance measurement among a sample of Spanish fibromyalgia patients. This study will make it easier to assess pain acceptance in Spanish populations with fibromyalgia.

  4. Acceptance criteria for the ITER divertor vertical target

    International Nuclear Information System (INIS)

    Fouquet, S.; Schlosser, J.; Merola, M.; Durocher, A.; Escourbiac, F.; Grosman, A.; Missirlian, M.; Portafaix, C.

    2006-01-01

    In the frame of the toroidal pump limiter fabrication for Tore Supra, CEA developed a large experience of infrared test for acceptance of high heat flux components armoured with carbon fibre composite flat tiles. The test is based on a thermal transient induced by an alternative hot/cold water flow in the heat sink structure. The tile surface temperature transients are compared with those of a reference element, the maximum difference for each tile leading to a value called ΔT ref m ax . This method is proposed for the commissioning of plasma facing components for the ITER divertor vertical target. This paper describes the determination of the best acceptance criteria for the 'monoblock' geometry of the carbon part. First, it has been shown that the location and the extension of the defects could reliably be determined by monitoring both top and lateral surfaces during the test. Second, it was possible to fix an acceptance method based on ΔT ref m ax . Samples with calibrated defects are now under fabrication to validate the results

  5. Structural acceptance criteria Remote Handling Building Tritium Extraction Facility

    Energy Technology Data Exchange (ETDEWEB)

    Mertz, G.

    1999-12-16

    This structural acceptance criteria contains the requirements for the structural analysis and design of the Remote Handling Building (RHB) in the Tritium Extraction Facility (TEF). The purpose of this acceptance criteria is to identify the specific criteria and methods that will ensure a structurally robust building that will safely perform its intended function and comply with the applicable Department of Energy (DOE) structural requirements.

  6. Structural acceptance criteria Remote Handling Building Tritium Extraction Facility

    International Nuclear Information System (INIS)

    Mertz, G.

    1999-01-01

    This structural acceptance criteria contains the requirements for the structural analysis and design of the Remote Handling Building (RHB) in the Tritium Extraction Facility (TEF). The purpose of this acceptance criteria is to identify the specific criteria and methods that will ensure a structurally robust building that will safely perform its intended function and comply with the applicable Department of Energy (DOE) structural requirements

  7. SORIOS – A method for evaluating and selecting environmental certificates and labels

    DEFF Research Database (Denmark)

    Kikkenborg Pedersen, Dennis; Dukovska-Popovska, Iskra; Ola Strandhagen, Jan

    2012-01-01

    This paper presents a general method for evaluating and selecting environmental certificates and labels for companies to use on products and services. The method is developed based on a case study using a Grounded Theory approach. The result is a generalized six-step method that features an initial...... searching strategy and an evaluation model that weighs the prerequisites, rewards and the organization of certificate or label against the strategic needs of a company....

  8. Acceptance of an assistive robot in older adults: a mixed-method study of human–robot interaction over a 1-month period in the Living Lab setting

    Science.gov (United States)

    Wu, Ya-Huei; Wrobel, Jérémy; Cornuet, Mélanie; Kerhervé, Hélène; Damnée, Souad; Rigaud, Anne-Sophie

    2014-01-01

    Background There is growing interest in investigating acceptance of robots, which are increasingly being proposed as one form of assistive technology to support older adults, maintain their independence, and enhance their well-being. In the present study, we aimed to observe robot-acceptance in older adults, particularly subsequent to a 1-month direct experience with a robot. Subjects and methods Six older adults with mild cognitive impairment (MCI) and five cognitively intact healthy (CIH) older adults were recruited. Participants interacted with an assistive robot in the Living Lab once a week for 4 weeks. After being shown how to use the robot, participants performed tasks to simulate robot use in everyday life. Mixed methods, comprising a robot-acceptance questionnaire, semistructured interviews, usability-performance measures, and a focus group, were used. Results Both CIH and MCI subjects were able to learn how to use the robot. However, MCI subjects needed more time to perform tasks after a 1-week period of not using the robot. Both groups rated similarly on the robot-acceptance questionnaire. They showed low intention to use the robot, as well as negative attitudes toward and negative images of this device. They did not perceive it as useful in their daily life. However, they found it easy to use, amusing, and not threatening. In addition, social influence was perceived as powerful on robot adoption. Direct experience with the robot did not change the way the participants rated robots in their acceptance questionnaire. We identified several barriers to robot-acceptance, including older adults’ uneasiness with technology, feeling of stigmatization, and ethical/societal issues associated with robot use. Conclusion It is important to destigmatize images of assistive robots to facilitate their acceptance. Universal design aiming to increase the market for and production of products that are usable by everyone (to the greatest extent possible) might help to

  9. Maximum Likelihood Method for Predicting Environmental Conditions from Assemblage Composition: The R Package bio.infer

    Directory of Open Access Journals (Sweden)

    Lester L. Yuan

    2007-06-01

    Full Text Available This paper provides a brief introduction to the R package bio.infer, a set of scripts that facilitates the use of maximum likelihood (ML methods for predicting environmental conditions from assemblage composition. Environmental conditions can often be inferred from only biological data, and these inferences are useful when other sources of data are unavailable. ML prediction methods are statistically rigorous and applicable to a broader set of problems than more commonly used weighted averaging techniques. However, ML methods require a substantially greater investment of time to program algorithms and to perform computations. This package is designed to reduce the effort required to apply ML prediction methods.

  10. In acceptance we trust? Conceptualising acceptance as a viable approach to NGO security management.

    Science.gov (United States)

    Fast, Larissa A; Freeman, C Faith; O'Neill, Michael; Rowley, Elizabeth

    2013-04-01

    This paper documents current understanding of acceptance as a security management approach and explores issues and challenges non-governmental organisations (NGOs) confront when implementing an acceptance approach to security management. It argues that the failure of organisations to systematise and clearly articulate acceptance as a distinct security management approach and a lack of organisational policies and procedures concerning acceptance hinder its efficacy as a security management approach. The paper identifies key and cross-cutting components of acceptance that are critical to its effective implementation in order to advance a comprehensive and systematic concept of acceptance. The key components of acceptance illustrate how organisational and staff functions affect positively or negatively an organisation's acceptance, and include: an organisation's principles and mission, communications, negotiation, programming, relationships and networks, stakeholder and context analysis, staffing, and image. The paper contends that acceptance is linked not only to good programming, but also to overall organisational management and structures. © 2013 The Author(s). Journal compilation © Overseas Development Institute, 2013.

  11. Flexibility-Based Evaluation of Variable Generation Acceptability in Korean Power System

    Directory of Open Access Journals (Sweden)

    Chang-Gi Min

    2017-06-01

    Full Text Available This study proposes an evaluation method for variable generation (VG acceptability with an adequate level of power system flexibility. In this method, a risk index referred to as the ramping capability shortage expectation (RSE is used to quantify flexibility. The RSE value of the current power system is selected as the adequate level of flexibility (i.e., RSE criterion. VG acceptability is represented by the VG penetration level for the RSE criterion. The proposed evaluation method was applied to the generation expansion plan in Korea for 2029 in order to examine the validity of the existing plan for VG penetration. Sensitivity analysis was also performed to analyze the effects of changes in system uncertainty on VG acceptability. The results show that the planned VG penetration level for 2029 can improve by approximately 12% while securing flexibility.

  12. Acceptability of School-Based Health Centers for Human Papillomavirus Vaccination Visits: A Mixed-Methods Study.

    Science.gov (United States)

    Hansen, Caitlin E; Okoloko, Edirin; Ogunbajo, Adedotun; North, Anna; Niccolai, Linda M

    2017-09-01

    Countries with high human papillomavirus (HPV) vaccination rates have achieved this success largely through school-based vaccination. Using school-based health centers (SBHCs) in the United States, where HPV vaccine remains underutilized, could improve uptake. In this mixed-methods study, we examined acceptability, facilitators, and barriers of HPV vaccination visits at SBHCs from the perspectives of adolescents and parents. We conducted qualitative interviews and structured surveys with adolescents and parents recruited from an urban, hospital-based clinic. Interviews with parents (N = 20) and adolescents (N = 20) were audio-recorded and transcribed for analysis using an iterative thematic approach. Quantitative measures for a survey administered to parents (N = 131) were derived from the qualitative findings. Survey results were analyzed by chi-square tests. Many participants expressed favorable opinions of HPV vaccination at SBHCs in qualitative interviews. Facilitators included convenience, ease of scheduling, and not missing work or school. However, barriers were noted including concerns about obtaining care outside the medical home, fragmentation of medical records, and negative perceptions about SBHCs. Quantitative findings revealed that a higher proportion of parents with experience using SBHCs were willing to use a middle school (59.5%) or high school (80.5%) SBHC for HPV vaccinations compared with those who had not used SBHCs (p HPV vaccination visits at SBHCs were acceptable, and SBHC users expressed more favorable attitudes. Barriers to HPV vaccination at SBHCs can be addressed through more education about SBHCs' role, and improvement of systems to coordinate care. © 2017, American School Health Association.

  13. Workshop on environmental assessment

    International Nuclear Information System (INIS)

    Watson, E.C.

    1982-07-01

    Objectives of the workshop were: to review and evaluate the state-of-the-art of environmental impact assessments as applied to the regulation of applications of nuclear energy and related ancillary systems; to identify areas where existing technology allows establishing acceptable methods or standard practices that will meet the requirements of the NRC regulations, standards and guides for both normal operations and off-standard conditions including accident considerations; to illuminate topics where existing models or analytical methods are deficient because of unverified assumptions, a paucity of empirical data, conflicting results reported in the literature or a need for observation of operation systems; to compile, analyze and synthesize a prioritized set of research needs to advance the state-of-the-art to the level which will meet all of the requirements of the Commission's regulations, standards and guides; and to develop bases for maintaining the core of regulatory guidance at the optimum level balancing technical capabilities with practical considerations of cost and value to the regulatory process. The discussion held in small group sessions on aquatic, atmospheric, and terrestrial pathways are presented. The following research needs were identified as common to all three groups: validation of models; characterization of source terms; development of screening techniques; basis for de minimis levels of contamination; and updating of objectives for environmental monitoring programs

  14. The Study on Environmental Fatigue Behavior of Low Alloy Steel and Stainless Steel Pipes Using the Simplified Plant Transients

    International Nuclear Information System (INIS)

    Yoo, One; Song, M. S.; Kim, I. Y.; Park, S. H.; Lee, B. S.

    2010-01-01

    Nuclear components categorized as ASME Code Class 1 shall be evaluated for the fatigue and satisfy the fatigue acceptance criteria, CUF(cumulative usage factor) < 1 in accordance with ASME Code. However, recent studies have shown the fatigue evaluation procedure may not give conservative results when the components operate in the water environment. NRC issued Regulatory Guide 1.207 which enforces the new fatigue evaluation method or Fen(environmental fatigue correction factor) method to nuclear plants to be newly constructed. This paper describes the characteristics of the behavior of low alloy and austenitic stainless steel straight pipe related to environmental fatigue, which are obtained by using the method suggested by Regulatory Guide 1.207 and simplified plant transients

  15. Acceptance of an assistive robot in older adults: a mixed-method study of human–robot interaction over a 1-month period in the Living Lab setting

    Directory of Open Access Journals (Sweden)

    Wu YH

    2014-05-01

    Full Text Available Ya-Huei Wu,1,2 Jérémy Wrobel,1,2 Mélanie Cornuet,1,2 Hélène Kerhervé,1,2 Souad Damnée,1,2 Anne-Sophie Rigaud1,21Hôpital Broca, Assistance Publique – Hôpitaux de Paris, 2Research Team 4468, Faculté de Médecine, Université Paris Descartes, Paris, FranceBackground: There is growing interest in investigating acceptance of robots, which are increasingly being proposed as one form of assistive technology to support older adults, maintain their independence, and enhance their well-being. In the present study, we aimed to observe robot-acceptance in older adults, particularly subsequent to a 1-month direct experience with a robot.Subjects and methods: Six older adults with mild cognitive impairment (MCI and five cognitively intact healthy (CIH older adults were recruited. Participants interacted with an assistive robot in the Living Lab once a week for 4 weeks. After being shown how to use the robot, participants performed tasks to simulate robot use in everyday life. Mixed methods, comprising a robot-acceptance questionnaire, semistructured interviews, usability-performance measures, and a focus group, were used.Results: Both CIH and MCI subjects were able to learn how to use the robot. However, MCI subjects needed more time to perform tasks after a 1-week period of not using the robot. Both groups rated similarly on the robot-acceptance questionnaire. They showed low intention to use the robot, as well as negative attitudes toward and negative images of this device. They did not perceive it as useful in their daily life. However, they found it easy to use, amusing, and not threatening. In addition, social influence was perceived as powerful on robot adoption. Direct experience with the robot did not change the way the participants rated robots in their acceptance questionnaire. We identified several barriers to robot-acceptance, including older adults’ uneasiness with technology, feeling of stigmatization, and ethical

  16. A method to forecast quantitative variables relating to nuclear public acceptance

    International Nuclear Information System (INIS)

    Ohnishi, T.

    1992-01-01

    A methodology is proposed for forecasting the future trend of quantitative variables profoundly related to the public acceptance (PA) of nuclear energy. The social environment influencing PA is first modeled by breaking it down into a finite number of fundamental elements and then the interactive formulae between the quantitative variables, which are attributed to and characterize each element, are determined by using the actual values of the variables in the past. Inputting the estimated values of exogenous variables into these formulae, the forecast values of endogenous variables can finally be obtained. Using this method, the problem of nuclear PA in Japan is treated as, for example, where the context is considered to comprise a public sector and the general social environment and socio-psychology. The public sector is broken down into three elements of the general public, the inhabitants living around nuclear facilities and the activists of anti-nuclear movements, whereas the social environment and socio-psychological factors are broken down into several elements, such as news media and psychological factors. Twenty-seven endogenous and seven exogenous variables are introduced to quantify these elements. After quantitatively formulating the interactive features between them and extrapolating the exogenous variables into the future estimates are made of the growth or attenuation of the endogenous variables, such as the pro- and anti-nuclear fractions in public opinion polls and the frequency of occurrence of anti-nuclear movements. (author)

  17. Olympic Dam project: assessment of the environmental impact

    International Nuclear Information System (INIS)

    1983-11-01

    The assessment report on the Environmental Impact Statement produced for the Olympic Dam project is intended to provide the South Australian Government with a comprehensive evaluation of the potential impact of the proposal and to make recommendations concerning the project to be negotiated with the Joint Venturers prior to approval of the EIS. The project involves the mining, processing and sale of products from the copper-uranium ore body at Olympic Dam on the Roxby Downs Station, South Australia. The report includes a description of the proposal, a description of the environment likely to be affected, a discussion of the potential impacts on that environment, a discussion of the adequacy of information presented in the EIS and a discussion of the acceptability of the environmental impacts. The Department has concluded that the pre-design proposal is acceptable on environmental grounds

  18. Environmental management of business processes

    Directory of Open Access Journals (Sweden)

    Vesna Čančer

    2000-01-01

    Full Text Available Since the decision-makers in enterprises will accept the goals of environmental management only if they are motivated enough, comprehensible and useful tools should be generated to support environmentally oriented business decision-making. For that reason, a general optimisation model of the multiphase business process is presented in this paper. This model includes the possibilities for an integrated approach to environmental protection so that it can be applied as a scenario by the business process simulation for the evaluation of environmentally oriented business decisions on business performance. Furthermore, development and application possibilities of the presented model are introduced. Some measures of resource efficiency are developed using the presented optimisation model.

  19. Human annoyance, acceptability and concern as responses to vibration from the construction of Light Rapid Transit lines in residential environments

    Energy Technology Data Exchange (ETDEWEB)

    Wong-McSweeney, D., E-mail: D.B.C.WongMcSweeney@salford.ac.uk [Acoustics Research Centre, University of Salford, Salford M5 4TW (United Kingdom); Woodcock, J.S.; Peris, E.; Waddington, D.C.; Moorhouse, A.T. [Acoustics Research Centre, University of Salford, Salford M5 4TW (United Kingdom); Redel-Macías, M.D. [Dep. Rural Engineering Campus de Rabanales, University of Córdoba, Córdoba (Spain)

    2016-10-15

    The aim of this paper is to investigate the use of different self-reported measures for assessing the human response to environmental vibration from the construction of an urban LRT (Light Rapid Transit) system. The human response to environmental stressors such as vibration and noise is often expressed in terms of exposure–response relationships that describe annoyance as a function of the magnitude of the vibration. These relationships are often the basis of noise and vibration policy and the setting of limit values. This paper examines measures other than annoyance by expressing exposure–response relationships for vibration in terms of self-reported concern about property damage and acceptability. The exposure–response relationships for concern about property damage and for acceptability are then compared with those for annoyance. It is shown that concern about property damage occurs at vibration levels well below those where there is any risk of damage. Earlier research indicated that concern for damage is an important moderator of the annoyance induced. Acceptability, on the other hand, might be influenced by both annoyance and concern, as well as by other considerations. It is concluded that exposure–response relationships expressing acceptability as a function of vibration exposure could usefully complement existing relationships for annoyance in future policy decisions regarding environmental vibration. The results presented in this paper are derived from data collected through a socio-vibration survey (N = 321) conducted for the construction of an urban LRT in the United Kingdom. - Highlights: • The human response to construction vibration is assessed in residential environments. • Exposure–response relationships are generated based on survey and semi-empirical vibration estimation. • Annoyance, concern and acceptability are compared as response measures. • Concern and acceptability are viable measures complementing annoyance.

  20. Environmental Health Problems and Indicators in Tabriz, Iran

    Directory of Open Access Journals (Sweden)

    Mohammad Ghanbari Ghozikali

    2013-06-01

    Full Text Available Background: Environmental Health Indicators (EHIs are the most im¬portant criteria for evaluation of effi¬ciency and effectiveness of the activi¬ties of the health sector. The operations and situation of the health sys¬tem can be analyzed through surveying the indicators and comparing them during different times. The present study aimed to study the EHIs of Ta¬briz, using the common environmental health processes and national EHIs of the Ministry of Health. Method: The required information for determination of EHIs was col¬lected from different sources, including mainly the Environmental Health De¬partment of the Health Center of East Azerbaijan Province, Iran and other organizations. Results: We found some important desirable and undesirable EHIs in Ta¬briz, including high percentage of households with access to safe and reliable drinking water, high safety in microbiological and chemical quality of drink¬ing water, acceptable level of BOD5 and COD in the effluent of wastewater treatment plants (WTP, lack of complete municipal wastewa¬ter collection and treatment, relatively poor sanitation and health of food markets and public places, undesirable collection, transportation and dis¬posal of munici¬pal solid waste, low EHIs of some school classrooms, un¬acceptable disposal of medical waste in some hospitals, and finally high level of noise pollution in the city.Conclusion: Considering the poor condition of some EHIs of Tabriz, im-plementing proper actions for pro¬motion of the indicators especially devel¬opment of municipal wastewater collection, improvement of solid waste management, environmental health of some schools and mosques, and fi¬nally the noise pollution level of the city is recommended.

  1. How is Acceptable Public Risk Determined?

    International Nuclear Information System (INIS)

    Treichel, Judy

    2001-01-01

    Acceptance of risk is a value-based decision, that is, the acceptance of risk by a person or group of persons depends on the values of the person or the shared values of the group. In the case of nuclear waste management, the nuclear industry, the regulators, and the general public approach risk from entirely different perspectives, dictated by the separate value systems held by each. The utilities producing radioactive waste view risk assessment as a part of a business decision that involves costs and benefits. The values that drive public acceptance of a national nuclear waste management policy are very different. As stated by Peter Montague of the Environmental Research Foundation: 'The only people I know who are enthusiastic about quantitative risk assessment are people who want to gain permission to expose other humans to dangerous chemicals so someone can make money. Risk assessment has proven to be an effective way to gain the necessary permissions'. Between the industry and the public are the regulators. Most national governments require regulatory agencies to establish rules that provide adequate public safety while allowing industries, whether nuclear or other producers of public commodities, to profitably do business. The general population has always had a fragile relationship with nuclear proponents. There is an atmosphere of mistrust based on the understanding that the values that matter to the general public differ tremendously from those purported by the industry and regulators. The general public is more interested in worst case scenarios; that is, what is the most severe negative consequence to their safety and the safety of their children that could result from nuclear projects. There is no cost or benefit more important to the general public than the health and safety of their families. The rift in values creates a great disparity in proposed solutions to the nuclear waste question. Regulators regard public acceptance of a risk-informed policy

  2. How is Acceptable Public Risk Determined?

    Energy Technology Data Exchange (ETDEWEB)

    Treichel, Judy [Nevada Nuclear Waste Task Force, Las Vegas, NV (United States)

    2001-07-01

    Acceptance of risk is a value-based decision, that is, the acceptance of risk by a person or group of persons depends on the values of the person or the shared values of the group. In the case of nuclear waste management, the nuclear industry, the regulators, and the general public approach risk from entirely different perspectives, dictated by the separate value systems held by each. The utilities producing radioactive waste view risk assessment as a part of a business decision that involves costs and benefits. The values that drive public acceptance of a national nuclear waste management policy are very different. As stated by Peter Montague of the Environmental Research Foundation: 'The only people I know who are enthusiastic about quantitative risk assessment are people who want to gain permission to expose other humans to dangerous chemicals so someone can make money. Risk assessment has proven to be an effective way to gain the necessary permissions'. Between the industry and the public are the regulators. Most national governments require regulatory agencies to establish rules that provide adequate public safety while allowing industries, whether nuclear or other producers of public commodities, to profitably do business. The general population has always had a fragile relationship with nuclear proponents. There is an atmosphere of mistrust based on the understanding that the values that matter to the general public differ tremendously from those purported by the industry and regulators. The general public is more interested in worst case scenarios; that is, what is the most severe negative consequence to their safety and the safety of their children that could result from nuclear projects. There is no cost or benefit more important to the general public than the health and safety of their families. The rift in values creates a great disparity in proposed solutions to the nuclear waste question. Regulators regard public acceptance of a risk

  3. Food irradiation receives international acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Beddoes, J M [Atomic Energy of Canada Ltd., Ottawa, Ontario. Commercial Products

    1982-04-01

    Irradiation has advantages as a method of preserving food, especially in the Third World. The author tabulates some examples of actual use of food irradiation with dates and tonnages, and tells the story of the gradual acceptance of food irradiation by the World Health Organization, other international bodies, and the U.S. Food and Drug Administration (USFDA). At present, the joint IAEA/FAO/WHO standard permits an energy level of up to 5 MeV for gamma rays, well above the 1.3 MeV energy level of /sup 60/Co. The USFDA permits irradiation of any food up to 10 krad, and minor constituents of a diet may be irradiated up to 5 Mrad. The final hurdle to be cleared, that of economic acceptance, depends on convincing the food processing industry that the process is technically and economically efficient.

  4. Food irradiation receives international acceptance

    International Nuclear Information System (INIS)

    Beddoes, J.M.

    1982-01-01

    Irradition has advantages as a method of preserving food, especially in the Third World. The author tabulates some examples of actual use of food irradiation with dates and tonnages, and tells the story of the gradual acceptance of food irradiation by the World Health Organization, other international bodies, and the U.S. Food and Drug Administration (USFDA). At present, the joint IAEA/FAO/WHO standard permits an energy level of up to 5 MeV for gamma rays, well above the 1.3 MeV energy level of 60 Co. The USFDA permits irradiation of any food up to 10 krad, and minor constituents of a diet may be irradiated up to 5 Mrad. The final hurdle to be cleared, that of economic acceptance, depends on convincing the food processing industry that the process is technically and economically efficient

  5. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - PORTABLE GAS CHROMATOGRAPH ELECTRONIC SENSOR TECHNOLOGY MODEL 4100

    Science.gov (United States)

    The U.S. Environmental Protection Agency, through the Environmental Technology Verification Program, is working to accelerate the acceptance and use of innovative technologies that improve the way the United States manages its environmental problems. As part of this program, the...

  6. Effect of the Fukushima nuclear disaster on global public acceptance of nuclear energy

    International Nuclear Information System (INIS)

    Kim, Younghwan; Kim, Minki; Kim, Wonjoon

    2013-01-01

    The Fukushima nuclear disaster has significantly changed public attitudes toward nuclear energy. It is important to understand how this change has occurred in different countries before the global community revises existing nuclear policies. This study examines the effect of the Fukushima disaster on public acceptance of nuclear energy in 42 countries. We find that the operational experience of nuclear power generation which has significantly affected positive public opinion about nuclear energy became considerably negative after the disaster, suggesting fundamental changes in public acceptance regardless of the level of acceptance before the disaster. In addition, contrary to our expectation, the proportion of nuclear power generation is positively and significantly related to public acceptance of nuclear energy after the Fukushima accident and government pressure on media content led to a greater decrease in the level of public acceptance after the accident. Nuclear energy policymakers should consider the varied factors affecting public acceptance of nuclear energy in each country depending on its historical, environmental, and geographical circumstances before they revise nuclear policy in response to the Fukushima accident. - Highlights: • Fukushima accident has negatively changed public attitudes toward nuclear energy. • Effect of operational experience became considerably negative after the accident. • Effect of proportion of nuclear power generation is positive after the accident. • Effect of government pressure on media content became negative after the accident. • Country specific policy responses on nuclear public acceptance are required

  7. Analysis the Human and Environmental Consequences of Power Pplants Using Combined Delphi and AHP Method

    International Nuclear Information System (INIS)

    Jozi, S. A.; Saffarian, Sh.; Shafiee, M.; Akbari, A.

    2016-01-01

    Power plants, due to the nature of their processes and activities and also by producing the effluents, emitting the air pollutants and hazardous wastes, have the potential to cause negative human and environmental consequences. Given the importance of the issue, for determining the most important consequences of Abadan Gas Power Plant and also their impact on the human and natural environment, as a case study, a questionnaire was developed with Delphi method. This questionnaire was distributed within the environmentalists and experts of power plant. The human and environmental consequences of Power Plant were analyzed by Multiple Criteria Decision-Making methods including AHP and eigenvector technique. For this purpose, with applying of AHP method, the hierarchical structure of the human and environmental consequences of Abadan Gas Power Plant was constructed and then the decision making matrix was formed. The pair wise matrices were formed separately for criteria pair wise comparisons with respect to severity and occurrence probability of indoor and outdoor environment of power plant .With entering the data in EXPERT CHOICE software, criteria weights were computed with applying the eigenvector method. Then the final weights of consequences in terms of severity and occurrence probability of risk were computed. The results from the compution of Abadan Gas Power Plant consequences indicate that in human consequences, shallow wounds with a .105 weight and in environmental consequences, air pollution by weighing 0.66 are the most important consequences of power plant. Finally, the most important executable strategies and actions for mitigation of negative human and environmental consequences were presented.

  8. Progress in the methods for analyses and measurements of environmental radionuclides

    International Nuclear Information System (INIS)

    1984-01-01

    The tenth seminar on environment of the National Institute of Radiological Sciences was held in Chiba on December 9 and 10, 1982, under the joint auspices with Japan Health Physics Society. The recent progress of the measuring techniques for environmental radiation substances is remarkable. The Japanese data on environmental radiation presented to the UN Scientific Committee on the Effect of Atomic Radiation have obtained very high esteem because the data have been reliable due to the progress of measuring techniques. However, this field is in steady progress and changes rapidly, therefore, this seminar was planned. In this report, the history of the analysis and measurement of environmental radioactivity, the method of sampling and pretreatment operation for such environmental specimens as gaseous radionuclides, atmospheric floating dust, soil, agricultural products, sea water and sea bottom sediment, marine life, foods and living bodies, the progress of chemical separation process, the automation of analysis and measurement, the progress of the analysis of low level nuclides with long half-value period, the manual for the analysis and measurement, the quality of the analysis and measurement and its assurance are described. (Kako, I.)

  9. Quality of life and satisfaction with life of malaria patients in context of acceptance of the disease: quantitative studies.

    Science.gov (United States)

    Van Damme-Ostapowicz, Katarzyna; Krajewska-Kułak, Elżbieta; Rozwadowska, Emilia; Nahorski, Wacław L; Olszański, Romuald

    2012-06-29

    Health status is one of the basic factors of a high quality of life and the problem of the acceptance of illness is important for adaptation to the limitations imposed by it. The purpose of the study was the evaluation of the quality of life, satisfaction with life and the acceptance of illness by malaria patients, as well as the discovery of a relationship between studied parameters. The study was undertaken in August 2010, on 120 Nigerian patients with confirmed malaria. A method of diagnostic survey, based on standardized scales - Acceptance of Illness Scale, The Satisfaction With Life Scale and a standardized survey questionnaire World Health Organization Quality of Life/BREF - was used in this study. Descriptive statistics, variability range, 95% confidence interval, correlation analysis, Spearman's non-parametric correlation coefficient, Mann-Whitney test and Kruskal-Wallis test were applied and the, so called, test statistics was calculated, followed by the calculation of the test probability p. Results of analyses were presented in a box graph, and a graph of dispersion. A dominating share in the adjective scale of the AIS scale was the category of "no acceptance", given by 71.7% of respondents. The average level of a "somatic domain" was 41.7, and of a "social domain" was 62.8. The mean satisfaction of life evaluation in the SWLS scale was 18 points. The correlation between acceptance of the disease and quality of life for the psychological domain was 0.39***, and between acceptance of the disease and satisfaction with life was 0.40***. The correlation between satisfaction with life and quality of life for the psychological domain was 0.65***, and between satisfaction with life and quality of life for the environment domain was 0.60***. The mean level of AIS for the studied population of men was 16.5, and test probability: p = 0.0014**, and for the environment domain the level was 50, and the test probability: p = 0.0073**. For quality of life in

  10. Influence of Source Credibility on Consumer Acceptance of Genetically Modified Foods in China

    Directory of Open Access Journals (Sweden)

    Mingyang Zhang

    2016-09-01

    Full Text Available This paper examines the reasoning mechanism behind the consumer acceptance of genetically modified foods (GMFs in China, and investigates influence of source credibility on consumer acceptance of GMFs. Based on the original Persuasion Model—which was developed by Carl Hovland, an American psychologist and pioneer in the study of communication and its effect on attitudes and beliefs—we conducted a survey using multistage sampling from 1167 urban residents, which were proportionally selected from six cities in three economic regions (south, central, and north in the Jiangsu province through face to face interviews. Mixed-process regression that could correct endogeneity and ordered probit model were used to test the impact of source credibility on consumers’ acceptance of GMFs. Our major finding was that consumer acceptance of GMFs is affected by such factors as information source credibility, general attitudes, gender, and education levels. The reliability of biotechnology research institutes, government offices devoted to management of GM organisms (GMOs, and GMO technological experts have expedited urban consumer acceptance of GM soybean oil. However, public acceptance can also decrease as faith in the environmental organization. We also found that ignorance of the endogeneity of above mentioned source significantly undervalued its effect on consumers’ acceptance. Moreover, the remaining three sources (non-GMO experts, food companies, and anonymous information found on the Internet had almost no effect on consumer acceptance. Surprisingly, the more educated people in our survey were more skeptical towards GMFs. Our results contribute to the behavioral literature on consumer attitudes toward GMFs by developing a reasoning mechanism determining consumer acceptance of GMFs. Particularly, this paper quantitatively studied the influence of different source credibility on consumer acceptance of GMFs by using mixed-process regression to

  11. TextTB: A Mixed Method Pilot Study Evaluating Acceptance, Feasibility, and Exploring Initial Efficacy of a Text Messaging Intervention to Support TB Treatment Adherence

    Directory of Open Access Journals (Sweden)

    Sarah Iribarren

    2013-01-01

    Full Text Available Objective. To assess a text messaging intervention to promote tuberculosis (TB treatment adherence. Methods. A mixed-methods pilot study was conducted within a public pulmonary-specialized hospital in Argentina. Patients newly diagnosed with TB who were 18 or older, and had mobile phone access were recruited and randomized to usual care plus either medication calendar (n=19 or text messaging intervention (n=18 for the first two months of treatment. Primary outcomes were feasibility and acceptability; secondary outcomes explored initial efficacy. Results. Feasibility was evidenced by high access to mobile phones, familiarity with texting, most phones limited to basic features, a low rate of participant refusal, and many describing suboptimal TB understanding. Acceptability was evidenced by participants indicating feeling cared for, supported, responsible for their treatment, and many self-reporting adherence without a reminder. Participants in the texting group self-reported adherence on average 77% of the days whereas only 53% in calendar group returned diaries. Exploring initial efficacy, microscopy testing was low and treatment outcomes were similar in both groups. Conclusion. The texting intervention was well accepted and feasible with greater reporting of adherence using text messaging than the diary. Further evaluation of the texting intervention is warranted.

  12. Acceptability of vaginal microbicides among female sex workers and their intimate male partners in two Mexico-U.S. border cities: a mixed methods analysis

    Science.gov (United States)

    Robertson, Angela M.; Syvertsen, Jennifer L.; Martinez, Gustavo; Rangel, M. Gudelia; Palinkas, Lawrence A.; Stockman, Jamila K.; Ulibarri, Monica D.; Strathdee, Steffanie A.

    2013-01-01

    Background Female sex workers (FSWs) may benefit from pre-exposure prophylaxis (PrEP) including microbicides for HIV prevention. Since adherence is a key factor in PrEP efficacy, we explored microbicide acceptability and potential barriers to use within FSWs’ intimate relationships in Tijuana and Ciudad Juárez, Mexico, where HIV prevalence is increasing. Methods FSWs and their verified intimate (non-commercial) male partners completed quantitative and qualitative interviews from 2010–2012. Our complementary mixed methods design followed an iterative process to assess microbicide acceptability, explore related relationship dynamics, and identify factors associated with concern about male partners’ anger regarding microbicide use. Results Among 185 couples (n=370 individuals), interest in microbicides was high. In qualitative interviews with 28 couples, most participants were enthusiastic about microbicides for sex work contexts but some explained that microbicides could imply mistrust/infidelity within their intimate relationships. In the overall sample, nearly 1 in 6 participants (16%) worried that male partners would become angry about microbicides, which was associated with higher self-esteem among FSWs and lower self-esteem and past year conflict causing injury within relationships among men. Conclusions HIV prevention interventions should consider intimate relationship dynamics posing potential barriers to PrEP acceptability and adherence, involve male partners, and promote risk communication skills. PMID:23398385

  13. Sensory characteristics and consumer acceptability of fermented soybean paste (Doenjang).

    Science.gov (United States)

    Kim, H G; Hong, J H; Song, C K; Shin, H W; Kim, K O

    2010-09-01

    This study was conducted to examine the sensory profiles of fermented soybean paste (Doenjang), to understand consumers' acceptability of different types of Doenjang samples and to identify the sensory characteristics that drive consumer acceptability of Doenjang products. Descriptive analysis and consumer acceptability test were conducted for 7 different types of Doenjang samples. The samples included 2 types of Doenjang made by either traditional or commercially modified methods. For the descriptive analysis, 8 trained panelists developed and evaluated 31 descriptors. There were significant differences in all 31 attributes among the samples. Principal component analysis was also performed to summarize the sensory characteristics of the samples. In consumer testing, 200 consumers evaluated the acceptability of Doenjang samples. Significant differences in consumer acceptability were observed among the samples. The consumers preferred the Doenjang samples manufactured using a commercially modified method. In overall point of view, most consumers liked the Doenjang samples that had strong "sweet" and "MSG (monosodium glutamate)" tastes. It appears that "sweet" and "MSG" tastes are the drivers of liking for Doenjang. "Salty" taste, "meju,"traditional Korean soy sauce," and "fermented fish" odor/flavors seem to be the drivers of disliking for Doenjang. Cluster analysis identified 3 subconsumer segments sharing a common preference pattern for the 7 samples within a cluster. The results showed that each consumer cluster preferred different Doenjang samples. External preference mapping was performed to establish the relationships between the sensory attributes and consumer acceptability in each cluster. Consumption of the fermented soybean products is gradually expanding around the world, due to their various health benefits. Therefore, understanding sensory characteristics and consumer acceptability of Doenjang are becoming increasingly important. The intense and complex

  14. Investigating Environmentally Sustainable Transport Based on DALY weights and SIR Method

    Directory of Open Access Journals (Sweden)

    Hossein Nezamianpour Jahromi

    2012-09-01

    Full Text Available Accessibility is one of the main causes of well-being and growth in contemporary societies. Transportation is the backbone of accessibility systems that lead to the growth of economic and social networks and spatial dispersion of activities. Unfortunately, the adverse effects of transportation have a great impact on the natural and human environment. Since transportation is associated with fossil fuel combustion, it results in emissions of pollutants that cause damage to human health. To save the global eco-system, sustainable development has become an international priority. To deal with the sustainability of transportation systems is an important issue as testified by a growing number of initiatives framed to define and measure sustainability in transportation planning and infrastructure planning as well. The capability of environmental assessment as a sustainability instrument is well known. This study proposes a new approach to rank countries based on environmental sustainability development applying disability adjusted life year (DALY weights for transportation sector emissions. DALY weights consider actual impacts of pollutants on human health. By employing SIR method, a superiority and inferiority ranking method is presented for multiple criteria decision making, the sustainability ranking of a number of European countries is presented. Three various ranking methods extracted from SIR ranking method are discussed and the results and the correlation among them are demonstrated.

  15. Public acceptance of renewable energies. Results from case studies in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Zoellner, Jan; Schweizer-Ries, Petra; Wemheuer, Christin [Department of Psychology, Otto-von-Guericke-University Magdeburg, Universitaetsplatz 2, 39106 Magdeburg (Germany)

    2008-11-15

    This article addresses the public acceptance of certain renewable energies (grid-connected larger PV ground-installed systems, biomass plants and wind turbines) from a socio-scientific perspective. Using an environmental-psychological approach to investigate the social factors relevant to the formation of public acceptance towards renewable energies in four different regions, recommendations for the further implementation of renewable energy systems were to be derived. The present study has been conducted in a multi-modal research design combining a standardised questionnaire and qualitative interviews and focused on the residents' views and perceptions. Especially within the quantitative analyses, the results indicate that economic consideration of the respective renewable energy system, understood as a positive cost-benefit calculation made by the individual, is the strongest predictor for a reported acceptance. Furthermore, the importance of landscape evaluation and a strong connection between procedural justice criteria, such as transparency, early and accurate information as well as possibilities to participate during the planning and installation process, and a reported public acceptance became evident. Qualitative data were analysed in reference to the grounded theory and showed the relevance of the operating company's commitment on the local level, participation of the general public and the choice of the location for the plant were among the relevant aspects for acceptance in the implementation process. This survey is part of a 3-year project funded by the Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (BMU). (author)

  16. Public acceptance of renewable energies: Results from case studies in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Zoellner, Jan [Department of Psychology, Otto-von-Guericke-University Magdeburg, Universitaetsplatz 2, 39106 Magdeburg (Germany)], E-mail: jan.zoellner@ovgu.de; Schweizer-Ries, Petra; Wemheuer, Christin [Department of Psychology, Otto-von-Guericke-University Magdeburg, Universitaetsplatz 2, 39106 Magdeburg (Germany)

    2008-11-15

    This article addresses the public acceptance of certain renewable energies (grid-connected larger PV ground-installed systems, biomass plants and wind turbines) from a socio-scientific perspective. Using an environmental-psychological approach to investigate the social factors relevant to the formation of public acceptance towards renewable energies in four different regions, recommendations for the further implementation of renewable energy systems were to be derived. The present study has been conducted in a multi-modal research design combining a standardised questionnaire and qualitative interviews and focused on the residents' views and perceptions. Especially within the quantitative analyses, the results indicate that economic consideration of the respective renewable energy system, understood as a positive cost-benefit calculation made by the individual, is the strongest predictor for a reported acceptance. Furthermore, the importance of landscape evaluation and a strong connection between procedural justice criteria, such as transparency, early and accurate information as well as possibilities to participate during the planning and installation process, and a reported public acceptance became evident. Qualitative data were analysed in reference to the grounded theory and showed the relevance of the operating company's commitment on the local level, participation of the general public and the choice of the location for the plant were among the relevant aspects for acceptance in the implementation process. This survey is part of a 3-year project funded by the Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (BMU)

  17. Acceptance of Nordic snack bars in children aged 8-11 years.

    Science.gov (United States)

    Holmer, Anna; Hausner, Helene; Reinbach, Helene C; Bredie, Wender L P; Wendin, Karin

    2012-01-01

    A health promoting diet is suggested to be tailored to regional circumstances to preserve the cultural diversity in eating habits, as well as contribute to more environmentally friendly eating. It may influence consumer acceptance, however, if the components of the diet differs considerably from their habitual food. This study aimed to investigate whether snack bars composed of Nordic ingredients were accepted by 8-11 year-old Danish (n=134) and Swedish (n=109) children. A seven-point hedonic scale was used to measure the children's acceptance of five snack bars that varied in their composition of whole grains, berries and nuts. A preference rank ordering of the five bars was also performed. The results showed that samples that were rated highest in liking and were most preferred in both countries were a kamut/pumpkin bar and an oat/cranberry bar. The sample with the lowest rating that was also least preferred was a pumpernickel/sea buckthorn bar. Flavour was the most important determinant of overall liking followed by texture, odour and appearance. Children's acceptances and preferences were highly influenced by the sensory characteristics of the bars, mainly flavour. In agreement with earlier studies, the novel food ingredients seemed to influence children's preferences. The Nordic snack bars may have a potential to be a snack option for Danish and Swedish school children, but repeated exposures to the products are recommended to increase children's acceptance.

  18. Public acceptance of renewable energies: Results from case studies in Germany

    International Nuclear Information System (INIS)

    Zoellner, Jan; Schweizer-Ries, Petra; Wemheuer, Christin

    2008-01-01

    This article addresses the public acceptance of certain renewable energies (grid-connected larger PV ground-installed systems, biomass plants and wind turbines) from a socio-scientific perspective. Using an environmental-psychological approach to investigate the social factors relevant to the formation of public acceptance towards renewable energies in four different regions, recommendations for the further implementation of renewable energy systems were to be derived. The present study has been conducted in a multi-modal research design combining a standardised questionnaire and qualitative interviews and focused on the residents' views and perceptions. Especially within the quantitative analyses, the results indicate that economic consideration of the respective renewable energy system, understood as a positive cost-benefit calculation made by the individual, is the strongest predictor for a reported acceptance. Furthermore, the importance of landscape evaluation and a strong connection between procedural justice criteria, such as transparency, early and accurate information as well as possibilities to participate during the planning and installation process, and a reported public acceptance became evident. Qualitative data were analysed in reference to the grounded theory and showed the relevance of the operating company's commitment on the local level, participation of the general public and the choice of the location for the plant were among the relevant aspects for acceptance in the implementation process. This survey is part of a 3-year project funded by the Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (BMU)

  19. Environmental taxation. An overview

    International Nuclear Information System (INIS)

    Marcus, Vincent; Duboucher, Peggy; Ben Maid, Atika; Devaux, Jeremy; Nicklaus, Doris; Calvet, Melanie; Poupard, Christophe; Pourquier, Francois-Xavier; Vicard, Augustin; Monnoyer-Smith, Laurence

    2017-01-01

    This official publication proposes a detailed overview of the situation of environmental taxation in France. It first gives a general overview by discussing some key figures, by recalling the chronology of the main environmental taxation arrangements, and by discussing lessons learned from French and foreign experiments for an efficient, acceptable and consistent taxation. The second part proposes a detailed presentation of environmental taxation by distinguishing its main themes and objectives: struggle against climate change, reduction of air pollution and water pollution, and wastes, preservations and development of resources from biodiversity (soil artificialization, sustainable management of fauna and flora), efficient use of non renewable resources and of water (water resources, energetic and mineral raw materials). For each of these themes, the report presents the environmental problematic, and the existing arrangements, and proposes some elements of international comparison. The last part proposes a list of all environmental taxes

  20. Individual-motivational factors in the acceptability of demand-side and supply-side measures to reduce carbon emissions

    International Nuclear Information System (INIS)

    Poortinga, Wouter; Spence, Alexa; Demski, Christina; Pidgeon, Nick F.

    2012-01-01

    As more than a third of all carbon dioxide emissions in the UK are generated by the domestic sector, individuals need to make drastic changes to their current lifestyle in order to play their part in climate change mitigation. Not only do they need to change their personal behaviour, they also have to accept new low-carbon technologies in order to decarbonise the energy they are using. This study uses an adapted version of the Value–Belief-Norm (VBN) model () to examine individual-motivational factors in the acceptability of demand-side and supply-side strategies to reduce carbon emissions. The study found that environmental identity, climate change concern, and personal norms are all significantly associated with the acceptability of both demand-side measures and supply-side technologies. While personal values were also important, their associations were mediated by more specific factors. Overall, the adapted VBN model was better able to explain the acceptability of low-carbon behaviours than of low-carbon energy-supply technologies. Concern about energy security appeared to be of limited importance. It was negatively associated with the willingness to engage in low-carbon behaviours, suggesting that a shift in focus towards energy security issues may not necessarily help a transition to a low-carbon society. - Highlights: ► An adapted VBN model is proposed to study environmentally significant behaviour.► Environmental identity is important for both demand-side and supply-side measures.► Energy security concern is of limited importance to support for supply-side measures.► Energy security concern reduces the willingness to engage in low-carbon behaviours.

  1. MEASUREMENT FOR ACCEPTANCE OF SUPPLY CHAIN SIMULATOR APPLICATION USING TECHNOLOGY ACCEPTANCE MODEL

    Directory of Open Access Journals (Sweden)

    Mulyati E.

    2018-03-01

    Full Text Available The aim of this research for was to measure the user acceptance of simulator application which was built as a tool for student in learning of supply chain, particularly in bullwhip effect problem. The measurements used for the acceptance of supply chain simulator application in this research was the Technology Acceptance Model from 162 samples which were analyzed with Confirmatory Factor Analysis and Structural Equation Modelling. The result of this research indicated that the user acceptance (shown by customer participation of supply chain simulator was directly influence by perceived usefulness of supply chain simulator application used (positive and significant; the user acceptance of supply chain simulator was indirectly influenced by perceived ease of use in using supply chain simulator application (positive but not significant; the user acceptance of supply chain simulator was indirectly influenced by perceived enjoyment when the supply chain simulator application was used. The research would give a better understanding about a bullwhip effect and better experience for students, which would not be obtained through conventional learning, when the tools were not used.

  2. Environmental Impacts and Embodied Energy of Construction Methods and Materials in Low-Income Tropical Housing

    Directory of Open Access Journals (Sweden)

    Arman Hashemi

    2015-06-01

    Full Text Available This paper evaluates the current conditions of Ugandan low-income tropical housing with a focus on construction methods and materials in order to identify the key areas for improvement. Literature review, site visits and photographic surveys are carried out to collect relevant information on prevailing construction methods/materials and on their environmental impacts in rural areas. Low quality, high waste, and energy intensive production methods, as well as excessive soil extraction and deforestation, are identified as the main environmental damage of the current construction methods and materials. The embodied energy is highlighted as the key area which should be addressed to reduce the CO2 emissions of low-income tropical housing. The results indicate that the embodied energy of fired bricks in Uganda is up to 5.7 times more than general clay bricks. Concrete walling is identified as a much more environmentally friendly construction method compared to brick walling in East African countries. Improving fuel efficiency and moulding systems, increasing access to renewable energy sources, raising public awareness, educating local manufacturers and artisans, and gradual long-term introduction of innovative construction methods and materials which are adapted to local needs and conditions are some of the recommended actions to improve the current conditions.

  3. Environmental drivers of human migration in drylands - A spatial picture

    NARCIS (Netherlands)

    Neumann, K.; Sietz, D.; Hilderink, H.; Janssen, P.; Kok, M.; Dijk, van H.

    2015-01-01

    It is widely accepted that environmental change can influence human migration. In particular, the environment plays a role in migration processes in drylands, in which environmental change—including increasing variability of rainfall, increasing frequency of droughts, chronic water shortage, and

  4. Summer Undergraduate Research Program: Environmental studies

    Energy Technology Data Exchange (ETDEWEB)

    McMillan, J. [ed.

    1994-12-31

    The purpose of the summer undergraduate internship program for research in environmental studies is to provide an opportunity for well-qualified students to undertake an original research project as an apprentice to an active research scientist in basic environmental research. The students are offered research topics at the Medical University in the scientific areas of pharmacology and toxicology, epidemiology and risk assessment, environmental microbiology, and marine sciences. Students are also afforded the opportunity to work with faculty at the University of Charleston, SC, on projects with an environmental theme. Ten well-qualified students from colleges and universities throughout the eastern United States were accepted into the program.

  5. Who Will Use Pre-Exposure Prophylaxis (PrEP) and Why?: Understanding PrEP Awareness and Acceptability amongst Men Who Have Sex with Men in the UK ? A Mixed Methods Study

    OpenAIRE

    Frankis, Jamie; Young, Ingrid; Flowers, Paul; McDaid, Lisa

    2016-01-01

    Background:\\ud Recent clinical trials suggest that pre-exposure prophylaxis (PrEP) may reduce HIV transmission by up to 86% for men who have sex with men (MSM), whilst relatively high levels of PrEP acceptability have been reported to date. This study examines PrEP awareness amongst sub-groups of MSM communities and acceptability amongst MSM in a low prevalence region (Scotland, UK), using a mixed methods design.\\ud Methods:\\ud Quantitative surveys of n = 690 MSM recruited online via social a...

  6. Response Surface Method and Linear Programming in the development of mixed nectar of acceptability high and minimum cost

    Directory of Open Access Journals (Sweden)

    Enrique López Calderón

    2012-06-01

    Full Text Available The aim of this study was to develop a high acceptability mixed nectar and low cost. To obtain the nectar mixed considered different amounts of passion fruit, sweet pepino, sucrose, and completing 100% with water, following a two-stage design: screening (using a design of type 2 3 + 4 center points and optimization (using a design of type 2 2 + 2*2 + 4 center points; stages that allow explore a high acceptability formulation. Then we used the technique of Linear Programming to minimize the cost of high acceptability nectar. Result of this process was obtained a mixed nectar optimal acceptability (score of 7, when the formulation is between 9 and 14% of passion fruit, 4 and 5% of sucrose, 73.5% of sweet pepino juice and filling with water to the 100%. Linear Programming possible reduced the cost of nectar mixed with optimal acceptability at S/.174 for a production of 1000 L/day.

  7. SENSITIVITY ANALYSIS as a methodical approach to the development of design strategies for environmentally sustainable buildings

    DEFF Research Database (Denmark)

    Hansen, Hanne Tine Ring

    . The research methodology applied in the project combines a literature study of descriptions of methodical approaches and built examples with a sensitivity analysis and a qualitative interview with two designers from a best practice example of a practice that has achieved environmentally sustainable...... architecture, such as: ecological, green, bio-climatic, sustainable, passive, low-energy and environmental architecture. This PhD project sets out to gain a better understanding of environmentally sustainable architecture and the methodical approaches applied in the development of this type of architecture...... an increase in scientific and political awareness, which has lead to an escalation in the number of research publications in the field, as well as, legislative demands for the energy consumption of buildings. The publications in the field refer to many different approaches to environmentally sustainable...

  8. MOBILE ATOMIC ABSORPTION SPECTROMETER OPERATED BY PACE ENVIRONMENTAL FOR METALS-CONTAMINATED SOIL CHARACTERIZATION

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA), through the Environmental Technology Verification Program, is working to accelerate the acceptance and use of innovative technologies that improve the way the United States manages its environmental problems. This report describes ...

  9. Efficacy and acceptance of professional dental cleaning among nursing home residents.

    Science.gov (United States)

    Barbe, Anna Greta; Kottmann, Hannah Elisa; Hamacher, Stefanie; Derman, Sonja Henny Maria; Noack, Michael Johannes

    2018-05-13

    To determine the impact of general and oral health status of nursing home residents in Germany on efficacy and acceptance of professional dental cleaning performed by a dental nurse. Participants (N = 41; mean age 83 ± 8 years) living in a nursing home were included. Personal and general health, oral health, oral hygiene habits, and needs were investigated. Individual acceptance regarding professional dental cleaning via different devices (scaler, interdental brushes, ultrasonic cleaning) was assessed, as was the efficacy of this method using after-cleaning indices. Oral health among nursing home residents was impaired and independent from dementia status. Most residents (33/41) performed oral hygiene procedures independently and showed better index values than those in need of external help. Residents requiring help with oral hygiene showed increased risk profiles (higher age, more often immobile, demented, more xerostomia). The dental cleaning procedure required a mean time of 37 ± 11 min, was widely accepted (36/41), and achieved clean results (plaque index 0.1 ± 0.5, oral hygiene index 0.2 ± 1.6, Volpe-Manhold index 0.4 ± 1.6); food residues were reduced to 0 independent from cognitive status. Regarding the cleaning methods, scalers were accepted best without difference between demented and non-demented residents. Professional dental cleaning in nursing homes is an accepted and efficacious oral hygiene procedure among nursing home residents. Professional dental cleaning is an efficacious and accepted method as a first step in line with strategies to improve oral health and should be considered in nursing home residents.

  10. Environmental systems analysis of wastewater management

    International Nuclear Information System (INIS)

    Kaerrman, Erik

    2000-01-01

    The history of wastewater management tells us that efforts have been made at solving only one problem at the time; sanitation during the first half of the 20th Century followed by eutrophication of lakes and sea and, for the past ten years, recycling of nutrients. After the 'Brundtland Report', 1987, a reversal of the debate occurred where water management was discussed in a more holistic manner than before. The concept sustainable development became widely accepted and was put into practice. This thesis suggests a framework for evaluating the sustainability of wastewater systems, which contains the use of criteria and system analytical evaluation methods matching each criterion. The main categories of criteria are identified as: Health and Hygiene, Social and Cultural, Environmental, Economic and Functional and Technical. The usability of different concepts of Environmental Systems Analysis for evaluating environmental criteria of wastewater systems is also investigated. These studies show that a substance-flow model combined with evaluation methods from Life Cycle Assessment (LCA), sometimes complemented with Exergy Analysis or Analysis of Primary Energy, is a beneficial approach for evaluating environmental impacts and the usage of resources. The substance-flow model ORWARE (ORganic WAste REsearch) combined with LCA was used to compare four systems structures for the management of household wastewater and solid organic waste, namely Conventional System, Irrigation of Energy Forests, Liquid Composting and Urine Separation. This study shows a potential for further development of the three alternative systems. The comparative study also included some development of system analytical methods. This thesis shows how the contribution from oxidation of ammonia should be included in the eutrophication impact category. Furthermore, a method is given for prioritization of the most relevant impacts from wastewater management by using normalisation of these impacts in

  11. Harnessing the power of big data: infusing the scientific method with machine learning to transform ecology

    Science.gov (United States)

    Most efforts to harness the power of big data for ecology and environmental sciences focus on data and metadata sharing, standardization, and accuracy. However, many scientists have not accepted the data deluge as an integral part of their research because the current scientific method is not scalab...

  12. Efficient recovery of environmental DNA for expression cloning by indirect extraction methods

    NARCIS (Netherlands)

    Gabor, Esther; de Vries, Erik; Janssen, DB

    2003-01-01

    Using direct and cell extraction-based (indirect) isolation methods, DNA was obtained from environmental samples with largely differing characteristics (loam soil, sand soil, sediment, activated sludge, and compost) and evaluated with respect to the comprised bacterial diversity and its suitability

  13. Decreasing the overall environmental impact of the Dutch diet

    NARCIS (Netherlands)

    Kramer, Gerard F.H.; Tyszler, Marcelo; Veer, van 't Pieter; Blonk, Hans

    2017-01-01

    Objective: To find diets optimised on nutrition and environmental impact close to the current Dutch diet and to identify the most effective and acceptable options for mitigating environmental impact. Design: Linear programming was used to optimise diets of Dutch men and women aged 9–69 years,

  14. Behavioral, Personality, and Communicative Predictors of Acceptance and Popularity in Early Adolescence

    NARCIS (Netherlands)

    Wolters, N.; Knoors, H.E.T.; Cillessen, A.H.N.; Verhoeven, L.T.W.

    2014-01-01

    This study examined the behavioral, personality, and communicative predictors of acceptance and popularity in 608 early adolescents. Data were collected with sociometric methods and ratings in 30 sixth-grade classrooms. Hierarchical regressions were run to predict acceptance and popularity from

  15. Automatically generated acceptance test: A software reliability experiment

    Science.gov (United States)

    Protzel, Peter W.

    1988-01-01

    This study presents results of a software reliability experiment investigating the feasibility of a new error detection method. The method can be used as an acceptance test and is solely based on empirical data about the behavior of internal states of a program. The experimental design uses the existing environment of a multi-version experiment previously conducted at the NASA Langley Research Center, in which the launch interceptor problem is used as a model. This allows the controlled experimental investigation of versions with well-known single and multiple faults, and the availability of an oracle permits the determination of the error detection performance of the test. Fault interaction phenomena are observed that have an amplifying effect on the number of error occurrences. Preliminary results indicate that all faults examined so far are detected by the acceptance test. This shows promise for further investigations, and for the employment of this test method on other applications.

  16. Trace element analysis of environmental samples by multiple prompt gamma-ray analysis method

    International Nuclear Information System (INIS)

    Oshima, Masumi; Matsuo, Motoyuki; Shozugawa, Katsumi

    2011-01-01

    The multiple γ-ray detection method has been proved to be a high-resolution and high-sensitivity method in application to nuclide quantification. The neutron prompt γ-ray analysis method is successfully extended by combining it with the γ-ray detection method, which is called Multiple prompt γ-ray analysis, MPGA. In this review we show the principle of this method and its characteristics. Several examples of its application to environmental samples, especially river sediments in the urban area and sea sediment samples are also described. (author)

  17. Acceptability of healthcare interventions: an overview of reviews and development of a theoretical framework.

    Science.gov (United States)

    Sekhon, Mandeep; Cartwright, Martin; Francis, Jill J

    2017-01-26

    It is increasingly acknowledged that 'acceptability' should be considered when designing, evaluating and implementing healthcare interventions. However, the published literature offers little guidance on how to define or assess acceptability. The purpose of this study was to develop a multi-construct theoretical framework of acceptability of healthcare interventions that can be applied to assess prospective (i.e. anticipated) and retrospective (i.e. experienced) acceptability from the perspective of intervention delivers and recipients. Two methods were used to select the component constructs of acceptability. 1) An overview of reviews was conducted to identify systematic reviews that claim to define, theorise or measure acceptability of healthcare interventions. 2) Principles of inductive and deductive reasoning were applied to theorise the concept of acceptability and develop a theoretical framework. Steps included (1) defining acceptability; (2) describing its properties and scope and (3) identifying component constructs and empirical indicators. From the 43 reviews included in the overview, none explicitly theorised or defined acceptability. Measures used to assess acceptability focused on behaviour (e.g. dropout rates) (23 reviews), affect (i.e. feelings) (5 reviews), cognition (i.e. perceptions) (7 reviews) or a combination of these (8 reviews). From the methods described above we propose a definition: Acceptability is a multi-faceted construct that reflects the extent to which people delivering or receiving a healthcare intervention consider it to be appropriate, based on anticipated or experienced cognitive and emotional responses to the intervention. The theoretical framework of acceptability (TFA) consists of seven component constructs: affective attitude, burden, perceived effectiveness, ethicality, intervention coherence, opportunity costs, and self-efficacy. Despite frequent claims that healthcare interventions have assessed acceptability, it is

  18. Public Acceptance of Nuclear Energy in Mexico

    International Nuclear Information System (INIS)

    Ramirez-Sanchez, Jose R.; Alonso, Gustavo; Palacios, H. Javier

    2006-01-01

    The nuclear energy is attracting renewed interest of public and policy makers due to his potential role in long term strategies aiming to reduce the risk of global warming and in a more general, to carry out sustainable policies, however, any project of nuclear nature arise concerns about the risks associated with the release of radioactivity during accident conditions, radioactive waste disposal and nuclear weapons proliferation. Then in light of the likeliness for a new nuclear project in Mexico, is necessary to design a strategy to improve the social acceptance of nuclear power. This concern is been boarding since the environmental and economic point of view. The information that can change the perception of nuclear energy towards increase public acceptance, should be an honest debate about the benefits of nuclear energy, of course there are questions and they have to be answered, but in a realistic and scientific way: So thinking in Mexico as a first step it is important to communicate to the government entities and political parties that nuclear energy is a proven asset that it is emission free and safe. Of course besides the guarantee of a proven technology, clean and safe relies the economic fact, and in Mexico this could be the most important aspect to communicate to key people in government. Based in the Laguna Verde survey it is clear that we have to find the adequate means to distribute the real information concerning nuclear technology to the public, because the results shows that Mexican people does not have complete information about nuclear energy, but public can support it when they have enough information. From the IAEA study we can say that in Mexico public acceptance of nuclear energy it s not so bad, is the highest percentage of acceptance of nuclear technology for health, considering benefits to the environment Mexican opposition to build new plants is the second less percentage, and generally speaking 60% of the people accept somehow nuclear

  19. Methods for the Evaluation of Waste Treatment Processes

    Directory of Open Access Journals (Sweden)

    Hans-Joachim Gehrmann

    2017-01-01

    Full Text Available Decision makers for waste management are confronted with the problem of selecting the most economic, environmental, and socially acceptable waste treatment process. This paper elucidates evaluation methods for waste treatment processes for the comparison of ecological and economic aspects such as material flow analysis, statistical entropy analysis, energetic and exergetic assessment, cumulative energy demand, and life cycle assessment. The work is based on the VDI guideline 3925. A comparison of two thermal waste treatment plants with different process designs and energy recovery systems was performed with the described evaluation methods. The results are mainly influenced by the type of energy recovery, where the waste-to-energy plant providing district heat and process steam emerged to be beneficial in most aspects. Material recovery options from waste incineration were evaluated according to sustainability targets, such as saving of resources and environmental protection.

  20. Public perception and acceptance of the siting of nuclear waste facilities in seven countries

    International Nuclear Information System (INIS)

    Numark, N.J.; Paige, H.W.; Wonder, E.F.

    1989-09-01

    This report was prepared by ERC Environmental and Energy Services Co. (ERCE) on behalf of the Pacific Northwest Laboratory (PNL) and the US Department of Energy (DOE) between February and August 1989. It updates previous reports prepared by ERCE on public acceptance of waste management activities in foreign countries. The report is intended to serve as an aid in understanding experiences with public acceptance of waste activities in foreign countries, and thereby benefit US efforts with respect to public acceptance based on lessons learned abroad. Seven countries are addressed in the report: Belgium, the Federal Republic of Germany, France, Japan, Sweden, Switzerland, and the United Kingdom. The information provided in this report was obtained both from direct interviews of the responsible waste management officials in the seven countries surveyed and from source documents provided by these individuals

  1. A Bottom-up Approach to Environmental Cost-Benefit Analysis

    DEFF Research Database (Denmark)

    Carolus, Johannes Friedrich; Hanley, Nick; Olsen, Søren Bøye

    with the underlying environmental problem, and then assesses costs and benefits of various strategies and solutions suggested by local and directly affected stakeholders. For empirical case studies concerning two river catchments in Sweden and Latvia, the bottom-up CBA approach utilises local knowledge, assesses......Cost-Benefit Analysis is a method to assess the effects of policies and projects on social welfare. CBAs are usually applied in a top-down approach, in the sense that a decision-making body first decides on which policies or projects are to be considered, and then applies a set of uniform criteria...... plans which are not only developed for local conditions but are also likely to be more acceptable to local society, and sheds additional light on possible distributional effects. By not only benefitting from, but also supporting participative environmental planning, bottom-up CBA is in line...

  2. Factors Influencing Compensation Demanded for Environmental Impacts Generated by Different Economic Activities

    Directory of Open Access Journals (Sweden)

    Virna Vaneza Gutiérrez

    2015-07-01

    Full Text Available This work advances the understanding of compensation demanded for environmental impacts on atmosphere, lakes and rivers, soil, and ocean generated by mining, urban, fishing and agriculture activities. Our aims are to determine whether compensation demanded depends on the standard variables used in the field of risk perception (as perceived risk, public acceptability and trust in regulating authorities, and to explore whether these relationships depend on the environment affected and on the economic activity generating the impacts. General Linear Models were used to analyze survey responses from 427 citizens of Santiago, Chile. Results showed that compensation demanded depends on perceived risk, acceptability, and on the economic activity, but not on the environment affected. Acceptability depends on trust in authorities, on perceived risk and on the economic activity. Perceived risk depends on trust, the economic activity and the environment affected. Overall, environmental impacts from the mining industry are perceived as riskier, less acceptable, and have a higher compensation demanded than those generated by the other sectors. These results suggest that to achieve sustainable development, regulations should consider not only environmental impacts but also the economic activity originating them.

  3. Chinese Nurses' Acceptance of PDA: A Cross-Sectional Survey Using a Technology Acceptance Model.

    Science.gov (United States)

    Wang, Yanling; Xiao, Qian; Sun, Liu; Wu, Ying

    2016-01-01

    This study explores Chinese nurses' acceptance of PDA, using a questionnaire based on the framework of Technology Acceptance Model (TAM). 357 nurses were involved in the study. The results reveal the scores of the nurses' acceptance of PDA were means 3.18~3.36 in four dimensions. The younger of nurses, the higher nurses' title, the longer previous usage time, the more experienced using PDA, and the more acceptance of PDA. Therefore, the hospital administrators may change strategies to enhance nurses' acceptance of PDA, and promote the wide application of PDA.

  4. Defining criteria for good environmental journalism and testing their applicability: An environmental news review as a first step to more evidence based environmental science reporting.

    Science.gov (United States)

    Rögener, Wiebke; Wormer, Holger

    2017-05-01

    While the quality of environmental science journalism has been the subject of much debate, a widely accepted benchmark to assess the quality of coverage of environmental topics is missing so far. Therefore, we have developed a set of defined criteria of environmental reporting. This instrument and its applicability are tested in a newly established monitoring project for the assessment of pieces on environmental issues, which refer to scientific sources and therefore can be regarded as a special field of science journalism. The quality is assessed in a kind of journalistic peer review. We describe the systematic development of criteria, which might also be a model procedure for other fields of science reporting. Furthermore, we present results from the monitoring of 50 environmental reports in German media. According to these preliminary data, the lack of context and the deficient elucidation of the evidence pose major problems in environmental reporting.

  5. [Acceptance and mindfulness-based cognitive-behavioral therapies].

    Science.gov (United States)

    Ngô, Thanh-Lan

    2013-01-01

    Cognitive behavioral therapy (CBT) is one of the main approaches in psychotherapy. It teaches the patient to examine the link between dysfunctional thoughts and maladaptive behaviors and to re- evaluate the cognitive biases involved in the maintenance of symptoms by using strategies such as guided discovery. CBT is constantly evolving in part to improve its' effectiveness and accessibility. Thus in the last decade, increasingly popular approaches based on mindfulness and acceptance have emerged. These therapies do not attempt to modify cognitions even when they are biased and dysfunctional but rather seek a change in the relationship between the individual and the symptoms. This article aims to present the historical context that has allowed the emergence of this trend, the points of convergence and divergence with traditional CBT as well as a brief presentation of the different therapies based on mindfulness meditation and acceptance. Hayes (2004) described three successive waves in behavior therapy, each characterized by "dominant assumptions, methods and goals": traditional behavior therapy, cognitive therapy and therapies based on mindfulness meditation and acceptance. The latter consider that human suffering occurs when the individual lives a restricted life in order avoid pain and immediate discomfort to the detriment of his global wellbeing. These therapies combine mindfulness, experiential, acceptance strategies with traditional behavior principles in order to attain lasting results. There are significant points of convergence between traditional CBT and therapies based on mindfulness meditation and acceptance. They are both empirically validated, based upon a theoretical model postulating that avoidance is key in the maintenance of psychopathology and they recommend an approach strategy in order to overcome the identified problem. They both use behavioral techniques in the context of a collaborative relationship in order to identify precise problems and to

  6. Acceptability and perception of Kisumu city college students on ...

    African Journals Online (AJOL)

    Objective: This study was designed to determine factors influencing acceptability and perception of college students on induced abortion and its legalization. Method: The study was a cross-sectional descriptive survey where both qualitative and quantitative data collection methods were used. The survey was carried out in ...

  7. The Social Acceptance of Community Solar: A Portland Case Study

    Science.gov (United States)

    Weaver, Anne

    exhibited interest in community solar enrollment. The logistic regression model revealed the percent change in utility bill (essentially the rate of return on the community solar investment) as a dramatically influential variable predicting willingness to participate. Community solar project scenarios also had a strong influence on willingness to participate: larger, cheaper, and distant projects were preferred over small and expensive local projects. Results indicate that community solar project features that accentuate affordability are most important to energy consumers. Additionally, demographic characteristics that were strongly correlated with willingness to enroll were politically liberal ideologies, higher incomes, current enrollment in green utility programs, and membership in an environmental organization. Thus, the market acceptance of community solar in Portland will potentially be broadened by emphasizing affordability over other features, such as community and locality. Additionally, I explored attitudinal influences on interest in community solar by conducting exploratory factor analysis on attitudes towards energy, climate change, and solar barriers and subsequently conducting binomial logistic regression models. Results found that perceiving renewable energy as environmentally beneficial was positively correlated with intent to enroll in community solar, which supported the notion that environmental attitudes will lead to environmental behaviors. The logistic regression model also revealed a negative correlation between community solar interest and negative attitudes towards renewable energy. Perceptions of solar barriers were mild, indicating that lack of an enabling mechanism may be the reason solar continues to be underutilized in this region.

  8. Environmental friendly method for the extraction of coir fibre and isolation of nanofibre.

    Science.gov (United States)

    Abraham, Eldho; Deepa, B; Pothen, L A; Cintil, J; Thomas, S; John, M J; Anandjiwala, R; Narine, S S

    2013-02-15

    The objective of this work was to develop an environmental friendly method for the effective utilization of coir fibre by adopting steam pre-treatment. The retting of the coconut bunch makes strong environmental problems which can be avoided by this method. Chemical characterization of the fibre during each processing stages confirmed the increase of cellulose content from raw (40%) to final steam treated fibres (93%). Morphological and dynamic light scattering analyses of the fibres at different processing stages revealed that the isolation of cellulose nano fibres occur in the final step of the process as an aqueous suspension. FT-IR and XRD analysis demonstrated that the treatments lead to the gradual removal of lignin and hemicelluloses from the fibres. The existence of strong lignin-cellulose complex in the raw coir fibre is proved by its enhanced thermal stability. Steam explosion has been proved to be a green method to expand the application areas of coir fibre. Copyright © 2012 Elsevier Ltd. All rights reserved.

  9. Treatments for irritable bowel syndrome: patients' attitudes and acceptability

    Directory of Open Access Journals (Sweden)

    Roberts Lesley

    2008-12-01

    Full Text Available Abstract Background Irritable Bowel Syndrome, a highly prevalent chronic disorder, places significant burden on the health service and the individual. Symptomatic distress and reduced quality of life are compounded by few efficacious treatments available. As researchers continue to demonstrate the clinical efficacy of alternative therapies, it would be useful to gain a patient-perspective of treatment acceptability and identify patient's attitudes towards those modalities considered not acceptable. Methods Six hundred and forty-five participants identified from an earlier IBS-prevalence study received a postal questionnaire to evaluate preferences and acceptability of nine forms of treatment. Proportions accepting each form of treatment were calculated and thematic analysis of qualitative data undertaken. Results A total of 256 (39.7% of 645 potential respondents completed the questionnaire (mean age 55.9 years, 73% female. Tablets were most acceptable (84%, followed by lifestyle changes (diet (82%, yoga (77%. Acupuncture (59% and suppositories (57% were less acceptable. When explaining lack of acceptability, patient views fell into four broad categories: dislike treatment modality, do not perceive benefit, general barriers and insufficient knowledge. Scepticism, lack of scientific rationale and fear of CAM were mentioned, although others expressed a dislike of conventional medical treatments. Past experiences, age and health concerns, and need for proof of efficacy were reported. Conclusion Most patients were willing to accept various forms of treatment. However, the reservations expressed by this patient-population must be recognised with particular focus directed towards allaying fears and misconceptions, seeking further evidence base for certain therapies and incorporating physician support and advice.

  10. Intercomparison of measuring and evaluation methods for environmental radiations

    International Nuclear Information System (INIS)

    Saito, Kimiaki; Nagaoka, Toshi; Sakamoto, Ryuichi; Tsutsumi, Masahiro; Moriuchi, Shigeru; Okano, Masaharu.

    1990-11-01

    This report presents the results of the cooperative research by IPCR and JAERI. In order to investigate the accuracy and characteristics of the measurement and evaluation methods for environmental radiations, developed independently by IPCR and by JAERI, field experiments were performed using the both methods under the same conditions at the same time. The experiments were performed at fixed points on the ground, in a moving car and in a flying helicopter. Discussion was made on the basis of the comparison of the results from the both methods. The exposure rates from the IPCR method agreed within 10% with those from the JAERI method, however the former were systematically higher than the latter. Since the evaluated exposure rate components due to 238 U-series, 232 Th-series and 40 K showed apparent differences between the IPCR method and the JAERI method, further investigation is necessary for the positions and widths of the applied energy bands and the coefficients in the equations to evaluate the components. In measurements in a moving vehicle, the sequential data should be gathered per sufficiently short distance to distinguish the local change of the radiation level when it changes greatly according to the location. The aerial data showed that the exposure rates from terrestrial gamma rays in the region west of the Abe river are apparently higher than those in the Kanto district. (author)

  11. Patients’ acceptance of corticotomy-assisted orthodontics

    Science.gov (United States)

    Zawawi, Khalid H

    2015-01-01

    Objective To study patients’ acceptance of corticotomy-assisted orthodontics as a treatment option. Methods Adult patients seeking orthodontic treatment were asked to complete two sets of questionnaires; the first set included questions about age, sex, and level of education and general questions about orthodontic treatment; and the second set was related to the corticotomy-assisted orthodontics. Before answering the corticotomy questions, a brief description of the clinical procedure was explained and photographs of an actual procedure were shown. Results A total of 150 subjects were approached and 129 (86%) agreed to answer the questionnaires (72 male and 57 female patients). Of these, only 3.1% did hear about corticotomy and 7.8% selected corticotomy instead of extraction. Fear from the surgery (53.2%) was the most frequent reason for not selecting corticotomy followed by fear from pain (36.9%). The acceptance of corticotomy between males and females was similar. No relationship was found between the level of education and prior knowledge of the procedure, P=0.857. Prior knowledge about corticotomy was not a factor in selecting it as a treatment option (P=0.556) to reduce the treatment time (P=0.427). Conclusion The acceptance of corticotomy-assisted orthodontics as a treatment option was low. Fear from the surgery was the main reason for not selecting it. The acceptance of corticotomy-assisted orthodontics was not related to patient’s level of education or sex. PMID:26316719

  12. Validity and Reliability of the Turkish Chronic Pain Acceptance Questionnaire

    Directory of Open Access Journals (Sweden)

    Hazel Ekin Akmaz

    2018-05-01

    Full Text Available Background: Pain acceptance is the process of giving up the struggle with pain and learning to live a worthwhile life despite it. In assessing patients with chronic pain in Turkey, making a diagnosis and tracking the effectiveness of treatment is done with scales that have been translated into Turkish. However, there is as yet no valid and reliable scale in Turkish to assess the acceptance of pain. Aims: To validate a Turkish version of the Chronic Pain Acceptance Questionnaire developed by McCracken and colleagues. Study Design: Methodological and cross sectional study. Methods: A simple randomized sampling method was used in selecting the study sample. The sample was composed of 201 patients, more than 10 times the number of items examined for validity and reliability in the study, which totaled 20. A patient identification form, the Chronic Pain Acceptance Questionnaire, and the Brief Pain Inventory were used to collect data. Data were collected by face-to-face interviews. In the validity testing, the content validity index was used to evaluate linguistic equivalence, content validity, construct validity, and expert views. In reliability testing of the scale, Cronbach’s α coefficient was calculated, and item analysis and split-test reliability methods were used. Principal component analysis and varimax rotation were used in factor analysis and to examine factor structure for construct concept validity. Results: The item analysis established that the scale, all items, and item-total correlations were satisfactory. The mean total score of the scale was 21.78. The internal consistency coefficient was 0.94, and the correlation between the two halves of the scale was 0.89. Conclusion: The Chronic Pain Acceptance Questionnaire, which is intended to be used in Turkey upon confirmation of its validity and reliability, is an evaluation instrument with sufficient validity and reliability, and it can be reliably used to examine patients’ acceptance

  13. Public acceptance of nuclear power in Japan

    International Nuclear Information System (INIS)

    Iguchi, T.

    1995-01-01

    Japan has a fragile energy supply structure, with 84% of its energy depending on import; for example, 99.6% of the oil comes from overseas, which makes Japan's economic base rather vulnerable. In order to ensure constant energy supply, it is indispensable to diversify the energy sources and to create indigenous energy. In view of this, nuclear energy is considered to be the main alternative to crude oil because it has several advantages over other energy sources, such as stable supply of uranium and the fact that it is compatible with efforts to find solutions to global environmental problems. However, since the general public is not familiar with nuclear technology, it is difficult to get the understanding and co-operation of people. In view of this, public relations activities providing information on the need and safety of nuclear power generation have been performed. As a result, in recent years, about 70% of the people came to recognize the need for nuclear power generation. Although people's recognition of this need has increased substantially, it is still difficult for them to accept the construction of nuclear facilities, because of their anxiety regarding the safety of such plants and the lack of information by the government and electric utilities. This makes the acquisition of new sites for nuclear power plants difficult, so that the time required for developing such plants becomes longer. In order to eliminate people's anxieties, both the government and electric utilities should provide accurate information, at the proper time and using a method that makes it easy for the people to understand the problems involved. It is also important for the government and the electric utilities to listen carefully to the opinions and questions of people and to increase friendly communications with them. The government, electric utilities and constructors of nuclear facilities have to co-operate in order to improve the measures taken to gain public acceptance of

  14. Reevaluating NIMBY: Evolving Public Fear and Acceptance in Siting a Nuclear Waste Facility

    Energy Technology Data Exchange (ETDEWEB)

    Jenkins-Smith, Hank C.; Silva, Carol L.; Nowlin, Matthew C.; deLozier, Grant (Dept. of Political Science, Univ. of Oklahoma, Norman, OK (United States))

    2010-09-15

    The not-in-my-backyard (NIMBY) syndrome has long been the focus of academic and policy research. We test several competing hypothesis concerning the sources of NIMBY sentiments, including demographics, proximity, political ideology and partisanship, and the unfolding policy process over time. To test these hypotheses we use survey data collected in New Mexico dealing with risk perceptions and acceptance related to the Waste Isolation Pilot Project (WIPP), a permanent storage site for radioactive waste located near Carlsbad, New Mexico. WIPP became operational and received its first shipment of waste on March 26, 1999. This study tracks the changes of risk perception and acceptance over a decade, using measures taken from 35 statewide surveys of New Mexico citizens spanning the 11-year period from fall 1990 to summer 2001. This time span includes periods before and after WIPP became operational. We find that acceptance of WIPP is greater among those in the most proximate counties to WIPP. Surprisingly, and contrary to expectations drawn from the broader literature, acceptance is also greater among those who live closest to the nuclear waste transportation route. We also find that ideology, partisanship, government approval and broader environmental concerns influence support for WIPP acceptance. Finally, the sequence of procedural steps taken toward formal approval of WIPP by government agencies proved to be important to public acceptance, the most significant being the opening of the WIPP facility itself

  15. Reevaluating NIMBY: Evolving Public Fear and Acceptance in Siting a Nuclear Waste Facility

    International Nuclear Information System (INIS)

    Jenkins-Smith, Hank C.; Silva, Carol L.; Nowlin, Matthew C.; de Lozier, Grant

    2010-09-01

    The not-in-my-backyard (NIMBY) syndrome has long been the focus of academic and policy research. We test several competing hypothesis concerning the sources of NIMBY sentiments, including demographics, proximity, political ideology and partisanship, and the unfolding policy process over time. To test these hypotheses we use survey data collected in New Mexico dealing with risk perceptions and acceptance related to the Waste Isolation Pilot Project (WIPP), a permanent storage site for radioactive waste located near Carlsbad, New Mexico. WIPP became operational and received its first shipment of waste on March 26, 1999. This study tracks the changes of risk perception and acceptance over a decade, using measures taken from 35 statewide surveys of New Mexico citizens spanning the 11-year period from fall 1990 to summer 2001. This time span includes periods before and after WIPP became operational. We find that acceptance of WIPP is greater among those in the most proximate counties to WIPP. Surprisingly, and contrary to expectations drawn from the broader literature, acceptance is also greater among those who live closest to the nuclear waste transportation route. We also find that ideology, partisanship, government approval and broader environmental concerns influence support for WIPP acceptance. Finally, the sequence of procedural steps taken toward formal approval of WIPP by government agencies proved to be important to public acceptance, the most significant being the opening of the WIPP facility itself

  16. THE APPLICATION OF THE METHOD ENVIRONMENTAL VALUE AT RISK (EVaR IN ENVIRONMENTAL ECONOMY

    Directory of Open Access Journals (Sweden)

    Gabriela Cornelia I. PICIU

    2014-04-01

    Full Text Available Taking into account the fact that the methodology Value at Risk or the method VaR, which is omnipresent in investment banking and which has lately become a standard in the procedure of evaluating risks for any category of economic activities, we shall use a technique that is compatible with the VaR-market, called Environmental Value at Risk or EvaR. While the VaR- market uses a level of trust of 95%, the EvaR uses a set of levels up to 99,999%. Thus, we shall try to analyze the variables of the method EVaR, and the way in which this model can be applied as a risk of the lack (rarity of petroleum. This risk is not only analyzed as a unique risk of growing the prices, but also as an uncertainty risk on volatile markets, in which the price and the volatility are the main variables used by the function EVaR.

  17. Acceptable risk in reactor safety studies

    International Nuclear Information System (INIS)

    Benjamin, J.R.; Shinozuka, M.; Shah, H.C.

    1975-01-01

    Acceptable risk is defined in terms of its five basic parameters: the hazard or problem; the probability of occurrence; the consequence; the possible alternative actions; and the value system of the community or the society. The problem of consistency in design at a site and between differing sites is discussed and solutions are suggested. Techniques for consistent deterministic and probabilistic setting limits and design standards are illustrated using data from AEC Reactor Safety Study, WASH-1400. The influence of level of consequence is discussed and a general methodology for decision analysis in resource allocation problem is briefly introduced and illustrated. The concept of acceptable risk is put in a quantitative format that can be used by engineers and planners. Bayesian statistical methods are introduced to develop the methodologies

  18. Evaluation of communication and acceptance of the patients by medical personnel

    Science.gov (United States)

    Włoszczak-Szubzda, Anna; Jarosz, Mirosław J; Goniewicz, Mariusz; Goniewicz, Krzysztof

    The low level of patient satisfaction recorded in many studies and, at the same time, the level of frustration and burnout, disclosed by medics in the perception of the patient as a ‘problem’, incline to look for the causes of inadequate relationship between physician and patient. The aim of this study was to evaluate the level of acceptance of the patient by the medical personnel. The research problem was the acceptance level which was within the range of the communication skills of the nurses and doctors. Another aim was to discover the factors determining this level of acceptance. Two methods were used in the research process: 1) a diagnostic survey regarding the medical, professional communication skills; 2) testing of professional self-esteem from the medical aspect. The study population consisted of a total of 1,244 respondents divided into the following groups: registered nurses and doctors (729), students of nursing and medical faculties (515). The results of the research showed that in most cases the acceptance of the patient by the medical staff was ‘conditional’, which translated into the level of frustration or lack of satisfaction with their profession, and ultimately into the level of burnout. The level of patient acceptance by medical staff (unconditional acceptance), depended primarily on age, followed by their profession. However, the relationship between this acceptance and gender and work experience was statistically insignificant. As the method to improve this situation, the expansion of education in the field of interpersonal communication is proposed, adding issues related with both the conditional and unconditional acceptance of the patient, as well as issues regarding how to deal with the patient from the aspect of disease and the psycho-socio-spiritual area.

  19. PFAS methods and guidance for sampling and analyzing water and other environmental media (Technical Brief)

    Science.gov (United States)

    EPA's methods for analyzing PFAS in environmental media are in various stages of development. This fact sheet summarizes EPA's analytical methods development for groundwater, surface water, wastewater, and solids, including soils, sediments, and biosolids

  20. Age and Acceptance of Euthanasia.

    Science.gov (United States)

    Ward, Russell A.

    1980-01-01

    Study explores relationship between age (and sex and race) and acceptance of euthanasia. Women and non-Whites were less accepting because of religiosity. Among older people less acceptance was attributable to their lesser education and greater religiosity. Results suggest that quality of life in old age affects acceptability of euthanasia. (Author)

  1. Acceptability of Mental Health Apps for Aboriginal and Torres Strait Islander Australians: A Qualitative Study.

    Science.gov (United States)

    Povey, Josie; Mills, Patj Patj Janama Robert; Dingwall, Kylie Maree; Lowell, Anne; Singer, Judy; Rotumah, Darlene; Bennett-Levy, James; Nagel, Tricia

    2016-03-11

    Aboriginal and Torres Strait Islander Australians experience high rates of mental illness and psychological distress compared to their non-Indigenous counterparts. E-mental health tools offer an opportunity for accessible, effective, and acceptable treatment. The AIMhi Stay Strong app and the ibobbly suicide prevention app are treatment tools designed to combat the disproportionately high levels of mental illness and stress experienced within the Aboriginal and Torres Strait Islander community. This study aimed to explore Aboriginal and Torres Strait Islander community members' experiences of using two culturally responsive e-mental health apps and identify factors that influence the acceptability of these approaches. Using qualitative methods aligned with a phenomenological approach, we explored the acceptability of two culturally responsive e-mental health apps through a series of three 3-hour focus groups with nine Aboriginal and Torres Strait Islander community members. Thematic analysis was conducted and coresearcher and member checking were used to verify findings. Findings suggest strong support for the concept of e-mental health apps and optimism for their potential. Factors that influenced acceptability related to three key themes: personal factors (eg, motivation, severity and awareness of illness, technological competence, and literacy and language differences), environmental factors (eg, community awareness, stigma, and availability of support), and app characteristics (eg, ease of use, content, graphics, access, and security and information sharing). Specific adaptations, such as local production, culturally relevant content and graphics, a purposeful journey, clear navigation, meaningful language, options to assist people with language differences, offline use, and password protection may aid uptake. When designed to meet the needs of Aboriginal and Torres Strait Islander Australians, e-mental health tools add an important element to public health

  2. An investigation into waste charges in Ireland, with emphasis on public acceptability.

    Science.gov (United States)

    Dunne, Louise; Convery, Frank J; Gallagher, Louise

    2008-12-01

    There are 34 local authorities in Ireland with legal responsibility to deal with waste arising in their jurisdictions. In 2003 the National government introduced legislation that allows local authorities to recover the costs of waste collection and disposal, and to do so by 'executive function', i.e., not requiring support or agreement by the relevant local political representatives. The year 2005 was set as the date by which implementation of a pay by weight or volume was to be introduced. The local authorities were given autonomy as to how they addressed this challenge, so we have - in theory - 34 potentially different experiences from which to learn. This paper examines the pay-as-you-throw (PAYT) waste system in Ireland as it develops in line with EU and National demands, with a view to assessing economic and environmental efficiency. All local authorities were surveyed and thirteen responded. While this only represents about 38% of the total number, it includes jurisdictions that contribute in total more than 50% of waste arising. Key figures in the policy and business community were also interviewed in order to identify how the charging schemes were implemented, and to what effect. These insights and parallel investigations are used to review the potential for problems regarding public acceptability of environmental taxes and examine the evidence for economic and environmental efficiency, as well as problem areas, using data from each of the responding local authority jurisdictions. Concentrating on the incentives and drivers across households, municipalities and private waste contractors, the variations in charging system, annual charges and landfill charges are compared where information was available. The various jurisdictions are also examined in terms of relative successes and problems encountered in the transition from fixed charge or free waste collection to PAYT systems. The Irish situation is placed in the context of the international literature on

  3. Acquiring Data by Mining the Past: Pairing Communities with Environmental Monitoring Methods through Open Online Collaborative Replication

    Science.gov (United States)

    Lippincott, M.; Lewis, E. S.; Gehrke, G. E.; Wise, A.; Pyle, S.; Sinatra, V.; Bland, G.; Bydlowski, D.; Henry, A.; Gilberts, P. A.

    2016-12-01

    Community groups are interested in low-cost sensors to monitor their environment. However, many new commercial sensors are unknown devices without peer-reviewed evaluations of data quality or pathways to regulatory acceptance, and the time to achieve these outcomes may be beyond a community's patience and attention. Rather than developing a device from scratch or validating a new commercial product, a workflow is presented whereby existing technologies, especially those that are out of patent, are replicated through open online collaboration between communities affected by environmental pollution, volunteers, academic institutions, and existing open hardware and open source software projects. Technology case studies will be presented, focusing primarily on a passive PM monitor based on the UNC Passive Monitor. Stages of the project will be detailed moving from identifying community needs, reviewing existing technology, partnership development, technology replication, IP review and licensing, data quality assurance (in process), and field evaluation with community partners (in process), with special attention to partnership development and technology review. We have leveraged open hardware and open source software to lower the cost and access barriers of existing technologies for PM10-2.5 and other atmospheric measures that have already been validated through peer review. Existing validation of and regulatory familiarity with a technology enables a rapid pathway towards collecting data, shortening the time it takes for communities to leverage data in environmental management decisions. Online collaboration requires rigorous documentation that aids in spreading research methods and promoting deep engagement by interested community researchers outside academia. At the same time, careful choice of technology and the use of small-scale fabrication through laser cutting, 3D printing, and open, shared repositories of plans and software enables educational engagement that

  4. Long-acting reversible contraceptive acceptability and unintended pregnancy among women presenting for short-acting methods: a randomized patient preference trial.

    Science.gov (United States)

    Hubacher, David; Spector, Hannah; Monteith, Charles; Chen, Pai-Lien; Hart, Catherine

    2017-02-01

    Measures of contraceptive effectiveness combine technology and user-related factors. Observational studies show higher effectiveness of long-acting reversible contraception compared with short-acting reversible contraception. Women who choose long-acting reversible contraception may differ in key ways from women who choose short-acting reversible contraception, and it may be these differences that are responsible for the high effectiveness of long-acting reversible contraception. Wider use of long-acting reversible contraception is recommended, but scientific evidence of acceptability and successful use is lacking in a population that typically opts for short-acting methods. The objective of the study was to reduce bias in measuring contraceptive effectiveness and better isolate the independent role that long-acting reversible contraception has in preventing unintended pregnancy relative to short-acting reversible contraception. We conducted a partially randomized patient preference trial and recruited women aged 18-29 years who were seeking a short-acting method (pills or injectable). Participants who agreed to randomization were assigned to 1 of 2 categories: long-acting reversible contraception or short-acting reversible contraception. Women who declined randomization but agreed to follow-up in the observational cohort chose their preferred method. Under randomization, participants chose a specific method in the category and received it for free, whereas participants in the preference cohort paid for the contraception in their usual fashion. Participants were followed up prospectively to measure primary outcomes of method continuation and unintended pregnancy at 12 months. Kaplan-Meier techniques were used to estimate method continuation probabilities. Intent-to-treat principles were applied after method initiation for comparing incidence of unintended pregnancy. We also measured acceptability in terms of level of happiness with the products. Of the 916

  5. Acceptance of Nordic snack bars in children aged 8–11 years

    Directory of Open Access Journals (Sweden)

    Anna Holmer

    2012-04-01

    Full Text Available Background: A health promoting diet is suggested to be tailored to regional circumstances to preserve the cultural diversity in eating habits, as well as contribute to more environmentally friendly eating. It may influence consumer acceptance, however, if the components of the diet differs considerably from their habitual food. Objective: This study aimed to investigate whether snack bars composed of Nordic ingredients were accepted by 8–11 year-old Danish (n=134 and Swedish (n=109 children.Design: A seven-point hedonic scale was used to measure the children's acceptance of five snack bars that varied in their composition of whole grains, berries and nuts. A preference rank ordering of the five bars was also performed. Results: The results showed that samples that were rated highest in liking and were most preferred in both countries were a kamut/pumpkin bar and an oat/cranberry bar. The sample with the lowest rating that was also least preferred was a pumpernickel/sea buckthorn bar. Flavour was the most important determinant of overall liking followed by texture, odour and appearance. Conclusions: Children's acceptances and preferences were highly influenced by the sensory characteristics of the bars, mainly flavour. In agreement with earlier studies, the novel food ingredients seemed to influence children's preferences. The Nordic snack bars may have a potential to be a snack option for Danish and Swedish school children, but repeated exposures to the products are recommended to increase children's acceptance.

  6. An electron microscopy based method for the detection and quantification of nanomaterial number concentration in environmentally relevant media

    Energy Technology Data Exchange (ETDEWEB)

    Prasad, A. [School of Geography, Earth and Environmental Sciences, College of Life and Environmental Sciences, University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom); Lead, J.R., E-mail: jlead@mailbox.sc.edu [School of Geography, Earth and Environmental Sciences, College of Life and Environmental Sciences, University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom); Center for Environmental Nanoscience and Risk, Department of Environmental Health Sciences, Arnold School of Public Health, University South Carolina, Columbia 29208, SC (United States); Baalousha, M., E-mail: mbaalous@mailbox.sc.edu [Center for Environmental Nanoscience and Risk, Department of Environmental Health Sciences, Arnold School of Public Health, University South Carolina, Columbia 29208, SC (United States)

    2015-12-15

    Improved detection and characterization of nanomaterials (NMs) in complex environmental media requires the development of novel sampling approaches to improve the detection limit to be close to environmentally realistic concentrations. Transmission electron microscopy (TEM) is an indispensable metrological tool in nanotechnology and environmental nanoscience due to its high spatial resolution and analytical capabilities when coupled to spectroscopic techniques. However, these capabilities are hampered by the conventional sample preparation methods, which suffer from low NM recovery. The current work presents a validated, fully quantitative sampling technique for TEM that overcomes conventional sample preparation shortcomings, and thus enables the use of TEM for measurement of particle number concentration and their detection in complex media at environmentally realistic concentrations. This sampling method is based on ultracentrifugation of NMs from suspension onto a poly-L-lysine (PLL) functionalized TEM grid, using active deposition (by ultracentrifugation) and retention (by PLL interactions with NM surface) of NMs on the substrate, enabling fully quantitative analysis. Similar analysis with AFM was satisfactory in simple media but the lack of chemical-selectivity of AFM limits its applicability for the detection of NMs in complex environmental samples. The sampling approach was validated using both citrate- and PVP-coated AuNMs in pure water, which demonstrated an even distribution of NM on the TEM grid and high NM recovery (80–100%) at environmentally relevant NM concentrations (ca. 0.20–100 μg L{sup −1}). The applicability of the sampling method to complex environmental samples was demonstrated by the quantification of particle number concentration of AuNMs in EPA soft water (with and without Suwannee River fulvic acid) and lake water. This sample preparation approach is also applicable to other types of NMs with some modifications (e.g. centrifugation

  7. An electron microscopy based method for the detection and quantification of nanomaterial number concentration in environmentally relevant media

    International Nuclear Information System (INIS)

    Prasad, A.; Lead, J.R.; Baalousha, M.

    2015-01-01

    Improved detection and characterization of nanomaterials (NMs) in complex environmental media requires the development of novel sampling approaches to improve the detection limit to be close to environmentally realistic concentrations. Transmission electron microscopy (TEM) is an indispensable metrological tool in nanotechnology and environmental nanoscience due to its high spatial resolution and analytical capabilities when coupled to spectroscopic techniques. However, these capabilities are hampered by the conventional sample preparation methods, which suffer from low NM recovery. The current work presents a validated, fully quantitative sampling technique for TEM that overcomes conventional sample preparation shortcomings, and thus enables the use of TEM for measurement of particle number concentration and their detection in complex media at environmentally realistic concentrations. This sampling method is based on ultracentrifugation of NMs from suspension onto a poly-L-lysine (PLL) functionalized TEM grid, using active deposition (by ultracentrifugation) and retention (by PLL interactions with NM surface) of NMs on the substrate, enabling fully quantitative analysis. Similar analysis with AFM was satisfactory in simple media but the lack of chemical-selectivity of AFM limits its applicability for the detection of NMs in complex environmental samples. The sampling approach was validated using both citrate- and PVP-coated AuNMs in pure water, which demonstrated an even distribution of NM on the TEM grid and high NM recovery (80–100%) at environmentally relevant NM concentrations (ca. 0.20–100 μg L"−"1). The applicability of the sampling method to complex environmental samples was demonstrated by the quantification of particle number concentration of AuNMs in EPA soft water (with and without Suwannee River fulvic acid) and lake water. This sample preparation approach is also applicable to other types of NMs with some modifications (e.g. centrifugation

  8. Behavioral, Personality, and Communicative Predictors of Acceptance and Popularity in Early Adolescence

    Science.gov (United States)

    Wolters, Nina; Knoors, Harry; Cillessen, Antonius H. N.; Verhoeven, Ludo

    2014-01-01

    This study examined the behavioral, personality, and communicative predictors of acceptance and popularity in 608 early adolescents. Data were collected with sociometric methods and ratings in 30 sixth-grade classrooms. Hierarchical regressions were run to predict acceptance and popularity from prosocial, antisocial, and withdrawn behavior,…

  9. An environmentally-friendly fluorescent method for quantification of lipid contents in yeast

    DEFF Research Database (Denmark)

    Severo Poli, Jandora; Lützhøft, Hans-Christian Holten; Karakashev, Dimitar Borisov

    2014-01-01

    lipid and the calibration curve showed linearity (R2 = 0.994) between 0.50 and 25 mg/L. Compared with traditional gravimetric analysis, the developed method is much faster and uses less organic solvents. Lipid contents determined by fluorescence and gravimetry were the same for some strains......This study aimed at developing an efficient, fast and environmentally-friendly method to quantify neutral lipid contents in yeast. After optimising the fluorescence instrument parameters and influence of organic solvent concentrations, a new method to quantify neutral lipids in yeast based......, but for other strains the lipid contents determined by fluorescence were less. This new method will therefore be suitable for fast screening purposes....

  10. A New Computationally Frugal Method For Sensitivity Analysis Of Environmental Models

    Science.gov (United States)

    Rakovec, O.; Hill, M. C.; Clark, M. P.; Weerts, A.; Teuling, R.; Borgonovo, E.; Uijlenhoet, R.

    2013-12-01

    Effective and efficient parameter sensitivity analysis methods are crucial to understand the behaviour of complex environmental models and use of models in risk assessment. This paper proposes a new computationally frugal method for analyzing parameter sensitivity: the Distributed Evaluation of Local Sensitivity Analysis (DELSA). The DELSA method can be considered a hybrid of local and global methods, and focuses explicitly on multiscale evaluation of parameter sensitivity across the parameter space. Results of the DELSA method are compared with the popular global, variance-based Sobol' method and the delta method. We assess the parameter sensitivity of both (1) a simple non-linear reservoir model with only two parameters, and (2) five different "bucket-style" hydrologic models applied to a medium-sized catchment (200 km2) in the Belgian Ardennes. Results show that in both the synthetic and real-world examples, the global Sobol' method and the DELSA method provide similar sensitivities, with the DELSA method providing more detailed insight at much lower computational cost. The ability to understand how sensitivity measures vary through parameter space with modest computational requirements provides exciting new opportunities.

  11. 49 CFR 1200.2 - Adoption of generally accepted accounting principles issued by the Financial Accounting Standards...

    Science.gov (United States)

    2010-10-01

    ... principles issued by the Financial Accounting Standards Board (FASB). 1200.2 Section 1200.2 Transportation... COMMERCE ACT § 1200.2 Adoption of generally accepted accounting principles issued by the Financial... Financial Accounting Standards by the FASB, and provided that the Office of Economics, Environmental...

  12. Environmental Management Assessment of the Fernald Environmental Management Project (FEMP)

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    This report documents the results of the Environmental Management Assessment performed at the Fernald Environmental Management Project (FEMP) in Fernald, Ohio. During this assessment, the activities conducted by the assessment team included review of internal documents and reports from previous audits and assessments; interviews with US Department of Energy (DOE) and FEMP contractor personnel; and inspection and observation of selected facilities and operations. The onsite portion of the assessment was conducted from March 15 through April 1, 1993, by DOE`s Office of Environmental Audit (EH-24) located within the Office of the Assistant Secretary for Environment, Safety, and Health (EH-1). EH-24 carries out independent assessments of DOE facilities and activities as part of the EH-1 Environment, Safety, and Health (ES&H) Oversight Audit Program. The EH-24 program is designed to evaluate the status of DOE facilities and activities with respect to compliance with Federal, state, and local environmental laws and regulations; compliance with DOE Orders, Guidance and Directives; conformance with accepted industry practices and standards of performance; and the status and adequacy of management systems developed to address environmental requirements. The Environmental Management Assessment of FEMP focused on the adequacy of environmental management systems. Further, in response to requests by the Office of Environmental Restoration and Waste Management (EM) and Fernald Field Office (FN), Quality Assurance and Environmental Radiation activities at FEMP were evaluated from a programmatic standpoint. The results of the evaluation of these areas are contained in the Environmental Protection Programs section in this report.

  13. Environmental Management Assessment of the Fernald Environmental Management Project (FEMP)

    International Nuclear Information System (INIS)

    1993-04-01

    This report documents the results of the Environmental Management Assessment performed at the Fernald Environmental Management Project (FEMP) in Fernald, Ohio. During this assessment, the activities conducted by the assessment team included review of internal documents and reports from previous audits and assessments; interviews with US Department of Energy (DOE) and FEMP contractor personnel; and inspection and observation of selected facilities and operations. The onsite portion of the assessment was conducted from March 15 through April 1, 1993, by DOE's Office of Environmental Audit (EH-24) located within the Office of the Assistant Secretary for Environment, Safety, and Health (EH-1). EH-24 carries out independent assessments of DOE facilities and activities as part of the EH-1 Environment, Safety, and Health (ES ampersand H) Oversight Audit Program. The EH-24 program is designed to evaluate the status of DOE facilities and activities with respect to compliance with Federal, state, and local environmental laws and regulations; compliance with DOE Orders, Guidance and Directives; conformance with accepted industry practices and standards of performance; and the status and adequacy of management systems developed to address environmental requirements. The Environmental Management Assessment of FEMP focused on the adequacy of environmental management systems. Further, in response to requests by the Office of Environmental Restoration and Waste Management (EM) and Fernald Field Office (FN), Quality Assurance and Environmental Radiation activities at FEMP were evaluated from a programmatic standpoint. The results of the evaluation of these areas are contained in the Environmental Protection Programs section in this report

  14. Reversing nuclear opposition: evolving public acceptance of a permanent nuclear waste disposal facility.

    Science.gov (United States)

    Jenkins-Smith, Hank C; Silva, Carol L; Nowlin, Matthew C; deLozier, Grant

    2011-04-01

    Nuclear facilities have long been seen as the top of the list of locally unwanted land uses (LULUs), with nuclear waste repositories generating the greatest opposition. Focusing on the case of the Waste Isolation Pilot Plant (WIPP) in southern New Mexico, we test competing hypotheses concerning the sources of opposition and support for siting the facility, including demographics, proximity, political ideology, and partisanship, and the unfolding policy process over time. This study tracks the changes of risk perception and acceptance of WIPP over a decade, using measures taken from 35 statewide surveys of New Mexico citizens spanning an 11-year period from fall 1990 to summer 2001. This time span includes periods before and after WIPP became operational. We find that acceptance of WIPP is greater among those whose residences are closest to the WIPP facility. Surprisingly, and contrary to expectations drawn from the broader literature, acceptance is also greater among those who live closest to the nuclear waste transportation route. We also find that ideology, partisanship, government approval, and broader environmental concerns influence support for WIPP acceptance. Finally, the sequence of procedural steps taken toward formal approval of WIPP by government agencies proved to be important to gaining public acceptance, the most significant being the opening of the WIPP facility itself. © 2010 Society for Risk Analysis.

  15. R+D programme 'Environmental engineering'. R+D projects 1994. Data of September 1, 1994

    International Nuclear Information System (INIS)

    1994-01-01

    Research programmes of the Federal Republic of Germany in the field of environmental engineering are presented. Research is done in the fields of low-emission production processes, environmentally acceptable materials and products, and environmental analysis and measuring instruments. (SR) [de

  16. Consumer Acceptability of Cucumber Pickles Produced by Fermentation in Calcium Chloride Brine for Reduced Environmental Impact.

    Science.gov (United States)

    Wilson, Emily M; Johanningsmeier, Suzanne D; Osborne, Jason A

    2015-06-01

    Fermentation of cucumbers in calcium chloride (CaCl2 ) brine has been proposed as an alternative process to reduce the environmental impact of traditional, high salt fermentations. The objective of this research was to determine whether consumer acceptability of pickle products would be impacted by fermentation and storage of cucumbers in CaCl2 brine. Cucumbers were fermented and stored with 0.1M CaCl2 or 1M sodium chloride (NaCl) in open-air, 3000 gal tanks at a commercial facility and processed into hamburger dill chips containing 0.38M NaCl. Cucumbers fermented in CaCl2 required additional desalting to reduce CaCl2 concentrations to that of current products. Consumers (n = 101) showed no significant preference for pickles from different fermentation treatments, whether stored for 2 mo (P = 0.75) or 8 mo (P = 0.68) prior to processing. In contrast, NaCl fermented pickles were preferred over CaCl2 fermented pickles stored for 10 mo and desalted only once (P consumer preference, and the 50% detection threshold of CaCl2 in dill pickle chips was found to be 61.8 ± 7.6 mM, indicating that processors could potentially use CaCl2 fermentations with a single desalting step. Consumer liking of flavor (n = 73) was not influenced by fermentation in CaCl2 or by 23 or 35 mM CaCl2 in finished products (P > 0.05), but variability in texture decreased consumer liking (P < 0.05). Although promising, individual fermentation variability and texture quality of CaCl2 fermented products should be further evaluated prior to broad implementation of this process. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.

  17. Attractivity and acceptance of electric-powered vehicles. Results of the project OPTUM - Optimisation of the potentials of environmental reliefs of electic-powered vehicles; Attraktivitaet und Akzeptanz von Elektroautos. Ergebnisse aus dem Projekt OPTUM - Optimierung der Umweltentlastungspotenziale von Elektrofahrzeugen

    Energy Technology Data Exchange (ETDEWEB)

    Goetz, Konrad; Sunderer, Georg; Birzle-Harder, Barbara; Deffner, Jutta

    2012-07-01

    In the research project OPTUM it was analysed to what extent environmental reliefs can be gained by electric cars. For this purpose an integrated approach was pursued, taking into account both considerations on the vehicle side and interactions with the energy sector. In detail the following key questions were analysed: acceptance and attractiveness of electric vehicles, market potentials for electric vehicles, interactions with the energy sector, CO2 reduction potentials for electric mobility, economic analysis of the storage media and resource efficiency of electric mobility. In this report the results concerning the question of acceptance and attractiveness of electric vehicles are presented. In doing so, results of two empirical investigations are described which were carried out in OPTUM to determine the acceptance and attractiveness of electric vehicles. The first one is a qualitative analysis by means of focus group discussions; the second one a standardised survey among buyers of new cars. The standardised survey contained a conjoint analysis, in which the participants had to choose between conventional cars, plug-in-hybrid vehicles and all-electrical cars. The empirical analyses show: There is an enormous potential of acceptance for electric cars (plug-in-hybrids and all-electric vehicles). Depending on scenario and vehicle class, especially for all-electrical cars, a potential of acceptance exists from 12 to 25 percent. Furthermore, both empirical investigations provide indications how the potential of acceptance can be realised or even extended.

  18. FUZZY ACCEPTANCE SAMPLING AND CHARACTERISTIC CURVES

    Directory of Open Access Journals (Sweden)

    Ebru Turano?lu

    2012-02-01

    Full Text Available Acceptance sampling is primarily used for the inspection of incoming or outgoing lots. Acceptance sampling refers to the application of specific sampling plans to a designated lot or sequence of lots. The parameters of acceptance sampling plans are sample sizes and acceptance numbers. In some cases, it may not be possible to define acceptance sampling parameters as crisp values. These parameters can be expressed by linguistic variables. The fuzzy set theory can be successfully used to cope with the vagueness in these linguistic expressions for acceptance sampling. In this paper, the main distributions of acceptance sampling plans are handled with fuzzy parameters and their acceptance probability functions are derived. Then the characteristic curves of acceptance sampling are examined under fuzziness. Illustrative examples are given.

  19. The process of accepting breast cancer among Chinese women: A grounded theory study.

    Science.gov (United States)

    Chen, Shuang-Qin; Liu, Jun-E; Li, Zhi; Su, Ya-Li

    2017-06-01

    To describe the process by which Chinese women accept living with breast cancer. Individual interviews were conducted with 18 Chinese women who completed breast cancer treatment. Data were collected from September 2014 to January 2015 at a large tertiary teaching hospital in Beijing, China. In this grounded theory study, data were analyzed using constant comparative and coding analysis methods. In order to explain the process of accepting having breast cancer among women in China through the grounded theory study, a model that includes 5 axial categories was developed. Cognitive reconstruction emerged as the core category. The extent to which the women with breast cancer accepted having the disease was found to increase with the treatment stage and as their treatment stage progressed with time. The accepting process included five stages: non-acceptance, passive acceptance, willingness to accept, behavioral acceptance, and transcendence of acceptance. Our study using grounded theory study develops a model describing the process by which women accept having breast cancer. The model provides some intervention opportunities at every point of the process. Copyright © 2017. Published by Elsevier Ltd.

  20. Status of DOE efforts to renew acceptance of foreign research reactor spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Head, C.R.

    1997-08-01

    This presentation summarizes the efforts being made by the Department of Energy to renew acceptance of spent nuclear fuel shipments from foreign research reactors. The author reviews the actions undertaken in this process in a fairly chronological manner, through the present time, as well as the development of an environmental impact statement to support the proposed actions.