Environmental efficiency analysis of transportation system in China: A non-radial DEA approach

International Nuclear Information System (INIS)

Chang, Young-Tae; Zhang, Ning; Danao, Denise; Zhang, Nan

2013-01-01

Many countries are worried about reducing energy consumption and environmental pollution while increasing the productivity and efficiency of their industries. This study intends to contribute to the literature by proposing a non-radial DEA model with the slacks-based measure (SBM) to analyze the environmental efficiency of China's transportation sector. The results show that most of the provinces in China do not have an eco-efficient transportation industry. The environmental efficiency levels in most of the provinces are lower than 50% of the ideal or target level. Therefore, China's transportation industry is environmentally very inefficient. China can reduce a great deal of carbon emissions in each province ranging from at least 1.6 million TOEs in Qinghai and at most 33 million TOEs in Guangdong and Shanghai. - Highlights: • Propose a non-radial DEA model with the slacks-based measure. • Analyze the environmental efficiency of China's transportation sector. • China's transportation industry is environmentally very inefficient. • Millions of TOE carbon emissions can be reduced in most of the provinces

Risk methodology for geologic disposal of radioactive waste: asymptotic properties of the environmental transport model

International Nuclear Information System (INIS)

Helton, J.C.; Brown, J.B.; Iman, R.L.

1981-02-01

The Environmental Transport Model is a compartmental model developed to represent the surface movement of radionuclides. The purpose of the present study is to investigate the asymptotic behavior of the model and to acquire insight with respect to such behavior and the variables which influence it. For four variations of a hypothetical river receiving a radionuclide discharge, the following properties are considered: predicted asymptotic values for environmental radionuclide concentrations and time required for environmental radionuclide concentrations to reach 90% of their predicted asymptotic values. Independent variables of two types are used to define each variation of the river: variables which define physical properties of the river system (e.g., soil depth, river discharge and sediment resuspension) and variables which summarize radionuclide properties (i.e., distribution coefficients). Sensitivity analysis techniques based on stepwise regression are used to determine the dominant variables influencing the behavior of the model. This work constitutes part of a project at Sandia National Laboratories funded by the Nuclear Regulatory Commission to develop a methodology to assess the risk associated with geologic disposal of radioactive waste

Review of global environmental-transport models for 3H, 14C, 85Kr, and 129I

International Nuclear Information System (INIS)

Kocher, D.C.; Killough, G.G.

1983-01-01

Global environmental transport models for the long-lived and mobile radionuclides 3 H, 14 C, 85 Kr, and 129 I are reviewed from the perspective of their application to collective dose assessments following releases, e.g., from the nuclear fuel cycle. Contributions to the collective dose commitment from first-pass local and regional exposures are compared. Current global models for 14 C and 85 Kr appear to be satisfactory for dose assessment purposes. Global modeling for 3 H is more difficult than for 14 C and 85 Kr, because of the different physico-chemical forms in which atmospheric releases occur. Global models for 129 I models indicate the primary importance of retention in surface soils for collective doses during the first 10 4 years following atmospheric releases and the importance of long-term transport to ocean sediments for reducing the dose commitment

Transportation Technical Environmental Information Center index

Energy Technology Data Exchange (ETDEWEB)

Davidson, C. A.; Foley, J. T.

1980-10-01

In an effort to determine the environmental intensities to which energy materials in transit may be exposed, a Data Center of technical environmental information has been established by Sandia National Laboratories, Division 5523, for the DOE Office of Transportation Fuel Storage. This document is an index which can be used to request data of interest. Access to the information held is not limited to Sandia personnel. The purpose of the Transportation Technical Environmental Information Center is to collect, analyze, store, and make available descriptions of the environment of transportation expressed in engineering terms. The data stored in the Center are expected to be useful in a variety of transportation related analyses. Formulations of environmental criteria for shipment of cargo, risk assessments, and detailed structural analyses of shipping containers are examples where these data have been applied. For purposes of indexing and data retrieval, the data are catalogued under two major headings: Normal and Abnormal Environments.

Transportation Technical Environmental Information Center index

International Nuclear Information System (INIS)

Davidson, C.A.; Foley, J.T.

1980-10-01

In an effort to determine the environmental intensities to which energy materials in transit may be exposed, a Data Center of technical environmental information has been established by Sandia National Laboratories, Division 5523, for the DOE Office of Transportation Fuel Storage. This document is an index which can be used to request data of interest. Access to the information held is not limited to Sandia personnel. The purpose of the Transportation Technical Environmental Information Center is to collect, analyze, store, and make available descriptions of the environment of transportation expressed in engineering terms. The data stored in the Center are expected to be useful in a variety of transportation related analyses. Formulations of environmental criteria for shipment of cargo, risk assessments, and detailed structural analyses of shipping containers are examples where these data have been applied. For purposes of indexing and data retrieval, the data are catalogued under two major headings: Normal and Abnormal Environments

Optimization of transport network in the Basin of Yangtze River with minimization of environmental emission and transport/investment costs

Directory of Open Access Journals (Sweden)

Haiping Shi

2016-08-01

Full Text Available The capacity of the ship-lock at the Three Gorges Dam has become bottleneck of waterway transport and caused serious congestion. In this article, a continual network design model is established to solve the problem with minimizing the transport cost and environmental emission as well as infrastructure construction cost. In this bi-level model, the upper model gives the schemes of ship-lock expansion or construction of pass-dam highway. The lower model assigns the containers in the multi-mode network and calculates the transport cost, environmental emission, and construction investment. The solution algorithm to the model is proposed. In the numerical study, scenario analyses are done to evaluate the schemes and determine the optimal one in the context of different traffic demands. The result shows that expanding the ship-lock is better than constructing pass-dam highway.

Environmental impact assessment of transportation projects: An analysis using an integrated GIS, remote sensing, and spatial modeling approach

Science.gov (United States)

El-Gafy, Mohamed Anwar

Transportation projects will have impact on the environment. The general environmental pollution and damage caused by roads is closely associated with the level of economic activity. Although Environmental Impact Assessments (EIAs) are dependent on geo-spatial information in order to make an assessment, there are no rules per se how to conduct an environmental assessment. Also, the particular objective of each assessment is dictated case-by-case, based on what information and analyses are required. The conventional way of Environmental Impact Assessment (EIA) study is a time consuming process because it has large number of dependent and independent variables which have to be taken into account, which also have different consequences. With the emergence of satellite remote sensing technology and Geographic Information Systems (GIS), this research presents a new framework for the analysis phase of the Environmental Impact Assessment (EIA) for transportation projects based on the integration between remote sensing technology, geographic information systems, and spatial modeling. By integrating the merits of the map overlay method and the matrix method, the framework analyzes comprehensively the environmental vulnerability around the road and its impact on the environment. This framework is expected to: (1) improve the quality of the decision making process, (2) be applied both to urban and inter-urban projects, regardless of transport mode, and (3) present the data and make the appropriate analysis to support the decision of the decision-makers and allow them to present these data to the public hearings in a simple manner. Case studies, transportation projects in the State of Florida, were analyzed to illustrate the use of the decision support framework and demonstrate its capabilities. This cohesive and integrated system will facilitate rational decisions through cost effective coordination of environmental information and data management that can be tailored to

Sensitivity analysis of a low-level waste environmental transport code

International Nuclear Information System (INIS)

Hiromoto, G.

1989-01-01

Results are presented from a sensivity analysis of a computer code designed to simulate the environmental transport of radionuclides buried at shallow land waste repositories. A sensitivity analysis methodology, based on the surface response replacement and statistic sensitivity estimators, was developed to address the relative importance of the input parameters on the model output. Response surface replacement for the model was constructed by stepwise regression, after sampling input vectors from range and distribution of the input variables, and running the code to generate the associated output data. Sensitivity estimators were compute using the partial rank correlation coefficients and the standardized rank regression coefficients. The results showed that the tecniques employed in this work provides a feasible means to perform a sensitivity analysis of a general not-linear environmental radionuclides transport models. (author) [pt

Sustainable logistics and transportation optimization models and algorithms

CERN Document Server

Gakis, Konstantinos; Pardalos, Panos

2017-01-01

Focused on the logistics and transportation operations within a supply chain, this book brings together the latest models, algorithms, and optimization possibilities. Logistics and transportation problems are examined within a sustainability perspective to offer a comprehensive assessment of environmental, social, ethical, and economic performance measures. Featured models, techniques, and algorithms may be used to construct policies on alternative transportation modes and technologies, green logistics, and incentives by the incorporation of environmental, economic, and social measures. Researchers, professionals, and graduate students in urban regional planning, logistics, transport systems, optimization, supply chain management, business administration, information science, mathematics, and industrial and systems engineering will find the real life and interdisciplinary issues presented in this book informative and useful.

Highway and interline transportation routing models

International Nuclear Information System (INIS)

Joy, D.S.; Johnson, P.E.

1994-01-01

The potential impacts associated with the transportation of hazardous materials are important issues to shippers, carriers, and the general public. Since transportation routes are a central characteristic in most of these issues, the prediction of likely routes is the first step toward the resolution of these issues. In addition, US Department of Transportation requirements (HM-164) mandate specific routes for shipments of highway controlled quantities of radioactive materials. In response to these needs, two routing models have been developed at Oak Ridge National Laboratory under the sponsorship of the U.S. Department of Energy (DOE). These models have been designated by DOE's Office of Environmental Restoration and Waste Management, Transportation Management Division (DOE/EM) as the official DOE routing models. Both models, HIGHWAY and INTERLINE, are described

A methodology for evaluating environmental impacts of railway freight transportation policies

International Nuclear Information System (INIS)

Lopez, Ignacio; Rodriguez, Javier; Buron, Jose Manuel; Garcia, Alberto

2009-01-01

Railway freight transportation presents a degree of complexity which frequently makes impossible to model it with sufficient precision. Currently, energetic and environmental impacts of freight transportation are usually modelled following average data, which do not reflect the characteristics of specific lines. These models allow qualitative approximations which may be used as criteria for designing high-level transportation policies: road-train modal shift, regional energetic planning or environmental policies. This paper proposes a methodology for estimating railway consumption associated to a specific railway line which yields a new degree of precision. It is based on estimating different contributions to railway consumption by a collection of factors, mobility, operation, or infrastructure-related. This procedure also allows applying the methodology for designing transportation policies in detail: evaluating impact of modal shift, consumption and pollutant emissions on a specific line, as well as the effect of building tunnels, reducing slopes, improving traffic control, etc. A comparison of the estimations given by the conventional approach and the proposed methodology is offered, as well as further comments on the results.

Environmental costs of transport; Liikenteen paeaestoekustannukset

Energy Technology Data Exchange (ETDEWEB)

Gynther, L.; Tervonen, J.; Hippinen, I.; Loven, K.; Salmi, J.; Soares, J.; Torkkeli, S.; Tikka, T.

2012-07-01

This study presents the estimated total environmental costs of airborne pollutants in road, rail and water transport in Finland and the unit costs of emissions used in socio-economic impact assessments of the transport system. The estimations are based on emission inventory for the year 2007 and the results are shown in prices of 2010. The study updates previous estimates dating back ten years. The total environmental cost of airborne pollutants in transport is estimated at 900 million euros. This is composed of 820 million euros attributable to fuel use and street dust, 54 million euros to the front end of fuel chains and 26 million euros to waste from water transport. The share of road transport in the total cost is 695 million euros, water transport 190 million euros and rail transport just under 15 million euros. The assessment covers the impacts of pollutants on health (increased mortality and morbidity) and flora (crop losses and decreased forest growth) as well as the cost of climate change. In addition to fuel emissions, also street dust is included in the analysis. In water transport the evaluation is extended to solid and liquid waste. In addition to fuel use, also other steps in the fuel chains, namely production, transport, refining and distribution, are covered by the study. The environmental unit costs of primary particles, sulphates and nitrates vary geographically and between different transport modes. The differences are particularly distinctive for particle emissions from road transport. The environmental unit costs of hydrocarbons and greenhouse gasses are the same for all transport modes in all traffic environments and all parts of the country. The impact assessment and monetary valuation of airborne pollutants was principally carried out by using the Impact Pathway Method. The method starts with an emissions inventory and estimation of the consequent pollutant concentrations followed by assessment of physical impacts, and finally monetary

A case study predicting environmental impacts of urban transport planning in China.

Science.gov (United States)

Chen, Chong; Shao, Li-guo; Xu, Ling; Shang, Jin-cheng

2009-10-01

Predicting environmental impacts is essential when performing an environmental assessment on urban transport planning. System dynamics (SD) is usually used to solve complex nonlinear problems. In this study, we utilized system dynamics (SD) to evaluate the environmental impacts associated with urban transport planning in Jilin City, China with respect to the local economy, society, transport, the environment and resources. To accomplish this, we generated simulation models comprising interrelated subsystems designed to utilize changes in the economy, society, road construction, changes in the number of vehicles, the capacity of the road network capacity, nitrogen oxides emission, traffic noise, land used for road construction and fuel consumption associated with traffic to estimate dynamic trends in the environmental impacts associated with Jilin's transport planning. Two simulation scenarios were then analyzed comparatively. The results of this study indicated that implementation of Jilin transport planning would improve the current urban traffic conditions and boost the local economy and development while benefiting the environment in Jilin City. In addition, comparative analysis of the two scenarios provided additional information that can be used to aid in scientific decision-making regarding which aspects of the transport planning to implement in Jilin City. This study demonstrates that our application of the SD method, which is referred to as the Strategic Environmental Assessment (SEA), is feasible for use in urban transport planning.

Environmental fate and transport of chemical signatures from buried landmines -- Screening model formulation and initial simulations

Energy Technology Data Exchange (ETDEWEB)

Phelan, J.M.; Webb, S.W.

1997-06-01

The fate and transport of chemical signature molecules that emanate from buried landmines is strongly influenced by physical chemical properties and by environmental conditions of the specific chemical compounds. Published data have been evaluated as the input parameters that are used in the simulation of the fate and transport processes. A one-dimensional model developed for screening agricultural pesticides was modified and used to simulate the appearance of a surface flux above a buried landmine, estimate the subsurface total concentration, and show the phase specific concentrations at the ground surface. The physical chemical properties of TNT cause a majority of the mass released to the soil system to be bound to the solid phase soil particles. The majority of the transport occurs in the liquid phase with diffusion and evaporation driven advection of soil water as the primary mechanisms for the flux to the ground surface. The simulations provided herein should only be used for initial conceptual designs of chemical pre-concentration subsystems or complete detection systems. The physical processes modeled required necessary simplifying assumptions to allow for analytical solutions. Emerging numerical simulation tools will soon be available that should provide more realistic estimates that can be used to predict the success of landmine chemical detection surveys based on knowledge of the chemical and soil properties, and environmental conditions where the mines are buried. Additional measurements of the chemical properties in soils are also needed before a fully predictive approach can be confidently applied.

Environmental Baseline File National Transportation

International Nuclear Information System (INIS)

Harris, M.

1999-01-01

This Environmental Baseline File summarizes and consolidates information related to the national-level transportation of commercial spent nuclear fuel. Topics addressed include: shipments of commercial spent nuclear fuel based on mostly truck and mostly rail shipping scenarios; transportation routing for commercial spent nuclear fuel sites and DOE sites; radionuclide inventories for various shipping container capacities; transportation routing; populations along transportation routes; urbanized area population densities; the impacts of historical, reasonably foreseeable, and general transportation; state-level food transfer factors; Federal Guidance Report No. 11 and 12 radionuclide dose conversion factors; and national average atmospheric conditions

The economic impact of environmentally sustainable transport in Germany

International Nuclear Information System (INIS)

Schade, B.; Rothengatter, W.

2004-01-01

The economic assessment of the Environmentally Sustainable Transportation (EST) scenarios developed throughout this paper are part of Phase 3 of the overall project, which is on social and economic assessment and on devising packages of instruments that - if implemented - would result in attaining EST. Two methods were chosen for the assessment of the scenarios: a qualitative evaluation based on a simplified cybernetic model (SCM) and a system dynamics model (SDM). In the assessment with the simplified cybernetic model, a conservative baseline has been chosen in order to start with a scenario that incorporates some pessimistic views of the industry. The aim is to show that, even in this case, an economic disaster will not occur. The System Dynamics Model ESCOT was designed to consider the ecological and technical aspects of a transition towards sustainable transportation. It is important that ESCOT considers not only first round effects but also secondary effects, which makes it a powerful instrument for the assessment of such large ecological changes. The economic assessment of environmentally sustainable scenarios shows that the departure from car and road freight oriented transport policy is far from leading to an economic collapse. The effects concerning economic indices are rather low, even though the measures proposed in the EST-80% scenario designate distinct changes compared to today's transport policy. The impacts on some economic indicators, however, are clearly negative. With an expansion of the time period for the transition in the EST-50% scenario we derived even more encouraging results than for EST-80%

Analysis of the Environmental Efficiency of the Chinese Transportation Sector Using an Undesirable Output Slacks-Based Measure Data Envelopment Analysis Model

Directory of Open Access Journals (Sweden)

Xiaowei Song

2015-07-01

Full Text Available Many countries are attempting to reduce energy consumption and CO2 emissions while increasing the productivity and efficiency of their industries. An undesirable-output-oriented data envelopment analysis (DEA model with slacks-based measure (SBM was used to evaluate the changes in the environmental efficiency of the transportation sector in 30 Chinese provinces (municipalities and autonomous regions between 2003 and 2012. The potential for decreasing CO2 emissions and energy saving was also assessed. Transportation was found to be inefficient in most of the provinces and the average environmental efficiency was low (0.45. The overall average efficiency reached a maximum in 2005 and continually decreased until a minimum was reached in 2009; since then, it has increased. In general, transportation is more efficient in eastern than in central or western China. A sensitivity analysis was also carried out on the input and output indicators. Based on these findings, some policies are proposed to improve the environmental efficiency of the transportation sector in China.

Life cycle assessment of railways and rail transports - Application in environmental product declarations (EPDs) for the Bothnia Line

Energy Technology Data Exchange (ETDEWEB)

Stripple, Haakan; Uppenberg, Stefan

2010-09-15

Environmental aspects are today highly important issues in the transport sector especially from a society perspective. Most likely, our society is facing considerable changes in the transport sector due to changes in the energy/environmental situation in the future. Strategic decisions concerning the development of the transport sector must be based on solid facts concerning both the transport infrastructure and the transport traffic on the infrastructure. The transport infrastructure is often complex and difficult to analyse but of great interest in a society perspective. In this project, we have performed a comprehensive view of a modern railway infrastructure system including the traffic on the infrastructure. A Life Cycle Assessment (LCA) methodology has been used for the study and several LCA models of the railway system have been designed. Due to the complexity of the models, several general railway component models have been developed. The component models can then be integrated to form a large model of an entire railway system. The component models (sub-models) are: 'Railway track foundation model', 'Railway track model', 'Railway electric power and control system model', 'Railway tunnel model', 'Railway bridge model', 'Railway passenger station and freight terminal model', 'Passenger and freight train model including train operation'. The LCA models have then been used to analyse the environmental performance of the Bothnia Line and to develop Environmental Product Declarations (EPDs) for the Bothnia Line

Innovative mathematical modeling in environmental remediation

Energy Technology Data Exchange (ETDEWEB)

Yeh, Gour T. [Taiwan Typhoon and Flood Research Institute (Taiwan); National Central Univ. (Taiwan); Univ. of Central Florida (United States); Gwo, Jin Ping [Nuclear Regulatory Commission (NRC), Rockville, MD (United States); Siegel, Malcolm D. [Sandia National Laboratories, Albuquerque, NM (United States); Li, Ming-Hsu [National Central Univ. (Taiwan); ; Fang, Yilin [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Zhang, Fan [Inst. of Tibetan Plateau Research, Chinese Academy of Sciences (China); Luo, Wensui [Inst. of Tibetan Plateau Research, Chinese Academy of Sciences (China); Yabusaki, Steven B. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States)

2013-05-01

There are two different ways to model reactive transport: ad hoc and innovative reaction-based approaches. The former, such as the Kd simplification of adsorption, has been widely employed by practitioners, while the latter has been mainly used in scientific communities for elucidating mechanisms of biogeochemical transport processes. It is believed that innovative mechanistic-based models could serve as protocols for environmental remediation as well. This paper reviews the development of a mechanistically coupled fluid flow, thermal transport, hydrologic transport, and reactive biogeochemical model and example-applications to environmental remediation problems. Theoretical bases are sufficiently described. Four example problems previously carried out are used to demonstrate how numerical experimentation can be used to evaluate the feasibility of different remediation approaches. The first one involved the application of a 56-species uranium tailing problem to the Melton Branch Subwatershed at Oak Ridge National Laboratory (ORNL) using the parallel version of the model. Simulations were made to demonstrate the potential mobilization of uranium and other chelating agents in the proposed waste disposal site. The second problem simulated laboratory-scale system to investigate the role of natural attenuation in potential off-site migration of uranium from uranium mill tailings after restoration. It showed inadequacy of using a single Kd even for a homogeneous medium. The third example simulated laboratory experiments involving extremely high concentrations of uranium, technetium, aluminum, nitrate, and toxic metals (e.g.,Ni, Cr, Co).The fourth example modeled microbially-mediated immobilization of uranium in an unconfined aquifer using acetate amendment in a field-scale experiment. The purposes of these modeling studies were to simulate various mechanisms of mobilization and immobilization of radioactive wastes and to illustrate how to apply reactive transport models

Innovative mathematical modeling in environmental remediation

International Nuclear Information System (INIS)

Yeh, Gour T.; Gwo, Jin Ping; Siegel, Malcolm D.; Li, Ming-Hsu; Fang, Yilin; Zhang, Fan; Luo, Wensui; Yabusaki, Steven B.

2013-01-01

There are two different ways to model reactive transport: ad hoc and innovative reaction-based approaches. The former, such as the Kd simplification of adsorption, has been widely employed by practitioners, while the latter has been mainly used in scientific communities for elucidating mechanisms of biogeochemical transport processes. It is believed that innovative mechanistic-based models could serve as protocols for environmental remediation as well. This paper reviews the development of a mechanistically coupled fluid flow, thermal transport, hydrologic transport, and reactive biogeochemical model and example-applications to environmental remediation problems. Theoretical bases are sufficiently described. Four example problems previously carried out are used to demonstrate how numerical experimentation can be used to evaluate the feasibility of different remediation approaches. The first one involved the application of a 56-species uranium tailing problem to the Melton Branch Subwatershed at Oak Ridge National Laboratory (ORNL) using the parallel version of the model. Simulations were made to demonstrate the potential mobilization of uranium and other chelating agents in the proposed waste disposal site. The second problem simulated laboratory-scale system to investigate the role of natural attenuation in potential off-site migration of uranium from uranium mill tailings after restoration. It showed inadequacy of using a single Kd even for a homogeneous medium. The third example simulated laboratory experiments involving extremely high concentrations of uranium, technetium, aluminum, nitrate, and toxic metals (e.g.,Ni, Cr, Co). The fourth example modeled microbially-mediated immobilization of uranium in an unconfined aquifer using acetate amendment in a field-scale experiment. The purposes of these modeling studies were to simulate various mechanisms of mobilization and immobilization of radioactive wastes and to illustrate how to apply reactive transport models

Environmentally sustainable transport in the CEI countries

International Nuclear Information System (INIS)

Thaler, R.; Wiederkehr, P.

2004-01-01

Moving people and freight in an environmentally sustainable manner that reduces environmental pollution and health hazards is a key challenge for transport and environment policies in Europe. Present mobility patterns of passenger and freight transport in Central and Eastern Europe do not correspond to the objectives of sustainable development. This paper presents the results of a transport futures study for the CEI region as a whole using backcasting methodology with long-term sustainability criteria to be met by 2030. Achieving environmentally sustainable transport (EST) doesn't mean less transport and mobility than we have today, but it means primarily maintaining a balanced modal split that results in less environmental and health impacts than it would be under projected future trends. Rail, trams, busses and new forms of flexible inter-modal public transport mobility would have to take a large share and rail transport for passenger and freight as well as inland shipping would have to be nearly doubled by 2030 while road freight could still increase if it is based on alternative fuels reducing its impacts. Technological advancements for passenger cars and lorries, fuels and infrastructure will play an important part to achieve EST, but also ''smart'' mobility management (e.g. transport avoidance, increasing load factors and modal shift), innovative mobility services and freight logistics would be critical. The implementation of these policies and strategies will require coherent and comprehensive packages of instruments and measures, including: economic instruments, regulatory instruments, changes in infrastructure investment, mobility management, information and education programmes as well as better integration of land use, transport and environment policies. Realising EST will provide new opportunities for businesses to develop and invest in innovative solutions for passenger and freight transport. Overall, achieving EST would constitute a net benefit for

Methodology for predictive modeling of environmental transport and health effects for waste sites at the Savannah River Plant: Environmental information document

International Nuclear Information System (INIS)

Stephensen, D.E.; King, C.M.; Looney, B.B.; Grant, M.W.

1987-03-01

This document provides information on the methods used to predict chemical transport and the associated health risk for various postulated closure activities at waste sites. The document was prepared as background documentation for the Department of Energy's proposed Environmental Impact Statement (EIS) on waste management activities for groundwater protection at the Savannah River Plant (SRP). The various mathematical formulations used in the environmental transport analysis, the exposure assessment, and the health risk assessment used in the analysis of all foreseeable scenarios as defined by the National Environmental Policy Act (CFR, 1986) are presented in this document. The scenarios do not necessarily represent actual environmental conditions for every SRP waste site. This document was prepared in support of the National Environmental Policy Act process, but does not by itself satisfy federal or state regulatory requirements. 29 refs., 11 figs

Environmental Assessment of Bus Transport in the Trondheim Region - Evaluation of Relevant Bus and Fuel Technologies and their Potential for Mitigating Emissions from Passenger Transportation

OpenAIRE

Buø, Tonje

2015-01-01

The overall aim of this thesis is to assess the carbon footprint of transport by bus in the Trondheim region. Bus transportation is promoted as a strategy both to combat local pollution problems in urban areas and to mitigate global greenhouse gas emissions from passenger transport. Still, the environmental impacts of bus transport have received fairly limited attention in research. The environmental impacts of bus transport are calculated through life cycle assessment. A model is develo...

Transportation risk assessment for the US Department of Energy Environmental Management Programmatic Environmental Impact Statement

International Nuclear Information System (INIS)

Chen, S.Y.; Monette, F.A.; Biwer, B.M.; Lazaro, M.A.; Hartmann, H.M.; Policastro, A.J.

1994-01-01

In its Programmatic Environmental Impact Statement (PEIS), the Office of Environmental Management (EM) of the US Department of Energy (DOE) is considering a broad range of alternatives for the future management of radioactive and hazardous waste at the facilities of the DOE complex. The alternatives involve facilities to be used for treatment, storage, and disposal of various wastes generated from DOE's environmental restoration activities and waste management operation. Included in the evaluation are six types of waste (five types of radioactive waste plus hazardous waste), 49 sites, and numerous cases associated with each different alternative for waste management. In general, the alternatives are evaluated independently for each type of waste and reflect decentralized, regionalized, and centralized approaches. Transportation of waste materials is an integral component of the EM PEIS alternatives for waste management. The estimated impact on human health that is associated with various waste transportation activities is an important element leading to a complete appraisal of the alternatives. The transportation risk assessment performed for the EM PEIS is designed to ensure -- through uniform and judicious selection of models, data, and assumptions -- that relative comparisons of risk among the various alternatives are meaningful and consistent

Inventory of environmental impact models related to energy technologies

Energy Technology Data Exchange (ETDEWEB)

Owen, P.T.; Dailey, N.S.; Johnson, C.A.; Martin, F.M. (eds.)

1979-02-01

The purpose of this inventory is to identify and collect data on computer simulations and computational models related to the environmental effects of energy source development, energy conversion, or energy utilization. Information for 33 data fields was sought for each model reported. All of the information which could be obtained within the time alloted for completion of the project is presented for each model listed. Efforts will be continued toward acquiring the needed information. Readers who are interested in these particular models are invited to contact ESIC for assistance in locating them. In addition to the standard bibliographic information, other data fields of interest to modelers, such as computer hardware and software requirements, algorithms, applications, and existing model validation information, are included. Indexes are provided for contact person, acronym, keyword, and title. The models are grouped into the following categories: atmospheric transport, air quality, aquatic transport, terrestrial food chains, soil transport, aquatic food chains, water quality, dosimetry, and human effects, animal effects, plant effects, and generalized environmental transport. Within these categories, the models are arranged alphabetically by last name of the contact person.

Inventory of environmental impact models related to energy technologies

International Nuclear Information System (INIS)

Owen, P.T.; Dailey, N.S.; Johnson, C.A.; Martin, F.M.

1979-02-01

The purpose of this inventory is to identify and collect data on computer simulations and computational models related to the environmental effects of energy source development, energy conversion, or energy utilization. Information for 33 data fields was sought for each model reported. All of the information which could be obtained within the time alloted for completion of the project is presented for each model listed. Efforts will be continued toward acquiring the needed information. Readers who are interested in these particular models are invited to contact ESIC for assistance in locating them. In addition to the standard bibliographic information, other data fields of interest to modelers, such as computer hardware and software requirements, algorithms, applications, and existing model validation information, are included. Indexes are provided for contact person, acronym, keyword, and title. The models are grouped into the following categories: atmospheric transport, air quality, aquatic transport, terrestrial food chains, soil transport, aquatic food chains, water quality, dosimetry, and human effects, animal effects, plant effects, and generalized environmental transport. Within these categories, the models are arranged alphabetically by last name of the contact person

The energy logistic model for analyses of transportation- and energy systems; Energilogistikmodell foer systemberaekningar av transport- och energifoersoerjningssystem

Energy Technology Data Exchange (ETDEWEB)

Blinge, M

1995-05-01

The Energy Logistic Model has been improved to become a tool for analysis of all production processes, transportation systems and systems including several energy users and several fuels. Two cases were studied. The first case deals with terminal equipment for inter modal transport systems and the second case deals with diesel fuelled trucks, cranes and machines in the Goeteborg area. In both cases, the environmental improvements of the city air quality are analyzed when natural gas is substituted for diesel oil. The comparison between inter modal transport and road haulage shows that the environmental impacts from the operations at the terminal are limited, and that the potential for environmental benefits when using inter modal transport is improving with the transportation distance. The choice of electricity production system is of great importance when calculating the environmental impact from railway traffic in the total analysis of the transportation system. 13 refs, 27 tabs

Transport phenomena in environmental engineering

Science.gov (United States)

Sander, Aleksandra; Kardum, Jasna Prlić; Matijašić, Gordana; Žižek, Krunoslav

2018-01-01

A term transport phenomena arises as a second paradigm at the end of 1950s with high awareness that there was a strong need to improve the scoping of chemical engineering science. At that point, engineers became highly aware that it is extremely important to take step forward from pure empirical description and the concept of unit operations only to understand the specific process using phenomenological equations that rely on three elementary physical processes: momentum, energy and mass transport. This conceptual evolution of chemical engineering was first presented with a well-known book of R. Byron Bird, Warren E. Stewart and Edwin N. Lightfoot, Transport Phenomena, published in 1960 [1]. What transport phenomena are included in environmental engineering? It is hard to divide those phenomena through different engineering disciplines. The core is the same but the focus changes. Intention of the authors here is to present the transport phenomena that are omnipresent in treatment of various process streams. The focus in this chapter is made on the transport phenomena that permanently occur in mechanical macroprocesses of sedimentation and filtration for separation in solid-liquid particulate systems and on the phenomena of the flow through a fixed and a fluidized bed of particles that are immanent in separation processes in packed columns and in environmental catalysis. The fundamental phenomena for each thermal and equilibrium separation process technology are presented as well. Understanding and mathematical description of underlying transport phenomena result in scoping the separation processes in a way that ChEs should act worldwide.

Environmentally sustainable transport in Germany

International Nuclear Information System (INIS)

Verron, H.; Friedrich, A.

2004-01-01

The study reported in this paper is part of an OECD project with several case studies in different countries. The purpose of the project was to look for possible ways to reduce the environmental impact of transport to a level which is compatible with sustainability. The participants in the case studies agreed upon quantifying criteria for carbon dioxide, nitrogen oxides and volatile organic compounds, which should describe environmentally sustainable transport (EST), and each case study constructed a business-as-usual scenario and three EST scenarios, considering the period from 1990 to 2030. Each EST scenario should meet the criteria in a backcasting effort, EST1 looking for solely technical solutions, EST2 restricting and shifting transport volumes while ignoring technological progress, and EST3 combining components of both strategies. In the German case study criteria were additionally quantified for particulate matter, noise and land-take for transport purposes. The German EST1 scenario is based on hybrid electric hypercars, hydrogen for public transport, freight and aviation, and electricity from renewable sources. In the EST2 scenario total transport activity for passenger and freight transport had to be reduced by 40% and 25% respectively, compared to 1990 in order to meet the criteria. In the EST3 scenario, while highly energy efficient conventional propulsion systems and engines were used, total passenger transport decreased only slightly and freight transport even increased. Implementation measures were then defined on the basis of the EST3 scenario. Emission regulation, fuel tax, and road pricing for heavy duty vehicles were the key features in order to achieve EST in this case study. They were complemented by additional sets of measures, designed to prevent urban sprawl, diminish freight traffic growth, increase liveability of towns, improve the infrastructure and service conditions of alternative modes as well as provide energy supply by regenerative

Sensitivity analysis of specific activity model parameters for environmental transport of 3H and dose assessment

International Nuclear Information System (INIS)

Rout, S.; Mishra, D.G.; Ravi, P.M.; Tripathi, R.M.

2016-01-01

Tritium is one of the radionuclides likely to get released to the environment from Pressurized Heavy Water Reactors. Environmental models are extensively used to quantify the complex environmental transport processes of radionuclides and also to assess the impact to the environment. Model parameters exerting the significant influence on model results are identified through a sensitivity analysis (SA). SA is the study of how the variation (uncertainty) in the output of a mathematical model can be apportioned, qualitatively or quantitatively, to different sources of variation in the input parameters. This study was designed to identify the sensitive model parameters of specific activity model (TRS 1616, IAEA) for environmental transfer of 3 H following release to air and then to vegetation and animal products. Model includes parameters such as air to soil transfer factor (CRs), Tissue Free Water 3 H to Organically Bound 3 H ratio (Rp), Relative humidity (RH), WCP (fractional water content) and WEQp (water equivalent factor) any change in these parameters leads to change in 3 H level in vegetation and animal products consequently change in dose due to ingestion. All these parameters are function of climate and/or plant which change with time, space and species. Estimation of these parameters at every time is a time consuming and also required sophisticated instrumentation. Therefore it is necessary to identify the sensitive parameters and freeze the values of least sensitive parameters at constant values for more accurate estimation of 3 H dose in short time for routine assessment

Modelling atmospheric transport of persistent organic pollutants in the Northern Hemisphere with a 3-D dynamical model: DEHM-POP

OpenAIRE

Hansen , K. M.; Christensen , J. H.; Brandt , J.; Frohn , L. M.; Geels , C.

2004-01-01

International audience; The Danish Eulerian Hemispheric Model (DEHM) is a 3-D dynamical atmospheric transport model originally developed to describe the atmospheric transport of sulphur into the Arctic. A new version of the model, DEHM-POP, developed to study the atmospheric transport and environmental fate of persistent organic pollutants (POPs) is presented. During environmental cycling, POPs can be deposited and re-emitted several times before reaching a final destination. A description of...

Environmental Baseline File for National Transportation

International Nuclear Information System (INIS)

1999-01-01

This Environmental Baseline File summarizes and consolidates information related to the national-level transportation of commercial spent nuclear fuel. Topics address include: shipments of commercial spent nuclear fuel based on mostly truck and mostly rail shipping scenarios; transportation routing for commercial spent nuclear fuel sites and DOE sites; radionuclide inventories for various shipping container capacities; transportation routing; populations along transportation routes; urbanized area population densities; the impacts of historical, reasonably foreseeable, and general transportation; state-level food transfer factors; Federal Guidance Report No. 11 and 12 radionuclide dose conversion factors; and national average atmospheric conditions

LASL models for environmental transport of radionuclides in forests

International Nuclear Information System (INIS)

Gallegos, A.F.; Smith, W.J.; Johnson, L.J.

1978-01-01

The Los Alamos Scientific Laboratory has been developing techniques for evaluating the adequacy of shallow land radioactive disposal sites to contain disposed radionuclides. This report discusses developments in applying a Biological Transport Model to simulate the cycling of plutonium in pinyon-juniper, and ponderosa pine forest ecosystems through serial stage developments using plant growth dynamics created in the model

Environmental economics of lignin derived transport fuels

OpenAIRE

Obydenkova, SV; Kouris, P Panagiotis; Hensen, EJM Emiel; Heeres, Hero J; Boot, MD Michael

2017-01-01

This paper explores the environmental and economic aspects of fast pyrolytic conversion of lignin, obtained from 2G ethanol plants, to transport fuels for both the marine and automotive markets. Various scenarios are explored, pertaining to aggregation of lignin from several sites, alternative energy carries to replace lignin, transport modalities, and allocation methodology. The results highlight two critical factors that ultimately determine the economic and/or environmental fuel viability....

Transport-related lifestyle and environmentally-friendly travel mode choices

DEFF Research Database (Denmark)

Thøgersen, John

2018-01-01

. Finally, a multivariate GLM analysis reveals that three behavioral tendencies of importance for transport-related environmental impacts vary significantly and substantially between lifestyle segments: vehicle ownership, everyday travel-mode choice and environmentally-friendly transport innovativeness...

Reducing environmental damages caused by transportation: towards an heterodox approach

International Nuclear Information System (INIS)

Marletto, Gerardo

2006-01-01

According to orthodox economics, monetary incentives are the best way to reduce environmental damages caused by transportation. This approach is consistent with the consideration of environmental damages as a market failure and with the use of pigouvian taxes to re-establish market equilibrium. Using heterodox economics both the theoretical and the policy approach will change radically. Indeed, market is just one of the structural components of the existing transport system; others being: institutions, technologies, values. Then, a shift in policy approaches is needed: from the orthodox efficient allocation of existing resources, to the heterodox promotion of new development patterns, needed to alter the given structural situation. Consistently with this paradigmatic shift, environmental damages caused by transportation can be reduced only by making the transition to a new transport system viable. Moreover, an heterodox approach to the reduction of environmental damages caused by transportation gives rise to a sound revision of policy tools; among these must be considered: selective industrial policies to foster the ecological reconversion of transport supply (instead of a non-discriminatory support to ecological innovations); participatory decision procedures to evaluate and select transport policies (instead of neutral technical tools - such as Cba or Eia); information campaigns based on ethical considerations (instead of economic incentives to transport demand); attribution of the status of commons to environmental resources, in order to protect them from the free riding of transport activities (instead of the attribution to them of private property rights). This essay is composed of four parts. In the first one, some data on environmental damages caused by transportation in Italy are shown. In the second one, orthodox and heterodox paradigms of public interventions in the economy are compared, with a specific attention to environmental applications. In the

An environmentally sustainable transport system in Sweden. A scenario study

Energy Technology Data Exchange (ETDEWEB)

Brokking, P.; Emmelin, L.; Engstroem, M-G.; Nilsson, Jan-Evert; Eriksson, Gunnar; Wikberg, O.

1997-02-01

This is a short version of a scenario study concerning the possibilities to reach an Environmentally Sustainable Transport system in Sweden in a perspective of 30 years. The aim of the scenario study has been to describe one of several possible paths from today`s transport system to an environmentally adopted one. However, this does not imply that the task is to predict how such a transformation can be accomplished. The aim is rather to illustrate what such transformation require in the form of political decisions. The transformation of the transport system in to an environmentally adopted one, is primarily treated as a political problem, and a political perspective has accordingly been chosen for the study. In this English version of the scenario, the carbon dioxide problem is used to illuminate the many conflicts in goals and other problem that will attend an environmental adoption of the Swedish transport system, and to highlight the analytical points of departure for the scenario study. The analysis shows that it is possible to reach the national environmental goals that characterise, with given definitions, an environmentally sustainable transport system. However, this implies many severe political decisions over a long period of time, which in turn, implies a long term national consensus about the importance to reach the overall goal. Other results the scenario points out, is the risk that a policy focused on one sector leads to `solving` a problem by moving it outside systems limitations, and the limitations on a national environmental policy: Being able to count on assistance from other countries through an environmental adoption of the transport system in the European Union or globally, would drastically facilitate the environmental adoption of the Swedish transport system, through, among other things, a more rapid technological development. This indicates the necessity of promoting issues involving transportation and the environment in international

Application of transport demand modeling in pollution estimation of a street network

Directory of Open Access Journals (Sweden)

Jović Jadranka J.

2009-01-01

Full Text Available The importance of transportation modeling, especially personal car flow modeling, is well recognized in transportation planning. Modern software tools give the possibility of generating many development scenarios of transport system, which can be tested quickly. Transportation models represent a good (and necessary basis in the procedure of environmental traffic impacts and energy emission estimation. Research in this paper deals with the possibility of using transportation modeling as a tool for estimation of some air pollution and global warming indicators on street network, produced by personal cars with internal combustion engines. These indicators could be the basis for defining planning and management solutions for transport system with respect to their environmental impacts. All the analyses are based on several years of research experience in Belgrade. According to the emissions of gases from the model, the values of other green house gases can be estimated using the known relations between the pollutants. There is a possibility that all these data can be used to calculate the transportation systems impact on temperature increase in urban areas.

Development and evaluation of the bacterial fate and transport module for the Agricultural Policy/Environmental eXtender (APEX) model.

Science.gov (United States)

Hong, Eun-Mi; Park, Yongeun; Muirhead, Richard; Jeong, Jaehak; Pachepsky, Yakov A

2018-02-15

The Agricultural Policy/Environmental eXtender (APEX) is a watershed-scale water quality model that includes detailed representation of agricultural management. The objective of this work was to develop a process-based model for simulating the fate and transport of manure-borne bacteria on land and in streams with the APEX model. The bacteria model utilizes manure erosion rates to estimate the amount of edge-of-field bacteria export. Bacteria survival in manure is simulated as a two-stage process separately for each manure application event. In-stream microbial fate and transport processes include bacteria release from streambeds due to sediment resuspension during high flow events, active release from the streambed sediment during low flow periods, bacteria settling with sediment, and survival. Default parameter values were selected from published databases and evaluated based on field observations. The APEX model with the newly developed microbial fate and transport module was applied to simulate fate and transport of the fecal indicator bacterium Escherichia coli in the Toenepi watershed, New Zealand that was monitored for seven years. The stream network of the watershed ran through grazing lands with daily bovine waste deposition. Results show that the APEX with the bacteria module reproduced well the monitored pattern of E. coli concentrations at the watershed outlet. The APEX with the microbial fate and transport module will be utilized for predicting microbial quality of water as affected by various agricultural practices, evaluating monitoring protocols, and supporting the selection of management practices based on regulations that rely on fecal indicator bacteria concentrations. Published by Elsevier B.V.

Comprehensive evaluation of environmental and economic benefits of China's urban underground transportation construction projects.

Science.gov (United States)

Yang, Xiaobin; Chen, Zhilong; Guo, Dongjun

2015-07-01

Urban underground transportation projects are introduced to address problems of scarce green land and traffic pollution. As construction of urban underground transportation is still in its infancy, there is no definite quantitative measurement on whether the construction is beneficial and what influences it will place on the region in China. This study intends to construct a comprehensive evaluation method for evaluating social, economic and environmental benefits of urban underground transportation projects and proposes the concept, role and principle for evaluation of environmental and economic benefits. It figures out relationship between the environment and factors of city development. It also summarizes three relevant factors, including transportation, biophysics and social economy, and works out indicators to evaluate the influence of urban underground transportation construction. Based on Contingent Valuation Method (CVM), Cost of Illness Approach (CIA), Human Capital Approach (HCA), this paper constructs 13 monetization calculation models for social, economic and environmental benefits in response to seven aspects, namely, reducing noise pollution and air pollution, using land efficiently, improving traffic safety, reducing traffic congestion, saving shipping time and minimizing transportation costs.

Assessment of transportation risk for the U.S. Department of Energy Environmental Management programmatic environmental impact statement

International Nuclear Information System (INIS)

Chen, S.Y.; Monette, F.A.; Biwer, B.M.; Lazaro, M.A.; Hartmann, H.M.; Policastro, A.J.

1995-01-01

In its Programmatic Environmental Impact Statement (PEIS), the Office of Environmental Management (EM) of the U.S. Department of Energy (DOE) is considering a broad range of alternatives for the future management of radioactive and hazardous waste at the facilities of the DOE complex. The alternatives involve facilities to be used for treatment, storage, and disposal of various wastes generated from DOE environmental restoration activities and waste management operations. The evaluation includes five types of waste (four types of radioactive waste plus hazardous waste), 49 sites, and numerous cases associated with each alternative for waste management. In general, the alternatives are evaluated independently for each type of waste and reflect decentralized, regionalized, and centralized approaches. Transportation of waste materials is an integral component of the EM PEIS alternatives for waste management. The estimated impact on human health that is associated with various waste transportation activities is an important component of a complete appraisal of the alternatives. The transportation risk assessment performed for the EM PEIS is designed to ensure through uniform and judicious selection of models, data, and assumptions that relative comparisons of risk among the various alternatives are meaningful and consistent. Among other tasks, Argonne National Laboratory is providing technical assistance to the EM PEIS on transportation risk assessment. The objective is to perform a human health risk assessment for each type of waste relative to the EM PEIS alternatives for waste management. The transportation risk assessed is part of the overall impacts being analyzed for the EM PEIS to determine the safest, most environmentally and economically sound manner in which to satisfy requirements for waste management in the coming decades

Passenger transport in Nigeria: Environmental and economic analysis with policy recommendations

International Nuclear Information System (INIS)

Gujba, H.; Mulugetta, Y.; Azapagic, A.

2013-01-01

This paper presents the life cycle environmental impacts and economic costs of the passenger transport sector in Nigeria for 2003–2030. Four scenarios are considered: business as usual (BAU); increased use of public transport (buses) at the expense of cars (LOWCAR) and motorcycles (LOWMC), respectively; and high economic growth with increased car ownership and decline of public transport (HICAR). The findings show that for the BAU scenario the life cycle environmental impacts double over the period, despite the assumption of increased fuel and vehicle efficiency of 35% over time. The total fuel costs at the sectoral level increase three times, from US$3.4 billion/yr in 2003 to US$9.7 billion in 2030. Increasing the use of buses would reduce the environmental impacts on average by 15–20% compared to BAU; at the same time, the total fuel costs would be 25–30% lower. If the use of cars grows much faster due to a high economic growth as in HICAR, the environmental impacts and fuel costs would increase by 16% and 26%, respectively. These results demonstrate clearly that future transport policy in Nigeria should promote and incentivise public (bus) transport as a much more environmentally and economically sustainable option than transport by cars and motorcycles. - Highlights: ► The life cycle environmental impacts of passenger transport in Nigeria estimated for 2003–2030. ► The tradeoffs between economic costs and environmental impacts discussed. ► Scenarios considered: business as usual; sustainable transport; high economic growth. ► Public transport is more sustainable than transport by cars and motorcycles. ► Ending gas flaring would improve substantially environmental, economic and social impacts

Environmental development plan for transportation programs: FY80 update

Energy Technology Data Exchange (ETDEWEB)

Saricks, C.L.; Singh, M.K.; Bernard, M.J. III; Bevilacqua, O.M.

1980-09-01

This is the second annual update of the environmental development plan (EDP) for transportation programs. It has been prepared as a cooperative effort of the Assistant Secretaries for Conservation and Solar Energy (ASCS) Office of Transportation Programs (CS/TP) and the Environment (ASEV) Office of Environmental Assessments. EDPs identify the ecosystem, resource, physical environment, health, safety, socioeconomic, and environmental control concerns associated with DOE programs. The programs include the research, development, demonstration, and assessment (RDD and A) of 14 transportation technologies and several strategy implementation projects. This EDP update presents a research and assessment plan for resolving any potentially adverse environmental concerns arising from these programs. The EDP process provides a framework for: incorporating environmental concerns into CS/TP planning and decision processes early to ensure they are assigned the same importance as technological, fiscal, and institutional concerns in decision making; resolving environmental concerns concurrently with energy technology and strategy development; and providing a research schedule that mitigates adverse environmental effects through sound technological design or policy analysis. This EDP also describes the status of each environmental concern and the plan for its resolution. Much of ongoing DOE reseirch and technology development is aimed at resolving concerns identified in this EDP. Each EDP is intended to be so comprehensive that no concerns escape notice. Care is taken to include any CS/TP action that may eventually require an Environmental Impact Statement. Because technology demonstration and commercialization tend to raise more environmental concerns than other portions of the transportation program, most of this EDP addresses these concerns.

Predicting soil, water and air concentrations of environmental contaminants locally and regionally; multimedia transport and transformation models

International Nuclear Information System (INIS)

McKone, T.E.; Daniels, J.I.

1991-01-01

Environmental scientists recognize that the environment functions as a complex, interconnected system. A realistic risk-management strategy for many contaminants requires a comprehensive and integrated assessment of local and regional transport and transformation processes. In response to this need, we have developed multimedia models that simulate the movement and transformation of chemicals as they spread through air, water, biota, soils, sediments, surface water and ground water. Each component of the environment is treated as a homogeneous subsystem that can exchange water, nutrients, and chemical contaminants with other adjacent compartments. In this paper, we illustrate the use of multimedia models and measurements as tools for screening the potential risks of contaminants released to air and deposited onto soil and plants. The contaminant list includes the volatile organic compounds (VOCs) tetrachloroethylene (PCE) and trichloroethylene (TCE), the semi-volatile organic compound benzo(a)pyrene, and the radionuclides tritium and uranium-238. We examine how chemical properties effect both the ultimate route and quantity of human and ecosystem contact and identify sensitivities and uncertainties in the model results. We consider the advantages of multimedia models relative to environmental monitoring data. (au)

Probabilistic risk assessment course documentation. Volume 7. Environmental transport and consequence analysis

International Nuclear Information System (INIS)

Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Ostmeyer, R.M.; Kaiser, G.D.; Runkle, G.E.; Woodard, K.

1985-08-01

Consequence models have been designed to assess health and economic risks from potential accidents at nuclear power plants. These models have been applied to an ever increasing variety of problems with ever increasing demands to improve modeling capabilities and provide greater realism. This course discusses the environmental transport of postulated radiological releases and the elements and purpose of accident consequence evaluation

Regional transport model of atmospheric sulfates

International Nuclear Information System (INIS)

Rao, K.S.; Thomson, I.; Egan, B.A.

1977-01-01

As part of the Sulfate Regional Experiment (SURE) Design Project, a regional transport model of atmospheric sulfates has been developed. This quasi-Lagrangian three-dimensional grid numerical model uses a detailed SO 2 emission inventory of major anthropogenic sources in the Eastern U.S. region, and observed meteorological data during an episode as inputs. The model accounts for advective transport and turbulent diffusion of the pollutants. The chemical transformation of SO 2 and SO 4 /sup =/ and the deposition of the species at the earth's surface are assumed to be linear processes at specified constant rates. The numerical model can predict the daily average concentrations of SO 2 and SO 4 /sup =/ at all receptor locations in the grid region during the episode. Because of the spatial resolution of the grid, this model is particularly suited to investigate the effect of tall stacks in reducing the ambient concentration levels of sulfur pollutants. This paper presents the formulations and assumptions of the regional sulfate transport model. The model inputs and results are discussed. Isopleths of predicted SO 2 and SO 4 /sup =/ concentrations are compared with the observed ground level values. The bulk of the information in this paper is directed to air pollution meteorologists and environmental engineers interested in the atmospheric transport modeling studies of sulfur oxide pollutants

Development and application of the microbial fate and transport module for the Agricultural Policy/Environmental eXtender (APEX) model

Science.gov (United States)

Hong, E.; Park, Y.; Muirhead, R.; Jeong, J.; Pachepsky, Y. A.

2017-12-01

Pathogenic microorganisms in recreational and irrigation waters remain the subject of concern. Water quality models are used to estimate microbial quality of water sources, to evaluate microbial contamination-related risks, to guide the microbial water quality monitoring, and to evaluate the effect of agricultural management on the microbial water quality. The Agricultural Policy/Environmental eXtender (APEX) is the watershed-scale water quality model that includes highly detailed representation of agricultural management. The APEX currently does not have microbial fate and transport simulation capabilities. The objective of this work was to develop the first APEX microbial fate and transport module that could use the APEX conceptual model of manure removal together with recently introduced conceptualizations of the in-stream microbial fate and transport. The module utilizes manure erosion rates found in the APEX. Bacteria survival in soil-manure mixing layer was simulated with the two-stage survival model. Individual survival patterns were simulated for each manure application date. Simulated in-stream microbial fate and transport processes included the reach-scale passive release of bacteria with resuspended bottom sediment during high flow events, the transport of bacteria from bottom sediment due to the hyporheic exchange during low flow periods, the deposition with settling sediment, and the two-stage survival. Default parameter values were available from recently published databases. The APEX model with the newly developed microbial fate and transport module was applied to simulate seven years of monitoring data for the Toenepi watershed in New Zealand. Based on calibration and testing results, the APEX with the microbe module reproduced well the monitored pattern of E. coli concentrations at the watershed outlet. The APEX with the microbial fate and transport module will be utilized for predicting microbial quality of water under various agricultural

The environmental assessment of nuclear materials disposition options: A transportation perspective

International Nuclear Information System (INIS)

Wilson, R.K.; Clauss, D.B.; Moyer, J.W.

1994-01-01

The US Department of Energy has undertaken a program to evaluate and select options for the long-term storage and disposition of fissile materials declared surplus to defense needs as a result of the end of the Cold War. The transport of surplus fissile material will be an important and highly visible aspect of the environmental impact studies and other planning documents required for implementation of the disposition options. This report defines the roles and requirements for transportation of fissile materials in the program, and discusses an existing methodology for determining the environmental impact in terms of risk. While it will be some time before specific alternatives are chosen that will permit the completion of detailed risk calculations, the analytical models for performing the probabilistic risk assessments already exist with much of the supporting data related to the transportation system. This report summarizes the various types of data required and identifies sources for that data

Environmental effects of transporting radioactive materials in nuclear waste management systems

International Nuclear Information System (INIS)

Pope, R.B.; Yoshimura, H.R.; McClure, J.D.; Huerta, M.

1978-01-01

This paper discusses the environmental effects of radioactive materials transportation. The systems used or being designed for use in spent fuel and waste transportation are described. Accident rate and severity data are used to quantify risk. A test program in which subscale and full scale transportation systems were exposed to accident environments far in excess of those used in package design is used to relate package damage to accident severity levels. Analytical results and subscale and full scale test results are correlated to demonstrate that computational methods or scale modeling, or both, can be used to predict accident behavior of transportation systems. This work is used to show that the risks to the public from radioactive material transportation are low relative to other risks commonly accepted by the public

Environmental Transport Division: 1979 report

Energy Technology Data Exchange (ETDEWEB)

Murphy, C.E. Jr.; Schubert, J.F.; Bowman, W.W.; Adams, S.E.

1980-03-01

During 1979, the Environmental Transport Division (ETD) of the Savannah River Laboratory conducted atmospheric, terrestrial, aquatic, and marine studies, which are described in a series of articles. Separate abstracts were prepared for each. Publications written about the 1979 research are listed at the end of the report.

Environmental Transport Division: 1979 report

International Nuclear Information System (INIS)

Murphy, C.E. Jr.; Schubert, J.F.; Bowman, W.W.; Adams, S.E.

1980-03-01

During 1979, the Environmental Transport Division (ETD) of the Savannah River Laboratory conducted atmospheric, terrestrial, aquatic, and marine studies, which are described in a series of articles. Separate abstracts were prepared for each. Publications written about the 1979 research are listed at the end of the report

Transportation Technical Environmental Information Center index

Energy Technology Data Exchange (ETDEWEB)

Davidson, C.A.; Foley, J.T.

1982-06-01

In an effort to determine the environmental intensities to which energy materials in transit may be exposed, a Data Center of technical environmental information has been established by Sandia National Laboratories, Division 5523, for the DOE Office of Transportation Fuel Storage. This document is an index which can be used to request data of interest. Access to the information held is not limited to Sandia personnel.

Transportation Technical Environmental Information Center index

International Nuclear Information System (INIS)

Davidson, C.A.; Foley, J.T.

1982-06-01

In an effort to determine the environmental intensities to which energy materials in transit may be exposed, a Data Center of technical environmental information has been established by Sandia National Laboratories, Division 5523, for the DOE Office of Transportation Fuel Storage. This document is an index which can be used to request data of interest. Access to the information held is not limited to Sandia personnel

Environmental friendly energy transport media

International Nuclear Information System (INIS)

Wan Nik, W.B.

2002-01-01

Rational self-interest and good environmental citizenship are forcing the development of renewable and environmentally, acceptable working fluids. Fluids that are at least equivalent in performance plus biodegradable have been formulated in Europe and USA rising vegetable oils as base stocks and as innovative additive packages. While much of the research has been made in the field of alternative environmentally, friendly energy, transport media, the thermal stability of vegetable based stock is still a challenging area. This work concentrates more in improving the oxidation stability of the vegetable based stocks. Oven and oil bath test methods were employed in this study. This paper tabled mineral and vegetable oil physical test results and presents thermal stability of oil blends. (Author)

Development and evaluation of the microbial fate and transport module for the Agricultural Policy/Environmental eXtender (APEX) model

Science.gov (United States)

Hong, Eun-Mi; Park, Yongeun; Muirhead, Richard; Pachepsky, Yakov

2017-04-01

Pathogenic microorganisms in recreational and irrigation waters remain the subject of concern. Water quality models are used to estimate microbial quality of water sources, to evaluate microbial contamination-related risks, to guide the microbial water quality monitoring, and to evaluate the effect of agricultural management on the microbial water quality. The Agricultural Policy/Environmental eXtender (APEX) is the watershed-scale water quality model that includes highly detailed representation of agricultural management. The APEX currently does not have microbial fate and transport simulation capabilities. The objective of this work was to develop the first APEX microbial fate and transport module that could use the APEX conceptual model of manure removal together with recently introduced conceptualizations of the in-stream microbial fate and transport. The module utilizes manure erosion rates found in the APEX. The total number of removed bacteria was set to the concentrations of bacteria in soil-manure mixing layer and eroded manure amount. Bacteria survival in soil-manure mixing layer was simulated with the two-stage survival model. Individual survival patterns were simulated for each manure application date. Simulated in-stream microbial fate and transport processes included the reach-scale passive release of bacteria with resuspended bottom sediment during high flow events, the transport of bacteria from bottom sediment due to the hyporheic exchange during low flow periods, the deposition with settling sediment, and the two-stage survival. Default parameter values were available from recently published databases. The APEX model with the newly developed microbial fate and transport module was applied to simulate seven years of monitoring data for the Toenepi watershed in New Zealand. The stream network of the watershed ran through grazing lands with the daily bovine waste deposition. Based on calibration and testing results, the APEX with the microbe module

Modelling freight transport

NARCIS (Netherlands)

Tavasszy, L.A.; Jong, G. de

2014-01-01

Freight Transport Modelling is a unique new reference book that provides insight into the state-of-the-art of freight modelling. Focusing on models used to support public transport policy analysis, Freight Transport Modelling systematically introduces the latest freight transport modelling

Modelling atmospheric transport of α-hexachlorocyclohexane in the Northern Hemispherewith a 3-D dynamical model: DEHM-POP

Directory of Open Access Journals (Sweden)

K. M. Hansen

2004-01-01

Full Text Available The Danish Eulerian Hemispheric Model (DEHM is a 3-D dynamical atmospheric transport model originally developed to describe the atmospheric transport of sulphur into the Arctic. A new version of the model, DEHM-POP, developed to study the atmospheric transport and environmental fate of persistent organic pollutants (POPs is presented. During environmental cycling, POPs can be deposited and re-emitted several times before reaching a final destination. A description of the exchange processes between the land/ocean surfaces and the atmosphere is included in the model to account for this multi-hop transport. The α-isomer of the pesticide hexachlorocyclohexane (α-HCH is used as tracer in the model development. The structure of the model and processes included are described in detail. The results from a model simulation showing the atmospheric transport for the years 1991 to 1998 are presented and evaluated against measurements. The annual averaged atmospheric concentration of α-HCH for the 1990s is well described by the model; however, the shorter-term average concentration for most of the stations is not well captured. This indicates that the present simple surface description needs to be refined to get a better description of the air-surface exchange processes of POPs.

Modelling atmospheric transport of α-hexachlorocyclohexane in the Northern Hemispherewith a 3-D dynamical model: DEHM-POP

Science.gov (United States)

Hansen, K. M.; Christensen, J. H.; Brandt, J.; Frohn, L. M.; Geels, C.

2004-07-01

The Danish Eulerian Hemispheric Model (DEHM) is a 3-D dynamical atmospheric transport model originally developed to describe the atmospheric transport of sulphur into the Arctic. A new version of the model, DEHM-POP, developed to study the atmospheric transport and environmental fate of persistent organic pollutants (POPs) is presented. During environmental cycling, POPs can be deposited and re-emitted several times before reaching a final destination. A description of the exchange processes between the land/ocean surfaces and the atmosphere is included in the model to account for this multi-hop transport. The α-isomer of the pesticide hexachlorocyclohexane (α-HCH) is used as tracer in the model development. The structure of the model and processes included are described in detail. The results from a model simulation showing the atmospheric transport for the years 1991 to 1998 are presented and evaluated against measurements. The annual averaged atmospheric concentration of α-HCH for the 1990s is well described by the model; however, the shorter-term average concentration for most of the stations is not well captured. This indicates that the present simple surface description needs to be refined to get a better description of the air-surface exchange processes of POPs.

Model for tritiated water transport in soil

International Nuclear Information System (INIS)

Galeriu, D.; Paunescu, N.

1999-01-01

Chemical forms of tritium released from nuclear facilities are mostly water (HTO) and hydrogen (HT, TT). Elemental tritium is inert in vegetation and superior animals, but the microorganisms from soil oxidize HT to HTO. After an atmospheric HT emission, in short time an equivalent quantity of HTO is re-emitted from soil. In the vicinity of a tritium source the spatial and temporary distribution of HTO is dependent on the chemical form of tritium releases. During routine tritium releases (continuously and constant releases), the local distribution of tritium reaches equilibrium, and specific activities of tritium in environmental compartments are almost equal. The situation is very different after an accidental emission. Having in view, harmful effects of tritium when it is incorporated into the body several models were developed for environmental tritium transport and dose assessment. The tritium transport into the soil is an important part of the environmental tritium behavior, but, unfortunately, in spite of the importance of this problem the corresponding modeling is unsatisfactory. The aim of this paper was the improvement of the TRICAIAP model, and the application of the model to BIOMOVS scenario. The BIOMOVS scenario predicts HTO concentrations in soil during 30 days, after one hour atmospheric HTO emission. The most important conclusions of the paper are: the principal carrier of tritium into the soil is water; the transfer processes are the reactions of water in soil and the diffusion due to concentration gradient; atmosphere-soil transport is dependent of surface characteristics (granulation, humidity, roughness, etc.); the conversion rate of HT to HTO is not well known and is dependent on active microorganism concentration in soil and on soil humidity. More experimental data are needed to decrease the uncertainty of transfer parameter, for the definition of the influence of vegetation, etc. (authors)

Impact of environmental justice analysis on transportation planning.

Science.gov (United States)

2011-12-30

This report presents the findings of a study sponsored by the Georgia Department of Transportation (GDOT): Impact of Environmental Justice (EJ) on Transportation Planning. The objectives of the study were to determine the state of the practice of EJ ...

Models and parameters for environmental radiological assessments

International Nuclear Information System (INIS)

Miller, C.W.

1983-01-01

This article reviews the forthcoming book Models and Parameters for Environmental Radiological Assessments, which presents a unified compilation of models and parameters for assessing the impact on man of radioactive discharges, both routine and accidental, into the environment. Models presented in this book include those developed for the prediction of atmospheric and hydrologic transport and deposition, for terrestrial and aquatic food-chain bioaccumulation, and for internal and external dosimetry. Summaries are presented for each of the transport and dosimetry areas previously for each of the transport and dosimetry areas previously mentioned, and details are available in the literature cited. A chapter of example problems illustrates many of the methodologies presented throughout the text. Models and parameters presented are based on the results of extensive literature reviews and evaluations performed primarily by the staff of the Health and Safety Research Division of Oak Ridge National Laboratory

Environmental Impact of ICT on the Transport Sector

DEFF Research Database (Denmark)

Falch, Morten

2012-01-01

This section analyses the environmental impact of ICT. This is done through an analysis on how two specific applications (tele-work and teleshopping) affect transport behavior. These two applications are considered to have a large potential with regard to savings in energy consumption.......This section analyses the environmental impact of ICT. This is done through an analysis on how two specific applications (tele-work and teleshopping) affect transport behavior. These two applications are considered to have a large potential with regard to savings in energy consumption....

Radiological environmental impacts from transportation of nuclear materials

International Nuclear Information System (INIS)

Shuai Zhengqing

1994-01-01

The author describes radiological impacts from transportation of nuclear materials. RADTRAN 4.0 supplied by IAEA was adopted to evaluate radiological consequence of incident-free transportation as well as the radiological risks from vehicular accidents occurring during transportation. The results of calculation show that the collective effective dose equivalent of incident-free transportation to the public and transportation workers is 7.94 x 10 -4 man·Sv. The calculated data suggest that the environmental impacts under normal and assumed accidental conditions are acceptable

Environmental impact from different modes of transport. Method of comparison

International Nuclear Information System (INIS)

2002-03-01

A prerequisite of long-term sustainable development is that activities of various kinds are adjusted to what humans and the natural world can tolerate. Transport is an activity that affects humans and the environment to a very great extent and in this project, several actors within the transport sector have together laid the foundation for the development of a comparative method to be able to compare the environmental impact at the different stages along the transport chain. The method analyses the effects of different transport concepts on the climate, noise levels, human health, acidification, land use and ozone depletion. Within the framework of the method, a calculation model has been created in Excel which acts as a basis for the comparisons. The user can choose to download the model from the Swedish EPA's on-line bookstore or order it on a floppy disk. Neither the method nor the model are as yet fully developed but our hope is that they can still be used in their present form as a basis and inspire further efforts and research in the field. In the report, we describe most of these shortcomings, the problems associated with the work and the existing development potential. This publication should be seen as the first stage in the development of a method of comparison between different modes of transport in non-monetary terms where there remains a considerable need for further development and amplification

Reducing the local environmental impacts of passenger transport

Energy Technology Data Exchange (ETDEWEB)

Maentynen, J.; Kalenoja, H.; Maekelae, S. [Tampere Univ. of Technology (Finland). Inst. of Transportation Engineering

1995-12-31

The local injurious effects of traffic appear mostly in densely populated areas, where the demand for transport is high. The local environmental effects of transportation can be reduced by measures of urban planning, traffic planning, vehicle technology and economical restrictions. Land use planning, concentration of urban structure and promoting distance working are examples of expedients of urban planning. The methods of urban planning usually affect very slowly on transport structure, but they also have a significant and continuous influence on travel demand. The methods of traffic planning generally tend to increase the fluency of traffic flow or reduce private car traffic with diverse restrictions by supporting environmentally more favourable vehicles or modes of travel. The improvements in vehicle technology can be significant in the short run. By economical regulations it is possible to guide the demand for traffic to a desirable direction. The local injurious effects of traffic vary by the size of urban areas. Local conditions, such as urban structure, population density, structure of employment, and composition of transport structure, influence on travel pattern and modal split. In Tampere University of Technology several measures to reduce environmental effects and energy consumption of transportation has been evaluated. This article presents three types of categories. As technological measures the introduction of electric vehicles and the alternative bus fuels have been studied. In addition, the effects of introducing midibuses, the car pool system and the increasing of vehicle occupancy have been evaluated as measures, which generally increase transportation system efficiency. (author)

Reducing the local environmental impacts of passenger transport

Energy Technology Data Exchange (ETDEWEB)

Maentynen, J; Kalenoja, H; Maekelae, S [Tampere Univ. of Technology (Finland). Inst. of Transportation Engineering

1996-12-31

The local injurious effects of traffic appear mostly in densely populated areas, where the demand for transport is high. The local environmental effects of transportation can be reduced by measures of urban planning, traffic planning, vehicle technology and economical restrictions. Land use planning, concentration of urban structure and promoting distance working are examples of expedients of urban planning. The methods of urban planning usually affect very slowly on transport structure, but they also have a significant and continuous influence on travel demand. The methods of traffic planning generally tend to increase the fluency of traffic flow or reduce private car traffic with diverse restrictions by supporting environmentally more favourable vehicles or modes of travel. The improvements in vehicle technology can be significant in the short run. By economical regulations it is possible to guide the demand for traffic to a desirable direction. The local injurious effects of traffic vary by the size of urban areas. Local conditions, such as urban structure, population density, structure of employment, and composition of transport structure, influence on travel pattern and modal split. In Tampere University of Technology several measures to reduce environmental effects and energy consumption of transportation has been evaluated. This article presents three types of categories. As technological measures the introduction of electric vehicles and the alternative bus fuels have been studied. In addition, the effects of introducing midibuses, the car pool system and the increasing of vehicle occupancy have been evaluated as measures, which generally increase transportation system efficiency. (author)

Uncertainty and sensitivity analysis of environmental transport models

International Nuclear Information System (INIS)

Margulies, T.S.; Lancaster, L.E.

1985-01-01

An uncertainty and sensitivity analysis has been made of the CRAC-2 (Calculations of Reactor Accident Consequences) atmospheric transport and deposition models. Robustness and uncertainty aspects of air and ground deposited material and the relative contribution of input and model parameters were systematically studied. The underlying data structures were investigated using a multiway layout of factors over specified ranges generated via a Latin hypercube sampling scheme. The variables selected in our analysis include: weather bin, dry deposition velocity, rain washout coefficient/rain intensity, duration of release, heat content, sigma-z (vertical) plume dispersion parameter, sigma-y (crosswind) plume dispersion parameter, and mixing height. To determine the contributors to the output variability (versus distance from the site) step-wise regression analyses were performed on transformations of the spatial concentration patterns simulated. 27 references, 2 figures, 3 tables

Collaborative Approaches in Developing Environmental and Safety Management Systems for Commercial Space Transportation

Science.gov (United States)

Zee, Stacey; Murray, D.

2009-01-01

The Federal Aviation Administration (FAA), Office of Commercial Space Transportation (AST) licenses and permits U.S. commercial space launch and reentry activities, and licenses the operation of non-federal launch and reentry sites. ASTs mission is to ensure the protection of the public, property, and the national security and foreign policy interests of the United States during commercial space transportation activities and to encourage, facilitate, and promote U.S. commercial space transportation. AST faces unique challenges of ensuring the protection of public health and safety while facilitating and promoting U.S. commercial space transportation. AST has developed an Environmental Management System (EMS) and a Safety Management System (SMS) to help meet its mission. Although the EMS and SMS were developed independently, the systems share similar elements. Both systems follow a Plan-Do-Act-Check model in identifying potential environmental aspects or public safety hazards, assessing significance in terms of severity and likelihood of occurrence, developing approaches to reduce risk, and verifying that the risk is reduced. This paper will describe the similarities between ASTs EMS and SMS elements and how AST is building a collaborative approach in environmental and safety management to reduce impacts to the environment and risks to the public.

Environmental economics of lignin derived transport fuels.

Science.gov (United States)

Obydenkova, Svetlana V; Kouris, Panos D; Hensen, Emiel J M; Heeres, Hero J; Boot, Michael D

2017-11-01

This paper explores the environmental and economic aspects of fast pyrolytic conversion of lignin, obtained from 2G ethanol plants, to transport fuels for both the marine and automotive markets. Various scenarios are explored, pertaining to aggregation of lignin from several sites, alternative energy carries to replace lignin, transport modalities, and allocation methodology. The results highlight two critical factors that ultimately determine the economic and/or environmental fuel viability. The first factor, the logistics scheme, exhibited the disadvantage of the centralized approach, owing to prohibitively expensive transportation costs of the low energy-dense lignin. Life cycle analysis (LCA) displayed the second critical factor related to alternative energy carrier selection. Natural gas (NG) chosen over additional biomass boosts well-to-wheel greenhouse gas emissions (WTW GHG) to a level incompatible with the reduction targets set by the U.S. renewable fuel standard (RFS). Adversely, the process' economics revealed higher profits vs. fossil energy carrier. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Integrating pro-environmental behavior with transportation network modeling: User and system level strategies, implementation, and evaluation

Science.gov (United States)

Aziz, H. M. Abdul

Personal transport is a leading contributor to fossil fuel consumption and greenhouse (GHG) emissions in the U.S. The U.S. Energy Information Administration (EIA) reports that light-duty vehicles (LDV) are responsible for 61% of all transportation related energy consumption in 2012, which is equivalent to 8.4 million barrels of oil (fossil fuel) per day. The carbon content in fossil fuels is the primary source of GHG emissions that links to the challenge associated with climate change. Evidently, it is high time to develop actionable and innovative strategies to reduce fuel consumption and GHG emissions from the road transportation networks. This dissertation integrates the broader goal of minimizing energy and emissions into the transportation planning process using novel systems modeling approaches. This research aims to find, investigate, and evaluate strategies that minimize carbon-based fuel consumption and emissions for a transportation network. We propose user and system level strategies that can influence travel decisions and can reinforce pro-environmental attitudes of road users. Further, we develop strategies that system operators can implement to optimize traffic operations with emissions minimization goal. To complete the framework we develop an integrated traffic-emissions (EPA-MOVES) simulation framework that can assess the effectiveness of the strategies with computational efficiency and reasonable accuracy. The dissertation begins with exploring the trade-off between emissions and travel time in context of daily travel decisions and its heterogeneous nature. Data are collected from a web-based survey and the trade-off values indicating the average additional travel minutes a person is willing to consider for reducing a lb. of GHG emissions are estimated from random parameter models. Results indicate that different trade-off values for male and female groups. Further, participants from high-income households are found to have higher trade-off values

Development of a database system for the calculation of indicators of environmental pressure caused by transport

Energy Technology Data Exchange (ETDEWEB)

Giannouli, Myrsini; Samaras, Zissis [Aristotle University of Thessaloniki, Laboratory of Applied Thermodynamics, Mechanical Engineering Department, GR 54124, Thessaloniki, P.O. Box 458 (Greece); Keller, Mario; De Haan, Peter [INFRAS, Muhlemattstrasse 45 CH-3007, Bern (Switzerland); Kallivoda, Manfred [psiA-Consult, Environmental Research and Engineering GmbH, Lastenstrasse 38/1, 1230 Wien (Austria); Sorenson, Spencer; Georgakaki, Aliki [DTU: Technical University of Denmark, Nils Koppels Alle, Building 403, DK 2800 Kgs. Lyngby (Denmark)

2006-03-15

The scope of this paper is to summarise a methodology developed for TRENDS (TRansport and ENvironment Database System-TRENDS). The main objective of TRENDS was the calculation of environmental pressure indicators caused by transport. The environmental pressures considered are associated with air emissions from the four main transport modes, i.e. road, rail, ships and air. In order to determine these indicators a system for calculating a range of environmental pressures due to transport was developed within a PC-based MS Access environment. Emphasis is given on the latest features incorporated in the model and their applications. One of the recently developed features of the software provides an option for simple scenario analysis including vehicle dynamics (such as turnover and evolution) for all EU15 member states. This feature is called the Transport Activity Balance module (TAB) and enables the production of collective results for all transport modes as well as a comparative assessment of air emissions produced by the various modes. Traffic activity and emission data obtained according to a basic (reference) scenario are displayed for the time period 1970-2020. In addition, a detailed assessment of the results produced by TRENDS was conducted by means of comparison with data found in the literature. Finally, vehicle emissions produced by the model for the EU15 member states were spatially disaggregated for the base year, 1995 and GIS maps were generated. Examples of these maps are displayed in this document, for the various modes of transport considered in the study. (author)

Limitations of sorption isotherms on modeling groundwater contaminant transport

International Nuclear Information System (INIS)

Silva, Eduardo Figueira da

2007-01-01

Design and safety assessment of radioactive waste repositories, as well as remediation of radionuclide contaminated groundwater require the development of models capable of accurately predicting trace element fate and transport. Adsorption of trace radionuclides onto soils and groundwater is an important mechanism controlling near- and far- field transport. Although surface complexation models (SCMs) can better describe the adsorption mechanisms of most radionuclides onto mineral surfaces by directly accounting for variability of system properties and mineral surface properties, isotherms are still used to model contaminant transport in groundwater, despite the much higher system dependence. The present work investigates differences between transport model results based on these two approaches for adsorption modeling. A finite element transport model is used for the isotherm model, whereas the computer program PHREEQC is used for the SCM approach. Both models are calibrated for a batch experiment, and one-dimensional transport is simulated using the calibrated parameters. At the lower injected concentrations there are large discrepancies between SCM and isotherm transport predictions, with the SCM presenting much longer tails on the breakthrough curves. Isotherms may also provide non-conservative results for time to breakthrough and for maximum concentration in a contamination plume. Isotherm models are shown not to be robust enough to predict transport behavior of some trace elements, thus discouraging their use. The results also illustrate the promise of the SCM modeling approach in safety assessment and environmental remediation applications, also suggesting that independent batch sorption measurements can be used, within the framework of the SCM, to produce a more versatile and realistic groundwater transport model for radionuclides which is capable of accounting more accurately for temporal and spatial variations in geochemical conditions. (author)

Evaluation of uncertainties in selected environmental dispersion models

International Nuclear Information System (INIS)

Little, C.A.; Miller, C.W.

1979-01-01

Compliance with standards of radiation dose to the general public has necessitated the use of dispersion models to predict radionuclide concentrations in the environment due to releases from nuclear facilities. Because these models are only approximations of reality and because of inherent variations in the input parameters used in these models, their predictions are subject to uncertainty. Quantification of this uncertainty is necessary to assess the adequacy of these models for use in determining compliance with protection standards. This paper characterizes the capabilities of several dispersion models to predict accurately pollutant concentrations in environmental media. Three types of models are discussed: aquatic or surface water transport models, atmospheric transport models, and terrestrial and aquatic food chain models. Using data published primarily by model users, model predictions are compared to observations

Importance and variability in processes relevant to environmental tritium ingestion dose models

International Nuclear Information System (INIS)

Raskob, W.; Barry, P.

1997-01-01

The Aiken List was devised in 1990 to help decide which transport processes should be investigated experimentally so as to derive the greatest improvement in performance of environmental tritium assessment models. Each process was rated high, medium and low on each of two criteria. These were ''Importance'', which rated processes by how much each contributed to ingestion doses, and ''State of Modelling'', which rated the adequacy of the knowledge base on which models were built. Ratings, though unanimous, were, nevertheless, qualitative and subjective opinions. This paper describes how we have tried to quantify the ratings. To do this, we use, as measures of ''Importance'', sensitivities of predicted ingestion doses to changes in values of parameters in mathematical descriptions of individual processes. Measures of ''ModellinStatus'' were taken from a recently completed BIOMOVS study of HTO transport model performance and based either on by how much predicted transport by individual processes differed amongst participating modellers or by the variety of different ways that modellers chose to describe individual processes. The tritium transport model UFOTRI was used, and because environmental transport of HTO varies according to the weather at and after release time, sensitivities were measured in a sample of all conditions likely to arise in central Europe. (Author)

Modelling atmospheric transport of persistent organic pollutants in the Northern Hemisphere with a 3-D dynamical model: DEHM-POP

Science.gov (United States)

Hansen, K. M.; Christensen, J. H.; Brandt, J.; Frohn, L. M.; Geels, C.

2004-03-01

The Danish Eulerian Hemispheric Model (DEHM) is a 3-D dynamical atmospheric transport model originally developed to describe the atmospheric transport of sulphur into the Arctic. A new version of the model, DEHM-POP, developed to study the atmospheric transport and environmental fate of persistent organic pollutants (POPs) is presented. During environmental cycling, POPs can be deposited and re-emitted several times before reaching a final destination. A description of the exchange processes between the land/ocean surfaces and the atmosphere is included in the model to account for this multi-hop transport. The α-isomer of the pesticide hexachlorocyclohexane (α-HCH) is used as tracer in the model development. The structure of the model and processes included are described in detail. The results from a model simulation showing the atmospheric transport for the years 1991 to 1998 are presented and evaluated against measurements. The annual averaged atmospheric concentration of α-HCH for the 1990s is well described by the model; however, the shorter-term average concentration for most of the stations is not well captured. This indicates that the present simple surface description needs to be refined to get a better description of the air-surface exchange proceses of POPs.

Overview of the environmental concerns of coal transportation

Energy Technology Data Exchange (ETDEWEB)

Bertram, K.; Dauzvardis, P.; Fradkin, L.; Surles, T.

1980-02-01

More than 30 environmental concerns were analyzed for the transportation of coal by rail, roads (trucks), high voltage transmission lines (that is, from mine-mouth generating plants to distribution networks), coal slurry pipelines, and barges. The following criteria were used to identify these problems: (1) real physical environmetal impacts for which control technologies must be developed, or regulation made effective where control technologies presently exist; (2) the level of impact is uncertain, although the potential impact may be moderate to high; (3) the concerns identified by the first two criteria are specific to or exacerbated by coal transportation. Generic transportation problems are not included. The significant environmental problems identified as a result of this study are: (1) rail transport - community traffic disruption and human health, safety, and habitat destruction; (2) coal haul roads - road degradation, traffic congestion and safety, air quality, and noise; (3) high voltage transmission lines - changed land use without local benefits, biological health and safety effects, and disruption of world weather patterns; (4) slurry pipelines - water availability, water quality, and possible spills from non-water slurry pipelines; and (5) barge transport - impacts common to all barge traffic. (DMC)

Environmental Aspects of Transport in the Context of Development of Inland Navigation

Directory of Open Access Journals (Sweden)

Galieriková Andrea

2016-09-01

Full Text Available Transport has an immense impact on the environment. The largest share of environmental pollution is caused by road transport. The atmosphere is threatened by fuel combustion of engines of road vehicles, thereby leading to the global warming of Earth. In addition to having an adverse impact on the environment, such as greenhouse gas emissions and carbon dioxide emissions, road transport also leads to external effects such as noise pollution, vibration, congestion and traffic accidents. The volume of transport in the world, notably on the roads, is increasing day by day. We should take the necessary steps to move to more environmentally-friendly modes of transportation, such as rail and inland navigation. Rail transportation is currently the largest competitor of road transport. If the waterways infrastructure is improved, there would be a decrease in the traffic flow of motorways and thus, we can move to a more environmentally-friendly transportation.

Transportation of radionuclides in urban environs: draft environmental assessment

Energy Technology Data Exchange (ETDEWEB)

Finley, N.C.; Aldrich, D.C.; Daniel, S.L.; Ericson, D.M.; Henning-Sachs, C.; Kaestner, P.C.; Ortiz, N.R.; Sheldon, D.D.; Taylor, J.M.

1980-07-01

This report assesses the environmental consequences of the transportation of radioactive materials in densely populated urban areas, including estimates of the radiological, nonradiological, and social impacts arising from this process. The chapters of the report and the appendices which follow detail the methodology and results for each of four causative event categories: incident free transport, vehicular accidents, human errors or deviations from accepted quality assurance practices, and sabotage or malevolent acts. The numerical results are expressed in terms of the expected radiological and economic impacts from each. Following these discussions, alternatives to the current transport practice are considered. Then, the detailed analysis is extended from a limited area of New York city to other urban areas. The appendices contain the data bases and specific models used to evaluate these impacts, as well as discussions of chemical toxicity and the social impacts of radioactive material transport in urban areas. The latter are evaluated for each causative event category in terms of psychological, sociological, political, legal, and organizational impacts. The report is followed by an extensive bibliography covering the many fields of study which were required in performing the analysis.

AN INTEGRATED MODELING FRAMEWORK FOR ENVIRONMENTALLY EFFICIENT CAR OWNERSHIP AND TRIP BALANCE

Directory of Open Access Journals (Sweden)

Tao FENG

2008-01-01

Full Text Available Urban transport emissions generated by automobile trips are greatly responsible for atmospheric pollution in both developed and developing countries. To match the long-term target of sustainable development, it seems to be important to specify the feasible level of car ownership and travel demand from environmental considerations. This research intends to propose an integrated modeling framework for optimal construction of a comprehensive transportation system by taking into consideration environmental constraints. The modeling system is actually a combination of multiple essential models and illustrated by using a bi-level programming approach. In the upper level, the maximization of both total car ownership and total number of trips by private and public travel modes is set as the objective function and as the constraints, the total emission levels at all the zones are set to not exceed the relating environmental capacities. Maximizing the total trips by private and public travel modes allows policy makers to take into account trip balance to meet both the mobility levels required by travelers and the environmentally friendly transportation system goals. The lower level problem is a combined trip distribution and assignment model incorporating traveler's route choice behavior. A logit-type aggregate modal split model is established to connect the two level problems. In terms of the solution method for the integrated model, a genetic algorithm is applied. A case study is conducted using road network data and person-trip (PT data collected in Dalian city, China. The analysis results showed that the amount of environmentally efficient car ownership and number of trips by different travel modes could be obtained simultaneously when considering the zonal control of environmental capacity within the framework of the proposed integrated model. The observed car ownership in zones could be increased or decreased towards the macroscopic optimization

Atmospheric transport of persistent organic pollutants - development of a 3-d dynamical transport model covering the northern hemisphere

Science.gov (United States)

Hansen, K. M.; Christensen, J. H.; Geels, C.; Frohn, L. M.; Brandt, J.

2003-04-01

The Danish Eulerian Hemispheric Model (DEHM) is a 3-D dynamical atmospheric transport model originally developed to describe the atmospheric transport of sulphur, lead, and mercury to the Arctic. The model has been validated carefully for these compounds. A new version of DEHM is currently being developed to describe the atmospheric transport of persistent organic pollutants (POPs) which are toxic, lipophilic and bio-accumulating compounds showing great persistence in the environment. The model has a horizontal resolution of 150 km x 150 km and 18 vertical layers, and it is driven by meteorological data from the numerical weather prediction model MM5V2. During environmental cycling POPs can be deposited and re-emitted several times before reaching a final destination. A description of the exchange processes between the land/ocean surfaces and the atmosphere is included in the model to account for this multi-hop transport. The present model version describes the atmospheric transport of the pesticide alpha-hexachlorocyclohexane (alpha-HCH). Other POPs may be included when proper data on emissions and physical-chemical parameters becomes available. The model-processes and the first model results are presented. The atmospheric transport of alpha-HCH for the 1990s is well described by the model.

Numerical investigation of pollution transport and environmental improvement measures in a tidal bay based on a Lagrangian particle-tracking model

Directory of Open Access Journals (Sweden)

En-jin Zhao

2018-01-01

Full Text Available In view of the severity of oceanic pollution, based on the finite volume coastal ocean model (FVCOM, a Lagrangian particle-tracking model was used to numerically investigate the coastal pollution transport and water exchange capability in Tangdao Bay, in China. The severe pollution in the bay was numerically simulated by releasing and tracking particles inside it. The simulation results demonstrate that the water exchange capability in the bay is very low. Once the bay has suffered pollution, a long period will be required before the environment can purify itself. In order to eliminate or at least reduce the pollution level, environmental improvement measures have been proposed to enhance the seawater exchange capability and speed up the water purification inside the bay. The study findings presented in this paper are believed to be instructive and useful for future environmental policy makers and it is also anticipated that the numerical model in this paper can serve as an effective technological tool to study many emerging coastal environment problems. Keywords: Particle-tracking, Water exchange capability, Lagrangian system, Coastal pollution, Tangdao bay, FVCOM

Environmental impacts of the transportation of radioactive materials in urban areas

International Nuclear Information System (INIS)

Finley, N.C.; Taylor, J.M.; Daniel, S.L.; Ericson, D.M. Jr.

1980-01-01

Radioactive material transport in urban areas is investigated and the specific urban features which influence environmental impacts are addressed. These features include the geographic and demographic make-up, and vehicular population and transportation patterns in the area. Previous efforts have not identified a most important population exposure pathway or group. This assessment examines several pathways and a number of urban specific population groups to evaluate their relative significance. In addition, because different causative events contribute to the overall environmental impacts, this assessment addresses four of these: incident free transport, vehicular accidents, human errors, and sabotage or malevolent acts. Not only does radioactive material transport produce radiological and economic consequences but also it can have social impacts. The objective of this study is to examine both the quantitative environmental impacts of radioactive material transport in urban areas and the more subjective social effects of this process. The social impacts assessment was performed by Battelle Human Affairs Research Centers, Seattle, Washington and their conclusions are only summarized here

A closer look at urban transport. TERM 2013: transport indicators tracking progress towards environmental targets in Europe

Energy Technology Data Exchange (ETDEWEB)

Sanchez Vicente, A.

2013-12-01

The EEA works in the transport area to assess the impacts of the sector on the human health and the environment. This work also allows the EEA to monitor the progress of integrating transport and environmental policies, and informing the EU, EEA member countries and the public about such progress. This is achieved by the production of relevant indicators that track progress towards policy targets for transport related to the environment, as well as through the elaboration of periodic assessments that cover all transport modes and the impacts of transport on the environment. The annual TERM report aims to enable policymakers to gauge the progress of those policies aiming to improve the environmental performance of the transport system as a whole. TERM 2013, has two distinct parts. Part A provides an annual assessment of the EU's transport and environment policies based on the TERM-CSI, a selection of 12 indicators from the broader set of EEA transport indicators to enabling monitoring of the most important aspects of transport. Part B focuses on urban transport and its effects on the environment. (LN)

A Hybrid Fuzzy Inference System Based on Dispersion Model for Quantitative Environmental Health Impact Assessment of Urban Transportation Planning

Directory of Open Access Journals (Sweden)

Behnam Tashayo

2017-01-01

Full Text Available Characterizing the spatial variation of traffic-related air pollution has been and is a long-standing challenge in quantitative environmental health impact assessment of urban transportation planning. Advanced approaches are required for modeling complex relationships among traffic, air pollution, and adverse health outcomes by considering uncertainties in the available data. A new hybrid fuzzy model is developed and implemented through hierarchical fuzzy inference system (HFIS. This model is integrated with a dispersion model in order to model the effect of transportation system on the PM2.5 concentration. An improved health metric is developed as well based on a HFIS to model the impact of traffic-related PM2.5 on health. Two solutions are applied to improve the performance of both the models: the topologies of HFISs are selected according to the problem and used variables, membership functions, and rule set are determined through learning in a simultaneous manner. The capabilities of this proposed approach is examined by assessing the impacts of three traffic scenarios involved in air pollution in the city of Isfahan, Iran, and the model accuracy compared to the results of available models from literature. The advantages here are modeling the spatial variation of PM2.5 with high resolution, appropriate processing requirements, and considering the interaction between emissions and meteorological processes. These models are capable of using the available qualitative and uncertain data. These models are of appropriate accuracy, and can provide better understanding of the phenomena in addition to assess the impact of each parameter for the planners.

Some issues on environmental impact report of radioactive material transport

International Nuclear Information System (INIS)

Wang Jiaming

2001-01-01

The author puts forward some issues which should be paid attention to when compiling a environmental impact report of radioactive material transport. The main issues discussed are as follows: (1) Optimization analysis for transport routes. (2) Source terms under accident conditions in transport. (3) Precautions against accidents and emergency preparedness. (4) Quality assurance of transport, etc

Environmental analyses of land transportation systems in The Netherlands

NARCIS (Netherlands)

Bouwman, Mirjan E.; Moll, Henri C.

Environmental analyses of the impact of transportation systems on the environment from the cradle to the grave are rare. This article makes a comparison of various Dutch passenger transportation systems by studying their complete life-cycle energy use. Moreover, systems are compared according to

10 CFR 51.52 - Environmental effects of transportation of fuel and waste-Table S-4.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Environmental effects of transportation of fuel and waste... Environmental effects of transportation of fuel and waste—Table S-4. Under § 51.50, every environmental report... detailed analysis of the environmental effects of transportation of fuel and wastes to and from the reactor...

Probabilistic risk assessment and nuclear waste transportation: A case study of the use of RADTRAN in the 1986 Environmental Assessment for Yucca Mountain

International Nuclear Information System (INIS)

Resnikoff, M.

1990-12-01

The analysis of the risks of transporting irradiated nuclear fuel to a federal repository, Appendix A of the DOE Environmental Assessment for Yucca Mountain (DOE84), is based on the RADTRAN model and input parameters. The RADTRAN computer code calculates the radiation exposures and health effects under normal or incident-free transport, and over all credible accident conditions. The RADTRAN model also calculates the economic consequences of transportation accidents, though these costs were not included in the Department's Environmental Assessment for the proposed Yucca Mountain repository

Laying the foundations for greener transport - TERM 2011: transport indicators tracking progress towards environmental targets in Europe

Energy Technology Data Exchange (ETDEWEB)

Sanchez Vicente, A

2011-11-15

For the first time ever the European Commissions is proposing a greenhouse gas emissions target for transport. But how is transport going to provide the services that our society needs while minimising its environmental impacts? This is the theme for the Transport White Paper launched in 2011. TERM 2011 and future reports aim to deliver an annual assessment on progress towards these targets by introducing the Transport and Environment Reporting Mechanism Core Set of Indicators (TERM-CSI). TERM 2011 provides also the baseline to which progress will be checked against, covering most of the environmental areas, including energy consumption, emissions, noise and transport demand. In addition, this report shows latest data and discuss on the different aspects that can contribute the most to minimise transport impacts. TERM 2011 applies the avoid-shift-improve (ASI) approach, introduced in the previous TERM report, analysing ways to optimise transport demand, obtain a more sustainable modal split or use the best technology available. (Author)

Environmental assessment of heavy metal transport and transformation in the Hangzhou Bay, China

Energy Technology Data Exchange (ETDEWEB)

Fang, Hongwei; Huang, Lei; Wang, Jingyu; He, Guojian [The State Key Laboratory of Hydro Science and Engineering, Department of Hydraulic Engineering, Tsinghua University, Beijing 100084 (China); Reible, Danny, E-mail: danny.reible@ttu.edu [Department of Civil & Environmental Engineering, Texas Tech University, Lubbock, TX 79409-1023 (United States)

2016-01-25

Highlights: • An integrated model of hydrodynamics, sediment and heavy metal transport. • Simulated heavy metal transport and transformation in the Hangzhou Bay. • Evaluated accidental discharge of {sup 137}Cs from the QFNPP was assumed. • The sediment effects on the mobility of heavy metals were analyzed. - Abstract: The environmental impact of heavy metal (Cu, Cd, Zn, Pb, Ni, {sup 90}Sr and {sup 137}Cs) transport and transformation in the Hangzhou Bay (China) was assessed through a comprehensive model that integrates hydrodynamics, sediment and heavy metal transport. A mechanistic surface complexation model was used to estimate the adsorption and desorption of heavy metal by suspended sediment under different aqueous chemistry conditions. The dynamics of metal exchange to and from the seabed was also assessed. The primary processes regulating heavy metal distribution, i.e., convection–diffusion, adsorption–desorption, sedimentation–resuspension, as well as other physical and chemical processes related to mass exchange between adjacent sediment layers, were considered in detail. The accidental discharge of {sup 137}Cs was simulated as an example and results showed that {sup 137}Cs transported along the coast driven by tidal flow. Most {sup 137}Cs distributed near the outfall and accumulated in the seabed sediment. The proposed model can be a useful tool for predicting heavy metal transport and fate and provide a theoretical basis to guide field sampling, assessment of risks and the design of remediation strategies.

Environmental assessment of heavy metal transport and transformation in the Hangzhou Bay, China

International Nuclear Information System (INIS)

Fang, Hongwei; Huang, Lei; Wang, Jingyu; He, Guojian; Reible, Danny

2016-01-01

Highlights: • An integrated model of hydrodynamics, sediment and heavy metal transport. • Simulated heavy metal transport and transformation in the Hangzhou Bay. • Evaluated accidental discharge of "1"3"7Cs from the QFNPP was assumed. • The sediment effects on the mobility of heavy metals were analyzed. - Abstract: The environmental impact of heavy metal (Cu, Cd, Zn, Pb, Ni, "9"0Sr and "1"3"7Cs) transport and transformation in the Hangzhou Bay (China) was assessed through a comprehensive model that integrates hydrodynamics, sediment and heavy metal transport. A mechanistic surface complexation model was used to estimate the adsorption and desorption of heavy metal by suspended sediment under different aqueous chemistry conditions. The dynamics of metal exchange to and from the seabed was also assessed. The primary processes regulating heavy metal distribution, i.e., convection–diffusion, adsorption–desorption, sedimentation–resuspension, as well as other physical and chemical processes related to mass exchange between adjacent sediment layers, were considered in detail. The accidental discharge of "1"3"7Cs was simulated as an example and results showed that "1"3"7Cs transported along the coast driven by tidal flow. Most "1"3"7Cs distributed near the outfall and accumulated in the seabed sediment. The proposed model can be a useful tool for predicting heavy metal transport and fate and provide a theoretical basis to guide field sampling, assessment of risks and the design of remediation strategies.

Individual, Social, and Environmental Correlates of Active Transportation Patterns in French Women.

Science.gov (United States)

Perchoux, Camille; Enaux, Christophe; Oppert, Jean-Michel; Menai, Mehdi; Charreire, Hélène; Salze, Paul; Weber, Christiane; Hercberg, Serge; Feuillet, Thierry; Hess, Franck; Roda, Célina; Simon, Chantal; Nazare, Julie-Anne

2017-01-01

The objectives were (1) to define physical activity (PA) and sedentary behaviors (SB) patterns in daily life contexts (work, leisure, and transportation) in French working women from NutriNet-Santé web-cohort and (2) to identify pattern(s) of active transportation and their individual, social, and environmental correlates. 23,432 participants completed two questionnaires to evaluate PA and SB in daily life contexts and individual representations of residential neighborhood and transportation modes. Hierarchical cluster analysis was performed which identified 6 distinct movement behavior patterns: (i) active occupation, high sedentary leisure, (ii) sedentary occupation, low leisure, (iii) sedentary transportation, (iv) sedentary occupation and leisure, (v) active transportation, and (vi) active leisure. Multinomial logistic regressions were performed to identify correlates of the "active transportation" cluster. The perceived environmental characteristics positively associated with "active transportation" included "high availability of destinations around home," "presence of bicycle paths," and "low traffic." A "positive image of walking/cycling," the "individual feeling of being physically active," and a "high use of active transport modes by relatives/friends" were positively related to "active transportation," identified as a unique pattern regarding individual and environmental correlates. Identification of PA and SB context-specific patterns will help to understand movement behaviors' complexity and to design interventions to promote active transportation in specific subgroups.

Advanced transport systems analysis, modeling, and evaluation of performances

CERN Document Server

Janić, Milan

2014-01-01

This book provides a systematic analysis, modeling and evaluation of the performance of advanced transport systems. It offers an innovative approach by presenting a multidimensional examination of the performance of advanced transport systems and transport modes, useful for both theoretical and practical purposes. Advanced transport systems for the twenty-first century are characterized by the superiority of one or several of their infrastructural, technical/technological, operational, economic, environmental, social, and policy performances as compared to their conventional counterparts. The advanced transport systems considered include: Bus Rapid Transit (BRT) and Personal Rapid Transit (PRT) systems in urban area(s), electric and fuel cell passenger cars, high speed tilting trains, High Speed Rail (HSR), Trans Rapid Maglev (TRM), Evacuated Tube Transport system (ETT), advanced commercial subsonic and Supersonic Transport Aircraft (STA), conventionally- and Liquid Hydrogen (LH2)-fuelled commercial air trans...

Using integrated environmental modeling to automate a process-based Quantitative Microbial Risk Assessment

Science.gov (United States)

Integrated Environmental Modeling (IEM) organizes multidisciplinary knowledge that explains and predicts environmental-system response to stressors. A Quantitative Microbial Risk Assessment (QMRA) is an approach integrating a range of disparate data (fate/transport, exposure, an...

Environmental economics of lignin derived transport fuels

NARCIS (Netherlands)

Obydenkova, Svetlana V.; Kouris, Panos D.; Hensen, Emiel J. M.; Heeres, Hero J.; Boot, Michael D.

2017-01-01

This paper explores the environmental and economic aspects of fast pyrolytic conversion of lignin, obtained from 2G ethanol plants, to transport fuels for both the marine and automotive markets. Various scenarios are explored, pertaining to aggregation of lignin from several sites, alternative

Bacteria transport simulation using APEX model in the Toenepi watershed, New Zealand

Science.gov (United States)

The Agricultural Policy/Environmental eXtender (APEX) model is a distributed, continuous, daily-time step small watershed-scale hydrologic and water quality model. In this study, the newly developed fecal-derived bacteria fate and transport subroutine was applied and evalated using APEX model. The e...

The Mathematical modelling of environmental pollution using the ...

African Journals Online (AJOL)

In this paper environmental pollution has been modeled mathematically using the Freundlich non-linear contaminant transport formulation. An analytical solution of lower order perturbation of the concentration C(x,f) is obtained. Flow profiles for various values of molecular diffusion D and the velocity U are studied and the ...

Air versus terrestrial transport modalities: An energy and environmental comparison

International Nuclear Information System (INIS)

Federici, M.; Ulgiati, S.; Basosi, R.

2009-01-01

In the last 15 years, worldwide air transportation has grown at an average yearly rate of 4.5%. Forecasts confirm that this could be the average increase rate for the next 20 years, although recent oscillation of oil price translated into a slowing down of such a trend, with several air companies forced out of business. Within this framework, low cost airlines keep increasing their market share, in so making airplane to compete with terrestrial transport modalities, not only for medium and long distance, but also for short trips. This is because air transport is obviously faster than transport by trains and cars, and most often it also is a cheaper option in money terms. In spite of its apparent success, air transportation is a source of concern for many analysts, because it is considered as the more energy intensive and polluting transport modality. In order to explore the correctness of such an issue, we compared air transportation to high speed trains and other modern terrestrial modalities, by using a 'whole-system' approach. The present study applies an LCA-like approach, by taking into account all the energy and materials directly and indirectly required to make and operate infrastructures (i.e. tunnels, railways, highways) and vehicles. Efficiency and environmental loading are assessed by means of Material Flow Accounting, Embodied Energy Analysis and Emergy Synthesis methods. Results point out that the gap among the environmental performances of air, road and railway modalities is significantly narrower than expected. The thermodynamic and environmental costs of road and railway infrastructure cannot be disregarded as negligible. In a selected number of cases these transport modalities perform even worse than the air transportation mode, where infrastructures play a much smaller role.

Air versus terrestrial transport modalities: An energy and environmental comparison

Energy Technology Data Exchange (ETDEWEB)

Federici, M.; Basosi, R. [Department of Chemistry and Center for Complex Systems Investigation, University of Siena, via Alcide De Gasperi 2, 53100 Siena (Italy); Ulgiati, S. [Department of Sciences for the Environment, ' ' Parthenope' ' University of Napoli, Centro Direzionale, Isola C4, I-80143 Napoli (Italy)

2009-10-15

In the last 15 years, worldwide air transportation has grown at an average yearly rate of 4.5%. Forecasts confirm that this could be the average increase rate for the next 20 years, although recent oscillation of oil price translated into a slowing down of such a trend, with several air companies forced out of business. Within this framework, low cost airlines keep increasing their market share, in so making airplane to compete with terrestrial transport modalities, not only for medium and long distance, but also for short trips. This is because air transport is obviously faster than transport by trains and cars, and most often it also is a cheaper option in money terms. In spite of its apparent success, air transportation is a source of concern for many analysts, because it is considered as the more energy intensive and polluting transport modality. In order to explore the correctness of such an issue, we compared air transportation to high speed trains and other modern terrestrial modalities, by using a ''whole-system'' approach. The present study applies an LCA-like approach, by taking into account all the energy and materials directly and indirectly required to make and operate infrastructures (i.e. tunnels, railways, highways) and vehicles. Efficiency and environmental loading are assessed by means of Material Flow Accounting, Embodied Energy Analysis and Emergy Synthesis methods. Results point out that the gap among the environmental performances of air, road and railway modalities is significantly narrower than expected. The thermodynamic and environmental costs of road and railway infrastructure cannot be disregarded as negligible. In a selected number of cases these transport modalities perform even worse than the air transportation mode, where infrastructures play a much smaller role. (author)

Energy consumption and environmental effects of passenger transport modes. A life cycle study on passenger transport modes

International Nuclear Information System (INIS)

Kalenoja, H.

1996-01-01

Energy consumption and environmental effects of different passenger transport modes vary on the different stages of the fuel chain and during the production and maintenance of vehicles and infrastructure. Energy consumption and the environmental effects calculated per passenger mileage depend strongly on the vehicle occupancy. The properties of transport modes on urban areas and on the long distance transport have been evaluated in this study. The energy consumption and environmental effects calculated per passenger mileage have been assessed for passenger car, bus, tram, train, airplane and ferry. The emissions have been evaluated during the whole fuel chain. In this study only the airborne emissions have been taken into account. In the energy consumption calculations the energy content of vehicles and the infrastructure, energy consumption during the fuel chain and during the end use have been taken into consideration. (au)

Predicting soil, water, and air concentrations of environmental contaminants locally and regionally: Multimedia transport and transformation models

International Nuclear Information System (INIS)

McKone, T.E.; Daniels, J.I.

1991-10-01

Environmental scientists recognize that the environment functions as a complex, interconnected system. A realistic risk-management strategy for many contaminants requires a comprehensive and integrated assessment of local and regional transport and transformation processes. In response to this need, we have developed multimedia models that simulate the movement and transformation of chemicals as they spread through air, water, biota, soils, sediments, surface water, and ground water. Each component of the environment is treated as a homogeneous subsystem that can exchange water, nutrients, and chemical contaminants with other adjacent compartments. In this paper, we illustrate the use of multimedia models and measurements as tools for screening the potential risks of contaminants released to air and deposited onto soil and plants. The contaminant list includes the volatile organic compounds (VOCs) tetrachloroethylene (PCE) and trichloroethylene (TCE), the semi-volatile organic compound benzo(a)pyrene, and the radionuclides tritium and uranium-238. We examine how chemical properties effect both the ultimate route and quantity of human and ecosystem contact and identify sensitivities and uncertainties in the model results

Advanced transport modeling of toroidal plasmas with transport barriers

International Nuclear Information System (INIS)

Fukuyama, A.; Murakami, S.; Honda, M.; Izumi, Y.; Yagi, M.; Nakajima, N.; Nakamura, Y.; Ozeki, T.

2005-01-01

Transport modeling of toroidal plasmas is one of the most important issue to predict time evolution of burning plasmas and to develop control schemes in reactor plasmas. In order to describe the plasma rotation and rapid transition self-consistently, we have developed an advanced scheme of transport modeling based on dynamical transport equation and applied it to the analysis of transport barrier formation. First we propose a new transport model and examine its behavior by the use of conventional diffusive transport equation. This model includes the electrostatic toroidal ITG mode and the electromagnetic ballooning mode and successfully describes the formation of internal transport barriers. Then the dynamical transport equation is introduced to describe the plasma rotation and the radial electric field self-consistently. The formation of edge transport barriers is systematically studied and compared with experimental observations. The possibility of kinetic transport modeling in velocity space is also examined. Finally the modular structure of integrated modeling code for tokamaks and helical systems is discussed. (author)

Final environmental statement on the transportation of radioactive material by air and other modes

International Nuclear Information System (INIS)

1977-12-01

An assessment is presented of the environmental impact from transportation of shipments of radioactive material into, within, and out of the United States. It is intended to serve as background material for a review by the United States Nuclear Regulatory Commission (NRC) of regulations dealing with transportation of radioactive materials. The impetus for such a review results not only from a general need to examine regulations to ensure their continuing consistency with the goal of limiting radiological impact to a level that is as low as reasonably achievable, but also from a need to respond to current national discussions of the safety and security aspects of nuclear fuel cycle materials. Chapters are included on regulations governing the transportation of radioactive materials, radiological effects, transport impact under normal conditions, impacts of transportation accidents, alternatives, and security and safeguards. A standard shipments model is also included along with a demographic model, excerpts from federal regulations, data on Pu, Population dose formulas, a list of radioactive material incidents, accident analysis methodology, and an analysis of risk assessment sensitivity

Transport Routes Optimization Model Through Application of Fuzzy Logic

Directory of Open Access Journals (Sweden)

Ivan Bortas

2018-03-01

Full Text Available The transport policy of the European Union is based on the mission of restructuring road traffic into other and energy-favourable transport modes which have not been sufficiently represented yet. Therefore, the development of the inland waterway and rail transport, and connectivity in the intermodal transport network are development planning priorities of the European transport strategy. The aim of this research study was to apply the scientific methodology and thus analyse the factors that affect the distribution of the goods flows and by using the fuzzy logic to make an optimization model, according to the criteria of minimizing the costs and negative impact on the environment, for the selection of the optimal transport route. Testing of the model by simulation, was performed on the basis of evaluating the criteria of the influential parameters with unprecise and indefinite input parameters. The testing results show that by the distribution of the goods flow from road transport network to inland waterways or rail transport, can be predicted in advance and determine the transport route with optimal characteristics. The results of the performed research study will be used to improve the process of planning the transport service, with the aim of reducing the transport costs and environmental pollution.

Environmental Development Plan for Transportation Energy Conservation. FY 79 update

Energy Technology Data Exchange (ETDEWEB)

Singh, M. K.; Bernard, III, M. J.

1978-12-15

This is the first annual update of the Environment Development Plan (EDP) for the DOE Division of Transportation Energy Conservation program. It identifies the ecosystem, resource, physical environment, health, safety, and socioeconomic concerns associated with the division's transportation programs. These programs include the research, development, demonstration and assessment (RDD and A) of seventeen transportation technologies and several strategy and policy development and implementation projects. The transportation technologies projects deal with highway transport including electric vehicles, marine transport and pipeline transport. This EDP presents a research and assessment plan for resolving any potentially adverse environmental concerns stemming from these programs.

Inverse modelling for flow and transport in porous media

International Nuclear Information System (INIS)

Giudici, M.

2004-01-01

The problem of parameter identification for flow and transport model in porous media is discussed in this communication. First, a general framework for the development and application of environmental models is discussed. Then the forward and inverse problems for discrete models are described in detail, introducing fundamental concepts (uniqueness, identifiability, stability, conditioning). The importance of model scales is reviewed and is shown its link with the stability and conditioning issues. Finally some remarks are given to the use of several independent sets of data in inverse modelling

Savannah River Laboratory environmental transport and effects research. Annual report, 1974

International Nuclear Information System (INIS)

Crawford, T.V.

1975-06-01

The principal objective of environmental transport research at the Savannah River Laboratory (SRL) is to develop, apply, adapt, use, test, and verify models that predict the directions and magnitude of ecosystem processes. Since an ecosystem is understood to be a complex ecological unit composed of physical, chemical, and biotic components interacting in the cycling and transport of matter and the flow of energy, the understanding of ecosystem processes demands integrated study by scientists of differing disciplines. Data are included from studies on factors that affect the atmospheric transport and dispersion of radionuclides and chemical effluents; surface and groundwater transport of various pollutants following release to the soil surface or a flowing stream; the uptake and retention of tritium oxide by pine trees; calculations of the radiation dose commitment for human populations from 14 C released by the nuclear industry; the effects of thermal effluents on aquatic organisms, including plankton productivity, the population dynamics of freshwater snails, and the growth and respiration rates of the sand-burrowing mayfly (Dolania americana). Data are included from a survey of seismic activity in South Carolina. (CH)

The UK transport carbon model: An integrated life cycle approach to explore low carbon futures

International Nuclear Information System (INIS)

Brand, Christian; Tran, Martino; Anable, Jillian

2012-01-01

Current debate focuses on the need for the transport sector to contribute to more ambitious carbon emission reduction targets. In the UK, various macro-economic and energy system wide, top-down models are used to explore the potential for energy demand and carbon emissions reduction in the transport sector. These models can lack the bottom-up, sectoral detail needed to simulate the effects of integrated demand and supply-side policy strategies to reduce emissions. Bridging the gap between short-term forecasting and long-term scenario “models”, this paper introduces a newly developed strategic transport, energy, emissions and environmental impacts model, the UK Transport Carbon Model (UKTCM). The UKTCM covers the range of transport–energy–environment issues from socio-economic and policy influences on energy demand reduction through to life cycle carbon emissions and external costs. The model is demonstrated in this paper by presenting the results of three single policies and one policy package scenario. Limitations of the model are also discussed. Developed under the auspices of the UK Energy Research Centre (UKERC) the UKTCM can be used to develop transport policy scenarios that explore the full range of technological, fiscal, regulatory and behavioural change policy interventions to meet UK climate change and energy security goals. - Research highlights: ►New strategic transport, energy, emissions and environmental impacts model. ►Tool to develop and analyse full consequences of multiple scenarios of transport policy packages. ►Novel approach to modelling demand for new vehicles by market and technology. ►Model available for use by research community via http://www.ukerc.ac.uk/support/tiki-index.php?page=UK+Transport+Carbon+Model.

Environmental impacts of public transport. Why peak-period travellers cause a greater environmental burden than off-peak travellers

International Nuclear Information System (INIS)

Rietveld, P.

2002-01-01

Given the difference between peak and off-peak occupancy rates in public transport, emissions per traveller kilometre are lower in the peak than in the off-peak period, whereas the opposite pattern is observed for cars. It is argued that it is much more fruitful to analyse environmental effects in marginal terms. This calls for a careful analysis of capacity management policies of public transport suppliers that are facing increased demand during both peak and off-peak periods. A detailed analysis of capacity management by the Netherlands Railways (NS) revealed that off-peak capacity supply is mainly dictated by the demand levels during the peak period. The analysis included the effects of increased frequency and increased vehicle size on environmental impacts, while environmental economies of vehicle size were also taken into account. The main conclusion is that the marginal environmental burden during the peak hours is much higher than is usually thought, whereas it is almost zero during the off-peak period. This implies a pattern that is the precise opposite of the average environmental burden. Thus, an analysis of environmental effects of public transport based on average performance would yield misleading conclusions [nl

Field-scale water flow and solute transport : SWAP model concepts, parameter estimation and case studies = [Waterstroming en transport van opgeloste stoffen op veldschaal

NARCIS (Netherlands)

Dam, van J.C.

2000-01-01

Water flow and solute transport in top soils are important elements in many environmental studies. The agro- and ecohydrological model SWAP (Soil-Water-Plant-Atmosphere) has been developed to simulate simultaneously water flow, solute transport, heat flow and crop growth at field scale

THE CONCEPT OF ORGANIZING TRANSPORT AND LOGISTICS PROCESSES, TAKING INTO ACCOUNT THE ECONOMIC, SOCIAL AND ENVIRONMENTAL ASPECTS

Directory of Open Access Journals (Sweden)

Leszek MINDUR

2015-12-01

Full Text Available Current model of organization of supply chains results in inefficient use of transport resources, high transport costs, increasing congestions and CO2 emission. This effect has been demonstrated by research conducted by the authors as well as by the European Environmental Agency. This situation can be change by development of alternative business model for collaboration in organisation of the transport processes within the supply chains. The aim of this paper is to present practical implementation of the T-Scale platform that enables collaboration between independent transport users and transport service providers. Moreover, an overview of existing communication platform with its major functionalities are presented. The work is summarized by the major benefits of collaboration achieved by the group of companies operating in the FMCG sector in Poland.

77 FR 18879 - Department of Transportation Final Environmental Justice Strategy

Science.gov (United States)

2012-03-28

... Transportation Final Environmental Justice Strategy AGENCY: Office of the Secretary of Transportation, DOT... strategy, which sets forth DOT's commitment to identifying and addressing disproportionately high and...-income populations. This strategy is published as a final document; however, it is a revision of a...

UZ Colloid Transport Model

International Nuclear Information System (INIS)

McGraw, M.

2000-01-01

The UZ Colloid Transport model development plan states that the objective of this Analysis/Model Report (AMR) is to document the development of a model for simulating unsaturated colloid transport. This objective includes the following: (1) use of a process level model to evaluate the potential mechanisms for colloid transport at Yucca Mountain; (2) Provide ranges of parameters for significant colloid transport processes to Performance Assessment (PA) for the unsaturated zone (UZ); (3) Provide a basis for development of an abstracted model for use in PA calculations

Using Integrated Environmental Modeling to Automate a Process-Based Quantitative Microbial Risk Assessment (presentation)

Science.gov (United States)

Integrated Environmental Modeling (IEM) organizes multidisciplinary knowledge that explains and predicts environmental-system response to stressors. A Quantitative Microbial Risk Assessment (QMRA) is an approach integrating a range of disparate data (fate/transport, exposure, and...

EVALUATION OF THE STATE-OF-THE-ART CONTAMINATED SEDIMENT TRANSPORT AND FATE MODELING SYSTEM

Science.gov (United States)

Modeling approaches for evaluating the transport and fate of sediment and associated contaminants are briefly reviewed. The main emphasis is on: 1) the application of EFDC (Environmental Fluid Dynamics Code), the state-of-the-art contaminated sediment transport and fate public do...

Food transport refrigeration - Approaches to reduce energy consumption and environmental impacts of road transport

International Nuclear Information System (INIS)

Tassou, S.A.; De-Lille, G.; Ge, Y.T.

2009-01-01

Food transport refrigeration is a critical link in the food chain not only in terms of maintaining the temperature integrity of the transported products but also its impact on energy consumption and CO 2 emissions. This paper provides a review of (a) current approaches in road food transport refrigeration, (b) estimates of their environmental impacts, and (c) research on the development and application of alternative technologies to vapour compression refrigeration systems that have the potential to reduce the overall energy consumption and environmental impacts. The review and analysis indicate that greenhouse gas emissions from conventional diesel engine driven vapour compression refrigeration systems commonly employed in food transport refrigeration can be as high as 40% of the greenhouse gas emissions from the vehicle's engine. For articulated vehicles over 33 ton, which are responsible for over 80% of refrigerated food transportation in the UK, the reject heat available form the engine is sufficient to drive sorption refrigeration systems and satisfy most of the refrigeration requirements of the vehicle. Other promising technologies that can lead to a reduction in CO 2 emissions are air cycle refrigeration and hybrid systems in which conventional refrigeration technologies are integrated with thermal energy storage. For these systems, however, to effectively compete with diesel driven vapour compression systems, further research and development work is needed to improve their efficiency and reduce their weight

Economic and environmental impacts of alternative transportation technologies.

Science.gov (United States)

2013-04-01

This project has focused on comparing alternative transportation technologies in terms of their : environmental and economic impacts. The research is data-driven and quantitative, and examines the : dynamics of impact. We have developed new theory an...

Assessment of the environmental benefits of transport and stationary fuel

International Nuclear Information System (INIS)

Bauen, A.; Hart, D.

2000-01-01

Fuel cells (FCs) offer significant environmental benefits over competing technologies and hence the environment is a strong driving force behind the development of FC systems for transport and stationary applications. This paper provides a comprehensive comparison of FC and competing systems, and points out strengths and weaknesses of the different FC systems, suggesting areas for improvement. The results presented build on earlier work [D. Hart, G. Hoermandinger, Initial assessment of the environmental characteristics of fuel cells and competing technologies, ETSU F/02/00111/REP/1, ETSU, Harwell, UK, 1997.] and provide a detailed analysis of a wider range of systems, The analysis takes the form of a model, which compares system emissions (global, regional and local pollutants) and energy consumption on a full fuel cycle basis. It considers a variety of primary energy sources, intermediate fuel supply steps and FC systems for transport and stationary end-uses. These are compared with alternative systems for transport and stationary applications. Energy and pollutant emission reductions of FC systems compared to alternative vehicle technology vary considerably, though all FC technologies show reduction in energy use and CO 2 emissions of at least 20%; as well as reductions of several orders of magnitude in regulated pollutants compared to the base-case vehicle. The location of emissions is also of importance, with most emissions in the case of FC vehicles occurring in the fuel supply stage. The energy, CO 2 and regulated emissions advantages of FC systems for distributed and baseload electricity are more consistent than for transport applications, with reductions in regulated pollutants generally larger than one order of magnitude compared to competing technologies. For CHP applications, the advantages of FC systems with regard to regulated pollutants remain large. However, energy and CO 2 emission advantages are reduced, depending largely on the assumptions made

Individual, Social, and Environmental Correlates of Active Transportation Patterns in French Women

Directory of Open Access Journals (Sweden)

Camille Perchoux

2017-01-01

Full Text Available The objectives were (1 to define physical activity (PA and sedentary behaviors (SB patterns in daily life contexts (work, leisure, and transportation in French working women from NutriNet-Santé web-cohort and (2 to identify pattern(s of active transportation and their individual, social, and environmental correlates. 23,432 participants completed two questionnaires to evaluate PA and SB in daily life contexts and individual representations of residential neighborhood and transportation modes. Hierarchical cluster analysis was performed which identified 6 distinct movement behavior patterns: (i active occupation, high sedentary leisure, (ii sedentary occupation, low leisure, (iii sedentary transportation, (iv sedentary occupation and leisure, (v active transportation, and (vi active leisure. Multinomial logistic regressions were performed to identify correlates of the “active transportation” cluster. The perceived environmental characteristics positively associated with “active transportation” included “high availability of destinations around home,” “presence of bicycle paths,” and “low traffic.” A “positive image of walking/cycling,” the “individual feeling of being physically active,” and a “high use of active transport modes by relatives/friends” were positively related to “active transportation,” identified as a unique pattern regarding individual and environmental correlates. Identification of PA and SB context-specific patterns will help to understand movement behaviors’ complexity and to design interventions to promote active transportation in specific subgroups.

The application of strategic environmental assessment in a non-mandatory context: Regional transport planning in New Zealand

International Nuclear Information System (INIS)

McGimpsey, Paul; Morgan, Richard K.

2013-01-01

There is no legal mandate for strategic environmental assessment (SEA) in New Zealand. However, a requirement to consider environmental and sustainability issues is a key feature of many statutes, including that relating to regional transport planning. Given this, the research sought to determine whether SEA could be used to improve the incorporation of environmental and sustainability aspects into the regional transport planning process in New Zealand. Existing practice was evaluated, examining what factors currently limiting the consideration of environmental and sustainability issues and to what extent elements of SEA are currently being used. The research culminated in the development of a conceptual model where SEA elements could be incorporated into the existing framework to promote improved consideration of environmental and sustainability issues. The results provide some reassurance about the value of SEA even where its application is not legally mandated. However, it also highlighted some ongoing issues around the integration of SEA in existing frameworks and around the scope of SEA as a decision-aiding tool. -- Highlights: • The research examined whether SEA can provide benefits even where it is not mandated. • The research examined the extent to which SEA elements are currently being used. • A conceptual model was developed to incorporate necessary SEA elements into an existing framework

The application of strategic environmental assessment in a non-mandatory context: Regional transport planning in New Zealand

Energy Technology Data Exchange (ETDEWEB)

McGimpsey, Paul, E-mail: paul.mcgimpsey@urs.com [URS, St. George' s House, 5 St. George' s Road, London SW19 4DR (United Kingdom); Morgan, Richard K., E-mail: rkm@geography.otago.ac.nz [Department of Geography, University of Otago, PO Box 56, Dunedin 9054 (New Zealand)

2013-11-15

There is no legal mandate for strategic environmental assessment (SEA) in New Zealand. However, a requirement to consider environmental and sustainability issues is a key feature of many statutes, including that relating to regional transport planning. Given this, the research sought to determine whether SEA could be used to improve the incorporation of environmental and sustainability aspects into the regional transport planning process in New Zealand. Existing practice was evaluated, examining what factors currently limiting the consideration of environmental and sustainability issues and to what extent elements of SEA are currently being used. The research culminated in the development of a conceptual model where SEA elements could be incorporated into the existing framework to promote improved consideration of environmental and sustainability issues. The results provide some reassurance about the value of SEA even where its application is not legally mandated. However, it also highlighted some ongoing issues around the integration of SEA in existing frameworks and around the scope of SEA as a decision-aiding tool. -- Highlights: • The research examined whether SEA can provide benefits even where it is not mandated. • The research examined the extent to which SEA elements are currently being used. • A conceptual model was developed to incorporate necessary SEA elements into an existing framework.

INDICATOR OF ENVIRONMENTAL PROBLEMS OF AGRICULTURAL SECTORS UNDER THE ENVIRONMENTAL MODELING

Directory of Open Access Journals (Sweden)

Pruethsan Sutthichaimethee

2016-04-01

Full Text Available The objective of this research is to propose an indicator to deal with environmental problems for agricultural sectors caused by goods and services production. The aspects to calculate the real benefit of agricultural sectors and environmental cost for analyzing are natural resources materials, energy and transportation, fertilizer and pesticides, and sanitary and similar service. From the research it was found that the highest environmental cost of natural resources materials was 026: charcoal and fire-wood, while the lowest was 010 coconut. The highest environmental cost for energy and transportation was 024: agricultural services, while the highest environmental cost for fertilizer and pesticides was 011: palm oil. lastly, 017: other agricultural products was found as the highest environmental cost for sanitary and similar service. As a result, 010: coconut gained the highest real benefit, while 024: agricultural services presented as the lowest read benefit for the company. If Thailand using environmental problem indicator, especially with the agricultural sector, it can help to formulate efficient policies and strategies for the country in 3 development areas, which are social, economic, and environmental development.

A Process-Based Transport-Distance Model of Aeolian Transport

Science.gov (United States)

Naylor, A. K.; Okin, G.; Wainwright, J.; Parsons, A. J.

2017-12-01

We present a new approach to modeling aeolian transport based on transport distance. Particle fluxes are based on statistical probabilities of particle detachment and distributions of transport lengths, which are functions of particle size classes. A computational saltation model is used to simulate transport distances over a variety of sizes. These are fit to an exponential distribution, which has the advantages of computational economy, concordance with current field measurements, and a meaningful relationship to theoretical assumptions about mean and median particle transport distance. This novel approach includes particle-particle interactions, which are important for sustaining aeolian transport and dust emission. Results from this model are compared with results from both bulk- and particle-sized-specific transport equations as well as empirical wind tunnel studies. The transport-distance approach has been successfully used for hydraulic processes, and extending this methodology from hydraulic to aeolian transport opens up the possibility of modeling joint transport by wind and water using consistent physics. Particularly in nutrient-limited environments, modeling the joint action of aeolian and hydraulic transport is essential for understanding the spatial distribution of biomass across landscapes and how it responds to climatic variability and change.

Analysis on Transportation Infrastructure Availability to Achieve Environmental and Social Sustainability in Karawang

Science.gov (United States)

Rarasati, A. D.; Octoria, N. B.

2018-03-01

Sustainable infrastructure is the key to development success. At the same time, transportation infrastructure development will involve social and environmental conditions of the local surroundings. Assessment of the availability of such transport infrastructure is one of the solutions adapted from social and environmental impacts. By conducting a correlation test, the presence of transportation infrastructure and the social conditions of the environment can be identified. The results obtained show that the accessibility, the level of security, and the level of equality are correlated to social and environmental sustainability in Karawang. In terms of environment, the availability of transportation infrastructure is not directly related to the impact of environmental sustainability. The impact of the perceived environment also has no effect on the journey. Correlation results indicate that the length of travel time and congestion level do not make the perceived impact greater. The impact of the perceived environment is merely due to the high utilization of private vehicles in Karawang which subsequently leads to higher energy consumption.

Energy and Environmental Issues, 1991. Transportation research record

International Nuclear Information System (INIS)

1991-01-01

Partial Contents: Mitigation of Traffic Mortality of Endangered Brown Pelicans on Coastal Bridges; Cooperation Between State Highway and Environmental Agencies in Dealing With Hazardous Waste in the Right-of-Way; Comparison of Intersection Air Quality Models' Ability to Simulate Carbon Monoxide Concentrations in an Urban Area; Model Calculation of Environment-Friendly Traffic Flows in Urban Networks; Sensitivity Analysis for Land Use, Transportation, and Air Quality; Special Events and Carbon Monoxide Violations: TSM, Crowd Control, Economics, and Solutions to Adverse Air Quality Impacts; Mode Split at Large Special Events and Effects on Air Quality; Internal Consistency and Stability of Measurements of Community Reaction to Noise; Impact and Potential Use of Attitude and Other Modifying Variables in Reducing Community Reaction to Noise; Techniques for Aesthetic Design of Freeway Noise Barriers; Effects of Road Surface Texture on Traffic and Vehicle Noise; Electrokinetic Soil Processing in Waste Remediation and Treatment: Synthesis of Available Data; Site Remediation by In Situ Vitrification

Differences in environmental preferences towards cycling for transport among adults: a latent class analysis.

Science.gov (United States)

Mertens, Lieze; Van Cauwenberg, Jelle; Ghekiere, Ariane; De Bourdeaudhuij, Ilse; Deforche, Benedicte; Van de Weghe, Nico; Van Dyck, Delfien

2016-08-12

Increasing cycling for transport can contribute to improve public health among adults. Micro-environmental factors (i.e. small-scaled street-setting features) may play an important role in affecting the street's appeal to cycle for transport. Understanding about the interplay between individuals and their physical environment is important to establish tailored environmental interventions. Therefore, the current study aimed to examine whether specific subgroups exist based on similarities in micro-environmental preferences to cycle for transport. Responses of 1950 middle-aged adults (45-65 years) on a series of choice tasks depicting potential cycling routes with manipulated photographs yielded three subgroups with different micro-environmental preferences using latent class analysis. Although latent class analysis revealed three different subgroups in the middle-aged adult population based on their environmental preferences, results indicated that cycle path type (i.e. a good separated cycle path) is the most important environmental factor for all participants and certainly for individuals who did not cycle for transport. Furthermore, only negligible differences were found between the importances of the other micro-environmental factors (i.e. traffic density, evenness of the cycle path, maintenance, vegetation and speed limits) regarding the two at risk subgroups and that providing a speed bump obviously has the least impact on the street's appeal to cycle for transport. Results from the current study indicate that only negligible differences were found between the three subgroups. Therefore, it might be suggested that tailored environmental interventions are not required in this research context.

Behavioural economics, travel behaviour and environmental-transport policy

NARCIS (Netherlands)

Garcia-Sierra, M.; van den Bergh, J.C.J.M.; Miralles, C.

2015-01-01

The transport sector creates much environmental pressure. Many current policies aimed at reducing this pressure are not fully effective because the behavioural aspects of travellers are insufficiently recognised. Insights from behavioural economics can contribute to a better understanding of travel

Optimization models to reduce CO2 emissions and energy consumption of transport in open pit mines

Energy Technology Data Exchange (ETDEWEB)

Alpizar, Maria J.; Morales, Nelson; Wiertz, Jaques [Universidad de Chile (Chile)

2010-07-01

In the mining industry, approximately 20% of total cost corresponds to material transportation and, in the case of copper, 25% of the total energy consumed for extraction. These high values, together with growing concerns over excess CO2 emissions, have motivated the development of the optimization models discussed in this paper. The objective was to introduce energy and environmental variables into production planning and scheduling. The methodology includes variables that can save transportation energy and models that decrease material rehandling and hence, the cost of transportation. Two types of variables were adapted in the model: environmental and energetic. The advantage, leaving aside the costs and mileage of transportation, was a reduction in emissions of CO2 and in the amount of diesel used. With the inclusion of blending constraints, this model could be used in milling or other such processes. The results are shown using graphs. It worth noting that rehandling decreased, Cu production increased, and the model was able to calculate the extraction sequence over all time horizons.

Modeling tritium transport in the environment

International Nuclear Information System (INIS)

Murphy, C.E. Jr.

1986-01-01

A model of tritium transport in the environment near an atmospheric source of tritium is presented in the general context of modeling material cycling in ecosystems. The model was developed to test hypotheses about the process involved in tritium cycling. The temporal and spatial scales of the model were picked to allow comparison to environmental monitoring data collected in the vicinity of the Savannah River Plant. Initial simulations with the model showed good agreement with monitoring data, including atmospheric and vegetation tritium concentrations. The model can also simulate values of tritium in vegetation organic matter if the key parameter distributing the source of organic hydrogen is varied to fit the data. However, because of the lack of independent conformation of the distribution parameter, there is still uncertainty about the role of organic movement of tritium in the food chain, and its effect on the dose to man

A guide to environmental best practice for company transport

Energy Technology Data Exchange (ETDEWEB)

1992-11-01

Companies have a significant influence on the car fleet sector. The transport sector is a growing source of CO[sub 2] emissions. Companies should: nominate a manager to take responsibility for the company's overall environmental policy; purchase the most fuel-efficient vehicle for the purpose; arrange proper maintenance of all vehicles; set an energy target to reduce fuel consumption; measure the performance of company cars and provide training in safe and economical driving techniques; encourage the use of public transport or car sharing; and consider alternatives to distribution of products by road transport. 5 refs.

Environmental impact assessment of decommissioning treatment about radioactive model plant waste ore storage site

International Nuclear Information System (INIS)

Bei Xinyu

2012-01-01

Aiming at decommissioning treatment project of radioactive model plant waste ore storage site, based on the detailed investigations of source terms and project description, systematic environmental impacts have been identified. The environmental impacts both during decommissioning treatment, radioactive waste transportation and after treatment are assessed. Some specific environmental protection measures are proposed so as to minimize the adverse environmental impacts. (author)

Long-term environmental and health implications of morphological change and sediment transport with respect to contaminants

Science.gov (United States)

Sneddon, Christopher; Copplestone, David; Tyler, Andrew; Hunter, Peter; Smith, Nick

2014-05-01

The EPSRC-funded Adaptation and Resilience of Coastal Energy Supply (ARCoES) project encompasses four research strands, involving 14 institutions and six PhD studentships. ARCoES aims to determine the threats posed to future energy generation and the distribution network by flooding and erosion, changing patterns of coastal sedimentation, water temperature and the distribution of plants and animals in the coastal zone. Whilst this research has direct benefits for the operation of coastal power stations, ARCoES aims to have a wider stakeholder engagement through assessing how the resilience of coastal communities may be altered by five hundred years of coastal evolution. Coastal evolution will have substantial implications for the energy sector of the North West of England as former waste storage sites are eroded and remobilised within the intertidal environment. The current intertidal environmental stores of radioactivity will also experience reworking as ocean chemistry changes and saltmarsh chronologies are reworked in response to rising sea levels. There is a duel requirement to understand mass sediment movement along the North West coast of England as understanding the sediment transport dynamics is key to modelling long term coastal change and understanding how the environmental store of radioactivity will be reworked. The University of Stirling is researching the long-term environmental and health implications of remobilisation and transport of contaminated sediments around the UK coastline. Using a synergy of hyperspectral and topographic information the mobilisation of sediment bound contaminants within the coastal environment will be investigated. Potential hazards posed by contaminants are determined by a set of environmental impact test criteria which evaluate the bio-accessibility and ionising dose of contaminants. These test criteria will be used to comment on the likely environmental impact of modelled sediment transport and anticipated changes in

A set of integrated environmental transport and diffusion models for calculating hazardous releases

International Nuclear Information System (INIS)

Pepper, D.W.

1996-01-01

A set of numerical transport and dispersion models is incorporated within a graphical interface shell to predict hazardous material released into the environment. The visual shell (EnviroView) consists of an object-oriented knowledge base, which is used for inventory control, site mapping and orientation, and monitoring of materials. Graphical displays of detailed sites, building locations, floor plans, and three-dimensional views within a room are available to the user using a point and click interface. In the event of a release to the environment, the user can choose from a selection of analytical, finite element, finite volume, and boundary element methods, which calculate atmospheric transport, groundwater transport, and dispersion within a building interior. The program runs on 486 personal computers under WINDOWS

Abiotic/biotic coupling in the rhizosphere: a reactive transport modeling analysis

Science.gov (United States)

Lawrence, Corey R.; Steefel, Carl; Maher, Kate

2014-01-01

A new generation of models is needed to adequately simulate patterns of soil biogeochemical cycling in response changing global environmental drivers. For example, predicting the influence of climate change on soil organic matter storage and stability requires models capable of addressing complex biotic/abiotic interactions of rhizosphere and weathering processes. Reactive transport modeling provides a powerful framework simulating these interactions and the resulting influence on soil physical and chemical characteristics. Incorporation of organic reactions in an existing reactive transport model framework has yielded novel insights into soil weathering and development but much more work is required to adequately capture root and microbial dynamics in the rhizosphere. This endeavor provides many advantages over traditional soil biogeochemical models but also many challenges.

Environmental impact of oil transportation. Programme and abstracts

International Nuclear Information System (INIS)

Kerimov, M.; Mustafayev, I.; Garibov, A.; Steinhausler, F.

2005-11-01

Scientists from different countries took part at the Sixth framework programme (INCO) workshop: Azerbaijan, Turkey, Georgia, Greece, Russia, Austria, Romania, Lithuania, Norway and France. Mainly they considered problems of environmental contamination occurring during production, storage and transportation of oil and oil wastes. Also some aspects of radiation-environmental monitoring in the Caspian region, radiation safety problems in oil industry and new methods and technique of dosimetry of ionizing radiation and impact of human cooperation on these activities are described here

Modeling environmental policy

International Nuclear Information System (INIS)

Martin, W.E.; McDonald, L.A.

1997-01-01

The eight book chapters demonstrate the link between the physical models of the environment and the policy analysis in support of policy making. Each chapter addresses an environmental policy issue using a quantitative modeling approach. The volume addresses three general areas of environmental policy - non-point source pollution in the agricultural sector, pollution generated in the extractive industries, and transboundary pollutants from burning fossil fuels. The book concludes by discussing the modeling efforts and the use of mathematical models in general. Chapters are entitled: modeling environmental policy: an introduction; modeling nonpoint source pollution in an integrated system (agri-ecological); modeling environmental and trade policy linkages: the case of EU and US agriculture; modeling ecosystem constraints in the Clean Water Act: a case study in Clearwater National Forest (subject to discharge from metal mining waste); costs and benefits of coke oven emission controls; modeling equilibria and risk under global environmental constraints (discussing energy and environmental interrelations); relative contribution of the enhanced greenhouse effect on the coastal changes in Louisiana; and the use of mathematical models in policy evaluations: comments. The paper on coke area emission controls has been abstracted separately for the IEA Coal Research CD-ROM

Differences in environmental preferences towards cycling for transport among adults: a latent class analysis

Directory of Open Access Journals (Sweden)

Lieze Mertens

2016-08-01

Full Text Available Abstract Background Increasing cycling for transport can contribute to improve public health among adults. Micro-environmental factors (i.e. small-scaled street-setting features may play an important role in affecting the street’s appeal to cycle for transport. Understanding about the interplay between individuals and their physical environment is important to establish tailored environmental interventions. Therefore, the current study aimed to examine whether specific subgroups exist based on similarities in micro-environmental preferences to cycle for transport. Methods Responses of 1950 middle-aged adults (45–65 years on a series of choice tasks depicting potential cycling routes with manipulated photographs yielded three subgroups with different micro-environmental preferences using latent class analysis. Results Although latent class analysis revealed three different subgroups in the middle-aged adult population based on their environmental preferences, results indicated that cycle path type (i.e. a good separated cycle path is the most important environmental factor for all participants and certainly for individuals who did not cycle for transport. Furthermore, only negligible differences were found between the importances of the other micro-environmental factors (i.e. traffic density, evenness of the cycle path, maintenance, vegetation and speed limits regarding the two at risk subgroups and that providing a speed bump obviously has the least impact on the street’s appeal to cycle for transport. Conclusions Results from the current study indicate that only negligible differences were found between the three subgroups. Therefore, it might be suggested that tailored environmental interventions are not required in this research context.

Condensing a detailed groundwater flow and contaminant transport model into a geosphere model for environmental and safety assessment

International Nuclear Information System (INIS)

Chan Tin; Melnyk, Ted

2004-01-01

AECL (Atomic Energy of Canada Limited) is preparing an Environmental Impact Statement (EIS) to present its case to a federal environmental assessment panel for a concept for disposal of Canada's nuclear fuel waste. The concept is that of a sealed vault constructed at a depth of 500 to 1,000 m in plutonic rock of the Canadian Shield. An analysis of disposal system performance using a probabilistic system variability analysis code (SYVAC3-CC3) has been an important component of the assessment of the long-term safety and environmental impacts of the disposal system. In the assessment, the disposal system is divided into vault, geosphere and biosphere, each of which is represented by a computationally simplified model. This paper summarizes the procedure for condensing a detailed 3-D finite-element hydrogeological model into the SYVAC3-CC3 geosphere model, GEONET. (author)

Environmental management system for transportation maintenance operations : [technical brief].

Science.gov (United States)

2014-04-01

This report provides the framework for the environmental management system to analyze : greenhouse gas emissions from transportation maintenance operations. The system enables user : to compare different scenarios and make informed decisions to minim...

Department of Environmental and Radiation Transport Physics - Overview

International Nuclear Information System (INIS)

Woznicka, U.

2001-01-01

Full text: We deal with environmental physics and the radiation transport physics, both theoretically and experimentally. Some results find their way to practical applications. Our environmental physics research encompasses hydrogeological problems as well as measurements of trace elements in the atmosphere and in the water. Theoretical (analytical and numerical) and experimental issues of the radiation transport and radiation fields are our main field of research. The interest in radiation transport phenomena is stimulated by their importance for the environmental physics, industrial and nuclear facilities and methods of geophysical. Environmental isotopes and noble gases are used in the investigation of water-bearing geological formations in order to determine the origin and age of groundwater. The papers listed below and three ''Reports on research'' present recent achievements in this field. The gas chromatography methods are used for monitoring the anthropogenic trace gases (SF 6 and freons), which participate in the Earth green-house effect. A very high detection level of SF 6 in water, 0.0028 fg/cm 3 H 2 0, has been reached as required for hydrogeological purposes. A preliminary verification of the SF 6 tracer method for dating young groundwaters by the tritium method has been carried out. We carried on the work on a method of radon measurement in soil in connection with geological conditions. The national seminar ''Radon in Environment'' organized at the INP aroused an interest of Polish scientific centres in that field. The seminar gathered 60 participants who presented 24 oral reports and 8 posters. Within the scope of the radiation transport physics we studied thermal neutron transport in finite hydrogenous media. Advantages and limitations of a Monte Carlo code (MCNP) in thermal neutron transport simulations have been examined by both the analytical solution and the experiment on the INP pulsed neutron generator. An interesting contribution to the

Framework for Assessing Indicators of Environmental Impacts in the Transport Sector

DEFF Research Database (Denmark)

Joumard, Robert; Gudmundsson, Henrik; Folkeson, Lennart

2011-01-01

The following questions were addressed in this study: How can environmental impacts of transport be identified? How can the impacts be represented by operational indicators? How can several indicators be considered jointly? How can indicators be used in planning and decision making? First......, a definition of the phrase “indicator of environmental impacts in the transport sector” was derived. The concept of a chain of causality between a source and a final target was developed as a common reference for indicators and their assessment. Criteria and methods for the assessment and selection...

Medard - An Environmental Modelling Project for the Territory of the Czech Republic

Czech Academy of Sciences Publication Activity Database

Eben, Kryštof; Juruš, Pavel; Resler, Jaroslav; Belda, Michal; Krueger, B.C.

č. 61 (2005), s. 18-19 ISSN 0926-4981 Institutional research plan: CEZ:AV0Z10300504 Keywords : air quality forecasting * chemistry transport models * operational environmental prediction * data assimilation Subject RIV: BA - General Mathematics

A model for development of freight transport; En model for godstransportens udvikling

Energy Technology Data Exchange (ETDEWEB)

Kveiborg, O. [National Environmental Res., Systems Analysis Dept. Roskilde (Denmark)

2001-01-01

This report describes the results of a large project conducted in a corporation between Statistics Denmark and the Danish National Environmental Research Institute. The main objective of the project has been to analyse the possibilities of prescribing the development in the Danish freight transport in a more appropriate and precise way than it is done by existing models. A secondary objective of the project was to develop a model based on the findings of the analysis. The intention was to be able to describe all areas of freight transport. The analysis has proven it impossible to improve the existing calculations in some areas of transport. Hence, the project has been narrowed down to focus exclusively on road freight transport. The developed model distinguishes itself from existing models by a much higher level of detail in the calculations. This enables the model to describe the structural relations between transport and economic activity, which has previously been subsumed in the aggregate calculations of existing models. The work carried out in the process of developing a model for the freight transport has encountered many difficulties. The findings described in this report are merely one step towards a better understanding of the relation between economic development and transport. The descriptions on the following pages will describe some of the difficulties we have had in achieving an appropriate statistical description of the different linkages. Furthermore, the calculations carried out with the model point at other unsolved problems. There is an indication that the model tends to overestimate the developments in freight transport. In this respect, the very disaggregate calculations of the model can be seen as both an advantage and as a disadvantage because each extra calculation gives rise to further uncertainties in the overall result. Even though we have had great difficulties finding adequate descriptions of the development in the factors in the model

Three essays in transportation energy and environmental policy

Science.gov (United States)

Hajiamiri, Sara

Concerns about climate change, dependence on oil, and unstable gasoline prices have led to significant efforts by policymakers to cut greenhouse gas (GHG) emissions and oil consumption. The transportation sector is one of the principle emitters of CO2 in the US. It accounts for two-thirds of total U.S. oil consumption and is almost entirely dependent on oil. Within the transportation sector, the light-duty vehicle (LDV) fleet is the main culprit. It is responsible for more than 65 percent of the oil used and for more than 60 percent of total GHG emissions. If a significant fraction of the LDV fleet is gradually replaced by more fuel-efficient technologies, meaningful reductions in GHG emissions and oil consumption will be achieved. This dissertation investigates the potential benefits and impacts of deploying more fuel-efficient vehicles in the LDV fleet. Findings can inform decisions surrounding the development and deployment of the next generation of LDVs. The first essay uses data on 2003 and 2006 model gasoline-powered passenger cars, light trucks and sport utility vehicles to investigate the implicit private cost of improving vehicle fuel efficiencies through reducing other desired attributes such as weight (that is valued for its perceived effect on personal safety) and horsepower. Breakeven gasoline prices that would justify the estimated implicit costs were also calculated. It is found that to justify higher fuel efficiency standards from a consumer perspective, either the external benefits need to be very large or technological advances will need to greatly reduce fuel efficiency costs. The second essay estimates the private benefits and societal impacts of electric vehicles. The findings from the analysis contribute to policy deliberations on how to incentivize the purchase and production of these vehicles. A spreadsheet model was developed to estimate the private benefits and societal impacts of purchasing and utilizing three electric vehicle

ENVIRONMENTAL ASSESSMENT OF ROAD TRANSPORT IN A PASSENGER CAR USING THE LIFE CYCLE APPROACH

Directory of Open Access Journals (Sweden)

Piotr FOLĘGA

2017-06-01

Full Text Available Environmental issues are an increasingly important aspect of management in the transport sector; new methods have been developed for assessment of the environment in the transport sector using the life cycle approach. The paper presents the application of Well to Wheel (WTW and Life Cycle Assessment (LCA in the transport sector. The WTW method focuses on energy analysis and greenhouse gas emissions during the life cycle of fuels. WTW is used to support decision-making on the environmental aspects of transport, particularly with regard to fuel life cycle management, but this method omits important stages in the life cycle, particularly the ones regarding important circular economy guidelines such as reduction of natural resource consumption, impact on human health, etc. The LCA method provides a much broader approach to environmental assessment than WTW. LCA takes into consideration environmental impact in the whole life cycle of the vehicle, from the stage of production, through the period of exploitation, and finally its disposal.

Developing self-cleaning and air purifying transportation infrastructure components to minimize environmental impact of transportation.

Science.gov (United States)

2013-10-01

Creating transportation infrastructure, which can clean up itself and contaminated air surrounding it, can be a : groundbreaking approach in addressing environmental challenges of our time. This project has explored a possibility of : depositing coat...

Modeling runoff and microbial overland transport with KINEROS2/STWIR model: Accuracy and uncertainty as affected by source of infiltration parameters

Science.gov (United States)

Infiltration is important to modeling the overland transport of microorganisms in environmental waters. In watershed- and hillslope scale-models, infiltration is commonly described by simple equations relating infiltration rate to soil saturated conductivity and by empirical para...

Psychosocial and environmental correlates of active and passive transport behaviors in college educated and non-college educated working young adults.

Science.gov (United States)

Simons, Dorien; De Bourdeaudhuij, Ilse; Clarys, Peter; De Cocker, Katrien; de Geus, Bas; Vandelanotte, Corneel; Van Cauwenberg, Jelle; Deforche, Benedicte

2017-01-01

This study aimed to examine potential differences in walking, cycling, public transport and passive transport (car/moped/motorcycle) to work and to other destinations between college and non-college educated working young adults. Secondly, we aimed to investigate which psychosocial and environmental factors are associated with the four transport modes and whether these associations differ between college and non-college educated working young adults. In this cross-sectional study, 224 working young adults completed an online questionnaire assessing socio-demographic variables (8 items), psychosocial variables (6 items), environmental variables (10 items) and transport mode (4 types) and duration to work/other destinations. Zero-inflated negative binomial regression models were performed in R. A trend (pyoung adults participated in cycling and public transport. However, another trend indicated that cycle time and public transport trips were longer and passive transport trips were shorter in non-college compared to college educated working young adults. In all working young adults, high self-efficacy towards active transport, and high perceived benefits and low perceived barriers towards active and public transport were related to more active and public transport. High social support/norm/modeling towards active, public and passive transport was related to more active, public and passive transport. High neighborhood walkability was related to more walking and less passive transport. Only in non-college educated working young adults, feeling safe from traffic and crime in their neighborhood was related to more active and public transport and less passive transport. Educational levels should be taken into account when promoting healthy transport behaviors in working young adults. Among non-college educated working young adults, focus should be on increasing active and public transport participation and on increasing neighborhood safety to increase active and public

Modelling public transport route choice with multiple access and egress modes

NARCIS (Netherlands)

Brands, Ties; de Romph, E.; Veitch, T.; Cook, J.

2013-01-01

The current traffic system faces well known problems like congestion, environmental impact and use of public space. Public transport (PT) is an important mode to alleviate these problems. To be able to assess the effects of policy measures properly, it is important to model the behaviour of the

Modelling Public Transport Route Choice, with Multiple Access and Egress Modes

NARCIS (Netherlands)

Brands, T.; De Romph, E.; Veitch, T.; Cook, J.

2014-01-01

Public transport (PT) is important, because the current traffic system faces well known problems like congestion, environmental impact and use of public space. To be able to assess the effects of policy measures properly, it is necessary to model the behavior of the (PT) traveler in a realistic way.

Analyzing the environmental impact of transportation in reengineered supply chains: a case study from a leather upholstery company

NARCIS (Netherlands)

Yazan, Devrim Murat; Yazan, Devrim; Petruzzelli, Antonio Messeni; Albino, Vito

2011-01-01

This paper examines the impact of process disaggregation and specialization on the environmental performance of the supply chain of a leather upholstery company. An enterprise input–output model that relates geographical information with production processes and transportation routes is developed.

THE ASSESSMENT MODELS OF AIR POLLUTION DURING TRANSPORTATION OF BULK CARGO

Directory of Open Access Journals (Sweden)

M. M. Biliaiev

2016-10-01

Full Text Available Purpose. The scientific work is concentrated on development of 3D, 2D numerical models for the prediction of atmospheric pollution during transport of bulk cargo in the railway car. Methodology. To solve this problem numerical models were developed, based on the use of the motion equations of inviscid incompressible fluid and mass transfer, to determine the field of wind velocity near the cars and dispersion of dust in the atmosphere. For the numerical integration of the pollutant transport equation implicit alternating-triangular difference scheme was used. When constructing a difference scheme splitting of the transport equation is carried out that allows us to construct an efficient algorithm for solving a differential problem. Unknown value of the pollutant concentration at every step of splitting is determined by the explicit scheme – the method of point-to-point computation, which provides a simple numerical implementation of splitting equations. For numerical integration of the 3D equation for the velocity potential method of Richardson is applied. For numerical integration of the 2D equation for the velocity potential the method of total approximation is applied. The developed numerical models are the basis of established software package. On the basis of the constructed numerical models a computational experiment to assess the level of air pollution when demolition of coal dust from the gondola car was carried out. Findings. 3D, 2D numerical models that belong to the class «diagnostic models» were developed. These models take into account the main physical factors affecting the process of dust pollution dispersion in the atmosphere during transportation of bulk cargo, but require small costs of the computer time in the practice at the low and medium power machines. These models are used for serial calculations of various situations of scenarios related to issues of environmental protection and pollution intensity diagnostics for

International comparisons of energy and environmental efficiency in the road transport sector

International Nuclear Information System (INIS)

Ben Abdallah, Khaled; Belloumi, Mounir; De Wolf, Daniel

2015-01-01

The present work provides an international comparison of the energy intensity and the carbon dioxide intensity in road transport for a group of 90 countries over the period 1980–2012. This paper attempts to perform a comparative analysis to find the most appropriate mapping of the energy performance in road transport taking into account the three dimensions of sustainable energy development, namely road transport-related energy consumption, economic growth and carbon dioxide emissions. An important result of the study is the inverse relationship between energy efficiency and environmental efficiency. Through the calculated Theil coefficient, our empirical findings highlight the existence of spatial and temporal disparities between countries. In 2012, Tunisia occupies the 48th and the 38th rank respectively in terms of energy and environmental efficiency. Based on a general index of energy performance in the road transport sector, it is deemed to have a medium–high energy performance by occupying the 34th rank. The study shows the importance of enhancing a number of policies for the road transport system through the joint improvement of the fuel price policy, of the road infrastructure policy and of the fuel-efficient road vehicles policy, in order to maintain sustainable energy road transport. - Highlights: • The paper presents an international comparative analysis of the energy performance. • The road transport is analyzed for a group of 90 countries over the period 1980–2012. • There is no convergence between energy and environmental efficiencies. • Tunisia has a medium-high energy performance by occupying the 34th rank in 2012. • The findings show the importance of enhancing some policies for the road transport.

Probabilistic transport models for fusion

International Nuclear Information System (INIS)

Milligen, B.Ph. van; Carreras, B.A.; Lynch, V.E.; Sanchez, R.

2005-01-01

A generalization of diffusive (Fickian) transport is considered, in which particle motion is described by probability distributions. We design a simple model that includes a critical mechanism to switch between two transport channels, and show that it exhibits various interesting characteristics, suggesting that the ideas of probabilistic transport might provide a framework for the description of a range of unusual transport phenomena observed in fusion plasmas. The model produces power degradation and profile consistency, as well as a scaling of the confinement time with system size reminiscent of the gyro-Bohm/Bohm scalings observed in fusion plasmas, and rapid propagation of disturbances. In the present work we show how this model may also produce on-axis peaking of the profiles with off-axis fuelling. It is important to note that the fluid limit of a simple model like this, characterized by two transport channels, does not correspond to the usual (Fickian) transport models commonly used for modelling transport in fusion plasmas, and behaves in a fundamentally different way. (author)

48 CFR 970.5223-6 - Executive Order 13423, Strengthening Federal Environmental, Energy, and Transportation Management.

Science.gov (United States)

2010-10-01

..., Strengthening Federal Environmental, Energy, and Transportation Management. 970.5223-6 Section 970.5223-6... FEDERAL ENVIRONMENTAL, ENERGY, AND TRANSPORTATION MANAGEMENT (OCT 2010) Since this contract involves... MANAGEMENT AND OPERATING CONTRACTS Solicitation Provisions and Contract Clauses for Management and Operating...

Use of MODIS Satellite Images and an Atmospheric Dust Transport Model To Evaluate Juniperus spp. Pollen Phenology and Dispersal

Science.gov (United States)

Luvall, J. C.; Sprigg, W. A.; Levetin, Estelle; Huete, Alfredo; Nickovic, S.; Pejanovic, G. A.; Vukovic, A.; VandeWater, P. K.; Myers, O. B.; Budge, A. M.;

Sustainability for road infrastructure : transportation responds to environmental challenges

Science.gov (United States)

2010-12-01

Safety was, until very recently, the prime : guiding criterion of road transport development. : Environmental impacts enjoyed scant regard, being : seen as a necessary evil if life and commerce were to : go on. A few, more progressive regional and na...

Transport interests and environmental regimes. The Baltic Sea transit of Russian oil exports

International Nuclear Information System (INIS)

Knudsen, Olav F.

2010-01-01

In the environmentally exposed Baltic Sea, a prolonged confrontation has set the transport interests of Russian crude oil against environmental interests, promoted by Russia's neighbours. During the 1990s all the Baltic littoral states - including Russia - collaborated well on marine environmental issues. When Russian oil exports accelerated after 1999, this environmental understanding broke down. Russian interests shifted as its oil income suddenly rose drastically. The confrontation peaked over a proposal to make the entire Baltic Sea into a particularly sensitive sea area (PSSA) under the International Maritime Organization (IMO). The proposal was adopted by the IMO in spite of Russian objections. The article shows how environmental interests trump transport interests in a manner that may not be sustainable. The case illustrates the need for environmental collaboration to be flexible in the face of shifting constellations of competing interests. (author)

A vadose zone Transport Processes Investigation within the glacial till at the Fernald Environmental Management Project

International Nuclear Information System (INIS)

Schwing, J.; Roepke, Craig Senninger; Brainard, James Robert; Glass, Robert John Jr.; Mann, Michael J.A.; Holt, Robert M..; Kriel, Kelly

2007-01-01

This report describes a model Transport Processes Investigation (TPI) where field-scale vadose zone flow and transport processes are identified and verified through a systematic field investigation at a contaminated DOE site. The objective of the TPI is to help with formulating accurate conceptual models and aid in implementing rational and cost effective site specific characterization strategies at contaminated sites with diverse hydrogeologic settings. Central to the TPI are Transport Processes Characterization (TPC) tests that incorporate field surveys and large-scale infiltration experiments. Hypotheses are formulated based on observed pedogenic and hydrogeologic features as well as information provided by literature searches. The field and literature information is then used to optimize the design of one or more infiltration experiments to field test the hypothesis. Findings from the field surveys and infiltration experiments are then synthesized to formulate accurate flow and transport conceptual models. Here we document a TPI implemented in the glacial till vadose zone at the Fernald Environmental Management Project (FEMP) in Fernald, Ohio, a US Department of Energy (DOE) uranium processing site. As a result of this TPI, the flow and transport mechanisms were identified through visualization of dye stain within extensive macro pore and fracture networks which provided the means for the infiltrate to bypass potential aquatards. Such mechanisms are not addressed in current vadose zone modeling and are generally missed by classical characterization methods

Environmentally Sustainable Transport: Implementation and Impacts for the Netherlands for 2030

NARCIS (Netherlands)

Geurs KT; Wee GP van; LAE

2000-01-01

This report describes the Dutch transport scenarios for the OECD project on Environmental Sustainable Transport (EST). The EST project contains a business-as-usual scenario (BAU) and three EST scenarios which attain the EST criteria (i.e. a reduction of CO2 by 80%, NOx by 90%, VOC by 90%, PM10 by

Modeling of the residue transport of lambda cyhalothrin, cypermethrin, malathion and endosulfan in three different environmental compartments in the Philippines

OpenAIRE

Senoro, Delia B.; Maravillas, Sharon L.; Ghafari, Nima; Rivera, Clarissa C.; Quiambao, Erwin C.; Lorenzo, Maria Carmina M.

2016-01-01

This study aims to determine the environmental transport and fate of the residue of four Philippines priority chemicals; i.e., lambda cyhalothrin (L-cyhalothrin), cypermethrin, endosulfan and malathion, in three different environmental compartments (air, water and soil). In the Philippines, pesticide application is the most common method of controlling pests and weeds in rice and vegetable farming. This practice aided the agricultural industry to minimize losses and increase yield. However, i...

Transportation, economical development and environmental considerations in the Arctic areas

International Nuclear Information System (INIS)

Berg, J.S.

1993-01-01

There is a need for increased development in Arctic regions for obtaining resources such as hydrocarbons and ores. Development of these resources in remote areas requires suitable transportation routes and proper attention to the environmental sensitivity of northern lands. Developing a transport route must take into account such matters as resource location, economic feasibility, type of material to be transported, length of time the route will be needed, the interest of the route to tourism, and the effect of transport on the environment. Design, construction, and maintenance of the transport route requires collection of reliable data and conformity to specifications relevant to the region concerned. Construction and maintenance in northern areas is affected by such complicated and costly factors as the short construction season, long distances for transportation of both equipment and workers, presence of permafrost, and low winter temperatures. 6 figs

Chemical Transformation System: Cloud Based Cheminformatic Services to Support Integrated Environmental Modeling

Science.gov (United States)

Integrated Environmental Modeling (IEM) systems that account for the fate/transport of organics frequently require physicochemical properties as well as transformation products. A myriad of chemical property databases exist but these can be difficult to access and often do not co...

The Capacity to Integrate and Deal with Environmental Issues in Local Transport Policy and Planning

DEFF Research Database (Denmark)

Hansen, Carsten Jahn

2002-01-01

The article identifies and discuss the capacity to integrate and deal with environmental issues in local transport policy-making and planning processes.......The article identifies and discuss the capacity to integrate and deal with environmental issues in local transport policy-making and planning processes....

Modelling of transport phenomena

International Nuclear Information System (INIS)

Itoh, Kimitaka; Itoh, Sanae; Fukuyama, Atsushi.

1993-09-01

In this review article, we discuss key features of the transport phenomena and theoretical modelling to understand them. Experimental observations have revealed the nature of anomalous transport, i.e., the enhancement of the transport coefficients by the gradients of the plasma profiles, the pinch phenomena, the radial profile of the anomalous transport coefficients, the variation of the transport among the Bohm diffusion, Pseudo-classical confinement, L-mode and variety of improved confinement modes, and the sudden jumps such as L-H transition. Starting from the formalism of the transport matrix, the modelling based on the low frequency instabilities are reviewed. Theoretical results in the range of drift wave frequency are examined. Problems in theories based on the quasilinear and mixing-length estimates lead to the renewal of the turbulence theory, and the physics picture of the self-sustained turbulence is discussed. The theory of transport using the fluid equation of plasma is developed, showing that the new approach is very promising in explaining abovementioned characteristics of anomalous transport in both L-mode and improved confinement plasmas. The interference of the fluxes is the key to construct the physics basis of the bifurcation theory for the L-H transition. The present status of theories on the mechanisms of improved confinement is discussed. Modelling on the nonlocal nature of transport is briefly discussed. Finally, the impact of the anomalous transport on disruptive phenomena is also described. (author) 95 refs

Modelling of Electrokinetic Processes in Civil and Environmental Engineering Applications

DEFF Research Database (Denmark)

Paz-Garcia, Juan Manuel; Johannesson, Björn; Ottosen, Lisbeth M.

2011-01-01

conditions are assumed between the aqueous species and the solid matrix for a set of feasible chemical equilibrium reactions defined for each specific application. A module for re-establishing the chemical equilibrium has been developed and included in the system for this purpose. Changes in the porosity......A mathematical model for the electrokinetic phenomena is described. Numerical simulations of different applications of electrokinetic techniques to the fields of civil and environmental engineering are included, showing the versatility and consistency of the model. The electrokinetics phenomena......-Nernst-Planck system of equations, accounting for ionic migration, chemical diffusion and advection is used for modeling the transport process. The advection term contributor is studied by including in the system the water transport through the porous media, mainly due to electroosmosis. The pore solution filling...

Assessment of the environmental impact of plutonium transport within the European Community

International Nuclear Information System (INIS)

1978-11-01

Assessment is given of the environmental impact of plutonium transport within the European Community in the 1990's. This includes shipments of plutonium, raw materials, fresh and spent mixed oxide fuel assemblies and plutonium contaminated solid wastes. The consequences on general traffic, the radiation doses to transport workers and the general public and the heat release during transport are presented

Modeling study of solute transport in the unsaturated zone. Information and data sets. Volume 1

International Nuclear Information System (INIS)

Polzer, W.L.; Fuentes, H.R.; Springer, E.P.; Nyhan, J.W.

1986-05-01

The Environmental Science Group (HSE-12) is conducting a study to compare various approaches of modeling water and solute transport in porous media. Various groups representing different approaches will model a common set of transport data so that the state of the art in modeling and field experimentation can be discussed in a positive framework with an assessment of current capabilities and future needs in this area of research. This paper provides information and sets of data that will be useful to the modelers in meeting the objectives of the modeling study. The information and data sets include: (1) a description of the experimental design and methods used in obtaining solute transport data, (2) supporting data that may be useful in modeling the data set of interest, and (3) the data set to be modeled

Emissions and Fuel Consumption Modeling for Evaluating Environmental Effectiveness of ITS Strategies

Directory of Open Access Journals (Sweden)

Yuan-yuan Song

2013-01-01

Full Text Available Road transportation is a major fuel consumer and greenhouse gas emitter. Recently, the intelligent transportation systems (ITSs technologies, which can improve traffic flow and safety, have been developed to reduce the fuel consumption and vehicle emissions. Emission and fuel consumption estimation models play a key role in the evaluation of ITS technologies. Based on the influence analysis of driving parameters on vehicle emissions, this paper establishes a set of mesoscopic vehicle emission and fuel consumption models using the real-world vehicle operation and emission data. The results demonstrate that these models are more appropriate to evaluate the environmental effectiveness of ITS strategies with enough estimation accuracy.

Marine radionuclide transport in the northern North Atlantic estimated with an eddy-permitting ocean model - Marine radionuclide transport in the Northern North Atlantic estimated with an Eddy-resolving ocean model

Energy Technology Data Exchange (ETDEWEB)

Simonsen, Magne [Norwegian Meteorological institute, P.O. Box 43 Blindern, N-0313 Oslo (Norway); Norwegian University of Life Sciences, P.O. Box 5003, N-1432 Aas (Norway); Isachsen, Paal E.; Saetra, Oeyvind; Klein, Heiko; Bartnicki, Jerzy [Norwegian Meteorological institute, P.O. Box 43 Blindern, N-0313 Oslo (Norway); Salbu, Brit; Lind, Ole C. [Norwegian University of Life Sciences, P.O. Box 5003, N-1432 Aas (Norway)

2014-07-01

As a part of the Norwegian Centre for Environmental Radioactivity (CERAD), we have studied transport of radionuclides in the Nordic Seas using an eddy-resolving ocean model. Transport and dispersion is estimated by both Lagrangian (particle) and Eulerian (tracer) methods using currents generated by the Regional Ocean Model System (ROMS) at 4 km horizontal resolution. This relatively high resolution gives a more accurate description of the impact of macro-turbulent advection on transport paths and transport times than achieved in previous studies. The experiments cover historical discharges from the Sellafield reprocessing plant as well as hypothetical accident scenarios from power plants in Great Britain. For the historical Sellafield discharges, model calculations are compared to isotope concentrations observed along the Norwegian Coast and in the Barents Sea. For the accident scenarios, the likely impact on the Norwegian coastal zone is studied considering three different sources for the ocean: direct local discharge, far-field deposition from the atmosphere, and discharge via Norwegian rivers (via atmospheric deposition over land). (authors)

Environmental effects associated with the transportation of radioactive material

International Nuclear Information System (INIS)

McClure, J.D.; Pope, R.B.; Yoshimura, H.R.

1979-01-01

The primary aim of this paper has been to describe some of the background information concerning nuclear materials transportation systems, accident statistics, accident severities, and test information - all of which when combined yield an environmental statement of the risks associated with the transportation of radioactive materials. The results of the ultimate risk analysis are expressed in terms of numbers of fatalities and, in that sense at least, tend to be an absolute measure of risk. When these risks are compared with other accepted societal risks, the relative risks associated with radioactive material transportation can be established. This information can be used to make decisions at the governmental level and to inform an interested public about these risks. It can be concluded that the risks associated with the transportation of radioactive material are low relative to the other risks that society has already accepted

Impact of Environmental Issues on the High-Speed Civil Transport

Science.gov (United States)

Whitehead, Allen H., Jr.

1998-01-01

This paper provides an overview of the impact of environmental issues on the design and operation of the proposed High-Speed Civil Transport (HSCT). This proposal for a new generation commercial supersonic transport is being pursued by NASA and its US industry partners in the NASA High-Speed Research (HSR) Program. A second related paper describes the overall HSR Program, including a history of supersonic transport development that led to the present program, and a brief outline of the structure of the two-phase program and its management structure. The specific objectives are to address the four major barrier environmental issues and show their impact on the design of the airplane and potentially, its mode of operation. A brief historical perspective shows how HSR Phase I addressed these environmental topics and, with the successful completion of that program, led to the successful advocacy for the Phase II effort that followed. The Phase II program elements were discussed in the earlier paper and addressed technology programs to enhance the economic viability of the HSCT. Since many of the regulations that may effect the certification and operation of the HSCT are either not in place or well documented, a brief treatise is provided to address the status of the rules and the potential impact on the viability of the HSCT.

Investigating Environmentally Sustainable Transport Based on DALY weights and SIR Method

Directory of Open Access Journals (Sweden)

Hossein Nezamianpour Jahromi

2012-09-01

Full Text Available Accessibility is one of the main causes of well-being and growth in contemporary societies. Transportation is the backbone of accessibility systems that lead to the growth of economic and social networks and spatial dispersion of activities. Unfortunately, the adverse effects of transportation have a great impact on the natural and human environment. Since transportation is associated with fossil fuel combustion, it results in emissions of pollutants that cause damage to human health. To save the global eco-system, sustainable development has become an international priority. To deal with the sustainability of transportation systems is an important issue as testified by a growing number of initiatives framed to define and measure sustainability in transportation planning and infrastructure planning as well. The capability of environmental assessment as a sustainability instrument is well known. This study proposes a new approach to rank countries based on environmental sustainability development applying disability adjusted life year (DALY weights for transportation sector emissions. DALY weights consider actual impacts of pollutants on human health. By employing SIR method, a superiority and inferiority ranking method is presented for multiple criteria decision making, the sustainability ranking of a number of European countries is presented. Three various ranking methods extracted from SIR ranking method are discussed and the results and the correlation among them are demonstrated.

The innovation inducement impact of environmental regulations on maritime transport

DEFF Research Database (Denmark)

Makkonen, Teemu; Repka, Sari

2016-01-01

, contrasting views, arguing that environmental regulations will, in fact, enhance firms’ competitiveness by inducing innovation, have also been voiced. Here this issue is examined through a literature review on the innovation inducement impact of environmental regulations (i.e. the Porter Hypothesis......), in general, and the economic impacts of environmental regulations (here Annex VI of the MARPOL Convention) as it applies to shipping in Northern Europe, in particular. According to the review, the literature is still inconclusive and lacks a clear consensus on the economic and innovation inducement impacts......Maritime transport is facing wide-ranking challenges due to stricter environmental regulations. It has been positioned that these stricter environmental regulations will significantly hamper the competitiveness of the shipping industry and other export/import oriented industries. However...

Stochastic models of intracellular transport

KAUST Repository

Bressloff, Paul C.

2013-01-09

The interior of a living cell is a crowded, heterogenuous, fluctuating environment. Hence, a major challenge in modeling intracellular transport is to analyze stochastic processes within complex environments. Broadly speaking, there are two basic mechanisms for intracellular transport: passive diffusion and motor-driven active transport. Diffusive transport can be formulated in terms of the motion of an overdamped Brownian particle. On the other hand, active transport requires chemical energy, usually in the form of adenosine triphosphate hydrolysis, and can be direction specific, allowing biomolecules to be transported long distances; this is particularly important in neurons due to their complex geometry. In this review a wide range of analytical methods and models of intracellular transport is presented. In the case of diffusive transport, narrow escape problems, diffusion to a small target, confined and single-file diffusion, homogenization theory, and fractional diffusion are considered. In the case of active transport, Brownian ratchets, random walk models, exclusion processes, random intermittent search processes, quasi-steady-state reduction methods, and mean-field approximations are considered. Applications include receptor trafficking, axonal transport, membrane diffusion, nuclear transport, protein-DNA interactions, virus trafficking, and the self-organization of subcellular structures. © 2013 American Physical Society.

Transport, energy and environment

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-01

Transportation demands a large and increasing share of total energy consumption in Europe. At the same time many European countries are facing difficult decisions in achieving their long term environmental goals. Therefore energy policy, environmental policy and transport policy should be seen and discussed in a common perspective. In particular the relative contribution from the transport sector and the energy sector involves a number of important and difficult issues. The aim of the conference was to bring together economists, scientists, manufactures, energy planners, transport planners, and decision makers in order to discuss the importance of the transport sector in relation to energy demand and long term environmental goals. General conference sessions covered. Trends in Transport Energy Demand and Environmental constraints, Technological Development and New Transport Systems, Lifestyle Changes and the Transport Sector, Megacities: Solutions to the Transport and Air Pollution Problems, Effectiveness of Public Policies, Transport and Energy sector, and Methods, Models and Data. The conference took place at Hotel Marienlyst, Elsinore, Denmark and attracted wide interest. The participants represented 14 different countries covering international organisations, ministries, universities, research centres, consulting firms, industry etc. (EG)

Indicator system for the environmental assessment of energy transport systems

International Nuclear Information System (INIS)

Knoepfel, I.

1995-01-01

The aim of this dissertation is to define a consistent set of indicators for the environmental assessment of different energy transport systems: high-voltage alternating and direct current transmission lines, electric cables, pipelines for gas and oil, inland waterway, road and rail transportation, according to state-of-the-art technologies. The indicator system is used for comparative analysis and identification of environmental hot-spots of the different systems. The environmental performance of power plants close to production or unloading terminals with subsequent power transmission and the transport of fossil fuels with power production close to the end-users is compared. Quantitative indicators are defined for different impact categories: fossil energy depletion, impacts from emissions, land use, noise impacts and visibility. A further aggregation of the different indicators to obtain a universal environmental score was not envisaged. It was not possible to define a quantitative indicator for possible electric and magnetic field effects because of insufficient knowledge of the involved dose-response metrics. The proposed indicators quantify dose-response relationships also below emission or immission limits imposed by law, which was one of the main requirements in this work. By reducing all information to an equivalent impacted area, a high level of consistency was achieved for land use, noise impacts and visibility indicators. Other indicators refer to the energy content of fossil resources and to equivalent emissions of reference substances. The calculation of an equivalent impacted area was not considered an efficient approach in these cases. The performance of the proposed indicator system and its applicability to infrastructure and regional planning is tested in two practical examples. (author) figs., tabs., refs

Prediction of overall persistence and long-range transport potential with multimedia fate models: robustness and sensitivity of results

International Nuclear Information System (INIS)

Fenner, Kathrin; Scheringer, Martin; Hungerbuehler, Konrad

2004-01-01

The hazard indicators persistence (P) and long-range transport potential (LRTP) are used in chemicals assessment to characterize chemicals with regard to the temporal and spatial extent of their environmental exposure. They are often calculated based on the results of multimedia fate models. The environmental and substance-specific input parameters of such models are subject to a range of methodological uncertainties and also influenced by natural variability. We employed probabilistic uncertainty analysis to quantify variance in P and LRTP predictions for chemicals with different partitioning and transport behavior. Variance found in the results is so large that it prevents a clear distinction between chemicals. Additionally, only small improvements are observed when evaluating the results relative to a benchmark chemical. This can be explained by the dominance of substance-specific parameters and the only small direct influence of environmental parameters on P and LRTP as model outcomes. The findings underline the importance of learning how environmental conditions cause variability in substance behavior for improved substance ranking and classification. - Environmental conditions cause variability in substance behavior which need to be considered in chemical ranking schemes

Polycyclic aromatic hydrocarbons - fate and long-range atmospheric transport studied using a global model, EMAC-SVOC

Science.gov (United States)

Octaviani, Mega; Tost, Holger; Lammel, Gerhard

2017-04-01

Polycyclic aromatic hydrocarbons (PAHs) are emitted by incomplete combustion from fossil fuel, vehicles, and biomass burning. They may persist in environmental compartments, pose a health hazard and may bio accumulate along food chains. The ECHAM/MESSy Atmospheric Chemistry (EMAC) model had been used to simulate global tropospheric, stratospheric chemistry and climate. In this study, we improve the model to include simulations of the transport and fate of semi-volatile organic compounds (SVOC). The EMAC-SVOC model takes into account essential environmental processes including gas-particle partitioning, dry and wet deposition, chemical and bio-degradation, and volatilization from sea surface, soils, vegetation, and snow. The model was evaluated against observational data in the Arctic, mid-latitudes, and tropics, and further applied to study total environmental lifetime and long-range transport potential (LRTP) of PAHs. We selected four compounds for study, spanning a wide range of volatility, i.e., phenanthrene, fluoranthene, pyrene, and benzo[a]pyrene. Several LRTP indicators were investigated, including the Arctic contamination potential, meridional spreading, and zonal and meridional fluxes to remote regions.

Strategic environmental assessment for local transport plans; Strategische Umweltpruefung in der kommunalen Verkehrsentwicklung

Energy Technology Data Exchange (ETDEWEB)

Conrad, Vera

2008-08-15

The strategic environmental assessment (SEA) makes new demands for plans and programs also in the transport sector. Particularly on local level transport is one of the biggest causers of negative environmental effects. But there exists no SEA obligation for local transport plans, however many factors suggest to make such an examination in this sector. At the latest in the urban land use planning transport effects are a component for the SEA. Synergies can be exhausted and the individual planning steps are appropriately co-ordinated by the meaningful integration of transport and urban development planning. Additional synergies can gained in connection with further local and/or regional planning like e.g. the clean air planning or noise reduction planning. The aim of the doctoral thesis is to draft recommendations how to integrate the SEA into local transport planning process. For that purpose it is necessary to deduce the requirements demanded by the SEA and to demonstrate the current state of the local transport planning. The doctoral thesis is based on partial results of the research project FE 73.0237 ''Strategische Umweltpruefung in der kommunalen Verkehrsentwicklungsplanung'' in behalf of the German Ministry of Transport (Bundesministerium fuer Verkehr, Bauen und Stadtentwicklung) and mentored by the Federal Office of civil engineering (Bundesamt fuer Bauwesen und Raumordnung). The author of this thesis was instrumental in acquiring those results. The thesis contains a detailed literature research. The SEA's requirements are also described as well as the current state of the local transport planning. The state of the SEA on the different planning levels in the German transport sector is presented. Another part is a survey of 13 municipalities concerning their previous practice of the local transport and environmental planning as well as their experience with the SEA on local level and the analyse of local data. Furthermore three

Atrazine transport within a coastal zone in Southeastern Puerto Rico: a sensitivity analysis of an agricultural field model and riparian zone management model

Science.gov (United States)

Water quality models are used to predict effects of conservation practices to mitigate the transport of herbicides to water bodies. We used two models - the Agricultural Policy/Environmental eXtender (APEX) and the Riparian Ecosystem Management Model (REMM) to predict the movement of atrazine from ...

Female non-smokers' environmental tobacco smoking exposure by public transportation mode.

Science.gov (United States)

Kim, Seyoung; Park, Jin-Soo; Park, Minkyu; Kim, Yeji; Lim, Sinye; Lee, Hye-Eun

2018-01-01

This study aimed to analyze environmental tobacco smoking exposure in female nonsmokers by public transportation mode using representative data of Koreans. Data from the Second Korean National Environmental Health Survey (2012-2014) were analyzed. Urine cotinine was analyzed by public transport behavior, secondhand smoke exposure, socioeconomic factors, and health-related factors. Participants were 1322 adult females; those with the top 75% urine cotinine concentrations were assigned to the high exposure group. A logistic regression analysis was performed considering appropriate weights and stratification according to the sample design of the Second Korean National Environmental Health Survey. The geometric mean of urine cotinine concentrations differed according to public transportation modes: subway (1.66 μg/g creatinine) bus (1.77 μg/g creatinine), and taxi (1.94 μg/g creatinine). The odds ratio [OR] was calculated for the high exposure group. The OR of the taxi (2.39; 95% confidence interval, 1.00-5.69) was statistically significantly higher than the subway value (reference), and marginally significant after adjusted with life style, sociodemographic factors and involuntary smoking frequency (2.42, 95% confidence interval, 0.97-6.04). The odds ratio of passengers who mainly used taxis was marginally significantly higher than those of passengers who used subways and buses after adjusted with life style and sociodemographic factors. Implementation of supplementary measures and further studies on exposure to environmental tobacco smoking in taxis are warranted.

Critical environmental factors for transportation cycling in children: a qualitative study using bike-along interviews.

Science.gov (United States)

Ghekiere, Ariane; Van Cauwenberg, Jelle; de Geus, Bas; Clarys, Peter; Cardon, Greet; Salmon, Jo; De Bourdeaudhuij, Ilse; Deforche, Benedicte

2014-01-01

Environmental factors are found to influence transport-related physical activity, but have rarely been studied in relation with cycling for transport to various destinations in 10-12 yr old children. The current qualitative study used 'bike-along interviews' with children and parents to allow discussion of detailed environmental factors that may influence children's cycling for transport, while cycling in the participant's neighborhood. Purposeful convenience sampling was used to recruit 35 children and one of their parents residing in (semi-) urban areas. Bike-along interviews were conducted to and from a randomly chosen destination (e.g. library) within a 15 minutes' cycle trip in the participant's neighborhood. Participants wore a GoPro camera to objectively assess environmental elements, which were subsequently discussed with participants. Content analysis and arising themes were derived using a grounded theory approach. The discussed environmental factors were categorized under traffic, urban design, cycling facilities, road design, facilities at destination, aesthetics, topography, weather, social control, stranger danger and familiar environment. Across these categories many environmental factors were (in)directly linked to road safety. This was illustrated by detailed discussions of the children's visibility, familiarity with specific traffic situations, and degree of separation, width and legibility of cycle facilities. Road safety is of major concern in this 10-12 yr old study population. Bike-along interviews were able to identify new, detailed and context-specific physical environmental factors which could inform policy makers to promote children's cycling for transport. However, future studies should investigate whether hypothetical changes to such micro environmental features influence perceptions of safety and if this in turn could lead to changes in children's cycling for transport.

Critical environmental factors for transportation cycling in children: a qualitative study using bike-along interviews.

Directory of Open Access Journals (Sweden)

Ariane Ghekiere

Full Text Available Environmental factors are found to influence transport-related physical activity, but have rarely been studied in relation with cycling for transport to various destinations in 10-12 yr old children. The current qualitative study used 'bike-along interviews' with children and parents to allow discussion of detailed environmental factors that may influence children's cycling for transport, while cycling in the participant's neighborhood.Purposeful convenience sampling was used to recruit 35 children and one of their parents residing in (semi- urban areas. Bike-along interviews were conducted to and from a randomly chosen destination (e.g. library within a 15 minutes' cycle trip in the participant's neighborhood. Participants wore a GoPro camera to objectively assess environmental elements, which were subsequently discussed with participants. Content analysis and arising themes were derived using a grounded theory approach.The discussed environmental factors were categorized under traffic, urban design, cycling facilities, road design, facilities at destination, aesthetics, topography, weather, social control, stranger danger and familiar environment. Across these categories many environmental factors were (indirectly linked to road safety. This was illustrated by detailed discussions of the children's visibility, familiarity with specific traffic situations, and degree of separation, width and legibility of cycle facilities.Road safety is of major concern in this 10-12 yr old study population. Bike-along interviews were able to identify new, detailed and context-specific physical environmental factors which could inform policy makers to promote children's cycling for transport. However, future studies should investigate whether hypothetical changes to such micro environmental features influence perceptions of safety and if this in turn could lead to changes in children's cycling for transport.

The Environmental Impact of Flooding on Transportation Land Use ...

African Journals Online (AJOL)

Environmental problems of flooding on transportation land use manifest as a result of different land use activities of man to earn his living and his livelihood. Natural surfaces were replaced by more impermeable roads and concrete which have very low infiltration capacity, which have hydrological consequences of resulting ...

Transport spatial model for the definition of green routes for city logistics centers

Energy Technology Data Exchange (ETDEWEB)

Pamučar, Dragan, E-mail: dpamucar@gmail.com [University of Defence in Belgrade, Department of Logistics, Pavla Jurisica Sturma 33, 11000 Belgrade (Serbia); Gigović, Ljubomir, E-mail: gigoviclj@gmail.com [University of Defence in Belgrade, Department of Mathematics, Pavla Jurisica Sturma 33, 11000 Belgrade (Serbia); Ćirović, Goran, E-mail: cirovic@sezampro.rs [College of Civil Engineering and Geodesy, The Belgrade University, Hajduk Stankova 2, 11000 Belgrade (Serbia); Regodić, Miodrag, E-mail: mregodic62@gmail.com [University of Defence in Belgrade, Department of Mathematics, Pavla Jurisica Sturma 33, 11000 Belgrade (Serbia)

2016-01-15

This paper presents a transport spatial decision support model (TSDSM) for carrying out the optimization of green routes for city logistics centers. The TSDSM model is based on the integration of the multi-criteria method of Weighted Linear Combination (WLC) and the modified Dijkstra algorithm within a geographic information system (GIS). The GIS is used for processing spatial data. The proposed model makes it possible to plan routes for green vehicles and maximize the positive effects on the environment, which can be seen in the reduction of harmful gas emissions and an increase in the air quality in highly populated areas. The scheduling of delivery vehicles is given as a problem of optimization in terms of the parameters of: the environment, health, use of space and logistics operating costs. Each of these input parameters was thoroughly examined and broken down in the GIS into criteria which further describe them. The model presented here takes into account the fact that logistics operators have a limited number of environmentally friendly (green) vehicles available. The TSDSM was tested on a network of roads with 127 links for the delivery of goods from the city logistics center to the user. The model supports any number of available environmentally friendly or environmentally unfriendly vehicles consistent with the size of the network and the transportation requirements. - Highlights: • Model for routing light delivery vehicles in urban areas. • Optimization of green routes for city logistics centers. • The proposed model maximizes the positive effects on the environment. • The model was tested on a real network.

Transport spatial model for the definition of green routes for city logistics centers

International Nuclear Information System (INIS)

Pamučar, Dragan; Gigović, Ljubomir; Ćirović, Goran; Regodić, Miodrag

2016-01-01

This paper presents a transport spatial decision support model (TSDSM) for carrying out the optimization of green routes for city logistics centers. The TSDSM model is based on the integration of the multi-criteria method of Weighted Linear Combination (WLC) and the modified Dijkstra algorithm within a geographic information system (GIS). The GIS is used for processing spatial data. The proposed model makes it possible to plan routes for green vehicles and maximize the positive effects on the environment, which can be seen in the reduction of harmful gas emissions and an increase in the air quality in highly populated areas. The scheduling of delivery vehicles is given as a problem of optimization in terms of the parameters of: the environment, health, use of space and logistics operating costs. Each of these input parameters was thoroughly examined and broken down in the GIS into criteria which further describe them. The model presented here takes into account the fact that logistics operators have a limited number of environmentally friendly (green) vehicles available. The TSDSM was tested on a network of roads with 127 links for the delivery of goods from the city logistics center to the user. The model supports any number of available environmentally friendly or environmentally unfriendly vehicles consistent with the size of the network and the transportation requirements. - Highlights: • Model for routing light delivery vehicles in urban areas. • Optimization of green routes for city logistics centers. • The proposed model maximizes the positive effects on the environment. • The model was tested on a real network.

Interactive 4D Visualization of Sediment Transport Models

Science.gov (United States)

Butkiewicz, T.; Englert, C. M.

2013-12-01

Coastal sediment transport models simulate the effects that waves, currents, and tides have on near-shore bathymetry and features such as beaches and barrier islands. Understanding these dynamic processes is integral to the study of coastline stability, beach erosion, and environmental contamination. Furthermore, analyzing the results of these simulations is a critical task in the design, placement, and engineering of coastal structures such as seawalls, jetties, support pilings for wind turbines, etc. Despite the importance of these models, there is a lack of available visualization software that allows users to explore and perform analysis on these datasets in an intuitive and effective manner. Existing visualization interfaces for these datasets often present only one variable at a time, using two dimensional plan or cross-sectional views. These visual restrictions limit the ability to observe the contents in the proper overall context, both in spatial and multi-dimensional terms. To improve upon these limitations, we use 3D rendering and particle system based illustration techniques to show water column/flow data across all depths simultaneously. We can also encode multiple variables across different perceptual channels (color, texture, motion, etc.) to enrich surfaces with multi-dimensional information. Interactive tools are provided, which can be used to explore the dataset and find regions-of-interest for further investigation. Our visualization package provides an intuitive 4D (3D, time-varying) visualization of sediment transport model output. In addition, we are also integrating real world observations with the simulated data to support analysis of the impact from major sediment transport events. In particular, we have been focusing on the effects of Superstorm Sandy on the Redbird Artificial Reef Site, offshore of Delaware Bay. Based on our pre- and post-storm high-resolution sonar surveys, there has significant scour and bedform migration around the

Source Release Modeling for the Idaho National Engineering and Environmental Laboratory's Subsurface Disposal Area

International Nuclear Information System (INIS)

Becker, B.H.

2002-01-01

A source release model was developed to determine the release of contaminants into the shallow subsurface, as part of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) evaluation at the Idaho National Engineering and Environmental Laboratory's (INEEL) Subsurface Disposal Area (SDA). The output of the source release model is used as input to the subsurface transport and biotic uptake models. The model allowed separating the waste into areas that match the actual disposal units. This allows quantitative evaluation of the relative contribution to the total risk and allows evaluation of selective remediation of the disposal units within the SDA

Evaluation of Parameter Uncertainty Reduction in Groundwater Flow Modeling Using Multiple Environmental Tracers

Science.gov (United States)

Arnold, B. W.; Gardner, P.

2013-12-01

Calibration of groundwater flow models for the purpose of evaluating flow and aquifer heterogeneity typically uses observations of hydraulic head in wells and appropriate boundary conditions. Environmental tracers have a wide variety of decay rates and input signals in recharge, resulting in a potentially broad source of additional information to constrain flow rates and heterogeneity. A numerical study was conducted to evaluate the reduction in uncertainty during model calibration using observations of various environmental tracers and combinations of tracers. A synthetic data set was constructed by simulating steady groundwater flow and transient tracer transport in a high-resolution, 2-D aquifer with heterogeneous permeability and porosity using the PFLOTRAN software code. Data on pressure and tracer concentration were extracted at well locations and then used as observations for automated calibration of a flow and transport model using the pilot point method and the PEST code. Optimization runs were performed to estimate parameter values of permeability at 30 pilot points in the model domain for cases using 42 observations of: 1) pressure, 2) pressure and CFC11 concentrations, 3) pressure and Ar-39 concentrations, and 4) pressure, CFC11, Ar-39, tritium, and He-3 concentrations. Results show significantly lower uncertainty, as indicated by the 95% linear confidence intervals, in permeability values at the pilot points for cases including observations of environmental tracer concentrations. The average linear uncertainty range for permeability at the pilot points using pressure observations alone is 4.6 orders of magnitude, using pressure and CFC11 concentrations is 1.6 orders of magnitude, using pressure and Ar-39 concentrations is 0.9 order of magnitude, and using pressure, CFC11, Ar-39, tritium, and He-3 concentrations is 1.0 order of magnitude. Data on Ar-39 concentrations result in the greatest parameter uncertainty reduction because its half-life of 269

Development of a database system for the calculation of indicators of environmental pressure caused by transport

DEFF Research Database (Denmark)

Giannouli, Myrsini; Samaras, Zissis; Keller, Mario

2006-01-01

The scope of this paper is to summarise a methodology developed for TRENDS (TRansport and ENvironment Database System-TRENDS). The main objective of TRENDS was the calculation of environmental pressure indicators caused by transport. The environmental pressures considered are associated with air...... emissions from the four main transport modes, i.e. road, rail, ships and air. In order to determine these indicators a system for calculating a range of environmental pressures due to transport was developed within a PC-based MS Access environment. Emphasis is given oil the latest features incorporated...... the production of collective results for all transport modes as well as a comparative assessment of air emissions produced by the various modes. Traffic activity and emission data obtained according to a basic (reference) scenario are displayed for the time period 1970-2020. In addition, a detailed assessment...

Environmental and financial implications of ethanol as a bioethylene feedstock versus as a transportation fuel

International Nuclear Information System (INIS)

McKechnie, Jon; Pourbafrani, Mohammad; Saville, Bradley A; MacLean, Heather L

2015-01-01

Bulk chemicals production from biomass may compete with biofuels for low-cost and sustainable biomass sources. Understanding how alternative uses of biomass compare in terms of financial and environmental parameters is therefore necessary to help ensure that efficient uses of resources are encouraged by policy and undertaken by industry. In this paper, we compare the environmental and financial performance of using ethanol as a feedstock for bioethylene production or as a transport fuel in the US life cycle-based models are developed to isolate the relative impacts of these two ethanol uses and generate results that are applicable irrespective of ethanol production pathway. Ethanol use as a feedstock for bioethylene production or as a transport fuel leads to comparable greenhouse gas (GHG) emissions and fossil energy consumption reductions relative to their counterparts produced from fossil sources. By displacing gasoline use in vehicles, use of ethanol as a transport fuel is six times more effective in reducing petroleum energy use on a life cycle basis. In contrast, bioethylene predominately avoids consumption of natural gas. Considering 2013 US ethanol and ethylene market prices, our analysis shows that bioethylene is financially viable only if significant price premiums are realized over conventional ethylene, from 35% to 65% depending on the scale of bioethylene production considered (80 000 t yr −1 to 240 000 t yr −1 ). Ethanol use as a transportation fuel is therefore the preferred pathway considering financial, GHG emissions, and petroleum energy use metrics, although bioethylene production could have strategic value if demand-side limitations of ethanol transport fuel markets are reached. (letter)

Environmental and financial implications of ethanol as a bioethylene feedstock versus as a transportation fuel

Science.gov (United States)

McKechnie, Jon; Pourbafrani, Mohammad; Saville, Bradley A.; MacLean, Heather L.

2015-12-01

Bulk chemicals production from biomass may compete with biofuels for low-cost and sustainable biomass sources. Understanding how alternative uses of biomass compare in terms of financial and environmental parameters is therefore necessary to help ensure that efficient uses of resources are encouraged by policy and undertaken by industry. In this paper, we compare the environmental and financial performance of using ethanol as a feedstock for bioethylene production or as a transport fuel in the US life cycle-based models are developed to isolate the relative impacts of these two ethanol uses and generate results that are applicable irrespective of ethanol production pathway. Ethanol use as a feedstock for bioethylene production or as a transport fuel leads to comparable greenhouse gas (GHG) emissions and fossil energy consumption reductions relative to their counterparts produced from fossil sources. By displacing gasoline use in vehicles, use of ethanol as a transport fuel is six times more effective in reducing petroleum energy use on a life cycle basis. In contrast, bioethylene predominately avoids consumption of natural gas. Considering 2013 US ethanol and ethylene market prices, our analysis shows that bioethylene is financially viable only if significant price premiums are realized over conventional ethylene, from 35% to 65% depending on the scale of bioethylene production considered (80 000 t yr-1 to 240 000 t yr-1). Ethanol use as a transportation fuel is therefore the preferred pathway considering financial, GHG emissions, and petroleum energy use metrics, although bioethylene production could have strategic value if demand-side limitations of ethanol transport fuel markets are reached.

Chemical Transformation System: Cloud Based Cheminformatic Services to Support Integrated Environmental Modeling (proceedings)

Science.gov (United States)

Integrated Environmental Modeling (IEM) systems that account for the fate/transport of organics frequently require physicochemical properties as well as transformation products. A myriad of chemical property databases exist but these can be difficult to access and often do not co...

SATURATED ZONE FLOW AND TRANSPORT MODEL ABSTRACTION

International Nuclear Information System (INIS)

B.W. ARNOLD

2004-01-01

The purpose of the saturated zone (SZ) flow and transport model abstraction task is to provide radionuclide-transport simulation results for use in the total system performance assessment (TSPA) for license application (LA) calculations. This task includes assessment of uncertainty in parameters that pertain to both groundwater flow and radionuclide transport in the models used for this purpose. This model report documents the following: (1) The SZ transport abstraction model, which consists of a set of radionuclide breakthrough curves at the accessible environment for use in the TSPA-LA simulations of radionuclide releases into the biosphere. These radionuclide breakthrough curves contain information on radionuclide-transport times through the SZ. (2) The SZ one-dimensional (I-D) transport model, which is incorporated in the TSPA-LA model to simulate the transport, decay, and ingrowth of radionuclide decay chains in the SZ. (3) The analysis of uncertainty in groundwater-flow and radionuclide-transport input parameters for the SZ transport abstraction model and the SZ 1-D transport model. (4) The analysis of the background concentration of alpha-emitting species in the groundwater of the SZ

Hydrological model for the transport of radioisotope in surface water

International Nuclear Information System (INIS)

Adoboah, E.K.

2011-01-01

The use of radioisotopes has gained grounds in Ghana as a result of the numerous benefits that could be derived from it. In Ghana, radioisotope materials are used for various purposes in a number of institutions. However, improper disposal of the waste poses threat to the environment. To evaluate the environmental impact of radioisotope pollution, mathematical models play a major role in predicting the pollution level in any medium. This study is concerned with the hydrological model for the transport of radioactive material in the river. The model was composed by employing partial differential equations, describing relevant physical processes evolution (water level, velocities and dissolved substances concentrations) that occurs in water bodies. The mass conservation and momentum laws, state equation and state transport equations are equation system basis. The explicit central difference scheme in space and a forward difference method in time were used for the evaluation of the generalized transport equation, the Advection-Dispersion Equation. A Matlab code was developed to predict the concentration of the radioactive contaminant at any particular time along the river and in a reservoir. The model was able to simulate accurately the various levels of radionuclide concentration changes in the flowing rivers as the flows are augmented by tributary inflows. (au)

Savannah River Laboratory environmental transport and effects research. Annual report, 1978

Energy Technology Data Exchange (ETDEWEB)

Crawford, T.V. (comp.)

1979-11-01

Research in the environmental sciences by the Savannah River Laboratory during 1978 is described in 43 articles. These articles are in the fields of terrestrial ecology, geologic studies, aquatic transport, aquatic ecology, atmospheric transport, emergency response, computer methods development, ocean program, and fuel cycle program. Thirty-seven of the articles were abstracted individually for ERA/EDB; those in scope were also included in INIS.

Assessment of the environmental impacts produced by the transport of radioactive materials through urban areas

International Nuclear Information System (INIS)

DuCharme, A.R.; Taylor, J.M.; Tierney, M.S.; Finley, B.H.

1977-01-01

Sandia Laboratories is performing an environmental assessment for the Nuclear Regulatory Commission to ascertain the impacts produced by the transportation of radioactive materials near and through a large, densely populated area. Radiological, nonradiological and economic environmental impacts due to the transportation of all radioactive materials are considered, excepting those related to weapons, weapon components, or shipments on military vehicles. Although New York City is being studied initially to execute the methodology as a function of a real, complex urban environment, the assessment model developed is general in its basic content and is suitable for application to any urban area. Radiological consequences are being computed for cases involving ''normal'' and accident conditions. In the ''normal'' case, nothing unusual takes place, but small radiation doses are still received by nearby people. In the accident case, dispersion of possibly released material away from the accident site is considered. In addition, impacts due to deviations from quality assurance practices, as a result of human error, are being calculated using the assessment model in a special manner. Certain aspects of sabotage and diversion are also being investigated for an urban setting. Radiological consequences are being quantified in terms of human health effects and decontamination costs

A multimedia fate and chemical transport modeling system for pesticides: II. Model evaluation

International Nuclear Information System (INIS)

Li Rong; Yang Fuquan; Sloan, James J; Trevor Scholtz, M

2011-01-01

Pesticides have adverse health effects and can be transported over long distances to contaminate sensitive ecosystems. To address problems caused by environmental pesticides we developed a multimedia multi-pollutant modeling system, and here we present an evaluation of the model by comparing modeled results against measurements. The modeled toxaphene air concentrations for two sites, in Louisiana (LA) and Michigan (MI), are in good agreement with measurements (average concentrations agree to within a factor of 2). Because the residue inventory showed no soil residues at these two sites, resulting in no emissions, the concentrations must be caused by transport; the good agreement between the modeled and measured concentrations suggests that the model simulates atmospheric transport accurately. Compared to the LA and MI sites, the measured air concentrations at two other sites having toxaphene soil residues leading to emissions, in Indiana and Arkansas, showed more pronounced seasonal variability (higher in warmer months); this pattern was also captured by the model. The model-predicted toxaphene concentration fraction on particles (0.5-5%) agrees well with measurement-based estimates (3% or 6%). There is also good agreement between modeled and measured dry (1:1) and wet (within a factor of less than 2) depositions in Lake Ontario. Additionally this study identified erroneous soil residue data around a site in Texas in a published US toxaphene residue inventory, which led to very low modeled air concentrations at this site. Except for the erroneous soil residue data around this site, the good agreement between the modeled and observed results implies that both the US and Mexican toxaphene soil residue inventories are reasonably good. This agreement also suggests that the modeling system is capable of simulating the important physical and chemical processes in the multimedia compartments.

Environmental Satellite Models for a Macroeconomic Model

International Nuclear Information System (INIS)

Moeller, F.; Grinderslev, D.; Werner, M.

2003-01-01

To support national environmental policy, it is desirable to forecast and analyse environmental indicators consistently with economic variables. However, environmental indicators are physical measures linked to physical activities that are not specified in economic models. One way to deal with this is to develop environmental satellite models linked to economic models. The system of models presented gives a frame of reference where emissions of greenhouse gases, acid gases, and leaching of nutrients to the aquatic environment are analysed in line with - and consistently with - macroeconomic variables. This paper gives an overview of the data and the satellite models. Finally, the results of applying the model system to calculate the impacts on emissions and the economy are reviewed in a few illustrative examples. The models have been developed for Denmark; however, most of the environmental data used are from the CORINAIR system implemented in numerous countries

Long-range transport and global fractionation of POPs: insights from multimedia modeling studies

International Nuclear Information System (INIS)

Scheringer, M.; Salzmann, M.; Stroebe, M.; Wegmann, F.; Fenner, K.; Hungerbuehler, K.

2004-01-01

The long-range transport of persistent organic pollutants (POPs) is investigated with two multimedia box models of the global system. ChemRange is a purely evaluative, one-dimensional steady-state (level III) model; CliMoChem is a two-dimensional model with different temperatures, land/water ratios and vegetation types in different latitudinal zones. Model results are presented for three case studies: (i) the effect of atmospheric aerosol particles on the long-range transport of POPs, (ii) the effect of oceanic deposition on the long-range transport of different PCB congeners, (iii) the global fractionation of different PCB congeners. The model results for these case studies show: (i) the low atmospheric half-lives estimated for several organochlorine pesticides are likely to be inconsistent with the observed long-range transport of these compounds; (ii) export to the deep sea reduces the potential for long-range transport of highly hydrophobic compounds (but does not remove these chemicals from the biosphere); (iii) there are different meanings of the term global fractionation that refer to different aspects of the fractionation process and need to be distinguished. The case-study results further indicate that the influences of varying environmental conditions on the physicochemical properties and the degradation rate constants of POPs need to be determined. - Multimedia box models are applied to case studies of the behavior of POPs

Limits of civil and environmental responsibility in transport through pipelines; Limites da responsabilidade civil e ambiental no transporte por dutos

Energy Technology Data Exchange (ETDEWEB)

Leao, Andreia Carneiro [EnviroCompliance Assessoria Ambiental (Brazil); Guilherme Samico, Natalizim Luiz [Webler e Advogados Associados, Macae, RJ (Brazil)

2003-07-01

Throughout the historic evolution of the Brazilian legislation, including a brief analysis of the prevailing laws regarding the subject, this paper provides an ample vision of the civil and environmental liability in transport contracts, and, especially, in the transport of oil and gas through pipelines, discussing the present influence of environmental norms and the New Brazilian Civil Code. And what was brought to a conclusion is, if on one hand were kept the liability of the Sender (user company of the transportation service contracted with the Carrier) and Carrier (personal entity operator of the pipeline system), who respond jointly and regardless of fault for damages to third parties and the environment (extendible also to the owner of the product and to financial institutions that participate in some form in the contract), on the other hand the New Civil Code authorizes the National Petroleum Agency - ANP to rule the liabilities between the parties to the transport contract, providing greater safety to the system operators. (author)

Variability in environmental impacts of Brazilian soybean according to crop production and transport scenarios.

Science.gov (United States)

da Silva, Vamilson Prudêncio; van der Werf, Hayo M G; Spies, Airton; Soares, Sebastião Roberto

2010-09-01

Soybean production and its supply chain are highly dependent on inputs such as land, fertilizer, fuel, machines, pesticides and electricity. The expansion of this crop in Brazil in recent decades has generated concerns about its environmental impacts. To assess these impacts, two representative chains supplying soybeans to Europe were identified: Center West (CW) and Southern (SO) Brazil. Each supply chain was analyzed using Life Cycle Assessment methodology. We considered different levels of use of chemical and organic fertilizers, pesticides and machinery, different distances for transportation of inputs and different yield levels. Because transportation contributed strongly to environmental impacts, a detailed study was performed to identify the routes used to transport soybeans to seaports. Additionally, we considered different levels of land occupation and land transformation to represent the impact of deforestation in the CW region. Environmental impacts were calculated for 1000 kg of soybean up to and including the delivery to Europe at the seaport in Rotterdam, at 13% humidity. Overall results showed that the impacts are greater for CW than for SO for all impact categories studied, including acidification (7.7 and 5.3 kg SO(2) eq., respectively), climate change (959 and 510 kg CO(2) eq.), cumulative energy demand (12,634 and 6,999 MJ) and terrestrial ecotoxicity (4.9 and 3.1 kg 1,4-DCB eq.), except eutrophication and land occupation. The same trend was observed for the crop-production stage. Efforts to reduce chemical fertilizers and diesel consumption can reduce CO(2) emissions. Although deforestation for crop production has decreased in recent years, the contribution of deforestation to climate change and cumulative energy demand remains significant. In the CW scenario deforestation contributed 29% to climate change and 20% to cumulative energy demand. Results also showed that although there are different transportation options in Brazil, the current

Transport properties site descriptive model. Guidelines for evaluation and modelling

International Nuclear Information System (INIS)

Berglund, Sten; Selroos, Jan-Olof

2004-04-01

This report describes a strategy for the development of Transport Properties Site Descriptive Models within the SKB Site Investigation programme. Similar reports have been produced for the other disciplines in the site descriptive modelling (Geology, Hydrogeology, Hydrogeochemistry, Rock mechanics, Thermal properties, and Surface ecosystems). These reports are intended to guide the site descriptive modelling, but also to provide the authorities with an overview of modelling work that will be performed. The site descriptive modelling of transport properties is presented in this report and in the associated 'Strategy for the use of laboratory methods in the site investigations programme for the transport properties of the rock', which describes laboratory measurements and data evaluations. Specifically, the objectives of the present report are to: Present a description that gives an overview of the strategy for developing Site Descriptive Models, and which sets the transport modelling into this general context. Provide a structure for developing Transport Properties Site Descriptive Models that facilitates efficient modelling and comparisons between different sites. Provide guidelines on specific modelling issues where methodological consistency is judged to be of special importance, or where there is no general consensus on the modelling approach. The objectives of the site descriptive modelling process and the resulting Transport Properties Site Descriptive Models are to: Provide transport parameters for Safety Assessment. Describe the geoscientific basis for the transport model, including the qualitative and quantitative data that are of importance for the assessment of uncertainties and confidence in the transport description, and for the understanding of the processes at the sites. Provide transport parameters for use within other discipline-specific programmes. Contribute to the integrated evaluation of the investigated sites. The site descriptive modelling of

Progress in transport modelling of internal transport barrier plasmas in JET

International Nuclear Information System (INIS)

Tala, T.; Bourdelle, C.; Imbeaux, F.; Moreau, D.; Garbet, X.; Joffrin, E.; Laborde, L.; Litaudon, X.; Mazon, D.; Parail, V.; Corrigan, G.; Heading, D.; Crisanti, F.; Mantica, P.; Salmi, A.; Strand, P.; Weiland, J.

2005-01-01

This paper will report on the recent progress in transport modelling of Internal Transport Barrier (ITB) plasmas. Two separate issues will be covered, fully predictive transport modelling of ITBs in the multi-tokamak database, including micro-stability analyses of ITBs, and predictive closed-loop (i.e. real-time control) transport simulations of the q-profile and ITBs. For the first time, the predictive capabilities of the mixed Bohm/GyroBohm and Weiland transport models are investigated with discharges from the ITPA ITB database by fully predictive transport simulations. The predictive transport simulations with the Bohm/GyroBohm model agree very well with experimental results from JET and JT-60U. In order to achieve a good agreement in DIII-D, the stabilisation had to be included into the model, showing the significant role played by the stabilisation in governing the physics of the ITBs. The significant role of the stabilisation is also emphasised by the gyrokinetic analysis. The Weiland transport model shows only limited agreement between the model predictions and experimental results with respect to the formation and location of the ITB. The fully predictive closed-loop simulations with real-time control of the q-profile and ITB show that it is possible to reach various set-point profiles for q and ITB and control them for longer than a current diffusion time in JET using the same real-time control technique as in the experiments. (author)

The potential use of Chernobyl fallout data to test and evaluate the predictions of environmental radiological assessment models

International Nuclear Information System (INIS)

Richmond, C.R.; Hoffman, F.O.; Blaylock, B.G.; Eckerman, K.F.; Lesslie, P.A.; Miller, C.W.; Ng, Y.C.; Till, J.E.

1988-06-01

The objectives of the Model Validation Committee were to collaborate with US and foreign scientists to collect, manage, and evaluate data for identifying critical research issues and data needs to support an integrated assessment of the Chernobyl nuclear accident; test environmental transport, human dosimetric, and health effects models against measured data to determine their efficacy in guiding decisions on protective actions and in estimating exposures to populations and individuals following a nuclear accident; and apply Chernobyl data to quantifications of key processes governing the environmental transport, fate and effects of radionuclides and other trace substances. 55 refs

Hybrid LCA model for assessing the embodied environmental impacts of buildings in South Korea

International Nuclear Information System (INIS)

Jang, Minho; Hong, Taehoon; Ji, Changyoon

2015-01-01

The assessment of the embodied environmental impacts of buildings can help decision-makers plan environment-friendly buildings and reduce environmental impacts. For a more comprehensive assessment of the embodied environmental impacts of buildings, a hybrid life cycle assessment model was developed in this study. The developed model can assess the embodied environmental impacts (global warming, ozone layer depletion, acidification, eutrophication, photochemical ozone creation, abiotic depletion, and human toxicity) generated directly and indirectly in the material manufacturing, transportation, and construction phases. To demonstrate the application and validity of the developed model, the environmental impacts of an elementary school building were assessed using the developed model and compared with the results of a previous model used in a case study. The embodied environmental impacts from the previous model were lower than those from the developed model by 4.6–25.2%. Particularly, human toxicity potential (13 kg C 6 H 6 eq.) calculated by the previous model was much lower (1965 kg C 6 H 6 eq.) than what was calculated by the developed model. The results indicated that the developed model can quantify the embodied environmental impacts of buildings more comprehensively, and can be used by decision-makers as a tool for selecting environment-friendly buildings. - Highlights: • The model was developed to assess the embodied environmental impacts of buildings. • The model evaluates GWP, ODP, AP, EP, POCP, ADP, and HTP as environmental impacts. • The model presents more comprehensive results than the previous model by 4.6–100%. • The model can present the HTP of buildings, which the previous models cannot do. • Decision-makers can use the model for selecting environment-friendly buildings

An economic analysis of transportation fuel policies in Brazil: Fuel choice, land use, and environmental impacts

International Nuclear Information System (INIS)

Nuñez, Hector M.; Önal, Hayri

2016-01-01

Brazil uses taxes, subsidies, and blending mandates as policy instruments to manage and stabilize its transportation fuel markets. The fuel sector has been very dynamic in recent years due to frequent policy adjustments and variable market conditions. In this paper, we use a price endogenous economic simulation model to analyze the impacts of such policy adjustments under various challenging conditions in the global ethanol and sugar markets. Our analysis specifically focuses on Brazilian producers' supply responses, consumers' driving demand and fuel choice, ethanol trade, land use, greenhouse gas emissions, and social welfare. The model results show that (i) under a low ethanol blending rate, conventional vehicles would be driven significantly less while flex-fuel and ethanol-dedicated vehicles would not be affected significantly; (ii) lowering the fuel taxes adversely affects the competitiveness of sugarcane ethanol against gasoline blends, thus lowering producers' surplus; and (iii) while a reduction in fuel taxes is advantageous in terms of overall social welfare, it has serious environmental impacts by increasing the GHG emissions from transportation fuels consumed in Brazil. - Highlights: • We examine the economic and environmental impacts of Brazilian fuel policies. • We also analyze impacts under different sugar and ethanol markets conditions. • Lowering blending rate reduces distance driven by conventional cars. • Lowering fuel tax rates affects competitiveness of ethanol against gasoline blend. • Reducing fuel tax rates has dramatic environmental impacts by increasing emissions.

Transport modelling for ergodic configurations

International Nuclear Information System (INIS)

Runov, A.; Kasilov, S.V.; McTaggart, N.; Schneider, R.; Bonnin, X.; Zagorski, R.; Reiter, D.

2004-01-01

The effect of ergodization, either by additional coils like in TEXTOR-dynamic ergodic divertor (DED) or by intrinsic plasma effects like in W7-X, defines the need for transport models that are able to describe the ergodic configuration properly. A prerequisite for this is the concept of local magnetic coordinates allowing a correct discretization with minimized numerical errors. For these coordinates the appropriate full metric tensor has to be known. To study the transport in complex edge geometries (in particular for W7-X) two possible methods are used. First, a finite-difference discretization of the transport equations on a custom-tailored grid in local magnetic coordinates is used. This grid is generated by field-line tracing to guarantee an exact discretization of the dominant parallel transport (thus also minimizing the numerical diffusion problem). The perpendicular fluxes are then interpolated in a plane (a toroidal cut), where the interpolation problem for a quasi-isotropic system has to be solved by a constrained Delaunay triangulation (keeping the structural information for magnetic surfaces if they exist) and discretization. All toroidal terms are discretized by finite differences. Second, a Monte Carlo transport model originally developed for the modelling of the DED configuration of TEXTOR is used. A generalization and extension of this model was necessary to be able to handle W7-X. The model solves the transport equations with Monte Carlo techniques making use of mappings of local magnetic coordinates. The application of this technique to W7-X in a limiter-like configuration is presented. The decreasing dominance of parallel transport with respect to radial transport for electron heat, ion heat and particle transport results in increasingly steep profiles for the respective quantities within the islands. (author)

Source to sink transport and regulation by environmental factors

Directory of Open Access Journals (Sweden)

Remi eLemoine

2013-07-01

Full Text Available Source-to-sink transport of sugar is one of the major determinants of plant growth and relies on the efficient and controlled distribution of sucrose (and some other sugars such as raffinose and polyols across plant organs through the phloem. However, sugar transport through the phloem can be affected by many environmental factors that alter source/sink relationships. In this paper, we summarize current knowledge about the phloem transport mechanisms and review the effects of several abiotic (water and salt stress, mineral deficiency, CO2, light, temperature, air and soil pollutants and biotic (mutualistic and pathogenic microbes, viruses, aphids and parasitic plants factors. Concerning abiotic constraints, alteration of the distribution of sugar among sinks is often reported, with some sinks as roots favoured in case of mineral deficiency. Many of these constraints impair the transport function of the phloem but the exact mechanisms are far from being completely known. Phloem integrity can be disrupted (e.g. by callose deposition and under certain conditions, phloem transport is affected, earlier than photosynthesis. Photosynthesis inhibition could result from the increase in sugar concentration due to phloem transport decrease. Biotic interactions (aphids, fungi, viruses… also affect crop plant productivity. Recent breakthroughs have identified some of the sugar transporters involved in these interactions on the host and pathogen sides. The different data are discussed in relation to the phloem transport pathways. When possible, the link with current knowledge on the pathways at the molecular level will be highlighted.

Including Health in Environmental Assessments of Major Transport Infrastructure Projects: A Documentary Analysis.

Science.gov (United States)

Riley, Emily; Harris, Patrick; Kent, Jennifer; Sainsbury, Peter; Lane, Anna; Baum, Fran

2018-05-10

Transport policy and practice impacts health. Environmental Impact Assessments (EIAs) are regulated public policy mechanisms that can be used to consider the health impacts of major transport projects before they are approved. The way health is considered in these environmental assessments (EAs) is not well known. This research asked: How and to what extent was human health considered in EAs of four major transport projects in Australia. We developed a comprehensive coding framework to analyse the Environmental Impact Statements (EISs) of four transport infrastructure projects: three road and one light rail. The coding framework was designed to capture how health was directly and indirectly included. We found that health was partially considered in all four EISs. In the three New South Wales (NSW) projects, but not the one South Australian project, this was influenced by the requirements issued to proponents by the government which directed the content of the EIS. Health was assessed using human health risk assessment (HHRA). We found this to be narrow in focus and revealed a need for a broader social determinants of health approach, using multiple methods. The road assessments emphasised air quality and noise risks, concluding these were minimal or predicted to improve. The South Australian project was the only road project not to include health data explicitly. The light rail EIS considered the health benefits of the project whereas the others focused on risk. Only one project considered mental health, although in less detail than air quality or noise. Our findings suggest EIAs lag behind the known evidence linking transport infrastructure to health. If health is to be comprehensively included, a more complete model of health is required, as well as a shift away from health risk assessment as the main method used. This needs to be mandatory for all significant developments. We also found that considering health only at the EIA stage may be a significant

Modeling the impact of transport energy consumption on CO2 emission in Pakistan: Evidence from ARDL approach.

Science.gov (United States)

Danish; Baloch, Muhammad Awais; Suad, Shah

2018-04-01

The objective of this research is to examine the relationship between transport energy consumption, economic growth, and carbon dioxide emission (CO 2 ) from transport sector incorporating foreign direct investment and urbanization. This study is carried out in Pakistan by applying autoregressive distributive lag (ARDL) and vector error correction model (VECM) over 1990-2015. The empirical results indicate a strong significant impact of transport energy consumption on CO 2 emissions from the transportation sector. Furthermore, foreign direct investment also contributes to CO 2 emission. Interestingly, the impact of economic growth and urbanization on transport CO 2 emission is statistically insignificant. Overall, transport energy consumption and foreign direct investment are not environmentally friendly. The new empirical evidence from this study provides a complete picture of the determinants of emissions from the transport sector and these novel findings not only help to advance the existing literature but also can be of special interest to the country's policymakers. So, we urge that government needs to focus on promoting the energy efficient means of transportation to improve environmental quality with less adverse influence on economic growth.

Conceptual model for regional radionuclide transport from a salt dome repository: a technical memorandum

International Nuclear Information System (INIS)

Kier, R.S.; Showalter, P.A.; Dettinger, M.D.

1980-01-01

Disposal of high-level radioactive wastes is a major environmental problem influencing further development of nuclear energy in this country. Salt domes in the Gulf Coast Basin are being investigated as repository sites. A major concern is geologic and hydrologic stability of candidate domes and potential transport of radionuclides by groundwater to the biosphere prior to their degradation to harmless levels of activity. This report conceptualizes a regional geohydrologic model for transport of radionuclides from a salt dome repository. The model considers transport pathways and the physical and chemical changes that would occur through time prior to the radionuclides reaching the biosphere. Necessary, but unknown inputs to the regional model involve entry and movement of fluids through the repository dome and across the dome-country rock interface and the effect on the dome and surrounding strata of heat generated by the radioactive wastes

The social drivers of conservation : social capital, environmental concern and transportation.

Science.gov (United States)

2013-06-01

What kinds of personal ties to organizations, community and family would be most strongly : associated with pro-environmental behavior, especially within the realm of transportation? : What role do participation in community activities and organizati...

Selection of organic chemicals for subsurface transport. Subsurface transport program interaction seminar series. Summary

International Nuclear Information System (INIS)

Zachara, J.M.; Wobber, F.J.

1984-11-01

Model compounds are finding increasing use in environmental research. These individual compounds are selected as surrogates of important contaminants present in energy/defense wastes and their leachates and are used separately or as mixtures in research to define the anticipated or ''model'' environmental behavior of key waste components and to probe important physicochemical mechanisms involved in transport and fate. A seminar was held in Germantown, Maryland, April 24-25, 1984 to discuss the nature of model organic compounds being used for subsurface transport research. The seminar included participants experienced in the fields of environmental chemistry, microbiology, geohydrology, biology, and analytic chemistry. The objectives of the seminar were two-fold: (1) to review the rationale for the selection of organic compounds adopted by research groups working on the subsurface transport of organics, and (2) to evaluate the use of individual compounds to bracket the behavior of compound classes and compound constructs to approximate the behavior of complex organic mixtures

Application of environmental isotopes to validate a model of regional groundwater flow and transport (Carrizo Aquifer)

International Nuclear Information System (INIS)

Pearson, F.J.

1999-01-01

It is asserted that models cannot be validated. This seems obvious if one identifies validation as the process of testing a model against absolute truth, and accepts that absolute truth is less a scientific than a philosophic or religious concept. What is here called model validation has a more modest goal - to develop confidence in the conceptual and mathematical models used to describe a groundwater system by illustrating that measured radiochemical properties of the groundwater match those predicted by the model. The system described is the Carrizo sand in the Gulf Coastal Plain of south Texas. Each element of the modelling chain describing the movement of 14 C is confirmed independently and, thus, can be said to be validated. The groundwater ages, and the 14 C measurements and carbonate geochemical model underlying them, are confirmed by the noble gas measurements, while the flow and transport model is confirmed by the 14 C results. Agreement between the modelled and measured 234 U/ 238 U ratios supports the description of U transport used in the modelling, while the need to use an unexpectedly low K D value for U raises questions about the applicability of laboratory K D data to the Carrizo groundwater system. (author)

Electronic transport in VO2—Experimentally calibrated Boltzmann transport modeling

International Nuclear Information System (INIS)

Kinaci, Alper; Rosenmann, Daniel; Chan, Maria K. Y.; Kado, Motohisa; Ling, Chen; Zhu, Gaohua; Banerjee, Debasish

2015-01-01

Materials that undergo metal-insulator transitions (MITs) are under intense study, because the transition is scientifically fascinating and technologically promising for various applications. Among these materials, VO 2 has served as a prototype due to its favorable transition temperature. While the physical underpinnings of the transition have been heavily investigated experimentally and computationally, quantitative modeling of electronic transport in the two phases has yet to be undertaken. In this work, we establish a density-functional-theory (DFT)-based approach with Hubbard U correction (DFT + U) to model electronic transport properties in VO 2 in the semiconducting and metallic regimes, focusing on band transport using the Boltzmann transport equations. We synthesized high quality VO 2 films and measured the transport quantities across the transition, in order to calibrate the free parameters in the model. We find that the experimental calibration of the Hubbard correction term can efficiently and adequately model the metallic and semiconducting phases, allowing for further computational design of MIT materials for desirable transport properties

Biological transportation networks: Modeling and simulation

KAUST Repository

Albi, Giacomo

2015-09-15

We present a model for biological network formation originally introduced by Cai and Hu [Adaptation and optimization of biological transport networks, Phys. Rev. Lett. 111 (2013) 138701]. The modeling of fluid transportation (e.g., leaf venation and angiogenesis) and ion transportation networks (e.g., neural networks) is explained in detail and basic analytical features like the gradient flow structure of the fluid transportation network model and the impact of the model parameters on the geometry and topology of network formation are analyzed. We also present a numerical finite-element based discretization scheme and discuss sample cases of network formation simulations.

Non-Fickian dispersive transport of strontium in laboratory-scale columns: Modelling and evaluation

Science.gov (United States)

Liu, Dongxu; Jivkov, Andrey P.; Wang, Lichun; Si, Gaohua; Yu, Jing

2017-06-01

In the context of environmental remediation of contaminated sites and safety assessment of nuclear waste disposal in the near-surface zone, we investigate the leaching and non-Fickian dispersive migration with sorption of strontium (mocking strontium-90) through columns packed with sand and clay. Analysis is based on breakthrough curves (BTCs) from column experiments, which simulated rainfall infiltration and source term release scenario, rather than applying constant tracer solution at the inlet as commonly used. BTCs are re-evaluated and transport parameters are estimated by inverse modelling using two approaches: (1) equilibrium advection-dispersion equation (ADE); and (2) continuous time random walk (CTRW). Firstly, based on a method for calculating leach concentration, the inlet condition with an exponential decay input is identified. Secondly, the results show that approximately 39%-58% of Br- and 16%-49% of Sr2+ are eluted from the columns at the end of the breakthrough experiments. This suggests that trapping mechanisms, including diffusion into immobile zones and attachment of tracer on mineral surfaces, are more pronounced for Sr2+ than for Br-. Thirdly, we demonstrate robustness of CTRW-based truncated power-law (TPL) model in capturing non-Fickian reactive transport with 0 2. The non-Fickian dispersion observed experimentally is explained by variations of local flow field from preferential flow paths due to physical heterogeneities. Particularly, the additional sorption process of strontium on clay minerals contributes to the delay of the peak concentration and the tailing features, which leads to an enhanced non-Fickian transport for strontium. Finally, the ADE and CTRW approaches to environmental modelling are evaluated. It is shown that CTRW with a sorption term can describe non-Fickian dispersive transport of strontium at laboratory scale by identifying appropriate parameters, while the traditional ADE with a retardation factor fails to reproduce

Macro-economic environmental models

International Nuclear Information System (INIS)

Wier, M.

1993-01-01

In the present report, an introduction to macro-economic environmental models is given. The role of the models as a tool for policy analysis is discussed. Future applications, as well as the limitations given by the data, are brought into focus. The economic-ecological system is described. A set of guidelines for implementation of the system in a traditional economic macro-model is proposed. The characteristics of empirical national and international environmental macro-economic models so far are highlighted. Special attention is paid to main economic causalities and their consequences for the environmental policy recommendations sat by the models. (au) (41 refs.)

Baseline requirements of the proposed action for the Transportation Management Division routing models

International Nuclear Information System (INIS)

Johnson, P.E.; Joy, D.S.

1995-02-01

The potential impacts associated with the transportation of hazardous materials are important to shippers, carriers, and the general public. This is particularly true for shipments of radioactive material. The shippers are primarily concerned with safety, security, efficiency, and equipment requirements. The carriers are concerned with the potential impact that radioactive shipments may have on their operations--particularly if such materials are involved in an accident. The general public has also expressed concerns regarding the safety of transporting radioactive and other hazardous materials through their communities. Because transportation routes are a central concern in hazardous material transport, the prediction of likely routes is the first step toward resolution of these issues. In response to these routing needs, several models have been developed over the past fifteen years at Oak Ridge National Laboratory (ORNL). The HIGHWAY routing model is used to predict routes for truck transportation, the INTERLINE routing model is used to predict both rail and barge routes, and the AIRPORT locator model is used to determine airports with specified criteria near a specific location. As part of the ongoing improvement of the US Department of Energy's (DOE) Environmental Management Transportation Management Division's (EM-261) computer systems and development efforts, a Baseline Requirements Assessment Session on the HIGHWAY, INTERLINE, and AIRPORT models was held at ORNL on April 27, 1994. The purpose of this meeting was to discuss the existing capabilities of the models and data bases and to review enhancements of the models and data bases to expand their usefulness. The results of the Baseline Requirements Assessment Section will be discussed in this report. The discussions pertaining to the different models are contained in separate sections

Modeling coupled nanoparticle aggregation and transport in porous media: a Lagrangian approach.

Science.gov (United States)

Taghavy, Amir; Pennell, Kurt D; Abriola, Linda M

2015-01-01

Changes in nanoparticle size and shape due to particle-particle interactions (i.e., aggregation or agglomeration) may significantly alter particle mobility and retention in porous media. To date, however, few modeling studies have considered the coupling of transport and particle aggregation processes. The majority of particle transport models employ an Eulerian modeling framework and are, consequently, limited in the types of collisions and aggregate sizes that can be considered. In this work, a more general Lagrangian modeling framework is developed and implemented to explore coupled nanoparticle aggregation and transport processes. The model was verified through comparison of model simulations to published results of an experimental and Eulerian modeling study (Raychoudhury et al., 2012) of carboxymethyl cellulose (CMC)-modified nano-sized zero-valent iron particle (nZVI) transport and retention in water-saturated sand columns. A model sensitivity analysis reveals the influence of influent particle concentration (ca. 70 to 700 mg/L), primary particle size (10-100 nm) and pore water velocity (ca. 1-6 m/day) on particle-particle, and, consequently, particle-collector interactions. Model simulations demonstrate that, when environmental conditions promote particle-particle interactions, neglecting aggregation effects can lead to under- or over-estimation of nanoparticle mobility. Results also suggest that the extent to which higher order particle-particle collisions influence aggregation kinetics will increase with the fraction of primary particles. This work demonstrates the potential importance of time-dependent aggregation processes on nanoparticle mobility and provides a numerical model capable of capturing/describing these interactions in water-saturated porous media. Copyright © 2014 Elsevier B.V. All rights reserved.

Research and technology strategy to help overcome the environmental problems in relation to transport. Resource uses study

International Nuclear Information System (INIS)

Billings, R.; Crowley, J.; Moran, R.

1992-04-01

This report concerns the environmental impact of resource utilization in the transport sector. The first phase of the study involved a dissection of transport into its different modes, its operational components, and its existing patterns of resource usage. The second phase was an investigation of existing environmental impacts. Since in principle a significant environmental impact may occur anywhere along the extraction-to-disposal life cycle of a material, it was necessary to investigate a range of environmental phenomena upstream and downstream from the transport sector, as well as within the sector itself. In this development of a holistic perspective of resource usage, particular attention was paid to depletion, disposal, and re-cycling questions. The third phase involved the examination of possible innovations in transport technology. Of particular interest was the resource usage implications of these innovations, and their potential for ameliorating negative environmental impacts. In the final phase of the study, are addressed questions of the net costs and benefits of the various technologies, and of the most appropriate policy options for the Community

Physical modelling and testing in environmental geotechnics

Energy Technology Data Exchange (ETDEWEB)

Garnier, J.; Thorel, L.; Haza, E. [Laboratoire Central des Ponts et Chaussees a Nantes, 44 - Nantes (France)

2000-07-01

The preservation of natural environment has become a major concern, which affects nowadays a wide range of professionals from local communities administrators to natural resources managers (water, wildlife, flora, etc) and, in the end, to the consumers that we all are. Although totally ignored some fifty years ago, environmental geotechnics has become an emergent area of study and research which borders on the traditional domains, with which the geo-technicians are confronted (soil and rock mechanics, engineering geology, natural and anthropogenic risk management). Dedicated to experimental approaches (in-situ investigations and tests, laboratory tests, small-scale model testing), the Symposium fits in with the geotechnical domains of environment and transport of soil pollutants. These proceedings report some progress of developments in measurement techniques and studies of transport of pollutants in saturated and unsaturated soils in order to improve our understanding of such phenomena within multiphase environments. Experimental investigations on decontamination and isolation methods for polluted soils are discussed. The intention is to assess the impact of in-situ and laboratory tests, as well as small-scale model testing, on engineering practice. One paper has been analyzed in INIS data base for its specific interest in nuclear industry.

Interaction of environmental contaminants with zebrafish organic anion transporting polypeptide, Oatp1d1 (Slco1d1)

Energy Technology Data Exchange (ETDEWEB)

Popovic, Marta; Zaja, Roko [Laboratory for Molecular Ecotoxicology, Division for Marine and Environmental Research, Rudjer Boskovic Institute, Bijenicka 54, 10 000 Zagreb (Croatia); Fent, Karl [University of Applied Sciences Northwestern Switzerland, School of Life Sciences, Gründenstrasse 40, CH-4132 Muttenz (Switzerland); Swiss Federal Institute of Technology (ETH Zürich), Department of Environmental System Sciences, Institute of Biogeochemistry and Pollution Dynamics, CH-8092 Zürich (Switzerland); Smital, Tvrtko, E-mail: smital@irb.hr [Laboratory for Molecular Ecotoxicology, Division for Marine and Environmental Research, Rudjer Boskovic Institute, Bijenicka 54, 10 000 Zagreb (Croatia)

2014-10-01

Polyspecific transporters from the organic anion transporting polypeptide (OATP/Oatp) superfamily mediate the uptake of a wide range of compounds. In zebrafish, Oatp1d1 transports conjugated steroid hormones and cortisol. It is predominantly expressed in the liver, brain and testes. In this study we have characterized the transport of xenobiotics by the zebrafish Oatp1d1 transporter. We developed a novel assay for assessing Oatp1d1 interactors using the fluorescent probe Lucifer yellow and transient transfection in HEK293 cells. Our data showed that numerous environmental contaminants interact with zebrafish Oatp1d1. Oatp1d1 mediated the transport of diclofenac with very high affinity, followed by high affinity towards perfluorooctanesulfonic acid (PFOS), nonylphenol, gemfibrozil and 17α-ethinylestradiol; moderate affinity towards carbaryl, diazinon and caffeine; and low affinity towards metolachlor. Importantly, many environmental chemicals acted as strong inhibitors of Oatp1d1. A strong inhibition of Oatp1d1 transport activity was found by perfluorooctanoic acid (PFOA), chlorpyrifos-methyl, estrone (E1) and 17β-estradiol (E2), followed by moderate to low inhibition by diethyl phthalate, bisphenol A, 7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4 tetrahydronapthalene and clofibrate. In this study we identified Oatp1d1 as a first Solute Carrier (SLC) transporter involved in the transport of a wide range of xenobiotics in fish. Considering that Oatps in zebrafish have not been characterized before, our work on zebrafish Oatp1d1 offers important new insights on the understanding of uptake processes of environmental contaminants, and contributes to the better characterization of zebrafish as a model species. - Highlights: • We optimized a novel assay for determination of Oatp1d1 interactors • Oatp1d1 is the first SLC characterized fish xenobiotic transporter • PFOS, nonylphenol, diclofenac, EE2, caffeine are high affinity Oatp1d1substrates • PFOA, chlorpyrifos

Interaction of environmental contaminants with zebrafish organic anion transporting polypeptide, Oatp1d1 (Slco1d1)

International Nuclear Information System (INIS)

Popovic, Marta; Zaja, Roko; Fent, Karl; Smital, Tvrtko

2014-01-01

Polyspecific transporters from the organic anion transporting polypeptide (OATP/Oatp) superfamily mediate the uptake of a wide range of compounds. In zebrafish, Oatp1d1 transports conjugated steroid hormones and cortisol. It is predominantly expressed in the liver, brain and testes. In this study we have characterized the transport of xenobiotics by the zebrafish Oatp1d1 transporter. We developed a novel assay for assessing Oatp1d1 interactors using the fluorescent probe Lucifer yellow and transient transfection in HEK293 cells. Our data showed that numerous environmental contaminants interact with zebrafish Oatp1d1. Oatp1d1 mediated the transport of diclofenac with very high affinity, followed by high affinity towards perfluorooctanesulfonic acid (PFOS), nonylphenol, gemfibrozil and 17α-ethinylestradiol; moderate affinity towards carbaryl, diazinon and caffeine; and low affinity towards metolachlor. Importantly, many environmental chemicals acted as strong inhibitors of Oatp1d1. A strong inhibition of Oatp1d1 transport activity was found by perfluorooctanoic acid (PFOA), chlorpyrifos-methyl, estrone (E1) and 17β-estradiol (E2), followed by moderate to low inhibition by diethyl phthalate, bisphenol A, 7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4 tetrahydronapthalene and clofibrate. In this study we identified Oatp1d1 as a first Solute Carrier (SLC) transporter involved in the transport of a wide range of xenobiotics in fish. Considering that Oatps in zebrafish have not been characterized before, our work on zebrafish Oatp1d1 offers important new insights on the understanding of uptake processes of environmental contaminants, and contributes to the better characterization of zebrafish as a model species. - Highlights: • We optimized a novel assay for determination of Oatp1d1 interactors • Oatp1d1 is the first SLC characterized fish xenobiotic transporter • PFOS, nonylphenol, diclofenac, EE2, caffeine are high affinity Oatp1d1substrates • PFOA, chlorpyrifos

Model Comparison for Electron Thermal Transport

Science.gov (United States)

Moses, Gregory; Chenhall, Jeffrey; Cao, Duc; Delettrez, Jacques

2015-11-01

Four electron thermal transport models are compared for their ability to accurately and efficiently model non-local behavior in ICF simulations. Goncharov's transport model has accurately predicted shock timing in implosion simulations but is computationally slow and limited to 1D. The iSNB (implicit Schurtz Nicolai Busquet electron thermal transport method of Cao et al. uses multigroup diffusion to speed up the calculation. Chenhall has expanded upon the iSNB diffusion model to a higher order simplified P3 approximation and a Monte Carlo transport model, to bridge the gap between the iSNB and Goncharov models while maintaining computational efficiency. Comparisons of the above models for several test problems will be presented. This work was supported by Sandia National Laboratory - Albuquerque and the University of Rochester Laboratory for Laser Energetics.

Hybrid LCA model for assessing the embodied environmental impacts of buildings in South Korea

Energy Technology Data Exchange (ETDEWEB)

Jang, Minho, E-mail: minmin40@hanmail.net [Asset Management Division, Mate Plus Co., Ltd., 9th Fl., Financial News Bldg. 24-5 Yeouido-dong, Yeongdeungpo-gu, Seoul, 150-877 (Korea, Republic of); Hong, Taehoon, E-mail: hong7@yonsei.ac.kr [Department of Architectural Engineering, Yonsei University, Seoul, 120-749 (Korea, Republic of); Ji, Changyoon, E-mail: chnagyoon@yonsei.ac.kr [Department of Architectural Engineering, Yonsei University, Seoul, 120-749 (Korea, Republic of)

2015-01-15

The assessment of the embodied environmental impacts of buildings can help decision-makers plan environment-friendly buildings and reduce environmental impacts. For a more comprehensive assessment of the embodied environmental impacts of buildings, a hybrid life cycle assessment model was developed in this study. The developed model can assess the embodied environmental impacts (global warming, ozone layer depletion, acidification, eutrophication, photochemical ozone creation, abiotic depletion, and human toxicity) generated directly and indirectly in the material manufacturing, transportation, and construction phases. To demonstrate the application and validity of the developed model, the environmental impacts of an elementary school building were assessed using the developed model and compared with the results of a previous model used in a case study. The embodied environmental impacts from the previous model were lower than those from the developed model by 4.6–25.2%. Particularly, human toxicity potential (13 kg C{sub 6}H{sub 6} eq.) calculated by the previous model was much lower (1965 kg C{sub 6}H{sub 6} eq.) than what was calculated by the developed model. The results indicated that the developed model can quantify the embodied environmental impacts of buildings more comprehensively, and can be used by decision-makers as a tool for selecting environment-friendly buildings. - Highlights: • The model was developed to assess the embodied environmental impacts of buildings. • The model evaluates GWP, ODP, AP, EP, POCP, ADP, and HTP as environmental impacts. • The model presents more comprehensive results than the previous model by 4.6–100%. • The model can present the HTP of buildings, which the previous models cannot do. • Decision-makers can use the model for selecting environment-friendly buildings.

Radionuclide Transport Models Under Ambient Conditions

International Nuclear Information System (INIS)

Moridis, G.; Hu, Q.

2000-01-01

The purpose of this Analysis/Model Report (AMR) is to evaluate (by means of 2-D semianalytical and 3-D numerical models) the transport of radioactive solutes and colloids in the unsaturated zone (UZ) under ambient conditions from the potential repository horizon to the water table at Yucca Mountain (YM), Nevada. This is in accordance with the ''AMR Development Plan U0060, Radionuclide Transport Models Under Ambient Conditions'' (CRWMS M and O 1999a). This AMR supports the UZ Flow and Transport Process Model Report (PMR). This AMR documents the UZ Radionuclide Transport Model (RTM). This model considers: the transport of radionuclides through fractured tuffs; the effects of changes in the intensity and configuration of fracturing from hydrogeologic unit to unit; colloid transport; physical and retardation processes and the effects of perched water. In this AMR they document the capabilities of the UZ RTM, which can describe flow (saturated and/or unsaturated) and transport, and accounts for (a) advection, (b) molecular diffusion, (c) hydrodynamic dispersion (with full 3-D tensorial representation), (d) kinetic or equilibrium physical and/or chemical sorption (linear, Langmuir, Freundlich or combined), (e) first-order linear chemical reaction, (f) radioactive decay and tracking of daughters, (g) colloid filtration (equilibrium, kinetic or combined), and (h) colloid-assisted solute transport. Simulations of transport of radioactive solutes and colloids (incorporating the processes described above) from the repository horizon to the water table are performed to support model development and support studies for Performance Assessment (PA). The input files for these simulations include transport parameters obtained from other AMRs (i.e., CRWMS M and O 1999d, e, f, g, h; 2000a, b, c, d). When not available, the parameter values used are obtained from the literature. The results of the simulations are used to evaluate the transport of radioactive solutes and colloids, and

Optimal transportation networks models and theory

CERN Document Server

Bernot, Marc; Morel, Jean-Michel

2009-01-01

The transportation problem can be formalized as the problem of finding the optimal way to transport a given measure into another with the same mass. In contrast to the Monge-Kantorovitch problem, recent approaches model the branched structure of such supply networks as minima of an energy functional whose essential feature is to favour wide roads. Such a branched structure is observable in ground transportation networks, in draining and irrigation systems, in electrical power supply systems and in natural counterparts such as blood vessels or the branches of trees. These lectures provide mathematical proof of several existence, structure and regularity properties empirically observed in transportation networks. The link with previous discrete physical models of irrigation and erosion models in geomorphology and with discrete telecommunication and transportation models is discussed. It will be mathematically proven that the majority fit in the simple model sketched in this volume.

In vitro placental model optimization for nanoparticle transport studies

Directory of Open Access Journals (Sweden)

Cartwright L

2012-01-01

Full Text Available Laura Cartwright1, Marie Sønnegaard Poulsen2, Hanne Mørck Nielsen3, Giulio Pojana4, Lisbeth E Knudsen2, Margaret Saunders1, Erik Rytting2,51Bristol Initiative for Research of Child Health (BIRCH, Biophysics Research Unit, St Michael's Hospital, UH Bristol NHS Foundation Trust, Bristol, UK; 2University of Copenhagen, Faculty of Health Sciences, Department of Public Health, 3University of Copenhagen, Faculty of Pharmaceutical Sciences, Department of Pharmaceutics and Analytical Chemistry, Copenhagen, Denmark; 4Department of Environmental Sciences, Informatics and Statistics, University Ca' Foscari Venice, Venice, Italy; 5Department of Obstetrics and Gynecology, University of Texas Medical Branch, Galveston, Texas, USABackground: Advances in biomedical nanotechnology raise hopes in patient populations but may also raise questions regarding biodistribution and biocompatibility, especially during pregnancy. Special consideration must be given to the placenta as a biological barrier because a pregnant woman's exposure to nanoparticles could have significant effects on the fetus developing in the womb. Therefore, the purpose of this study is to optimize an in vitro model for characterizing the transport of nanoparticles across human placental trophoblast cells.Methods: The growth of BeWo (clone b30 human placental choriocarcinoma cells for nanoparticle transport studies was characterized in terms of optimized Transwell® insert type and pore size, the investigation of barrier properties by transmission electron microscopy, tight junction staining, transepithelial electrical resistance, and fluorescein sodium transport. Following the determination of nontoxic concentrations of fluorescent polystyrene nanoparticles, the cellular uptake and transport of 50 nm and 100 nm diameter particles was measured using the in vitro BeWo cell model.Results: Particle size measurements, fluorescence readings, and confocal microscopy indicated both cellular uptake of

Development of a site specific environmental radiation assessment model for Youngkwang NPPs

Energy Technology Data Exchange (ETDEWEB)

Chung, Yang Geun; Song, Myung Jae; Shon, Soon Hwan; Shin, Sang Woon; Lee, Gap Bock; Yang, Kyung Hwa [Korea Electric Power Research Institute, Taejon (Korea, Republic of); Kim, Seong Pyung; Kim, Jeong Kyu; Shin, Dae Yoon; Kim, Hyun Ku; Lee, Kyung Jin [Chosun University, Kwangju (Korea, Republic of)

1996-12-31

During the normal operation of nuclear power plants, a very small amount of radionuclide materials is released to the environment. The radionuclide releases to the environment may give rise to some additional radiation dose through a number of pathways. With a few exception, radionuclide transports are highly dependent on the environmental conditions such as topological features, atmospheric and oceanic conditions and socio-environmental characteristics, etc. The dose calculation in Korea are presently being performed using the models in US NRC Reg. Guide. However, these models which were originally released by the US NRC in 1977 are inadequate to deal with environmental movement of radionuclides in consideration of complex terrain, tidal condition of the Yellow Sea, and Youngkwang site specific conditions. KEPRI has developed the models to consider the site specific characteristics around Youngkwang NPPs, to give the realistic dose assessment, and to improve assurance and reliability in public dose calculation. (author). 41 figs., 70 refs.

Transport Emissions and Energy Consumption Impacts of Private Capital Investment in Public Transport

Directory of Open Access Journals (Sweden)

Yunqiang Xue

2017-10-01

Full Text Available Introducing private capital into the public transport system for its sustainable development has been increasing around the world. However, previous research ignores emissions and energy consumption impacts, which are important for private capital investment policy-making. To address this problem, the system dynamic (SD approach was used to quantitatively analyze the cumulative effects of different private capital investment models in public transport from the environmental perspective. The SD model validity was verified in the case study of Jinan public traffic. Simulation results show that the fuel consumption and emission reductions are obvious when the private capital considering passenger value invests in public transport compared with the no private capital investment and traditional investment models. There are obvious cumulative reductions for fuel consumption, CO2, CO, SO2, and PM10 emissions for 100 months compared with no private capital investment. This research verifies the superiority of the passenger value investment model in public transport from the environmental point of view, and supplies a theoretical tool for administrators to evaluate the private capital investment effects systematically.

On the combination of isotope hydrogeology with regional flow and transport modelling

International Nuclear Information System (INIS)

Barmen, G.A.

1992-01-01

Many different methods and tools can be used when trying to improve the information basis on which decisions are made for maintaining a quantitatively and qualitatively safe, long-term use of groundwater resources. In this thesis, classical hydrogeological examinations, hydrochemical investigations, environmental isotope studies, computerized groundwater flow modelling and radioisotope transport modelling have been applied to the large system of reservoirs in the sedimentary deposits of southwestern Scania, Sweden. The stable isotopes 2 H, 18 O and 13 C and the radioactive 3 H and 14 C have been measured and the results obtained can improve the estimations of the periods of recharge and the average circulation times of the groundwater reservoirs studied. A groundwater flow model based on finite difference techniques and a continuum approach has been modified by data from traditional hydrogeological studies. The computer code, NEWSAM, has been used to simulate steady-state and transient isotope transport in the area studied, taking into account advective transport with radioactive decay. The interacting groundwater resevoirs studied have been represented by a three-dimensional system of grids in the numerical model. A major merit of this combination of isotope hydrogeology and regional flow and transport modelling is that the isotope transport simulations help to demonstrate where zones particularly vulnerable to pollution are situated. These locations are chiefly the results of the hydrogeological characteristics traditionally examined, but they are revealed by means of the transport model. Subsequent, more detailed investigations can then be focussed primarily on these vulnerable zones. High contents of radioisotopes in the main aquifer of southwestern Scania may indicate that groundwater withdrawals have stimulated recharge from shallow aquifers and surface waters and that the risk of pollution has increased. (196 refs.) (au)

Use of MODIS Satellite Images and an Atmospheric Dust Transport Model to Evaluate Juniperus spp. Pollen Phenology and Transport

Science.gov (United States)

Luvall, J. C.; Sprigg, W. A.; Levetin, E.; Huete, A.; Nickovic, S.; Pejanovic, G. A.; Vukovic, A.; Van de Water, P. K.; Myers, O. B.; Budge, A. M.;

Dileptons from transport and hydrodynamical models

International Nuclear Information System (INIS)

Huovinen, P.; Koch, V.

2000-01-01

Transport and hydrodynamical models used to describe the expansion stage of a heavy-ion collision at the CERN SPS give different dilepton spectrum even if they are tuned to reproduce the observed hadron spectra. To understand the origin of this difference we compare the dilepton emission from transport and hydrodynamical models using similar initial states in both models. We find that the requirement of pion number conservation in a hydrodynamical model does not change the dilepton emission. Also the mass distribution from the transport model indicates faster cooling and longer lifetime of the fireball

Assessment of applications of transport models on regional scale solute transport

Science.gov (United States)

Guo, Z.; Fogg, G. E.; Henri, C.; Pauloo, R.

2017-12-01

Regional scale transport models are needed to support the long-term evaluation of groundwater quality and to develop management strategies aiming to prevent serious groundwater degradation. The purpose of this study is to evaluate the capacity of previously-developed upscaling approaches to accurately describe main solute transport processes including the capture of late-time tails under changing boundary conditions. Advective-dispersive contaminant transport in a 3D heterogeneous domain was simulated and used as a reference solution. Equivalent transport under homogeneous flow conditions were then evaluated applying the Multi-Rate Mass Transfer (MRMT) model. The random walk particle tracking method was used for both heterogeneous and homogeneous-MRMT scenarios under steady state and transient conditions. The results indicate that the MRMT model can capture the tails satisfactorily for plume transported with ambient steady-state flow field. However, when boundary conditions change, the mass transfer model calibrated for transport under steady-state conditions cannot accurately reproduce the tailing effect observed for the heterogeneous scenario. The deteriorating impact of transient boundary conditions on the upscaled model is more significant for regions where flow fields are dramatically affected, highlighting the poor applicability of the MRMT approach for complex field settings. Accurately simulating mass in both mobile and immobile zones is critical to represent the transport process under transient flow conditions and will be the future focus of our study.

Modelling the environmental transport of tritium in the vicinity of long term atmospheric and sub-surface sources. Report of the Tritium Working Group of the Biosphere Modelling and Assessment (BIOMASS) Programme, Theme 3

International Nuclear Information System (INIS)

2003-03-01

The IAEA Programme on BIOsphere Modelling and ASSessment (BIOMASS) was launched in Vienna in October 1996. The programme was concerned with developing and improving capabilities to predict the transfer of radionuclides in the environment. The programme had three themes: Theme 1: Radioactive Waste Disposal. The objective was to develop the concept of a standard or reference biosphere for application to the assessment of the long term safety of repositories for radioactive waste. Theme 2: Environmental Releases. BIOMASS provided an international forum for activities aimed at increasing the confidence in methods and models for the assessment of radiation exposure related to environmental releases. Two Working Groups addressed issues concerned with the reconstruction of radiation doses received by people from past releases of radionuclides to the environment and the evaluation of the efficacy of remedial measures. Theme 3: Biosphere Processes. The aim of this Theme was to improve capabilities for modelling the transfer of radionuclides in particular parts of the biosphere identified as being of potential radiological significance and where there were gaps in modelling approaches. This topic was explored using a range of methods including reviews of the literature, model inter-comparison exercises and, where possible, model testing against independent sources of data. Three Working Groups were established to examine the modelling of: (1) long term tritium dispersion in the environment; (2) radionuclide uptake by fruits; and (3) radionuclide migration and accumulation in forest ecosystems. This report describes results of the studies undertaken by the Tritium Working Group under Theme 3. It discusses the six model test exercises (three model-model intercomparisons and three model-data exercises) and the twenty-month field sampling programme undertaken to investigate the environmental transport of tritium in the vicinity of long term atmospheric and sub-surface sources

Mathematical modeling plasma transport in tokamaks

Energy Technology Data Exchange (ETDEWEB)

Quiang, Ji [Univ. of Illinois, Urbana-Champaign, IL (United States)

1997-01-01

In this work, the author applied a systematic calibration, validation and application procedure based on the methodology of mathematical modeling to international thermonuclear experimental reactor (ITER) ignition studies. The multi-mode plasma transport model used here includes a linear combination of drift wave branch and ballooning branch instabilities with two a priori uncertain constants to account for anomalous plasma transport in tokamaks. A Bayesian parameter estimation method is used including experimental calibration error/model offsets and error bar rescaling factors to determine the two uncertain constants in the transport model with quantitative confidence level estimates for the calibrated parameters, which gives two saturation levels of instabilities. This method is first tested using a gyroBohm multi-mode transport model with a pair of DIII-D discharge experimental data, and then applied to calibrating a nominal multi-mode transport model against a broad database using twelve discharges from seven different tokamaks. The calibrated transport model is then validated on five discharges from JT-60 with no adjustable constants. The results are in a good agreement with experimental data. Finally, the resulting class of multi-mode tokamak plasma transport models is applied to the transport analysis of the ignition probability in a next generation machine, ITER. A reference simulation of basic ITER engineering design activity (EDA) parameters shows that a self-sustained thermonuclear burn with 1.5 GW output power can be achieved provided that impurity control makes radiative losses sufficiently small at an average plasma density of 1.2 X 10²⁰/m³ with 50 MW auxiliary heating. The ignition probability of ITER for the EDA parameters, can be formally as high as 99.9% in the present context. The same probability for concept design activity (CDA) parameters of ITER, which has smaller size and lower current, is only 62.6%.

Mathematical modeling plasma transport in tokamaks

International Nuclear Information System (INIS)

Quiang, Ji

1995-01-01

In this work, the author applied a systematic calibration, validation and application procedure based on the methodology of mathematical modeling to international thermonuclear experimental reactor (ITER) ignition studies. The multi-mode plasma transport model used here includes a linear combination of drift wave branch and ballooning branch instabilities with two a priori uncertain constants to account for anomalous plasma transport in tokamaks. A Bayesian parameter estimation method is used including experimental calibration error/model offsets and error bar rescaling factors to determine the two uncertain constants in the transport model with quantitative confidence level estimates for the calibrated parameters, which gives two saturation levels of instabilities. This method is first tested using a gyroBohm multi-mode transport model with a pair of DIII-D discharge experimental data, and then applied to calibrating a nominal multi-mode transport model against a broad database using twelve discharges from seven different tokamaks. The calibrated transport model is then validated on five discharges from JT-60 with no adjustable constants. The results are in a good agreement with experimental data. Finally, the resulting class of multi-mode tokamak plasma transport models is applied to the transport analysis of the ignition probability in a next generation machine, ITER. A reference simulation of basic ITER engineering design activity (EDA) parameters shows that a self-sustained thermonuclear burn with 1.5 GW output power can be achieved provided that impurity control makes radiative losses sufficiently small at an average plasma density of 1.2 X 10 20 /m 3 with 50 MW auxiliary heating. The ignition probability of ITER for the EDA parameters, can be formally as high as 99.9% in the present context. The same probability for concept design activity (CDA) parameters of ITER, which has smaller size and lower current, is only 62.6%

A disaggregate freight transport model of transport chain and shipment size choice

NARCIS (Netherlands)

Windisch, E.; De Jong, G.C.; Van Nes, R.; Hoogendoorn, S.P.

2010-01-01

The field of freight transport modelling is relatively young compared to passenger transport modelling. However, some key issues in freight policy, like growing freight shares on the road, advanced logistics concepts or emerging strict freight transport regulations, have been creating increasing

Model Fusion Tool - the Open Environmental Modelling Platform Concept

Science.gov (United States)

Kessler, H.; Giles, J. R.

2010-12-01

The vision of an Open Environmental Modelling Platform - seamlessly linking geoscience data, concepts and models to aid decision making in times of environmental change. Governments and their executive agencies across the world are facing increasing pressure to make decisions about the management of resources in light of population growth and environmental change. In the UK for example, groundwater is becoming a scarce resource for large parts of its most densely populated areas. At the same time river and groundwater flooding resulting from high rainfall events are increasing in scale and frequency and sea level rise is threatening the defences of coastal cities. There is also a need for affordable housing, improved transport infrastructure and waste disposal as well as sources of renewable energy and sustainable food production. These challenges can only be resolved if solutions are based on sound scientific evidence. Although we have knowledge and understanding of many individual processes in the natural sciences it is clear that a single science discipline is unable to answer the questions and their inter-relationships. Modern science increasingly employs computer models to simulate the natural, economic and human system. Management and planning requires scenario modelling, forecasts and ‘predictions’. Although the outputs are often impressive in terms of apparent accuracy and visualisation, they are inherently not suited to simulate the response to feedbacks from other models of the earth system, such as the impact of human actions. Geological Survey Organisations (GSO) are increasingly employing advances in Information Technology to visualise and improve their understanding of geological systems. Instead of 2 dimensional paper maps and reports many GSOs now produce 3 dimensional geological framework models and groundwater flow models as their standard output. Additionally the British Geological Survey have developed standard routines to link geological

System Convergence in Transport Modelling

DEFF Research Database (Denmark)

Rich, Jeppe; Nielsen, Otto Anker; Cantarella, Guilio E.

2010-01-01

A fundamental premise of most applied transport models is the existence and uniqueness of an equilibrium solution that balances demand x(t) and supply t(x). The demand consists of the people that travel in the transport system and on the defined network, whereas the supply consists of the resulting...... level-of-service attributes (e.g., travel time and cost) offered to travellers. An important source of complexity is the congestion, which causes increasing demand to affect travel time in a non-linear way. Transport models most often involve separate models for traffic assignment and demand modelling...... iterating between a route-choice (demand) model and a time-flow (supply) model. It is generally recognised that a simple iteration scheme where the level-of-service level is fed directly to the route-choice and vice versa may exhibit an unstable pattern and lead to cyclic unstable solutions. It can be shown...

Establishment and application of performance evaluation model for collection and transportation system of municipal solid waste

Institute of Scientific and Technical Information of China (English)

彭绪亚; 林晓东; 贾传兴; 王渝昆; 黄媛媛

2009-01-01

On the basis of analyzing the typical waste collection and transportation mode,the evaluation index system for performance of the waste collection and transportation system was proposed with three grades,which related to six factors,such as economic evaluation,high efficient evaluation,environmental impact assessment,resource evaluation,evaluation of security and emergency,evaluation of management and society. With the performance evaluation theory,the performance evaluation model of waste collection and transportation system was constructed,which quantified the grading standard of index and determined the index weight in analytic hierarchy process (AHP). After evaluating the waste collection and transportation system of the main districts of Chongqing city,the results show that the it has an excellent performance evaluation grade with very high performance level of three indices involving evaluation of management and society,environmental impact assessment,evaluation of security and emergency and quite low performance level of two indices that include high efficient evaluation and economic evaluation.

Modeling pollutant transport using a meshless-lagrangian particle model

International Nuclear Information System (INIS)

Carrington, D.B.; Pepper, D.W.

2002-01-01

A combined meshless-Lagrangian particle transport model is used to predict pollutant transport over irregular terrain. The numerical model for initializing the velocity field is based on a meshless approach utilizing multiquadrics established by Kansa. The Lagrangian particle transport technique uses a random walk procedure to depict the advection and dispersion of pollutants over any type of surface, including street and city canyons

Integrating Norm Activation Model and Theory of Planned Behavior to Understand Sustainable Transport Behavior: Evidence from China.

Science.gov (United States)

Liu, Yuwei; Sheng, Hong; Mundorf, Norbert; Redding, Colleen; Ye, Yinjiao

2017-12-18

With increasing urbanization in China, many cities are facing serious environmental problems due to continuous and substantial increase in automobile transportation. It is becoming imperative to examine effective ways to reduce individual automobile use to facilitate sustainable transportation behavior. Empirical, theory-based research on sustainable transportation in China is limited. In this research, we propose an integrated model based on the norm activation model and the theory of planned behavior by combining normative and rational factors to predict individuals' intention to reduce car use. Data from a survey of 600 car drivers in China's three metropolitan areas was used to test the proposed model and hypotheses. Results showed that three variables, perceived norm of car-transport reduction, attitude towards reduction, and perceived behavior control over car-transport reduction, significantly affected the intention to reduce car-transport. Personal norms mediated the relationship between awareness of consequences of car-transport, ascription of responsibility of car-transport, perceived subjective norm for car-transport reduction, and intention to reduce car-transport. The results of this research not only contribute to theory development in the area of sustainable transportation behavior, but also provide a theoretical frame of reference for relevant policy-makers in urban transport management.

Integrating Norm Activation Model and Theory of Planned Behavior to Understand Sustainable Transport Behavior: Evidence from China

Directory of Open Access Journals (Sweden)

Yuwei Liu

2017-12-01

Full Text Available With increasing urbanization in China, many cities are facing serious environmental problems due to continuous and substantial increase in automobile transportation. It is becoming imperative to examine effective ways to reduce individual automobile use to facilitate sustainable transportation behavior. Empirical, theory-based research on sustainable transportation in China is limited. In this research, we propose an integrated model based on the norm activation model and the theory of planned behavior by combining normative and rational factors to predict individuals’ intention to reduce car use. Data from a survey of 600 car drivers in China’s three metropolitan areas was used to test the proposed model and hypotheses. Results showed that three variables, perceived norm of car-transport reduction, attitude towards reduction, and perceived behavior control over car-transport reduction, significantly affected the intention to reduce car-transport. Personal norms mediated the relationship between awareness of consequences of car-transport, ascription of responsibility of car-transport, perceived subjective norm for car-transport reduction, and intention to reduce car-transport. The results of this research not only contribute to theory development in the area of sustainable transportation behavior, but also provide a theoretical frame of reference for relevant policy-makers in urban transport management.

Uncertainty calculation in transport models and forecasts

DEFF Research Database (Denmark)

Manzo, Stefano; Prato, Carlo Giacomo

Transport projects and policy evaluations are often based on transport model output, i.e. traffic flows and derived effects. However, literature has shown that there is often a considerable difference between forecasted and observed traffic flows. This difference causes misallocation of (public...... implemented by using an approach based on stochastic techniques (Monte Carlo simulation and Bootstrap re-sampling) or scenario analysis combined with model sensitivity tests. Two transport models are used as case studies: the Næstved model and the Danish National Transport Model. 3 The first paper...... in a four-stage transport model related to different variable distributions (to be used in a Monte Carlo simulation procedure), assignment procedures and levels of congestion, at both the link and the network level. The analysis used as case study the Næstved model, referring to the Danish town of Næstved2...

Direct coupling of a genome-scale microbial in silico model and a groundwater reactive transport model

International Nuclear Information System (INIS)

Fang, Yilin; Scheibe, Timothy D.; Mahadevan, Radhakrishnan; Garg, Srinath; Long, Philip E.; Lovley, Derek R.

2011-01-01

The activity of microorganisms often plays an important role in dynamic natural attenuation or engineered bioremediation of subsurface contaminants, such as chlorinated solvents, metals, and radionuclides. To evaluate and/or design bioremediated systems, quantitative reactive transport models are needed. State-of-the-art reactive transport models often ignore the microbial effects or simulate the microbial effects with static growth yield and constant reaction rate parameters over simulated conditions, while in reality microorganisms can dynamically modify their functionality (such as utilization of alternative respiratory pathways) in response to spatial and temporal variations in environmental conditions. Constraint-based genome-scale microbial in silico models, using genomic data and multiple-pathway reaction networks, have been shown to be able to simulate transient metabolism of some well studied microorganisms and identify growth rate, substrate uptake rates, and byproduct rates under different growth conditions. These rates can be identified and used to replace specific microbially-mediated reaction rates in a reactive transport model using local geochemical conditions as constraints. We previously demonstrated the potential utility of integrating a constraint based microbial metabolism model with a reactive transport simulator as applied to bioremediation of uranium in groundwater. However, that work relied on an indirect coupling approach that was effective for initial demonstration but may not be extensible to more complex problems that are of significant interest (e.g., communities of microbial species, multiple constraining variables). Here, we extend that work by presenting and demonstrating a method of directly integrating a reactive transport model (FORTRAN code) with constraint-based in silico models solved with IBM ILOG CPLEX linear optimizer base system (C library). The models were integrated with BABEL, a language interoperability tool. The

Up-gradient transport in a probabilistic transport model

DEFF Research Database (Denmark)

Gavnholt, J.; Juul Rasmussen, J.; Garcia, O.E.

2005-01-01

The transport of particles or heat against the driving gradient is studied by employing a probabilistic transport model with a characteristic particle step length that depends on the local concentration or heat gradient. When this gradient is larger than a prescribed critical value, the standard....... These results supplement recent works by van Milligen [Phys. Plasmas 11, 3787 (2004)], which applied Levy distributed step sizes in the case of supercritical gradients to obtain the up-gradient transport. (c) 2005 American Institute of Physics....

Modelling of radon transport in porous media

NARCIS (Netherlands)

van der Graaf, E.R.; de Meijer, R.J.; Katase, A; Shimo, M

1998-01-01

This paper aims to describe the state of the art of modelling radon transport in soil on basis of multiphase radon transport equations. Emphasis is given to methods to obtain a consistent set of input parameters needed For such models. Model-measurement comparisons with the KVI radon transport

Development of solute transport models in YMPYRÄ framework to simulate solute migration in military shooting and training areas

Science.gov (United States)

Warsta, L.; Karvonen, T.

2017-12-01

There are currently 25 shooting and training areas in Finland managed by The Finnish Defence Forces (FDF), where military activities can cause contamination of open waters and groundwater reservoirs. In the YMPYRÄ project, a computer software framework is being developed that combines existing open environmental data and proprietary information collected by FDF with computational models to investigate current and prevent future environmental problems. A data centric philosophy is followed in the development of the system, i.e. the models are updated and extended to handle available data from different areas. The results generated by the models are summarized as easily understandable flow and risk maps that can be opened in GIS programs and used in environmental assessments by experts. Substances investigated with the system include explosives and metals such as lead, and both surface and groundwater dominated areas can be simulated. The YMPYRÄ framework is composed of a three dimensional soil and groundwater flow model, several solute transport models and an uncertainty assessment system. Solute transport models in the framework include particle based, stream tube and finite volume based approaches. The models can be used to simulate solute dissolution from source area, transport in the unsaturated layers to groundwater and finally migration in groundwater to water extraction wells and springs. The models can be used to simulate advection, dispersion, equilibrium adsorption on soil particles, solubility and dissolution from solute phase and dendritic solute decay chains. Correct numerical solutions were confirmed by comparing results to analytical 1D and 2D solutions and by comparing the numerical solutions to each other. The particle based and stream tube type solute transport models were useful as they could complement the traditional finite volume based approach which in certain circumstances produced numerical dispersion due to piecewise solution of the

Recommendations for computer code selection of a flow and transport code to be used in undisturbed vadose zone calculations for TWRS immobilized wastes environmental analyses

International Nuclear Information System (INIS)

VOOGD, J.A.

1999-01-01

An analysis of three software proposals is performed to recommend a computer code for immobilized low activity waste flow and transport modeling. The document uses criteria restablished in HNF-1839, ''Computer Code Selection Criteria for Flow and Transport Codes to be Used in Undisturbed Vadose Zone Calculation for TWRS Environmental Analyses'' as the basis for this analysis

Environmental comparison of marine and road transportation using LCA; Miljoemessig sammenligning av skips- og veitransport ved bruk av LCA

Energy Technology Data Exchange (ETDEWEB)

Brekke, Andreas; Vold, Bjoern Ivar

2011-07-01

This report compares the transport by sea transport versus road for some selected scenarios that all end up in Oslo. Scenarios are chosen because they reflect realistic transportation options for products that consumers can relate to. It is therefore decided to look at the transportation of house modules from Estonia, kitchen units from Denmark, TVs from Germany and containers from Rotterdam. There are only examined some selected environmental stresses, including categories of climate change, acidification and eutrophication (excessive nutrients). Environmental impact categories are chosen for relevance (ie that transport contributes to such environmental stresses and that the environmental impact categories that may be important) and data availability (it's relevant categories for which data are lacking, such as noise and toxicity). Table A shows the results for all the examined scenarios of probable reservoir levels. One can see from the table that sea transport gives better environmental performance than the surface of all the scenarios in the categories climate change and eutrophication. For acidification is only one scenario where sea transport means less strain than land transport (transport of containers from Rotterdam). It should be emphasized that the relative contributions are greater climate change than to acidification and eutrophication for all options, and also the importance of climate change is considered to be greater than for acidification and eutrophication, Man may therefore conclude that sea transport is more environmentally friendly than road transport for all the investigated options. Underlying data are taken from real options for the transport ships and updated emissions data for trucks from environmental databases (EcoInvent). It is considered a completely new truck park in the comparisons presented above, the assumption is examined in sensitivity analyzes. With the Port as principal, it was important to have a conservative approach

Physical modelling and testing in environmental geotechnics

International Nuclear Information System (INIS)

Garnier, J.; Thorel, L.; Haza, E.

2000-01-01

The preservation of natural environment has become a major concern, which affects nowadays a wide range of professionals from local communities administrators to natural resources managers (water, wildlife, flora, etc) and, in the end, to the consumers that we all are. Although totally ignored some fifty years ago, environmental geotechnics has become an emergent area of study and research which borders on the traditional domains, with which the geo-technicians are confronted (soil and rock mechanics, engineering geology, natural and anthropogenic risk management). Dedicated to experimental approaches (in-situ investigations and tests, laboratory tests, small-scale model testing), the Symposium fits in with the geotechnical domains of environment and transport of soil pollutants. These proceedings report some progress of developments in measurement techniques and studies of transport of pollutants in saturated and unsaturated soils in order to improve our understanding of such phenomena within multiphase environments. Experimental investigations on decontamination and isolation methods for polluted soils are discussed. The intention is to assess the impact of in-situ and laboratory tests, as well as small-scale model testing, on engineering practice. One paper is analysed in INIS data base for its specific interest in nuclear industry. The other ones, concerning the energy, are analyzed in ETDE data base

Monte Carlo impurity transport modeling in the DIII-D transport

International Nuclear Information System (INIS)

Evans, T.E.; Finkenthal, D.F.

1998-04-01

A description of the carbon transport and sputtering physics contained in the Monte Carlo Impurity (MCI) transport code is given. Examples of statistically significant carbon transport pathways are examined using MCI's unique tracking visualizer and a mechanism for enhanced carbon accumulation on the high field side of the divertor chamber is discussed. Comparisons between carbon emissions calculated with MCI and those measured in the DIII-D tokamak are described. Good qualitative agreement is found between 2D carbon emission patterns calculated with MCI and experimentally measured carbon patterns. While uncertainties in the sputtering physics, atomic data, and transport models have made quantitative comparisons with experiments more difficult, recent results using a physics based model for physical and chemical sputtering has yielded simulations with about 50% of the total carbon radiation measured in the divertor. These results and plans for future improvement in the physics models and atomic data are discussed

Environmental Modeling Center

Data.gov (United States)

Federal Laboratory Consortium — The Environmental Modeling Center provides the computational tools to perform geostatistical analysis, to model ground water and atmospheric releases for comparison...

Dynamic linkages between road transport energy consumption, economic growth, and environmental quality: evidence from Pakistan.

Science.gov (United States)

Danish; Baloch, Muhammad Awais

2018-03-01

The focus of the present research work is to investigate the dynamic relationship between economic growth, road transport energy consumption, and environmental quality. To this end, we rely on time series data for the period 1971 to 2014 in the context of Pakistan. To use sulfur dioxide (SO 2 ) emission from transport sector as a new proxy for measuring environmental quality, the present work employs time series technique ARDL which allows energy consumption from the transport sector, urbanization, and road infrastructure to be knotted by symmetric relationships with SO 2 emissions and economic growth. From the statistical results, we confirm that road infrastructure boosts economic growth. Simultaneously, road infrastructure and urbanization hampers environmental quality and causes to accelerate emission of SO 2 in the atmosphere. Furthermore, economic growth has a diminishing negative impact on total SO 2 emission. Moreover, we did not find any proof of the expected role of transport energy consumption in SO 2 emission. The acquired results directed that care should be taken in the expansion of road infrastructure and green city policies and planning are required in the country.

Coal supply and transportation model (CSTM)

International Nuclear Information System (INIS)

1991-11-01

The Coal Supply and Transportation Model (CSTM) forecasts annual coal supply and distribution to domestic and foreign markets. The model describes US coal production, national and international coal transportation industries. The objective of this work is to provide a technical description of the current version of the model

Transport Choice Modeling for the Evaluation of New Transport Policies

Directory of Open Access Journals (Sweden)

Ander Pijoan

2018-04-01

Full Text Available Quantifying the impact of the application of sustainable transport policies is essential in order to mitigate effects of greenhouse gas emissions produced by the transport sector. One of the most common approaches used for this purpose is that of traffic modelling and simulation, which consists of emulating the operation of an entire road network. This article presents the results of fitting 8 well known data science methods for transport choice modelling, the area in which more research is needed. The models have been trained with information from Biscay province in Spain in order to match as many of its commuters as possible. Results show that the best models correctly forecast more than 51% of the trips recorded. Finally, the results have been validated with a second data set from the Silesian Voivodeship in Poland, showing that all models indeed maintain their forecasting ability.

Biological transportation networks: Modeling and simulation

KAUST Repository

Albi, Giacomo; Artina, Marco; Foransier, Massimo; Markowich, Peter A.

2015-01-01

We present a model for biological network formation originally introduced by Cai and Hu [Adaptation and optimization of biological transport networks, Phys. Rev. Lett. 111 (2013) 138701]. The modeling of fluid transportation (e.g., leaf venation

Unit environmental transport assessment of contaminants from Hanford's past-practice waste sites. Hanford Remedial Action Environmental Impact Statement

International Nuclear Information System (INIS)

Whelan, G.; Buck, J.W.; Castleton, K.J.

1995-06-01

The US Department of Energy, Richland Operations Office (DOE-RL) contracted Pacific Northwest Laboratory (PNL) to provide support to Advanced Sciences, Incorporated (ASI) in implementing tile regional no-action risk assessment in the Hanford Remedial Action Environmental Impact Statement. Researchers at PNL were charged with developing unit concentrations for soil, groundwater, surface water, and air at multiple locations within an 80-km radius from the center of tile Hanford installation. Using the Multimedia Environmental Pollutant Assessment System (MEPAS), PNL simulated (1) a unit release of one ci for each radionuclide and one kg for each chemical from contaminated soils and ponded sites, (2) transport of the contaminants in and through various environmental media and (3) exposure/risk of four exposure scenarios, outlined by the Hanford Site Baseline Remedial Action Methodology. These four scenarios include residential, recreational, industrial, and agricultural exposures. Spacially and temporally distributed environmental concentrations based on unit releases of radionuclides and chemicals were supported to ASI in support of the HRA-EIS. Risk for the four exposure scenarios, based on unit environment concentrations in air, water, and soil. were also supplied to ASI. This report outlines the procedure that was used to implement the unit transport portion of the HRA-EIS baseline risk assessment. Deliverables include unit groundwater, surface water, air, and soil concentrations at multiple locations within an 80-km radius from the center of the Hanford installation

RADIONUCLIDE TRANSPORT MODELS UNDER AMBIENT CONDITIONS

Energy Technology Data Exchange (ETDEWEB)

S. Magnuson

2004-11-01

The purpose of this model report is to document the unsaturated zone (UZ) radionuclide transport model, which evaluates, by means of three-dimensional numerical models, the transport of radioactive solutes and colloids in the UZ, under ambient conditions, from the repository horizon to the water table at Yucca Mountain, Nevada.

Environmental model for a capital city

Directory of Open Access Journals (Sweden)

Claudia Eugenia Toca Torres

2013-06-01

Full Text Available From a review of the various options for modeling a sustainable development in its environmental dimension, this research proposes a model of environmental impact for Bogota, using the Vensim PLE software to model the pollution, the pollution load and soil contamination. The model includes a limited number of endogenous variables, as well as a greater number of exogenous variables. This modeling allows us to anticipate the environmental situation in the capital, in order to support public policies for addressing issues such as economic sanctions and moral regulations on emissions, discharges and waste, environmental measures and environmentally friendly practices

Uncertainty characteristics of EPA's ground-water transport model for low-level waste performance assessment

International Nuclear Information System (INIS)

Yim, Man-Sung

1995-01-01

Performance assessment is an essential step either in design or in licensing processes to ensure the safety of any proposed radioactive waste disposal facilities. Since performance assessment requires the use of computer codes, understanding the characteristics of computer models used and the uncertainties of the estimated results is important. The PRESTO-EPA code, which was the basis of the Environmental Protection Agency's analysis for low-level-waste rulemaking, is widely used for various performance assessment activities in the country with no adequate information available for the uncertainty characteristics of the results. In this study, the groundwater transport model PRESTO-EPA was examined based on the analysis of 14 C transport along with the investigation of uncertainty characteristics

Long-range Transport Modeling System and its Application over the Northeast Asia

Directory of Open Access Journals (Sweden)

Il-Soo Park

2006-06-01

Full Text Available A Comprehensive Acid Deposition Modeling (CADM was developed at the National Institute of Environmental Research (NIER and Yonsei University in South Korea in order to simulate the long-range transboundary air pollutants and regional acid deposition processes over the Northeast Asia. The modeling system CADM is composed of a real-time numerical weather forecasting model (RAMS and an Eulerian air pollution transport/dispersion/deposition model including gas- and aqueous-phase atmospheric chemical processes for the real-time acquisition of model results and prediction of acidic pollutants. The main objective of CADM is to facilitate an efficient assessment tools by providing the explicit information on the acidic deposition processes. This paper introduces the components of CADM, and describes the comprehensive atmospheric modeling system including atmospheric chemistry for the simulation of acidic processes over the Eastern Asia. The presently developed modeling system CADM has been used to simulate long-range transport over the Northeast Asian region during the spring season from March 5 to 15 2002. For the model validation, the simulated results are compared with both aircraft measurements and surface monitoring observations, and discussed for its operational consideration in Korea

Transport and environmental sustainability: An adapted SPE approach for modelling interactions between transport, infrastructure, economy and environment

Energy Technology Data Exchange (ETDEWEB)

Verhoef, Erik; Van den Bergh, Jeroen [Department of Spatial Economics, Faculty of Economics and Econometrics, Free University Amsterdam, Amsterdam (Netherlands)

1994-05-01

The present paper aims at shedding some light on the concept of `sustainable transport`. Within the context of a sustainable development, the consequences of interdependencies between transport, infrastructure, economy and environment for the formulation of optimal regulatory policies are investigated. The Spatial Price Equilibrium approach is adapted for the analysis of sustainable spatio-economic development, and for the evaluation of first-best and second-best regulatory policies on the issues at hand. The analysis demonstrates the need for integration of elements concerning economic structure, infrastructure, transportation, environment and space in one single analytical framework when considering questions on sustainability in relation to transport. 2 figs., 1 appendix, 10 refs.

Modeling sediment transport in Qatar: Application for coastal development planning.

Science.gov (United States)

Yousif, Ruqaiya; Warren, Christopher; Ben-Hamadou, Radhouan; Husrevoglu, Sinan

2018-03-01

Hydrodynamics and sediment transport are key physical processes contributing to habitat structure within the marine environment. Coastal development that results in the alteration of these processes (e.g., changing water flushing and/or sedimentation rates) can have detrimental impacts on sensitive systems. This is a current, relevant issue in Qatar as its coastal regions continue to be developed, not only around the capital of Doha, but in many areas around this Arabian Gulf peninsula. The northeastern Qatari coast is comprised of diverse and sensitive flora and fauna such as seagrass and macroalgae meadows, coral reefs and patches, turtles, and dugongs that tolerate harsh environmental conditions. In the near future, this area may see a rise in anthropogenic activity in the form of coastal development projects. These projects will add to existing natural stresses, such as high temperature, high salinity, and low rates of precipitation. Consequently, there is a need to characterize this area and assess the potential impacts that these anthropogenic activities may have on the region. In the present study, a novel sediment transport model is described and used to demonstrate the potential impact of altering hydrodynamics and subsequent sediment transport along the northeastern Qatar nearshore marine environment. The developed models will be tested using potential scenarios of future anthropogenic activities forecasted to take place in the area. The results will show the effects on water and sediment behavior and provide a scientific approach for key stakeholders to make decisions with respect to the management of the considered coastal zone. Furthermore, it provides a tool and framework that can be utilized in environmental impact assessment and associated hydrodynamic studies along other areas of the Qatari coastal zone. Integr Environ Assess Manag 2018;14:240-251. © 2017 SETAC. © 2017 SETAC.

Electronic transport in VO{sub 2}—Experimentally calibrated Boltzmann transport modeling

Energy Technology Data Exchange (ETDEWEB)

Kinaci, Alper; Rosenmann, Daniel; Chan, Maria K. Y., E-mail: debasish.banerjee@toyota.com, E-mail: mchan@anl.gov [Center for Nanoscale Materials, Argonne National Laboratory, Argonne, Illinois 60439 (United States); Kado, Motohisa [Higashifuji Technical Center, Toyota Motor Corporation, Susono, Shizuoka 410-1193 (Japan); Ling, Chen; Zhu, Gaohua; Banerjee, Debasish, E-mail: debasish.banerjee@toyota.com, E-mail: mchan@anl.gov [Materials Research Department, Toyota Motor Engineering and Manufacturing North America, Inc., Ann Arbor, Michigan 48105 (United States)

2015-12-28

Materials that undergo metal-insulator transitions (MITs) are under intense study, because the transition is scientifically fascinating and technologically promising for various applications. Among these materials, VO{sub 2} has served as a prototype due to its favorable transition temperature. While the physical underpinnings of the transition have been heavily investigated experimentally and computationally, quantitative modeling of electronic transport in the two phases has yet to be undertaken. In this work, we establish a density-functional-theory (DFT)-based approach with Hubbard U correction (DFT + U) to model electronic transport properties in VO{sub 2} in the semiconducting and metallic regimes, focusing on band transport using the Boltzmann transport equations. We synthesized high quality VO{sub 2} films and measured the transport quantities across the transition, in order to calibrate the free parameters in the model. We find that the experimental calibration of the Hubbard correction term can efficiently and adequately model the metallic and semiconducting phases, allowing for further computational design of MIT materials for desirable transport properties.

Simplified model for radioactive contaminant transport: the TRANSS code

International Nuclear Information System (INIS)

Simmons, C.S.; Kincaid, C.T.; Reisenauer, A.E.

1986-09-01

A simplified ground-water transport model called TRANSS was devised to estimate the rate of migration of a decaying radionuclide that is subject to sorption governed by a linear isotherm. Transport is modeled as a contaminant mass transmitted along a collection of streamlines constituting a streamtube, which connects a source release zone with an environmental arrival zone. The probability-weighted contaminant arrival distribution along each streamline is represented by an analytical solution of the one-dimensional advection-dispersion equation with constant velocity and dispersion coefficient. The appropriate effective constant velocity for each streamline is based on the exact travel time required to traverse a streamline with a known length. An assumption used in the model to facilitate the mathematical simplification is that transverse dispersion within a streamtube is negligible. Release of contaminant from a source is described in terms of a fraction-remaining curve provided as input information. However, an option included in the code is the calculation of a fraction-remaining curve based on four specialized release models: (1) constant release rate, (2) solubility-controlled release, (3) adsorption-controlled release, and (4) diffusion-controlled release from beneath an infiltration barrier. To apply the code, a user supplies only a certain minimal number of parameters: a probability-weighted list of travel times for streamlines, a local-scale dispersion coefficient, a sorption distribution coefficient, total initial radionuclide inventory, radioactive half-life, a release model choice, and size dimensions of the source. The code is intended to provide scoping estimates of contaminant transport and does not predict the evolution of a concentration distribution in a ground-water flow field. Moreover, the required travel times along streamlines must be obtained from a prior ground-water flow simulation

Cumulus parameterizations in chemical transport models

Science.gov (United States)

Mahowald, Natalie M.; Rasch, Philip J.; Prinn, Ronald G.

1995-12-01

Global three-dimensional chemical transport models (CTMs) are valuable tools for studying processes controlling the distribution of trace constituents in the atmosphere. A major uncertainty in these models is the subgrid-scale parametrization of transport by cumulus convection. This study seeks to define the range of behavior of moist convective schemes and point toward more reliable formulations for inclusion in chemical transport models. The emphasis is on deriving convective transport from meteorological data sets (such as those from the forecast centers) which do not routinely include convective mass fluxes. Seven moist convective parameterizations are compared in a column model to examine the sensitivity of the vertical profile of trace gases to the parameterization used in a global chemical transport model. The moist convective schemes examined are the Emanuel scheme [Emanuel, 1991], the Feichter-Crutzen scheme [Feichter and Crutzen, 1990], the inverse thermodynamic scheme (described in this paper), two versions of a scheme suggested by Hack [Hack, 1994], and two versions of a scheme suggested by Tiedtke (one following the formulation used in the ECMWF (European Centre for Medium-Range Weather Forecasting) and ECHAM3 (European Centre and Hamburg Max-Planck-Institut) models [Tiedtke, 1989], and one formulated as in the TM2 (Transport Model-2) model (M. Heimann, personal communication, 1992). These convective schemes vary in the closure used to derive the mass fluxes, as well as the cloud model formulation, giving a broad range of results. In addition, two boundary layer schemes are compared: a state-of-the-art nonlocal boundary layer scheme [Holtslag and Boville, 1993] and a simple adiabatic mixing scheme described in this paper. Three tests are used to compare the moist convective schemes against observations. Although the tests conducted here cannot conclusively show that one parameterization is better than the others, the tests are a good measure of the

Establishing credibility in the environmental models used for safety and licensing calculations in the nuclear industry

International Nuclear Information System (INIS)

Davis, P.A.

1997-01-01

Models that simulate the transport and behaviour of radionuclides in the environment are used extensively in the nuclear industry for safety and licensing purposes. They are needed to calculate derived release limits for new and operating facilities, to estimate consequences following hypothetical accidents and to help manage a real emergency. But predictions generated for these purposes are essentially meaningless unless they are accompanied by a quantitative estimate of the confidence that can be placed in them. For example, in an emergency where there has been an accidental release of radioactivity to the atmosphere, decisions based on a validated model with small uncertainties would likely be very different from those based on an untested model, or on one with large uncertainties. This paper begins with a discussion of some general methods for establishing the credibility of model predictions. The focus will be on environmental transport models but the principles apply to models of all kinds. Establishing the credibility of a model is not a trivial task, It involves a number of tasks including face validation, verification, experimental validation and sensitivity and uncertainty analyses. The remainder of the paper will present quantitative results relating to the credibility of environmental transport models. Model formation, choice of parameter values and the influence of the user will all be discussed as sources of uncertainty in predictions. The magnitude of uncertainties that must be expected in various applications of the models will be presented. The examples used throughout the paper are drawn largely from recent work carried out in BIOMOVS and VAMP. (DM)

75 FR 4619 - Intent to Prepare an Environmental Impact Statement on Transportation Improvements Within the...

Science.gov (United States)

2010-01-28

... the constraints placed on it by RTA's financial capacities. Financial plans are suggesting that RTA... Impact Statement on Transportation Improvements Within the Blue-Line Corridor in Shaker Heights and... Transportation. ACTION: Notice of Intent to prepare an Environmental Impact Statement. SUMMARY: The Federal...

[Environmental behavior of graphene and its effect on the transport and fate of pollutants in environment].

Science.gov (United States)

Ren, Wen-Jie; Teng, Ying

2014-09-01

Graphene is one of the most popular research topics in carbon nanomaterials. Because of its special physical and chemical properties, graphene will have wide applications. As the production and application amount is increasing, graphene will be inevitably released to the environment, resulting in risks of ecological environment and human health. It is of very vital significance for evaluating environmental risks of graphene scientifically and objectively to understand its environmental behavior and fate and explore its effect on the environmental behaviors of pollutants. This paper reviewed the environmental behavior of graphene, such as colloid properties and its stability in the aqueous environment and its transport through porous media. Additionally, the paper reviewed the effect of graphene on the transport and fate of pollutants. The interactions between graphene and heavy metals or organic compounds were especially discussed. Important topics should be explored including sorption mechanisms, interactions between graphene and soil components, influence of graphene on the transport and bioavailability of pollutants in environment, as well as approaches to quantifying graphene. The review might identify potential new ideas for further research in applications of graphene.

Transport and retention of biochar nanoparticles in a paddy soil under environmentally-relevant solution chemistry conditions.

Science.gov (United States)

Chen, Ming; Wang, Dengjun; Yang, Fan; Xu, Xiaoyun; Xu, Nan; Cao, Xinde

2017-11-01

Land application of biochar has been increasingly recommended as a powerful strategy for carbon sequestration and soil remediation. However, the biochar particles, especially those in the nanoscale range, may migrate or carry the inherent contaminants along the soil profile, posing a potential risk to the groundwater. This study investigated the transport and retention of wood chip-derived biochar nanoparticles (NPs) in water-saturated columns packed with a paddy soil. The environmentally-relevant soil solution chemistry including ionic strength (0.10-50 mM), electrolyte type (NaCl and CaCl 2 ), and natural organic matter (0-10 mg L -1 humic acid) were tested to elucidate their effects on the biochar NPs transport. Higher mobility of biochar NPs was observed in the soil at lower ionic strengths, with CaCl 2 electrolyte being more effective than NaCl in decreasing biochar NPs transport. The retained biochar NPs in NaCl was re-entrained (∼57.7%) upon lowering transient pore-water ionic strength, indicating that biochar NPs were reversibly retained in the secondary minimum. In contrast, negligible re-entrainment of biochar NPs occurred in CaCl 2 due to the primary minimum and/or particle aggregation. Humic acid increased the mobility of biochar NPs, likely due to enhanced electrosteric repulsive interactions. The transport behaviors of biochar NPs can be well interpreted by a two-site kinetic retention model that assumes reversible retention for one site, and irreversible retention for the other site. Our findings indicated that the transport of wood chip biochar NPs is significant in the paddy soil, highlighting the importance of understanding the mobility of biochar NPs in natural soils for accurately assessing their environmental impacts. Copyright © 2017 Elsevier Ltd. All rights reserved.

Modelling radionuclide transport in the geosphere: a review of the models available

International Nuclear Information System (INIS)

Cacas, M.C.; Cordier, E.; Coudrain-Ribstein, A.; Fargue, D.; Goblet, P.; Jamet, Ph.; Ledoux, E.; Marsily, G. de; Vinsot, A.; Brun, Ch.; Cernes, A.; Jacquier, Ph.; Lewi, J.; Priem, Th.

1990-01-01

Over the last twelve years, several models have been developed to simulate the transport of radionuclides in the environment of a radioactive waste repository: - continuous equivalent porous media flow and transport models using the finite element method in 1, 2 or 3 dimensions and taking into account various coupled mechanisms; - discontinuous stochastic fracture network models in 3 dimensions representing flow, transport, matrix diffusion, heat flow and mechanical stress; - geochemical models representing interactions between transported elements and a solid matrix; - transport process models coupling non dominant phenomena such as thermo-diffusion or thermo-gravitation. This paper reviews the role that each of these models can play in safety analyses. 3 refs [fr

Modeling approaches for characterizing and evaluating environmental exposure to engineered nanomaterials in support of risk-based decision making.

Science.gov (United States)

Hendren, Christine Ogilvie; Lowry, Michael; Grieger, Khara D; Money, Eric S; Johnston, John M; Wiesner, Mark R; Beaulieu, Stephen M

2013-02-05

As the use of engineered nanomaterials becomes more prevalent, the likelihood of unintended exposure to these materials also increases. Given the current scarcity of experimental data regarding fate, transport, and bioavailability, determining potential environmental exposure to these materials requires an in depth analysis of modeling techniques that can be used in both the near- and long-term. Here, we provide a critical review of traditional and emerging exposure modeling approaches to highlight the challenges that scientists and decision-makers face when developing environmental exposure and risk assessments for nanomaterials. We find that accounting for nanospecific properties, overcoming data gaps, realizing model limitations, and handling uncertainty are key to developing informative and reliable environmental exposure and risk assessments for engineered nanomaterials. We find methods suited to recognizing and addressing significant uncertainty to be most appropriate for near-term environmental exposure modeling, given the current state of information and the current insufficiency of established deterministic models to address environmental exposure to engineered nanomaterials.

A Freight Transport Model for Integrated Network, Service, and Policy Design

NARCIS (Netherlands)

Zhang, M.

2013-01-01

“The goal of the European Transport Policy is to establish a sustainable transport system that meets society’s economic, social and environmental needs…” (ECE, 2009). This statement indicates the challenges that the European transport policy makers are faced with when facilitating an increasing

Environmental assessment model for shallow land disposal of low-level radioactive wastes: interim report

International Nuclear Information System (INIS)

Little, C.A.; Fields, D.E.; Emerson, C.J.; Hiromoto, G.

1981-09-01

PRESTO (Prediction of Radiation Effects from Shallow Trench Operations) is a computer code developed under US Environmental Protection Agency (EPA) funding to evaluate possible health effects from shallow land burial trenches. The model is intended to be generic and to assess radionuclide transport, ensuing exposure, and health impact to a static local population for a 1000-y period following the end of burial operations. Human exposure scenarios considered by the model include normal releases (including leaching and operational spillage), human intrusion, and site farming or reclamation. Pathways and processes of transit from the trench to an individual or population include: groundwater transport, overland flow, erosion, surface water dilution, resuspension, atmospheric transport, deposition, inhalation, and ingestion of contaminated beef, milk, crops, and water. Both population doses and individual doses are calculated as well as doses to the intruder and farmer

Transient environmental effects of light alloy substitutions in transport vehicles

International Nuclear Information System (INIS)

Caceres, Carlos H.

2009-01-01

Materials indices and exchange constants are combined with Field et al.'s fleet analysis [Field F, Kirchain R, Clark J. Life-cycle assessment and temporal distributions of emissions: developing a fleet-based analysis. J Indust Ecol 2000;4:71-91, (doi:10.1162/108819800569816)] to examine the time-dependent CO 2 emissions attached to the production of the Al and Mg alloys used to reduce the mass of transport vehicles. The model is used to breakdown the temporal pattern of upfront emissions of passenger cars according to the mass and CO 2 -footprint efficiency of typical automotive structural substitutions (castings, stiff panels and stiff beams), accounting for the effect of recycling. The fleet's upfront emissions of Al and Mg castings with high content of secondary metal are offset by the increased fuel efficiency after 4 years of driving. Al beams and panels and electrolytic Mg panels require between 8 and 15 years, whereas for panels and beams of Pidgeon Mg no environmental benefits ever materialise.

Methods for testing transport models

International Nuclear Information System (INIS)

Singer, C.; Cox, D.

1993-01-01

This report documents progress to date under a three-year contract for developing ''Methods for Testing Transport Models.'' The work described includes (1) choice of best methods for producing ''code emulators'' for analysis of very large global energy confinement databases, (2) recent applications of stratified regressions for treating individual measurement errors as well as calibration/modeling errors randomly distributed across various tokamaks, (3) Bayesian methods for utilizing prior information due to previous empirical and/or theoretical analyses, (4) extension of code emulator methodology to profile data, (5) application of nonlinear least squares estimators to simulation of profile data, (6) development of more sophisticated statistical methods for handling profile data, (7) acquisition of a much larger experimental database, and (8) extensive exploratory simulation work on a large variety of discharges using recently improved models for transport theories and boundary conditions. From all of this work, it has been possible to define a complete methodology for testing new sets of reference transport models against much larger multi-institutional databases

Direct coupling of a genome-scale microbial in silico model and a groundwater reactive transport model.

Science.gov (United States)

Fang, Yilin; Scheibe, Timothy D; Mahadevan, Radhakrishnan; Garg, Srinath; Long, Philip E; Lovley, Derek R

2011-03-25

The activity of microorganisms often plays an important role in dynamic natural attenuation or engineered bioremediation of subsurface contaminants, such as chlorinated solvents, metals, and radionuclides. To evaluate and/or design bioremediated systems, quantitative reactive transport models are needed. State-of-the-art reactive transport models often ignore the microbial effects or simulate the microbial effects with static growth yield and constant reaction rate parameters over simulated conditions, while in reality microorganisms can dynamically modify their functionality (such as utilization of alternative respiratory pathways) in response to spatial and temporal variations in environmental conditions. Constraint-based genome-scale microbial in silico models, using genomic data and multiple-pathway reaction networks, have been shown to be able to simulate transient metabolism of some well studied microorganisms and identify growth rate, substrate uptake rates, and byproduct rates under different growth conditions. These rates can be identified and used to replace specific microbially-mediated reaction rates in a reactive transport model using local geochemical conditions as constraints. We previously demonstrated the potential utility of integrating a constraint-based microbial metabolism model with a reactive transport simulator as applied to bioremediation of uranium in groundwater. However, that work relied on an indirect coupling approach that was effective for initial demonstration but may not be extensible to more complex problems that are of significant interest (e.g., communities of microbial species and multiple constraining variables). Here, we extend that work by presenting and demonstrating a method of directly integrating a reactive transport model (FORTRAN code) with constraint-based in silico models solved with IBM ILOG CPLEX linear optimizer base system (C library). The models were integrated with BABEL, a language interoperability tool. The

Direct coupling of a genome-scale microbial in silico model and a groundwater reactive transport model

Science.gov (United States)

Fang, Yilin; Scheibe, Timothy D.; Mahadevan, Radhakrishnan; Garg, Srinath; Long, Philip E.; Lovley, Derek R.

2011-03-01

The activity of microorganisms often plays an important role in dynamic natural attenuation or engineered bioremediation of subsurface contaminants, such as chlorinated solvents, metals, and radionuclides. To evaluate and/or design bioremediated systems, quantitative reactive transport models are needed. State-of-the-art reactive transport models often ignore the microbial effects or simulate the microbial effects with static growth yield and constant reaction rate parameters over simulated conditions, while in reality microorganisms can dynamically modify their functionality (such as utilization of alternative respiratory pathways) in response to spatial and temporal variations in environmental conditions. Constraint-based genome-scale microbial in silico models, using genomic data and multiple-pathway reaction networks, have been shown to be able to simulate transient metabolism of some well studied microorganisms and identify growth rate, substrate uptake rates, and byproduct rates under different growth conditions. These rates can be identified and used to replace specific microbially-mediated reaction rates in a reactive transport model using local geochemical conditions as constraints. We previously demonstrated the potential utility of integrating a constraint-based microbial metabolism model with a reactive transport simulator as applied to bioremediation of uranium in groundwater. However, that work relied on an indirect coupling approach that was effective for initial demonstration but may not be extensible to more complex problems that are of significant interest (e.g., communities of microbial species and multiple constraining variables). Here, we extend that work by presenting and demonstrating a method of directly integrating a reactive transport model (FORTRAN code) with constraint-based in silico models solved with IBM ILOG CPLEX linear optimizer base system (C library). The models were integrated with BABEL, a language interoperability tool. The

A Two-Wheeled, Self-Balancing Electric Vehicle Used As an Environmentally Friendly Individual Means of Transport

Science.gov (United States)

Bździuch, D.; Grzegożek, W.

2016-09-01

This paper shows a concept of a model of a two-wheeled self-balancing vehicle with an electric motor drive as an environmentally-friendly personal transporter. The principle of work, modelling of construction and performing a simulation are presented and discussed. The visualization of the designed vehicle was made thanks to using Solid Works a computer-aided design program. The vehicle was modelled as an inverted pendulum. The stability of the mechanism in the equilibrium position was studied. An exemplary steering system was also subjected to the analysis that compared two controllers: PID and LQR which enabled to monitor the balance of the vehicle when the required conditions were fulfilled. Modelling of work of the controllers and the evaluation of the obtained results in required conditions were performed in the MATLAB environment.

Modelling dust transport in tokamaks

International Nuclear Information System (INIS)

Martin, J.D.; Martin, J.D.; Bacharis, M.; Coppins, M.; Counsell, G.F.; Allen, J.E.; Counsell, G.F.

2008-01-01

The DTOKS code, which models dust transport through tokamak plasmas, is described. The floating potential and charge of a dust grain in a plasma and the fluxes of energy to and from it are calculated. From this model, the temperature of the dust grain can be estimated. A plasma background is supplied by a standard tokamak edge modelling code (B2SOLPS5.0), and dust transport through MAST (the Mega-Amp Spherical Tokamak) and ITER plasmas is presented. We conclude that micron-radius tungsten dust can reach the separatrix in ITER. (authors)

Perceptions, Preferences, and Behavior Regarding Energy and Environmental Costs: The Case of Montreal Transport Users

Directory of Open Access Journals (Sweden)

Nayer Daher

2018-02-01

Full Text Available Providing travel-related fuel and environmental information to transport users is becoming increasingly relevant. However, the impact of providing such information on users’ travel behavior is yet to be determined. This research examined the perceptions and preferences related to the fuel consumption costs, greenhouse gas (GHG social costs, and health-related air pollution costs, and the influence such information could have on travel behavior. Examining the case of Montreal transport users, the authors conducted a survey in which the respondents were asked general and stated preference questions. The respondents were found to be unaware of the energy and environmental footprints of their travel. Approximately 85% of the respondents were not able to estimate GHG social costs and health-related air pollution costs across different modes. The respondents generally overestimated these costs and they interestingly reported higher environmental costs for public transport (metro compared to cars. They also preferred to receive such information in monetary units, and they were more comfortable in receiving the information through mobile applications over other tools/means. The research also found that fuel and environmental information influence respondents’ travel decisions especially their route choices. Finally, the respondents would be willing to pay an average of 7 Canadian dollars/month in exchange for obtaining the information.

Intermodal Freight Transport on the Right Track? Environmental and economic performances and their trade-off

International Nuclear Information System (INIS)

Kim, Nam Seok

2010-01-01

This dissertation aims to evaluate environmental and economic performances of an intermodal freight transport system and to estimate the trade-off between CO2 emissions, which is presented as an indicator of environmental performance, and freight costs, which indicate the economic performance of the intermodal freight system. The truck-only system is always regarded as the counterpart of the intermodal freight system in this dissertation. To examine the environmental performance of the intermodal freight system, CO2 emissions generated from all the processes in the intermodal chain, such as pre-haulage and post-haulage, long distance haulage, and transshipment, are estimated considering different sources that generate electricity and transmission loss of electricity (Chapters 3 and 4). To examine the economic performance of the system, two approaches are considered: (1) finding the intermodal breakeven distance for which the intermodal system is more competitive than the truck-only system (Chapter 5); (2) examining the economies of scale in the intermodal network and finding the route/system choice that minimizes the total freight transportation costs (Chapter 6). Finally, this dissertation attempts to find the trade-off between CO2 emissions (representing the environmental performance) and freight transportation cost (representing the economic performance) (Chapter 7)

The european Trans-Tools transport model

NARCIS (Netherlands)

Rooijen, T. van; Burgess, A.

2008-01-01

The paper presents the use of ArcGIS in the Transtools Transport Model, TRANS-TOOLS, created by an international consortium for the European Commission. The model describe passenger as well as freight transport in Europe with all medium and long distance modes (cars, vans, trucks, train, inland

Environmental innovation through transport policy. The implementation of the free fare policy on public transport in Tallinn, Estonia

Energy Technology Data Exchange (ETDEWEB)

Gabaldon-Estevan, D.

2016-07-01

Urban areas are of increasing relevance when it comes to sustainability: First, about half of the world’s population now lives in cities (increasing to 60% by 2030). Second, cities are nowadays responsible for levels of resource consumption and waste generation that are higher beyond their share on world population. Third, cities are more vulnerable to disruptive events that can lead to restrictions on the provision of resources and to changes on the environment caused by climate change. And fourth, because they concentrate key resources (political, social, cultural…), cities are seen as strategic scenarios where to experiment and develop solutions to cope with the prevailing sustainability challenges driven by the major social and environmental transformations. Urban agglomerations can be seen as complex innovation systems where human activities are shaped in order to transform societies towards sustainable development. For this paper, we focus on the case of an environmental innovation regarding transport policy, the implementation of the fare-free policy on public transport for all inhabitants of Tallinn, Estonia. Tallinn, with 414,000 inhabitants in 2015, is the capital of Estonia and the largest city in the country. Over the last two decades the share of public transport trips decreased dramatically. After a public opinion poll in 2012, in which over 75% of the participants voted for a fare-free public transportation system (FFPTS) in Tallinn, the new policy was implemented on 1st January 2013. From that date on inhabitants of Tallinn could use all public transport services (busses, trams, trolly-busses) operated by city-run operators for free. Later the fare-free system was implemented also on trains within Tallinn. In this paper we analyze the context, in which this policy was implemented, the main characteristics of its implementation and its actual situation. (Author)

Two-point model for divertor transport

International Nuclear Information System (INIS)

Galambos, J.D.; Peng, Y.K.M.

1984-04-01

Plasma transport along divertor field lines was investigated using a two-point model. This treatment requires considerably less effort to find solutions to the transport equations than previously used one-dimensional (1-D) models and is useful for studying general trends. It also can be a valuable tool for benchmarking more sophisticated models. The model was used to investigate the possibility of operating in the so-called high density, low temperature regime

A Mercury Model of Atmospheric Transport

Energy Technology Data Exchange (ETDEWEB)

Christensen, Alex B. [Oregon State Univ., Corvallis, OR (United States); Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chodash, Perry A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Procassini, R. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2018-01-19

Using the particle transport code Mercury, accurate models were built of the two sources used in Operation BREN, a series of radiation experiments performed by the United States during the 1960s. In the future, these models will be used to validate Mercury’s ability to simulate atmospheric transport.

Promoting intermodal freight transport through the development of dry ports in Asia: An environmental perspective

Directory of Open Access Journals (Sweden)

Shinya Hanaoka

2011-07-01

This study reviews the status of intermodal freight transport in Asia from an environmental perspective. It examines intermodal transport opportunities presented by the development of inland dry ports in hinterland locations. This paper also reviews selected case studies of dry port development in Asia. Finally, we present the lessons to be learned for the promotion of intermodal freight transport from selected Asian countries as well as the policy options available.

Modeling Freight Ocean Rail and Truck Transportation Flows to Support Policy Analyses

Energy Technology Data Exchange (ETDEWEB)

Gearhart, Jared Lee [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wang, Hao [Cornell Univ., Ithaca, NY (United States); Nozick, Linda Karen [Cornell Univ., Ithaca, NY (United States); Xu, Ningxiong [Cornell Univ., Ithaca, NY (United States)

2017-11-01

Freight transportation represents about 9.5% of GDP, is responsible for about 8% of greenhouse gas emissions and supports the import and export of about 3.6 trillion in international trade; hence it is important that our national freight transportation system is designed and operated efficiently and embodies user fees and other policies that balance costs and environmental consequences. Hence, this paper develops a mathematical model to estimate international and domestic freight flows across ocean, rail and truck modes which can be used to study the impacts of changes in our infrastructure as well as the imposition of new user fees and changes in operating policies. This model is applied to two case studies: (1) a disruption of the maritime ports at Los Angeles/Long Beach similar to the impacts that would be felt in an earthquake; and (2) implementation of new user fees at the California ports.

Environmental Factors and Intermodal Freight Transportation: Analysis of the Decision Bases in the Case of Spanish Motorways of the Sea

Directory of Open Access Journals (Sweden)

Miguel Ángel López-Navarro

2014-03-01

Full Text Available Today, there is widespread consensus about the notable, yet simultaneously growing, negative environmental impacts generated by the transportation sector. Experts working in a number of different fields consider the current situation to be unsustainable and possible measures to reduce emissions and foster sustainability are being encouraged. The European Commission has highlighted the need to shift away from unimodal road transport toward a greater use of intermodal transport through, for example, motorways of the sea, in light of the evidence that the former makes a significant contribution to increased CO2 emissions. However, although there is a general perception that sea transport is environmentally preferable to road transport, recent studies are beginning to question this assumption. Moreover, little research has been conducted to quantify environmental aspects and incorporate them into the decision-making processes involved in the modal shift. This study first reviews the existing literature to examine the extent to which environmental aspects are relevant in the modal choice in the case of short sea shipping and motorways of the sea. Related to this, the study also evaluates the role that different agents may play in making decisions about choice of mode, taking into consideration environmental aspects. Secondly, we use the values the European Commission provides to calculate external costs for the Marco Polo freight transport project proposals (call 2013 to estimate the environmental costs for several routes (a total of 72, comparing the use of road haulage with the intermodal option that incorporates the Spanish motorways of the sea. The results of this comparative analysis show that the intermodal option is not always the best choice in environmental terms. Consequently, the traditional environmental argument to justify this alternative must be used carefully.

Multi-objective model of waste transportation management for crude palm oil industry

Science.gov (United States)

Silalahi, Meslin; Mawengkang, Herman; Irsa Syahputri, Nenna

2018-02-01

The crude palm oil industry is an agro-industrial commodity. The global market of this industry has experienced rapid growth in recent years, such that it has a strategic value to be developed for Indonesian economy. Despite these economic benefits there are a number of environmental problems at the factories, such as high water consumption, the generation of a large amount of wastewater with a high organic content, and the generation of a large quantity of solid wastes and air pollution. In terms of waste transportation, we propose a multiobjective programming model for managing business environmental risk in a crude palm oil manufacture which gives the best possible configuration of waste management facilities and allocates wastes to these facilities. Then we develop an interactive approach for tackling logistics and environmental risk production planning problem for the crude palm oil industry.

Evaluating the Environmental Fate of Short-Chain Chlorinated Paraffins (SCCPs) in the Nordic Environment Using a Dynamic Multimedia Model

OpenAIRE

Krogseth, Ingjerd Sunde; Breivik, Knut; Arnot, Jon A; Wania, Frank; Borgen, Anders; Schlabach, Martin

2013-01-01

Short chain chlorinated paraffins (SCCPs) raise concerns due to their potential for persistence, bioaccumulation, long-range transport and adverse effects. An understanding of their environmental fate remains limited, partly due to the complexity of the mixture. The purpose of this study was to evaluate whether a mechanistic, integrated, dynamic environmental fate and bioaccumulation multimedia model (CoZMoMAN) can reconcile what is known about environmental emissions and human exposure of SC...

Long-term modelling for estimation of man-induced environmental risks

International Nuclear Information System (INIS)

Mahura, A.; Baklanov, A.; Sorensen, J.H.; Tridvornov, A.

2006-01-01

Full text: As a part of the EU coordination action project ENVIRO-RISKS the long-term regional and transboundary atmospheric transport, dispersion, and deposition of atmospheric pollutants is investigated. Focus is on pollutants originating at nuclear and chemical risk sites of the NIS countries. Potential sources of atmospheric pollution include chemical and metallurgical enterprises and smelters, former testing polygons of nuclear weapons, and nuclear plants and facilities. These are situated within territories of Kazakhstan, Ukraine, and Russia (the Siberian, Ural, Krasnoyarsk, and Kola regions). The atmospheric pollutants considered are radionuclides such as Cs-137, I-131, and Sr-90 as well as sulphates and heavy metals. The Danish Emergency Model for Atmosphere (DERMA) is employed for simulations using 3D meteorological fields from the European Center for Medium-range Weather Forecasts. The modeled concentration and deposition fields of atmospheric pollutants are used as input into further collaborative studies to estimate the man-induced environmental risks from regionally and remotely located potential sources with a focus on Siberian territories. The temporal and spatial variability of these fields and the probabilities and contribution of removal during atmospheric transport are evaluated. Possible approaches for further GIS integration and use of obtained results are discussed with respect to estimation of man-received doses and risks, impact on environment with a focus on forests, applicability for integrated systems for regional environmental monitoring and management, and others. (author)

Working Group 7.1 on environmental transport, US-USSR Joint Coordinating Committee on Civilian Nuclear Reactor Safety

International Nuclear Information System (INIS)

Anspaugh, L.R.; Hendrickson, S.M.

1991-01-01

This report contains brief summaries of the status of projects of the Environmental Transport Group of the US-USSR Joint Coordinating Committee of Civilian Nuclear Reactor Safety. Projects reported on include: Management and Administration; Atmospheric Transport; Resuspension; External Dose; Terrestrial Food Chains; Aquatic Food Chains; Hydrological Transport; and Intercalibration

Exploring Environmental Effects of Accidents During Marine Transport of Dangerous Goods by Use of Accident Descriptions

DEFF Research Database (Denmark)

Rømer, Hans Gottberg; Haastrup, P.; Petersen, H J Styhr

1996-01-01

On the basis of 1776 descriptions of water transport accidents involving dangerous goods, environmental problems in connection with releases of this kind are described and discussed. It was found that most detailed descriptions of environmental consequences concerned oil accidents, although most...... longer than broad. Gravity scales used to describe and evaluate environmental consequences were discussed....

Centrifuge modelling of contaminant transport processes

OpenAIRE

Culligan, P. J.; Savvidou, C.; Barry, D. A.

1996-01-01

Over the past decade, research workers have started to investigate problems of subsurface contaminant transport through physical modelling on a geotechnical centrifuge. A major advantage of this apparatus is its ability to model complex natural systems in a controlled laboratory environment In this paper, we discusses the principles and scaling laws related to the centrifugal modelling of contaminant transport, and presents four examples of recent work that has bee...

Source-to-sink transport of sugar and regulation by environmental factors.

Science.gov (United States)

Lemoine, Remi; La Camera, Sylvain; Atanassova, Rossitza; Dédaldéchamp, Fabienne; Allario, Thierry; Pourtau, Nathalie; Bonnemain, Jean-Louis; Laloi, Maryse; Coutos-Thévenot, Pierre; Maurousset, Laurence; Faucher, Mireille; Girousse, Christine; Lemonnier, Pauline; Parrilla, Jonathan; Durand, Mickael

2013-01-01

Source-to-sink transport of sugar is one of the major determinants of plant growth and relies on the efficient and controlled distribution of sucrose (and some other sugars such as raffinose and polyols) across plant organs through the phloem. However, sugar transport through the phloem can be affected by many environmental factors that alter source/sink relationships. In this paper, we summarize current knowledge about the phloem transport mechanisms and review the effects of several abiotic (water and salt stress, mineral deficiency, CO2, light, temperature, air, and soil pollutants) and biotic (mutualistic and pathogenic microbes, viruses, aphids, and parasitic plants) factors. Concerning abiotic constraints, alteration of the distribution of sugar among sinks is often reported, with some sinks as roots favored in case of mineral deficiency. Many of these constraints impair the transport function of the phloem but the exact mechanisms are far from being completely known. Phloem integrity can be disrupted (e.g., by callose deposition) and under certain conditions, phloem transport is affected, earlier than photosynthesis. Photosynthesis inhibition could result from the increase in sugar concentration due to phloem transport decrease. Biotic interactions (aphids, fungi, viruses…) also affect crop plant productivity. Recent breakthroughs have identified some of the sugar transporters involved in these interactions on the host and pathogen sides. The different data are discussed in relation to the phloem transport pathways. When possible, the link with current knowledge on the pathways at the molecular level will be highlighted.

Development of the Transport Class Model (TCM) Aircraft Simulation From a Sub-Scale Generic Transport Model (GTM) Simulation

Science.gov (United States)

Hueschen, Richard M.

2011-01-01

A six degree-of-freedom, flat-earth dynamics, non-linear, and non-proprietary aircraft simulation was developed that is representative of a generic mid-sized twin-jet transport aircraft. The simulation was developed from a non-proprietary, publicly available, subscale twin-jet transport aircraft simulation using scaling relationships and a modified aerodynamic database. The simulation has an extended aerodynamics database with aero data outside the normal transport-operating envelope (large angle-of-attack and sideslip values). The simulation has representative transport aircraft surface actuator models with variable rate-limits and generally fixed position limits. The simulation contains a generic 40,000 lb sea level thrust engine model. The engine model is a first order dynamic model with a variable time constant that changes according to simulation conditions. The simulation provides a means for interfacing a flight control system to use the simulation sensor variables and to command the surface actuators and throttle position of the engine model.

Transperitoneal transport of creatinine. A comparison of kinetic models

DEFF Research Database (Denmark)

Fugleberg, S; Graff, J; Joffe, P

1994-01-01

Six kinetic models of transperitoneal creatinine transport were formulated and validated on the basis of experimental results obtained from 23 non-diabetic patients undergoing peritoneal dialysis. The models were designed to elucidate the presence or absence of diffusive, non-lymphatic convective...... including all three forms of transport is superior to other models. We conclude that the best model of transperitoneal creatinine transport includes diffusion, non-lymphatic convective transport and lymphatic convective transport....

Particle Tracking Model and Abstraction of Transport Processes

Energy Technology Data Exchange (ETDEWEB)

B. Robinson

2004-10-21

The purpose of this report is to document the abstraction model being used in total system performance assessment (TSPA) model calculations for radionuclide transport in the unsaturated zone (UZ). The UZ transport abstraction model uses the particle-tracking method that is incorporated into the finite element heat and mass model (FEHM) computer code (Zyvoloski et al. 1997 [DIRS 100615]) to simulate radionuclide transport in the UZ. This report outlines the assumptions, design, and testing of a model for calculating radionuclide transport in the UZ at Yucca Mountain. In addition, methods for determining and inputting transport parameters are outlined for use in the TSPA for license application (LA) analyses. Process-level transport model calculations are documented in another report for the UZ (BSC 2004 [DIRS 164500]). Three-dimensional, dual-permeability flow fields generated to characterize UZ flow (documented by BSC 2004 [DIRS 169861]; DTN: LB03023DSSCP9I.001 [DIRS 163044]) are converted to make them compatible with the FEHM code for use in this abstraction model. This report establishes the numerical method and demonstrates the use of the model that is intended to represent UZ transport in the TSPA-LA. Capability of the UZ barrier for retarding the transport is demonstrated in this report, and by the underlying process model (BSC 2004 [DIRS 164500]). The technical scope, content, and management of this report are described in the planning document ''Technical Work Plan for: Unsaturated Zone Transport Model Report Integration'' (BSC 2004 [DIRS 171282]). Deviations from the technical work plan (TWP) are noted within the text of this report, as appropriate. The latest version of this document is being prepared principally to correct parameter values found to be in error due to transcription errors, changes in source data that were not captured in the report, calculation errors, and errors in interpretation of source data.

Particle Tracking Model and Abstraction of Transport Processes

International Nuclear Information System (INIS)

Robinson, B.

2004-01-01

The purpose of this report is to document the abstraction model being used in total system performance assessment (TSPA) model calculations for radionuclide transport in the unsaturated zone (UZ). The UZ transport abstraction model uses the particle-tracking method that is incorporated into the finite element heat and mass model (FEHM) computer code (Zyvoloski et al. 1997 [DIRS 100615]) to simulate radionuclide transport in the UZ. This report outlines the assumptions, design, and testing of a model for calculating radionuclide transport in the UZ at Yucca Mountain. In addition, methods for determining and inputting transport parameters are outlined for use in the TSPA for license application (LA) analyses. Process-level transport model calculations are documented in another report for the UZ (BSC 2004 [DIRS 164500]). Three-dimensional, dual-permeability flow fields generated to characterize UZ flow (documented by BSC 2004 [DIRS 169861]; DTN: LB03023DSSCP9I.001 [DIRS 163044]) are converted to make them compatible with the FEHM code for use in this abstraction model. This report establishes the numerical method and demonstrates the use of the model that is intended to represent UZ transport in the TSPA-LA. Capability of the UZ barrier for retarding the transport is demonstrated in this report, and by the underlying process model (BSC 2004 [DIRS 164500]). The technical scope, content, and management of this report are described in the planning document ''Technical Work Plan for: Unsaturated Zone Transport Model Report Integration'' (BSC 2004 [DIRS 171282]). Deviations from the technical work plan (TWP) are noted within the text of this report, as appropriate. The latest version of this document is being prepared principally to correct parameter values found to be in error due to transcription errors, changes in source data that were not captured in the report, calculation errors, and errors in interpretation of source data

Rainfall-induced fecal indicator organisms transport from manured fields: model sensitivity analysis.

Science.gov (United States)

Martinez, Gonzalo; Pachepsky, Yakov A; Whelan, Gene; Yakirevich, Alexander M; Guber, Andrey; Gish, Timothy J

2014-02-01

Microbial quality of surface waters attracts attention due to food- and waterborne disease outbreaks. Fecal indicator organisms (FIOs) are commonly used for the microbial pollution level evaluation. Models predicting the fate and transport of FIOs are required to design and evaluate best management practices that reduce the microbial pollution in ecosystems and water sources and thus help to predict the risk of food and waterborne diseases. In this study we performed a sensitivity analysis for the KINEROS/STWIR model developed to predict the FIOs transport out of manured fields to other fields and water bodies in order to identify input variables that control the transport uncertainty. The distributions of model input parameters were set to encompass values found from three-year experiments at the USDA-ARS OPE3 experimental site in Beltsville and publicly available information. Sobol' indices and complementary regression trees were used to perform the global sensitivity analysis of the model and to explore the interactions between model input parameters on the proportion of FIO removed from fields. Regression trees provided a useful visualization of the differences in sensitivity of the model output in different parts of the input variable domain. Environmental controls such as soil saturation, rainfall duration and rainfall intensity had the largest influence in the model behavior, whereas soil and manure properties ranked lower. The field length had only moderate effect on the model output sensitivity to the model inputs. Among the manure-related properties the parameter determining the shape of the FIO release kinetic curve had the largest influence on the removal of FIOs from the fields. That underscored the need to better characterize the FIO release kinetics. Since the most sensitive model inputs are available in soil and weather databases or can be obtained using soil water models, results indicate the opportunity of obtaining large-scale estimates of FIO

Application of oil spill environmental vulnerability analysis to Brazilian road networks for hazardous cargo transportation; Aplicacao do indice de vulnerabilidade rodoviario para transporte de cargas perigosas

Energy Technology Data Exchange (ETDEWEB)

Mattos, M. Beatriz da Costa; Silva Junior, Carlos Leandro da; Almeida, Ana Flavia Oliveira de [Ambipetro Consultoria em Meio Ambiente e Petroleo Ltda., Natal, RN (Brazil)

2008-07-01

Roads provide the main means of transportation in Brazil. According to data from the Brazilian Department of Infrastructure and Transport, 96.2% of the passenger transportation and 61.8% of the cargo transportation are based on road infrastructure. However, three quarters of the Brazilian roads are in terrible, unsatisfactory or generally inadequate condition. Poor road conditions are responsible for a great number of accidents with severe consequences for the population and the environment. Given the importance of this matter, there is a need to develop an intelligent system for automatic classification of social and environmental sensitivity maps in order to support actions that respond to emergencies and to help in transportation planning, especially considering the heavy movement of hazardous cargoes such as petroleum and its derivates. For this, tools such as Geographic Information System (GIS) allow social-environmental and traffic engineering characterization maps to be analyzed on a unified, geo referenced digital base. This way, administrators can estimate which stretches of the network are more environmentally sensitive and which pose greater risks, and therefore draw inferences on the most socially and environmentally vulnerable. Social and environmental vulnerability data not only help in the classification of the areas which pose the greater risks, but also make it possible to decide on emergency support points, creating a culture of prevention in the area of hazardous cargo transportation. The case study on the state of Rio Grande do Norte provides a measure of the importance of such work. The city of Natal - the state capital - and the Guamare petrochemical facility are interconnected by 180 Km Road, on which more than 100 tanker trucks loaded with diesel and its derivates travel every day. This road is classified as in poor conditions and, according to the Brazilian Roads Police, it is one of the most dangerous. The relevance of this work is to show

Ground-water solute transport modeling using a three-dimensional scaled model

International Nuclear Information System (INIS)

Crider, S.S.

1987-01-01

Scaled models are used extensively in current hydraulic research on sediment transport and solute dispersion in free surface flows (rivers, estuaries), but are neglected in current ground-water model research. Thus, an investigation was conducted to test the efficacy of a three-dimensional scaled model of solute transport in ground water. No previous results from such a model have been reported. Experiments performed on uniform scaled models indicated that some historical problems (e.g., construction and scaling difficulties; disproportionate capillary rise in model) were partly overcome by using simple model materials (sand, cement and water), by restricting model application to selective classes of problems, and by physically controlling the effect of the model capillary zone. Results from these tests were compared with mathematical models. Model scaling laws were derived for ground-water solute transport and used to build a three-dimensional scaled model of a ground-water tritium plume in a prototype aquifer on the Savannah River Plant near Aiken, South Carolina. Model results compared favorably with field data and with a numerical model. Scaled models are recommended as a useful additional tool for prediction of ground-water solute transport

Sediment transport modelling in a distributed physically based hydrological catchment model

Directory of Open Access Journals (Sweden)

M. Konz

2011-09-01

Full Text Available Bedload sediment transport and erosion processes in channels are important components of water induced natural hazards in alpine environments. A raster based distributed hydrological model, TOPKAPI, has been further developed to support continuous simulations of river bed erosion and deposition processes. The hydrological model simulates all relevant components of the water cycle and non-linear reservoir methods are applied for water fluxes in the soil, on the ground surface and in the channel. The sediment transport simulations are performed on a sub-grid level, which allows for a better discretization of the channel geometry, whereas water fluxes are calculated on the grid level in order to be CPU efficient. Several transport equations as well as the effects of an armour layer on the transport threshold discharge are considered. Flow resistance due to macro roughness is also considered. The advantage of this approach is the integrated simulation of the entire basin runoff response combined with hillslope-channel coupled erosion and transport simulation. The comparison with the modelling tool SETRAC demonstrates the reliability of the modelling concept. The devised technique is very fast and of comparable accuracy to the more specialised sediment transport model SETRAC.

Numerical Modelling Approaches for Sediment Transport in Sewer Systems

DEFF Research Database (Denmark)

Mark, Ole

A study of the sediment transport processes in sewers has been carried out. Based on this study a mathematical modelling system has been developed to describe the transport processes of sediments and dissolved matter in sewer systems. The modelling system consists of three sub-models which...... constitute the basic modelling system necessary to give a discription of the most dominant physical transport processes concerning particles and dissolved matter in sewer systems: A surface model. An advection-dispersion model. A sediment transport model....

Draft Environmental Impact Statement for the Nevada Test Site and off-site locations in the State of Nevada. Volume 1, Appendix I: Transportation study

International Nuclear Information System (INIS)

1996-01-01

This report has been prepared to address local issues concerning current and potential operations at the Nevada Test Site (NTS), to document the results of the NTS transportation risk analysis, and to provide information and supporting documentation for the NTS Environmental Impact Statement (EIS). Stakeholders have identified transportation, health, and safety issues as their paramount concern. In response to these concerns, the US Department of Energy, Nevada Operations Office (DOE/NV) solicited and received input from the public through public meetings and in meetings with federal, state, local, and tribal organizations; and commissioned a transportation risk analysis. The stakeholders and DOE went on to establish the Transportation Protocol Working Group and Big Group to further discuss transportation issues associated with NTS transportation activities. This study used two different models: ADROIT for Defense Program activities and a RADTRAN-like model for waste management activities. Because of national security concerns associated with special nuclear material, the DOE has developed ADROIT to assist in defining the potential risk associated with Defense Program transportation activities. RADTRAN is a computer model which analyzes data without exposing the steps taken to reach the end result. So the public could see every step in the process, a RADTRAN-like model was used. This model is composed of a combination of spreadsheet and FORTRAN codes, that can be used by the stakeholder on a personal computer. This model is available to the public upon request. A detailed discussion of the results of the model are contained in this Appendix

Characterising performance of environmental models

NARCIS (Netherlands)

Bennett, N.D.; Croke, B.F.W.; Guariso, G.; Guillaume, J.H.A.; Hamilton, S.H.; Jakeman, A.J.; Marsili-Libelli, S.; Newham, L.T.H.; Norton, J.; Perrin, C.; Pierce, S.; Robson, B.; Seppelt, R.; Voinov, A.; Fath, B.D.; Andreassian, V.

2013-01-01

In order to use environmental models effectively for management and decision-making, it is vital to establish an appropriate level of confidence in their performance. This paper reviews techniques available across various fields for characterising the performance of environmental models with focus

Transport simulations TFTR: Theoretically-based transport models and current scaling

International Nuclear Information System (INIS)

Redi, M.H.; Cummings, J.C.; Bush, C.E.; Fredrickson, E.; Grek, B.; Hahm, T.S.; Hill, K.W.; Johnson, D.W.; Mansfield, D.K.; Park, H.; Scott, S.D.; Stratton, B.C.; Synakowski, E.J.; Tang, W.M.; Taylor, G.

1991-12-01

In order to study the microscopic physics underlying observed L-mode current scaling, 1-1/2-d BALDUR has been used to simulate density and temperature profiles for high and low current, neutral beam heated discharges on TFTR with several semi-empirical, theoretically-based models previously compared for TFTR, including several versions of trapped electron drift wave driven transport. Experiments at TFTR, JET and D3-D show that I p scaling of τ E does not arise from edge modes as previously thought, and is most likely to arise from nonlocal processes or from the I p -dependence of local plasma core transport. Consistent with this, it is found that strong current scaling does not arise from any of several edge models of resistive ballooning. Simulations with the profile consistent drift wave model and with a new model for toroidal collisionless trapped electron mode core transport in a multimode formalism, lead to strong current scaling of τ E for the L-mode cases on TFTR. None of the theoretically-based models succeeded in simulating the measured temperature and density profiles for both high and low current experiments

Particle size - An important factor in environmental consequence modeling

International Nuclear Information System (INIS)

Yuan, Y.C.; MacFarlane, D.

1991-01-01

Most available environmental transport and dosimetry codes for radiological consequence analysis are designed primarily for estimating dose and health consequences to specific off-site individuals as well as the population as a whole from nuclear facilities operating under either normal or accident conditions. Models developed for these types of analyses are generally based on assumptions that the receptors are at great distances (several kilometers), and the releases are prolonged and filtered. This allows the use of simplified approaches such as averaged meteorological conditions and the use of a single (small) particle size for atmospheric transport and dosimetry analysis. Source depletion from particle settling, settle-out, and deposition is often ignored. This paper estimates the effects of large particles on the resulting dose consequences from an atmospheric release. The computer program AI-RISK has been developed to perform multiparticle-sized atmospheric transport, dose, and pathway analyses for estimating potential human health consequences from the accidental release of radioactive materials. The program was originally developed to facilitate comprehensive analyses of health consequences, ground contamination, and cleanup associated with possible energetic chemical reactions in high-level radioactive waste (HLW) tanks at a US Department of Energy site

Assessment of transport performance index for urban transport development strategies — Incorporating residents' preferences

Energy Technology Data Exchange (ETDEWEB)

Ambarwati, Lasmini, E-mail: L.Ambarwati@tudelft.nl [Department of Transport and Planning, TU Delft (Netherlands); Department of Civil Engineering, Brawijaya University (Indonesia); Verhaeghe, Robert, E-mail: R.Verhaeghe@tudelft.nl [Department of Transport and Planning, TU Delft (Netherlands); Arem, Bart van, E-mail: B.vanArem@tudelft.nl [Department of Transport and Planning, TU Delft (Netherlands); Pel, Adam J., E-mail: A.J.Pel@tudelft.nl [Department of Transport and Planning, TU Delft (Netherlands)

2017-03-15

The performance of urban transport depends on a variety of factors related to metropolitan structure; in particular, the patterns of commuting, roads and public transport (PT) systems. To evaluate urban transport planning efforts, there is a need for a metric expressing the aggregate performance of the city's transport systems which should relate to residents' preferences. The existing metrics have typically focused on a measure to express the proximity of job locations to residences. A Transport Performance Index (TPI) is proposed in which the total cost of transportation system (operational and environmental costs) is divided by willingness to pay (WTP) for transport plus the willingness to accept (WTA) the environmental effects on residents. Transport operational as well as the environmental costs are derived from a simulation of all transport systems, to particular designs of spatial development. Willingness to pay for transport and willingness to accept the environmental effects are derived from surveys among residents. Simulations were modelled of Surabaya's spatial structure and public transport expansion. The results indicate that the current TPI is high, which will double by 2030. With a hypothetical polycentric city structure and adjusted job housing balance, a lower index occurs because of the improvements in urban transport performance. A low index means that the residents obtain much benefit from the alternative proposed. This illustrates the importance of residents' preferences in urban spatial planning in order to achieve efficient urban transport. Applying the index suggests that city authorities should provide fair and equitable public transport systems for suburban residents in the effort to control the phenomenon of urban sprawl. This index is certainly a good tool and prospective benchmark for measuring sustainability in relation to urban development.

Assessment of transport performance index for urban transport development strategies — Incorporating residents' preferences

International Nuclear Information System (INIS)

Ambarwati, Lasmini; Verhaeghe, Robert; Arem, Bart van; Pel, Adam J.

2017-01-01

The performance of urban transport depends on a variety of factors related to metropolitan structure; in particular, the patterns of commuting, roads and public transport (PT) systems. To evaluate urban transport planning efforts, there is a need for a metric expressing the aggregate performance of the city's transport systems which should relate to residents' preferences. The existing metrics have typically focused on a measure to express the proximity of job locations to residences. A Transport Performance Index (TPI) is proposed in which the total cost of transportation system (operational and environmental costs) is divided by willingness to pay (WTP) for transport plus the willingness to accept (WTA) the environmental effects on residents. Transport operational as well as the environmental costs are derived from a simulation of all transport systems, to particular designs of spatial development. Willingness to pay for transport and willingness to accept the environmental effects are derived from surveys among residents. Simulations were modelled of Surabaya's spatial structure and public transport expansion. The results indicate that the current TPI is high, which will double by 2030. With a hypothetical polycentric city structure and adjusted job housing balance, a lower index occurs because of the improvements in urban transport performance. A low index means that the residents obtain much benefit from the alternative proposed. This illustrates the importance of residents' preferences in urban spatial planning in order to achieve efficient urban transport. Applying the index suggests that city authorities should provide fair and equitable public transport systems for suburban residents in the effort to control the phenomenon of urban sprawl. This index is certainly a good tool and prospective benchmark for measuring sustainability in relation to urban development.

Transportation Sector Model of the National Energy Modeling System. Volume 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-01-01

This report documents the objectives, analytical approach and development of the National Energy Modeling System (NEMS) Transportation Model (TRAN). The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated by the model. The NEMS Transportation Model comprises a series of semi-independent models which address different aspects of the transportation sector. The primary purpose of this model is to provide mid-term forecasts of transportation energy demand by fuel type including, but not limited to, motor gasoline, distillate, jet fuel, and alternative fuels (such as CNG) not commonly associated with transportation. The current NEMS forecast horizon extends to the year 2010 and uses 1990 as the base year. Forecasts are generated through the separate consideration of energy consumption within the various modes of transport, including: private and fleet light-duty vehicles; aircraft; marine, rail, and truck freight; and various modes with minor overall impacts, such as mass transit and recreational boating. This approach is useful in assessing the impacts of policy initiatives, legislative mandates which affect individual modes of travel, and technological developments. The model also provides forecasts of selected intermediate values which are generated in order to determine energy consumption. These elements include estimates of passenger travel demand by automobile, air, or mass transit; estimates of the efficiency with which that demand is met; projections of vehicle stocks and the penetration of new technologies; and estimates of the demand for freight transport which are linked to forecasts of industrial output. Following the estimation of energy demand, TRAN produces forecasts of vehicular emissions of the following pollutants by source: oxides of sulfur, oxides of nitrogen, total carbon, carbon dioxide, carbon monoxide, and volatile organic compounds.

Perceived environmental correlates of physical activity for leisure and transportation in Curitiba, Brazil.

Science.gov (United States)

Parra, Diana C; Hoehner, Christine M; Hallal, Pedro C; Ribeiro, Isabela C; Reis, Rodrigo; Brownson, Ross C; Pratt, Michael; Simoes, Eduardo J

2011-01-01

Physical activity (PA) has consistently been associated with perceived environmental characteristics. To examine the association between perceived environmental attributes and various forms of PA in Curitiba, Brazil. A cross-sectional phone survey of adults was conducted in 2008 (n=2097). The questionnaire included environmental perceptions and PA. Principal components analysis was used to identify groups of perceived environmental attributes. Multivariate methods tested the associations of PA with perceived environment characteristics. Perceptions of moderate and high personal safety were positively associated with walking for transportation (53.0%, 53.1% vs. 47.3%, both adjusted ORs [aOR]=1.5). Number of destinations within a 10-minute walk (4 and >6 vs. transportation (7.8%, 9.9% vs.4.8%, aOR=2.5). Perception of high accessibility was positively associated with MVPA during leisure time (35.1% vs. 19.1, aOR=1.7) and meeting recommendations for total PA (58.7% vs. 45.1%, aOR=1.4). Perception of high quality of the pedestrian space (57.3% vs. 46.5%, aOR=1.4) and moderate levels of personal safety (54.3% vs. 47.6%, aOR=1.3) were also positively associated with meeting recommendations for total PA. Different environmental attributes were associated with different PA outcomes, suggesting that these relationships are complex and may differ from those in high-income countries. Copyright © 2010 Elsevier Inc. All rights reserved.

Conceptual and Numerical Models for UZ Flow and Transport

International Nuclear Information System (INIS)

Liu, H.

2000-01-01

The purpose of this Analysis/Model Report (AMR) is to document the conceptual and numerical models used for modeling of unsaturated zone (UZ) fluid (water and air) flow and solute transport processes. This is in accordance with ''AMR Development Plan for U0030 Conceptual and Numerical Models for Unsaturated Zone (UZ) Flow and Transport Processes, Rev 00''. The conceptual and numerical modeling approaches described in this AMR are used for models of UZ flow and transport in fractured, unsaturated rock under ambient and thermal conditions, which are documented in separate AMRs. This AMR supports the UZ Flow and Transport Process Model Report (PMR), the Near Field Environment PMR, and the following models: Calibrated Properties Model; UZ Flow Models and Submodels; Mountain-Scale Coupled Processes Model; Thermal-Hydrologic-Chemical (THC) Seepage Model; Drift Scale Test (DST) THC Model; Seepage Model for Performance Assessment (PA); and UZ Radionuclide Transport Models

Particle Tracking Model and Abstraction of Transport Processes

International Nuclear Information System (INIS)

Robinson, B.

2000-01-01

The purpose of the transport methodology and component analysis is to provide the numerical methods for simulating radionuclide transport and model setup for transport in the unsaturated zone (UZ) site-scale model. The particle-tracking method of simulating radionuclide transport is incorporated into the FEHM computer code and the resulting changes in the FEHM code are to be submitted to the software configuration management system. This Analysis and Model Report (AMR) outlines the assumptions, design, and testing of a model for calculating radionuclide transport in the unsaturated zone at Yucca Mountain. In addition, methods for determining colloid-facilitated transport parameters are outlined for use in the Total System Performance Assessment (TSPA) analyses. Concurrently, process-level flow model calculations are being carrier out in a PMR for the unsaturated zone. The computer code TOUGH2 is being used to generate three-dimensional, dual-permeability flow fields, that are supplied to the Performance Assessment group for subsequent transport simulations. These flow fields are converted to input files compatible with the FEHM code, which for this application simulates radionuclide transport using the particle-tracking algorithm outlined in this AMR. Therefore, this AMR establishes the numerical method and demonstrates the use of the model, but the specific breakthrough curves presented do not necessarily represent the behavior of the Yucca Mountain unsaturated zone

Different fuelling technologies for urban transport bus service in an Italian big town: economic, environmental and social considerations

International Nuclear Information System (INIS)

Santarelli, M.G.L.; Cali, M.; Bertonasco, A.

2003-01-01

In the energy field, an important cause of pollutant emissions is linked to ground transportation. The increase of the ratio between energy consumption due to transport and the gross internal product has been 1.12% per year from 1970. All these energy consumption increases have been made while using fossil fuel with serious environmental consequences on the local and global scale and reduction of fuel availability. Environmental policy points towards improvement by cleaner fuels utilisation and increase of engine efficiencies. In this paper, a specific application will be discussed concerning the public transport service in an Italian urban area: a bus fleet motorised with fuel cell systems will be compared with traditional buses using fossil fuels. The comparison will be done in energy, economic, environmental and social terms

Transport, spatio-economic equilibrium and global sustainability. Markets, technology and policy

Energy Technology Data Exchange (ETDEWEB)

Verhoef, E.T.; Van den Bergh, J.C.J.M. [Dep. of Spatial Economics. Fac. of Economics and Econometrics. Vrije Univ., Amsterdam (Netherlands)

1995-03-01

Interdependencies between transport, spatial economy, technology and environment are investigated in the context of regulatory environmental policies aiming at meeting a global environmental target, defined in terms of the environmental utilization space as a prerequisite for global sustainability. A small scale model, based on the adapted spatial price equilibrium methodology presented elsewhere was discussed, serving as an illustration of the formal analysis discussed there. Notwithstanding the model`s simplicity, the simulation results are found to be interesting in that they provide some revealing comparative static insights into issues that are believed to be quite important in the formulation of environmental and transport policies. 12 figs., 12 refs.

Mass-conserving tracer transport modelling on a reduced latitude-longitude grid with NIES-TM

Directory of Open Access Journals (Sweden)

D. Belikov

2011-03-01

Full Text Available The need to perform long-term simulations with reasonable accuracy has led to the development of mass-conservative and efficient numerical methods for solving the transport equation in forward and inverse models. We designed and implemented a flux-form (Eulerian tracer transport algorithm in the National Institute for Environmental Studies Transport Model (NIES TM, which is used for simulating diurnal and synoptic-scale variations of tropospheric long-lived constituents, as well as their seasonal and inter-annual variability. Implementation of the flux-form method requires the mass conservative wind fields. However, the model is off-line and is driven by datasets from a global atmospheric model or data assimilation system, in which vertically integrated mass changes are not in balance with the surface pressure tendency and mass conservation is not achieved. To rectify the mass-imbalance, a flux-correction method is employed. To avoid a singularity near the poles, caused by the small grid size arising from the meridional convergence problem, the proposed model uses a reduced latitude–longitude grid scheme, in which the grid size is doubled several times approaching the poles. This approach overcomes the Courant condition in the Polar Regions, maintains a reasonably high integration time-step, and ensures adequate model performance during simulations. To assess the model performance, we performed global transport simulations for SF₆, ²²²Rn, and CO₂. The results were compared with observations available from the World Data Centre for Greenhouse Gases, GLOBALVIEW, and the Hateruma monitoring station, Japan. Overall, the results show that the proposed flux-form version of NIES TM can produce tropospheric tracer transport more realistically than previously possible. The reasons for this improvement are discussed.

Predicting the use of public transportation: a case study from Putrajaya, Malaysia.

Science.gov (United States)

Borhan, Muhamad Nazri; Syamsunur, Deprizon; Akhir, Norliza Mohd; Yazid, Muhamad Razuhanafi Mat; Ismail, Amiruddin; Rahmat, Riza Atiq

2014-01-01

Putrajaya is a new federal administrative capital of Malaysia which has been set to achieve a 70% share of all travels by public transport in the city area. However, the current modal split between the public transport and private transport is 15:85. In order to understand travelers' willingness to use the public transport, a conceptual model has been developed to determine the factors that affect them to use the public transport instead of travelling in their own cars. Various variables such as service quality, environmental impact, attitude, and behavior intention were analyzed and tested using structural equation model (SEM). Results indicate that the service quality and attitude are found to have positive effects on the behavioral intention of taking the public transport. Other than this, this study also shows that the service quality and environmental impact have some positive influences on the attitude to using the public transport. However, environmental impact has no significant, positive, and direct effect on behavioral intention. The results of this study demonstrate that the model that was developed is useful in predicting the public transport and it could provide a more complete understanding of behavioral intention towards public transport use.

Which environmental factors most strongly influence a street's appeal for bicycle transport among adults? A conjoint study using manipulated photographs.

Science.gov (United States)

Mertens, Lieze; Van Dyck, Delfien; Ghekiere, Ariane; De Bourdeaudhuij, Ilse; Deforche, Benedicte; Van de Weghe, Nico; Van Cauwenberg, Jelle

2016-09-01

Micro-environmental factors (specific features within a streetscape), instead of macro-environmental factors (urban planning features), are more feasible to modify in existing neighborhoods and thus more practical to target for environmental interventions. Because it is often not possible to change the whole micro-environment at once, the current study aims to determine which micro-environmental factors should get the priority to target in physical environmental interventions increasing bicycle transport. Additionally, interaction effects among micro-environmental factors on the street's appeal for bicycle transport will be determined. In total, 1950 middle-aged adults completed a web-based questionnaire consisting of a set of 12 randomly assigned choice tasks with manipulated photographs. Seven micro-environmental factors (type of cycle path, speed limit, speed bump, vegetation, evenness of the cycle path surface, general upkeep and traffic density) were manipulated in each photograph. Conjoint analysis was used to analyze the data. Providing streets with a cycle path separated from motorized traffic seems to be the best strategy to increase the street's appeal for adults' bicycle transport. If this adjustment is not practically feasible, micro-environmental factors related to safety (i.e. speed limit, traffic density) may be more effective in promoting bicycle transport than micro-environmental factors related to comfort (i.e. evenness of the cycle path surface) or aesthetic (i.e. vegetation, general upkeep). On the other hand, when a more separated cycle path is already provided, micro-environmental factors related to comfort or aesthetic appeared to become more prominent. Findings obtained from this research could provide advice to physical environmental interventions about which environmental factors should get priority to modify in different environmental situations. The study was approved by the Ethics Committee of the Ghent University Hospital. B

Addressing the complexity of water chemistry in environmental fate modeling for engineered nanoparticles.

Science.gov (United States)

Sani-Kast, Nicole; Scheringer, Martin; Slomberg, Danielle; Labille, Jérôme; Praetorius, Antonia; Ollivier, Patrick; Hungerbühler, Konrad

2015-12-01

Engineered nanoparticle (ENP) fate models developed to date - aimed at predicting ENP concentration in the aqueous environment - have limited applicability because they employ constant environmental conditions along the modeled system or a highly specific environmental representation; both approaches do not show the effects of spatial and/or temporal variability. To address this conceptual gap, we developed a novel modeling strategy that: 1) incorporates spatial variability in environmental conditions in an existing ENP fate model; and 2) analyzes the effect of a wide range of randomly sampled environmental conditions (representing variations in water chemistry). This approach was employed to investigate the transport of nano-TiO2 in the Lower Rhône River (France) under numerous sets of environmental conditions. The predicted spatial concentration profiles of nano-TiO2 were then grouped according to their similarity by using cluster analysis. The analysis resulted in a small number of clusters representing groups of spatial concentration profiles. All clusters show nano-TiO2 accumulation in the sediment layer, supporting results from previous studies. Analysis of the characteristic features of each cluster demonstrated a strong association between the water conditions in regions close to the ENP emission source and the cluster membership of the corresponding spatial concentration profiles. In particular, water compositions favoring heteroaggregation between the ENPs and suspended particulate matter resulted in clusters of low variability. These conditions are, therefore, reliable predictors of the eventual fate of the modeled ENPs. The conclusions from this study are also valid for ENP fate in other large river systems. Our results, therefore, shift the focus of future modeling and experimental research of ENP environmental fate to the water characteristic in regions near the expected ENP emission sources. Under conditions favoring heteroaggregation in these

A Sediment Transport Model for Sewers

DEFF Research Database (Denmark)

Mark, Ole; Larsson, Johan; Larsen, Torben

1993-01-01

This paper describes a mathematical model for transport processes in sewers. The model consists of three sub models, a surface model for the description of the buildup and the washoff of sediment particles from the surface area, a morphological model and an advection-dispersion model. The model i...... is being developed as a part of a study being carried out at the University of Aalborg, Denmark and VBB VIAK, Sweden. The project is funded by the Swedish Water and Waste Water Works Association and the Nordic Industrial Foundation.......This paper describes a mathematical model for transport processes in sewers. The model consists of three sub models, a surface model for the description of the buildup and the washoff of sediment particles from the surface area, a morphological model and an advection-dispersion model. The model...

Transport of sulfadiazine in soil columns — Experiments and modelling approaches

Science.gov (United States)

Wehrhan, Anne; Kasteel, Roy; Simunek, Jirka; Groeneweg, Joost; Vereecken, Harry

2007-01-01

Antibiotics, such as sulfadiazine, reach agricultural soils directly through manure of grazing livestock or indirectly through the spreading of manure or sewage sludge on the field. Knowledge about the fate of antibiotics in soils is crucial for assessing the environmental risk of these compounds, including possible transport to the groundwater. Transport of 14C-labelled sulfadiazine was investigated in disturbed soil columns at a constant flow rate of 0.26 cm h - 1 near saturation. Sulfadiazine was applied in different concentrations for either a short or a long pulse duration. Breakthrough curves of sulfadiazine and the non-reactive tracer chloride were measured. At the end of the leaching period the soil concentration profiles were determined. The peak maxima of the breakthrough curves were delayed by a factor of 2 to 5 compared to chloride and the decreasing limbs are characterized by an extended tailing. However, the maximum relative concentrations differed as well as the eluted mass fractions, ranging from 18 to 83% after 500 h of leaching. To identify relevant sorption processes, breakthrough curves of sulfadiazine were fitted with a convective-dispersive transport model, considering different sorption concepts with one, two and three sorption sites. Breakthrough curves can be fitted best with a three-site sorption model, which includes two reversible kinetic and one irreversible sorption site. However, the simulated soil concentration profiles did not match the observations for all of the used models. Despite this incomplete process description, the obtained results have implications for the transport behavior of sulfadiazine in the field. Its leaching may be enhanced if it is frequently applied at higher concentrations.

Modelling impact of climate change on atmospheric transport and fate of persistent organic pollutants in the Arctic

Science.gov (United States)

Hansen, K. M.; Christensen, J. H.; Geels, C.; Silver, J. D.; Brandt, J.

2015-03-01

The Danish Eulerian Hemispheric Model (DEHM) was applied to investigate how projected climate changes will affect the atmospheric transport of 13 persistent organic pollutants (POPs) to the Artic and their environmental fate within the Arctic. Two sets of simulations were performed, one with initial environmental concentrations from a 20 year spin-up simulation and one with initial environmental concentrations set to zero. Each set of simulations consisted of two ten-year time slices representing the present (1990-2000) and future (2090-2100) climate conditions. The same POP emissions were applied in all simulations to ensure that the difference in predicted concentrations for each set of simulations only arises from the difference in climate input. DEHM was driven using meteorological input from the global circulation model, ECHAM/MPI-OM, simulating the SRES A1B climate scenario. Under the applied climate and emission scenarios, the total mass of all compounds was predicted to be up to 20% higher across the Northern Hemisphere. The mass of HCHs within the Arctic was predicted to be up to 39% higher, whereas the change in mass of the PCBs was predicted to range from 14% lower to 17% higher depending on the congener and the applied initial environmental concentrations. The results of this study also indicate that contaminants with no or a short emission history will be more rapidly transported to and build up in the arctic environment in a future warmer climate. The process that dominates the environmental behaviour of POPs in the Arctic under a future warmer climate scenario is the shift in mass of POPs from the surface media to the atmosphere induced by the higher mean temperature. This is to some degree counteracted by higher degradation rates also following the higher mean temperature. The more dominant of these two processes depend on the physical-chemical properties of the compounds. Previous model studies have predicted that the effect of a changed climate on

The Influence of Urban Land-Use and Public Transport Facilities on Active Commuting in Wellington, New Zealand: Active Transport Forecasting Using the WILUTE Model

Directory of Open Access Journals (Sweden)

Joreintje Dingena Mackenbach

2016-03-01

Full Text Available Physical activity has numerous physical and mental health benefits, and active commuting (walking or cycling to work can help meet physical activity recommendations. This study investigated socioeconomic differences in active commuting, and assessed the impact of urban land-use and public transport policies on active commuting in the Wellington region in New Zealand. We combined data from the New Zealand Household Travel Survey and GIS data on land-use and public transport facilities with the Wellington Integrated Land-Use, Transportation and Environment (WILUTE model, and forecasted changes in active commuter trips associated with changes in the built environment. Results indicated high income individuals were more likely to commute actively than individuals on low income. Several land-use and transportation factors were associated with active commuting and results from the modelling showed a potential increase in active commuting following an increase in bus frequency and parking fees. In conclusion, regional level policies stimulating environmental factors that directly or indirectly affect active commuting may be a promising strategy to increase population level physical activity. Access to, and frequency of, public transport in the neighbourhood can act as a facilitator for a more active lifestyle among its residents without negatively affecting disadvantaged groups.

Modeling electrokinetic transport in phenol contaminated soils

Energy Technology Data Exchange (ETDEWEB)

Zorn, R.; Haus, R.; Czurda, K. [Dept. of Applied Geology, Univ. Karlsruhe (Germany)

2001-07-01

Numerical simulations are compared to laboratory experiments of electroremediation in soils contaminated by phenolic pollutants. The developing pH affects the electrokinetic transport behaviour of phenol. It is found that a water chemistry model must be included in an electrokinetic mass transport model to describe the process of electroremediation more accurately, if no buffering system is used at the electrodes. In the case of controlling the pH at the electrode compartments only a simplified chemical reaction model must be included in the numerical code to match the experimental phenolic transport. (orig.)

Environmentally Sustainable Transport. Implementation and Impacts for the Netherlands for 2030

International Nuclear Information System (INIS)

Van Wee, G.P.; Geurs, K.T.

2000-02-01

Dutch transport scenarios for the OECD project on Environmental Sustainable Transport (EST) are described in this Phase 3 report of the project. The EST project contains a business-as-usual scenario (BAU) and three EST scenarios which attain the EST criteria (i.e. a reduction of CO2 by 80%, NOx by 90%, VOC by 90%, PM10 by 90%): (1) a 'high-technology' scenario containing only technological changes, (2) a 'mobility-management' scenario containing only mobility changes, (3) a combination scenario containing a combination of technological and mobility changes. Furthermore, the report describes possible instrument packages for the implementation of EST and the social and economic impacts of EST. The main conclusions are: (1) only if a high increase in technological developments and/or very stringent behaviour adaptations and changes in spatial and economic structures at the national and international level are assumed, the EST criteria can be met, (2) if EST is to be realised, measures will have to be taken in the short term and innovative policy instruments must be developed and implemented. The implementation of the tradeable CO2 emission permit system for passenger and freight transport is crucial for the attainment of EST, (3) a timely implementation of the policy instruments for the attainment of EST means that the current policy life cycle must radically change, (4) the level of material wealth (expressed in GDP) and employment will be somewhat slower in EST compared to BAU, but several social factors will improve. Firstly, differences between societal groups in (a) travel behaviour, (b) the level of accessibility of economic and social opportunities and (c) (perceived) environmental quality will decrease. Secondly, the level of motorised transport will be strongly reduced which will improve traffic safety and reduce health problems caused by local air pollution and noise nuisance from road traffic and aviation

A preliminary investigation of the applicability of surface complexation modeling to the understanding of transportation cask weeping

International Nuclear Information System (INIS)

Granstaff, V.E.; Chambers, W.B.; Doughty, D.H.

1994-01-01

A new application for surface complexation modeling is described. These models, which describe chemical equilibria among aqueous and adsorbed species, have typically been used for predicting groundwater transport of contaminants by modeling the natural adsorbents as various metal oxides. Our experiments suggest that this type of modeling can also explain stainless steel surface contamination and decontamination mechanisms. Stainless steel transportation casks, when submerged in a spent fuel storage pool at nuclear power stations, can become contaminated with radionuclides such as 137 Cs, 134 Cs, and 60 Co. Subsequent release or desorption of these contaminants under varying environmental conditions occasionally results in the phenomenon known as open-quotes cask weeping.close quotes We have postulated that contaminants in the storage pool adsorb onto the hydrous metal oxide surface of the passivated stainless steel and are subsequently released (by conversion from a fixed to a removable form) during transportation, due to varying environmental factors, such as humidity, road salt, dirt, and acid rain. It is well known that 304 stainless steel has a chromium enriched passive surface layer; thus its adsorption behavior should be similar to that of a mixed chromium/iron oxide. To help us interpret our studies of reversible binding of dissolved metals on stainless steel surfaces, we have studied the adsorption of Co +2 on Cr 2 O 3 . The data are interpreted using electrostatic surface complexation models. The FITEQL computer program was used to obtain the model binding constants and site densities from the experimental data. The MINTEQA2 computer speciation model was used, with the fitted constants, in an attempt to validate this approach