Protection of environmental contamination by radioactive materials and remediation of environment
International Nuclear Information System (INIS)
2003-05-01
This report consisted of the environmental contamination of radioactive and non-radioactive materials. 38 important accident examples of environmental contamination of radioactive materials in the world from 1944 to 2001 are stated. Heavily polluted areas by accidents are explained, for example, Chernobyl, atomic reactor accidents, development of nuclear weapon in USA and USSR, radioactive waste in the sea. The environmental contamination ability caused by using radioactive materials, medical use, operating reactor, disposal, transferring, crashing of airplane and artificial satellite, release are reported. It contains measurements and monitor technologies, remediation technologies of environmental contamination and separation and transmutation of radioactive materials. On the environmental contamination by non-radioactive materials, transformation of the soil contamination in Japan and its control technologies are explained. Protection and countermeasure of environmental contamination of radioactive and non-radioactive materials in Japan and the international organs are presented. There are summary and proposal in the seventh chapter. (S.Y.)
Environmental protection in thermal power plants
International Nuclear Information System (INIS)
1987-01-01
This workbook is a compilation of the most important facts and data that are relevant today for environmental protection in thermal power plants. Unlike the other issues the text is not in the form of a random collection of data but in the form of a complete presentation. Possible elaboration projects for pupils can be easily derived from the individual sections. These deal with: the discussion about environmental protection; forest decline; sources of emission; nuisances in the Federal Republic of Germany; environmental protection in fossil-fuel power plants - clean air - cooling water utilization and water protection - noise; environmental protection in nuclear power plants - radioactive material produced in nuclear reactors and the retention of such materials - radioactive waste materials - monitoring of radioactive emissions; accessory materials and hints. (orig./HSCH) [de
1982 UCC-ND/GAT environmental protection seminar: proceedings
International Nuclear Information System (INIS)
1983-04-01
This environmental protection seminar was divided into seven sessions: (1) general environmental protection, (2) air and water pollution control, (3) spill control and countermeasures, (4) toxic materials control, (5) hazardous materials control, (6) environmental protection projects, and (7) cost benefit analysis. Separate abstracts have been prepared for the 41 papers presented therein
1982 UCC-ND/GAT environmental protection seminar: proceedings
Energy Technology Data Exchange (ETDEWEB)
1983-04-01
This environmental protection seminar was divided into seven sessions: (1) general environmental protection, (2) air and water pollution control, (3) spill control and countermeasures, (4) toxic materials control, (5) hazardous materials control, (6) environmental protection projects, and (7) cost benefit analysis. Separate abstracts have been prepared for the 41 papers presented therein. (ACR)
International Nuclear Information System (INIS)
Eisenhower, B.M.; Oakes, T.W.
1982-01-01
In the Federal Register of May 19, 1980, the US Environmental Protection Agency promulgated final hazardous waste regulations according to the Resource Conservation and Recovery Act (RCRA) of 1976. The major substantive portions of these regulations went into effect on November 19, 1980, and established a federal program to provide comprehensive regulation of hazardous waste from its generation to its disposal. In an effort to comply with these regulations, a Hazardous Materials Management and Control Program was established at Oak Ridge National Laboratory. The program is administered by two Hazardous Materials Coordinators, who together with various support groups, ensure that all hazardous materials and wastes are handled in such a manner that all personnel, the general public, and the environment are adequately protected
International Nuclear Information System (INIS)
Klinda, J.; Lieskovska, Z.
1998-01-01
In this chapter environmental protection in the Slovak Republic in 1997 are reviewed. The economics of environmental protection, state budget, Slovak state environmental fund, economic instruments, environmental laws, environmental impact assessment, environmental management systems, and environmental education are presented
Pressure Shell Approach to Integrated Environmental Protection
Kennedy, Kriss J.
2011-01-01
The next generation of exploration mission human systems will require environmental protection such as radiation protection that is effective and efficient. In order to continue human exploration, habitat systems will require special shells to protect astronauts from hostile environments. The Pressure Shell Approach to integrated environmental (radiation) protection is a multi-layer shell that can be used for multifunctional environmental protection. Self-healing, self-repairing nano technologies and sensors are incorporated into the shell. This shell consists of multiple layers that can be tailored for specific environmental protection needs. Mainly, this innovation focuses on protecting crew from exposure to micrometeorites, thermal, solar flares, and galactic cosmic ray (GCR) radiation. The Pressure Shell Approach consists of a micrometeoroid and secondary ejecta protection layer; a thin, composite shell placed in between two layers that is non-structural; an open cavity layer that can be filled with water, regolith, or polyethylene foam; a thicker composite shell that is a structural load bearing that is placed between two layers; and a bladder coating on the interior composite shell. This multi-layer shell creates an effective radiation protection system. Most of its layers can be designed with the materials necessary for specific environments. In situ materials such as water or regolith can be added to the shell design for supplemental radiation protection.
Issues regarding environmental protection in Romania
Directory of Open Access Journals (Sweden)
Mirela Draghicescu
2010-12-01
Full Text Available The “environmental protection” activity in our country should be approached by taking into consideration its entire complexity, and the most reliable solutions may be provided only by direct and permanent reference to the vast issue of social development in its entirety. The present work aims to draw attention towards pollution, the main cause of environmental deterioration in Romania, as well as towards the management of waste materials, while taking into account the national strategy. In Romania, environmental protection is a distinct domain of the national policy, establishing the priority objectives by “The National Strategy for Environmental Protection”, according to the communitarian strategy, as well as to the tendencies and initiatives existing at global level. Our country’s efforts over the past years with respect to environmental protection are very important in the framework of contemporary economy and are reflected in the expenses incurred for environmental protection.
Environmental research and environmental protection
International Nuclear Information System (INIS)
1975-01-01
At the request of the Ministry for Research and Technology, the 'Arbeitsgemeinschaft der Grossforschungseinrichtungen' (AGF) presented in 1972 an information brochure called 'Activities in the field of environmental research and environmental protection', closely associated with the environmental programme of the Federal government (1971). The information brochure reports on those activities of the working group's members which are closely, or less closely, connected with questions concerning environmental research and protection, however, investments for the protection of the individual facilities in internal operation are excluded. The AGF programme 'Environmental research and environmental protection' comprises contributions, brought up to date, of member companies. From the 'AGF programme survey 1974' it contains 'Environmental research' as well as aspects of nuclear development with environmental relevance. Technologies not harmful to the environment developed by the research facilities are only mentioned very briefly. (orig.) [de
Environmental protection economically viable
International Nuclear Information System (INIS)
Dartsch, B.; Hildebrandt, T.
1994-01-01
The Environmental Technology Forum for Industry and Research (Utech) was held for the fifth time this year at the International Congress Centre in Berlin. The main themes of this year's Utech were additive environmental protection, production-integrated environmental protection, management and economic aspects of environmental protection, research and development in environmental protection as well as environmental information legislation. (orig.) [de
Engineered nanoparticles represent a unique hazard to human health and the environment because their inherent characteristics differ significantly from commonly used chemicals and bulk forms of materials. The U.S. Environmental Protection Agency (EPA) is responsible for protecti...
Radiation protection in the field of environmental protection
International Nuclear Information System (INIS)
Zhao Yamin
2003-01-01
The relationship of radiation protection with environmental protection, the sources that may give rise to the environmental radiation contamination, and the system of radiation protection and the fundamental principles and requirements for radiation environmental management are introduced. Some special radiation protection problems faced with in the radiation environmental management are discussed. (author)
Coated silicon comprising material for protection against environmental corrosion
Hazel, Brian Thomas (Inventor)
2009-01-01
In accordance with an embodiment of the invention, an article is disclosed. The article comprises a gas turbine engine component substrate comprising a silicon material; and an environmental barrier coating overlying the substrate, wherein the environmental barrier coating comprises cerium oxide, and the cerium oxide reduces formation of silicate glass on the substrate upon exposure to corrodant sulfates.
International Nuclear Information System (INIS)
Martinez, A.S.
1987-01-01
The question of environment protection related to the use of nuclear energy aiming to power generation, based on the harmonic concept of economic and industrial development, preserving the environment, is discussed. A brief study of environmental impacts for some energy sources, including nuclear energy, to present the systems of a nuclear power plant which aim at environmental protection, is done. (M.C.K.) [pt
Federal Register, 1987
1987-01-01
The Environmental Protection Agency (EPA) has issued a final rule under the Toxic Substance Control Act (TSCA) to require all local education agencies (LEAs) to identify asbestos-containing materials in their school buildings and take appropriate action to control release of asbestos fibers. The LEAs are required to describe their activities in…
The future of environmental protection: A U.S. regulator's perspective
International Nuclear Information System (INIS)
Dicus, G.J.
2002-01-01
The U.S. has the largest number of nuclear installations of any country in the world. This puts us at an extreme end of the spectrum. As a result, I have touched on many issues relative to environmental protection. Therefore in summary, let me list these issues: Before moving ahead, look at what has been done thus far. Executive policy and a national regulatory infrastructure. - Environmental Impact Statements. - Environmental Justice. Standards determined by law or courts. Consultation with other national agencies and countries. Improving the timetable for issuing regulations and supporting guidance. Improved communications and training of staff. Transparency and flexibility throughout the regulatory process. Differences in regulatory approaches are OK, as long as the end result is to achieve sound national environmental and public health and safety policy. I believe that this series of conferences represents an excellent opportunity to come to resolution about the future of environmental regulations and policies. Having this information will assist us in harmonizing any proposed recommendation(s) for radiological protection of the environment involving commodities containing radioactive materials or unrestricted release of slightly radioactive materials by using the existing environmental radiation protection framework as a starting point. Doing so in an open, encompassing manner will, in my opinion, go a long way towards resolving some of the current controversies about radiation protection standards in the U.S., as well as around the world, with the desirable end result of increasing public confidence in our environmental radiation protection programs. (author)
Environmental monitoring of low-level radioactive materials
International Nuclear Information System (INIS)
Jester, W.A.; Yu, C.
1985-01-01
The authors discuss some of the current rationale behind the environmental monitoring of low-level radioactive materials are as follows: Committee 4 of the International commission on Radiological Protection (ICRP) defined three broad objectives for environmental monitoring: 1) assessment of the actual or potential exposure of humans to radioactive materials or radiation present in their environment or the estimation of the probable upper limits of such exposure; 2) scientific investigation, sometimes related to the assessment of exposures, sometimes to other objectives; 3) improved public relations. Various regulations have been written requiring environmental monitoring to ensure that the public is not being exposed to excessive amounts of radiation from natural sources or from human activities. An example of the monitoring of natural sources of radiation is a requirement of the Environmental Protection Agency's (EPA) National Interim Primary Drinking Water Regulations whereby U.S. water supply companies must have drinking water monitored at least once every four years for radionuclides, primarily the naturally occurring radium-226
The environmental protection in the Republic of Lithuania. Information bulletin No 1
International Nuclear Information System (INIS)
1992-01-01
Collection of Lithuanian laws regulating environmental protection in Lithuania is presented. The main of them is the Law on environmental protection of the Republic of Lithuania. This law establish the main rights and duties of legal and natural persons guaranteeing the right of the population of the Republic of Lithuania to healthy and safe environment, harmonic development of the interaction between the society and nature. Among general principles of environment protection, regulation of economic activities and introduction of basis of taxation for environment pollution, the law defines the main requirements for the production and usage of radioactive materials, management of radioactive waste. According to the article 21 usage of radioactive materials for the production of nuclear weapons is prohibited. By the article 23 importation of radioactive waste into the Republic of Lithuania for storage, treatment and disposal is prohibited. Two governmental institutions - Environmental Protection Department and Ministry of Health are responsible for the preparation of regulations for the record-keeping, transportation, storage, disposal of radioactive materials as well as norms of radiation protection. The full text of the Law on taxes on the state natural resources, Law on taxes on environmental pollution are also included in this publication
The environmental protection in the Republic of Lithuania. Information bulletin No 1
Energy Technology Data Exchange (ETDEWEB)
NONE
1993-12-31
Collection of Lithuanian laws regulating environmental protection in Lithuania is presented. The main of them is the Law on environmental protection of the Republic of Lithuania. This law establish the main rights and duties of legal and natural persons guaranteeing the right of the population of the Republic of Lithuania to healthy and safe environment, harmonic development of the interaction between the society and nature. Among general principles of environment protection, regulation of economic activities and introduction of basis of taxation for environment pollution, the law defines the main requirements for the production and usage of radioactive materials, management of radioactive waste. According to the article 21 usage of radioactive materials for the production of nuclear weapons is prohibited. By the article 23 importation of radioactive waste into the Republic of Lithuania for storage, treatment and disposal is prohibited. Two governmental institutions - Environmental Protection Department and Ministry of Health are responsible for the preparation of regulations for the record-keeping, transportation, storage, disposal of radioactive materials as well as norms of radiation protection. The full text of the Law on taxes on the state natural resources, Law on taxes on environmental pollution are also included in this publication.
ENEA's role in environmental protection
International Nuclear Information System (INIS)
1992-05-01
The 1990-1994 Five-Year Plan of ENEA (the Italian Agency for New Technology, Energy and the Environment) stipulates that the Agency must reconcile its objectives related to energy with those related to the environment by aiming at a more efficient and rational exploitation of energy sources. This necessity has been reiterated in Italian Law 282/91 which assigns ENEA the task of providing technical and scientific support to the Ministry of the Environment. The aims, work schedule and financing of this task have been laid down in an environmental protection program whose main goals include: the protection and use rationalization of water supplies; the development of waste processing and disposal systems which incorporate energy and materials recovery systems; and the setting up of environmental monitoring networks. Within the framework of these activities, this paper reports on the management and organization aspects of five integrated projects which involve research efforts on: the reduction of the environmental impact of industrial activities; the characterization, status and dynamics of the environment; the interrelationships between environmental quality and the health of human populations; the effects of agricultural-industrial activities on global climate; the effects of human activities on the environmental quality of the Mediterranean Sea
Sprayable Phase Change Coating Thermal Protection Material
Richardson, Rod W.; Hayes, Paul W.; Kaul, Raj
2005-01-01
NASA has expressed a need for reusable, environmentally friendly, phase change coating that is capable of withstanding the heat loads that have historically required an ablative thermal insulation. The Space Shuttle Program currently relies on ablative materials for thermal protection. The problem with an ablative insulation is that, by design, the material ablates away, in fulfilling its function of cooling the underlying substrate, thus preventing the insulation from being reused from flight to flight. The present generation of environmentally friendly, sprayable, ablative thermal insulation (MCC-l); currently use on the Space Shuttle SRBs, is very close to being a reusable insulation system. In actual flight conditions, as confirmed by the post-flight inspections of the SRBs, very little of the material ablates. Multi-flight thermal insulation use has not been qualified for the Space Shuttle. The gap that would have to be overcome in order to implement a reusable Phase Change Coating (PCC) is not unmanageable. PCC could be applied robotically with a spray process utilizing phase change material as filler to yield material of even higher strength and reliability as compared to MCC-1. The PCC filled coatings have also demonstrated potential as cryogenic thermal coatings. In experimental thermal tests, a thin application of PCC has provided the same thermal protection as a much thicker and heavier application of a traditional ablative thermal insulation. In addition, tests have shown that the structural integrity of the coating has been maintained and phase change performance after several aero-thermal cycles was not affected. Experimental tests have also shown that, unlike traditional ablative thermal insulations, PCC would not require an environmental seal coat, which has historically been required to prevent moisture absorption by the thermal insulation, prevent environmental degradation, and to improve the optical and aerodynamic properties. In order to reduce
Environmental protection Implementation Plan
International Nuclear Information System (INIS)
Holland, R. C.
1999-01-01
This ''Environmental Protection Implementation Plan'' is intended to ensure that the environmental program objectives of Department of Energy Order 5400.1 are achieved at SNL/California. This document states SNL/California's commitment to conduct its operations in an environmentally safe and responsible manner. The ''Environmental Protection Implementation Plan'' helps management and staff comply with applicable environmental responsibilities
Environmental protection and petroleum business
Energy Technology Data Exchange (ETDEWEB)
1986-03-01
This report is a summary of panel discussion concerning environmental protection and petroleum business. Summarized here are country presentations from Iraq, Malaysia, Saudi Arabia, and Venezuela, comments by two Japanese panelists from petroleum companies, questions, answers, and discussions, and summary by the session moderator. The country presentation centered on pollution problems and environmental protection policies in each country, national policy regarding environmental problems, and comprehensive planning for environmental protection in specific industrial areas. The panelists' reports mainly concerned the legal framework for environmental protection in Japan and the importance of investment for environmental protection. Questions and answers clarified the problems. The moderator, when summarizing the panel discussion, stressed that environmental problems should be addressed on a global level and that early preventive measures should be taken, and also emphasized the polluter pays principle.
De Carvalho, Cristina A. R.; Filho, Walter Leal; Hale, William H. G.
1998-01-01
Describes the problems encountered in developing environmental education in federally protected areas in Brazil. Suggests that the development of environmental education in those protected areas has several limitations including financial resources, lack of training, material resources, and lack of policy on environmental education. (Author/CCM)
Environmental Protection Agency, Protecting Children's Environmental Health
... and Research Centers Contact Us Share Protecting Children's Environmental Health Children are often more vulnerable to pollutants ... during development. Learn more about children's health, the environment, and what you can do. Basic Information Children ...
Energy Technology Data Exchange (ETDEWEB)
NONE
2017-01-15
The environmental protection is part of the radiation protection but without defined regulations concerning the protection of non-human species and the ecological systems. In 2008 the SSK (Strahlenschutzkommission) was asked to elaborate measures for environmental radiation protection. Part of the recommendation was the application of sustainability concepts on radioactive materials.
CEBAF - environmental protection program plan
International Nuclear Information System (INIS)
1995-01-01
An important objective in the successful operation of the Continuous Electron Beam Accelerator Facility (CEBAF) is to ensure protection of the public and the environment. To meet this objective, the Southeastern Universities Research Association, Inc., (SURA) is committed to working with the US Department of Energy (DOE) to develop, implement, and manage a sound and workable environmental protection program at CEBAF. This environmental protection plan includes information on environmental monitoring, long-range monitoring, groundwater protection, waste minimization, and pollution prevention awareness program plan
Environmental protection implementation plan
International Nuclear Information System (INIS)
Holland, R.C.
1998-03-01
This Environmental Protection Implementation Plan is intended to ensure that the environmental program objectives of Department of Energy Order 5400.1 are achieved at SNL/California. This document states SNL/California's commitment to conduct its operations in an environmentally safe and responsible manner. The Environmental Protection Implementation Plan helps management and staff comply with applicable environmental responsibilities. SNL is committed to operating in full compliance with the letter and spirit of applicable environmental laws, regulations, and standards. Furthermore, SNL/California strives to go beyond compliance with legal requirements by making every effort practical to reduce impacts to the environment to levels as low as reasonably achievable
Environmental aspects at radiological protection in ArcelorMittal Monlevade
International Nuclear Information System (INIS)
Silva Filho, Cleber Marques; Soares Filho, Mauricio; Franco, Jose Otavio Andrade; Leite, Roberto Paulo; Goncalves, Breno Cunha; Costa, Jose Gustavo de Souza
2010-01-01
ArcelorMittal Monlevade Environmental Management of Radiological Protection is based on radiological protection team training, start up of radioactivity materials detection equipment in several steps of industrial processes and internal procedures according to CNEN - Nuclear Energy National Commission guidelines. At this way ArcelorMittal Monlevade seeks to guarantee the safety of employees, community, customers, equipment and the environment and their business. (author)
Neutron protection material and neutron protection devices made of such material
International Nuclear Information System (INIS)
Ries, W.
1984-01-01
This is concerned with a neutron protection material made of thermoplastic or thermosetting plastic from high molecule hydrocarbon compounds with particularly high hydrogen and carbon contents as braking or shielding material (moderator) for fast neutrons. The plastic can contain boron for absorbing low energy neutrons. The material is used to manufacture foil, plates, pipes, shielding walls, components, bodies for radiation protection equipment, devices and plant and for neutron protection clothes. (orig./HP) [de
Environmental protection: Shifting the focus toward the protected object
Directory of Open Access Journals (Sweden)
Cvetić Radenka
2013-01-01
Full Text Available This article is an attempt to provide a comprehensive overview of the rationale which led to developments in the law of environmental protection in a direction of an even more efficient protection of environment from human beings. There has been a transformation of the constitutionally protected right to a healthy environment to the Constitutional guarantee which involves both duty and responsibility for its protection. There has also been a shift from declaratory protection toward enforceable prohibitions and orders. These transformations have occurred when the society faced, under dramatic circumstances, the situation which shows that failure to protect the common good could lead to catastrophic consequences. The system of environmental protection, which enables sustainable development, is based on the primacy of the precautionary principle which deals with prevention and reduction of probability of harm, as well as on the no fault liability of the polluter for the environmental harm even in the absence of the claim for damages. The efficacy of the environmental protection could be improved by raising the awareness of the preservation of environment. The understanding that the protection of environment amounts to a survival of a mankind could lead to creating rights for the environment as such.
International Nuclear Information System (INIS)
Hull, A.P.
1979-01-01
Environmental Studies and Internal Dosimetry projects include: Environmental Protection; 1977 Environmental Monitoring Report; Sewage Sludge Disposal on the Sanitary Landfill; Radiological Analyses of Marshall Islands Environmental Samples, 1974 to 1976; External Radiation Survey and Dose Predictions for Rongelap, Utirik, Rongerik, Ailuk, and Wotje Atolls; Marshall Islands - Diet and Life Style Study; Dose Reassessment for Populations on Rongelap and Utirik Following Exposure to Fallout from BRAVO Incident (March 1, 1954); Whole Body Counting Results from 1974 to 1979 for Bikini Island Residents; Dietary Radioactivity Intake from Bioassay Data, a Model Applied to 137 Cs Intake by Bikini Island Residents; and External Exposure Measurements at Bikini Atoll
What can information technology do for environmental protection?
International Nuclear Information System (INIS)
Trauboth, H.
1987-01-01
Information technology plays an important role in the accomplishment of an effective environmental protection. Prerequisite for its comprehensive implementation is the legal and economic achievement of closed material cycles for supply and waste discharge in production and consumption as well as in nuclear technology. Modern information processing may be used for the inventory of natural and emission sources, to gain knowledge on the functioning mechanisms of nature, for the planning of a considerate exploitation of natural recources and for the ecology-oriented monitoring and control of industrial plants. The state of the art of the corresponding information technology and new areas of research especially in measurement technology are shown. The breadth of the great opportunities of information technology for environmental protection is discribed. (orig.) [de
Legal study on water environmental protection of Three Gorges Reservoir Area
Institute of Scientific and Technical Information of China (English)
DENG He
2007-01-01
Water environment security of the Three Gorges Reservoir Area has become a more extensive concern since the impoundment of the reservoir. This paper describes the existing water environmental hazards and defects in current legal system for water environmental protection in this area, and also discusses their possible causes and potential problems in the future based on first hand materials and other literature. According to the theories of integrated river basin management and environmental equity principle, legal proposals are put forward, which include building an unitary legal system dedicated to the Reservoir Area, setting up a basin authority of the Yangtze River to preside over the resources protection and development, using interests' compensation system to solve interest conflicts among different reaches, and making concrete regulations to direct public participation in water environmental security protection of the Three Gorges Reservoir Area.
GEOGRAPHY AND ENVIRONMENTAL PROTECTION AGENCY
The US Environmental Protection Agency helps state and local governments protect the environment by encouraging good environmental management and by regulating human activities to ensure clean air and water. At the Corvallis research laboratory for the EPA, we improve the ways t...
Inspection control and the environmental protection
Directory of Open Access Journals (Sweden)
Milkov Dragan L.
2015-01-01
Full Text Available Environmental protection is the task of many administrative bodies, but the activity of the environmental inspection is of special importance. According to the Law on Environmental Protection, inspection's tasks in this area belong to the competence of republican bodies, ie. Ministry of Agriculture and Environmental Protection. Autonomous province and local self-government have only delegated competence in this field, under condition that this is explicitly regulated in special laws. Environmental inspection's activity consists in preventive actions, certain prior - preparatory activities and the audit itself. In addition, following the intervention of the Inspector issue of the control may be corrective or repressive. According to the Law on Inspection Control and the Law on Environmental Protection, the inspectors have a number of powers and responsibilities, which enable them to ensure the lawful and proper conduct of individuals and legal entities.
Environmental protection in Schleswig-Holstein
International Nuclear Information System (INIS)
Knauer, N.
1977-01-01
With the contributions by Norbert Knauer, the Akademie Sankelmark presents one of the results of its activities. Prof. Knauer is head of the department of grassland management, cropping and landscape ecology at Kiel University. He is a member of the Experts Commission for Problems of Environmental Protection of the Schleswig-Holstein Government, of the Schleswig-Holstein Curatory for Environmental Protection as well as of the regional planning council. He is also regional supervisor for nature and landscape conservation of the state of Schleswig-Holstein. All these functions have made him an expert in the field of landscape conservation and environmental protection. (orig.) [de
187 DISPLACEMENT AND ENVIRONMENTAL PROTECTION
African Journals Online (AJOL)
Fr. Ikenga
The national and international communities are confronted with the monumental task of ... displacement and environmental protection present a vicious cycle which today has ... Thus, issues of environmental protection viz-a-viz investment and .... out the conditions for product or process standards, the use of best available ...
19th JANNAF Safety and Environmental Protection Subcommittee Meeting. Volume 1
Cocchiaro, J. E. (Editor); Becker, D. L. (Editor)
2002-01-01
This volume, the first of two volumes, is a compilation of 22 unclassified/unlimited technical papers presented at the 19th Joint Army-Navy-NASA-Air Force (JANNAF) Safety & Environmental Protection Subcommittee Meeting. The meeting was held 18-21 March 2002 at the Sheraton Colorado Springs Hotel, Colorado Springs, Colorado. Topics covered include green energetic materials and life cycle pollution prevention; space launch range safety; propellant/munitions demilitarization, recycling, and reuse: and environmental and occupational health aspects of propellants and energetic materials.
A proposed approach to environmental protection
International Nuclear Information System (INIS)
Maloney, R.J.
1997-01-01
The objective of my presentation today is to present our thinking to date on the subject of environmental protection at nuclear facilities. What I intend to present is not a finished product, but the first steps in establishing a new and systematic approach to environmental protection. An important factor that will affect the progress of this process is the current assessment of radionuclides (released from nuclear facilities) under the aegis of the Canadian Environmental Protection Act (CEPA). It is expected that the CEPA assessment will take in the order of two years to complete. In keeping with this schedule, we expect the overall process of establishing a new and systematic approach to environmental protection to be a long-term project taking up to five years to complete. It will start with the establishment of an AECB policy regarding environmental protection and continue with the development of programs, procedures, guides, standards and criteria to implement the policy. (author)
Perspectives on environmental protection of refractory metals
International Nuclear Information System (INIS)
Perking, R.A.
1992-01-01
Alloys of refractory metals which combine high strength to weight ratios with useful low-temperature toughness and ductility have been designed to meet the requirements for the next generation of high-temperature aerospace structural materials with one exception: long term resistance to oxidation. It is considered unlikely that refractory metal alloys can be modified to possess useful resistance to oxidation as bulk materials or that coating can be designed to provide high reliability fail-safe protection for the structural alloys developed to date. Recent developments indicate that bulk alloys of W and Mo can be designed to possess short term resistance to oxidation, providing a base material which can be coated to extend useful life with fail-safe protection in the event of random coating failures. Current research on silicide coatings indicates that significant improvements in coating reliability and performance also are feasible. The technical basis for these conclusions is presented in this paper and the direction of future work that could lead to environmentally stable refractory metal alloy/coating systems is discussed
Modelling transport of waste material leachate in soils in support of environmental standards
van Eijkeren JCH; Aalbers TG; de Wilde PGM
1992-01-01
In the Netherlands a process of defining environmental standards is going on. These standards serve to protect the environment at the one hand, and to stimulate the reuse of rest-materials, e.g. ash from blast-furnaces, as building materials at the other hand. In order to come to an environmental
Protection and control of nuclear materials
International Nuclear Information System (INIS)
Jalouneix, J.; Winter, D.
2007-01-01
In the framework of the French regulation on nuclear materials possession, the first liability is the one of operators who have to know at any time the quantity, quality and localization of any nuclear material in their possession. This requires an organization of the follow up and of the inventory of these materials together with an efficient protection against theft or sabotage. The French organization foresees a control of the implementation of this regulation at nuclear facilities and during the transport of nuclear materials by the minister of industry with the sustain of the institute of radiation protection and nuclear safety (IRSN). This article presents this organization: 1 - protection against malevolence; 2 - national protection and control of nuclear materials: goals, administrative organization, legal and regulatory content (authorization, control, sanctions), nuclear materials protection inside facilities (physical protection, follow up and inventory, security studies), protection of nuclear material transports (physical protection, follow up), control of nuclear materials (inspection at facilities, control of nuclear material measurements, inspection of nuclear materials during transport); 3 - international commitments of France: non-proliferation treaty, EURATOM regulation, international convention on the physical protection of nuclear materials, enforcement in France. (J.S.)
Rethinking Environmental Protection: Meeting the Challenges ...
Background: The U.S. Environmental Protection Agency (EPA) has made great progress in addressing some major environmental problems. These successes were framed within EPA’s statutory mandates which are largely media-specific and receptor-focused and follow a segmented risk-based construct. Today’s environmental problems are increasingly complex, and new approaches are needed to achieve sustainable solutions that protect the environment and public health. Objectives: We provide an overview of environmental protection at EPA and highlight today’s environmental challenges. We provide case examples of systems approaches that consider the links between environment and human health. We offer a strategic framework for tackling challenges so EPA can continue to protect the environment and public health.Discussion: Expanded approaches will be transdisciplinary, informed by vast new sources of data, and build upon new stakeholder partnerships. A systems approach to environmental protection looks at problems holistically, includes the drivers and stressors that impact the issue and the dimensions that frame it, and integrates various types of data from health, ecological, and social sciences, with the goal of formulating sustainable solutions to environmental issues. Conclusions: The natural environment and human health are inextricably linked, and human health, well-being, and economic prosperity depend on healthy ecosystems. EPA research is leading an evolution in
International Nuclear Information System (INIS)
1995-12-01
DOE has decided to consolidate, process, and store Category I and II Special Nuclear Material (SNM) in Building 371 at Rocky Flats, in order to improve safeguards and security and to reduce baseline facility and personnel costs. Once all SNM in consolidated into this building, maintaining the full 200-acre protected area would no longer be necessary, and the protected area (PA) could be reconfigured to include only the protection requirements necessary for Building 371. DOE Environmental Assessment 1132 has been written to evaluate options for reconfiguration of the PA; it addressed potential environmental impacts resulting from construction of fence alternatives. Possible routes for the new fence section were examined for environmental impact, feasibility, cost, and complexity. A number of the alternatives, including the proposed action, would impact wetlands
Valentine, Peter G.; Lawrence, Timothy W.; Gubert, Michael K.; Milos, Frank S.; Kiser, James D.; Ohlhorst, Craig W.; Koenig, John R.
2006-01-01
As a collaborative effort among NASA Centers, the "Lightweight Nonmetallic Thermal Protection Materials Technology" Project was set up to assist mission/vehicle design trade studies, to support risk reduction in thermal protection system (TPS) material selections, to facilitate vehicle mass optimization, and to aid development of human-rated TPS qualification and certification plans. Missions performing aerocapture, aerobraking, or direct aeroentry rely on advanced heatshields that allow reductions in spacecraft mass by minimizing propellant requirements. Information will be presented on candidate materials for such reentry approaches and on screening tests conducted (material property and space environmental effects tests) to evaluate viable candidates. Seventeen materials, in three classes (ablatives, tiles, and ceramic matrix composites), were studied. In additional to physical, mechanical, and thermal property tests, high heat flux laser tests and simulated-reentry oxidation tests were performed. Space environmental effects testing, which included exposures to electrons, atomic oxygen, and hypervelocity impacts, was also conducted.
Radiation protecting clothing materials
International Nuclear Information System (INIS)
Mio, Kotaro; Ijiri, Yasuo.
1986-01-01
Purpose: To provide radiation protecting clothing materials excellent in mechanical strength, corrosion resistance, flexibility and flexing strength. Constitution: The radiation protecting clothing materials according to this invention has pure lead sheets comprising a thin pure lead foil of 50 to 150 μm and radiation resistant organic materials, for example, polyethylene with high neutron shielding effect disposed to one or both surfaces thereof. The material are excellent in the repeating bending fatigue and mechanical strength, corrosion resistance and flexibility and, accordingly, radiation protecting clothings prepared by using them along or laminating them also possess these excellent characteristics. Further, they are excellent in the handlability, particularly, durability to the repeated holding and extension, as well as are preferable in the physical movability and feeling upon putting. The clothing materials may be cut into an appropriate size, or stitched into clothings made by radiation-resistant materials. In this case, pure lead sheets are used in lamination. (Horiuchi, T.)
Environmental Protection Versus Foundry Engineering Practice
Directory of Open Access Journals (Sweden)
Maj M.
2017-06-01
Full Text Available • Theory and practice of environmental protection in the case of foundries in Europe and Asia • Experience resulting from the cooperation with the foundries in a few European countries, China and India • Phenomena and factors affecting the pollution of the natural environment and the implementation of measures aiming at the environmental protection. Every specialist dealing with foundry processes and their impact on environmental pollution must have encountered in their professional careers numerous situations in which the theory of environmental protection confronts the stark reality. The discrepancy between theory and practice can particularly be noticed in foundry engineering in developing countries where the contrasts between different countries and casting plants are extremely striking. The comparison of working conditions in European and Asian foundries provides a vast scope for further observations and analyses. Environmental protection seems not only a concern of manufacturers of castings, but also of their customers whose opinion exerts a significant influence on both the acceptability of working conditions and on the approach to environmental pollution adopted in metal casting industry. The article presents a number of examples of various outlooks on environmental issues in foundries manufacturing a wide range of cast steel and cast iron castings, where different technologies and production processes are applied.
Student Leadership Role for Environmental Protection
Directory of Open Access Journals (Sweden)
Ramona Isabel S. Ramirez
2017-05-01
Full Text Available The research focuses on the role of student organizations in the promotion of environmental education and protection. It assessed the student organizations’ initiatives and activities that address the environmental issues and problems. It determined whether student leadership can be an effective tool in addressing environmental concerns and promote environmental education. Descriptiveevaluative methods of research were used in the study. Documentary analysis was used to determine the programs, projects and activities conducted by the different student organizations along environmental education and protection. Interview and focused group discussions were employed to validate the secondary data and identify problems and constraints encountered by the organization. Results of the study showed that the University supports student leadership through the student organizations. Student organizations are empowered and given rights and privileges’ as stipulated in the student handbook. There were more than forty accredited student organizations in CBSUA. All of them initiated programs/projects and activities that are environment related as required by the university. Student leadership through student organizations is an effective tool in promoting environmental education and protection. Student empowerment through student organizations can promote student involvement in the most pressing concerns of environment protection.
Energy Technology Data Exchange (ETDEWEB)
NONE
2010-11-15
In the contribution under consideration, the Federal Statistical Office (Wiesbaden, Federal Republic of Germany) and the Federal Environmental Agency (Dessau-Rosslau, Federal Republic of Germany) present actual data and analyses from environmentally economic total computations. In Germany, the use of raw materials became more efficient. Thus, 580 tons of raw materials per million Euro of gross domestic product were needed in the year 2008, while still 680 tons of raw materials were needed in the year 2000. The economical handling of natural resources relieves the environment and enables economic chances for individual companies and national economy. The lowering of environmental effects is to be in the focus of withdrawal and use of raw materials. This requires a stronger reduction of the consumption of raw materials. Savings potentials and an increased efficiency must be aspired in the short and medium term. The politics must create suitable incentives and framework conditions. The contribution under consideration presents new activities and strategies in order to achieve these targets.
Tunable Polarity Carbon Fibers, a Holistic Approach to Environmental Protection.
García-Valverde, M Teresa; Ledesma-Escobar, Carlos A; Lucena, Rafael; Cárdenas, Soledad
2018-04-27
The pollution of environmental resources is an issue of social concern worldwide. Chemistry is essential for the design of decontamination strategies and analytical approaches to detect and monitor the contamination. Sorptive materials are usually required in both approaches and green synthesis should be used to minimize their own environmental impact. Carbon fibers (CFs) obtained by the pyrolysis of natural cellulose-rich materials fulfill these requirements. In this article, thirty CFs obtained under different conditions are chemically characterized and their sorption ability towards selected pollutants, covering a wide range of polarity, is evaluated. This study provides more profound knowledge related to the polarity of these materials, their interactions with chemical substances and allows the prediction of more appropriate materials (pyrolysis temperature and time) in order to remove the given pollutant. Furthermore, the use of CFs as sorptive materials for the extraction of contaminants from water samples to assist with their instrumental detection is outlined. In this sense, the use of CFs and gas chromatography with mass spectrometric detection allows the detection of selected pollutants in the low ng/mL range. Thus, this article provides an integrated approach to the potential of CFs for environmental protection.
Tunable Polarity Carbon Fibers, a Holistic Approach to Environmental Protection
Directory of Open Access Journals (Sweden)
M. Teresa García-Valverde
2018-04-01
Full Text Available The pollution of environmental resources is an issue of social concern worldwide. Chemistry is essential for the design of decontamination strategies and analytical approaches to detect and monitor the contamination. Sorptive materials are usually required in both approaches and green synthesis should be used to minimize their own environmental impact. Carbon fibers (CFs obtained by the pyrolysis of natural cellulose-rich materials fulfill these requirements. In this article, thirty CFs obtained under different conditions are chemically characterized and their sorption ability towards selected pollutants, covering a wide range of polarity, is evaluated. This study provides more profound knowledge related to the polarity of these materials, their interactions with chemical substances and allows the prediction of more appropriate materials (pyrolysis temperature and time in order to remove the given pollutant. Furthermore, the use of CFs as sorptive materials for the extraction of contaminants from water samples to assist with their instrumental detection is outlined. In this sense, the use of CFs and gas chromatography with mass spectrometric detection allows the detection of selected pollutants in the low ng/mL range. Thus, this article provides an integrated approach to the potential of CFs for environmental protection.
Environmentally sound management of hazardous waste and hazardous recyclable materials
International Nuclear Information System (INIS)
Smyth, T.
2002-01-01
Environmentally sound management or ESM has been defined under the Basel Convention as 'taking all practicable steps to ensure that hazardous wastes and other wastes are managed in a manner which will protect human health and the environment against the adverse effects which may result from such wastes'. An initiative is underway to develop and implement a Canadian Environmentally Sound Management (ESM) regime for both hazardous wastes and hazardous recyclable materials. This ESM regime aims to assure equivalent minimum environmental protection across Canada while respecting regional differences. Cooperation and coordination between the federal government, provinces and territories is essential to the development and implementation of ESM systems since waste management is a shared jurisdiction in Canada. Federally, CEPA 1999 provides an opportunity to improve Environment Canada's ability to ensure that all exports and imports are managed in an environmentally sound manner. CEPA 1999 enabled Environment Canada to establish criteria for environmentally sound management (ESM) that can be applied by importers and exporters in seeking to ensure that wastes and recyclable materials they import or export will be treated in an environmentally sound manner. The ESM regime would include the development of ESM principles, criteria and guidelines relevant to Canada and a procedure for evaluating ESM. It would be developed in full consultation with stakeholders. The timeline for the development and implementation of the ESM regime is anticipated by about 2006. (author)
Radiological protection and environmental management
International Nuclear Information System (INIS)
Perez Fonseca, A.
2010-01-01
From the beginning of its industrial activity twenty five years ago, the Juzbado Factory of Enusa Group has always upheld a strong commitment with Radiological Protection and environmental respect and protection. Consequently, the evolution of dose shows a downward trend over the years. Although production has been increased gradually, the average doses to workers have stayed below 1 mSv. In order to identify and prevent the potential environmental impacts of its industrial activity and minimize its impact on the surroundings, the facility develops and environmental management system according to UNE-EN-ISO 14001 since 1999. (Author)
Radiation protection and environmental protection
International Nuclear Information System (INIS)
Xie Zi; Dong Liucan; Zhang Yongxing
1994-01-01
A collection of short papers is presented which review aspects of research in radiation and environmental protection carried out by the Chinese Institute of Atomic Energy in 1991. The topics covered are: the analysis of Po 210 in the gaseous effluent of coal-fired boilers; the determination of natural radionuclide levels in various industrial waste slags and management countermeasures; assessment of the collective radiation dose from natural sources for the Chinese population travelling by water; the preliminary environmental impact report for the multipurpose heavy water research reactor constructed by China for the Islamic Republic of Algeria. (UK)
Y-12 Site environmental protection program implementation plan (EPPIP)
Energy Technology Data Exchange (ETDEWEB)
NONE
1996-11-01
The Y-12 Plant Environmental Protection Program is conducted to: (1) protect public health and the environment from chemical and radiological releases occurring from current plant operations and past waste management and operational practices; (2) ensure compliance with federal, state, and local environmental regulations and DOE directives; (3) identify potential environmental problems; (4) evaluate existing environmental contamination and determine the need for remedial actions and mitigative measures; (5) monitor the progress of ongoing remedial actions and cleanup measures; and (6) inform the public of environmental issues relating to DOE operations. DOE Order 5400.1, General Environmental Protection Program, defines the general requirements for environmental protection programs at DOE facilities. This Environmental Protection Program Implementation Plan (EPPIP) defines the methods by which the Y-12 Plant staff will comply with the order by: (1) referencing environmental protection goals and objectives and identifying strategies and timetables for attaining them; (2) providing the overall framework for the design and implementation of the Y-12 Environmental Protection Program; and (3) assigning responsibilities for complying with the requirements of the order. The EPPIP is revised and updated annually.
Y-12 Site environmental protection program implementation plan (EPPIP)
International Nuclear Information System (INIS)
1996-11-01
The Y-12 Plant Environmental Protection Program is conducted to: (1) protect public health and the environment from chemical and radiological releases occurring from current plant operations and past waste management and operational practices; (2) ensure compliance with federal, state, and local environmental regulations and DOE directives; (3) identify potential environmental problems; (4) evaluate existing environmental contamination and determine the need for remedial actions and mitigative measures; (5) monitor the progress of ongoing remedial actions and cleanup measures; and (6) inform the public of environmental issues relating to DOE operations. DOE Order 5400.1, General Environmental Protection Program, defines the general requirements for environmental protection programs at DOE facilities. This Environmental Protection Program Implementation Plan (EPPIP) defines the methods by which the Y-12 Plant staff will comply with the order by: (1) referencing environmental protection goals and objectives and identifying strategies and timetables for attaining them; (2) providing the overall framework for the design and implementation of the Y-12 Environmental Protection Program; and (3) assigning responsibilities for complying with the requirements of the order. The EPPIP is revised and updated annually
Environmental Protection Versus Foundry Engineering Practice
Maj M.; Werrtz J.; Piekło J.
2017-01-01
• Theory and practice of environmental protection in the case of foundries in Europe and Asia • Experience resulting from the cooperation with the foundries in a few European countries, China and India • Phenomena and factors affecting the pollution of the natural environment and the implementation of measures aiming at the environmental protection. Every specialist dealing with foundry processes and their impact on environmental pollution must have encountered in their professional careers n...
Globalisation and National Incentives for Protecting Environmental Goods
Alkuin Kölliker
2004-01-01
This article tries to explain national incentives for protecting environmental goods either autonomously or collectively; it explores how globalisation has affected those incentives; and it suggests how national environmental policy might respond so as to ensure its effectiveness. The central argument is that national incentives for environmental protection may to a considerable extent be explained by a combination of the type of environmental good to be protected (in terms of public goods th...
Directory of Open Access Journals (Sweden)
Emeka Polycarp Amechi
2010-09-01
Full Text Available Poverty has been identified as the main cause and consequence of environmental degradation in Africa . It follows that if poverty is the main cause of environmental degradation in Africa , then policies, programmes and legal provisions designed to protect the environment in the region will be unsuccessful without a significant improvement in the living standards, wellbeing and livelihoods of the poor. In the same breath, since poverty is a consequence of environmental degradation, then the protection of the environment is critical to the achievement of poverty reduction initiatives such as the Millennium Development Goals in Africa . Hence, it can be argued that there is a mutual relationship between the achievement of environmental protection and reduction of poverty in Africa . This article therefore examines the extent to which the various regional legal instruments for the protection of the environment in Africa recognise this mutual linkage by providing for the promotion of poverty reduction and socio-economic development as integral aspect of their objective of ensuring the protection of the environment in the region.
Material for radioactive protection
Taylor, R.S.; Boyer, N.W.
A boron containing burn resistant, low-level radiation protection material useful, for example, as a liner for radioactive waste disposal and storage, a component for neutron absorber, and a shield for a neutron source is described. The material is basically composed of borax in the range of 25 to 50%, coal tar in the range of 25 to 37.5%, with the remainder being an epoxy resin mix. A preferred composition is 50% borax, 25% coal tar and 25% epoxy resin. The material is not susceptible to burning and is about 1/5 the cost of existing radiation protection material utilized in similar applications.
The application of recycled aluminum and plastics in environmental protection
Directory of Open Access Journals (Sweden)
G. Tepić
2013-07-01
Full Text Available Environmental protection is a serious problem facing the modern world. Precisely for this reason, in this work, the authors explore its different aspects. From the perspective of conservation of natural resources and energy savings, the replacement of primary materials through recycling is explored as a potential solution in the elementary processes related to the parasol production. Such parasols would be used in designing “urban forest” solutions, which significantly contribute to the protection of the planet from global warming, as well as the preservation of life and survival.
Environmental radiation protection - a brief history
International Nuclear Information System (INIS)
Zapantis, A.P.
2003-01-01
The effects of ionising radiation on man has been studied intensely for decades, and the system of radiation protection for man has been continually refined in the light of those studies. That system assumes that if man is protected, non-human biota at the species level will also be adequately protected. However, an increasing recognition of the need to protect the environment, and international agreements signed in 1992, have resulted in that paradigm being questioned, with the onus shifting slowly towards demonstrating that the environment is protected. Further, radiation protection agencies and environmental protection agencies around the world have now started considering the issue of developing a system of radiation protection for the environment. The International Commission on Radiological Protection (ICRP) and the International Atomic Energy Agency (IAEA) are also active in this area. The purpose of this paper is to briefly outline some of the issues confronting environmental and radiation protection specialists, and to mention some of the initiatives being taken by the international community to resolve those issues
EG and G Idaho environmental protection implementation plan
International Nuclear Information System (INIS)
Stump, R.C.
1989-11-01
This report describes the EG ampersand G Idaho strategy for implementation of the Department of Energy (DOE) Order 5400.1 (a DOE-Headquarters directive establishing environmental protection program requirements, authorities, and responsibilities). Preparation of this Environmental Protection Implementation Plan is a requirement of DOE Order 5400.0 Additionally, this report is intended to supplement the Department of Energy -- Idaho Operations Office (DOE-ID) Environmental Protection Implementation Plan by detailing EG ampersand G Idaho Environmental Protection Program activities. This report describes the current status of the EG ampersand G Idaho Program, and the strategies for enhancing, as necessary, the current program to meet the requirements of DOE Order 5400.1. Aspects of the Environmental Protection Program included in this report are the assignment of responsibilities to specific EG ampersand G organizations, a schedule for completion of enhancements, if necessary, and requirements for documentation and reporting. 3 figs., 1 tab
The physical protection of nuclear material
International Nuclear Information System (INIS)
1989-12-01
A Technical Committee on Physical Protection of Nuclear Material met in April-May 1989 to advise on the need to update the recommendations contained in document INFCIRC/225/Rev.1 and on any changes considered to be necessary. The Technical Committee indicated a number of such changes, reflecting mainly: the international consensus established in respect of the Convention on the Physical Protection of Nuclear Material; the experience gained since 1977; and a wish to give equal treatment to protection against the theft of nuclear material and protection against the sabotage of nuclear facilities. The recommendations presented in this IAEA document reflect a broad consensus among Member States on the requirements which should be met by systems for the physical protection of nuclear materials and facilities. 1 tab
Marble, Elizabeth
1996-01-01
Hypersonic spacecraft reentering the earth's atmosphere encounter extreme heat due to atmospheric friction. Thermal Protection System (TPS) materials shield the craft from this searing heat, which can reach temperatures of 2900 F. Various thermophysical and optical properties of TPS materials are tested at the Johnson Space Center Atmospheric Reentry Materials and Structures Evaluation Facility, which has the capability to simulate critical environmental conditions associated with entry into the earth's atmosphere. Emissivity is an optical property that determines how well a material will reradiate incident heat back into the atmosphere upon reentry, thus protecting the spacecraft from the intense frictional heat. This report describes a method of measuring TPS emissivities using the SR5000 Scanning Spectroradiometer, and includes system characteristics, sample data, and operational procedures developed for arc-jet applications.
Listed installations for environmental protection in hospitals
International Nuclear Information System (INIS)
Mullot, J.U.; Chaulet, J.F.; Thual, A.; Lafon, M.
1999-01-01
This work deals with the implications of different French rules and regulations concerning the environmental protection in hospitals. A special place is given to listed installations for environmental protection, because of their importance. A summary of important regulatory texts is presented concerning these installations, and also an inventory of installations or activities concerned, and the definition of the necessary procedures. Some ideas are also given about the much needed creation of an 'environmental network' inside hospitals, in order to cope with these concerns. Then, we briefly deal with more recent developments concerning the environmental protection, which will, no doubt, extend to hospitals, such as the French water law, air law, and procedures for the management of medical waste. Finally, the stakes of environmental decisions in hospitals and the chemist's place in these decisions are debated. (authors)
Physical protection of nuclear material
International Nuclear Information System (INIS)
1975-01-01
Full text: An Advisory Group met to consider the up-dating and extension of the Recommendations for the Physical Protection of Nuclear Material, produced in 1972. Twenty-seven experts from 11 countries and EURATOM were present. Growing concern has been expressed in many countries that nuclear material may one day be used for acts of sabotage or terrorism. Serious attention is therefore being given to the need for States to develop national systems for the physical protection of nuclear materials during use, storage and transport throughout the nuclear fuel cycle which should minimize risks of sabotage or theft. The revised Recommendations formulated by the Advisory Group include new definitions of the objectives of national systems of physical protection and proposals for minimizing possibilities of unauthorized removal and sabotage to nuclear facilities. The Recommendations also describe administrative or organizational steps to be taken for this purpose and the essential technical requirements of physical protection for various types and locations of nuclear material, e.g., the setting up of protected areas, the use of physical barriers and alarms, the need for security survey, and the need of advance arrangements between the States concerned in case of international transportation, among others. (author)
Materials, processes, and environmental engineering network
White, Margo M.
1993-01-01
The Materials, Processes, and Environmental Engineering Network (MPEEN) was developed as a central holding facility for materials testing information generated by the Materials and Processes Laboratory. It contains information from other NASA centers and outside agencies, and also includes the NASA Environmental Information System (NEIS) and Failure Analysis Information System (FAIS) data. Environmental replacement materials information is a newly developed focus of MPEEN. This database is the NASA Environmental Information System, NEIS, which is accessible through MPEEN. Environmental concerns are addressed regarding materials identified by the NASA Operational Environment Team, NOET, to be hazardous to the environment. An environmental replacement technology database is contained within NEIS. Environmental concerns about materials are identified by NOET, and control or replacement strategies are formed. This database also contains the usage and performance characteristics of these hazardous materials. In addition to addressing environmental concerns, MPEEN contains one of the largest materials databases in the world. Over 600 users access this network on a daily basis. There is information available on failure analysis, metals and nonmetals testing, materials properties, standard and commercial parts, foreign alloy cross-reference, Long Duration Exposure Facility (LDEF) data, and Materials and Processes Selection List data.
Local environmental conditions and the stability of protective layers on steel surfaces
Energy Technology Data Exchange (ETDEWEB)
Jensen, J P [Technical Univ. of Denmark, Lyngby (Denmark); Bursik, A
1996-12-01
Local environmental conditions determine whether the protective layers on steel surfaces are stable. With unfavorable local environmental conditions, the protective layers may be subject to damage. Taking the cation conductivity of all plant cycle streams <0.2 {mu}S/cm for granted, an adequate feed-water and - if applicable - boiler water conditioning is required to prevent such damage. Even if the mentioned conditions are met in a bulk, the local environmental conditions may be inadequate. The reasons for this may be the disregarding of interactions among material, design, and chemistry. The paper presents many possible mechanisms of protective layer damage that are directly influenced or exacerbated by plant cycle chemistry. Two items are discussed in more detail: First, the application of all volatile treatment for boiler water conditioning of drum boiler systems operating at low pressures and, second, the chemistry in the transition zone water/steam in the low pressure turbine. The latter is of major interest for the understanding and prevention of corrosion due to high concentration of impurities in the aqueous liquid phases. This is a typical example showing that local environmental conditions may fundamentally differ from the overall bulk chemistry. (au) 19 refs.
Nano-scale Materials and Nano-technology Processes in Environmental Protection
International Nuclear Information System (INIS)
Vissokov, Gh; Tzvetkoff, T.
2003-01-01
A number of environmental and energy technologies have benefited substantially from nano-scale technology: reduced waste and improved energy efficiency; environmentally friendly composite structures; waste remediation; energy conversion. In this report examples of current achievements and paradigm shifts are presented: from discovery to application; a nano structured materials; nanoparticles in the environment (plasma chemical preparation); nano-porous polymers and their applications in water purification; photo catalytic fluid purification; hierarchical self-assembled nano-structures for adsorption of heavy metals, etc. Several themes should be considered priorities in developing nano-scale processes related to environmental management: 1. To develop understanding and control of relevant processes, including protein precipitation and crystallisation, desorption of pollutants, stability of colloidal dispersion, micelle aggregation, microbe mobility, formation and mobility of nanoparticles, and tissue-nanoparticle interaction. Emphasis should be given to processes at phase boundaries (solid-liquid, solid-gas, liquid-gas) that involve mineral and organic soil components, aerosols, biomolecules (cells, microbes), bio tissues, derived components such as bio films and membranes, and anthropogenic additions (e.g. trace and heavy metals); 2. To carry out interdisciplinary research that initiates Noel approaches and adopts new methods for characterising surfaces and modelling complex systems to problems at interfaces and other nano-structures in the natural environment, including those involving biological or living systems. New technological advances such as optical traps, laser tweezers, and synchrotrons are extending examination of molecular and nano-scale processes to the single-molecule or single-cell level; 3. To integrate understanding of the roles of molecular and nano-scale phenomena and behaviour at the meso- and/or macro-scale over a period of time
Environmental materials and interfaces
International Nuclear Information System (INIS)
1991-11-01
A workshop that explored materials and interfaces research needs relevant to national environmental concerns was conducted at Pacific Northwest Laboratory. The purposes of the workshop were to refine the scientific research directions being planned for the Materials and Interface Program in the Molecular Science Research Center (MSRC) and further define the research and user equipment to the included as part of the proposed Environmental and Molecular Science Laboratory (EMSL). Three plenary information sessions served to outline the background, objectives, and status of the MSRC and EMSL initiatives; selected specific areas with environmentally related materials; and the status of capabilities and facilities planned for the EMSL. Attention was directed to four areas where materials and interface science can have a significant impact on prevention and remediation of environmental problems: in situ detection and characterization of hazardous wastes (sensors), minimization of hazardous waste (separation membranes, ion exchange materials, catalysts), waste containment (encapsulation and barrier materials), and fundamental understanding of contaminant transport mechanisms. During all other sessions, the participants were divided into three working groups for detailed discussion and the preparation of a written report. The working groups focused on the areas of interface structure and chemistry, materials and interface stability, and materials synthesis. These recommendations and suggestions for needed research will be useful for other researchers in proposing projects and for suggesting collaborative work with MSRC researchers. 1 fig
Protection of industrial and business secrets in environmental protection law
International Nuclear Information System (INIS)
Breuer, R.
1986-01-01
The author investigates the relation between environmental protection and data protection, especially concerning the protection of industrial and business secrets. For this kind of conflict there are only general administrative and procedural provisions with little systematic order. Special provisions of data protection covering all aspects of industrial and business secrets, as for example in social or tax law, do not exist in German law until now. (WG) [de
Perspectives for environmental radiation protection in EU radiation protection legislation
International Nuclear Information System (INIS)
Janssens, A.
2000-01-01
The basis of EU radiation protection legislation is the EURATOM Trealy. It is discussed whether the Treaty offers a legal basis for the protection of the natural environment. The incorporation of provisions pertaining to the nuclear fuel cycle or to radioactive substances in general environmental legislation is explained, as well as the possible implications of international conventions subscribed by the European Union. The European Commission is in the process of developing an overall approach to risk analysis for the protection of health, consumer interests, and the environment. It is examined to what extent the consideration of the impact of radiation on the natural environment fits in the overall framework and whether the principles underlying classical radiation protection are applicable to biota. Specific attention is given to situations where high levels of environmental radioactivity would require intervention. (Author)
Conflict Between Economic Growth and Environmental Protection
Energy Technology Data Exchange (ETDEWEB)
Czech, Bryan
2012-01-09
The conflict between economic growth and environmental protection may not be reconciled via technological progress. The fundamentality of the conflict ultimately boils down to laws of thermodynamics. Physicists and other scholars from the physical sciences are urgently needed for helping the public and policy makers grasp the conflict between growth and environmental protection.
Environmental protection and competition policy
International Nuclear Information System (INIS)
Mehrlaender, H.
1993-01-01
The area 'Environmental protection and competition policy' follows the introductory guideline by Sir Leon Brittan, vice-president of the EC-Commission: 'We must seek the most market driven, dynamic approach to solutions, such that competition and technological advance bring the maximum economic and environmental benefits'. From this concrete measures are derived. (HSCH) [de
Economy and environmental protection. Wirtschaft und Umweltschutz
Energy Technology Data Exchange (ETDEWEB)
Dreyhaupt, F.J.; Geissler, A.; Hausmann, K.; Hulpke, H.; Kunert, K.H.; Markmann, H.; Massing, H.; Seeliger, J.; Storm, P.C.
1986-01-01
The meeting on the topic of 'Economy and environmental Protection' was held at the end of 1985 in the 'German Academy of Judges'. The book contains a major part of the lectures held there. The aim of the meeting was to gain insight into the pollution of the environment due to industry and into the maximum limits of pollution which the environment can bear. Among others, the lectures deal with the following questions: what effects do the environmental protection measures have upon the safeguarding of jobs. Do economical development on one hand, and environmental protection on the other, really represent such a big conflict of interests which will never be solved. Which problems arise e.g. from water pollution abatement, from mining and firing of hard coal, from offences involving environmental damage. (HSCH).
EG and G Idaho Environmental Protection Implementation Plan (1990)
Energy Technology Data Exchange (ETDEWEB)
Wickham, L.E.
1990-11-01
This report describes the EG G Idaho strategy for implementation of the Department of Energy (DOE) Order 5400.1 (a DOE-Headquarters directive establishing environmental protection program requirements, authorities, and responsibilities). Preparation of this Environmental Protection Implementation Plan is a requirement of DOE Order 5400.1. Additionally, this report is intended to supplement the Department of Energy--Idaho Operations Office (DOE-ID) Environmental Protection Implementation Plan by detailing EG G Idaho Environmental Protection Program activities. This report describes the current status of the EG G Idaho program, and the strategies for enhancing, as necessary, the current program to meet the requirements of DOE Order 5400.1. Aspects of the Environmental Protection Program included in this report are the assignment of responsibilities to specific EG G organizations, a schedule for completion of enhancements, if necessary, and requirements for documentation and reporting. 4 figs., 1 tab.
EG and G Idaho Environmental Protection Implementation Plan (1991)
Energy Technology Data Exchange (ETDEWEB)
Graham, J.F.
1991-11-01
This report describes the EG G Idaho, Inc. strategy for implementation of the Department of Energy (DOE) Order 5400.1 (a DOE-Headquarters directive establishing environmental protection program requirements, authorities, and responsibilities). Preparation of this Environmental Protection Implementation Plan is a requirement of DOE Order 5400.1. Additionally, this report is intended to supplement the Department of Energy -- Field Office Idaho (DOE-ID) Environmental Protection Implementation Plan by detailing EG G Idaho Environmental Protection Program activities. This report describes the current status of the EG G Idaho Program, and the strategies for enhancing, as necessary, the current program to meet the requirements of DOE Order 5400.1. Aspects of the Environmental Protection Program included in this report are the assignment of responsibilities to specific EG G Idaho organizations, a schedule for completion of enhancements, if necessary, and requirements for documentation and reporting. 4 figs., 1 tab.
EG and G Idaho Environmental Protection Implementation Plan (1991)
International Nuclear Information System (INIS)
Graham, J.F.
1991-11-01
This report describes the EG ampersand G Idaho, Inc. strategy for implementation of the Department of Energy (DOE) Order 5400.1 (a DOE-Headquarters directive establishing environmental protection program requirements, authorities, and responsibilities). Preparation of this Environmental Protection Implementation Plan is a requirement of DOE Order 5400.1. Additionally, this report is intended to supplement the Department of Energy -- Field Office Idaho (DOE-ID) Environmental Protection Implementation Plan by detailing EG ampersand G Idaho Environmental Protection Program activities. This report describes the current status of the EG ampersand G Idaho Program, and the strategies for enhancing, as necessary, the current program to meet the requirements of DOE Order 5400.1. Aspects of the Environmental Protection Program included in this report are the assignment of responsibilities to specific EG ampersand G Idaho organizations, a schedule for completion of enhancements, if necessary, and requirements for documentation and reporting. 4 figs., 1 tab
The Physical Protection of Nuclear Material
International Nuclear Information System (INIS)
1993-09-01
Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international cooperation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and materials, particularly when such materials are transported across national frontiers [es
The Physical Protection of Nuclear Material
International Nuclear Information System (INIS)
1993-09-01
Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international cooperation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and materials, particularly when such materials are transported across national frontiers [fr
The Physical Protection of Nuclear Material
International Nuclear Information System (INIS)
1993-01-01
Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international cooperation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and materials, particularly when such materials are transported across national frontiers
The Physical Protection of Nuclear Material
International Nuclear Information System (INIS)
1993-09-01
Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international cooperation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and materials, particularly when such materials are transported across national frontiers
Environmental futures research at the U.S. Environmental Protection Agency
Robert L. Olson
2012-01-01
Relatively little research on environmental futures has been carried out in the United States. An exception is the long-running futures research that the U.S. Environmental Protection Agency (EPA) has been conducting since the 1970s. This paper reviews past and current efforts toward developing a capacity for environmental foresight within the EPA, and discusses some...
Environmental Protection and Value Creation
Directory of Open Access Journals (Sweden)
Faizah Darus
2016-01-01
Full Text Available The managers of corporations can play a significant role to protect the natural environment. This study aims to examine the environmental disclosure of 200Shariah compliant companies for 2013 and the subsequent effect of such disclosure for the organizations. The results of content analyses of the annual reports revealed that managers from the Plantation industry disclosed more environmental information. The regression analysis revealed a significant relationship between environmental information provided and the subsequent value created for the organizations. The findings of the study can help managers to position better their environmental strategy to enhance the overall value of their organizations.
Method of manufacturing neutron protection materials
Energy Technology Data Exchange (ETDEWEB)
Kakibana, Hidetake; Okamoto, Masazane; Fujii, Yasuhiko; Koguchi, Noboru; Takesute, Morito; Miyamatsu, Tokuhisa
1985-06-22
To obtain protection materials easily moldable, flexible and capable of minimizing the workers' neutron exposure dose, a fine fiberous assembly is prepared by dispersing compounds of atoms having neutron absorbing performance such as Li or B, for example, finely powderous compounds of LiF or /sup 6/LiF into a solution of spinnable polymer, particularly, polyolefin polymer such as polyethylene in CH/sub 2/Cl and then flash spinning them. The fine fibers are fabricated into mat-like material, blankets, cloths and the likes for use in neutron exposure protection. In the case of neutron irradiation therapy, protection materials of reduced weight, flexible and giving preferred contact with human body can be obtained with ease for protecting the regions other than the lesion area.
Environmental Regulation and Food Safety: Studies of Protection ...
International Development Research Centre (IDRC) Digital Library (Canada)
Environmental Regulation and Food Safety: Studies of Protection and Protectionism. Book cover Environmental Regulation and Food Safety: Studies of Protection and Protectionism. Directeur(s) : Veena Jha. Maison(s) d'édition : Edward Elgar, IDRC. 1 janvier 2006. ISBN : 184542512X. 250 pages. e-ISBN : 155250185X.
Practical approach to environmental protection in the exploration and production industry
International Nuclear Information System (INIS)
Emmons, L.N.
1994-01-01
Environmental protection is a major issue throughout the world. Effective environmental protection techniques exist that are simple, creative, practical, and often cost effective. The cornerstone of cost effective environmental protection is an environmental management system. Various techniques are also available for reducing wastes, minimizing spills, remediating soils, reducing air emissions, and protecting groundwater and surface water in exploration and production operations
EC Competition law and environmental protection
Energy Technology Data Exchange (ETDEWEB)
Rantala, M.
1996-12-31
Due to the increasing attention paid on environmental protection, by the European Community, the Member States and the consumers, undertakings are forced to adjust their policies to meet the new demands posed by public authorities and the market. This has an inevitable impact on competition. No matter how acceptable the goals were, the means are to be assessed also from the competition law point of view. The objective of this study is to analyze the situations where conflicts may take place, the main sources of research being the principles of law relating to the Treaty ,the judgements of the European Court of Justice, the Commission Decisions and other official documents of the Community as well as legal literature. This study classifies the Community and Member State instruments which are used for environmental protection into four categories. These are legislative, market-based, horizontal and financial supporting instruments. Undertakings` environmental practices, which are capable of affecting competition, are examined under Articles 85 and 86 EC, some attention being paid also to Article 90 EC. The touching points of competition policy and environmental protection in such cases are scrutinized under three headings. These are the two, in this case, most relevant public instruments, ie. legislative and market-based measures, and the voluntary actions of undertakings. (42 refs.)
Administrative and economic tools of environmental protection
Staničová, Anna
2010-01-01
This diploma thesis deals with administrative and economic instruments of environmental protection, which represent the most important groups of instruments of environmental protection. Administrative and economic instruments are means and methods that affect human behavior in relation to environment. The thesis is systematically divided into two main parts and each of them is subdivided into chapters and subchapters. The first part of the thesis is focused generally and provides overview of ...
The determination of technetium-99 in environmental materials
International Nuclear Information System (INIS)
Harvey, B.R.; Ibbett, R.D.; Williams, K.J.; Lovett, M.B.
1991-01-01
The Aquatic Environment Protection Division of the Directorate of Fisheries Research (DFR), Lowestoft carries out analyses, on a routine basis, for a considerable range of radionuclides in a wide variety of environmental materials. Technetium-99 is included in the list of radionuclides for which analysis is regularly carried out as part of the DFR monitoring programme. Its determination is inevitably somewhat labour-intensive and over the years the procedures used have changed to accommodate increasing demands for information on the environmental behaviour of the nuclide. Reliable analytical procedures for the radiochemical separation and assaying of 99 Tc are thus important. Radiometric and gravimetric analyses described in this publication have been developed over a substantial period of time and have given excellent results in international intercomparison exercises. (author)
International Nuclear Information System (INIS)
Serve, C.
1992-01-01
On the basis of an enquiry, the Stuttgart Chamber of Industry and Commerce produced a database of the services offered by regional and supraregional companies in the field of environmental protection. The data are presented in this manual, classified as follows: noise protection systems; sanitation systems and services; other systems and services. (orig.) [de
Organizational and legal mechanism of the environmental protection
Directory of Open Access Journals (Sweden)
А. П. Гетьман
2014-12-01
Full Text Available Organizational and legal mechanisms of environmental protection are defined by the author of the article as a mechanism of organization and system of activities of state executive power bodies and local self-government bodies in the field of environmental public relations arising in connection with environmental protection and environmental safety provision. The rules of administrative law are its legal basis, alongside with the norms of environmental law. The former designed to reflect the specifics of the subject, objects, subjects and principles of legal regulation of social relations in this area. The latter define common goals, objectives and functions of state public relations management nature.
Environmental Protection in Indian Country
EPA's efforts to protect human health and the environment of federally recognized Indian tribes by supporting implementation of federal environmental laws consistent with the federal trust responsibility, and the government-to-government relationship.
A Road map for Establishing the Physical Protection Regime of Nuclear Materials and Facilities
International Nuclear Information System (INIS)
Yoo, Ho-Sik; Kwak, Sung-Woo; Jang, Sung-Soon; Kim, Jae-Kwang; Kim, Jung-Soo; Yoon, Wan-Ki
2007-01-01
The importance of physical protection for nuclear materials and facilities that can be an objective for terrorists has never been more stressed. The responsibility for physical protection within a State does not rest entirely with that state because cross-border transactions related to nuclear materials increase as nuclear related industries expand. The international community has prepared measures to strengthen the regime of physical protection such as the IAEA's proposal of the 'Nuclear Security Plan for 2006-2009' and UN's resolution on 'the International Convention for the Suppression of Acts of Nuclear Terrorism'. In order to cope with this, Korea has also made efforts to establish the implementation system for physical protection in the field of nuclear industries since the law for Physical Protection of Nuclear Material and Facility and Radiological Emergency Preparedness (LPPREP) was promulgated in 2004. The detailed plans should be prepared to accomplish this. This study has been performed to derive the items for establishing the regime of physical protection. The items derived were classified as short, mid and long-term depending on their characteristics and environmental circumstances. The regime of national physical protection will be established if the studies on these items are carried out successfully and tangible results are obtained
Environmental performances of gas pipe materials
International Nuclear Information System (INIS)
Van Nifterik, G.
1996-01-01
In constructing new gas pipelines energy distribution companies are increasingly dealing with the question of which material has the lowest environmental impact. Gastec (Dutch gas research institute) and the 'Centrum voor Milieukunde Leiden' (Centre for Environmental Studies of the University of Leiden) studied and compared the environmental aspects of such materials. The study concerns the entire life cycle from raw materials production through digging and welding or fusion joining to the moment the materials are discarded as waste. 2 figs
What the new EPA (Environmental Protection Agency) rules mean
Energy Technology Data Exchange (ETDEWEB)
Mishkin, A.E.; Friedland, D.M.
1990-02-01
The Environmental Protection Agency has issued its first proposed New Source Performance Standards for municipal incinerators in 18 years. EPA's 1971 NSPS set only particulate limits. The new NSPS also sets combustion standards, acid gas and dioxin emission limits, and a materials separation requirement. The latest NSPS, plus proposed emission guidelines for existing facilities, both regulate municipal waste combustors (MWCs) under the Clean Air Act. They both contain new emission limitations for the various pollutants emitted by MWCs, and materials separation requirements. The emission limitations, and the control technologies on which they are based, are different for different size facilities. The proposed regulations also contain operating requirements, testing and record-keeping provisions, and requirements for operator certification and training. The New Source Performance Standards are summarized. The emission guidelines for existing facilities are then described. These include: best demonstrated technology, combustion controls, and materials separation.
Economic growth - environmental protection - quality of life
International Nuclear Information System (INIS)
Kumm, J.
1975-01-01
This is an investigation into the assumption that uncontrolled economic growth puts a burden on the natural environment and lowers the quality of life. This analysis of the natural, technical, economic, and social environment answers the following questions: 1) which development will production and consumption take up to the year 2000; 2) extent of environmental burden to be expected as a result thereof; 3) influence of needs and valid standard of values thus prevailing; 4) administrative measures for environmental policies; 5) influence of environmental policies on the quality of life; 6) possibility of economic growth while the natural environment is sufficiently protected at the same time. The man-environment model presented elucidates the interrelations between economic development and the natural and social environment; it checks the effectiveness of alternate environmental protection measures. (HP) [de
Advanced Carbon Materials for Environmental and Energy Applications
Dua, Rubal
2014-01-01
Carbon based materials, including porous carbons and carbon layer composites, are finding increased usage in latest environmental and energy related research. Among porous carbon materials, hierarchical porous carbons with multi-modal porosity are proving out to be an effective solution for applications where the traditional activated carbons fail. Thus, there has been a lot of recent interest in developing low-cost, facile, easy to scale-up, synthesis techniques for producing such multi-modal porous carbons. This dissertation offers two novel synthesis techniques: (i) ice templating integrated with hard templating, and (ii) salt templating coupled with hard templating, for producing such hierarchically porous carbons. The techniques offer tight control and tunability of porosity (macro- meso- and microscale) in terms of both size and extent. The synthesized multi-modal porous carbons are shown to be an effective solution for three important environment related applications – (i) Carbon dioxide capture using amine supported hierarchical porous carbons, (ii) Reduction in irreversible fouling of membranes used for wastewater reuse through a deposition of a layer of hierarchical porous carbons on the membrane surface, (iii) Electrode materials for electrosorptive applications. Finally, because of their tunability, the synthesized multi-modal porous carbons serve as excellent model systems for understanding the effect of different types of porosity on the performance of porous carbons for these applications. Also, recently, there has been a lot of interest in developing protective layer coatings for preventing photo-corrosion of semiconductor structures (in particular Cu2O) used for photoelectrochemical water splitting. Most of the developed protective strategies to date involve the use of metals or co-catalyst in the protective layer. Thus there is a big need for developing low-cost, facile and easy to scale protective coating strategies. Based on the expertise
Advanced Carbon Materials for Environmental and Energy Applications
Dua, Rubal
2014-05-01
Carbon based materials, including porous carbons and carbon layer composites, are finding increased usage in latest environmental and energy related research. Among porous carbon materials, hierarchical porous carbons with multi-modal porosity are proving out to be an effective solution for applications where the traditional activated carbons fail. Thus, there has been a lot of recent interest in developing low-cost, facile, easy to scale-up, synthesis techniques for producing such multi-modal porous carbons. This dissertation offers two novel synthesis techniques: (i) ice templating integrated with hard templating, and (ii) salt templating coupled with hard templating, for producing such hierarchically porous carbons. The techniques offer tight control and tunability of porosity (macro- meso- and microscale) in terms of both size and extent. The synthesized multi-modal porous carbons are shown to be an effective solution for three important environment related applications – (i) Carbon dioxide capture using amine supported hierarchical porous carbons, (ii) Reduction in irreversible fouling of membranes used for wastewater reuse through a deposition of a layer of hierarchical porous carbons on the membrane surface, (iii) Electrode materials for electrosorptive applications. Finally, because of their tunability, the synthesized multi-modal porous carbons serve as excellent model systems for understanding the effect of different types of porosity on the performance of porous carbons for these applications. Also, recently, there has been a lot of interest in developing protective layer coatings for preventing photo-corrosion of semiconductor structures (in particular Cu2O) used for photoelectrochemical water splitting. Most of the developed protective strategies to date involve the use of metals or co-catalyst in the protective layer. Thus there is a big need for developing low-cost, facile and easy to scale protective coating strategies. Based on the expertise
Utilization of Zeolites in environmentally protection
Energy Technology Data Exchange (ETDEWEB)
Kallo, D. [Hungarian Academy of Sciences, Chemical Research Center, Institute of Chemistry, Budapest (Hungary)
2000-07-01
It has been attempted to present the most important fields of natural zeolite applications in environmental protection. Realized and approved utilizations were demonstrated inciting the reader to take these materials into consideration for solution of similar problems. The outlined properties can be used for other purposes not discussed in this review. They can be applied, e.g., in fish farming, transportation of living fishes when simultaneous ammonium and carbon dioxide removals is required: ammonium is exchanged for calcium present in the zeolite and CO{sub 2} is then precipitated in the form of CaCO{sub 3}; in treatment of diluted manure when undesired organics can be fixed and bactericide effects can be attained. Natural zeolites are used, therefore, as deodorant of litter of dogs or cats. Small amounts of metal cations, e.g., Cu{sup 2+}, Ag{sup +} or Zn{sup 2+}, introduced by ion exchange may disinfect contacting water. Due to water adsorption and desorption capability natural zeolite as construction materials exert some conditioning effect without any mechanical accessory. It seems likely the human ingenuity will continue to discover new applications in the future.
Physical protection of radioactive material in transport
International Nuclear Information System (INIS)
1975-01-01
Safety in the transport of radioactive material is ensured by enclosing the material, when necessary, in packaging which prevents its dispersal and which absorbs to any adequate extent any radiation emitted by the material. Transport workers, the general public and the environment are thus protected against the harmful effects of the radioactive material. The packaging also serves the purpose of protecting its contents against the effects of rough handling and mishaps under normal transport conditions, and against the severe stresses and high temperatures that could be encountered in accidents accompanied by fires. If the radioactive material is also fissile, special design features are incorporated to prevent any possibility of criticality under normal transport conditions and in accidents. The safe transport requirements are designed to afford protection against unintentional opening of packages in normal handling and transport conditions and against damage in severe accident conditions; whereas the physical protection requirements are designed to prevent intentional opening of packages and deliberate damage. This clearly illustrates the difference in philosophical approach underlying the requirements for safe transport and for physical protection during transport. This difference in approach is, perhaps, most easily seen in the differing requirements for marking of consignments. While safety considerations dictate that packages be clearly labelled, physical protection considerations urge restraint in the use of special labels. Careful consideration must be given to such differences in approach in any attempt to harmonize the safety and physical protection aspects of transport. (author)
The Property Right and the Requirements of Environmental Protection
Directory of Open Access Journals (Sweden)
Vasilica NEGRUŢ
2014-11-01
Full Text Available The environmental protection has lately become an essential component of the concept of sustainable development, along with the economic, social and cultural components. Being an objective of public interest, the environmental protection and conservation are essential to ensure the habitat necessary for continuing the human existence. Considering this aspect, the limitation of ownership required by certain laws has both a social and moral justification, the environmental protection having a direct link with the level of public health, which is a value of national interest. The legal limits of the ownership are restrictions brought by the law, considering aspects regarding the general interest of society. In this article we intend to emphasize, on the analysis and comparison of legislation and case law, the nature of the relationship between ownership of property and environmental rights, as well as the limitations of property rights in favor of environmental protection. As a conclusion, the environmental easements meet a wide national and international recognition and guarantee, the holder of the property having to exercise it in the interest of the whole community, including the protection and conservation of the environment. At the same time, we must consider that the right to property and environment are fundamental rights guaranteed by the Romanian Constitution itself, which makes us conclude that they converge and mutually enrich across the fundamental duties as well.
Reports from the Bavarian Office for Environmental Protection (4)
International Nuclear Information System (INIS)
1991-01-01
This issue, No. 108, contains the 1990 annual report of the Bavarian Environmental Office, as well as contributions on the subjects of environmental protection, radiation protection, noise abatement, waste management and conservations. Several contributions have been recorded separately in this database. (BBR) [de
Energy Technology Data Exchange (ETDEWEB)
NONE
1995-10-01
This report documents an evaluation of the environmental, economic, and energy impacts of material recovery facilities (MRFs) conducted under the Municipal Solid Waste Innovative Technology Evaluation (MITE) Program. The MITE Program is sponsored by the US Environmental Protection Agency to foster the demonstration and development of innovative technologies for the management of municipal solid waste (MSW). This project was also funded by the National Renewable Energy Laboratory (NREL). Material recovery facilities are increasingly being used as one option for managing a significant portion of municipal solid waste (MSW). The owners and operators of these facilities employ a combination of manual and mechanical techniques to separate and sort the recyclable fraction of MSW and to transport the separated materials to recycling facilities.
Environmental protection and employment: the link for a worthwhile future
Energy Technology Data Exchange (ETDEWEB)
NONE
1998-12-31
Driven by increasing environmental awareness as well as numerous environmental policy measures, the market for environmental goods has expanded over the last few years, bringing a growing number of jobs. A study of leading German economics research institutes shows that the employment effects of environmental protection have attained considerable dimensions, with nearly a million jobs in 1994 alone, with the service sector being the main beneficiary. And of particular importance: In terms of both population and economic performance, the new Laender are in a better position than the old Laender (the former FRG states) in respect of environmental jobs. In the new Laender important impulses towards creating and safeguarding jobs have emerged from environmental clean-up and development. The concern of this publication is not to promise a job-creation miracle by means of environmental protection alone. Nor is it a matter of legitimising environmental protection in terms of employment policy, for environmental protection does not require employment policy for legitimisation. Rather, the paper wants to provide up-to-date background information to point out the synergies between environmental and employment objectives. It also presents fields of activity which can be helpful to address both environmental and employment policy problems. I do hope that this study can provide some incentives for further action. (orig.)
Inequality, Environmental Protection and Growth
Marsiliani, L.; Renstrom, T.I.
2000-01-01
Why do Scandinavian countries perform better in terms of environmental protection than other European Union countries? In this paper, we explore the hypothesis that societies characterised by low income inequality (such as the nordic European countries) generate political-economic equilibria where
FASSET - An European project for environmental protection
International Nuclear Information System (INIS)
Bruchertseifer, F.
2003-01-01
The European research project ''FASSET'' (Framework ASSessment of Enviromental ImpacT) will provide a framework of the environmental impact of the effects of ionising radiation and will identify protection aims for the environmental protection. This project represent a collaboration of different organisations from the European community: Sweden, Norway, Finland, Great Britain, Spain, France and Germany. The German participants are the GSF-research centre for environment and health and the German radiation protection office. The project is founded by the 5 th EC research programme. The existing national and international radiation protection regulations are focused to the humans. Other species, like plants and animals, are protected indirectly, if their habitat are close to urban areas or they represent a part of the food chain. The ICRP position ''if the man is protected, nature is protected as well'' is now under reconsideration by a ICRP-Taskgroup. The identification of perilled real reference organism by the FASSET-project is an working tool for the definition of the protection aims. For that purpose the project is divided into three working packages: dosimetry, exposure pathways and effects. Another working package is responsible for the developing of the concept using the results provided by the other working packages. (orig.)
International Nuclear Information System (INIS)
Setlow, L.W.
2002-01-01
Over the last 30 years the US Environmental Protection Agency (EPA) has conducted field, laboratory, and scientific literature studies on a variety of technologically enhanced naturally occurring radioactive materials. In doing so, EPA has recognized that the physical and chemical characteristics of these wastes and products can vary significantly, and the Agency is conducting detailed evaluations of these radioactive materials on an industry-by-industry basis. An example of the Agency's current efforts to characterize and assess the risks of these materials from the uranium mining industry in a technical report is presented along with information on EPA's current field and laboratory studies. (author)
Legal protection in French environmental law
International Nuclear Information System (INIS)
Fromont, M.
1983-01-01
The author presents a comparison of the French and the Federal German legal provisions providing for preliminary legal protection in connection with proceedings where protection of the environment is involved. The author also discusses proceedings in contentious administrative matters in connection with the licensing of the construction and operation of nuclear power plants, as well as the protection of the laws in subject matters concerning airborne pollution control and environmental protection in general. One of the most outstanding different features is the fact that in legal proceedings on administrative matters in France, protection of the existing legal system is the main issue rather than the protection of individual rights, as is the case in the Fed. Republic of Germany. (HP) [de
International environmental legislation; Internationales Umweltrecht
Energy Technology Data Exchange (ETDEWEB)
Proelss, Alexander (ed.) [Trier Univ. (Germany)
2017-07-01
The book on international environmental legislation includes the following contributions: Development, sources and actors concerning the international environmental legislation, cross-national environmental justice, principles of the international environmental legislation, environmental protection by lawsuit, environmental protection and human right, environmental protection and trading, responsibility and liability, peaceful settlement of disputes, climatic change, preservation and sustainable use of the biodiversity, protection of air and space, oceanic protection, protection of inland waters, protection of the Antarctic and Arctic environment, waste and hazardous materials legislation.
Feed Materials Production Center annual environmental report for calendar 1989
Energy Technology Data Exchange (ETDEWEB)
Dugan, T.A.; Gels, G.L.; Oberjohn, J.S.; Rogers, L.K.
1990-10-01
The mission of the Department of Energy's (DOE) Feed Materials Production Center (FMPC) has been to process uranium for United States' defense programs. On July 10, 1989, the FMPC suspended production operations, but remains on standby for certain segments of production. The FMPC also manages the storage of some radioactive and hazardous materials. As part of its operations, the FMPC continuously monitors the environment to determine that it is operating within federal and state standards and guidelines regarding emission of radioactive and nonradioactive materials. Data collected from the FMPC monitoring program are used to calculate estimates of radiation dose for residents due to FMPC operations. For 1989, the estimate of dose through the air pathway, excluding radon, indicated that people in the area were exposed to less than 6% of the DOE guideline established to protect the public from radiation exposure. When radon emissions are included, the dose from FMPC operations during 1989 was less than 22% of the annual background radiation dose in the Greater Cincinnati area. This report is a summary of FMPC's environmental activities and monitoring program for 1989. An Environmental Compliance Self-Assessment presents the FMPC's efforts to comply with environmental regulations through June 1990. 44 refs., 48 figs.
International Nuclear Information System (INIS)
Laner, David; Rechberger, Helmut
2007-01-01
The treatment of cooling appliances in Austria is primarily influenced by two factors. On the one hand is their changing composition and on the other hand the ordinance on Waste Prevention, Collection and Treatment of Waste Electrical and Electronic Equipment (WEEE ordinance), which stipulates a minimum recycling rate of 75% for cooling appliances. This paper investigates whether this recycling rate leads to optimal treatment practices for cooling appliances with respect to resource conservation and environmental protection. Two different treatment technologies which achieve recycling rates between 50-60% and 80-90%, respectively, are compared both for cooling appliances containing Chlorofluorocarbons (CFCs) and for appliances containing Volatile Organic Compounds (VOC). Materials and energy balances are developed for each model. To evaluate resource consumption, expenditures as well as savings of energy and materials are incorporated via the Cumulative Energy Demand (CED). In order to analyse the environmental impact of the different practices, balances for CFC, CO 2 , HF, HCl and solid residues are established. The results show that the treatment type aiming for a maximum of materials recycling contributes more to resource conservation than the other treatment type. But for CFC appliances the former is associated with substantial CFC emissions, which turn out to be most relevant when treating these appliances. Generally, it is found that the optimum recycling rate is a function of the composition of the appliance and the technologies applied, both in recycling and in primary production. A high recycling rate per se does not automatically result in an optimal solution with regard to resource conservation and environmental protection. (author)
THE PLACE OF ENVIRONMENTAL PROTECTION IN THE ...
African Journals Online (AJOL)
GTP to advocate better environmental protection in the country in the years ..... energy sector implies, inter alia, using clean energy such as solar and wind ..... accelerate growth; creating the balance between economic development and .... Establishment Proclamation No 575, and Radiation Protection Proclamation No 571.
Human Rights and the Environmental Protection: The Naïveté in Environmental Culture
Directory of Open Access Journals (Sweden)
Made Adhitya Anggriawan Wisadha
2018-05-01
Full Text Available There are growing trends in the human rights to substantially extend the values to protect the environment or moreover to welcome the ideas of the rights to environment, not to mention the rights of environment. The purpose is to inclusively embrace the environmental problems wherein the humanity challenges posited on, but this agenda may leave a room of doubt how far the human rights body can address the environmental destruction as it needs the interplay of culture and environmental ethics to promoting such concepts. Therefore, this paper aims to identify the justification of how human rights in the environmental protection in the contemporary discourse are bringing to light, as many current cases attempt to linkage the environmental approach to the human rights instrument, such as the rights to life, healthy environment, and intergenerational equity. To analyse further, the theoretical framework in this paper will be explicated by environmental culture paradigm which illustrates the egalitarian concept between human and environment to elicit the clear thoughts of how human rights is naïve to protect the environment. This article will firstly depict the human rights and the environmental protection discourse and then, explore the naïveté narratives of environmental culture about the ecological crisis roots that are fundamentally anthropogenic, as to reflect the ground realities how this nexus will play out. Finally, this paper found the moral justification per se relies on the effort of elaborating the human prudence in their relationship with nature, albeit bringing the naïveté.
Life cycle assessment (LCA of lead-free solders from the environmental protection aspect
Directory of Open Access Journals (Sweden)
Mitovski Aleksandra M.
2009-01-01
Full Text Available Life-cycle assessment (LCA presents a relatively new approach, which allows comprehensive environmental consequences analysis of a product system over its entire life. This analysis is increasingly being used in the industry, as a tool for investigation of the influence of the product system on the environment, and serves as a protection and prevention tool in ecological management. This method is used to predict possible influences of a certain material to the environment through different development stages of the material. In LCA, the product systems are evaluated on a functionally equivalent basis, which, in this case, was 1000 cubic centimeters of an alloy. Two of the LCA phases, life-cycle inventory (LCA and life-cycle impact assessment (LCIA, are needed to calculate the environmental impacts. Methodology of LCIA applied in this analysis aligns every input and output influence into 16 different categories, divided in two subcategories. The life-cycle assessment reaserch review of the leadfree solders Sn-Cu, SAC (Sn-Ag-Cu, BSA (Bi-Sb-Ag and SABC (Sn-Ag-Bi-Cu respectively, is given in this paper, from the environmental protection aspect starting from production, through application process and finally, reclamation at the end-of-life, i.e. recycling. There are several opportunities for reducing the overall environmental and human health impacts of solder used in electronics manufacturing based on the results of the LCA, such as: using secondary metals reclaimed through post-industrial recycling; power consumption reducing by replacing older, less efficient reflow assembly equipment, or by optimizing the current equipment to perform at the elevated temperatures required for lead-free soldering, etc. The LCA analysis was done comparatively in relation to widely used Sn-Pb solder material. Additionally, the impact factors of material consumption, energy use, water and air reserves, human health and ecotoxicity have been ALSO considered including
PESTEL Model Analysis and Legal Guarantee of Tourism Environmental Protection in China
Zhiyong, Xian
2017-08-01
On the basis of summarizing the general situation of tourism environmental protection in China, this paper analyses the macro factors of tourism environmental protection by using PESTEL model. On this basis, this paper explores the improvement paths of tourism environmental protection based on PESTEL model. Finally, it puts forward the legal guarantee suggestion of tourism environment protection.
Recent developments in environmental protection in India: Pollution control
Energy Technology Data Exchange (ETDEWEB)
Govind, H [NOIDA, Disst, Ghaziabad, Pin (IN)
1989-01-01
In India, pollution and environmental degradation have reached alarming dimensions due to poverty, deforestation, industrial development without adequate environmental safeguards, and sheer greed. Fortunately, public concern, rooted in the country's past, has revived. Major pollutants and critically affected areas have been identified. Pollution control of water, air and land has been established by both official and private organizations and the work on environmental protection is steadily growing. The Ganga purification plan is a representative case study. Poverty alleviation is a long-term process. It is India's major problem and is being tackled with help from private enterprise and by international assistance. Simultaneously environmental protection through pollution control is also receiving administrative and legislative support and fiscal assistance through direct and indirect tax incentives. The country's courts are rendering valuable help to environmentalists by pronouncing far-reaching decisions in public-interest litigation. To boost the existing environment-protection movement, greater emphasis is urgently needed for environmental education, peoples' participation, population control, and cost-effective pollution control measures.
National environmental protection in the Internal Market
International Nuclear Information System (INIS)
Middeke, A.
1994-01-01
In consideration of the awful ecological situation, the further development of environmental protection is the task of the Community institutions and the individual member states. The environmentalists advance this improvement by increasingly setting further protectionist measures within their power, such as those already existing in other member states or those community established. The legally motivated environment protection measures of individual member states could create a non-tariff trade barrier between member states; business and industry situated there must adapted to the environmental conditions of the particular member state, if they wish to launch their product in that state. These safeguard clauses, concerning environmental law are of different nature, are thoroughly analysed and systematized by the author. The thesis gives priority to Article 100A, paragraph 4 and 5, and to Article 130T or 130R, paragraph 2, subparagraph 2, which has recently been introduced by the Treaty of Maastricht for the European Union. These articles are represented concerning their substantive and adjective requirements and are critically reviewed. Problems that have arisen in the course of the review are dealt with dogmatically and are discussed at length. The problems of national discrimination and the consideration of fundamental rights in the Community law are treated as well as the mixture of competences in the environmental law of the Community or the options on legal protection against national environmental acts, which can be made use of by Community institutions and by member states. (orig./HP) [de
Environmental improvement with additional instruments for environmental protection in port areas
MARINSKI, Jordan; FLOQI, Tania; DROUMEVA, Gergana; BRANCA, Tatiana; VATRALOVA, Albena
2012-01-01
Abstract1. The context analysis of environmental situation in Corridor8 ports shows growing sensibility of the management authorities to the environmental issues and objective difficulties for development of appropriate environmental policies due to the following reasons: the complex legislation which has not found yet the balance between the business interests in sea transport and the environment protection and poor enforcement of the regulations. In order to mitigate the negative impact of ...
Radiological Protection and Environmental Monitoring in Bolivia
International Nuclear Information System (INIS)
MartInez Pacheco, J.
1979-01-01
The paper describes the main activities of the Department of Radiological Protection, Nuclear Energy Commission of Bolivia. The following topics are covered: organization, environmental control of air, water, milk and plants, personal dosimetry, instrumentation and calibration, protection in uranium mines. Standard setting and international cooperation aspects are also presented
10 CFR 501.14 - Notice to Environmental Protection Agency.
2010-01-01
... 10 Energy 4 2010-01-01 2010-01-01 false Notice to Environmental Protection Agency. 501.14 Section 501.14 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS ADMINISTRATIVE PROCEDURES AND SANCTIONS General Provisions § 501.14 Notice to Environmental Protection Agency. A copy of any proposed rule or order that imposes a prohibition, order that...
Water power and environmental protection
International Nuclear Information System (INIS)
Anshelm, J.
1992-01-01
This study illuminates the first large environmental debate after World War 2: the struggle against the harnessing of the northern Swedish rivers. The fascinating question is raised of how it was possible for an unparliamentary environmental protection movement to make itself heard, and influence the Swedish energy policy, though their arguments were contrary to the outspoken interests of the industry, the trade unions, and the social democratic government. This was the more fascinating because the values the opinion stressed wore of ethic, esthetic, biological, and conservation economical nature
Energy Technology Data Exchange (ETDEWEB)
Edler, Dietmar [Deutsches Institut fuer Wirtschaftsforschung, Berlin (Germany); Blazejczak, Juergen [Deutsches Institut fuer Wirtschaftsforschung, Berlin (Germany); Fachhochschule Merseburg (Germany); Walz, Rainer [Fraunhofer Institut fuer Innovations- und Systemforschung (FhG ISI), Karlsruhe (DE)] (and others)
2007-06-15
Within the bounds of a research project, the authors of the contribution under consideration report on an extending analysis according to environmental protection and innovation. The stocktaking and evaluation of more important documents prove that despite the differences in the estimation of individual ranges an international consent insists according to central ecological challenges on global level. The consent covers the following target areas: Climate protection, preservation of the biological variety, water supply including waste water disposal and water protection, health protection. It is to be expected that in the next decades its validity will keep these ecological challenges although defusing or new environmental problems may result in single areas. It is to be expected that due to the world-wide economic development some emphasis of important ecological challenges will shift gradually to developing countries, in particular China and India.
Energy Technology Data Exchange (ETDEWEB)
Gellermann, R.G. [Nuclear Control and Consulting GmbH, Braunschweig (Germany); Loebner, W.
2015-07-01
Since several years the protection of the environment has been discussed at various international levels as part of radiation protection. ICRP has published a number of recommendations which relate primarily to the evaluation of radiation exposures to non-human species. Nevertheless, not least because of the declaratory mention of the environment in national legislative documents, the question arises how the environment can be integrated into the radiation protection or whether the radiation protection must be even expanded to new fields. A less discussed aspect here covers material and cultural assets that are classified in environmental law as objects worthy of protection. The paper describes some issues that arise in this context and outlines a framework for the consideration of material assets in radiation protection.
Food and Environmental Protection Newsletter, Vol. 16, No. 2, July 2013
International Nuclear Information System (INIS)
2013-07-01
isotope techniques as an advanced tool to probe and verify the origin and authenticity of foodstuffs. Analytical protocols for stable isotope techniques are being developed and refined with particular emphasis on practical issues, such as the adulteration of honey. Important technical work in support of these stable isotope approaches also includes ensuring that appropriate standard reference materials are available for analytical laboratories worldwide. The laboratory is working with other IAEA laboratories and collaborating institutes to develop certified reference materials for future use in food traceability and authenticity. Research has identified several candidate materials and work is continuing to verify that they meet the necessary stringent criteria. In the area of food contamination, our extra-budgetary funding, obtained under the US Peaceful Uses Initiative (PUI), is helping to facilitate our train-the-trainer activities related to the establishment of food control systems that lead to enhanced food safety and quality. An example is the workshop hosted at the Food and Environmental Protection Laboratory in Seibersdorf, Austria, from 25 February-8 March, which involved analysts from 15 different member states. A comprehensive set of lectures and practical laboratory sessions were used to present and discuss a range of nuclear related technologies for the integrated control of contaminants in food, with special emphasis on pesticides. A full report on this can be found in the Food and Environmental Protection Laboratory section of this newsletter. The Past Events section of the Newsletter also provides further reports on workshops and training initiatives related to capacity building projects. These are funded through the IAEA Technical Co-operation programme and are enabling the Food and Environmental Protection Subprogramme to address requests for support from many different Member States. An example of activities in this area includes a recent workshop in
Environmental Protection Implementation Plan, November 9, 1991--November 9, 1992
International Nuclear Information System (INIS)
Latham, A.R.; Evans, R.B.
1991-11-01
DOE Order 5400.1, ''General Environmental Protection Program,'' established environmental protection program requirements, authorities, and responsibilities to assure that the Department of Energy (DOE) operations are in compliance with applicable federal, state, and local environmental protection laws and regulations, executive orders, and internal department policies. Chapter 3 of DOE Order 5400.1 required that each field organization prepare a plan for implementing the requirements of this order by no later than November 9, 1989, and update the plan annually. Therefore, the Department of Energy/Field Office, Nevada (DOE/NV) has prepared this second annual update of its Environmental Protection Implementation Plan (EPIP). The Order and corresponding guidances also require estimated budgetary resources necessary for implementation of the Order be identified in the Environmental Protection Implementation Plan. To satisfy this requirement, the estimated costs to effectuate necessary changes in existing programs or processes and to institute new programs or processes for compliance with the Order are provided in the following sections of this plan. The DOE/NV Assistant Manager for Operations (AMO), in consultation with other organizations responsible for line management of plan implementation, is responsible for annual plan revisions. 7 figs
Protected areas for environmental sustainability in Nigeria | Imasuen ...
African Journals Online (AJOL)
This paper is focused on protected areas for environmental sustainability in Nigeria. It has examined what protected areas are the meaning, especially as defined by the International Union for the Conservation of Nature (IUCN). A thorough investigation was done to identify the areas that were and are still protected in ...
Zhu, Dongming; Harder, Bryan James
2014-01-01
Advanced hafnia-rare earth oxides, rare earth aluminates and silicates have been developed for thermal environmental barrier systems for aerospace propulsion engine and thermal protection applications. The high temperature stability, low thermal conductivity, excellent oxidation resistance and mechanical properties of these oxide material systems make them attractive and potentially viable for thermal protection systems. This paper will focus on the development of the high performance and high temperature capable ZrO2HfO2-rare earth based alloy and compound oxide materials, processed as protective coating systems using state-or-the-art processing techniques. The emphasis has been in particular placed on assessing their temperature capability, stability and suitability for advanced space vehicle entry thermal protection systems. Fundamental thermophysical and thermomechanical properties of the material systems have been investigated at high temperatures. Laser high-heat-flux testing has also been developed to validate the material systems, and demonstrating durability under space entry high heat flux conditions.
Regulation and decision-making in environmental radiation protection
International Nuclear Information System (INIS)
Larsson, C.M.
2004-01-01
The EC-funded project FASSET (Framework for Assessment of Environmental impact), which completed in 2003, has developed an assessment framework for evaluating the environmental impact of ionising radiation on biota in natural ecosystems. The FASSET framework comprises: source characterisation and initial hazard analysis; ecosystem description and selection of reference organisms (ca 30, with defined geometry and life history); exposure analysis, including conversion of input data to external and internal radionuclide concentrations, and subsequent conversion to dose rates; effects analysis, supported by an effects database; and, guidance for interpretation. The framework provides practical and scientific support to the international development of recommendations for radiological protection of the environment through the International Commission on Radiological Protection (cf. ICRP Publication 91). However, on the basis of experiences from FASSET and other recent developments, it can be concluded that there are challenges remaining before environmental radiological protection can be seen as a natural component of general environmental protection. The major future challenge is the development of an integrated approach where decision-making can be guided by sound scientific judgements. This requires, inter alia, filling in gaps in basic knowledge of relevance to assessment and protection, through targeted experimental, theoretical (including expert judgements) and real case studies; development of risk characterisation methodologies, based on both theoretical and experimental studies; development of screening standards, where appropriate; development of user-friendly assessment tools; and stakeholder involvement, including development of supporting communication strategies. A new EC-funded project, ERICA (Environmental Risk from Ionising Contaminants: Assessment and management), has recently started. The project has four operational work packages, being devoted to
Uranium Mill Tailings Remedial Action Project Environmental Protection Implementation Plan
International Nuclear Information System (INIS)
Vollmer, A.T.
1993-10-01
The Uranium Mill Tailings Remedial Action (UMTRA) Project Environmental Protection Implementation Plan (EPIP) has been prepared in accordance with the requirements of the US Department of Energy (DOE) Order 5400.1. The UMTRA EPIP covers the time period of November 9, 1993, through November 8, 1994. It will be updated annually. Its purpose is to provide management direction to ensure that the UMTRA Project is operated and managed in a manner that will protect, maintain, and where necessary, restore environmental quality, minimize potential threats to public health and the environment, and comply with environmental regulations and DOE policies. Contents of this report are: (1) general description of the UMTRA project environmental protection program; (2) notifications; (3) planning and reporting; (4) special programs; (5) environmental monitoring programs; (6) quality assurance and data verification; and (7) references
Uranium Mill Tailings Remedial Action Project Environmental Protection Implementation Plan
Energy Technology Data Exchange (ETDEWEB)
Vollmer, A.T.
1993-10-01
The Uranium Mill Tailings Remedial Action (UMTRA) Project Environmental Protection Implementation Plan (EPIP) has been prepared in accordance with the requirements of the US Department of Energy (DOE) Order 5400.1. The UMTRA EPIP covers the time period of November 9, 1993, through November 8, 1994. It will be updated annually. Its purpose is to provide management direction to ensure that the UMTRA Project is operated and managed in a manner that will protect, maintain, and where necessary, restore environmental quality, minimize potential threats to public health and the environment, and comply with environmental regulations and DOE policies. Contents of this report are: (1) general description of the UMTRA project environmental protection program; (2) notifications; (3) planning and reporting; (4) special programs; (5) environmental monitoring programs; (6) quality assurance and data verification; and (7) references.
Ethical foundations of environmental radiological protection.
Oughton, D H
2016-06-01
Assessing the potential ecological impact of ionising radiation raises a number of ethical questions. These include fundamental questions such as what exactly constitutes harming the environment, and how the environment should be valued, as well as links to political protection principles such as sustainability and biodiversity. Starting from developments within ecological risk assessment, this paper summarises some of the ethical issues concerning the protection of the environment from radiation. Chapter 2 gives a brief overview of different philosophical and cultural world views on valuing the environment in a context of radiation risk. Chapter 3 addresses some recent challenges to proposed environmental protection frameworks, including practical applications following the Chernobyl and Fukushima accidents, and some scientific developments such as the ecosystem approach. Finally, Chapter 4 offers some recommendations on how ethical evaluation can help produce a more robust and transparent approach to the protection of the environment. In conclusion, there is a need for a holistic evaluation of the environmental impacts of ionising radiation that not only considers the direct consequences on the health of humans and non-human species, but also the more complex social, ethical, and economic consequences of both human and non-human exposures. © The International Society for Prosthetics and Orthotics.
Environmental Protection Agency - EPA Pub Central
U.S. Environmental Protection Agency — PubMed Central (PMC) is a full-text, online archive of journal literature operated by the National Library of Medicine. The EPA is using PMC to permanently preserve...
Energy Technology Data Exchange (ETDEWEB)
Legler, Harald; Krawczyk, Olaf [Niedersaechsisches Institut fuer Wirtschaftsforschung (NIW), Hannover (Germany); Walz, Rainer; Eichhammer, Wolfgang; Frietsch, Rainer [Fraunhofer Institut fuer System- und Innovationsforschung (ISI), Karlsruhe (Germany)
2006-05-15
The analysis on the economic factor environment and the German environmental industry on international competition is faced to methodological limits, since the environmental industry does not present itself as an homogeneous sector. The study is organized in the following chapters: introduction - the importance of environmental industry; classification of environmental and climate protection industry; productivity volume and production structure; international competition for potential environmental protection products; environmental protection industry and innovative performance. Integrated environmental solutions are of increasing significance, avoiding emissions and products and production process from beginning on. All known forecast indicate an expansive market development. In addition the rising prices for crude oil may push the search for innovative solutions to substitute fossil energy sources. The environmental industry should look for globally transferable solutions in order to promote global sustainable growth.
Environmental testing techniques for electronics and materials
Dummer, Geoffrey W A; Fry, D W; Higinbotham, W
2013-01-01
Environmental Testing Techniques for Electronics and Materials reviews environmental testing techniques for evaluating the performance of electronic equipment, components, and materials. Environmental test planning, test methods, and instrumentation are described, along with the general environmental conditions under which equipment must operate. This book is comprised of 15 chapters and begins by explaining why environmental testing is necessary and describing the environment in which electronics must operate. The next chapter considers how an environmental test plan is designed; the methods
Thermal power stations and environmental protection
International Nuclear Information System (INIS)
Gerking, E.
1975-01-01
In this book, the advantages of an optimum cooling concept for waters are compared with the disadvantages of an uncontrolled thermal pollution of waters by waste waters from thermal power plants. The book focuses on the problem of the cost of measures for environmental protection which has not yet received a detailed and complete treatment. The author suggests that perfectionist solutions and superfluos measures be abandoned in favour of a far-reaching, efficient environmental protection concept with a low expenditure of fuel and capital. A detailed treatment is given to false conclusions in the present estimations of the effects of thermal pollution of the waters and to the advantages of freshwater cooling and cooling in general. Also discussed are immission problems and attempts at their solution. (ORU/AK) [de
International viewpoints on environmental protection: goals and methods
International Nuclear Information System (INIS)
Johnston, P.A.; Carroll, S.; Stephenson, A.D.; Stringer, R.L.; Santillo, D.
1996-01-01
Environmental protection of natural ecosystems against the effects of radiation has been largely predicated upon human radiological protection regimes. It has been explicitly assumed that if human populations are adequately protected then this will also confer protection to other species at the population level and hence to the 'environment'. Accordingly, non-human organisms have principally been incorporated into regulatory and assessment frameworks in recognition of their role as part of diverse critical pathways of radionuclide transfer to human populations. Hence, the utility of these non-human organisms in assessing hazards to ecosystems is strictly limited since their selection for monitoring purposes relates more to human perspectives than to their role and importance in natural ecosystems. By contrast, a multispecies ecosystem level approach should work on the basis of selecting 'keystone' species and evaluating the effects of radiation upon natural ecosystem dynamics. This would accommodate the full range of sub-lethal effects, differential life-stage sensitivity, reproductive sensitivity and interspecific interactions. While such an approach would undoubtedly improve the current situation, experience from chemical ecotoxicology suggests that the selection and verification of suitable endpoints will prove difficult beyond an organismal level. Thus, a regulatory regime based upon this approach is almost certain to be less than effective at protecting the environment. The precautionary approach to environmental protection has largely grown from an awareness of the limitations of ecotoxicological studies and protocols. This paper, therefore, considers the need for application of such an approach in relation to environmental protection requirements of the nuclear industry
Separation from the budget of the Republic of Serbia environmental protection
Directory of Open Access Journals (Sweden)
Dašić Boban
2017-01-01
Full Text Available The term 'budget' has international significance for national income and expenditure plan and used by most countries in the world. Symbolizes the bag Minister of Finance by the same 'opening' during the presentation to parliament plan of government revenues and expenditures. The main sources of environmental financing in the Republic of Serbia, the State Budget and fee income. Elements of the system of financing environmental regulations are defined in different areas. To collect data on the financing of environmental protection at the national level the fundamental importance of the Agency for Environmental Protection. The environment must have a much higher priority than it currently has in Serbia. Environmental protection is one of the most important activities of the company, it impinges on all aspects of people's daily lives. The analysis of economic instruments in environmental protection is very important, because it shows how much this activity is effectively implemented at the state and local level.
Environmental protection in actual circumstances of EPS recovery
International Nuclear Information System (INIS)
Gavrilovic, M.
2002-01-01
The paper presents a brief summary of the state of environmental protection in the vicinity of Electric Power Industry of Serbia (EPS) power facilities, both when economy of FR Yugoslavia (FRY) was at an acceptable level and the current situation resulting from a drastic decline of economic power of country and EPS itself, from unfavourable political development from the past period, from the sanctions imposed by UN Security Council, from a prolonged isolation from modern courses worldwide as well as from bombing of facilities during NATO aggression against Yugoslavia. The paper is focused on the analysis of the possibilities of taking certain activities aimed at environmental protection under expected realistic circumstances of EPS recovery and its further development, in accordance with the overall economic recovery and development of the country, and to estimate the price of all environmental protection measures which, would otherwise have been realised in the course of the past period if sanctions of UN Security Council have not been imposed on FR Yugoslavia. (author)
Environmental protection - Penal Law. Umweltschutz-Strafrecht
Energy Technology Data Exchange (ETDEWEB)
Sack, H J
1980-01-01
The 18th Amendment of the Penal Law - Law on the Abatement of Environmental Delinquency - (18. StrAendG) has now been passed. It has been promulgated on March 28, 1980 and has come into force on July 1, 1980. Through this amendment, a large number of the provisions of the environmental law regarding sanctions has been incorporated into the Penal Code. Persons concerned with environmental protection and pollution control will also in future need such a textbook with comments as a guide to the most important provisions on sanctions and fixed penalties. The 18th Amendment of the Penal Code does not cover all the provisions on sanctions to be applied in the field of environmental protection, a number of regulations still remains part of other, special laws. The same applies to the provisions on penalties which are laid down in a variety of individual laws and regulations, as a comprehensive code of environmental laws still remains to be established. This first part of the textbook in loose-leaf form deals mainly with the new provisions of sections 311d, 311e, 324, and 325. The other facts of the 18th Amendment will be discussed in the second part. As the regulations have, for the most part, not been completly revised or newly inserted, parts 1/3 of the first edition of this textbook can still be used as a help in analysing the existing provisions.
Manual of respiratory protection against airborne radioactive materials
International Nuclear Information System (INIS)
Caplin, J.L.; Held, B.J.; Catlin, R.J.
1976-10-01
The manual supplements Regulatory Guide 8.15, ''Acceptable Programs for Respiratory Protection''. It provides broad guidance for the planned use of respirators to protect individuals from airborne radioactive materials that might be encountered during certain operations. The guidance is intended for use by management in establishing and supervising programs and by operating personnel in implementing programs. Guidance is primarily directed to the use of respirators to prevent the inhalation of airborne radioactive materials. Protection against other modes of intake (e.g., absorption, swallowing, wound injection) is, in general, not covered nor is the use of protective equipment for head, eye, or skin protection
Directory of Open Access Journals (Sweden)
Shengnan Li
2018-05-01
Full Text Available In the study of environmental protection issues for more than forty years, research on the impact of financial performance on environmental protection has been one of the important branches. In the framework of principal-agent theory, this paper explores the opportunism motives in a company’s environmental protection activism and the moderating role of corporate governance using the data of Chinese listed companies from 2005 to 2016. The study finds that: (1 the company’s environmental protection activism is driven by the opportunist motives of policymakers who want to mask their inability; and (2 environmental protection activism does not enhance the company’s future performance and value creation capability. Further studies find that corporate governance mechanisms play different moderating roles. Fund Shareholders play a positive governance role and reduce the correlation between financial performance and environmental protection activism. However, independence of the board of directors intensifies the opportunist motives. This paper provides new theoretical explanations for environmental protection decision-making, provides novel enlightenment for the protection of environmental protection policies in developing countries and regions.
Forbidden immisions and environmental protection
Directory of Open Access Journals (Sweden)
Popov Danica
2012-01-01
Full Text Available In the Serbian Law and in the most of jurisdictions, there are limits on exercising the right of property. A real estate owner must refrain from activities by which the use of other real estate is being imploded through the emission of excessive gasses, vapors, smoke, heat, noise, the draining of waste water, etc. Neighboring real estate owners must endure such harmful effects if they do not exceed the limit of usual endurance, taking into account the nature and purpose of such real estate, as well as local conditions. The property owner who is affected by emissions exceeding the set limit, has the right to request a stop of emissions which exceeded the allowed volume of emissions. If the imissions originate from some industrial plants, within the activity allowed by a state authority, one cannot request a cessation of such activities, but can simply seek damages. The issue of the environmental protection in the Republic of Serbia is regulated by a number of particular substantive laws, with a Law of environmental protection of 2009. as fundamental Law.
This protocol was developed under the Environmental Protection Agency's Environmental Technology Verification (ETV) Program, and is intended to be used as a guide in preparing laboratory test plans for the purpose of verifying the performance of grouting materials used for infra...
Role of physical protection and safeguards technology used to Nuclear Material Security
International Nuclear Information System (INIS)
Djoko-Irianto, Ign.
2005-01-01
The presence of nuclear materials at any nuclear facility must be in secure and must be known as safeguards purpose such as its position, from or type and amount. The clarification of the amount be reported to the national regulatory body and International Atomic Energy Agency (IAEA) as the International regulatory body. The national regulatory body and IAEA will then verify that report. The verification must be done to know there is no difference of the amount, and to give the assurance to the International community that any diversion of safeguarded nuclear material from civil use to a prescribed military purpose would be detected. To carry out verification, several verification techniques such as non-destructive analysis, surveillance, unattended and remote monitoring and environmental sampling are explained to convey the impression how those techniques are implemented. According to the security requirement, the physical protection system including all components of physical protection system have to be effectively designed
The Application of Auxetic Material for Protective Sports Apparel
Directory of Open Access Journals (Sweden)
Charlotte Moroney
2018-02-01
Full Text Available Current research of auxetic materials highlights its potential as personal protective equipment for sports apparel with enhanced properties such as conformability, superior energy absorption and reduced thickness. In contrast, commercially available protective materials have proven to be problematic in that they inhibit movement, breathability, wicking and that molded pads are prone to saddling. Foam components are embedded within personal protective equipment for sports apparel, where protective material is positioned at regions of the body frequently exposed to injury of the soft tissue through collision, falls or hard impact. At present, the impact resistance of auxetic open cell polyurethane foam and some additively manufactured auxetic structures have been established, and processes for manufacturing curved auxetic materials as well as molding methods have been developed. Despite this, auxetic materials have not yet been applied as personal protective equipment for sports apparel in current research. This paper argues that there is scope to investigate auxetic materials potential for enhanced wearer functionality through properties of synclastic curvature and biaxial expansion.
Environmental radiation protection standards
International Nuclear Information System (INIS)
Richings, L.D.G.; Morley, F.; Kelley, G.N.
1978-04-01
The principles involved in the setting of radiological protection standards are reviewed, and the differences in procedures used by various countries in implementing them are outlined. Standards are taken here to mean the specific numerical limits relating to radiation doses to people or to amounts of radioactive material released into the environment. (author)
MDOT Materials Laboratories : Environmental Management Plan
2012-06-01
The goal of this EMP was to develop and implement a comprehensive Environmental : Management Plan for MDOT Materials Laboratories. This goal was achieved through : perfonnance of environmental audits to identify potential environmental impacts, and b...
Manual of respiratory protection against airborne radioactive materials
Energy Technology Data Exchange (ETDEWEB)
Caplin, J.L.; Held, B.J.; Catlin, R.J.
1976-10-01
The manual supplements Regulatory Guide 8.15, ''Acceptable Programs for Respiratory Protection''. It provides broad guidance for the planned use of respirators to protect individuals from airborne radioactive materials that might be encountered during certain operations. The guidance is intended for use by management in establishing and supervising programs and by operating personnel in implementing programs. Guidance is primarily directed to the use of respirators to prevent the inhalation of airborne radioactive materials. Protection against other modes of intake (e.g., absorption, swallowing, wound injection) is, in general, not covered nor is the use of protective equipment for head, eye, or skin protection.
Environmental protection technologies and prospect for uranium mining and metallurgy in China
International Nuclear Information System (INIS)
Pan Yingjie
2002-01-01
Based on practices of production and environmental protection of China's uranium mining and metallurgy, control and protection of the three wastes in uranium mining and metallurgy are discussed. Prospects for environmental protection technologies of uranium mining and metallurgy is made
Environmental and Radiological Protection Department - DEPRA
International Nuclear Information System (INIS)
1989-01-01
The activities and purposes of the Environmental and Radiological Protection Dept. of the Institute of Radioprotection and Dosimetry form Brazilian CNEN are presented. It is also presented an historical review of its activities, its personnel and its sections. (J.A.M.M.)
Protection and environmental supervision activities at ROMAG PROD Plant
International Nuclear Information System (INIS)
Chilom, Rodica
2002-01-01
The protection and environmental supervision activity at ROMAG PROD heavy water plant is embodied in the very production process. The environmental supervision is done by: 1. the sensing system for H 2 S which monitors H 2 S and other gases 24 h/day on three zones of production storage and transport of H 2 S; 2. daily tightness checking of the installations working with H 2 S; 3. daily analytical checking of the air and water pollutants at seven air sampling checking points in dwelled zones, at the industrial area boundary and at purification stations and water waste discharge points. The water and air environmental components are protected through safe operation of the heavy water installations and of the flue gas installation. The water protection is ensured through optimal operation of the purification facilities, namely: the purification of the water resulting from the isotopic exchange; acid water neutralization station which process the waste water collected from the whole plant; neutralization reservoir for water resulting from ionic exchange; purification station of the sulfate waters resulting from the H 2 S fabrications installation; mud pool. The ROMAG PROD Plant operates according to the ISO 9001 and ISO 14001 standards and reports regularly its activity to the Environmental Protection and Water System Management Authority
Post-material values and environmental policy change
Energy Technology Data Exchange (ETDEWEB)
Watts, N. (International Inst. for Environmental and Society, Berlin, Germany); Wandesforde-Smith, G.
Environmental policy may be particularly suited as a vehicle to articulate post-material values in advanced industrial societies, and recognition of this is likely to prove enormously helpful in future comparative and cross-national research into the origins of environmentalism and the causes of environmental policy change. The paper notes the salient characteristics of post-materialism and the overlap of these with the leading indicators of environmentalism. Possible structural causes for this overlap are noted and opposed to the prevailing socialization explanation for the adoption of post-material and environmental values. To help understand the impact of environmentalism on policy, an idealized development of the movement is sketched. This leads to the description of a set of general factors likely to be related to the way environmentalism finds political expressions in various countries. In the final section, the focus is on what we might want to know about the policy process in order to be able to gauge environmentalist influence on policy outputs. 20 references.
Alkali metal protective garment and composite material
Ballif, III, John L.; Yuan, Wei W.
1980-01-01
A protective garment and composite material providing satisfactory heat resistance and physical protection for articles and personnel exposed to hot molten alkali metals, such as sodium. Physical protection is provided by a continuous layer of nickel foil. Heat resistance is provided by an underlying backing layer of thermal insulation. Overlying outer layers of fireproof woven ceramic fibers are used to protect the foil during storage and handling.
Environmental protection using social costing
International Nuclear Information System (INIS)
Lee, R.
1993-01-01
Emissions and other residual wastes come from industrial production, commercial and household activities, and transportation. These wastes damage the environment, including human health. As economies grow, so does concern about balancing that growth with the desire for environmental protection. At issue is how much environmental protection we should have. We address this issue using the concept of social costing. The issue is discussed in the context of electric power generation. There is particular concern about the use of fossil fuels such as petroleum, the major fuel used in the Republic of China, and coal which is the most common fuel used in the U. S. Electric power generation is a major source of airborne pollutants such as SO 2 , NO x particulate matter, volatile organic compounds, CO, and CO 2 . It also results in liquid and solid wastes, and other effects such as changes in land use. To generate electric power, fuel (such as petroleum, coal or enriched uranium) or some other resource (e.g., wind or geothermal) is needed. A fuel cycle consists of a sequence of activities and processes involved in generating electric power. These activities include fuel extraction, treatment and processing; fuel conversion into electricity; transmission; waste disposal; and transportation of fuel and wastes between the different stages of the fuel cycle. Each stage results in emissions or other residuals. Several recent-studies have been about the environmental costs of electricity
Physical protection of nuclear materials and facilities in CEA
International Nuclear Information System (INIS)
Garnier-Gratia, M.-H.; Jorda, A.
2001-01-01
Full text: CEA (Commissariat a l'Energie Atomique), as nuclear operator, is responsible for the control and protection of their nuclear materials. Inside CEA, DCS (Central Security Division) is in charge of the security matters, DCS defines the CEA strategy in this field, especially in physical protection. The paper will present the physical protection strategy of CEA. DCS defines the rules and methods; the operators have to apply in order to fulfill the security objectives of CEA. CEA has to provide the regulatory authority with documents proving that it is in accordance with the requirements of the 25th July 1980 law and 12th May 1981 decree. It has to implement all the necessary means in order to achieve the results requested by the regulatory authority. All these arrangements are described in the 'license and control file'. This file should specify the facility safeguards and physical protection system. Accounting measures are also described. In this file, the petitioner has to justify its capacity for holding nuclear materials and for exercising authorized activities on them. So the organization and the installed means have to be described in this authorization file. For physical protection, containment, surveillance and physical protection measures are presented: Containment measures must prevent the unauthorized or unjustified movements of nuclear material in the framework of the authorized activities; Surveillance measures must guarantee the integrity of the containment, check that no material is exiting by an abnormal channel; Physical protection measures for the materials, the premises and the facilities are intended to protect them against malevolent actions by means of security systems. The Central Security Division has established guidelines to provide guidance to the nuclear materials holders in writing such files. Each holding unit has to establish a 'license and control file' and each CEA site establishes a 'site license and control file
Environmental TEM for Materials Research
DEFF Research Database (Denmark)
Hansen, Thomas Willum
Over the last decades, electron microscopy has played a large role in materials research. The increasing use of particularly environmental transmission electron microscopy (ETEM) in materials science provides new possibilities for investigating nanoscale components at work. Careful experimentation...
Environmental TEM in Materials Research
DEFF Research Database (Denmark)
Hansen, Thomas Willum; Wagner, Jakob Birkedal
Over the last decades, electron microscopy has played a large role in materials research. The increasing use of particularly environmental transmission electron microscopy (ETEM) in materials science provides new possibilities for investigating nanoscale components at work. Careful experimentation...
Review of orders and regulations requiring environmental protection
International Nuclear Information System (INIS)
Kelly, E.; Cunningham, R.; Michael, D.
1996-01-01
With the increased awareness of and interest in potential ecological risks associated with past, current, and future Department of Energy (DOE) activities, DOE's Defense Programs (DP) Office of Technical and Environmental Support sponsored a study to (1) evaluate the effectiveness of the current compliance-driven environmental protection and assessment efforts relative to ecological concerns; (2) explore the need for a more focused, integrated approach to address ecological impacts; and (3) identify the requirements for an integrated approach. The study explored four questions. (a) Which federal regulations and DOE orders either explicitly require ecological assessments or implicitly require them through environmental protection language? (b) What currently is being done at selected DOE facilities to implement these regulations and orders? (c) What are private sector industries doing in terms of ecological risk assessments and how do industry approaches and issues compare with those of DOE? (d) What, if anything, in addition to current efforts is needed to ensure the protection of ecological resources associated with DOE facilities, to support defensible decision making, and to improve efficiency? The results of this study are presented in a report titled open-quotes Integrated, Comprehensive Ecological Impact Assessments In Support of Department of Energy Decision Makingclose quotes. This report is a companion document to that report. This report provides a more detailed discussion of the document reviews of the relevant environmental protection regulations and current and pending DOE orders. The main goal of the document reviews was to understand existing requirements for ecological data collection and impact assessments
Rodriguez, Lulu; Farnall, Olan; Geske, Joel; Peterson, Jane W.
1998-01-01
A study of 483 Iowa citizens and state legislators found that self-interest had the strongest effect on formation of opinions toward environmental protection; sociotropic and symbolic politics models were also effective. Results indicate that campaign messages must stress the benefits of environmental protection to the individual. (JOW)
Electron accelerators for environmental protection
International Nuclear Information System (INIS)
Zimek, Z.
1998-01-01
The primary objective of this publication is to provide information suitable for electron accelerators implementation in facilities applying radiation technology for environmental protection. It should be noticed that radiation processing has been successfully used in the fields of crosslinking polymer curing and medical products sterilization for more than 40 years. Practical application of radiation technology today extends on SO 2 and NO x removal from the flue gas (one of major power intensive radiation processing), destruction and removal of organic chemicals from water, decreasing bacteria content in the irradiated sludge and waste water. On the other hand the increased awareness of environmental pollution hazards and more stringent waste regulations in many countries may open stronger support for environmentally oriented technologies. This publication provides an evaluation of electron accelerators capabilities in respect of environmental applications where technological and economical criteria are now well defined. In order to determine the potential of electron accelerators, the literature data were examined as well visits and meetings with various accelerator manufacturers were performed by the author. Experience of the author in accelerator facilities construction and exploitation including those which were used for environmental protection are significant part of this publication. The principle of accelerator action was described in Chapter 1. Early development, accelerator classification and fields of accelerators application were included to this chapter as well. Details of accelerator construction was described in Chapter 2 to illustrate physical capability of accelerators to perform the function of ionizing radiation source. Electron beam extraction devices, under beam equipment, electron beam parameters and measuring methods were characterized in this chapter as well. Present studies of accelerator technology was described in Chapter 3, where
The U.S. Environmental Protection Agency Environmental Technology Verification (ETV) program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This technology ...
International Nuclear Information System (INIS)
Page, B.; Hilty, L.M.
1994-01-01
Environmental computer science is a new partial discipline of applied computer science, which makes use of methods and techniques of information processing in environmental protection. Thanks to the inter-disciplinary nature of environmental problems, computer science acts as a mediator between numerous disciplines and institutions in this sector. The handbook reflects the broad spectrum of state-of-the art environmental computer science. The following important subjects are dealt with: Environmental databases and information systems, environmental monitoring, modelling and simulation, visualization of environmental data and knowledge-based systems in the environmental sector. (orig.) [de
Environmental Protection Agency Semiannual Regulatory Agenda
2010-12-20
... of the economy, productivity, competition, jobs, the environment, public health or safety, or State... Steve Fruh, Environmental Protection Agency, Air and Radiation, 1200 Pennsylvania Ave, NW, Washington, DC 20460 Phone: 919 541-2837 Fax: 919 541-4991 Email: fruh.steve@epamail.epa.gov RIN: 2060-AP69...
Environmental protection: private vegetable gardens on water protected areas in Ljubljana
Directory of Open Access Journals (Sweden)
Sara Strajnar
2008-12-01
Full Text Available The areas of allotment gardens and private vegetable gardens are two types of ‘small-scale agriculture’ on water protected areas in Ljubljana and surroundings. From the environmental protection point of view, these gardens are important for the intensity of production and large number of gardeners. In author’s graduation thesis the gardening habits have been investigated in detail. We combined data from fi eld work with numerous measurements of phytopharmaceutical products and nutrients in soil and vegetables.
The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This techn...
The convention on the physical protection of nuclear material
International Nuclear Information System (INIS)
1980-05-01
This document contains the full text of a convention to facilitate the safe transfer of nuclear material, and to insure the physical protection of nuclear material in domestic use, storage, and transport. Two annexes are included, which establish categories of nuclear materials and levels of physical protection to be applied in international transport
Environmental Compliance and Protection Program Description Oak Ridge, Tennessee
Energy Technology Data Exchange (ETDEWEB)
Bechtel Jacobs
2009-02-26
The objective of the Environmental Compliance and Protection (EC and P) Program Description (PD) is to establish minimum environmental compliance requirements and natural resources protection goals for the Bechtel Jacobs Company LLC (BJC) Oak Ridge Environmental Management Cleanup Contract (EMCC) Contract Number DE-AC05-98OR22700-M198. This PD establishes the work practices necessary to ensure protection of the environment during the performance of EMCC work activities on the US Department of Energy's (DOE's) Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee, by BJC employees and subcontractor personnel. Both BJC and subcontractor personnel are required to implement this PD. A majority of the decontamination and demolition (D and D) activities and media (e.g., soil and groundwater) remediation response actions at DOE sites on the ORR are conducted under the authority of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). CERCLA activities are governed by individual CERCLA decision documents (e.g., Record of Decision [ROD] or Action Memorandum) and according to requirements stated in the Federal Facility Agreement for the Oak Ridge Reservation (DOE 1992). Applicable or relevant and appropriate requirements (ARARs) for the selected remedy are the requirements for environmental remediation responses (e.g., removal actions and remedial actions) conducted under CERCLA.
Large-scale projects between regional planning and environmental protection
International Nuclear Information System (INIS)
Schmidt, G.
1984-01-01
The first part of the work discusses the current law of land-use planning, municipal and technical construction planning, and licensing under the atomic energy law and the federal law on immission protection. In the second part some theses suggesting modifications are submitted. In the sector of land-use planning substantial contributions to the protection of the environment can only be expected from programs and plans (aims). For the environmental conflicts likely to arise from large-scale projects (nuclear power plant, fossil-fuel power plant) this holds good for the most part of site selection plans. They have bearings on environmental protection in that they presuppose thorough examination of facts, help to recognize possible conflicts at an early date and provide a frame for solving those problems. Municipal construction planning is guided by the following principles: Environmental protection is an equivalent planning target. Environmental data and facts and their methodical processing play a fundamental part as they constitute the basis of evaluation. Under the rules and regulations of the federal law on immission protection, section 5, number 2 - prevention of nuisances - operators are obliged to take preventive care of risks. That section is not concerned with planning or distribution. Neither does the licensing of nuclear plants have planning character. So far as the legal preconditions of licensing are fulfilled, the scope for rejection of an application under section 7, subsection 2 of the atomic energy law in view of site selection and requirement of a plant hardly carries any practical weight. (orig./HP) [de
Guidelines for the environmental protection in peat mining; Turvetuotannon ympaeristoensuojeluohje
Energy Technology Data Exchange (ETDEWEB)
NONE
2013-06-15
The objective of these guidelines is to accelerate environmental protection in peat mining and to reduce the harmful effects caused by its related activities. The guidelines promote achievement of environmental objectives set both in legislation and government programmes through uniform practices and interpretations. The guidelines are based on current valid legislation. The guidelines provide up-to-date information on best practices in peat mining, especially in water protection but also in reducing noise and dust. They are intended to ease the work of both peat producers and the licensing and controlling authorities. The guidelines are not legally binding and must be applied on case-by-case basis. The current guidelines replace the 'Guidelines for environmental protection in peat mining' given in 2008. (orig.)
Convention on the Physical Protection of Nuclear Material
International Nuclear Information System (INIS)
1980-01-01
The convention on the Physical Protection of Nuclear Material is composed of the text of 23 articles, annex 1 showing the levels of physical protection and annex 2 which is the categorization list of nuclear material. The text consists of definitions (article 1), the scope of applications (2), liability of protecting nuclear material during international transport (3 and 4), duty of mutual cooperation (5 and 6), responsibility for criminal punishment (7 to 13), and final provisions (14 to 23). It is to be noted that the nuclear material for military purposes and domestic nuclear facilities are excluded in the connection. After the brief description of the course leading to the establishment of the convention, individual articles and annexes and the respective Japanese version, and the explanation based on the intergovernmental meeting discussion on the draft convention are described. (J.P.N.)
Joint stock company memorandum of association and environmental protection
Directory of Open Access Journals (Sweden)
Arsić Zoran
2012-01-01
Full Text Available Joint stock company memorandum of association and environmental protection 2011 Company Act stipulates that prevailing purpose of enterprise is mandatory element of memorandum of association. Connection between memorandum of association and environmental protection is based on provision that registration or doing certain business may be subject to license granted by relevant body. This is the case with 2009 Waste Management Act which provides for license granted by state authorities for doing one or more activities in waste management.
Environmental protection at home
International Nuclear Information System (INIS)
Bramigk, D.; Bramigk, G.
1989-12-01
The primer for households clarifies in a popular scientific form, how environmental protection can be practised in the domestic family circle. It is pointed out to the fact in how for a first step to the reduction of water and energy consumption can be made through a critical self control. Important hinds are given for waste avoidance and waste reutilization. It can be achieved through information and deliberation that the environment conscious household keeps away from products and arises endangering the health and impacting the environment. (orig./BBR) [de
The Physical Protection of Nuclear Material and Nuclear Facilities
International Nuclear Information System (INIS)
1999-08-01
Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international co-operation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and nuclear materials, particularly when such materials are transported across national frontiers
The Physical Protection of Nuclear Material and Nuclear Facilities
International Nuclear Information System (INIS)
1999-06-01
Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international co-operation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and nuclear materials, particularly when such materials are transported across national frontiers [es
The Physical Protection of Nuclear Material and Nuclear Facilities
International Nuclear Information System (INIS)
1999-06-01
Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international co-operation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and nuclear materials, particularly when such materials are transported across national frontiers
Food and environmental protection newsletter. V. 1, no. 1
International Nuclear Information System (INIS)
1998-03-01
The news letter reports workshops and training events in the areas of food irradiation, environmental impacts of pesticides; radionuclide migration and related topics. It also describes existing and future coordinated research programs in food and environmental protection
Food and environmental protection newsletter. V. 1, no. 1
Energy Technology Data Exchange (ETDEWEB)
NONE
1998-03-01
The news letter reports workshops and training events in the areas of food irradiation, environmental impacts of pesticides; radionuclide migration and related topics. It also describes existing and future coordinated research programs in food and environmental protection.
Environmental radiation protection. The new ICRP concept
International Nuclear Information System (INIS)
Kaps, C.; Lorenz, B.
2013-01-01
Protection of the environment regarding radiation protection was so far reduced to the concept: if man is protected the environment is protected well enough. This was derived from the radiosensitivity curve, according to which highly developed organisms are more sensible to radiation than less highly developed. ICRP publication 103 put this simple concept in question. Even before, ICRP set up a committee to discuss this theme. End of 2012 ICRP released a new concept of environmental protection regarding different exposure situations and brought it up for discussion in the internet. This concept is based on Reference Animals and Plants (RAPs) and analogous to the concept of the protection for man. The exposure for representative organisms regarding ionizing radiation shall be estimated and compared with Derived Consideration Reference Levels (DCRLs). If the DCRLs are reached or exceeded there is a need to react. This concept raises several questions. (orig.)
International Nuclear Information System (INIS)
Rama Rao, V.V.S.; Gupta, R.V.; Pandey, B.L.
1997-01-01
The Heavy Water Plant at Manuguru is designed to produce 185 MTY of nuclear grade heavy water based on bithermal H 2 S-H 2 O exchange process and handles large inventory of H 2 S gas (about 400 MT). As H 2 S gas is very toxic, corrosive and hazardous in nature, extreme care has been taken in the design of plant, selection of equipment and materials adhering to stringent fabrication procedures and codes to ensure the production of heavy water in a safe manner. This paper highlights the improvements done at Heavy Water Plant (Manuguru) to increase the standards of environmental protection. The safety assessment of a hazardous plant is a continuous process. Apart from the extreme care taken in the design, construction, commissioning and operation of the plant, review of each and every safety related unusual occurrence by various levels of review committees as stipulated and speedy implementation of the recommendations goes in a long way in increasing the standards of environmental protection
Feng, Jun-shu; Jin, Yan-ming; Hao, Wei-hua
2017-01-01
Based on modelling the environmental influence index of power transmission and transformation project and energy-saving and emission-reducing index of source-grid-load of power system, this paper establishes an objective decision model of power grid environmental protection, with constraints of power grid environmental protection objectives being legal and economical, and considering both positive and negative influences of grid on the environmental in all-life grid cycle. This model can be used to guide the programming work of power grid environmental protection. A numerical simulation of Jiangsu province’s power grid environmental protection objective decision model has been operated, and the results shows that the maximum goal of energy-saving and emission-reducing benefits would be reached firstly as investment increasing, and then the minimum goal of environmental influence.
International Nuclear Information System (INIS)
Barisas, S.; Polich, J.; Surles, T.; Habegger, L.; Anderson, D.; Opelka, J.; Frangos, T.
1985-03-01
This manual has been prepared to assist DOE field organizations in conducting environmental protection appraisals of activities at DOE operating-level facilities. Its primary use will be by DOE operations offices in their appraisal of facilities operating under the authority of the Atomic Energy Act. However, the manual can also be used by other DOE field organizations. This manual is organized in modules that parallel those in the internal environmental audit checklist. It is assumed that the contractor is using the guide previously described (Internal Environmental Protection Audits) and that operations office staff members will have the opportunity to review or be cognizant of the contractor's completed internal audit, and other material generated within the facility, in preparation for the appraisal. This manual was developed to facilitate the appraisal process by providing operations office staff with a choice of modules that can be used independently or as a unit. The manual gives guidelines for reviewing information submitted to the operations office before the site visit and for conducting an on-site operating-level appraisal
Environmental protection - Penal Law. 2nd ed.
International Nuclear Information System (INIS)
Sack, H.J.
1980-01-01
The 18th Amendment of the Penal Law - Law on the Abatement of Environmental Delinquency - (18. StrAendG) has now been passed. It has been promulgated on March 28, 1980 and has come into force on July 1, 1980. Through this amendment, a large number of the provisions of the environmental law regarding sanctions has been incorporated into the Penal Code. Persons concerned with environmental protection and pollution control will also in future need such a textbook with comments as a guide to the most important provisions on sanctions and fixed penalties. The 18th Amendment of the Penal Code does not cover all the provisions on sanctions to be applied in the field of environmental protection, a number of regulations still remains part of other, special laws. The same applies to the provisions on penalties which are laid down in a variety of individual laws and regulations, as a comprehensive code of environmental laws still remains to be established. This first part of the textbook in loose-leaf form deals mainly with the new provisions of sections 311d, 311e, 324, and 325. The other facts of the 18th Amendment will be discussed in the second part. As the regulations have, for the most part, not been completly revised or newly inserted, parts 1/3 of the first edition of this textbook can still be used as a help in analysing the existing provisions. (orig./HP) [de
International Nuclear Information System (INIS)
1989-01-01
This pocketbook contains major federal regulations on environmental protection. They serve to protect and cultivate mankind's natural foundations of life, to preserve the environment.The environmental law is devided as follows: Constitutional law on the environment, common administrative law on the environment, special administrative law on the environment including conservation of nature and preservation of rural amenities, protection of waters, waste management, protection against nuisances, nuclear energy and radiation protection, energy conservation, protection against dangerous substances, private law relating to the environment, criminal law relating to the environment. (orig.) [de
Uranium Mill Tailings Remedial Action Project environmental protection implementation plan
International Nuclear Information System (INIS)
1994-10-01
The Uranium Mill Tailings Remedial Action (UMTRA) Project Environmental Protection Implementation Plan (EPIP) has been prepared in accordance with the requirements of the U.S. Department of Energy (DOE) Order 5400.1. The UMTRA EPIP is updated annually. This version covers the time period of 9 November 1994, through 8 November 1995. Its purpose is to provide management direction to ensure that the UMTRA Project is operated and managed in a manner that will protect, maintain, and where necessary, restore environmental quality, minimize potential threats to public health and the environment, and comply with environmental regulations and DOE policies
Uranium Mill Tailings Remedial Action Project environmental protection implementation plan
Energy Technology Data Exchange (ETDEWEB)
1994-10-01
The Uranium Mill Tailings Remedial Action (UMTRA) Project Environmental Protection Implementation Plan (EPIP) has been prepared in accordance with the requirements of the U.S. Department of Energy (DOE) Order 5400.1. The UMTRA EPIP is updated annually. This version covers the time period of 9 November 1994, through 8 November 1995. Its purpose is to provide management direction to ensure that the UMTRA Project is operated and managed in a manner that will protect, maintain, and where necessary, restore environmental quality, minimize potential threats to public health and the environment, and comply with environmental regulations and DOE policies.
Private power development and environmental protection in India
Energy Technology Data Exchange (ETDEWEB)
Das, S.; Wilbanks, T.J.
1997-12-01
This report assesses relationships between private power development in India and environmental protection in that country. The central question is whether private firms generating and distributing electricity in developing countries will do a better or a worse job in environmental protection, as a part of their overall corporate responsibility, than public-sector institutions. After reviewing the fundamental question, why it is asked, and the context in which it operates in the nation of India, this report continues with an analysis of available information, quantitative and qualitative, that can help to resolve the issues in the particular case of India. Finally, it ends with conclusions from the analysis and recommendations for reducing remaining uncertainties in the future.
Laying Stress on Energy-Saving and Environmental Protection of Thermal Generation
Institute of Scientific and Technical Information of China (English)
无
2006-01-01
@@ The most attraetive spot of the 11th Five-Year Plan is to change China's present mode of cconomic growth and take a road of circulative cconomy based on effective utilization of resources and environmental protection. Electric power as a basic industry,energy conservation and environmental protection will become one of its working cmphases in a period of time to come. In this connection, the journalist (Zhao Ran) from China Electric Power has exclusively interviewed Tang Yunlin, the former president of the China Electric Power Planning and Engineering Institute. He thought that the most important thing for power industry to save energy and protect environment is to bring about the energy conservation and environmental protection in thermal power plants rather than first devclop hydropower, nuclear power and renewable energy. His viewpoints and suggestions have been recognized by many insiders.
National practices in physical protection of nuclear materials. Regulatory basis
International Nuclear Information System (INIS)
Goltsov, V.Y.
2002-01-01
Full text: The Federal law 'On The Use Of Atomic Energy' containing the section on physical protection of nuclear materials and nuclear facilities was issued in 1995 in Russian Federation. This document became the first federal level document regulating the general requirements to physical protection (PP). The federal PP rules developed on the base of this law by Minatom of Russia and other federal bodies of the Russian Federation were put in force by the government of Russia in 1997. The requirements of the convention on physical protection of nuclear materials (INFCIRC 274) and the modern IAEA recommendations (INFCIRC/225/Rev.4) are taken into account in the PP rules. Besides, while developing the PP rules the other countries' experience in this sphere has been studied and taken into account. The PP rules are action-obligatory for all juridical persons dealing with nuclear activity and also for those who are coordinating and monitoring this activity. Nuclear activity without physical protection ensured in accordance with PP rules requirements is prohibited. The requirements of PP Rules are stronger than the IAEA recommendations. The PP rules are establishing: physical protection objectives; federal executive bodies and organizations functions an implementation of physical protection; categorization of nuclear materials; requirements for nuclear materials physical protection as during use and storage as during transportation; main goals of state supervision and ministry level control for physical protection; notification order about the facts of unauthorized actions regarding nuclear materials and facilities. Besides the above mentioned documents, there were put in force president decrees, federal laws and regulations in the field of: counteraction to nuclear terrorism; interactions in physical protection systems; military and ministerial on-site guard activities; information protection. By the initiative of Minatom of Russia the corrections were put into the
Protection goals in environmental risk assessment: a practical approach.
Garcia-Alonso, Monica; Raybould, Alan
2014-12-01
Policy protection goals are set up in most countries to minimise harm to the environment, humans and animals caused by human activities. Decisions on whether to approve new agricultural products, like pesticides or genetically modified (GM) crops, take into account these policy protection goals. To support decision-making, applications for approval of commercial uses of GM crops usually comprise an environmental risk assessment (ERA). These risk assessments are analytical tools, based on science, that follow a conceptual model that includes a problem formulation step where policy protection goals are considered. However, in most countries, risk assessors face major problems in that policy protection goals set in the legislation are stated in very broad terms and are too ambiguous to be directly applicable in ERAs. This means that risk assessors often have to interpret policy protection goals without clear guidance on what effects would be considered harmful. In this paper we propose a practical approach that may help risk assessors to translate policy protection goals into unambiguous (i.e., operational) protection goals and to establish relevant assessment endpoints and risk hypotheses that can be used in ERAs. Examples are provided to show how this approach can be applied to two areas of environmental concern relevant to the ERAs of GM crops.
10 CFR 51.80 - Draft environmental impact statement-materials license.
2010-01-01
... 10 Energy 2 2010-01-01 2010-01-01 false Draft environmental impact statement-materials license. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.80 Draft environmental impact statement—materials license. (a) The NRC staff will either prepare a draft environmental...
Internal environmental protection audits: a suggested guide for US Department of Energy facilities
International Nuclear Information System (INIS)
Barisas, S.; Polich, J.; Habegger, L.; Surles, T.
1983-08-01
This manual has been prepared for use by any DOE facility as an aid for conducting an internal environmental-protection audit. The manual is organized in modular format, with each module covering a separate area of environmental protection. The questions within each module were developed from existing DOE orders, executive orders, federal statutes, and Environmental Protection Agency (EPA) regulations issued pursuant to specific environmental legislation. A bibliography of such legislation is included at the end of this section. Each module also includes questions about a facility's use of industrial standards of practice
Advanced physical protection systems for nuclear materials
International Nuclear Information System (INIS)
Jones, O.E.
1976-01-01
Because of the increasing incidence of terrorism, there is growing concern that nuclear materials and facilities need improved physical protection against theft, diversion, or sabotage. Physical protection systems for facilities or transportation which have balanced effectiveness include information systems, access denial systems, adequate and timely response, recovery capability, and use denial methods for despoiling special nuclear materials (SNM). The role of these elements in reducing societal risk is described; however, it is noted that, similar to nuclear war, the absolute risks of nuclear theft and sabotage are basically unquantifiable. Sandia Laboratories has a major US Energy Research and Development Administration (ERDA) role in developing advanced physical protection systems for improving the security of both SNM and facilities. These activities are surveyed in this paper. A computer simulation model is being developed to assess the cost-effectiveness of alternative physical protection systems under various levels of threat. Improved physical protection equipment such as perimeter and interior alarms, secure portals, and fixed and remotely activated barriers is being developed and tested. In addition, complete prototype protection systems are being developed for representative nuclear facilities. An example is shown for a plutonium storage vault. The ERDA safe-secure transportation system for highway shipments of all significant quantities of government-owned SNM is described. Adversary simulation as a tool for testing and evaluating physical protection systems is discussed. Finally, a list of measures is given for assessing overall physical protection system performance. (author)
Advanced physical protection systems for nuclear materials
International Nuclear Information System (INIS)
Jones, O.E.
1975-10-01
Because of the increasing incidence of terrorism, there is growing concern that nuclear materials and facilities need improved physical protection against theft, diversion, or sabotage. Physical protection systems for facilities or transportation which have balanced effectiveness include information systems, access denial systems, adequate and timely response, recovery capability, and use denial methods for despoiling special nuclear materials (SNM). The role of these elements in reducing societal risk is described; however, it is noted that, similar to nuclear war, the absolute risks of nuclear theft and sabotage are basically unquantifiable. Sandia Laboratories has a major Energy Research and Development Administration (ERDA) role in developing advanced physical protection systems for improving the security of both SNM and facilities. These activities are surveyed. A computer simulation model is being developed to assess the cost-effectiveness of alternative physical protection systems under various levels of threat. Improved physical protection equipment such as perimeter and interior alarms, secure portals, and fixed and remotely-activated barriers is being developed and tested. In addition, complete prototype protection systems are being developed for representative nuclear facilities. An example is shown for a plutonium storage vault. The ERDA safe-secure transportation system for highway shipments of all significant quantities of government-owned SNM is described. Adversary simulation as a tool for testing and evaluating physical protection systems is discussed. A list of measures is given for assessing overall physical protection system performance. (auth)
Environmental protection - can it be regarded as a basic right
International Nuclear Information System (INIS)
Soell, H.
1986-01-01
The question of the necessity of an 'environmental basic right' is to be seen in connection with the doctrine of the duty of the State to protect the basic rights. Under the present law this obligation of the State applies only to third party intervention, it does not take effect if it is a matter of protecting the environment as such. Therefore the introduction of an 'environmental basic right' is necessary. (WG) [de
Independence and the Irish Environmental Protection Agency: A Comparative Assessment
Shipan, Charles
2006-01-01
The Environmental Protection Agency is one of the most prominent regulatory agencies in Ireland. Created in 1992, one of the hallmarks of this agency is its independence from other parts of government. Yet little is known about the actual extent of its independence. Independence and the Irish Environmental Protection Agency: A Comparative Assessment addresses several key questions about the agency's independence. Why was independence such a primary justification for the creation of this a...
The physical protection of nuclear material
International Nuclear Information System (INIS)
1993-09-01
Technical Committee met 21-25 June 1993 to consider changes to INFCIRC/225/Rev.2. The revised document, INFCIRC/225/Rev.3, reflects the Technical Committee recommendations for changes to the text as well as other modifications determined necessary to advance the consistency of the Categorization Table in INFCIRC/225/Rev.2 with the categorization table contained in The Convention of the Physical Protection of Nuclear Material and to reflect additional improvements presented by the experts. The recommendations presented in this IAEA document reflect a broad consensus among Member States on the requirements which should be met by systems for the physical protection of nuclear materials and facilities. It is hoped that they will provide helpful guidance for Member States
The physical protection of nuclear material
Energy Technology Data Exchange (ETDEWEB)
1993-09-01
Technical Committee met 21-25 June 1993 to consider changes to INFCIRC/225/Rev.2. The revised document, INFCIRC/225/Rev.3, reflects the Technical Committee recommendations for changes to the text as well as other modifications determined necessary to advance the consistency of the Categorization Table in INFCIRC/225/Rev.2 with the categorization table contained in The Convention of the Physical Protection of Nuclear Material and to reflect additional improvements presented by the experts. The recommendations presented in this IAEA document reflect a broad consensus among Member States on the requirements which should be met by systems for the physical protection of nuclear materials and facilities. It is hoped that they will provide helpful guidance for Member States.
Environmental protection: Streamlining petroleum exploration and production
International Nuclear Information System (INIS)
Hunt, A.M.
1991-01-01
The petroleum industry is inherently subject to a tremendous degree of volatility through fluctuation in world market prices and vagaries of world politics. A more recent stressful demand on the existing domestic petroleum exploration and production system has been the burgeoning number of environmental regulations imposed on this segment of the industry. Prudent and acceptable oil-field practices must now include agency-regulated environmental protection measures. Many independent producers are unfamiliar not only with the regulatory agencies, but also with the jargon and ambiguities, of regulations that very widely from state to state. Whereas some companies perceive only the restrictions and added cost of regulatory compliance, other companies have sought to optimize benefits while minimizing financial burdens by approaching this modern necessity more creatively, thereby discovering numerous means to become even more competitive. The domestic oil field of the 1990s will be increasingly affected by environmental regulation and public opinion. A number of companies have taken a proactive position on environmental issues. Industry examples include Louisiana Land and Exploration Company's history of wetlands conservation and Chevron's SMART (Save Money and Reduce Toxics). The future of the quality of life of this nation, and indeed the planet as a whole, lies in our capability to deal concurrently with the issues of a petroleum-based economy while protecting the natural environment that sustains life
Environmental protection and management guidebook
Energy Technology Data Exchange (ETDEWEB)
NONE
2012-11-15
In British Columbia, oil and gas activities on private or Crown land are subject to regulations in terms of environmental practices. This environmental protection and management guidebook seeks to provide information on the Oil and Gas Activities Act. All sections from the regulation: water, riparian values, wildlife and wildlife habitat, conserving soil, forest health, invasive plants, natural range barriers, seismic lines, areas to be restored and old growth management areas, resource features and cultural heritage resources, are covered in this document. The minimum acceptable operational standards and practices for oil and gas activities in British Columbia are described. This guide is intended to provide clients and stakeholders with recommendations concerning the planning phase, before any permits are applied for, and concerning permissions or authorizations generally for oil and gas activities in British Columbia.
Environmental protection - a permanent task in politics
International Nuclear Information System (INIS)
Laermann, K.H.
1978-01-01
The principles of practical environment politics can be summarized as follows: 1) Environmental policy measures do not necessarily induce restrictive effects on economic growth but also positive ones. 2) A serious conflict situation only presents itself, when with limited time available and short-term aims in mind hybernetic interrelations are disregarded and the views of an effluent society are hung onto. 3) Environmental protection measures are to be applied from the point of view of the national economy as a whole. (orig.) [de
U.S. Environmental Protection Agency's Enterprise Data Inventory
U.S. Environmental Protection Agency — Complete Enterprise Dataset Inventory (EDI) listing all agency data assets for compliance with federal Project Open Data mandate (https://project-open-data.cio.gov/).
Environmental Protection of Foreign Firms in Germany: Does the country of origin matter?
John P. Weche Geluebcke; Isabella Wedl
2013-01-01
Only recently have the aspects of pollution and environmental protection entered into the empirical literature about international firm activities. The present paper is the first firm-level study on the link between foreign ownership and environmental protection in Germany. We find that, ceteris paribus, foreign owned firms in Germany are more likely to invest in environmental protection. They also invest on a larger scale in terms of add-on measures as well as integrated measures. These resu...
An integrated approach towards future ballistic neck protection materials selection.
Breeze, John; Helliker, Mark; Carr, Debra J
2013-05-01
Ballistic protection for the neck has historically taken the form of collars attached to the ballistic vest (removable or fixed), but other approaches, including the development of prototypes incorporating ballistic material into the collar of an under body armour shirt, are now being investigated. Current neck collars incorporate the same ballistic protective fabrics as the soft armour of the remaining vest, reflecting how ballistic protective performance alone has historically been perceived as the most important property for neck protection. However, the neck has fundamental differences from the thorax in terms of anatomical vulnerability, flexibility and equipment integration, necessitating a separate solution from the thorax in terms of optimal materials selection. An integrated approach towards the selection of the most appropriate combination of materials to be used for each of the two potential designs of future neck protection has been developed. This approach requires evaluation of the properties of each potential material in addition to ballistic performance alone, including flexibility, mass, wear resistance and thermal burden. The aim of this article is to provide readers with an overview of this integrated approach towards ballistic materials selection and an update of its current progress in the development of future ballistic neck protection.
Environmental protection in exploration and production by AGIP
International Nuclear Information System (INIS)
Dossena, G.; Di Luise, G.; Ceffa, L.
1991-01-01
This paper provides a panorama of environmental protection activities being undertaken by AGIP (Italian General Petroleum Company). The Company has developed a wide-ranging program based on 20 years experience in world-wide on- and off-shore exploration and production. The research studies on technologically innovative on-site waste management, noise abatement and subsidence control and monitoring techniques are co-operative efforts involving the joint participation of national research institutions, universities and leading international petroleum companies. Given the intense oil carrier traffic along Italy's tourism dependent coastlines, one of the key projects is the creation of a national emergency plan to deal with oil spills. AGIP is also actively involved in the training of national and foreign site personnel in environmental protection techniques
Radiological Protection Miscellaneous Provisions Act 2014
International Nuclear Information System (INIS)
Irish Legislation
2014-07-01
This Act provides for the dissolution of the Radiological Protection Institute of Ireland and the transfer of all its functions, assets, liabilities and staff to the Environmental Protection Agency, to give effect to the Amendment to the Convention on the Physical Protection of Nuclear Material done at Vienna on 8 July 2005, to amend the Radiological Protection Act 1991, the Environmental Protection Agency Act 1992 and certain other enactments, and to provide for matters connected therewith
Ensminger; McCold; Webb
1999-07-01
/ Antarctica has been set aside by the international community for protection as a natural reserve and a place for scientific research. Through the Antarctic Treaty of 1961, the signing nations agreed to cooperate in protecting the antarctic environment, in conducting scientific studies, and in abstaining from the exercise of territorial claims. The 1991 signing of the Protocol on Environmental Protection to the Antarctic Treaty (Protocol) by representatives of the 26 nations comprising the Antarctic Treaty Consultative Parties (Parties) significantly strengthened environmental protection measures for the continent. The Protocol required ratification by each of the governments individually prior to official implementation. The US government ratified the Protocol by passage of the Antarctic Science, Tourism, and Conservation Act of 1997. Japan completed the process by ratifying the Protocol on December 15, 1997. US government actions undertaken in Antarctica are subject to the requirements of both the Protocol and the US National Environmental Policy Act (NEPA). There are differences in the scope and intent of the Protocol and NEPA; however, both require environmental impact assessment (EIA) as part of the planning process for proposed actions that have the potential for environmental impacts. In this paper we describe the two instruments and highlight key similarities and differences with particular attention to EIA. Through this comparison of the EIA requirements of NEPA and the Protocol, we show how the requirements of each can be used in concert to provide enhanced environmental protection for the antarctic environment. NEPA applies only to actions of the US government; therefore, because NEPA includes certain desirable attributes that have been refined and clarified through numerous court cases, and because the Protocol is just entering implementation internationally, some recommendations are made for strengthening the procedural requirements of the Protocol
International Nuclear Information System (INIS)
Dempsey, G.; Poppell, S.
1999-01-01
This poster presentation will highlight the capability of the US Environmental Protection Agency, Office of Radiation and Indoor Air to process and analyze environmental and emergency response samples in mobile radiological laboratories. Philosophy of use, construction, analytical equipment, and procedures will be discussed in the poster presentation. Accompanying the poster presentation, EPA will also have a static display of its mobile laboratories at the meeting site. (author)
Environmental protection and regulatory compliance at the Elk Hills field
International Nuclear Information System (INIS)
Chappelle, H.H.; Donahoe, R.L.; Kato, T.T.; Ordway, H.E.
1991-01-01
Environmental protection has played an integral role in the development and operation of the Elk Hills field since production at the maximum efficient rate was authorized in 1976. The field is located in a non-attainment area for California and National Ambient Air Quality Standards for two criteria pollutants and their associated precursors, is home to four endangered species, and operates within the California regulatory framework. Environmental protection and regulatory compliance is a multi-faceted program carried out through a substantial commitment of resources and workforce involvement. This paper describes the actions taken and resources employed to protect the environment, specific technologies and projects implemented, and the ongoing nature of these efforts at Elk Hills
10 CFR 51.97 - Final environmental impact statement-materials license.
2010-01-01
... 10 Energy 2 2010-01-01 2010-01-01 false Final environmental impact statement-materials license. 51...-Regulations Implementing Section 102(2) Final Environmental Impact Statements-Materials Licenses § 51.97 Final environmental impact statement—materials license. (a) Independent spent fuel storage installation (ISFSI...
Directory of Open Access Journals (Sweden)
Kai Quan Zhang
2017-12-01
Full Text Available Environmental protection firms need to improve their ability to access financing while maintaining good economic performance under mounting environmental pressures. After the integration of trade-off and stakeholder theories, we have constructed a number of mathematical models to investigate the relationship among financing decisions, environmental performance (EP, and economic performance. Unbalanced panel data from environmental protection companies listed on Chinese stock exchanges from 2007 to 2016 were collected and analyzed. Our results have confirmed that debt financing has a significant impact on short- and long-term economic performance. Firms prefer long-term debt over short-term debt to improve their financial sustainability. Internal financing is positively related to performance because the cost of financing is lower. Environmental performance can cause extra financial burden in the short run, but will improve stakeholder relations and profitability in the long run. Our study suggests that environmental performance affects the relationship between financing decisions and economic performance. When EP initiatives are high, debt financing has a greater negative influence on short-term performance, and the effect on long-term performance is mitigated. High EP also reduces the impact of internal financing on performance.
International Nuclear Information System (INIS)
2012-01-01
The actualized environmental statement 2012 for the NPP Isar covers the following issues: Direct environmental aspects: heat dissipation to the environment, water management, radioactive matter release onto the environment, environmental monitoring, waste management, operational materials supply, radioactive materials transport, safety of the nuclear facilities, remote monitoring and information system, environmental protection, communication; indirect environmental aspects; core indicators according EMAS III, development of the environmental targets and programs, reference to the valid environmental regulations, declaration of the environmental consultant.
Bowen, Natasha K; Lee, Jung-Sook; Weller, Bridget E
2007-01-01
Social environmental assessments can play a critical role in prevention planning in schools. The purpose of this study was to describe the importance of conducting social environmental assessments, demonstrate that complex social environmental data can be simplified into a useful and valid typology, and illustrate how the typology can guide prevention planning in schools. Data collected from 532 3(rd) through 5(th) graders using the Elementary School Success Profile were analyzed in the study. A latent profile analysis based on eight child-report social environmental dimensions identified five patterns of social environmental risk and protection. The classes were labeled High Protection, Moderate Protection, Moderate Protection/Peer Risk, Little Protection/Family Risk, and No Protection//School Risk. Class membership was significantly associated with measures of well-being, social behavior and academic performance. The article illustrates how the typology can be used to guide decisions about who to target in school-based preventions, which features of the social environment to target, and how much change to seek. Information is provided about online resources for selecting prevention strategies once these decisions are made.
International Nuclear Information System (INIS)
Pinchuk, M.G.
2001-01-01
On December 15, 2000 Unit 3 of Chernobyl NPP, which is the last one in Ukraine having RBMK-type reactor, was permanently shutdown before the end of its lifetime. A number of projects related to establishing infrastructure for the plant decommissioning are being implemented in compliance with the Ukraine's commitments. Decommissioning stage includes activities on fuel unloading from the cores of Unit I and Unit 3, fuel cooling in the ponds followed by the fuel transportation to the spent fuel dry storage facility (currently under construction) for its safe long-term storage. Special facilities are being created for liquid and solid radioactive waste treatment. Besides, it is planned to implement a number of projects to convert Shelter Object in environmentally safe structure. Physical protection work being an essential part of the nuclear material management is organized in line with the recommendations of the IAEA, and the Laws of Ukraine 'On Nuclear Energy Utilization and Radiation Safety', 'On Physical Protection of Nuclear Installations and Materials', 'Regulations on Physical Protection of Nuclear Materials and Installations', other codes and standards. While organizing physical protection on ChNPP decommissioning stage we have to deal with some specific features, namely: Significant amount of fuel assemblies, which are continuously transferred between various storage and operation facilities; Big amount of odd nuclear material at Shelter Object; 'Theft of new fuel fragments from the central hall of the Shelter Object in 1995 with the intention of their further sale. The thieves were detained and sentenced. The stolen material was withdrawn, that prevented its possible proliferation and illicit trafficking. At present physical protection of ChNPP does not fully satisfy the needs of the decommissioning stage and Ukraine's commitments on non-admission of illicit trafficking. Work is carried out, aimed to improve nuclear material physical protection, whose main
Environmental protection in the Alligator Rivers Region
International Nuclear Information System (INIS)
Riley, G.
1989-01-01
One of a series of articles on the work of the Office of the Supervising Scientist for the Alligator Rivers Region (OSS) and its Alligator Rivers Region Research Institute (ARRRI), this discusses the environmental protection function of the OSS and the role of the ARRRI in achieving this
International Nuclear Information System (INIS)
Smolej, M.
1999-01-01
The physical protection and security of nuclear facilities and materials concerns utilities, manufactures, the general public, and those who are responsible for licensing and regulating such facilities. The requirements and process to ensure an acceptable physical protection and security system have been evolutionary in nature. This paper reviews the first step of such process: the State's safeguards system and the international safeguards system of the International Atomic Energy Agency (IAEA), including the relationship between these two safeguards systems. The elements of these systems that are reviewed include the State System of Accounting for and Control of Nuclear Material, physical protection measures, and containment and surveillance measures. In addition, the interactions between the State, the facility operator, and the IAEA are described. The paper addresses the IAEA safeguards system, including material accountancy and containment and surveillance; the State safeguards system, including material control and accountancy, and physical protection; the role of the IAEA in physical protection; a summary of safeguards system interactions.(author)
Evaluation Of The Risk Of Financing Projects Of Environmental Protection
Directory of Open Access Journals (Sweden)
Gabriela Cornelia PICIU
2012-03-01
Full Text Available The research project approaches multidimensionally the financing of environmental protection from the perspective of directing, correlating and consolidating the financial flows circumscribed to the regeneration of an economy affected by environmental deterioration due to the very activities defining the economic mechanisms and circuits. The purpose of the project is to identify, by scientific, methodological and empirical analysis of the concepts, principles and arguments imposed by the economic theory, the risks of financing the projects of environmental projects and to evaluate their effects because their neglecting, individual approach or erroneous dimensioning might have unfavourable and unforeseen consequences in terms of the efficiency of the environmental strategies and policies. The objective of the study is the reveal the interdependency and interaction between the flows and circuits financing the environmental projects, showing the necessity for punctual, distributive, correlative and multiplicative financing of the environmental protection. This must be done from an expanded and prospective spatial and temporal vision by a compositional approach of the risk for environmental investments within the complex network of the social, economic and financial risks generated by the global system of the human praxis focused on the binomial of the human-environment interdependence.
40 CFR 191.15 - Individual protection requirements.
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Individual protection requirements. 191.15 Section 191.15 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) RADIATION... Individual protection requirements. (a) Disposal systems for waste and any associated radioactive material...
One decade after Chernobyl: Environmental impact and prospects for the future. Working material
International Nuclear Information System (INIS)
1996-01-01
One decade after the accident at the Chernobyl nuclear power plant, the levels of radioactive contamination of the affected territories are generally well known. Through the impetus from national and international organizations, scientific and technical studies are being undertaken in order to reach a better understanding of the circumstances of the accident, the behavior of radioactive materials in different environmental media and the most efficient ways of decontamination. Doses received by populations have been and continue to be assessed. Taking into account the completed and ongoing studies by other organizations as well as the results of the International Chernobyl Project completed in 1991, the IAEA formulated, in co-operation with the Institut de Protection et de Surete Nucleaire (IPSN) in France, a project focusing on the environmental impact of the Chernobyl accident. The project aimed to make the findings of the scientists understandable to and relevant for the decision makers, who form the target group. Thus the study focused on the environmental impact in the future and was complementary to the other studies performed. It was a synthesis of available material and reports. Refs, figs, tabs
One decade after Chernobyl: Environmental impact and prospects for the future. Working material
Energy Technology Data Exchange (ETDEWEB)
NONE
1997-12-31
One decade after the accident at the Chernobyl nuclear power plant, the levels of radioactive contamination of the affected territories are generally well known. Through the impetus from national and international organizations, scientific and technical studies are being undertaken in order to reach a better understanding of the circumstances of the accident, the behavior of radioactive materials in different environmental media and the most efficient ways of decontamination. Doses received by populations have been and continue to be assessed. Taking into account the completed and ongoing studies by other organizations as well as the results of the International Chernobyl Project completed in 1991, the IAEA formulated, in co-operation with the Institut de Protection et de Surete Nucleaire (IPSN) in France, a project focusing on the environmental impact of the Chernobyl accident. The project aimed to make the findings of the scientists understandable to and relevant for the decision makers, who form the target group. Thus the study focused on the environmental impact in the future and was complementary to the other studies performed. It was a synthesis of available material and reports. Refs, figs, tabs.
Evolution of environmental protection strategies in the Soviet Union
International Nuclear Information System (INIS)
Lesperance, A.M.
1992-05-01
In performing this work, interviews were conducted with members of the Supreme Soviet Committee for Rational Use of Natural Resources, Moscow, City Council, and St. Petersburg City Council. These officials provided their views on the current status of environmental protection in the former Soviet Union. Literature published in English, although limited, supplemented these discussions. In addition, a literature search was conducted of recent articles about this topic. Although the research for this paper was conducted before and during the August 1991 coup attempt in the Soviet Union, and after the formation of the Commonwealth of Independent States (CIS), many of the observations expressed in this report may be relevant to the new states. This report provides to historical perspective on the barriers encountered while attempting to develop environmental policy in the former Soviet Union and establishes a context for problems facing the new states in developing their environmental policies. Organization changes that have occurred in environmental protection since the August coup are included to the extent they are known
Objectives, Scope and Organization of Radiological and Environmental Protection in Chile
International Nuclear Information System (INIS)
Massalleras, E.; Zamorano, W.
1979-01-01
The report covers the activity of the Radiation Protection Department concerning radiation protection of persons involved in the application of radiation sources and the monitoring of environmental radioactivity. (author)
Environmental safety providing during heat insulation works and using thermal insulation materials
Directory of Open Access Journals (Sweden)
Velichko Evgeny
2017-01-01
Full Text Available This article considers the negative effect of thermal insulating materials and products on human health and environment pollution, particularly in terms of the composition of environmentally hazardous construction products. The authors have analyzed the complex measures for providing ecological safety, sanitary and epidemiological requirements, rules and regulations both during thermal insulation works and throughout the following operation of buildings and premises. The article suggests the protective and preventive measures to reduce and eliminate the negative impact of the proceeding of thermal insulation works on the natural environment and on human health.
Dunn, Kristina; Gaetke, Lisa; Stephenson, Tammy; Brewer, Dawn
2017-01-01
The aging process makes older adults vulnerable to the detrimental health effects of environmental contaminants. Our study assessed older adults' perceptions regarding diet as protective against environmental contaminants, levels of concern about exposure to environmental contaminants, and interest in learning about protective food-related…
Hierarchically Nanostructured Materials for Sustainable Environmental Applications
Directory of Open Access Journals (Sweden)
Zheng eRen
2013-11-01
Full Text Available This article presents a comprehensive overview of the hierarchical nanostructured materials with either geometry or composition complexity in environmental applications. The hierarchical nanostructures offer advantages of high surface area, synergistic interactions and multiple functionalities towards water remediation, environmental gas sensing and monitoring as well as catalytic gas treatment. Recent advances in synthetic strategies for various hierarchical morphologies such as hollow spheres and urchin-shaped architectures have been reviewed. In addition to the chemical synthesis, the physical mechanisms associated with the materials design and device fabrication have been discussed for each specific application. The development and application of hierarchical complex perovskite oxide nanostructures have also been introduced in photocatalytic water remediation, gas sensing and catalytic converter. Hierarchical nanostructures will open up many possibilities for materials design and device fabrication in environmental chemistry and technology.
Dunn, Kristina; Gaetke, Lisa; Stephenson, Tammy; Brewer, Dawn
2017-08-01
The aging process makes older adults vulnerable to the detrimental health effects of environmental contaminants. Our study assessed older adults' perceptions regarding diet being protective against environmental contaminants, their levels of concern about exposure, and their interest in learning about protective food-related strategies. A needs assessment to collect such information has not been conducted among older adults. Health fair survey results showed that they perceived diet as beneficial against contaminants, were concerned about health implications of exposure, and were interested in learning how to protect health through diet-related strategies. Results suggest that a nutrition-focused curriculum addressing how dietary strategies can help protect against environmental contaminants is needed for Extension professionals.
Quina, Margarida J; Bordado, João C M; Quinta-Ferreira, Rosa M
2011-01-01
Waste management and environmental protection are mandatory requirements of modern society. In our study, air pollution control (APC) residues from municipal solid waste incinerators (MSWI) were considered as a mixture of fly ash and fine particulate solids collected in scrubbers and fabric filters. These are hazardous wastes and require treatment before landfill. Although there are a number of treatment options, it is highly recommended to find practical applications rather than just dump them in landfill sites. In general, for using a construction material, beyond technical specifications also soil and surface water criteria may be used to ensure environmental protection. The Dutch Building Materials Decree (BMD) is a valuable tool in this respect and it was used to investigate which properties do not meet the threshold criteria so that APC residues can be further used as secondary building material. To this end, some scenarios were evaluated by considering release of inorganic species from unmoulded and moulded applications. The main conclusion is that the high amount of soluble salts makes the APC residues a building material prohibited in any of the conditions tested. In case of moulding materials, the limits of heavy metals are complied, and their use in Category 1 would be allowed. However, also in this case, the soluble salts lead to the classification of "building material not allowed". The treatments with phosphates or silicates are able to solve the problem of heavy metals, but difficulties with the soluble salts are still observed. This analysis suggests that for APC residues to comply with soil and surface water protection criteria to be further used as building material at least a pre-treating for removing soluble salts is absolutely required. Copyright © 2011 Elsevier Ltd. All rights reserved.
International Nuclear Information System (INIS)
Woo, Tae Ho
2016-01-01
Highlights: • New kind of radiological protection concept is introduced. • The shielding concept is accompanied with the water spray system. • The solubility of radioactive material could be used for protection. • Practical method is suggested. • The system is variable by the random number quantities. - Abstract: The environmental defense system in the nuclear power plants (NPPs) is investigated in the aspect of the environmental scale incorporated with atmospheric and marine sectors. The object is to find the radiological protection protocol in the environmental scale which is different from the conventional three kinds of radiological protection principles. Conventional laboratory based principles are not applicable in the mass failure accident such as the case of Fukushima disaster. This newly introduced protocol has many useful applications for the nature treatment oriented methods where the atmospheric protection of dispersion and dissolution is performed first and the filtration of seawater would follow. The maximum and minimum values in fan velocity are about 7.5 m/s and 5.3 m/s respectively. For the spray system, the mole fractions by the water spray are shown where maximum and minimum values are 6.57 × 10 −17 and 8.84 × 10 −19 moles respectively. The maximum and minimum values of discharged values in filtration are 99.4 and 1.3 square velocity (m/s), respectively. The total and general radiological protection concept is suggested in the nanoscopic molecular scale performance.
Environmental Evaluation of Building Materials of 5 Slovak Buildings
Porhincak, Milan; Estokova, Adriana
2013-11-01
Building activity has recently led to the deterioration of environment and has become unsustainable. Several strategies have been introduced in order to minimize consumption of energy and resulting CO2 emissions having their origin in the operational phase. But also other stages of Life Cycle should are important to identify the overall environmental impact of construction sector. In this paper 5 similar Slovak buildings (family houses) were analyzed in terms of environmental performance of building materials used for their structures. Evaluation included the weight of used materials, embodied energy and embodied CO2 and SO2 emissions. Analysis has proven that the selection of building materials is an important factor which influences the environmental profile. Findings of the case study indicated that materials like concrete, ceramic or thermal insulation materials based on polystyrene and mineral wool are ones with the most negative environmental impact.
International Nuclear Information System (INIS)
2009-01-01
The Norwegian Radiation Protection Authority (NRPA) established an Environmental Unit at the Polar Environmental Centre in Tromsoe in the summer of 1999. The aim of establishing the unit in Tromsoe was to further the monitoring programmes of the NRPA in the Arctic and to the promote collaboration within the Polar Environmental Centre. Over the last 10 years, the NRPA's Environmental Unit has undertaken a range of research and monitoring activities in close cooperation with other institutes in the Polar Environmental Centre that have helped to further understand the current radiological status of the Norwegian Arctic. (Author)
Legal significance of environmental protection in foreign investments law
Directory of Open Access Journals (Sweden)
Divljak Drago
2013-01-01
Full Text Available The paper presents the analysis of conceptual interaction between foreign investments and environmental protection, as well as its legal repercussions. A part of the paper has been directed towards critical review of the attempt of legal regulating of these relationships at an international level. A special attention was paid to the treatment of the environment in our foreign investments law. It can be concluded that the dominant paradigm of the future direction of development in this field is going to be the strengthening of the bond between international investments and environmental protection. It is insisted on the attitude that our law needs to approach adequately to the matter of legal valorization of the environmental protection issue. This requires the creating of a complex, coherent approach that should be based on adequate legal superstructure and amendments to the existing Law on Foreign Investments. The main direction of changes implies that the current obligation of foreign investors in this field should be raised onto a higher level and foreign investments should be placed in the function of accomplishing of the concept of sustainable development. However, such an approach has to be accompanied by appropriate mechanism of control and supervision in the given field, if its full effectiveness is to be achieved.
Supervision of Waste Management and Environmental Protection at the Swedish Nuclear Facilities 2001
Persson, M
2003-01-01
The report summarizes the supervision of waste management and environmental protection at the nuclear facilities that was carried out by the Swedish Radiation Protection Authority in 2001. A summary of the inspections and a description of important issues connected with the supervision of the nuclear facilities are given.The inspections during 2001 have focused on theme inspections of waste management, environmental inspections considering the environmental monitoring at the Swedish nuclear facilities and review safety analysis and research programs from the Swedish Nuclear Fuel and Waste Management Co.The Swedish Radiation Protection Authority finds that the operations are mainly performed according to current regulations
Environmental protection: Researches in National Inst. of Radiological Sciences
International Nuclear Information System (INIS)
Fuma, S.; Ban-nai, T.; Doi, M.; Fujimori, A.; Ishii, N.; Ishikawa, Y.; Kawaguchi, I.; Kubota, Y.; Maruyama, K.; Miyamoto, K.; Nakamori, T.; Takeda, H.; Watanabe, Y.; Yanagisawa, K.; Yasuda, T.; Yoshida, S.
2011-01-01
Some studies for radiological protection of the environment have been made at the National Inst. of Radiological Sciences (NIRS). Transfer of radionuclides and related elements has been investigated for dose estimation of non-human biota. A parameter database and radionuclide transfer models have been also developed for the Japanese environments. Dose (rate)-effect relationships for survival, growth and reproduction have been investigated in conifers, Arabidopsis, fungi, earthworms, springtails, algae, duckweeds, daphnia and medaka. Also genome-wide gene expression analysis has been carried out by high coverage expression profiling (HiCEP). Effects on aquatic microbial communities have been studied in experimental ecosystem models, i.e., microcosms. Some effects were detected at a dose rate of 1 Gy day -1 and were likely to arise from inter-species interactions. The results obtained at NIRS have been used in development of frameworks for environmental protection by some international bodies, and will contribute to environmental protection in Japan and other Asian countries. (authors)
Training for effective environmental protection in the nuclear industry
International Nuclear Information System (INIS)
Parkinson, D.; Brake, J.; Hickman, C.; Tamm, J.
2007-01-01
This paper examines the role of environmental training in the delivery of effective environmental protection programs for construction projects in the nuclear industry. The paper uses a case study approach, based on Point Lepreau Generating Station's Refurbishment Project, to demonstrate how the underpinning principles of 'training, awareness and competence' can be delivered within a structured environmental management framework, to achieve sustained excellence in environmental management and performance. Key issues addressed by the paper include the early identification of different target audiences, making effective use of communication themes, and the importance of reinforcement and follow-up in support of training goals. (author)
International Nuclear Information System (INIS)
Huang, Chin-wei; Chiu, Yung-ho; Fang, Wei-ta; Shen, Neng
2014-01-01
Previous studies involving environmental performance purely focus on analyzing environmental or waste treatment efficiencies. This study combines various aspects of environmental protection and establishes a non-radial network DEA approach to evaluate the performance of an environmental protection system. The empirical methodology assumes that the system consists of three stages: administrative, executive processes, and protection effectiveness. The executive process includes waste treatment and pollution auditing divisions. In addition to assessing efficiencies, the empirical evaluation further explores the internal and external influences on performances and contributes implications and suggestions for environmental policy makers. The proposed model is utilized to gauge the performance of an environmental protection system for 20 municipalities in Taiwan. The results indicate the following: (1) for improving environmental quality, the government needs to put forth greater efforts in environmental audits; (2) improving productivity per unit so as to increase achievements in the executive process is more important for raising performance on environmental work, in addition to increasing workers and equipment for environmental protection; (3) a high degree of industrialization negatively influences administrative efficiency and educated residents have a greater comprehension for administrative operations, which can help in efficient budget utilization. - Highlights: • A non-radial network DEA approach to evaluate the Performance of Environmental Protection System. • The performance of waste treatment performs better than the efficiency of auditing. • Governmental expenditure is more efficiently utilized in the administrative process. • The effectiveness of achieved protection is a critical indicator for revealing environmental quality in a region
Middleton, Beth Rose
2013-11-01
Protection of culturally important indigenous landscapes has become an increasingly important component of environmental management processes, for both companies and individuals striving to comply with environmental regulations, and for indigenous groups seeking stronger laws to support site protection and cultural/human rights. Given that indigenous stewardship of culturally important sites, species, and practices continues to be threatened or prohibited on lands out of indigenous ownership, this paper examines whether or not indigenous people can meaningfully apply mainstream environmental management laws and processes to achieve protection of traditional sites and associated stewardship activities. While environmental laws can provide a "back door" to protect traditional sites and practices, they are not made for this purpose, and, as such, require specific amendments to become more useful for indigenous practitioners. Acknowledging thoughtful critiques of the cultural incommensurability of environmental law with indigenous environmental stewardship of sacred sites, I interrogate the ability of four specific environmental laws and processes-the Uniform Conservation Easement Act; the National Environmental Policy Act and the California Environmental Quality Act; the Pacific Stewardship Council land divestiture process; and Senate Bill 18 (CA-2004)-to protect culturally important landscapes and practices. I offer suggestions for improving these laws and processes to make them more applicable to indigenous stewardship of traditional landscapes.
Rio conference global environmental protection Agenda 21
Energy Technology Data Exchange (ETDEWEB)
Pinchera, G. (ENEA, Rome (Italy). Area Energia, Ambiente e Salute)
1992-10-01
In reviewing the work packages included in the Rio Earth's Summit Agenda 21, intended as an activities guideline for international cooperation to ensure environmental protection with sustainable growth for all nations, this paper points out the areas which present the greatest obstacles in the establishment of common accords and discusses the directions being taken to surmount these obstacles. A major obstacle concerns uncertaindes in specifying limits on carbon dioxide emissions and their effects on world climate. Another concerns suitable methods to help finance effective technology transfer to developing countries. With regard to the former problem, a 'no regret' approach has been proposed to limit current C02 reduction interventions to those levels which, in all certainty, would not incur any future regrets once scientific knowledge has advanced enough to allow more accurate assessments of greenhouse gas/climate change inter-relationships. With regard to the latter problem, attempts are being made to reduce possible negative impacts on the petroleum industry due to energy surcharges suggested as a source of funding for technology transfer/environmental protection programs.
Stepwise strategic environmental management in marine protected area
Directory of Open Access Journals (Sweden)
A. Padash
2016-01-01
Full Text Available In recent decades, necessity to protect environment has been a serious concern for all people and international communities. In appropriate development of human economic activities, subsistence dependence of the growing world population on nature decreases the natural diversity of ecosystems and habitats day by day and provides additional constraints for life and survival of wildlife. As a result, implementation of programs to protect species and ecosystems is of great importance. The current study was carried out to implement a comprehensive strategic environmental management plan in the Mond protected area in southern Iran. Accordingly, the protected area was zoned using multi criteria decision method. According to the numerical models, fifteen data layer were obtained on a scale of 1:50,000. The results revealed that 28.35% out of the entire study area belongs to nature conservation zone. In the following step, in order to offer the strategic planning using strength, weaknesses, opportunities and threats method, a total number of 154 questionnaires were prepared and filled by the relevant experts. For this purpose, after identifying the internal and external factors, they were weighted in the form of matrices as; internal factor evaluation and external factor evaluation. Analytical hierarchy process and expert choice software were applied to weight the factors. At the end, by considering the socioeconomic and environmental issues, the strategy of using protective strategies in line with international standards as well as a strong support of governmental national execution with a score of 6.05 was chosen as the final approach.
Stepwise strategic environmental management in marine protected area
International Nuclear Information System (INIS)
Padash, A.; Jozi, S. A.; Nabavi, S. M. B.; Dehzad, B.
2016-01-01
In recent decades, necessity to protect environment has been a serious concern for all people and international communities. In appropriate development of human economic activities, subsistence dependence of the growing world population on nature decreases the natural diversity of ecosystems and habitats day by day and provides additional constraints for life and survival of wildlife. As a result, implementation of programs to protect species and ecosystems is of great importance. The current study was carried out to implement a comprehensive strategic environmental management plan in the Mond protected area in southern Iran. Accordingly, the protected area was zoned using multi criteria decision method. According to the numerical models, fifteen data layer were obtained on a scale of 1:50,000. The results revealed that 28.35% out of the entire study area belongs to nature conservation zone. In the following step, in order to offer the strategic planning using strength, weaknesses, opportunities and threats method, a total number of 154 questionnaires were prepared and filled by the relevant experts. For this purpose, after identifying the internal and external factors, they were weighted in the form of matrices as; internal factor evaluation and external factor evaluation. Analytical hierarchy process and expert choice software were applied to weight the factors. At the end, by considering the socioeconomic and environmental issues, the strategy of using protective strategies in line with international standards as well as a strong support of governmental national execution with a score of 6.05 was chosen as the final approach.
The innovative application studty on eco-packaging design and materials
Directory of Open Access Journals (Sweden)
Cui Yong Min
2016-01-01
Full Text Available The paper solves the increasingly deteriorate environmental problems by positively exploring how to utilize and develop eco-packaging design reasonably. The paper explores an effective method that combines eco-packaging and environmental protection materials, hoping to define the sustainable development road of packaging design. The paper is centered on the design application of eco-packaging and environmental protection materials, applies and analyzes the method to obtain innovative design requirements and development tendency of eco-packaging design by analyzing status and significance of eco-packaging design, combining with the development and main types of eco-packaging packaging materials, and based on the achievements acquired by eco-packaging and environmental protection materials. Meanwhile, the paper also reveals mutual dependence and mutual promotion of eco-packaging design and eco-packaging materials.
International Nuclear Information System (INIS)
Thomas, I.M.
1991-01-01
Potassium dihydrogen phosphate (KDP) crystals have been used as harmonic converters on the Nova laser at LLNL for over six years. All crystals were coated with a single layer, quarterwave AR coating of porous silica with a refractive index of 1.22. This was prepared by a sol-gel process and was applied from a colloidal suspension by spin coating at room temperature. A few crystals were also coated with a methyl silicone coating prior to the application of the AR coating for environmental protection. The initial optical performance of all crystals was very good but there has been some deterioration over the years because of environmental and laser damage degradation. The deterioration in the silicone samples was, however, much less than the others. We are now in the process of replacing all ten KDP arrays with new crystals and will apply the silicone undercoat to all samples. Recently we have been evaluating a new perfluorinated organic polymer coating which has a refractive index of 1.29. This material is soluble in fluorinated solvents and can be applied by dip coating from solution at room temperature. We hope that this can provide environmental protection when applied to KDP and also act as an AR coating at the same time. The optical performance is not as good as our porous silica because of the higher index; about 0.3% reflection per surface is obtained. 4 refs., 10 figs., 1 tab
Radiation protection programmes for the transport of radioactive material. Safety guide
International Nuclear Information System (INIS)
2007-01-01
This Safety Guide provides guidance on meeting the requirements for the establishment of radiation protection programmes (RPPs) for the transport of radioactive material, to optimize radiation protection in order to meet the requirements for radiation protection that underlie the Regulations for the Safe Transport of Radioactive Material. This Guide covers general aspects of meeting the requirements for radiation protection, but does not cover criticality safety or other possible hazardous properties of radioactive material. The annexes of this Guide include examples of RPPs, relevant excerpts from the Transport Regulations, examples of total dose per transport index handled, a checklist for road transport, specific segregation distances and emergency instructions for vehicle operators
Energy Technology Data Exchange (ETDEWEB)
Kopsick, D.A., E-mail: kopsick.deborah@epa.gov [US Environmental Protection Agency, Washington, DC (United States)
2011-07-15
The international metal processing industries are very concerned about the importation of scrap metal contaminated with radioactive materials. When radioactive sources fall out of regulatory control, improper handling can cause serious injury and death. There is no one way to address this problem and various US governmental and industry entities have developed radiation source control programmes that function within their authorities. The US Environmental Protection Agency's (EPA) mission is to protect public health and the environment. To ensure this protection, EPA's approach to orphan sources in scrap metal has focused on regaining control of lost sources and preventing future losses. EPA has accomplished this through a number of avenues including training development, product stewardship, identification of non-radiation source alternatives, physical tagging of sources, field testing of innovative radiation detection instrumentation and development of international best practices. In order to achieve its goal of enhanced control on contaminated scrap metal and orphaned radioactive sources, EPA has forged alliances with the metals industry, other Federal agencies, state governments and the IAEA. (author)
Lee, Ji Yeon
2016-10-01
Transmission of tuberculosis (TB) is a recognized risk to patients and healthcare workers in healthcare settings. The literature review suggests that implementation of combination control measures reduces the risk of TB transmission. Guidelines suggest a three-level hierarchy of controls including administrative, environmental, and respiratory protection. Among environmental controls, installation of ventilation systems is a priority because ventilation reduces the number of infectious particles in the air. Natural ventilation is cost-effective but depends on climatic conditions. Supplemented intervention such as air-cleaning methods including high efficiency particulate air filtration and ultraviolet germicidal irradiation should be considered in areas where adequate ventilation is difficult to achieve. Personal protective equipment including particulate respirators provides additional benefit when administrative and environmental controls cannot assure protection.
The environmental problems in urban communities and the protection of the environment in Korea.
Kim, I K
1994-07-01
Korea's urban environmental problems, specifically air and water pollution, government environmental policies, and the role of nongovernmental organizations (NGOs) in protecting the environment are described and discussed. Korea's rapid industrialization and urbanization between 1961 and 1985 led to an increased volume of waste and air pollution. Automobiles increased in number from 29,234 in 1961 to 1,113,430 in 1985. In the same period, the number of factories with at least five employees rose from 15,204 to 44,037. The volume of chemical materials and agricultural chemicals dramatically increased. Household wastes in urban areas increased from 26,831 tons per day in 1978 to 61,072 tons per day in 1985. Industrial waste rose from 13,130 to 33,349 tons per day in 1985. Respiratory diseases are precipitated by exposure to sulphur dioxide, which is produced during cooking and heating with coal briquets; to nitrogen dioxide from automobile exhaust; and to carbon monoxide from coal briquets. Indoor air pollution from particles such as radon, asbestos, cigarette smoke, fungus, and bacteria also impacts on health. Tolerance limits have been reached or surpassed in many cities, particularly in Seoul. Air pollution is worse during the winter. The poor are particularly affected because of the continued use of coal briquets for heating. Industry contributes to water pollution. The volume of industrial waste water quadrupled between 1980 and 1990. In Seoul, however, population size directly contributes to 64.3% of water pollution, and the remaining 35.2% is from factories. Although livestock contributes to only 0.5% of water pollution, livestock drainage contributes to 36.3% of chemical materials in polluted water. Biological oxygen demand has also exceeded tolerance limits. Water reservoirs contain toxic chemicals such as lead, copper, mercury, arsenic, phenol, phosphorus, and nitrogen, which take a longer time to affect health. The Anti-Pollution Law of 1963 and the
Recent publications on environmental law
International Nuclear Information System (INIS)
Lohse, S.
1991-01-01
The bibliography contains references to publications covering the following subject fields: General environmental law; environmental law in relation to constitutional law, administrative law, procedural law, revenue law, criminal law, private law, industrial law; law of regional development; nature conservation law; law on water protection; waste management law; law on protection against harmful effects on the environment; atomic energy law and radiation protection law; law of the power industry and the mining industry; laws and regulations on hazardous material and environmental hygiene. (orig.) [de
Energy Technology Data Exchange (ETDEWEB)
Runhaar, Hens, E-mail: h.a.c.runhaar@uu.nl [Utrecht University, Copernicus Institute of Sustainable Development, P.O. Box 80,115, 3508 TC Utrecht (Netherlands); Laerhoven, Frank van, E-mail: vanLaerhoven@uu.nl [Utrecht University, Copernicus Institute of Sustainable Development, P.O. Box 80,115, 3508 TC Utrecht (Netherlands); Driessen, Peter, E-mail: p.driessen@uu.nl [Utrecht University, Copernicus Institute of Sustainable Development, P.O. Box 80,115, 3508 TC Utrecht (Netherlands); Arts, Jos, E-mail: e.j.m.m.arts@rug.nl [University of Groningen, Faculty of Planning, P.O. Box 800, 9700 AV Groningen (Netherlands)
2013-02-15
Environmental assessment (EA) aims to enhance environmental awareness and to ensure that environmental values are fully considered in decision-making. In the EA arena, different discourses exist on what EA should aim for and how it functions. We hypothesise that these discourses influence its application in practice as well as its effectiveness in terms of achieving the above goals. For instance, actors who consider EA as a hindrance to fast implementation of their projects will probably apply it as a mandatory checklist, whereas actors who believe that EA can help to develop more environmentally sound decisions will use EIA as a tool to design their initiatives. In this paper we explore discourses on EA in The Netherlands and elaborate on their implications for EA effectiveness. Based on an innovative research design comprising an online survey with 443 respondents and 20 supplementary semi-structured interviews we conclude that the dominant discourse is that EA is mainly a legal requirement; EAs are conducted because they have to be conducted, not because actors choose to do so. EA effectiveness however seems reasonably high, as a majority of respondents perceive that it enhances environmental awareness and contributes to environmental protection. However, the 'legal requirement' discourse also results in decision-makers seldom going beyond what is prescribed by EA and environmental law. Despite its mandatory character, the predominant attitude towards EA is quite positive. For most respondents, EA is instrumental in providing transparency of decision-making and in minimising the legal risks of not complying with environmental laws. Differences in discourses seldom reflect extreme opposites. The 'common ground' regarding EA provides a good basis for working with EA in terms of meeting legal requirements but at the same time does not stimulate creativity in decision-making or optimisation of environmental values. In countries characterised by
International Nuclear Information System (INIS)
Runhaar, Hens; Laerhoven, Frank van; Driessen, Peter; Arts, Jos
2013-01-01
Environmental assessment (EA) aims to enhance environmental awareness and to ensure that environmental values are fully considered in decision-making. In the EA arena, different discourses exist on what EA should aim for and how it functions. We hypothesise that these discourses influence its application in practice as well as its effectiveness in terms of achieving the above goals. For instance, actors who consider EA as a hindrance to fast implementation of their projects will probably apply it as a mandatory checklist, whereas actors who believe that EA can help to develop more environmentally sound decisions will use EIA as a tool to design their initiatives. In this paper we explore discourses on EA in The Netherlands and elaborate on their implications for EA effectiveness. Based on an innovative research design comprising an online survey with 443 respondents and 20 supplementary semi-structured interviews we conclude that the dominant discourse is that EA is mainly a legal requirement; EAs are conducted because they have to be conducted, not because actors choose to do so. EA effectiveness however seems reasonably high, as a majority of respondents perceive that it enhances environmental awareness and contributes to environmental protection. However, the ‘legal requirement’ discourse also results in decision-makers seldom going beyond what is prescribed by EA and environmental law. Despite its mandatory character, the predominant attitude towards EA is quite positive. For most respondents, EA is instrumental in providing transparency of decision-making and in minimising the legal risks of not complying with environmental laws. Differences in discourses seldom reflect extreme opposites. The ‘common ground’ regarding EA provides a good basis for working with EA in terms of meeting legal requirements but at the same time does not stimulate creativity in decision-making or optimisation of environmental values. In countries characterised by less
Nuclear Materials Stewardship Within the DOE Environmental Management Program
International Nuclear Information System (INIS)
Bilyeu, J. D.; Kiess, T. E.; Gates, M. L.
2002-01-01
The Department of Energy (DOE) Environmental Management (EM) Program has made significant progress in planning disposition of its excess nuclear materials and has recently completed several noteworthy studies. Since establishment in 1997, the EM Nuclear Material Stewardship Program has developed disposition plans for excess nuclear materials to support facility deactivation. All nuclear materials have been removed from the Miamisburg Environmental Management Project (Mound), and disposition planning is nearing completion for the Fernald Environmental Management Project and the Rocky Flats Environmental Technology Site. Only a few issues remain for materials at the Hanford and Idaho sites. Recent trade studies include the Savannah River Site Canyons Nuclear Materials Identification Study, a Cesium/Strontium Management Alternatives Trade Study, a Liquid Technical Standards Trade Study, an Irradiated Beryllium Reflectors with Tritium study, a Special Performance Assessment Required Trade Study, a Neutron Source Trade Study, and development of discard criteria for uranium. A Small Sites Workshop was also held. Potential and planned future activities include updating the Plutonium-239 storage study, developing additional packaging standards, developing a Nuclear Material Disposition Handbook, determining how to recover or dispose of Pu-244 and U-233, and working with additional sites to define disposition plans for their nuclear materials
[Environmental protection techniques used in the federal state of Baden-Württemberg in Germany].
Vasilić, Zelimira
2006-09-01
Within the framework of the programme "Partnership for Sustainable Development" The Ministry of Environment of the German Federal State of Baden-Württemberg has come up with a project "Study Visit--Environmental Protection Techniques". It was intended as a three-week study visit for environmental protection experts from Central and Eastern European Countries (CEEC) to learn about the environmental protection techniques used in this federal state. Visits were paid to companies producing, applying or installing plants based on the state-of-the-art environmental protection techniques. The project started in 2005 and will last five years. The first visit to Baden-Württemberg was scheduled for 25 September-14 October 2005 for 12 experts from 12 countries: Bulgaria, Croatia, Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia and Ukraine.
Comparative analysis of the EU criminal law for environmental protection and the Albanian one
Directory of Open Access Journals (Sweden)
Iris Petrela
2016-03-01
Full Text Available This paper consists of two main parts where the first one presents the path how the environmental issue was included in the primary legislation of the European Union (EU, starting this theoretical panorama from the first founding treaty – Treaty of Rome, in 1957. It shows that with the passing of years the environmental protection has become one of the most important fields of action of the European Community supported by the primary and secondary legislation of the EU and its several bodies with competencies in this field. The second part of the paper starts with the commitments on the environmental protection that the Albanian state has made upon signature and entrance into force of the Stabilisation and Association Agreement with the EU. In addition, this article presents a summary of the legislative activity in Albania regarding environmental protection in the last two decades with special focus on the time period after the approval of the current Constitution of 1998, which is the basis and origin of every legislative initiative. Furthermore, there are presented the key features of the Albanian environmental legislation, as well as the protection mechanism from the criminal legislation point of view. The presentation of the European and national reality with special focus on environmental protection serves to a comparative purpose between the two models. It also serves to draw conclusions and propose suggestions on how the Albanian legislation should be developed and improved in order to be in line with that of the European Union and effective in practice to serve the ultimate goal of environmental protection and prevention from further environmental degradation.
Application of radiological protection measures to meet different environmental protection criteria
International Nuclear Information System (INIS)
Copplestone, D.
2012-01-01
The International Commission on Radiological Protection (ICRP) recognises that there is no simple or single universal definition of ‘environmental protection’, and that the concept differs from country to country and from one circumstance to another. However, there is an increasing need to be able to demonstrate that the environment is protected from radioactive substances released under authorisation for various reasons, such as for wildlife conservation requirements, or wildlife management for commercial reasons, or simply as part of pollution control. The Commission is developing the concept of Representative Organisms, which may be identified from any specific legal requirements or from more general requirements to protect local habitats or ecosystems. Such organisms may be the actual objects of protection or they may be hypothetical, depending on the objectives of the assessment. They may be similar to, or even congruent with, one or more of the Reference Animals and Plants (RAPs). Where this is not the case, attempts can be made to consider the extent to which the Representative Organisms differ from the nearest RAP in terms of known radiation effects upon it, basic biology, radiation dosimetry, and pathways of exposure. This paper discusses the practical implications of such an approach.
Actions of radiation protection in the collection of discarded radioactive material
International Nuclear Information System (INIS)
Neri, E.P.M.; Silva, F.C.A. da
2017-01-01
Brazil has approximately 2000 radiative facilities that use radiation sources in their processes and are controlled by The Brazilian Nuclear Energy Commission - CNEN through standards, authorizations and inspections. These radioactive materials, whether in the form of waste or radioactive source, used in medical, industrial, research, etc. are sometimes discarded and found in inappropriate places, such as garbage dumps, industrial waste, streets, squares, etc. found by urban cleaning professionals without the proper knowledge of them. The work presents the radiation protection actions required for the safe collection of radioactive material to be performed by these professionals. According to the type of radioactive material the main actions of radiation protection are, among others: recognition of a radioactive material; correct use of personal protective equipment to contain possible radiation contamination; implementation of an area control etc. In order for the actions of recognition and collection of discarded radioactive material to be effective, there is a need to implement a training program in radiation protection for urban cleaning professionals
5th Conference on Aerospace Materials, Processes, and Environmental Technology
Cook, M. B. (Editor); Stanley, D. Cross (Editor)
2003-01-01
Records are presented from the 5th Conference on Aerospace Materials, Processes, and Environmental Technology. Topics included pollution prevention, inspection methods, advanced materials, aerospace materials and technical standards,materials testing and evaluation, advanced manufacturing,development in metallic processes, synthesis of nanomaterials, composite cryotank processing, environmentally friendly cleaning, and poster sessions.
International Nuclear Information System (INIS)
Paschoa, A.S.
1998-01-01
The immense volume of naturally occurring radioactive materials (NORM) wastes produced annually by extracting industries throughout the world deserves to come to the attention of international and national environmental protection agencies and regulatory bodies. Although a great deal of work has been done in the fields of radiation protection and remedial actions concerning uranium and other mines, the need to dispose of diffuse NORM wastes will have environmental and regulatory implications that thus far are not fully appreciated. NORM wastes constitute, by and large, unwanted byproducts of industrial activities as diverse as thorium and uranium milling, niobium, tin and gold mining extraction, water treatment, and the production of oil, gas, phosphate fertilizer, coal fire and aluminium. The volumes of NORM wastes produced annually could reach levels so high that the existing low level radioactive waste (LLRW) facilities would be readily occupied by NORM if controlled disposal procedures were not adopted. On the other hand, NORM cannot just be ignored as being below radiological concern (BRC) or lower than exempt concentration levels (ECLs), because sometimes NORM concentrations reach levels as high as 1 x 10 3 kBq/kg for 226 Ra, and not much less for 228 Ra. Unfortunately, thus far, there is not enough information available concerning NORM wastes in key industries, though the international scientific community has been concerned, for a long time now, with technologically enhanced natural radiation exposures (TENRE). This article is written with the intention of examining, to the extent possible, the potential environmental and regulatory implications of NORM wastes being produced in selected industries. (Author)
Pfeffer, Max J.; Schelhas, John W.; Meola, Catherine
2006-01-01
Environmental globalization has led to the implementation of conservation efforts like the creation of protected areas that often promote the interests of core countries in poorer regions. The creation of protected areas in poor areas frequently creates tensions between human needs like food and shelter and environmental conservation. Support for…
Valenti, Mayla Willik; de Oliveira, Haydée Torres; Logarezzi, Amadeu José Montagnini
2017-01-01
This study addresses the limitations and potential for the development of an adult environmental education program in two protected areas in Brazil. The investigation was based on critical communicative methodology and involved 25 people variously related to puma conservation and environmental education. We found that the staff of protected areas…
Environmental protection and international law: the case of nuclear energy
International Nuclear Information System (INIS)
Dagicour, F.
2002-03-01
Given the very hazardous nature of its activity, the nuclear industry has often been considered to be without a future. Concerns over climate change and increasing international energy needs have, however, shone a new light on the positive aspects of nuclear energy. As the only clean, stable and inexpensive energy source, available, nuclear energy promises a constant supply of electricity while protecting the atmosphere. This new relationship between the environment and nuclear energy calls for an analysis of the international regulation of the risks posed by nuclear energy production. Since the beginning of the nuclear age, the long term, unknown, and large geographic scope of the risks and effects of this activity have led to the adoption of a set of normative rules outside of the scope of international environmental law. The norms that now regulate this new, ultra-hazardous activity resulted in a set of rules aimed at protecting the environment in the face of high risk activities that now form the heart of international environmental law. Unwilling relinquish national sovereignty, States adopted a system of non-binding regulation to protect the environment and promote the nuclear industry. The Chernobyl accident later pointed to the weakness of this approach. Despite this weakness, the adoption of a soft law approach has led to progress in environmental protection in an area where States have been loathe to give up their sovereignty. (author)
New developments in protective materials
International Nuclear Information System (INIS)
Mirick, W.
1987-01-01
Linemen who must work in close proximity to high voltage circuits utilize various types of protective equipment to minimize risks of injury due to electrical shock or other hazards. Tools are available which sometimes allow the linemen to work at a relatively safe distance from potential sources of danger. However, these tools may not be appropriate in all instances and, in fact, work often may be better conducted by hand using insulated clothing and accessories. Electrical insulating gloves and sleeves are presently worn by linemen for protection from electrical shock. In addition, insulating line hose, covers, and blankets are employed to cover high voltage sources when linemen are working in those areas. Leather gloves--protectors-- are worn over the rubber electrical insulating gloves to prevent cuts, punctures, or other physical injuries to the rubber glove. Deficiencies were perceived, however, with respect to protective equipment now available. Specific problems being experienced with insulating protective equipment were reported to be related to material characteristics such as flexibility, weight, ozone/corona resistance, hydraulic fluid resistance and stiffness, particularly at cold temperatures. Discussions between the Electric Power Research Institute (EPRI) and Battelle's Columbus Division (BCD) resulted a program to investigate the need for and the development of improved electrical insulating equipment for linemen. This article describes the program
Development of Environmental Education Programs for Protected Areas in Madagascar
Ormsby, Alison
2007-01-01
Environmental education programs for schools in the peripheral zone of protected areas in Madagascar are still needed in numerous locations. My research investigated the status of environmental education and communication (EE&C) programs at Masoala National Park, Madagascar, as well as the attitudes of local residents toward the park and park…
IMPACT OF INVESTMENT IN QUALITY AND ENVIRONMENTAL PROTECTION ON REGIONAL SUSTAINABILITY
Directory of Open Access Journals (Sweden)
Ivan Savovic
2016-09-01
Full Text Available Considering that quality is one of foundation of harmonized regional development, in this paper, overall view of identified need for level of product quality, improvement of environmental protection, improvement of competitiveness and improvement of quality of tourism services has been analysed. In the next phase requests of stakeholders are presented. Author has also analysed feasibility of investing in quality improvement and environmental protection in Sumadija and Pomoravlje and identified the most significant types of economic benefits and economic costs that may result from the introduction of ISO 9001, ISO 14001, HACCP and obtaining the CE mark for products and diagrammatic unveiled in the assumed maximum, realistic and minimum value applying cost/benefit analysis. On these bases, mathematical functions and calculations are applied to determine if there are different variants of total economic benefits and total economic costs. Goal was to determine if the investment in quality improvement and environmental protection in SMEs in Sumadija and Pomoravlje is largely justified and profitable.
Recent publications on environmental law
International Nuclear Information System (INIS)
Lohse, S.
1988-01-01
The bibliography contains 1235 references to publications covering the following subject fields: general environmental law; environmental law in relation to constitutional law, administrative law, procedural law, revenue law, criminal law, private law, industrial law; law of regional development; nature conservation law; law on water protection; waste management law; law on protection against harmful effects on the environment; atomic energy law and radiation protection law; law of the power industry and the mining industry; laws and regulations on hazardous material and environmental hygiene. (HP) [de
Recent publications on environmental law
International Nuclear Information System (INIS)
Lohse, S.
1989-01-01
The bibliography contains 1160 references to publications covering the following subject fields: General environmental law; environmental law in relation to constitutional law, administrative law, procedural law, revenue law, criminal law, private law, industrial law; law of regional development; nature conservation law; law on water protection; waste management law; law on protection against harmful effects on the environment; atomic energy law and radiation protection law; law of the power industry and the mining industry; laws and regulations on hazardous material and environmental hygiene. (orig./HP) [de
Redesigning current instruments as a precondition for a more effective environmental protection
Directory of Open Access Journals (Sweden)
Adžemović Mesud R.
2017-01-01
Full Text Available The problems of environment and evaluation of natural capital belong to the phenomenology of externalities, and the requirements of environmental economics are ever more oriented towards the elaboration of the ecological–economic category of the externalization of internal expenses, wherefrom reasons for the introduction of ecological–economic instruments, before all payments for pollutions, ensue. Demystification of the negative conviction relating ecological payments as taxes is very important, since it must be shown that ecological payments correct, mitigate or remove externalities. Environmental protection is a complex system and it consists in a set of rules, measures and instruments that are applied for the surveillance of pollution sources, and shaping of instruments for environmental protection is a complex process intended for the accomplishment of established ecological goals. Among all instruments available for bridging the gap of internalization and exerting a significant effect on polluters to diminish their emissions of pollution, the ecological and economic ones are most important. The results of our investigation have demonstrated that it is necessary to reshape the current set of instruments regarding protection of vital functions of nature and an efficient environmental protection, and one of the key cognitions is that the scientific and professional public must not be excluded from the appraisals of creating and redesigning the instruments of environmental protection. These assertions have their foundation in the premise that the significance of elements of the social dimension in sustainable development is to a great extent determined by the level of environmental degradation and reduction in capacity of renewable sources. The paper, approach and data processing of the conducted research offer a new model and new elements of methodology for establishing the state and quality of the environment, whereby social
Application of crime countermeasures for the protection of nuclear materials
International Nuclear Information System (INIS)
Bean, C.H.
1975-01-01
Federal regulations prepared by the Nuclear Regulatory Commission and published in the Federal Register require licensees to take appropriate action to protect the health and safety of the public from unauthorized use of special nuclear material (SNM), which includes plutonium, uranium-233, and highly enriched uranium. Crime countermeasures for compliance with these regulations are an important part of the guidance that is provided by the NRC's Office of Standards Development. The use of crime countermeasures and protective devices is intended to prevent the unauthorized diversion of material and to aid in the detection of diversion should it be attempted. Plant and equipment designs should incorporate both electronic and physical security measures for protection of SNM. This applies to facilities and equipment for reprocessing, fabrication, and transportation of SNM. The protection systems include physical barriers, access controls, intrusion detection devices, surveillance devices, central alarm stations, communications, and response capability. Acceptable security measures and devices applicable to protected areas, material access areas, vital areas, vital equipment, and transportation vehicles have been presented in Regulatory Guides. (U.S.)
Dealing with the regional challenge of physical protection of nuclear materials
International Nuclear Information System (INIS)
Paschoa, A.S.
2002-01-01
Full text: The problem of protecting sensitive fissile and fissionable nuclear materials of misuses by governments has been the subject of the convention on physical protection of nuclear material (CPPNM), which entered into force on February 8, 1987. However, in May 2001 the final report of the expert meeting had already recognized 'a clear need to strengthen the international physical protection regime'. The board of governors of the International Atomic Energy Agency (IAEA) decided then to convene a group, which would meet in Vienna from 3 to 7 December 2001, to draft on amendment to the CPPNM. The tragic occurrences of September 11, 2001, however, changed the then generally accepted view on the problem of physical protection, because nuclear materials had to be protected from falling into the hands of terrorists rather than of governments thirst of nuclear sensitive materials. Moreover, crude explosive devices could be made by terrorists, or hired scientists, using readily available radioactive materials, like 226 Ra or 137 Cs to inflict damage to civilians. Thus physical protection of those and other radioactive materials became an instant challenge for national and international authorities to prevent the use of such materials in terrorist actions. The prevention of illicit trafficking of radioactive materials is now in the priority list of these authorities. Fortunately; an international conference on 'Measures to Detect, Intercept and Respond to the Illicit Uses of Nuclear Materials and Radioactive Sources' was held in Stockholm, Sweden, in May 2001. An IAEA document - GOV/2001/37-GC(45)/20 - recommended in its plan of activities a series of projects to be implemented between 2002 and 2005, which included developing and providing assistance for the application of: (i) standards for physical protection of nuclear materials and nuclear facilities in member states; (ii) norms and guidelines for nuclear material accounting and control in member states; (iii
Max J. Pfeffer; John W. Schelhas; Catherine Meola
2006-01-01
Environmental globalization has led to the implementation of conservation efforts like the creation of protected areas that often promote the interests of core countries in poorer regions. The creation of protected areas in poor areas frequently creates tensions between human needs like - food and shelter and environmental conservation. Support for such conservation...
Protecting Privacy and Confidentiality in Environmental Health Research.
Resnik, David B
2010-01-01
Environmental health researchers often need to make difficult decisions on how to protect privacy and confidentiality when they conduct research in the home or workplace. These dilemmas are different from those normally encountered in clinical research. Although protecting privacy and confidentiality is one of the most important principles of research involving human subjects, it can be overridden to prevent imminent harm to individuals or if required by law. Investigators should carefully consider the facts and circumstances and use good judgment when deciding whether to breach privacy or confidentiality.
Environmental risk analysis of hazardous material rail transportation
Energy Technology Data Exchange (ETDEWEB)
Saat, Mohd Rapik, E-mail: mohdsaat@illinois.edu [Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 1243 Newmark Civil Engineering Laboratory, 205 North Mathews Avenue, Urbana, IL 61801 (United States); Werth, Charles J.; Schaeffer, David [Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 1243 Newmark Civil Engineering Laboratory, 205 North Mathews Avenue, Urbana, IL 61801 (United States); Yoon, Hongkyu [Sandia National Laboratories, Albuquerque, NM 87123 (United States); Barkan, Christopher P.L. [Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 1243 Newmark Civil Engineering Laboratory, 205 North Mathews Avenue, Urbana, IL 61801 (United States)
2014-01-15
Highlights: • Comprehensive, nationwide risk assessment of hazardous material rail transportation. • Application of a novel environmental (i.e. soil and groundwater) consequence model. • Cleanup cost and total shipment distance are the most significant risk factors. • Annual risk varies from $20,000 to $560,000 for different products. • Provides information on the risk cost associated with specific product shipments. -- Abstract: An important aspect of railroad environmental risk management involves tank car transportation of hazardous materials. This paper describes a quantitative, environmental risk analysis of rail transportation of a group of light, non-aqueous-phase liquid (LNAPL) chemicals commonly transported by rail in North America. The Hazardous Materials Transportation Environmental Consequence Model (HMTECM) was used in conjunction with a geographic information system (GIS) analysis of environmental characteristics to develop probabilistic estimates of exposure to different spill scenarios along the North American rail network. The risk analysis incorporated the estimated clean-up cost developed using the HMTECM, route-specific probability distributions of soil type and depth to groundwater, annual traffic volume, railcar accident rate, and tank car safety features, to estimate the nationwide annual risk of transporting each product. The annual risk per car-mile (car-km) and per ton-mile (ton-km) was also calculated to enable comparison between chemicals and to provide information on the risk cost associated with shipments of these products. The analysis and the methodology provide a quantitative approach that will enable more effective management of the environmental risk of transporting hazardous materials.
Environmental risk analysis of hazardous material rail transportation
International Nuclear Information System (INIS)
Saat, Mohd Rapik; Werth, Charles J.; Schaeffer, David; Yoon, Hongkyu; Barkan, Christopher P.L.
2014-01-01
Highlights: • Comprehensive, nationwide risk assessment of hazardous material rail transportation. • Application of a novel environmental (i.e. soil and groundwater) consequence model. • Cleanup cost and total shipment distance are the most significant risk factors. • Annual risk varies from $20,000 to $560,000 for different products. • Provides information on the risk cost associated with specific product shipments. -- Abstract: An important aspect of railroad environmental risk management involves tank car transportation of hazardous materials. This paper describes a quantitative, environmental risk analysis of rail transportation of a group of light, non-aqueous-phase liquid (LNAPL) chemicals commonly transported by rail in North America. The Hazardous Materials Transportation Environmental Consequence Model (HMTECM) was used in conjunction with a geographic information system (GIS) analysis of environmental characteristics to develop probabilistic estimates of exposure to different spill scenarios along the North American rail network. The risk analysis incorporated the estimated clean-up cost developed using the HMTECM, route-specific probability distributions of soil type and depth to groundwater, annual traffic volume, railcar accident rate, and tank car safety features, to estimate the nationwide annual risk of transporting each product. The annual risk per car-mile (car-km) and per ton-mile (ton-km) was also calculated to enable comparison between chemicals and to provide information on the risk cost associated with shipments of these products. The analysis and the methodology provide a quantitative approach that will enable more effective management of the environmental risk of transporting hazardous materials
Tagawa, Masahito; Kimoto, Yugo; Protection of Materials and Structures From the Space Environment
2013-01-01
The goals of the 10th International Space Conference on “Protection of Materials and Structures from Space Environment” ICPMSE-10J, since its inception in 1992, have been to facilitate exchanges between members of the various engineering and science disciplines involved in the development of space materials, including aspects of LEO, GEO and Deep Space environments, ground-based qualification, and in-flight experiments and lessons learned from operational vehicles that are closely interrelated to disciplines of the atmospheric sciences, solar-terrestrial interactions and space life sciences. The knowledge of environmental conditions on and around the Moon, Mars, Venus and the low Earth orbit as well as other possible candidates for landing such as asteroids have become an important issue, and protecting both hardware and human life from the effects of space environments has taken on a new meaning in light of the increased interest in space travel and colonization of other planets. And while many materia...
Environmental surveillance at Los Alamos during 1991. Environmental protection group
Energy Technology Data Exchange (ETDEWEB)
Dewart, J.; Kohen, K.L. [comps.
1993-08-01
This report describes the environmental surveillance program conducted by Los Alamos National Laboratory during 1991. Routine monitoring for radiation and for radioactive and chemical materials is conducted on the Laboratory site as well as in the surrounding region. Monitoring results are used to determine compliance with appropriate standards and to permit early identification of potentially undesirable trends. Results and interpretation of data for 1991 cover external penetrating radiation; quantities of airborne emissions and effluents; concentrations of chemicals and radionuclides in ambient air, surface waters and groundwaters, municipal water supply, soils and sediments, and foodstuffs; and environmental compliance. Comparisons with appropriate standards, regulations, and background levels provide the basis for concluding that environmental effects from Laboratory operations are small and do not pose a threat to the public, Laboratory employees, or the environment.
Energy Technology Data Exchange (ETDEWEB)
Perez Fonseca, A.
2010-07-01
From the beginning of its industrial activity twenty five years ago, the Juzbado Factory of Enusa Group has always upheld a strong commitment with Radiological Protection and environmental respect and protection. Consequently, the evolution of dose shows a downward trend over the years. Although production has been increased gradually, the average doses to workers have stayed below 1 mSv. In order to identify and prevent the potential environmental impacts of its industrial activity and minimize its impact on the surroundings, the facility develops and environmental management system according to UNE-EN-ISO 14001 since 1999. (Author)
Directory of Open Access Journals (Sweden)
Savelyev, U.V., Markovska, L.A., Robota, L.P., Parkhomenko, N.I., and Savelyeva, O.O.
2014-05-01
Full Text Available New polyurethane compositions (PC as multifunctional protective materials that can serve as coatings or binders or impregnating materials have been created. PC have high adhesion values and the PC-based materials are waterproof and resistant to aggressive biotic (abiotic and technogenic factors (biocorrosion, UV radiation, chemical agents. Putting active compounds into the polymer macrochain prolongs the protection functions of the materials. This is their advantage to existing materials.
Materials corrosion and protection at high temperatures
International Nuclear Information System (INIS)
Balbaud, F.; Desgranges, Clara; Martinelli, Laure; Rouillard, Fabien; Duhamel, Cecile; Marchetti, Loic; Perrin, Stephane; Molins, Regine; Chevalier, S.; Heintz, O.; David, N.; Fiorani, J.M.; Vilasi, M.; Wouters, Y.; Galerie, A.; Mangelinck, D.; Viguier, B.; Monceau, D.; Soustelle, M.; Pijolat, M.; Favergeon, J.; Brancherie, D.; Moulin, G.; Dawi, K.; Wolski, K.; Barnier, V.; Rebillat, F.; Lavigne, O.; Brossard, J.M.; Ropital, F.; Mougin, J.
2011-01-01
This book was made from the lectures given in 2010 at the thematic school on 'materials corrosion and protection at high temperatures'. It gathers the contributions from scientists and engineers coming from various communities and presents a state-of-the-art of the scientific and technological developments concerning the behaviour of materials at high temperature, in aggressive environments and in various domains (aerospace, nuclear, energy valorization, and chemical industries). It supplies pedagogical tools to grasp high temperature corrosion thanks to the understanding of oxidation mechanisms. It proposes some protection solutions for materials and structures. Content: 1 - corrosion costs; macro-economical and metallurgical approach; 2 - basic concepts of thermo-chemistry; 3 - introduction to the Calphad (calculation of phase diagrams) method; 4 - use of the thermodynamic tool: application to pack-cementation; 5 - elements of crystallography and of real solids description; 6 - diffusion in solids; 7 - notions of mechanics inside crystals; 8 - high temperature corrosion: phenomena, models, simulations; 9 - pseudo-stationary regime in heterogeneous kinetics; 10 - nucleation, growth and kinetic models; 11 - test experiments in heterogeneous kinetics; 12 - mechanical aspects of metal/oxide systems; 13 - coupling phenomena in high temperature oxidation; 14 - other corrosion types; 15 - methods of oxidized surfaces analysis at micro- and nano-scales; 16 - use of SIMS in the study of high temperature corrosion of metals and alloys; 17 - oxidation of ceramics and of ceramic matrix composite materials; 18 - protective coatings against corrosion and oxidation; 19 - high temperature corrosion in the 4. generation of nuclear reactor systems; 20 - heat exchangers corrosion in municipal waste energy valorization facilities; 21 - high temperature corrosion in oil refining and petrochemistry; 22 - high temperature corrosion in new energies industry. (J.S.)
Protective material for solar cell; Taiyo denchiyo hyomen hogozai
Energy Technology Data Exchange (ETDEWEB)
Iimura, M.; Domoto, T. [Nitto Denko Corp., Osaka (Japan)
1998-02-03
The protective material for the solar cell of this invention consists of fluororesin containing from 1 to 20wt% titanium oxide particles with the particle size range from 1 to 1,000nm. Surface contamination of the protective material for the solar cell and deterioration of the adhesive are prevented when titanium oxide with particular particle size is contained in the fluororesin in a particular range as mentioned above. Titanium oxide has photocatalytic performance to decompose organic substances, and the surface protective material for the solar cell containing titanium oxide can decompose and remove dirt such as dust adhering the surface for preventing surface contamination. In addition, total light permeability can be maintained at high rate and the permeability of less than 350nm ultraviolet rays causing deterioration of the adhesive can be decreased if the particle size and content of titanium oxide are specified. Titanium dioxide of anatase type crystal structure is ideal as the titanium oxide. 1 tab.
Determination of carbon-14 in environmental level, solid reference materials
Energy Technology Data Exchange (ETDEWEB)
Blowers, Paul, E-mail: paul.blowers@cefas.co.uk [Cefas Lowestoft Laboratory, Pakefield Road, Lowestoft, Suffolk, NR33 0HT (United Kingdom); Caborn, Jane, E-mail: jane.a.caborn@nnl.co.uk [NNL, Springfields, Salwick, Preston, Lancashire, PR4 0XJ (United Kingdom); Dell, Tony [Veterinary Laboratories Agency, New Haw, Addlestone, Surrey, KT15 3NB (United Kingdom); Gingell, Terry [DSTL, Radiation Protection Services, Crescent Road, Alverstoke, Gosport, Hants, PO12 2DL (United Kingdom); Harms, Arvic [National Physical Laboratory, Hampton Road, Teddington, Middlesex, TW11 0LW (United Kingdom); Long, Stephanie [Radiological Protection Institute of Ireland, 3 Clonskeagh Square, Clonskeagh Road, Dublin 14, Ireland (United Kingdom); Sleep, Darren [Centre for Ecology and Hydrology, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster, LA1 4AP (United Kingdom); Stewart, Charlie [UKAEA (Waste Management Group), Chemical Support Services, D1310/14, Dounreay, Thurso, Caithness, KW14 7TZ (United Kingdom); Walker, Jill [Radiocarbon Dating, The Old Stables, East Lockinge, Wantage, Oxon OX12 8QY (United Kingdom); Warwick, Phil E. [GAU-Radioanalytical, National Oceanography Centre Southampton, European Way, Southampton, SO14 3ZH (United Kingdom)
2011-10-15
An intercomparison exercise to determine the {sup 14}C activity concentrations in a range of solid, environmental level materials was conducted between laboratories in the UK. IAEA reference materials, C2, C6 and C7, and an in-house laboratory QA material were dispatched in 2006 to ten laboratories comprising of members of the Analyst Informal Working Group (AIWG) and one other invited party. The laboratories performed the determinations using a number of techniques, and using the results each one was evaluated in terms of levels of precision, sensitivity and limits of detection. The results of the study show that all techniques are capable of successfully analysing {sup 14}C in environmental level materials, however, a shortage of certified environmental reference materials exists. The suitability of the IAEA reference materials and other material for use as reference materials was also assessed.
Determination of carbon-14 in environmental level, solid reference materials
International Nuclear Information System (INIS)
Blowers, Paul; Caborn, Jane; Dell, Tony; Gingell, Terry; Harms, Arvic; Long, Stephanie; Sleep, Darren; Stewart, Charlie; Walker, Jill; Warwick, Phil E.
2011-01-01
An intercomparison exercise to determine the 14 C activity concentrations in a range of solid, environmental level materials was conducted between laboratories in the UK. IAEA reference materials, C2, C6 and C7, and an in-house laboratory QA material were dispatched in 2006 to ten laboratories comprising of members of the Analyst Informal Working Group (AIWG) and one other invited party. The laboratories performed the determinations using a number of techniques, and using the results each one was evaluated in terms of levels of precision, sensitivity and limits of detection. The results of the study show that all techniques are capable of successfully analysing 14 C in environmental level materials, however, a shortage of certified environmental reference materials exists. The suitability of the IAEA reference materials and other material for use as reference materials was also assessed.
Ecology - environmental protection - survival grisis. 3. rev. ed.
International Nuclear Information System (INIS)
Schwitte, J.
1983-01-01
The concept developed aims to contribute towards the solution of the crisis of human survival by promoting - ecologic knowledge - environmental awareness - environment-protecting behaviour. In substance it comprises five points of emphasis: 1. long-term aspects of the environmental crisis - an introduction into the ecology of civilization, 2. 'Space-ship earth' - terrestrial atmosphere - air pollution, 3. Water - waste water - hydrobiology, 4. Sewage treatment plants - waste water treatment technology, 5. Nuclear power and nuclear fuel cycle - the Harrisburg accident, USA, March 28, 1979 -. A comprehensive bibliography is appended. (orig./HSCH) [de
INVESTMENT FOR ENVIRONMENTAL PROTECTION IN THE EUROPEAN UNION
Directory of Open Access Journals (Sweden)
POPEANGĂ VASILE
2014-08-01
Full Text Available Investment decision can be regarded as one of the most important decisions taken by the management company. By the correct foundation of investment decisions depend the market position of the company, increasing its market share and gain a competitive advantage over competitors. Investments for environmental protection brings together all available money-makers, private and mixed distribute to finance activities and actions aimed at the prevention, reduction and elimination of pollution and other forms of environmental degradation resulting from production processes or consumption of goods and services.
Application of radiation chemistry in materials modification and environmental protection
International Nuclear Information System (INIS)
Chmielewski, A.G.
2007-01-01
Radiation chemistry is a part of the physical chemistry similarly like photo-chemistry, plasma-chemistry, ultrasonic-chemistry etc. Ionizing radiation produces abundant secondary electrons. Following these primary events, the ions, secondary electrons and excited molecules undergo further transformations, exchanging charges and energy and reacting with surrounding molecules, thereby producing free radicals and other reactive species which finally evolve into new stable products. Three main sources of radiation are applied for radiation processing. These are electron accelerators, gamma sources and X-ray unit based on e-/X conversion process. Radiation processing was used early on for polymer modification. The intermediates formed during material irradiation can follow several reaction paths that result in disproportion, hydrogen abstraction, arrangements and/or the formation of new bonds. Nowadays, the modification of polymers covers radiation cross-linking, radiation-induced polymerization (graft polymerization and curing) and the degradation of polymers. Some polymers predominantly undergo crosslinking other degradation. However new techniques allow crosslinking of polymers which were considered to be degradable only, like PTFE and cellulose derivatives. Regarding natural polymers the biggest application concerns rubber pre-crosslinking in tire industry. The processing of natural polymers is also being developed to elaborate new biodegradable materials. The radiation crosslinked wires and cables show excellent heat resistance (long-term thermal stability and short-term thermal stability) as well as abrasion resistance. Other big application is crosslinking of XLPE type pipes which are widely used for hot water and floor heating [30]. Polybutelene terephthalate (PBT), which is a plastic for electronic industry, can be crosslinked by radiation and lead free soldering materials can be applied in such a case. This method of crosslinking is also applied to manufacture
Plasma processing of fibre materials for enhanced impact protection
Creyghton, Y.L.M.; Simor, M.
2009-01-01
The performance of lightweight impact protective clothing depends on the constituting materials, their assembly in a system and interaction under various dynamic impact conditions. In this paper an overview of options for improved impact protective clothing systems based on a new plasma technology
International Nuclear Information System (INIS)
Pillette-Cousin, L.
2001-01-01
kept under lock and key, and keys should be accessible to authorized personnel only. Alarm and gardiennage are not mandatory, but in some special cases, an alarm system has been required by the authority. It should be noted that these requirements are very often the same than those set by national authorities dealing with sealed radioactive sources. In the case of operators using gamma radiography devices, several regulations regarding licensing of sealed radioactive sources users, radiation protection of public and workers, and environmental protection, require physical protection measures in order to prevent theft of radioactive sources and to ensure their protection against fire or other damages. Usually, the arrangements made by the operator for the protection of devices containing both a radioactive source and nuclear material comply with the requirements related to physical protection of depleted uranium. This is not the case for empty devices whose radioactive source has been removed and for the accessories such as directional and panoramic collimators, transfer casks, trimmers, which contain DU and are not submitted to other regulations. Declarants are rended sensitive to that point in order they ensure the same level of physical protection to all devices containing DU, both used, useless or damaged. As an example, gammagraphy operators should not store and leave without surveillance these type of accessories inside vehicles, as the risk of theft is significant. In the medical field, trimmers may have been removed from the radiotherapy unit, and very often, shaping block made of DU, delivered with the unit, are not used by the medical personnel, because of their radioactivity. These items, containing a few kilograms of DU, have to be inventoried by the operators, labelled and kept under lock and key. When possible, operators are invited to return unused and damaged equipment to the manufacturer. In order to implement the declaration regime requirements, IPSN
Environmental protection belongs to the public: A vision for citizen science at EPA
Parker, A.; Dosemagen, S.
2017-12-01
As a collaborative and open approach to science, citizen science has the potential make science more actionable, applicable, and usable, especially when designed with scientists, communities and decision-makers as partners. In response to recent interest in citizen science from the US Environmental Protection Agency, the National Advisory Council for Environmental Policy and Technology provided EPA with advice and recommendations on how to integrate citizen science into the core work of EPA. The Council's 28 members—representatives of academia; business and industry; nongovernmental organizations; and state, local and tribal governments—identifies citizen science as an invaluable opportunity for EPA to strengthen public support for EPA's mission and the best approach for the Agency to connect with the public on environmental protection. The report recommends that EPA embrace citizen science as a core tenet of environmental protection, invest in citizen science for communities, partners, and the Agency, enable the use of citizen science data at the Agency, integrate citizen science into the full range of work of EPA. This presentation will outline principles and strategy for integrating citizen science into science and policy at the national level, increasing the usability of citizen science data for decision-making and policy, and leveraging citizen science for environmental protection.
Utilization of colemanite as a radiation protection material
International Nuclear Information System (INIS)
Bayulken, Ahmet; Aksut, Cem
1986-01-01
In experiments utilizing neutrons, a good shielding is very important. For developing countries, economics of the protection system is also a very important factor. In this work, a new material for protection blocks is investigated. These blocks are fabricated with colemanite powder in a paraffin wax matrix, and their behaviour as a neutron shield are investigated with a Pu-Be neutron source. (author)
1987 Oak Ridge model conference: Proceedings: Volume 2, Environmental protection
Energy Technology Data Exchange (ETDEWEB)
1987-01-01
See the abstract for Volume I for general information on the conference. Topics discussed in Volume II include data management techiques for environmental protection efforts, the use of models in environmental auditing, in emergency plans, chemical accident emergency response, risk assessment, monitoring of waste sites, air and water monitoring of waste sites, and in training programs. (TEM)
1987 Oak Ridge model conference: Proceedings: Volume 2, Environmental protection
International Nuclear Information System (INIS)
1987-01-01
See the abstract for Volume I for general information on the conference. Topics discussed in Volume II include data management techiques for environmental protection efforts, the use of models in environmental auditing, in emergency plans, chemical accident emergency response, risk assessment, monitoring of waste sites, air and water monitoring of waste sites, and in training programs
Measurement of HTO permeability of materials for protective appliances
International Nuclear Information System (INIS)
Yamamoto, H.; Tomooka, M.; Kato, S.; Murata, M.; Kinouchi, N.; Yamamoto, H.
1992-01-01
Tritiated water (HTO) vapor permeabilities were measured for plastic and rubber films used for protective appliances (suits, gloves, wrappings, etc.). The measurement data prove that polyehylene and butyl rubbers are materials suitable for HTO protective appliances with their lower permeability. The data also indicate that desiccating protective appliances before reuse is effective for restoring their original resistances to penetrating HTO vapor when they are repeatedly used. (author)
U.S. Environmental Protection Agency, Region 6 National Priorities List (NPL) Sites - 05/12/2014
U.S. Environmental Protection Agency — Point locations for sites in U.S. Environmental Protection Agency, Region 6 which are documented as being part of the National Priorities List as of May 12, 2014....
Modernization of the WWER 440/230 nuclear power plant environmental protection system
Energy Technology Data Exchange (ETDEWEB)
Mikheev, N.V.; Kamenskaya, A.N.; Kulyukhin, S.A.; Novichenko, V.L.; Rumer, I.A. [Russian Academy of Sciences, Institute of Physical Chemistry, Moscow (Russian Federation); Antonov, B.V.; Kornienko, A.G.; Meshkov, V.M.; Rogov, M.F. [Rosenergoatom Concern, Moscow (Russian Federation)
2001-07-01
The papers reports a new approach to the problem of increasing environmental protection during severe accidents at WWER 440/230 nuclear power plants. The environmental protection system that we propose has three, not two protection levels, and can be introduced with minor modernization of the equipment available at WWER 440/230 nuclear power plants: 1. a jet-vortex condenser; 2. the sprinkler system; 3. a sorption module. The proposed modernization not only makes it possible to avoid emergency discharge of radioactive air and steam mix into the environment under any accident scenario, but also would substantially contribute to the safety of WWER 440/230 nuclear power plants. (author)
Little, Keith W; Koralegedara, Nadeesha H; Northeim, Coleen M; Al-Abed, Souhail R
2017-07-01
Non-hazardous solid materials from industrial processes, once regarded as waste and disposed in landfills, offer numerous environmental and economic advantages when put to beneficial uses (BUs). Proper management of these industrial non-hazardous secondary materials (INSM) requires estimates of their probable environmental impacts among disposal as well as BU options. The U.S. Environmental Protection Agency (EPA) has recently approved new analytical methods (EPA Methods 1313-1316) to assess leachability of constituents of potential concern in these materials. These new methods are more realistic for many disposal and BU options than historical methods, such as the toxicity characteristic leaching protocol. Experimental data from these new methods are used to parameterize a chemical fate and transport (F&T) model to simulate long-term environmental releases from flue gas desulfurization gypsum (FGDG) when disposed of in an industrial landfill or beneficially used as an agricultural soil amendment. The F&T model is also coupled with optimization algorithms, the Beneficial Use Decision Support System (BUDSS), under development by EPA to enhance INSM management. Published by Elsevier Ltd.
The mission of the U. S. Environmental Protection Agency (EPA) is to safeguard public health and the environment from adverse effects that may be caused by exposure to pollutants in the air, water, soil and food. Protecting human health and the environment carries with it the ch...
Guidelines for defining and documenting data on costs of possible environmental protection measures
Energy Technology Data Exchange (ETDEWEB)
Marlowe, I.; King, K.; Boyd, R.; Bouscaren, R.; Pacyna, J. [AEA Technology Environment, Harwell (United Kingdom)
1999-07-01
The Guidelines are intended to promote good practice in the documenting and use of data on the costs of possible environmental protection measures in the context of international data comparisons. The minimum information needed to describe the cost of an environmental protection measures is: details of pollution source; details of the environmental protection measure and its performance characteristics; how costs are defined; the year to which data apply; indications of data uncertainty; how pollutants are defined; and reference to data sources. Guidelines are given for these seven items. These are followed by descriptions of various methods of data processing - dealing with information; calculating annual costs; discount/interest rates; and additional issues relating to the implementation of cost data. 16 refs., 5 tabs., 6 apps.
Low Earth Orbit Environmental Effects on Space Tether Materials
Finckernor, Miria M.; Gitlemeier, Keith A.; Hawk, Clark W.; Watts, Ed
2005-01-01
Atomic oxygen (AO) and ultraviolet (UV) radiation erode and embrittle most polymeric materials. This research was designed to test several different materials and coatings under consideration for their application to space tethers, for resistance to these effects. The samples were vacuum dehydrated, weighed and then exposed to various levels of AO or UV radiation at the NASA Marshall Space Flight Center. They were then re-weighed to determine mass loss due to atomic oxygen erosion, inspected for damage and tensile tested to determine strength loss. The experiments determined that the Photosil coating process, while affording some protection, damaged the tether materials worse than the AO exposure. TOR-LM also failed to fully protect the materials, especially from UV radiation. The POSS and nickel coatings did provide some protection to the tethers, which survived the entire test regime. M5 was tested, uncoated, and survived AO exposure, though its brittleness prevented any tensile testing.
Environmental Protection Tools in Agricultural Management Works
Glowacka, Agnieszka; Taszakowski, Jaroslaw; Janus, Jaroslaw; Bozek, Piotr
2016-10-01
Land consolidation is a fundamental instrument for agricultural management. It facilitates comprehensive changes in the agricultural, social, and ecological domains. Consolidation and post-consolidation development-related investments are an opportunity to improve living conditions in rural areas, and simultaneously ensure its positive impact on the environment. One of the primary goals of consolidation, directly specified in the Act on land consolidation, is to improve farming conditions. In Poland, consolidation is possible due to EU funds: RDP 2007-2013 and RDP 2014-2020. In order for individual villages to be granted EU funds for consolidation and post-consolidation development under the Rural Development Programme 2014-2020, their consolidation has to implement actions with positive impact on the environment and the landscape. The goal of this paper is to analyse documentation in the form of assumptions for a land consolidation project enclosed to an RDP 2014-2020 grant application and project information sheets as the basis for environmental impact assessment in the context of detailed presentation of environmental protection solutions that ensure a positive impact of the project on the environment and landscape. The detailed study involved 9 villages in the Malopolskie Voivodeship, which applied for EU grants for land consolidation in the current financial perspective. The paper specifies the existing state of the analysed villages as regards the natural environment, lists agricultural management instruments that have a positive impact on the environment, and demonstrates that planning of actions aimed at environmental protection is a necessary element of assumptions for land consolidation projects.
Characteristics of meat packaging materials and their environmental suitability assessment
Directory of Open Access Journals (Sweden)
Šuput Danijela Z.
2013-01-01
Full Text Available After functional phase, packaging becomes waste that is recycled or disposed of in landfills. Recently, numerus packages have been developed for assessing the packaging risk on the environment. We applied Gabi 4 Education software on polymer product packaging for meat products. The objective of first part of the paper was characterization of materials used for meat and meat products packaging in terms of mechanical and barrier properties. Results show that tested materials are able to keep protective atmosphere and contribute to the quality and sustainability of the product. Air permeability was 3.60 and 26.60 ml/m224h, and water vapor was 6.90 and 9.50 ml/m224h, respectively, for foils 1 and 2, as a result of different film composition. In second part, based on real data, Gabi 4 Education software is applied. The obtained results showed that organic compounds emissions have the highest impact on human health and the most damaging environmental impact observed was the emission of CO2.
Investigating the Use of a Protective Coating Material as an ...
African Journals Online (AJOL)
Petroleum wax is known to provide ozone protection to natural rubber under static deformation while a combination of chemical antiozonant and wax is normally used for ozone protection under dynamic conditions. The work described in this paper, aims at investigating the effectiveness of a coating material in protecting a ...
Environmental protection directory. 3. rev. and enl. ed.
International Nuclear Information System (INIS)
Schumacher, H.G.
1993-01-01
For the first time in this form in Germany, this handbook provides a comprehensive collection of mainly non-commercial environmental protection addresses. It covers the federal, community, scientific and jounalistic areas as well as business and society associations and groups, educational and advisory services and institutions. The addressbook contains the addresses and telephone numbers of the seperate institutions, as well as the names and extension numbers of public officials, representatives and media relations personned of the associations, the party environmental spokesperson and assigned people from the churches, and the ecology editors in media, radio and television. (orig.) [de
Ultrasound in environmental protection - Recent developments
Energy Technology Data Exchange (ETDEWEB)
Mason, T.J. [Coventry University, Coventry (United Kingdom). School of Science and the Environment
2002-07-01
There can be little doubt that there is an increasing interest in the development of new methods for environmental protection and remediation. Driven by the interests of scientists and engineers but increasingly by legislation a very wide range of new technologies is being examined. Amongst these power ultrasound is proving to be a front-runner and offers a wide range of applications. Not all of these are likely to become industrial realities nevertheless there are a few which have a real chance of adoption. Some of the stronger contenders are reviewed below. (orig.)
Review and challenges of policies of environmental protection and sustainable development in China.
Zhang, Kun-Min; Wen, Zong-Guo
2008-09-01
China is confronted with the dual task of developing its national economy and protecting its ecological environment. Since the 1980s, China's policies on environmental protection and sustainable development have experienced five changes: (1) progression from the adoption of environmental protection as a basic state policy to the adoption of sustainable development strategy; (2) changing focus from pollution control to ecological conservation equally; (3) shifting from end-of-pipe treatment to source control; (4) moving from point source treatment to regional environmental governance; and (5) a turn away from administrative management-based approaches and towards a legal means and economic instruments-based approach. Since 1992, China has set down sustainable development as a basic national strategy. However, environmental pollution and ecological degradation in China have continued to be serious problems and have inflicted great damage on the economy and quality of life. The beginning of the 21st century is a critical juncture for China's efforts towards sustaining rapid economic development, intensifying environmental protection efforts, and curbing ecological degradation. As the largest developing country, China's policies on environmental protection and sustainable development will be of primary importance not only for China, but also the world. Realizing a completely well-off society by the year 2020 is seen as a crucial task by the Chinese government and an important goal for China's economic development in the new century, however, attaining it would require a four-fold increase over China's year 2000 GDP. Therefore, speeding up economic development is a major mission during the next two decades and doing so will bring great challenges in controlling depletion of natural resources and environmental pollution. By taking a critical look at the development of Chinese environmental policy, we try to determine how best to coordinate the relationship between the
Sustainable Materials Management Challenge Data
U.S. Environmental Protection Agency — Sustainable Materials Management (SMM) is a systemic approach to using and reusing materials more productively over their entire lifecycles. It represents a change...
Occupational radiation protection in the mining and processing of raw materials
International Nuclear Information System (INIS)
2004-01-01
The mining and processing of uranium ore, thorium ore and other raw materials containing natural radionuclides are carried out in a number of Member States. There is a clear need to update the guidance on the radiation protection of the workers involved, and this Safety Guide provides such updated guidance. Material from two previous publications has been adapted for inclusion in this Safety Guide. These previous publications - Radiation Monitoring in the Mining and Milling of Radioactive Ores (Safety Series No. 95) and Radiation Protection of Workers in the Mining and Milling of Radioactive Ores (Safety Series No. 26, hereby superseded) - dealt principally with activities involving uranium ore and thorium ore. Activity concentrations of naturally occurring radionuclides are elevated in other mineral deposits such as heavy mineral sands and phosphate rock. Furthermore, high radon levels may be found in mines, irrespective of the activity concentrations of natural radionuclides in the raw material being extracted. In recognition of these circumstances, this Safety Guide is intended to apply also to the mining and processing of any raw material for which radiation protection measures need to be considered. The IAEA Safety Fundamentals publication on Radiation Protection and the Safety of Radiation Sources presents the principles, concepts and objectives of protection and safety. Safety requirements based on the objectives and principles specified in these Safety Fundamentals, including requirements for the protection of workers exposed to ionizing radiation, are established in the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (the Basic Safety Standards or Bss). These requirements also reflect the recommendations of the International Commission on Radiological Protection (ICRP). Safety Guides provide recommendations on the basis of international experience on the fulfilment of the requirements
International Nuclear Information System (INIS)
Quina, Margarida J.; Bordado, Joao C.M.; Quinta-Ferreira, Rosa M.
2011-01-01
Highlights: → The Dutch Building Material Decree (BMD) was used to APC residues from MSWI. → BMD is a straightforward tool to calculate expectable loads to the environment of common pollutants. → Chloride load to the environment lead to classification of building material not allowed. → At least a pre-treatment (e.g. washing) is required in order to remove soluble salts. → The stabilization with phosphates or silicates eliminate the problem of heavy metals. - Abstract: Waste management and environmental protection are mandatory requirements of modern society. In our study, air pollution control (APC) residues from municipal solid waste incinerators (MSWI) were considered as a mixture of fly ash and fine particulate solids collected in scrubbers and fabric filters. These are hazardous wastes and require treatment before landfill. Although there are a number of treatment options, it is highly recommended to find practical applications rather than just dump them in landfill sites. In general, for using a construction material, beyond technical specifications also soil and surface water criteria may be used to ensure environmental protection. The Dutch Building Materials Decree (BMD) is a valuable tool in this respect and it was used to investigate which properties do not meet the threshold criteria so that APC residues can be further used as secondary building material. To this end, some scenarios were evaluated by considering release of inorganic species from unmoulded and moulded applications. The main conclusion is that the high amount of soluble salts makes the APC residues a building material prohibited in any of the conditions tested. In case of moulding materials, the limits of heavy metals are complied, and their use in Category 1 would be allowed. However, also in this case, the soluble salts lead to the classification of 'building material not allowed'. The treatments with phosphates or silicates are able to solve the problem of heavy metals, but
The innovative application studty on eco-packaging design and materials
Cui Yong Min; Ren Xin Guang
2016-01-01
The paper solves the increasingly deteriorate environmental problems by positively exploring how to utilize and develop eco-packaging design reasonably. The paper explores an effective method that combines eco-packaging and environmental protection materials, hoping to define the sustainable development road of packaging design. The paper is centered on the design application of eco-packaging and environmental protection materials, applies and analyzes the method to obtain innovative design r...
The physical protection of nuclear material and nuclear facilities
Energy Technology Data Exchange (ETDEWEB)
NONE
1999-06-01
The latest review (1993) of this document was of limited scope and resulted in changes to the text of INFCIRC/225/Rev.2 designed to make the categorization table in that document consistent with the categorization table contained in the Convention on Physical Protection of Nuclear Materials. Consequently, a comprehensive review of INFCIRC/225 has not been conducted since 1989. Consequently, a meeting of national experts was convened from 2-5 June 1998 and from 27-29 October 1998 for a thorough review of INFCIRC/225/Rev.3. The revised document reflects the recommendations of the national experts to improve the structure and clarity of the document and to take account of improved technology and current international and national practices. In particular, a chapter has been added which provides specific recommendations related to sabotage of nuclear facilities and nuclear material. As a result of this addition, the title has been changed to 'The Physical Protection of Nuclear Material and Nuclear Facilities'. The recommendations presented in this IAEA document reflect a broad consensus among Member States on the requirements which should be met by systems for the physical protection of nuclear materials and facilities. It is hoped that they will provide helpful guidance for Member States.
The physical protection of nuclear material and nuclear facilities
International Nuclear Information System (INIS)
1999-06-01
The latest review (1993) of this document was of limited scope and resulted in changes to the text of INFCIRC/225/Rev.2 designed to make the categorization table in that document consistent with the categorization table contained in the Convention on Physical Protection of Nuclear Materials. Consequently, a comprehensive review of INFCIRC/225 has not been conducted since 1989. Consequently, a meeting of national experts was convened from 2-5 June 1998 and from 27-29 October 1998 for a thorough review of INFCIRC/225/Rev.3. The revised document reflects the recommendations of the national experts to improve the structure and clarity of the document and to take account of improved technology and current international and national practices. In particular, a chapter has been added which provides specific recommendations related to sabotage of nuclear facilities and nuclear material. As a result of this addition, the title has been changed to 'The Physical Protection of Nuclear Material and Nuclear Facilities'. The recommendations presented in this IAEA document reflect a broad consensus among Member States on the requirements which should be met by systems for the physical protection of nuclear materials and facilities. It is hoped that they will provide helpful guidance for Member States
GCD TechPort Data Sheets Thermal Protection System Materials (TPSM) Project
Chinnapongse, Ronald L.
2014-01-01
The Thermal Protection System Materials (TPSM) Project consists of three distinct project elements: the 3-Dimensional Multifunctional Ablative Thermal Protection System (3D MAT) project element; the Conformal Ablative Thermal Protection System (CA-TPS) project element; and the Heatshield for Extreme Entry Environment Technology (HEEET) project element. 3D MAT seeks to design, develop and deliver a game changing material solution based on 3-dimensional weaving and resin infusion approach for manufacturing a material that can function as a robust structure as well as a thermal protection system. CA-TPS seeks to develop and deliver a conformal ablative material designed to be efficient and capable of withstanding peak heat flux up to 500 W/ sq cm, peak pressure up to 0.4 atm, and shear up to 500 Pa. HEEET is developing a new ablative TPS that takes advantage of state-of-the-art 3D weaving technologies and traditional manufacturing processes to infuse woven preforms with a resin, machine them to shape, and assemble them as a tiled solution on the entry vehicle substructure or heatshield.
Energy Technology Data Exchange (ETDEWEB)
Legler, Harald; Schasse, Ulrich [Niedersaechsisches Institut fuer Wirtschaftsforschung e.V., Hannover (Germany)
2009-06-15
There exists a connection between the economic structural orientation and international competitiveness on the one hand as well as the environmental political requirements on the other hand. The environmental protection economy fits quite well the profile that Germany is demanded in the international change. Under this aspect, the authors of the contribution under consideration report on the production structure and on the international competition position of the German environmental protection economy. The authors report on (a) the production structure and production dynamics of the environmental protection industry; (b) German environmental protection economy in the international comparison; (c) Goods, building works and services for environmental protection in Germany.
Developments in environmental and engineering law in 1990
International Nuclear Information System (INIS)
Brandner, T.
1991-01-01
The detailed and clear compilation for the period 1.1.1990-31.1.1991 covers the following topics: Environmental and engineering law in the German unification process; superordinate developments in the EG and in Germany, in particular: Draft Federal Environmental Code, Civil Environmental Liability Act, EIA, German Federal Environmental Foundation; technological safety; climate protection - international agreements, EC law, developments in Germany; air and noise pollution control law; atomic and radiation protection law - point of departure, legislation, individual questions: Federal supervision, nuclear disposal and recycling. Moreover: Environmental concerns in regional planning; the law of nature conservation, water protection, waste management, hazardous materials, genetic engineering and soil protection. (HSCH) [de
Environmental protection in Eastern Europe
International Nuclear Information System (INIS)
Kabala, S.
1990-01-01
There is a need for the development of institutional structures to make the transfer of technology work to improve the ability of Eastern Europe to find solutions to its environmental problems. Envisioned is technical assistance: U.S. experts who will work on-site with Eastern European experts. The idea is to technically train individuals in pollution-prevention methods. Trained experts could then upgrade processes to save input, energy, and materials. In the exchange of environmental information, discussions have led to four issues: it is expensive to transfer equipment and make qualified personnel available for a long period; information is comparatively inexpensive to convey; in Eastern Europe there are trained and competent personnel; the theoretical knowledge, academic knowledge, and education are at a very high level but little of this knowledge has been put into practice. The technology transfer goal is to develop a response to needs identified by partner institutions and counterpart professionals that will enable Eastern Europe to tap resources that do exist- scientific, managerial, and economic resources and tap information resources in the US in order to address the environmental problems that exist in Eastern Europe
The influence of protective properties of packaging materials and ...
African Journals Online (AJOL)
The influence of protective properties of packaging materials and modified atmosphere on quality changes of dried apricot is shown in this paper. In our investigation, we used four different characteristic combinations of packaging materials with different barrier properties for packaging of dried apricot: ...
Critical considerations on the environmental protection. On the technical regulatory guide of air
Energy Technology Data Exchange (ETDEWEB)
Rasch, R
1978-11-01
The author critically examines the problem of environmental protection maintaining living conditions even with further development of technology. He deals in detail with the success-promising slogans put forth plastics and hydrochloric acid, nuclear energy, as well as keeping the air clean, sulfur dioxide as main topic from the viewpoint of environmental protection. Furthermore, the technical regulatory guides in maintaining clean air and flue gas purification are treated.
Thermal Conductivity of Ceramic Thermal Barrier and Environmental Barrier Coating Materials
Zhu, Dong-Ming; Bansal, Narottam P.; Lee, Kang N.; Miller, Robert A.
2001-01-01
Thermal barrier and environmental barrier coatings (TBC's and EBC's) have been developed to protect metallic and Si-based ceramic components in gas turbine engines from high temperature attack. Zirconia-yttria based oxides and (Ba,Sr)Al2Si2O8(BSAS)/mullite based silicates have been used as the coating materials. In this study, thermal conductivity values of zirconia-yttria- and BSAS/mullite-based coating materials were determined at high temperatures using a steady-state laser heat flux technique. During the laser conductivity test, the specimen surface was heated by delivering uniformly distributed heat flux from a high power laser. One-dimensional steady-state heating was achieved by using thin disk specimen configuration (25.4 mm diam and 2 to 4 mm thickness) and the appropriate backside air-cooling. The temperature gradient across the specimen thickness was carefully measured by two surface and backside pyrometers. The thermal conductivity values were thus determined as a function of temperature based on the 1-D heat transfer equation. The radiation heat loss and laser absorption corrections of the materials were considered in the conductivity measurements. The effects of specimen porosity and sintering on measured conductivity values were also evaluated.
Directory of Open Access Journals (Sweden)
Xiaogang Li
2007-12-01
Full Text Available This article discusses the key features of a newly developed national data-sharing online network for material environmental corrosion. Written in Java language and based on Oracle database technology, the central database in the network is supported with two unique series of corrosion failure data, both of which were accumulated during a long period of time. The first category of data, provided by national environment corrosion test sites, is corrosion failure data for different materials in typical environments (atmosphere, seawater and soil. The other category is corrosion data in production environments, provided by a variety of firms. This network system enables standardized management of environmental corrosion data, an effective data sharing process, and research and development support for new products and after-sale services. Moreover this network system provides a firm base and data-service platform for the evaluation of project bids, safety, and service life. This article also discusses issues including data quality management and evaluation in the material corrosion data sharing process, access authority of different users, compensation for providers of shared historical data, and finally, the related policy and law legal processes, which are required to protect the intellectual property rights of the database.
Protecting nuclear material and facilities: Is a new approach needed?
International Nuclear Information System (INIS)
Steinhausler, F.; Bunn, G.
2002-01-01
Full text: The main reason why national physical protection (PP) systems for nuclear and other radioactive material need to be strengthened further is that, after the attacks on the US on 11 September 2001, the threat of dangerous, suicidal radiological and nuclear terrorism can no longer be excluded as a possibility. Existing PP systems were not designed to deal with the threat of suicidal terrorists having the numbers, skills, training, and resources available to the commandos attacking on 11 September. Moreover, there are no mandatory international standards for domestic PP systems for nuclear or radioactive material, and this has produced great variation in protection provided from country to country. IAEA recommended standards, while useful, were not designed with the new terrorist threat in mind. Moreover, they are often not followed in practice. The result is inadequate protection against the new form of terrorism in most countries. The Director General of the IAEA expressed a similar view after 11 September, but achieving a consensus to amend the Convention on the Physical Protection of Nuclear Material (CPPNM) to require specific standards of protection for different amounts and kinds of nuclear material used or stored domestically (not in international transport) has been impossible in the year since 11 September. In the case of radiological materials, a new effort to provide required international standards for protection against the new form of terrorism has not begun. In the summer of 2001, leaders of the G-8 countries agreed to a Global Partnership to prevent the new terrorists from acquiring nuclear and radiological as well as other materials related to weapons of mass destruction. Perhaps in part because of the failure to date to achieve agreement on an effective amendment to the CPPNM, the first principle of this partnership is to strengthen 'multilateral treaties and other instruments whose aim is to prevent the proliferation or illicit
Critical materialism: science, technology, and environmental sustainability.
York, Richard; Clark, Brett
2010-01-01
There are widely divergent views on how science and technology are connected to environmental problems. A view commonly held among natural scientists and policy makers is that environmental problems are primarily technical problems that can be solved via the development and implementation of technological innovations. This technologically optimistic view tends to ignore power relationships in society and the political-economic order that drives environmental degradation. An opposed view, common among postmodernist and poststructuralist scholars, is that the emergence of the scientific worldview is one of the fundamental causes of human oppression. This postmodernist view rejects scientific epistemology and often is associated with an anti-realist stance, which ultimately serves to deny the reality of environmental problems, thus (unintentionally) abetting right-wing efforts to scuttle environmental protection. We argue that both the technologically optimistic and the postmodernist views are misguided, and both undermine our ability to address environmental crises. We advocate the adoption of a critical materialist stance, which recognizes the importance of natural science for helping us to understand the world while also recognizing the social embeddedness of the scientific establishment and the need to challenge the manipulation of science by the elite.
International Nuclear Information System (INIS)
Bunn, G.; Rinne, R.
2001-01-01
Full text: Unlike the Non-Proliferation Treaty requirement that non-nuclear-weapon parties provide 'safeguards' information to the IAEA on their nuclear materials and their state systems for accounting and control, there is no related requirement to provide information on state systems of physical protection. A review of 1997 IAEA and Stanford physical protection conference proceedings showed both the absence of information on important practices from many states and the great variation in practices from state to state. Besides the lack of internationally required standards for domestic protection, reasons for the variations described in Stanford-Sandia National Laboratories research include: differences in states' perceptions of the threats to their materials; differences in their abilities to pay the cost of stronger physical protection; differences in their laws and regulatory practices in general; and differences in their cultural attitudes - for example, attitudes toward whether to arm personnel guarding weapon-usable material or to require clearances for personnel with access to such material. The information presented to the 1997 IAEA and Stanford conferences was supplied voluntarily. The two global documents which provide norms for physical protection do not require submission of such information. These are the 1980 Convention on Physical Protection of Nuclear Material and the 1999 IAEA INFCIRC/225/Rev.4. This means that, without bilateral cooperation, no state can find out how other states are protecting their nuclear material. Yet, as IAEA Director General El Baradei has said, '[I]t is not a matter of indifference to other States whether and to what extent [physical protection] responsibility is fulfilled. ...The need for international cooperation becomes evident in situations - where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter and defeat hostile actions against nuclear
Energy Technology Data Exchange (ETDEWEB)
Knoblauch, K; Richter, E
1986-06-01
Activated carbons, active cokes and carbon molecular sieves are used for regenerative processes for environmental protection and for processing of valuable feedstocks. Development of adsorption processes and their layout based on adsorption equilibria, adsorption kinetics, kinetics of desorption by heating, depressurization or purging not only as single steps but in the same combination as in the regenerative process. For example some adsorption processes are decsribed which are applied in pilot scale or industrially. These include: nitrogen production from air by pressure swing adsorption (PSA); hydrogen production from coke oven gas by PSA; upgrading of methane from biogas and from fire damp; removal of hydrogen sulfide from biogas; removal of sulfur dioxide and nitrogen oxides from flue gases and drinking water supply and waste water treatment. (71 refs.)
Directory of Open Access Journals (Sweden)
Merlin A.
2018-01-01
Full Text Available The aesthetic durability of wooden structures is a major challenge for the use of this material in construction. Wood is used for its technical performances but also for its architectural qualities and its aesthetic perception. The premature aging of the wooden structures is detrimental because these disorders, even if they do not affect the strength of the structures, are mostly irremediable. The surface protection of wood is generally ensured by the use of a finish, whose essential role is to protect wood from climatic aggressions (water, solar radiation, oxygen, .... The secondary wood processing industry consists of a series of manufacturing and processing activities, each containing a portion of the added value of the product. The application of a finish on a wood-based work is usually the last and most visible step in this value chain.In outdoor use, the protection of the wood surface with transparent finishes is not yet sufficiently durable to be able to compete with materials used in industrial carpentry such as PVC or aluminum. Opaque finishes generally provide more durable protection but they mask the appearance of the wood sought by users.With the aim of positioning wood in this construction sector, research on transparent finishes has focused on the efficiency and improvement of the durability of the protection of the surface appearance of structures. Faced with climatic aggressions, the optimum conservation of a structure is not only linked to the performance of the finish but also to the characteristics of the wood material. In particular, in order to fulfill its protective function, the finish film must be able to follow the dimensional variations of the wood it covers without breaking and without detachment. In addition to the criteria for the effectiveness of finishes in the protection of structures, the environmental impact must be considered with increasing attention. Currently, more than 80% of composite or solid wood
Protecting workers and the environment: An environmental NGO's perspective on nanotechnology
International Nuclear Information System (INIS)
Balbus, John M.; Florini, Karen; Denison, Richard A.; Walsh, Scott A.
2007-01-01
Nanotechnology, the design and manipulation of materials at the atomic scale, may well revolutionize many of the ways our society manufactures products, produces energy, and treats diseases. New materials based on nanotechnology are already reaching the market in a wide variety of consumer products. Some of the observed properties of nanomaterials call into question the adequacy of current methods for determining hazard and exposure and for controlling resulting risks. Given the limitations of existing regulatory tools and policies, we believe two distinct kinds of initiatives are needed: first, a major increase in the federal investment in nanomaterial risk research; second, rapid development and implementation of voluntary standards of care pending development of adequate regulatory safeguards in the longer term. Several voluntary programs are currently at various stages of evolution, though the eventual outputs of each of these are still far from clear. Ultimately, effective regulatory safeguards are necessary to provide a level playing field for industry while adequately protecting human health and the environment. This paper reviews the existing toxicological literature on nanomaterials, outlines and analyzes the current regulatory framework, and provides our recommendations, as an environmental non-profit organization, for safe nanotechnology development
Economic instruments in environmental protection in Denmark
International Nuclear Information System (INIS)
1999-12-01
This report provides a comprehensive and up-to-date status on the current use of economic instruments in Danish environmental protection. The report focuses on the implementation and enforcement aspects of the Danish experience. Thereby, the report is intended to provide a contribution to the international efforts to collate and disseminate such experience, and to provide a means of experience sharing and example sharing. It is envisaged that the report may be of use also to countries in Central and Eastern Europe and in the Newly Independent States where the emerging market economies offer an opportunity for an enhanced use of economic instruments. Lastly, the report's emphasis on actual implementation and enforcement aspects renders it highly applicable also to undergraduate and postgraduate students in environmental and/or economic disciplines. (au)
Energy supply and environmental protection as conflicting targets
International Nuclear Information System (INIS)
Maier, G.
1976-01-01
The conflict between sufficient energy supply and efficient environmental protection is didactically analysed as a complex of topics for the political education. Education principles and sequencies basing on opinions of supporters and opponents of nuclear energy are shown. Aims of education are briefly shown with the examples of the energy supply of the FRG and the energy problems of Europe. (HP) [de
International Nuclear Information System (INIS)
Leinwather, T.
2000-03-01
This study deals with the views and motives of environmental ethics in the articles of Austrian nature and environmental protection associations. There are different ways of arguing: In an anthropocentric point of view nature is seen as a resource for man; human life needs protection an cultivation of nature. The non-anthropocentric point of view is more popular. Nature is not only seen as a resource for human needs and interests. It follows its own aims and purposes, seems to be a valuable being and has to be protected for itself. The study presents the two parent organizations 'Umweltdachverband - OeGNU' and 'Oeko-Buero' and their 45 members. The associations mainly argue from an anthropocentric point of view for the protection of nature and environment. Their motives are the care for human health and quality of life, the ensuring of resources, the leisure-time in nature and patriotism. The anthropocentric arguments perfectly fit into the other articles of these organizations: many of them are dealing with economical, scientifical, recreational and pedagogical affairs. And often they represent interests of agriculture, forestry ore trade. Non-anthropocentric statements are of minor importance and seem to be a way to present the seriousness of their demand for protection of nature and environment. (author)
Strengthening global practices for protecting nuclear material (NUMAT). Book of Abstracts
International Nuclear Information System (INIS)
Steinhaeusler, F.; Heissl, C.
2002-08-01
The International Conference on Physical Protection 'Strengthening Global Practices for Protecting Nuclear Material' was organized by the Institute of Physics and Biophysics, Salzburg University in cooperation with/supported by the European Commission, Lawrence Livermore National Laboratory, European Forum of the Stanford University's Institute for International Studies and Austria Institute for European Security. Its purpose was fostering exchange of information on the policy and technical aspects require to ensure the security of nuclear material around the world. There is a general concern that the international community needs to establish effective measures to counter theft, sabotage, and other illicit uses of nuclear fissile and other radioactive materials. The main subjects addressed by this conference were: a) global and local threat development and 'design basis'; b) standards for physical protection (PP), its adequacy and future needs; c) national practices in PP of nuclear materials (how to strengthen national security culture?); d) current R and D in security and detection technologies (identification of focus points for future R and D); e) programmes to aid in training, design, and implementation of physical protection systems (how to improve efficiency and assure sustainability of assistance programmes?). (nevyjel)
ENVIRONMENTAL PROTECTION SUSTAINABILITY STRATEGIC FACTOR IN THE ENERGY INDUSTRY
Directory of Open Access Journals (Sweden)
CÎRNU Doru
2015-06-01
Full Text Available We propose to conceive an environmental strategy intended to integrate harmoniously Gorj energy industry with principles of sustainable development. The sustainable development complies trinomial: ecological-economic-social. In our view, sustainable development, requires clean water and unpolluted air, land consolidated rejuvenated forests, biodiversity and protected nature reserves, churches and monasteries secular admired by visitors, welcoming places entered in the natural and cultural harmony. It is also necessary to reduce the pressure generated by socio-economic factors on the environment and the principles of sustainable development. The quality of life in urban and rural areas show extreme differences compared to European standards. For efficiency, we addressed the modeling method by designing a model valid for all thermoelectric power plants based on fossil fuels, allowing simultaneously, so adding value and environmental protection. The general objective that we propose for the environment, natural resources and patrimony, is related to the prevention of climate change by limiting the emission of toxic gases and their adverse effects on the environment The achievement of strategic objectives and implementation of proposals submitted, we consider that would have a double impact, on the one side, to protect the environment and the quality of life and, on the other side a positive influence on economic and social level.
Comparative environmental life cycle assessment of composite materials
International Nuclear Information System (INIS)
De Vegt, O.M.; Haije, W.G.
1997-12-01
The aim of the present study is to compare and quantify the environmental impact of three rotorblades made of different materials and to establish which stage in the life cycle contributes most. The life cycle of a product can be represented by the production phase, including depletion of raw materials (mining) and production (machining) of products, the utilisation phase, including use of energy, maintenance and cleaning, and the disposal phase, including landfill, incineration, recycling, etc. The environmental impact of a product is not only determined by the materials selected but also by the function of the product itself. E.g. when natural fibres are applied in vehicles as a substitution for metals the environmental impact in the use phase will be reduced due to a lower energy consumption caused by a lower car weight. The influence on the environmental impact of the production phase must also be taken into account. The material relation between the production phase and the use phase and the disposal phase is complicated. In general the lifetime of a product use phase can be extended (positive aspect), e.g. by application of a coating onto the surface. Due to the coating the product can not easily be recycled, which is a negative aspect. The three types of composites used in the rotorblade of the wind energy converter considered in this study are: flaxfibre reinforced epoxy, carbon fibre reinforced epoxy and glassfibre reinforced polyester. The assessment is performed using the computer program Simapro 3, which is based on the Dutch CML method for the environmental life-cycle assessment of products using the Eco-Indicator 95 evaluation method. The CML method defines five phases for an LCA: goal definition and scoping; inventory; classification; impact assessment; and improvement analysis. The improvement analysis is not part of this work. Performing an LCA is a time-consuming process due to the detailed information that is required. In chapter five some
Environmentally assisted cracking of LWR materials
International Nuclear Information System (INIS)
Chopra, O.K.; Chung, H.M.; Kassner, T.F.; Shack, W.J.
1995-12-01
Research on environmentally assisted cracking (EAC) of light water reactor materials has focused on (a) fatigue initiation in pressure vessel and piping steels, (b) crack growth in cast duplex and austenitic stainless steels (SSs), (c) irradiation-assisted stress corrosion cracking (IASCC) of austenitic SSs, and (d) EAC in high- nickel alloys. The effect of strain rate during different portions of the loading cycle on fatigue life of carbon and low-alloy steels in 289 degree C water was determined. Crack growth studies on wrought and cast SSs have been completed. The effect of dissolved-oxygen concentration in high-purity water on IASCC of irradiated Type 304 SS was investigated and trace elements in the steel that increase susceptibility to intergranular cracking were identified. Preliminary results were obtained on crack growth rates of high-nickel alloys in water that contains a wide range of dissolved oxygen and hydrogen concentrations at 289 and 320 degree C. The program on Environmentally Assisted Cracking of Light Water Reactor Materials is currently focused on four tasks: fatigue initiation in pressure vessel and piping steels, fatigue and environmentally assisted crack growth in cast duplex and austenitic SS, irradiation-assisted stress corrosion cracking of austenitic SSs, and environmentally assisted crack growth in high-nickel alloys. Measurements of corrosion-fatigue crack growth rates (CGRs) of wrought and cast stainless steels has been essentially completed. Recent progress in these areas is outlined in the following sections
International Nuclear Information System (INIS)
Breuer, R.
1978-01-01
The 52nd German Lawyers Meeting will be concerned in its legal department with the question of whether, from the points of view of the guaranteeing of the necessary environmental protection, additional regulations in the administrative procedures and administrative legal rights should be recommended. Here one is concerned, above all, with the problem of whether an administrative legal associations sueing or associations participation in administrative legal procedures is desirable in the interests of environmental protection. A negative answer must be given to this question. Discussion should concentrate on the problematical administrative legal interests, on the strengthening of administrative participation of popular opinion or interests in legal processes, on other improvements in administrative processes and on the legal control by Parliament of environmental protection. (orig.) [de
Supervision of waste management and environmental protection at the Swedish nuclear facilities 1999
International Nuclear Information System (INIS)
2000-03-01
The report summarizes the supervision of waste management and environmental protection at the nuclear facilities that was carried out by the Swedish Radiation Protection Institute in 1999. A summary of the inspections during 1999 and a description of important issues connected with the supervision of the nuclear facilities are given. The inspections during 1999 have focused on the management of liquid discharges and components containing induced activity at some of the nuclear facilities. Also, routines for filing environmental samples, discharge water samples and documents were inspected at all the different nuclear facilities. The Swedish Radiation Protection Institute finds that the operations are mainly performed according to current regulations
Directory of Open Access Journals (Sweden)
Tiphaine Leménager
2014-12-01
Full Text Available In a context of unprecedented environmental crisis, protected areas are expected to play a central role. Although considerable work has been done to understand the effectiveness of different types of protected area, there has been limited investigation of how a combination of different types of protected area within a system affects its overall environmental outcomes. Defining and using the concept of environmental complementarity, the paper explores whether or not the presence of private, state and community protected areas in a landscape has a positive effect on biodiversity conservation outcomes. Based on a Kenyan case study, it emphasizes the important and currently undervalued role of state protected areas and shows that other types of protected area can be analyzed as being a support. It suggests there is a complex array of complementarities between community, state and private protected areas. Differences in management capacity, staff skills, social acceptability, access to financial resources, tourism products, ecological resources, etc. between types of protected area were found to drive additionality and synergistic complementarities that undeniably contribute to strengthening the overall protected area system and increasing its resilience, as well as its capacity to generate environmental outcomes. Keywords: Biodiversity, Protected area, Environmental complementarity, Strategies
Novel material and structural design for large-scale marine protective devices
International Nuclear Information System (INIS)
Qiu, Ang; Lin, Wei; Ma, Yong; Zhao, Chengbi; Tang, Youhong
2015-01-01
Highlights: • Large-scale protective devices with different structural designs have been optimized. • Large-scale protective devices with novel material designs have been optimized. • Protective devices constructed of sandwich panels have the best anti-collision performance. • Protective devices with novel material design can reduce weight and construction cost. - Abstract: Large-scale protective devices must endure the impact of severe forces, large structural deformation, the increased stress and strain rate effects, and multiple coupling effects. In evaluation of the safety of conceptual design through simulation, several key parameters considered in this research are maximum impact force, energy dissipated by the impactor (e.g. a ship) and energy absorbed by the device and the impactor stroke. During impact, the main function of the ring beam structure is to resist and buffer the impact force between ship and bridge pile caps, which could guarantee that the magnitude of impact force meets the corresponding requirements. The means of improving anti-collision performance can be to increase the strength of the beam section or to exchange the steel material with novel fiber reinforced polymer laminates. The main function of the buoyancy tank is to absorb and transfer the ship’s kinetic energy through large plastic deformation, damage, or friction occurring within itself. The energy absorption effect can be improved by structure optimization or by the use of new sandwich panels. Structural and material optimization schemes are proposed on the basis of conceptual design in this research, and protective devices constructed of sandwich panels prove to have the best anti-collision performance
75 FR 22723 - Stream Protection Rule; Environmental Impact Statement
2010-04-30
..., 784, 816, and 817 RIN 1029-AC63 Stream Protection Rule; Environmental Impact Statement AGENCY: Office... streams from the adverse impacts of surface coal mining operations. We are requesting comments for the... mining activities may be conducted in or near perennial or intermittent streams. That rule, which this...
29 CFR 1926.1000 - Rollover protective structures (ROPS) for material handling equipment.
2010-07-01
... 29 Labor 8 2010-07-01 2010-07-01 false Rollover protective structures (ROPS) for material handling equipment. 1926.1000 Section 1926.1000 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY... CONSTRUCTION Rollover Protective Structures; Overhead Protection § 1926.1000 Rollover protective structures...
International Nuclear Information System (INIS)
Cautilli, F.; Polizzano, C.; Tassoni, E.; Zarlenga, F.
1989-02-01
In this report the methodological process, that should be followed when an environmental protection and restoration problem is dealt with, is described. Moreover the actions that 'the environmental engineer' has to carry out to study every multidisciplinary problem on territory protection and restoration are synthesized, keeping in mind that the territory knowledge and the geological hazard specification are the essential bases for research work. Finally, some typical territory protection actions against the hydrogeological failures, the quarry excavation activity and the hazardous waste disposal impact, are briefly described. (author)
International Nuclear Information System (INIS)
Steiner, M.; Hornung, L.; Mundigl, S.; Kirchner, G.
2006-01-01
International organisations, including ICRP, IAEA and UNSCEAR, and the international scientific community are currently engaged in work on the protection of non-human species against ionising radiation as a complement to the existing framework centred on humans. The basic ideas and conceptual approaches developed during the last decade substantially agree with each other. The EC funded FASSET project (Framework for Assessment of Environmental Impact) summarizes and reviews the current knowledge of radiation effects on biota, provides basic dosimetric models for fauna and flora and suggests an assessment framework. Protection of the environment against ionising radiation, on the one hand, aims to close a conceptual gap in radiation protection. Therefore, current frameworks for environmental protection conceptually follow radiation protection of man. On the other hand, preservation of natural resources, habitats and the biological diversity are common objectives of environmental protection against radioactive as well as chemical pollutants, suggesting an integrated approach based on the fundamental ideas of conventional environmental protection. In essence, a conceptual framework encompassing protection of man as well as of fauna and flora against chemical and radioactive pollutants would be highly desirable in view of coherence, consistency and transparency. Such an umbrella concept communicates the positive message that similar issues are treated in a conceptually similar manner, thus facilitating scientific justification and public communication and increasing acceptance. This paper discusses different concepts and approaches to radiation protection of man, radiation protection of non-human biota and environmental protection against chemical pollutants, identifies common principles and differences, addresses conflicting requirements and evaluates the feasibility and limitations of such an encompassing framework. (authors)
POTENTIAL APPLICATION OF NANOMETALS IN ENVIRONMENTAL PROTECTION
Directory of Open Access Journals (Sweden)
Dagmara Malina
2017-02-01
Full Text Available In recent years, great interest in metallic nanoparticles has been observed, both because of their unlimited application possibilities, and also because of the unusual biological, chemical and physical features. It is expected that developments in nanotechnology will become the main promoter of scientific and technological innovations in the coming decades. Searching for a new and safe alternative to chemical pesticides, high hopes are associated with nanotechnology development. Particularly useful may be preparations containing nanoscale metal particles with strong antimicrobial properties. Importantly, safe and non-toxic for the plant components of biological origin may be used in nanoparticles synthesis. This article is a description of the potential applications of nanomaterials in environmental protection, which may become the basis for developing of new protection plant products with antimicrobial properties relative to plant pathogens and non-toxic to higher organisms.
Application of Advanced Materials Protecting from Influence of Free Space Environment
Dotsenko, Oleg; Shovkoplyas, Yuriy
2016-07-01
High cost and low availability of the components certified for use in the space environment forces satellite designers to using industrial and even commercial items. Risks associated with insufficient knowledge about behavior of these components in radiation environment are parried, mainly, by careful radiating designing of a satellite where application of special protective materials with improved space radiation shielding characteristics is one of the most widely used practices. Another advantage of protective materials application appears when a satellite designer needs using equipment in more severe space environment conditions then it has been provided at the equipment development. In such cases only expensive repeated qualification of the equipment hardness can be alternative to protective materials application. But mostly this way is unacceptable for satellite developers, being within strong financial and temporal restrictions. To apply protective materials effectively, the developer should have possibility to answer the question: "Where inside a satellite shall I place these materials and what shall be their shape to meet the requirements on space radiation hardness with minimal mass and volume expenses?" At that, the minimum set of requirements on space radiation hardness include: ionizing dose, nonionizing dose, single events, and internal charging. The standard calculative models and experimental techniques, now in use for space radiation hardness assurance of a satellite are unsuitable for the problem solving in such formulation. The sector analysis methodology, widely used in satellite radiating designing, is applicable only for aluminium shielding and doesn't allow taking into account advantages of protective materials. The programs simulating transport of space radiations through a substance with the use of Monte-Carlo technique, such as GEANT4, FLUKA, HZETRN and others, are fully applicable in view of their capabilities; but time required for
Space Environmental Effects on Candidate Solar Sail Materials
Edwards, David L.; Nehls, Mary; Semmel, Charles; Hovater, Mary; Gray, Perry; Hubbs, Whitney; Wertz, George
2004-01-01
The National Aeronautics and Space Administration's (NASA) Marshall Space Flight Center (MSFC) continues research into the utilization of photonic materials for spacecraft propulsion. Spacecraft propulsion, using photonic materials, will be achieved using a solar sail. A solar sail operates on the principle that photons, originating from the sun, impart pressure to the sail and therefore provide a source for spacecraft propulsion. The pressure imparted ot a solar sail can be increased, up to a factor of two, if the sun-facing surface is perfectly reflective. Therefore, these solar sails are generally composed of a highly reflective metallic sun-facing layer, a thin polymeric substrate and occasionally a highly emissive back surface. Near term solar sail propelled science missions are targeting the Lagrange point 1 (L1) as well as locations sunward of L1 as destinations. These near term missions include the Solar Polar Imager and the L1 Diamond. The Environmental Effects Group at NASA's Marshall Space Flight Center (MSFC) continues to actively characterize solar sail material in preparation for these near term solar sail missions. Previous investigations indicated that space environmental effects on sail material thermo-optical properties were minimal and would not significantly affect the propulsion efficiency of the sail. These investigations also indicated that the sail material mechanical stability degrades with increasing radiation exposure. This paper will further quantify the effect of space environmental exposure on the mechanical properties of candidate sail materials. Candidate sail materials for these missions include Aluminum coated Mylar, Teonex, and CP1 (Colorless Polyimide). These materials were subjected to uniform radiation doses of electrons and protons in individual exposures sequences. Dose values ranged from 100 Mrads to over 5 Grads. The engineering performance property responses of thermo-optical and mechanical properties were characterized
Emergency respiratory protection with common materials
International Nuclear Information System (INIS)
Cooper, D.W.; Hinds, W.C.; Price, J.M.
1983-01-01
Certain unexpected accidents, such as fires, explosions, chemical spills, or nuclear reactor malfunctions, can lead to the exposure of workers and the public to toxic gases, vapors, and aerosols. The efficacy of readily available materials, such as cotton fabric, toweling, and a single-use respirator, for providing emergency respiratory protection was evaluated by determining the filtration efficiency as a function of particle size over the range of 0.4 to 5 μm diameter and performance against a reactive water soluble (I 2 ) and unreactive vapor (CH 3 I). At a reasonable design face velocity (1.5 cm/s), the respirator mask used at double thickness could reduce particle concentrations a factor of 30 or more throughout the particle range tested, and a wetted towel four layers thick could provide a factor of five. Dry fabrics were ineffective in removing iodine vapor, but wetted sheeting or toweling reduced concentration by a factor of ten or more under design conditions, 1.5 cm/s face velocity and 50 Pa pressure drop (0.2 inches of water). The fabrics provided a statistically insignificant reduction in methyliodide. In practice, any leaks around the seal to the face would lessen the protection offered by such materials. The effectiveness factor approach proved useful in comparing filter performance under different conditions
Energy Technology Data Exchange (ETDEWEB)
Karamanidis, G.
1985-01-01
The first chapter outlines the ecological situation of Greece, while the second chapter presents the legal foundations of environmental protection in Greece. Secondary laws are mentioned, as these are generally the laws in which penal liabilities are stated. The present environmental protection regulations are found to be unsatisfactory and unfit for preventing environmental damage. A new legislative structure is proposed on the basis of German environmental protection standards. (orig./HSCH).
Analytical procedures for the determination of strontium radionuclides in environmental materials
International Nuclear Information System (INIS)
Harvey, B.R.; Ibbett, R.D.; Lovett, M.B.; Williams, K.J.
1989-01-01
As part of its statutory role in the authorisation, monitoring and research relating to radioactive wastes discharged into the aquatic environment, the Aquatic Environment Protection Division of the Directorate of Fisheries Research (DFR), Lowestoft routinely carries out analyses for a substantial number of radionuclides in a wide range of environmental materials. The Ministry of a Agriculture, Fisheries and Food has for many years required information about the concentrations of strontium radionuclides in waters, sediments and biological materials. There are not absolute standard methods for such radiochemical analysis; indeed none are required because methodology is continually developing. A very considerable amount of expertise has been developed in the analysis of radiostrontium at the Laboratory since the late 1950s, when detailed analysis first commenced, and the procedures described in this report have been developed and tested over a long period of time with a view to achieving the highest analytical quality. Full details of the practical, analytical and computational procedures, as currently used, are given in the Appendix. (author)
International Nuclear Information System (INIS)
Reynolds, D.A.
1981-01-01
Concepts on integration of physical protection and material accounting systems to enhance overall safeguards capability are developed and presented. These concepts identify ways in which material accounting systems can be used to enable effective monitoring of authorized movement of nuclear material through physical protection boundaries. Concepts are also discussed for monitoring user access to nuclear material and for tagging user identification to material accounting transactions through physical protection functions. These result in benefits in detecting diversion and in positively tracing material movement. Finally, coordination of safeguards information from both subsystems in such an integrated system through a safeguards coordination center is addressed with emphasis on appropriate response in case of discrepancies
Nuclear technology in materials testing and radiation protection
International Nuclear Information System (INIS)
Neider, R.
1975-01-01
A report of the 1974 activities of the laboratories for physical and measuring technical fundamentals, radiation effects and radiation protection, application of radionuclides and testing of radioactive materials of the Bundesanstalt fuer Materialpruefung (BAM) is given. (RW/LH) [de
Environmental protection and the public within the framework of energy policy
International Nuclear Information System (INIS)
Schulz zur Wiesch, J.
1978-01-01
Environmental protection policy has - before the background of topical conflicts on the long-term securing of energy in spite of increasing consumption and limited resources - developed into a problem of the whole the Federal Republic of Germany which makes high demands on the disposing capacity of the corporations involved. Decisions on long-term energy and economic policy will have to be made without sufficient knowledge of all potential environmental crises and will have to be accounted for in the face of the population. The topics 'Energy - Environment - Public' were discussed from the different political and scientific angles within a seminar held by the Deutsches Institut fuer Urbanistik and the Bundesakademie fuer Oeffentliche Verwaltung. The topics were discussed with 28 specialists from institutions of the Bund, Laender, and communities. The proceedings include the lectures held and the contributions to a panel discussion about the future energy and environmental protection policy in Bund, Laender, and Communities as well as a summary of the final discussion. (orig.) [de
40 CFR 230.72 - Actions controlling the material after discharge.
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Actions controlling the material after discharge. 230.72 Section 230.72 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN... Actions To Minimize Adverse Effects § 230.72 Actions controlling the material after discharge. The effects...
Biological and environmental reference materials in CENAM.
Arvizu-Torres, R; Perez-Castorena, A; Salas-Tellez, J A; Mitani-Nakanishi, Y
2001-06-01
Since 1994, when the NIST/NOAA Quality Assurance Program in Chemical Measurements was discussed in Queretaro, CENAM, the National Measurement Institute (NMI) of Mexico, has become involved in the development of reference materials. In the field of biological and environmental reference materials, in particular, the NORAMET collaboration program with NIST and NRC, and the North-American Environmental Cooperation signed among three free-trade treaty organizations, have greatly helped the development of the materials metrology program in the newly established CENAM. This paper describes some particularly significant efforts of CENAM in the development of biological and environmental reference materials, on the basis of inter-comparison studies organized with local and governmental environmental agencies of Mexico. In the field of water pollution CENAM has developed a practical proficiency testing (PT) scheme for field laboratories, as a part of registration by local government in the metropolitan area, according to the Mexican Ecological Regulation. The results from these eight PTs in the last 5 years have demonstrated that this scheme has helped ensure the reliability of analytical capability of more than 50 field laboratories in three states, Mexico, D.F., and the States of Mexico and Queretaro. Similar experience has been obtained for more than 70 service units of stack emission measurements in the three states in 1998 and 1999, as a result of the design of a PT scheme for reference gas mixtures. This PT scheme has been accomplished successfully by 30 analytical laboratories who provide monitoring services and perform research on toxic substances (Hg, methylmercury, PCB, etc.) in Mexico. To support these activities, reference samples have been produced through the NIST SRMs, and efforts have been made to increase CENAM's capability in the preparation of primary reference materials in spectrometric solutions and gas mixtures. Collaboration among NMIs has also
Calle, Luz M.; Hintze, Paul E.; Parlier, Christopher R.; Sampson, Jeffrey W.; Coffman, Brekke E.; Coffman, Brekke E.; Curran, Jerome P.; Kolody, Mark R.; Whitten, Mary; Perisich, Steven;
2009-01-01
When space vehicles are launched, extreme heat, exhaust, and chemicals are produced and these form a very aggressive exposure environment at the launch complex. The facilities in the launch complex are exposed to this aggressive environment. The vehicle exhaust directly impacts the flame deflectors, making these systems very susceptible to high wear and potential failure. A project was formulated to develop or identify new materials or systems such that the wear and/or damage to the flame deflector system, as a result of the severe environmental exposure conditions during launches, can be mitigated. This report provides a survey of potential protective coatings for the refractory concrete lining on the steel base structure on the flame deflectors at Kennedy Space Center (KSC).
Environmental protection problems from the standpoint of regeneration of fast neutron reactor fuel
International Nuclear Information System (INIS)
Gedeonov, L.I.; Lazarev, L.N.; Suprunenko, A.N.
The discussion of the problem of environmental protection is based on two principles: a strict observance of legislatively established standards for permissible concentrations of radionuclides in objects of the environment and for dose loads for the population; all possible steps to reduce the contamination to a level justified in practice. Environmental protection steps are considered from the points of view of a systematic analysis. A survey of the environmental protection system near sources of radioactive discharges is given. The basic interactions and feedbacks are indicated. Characteristics differentiating the discharges of the fuel cycle of fast neutron breeder reactors from discharges of the slow neutron cycle are discussed. It is shown that it is necessary to study the overall regional and global interactions of discharges of the atomic power industry. The characteristics of situations at nuclear fuel cycle facilities of fast neutron reactors are discussed. The necessity of additional technical steps to prevent accidents and eliminate their effects if they take place is emphasized
International Nuclear Information System (INIS)
1992-02-01
The US Department of Energy (DOE) Order 5400.1 (DOE 1988a), General Environmental Protection Program, establishes environmental protection program requirements, authorities, and responsibilities to ensure that DOE operations are in compliance with applicable Federal, State and local environmental protection laws and regulations, executive orders, and internal department policies. Chapter 3 of DOE Order 5400.1 requires that each DOE Field Office prepare a plan for implementing the requirements of this order and update the plan annually. Therefore, this update to the US Department of Energy -- Richland Operations Office Environmental Protection Implementation Plan (DOE-RL 1989a), initially prepared November 9, 1989, is being issued
International Nuclear Information System (INIS)
1992-11-01
The US Department of Energy (DOE) Order 5400.1 (DOE 1988a), General Environmental Protection Program, establishes environmental protection program requirements, authorities, and responsibilities to ensure that DOE operations are in compliance with applicable Federal, State and local environmental protection laws and regulations, executive orders, and internal department policies. Chapter 3 of DOE Order 5400.1 requires that each DOE Field Office prepare a plan for implementing the requirements of this order and update the plan annually. This update to the US Department of Energy-Richland Operations Office Environmental Protection Implementation Plan (DOE-RL 1989a), initially prepared November 9, 1989, is being issued to comply with the order
Proceedings of the 4th Conference on Aerospace Materials, Processes, and Environmental Technology
Griffin, D. E. (Editor); Stanley, D. C. (Editor)
2001-01-01
The next millennium challenges us to produce innovative materials, processes, manufacturing, and environmental technologies that meet low-cost aerospace transportation needs while maintaining US leadership. The pursuit of advanced aerospace materials, manufacturing processes, and environmental technologies supports the development of safer, operational, next-generation, reusable, and expendable aeronautical and space vehicle systems. The Aerospace Materials, Processes, and Environmental Technology Conference (AMPET) provided a forum for manufacturing, environmental, materials, and processes engineers, scientists, and managers to describe, review, and critically assess advances in these key technology areas.
10 CFR 1.41 - Office of Federal and State Materials and Environmental Management Programs.
2010-01-01
... Environmental Management Programs. (a) The Office of Federal and State Materials and Environmental Management...) The Office of Federal and State Materials and Environmental Management Programs— (1) Plans and directs... 10 Energy 1 2010-01-01 2010-01-01 false Office of Federal and State Materials and Environmental...
International Nuclear Information System (INIS)
Litvinenko, V.G.; Savva, P.P.
1993-01-01
Consideration is given to the complex of measures taken in Priargunsky industrial mine-chemical association and directed to environment protection, complex utilization of raw materials during mining and processing of uranium ores. These measures include: 1) reduction of toxic chemical agent effluents into atmosphere due to introduction of new methods and gas cleaning systems; 2) rational use of water resources owing to application of circulating water supply systems, waste waters treatment and effective control of the state of water consumption by industrial enterprises; 3) utilization of gangue and industrial solid wastes
Discharges to the environment and environmental protection at CEGB power stations
International Nuclear Information System (INIS)
Wright, J.K.
1981-01-01
The subject is discussed under the headings: introduction (scope of paper will cover the principles, methods and results obtained in environmental protection in relation to atmospheric discharges made routinely during power generation); air pollution control; nuclear power stations (type of discharge, annual discharges, environmental monitoring); fossil fuelled power stations; health effects; trace elements; long range transport and acid rain; future coal fired plant; carbon dioxide. (U.K.)
Novel roles for genetically modified plants in environmental protection
Czech Academy of Sciences Publication Activity Database
Macek, Tomáš; Kotrba, Pavel; Svatoš, Aleš; Nováková, Martina; Demnerová, K.; Macková, Martina
2008-01-01
Roč. 26, č. 3 (2008), s. 146-152 ISSN 0167-7799 R&D Projects: GA AV ČR IAA4055204; GA MŠk 1M06030 Institutional research plan: CEZ:AV0Z40550506 Keywords : transgenic plant * environmental protection * insect pheromone * phytoremediation Subject RIV: EI - Biotechnology ; Bionics Impact factor: 6.624, year: 2008
Food and environmental protection newsletter. Vol. 9, No. 1
International Nuclear Information System (INIS)
2006-01-01
As indicated in the July 2005 issue of our newsletter, future 2006-2007 activities of the Food and Environmental Protection Section of the Joint Programme and the Agrochemicals Unit of the FAO/IAEA Agriculture and Biotechnology Laboratory in Seibersdorf will encompass a coordinated and comprehensive 'farm to fork' approach to food production systems, i.e. strengthening compliance with food and environmental safety standards through good agricultural practices. Laboratories and trained staff capable of establishing reliable sampling and analytical regimes for quantifying potential hazards within specific production practices or in individual food products are indispensable for informed decision-making and improved food safety and environmental protection. In this regard, we recently concluded a training workshop on an Introduction to QA/QC Measures in Pesticide Residue Analytical Laboratories at our Joint FAO/IAEA Agriculture and Biotechnology Laboratory in Seibersdorf from 12 September to 7 October 2005. The Workshop was attended by 23 participants from 22 developing countries and to date, both verbal and written feedback indicates that the workshop was very successful. We are planning to hold similar workshops on an annual basis in the future so that we might better respond to our Member State requests for laboratory training that further strengthens our efforts in enhancing good agricultural practices. Further details on the workshop are highlighted in the Feature Article Section of this newsletter
Environmental aspects of the use of materials for solar water heaters
International Nuclear Information System (INIS)
Van der Leun, C.J.; De Jager, D.
1994-10-01
The study on the title subject has been carried out in order to apply the results in new designs and to improve the production of solar water heating systems. Attention is paid to solar water heaters that are under development and solar water heaters that are commercially available in the Netherlands. Use has been made of a IVAM-developed product analysis method. For seven solar water heater concepts, that were on the market or under development in the Netherlands in 1992, the applied amounts of materials have been inventorized. Data on the environmental effects of the production of these materials are outlined and aggregated on the level of the components and the systems. Based on those data, environmental profiles are drafted, comprising 'effect scores' on 9 environmental criteria. However, the environmental 'effect scores' are not reliable enough to determine the most important factors in order to identify options to reduce the negative environmental effects. Data on the energy consumption of the production of relevant materials are available and reliable. The solar water heaters, considered in this report, do not show large differences for that matter. It appears that the amounts of air pollution, water pollution and waste flow from the production of materials for solar water heaters are no reasons to further reduce environmental effects of the production. It is recommended to focus on the reduction of material quantities and to increase the quantity of recycled material. Also it is recommended that manufacturers of solar boilers set up a take-back system. 43 tabs., 1 appendix, 56 refs
A procedure for a mechanical evaluation of an undefined osteo-protective material.
Marques, Marco; Terroso, Miguel; Freitas, Ricardo; Marques, AntÓnio Torres; Gabriel, Joaquim; Simoes, Ricardo
2015-02-01
Falls represent a major care and cost problem to health and social services world-widely, since 50% of falls result in an injury. In this work, is proposed a methodology to evaluate protective pads materials and geometry performance, in order to reduce impact results in a fall event. Since the material properties and the pad geometry are the key factors to make the protection possible when a fall event occurs, our approach relies on the use of mechanical tests to evaluate the properties of the material and in the study of the pad response during a fall. For this, were used compression, tensile and instrumented falling weight tests, that allow a fully characterization of the materials that can be employed in the protective pads. Likewise, to gather precise information on falls events, in order to study the pad response during a fall, a set of laboratory fall trials were created using a camera-less inertial motion capture (mocap) system. This allow the acquisition of dynamic information of falls, namely acceleration and velocity that can be used to create a finite element analysis (FEA) model, where different segments from the human body can be evaluated when the protective pad is associated to it. Through the proposed methodology, different materials and pad geometries can be studied towards maximizing the performance of protection pads for falls. The mocap system allows the acquisition of fall data, and also the creation of a human body geometrical model, representative of the fall. From the mechanical trials, was showed that the spacer fabric embedded with silicone has the higher ability to reduce the peak force in case of impact when compared with all the other specimens. The compression and the tensile tests allow the mechanical definition of the material, and with this the material definition on the FEA model. Copyright © 2014 Elsevier Ltd. All rights reserved.
International Nuclear Information System (INIS)
Paasch, R.A.
1991-09-01
The US Department of Energy (DOE) Order 5400.1 (DOE 1988a), General Environmental Protection Program, establishes environmental protection program requirements, authorities, and responsibilities to ensure that DOE operations are in compliance with applicable federal, state and local environmental protection laws and regulations, executive orders, and internal department policies. Chapter 3 of DOE Order 5400.1 requires that each field organization prepare a plan for implementing the requirements of this order and update this plan annually. Therefore, this update to the US Department of Energy -- Richland Operations Office Environmental Protection Implementation Plan for the Hanford Site, Richland, Washington, initially prepared November 9, 1989, is being issued. Responsibility for coordinating preparation of the annual update of this plan is assigned to the US Department of Energy Field Office, Richland, Safety and Environment Division's Environmental Oversight Branch
International Nuclear Information System (INIS)
Clark, Raymond L.; Czyscinski, Kenneth; Rosnick, Reid J.; Schultheisz, Daniel
2009-01-01
In 2001, as directed by the Energy Policy Act of 1992, the United States Environmental Protection Agency (EPA) issued public health and environmental radiation protection standards for the proposed repository at Yucca Mountain, Nevada. Several parties sued the Agency on numerous aspects of the rule. A Federal Court upheld EPA on all counts except for the compliance period associated with the individual-protection standard, which the Agency had limited to 10,000 years for a number of technical and policy reasons. However, the National Academy of Sciences WAS) had recommended that the standard be set for the time of peak risk, within the limits imposed by the long-term stability of the geologic environment, which NAS estimated at 1 million years. EPA's standards required that the Department of Energy (DOE) project doses to the time of peak dose but did not apply a compliance standard to these longer term projections. The Court ruled that EPA's 10,000-year compliance period was inconsistent with the NAS recommendation. This aspect of the rule was vacated and remanded to the Agency for revision. In 2005, EPA proposed amendments to the standards. Following public hearings and a public review period, the final amendments were issued in September 2008. This paper discusses the new requirements. (authors)
Environmental radiation protection and information expectations of the public - past and future
International Nuclear Information System (INIS)
Salo, Anneli
1999-01-01
The development of 'environmental radiation protection' and changes in information expectations and needs during the past half a century is approached from three angles, namely changes in the importance of the sources of radionuclides, including the targets of the studies; in protection criteria; and in the society, including the expectations and needs of information. (au)
Zhao, Mengmeng
2017-12-01
The thermal protective performance of the fire fighter protective clothing is of vital importance for fire fighters. In the study fabrics treated by phase change materials (PCMs) were applied in the multi-layered fabrics of the fire fighter protective clothing ensemble. The PCM fabrics were placed at the different layers of the clothing and their thermal protective performance were measured by a TPP tester. Results show that with the application of the PCM fabrics the thermal protection of the multi-layered fabrics was greatly increased. The time to reach a second degree burn was largely reduced. The location of the PCM fabrics at the different layers did not affect much on the thermal protective performance. The higher amount of the PCM adds on, the higher thermal protection was brought. The fabrics with PCMs of a higher melting temperature could contribute to higher thermal protection.
IRPA Regional Congress on Radiation Protection in Central Europe
International Nuclear Information System (INIS)
2003-01-01
The Congress proceedings included 93 papers. The IRPA Congress materials deals with progress the various IRPA initiatives to implement new radiation protection concepts. In accordance to this actual trends the main topics of the congress are 'Clearance levels and material release' and 'Environmental impact assessment of workplaces resp. facilities with radiation sources'. Papers and posters in all traditional radiation protection subjects (general aspects, biological effects of radiation, radiation protection in medicine, dosimetry, instrumentation, quality assurance)
IRPA Regional Congress on Radiation Protection in Central Europe
Energy Technology Data Exchange (ETDEWEB)
NONE
2003-07-01
The Congress proceedings included 93 papers. The IRPA Congress materials deals with progress the various IRPA initiatives to implement new radiation protection concepts. In accordance to this actual trends the main topics of the congress are 'Clearance levels and material release' and 'Environmental impact assessment of workplaces resp. facilities with radiation sources'. Papers and posters in all traditional radiation protection subjects (general aspects, biological effects of radiation, radiation protection in medicine, dosimetry, instrumentation, quality assurance)
Radiological protection, environmental implications, health and risk management: forum
International Nuclear Information System (INIS)
2008-01-01
Topics related to the radioactivity or radiation are presented. The importance of protection and security measures that are required both for public health, occupational health and the medical radiation is analyzed. In addition, it emphasizes the risks faced by professionals who work with radioactivity. Issues that confront the serious environmental implications of such activities are also showed [es
Directory of Open Access Journals (Sweden)
Claudia CĂPĂŢÎNĂ
2014-03-01
Full Text Available Establishment of environmental taxes, called green taxes or eco-taxes, are ways to internalize the environmental costs in the prices of goods or services, causing producers and consumers to use resources more efficiently and sustainably. Green taxes or Pigovian taxes, named after their inventor, Arthur Pigou are known as sin taxes and when are applied to the “sin” of pollution they may be called environmental taxes or eco-taxes. Sustainable development can not be sustained without the existence of adequate measures and effective for protection of the environment. The polluter pays principle is a principle embraced by all countries from the desire do not deplete environmental resources, some of which being non-renewable resources, to be used by future generations. Polluters are both individuals and legal entities who must to respond in one way or another for their irresponsible actions, compensating damages, protecting the environment and paying damages for any casualties. Green taxes can generate a tax reform. Any responsible person will try to manage in another way the resources when has to bear consequences. In this regard, the environment can be protected more effectively and more cost effective for citizens. The effects of irresponsible actions of some of us not only affect the environment but also all animals and vegetable bodies inclusive people.
Aspects relevant to safety and environmental protection correlated with nuclear technology
International Nuclear Information System (INIS)
Naschi, G.
1992-01-01
This paper analyzes the evolution of the most relevant aspects of safety and environmental protection as fundamental elements of the development of nuclear energy in the international framework. The stages leading to the preventive approach to safety in the fifties and in the sixties are also highlighted. During these years, the 'defence in depth' principle was established as the basis for the consequent evolution of the nuclear safety regulations. In this context accident prevention was entrusted to a highly reliable set of redundant systems that could be passive or actuated in a manual or automatic way. In the 1970's, following the accidents of Browns Ferry and Three Mile Island nuclear power plants, an impulse was given to the systematic safety assessment and to the trend of the so-called Probabilistic Risk Assessment (PRA). The paper takes into account the aspects of risk perception as the social effect of Three Mile Island and Chernobyl accidents. This subject has led both to public awareness about the chronic and traumatic risk deriving from a severe accident and, in the international framework, to a process of plants design optimization towards safety and environmental protection. The general aspects of safety and environmental protection are then completed by an overview of the regulatory policies, with particular reference to the licensing procedures developed in Italy
Materials Lifecycle and Environmental Consideration at NASA
Clark-Ingram, Marceia
2010-01-01
The aerospace community faces tremendous challenges with continued availability of existing material supply chains during the lifecycle of a program. Many obsolescence drivers affect the availability of materials: environmental safety ahd health regulations, vendor and supply economics, market sector demands,and natural disasters. Materials selection has become increasingly more critical when designing aerospace hardware. NASA and DoD conducted a workshop with subject matter experts to discuss issues and define solutions for materials selections during the lifecycle phases of a product/system/component. The three primary lifecycle phases were: Conceptualization/Design, Production & Sustainment, and End of life / Reclamation. Materials obsolescence and pollution prevention considerations were explored for the aforementioned lifecycle phases. The recommended solutions from the workshop are being presented.
Ship inspection strategies: effects on maritime safety and environmental protection
Heij, C.; Bijwaard, G.E.; Knapp, S.
2011-01-01
Global trade largely depends on maritime transport, and appropriate ships are needed to protect cargo but to minimize environmental damage and to this end, flag and port state authorities expend considerable effort in ship safety inspections. This paper investigates the safety gains of current
40 CFR 465.20 - Applicability; description of the galvanized basis material subcategory.
2010-07-01
... galvanized basis material subcategory. 465.20 Section 465.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS COIL COATING POINT SOURCE CATEGORY Galvanized Basis Material Subcategory § 465.20 Applicability; description of the galvanized basis material...
Science to Support Informed Decision-Making: Examples from the US Environmental Protection Agency
The mission of the United States Environmental Protection Agency (US EPA) is to protect human health and the environment. We work to achieve our mission through a combination of applied research and technical guidance for localities, states, tribes, and regions to best manage the...
International Nuclear Information System (INIS)
1976-09-01
In March of 1976 The Royal Commission on Environmental Pollution informed the Board that they had decided to enquire into the organisation for radiological safety in this country, with particular regard to the environmental hazards from radioactivity that might arise from the increasing use of nuclear energy for the generation of electrical power. The Board was invited to submit evidence on any aspects with which it was concerned and, in particular, on its powers and responsibilities and relationships with other bodies; the Board was also asked to discuss the assessment of radiation hazards and the application in practice of the recommendations of the International Commission on Radiological Protection. This is the Board's response. The constitution, functions and responsibilities of the Board are discussed in Chapter 1 as is the involvement of its staff in national and international affairs in the field of radiological protection. Chapter consists of a short statement of the various sources of radiation to which the people of the UK are exposed. The Board does not claim any special experience or expertise in one of the matters referred to in the third area of concern, namely, the criteria used for the siting of nuclear power stations. But in the related field of assessing the environmental consequences of reactor accidents, the Board has been actively involved with the Medical Research Council in their latest review of Emergency Reference Levels - a report on which is shortly to be published. This subject is referred to in Chapter 3 which deals with the methods by which the basic recommendations of the International Commission on Radiological Protection are translated into values that can be applied to particular forms of practice. Chapter 4 discusses the current position of gaseous, liquid and solid wastes arising from nuclear power cycles. It also briefly discusses the way in which this position may change in future and touches on the problems of decommissioning
Chemical Fingerprinting of Materials Developed Due To Environmental Issues
Smith, Doris A.; McCool, A. (Technical Monitor)
2000-01-01
This paper presents viewgraphs on chemical fingerprinting of materials developed due to environmental issues. Some of the topics include: 1) Aerospace Materials; 2) Building Blocks of Capabilities; 3) Spectroscopic Techniques; 4) Chromatographic Techniques; 5) Factors that Determine Fingerprinting Approach; and 6) Fingerprinting: Combination of instrumental analysis methods that diagnostically characterize a material.
Fact sheet on uranium exploration, mining production and environmental protection
International Nuclear Information System (INIS)
2006-01-01
During the last 3 years, there has been a dramatic revival and comeback of the uranium industry in the light of the expanding nuclear power programme all over the world. As a result, there has been a boom in uranium exploration, mining and production activities to meet the higher demand of uranium and reduce the gap between uranium demand and uranium supply from mines. In coming years, additional requests for TC, training/workshop and CRPs are expected in the areas of: 1) advanced aerial and ground geophysical techniques for discovery of new deposits which could be deeply buried; 2) investigations of uranium sources in sedimentary, igneous and metamorphic environments; 3) In-Situ leaching (ISL) of uranium deposits; 4) advanced acid/alkali leaching of low, medium and high grade uranium ores and purification of uranium; 5) reclamation of used uranium mines and related environmental protection issues; and 6) uranium supply, demand and market issues. Services provided by the Nuclear Fuel Cycle and Materials Section could be workshops and hands-on field trainings at National and/or Regional levels in mines, mills and sites covering the following activities: uranium exploration involving conventional and advanced geophysical techniques and instruments, advanced drilling equipment and tools, etc.; uranium mining (open-cast and underground), recovery and purification by acid/alkali leaching, In-Situ leaching (ISL), purification by conventional and advanced solvent extraction and ion exchange techniques and concentration of uranium in the form of yellowcake (ammonium diuranate, magnesium diuranate and uranium peroxide); promoting best practices in uranium mining and milling (including tailing pond), covering environmental issues, reclamation of used uranium mines and chemistry of uranium production cycle and ground water and sustainability of uranium production. Member States interested in uranium geology, exploration, mining, milling, purification and environmental issues
Structural adhesives for missile external protection material
Banta, F. L.; Garzolini, J. A.
1981-07-01
Two basic rubber materials are examined as possible external substrate protection materials (EPM) for missiles. The analysis provided a data base for selection of the optimum adhesives which are compatible with the substrate, loads applied and predicted bondline temperatures. Under the test conditions, EA934/NA was found to be the optimum adhesive to bond VAMAC 2273 and/or NBR/EPDM 9969A to aluminum substrate. The optimum adhesive for composite structures was EA956. Both of these adhesives are two-part epoxy systems with a pot life of approximately two hours. Further research is suggested on field repair criteria, nuclear hardness and survivability effects on bondline, and ageing effects.
Wiesner, Valerie L.; Bansal, Narottam P.
2015-01-01
Particulates, like sand and volcanic ash, threaten the development of robust environmental barrier coatings (EBCs) that protect next-generation silicon-based ceramic matrix composite (CMC) turbine engine components from harsh combustion environments during service. The siliceous particulates transform into molten glassy deposits of calcium-magnesium aluminosilicate (CMAS) when ingested by an aircraft engine operating at temperatures above 1200C. In this study, a sample of desert sand was melted into CMAS glass to evaluate high-temperature interactions between the sand glass and an advanced EBC material. Desert sand glass was added to the surface of hot-pressed EBC substrates, which were then heated in air at temperatures ranging from 1200C to 1500C. Scanning electron microscopy and X-ray energy-dispersive spectroscopy were used to evaluate microstructure and phase compositions of specimens and the CMASEBC interface after heat treatments.
International Nuclear Information System (INIS)
Ronellenfitsch, M.; Wolf, R.
1986-01-01
In the opinion of the author an substantial extension of the protection of the individual against environmental encroachments is not necessary. In many fields of law, for instance in the atomic law or the law for the protection against nuisance, the protection of the individual can be improved by minor corrections. In civil law the same improvement can be gained by an interpretation of existing provisions taking into account the requirements of environmental protection. (WG) [de
Improvement of Students’ Environmental Literacy by Using Integrated Science Teaching Materials
Suryanti, D.; Sinaga, P.; Surakusumah, W.
2018-02-01
This study aims to determine the improvement of student environmental literacy through the use of integrated science teaching materials on pollution topics. The research is used weak experiment method with the one group pre-test post-test design. The sample of the study were junior high school students in Bandung amounted to 32 people of 7th grade. Data collection in the form of environmental literacy test instrument consist of four components of environmental literacy that is (1) Knowledge, (2) Competencies (Cognitive Skill), (3) Affective and (4) Environmentally Responsible Behavior. The results show that the student’s environmental literacy ability is improved after using integrated science teaching materials. An increase in the medium category is occurring in the knowledge (N-gain=46%) and cognitive skill (N-gain=31%), while the increase in the low category occurs in the affective component (N-gain=25%) and behaviour (N-gain=24%). The conclusions of this study as a whole the improvement of students’ environmental literacy by using integrated science teaching material is in the medium category (N-gain=34%).
Application of Green Environmentally Friendly Materials in Food Packaging
Jixia Li
2017-01-01
With social development, requirements on the spiritual and material life have increased. However, some environmental issues appear, for example, in food packaging. Application of environment-friendly materials in food packaging has been more and more attractive. This study analyses the characteristics of degradable food packaging material and the existing problems, proposes the manufacturing of food packaging with poly(lactic acid)/nanocrystalline cellulose composite material, tests its therm...
Szuba, Marek
2006-01-01
This paper presents the most important elements of the localization procedure of high voltage overhead lines and substations and radiocommunication objects which are the source of electromagnetic fields. These fields are perceived as a major threat to human health. The point of departure to make a choice of investments is the special classification of technical installations described in one of the executive directive issued by virtue of the Environmental Protection Act. This special executive directive enumerates a lot of technical objects (installation), classified in the group of investments which have significant impact on the environment and some objects which could be classified in this group. For all this technical installations (e.g., overhead high voltage power lines) the provisions of the Environmental Protection Act impose an obligation to take particular steps to assure transparency of the environmental protection procedures, transborder procedures and the protection of areas included in the Natura 2000 network.
Energy Technology Data Exchange (ETDEWEB)
Vindimian, E; Boeglin, N; Houillon, G; Osset, Ph; Vial, E; Leguern, Y; Gosse, G; Gabrielle, B; Dohy, M; Bewa, H; Rigal, L; Guilbert, St; Cesar, G; Pandard, P; Oster, D; Normand, N; Piccardi, M; Garoux, V; Arnaud, L; Barbier, J; Mougin, G; Krausz, P; Pluquet, V; Massacrier, L; Dussaud, J
2005-07-01
The French agency of environment and energy mastery (Ademe) and the agency of Agriculture for chemistry and energy (Agrice) have jointly organized these technical days about the potentialities of plant-based products in front of the big environmental stakes of the diversification of energy sources, the development of new outputs for agriculture and the opening of new fields of industrial innovation. This document gathers the articles and transparencies of the presentations given during these 2 days of conference: 1 - Biomass and life cycle analysis (LCA) - impacts and benefits: introduction to LCA (E. Vindimian), keys to understand this environmental evaluation tool (N. Boeglin); environmental status of plant-based industries for chemistry, materials and energy: LCA knowledge status, plant versus fossil (G. Houillon), detailed analysis of 2 industries: agro-materials and bio-polymers (J. Payet); example of environmental and LCA studies: energy and greenhouse gas statuses of the biofuel production processes (P. Osset, E. Vial), LCA of collective and industrial wood-fueled space heating (Y. Leguern), contribution and limitations of LCA for plant-based industries (G. Gosse, B. Gabrielle), conclusion of the first day (M. Dohy). 2 - Biomass and materials: a reality: biomaterials in the Agrice program (H. Bewa), plant-derived materials: resources, status and perspectives (L. Rigal); biopolymers: overview of the industrial use of biopolymers: materials and markets, applications (S. Guibert), degradation mechanisms of biopolymers used in agriculture: biodegradability, eco-toxicity and accumulation in soils (G. Cesar, P. Pandard), present and future regulatory framework: specifications and methods of biodegradability evaluation of materials for agriculture and horticulture (D. Oster), standardization: necessity and possibilities (N. Normand); vegetable fibers and composite materials: market of new vegetable fiber uses (M. Piccardi, V. Garoux), vegetable particulates and
On the Radiation Protection of the Environment
International Nuclear Information System (INIS)
Soberhart, L. J.; Clausse, A.; D'Amato, E.
2004-01-01
Over the last decade, substantial advances in what is know as legal protection of the environment, -as a different matter from human being protection- have been made. Some national legislations include serious penalties against environmental damage. It is becoming customary to consider a serious offence any excess in the prescribed limits of radioactive materials release to the environment. What these limits mean, however, is not completely clear nowadays. According to the International Commission on Radiological Protection (ICRP) the standards of environmental control needed to protect man to the degree currently thought desirable will ensure that other species are not put at risk, although, occasionally, individual members of non human species might be harmed. However the use of limits of radioactive releases resulting from the direct application of ICRP recommend limits as legal references for the applicable offences in environmental protection is certainly a misconception. In this paper a conceptual framework for the calculation of legal limits for environmental radioprotection are presented. The approach is based on an ecosystem perspective, assessing the impact of radioactive releases on the ecosystem dynamics and equilibrium. The method is based on functional groups models -i.e. groups of species that are selected from a number of criteria such as play similar rules in the chain of nutrients or have the same radiosensitivity- providing the basis for prescribed limits of the radioactive material release to the environment. The methodology is applied to a system of three functional groups in equilibrium, with is affected by radioactive intrusion. Different impacts on the equilibrium can be identified, depending on the amount of radioactive material released to the environment. It is shown how the concept of equilibrium breakdown can be applied in order to assess the radiological impact. (Author) 8 refs
Ultrasonic tests on materials with protective coatings
International Nuclear Information System (INIS)
Whaley, H.L.
1977-01-01
Protective coatings are applied to some nuclear components such as reactor vessels to inhibit surface corrosion. Since in-service ultrasonic inspection is required for such components, a study was performed to determine whether the use of protective coatings can affect ultrasonic tests. Two 2 in. thick steel plates were uniformly machined, sandblasted, and used as bases for two types of protective coatings. The type and thickness of the coating and the presence of contamination, such as fingerprints or mild oxidation under the paint, were the independent variables associated with the coating. Tests were run to determine the effects of the protective coatings on ultrasonic tests conducted on the steel plates. Significant variations in ultrasonic test sensitivity occurred as a function of the type and thickness of protective coating, couplant (material that conducts the ultrasound from the transducer into the test part, normally water or some type of oil), transducer wear plate, and ultrasonic test frequency. Ultrasonic tests can be strongly affected by a protective coating on the component to be inspected. As compared to the test sensitivity for an uncoated reference sample, the sensitivity may be dramatically shifted up or down on the coated surface. In certain coating thickness ranges, the sensitivity can fluctuate widely with small changes in coating thickness. If a coating is chosen properly, however, components with protective coatings can be tested ultrasonically with valid results. These results are for the case of ultrasonic input on the coated surface. It is not expected that an ultrasonic test conducted from the front surface would be appreciably affected by a coating on the rear surface
A DSS for sustainable development and environmental protection of agricultural regions.
Manos, Basil D; Papathanasiou, Jason; Bournaris, Thomas; Voudouris, Kostas
2010-05-01
This paper presents a decision support system (DSS) for sustainable development and environmental protection of agricultural regions developed in the framework of the Interreg-Archimed project entitled WaterMap (development and utilization of vulnerability maps for the monitoring and management of groundwater resources in the ARCHIMED areas). Its aim is to optimize the production plan of an agricultural region taking in account the available resources, the environmental parameters, and the vulnerability map of the region. The DSS is based on an optimization multicriteria model. The spatial integration of vulnerability maps in the DSS enables regional authorities to design policies for optimal agricultural development and groundwater protection from the agricultural land uses. The DSS can further be used to simulate different scenarios and policies by the local stakeholders due to changes on different social, economic, and environmental parameters. In this way, they can achieve alternative production plans and agricultural land uses as well as to estimate economic, social, and environmental impacts of different policies. The DSS is computerized and supported by a set of relational databases. The corresponding software has been developed in a Microsoft Windows XP platform, using Microsoft Visual Basic, Microsoft Access, and the LINDO library. For demonstration reasons, the paper includes an application of the DSS in a region of Northern Greece.
Space Environmental Effects on Materials and Processes
Sabbann, Leslie M.
2009-01-01
The Materials and Processes (M&P) Branch of the Structural Engineering Division at Johnson Space Center (JSC) seeks to uphold the production of dependable space hardware through materials research, which fits into NASA's purpose of advancing human exploration, use, and development of space. The Space Environmental Effects projects fully support these Agency goals. Two tasks were assigned to support M&P. Both assignments were to further the research of material behavior outside of Earth's atmosphere in order to determine which materials are most durable and safe to use in space for mitigating risks. One project, the Materials on International Space Station Experiments (MISSE) task, was to compile data from International Space Station (ISS) experiments to pinpoint beneficial space hardware. The other project was researching the effects on composite materials of exposure to high doses of radiation for a Lunar habitat project.
International Nuclear Information System (INIS)
Kulyukhin, Sergei A.; Mikheev, Nikolai B.; Falkovskii, Leo N.; Reshetov, Leo A.; Zvetkova, Marianna Ya.; Yagodkin, Ivan V.; Osipov, Viktor P.; Skvortsov, Sergei S.; Berkovich, Viktor M.; Taranov, Gennadii S.; Grigor'ev, Mikhail M.; Meshkov, Vladimir M.; Noskov, Andrei A.; Mitrofanov, Mikhail I.
2008-01-01
This paper reports new solutions for increasing environmental protection during severe accidents at NPPs. For NPPs with two protective shells and pressure release system such as WWER-1000 we suggest a new comprehensive, passive-mode environmental protection system of decontamination of the radioactive air-steam mixture from the containment and the inter-containment area, which includes the 'wet' stage (scrubbers, etc.), the 'dry' stage (sorption module), and also an ejector, which in a passive mode is capable of solving the multi-purpose task of decontamination of the air-steam mixture. For Russian WWER-440/230 NPPs we suggest three protection levels: 1) a jet-vortex condenser; 2) the spray system; 3) a sorption module. For modern designs of new generation NPPs, which do not provide for pressure release systems, we proposed a new passive filtering system together with the passive heat-removal system, which can be used during severe accidents in case all power supply units become unavailable. (authors)
Energy Technology Data Exchange (ETDEWEB)
Kulyukhin, Sergei A.; Mikheev, Nikolai B. [Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences, Moscow (Russian Federation); Falkovskii, Leo N.; Reshetov, Leo A.; Zvetkova, Marianna Ya. [All-Russian Research Institute of Atomic Machine-Building, Moscow, Russia (Russian Federation); Yagodkin, Ivan V.; Osipov, Viktor P.; Skvortsov, Sergei S. [Institute of Physics and Power Engineering, Obninsk (Russian Federation); Berkovich, Viktor M.; Taranov, Gennadii S.; Grigor' ev, Mikhail M. [Institute ' Atomenergoproekt' , Moscow (Russian Federation); Meshkov, Vladimir M.; Noskov, Andrei A.; Mitrofanov, Mikhail I. [ROSENERGOATOM Concern, Moscow (Russian Federation)
2008-07-01
This paper reports new solutions for increasing environmental protection during severe accidents at NPPs. For NPPs with two protective shells and pressure release system such as WWER-1000 we suggest a new comprehensive, passive-mode environmental protection system of decontamination of the radioactive air-steam mixture from the containment and the inter-containment area, which includes the 'wet' stage (scrubbers, etc.), the 'dry' stage (sorption module), and also an ejector, which in a passive mode is capable of solving the multi-purpose task of decontamination of the air-steam mixture. For Russian WWER-440/230 NPPs we suggest three protection levels: 1) a jet-vortex condenser; 2) the spray system; 3) a sorption module. For modern designs of new generation NPPs, which do not provide for pressure release systems, we proposed a new passive filtering system together with the passive heat-removal system, which can be used during severe accidents in case all power supply units become unavailable. (authors)
Background radioactivity in environmental materials
International Nuclear Information System (INIS)
Maul, P.R.; O'Hara, J.P.
1989-01-01
This paper presents the results of a literature search to identify information on concentrations of 'background' radioactivity in foodstuffs and other commonly available environmental materials. The review has concentrated on naturally occurring radioactivity in foods and on UK data, although results from other countries have also been considered where appropriate. The data are compared with established definitions of a 'radioactive' substance and radionuclides which do not appear to be adequately covered in the literature are noted. (author)
Protection of historic buildings against environmental pollution of vibrations
Directory of Open Access Journals (Sweden)
Kowalska-Koczwara Alicja
2016-01-01
Full Text Available Historic buildings in Poland are largely neglected objects that small percentage is preserved in its original form. Unrelenting in the case of historic buildings is a time that brings with it the natural processes of aging of buildings, but also the history of the object which is often marked by military conflicts, fires or even incompetently carried out reconstruction. Nowadays historic buildings are also destroyed by the rapid development of infrastructure and residential construction. This development could lead to changes of water in the soil, make changes in the geologic al structure or cause exposure of the historic building to the new influences (eg. traffic vibrations, to which building has not been subjected so far. Vibrations are often omitted in environmental issues, although the protection against noise and vibration has its place in the Law on Environmental Protection. This article presents the methodology for the measurement and interpretation of vibration influence on historic buildings and the assessment methods of technical condition of historic building on the example of dynamic measurements made on St. Nicholas Church in Krakow. The importance of well-done crack-by-crack documentation and characterization of damages based on damage index is shown. Difficulties that can be encountered when determining the causes of technical condition of historic buildings are also shown. Based on the example of the Church in the article are also given the possible protection solutions of historic structures from vibrations.
Yin, Guanyi; Liu, Liming; Yuan, Chengcheng
2015-07-01
This study primarily examined the assessment of environmental risk in high intensity agricultural areas. Dongting Lake basin was taken as a case study, which is one of the major grain producing areas in China. Using data obtained from 1989 to 2012, we applied Material Flow Analysis (MFA) to show the material consumption, pollutant output and production storage in the agricultural-environmental system and assessed the environmental risk index on the basis of the MFA results. The results predicted that the status of the environmental quality of the Dongting Lake area is unsatisfactory for the foreseeable future. The direct material input (DMI) declined by 13.9%, the domestic processed output (DPO) increased by 28.21%, the intensity of material consumption (IMC) decreased by 36.7%, the intensity of material discharge (IMD) increased by 10%, the material productivity (MP) increased by 27 times, the environmental efficiency (EE) increased by 15.31 times, and the material storage (PAS) increased by 0.23%. The DMI and DPO was higher at rural places on the edge of cities, whereas the risk of urban agriculture has arisen due to the higher increasing rate of DMI and DPO in cities compared with the counties. The composite environmental risk index increased from 0.33 to 0.96, indicating that the total environmental risk changed gradually but seriously during the 24 years assessed. The driving factors that affect environmental risk in high intensity agriculture can be divided into five classes: social, economic, human, natural and disruptive incidents. This study discussed a number of effective measures for protecting the environment while ensuring food production yields. Additional research in other areas and certain improvements of this method in future studies may be necessary to develop a more effective method of managing and controlling agricultural-environmental interactions.
The environmental and medical geochemistry of potentially hazardous materials produced by disasters
Plumlee, Geoffrey S.; Morman, Suzette A.; Meeker, G.P.; Hoefen, Todd M.; Hageman, Philip L.; Wolf, Ruth E.
2014-01-01
Many natural or human-caused disasters release potentially hazardous materials (HM) that may pose threats to the environment and health of exposed humans, wildlife, and livestock. This chapter summarizes the environmentally and toxicologically significant physical, mineralogical, and geochemical characteristics of materials produced by a wide variety of recent disasters, such as volcanic eruptions, hurricanes and extreme storms, spills of mining/mineral-processing wastes or coal extraction by-products, and the 2001 attacks on and collapse of the World Trade Center towers. In describing these characteristics, this chapter also illustrates the important roles that geochemists and other earth scientists can play in environmental disaster response and preparedness. In addition to characterizing in detail the physical, chemical, and microbial makeup of HM generated by the disasters, these roles also include (1) identifying and discriminating potential multiple sources of the materials; (2) monitoring, mapping, and modeling dispersal and evolution of the materials in the environment; (3) understanding how the materials are modified by environmental processes; (4) identifying key characteristics and processes that influence the materials' toxicity to exposed humans and ecosystems; (5) estimating shifts away from predisaster environmental baseline conditions; and (6) using geochemical insights learned from past disasters to help estimate, prepare for, and increase societal resilience to the environmental and related health impacts of future disasters.
International Nuclear Information System (INIS)
Lee, Sang-Kook; Shin, Jae-Chul
2003-01-01
Protective coating materials used in the containment structures should be durable for the designed 30 to 40 year lifetime of a nuclear power plant. At the present, these materials have not yet been developed. Therefore it is very important to keep the durability of the protective coating materials through persistent maintenance, and in order to achieve this, understanding the adhesion characteristics of the coating materials is of utmost importance. Therefore, this study attempts to find any methods for durability maintenance of these protective coating materials. To accomplish these aims, this study applied an experimental deterioration environment condition relevant to Loss of Coolant Accident (LOCA) and Main Steam Line Break (MSLB), categorized as of Design Basis Accident (DBA), onto steel liner plate specimens covered with protective coating materials. Adhesion tests were performed on these deteriorated coating materials to characterize the physical properties and through these tests, the quantitative adhesion characteristics according to the history of deterioration environment were found
THE IMPORTANCE OF ENVIRONMENTAL PROTECTION IN CSR POLICY
Directory of Open Access Journals (Sweden)
Rosca Mihai Ioan
2011-12-01
Full Text Available The CSR policy of companies occupy a privileged environment through coaching programs to other interests such as employees, suppliers, customers, authorities and various NGOs. This is why we wanted to see what the environment is important for managers on companies in Romania, the company's CSR policy. In the literature the definition of social responsibility and ways to implement this in practice are often encountered. Some authors claim that societal marketing concept has not found its way into the language of business. From here, there were other terms that had a greater impact on the business environment such as social responsibility. Increasing the company's impact on the environment, the pressure exerted by stakeholders, and identifying positive elements of socially responsible approach have been the main stimulus for development of social responsibility. From that a lot of studies on academic and commercial problem. And the present study fit the same line we conducted a research on 50 companies,it was an exploratory research. As respondents were chosen only marketing managers or general managers or even owners compnaie depending, in other words I tried to go directly to company decision makers in developing and building its image. While this one sample is statistically representative of the point of view we have covered with him in all areas of business activities and of all sizes can say that the results provide a clear enough picture of managersmentality in companies in Romania on business activities with the problem of intereactiunii environment Managers of companies in Romania recognize the environmental problems and say they are implicating in various actions to protect the environment. On the declarative level social environment is one of the most important areas being the most nominated as one of the top three areas of social nature that would involve having the greatest opportunity for development in coming years, over 60% of
Ship Inspection Strategies: Effects on Maritime Safety and Environmental Protection
C. Heij (Christiaan); G.E. Bijwaard (Govert); S. Knapp (Sabine)
2010-01-01
textabstractGlobal trade depends for a large part on maritime transport, and safe ships are needed not only to protect precious cargo but also to prevent environmental damage. Flag state and port state authorities spend much effort in ship safety inspections to ensure a minimum safety level and to
Shellac/nanoparticles dispersions as protective materials for wood
Weththimuni, Maduka L.; Capsoni, Doretta; Malagodi, Marco; Milanese, Chiara; Licchelli, Maurizio
2016-12-01
Wood is a natural material that finds numerous and widespread applications, but is subject to different decay processes. Surface coating is the most common method used to protect wood against deterioration and to improve and stabilize its distinctive appearance. Shellac is a natural resin that has been widely used as a protective material for wooden artefacts (e.g. furniture, musical instruments), due to its excellent properties. Nevertheless, diffusion of shellac-based varnishes has significantly declined during the last decades, because of some limitations such as the softness of the coating, photo-degradation, and sensitivity to alcoholic solvents and to pH variations. In the present study, different inorganic nanoparticles were dispersed into dewaxed natural shellac and the resulting materials were investigated even after application on wood specimens in order to assess variations of the coating properties. Analyses performed by a variety of experimental techniques have shown that dispersed nanoparticles do not significantly affect some distinctive and desirable features of the shellac varnish such as chromatic aspect, film-forming ability, water repellence, and adhesion. On the other hand, the obtained results suggested that some weak points of the coating, such as low hardness and poor resistance to UV-induced ageing, can be improved by adding ZrO2 and ZnO nanoparticles, respectively.
Classified facilities for environmental protection
International Nuclear Information System (INIS)
Anon.
1993-02-01
The legislation of the classified facilities governs most of the dangerous or polluting industries or fixed activities. It rests on the law of 9 July 1976 concerning facilities classified for environmental protection and its application decree of 21 September 1977. This legislation, the general texts of which appear in this volume 1, aims to prevent all the risks and the harmful effects coming from an installation (air, water or soil pollutions, wastes, even aesthetic breaches). The polluting or dangerous activities are defined in a list called nomenclature which subjects the facilities to a declaration or an authorization procedure. The authorization is delivered by the prefect at the end of an open and contradictory procedure after a public survey. In addition, the facilities can be subjected to technical regulations fixed by the Environment Minister (volume 2) or by the prefect for facilities subjected to declaration (volume 3). (A.B.)
Environmental protection and procedural law
International Nuclear Information System (INIS)
Mutschler, U.
1978-01-01
For the power industry which is 'independent of licensing', the Ule/Laubinger statement as well as its discussion on the 52th German legal experts' day are of considerable importance. It is therefore absolutely necessary to critically investigate the statements of this expert's opinion and the considerations on which they are based. This investigation is limited to those licensing procedures which in the terminology of experts, are 'similar to the plan approval procedure'. This applies mainly to the procedures according to paragraph 4 ff of the Federal Act on the Protection Against Nuisances and paragraph 7 of the Atomic Energy Law: Preliminaries publication of documents, inspection of files, public hearing, taking of evidence, persons with special responsibilities, administrative proceedings, actions by associations. The deficiencies in the execution of environmental procedural law is briefly mentioned. The notes in the article refer only to air pollution. (orig./HP) [de
International Nuclear Information System (INIS)
1998-01-01
The All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection is cyclic (in 3 year period) conference being a broad review of state of art and development of all nuclear branches cooperated with industry and other branches of national economy and public life in Poland. The conference has been divided in one plenary session and 8 problem sessions as follow: Radiation technologies of flue gas purification; radiation technologies in food and cosmetic industry; application of nuclear techniques in environmental studies and earth science; radiometric methods in material engineering; isotope tracers in biological studies and medical diagnostics; radiometric industrial measuring systems; radiation detectors and device; nuclear methods in cultural objects examination. The poster section as well as small exhibition have been also organised
[Safeguards for the physical protection of nuclear materials and facilities
International Nuclear Information System (INIS)
Jones, O.E.
1975-01-01
Testimony is given on the subject of safeguards for the physical protection of nuclear materials and facilities, particularly during transportation. The ERDA nation-wide safe-secure transportation system and the Safe-Secure Trailer are described. The nationwide ERDA voice communication system is also described. Development of hardware and systems is discussed. The use of adversary simulation for evaluating protection systems is mentioned
Veterinarians in environmental protection; Il veterinario nella protezione ambientale
Energy Technology Data Exchange (ETDEWEB)
Ioppolo, A; Achene, L; Cappella, M G [eds.; Istituto Superiore di Sanita' , Rome (Italy). Lab. di Medicina Veterinaria
1999-07-01
The main contributions of the Fifth and Sixth Courses: Veterinary medicine and environmental contamination, held at the Italian National Institute of Health on October 27-31 1997, and September 28-October 2 1998, are presented. The volume is divided into three sections: general concepts (evolution of environmental protection in the European community, veterinary drugs in Europe, drugs and environmental contamination, aquaculture and environmental contamination); problematic aspects and methodologies applied to the environmental pollution (animal pathologies and environmental quality, toxic algae and aquaculture, aquatic organisms as indicators of environmental contamination, use of arthropods to assess environmental quality); field experiences (monitoring of chemical contaminants by an experimental institute of veterinary services, quality of compost in the light of aspects of management and market). [Italian] Sono riportati alcuni interventi presentati al quinto e al sesto corso di medicina veterinaria ed inquinamento ambientale che si sono svolti rispettivamente il 27-31 ottobre 1997 e il 28 settembre-2 ottobre 1998 presso l'Istituto Superiore di Sanita'. Il volume e' diviso in tre sezioni: contributi generali (evoluzione della tutela ambientale nella Comunita' Europea, i farmaci veterinari in Europa), utilizzo di farmaci e inquinamento (patologie degli animali e inquinamento, alghe tossiche e acquacultura, metodi per la valutazione della qualita' ambientale con organismi acquatici, artropodi terrestri come bioindicatori); esperienze sul campo (compostaggio di qualita'); problematiche gestionali e di mercato, esperienze di un monitoraggio di contaminanti chimici in un istituto zooprofilattico sperimentale.
Veterinarians in environmental protection; Il veterinario nella protezione ambientale
Energy Technology Data Exchange (ETDEWEB)
Ioppolo, A.; Achene, L.; Cappella, M.G. [eds.] [Istituto Superiore di Sanita' , Rome (Italy). Lab. di Medicina Veterinaria
1999-07-01
The main contributions of the Fifth and Sixth Courses: Veterinary medicine and environmental contamination, held at the Italian National Institute of Health on October 27-31 1997, and September 28-October 2 1998, are presented. The volume is divided into three sections: general concepts (evolution of environmental protection in the European community, veterinary drugs in Europe, drugs and environmental contamination, aquaculture and environmental contamination); problematic aspects and methodologies applied to the environmental pollution (animal pathologies and environmental quality, toxic algae and aquaculture, aquatic organisms as indicators of environmental contamination, use of arthropods to assess environmental quality); field experiences (monitoring of chemical contaminants by an experimental institute of veterinary services, quality of compost in the light of aspects of management and market). [Italian] Sono riportati alcuni interventi presentati al quinto e al sesto corso di medicina veterinaria ed inquinamento ambientale che si sono svolti rispettivamente il 27-31 ottobre 1997 e il 28 settembre-2 ottobre 1998 presso l'Istituto Superiore di Sanita'. Il volume e' diviso in tre sezioni: contributi generali (evoluzione della tutela ambientale nella Comunita' Europea, i farmaci veterinari in Europa), utilizzo di farmaci e inquinamento (patologie degli animali e inquinamento, alghe tossiche e acquacultura, metodi per la valutazione della qualita' ambientale con organismi acquatici, artropodi terrestri come bioindicatori); esperienze sul campo (compostaggio di qualita'); problematiche gestionali e di mercato, esperienze di un monitoraggio di contaminanti chimici in un istituto zooprofilattico sperimentale.
Energy Technology Data Exchange (ETDEWEB)
NONE
1977-07-01
The Specialists Meeting on Properties of Primary Circuit Structural Materials of LMFBRs covered the following topics: overview of materials program in different countries; mechanical properties of materials in air; fracture mechanics studies - component related activities; impact of environmental influences on mechanical properties; relationship of material properties and design methods. The purpose of the meeting was to provide a forum for exchange of information on structural materials behaviour in primary circuit of fast breeder reactors. Special emphasis was placed on environmental effects such as influence of sodium and irradiation on mechanical properties of reactor materials.
International Nuclear Information System (INIS)
1977-01-01
The Specialists Meeting on Properties of Primary Circuit Structural Materials of LMFBRs covered the following topics: overview of materials program in different countries; mechanical properties of materials in air; fracture mechanics studies - component related activities; impact of environmental influences on mechanical properties; relationship of material properties and design methods. The purpose of the meeting was to provide a forum for exchange of information on structural materials behaviour in primary circuit of fast breeder reactors. Special emphasis was placed on environmental effects such as influence of sodium and irradiation on mechanical properties of reactor materials
RCRA Sustainable Materials Management Information
U.S. Environmental Protection Agency — This asset includes a broad variety of documents, descriptive data, technical analyses and guidance materials relative to voluntary improvements in resource...
Dignity of environmental protection. A lesson well learnt by the Facto cement Islamabad
International Nuclear Information System (INIS)
Siddique, B.; Hussain, M.M.
2005-01-01
FECTO Cement, Islamabad was commissioned in the late 80's to cope the ever-increasing demand of building material in Pakistan. The first ever heavy industry issued license in the Capital area. At that time, environmental issues in Pakistan were merely a subject, discussed only by the professionals in their drawing rooms. The Management of Fecto Cement foresaw the now's burning whirlpool issue and fabricated the company's policy under the slogan ' no race will prosper until it learns the dignity of environmental protection'. The Management's true commitment, consistent, support and steps taken to preserve the biodiversity of eco system in surrounding including Social impacts were discussed. Every industrial process has certain adverse effects on environment. The only way to cope / fight them is approximation, which minimizes those to such an extent that they become appreciably harmless to Biodiversity. Plantation of thousands of plant's and orchids in suburb by Fecto cement, employing costly but highly efficient dust collectors besides Cone's which consume 13 % of the plant energy. To reduce SO/sub x/ in emission gases designing of the efficient and trust worthy Raw meal design, use of low SO/sub x. fuels stagnant Quality Control System and environmentally efficient GMP's enforced in production area plus the supply to municipal facilities like fresh water, schools for children specially girls and jobs to fight the ever increasing unemployment in Islamabad, Made it a prestigious, trust worthy environmental friendly state of the art industrial establishment, which stood as a hallmark and glittering example to other industrial enterprises in Pakistan. (author)
A protocol for lifetime energy and environmental impact assessment of building insulation materials
International Nuclear Information System (INIS)
Shrestha, Som S.; Biswas, Kaushik; Desjarlais, Andre O.
2014-01-01
This article describes a proposed protocol that is intended to provide a comprehensive list of factors to be considered in evaluating the direct and indirect environmental impacts of building insulation materials, as well as detailed descriptions of standardized calculation methodologies to determine those impacts. The energy and environmental impacts of insulation materials can generally be divided into two categories: (1) direct impact due to the embodied energy of the insulation materials and other factors and (2) indirect or environmental impacts avoided as a result of reduced building energy use due to addition of insulation. Standards and product category rules exist, which provide guidelines about the life cycle assessment (LCA) of materials, including building insulation products. However, critical reviews have suggested that these standards fail to provide complete guidance to LCA studies and suffer from ambiguities regarding the determination of the environmental impacts of building insulation and other products. The focus of the assessment protocol described here is to identify all factors that contribute to the total energy and environmental impacts of different building insulation products and, more importantly, provide standardized determination methods that will allow comparison of different insulation material types. Further, the intent is not to replace current LCA standards but to provide a well-defined, easy-to-use comparison method for insulation materials using existing LCA guidelines. - Highlights: • We proposed a protocol to evaluate the environmental impacts of insulation materials. • The protocol considers all life cycle stages of an insulation material. • Both the direct environmental impacts and the indirect impacts are defined. • Standardized calculation methods for the ‘avoided operational energy’ is defined. • Standardized calculation methods for the ‘avoided environmental impact’ is defined
International Nuclear Information System (INIS)
Juppe, Alain; Fillon, Francois
2011-01-01
This document deals with the amendment to the Convention on the Physical Protection of Nuclear Materials which has been adopted in July 2005. This amendment notably extended the Convention's scope, objectives, relation with other international instruments and content (regarding cooperation, sanctions, and so on). After the text of this amendment, this document contains the bill project which reports an impact study (estimated economic, financial, environmental, and legal consequences of the amendment implementation), comments the penal and criminal cooperation defined in the Convention. A table indicates the impact of the amendment's articles on the French law
International Nuclear Information System (INIS)
Recht, P.
1977-01-01
Following the United Nations Conference in Stockholm, 1972, on the protection of the environment a certain number of principles and methods have been put forward to national authorities which put into effect environmental protection programmes. Several of these principles have been taken directly from and inspired by the field of application of radiological protection; it is not without interest to draw comparisons between those which have been conceived and applied in health physics for the prevention of a radioactivity risk as it applies to the population, and those which already exist or which are envisaged vis-a-vis the risks from non radioactive pollutants. It is opportune to remember that the ICRP publications, in particular those published in and after 1958, included recommendations on radiological protection, and that these recommendations laid down the bases for both the theoretical steps and the practical methodology of which the main components are still in existence today; a remarkable achievement which merits emphasis. The ICRP recommendations included in publication 1 and more particularly publications 7, 9 and 22 introduced the basic concepts of a health physics policy which can be recognized as having been beneficial for the protection of man and his environment and which can be utilized as a basis for consideration, if not action, as it concerns the non-radioactive environmental pollutants [fr
Xu, Xu; Li, Bincheng; He, Wenyan; Wang, Changjun; Wei, Ming
2018-04-01
Gemini-style protected-silver mirror (Sub / NiCrNx / Ag / NiCrNx / SiNx / Air) is a suitable choice for optical instruments requiring both long-term environmental durability and high broadband reflectance. Three Gemini-style protected-silver mirrors with NiCrNx interlayer thicknesses between 0.1 and 0.6 nm were prepared by magnetron sputtering, and the dependences of spectral properties and environmental durability of these protected-silver mirrors on the thickness of NiCrNx interlayer between the silver layer and SiNx layer were investigated in-depth. The reflectance, transmittance and total scattering loss measurements, optical microscope, and scanning electron microscope imaging were employed to characterize the spectral properties and surface morphology, and accelerated environmental tests, including humidity test and salt fog test, were applied to investigate the environmental durability. The experimental results showed that both optical and corrosion-resistant properties of protected-silver mirrors were NiCrNx interlayer thickness dependent, and an optimum NiCrNx interlayer thickness should be ˜0.3 nm for Gemini-style protected-silver mirrors to have reasonably both high reflectance in a broadband spectral range from visible to far infrared and good corrosion resistance for long-lifetime applications in harsh environments.
2010-11-10
... ENVIRONMENTAL PROTECTION AGENCY [FRL-9224-7] Workshop To Review Draft Materials for the Lead (Pb) Integrated Science Assessment (ISA) AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Workshop... (NAAQS) for Lead (Pb), EPA is announcing that a workshop to evaluate initial draft materials for the Pb...
Convention on the physical protection of nuclear material
International Nuclear Information System (INIS)
1991-09-01
The document refers to the Convention on the Physical Protection of Nuclear Material (IAEA-INFCIRC-274). Part I contains the status list as of September 6, 1991; Part II contains the texts of reservations/declarations made upon expressing consent to be bound; Part III contains the texts of reservations/declarations made upon signature
Resnik, David B.; MacDougall, D. Robert; Smith, Elise M.
2018-01-01
Various U.S. laws, such as the Clean Air Act and the Food Quality Protection Act, require additional protections for susceptible subpopulations who face greater environmental health risks. The main ethical rationale for providing these protections is to ensure that environmental health risks are distributed fairly. In this article, we (1) consider how several influential theories of justice deal with issues related to the distribution of environmental health risks; (2) show that these theories often fail to provide specific guidance concerning policy choices; and (3) argue that an approach to public decision making known as accountability for reasonableness can complement theories of justice in establishing acceptable environmental health risks for the general population and susceptible subpopulations. Since accountability for reasonableness focuses on the fairness of the decision-making process, not the outcome, it does not guarantee that susceptible subpopulations will receive a maximum level of protection, regardless of costs or other morally relevant considerations. PMID:29466133
Efficient prion disease transmission through common environmental materials.
Pritzkow, Sandra; Morales, Rodrigo; Lyon, Adam; Concha-Marambio, Luis; Urayama, Akihiko; Soto, Claudio
2018-03-02
Prion diseases are a group of fatal neurodegenerative diseases associated with a protein-based infectious agent, termed prion. Compelling evidence suggests that natural transmission of prion diseases is mediated by environmental contamination with infectious prions. We hypothesized that several natural and man-made materials, commonly found in the environments of wild and captive animals, can bind prions and may act as vectors for disease transmission. To test our hypothesis, we exposed surfaces composed of various common environmental materials ( i.e. wood, rocks, plastic, glass, cement, stainless steel, aluminum, and brass) to hamster-adapted 263K scrapie prions and studied their attachment and retention of infectivity in vitro and in vivo Our results indicated that these surfaces, with the sole exception of brass, efficiently bind, retain, and release prions. Prion replication was studied in vitro using the protein misfolding cyclic amplification technology, and infectivity of surface-bound prions was analyzed by intracerebrally challenging hamsters with contaminated implants. Our results revealed that virtually all prion-contaminated materials transmitted the disease at high rates. To investigate a more natural form of exposure to environmental contamination, we simply housed animals with large contaminated spheres made of the different materials under study. Strikingly, most of the hamsters developed classical clinical signs of prion disease and typical disease-associated brain changes. Our findings suggest that prion contamination of surfaces commonly present in the environment can be a source of disease transmission, thus expanding our understanding of the mechanisms for prion spreading in nature. © 2018 by The American Society for Biochemistry and Molecular Biology, Inc.
International Nuclear Information System (INIS)
1989-01-01
The eleven commemorative contributions give a short survey on the development of environmental parameters, the consequences of the reactor accident in Chernobyl, on radiation protection in nuclear medicine, lake shore analyses in Bavaria, nature protection planning, the application of data processing at the Land Office for Environment Protection (LfU), integrated disposal concepts for domestic refuse, special refuse disposal, implementation of the smog ordinance, environmental effects of shooting ranges and protection of waters against organic and inorganic pollutants as a part of water management outline planning. (DG) [de
The use of environmental impact assessment in protecting the built cultural heritage
DEFF Research Database (Denmark)
Flynn, Errol David
2004-01-01
This article examines the application of the environmental impact assessment as a means of protecting the built and cultural heritage during and after the construction of the new national opera house in the Holmen area of Copenhagen. It assesses the affect the new building has had...... on the surrounding built and cultural heritage and examines how the environmental impact assessment was used during the development process....
International Nuclear Information System (INIS)
Vaz, Solange dos Reis e; Andrade, Fernando de Menezes; Aleixo, Luiz Claudio Martins
2007-01-01
The heavy transportation in Brazil is generally done by highways. The radioactive material transportation follow this same rule. Whenever a radioactive material is carried by the road, by the sea or by the air, in some cases, a kind of combination of those transportation ways, the transport manager has to create a Transportation Plan and submit it to CNEN. Only after CNEN's approval, the transportation can be done. The plan must have the main action on Radiation Protection, giving responsibilities and showing all the directing that will be take. Although, the Brazilian's highways are not in good conditions, one could say that some of them are not good enough for any kind of transportation. But we are facing radioactive material use increase but the hospitals and industries, that the reason it's much more common that kind of transportation nowadays. So, because of that, a special attention by the governments must be provide to those activities. This paper goal is to show the real conditions of some important highways in Brazil in a radioactive protection's perspective and give some suggestions to adjust some of those roads to this new reality. (author)
Environmental stability study of holographic solar spectrum splitting materials
Chrysler, Benjamin D.; Ayala Pelaez, Silvana; Wu, Yuechen; Vorndran, Shelby D.; Kostuk, Raymond K.
2016-09-01
In this study the impact of outdoor temperature variations and solar illumination exposure on spectral filter material and holographic optical elements is examined. Although holographic components have been shown to be useful for solar spectrum splitting designs, relatively little quantitative data exist to demonstrate the extent to which these materials can withstand outdoor conditions. As researchers seek to investigate practical spectrum splitting designs, the environmental stability of holographic materials should be considered as an important factor. In the experiment presented, two holographic materials, Covestro Bayfol HX photopolymer and dichromated gelatin, and 3M reflective polymer filter materials are exposed to outdoor conditions for a period of several months. The environmental effect on absorption, spectral and angular bandwidth, peak efficiency, and Bragg matching conditions for the holograms are examined. Spectral bandwidth and transmittance of the 3M reflective filter material are also monitored. Holographic gratings are recorded, measured, and mounted on glass substrates and then sealed with a glass cover plate. The test samples are then mounted on a photovoltaic panel to simulate realistic temperature conditions and placed at an outdoor test facility in Tucson, Arizona. A duplicate set of holograms and 3M filter material is stored as a control group and periodically compared over the test period.
World Tourism Organization - 30 years of commitment to environmental protection
Energy Technology Data Exchange (ETDEWEB)
Shackleford, P.
1985-01-01
The paper traces 30 years of commitment to environmental values of tourism by the intergovernmental World Tourism Organization. Such commitment was almost unfashionable in the 1950s but gradually what began as an article of faith was vindicated by results of market research showing that the protection, enhancement and improvement of man's physical and human environment were among the fundamental requirements for the harmonious development of tourism. The establishment of the United Nations Environmental Program at last gave WTO a partner with the necessary authority with which the world body could walk towards mutually agreed goals.
World Tourism Organization - 30 years of commitment to environmental protection
Energy Technology Data Exchange (ETDEWEB)
Shackleford, P
1985-01-01
The paper traces 30 years of commitment to environmental values of tourism by the intergovernmental World Tourism Organization. Such commitment was almost unfashionable in the 1950s but gradually what began as an article of faith was vindicated by results of market research showing that the protection, enhancement and improvement of man's physical and human environment were among the fundamental requirements for the harmonious development of tourism. The establishment of the United Nations Environmental Program at last gave WTO a partner with the necessary authority with which the world body could walk towards mutually agreed goals.
Space Environmental Effects on Coated Tether Materials
Gittemeier, Keith A.; Hawk, Clark W.; Finckenor, Miria M.; Watts, Ed
2005-01-01
The University of Alabama in Huntsville s Propulsion Research Center has teamed with NASA's Marshall Space Flight Center (MSFC) to research the effects of atomic oxygen (AO) bombardment on coated tether materials. Tethers Unlimited Inc. has provided several candidate tether materials with various coatings for AO exposure in MSFC s Atomic Oxygen Beam Facility. Additional samples were exposed to ultraviolet (UV) radiation at MSFC. AO erodes most organic materials, and ultraviolet radiation embrittles polymers. This test series was performed to determine the effect of AO and UV on the mechanical integrity of tether materials that were treated with AO-protective coatings, such as polyhedral oligomeric silsesquioxane (POSS) or metallization. Both TUI's Multi-Application Survivable Tether (MAST) Experiment and Marshall Space Flight Center s Momentum Exchange Electrodynamic Reboost (MXER) programs will benefit from this research by helping to determine tether materials and coatings that give the longest life with the lowest mass penalty.
International Nuclear Information System (INIS)
Breuer, R.
1986-01-01
The author has the opinion that an extension of protection of individuals against environmental pollution is not desirable in the field of fundamental rights. The atomic energy and radiation protection law extends the protection of individuals even further than to warding off a danger. An extension is limited by the structure and complexity of modern environmental pollution. The existing system of individual protection generally is sufficient, the author objects esspecially against the action of an association. (CW) [de
International Nuclear Information System (INIS)
1990-01-01
The 'Environment Report 1990' describes the environmental situation in the Federal Republic of Germany; draws a balance of environmental policy measures taken and introduced; gives information on future fields of action in environmental policy. The 'Environment Report 1990' also deals with the 'Environment Expert Opinion 1987', produced by the board of experts on environmental questions. It contains surveys of the following sectors: Protection against hazardous materials air pollution abatement, water management, waste management, nature protection and preservation of the countryside, soil conservation, noise abatement, radiation protection, reactor safety. A separate part of the 'Environment Report 1990' deals with the progress made in 'interdisciplinary fields' (general law on the protection of the environment, instruments of environmental policy, environmental information and environmental research, transfrontier environmental policy). (orig./HP) [de
International Nuclear Information System (INIS)
Wilt, G.C.; Gallegos, G.M.; Tate, P.J.; Balke, B.K.
1994-01-01
Lawrence Livermore National Laboratory (LLNL), a US Department of Energy (DOE) facility operated by the University of California, serves as a national resource of scientific, technical, and engineering capability with a special focus on national security. Over the years, the Laboratory's mission has been broadened to encompass such areas as strategic defense, energy, the environment, biomedicine, the economy, and education. The Laboratory carries out this mission in compliance with local, state, and federal environmental regulatory requirements and takes measures to ensure that its operations do not adversely affect the environment or public health. It does so with the support of the Environmental Protection Department, which is responsible for environmental monitoring, environmental restoration, hazardous waste management, and ensuring environmental compliance. During 1993, the Environmental Protection Department conducted sampling of air, sewage effluent, ground water, surface water, soil, vegetation and foodstuffs, and took measurements of environmental radiation. It performed more than 190,000 analyses of environmental samples. The analytical results are summarized along with evaluations of the impact of radioactive and nonradioactive materials, a discussion of the effects of LLNL operations on the environment, and a summary of the activities undertaken to comply with local, state, and federal environmental laws
Energy Technology Data Exchange (ETDEWEB)
Wilt, G.C. [ed.; Gallegos, G.M.; Tate, P.J.; Balke, B.K. [and others
1994-09-01
Lawrence Livermore National Laboratory (LLNL), a US Department of Energy (DOE) facility operated by the University of California, serves as a national resource of scientific, technical, and engineering capability with a special focus on national security. Over the years, the Laboratory`s mission has been broadened to encompass such areas as strategic defense, energy, the environment, biomedicine, the economy, and education. The Laboratory carries out this mission in compliance with local, state, and federal environmental regulatory requirements and takes measures to ensure that its operations do not adversely affect the environment or public health. It does so with the support of the Environmental Protection Department, which is responsible for environmental monitoring, environmental restoration, hazardous waste management, and ensuring environmental compliance. During 1993, the Environmental Protection Department conducted sampling of air, sewage effluent, ground water, surface water, soil, vegetation and foodstuffs, and took measurements of environmental radiation. It performed more than 190,000 analyses of environmental samples. The analytical results are summarized along with evaluations of the impact of radioactive and nonradioactive materials, a discussion of the effects of LLNL operations on the environment, and a summary of the activities undertaken to comply with local, state, and federal environmental laws.
International Nuclear Information System (INIS)
Glass, W.A.
1982-02-01
This report describes research in environment, health, and safety conducted during fiscal year 1981. The five parts of the report are oriented to particular segments of the program. Parts 1 to 4 report on research performed for the DOE Office of Health and Environmental Research in the Office of Energy Research. Part 5 reports progress on all research performed for the Office of the Assistant Secretary for Environmental Protection, Safety and Emergency Preparedness. The parts are: Part 1: Biomedical Sciences under Program Manager, H. Drucker; Part 2: Ecological Sciences, under Program Manager, B.E. Vaughan; Part 3: Atmospheric Sciences under Program Manager, C.E. Elderkin; Part 4: Physical Sciences under Program Manager, J.M. Nielsen; and Part 5: Environmental and Occupational Protection, Assessment, and Engineering under Program Managers, D.L. Hessel, S. Marks, and W.A. Glass
International Nuclear Information System (INIS)
Krauze, M.
1994-01-01
The military problems connected with the probable use in warfare the chemical and nuclear weapon have been discussed. The concept of soldiers, civilians and environmental protection against the chemical and radiological contamination has been presented from the view point of military tactics
Nano materials for Energy and Environmental Applications
International Nuclear Information System (INIS)
Srinivasan, S.; Kannan, A.M.; Kothurkar, N.; Khalil, Y.; Kuravi, S.
2015-01-01
Nano materials enabled technologies have been seamlessly integrated into applications such as aviation and space, chemical industry, optics, solar hydrogen, fuel cell, batteries, sensors, power generation, aeronautic industry, building/construction industry, automotive engineering, consumer electronics, thermoelectric devices, pharmaceuticals, and cosmetic industry. Clean energy and environmental applications often demand the development of novel nano materials that can provide shortest reaction pathways for the enhancement of reaction kinetics. Understanding the physicochemical, structural, microstructural, surface, and interface properties of nano materials is vital for achieving the required efficiency, cycle life, and sustain ability in various technological applications. Nano materials with specific size and shape such as nano tubes, nano fibers/nano wires, nano cones, nano composites, nano rods, nano islands, nanoparticles, nanospheres, and nano shells to provide unique properties can be synthesized by tuning the process conditions.
Utilization of Self-Healing Materials in Thermal Protection System Applications
National Aeronautics and Space Administration — The proposed project is the Utilization of Self-Healing Materials for Thermal Protection System (TPS) Applications. Currently, the technology for repairing TPS from...
Recent developments in the field of environmental reference materials at the JRC Ispra.
Muntau, H
2001-06-01
The production of reference materials for environmental analysis started in the Joint Research Centre at Ispra/Italy in 1972 with the objective of later certification by the BCR, but for obvious budget reasons only a fraction of the total production achieved at Ispra ever reached certification level, although all materials were produced according to the severe quality requirements requested for certified reference materials. Therefore, the materials not destinated to certification are in growing demand as inter-laboratory test materials and as laboratory reference materials, for internal quality control, e.g., by control charts. The history of reference material production within the Joint Research Centre is briefly reviewed and the latest additions described. New developments such as micro-scale reference materials intended for analytical methods requiring sample intakes at milligram or sub-milligram level and therefor not finding supply on the reference material market, and "wet" environmental reference materials, which meet more precisely the "real-world" environmental analysis conditions, are presented and the state-of-the-art discussed.
International Nuclear Information System (INIS)
Hoepfner, K.A.
1993-01-01
The workshop puts much emphasis on the exchange of experience between experts from the West and from the Central and Eastern European countries. The representatives from the various countries and organisations are going to introduce their respective data banks, products, or services. The combination of papers and practical presentations will provide all with a qualified and comprehensive insight into the tried and tested as well as the new information management technologies in the specialist areas of nuclear safety, radiation protection, and environmental protection. Furthermore, it should also contribute to the promotion of the transfer of know-how between experts throughout the whole of Europe. (orig./DG)
Selected aspects of environmental protection in Poland
International Nuclear Information System (INIS)
Obarska-Pempkowaik, Hanna; Bolt, Adam
2001-01-01
Environmental deterioration in Poland particularly in 1970's, was a result of an incorrect investment policy and indifferent attitude to the principles of the preservation of nature. Water resources, as part of the environment were affected accordingly. Shortage in water resources is caused by deterioration activity of the industrial, the progressing urban development, overconsumption caused by low prices of water and low status the legislation connected with the natural environment. The European integration processes going on make it necessary to adapt the Polish standards and technological solutions in the sphere of the environmental protection to the standards required by the European Union. The destroyed natural environment cannot secure living at a relatively high standard. Hence the concept of ecological safety based on the conviction that there is no high quality J. life without a high quality of the surrounding environment' has more followers. The main purpose of this paper is to describe the nature and scope of water pollution in Poland with an emphasis on current threats to water quality, with achievements in last decade and background of other European countries. (Original)
Directory of Open Access Journals (Sweden)
Kenausis Kristin
2003-11-01
Full Text Available Abstract Background Melanoma incidence is rising at a rate faster than any other preventable cancer in the United States. Childhood exposure to ultraviolet (UV light increases risk for skin cancer as an adult, thus starting positive sun protection habits early may be key to reducing the incidence of this disease. Methods The Environmental Protection Agency's SunWise School Program, a national environmental and health education program for sun safety of children in primary and secondary schools (grades K-8, was evaluated with surveys administered to participating students and faculty. Results Pretests (n = 5,625 and posttests (n = 5,028 were completed by students in 102 schools in 42 states. Significant improvement was noted for the three knowledge variables. Intentions to play in the shade increased from 68% to 75%(p Conclusions Brief, standardized sun protection education can be efficiently interwoven into existing school curricula, and result in improvements in knowledge and positive intentions for sun protection.
International Nuclear Information System (INIS)
1980-07-01
The Fuels and Materials Examination Facility (FMEF) and the High Performance Fuel Laboratory (HPFL) were originally proposed to be constructed as separate facilities in the 400 Area of the Hanford Site near Richland, Washington. The environmental effects of these two facilities were described and evaluated in the FMEF Environmental Assessment and the HPFL Final Environmental Impact Statement, ERDA-1550. For economic reasons, the two facilities will no longer be built as separate facilities. The FMEF facility plans have been modified to incorporate some of the features of the proposed HPFL facility while retaining essentially all of the capabilities of the original FMEF proposal. The purpose of this document is to update the FMEF Environmental Assessment to appropriately reflect addition of certain HPFL features into the FMEF facility and to assess the environmental affects of the facility which resulted from inclusion of HPFL features into the FMEF facility
Bileisis, Mantas; Misiune, Ieva
2017-04-01
The impacts of human activity in the environment have a global dimension, but there are no effective global governance instruments to enforce environmental standards. At the same time, many national governments lack incentives to pursue strict environmental policies. In this context, self-regulation is seen as an alternative venue to address environmental challenges. This work aims to identify factors that influence companies to engage in environmental self-regulation? For this aim in March 2015 a survey of 482 companies was conducted. The target group were companies operating in Lithuania that hold ISO14001 certificates - one of the most prolific instruments for self-regulation. The questionnaire was designed to test assumptions developed in new institutionalist literature which claim that common practices can emerge through isomorphism.- The results showed that the main motive for environmental self-regulation is the desire to improve company image, rather than protecting the environment per se. Another important finding was that the main source of pressure to adopt self-regulation was based less on the perceived demands but the customers. Rather the driver for the adoption was a feeling of a need no to fall behind industry leaders. Thus, normative isomorphism is the main mechanism through which environmental self-regulation proliferates. We claim for a rapid proliferation of environmental self-regulation perceived industry leaders need to be identified and they need to be persuaded that environmental standards are key for the development of the industry. However, this also raises questions of sustainability. Few industries have long standing leaders, and through successful investment and technological development new actors can arise and this may risk stalling or even reversing self-regulation.
Physical protection of small amounts of nuclear material or contaminated parts
International Nuclear Information System (INIS)
Zipper, R.
2002-01-01
In July 2001 an incident was recognized where a worker occupied with decontamination of structures in a shut down reprocessing plant for spent fuel illegally removed a small amount of radioactive material from the facility site. The investigations exhibited that he brought this material to the apartment of his partner in life and she incorporated significantly α-activity in the form of plutonium. Immediately after the incident was discovered the supervisory authorities and the operating company of the facility took action to minimize the harms to third parties arising from the radioactive material released and to prevent a similar event to occur. As the overall inventory of radioactive material in the shut down facility at the time the theft occurred was below the limit where measures of physical protection are required by the German regulatory work discussions were raised on consequences to be drawn from this incident to close this obvious gap. The German Federal Ministry for Environment, Nature Protection and Reactor Safety (BMU) as the superior competent authority therefore ordered GRS to draft a set of fundamental requirements for future rules to make a repetition of the initiating incident unlikely. Further discussions of the authorities involved on supplementary rules and guidelines aiming to better protect small amounts of radioactive material from being illegally removed out of nuclear facilities and laboratories are based on these fundamentals defined by GRS but not yet finished. (orig.)
Zhu, Dongming
2018-01-01
Ceramic materials play increasingly important roles in aerospace applications because ceramics have unique properties, including high temperature capability, high stiffness and strengths, excellent oxidation and corrosion resistance. Ceramic materials also generally have lower densities as compared to metallic materials, making them excellent candidates for light-weight hot-section components of aircraft turbine engines, rocket exhaust nozzles, and thermal protection systems for space vehicles when they are being used for high-temperature and ultra-high temperature ceramics applications. Ceramic matrix composites (CMCs), including non-oxide and oxide CMCs, are also recently being incorporated in gas turbine engines for high pressure and high temperature section components and exhaust nozzles. However, the complexity and variability of aerospace ceramic processing methods, compositions and microstructures, the relatively low fracture toughness of the ceramic materials, still remain the challenging factors for ceramic component design, validation, life prediction, and thus broader applications. This ceramic material section paper presents an overview of aerospace ceramic materials and their characteristics. A particular emphasis has been placed on high technology level (TRL) enabling ceramic systems, that is, turbine engine thermal and environmental barrier coating systems and non-oxide type SiC/SiC CMCs. The current status and future trend of thermal and environmental barrier coatings and SiC/SiC CMC development and applications are described.
Environmental protection and nuclear energy. 4. ed.
International Nuclear Information System (INIS)
1990-01-01
The present energy supply has to be reconsidered based on the continous increase of CO 2 -concentration in the air. For this, questions on environmental protection, nuclear energy, safety of usable plants and estimation of technical subsequences serve for contributions to a discussion as a result of the consideration, 10 theses on an ethic of energy technology have been elaborated. The Union of Catholic Employers is considered that the improved reactor technology has a new chance in our country. The minimization of risks and damages of this technology has proceeded in a way that it can be shared with regard to Christian responsibility. (orig./DG) [de
International Nuclear Information System (INIS)
Tadmor, J.
1980-01-01
Comparison of the radiation protection standards, for the population at large, with the conventional pollutants ambient standards, reveals differences in basic principles which result in more relaxed ambient standards for conventional pollutants and consequently, the penalization of the nuclear industry, due to the increased cost of its safety measures. It is proposed that radiation protection principles should be used as a prototype for pollutants having harmful environmental effects and that radiation health physicists should be active in the application of these principles of population protection. A case study of atmospheric release of SO 2 , under different conditions, is analyzed, to emphasize the importance of consideration of the size of the exposed population. (H.K.)
Gayford, Christopher
1984-01-01
Discusses types of students and materials and resources used in O- and A-level environmental studies and environmental science courses. Indicates that these subjects are very susceptable to the attitudes of teachers (as shown by their willingness to produce satisfactory materials) and by the motivation of students. (JN)
Environmental protection and fight against poverty
International Nuclear Information System (INIS)
Preston, L.T.
1992-01-01
Effective global environmental protection can be achieved only when industrialized countries provide developing nations with 'clean' energy technological know-how along with the necessary financial assistance necessary for its application. The World Bank is directly involved in actuating this exchange. The main directions currently being taken by the World Bank in order to meet the difficulties of developing countries struggling, with limited financial and technological resources, to sustain growing populations, are: to ensure that these countries develop systems for adequate water supplies; to sponsor research for the development of better agricultural techniques; to encourage industrialized countries to practice energy conservation so as to alleviate pressure on the world's energy resources; to sponsor wide-scale re- forestation; and to help third world countries put greater emphasis on family planning, health and education programs
Environmental protection and fight against poverty
Energy Technology Data Exchange (ETDEWEB)
Preston, L T [World Bank, Washington, DC (USA)
1992-10-01
Effective global environmental protection can be achieved only when industrialized countries provide developing nations with 'clean' energy technological know-how along with the necessary financial assistance necessary for its application. The World Bank is directly involved in actuating this exchange. The main directions currently being taken by the World Bank in order to meet the difficulties of developing countries struggling, with limited financial and technological resources, to sustain growing populations, are: to ensure that these countries develop systems for adequate water supplies; to sponsor research for the development of better agricultural techniques; to encourage industrialized countries to practice energy conservation so as to alleviate pressure on the world's energy resources; to sponsor wide-scale re- forestation; and to help third world countries put greater emphasis on family planning, health and education programs.
Operations report 1985 of the Department of Safety and Radiation Protection
International Nuclear Information System (INIS)
Hille, R.; Frenkler, K.L.
1986-04-01
Under the heading 'Licensing' the report deals with licensing procedures and the handling of nuclear-fuels and radioactive materials. Operational radiation protection is concerned with operational and personnel monitoring, mathematical methods and safety analyses. Environmental protection deals with emission control, immission monitoring and meteorological measurements, and safety technology with α/β-analysis, dosimetry, equipment servicing and mechanics, nuclear material safeguards. Other subdepartments take care of industrial safety, physical protection, emergency protection and training. Subjects dealt with, too, are dispersion pollutants in atmosphere and environment, further development of radiation protection methods, and the bibliography of radiation protection in KFA. (HK) [de
International Nuclear Information System (INIS)
Andersen, Peter A.; Buller, David B.; Walkosz, Barbara J.; Scott, Michael D.; Beck, Larry; Liu, Xia; Abbott, Allison; Eye, Rachel
2016-01-01
Background: Vacationing at sunny, warm weather locations is a risk factor for excessive solar ultraviolet (UV) radiation exposure and skin cancer. Objectives: This study examined the association of environmental variables related to UV levels with vacationers' sun protection. Methods: Vacationers at 41 summer resorts in 17 states and 1 Canadian Province were interviewed (n=3531) and observed (N=4347) during 2012 and 2013. Clothing coverage, sunglasses, and shade use were observed. Use of sunscreen and sunburns were self-reported. Environmental information was recorded by research staff or acquired from ground stations and the weather service. Results: Temperature was positively associated with sun protection behaviors; however clothing coverage was negatively associated with temperature. Cloud cover was negatively associated with sun protection, with the exception of clothing coverage which was positively associated with it. Elevation showed a mixed pattern of associations with vacationer's sun protection. Latitude of a resort was negatively associated with most sun protection behaviors, such that sun protection increased at more southerly resorts. Similarly, the farther south a vacationer traveled to the resort, the less sun protection they employed. The UV index showed a weak, positive relationship with some sun protection behaviors even when controlling for temperature. Conclusions: Vacationers appeared aware that UV is higher at southern latitudes and may learn UV is intense when living in southern regions. However, many used temperature, an unreliable cue, to judge UV intensity and seemed to adjust clothing for warmth not UV protection. Efforts are needed to help individuals make more accurate sun safety decisions. - Highlights: • Vacationers poorly monitor and protect against environmental ultraviolet radiation (UVR). • On cloudy days vacationers fail to protect against UVR. • Temperature is erroneously used by vacationers as a marker for UVR
Energy Technology Data Exchange (ETDEWEB)
Andersen, Peter A., E-mail: westone47@gmail.com [School of Communication, San Diego State University, 5500 Campanile Drive, San Diego, CA 92182 (United States); Buller, David B.; Walkosz, Barbara J. [Klein Buendel, Inc., 1667 Cole Boulevard, Suite 225, Golden, CO 80401 (United States); Scott, Michael D. [Mikonics, Inc., 40 B Old Road South, Santa Fe, NM 87540 (United States); Beck, Larry [L. Robert Payne School of Hospitality and Tourism Management, San Diego State University, Room PSFA 445, San Diego, CA 92182 (United States); Liu, Xia [Klein Buendel, Inc., 1667 Cole Boulevard, Suite 225, Golden, CO 80401 (United States); Abbott, Allison [School of Communication, San Diego State University, 5500 Campanile Drive, San Diego, CA 92182 (United States); Eye, Rachel [Klein Buendel, Inc., 1667 Cole Boulevard, Suite 225, Golden, CO 80401 (United States)
2016-04-15
Background: Vacationing at sunny, warm weather locations is a risk factor for excessive solar ultraviolet (UV) radiation exposure and skin cancer. Objectives: This study examined the association of environmental variables related to UV levels with vacationers' sun protection. Methods: Vacationers at 41 summer resorts in 17 states and 1 Canadian Province were interviewed (n=3531) and observed (N=4347) during 2012 and 2013. Clothing coverage, sunglasses, and shade use were observed. Use of sunscreen and sunburns were self-reported. Environmental information was recorded by research staff or acquired from ground stations and the weather service. Results: Temperature was positively associated with sun protection behaviors; however clothing coverage was negatively associated with temperature. Cloud cover was negatively associated with sun protection, with the exception of clothing coverage which was positively associated with it. Elevation showed a mixed pattern of associations with vacationer's sun protection. Latitude of a resort was negatively associated with most sun protection behaviors, such that sun protection increased at more southerly resorts. Similarly, the farther south a vacationer traveled to the resort, the less sun protection they employed. The UV index showed a weak, positive relationship with some sun protection behaviors even when controlling for temperature. Conclusions: Vacationers appeared aware that UV is higher at southern latitudes and may learn UV is intense when living in southern regions. However, many used temperature, an unreliable cue, to judge UV intensity and seemed to adjust clothing for warmth not UV protection. Efforts are needed to help individuals make more accurate sun safety decisions. - Highlights: • Vacationers poorly monitor and protect against environmental ultraviolet radiation (UVR). • On cloudy days vacationers fail to protect against UVR. • Temperature is erroneously used by vacationers as a marker for UVR
U.S. Environmental Protection Agency — Each year EPA produces a report called Advancing Sustainable Materials Management: Facts and Figures. It includes information on municipal solid waste (MSW)...
International Nuclear Information System (INIS)
Fishbone, L.G.
1999-01-01
While substantial work has been performed in the Russian MPC and A Program, much more needs to be done at Russian nuclear facilities to complete four necessary steps. These are (1) periodically measuring the physical inventory of nuclear material, (2) continuously measuring the flows of nuclear material, (3) using the results to close the material balance, particularly at bulk processing facilities, and (4) statistically evaluating any apparent loss of nuclear material. The periodic closing of material balances provides an objective test of the facility's system of nuclear material protection, control and accounting. The statistical evaluation using the uncertainties associated with individual measurement systems involved in the calculation of the material balance provides a fair standard for concluding whether the apparent loss of nuclear material means a diversion or whether the facility's accounting system needs improvement. In particular, if unattractive flow material at a facility is not measured well, the accounting system cannot readily detect the loss of attractive material if the latter substantially derives from the former
A state of the art on coastal environmental protection using radioisotope tracer technology
Jung, S H; Jin, J H; Kim, J B
2002-01-01
Construction of artificial structures has caused a sediment process change due to the variation of hydraulic condition in Korea. Subsequently we have a serious problem of shoaling for shoreline deformation, siltation of the harbor and shipping channel. To protect those abnormal environmental changes, a large estimate has been spent for additional construction such as outer wall facilities, littoral nourishment and dredging. Systematic long-term studies should be carried out to understand the causes of environmental change. In addition, comprehensive plan is required for its monitoring and prevention. The radioisotope application studies for coastal environmental protection have not been actively performed only in the developed countries like France, Canada, and Australia etc., but also in many developing countries like Poland, India. Since KAERI has performed two experiments in costal area of Korea in 1960s, no more study has been reported. Recently the studies of radiotracer application technology is getting...
International Nuclear Information System (INIS)
1978-03-01
The guidelines are based on recommendations in the IAEA's ''Physical Protection of Nuclear Material,'' INFCIRC/225/rev.1. In accordance with practice in other countries, the guidelines give more detailed requirements for the protection of reactor plants than those given in the IAEA's present recommendations, which put more emphasis on the protection of nuclear materials. The measures to be taken for nuclear plants, or nuclear transports, are proposed made to fit the potential risk that the more closely defined actions imply. It is suggested that the more detailed rules for the scope of the protection of plants or materials should be laid down by the National Agency on the basis of recommendations made by the Inspectorate of Nuclear Installations, which in turn are based on the safety documentation of the plant/material owners. It is further proposed that the National Agency, again on a recommendation from the Inspectorate, should lay down more detailed guidelines for the reporting of changes in stocks or transports of nuclear materials. (author)
Environment: renewable energy, environmental protection and energy efficiency
International Nuclear Information System (INIS)
1998-01-01
The second in the series of IPPSO policy papers for discussion deals with the place of renewable energy sources and environmental protection in relation to the soon-to-be deregulated electricity industry in Ontario. The paper provides a broad statement of principles, defines the issues, identifies the problems, and discusses the various options under consideration. Some of the more important design questions regarding a renewable portfolio standard were discussed, among them the technologies to be included, the treatment of existing generators and expansions, establishment of minimum amounts and targets, responsibility for and means of compliance, compensation for the intermittent nature of some of the renewable resources, mandatory disclosure and labelling, development by the IMO of environmental dispatch protocols, research and development funding for renewable energy technologies, emission caps with tradeable targets, and concerns about the operation of a system benefits fund for energy efficiency. 5 refs
Overview of environmental materials degradation in light-water reactors
International Nuclear Information System (INIS)
Shaaban, H.I.; Wu, P.
1986-08-01
This report provides a brief overview of analyses and conclusions reported in published literature regarding environmentally induced degradation of materials in operating light-water reactors. It is intended to provide a synopsis of subjects of concern rather than to address a licensing basis for any newly discovered problems related to reactor materials
Environmental radiation protection-future challenges with regard to science and decision-making
International Nuclear Information System (INIS)
Larsson, C. M.
2004-01-01
With Publication 91 on the impact of ionizing radiation on non-human species, the International Commission on Radiological Protection (ICRP) has taken a major step towards the integration of environmental issues into radiological protection. The conceptual framework has developed in response to public demand and concern for environmental issues, and is underpinned by technical development undertaken by several organisations at both national and international levels. The EC-funded FASSET project (Framework for Assessment of Environmental Impact), completed in 2004, has developed an assessment framework that includes: source characterisation and initial hazard analysis; ecosystem description and selection of reference organisms; exposure analysis including conversion to dose rates; effects analysis; and, guidance for interpretation. On the basis of experience from FASSET and other recent developments, it can be concluded that (i) there is substantial agreement in terms of conceptual approaches between different frameworks currently in use being or proposed, and that (ii) differences in technical approaches can be largely attributed to differences in ecosystems of concern or in national regulatory requirements. A major future challenge is the development of an integrated approach where decision-making can be guided by sound scientific judgements. This requires, inter alia: filling gaps in basic knowledge of relevance to assessment and protection, through targeted experimental, theoretical (including expert judgements) and real case studies; development of risk characterisation methodologies; development of screening standards, where appropriate; development of user-friendly assessment tools; and, stakeholder involvement, including the development of supporting communication strategies. These issues will be addressed in the ERICA project (Environmental Risks from Ionizing Contaminants Assessment and Management) launched under the EC 6th Framework Programme during the
International Nuclear Information System (INIS)
Syahrir
2007-01-01
Indonesia plans to operate the first nuclear power plant (NPP) by 2016. A radiation and environmental protection arrangement for NPPs is part of the whole safety system which is embedded in every practice involved radiation exposure to workers and members of public. A radiation and environmental protection programme for the NPP should adhere to international standards and mainstream in order to be acceptable to the public and international communities. International Atomic Energy Agency (IAEA) has recommended a radiation protection standard for NPPs as studied in this paper. Focus is given to the operational aspects of radiation protection program and discharge control to the environment. Some documents related to Safety Analysis Reports were used as working examples on its implementation. The study includes the classification of working areas and access control; local rules and supervision of work; work planning and work permits; protective clothing and protective equipment; facilities, shielding and equipment; application of the principle of optimization of protection; and removal or reduction in intensity of sources of radiation. The radiological protection aspects blend together in the whole NPP practices, each individual has his/her own responsibility in association with the radiation protection program implementation. It also present in the whole steps of NPP preparation up to its decommissioning. Promise on safety improvement and significant dose reduction in the recent development in NPP technology should scrutinized so that the option of proven technology as required in commercial power reactor licensing considers this tendency. (author)
Environmental effect of structural solutions and building materials to a building
International Nuclear Information System (INIS)
Haapio, Appu; Viitaniemi, Pertti
2008-01-01
The field of building environmental assessment tools has become a popular research area over the past decade. However, how the service life of a building affects the results of the environmental assessment of a building has not been emphasised previously. The aim of this study is to analyse how different structural solutions and building materials affect the results of the environmental assessment of a whole building over the building's life cycle. Furthermore, how the length of the building's service life affects the results is analysed. The environmental assessments of 78 single-family houses were calculated for this study. The buildings have different wall insulations, claddings, window frames, and roof materials, and the length of the service life varies from 60 years up to 160 years. The current situation and the future of the environmental assessment of buildings are discussed. In addition, topics for further research are suggested; for example, how workmanship affects the service life and the environmental impact of a building should be studied
Physical protection of facilities and special nuclear materials in france
International Nuclear Information System (INIS)
Jeanpierre, G.
1980-01-01
Physical protection of nuclear facilities and special nuclear materials is subject in France to a national governmental regulation which provides for the basic principles to be taken into account and the minimal level of protection deemed necessary. But the responsibility of implementation is left to the facility management and the resulting decentralization allows for maximum efficiency. All safeguards measures comply with the commitments taken at the international level by the French government
Trend of environmental radiation protection and its current related studies
International Nuclear Information System (INIS)
Yoshida, Satoshi
2011-01-01
Reviewed are the international trend of environmental radiation protection (ERP), Japanese studies of radiation effects on environmental livings from aspects of ecosystem to molecular level, and the future view. ERP is particularly closed up toward promotion after its first involvement in the general global conference, UN Conference on Environment and Development (1992). International Commission of Radiological Protection (ICRP) has conducted such actions for the environment as establishing protection essentials for non-human species (2003), organizing Committee 5 (2005), and defining Reference Animals and Plants (2008) where Derived Consideration Reference Levels of 0.1-100 mGy/d are proposed, together with cooperative actions by United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR), International Atomic Energy Agency (IAEA), The Organization for Economic Co-operation and Development (OECD)/Nuclear Energy Agency (NEA) and European projects. Japanese NIRS is now enrolled in the project of Environmental Modeling for Radiation Safety-II (IAEA). Major Japanese studies of radiation effects on environmental livings have utilized killifish (medaka: Oryzias latipes), springtail, earthworm, nematode, cultured plant cell (cedar), poplar, etc. Studies of the radiation effect on microcosm consisting of 3 livings have led to establishing a model for mathematical analysis and of 8 livings, have defined 50% affect dose of 5600 Gy gamma-ray. Irradiation of gamma-ray at 1 Gy/d for 5-10 days to the soil has been shown to result in alteration of the composition of natural earth bacterial population by denaturant gradient gel electrophoresis, which being a promising tool for evaluating the alteration of soil composition and function. At molecular levels, transcriptome analysis of various cells from yeast to man, is performed after irradiation of gamma-ray, neutron, heavy particles and others to reveal radiation-induced gene expression; and Hi-CEP (high
40 CFR 5.455 - Textbooks and curricular material.
2010-07-01
... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Textbooks and curricular material. 5.455 Section 5.455 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL NONDISCRIMINATION ON THE BASIS OF SEX IN EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Discrimination on the Basis of Sex in Education...
REFLECTIONS ON ROMANIA'S ENVIRONMENTAL PROTECTION IN THE CONTEXT OF SUSTAINABLE DEVELOPMENT
Directory of Open Access Journals (Sweden)
PAUL-BOGDAN ZAMFIR
2013-02-01
Full Text Available The destructive impact of antropic activities can no longer be ignored and all the human activities – from industry to domestic household - must impose a friendly behavior in relation to the environment. The environmental protection is an esential part of the enlarged reproduction and modern economic growth, aiming to ensure the dinamic ecological equilibrium, preserving and improving the quality of natural factors, the development of country's natural riches, ensuring better conditions of life and work for present and future generations. Thus, the whole activity for environmental protection in all of its components has a productive beeing creative of net income and value. On the long term, the achievement of dynamic economic equilibrium is illusory, without observing and respecting of ecological balance, the economic imbalances will cannot be resolved on the basis of creating some ecological imbalances, because these latter generate huge economic damage, a to which we can add a series of consequences, most often unpredictable.
Food and environmental protection newsletter. Vol. 11, No. 2, July 2008
International Nuclear Information System (INIS)
2008-07-01
The Food and Environmental Protection Section of the Joint FAO/IAEA Division and the Agrochemicals Unit of the FAO/IAEA Agriculture and Biotechnology Laboratory implements the food and environmental safety subprogramme that provides assistance in four main areas, namely, coordinating and supporting research, providing technical and advisory services, providing laboratory support and training, and collecting, analyzing and disseminating information, primarily in areas related to the use of ionizing radiation, pesticide and veterinary drug residues, and radioactive contamination of foodstuffs. Many of our subprogramme activities are undertaken in collaboration with other international bodies, such as the Joint FAO/WHO Codex Alimentarius Commission, by providing direct support in their efforts to enhance food quality and safety, protect consumers and promote trade in food and agricultural products. This assistance is primarily directed to the Codex Committee on Contaminants in Foods, the Codex Committee on Pesticide Residues and the Codex Committee on Residues of Veterinary Drugs in Foods
DEFF Research Database (Denmark)
Corona, Andrea; Markussen, Christen Malte; Birkved, Morten
2015-01-01
and flax/carbon, flax/glass mixed fibres) are compared in terms of environmental sustainability. Applying one of the most recent life cycle impact assessment methods, we demonstrate that the environmental sustainability of natural fibre based composite materials is similar or even lower, within certain...... turbines have therefore partially been focused on substitution of conventional fibre materials with bio-fibres assuming that this substitution was in the better for the environment and human health. The major question is if this material substitution, taking into account a multitude of environmental impact...... reinforcement materials. Since the environmental burden of the resin in addition is comparable to that of the fibres (especially in terms human health related impacts), the higher resin demand counterbalances the environmental sustainability improvements, obtained with the application of natural fibres....
Barta, Daniel J.; Lange, Kevin; Anderson, Molly; Vonau, Walter
2016-07-01
Planetary protection represents an additional set of requirements that generally have not been considered by developers of technologies for Environmental Control and Life Support Systems (ECLSS). Forward contamination concerns will affect release of gases and discharge of liquids and solids, including what may be left behind after planetary vehicles are abandoned upon return to Earth. A crew of four using a state of the art ECLSS could generate as much as 4.3 metric tons of gaseous, liquid and solid wastes and trash during a 500-day surface stay. These may present issues and concerns for both planetary protection and planetary science. Certainly, further closure of ECLSS systems will be of benefit by greater reuse of consumable products and reduced generation of waste products. It can be presumed that planetary protection will affect technology development by constraining how technologies can operate: limiting or prohibiting certain kinds of operations or processes (e.g. venting); necessitating that other kinds of operations be performed (e.g. sterilization; filtration of vent lines); prohibiting what can be brought on a mission (e.g. extremophiles); creating needs for new capabilities/ technologies (e.g. containment). Although any planned venting could include filtration to eliminate micro-organisms from inadvertently exiting the spacecraft, it may be impossible to eliminate or filter habitat structural leakage. Filtration will add pressure drops impacting size of lines and ducts, affect fan size and energy requirements, and add consumable mass. Technologies that may be employed to remove biomarkers and microbial contamination from liquid and solid wastes prior to storage or release may include mineralization technologies such as incineration, super critical wet oxidation and pyrolysis. These technologies, however, come with significant penalties for mass, power and consumables. This paper will estimate the nature and amounts of materials generated during Mars
International Nuclear Information System (INIS)
Morris, S.C.; Rowe, M.D.; Holtzman, S.; Meinhold, A.F.
1992-11-01
The Environmental Protection Agency (EPA) has proposed regulations for allowable levels of radioactive material in drinking water (40 CFR Part 141, 56 FR 33050, July 18, 1991). This review examined the assumptions and methods used by EPA in calculating risks that would be avoided by implementing the proposed Maximum Contaminant Levels for uranium, radium, and radon. Proposed limits on gross alpha and beta-gamma emitters were not included in this review
Environmental Management in Danish transnational textile product chains
DEFF Research Database (Denmark)
Jørgensen, Michael Søgaard; Jørgensen, Ulrik; Hendriksen, Kåre
2010-01-01
on capacity building at the suppliers in developing countries, while other companies seem to focus the complex activities at domestic suppliers. Two new facilitating actors in environmental management in product chains were identified. Research limitations and implications The focus on one sector in one......Purpose The purpose is to analyse environmental responsibility of companies from industrialized countries when they source materials and products in countries with less environmental protection. Methodology The article is a study of corporate environmental management in the Danish textile...... have a practice without environmental initiatives. Dominating types of initiatives are cleaner technology, environmental management systems and cleaner products. Driving forces are governmental regulation, customer demands, market expectations and protection of corporate brands. Some companies focus...
Environmental Protection Department's well inventory (through the second quarter of 1993)
International Nuclear Information System (INIS)
1993-09-01
This report is an inventory of the wells recorded in Environmental Protection Department/Environmental Monitoring Section (EPD/EMS) documents since the startup of the Savannah River Site (SRS) and includes wells monitored by special request and SRS research wells. The purpose of this report is as follows: to provide a historical record of the wells that EPD/EMS has monitored; to provide a document containing a list of wells that are currently in the EPD/EMS Groundwater Monitoring Program; to provide pertinent information about all wells listed in EPD/EMS documents
Characterization of Candidate Solar Sail Material Exposed to Space Environmental Effects
Edwards, David; Hovater, Mary; Hubbs, Whitney; Wertz, George; Hollerman, William; Gray, Perry
2003-01-01
Solar sailing is a unique form of propulsion where a spacecraft gains momentum from incident photons. Solar sails are not limited by reaction mass and provide continual acceleration, reduced only by the lifetime of the lightweight film in the space environment and the distance to the Sun. Once thought to be difficult or impossible, solar sailing has come out of science fiction and into the realm of possibility. Any spacecraft using this method would need to deploy a thin sail that could be as large as many kilometers in extent. The availability of strong, ultra lightweight, and radiation resistant materials will determine the future of solar sailing. The National Aeronautics and Space Administration's Marshall Space Flight Center (MSFC) is concentrating research into the utilization of ultra lightweight materials for spacecraft propulsion. The Space Environmental Effects Team at MSFC is actively characterizing candidate solar sail material to evaluate the thermo-optical and mechanical properties after exposure to space environmental effects. This paper will describe the exposure of candidate solar sail materials to emulated space environmental effects including energetic electrons, combined electrons and Ultraviolet radiation, and hypervelocity impact of irradiated solar sail material. This paper will describe the testing procedure and the material characterization results of this investigation.
Energy Technology Data Exchange (ETDEWEB)
Birkved, M.; Corona, A. [Technical Univ. of Denmark. DTU Management Engineering, Kgs. Lyngby (Denmark); Markussen, C.M.; Madsen, Bo [Technical Univ. of Denmark. DTU Wind Energy, Risoe Campus, Roskilde (Denmark)
2013-09-01
Over the recent decades biomaterials have been marketed successfully supported by the common perception that biomaterials and environmental sustainability de facto represents two sides of the same coin. The development of sustainable composite materials such as blades for small-scale wind turbines have thus partially been focused on the substitution of conventional fiber materials with bio-fibers. The major question is if this material substitution actually, is environmental sustainable. In order to assess a wide pallet of environmental impacts and taking into account positive and negative environmental trade-offs over the entire life-span of composite materials, life cycle assessment (LCA) can be applied. In the present case study, four different types of fibers (carbon, glass, flax and carbon/flax mixture) are compared in terms of environmental sustainability and cost. Applying one of the most recent life cycle impact assessment methods, it is demonstrated that the environmental sustainability of the mixed carbon/flax fiber based composite material is better than that of the flax fibers alone. This observation may be contra-intuitive, but is mainly caused by the fact that the bio-material resin demand is by far exceeding the resin demand of the conventional fibers, and since the environmental burden of the resin is comparable to that of the fibers, resin demand is in terms of environmental sustainability important. On the other hand is the energy demand and associated environmental impacts in relation to the production of the carbon and glass fibers considerable compared to the impacts resulting from resin production. The ideal fiber solution, in terms of environmental sustainability, is hence the fiber composition having the lowest resin demand and lowest overall energy demand. The optimum environmental solution hence turns out to be a 70:30 flax:carbon mix, thereby minimizing the use of carbon fibers and resin. On top of the environmental sustainability
International Nuclear Information System (INIS)
1996-05-01
The present report presently contains over 250 reference materials with trace element and organic contaminant information on fuel, geological and mineral, anthropogenic disposal, soil reference and miscellaneous reference materials. Not included in the current report is information on most biological and environmental reference materials with trace element, stable isotope, radioisotope and organic contaminant information. 8 refs, tabs
Nuclear energy, environmental protection and international conflicts
International Nuclear Information System (INIS)
Menke-Glueckert, P.
1975-01-01
Some general and some critical remarks on: nuclear energy as an image for politics; nuclear energy as a model for research planning; nuclear controversy; the principle of precaution in nuclear and radiation protection law; reactor safety on probation; advantages and economy of nuclear energy; communication difficulties; the special role of nuclear energy; the need for European site planning; supervision of fissionable materials; the world's energy household in danger; global structure politics and nuclear energy; nuclear energy with a capacity for social innovations. (HP/LN) [de
Electrospun nanofibers for energy and environmental applications
Energy Technology Data Exchange (ETDEWEB)
Ding, Bin; Yu, Jianyong (eds.) [Donghua Univ., Shanghai (China). State Key Lab. for Modification of Chemical Fibers and Polymer Materials; Donghua Univ., Shanghai (China). Nanomaterials Research Center
2014-10-01
This book offers a comprehensive review of the latest advances in developing functional electrospun nanofibers for energy and environmental applications, which include fuel cells, lithium-ion batteries, solar cells, supercapacitors, energy storage materials, sensors, filtration materials, protective clothing, catalysis, structurally-colored fibers, oil spill cleanup, self-cleaning materials, adsorbents, and electromagnetic shielding.
Ethics and data protection in human biomarker studies in environmental health.
Casteleyn, Ludwine; Dumez, Birgit; Van Damme, Karel; Anwar, Wagida A
2013-08-01
Human biomarker studies in environmental health are essential tools to study the relationship between health and environment. They should ultimately contribute to a better understanding of environmentally induced adverse health effects and to appropriate preventive actions. To ensure the protection of the rights and dignity of study participants a complex legal and ethical framework is applied, consisting of several international directives, conventions, and guidelines, whether or not translated in domestic laws. Main characteristics of ethics and data protection in studies using biomarkers in the field of environmental health are summarized and current discussions on related questions and bottlenecks highlighted. In the current regulatory context, dominated by the protection of the individual study participant, difficulties are reported due to the different interpretation and implementation of the regulations of concern within and across borders. Advancement of consistency and compatibility is recommended and efforts are ongoing. An increasing demand for secondary use of data and samples poses additional challenges in finding a right balance between the individual rights of the study participants on the one hand and the common interest of, and potential benefit for the public or community at large on the other. Ethics committees could play a key role in assessing problems originating from the sometimes competing needs at individual and societal level. Building trust in science amongst (potential) study participants and within the community allows the inclusion of arguments from the societal perspective. This requires increased attention for respectful communication efforts. Striving for public participation in decision making processes may promote policy relevant research and the related translation of study results into action. Copyright © 2013 Elsevier GmbH. All rights reserved.
The U.S. Environmental Protection Agency’s (U.S. EPA) mission is to protect human health and the environment. Those not familiar with U.S. EPA’s mission often do not realize that U.S. EPA is a public health agency. In this presentation, Dr. Danelle Lobdell will provid...
International Nuclear Information System (INIS)
1997-09-01
The Physical Protection of Nuclear Material, INFCIRC/225/Rev.3, provides recommendations for the physical protection of nuclear material against theft in use, storage and transport, whether national or international and whether peaceful or military, and contains provisions relating to the sabotage of nuclear material or facilities. The recommendations contained in INFCIRC/225/Rev.3 detail the elements that should be included in a State's system of physical protection. It also recognizes the adverse health and safety consequences arising from the theft of nuclear material and the sabotage of nuclear material or facilities. Most industrial and developing countries use these recommendations to some extent in the establishment and operation of their physical protection systems. Although INFCIRC/225/Rev.3 provides recommendations for protecting materials and facilities from theft or sabotage, it does not provide in-depth details for these recommendations. In June 1996, the IAEA convened a consultants meeting to consider this matter. This report is the result of continuing discussions and drafts over a period of nine months. The intent of this guidance is to provide a broader basis for relevant State organizations to prescribe appropriate requirements for the use of nuclear materials which are compatible with accepted international practice
Auxiliaries for the textile industry and environmental protection
Directory of Open Access Journals (Sweden)
Sanda VISAN
2010-06-01
Full Text Available The textile industry is an industrial field that affects the environment, from the plant growth until the production process. The obtaining of environmental licence for Romanian companies that produce textile products is related to elaboration and implementation of a modern system for an environmental management, that consist in utilization of ecological technologies for finishing, in diminution the water and energy consumption, cleaning of waste waters, reutilization of cleaned waters, sustainable management of wastes. In this study, the surfactant categories used in the textile industry that fulfil the conditions of environment protection, are presented. Some exemplifications were made involving the existing surfactants in Romanian textile industry, obtained from both domestic and external production. Also, some recommendation are suggested regarding the utilization of surfactants manufactured from either vegetal oils or chemical/petrochemical wastes, with similar properties as those from import having decreased prices an that affect as small as possible the environment.
Physical protection of radioactive materials in a University Research Institute
International Nuclear Information System (INIS)
Boeck, H.
1998-01-01
Although nuclear research centers attached to universities usually do not keep large inventories of radioactive or special nuclear material, the mentioned material has still to be under strict surveillance and safeguards if applicable. One problem in such research centers is the large and frequent fluctuation of persons - mainly students, scientists or visiting guest scientists - using such materials for basic or applied research. In the present paper an overview of protective actions in such a research institute will be given and experience of more than 36 years will be presented. (author)
Convention on the physical protection of nuclear material
International Nuclear Information System (INIS)
1990-08-01
The document refers to the Convention on the Physical Protection of Nuclear Material (INFCIRC/274). Part I contains reservations/declarations made upon or following signature and Part II contains reservations/declarations made upon or following deposit of instrument of consent to be bound. The status of signature, ratification, acceptance, approval or accession by States or organizations as of 31 July 1990 is presented in an attachment
Femtosecond laser interaction with protection materials
Energy Technology Data Exchange (ETDEWEB)
Martin, S.; Krueger, J.; Hertwig, A.; Fiedler, A.; Kautek, W
2003-03-15
Textile, aluminium and polyethylene used as components in laser protection curtains were investigated with respect to their ablation behaviour. Employing 33-fs pulses (800 nm wavelength, 1 kHz repetition rate), ex situ geometrical measurements of the ablation cavities and in situ acoustic investigations with a microphone were performed to determine the ablation thresholds in the single- and multi-pulse cases. The acoustical method proved advantageous for complex surface morphologies and/or single laser pulse interactions. Incubation phenomena can be observed for all the materials studied. Technically relevant multi-pulse ablation thresholds are presented and are compared with the single-pulse (1-on-1) irradiation.
Legal significance of environmental protection in foreign investments law
Divljak Drago
2013-01-01
The paper presents the analysis of conceptual interaction between foreign investments and environmental protection, as well as its legal repercussions. A part of the paper has been directed towards critical review of the attempt of legal regulating of these relationships at an international level. A special attention was paid to the treatment of the environment in our foreign investments law. It can be concluded that the dominant paradigm of the future direction of development in this field i...
Maintenance standards, care and control of the radiation protection material
International Nuclear Information System (INIS)
Brasesco, L.
2004-01-01
The present protocol in Radiology, Tomography, surgical block and intensive care unit in the Britanic Hospital from Uruguay.Between their topics find care procedures in protective clothes, periodic and control methods, material record,and staff assigned
Dejkovski, Nick
2016-10-01
This paper reports the audit findings of the waste management practices at 30 construction materials testing (CMT) laboratories (constituting 4.6% of total accredited CMT laboratories at the time of the audit) that operate in four Australian jurisdictions and assesses the organisation's Environmental Management System (EMS) for indicators of progress towards sustainable development (SD). In Australia, waste indicators are 'priority indicators' of environmental performance yet the quality and availability of waste data is poor. National construction and demolition waste (CDW) data estimates are not fully disaggregated and the contribution of CMT waste (classified as CDW) to the national total CDW landfill burden is difficult to quantify. The environmental and human impacts of anthropogenic release of hazardous substances contained in CMT waste into the ecosphere can be measured by construing waste indicators from the EMS. An analytical framework for evaluating the EMS is developed to elucidate CMT waste indicators and assess these indicators against the principle of proportionality. Assessing against this principle allows for: objective evaluations of whether the environmental measures prescribed in the EMS are 'proportionate' to the 'desired' (subjective) level of protection chosen by decision-makers; and benchmarking CMT waste indicators against aspirational CDW targets set by each Australian jurisdiction included in the audit. Construed together, the EMS derived waste indicators and benchmark data provide a composite indicator of environmental performance and progress towards SD. The key audit findings indicate: CMT laboratories have a 'poor' environmental performance (and overall progress towards SD) when EMS waste data are converted into indicator scores and assessed against the principle of proportionality; CMT waste recycling targets are lower when benchmarked against jurisdictional CDW waste recovery targets; and no significant difference in the average
Solar Sail Material Performance Property Response to Space Environmental Effects
Edwards, David L.; Semmel, Charles; Hovater, Mary; Nehls, Mary; Gray, Perry; Hubbs, Whitney; Wertz, George
2004-01-01
The National Aeronautics and Space Administration's (NASA) Marshall Space Flight Center (MSFC) continues research into the utilization of photonic materials for spacecraft propulsion. Spacecraft propulsion, using photonic materials, will be achieved using a solar sail. A solar sail operates on the principle that photons, originating from the sun, impart pressure to the sail and therefore provide a source for spacecraft propulsion. The pressure imparted to a solar sail can be increased, up to a factor of two, if the sun-facing surface is perfectly reflective. Therefore, these solar sails are generally composed of a highly reflective metallic sun-facing layer, a thin polymeric substrate and occasionally a highly emissive back surface. Near term solar sail propelled science missions are targeting the Lagrange point 1 (Ll) as well as locations sunward of L1 as destinations. These near term missions include the Solar Polar Imager and the L1 Diamond. The Environmental Effects Group at NASA s Marshall Space Flight Center (MSFC) continues to actively characterize solar sail material in preparation for these near term solar sail missions. Previous investigations indicated that space environmental effects on sail material thermo-optical properties were minimal and would not significantly affect the propulsion efficiency of the sail. These investigations also indicated that the sail material mechanical stability degrades with increasing radiation exposure. This paper will further quantify the effect of space environmental exposure on the mechanical properties of candidate sail materials. Candidate sail materials for these missions include Aluminum coated Mylar[TM], Teonex[TM], and CPl (Colorless Polyimide). These materials were subjected to uniform radiation doses of electrons and protons in individual exposures sequences. Dose values ranged from 100 Mrads to over 5 Grads. The engineering performance property responses of thermo-optical and mechanical properties were
2010-12-22
... of omnibus drug legislation on November 18, 1988. Federal agencies issued an interim final common...; FRL- 9242-2] Environmental Protection Agency Implementation of OMB Guidance on Drug-Free Workplace... Protection Agency is removing its regulation implementing the Governmentwide common rule on drug-free...
Fisher, Celia B
2006-10-01
In pediatric environmental health research, information about family members is often directly sought or indirectly obtained in the process of identifying child risk factors and helping to tease apart and identify interactions between genetic and environmental factors. However, federal regulations governing human subjects research do not directly address ethical issues associated with protections for family members who are not identified as the primary "research participant." Ethical concerns related to family consent and privacy become paramount as pediatric environmental health research increasingly turns to questions of gene-environment interactions. In this article I identify issues arising from and potential solutions for the privacy and informed consent challenges of pediatric environmental health research intended to adequately protect the rights and welfare of children, family members, and communities. I first discuss family members as secondary research participants and then the specific ethical challenges of longitudinal research on late-onset environmental effects and gene-environment interactions. I conclude with a discussion of the confidentiality and social risks of recruitment and data collection of research conducted within small or unique communities, ethnic minority populations, and low-income families. The responsible conduct of pediatric environmental health research must be conceptualized as a goodness of fit between the specific research context and the unique characteristics of subjects and other family stakeholders.
International Nuclear Information System (INIS)
Pesic, M.; Nikolic, A.; Nikoli, D.; Stegnar, P.
2002-01-01
Full text: In more than ten last years region of South-Europe, especially countries originated from previous the Socialistic Federal Republics of Yugoslavia, are involved or surrounded, at least, by various conflicts including wars of different intensities. These unfavorable environment conditions have put additional focus at nuclear material kept in various institutions in the region. Following the IAEA recommendation on straighten the physical protection of nuclear material various actions are done or planned in the Yugoslavia and Slovenia to increase level of physical protection of nuclear material during its different usage and storage. Especial attention is drawn to update the administration rules, education of the involved personnel and redundancy of different physical protection modes of protection to prevent thieves and smuggling of nuclear material in the country or at country borders. The financial and experts help were offered by the IAEA at low level scale to Yugoslavia in 1996/97 to increase the physical protection of the fresh high-enriched uranium fuel stored and controlled regularly by the inspectors of the safeguard department of the IAEA. The further help and financial support is expected from the IAEA and relevant EU organization in aim to tighter the country borders to prevent the illegal traffic of nuclear material through the Europe. (author)
International Nuclear Information System (INIS)
Ramirez Quijada, R.
2001-01-01
Full text: The signature of Peru to become part of the Convention of Physical Protection of Nuclear Material in 1995 has implied an obligation to formalize the legal and regulatory infrastructure for this purpose. As first step, physical protection measures were formalized on the two nuclear facilities: one critical assembly of zero power (RP0) and another research reactor of 10 Mw thermal power (RP10). Both of the installations use low enriched uranium nuclear fuel (Material and Testing Material - MTR type). On the other side, even thorium was put in perspective to control; currently it is being used for non-nuclear purposes and has not been included inside the physical protection measures. Its physical and chemical form and its small quantity do not warrant for applying the Convention. The physical protection measures implemented in the research reactor are well depicted and it is concluded that the physical protection system meets the recommendations of INFCIRC/225/Rev.3. The critical facility (RP0), as having nuclear material categorized III, has implemented a less restrictive system but enough to meet the requirements. In 1999 an evaluation of all physical protection systems was performed for these two nuclear installations. This evaluation took into account the recommendations of INFCIRC/225/Rev.4. The general conclusion was that the performance of physical protection system was suitable to the categories of nuclear material - II and III - and that the installations where nuclear material is used were suitably protected against non-authorized or illegal removal of nuclear material and sabotage. However, some of components of the system were not appropriately working and could make all of the system weak. Another of the identified problems was the lack of a rule on physical protection and also the lack of the Design Basis Threat, although this fact was well known due the social conditions in the country. The second undertaking has been to prepare the rule on
Leaching of spent fuel in the presence of environmental material
International Nuclear Information System (INIS)
Le Lous, Karine
1997-01-01
The aim of this work is the study of the alteration kinetics of spent fuels and the making of a status of the radioactivity released by spent fuels in conditions of direct disposal in deep underground. A system has been fitted inside a shielded cell to study the leaching by synthetic groundwater of fuel powder irradiated at 60 GWJ.tU -1 in the presence of environmental material (clay or granite) at 40 bars and 90 deg. C. This system allows to reach and keep reductive conditions characteristic of the redox conditions of a deep geological repository. The preparation of calibrated spent fuel powders and the recovery of the activity fixed by the environmental materials has required the implementation of specific procedures. Similar experiments have been performed in parallel with Simfuel in a controlled area. A first series of experiments has been carried out in 4 environments for each fuel. Important sorption phenomena take place in the environmental materials and the actinide concentrations stabilize rapidly at low values: 10 -8 mol/l for U, 10 -12 mol/l for Pu and 10 -13 -10 -14 mol/l for Cm. The activity released by 90 Sr at the end of each experiment is about two times higher in the presence of clay than in the presence of granite. The average alteration rates are of about 0.2 mg.m -2 /day in the presence of granite and 0.4 to 0.6 mg.m -2 /day in the presence of clay. They are comparable to those reported in the literature for reducing conditions. Such tests are necessary to determine the leaching rate of spent fuels in reducing conditions and in the absence of environmental materials in order to show the possible effects of these materials. (J.S.)
International Nuclear Information System (INIS)
Yue Huiguo; Lin Quanyi; Zhang Jiangang
2010-01-01
This article introduces the design features and main functions of The Nuclear and Radiation Emergency Evaluation and Decision Support System. The Ministry of Environmental Protection will construct a complete set of evaluation and decision-making system at the Nuclear Safety Center of Ministry of Environmental Protection to cope with the sudden event. The system will provide a comprehensive technical support for the consequence evaluation and decision-making of anti-terrorism event according to the responsibility of MEP in the sudden event, with the data provided by the MEP's anti-terrorism information platform. (authors)
Proceedings of the Eleventh Radiation Physics and Protection Conference
International Nuclear Information System (INIS)
2013-01-01
The proceeding contains of 404 pages, the available maertial of 35 contributions: and covering of conference topics: Plenary, Invited, Keynote Talks. Nuclear Power Plant Accident. Cosmogenic Radionuclides. Waste Storage and Disposal Solutions. Radiation Medical Physics. Radiation Detection and Measurements. Radioactive in Building Materials. Radiation Protection Regulations and public Protection. Environmental Radioactivity.
A comprehensive approach to managing hazardous materials
International Nuclear Information System (INIS)
Donovan, A.
1990-01-01
An increased emphasis on the need for environmental protection indicates that engineers must now consider the disposition of unused hazardous materials as waste. Before specifying and ordering materials, the engineer must consider the impact of the Resource Conservation and Recovery Act (RCRA) and the Occupational Safety and Health Administration's (OSHA's) Hazard Communication Standard. Many commonly used materials such as paint, solvents, glues, and sealants fall under the requirements of these regulations. This paper presents a plant to manage hazardous materials at the US Department of Energy's (DOE's) Waste Isolation Pilot Plant (WIPP), which is managed and operated by Westinghouse Electric Corporation. The basic elements of the plan are training, hazard communication, storage and handling, tracking, and disposal. Steps to be taken to develop the plan are outlined, problems and successes are addressed, and interactions among all affected departments are identified. The benefits of an organized and comprehensive approach to managing hazardous materials are decreased worker injuries, reduction of accidental releases, minimization of waste, and compliance with federal, state, and local safety and environmental laws. In summary, the benefits of an organized program for the management of hazardous materials include compliance with the Environmental Protection Agency's (EPA's) requirements, demonstration of Westinghouse's role as a responsible corporate entity, and reduction of waste management costs
International Trade in Environmental Protection Equipment: An Assessment of Existing Data (1993)
Study estimates total U.S. imports, exports, and trade balances for environmental protection (EP) equipment between 1980-1991. While the United States is a major exporter of EP equipment, trade in EP equipment constitutes a small percent of total US trade.
Energy Technology Data Exchange (ETDEWEB)
Gomes, Sarah Barreto Oliveira de Christo; Peres, Sueli da Silva, E-mail: suelip@ird.gov.br, E-mail: sarah.barreto1@gmail.com [Instituto de Radioproteção e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Div. de Radioproteção
2017-07-01
As a branch of the Brazilian Nuclear Energy Commission (CNEN), the Institute of Radiation Protection and Dosimetry (IRD) performs extensive activities in the fields of radiation protection, metrology, and dosimetry, as well as specific education, onto a wide operational scope that includes the technical support to national regulatory authorities in the licensing process for nationwide nuclear and radioactive facilities. IRD has several laboratories where are performed radiometric and radiochemical analyses and others radioactivity evaluation procedures in different types of samples obtained in the inspection activities, production of radioactivity metrological standards and reference material by National Laboratory of Metrology of Ionizing Radiation (LMNRI), besides others research activities. In this laboratories can be used sealed or unsealed radioactive sources and radiation-producing devices and are classified with radioactive installations in accordance to national regulations. This way, radioactive liquid effluents can be eventually produced and released into the environment in the course of such activities and an effluent monitoring program to control and reduce the releases to environment is carried out. Additionally, IRD maintains the Radioactive Waste Management Program and Environmental Radiological Monitoring Program (ERMP) in accordance to national regulations requirements. The primary focus of ERMP comprises the validation of the dose prognostics for the public members due to effluents discharge and the provision of consistent projections of the radiation levels at the monitoring sites. In this study, a long term ERMP data survey is discussed, spanning the last thirteen years of activities. On the basis of such discussions and prognostics, it could be observed that the radiological environmental radiological impact due to operation of IRD installations is negligible. (author)
International Nuclear Information System (INIS)
Gomes, Sarah Barreto Oliveira de Christo; Peres, Sueli da Silva
2017-01-01
As a branch of the Brazilian Nuclear Energy Commission (CNEN), the Institute of Radiation Protection and Dosimetry (IRD) performs extensive activities in the fields of radiation protection, metrology, and dosimetry, as well as specific education, onto a wide operational scope that includes the technical support to national regulatory authorities in the licensing process for nationwide nuclear and radioactive facilities. IRD has several laboratories where are performed radiometric and radiochemical analyses and others radioactivity evaluation procedures in different types of samples obtained in the inspection activities, production of radioactivity metrological standards and reference material by National Laboratory of Metrology of Ionizing Radiation (LMNRI), besides others research activities. In this laboratories can be used sealed or unsealed radioactive sources and radiation-producing devices and are classified with radioactive installations in accordance to national regulations. This way, radioactive liquid effluents can be eventually produced and released into the environment in the course of such activities and an effluent monitoring program to control and reduce the releases to environment is carried out. Additionally, IRD maintains the Radioactive Waste Management Program and Environmental Radiological Monitoring Program (ERMP) in accordance to national regulations requirements. The primary focus of ERMP comprises the validation of the dose prognostics for the public members due to effluents discharge and the provision of consistent projections of the radiation levels at the monitoring sites. In this study, a long term ERMP data survey is discussed, spanning the last thirteen years of activities. On the basis of such discussions and prognostics, it could be observed that the radiological environmental radiological impact due to operation of IRD installations is negligible. (author)
International Nuclear Information System (INIS)
Herron, L.W.
1981-10-01
This paper provides a detailed analysis of developments in the number field having led the IAEA to promote international cooperation in ensuring adequate physical protection of nuclear facilities and materials. This work resulted in the establishment of recommendations and guidelines in this respect and culminated in the development of the 1980 Convention on the Physical Protection of Nuclear Materials. (NEA) [fr
The Environmental Technology Verification Program (ETV) was established in 1995 by the U.S. Environmental Protection Agency to encourage the development and commercialization of new environmental technologies through third part testing and reporting of performance data. By ensur...
Resistance of gloves and protective clothing materials to permeation of cytostatic solutions
Sylwia Krzemińska; Małgorzata Pośniak; Małgorzata Szewczyńska
2018-01-01
Objectives The objective of the work was to determine the resistance of selected protective clothing and glove materials to permeation of cytostatics such as docetaxel, fluorouracil, and doxorubicin. Material and Methods The following glove materials were used: natural rubber latex (code A), acrylonitrile-butadiene rubber (code B) and chloroprene rubber (code C). In addition, we tested a layered material composed of a non-woven polyester (PES), a polypropylene (PP) film, ...
Food and Environmental Protection Newsletter, Vol. 19, No. 2, July 2016
International Nuclear Information System (INIS)
2016-07-01
The Food and Environmental Protection (FEP) Subprogramme under the Joint FAO/IAEA Programme of Nuclear Techniques in Food and Agriculture continues to strengthen our joint efforts with the FAO and IAEA to protect human health and facilitate international agricultural trade by providing technical support and training to develop, accelerate and expand the contributions of nuclear technologies to food security and safety through peaceful uses of atomic energy. These activities are primarily related to the use of ionizing radiation; the implementation of traceability systems; analytical techniques to control food contaminants and the management of nuclear and radiological emergencies affecting food and agriculture.
Investing in citizen science can improve natural resource management and environmental protection
McKinley, Duncan C.; Miller-Rushing, Abraham J.; Ballard, Heidi L.; Bonney, Rick; Brown, Hutch; Evans, Daniel M.; French, Rebecca A.; Parrish, Julia K.; Phillips, Tina B.; Ryan, Sean F.; Shanley, Lea A.; Shirk, Jennifer L.; Stepenuck, Kristine F.; Weltzin, Jake F.; Wiggins, Andrea; Boyle, Owen D.; Briggs, Russell D.; Chapin, Stuart F.; Hewitt, David A.; Preuss, Peter W.; Soukup, Michael A.
2015-01-01
Citizen science has made substantive contributions to science for hundreds of years. More recently, it has contributed to many articles in peer-reviewed scientific journals and has influenced natural resource management and environmental protection decisions and policies across the nation. Over the last 10 years, citizen science—participation by the public in a scientific project—has seen explosive growth in the United States, particularly in ecology, the environmental sciences, and related fields of inquiry. In this report, we explore the current use of citizen science in natural resource and environmental science and decision making in the United States and describe the investments organizations might make to benefit from citizen science.
International Nuclear Information System (INIS)
MacDonald, C.R.
1996-01-01
The risk to non-human species from activities associated with the nuclear fuel waste cycle is coming under increased scrutiny from the public and regulators. In the past, protection of the environment was assumed to be an outcome of the protection of humans living in the same area. Thus it was assumed that if nuclides were maintained at low enough levels in water, air and soil to protect humans, then plants and animals inhabiting the same area would be protected. This approach of relying on humans as a sensitive indicator implicitly protects all species, at least at the population level. To adequately predict exposure and response in wild communities requires a detailed knowledge of the ecosystem under study and a method of predicting both the transfer of nuclides to individual species and the consequence of exposure. Detailed environmental, or ecological, risk estimation requires information on the normal levels of radiation and general physiological stress in the exposed group, an estimate of the additional radiation exposure from all pathways and a prediction of the consequences of the total exposure. The purpose of this paper is to review these requirements in the context of ecological radiation protection in the Canadian environment using examples of birds and mammals from the Canadian shield. Our goal is to develop methods which provide better estimates of potential risk to wild animals
Dictionary of materials testing
International Nuclear Information System (INIS)
Goedecke, W.
1992-01-01
This trilingual dictionary contains about 12000 terms from the field of non-destructive and destructive materials testing; the English and French terms can be looked up in two separate, alphabetical indexes. The compilation also presents terms from related fields such as quality control, production control, environmental protection and radiological protection, and wherever appropriate in the context from the fields of physics, chemistry, mathematics and electronic data processing. (HP) [de
International Nuclear Information System (INIS)
Berthaler, W.
2001-05-01
This work focuses on legal instruments serving integrated environmental protection, especially with respect to administrative procedures concerning plant permits, and their inhorent limits. Initially, the legal and scientific approach pursued under the notion of 'integrated environmental protection' and 'environmental impact assessment' is examined and clarified in chapter A. Based thereon, chapter B deals with the obligations resulting from the EIA-Directive and - compared therewith - from the IPPC-Directive with regard to procedures for plant permits. Further, Austria's delay in fully transposing these directives is examined. When dealing with the constitutional basis for transposing the EIA- and IPPC-D into Austrian administrative law (chapter C), the inherent limits of some competence of legislation are discovered to be too narrow to ensure full compliance with EC law; only with regard to EIA, legistation is based on sound constitutional ground. The second part of the work is devoted to three areas of discussion on EIA- and IPPC-procedures under Austrian law: the scope of their applicability (chapter D), the problems of integrated evaluation and the limits of ecological expertise (chapter E) and aspects of public participation (chapter F). The study is concluded by a summary of the main results (chapter G). (author)