Environmental and safety aspects. The best of 'powder handling and processing' 1989 - 1997. 'Bulk solids handling' 1992 - 1997 (H/2000)

Energy Technology Data Exchange (ETDEWEB)

Woehlbier, R.H. (ed.)

2000-07-01

The book contains articles published either during 1992-1997 in ''bulk solids handling'' or during 1989-1997 in ''powder handling and processing''. Main topics are aspects of safety and environmental protection in bulk solids handling: dusts, hazardous powders, prevention and mitigation of dust explosions, powdered coal handling, dedusting, filters, electrostatic precipitation, materials recovery, occupational safety.(uke)

Safety Aspects in Radioactive Waste Management

Directory of Open Access Journals (Sweden)

Peter W. Brennecke

2007-01-01

Full Text Available In recent years, within the framework of national as well as international programmes, notable advances and considerable experience have been reached, particularly in minimising of the production of radioactive wastes, conditioning and disposal of short-lived, low and intermediate level waste, vitrification of fission product solutions on an industrial scale and engineered storage of long-lived high level wastes, i.e. vitrified waste and spent nuclear fuel. Based on such results, near-surface repositories have successfully been operated in many countries. In contrast to that, the disposal of high level radioactive waste is still a scientific and technical challenge in many countries using the nuclear power for the electricity generation. Siting, planning and construction of repositories for the high level wastes in geological formations are gradually advancing. The site selection, the evaluation of feasible sites as well as the development of safety cases and performance of site-specific safety assessments are essential in preparing the realization of such a repository. In addition to the scientific-technical areas, issues regarding economical, environmental, ethical and political aspects have been considered increasingly during the last years. Taking differences in the national approaches, practices and the constraints into account, it is to be recognised that future developments and decisions will have to be extended in order to include further important aspects and, finally, to enhance the acceptance and confidence in the safety-related planning work as well as in the proposed radioactive waste management and disposal solutions.

Post-mining safety implementations and environmental aspects of abandoned mine sites in Limousin. 2006 status (and perspectives 2007)

International Nuclear Information System (INIS)

2007-01-01

This document summarizes the actions carried out in 2006 at some French abandoned mine sites: 1 - safety implementations and risks abatement in the framework of post-mining actions: coal mines of Ahun (23) and Argentat (19), antimony mines of Biard (87); 2 - remedial actions at the tin/tungsten mine of Puy-les-Vignes (87) and at the gold mine of Chatelet (23); 3 - 2007 post-mining perspectives; 4 - environmental aspects of abandoned mine sites: gold mines of Chatelet (23), Cheni and Bourneix (87), uranium mines of Haute-Vienne (expertise, control of effluents, financial warranties about tailings storage sites maintenance). (J.S.)

Energy recovery from municipal solid waste, an environmental and safety mini-overview survey

Energy Technology Data Exchange (ETDEWEB)

Johnson, R.L.

1976-06-01

The environmental and safety aspects of processing municipal solid wastes to recover energy and materials are reviewed in some detail. The state of the art in energy recovery, energy potential for the near and long-term, and constraints to commercialization are discussed. Under the environmental and safety aspects the state of the art, need for research and development, and need for coordination among federal agencies and private industry are considered. Eleven principal types of refuse-to-energy processes are described and a projected energy balance is derived for each process. (JSR)

Safety Aspects of Radioactive Waste Management in Different Nuclear Fuel Cycle Policies, a Comparative Study

International Nuclear Information System (INIS)

Gad Allah, A.A.

2009-01-01

With the increasing demand of energy worldwide, and due to the depletion of conventional natural energy resources, energy policies in many countries have been devoted to nuclear energy option. On the other hand, adopting a safe and reliable nuclear fuel cycle concept guarantees future nuclear energy sustain ability is a vital request from environmental and economic point of views. The safety aspects of radioactive waste management in the nuclear fuel cycle is a topic of great importance relevant to public acceptance of nuclear energy and the development of nuclear technology. As a part of nuclear fuel cycle safety evaluation studies in the department of nuclear fuel cycle safety, National Center for Nuclear Safety and Radiation Control (NCNSRC), this study evaluates the radioactive waste management policies and radiological safety aspects of three different nuclear fuel cycle policies. The once-through fuel cycle (OT- fuel cycle) or the direct spent fuel disposal concept for both pressurized light water reactor ( PWR) and pressurized heavy water reactor (PHWR or CANDU) systems and the s elf-generated o r recycling fuel cycle concept in PWR have been considered in the assessment. The environmental radiological safety aspects of different nuclear fuel cycle options have been evaluated and discussed throughout the estimation of radioactive waste generated from spent fuel from these fuel cycle options. The decay heat stored in the spent fuel was estimated and a comparative safety study between the three fuel cycle policies has been implemented

SOME ASPECTS OF FEATURES CONCEPT AND NATURE OF ENVIRONMENTAL SAFETY LIFE URBAN POPULATION

Directory of Open Access Journals (Sweden)

Kirova M.

2017-05-01

Full Text Available Proved the concept and nature of the environmental safety of life of the urban population. A structural levels in the list of objects to enter the security levels of urban or rural communities of local communities, which changes the nature of the institutional environment environmental security. In assessing the quality of life of urban society used many parameters of socio-economic and environmental. General rules on the prevention of environmental degradation and risks to human health set forth in the applicable law "On Environmental Protection", on the basis of which developed a number of legal documents. As for the capital of Ukraine - Kyiv, it is a great cultural, historical and commercial and industrial center. So we can safely say that Kyiv is characterized by all the environmental problems that are inherent in all large cities. This, above all, traffic pollution, changes in the air quality, noise pollution, emissions of chemicals into the atmosphere, pollution, toxic waste, the problem of waste. But a special place in this region occupies a radioactive problem due to the Chernobyl nuclear power plant. Also, nearby, in the Kyiv region Kiev reservoir are with not the best environmental conditions. The most important components of ecosystems: the air of the city, urban and suburban water sources, soil city. International experts conducted a study in 215 cities around the world. Kyiv international ranking is 29 in place pollution. Thus, the problem of environmental security for the population of the city. Kyiv, as many large cities in Ukraine is quite relevant. In this regard, the article studies that the environmental safety of life of the urban population in the context of national security - a state of effective security systems (environment interconnected structural levels of the individual, the local community, society, state and international (global community of aggregate factors that endanger or threaten the very existence of which

Modern Aspects of Safety Assessment of Foodstuff

Directory of Open Access Journals (Sweden)

Tetiana Chorna

2018-04-01

Full Text Available Food safety is one of the decisive components of the economic security of each state and is determined by the ability of the country to control effectively the production and import of safe and high-quality food on the generally accepted principles of the world. This sphere of activity in human society has extremely important humanitarian, social, economic and political aspects. The food raw materials and food products quality and safety control is currently the most relevant analytical task. It is more important than environmental pollution, according to some data, more than 70 % of harmful pollutants in the human body gets through food, 20% of water and 10 % of the air. Technogenic pollution of the environment through soil, water and air gets directly into the food. However, food products are contaminated with natural harmful substances that appear in improper storage, in violation of technologies, food processing and processing charts. The article is devoted to the main factors analysis influencing the safety of food products and the improvement of instrumental methods for the study of quality aromatic products (for example, coffee.

Thermophysical aspects of WWER safety

International Nuclear Information System (INIS)

Kolochko, Vladimir N.

1999-01-01

The paper presents a review of the main thermophysical aspects of NPPs safety and efficiency increase applied to WWERs. Improvement of operating WWER units is the main short-term and medium-term tasks of the utilities in Ukraine. The new generation of reactors for increasing the reactor facilities efficiency should utilize achievements of thermo physics research results. The thermophysical aspects of NPPs safety and efficiency are envisaged in the context of the atomic energy development strategy. The analysis of thermophysical processes occurring in the core shows that a number of problems concerning boiling crisis and heat exchange intensification during transient and accidents are not solved in spite of numerous calculations and experimental research. The up-to-date safety conception includes severe accidents consideration for safety assessment. Review of severe accidents management is presented. Additional validation of the West advanced thermal hydraulic codes which are applied for WWERs reassessment calculations is required. Contribution of the processes which might occur in WWER containment to safety problems solving is considered as well. (author)

19th JANNAF Safety and Environmental Protection Subcommittee Meeting. Volume 1

Science.gov (United States)

Cocchiaro, J. E. (Editor); Becker, D. L. (Editor)

2002-01-01

This volume, the first of two volumes, is a compilation of 22 unclassified/unlimited technical papers presented at the 19th Joint Army-Navy-NASA-Air Force (JANNAF) Safety & Environmental Protection Subcommittee Meeting. The meeting was held 18-21 March 2002 at the Sheraton Colorado Springs Hotel, Colorado Springs, Colorado. Topics covered include green energetic materials and life cycle pollution prevention; space launch range safety; propellant/munitions demilitarization, recycling, and reuse: and environmental and occupational health aspects of propellants and energetic materials.

Inland Waterway Environmental Safety

Science.gov (United States)

Reshnyak, Valery; Sokolov, Sergey; Nyrkov, Anatoliy; Budnik, Vlad

2018-05-01

The article presents the results of development of the main components of the environmental safety when operating vessels on inland waterways, which include strategy selection ensuring the environmental safety of vessels, the selection and justification of a complex of environmental technical means, activities to ensure operation of vessels taking into account the environmental technical means. Measures to ensure environmental safety are developed on the basis of the principles aimed at ensuring environmental safety of vessels. They include the development of strategies for the use of environmental protection equipment, which are determined by the conditions for wastewater treatment of purified sewage and oily bilge water as well as technical characteristics of the vessels, the introduction of the process of the out-of-the-vessel processing of ship pollution as a technology for their movement. This must take into account the operating conditions of vessels on different sections of waterways. An algorithm of actions aimed at ensuring ecological safety of operated vessels is proposed.

Preliminary report on safety aspects on nuclear power generation in Sri Lanka

International Nuclear Information System (INIS)

Jayamanne, D.; Fernando, W.L.W.; Ariyadasa

1988-01-01

This document is intended as background information on nuclear energy to contribute to Sri Lanka's comparative study of alternative sources of energy. This study has considered the safety and environmental effects of nuclear power reactors. Basic concepts of nuclear physics are introduced and providing and appreciation of safety considerations and safety aspects of nuclear power plants and the personnel. Radioactive waste management, storage and disposal are also discussed. Natural radiation levels in Sri Lanka are provided as well as information on biological effects of radiation especially occupational exposure licensing procedures for nuclear power plants are outlined strategy for public awareness of nuclear power is proposed

Environmental Aspects, Objectives and Targets Identification Process

International Nuclear Information System (INIS)

Green, R.

2002-01-01

The purpose of this report is to document the environmental aspects and associated environmental impacts of the Bechtel SAIC Company (BSC) scope of work, evaluate the significance of those environmental aspects based on established criteria, and establish environmental objectives and targets for specific environmental aspects. This report is intended to be used by environmental staff in the evaluation of BSC work packages during the annual risk-based planning process. This report shall be fully reviewed and revised annually during the annual work planning process to reflect changes in BSC operations, facilities, and scope of work. Planned BSC work will be evaluated to determine if the work is covered by a previously defined activity, product or service (see Table 2); if work activities require redefinition or addition of a new activity; and if the significant evaluation for each environment aspect is still valid based on scope of planned work. New workscope initiated during the fiscal year through the Baseline Change Proposal process (i.e., not as part of the annual work plan) also will be reviewed for new environmental aspects and determination of whether the new workscope would change the significance rating of any environmental aspect. If a new environmental aspect is identified in a new work activity, product, or service but the aspect is not determined to be significant (see Section 4), then this report can be changed through an interim change notice (ICN). This report can be changed five times through an ICN before a full revision is required. However, if new workscope causes an environmental aspect to be graded as significant using the evaluation process in Section 4, this report shall be revised though a full review and revision

Environmental, safety, and health engineering

International Nuclear Information System (INIS)

Woodside, G.; Kocurek, D.

1997-01-01

A complete guide to environmental, safety, and health engineering, including an overview of EPA and OSHA regulations; principles of environmental engineering, including pollution prevention, waste and wastewater treatment and disposal, environmental statistics, air emissions and abatement engineering, and hazardous waste storage and containment; principles of safety engineering, including safety management, equipment safety, fire and life safety, process and system safety, confined space safety, and construction safety; and principles of industrial hygiene/occupational health engineering including chemical hazard assessment, personal protective equipment, industrial ventilation, ionizing and nonionizing radiation, noise, and ergonomics

Food safety/food security aspects related to the environmental release of pharmaceuticals.

Science.gov (United States)

Brambilla, Gianfranco; Testa, Cecilia

2014-11-01

The environmental presence of pharmaceuticals in top soil and in water where extensive animal farming occurs may represent an involuntary source of residues in food that might affect both food safety and food security. We modelled the presence of residues in animal matrices from the inventoried environmental concentration of selected drugs in surface waters (range: 0.1-10μgL(-1)) and agriculture soils (range: 1-100μgkg(-1) dry weight), accounting for animal production parameters (i.e., forages, water intake and milk and egg production) and drug pharmacokinetics. The results indicate that the contamination of tetracyclines in top soil may represent a major issue both for the compliance with maximum residue levels in food (100-300ngg(-1)) and for the claim of organic products. via surface water, animals may be vulnerable to the intake of anabolics and growth-promoting agents, such as 17-beta estradiol and clenbuterol, only under a worst-case scenario. Their identification, which is currently achievable at a pgg(-1) level in animal specimens, is considered proof of illegal treatment and can lead to the prosecution of farmers. The Environmental Quality Standards that have been proposed for priority substances in surface waters may also be considered protective in terms of food security/food safety; however, a broad-spectrum characterisation of drugs within the agriculture context could be envisaged to refine the uncertainties in the risk assessment and for combined intakes. Copyright © 2014 Elsevier Ltd. All rights reserved.

Assigment of environmental aspect and impacts

Directory of Open Access Journals (Sweden)

Hanzelová Marcela

2001-12-01

Full Text Available Environmental management system (EMS is a part of the management system that includes the organizational structure, planning activities, responsibilities, practices, procedures, processes and resources for developing, implementing, achieving, reviewing and maintaining the environmental policy. The EMS provides the order and consistency for organizations to adress environmental cocerns through the allocation of resources, assignment of responsibilities, and the ongoing evaluation of practices, procedures and processes. The ISO 14001 requires the implementation of the EMS in accordance with defined, internationally recognized standards. The ISO standard specifies requirements for establishing an environmental policy, determining environmental aspects & impacts of products (activities services, planning environmental objectives and measurable targets, implementation & operation of programs to meet objectives and targets, checking &corrective action, and management review. The Environmental aspect is an element of organization’s activities, product or services that can interact with the environment. A significant environmental aspect is that with a significant environmental impact. The environmental impact is any change to the environment, whether adverse or beneficial wholly or partially resulting from an oranization’s activities, products or services.

Biomedical and environmental aspects of the thorium fuel cycle: a selected, annotated bibliography

International Nuclear Information System (INIS)

Faust, R.A.; Fore, C.S.; Cone, M.V.; Meyer, H.R.; Till, J.E.

1979-07-01

This bibliography was compiled to assist in the evaluation of the health and environmental consequences of high specific activity thorium and related nuclides which could be released to the environment by activities related to the Thorium Fuel Cycle. The general scope covers studies regarding potential releases, environmental transport, metabolism, dosimetry, dose assessment, and overall risk assessment for radionuclides specific to the NASAP project. This publication of 740 abstracted references highlights the biological and medical aspects of thorium 228 and thorium 232 in man and animals. Similar studies on related nuclides such as radium 224, radium 226, radium 228, and thorium 230 are also emphasized. Additional categories relevant to these radionuclides are included as follows: chemical analysis; ecological aspects; energy; geological aspects; instrumentation; legal and political aspects; monitoring, measurement and analysis; physical aspects; production; radiation safety and control; and waste disposal and management. Environmental assessment and sources categories were used for entries which contain a multiple use of categories. Leading authors appear alphabetically within each category. Indexes are provided for : author(s), geographic location, keywords, title, and publication description. The bibliography contains literature dating from December 1925 to February 1978

Biomedical and environmental aspects of the thorium fuel cycle: a selected, annotated bibliography

Energy Technology Data Exchange (ETDEWEB)

Faust, R.A.; Fore, C.S.; Cone, M.V.; Meyer, H.R.; Till, J.E.

1979-07-01

This bibliography was compiled to assist in the evaluation of the health and environmental consequences of high specific activity thorium and related nuclides which could be released to the environment by activities related to the Thorium Fuel Cycle. The general scope covers studies regarding potential releases, environmental transport, metabolism, dosimetry, dose assessment, and overall risk assessment for radionuclides specific to the NASAP project. This publication of 740 abstracted references highlights the biological and medical aspects of thorium 228 and thorium 232 in man and animals. Similar studies on related nuclides such as radium 224, radium 226, radium 228, and thorium 230 are also emphasized. Additional categories relevant to these radionuclides are included as follows: chemical analysis; ecological aspects; energy; geological aspects; instrumentation; legal and political aspects; monitoring, measurement and analysis; physical aspects; production; radiation safety and control; and waste disposal and management. Environmental assessment and sources categories were used for entries which contain a multiple use of categories. Leading authors appear alphabetically within each category. Indexes are provided for : author(s), geographic location, keywords, title, and publication description. The bibliography contains literature dating from December 1925 to February 1978.

Summary of the US Senior Committee on Environmental, Safety, and Economic Aspects of Magnetic Fusion Energy (ESECOM)

International Nuclear Information System (INIS)

Logan, B.G.; Holdren, J.P.; Berwald, D.H.

1988-01-01

ESECOM has completed a recent assessment of the competitive potential of magnetic fusion energy (MFE) compared to present and future fission energy sources giving particular emphasis to the interaction of environmental, safety, and economic characteristics. By consistently applying a set of economic and safety models to a set of MFE concepts using a wide range of possible material choices, power densities, power conversion methods, and fuel cycles, ESECOM finds that several different MFE concepts have the potential to achieve costs of electricity comparable to those of fission systems, coupled with significant safety and environmental advantages. 13 refs., 7 tabs

ADTT safety aspects

International Nuclear Information System (INIS)

Thedeen, T.

1997-01-01

Beside the technical problems of ADTT which remain to be solved it is crucial for the ADTT progress that safety and economical aspects are considered already during the research and planning phases. Safety here stands for the converse of risk, negative consequences for human life and health and the environment together with the corresponding probabilities. The system to be considered includes all phases of an ADTT plant, a life cycle analysis (LCA). The risk analysis is useful for two purposes: comparison with other ways of handling nuclear waste, e.g. geological repository and for valuation of different construction designs. Due to lack of precise plans and adequate data the analysis will be more of a qualitative than quantitative type. The main risks appear in connection with repair and replacement work. 2 refs., 1 fig

Comprehensive classification of environmental aspects in a manufacturing enterprise

Directory of Open Access Journals (Sweden)

B. Gajdzik

2012-10-01

Full Text Available This paper presents a comprehensive approach to classification of environmental aspects with a broad set of criteria which may be useful in a manufacturing enterprise in defining the relevant aspects. Additionally, the publication presents the list of key environmental aspects for metallurgical enterprise. According to standard ISO 14001:2004 process of environmental aspects identification should be planned. The paper finishes with a scheme presenting the place of the environmental aspects identification procedure in the system of environmental management.

Environmental, health and safety aspects of nanotechnology—implications for the R&D in (small companies

Directory of Open Access Journals (Sweden)

Steffi Friedrichs and Jurgen Schulte

2007-01-01

Full Text Available The growth of nanotechnology has led to an unprecedented research and development effort in both the public and the private sectors; world wide, an increasing number of laboratories, fabrication and manufacturing plants develop or apply novel nanometre-sized materials for applications ranging from large-scale industrial materials, to electronic components and healthcare and medical products; an increasing number of start-ups have been launched to establish their nanotechnology-based products in a trillion-dollar market.Very little, however, is known about the interaction of man-made nanostructured materials and living organisms, as studies of nanotoxicology are gaining increasing interest, but are still in their infancy. Despite the formation of many focus and lobbying groups, proper legislation of the environmental, health and safety aspects of nanotechnology will take years to be implemented. In the mean time, it is of utmost importance that companies working with nanometre-sized matter take appropriate precautions to protect their staff, the environment and the customer. Toxicology tests and agency approval of new nanometre-sized materials are prohibitively expensive, but, even if working on a tight budget, nanotechnology companies can achieve an ethical and safe business conduct via a number of possible routes.

Liquefied gaseous fuels safety and environmental control assessment program: a status report

Energy Technology Data Exchange (ETDEWEB)

None

1979-05-01

Progress is reported in research on the safety and environmental aspects of four principal liquefied gaseous material systems: liquefied natural gas (LNG), liquefied petroleum gas (LPG), hydrogen, and ammonia. Each section of the report has been abstracted and indexed individually. (JGB)

Safety and Environment aspects of Tokamak- type Fusion Power Reactor- An Overview

Science.gov (United States)

Doshi, Bharat; Reddy, D. Chenna

2017-04-01

Power Reactor). This paper describes an overview of safety and environmental merits of fusion power reactor, issues and design considerations and need for R&D on safety and environmental aspects of Tokamak type fusion reactor.

Safety Aspects of Bio-Based Nanomaterials.

Science.gov (United States)

Catalán, Julia; Norppa, Hannu

2017-12-01

Moving towards a bio-based and circular economy implies a major focus on the responsible and sustainable utilization of bio-resources. The emergence of nanotechnology has opened multiple possibilities, not only in the existing industrial sectors, but also for completely novel applications of nanoscale bio-materials, the commercial exploitation of which has only begun during the last few years. Bio-based materials are often assumed not to be toxic. However, this pre-assumption is not necessarily true. Here, we provide a short overview on health and environmental aspects associated with bio-based nanomaterials, and on the relevant regulatory requirements. We also discuss testing strategies that may be used for screening purposes at pre-commercial stages. Although the tests presently used to reveal hazards are still evolving, regarding modifi-cations required for nanomaterials, their application is needed before the upscaling or commercialization of bio-based nanomaterials, to ensure the market potential of the nanomaterials is not delayed by uncertainties about safety issues.

Safety Aspects of Bio-Based Nanomaterials

Directory of Open Access Journals (Sweden)

Julia Catalán

2017-12-01

Full Text Available Moving towards a bio-based and circular economy implies a major focus on the responsible and sustainable utilization of bio-resources. The emergence of nanotechnology has opened multiple possibilities, not only in the existing industrial sectors, but also for completely novel applications of nanoscale bio-materials, the commercial exploitation of which has only begun during the last few years. Bio-based materials are often assumed not to be toxic. However, this pre-assumption is not necessarily true. Here, we provide a short overview on health and environmental aspects associated with bio-based nanomaterials, and on the relevant regulatory requirements. We also discuss testing strategies that may be used for screening purposes at pre-commercial stages. Although the tests presently used to reveal hazards are still evolving, regarding modifi­cations required for nanomaterials, their application is needed before the upscaling or commercialization of bio-based nanomaterials, to ensure the market potential of the nanomaterials is not delayed by uncertainties about safety issues.

Optimization method concerning target conflicts between safety aspects and occupational safety aspects in nuclear power plant operations

International Nuclear Information System (INIS)

Mueller, W.

1991-01-01

The simplified cost-benefit analysis has not been considered for applications in nuclear engineering with complex decisions between safety aspects and occupational safety aspects. The extended cost-benefit analysis encounters problems with non-monetary criteria. Solutions are in sight, however with a subjective element. A major problem in implementing the method is the psychological barrier as against an evaluation of human life. The multi-attribute utility analysis overcomes the difficulties of the extended cost-benefit analysis, however, it also creates new problems on account of the complicated construction of the utility functions. The problems are solved most elegantly with the multi-criteria outranking analysis, the only disadvantage possibly being less transparency at first sight. (orig./HP) [de

Operational and environmental safety

International Nuclear Information System (INIS)

Anon.

1978-01-01

The responsibility of the DOE Office of Operational and Environmental Safety is to assure that DOE-controlled activities are conducted in a manner that will minimize risks to the public and employees and will provide protection for property and the environment. The program supports the various energy technologies by identifying and resolving safety problems; developing and issuing safety policies, standards, and criteria; assuring compliance with DOE, Federal, and state safety regulations; and establishing procedures for reporting and investigating accidents in DOE operations. Guidelines for the radiation protection of personnel; radiation monitoring at nuclear facilities; an assessment of criticality accidents by fault tree analysis; and the preparation of environmental, safety, and health standards applicable to geothermal energy development are discussed

Safety and environmental aspects of heavy water production (Paper No. 4.1)

International Nuclear Information System (INIS)

Singh, Mohinder

1992-01-01

Different processes are utilised for heavy water production in the heavy water plants in India. H 2 S is used in large quantities as carrier gas to extract deuterium content from water. The safe handling of such large quantities of H 2 S gas poses a major problem because of its toxicity, high corrosive nature and high flammability. Handling of large quantities of synthesis gas in ammonia based plants at high pressure and temperature poses a major problem because it is a mixture of hydrogen and nitrogen. H 2 is highly inflammable and explosive when mixed with air or oxygen. All the safety aspects considered while designing, fabricating, constructing and operating the plants are described. (author). 5 tabs

Design for safety: theoretical framework of the safety aspect of BIM system to determine the safety index

Directory of Open Access Journals (Sweden)

Ai Lin Evelyn Teo

2016-12-01

Full Text Available Despite the safety improvement drive that has been implemented in the construction industry in Singapore for many years, the industry continues to report the highest number of workplace fatalities, compared to other industries. The purpose of this paper is to discuss the theoretical framework of the safety aspect of a proposed BIM System to determine a Safety Index. An online questionnaire survey was conducted to ascertain the current workplace safety and health situation in the construction industry and explore how BIM can be used to improve safety performance in the industry. A safety hazard library was developed based on the main contributors to fatal accidents in the construction industry, determined from the formal records and existing literature, and a series of discussions with representatives from the Workplace Safety and Health Institute (WSH Institute in Singapore. The results from the survey suggested that the majority of the firms have implemented the necessary policies, programmes and procedures on Workplace Safety and Health (WSH practices. However, BIM is still not widely applied or explored beyond the mandatory requirement that building plans should be submitted to the authorities for approval in BIM format. This paper presents a discussion of the safety aspect of the Intelligent Productivity and Safety System (IPASS developed in the study. IPASS is an intelligent system incorporating the buildable design concept, theory on the detection, prevention and control of hazards, and the Construction Safety Audit Scoring System (ConSASS. The system is based on the premise that safety should be considered at the design stage, and BIM can be an effective tool to facilitate the efforts to enhance safety performance. IPASS allows users to analyse and monitor key aspects of the safety performance of the project before the project starts and as the project progresses.

Radiation safety and regulatory aspects in Medical Facilities

International Nuclear Information System (INIS)

Banerjee, Sharmila

2017-01-01

Radiation safety and regulatory aspect of medical facilities are relevant in the context where radiation is used in providing healthcare to human patients. These include facilities, which carry out radiological procedures in diagnostic radiology, including dentistry, image-guided interventional procedures, nuclear medicine, and radiation therapy. The safety regulations provide recommendations and guidance on meeting the requirements for the safe use of radiation in medicine. The different safety aspects which come under its purview are the personnel involved in medical facilities where radiological procedures are performed which include the medical practitioners, radiation technologists, medical physicists, radiopharmacists, radiation protection and over and above all the patients. Regulatory aspects cover the guidelines provided by ethics committees, which regulate the administration of radioactive formulation in human patients. Nuclear medicine is a modality that utilizes radiopharmaceuticals either for diagnosis of physiological disorders related to anatomy, physiology and patho-physiology and for diagnosis and treatment of cancer

Different aspects of safety in Nuclear Fuel Plant at Pitesti, Romania

International Nuclear Information System (INIS)

Ivana, T.; Epure, Gh.

2009-01-01

Nuclear Fuel Plant (FCN) is a facility that produces fuel bundles of CANDU-6 type for the CANDU nuclear power plant. Only natural and depleted uranium in bulk and itemized form are present as nuclear materials in this facility. Uranium and wastes from the plant are handled, processed, treated and stored throughout the entire facility. The nuclear materials with natural and depleted uranium are entirely under nuclear safeguards. The amount of uranium present in the plant in different forms and activities together with zircaloy, beryllium and other hazardous substances, wastes, explosive materials at high temperatures, etc. lead to special measures undertaken by Nuclear Safety Department (DNS) to ensure nuclear safety. Different aspects of safety are continuously monitored in the plant: operational safety, industrial safety, radiological safety, labour safety, informational safety. The emergency preparedness and response, physical protection and the security of the plant and of the transportation of radioactive materials are contributing to cover the multitude of safety aspects. The safety culture of workers built directly on the safety components completes this activity in the plant. In addition the aspects of safety, security and safeguards are in permanent synergy, parts of the three components being included in each other. In the future the policy of FCN will be focused so that any improvement of one of the safety components will be reflected in improving the other safety aspects. (authors)

Need for an "integrated safety assessment" of GMOs, linking food safety and environmental considerations.

Science.gov (United States)

Haslberger, Alexander G

2006-05-03

information. An integrated assessment might help to focus and save capacities in highly technical areas such as molecular characterization or profiling, which are often necessary for both assessments. In the area of establishing international standards for traded foods, such as for the newly created Standards in Trade and Development Facility (STDF), an integrated assessment might help in the consideration of important environmental aspects involved in health and food safety. Furthermore, an established integrated view on GMOs may create greater consumer confidence in the technology.

EDITORIAL: Safety aspects of fusion power plants

Science.gov (United States)

Kolbasov, B. N.

2007-07-01

This special issue of Nuclear Fusion contains 13 informative papers that were initially presented at the 8th IAEA Technical Meeting on Fusion Power Plant Safety held in Vienna, Austria, 10-13 July 2006. Following recommendation from the International Fusion Research Council, the IAEA organizes Technical Meetings on Fusion Safety with the aim to bring together experts to discuss the ongoing work, share new ideas and outline general guidance and recommendations on different issues related to safety and environmental (S&E) aspects of fusion research and power facilities. Previous meetings in this series were held in Vienna, Austria (1980), Ispra, Italy (1983), Culham, UK (1986), Jackson Hole, USA (1989), Toronto, Canada (1993), Naka, Japan (1996) and Cannes, France (2000). The recognized progress in fusion research and technology over the last quarter of a century has boosted the awareness of the potential of fusion to be a practically inexhaustible and clean source of energy. The decision to construct the International Thermonuclear Experimental Reactor (ITER) represents a landmark in the path to fusion power engineering. Ongoing activities to license ITER in France look for an adequate balance between technological and scientific deliverables and complying with safety requirements. Actually, this is the first instance of licensing a representative fusion machine, and it will very likely shape the way in which a more common basis for establishing safety standards and policies for licensing future fusion power plants will be developed. Now that ITER licensing activities are underway, it is becoming clear that the international fusion community should strengthen its efforts in the area of designing the next generations of fusion power plants—demonstrational and commercial. Therefore, the 8th IAEA Technical Meeting on Fusion Safety focused on the safety aspects of power facilities. Some ITER-related safety issues were reported and discussed owing to their potential

Exploiting data from safety investigations and processes to assess performance of safety management aspects

NARCIS (Netherlands)

Karanikas, Nektarios

2016-01-01

This paper presents an alternative way to use records from safety investigations as a means to support the evaluation of safety management (SM) aspects. Datasets from safety investigation reports and progress records of an aviation organization were analyzed with the scope of assessing safety

Toward a sustainable cement industry in 2020 : improvement of the environmental, health & safety performance

NARCIS (Netherlands)

2001-01-01

This background document concentrates on technical and managerial aspects of Environmental, Health & Safety Performance (EHS) control in the cement industry. It gives an overview of options for improvement toward a sustainable cement production in 2020. Energy consumption and use of alternative

Nuclear electric power safety, operation, and control aspects

CERN Document Server

Knowles, J Brian

2013-01-01

Assesses the engineering of renewable sources for commercial power generation and discusses the safety, operation, and control aspects of nuclear electric power From an expert who advised the European Commission and UK government in the aftermath of Three Mile Island and Chernobyl comes a book that contains experienced engineering assessments of the options for replacing the existing, aged, fossil-fired power stations with renewable, gas-fired, or nuclear plants. From geothermal, solar, and wind to tidal and hydro generation, Nuclear Electric Power: Safety, Operation, and Control Aspects ass

ENVIRONMENTAL AND SAFETY ATTRIBUTES GEOSTRATEGIC HEGEMONY

Directory of Open Access Journals (Sweden)

A. Bohan

2014-12-01

Full Text Available The article deals with modern aspects of manifestation geostrategic hegemony in the context of its environmental and safety attributes that determine the appearance of new determinants of economic development and progress of the world. Specificity of the geopolitical sphere in the context of a retrospective and prospects of development of civilization, which requires the use of new system-methodological approaches to its study. Defined mechanisms to enhance the status of the hegemon, which by their nature are accompanied by threats and challenges of globalization and conflict-military factors in the fight for resources and ecological imbalance in the world. The space competition geopolitical actors are increasingly extended to third countries, thus causing their economic instability, environmental vulnerability and permanent conflict. The factors, causes and conditions for the identification of new measurements geostrategic hegemony, which can affect the configuration of world order, the balance of economic power and the establishment of constructive international dialogue aimed at security, sustainable development and well-being of all mankind.

'Shelter' object safety. Structural aspects

International Nuclear Information System (INIS)

Krivosheev, P.I.; Nemchinov, Yu.I.; Bambura, A.N.; Sokolov, A.P.; Shenderovich, V.Ya.; Vasyagin, R.V.; Klyuchnikov, A.A.; Shcherbin, V.N.; Rud'ko, V.M.; Tokarevskij, V.V.; Belousov, E.L.; Khejger, D.; Gorodetskij, L.

2001-01-01

In 1997 the group of the international experts including Ukrainian organizations and 'Shelter' Object ChNPP are developed the plan of SO transformation into ecological safe status (plan SIP). The realization of the plan was carried out on basis of international tender. The results of structural aspects of SO safety and it transformation into ecological safe state (ESS) are resented in this report

Nuclear medicine software: safety aspects

International Nuclear Information System (INIS)

Anon.

1989-01-01

A brief editorial discusses the safety aspects of nuclear medicine software. Topics covered include some specific features which should be incorporated into a well-written piece of software, some specific points regarding software testing and legal liability if inappropriate medical treatment was initiated as a result of information derived from a piece of clinical apparatus incorporating a malfunctioning computer program. (U.K.)

Statistical aspects of food safety sampling

NARCIS (Netherlands)

Jongenburger, I.; Besten, den H.M.W.; Zwietering, M.H.

2015-01-01

In food safety management, sampling is an important tool for verifying control. Sampling by nature is a stochastic process. However, uncertainty regarding results is made even greater by the uneven distribution of microorganisms in a batch of food. This article reviews statistical aspects of

Safety Aspects for Vertical Wall Breakwaters

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard; Burcharth, H. F.; Christiani, E.

1996-01-01

In this appendix some safety aspects in relation to vertical wall breakwaters are discussed. Breakwater structures such as vertical wall breakwaters are used under quite different conditions. The expected lifetime can be from 5 years (interim structure) to 100 years (permanent structure) and the ...

Laser spectroscopy applied to environmental, ecological, food safety, and biomedical research.

Science.gov (United States)

Svanberg, Sune; Zhao, Guangyu; Zhang, Hao; Huang, Jing; Lian, Ming; Li, Tianqi; Zhu, Shiming; Li, Yiyun; Duan, Zheng; Lin, Huiying; Svanberg, Katarina

2016-03-21

Laser spectroscopy provides many possibilities for multi-disciplinary applications in environmental monitoring, in the ecological field, for food safety investigations, and in biomedicine. The paper gives several examples of the power of multi-disciplinary applications of laser spectroscopy as pursued in our research group. The studies utilize mostly similar and widely applicable spectroscopic approaches. Air pollution and vegetation monitoring by lidar techniques, as well as agricultural pest insect monitoring and classification by elastic scattering and fluorescence spectroscopy are described. Biomedical aspects include food safety applications and medical diagnostics of sinusitis and otitis, with strong connection to the abatement of antibiotics resistance development.

Environmental development plan: magnetic fusion

International Nuclear Information System (INIS)

1979-09-01

This Environmental Development Plan (EDP) identifies the planning and management requirements and schedules needed to evaluate and assess the environmental, health and safety (EH and S) aspects of the Magnetic Fusion Energy Program (MFE). Environment is defined to include the environmental, health (occupational and public), and safety aspects

Safety and environmental aspects of partitioning and transmutation of actinides and fission products. Proceedings of a technical committee meeting held in Vienna, 29 November - 2 December 1993

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-01-01

There is considerable interest in many countries in the partitioning and transmutation of long lived radionuclides as a potential complement to the closed fuel cycle. Recognizing this, the IAEA organized a Technical Committee Meeting on Safety and Environmental Aspects of Partitioning and Transmutation of Actinides and Fission Products, to review the current status of progress of national and international programmes and identify the most important directions of co-operation. The results of the Technical Committee meeting are presented in this document. Refs, figs and tabs.

Safety and environmental aspects of partitioning and transmutation of actinides and fission products. Proceedings of a technical committee meeting held in Vienna, 29 November - 2 December 1993

International Nuclear Information System (INIS)

1995-01-01

There is considerable interest in many countries in the partitioning and transmutation of long lived radionuclides as a potential complement to the closed fuel cycle. Recognizing this, the IAEA organized a Technical Committee Meeting on Safety and Environmental Aspects of Partitioning and Transmutation of Actinides and Fission Products, to review the current status of progress of national and international programmes and identify the most important directions of co-operation. The results of the Technical Committee meeting are presented in this document. Refs, figs and tabs

Canadian contributions to the safety and environmental aspects of fusion

International Nuclear Information System (INIS)

Stasko, R.; Wong, K.

1987-05-01

Since next-step fusion devices will be fuelled with mixtures of tritium and deuterium, the knowledge base and tritium handling experience associated with the operation of CANDU reactors is viewed as relevant to the development of safe fusion technology. Fusion safety issues will be compared with fission safety experience, after which specific Canadian activities in support of fusion safety will be overviewed. In addition, recommendations for appropriate fusion safety criteria will be summarized. 18 refs

Nuclear health and safety. Status of GAO's environmental, safety, and health recommendations to DOE

International Nuclear Information System (INIS)

England-Joseph, Judy; Bannerman, Carl J.; Fenzel, William F.; Brack, David L.; Harter, Frederick A.

1990-04-01

DOE's operations are carried out at many contractor-operated sites around the country, including major sites within the nuclear weapons complex that are involved in the production of nuclear material for weapons and naval fuel. At these sites DOE contractors routinely use and generate large quantities of a wide range of hazardous and radioactive materials. Because these materials require special handling by workers. Also pursuant to Mar. 15, 1989, request, we provided you a report entitled Nuclear Health and Safety: Need for Improved Responsiveness to Problems at DOE Sites (GAO/RCED-90-101, Mar. 28, 1990). to prevent exposure to themselves or releases into the environment, DOE's weapons complex, considered in its entirety, is among the potentially more dangerous industrial operations in the world. Over the last decade, at the request of the Congress, we have carried out a series of assessments and evaluations of various aspects of the complex. In over 60 reports and testimonies published since 1990, we have called attention to the mounting problems facing DOE's nuclear weapons complex. This body of work includes (1) identifying serious, costly, and widespread environmental, safety, and health problems at DOE facilities, (2) calling for outside independent oversight of DOE's nuclear operations, and (3) making recommendations to DOE to strengthen its oversight, providing more detailed information and plans to the Congress, and improving its management and accounting practices. In total, our reports and testimonies have included 54 recommendations to DOE, in addition to recommendations to the Congress, concerning environmental, safety, and health matters at the complex. We consider 23 of the 54 recommendations to be still open. The open recommendations call for improvements such as tighter program controls and clearer standards and policies related to environmental, safety, and health matters

Safety aspects of pressurised water reactors

International Nuclear Information System (INIS)

1985-01-01

This submission to the Health and Safety Executive has been prepared by the Institution of Professional Civil Servants (IPCS) as a contribution to the debate on safety aspects associated with Pressurized Water Reactors (PWRs). Although supporting an energy policy which includes the development of nuclear power, assurances are sought on a number of safety issues if it is decided that this should be generated by a PWR-type reactor. These issues are listed. In particular the following are mentioned: the wider publication of design information, the use of elastic-plastic fracture mechanics as the basis for determining pressure vessel integrity, the failure rate of steam generating units, water coolant quality control, greater investigation of two-phase flow accident conditions, the components of the reactor cooling system and training of reactor personnel in the understanding of LOCA effects. (U.K.)

Aspects of safety and reliability for fusion magnet systems first annual report

International Nuclear Information System (INIS)

Powell, J.

1976-01-01

General systems aspects of fusion magnet safety are examined first, followed by specific detailed analyses covering structural, thermal, electrical, and other aspects of fusion magnet safety. The design examples chosen for analysis are illustrative and are not intended to be definitive, since fusion magnet designs are rapidly evolving. Included is a comprehensive collection of design and operating data relating to the safety of existing superconducting magnet systems. The remainder of the overview lists the main conclusions developed from the work to date. These should be regarded as initial steps. Since this study has concentrated on examining potential safety concerns, it may tend to overemphasize the problems of fusion magnets. In fact, many aspects of fusion magnets are well developed and are consistent with good safety practice. A short summary of the findings of this study is given

Collaborative Approaches in Developing Environmental and Safety Management Systems for Commercial Space Transportation

Science.gov (United States)

Zee, Stacey; Murray, D.

2009-01-01

The Federal Aviation Administration (FAA), Office of Commercial Space Transportation (AST) licenses and permits U.S. commercial space launch and reentry activities, and licenses the operation of non-federal launch and reentry sites. ASTs mission is to ensure the protection of the public, property, and the national security and foreign policy interests of the United States during commercial space transportation activities and to encourage, facilitate, and promote U.S. commercial space transportation. AST faces unique challenges of ensuring the protection of public health and safety while facilitating and promoting U.S. commercial space transportation. AST has developed an Environmental Management System (EMS) and a Safety Management System (SMS) to help meet its mission. Although the EMS and SMS were developed independently, the systems share similar elements. Both systems follow a Plan-Do-Act-Check model in identifying potential environmental aspects or public safety hazards, assessing significance in terms of severity and likelihood of occurrence, developing approaches to reduce risk, and verifying that the risk is reduced. This paper will describe the similarities between ASTs EMS and SMS elements and how AST is building a collaborative approach in environmental and safety management to reduce impacts to the environment and risks to the public.

Design aspects of radiological safety in nuclear facilities

International Nuclear Information System (INIS)

Patkulkar, D.S.; Purohit, R.G.; Tripathi, R.M.

2014-01-01

In order to keep operational performance of a nuclear facility high and to keep occupational and public exposure ALARA, radiological safety provisions must be reviewed at the time of facility design. Deficiency in design culminates in deteriorated system performance and non adherence to safety standards and could sometimes result in radiological incident. Important radiological aspects relevant to safety were compiled based on operating experiences, design deficiencies brought out from past nuclear incidents, experience gained during maintenance, participation in design review of upcoming nuclear facilities and radiological emergency preparedness

Matrix of Aspects and Environmental Impacts as a Tool of Disclosure of Environmental Contingencies

Directory of Open Access Journals (Sweden)

Diene Hellmann Pereira

2014-08-01

Full Text Available Companies that, as a result of their activities, cause an impact on the environment may incur environmental contingencies. Depending on the extent of the impact and the likelihood of future monetary obligations, accounting standards determine situations in which the company shall disclose such events in the explanatory notes. To contribute to this topic, this article aims to verify how a matrix of aspects and environmental impacts can contribute to the accounting disclosure of environmental contingencies for resellers in gas stations. To achieve this, this study used a matrix formed by information regarding the aspects and environmental impacts, in which were considered the scope, severity, and frequency of occurrence of each analyzed situation. The results show that instances of environmental impact in the business environment might be followed through the matrix of environmental aspects and impacts, and that this tool can help in judging which information is subject to disclosure in the notes.

SOCIO-ECONOMIC AND LEGAL ASPECTS OF ENVIRONMENTAL CRIME IN UKRAINE

Directory of Open Access Journals (Sweden)

Tamara Hubanova

2017-12-01

Full Text Available The increased danger of environmental crime is primarily determined by an increase in anthropogenic pressure on the natural environment, which, in the conditions of the global environmental crisis, threatens to cause significant, often non-renewable, damage to the vital interests of man, society, and the state. Ukraine belongs to the countries with the worst ecological situation. Pollution of the environment reached unprecedented levels in recent years. The purpose of the study is to reveal the essence and causes of environmental crime in Ukraine, socioeconomic aspects of the identified phenomenon, analyse the impact of negative consequences of environmental crime on the Ukrainian economy, as well as study legal aspects of criminal liability for environmental crimes and international legal standards on the raised issues. The subject of the study is the socio-economic and legal aspects of environmental crime in Ukraine. Methodology. In order to achieve the goal, the authors of the study carried out an analysis of the definition of the system of environmental crimes in the scientific literature, various statistical data on the state of the ecological situation and crime in Ukraine, as well as laws and regulations defining the national environmental policy of Ukraine. As a result of the study, the essence and causes of environmental crime in Ukraine are highlighted, socio-economic aspects of the phenomenon, the impact of negative consequences of environmental crime on the Ukrainian economy, and legal aspects of criminal liability for environmental crimes and international legal standards on the raised issues are revealed. Value/originality. The raised issues repeatedly attracted the attention of many researchers; in the scientific literature, various aspects of environmental crime were given attention in the works of famous scholars in the field of criminal and environmental law, experts in the field of economics of natural resources. However, the

Quality and Safety Aspects of Cereals (Wheat) and Their Products.

Science.gov (United States)

Varzakas, Theo

2016-11-17

Cereals and, most specifically, wheat are described in this chapter highlighting on their safety and quality aspects. Moreover, wheat quality aspects are adequately addressed since they are used to characterize dough properties and baking quality. Determination of dough properties is also mentioned and pasta quality is also described in this chapter. Chemometrics-multivariate analysis is one of the analyses carried out. Regarding production weighing/mixing of flours, kneading, extruded wheat flours, and sodium chloride are important processing steps/raw materials used in the manufacturing of pastry products. Staling of cereal-based products is also taken into account. Finally, safety aspects of cereal-based products are well documented with special emphasis on mycotoxins, acrylamide, and near infrared methodology.

Integrated Safety Management System Phase 1 and 2 Verification for the Environmental Restoration Contractor Volumes 1 and 2

Energy Technology Data Exchange (ETDEWEB)

CARTER, R.P.

2000-04-04

DOE Policy 450.4 mandates that safety be integrated into all aspects of the management and operations of its facilities. The goal of an institutionalized Integrated Safety Management System (ISMS) is to have a single integrated system that includes Environment, Safety, and Health requirements in the work planning and execution processes to ensure the protection of the worker, public, environment, and the federal property over the life cycle of the Environmental Restoration (ER) Project. The purpose of this Environmental Restoration Contractor (ERC) ISMS Phase MI Verification was to determine whether ISMS programs and processes were institutionalized within the ER Project, whether these programs and processes were implemented, and whether the system had promoted the development of a safety conscious work culture.

Post-mining safety implementations and environmental aspects of abandoned mine sites in Limousin. 2006 status (and perspectives 2007); Mises en securite en apres-mine et aspects environnementaux des anciens sites miniers en Limousin. Bilan 2006 (et perspectives 2007)

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

This document summarizes the actions carried out in 2006 at some French abandoned mine sites: 1 - safety implementations and risks abatement in the framework of post-mining actions: coal mines of Ahun (23) and Argentat (19), antimony mines of Biard (87); 2 - remedial actions at the tin/tungsten mine of Puy-les-Vignes (87) and at the gold mine of Chatelet (23); 3 - 2007 post-mining perspectives; 4 - environmental aspects of abandoned mine sites: gold mines of Chatelet (23), Cheni and Bourneix (87), uranium mines of Haute-Vienne (expertise, control of effluents, financial warranties about tailings storage sites maintenance). (J.S.)

Safety and environmental aspects of fusion power

International Nuclear Information System (INIS)

McCarthy, K.A.

1993-01-01

Fusion power has the potential to be a safe and environmentally friendly energy source. Materials and design can limit hazards from accidental release of radioactive material and minimize waste disposal problems. In addition, no emissions are produced to degrade visibility, increase greenhouse gases, cause acid rain or reduce the ozone layer. Because of the flexibility in materials choice, recycling and near-surface burial are potential options for radioactive waste management

Safety aspects of the RECH-1 core conversion

International Nuclear Information System (INIS)

Wetherby, Jaime Riesle

1998-01-01

When the RECH-1 research reactor joined the core conversion program for low enrichment fuel, the need to review some safety related aspects, which are currently under way with different degrees of progress, became apparent. The mentioned aspects can be grouped into: evaluation of the technical specifications of the new fuel elements: the technical specifications were carefully verified and contrasted with the recommendations of the IAEA and with those of manufacturers which are widely known for their expertise. (author)

Data base of the environmental aspects of the transuranics

International Nuclear Information System (INIS)

Pfuderer, H.

1975-01-01

Indexed and abstracted references to the environmental aspects of the transuranium elements are entered into and are retrievable from a dynamic, computerized information file (or data base) that is easily modified to reflect changing research needs. The information is distilled from the documents with the specific needs of the researcher in mind, such as numeric results, new methods, or instrumentation. The major areas of evaluation are: biological and medical studies on the effects of the transuranics, particularly as these elements relate to health considerations in man; biological and ecological availability, turnover, and food chain dynamics; analysis of environmental materials; environmental transport mechanisms, including resuspension; waste disposal as related to environmental concerns; monitoring; and regulations and standards for environmental levels. Annotated references are indexed to allow easy access for retrieving references to documents of interest to the user. The goal is to furnish the users all the references related to their specific query and few that are unrelated. This is done by liberal use of subject categories and keyterms. The studies on man and animals are divided into the subject categories of medical and biological aspects. Those aspects that are considered important when the document is analyzed are tabulated. These data are sought for in the article, included in the abstracts, and indexed with keyterms. This checklist is one of the ways the Data Base on the Environmental Aspects of the Transuranics strives to give users a reference to every paper in their subject area

Progress on the European Safety and Environmental Assessment of Fusion Power (SEAFP)

International Nuclear Information System (INIS)

Cook, I.

1994-01-01

The Safety and Environmental Assessment of Fusion Power (SEAFP) project was set up by the European Community Fusion Programme in response to recommendations made by a high level Fusion Programme Evaluation Board. The Evaluation Board stated that fusion potentially possesses ''inherent environmental and safety advantages over all current alternatives for base load electricity generation'', but that a ''convincing demonstration'' of these potential advantages is necessary. SEAFP is undertaken by three main participants: the NET Team, The Euratom/UKAEA Association, and European industry. Other EC fusion laboratories also participate. The work embraces the outline design of fusion power stations, the safety and environmental assessment of those designs, and interactions between design and assessment to improve the design. The project began in April 1992 and will report in December 1994. In the first year of the project, five candidate blanket concepts were developed in parallel. Other aspects of design were developed as far as possible independently of the blanket designs. Assessments were made of the technical merits of the candidate designs, and scoping calculations were used to provide preliminary assessments of their accident and waste management characteristics. Accident identification studies were used to select the bounding sequences to be analysed later in detail. Targets for safety and environmental performance were developed. This phase of the study culminated, in August 1993, in the selection of two plant models, one based on a water/martensitic steel/lithium-lead blanket, the other based on a helium/vanadium alloy/lithium oxide blanket, to be developed and assessed in more detail. Other design variants will be assessed through sensitivity studies. ((orig.))

On some aspects of nuclear safety surveillance and review

International Nuclear Information System (INIS)

Li Ganjie; Zhu Hong; Zhou Shanyuan

2004-01-01

Five aspects of the nuclear safety surveillance and review are discussed: Strict implementation of nuclear safety regulation, making the nuclear safety surveillance and review more normalization, procedurization, scientific decision-making; Strictly requiring the applicant to comply with the requirements of codes, do not allowing the utilization of mixing of codes; Properly controlling the strictness for the review on significant non-conformance; Strengthening the co-operation between regional offices and technical support units, Properly treat the relations between administrational management unit and technical support units. (authors)

The hierarchy of environmental health and safety practices in the U.S. nanotechnology workplace.

Science.gov (United States)

Engeman, Cassandra D; Baumgartner, Lynn; Carr, Benjamin M; Fish, Allison M; Meyerhofer, John D; Satterfield, Terre A; Holden, Patricia A; Harthorn, Barbara Herr

2013-01-01

Manufacturing of nanoscale materials (nanomaterials) is a major outcome of nanotechnology. However, the potential adverse human health effects of manufactured nanomaterial exposure are not yet fully understood, and exposures in humans are mostly uncharacterized. Appropriate exposure control strategies to protect workers are still being developed and evaluated, and regulatory approaches rely largely on industry self-regulation and self-reporting. In this context of soft regulation, the authors sought to: 1) assess current company-reported environmental health and safety practices in the United States throughout the product life cycle, 2) consider their implications for the manufactured nanomaterial workforce, and 3) identify the needs of manufactured nanomaterial companies in developing nano-protective environmental health and safety practices. Analysis was based on the responses of 45 U.S.-based company participants in a 2009-2010 international survey of private companies that use and/or produce nanomaterials. Companies reported practices that span all aspects of the current government-recommended hierarchical approach to manufactured nanomaterials' exposure controls. However, practices that were tailored to current manufactured nanomaterials' hazard and exposure knowledge, whether within or outside the hierarchical approach, were reported less frequently than general chemical hygiene practices. Product stewardship and waste management practices-the influences of which are substantially downstream-were reported less frequently than most other environmental health and safety practices. Larger companies had more workers handling nanomaterials, but smaller companies had proportionally more employees handling nanomaterials and more frequently identified impediments to implementing nano-protective practices. Company-reported environmental health and safety practices suggest more attention to environmental health and safety is necessary, especially with regard to

Distinctive safety aspects of the CANDU-PHW reactor design

International Nuclear Information System (INIS)

Kugler, G.

1980-01-01

Two lectures are presented in this report. They were prepared in response to a request from IAEA to provide information on the 'Special characteristics of the safety analysis of heavy water reactors' to delegates from member states attending the Interregional Training Course on Safety Analysis Review, held at Karlsruhe, November 19 to December 20, 1979. The CANDU-PHW reactor is used as a model for discussion. The first lecture describes the distinctive features of the CANDU reactor and how they impact on reactor safety. In the second lecture the Canadian safety philosophy, the safety design objective, and other selected topics on reactor safety analysis are discussed. The material in this report was selected with a view to assisting those not familiar with the CANDU heavy water reactor design in evaluating the distinctive safety aspects of these reactors. (auth)

Environmental and safety problems of waste management in nuclear engineering

International Nuclear Information System (INIS)

Schwibach, J.; Jacobi, W.

1976-01-01

The environmental and safety problems which waste management in nuclear technology poses are discussed under the aspects of the disposal of radioactive waste by nuclear facilities and the safety of radioactive waste disposal. The release and global distribution of long-lived radionuclides such as tritium, Kr-85, C-14, I-129, and Pu-239 as well as the radiation exposure of the world population resulting thereof are investigated, the authors starting from a specific production rate of the nuclides released from nuclear facilities. Definitions of the terms 'dose commitment' and 'collective dose commitment' are given. Furthermore, local radiation exposure in reprocessing plants is investigated and compared with regional and global radiation exposure. A recommendation is made to take measures which would reduce the nuclides tritium, Kr-85, and C-14 in order to achieve considerably smaller collective doses. (HR/LN) [de

IAEA activities on safety aspects of NPP ageing

International Nuclear Information System (INIS)

Pachner, J.

1998-01-01

A review of IAEA activities concerned with safety aspects of nuclear power plants ageing is given for the period from 1995 to 1998 with the prospects till year 2000. Coordinated Research programs were conducted on Management Ageing of Concrete Containment Buildings; Management of Ageing of In-Containment I and C cables. TECDOCs were published on Assessment and Management of Ageing of Major NPP Components Important for Safety of CANDU, PWR and BWR NPPs. Technical Committee Meetings and Interregional training courses concerned with the same subjects were held

Safety aspects of solvent nitration in HTGR fuel reprocessing

International Nuclear Information System (INIS)

Wilbourn, R.G.

1977-06-01

Reprocessing of HTGR fuels requires evaporative concentration of uranium and thorium nitrate solutions. The results of a bench-scale test program conducted to assess the safety aspects of planned concentrator operations are reported

Safety of nuclear installations: Future direction

International Nuclear Information System (INIS)

1990-04-01

The Workshop presentations were divided into sessions devoted to the following topics: Environmental impact of fossil fuel energy technologies (5 papers), Future needs for nuclear power (7 papers), Safety objectives (10 papers), Safety aspects of the next generation of current-type nuclear power plants (8 papers), Safety aspects of new designs and concepts for nuclear power plants (6 papers), Special safety issues: Safety aspects of new designs and concepts for nuclear power plants (5 papers), Safety aspects of new designs and processes for the nuclear fuel cycle (5 papers), Closing panel (3 papers), 12 poster presentations and a Summary of the Workshop. A separate abstract was prepared for each of these papers. Refs, figs and tabs

Safety aspects in rare earths recovery

International Nuclear Information System (INIS)

Bhattacharya, R.

2014-01-01

Recovery of rare earths involves mining of beach sands, mineral separation to obtain monazite and its chemical processing to obtain rare earth composites. The composites are then subjected to further chemical treatment to obtain individual rare earths. Although the separated out rare earths are not radioactive, the process for recovery of rare earths involve both radiological as well as conventional hazards. This paper highlights the safety aspects in the mining, mineral separation and chemical processing of monazite to obtain rare earths

Environmental Regulation and Food Safety: Studies of Protection ...

International Development Research Centre (IDRC) Digital Library (Canada)

Environmental Regulation and Food Safety: Studies of Protection and Protectionism. Book cover Environmental Regulation and Food Safety: Studies of Protection and Protectionism. Directeur(s) : Veena Jha. Maison(s) d'édition : Edward Elgar, IDRC. 1 janvier 2006. ISBN : 184542512X. 250 pages. e-ISBN : 155250185X.

Environmental and Energy Aspects of Construction Industry and Green Buildings

Science.gov (United States)

Kauskale, L.; Geipele, I.; Zeltins, N.; Lecis, I.

2017-04-01

Green building is an important component of sustainable real estate market development, and one of the reasons is that the construction industry consumes a high amount of resources. Energy consumption of construction industry results in greenhouse gas emissions, so green buildings, energy systems, building technologies and other aspects play an important role in sustainable development of real estate market, construction and environmental development. The aim of the research is to analyse environmental aspects of sustainable real estate market development, focusing on importance of green buildings at the industry level and related energy aspects. Literature review, historical, statistical data analysis and logical access methods have been used in the research. The conducted research resulted in high environmental rationale and importance of environment-friendly buildings, and there are many green building benefits during the building life cycle. Future research direction is environmental information process and its models.

The Influence Paths of Emotion on the Occupational Safety of Rescuers Involved in Environmental Emergencies- Systematic Review Article.

Science.gov (United States)

Lu, Jintao; Yang, Naiding; Ye, Jinfu; Wu, Haoran

2014-11-01

A detailed study and analysis of previous research has been carried out to illustrate the relationships between a range of environmental emergencies, and their effects on the emotional state of the rescuers involved in responding to them, by employing Pub Med, Science Direct, Web of Science, Google Scholar, CNKI and Scopus for required information with the several keywords "emergency rescue", "occupational safety", "natural disaster", "emotional management". The effect of the rescuers' emotion on their occupational safety and immediate and long-term emotional behavior is then considered. From these considerations, we suggested four research propositions related to the emotional effects at both individual and group levels, and to the responsibilities of emergency response agencies in respect of ensuring the psychological and physical occupational safety of rescuers during and after environmental emergencies. An analysis framework is proposed which could be used to study the influence paths of these different aspects of emotional impact on a range of occupational safety issues for rescue workers. The authors believe that the conclusions drawn in this paper can provide a useful theoretical reference for decision-making related to the management and protection of the occupational safety of rescuers responding to natural disasters and environmental emergencies.

Development of an environmental safety case guidance manual

International Nuclear Information System (INIS)

Wellstead, Matthew John

2014-01-01

NDA RWMD is currently considering the scope, purpose and structure of a safety case manual that covers the development of nuclear operational, transport and environmental safety cases for a geological disposal facility in the United Kingdom. This paper considers the Environmental Safety Case (ESC) input into such a manual (herein referred to as the 'ESC Manual'), looking at the drivers and benefits that a guidance manual in this area may provide. (authors)

Safety, Health, and Environmental Auditing A Practical Guide

CERN Document Server

Pain, Simon Watson

2010-01-01

A practical guide to environmental, safety, and occupational health audits. It allows organizations and business to avoid expensive external auditors and retain the knowledge and learning 'in-house'. It allows any competent manager or safety/environmental officer to undertake in-house audits in a competent and reproducible fashion.

Environmental aspects and renewable energy sources in the production of construction aggregate

Science.gov (United States)

Skrzypczak, Izabela; Kokoszka, Wanda; Buda-Ożóg, Lidia; Kogut, Janusz; Słowik, Marta

2017-11-01

The main activity of open pit mining of aggregates are aggregates' exploitation of natural mineral deposits and its modification in order to obtain high-quality aggregates. The development of aggregate production is conditioned by a number of factors. The most important are: documented material resources, mining and manufacturing capabilities, the need of environmental protection (environmental aspects), the subordination of the plan of spatial development, formal and legal issues, as well as economic and financial aspects. While identifying and assessing the environmental impacts of manufacturing aggregates one may distinguish those environmental aspects that have or may have the greatest magnitude of the impact on the environment as a result of industrial activities. Manufacturers producing aggregates located in the areas covered by the special environmental protection require extra diligence in the conduct of mining activities for preservation of natural resources. The article discusses some main environmental aspects of the production of construction aggregates on the example of one of the largest producers of this material in Subcarpathian province of Poland. Environmental protection in production of aggregates may refer to four aspects: the use of natural resources, having excluded land from agriculture and forestry, land reclamation after exploitation, and use of energy from renewable energy sources. The economic and environmental impact of production volume of aggregates is evaluated by the index information capacity method and the method of graphs.

ETHICAL ASPECTS OF ENVIRONMENTAL MANAGEMENT

Directory of Open Access Journals (Sweden)

Cîrstea Ştefan-Dragoş

2013-07-01

Full Text Available The purpose of this article is to outline the main economical and social benefits that can be obtained by adopting an ethical attitude of the organisations which use a performant environmental management. From the idea that the human being is the master of nature, it was passed to the view according to which the human being must ensure a balance between consumption and the use of resources. In order to achieve our goal we identified the factors that lead to long term or even permanent destructive effects over the environment and we briefly present the reasons for which the organizations adopt and implement environmental management systems. Also, the difficulties encountered in implementing environmental strategies have been briefly enumerated and the competitive and economic advantages that can be achieved by adopting an efficient environmental management and the main reasons that grant to the environmental management a special significance were exposed. This theoretical paper emphasizes the importance of the adoption by organizations of a "green behavior" and reveals correlations between sustainability, economic growth and environmental performance in organizations. The analysis of the ethical aspects of environmental management shows the links that can be created between the development of an ethical culture of organizations and the achievement of the environmental excellence. The research provides an overview of the concept of environmental ethics and encloses it within the scope of environmental management. Someone needs to explain why an increasing number of organizations, both large and small, are setting up environmental management systems, making environmental investments and reducing risks over and beyond legal requirements, even when the benefits are not at all obvious, even in the long run. Also, this paper provides some practical examples of organizations environmental problems and points out how these organizations adapted their

Environmental aspects of nuclear power applications

International Nuclear Information System (INIS)

Penner, S.S.; Howe, J.P.; Icerman, L.

1976-01-01

The paper estimates the future dangers from the nuclear industry. Historically, the occurrence of nuclear reactor accidents has not been a hazard to the U.S. population, because of relatively limited reactor deployment and because of relatively safe operation. Some factual inputs were taken from the Rasmussen Report, ''An Assessment of Accident Risks in U.S. Commercial Nuclear Power Plants.'' It is noted that data on nuclear power plant accidents follow a curve about four orders of magnitude below that for persons on the ground killed by air crashes. Data show that coal mining produced about ten times as many disabilities as uranium mining and milling per 10 6 MW(e)h of energy recovered, while the number of injuries per 10 6 man-hours of work was roughly comparable for these two types of occupations. Information on the following subjects is then presented: radiation protection standards, radiation exposures; radiation emitted from nuclear reactors under normal operating conditions; accidents involving nuclear fission reactors; fuel reprocessing; nuclear waste disposal; estimates of environmental and safety aspects of fusion power; licensing of nuclear reactors; nuclear safeguards: diversion of nuclear materials, sabotage, and subversion; and nuclear energy and trade deficits in which data are presented estimating a timetable expressing the economic power of OPEC, or the time required for OPEC wealth to purchase the world's major assets

Environmental aspects of nuclear power

International Nuclear Information System (INIS)

Ward, D.P.

1987-01-01

Nuclear power provides the world with an important option for generating electricity. To successfully and safely utilize this power, engineering and environmental factors should be carefully considered throughout a nuclear power plant project, especially during the planning stages. This paper discusses the major environmental aspects of a nuclear power plant project from site selection to retirement. During the site selection process, both engineering and environmental resources must be identified and evaluated. Environmental resources include areas that support agricultural or aquatic commercial activities, habitats for commercial or endangered species, population centers, transportation systems, and recreational areas. Also, during the site selection process, the potential impacts of both construction and operating activities must be considered. In addition to the area actually disturbed by construction, construction activities also affect local services, such as transportation systems, housing, school systems, and other social services. Since nuclear power plants use a 'clean fuel,' generally the most significant operating activity having a potential environmental impact is the discharge of cooling water. The potential effect of this discharge on commercial activities and sensitive habitats should be thoroughly evaluated. Lastly, the method of decommissioning can affect long-range land use planning and should therefore be considered during the planning process. With appropriate planning, nuclear power plants can be constructed and operated with minimum environmental impact. (author)

Design and safety aspects of nuclear district heating reactors

International Nuclear Information System (INIS)

Brogli, R.; Mathews, D.; Pelloni, S.

1989-01-01

Extensive studies on the rationale, the potential and the technology of nuclear district heating have been performed in Switzerland. Beside economics the safety aspects were of primary importance. Due to the high costs to transport heat the heating reactor tend to be small and therefore, minimally staffed and located close to population centers. Stringed safety rules are therefore applying. Gas cooled reactors are well suited as district heating reactors since they have due to their characteristics several inherent features, significant safety margins and a remarkable radioactivity retention potential. Some ways to mitigate the effects of water ingress and graphite corrosion are under investigation. (author). 5 refs, 3 figs

Health, safety, and environmental auditing in the E and P industry

International Nuclear Information System (INIS)

Sexton, K.; Visser, K.

1991-01-01

This paper gives an overview of the development of auditing within the field of Health, Safety and Environmental (HSE) management in the E and P industry. Auditing of these aspects of the business is relatively recent, and the adoption of formal audit programmes is increasingly regarded as an essential element of the HSE management program. Auditing provides assurance that internal controls are working effectively, and provides vital information for system improvement. An overview will be given of the transitional phases that the HSE auditing process has been through; the factors that have influenced those developments; and some views on potential future developments

Environmental aspects of nuclear power

International Nuclear Information System (INIS)

Ward, D.P.

1988-01-01

Nuclear power provides the world with an important option for generating electricity. To successfully and safely utilize this power, engineering and environmental factors should be carefully considered throughout a nuclear power plant project, especially during the planning stages. This paper discusses the major environmental aspects of a nuclear power plant project from site selection to retirement. During the site selection process, both engineering and environmental resources must be identified and evaluated. Environmental resources include areas that support agricultural or aquatic commercial activities, habitats for commercial or endangered species, population centers, transportation systems, and recreational areas. Also during the site selection process, the potential impacts of both construction and operating activities must be considered. In addition to the area actually disturbed by construction, construction activities also affect local services, such as transportation systems, housing, school systems, and other social services. Since nuclear power plants use a ''clean fuel,'' generally the most significant operating activity having a potential environmental impact is the discharge of cooling water. The potential effect of this discharge on commercial activities and sensitive habitats should be thoroughly evaluated. Lastly, the method of decommissioning can affect long-range land use planning and should therefore be considered during the planning process

Nuclear power plant Isar. Actualized environmental statement 2012 on the consolidated environmental statement 2010

International Nuclear Information System (INIS)

2012-01-01

The actualized environmental statement 2012 for the NPP Isar covers the following issues: Direct environmental aspects: heat dissipation to the environment, water management, radioactive matter release onto the environment, environmental monitoring, waste management, operational materials supply, radioactive materials transport, safety of the nuclear facilities, remote monitoring and information system, environmental protection, communication; indirect environmental aspects; core indicators according EMAS III, development of the environmental targets and programs, reference to the valid environmental regulations, declaration of the environmental consultant.

FACTORS OF NANOTECHNOLOGY AND BIODIVERSITY: ENVIRONMENTAL AND EDUCATIONAL ASPECTS

Directory of Open Access Journals (Sweden)

A. V. Kozachek

2015-01-01

Full Text Available The aim is to consider the features of impact of nanotechnology on biodiversity in the future.Methods. We suggest an approach, according to which nanotechnologies are viewed as key technologies of the sixth technological order. It is assumed that nanotechnology may be a potential source of environmental problems of the future, and the basis for the creation of new advanced types of environmental engineering and technology. Since all of the above is important both within the actual environmental performance and for the purposes of professional engineering and environmental training. We suggest in this paper to view the problem of the impact of nanotechnology on biodiversity and the state of the environment through environmental and educational aspects.Results. We considered and analyzed the environmental and educational aspects of the application of nanotechnology in the period of the sixth technological order. Implementing procedures for their analysis has contributed to the identification and systematization of the various impacts of nanotechnology on biodiversity and the state of the environment, and identification of options for the prevention of such factors. Based on the results of such studies we have identified educational aspects of training environmental engineers during the sixth technological order; defined a new focus of the training in the sixth technological order, which involves, in our opinion, the study of features of a rational and prudent use of natural resources with the use of appropriate innovative eco-oriented nanotechnology, education of students in terms of the understanding of the causes, consequences and ways to prevent the global resource crisis on the planet due to the emergence of a new class of nano-contamination.Main conclusions. The results can be recommended to be used in practice for more in-depth analysis of the specific environmental challenges of nanotechnology, and revising approaches to the design of the

ENVIRONMENTAL SAFETY OF LIVESTOCK PRODUCTS IN THE ECONOMIC AND GEOGRAPHIC AREAS OF THE AZERBAIJAN PART OF THE GREATER CAUCASUS

Directory of Open Access Journals (Sweden)

F. M. Jafarova

2016-01-01

Full Text Available Aim. The aim is to study the political, economic and environmental aspects of food security, which is an important component of national security; to study the issues of the use of environmentally friendly agricultural products, as well as the environmental safety of livestock products.Methods. Determination of the dynamics of livestock production on the basis of the comparative statistical analysis, the study of animal breeding territorial organization through a systematic approach.Results. The region has favorable conditions for the production of ecologically clean agricultural products, using environmentally friendly feed. We should develop manufacturing industries to meet international standards and provide the population with healthy food.Conclusion. We revealed the ecological safety of livestock products in the economic and geographic regions of the Azerbaijan part of the Greater Caucasus.

Safety aspects of designs for future light water reactors (evolutionary reactors)

International Nuclear Information System (INIS)

1993-07-01

The main purpose of this document is to describe the major innovations of proposed designs of future light water reactors, to describe specific safety characteristics and safety analysis methodologies, and to give a general overview of the most important safety aspects related to future reactors. The reactors considered in this report are limited to those intended for fixed station electrical power production, excluding most revolutionary concepts. More in depth discussion is devoted to those designs that are in a more advanced state of completion and have been more extensively described and analysed in the open literature. Other designs will be briefly described, as evidence of the large spectrum of new proposals. Some designs are similar; others implement unique features and require specific discussion (not all aspects of designs with unique features are fully discussed in this document). 131 refs, 22 figs

Safety design guides for environmental qualification for CANDU 9

International Nuclear Information System (INIS)

Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young; A. C. D. Wright

1996-03-01

This safety design guide describes the safety philosophy and requirements for the environmental qualification of safety related systems and components for CANDU 9. The environmental qualification program identifies the equipments to be qualified and conditions to be used for qualification and provides comprehensive set of documentation to ensure that the qualification is complete and can be maintained for the life of the plant. A summary of the system, components and structures requiring environmental qualification is provided in the table for the guidance of the system design, and this table will be subject to change or confirmation by the environmental qualification program. Also, plant ares subject to harsh environment is provided in the figure. The change status of the regulatory requirements, code and standards should be traced and this safety design guide shall be updated accordingly. 1 tab., 5 figs. (Author) .new

Geotechnical aspects of site evaluation and foundations for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2003-01-01

This publication is a revision of the former safety standards of IAEA Safety Series No. 50-SG-S8. The scope has been extended to cover not only foundations but also design questions related to geotechnical science and engineering, such as the bearing capacity of foundations, design of earth structures and design of buried structures. Seismic aspects also play an important role in this field, and consequently the Safety Guide on Evaluation of Seismic Hazards for Nuclear Power Plants, Safety Standards Series No. NS-G-3.3, which discusses the determination of seismic input motion, is referenced on several occasions. The present Safety Guide provides an interpretation of the Safety Requirements on Site Evaluation for Nuclear Installations and guidance on how to implement them. It is intended for the use of safety assessors or regulators involved in the licensing process as well as the designers of nuclear power plants, and it provides them with guidance on the methods and procedures for analyses to support the assessment of the geotechnical aspects of the safety of nuclear power plants

Geotechnical aspects of site evaluation and foundations for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2006-01-01

This publication is a revision of the former safety standards of IAEA Safety Series No. 50-SG-S8. The scope has been extended to cover not only foundations but also design questions related to geotechnical science and engineering, such as the bearing capacity of foundations, design of earth structures and design of buried structures Seismic aspects also play an important role in this field, and consequently the Safety Guide on Evaluation of Seismic Hazards for Nuclear Power Plants, Safety Standards Series No. NS-G-3.3, which discusses the determination of seismic input motion, is referenced on several occasions. The present Safety Guide provides an interpretation of the Safety Requirements on Site Evaluation for Nuclear Installations and guidance on how to implement them. It is intended for the use of safety assessors or regulators involved in the licensing process as well as the designers of nuclear power plants, and it provides them with guidance on the methods and procedures for analyses to support the assessment of the geotechnical aspects of the safety of nuclear power plants

Safety and environmental impacts

International Nuclear Information System (INIS)

Fiege, A.; Kramer, W.

1991-01-01

By means of interpreting experimental results, and by means of conservative estimates, several fundamental statements can be made concerning the safety and environmental impacts of fusion plants. Relevant findings so far regarding normal operation and incidents as well as risks involved in raw material extraction and waste management are compiled. (DG) [de

RATIONALE OF KUYALNIK ESTUARY FILLING ENVIRONMENTAL SAFETY BY THE BLACK SEA WATERS. CHEMICAL ASPECTS

Directory of Open Access Journals (Sweden)

V. P. Antonovich

2014-11-01

Full Text Available It was found that currently sulphate and calcium ions content in Kuyalnik brine close to the solubility product of CaSO4. If brine will not by dilute precipitation of gypsum may be expect in prospectstive. It is shown that the dilution of the Kuyalnik brine by seawater willreduces the concentration of calcium and sulfate ions reducing their solubility product and making it impossible the formation of calcium sulfate and precipitation of gypsum. On the basis of established the contents of some heavy metals, polyarenes, chlorinated pesticides and polychlorinated biphenyls which were in water and sediments of the Gulf of Odessa , brine and peloids Kuyalnik estuary pronounced more pollution by priority toxicants of estuary compared with seawater. Concluded tht environmental safety of Kuyalnik estuary filling by the Black Sea waters.

Environmental aspects of PV power systems. Report on the IEA PVPS Task 1 Workshop

International Nuclear Information System (INIS)

Nieuwlaar, E.; Alsema, E.

1997-12-01

During normal operation, photovoltaic (PV) power systems do not emit substances that may threaten human health or the environment. In fact, through the savings in conventional electricity production they can lead to significant emission reductions. There are, however, several indirect environmental impacts related to PV power systems that require further consideration. The production of present generation PV power systems is relatively energy intensive, involves the use of large quantities of bulk materials and (smaller) quantities of substances that are scarce and/or toxic. During operation, damaged modules or a fire may lead to the release of hazardous substances. Finally, at the end of their useful life time PV power systems have to be decommissioned, and resulting waste flows have to be managed. An expert workshop was held as part of the International Energy Agency Photovoltaic Power Systems Implementing Agreement Programme, to address these environmental aspects of PV power systems. The objectives of the workshop were: (a) review/overview of issues and approaches regarding environmental aspects of PV power systems; (b) enhanced clarity and consensus regarding e.g. Energy Pay-Back Time; (c) identification of issues of environmental importance regarding PV power systems ('hot spots'); (d) identification of issues requiring further attention ('white spots'); and (e) establish a network of researchers working on PV environmental issues. 25 participants from Europe, the United States, Japan, and Australia attended the workshop, representing the researchers in the field of environmental aspects of PV systems, R ampersand D managers, industry and utilities. The environmental issues that are considered most relevant for PV power systems were identified in the workshop as well as the approaches that may be used to investigate them. The main environmental issues discussed at the workshop were: energy use; resource depletion (e.g. the resource availability for indium

Pesticide Substitution: Combining Food Safety with Environmental Quality

DEFF Research Database (Denmark)

Fantke, Peter

2015-01-01

Various pesticides are authorized for use on agricultural food crops. Despite regulatory risk assessments aiming at ensuring consumer and environmental safety, pesticides contribute to human and environmental impacts. Guidance is needed to optimize pesticide use practice and minimize human...... and environmental exposure. Comparative pesticide substitution scenarios are presented to address this need. In a case study on wheat, different pesticides have been compared with respect to their substitution potential with focus on human health. Results demonstrate that health impacts can be reduced up to 99......% by defining adequate substitution scenarios. Comprehensive scenarios need to also consider worker and environmental burden, and information on crop rotation, pest pressure, environmental conditions, application costs and efficacy. Such scenarios help to increase food safety and more sustainable use...

OECD-NEA’s New Approach to Human Aspects of Nuclear Safety

International Nuclear Information System (INIS)

Hah, Y.

2016-01-01

Fukushima Daiichi accident in 2011 in Japan has brought us new challenge to deal with “human” aspects of nuclear safety which have always been crucial elements of safety, but which often receive less attention than technical and equipment issues. The key factors that led to the accident were not only a huge tsunami following a massive earthquake, but also a variety of human failures: organizational decision-making, safety culture of the plant staff and the regulator, training to assure that operators are well prepared for a wide range of possible challenges. In order to fully understand and respond to the lessons learned from the Fukushima accident, the OECD-NEA created a new Division of Human Aspects of Nuclear Safety (HANS) which is focusing on the human issues related to nuclear safety. The Division of HANS is responsible for supporting the relevant work programmes of the NEA; fostering greater focus and building expertise in areas vital to effective nuclear safety such as safety culture, personnel training policies and practices; and safety-related public communication and stakeholder engagement. In 2014, NEA produced the Green Booklet on the Characteristics of an Effective Nuclear Regulator noting that the characteristic of “safety focus and safety culture” was one of the four fundamental principles from which all regulatory body actions should be derived. Based on this understanding, in 2015, NEA published the follow up Green Booklet, Safety Culture of an Effective Nuclear Regulatory Body, providing main principles and attributes to be benchmarked for the regulatory bodies to encourage them to enhance their effectiveness as they fulfil their mission to protect public health and safety. Many challenges exist to regulatory bodies’ safety culture which must be recognised, understood and overcome. Continuing collective efforts could help turn these challenges into opportunities to further strengthen the overall health of the safety culture of regulatory

New safety valve addresses environmental concerns

International Nuclear Information System (INIS)

Taylor, J.; Austin, R.

1992-01-01

This paper reports that Conoco Pipeline is using a unique relief valve to reduce costs while improving environmental protection at its facilities. Conoco Pipeline Co. Inc. began testing new relief valves in 1987 to present over-pressuring its pipelines while enhancing the safety, environmental integrity and profitability of its pipelines. Conoco worked jointly with Rupture Pin Technology Inc., Oklahoma City, to seek a solution to a series of safety, environmental, and operational risks in the transportation of crude oil and refined products through pipelines. Several of the identified problems were traced to a single equipment source: the reliability of rupture discs used at pipeline stations to relieve pressure by diverting flow to tanks during over-pressure conditions. Conoco's corporate safety and environmental policies requires solving problems that deal with exposure to hydrocarbon vapors, chemical spills or the atmospheric release of fugitive emissions, such as during rupture disc maintenance. The company had used rupture pin valves as vent relief devices in conjunction with development by Rick Austin of inert gas methods to protect the inner casing wall and outer carrier pipeline wall in pipeline road crossings. The design relies on rupture pin valves set at 5 psi to isolate vent openings from the atmosphere prior to purging the annular space between the pipeline and casing with inert gas to prevent corrosion. Speciality Pipeline Inspection and Engineering Inc., Houston, is licensed to distribute the equipment for the new cased-crossing procedure

Environmental aspects of fusion reactors

International Nuclear Information System (INIS)

Coffman, F.E.; Williams, J.M.

1975-01-01

With the continued depletion of fossil and uranium resources in the coming decades, the U. S. will be forced to look more toward renewable energy resources (e.g., wind, tidal, geothermal, and solar power) and toward such longer-term and nondepletable energy resources as fissile fast breeder reactors and fusion power. Several reference reactor designs have been completed for full-scale fusion power reactors that indicate that the environmental impacts from construction, operation, and eventual decommissioning of fusion reactors will be quite small. The principal environmental impact from fusion reactor operation will be from thermal discharges. Some of the safety and environmental characteristics that make fusion reactors appear attractive include an effectively infinite fuel supply at low cost, inherent incapability for a ''nuclear explosion'' or a ''nuclear runaway,'' the absence of fission products, the flexibility of selecting low neutron-cross-section structural materials so that emergency core cooling for a loss-of-coolant or other accident will not be necesary, and the absence of special nuclear materials such as 235 U or 239 Pu, so that diversion of nuclear weapons materials will not be possible and nuclear blackmail will not be a serious concern

Radiological safety aspects of the operation of neutron generators

International Nuclear Information System (INIS)

Boggs, R.F.

1976-01-01

The purpose of the manual is to provide some basic guidelines to persons with a minimum of training in radiological health or health physics, on some safety aspects of the operation of sealed-tube and Cockcroft-Walton type neutron generators. The manual does not state rules or regulations but presents a description of the most likely hazards. It is relevant to those relatively compact neutron generators which usually operate at less than 150-200 kV for the purpose of producing 14-MeV neutrons. The scope is limited to basic discussions of hazards and measurement techniques. Separate chapters are devoted to the characteristics and use of neutron generators; radiation hazards and safety considerations; radiation monitoring and interpretation of measurements; and requirements for an effective safety programme. Two appendices deal with non-radiation hazards and safety considerations, and with a neutron generator laboratory, respectively. An extensive list of bibliographic references is included

Fusion reactor safety

International Nuclear Information System (INIS)

1987-12-01

Nuclear fusion could soon become a viable energy source. Work in plasma physics, fusion technology and fusion safety is progressing rapidly in a number of Member States and international collaboration continues on work aiming at the demonstration of fusion power generation. Safety of fusion reactors and technological and radiological aspects of waste management are important aspects in the development and design of fusion machines. In order to provide an international forum to review and discuss the status and the progress made since 1983 in programmes related to operational safety aspects of fusion reactors, their waste management and decommissioning concepts, the IAEA had organized the Technical Committee on ''Fusion Reactor Safety'' in Culham, 3-7 November 1986. All presentations of this meeting were divided into four sessions: 1. Statements on National-International Fusion Safety Programmes (5 papers); 2. Operation and System Safety (15 papers); 3. Waste Management and Decommissioning (5 papers); 4. Environmental Impacts (6 papers). A separate abstract was prepared for each of these 31 papers. Refs, figs, tabs

Driving forces behind the Chinese public's demand for improved environmental safety.

Science.gov (United States)

Wen, Ting; Wang, Jigan; Ma, Zongwei; Bi, Jun

2017-12-15

Over the past decades, the public demand for improved environmental safety keeps increasing in China. This study aims to assess the driving forces behind the increasing public demand for improved environmental safety using a provincial and multi-year (1995, 2000, 2005, 2010, and 2014) panel data and the Stochastic Impacts by Regression on Population, Affluence, and Technology (STIRPAT) model. The potential driving forces investigated included population size, income levels, degrees of urbanization, and educational levels. Results show that population size and educational level are positively (Pdemand for improved environmental safety. No significant impact on demand was found due to the degree of urbanization. For the impact due to income level, an inverted U-shaped curve effect with the turning point of ~140,000 CNY GDP per capita is indicated. Since per capita GDP of 2015 in China was approximately 50,000 CNY and far from the turning point, the public demand for improved environmental safety will continue rising in the near future. To meet the increasing public demand for improved environmental safety, proactive and risk prevention based environmental management systems coupled with effective environmental risk communication should be established. Copyright © 2017 Elsevier B.V. All rights reserved.

UMTRA Project environmental, health, and safety plan

International Nuclear Information System (INIS)

1989-02-01

The basic health and safety requirements established in this plan are designed to provide guidelines to be applied at all Uranium Mill Tailings Remedial Action (UMTRA) Project sites. Specific restrictions are given where necessary. However, an attempt has been made to provide guidelines which are generic in nature, and will allow for evaluation of site-specific conditions. Health and safety personnel are expected to exercise professional judgment when interpreting these guidelines to ensure the health and safety of project personnel and the general population. This UMTRA Project Environmental, Health, and Safety (EH ampersand S) Plan specifies the basic Federal health and safety standards and special DOE requirements applicable to this program. In addition, responsibilities in carrying out this plan are delineated. Some guidance on program requirements and radiation control and monitoring is also included. An Environmental, Health, and Safety Plan shall be developed as part of the remedial action plan for each mill site and associated disposal site. Special conditions at the site which may present potential health hazards will be described, and special areas that should should be addressed by the Remedial Action Contractor (RAC) will be indicated. Site-specific EH ampersand S concerns will be addressed by special contract conditions in RAC subcontracts. 2 tabs

Development Trends in Nuclear Technology and Related Safety Aspects

International Nuclear Information System (INIS)

Kuczera, B.; Juhn, P.E.; Fukuda, K.

2002-01-01

The IAEA Safety Standards Series include, in a hierarchical manner, the categories of Safety Fundamentals, Safety Requirements and Safety Guides, which define the elements necessary to ensure the safety of nuclear installations. In the same way as nuclear technology and scientific knowledge advance continuously, also safety requirements may change with these advances. Therefore, in the framework of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) one important aspect among others refers to user requirements on the safety of innovative nuclear installations, which may come into operation within the next fifty years. In this respect, the major objectives of the INPRO sub-task 'User Requirements and Nuclear Energy Development Criteria in the Area of Safety' have been: a. to overview existing national and international requirements in the safety area, b. to define high level user requirements in the area of safety of innovative nuclear technologies, c. to compile and to analyze existing innovative reactor and fuel cycle technology enhancement concepts and approaches intended to achieve a high degree of safety, and d. to identify the general areas of safety R and D needs for the establishment of these technologies. During the discussions it became evident that the application of the defence in depth strategy will continue to be the overriding approach for achieving the general safety objective in nuclear power plants and fuel cycle facilities, where the emphasis will be shifted from mitigation of accident consequences more towards prevention of accidents. In this context, four high level user requirements have been formulated for the safety of innovative nuclear reactors and fuel cycles. On this basis safety strategies for innovative reactor designs are highlighted in each of the five levels of defence in depth and specific requirements are discussed for the individual components of the fuel cycle. (authors)

Safety aspects of MR imaging

International Nuclear Information System (INIS)

Abart, J.; Ganssen, A.

1995-01-01

With the growing number of Magnetic Resonance Systems in operation in clinical practice, safety aspects gain increasing importance. Therefore, it is necessary to evaluate possible risks and effects on human health. After an introduction to the basic principles and techniques involved, the various effects on human health. After an introduction to the basic principles and techniques involved, the various effects on biological systems and especially the human organism caused by the static magnetic field, the alternating magnetic fields and the high frequency fields required are described on the basis of current literature and partially also on our own experience. Basic information for the safe operation of diagnostic Magnetic Resonance Systems is presented. Limits for exposure to magnetic fields and time-dependent changes of electromagnetic fields for patients and employees as suggested by health authorities are given. (orig.) [de

Assessment of nuclear fuel cycles with respect to assurance of energy supply; economic aspects; environmental aspects; non-proliferation

International Nuclear Information System (INIS)

1979-01-01

This paper, which was presented to all INFCE Working Groups gives a broad qualitative assessment in tabular form of the following five fuel cycles: LWR once-through, LWR with thermal recycle, HWR once-through, HTR with uranium recycle, fast breeder reactor. The assessment is given of the assurance of supply aspects, the macro- and micro-economic aspects, the environmental aspects, and the non-proliferation, including safeguards, aspects of each fuel cycle

The first symposium of Research Center for Radiation Safety, NIRS. Perspective of future studies of radiation safety

International Nuclear Information System (INIS)

Shimo, Michikuni

2002-03-01

This paper summarizes presentations given in the title symposium, held at the Conference Room of National Institute of Radiological Sciences (NIRS) on November 29 and 30, 2001. Contained are Introductory remarks: Basic presentations concerning exposure dose in man; Environmental levels of radiation and radioactivity, environmental radon level and exposure dose, and radiation levels in the specific environment (like in the aircraft): Special lecture (biological effects given by space environment) concerning various needs for studies of radiation safety; Requirement for open investigations, from the view of utilization, research and development of atomic energy, from the clinical aspect, and from the epidemiological aspect: Special lecture (safety in utilization of atomic energy and radiation-Activities of Nuclear Safety Commission of Japan) concerning present state and perspective of studies of radiation safety; Safety of radiation and studies of biological effects of radiation-perspective, and radiation protection and radiation safety studies: Studies in the Research Center for Radiation Safety; Summary of studies in the center, studies of the biological effects of neutron beam, carcinogenesis by radiation and living environmental factors-complicated effects, and studies of hereditary effects: Panel discussion (future direction of studies of radiation safety for the purpose of the center's direction): and concluding remarks. (N.I.)

Review of actinide nitride properties with focus on safety aspects

Energy Technology Data Exchange (ETDEWEB)

Albiol, Thierry [CEA Cadarache, St Paul Lez Durance Cedex (France); Arai, Yasuo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2001-12-01

This report provides a review of the potential advantages of using actinide nitrides as fuels and/or targets for nuclear waste transmutation. Then a summary of available properties of actinide nitrides is given. Results from irradiation experiments are reviewed and safety relevant aspects of nitride fuels are discussed, including design basis accidents (transients) and severe (core disruptive) accidents. Anyway, as rather few safety studies are currently available and as many basic physical data are still missing for some actinide nitrides, complementary studies are proposed. (author)

Safety and environmental requirements and design targets for TIBER-II

International Nuclear Information System (INIS)

Piet, S.J.

1987-09-01

A consistent set of safety and environmental requirements and design targets was proposed and adopted for the TIBER-II (Tokamak Ignition/Burn Experimental Reactor) design effort. TIBER-II is the most recent US version of a fusion experimental test reactor (ETR). These safety and environmental design targets were one contribution of the Fusion Safety Program in the TIBER-II design effort. The other contribution, safety analyses, is documented in the TIBER-II design report. The TIBER-II approach, described here, concentrated on logical development of, first, a complete and consistent set of safety and environmental requirements that are likely appropriate for an ETR, and, second, an initial set of design targets to guide TIBER-II. Because of limited time in the TIBER-II design effort, the iterative process only included one iteration - one set of targets and one design. Future ETR design efforts should therefore build on these design targets and the associated safety analyses. 29 refs., 5 figs., 3 tabs

State partnership in environmental health and safety phase of Plowshare projects

Energy Technology Data Exchange (ETDEWEB)

Kinsman, S [California State Department of Public Health, Berkeley, CA (United States)

1969-07-01

When experiments on projects involving Plowshare devices are conceived, the state chosen for the project should be invited to participate in planning the health and safety aspects and be prepared to actively participate in the D-Day phase as well as the post-detonation activity. In California nuclear science technology and competence have preceded the social acceptance and use of nuclear devices for large scale Plowshare projects. However, the environmental surveillance program of the Bureau of Radiological Health in the State Department of Public Health has established an operative program which will be ready and able to function as an active participant or in a support role in environmental health phases of nuclear projects scheduled in the State. A description of our present program will be included in this paper. This will enable the attendees and readers to realize capabilities which will be activated for participation and/or support roles during Plowshare activities in the State or in a neighboring state if the need arises. (author)

State partnership in environmental health and safety phase of Plowshare projects

International Nuclear Information System (INIS)

Kinsman, S.

1969-01-01

When experiments on projects involving Plowshare devices are conceived, the state chosen for the project should be invited to participate in planning the health and safety aspects and be prepared to actively participate in the D-Day phase as well as the post-detonation activity. In California nuclear science technology and competence have preceded the social acceptance and use of nuclear devices for large scale Plowshare projects. However, the environmental surveillance program of the Bureau of Radiological Health in the State Department of Public Health has established an operative program which will be ready and able to function as an active participant or in a support role in environmental health phases of nuclear projects scheduled in the State. A description of our present program will be included in this paper. This will enable the attendees and readers to realize capabilities which will be activated for participation and/or support roles during Plowshare activities in the State or in a neighboring state if the need arises. (author)

Safety aspects in life extension of NPPs. Working material

International Nuclear Information System (INIS)

2002-01-01

Due to current social and economical framework, in last years many Member States (MS) started a process of Plant Life Extension (PLEX) for their older nuclear facilities. The process followed many different approaches, being intrinsically dependent on the national regulatory framework and technical tradition. This process has many nuclear safety implications, other than strategic and political ones, and therefore a need for tailoring the available safety assessment tools to such applications has become urgent in recent years. Typical safety assessment processes such as the Periodic Safety Review has been used already and can be used in the future as a framework for a PLEX. Also the review of regular maintenance and ageing management programs and the continuous upgrading of the Safety Analysis Report are tools widely used in a life extension context in many MS. However, recently some MS highlighted the need to identify in a clear way the technical aspects more directly affecting the decision for a long-term operation of a nuclear facility. Many Technical Cooperation projects have been requested for the year 2003-2004 on this subject and a generic task in Nuclear Safety proved necessary as a background activity. Therefore, on May 6-10, 2002, a Consultant Meeting dealing with Safety Aspects of life extension for NPPs was convened at the Nuclear Safety Dept. of the IAEA. It was attended by representatives of Regulatory Bodies and Utilities, both from countries with experience of life extension of NPPs and countries where the process is at the beginning. The main application problems were identified and discussed and a first attempt was carried out to define the key elements of the life extension process, isolating peculiar technical items, LTO related, from generic safety related tasks. The result was a preliminary technical document with a collection of basic experience and information for the implementation of a PLEX program. Therefore the draft document was thought

Safety aspects in decontamination operations: Lessons learned during the decommissioning of a small PWR reactor

International Nuclear Information System (INIS)

Klein, M.; Ponnet, M.; Emond, O.

2002-01-01

Decontamination operations are generally executed during the decommissioning of nuclear installations for different objectives: decontamination of loops or large pieces to reduce the dose rate inside a contaminated plant or decontamination to minimize the amount of radioactive waste. These decontamination operations raise safety issues such as radiological exposure, classical safety, environmental releases, production and management of secondary waste, management of primary resources, etc. This paper presents the return of experience from decontamination operations performed during the dismantling of the BR3 PWR reactor. The safety issues are discussed for 3 types of decontamination operations: full system decontamination of the primary loop with a chemical process to reduce the dose rate by a factor of 10; thorough decontamination with an aggressive chemical process of dismantled pieces to reach the unconditional clearance values; and thorough decontamination processes with physical processes of metals and of concrete to reach the unconditional clearance values. For the protection of the workers, we must consider the ALARA aspects and the classical safety issues. During the progress of our dismantling operations, the dose rate issue was becoming less important but the classical safety issues were becoming preponderant due to the use of very aggressive techniques. For the protection of the environment, we must take all the precautions to avoid any leakages from the plant and we must use processes which minimize the use of toxic products and which minimize the production of secondary wastes. We therefore promote the use of regenerative processes. (author)

Extended storage for radioactive wastes: relevant aspects related to the safety

International Nuclear Information System (INIS)

Castillo, Reinaldo G.; Peralta V, José L.P.; Estevez, Gema G. F.

2013-01-01

The safe management of radioactive waste is an issue of great relevance globally linked to the issue of the peaceful use of nuclear energy. Among the steps in the management of this waste, the safe storage is one of the most important. Given the high costs and uncertainties existing among other aspects of the variants of disposal of radioactive waste, the prolonged storage of these wastes for periods exceeding 50 years is an option that different countries more and more value. One of the fundamental problems to take into account is the safety of the stores, so in this work are evaluated different safety components associated with these facilities through a safety analysis methodology. Elements such as human intrusion, the construction site, the design of the facility, among others are identified as some of the key aspects to take into account when evaluating the safety of these types of facilities. Periods of activities planned for a long-term storage of radioactive waste exceed, in general, the useful life of existing storage facilities. This work identified new challenges to overcome in order to meet the requirements for the achievement of a safe management of radioactive waste without negative impacts on the environment and man

Environmental aspects of decentralized electricity production

International Nuclear Information System (INIS)

Henry, J.P.

1991-01-01

Renewable energy sources are the focus of considerable interest because they do not place future generations at risk; the development of cogeneration has been favorably received on the whole because it uses energy that would otherwise be lost. Difficulties are sometimes encountered in the development of small-scale hydroelectric facilities (older facilities negative aspects, over production impression in France, etc.). Environmental protection regulations do not distinguish between centralized and decentralized electricity production, but between large and small production facilities

Environmental policy challenge crime in Republic Serbia and its impact on environmental safety

Directory of Open Access Journals (Sweden)

Jović Vojislav

2014-01-01

Full Text Available Environmental law and ecological security representing nearly two related fields that have a scientific discipline in our legal security framework introduced in the first decade of this century. Despite this fact, the legal norms that regulate the protection and safety of the environment have been studied in the framework of other disciplines, and their etymology suggests that environmental regulations have existed in the ninth century, first as a prohibitive provision 'is prohibited'. It is known that environmental law to a certain extent based on criminal law norms and the norms of a protective object with the environment - Ekos. The fact of regulation of a large number of offenses in this field indicates the significance of the criminal policy which is in the field of environmental law and environmental security provides criminal protection. In this paper, in addition to general introductory remarks on environmental law, environmental safety and environmental tort, consider the area of combating environmental crime, the share of primary and secondary subjects of criminal procedural and international cooperation, particularly in combating transnational environmental crime. In the end, considering the environmental impact of crime on ecological security, clarifying the possible forms of threats and extent of the reaction.

Aspects of nuclear safety in the management of the radioactive wastes

International Nuclear Information System (INIS)

Popescu, D.; Iliescu, E.

1997-01-01

The paper reviews aspects of nuclear safety which should be taken into account in the management of the radioactive wastes. The paper considers underlying criteria concerning the management, collecting, sorting transportation and treatment of radioactive wastes as well as safety engineering measures taken when designing a facility for the treatment of radioactive wastes. The paper also brings forward the removal radioactive wastes and some points on the policy of radioactive wastes management in Romania. (authors)

Environmental safety issues for semiconductors (research on scarce materials recycling)

International Nuclear Information System (INIS)

Izumi, Shigekazu

2004-01-01

In the 21st century, in the fabrication of various industrial parts, particularly, current and future electronics devices in the semiconductor industry, environmental safety issues should be carefully considered. We coined a new term, environmental safety issues for semiconductors, considering our semiconductor research and technology which include environmental and ecological factors. The main object of this analysis is to address the present situation of environmental safety problems in the semiconductor industry; some of which are: (1) the generation and use of hazardous toxic gases in the crystal growth procedure such as molecular beam epitaxy (MBE) and metalorganic chemical vapor deposition (MOCVD), (2) the generation of industrial toxic wastes in the semiconductor process and (3) scarce materials recycling from wastes in the MBE and MOCVD growth procedure

The study of the installation of spent fuel interim storage facility from safety aspect point of view

International Nuclear Information System (INIS)

Djunaidi, Prayogo S.

1999-01-01

The installation of the ISFSF of the RSG-GAS has been come a cureneed, since the RSG-GAS has been operating for more than 10 years. The spent fuel stored in the reactor storage pool in creasing from time to time and therefore a long time storage is needed until the decommissioning of the reactor. The safety aspect related to the installation of the ISFSF has been studied, but the most important aspect are prevention of criticality of the spen fuel in the storage. The radiation dose must be less than that has been recommended by ICRP and the release of the radioactive material must be avoided . In this paper one of the safety aspects i.e. the radiological aspect is described, while the other aspects are referenced to safety analysis report of the facility. From the calculation it can be seen that in accident condition the total radiation dose received by the handling operator is 1.06 mSv and 1.6 mSv resulted from Kr-85 and 1-131. This is lower than the limitation recommended by the ICRP No. 60.1990. Verification for other safety aspect of the facility in still needed

Some aspects of the safety of elderly pedestrians and cyclists.

NARCIS (Netherlands)

Hagenzieker, M.P.

1996-01-01

In this paper some aspects of the safety of elderly pedestrians and cyclists will be addressed. First, fatality data concerning older pedestrians and cyclists will be presented for a number of countries. Then, attention will be paid to fatality rates per 100,000 inhabitants, and the risks of elderly

Radiological and environmental safety aspects of uranium fuel fabrication plants at Nuclear Fuel Complex, Hyderabad

International Nuclear Information System (INIS)

Viswanathan, S.; Surya Rao, B.; Lakshmanan, A.R.; Krishna Rao, T.

1991-01-01

Nuclear Fuel Complex, Hyderabad manufactures uranium dioxide fuel assemblies for PHWRs and BWRs operating in India. Starting materials are magnesium diuranate received from UCIL, Jaduguda and imported UF. Both of these are converted to UO 2 pellets by identical chemical processes and mechanical compacting. Since the uranium handled here is free of daughter product activities, external radiation is not a problem. Inhalation of airborne U compounds is one of the main source of exposure. Engineered protective measures like enclosures around U bearing powder handling equipment and local exhausts reduce worker's exposure. Installation of pre-filters, wet rotoclones and electrostatic precipitators in the ventillation system reduces the release of U into the environment. The criticality hazard in handling slightly enriched uranium is very low due to the built-in control based on geometry and inventory. Where airborne uranium is significant, workers are provided with protective respirators. The workers are regularly monitored for external exposure and also for internal exposure. The environmental releases from the NFC facility is well controlled. Soil, water and air from the NFC environment are routinely collected and analysed for all the possible pollutants. The paper describes the Health Physics experience during the last five years on occupational exposures and on environmental surveillance which reveals the high quality of safety observed in our nuclear fuel fabricating installations. (author). 4 refs., 6 tabs

Summary: Fusion technology, safety and environmental aspects

International Nuclear Information System (INIS)

Matsuda, S.

2003-01-01

The year 2002 was in the middle of successive governmental negotiation toward the start of the ITER Construction. The ITER Engineering Design Activities (EDA) continued until July 2001, and most of the highlighted topics were already reported at the last IAEA Fusion Energy Conference in Montreal or in other opportunities. However, the ITER EDA was followed by the Coordinated Technical Activities that provided a lot of qualitative achievements such as, the search for predictions on operation capabilities based on various data bases and analysis, optimization of the design based on its validating technology R and D. As a consequence, at this conference, major contribution in the field of Fusion Technology was again from ITER, and its related topics occupied about 38% of the total number of contributions of 86. In ITER, physics analysis, predictions and heating/current drive technologies are highlighted. Another key feature at this conference was the progress of study toward steady-state operation in both physics and technology research as well as their application to toroidal devices. Several tokamaks and helical devises are under construction or under design, and most of them incorporate super-conducting magnet for their coils. Studies were made for various types of fusion reactors including Spherical Torus, Tokamaks, Helical systems etc., and their common understandings are progressing through their comparative study. Looking in the near term, but beyond ITER, about 20% of the papers were devoted to the fusion materials and blanket development, with the neutron irradiation facilities for the research. Because of the importance of this field to be implemented in parallel with ITER, more contributions would be expected in future. With these themes in mind, the remaining sections of this paper are arranged in the order of 2) ITER, 3) Toroidal Devices under Construction or under Design, 4) Reactor Technology, 5) Safety and Environment, and 6) Conclusion

Safety of pain control with morphine: new (and old) aspects of ...

African Journals Online (AJOL)

Safety of pain control with morphine: new (and old) aspects of morphine ... In addition, nursing staff failed to recognise that snoring can indicate a dangerously ... monitor of respiratory depression; (iv) training in airway management should be ...

Yearly plan of safety research on environmental radioactivity for 1996 - 2000

International Nuclear Information System (INIS)

1996-01-01

'Yearly Plan of Safety Research on Environmental Radioactivity' proposed from the special meeting for safety research of environmental radioactivity on December 14, 1995 was investigated by Nuclear Safety Commission. And the safety research of environmental radioactivity in Japan was decided to be pursued according to the plan. The contents of this plan consisted of the purpose and the contents of research as well as the research period and the facilities to be done for each theme. The following themes were included; 1) study on environment·radiation dose and study on radiation exposure reduction. 2) study on biological effects of radiation. 3) study on internal exposure by specified nuclides. 4) study on medical measures for acute radiation exposure. 5) study on assessment of nuclear safety. 6) investigation on radioactivities released from various nuclear facilities in Japan to demonstrate their safety. (M.N.)

Opportunities for health and safety professionals in environmental restoration work

International Nuclear Information System (INIS)

Norris, A.E.

1991-01-01

The safety of workers in waste management and in environmental restoration work is regulated in large part by the Occupational Safety and Health Administration (OSHA). Many of the OSHA rules are given in Part 1910, Occupational Safety and Health Standards, of Title 29 of the Code of Federal Regulations (CFR). Section 120 of 29 CFR 1910 specifically addresses hazardous waste operations and emergency response operations. The remainder of this discussion focuses on clean-up operations. The purpose of this paper is to review areas of employment opportunity in environmental restoration work for health and safety professionals. Safety and health risk analyses are mentioned as one area of opportunity, and these analyses are required by the standards. Site safety and health supervisors will be needed during field operations. Those who enjoy teaching might consider helping to meet the training needs that are mandated. Finally, engineering help both to separate workers from hazards and to improve personal protective equipment, when it must be worn, would benefit those actively involved in environmental restoration activities

Nuclear Safety

Energy Technology Data Exchange (ETDEWEB)

Silver, E G [ed.

1989-01-01

This document is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

Safety aspects of nuclear power stations

International Nuclear Information System (INIS)

Binner, W.

1980-01-01

Psychological aspects of the fear of nuclear power are discussed, cancer deaths due to a nuclear accident are predicted and the need for nuclear accident prevention is stressed. A simplified analysis of the safety precautions in a generalised nuclear power station is offered, with reference to loss-of-coolant incidents, and developments in reactor design for fail-safe modes are explained. The importance of learning from the Three Mile Island incident is noted and failure statistics are presented. Tasks to be undertaken at the Austrian Zwentendorf nuclear power station are listed, including improved quality control and acoustic detectors. Precautions against earthquakes are also discussed and it is stated that safe operation of the Zwentendorf station will be achieved. (G.M.E.)

An aspect-oriented approach for designing safety-critical systems

Science.gov (United States)

Petrov, Z.; Zaykov, P. G.; Cardoso, J. P.; Coutinho, J. G. F.; Diniz, P. C.; Luk, W.

The development of avionics systems is typically a tedious and cumbersome process. In addition to the required functions, developers must consider various and often conflicting non-functional requirements such as safety, performance, and energy efficiency. Certainly, an integrated approach with a seamless design flow that is capable of requirements modelling and supporting refinement down to an actual implementation in a traceable way, may lead to a significant acceleration of development cycles. This paper presents an aspect-oriented approach supported by a tool chain that deals with functional and non-functional requirements in an integrated manner. It also discusses how the approach can be applied to development of safety-critical systems and provides experimental results.

Some aspects of environmental management in energy - sector

International Nuclear Information System (INIS)

Burlacu, M.; Burlacu, N.

1996-01-01

Environmental protection issues have exceeded the national borders, they became global. Thus it is necessary to elaborate a unique environmental policy, which will have to take into consideration all the economic aspects of the energy sector in connection with the regional pollution impacts. Energy production units are sever sources of damaging of the environment and that's why it is necessary to implement methods, techniques and environmental managerial instruments. Thus, to ensure a motivational basis for any environmental investment a as complete as possible data supply concerning the air, water and land pollution is needed. This task implies the consideration of all the controllable phenomena and processes dynamics which result in necessity of undertaking the corresponding investigations. The results of this activity are presented in this paper. (author). 1 fig., 5 tabs

Safety aspects of nuclear power plant ageing

International Nuclear Information System (INIS)

1990-01-01

The nuclear community is facing new challenges as commercial nuclear power plants (NPPs) of the first generation get older. At present, some of the plants are approaching or have even exceeded the end of their nominal design life. Experience with fossil fired power plants and in other industries shows that reliability of NPP components, and consequently general plant safety and reliability, may decline in the middle and later years of plant life. Thus, the task of maintaining operational safety and reliability during the entire plant life and especially, in its later years, is of growing importance. Recognizing the potential impact of ageing on plant safety, the IAEA convened a Working Group in 1985 to draft a report to stimulate relevant activities in the Member States. This report provided the basis for the preparation of the present document, which included a review in 1986 by a Technical Committee and the incorporation of relevant results presented at the 1987 IAEA Symposium on the Safety Aspects of the Ageing and Maintenance of NPPs and in available literature. The purpose of the present document is to increase awareness and understanding of the potential impact of ageing on plant safety; of ageing processes; and of the approach and actions needed to manage the ageing of NPP components effectively. Despite the continuing growth in knowledge on the subject during the preparation of this report it nevertheless contains much that will be of interest to a wide technical and managerial audience. Furthermore, more specific technical publications on the evaluation and management of NPP ageing and service life are being developed under the Agency's programme, which is based on the recommendations of its 1988 Advisory Group on NPP ageing. Refs, figs and tabs

Liquefied Gaseous Fuels Safety and Environmental Control Assessment Program: second status report

Energy Technology Data Exchange (ETDEWEB)

1980-10-01

The Assistant Secretary for Environment has responsibility for identifying, characterizing, and ameliorating the environmental, health, and safety issues and public concerns associated with commercial operation of specific energy systems. The need for developing a safety and environmental control assessment for liquefied gaseous fuels was identified by the Environmental and Safety Engineering Division as a result of discussions with various governmental, industry, and academic persons having expertise with respect to the particular materials involved: liquefied natural gas, liquefied petroleum gas, hydrogen, and anhydrous ammonia. This document is arranged in three volumes and reports on progress in the Liquefied Gaseous Fuels (LGF) Safety and Environmental Control Assessment Program made in Fiscal Year (FY)-1979 and early FY-1980. Volume 1 (Executive Summary) describes the background, purpose and organization of the LGF Program and contains summaries of the 25 reports presented in Volumes 2 and 3. Annotated bibliographies on Liquefied Natural Gas (LNG) Safety and Environmental Control Research and on Fire Safety and Hazards of Liquefied Petroleum Gas (LPG) are included in Volume 1.

Safety aspects of nuclear plant licensing in Canada

International Nuclear Information System (INIS)

Jennekens, J.H.F.

1975-01-01

The legislative authority is laid down in the Atomic Energy Control Act, 1946, declaring atomic energy a matter of national interest and establishing the Atomic Energy Control Board (AECB) as the competent body for regulating all aspects of atomic energy. The Act also vests a Minister designated by the Government with research and exploitation functions; thus, by Ministerial order, Atomic Energy of Canada Limited was established in 1952 as a State-owned company. The Nuclear Liability Act, 1970, channels all liability for nuclear damage to the operator of a nuclear installation and requires him to obtain insurance in the amount of $75 million, part of which may be re-insured by the Government. The licensing requirements comprise the issuance of a site approval, a construction licence and an operating licence. The AECB is assisted in its licensing functions by its Nuclear Plant Licensing Directorate and by the Reactor Safety Advisory Committee co-operating with each other in making extensive safety assessments of a licence application. A site evaluation report, a preliminary safety report and a final safety report are required in relation to the siting, construction and operation of a nuclear power plant. The Canadian reactor safety philosophy is based on the concept of defence in depth, implemented through a multi-step approach, which includes avoidance of malfunctions, provision of special safety systems, periodic inspection and testing, and avoidance of human errors. Specific criteria and principles have evolved in applying this basic safety philosophy and radiation protection standards are derived from international recommendations. Stringent control is exercised over the management of radioactive waste and management facilities must meet the engineering and procedural requirements of AECB before they can be placed in operation. (author)

Environmental aspects of the transuranics: a selected, annotated bibliography

Energy Technology Data Exchange (ETDEWEB)

Fore, C.S.; Martin, F.M.; Faust, R.A. (comp.)

1976-07-01

This bibliography of 500 references is compiled from the Data Base on the Environmental Aspects of the Transuranics built to provide information support to the Nevada Applied Ecology Group (NAEG) of ERDA`s Nevada Operations Office. The general scope is environmental aspects of uranium and the transuranic elements, with emphasis on plutonium. Laboratory and field studies dealing with the effects of plutonium-239 on animals are highlighted in this bibliography. Supporting information on ecology of the Nevada Test Site and reviews on the effects of other radionuclides upon man and his environment has been included at the request of the NAEG. The references are arranged by subject category with first authors appearing alphabetically in each category. Indexes are given for author, geographic location, keywords, taxons, permuted title and publication description.

Environmental aspects of the transuranics: a selected, annotated bibliography

International Nuclear Information System (INIS)

Fore, C.S.; Martin, F.M.; Faust, R.A.

1976-07-01

This bibliography of 500 references is compiled from the Data Base on the Environmental Aspects of the Transuranics built to provide information support to the Nevada Applied Ecology Group (NAEG) of ERDA's Nevada Operations Office. The general scope is environmental aspects of uranium and the transuranic elements, with emphasis on plutonium. Laboratory and field studies dealing with the effects of plutonium-239 on animals are highlighted in this bibliography. Supporting information on ecology of the Nevada Test Site and reviews on the effects of other radionuclides upon man and his environment has been included at the request of the NAEG. The references are arranged by subject category with first authors appearing alphabetically in each category. Indexes are given for author, geographic location, keywords, taxons, permuted title and publication description

Safety and regulatory aspects of front end facilities of nuclear fuel cycle

International Nuclear Information System (INIS)

Khan, Kirity Bhushan; Jha, S.K.; Bhasin, Vivek; Behere, P.G.

2017-01-01

Nuclear Fuels Group of BARC consists of various divisions with diverse activities but impeccable safety records. This has been made possible with strict safety culture among trained personnel across all divisions. The major activities of this group encompass the front end fuel fabrication facilities for thermal and fast reactors and post irradiation examination of fuel and structural materials. The group has been responsible for delivering departmental targets, as and when required, fulfilling all safety and security requirements. The present article covers the safety and regulatory aspects of this group with special emphasis on group safety management by the administrative/organizational control, the procedure followed for regulatory review and control which are carried out and the laid down procedures for identifying, classifying and reporting of safety related incidents. (author)

Safety aspect of long-life small safe power reactors

International Nuclear Information System (INIS)

Zaki, S.; Sekimoto, H.

1995-01-01

Safety aspects of several design options of long-life small safe fast power reactors using nitride fuel and lead-bismuth as coolant are discussed. In the present study hypothetical accidents are simulated for these reactors, i.e., unprotected simultaneous ULOF (total loss of primary pumping system) and UTOP (rod run out transient over power) accidents, caused by the simultaneous withdrawal of all control rods. The proposed designs have some important safety characteristics as low reactivity swing (only 0.2-0.25$), and negative coolant void coefficient over whole burnup period. Effectively negative value of all components of reactivity during an accident is observed. The safety performances of the balance, pancake, and tall slender type of core, each of them satisfy reactivity and negative coolant void coefficient constraint, against the above accident are compared. The simulation results show that all of the design options can survive the above accidents without the help of reactor scram and without the need of operator actions. (author)

United States import safety, environmental health, and food safety regulation in China.

Science.gov (United States)

Nyambok, Edward O; Kastner, Justin J

2012-01-01

China boasts a rapidly growing economy and is a leading food exporter. Since China has dominated world export markets in food, electronics, and toys, many safety concerns about Chinese exports have emerged. For example, many countries have had problems with Chinese food products and food-processing ingredients. Factors behind food safety and environmental health problems in China include poor industrial waste management, the use of counterfeit agricultural inputs, inadequate training of farmers on good farm management practices, and weak food safety laws and poor enforcement. In the face of rising import safety problems, the U.S. is now requiring certification of products and foreign importers, pursuing providing incentives to importers who uphold good safety practices, and considering publicizing the names of certified importers.

Theoretical Aspects of Analysis of International Environmental Security

Directory of Open Access Journals (Sweden)

Juliya A. Rusakova

2015-01-01

Full Text Available Abstract: International environmental security is a very hot contemporary issue of world politics, which in a large part defines the future of our environment. Dealing with this issue is of outmost importance since its failure will render all other issues and challenges as negligible. The article examines the theoretical aspects of solving the problem of environmental security. In particular, it analyzes the problem of negative social externalities, and the related concept of "tragedy of the commons." These problems create a fundamental obstacle to the implementation of environmental security at the global level. Traditionally, the problem of externalities in the environmental field have been approached economically, states and their manufacturers were to pay for the externalities in the form of additional taxes. However, experience shows that the economic tools of dealing with environmental security are not effective. The author suggests alternative non-economic approaches: strengthening and developing the system of permanent institutions of international negotiations on environmental security and promotion of environmental awareness. Solving the acute environmental problems is impossible without a change of the political philosophy of the ruling elites in most states.

Health, safety and environmental research program

International Nuclear Information System (INIS)

Dinner, P.J.

1983-01-01

This report outlines the Health, Safety and Environmental Research Program being undertaken by the CFFTP. The Program objectives, relationship to other CFFTP programs, implementation plans and expected outputs are stated. Opportunities to build upon the knowledge and experience gained in safely managing tritium in the CANDU program, by addressing generic questions pertinent to tritium safety for fusion facilities, are identified. These opportunities exist across a broad spectrum of issues covering the anticipated behaviour of tritium in fusion facilities, the surrounding environment and in man

Safety aspects of core power distribution surveillance and control

International Nuclear Information System (INIS)

Beraha, D.; Grumbach, R.; Hoeld, A.; Werner, W.

1978-01-01

The incentives for improved core surveillance and core control systems are outlined. An efficient code for evaluating the power distribution is indispensable for designing and testing such a system. The characteristics of the core simulator QUABOX/CUBBOX and the features required for off-line and on-line applications are described. The important role of the simulator for the safety assessment of a digital core control system is underlined. With regard to the safety aspects of core control, possible disturbances are classified. Simulation results are given concerning the failure of a control actuator. It is shown that means can be devised to prevent unstable behaviour of the control system and, furthermore, to contribute to a safe reactor operation by accounting for process disturbances. (author)

Environmental aspects of the transuranics: a selected, annotated bibliography

International Nuclear Information System (INIS)

Ensminger, J.T.; Martin, F.M.; Fore, C.S.

1977-03-01

This eighth published bibliography of 427 references is compiled from the Nevada Applied Ecology Information Center's Data Base on the Environmental Aspects of the Transuranics. The data base was built to provide information support to the Nevada Applied Ecology Group (NAEG) of ERDA's Nevada Operations Office. The general scope covers environmental aspects of uranium and the transuranic elements, with emphasis on plutonium. This bibliography highlights literature on plutonium 238 and 239 and americium in the critical organs of man and animals. Supporting information on ecology of the Nevada Test Site and reviews and summarizing literature on other radionuclides have been included at the request of the NAEG. The references are arranged by subject category with leading authors appearing alphabetically in each category. Indexes are provided for author(s), geographic location, keyword(s), taxon, title, and publication description

Safety culture aspects of managing for safety. Experience of a large nuclear reprocessing site

International Nuclear Information System (INIS)

Rycraft, H.S.

1996-01-01

The Nuclear Industry is going through turbulent times both in terms of public acceptance and business issues. Safety is one area which impacts on whether the business is allowed to continue, and how an organisation organizes itself. The need to cut costs to make nuclear power a viable energy resource, has forced the nuclear utilities to review manning policies, and management style, and in particular how to maintain safety standards during a period of change, and ultimately support continuing improvement of standards. The shrinking workforce requires a new style of management, one that depends more on the people of the organisation taking responsibility for safety at all levels of the organisation. Not only personal safety but the safety of their colleagues, general public and the environment. The safety culture of an organisation is indivisible from the company culture, each aspect of a culture influences the whole and so the balance between business, safety and quality, has to be managed. BNFL provides a full fuel cycle service to nuclear power plants, and associated services to many national and international organisations. The following notes are taken from the work carried out in the company, and mostly at the Nuclear Reprocessing and Waste storage Site at Sellafield, based in the North West of England. Following the recent re-organisation, the site now employs 6200 people and has a further 1500 contractors working on construction activities on the site. Activities on the site range from remote handling to hands on tasks, involving highly active materials to low level waste. (author)

Annual health, safety and environmental performance report for 1992

International Nuclear Information System (INIS)

Orman, R.F.; Richards, S.

1993-12-01

This report summarizes the safety and environmental record of the operations of Atomic Energy of Canada Limited (AECL) during 1992. An introduction highlights the results and describes the facilities and organizational systems. Subsequent sections indicate the performance of the company with respect to personnel radiation exposures, occupational injuries, the handling of wastes and the release of materials into the environment. Programs in health, safety and environmental protection are presented, along with site remediation and emergency preparedness practices

Annual health, safety and environmental performance report for 1992

International Nuclear Information System (INIS)

Orman, R.F.; Richards, S.

1993-12-01

This report summarizes the safety and environmental record of the operations of Atomic Energy of Canada Limited (AECL) during 1992. an introduction highlights the results and describes the facilities and organizational systems. Subsequent sections indicate the performance of the company with respect to personnel radiation exposures, occupational injuries, the handling of wastes and the release of materials into the environment. Programs in health, safety and environmental protection are presented, along with site remediation and emergency preparedness practices

In situ leaching of uranium: Technical, environmental and economic aspects

International Nuclear Information System (INIS)

1989-01-01

Within the framework of its activities in nuclear raw materials the International Atomic Energy Agency has convened a series of meetings to discuss various aspects of uranium ore processing technology, recovery of uranium from non-conventional resources and development of projects for the production of uranium concentrates including economic aspects. As part of this continuing effort to discuss and document important aspects of uranium production the IAEA convened a Technical Committee Meeting on Technical, Economic and Environmental Aspects of In-Situ Leaching. Although the use of this technique is limited by geological and economic constraints, it has a significant potential to produce uranium at competitive prices. This is especially important in the current uranium market which is mainly characterised by large inventories, excess production capability and low prices. This situation is not expected to last indefinitely but it is unlikely to change drastically in the next ten years or so. This Technical Committee Meeting was held in Vienna from 3 to 6 November 1987 with the attendance of 24 participants from 12 countries. Eight papers were presented. Technical sessions covered in-situ mining research, environmental and licensing aspects and restoration of leached orebodies; the technological status of in-situ leaching, the current status and future prospects of in-situ leaching of uranium in Member States, general aspects of planning and implementation of in-situ projects and the economics of in-situ leaching. Refs, figs and tabs

Nuclear data for radiation damage assessment and related safety aspects

International Nuclear Information System (INIS)

Kocherov, N.P.

1989-12-01

The IAEA Advisory Group Meeting on Nuclear Data for Radiation Damage Assessment and Related Safety Aspects was held at the IAEA Headquarters in Vienna, 19-22 September 1989. This report contains the conclusions and recommendations of this meeting. The papers which the participants prepared for and presented at the meeting will be published as an IAEA Technical Document. (author)

Environmental and Source Monitoring for Purposes of Radiation Protection. Safety Guide (Spanish ed.)

International Nuclear Information System (INIS)

2010-01-01

The purpose of this Safety Guide is to provide international guidance, coherent with contemporary radiation protection principles and IAEA safety requirements, on the strategy of monitoring in relation to: (a) control of radionuclide discharges under practice conditions, and (b) intervention, such as in cases of nuclear or radiological emergencies or past contamination of areas with long lived radionuclides. Three categories of monitoring are discussed: monitoring at the source of the discharge (source monitoring), monitoring in the environment (environmental monitoring) and monitoring of individual exposure in emergencies (individual monitoring). The Safety Guide also provides general guidance on assessment of the doses to critical groups of the population due to the presence of radioactive materials or radiation fields in the environment both from routine operation of nuclear and other related facilities (practice) and from nuclear or radiological emergencies and past contamination of areas with long lived radionuclides (intervention). The dose assessments are based on the results of source monitoring, environmental monitoring, individual monitoring or their combinations. This Safety Guide is primarily intended for use by national regulatory bodies and other agencies involved in national systems of radiation monitoring, as well as by operators of nuclear installations and other facilities where natural or human made radionuclides are treated and monitored. Contents: 1. Introduction; 2. Meeting regulatory requirements for monitoring in practices and interventions; 3. Responsibilities for monitoring; 4. Generic aspects of monitoring programmes; 5. Programmes for monitoring in practices and interventions; 6. Technical conditions for monitoring procedures; 7. Considerations in dose assessment; 8. Interpretation of monitoring results; 9. Quality assurance; 10. Recording of results; 11. Education and training; Glossary.

A multi-objective optimization approach for the selection of working fluids of geothermal facilities: Economic, environmental and social aspects.

Science.gov (United States)

Martínez-Gomez, Juan; Peña-Lamas, Javier; Martín, Mariano; Ponce-Ortega, José María

2017-12-01

The selection of the working fluid for Organic Rankine Cycles has traditionally been addressed from systematic heuristic methods, which perform a characterization and prior selection considering mainly one objective, thus avoiding a selection considering simultaneously the objectives related to sustainability and safety. The objective of this work is to propose a methodology for the optimal selection of the working fluid for Organic Rankine Cycles. The model is presented as a multi-objective approach, which simultaneously considers the economic, environmental and safety aspects. The economic objective function considers the profit obtained by selling the energy produced. Safety was evaluated in terms of individual risk for each of the components of the Organic Rankine Cycles and it was formulated as a function of the operating conditions and hazardous properties of each working fluid. The environmental function is based on carbon dioxide emissions, considering carbon dioxide mitigation, emission due to the use of cooling water as well emissions due material release. The methodology was applied to the case of geothermal facilities to select the optimal working fluid although it can be extended to waste heat recovery. The results show that the hydrocarbons represent better solutions, thus among a list of 24 working fluids, toluene is selected as the best fluid. Copyright © 2017 Elsevier Ltd. All rights reserved.

EMS and process of identification and evaluation of environmental aspects: a proposal methodology

International Nuclear Information System (INIS)

Perotto, E.

2006-01-01

The Environmental Management System (EMS) is an instrument to manage the interaction between the organization and the environment. The scope od EMS is to reduce the environmental impact and to achieve improvements in overall performances. In particular, the focus point of EMS implementation is the method for identifying and assessing significant environmental aspects. The results of the literature and regulation reviews (Perotto 2006) have shown that rigourous repeatable and transparent methodologies do not exist. This paper presents a proposal method for identifying and assessing significant environmental aspects, that has all three of these important characteristics. In particular, the proposal methodology for assessing aspects is based on some criteria that are combined in a specific algorithm. It is important to specify that to make a correct application of the method a preliminary rigorous approach to investigating the environment and the activities of organizations is necessary [it

Safety Aspects of Long Term Spent Fuel Dry Storage

International Nuclear Information System (INIS)

Botsch, Wolfgang; Smalian, S.; Hinterding, P.; Drotleff, H.; Voelzke, H.; Wolff, D.; Kasparek, E.

2014-01-01

As a consequence of the lack of a final repository for spent nuclear fuel (SF) and high level waste (HLW), long term interim storage of SF and HLW will be necessary. As with the storage of all radioactive materials, the long term storage of SF and HLW must conform to safety requirements. Safety aspects such as safe enclosure of radioactive materials, safe removal of decay heat, sub-criticality and avoidance of unnecessary radiation exposure must be achieved throughout the complete storage period. The implementation of these safety requirements can be achieved by dry storage of SF and HLW in casks as well as in other systems such as dry vault storage systems or spent fuel pools, where the latter is neither a dry nor a passive system. After the events of Fukushima, the advantages of passively and inherently safe dry storage systems have become more obvious. In Germany, dry storage of SF in casks fulfils both transport and storage requirements. Mostly, storage facilities are designed as concrete buildings above the ground; one storage facility has also been built as a rock tunnel. In all these facilities the safe enclosure of radioactive materials in dry storage casks is achieved by a double-lid sealing system with surveillance of the sealing system. The safe removal of decay heat is ensured by the design of the storage containers and the storage facility, which also secures to reduce the radiation exposure to acceptable levels. TUV and BAM, who work as independent experts for the competent authorities, inform about spent fuel management and issues concerning dry storage of spent nuclear fuel, based on their long experience in these fields. All relevant safety issues such as safe enclosure, shielding, removal of decay heat and sub-criticality are checked and validated with state-of-the-art methods and computer codes before the license approval. In our presentation we discuss which of these aspects need to be examined closer for a long term interim storage. It is shown

Safety aspects and operating experience of LWR plants in Japan

International Nuclear Information System (INIS)

Aoki, S.; Yoshioka, T.; Toyota, M.; Hinoki, M.

1977-01-01

To develop nuclear power generation for the future, it is necessary to put further emphasis on safety assurance and to endeavour to devise measures to improve plant availability, based on the careful analysis of causes that reduce plant availability. The paper discusses the results of studies on the following items from such viewpoints: (1) Safety and operating experience of LWR nuclear power plants in Japan: operating experience with LWRs; improvements in LWR design during the past ten years; analysis of the factors affecting plant availability; (2) Assurance of safety and measures to increase availability: measures for safety and environmental protection; measures to reduce radiation exposure of employees; appropriateness of maintenance and inspection work; measures to increase plant availability; measures to improve reliability of equipment and components; (3) Future technical problems. (author)

Radiation protection aspects of design for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

. The IAEA takes seriously the enduring challenge for users and regulators everywhere: that of ensuring a high level of safety in the use of nuclear materials and radiation sources around the world. Their continuing utilization for the benefit of humankind must be managed in a safe manner, and the IAEA safety standards are designed to facilitate the achievement of that goal. This Safety Guide has been prepared as a part of the IAEA programme on safety standards for nuclear power plants. It includes recommendations on how to satisfy the requirements established in the Safety Requirements publication on the Safety of Nuclear Power Plants: Design. It addresses the provisions that should be made in the design of nuclear power plants in order to protect site personnel, the public and the environment against radiological hazards for operational states, decommissioning and accident conditions. The recommendations on radiation protection provided in this Safety Guide are consistent with the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS), which were jointly sponsored by the Food and Agriculture Organization of the United Nations (FAO), the IAEA, the International Labour Organisation (ILO), the OECD Nuclear Energy Agency (OECD/NEA), the Pan American Health Organization (PAHO) and the World Health Organization (WHO). This Safety Guide supersedes Safety Series No. 50-SG-D9, Design Aspects of Radiation Protection for Nuclear Power Plants, published in 1985. Effective radiation protection is a combination of good design, high quality construction and proper operation. Procedures that address the radiation protection aspects of operation are covered in the Safety Guide on Radiation Protection and Radioactive Waste Management in the operation of Nuclear Power Plants

The safety and environmental impact of nuclear wastes

International Nuclear Information System (INIS)

Luo Shanggeng

2001-01-01

Radioactive matters were discovered in 1989. Exploitation and using of nuclear energy and nuclear technologies bring mankind huge benefits, but the disposal of radioactive wastes is becoming one of the safety and environmental problems. The author describes six issues related to nuclear wastes. They are as follows: (1) The origin and characteristics of the nuclear wastes; (2) The principles of management of nuclear wastes established by the International Atomic Energy Agency (IAEA) as well as the Chinese '40 words principles' and the major tasks of Chinese nuclear waste management; (3) The treatment and disposal technologies of nuclear wastes and the emphasis on new technologies, waste minimization and exemption and clean release; (4) The safety management of spent radiation sources including technical and administrative measures; (5) The safety management of spent nuclear fuel and the emphasis on high level radioactive wastes to be safety disposed of; (6) The environmental impact of nuclear waste. The author takes the Qinshan Nuclear Power Plant and the Daya bay Nuclear Power Plant I, China, as two examples to prove that nuclear wastes can be safely controlled and managed to ensure environmental safety. The Chinese north-west disposal land of nuclear wastes under operation recently is also discussed. It is believed that the suggested disposal land can ensure the isolation of radioactive wastes and the surrounding environment according to the present standards. The north-west disposal land and the Beilong disposal land, Guangdong province, China, are built according to the international standard and advanced technologies

Which aspects of safety culture predict incident reporting behavior in neonatal intensive care units? A multilevel analysis

NARCIS (Netherlands)

Snijders, Cathelijne; Kollen, Boudewijn J.; van Lingen, Richard A.; Fetter, Willem P. F.; Molendijk, Harry; Kok, J. H.; te Pas, E.; Pas, H.; van der Starre, C.; Bloemendaal, E.; Lopes Cardozo, R. H.; Molenaar, A. M.; Giezen, A.; van Lingen, R. A.; Maat, H. E.; Molendijk, A.; Snijders, C.; Lavrijssen, S.; Mulder, A. L. M.; de Kleine, M. J. K.; Koolen, A. M. P.; Schellekens, M.; Verlaan, W.; Vrancken, S.; Fetter, W. P. F.; Schotman, L.; van der Zwaan, A.; van der Tuijn, Y.; Tibboel, D.; van der Schaaf, T. W.; Klip, H.; Kollen, B. J.

2009-01-01

OBJECTIVES: Safety culture assessments are increasingly used to evaluate patient-safety programs. However, it is not clear which aspects of safety culture are most relevant in understanding incident reporting behavior, and ultimately improving patient safety. The objective of this study was to

Integrated Safety, Environmental and Emergency Management System (ISEEMS)

International Nuclear Information System (INIS)

Silver, R.; Langwell, G.; Thomas, C.; Coffing, S.

1996-01-01

The Risk Management and NEPA (National Environmental Policy Act) Department of Sandia National Laboratories/New Mexico (SNL/NM) recognized the need for hazard and environmental data analysis and management to support the line managers' need to know, understand, manage and document the hazards in their facilities and activities. The Integrated Safety, Environmental, and Emergency Management System (ISEEMS) was developed in response to this need. SNL needed a process that would quickly and easily determine if a facility or project activity contained only standard industrial hazards and therefore require minimal safety documentation, or if non-standard industrial hazards existed which would require more extensive analysis and documentation. Many facilities and project activities at SNL would benefit from the quick screening process used in ISEEMS. In addition, a process was needed that would expedite the NEPA process. ISEEMS takes advantage of the fact that there is some information needed for the NEPA process that is also needed for the safety documentation process. The ISEEMS process enables SNL line organizations to identify and manage hazards and environmental concerns at a level of effort commensurate with the hazards themselves by adopting a necessary and sufficient (graded) approach to compliance. All hazard-related information contained within ISEEMS is location based and can be displayed using on-line maps and building floor plans. This visual representation provides for quick assimilation and analysis

Safety Aspects of Nuclear Waste Treatment

International Nuclear Information System (INIS)

Glubrecht, H.

1986-01-01

In the nuclear fuel cycle - like in most other industrial processes - some waste is produced which can be harmful to the environment and has to be stored safely and isolated from the Biosphere. This radioactive waste can be compared with toxic chemical waste under many aspects, but it has some special features, some of which make its handling more difficult, others make it easier. The difficulties are that radioactive waste does not only affect living organisms after incorporation, but also from some distance through its radiation. Therefore this waste has not only to be encapsuled, but also shielded. At higher concentrations radioactive waste produces heat and this has to be continuously derived from the storage area. On the other hand the control of even extremely small amounts of radioactive waste is very much easier than that of toxic chemical waste due to the high sensitivity of radiation detection methods. Furthermore radioactive waste is not persistent like most of the chemical waste. Of course some components will decay only after millennia, but a high percentage of radioactive waste becomes inactive after days, weeks or years. An important feature of safety aspects related to nuclear waste is the fact that problems of its treatment and storage have been discussed from the very beginning of Nuclear Energy Technology - what has not been the case in relation to most other industrial wastes

Economic aspects of risk assessment in chemical safety

Energy Technology Data Exchange (ETDEWEB)

Drummond, M F; Shannon, H S

1986-05-01

This paper considers how the economic aspects of risk assessment in chemical safety can be strengthened. Its main focus is on how economic appraisal techniques, such as cost-benefit and cost-effectiveness analysis, can be adapted to the requirements of the risk-assessment process. Following a discussion of the main methodological issues raised by the use of economic appraisal, illustrated by examples from the health and safety field, a number of practical issues are discussed. These include the consideration of the distribution of costs, effects and benefits, taking account of uncertainty, risk probabilities and public perception, making the appraisal techniques useful to the early stages of the risk-assessment process and structuring the appraisal to permit continuous feedback to the participants in the risk-assessment process. It is concluded that while the way of thinking embodied in economic appraisal is highly relevant to the consideration of choices in chemical safety, the application of these principles in formal analysis of risk reduction procedures presents a more mixed picture. The main suggestions for improvement in the analyses performed are the undertaking of sensitivity analyses of study results to changes in the key assumptions, the presentation of the distribution of costs and benefits by viewpoint, the comparison of health and safety measures in terms of their incremental cost per life-year (or quality-adjusted life-year) gained and the more frequent retrospective review and revision of the economic analyses that are undertaken.

Safety and environmental aspects of the HYLIFE-II and ARIES fusion reactor designs

International Nuclear Information System (INIS)

Dolan, T.J.; Longhurst, G.R.; Herring, J.S.

1993-01-01

The HYLIFE-II inertial confinement fusion reactor design uses jets of Flibe molten salt to protect the blast chamber walls and to breed tritium. It has a low tritium inventory and effective tritium removal. The issue with this design is not one of safety but of economics. The ARIES reactor designs have safety concerns associated with fires. These reactors designs are described

Annual health, safety and environmental performance report for 1993

Energy Technology Data Exchange (ETDEWEB)

Gallapher, J D; Wright, M G

1994-05-01

This report summarizes the occupational health and safety and the environmental protection record of the operations of Atomic Energy of Canada Limited (AECL) during 1993. An introduction highlights the results and describes the facilities and organizational systems. Subsequent sections indicate the performance of the company with respect to personnel radiation exposures, occupational injuries, the handling of wastes, and the release of materials into the environment. Programs in health, safety and environmental protection are presented, along with site remediation and emergency preparedness practices. (author). 14 figs.

Annual health, safety and environmental performance report for 1993

International Nuclear Information System (INIS)

Gallapher, J.D.; Wright, M.G.

1994-05-01

This report summarizes the occupational health and safety and the environmental protection record of the operations of Atomic Energy of Canada Limited (AECL) during 1993. An introduction highlights the results and describes the facilities and organizational systems. Subsequent sections indicate the performance of the company with respect to personnel radiation exposures, occupational injuries, the handling of wastes, and the release of materials into the environment. Programs in health, safety and environmental protection are presented, along with site remediation and emergency preparedness practices. (author). 14 figs

Environmental, legal and managerial aspects

International Nuclear Information System (INIS)

1978-09-01

This U.S. contribution to the syllabus for Subgroup 5C treats with environmental and ecological aspects specific to fast breeder reactors, physical protection and safeguarding of the FBR cycle, fuel cycle centers (site selection problems for different degrees of collocation) and administrative and legal problems. Decommissioning of an FBR power plant, syllabus item C.1.7, is treated in separate contribution, more information on advanced safeguards for the fast breeder fyel cycle is contained in the contribution, USA WG 5C-tbd. A key conclusion of this is that with safeguards planning initiated early in the development of the FBR fuel cycle, time is available to develop, evaluate, and implement improved safeguards techniques and incorporate them into the design phase of all FBR cycle facilities

SIMBOL test facility. Safety aspects. Amended version; SIMBOL experimenteerfaciliteit. Veiligheidsaspecten. Geamendeerde versie

Energy Technology Data Exchange (ETDEWEB)

Schoonewelle, H.

1995-12-01

A detailed description is given of the bubble chamber SIMBOL at the HOR reactor in Delft, Netherlands, including drawings, applied materials and dimensions. Attention is paid to the nuclear and radiological aspects of the installation and an overview is given of the procedures for the realization, the testing and the operational safety of the chamber. Also the results of a failure and accident analysis are presented. Finally, the dismantlement aspects are dealt with. 5 appendices, 12 refs.

Prospects for the introduction of HTR's: economical and environmental aspects

Energy Technology Data Exchange (ETDEWEB)

NONE

1972-05-03

The working paper describes the economic and environmental aspects related to the introduction of HTRs into the marketplace. The calculation methods available at ISPRA are noted, and the programme for 1972 is outlined.

Environmental problems in the nuclear weapons complex

International Nuclear Information System (INIS)

Fultz, K.O.

1989-04-01

This paper provide the authors' views on the environmental problems facing the Department of Energy. Testimony is based on a large body of work, over 50 reports and testimonies since 1981, on environmental, safety, and health aspects of DOE's nuclear weapons complex. This work has shown that the complex faces a wide variety of serious problem areas including aging facilities, safety concerns which have shut down DOE's production reactors, and environmental cleanup

IAEA effort on the evaluation and management of safety aspects of nuclear power plant ageing

International Nuclear Information System (INIS)

Pachner, J.; Yaremy, E.M.

1991-01-01

The questions attached to nuclear power plant (NPP) ageing and the need for monitoring and assessment of plant condition will grow in importance as more NPPs approach and pass the end of their nominal design lives. Ageing in nuclear plants must be effectively managed to ensure plant safety during their entire service life. This paper provides an overview of the IAEA programme and its results on the evaluation and management of safety aspects of NPP ageing. Under this programme, three generic guidance documents have been prepared on: data collection and record keeping; ageing management methodology; and the use of probabilistic safety assessment in plant life extension considerations. A two pronged strategy involving both technical and regulatory aspects has been adopted for the current and future work. (author)

Role of industry in the environmental health and safety aspects of the developing Plowshare industry

Energy Technology Data Exchange (ETDEWEB)

Hilberry, N [University of Arizona (United States)

1969-07-01

is also upon industry that the primary responsibility for gaining public acceptance will fall and with all other factors 'go' it will be this latter factor, the public's willingness not only to tolerate but actually to 'buy,' that will determine whether there is to be a business or not. Whether or not any proposed commercial application will prove to be economically feasible and whether or not public acceptance can be achieved will depend critically on the nature of the essential health and safety activities required and on the associated costs of these activities. For industry to proceed with effectiveness, three immediate measures are particularly needed. First, a tentative, 'best-as-of-the-moment' health and safety code covering operational procedures and end product specifications should be formulated to serve as a test set of rules for immediate field use and as a concrete, 'point-of-departure' statement in the development of the eventual regulatory code. The upcoming technological feasibility tests in the Plowshare program should then be used to evaluate its commercial applicability and to guide its evolution toward regulatory status. Here joint action is obviously imperative. Next, if the foregoing is to be meaningful, the research and development aspects of these upcoming tests with respect to health and safety, important as they are, must be scrupulously separated, at least cost wise, from the necessary health and safety operational activities as specified in the provisional code. No matter how cogent, considerations of budgetary expedience must not be permitted to intervene either within the Governmental agencies or within the participating industrial organizations. Honest, 'unloaded' operating costs are an absolute must if the tests themselves are to be meaningful. Finally, it must be recognized that time is one of the most significant factors in determining the success or failure of any industrial endeavor. The present case is no exception. The time

Role of industry in the environmental health and safety aspects of the developing Plowshare industry

International Nuclear Information System (INIS)

Hilberry, N.

1969-01-01

is also upon industry that the primary responsibility for gaining public acceptance will fall and with all other factors 'go' it will be this latter factor, the public's willingness not only to tolerate but actually to 'buy,' that will determine whether there is to be a business or not. Whether or not any proposed commercial application will prove to be economically feasible and whether or not public acceptance can be achieved will depend critically on the nature of the essential health and safety activities required and on the associated costs of these activities. For industry to proceed with effectiveness, three immediate measures are particularly needed. First, a tentative, 'best-as-of-the-moment' health and safety code covering operational procedures and end product specifications should be formulated to serve as a test set of rules for immediate field use and as a concrete, 'point-of-departure' statement in the development of the eventual regulatory code. The upcoming technological feasibility tests in the Plowshare program should then be used to evaluate its commercial applicability and to guide its evolution toward regulatory status. Here joint action is obviously imperative. Next, if the foregoing is to be meaningful, the research and development aspects of these upcoming tests with respect to health and safety, important as they are, must be scrupulously separated, at least cost wise, from the necessary health and safety operational activities as specified in the provisional code. No matter how cogent, considerations of budgetary expedience must not be permitted to intervene either within the Governmental agencies or within the participating industrial organizations. Honest, 'unloaded' operating costs are an absolute must if the tests themselves are to be meaningful. Finally, it must be recognized that time is one of the most significant factors in determining the success or failure of any industrial endeavor. The present case is no exception. The time

Developing IAM for Life Cycle Safety Assessment

NARCIS (Netherlands)

Toxopeus, Marten E.; Lutters, Diederick; Nee, Andrew Y.C.; Song, Bin; Ong, Soh-Khim

2013-01-01

This publication discusses aspects of the development of an impact assessment method (IAM) for safety. Compared to the many existing IAM’s for environmentally oriented LCA, this method should translate the impact of a product life cycle on the subject of safety. Moreover, the method should be

Environmental protection and nuclear safety in the European nuclear policy; Umweltschutz und nukleare Sicherheit in der europaeischen Atompolitik

Energy Technology Data Exchange (ETDEWEB)

Frenz, Walter; Ehlenz, Christian [RWTH Aachen (Germany)

2011-07-01

The facilities' security significantly affects the health production of the population and the environmental protection. With the introduction of the Treaty of the European Atomic Energy Community, security aspects were not in the foreground. From today's perspective, the safety aspects were taken into account adequately. The opportunity to adjust the EAG in the framework of the Lisbon Treaty has not been noticed. This is the 54th Declaration to the Final Act of the Intergovernmental Conference which adopted the Lisbon Treaty signed on 13th December, 2007. Till to this date, the factual questions characterized by the risks of use on a broad interpretation of the EAG can be controlled.

Cogeneration plants in Italy: Licensing aspects

International Nuclear Information System (INIS)

Buscaglione, A.

1991-01-01

This paper focusses on administrative/bureaucratic problems relative to the licensing of cogeneration plants in Italy. The current stumbling block appears to lie in organizational difficulties relative to the coordination of various Government authorized safety committees responsible for the drafting up of suitable legislation governing cogeneration plant fire safety aspects. The author cites the possible environmental benefits in terms of air pollution abatement that could have been had with the timely start-up of a new 7 MW plant (in Lombardia) still awaiting its go-ahead authorization

Safety aspects of pulsed YAYOI and Japan Linac Booster

International Nuclear Information System (INIS)

An, S.; Oka, Y.; Wakabayashi, J.

1976-01-01

The paper consists of two parts. The first part is concerned with safety aspects of pulsed YAYOI. Reactivity pulsed operation of YAYOI is performed with reactivity oscillating devices. Inherent safety characteristics due to dilation of metal fuel, a small amount of f.p. build up, reactor operation preserving fuel integrity and experience on transient experiments are the principal basis for safety assurance. Conditions for pulsed operation, namely, maximum allowable temperature, maximum number of repetition of pulsed operation and so on are derived from the consideration on the integrity of fuel. Instrumentation and control systems are reinforced by displacement meter in the core, interlock system, special timer for pulsed operation, additional scram conditions and reactivity meter. Accident analysis and safety evaluation indicate the conservative safety features of the facility. Concerning pulsed operation of YAYOI combined with Linac, special attention must be given to the design of Linac target placed in the core. In the second part are described the principal guide-lines and basic ideas for safety design of Japan Linac Booster (JLB). JLB is a U-Mo fueled and sodium cooled fast reactor with rotating reflector and Linac target in the core. The pulsed neutrons are injected into the core coincidentally with repetitive peaks of reactivity. Design of rotating reflector and Linac target system are the new and important safety problems not yet encountered in the usual sodium fast reactor design. The axis of the rotating reflector is horizontal, which avoids the collision of reflector block with core in the case of failure of rotating reflector. The separate cooling channels for target and the Linac electron beam control system are provided. Reactor shut down and power control systems must be carefully designed. Core meltdown and disassembly accident is considered as a hypothetical accident which is a basis for containment system design. (auth.)

Safety aspects of dry spent fuel storage and spent fuel management

International Nuclear Information System (INIS)

Botsch, W.; Smalian, S.; Hinterding, P.; Voelzke, H.; Wolff, D.; Kasparek, E.

2014-01-01

The storage of spent nuclear fuel (SF) and high-level radioactive waste (HLW) must conform to safety requirements. Safety aspects like safe enclosure of radioactive materials, safe removal of decay heat, nuclear criticality safety and avoidance of unnecessary radiation exposure must be achieved throughout the storage period. The implementation of these safety requirements can be achieved by dry storage of SF and HLW in casks as well as in other systems such as dry vault storage systems or spent fuel pools, where the latter is neither a dry nor a passive system. In Germany dual purpose casks for SF or HLW are used for safe transportation and interim storage. TUV and BAM, who work as independent experts for the competent authorities, present the storage licensing process including sites and casks and inform about spent nuclear fuel management and issues concerning dry storage of spent nuclear fuel, based on their long experience in these fields (authors)

LMFBR: safety aspects

International Nuclear Information System (INIS)

Natta, M.

1990-01-01

This presentation of LMFBR safety is limited at Super Phenix reactor. After a brief description of the reactor, some details on safety systems, in normal or accidental conditions, are given. The main functions studied are: chain reaction trip, residual power evacuation, reactor containment. In heavy accident the behaviour of Super Phenix is studied which its particular characteristics and the possibilities of operators reactions. The probability of appearance and the maximum consequences of heavy accidents are given [fr

Radiation and environmental safety of spent nuclear fuel management options based on direct disposal or reprocessing and disposal of high-level radioactive waste

International Nuclear Information System (INIS)

Vuori, S.

1996-05-01

The report considers the various stages of two nuclear fuel cycle options: direct disposal and reprocessing followed by disposal of vitrified high-level waste. The comparative review is based on the results of previous international studies and concentrates on the radiation and environmental safety aspects of technical solutions based on today's technology. (23 refs., 7 figs., 4 tabs.)

Idaho National Engineering Laboratory (INEL) Environmental Restoration Program (ERP), Baseline Safety Analysis File (BSAF). Revision 1

Energy Technology Data Exchange (ETDEWEB)

1994-06-20

This document was prepared to take the place of a Safety Evaluation Report since the Baseline Safety Analysis File (BSAF)and associated Baseline Technical Safety Requirements (TSR) File do not meet the requirements of a complete safety analysis documentation. Its purpose is to present in summary form the background of how the BSAF and Baseline TSR originated and a description of the process by which it was produced and approved for use in the Environmental Restoration Program.The BSAF is a facility safety reference document for INEL environmental restoration activities including environmental remediation of inactive waste sites and decontamination and decommissioning (D&D) of surplus facilities. The BSAF contains safety bases common to environmental restoration activities and guidelines for performing and documenting safety analysis. The common safety bases can be incorporated by reference into the safety analysis documentation prepared for individual environmental restoration activities with justification and any necessary revisions. The safety analysis guidelines in BSAF provide an accepted method for hazard analysis; analysis of normal, abnormal, and accident conditions; human factors analysis; and derivation of TSRS. The BSAF safety bases and guidelines are graded for environmental restoration activities.

Idaho National Engineering Laboratory (INEL) Environmental Restoration Program (ERP), Baseline Safety Analysis File (BSAF). Revision 1

International Nuclear Information System (INIS)

1994-01-01

This document was prepared to take the place of a Safety Evaluation Report since the Baseline Safety Analysis File (BSAF)and associated Baseline Technical Safety Requirements (TSR) File do not meet the requirements of a complete safety analysis documentation. Its purpose is to present in summary form the background of how the BSAF and Baseline TSR originated and a description of the process by which it was produced and approved for use in the Environmental Restoration Program.The BSAF is a facility safety reference document for INEL environmental restoration activities including environmental remediation of inactive waste sites and decontamination and decommissioning (D ampersand D) of surplus facilities. The BSAF contains safety bases common to environmental restoration activities and guidelines for performing and documenting safety analysis. The common safety bases can be incorporated by reference into the safety analysis documentation prepared for individual environmental restoration activities with justification and any necessary revisions. The safety analysis guidelines in BSAF provide an accepted method for hazard analysis; analysis of normal, abnormal, and accident conditions; human factors analysis; and derivation of TSRS. The BSAF safety bases and guidelines are graded for environmental restoration activities

Radiological safety and environmental surveillance during the mining and milling of beach minerals and processing of monazite

International Nuclear Information System (INIS)

Pillai, P.M.B.; Khan, A.H.

2003-01-01

This paper highlights the occupational and environmental radiological safety aspects and surveillance activities associated with mining and milling of beach minerals and processing of monazite, based on the experience gained over more than three decades of operations of the plants of Indian Rare Earths Ltd, at Chavara (Kerala), Manavalakurichi (Tamilnadu) and Udyogamandal (Kerala). The mining of beach sands, mineral separation and chemical processing of monazite for the recovery of Th and U involve occupational radiation hazards and safety problems of varying magnitudes. This part of the front end of the nuclear fuel cycle involves average per-capita occupational exposures ranging from 1.0 mSv to 8 mSv per year. The collective doses involved work out to 4.5 to 5.4 Person Sieverts per year and involve nearly 1000 radiation workers. Internal exposure contributes to nearly half of the exposure. Mechanization of the operations, process modifications, administrative controls and constant safety surveillance have over the years helped to reduce the exposures and to maintain them at levels as low as reasonably achievable (ALARA). Environmental releases resulting from the operations are well within the limits stipulated by competent authorities and exposures to public from the mining, mineral separation and monazite processing are not significant. (author)

Environmental noise and noise modelling-some aspects in Malaysian development

International Nuclear Information System (INIS)

Leong, Mohd Salman; Mohd Shafiek bin Hj Yaacob

1994-01-01

Environmental noise is of growing concern in Malaysia with the increasing awareness of the need for an environmental quality consistent with improved quality of life. While noise is one of the several elements in an Environmental Impact Assessment report, the degree of emphasis in the assessment is not as thorough as other aspects in the EIA study. The measurements, prediction (if at all any), and evaluation tended to be superficial. The paper presents a summary of correct noise descriptors and annoyance assessment parameters appropriate for the evaluation of environmental noise. The paper further highlights current inadequacies in the Environmental Quality Act for noise pollution, and annoyance assessment. Some examples of local noise pollution are presented. A discussion on environmental noise modelling is presented. Examples illustrating environmental noise modelling for a mining operation and a power station are given. It is the authors' recommendation that environmental noise modelling be made mandatory in all EIA studies such that a more definitive assessment could be realised

Safety aspects of the IFR pyroprocess fuel cycle

International Nuclear Information System (INIS)

Forrester, R.J.; Lineberry, M.J.; Charak, I.; Tessier, J.H.; Solbrig, C.W.; Gabor, J.D.

1989-01-01

This paper addresses the important safety considerations related to the unique Integral Fast Reactor (IFR) fuel cycle technology, the pyroprocess. Argonne has been developing the IFR since 1984. It is a liquid metal cooled reactor, with a unique metal alloy fuel, and it utilizes a radically new fuel cycle. An existing facility, the Hot Fuel Examination Facility-South (HFEF/S) is being modified and equipped to provide a complete demonstration of the fuel cycle. This paper will concentrate on safety aspects of the future HFEF/S operation, slated to begin late next year. HFEF/S is part of Argonne's complex of reactor test facilities located on the Idaho National Engineering Laboratory. HFEF/S was originally put into operation in 1964 as the EBR-II Fuel Cycle Facility (FCF) (Stevenson, 1987). From 1964--69 FCF operated to demonstrate an earlier and incomplete form of today's pyroprocess, recycling some 400 fuel assemblies back to EBR-II. The FCF mission was then changed to one of an irradiated fuels and materials examination facility, hence the name change to HFEF/S. The modifications consist of activities to bring the facility into conformance with today's much more stringent safety standards, and, of course, providing the new process equipment. The pyroprocess and the modifications themselves are described more fully elsewhere (Lineberry, 1987; Chang, 1987). 18 refs., 5 figs., 2 tabs

Sitting Safety Aspects of Second Romanian NPP

International Nuclear Information System (INIS)

Mauna, T.

2010-01-01

The first Romanian NPP CANDU 6 type reactor gone to erection in 1980 on Cernavoda site planned to have 5 units like the Wolsong applied design project for nuclear island. For the BOP parts the ASALDO-GE project was applied with the careful about the interface connection NSP requirements. The new NPP sitting studies began from 1982 in a serious manner as first part on Nuclear Power Plant Romanian Program adopted by political and governmental authorities at the time. For develop the all package of the studies in concordance with the first IAEA Safety Standards recommendations. Till the 1982 the first mission of design and research multi-branch of specialists team was to adapt the NPP Cernavoda project having a open water cooling circuit to the new parameters of close water cooling circuit. But the team was looking at the other type of NPP for sitting. Also in the same time was studied the possibility of NSP foundation on hard less or soft soil foundation strata in connection with safety aspects. The close circuit of cooling water means others parameters of systems and need very large cooling towers. Also must be reconsidering the safety systems design and performance as new solution. In the south of Transylvania historical region in Romania the Olt River run from west to east having medium multi annual flow around 70 m3/s. The Olt River has a chain of small hydropower in operation and other planned. From geological and geophysical points of view two main faults, along the Olt river valley, one of this having seismically small activities was detected. Site region geotechnical studies show small quantity underground natural gas, salt and peat. The initial nuclear program has imposed 4 NPP units site near Olt River. Taking into account the orogenesis, water cooling needs and other local feature can't be built more than two NPP units on a site. This paper tries to reconsider the old analysis from the last IAEA Safety Standards point of view taking into account the new

International Aspects of Nuclear Safety

International Nuclear Information System (INIS)

Lash, T.R.

2000-01-01

Even though not all the world's nations have developed a nuclear power industry, nuclear safety is unquestionably an international issue. Perhaps the most compelling proof is the 1986 accident at Chornobyl nuclear power plant in what is now Ukraine. The U.S. Department of Energy conducts a comprehensive, cooperative effort to reduce risks at Soviet-designed nuclear power plants. In the host countries : Armenia, Ukraine, Russia, Bulgaria, the Czech Republic, Hungary, Lithuania, Slovakia, and Kazakhstan joint projects are correcting major safety deficiencies and establishing nuclear safety infrastructures that will be self-sustaining.The U.S. effort has six primary goals: 1. Operational Safety - Implement the basic elements of operational safety consistent with internationally accepted practices. 2. Training - Improve operator training to internationally accepted standards. 3. Safety Maintenance - Help establish technically effective maintenance programs that can ensure the reliability of safety-related equipment. 4. Safety Systems - Implement safety system improvements consistent with remaining plant lifetimes. 5. Safety Evaluations - Transfer the capability to conduct in-depth plant safety evaluations using internationally accepted methods. 6. Legal and Regulatory Capabilities - Facilitate host-country implementation of necessary laws and regulatory policies consistent with their international treaty obligations governing the safe use of nuclear power

Radiation protection aspects in the design of nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2008-01-01

. The IAEA takes seriously the enduring challenge for users and regulators everywhere: that of ensuring a high level of safety in the use of nuclear materials and radiation sources around the world. Their continuing utilization for the benefit of humankind must be managed in a safe manner, and the IAEA safety standards are designed to facilitate the achievement of that goal. This Safety Guide has been prepared as a part of the IAEA programme on safety standards for nuclear power plants. It includes recommendations on how to satisfy the requirements established in the Safety Requirements publication on the Safety of Nuclear Power Plants: Design. It addresses the provisions that should be made in the design of nuclear power plants in order to protect site personnel, the public and the environment against radiological hazards for operational states, decommissioning and accident conditions. The recommendations on radiation protection provided in this Safety Guide are consistent with the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS), which were jointly sponsored by the Food and Agriculture Organization of the United Nations (FAO), the IAEA, the International Labour Organisation (ILO), the OECD Nuclear Energy Agency (OECD/NEA), the Pan American Health Organization (PAHO) and the World Health Organization (WHO). This Safety Guide supersedes Safety Series No. 50-SG-D9, Design Aspects of Radiation Protection for Nuclear Power Plants, published in 1985. Effective radiation protection is a combination of good design, high quality construction and proper operation. Procedures that address the radiation protection aspects of operation are covered in the Safety Guide on Radiation Protection and Radioactive Waste Management in the operation of Nuclear Power Plants

Methodological Proposal for Identification and Evaluation of Environmental Aspects and Impacts of IPEN Nuclear Facilities: A Case Study Applied to the Nuclear Fuel Center

International Nuclear Information System (INIS)

Mattos, Luis A. Terribile de; Filho, Tufic Madi; Meldonian, Nelson Leon

2013-06-01

This work presents an application of Failure Mode Effect Analysis (FMEA) to the process of identification of environmental aspects and impacts as a part of implementation and maintenance of an Environmental Management System (EMS) in accordance with the ISO 14001 standard. Also, it can contribute, as a complement, to the evaluation and improvement of safety of the installation focused. The study was applied to the Nuclear Fuel Center (CCN) of Nuclear and Energy Research Institute (IPEN), situated at the Campus of University of Sao Paulo, Brazil. The CCN facility has the objective of promoting scientific research and of producing nuclear fuel elements for the IEA-R1 Research Reactor. To identify the environmental aspects of the facility activities, products, and services, a systematic data collection was carried out by means of personal interviews, documents, reports and operation data records consulting. Furthermore, the processes and their interactions, failure modes, besides their causes and effects to the environment, were identified. As a result of a careful evaluation of these causes it was possible to identify and to classify the major potential environmental impacts, in order to set up and put in practice an Environmental Control Plan for the installation under study. The results have demonstrated the validity of the FMEA application to nuclear facility processes, identifying environmental aspects and impacts, whose controls are critical to achieve compliance with the environmental requirements of the Integrated Management System of IPEN. It was demonstrated that the methodology used in this work is a powerful management tool for resolving issues related to the conformity with applicable regulatory and legal requirements of the Brazilian Nuclear Energy Commission (CNEN) and the Brazilian Institute of Environment (IBAMA). (authors)

Establishing Effective Environmental and Safety Performance Indicators: A Best Practice Approach in Uranium Production

International Nuclear Information System (INIS)

Rezansoff, D.; White, G.

2010-01-01

Cameco Corporation (Cameco), with headquarters in Saskatoon, Saskatchewan, Canada, is the world's largest, low-cost uranium producer, currently supplying sufficient uranium to meet 20% of the world's demand. It is characterized by a diverse range of operations in Canada, the United States and Central Asia, for which Cameco is the majority owner and/or operator, including exploration, mining, milling, refining and conversion. Cameco had four business segments: Uranium; Conversion services; Nuclear energy generation; and Gold Also, in 2002, Cameco revised its vision statement to indicate, 'Cameco will be a dominant nuclear energy company producing uranium fuel and generating clean electricity'. Commensurate with this, Cameco has re-confirmed its overall measures of success as follows: A safe, healthy and rewarding workplace; A clean environment; Supportive communities; and Solid financial performance - all reflected in a growing return to shareholders. Like most organizations, Cameco recognizes the importance of conducting its operations in ways that promote continual improvement in environmental and safety performance. Demonstrating the environmental advantages of nuclear is a vital part of the overall best management practices approach. Detractors often try to point to the uranium production side of the nuclear fuel cycle in pursuit of trying to make the case that the nuclear option does not carry any special environmental advantage. These attempts are mostly based on performance from eras past, not modern performance. The uranium sector must be able to present its case in a modern context, which is largely based on sustainable development principles. This paper focuses on establishing environment and safety performance indicators for the uranium production and conversion aspects of Cameco's business, as well as in support of the environmental advantages of nuclear energy generation

The aspect of personnel metal attitude in the production safety

International Nuclear Information System (INIS)

Joyosukarto, Priyanto M.

2002-01-01

The occurrence of an accident could always be traced to component/system failures and/or human error. The two factors are closely related to competency of the personnel's involved, in which mental attitude is a decisive factor. Furthermore mental attitude could be viewed as an element of Safety (S) Culture. Consequently, S. Culture could might created or at lea ts, be enhanced by the introduction of appropriate values, norms, as well as attitudes. The ABC and TBC of safety norm have been discussed briefly. Whereas mental attitude has been defined and discussed in detail and graded into six levels, namely: attending, responding, complying, accepting, preferring, and integrating. To assure highest level of safety, personnel must achieve integrating level of attitude, in the sense that he would merely do an action on the basis of safety values and/or norms prevailing in the system, not due to external pressure. Furthermore, considering the work as a physical and an emotional activity resulting in stress and strain on the body, Karate exercises have been promoted as an alternative for enhancing mental attitude by means of reducing personnel vulnerability to strain and stress. This method is accomplished by exploiting Roux's Low of conditioning effect and by implementation of an in-depth understanding on the spiritual aspect of Karate. It is concluded that in the field of production safety, there is a positive correlation between Karate, mental attitude, competence, performance, quality, and safety

Manual for summarising and evaluating the environmental aspects of pesticides

NARCIS (Netherlands)

Mensink BJWG; Montforts M; Wijkhuizen-Maslankiewicz L; Tibosch H; Linders JBHJ; ACT

1995-01-01

This Manual gives guidance in summarising and evaluating the environmental aspects of agricultural and non-agricultural pesticides. Actually this is the part of the pesticide registration process in the Netherlands preceding the risk assessment. The requirements of the Dutch government for

Guidance for implementing an environmental, safety, and health-assurance program. Volume 15. A model plan for line organization environmental, safety, and health-assurance programs

Energy Technology Data Exchange (ETDEWEB)

Ellingson, A.C.; Trauth, C.A. Jr.

1982-01-01

This is 1 of 15 documents designed to illustrate how an Environmental, Safety and Health (ES and H) Assurance Program may be implemented. The generic definition of ES and H Assurance Programs is given in a companion document entitled An Environmental, Safety and Health Assurance Program Standard. This particular document presents a model operational-level ES and H Assurance Program that may be used as a guide by an operational-level organization in developing its own plan. The model presented here reflects the guidance given in the total series of 15 documents.

Safety aspects of nuclear plants coupled with seawater desalination units

International Nuclear Information System (INIS)

2001-08-01

The purpose of this publication is to address the safety and licensing aspects of nuclear power plants for which a significant portion of the heat energy produced by the reactor is intended for use in heat utilization applications. Although intended to cover the broad spectrum of nuclear heat applications, the focus of the discussion will be the desalination of sea water using nuclear power plants as the energy source for the desalination process

Fusion-fission hybrids: environmental aspects and their role in hybrid rationale

International Nuclear Information System (INIS)

Holdren, J.P.

1981-01-01

The rationale for developing hybrids depends on real or perceived liabilities of relying on pure fission to do the same job. Quite possibly the main constraint on expanded use of fission will be neither lack of fuel nor high costs, but perceived environmental liabilities - radioactive wastes, reactor safety, and links to nuclear weaponry. The environmental characteristics of hybrid systems and pure-fisson systems are compared here in detail. The findings are that significant environmental advantages for hybrids cannot now be demonstrated and may not exist. Therefore, if environmental drawbacks constrain the application of pure fission, hybrids probably also will be thus constrained

Health and safety plan for operations performed for the Environmental Restoration Program

Energy Technology Data Exchange (ETDEWEB)

Trippet, W.A. II (IT Corp., (United States)); Reneau, M.; Morton, S.L. (EG and G Idaho, Inc., Idaho Falls, ID (United States))

1992-04-01

This document constitutes the generic health and safety plan for the Environmental Restoration Program (ERP). It addresses the health and safety requirements of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA); Occupational Safety and Health Administration (OSHA) 29 CFR 1910.120 standard; and EG G Idaho, Inc. This plan is a guide to individuals who must complete a health and safety plan for a task performed for the EPR. It contains a task specific addendum that, when completed, specifically addresses task specific health and safety issues. This health and safety plan reduces the time it takes to write a task specific health and safety plan by providing discussions of requirements, guidance on where specific information is located, and specific topics in the Addendum that must be discussed at a task level. This format encourages a complete task specific health and safety plan and a standard for all health and safety plans written for ERP.

Health and safety plan for operations performed for the Environmental Restoration Program

International Nuclear Information System (INIS)

Trippet, W.A. II; Reneau, M.; Morton, S.L.

1992-04-01

This document constitutes the generic health and safety plan for the Environmental Restoration Program (ERP). It addresses the health and safety requirements of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA); Occupational Safety and Health Administration (OSHA) 29 CFR 1910.120 standard; and EG ampersand G Idaho, Inc. This plan is a guide to individuals who must complete a health and safety plan for a task performed for the EPR. It contains a task specific addendum that, when completed, specifically addresses task specific health and safety issues. This health and safety plan reduces the time it takes to write a task specific health and safety plan by providing discussions of requirements, guidance on where specific information is located, and specific topics in the Addendum that must be discussed at a task level. This format encourages a complete task specific health and safety plan and a standard for all health and safety plans written for ERP

Safety aspects of nuclear power plants nearby urban areas

International Nuclear Information System (INIS)

Kroeger, W.

1986-01-01

According to the Environmental Experts Council smaller reactors would correspond best to the heat demand of the Federal Republic of Germany. The study discusses and investigates into the present safety concepts and site selection criteria, trends towards power plant sites nearby urban areas, site-dependent parameters and their influence on the extent of damage, protective aims, compatibility of the protective aims proposed, and the protective measures required. (DG) [de

Road lighting for safety.

NARCIS (Netherlands)

Schreuder, D.A.

2000-01-01

This book is aimed at broad readership, not especially at lighting experts. Lighting is presented as a system, as part of the public highway. Much attention is paid to subjects not greatly covered in the specialist literature, such as environmental aspects, traffic safety, crime prevention, and the

EDRP public local inquiry, UKAEA/BNFL precognition on: Safety aspects of EDRP

International Nuclear Information System (INIS)

Brown, M.L.

1986-01-01

The safety of the proposed EDRP is discussed, paying particular attention to the environmental impact in both normal operation, and in abnormal or accident conditions. The radiological exposure resulting from EDRP discharges during normal operation is estimated. Design measures for ensuring worker and public safety during both routine and non-routine operation are outlined. The strategy for considering unlikely but potentially more serious accidents in EDRP design is outlined. (U.K.)

Environmental and Ethical Aspects of Sustainable Mining in Greenland

DEFF Research Database (Denmark)

Hansen, Sinne Hjælmsø; Pedersen, Lise Celine; Vilsgaard, Kristine Duelund

2013-01-01

The increased use of scarce metals in combination with climate changes pave way for extensive extraction of mineral resources in Greenland. The focus of this study is on environmental ethical aspects of mining activities in a vulnerable and unspoiled arctic nature. Mining can have several economic...... and social benefits for Greenland. On the other hand, the environmental impacts from mining are well known. Through DPSIR (Drivers, Pressures, States, Impacts, Responses) and Stakeholder analysis, we assess how future mining in Greenland can be sustainably implemented. The analysis revealed that numerous...... stakeholders have to be taken into consideration with a wide range of different interests. The DPSIR analysis clarified the availability of various potential political responses that could affect the drivers, pressures, states and impacts of mining mainly focused on implementation of effective environmental...

Safety and ethical aspects on retrievability: A Swedish nuclear regulator's view

International Nuclear Information System (INIS)

Toverud, Oe.; Wingefors, S.

2000-01-01

An important contribution to the discussion on retrieval in Sweden has been the ethical principle of the Swedish National Council for Nuclear Waste (KASAM). ''The KASAM Principle'' means that the present generation, which has reaped the benefits of nuclear energy, must also take care of the waste and not transfer the responsibility to future generations; a repository should be designed and constructed so that monitoring and remedial actions are not necessary in the future. However, future generations, probably with better knowledge and other values, must still have the freedom to make their own decisions; we should therefore not make monitoring and remedial action unnecessarily difficult. SKI generally supports the KASAM principle but its application in the individual case should be based on solid evidence that both aspects have been covered in a suggested repository design. There may be a number of possible reasons for retrieval of spent nuclear fuel from a repository and they range from technical to purely political. SKI supports that the repository shall not be designed so that it unnecessarily impairs future attempts to retrieve the waste, monitor or ''repair'' the repository. However, measures to facilitate any kind of access to the repository must not reduce the long term safety of the repository. SKI concludes that: Future generations may wish to retrieve the spent fuel from a sealed repository. Disposal method and repository design should consider this and not make such retrieval unnecessarily difficult. On the other hand, any measures taken to facilitate retrieval must not significantly impair the long term safety functions of the repository. It must be shown that the safety aspects have been adequately considered. Retrievability must always be discussed with caution, so that it will not give the impression of doubts concerning the safety of the repository. (author)

Environmental Restoration Disposal Facility (Project W-296) Safety Assessment

International Nuclear Information System (INIS)

Armstrong, D.L.

1994-08-01

This Safety Assessment is based on information derived from the Conceptual Design Report for the Environmental Restoration Disposal Facility (DOE/RL 1994) and ancillary documentation developed during the conceptual design phase of Project W-296. The Safety Assessment has been prepared to support the Solid Waste Burial Ground Interim Safety Basis document. The purpose of the Safety Assessment is to provide an evaluation of the design to determine if the process, as proposed, will comply with US Department of Energy (DOE) Limits for radioactive and hazardous material exposures and be acceptable from an overall health and safety standpoint. The evaluation considered affects on the worker, onsite personnel, the public, and the environment

Environmental Restoration Disposal Facility (Project W-296) Safety Assessment

Energy Technology Data Exchange (ETDEWEB)

Armstrong, D.L.

1994-08-01

This Safety Assessment is based on information derived from the Conceptual Design Report for the Environmental Restoration Disposal Facility (DOE/RL 1994) and ancillary documentation developed during the conceptual design phase of Project W-296. The Safety Assessment has been prepared to support the Solid Waste Burial Ground Interim Safety Basis document. The purpose of the Safety Assessment is to provide an evaluation of the design to determine if the process, as proposed, will comply with US Department of Energy (DOE) Limits for radioactive and hazardous material exposures and be acceptable from an overall health and safety standpoint. The evaluation considered affects on the worker, onsite personnel, the public, and the environment.

Environmental Safety and Health Analytical Laboratory, Pantex Plant, Amarillo, Texas. Final Environmental Assessment

International Nuclear Information System (INIS)

1995-06-01

The US Department of Energy (DOE) has prepared an Environmental Assessment (EA) of the construction and operation of an Environmental Safety and Health (ES ampersand H) Analytical Laboratory and subsequent demolition of the existing Analytical Chemistry Laboratory building at Pantex Plant near Amarillo, Texas. In accordance with the Council on Environmental Quality requirements contained in 40 CFR 1500--1508.9, the Environmental Assessment examined the environmental impacts of the Proposed Action and discussed potential alternatives. Based on the analysis of impacts in the EA, conducting the proposed action, construction of an analytical laboratory and demolition of the existing facility, would not significantly effect the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 (NEPA) and the Council on Environmental Quality regulations in 40 CFR 1508.18 and 1508.27

Ship inspection strategies: effects on maritime safety and environmental protection

NARCIS (Netherlands)

Heij, C.; Bijwaard, G.E.; Knapp, S.

2011-01-01

Global trade largely depends on maritime transport, and appropriate ships are needed to protect cargo but to minimize environmental damage and to this end, flag and port state authorities expend considerable effort in ship safety inspections. This paper investigates the safety gains of current

The food and environmental safety of Bt crops

Science.gov (United States)

Koch, Michael S.; Ward, Jason M.; Levine, Steven L.; Baum, James A.; Vicini, John L.; Hammond, Bruce G.

2015-01-01

Bacillus thuringiensis (Bt) microbial pesticides have a 50-year history of safety in agriculture. Cry proteins are among the active insecticidal ingredients in these pesticides, and genes coding for Cry proteins have been introduced into agricultural crops using modern biotechnology. The Cry gene sequences are often modified to enable effective expression in planta and several Cry proteins have been modified to increase biological activity against the target pest(s). Additionally, the domains of different but structurally conserved Cry proteins can be combined to produce chimeric proteins with enhanced insecticidal properties. Environmental studies are performed and include invertebrates, mammals, and avian species. Mammalian studies used to support the food and feed safety assessment are also used to support the wild mammal assessment. In addition to the NTO assessment, the environmental assessment includes a comparative assessment between the Bt crop and the appropriate conventional control that is genetically similar but lacks the introduced trait to address unintended effects. Specific phenotypic, agronomic, and ecological characteristics are measured in the Bt crop and the conventional control to evaluate whether the introduction of the insect resistance has resulted in any changes that might cause ecological harm in terms of altered weed characteristics, susceptibility to pests, or adverse environmental impact. Additionally, environmental interaction data are collected in field experiments for Bt crop to evaluate potential adverse effects. Further to the agronomic and phenotypic evaluation, potential movement of transgenes from a genetically modified crop plants into wild relatives is assessed for a new pest resistance gene in a new crop. This review summarizes the evidence for safety of crops containing Cry proteins for humans, livestock, and other non-target organisms. PMID:25972882

The food and environmental safety of Bt crops.

Science.gov (United States)

Koch, Michael S; Ward, Jason M; Levine, Steven L; Baum, James A; Vicini, John L; Hammond, Bruce G

2015-01-01

Bacillus thuringiensis (Bt) microbial pesticides have a 50-year history of safety in agriculture. Cry proteins are among the active insecticidal ingredients in these pesticides, and genes coding for Cry proteins have been introduced into agricultural crops using modern biotechnology. The Cry gene sequences are often modified to enable effective expression in planta and several Cry proteins have been modified to increase biological activity against the target pest(s). Additionally, the domains of different but structurally conserved Cry proteins can be combined to produce chimeric proteins with enhanced insecticidal properties. Environmental studies are performed and include invertebrates, mammals, and avian species. Mammalian studies used to support the food and feed safety assessment are also used to support the wild mammal assessment. In addition to the NTO assessment, the environmental assessment includes a comparative assessment between the Bt crop and the appropriate conventional control that is genetically similar but lacks the introduced trait to address unintended effects. Specific phenotypic, agronomic, and ecological characteristics are measured in the Bt crop and the conventional control to evaluate whether the introduction of the insect resistance has resulted in any changes that might cause ecological harm in terms of altered weed characteristics, susceptibility to pests, or adverse environmental impact. Additionally, environmental interaction data are collected in field experiments for Bt crop to evaluate potential adverse effects. Further to the agronomic and phenotypic evaluation, potential movement of transgenes from a genetically modified crop plants into wild relatives is assessed for a new pest resistance gene in a new crop. This review summarizes the evidence for safety of crops containing Cry proteins for humans, livestock, and other non-target organisms.

EDRP public local inquiry, UKAEA/BNFL precognition on: Aspects of Dounreay safety and local liaison relevant to EDRP

International Nuclear Information System (INIS)

Blumfield, C.W.

1986-01-01

Aspects of safety at Dounreay Nuclear Establishment, including legislation, design safety, industrial safety and radiation monitoring procedures, are discussed. The arrangements for action in an emergency are outlined. Liaison between DNE and the local community, formal and informal, is summarised. (U.K.)

A new approach to determine the environmental qualification requirements for the safety related equipment

International Nuclear Information System (INIS)

Hasnaoui, C.; Parent, G.

2000-01-01

The objective of the environmental qualification of safety related equipment is to ensure that the plant defense-in-depth is not compromised by common mode failures following design basis accidents with a harsh environment. A new approach based on safety functions has been developed to determine what safety-related equipment is required to function during and after a design basis accident, as well as their environmental qualification requirements. The main feature of this approach is to use auxiliary safety functions established from safety requirements as credited in the safety analyses. This approach is undertaken in three steps: identification of the auxiliary safety functions of each main safety function; determination of the main equipment groups required for each auxiliary safety function; and review of the safety analyses for design basis accidents in order to determine the credited auxiliary safety functions and their mission times for each accident scenario. Some of the benefits of the proposed approach for the determination of the safety environmental qualification requirements are: a systematic approach for the review of safety analyses based on a safety function check list, and the insurance, with the availability of the safety functions, that Gentilly-2 defense-in-depth would not be compromised by design basis accidents with a harsh environment. (author)

Regulatory aspects of radiation sources safety in Albania

International Nuclear Information System (INIS)

Dollani, K.; Kushe, R.

1998-01-01

In this paper are presented the regulatory aspects of the radiation sources safety in Albania, based in the new Radiological Protection Act and Regulations. The radiation protection infrastructures and procedures are described as well as their functioning for the implementation of relevant activities such as licensing and regular inspection, personal dose monitoring, emergency preparedness which are developed in the frame of the IAEA Technical Co-operation Programme. The issue of the security of radiation sources is dealt in close relation with the preparation and use of the inventory of all radiation sources in the country. A special attention is paid to the identification and location of lost sources for their finding and secure storage. (author)

Environmental Regulation and Food Safety: Studies of Protection ...

International Development Research Centre (IDRC) Digital Library (Canada)

2006-01-01

Jan 1, 2006 ... Book cover Environmental Regulation and Food Safety: Studies of ... are sometimes perceived in developing countries as nontariff barriers to trade. ... In some cases, products that had initially been refused access to a ...

41 CFR 102-80.10 - What are the basic safety and environmental management policies for real property?

Science.gov (United States)

2010-07-01

... safety and environmental management policies for real property? 102-80.10 Section 102-80.10 Public... MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT General Provisions § 102-80.10 What are the basic safety and environmental management policies for real property? The basic safety and...

Environmental and Occupational Safety Division annual progress report for 1983

International Nuclear Information System (INIS)

1984-11-01

This report presents summaries of activities conducted during 1983 in the following areas: radiation monitoring; health physics instrumentation development; environmental management; atmospheric monitoring; water monitoring; background radiation measurements; soil and grass samples; deer samples; calculation of potential radiation dose to the public; industrial safety; and operational safety

Safety aspects

International Nuclear Information System (INIS)

Wider, H.U.

1997-01-01

It is assumed that in an accelerator-driven system (ADS) the same type of accidents can be envisaged as in critical reactors. After briefly describing the basic safety features of ADS, the first investigations of the behaviour of an accelerator driven fast oxide reactor during an unprotected loss-of-flow accident and the investigation of reactivity accidents in a large sodium-cooled ADS are presented

Environmental aspects at radiological protection in ArcelorMittal Monlevade

International Nuclear Information System (INIS)

Silva Filho, Cleber Marques; Soares Filho, Mauricio; Franco, Jose Otavio Andrade; Leite, Roberto Paulo; Goncalves, Breno Cunha; Costa, Jose Gustavo de Souza

2010-01-01

ArcelorMittal Monlevade Environmental Management of Radiological Protection is based on radiological protection team training, start up of radioactivity materials detection equipment in several steps of industrial processes and internal procedures according to CNEN - Nuclear Energy National Commission guidelines. At this way ArcelorMittal Monlevade seeks to guarantee the safety of employees, community, customers, equipment and the environment and their business. (author)

78 FR 50079 - Information Collection Activities: Safety and Environmental Management Systems (SEMS); Proposed...

Science.gov (United States)

2013-08-16

... DEPARTMENT OF THE INTERIOR Bureau of Safety and Environmental Enforcement [Docket ID BSEE-2013-0005; OMB Control Number 1014-0017: 134E1700D2 EEEE500000 ET1SF0000.DAQ000] Information Collection Activities: Safety and Environmental Management Systems (SEMS); Proposed Collection; Comment Request...

Ship Inspection Strategies: Effects on Maritime Safety and Environmental Protection

NARCIS (Netherlands)

C. Heij (Christiaan); G.E. Bijwaard (Govert); S. Knapp (Sabine)

2010-01-01

textabstractGlobal trade depends for a large part on maritime transport, and safe ships are needed not only to protect precious cargo but also to prevent environmental damage. Flag state and port state authorities spend much effort in ship safety inspections to ensure a minimum safety level and to

Developing necessary and sufficient sets of environmental, safety, and health standards at the Department of Energy

International Nuclear Information System (INIS)

Nelson, D.B.; Troy, A.W.

1995-01-01

The U.S. Department of Energy (DOE) is committed to protect its workers, the public, and the environment. To do this, we must understand our work and its potential hazards and tailor our protection to those hazards. Until now, the DOE has regulated environmental, safety, and health aspects of our work through orders and, more recently, through rules. However, it has become apparent that our current approach suffers from several disadvantages. Most notably, it has been difficult to craft orders that recognize and deal effectively with the wide diversity in our work; this can lead to inappropriate requirements and can even compromise safety. Also, the current approach does not easily incorporate the benefits of experience; our practices can become obsolete or ineffectual. This report describes efforts of DOE towards the development of an integrated standards program as the basis for ensuring the protection of workers, public and the environment

LMFBR conceptual design study: an overview of environmental and safety concerns

International Nuclear Information System (INIS)

Brenchley, D.L.

1981-06-01

The US Department of Energy (DOE) initiated the Liquid Metal Fast Breeder (LMFBR) Conceptual Design Study (CDS) with the objective of maintaining a viable breeder option. The project is scheduled to be completed in FY-1981 but decisions regarding plant construction will be delayed until at least 1985. This report provides a review of the potential environmental and safety engineering concerns for the CDS and recommends specific action for the Environmental and Safety Engineering Division of DOE

LMFBR conceptual design study: an overview of environmental and safety concerns

Energy Technology Data Exchange (ETDEWEB)

Brenchley, D.L.

1981-06-01

The US Department of Energy (DOE) initiated the Liquid Metal Fast Breeder (LMFBR) Conceptual Design Study (CDS) with the objective of maintaining a viable breeder option. The project is scheduled to be completed in FY-1981 but decisions regarding plant construction will be delayed until at least 1985. This report provides a review of the potential environmental and safety engineering concerns for the CDS and recommends specific action for the Environmental and Safety Engineering Division of DOE.

IAEA Safety Standards on Management Systems and Safety Culture

International Nuclear Information System (INIS)

Persson, Kerstin Dahlgren

2007-01-01

The IAEA has developed a new set of Safety Standard for applying an integrated Management System for facilities and activities. The objective of the new Safety Standards is to define requirements and provide guidance for establishing, implementing, assessing and continually improving a Management System that integrates safety, health, environmental, security, quality and economic related elements to ensure that safety is properly taken into account in all the activities of an organization. With an integrated approach to management system it is also necessary to include the aspect of culture, where the organizational culture and safety culture is seen as crucial elements of the successful implementation of this management system and the attainment of all the goals and particularly the safety goals of the organization. The IAEA has developed a set of service aimed at assisting it's Member States in establishing. Implementing, assessing and continually improving an integrated management system. (author)

Environmental and safety issues of the fusion fuel cycle

International Nuclear Information System (INIS)

Crocker, J.G.

1980-01-01

This paper discusses the environmental and safety concerns inherent in the development of fusion energy, and the current Department of Energy programs seeking to: (1) develop safe and reliable techniques for tritium control; (2) reduce the quantity of activation products produced; and (3) provide designs to limit the potential for accidents that could result in release of radioactive materials. Because of the inherent safety features of fusion and the early start that has been made in safety problem recognition and solution, fusion should be among the lower risk technologies for generation of commercial power

Teaching the Ethical Aspects of Environmental Science

Science.gov (United States)

Palinkas, C. M.

2014-12-01

Environmental and societal issues are often inherently linked, especially in coastal and estuarine environments, and science and social values must often be balanced in ecosystem management and decision-making. A new seminar course has been developed for the Marine Estuarine and Environmental Science (MEES) graduate program, an inter-institutional program within the University System of Maryland, to examine these issues. This 1-credit course, offered for the first time in Spring 2015, takes a complex systems perspective on major environmental and societal challenges to examine these linked issues in a variety of contexts. After a brief introduction to the emerging field of "geoethics," students develop a list of issues to examine throughout the seminar. Example topics could include fracking, offshore wind technology, dam removal, and iron fertilization, among others. A case-study approach is taken, with each class meeting focusing on one issue. For each case study, students are asked to 1) identify relevant scientific principles and major knowledge gaps, 2) predict potential outcomes, 3) identify stakeholders and likely viewpoints, and 4) construct communication plans to disseminate findings to these stakeholders. At the end of the semester, students give a brief presentation of the ethical aspects of their own research topics.

Health and Safety annual report 1993

International Nuclear Information System (INIS)

1994-01-01

In the 1993 Health and Safety Report for BNFL, data showing improvements in radiological and conventional safety are given. Other aspects discussed are emergency planning, the level of incidents, occupational health services, litigation and the compensation scheme, the transport of radioactive materials, research covering transgenerational epidemiology, mortality and cancer studies, genetics and radiobiology, and dosimetry, and finally a summary of radioactive discharges and environmental data. (UK)

Health and environmental aspects of nuclear fuel cycle facilities

International Nuclear Information System (INIS)

1996-11-01

The purpose of the present publication is to give a generic description of health and environmental aspects of nuclear fuel cycle facilities. Primarily the report is meant to stand alone; however, because of the content of the publication and in the context of the DECADES project, it may serve as a means of introducing specialists in other fuel cycles to the nuclear fuel cycle. Refs, figs, tabs

Environmental Development Plan for advanced isotope separation

International Nuclear Information System (INIS)

1979-05-01

This EDP identifies the planning and management requirements and schedules needed to evaluate and assess the environmental, health, and safety aspects of the Advanced Isotope Separation (AIS) program. Current AIS processes include the molecular and atomic vapor laser processes and the plasma process. This document covers the technology program, environmental concerns and requirements, and environmental strategy

Guidance for implementing an environmental, safety and health assurance program. Volume 2. A model plan for environmental, safety and health staff audits and appraisals

International Nuclear Information System (INIS)

Ellingson, A.C.

1980-09-01

This is 1 of 15 documents designed to illustrate how an Environmental, Safety and Health (ES and H) Assurance Program may be implemented. The generic definition of ES and H Assurance Programs is given in a companion document entitled An Environmental, Safety and Health Assurance Program Standard. This document is concerned with ES and H audit and appraisal activities of an ES and H Staff Organization as they might be performed in an institution whose ES and H program is based upon the ES and H Assurance Program Standard. An annotated model plan for ES and H Staff audits and appraisals is presented and discussed

Guidance for implementing an environmental, safety, and health assurance program. Volume 10. Model guidlines for line organization environmental, safety and health audits and appraisals

International Nuclear Information System (INIS)

Ellingson, A.C.

1981-10-01

This is 1 of 15 documents designed to illustrate how an Environmental, Safety and Health (ES and H) Assurance Program may be implemented. The generic definition of ES and H Assurance Programs is given in a companion document entitled An Environmental, Safety and Health Assurance Program Standard. The Standard specifies that the operational level of an institution must have an internal assurance function, and this document provides guidance for the audit/appraisal portion of the operational level's ES and H program. The appendixes include an ES and H audit checklist, a sample element rating guide, and a sample audit plan for working level line organization internal audits

Safety aspects of the desalination of sea water using nuclear energy

International Nuclear Information System (INIS)

Carnino, A.; Gasparini, N.

2001-01-01

The nuclear plants for desalination to be built in the future will have to meet the standards of safety required for the best nuclear power plants currently in operation or being designed. Some specific characteristics of desalination plants such as siting and coupling require particular consideration from a safety point of view, and further safety studies will be needed when the type and size of the reactor are determined. The current safety approach, based on the defence in depth strategy, has been shown to be a sound foundation for the safety and protection of public health, and gives the plant the capability of dealing with a large variety of sequences, even beyond the design basis. The Department of Nuclear Safety of the IAEA is involved in many activities, the most important of which are to establish safety standards, and to provide various safety services and technical knowledge in many Technical Co-operation assistance projects. The department is also involved in other safety areas, notably in the field of future reactors. The IAEA is carrying out a project on the safety of new generation reactors, including those used for desalination, with the objective of fostering an exchange of information on safety approaches, promoting harmonization among Member States and contributing towards the development and revision of safety standards and guidelines for nuclear power plant design. The safety, regulatory and environmental concerns in nuclear powered desalination are those related directly to nuclear power plants, with due consideration given to the coupling process. The protection of product water against radioactive contamination must be ensured. An effective infrastructure, including appropriate training, a legal framework and regulatory regime, is a prerequisite to considering use of nuclear power for desalination plants, also in those countries with limited industrial infrastructures and little experience in nuclear technology or safety. (author)

Personal, situational and organizational aspects that influence the impact of patient safety incidents: A qualitative study.

Science.gov (United States)

Van Gerven, E; Deweer, D; Scott, S D; Panella, M; Euwema, M; Sermeus, W; Vanhaecht, K

2016-07-01

When a patient safety incident (PSI) occurs, not only the patient, but also the involved health professional can suffer. This study focused on this so-called "second victim" of a patient safety incident and aimed to examine: (1) experienced symptoms in the aftermath of a patient safety incident; (2) applied coping strategies; (3) the received versus needed support and (4) the aspects that influenced whether one becomes a second victim. Thirty-one in-depth interviews were performed with physicians, nurses and midwives who have been involved in a patient safety incident. The symptoms were categorized under personal and professional impact. Both problem focused and emotion focused coping strategies were used in the aftermath of a PSI. Problem focused strategies such as performing a root cause analysis and the opportunity to learn from what happened were the most appreciated, but negative emotional responses such as repression and flight were common. Support from colleagues and supervisors who were involved in the same event, peer supporters or professional experts were the most needed. A few individuals described emotional support from the healthcare institution as unwanted. Rendered support was largely dependent on the organizational culture, a stigma remained among healthcare professionals to openly discuss patient safety incidents. Three aspects influenced the extent to which a healthcare professional became a second victim: personal, situational and organizational aspects. These findings indicated that a multifactorial approach including individual and emotional support to second victims is crucial. Copyright © 2016 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

Environmental restoration and decontamination and decommissioning safety documentation

International Nuclear Information System (INIS)

Hansen, J.L.; Frauenholz, L.H.; Kerr, N.R.

1993-01-01

This document presents recommendations of a working group designated by the Environmental Restoration and Remediation (ER) and Decontamination and Decommissioning (D ampersand D) subcommittees of the Westinghouse M ampersand O (Management and Operation) Nuclear Facility Safety Committee. A commonalty of approach to safety documentation specific to ER and D ampersand D activities was developed and is summarized below. Allowance for interpretative tolerance and documentation flexibility appropriate to the activity, graded for hazard category, duration, and complexity, was a primary consideration in development of this guidance

Managing environmental and health impacts of uranium mining

Energy Technology Data Exchange (ETDEWEB)

Vance, R.E.; Cameron, R., E-mail: robert.vance@oecd.org, E-mail: ron.cameron@oecd.org [OECD Nuclear Energy Agency (France)

2014-07-01

As the raw material that fuels nuclear power plants that generate significant amounts of electricity with full life cycle carbon emissions as low as renewable energy sources, uranium is a valuable commodity. Yet uranium mining remains controversial, principally because of environmental and health impacts created when mining was undertaken by governments to meet Cold War strategic requirements. Uranium mining is conducted under significantly different circumstances today. Since the era of military production, societal expectations of environmental protection and the safety of workers and the public have evolved as the outcomes of the early era of mining became apparent, driving changes in regulatory oversight and mining practices. Key aspects of leading practice uranium mining are presented (conventional worker health and safety, worker radiation protection, public health and safety, water quality, tailings and waste rock management) and compared with historic practices to demonstrate the scale of differences. The application of additional aspects of uranium mine life cycle management (public consultation, environmental impact assessment, analysis of socio-economic impacts/benefits, environmental monitoring, financial assurance, product transport, security and safeguards, emergency planning and knowledge transfer), introduced as the industry matured, enhance overall management practices for the long term. Results from several case studies show that improved management of key aspects of uranium mining, combined with the incorporation of new life cycle parameters, have transformed the industry into the most regulated and arguably one of the safest and environmentally responsible types of mining in the world. (author)

Safety aspects of the production of foods and food ingredients from insects.

Science.gov (United States)

Schlüter, Oliver; Rumpold, Birgit; Holzhauser, Thomas; Roth, Angelika; Vogel, Rudi F; Quasigroch, Walter; Vogel, Stephanie; Heinz, Volker; Jäger, Henry; Bandick, Nils; Kulling, Sabine; Knorr, Dietrich; Steinberg, Pablo; Engel, Karl-Heinz

2017-06-01

At present, insects are rarely used by the European food industry, but they are a subject of growing interest as an alternative source of raw materials. The risks associated with the use of insects in the production of foods and food ingredients have not been sufficiently investigated. There is a lack of scientifically based knowledge of insect processing to ensure food safety, especially when these processes are carried out on an industrial scale. This review focuses on the safety aspects that need to be considered regarding the fractionation of insects for the production of foods and food ingredients. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Selected safety aspects of containments for nuclear power plants with WWER-440 reactors

International Nuclear Information System (INIS)

Jankowski, M.W.; Kulig, M.J.; Strupczewski, A.; Balabanov, E.D.

1996-01-01

Considerable attention has been and continues to be focused on the design and operational features that prevent the release of radioactive materials to the environment for a spectrum of accidents for the two classes of WWER-440 reactors: the older 230 model and the more recently designed 213 models. This paper, based on published and unpublished information, aims to clarify the perceptions of the Russian WWER-440 models 230 and 213 nuclear power plant containment system designs and their relevance to selected aspects of accident mitigation. It should be noted that these are unclearly and often negatively perceived, primarily because of a lack of reliable information and a poorly assembled experimental database. Conflicting statements have been made regarding the nature and the features of the plant's containment system. The paper presents a brief outline of the design of both WWER-440 models with respect to their confinement functions. Selected safety-related aspects of the accident localization systems are discussed, and the recognized shortcomings and safety merits are pointed out. The older 230 units experience high leak rates and are designed to withstand medium-size pipe breaks. The possible implications for safety are pointed out in the paper. The on going studies that concentrate on improving the system are highlighted. (orig.)

Experience on environmental qualification of safety-related components for Darlington Nuclear Generating Station

International Nuclear Information System (INIS)

Yu, A.S.; Kukreti, B.M.

1987-01-01

The proliferation of Nuclear Power Plant safety concerns has lead to increasing attention over the Environmental Qualification (EQ) of Nuclear Power Plant Safety-Related Components to provide the assurance that the safety related equipment will meet their intended functions during normal operation and postulated accident conditions. The environmental qualification of these components is also a Licensing requirement for Darlington Nuclear Generating Station. This paper provides an overview of EQ and the experience of a pilot project, in the qualification of the Main Moderator System safety-related functions for the Darlington Nuclear Generating Station currently under construction. It addresses the various phases of qualification from the identification of the EQ Safety-Related Components List, definition of location specific service conditions (normal, adbnormal and accident), safety-related functions, Environmental Qualification Assessments and finally, an EQ system summary report for the Main Moderator System. The results of the pilot project are discussed and the methodology reviewed. The paper concludes that the EQ Program developed for Darlington Nuclear Generating Station, as applied to the qualification of the Main Moderator System, contained all the elements necessary in the qualification of safety-related equipment. The approach taken in the qualification of the Moderator safety-related equipment proves to provide a sound framework for the qualification of other safety-related components in the station

Environmental evaluation Methodology as part, of the project multi-aspect evaluation of the portfolio of ISAGEN options

International Nuclear Information System (INIS)

Ayala R, Ana Victoria

2001-01-01

ISAGEN designed and applied a multi-aspect methodology to classify and compare projects of the company's electricity generation options portfolio. It was developed from a holistic vision, integrating multidisciplinary information from the economic, environmental and technical aspects. This helped to classify the alternatives based on the sum of the values obtained for the different considered aspects. This document presents, in general form, the procedure adopted for the index formulation and selection of factors including the variables corresponding to the sub-aspects (or environmental dimensions) physical, biotic and social. The investigation's work, selection and classification of the variables were developed by an interdisciplinary group of experimented professionals in the environmental evaluation of projects. The integration of the three sub-aspects (physical, biotic and social) resulted in a hierarchy of projects based on environmental considerations, which were finally articulated with the respective values obtained from the technical and economical aspects. In general, the results obtained in each sub-aspect agreed with the hierarchy of projects based on an expert concept previous to the method application. In synthesis, it was observed that this technique is of great utility to make comparisons and general classifications because it allows to take advantage of information with different characteristics and include assumptions or artificial modifiable methodological items that reflect the structure of the deciding agents preferences at any given time

Institutional and environmental aspects of geothermal energy development

Science.gov (United States)

Citron, O. R.

1977-01-01

Until recently, the majority of work in geothermal energy development has been devoted to technical considerations of resource identification and extraction technologies. The increasing interest in exploiting the variety of geothermal resources has prompted an examination of the institutional barriers to their introduction for commercial use. A significant effort was undertaken by the Jet Propulsion Laboratory as a part of a national study to identify existing constraints to geothermal development and possible remedial actions. These aspects included legislative and legal parameters plus environmental, social, and economic considerations.

Environmental aspects of coal trace elements

International Nuclear Information System (INIS)

Swaine, D.J.

1992-01-01

The increasing use of coal, especially for power production, means that more attention is being given to environmental aspects. Some matters, for example, acid mine drainage, acid deposition and the relevance of coal-derived carbon and nitrogen oxides to the greenhouse effect are still being investigated in order to find methods of mitigation. However, much less attention has been given to possible untoward effects from trace elements in coal during mining, preparation and use. Occasional emotional outbursts, based on insufficient evidence, focus attention on arsenic, lead, cadmium, mercury and uranium. The best way to counter such claims is to provide proper information as a basis for more informed judgments. The comments contained in this article are mostly based on work done at the Commonwealth Science and Industrial Research Organization (CSIRO)

Mining challenges to deal with the land, forestry and environmental aspects

International Nuclear Information System (INIS)

Simatupang, M.

1996-01-01

A summary is given of a report of the IMA Business Commission dealing with mining development planning in Indonesia as related to land matters, forestry and environmental aspects. A summary of land matter management of an open pit coal mine is included

Assessment of Health, Safety and Environmental Risks of Zahedan City Gasoline Stations

Directory of Open Access Journals (Sweden)

S. Y. Far

2018-04-01

Full Text Available The purpose of this study was to assess the risk and determine the health, safety and environmental status of fuel stations in Zahedan. In this study, failure mode and effects analysis (FMEA method was used for risk assessment in accordance with the HSE guidelines, national and international standards and laws. In this cross-sectional study, 2 governmental stations and 6 active private stations were evaluated after the necessary coordination with the relevant units. As a result of risk assessment, 27 health risks, 55 safety risks and 22 environmental risks were identified. From among all the identified risks, 67 risks had a Risk Priority Number (RPN of less than 91, 31 risks had an RPN ranging between 91 and 201, and 6 risks had an RPN of over 201. The findings of the study indicated that compliance with the HSE requirements was 51.85%, in the area of health, 47.57% in the area of safety and 27.45% in the environmental area. Overall compliance with the HSE requirements was 42.54%. In order to distribute fuel considering health, reducing risk and increasing compliance with the requirements for safety improvement, health and environmental conditions of fuel supplies are essential.

Selected aspects of environmental protection in Poland

International Nuclear Information System (INIS)

Obarska-Pempkowaik, Hanna; Bolt, Adam

2001-01-01

Environmental deterioration in Poland particularly in 1970's, was a result of an incorrect investment policy and indifferent attitude to the principles of the preservation of nature. Water resources, as part of the environment were affected accordingly. Shortage in water resources is caused by deterioration activity of the industrial, the progressing urban development, overconsumption caused by low prices of water and low status the legislation connected with the natural environment. The European integration processes going on make it necessary to adapt the Polish standards and technological solutions in the sphere of the environmental protection to the standards required by the European Union. The destroyed natural environment cannot secure living at a relatively high standard. Hence the concept of ecological safety based on the conviction that there is no high quality J. life without a high quality of the surrounding environment' has more followers. The main purpose of this paper is to describe the nature and scope of water pollution in Poland with an emphasis on current threats to water quality, with achievements in last decade and background of other European countries. (Original)

Safety of the liquid-metal cooled fast breeder reactor and aspects of its fuel cycle

International Nuclear Information System (INIS)

Kessler, G.; Papp, R.; Huebel, D.

1977-01-01

Design and construction of the sodium-cooled fast reactors KNK-II (20MW(e)) and SNR-300 (300MW(e)) determine the status of safety engineering and safety R and D of LMFBRs in the Federal Republic of Germany. Both prototype fast power reactors have to go through a civil licensing process similar to that applied to present LWRs. A multilevel safety - or defence in depth - approach is applied to the design and construction of fast power reactors. All design data of the fast reactor plant are confirmed by extensive experimental programmes. Design limits of the plant are thoroughly discussed during the licensing process. Important safety R and D programmes have been and are still being performed. A very conservative safety analysis for hypothetical core and other plant accidents is used for present prototype fast reactors. The paper reviews the future trend of development of theoretical methods for accident analysis and the application of experimental results, especially in view of large commercial-type LMFBRs. The safety approach applied to the LMFBR plant is safe operation under normal operating conditions and safe shutdown under off-normal conditions. The consequences of releases of radioactivity to the environment meet the given standards. No chemical reprocessing plant for fast breeder fuel is in operation in the FRG at present; however, R and D work on investigation of all aspects and problem areas of the fast breeder fuel cycle are under way. Systems studies on safety aspects of the fast breeder fuel cycle (transport, reprocessing, fuel fabrication) and its impact on the environment have been performed and the main consequences of these studies are presented in the paper. (author)

Environmental aspects of the transuranics. A selected, annotated bibliography

International Nuclear Information System (INIS)

Martin, F.M.; Faust, R.A.; Sanders, C.T.

1975-07-01

This bibliography of 470 references is from the computer file built to provide information support to the Nevada Applied Ecology Group (NAEG) of ERDA's Nevada Operations Office. The general scope is environmental aspects of uranium and the transuranic elements, with emphasis on plutonium. Biological aspects of the transuranics is highlighted in this bibliography. In addition, supporting materials involving basic ecology studies, ecology of the Nevada Test Site, and reviews on other radionuclides are entered at the request of the NAEG. Significant numeric data is shown in tabular display or is noted for reference to the original document. The references are arranged by subject category with first authors arranged alphabetically within the category. Indexes are given for author, keywords, geographic location, permuted title, taxons, and publication description. (U.S.)

Some aspects of nuclear power plant safety under war conditions

International Nuclear Information System (INIS)

Stritar, A.; Mavko, B.; Susnik, J.; Sarler, B.

1993-01-01

In the summer of 1991, the Krsko nuclear power plant in Slovenia found itself in an area of military operations. This was probably the first commercial nuclear power plant to have been threatened by an attack by fighter jets. A number of never-before-asked questions had to be answered by the operating staff and supporting organizations. Some aspects of nuclear power plant safety under war conditions are described, such as the selection of the best plant operating state before the attack and the determination of plant system vulnerability and dose releases from the potentially damaged spent fuel in the spent-fuel pit. The best operating mode to which the plant should be brought before the attack is cold shutdown, and radiological consequences to the environment after the spent fuel is damaged and the water in the pit is lost are not very high. The problem of nuclear power plant safety under war conditions should be addressed in more detail in the future

Linking Environmental Sustainability, Health, and Safety Data in Health Care: A Research Roadmap.

Science.gov (United States)

Kaplan, Susan B; Forst, Linda

2017-08-01

Limited but growing evidence demonstrates that environmental sustainability in the health-care sector can improve worker and patient health and safety. Yet these connections are not appreciated or understood by decision makers in health-care organizations or oversight agencies. Several studies demonstrate improvements in quality of care, staff satisfaction, and work productivity related to environmental improvements in the health-care sector. A pilot study conducted by the authors found that already-collected data could be used to evaluate impacts of environmental sustainability initiatives on worker and patient health and safety, yet few hospitals do so. Future research should include a policy analysis of laws that could drive efforts to integrate these areas, elucidation of organizational models that promote sharing of environmental and health and safety data, and development of tools and methods to enable systematic linkage and evaluation of these data to expand the evidence base and improve the hospital environment.

Exploring the role of emotional intelligence in behavior-based safety coaching.

Science.gov (United States)

Wiegand, Douglas M

2007-01-01

Safety coaching is an applied behavior analysis technique that involves interpersonal interaction to understand and manipulate environmental conditions that are directing (i.e., antecedent to) and motivating (i.e., consequences of) safety-related behavior. A safety coach must be skilled in interacting with others so as to understand their perspectives, communicate a point clearly, and be persuasive with behavior-based feedback. This article discusses the evidence-based "ability model" of emotional intelligence and its relevance to the interpersonal aspect of the safety coaching process. Emotional intelligence has potential for improving safety-related efforts and other aspects of individuals' work and personal lives. Safety researchers and practitioners are therefore encouraged to gain an understanding of emotional intelligence and conduct and support research applying this construct toward injury prevention.

Endometrial ablation by rollerball electrocoagulation compared to uterine balloon thermal ablation. Technical and safety aspects.

NARCIS (Netherlands)

Zon-Rabelink, I.A.A. van; Vleugels, M.P.; Merkus, J.M.W.M.; Graaf, R.M. de

2003-01-01

OBJECTIVE: To compare two methods of endometrial ablation, hysteroscopic rollerball electrocoagulation (RBE) and non-hysteroscopic uterine balloon thermal (UBT) ablation (Thermachoice), regarding intra- and post-operative technical complications and safety aspects. STUDY DESIGN: A randomised

Environmental testing of an experimental digital safety channel

International Nuclear Information System (INIS)

Korsah, K.; Tanaka, T.J.; Wilson, T.L. Jr.; Wood, R.T.

1996-09-01

This document presents the results of environmental stress tests performed on an experimental digital safety channel (EDSC) assembled at the Oak Ridge National Laboratory (ORNL) as part of the NRC-sponsored Qualification of Advanced Instrumentation and Controls (W) System program. The objective of this study is to investigate failure modes and vulnerabilities of microprocessor-based technologies when subjected to environmental stressors. The study contributes to the technical basis for environmental qualification of safety-related digital I ampersand C systems. The EDSC employs technologies and digital subsystems representative of those proposed for use in advanced light-water reactors (ALWRs) or for retrofits in existing plants. Subsystems include computers, electrical and optical serial communication links, fiber-optic network links, analog-to-digital and digital-to-analog converters, and multiplexers. The EDSC was subjected to selected stressors that are a potential risk to digital equipment in a mild environment. The selected stressors were electromagnetic and radio-frequency interference (EMYRFI), temperature, humidity, and smoke exposure. The stressors were applied over ranges that were considerably higher than what the channel is likely to experience in a normal nuclear power plant environment. Ranges of stress were selected at a sufficiently high level to induce errors so that failure modes that are characteristic of the technologies employed could be identified

Environmental aspects of the transuranics. A selected, annotated bibliography. Volume 9

International Nuclear Information System (INIS)

Ensminger, J.T.; Fore, C.S.; Dailey, N.S.

1978-09-01

This ninth published bibliography of 589 references is compiled from the Nevada Applied Ecology Information Center's Data Base on the Environmental Aspects of the Transuranics. The data base was built to provide information support to the Nevada Applied Ecology Group (NAEG) of DOE's Nevada Operations Office. The general scope covers environmental aspects of uranium and the transuranic elements, with emphasis on plutonium. This annotated bibliography highlights literature on plutonium 238 and 239 and americium 241 in the critical organs of man and animals. Studies on the migration of plutonium and the transplutonics through the environment are also emphasized. Supporting information on ecology of the Nevada Test Site and reviews and summarizing literature on other radionuclides have been included at the request of the NAEG. The references are arranged by subject category with leading authors appearing alphabetically within each category. Indexes are provided for author(s), geographic location, keywords, taxonomic name, title, and publication description

Environmental juridical aspects of the mining legislation in Colombia

International Nuclear Information System (INIS)

Rojas Florez, Maria Teresa

2004-01-01

From the international context at the regional level, the mining activity in Colombia is subject to the execution of norms of environmental character or environmental miner that define it in some way. This norma has suffered important transformations determined by the fundamental juridical changes that especially in the last ten years they have been given so much in the environmental sector as the mining sector, as well as for the jurisprudence especially of the constitutional court on these matters. These aspects were in their majority, analyzed in a combined way for the mining and environmental authorities, in the juridical forum of the environmental national system in that the proposal of the CDMB, Corantioquia and Corpouraba, it approaches this like discussion topic, likewise the technical documents that supported the expedition of the environmental guides miner, were fed by the combined work of mining and environmental authorities. These confluence points should be fundamentally disclosed and well-known inside the mining sector as of the environmental sector in order to that, not only has clear which is at the moment the environmental mining norma effective, but rather it is also had the necessary tools to give to this normative, the interpretation and appropriate application. The different implications that it introduced the law 685 of 2001 in environmental matter, will be analyzed by the light of the jurisprudence and the new norms settled down in environmental matter, such as the Sentences C-431 2000, C-336 2000, C-339 2002 and the Ordinances 2390 of 2002, 2653 of 2003, 1180 of 2003, among other, especially in connection with topics as the contents in the Chapter III of the Law 685 of 2001 reserved, excluded and restricted areas, the topic of the environmental licenses and that of the legalization of the mining in fact, making a priori in this analysis an evaluation from the point of view of the environmental authority in connection with the efficiency and

Hazard Identification and Risk Assessment in Water Treatment Plant considering Environmental Health and Safety Practice

Directory of Open Access Journals (Sweden)

Falakh Fajrul

2018-01-01

Full Text Available Water Treatment Plant (WTP is an important infrastructure to ensure human health and the environment. In its development, aspects of environmental safety and health are of concern. This paper case study was conducted at the Water Treatment Plant Company in Semarang, Central Java, Indonesia. Hazard identification and risk assessment is one part of the occupational safety and health program at the risk management stage. The purpose of this study was to identify potential hazards using hazard identification methods and risk assessment methods. Risk assessment is done using criteria of severity and probability of accident. The results obtained from this risk assessment are 22 potential hazards present in the water purification process. Extreme categories that exist in the risk assessment are leakage of chlorine and industrial fires. Chlorine and fire leakage gets the highest value because its impact threatens many things, such as industrial disasters that could endanger human life and the environment. Control measures undertaken to avoid potential hazards are to apply the use of personal protective equipment, but management will also be better managed in accordance with hazard control hazards, occupational safety and health programs such as issuing work permits, emergency response training is required, Very useful in overcoming potential hazards that have been determined.

Hazard Identification and Risk Assessment in Water Treatment Plant considering Environmental Health and Safety Practice

Science.gov (United States)

Falakh, Fajrul; Setiani, Onny

2018-02-01

Water Treatment Plant (WTP) is an important infrastructure to ensure human health and the environment. In its development, aspects of environmental safety and health are of concern. This paper case study was conducted at the Water Treatment Plant Company in Semarang, Central Java, Indonesia. Hazard identification and risk assessment is one part of the occupational safety and health program at the risk management stage. The purpose of this study was to identify potential hazards using hazard identification methods and risk assessment methods. Risk assessment is done using criteria of severity and probability of accident. The results obtained from this risk assessment are 22 potential hazards present in the water purification process. Extreme categories that exist in the risk assessment are leakage of chlorine and industrial fires. Chlorine and fire leakage gets the highest value because its impact threatens many things, such as industrial disasters that could endanger human life and the environment. Control measures undertaken to avoid potential hazards are to apply the use of personal protective equipment, but management will also be better managed in accordance with hazard control hazards, occupational safety and health programs such as issuing work permits, emergency response training is required, Very useful in overcoming potential hazards that have been determined.

Identifying environmental safety and health requirements for the Fernald Environmental Restoration Management Corporation

International Nuclear Information System (INIS)

Beckman, W.H.; Cossel, S.C.; Alhadeff, N.; Lindamood, S.B.; Beers, J.A.

1994-01-01

This presentation will describe the Fernald Environmental Restoration Management Corporation's (FERMCO) Standards/Requirements Identification Documents (S/RlDs) Program, the unique process used to implement it, and the status of the program. We will also discuss the lessons learned as the program was implemented. The Department of Energy (DOE) established the Fernald site to produce uranium metals for the nation's defense programs in 1953. In 1989, DOE suspended production and, in 1991, the mission of the site was formally changed to one of environmental cleanup and restoration. The site was renamed the Fernald Environmental Management Project (FEMP). FERMCO's mission is to provide safe, early, and least-cost final clean-up of the site in compliance with all regulations and commitments. DOE has managed nuclear facilities primarily through its oversight of Management and Operating contractors. Comprehensive nuclear industry standards were absent when most DOE sites were first established, Management and Operating contractors had to apply existing non-nuclear industry standards and, in many cases, formulate new technical standards. Because it was satisfied with the operation of its facilities, DOE did not incorporate modern practices and standards as they became available. In March 1990, the Defense Nuclear Facilities Safety Board issued Recommendation 90-2, which called for DOE to identify relevant standards and requirements, conduct adequacy assessments of requirements in protecting environmental, public, and worker health and safety, and determine the extent to which the requirements are being implemented. The Environmental Restoration and Waste Management Office of DOE embraced the recommendation for facilities under its control. Strict accountability requirements made it essential that FERMCO and DOE clearly identify applicable requirements necessary, determine the requirements' adequacy, and assess FERMCO's level of compliance

Safety aspects of Particle Bed Reactor plutonium burner system

International Nuclear Information System (INIS)

Powell, J.R.; Ludewig, H.; Todosow, M.

1993-01-01

An assessment is made of the safety aspects peculiar to using the Particle Bed Reactor (PBR) as the burner in a plutonium disposal system. It is found that a combination of the graphitic fuel, high power density possible with the PBR and engineered design features results in an attractive concept. The high power density potentially makes it possible to complete the plutonium burning without requiring reprocessing and remanufacturing fuel. This possibility removes two hazardous steps from a plutonium burning complex. Finally, two backup cooling systems depending on thermo-electric converters and heat pipes act as ultimate heat removal sinks in the event of accident scenarios which result in loss of fuel cooling

Safety aspects and operating experience of LWR plants in Japan

International Nuclear Information System (INIS)

Aoki, S.; Hinoki, M.

1977-01-01

From the outset of nuclear power development in Japan, major emphasis has been placed on the safety of the nuclear power plants. There are now twelve nuclear power plants in operation with a total output of 6600 MWe. Their operating records were generally satisfactory, but in the 1974 to 1975 period, they experienced somewhat declined availability due to the repair work under the specific circumstances. After investigation of causes of troubles and the countermeasures thereof were made to ensure safety, they are now keeping good performance. In Japan, nuclear power plants are strictly subject to sufficient and careful inspection in compliance with the safety regulation, and are placed under stringent radiation control of employees. Under the various circumstances, however, the period of annual inspection tends to be prolonged more than originally planned, and this consequently is considered to be one of the causes of reduced availability. In order to develop nuclear power generation for the future, it is necessary to put further emphasis on the assurance of safety and to endeavor to devise measures to improve availability of the plants, based on the careful analysis of causes which reduce plant availability. This paper discusses the results of studies made for the following items from such viewpoints: (1) Safety and Operating Experience of LWR Nuclear Power Plants in Japan; a) Operating experience with light water reactors b) Improvements in design of light water reactors during the past ten years c) Analysis of the factors which affect plant availability; 2) Assurance of Safety and Measures to Increase Availability a) Measures for safety and environmental protection b) Measures to reduce radiation exposure of employees c) Appropriateness of maintenance and inspection work d) Measures to increase plant availability e) Measures to improve reliability of equipments and components; and 3) Future Technical Problems

A study on the environmental aspects of hydrogen pathways in Korea

International Nuclear Information System (INIS)

Lee, Ji-Yong; Yu, Moo-Sang; Cha, Kyoung-Hoon; Lee, Soo-Yeon; Hur, Tak; Lim, Tae Won

2009-01-01

In this study, the environmental aspects of H 2 pathways are analyzed according to plausible H 2 production methods, production capacity, and distribution options in Korea, using life cycle assessment (LCA) methodology. The target H 2 pathways analyzed are H 2 via naphtha steam reforming (Naphtha SR), H 2 via natural gas steam reforming (NG SR), H 2 via liquefied petroleum gas steam reforming (LPG SR), H 2 via water electrolysis with wind power (WE[Wind]), and H 2 via water electrolysis with Korea electricity mix (WE[KEM]). The results are then compared with those of conventional fuels (gasoline, diesel, and LPG) to identify which H 2 pathway has less environmental impact than the conventional fuels. Global warming (GW) impact, fossil fuel consumption (FFC) and regulated air emissions are studied to examine the environmental aspects of each fuel pathway. Given that H 2 technologies and infrastructures have yet to be fully commercialized, the environmental aspects of each pathway are analyzed in both their present status and a future scenario in 2015. LCA results show that WE[Wind] is superior regarding global warming potential (GWP), FFC and regulated air emissions. When gasoline is replaced with H 2 from WE[Wind], 99.8% and 99.9% of GWP and FFC can be reduced, respectively. Among the H 2 pathways based on fossil fuels, Naphtha SR[C] has the lowest values of GWP since the CO 2 capture equipment is attached to it. On the other hand, Naphtha SR[S] which is the station-type H 2 pathway does not have the CO 2 capture equipment. Naphtha SR[C] can reduce CO 2 emissions by 23.60 tons compared to gasoline over the entire life cycle of a vehicle. At present, Naphtha SR[C] appears to be environmentally efficient as H 2 conversion and infrastructure technologies have already been commercialized and are suitably developed in Korea. In 2015, however, among the H 2 pathways based on fossil fuels LPG SR[S] is expected to be the best pathway in terms of FFC and regulated air

Agronomic, Energetic and Environmental Aspects of Biomass Energy Crops Suitable for Italian Environments

Directory of Open Access Journals (Sweden)

Salvatore L. Cosentino

2008-06-01

Full Text Available The review, after a short introduction on the tendencies of the European Community Policy on biomasses, describes the agronomic, energy potential and environmental aspects of biomass crops for energy in relation to the research activity carried out in Italy on this topic, differentiating crops on the basis of the main energy use: biodiesel and bioethanol (which refers to “first generation biofuel”, heat and electricity. Currently, many of the crops for potential energy purposes are food crops (wheat, barley, corn, rapeseed, soybean, sunflower, grain sorghum, sugar beet and their production may be used as biofuel source (bioethanol and biodiesel since their crop management aspects are well known and consequently they are immediately applicable. Other species that could be used, highly productive in biomass, such as herbaceous perennial crops (Arundo donax, Miscanthus spp., cardoon, annual crops (sweet sorghum, short rotation woody crops (SRF have been carefully considered in Italy, but they still exhibit critical aspects related to propagation technique, low-input response, harvest and storage technique, cultivars and mechanization. Crops for food, however, often have negative energetic indices and environmental impacts (carbon sequestration, Life Cycle Assessment, consequent to their low productivity. Conversely, crops which are more productive in biomass, show both a more favourable energy balance and environmental impact.

Agronomic, Energetic and Environmental Aspects of Biomass Energy Crops Suitable for Italian Environments

Directory of Open Access Journals (Sweden)

Giuseppina M. D’Agosta

2011-02-01

Full Text Available The review, after a short introduction on the tendencies of the European Community Policy on biomasses, describes the agronomic, energy potential and environmental aspects of biomass crops for energy in relation to the research activity carried out in Italy on this topic, differentiating crops on the basis of the main energy use: biodiesel and bioethanol (which refers to “first generation biofuel”, heat and electricity. Currently, many of the crops for potential energy purposes are food crops (wheat, barley, corn, rapeseed, soybean, sunflower, grain sorghum, sugar beet and their production may be used as biofuel source (bioethanol and biodiesel since their crop management aspects are well known and consequently they are immediately applicable. Other species that could be used, highly productive in biomass, such as herbaceous perennial crops (Arundo donax, Miscanthus spp., cardoon, annual crops (sweet sorghum, short rotation woody crops (SRF have been carefully considered in Italy, but they still exhibit critical aspects related to propagation technique, low-input response, harvest and storage technique, cultivars and mechanization. Crops for food, however, often have negative energetic indices and environmental impacts (carbon sequestration, Life Cycle Assessment, consequent to their low productivity. Conversely, crops which are more productive in biomass, show both a more favourable energy balance and environmental impact.

Traffic safety and environmental impacts. Synergies and conflicts; Liikenteen turvallisuuden ja ympaeristoevaikutusten synergiat ja vastakkainasettelut

Energy Technology Data Exchange (ETDEWEB)

Pollanen, M.; Ahlroth, J.; Aalto, E.; Liimatainen, H. [Tampere Univ. of Technology (Finland). Transport Research Centre Verne

2013-06-01

The improvement of safety and mitigation of harmful environmental effects are two key goals in developing sustainable transport. In part, the same measures can improve safety and mitigate environmental impacts. On the other hand, measures for improving safety may aggravate harmful environmental effects, and vice versa. The objective of this study is to describe the synergies and conflicts related to the objectives of improving the safety and mitigating the environmental impacts of transport and, in particular, the measures taken in pursuit of these objectives. The study conducted as a literature review complemented with expert interviews and workshops. The study focused on examining measures that could be implemented in Finland. Measures at transport system level for influencing traffic volumes and the use of different means of passenger and goods transport, as well as safety and environmental measures in road, rail, water and air traffic, were the subject of separate investigation. More than 200 measures for influencing the safety and environmental impacts of transport were reviewed in the study. A large portion of these measures only have a significant effect on one or the other of these subjects of study: the impact of safety measures is primarily directed at safety, while environmental measures mainly affect the environment. The core synergies between transport and the environment relate to vehicle mileage, since a reduced mileage translates to improved safety and reduced environmental impacts, such as lower energy consumption and fewer emissions. On the transport system level, output can be influenced by measures such as promoting remote work, alleviating the need for travel by using electronic services, and increasing the utilization of capacity in goods transport. The choice of transport mode has a large impact on safety, since different modes of transport entail significantly different risks and environmental impacts. Increasing the attractiveness of public

Nulcear Safety: Technical progress review, October--December 1988

Energy Technology Data Exchange (ETDEWEB)

Silver, E G [ed.

1988-01-01

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

Quantitative aspects of transuranic and other radionuclide field studies

International Nuclear Information System (INIS)

Gilbert, R.O.

1982-01-01

The purpose of this project is to identify, develop, and communicate statistical methodology for environmental actinide studies. Significant accomplishments for FY 1981 included continued publication of TRAN-STAT (a periodical specializing in the statistical aspects of environmental contaminant studies), continued work on our computer simulation study for evaluating ratios, and review of statistical methodology applicable to environmental radionuclides. Related work for the DOE Division Office of Operational Safety included writing the statistical portion of a decommissioning and decontamination guide, expanding our expertise in Kriging and other spatial pattern statistical methodology applicable to the evaluation of potential environmental hazards, continuing statistical support for the Nevada Applied Ecology Group (NAEG), and providing statistical assistance to PNL's environmental radiological monitoring effort

Risks and safety aspects related to PET/MR examinations

International Nuclear Information System (INIS)

Brix, Gunnar; Nekolla, Elke A.; Nosske, Dietmar; Griebel, Juergen

2009-01-01

The introduction of positron emission tomography (PET)/magnetic resonance (MR) systems into medical practice in the foreseeable future may not only lead to a gain in clinical diagnosis compared to PET/computed tomography (CT) imaging due to the superior soft-tissue contrast of the MR technology but can also substantially reduce exposure of patients to ionizing radiation. On the other hand, there are also risks and health effects associated with the use of diagnostic MR devices that have to be considered carefully. This review article summarizes biophysical and biological aspects, which are of relevance for the assessment of health effects related to the exposure of patients to both ionizing radiation in PET and magnetic and electromagnetic fields in MR. On this basis, some considerations concerning the justification and optimization of PET/MR examinations are presented - as far as this is possible at this very early stage. Current safety standards do not take into account synergistic effects of ionizing radiation and magnetic and electromagnetic fields. In the light of the developing PET/MR technology, there is an urgent need to investigate this aspect in more detail for exposure levels that will occur at PET/MR systems. (orig.)

Code of Sustainable Practice in Occupational and Environmental Health and Safety for Corporations.

Science.gov (United States)

Castleman, Barry; Allen, Barbara; Barca, Stefania; Bohme, Susanna Rankin; Henry, Emmanuel; Kaur, Amarjit; Massard-Guilbaud, Genvieve; Melling, Joseph; Menendez-Navarro, Alfredo; Renfrew, Daniel; Santiago, Myrna; Sellers, Christopher; Tweedale, Geoffrey; Zalik, Anna; Zavestoski, Stephen

2008-01-01

At a conference held at Stony Brook University in December 2007, "Dangerous Trade: Histories of Industrial Hazard across a Globalizing World," participants endorsed a Code of Sustainable Practice in Occupational and Environmental Health and Safety for Corporations. The Code outlines practices that would ensure corporations enact the highest health and environmentally protective measures in all the locations in which they operate. Corporations should observe international guidelines on occupational exposure to air contaminants, plant safety, air and water pollutant releases, hazardous waste disposal practices, remediation of polluted sites, public disclosure of toxic releases, product hazard labeling, sale of products for specific uses, storage and transport of toxic intermediates and products, corporate safety and health auditing, and corporate environmental auditing. Protective measures in all locations should be consonant with the most protective measures applied anywhere in the world, and should apply to the corporations' subsidiaries, contractors, suppliers, distributors, and licensees of technology. Key words: corporations, sustainability, environmental protection, occupational health, code of practice.

Safety aspects of preoperative high-dose glucocorticoid in primary total knee replacement

DEFF Research Database (Denmark)

Jørgensen, C C; Pitter, F T; Kehlet, H

2017-01-01

Background: Preoperative single high-dose glucocorticoid may have early outcome benefits in total hip arthroplasty (THA) and knee arthroplasty (TKA), but long-term safety aspects have not been evaluated. Methods: From October 2013, the departments reporting to the prospective Lundbeck Foundation....... Conclusions: In this detailed prospective cohort study, preoperative high-dose glucocorticoid administration was not associated with LOS >4 days, readmissions or infectious complications in TKA patients without contraindications....

An Analytic Network Process approach for the environmental aspect selection problem — A case study for a hand blender

Energy Technology Data Exchange (ETDEWEB)

Bereketli Zafeirakopoulos, Ilke, E-mail: ibereketli@gsu.edu.tr; Erol Genevois, Mujde, E-mail: merol@gsu.edu.tr

2015-09-15

Life Cycle Assessment is a tool to assess, in a systematic way, the environmental aspects and its potential environmental impacts and resources used throughout a product's life cycle. It is widely accepted and considered as one of the most powerful tools to support decision-making processes used in ecodesign and sustainable production in order to learn about the most problematic parts and life cycle phases of a product and to have a projection for future improvements. However, since Life Cycle Assessment is a cost and time intensive method, companies do not intend to carry out a full version of it, except for large corporate ones. Especially for small and medium sized enterprises, which do not have enough budget for and knowledge on sustainable production and ecodesign approaches, focusing only on the most important possible environmental aspect is unavoidable. In this direction, finding the right environmental aspect to work on is crucial for the companies. In this study, a multi-criteria decision-making methodology, Analytic Network Process is proposed to select the most relevant environmental aspect. The proposed methodology aims at providing a simplified environmental assessment to producers. It is applied for a hand blender, which is a member of the Electrical and Electronic Equipment family. The decision criteria for the environmental aspects and relations of dependence are defined. The evaluation is made by the Analytic Network Process in order to create a realistic approach to inter-dependencies among the criteria. The results are computed via the Super Decisions software. Finally, it is observed that the procedure is completed in less time, with less data, with less cost and in a less subjective way than conventional approaches. - Highlights: • We present a simplified environmental assessment methodology to support LCA. • ANP is proposed to select the most relevant environmental aspect. • ANP deals well with the interdependencies between aspects

An Analytic Network Process approach for the environmental aspect selection problem — A case study for a hand blender

International Nuclear Information System (INIS)

Bereketli Zafeirakopoulos, Ilke; Erol Genevois, Mujde

2015-01-01

Life Cycle Assessment is a tool to assess, in a systematic way, the environmental aspects and its potential environmental impacts and resources used throughout a product's life cycle. It is widely accepted and considered as one of the most powerful tools to support decision-making processes used in ecodesign and sustainable production in order to learn about the most problematic parts and life cycle phases of a product and to have a projection for future improvements. However, since Life Cycle Assessment is a cost and time intensive method, companies do not intend to carry out a full version of it, except for large corporate ones. Especially for small and medium sized enterprises, which do not have enough budget for and knowledge on sustainable production and ecodesign approaches, focusing only on the most important possible environmental aspect is unavoidable. In this direction, finding the right environmental aspect to work on is crucial for the companies. In this study, a multi-criteria decision-making methodology, Analytic Network Process is proposed to select the most relevant environmental aspect. The proposed methodology aims at providing a simplified environmental assessment to producers. It is applied for a hand blender, which is a member of the Electrical and Electronic Equipment family. The decision criteria for the environmental aspects and relations of dependence are defined. The evaluation is made by the Analytic Network Process in order to create a realistic approach to inter-dependencies among the criteria. The results are computed via the Super Decisions software. Finally, it is observed that the procedure is completed in less time, with less data, with less cost and in a less subjective way than conventional approaches. - Highlights: • We present a simplified environmental assessment methodology to support LCA. • ANP is proposed to select the most relevant environmental aspect. • ANP deals well with the interdependencies between aspects

Operational and safety aspects of vitrified waste casks

International Nuclear Information System (INIS)

Kirchner, B.

1993-01-01

For the time being two technical solutions have been developed for the interim storage: 1) one is based on forced air cooled pits set out in a concrete structure, as presently provided close to the Vitrification Facilities on reprocessing sites; 2) the other one is based on transportable storage casks standing vertically onto a storage pad, following principles similar to those already experienced with spent fuel storage casks. Considering these two solutions for interim storage, TRANSNUCLEAIRE has developed two main types of transportable casks for vitrified HAW; one is a routine transport cask; the other one is a transportable storage cask. Both are covered by the generic name TN28V and have already been described in previous papers. This paper deals with the safety and operation aspects of the casks under both transport and storage conditions. (J.P.N.)

Investigations of safety risks in converted electric vehicles

NARCIS (Netherlands)

Bolech, M.; Foster, D.L.; Lange, R. de; Rodarius, C.

2010-01-01

Within the departments Environmentally Sustainable Transport and Automotive of TNO (Netherlands organisation for applied scientific research) several projects investigating safety aspects of electric vehicles have been conducted, including one in cooperation with KEMA and RDW of the Netherlands.

Environmental Regulation and Food Safety: Studies of Protection ...

International Development Research Centre (IDRC) Digital Library (Canada)

1 janv. 2006 ... Environmental Regulation and Food Safety intéressera les artisans des politiques et les ONG , les chercheurs et les spécialistes de l'économie ... This funding will help strengthen the Science, Technology and Innovation Policy Research Organization's (STIPRO) role as a credible public policy institution in ...

Quality and environmental aspects in relation to the application of pulverized fuel ash

International Nuclear Information System (INIS)

Berg, J.W. van den

1991-01-01

In the Netherlands pulverised coal from different parts of the world is used in 5 coalfired power stations which each have 1 to 3 boilers, which in turn are equipped with various types of burners. This causes a large variation in the composition of the pulverized fuel ash (PFA). The PFA is marketed in several areas, each of which has its own specific quality requirements. These requirements are partially dictated in standard specifications. In order to obtain insight into the quality of the PFA, samples are taken and analysed daily. Rules for certification, concerning the quality and the quality control of PFA for use in concrete in The Netherlands have been agreed upon. The environmental aspects in relation to the application of PFA concern the working conditions and health aspects during processing and the environmental impact when PFA is used as a building material. The Dutch legislation concerning the environmental consequences of the application of PFA and other secondary materials is currently under review. 3 tabs

Radiation safety assessment and development of environmental radiation monitoring technology

CERN Document Server

Choi, B H; Kim, S G

2002-01-01

The Periodic Safety Review(PSR) of the existing nuclear power plants is required every ten years according to the recently revised atomic energy acts. The PSR of Kori unit 1 and Wolsong unit 1 that have been operating more than ten years is ongoing to comply the regulations. This research project started to develop the techniques necessary for the PSR. The project developed the following four techniques at the first stage for the environmental assessment of the existing plants. 1) Establishment of the assessment technology for contamination and accumulation trends of radionuclides, 2) alarm point setting of environmental radiation monitoring system, 3) Development of Radiation Safety Evaluation Factor for Korean NPP, and 4) the evaluation of radiation monitoring system performance and set-up of alarm/warn set point. A dynamic compartment model to derive a relationship between the release rates of gas phase radionuclides and the concentrations in the environmental samples. The model was validated by comparing ...

Environmental and economical aspects of selected energy system

International Nuclear Information System (INIS)

1991-11-01

An analysis of environmental and economical aspects of selected renewable energy systems is presented. The aim was to provide a basis for estimating the competitive status in each case, to review the consequences of technological development, to identify attractive markets and to evaluate the effects of various economic conditions. Calculation methods are described and individual solar heating systems are compared to oil-fired boilers, boilers fired with solid fuels are compared to oil-fired boilers and straw-fired cogeneration plants are compared with coal, fuel-oil and straw-fired district heating plants. Results are presented in the form of tables and graphs. (AB)

India's power program and its concern over environmental safety

International Nuclear Information System (INIS)

Prasad, G.E.; Mittra, J.

2001-01-01

India's need of electrical power is enormous and per capita consumption of power is to be increased at least by ten times to reach the level of world average. Thermal Power generation faces two fold problems. First, there is scarcity of good quality fuel and second, increasing environmental pollution. India's self reliant, three stage, 'closed-fuel-cycle' nuclear power program is promising better solution to the above problems. To ensure Radiation Protection and Safety of Radiation Sources, Indian Nuclear Power program emphasizes upon design and engineering safety by incorporating necessary safety features in the design, operational safety through structured training program and typically through software packages to handle rare unsafe events and regulation by complying safety directives. A health survey among the radiation workers indicates that there is no extra threat to the public from nuclear power program. Based on latest technology, as available in case of nuclear power option, it is quite possible to meet high energy requirement with least impact on the environment.. (authors)

Supply chain management - safety aspects

Directory of Open Access Journals (Sweden)

2010-12-01

Full Text Available Developing economy, growing customer requirements and competition make the service level higher. Delivery safety - as the highest priority - has to be maintained at the same time. Customers more and more often require transport to be very flexible, fast, and complex in terms of carrying every quantity of goods of different sizes, from and to different countries, through customs clearance, storing and distribution of shipments. Meeting these requirements depends on complex information on transport processes and their safety. The article presents safety foundations and institution Authorized Economic Operator - AEO in supply chains.

Symposium proceedings: environmental aspects of fuel conversion technology, II, December 1975, Hollywood, Florida. [34 papers

Energy Technology Data Exchange (ETDEWEB)

Ayer, F.A. (comp.)

1976-06-01

The report covers EPA's second symposium on the environmental aspects of fuel conversion technology. Its main objective was to review and discuss environmentally related information in the field of fuel conversion technology. Specific topics were environmental problem definition, process technology, control technology, and process measurements. Thirty-four papers were abstracted and indexed separately.

Safety aspects in radiology

International Nuclear Information System (INIS)

Silva, D.C. da.

1991-05-01

The development of a program for the evaluation of the physical installations and operational procedures in diagnostic radiology with respect to radiation-safety is described. In addition, a proposal for the quality analysis of X-ray equipment and film-processing is presented. The purpose is both to ensure quality and safety of the radiology service, as well as to aid in the initial and in-service training of the staff. Interviews with patients, staff practicing radiology at a wide range of levels and the controlling authorities were carried out in the State of Rio de Janeiro in order to investigate the existence and the effective use of personal radioprotection equipment as well as user's and staff's concern for radiation safety. Additionally physical measurements were carried out in University Hospitals in Rio de Janeiro to assess the quality of equipment in day-to-day use. It was found that in the locations which did not have routine maintenance the equipment was generally in a poor state which lead to a high incidence of repetition of examinations and the consequent financial loss. (author)

Safety aspects of NPP ageing

International Nuclear Information System (INIS)

1995-01-01

Preparation of safety practices on assessment and management of aging of major NPP components important to safety, CRP on management of aging of concrete containment buildings, CRP on management of aging of in-containment instrumentation and control cables are outlined

Health-safety and environmental risk assessment of power plants using multi criteria decision making method

Directory of Open Access Journals (Sweden)

Jozi Ali Seyed

2011-01-01

Full Text Available Growing importance of environmental issues at global and regional levels including pollution of water, air etc. as well as the outcomes such as global warming and climate change has led to being considered environmental aspects as effective factors for power generation. Study ahead, aims at examination of risks resulting from activities of Yazd Combined Cycle Power Plant located in Iran. Method applied in the research is analytical hierarchy process. After identification of factors causing risk, the analytical hierarchy structure of the power plant risks were designed and weight of the criteria and sub-criteria were calculated by intensity probability product using Eigenvector Method and EXPERT CHOICE Software as well. Results indicate that in technological, health-safety, biophysical and socio economic sections of the power plant, factors influenced by the power plant activities like fire and explosion, hearing loss, quantity of groundwater, power generation are among the most important factors causing risk in the power plant. The drop in underground water levels is the most important natural consequence influenced on Yazd Combined Cycle Power Plant.

Impacts of nuclear and hydroelectric great projects: economical, technological, environmental and social aspects

International Nuclear Information System (INIS)

Rosa, L.P.; Sigaud, L.; Mielnik, O.

1988-01-01

Some studies about the Great Impacts of Energy Sources, mainly nuclear power plant and hydroelectric power plant, in Brazil are presented. The technological, economical, social and environmental aspects are described [pt

Environmental licensing of nuclear facilities: compatibility of technical competencies

International Nuclear Information System (INIS)

Shu, J.; Paiva, R.L.C. de; Mezrahi, A.; Cardoso, E.M.; Aquino, W.P.; Deppe, A.L.; Menezes, R.M.; Prado, V.; Franco, N.M.F.L.; Nouailhetas, Y.; Xavier, A.M.

1996-01-01

The Brazilian Nuclear Energy Commission (CNEN) has the technical competency for diagnosing environmental radiological impacts, as well as evaluating the safety and requiring adequate control of the facilities which, due to their activities, represent a potential risk of radiological contamination for the environment. The institution is responsible for emission of radioprotection guidelines, controls and surveys in nuclear safety according to the country's regulations and international recommendations. The methodology to assure the limitation of radiation exposure is consequence from shared control over the nuclear activities, in special the nuclear facilities. According to the Federal Constitution of 1988, the nuclear activities must be under exclusive control of the Union in special related to the nuclear policies, economical, laboral and nuclear safety aspects, while the health and environmental controls of these activities are shared by the Federation, Union, States, Federal District and Counties. The controls related to specific aspects have to be harmonized in such a way to be optimized and effective. In this paper the results of compatibilization of nuclear legislation and environmental legislation are presented aiming to optimize the licensing of nuclear facilities. (author)

Regulatory aspects of NPP safety

International Nuclear Information System (INIS)

Kastchiev, G.

1999-01-01

Extensive review of the NPP Safety is presented including tasks of Ministry of Health, Ministry of Internal Affairs, Ministry of Environment and Waters, Ministry of Defense in the field of national system for monitoring the nuclear power. In the frame of national nuclear safety legislation Bulgaria is in the process of approximation of the national legislation to that of EC. Detailed analysis of the status of regulatory body, its functions, organisation structure, responsibilities and future tasks is included. Basis for establishing the system of regulatory inspections and safety enforcement as well as intensification of inspections is described. Assessment of safety modifications is concerned with complex program for reconstruction of Units 1-4 of Kozloduy NPP, as well as for modernisation of Units 5 and 6. Qualification and licensing of the NPP personnel, Year 2000 problem, priorities and the need of international assistance are mentioned

78 FR 55230 - Safety and Environmental Management System Requirements for Vessels on the U.S. Outer Continental...

Science.gov (United States)

2013-09-10

...\\ including the regulation of workplace safety and health.\\2\\ The Coast Guard's regulatory authority extends... 147 [Docket No. USCG-2012-0779] RIN 1625-AC05 Safety and Environmental Management System Requirements... a vessel-specific Safety and Environmental Management System (SEMS) that incorporates the management...

AEC controlled area safety program

Energy Technology Data Exchange (ETDEWEB)

Hendricks, D W [Nevada Operations Office, Atomic Energy Commission, Las Vegas, NV (United States)

1969-07-01

The detonation of underground nuclear explosives and the subsequent data recovery efforts require a comprehensive pre- and post-detonation safety program for workers within the controlled area. The general personnel monitoring and environmental surveillance program at the Nevada Test Site are presented. Some of the more unusual health-physics aspects involved in the operation of this program are also discussed. The application of experience gained at the Nevada Test Site is illustrated by description of the on-site operational and safety programs established for Project Gasbuggy. (author)

AEC controlled area safety program

International Nuclear Information System (INIS)

Hendricks, D.W.

1969-01-01

The detonation of underground nuclear explosives and the subsequent data recovery efforts require a comprehensive pre- and post-detonation safety program for workers within the controlled area. The general personnel monitoring and environmental surveillance program at the Nevada Test Site are presented. Some of the more unusual health-physics aspects involved in the operation of this program are also discussed. The application of experience gained at the Nevada Test Site is illustrated by description of the on-site operational and safety programs established for Project Gasbuggy. (author)

Ergonomic aspects simulation digital online: an educational game proposal to promote environmental education.

Science.gov (United States)

Arbex, D F; Jappur, R; Selig, P; Varvakis, G

2012-01-01

This article addresses the ergonomic criteria that guide the construction of an educational game called Environmental Simulator. The focus is on environment navigation considering aspects of content architecture and its esthetics functionality.

Nuclear Safety: Technical progress review, January--March 1989

Energy Technology Data Exchange (ETDEWEB)

Silver, E. G. [ed.

1989-01-01

This review journal covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

Nuclear Safety: Technical progress review, January-March 1988

Energy Technology Data Exchange (ETDEWEB)

Silver, E G [ed.

1988-01-01

This journal covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

Environmental and Occupational Safety Division annual progress report for 1984

International Nuclear Information System (INIS)

1985-11-01

Over 950 radiation workers were monitored at ORNL for both internal and external exposure to ionizing radiation and radioactive materials in 1984, and no employee exceeded 50% of the applicable DOE dose limit. No internal exposure exceeded 10% of the maximum permissible organ burden, as determined by in-vivo gamma spectrometry. Dose readings from 5000 TLDs and 136,000 pocket meters were determined, and more than 5800 calibrations were performed on these devices. Approximately 82,000 radioassays were performed; among these were 1500 urinalyses and 3000 radiochemical analyses. Over 3000 calibrations were performed for approximately 2000 portable and fixed survey instruments. Response teams were identified in support of the Radiological Assistance Program (RAP). Documentation, procedures, and equipment for the RAP vehicle were upgraded. A long-range environmental plan was issued early in the year and again in June 1984 to document the scope and justification for each project. The DEM is developing an environmental information system for managing DOE-ORO and ORNL environmental data. Five hundred eighty-four waste disposal requests containing 5769 items were handled by the Hazardous Materials Control Group during 1984. The Office of Operational Safety made significant progress in the completion of Safety Analysis Reports for existing facilities. The Radiation and Safety Surveys Department is becoming increasingly involved in work resulting in facility improvement, repair, or upgrade as well as decontamination and decommissioning of older facilities

Safety aspects of electric energy production and supplies in conditions of the Slovenske elektrarne, a.s

International Nuclear Information System (INIS)

Sip, M.; Danilak, M. et al.

2005-01-01

In this presentation author deals with safety aspects of electric energy production and supplies in conditions of the Slovenske elektrarne, a.s. Some terrorist attack and accidents are presented. Four video-sequences are included

Environmental aspects of electrochemistry and photoelectrochemistry

International Nuclear Information System (INIS)

Tomkiewicz, M.; Yoneyama, H.; Hori, Y.

1993-01-01

Arguably, the end of this century marks the beginning of an era in which an equilibrium between men and environment is no longer an option but a necessity. A full life cycle of new and old technologies will soon be a requirement. Electrochemistry probably plays a more fundamental role toward the end of the life-cycle of many technologies as compared to the beginning of the cycle. This symposium is the first of its kind within the Electrochemical Society in its attempt to unify diverse aspects of the environmental picture. In addition to the scientific interest in the various topics, this diversity reflects the various priorities that emerge in different countries. In Japan a strong emphasis is being put on the environmental consequences of CO 2 accumulation and hence the strong emphasis on CO 2 fixation. In the US and Europe the detoxification of aquatic environments seems at present to attract higher priorities. Almost everywhere there is a need to remedy the cumulative effect of total neglect since the dawn of the industrial revolution that can be traced differently in different parts of the world. In a somewhat arbitrary way the authors have divided the contributions into three categories: (1) CO 2 fixation, (2) Photocatalysis with TiO 2 , (3) Electrochemical decontaminations. Although this partition was done mainly for editorial convenience, it follows closely the clustering at the meeting. Individual papers are cataloged separately for inclusion in the appropriate data bases

Legal Aspects of Radioactive Waste Management: Relevant International Legal Instruments

International Nuclear Information System (INIS)

Wetherall, Anthony; Robin, Isabelle

2014-01-01

The responsible use of nuclear technology requires the safe and environmentally sound management of radioactive waste, for which countries need to have stringent technical, administrative and legal measures in place. The legal aspects of radioactive waste management can be found in a wide variety of legally binding and non-binding international instruments. This overview focuses on the most relevant ones, in particular those on nuclear safety, security, safeguards and civil liability for nuclear damage. It also identifies relevant regional instruments concerning environmental matters, in particular, with regard to strategic environmental assessments (SEAs), environmental impact assessments (EIAs), public access to information and participation in decision-making, as well as access to justice

Probabilistic analysis of some safety aspects of a swimming pool reactor

International Nuclear Information System (INIS)

Lieber, K.; Nicolescu, T.

1984-01-01

A probabilistic risk analysis of some safety aspects without the investigation of radioactivity release has been performed for the 10 MW (thermal) swimming-pool research reactor SAPHIR. Our presentation is focused on the 7 internal initiating events found to be relevant with respect to accident sequences that could result with core melt due to loss of coolant or overcriticality. The results are given by the core melt frequencies for the investigated accident sequences. It could be demonstrated by our investigation that the core melt hazard of the reactor is extremely low. (author)

Symposium proceedings: environmental aspects of fuel conversion technology, IV (April 1979, Hollywood, FL)

Energy Technology Data Exchange (ETDEWEB)

Ayer, F.A.; Jones, N.S. (comps.)

1979-09-01

The proceedings document presentations made at the symposium on Environmental Aspects of Fuel Conversion Technology are presented. The symposium acted as a colloquium for discussion of environmentally related information on coal gasification and liquefaction. The program included sessions on program approach, environmental assessment, and control technology development. Process developers, process users, research scientists and state and federal government officials participated in this symposium, the fourth to be conducted by IERL-RTP on the subject since 1974. Separate abstracts have been prepared of individual presentations for inclusion in the Energy Data Base.

Geothermal energy, an environmental and safety mini-overview survey

Energy Technology Data Exchange (ETDEWEB)

1976-07-01

A survey is presented in order to determine the technology status, gaps, and needs for research and development programs in the environment and safety areas of this resource. The information gathered from a survey of geothermal energy development undertaken to provide background for an environment and safety overview program is summarized. A technology assessment for resource development is presented. The three specific environmental problems identified as most potentially limiting to geothermal development; hydrogen sulfide control, brine disposal, and subsidence, are discussed. Current laws, regulations, and standards applying to geothermal systems are summarized. The elements of the environment, health, and safety program considered to be intrinsically related to the development of geothermal energy systems are discussed. Interagency interfaces are touched on briefly. (MHR)

The Food and Environmental Safety of Bt Crops

Directory of Open Access Journals (Sweden)

Michael Stephen Koch

2015-04-01

Full Text Available Bt (Bacillus thuringiensis microbial pesticides have a 50-year history of safe use in agriculture. Cry proteins are among the active insecticidal ingredients in these pesticides, and genes coding for Cry proteins have been introduced into agricultural crops using modern biotechnology. The Cry gene sequences are often modified to enable effective expression in planta and several Cry proteins have been modified to increase biological activity against the target pest(s. Additionally, the domains of different but structurally conserved Cry proteins can be combined to produce chimeric proteins with enhanced insecticidal properties. Environmental studies are performed and include invertebrates, mammals and avian species. Mammalian studies used to support the food and feed safety assessment are also used to support the wild mammal assessment. In addition to the NTO assessment, the environmental assessment includes a comparative assessment between the Bt crop and the appropriate conventional control that is genetically similar but lacks the introduced trait to address unintended effects. Specific phenotypic, agronomic, and ecological characteristics are measured in the Bt crop and the conventional control to evaluate whether the introduction of the insect resistance has resulted in any changes that might cause ecological harm in terms of altered weed characteristics, susceptibility to pests, or adverse environmental impact. Additionally, environmental interaction data are collected in field experiments for Bt crop to evaluate potential adverse effects. Further to the agronomic and phenotypic evaluation, potential movement of transgenes from a genetically modified crop plants into wild relatives is assessed for a new pest resistance gene in a new crop. This review summarizes the evidence for safety of crops containing Cry proteins for humans, livestock, and other non-target organisms.

Radiation Safety Aspects of Nanotechnology

Energy Technology Data Exchange (ETDEWEB)

Hoover, Mark [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Myers, David; Cash, Leigh Jackson [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Guilmette, Raymond [Ray Guilmette & Associates, LLC, Perry, ME (United States); Kreyling, Wolfgang [Helmholtz-Zentrum Munchen, (Germany); Oberdorster, Gunter [Univ. of Rochester, NY (United States); Smith, Rachel [Public Health England, Oxfordshire (United Kingdom). Centre for Radiation, Chemical and Environmental Hazards

2017-03-27

This Report is intended primarily for operational health physicists, radiation safety officers, and internal dosimetrists who are responsible for establishing and implementing radiation safety programs involving radioactive nanomaterials. It should also provide useful information for workers, managers and regulators who are either working directly with or have other responsibilities related to work with radioactive nanomaterials.

International cooperation in the safety and environmental assessment for the ITER engineering design activities

International Nuclear Information System (INIS)

Gordon, C.; Baker, D.J.; Bartels, H-W.

1998-01-01

The ITER Project includes design and assessment activities to ensure the safety and environmental attractiveness of ITER and demonstrate that it can be sited in any of the sponsoring Parties with a minimum of site-specific redesign. This paper highlights some of the efforts to develop an international consensus approach for ITER safety design and assessment, including: development of general safety and environmental design criteria; development of quantitative dose-release assessment criteria; development of a radiation protection program; waste characterization; and development of safety analysis guidelines. The high level of interaction, cooperation and collaboration between the Joint Central Team and the Home Teams, and between the safety team and designers, and the spirit of consensus that has guided them have resulted in a safe design for ITER and a safety design and assessment that can meet the needs of the potential host countries. (author)

Safety analysis and environmental effects of fusion concepts

International Nuclear Information System (INIS)

Anon.

1976-01-01

Fusion reactor concepts have been analyzed to determine the probable interactions with the environment and the resultant environmental effects. Two research projects on tritium oxidation in the atmosphere and carbon-14 formation in fusion reactors are briefly described. A study and report were completed, investigating the potential public safety impact of accidents in fusion power plants. After reviewing the existing information on conceptual fusion reactor designs, PNL identified areas of safety concern, making recommendations on how development of safety information might be best accomplished. Inventories of potentially dispersible toxic materials were classified, and general conclusions were made about their relative importance. The report specifies energy sources with a potential to initiate or propagate an accident. An important product of the study was an assessment logic developed to identify potential accident scenarios that could lead to the release of contaminants to the environment. Though the limited amount of fusion design information allows only a general assessment of accident-initiating events, the logic provides a method for making more detailed safety analyses as more design information becomes available. The same logic was used to identify technological areas where an R and D investment would enhance the technical bases for fusion designs as well as the understanding of safety implications in fusion systems

Staff report on the environmental qualification of safety-related electrical equipment

International Nuclear Information System (INIS)

1977-12-01

The current NRC safety review process for nuclear power plants includes criteria related to the qualification of certain electrical equipment. These criteria require that electrical equipment important to safety must be qualified to function in the environment that might result from various accident conditions. Although such criteria have been applied since the early days of commercial nuclear power, the details of these criteria have been changed over the years. The evolution of environmental qualification of safety-related electrical equipment is described in Appendix A

India's power programs and its concern over environmental safety

International Nuclear Information System (INIS)

Prasad, G.E.; Mittra, J.; Sarma, M.S.R.

2000-01-01

India's need for electrical power is enormous and per capita consumption of power is to be increased at least by 10 times to reach the level of the world average. Thermal power generation faces two-fold problems. First, there is scarcity of good quality fuel and second, increasing environmental pollution. India 's self reliant, . three stage, 'closed-fuel-cycle' nuclear power program is promising a better solution to the above problems. To ensure Radiation Protection and Safety of Radiation Sources, the Indian Nuclear Power program emphasizes upon design and engineering safety by incorporating' necessary safety features in the design, operational safety through a structured training program and typically through software packages to handle rare unsafe events and regulation by complying safety directives. A health survey among the radiation workers indicates that there is no extra threat to the public from the nuclear power program. Based on the latest technology, as available in case of the nuclear power option, it is quite possible to meet high energy requirements with least impact on the environment. (authors)

Social and environmental aspects of the Manantali dam. Retrospective assessment

International Nuclear Information System (INIS)

Ficatier, Yves; Niasse, Madiodio

2008-04-01

After the great drought of the 1970's, and in order to better exploit the water resources of the Senegal river basin, an important project had been launched which comprises the Diama and Manantali dams, the construction or rehabilitation of dikes, and the construction of a hydroelectric plant for the Manantali dam. In order to provide a retrospective assessment of the social and environmental aspects (impacts on agriculture, fishing, electricity production, water availability, and so on) associated with the Manantali dam, this study reports an analysis of major advances and problems noticed at the social and environmental level in the Senegal river basin, an assessment of negative and positive social and environmental impacts of various components of the project achieved with the financial support of French and German institutions (deforestation, construction of both dams, of dikes, and of the energy equipment), an analysis of the way these social and environmental impacts have been managed all along the planning and realisation process, an assessment of social and environmental impacts of the program as a whole (impact studies, realisation, noticed impacts, efficiency in impact management), an analysis of the way existing standards of the moment have been taken into account in the management of environmental issues, and a global assessment of the program according to criteria defined by the DAC (Development Assistance Committee) of the OECD: relevance, efficiency, impact on development, and sustainability

ENVIRONMENTAL ASPECTS OF "GREEN ECONOMY" RUSSIA'S ECONOMIC GROWTH

Directory of Open Access Journals (Sweden)

R. N. Botavina

2016-01-01

Full Text Available The article tells the story of the emergence of "green" economy, as opposed to the traditional "brown" ekonomike, given its concept shown shortcomings of the existing definitions of "green" economy, conclusions about the real possibilities of the transition to the growth of "green" economy. The relevance of this work lies in the fact that the changing paradigm of understanding the basis and essence of sustainable development of the national socio-economic systems necessitates the integration of economic and environmental solutions, this integration is seen as part of the concept of "green economy".The approach of this article is based on an interdisciplinary concept of quality management in relation to the specifics of functioning and development of the domestic socio-economic systems.The purpose / goal. The purpose of this article, and its main task is to systematize the areas of environmentally oriented development of economic entities, as well as the determination of the list of key provisions of environmental policy, which will provide further socio-economic development of Russia in line with the green economy. As a result, Russia as one of the great powers of the world will find a stable geopolitical situation.Methodology. The methodological basis of this article are comparative, economic and statistical analysis methods.Results. This article suggests some solutions to be included in the national environmental policy as a major incentive for the further transition to a green economy.Conclusions: The material contained in this article show the special role of the concept of "green economy" in the social and economic processes in the development of Russia's geo-economic stability. The above article aspects of the further development of the green economy in Russia can complement scientific and practical base solutions that provide active creation, implementation and use of green technologies to provide environmentally responsible sustainable

ESTIMATION OF PROCESSES REALIZATION RISK AS A MANNER OF SAFETY MANAGEMENT IN THE INTEGRATED SYSTEMS

Directory of Open Access Journals (Sweden)

Tatiana Karkoszka

2011-12-01

Full Text Available Realization of quality, environmental and occupational health and safety policy using the proposed model of processes' integrated risk estimation leads to the improvement of the analyzed productive processes by the preventive and corrective actions, and in consequence - to their optimization from the point of view of products' quality and in the aspect of quality of environmental influence and occupational health and safety.

ESTIMATION OF PROCESSES REALIZATION RISK AS A MANNER OF SAFETY MANAGEMENT IN THE INTEGRATED SYSTEMS

Directory of Open Access Journals (Sweden)

Tatiana Karkoszka

2011-06-01

Full Text Available Realization of quality, environmental and occupational health and safety policy using the proposed model of processes' integrated risk estimation leads to the improvement of the analyzed productive processes by the preventive and corrective actions, and in consequence - to their optimization from the point of view of products' quality and in the aspect of quality of environmental influence and occupational health and safety.

Aspects of radiation safety in the tin mining and processing industries in Malaysia

Energy Technology Data Exchange (ETDEWEB)

Giles, M S

1987-04-01

This study was undertaken at the request of the Malaysian nuclear regulatory authorities with the following objectives: to examine the individual steps in the mining, beneficiation, by-product treatment and smelting of tin-bearing minerals so as to highlight possible radiation safety effects and radiological environmental impacts; to make preliminary measurements on operations which are representative of the various steps in the processing of these minerals so as to determine the type and extent of future radiological survey programs; to examine the need for specific measurement techniques with a view to determining future training requirements. A representative operation of each of the steps in the tin mining and processing industry was visited, measurements were made and samples were collected to assess both the in-plant safety and offsite environmental effects of the operation. The results of measurements of gamma dose-rates, radon daughters-in-air, thoron daughters-in-air and radioactive respirable dusts are presented.

Ukraine International cooperation in nuclear and radiation safety: public-administrative aspect

Directory of Open Access Journals (Sweden)

I. P. Krynychnay

2017-03-01

Full Text Available The article examines international cooperation of Ukraine with other States in the sphere of ensuring nuclear and radiation safety and highlights the main directions of development and improvement of nuclear and radiation safety in Ukraine based on international experience, with the aim of preventing the risks of accidents and contamination areas radiological substances. Illuminated that for more than half a century of experience in the use of nuclear energy by the international community under the auspices of the UN, IAEA and other international organizations initiated and monitored the implementation of key national and international programs on nuclear and radiation safety. Of the Convention in the field of nuclear safety and the related independent peer review, effective national regulatory infrastructures, current nuclear safety standards and policy documents, as well as mechanisms of evaluation in the framework of the IAEA constitute important prerequisites for the creation of a world community, the global regime of nuclear and radiation safety. For analysis of the state of international cooperation of Ukraine with other States in the sphere of nuclear and radiation safety, highlighted the legal substance of nuclear and radiation safety of Ukraine, which is enshrined in the domestic Law of Ukraine «On nuclear energy use and radiation safety». Considered the most relevant legal relations. It is established that, despite the current complex international instruments, existing domestic legislation on nuclear and radiation safety, partly there is a threat of emergency nuclear radiation nature, in connection with the failure of fixed rules and programs, lack of funding from the state is not always on time and in full allows you to perform fixed strategy for overcoming the consequences of radiation accidents, the prevention of the threat of environmental pollution. Found that to improve and further ensuring nuclear and radiation safety of

Nuclear Safety: Volume 29, No. 3: Technical progress review

Energy Technology Data Exchange (ETDEWEB)

Silver, E G [ed.

1988-07-01

Nuclear Safety is a review journal that covers significant development in the field of nuclear safety. Its scope included the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Individual papers have been cataloged separately.

Environmental aspects of nuclear power: state- of-the-art

International Nuclear Information System (INIS)

Ibrahim, Y.M.; Hussein, A.S.

2007-01-01

Nuclear power is an environmentally benign source, as it does not contribute either to global warming or acid rains.However, nuclear power plants do release radioactive gaseous and liquid effluents, and dispose solid wastes. Nuclear power currently provides 6% of global energy and about 16% of global electricity supply. Up to March 2006 there were 441 nuclear power reactors in operation representing a total capacity of more than 368 gigawatt electricity .World Energy Council projects growth of global use of electricity will increase from 1990 levels by 50% to 75% by the year 2020. At the same time, there are indications that the continued use of traditional fissile fuel will have undesirable impacts on the world climate Nuclear power will have to play an increasingly impact role in long-term energy of the world to achieve the objectives of sustainable develop .This paper presents the recent environmental aspects of nuclear power

Status of Safety and Environmental Activities for Inertial Fusion Energy

International Nuclear Information System (INIS)

Latkowski, J.F.; Reyes, S.; Cadwallader, L.C.; Sharpe, J.P.; Marshall, T.D.; Merrill, B.J.; Moore, R.L.; Petti, D.A.; Falquina, R.; Rodriguez, A.; Sanz, J.; Cabellos, O.

2003-01-01

Over the past several years, significant progress has been made in the analysis of safety and environmental (S and E) issues for inertial fusion energy (IFE). Detailed safety assessments have been performed for the baseline power plant concepts, as well as for a conceptual target fabrication facility. Safety analysis results are helping to drive the agenda for experiments. A survey of the S and E characteristics - both radiological and chemical - of candidate target materials has been completed. Accident initiating events have been identified and incorporated into master logic diagrams, which will be essential to the detailed safety analyses that will be needed in the future. Studies of aerosol generation and transport will have important safety implications. A Monte Carlo-based uncertainty analysis procedure has been developed for use in neutron activation calculations. Finally, waste management issues are receiving increased attention and are deserving of further discussion

Dialogue and information dissemination process concerning the health and environmental aspects of hydrofracking; Informations- und Dialogprozess zur Sicherheit und Umweltvertraeglichkeit der Fracking-Technologie. Ergebnisse der Risikostudie

Energy Technology Data Exchange (ETDEWEB)

Borchardt, Dietrich; Richter, Sandra [Helmholtz-Zentrum fuer Umweltforschung GmbH - UFZ, Magdeburg (Germany). Dept. Aquatische Oekosystemanalyse und Management (ASAM); Ewen, Christoph [team ewen, Darmstadt (Germany); Hammerbacher, Ruth [hammerbacher gmbh - beratung und projekte, Osnabrueck (Germany)

2013-02-15

In Germany, several gas companies are currently prospecting for so-called unconventional natural gas reservoirs (shale gas and coal bed methane) in many parts of the country using the fracking technology (hydraulic fracturing). Therefore, a mixture of water, chemicals and sand is forced in the reservoir rock under high pressure in order to mobilize the enclosed gas. To address the sometimes massive public concerns about the safety and the environmental compatibility of the fracking technology the 'Dialogue and information dissemination process concerning the health and environmental aspects of hydrofracking' has been initiated. During the process recommendations have been developed by a panel of experts to promote a thoughtful, realistic and fact-based debate on the vices and virtues of hydrofracking. (orig.)

Safety aspects of siting

International Nuclear Information System (INIS)

Rosen, M.

1976-01-01

Outline of parameters to be considered in site selection, radiation safety, and mechanisms of radiation release. Radiation doses in tablular form for areas at various distances from the plant. (HP) [de

Relationship with environmental groups, the media and the public: aspects relating to environmental contaminations and safety

International Nuclear Information System (INIS)

Lacerda, J.R. de; Kepinski, A.; Almeida, M.J. de; Ferreira, A.L.V.

1993-01-01

In this article the Thermonuclear Directorate from FURNAS Centrais Eletricas S.A. looks at the brazilian situation and briefly reviews the relationship with environmental groups and the media. It them deals with nuclear power and public acceptance. In response, through their own programmes and with the support from governmental and non governmental initiatives a Nuclear Protection System Programme was organized. (B.C.A.). 01 fig, 04 tabs

Environmental aspects of the transuranics: a selected, annotated bibliography. [Pu-238, Pu-239

Energy Technology Data Exchange (ETDEWEB)

Ensminger, J.T.; Martin, F.M.; Fore, C.S. (comps.)

1977-03-01

This eighth published bibliography of 427 references is compiled from the Nevada Applied Ecology Information Center's Data Base on the Environmental Aspects of the Transuranics. The data base was built to provide information support to the Nevada Applied Ecology Group (NAEG) of ERDA's Nevada Operations Office. The general scope covers environmental aspects of uranium and the transuranic elements, with emphasis on plutonium. This bibliography highlights literature on plutonium 238 and 239 and americium in the critical organs of man and animals. Supporting information on ecology of the Nevada Test Site and reviews and summarizing literature on other radionuclides have been included at the request of the NAEG. The references are arranged by subject category with leading authors appearing alphabetically in each category. Indexes are provided for author(s), geographic location, keyword(s), taxon, title, and publication description.

Simplified LCA and matrix methods in identifying the environmental aspects of a product system.

Science.gov (United States)

Hur, Tak; Lee, Jiyong; Ryu, Jiyeon; Kwon, Eunsun

2005-05-01

In order to effectively integrate environmental attributes into the product design and development processes, it is crucial to identify the significant environmental aspects related to a product system within a relatively short period of time. In this study, the usefulness of life cycle assessment (LCA) and a matrix method as tools for identifying the key environmental issues of a product system were examined. For this, a simplified LCA (SLCA) method that can be applied to Electrical and Electronic Equipment (EEE) was developed to efficiently identify their significant environmental aspects for eco-design, since a full scale LCA study is usually very detailed, expensive and time-consuming. The environmentally responsible product assessment (ERPA) method, which is one of the matrix methods, was also analyzed. Then, the usefulness of each method in eco-design processes was evaluated and compared using the case studies of the cellular phone and vacuum cleaner systems. It was found that the SLCA and the ERPA methods provided different information but they complemented each other to some extent. The SLCA method generated more information on the inherent environmental characteristics of a product system so that it might be useful for new design/eco-innovation when developing a completely new product or method where environmental considerations play a major role from the beginning. On the other hand, the ERPA method gave more information on the potential for improving a product so that it could be effectively used in eco-redesign which intends to alleviate environmental impacts of an existing product or process.

Methodological proposal for identification and evaluation of environmental aspects and impacts of nuclear facilities of IPEN, Sao Paulo, SP, Brazil: a case study applied to the Nuclear Fuel Center

International Nuclear Information System (INIS)

Mattos, Luis Antonio Terribile de

2013-01-01

This work presents an application of Failure Mode Effect Analysis (FMEA) to the process of identification of environmental aspects and impacts as a part of implementation and maintenance of an Environmental Management System (EMS) in accordance with the NBR ISO 14001 standard. Also, it can contribute, as a complement, to the evaluation and improvement of safety of the installation focused. The study was applied to the Nuclear Fuel Center (CCN) of Nuclear and Energy Research Institute (IPEN), situated at the Campus of University of Sao Paulo, Brazil. The CCN facility has the objective of promoting scientific research and of producing nuclear fuel elements for the IEA-R1 Research Reactor. To identify the environmental aspects of the facility activities, products, and services, a systematic data collection was carried out by means of personal interviews, documents, reports and operation data records consulting. Furthermore, the processes and their interactions, failure modes, besides their causes and effects to the environment, were identified. As a result of a careful evaluation of these causes it was possible to identify and to classify the major potential environmental impacts, in order to set up and put in practice an Environmental Management System for the installation under study. The results have demonstrated the validity of the FMEA application to nuclear facility processes, identifying environmental aspects and impacts, whose controls are critical to achieve compliance with the environmental requirements of the Integrated Management System of IPEN. It was demonstrated that the methodology used in this work is a powerful management tool for resolving issues related to the conformity with applicable regulatory and legal requirements of the Brazilian Nuclear Energy Commission (CNEN) and the Brazilian Institute of Environment (IBAMA). (author)

Group contribution modelling for the prediction of safety-related and environmental properties

DEFF Research Database (Denmark)

Frutiger, Jerome; Abildskov, Jens; Sin, Gürkan

warming potential and ozone depletion potential. Process safety studies and environmental assessments rely on accurate property data. Safety data such as flammability limits, heat of combustion or auto ignition temperature play an important role in quantifying the risk of fire and explosions among others......We present a new set of property prediction models based on group contributions to predict major safety-related and environmental properties for organic compounds. The predicted list of properties includes lower and upper flammability limits, heat of combustion, auto ignition temperature, global...... models like group contribution (GC) models can estimate data. However, the estimation needs to be accurate, reliable and as little time-consuming as possible so that the models can be used on the fly. In this study the Marrero and Gani group contribution (MR GC) method has been used to develop the models...

Domain 2: Sport Safety and Injury Prevention

Science.gov (United States)

Gurchiek, Larry; Mokha, Monique Butcher

2004-01-01

Most coaches recognize the importance of creating a safe environment and preventing injuries of their athletes. Domain 2 is dedicated to this important aspect of coaching, and outlines specific areas within safety and injury prevention that coaches should address. Domain 2 sets the standards for facility, equipment, and environmental safety…

Some aspects of solid track detector usage in ecological research

International Nuclear Information System (INIS)

Berzina, I.G.; Gusev, E.B.; Ivanov, V.A.

1991-01-01

The ability of plants to accumulate large quantities of uranium in areas with unfavorable environmental conditions caused by the open working of various deposits and the mining of uranium containing minerals is discussed. The experimental data show the need for qualitative and quantitative revisions of radiation safety levels. Aspects of the use of solid state track detectors in this research are presented. (author)

Environmental aspects of Greenfield NPP site in northern Finland

International Nuclear Information System (INIS)

Kopisto, L.

2015-01-01

Fennovoima will build a nuclear power plant of 1200 MW at Hanhikivi headland in Pyhaejoki, Northern Finland on the shore of the Baltic Sea. According to the target schedule the plant will produce electricity in 2024. The plant supplier is Rusatom Overseas, subsidiary of the Russian Rosatom. No industrial activity is practiced in the immediate surroundings of the site area and the headland and its surroundings are sparsely populated. The area is in its natural state. This means that all the preparatory and infrastructure works needs to be done before the construction of NPP can start. The environmental and nature conservation aspects have to be taken into consideration in planning, construction and operation of the NPP. Northern location sets some challenges to the design of the power plant. The sea area is normally covered with ice almost half of the year which has to be taken into account in the design of the power plant. But there are also advantages: in winter when the cooling water is cold the efficiency of electricity production is estimated to be exceptionally good, approximately 39 %. Since 2008, Fennovoima has carried out several environmental studies and surveys in the site area and has collected information about the nature conditions on land and in the sea area. The collected environmental data has been utilized in land use planning, environmental impact assessment procedure and in applying for conventional permits. The environmental data can also be used as baseline data. The document is composed of an abstract and the presentation slides

Strategic aspects of nuclear safety in Eastern and Western Europe

International Nuclear Information System (INIS)

Missfeldt, F.

1998-05-01

This thesis deals with the economics of nuclear safety in Europe. It focuses on the potential damage to a neighbouring country in the event of a major accident: the disaster in Chernobyl made public not only the fatal consequences of a nuclear accident but also the hazardous state of the nuclear industry in the East. Here, game theory is used to analyse the crossborder hazards of a major nuclear accident. The expected damage in the event of a major nuclear accident is to this end interpreted as transboundary pollutant. In Part 1, scientific, economic and political aspects of nuclear safety in East and West are reviewed. Taking this discussion into consideration, Part 2 develops a static nuclear power game. Two actors, East and West, adjust their nuclear safety in response to the risk in the neighbouring region. If both regions cooperate, more risk abatement is undertaken than under the non-cooperative Nash equilibrium. If the West acts as a Stackelberg leader, it does less risk abatement than under Nash. Using data from Part 1, it is shown that total welfare gains are highest when transfer payments can be made as under full cooperation. If differentials in damage valuation and to a lesser extent transborder spillovers are high, total welfare is highest when both regions fully cooperate. Without the possibility of side payments only a Pareto dominant outcome can be reached, which yields very low benefits. This is due to the highly asymmetric setting of the nuclear game. Part 3 develops an optimal control model in order to examine safety capital accumulation and the interaction between players over time. It is shown that under communism safety levels were set at the technically lowest level, as target fulfilment had overriding priority. Current levels of safety are also shown to be inadequate for reasons which include limited liability in the West, and high discount rates and low quality workers and morale in the East. A differential game setting confirms the static

How can nanobiotechnology oversight advance science and industry: examples from environmental, health, and safety studies of nanoparticles (nano-EHS)

International Nuclear Information System (INIS)

Wang Jing; Asbach, Christof; Fissan, Heinz; Hülser, Tim; Kuhlbusch, Thomas A. J.; Thompson, Drew; Pui, David Y. H.

2011-01-01

Nanotechnology has great potential to transform science and industry in the fields of energy, material, environment, and medicine. At the same time, more concerns are being raised about the occupational health and safety of nanomaterials in the workplace and the implications of nanotechnology on the environment and living systems. Studies on environmental, health, and safety (EHS) issues of nanomaterials have a strong influence on public acceptance of nanotechnology and, eventually, affect its sustainability. Oversight and regulation by government agencies and non-governmental organizations (NGOs) play significant roles in ensuring responsible and environmentally friendly development of nanotechnology. The EHS studies of nanomaterials can provide data and information to help the development of regulations and guidelines. We present research results on three aspects of EHS studies: physico-chemical characterization and measurement of nanomaterials; emission, exposure, and toxicity of nanomaterials; and control and abatement of nanomaterial releases using filtration technology. Measurement of nanoparticle agglomerates using a newly developed instrument, the Universal NanoParticle Analyzer (UNPA), is discussed. Exposure measurement results for silicon nanoparticles in a pilot scale production plant are presented, as well as exposure measurement and toxicity study of carbon nanotubes (CNTs). Filtration studies of nanoparticle agglomerates are also presented as an example of emission control methods.

Aspects and Polymorphism in AspectJ

DEFF Research Database (Denmark)

Lorenz, David Harel; Ernst, Erik

2003-01-01

There are two important points of view on inclusion or subtype polymorphism in object-oriented programs, namely polymorphic access and dynamic dispatch. These features are essential for object-oriented programming, and it is worthwhile to consider whether they are supported in aspect-oriented......J as the basis for the presentation. The results are not exclusive to AspectJ---aspectual polymorphism may make aspects in any comparable AOSD language more expressive and reusable across programs, while preserving safety....

Functions of the National Board for Atomic Safety and Radiation Protection of the German Democratic Republic

International Nuclear Information System (INIS)

1985-01-01

Functions of the National Board for Atomic Safety and Radiation Protection of the GDR are described considering the following aspects: Nuclear plant safety, nuclear safeguards, physical protection, safety in working areas, environmental protection including radioactive waste management, protection of man by medical supervision and dosimetry, further training, international co-operation and information. (author)

Identifying environmental safety and health requirements for an Environmental Restoration Management Contractor

International Nuclear Information System (INIS)

Beckman, W.H.; Cossel, S.C.; Alhadeff, N.; Lindamood, S.B.; Beers, J.A.

1993-10-01

The purpose of the Standards/Requirements Identification Program, developed partially in response to the Defense Nuclear Facilities Safety Board Recommendation 90-2, was to identify applicable requirements that established the Environmental Restoration Management Contractor's (ERMC) responsibilities and authorities under the Environmental Restoration Management Contract, determine the adequacy of these requirements, ascertain a baseline level of compliance with them, and implement a maintenance program that would keep the program current as requirements or compliance levels change. The resultant Standards/Requirements Identification Documents (S/RIDs) consolidate the applicable requirements. These documents govern the development of procedures and manuals to ensure compliance with the requirements. Twenty-four such documents, corresponding with each functional area identified at the site, are to be issued. These requirements are included in the contractor's management plan

Health and safety aspects of textile workers from Solapur (India textile industries

Directory of Open Access Journals (Sweden)

Rahul B Hiremath

2014-12-01

Full Text Available Introduction: Textile sector in India plays an important role in the country's economy, providing employment to a significant population in rural and urban areas. Objectives: This paper focuses on health and safety aspects of textile workers in Solapur City (one of the key textile cluster in the state of Maharashtra, India. Methodology: A sample of 180 workers from the identified textile industries of Solapur city were assessed for their general physique, muscle tone, lung condition, and eyesight using different techniques. The study aimed at developing a framework for understanding risks to textile workers resulting from lack of health and safety standards in companies. Results: Findings showed that most of the workers have been affected by respiratory problems, increase in muscle tone, eye problems and musculoskeletal problem. It has been also observed that job security or regular work impacts positively to the worker’s long term body health. However, there is an immediate need to adopt and implement measures in accordance with Indian Factories Act (OHSAS 18001/ILO-OSH 2001 which includes directions and procedures in respect of industrial installations, work environment and occupational health and safety guidelines.

Safety aspects on dependability management for a TRIGA research reactor in Romania

International Nuclear Information System (INIS)

Vieru, Gheorghe

2002-01-01

Safety on the management for a nuclear research reactor involves a 'good dependability management' of the activities, such as: reliability, availability, maintainability and maintenance support. In order to evaluate the safety management aspects intended to be applied at a research reactor management, the performance dependability indicators and their impact over the availability and reactor safety have to be established. The document ISO 9000-4/IEC 300-1 'Dependability Management' (1995), describes five internationally agreed indicators of the reactor equipment dependability, each of them can be used for corrective maintenance or for preventive maintenance, such as: I 1 - equipment Maintenance Frequency; I 2 - equipment Maintenance Effort; I-3 - equipment Maintenance Downtime Factor; I 4 - equipment Maintenance Contribution to the System Function Downtime Factor; I 5 - equipment Maintenance Contribution to the reactor Capability Loss Factor. The paper presents an evaluation of those 5 mentioned indicators with referring only at the primary circuit of the INR's TRIGA research reactor and conclusion. The analyzed period was stated between 1994-1999. It is to be noted that this type of analyze is performed for the first time for a research reactor. (author)

Bechtel Hanford, Inc./ERC team health and safety plan Environmental Restoration Disposal Facility operations

International Nuclear Information System (INIS)

Turney, S.R.

1996-02-01

A comprehensive safety and health program is essential for reducing work-related injuries and illnesses while maintaining a safe and health work environment. This document establishes Bechtel Hanford, Inc. (BHI)/Environmental Restoration Contractor (ERC) team requirements, policies, and procedures and provides preliminary guidance to the Environmental Restoration Disposal Facility (ERDF) subcontractor for use in preparing essential safety and health documents. This health and safety plan (HASP) defines potential safety and health issues associated with operating and maintaining the ERDF. A site-specific HASP shall be developed by the ERDF subcontractor and shall be implemented before operations and maintenance work can proceed. An activity hazard analysis (AHA) shall also be developed to provide procedures to identify, assess, and control hazards or potential incidents associated with specific operations and maintenance activities

Nuclear safety. Volume 36, Number 2, July--December 1995

Energy Technology Data Exchange (ETDEWEB)

None

1995-12-01

The primary scope of the journal is safety in the design, construction, operation, and decommissioning of nuclear power reactors worldwide and the research and analysis activities that promote this goal, but it also encompasses the safety aspects of the entire nuclear fuel cycle, including fuel fabrication, spent-fuel processing and handling, and nuclear waste disposal, the handling of fissionable materials and radioisotopes, and the environmental effects of all these activities. The following subjects are covered here: (1) the Chernobyl accident; (2) general safety considerations; (3) accident analysis; (4) design features; (5) environmental effects; (6) operating experiences; (7) US NRC information and analyses; and (8) recent developments. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

Regulatory inspection practices for industrial safety (electrical, mechanical, material handling and conventional aspects)

International Nuclear Information System (INIS)

Agarwal, K.

2017-01-01

Regulatory Inspection (RI) of BARC facilities and projects are carried out under the guidance of BARC Safety Council (BSC) Secretariat. Basically facilities and projects have been divided into two board categories viz. radiological facilities and non-radiological facilities. The Rls of radiological facilities should be carried out under OPSRC and of non-radiological facilities under CFSRC. Periodicity of inspection shall be at least once in a year. The RI of projects is carried out under concerned DSRC. RI practices with industrial safety which includes electrical, mechanical, material handling and conventional aspect for these facilities starts with check lists. The inspection areas are prepared in the form of checklists which includes availability of approved documents, compliance status of previous RIT and various safety committee's recommendations, radiological status of facilities, prompt reporting of safety related unusual occurrences, major incident, site visit for verification of actual status of system/plant. The practices for inspection in the area of electrical safety shall include checking of maintenance procedure for all critical class IV system equipment's such as HT panel, LT panel, transformer and motors. Load testing of Class III system such as D.G. set etc. shall be carried out as technical specification surveillance schedule. Status of aviation lights, number of qualified staff, availability of qualified staff etc. shall be form of inspection

Environmental Health and Safety Status of Schools: Case Study in Paveh City of Kermanshah Province

Directory of Open Access Journals (Sweden)

Seyyed Alireza Mousavi

2017-10-01

Full Text Available Background & Aims of the Study: A most part of children time is spent in a school environment. Important part of the basic mission of schools is promoting the health and safety. So assessing the existing conditions is an important factor in promotion and this study conducted to investigate the environmental health and safety status of Paveh city schools in Kermanshah province. Materials & Methods: This is a descriptive-cross sectional study and has performed in Paveh city of Kermanshah province. The study population consisted of primary, secondary and high schools of Paveh city. Data has been collated by referring to schools, direct observation and completion of environmental health and safety checklist. Schools conditions were determined according to the environmental health and safety checklist in desirable, semi-desirable and undesirable. The collected data were analyzed using Excel software, and data means and frequencies sign in tables and were drawn by charts. Results: From the 28 schools have visited 35.6% of school building is old and 63.7% of school building is new built. In the study of all schools in 8% of schools environmental health status were undesirable and in 21% semi-desirable and in 71% were desirable, also safety status in 4% of all schools were undesirable  and in 21% semi-desirable and in 75% were desirable. Undesirable safety conditions related to adjacent to waste accumulation areas, brick buildings without footing beam, inappropriate distance of  first row bench from the boards, lack of green spaces Conclusion: Given the importance of safety in schools, more attention should be paid to this issue. It is essential to compliance with the principles of health and safety in schools, also any consideration and action in this field can be effective in reducing the risk of many related health problems.

EURISOL-DS Multi‐MW Target: Radiological Protection, Radiation Safety and Shielding Aspects

CERN Document Server

Y. Romanets and R. Luís (ITN)

The objective of this work was to carry out a detailed study and analysis of all aspects related toradioprotection and radiation safety of the spallation target area and the whole spaces reservedfor the fission targets and spallation target maintenance. Operational and no‐operationalconditions were considered for an evaluation of the radiation safety conditions.An analysis of the proposed shielding dimensions and configuration was performed for thesystem during operation time. Parameters as activation, dose rate, energy deposition, etc. aremore important for the no‐operation period, in order to evaluate the hazard level anddetermine the staff access type to the maintenance areas (direct or remote control).Such elements as the fission targets and the whole structure involved on it were studied in moredetail because of the disposal issues, after operation. Activation, dose rate and residual nuclideswere studied for each element of the assembly. All parameters were analyzed according to their...

Inconsistent food safety pressures complicate environmental conservation for California produce growers

Directory of Open Access Journals (Sweden)

Patrick Baur

2016-08-01

Full Text Available Controlling human pathogens on fresh vegetables, fruits and nuts is imperative for California growers. A range of rules and guidelines have been developed since 2006, when a widespread outbreak of E. coli O157:H7 was linked to bagged spinach grown in California. Growers face pressure from industry and government sources to adopt specific control measures on their farms, resulting in a complex, shifting set of demands, some of which conflict with environmental stewardship. We surveyed 588 California produce growers about on-farm practices related to food safety and conservation. Nearly all respondents considered both food safety and environmental protection to be important responsibilities for their farms. Responses indicate that clearing vegetation to create buffers around cropped fields, removing vegetation from ditches and ponds, and using poison bait and wildlife fences are commonly used practices intended to reduce wildlife movements onto farm fields. The survey also revealed that on-farm practices vary substantially even among farms with similar characteristics. This variability suggests inconsistencies in food safety requirements, auditors' interpretations or growers' perception of the demands of their buyers. Although site-specific considerations are important and practices should be tailored to local conditions, our findings suggest growers, natural resources and food safety would benefit from clearer, more consistent requirements.

International Environmental Agreements: Emissions Trade, Safety Valves and Escape Clauses

International Nuclear Information System (INIS)

Karp, Larry; Zhao, Jinhua

2010-01-01

We explain how the structure of multi-national or multi-regional environmental agreements affect their chance of success. Trade in emissions permits has ambiguous and in some cases surprising effects on both the equilibrium level of abatement, and on the ability to persuade nations or regions to participate in environmental agreements. An escape clause policy and a safety valve policy have essentially the same properties when membership in environmental agreement is pre-determined, but they create markedly different effects on the incentives to join such an agreement. The two policies lead to a qualitative difference in the leverage that a potential member of the agreement exercises on other members

Overview of environmental control aspects for the gas-cooled fast reactor

International Nuclear Information System (INIS)

Nolan, A.M.

1981-05-01

Environmental control aspects relating to release of radionuclides have been analyzed for the Gas-Cooled Fast Reactor (GCFR). Information on environmental control systems was obtained for the most recent GCFR designs, and was used to evaluate the adequacy of these systems. The GCFR has been designed by the General Atomic Company as an alternative to other fast breeder reactor designs, such as the Liquid Metal Fast Breeder Reactor (LMFBR). The GCFR design includes mixed oxide fuel and helium coolant. The environmental impact of expected radionuclide releases from normal operation of the GCFR was evaluated using estimated collective dose equivalent commitments resulting from 1 year of plant operation. The results were compared to equivalent estimates for the Light Water Reactor (LWR) and High-Temperature Gas-Cooled Reactor (HTGR). A discussion of uncertainties in system performances, tritium production rates, and radiation quality factors for tritium is included

IMPACTS OF SAFETY and QUALITY IN ENVIRONMENTAL RESTORATION AT HANFORD

International Nuclear Information System (INIS)

PREVETTE, S.S.

2004-01-01

The aim of this paper is to demonstrate the integration of safety methodology, quality tools, leadership, and teamwork at Hanford and their significant positive impact on safe performance of work. Control charts, Pareto Charts, Dr. W. Edward Deming's Red Bead Experiment, and Dr. Deming's System of Profound Knowledge have been the principal tools and theory of an integrated management system. Coupled with involved leadership and teamwork they have led to significant improvements in worker safety and protection, and environmental restoration at one of the nation's largest nuclear cleanup sites

International conference on the strengthening of nuclear safety in Eastern Europe. Keynote papers. Regulatory aspects of NPP safety, status of safety improvements, status of safety analysis report

International Nuclear Information System (INIS)

1999-06-01

The Objective of the Conference was to assess the past decade of nuclear safety efforts in countries operating WWER and RBMK nuclear reactors and to address remaining safety issues which require further work. A particular focus of the Conference was on international co-operation and assistance and where such efforts should be focused in the future. All Eastern European countries that operate RBMK or WWER reactors participated in the Conference, and presented papers on three key areas of nuclear safety: Regulatory Aspects of Nuclear Power Plant Safety; Status of Safety Improvements; and Status of Safety Analysis Reports. In addition, representatives from 18 additional countries that provide financial and/or technical assistance and co-operation in the area of WWER and RBMK safety offered the most extensive commentary. Key international (IAEA, World Association of Nuclear Operators, the Nuclear Energy Agency, the G-24 NUSAC, the European Commission, and the EBRD) organizations that provide nuclear safety assistance for WWER and RBMK reactors also made presentations. There is no question that considerable progress on nuclear safety has been made in Eastern Europe. Special mention should be made of successful efforts to strengthen the independence and technical competence of the nuclear regulatory authorities. Efforts should now concentrate on improving the depth and scope of the technical abilities of the regulatory authorities. More attention by governments is needed to ensure that the regulatory authorities have the financial resources and enforcement authority to fully execute their missions. In respect to the operators of the nuclear power plants, they have demonstrated clear progress in operational safety improvements. Significant additional efforts are required to maintain and enhance an effective safety culture. Design safety improvement programmes are in place in all countries. Implementation of these programmes has varied and is particularly affected by

Safety aspects of the US advanced LMR [liquid metal reactor] design

International Nuclear Information System (INIS)

Pedersen, D.R.; Gyorey, G.L.; Marchaterre, J.F.; Rosen, S.

1989-01-01

The cornerstones of the United States Advanced Liquid Metal Cooled Reactor (ALMR) program sponsored by the Department of Energy are: the plant design program at General Electric based on the PRISM (Power Reactor Innovative Small Module) concept, and the Integral Fast Reactor program (IFR) at Argonne National Laboratory (ANL). The goal of the US program is to produce a standard, commercial ALMR, including the associated fuel cycle. This paper discusses the US regulatory framework for design of an ALMR, safety aspects of the IFR program at ANL, the IFR fuel cycle and actinide recycle, and the ALMR plant design program at GE. 6 refs., 5 figs

IAEA advisory group meeting on nuclear data for radiation damage assessment and related safety aspects, Vienna, 12-16 October 1981

International Nuclear Information System (INIS)

Kocherov, N.

1982-01-01

This Advisory Group Meeting on Nuclear Data for Radiation Damage Assessment and Related Safety Aspects was convened by the IAEA Nuclear Data Section, at IAEA Headquarters in Vienna, Austria, from 12-16 October 1981. The meeting was attended by 34 participants from 15 countries and 2 international organizations. The main objective of the meeting was to review the requirements for and the status of nuclear data needed for radiation damage estimates in reactor structural materials and related reactor safety aspects, and to develop recommendations to the Nuclear Data Section of the IAEA for its future activities in this field. (author)

Environmental tests of a digital safety channel: An investigation of stress-related vulnerabilities of computer-based safety system

International Nuclear Information System (INIS)

Korsah, K.; Wilson, T.L.; Wood, R.; Tanaka, T.

1997-01-01

This article presents the results of environmental stress tests performed on an experimental digital safety channel (EDSC) assembled at the Oak Ridge National Laboratory as part of the Qualification of Advanced Instrumentation and Controls Systems Research program, which was sponsored by the US Nuclear Regulatory Commission. The program is expected to provide recommendations for environmental qualification of digital safety systems. The purpose of the study was to investigate potential vulnerabilities of distributed computer systems used in safety applications when subjected to environmental stressors. The EDSC assembled for the tests employs technologies and digital subsystems representative of those proposed for use in advanced light-water reactors or as retrofits in existing plants. Subsystems include computers, electrical and optical serial communication links, fiber-optic network links, analog-to-digital and digital-to-analog converters, and multiplexers. The EDSC was subjected to selected stressors that are a potential risk to digital equipment in a mild environment. The selected stressors were electromagnetic and radiofrequency interferences (EMI-RFI), temperature, humidity, and smoke exposure. The stressors were applied at levels of intensity considerably higher than the safety channel is likely to experience in a normal nuclear power plant environment. Ranges of stress were selected at a sufficiently high level to induce errors so that failure modes that are characteristic of the technologies employed could be identified. On the basis of the incidence of functional errors observed during testing, EMI-RFI, smoke exposure, and high temperature coupled with high relative humidity, in that order, were found to have the greatest impact of the stressors investigated. The most prevalent stressor-induced upsets, as well as the most severe, were found to occur during the EMI-RFI tests

Optimal flight altitude and flight routes with respect to environmental and economical aspects

Energy Technology Data Exchange (ETDEWEB)

Nodorp, D.; Sausen, R.; Land, C. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Oberpfaffenhofen (Germany). Inst. fuer Physik der Atmosphaere; Deidewig, F. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Koeln (Germany). Inst. fuer Antriebstechnik

1997-12-31

A flight routing method is presented. In addition to conventional minimization of travel time and/or fuel consumption it also takes into account the environmental impact of the aircraft emissions on the climate system. In the process the ECHAM general circulation model is used to trace the pollutants after release, estimate their potential to cause damage and to weight this environmental relative to the economical aspect. Some case studies are presented for an Airbus A340 in the North Atlantic flight corridor. (author) 6 refs.

Optimal flight altitude and flight routes with respect to environmental and economical aspects

Energy Technology Data Exchange (ETDEWEB)

Nodorp, D; Sausen, R; Land, C [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Oberpfaffenhofen (Germany). Inst. fuer Physik der Atmosphaere; Deidewig, F [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Koeln (Germany). Inst. fuer Antriebstechnik

1998-12-31

A flight routing method is presented. In addition to conventional minimization of travel time and/or fuel consumption it also takes into account the environmental impact of the aircraft emissions on the climate system. In the process the ECHAM general circulation model is used to trace the pollutants after release, estimate their potential to cause damage and to weight this environmental relative to the economical aspect. Some case studies are presented for an Airbus A340 in the North Atlantic flight corridor. (author) 6 refs.

Liquefied gaseous fuels safety and environmental control assessment program: third status report

Energy Technology Data Exchange (ETDEWEB)

1982-03-01

This Status Report contains contributions from all contractors currently participating in the DOE Liquefied Gaseous Fuels (LG) Safety and Environmental Control Assessment Program and is presented in two principal sections. Section I is an Executive Summary of work done by all program participants. Section II is a presentation of fourteen individual reports (A through N) on specific LGF Program activities. The emphasis of Section II is on research conducted by Lawrence Livermore National Laboratory (Reports A through M). Report N, an annotated bibliography of literature related to LNG safety and environmental control, was prepared by Pacific Northwest Laboratory (PNL) as part of its LGF Safety Studies Project. Other organizations who contributed to this Status Report are Aerojet Energy Conversion Company; Applied Technology Corporation; Arthur D. Little, Incorporated; C/sub v/ International, Incorporated; Institute of Gas Technology; and Massachusetts Institute of Technology. Separate abstracts have been prepared for Reports A through N for inclusion in the Energy Data Base.

An integrative model of organizational safety behavior.

Science.gov (United States)

Cui, Lin; Fan, Di; Fu, Gui; Zhu, Cherrie Jiuhua

2013-06-01

This study develops an integrative model of safety management based on social cognitive theory and the total safety culture triadic framework. The purpose of the model is to reveal the causal linkages between a hazardous environment, safety climate, and individual safety behaviors. Based on primary survey data from 209 front-line workers in one of the largest state-owned coal mining corporations in China, the model is tested using structural equation modeling techniques. An employee's perception of a hazardous environment is found to have a statistically significant impact on employee safety behaviors through a psychological process mediated by the perception of management commitment to safety and individual beliefs about safety. The integrative model developed here leads to a comprehensive solution that takes into consideration the environmental, organizational and employees' psychological and behavioral aspects of safety management. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Environmental aspects of electricity generation from a nanocrystalline dye sensitized solar cell system

International Nuclear Information System (INIS)

Greijer, Helena; Karlson, Lennart; Lindquist, Sten-Eric; Hagfeldt, Anders

2001-01-01

A Life Cycle Assessment, LCA, of a nanocrystalline dye sensitised solar cell (ncDSC) system has been performed, according to the ISO14040 standard. In brief, LCA is a tool to analyse the total environment impact of a product or system from cradle to grave. Six different weighing methods were used to rank and select the significant environmental aspects to study further. The most significant environmental aspects according to the weighing methods are emission of sulphur dioxide and carbon dioxide. Carbon dioxide emission was selected as the environmental indicator depending on the growing attention on the global warming effect. In an environmental comparison of electricity generation from a ncDSC system and a natural gas/combined cycle power plant, the gas power plant would result in 450 g CO 2 /kWh and the ncDSC system in between 19-47 g CO 2 /wWh. The latter can be compared with 42 g CO 2 /kWh, according to van Brummelen et al. 'Life Cycle Assessment of Roof Integrated Solar Cell Systems, (Report: Department of Science, Technology and Society, Utrecht University, The Netherlands, 1994)' for another thin film solar cell system made of amorphous silicon. The most significant activity/component contributing to environmental impact over the life cycle of the ncDSC system is the process energy for producing the solar cell module. Secondly comes the components; glass substrate, frame and junction box. The main improvement from an environmental point of view of the current technology would be an increase in the conversion efficiency from solar radiation to electricity generation and still use low energy demanding production technologies. Also the amount of material in the solar cell system should be minimised and designed to maximise recycling. (Author)

Plutonium working group report on environmental, safety and health vulnerabilities associated with the Department's plutonium storage. Volume II, part 2: Hanford working group assessment team report

International Nuclear Information System (INIS)

1994-09-01

In a memorandum dated January 24, 1994, the Secretary of Energy initiated a department-wide assessment of current plutonium-related safety and environmental vulnerabilities at Department of Energy (DOE) nuclear facilities. In a March 15, 1994 memorandum, the Secretary directed the Office of Environment, Safety and Health (ES ampersand H) to take the lead in coordinating this assessment, which will help to establish the plutonium portion of the foundation for decision making related to the ES ampersand H aspects of national surplus fissile material disposition efforts. This DOE-wide plutonium vulnerability assessment is intended to provide the information base needed to identify and prioritize interim corrective actions for the safe management of these materials

Seminar series on Safety matters

CERN Multimedia

HSE

2010-01-01

The HSE - Occupational Health & Safety and Environmental Protection - Unit is starting a seminar series on Safety matters. The aim is to invite colleagues from Universities, Industries or Government Agencies to share their experience. The seminars will take place in intervals of several months. Part of the Seminars will be held in the form of a Forum where participants can discuss and share views with persons who manage, teach or research Safety matters elsewhere. You are invited to the first Safety Seminar on 22nd September 2010 at 10h00 in building 40 S2 A1 "Salle Andersson" L’Ecole Polytechnique Fédérale de Lausanne (EPFL) will present the way safety is managed in their research institution. Some aspects of research in physics and chemical laboratories will also be presented. The seminar will be given by Dr Thierry Meyer, Head of OHS at FSB-EPFL and Dr Amela Groso, responsible for the safety of the physics institutes

The internationalization of nuclear safety

International Nuclear Information System (INIS)

Rosen, M.

1989-01-01

Nuclear safety is interlinked in many ways with the themes of this conference. In searching for co-operative activities that touch on global energy and environmental problems and on initiatives that relieve international tensions, the ongoing developments in nuclear power safety offer a number of successful examples. Commercial nuclear power has been with us for more than 30 years, and with 26 countries operating plants in addition to 6 more constructing their first, there has been an ongoing global co-operation, coinciding of Chernobyl with Glasnost, along with the increasing awareness of the benefits of common solutions to safety issues, have brought about an internationalization of nuclear safety. Although the main responsibility for safety rests with each operator and its government, a primary driving force expanding international co-operation is the transboundary aspects of nuclear energy, as vividly demonstrated by Chernobyl accident. In this presentation we focus on the mechanisms already in place that foster cooperation in the nuclear safety area

Nanomaterials: new challenges in environmental health and safety

International Nuclear Information System (INIS)

Sun, Casper; Gallaghar, Robert G.

2008-01-01

A follow-up of the Nano-panel discussion in the 41 st Midyear Health Physics Society (HPS) meeting, Oakland CA, 'Accelerators and Nanoparticles' have been introduced to and discussed among participants, i.e., health physicists, especially within the topic that monitoring and measurement of nano-radioactive materials. It is documented clearly that the chemistry and physical mobility and optical properties, and the monitoring and protection requirements for nano-radioactive substances vary observed from collective experiences. Soon after nanocarbon-tube discovery and use of the innovated materials expand, as nanoscience and nanotechnogy, exponential globally and revolutionized in just about every industries, for examples, agricultural, chemical, biological, pharmaceutical, medical, electronic, green-energies. To produce individual desired benefits, the engineered tiny substances could add health risk inevitably to the workers and consumers. The environmental health and safety (EH and S) research budgets and awareness programs have been steady increased in according with National Nanotechnology Initiative (NNI) report. All nanoscale materials which they have virtually invisible and yet can penetrate and deposit on cell walls of living organs and tissues without being detected once inhaled or ingested in the body, the handling and application of these materials with associated hazard in terms of occupational and environment risk must be identified, investigated, and documented before any of damage or vulnerability revealed. In the other words, be prepared then sorry. Many common properties and risk issues are identical or very similar between radioactive and nanoscale materials. Both are exist naturally and will persist. What is and is not a problem, must be clearly understood to support operational and protection decision making. The safety data must be provided in Internet transparently and voluntarily. All nanomaterials should consider as hazard before proofed. The

Incident factor as a learning aspect to enhance safety culture in the experimental fuel element installation of PTBN - BATAN

International Nuclear Information System (INIS)

Heri Hardiyanti; Agus Sartono; Bambang Herutomo; AS Latief

2013-01-01

The safety of a nuclear facility depends not only on the fulfillment of all technical requirements, but also on the role of non-technical aspects. The primary causation of incidents or accidents in a nuclear facility is human error which is non-technical. Therefore, in order to enhance safety, efforts from the technical aspects are as important as efforts to deal with the human factor which can be done through the application of safety culture in the facility. Incidents that took place in the Experimental Fuel Element Installation (EFEI) of PTBN - BATAN from 2011 to 2012 were caused by aging instruments and human error. In order to prevent accidents and to enhance safety, non-technical efforts that were done in the EFEI were, interalia, the obligations on all personnel to attend the pre-lab briefing, to prepare a work proposal, to compose a HIRADC (hazard identification, risk assessment, and determining control) document, to utilize self protection devices, to perform a routine maintenance, and to practice safe behavior. All personnel were involved in all those efforts. Safety is the first priority and can always be improved in the facility. A strong commitment of and cooperation between the top management and the staff are needed. (author)

Economic, safety and environmental prospects of fusion reactors

Energy Technology Data Exchange (ETDEWEB)

Conn, R W; Holdren, J P; Sharafat, S [California Univ., Los Angeles, CA (USA). Inst. of Plasma and Fusion Research; and others

1990-09-01

Controlled fusion energy is one of the long term, non-fossil energy sources available to mankind. It has the potential of significant advantages over fission nuclear power in that the consequences of severe accidents are predicted to be less and the radioactive waste burden is calculated to be smaller. Fusion can be an important ingredient in the future world energy mix as a hedge against environmental, supply or political difficulties connected with the use of fossil fuel and present-day nuclear power. Progress in fusion reactor technology and design is described for both magnetic and inertial fusion energy systems. The projected economic prospects show that fusion will be capital intensive, and the historical trend is towards greater mass utilization efficiency and more competitive costs. Recent studies emphasizing safety and environmental advantages show that the competitive potential of fusion can be further enhanced by specific choices of materials and design. The safety and environmental prospects of fusion appear to exceed substantially those of advanced fission and coal. Clearly, a significant and directed technology effort is necessary to achieve these advantages. Typical parameters have been established for magnetic fusion energy reactors, and a tokamak at moderately high magnetic field (about 7 T on axis) in the first regime of MHD stability ({beta} {le} 3.5 I/aB) is closest to present experimental achievement. Further improvements of the economic and technological performance of the tokamak are possible. In addition, alternative, non-tokamak magnetic fusion approaches may offer substantive economic and operational benefits, although at present these concepts must be projected from a less developed physics base. (Abstract Truncated)

Reactor parameters for European economic, safety and environmental studies

International Nuclear Information System (INIS)

Hancox, R.; Cooke, P.I.H.; Spears, W.R.

1990-01-01

Parameter sets for five 1200 MW e tokamak reactors were developed for the European Study Group on the Environmental, Safety-related and Economic Potential of Fusion Power, showing today's perception of the range of reactors likely to be available as a result of the Commission's fusion programme. On the basis of the cost of generating electricity, relative to a fission reactor, a reference set was chosen and endorsed by the Group for further studies including that on the environmental impact of fusion power. Key physics and technology parameters for the reference reactor are compared with values used in the ITER design, and with those from American studies. (author)

Environmental Sustainability of Gm Crops for Food Safety on Risk Society

Directory of Open Access Journals (Sweden)

Gil Ramos de Carvalho Neto

2016-10-01

Full Text Available GM crops are presented as an alternative to the erradication of hunger. The risk society, however, considering the brazilian environmental law - specially the brazilian legislation on biosafety - the food safety and nutritional law and the economic and social data on the subject, it appears that the environmental sustainability of these crops is not yet complete. Producers should adopt additional safeguards if they wish a sustainable agriculture with effective food security.

Pacific Northwest Laboratory annual report for 1982 to the DOE Office of the Assistant Secretary for Environmental Protection, Safety and Emergency Preparedness. Part 5. Environmental and occupational protection, assessment, and engineering

International Nuclear Information System (INIS)

Bair, W.J.

1983-02-01

Part 5 of the 1982 Annual Report to the Department of Energy's Office of Environmental Protection, Safety and Emergency Preparedness presents Pacific Northwest Laboratory's progress on work performed for the Office of Environmental Programs, Office of Operational Safety, and the Office of Nuclear Safety. The report is in three sections, introduced by blue divider pages, corresponding to the program elements: Technology Impacts, Environmental and Safety Engineering, Operational and Environmental Safety. In each section, articles describe progress made during FY 1982 on individual projects, as identified by the Field Task Proposal/Agreement. Authors of these articles represent a broad spectrum of capabilities derived from various segments of the Laboratory, reflecting the interdisciplinary nature of the work

International conference on the strengthening of nuclear safety in Eastern Europe. Keynote papers. Regulatory aspects of NPP safety, status of safety improvements, status of safety analysis report

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-06-01

The Objective of the Conference was to assess the past decade of nuclear safety efforts in countries operating WWER and RBMK nuclear reactors and to address remaining safety issues which require further work. A particular focus of the Conference was on international co-operation and assistance and where such efforts should be focused in the future. All Eastern European countries that operate RBMK or WWER reactors participated in the Conference, and presented papers on three key areas of nuclear safety: Regulatory Aspects of Nuclear Power Plant Safety; Status of Safety Improvements; and Status of Safety Analysis Reports. In addition, representatives from 18 additional countries that provide financial and/or technical assistance and co-operation in the area of WWER and RBMK safety offered the most extensive commentary. Key international (IAEA, World Association of Nuclear Operators, the Nuclear Energy Agency, the G-24 NUSAC, the European Commission, and the EBRD) organizations that provide nuclear safety assistance for WWER and RBMK reactors also made presentations. There is no question that considerable progress on nuclear safety has been made in Eastern Europe. Special mention should be made of successful efforts to strengthen the independence and technical competence of the nuclear regulatory authorities. Efforts should now concentrate on improving the depth and scope of the technical abilities of the regulatory authorities. More attention by governments is needed to ensure that the regulatory authorities have the financial resources and enforcement authority to fully execute their missions. In respect to the operators of the nuclear power plants, they have demonstrated clear progress in operational safety improvements. Significant additional efforts are required to maintain and enhance an effective safety culture. Design safety improvement programmes are in place in all countries. Implementation of these programmes has varied and is particularly affected by

Design for sustainable development : environmental management and safety and health

NARCIS (Netherlands)

Zwetsloot, G.; Bos, J.

1998-01-01

This is a report on the EU's environmental management and audit scheme and its interaction with the management of safety and health. The focus is on the interactions at company and at policy level. To illustrate the relevance of the interactions at company level, the Annex includes five case studies

AspectJ in action practical aspect-oriented programming

CERN Document Server

Laddad, Ramnivas

2003-01-01

A guide to aspect-oriented programming and the AspectJ language, this book provides code examples that enable quick implementation of functionality in a system. Thorough introductions to AOP and AspectJ will help developers learn or advance their knowledge of AspectJ. Examples of everyday situations in which AspectJ solutions can be applied, such as logging, policy enforcement, resource pooling, business logic, thread-safety, authentication and authorization, and transaction management are provided. In addition, design patterns and idioms are covered, as is business rule implementation. The latest technologies, such as JEES, JAAS, and log4j, are explained and connected with AspectJ.

Safety and efficacy of subretinal visual implants in humans: methodological aspects.

Science.gov (United States)

Stingl, Katarina; Bach, Michael; Bartz-Schmidt, Karl-Ulrich; Braun, Angelika; Bruckmann, Anna; Gekeler, Florian; Greppmaier, Udo; Hörtdörfer, Gernot; Kusnyerik, Akos; Peters, Tobias; Wilhelm, Barbara; Wilke, Robert; Zrenner, Eberhart

2013-01-01

Replacing the function of visual pathway neurons by electronic implants is a novel approach presently explored by various groups in basic research and clinical trials. The novelty raises unexplored methodological aspects of clinical trial design that may require adaptation and validation. We present procedures of efficacy and safety testing for subretinal visual implants in humans, as developed during our pilot trial 2005 to 2009 and multi-centre clinical trial since 2010. Planning such a trial requires appropriate inclusion and exclusion criteria. For subretinal electronic visual implants, patients with photoreceptor degeneration are the target patient group, whereas presence of additional diseases affecting clear optic media or the visual pathway must be excluded. Because sham surgery is not possible, a masked study design with implant power ON versus OFF is necessary. Prior to the efficacy testing by psychophysical tests, the implant's technical characteristics have to be controlled via electroretinography (ERG). Moreover the testing methods require adaptation to the particular technology. We recommend standardised tasks first to determine the light perception thresholds, light localisation and movement detection, followed by grating acuity and vision acuity test via Landolt C rings. A laboratory setup for assessing essential activities of daily living is presented. Subjective visual experiences with the implant in a natural environment, as well as questionnaires and psychological counselling are further important aspects. A clinical trial protocol for artificial vision in humans, which leads a patient from blindness to the state of very low vision is a challenge and cannot be defined completely prior to the study. Available tests of visual function may not be sufficiently suited for efficacy testing of artificial vision devices. A protocol based on experience with subretinal visual implants in 22 patients is presented that has been found adequate to monitor

Overview criteria for the environmental, safety and health evaluation of remedial action project planning

International Nuclear Information System (INIS)

Stenner, R.D.; Denham, D.H.

1984-10-01

Overview criteria (i.e., subject areas requiring review) for evaluating remedial action project plans with respect to environmental, safety and health issues were developed as part of a Department of Energy, Office of Operational Safety, technical support project. Nineteen elements were identified as criteria that should be addressed during the planning process of a remedial action (decontamination and decommissioning) project. The scope was interpreted broadly enough to include such environmental, safety and health issues as public image, legal obligation and quality assurance, as well as more obvious concerns such as those involving the direct protection of public and worker health. The nineteen elements are discussed along with suggested ways to use a data management software system to organize and report results

The 1988 progress report of the Nuclear Safety and Protection Institut

International Nuclear Information System (INIS)

Anon.

1988-01-01

The 1988 progress report of the Nuclear Safety and Protection Institut (CEA, France). The Institute's fields of action involve: The activities and technical safety of the nuclear power plants, the environmental and human radiation protection which includes technical, health and medical aspects, the nuclear materials compatibility and control and the accident intervention actions. The 1988 Institute activities are characterized by the continuity of the previous technical safety directives, by the improvement of the nuclear risk communication and of the international cooperation [fr

PGE Production in Southern Africa, Part II: Environmental Aspects

Directory of Open Access Journals (Sweden)

Benedikt Buchspies

2017-11-01

Full Text Available Platinum group elements (PGEs, 6E PGE = Pt + Pd + Rh + Ru + Ir + Au are used in numerous applications that seek to reduce environmental impacts of mobility and energy generation. Consequently, the future demand for PGEs is predicted to increase. Previous studies indicate that environmental impacts of PGE production change over time emphasizing the need of up-to-date data and assessments. In this context, an analysis of environmental aspects of PGE production is needed to support the environmental assessment of technologies using PGEs, to reveal environmental hotspots within the production chain and to identify optimization potential. Therefore, this paper assesses greenhouse gas (GHG emissions, cumulative fossil energy demand (CEDfossil, sulfur dioxide (SO2 emissions and water use of primary PGE production in Southern Africa, where most of today’s supply originates from. The analysis shows that in 2015, emissions amounted to 45 t CO2-eq. and 502 kg SO2 per kg 6E PGE in the case GHG and SO2 emissions, respectively. GHG emissions are dominated by emissions from electricity provision contributing more than 90% to the overall GHG emissions. The CEDfossil amounted to 0.60 TJ per kg 6E PGE. A detailed analysis of the CEDfossil reveals that electricity provision based on coal power consumes the most fossil energy carriers among all energy forms. Results show that the emissions are directly related to the electricity demand. Thus, the reduction in the electricity demand presents the major lever to reduce the consumption of fossil energy resources and the emission of GHGs and SO2. In 2015, the water withdrawal amounted to 0.272 million L per kg 6E PGE. Additionally, 0.402 million L of recycled water were used per kg 6E PGE. All assessed indicators except ore grades and production volumes reveal increasing trends in the period from 2010 to 2015. It can be concluded that difficult market conditions (see part I of this paper series and increasing

Nuclear safety in Slovak Republic. Regulatory aspects of NPP nuclear safety

International Nuclear Information System (INIS)

Lipar, M.

1999-01-01

Regulatory Authority (UJD) is appointed by the Slovak Republic National Council as an Executive Authority for nuclear safety supervision. Nuclear safety legislation, organisation and resources of UJD, its role and responsibilities are described together with its inspection and licensing functions and International cooperation concerning improvements of safety effectiveness. Achievements of UJD are listed in detail

Nuclear Safety. Technical progress journal, April--June 1996: Volume 37, No. 2

Energy Technology Data Exchange (ETDEWEB)

Muhlheim, M D [ed.

1996-01-01

This journal covers significant issues in the field of nuclear safety. Its primary scope is safety in the design, construction, operation, and decommissioning of nuclear power reactors worldwide and the research and analysis activities that promote this goal, but it also encompasses the safety aspects of the entire nuclear fuel cycle, including fuel fabrication, spent-fuel processing and handling, nuclear waste disposal, the handling of fissionable materials and radioisotopes, and the environmental effects of all these activities.

Workshop on tritium safety and environmental effects, October 15--17, 1990, Aiken, South Carolina: Session summaries

International Nuclear Information System (INIS)

Murphy, C.E. Jr.

1991-01-01

A meeting was held on October 15, 16, 17, 1990 to discuss the state of tritium safety and environmental effects. The meeting was organized with the help of the International Energy Agency planning committee consisting of K. Steinmetz, Y. Seki, G. Nardella, and G. Vivian. Representative of tritium production facilities and heavy water reactor power production were also involved. The meeting was organized to address seven topics in tritium safety that were thought to require further work. The topics were: (1) materials science, (2) environmental models, (3) environmental model validation, (4) tritiated organic compounds, (5) human dosimetry, (6) tritium sampling and measurement, and (7) long-term environmental databases

Integral Safety Assessment of Underground Storage of CO2 in Barendrecht, the Netherlands

International Nuclear Information System (INIS)

Vijgen, L.; Nitert, M.; Buijtendijk, B.; Van Dalen, A.

2009-10-01

The DCMR Environmental Protection Agency Rijnmond in the Netherlands conducted an Integral Safety Assessment of Underground Storage of CO2 in Barendrecht, the Netherlands, in cooperation with the involved safety and supervision authorities. The following aspects of the entire storage project and its safety issues have been examined: the compressor station in Pernis; the underground pipes between the compressor station and the injection locations; and the injection locations Barendrecht-Ziedewij and Barendrecht. [nl

Recent Accomplishments and Future Directions in US Fusion Safety & Environmental Program

Energy Technology Data Exchange (ETDEWEB)

David A. Petti; Brad J. Merrill; Phillip Sharpe; L. C. Cadwallader; L. El-Guebaly; S. Reyes

2006-07-01

The US fusion program has long recognized that the safety and environmental (S&E) potential of fusion can be attained by prudent materials selection, judicious design choices, and integration of safety requirements into the design of the facility. To achieve this goal, S&E research is focused on understanding the behavior of the largest sources of radioactive and hazardous materials in a fusion facility, understanding how energy sources in a fusion facility could mobilize those materials, developing integrated state of the art S&E computer codes and risk tools for safety assessment, and evaluating S&E issues associated with current fusion designs. In this paper, recent accomplishments are reviewed and future directions outlined.

Industrial Safety and Applied Health Physics Division, annual report for 1982

International Nuclear Information System (INIS)

1983-12-01

Activities during the past year are summarized for the Health Physics Department, the Environmental Management Department, and the Safety Department. The Health Physics Department conducts radiation and safety surveys, provides personnel monitoring services for both external and internal radiation, and procures, services, and calibrates appropriate portable and stationary health physics instruments. The Environmental Management Department insures that the activities of the various organizations within ORNL are carried out in a responsible and safe manner. This responsibility involves the measurement, field monitoring, and evaluation of the amounts of radionuclides and hazardous materials released to the environment and the control of hazardous materials used within ORNL. The department also collaborates in the design of ORNL Facilities to help reduce the level of materials released to the environment. The Safety Department is responsible for maintaining a high level of staff safety. This includes aspects of both operational and industrial safety and also coordinates the activities of the Director's Safety Review Committee

Industrial Safety and Applied Health Physics Division, annual report for 1982

Energy Technology Data Exchange (ETDEWEB)

1983-12-01

Activities during the past year are summarized for the Health Physics Department, the Environmental Management Department, and the Safety Department. The Health Physics Department conducts radiation and safety surveys, provides personnel monitoring services for both external and internal radiation, and procures, services, and calibrates appropriate portable and stationary health physics instruments. The Environmental Management Department insures that the activities of the various organizations within ORNL are carried out in a responsible and safe manner. This responsibility involves the measurement, field monitoring, and evaluation of the amounts of radionuclides and hazardous materials released to the environment and the control of hazardous materials used within ORNL. The department also collaborates in the design of ORNL Facilities to help reduce the level of materials released to the environment. The Safety Department is responsible for maintaining a high level of staff safety. This includes aspects of both operational and industrial safety and also coordinates the activities of the Director's Safety Review Committee. (ACR)

Environmental problems related to winter traffic safety conditions

OpenAIRE

Hääl, Maire-Liis; Sürje, Peep

2006-01-01

The changeable Nordic climate has added problems to road maintenance and the environment to ensure traffic safety under winter conditions. The widespread use of salt (NaCl) for snow and ice removal from roads has resulted in environmental impacts in many areas. Some of the problems associated with the use of NaCl are the corrosion of bridges, road surfaces and vehicles and damage to roadside vegetation and aquatic system that are affected by water from de-iced roads. Accumulation of hard meta...

The 2002 Drigg post-closure safety case: implementation of a multiple factor safety case

International Nuclear Information System (INIS)

Lean, C.B.; Grimwood, P.D.; Watts, L.; Fowler, L.; Thomson, G.; Kelly, E.; Hodgkinson, D.

2004-01-01

British Nuclear Fuels plc (BNFL) owns and operates the Drigg disposal site, which is the UK's principal facility for the disposal of low level radioactive waste (LLW). Disposals are carried out under the terms of an authorization granted by the UK Environment Agency (the Agency). The Agency periodically reviews the authorization to take account of new information and any revisions to regulatory requirements. In September 2002 new Operational Environmental and Post-Closure Safety Cases (OESC and PCSC respectively) were submitted to the Agency to support the next authorization review. The OESC assesses radiological safety aspects up until closure of the site, including a post-operational management phase, whilst the PCSC considers the longer-term radiological safety. The Drigg disposal facility has been operational since 1959. For the first 3 decades of operations, disposals were solely by tumble tipping wastes into excavated trenches. This was phased out in favour of vault disposal and disposals to the trenches were completed in 1995. The first vault (Vault 8) commenced operations in 1988 and construction of future vaults is planned up to the estimated end of disposal operations in about 50 years time. This paper describes the main components of the 2002 Drigg PCSC and how they relate to each other. Central to the safety case is a systematic comprehensive post-closure radiological safety assessment (PCRSA). However, the importance of the more qualitative aspects of the safety case, including a demonstration of optimisation, is also highlighted. In addition, other confidence-building activities which are key to developing and presenting the safety case are discussed. (author)

Load Management in Residential Buildings Considering Techno-Economic and Environmental Aspects

Energy Technology Data Exchange (ETDEWEB)

Abaravicius, Juozas

2004-12-01

Load problems in electricity markets occur both on the supply and demand side and can have technical, economic and even political causes. Commonly, such problems have been solved by expanding production and/or distribution capacity, importing electricity or by load management. Load management is a techno-economic measure for harmonizing the relations between supply and demand sides, optimizing power generation and transmission and increasing security of supply. Interest in load management differs depending on the perspective of the actors involved: from customer, utility, or producer to state policy maker. The problem of load demand and load management in residential sector is in this thesis approached from different perspectives, i.e. technical, economic, and environmental. The study does not go deep into detailed analyses of each perspective, but rather aims to establish and analyze the links between them. This trans-disciplinary approach is the key methodological moment used in the research work performed by the research group for load management in buildings at the Lund Institute of Technology. The key objective of this study is to analyze load demand variation and load management possibilities in residential sector, particularly detached and semi-detached houses, to experimentally test and analyze the conditions and potential of direct load management from customer and utility viewpoint. Techno-economic and environmental aspects are investigated. The study was performed in collaboration with one electric utility in Southern Sweden. Ten electric-heated houses were equipped with extra meters, enabling hourly load measurements for heating, hot water and total electricity use. Household heating and hot water systems were controlled by the utility using an existing remote reading and monitoring system. The residents noticed some of the control periods, although they didn't express any larger discomfort. The experiments proved that direct load management might

The Environmental Health/Home Safety Education Project: a successful and practical U.S.-Mexico border initiative.

Science.gov (United States)

Forster-Cox, Susan C; Mangadu, Thenral; Jacquez, Benjamín; Fullerton, Lynne

2010-05-01

The Environmental Health/Home Safety Education Project (Proyecto de Salud Ambiental y Seguridad en el Hogar) has been developed in response to a wide array of severe and often preventable environmental health issues occurring in and around homes on the U.S.-Mexico border. Utilizing well-trained community members, called promotoras , homes are visited and assessed for potential environmental hazards, including home fire and food safety issues. Data analyzed from project years 2002 to 2005 shows a significant impact in knowledge levels and initial behavior change among targeted participants as it relates to fire and food safety issues. Since the initiation of the project in 1999, hundreds of participants have improved their quality of life by making their homes safer. The project has proven to be sustainable, replicable, flexible, and attractive to funders.

Safety in decommissioning of research reactors

International Nuclear Information System (INIS)

1986-01-01

This Guide covers the technical and administrative considerations relevant to the nuclear aspects of safety in the decommissioning of reactors, as they apply to the reactor and the reactor site. While the treatment, transport and disposal of radioactive wastes arising from decommissioning are important considerations, these aspects are not specifically covered in this Guide. Likewise, other possible issues in decommissioning (e.g. land use and other environmental issues, industrial safety, financial assurance) which are not directly related to radiological safety are also not considered. Generally, decommissioning will be undertaken after planned final shutdown of the reactor. In some cases a reactor may have to be decommissioned following an unplanned or unexpected event of a series or damaging nature occurring during operation. In these cases special procedures for decommissioning may need to be developed, peculiar to the particular circumstances. This Guide could be used as a basis for the development of these procedures although specific consideration of the circumstances which create the need for them is beyond its scope

Safety Aspects of Sustainable Storage Dams and Earthquake Safety of Existing Dams

Directory of Open Access Journals (Sweden)

Martin Wieland

2016-09-01

Full Text Available The basic element in any sustainable dam project is safety, which includes the following safety elements: ① structural safety, ② dam safety monitoring, ③ operational safety and maintenance, and ④ emergency planning. Long-term safety primarily includes the analysis of all hazards affecting the project; that is, hazards from the natural environment, hazards from the man-made environment, and project-specific and site-specific hazards. The special features of the seismic safety of dams are discussed. Large dams were the first structures to be systematically designed against earthquakes, starting in the 1930s. However, the seismic safety of older dams is unknown, as most were designed using seismic design criteria and methods of dynamic analysis that are considered obsolete today. Therefore, we need to reevaluate the seismic safety of existing dams based on current state-of-the-art practices and rehabilitate deficient dams. For large dams, a site-specific seismic hazard analysis is usually recommended. Today, large dams and the safety-relevant elements used for controlling the reservoir after a strong earthquake must be able to withstand the ground motions of a safety evaluation earthquake. The ground motion parameters can be determined either by a probabilistic or a deterministic seismic hazard analysis. During strong earthquakes, inelastic deformations may occur in a dam; therefore, the seismic analysis has to be carried out in the time domain. Furthermore, earthquakes create multiple seismic hazards for dams such as ground shaking, fault movements, mass movements, and others. The ground motions needed by the dam engineer are not real earthquake ground motions but models of the ground motion, which allow the safe design of dams. It must also be kept in mind that dam safety evaluations must be carried out several times during the long life of large storage dams. These features are discussed in this paper.

Nuclear safety. Technical progress journal, January--March 1996: Volume 37, No. 1

Energy Technology Data Exchange (ETDEWEB)

Muhlheim, M D [ed.

1996-01-01

Nuclear Safety is a journal that covers significant issues in the field of nuclear safety. Its primary scope is safety in the design, construction, operation, and decommissioning of nuclear power reactors worldwide and the research and analysis activities that promote this goal, but is also encompasses the safety aspects of the entire nuclear fuel cycle, including fuel fabrication, spent-fuel processing and handling, and nuclear waste disposal, the handling of fissionable materials and radioisotopes, and the environmental effects of all these activities. Individual articles are indexed separately for the data base.

Proceedings of the International conference on radioecology and environmental radioactivity

International Nuclear Information System (INIS)

2008-01-01

The conference contains 404 presentations on: 1) Emergency preparedness and rehabilitation with emphasis on radiation and radioactivity determination and monitoring, protection and contamination and pollution. 2) TNORM/NORM including radon with focus on radioactivity in the environmental and isotope evaluation. 3) Radioecology and speciation including arctic radioecology, focusing on accidents, radiation and radioactivity effects, nuclear waste disposal, handling, impacts, safety and risks, pollution and its sources, accumulation of isotopes and various medical aspects. 4) Risk assessment with emphasis on the environmental and ecological aspects, modeling, recommendations and international cooperation and discussion of the effects of climatic changes. 5) Radiation in society. 6) Environmental protection with focus on radionuclide studies, radiation effects and protection measures, isotope accumulation effects, nuclide distribution, migration and pollution and effects and handling of nuclear accidents. The global aspects of the topics are evident and there are discussions on non-ionizing and ionizing radiation effect, various simulation problems and public and general health aspects (tk)

Safety campaigns. TIS Launches New Safety Information Campaign

CERN Multimedia

2001-01-01

Need to start a new installation and worried about safety aspects? Or are you newly responsible for safety matters in a CERN building? Perhaps you're simply interested in how to make the working environment safer for yourself and your colleagues. Whatever the case, a new information campaign launched by TIS this week can help. The most visible aspects of the new campaign will be posters distributed around the Laboratory treating a different subject each month. The Web site - http://safety.cern.ch/ - which provides all safety related information. But these are not the only aspects of the new campaign. Members of the TIS/GS group, whose contact details can be found on the safety web site, are available to give information and advice on a one-to-one basis at any time. The campaign's launch has been timed to coincide with European Safety Week, organized by the European Agency for Safety and Health at Work and the subject treated in the first posters is safety inspection. This particular topic only concerns thos...

Extended occupant safety through virtual testing: objectives of the European project VITES

NARCIS (Netherlands)

Hoof, J.F.A.M. van; Happee, R.; Baldauf, H.; Puppini, R.; Oakley, C.

2001-01-01

Increasingly stringent international passenger safety norms and the need to reduce vehicle body weight for environmental and protection requirements demand efficient and innovative design methods. Computer simulation, or virtual testing, allows an integrated evaluation of these aspects in the early

Environmental management systems: An industry viewpoint

International Nuclear Information System (INIS)

Ottenbreit, R.

1993-01-01

Imperial Oil is upgrading systems used to ensure protection of health and safety and to facilitate the internalization and integration of environmental considerations into its business. Work in progress related to this upgrading is reported. The upgrading was undertaken partly in response to increased expectations from stakeholders and from the notion that improvement of the environmental, health, and safety (EH ampersand S) aspects of business can have the effect of improving reliability, lowering expenses, and minimizing liabilities. The responsibility for establishing environmental policy and direction as well as the environmental management framework rests with Imperial Oil's management committee and the EH ampersand S committee of the board of directors. Responsibility and accountability for implementation and sustainment of environmental processes and systems resides with line management. One of the management systems, the Operations Integrity Management Framework, is described. Elements of this framework include management leadership, accountability, and commitment; risk assessment and management; management of change; personnel and training; incident investigation and analysis; and facilities design and construction. 2 figs

Regulatory aspects of underground disposal of radioactive waste - Danish notes

International Nuclear Information System (INIS)

Anon.

1978-01-01

In Denmark, provisions regulating nuclear installations (their licensing, and the disposal of radioactive waste amongst other matters) are contained in an Act of 12 May 1976. This act, however, will only come into force if Denmark decides to implement a nuclear power programme. Under the provisions of this Act, the Minister of the Environment is the licensing authority. He receives recommendations from various bodies, including the Inspectorate of Nuclear Installations, and may impose any conditions thought necessary. Three permits are required - site approval, construction permit, and operation permit - and applications must be accompanied by documentation relevant to environmental and nuclear safety and health aspects. Operation of a nuclear installation may be suspended in cases of urgency. As yet, no detailed safety regulations or guidelines on the disposal of nuclear waste have been issued, but a working party, established by the Environmental Protection Agency, is currently studying the problem. (NEA) [fr

Nuclear and non-nuclear safety aspects in nuclear facilities dismantling. The example of a PWR pilot decommissioning project

International Nuclear Information System (INIS)

Massaut, V.; Deboodt, P.; Dadoumont, J.; Valenduc, P.; Denissen, L.

2002-01-01

The dismantling of nuclear facilities, and in particular of nuclear power plants, involves new challenges for the nuclear industry. Although the dismantling of various activated and contaminated components is nowadays considered as almost industrial practice, the safety aspects of decommissioning bring some specific features which are not always taken into account in the operation of the plants. Moreover, most of the plants and facilities currently decommissioned are rather old and were never foreseen to be decommissioned. The operations involved in dismantling and decontamination, often imply new or unforeseen situations. On the nuclear, or radiological side, the radioprotection optimisation of the operations involved often requires to model the environment and to analyse different scenarios to tackle the operation. Recent 3-D software (like the Visiplan software) allowing representation of the actual environment and the influence of the various sources present, is really needed to be able to minimise the radiological impact on the operators. The risk of contamination spread, by opening loops and components or by the dismantling process itself, is also an important aspect of the radiological protection study. Nevertheless, the radiological aspects of the safety approach are not the only ones to be dealt with when decommissioning nuclear facilities. Indeed, classical industrial safety aspects are also important: the dismantling can bring handling and transporting risk (heavy loads, difficult ways, uneasy access, etc.) but also the handling of toxic or hazardous materials. For instance, the removal of asbestos in contaminated areas can lead to additional hazard; the presence of alkali metals (like Na or NaK), of toxic metals (like e.g. Beryllium) or of corrosive fluids (acid,...) have to be tackled often in unstructured environment, and sometimes with limited knowledge of the actual situation. This leads to approach the operations following the ASARA principle (As

Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia

Energy Technology Data Exchange (ETDEWEB)

Jayed, M.H.; Masjuki, H.H.; Saidur, R.; Kalam, M.A.; Jahirul, M.I. [Department of Mechanical Engineering, University of Malaya, 50603 Kuala Lumpur (Malaysia)

2009-12-15

Research on alternative fuel for the vehemently growing number of automotivesis intensified due to environmental reasons rather than turmoil in energy price and supply. From the policy and steps to emphasis the use of biofuel by governments all around the world, this can be comprehended that biofuel have placed itself as a number one substitute for fossil fuels. These phenomena made Southeast Asia a prominent exporter of biodiesel. But thrust in biodiesel production from oilseeds of palm and Jatropha curcas in Malaysia, Indonesia and Thailand is seriously threatening environmental harmony. This paper focuses on this critical issue of biodiesels environmental impacts, policy, standardization of this region as well as on the emission of biodiesel in automotive uses. To draw a bottom line on feasibilities of different feedstock of biodiesel, a critical analysis on oilseed yield rate, land use, engine emissions and oxidation stability is reviewed. Palm oil based biodiesel is clearly ahead in all these aspects of feasibility, except in the case of NO{sub x} where it lags from conventional petro diesel. (author)

Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia

International Nuclear Information System (INIS)

Jayed, M.H.; Masjuki, H.H.; Saidur, R.; Kalam, M.A.; Jahirul, M.I.

2009-01-01

Research on alternative fuel for the vehemently growing number of automotivesis intensified due to environmental reasons rather than turmoil in energy price and supply. From the policy and steps to emphasis the use of biofuel by governments all around the world, this can be comprehended that biofuel have placed itself as a number one substitute for fossil fuels. These phenomena made Southeast Asia a prominent exporter of biodiesel. But thrust in biodiesel production from oilseeds of palm and Jatropha curcas in Malaysia, Indonesia and Thailand is seriously threatening environmental harmony. This paper focuses on this critical issue of biodiesels environmental impacts, policy, standardization of this region as well as on the emission of biodiesel in automotive uses. To draw a bottom line on feasibilities of different feedstock of biodiesel, a critical analysis on oilseed yield rate, land use, engine emissions and oxidation stability is reviewed. Palm oil based biodiesel is clearly ahead in all these aspects of feasibility, except in the case of NO x where it lags from conventional petro diesel. (author)

Nuclear safety, environmental and community impacts of uranium mining - Canada

International Nuclear Information System (INIS)

Scissons, Kevin H.

2009-01-01

The Canadian Nuclear Safety Commission (CNSC) is mandated under the Nuclear Safety and Control Act (NSCA, the CNSC's mandate is set out in Section 9 of the Nuclear Safety and Control Act.) for regulating all nuclear facilities and nuclear-related activities in Canada. Before any person or company can prepare a site, construct, operate, decommission or abandon a nuclear facility, or possess, use, transport or store nuclear substances, they must obtain a licence issued by the CNSC. This paper provides an overview of the licensing of uranium mines and mills in Canada, taking into consideration the requirements of the NSCA and associated regulations concerning the environment, the people and the communities we protect. Describing the role of the CNSC and our regulatory framework will form a key foundation to this paper. This paper will also explain the different licensing phases and their focus for uranium mines and mills. It will conclude with an overview of our community involvement (social, public aspects) and our joint regulatory approach for defence in depth. (orig.)

Nuclear Safety. Technical Progress Journal, January--March 1993: Volume 34, No. 1

Energy Technology Data Exchange (ETDEWEB)

None

1993-01-01

This review journal covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

Nuclear Safety. Technical Progress Journal, October--December 1992: Volume 33, No. 4

Energy Technology Data Exchange (ETDEWEB)

None

1992-01-01

This review journal covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

Nuclear Safety. Technical progress journal, January--March 1994: Volume 35, No. 1

Energy Technology Data Exchange (ETDEWEB)

Silver, E G [ed.

1994-01-01

This is a journal that covers significant issues in the field of nuclear safety. Its primary scope is safety in the design, construction, operation, and decommissioning of nuclear power reactors worldwide and the research and analysis activities that promote this goal, but it also encompasses the safety aspects of the entire nuclear fuel cycle, including fuel fabrication, spent-fuel processing and handling, and nuclear waste disposal, the handling of fissionable materials and radioisotopes, and the environmental effects of all these activities.

Nuclear Safety. Technical progress journal, April--June 1992: Volume 33, No.2

Energy Technology Data Exchange (ETDEWEB)

Silver, E G [ed.

1992-01-01

This review journal covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

Nuclear Safety. Technical Progress Journal, January--March 1992: Volume 33, No. 1

Energy Technology Data Exchange (ETDEWEB)

None

1992-01-01

This review journal covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

Nuclear Safety. Technical Progress Journal, April--June 1993: Volume 34, No. 2

Energy Technology Data Exchange (ETDEWEB)

Silver, E G [ed.

1993-01-01

This review journal that covers significant developments in the field of Nuclear Safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations are also treated.

Nuclear Safety. Technical Progress Journal, July--September 1992: Volume 33, No. 3

Energy Technology Data Exchange (ETDEWEB)

None

1992-01-01

This review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

West Valley UF6 Facility. Environmental report and safety evaluation, supplement 1

International Nuclear Information System (INIS)

1975-01-01

Revised pages are provided for the Environmental Report and the Safety Evaluation Report which reflect design changes and more detailed information on the items requested in the USAEC letter to NFS dated September 6, 1974

Uranium mining and milling environmental studies. (Latest citations from the EI Compendex plus database). Published Search

International Nuclear Information System (INIS)

1993-08-01

The bibliography contains citations concerning environmental and social aspects of uranium mining, milling and ore treatment. Environmental and social aspects include air and water pollution, public health, occupational safety, land reclamation, and waste disposal. The citations refer to monitoring and control of contaminants, and environmental surveys and impact statements for specific areas in the vicinity of mining and ore treatment facilities. There are also references to health studies performed on miners and millworkers. (Contains 250 citations and includes a subject term index and title list.)

Study of fundamental safety-related aspects in connection with the decommissioning of nuclear installations. Pt. 2. Safety considerations and emissions

International Nuclear Information System (INIS)

John, T.; Thierfeldt, S.

1993-01-01

The procedures used so far for the examination of selected decommissioning projects in expert opinions on safety, in particular of nuclear power plants, were screened, with special emphasis on the examination of safety considerations, i.e. analysis of possible accidents. Generic examinations on safety in connection with the decommissioning of nuclear installations were used to assess safety considerations. Different approaches were taken with regard to the selection of analysed accidents and determination of parameters defining activity release and assumptions in safety opinions. Therefore it seems to be appropriate to establish a scenario to be used for nuclear power plant accident analyses, which covers the range of radiologically relevant accidents during decommissioning activities. Although it might be controversially discussed, because of specific plant designs (test and prototype reactors as well as first power reactors), to establish such a radiologically covering accident scenario for older nuclear power plants, it seems to be no problem for modern light water reactors. The radiologically most relevant possible accident in a decommissioned nuclear power plant is fire in the plant. Parameter values and assumptions are suggested which determine the source term in the event of a fire in the plant. Inspite of a conservative determination of parameter values and assumptions, an environmental dose commitment of less than 50 mSv is to be expected for the resulting source term. (orig.) [de

Radiological and environmental safety in front-end fuel cycle facilities

International Nuclear Information System (INIS)

Puranik, V.D.

2011-01-01

The front end nuclear fuel cycle comprises of mining and processing of beach mineral sands along the southern coast of Kerala, Tamilnadu and Orissa, mining and processing of uranium ore in Singhbhum-East in Jharkhand and refining and fuel fabrication at Hyderabad. The Health Physics Units (HPUs)/Environmental Survey Laboratories (ESLs) set up at each site from inception of operation to carry out regular in-plant, personnel monitoring and environmental surveillance to ensure safe working conditions, evaluate radiation exposure of workers, ensure compliance with statutory norms, help in keeping the environmental releases well within the limits and advise appropriate control measures. This paper describes the occupational and environmental radiological safety measures associated with the operations of front end of nuclear fuel cycle. Radiological monitoring in these facilities is important to ensure safe working environment, protection of workers against exposure to radiation and comply with regulatory limits of exposure. The radiation exposure of workers in different units of the front end nuclear fuels cycle facilities operated by IREL, UCIL and NFC and environmental monitoring results are summarised in this paper

Idaho National Engineering Laboratory (INEL) Environmental Restoration (ER) Program Baseline Safety Analysis File (BSAF)

International Nuclear Information System (INIS)

1995-09-01

The Baseline Safety Analysis File (BSAF) is a facility safety reference document for the Idaho National Engineering Laboratory (INEL) environmental restoration activities. The BSAF contains information and guidance for safety analysis documentation required by the U.S. Department of Energy (DOE) for environmental restoration (ER) activities, including: Characterization of potentially contaminated sites. Remedial investigations to identify and remedial actions to clean up existing and potential releases from inactive waste sites Decontamination and dismantlement of surplus facilities. The information is INEL-specific and is in the format required by DOE-EM-STD-3009-94, Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports. An author of safety analysis documentation need only write information concerning that activity and refer to BSAF for further information or copy applicable chapters and sections. The information and guidance provided are suitable for: sm-bullet Nuclear facilities (DOE Order 5480-23, Nuclear Safety Analysis Reports) with hazards that meet the Category 3 threshold (DOE-STD-1027-92, Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports) sm-bullet Radiological facilities (DOE-EM-STD-5502-94, Hazard Baseline Documentation) Nonnuclear facilities (DOE-EM-STD-5502-94) that are classified as open-quotes lowclose quotes hazard facilities (DOE Order 5481.1B, Safety Analysis and Review System). Additionally, the BSAF could be used as an information source for Health and Safety Plans and for Safety Analysis Reports (SARs) for nuclear facilities with hazards equal to or greater than the Category 2 thresholds, or for nonnuclear facilities with open-quotes moderateclose quotes or open-quotes highclose quotes hazard classifications

Idaho National Engineering Laboratory (INEL) Environmental Restoration (ER) Program Baseline Safety Analysis File (BSAF)

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

The Baseline Safety Analysis File (BSAF) is a facility safety reference document for the Idaho National Engineering Laboratory (INEL) environmental restoration activities. The BSAF contains information and guidance for safety analysis documentation required by the U.S. Department of Energy (DOE) for environmental restoration (ER) activities, including: Characterization of potentially contaminated sites. Remedial investigations to identify and remedial actions to clean up existing and potential releases from inactive waste sites Decontamination and dismantlement of surplus facilities. The information is INEL-specific and is in the format required by DOE-EM-STD-3009-94, Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports. An author of safety analysis documentation need only write information concerning that activity and refer to BSAF for further information or copy applicable chapters and sections. The information and guidance provided are suitable for: {sm_bullet} Nuclear facilities (DOE Order 5480-23, Nuclear Safety Analysis Reports) with hazards that meet the Category 3 threshold (DOE-STD-1027-92, Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports) {sm_bullet} Radiological facilities (DOE-EM-STD-5502-94, Hazard Baseline Documentation) Nonnuclear facilities (DOE-EM-STD-5502-94) that are classified as {open_quotes}low{close_quotes} hazard facilities (DOE Order 5481.1B, Safety Analysis and Review System). Additionally, the BSAF could be used as an information source for Health and Safety Plans and for Safety Analysis Reports (SARs) for nuclear facilities with hazards equal to or greater than the Category 2 thresholds, or for nonnuclear facilities with {open_quotes}moderate{close_quotes} or {open_quotes}high{close_quotes} hazard classifications.

Public opinion confronted by the safety problems associated with different energy source

Energy Technology Data Exchange (ETDEWEB)

Otway, H J; Thomas, K

1978-09-01

Model study of public opinion 'for' and 'against' the various energy sources - oil, coal, solar and nuclear power. Attitudes are examined from four aspects: psychology - economic advantages, sociopolitical problems, environmental problems and safety. The investigation focuses on nuclear energy. (13 refs.) (In French)

Environmental supports for walking/biking and traffic safety: income and ethnicity disparities.

Science.gov (United States)

Yu, Chia-Yuan

2014-10-01

The present study investigates the influence of income, ethnicity, and built environmental characteristics on the percentages of workers who walk/bike as well as on pedestrian/cyclist crash rates. Furthermore, income and ethnicity disparities are also explored. This study chose 162 census tracts in Austin as the unit of analysis. To explore income and ethnicity differences in built environments, this study examined the associations of the poverty rate, the percentage of white population, and the percentage of Hispanic population to each built environmental variable. Path models were applied to examine environmental supports of walking/biking and pedestrian/cyclist safety. Areas with high poverty rates had more biking trips and experienced more cyclist crashes, while areas with a high percentage of white population generated more walking trips and fewer pedestrian crashes. Sidewalk completeness and mixed land uses promoted walking to work but increased the crash risk for pedestrians as well. In terms of biking behaviors, road density and transit stop density both increased biking trips and cyclist crashes. Environmental designs that both encourage walking/biking trips and generate more safety threats should attract more attention from policy makers. Policies should also be more devoted to enhancing the mobility and health for areas with high poverty rates. Copyright © 2014 Elsevier Inc. All rights reserved.

Health and safety plan for the Environmental Restoration Program at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Clark, C. Jr.; Burman, S.N.; Cipriano, D.J. Jr.; Uziel, M.S.; Kleinhans, K.R.; Tiner, P.F.

1994-08-01

This Programmatic Health and Safety plan (PHASP) is prepared for the U.S. Department of Energy (DOE) Oak Ridge National Laboratory (ORNL) Environmental Restoration (ER) Program. This plan follows the format recommended by the U.S. Environmental Protection Agency (EPA) for remedial investigations and feasibility studies and that recommended by the EM40 Health and Safety Plan (HASP) Guidelines (DOE February 1994). This plan complies with the Occupational Safety and Health Administration (OSHA) requirements found in 29 CFR 1910.120 and EM-40 guidelines for any activities dealing with hazardous waste operations and emergency response efforts and with OSHA requirements found in 29 CFR 1926.65. The policies and procedures in this plan apply to all Environmental Restoration sites and activities including employees of Energy Systems, subcontractors, and prime contractors performing work for the DOE ORNL ER Program. The provisions of this plan are to be carried out whenever activities are initiated that could be a threat to human health or the environment. This plan implements a policy and establishes criteria for the development of procedures for day-to-day operations to prevent or minimize any adverse impact to the environment and personnel safety and health and to meet standards that define acceptable management of hazardous and radioactive materials and wastes. The plan is written to utilize past experience and best management practices to minimize hazards to human health and safety and to the environment from event such as fires, explosions, falls, mechanical hazards, or any unplanned release of hazardous or radioactive materials to air, soil, or surface water

Health and safety plan for the Environmental Restoration Program at Oak Ridge National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Clark, C. Jr.; Burman, S.N.; Cipriano, D.J. Jr.; Uziel, M.S.; Kleinhans, K.R.; Tiner, P.F.

1994-08-01

This Programmatic Health and Safety plan (PHASP) is prepared for the U.S. Department of Energy (DOE) Oak Ridge National Laboratory (ORNL) Environmental Restoration (ER) Program. This plan follows the format recommended by the U.S. Environmental Protection Agency (EPA) for remedial investigations and feasibility studies and that recommended by the EM40 Health and Safety Plan (HASP) Guidelines (DOE February 1994). This plan complies with the Occupational Safety and Health Administration (OSHA) requirements found in 29 CFR 1910.120 and EM-40 guidelines for any activities dealing with hazardous waste operations and emergency response efforts and with OSHA requirements found in 29 CFR 1926.65. The policies and procedures in this plan apply to all Environmental Restoration sites and activities including employees of Energy Systems, subcontractors, and prime contractors performing work for the DOE ORNL ER Program. The provisions of this plan are to be carried out whenever activities are initiated that could be a threat to human health or the environment. This plan implements a policy and establishes criteria for the development of procedures for day-to-day operations to prevent or minimize any adverse impact to the environment and personnel safety and health and to meet standards that define acceptable management of hazardous and radioactive materials and wastes. The plan is written to utilize past experience and best management practices to minimize hazards to human health and safety and to the environment from event such as fires, explosions, falls, mechanical hazards, or any unplanned release of hazardous or radioactive materials to air, soil, or surface water.

Safety and environmental advantages of breeding blanketless fusion reactors

International Nuclear Information System (INIS)

Zucchetti, M.; Merola, M.; Matera, R.

1994-01-01

Next-step reactors will use DT cycle. However, environmental advantage will be the main chance for fusion to compete with other energy sources. The environmental problems of DT cycle due to tritium and neutron activation, are examined. Fusion commercial reactors could be based on alternative fuel cycles like D-He3. Advantages and disadvantages of this fuel cycle are outlined. All the technologies related with the self-breeding of tritium and the concept of breeding blanket itself may be not reactor relevant. In the frame of the Next-step studies, the potential advantages of intermediate DT devices without breeding blanket are discussed. Simplified design, lower cost, higher safety are the main ones. The problem of the source of tritium is examined. (author)

Developing a generic environmental safety case

International Nuclear Information System (INIS)

Bailey, Lucy

2014-01-01

The Nuclear Decommissioning Authority (NDA) has been charged with implementing the United Kingdom government's policy for the long-term management of higher activity radioactive waste by planning, building and operating a geological disposal facility (GDF). Within the NDA, we - the Radioactive Waste Management Directorate (RWMD) - are tasked with the development of a GDF. The UK government has also decided that a process of voluntarism and partnership will be followed to identify a suitable site for the GDF. To date there is no volunteer community and the site selection process to find a volunteer host community is under review. RWMD has an ongoing role to provide advice to UK radioactive waste producers on the conditioning and packaging of wastes and to undertake disposability assessments of waste packaging proposals to determine their suitability for eventual disposal in a GDF. We also need to demonstrate our confidence that a GDF would be safe. Therefore RWMD has published a generic Environmental Safety Case (ESC) (NDA, 2010) to demonstrate that we are confident that a GDF could be developed to meet the guidelines set down by the environmental regulators (EA/NIEA, 2009) in a range of geological settings. The ESC includes reference case calculations that are used as a benchmark for disposability assessments. (author)

The School Assessment for Environmental Typology (SAfETy): An Observational Measure of the School Environment.

Science.gov (United States)

Bradshaw, Catherine P; Milam, Adam J; Furr-Holden, C Debra M; Johnson, Sarah Lindstrom

2015-12-01

School safety is of great concern for prevention researchers, school officials, parents, and students, yet there are a dearth of assessments that have operationalized school safety from an organizational framework using objective tools and measures. Such a tool would be important for deriving unbiased assessments of the school environment, which in turn could be used as an evaluative tool for school violence prevention efforts. The current paper presents a framework for conceptualizing school safety consistent with Crime Prevention through Environmental Design (CPTED) model and social disorganization theory, both of which highlight the importance of context as a driver for adolescents' risk for involvement in substance use and violence. This paper describes the development of a novel observational measure, called the School Assessment for Environmental Typology (SAfETy), which applies CPTED and social disorganizational frameworks to schools to measure eight indicators of school physical and social environment (i.e., disorder, trash, graffiti/vandalism, appearance, illumination, surveillance, ownership, and positive behavioral expectations). Drawing upon data from 58 high schools, we provide preliminary data regarding the validity and reliability of the SAfETy and describe patterns of the school safety indicators. Findings demonstrate the reliability and validity of the SAfETy and are discussed with regard to the prevention of violence in schools.

Radiological and the other safety aspects in the operation of electron beam facility

International Nuclear Information System (INIS)

Loterina, Roel Alamares

2003-01-01

The radiological safety aspects of the operation of an electron beam facility in general and the 3 MeV ALURTRON electron beam facility of the Malaysian Institute of Nuclear Technology Research (MINT) in particular were reviewed and evaluated. Evaluation was made based on existing records as well as actual monitoring around facility. Area monitoring results using TLDs are within permissible levels. The maximum reading of 7.29 mSv measured in year 2000 is very low as compared to the annual dose limit of 50 mSv/year. In general, the shielding for the installation is adequate and no significant radiation leakage were detected based on radiation survey results. However, measured radiation levels with a maximum of 1.9 mSv/h at the sampling ports easily exceed the limit of 25μSv/h. The facility is equipped with safety features, such as interlocked system, adequate shielding, engineered safety design of irradiation and accelerator rooms, and accessories such as conveyor system and product handling system. Warning lights and signals are adequately installed around the facility. Other identified hazards that may affect the operator, workers, and personnel were also evaluated based on previous records of monitoring. The ozone concentration levels with a maximum reading of 0.05 ppm measured in the environment of the facility are within the threshold limit value of 0.1 ppm. The measured noise levels at all locations around facility are generally below the maximum permissible level of 80dB. The ALURTRON has achieved a minimum safety requirement to warrant its full operation without relying on administrative controls and procedures to ensure safety in operation. (Auth.)

Aspects of nuclear reactor safety

International Nuclear Information System (INIS)

Hardt, P. von der; Rottger, H.

1980-01-01

The Colloquium on 'Irradiation Tests for Reactor Safety Programmes' has been organised by JRC Petten in order to determine the present state of technology in the field. The role of research and test reactors for studies of structural material and fuel elements under transient and off-normal conditions was to be explained. The Colloquium has been attended by 110 participants from outside and inside Europe. 27 papers were presented covering the major ongoing projects in Japan, the United States, and in Europe, and elaborating in particular: - design rationale and layout of safety irradiation experiments; - design, manufacture, and performance of irradiation equipment with particular attention to generation and control of transient conditions, fast response in-pile instrumentation and its out-of-pile data retrieval; - post-irradiation evaluation; - results and analytical support

Public administration of processes for supporting of inner ecology safety in Ukraine: organizational and legal aspect

Directory of Open Access Journals (Sweden)

Y. О. Romanenko

2016-03-01

Full Text Available The paper studied the legal framework that regulates social relations in the field of internal environmental safety and provides a unified state policy and the exercise of powers by the authorities at all levels. Thus, in the legal field there are the gaps on many issues that are important in solving the tasks, including the powers and responsibilities of the various subjects of law in an extreme situation, as well as management and leadership of emergency rescue activity and other urgent works in disaster areas. It is established that to increase the state’s role in protecting the population from emergency situations of natural character, it is necessary to achieve a qualitative change in the legal status of government, the formation of relevant legislation and conduct regulation. In general, the process of regulation in addressing the problems of population protection from emergency situations of different nature must be carry out through the systematization of the national, regional and local levels regulations that are relevant to the issues of prevention and liquidation of emergency situations; also we must eliminate inconsistencies in current legislation and coordinate the national legislation with international. Based on analysis of existing and unresolved problems of internal environmental safety it is necessity to implement new mechanisms of state influence to prevent environmental degradation, the use of methods and means of protecting the population from current anthropogenic influences; reorganization of the territory, defining the boundaries of zones of sanitary, medical and sanitary survey of the population; ensuring internal environmental safety is realized with the help of legal, operational and rescue, functional and territorial public administration practices; the use of multi-state management controls that are able to simultaneously influence the situation in the sphere of nature.

Practical aspects of the environmental behavior of mercury

International Nuclear Information System (INIS)

Bittel, Robert; Patti, Francois.

1976-12-01

Mercury is to be found in the natural environment; yet at very low concentrations it can be toxic for living beings, especially higher animals and man. Its behavior in the physical environment and food chains is highly different according as alkyl compounds are to be found or not. The changes between the various chemical forms of mercury under the dependence of environmental conditions - and especially microbiological life - make it difficult to appreciate the hazards resulting from mercury releases. In spite of the many basic investigations, and on account of the difficulties stated above, the practical aspects of mercury transfers from the production source to man show a number of gaps, except for marine chains. Anyhow, the chief transfers of mercury seem to be: direct atmospheric transfer by inhalation, indirect atmospheric transfer by deposit on certain plants, marine food chains, and perhaps transfer resulting from the use and valorization of wastes [fr

Real-time environmental monitoring at the Japan Nuclear Cycle Development Institute O-arai Engineering Center. Using the internet to promote safety and environmental transparency

International Nuclear Information System (INIS)

Motomatsu, Sheila; Nakashima Inoue, Naoko

2000-12-01

The report documents the results of an effort at the Japan Nuclear Cycle Development Institute O-arai Engineering Center (JNC/OEC) to provide via the Internet, in real-time, environmental monitoring data to promote safety and environmental transparency. Provided in Japanese as well as in English, the Internet site provides assurance that OEC nuclear operations are being conducted in a manner that is safe to both people in the surrounding area and the environment. This work conducted by Environmental Monitoring Team of the OEC Safety Administration Section fulfilled the assignment to release data real-time via the Internet tasked by the Information Disclosure Section of the JNC Headquarters Public Relations Division. The work conducted by the visiting exchange scientist fulfilled the experimental portion of Action Sheet 34 of the Agreement between JNC and DOE for Cooperation in Research and Development Concerning Nuclear Material Control and Accounting Measures for Safeguards and Nonproliferation. In Japan, the project for Action Sheet 34 Personnel Exchange on Remote Monitoring and Transparency' entailed both a study and an experiment on how remote monitoring technologies can be used to promote nonproliferation, environmental and safety transparency. Environmental airborne radionuclide monitoring falls under the definition of remote monitoring technology more broadly defined as 'remotely accessed unattended monitoring system technology'. (author)

Quality assurance aspects of the environmental code NECTAR

International Nuclear Information System (INIS)

Macdonald, H.F.; Nair, S.; Mascall, R.A.

1986-02-01

This report describes the quality assurance (QA) procedures which have been adopted in respect of the Environment code NECTAR (Nuclear Environmental Consequences, Transport of Activity and Risks). These procedures involve the verification, validation and evaluation of the individual NECTAR modules, namely RICE, SIRKIT, ATMOS, POPDOS and FOODWEB. The verification and validation of each module are considered in turn, while the final part of the report provides an overall evaluation of the code. The QA procedures are designed to provide reassurance that the NECTAR code is free from systematic errors and will perform calculations within the range of uncertainty and limitations claimed in its documentation. Following consideration of a draft version of this report by the Off-site Dose Methodology Working Group, the ATMOS, POPDOS and FOODWEB modules of NECTAR have been endorsed for use by the Board in reactor design and safety studies. (author)

Nuclear Safety. Technical Progress Journal, October--December 1991: Volume 32, No. 4

Energy Technology Data Exchange (ETDEWEB)

1991-01-01

This document is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

Offshore environmental aspects

NARCIS (Netherlands)

Lindeboom, H.J.; Degraer, S.

2016-01-01

The number of offshore wind farms (OWFs) is increasing rapidly, leading to questions about the cumulative environmental impact of such farms. The major impacts are caused by the noise produced in the building phase, the new hard substratum, the moving rotor blades, possible underwater noise in

Nuclear power and safety

International Nuclear Information System (INIS)

Chidambaram, R.

1992-01-01

Some aspects of safety of nuclear power with special reference to Indian nuclear power programme are discussed. India must develop technology to protect herself from the adverse economic impact arising out of the restrictive regime which is being created through globalization of safety and environmental issues. Though the studies done and experience gained so far have shown that the PHWR system adopted by India has a number of superior safety features, research work is needed in the field of operation and maintenance of reactors and also in the field of reactor life extension through delaying of ageing effects. Public relations work must be pursued to convince the public at large of the safety of nuclear power programme. The new reactor designs in the second stage of evolution are based on either further improvement of existing well-proven designs or adoptions of more innovative ideas based on physical principles to ensure a higher level of safety. The development of Indian nuclear power programme is characterised by a balanced approach in the matter of assuring safety. Safety enforcement is not just looked upon as a pure administrative matter, but experts with independent minds are also involved in safety related matters. (M.G.B.)

Technical basis for environmental qualification of computer-based safety systems in nuclear power plants

International Nuclear Information System (INIS)