Environmental performance reviews. Slovenia

International Nuclear Information System (INIS)

1997-01-01

The ECE Committee on Environmental Policy for the Environmental Performance Review of Slovenia prepared a report on the environmental performance of Slovenia before, during and after the review mission in Ljubljana in November 1996. The Slovene partners in discussion with the review team did not spare time or effort in responding to the queries and requests made. The review mission could therefore benefit from optimal cooperation with Slovene institutions. The report by the review team, including draft recommendations for the solution of existing problems in national environmental policy and management, was submitted for evaluation by the ECE Committee on Environmental Policy at its fourth annual session in Geneva, on 26 May 1997. A high-level delegation from Slovenia attended this session. It was headed by the Minister of the Environment and also included the State Secretaries for Agriculture, Forest and Food, Economic Affairs, Environment, Physical Planning, Transport and Communications, and other delegates. The evaluation by the Committee was based on the in-depth preparation by two reviewing countries, the Netherlands and Poland. At the end of its evaluation, the Committee agreed on a final set of recommendations, replacing the draft recommendations of the review team for inclusion in this publication

Evaluation of Environmental and Hydraulic Performance of Bio-Composite Revetment Blocks

OpenAIRE

Thamer A.  Ahmeed; Nor A.  Alias; Abdul H.  Ghazali; Mohd. S.  Jaafar

2006-01-01

It is necessary to develop a concrete revetment block which can cater for environment and at the same time it will be effective in protecting river banks (stabilize the slope of banks) from scouring during flood. In the present study, the environmental and hydraulic performance of the proposed revetment block was evaluated through laboratory and field tests. The tested revetment block is called bio-composite because it is composed of concrete, plastic mesh and biological material (coconut hus...

Environmental Performance

DEFF Research Database (Denmark)

Svabo, Connie; Lindelof, Anja Mølle

from the perspective of time and liveness as experienced in art on environmental performance discussing how environmental performances frame the temporality of the world. The paper engages with contemporary examples of environmental performances from various disciplines (sound, video, television...

The integrated performance evaluation program quality assurance guidance in support of EM environmental sampling and analysis activities

International Nuclear Information System (INIS)

1994-05-01

EM's (DOE's Environmental Restoration and Waste Management) Integrated Performance Evaluation Program (IPEP) has the purpose of integrating information from existing PE programs with expanded QA activities to develop information about the quality of radiological, mixed waste, and hazardous environmental sample analyses provided by all laboratories supporting EM programs. The guidance addresses the goals of identifying specific PE sample programs and contacts, identifying specific requirements for participation in DOE's internal and external (regulatory) programs, identifying key issues relating to application and interpretation of PE materials for EM headquarters and field office managers, and providing technical guidance covering PE materials for site-specific activities. (PE) Performance Evaluation materials or samples are necessary for the quality assurance/control programs covering environmental data collection

Environmental Performance

DEFF Research Database (Denmark)

Lindelof, Anja Mølle; Schmidt, Ulrik; Svabo, Connie

2017-01-01

Do ants and grasshoppers perform? Do clouds, plants and melting ice? Do skyscrapers, traffic jams and computer vira? And what happens to our understanding of liveness if that is the case? This chapter takes ongoing theoretical disputes about the nature of live performance in performance studies...... as its starting point to investigate liveness within a specific kind of contemporary performance: ‘environmental performances’. Environmental performances are arts practices that take environmental processes as their focus by framing activities of non-human performers such as clouds, wind and weeds - key...

Balanced Evaluation of Structural and Environmental Performances in Building Design

Directory of Open Access Journals (Sweden)

Marco Lamperti Tornaghi

2018-03-01

Full Text Available The design of new buildings, and even more the rehabilitation of existing ones, needs to satisfy modern criteria in terms of energy efficiency and environmental performance, within the context of adequate safety requirements. Tackling all these needs at the same time is cumbersome, as demonstrated by several experiences during recent earthquakes, where the improvement of energy performance vanished by seismic-induced damages. The costs of energy retrofitting must be added to the normal losses caused by the earthquake. Even though the minimum safety requirements are met (no collapse, the damage due to earthquake might be enough to waste the investment made to improve energy efficiency. Since these measures are often facilitated by corresponding incentives, the use of public funding is not cost effective. The application of the existing impact assessment methods is typically performed at the end of the architectural and structural design process. Thus, no real optimisation can be achieved, because a good structural solution could correspond to a poor environmental performance and vice versa. The proposed Sustainable Structural Design method (SSD considers both environmental and structural parameters in the life cycle perspective. The integration of environmental data in the structural performance is the focus of the method. Structural performances are considered in a probabilistic approach, through the introduction of a simplified Performance Based Assessment method. Finally, the SSD method is implemented with a case-study of an office-occupancy building, both for precast and cast-in-situ structural systems, with the aim to find the best solution in terms of sustainability and structural performance for the case at hand.

Using performance measures to evaluate programmatic outputs and outcomes in the Department of Energy's environmental restoration program

International Nuclear Information System (INIS)

Turi, G.; Resch, R.; Shangraw, W.R.

1994-01-01

Over the last year, a revolution has occurred in the use of performance measures in the Department of Energy's (DOE) Office of Environmental Management (EM). The performance measures range from traditional cost and schedule performance criteria to strategic measures of program outcomes. Each area of performance measurement has resulted (or is resulting) in a different approach for evaluating performance using a different set of performance criteria. Although some data elements cross cut the groups, each of the approaches focuses on different data collection process. The Office of Environmental Restoration is attempting to link these groups together through a unified system of performance measurement. This paper will define and discuss each type of performance measurement and its supporting systems or approaches

Evaluating National Environmental Sustainability: Performance Measures and Influential Factors for OECD-Member Countries featuring Canadian Performance and Policy Implications

Science.gov (United States)

Calbick, Kenneth S.

This research reviews five studies that evaluate national environmental sustainability with composite indices; performs uncertainty and sensitivity analyses of techniques for building a composite index; completes principal components factor analysis to help build subindices measuring waste and pollution, sustainable energy, sustainable food, nature conservation, and sustainable cities (Due to its current importance, the greenhouse gases (GHG) indicator is included individually as another policy measure.); analyses factors that seem to influence performance: climate, population growth, population density, economic output, technological development, industrial structure, energy prices, environmental governance, pollution abatement and control expenditures, and environmental pricing; and explores Canadian policy implications of the results. The techniques to build composite indices include performance indicator selection, missing data treatment, normalisation technique, scale-effect adjustments, weights, and aggregation method. Scale-effect adjustments and normalisation method are significant sources of uncertainty inducing 68% of the observed variation in a country's final rank at the 95% level of confidence. Choice of indicators also introduces substantial variation as well. To compensate for this variation, the current study recommends that a composite index should always be analysed with other policy subindices and individual indicators. Moreover, the connection between population and consumption indicates that per capita scale-effect adjustments should be used for certain indicators. Rather than ranking normalisation, studies should use a method that retains information from the raw indicator values. Multiple regression and cluster analyses indicate economic output, environmental governance, and energy prices are major influential factors, with energy prices the most important. It is statistically significant for five out of seven performance measures at the 95

Development of an Integrated Performance Evaluation Program (IPEP) for the Department of Energy's Office of Environmental Restoration and Waste Management

International Nuclear Information System (INIS)

Streets, W.E.; Ka; Lindahl, P.C.; Bottrell, D.; Newberry, R.; Morton, S.; Karp, K.

1993-01-01

Argonne National Laboratory (ANL), in collaboration with DOE's Radiological and Environmental Sciences Laboratory (RESL), Environmental Measurements Laboratory (EML), and Grand Junction Project Office (GJPO), is working with the Department of Energy (DOE) Headquarters and the US Environmental Protection Agency (EPA) to develop the Integrated Performance Evaluation Program (IPEP). The purpose of IPEP is to integrate performance evaluation (PE) information from existing PE programs with expanded quality assurance (QA) activities to develop information about the quality of radiological, mixed waste, and hazardous environmental sample analyses provided by all laboratories supporting DOE Environmental Restoration and Waste Management (EM) programs. The IPEP plans to utilize existing PE programs when available and appropriate for use by DOE-EM; new PE programs will be developed only when no existing program meets DOE's needs

Evaluating the Environmental Performance of Wood-Based Biofuels

Science.gov (United States)

Bruce Lippke; Richard Bergman; Adam Taylor; Maureen E. Puettmann

2012-01-01

The nonprofit Consortium for Research on Renewable Industrial Materials (CORRIM) has been developing comprehensive environmental performance information on wood building materials consistent with life-cycle standards (http://www.corrim.org/). The articles published in this Special Issue of the Forest Products Journal extend the research by the...

Development of the Integrated Performance Evaluation Program (IPEP) for the Department of Energy's Office of Environmental Management

International Nuclear Information System (INIS)

Lindahl, P.; Streets, E.; Bass, D.; Hensley, J.; Newberry, R.; Carter, M.

1995-01-01

Argonne National Laboratory (ANL) and DOE's Radiological and Environmental Sciences Laboratory (RESL), Environmental Measurements Laboratory (EML), and Grand Junction Project office (GJPO) are collaborating with DOE's Office of Environmental Management (EM), Analytical Services Division (ASD, EM-263) and the Environmental Protection Agency (EPA) to develop an Integrated Performance Evaluation Program (IPEP). The purpose of the IPEP is to integrate information from existing PE programs with expanded QA activities to develop information about the quality of radiological, mixed waste, and hazardous environmental sample analyses provided by all laboratories supporting EM programs. The IPEP plans to utilize existing PE programs when available and appropriate for use by DOE; new PE programs will be developed only when no existing program meets DOEs needs. Interagency Agreements have been developed between EPA and DOE to allow DOE to use major existing PE programs developed by EPA. In addition, the DOE radiological Quality Assessment Program (QAP) administered by EML is being expanded for use in EM work. RESL and GJPO are also developing the Mixed Waste Performance Evaluation Program (MAPEP) to provide radiological, inorganic, and organic analytes of interest to EM programs. The use of information from multiple PE programs will allow a more global assessment of an individual laboratory's performance, as well as providing a means of more fairly comparing laboratories' performances in a given analytical area. The EPEP will interact with other aspects of the ASD such as audit and methods development activities to provide an integrated system for assessment and improvement of data quality

A comprehensive evaluation of physical and environmental performances for wet-white leather manufacture

OpenAIRE

Shi, Jiabo; Puig Vidal, Rita; Sang, Jun; Lin, Wei

2016-01-01

This paper presents the comprehensive evaluation results of physical and environmental performances for a novel wet-white (chrome-free) leather manufacturing. The tanning process is optimized as 15 wt% tannic acid (TA) combination with 4 wt% Laponite nanoclay, giving the leather with shrinkage temperature (Ts) above 86 °C. Inductively coupled plasma-atomic emission spectrometry (ICP-AES) measurements indicate that Laponite can be evenly and tightly bound within the leather matrix, which is fu...

Evaluating national environmental sustainability: performance measures and influential factors for OECD-member countries featuring Canadian performance and policy implications

OpenAIRE

Calbick, Kenneth Stuart

2011-01-01

This research reviews five studies that evaluate national environmental sustainability with composite indices; performs uncertainty and sensitivity analyses of techniques for building a composite index; completes principal components factor analysis to help build subindices measuring waste and pollution, sustainable energy, sustainable food, nature conservation, and sustainable cities (Due to its current importance, the greenhouse gases (GHG) indicator is included individually as another poli...

Laboratory performance evaluation reports for management

International Nuclear Information System (INIS)

Lindahl, P.C.; Hensley, J.E.; Bass, D.A.; Johnson, P.L.; Marr, J.J.; Streets, W.E.; Warren, S.W.; Newberry, R.W.

1995-01-01

In support of the US DOE's environmental restoration efforts, the Integrated Performance Evaluation Program (IPEP) was developed to produce laboratory performance evaluation reports for management. These reports will provide information necessary to allow DOE headquarters and field offices to determine whether or not contracted analytical laboratories have the capability to produce environmental data of the quality necessary for the remediation program. This document describes the management report

2012 Environmental Performance Index and Pilot Trend Environmental Performance Index

Data.gov (United States)

National Aeronautics and Space Administration — The 2012 Environmental Performance Index (EPI) ranks 132 countries on 22 performance indicators in the following 10 policy categories: environmental burden of...

Performance evaluation on air pollution reducing facilities and mechanism research on the third-party governance on environmental pollution

Science.gov (United States)

Bingsheng, Xu; Ling, Lin; Jin, Huang; Geng, Wang; Jianhua, Chen; Shuo, Yang; Huiting, Guo

2017-11-01

The paper focuses on developing the operational efficiency of air pollution reducing facilities and the treatment effect of the third-party governance on environmental pollution. Comprehensive analysis method and influence factor analysis are employed to build an evaluation index system by means of discussing major pollution control factors derived from the performance of pollution control equipment operation, environmental protection, technological economy, recourse consumption and manufacturing management. Based on the pattern of environmental pollution control offered by the third-party company, the static games model is further established between the government and the pollution emission firm by considering the whole process of the pollution abatement including investment, construction and operation of the treatment project, which focuses on establishing the policy condition and consequence by discussing the cost and benefit in a short and a long time, respectively. The research results can improve the market access requests of the pollution control equipment and normalize the environmental protection service offered by the third-party company. Moreover, the establishment of the evaluation index system for pollution control equipment and the evaluation mechanism for the third-party governance on environmental pollution has guiding significance on leading environmental protection industry and promoting market-oriented development

The influence of uncertainties of measurements in laboratory performance evaluation by intercomparison program in radionuclide analyses of environmental samples

International Nuclear Information System (INIS)

Tauhata, L.; Vianna, M.E.; Oliveira, A.E. de; Clain, A.F.; Ferreira, A.C.M.; Bernardes, E.M.

2000-01-01

The accuracy and precision of results of the radionuclide analyses in environmental samples are widely claimed internationally due to its consequences in the decision process coupled to evaluation of environmental pollution, impact, internal and external population exposure. These characteristics of measurement of the laboratories can be shown clearly using intercomparison data, due to the existence of a reference value and the need of three determinations for each analysis. In intercomparison studies accuracy in radionuclide assays in low-level environmental samples has usually been the main focus in performance evaluation and it can be estimated by taking into account the deviation between the experimental laboratory mean value and the reference value. The laboratory repeatability of measurements or their standard deviation is seldom included in performance evaluation. In order to show the influence of the uncertainties in performance evaluation of the laboratories, data of 22 intercomparison runs which distributed 790 spiked environmental samples to 20 Brazilian participant laboratories were compared, using the 'Normalised Standard Deviation' as statistical criteria for performance evaluation of U.S.EPA. It mainly takes into account the laboratory accuracy and the performance evaluation using the same data classified by normalised standard deviation modified by a weight reactor that includes the individual laboratory uncertainty. The results show a relative decrease in laboratory performance in each radionuclide assay: 1.8% for 65 Zn, 2.8% for 40 K, 3.4 for 60 Co, 3.7% for 134 Cs, 4.0% for 137 Cs, 4.4% for Th and U nat , 4.5% for 3 H, 6.3% for 133 Ba, 8.6% for 90 Sr, 10.6% for Gross Alpha, 10.9% for 106 Ru, 11.1% for 226 Ra, 11.5% for Gross Beta and 13.6% for 228 Ra. The changes in the parameters of the statistical distribution function were negligible and the distribution remained as Gaussian type for all radionuclides analysed. Data analyses in terms of

Quantifying the environmental performance by exergy-based indicators

NARCIS (Netherlands)

Ptasinski, K.J.; Mancuso, R.T.

2009-01-01

Over the last three decades environmental issues have a direct impact on technology assessment and policy decisions. One of the difficulties with measuring environmental performance is lack of consensus on evaluation of relevant aspects, including materials and energy use, air emissions, solid and

Environmental performance assessment of a company of aluminum surface treatment

Directory of Open Access Journals (Sweden)

Susan Catieri Ramalho

2013-08-01

Full Text Available The purpose of this article was to evaluate the environmental performance of a medium-sized company that provides services for surface treatment of aluminum. The treatment is known as anodizing. The research method was qualitative numerical modeling. The environmental performance of the company was organized into five constructs: atmosphere, wastewater, energy and natural resources, solid waste, and legislation and management. Nineteen indicators were chosen to explain the five constructs. Ten employees of the company prioritized the constructs and evaluated the situation of the indicators by means of a scale of assessment. By means of a mathematical model, the general performance of the environmental operation was calculated at 74.5% of the maximum possible. The indicators that most contributed to the performance not to reach 100% were consumption of electricity and water consumption. The construct of worse performance was natural and energy resources. These are the priorities for future environmental improvement actions that the company may promote.

40 CFR 35.515 - Evaluation of performance.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Evaluation of performance. 35.515 Section 35.515 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL....515 Evaluation of performance. (a) Joint evaluation process. The applicant and the Regional...

Evaluating Tourist Destination Performance: Expanding the Sustainability Concept

Directory of Open Access Journals (Sweden)

Wenbin Luo

2018-02-01

Full Text Available Performance evaluations are a critical tool in promoting the sustainability of tourist destinations. The literature shows a lack of consensus on basic terminology and definitions of destination performance. While research focuses on business efficiency, areas such as development effectiveness, social equality, and environmental integrity are still not well understood, even though these are salient elements of sustainable development. This paper provides a framework for evaluating destination performance under the 4E rubric of economy, efficiency, effectiveness, and environmental quality, which reflects a more holistic and effective destination performance. The information entropy weight method and a multi-factor comprehensive evaluation model are developed and applied to an international destination, Zhangjiajie, China, which was selected as a case study to test the framework developed. Results show that the economy, efficiency, effectiveness, and environmental quality aspects should be considered when evaluating tourism development performance. The empirical analysis shows that based on these criteria, Zhangjiajie’s destination performance improved measurably during the test period from 2005 to 2009. The results indicate that significant events, natural disasters, and financial crises influence performance most.

Standards, intercomparisons and performance evaluations for low-level and environmental radionuclide mass spectrometry and atom counting

International Nuclear Information System (INIS)

Inn, K.G.W.; McCurdy, D.; Bell III, T.; Loesch, R.; Barss, N.M.; Morton, J.S.; Povinec, P.; Burns, K.; Henry, R.

2001-01-01

Because of the demand for higher sensitivity radionuclide measurements, atom counting technology will become an increasingly used modality in geo-and bio-studies, and process control operations. It is anticipated that requests, intercomparisons and performance evaluations services will surge in near future. In anticipation of such requests, the state-of-the-art needed to be assessed for proactive planning purposes. The results of a workshop focused on these issues indicated that there are several ongoing standards, intercomparisons and performance evaluations thrusts which are expected to expand in the future. Furthermore, new projects were planned and the Council on Ionizing Radiation Measurements and Standards (Public and Environmental Radiation Protection subcommittee) ws proposed as an information coordinator. (author)

40 CFR 35.115 - Evaluation of performance.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Evaluation of performance. 35.115 Section 35.115 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL... Evaluation of performance. (a) Joint evaluation process. The applicant and the Regional Administrator will...

A methodology for evaluating social impact of Environmental Education Master Training Program

Directory of Open Access Journals (Sweden)

Loret de Mola, E.

2014-01-01

Full Text Available The paper is intended to describe a methodology for evaluating social impact of Environmental Education master training program by presenting its main stages. The framework serving as starting point and other empirical methods lead to systematized and define the terms of environmental professional training, professional performance of the environmental educator, evaluation, evaluation of professional performance of environmental educators and impact evaluation; as well as distinguishing the functions of impact evaluation in the postgraduate program favoring professor, tutors and trainees development. Previously appraised by consulting experts who gave it high ranks, this methodology is currently being used in evaluating second and third editions.

Performance and evaluation for a single crystal gamma spectrometer in environmental laboratory

International Nuclear Information System (INIS)

Pan Jingquan

1991-01-01

The performance of a Ge(Li) spectrometer system for measuring low-level environmental γ0ray samples is presented. It has a resolution of 2 keV, and an efficiency of 30% relative to 3 by 3 inch NaI (Tl) for the 1332 keV γ-ray of 60 Co. The integral background counts of γ-ray photons is 140 ± 2 cpm in the energy range from 12 to 2000 keV. Based on applications of measuring different types of samples, it is proved that the performance of the Ge(Li) γ-spectrometer system with a 10 cm thickness lead shield, coordinating a good experimental method, will be enough for environmental sample analyses in environmental laboratory

Environmental performance data in environmental report 2008

International Nuclear Information System (INIS)

Sato, Yoshinori; Noritake, Kazumitsu; Kawasaki, Takanori; Nemoto, Asako

2009-02-01

Japan Atomic Energy Agency published the Environmental Report 2008 concerning the activities of FY 2007 in August, 2008 under 'Law Concerning the Promotion of Business Activities with Environmental Consideration by Specified Corporations, etc, by Facilitating Access to Environmental Information, and Other Measures'. This report has been edited to show detailed environmental performance data in FY 2007 as the base of the Environmental Report 2008. This report would not only ensure traceability of the data in order to enhance the reliability of the environmental report, but also make useful measures for promoting activities of environmental considerations in JAEA. The environmental objectives in FY 2007 were to reduce the amounts of electric power consumption, fossil fuel usage, carbon dioxide emissions, and water usage by more than one percent in comparison with those in the previous fiscal year. The detailed environmental performance data in this report has shown that the numerical targets of the environmental objectives in FY 2007 were achieved. (author)

A Novel Environmental Performance Evaluation of Thailand’s Food Industry Using Structural Equation Modeling and Fuzzy Analytic Hierarchy Techniques

Directory of Open Access Journals (Sweden)

Anirut Pipatprapa

2016-03-01

Full Text Available Currently, the environment and sustainability are important topics for every industry. The food industry is particularly complicated in this regard because of the dynamic and complex character of food products and their production. This study uses structural equation modeling (SEM and a fuzzy analytic hierarchy process (FAHP to investigate which factors are suitable for evaluating the environmental performance of Thailand’s food industry. A first-stage questionnaire survey was conducted with 178 managers in the food industry that obtained a certificate from the Department of Industrial Work of Thailand to synthesize the performance measurement model and the significance of the relationship between the indicators. A second-stage questionnaire measured 18 experts’ priorities regarding the criteria and sub-factors involved in the different aspects and assessment items regarding environmental performance. SEM showed that quality management, market orientation, and innovation capability have a significantly positive effect on environmental performance. The FAHP showed that the experts were most concerned about quality management, followed by market orientation and innovation capability; the assessment items for quality policy, quality assurance, and customer orientation were of the most concern. The findings of this study can be referenced and support managerial decision making when monitoring environmental performance.

48 CFR 1536.201 - Evaluation of contracting performance.

Science.gov (United States)

2010-10-01

... performance. 1536.201 Section 1536.201 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY... Contracting for Construction 1536.201 Evaluation of contracting performance. (a) The Contracting Officer will... will file the form in the contractor performance evaluation files which it maintains. (e) The Quality...

Contribution to the integration methodology of environment in the small and medium enterprises or industries: evaluation of environmental performances

International Nuclear Information System (INIS)

Personne, M.

1998-01-01

The integration of environmental criteria into industrial plants working is nowadays an obligation for companies. Implementation of an Environmental Management System (EMS) is a mean to integrate these criteria, and the system registration (by ISO 14001 or EMAS standards) enables companies to demonstrate the validity of their environmental behaviour to interested parties. Our experience in Small and Medium Enterprises (SMEs) has allowed us to note the inadequacy between their environmental integration level and EMS requirements. In addition to that, we have observed that environmental assessment methods, which could enable SMEs to make up for lost time, were not adapted to their specificities. However, two recent approaches are innovative: the first one is based on a progressive processes, the second one on an environmental information system, based on indicators construction. On the basis of existing methods study, improved with our SMEs experience, our approach consists of developing an environmental integration method, joining the progressive aspect (construction of a 'multi-phases' method) and the information treatment (exploitation of environmental data by indicators construction). We propose a four phases method, - environmental performance evaluation, internal and external results exploitation, process perpetuation -, setting up an information treatment system, by means of compliance, progress and monitoring indicators. Leading to implementation of an environmental performance continuous improvement cycle, this process enables companies to step forward EMS implementation. (author)

Benchmarking performance: Environmental impact statements in Egypt

International Nuclear Information System (INIS)

Badr, El-Sayed A.; Zahran, Ashraf A.; Cashmore, Matthew

2011-01-01

Environmental impact assessment (EIA) was formally introduced in Egypt in 1994. This short paper evaluates 'how well' the EIA process is working in practice in Egypt, by reviewing the quality of 45 environmental impact statements (EISs) produced between 2000 and 2007 for a variety of project types. The Lee and Colley review package was used to assess the quality of the selected EISs. About 69% of the EISs sampled were found to be of a satisfactory quality. An assessment of the performance of different elements of the EIA process indicates that descriptive tasks tend to be performed better than scientific tasks. The quality of core elements of EIA (e.g., impact prediction, significance evaluation, scoping and consideration of alternatives) appears to be particularly problematic. Variables that influence the quality of EISs are identified and a number of broad recommendations are made for improving the effectiveness of the EIA system.

Evaluation of the environmental performance of alternatives for polystyrene production in Brazil.

Science.gov (United States)

Hansen, Adriana Petrella; da Silva, Gil Anderi; Kulay, Luiz

2015-11-01

The global demand for polystyrene is supposed to reach an overall baseline of 23.5 million tons by 2020. The market has experienced the effects of such growth, especially regarding the environmental performance of the production processes. In Brazil, renewable assets have been used to overcome the adverse consequences of this expansion. This study evaluates this issue for the production of Brazilian polystyrene resins, general-purpose polystyrene (GPPS) and high-impact polystyrene (HIPS). The effects of replacing fossil ethylene with a biobased alternative are also investigated. Life Cycle Assessment is applied for ten scenarios, with different technological approaches for renewable ethylene production and an alternative for obtaining bioethanol, which considers the export of electricity. The fossil GPPS and HIPS show a better performance than the partially renewable sources in terms of Climate Change (CC), Terrestrial Acidification (TA), Photochemical Oxidant Formation (POF), and Water Depletion (WD). The exception is Fossil Depletion (FD), a somewhat predictable result. The main environmental loads associated with the renewable options are related to the sugarcane production. Polybutadiene fails to provide greater additional impact to HIPS when compared to GPPS. With regard to obtaining ethylene from ethanol, Adiabatic Dehydration (AD) technology consumes less sugarcane than Adiabatic Dehydration at High Pressure (ADHP), which leads to gains in TA and POF. In contrast, ADHP was more eco-friendly for WD because of its lower water losses and in terms of CC because of the advantageous balance of fossil CO2(eq) at the agricultural stage and the lower consumption of natural gas in ethylene production. The electricity export is an auspicious environmental opportunity because it can counterbalance some of the negative impacts associated with the renewable route. According to a "cradle-to-grave" perspective, the partially renewable resins show a more favorable balance of

Environmental performance reviews. Estonia

International Nuclear Information System (INIS)

1996-01-01

This review of Estonia is the first environmental performance review (EPR) carried out under the auspices of the ECE Committee on Environmental Policy. This pilot ECE study builds, inter alia, on the experience gained in the preparation of pilot environmental performance reviews of Poland and Bulgaria, which were carried out in 1994-1995 by OECD in cooperation with ECE. The report focuses on capacity building; air, water, waste, and nature management; the integration of environmental and economic policies both generally and more specifically within the energy sector; and cooperation of Estonia with the international community. The review examines the current situation, recent and likely future trends, pressures, policy responses and their effectiveness. The principal conclusions and recommendations for improving Estonia's environmental performance are brought together in the concluding chapter.

Improving environmental impact and cost assessment for supplier evaluation

Science.gov (United States)

Beucker, Severin; Lang, Claus

2004-02-01

Improving a company"s environmental and financial performance necessitates the evaluation of environmental impacts deriving from the production and cost effects of corporate actions. These effects have to be made transparent and concrete targets have to be developed. Such an evaluation has to be done on a regular basis but with limited expenses. To achieve this, different instruments of environmental controlling such as LCA and environmental performance indicators have to be combined with methods from cost accounting. Within the research project CARE (Computer Aided Resource Efficiency Accounting for Medium-Sized Enterprises), the method Resource Efficiency Accounting (REA) is used to give the participating companies new insights into hidden costs and environmental effects of their production and products. The method combines process based cost accounting with environmental impact assessment methodology and offers results that can be integrated into a company"s environmental controlling system and business processes like cost accounting, supplier assessment, etc. Much of the data necessary for the combined assessment can be available within a company"s IT system and therefore can be efficiently used for the assessment process. The project CARE puts a strong focus on the use of company data and information systems for the described assessment process and offers a methodological background for the evaluation and the structuring of such data. Besides the general approach of the project CARE the paper will present results from a case study in which the described approach is used for the evaluation of suppliers.

Evaluation of a draft standard on performance specifications for health physics instrumentation: results for environmental tests

International Nuclear Information System (INIS)

Kenoyer, J.L.; Swinth, K.L.; Mashburn, K.R.; Selby, J.M.

1984-06-01

Draft ANSI Standard N42.17 on performance specifications for health physics instrumentation is currently being evaluated by the Pacific Northwest Laboratory. Evaluation is performed by testing a cross-section of currently available instruments with testing procedures based on specifications of the standard and then determining the degree of conformance to the various elements of the proposed standard. Data will be presented on the performance of a cross-section of beta-gamma survey instruments under various environmental tests. Test results that will be presented include temperature effects, humidity effects, radio frequency (r.f.) susceptibility, ambient pressure effects, vibration effects, and shock effects. Tests performed to date show that most instruments will meet the temperature, humidity, and ambient pressure tests. A large variability is noted among instruments from the same or different vendors. Preliminary r.f. susceptibility tests have shown large artificial responses at some frequencies for specific instruments. The presentation will also include a discussion of procedures used in the testing and weaknesses identified in the proposed standard

Environmental Performance Report 2015

Energy Technology Data Exchange (ETDEWEB)

2016-07-01

The National Renewable Energy Laboratory's (NREL's) Environmental Performance Report provides a description of the laboratory's environmental management activities for 2015, including information on environmental and sustainability performance, environmental compliance activities and status, and environmental protection programs, highlights, and successes. The purpose of this report is to ensure that U.S. Department of Energy (DOE) and the public receive timely, accurate information about events that have affected or could adversely affect the health, safety, and security of the public or workers; the environment; or the operations of DOE facilities. This report meets the requirements of the Annual Site Environmental Report and is prepared in accordance with the DOE Order 231.1B, Environment, Safety and Health Reporting.

Environmental Performance Report 2016

Energy Technology Data Exchange (ETDEWEB)

Braus, Genevieve [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-06

The National Renewable Energy Laboratory's (NREL's) Environmental Performance Report provides a description of the laboratory's environmental management activities for 2016, including information on environmental and sustainability performance, environmental compliance activities and status, and environmental protection programs, highlights, and successes. The purpose of this report is to ensure that U.S. Department of Energy (DOE) and the public receive timely, accurate information about events that have affected or could adversely affect the health, safety, and security of the public or workers; the environment; or the operations of DOE facilities. This report meets the requirements of the Annual Site Environmental Report and is prepared in accordance with the DOE Order 231.1B, Environment, Safety and Health Reporting.

Towards integrating environmental performance in divisional performance measurement

Directory of Open Access Journals (Sweden)

Collins C Ngwakwe

2014-08-01

Full Text Available This paper suggests an integration of environmental performance measurement (EPM into conventional divisional financial performance measures as a catalyst to enhance managers’ drive toward cleaner production and sustainable development. The approach is conceptual and normative; and using a hypothetical firm, it suggests a model to integrate environmental performance measure as an ancillary to conventional divisional financial performance measures. Vroom’s motivation theory and other literature evidence indicate that corporate goals are achievable in an environment where managers’ efforts are recognised and thus rewarded. Consequently the paper suggests that environmentally motivated managers are important to propel corporate sustainability strategy toward desired corporate environmental governance and sustainable economic development. Thus this suggested approach modestly adds to existing environmental management accounting (EMA theory and literature. It is hoped that this paper may provide an agenda for further research toward a practical application of the suggested method in a firm.

Environmental performance data in environmental report 2012

International Nuclear Information System (INIS)

Suzuki, Yurina; Tatebe, Kazuaki; Ohtake, Masaki; Shirato, Seiichi

2013-03-01

In September, 2012 Japan Atomic Energy Agency published the Environmental Report 2012 concerning the activities of FY 2011 under 'Law Concerning the Promotion of Business Activities with Environmental Consideration by Specified Corporations, etc, by Facilitating Access to Environmental Information, and Other Measures'. This report has been edited to show detailed environmental performance data in FY 2011 as the base of the Environmental Report 2012. This report would not only ensure traceability of the data in order to enhance the reliability of the environmental report, but also make useful measures for promoting activities of environmental considerations in JAEA. (author)

Environmental performance data in environmental report 2015

International Nuclear Information System (INIS)

Suzuki, Yurina; Kanai, Katsuta; Sato, Sadayuki; Tatebe, Kazuaki

2016-03-01

In September, 2015 Japan Atomic Energy Agency (JAEA) published the Environmental Report 2015 concerning the activities of FY 2014 under 'Law Concerning the Promotion of Business Activities with Environmental Consideration by Specified Corporations, etc., by Facilitating Access to Environmental Information, and Other Measures'. This report has been edited to show detailed environmental performance data in FY 2014 as the base of the Environmental Report 2015. This report would not only ensure traceability of the data in order to enhance the reliability of the environmental report, but also make useful measures for promoting activities of environmental considerations in JAEA. (author)

Environmental performance data in environmental report 2009

International Nuclear Information System (INIS)

Sato, Yoshinori; Noritake, Kazumitsu; Kawasaki, Takanori; Suzuki, Yurina; Nemoto, Asako

2010-02-01

In July, 2009 Japan Atomic Energy Agency published the Environmental Report 2009 concerning the activities of FY 2008 under 'Law Concerning the Promotion of Business Activities with Environmental Consideration by Specified Corporations, etc, by Facilitating Access to Environmental Information, and Other Measures'. This report has been edited to show detailed environmental performance data in FY 2008 as the base of the Environmental Report 2009. This report would not only ensure traceability of the data in order to enhance the reliability of the environmental report, but also make useful measures for promoting activities of environmental considerations in JAEA. (author)

Environmental performance data in environmental report 2013

International Nuclear Information System (INIS)

Suzuki, Yurina; Ohtake, Masaki; Shirato, Seiichi; Tatebe, Kazuaki

2014-03-01

In September, 2013 Japan Atomic Energy Agency published the Environmental Report 2013 concerning the activities of FY 2012 under 'Law Concerning the Promotion of Business Activities with Environmental Consideration by Specified Corporations, etc, by Facilitating Access to Environmental Information, and Other Measures'. This report has been edited to show detailed environmental performance data in FY 2012 as the base of the Environmental Report 2013. This report would not only ensure traceability of the data in order to enhance the reliability of the environmental report, but also make useful measures for promoting activities of environmental considerations in JAEA. (author)

Guidelines for evaluating the environmental performance of Product/Service-Systems through life cycle assessment

DEFF Research Database (Denmark)

Kjær, Louise Laumann; Pigosso, Daniela C. A.; McAloone, Tim C.

2018-01-01

Product/Service-Systems (PSS) such as integrated solutions, performance-based contracts or sharing systems are often proposed as means to enable improved environmental sustainability. However, PSS are not necessarily environmentally benign compared to conventional systems. Quantitative environmen......Product/Service-Systems (PSS) such as integrated solutions, performance-based contracts or sharing systems are often proposed as means to enable improved environmental sustainability. However, PSS are not necessarily environmentally benign compared to conventional systems. Quantitative....... In this article, we propose a set of guidelines consisting of six steps, which elaborates the LCA process with respect to the specific consideration for PSS assessment. The guidelines were developed based on identified challenges for the application of LCA on PSS, a review of existing LCAs on PSS case studies...

Comparative evaluation of power plants with CO2 capture. Thermodynamic, economic and environmental performance

International Nuclear Information System (INIS)

Petrakopoulou, Fontina

2011-01-01

CCS (Carbon Capture and Sequestration) in the energy sector is seen as a bridge technology for CO 2 mitigation, due to the ever-growing environmental impact of anthropogenic-emitted greenhouse gases. In this work, eight power plant concepts using CO 2 capture technologies are assessed based on their efficiency, economic feasibility and environmental footprint. Exergy-based analyses are used for evaluating the considered power plants through comparison with a reference plant without CO 2 capture. While conventional exergy-based analyses provide important information that can lead to improvements in plant performance, additional insight about individual components and the interactions among equipment can aid further assessment. This led to the development of advanced exergy-based analyses, in which the exergy destruction, as well as the associated costs and environmental impacts are split into avoidable/unavoidable and endogenous/exogenous parts. Based on the avoidable parts, the potential for improvement is revealed, while based on the endogenous/exogenous parts, the component interactions are obtained. Among the examined plants with CO 2 capture, the most efficient are those working with oxy-fuel technology. An exergoeconomic analysis shows a minimum increase in the relative investment cost (in Euro/kW) of 80% for the conventional approach (chemical absorption) and an increase of 86% for the oxy-fuel plant with chemical looping combustion. The latter shows a somewhat decreased environmental impact when compared to that of the reference plant. On the contrary, the plant with chemical absorption results in a higher environmental penalty due to its high efficiency penalty. Therefore, accepting that all assumptions and data related to the calculations of the environmental impacts are reliable, efficiency improvement seems to be a more significant factor in potentially decreasing a plant's environmental impact. With advanced exergy-based analyses, interdependencies

Environmental Performance Information Use by Conservation Agency Staff

Science.gov (United States)

Wardropper, Chloe Bradley

2018-04-01

Performance-based conservation has long been recognized as crucial to improving program effectiveness, particularly when environmental conditions are dynamic. Yet few studies have investigated the use of environmental performance information by staff of conservation organizations. This article identifies attitudinal, policy and organizational factors influencing the use of a type of performance information—water quality information—by Soil and Water Conservation District staff in the Upper Mississippi River Basin region. An online survey ( n = 277) revealed a number of important variables associated with greater information use. Variables included employees' prosocial motivation, or the belief that they helped people and natural resources through their job, the perceived trustworthiness of data, the presence of a U.S. Clean Water Act Total Maximum Daily Load standard designation, and staff discretion to prioritize programs locally. Conservation programs that retain motivated staff and provide them the resources and flexibility to plan and evaluate their work with environmental data may increase conservation effectiveness under changing conditions.

2010 Environmental Performance Index (EPI)

Data.gov (United States)

National Aeronautics and Space Administration — The 2010 Environmental Performance Index (EPI) ranks 163 countries on environmental performance based on twenty-five indicators grouped within ten core policy...

Assessing the performance of Taiwan’s environmental protection system with a non-radial network DEA approach

International Nuclear Information System (INIS)

Huang, Chin-wei; Chiu, Yung-ho; Fang, Wei-ta; Shen, Neng

2014-01-01

Previous studies involving environmental performance purely focus on analyzing environmental or waste treatment efficiencies. This study combines various aspects of environmental protection and establishes a non-radial network DEA approach to evaluate the performance of an environmental protection system. The empirical methodology assumes that the system consists of three stages: administrative, executive processes, and protection effectiveness. The executive process includes waste treatment and pollution auditing divisions. In addition to assessing efficiencies, the empirical evaluation further explores the internal and external influences on performances and contributes implications and suggestions for environmental policy makers. The proposed model is utilized to gauge the performance of an environmental protection system for 20 municipalities in Taiwan. The results indicate the following: (1) for improving environmental quality, the government needs to put forth greater efforts in environmental audits; (2) improving productivity per unit so as to increase achievements in the executive process is more important for raising performance on environmental work, in addition to increasing workers and equipment for environmental protection; (3) a high degree of industrialization negatively influences administrative efficiency and educated residents have a greater comprehension for administrative operations, which can help in efficient budget utilization. - Highlights: • A non-radial network DEA approach to evaluate the Performance of Environmental Protection System. • The performance of waste treatment performs better than the efficiency of auditing. • Governmental expenditure is more efficiently utilized in the administrative process. • The effectiveness of achieved protection is a critical indicator for revealing environmental quality in a region

Benchmark dynamics in the environmental performance of ports.

Science.gov (United States)

Puig, Martí; Michail, Antonis; Wooldridge, Chris; Darbra, Rosa Mari

2017-08-15

This paper analyses the 2016 environmental benchmark performance of the port sector, based on a wide representation of EcoPorts members. This is the fifth time that this study has been conducted as an initiative of the European Sea Ports Organisation (ESPO). The data and results are derived from the Self-Diagnosis Method (SDM), a concise checklist against which port managers can self-assess the environmental management of their port in relation to the performance of the EcoPorts membership. The SDM tool was developed in the framework of the ECOPORTS project (2002-2005) and it is managed by ESPO. A total number of 91 ports from 20 different European Maritime States contributed to this evaluation. The main results are that air quality remains as the top environmental priority of the respondent ports, followed by energy consumption and noise. In terms of environmental management, the study confirms that key components are commonly implemented in the majority of European ports. 94% of contributing ports have a designated environmental manager, 92% own an environmental policy and 82% implement an environmental monitoring program. Waste is identified as the most monitored issue in ports (80%), followed by energy consumption (73%) and water quality (70%). Copyright © 2017 Elsevier Ltd. All rights reserved.

Recovery and evaluation of historical environmental monitoring data at Hanford

International Nuclear Information System (INIS)

Dirkes, R.L.

1991-01-01

The objective of the Hanford Environmental Dose Reconstruction (HEDR) Project is to estimate the radiation doses that populations could have received from the nuclear operations at the Hanford site since 1944. The Environmental Monitoring Data Task within HEDR is charged with assembling, evaluating, and summarizing key historical measurements of radionuclide concentrations in the environment on and around the Hanford site. The recovery and evaluation of historical environmental monitoring data are integral parts of the environmental dose reconstruction process. The data generated through historical environmental monitoring programs may be critical in the development of dose modeling codes and in performing a meaningful environmental pathway analysis. In addition, environmental monitoring data are essential in the verification of model calculations and in the validation of the model itself. The paper a task logic flowchart illustrating how the process evolves within the Environmental Monitoring Data Task and the interaction with other project tasks. The reconstruction of such data presents numerous challenges, many of which are not generally encountered in typical scientific studies. This paper discusses the process of reconstructing historical environmental monitoring data at Hanford. Several of the difficulties encountered during this process are presented. Items that may be beneficial and should be considered in performing such a task are identified

Environmental clustering of lakes to evaluate performance of a macrophyte index of biotic integrity

Science.gov (United States)

Vondracek, Bruce C.; Vondracek, Bruce; Hatch, Lorin K.

2013-01-01

Proper classification of sites is critical for the use of biological indices that can distinguish between natural and human-induced variation in biological response. The macrophyte-based index of biotic integrity was developed to assess the condition of Minnesota lakes in relation to anthropogenic stressors, but macrophyte community composition varies naturally across the state. The goal of the study was to identify environmental characteristics that naturally influence macrophyte index response and establish a preliminary lake classification scheme for biological assessment (bioassessment). Using a comprehensive set of environmental variables, we identified similar groups of lakes by clustering using flexible beta classification. Variance partitioning analysis of IBI response indicated that evaluating similar lake clusters could improve the ability of the macrophyte index to identify community change to anthropogenic stressors, although lake groups did not fully account for the natural variation in macrophyte composition. Diagnostic capabilities of the index could be improved when evaluating lakes with similar environmental characteristics, suggesting the index has potential for accurate bioassessment provided comparable groups of lakes are evaluated.

Contribution to the integration methodology of environment in the small and medium enterprises or industries: evaluation of environmental performances; Contribution a la methodologie d'integration de l'environnement dans les PME-PMI: evaluation des performances environnementales

Energy Technology Data Exchange (ETDEWEB)

Personne, M

1998-01-16

The integration of environmental criteria into industrial plants working is nowadays an obligation for companies. Implementation of an Environmental Management System (EMS) is a mean to integrate these criteria, and the system registration (by ISO 14001 or EMAS standards) enables companies to demonstrate the validity of their environmental behaviour to interested parties. Our experience in Small and Medium Enterprises (SMEs) has allowed us to note the inadequacy between their environmental integration level and EMS requirements. In addition to that, we have observed that environmental assessment methods, which could enable SMEs to make up for lost time, were not adapted to their specificities. However, two recent approaches are innovative: the first one is based on a progressive processes, the second one on an environmental information system, based on indicators construction. On the basis of existing methods study, improved with our SMEs experience, our approach consists of developing an environmental integration method, joining the progressive aspect (construction of a 'multi-phases' method) and the information treatment (exploitation of environmental data by indicators construction). We propose a four phases method, - environmental performance evaluation, internal and external results exploitation, process perpetuation -, setting up an information treatment system, by means of compliance, progress and monitoring indicators. Leading to implementation of an environmental performance continuous improvement cycle, this process enables companies to step forward EMS implementation. (author)

Environmental performance evaluation of hot water supplying systems for domestic use

Directory of Open Access Journals (Sweden)

Luiz Alexandre Kulay

2015-04-01

Full Text Available The consumption profile of Brazilian citizens is changing as alternatives are sought to reduce costs. A major focus of this change of attitude involves expenditures for electricity, particularly in relation to water heating systems. The manufacturers of these devices add value to their products beyond price. A usual strategy is the enhancement of the environmental performance of the product. This study compared four water heating systems: electric, gas, solar and hybrid, using an environmental perspective. The systems were operated under similar conditions. The analysis was conducted by using the Life Cycle Assessment technique, for the impact categories of Climate Change, Acidification Eutrophication and Water, Metal and Fossil Resource depletion. The results indicated that the electric and hybrid systems are less harmful to the environment for all the impact categories under analysis. On the other hand, the gas system provided the worst performance of the group. The solar heating system was penalized due to its dependence on electricity to operate under the conditions in which the study was conducted.

2008 Environmental Performance Index (EPI)

Data.gov (United States)

National Aeronautics and Space Administration — The 2008 Environmental Performance Index (EPI) centers on two broad environmental protection objectives: (1) reducing environmental stresses on human health, and (2)...

Environmental Proactivity and Environmental and Economic Performance: Evidence from the Winery Sector

Directory of Open Access Journals (Sweden)

Virginia Barba-Sánchez

2016-10-01

Full Text Available Environmental sustainability in the winery sector is receiving increased attention from governments, environmental groups, and consumers. The aim of this study is to explore the relationship between the degree of proactivity of a firm’s environmental strategies and its business performance. The novelty of this research work lies in its definition of business performance, which includes business environmental performance in terms of reducing the firm’s environmental impacts and eco-efficiency in the use of resources such as water, energy, and raw materials, in addition to its economic performance. A model is proposed and tested using a sample of 312 Spanish wineries. Data were analysed using partial least squares path modelling (PLS-PM. The fitness and robustness of the structural model proved adequate. The results indicate positive correlation of environmental proactivity with economic and environmental performance. Although environmental proactivity improves business performance, it has a greater impact on reducing environmental impacts and improving eco-efficiency.

Characterising performance of environmental models

NARCIS (Netherlands)

Bennett, N.D.; Croke, B.F.W.; Guariso, G.; Guillaume, J.H.A.; Hamilton, S.H.; Jakeman, A.J.; Marsili-Libelli, S.; Newham, L.T.H.; Norton, J.; Perrin, C.; Pierce, S.; Robson, B.; Seppelt, R.; Voinov, A.; Fath, B.D.; Andreassian, V.

2013-01-01

In order to use environmental models effectively for management and decision-making, it is vital to establish an appropriate level of confidence in their performance. This paper reviews techniques available across various fields for characterising the performance of environmental models with focus

IPEP: Laboratory performance evaluation reports for management of DOE EM programs

International Nuclear Information System (INIS)

Hensley, J.E.; Lindahl, P.C.; Streets, W.E.

1995-01-01

Environmental restoration program/project managers at DOE's Office of Environmental Management (EM) are making important decisions based on analytical data generated by contracted laboratories. The Analytical Services Division, EM-263, is developing the Integrated Performance Evaluation Program (IPEP) to assess the performance of those laboratories, based on results from Performance Evaluation (PE) programs. The IPEP reports will be used by the laboratories to foster self-assessment and improvement. In addition, IPEP will produce PE reports for three levels of EM management (Operations/Project Offices, Area Program Offices, and Deputy Assistant Secretary Office). These reports will be used to assess whether contracted analytical laboratories have the capability to produce environmental data of the quality necessary for making environmental restoration and waste management decisions

Evaluation of operational, economic, and environmental performance of mixed and selective collection of municipal solid waste: Porto case study.

Science.gov (United States)

Teixeira, Carlos A; Russo, Mário; Matos, Cristina; Bentes, Isabel

2014-12-01

This article describes an accurate methodology for an operational, economic, and environmental assessment of municipal solid waste collection. The proposed methodological tool uses key performance indicators to evaluate independent operational and economic efficiency and performance of municipal solid waste collection practices. These key performance indicators are then used in life cycle inventories and life cycle impact assessment. Finally, the life cycle assessment environmental profiles provide the environmental assessment. We also report a successful application of this tool through a case study in the Portuguese city of Porto. Preliminary results demonstrate the applicability of the methodological tool to real cases. Some of the findings focus a significant difference between average mixed and selective collection effective distance (2.14 km t(-1); 16.12 km t(-1)), fuel consumption (3.96 L t(-1); 15.37 L t(-1)), crew productivity (0.98 t h(-1) worker(-1); 0.23 t h(-1) worker(-1)), cost (45.90 € t(-1); 241.20 € t(-1)), and global warming impact (19.95 kg CO2eq t(-1); 57.47 kg CO2eq t(-1)). Preliminary results consistently indicate: (a) higher global performance of mixed collection as compared with selective collection; (b) dependency of collection performance, even in urban areas, on the waste generation rate and density; (c) the decline of selective collection performances with decreasing source-separated material density and recycling collection rate; and (d) that the main threats to collection route efficiency are the extensive collection distances, high fuel consumption vehicles, and reduced crew productivity. © The Author(s) 2014.

The environmental performance of three alcohol fuel plants producers of small, medium and big scale

International Nuclear Information System (INIS)

Borrero, Manuel Antonio Valdes; Pereira, Jose Tomaz Vieira; Miranda, Evaristo Eduardo de

1999-01-01

The article discusses the following issues of alcohol fuel plants producers: sizing; performance; natural resources; environmental aspects; and electric power generation. The environmental performance concept is introduced and a performance evaluation methodology are presented and applied. The results are also presented and criticized

Operational Area Environmental Evaluations

Energy Technology Data Exchange (ETDEWEB)

Bailey-White, Brenda Eileen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nagy, Michael David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wagner, Katrina Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Goodman, Thomas Richard [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Herring, Allen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Catechis, Christopher S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kinghorn, Aubrianna Nicole [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Johnson, Ellie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Barthel, Michael David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Casaus, Benito [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-08-01

The Operational Area Environmental Evaluation update provides a description of activities that have the potential to adversely affect natural and cultural resources, including soil, air, water, biological, ecological, and historical resources. The environmental sensitivity of an area is evaluated and summarized, which may facilitate informed management decisions as to where development may be prohibited, restricted, or subject to additional requirements.

Environmental performance evaluation of an advanced-design solid-state television camera

Science.gov (United States)

1979-01-01

The development of an advanced-design black-and-white solid-state television camera which can survive exposure to space environmental conditions was undertaken. A 380 x 488 element buried-channel CCD is utilized as the image sensor to ensure compatibility with 525-line transmission and display equipment. Specific camera design approaches selected for study and analysis included: (1) component and circuit sensitivity to temperature; (2) circuit board thermal and mechanical design; and (3) CCD temperature control. Preferred approaches were determined and integrated into the final design for two deliverable solid-state TV cameras. One of these cameras was subjected to environmental tests to determine stress limits for exposure to vibration, shock, acceleration, and temperature-vacuum conditions. These tests indicate performance at the design goal limits can be achieved for most of the specified conditions.

Performance of the Brazilian laboratories on radionuclide analysis in environmental samples

International Nuclear Information System (INIS)

Vianna, Maria Elizabeth; Tauhata, Luiz; Oliveira, Josue P.; Oliveira, Antonio E.; Clain, Almir F.; Garcia, Luiz Carlos; Conceicao, Cirilo C. da

1995-01-01

The performance of fifteen Brazilian environmental radioanalytical laboratories was evaluated after their participation in nine intercomparison runs of the National Intercomparison Program, PNI, offered by the Instituto de Radioprotecao e Dosimetria, CNEN. A total of 549 radionuclide determinations in environmental samples were evaluated. The results classified as Good ranged from 56.4% for Alpha and Beta Gross determinations up to 84.9% for Gamma spectrometry determinations. These results shows that the best performance in radionuclide determination is reached in gamma spectrometry analyses and the worst in Alpha and Beta Gross determinations. This general behavior is similar to the one reached by other laboratories in international intercomparison programs. (author). 1 ref., 1 fig., 1 tab

Entrepreneur environment management behavior evaluation method derived from environmental economy.

Science.gov (United States)

Zhang, Lili; Hou, Xilin; Xi, Fengru

2013-12-01

Evaluation system can encourage and guide entrepreneurs, and impel them to perform well in environment management. An evaluation method based on advantage structure is established. It is used to analyze entrepreneur environment management behavior in China. Entrepreneur environment management behavior evaluation index system is constructed based on empirical research. Evaluation method of entrepreneurs is put forward, from the point of objective programming-theory to alert entrepreneurs concerned to think much of it, which means to take minimized objective function as comprehensive evaluation result and identify disadvantage structure pattern. Application research shows that overall behavior of Chinese entrepreneurs environmental management are good, specially, environment strategic behavior are best, environmental management behavior are second, cultural behavior ranks last. Application results show the efficiency and feasibility of this method. Copyright © 2013 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

An environmental impact measure for nuclear fuel cycle evaluation

International Nuclear Information System (INIS)

Ahn, Joonhong

2004-01-01

Review of the models and measures for repository performance assessment has revealed that dedicated measures for environmental impacts need to be developed for the purpose of nuclear-fuel-cycle evaluation from the viewpoint of environmental impact minimization. The present study proposes the total toxicity index of released radionuclides that have accumulated in the region exterior to the repository as an environmental impact measure. The measure is quantitatively evaluated by a radionuclide transport model that incorporates the effects of canister-array configuration and the initial mass loading in the waste canister. With the measure, it is demonstrated that the environmental impact of the repository can be effectively reduced by reduction of the initial mass loading and change in the canister-array configuration in the repository. Environmental impacts of the mill tailings and the depleted uranium are as important as those from the high-level radioactive wastes repository. For a fair comparison of various fuel cycles, the sum of these impacts should be compared. (author)

Contribution to the integration methodology of environment in the small and medium enterprises or industries: evaluation of environmental performances; Contribution a la methodologie d'integration de l'environnement dans les PME-PMI: evaluation des performances environnementales

Energy Technology Data Exchange (ETDEWEB)

Personne, M

1998-01-16

The integration of environmental criteria into industrial plants working is nowadays an obligation for companies. Implementation of an Environmental Management System (EMS) is a mean to integrate these criteria, and the system registration (by ISO 14001 or EMAS standards) enables companies to demonstrate the validity of their environmental behaviour to interested parties. Our experience in Small and Medium Enterprises (SMEs) has allowed us to note the inadequacy between their environmental integration level and EMS requirements. In addition to that, we have observed that environmental assessment methods, which could enable SMEs to make up for lost time, were not adapted to their specificities. However, two recent approaches are innovative: the first one is based on a progressive processes, the second one on an environmental information system, based on indicators construction. On the basis of existing methods study, improved with our SMEs experience, our approach consists of developing an environmental integration method, joining the progressive aspect (construction of a 'multi-phases' method) and the information treatment (exploitation of environmental data by indicators construction). We propose a four phases method, - environmental performance evaluation, internal and external results exploitation, process perpetuation -, setting up an information treatment system, by means of compliance, progress and monitoring indicators. Leading to implementation of an environmental performance continuous improvement cycle, this process enables companies to step forward EMS implementation. (author)

Environmental performance report - 1995

International Nuclear Information System (INIS)

1995-01-01

This first environmental performance report by Hydro-Quebec reviewed achievements in the field of environmental management to the end of 1995, based on guidelines set forth in 1994. Chapter One introduced Hydro-Quebec's main orientation in the field of environment and sustainable development. Chapter Two discussed the advantages of hydropower and the principal environmental issues associated with it. Questions pertaining to power system operation were discussed in Chapter Three, while Chapter Four was devoted to a discussion of achievements associated with sustainable development. Social commitments and environmental research were the topics discussed in Chapters Five and Six. tabs., figs

Assessing the state of environmental quality in cities – A multi-component urban performance (EMCUP) index

International Nuclear Information System (INIS)

Stossel, Zeev; Kissinger, Meidad; Meir, Avinoam

2015-01-01

Urban environmental quality indices can provide policy makers and the public with valuable information. However, common assessment tools have several shortcomings: most indices do leave out some important components of the state of urban environmental quality; they use a relative assessment in which urban environmental performance is evaluated relative to other cities, not against established environmental benchmarks; and only a few assessment tools compare urban performance to environmental quality standards. This paper presents a new multi component urban performance (EMCUP) index aiming to tackle those shortcomings. It analyses the overall state of urban environmental quality by using a list of indicators to evaluate key urban environmental quality topics such as air, water, open space, sanitation and solid waste. It presents an absolute score calculated in relation to both the standard and desired optimum levels. The use of the index is demonstrated by three Israeli cities. - Highlights: • The index provides a new framework for analyzing the overall urban environmental quality. • The index scores are calculated based on environmental standards and desired optimum benchmark values. • The paper demonstrates the gap between the state of existing urban environmental quality and the desired goals. - Introducing a multi component urban performance (EMCUP) index, which measures urban environmental quality related to environmental benchmarks.

A strategic management model for evaluation of health, safety and environmental performance.

Science.gov (United States)

Abbaspour, Majid; Toutounchian, Solmaz; Roayaei, Emad; Nassiri, Parvin

2012-05-01

Strategic health, safety, and environmental management system (HSE-MS) involves systematic and cooperative planning in each phase of the lifecycle of a project to ensure that interaction among the industry group, client, contractor, stakeholder, and host community exists with the highest level of health, safety, and environmental standard performances. Therefore, it seems necessary to assess the HSE-MS performance of contractor(s) by a comparative strategic management model with the aim of continuous improvement. The present Strategic Management Model (SMM) has been illustrated by a case study and the results show that the model is a suitable management tool for decision making in a contract environment, especially in oil and gas fields and based on accepted international standards within the framework of management deming cycle. To develop this model, a data bank has been created, which includes the statistical data calculated by converting the HSE performance qualitative data into quantitative values. Based on this fact, the structure of the model has been formed by defining HSE performance indicators according to the HSE-MS model. Therefore, 178 indicators have been selected which have been grouped into four attributes. Model output provides quantitative measures of HSE-MS performance as a percentage of an ideal level with maximum possible score for each attribute. Defining the strengths and weaknesses of the contractor(s) is another capability of this model. On the other hand, this model provides a ranking that could be used as the basis for decision making at the contractors' pre-qualification phase or during the execution of the project.

Environmental performance evaluation of hot water supplying systems for domestic use

OpenAIRE

Luiz Alexandre Kulay; Rafael Selvaggio Viñas; Ivanildo Hespanhol

2015-01-01

The consumption profile of Brazilian citizens is changing as alternatives are sought to reduce costs. A major focus of this change of attitude involves expenditures for electricity, particularly in relation to water heating systems. The manufacturers of these devices add value to their products beyond price. A usual strategy is the enhancement of the environmental performance of the product. This study compared four water heating systems: electric, gas, solar and hybrid, using an environmenta...

Hanford performance evaluation program for Hanford site analytical services

International Nuclear Information System (INIS)

Markel, L.P.

1995-09-01

The U.S. Department of Energy (DOE) Order 5700.6C, Quality Assurance, and Title 10 of the Code of Federal Regulations, Part 830.120, Quality Assurance Requirements, states that it is the responsibility of DOE contractors to ensure that ''quality is achieved and maintained by those who have been assigned the responsibility for performing the work.'' Hanford Analytical Services Quality Assurance Plan (HASQAP) is designed to meet the needs of the Richland Operations Office (RL) for maintaining a consistent level of quality for the analytical chemistry services provided by contractor and commmercial analytical laboratory operations. Therefore, services supporting Hanford environmental monitoring, environmental restoration, and waste management analytical services shall meet appropriate quality standards. This performance evaluation program will monitor the quality standards of all analytical laboratories supporting the Hanforad Site including on-site and off-site laboratories. The monitoring and evaluation of laboratory performance can be completed by the use of several tools. This program will discuss the tools that will be utilized for laboratory performance evaluations. Revision 0 will primarily focus on presently available programs using readily available performance evaluation materials provided by DOE, EPA or commercial sources. Discussion of project specific PE materials and evaluations will be described in section 9.0 and Appendix A

Environmental quality evaluation. Indexing tools to evaluate environmental quality from biological data, floristic and vegetational data in Ponte Galeria (Rome, Italy)

International Nuclear Information System (INIS)

Mazzocchi, F.; Castorina, M.; De Mei, M.

1998-01-01

In the present work the study of indexing tools to evaluate environmental quality from biological data has been performed using a certain number of floristic and vegetational indices near Macchia Grande of Ponte Galeria (Rome, Italy). The indices have been applied on the basis of the data coming from a phyto sociological study of the area. Multivariate statistics methodologies have been utilized to obtain a synthetic evaluation of the indices [it

Using information technology to measure, monitor and report on environmental performance

Energy Technology Data Exchange (ETDEWEB)

Ford, G.

1999-07-01

This article provides an overview of the process of environmental performance evaluation (EPE), including a discussion of the rationale and context for EPE as a key component of environmental management and sustainability metrics for businesses around the world. New and emerging developments, such as environmental performance benchmarking and standardized reporting, are highlighted. The ISO 14000 model for EPE and its environmental performance indicators is described. The article then discusses the need for new technology, including the Internet, to meet these new demands, and examines the important role of information technology in creating an efficient and effective system for the EPE process. In this regard, issues such as scaleability, data identification, data collection, reporting, user interface, integration and data warehousing are explored, and examples of the application of information technology to address these issues are provided. The article concludes with a discussion of the need to use emerging information technology to integrate various key types of performance information, including environmental, according to the balanced scorecard model for integrated business sustainability metrics. It concludes that such technology should be used now, even in the absence of global standards for performance metrics, and in spite of the theoretical and practical challenges in doing so, in order to move toward the important goal of achieving comprehensive sustainability metrics.

ENVIRONMENTAL EVALUATION FOR UTILIZATION OF ASH IN SOIL STABILIZATION

Energy Technology Data Exchange (ETDEWEB)

David J. Hassett; Loreal V. Heebink

2001-08-01

The Minnesota Pollution Control Agency (MPCA) approved the use of coal ash in soil stabilization, indicating that environmental data needed to be generated. The overall project goal is to evaluate the potential for release of constituents into the environment from ash used in soil stabilization projects. Supporting objectives are: (1) To ensure sample integrity through implementation of a sample collection, preservation, and storage protocol to avoid analyte concentration or loss. (2) To evaluate the potential of each component (ash, soil, water) of the stabilized soil to contribute to environmental release of analytes of interest. (3) To use laboratory leaching methods to evaluate the potential for release of constituents to the environment. (4) To facilitate collection of and to evaluate samples from a field runoff demonstration effort. The results of this study indicated limited mobility of the coal combustion fly ash constituents in laboratory tests and the field runoff samples. The results presented support previous work showing little to negligible impact on water quality. This and past work indicates that soil stabilization is an environmentally beneficial CCB utilization application as encouraged by the U.S. Environmental Protection Agency. This project addressed the regulatory-driven environmental aspect of fly ash use for soil stabilization, but the demonstrated engineering performance and economic advantages also indicate that the use of CCBs in soil stabilization can and should become an accepted engineering option.

Performance criteria for solidified high-level radioactive wastes. Environmental impact statement. Revision 1

International Nuclear Information System (INIS)

1977-09-01

This draft Environmental Impact Statement on performance criteria for solidified high-level radioactive wastes (PCSHLW) covers: considerations for PCSHLW development, the proposed rulemaking, characteristics of the PCSHLW, environmental impacts of the proposed PCSHLW, alternatives to the PCSHLW criteria, and cost/benefit/risk evaluation. Five appendices are included to support the technical data required in the Environmental Impact Statement

Pilot 2006 Environmental Performance Index (EPI)

Data.gov (United States)

National Aeronautics and Space Administration — The Pilot 2006 Environmental Performance Index (EPI) centers on two broad environmental protection objectives: (1) reducing environmental stresses on human health,...

The effect of environmental performance and preference disclosure on financial performance: Empirical evidence from unbalanced panel data of heavy-pollution industries in China

Directory of Open Access Journals (Sweden)

Kai Chang

2015-01-01

Full Text Available Purpose: Environmental performance and propensity disclosure is important for stakeholders to estimate firms’ incentives in environmental management practices. The purpose of this article is to explore the impacts of environmental performance and propensity disclosure on financial performance using unbalanced panel data of eight heavy-pollution industries in China. Design/methodology/approach: Environmental performance and propensity exhibits mutual causality relationship with Tobin’s Q value using unit root and co-integration test of panel data. Using panel data analysis, we take the impacts of environmental performance and propensity disclosure on financial performance from 2008 to 2012. Findings: Environmental performance has a significantly negative impact on Tobin’s Q value at the significance levels of 1%, while environmental propensity has a significantly positive effect on Tobin’s Q value at the significance levels of 5%. Firm size, financial leverage and return of assets have significantly positive impacts on financial performance at the significance levels of 1%. Meanwhile the effect of corporate environmental performance and propensity on financial performance has a significantly periodic difference from 2008 to 2012. Research limitations/implications: Those results are helpful for environmental regulators to evaluate the implementing effect of voluntary environmental policy and for firms’ managers to increase market expectation and improve financial performance. Originality/value: Environmental performance is estimated by 30 environmental indicators in eight heavy-pollution industries in China. Environmental performance and propensity disclosure has a U-typed relationship with financial performance.

Integrating environmental and economic performance to assess modern silvoarable agroforestry in Europe

NARCIS (Netherlands)

Palma, J.; Graves, A.R.; Burgess, P.J.; Werf, van der W.; Herzog, F.

2007-01-01

The environmental and economic performance of silvoarable agroforestry in Europe is highly variable. Multi-criteria analysis, using the PROMETHEE outranking approach, was used to evaluate the integrated performance of silvoarable agroforestry on hypothetical farms in nineteen landscape test sites in

Variability of building environmental assessment tools on evaluating carbon emissions

Energy Technology Data Exchange (ETDEWEB)

Ng, S. Thomas, E-mail: tstng@hkucc.hku.hk; Chen Yuan, E-mail: chenyuan4@gmail.com; Wong, James M.W., E-mail: jmwwong@hku.hk

2013-01-15

With an increasing importance of sustainability in construction, more and more clients and designers employ building environmental assessment (BEA) tools to evaluate the environmental friendliness of their building facilities, and one important aspect of evaluation in the BEA models is the assessment of carbon emissions. However, in the absence of any agreed framework for carbon auditing and benchmarking, the results generated by the BEA tools might vary significantly which could lead to confusion or misinterpretation on the carbon performance of a building. This study thus aims to unveil the properties of and the standard imposed by the current BEA models on evaluating the life cycle carbon emissions. The analyses cover the (i) weighting of energy efficiency and emission levels among various environmental performance indicators; (ii) building life cycle stages in which carbon is taken into consideration; (iii) objectiveness of assessment; (iv) baseline set for carbon assessment; (v) mechanism for benchmarking the emission level; and (v) limitations of the carbon assessment approaches. Results indicate that the current BEA schemes focus primarily on operational carbon instead of the emissions generated throughout the entire building life cycle. Besides, the baseline and benchmark for carbon evaluation vary significantly among the BEA tools based on the analytical results of a hypothetical building. The findings point to the needs for a more transparent framework for carbon auditing and benchmarking in BEA modeling. - Highlights: Black-Right-Pointing-Pointer Carbon emission evaluation in building environmental assessment schemes are studied. Black-Right-Pointing-Pointer Simulative carbon emission is modeled for building environmental assessment schemes. Black-Right-Pointing-Pointer Carbon assessments focus primarily on operational stage instead of entire lifecycle. Black-Right-Pointing-Pointer Baseline and benchmark of carbon assessment vary greatly among BEA

Variability of building environmental assessment tools on evaluating carbon emissions

International Nuclear Information System (INIS)

Ng, S. Thomas; Chen Yuan; Wong, James M.W.

2013-01-01

With an increasing importance of sustainability in construction, more and more clients and designers employ building environmental assessment (BEA) tools to evaluate the environmental friendliness of their building facilities, and one important aspect of evaluation in the BEA models is the assessment of carbon emissions. However, in the absence of any agreed framework for carbon auditing and benchmarking, the results generated by the BEA tools might vary significantly which could lead to confusion or misinterpretation on the carbon performance of a building. This study thus aims to unveil the properties of and the standard imposed by the current BEA models on evaluating the life cycle carbon emissions. The analyses cover the (i) weighting of energy efficiency and emission levels among various environmental performance indicators; (ii) building life cycle stages in which carbon is taken into consideration; (iii) objectiveness of assessment; (iv) baseline set for carbon assessment; (v) mechanism for benchmarking the emission level; and (v) limitations of the carbon assessment approaches. Results indicate that the current BEA schemes focus primarily on operational carbon instead of the emissions generated throughout the entire building life cycle. Besides, the baseline and benchmark for carbon evaluation vary significantly among the BEA tools based on the analytical results of a hypothetical building. The findings point to the needs for a more transparent framework for carbon auditing and benchmarking in BEA modeling. - Highlights: ► Carbon emission evaluation in building environmental assessment schemes are studied. ► Simulative carbon emission is modeled for building environmental assessment schemes. ► Carbon assessments focus primarily on operational stage instead of entire lifecycle. ► Baseline and benchmark of carbon assessment vary greatly among BEA schemes. ► A more transparent and comprehensive framework for carbon assessment is required.

Environmental indicators for evaluating properties

Directory of Open Access Journals (Sweden)

Mario Grosso

2015-06-01

Full Text Available Property evaluation for tax purposes has traditionally relied on urban and building criteria, mostly resulting from concepts driven by the commercial attractiveness of the property under evaluation, its building and the site itself. Due to the world climate and ecological crisis, awareness has risen about the need for other indicators, which can evaluate the quality of a property, even referring to its potential environmental impact. Technical standards for the evaluation of buildings’ environmental sustainability, which have been developed since the first years of this century, both nationally and internationally, take into account the impact of the building and its relevance for the life-cycle of materials and elements, with reference to the three sectors of sustainability: environmental, economic and social. The social sector includes indicators referring to the user’s health and comfort, which also interact with the morphological and spatial characteristics of the building. However, there is a lack of methodological tools for the evaluation of said indicators and existing ones are mainly of a qualitative type. This paper suggests a methodological approach for the quantitative evaluation of sustainability indicators, relying on the accessibility of a site’s climate resources by the property, as a criterion to evaluate the potential for the reduction of negative environmental impact, as well as a criterion to improve users’ life quality.

Environmental Management Performance Report 11/1999

Energy Technology Data Exchange (ETDEWEB)

EDER, D.M.

2000-02-01

The purpose of the Environmental Management Performance Report (EMPR) is to provide the Department of Energy Richland Operations Office's (DOE-RL's) report of Hanford's Environmental Management performance by: US Department of Energy, Richland Operation

39 CFR 775.8 - Environmental evaluation guidelines.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Environmental evaluation guidelines. 775.8 Section 775.8 Postal Service UNITED STATES POSTAL SERVICE ENVIRONMENTAL REGULATIONS NATIONAL ENVIRONMENTAL POLICY ACT PROCEDURES § 775.8 Environmental evaluation guidelines. (a) Approach. When dealing with...

An evaluation of the ecological and environmental security on China's terrestrial ecosystems.

Science.gov (United States)

Zhang, Hongqi; Xu, Erqi

2017-04-11

With rapid economic growth, industrialization, and urbanization, various ecological and environmental problems occur, which threaten and undermine the sustainable development and domestic survival of China. On the national scale, our progress remains in a state of qualitative or semi-quantitative evaluation, lacking a quantitative evaluation and a spatial visualization of ecological and environmental security. This study collected 14 indictors of water, land, air, and biodiversity securities to compile a spatial evaluation of ecological and environmental security in terrestrial ecosystems of China. With area-weighted normalization and scaling transformations, the veto aggregation (focusing on the limit indicator) and balanced aggregation (measuring balanced performance among different indicators) methods were used to aggregate security evaluation indicators. Results showed that water, land, air, and biodiversity securities presented different spatial distributions. A relatively serious ecological and environmental security crisis was found in China, but presented an obviously spatial variation of security evaluation scores. Hotspot areas at the danger level, which are scattered throughout the entirety of the country, were identified. The spatial diversities and causes of ecological and environmental problems in different regions were analyzed. Spatial integration of regional development and proposals for improving the ecological and environmental security were put forward.

A guide for evaluating the environmental performance of Product/Service-Systems

DEFF Research Database (Denmark)

Kjær, Louise Laumann; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

Environmental issues, such as climate change, resource depletion and pollution are societal concerns, which are also increasingly affecting the way we do business. Concepts such as circular economy,sharing economy, and service economy, often highlight that more sustainable businesses can be created...... when focusing on product performance (e.g.by offering lighting as a service) rather than the physical products (e.g. by selling light bulbs). Such strategies of integrating products and services to deliver required user functionality are often termed Product/Service-Systems (PSS). This guide...

7 CFR 650.5 - Environmental evaluation in planning.

Science.gov (United States)

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Environmental evaluation in planning. 650.5 Section...-Assisted Programs § 650.5 Environmental evaluation in planning. (a) General. Environmental evaluation (EE) integrates environmental concerns throughout the planning, installation, and operation of NRCS-assisted...

Extended Producer Responsibility and corporate performance: Effects of environmental regulation and environmental strategy.

Science.gov (United States)

Peng, Benhong; Tu, Yu; Elahi, Ehsan; Wei, Guo

2018-07-15

While contemporary manufacturing technologies stimulate the industrial revolution and promote the rapidly changing global economy, it has caused enormous environmental negative externalities and managing the industrial waste remains a primary challenge, especially for fast developing countries such as China. Though existing studies explored the influence of Extended Producer Responsibility (EPR) legislations on environmental externalities, only fewer researches aimed at policy issues. Particularly, the relationship among environmental regulations, environmental strategies and corporate performance in the EPR system has not been deeply investigated. To fill this gap, this research will focus to assess the economic aspect and environmental performance associated with the environmental regulations and strategies. For this purpose, 208 cross-sectional questionnaires were administered with three major high-pollution industries, electrical and electronic, automobile and lead-acid storage battery industries. To accomplish this study objective, we employ a two-step approach: firstly, validity tests for environmental regulation and environmental strategy along with the corporate performance are performed by the factor analysis method, and secondly, the structural equation model is utilized to test the study hypotheses. Results reveal that command and control (CAC) and market-based incentive (MBI) environmental regulations are significantly impacting on the reactive environmental strategy (RES); however, the proactive environmental strategy (PES) only has a significant relationship with MBI regulation. On the other hand, RES only has a significant relationship with the enterprises economics performance, while PES has a statistically significant relationship with both economic and environmental performance of enterprises. Therefore, the central government and its local offices are strongly urged to coordinate the industries by making, implementing and monitoring necessary and

Environmental Management Performance Report April 2000

Energy Technology Data Exchange (ETDEWEB)

EDER, D.M.

2000-04-01

The purpose of the Environmental Management Performance Report (EMPR) is to provide the Department of Energy Richland Operations Office's (DOE-RL's) report of Hanford's Environmental Management (EM) performance by: Project Hanford Management Contract (PHMC) through Fluor Hanford, Inc. (FHI) and its subcontractors; Environmental Restoration Contract through Bechtel Hanford, Inc. (BHI), and its subcontractors; Pacific Northwest National Laboratories (PNNL) for EM and EM Science and Technology (S and T) Mission; and Office of Safety Regulation of the TWRS Privatization Contractor. This report is a monthly publication that summarizes EM Site performance under RL Operations Office. It is organized by the four sections listed above, with each section containing an Executive Summary and Area Performance Summaries.

2014 Environmental Performance Index (EPI)

Data.gov (United States)

National Aeronautics and Space Administration — The 2014 Environmental Performance Index (EPI) ranks 178 countries on 20 performance indicators in the following 9 policy categories: health impacts, air quality,...

2016 Environmental Performance Index (EPI)

Data.gov (United States)

National Aeronautics and Space Administration — The 2016 Environmental Performance Index (EPI) ranks 180 countries on 20 performance indicators in the following 9 policy categories: health impacts, air quality,...

Firm performance and the role of environmental management.

Science.gov (United States)

Lundgren, Tommy; Zhou, Wenchao

2017-12-01

This paper analyzes the interactions between three dimensions of firm performance - productivity, energy efficiency, and environmental performance - and especially sheds light on the role of environmental management. In this context, environmental management is investments to reduce environmental impact, which may also affect firm competitiveness, in terms of change in productivity, and spur more (or less) efficient use of energy. We apply data envelopment analysis (DEA) technique to calculate the Malmquist firm performance indexes, and a panel vector auto-regression (VAR) methodology is utilized to investigate the dynamic and causal relationship between the three dimensions of firm performance and environmental investment. Main results show that energy efficiency and environmental performance are integrated, and energy efficiency and productivity positively reinforce each other, signifying the cost saving property of more efficient use of energy. Hence, increasing energy efficiency, as advocated in many of today's energy policies, could capture multiple benefits. The results also show that improved environmental performance and environmental investments constrain next period productivity, a result that would be in contrast with the Porter hypothesis and strategic corporate social responsibility; both concepts conveying the notion that pro-environmental management can boost productivity and competitiveness. Copyright © 2017 Elsevier Ltd. All rights reserved.

Environmental Management Performance Report November 2000

Energy Technology Data Exchange (ETDEWEB)

EDER, D.M.

2000-11-01

The purpose of the Environmental Management Performance Report (EMPR) is to provide the Department of Energy Richland Operations Office's (DOE-RL's) report of Hanford's Environmental Management (EM) performance by: Project Hanford Management Contract (PHMC) through Fluor Hanford, Inc. (FH) and its subcontractors; Environmental Restoration Contract through Bechtel Hanford, Inc. (BHI), and its subcontractors; Pacific Northwest National Laboratories (PNNL) for Science and Technology support to the EM Mission; and Office of Safety Regulation of the TWRS Privatization Contractor. This report is a monthly publication that summarizes EM Site performance under RL Operations Office. It is organized by the four sections listed above, with each section containing an Executive Summary and Area Performance Summaries. A glossary of terms is provided at the end of this report for reference purposes.

Model to Evaluate Pro-Environmental Consumer Practices

Directory of Open Access Journals (Sweden)

Wendolyn Aguilar-Salinas

2017-02-01

Full Text Available The consumer plays a key role in resource conservation; therefore, it is important to know consumer behavior to identify consumer profiles and to promote pro-environmental practices in society that encourage resource conservation and reductions in waste generation. The purpose of this paper is to implement a fuzzy model to evaluate consumer behavior in relation to three pro-environmental practices that can be implemented at the household level, including reductions in resource consumption (reduce, reuse of resources (reuse, and recycling (recycle. To identify socio-demographic profiles that characterize an environmentally responsible consumer, 2831 surveys were applied on a representative sample of consumers residing in a Mexican city. Fuzzy logic and neural networks were applied using a Sugeno-type subtractive clustering to determine each profile. The model input variables were socioeconomic status, age, education level, monthly income, occupation and the type of organizations with which the consumer is affiliated. The output variables were represented by pro-environmental practices. Results show that the consumer practices are performed independently of each other, with the most frequent pro-environmental consumer practices being reduction and reuse.

Operational and environmental performance in China's thermal power industry: Taking an effectiveness measure as complement to an efficiency measure.

Science.gov (United States)

Wang, Ke; Zhang, Jieming; Wei, Yi-Ming

2017-05-01

The trend toward a more fiercely competitive and strictly environmentally regulated electricity market in several countries, including China has led to efforts by both industry and government to develop advanced performance evaluation models that adapt to new evaluation requirements. Traditional operational and environmental efficiency measures do not fully consider the influence of market competition and environmental regulations and, thus, are not sufficient for the thermal power industry to evaluate its operational performance with respect to specific marketing goals (operational effectiveness) and its environmental performance with respect to specific emissions reduction targets (environmental effectiveness). As a complement to an operational efficiency measure, an operational effectiveness measure not only reflects the capacity of an electricity production system to increase its electricity generation through the improvement of operational efficiency, but it also reflects the system's capability to adjust its electricity generation activities to match electricity demand. In addition, as a complement to an environmental efficiency measure, an environmental effectiveness measure not only reflects the capacity of an electricity production system to decrease its pollutant emissions through the improvement of environmental efficiency, but it also reflects the system's capability to adjust its emissions abatement activities to fulfill environmental regulations. Furthermore, an environmental effectiveness measure helps the government regulator to verify the rationality of its emissions reduction targets assigned to the thermal power industry. Several newly developed effectiveness measurements based on data envelopment analysis (DEA) were utilized in this study to evaluate the operational and environmental performance of the thermal power industry in China during 2006-2013. Both efficiency and effectiveness were evaluated from the three perspectives of operational

Evaluation of environmental impact of air pollution sources

Energy Technology Data Exchange (ETDEWEB)

Holnicki, P. [Polish Academy of Science, Warsaw (Poland). Systems Research Inst.

2004-10-15

This paper addresses the problem of evaluation and comparison of environmental impact of emission sources in the case of a complex, multisource emission field. The analysis is based on the forecasts of a short-term, dynamic dispersion model. The aim is to get a quantitative evaluation of the contribution of the selected sources according to the predefined, environmental cost function. The approach utilizes the optimal control technique for distributed parameter systems. The adjoint equation, related to the main transport equation of the forecasting model, is applied to calculate the sensitivity of the cost function to the emission intensity of the specified sources. An example implementation of a regional-scale, multilayer dynamic model of SOx transport is discussed as the main forecasting tool. The test computations have been performed for a set of the major power plants in a selected industrial region of Poland.

Evaluating public participation in environmental decision-making: EPA's superfund community involvement program.

Science.gov (United States)

Susan Charnley; Bruce. Engelbert

2005-01-01

This article discusses an 8-year, ongoing project that evaluates the Environmental Protection Agency's Superfund community involvement program. The project originated as a response to the Government Performance and Results Act, which requires federal agencies to articulate program goals, and evaluate and report their progress in meeting those goals. The evaluation...

Development of an environmental chamber for evaluating the performance of low-cost air quality sensors under controlled conditions

Science.gov (United States)

Papapostolou, Vasileios; Zhang, Hang; Feenstra, Brandon J.; Polidori, Andrea

2017-12-01

A state-of-the-art integrated chamber system has been developed for evaluating the performance of low-cost air quality sensors. The system contains two professional grade chamber enclosures. A 1.3 m3 stainless-steel outer chamber and a 0.11 m3 Teflon-coated stainless-steel inner chamber are used to create controlled aerosol and gaseous atmospheres, respectively. Both chambers are temperature and relative humidity controlled with capability to generate a wide range of environmental conditions. The system is equipped with an integrated zero-air system, an ozone and two aerosol generation systems, a dynamic dilution calibrator, certified gas cylinders, an array of Federal Reference Method (FRM), Federal Equivalent Method (FEM), and Best Available Technology (BAT) reference instruments and an automated control and sequencing software. Our experiments have demonstrated that the chamber system is capable of generating stable and reproducible aerosol and gas concentrations at low, medium, and high levels. This paper discusses the development of the chamber system along with the methods used to quantitatively evaluate sensor performance. Considering that a significant number of academic and research institutions, government agencies, public and private institutions, and individuals are becoming interested in developing and using low-cost air quality sensors, it is important to standardize the procedures used to evaluate their performance. The information discussed herein provides a roadmap for entities who are interested in characterizing air quality sensors in a rigorous, systematic and reproducible manner.

Method for evaluating environmental performance of technologies by using the interindustry relations table; Sangyo renkanhyo wo mochiita gijutsu no kankyosei hyoka shuho

Energy Technology Data Exchange (ETDEWEB)

Hondo, Y. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

1997-01-30

This paper describes a proposal of a method for evaluating environmental performance of technologies by using the interindustry relations table, and the case studies thereof. This method is characterized in that it can evaluate two effects affecting the environment: structuring of capital facilities required in association with introduction of the technologies and the changes in social structures. As a parameter to compare the technologies considering these effects, a concept of life cycle limited emission amount was introduced. In the case studies, life cycle limited CO2 emission amounts from using seven kinds of technologies were calculated, and environmental performances of each technology were compared. The result indicated that introduction in Japan of coal, oil and LNG fired thermal power generation will increase CO2 emission amount from the whole society. Conversely, introduction of hydraulic, nuclear, photovoltaic, and wind power generation technologies will reduce the CO2 emission amount. It is pointed out particularly that hydraulic and nuclear power generation can minimize CO2 emission from structuring capital facilities, and is an excellent technology from a viewpoint of reducing CO2 emission from the society as a whole. 5 refs., 6 figs., 1 tab.

Performance appraisal for green/environmental friendliness of a supply chain department

Directory of Open Access Journals (Sweden)

Solomon Olasunkanmi Odeyale

2014-10-01

Full Text Available Purpose: This paper aims at proposing a method for evaluating the environmental friendliness of a supply chain department in any organization. Supply chain involves activities that could affect the natural environment and if these activities are not properly evaluated and monitored, it could affect the natural environment and also generate ecological performance change. Design/methodology/approach: The model for the appraisal consists of 5 criteria and 30 subcriteria. The method is applied at 3 level; beginning with finding the relative weight of the subcriteria under each criterion using Analytic Hierarchy Process (AHP, followed by computing the value associated with each level descriptor in a scale. Some subcriteria have 5 level descriptors (very strong/moderate /weak/very weak / no, some subcriteria have 3 level descriptors (always / sometimes/ never and some have 2 levels descriptor (yes/no. Finally the method is concluded by the means of an additive model, whereby the weight associated with each subcriteria is multiplied by the corresponding level descriptor and summed up to get the limit/state. This methodology is called the weighing multiplication and additive model (WMAAM. Finding: Supply chain (SC involves operational activities and for these activities to be environmental friendly, they have been categorized under criteria namely; green design, green procurement, green manufacturing, environmental management and green marketing. These criteria which consist of 30 subcriteria are evaluated in other to compute the overall environmental friendly appraisal of the SC department. Practical Implication: The study plays important role in understanding various areas to be monitored and considered during supply chain activities in order to achieve a green supply chain management or an environmental friendly supply chain. Originality/value: The main contribution of this work is to propose an effective methodology that guides SC practitioners on

Corporate sustainability: environmental, social, economic and corporate performance

Directory of Open Access Journals (Sweden)

Alena Kocmanová

2011-01-01

Full Text Available The article deals with corporate sustainability and environmental and social issues of the integration of corporate performance measurement that may lead to sustainable economic success. Sustainability is a strategy of the process of sustainable development. Sustainability of businesses and sustainable performance can be defined as an integration of environmental, social and economic performance. First and foremost, businesses will want to know what indicators can be used to measure environmental, social and economic performance. What is the mutual relationship between environmental, social and economic performance? How can firms arrive at a comprehensive assessment of their performance in relation to sustainability? The aim of this paper is to analyze corporate environmental, social and economic performance and to analyze their mutual relationships. The final part of the article is an assessment of the contemporary situation and draft Key Performance Indicators (KPI for assessment of corporate sustainability that will be the subject of further research in a selected NACE-CZ sector and in accordance with Corporate Sustainability Reporting. KPI provide businesses with a means of measuring progress toward achieving objectives.

Evaluation of the environmental impact in Mexico

International Nuclear Information System (INIS)

Mendoza, O.

2004-01-01

The present work, shows the origin and development of the evaluation of the environmental impact in Mexico, like juridical-environmental instrument, it is the environmental politics' s instrument that is relatively new, with the time it has suffered modifications of technical, administrative, law and conceptual nature. It has changed in substantial form, its importance inside the general outline of protection of the natural resources of Mexico, which is reflected in the structure of the organisms that are responsible for applying it. The objectives of the work embrace describing the antecedents of the evaluation of the environmental impact, to provide a reference mark, and to observe the evolution of this juridical instrument, as well as to summarize more outstanding aspects of the evaluation of the environmental impact; making emphasis in the form like it has been related with the environmental politics' s instruments; and to point out the changes that the procedure of evaluation of the environmental impact has fomented in the development outlines, in the technology and even in the human thought. The results of the evaluation and dictamination of the projects that entered to the procedure of environmental impact in the period 1995-2000 are observed that of the 6,100 entered projects, 5,533 were resolved, which means that answer was given to 91% of the total of projects that entered; of the work it can be concluded that this juridical-environmental instrument, it has evolved with the step of the time and it has left adapting according to the juridical, administrative procedures, technicians and of sustainable development of Mexico

Establishment and application of performance evaluation model for collection and transportation system of municipal solid waste

Institute of Scientific and Technical Information of China (English)

彭绪亚; 林晓东; 贾传兴; 王渝昆; 黄媛媛

2009-01-01

On the basis of analyzing the typical waste collection and transportation mode,the evaluation index system for performance of the waste collection and transportation system was proposed with three grades,which related to six factors,such as economic evaluation,high efficient evaluation,environmental impact assessment,resource evaluation,evaluation of security and emergency,evaluation of management and society. With the performance evaluation theory,the performance evaluation model of waste collection and transportation system was constructed,which quantified the grading standard of index and determined the index weight in analytic hierarchy process (AHP). After evaluating the waste collection and transportation system of the main districts of Chongqing city,the results show that the it has an excellent performance evaluation grade with very high performance level of three indices involving evaluation of management and society,environmental impact assessment,evaluation of security and emergency and quite low performance level of two indices that include high efficient evaluation and economic evaluation.

78 FR 41926 - Proposed Information Collection Request; Comment Request; Performance Evaluation Studies on...

Science.gov (United States)

2013-07-12

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OECA-2013-0413; FRL--9832-8] Proposed Information Collection Request; Comment Request; Performance Evaluation Studies on Wastewater Laboratories (Renewal); EPA... request (ICR), ``Performance Evaluation Studies on Wastewater Laboratories'' (EPA ICR No. 0234.11, OMB...

Time compression diseconomies in environmental management: the effect of assimilation on environmental performance.

Science.gov (United States)

Lannelongue, Gustavo; Gonzalez-Benito, Javier; Gonzalez-Benito, Oscar; Gonzalez-Zapatero, Carmen

2015-01-01

This research addresses the relationship between an organisation's assimilation of its environmental management system (EMS), the experience it gains through it, and its environmental performance. Assimilation here refers to the degree to which the requirements of the management standard are integrated within a plant's daily operations. Basing ourselves on the heterogeneity of organisations, we argue that assimilation and experience will inform environmental performance. Furthermore, we posit that the relationship between assimilation and environmental performance depends on experience. The attempt to obtain greater assimilation in a shorter time leads an organisation to record a poorer environmental outcome, which we shall refer to as time compression diseconomies in environmental management. We provide empirical evidence based on 154 plants pertaining to firms in Spain subject to the European Union's CO2 Emissions Trading System. Copyright © 2014 Elsevier Ltd. All rights reserved.

An integrated environmental and health performance quantification model for pre-occupancy phase of buildings in China

Energy Technology Data Exchange (ETDEWEB)

Li, Xiaodong, E-mail: eastdawn@tsinghua.edu.cn; Su, Shu, E-mail: sushuqh@163.com; Zhang, Zhihui, E-mail: zhzhg@tsinghua.edu.cn; Kong, Xiangqin, E-mail: kxlwq@126.com

2017-03-15

To comprehensively pre-evaluate the damages to both the environment and human health due to construction activities in China, this paper presents an integrated building environmental and health performance (EHP) assessment model based on the Building Environmental Performance Analysis System (BEPAS) and the Building Health Impact Analysis System (BHIAS) models and offers a new inventory data estimation method. The new model follows the life cycle assessment (LCA) framework and the inventory analysis step involves bill of quantity (BOQ) data collection, consumption data formation, and environmental profile transformation. The consumption data are derived from engineering drawings and quotas to conduct the assessment before construction for pre-evaluation. The new model classifies building impacts into three safeguard areas: ecosystems, natural resources and human health. Thus, this model considers environmental impacts as well as damage to human wellbeing. The monetization approach, distance-to-target method and panel method are considered as optional weighting approaches. Finally, nine residential buildings of different structural types are taken as case studies to test the operability of the integrated model through application. The results indicate that the new model can effectively pre-evaluate building EHP and the structure type significantly affects the performance of residential buildings.

An integrated environmental and health performance quantification model for pre-occupancy phase of buildings in China

International Nuclear Information System (INIS)

Li, Xiaodong; Su, Shu; Zhang, Zhihui; Kong, Xiangqin

2017-01-01

To comprehensively pre-evaluate the damages to both the environment and human health due to construction activities in China, this paper presents an integrated building environmental and health performance (EHP) assessment model based on the Building Environmental Performance Analysis System (BEPAS) and the Building Health Impact Analysis System (BHIAS) models and offers a new inventory data estimation method. The new model follows the life cycle assessment (LCA) framework and the inventory analysis step involves bill of quantity (BOQ) data collection, consumption data formation, and environmental profile transformation. The consumption data are derived from engineering drawings and quotas to conduct the assessment before construction for pre-evaluation. The new model classifies building impacts into three safeguard areas: ecosystems, natural resources and human health. Thus, this model considers environmental impacts as well as damage to human wellbeing. The monetization approach, distance-to-target method and panel method are considered as optional weighting approaches. Finally, nine residential buildings of different structural types are taken as case studies to test the operability of the integrated model through application. The results indicate that the new model can effectively pre-evaluate building EHP and the structure type significantly affects the performance of residential buildings.

Product-related Environmental Performance Indicators: a systematic literature review

DEFF Research Database (Denmark)

Issa, Isabela I.; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2013-01-01

Ecodesign is a proactive environmental management approach employed in the product development process (PDP) which aims to minimize the environmental impacts caused during products’ life-cycle, improving its environmental performance. The establishment of measurable environmental performance...

Environmental policy performance revisited

DEFF Research Database (Denmark)

Daugbjerg, Carsten; Sønderskov, Kim Mannemar

2012-01-01

. On the basis of the typology, a hypothesis on their ability to expand green markets is generated and tested in a comparative analysis of the performance of organic food policies in Denmark, Sweden, the UK and the US, focusing on their impact on organic consumption. Our analysis demonstrates that cross......Studies of environmental policy performance tend to concentrate on the impact of particular policy institutions or of single policy instruments. However, environmental policies most often consist of a package of policy instruments. Further, these studies pay no or very little attention to policy...... instruments directed at the demand side of the market. Therefore this article develops a policy typology for government intervention aimed at creating green markets. The typology distinguishes between four types of policy based on the balance between the supply-side and demand-side policy instruments...

Evaluation of Underwater Image Enhancement Algorithms under Different Environmental Conditions

Directory of Open Access Journals (Sweden)

Marino Mangeruga

2018-01-01

Full Text Available Underwater images usually suffer from poor visibility, lack of contrast and colour casting, mainly due to light absorption and scattering. In literature, there are many algorithms aimed to enhance the quality of underwater images through different approaches. Our purpose was to identify an algorithm that performs well in different environmental conditions. We have selected some algorithms from the state of the art and we have employed them to enhance a dataset of images produced in various underwater sites, representing different environmental and illumination conditions. These enhanced images have been evaluated through some quantitative metrics. By analysing the results of these metrics, we tried to understand which of the selected algorithms performed better than the others. Another purpose of our research was to establish if a quantitative metric was enough to judge the behaviour of an underwater image enhancement algorithm. We aim to demonstrate that, even if the metrics can provide an indicative estimation of image quality, they could lead to inconsistent or erroneous evaluations.

Environmental Performance and Financing Decisions Impact on Sustainable Financial Development of Chinese Environmental Protection Enterprises

Directory of Open Access Journals (Sweden)

Kai Quan Zhang

2017-12-01

Full Text Available Environmental protection firms need to improve their ability to access financing while maintaining good economic performance under mounting environmental pressures. After the integration of trade-off and stakeholder theories, we have constructed a number of mathematical models to investigate the relationship among financing decisions, environmental performance (EP, and economic performance. Unbalanced panel data from environmental protection companies listed on Chinese stock exchanges from 2007 to 2016 were collected and analyzed. Our results have confirmed that debt financing has a significant impact on short- and long-term economic performance. Firms prefer long-term debt over short-term debt to improve their financial sustainability. Internal financing is positively related to performance because the cost of financing is lower. Environmental performance can cause extra financial burden in the short run, but will improve stakeholder relations and profitability in the long run. Our study suggests that environmental performance affects the relationship between financing decisions and economic performance. When EP initiatives are high, debt financing has a greater negative influence on short-term performance, and the effect on long-term performance is mitigated. High EP also reduces the impact of internal financing on performance.

Environmental management and firm performance: a case study.

Science.gov (United States)

Claver, Enrique; López, María D; Molina, José F; Tarí, Juan J

2007-09-01

This study has as its aim to help to clarify the relationship between environmental management and economic performance by integrating it into a wider framework that includes the relationship between environmental strategy and firm performance, the latter being understood as the combination of environmental performance, competitive advantage and economic performance. A case study of the COATO farming cooperative showed us that its environmental management, focused on prevention logic, has had a positive net effect on its environmental performance. Besides, the order in which these practices were adopted favoured the development of new organisational capabilities that have contributed to the appearance of advantages derived from the greater accumulated experience of employees in creating new projects that are designed to reduce residues and pollution. COATO has also obtained a competitive advantage in differentiation thanks to an improved brand image and to its increased credibility in business relationships. Finally, a positive correlation exists between the pioneering proactive strategy adopted by this cooperative and the improvement of its firm performance with respect to the other firms in its sector.

Performance appraisal for green/environmental friendliness of a supply chain department

OpenAIRE

Odeyale, Solomon Olasunkanmi

2014-01-01

Purpose: This paper aims at proposing a method for evaluating the environmental friendliness of a supply chain department in any organization. Supply chain involves activities that could affect the natural environment and if these activities are not properly evaluated and monitored, it could affect the natural environment and also generate ecological performance change. Design/methodology/approach: The model for the appraisal consists of 5 criteria and 30 subcriteria. The method is applied at...

Environmental performance reviews. Republic of Moldova

International Nuclear Information System (INIS)

1998-01-01

This environmental performance review document for Moldova presents assessments of existing environmental policies; management of air, water and land pollutions originating from various sources including energy production and utilization. It also contains policy recommendations foe implementation by Moldovan Government

75 FR 63177 - Availability of FY 09 Grantee Performance Evaluation Reports for the Eight States of EPA Region 4...

Science.gov (United States)

2010-10-14

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9213-6] Availability of FY 09 Grantee Performance Evaluation... (EPA). ACTION: Notice of availability; Clean Air Act Section 105 grantee performance evaluation reports...-year evaluations of eight state air pollution control programs (Alabama Department of Environmental...

Performance Measurement und Environmental Performance Measurement

OpenAIRE

Sturm, Anke

2000-01-01

Die Zielsetzung der vorliegenden Dissertationsschrift besteht in der Entwicklung einer systematisierten Vorgehensweise, eines Controllingmodells, zur unternehmensinternen Umweltleistungsmessung. Das entwickelte Environmental Performance Measurement (EPM)-Modell umfaßt die fünf Stufen Festlegung der Ziele der Umweltleistungsmessung (1. Stufe), Erfassung der Umwelteinflüsse nach der ökologischen Erfolgsspaltung (2. Stufe), Bewertung der Umwelteinflüsse auf der Grundlage des qualitätszielbezogen...

ENVIRONMENTAL PERFORMANCE AS A REFLECTION OF MARKET DEMANDS

Directory of Open Access Journals (Sweden)

Wahyu Yun Santoso

2008-02-01

Full Text Available This paper focuses on the concept of corporate social responsibilities (CSR, particularly its implementation on environmental issues. The main question aimed to be answered is on how can environmental performance be adequately signaled to the market? It assumes by performing proper environmental performance, companies could benefit from financial incentive for future improvement and reputation benefit for the companies’ image, which eventually influence the bargaining position of companies in the market.

Challenges and Opportunities for Evaluating Environmental Education Programs

Science.gov (United States)

Carleton-Hug, Annelise; Hug, J. William

2010-01-01

Environmental education organizations can do more to either institute evaluation or improve the quality of their evaluation. In an effort to help evaluators bridge the gap between the potential for high quality evaluation systems to improve environmental education, and the low level of evaluation in actual practice, we reviewed recent…

Environmental performances of Sardinian dairy sheep production systems at different input levels.

Science.gov (United States)

Vagnoni, E; Franca, A; Breedveld, L; Porqueddu, C; Ferrara, R; Duce, P

2015-01-01

Although sheep milk production is a significant sector for the European Mediterranean countries, it shows serious competitiveness gaps. Minimizing the ecological impacts of dairy sheep farming systems could represent a key factor for farmers to bridging the gaps in competitiveness of such systems and also obtaining public incentives. However, scarce is the knowledge about the environmental performance of Mediterranean dairy sheep farms. The main objectives of this paper were (i) to compare the environmental impacts of sheep milk production from three dairy farms in Sardinia (Italy), characterized by different input levels, and (ii) to identify the hotspots for improving the environmental performances of each farm, by using a Life Cycle Assessment (LCA) approach. The LCA was conducted using two different assessment methods: Carbon Footprint-IPCC and ReCiPe end-point. The analysis, conducted "from cradle to gate", was based on the functional unit 1 kg of Fat and Protein Corrected Milk (FPCM). The observed trends of the environmental performances of the studied farming systems were similar for both evaluation methods. The GHG emissions revealed a little range of variation (from 2.0 to 2.3 kg CO2-eq per kg of FPCM) with differences between farming systems being not significant. The ReCiPe end-point analysis showed a larger range of values and environmental performances of the low-input farm were significantly different compared to the medium- and high-input farms. In general, enteric methane emissions, field operations, electricity and production of agricultural machineries were the most relevant processes in determining the overall environmental performances of farms. Future research will be dedicated to (i) explore and better define the environmental implications of the land use impact category in the Mediterranean sheep farming systems, and (ii) contribute to revising and improving the existing LCA dataset for Mediterranean farming systems. Copyright © 2014

Environmental and thermodynamic evaluation of CO2 capture, transport and storage with and without enhanced resource recovery

International Nuclear Information System (INIS)

Iribarren, Diego; Petrakopoulou, Fontina; Dufour, Javier

2013-01-01

This study evaluates the environmental and thermodynamic performance of six coal-fired power plants with CO 2 capture and storage. The technologies examined are post-combustion capture using monoethanolamine, membrane separation, cryogenic fractionation and pressure swing adsorption, pre-combustion capture through coal gasification, and capture performing conventional oxy-fuel combustion. The incorporation of CO 2 capture is evaluated both on its own and in combination with CO 2 transport and geological storage, with and without beneficial use. Overall, we find that pre-combustion CO 2 capture and post-combustion through membrane separation present relatively low life-cycle environmental impacts and high exergetic efficiencies. When accounting for transport and storage, the environmental impacts increase and the efficiencies decrease. However, a better environmental performance can be achieved for CO 2 capture, transport and storage when incorporating beneficial use through enhanced oil recovery. The performance with enhanced coal-bed methane recovery, on the other hand, depends on the impact categories evaluated. The incorporation of methane recovery results in a better thermodynamic performance, when compared to the incorporation of oil recovery. The cumulative energy demand shows that the integration of enhanced resource recovery strategies is necessary to attain favourable life-cycle energy balances. - Highlights: ► Evaluation of six different CO 2 capture technologies for coal-fired power plants. ► Calculation of life-cycle environmental impacts and exergetic efficiencies. ► Suitability of post-combustion capture with membrane separation. ► Suitability of pre-combustion capture through coal gasification. ► Improved performance when incorporating enhanced resource recovery

An Integrated Approach For Developing Environmental Performance Evaluation Of Taiwans Food Industry

Directory of Open Access Journals (Sweden)

Anirut Pipatprapa

2015-08-01

Full Text Available Environmental performance EP is a comprehensive sustainable development concept. Thus determining the suitable EP indicator is an important process. This study combines structural equation modeling SEM and fuzzy analytic hierarchy process FAHP to identify the priority weight of factors for assessing the EP of Taiwans food industry. A SEM approach was used to develop and define EP factors and sub-factors using a questionnaire designed to gather data from 163 managers in the food industry. A FAHP approach was employed to prioritize the scores using a questionnaire to interview 21 experts regarding the different aspects of EP. The SEM results indicate that market orientation MO quality management QM and innovation capability IC have a positive and significant effect on EP. The FAHP results illustrate that quality policy quality assurance competitor orientation and quality control are most important in assessing EP. The findings of this study provide alternative ways to assess EP in the food industry and assist manager decision-making to reduce the environmental effects of the industry.

Environmental Evaluation of Building Materials of 5 Slovak Buildings

Science.gov (United States)

Porhincak, Milan; Estokova, Adriana

2013-11-01

Building activity has recently led to the deterioration of environment and has become unsustainable. Several strategies have been introduced in order to minimize consumption of energy and resulting CO2 emissions having their origin in the operational phase. But also other stages of Life Cycle should are important to identify the overall environmental impact of construction sector. In this paper 5 similar Slovak buildings (family houses) were analyzed in terms of environmental performance of building materials used for their structures. Evaluation included the weight of used materials, embodied energy and embodied CO2 and SO2 emissions. Analysis has proven that the selection of building materials is an important factor which influences the environmental profile. Findings of the case study indicated that materials like concrete, ceramic or thermal insulation materials based on polystyrene and mineral wool are ones with the most negative environmental impact.

Environmental Management Performance Report for December 1999

Energy Technology Data Exchange (ETDEWEB)

EDER, D.M.

2000-02-16

The purpose of the Environmental Management Performance Report (EMPR) is to provide the Department of Energy Richland Operations Office's (DOE-RL's) report of Hanford's Environmental Management (EM) performance by: U. S. Department of Energy, Richland Operations Office, Project Hanford Management Contract (PHMC) through Fluor Hanford, Inc. (FHI) and its subcontractors, Environmental Restoration Contract through Bechtel Hanford, Inc. (BHI), and its subcontractors, and Pacific Northwest National Laboratories (PNNL) for EM and EM Science and Technology (S&T) Mission. This report is a monthly publication that summarizes EM Site performance under RL Operations Office. It is organized by the four sections listed above, with each section containing an Executive Summary and Area Performance Summaries. A listing of what is contained in the sections can be found in the Table of Contents.

78 FR 68060 - Availability of FY 12 Grantee Performance Evaluation Reports for the Eight States of EPA Region 4...

Science.gov (United States)

2013-11-13

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9902-81--Region 4] Availability of FY 12 Grantee Performance Evaluation Reports for the Eight States of EPA Region 4 and 17 Local Agencies AGENCY: Environmental... evaluation reports. SUMMARY: EPA's grant regulations require the Agency to evaluate the performance of...

ENVIRONMENTAL AND SUSTAINABLE TECHNOLOGY EVALUATION: BIOMASS CO-FIRING IN INDUSTRIAL BOILERS--UNIVERSITY OF IOWA

Science.gov (United States)

The U.S. EPA operates the Environmental and Sustainable Technology Evaluation (ESTE) program to facilitate the deployment of innovative technologies through performance verification and information dissemination. This ESTE project involved evaluation of co-firing common woody bio...

The Relation between Sustainable Innovation Strategy and Financial Performance Mediated By Environmental Performance

Directory of Open Access Journals (Sweden)

Hariyati Hariyati

2015-06-01

Full Text Available This study aims to examine the relationship of sustainable innovation strategy and financial performance through the mediation environmental performance. The hypothesis in this study is sustainable innovation strategy affect the financial performance which is mediated by environmental performance. This study is quantitative research in the explanatory level. The population of this study is all the manufacturer companies in East Java. The data is collected through questionnaire. The unit of analysis is a business unit. The respondent of this study is the manager of a business unit manufacturing company in East Java. The results showed that the environmental performance mediates partially the relation between sustainable innovation strategy and financial performance.

Proposal of an environmental performance index to assess solid waste treatment technologies

International Nuclear Information System (INIS)

Goulart Coelho, Hosmanny Mauro; Lange, Liséte Celina; Coelho, Lineker Max Goulart

2012-01-01

Highlights: ► Proposal of a new concept in waste management: Cleaner Treatment. ► Development of an index to assess quantitatively waste treatment technologies. ► Delphi Method was carried out so as to define environmental indicators. ► Environmental performance evaluation of waste-to-energy plants. - Abstract: Although the concern with sustainable development and environment protection has considerably grown in the last years it is noted that the majority of decision making models and tools are still either excessively tied to economic aspects or geared to the production process. Moreover, existing models focus on the priority steps of solid waste management, beyond waste energy recovery and disposal. So, in order to help the lack of models and tools aiming at the waste treatment and final disposal, a new concept is proposed: the Cleaner Treatment, which is based on the Cleaner Production principles. This paper focuses on the development and validation of the Cleaner Treatment Index (CTI), to assess environmental performance of waste treatment technologies based on the Cleaner Treatment concept. The index is formed by aggregation (summation or product) of several indicators that consists in operational parameters. The weights of the indicator were established by Delphi Method and Brazilian Environmental Laws. In addition, sensitivity analyses were carried out comparing both aggregation methods. Finally, index validation was carried out by applying the CTI to 10 waste-to-energy plants data. From sensitivity analysis and validation results it is possible to infer that summation model is the most suitable aggregation method. For summation method, CTI results were superior to 0.5 (in a scale from 0 to 1) for most facilities evaluated. So, this study demonstrates that CTI is a simple and robust tool to assess and compare the environmental performance of different treatment plants being an excellent quantitative tool to support Cleaner Treatment implementation.

Evaluation of Brazilian intercomparison program data from 1991 to 1995 of radionuclide assays in environmental samples

International Nuclear Information System (INIS)

Vianna, Maria Elizabeth Couto M.; Tauhata, Luiz; Oliveira, Antonio Eduardo de; Oliveira, Josue Peter de; Clain, Almir Faria; Ferreira, Ana Cristina M.

1998-01-01

Historical radioanalytical data from the Institute of Radiation Protection and Dosimetry (IRD) national intercomparison program from 1991 to 1995 were analyzed to evaluate the performance of sixteen Brazilian laboratories in radionuclide analyses in environmental samples. Data are comprised of measurements of radionuclides in 435 spiked environmental samples distributed in fifteen intercomparison runs comprised of 955 analyses. The general and specific radionuclide performances of the participating laboratories were evaluated relative to the reference value. Data analysis encourages improvements in beta emitter measurements

Environmental investment and firm performance: A network approach

International Nuclear Information System (INIS)

Bostian, Moriah; Färe, Rolf; Grosskopf, Shawna; Lundgren, Tommy

2016-01-01

This study examines the role of investment in environmental production practices for both environmental performance and energy efficiency over time. We employ a network DEA approach that links successive production technologies through intertemporal investment decisions with a period by period estimation. This allows us to estimate energy efficiency and environmental performance separately, as well as productivity change and its associated decompositions into efficiency change and technology change. Incorporating a network model also allows us to account for both short-term environmental management practices and long-term environmental investments in each of our productivity measures. We apply this framework to a panel of detailed plant-level production data for Swedish manufacturing firms covering the years 2002–2008. - Highlights: • We use a network DEA model to account for intertemporal environmental investment decisionsin measures of firm productivity. • We apply our network technology model to a panel of firms in Sweden's pulp and paperindustry for the years 2002 - 2008. • We model environmental investments and expenditures separately from other productionoriented inputs. • We find evidence of positive relationships between energy efficiency, environmental performance, and firm productivity.

The ambiguities of performance-based governance reforms in Italy: Reviving the fortunes of evaluation and performance measurement.

Science.gov (United States)

Marra, Mita

2018-08-01

Over the past two decades, Italy's administrative reforms have institutionalized evaluation to improve program effectiveness, staff productivity, and results-driven accountability against waste and corruption. Across ministries, regional governments, universities, schools and environmental protection agencies, seemingly unexpected consequences have emerged out of the implementation of performance measurement and evaluation regimes within public organizations. Formal compliance to legally binding evaluation procedures, judicially-sanctioned managerial accountability and lack of cross-agency coordination coupled with long-standing cultural separations among evaluators are some of the ambiguities associated with a performance-based governance system within Italian public administration. Building upon the 'new governane theory,' and qualitative fieldwork, I explore the political consequences of evaluation and performance measurement for possible improvements. From a normative perspective, greater integration between program evaluation and performance measurement can support organizational learning and democratic accountability both at the central and local level. Copyright © 2017 Elsevier Ltd. All rights reserved.

Assessing the environmental performance of construction materials testing using EMS: An Australian study.

Science.gov (United States)

Dejkovski, Nick

2016-10-01

This paper reports the audit findings of the waste management practices at 30 construction materials testing (CMT) laboratories (constituting 4.6% of total accredited CMT laboratories at the time of the audit) that operate in four Australian jurisdictions and assesses the organisation's Environmental Management System (EMS) for indicators of progress towards sustainable development (SD). In Australia, waste indicators are 'priority indicators' of environmental performance yet the quality and availability of waste data is poor. National construction and demolition waste (CDW) data estimates are not fully disaggregated and the contribution of CMT waste (classified as CDW) to the national total CDW landfill burden is difficult to quantify. The environmental and human impacts of anthropogenic release of hazardous substances contained in CMT waste into the ecosphere can be measured by construing waste indicators from the EMS. An analytical framework for evaluating the EMS is developed to elucidate CMT waste indicators and assess these indicators against the principle of proportionality. Assessing against this principle allows for: objective evaluations of whether the environmental measures prescribed in the EMS are 'proportionate' to the 'desired' (subjective) level of protection chosen by decision-makers; and benchmarking CMT waste indicators against aspirational CDW targets set by each Australian jurisdiction included in the audit. Construed together, the EMS derived waste indicators and benchmark data provide a composite indicator of environmental performance and progress towards SD. The key audit findings indicate: CMT laboratories have a 'poor' environmental performance (and overall progress towards SD) when EMS waste data are converted into indicator scores and assessed against the principle of proportionality; CMT waste recycling targets are lower when benchmarked against jurisdictional CDW waste recovery targets; and no significant difference in the average

Environmental acceptability of high-performance alternatives for depleted uranium penetrators

Energy Technology Data Exchange (ETDEWEB)

Kerley, C.R.; Easterly, C.E.; Eckerman, K.F. [and others

1996-08-01

The Army`s environmental strategy for investigating material substitution and management is to measure system environmental gains/losses in all phases of the material management life cycle from cradle to grave. This study is the first in a series of new investigations, applying material life cycle concepts, to evaluate whether there are environmental benefits from increasing the use of tungsten as an alternative to depleted uranium (DU) in Kinetic Energy Penetrators (KEPs). Current military armor penetrators use DU and tungsten as base materials. Although DU alloys have provided the highest performance of any high-density alloy deployed against enemy heavy armor, its low-level radioactivity poses a number of environmental risks. These risks include exposures to the military and civilian population from inhalation, ingestion, and injection of particles. Depleted uranium is well known to be chemically toxic (kidney toxicity), and workplace exposure levels are based on its renal toxicity. Waste materials containing DU fragments are classified as low-level radioactive waste and are regulated by the Nuclear Regulatory Commission. These characteristics of DU do not preclude its use in KEPs. However, long-term management challenges associated with KEP deployment and improved public perceptions about environmental risks from military activities might be well served by a serious effort to identify, develop, and substitute alternative materials that meet performance objectives and involve fewer environmental risks. Tungsten, a leading candidate base material for KEPS, is potentially such a material because it is not radioactive. Tungsten is less well studied, however, with respect to health impacts and other environmental risks. The present study is designed to contribute to the understanding of the environmental behavior of tungsten by synthesizing available information that is relevant to its potential use as a penetrator.

Evaluation of the Performance of the Mars Environmental Compatibility Assessment Electrometer

Science.gov (United States)

Mantovani, James G.

2002-01-01

The Mars Environmental Compatibility Assessment (MECA) electrometer is an instrument that was designed jointly by researchers at the Jet Propulsion Laboratory and the Kennedy Space Center, and is intended to fly on a future space exploration mission of the surface of Mars. The electrometer was designed primarily to study (1) the electrostatic interaction between the Martian soil and five different types of insulators, which are attached to the electrometer, as the electrometer is rubbed over the Martian soil. The MECA/Electrometer is also capable of measuring (2) the presence of charged particles in the Martian atmosphere, (3) the local electric field strength, and (4) the local temperature. The goal of the research project described in this report was to test and evaluate the measurement capabilities of the MECA/Electrometer under simulated Martian surface conditions using facilities located in the Labs and Testbeds Division at the Kennedy Space Center. The results of this study indicate that the Martian soil simulant can triboelectrically charge up the insulator surface. However, the maximum charge buildup did not exceed 18% of the electrometer's full-range sensitivity when rubbed vigorously, and is more likely to be as low as 1% of the maximum range when rubbed through soil. This indicates that the overall gain of the MECA/Electrometer could be increased by a factor of 50 if measurements at the 50% level of full-range sensitivity are desired. The ion gauge, which detects the presence of charged particles, was also evaluated over a pressure range from 10 to 400 Torr (13 to 533 mbar). The electric field sensor was also evaluated. Although the temperature sensor was not evaluated due to project time constraints, it was previously reported to work properly.

Performance Measures for Evaluating Public Participation Activities in the Office of Environmental Management (DOE)

Energy Technology Data Exchange (ETDEWEB)

Carnes, S.A.

2001-02-15

Public participation in Office of Environmental Management (EM) activities throughout the DOE complex is a critical component of the overall success of remediation and waste management efforts. The challenges facing EM and its stakeholders over the next decade or more are daunting (Nuclear Waste News 1996). Achieving a mission composed of such challenges will require innovation, dedication, and a significant degree of good will among all stakeholders. EM's efforts to date, including obtaining and using inputs offered by EM stakeholders, have been notable. Public participation specialists have accepted and met challenges and have consistently tried to improve their performance. They have reported their experiences both formally and informally (e.g., at professional conferences and EM Public Participation Network Workshops, other internal meetings of DOE and contractor public participation specialists, and one-on-one consultations) in order to advance the state of their practice. Our research, and our field research in particular (including our interactions with many representatives of numerous stakeholder groups at nine DOE sites with diverse EM problems), have shown that it, is possible to develop coherent results even in a problem domain as complex as that of EM. We conclude that performance-based evaluations of public participation appear possible, and we have recommended an approach, based on combined and integrated multi-stakeholder views on the attributes of successful public participation and associated performance indicators, that seems workable and should be acceptable to diverse stakeholders. Of course, as an untested recommendation, our approach needs the validation that can only be achieved by application (perhaps at a few DOE sites with ongoing EM activities). Such an application would serve to refine the proposed approach in terms of its clarity, its workability, and its potential for full-scale use by EM and, potentially, other government

Evaluation of the performance characteristics of radon and radon-daughter concentration measurement devices under controlled environmental conditions

International Nuclear Information System (INIS)

Pearson, M.D.

1989-04-01

The Technical Measurements Center (TMC) conducted a study to expose 10 radon and 7 radon-daughter concentration measurement devices in the DOE/GJPO Radon/Radon-Daughter Environmental Chamber for a series of 24 controlled-environment tests. The tests evaluated the devices' response to temperature, relative humidity, dew point, condensation-nuclei concentration, radon-daughter/radon equilibrium ratio, and non-uniform radon and radon-daughter concentration. Devices were evaluated for linear response as a function of concentration. In addition to response to environmental parameters, the evaluation included determining the utility of the devices in providing reasonable assurance of compliance with the radon and radon-daughter concentration standards for DOE remedial action programs. This reasonable assurance criterion is based on a coefficient of variation of 25 percent for devices deployed for year-long measurements and a coefficient of variation of 18 percent for devices deployed for intermittent sampling. 39 refs., 65 figs., 33 tabs

Environmental performance management

International Nuclear Information System (INIS)

Kwant, J.W.H.; Grant, R.O.H.

1991-01-01

This paper describes the environmental programme developed by Shell U.K. Exploration and Production (EXPRO) aiming at a continuous improvement of its environmental performance. The company operates a total of 33 platforms in the North Sea and has 3 land based gas treatment plants. This paper, therefore, relates mainly to the offshore environment. The programme is driven by adopting a goal setting policy. The plan was initiated mid 1990 when an inventory was made of all gaseous emissions, liquid effluents and solid waste discharges of EXPRO's operations during 1989. This baseline was used to identify the largest waste steams and to set priorities for the subsequent improvement programme. Areas for improvement are: atmospheric emissions from venting, flaring and the use of Freons and Halons, the use of Oil Based Mud (OBM), produced water and the disposal of industrial waste. The programme has gained momentum and targets have been set

Assessment and evaluation of technologies for environmental restoration. Progress report

Energy Technology Data Exchange (ETDEWEB)

Uzochukwu, G. A. [North Carolina A and T State Univ., Greensboro, NC (United States)

2000-06-30

Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.

Assessment and evaluation of technologies for environmental restoration. Progress report

International Nuclear Information System (INIS)

Uzochukwu, G. A.

2000-01-01

Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.

Assessment and evaluation of technologies for environmental restoration. Progress report

International Nuclear Information System (INIS)

Uzochukwu, G.A.

1999-01-01

Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites

Environmental performance reviews: Spain

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-10-01

The second OECD Review of Spain's environmental performance reviews Spain's progress in the context of OECD environmental strategy for the first decade of the 21st century in relation to its own policy objectives. It praises a number of achievements such as in commitments to climate change policies and developments of cogeneration and renewable energy sources. Although emissions of sulphur dioxide from the energy sector have fallen since 1990 they are still high when measured per capita and per unit of GDP. The OECD recommends further control of emissions of SOx, NOx, VOCs and NH{sub 3}. Subsidies such as compulsory purchase of domestic coal by electricity producers are set to increase. The report recommends the phasing out of environmental subsidies (which has begun) and making use of economic instruments to encourage efficient resource management and reduction of pollutants. Greenhouse gas emissions increased by 38% between 1990 and 2002 and the outlook for the next few years is pessimistic. 39 figs., 31 tabs.

Ethical and affective evaluation of environmental risks

International Nuclear Information System (INIS)

Bohm, G.; Pfister, H.R.

1998-01-01

Full text of publication follows: the present paper will be concerned with environmental risk perception, with special emphasis on those environmental risks that pertain to global change phenomena, such as climate change and ozone depletion. Two determinants of risk judgments are investigated that seem particularly relevant to environmental risks: ethical and affective evaluations. It is assumed that the focus of risk evaluation can be on one of two aspects: a) on an evaluation of potential losses, or b) on ethical considerations. We assume that both, potential loss and violation of ethical principles elicit emotional evaluations, but that these two judgmental aspects are associated with different specific emotions. Following cognitive emotion theories, we distinguish loss-based emotions, such as worry and fear, from ethical emotions, e.g., guilt and anger. A study is presented that investigates the role of ethical and affective evaluations in risk judgments. Various environmental risks were presented to subjects, e.g., air pollution, ozone depletion, climate change and destruction of ecological balance. For each environmental risk, subjects indicated in free-response format as well as on rating scales the extent to which ethical principles were violated, and the intensity of both loss-based and ethical emotions. The correlational structure of the emotion ratings confirms the distinction between loss-based and ethical emotions. Risk judgments co-vary with the strength of ethical evaluation and with the intensity of loss-based emotions, but are independent of ethical emotions. The implications of these findings for the risk appraisal process are discussed. (authors)

Life cycle environmental performance of miscanthus gasification versus other technologies for electricity production

DEFF Research Database (Denmark)

Nguyen, T Lan T; Hermansen, John Erik

2015-01-01

In this paper, the life cycle environmental performance of miscanthus gasification for electricity production in Denmark is evaluated and compared with that of direct combustion and anaerobic digestion. Furthermore, the results obtained are compared to those of natural gas to assess the potential...

Study design considerations in evaluating environmental impacts

Science.gov (United States)

Stan T. Lebow; Paul A. Cooper; Patricia Lebow

2006-01-01

The purpose of this chapter is to make the reader aware of how choices in study parameters may influence the outcome of treated-wood environmental impact evaluations. Evaluation of the leaching and environmental accumulation of preservatives from treated wood is a complex process. and many factors can influence the results of such studies. In laboratory studies, the...

An urban energy performance evaluation system and its computer implementation.

Science.gov (United States)

Wang, Lei; Yuan, Guan; Long, Ruyin; Chen, Hong

2017-12-15

To improve the urban environment and effectively reflect and promote urban energy performance, an urban energy performance evaluation system was constructed, thereby strengthening urban environmental management capabilities. From the perspectives of internalization and externalization, a framework of evaluation indicators and key factors that determine urban energy performance and explore the reasons for differences in performance was proposed according to established theory and previous studies. Using the improved stochastic frontier analysis method, an urban energy performance evaluation and factor analysis model was built that brings performance evaluation and factor analysis into the same stage for study. According to data obtained for the Chinese provincial capitals from 2004 to 2013, the coefficients of the evaluation indicators and key factors were calculated by the urban energy performance evaluation and factor analysis model. These coefficients were then used to compile the program file. The urban energy performance evaluation system developed in this study was designed in three parts: a database, a distributed component server, and a human-machine interface. Its functions were designed as login, addition, edit, input, calculation, analysis, comparison, inquiry, and export. On the basis of these contents, an urban energy performance evaluation system was developed using Microsoft Visual Studio .NET 2015. The system can effectively reflect the status of and any changes in urban energy performance. Beijing was considered as an example to conduct an empirical study, which further verified the applicability and convenience of this evaluation system. Copyright © 2017 Elsevier Ltd. All rights reserved.

Assessing the environmental performance of English arable and livestock holdings using data from the Farm Accountancy Data Network (FADN).

Science.gov (United States)

Westbury, D B; Park, J R; Mauchline, A L; Crane, R T; Mortimer, S R

2011-03-01

Agri-environment schemes (AESs) have been implemented across EU member states in an attempt to reconcile agricultural production methods with protection of the environment and maintenance of the countryside. To determine the extent to which such policy objectives are being fulfilled, participating countries are obliged to monitor and evaluate the environmental, agricultural and socio-economic impacts of their AESs. However, few evaluations measure precise environmental outcomes and critically, there are no agreed methodologies to evaluate the benefits of particular agri-environmental measures, or to track the environmental consequences of changing agricultural practices. In response to these issues, the Agri-Environmental Footprint project developed a common methodology for assessing the environmental impact of European AES. The Agri-Environmental Footprint Index (AFI) is a farm-level, adaptable methodology that aggregates measurements of agri-environmental indicators based on Multi-Criteria Analysis (MCA) techniques. The method was developed specifically to allow assessment of differences in the environmental performance of farms according to participation in agri-environment schemes. The AFI methodology is constructed so that high values represent good environmental performance. This paper explores the use of the AFI methodology in combination with Farm Business Survey data collected in England for the Farm Accountancy Data Network (FADN), to test whether its use could be extended for the routine surveillance of environmental performance of farming systems using established data sources. Overall, the aim was to measure the environmental impact of three different types of agriculture (arable, lowland livestock and upland livestock) in England and to identify differences in AFI due to participation in agri-environment schemes. However, because farm size, farmer age, level of education and region are also likely to influence the environmental performance of a

Open Economy, Institutional Quality, and Environmental Performance: A Macroeconomic Approach

Directory of Open Access Journals (Sweden)

Amaryllis Mavragani

2016-06-01

Full Text Available As the subject of how economic development affects the quality of the natural environment has gained great momentum, this paper focuses on examining the extent to which the openness of a market economy and the quality of the institution affect environmental performance. The majority of the current studies focus on the Environmental Kuznets Curve and the level of economic growth. This paper addresses this question by relating environmental (“Environmental Performance Index” to macroeconomic (Gross Domestic Product per capita, “Open Markets Index” and governance indicators (“Worldwide Governance Indicators”. The sample consists of 75 countries, including all G20 and EU members, comprising “more than 90% of global trade and investment”. Findings show that the Environmental Performance Index is positively correlated to each of the (institutional indicators, so as to confirm that the selected indices are consistent with previous studies, suggesting that environmental performance increases in line with economic development and that good governance increases a country’s levels of environmental protection. By applying factor analysis, an empirical model of the Environmental Performance Index is estimated, suggesting that there is a significant positive correlation between a country’s economic growth, the openness of an economy, high levels of effective governance, and its environmental performance.

Evaluation of oilseed crop rotations with agro-environmental indicators

Directory of Open Access Journals (Sweden)

Pouzet André

2003-05-01

Full Text Available The European Common Agricultural Policy is shifting an increasing part of the subsidies to eco-conditionality. Henceforth, it becomes essential to evaluate the environmental effect of agricultural practices, and more generally performances of cropping and farming systems, in order to design and to develop more sustainable systems. This assessment is being implemented for the main cropping systems of some French regions, using environmental indicators. Eleven exposure indicators were chosen in order to represent a wide range of specific sustainability objectives dealing with water, soil, air, non-renewable resources, biodiversity, and landscape. The results present the sustainability assessment for the crop rotations of Champagne Berrichonne region in the Centre of France.

77 FR 52022 - Availability of FY 11 Grantee Performance Evaluation Reports for the Eight States of EPA Region 4...

Science.gov (United States)

2012-08-28

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9721-4] Availability of FY 11 Grantee Performance Evaluation Reports for the Eight States of EPA Region 4 and 17 Local Agencies AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of availability; Clean Air Act Section 105 grantee performance evaluation reports...

76 FR 64086 - Availability of FY 10 Grantee Performance Evaluation Reports for the Eight States of EPA Region 4...

Science.gov (United States)

2011-10-17

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9478-7] Availability of FY 10 Grantee Performance Evaluation Reports for the Eight States of EPA Region 4 and 17 Local Agencies AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of availability; Clean Air Act Section 105 grantee performance evaluation reports...

Evaluation of environmental change and its effects on the radiological performance of a hypothetical shallow engineered disposal facility at Elstow, Bedfordshire

International Nuclear Information System (INIS)

1988-03-01

The results of a project designed to evaluate aspects of a hypothetical facility for disposal of radioactive wastes at Elstow, Bedfordshire, are described. The project included modelling of environmental change using the TIME2 code, groundwater flow modelling, biosphere modelling and risk analysis using the SYVAC A/C code. The aims of the work were to demonstrate use of TIME2, investigate the evolution of the facility's environment and to evaluate the influence of environmental change on estimates of radiological risk. Risk analysis of several time-independent environmental system states, using data obtained from the other tasks, indicated that environmental changes significantly influence estimates of radiological risk. (author)

PERFORMANCE EVALUATION: LITERATURE REVIEW AND TIME EVOLUTION.

Directory of Open Access Journals (Sweden)

Pintea Mirela-Oana

2012-07-01

Full Text Available Performance evaluation of an economic entity requires approaching several criteria, such as industry and economic entity type, managerial and entrepreneurial strategy, competitive environment, human and material resources available, using a system of appropriate performance indicators for this purpose.The exigencies of communication occurred on the growing number of phenomena that marked the global economy in recent decades (internationalization and relocation of business crises and turmoil in financial markets, demand performance measurement to be made in a comprehensive way by financial and non-financial criteria. Indicators are measures of performance used by management to measure, report and improve performance of the economic entity. The relationship between indicators and management is ensured by the existence of performance measurement systems. Studies to date indicate that economic entities using balanced performance measurement systems as a key management tool registered superior performance compared to entities not using such systems. This study attempts to address the issue of performance evaluation by presenting opinions of different authors concerning the process of performance measurement and to present, after revising the literature, the evolution of the performance evaluation systems. We tried to do this literature review because sustainable development and, therefore, globalization require new standards of performance that exceeds the economic field, both for domestic companies as well as international ones. So, these standards should be integrated into corporate strategy development to ensure sustainability of activities undertaken by harmonizing the economic, social and environmental objectives. To assess the performance of economic entities it is required that performance evaluation to be done with a balanced multidimensional system, including both financial ratios and non-financial indicators in order to reduce the limits of

Chemical oil-spill dispersants: evaluation of three laboratory procedures for estimating performance

International Nuclear Information System (INIS)

Clayton, J.R.; Marsden, P.

1992-09-01

The report presents data from studies designed to evaluate characteristics of selected bench-scale test methods for estimating performance of chemical agents for dispersing oil from surface slicks into an underlying water column. In order to mitigate the effect of surface slicks with chemical dispersant agents, however, an on-scene coordinator must have information and an understanding of performance characteristics for available dispersant agents. Performance of candidate dispersant agents can be estimated on the basis of laboratory testing procedures that are designed to evaluate performance of different agents. Data presented in the report assist in the evaluation of candidate test methods for estimating performance of candidate dispersant agents. Three test methods were selected for evaluating performance: the currently accepted Revised Standard EPA test, Environmental Canada's Swirling Flask test, and the IFP-Dilution test

The application of DEA model in enterprise environmental performance auditing

Science.gov (United States)

Li, F.; Zhu, L. Y.; Zhang, J. D.; Liu, C. Y.; Qu, Z. G.; Xiao, M. S.

2017-01-01

As a part of society, enterprises have an inescapable responsibility for environmental protection and governance. This article discusses the feasibility and necessity of enterprises environmental performance auditing and uses DEA model calculate the environmental performance of Haier for example. The most of reference data are selected and sorted from Haier’s environmental reportspublished in 2008, 2009, 2011 and 2015, and some of the data from some published articles and fieldwork. All the calculation results are calculated by DEAP software andhave a high credibility. The analysis results of this article can give corporate managements an idea about using environmental performance auditing to adjust their corporate environmental investments capital quota and change their company’s environmental strategies.

Environmental pediatrics: an introduction and evaluation of online resources.

Science.gov (United States)

Weinstangel, Hannah; Buka, Irena; Campbell, Sandra

2016-12-01

The World Health Organization (WHO) estimates that three million children under the age of 5 die annually from environmentally related disease. In the United States, the cost of environmentally related public health concerns is estimated as greater than $55 billion. Environmental exposure is among parents' top health concerns for children. Yet, the study of the effects of environmental exposure on health outcomes is a developing field, and clinicians feel inadequately prepared to address these concerns. The Children's Environmental Health Clinic (ChEHC) is the first clinic of its kind in Canada. Their website includes a list of online resources on major topics related to child health and the environment. There has not yet been an objective evaluation of the comprehensiveness of the topics or scientific quality of the information on the website. This study seeks to offer an accessible introduction to the field of environmental pediatrics, including an online resource for evidence-based information on key topics in the field. These resources assist in disease prevention, health promotion, education, and the increasing need to balance environmental health risks. A scoping review of scientific and gray literature in the field of environmental pediatrics was performed to inform a written introduction to the field and to identify gaps in the content of the ChEHC website. The content of the ChEHC website was then objectively evaluated using the National Network of Libraries of Medicine checklist for health websites. Ten categories within the field of environmental pediatrics emerged from the literature review. A small number of gaps were identified on the website and in the literature. The content of the ChEHC website was found to be of high quality. The website will be updated using the results of the study as a guide, to make it as relevant, complete, and evidence-based as possible. Environmental pediatrics is an important, emerging topic. There is a need for accessible

Disposal of historically contaminated soil in the cement industry and the evaluation of environmental performance.

Science.gov (United States)

Li, Yeqing; Zhang, Jiang; Miao, Wenjuan; Wang, Huanzhong; Wei, Mao

2015-09-01

Approximately 400000t of DDTs/HCHs-contaminated soil (CS) needed to be co-processed in a cement kiln with a time limitation of 2y. A new pre-processing facility with a "drying, grinding and DDTs/HCHs vaporizing" ability was equipped to meet the technical requirements for processing cement raw meal and the environmental standards for stack emissions. And the bottom of the precalciner with high temperatures >1000°C was chosen as the CS feeding point for co-processing, which has rarely been reported. To assess the environmental performance of CS pre- and co-processing technologies, according to the local regulation, a test burn was performed by independent and accredited institutes systematically for determination of the clinker quality, kiln stack gas emissions and destruction efficiency of the pollutant. The results demonstrated that the clinker was of high quality and not adversely affected by CS co-processing. Stack emissions were all below the limits set by Chinese standards. Particularly, PCDD/PCDF emissions ranged from 0.0023 to 0.0085ngI-TEQNm(-3). The less toxic OCDD was the peak congener for CS co-processing procedure, while the most toxic congeners (i.e. 2,3,7,8-TeCDD, 1,2,3,7,8-PeCDD and 2,3,4,7,8-PeCDD) remained in a minor proportion. Destruction and removal efficiency (DRE) and destruction efficiency (DE) of the kiln system were better than 99.9999% and 99.99%, respectively, at the highest CS feeding rate during normal production. To guarantee the environmental performance of the system the quarterly stack gas emission was also monitored during the whole period. And all of the results can meet the national standards requirements. Copyright © 2015 Elsevier Ltd. All rights reserved.

Intermodal Freight Transport on the Right Track? Environmental and economic performances and their trade-off

International Nuclear Information System (INIS)

Kim, Nam Seok

2010-01-01

This dissertation aims to evaluate environmental and economic performances of an intermodal freight transport system and to estimate the trade-off between CO2 emissions, which is presented as an indicator of environmental performance, and freight costs, which indicate the economic performance of the intermodal freight system. The truck-only system is always regarded as the counterpart of the intermodal freight system in this dissertation. To examine the environmental performance of the intermodal freight system, CO2 emissions generated from all the processes in the intermodal chain, such as pre-haulage and post-haulage, long distance haulage, and transshipment, are estimated considering different sources that generate electricity and transmission loss of electricity (Chapters 3 and 4). To examine the economic performance of the system, two approaches are considered: (1) finding the intermodal breakeven distance for which the intermodal system is more competitive than the truck-only system (Chapter 5); (2) examining the economies of scale in the intermodal network and finding the route/system choice that minimizes the total freight transportation costs (Chapter 6). Finally, this dissertation attempts to find the trade-off between CO2 emissions (representing the environmental performance) and freight transportation cost (representing the economic performance) (Chapter 7)

Paradise Islands? Island States and Environmental Performance

Directory of Open Access Journals (Sweden)

Sverker C. Jagers

2016-03-01

Full Text Available Island states have been shown to outperform continental states on a number of large-scale coordination-related outcomes, such as levels of democracy and institutional quality. The argument developed and tested in this article contends that the same kind of logic may apply to islands’ environmental performance, too. However, the empirical analysis shows mixed results. Among the 105 environmental outcomes that we analyzed, being an island only has a positive impact on 20 of them. For example, island states tend to outcompete continental states with respect to several indicators related to water quality but not in aspects related to biodiversity, protected areas, or environmental regulations. In addition, the causal factors previously suggested to make islands outperform continental states in terms of coordination have weak explanatory power in predicting islands’ environmental performance. We conclude the paper by discussing how these interesting findings can be further explored.

Dust control products at Hagerman National Wildlife Refuge, Texas: environmental safety and performance

Science.gov (United States)

Kunz, Bethany K.; Little, Edward E.

2015-01-01

Controlling fugitive dust while protecting natural resources is a challenge faced by all managers of unpaved roads. Unfortunately, road managers choosing between dust control products often have little objective environmental information to aid their decisions. To address this information gap, the U.S. Geological Survey and the U.S. Fish and Wildlife Service collaborated on a field test of three dust control products with the objectives of (a) evaluating product performance under real-world conditions, (b) verifying the environmental safety of products identified as practically nontoxic in laboratory tests, and (c) testing the feasibility of several environmental monitoring techniques for use in dust control tests. In cooperation with refuge staff and product vendors, three products (one magnesium chloride plus binder, one cellulose, and one synthetic fluid plus binder) were applied in July 2012 to replicated road sections at the Hagerman National Wildlife Refuge in Texas. These sections were monitored periodically for 12 months after application. Product performance was assessed by mobile-mounted particulate-matter meters measuring production of fugitive dust and by observations of road conditions. Environmental safety was evaluated through on-site biological observations and leaching tests with samples of treated aggregate. All products reduced dust and improved surface condition during those 12 months. Planned environmental measurements were not always compatible with day-to-day refuge management actions; this incompatibility highlighted the need for flexible biological monitoring plans. As one of the first field tests of dust suppressants that explicitly incorporated biological endpoints, this effort provides valuable information for improving field tests and for developing laboratory or semifield alternatives.

A study on the relationship of environmental regulations and economic performances

Science.gov (United States)

Nisha, Jia; Chen, Shen

2017-11-01

This paper analyzes the mechanism transmission of environmental regulation affecting on economic performance from a new perspective. It shows that environmental regulations affect country’s economic performance through direct transmission and indirect transmission. Direct transmission means that environmental regulations affect economic performance from influencing corporation’s cost and revenue, and indirect transmission is that environmental regulations affect economic performance through leading to the increased effort of corporations in improving the quality of environment and building the image of fulfilling environmental responsibility.

Groundwater environmental capacity and its evaluation index.

Science.gov (United States)

Xing, Li Ting; Wu, Qiang; Ye, Chun He; Ye, Nan

2010-10-01

To date, no unified and acknowledged definition or well-developed evaluation index system of groundwater environment capacity can be found in the academia at home or abroad. The article explores the meaning of water environment capacity, and analyzes the environmental effects caused by the exploitation of groundwater resources. This research defines groundwater environmental capacity as a critical value in terms of time and space, according to which the groundwater system responds to the external influences within certain goal constraint. On the basis of observing the principles of being scientific, dominant, measurable, and applicable, six level 1 evaluation indexes and 11 constraint factors are established. Taking Jinan spring region for a case study, this research will adopt groundwater level and spring flow as constraint factors, and the allowable groundwater yield as the critical value of groundwater environmental capacity, prove the dynamic changeability and its indicating function of groundwater environmental capacity through calculation, and finally point out the development trends of researches on groundwater environmental capacity.

Environmental Variables and Pupils' Academic Performance in ...

African Journals Online (AJOL)

This causal-comparative study was carried out to investigate the influence of environmental variables on pupils' academic performance in primary science in Cross River State, Nigeria. Three hypotheses were formulated to guide the study. Two instruments were used to collect data for the study namely: environmental ...

Evaluating the relative environmental impact of countries.

Science.gov (United States)

Bradshaw, Corey J A; Giam, Xingli; Sodhi, Navjot S

2010-05-03

Environmental protection is critical to maintain ecosystem services essential for human well-being. It is important to be able to rank countries by their environmental impact so that poor performers as well as policy 'models' can be identified. We provide novel metrics of country-specific environmental impact ranks - one proportional to total resource availability per country and an absolute (total) measure of impact - that explicitly avoid incorporating confounding human health or economic indicators. Our rankings are based on natural forest loss, habitat conversion, marine captures, fertilizer use, water pollution, carbon emissions and species threat, although many other variables were excluded due to a lack of country-specific data. Of 228 countries considered, 179 (proportional) and 171 (absolute) had sufficient data for correlations. The proportional index ranked Singapore, Korea, Qatar, Kuwait, Japan, Thailand, Bahrain, Malaysia, Philippines and Netherlands as having the highest proportional environmental impact, whereas Brazil, USA, China, Indonesia, Japan, Mexico, India, Russia, Australia and Peru had the highest absolute impact (i.e., total resource use, emissions and species threatened). Proportional and absolute environmental impact ranks were correlated, with mainly Asian countries having both high proportional and absolute impact. Despite weak concordance among the drivers of environmental impact, countries often perform poorly for different reasons. We found no evidence to support the environmental Kuznets curve hypothesis of a non-linear relationship between impact and per capita wealth, although there was a weak reduction in environmental impact as per capita wealth increases. Using structural equation models to account for cross-correlation, we found that increasing wealth was the most important driver of environmental impact. Our results show that the global community not only has to encourage better environmental performance in less

Evaluating the relative environmental impact of countries.

Directory of Open Access Journals (Sweden)

Corey J A Bradshaw

Full Text Available Environmental protection is critical to maintain ecosystem services essential for human well-being. It is important to be able to rank countries by their environmental impact so that poor performers as well as policy 'models' can be identified. We provide novel metrics of country-specific environmental impact ranks - one proportional to total resource availability per country and an absolute (total measure of impact - that explicitly avoid incorporating confounding human health or economic indicators. Our rankings are based on natural forest loss, habitat conversion, marine captures, fertilizer use, water pollution, carbon emissions and species threat, although many other variables were excluded due to a lack of country-specific data. Of 228 countries considered, 179 (proportional and 171 (absolute had sufficient data for correlations. The proportional index ranked Singapore, Korea, Qatar, Kuwait, Japan, Thailand, Bahrain, Malaysia, Philippines and Netherlands as having the highest proportional environmental impact, whereas Brazil, USA, China, Indonesia, Japan, Mexico, India, Russia, Australia and Peru had the highest absolute impact (i.e., total resource use, emissions and species threatened. Proportional and absolute environmental impact ranks were correlated, with mainly Asian countries having both high proportional and absolute impact. Despite weak concordance among the drivers of environmental impact, countries often perform poorly for different reasons. We found no evidence to support the environmental Kuznets curve hypothesis of a non-linear relationship between impact and per capita wealth, although there was a weak reduction in environmental impact as per capita wealth increases. Using structural equation models to account for cross-correlation, we found that increasing wealth was the most important driver of environmental impact. Our results show that the global community not only has to encourage better environmental performance in

Evaluating the Relative Environmental Impact of Countries

Science.gov (United States)

Bradshaw, Corey J. A.; Giam, Xingli; Sodhi, Navjot S.

2010-01-01

Environmental protection is critical to maintain ecosystem services essential for human well-being. It is important to be able to rank countries by their environmental impact so that poor performers as well as policy ‘models’ can be identified. We provide novel metrics of country-specific environmental impact ranks – one proportional to total resource availability per country and an absolute (total) measure of impact – that explicitly avoid incorporating confounding human health or economic indicators. Our rankings are based on natural forest loss, habitat conversion, marine captures, fertilizer use, water pollution, carbon emissions and species threat, although many other variables were excluded due to a lack of country-specific data. Of 228 countries considered, 179 (proportional) and 171 (absolute) had sufficient data for correlations. The proportional index ranked Singapore, Korea, Qatar, Kuwait, Japan, Thailand, Bahrain, Malaysia, Philippines and Netherlands as having the highest proportional environmental impact, whereas Brazil, USA, China, Indonesia, Japan, Mexico, India, Russia, Australia and Peru had the highest absolute impact (i.e., total resource use, emissions and species threatened). Proportional and absolute environmental impact ranks were correlated, with mainly Asian countries having both high proportional and absolute impact. Despite weak concordance among the drivers of environmental impact, countries often perform poorly for different reasons. We found no evidence to support the environmental Kuznets curve hypothesis of a non-linear relationship between impact and per capita wealth, although there was a weak reduction in environmental impact as per capita wealth increases. Using structural equation models to account for cross-correlation, we found that increasing wealth was the most important driver of environmental impact. Our results show that the global community not only has to encourage better environmental performance in less

Leading product-related environmental performance indicators: a selection guide and database

DEFF Research Database (Denmark)

Issa, Isabela I.; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2015-01-01

Ecodesign is a proactive environmental management and improvement approach employed in the product development process, which aims to minimize the environmental impacts caused during a product's life cycle and thus improve its environmental performance. The establishment of measurable environmental...... in the selection and application of environmental performance indicators - a more structured approach is still lacking. This paper presents the efforts made to identify and systematize existing leading product-related environmental performance indicators, based on a systematic literature review, and to develop...

A fuzzy multi criteria approach for evaluating green supplier's performance in green supply chain with linguistic preferences

DEFF Research Database (Denmark)

Shen, Lixin; Olfat, Laya; Govindan, Kannan

2013-01-01

Today's international business environment has forced many firms to focus on supply chain management to gain a competitive advantage. During recent years, supplier selection process in the supply chain has become a key strategic consideration. With the growing worldwide awareness of environmental...... protection and the corresponding increase in legislation and regulations, green purchasing has become an important issue for companies to gain environmental sustainability. Traditionally, companies consider criteria such as price, quality and lead time, when evaluating supplier performance and do not give...... enough attention to environmental criteria as a means to evaluate suppliers. Now, many companies have begun to implement green supply chain management (GSCM) and to consider environmental issues and the measurement of their suppliers' environmental performance. This paper examines GSCM to propose a fuzzy...

The Importance of Environmental Resposibility in Firm Financial Performance

OpenAIRE

Dãnilã Alexandra; Horga Maria-Gabriela

2014-01-01

Ensuring environmental protection is one of the three pillars of sustainable development. Identifying the factors that lead to enterprise financial performance must take into consideration environmental factors. Research in the field showed an increasing importance of such factors in obtaining financial results. Present paper aims to demonstrate the link between environmental responsibility and firm financial performance, using statistical tools. Research was conducted in Romanian tourism sec...

Environmental-performance research priorities: Wood products. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-01-15

This report describes a research plan to establish environmental, energy, and economic performance measures for renewable building materials, and to identify management and technology alternatives to improve environmental performance in a cost-effective manner. The research plan is designed to: (1) collect environmental and economic data on all life-cycle stages of the materials, (2) ensure that the data follows consistent definitions and collection procedures, and (3) develop analytical procedures for life-cycle analysis to address environmental performance questions. The research will be subdivided into a number of individual project modules. The five processing stages of wood used to organize the research plan are: (1) resource management and harvesting; (2) processing; (3) design and construction of structures; (4) use, maintenance, and disposal; and (5) waste recycling. Individual research module descriptions are provided in the report, as well as assessment techniques, research standards and protocol, and research management. 13 refs., 5 figs., 3 tabs.

The impact of environmental conditions on human performance: A handbood of environmental exposures. Volume 1

International Nuclear Information System (INIS)

Echeverria, D.; Barnes, V.; Bittner, A.

1994-09-01

A comprehensive review of the technical literature was conducted regarding the impact of environmental conditions on hyman performance applicable to nuclear power plant workers. The environmental conditions considered were vibration, noise, heat, cold, and light. Research staff identified potential human performance deficits (e.g., decreased dexterity, impaired vision, hearing loss, memory deficiency) along a continuum of increasing occupational exposure, ranging from exposures that result in no deficit to exposures that resulted in significant performance problems. Specific deficits were included in the report if there was sound scientific evidence that environmental exposure resulted in those performance deficits. The levels associated with each deficit were then compared to the protection afforded by existing occupational exposure standards. Volume 1 is a handbook for use by NRC inspectors to help them determine the impact of specific environmental conditions on licensee personnel performance. it discusses the units used to measure each condition, discusses the effects of the condition on task performance, presents an example of the assessment of each condition in a nuclear power plant, and discusses potential methods for reducing the effects of

ENVIRONMENTAL AND SUSTAINABLE TECHNOLOGY EVALUATION: BIOMASS CO-FIRING IN INDUSTRIAL BOILERS--MINNESOTA POWER'S RAPIDS ENERGY CENTER

Science.gov (United States)

The U.S. EPA operates the Environmental and Sustainable Technology Evaluation (ESTE) program to facilitate the deployment of innovative technologies through performance verification and information dissemination. This ESTE project involved evaluation of co-firing common woody bio...

Drill and Blast Performance Evaluation at the Obra Pit of Chirano ...

African Journals Online (AJOL)

Michael

2016-12-02

Dec 2, 2016 ... The methods employed included: drilling performance analysis using statistical methods; ... parameters and blasting practices were acceptable to produce good fragmentation but the actual drilling ..... the explosives was measured from the bottom of ..... Economic and Financial Evaluation, Environmental.

Methodological proposal for environmental impact evaluation since different specific methods

International Nuclear Information System (INIS)

Leon Pelaez, Juan Diego; Lopera Arango Gabriel Jaime

1999-01-01

Some conceptual and practical elements related to environmental impact evaluation are described and related to the preparation of technical reports (environmental impact studies and environmental management plans) to be presented to environmental authorities for obtaining the environmental permits for development projects. In the first part of the document a summary of the main aspects of normative type is made that support the studies of environmental impact in Colombia. We propose a diagram for boarding and elaboration of the evaluation of environmental impact, which begins with the description of the project and of the environmental conditions in the area of the same. Passing then to identify the impacts through a method matricial and continuing with the quantitative evaluation of the same. For which we propose the use of the method developed by Arboleda (1994). Also we propose to qualify the activities of the project and the components of the environment in their relative importance, by means of a method here denominated agglomerate evaluation. Which allows finding those activities more impacting and the mostly impacted components. Lastly it is presented some models for the elaboration and presentation of the environmental management plans. The pursuit programs and those of environmental supervision

Investigating the Link between Environmental Performance and Corporate Performance in the UK

OpenAIRE

Boonchan, Poomkaew

2010-01-01

This study is part of the ongoing ‘ERIPS’ project at the University of Nottingham which focus on examining the impact of environmental performance on environmental performance of firms in the UK manufacturing sector. Both primary data which has been obtained by using a questionnaire survey (firm level data) and secondary data obtained from FAME database have been used in this study. Further, structural equation modeling and regression analyses (i.e., mediated and moderated regression analysis...

Are EMS environmentally effective? The link between environmental management systems and environmental performance in European companies

NARCIS (Netherlands)

Hertin, J.; Berkhout, F.G.H.; Wagner, M.; Tyteca, D.

2008-01-01

Based on the analysis of a large dataset on the environmental performance of European companies in five industrial sectors, this paper examines the question of whether the presence of an environmental management system (EMS) has a positive impact on the eco-efficiency of companies. It begins with a

Study on evaluation index system of operational performance of municipal wastewater treatment plants in China

Science.gov (United States)

Xiaoxin, Zhang; Jin, Huang; Ling, Lin; Yan, Li

2018-05-01

According to the undeveloped evaluation method for the operational performance of the municipal wastewater treatment plants, this paper analyzes the policies related to sewage treatment industry based on the investigation of the municipal wastewater treatment plants. The applicable evaluation method for the operational performance was proposed from environmental protection performance, resources and energy consumption, technical and economic performance, production management and main equipment, providing a reliable basis for scientific evaluation of the operation as well as improving the operational performance of municipal wastewater treatment plant.

40 CFR 227.4 - Criteria for evaluating environmental impact.

Science.gov (United States)

2010-07-01

... impact. 227.4 Section 227.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN... Impact § 227.4 Criteria for evaluating environmental impact. This subpart B sets specific environmental... of direct environmental impact. ...

Strategies for Evaluating Complex Environmental Education Programs

Science.gov (United States)

Williams, V.

2011-12-01

Evidence for the effectiveness of environmental education programs has been difficult to establish for many reasons. Chief among them are the lack of clear program objectives and an inability to conceptualize how environmental education programs work. Both can lead to evaluations that make claims that are difficult to substantiate, such as significant changes in student achievement levels or behavioral changes based on acquisition of knowledge. Many of these challenges can be addressed by establishing the program theory and developing a logic model. However, claims of impact on larger societal outcomes are difficult to attribute solely to program activities. Contribution analysis may offer a promising method for addressing this challenge. Rather than attempt to definitively and causally link a program's activities to desired results, contribution analysis seeks to provide plausible evidence that can reduce uncertainty regarding the 'difference' a program is making to observed outcomes. It sets out to verify the theory of change behind a program and, at the same time, takes into consideration other influencing factors. Contribution analysis is useful in situations where the program is not experimental-there is little or no scope for varying how the program is implemented-and the program has been funded on the basis of a theory of change. In this paper, the author reviews the feasibility of using contribution analysis as a way of evaluating the impact of the GLOBE program, an environmental science and education program. Initially conceptualized by Al Gore in 1995, the program's implementation model is based on worldwide environmental monitoring by students and scientists around the globe. This paper will make a significant and timely contribution to the field of evaluation, and specifically environmental education evaluation by examining the usefulness of this analysis for developing evidence to assess the impact of environmental education programs.

Corporate Social Responsibility Disclosure, Environmental Performance, and Tax Aggressiveness

Directory of Open Access Journals (Sweden)

Dahlia Sari

2016-08-01

Full Text Available This study aims to examine the influence of the corporate taxpayers’ level of CSR disclosure and environmental performance on the level of tax aggressiveness. This study took a sample of non-financial companies listed on the Indonesian Stock Exchange during 2009-2012. This study shows that the corporate taxpayers’ level of CSR disclosure has significant negative effect towards the tax aggressiveness. It means the higher the level of the CSR disclosure, the lower the company’s tax aggressiveness. This study also proves that good environmental performance will strengthen the negative effect of CSR disclosure on tax aggressiveness. The assessment of environmental performance is conducted by the Ministry of Environment as independent party. It means that the higher the score of company’s environmental performance, the higher the commitment to pay taxes. This study supports the view that more socially responsible corporations are likely to be less tax aggressive.

An Introduction to "My Environmental Education Evaluation Resource Assistant" (MEERA), a Web-Based Resource for Self-Directed Learning about Environmental Education Program Evaluation

Science.gov (United States)

Zint, Michaela

2010-01-01

My Environmental Education Evaluation Resource Assistant or "MEERA" is a web-site designed to support environmental educators' program evaluation activities. MEERA has several characteristics that set it apart from other self-directed learning evaluation resources. Readers are encouraged to explore the site and to reflect on the role that…

Evaluating minerals of environmental concern using spectroscopy

Science.gov (United States)

Swayze, G.A.; Clark, R.N.; Higgins, C.T.; Kokaly, R.F.; Livo, K. Eric; Hoefen, T.M.; Ong, C.; Kruse, F.A.

2006-01-01

Imaging spectroscopy has been successfully used to aid researchers in characterizing potential environmental impacts posed by acid-rock drainage, ore-processing dust on mangroves, and asbestos in serpentine mineral deposits and urban dust. Many of these applications synergistically combine field spectroscopy with remote sensing data, thus allowing more-precise data calibration, spectral analysis of the data, and verification of mapping. The increased accuracy makes these environmental evaluation tools efficient because they can be used to focus field work on those areas most critical to the research effort. The use of spectroscopy to evaluate minerals of environmental concern pushes current imaging spectrometer technology to its limits; we present laboratory results that indicate the direction for future designs of imaging spectrometers.

Fuzzy comprehensive evaluation of multiple environmental factors for swine building assessment and control.

Science.gov (United States)

Xie, Qiuju; Ni, Ji-Qin; Su, Zhongbin

2017-10-15

In confined swine buildings, temperature, humidity, and air quality are all important for animal health and productivity. However, the current swine building environmental control is only based on temperature; and evaluation and control methods based on multiple environmental factors are needed. In this paper, fuzzy comprehensive evaluation (FCE) theory was adopted for multi-factor assessment of environmental quality in two commercial swine buildings using real measurement data. An assessment index system and membership functions were established; and predetermined weights were given using analytic hierarchy process (AHP) combined with knowledge of experts. The results show that multi-factors such as temperature, humidity, and concentrations of ammonia (NH 3 ), carbon dioxide (CO 2 ), and hydrogen sulfide (H 2 S) can be successfully integrated in FCE for swine building environment assessment. The FCE method has a high correlation coefficient of 0.737 compared with the method of single-factor evaluation (SFE). The FCE method can significantly increase the sensitivity and perform an effective and integrative assessment. It can be used as part of environmental controlling and warning systems for swine building environment management to improve swine production and welfare. Copyright © 2017 Elsevier B.V. All rights reserved.

Evaluation of safety practices and performance in a brewery industry ...

African Journals Online (AJOL)

Evaluation of safety practices and performance in a brewery industry in Nigeria between 2000 – 2007. ... Journal of Applied Sciences and Environmental Management ... The study revealed that a total of 156 accidents were prevented in the period of the safety programme which translates to an average of 19.45 per year.

Environmental Performance in Countries Worldwide: Determinant Factors and Multivariate Analysis

Directory of Open Access Journals (Sweden)

Isabel Gallego-Alvarez

2014-11-01

Full Text Available The aim of this study is to analyze the environmental performance of countries and the variables that can influence it. At the same time, we performed a multivariate analysis using the HJ-biplot, an exploratory method that looks for hidden patterns in the data, obtained from the usual singular value decomposition (SVD of the data matrix, to contextualize the countries grouped by geographical areas and the variables relating to environmental indicators included in the environmental performance index. The sample used comprises 149 countries of different geographic areas. The findings obtained from the empirical analysis emphasize that socioeconomic factors, such as economic wealth and education, as well as institutional factors represented by the style of public administration, in particular control of corruption, are determinant factors of environmental performance in the countries analyzed. In contrast, no effect on environmental performance was found for factors relating to the internal characteristics of a country or political factors.

The effect of mandatory agro-environmental policy on farm environmental performance

OpenAIRE

Jaraite, Jurate; Kažukauskas, Andrius

2011-01-01

The EU farmers are subject to mandatory cross compliance measures requiring them to meet environmental conditions to be eligible for public support. These obligations reinforce incentives for the farmers to change their behaviour towards the environment. We apply quasi-experimental methods to measure the causal relationship between cross-compliance and farm environmental performance. We find that cross compliance reduced farm fertiliser and pesticide expenditure. This result also holds for fa...

Evaluation of NEPA-based environmental commitments at four geopressure design wells

Energy Technology Data Exchange (ETDEWEB)

Reed, A.W.; Hunsaker, D.B. Jr.; Roop, R.D.; Webb, J.W.

1983-09-01

The implementation of environmental mitigation and monitoring commitments made for four geopressure design well projects was evaluated. The evaluation was based on site visits conducted in August 1982 and April 1983 and on a review of monitoring and project activity reports provided by DOE contractors. The projects evaluated include: Pleasant Bayou No. 1 in Brazoria County, Texas; Dow Parcperdue in Vermilion Parish, Louisiana; and Gladys McCall and Sweet Lake No. 1 well sites in Cameron Parish, Louisiana. The contractors responsible for drilling and testing activities at the well sites have adequately implemented most of the mitigation measures described in each project's site-specific Environmental Assessment (EA). Exceptions include the lack of impermeable liners for drilling mud pits at the Dow Parcperdue, Gladys McCall, and Pleasant Bayou sites and the lack of a ring levee at the Pleasant Bayou site. Air and water quality and noise monitoring activities were not performed as strictly as outlined in the EAs. A review of the monitoring data collected to date indicates that no significant environmental degradation has occurred. This report recommends additional or future monitoring needs, especially with regard to soil contamination, subsidence, and microseismicity, and provides guidance for decommissioning.

Comparative environmental performance of lignocellulosic ethanol from different feedstocks

Energy Technology Data Exchange (ETDEWEB)

Gonzalez-Garcia, Sara; Moreira, M. Teresa; Feijoo, Gumersindo [Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782 Santiago de Compostela (Spain)

2010-09-15

A renewable biofuel economy is projected as a pathway to decrease dependence on fossil fuels as well as to reduce greenhouse gases (GHG) emissions. Ethanol produced on large-scale from lignocellulosic raw materials is considered the most potential next generation automotive fuel. In this paper, a Life Cycle Assessment model was developed to evaluate the environmental implications of the production of ethanol from five lignocellulosic materials: alfalfa stems, poplar, Ethiopian mustard, flax shives and hemp hurds and its use in passenger cars. Two ethanol-based fuel applications, E10 (a mixture of 10% ethanol and 90% gasoline by volume) and E85 (85% ethanol and 15% gasoline by volume) were assessed and the results were compared to those of conventional gasoline (CG) in an equivalent car. The environmental performance was assessed in terms of fossil fuels requirements, global warming, photochemical oxidant formation, acidification and eutrophication by means of the Life Cycle Assessment (LCA) methodology in order to identify the best environmental friendly lignocellulosic source. The results show that, compared to CG, life cycle greenhouse gases emissions are lower for etanol blends, specifically up to 145% lower for E85-fueled car derived from Ethiopian mustard. This crop is also the best option in terms of eutrophying emissions regardless the ratio of ethanol in the blend. In the remaining impact categories, other feedstocks are considered beneficial, that is, poplar in the case of photochemical oxidants formation and flax shives for acidification. Concerning fossil fuels requirements, decreases up to 10% and 63% for E10 and E85 derived from hemp hurds and Ethiopian mustard, respectively, were obtained. According to the results, the study clearly demonstrates the importance of using low intensive energy and high biomass yield crops. LCA procedure helps to identify the key areas in the ethanol production life cycle where the researchers and technicians need to work

Local versus Global Environmental Performance of Dairying and Their Link to Economic Performance: A Case Study of Swiss Mountain Farms

Directory of Open Access Journals (Sweden)

Nina Repar

2016-12-01

Full Text Available Complying with the carrying capacity of local and global ecosystems is a prerequisite to ensure environmental sustainability. Based on the example of Swiss mountain dairy farms, the goal of our research was firstly to investigate the relationship between farm global and local environmental performance. Secondly, we aimed to analyse the relationship between farm environmental and economic performance. The analysis relied on a sample of 56 Swiss alpine dairy farms. For each farm, the cradle-to-farm-gate life cycle assessment was calculated, and the quantified environmental impacts were decomposed into their on- and off-farm parts. We measured global environmental performance as the digestible energy produced by the farm per unit of global environmental impact generated from cradle-to-farm-gate. We assessed local environmental performance by dividing farm-usable agricultural area by on-farm environmental impact generation. Farm economic performance was measured by work income per family work unit, return on equity and output/input ratio. Spearman’s correlation analysis revealed no significant relationship, trade-offs or synergies between global and local environmental performance indicators. Interestingly, trade-offs were observed far more frequently than synergies. Furthermore, we found synergies between global environmental and economic performance and mostly no significant relationship between local environmental and economic performance. The observed trade-offs between global and local environmental performance mean that, for several environmental issues, any improvement in global environmental performance will result in deterioration of local environmental performance and vice versa. This finding calls for systematic consideration of both dimensions when carrying out farm environmental performance assessments.

Analysis of the Energy Performance of the Chesapeake Bay Foundation's Philip Merrill Environmental Center

Energy Technology Data Exchange (ETDEWEB)

Griffith, B.; Deru M.; Torcellini, P.; Ellis, P.

2005-04-01

The Chesapeake Bay Foundation designed their new headquarters building to minimize its environmental impact on the already highly polluted Chesapeake Bay by incorporating numerous high-performance energy saving features into the building design. CBF then contacted NREL to perform a nonbiased energy evaluation of the building. Because their building attracted much attention in the sustainable design community, an unbiased evaluation was necessary to help designers replicate successes and identify and correct problem areas. This report focuses on NREL's monitoring and analysis of the overall energy performance of the building.

The performance evaluation of fabricated solar still in local environmental conditions

International Nuclear Information System (INIS)

Memon, A.H.; Akhund, M.A.; Leghari, A.N.

2005-01-01

To investigate the effectiveness and performance of the fabricated solar distill unit in local environmental conditions of Nawabshah within the temperature range of 23 deg. C to 28 deg. C in terms of quantity and quality of distilled water, an experimental based study was carried out during the month of March. Various samples of water with different degrees of hardness were collected from the different areas in the vicinity of Nawabshah University and supplied to the unit in order to desalinize the saline water. All samples after distillation were chemically analyzed at laboratory; the concentrations of salts were reduced at remarkable level and performance of unit was excellent especially in terms of quality. The chemical composition of analyzed samples shows that the TDS value is decreased from 2259 ppm to 378 ppm, EC (micro s/cm) value from 3.53 to 0.59, pH value from 8.4 to 7.7. The values of other parameters (i.e. Ca, Mg, Na, K, HCO/sub 3/, SO/sub 4/, Cl, SAR, and RSC) were also reduced at significant level. By comparing results, it is evident that the water is purified to the satisfactory level, which indicated that the fabricated unit has a good capability of desalination. The results indicate that the distilled water can be used for the drinking purposes as well as for the irrigation purposes also. All values of various parameters are within range of standard values. (author)

Improving the environmental performance of biofuels with industrial symbiosis

International Nuclear Information System (INIS)

Martin, Michael; Eklund, Mats

2011-01-01

In the production of biofuels for transport many critics have argued about the poor energy efficiency and environmental performance of the production industries. Optimism is thus set on the production of second generation biofuels, while first generation biofuels continue to dominate worldwide. Therefore it is interesting to consider how the environmental performance of first generation biofuel industries can be improved. The field of industrial symbiosis offers many possibilities for potential improvements in the biofuel industry and theories from this research field are used in this paper to highlight how environmental performance improvements can be accomplished. This comes in the form of by-product synergies and utility synergies which can improve material and energy handling. Furthermore, the processes and products can gain increased environmental performance improvements by the adaption of a renewable energy system which will act as a utility provider for many industries in a symbiotic network. By-products may thereafter be upcycled through biogas production processes to generate both energy and a bio-fertilizer. A case study of an actual biofuel industrial symbiosis is also reviewed to provide support for these theories. -- Highlights: → By-product and utility synergies may improve the production processes of biofuel industries for reduced energy consumption and improved environmental performance. → Upcycling tenants can make use of wastes to upgrade waste to a valuable product and/or energy source. → Energy systems for biofuel production have a large influence on the performance of biofuel industries.

Long-term energy planning with uncertain environmental performance metrics

International Nuclear Information System (INIS)

Parkinson, Simon C.; Djilali, Ned

2015-01-01

Highlights: • Environmental performance uncertainty considered in a long-term energy planning model. • Application to electricity generation planning in British Columbia. • Interactions with climate change mitigation and adaptation strategy are assessed. • Performance risk-hedging impacts the technology investment strategy. • Sensitivity of results to model formulation is discussed. - Abstract: Environmental performance (EP) uncertainties span a number of energy technology options, and pose planning risk when the energy system is subject to environmental constraints. This paper presents two approaches to integrating EP uncertainty into the long-term energy planning framework. The methodologies consider stochastic EP metrics across multiple energy technology options, and produce a development strategy that hedges against the risk of exceeding environmental targets. Both methods are compared within a case study of emission-constrained electricity generation planning in British Columbia, Canada. The analysis provides important insight into model formulation and the interactions with concurrent environmental policy uncertainties. EP risk is found to be particularly important in situations where environmental constraints become increasingly stringent. Model results indicate allocation of a modest risk premium in these situations can provide valuable hedging against EP risk

Effects of ownership and financial performance on corporate environmental performance

Czech Academy of Sciences Publication Activity Database

Earnhart, D.; Lízal, Lubomír

2006-01-01

Roč. 34, č. 1, (2006), s. 111-129 ISSN 0147-5967 Institutional research plan: CEZ:MSM0021620846 Keywords : Czech Republic * environmental protection * financial performance Subject RIV: AH - Economics Impact factor: 0.964, year: 2006

Selecting Environmental Performance Indicators : The Case of Numico

NARCIS (Netherlands)

Scherpereel, C.; Koppen, van C.S.A.; Heering, G.B.F.

2001-01-01

In order to achieve both efficient and reliable external communication adapted to the company's specific conditions, it is desirable to establish a clear relation between the environmental performance indicators (EPIs) used internally for environmental management and the EPIs used externally for

Evaluating the Environmental Performance of the U.S. Next Generation Air Transportation System

Science.gov (United States)

Graham, Michael; Augustine, Stephen; Ermatinger, Christopher; Difelici, John; Thompson, Terence R.; Marcolini, Michael A.; Creedon, Jeremiah F.

2009-01-01

The environmental impacts of several possible U.S. Next Generation Air Transportation scenarios have been quantitatively evaluated for noise, air-quality, fuel-efficiency, and CO2 impacts. Three principal findings have emerged. (1) 2025 traffic levels about 30% higher than 2006 are obtained by increasing traffic according to FAA projections while also limiting traffic at each airport using reasonable ratios of demand to capacity. NextGen operational capabilities alone enable attainment of an additional 10-15% more flights beyond that 2025 baseline level with negligible additional noise, air-quality, and fuel-efficiency impacts. (2) The addition of advanced engine and airframe technologies provides substantial additional reductions in noise and air-quality impacts, and further improves fuel efficiency. 2025 environmental goals based on projected system-wide improvement rates of about 1% per year for noise and fuel-efficiency (an air-quality goal is not yet formulated) are achieved using this new vehicle technology. (3) Overall air-transport "product", as measured by total flown distance or total payload distance, increases by about 50% relative to 2006, but total fuel consumption and CO2 production increase by only about 40% using NextGen operational capabilities. With the addition of advanced engine/airframe technologies, the increase in total fuel consumption and CO2 production can be reduced to about 30%.

Sociopolitical and economic elements to explain the environmental performance of countries.

Science.gov (United States)

Almeida, Thiago Alexandre das Neves; García-Sánchez, Isabel-María

2017-01-01

The present research explains environmental performance using an ecological composite index as the dependent variable and focusing on two national dimensions: sociopolitical characteristics and economics. Environmental performance is measured using the Composite Index of Environmental Performance (CIEP) indicator proposed by García-Sánchez et al. (2015). The first model performs a factor analysis to aggregate the variables according to each analyzed dimension. In the second model, the estimation is run using only single variables. Both models are estimated using generalized least square estimation (GLS) using panel data from 152 countries and 6 years. The results show that sociopolitical factors and international trade have a positive effect on environmental performance. When the variables are separately analyzed, democracy and social policy have a positive effect on environmental performance while transport, infrastructure, consumption of goods, and tourism have a negative effect. Further observation is that the trade-off between importing and exporting countries overshadows the pollution caused by production. It was also observed that infrastructure has a negative coefficient for developing countries and positive for developed countries. The best performances are in the democratic and richer countries that are located in Europe, while the worst environmental performance is by the nondemocratic and the poorest countries, which are on the African continent.

The improvement of environmental performances by applying ISO 14001 standard: A case study

Directory of Open Access Journals (Sweden)

Živković Snežana

2013-01-01

Full Text Available This paper presents the analysis of the advantages of applying ISO 14001 system in an environmental protection management system. The environmental protection management system which is not licensed, i.e., compatible with the principles and standard pre-conditions considerably increases the plausibility for ecological risk. There are some issues that remain to be solved in the areas which are not expressed by financial values only but also have a non-financial character with the aim of expanding markets, company image improvement and improvement of the environmental performance indicators. By improving a company’s environmental management system efficiency we expect to achieve the minimization and elimination of damaging influences on the environment which are the consequence of company’s activities. A case study in the Oil Refinery Belgrade (RNB analyses the implementation of the standard ISO 14001:2004 into its environment protection management system, particularly emphasizing the company’s own way of evaluating the environment aspects with the aim of establishing results of ecological performances indicators improvement. The average values of the first ecological indicator of the plant, the total amount of the waste waters in m3 per a ton of product, clearly show the downturn trend, which is confirmed by the proportional reduction of the second ecological plant indicator, that is by the flocculants consumption (Al2(SO43, Na2CO3 in kg per m3 of the waste water of the Oil Refinery of Belgrade for the given period 2008-2010. Case study RNB confirms the improvement of environmental performances using the ISO 14001 standard.

Evaluation of environmental impacts of cellulosic ethanol using life cycle assessment with technological advances over time

International Nuclear Information System (INIS)

Pawelzik, Paul F.; Zhang, Qiong

2012-01-01

Life Cycle Assessment (LCA) has been used in quantifying the environmental impacts of materials, processes, products, or systems across their entire lifespan from creation to disposal. To evaluate the environmental impact of advancing technology, Life Cycle Assessment with Technological Advances over Time (LCA-TAT) incorporates technology improvements within the traditional LCA framework. In this paper, the LCA-TAT is applied to quantify the environmental impacts of ethanol production using cellulosic biomass as a feedstock through the simultaneous saccharification and co-fermentation (SSCF) process as it improves over time. The data for the SSCF process are taken from the Aspen Plus ® simulation developed by the National Renewable Energy Lab (NREL). The Environmental Fate and Risk Assessment Tool (EFRAT) is used to calculate the fugitive emissions and SimaPro 7.1 software is used to quantify the environmental impacts of processes. The impact indicators of the processes are calculated using the Eco-indicator 95 method; impact categories analyzed include ozone layer depletion, heavy metals, carcinogens, summer smog, winter smog, pesticides, greenhouse effect, acidification, and eutrophication. Based on the LCA-TAT results, it is found that removal of the continuous ion exchange step within the pretreatment area increases the environmental impact of the process. The main contributor to the increase in the environmental impact of the process is the heavy metal indicator. In addition, a sensitivity analysis is performed to identify major inputs and outputs that affect environmental impacts of the overall process. Based on this analysis it is observed that an increase in waste production and acid use have the greatest effect on the environmental impacts of the SSCF process. Comparing economic analysis with projected technological advances performed by NREL, the improvement in environmental impact was not matched by a concomitant improvement in economic performance. In

Evaluation of environmental qualification period for Conax electrical penetration assemblies. Final report

International Nuclear Information System (INIS)

Doroshuk, B.; Hager, M.; Brown, R.

1995-05-01

This report evaluates the environmental qualification period of Conax electrical penetration assemblies (EPAs) for extension from forty (40) years to sixty (60) years. The evaluation was performed based on a review of Conax EPAs supplied to Baltimore Gas ampersand Electric's (BGE) Calvert Cliffs Nuclear Power Plant Units 1 and 2. The report has been prepared so that it may be of use to any utility involved in the extension of the environmental qualification period for Conax EPAs installed in their plant(s). The report includes a section on the strategy which was developed for the effort to extend the qualified lives of the Conax EPAs. A review of documentation and plant conditions specific to BGE is included in the report to demonstrate the methodology. The documentation included qualification testing performed by Conax of the materials of construction of the EPA models. The plant conditions reviewed included both normal and accident environments, both of which are specific to Calvert Cliffs Nuclear Power Plant Units 1 and 2. This report can be used as a guide in the evaluation of similar installations of Conax electrical penetration assemblies in other nuclear power plants by applying the methodologies used herein in conjunction with the plant specific test reports, materials, and conditions

Development of a Framework for the Evaluation of the Environmental Benefits of Controlled Traffic Farming

Directory of Open Access Journals (Sweden)

Abdul Mounem Mouazen

2015-07-01

Full Text Available Although controlled traffic farming (CTF is an environmentally friendly soil management system, no quantitative evaluation of environmental benefits is available. This paper aims at establishing a framework for quantitative evaluation of the environmental benefits of CTF, considering a list of environmental benefits, namely, reducing soil compaction, runoff/erosion, energy requirement and greenhouse gas emission (GHG, conserving organic matter, enhancing soil biodiversity and fertiliser use efficiency. Based on a comprehensive literature review and the European Commission Soil Framework Directive, the choice of and the weighting of the impact of each of the environmental benefits were made. The framework was validated using data from three selected farms. For Colworth farm (Unilever, UK, the framework predicted the largest overall environmental benefit of 59.3% of the theoretically maximum achievable benefits (100%, as compared to the other two farms in Scotland (52% and Australia (47.3%. This overall benefit could be broken down into: reducing soil compaction (24%, tillage energy requirement (10% and GHG emissions (3%, enhancing soil biodiversity (7% and erosion control (6%, conserving organic matter (6%, and improving fertiliser use efficiency (3%. Similar evaluation can be performed for any farm worldwide, providing that data on soil properties, topography, machinery, and weather are available.

Evaluation of environmental impact predictions

International Nuclear Information System (INIS)

Cunningham, P.A.; Adams, S.M.; Kumar, K.D.

1977-01-01

An analysis and evaluation of the ecological monitoring program at the Surry Nuclear Power Plant showed that predictions of potential environmental impact made in the Final Environmental Statement (FES), which were based on generally accepted ecological principles, were not completely substantiated by environmental monitoring data. The Surry Nuclear Power Plant (Units 1 and 2) was chosen for study because of the facility's relatively continuous operating history and the availability of environmental data adequate for analysis. Preoperational and operational fish monitoring data were used to assess the validity of the FES prediction that fish would congregate in the thermal plume during winter months and would avoid the plume during summer months. Analysis of monitoring data showed that fish catch per unit effort (CPE) was generally high in the thermal plume during winter months; however, the highest fish catches occurred in the plume during the summer. Possible explanations for differences between the FES prediction and results observed in analysis of monitoring data are discussed, and general recommendations are outlined for improving impact assessment predictions

Assessing environmental performance in the European Union: Eco-innovation versus catching-up

International Nuclear Information System (INIS)

Beltrán-Esteve, Mercedes; Picazo-Tadeo, Andrés J.

2017-01-01

This paper assesses environmental performance in the European Union (EU) using Luenberger productivity indicators, directional distance functions and Data Envelopment Analysis techniques. It considers four indicators of the pressures exerted by economic activity on the environment: global warming, tropospheric ozone formation, acidification and particulate formation. The change in environmental performance from the early 2000s onwards is decomposed at the levels of country and environmental pressure, and as the result of eco-innovations and catching-up with the best available environmental technologies; furthermore, we distinguish between the periods of economic growth (2001–07) and severe crisis (2007–13). Our main finding is that environmental performance improved in both periods, mainly fuelled by advances in environmental technology. Accordingly, environmental policies aimed at boosting catching-up are highly recommended, particularly in the newer member states that joined the EU from 2004 onwards, which perform further away from their respective environmental technological frontiers. In addition, re-establishing the pre-crisis eco-innovation investment levels would also be highly advisable in order to return to the rates of environmental technical progress registered in the expansion period. - Highlights: • Environmental performance has noticeably improved in the EU since the 2000's. • Eco-innovations have bolstered progress in environmental performance. • Policies aimed at boosting catching-up are highly recommended in the EU.

WIPP Recertification - An Environmental Evaluation Group Perspective

International Nuclear Information System (INIS)

Allen, L. E.; Silva, M. K.

2003-01-01

The Waste Isolation Pilot Plant (WIPP), a repository for defense transuranic (TRU) waste, was built and is operated by the U.S. Department of Energy (DOE). The WIPP Land Withdrawal Act (LWA) required initial certification of compliance of the WIPP by the U.S. Environmental Protection Agency (EPA). In addition, a recertification decision is required by the LWA every five years, dated from the initial receipt of TRU waste. The first TRU waste shipment arrived at the WIPP on March 26, 1999, and therefore the first recertification application is due from DOE to EPA by March 25, 2004. The Environmental Evaluation Group (EEG) provides technical oversight of the WIPP project on behalf of the State of New Mexico. The EEG considers the first recertification as a precedent setting event. Therefore, the EEG began the identification of recertification issues immediately following the initial certification decision. These issues have evolved since that time, based on discussions with the DOE and EEG's understanding of DOE's ongoing research. Performance assessment is required by the EPA certification and its results are needed to determine whether the facility remains in compliance at the time of the recertification application. The DOE must submit periodic change reports to the EPA which summarize activities and conditions that differ from the compliance application. Also, the EPA may request additional information from the DOE that may pertain to continued compliance. These changes and new information must be considered for recertification performance assessment

Environmental Management Performance Report

International Nuclear Information System (INIS)

EDER, D.M.

2002-01-01

The purpose of this report is to provide the Department of Energy Richland Operations Office (RL) a monthly summary of the Central Plateau Contractor's Environmental Management (EM) performance by Fluor Hanford (FH) and its subcontractors. Only current FH workscope responsibilities are described and other contractor/RL managed work is excluded. Please refer to other sections (BHI, PNNL) for other contractor information. Section A, Executive Summary, provides an executive level summary of the cost, schedule, and technical performance described in this report. It summarizes performance for the period covered, highlights areas worthy of management attention, and provides a forward look to some of the upcoming key performance activities as extracted from the contractor baseline. The remaining sections provide detailed performance data relative to each individual subproject (e.g., Plutonium Finishing Plant, Spent Nuclear Fuels, etc.), in support of Section A of the report. All information is updated as of January 31, 2002 unless otherwise noted. ''Stoplight'' boxes are used to indicate at a glance the condition of a particular safety area. Green boxes denote either (1) the data are stable at a level representing ''acceptable'' performance, or (2) an improving trend exists. Yellows denote the data are stable at a level from which improvement is needed. Red denotes a trend exists in a non-improving direction

EVALUATION OF ENVIRONMENTAL REPORTING FOR COMPANIES LISTED ON THE LONDON STOCK EXCHANGE

Directory of Open Access Journals (Sweden)

Ienciu Ionel-Alin

2011-12-01

Full Text Available Environmental aspects have become significant for an increasing number of companies and can have, under certain circumstances, a significant impact on financial statements. A large number of studies can be outlined in time analyzing the variation of environmental reporting (Deegan et al, 2002; O'Donovan, 2002; Holland and Foo, 2003; Nyquist, 2003; Cormier et al, 2005; Yusoff et al, 2006; Jorgensen and Sodorstrom, 2006; Taylor and Shan, 2007; Sumiani et al, 2007. The main objective targeted by this study is the evaluation of environmental reporting for the European companies listed on the London Stock Exchange. In order to achieve the proposed objective, we have completed an longitudinal and transversal analysis of environmental reporting within companies listed on FTSE 100, monitoring first of all the way in which these companies report non-financial and financial aspects related to environmental impact as well as how these reports are being audited. For each annual statement or sustainable report, we have analized the level of environmental reporting. The evaluation of how information on environmental impact are being reported is based on four categories of information: information on indicators (technical, financial that would reflect the environmental impact (water, air, soil, information regarding the financial indicators (investments, assets and other environmental costs, debts and provisions, non-financial information (related to the company's comitment, objectives, programs, management, future perspectives etc, information on environmental audit. Analysing the results we have obtained, the following can be outlined a certain increasing trend on the level and relevance of environmental information supplied for the companies listed on FTSE 100. Only 22 of the analysed companies are reporting the environmental performance indicators recommended by accredited bodies such as the GRI Guidelines (the most complex guidance in this respect. 20 of

Environmental Management Performance Report July 2000

Energy Technology Data Exchange (ETDEWEB)

EDER, D.M.

2000-07-01

The purpose of this report is to provide the Department of Energy Richland Operations Office (DOE-RL) a monthly summary of the Project Hanford Management Contractor's (PHMC) Environmental Management (EM) performance by Fluor Hanford (FH) and its subcont.

Benchmarking the environmental performances of farms

NARCIS (Netherlands)

Snoo, de G.R.

2006-01-01

Background, Aim and Scope The usual route for improvement of agricultural practice towards sustainability runs via labelling schemes for products or farm practices. In most approaches requirements are set in absolute terms, disregarding the variation in environmental performance of farms. Another

The environmental performance of SMEs in the Brazilian textile industry and the relationship with their financial performance.

Science.gov (United States)

Lucato, Wagner Cezar; Costa, Elpidio Moreira; de Oliveira Neto, Geraldo Cardoso

2017-12-01

Currently, the concern with the environment is increasing and organizations seek solutions to preserve nature and at the same time earn higher profits or competitiveness. For this, they make frequent use of structured procedures in order to reduce their costs and expenses. However, it has not been always considered the environmental performance related to the financial performance of these processes. Therefore, this study aimed to investigate the relationship between environmental performance measured by eco-efficiency level with the financial performance of small and medium textile manufacturing companies. This study was done through a survey conducted in the interest of research companies in the state of Paraná in Brazil, where financial and environmental performance indicators were measured. The data analysis and validation of the hypotheses proposed, to some extent showed a surprising result because the larger the size of the company, the worst its environmental performance measured by their eco-efficiency level. On the other hand, it was not possible to identify a statistically significant relationship between environmental and financial performances of the companies surveyed. Therefore, it is concluded that this study is in line with those authors who claim not to be possible to establish a direct relationship between environmental and financial performances of companies, in opposition of another group of authors who claim contrariwise. Copyright © 2017 Elsevier Ltd. All rights reserved.

DOE methods for evaluating environmental and waste management samples

International Nuclear Information System (INIS)

Goheen, S.C.; McCulloch, M.; Thomas, B.L.; Riley, R.G.; Sklarew, D.S.; Mong, G.M.; Fadeff, S.K.

1993-03-01

DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) provides applicable methods in use by. the US Department of Energy (DOE) laboratories for sampling and analyzing constituents of waste and environmental samples. The development of DOE Methods is supported by the Laboratory Management Division (LMD) of the DOE. This document contains chapters and methods that are proposed for use in evaluating components of DOE environmental and waste management samples. DOE Methods is a resource intended to support sampling and analytical activities that will aid in defining the type and breadth of contamination and thus determine the extent of environmental restoration or waste management actions needed, as defined by the DOE, the US Environmental Protection Agency (EPA), or others

DOE methods for evaluating environmental and waste management samples.

Energy Technology Data Exchange (ETDEWEB)

Goheen, S C; McCulloch, M; Thomas, B L; Riley, R G; Sklarew, D S; Mong, G M; Fadeff, S K [eds.; Pacific Northwest Lab., Richland, WA (United States)

1994-04-01

DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) provides applicable methods in use by. the US Department of Energy (DOE) laboratories for sampling and analyzing constituents of waste and environmental samples. The development of DOE Methods is supported by the Laboratory Management Division (LMD) of the DOE. This document contains chapters and methods that are proposed for use in evaluating components of DOE environmental and waste management samples. DOE Methods is a resource intended to support sampling and analytical activities that will aid in defining the type and breadth of contamination and thus determine the extent of environmental restoration or waste management actions needed, as defined by the DOE, the US Environmental Protection Agency (EPA), or others.

Factors underlying farmers’ intentions to perform unsubsidised agri-environmental measures

NARCIS (Netherlands)

Dijk, van William F.A.; Lokhorst, Anne Marike; Berendse, Frank; Snoo, de Geert R.

2016-01-01

Over the last decades there is a growing body of literature on how to enhance farmers’ participation in voluntary subsidised agri-environmental programmes. However, additional unsubsidised agri-environmental measures that farmers perform are often ignored. The willingness to perform these

Fiscal year 1998 Battelle performance evaluation agreement revision 1

Energy Technology Data Exchange (ETDEWEB)

DAVIS, T.L.

1998-10-22

Fiscal Year 1998 represents the second full year utilizing a results-oriented, performance-based contract. This document describes the critical outcomes, objectives, performance indicators, expected levels of performance, and the basis for the evaluation of the Contractors performance for the period October 1, 1997 through September 30, 1998, as required by Articles entitled Use of Objective Standards of Performance, Self Assessment and Performance Evaluation and Critical Outcomes Review of the Contract DE-AC08-76RLO1830. In partnership with the Contractor and other key customers, the Department of Energy (DOE) Richland Operations Office has defined six critical outcomes that same as the core for the Contractors performance evaluation. The Contractor also utilizes these outcomes as a basis for overall management of the Laboratory. As stated above six critical outcomes have been established for FY 1998. These outcomes are based on the following needs identified by DOE-HQ, RL and other customers of the Laboratory. Our Energy Research customer desires relevant, quality and cost effective science. Our Environmental Management customer wants technology developed, demonstrated, and deployed to solve environmental cleanup issues. To ensure the diversification and viability of the Laboratory as a National asset, RL and HQ alike want to increase the Science and Technical contributions of PNNL related to its core capabilities. RL wants improved leadership/management, cost-effective operations, and maintenance of a work environment, which fosters innovative thinking and high morale. RL and HQ alike desire compliance with environment, safety and health (ES and H) standards and disciplined conduct of operations for protection of the worker, environment, and the public, As with all of Hanford, DOE expects contribution of the Laboratory to the economic development of the Tri-Cities community, and the region, to build a new local economy that is less reliant on the Hanford mission

Energetic, exergetic, economic and environmental evaluations of geothermal district heating systems: An application

International Nuclear Information System (INIS)

Keçebaş, Ali

2013-01-01

Highlights: ► Applying exergy, economic, environment and sustainability analyses to the GDHSs. ► Assessing energy and exergy efficiencies, economic and environmental impacts. ► Calculating the energy and exergy efficiencies of 34.86% and 48.78%, respectively. ► Proposing GDHSs as the most economic heating system. ► Providing a significant contribution towards reducing the emissions of air pollution. - Abstract: This study deals with an energetic and exergetic analysis as well as economic and environmental evaluations of Afyon geothermal district heating system (AGDHS) in Afyon, Turkey. In the analysis, actual system data are used to assess the district heating system performance, energy and exergy efficiencies, specific exergy index, exergetic improvement potential and exergy losses. And, for economic and environmental evaluations, actual data are obtained from the Technical Departments. The energy and exergy flow diagrams are clearly drawn to illustrate how much destructions/losses take place in addition to the inputs and outputs. For system performance analysis and improvement, both energy and exergy efficiencies of the overall AGDHS are determined to be 34.86% and 48.78%, respectively. The efficiency improvements in heat and power systems can help achieving energy security in an environmentally acceptable way by reducing the emissions that might otherwise occur. Present application has shown that in Turkey, geothermal energy is much cheaper than the other energy sources, like fossil fuels, and makes a significant contribution towards reducing the emissions of air pollution.

Review of the impact of environmental factors on human performance

International Nuclear Information System (INIS)

Echeverria, D.; Barnes, V.; Bittner, A.

1990-01-01

The purpose of this project is to determine the effects of various environmental factors such as vibration, noise, heat, cold, and illumination on task performance in U.S. nuclear power plants. Although the effects of another environmental factor, radiation, is of concern to licensees and the Nuclear Regulatory Commission (NRC), much less attention has been paid to the potential effects of these other environmental factors. Performance effects from these environmental factors have been observed in other industries; for example, vibration can impair vision and noise can cause short- or long-term hearing loss. A primary goal of this project is to provide the technical basis for determining the likelihood of these factors affecting task performance in nuclear power plants, and thus the safety of the public

Developing guidelines for economic evaluation of environmental impacts in EIAs. Part I

International Nuclear Information System (INIS)

2005-01-01

Is the time right to introduce environmental evaluation into the Environmental Impact Assessment (EIA) system for large construction projects in China? The report analyses gaps to introducing environmental evaluation into EIAs and recommend how to bridge the gaps. The report also provides suggestions to the State Environmental Protection Administration on core elements of a guideline for environmental evaluation to include in the existing EIA guidelines. The report draws on international and Chinese research and best practice and conducts four case studies of environmental evaluation based on EIAs of investment projects e.g. a power plant, a waste water treatment plant, regional waste water irrigation, and a road construction project

Developing guidelines for economic evaluation of environmental impacts in EIAs. Part I

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

Is the time right to introduce environmental evaluation into the Environmental Impact Assessment (EIA) system for large construction projects in China? The report analyses gaps to introducing environmental evaluation into EIAs and recommend how to bridge the gaps. The report also provides suggestions to the State Environmental Protection Administration on core elements of a guideline for environmental evaluation to include in the existing EIA guidelines. The report draws on international and Chinese research and best practice and conducts four case studies of environmental evaluation based on EIAs of investment projects e.g. a power plant, a waste water treatment plant, regional waste water irrigation, and a road construction project.

A proposed framework for establishing integrated cost and performance criteria for environmental technologies. A summary report to the U.S. Department of Energy

International Nuclear Information System (INIS)

1994-05-01

Through an Interagency Agreement between the US Environmental Protection Agency (EPA) and the US Department of Energy (DOE), EPA directed a project to establish a suite of standard cost and performance criteria to guide the evaluation of environmental cleanup technologies for DOE sites. Ideally, these criteria would be ''generic'' in that they could be used as a basis for evaluating any cleanup technology for any DOE site. To be most useful, however, these criteria would also reflect the interests of diverse decisionmakers who influence DOE technology evaluation. The project was conducted by the National Environmental Technology Applications Center (NETAC), a nonprofit organization specializing in the development and commercialization of new and innovative environmental technologies for national and international markets. To accomplish the project objective, NETAC (1) developed a data gathering questionnaire, (2) interviewed government and industry decisionmakers, (3) identified previous criteria development efforts, (4) conducted a workshop, (5) evaluated workshop discussions, and (6) applied its five years' experience in commercializing environmental technologies to analyze project findings. The project resulted in the development of a unique and comprehensive resource or tool to enhance communication among decisionmakers. This resource, a ''Proposed Framework for Establishing Integrated Cost and Performance Criteria for Evaluating Environmental Cleanup Technologies for DOE Sites,'' offers decisionmakers a first-time comprehensive assessment of major technology evaluation issues by a decisionmaker group

Performance of GPS-devices for environmental exposure assessment.

Science.gov (United States)

Beekhuizen, Johan; Kromhout, Hans; Huss, Anke; Vermeulen, Roel

2013-01-01

Integration of individual time-location patterns with spatially resolved exposure maps enables a more accurate estimation of personal exposures to environmental pollutants than using estimates at fixed locations. Current global positioning system (GPS) devices can be used to track an individual's location. However, information on GPS-performance in environmental exposure assessment is largely missing. We therefore performed two studies. First, a commute-study, where the commute of 12 individuals was tracked twice, testing GPS-performance for five transport modes and two wearing modes. Second, an urban-tracking study, where one individual was tracked repeatedly through different areas, focused on the effect of building obstruction on GPS-performance. The median error from the true path for walking was 3.7 m, biking 2.9 m, train 4.8 m, bus 4.9 m, and car 3.3 m. Errors were larger in a high-rise commercial area (median error=7.1 m) compared with a low-rise residential area (median error=2.2 m). Thus, GPS-performance largely depends on the transport mode and urban built-up. Although ~85% of all errors were 50 m. Modern GPS-devices are useful tools for environmental exposure assessment, but large GPS-errors might affect estimates of exposures with high spatial variability.

A taxing environment: evaluating the multiple objectives of environmental taxes.

Science.gov (United States)

Miranda, Marie Lynn; Hale, Brack W

2002-12-15

Environmental taxes have attracted attention in recent years as a tool to internalize environmental externalities. This paper evaluates Sweden's experience with environmental taxes in the energy sector by examining how environmental taxes compare with estimated environmental externalities associated with the use of oil, coal, natural gas, and forest residue fuels. We also analyze how environmental taxes influence fuel choices in the energy sector by comparing the production, environmental, and tax costs for the same fuels. We find that (i) the Swedish environmental taxes correspond imperfectly with environmental costs; (ii) the Swedish tax and subsidy system introduces changes in fuel choice decisions; (iii) the energy users are responding to the incentives created by the tax and subsidy systems in ways that are consistent with economic theory; and (iv) the Swedish experience with environmental taxes and subsidies bears directly on wider evaluations of energy policy approaches internationally.

Remote Intimations: Performance Art and Environmental Illness

Science.gov (United States)

Bottoms, Stephen; Laffin, Julie

2012-01-01

This article explores and documents the work of leading Midwestern performance artist Julie Laffin, in the years since she developed a serious form of environmental illness (Multiple Chemical Sensitivity). This condition has effectively rendered her housebound and unable to appear in public, so that her previous live performance practice--which…

Environmental performance, 1993

International Nuclear Information System (INIS)

1994-01-01

Report describes Ontario Hydro's environmental objectives, results, and initiatives during the year. It attempts to measure how far the corporation has advanced in its understanding and mitigation of environmental concerns. The report should be placed against the backdrop of the transition occurring at Hydro as the corporation moves toward sustainable energy development (SED) practices. The report discusses corporate restructuring, the regulatory framework, and environmental spending. Then it looks at environmental initiatives (SED; environmental management system; environmental audits; environmental assessment process; emissions trading; toxic substance elimination); environmental approvals (demand-supply plan; assessments and approvals; environmental effects monitoring); energy management; non-utility generation; alternative energy technologies (solar; wind energy; fuel cells); international activities; material and waste management (solid non-hazardous wastes, reduction, recycling, reuse; hazardous materials, chemical, oils, and liquid waste, polychlorinated biphenyls -- PCBs, and wood pole preservatives); fossil combustion by-products, coal ash or oil ash, flue gas desulfurization by-product gypsum; mercury in the environment; radioactive materials and wastes, radioactive liquid chemical waste, low and intermediate-level radioactive solid waste, nuclear used fuel, tritiated heavy water; ozone-depleting substances; spills management; water management (chemical emissions, MISA; fish management; radioactive effluents; thermal effluents; zebra mussels); air management (acid gas management; greenhouse gas reductions; chemical emissions to air; ground-level ozone, NO x /VOC emissions; noise and odor complaints; particulate emissions; radioactive emissions; integrated air management); land management; and social, economic, and cultural environment

LCA for assessing the environmental performance of a company with the environmental management system ISO 14000

International Nuclear Information System (INIS)

Rigamonti, L.; Perotto, E.

2008-01-01

The environmental management system is an ordered pattern to treat and manage environmental issues and to improve the environmental performance of companies. It is proposed an example of application of LCA to a manufacturing company with ISO 14000. [it

Evaluation of collembolan trait performance as effect indicator of environmental change

DEFF Research Database (Denmark)

Krogh, Paul Henning; Petersen, Henning

several significant responses on the species level to the treatments where both taxonomic composition and extent of significant effects varied between the six sites. The basic hypothesis of the present work is that similar groups with respect to traits will respond in a similar manner to environmental...... stress across species of the local community. Furthermore, provided that the composition of traits is similar across Europe the response to environmental stress will also be similar. Hence, traits corresponding to morphological and ecological properties were subject to our analyses of treatment effects...

Evaluating the Relative Environmental Impact of Countries

OpenAIRE

Bradshaw, Corey J. A.; Giam, Xingli; Sodhi, Navjot Singh

2010-01-01

Environmental protection is critical to maintain ecosystem services essential for human well-being. It is important to be able to rank countries by their environmental impact so that poor performers as well as policy ?models? can be identified. We provide novel metrics of country-specific environmental impact ranks ? one proportional to total resource availability per country and an absolute (total) measure of impact ? that explicitly avoid incorporating confounding human health or economic i...

Gallon Model for the evaluation of environmental impacts

International Nuclear Information System (INIS)

Gallon Martinez, Juan Carlos

2003-01-01

When it is necessary to know the impact grade that will have the environment for the introduction of a project or handling plan, it is appealed to a study of environmental impact that quantifies variables of qualitative type to obtain results of quantitative type. The evaluation of environmental impacts is necessary to know which phases or actions of the different projects have negative or positive repercussions or far-reaching about the different susceptible environmental factors to receive impacts, and to determine previously, the most important aspects to determine the level of impact of the projects or handling plans. The evaluation measures the repercussions and consequences of the different activities of the industry on the environment, allowing to evaluate the future conditions of the habitat, being an excellent tool for making decisions regarding the possible future impact that can have an industrial process or project to diminish the nature

Designing environmental performance indicators (EPIs) for eco-efficiency

International Nuclear Information System (INIS)

Campbell, B.

1997-01-01

Environmental performance indicators (EPI) were discussed and a method by which companies can design indicators to help measure their progress toward greater eco-efficiency was presented. EPIs are quantitative measures of environmental performance. EPIs can measure one attribute, such as effluent released to water, or they can be a complex index. EPIs track impacts on the environment and provide information for decision making. The need for more eco-efficient companies, i.e. companies that produce useful goods and services while reducing their consumption of resources and while making efforts to reduce pollution, was emphasized

The absolute environmental performance of buildings

DEFF Research Database (Denmark)

Brejnrod, Kathrine Nykjær; Kalbar, Pradip; Petersen, Steffen

2017-01-01

Our paper presents a novel approach for absolute sustainability assessment of a building's environmental performance. It is demonstrated how the absolute sustainable share of the earth carrying capacity of a specific building type can be estimated using carrying capacity based normalization factors....... A building is considered absolute sustainable if its annual environmental burden is less than its share of the earth environmental carrying capacity. Two case buildings – a standard house and an upcycled single-family house located in Denmark – were assessed according to this approach and both were found...... to exceed the target values of three (almost four) of the eleven impact categories included in the study. The worst-case excess was for the case building, representing prevalent Danish building practices, which utilized 1563% of the Climate Change carrying capacity. Four paths to reach absolute...

Factors Influencing ISO 14001 Firm’s Perceived Environmental Performance in Malaysia

Directory of Open Access Journals (Sweden)

S. Rohati

2017-06-01

perceived environmental performance. The empirical results and insights from interviews shed lights on the practitioners as to how to enhance a firm’s environmental performance through green practices.

Environmental performances of different configurations of a material recovery facility in a life cycle perspective.

Science.gov (United States)

Ardolino, Filomena; Berto, Chiara; Arena, Umberto

2017-10-01

The study evaluated the environmental performances of an integrated material recovery facility (MRF) able to treat 32kt/y of unsorted mixed waste, made of residuals from household source separation and separate collection. The facility includes a mechanical sorting platform for the production of a solid recovered fuel (SRF) utilized in an external waste-to-energy plant, bio-cells for tunnel composting of organic fraction, and a sanitary landfill for the safe disposal of ultimate waste. All the MRF sub-units have been analysed in depth in order to acquire reliable data for a life cycle assessment study, focused on the environmental performances of different configurations of the facility. The study investigated a "past" configuration, including just mechanical sorting, landfilling and biogas combustion in a gas engine, and the "present" one, which includes also a composting unit. Two possible "future" configurations, having a gasifier inside the MRF battery limits, have been also analysed, assessing the performances of two fluidized bed reactors of different size, able to gasify only the residues generated by the sorting platform or the whole amount of produced SRF, respectively. The analysis evaluated the contributions of each unit in the different configurations and allowed a reliable assessment of the technological evolution of the facility. The results quantified the positive effect of the inclusion of an aerobic treatment of the waste organic fraction. The SRF gasification in situ appears to improve the MRF environmental performances in all the impact categories, with the exclusion of that of global warming. Copyright © 2017 Elsevier Ltd. All rights reserved.

Environmental Management Performance Report

International Nuclear Information System (INIS)

EDER, D.M.

2002-01-01

The purpose of this report is to provide the Department of Energy Richland Operations Office (RL) a monthly summary of the Central Plateau Contractor's Environmental Management (EM) performance by Fluor Hanford (FH) and its subcontractors. Only current FH workscope responsibilities are described and other contractor/RL managed work is excluded. Please refer to other sections (BHI, PNNL) for other contractor information. Section A, Executive Summary, provides an executive level summary of the cost, schedule, and technical performance described in this report. It summarizes performance for the period covered, highlights areas worthy of management attention, and provides a forward look to some of the upcoming key performance activities as extracted from the contractor baseline. The remaining sections provide detailed performance data relative to each individual subproject (e.g., Plutonium Finishing Plant, Spent Nuclear Fuels, etc.), in support of Section A of the report. All information is updated as of the end of May 2002 unless otherwise noted. ''Stoplight'' boxes are used to indicate at a glance the condition of a particular safety area. Green boxes denote either (1) the data are stable at a level representing ''acceptable'' performance, or (2) an improving trend exists. Yellows denote the data are stable at a level from which improvement is needed. Red denotes a trend exists in a non-improving direction

Performance of Hybrid Corn in Different Environmental Conditions in the Region Of Sinop-MT

Directory of Open Access Journals (Sweden)

D. C. T. Souza

2013-07-01

Full Text Available Abstract: The aim of this study was to evaluate the agronomic performance of corn hybrids in environmental conditions favorable and unfavorable. For this, two experiments were conducted at Sinop / MT, being considered as favorable environmental conditions the use of fertilizer recommended for the crop at planting and coverage, and unfavorable conditions only recommended fertilization at planting. The experimental design was a randomized block with three replicates, with plots of 2 rows of 3 meters. The treatments were: double hybrid (Balu 761, single hybrids (AG 7088 and 30F90Y and triple hybrid (2B688. The characteristics evaluated were number of spikes, husked spikes weight, plant height and height of first spike. Regarding the number of ears, under favorable conditions, the hybrid double (Balu 761 and the triple hybrid (2B688 stood out against the simple hybrid. For the character number of spikes per plant, the husked spike weight in kg the triple hybrid 2B688 stood in relation to other unfavorable conditions. Considering the character plant height and first spike insertion, single hibrid 30F90Y, showed higher estimate in unfavorable conditions. In conclusion, the agronomic performance of types of hybrids varies in relation to environmental conditions and genotypes composition, and in this study the triple hybrid stood out in relation to others. Keywords: Zea mays, fertilization and breeding.

Evaluation of environmental impact assessment system in Pakistan

International Nuclear Information System (INIS)

Nadeem, Obaidullah; Hameed, Rizwan

2008-01-01

Environmental impact assessment (EIA) was first introduced in Pakistan based on the Environmental Protection Ordinance 1983. The EIA process was further strengthened under the Pakistan Environmental Protection Act 1997, which became operational under EIA Regulations 2000. Despite a sound legal basis and comprehensive guidelines, evidence suggests that EIA has not yet evolved satisfactorily in Pakistan. An evaluation of the EIA system against systematic evaluation criteria, based on interviews with EIA approval authorities, consulting firms and experts, reveals various shortcomings of the EIA system. These mainly include; inadequate capacity of EIA approval authorities, deficiencies in screening and scoping, poor EIA quality, inadequate public participation and weak monitoring. Overall, EIA is used presently as a project justification tool rather than as a project planning tool to contribute to achieving sustainable development. Whilst shortcomings are challenging, central government has recently shown a high degree of commitment to the environmental protection by making EIA compulsory for all the public sector projects likely to have adverse environmental impacts. The paper identifies opportunities for taking advantage of the current environment for strengthening the EIA process

Environmental Performance Report 2011: Annual Site Environmental Report per the U.S. Department of Energy Order 231.1B (Management Report)

Energy Technology Data Exchange (ETDEWEB)

2012-09-01

Purpose: NREL's Environmental Performance Report provides a description of the lab's environmental activities for 2011 including information on environmental and sustainability performance, environmental compliance activities and status, and environmental protection programs, highlights, and successes.

Sustainable Supplier Performance Evaluation and Selection with Neofuzzy TOPSIS Method

OpenAIRE

Chaharsooghi, S. K.; Ashrafi, Mehdi

2014-01-01

Supplier selection plays an important role in the supply chain management and traditional criteria such as price, quality, and flexibility are considered for supplier performance evaluation in researches. In recent years sustainability has received more attention in the supply chain management literature with triple bottom line (TBL) describing the sustainability in supply chain management with social, environmental, and economic initiatives. This paper explores sustainability in supply chain...

40 CFR 63.2354 - What performance tests, design evaluations, and performance evaluations must I conduct?

Science.gov (United States)

2010-07-01

... evaluations, and performance evaluations must I conduct? 63.2354 Section 63.2354 Protection of Environment... tests, design evaluations, and performance evaluations must I conduct? (a)(1) For each performance test... procedures specified in subpart SS of this part. (3) For each performance evaluation of a continuous emission...

Environmental-pathways analysis for evaluation of a low-level waste disposal site

International Nuclear Information System (INIS)

Lee, D.W.; Ketelle, R.H.; Pin, F.G.; Hill, G.S.

1983-01-01

The suitability of a site for the shallow land burial of low-level waste is evaluated by an environmental-pathways analysis. The environmental-pathways analysis considers the probable paths for the transport of contamination to man and models the long-term transport of contamination to determine the resulting dose-to-man. The model of the long-term transport of contamination is developed for a proposed site using data obtained from a comprehensive laboratory and field investigation. The proposed site is located at the US Department of Energy Portsmouth Reservation, Piketon, Ohio and is planned to accept low-level radioactive waste generated by the enrichment of uranium. Laboratory studies were performed to characterize the waste and determine the wastes' leaching and retardation characteristics with site soils and groundwater. Comprehensive drilling, sampling and laboratory investigations were performed to provide the necessary information for interpreting the site's geology and hydrology. Field tests were performed to further quantify the site's hydrology. The pathway of greatest concern is the migration of contaminated groundwater and subsequent consumption by man. This pathway was modeled using a numerical simulation of the long-term transport of contamination. Conservative scenarios were developed for leachate generation and migration through the geohydrologic system. The dose-to-man determined from the pathways analysis formed the basis for evaluating site acceptability and providing recommendations for site design and development

Environmental pathways analysis for evaluation of a low-level waste disposal site

International Nuclear Information System (INIS)

Lee, D.W.; Ketelle, R.H.; Pin, F.G.; Hill, G.S.

1984-01-01

The suitability of a site for the shallow land burial of low-level waste is evaluated by an environmental pathways analysis. The environmental pathways analysis considers the probable paths for the transport of contamination to man and models the long-term transport of contamination to determine the resulting dose to man. The model of the long-term transport of contamination is developed for a proposed site using data obtained from a comprehensive laboratory and field investigation. The proposed site is located at the US Department of Energy Portsmouth Reservation, Piketon, Ohio, and is planned to accept low-level radioactive waste generated by the enrichment of uranium. Laboratory studies were performed to characterize the waste and determine the wastes' leaching and retardation characteristics with site soils and groundwater. Comprehensive drilling, sampling and laboratory investigations were performed to provide the necessary information for interpreting the site's geology and hydrology. Field tests were performed to further quantify the site's hydrology. The pathway of greatest concern is the migration of contaminated groundwater and subsequent consumption by man. This pathway was modelled using a numerical simulation of the long-term transport of contamination. Conservative scenarios were developed for leachate generation and migration through the geohydrologic system. The dose to man determined from the pathways analysis formed the basis for evaluating site acceptability and providing recommendations for site design and development. (author)

Environmental performance evaluation of waste management system of Uranium Concentrated Unit in Caetite city, Bahia State - Brazil

International Nuclear Information System (INIS)

Araujo, Valeska P.; Fernandes, Horst M.; Gomiero, Luis Alberto

2005-01-01

The mining/milling activities have the potential to cause risks to the human health and to the environment. In uranium mining, besides inherent damages due to any mining activities there are radiological risks, that may be incurred even in short as in long terms. The large volumes of low activity mining/milling residues produced, are the great challenge in the waste management. Nowadays, the whole Brazilian uranium production come from Uranium Concentrated Unit (URA), a facility operated by Brazilian Nuclear Industry and located at a semi-arid region, in the Caetite city, Bahia state. This Unit is composed by a open pit mine and a milling facility. The present work assess the URA waste management system, the procedures adopted, focused on its environmental performance. It was observed that the waste management system is efficient in the control of the environmental impacts, however improvement chances are detected and a better performance may be reached. Concerning the liquids wastes, it was observed that the storage systems were not projected adequately. The storage capacity was not enough to support a intense rainfall period causing a overflow to the environment. In URA activities there is no radiological risk to the public, but its necessary to improve long term actions, constraints for the post-closure phase, e.g., appropriate institutional controls, restrictions on land use. Finally, it is advisable to introduce a Environmental Management System (EMS) for the whole facility. (author)

Frontier models for evaluating environmental efficiency: an overview

NARCIS (Netherlands)

Oude Lansink, A.G.J.M.; Wall, A.

2014-01-01

Our aim in this paper is to provide a succinct overview of frontier-based models used to evaluate environmental efficiency, with a special emphasis on agricultural activity. We begin by providing a brief, up-to-date review of the main approaches used to measure environmental efficiency, with

Indexing the Environmental Quality Performance Based on A Fuzzy Inference Approach

Science.gov (United States)

Iswari, Lizda

2018-03-01

Environmental performance strongly deals with the quality of human life. In Indonesia, this performance is quantified through Environmental Quality Index (EQI) which consists of three indicators, i.e. river quality index, air quality index, and coverage of land cover. The current of this instrument data processing was done by averaging and weighting each index to represent the EQI at the provincial level. However, we found EQI interpretations that may contain some uncertainties and have a range of circumstances possibly less appropriate if processed under a common statistical approach. In this research, we aim to manage the indicators of EQI with a more intuitive computation technique and make some inferences related to the environmental performance in 33 provinces in Indonesia. Research was conducted in three stages of Mamdani Fuzzy Inference System (MAFIS), i.e. fuzzification, data inference, and defuzzification. Data input consists of 10 environmental parameters and the output is an index of Environmental Quality Performance (EQP). Research was applied to the environmental condition data set in 2015 and quantified the results into the scale of 0 to 100, i.e. 10 provinces at good performance with the EQP above 80 dominated by provinces in eastern part of Indonesia, 22 provinces with the EQP between 80 to 50, and one province in Java Island with the EQP below 20. This research shows that environmental quality performance can be quantified without eliminating the natures of the data set and simultaneously is able to show the environment behavior along with its spatial pattern distribution.

Catalyst-Free Biodiesel Production Methods: A Comparative Technical and Environmental Evaluation

Directory of Open Access Journals (Sweden)

Oseweuba Valentine Okoro

2018-01-01

Full Text Available In response to existing global focus on improved biodiesel production methods via highly efficient catalyst-free high temperature and high pressure technologies, this study considered the comparative study of catalyst-free technologies for biodiesel production as an important research area. In this study, therefore, catalyst-free integrated subcritical lipid hydrolysis and supercritical esterification and catalyst-free one step supercritical transesterification processes for biodiesel production have been evaluated via undertaking straight forward comparative energetic and environmental assessments. Energetic comparisons were undertaken after heat integration was performed since energy reduction has favourable effects on the environmental performance of chemical processes. The study confirmed that both processes are capable of producing biodiesel of high purity with catalyst-free integrated subcritical lipid hydrolysis and supercritical esterification characterised by a greater energy cost than catalyst-free one step supercritical transesterification processes for an equivalent biodiesel productivity potential. It was demonstrated that a one-step supercritical transesterification for biodiesel production presents an energetically more favourable catalyst-free biodiesel production pathway compared to the integrated subcritical lipid hydrolysis and supercritical esterification biodiesel production process. The one-step supercritical transesterification for biodiesel production was also shown to present an improved environmental performance compared to the integrated subcritical lipid hydrolysis and supercritical esterification biodiesel production process. This is because of the higher potential environment impact calculated for the integrated subcritical lipid hydrolysis and supercritical esterification compared to the potential environment impact calculated for the supercritical transesterification process, when all material and energy flows are

Organising Life-cycles in Supply Chains: Linking Environmental Performance to Managerial Designs

NARCIS (Netherlands)

Hagelaar, J.L.F.; Vorst, van der J.G.A.J.; Marcelis, W.J.

2005-01-01

In recent years increasing attention has been given to continual environmental performance improvement. Although we support the thesis that organisations are able to continuously improve their environmental performance, we state that truly higher levels of environmental care are reached only via

Proactive Corporate Environmental Responsibility and Financial Performance: Evidence from Chinese Energy Enterprises

Directory of Open Access Journals (Sweden)

Ying Jiang

2018-03-01

Full Text Available With increasing concerns about environmental issues and the advancement of China’s “going global” strategy, a new issue-proactive corporate social responsibility has emerged. Proactive corporate environmental responsibility refers to business actions that go beyond regulatory requirements for supporting sustainable environmental development. This study examines the role of proactive corporate environmental responsibility on corporate financial performance in the Chinese energy industry by the multi-variables regression analysis of panel data. Using data of 264 firm-year observations from 2009–2014 in the energy industry, the results showed that Proactive corporate environmental responsibility has a positive effect on corporate financial performance passing the endogeneity test. The results also demonstrate that private ownership has stronger promotion on the relationship between proactive corporate environmental responsibility and corporate financial performance. This study helps to increase the body of knowledge about proactive corporate environmental responsibility of the emerging economy, provides insights into the corporate environmental responsibility practice, and government environmental regulation and policy.

Covenants with Weak Swords: ISO 14001 and Facilities' Environmental Performance

Science.gov (United States)

Potoski, Matthew; Prakash, Aseem

2005-01-01

Voluntary environmental programs are codes of progressive environmental conduct that firms pledge to adopt. This paper investigates whether ISO 14001, a voluntary program with a weak sword--a weak monitoring and sanctioning mechanism--can mitigate shirking and improve participants' environmental performance. Sponsored by the International…

Use of biological indicators for evaluating environmental stress

International Nuclear Information System (INIS)

Letourneau, C.; Castonguay, J.

1988-09-01

This report examines the usefulness of biological analyses for evaluating environmental stress. All forms of stress are addressed; particular attention, however, is paid to the use of biological analyses to evaluate the impact on the environment from radioactive releases of the nuclear industry. First, we will review different biological analyses which are grouped into two approaches: the holistic approach (biotic and diversity indices) and the reductionist approach ('biological indicators' per se). Secondly, we will compare the usefulness of plants and animals as indicators based on the established criteria. This report ends with a compilation of letters received from different organizations which outline the present use in Canada of biological indicators for evaluating environmental stress

Use of biological indicators to evaluate environmental stress

International Nuclear Information System (INIS)

Letourneau, C.; Castonguay, J.

1987-09-01

This report examines the usefulness of biological analyses for evaluating environmental stress. All forms of stress are addressed; particular attention, however, is paid to the use of biological analyses to evaluate the impact on the environment from radioactive releases of the nuclear industry. First, we will review different biological analyses which are grouped into two approaches: the holistic approach (biotic and diversity indices) and the reductionist approach ('biological indicators' per se). Secondly, we will compare the usefulness of plants and animals as indicators based on the established criteria. This report ends with a compilation of letters received from different organizations which outline the present usage in Canada of biological indicators for evaluating environmental stress

1996 LMITCO environmental monitoring program report for the Idaho National Engineering and Environmental Laboratory

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-09-01

This report describes the calendar year 1996 environmental surveillance and compliance monitoring activities of the Lockheed Martin Idaho Technologies Company Environmental Monitoring Program performed at the Idaho National Engineering and Environmental Laboratory (INEEL). Results of sampling performed by the Radiological Environmental Surveillance, Site Environmental Surveillance, Drinking Water, Effluent Monitoring, Storm Water Monitoring, Groundwater Monitoring, and Special Request Monitoring Programs are included in this report. The primary purposes of the surveillance and monitoring activities are to evaluate environmental conditions, to provide and interpret data, to verify compliance with applicable regulations or standards, and to ensure protection of human health and the environment. This report compares 1996 data with program-specific regulatory guidelines and past data to evaluate trends.

1996 LMITCO environmental monitoring program report for the Idaho National Engineering and Environmental Laboratory

International Nuclear Information System (INIS)

1997-09-01

This report describes the calendar year 1996 environmental surveillance and compliance monitoring activities of the Lockheed Martin Idaho Technologies Company Environmental Monitoring Program performed at the Idaho National Engineering and Environmental Laboratory (INEEL). Results of sampling performed by the Radiological Environmental Surveillance, Site Environmental Surveillance, Drinking Water, Effluent Monitoring, Storm Water Monitoring, Groundwater Monitoring, and Special Request Monitoring Programs are included in this report. The primary purposes of the surveillance and monitoring activities are to evaluate environmental conditions, to provide and interpret data, to verify compliance with applicable regulations or standards, and to ensure protection of human health and the environment. This report compares 1996 data with program-specific regulatory guidelines and past data to evaluate trends

Environmental evaluation of agri-environment schemes using participatory approaches: Experiences of testing the Agri-Environmental Footprint Index

DEFF Research Database (Denmark)

Mauchline, Alice L.; Mortimer, Simon R.; Park, Julian P.

2012-01-01

The Agri-Environment Footprint Index (AFI) has been developed as a generic methodology to assess changes in the overall environmental impacts from agriculture at the farm level and to assist in the evaluation of European agri-environmental schemes (AES). The methodology is based on multi-criteria......The Agri-Environment Footprint Index (AFI) has been developed as a generic methodology to assess changes in the overall environmental impacts from agriculture at the farm level and to assist in the evaluation of European agri-environmental schemes (AES). The methodology is based on multi......-criteria analysis (MCA) and involves stakeholder participation to provide a locally customised evaluation based on weighted environmental indicators. The methodology was subjected to a feasibility assessment in a series of case studies across the EU. The AFI approach was able to measure significant differences....... The applicability of the AFI in routine monitoring of AES impacts and in providing feedback to improve policy design is discussed....

Environmental performance of straw-based pulp making: A life cycle perspective.

Science.gov (United States)

Sun, Mingxing; Wang, Yutao; Shi, Lei

2018-03-01

Agricultural straw-based pulp making plays a vital role in pulp and paper industry, especially in forest deficient countries such as China. However, the environmental performance of straw-based pulp has scarcely been studied. A life cycle assessment on wheat straw-based pulp making in China was conducted to fill of the gaps in comprehensive environmental assessments of agricultural straw-based pulp making. On average, the global warming potential (GWP), GWP excluding biogenic carbon, acidification potential and eutrophication potential of wheat straw based pulp making are 2299kg CO 2 -eq, 4550kg CO 2 -eq, 16.43kg SO 2 -eq and 2.56kg Phosphate-eq respectively. The dominant factors contributing to environmental impacts are coal consumption, electricity consumption, and chemical (NaOH, ClO 2 ) input. Chemical input decrease and energy recovery increase reduce the total environmental impacts dramatically. Compared with wood-based and recycled pulp making, wheat straw-based pulp making has higher environmental impacts, which are mainly due to higher energy and chemical requirements. However, the environmental impacts of wheat straw-based pulp making are lower than hemp and flax based pulp making from previous studies. It is also noteworthy that biogenic carbon emission is significant in bio industries. If carbon sequestration is taken into account in pulp making industry, wheat straw-based pulp making is a net emitter rather than a net absorber of carbon dioxide. Since wheat straw-based pulp making provides an alternative for agricultural residue management, its evaluation framework should be expanded to further reveal its environmental benefits. Copyright © 2017 Elsevier B.V. All rights reserved.

BALANCED SCORECARDS EVALUATION MODEL THAT INCLUDES ELEMENTS OF ENVIRONMENTAL MANAGEMENT SYSTEM USING AHP MODEL

Directory of Open Access Journals (Sweden)

Jelena Jovanović

2010-03-01

Full Text Available The research is oriented on improvement of environmental management system (EMS using BSC (Balanced Scorecard model that presents strategic model of measurem ents and improvement of organisational performance. The research will present approach of objectives and environmental management me trics involvement (proposed by literature review in conventional BSC in "Ad Barska plovi dba" organisation. Further we will test creation of ECO-BSC model based on business activities of non-profit organisations in order to improve envir onmental management system in parallel with other systems of management. Using this approach we may obtain 4 models of BSC that includ es elements of environmen tal management system for AD "Barska plovidba". Taking into acc ount that implementation and evaluation need long period of time in AD "Barska plovidba", the final choice will be based on 14598 (Information technology - Software product evaluation and ISO 9126 (Software engineering - Product quality using AHP method. Those standards are usually used for evaluation of quality software product and computer programs that serve in organisation as support and factors for development. So, AHP model will be bas ed on evolution criteria based on suggestion of ISO 9126 standards and types of evaluation from two evaluation teams. Members of team & will be experts in BSC and environmental management system that are not em ployed in AD "Barska Plovidba" organisation. The members of team 2 will be managers of AD "Barska Plovidba" organisation (including manage rs from environmental department. Merging results based on previously cr eated two AHP models, one can obtain the most appropriate BSC that includes elements of environmental management system. The chosen model will present at the same time suggestion for approach choice including ecological metrics in conventional BSC model for firm that has at least one ECO strategic orientation.

The Environmental Performance of Dutch Government Bond Funds

NARCIS (Netherlands)

Scholtens, B.

2010-01-01

We investigate the implications of using different indicators to assess the sustainability performance of investment funds. In particular, we look into the environmental performance of Dutch government bond funds. We find that it does matter a lot which particular indicator is used. This suggests

Fiscal year 1998 Battelle performance evaluation agreement revision 1; TOPICAL

International Nuclear Information System (INIS)

DAVIS, T.L.

1998-01-01

Fiscal Year 1998 represents the second full year utilizing a results-oriented, performance-based contract. This document describes the critical outcomes, objectives, performance indicators, expected levels of performance, and the basis for the evaluation of the Contractors performance for the period October 1, 1997 through September 30, 1998, as required by Articles entitled Use of Objective Standards of Performance, Self Assessment and Performance Evaluation and Critical Outcomes Review of the Contract DE-AC08-76RLO1830. In partnership with the Contractor and other key customers, the Department of Energy (DOE) Richland Operations Office has defined six critical outcomes that same as the core for the Contractors performance evaluation. The Contractor also utilizes these outcomes as a basis for overall management of the Laboratory. As stated above six critical outcomes have been established for FY 1998. These outcomes are based on the following needs identified by DOE-HQ, RL and other customers of the Laboratory. Our Energy Research customer desires relevant, quality and cost effective science. Our Environmental Management customer wants technology developed, demonstrated, and deployed to solve environmental cleanup issues. To ensure the diversification and viability of the Laboratory as a National asset, RL and HQ alike want to increase the Science and Technical contributions of PNNL related to its core capabilities. RL wants improved leadership/management, cost-effective operations, and maintenance of a work environment, which fosters innovative thinking and high morale. RL and HQ alike desire compliance with environment, safety and health (ES and H) standards and disciplined conduct of operations for protection of the worker, environment, and the public, As with all of Hanford, DOE expects contribution of the Laboratory to the economic development of the Tri-Cities community, and the region, to build a new local economy that is less reliant on the Hanford mission

Evaluating Three Dimensions of Environmental Knowledge and Their Impact on Behaviour

Science.gov (United States)

Braun, Tina; Dierkes, Paul

2017-09-01

This research evaluates the development of three environmental knowledge dimensions of secondary school students after participation in a singular 1-day outdoor education programme. Applying a cross-national approach, system, action-related and effectiveness knowledge levels of students educated in Germany and Singapore were assessed before and after intervention participation. Correlations between single knowledge dimensions and behaviour changes due to the environmental education intervention were examined. The authors applied a pre-, post- and retention test design and developed a unique multiple-choice instrument. Results indicate significant baseline differences in the prevalence of the different knowledge dimensions between subgroups. Both intervention subsamples showed a low presence of all baseline knowledge dimensions. Action-related knowledge levels were higher than those of system and effectiveness knowledge. Subsample-specific differences in performed pro-environmental behaviour were also significant. Both experimental groups showed significant immediate and sustained knowledge increases in the three dimensions after programme participation. Neither of the two control cohorts showed any significant increase in any knowledge dimension. Effectiveness knowledge improved most. The amount of demonstrated environmental actions increased significantly in both intervention groups. Both control cohorts did not show shifts in environmental behaviour. Yet, only weak correlations between any knowledge dimension and behaviour could be found.

Environmental Evaluation of Soil Salinity with Various Watering Technologies Assessment.

Science.gov (United States)

Seitkaziev, Adeubay; Shilibek, Kenzhegali; Fakhrudenova, Idiya; Salybayev, Satybaldy; Zhaparova, Sayagul; Duisenbayeva, Saule; Bayazitova, Zulfia; Aliya, Maimakova; Seitkazieva, Karlygash; Aubakirov, Hamit

2018-01-01

  The purpose of this study is to develop mathematical tools for evaluating the level of environmental safety of various watering technologies. A set of indicators, was developed with regard to the natural factors, the nature of the man-induced load, degradation type, and characteristics of the disruption of humification conditions. Thermal and physical characteristics of the soil, the state of its surface, and meteorological factors, including air temperature, relative humidity, precipitation, wind speed, solar radiation, etc. were studied with a view to determining the heat and air exchange in the soil. An environmental evaluation of the methods for saline land development was conducted with regard to the heat and moisture supply. This tool can be used to determine the level of environmental safety of soil salinization during the environmental evaluation of the investigation of soil salinity with various watering technologies.

Energy and environmental evaluation of tri-generation energy systems

International Nuclear Information System (INIS)

Chicco, G.; Mancarella, P.

2008-01-01

Tri generation facilities manufactured with various technologies represent an important alternative solution for the development more efficient energy systems and low environmental impact. Are described the issues related to modelling and energy and environmental evaluation [it

Evaluation of Environmental Radioactivity in Guatemala

International Nuclear Information System (INIS)

Guillen, Jorge; Perez, J.F.

1996-01-01

The paper describes the data evaluation of measurements of gamma radiation in environmental samples in soils of Guatemala using high-purity Ge detectors, also measurements of background radiation using thermoluminiscent dosimeters based on LiF 700 (from Harshaw) were carried out in the points of higher population density. From data evaluation was found that precipitation of Cesium-137 from nuclear testing is present in soils of Guatemala, the results of background measured with TLD are normal

40 CFR 63.8687 - What performance tests, design evaluations, and other procedures must I use?

Science.gov (United States)

2010-07-01

... evaluations, and other procedures must I use? 63.8687 Section 63.8687 Protection of Environment ENVIRONMENTAL... What performance tests, design evaluations, and other procedures must I use? (a) You must conduct each... run must last at least 1 hour. (e) You must use the following equations to determine compliance with...

40 CFR 63.7112 - What performance tests, design evaluations, and other procedures must I use?

Science.gov (United States)

2010-07-01

... evaluations, and other procedures must I use? 63.7112 Section 63.7112 Protection of Environment ENVIRONMENTAL..., design evaluations, and other procedures must I use? (a) You must conduct each performance test in Table... use wet dust suppression to control PM from PSH operations, a visible mist is sometimes generated by...

Corporate Social Responsibility Disclosure, Environmental Performance, and Tax Aggressiveness (P.93-104

Directory of Open Access Journals (Sweden)

Dahlia Sari

2017-02-01

Full Text Available This study aims to examine the influence of the corporate taxpayers’ level of CSR disclosure and environmental performance on the level of tax aggressiveness. This study took a sample of non-financial companies listed on the Indonesian Stock Exchange during 2009-2012. This study shows that the corporate taxpayers’ level of CSR disclosure has significant negative effect towards the tax aggressiveness. It means the higher the level of the CSR disclosure, the lower the company’s tax aggressiveness. This study also proves that good environmental performance will strengthen the negative effect of CSR disclosure on tax aggressiveness. The assessment of environmental performance is conducted by the Ministry of Environment as independent party. It means that the higher the score of company’s environmental performance, the higher the commitment to pay taxes. This study supports the view that more socially responsible corporations are likely to be less tax aggressive. Keywords: Corporate Social Responsibility Disclosure, Environmental Performance, Tax Aggressiveness

How to reconcile environmental and economic performance to improve corporate sustainability: corporate environmental strategies in the European paper industry.

Science.gov (United States)

Wagner, Marcus

2005-07-01

This paper discusses the relationship between environmental and economic performance and the influence of corporate strategies with regard to sustainability and the environment. After formulating a theoretical model, results are reported from an empirical analysis of the European paper manufacturing industry. New data are used to test hypotheses derived from the theoretical model, using environmental performance indices representing different corporate environmental strategy orientations. In particular, an emissions-based index largely reflecting end-of-pipe strategies and an inputs-based index reflecting integrated pollution prevention are distinguished. For the emissions-based index, a predominantly negative relationship between environmental and economic performance is found, whereas for the inputs-based index no significant link is found. This is consistent with the theoretical model, which predicts the possibility of different relationships. The results also show that for firms with pollution prevention-oriented corporate environmental strategies, the relationship between environmental and economic performance is more positive, thus making improvements in corporate sustainability more likely. Based on this last insight, managerial implications of this are discussed with regard to strategy choices, investment decisions and operations management.

Towards better environmental performance of wastewater sludge treatment using endpoint approach in LCA methodology

Directory of Open Access Journals (Sweden)

Isam Alyaseri

2017-03-01

Full Text Available The aim of this study is to use the life cycle assessment method to measure the environmental performance of the sludge incineration process in a wastewater treatment plant and to propose an alternative that can reduce the environmental impact. To show the damages caused by the treatment processes, the study aimed to use an endpoint approach in evaluating impacts on human health, ecosystem quality, and resources due to the processes. A case study was taken at Bissell Point Wastewater Treatment Plant in Saint Louis, Missouri, U.S. The plant-specific data along with literature data from technical publications were used to build an inventory, and then analyzed the environmental burdens from sludge handling unit in the year 2011. The impact assessment method chosen was ReCipe 2008. The existing scenario (dewatering-multiple hearth incineration-ash to landfill was evaluated and three alternative scenarios (fluid bed incineration and anaerobic digestion with and without land application with energy recovery from heat or biogas were proposed and analyzed to find the one with the least environmental impact. The existing scenario shows that the most significant impacts are related to depletion in resources and damage to human health. These impacts mainly came from the operation phase (electricity and fuel consumption and emissions related to combustion. Alternatives showed better performance than the existing scenario. Using ReCipe endpoint methodology, and among the three alternatives tested, the anaerobic digestion had the best overall environmental performance. It is recommended to convert to fluid bed incineration if the concerns were more about human health or to anaerobic digestion if the concerns were more about depletion in resources. The endpoint approach may simplify the outcomes of this study as follows: if the plant is converted to fluid bed incineration, it could prevent an average of 43.2 DALYs in human life, save 0.059 species in the area

A meta-analysis of the combined effect of housing and environmental enrichment characteristics on the behaviour and performance of pigs

NARCIS (Netherlands)

Averos, X.; Brossard, L.; Dourmad, J.Y.; Greef, de K.H.; Edge, H.L.; Edwards, S.A.; Meunier-Salaün, M.C.

2010-01-01

To quantify the combined effect of housing conditions and environmental enrichment on the behaviour and performance of pigs, a meta-analysis was performed using information from 45 experiments in 42 published manuscripts. Multiple regression models were applied to evaluate the effects of space

Labs21 environmental performance criteria Version 2.0

Energy Technology Data Exchange (ETDEWEB)

Mathew, Paul A.

2002-10-01

Laboratory facilities present a unique challenge for energy efficient and sustainable design, with their inherent complexity of systems, health and safety requirements, long-term flexibility and adaptability needs, energy use intensity, and environmental impacts. The typical laboratory is about five times as energy intensive as a typical office building and costs about three times as much per unit area. The Labs21 Environmental Performance Criteria (EPC) is a rating system for use by laboratory building project stakeholders to assess the environmental performance of laboratory facilities. Currently, the U.S. Green Building Council's LEED{trademark} Rating System is the primary tool used. However, LEED{trademark} was designed for U.S. commercial office buildings and as such, lacks some attributes essential to the sustainable design of this unique and complex building type. To facilitate widespread use and to avoid ''re-inventing the wheel'' this effort builds on the existing LEED{trademark} Rating System 2.0.

Evaluation of teaching in environmental engineering

DEFF Research Database (Denmark)

Mikkelsen, Peter Steen; Larsen, Bo Skjold; Bjerg, Poul Løgstrup

2000-01-01

This paper describes the effect of changing course content and teaching methodology for an introductory course in Environmental Processes. Student evaluations were used both to monitor the effect of the changes, as well as to change the course structure and the didactics. The result of the change...

Evaluation of environmental samples containing heavy hydrocarbon components in environmental forensic investigations

Energy Technology Data Exchange (ETDEWEB)

Raia, J.C.; Blakley, C.R.; Fuex, A.N.; Villalanti, D.C.; Fahrenthold, P.D. [Triton Anal Corp, Houston, TX (United States)

2004-03-01

This article presents a procedure to evaluate and characterize environmental samples containing mixtures of hydrocarbons over a wide boiling range of materials that include fuels and other products used in commerce. The range of the method extends to the higher boiling and heavier molecular weight hydrocarbon products in the range of motor oil, bunker fuel, and heavier residue materials. The procedure uses the analytical laboratory technique of high-temperature simulated distillation along with mathematical regression of the analytical data to estimate the relative contribution of individual products in mixtures of hydrocarbons present in environmental samples. An analytical technique to determine hydrocarbon-type distributions by gas chromatography-mass spectrometry with nitric oxide ionization spectrometry evaluation is also presented. This type of analysis allows complex hydrocarbon mixtures to be classified by their chemical composition, or types of hydrocarbons that include paraffins, cycloparaffins, monoaromatics, and polycyclic aromatic hydrocarbons. Characteristic hydrocarbon patterns for example, in the relative distribution of polycyclic aromatic hydrocarbons are valuable for determining the potential origin of materials present in environmental samples. These methods provide quantitative data for hydrocarbon components in mixtures as a function of boiling range and 'hydrocarbon fingerprints' of the types of materials present. This information is valuable in assessing environmental impacts of hydrocarbons at contaminated sites and establishing the liabilities and cost allocations for responsible parties.

Performance evaluation of Chrysopogon zizanoides under urban conditions of Kuwait.

Science.gov (United States)

Suleiman, Majda Khalil; Bhat, Narayana Ramachandra; Jacob, Sheena; Al-Burais, Meali

2018-02-01

Plant physiological and morphological attributes should be critically evaluated for selecting any species for landscaping projects. The selection of a species should be based on the evaluation of its adaptability, noninvasiveness, growth potential, and performance under the prevailing local arid conditions for their aesthetic looks, soil stabilization, and afforestation values. Chrysopogon zizanoides (Vetiver), is suitable for Kuwait because it can withstand fluctuating temperatures ranging from -14 to 55 °C with unique physical and physiological characteristics. Despite the successful growth performance of Vetiver in landscaping projects mostly in several tropical countries, it has not been utilized and evaluated in the Arabian Gulf region. The objective of the current study was to evaluate the performance of selected ten cultivars of Vetiver (ODV-1, 8, 9, 13, 17, 21, 23, Silent Valley, Urlikal, and Pannimedu) in the deficient soil and environmental conditions of Kuwait in urban landscape at minimal maintenance. It is suggested that based on visual greenery effect and overall growth performance cultivars, Pannimedu, Silent Valley, ODV-13, ODV-8 and ODV-9 can be considered for landscaping projects in Kuwait. To obtain the superior crown volume (which considers height and canopy) cultivar Pannimedu is suggested and to get a bushy growth (considering the number of tillers) cultivar ODV-13 and ODV-8 is found to be suitable.

Aging evaluation of active components by using performance evaluation

International Nuclear Information System (INIS)

Jung, S. K.; Jin, T. E.; Kim, J. S.; Jung, I. S.; Kim, T. R.

2003-01-01

Risk analysis and performance evaluation methodology were applied to the aging evaluation of active components in the periodic safety review of Wolsung unit 1. We conclude that evaluation of performance is more effective to discriminate the aging degradation of active component than the evaluation of aging mechanism. It is essential to analyze the common cause failures of low performance components to evaluate the properness of present maintenance system. Past 10 years failure history is used for establishing the performance criteria. Past 2 years failure history is used for the evaluating the recent performance condition. We analyze the failure mode of the components to improve the maintenance system. Performance evaluation methodology is useful for the quantitative evaluation of aging degradation of active components. Analysis on the repeated failures can be useful for the feedback to maintenance plan and interval

Assessing the Environmental Performance of Integrated Ethanol and Biogas Production

Energy Technology Data Exchange (ETDEWEB)

Martin, Michael; Svensson, Niclas; Fonseca, Jorge (Linkoeping Univ., Environmental Technology and Management, Linkoeping (Sweden)), e-mail: michael.martin@liu.se

2011-06-15

As the production of biofuels continues to expand worldwide, criticism about, e.g. the energy output versus input and the competition with food has been questioned. However, biofuels may be optimized to increase the environmental performance through the concepts of industrial symbiosis. This paper offers a quantification of the environmental performance of industrial symbiosis in the biofuel industry through integration of biogas and ethanol processes using a life cycle approach. Results show that although increasing integration is assumed to produce environmental benefits in industrial symbiosis, not all impact categories have achieved this and the results depend upon the allocation methods chosen

Evaluation of the 2013 Southeast Asian Haze on Solar Generation Performance.

Science.gov (United States)

Maghami, Mohammadreza; Hizam, Hashim; Gomes, Chandima; Hajighorbani, Shahrooz; Rezaei, Nima

2015-01-01

Pollution in Southeast Asia is a major public energy problem and the cause of energy losses. A significant problem with respect to this type of pollution is that it decreases energy yield. In this study, two types of photovoltaic (PV) solar arrays were used to evaluate the effect of air pollution. The performance of two types of solar arrays were analysed in this research, namely, two units of a 1 kWp tracking flat photovoltaic (TFP) and two units of a 1 kWp fixed flat photovoltaic arrays (FFP). Data analysis was conducted on 2,190 samples at 30 min intervals from 01st June 2013, when both arrays were washed, until 30th June 2013. The performance was evaluated by using environmental data (irradiation, temperature, dust thickness, and air pollution index), power output, and energy yield. Multiple regression models were predicted in view of the environmental data and PV array output. Results showed that the fixed flat system was more affected by air pollution than the tracking flat plate. The contribution of this work is that it considers two types of photovoltaic arrays under the Southeast Asian pollution 2013.

Evaluation of the 2013 Southeast Asian Haze on Solar Generation Performance

Science.gov (United States)

Maghami, Mohammadreza; Hizam, Hashim; Gomes, Chandima; Hajighorbani, Shahrooz; Rezaei, Nima

2015-01-01

Pollution in Southeast Asia is a major public energy problem and the cause of energy losses. A significant problem with respect to this type of pollution is that it decreases energy yield. In this study, two types of photovoltaic (PV) solar arrays were used to evaluate the effect of air pollution. The performance of two types of solar arrays were analysed in this research, namely, two units of a 1 kWp tracking flat photovoltaic (TFP) and two units of a 1 kWp fixed flat photovoltaic arrays (FFP). Data analysis was conducted on 2,190 samples at 30 min intervals from 01st June 2013, when both arrays were washed, until 30th June 2013. The performance was evaluated by using environmental data (irradiation, temperature, dust thickness, and air pollution index), power output, and energy yield. Multiple regression models were predicted in view of the environmental data and PV array output. Results showed that the fixed flat system was more affected by air pollution than the tracking flat plate. The contribution of this work is that it considers two types of photovoltaic arrays under the Southeast Asian pollution 2013. PMID:26275303

Environmental Uncertainty, Performance Measure Variety and Perceived Performance in Icelandic Companies

DEFF Research Database (Denmark)

Rikhardsson, Pall; Sigurjonsson, Throstur Olaf; Arnardottir, Audur Arna

and the perceived performance of the company. The sample was the 300 largest companies in Iceland and the response rate was 27%. Compared to other studies the majority of the respondents use a surprisingly high number of different measures – both financial and non-financial. This made testing of the three......The use of performance measures and performance measurement frameworks has increased significantly in recent years. The type and variety of performance measures in use has been researched in various countries and linked to different variables such as the external environment, performance...... measurement frameworks, and management characteristics. This paper reports the results of a study carried out at year end 2013 of the use of performance measures by Icelandic companies and the links to perceived environmental uncertainty, management satisfaction with the performance measurement system...

Basic considerations for the preparation of performance testing materials as related to performance evaluation acceptance criteria

International Nuclear Information System (INIS)

McCurdy, D.E.; Morton, J.S.

2001-01-01

The preparation of performance testing (PT) materials for environmental and radiobioassay applications involves the use of natural matrix materials containing the analyte of interest, the addition (spiking) of the analyte to a desired matrix (followed by blending for certain matrices) or a combination of the two. The distribution of the sample analyte concentration in a batch of PT samples will reflect the degree of heterogeneity of the analyte in the PT material and/or the reproducibility of the sample preparation process. Commercial and government implemented radioanalytical performance evaluation programs have a variety of acceptable performance criteria. The performance criteria should take into consideration many parameters related to the preparation of the PT materials including the within and between sample analyte heterogeneity, the accuracy of the quantification of an analyte in the PT material and to what 'known' value will a laboratory's result be compared. How sample preparation parameters affect the successful participation in performance evaluation (PE) programs having an acceptance criteria established as a percent difference from a 'known' value or in PE programs using other acceptance criteria, such as the guidance provided in ANSI N42.22 and N13.30 is discussed. (author)

Intercomparison of measuring and evaluation methods for environmental radiations

International Nuclear Information System (INIS)

Saito, Kimiaki; Nagaoka, Toshi; Sakamoto, Ryuichi; Tsutsumi, Masahiro; Moriuchi, Shigeru; Okano, Masaharu.

1990-11-01

This report presents the results of the cooperative research by IPCR and JAERI. In order to investigate the accuracy and characteristics of the measurement and evaluation methods for environmental radiations, developed independently by IPCR and by JAERI, field experiments were performed using the both methods under the same conditions at the same time. The experiments were performed at fixed points on the ground, in a moving car and in a flying helicopter. Discussion was made on the basis of the comparison of the results from the both methods. The exposure rates from the IPCR method agreed within 10% with those from the JAERI method, however the former were systematically higher than the latter. Since the evaluated exposure rate components due to 238 U-series, 232 Th-series and 40 K showed apparent differences between the IPCR method and the JAERI method, further investigation is necessary for the positions and widths of the applied energy bands and the coefficients in the equations to evaluate the components. In measurements in a moving vehicle, the sequential data should be gathered per sufficiently short distance to distinguish the local change of the radiation level when it changes greatly according to the location. The aerial data showed that the exposure rates from terrestrial gamma rays in the region west of the Abe river are apparently higher than those in the Kanto district. (author)

Environmental education evaluation: time to reflect, time for change.

Science.gov (United States)

Crohn, Kara; Birnbaum, Matthew

2010-05-01

Evaluation in environmental education is fairly nascent despite decades-long attention to its importance. In setting the context for future chapters appearing in this special issue of the Journal of Evaluation and Program Planning, attention is devoted to the political circumstances associated with retrenchment in the public sector and increased involvement of citizens in environmental issues in their regions. It further is nested in the context of potential political reforms in a stable market democracy where education is but one strategy that can be bundled with regulations and taxes/subsidies. Additional attention is directed to explaining many of the key evaluation theories--utilization-focused evaluation, evaluative capacity building, and program-theory driven evaluation. The final section of this chapter situates the subsequent chapters of this volume based on the demographic target (youth or adult) as well as connection to a particular evaluation theory. Copyright 2009 Elsevier Ltd. All rights reserved.

Performance assessment of hybrid power generation systems: Economic and environmental impacts

International Nuclear Information System (INIS)

Al-Sharafi, Abdullah; Yilbas, Bekir S.; Sahin, Ahmet Z.; Ayar, T.

2017-01-01

Highlights: • A double-step optimization tool for hybrid power generation systems is introduced. • Economical aspects and the impact of the system on the environment are considered. • A hybrid system comprises PV array-wind turbine-battery-diesel engine is considered. • Real time analysis of the system for full year simulation is carried out. • System optimum configuration at point where total performance index is maximized. - Abstract: This article aims to introduce a double-step performance assessment tool for the hybrid power generation systems. As a case study, a hybrid system comprising PV array, wind-turbine, battery bank and diesel engine is incorporated in hourly based simulations to meet power demand of a residence unit at Dhahran area, Kingdom of Saudi Arabia. Different indicators related to economical and environmental performance assessments of the hybrid system have been considered. In the economic related assessment case, cost of electricity, energy excess percentage, and operating life cycle indicators have been considered and combined to develop the first overall performance index. Renewable contribution, renewable source availability and environmental impact indicators have been considered for the environmental assessment case and they are combined in the second performance index. For either economical or environmental cases, the optimum configuration of the system is achieved by maximizing the first and second overall performance indicators. This innovative optimization tools gives the designer the freedom to assign suitable weights associated with economical aspect, environmental impact, governmental regulations and social impact, for the first and second overall performance indicators, and combine them in the total performance index. The optimum system configuration is at the point where the total performance index is maximized.

Evaluation of Haddam Neck (Connecticut Yankee) Nuclear Power Plant, environmental impact prediction, based on monitoring programs

International Nuclear Information System (INIS)

Gore, K.L.; Thomas, J.M.; Kannberg, L.D.; Mahaffey, J.A.; Waton, D.G.

1976-12-01

A study was undertaken by the U.S. Nuclear Regulatory Commission (NRC) to evaluate the nonradiological environmental data obtained from three nuclear power plants operating for a period of one year or longer. The document presented reports the second of three nuclear power plants to be evaluated in detail by Battelle, Pacific Northwest Laboratories. Haddam Neck (Connecticut Yankee) Nuclear Power Plant nonradiological monitoring data were assessed to determine their effectiveness in the measurement of environmental impacts. Efforts were made to determine if: (1) monitoring programs, as designed, can detect environmental impacts, (2) appropriate statistical analyses were performed and if they were sensitive enough to detect impacts, (3) predicted impacts could be verified by monitoring programs, and (4) monitoring programs satisfied the requirements of the Environmental Technical Specifications. Both preoperational and operational monitoring data were examined to test the usefulness of baseline information in evaluating impacts. This included an examination of the methods used to measure ecological, chemical, and physical parameters, and an assessment of sampling periodicity and sensitivity where appropriate data sets were available. From this type of analysis, deficiencies in both preoperational and operational monitoring programs may be identified and provide a basis for suggested improvement

Environmental evaluation for sustainable development of coal mining in Qijiang, Western China

Energy Technology Data Exchange (ETDEWEB)

Si, Hu; Bi, Haipu [College of Resource and Environment Science, Chongqing University, Chongqing 400030 (China); Key Lab for the Exploitation of Southwestern Resource and the Environment Disaster Control Engineering, the Ministry of Education, Chongqing University, Chongqing 400030 (China); Li, Xiaohong; Yang, Chunhe [Key Lab for the Exploitation of Southwestern Resource and the Environment Disaster Control Engineering, the Ministry of Education, Chongqing University, Chongqing 400030 (China)

2010-03-01

Environmental degradation associated with mining activities may seriously threaten the health of local people and the sustainable development of coal mining, which may need to be addressed by improved environmental evaluation system. Based on analyzing environmental pollution from coal mining and the increasing need for raw coal, this paper establishes an environmental evaluation system, covering environmental situation, resource protection and economic benefit, for sustainable development in coal mining. This paper proposes methods for calculating the weight of each index and the environmental sustainable capability taking into account the method of Analytic Hierarchy Process (AHP). Finally, the index system is used to evaluate the environmental sustainability of coal mining in the Qijiang area, Western China, which has demonstrated the validity of the index system. It may also be useful as a tool to assess the environmental impact of mining areas, as well as a measure to promote sustainable development in coal mining. (author)

The effect of environmental performance and accounting characteristics to earnings informativeness

Science.gov (United States)

Herawaty, V.

2018-01-01

The objective of this empirical study is to analyze the influence of environmental performance and company’s accounting characteristics to earnings informativeness proxied by earnings response coefficient (ERC) on manufacturing companies listed on Indonesia Stock Exchange and consistently follow the PROPER assessment in 2010-2014. One of the company’s considerations is to create the green environment reflecting its environmental measures, drawing investors to respond to the company’s environmental performance. The data were obtained from Indonesian Capital Market Directory (ICMD), the Indonesia Stock Exchange homepage, the company’s annual reports, the decree of the Minister of Environment. The samples used in this research are 27 go public manufacturing companies listed on Indonesia Stock Exchange that consistently follow the PROPER in 2010-2014. The sampling technique used was the purposive method. This research uses multiple regression analysis. The results show that the environmental performance and profitability have a positive influence to earnings informativeness, while leverage has a negative influence to earnings informativeness. Growth opportunities as a control variable has a positive effect on earnings informativeness. This research has proved that the environmental performance is crucial through observing the investors’ reaction in the capital market.

The Influence of Environmental and Social Performance on Financial Performance: Evidence from Romania’s Listed Entities

Directory of Open Access Journals (Sweden)

Elena Dobre

2015-03-01

Full Text Available Companies that are listed on a stock exchange should know that reporting only financial measures is not enough for ensuring sustainable development. To be truly competitive, they should also include information about environmental policies and about the benefits that the company offers to its employees. The present research aims to provide information on how Romanian listed companies report environmental and social indicators and whether or not this has an impact on financial performance. We used a four time period panel fixed effect model for Romanian companies that are listed in the first category of the Bucharest Stock of Exchange. The results point out that increasing water, air and soil protection has a negative impact on current return on equity, while no effects were detected on return on assets and stock market returns. Other environmental variables such as gas, energy or sound were found not to be statistically significant. Training and benefits after retirement have a mixed effect on financial measures. The research correlates Romanian accounting regulation changes with companies’ characteristics and the influence of financial audit on financial performance, and concludes that increasing environmental and social protection could have an impact on financial performance in the long run, as positive correlation was detected between social or environmental performance and stock market returns one year after the changes occurred.

OECD Evaluation Report On Environmental Assessment Of Korea

International Nuclear Information System (INIS)

1995-11-01

This book reports enforcement of environmental policy and policy product and direction of improvement, management of water resource, air, waste substance and preservation of nature, integration of environment and economic policy, integration considering environment in economic policy and international cooperation. It tells US detailed inspection of the report, which includes pollution control and preservation of nature, economical development and environment, environmental performance, traffic and environment, and international environmental cooperation, on global environment.

Analysis of changes in environmental radiation, and three types of environmental radiation detector performance comparisons

International Nuclear Information System (INIS)

Park, J.H; Seo, J.H; Park, S.M; Yu, B.N; Park, J.H; Joo, K.S

2013-06-01

High-pressure ion chamber (GE Reuter-Stokes, HPIC), accuracy is high but the high price and do not have the ability nuclide analysis is a disadvantage. NaI(Tl) and PMT scintillation detector of radioactive materials can be divided. Environmental radiation measurements using a semiconductor with SiPM detector PMT to replace the value of the results were compared. SiPM detector using radiation environment were measured in the field to verify the accuracy and energy resolution. SiPMs performance as environmental radiation measurement equipment and radioactive material distinction as a personal dosimeter based technology, using the above results were prepared. The interest on the environmental radiation due to the Fukushima power plant crisis in Japan has been growing concern about the radiation environment of the relatively close proximity Korea is a very heightened state. Could be confirmed in the radiation environment of nuclear power plants around the analysis and performance of the next generation of environmental radiation meter. Fukushima power plants accident after 2 years, the equipment installed by this analysis meets the performance as a radiation detector could be confirmed as follows. CANA Inc. developed by radionuclides classification of using man-made and natural radionuclides and man-made radionuclides separated, ensure the value of the results were analyzed. Could be and alternative to the conventional detector energy resolution ( 137 CS<15%) and linearity (<15%) to satisfy the performance requirements of the measurement result of environmental radiation detector is considered. SiPM radiation environment changes and HPIC and NaI(TI) scintillation detector installed in Korea of the Fukushima power plant after the accident, radiation environment using a small alternative was to verify the accuracy of the measuring equipment. A big difference in performance as invisible by comparison with the large detector Assay miniaturization rough as a personal

Estimates of genetic parameters and environmental effects for measures of hunting performance in Finnish hounds.

Science.gov (United States)

Liinamo, A E; Karjalainen, L; Ojala, M; Vilva, V

1997-03-01

Data from field trials of Finnish Hounds between 1988 and 1992 in Finland were used to estimate genetic parameters and environmental effects for measures of hunting performance using REML procedures and an animal model. The original data set included 28,791 field trial records from 5,666 dogs. Males and females had equal hunting performance, whereas experience acquired by age improved trial results compared with results for young dogs (P Hounds with respect to their hunting ability should be based on animal model BLUP methods instead of mere performance testing. The evaluation system of field trials should also be revised for more reliability.

Carbon footprint as environmental performance indicator for the manufacturing industry

DEFF Research Database (Denmark)

Laurent, Alexis; Olsen, Stig Irving; Hauschild, Michael Zwicky

2010-01-01

With the current focus on our climate change impacts, the embodied CO2 emission or "Carbon footprint" is often used as an environmental performance indicator for our products or production activities. The ability of carbon footprint to represent other types of impact like human toxicity, and hence...... the overall environmental impact is investigated based on life cycle assessments of several materials of major relevance to manufacturing industries. The dependence of the carbon footprint on the assumed scenarios for generation of thermal and electrical energy in the life cycle of the materials is analyzed......, and the appropriateness of carbon footprint as an overall indicator of the environmental performance is discussed....

Economic evaluation of environmental impacts of open cast mining project - an approach

International Nuclear Information System (INIS)

Maiti, S.K.; Pathak, K.

1998-01-01

Economic valuation of environmental attributes are pragmatic approach to evaluating the impacts and it helps decision makers to arrive at objective decisions on the basis of cost benefit ratio. For determining the physical impact and its quantification, four evaluation methods, namely-market price method, surrogate market price, survey based and cost based approaches are generally used. The present paper reviews the importance of environmental evaluation of impacts of mining and also reviews a few suitable methodologies that could be effectively used for economic evaluation of environmental impacts in open cast mining projects. (author)

Performance-Based Acquisition: A tool to reduce costs and improve performance at US Army environmental remediation sites

International Nuclear Information System (INIS)

Kosko, Nancy; Gilman, Janet; White, Debbie

2007-01-01

The US Army, like most US federal and state environmental organizations, is faced with limited resources to conduct environmental work, an increasing workload, and challenges in achieving closeout of its environmental cleanup programs. In 2001, in an effort to incorporate proven private sector tools into federal cleanup programs, the Department of Defense (DoD) Business Initiative Council (BIC), initiated the use of Performance-Based Acquisition (PBA) for environmental cleanup. Since fiscal year 2000, the US Army Environmental Command (USAEC) has successfully awarded more than 55 performance-based contracts for environmental remediation. These contracts range in size from $500,000 to $52.4 million, and include closing properties (Base Realignment and Closure (BRAC)) and some of the US Army's most complex active installations. The contracts address a range of activities including investigation through monitoring and site completion, as well as various technical challenges including dense non-aqueous phase liquids (DNAPL) in ground water, karst systems, munitions and explosives of concern, and biological agents. The contracts are most often firm-fixed price, and 50 percent of the contracts required contractors to purchase environmental insurance in the form of remediation stop loss insurance (also known as cleanup cost cap insurance). The USAEC has conducted continuous process improvement since inception of the initiative. This paper presents results of two studies that were conducted in 2005-2006 to determine what lessons learned can be applied to future activities and to measure performance of contractors currently executing work under the performance based contracts. (authors)

Performance of newly implemented Environmental Management Systems in primary schools in South Africa.

Science.gov (United States)

Hens, Luc; Wiedemann, Torsten; Raath, Schalk; Stone, Riana; Renders, Paul; Craenhals, Eric

2010-01-01

Quantitative results from Environmental Management Systems (EMS) at primary schools have rarely been examined in literature. This paper presents the monitoring results of environmental care in 39 primary schools in Northern South Africa. During 2 years, after the EMS was implemented in the curriculum and in the school's management, the progress of environmental performances of the participating schools has been measured, by means of detailed questionnaires, related to four environmental aspects: water, waste, energy and greening. At the beginning of the project, 50% of the schools performed well on water-related environmental actions. Two years later it was 76%. For waste-related activities the improvement was even stronger: from 50% to 100%. The environmental performances of the schools improved also for greening-related actions, from 50% at the start of the project to 64% two years later. Only energy-related activities did not improve significantly with only 24% of all schools performing well at the end of the survey period. In general, the introduction of an EMS succeeded in an improvement of the overall environmental performances of the schools, but cost-intensive activities were less successful than others. Copyright 2009 Elsevier Ltd. All rights reserved.

Environmental Management Assessment of the Fernald Environmental Management Project (FEMP)

Energy Technology Data Exchange (ETDEWEB)

1993-04-01

This report documents the results of the Environmental Management Assessment performed at the Fernald Environmental Management Project (FEMP) in Fernald, Ohio. During this assessment, the activities conducted by the assessment team included review of internal documents and reports from previous audits and assessments; interviews with US Department of Energy (DOE) and FEMP contractor personnel; and inspection and observation of selected facilities and operations. The onsite portion of the assessment was conducted from March 15 through April 1, 1993, by DOE`s Office of Environmental Audit (EH-24) located within the Office of the Assistant Secretary for Environment, Safety, and Health (EH-1). EH-24 carries out independent assessments of DOE facilities and activities as part of the EH-1 Environment, Safety, and Health (ES&H) Oversight Audit Program. The EH-24 program is designed to evaluate the status of DOE facilities and activities with respect to compliance with Federal, state, and local environmental laws and regulations; compliance with DOE Orders, Guidance and Directives; conformance with accepted industry practices and standards of performance; and the status and adequacy of management systems developed to address environmental requirements. The Environmental Management Assessment of FEMP focused on the adequacy of environmental management systems. Further, in response to requests by the Office of Environmental Restoration and Waste Management (EM) and Fernald Field Office (FN), Quality Assurance and Environmental Radiation activities at FEMP were evaluated from a programmatic standpoint. The results of the evaluation of these areas are contained in the Environmental Protection Programs section in this report.

Environmental Management Assessment of the Fernald Environmental Management Project (FEMP)

International Nuclear Information System (INIS)

1993-04-01

This report documents the results of the Environmental Management Assessment performed at the Fernald Environmental Management Project (FEMP) in Fernald, Ohio. During this assessment, the activities conducted by the assessment team included review of internal documents and reports from previous audits and assessments; interviews with US Department of Energy (DOE) and FEMP contractor personnel; and inspection and observation of selected facilities and operations. The onsite portion of the assessment was conducted from March 15 through April 1, 1993, by DOE's Office of Environmental Audit (EH-24) located within the Office of the Assistant Secretary for Environment, Safety, and Health (EH-1). EH-24 carries out independent assessments of DOE facilities and activities as part of the EH-1 Environment, Safety, and Health (ES ampersand H) Oversight Audit Program. The EH-24 program is designed to evaluate the status of DOE facilities and activities with respect to compliance with Federal, state, and local environmental laws and regulations; compliance with DOE Orders, Guidance and Directives; conformance with accepted industry practices and standards of performance; and the status and adequacy of management systems developed to address environmental requirements. The Environmental Management Assessment of FEMP focused on the adequacy of environmental management systems. Further, in response to requests by the Office of Environmental Restoration and Waste Management (EM) and Fernald Field Office (FN), Quality Assurance and Environmental Radiation activities at FEMP were evaluated from a programmatic standpoint. The results of the evaluation of these areas are contained in the Environmental Protection Programs section in this report

A whole-cell bioreporter assay for quantitative genotoxicity evaluation of environmental samples.

Science.gov (United States)

Jiang, Bo; Li, Guanghe; Xing, Yi; Zhang, Dayi; Jia, Jianli; Cui, Zhisong; Luan, Xiao; Tang, Hui

2017-10-01

Whole-cell bioreporters have emerged as promising tools for genotoxicity evaluation, due to their rapidity, cost-effectiveness, sensitivity and selectivity. In this study, a method for detecting genotoxicity in environmental samples was developed using the bioluminescent whole-cell bioreporter Escherichia coli recA::luxCDABE. To further test its performance in a real world scenario, the E. coli bioreporter was applied in two cases: i) soil samples collected from chromium(VI) contaminated sites; ii) crude oil contaminated seawater collected after the Jiaozhou Bay oil spill which occurred in 2013. The chromium(VI) contaminated soils were pretreated by water extraction, and directly exposed to the bioreporter in two phases: aqueous soil extraction (water phase) and soil supernatant (solid phase). The results indicated that both extractable and soil particle fixed chromium(VI) were bioavailable to the bioreporter, and the solid-phase contact bioreporter assay provided a more precise evaluation of soil genotoxicity. For crude oil contaminated seawater, the response of the bioreporter clearly illustrated the spatial and time change in genotoxicity surrounding the spill site, suggesting that the crude oil degradation process decreased the genotoxic risk to ecosystem. In addition, the performance of the bioreporter was simulated by a modified cross-regulation gene expression model, which quantitatively described the DNA damage response of the E. coli bioreporter. Accordingly, the bioluminescent response of the bioreporter was calculated as the mitomycin C equivalent, enabling quantitative comparison of genotoxicities between different environmental samples. This bioreporter assay provides a rapid and sensitive screening tool for direct genotoxicity assessment of environmental samples. Copyright © 2017. Published by Elsevier Ltd.

The impact of supply management on environmental performance outcomes

Science.gov (United States)

Tate, Wendy L.; Ellram, Lisa M.; Carter, Craig R.

2004-12-01

Environmentally responsible manufacturing is concerned with minimizing the environmental impact of products from development to end-of-life disposal or remanufacture. Environmental pressures from customers, regulation, legislation and competition have made organizations more aware of the impact that products have on the natural environment. This study focuses on environmental concerns during the early stages of product design. We examine these concerns with a specific focus on the involvement of supply management personnel, inter-organizational supplier relationships and a determination of how environmental issues affect supplier selection and supply base management. The literature on environmental supplier and purchasing involvement in product development and environmental supplier selection criteria and codes of conduct is reviewed. Following this, secondary data from the websites of environmentally proactive organizations will be gathered to examine what type of tracking is used for suppliers. Finally, discussions with proactive organizations will be presented during the conference that explore the role of supply management personnel in capturing, measuring, quantifying and reporting on the environmental costs and benefits associated with its suppliers. This research provides insights into how the involvement of supply management can improve the environmental performance outcomes of an organization.

Performance Evaluation of the United Nations Environment ...

Science.gov (United States)

A request for technical collaboration between the UNEP and the US EPA resulted in the establishment of a MCRADA. The purpose of this agreement was to evaluate an air quality monitoring system (referred to as the UNEP pod) developed by the UNEP for use in environmental situations where more sophisticated monitoring instrumentation was not available. The US EPA has conducted numerous evaluations of other similar sensor pods at its Research Triangle Park, NC research campus and has trained staff as well as established research designs for such efforts. Under the terms of the MCRADA, the US EPA would operate the pod using UNEP provided operating procedures in a manner consistent with its planned intent of deployment. The US EPA would collect air quality monitoring data from the pod involving select environmental measures over a period of approximately one month. Reference monitoring data collected from collocated federal regulatory monitors would be used to establish a comparison between the two systems and thus establishment of performance characteristics. In addition, the US EPA would provide feedback information to the UNEP as to observed ease of use features of the pod that would be beneficial in its future evolution and deployment. The UNEP recently developed a multipollutant sensor pod called the UNEP Air Quality Monitoring Unit, herein simply defined as the UNEP pod (http://aqicn.org/faq/2015-10-28/unep-air-quality-monitoring-station/). First introduced in 20

Advanced transport systems analysis, modeling, and evaluation of performances

CERN Document Server

Janić, Milan

2014-01-01

This book provides a systematic analysis, modeling and evaluation of the performance of advanced transport systems. It offers an innovative approach by presenting a multidimensional examination of the performance of advanced transport systems and transport modes, useful for both theoretical and practical purposes. Advanced transport systems for the twenty-first century are characterized by the superiority of one or several of their infrastructural, technical/technological, operational, economic, environmental, social, and policy performances as compared to their conventional counterparts. The advanced transport systems considered include: Bus Rapid Transit (BRT) and Personal Rapid Transit (PRT) systems in urban area(s), electric and fuel cell passenger cars, high speed tilting trains, High Speed Rail (HSR), Trans Rapid Maglev (TRM), Evacuated Tube Transport system (ETT), advanced commercial subsonic and Supersonic Transport Aircraft (STA), conventionally- and Liquid Hydrogen (LH2)-fuelled commercial air trans...

Comparative environmental evaluation of construction waste management through different waste sorting systems in Hong Kong.

Science.gov (United States)

Hossain, Md Uzzal; Wu, Zezhou; Poon, Chi Sun

2017-11-01

This study aimed to compare the environmental performance of building construction waste management (CWM) systems in Hong Kong. Life cycle assessment (LCA) approach was applied to evaluate the performance of CWM systems holistically based on primary data collected from two real building construction sites and secondary data obtained from the literature. Different waste recovery rates were applied based on compositions and material flow to assess the influence on the environmental performance of CWM systems. The system boundary includes all stages of the life cycle of building construction waste (including transportation, sorting, public fill or landfill disposal, recovery and reuse, and transformation and valorization into secondary products). A substitutional LCA approach was applied for capturing the environmental gains due to the utilizations of recovered materials. The results showed that the CWM system by using off-site sorting and direct landfilling resulted in significant environmental impacts. However, a considerable net environmental benefit was observed through an on-site sorting system. For example, about 18-30kg CO 2 eq. greenhouse gases (GHGs) emission were induced for managing 1 t of construction waste through off-site sorting and direct landfilling, whereas significant GHGs emission could be potentially avoided (considered as a credit -126 to -182kg CO 2 eq.) for an on-site sorting system due to the higher recycling potential. Although the environmental benefits mainly depend on the waste compositions and their sortability, the analysis conducted in this study can serve as guidelines to design an effective and resource-efficient building CWM system. Copyright © 2017 Elsevier Ltd. All rights reserved.

48 CFR 436.604 - Performance evaluation.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Performance evaluation... Performance evaluation. Preparation of performance evaluation reports. (a) In addition to the requirements of FAR 36.604, performance evaluation reports shall be prepared for indefinite-delivery type contracts...

Evaluation of the strain rate effects on environmental fatigue life of CF8M cast stainless steel

International Nuclear Information System (INIS)

Jeong, Ill Seok; Ha, Gak Hyun; Jeon, Hyun Ik

2009-01-01

The environmental fatigue life of CF8M cast stainless steel is influenced by mechanical, environmental and metallurgical parameters, such as strain rate, strain amplitude, temperature, dissolved oxygen concentration, water flow rate and so on. In an actual plant, the mechanical and environmental parameters are changing during the plant operation. Therefore, the effect of such mechanical and environmental parameter changes on fatigue life evaluation have to be studied. Low cycle fatigue life of structural materials diminishes remarkably as functions of various parameters in high temperature and high pressure environments. Such reduction can be estimated by the fatigue life reduction factor(F en ). In this study, fatigue tests were performed under changing conditions of strain amplitude, strain rate. Fatigue life was measured in terms of the number of cycles with the variation of strain amplitudes at 0.004 %/s strain rate, and the fatigue life correction factor was evaluated according to the equation modified by U. S. Nuclear Regulatory Commission(U.S.NRC) and Japanese Environmental Fatigue Tests committee (JEFT).

Evaluation of Environmental Quality Productive Ecosystem Guayas (Ecuador).

Science.gov (United States)

Pozo, Wilson; Pardo, Francisco; Sanfeliu, Teófilo; Carrera, Gloria; Jordan, Manuel; Bech, Jaume; Roca, Núria

2015-04-01

Natural resources are deteriorating very rapidly in the Gulf of Guayaquil and the area of influence in the Guayas Basin due to human activity. Specific problems are generated by the mismanagement of the aquaculture industry affecting the traditional agricultural sectors: rice, banana, sugarcane, cocoa, coffee, and soya also studied, and by human and industrial settlements. The development of industrial activities such as aquaculture (shrimp building for shrimp farming in ponds) and agriculture, have increasingly contributed to the generation of waste, degrading and potentially toxic elements in high concentrations, which can have adverse effects on organisms in the ecosystems, in the health of the population and damage the ecological and environmental balance. The productive Guayas ecosystem, consists of three interrelated ecosystems, the Gulf of Guayaquil, the Guayas River estuary and the Guayas Basin buffer. The objective of this study was to evaluate the environmental quality of the productive Guayas ecosystem (Ecuador), through operational and specific objectives: 1) Draw up the transition coastal zone in the Gulf of Guayaquil, 2) Set temporal spatial variability of soil salinity in wetlands rice, Lower Guayas Basin, 3) evaluate the heavy metals in wetland rice in the Lower Basin of Guayas. The physical and chemical parameters of the soils have been studied. These are indicators of environmental quality. The multivariate statistical method showed the relations of similarities and dissimilarities between variables and parameter studies as stable. Moreover, the boundaries of coastal transition areas, temporal spatial variability of soil salinity and heavy metals in rice cultivation in the Lower Basin of Guayas were researched. The sequential studies included and discussed represent a broad framework of fundamental issues that has been valued as a basic component of the productive Guayas ecosystem. They are determinants of the environmental quality of the Guayas

Performance Evaluation and Improvement of a Newly-Renovated Danish School Building (Retro-commissioning)

DEFF Research Database (Denmark)

Liu, Li; Georgieva, Viktoriya Vasileva; Zabusova, Diana

2017-01-01

In this study, we analyse and evaluate the energy performance of a Danish school building 4 years after its renovation. The structure of the following paper follows four phases, which include Planning, Investigation, Implementation and Hand-off. In the Planning phase, the objectives of the retro...... commissioning are set based on the Owner’s Project Requirements. The Investigation phase aims to analyze how the building and its systems are performing in terms of energy use and indoor environmental quality. The Implementation phase includes dynamic building simulations, which target to analyze different...... solutions and their impact on the energy consumption and indoor environmental quality in the building. Description of the final solution for optimization is included in the conclusion (Hand-off phase) of this paper....

Performance evaluation of a vibration desensitized scanning white light interferometer

International Nuclear Information System (INIS)

Troutman, J; Evans, C J; Ganguly, V; Schmitz, T L

2014-01-01

Surface metrology instruments normally require thermal, seismic and acoustic isolation. Shop-floor metrology solutions offer reduced cost and process time. If they operate on the same principles as laboratory devices, an inherent sensitivity to vibration remains. This paper describes a methodology for evaluating ‘environmental tolerance’ and applying it to characterize a recently introduced ‘environmentally tolerant’ scanning white light interferometer (SWLI). Previously published measurements of replicated nickel reference standards on the new instrument and on a stylus profilometer showed good correlation. Surface topography repeatabilities (per ISO 25178-604:2013) were insignificantly different when evaluated on the SWLI instrument in a metrology laboratory and in a manufacturing area. Measurements of reference standards under forced vibration of the entire instrument show maximum ripple error and data dropout in regions of structural resonance. Measurements were performed with large forced horizontal and vertical sample oscillation beneath the objective, exhibiting maximum ripple error near odd integer multiples of half the instrument detector frequency. Error due to data dropout was also investigated. (paper)

Balancing environmental and economic performance in the food-processing industry

DEFF Research Database (Denmark)

Akkerman, Renzo; van Donk, Dirk Pieter

2010-01-01

Changing customer requirements, unpredictable disturbances combined with expensive production facilities, are major problems for food processing companies to achieve synergy between the economic and environmental performance. There notably is a lack of tools to support decisions to explore effect...... in exploring the effect of uncertainty in demand and production. As a result, process design can be more robust: both economic and environmental. This position paper explores the problem and the main elements of the proposed scenario-based simulation approach.......Changing customer requirements, unpredictable disturbances combined with expensive production facilities, are major problems for food processing companies to achieve synergy between the economic and environmental performance. There notably is a lack of tools to support decisions to explore effects...

Effect of odour on multisensory environmental evaluations of road traffic

Energy Technology Data Exchange (ETDEWEB)

Jiang, Like, E-mail: jianglike@yahoo.com; Masullo, Massimiliano, E-mail: Massimiliano.MASULLO@unina2.it; Maffei, Luigi, E-mail: luigi.maffei@unina2.it

2016-09-15

This study investigated the effect of odour on multisensory environmental evaluations of road traffic. The study aimed to answer: (1) Does odour have any effect on evaluations on noise, landscape and the overall environment? (2) How different are participants' responses to odour stimuli and are these differences influential on the evaluations? Experimental scenarios varied in three Traffic levels, three Tree screening conditions and two Odour presence conditions were designed, and presented to participants in virtual reality. Perceived Loudness, Noise Annoyance, Landscape Quality and Overall Pleasantness of each scenario were evaluated and the results were analysed. It shows that Odour presence did not have significant main effect on any of the evaluations, but has significant interactions with Traffic level on Noise Annoyance and with Tree screening on Landscape Quality, indicating the potential of odour to modulate noise and visual landscape perceptions in specific environmental content. Concerning participants' responses to odour stimuli, large differences were found in this study. However, the differences did not seem to be influential on environmental evaluations in this study. Larger samples of participants may benefit this study for more significant results of odour effect.

Effect of odour on multisensory environmental evaluations of road traffic

International Nuclear Information System (INIS)

Jiang, Like; Masullo, Massimiliano; Maffei, Luigi

2016-01-01

This study investigated the effect of odour on multisensory environmental evaluations of road traffic. The study aimed to answer: (1) Does odour have any effect on evaluations on noise, landscape and the overall environment? (2) How different are participants' responses to odour stimuli and are these differences influential on the evaluations? Experimental scenarios varied in three Traffic levels, three Tree screening conditions and two Odour presence conditions were designed, and presented to participants in virtual reality. Perceived Loudness, Noise Annoyance, Landscape Quality and Overall Pleasantness of each scenario were evaluated and the results were analysed. It shows that Odour presence did not have significant main effect on any of the evaluations, but has significant interactions with Traffic level on Noise Annoyance and with Tree screening on Landscape Quality, indicating the potential of odour to modulate noise and visual landscape perceptions in specific environmental content. Concerning participants' responses to odour stimuli, large differences were found in this study. However, the differences did not seem to be influential on environmental evaluations in this study. Larger samples of participants may benefit this study for more significant results of odour effect.

Economic, Energetic, and Environmental Impact Evaluation of the Water Discharge Networks from Mining Works

Directory of Open Access Journals (Sweden)

Andrei Cristian Rada

2018-01-01

Full Text Available Sustainable development represents an optimistic scenario for the evolution of contemporary civilization. The object of this paper is to define certain evaluation criteria regarding the performances of water discharge networks from mining works, and propose a method for aggregating the specific indicators for monetary costs, energetic costs, and environmental impact-related costs. The global pollution index (GPI represents a method for assessing environment health status or pollution levels. The GPI quantitatively expresses this status based on its index, which results from a ratio between the ideal value and the given value of certain quality indices that are considered specific for the analyzed environmental factors at certain moments. The proposed method in this paper tries to perform a synergistic aggregation of the balance sheet of harmfulness and classic balance sheets for matter and energy for an industrial process.

Environmental performance, profitability, asset utilization, debt monitoring and firm value

Science.gov (United States)

Bukit, R. Br; Haryanto, B.; Ginting, P.

2018-02-01

The growing issue on firm value shows that firm value is not only determined by the firm ability to increase financial profit, but also by the company's concern in maintaining the environmental condition. The industrial development produces waste that pollutes the environment that has potential to serious impact on the next life. In addition to provide financial benefits, companies are increasingly facing pressure to be socially responsible for the survival of the company. However, past findings demonstrate that the effect of environmental performance, profitability, and asset utilization to the firm’s value are still unclear. This study aims to test whether environmental performance, firm profitability and asset utilization can effectively enhance firm value in two different conditions: intensive debt monitoring and less intensive debt monitoring. Sample of companies is taken from the list of Indonesia Stock Exchange during the period of 2013 to 2015. Using multiple regression analysis, discloses that: in intensive monitoring, managers tend to have high firm value when company has high environmental performance and or high profitability and high asset utilization. Monitoring system needs to be intensified especially for companies with the above characteristics.

Evaluation of Ecological Environmental Quality in a Coal Mining Area by Modelling Approach

Directory of Open Access Journals (Sweden)

Chaodong Yan

2017-07-01

Full Text Available The purpose of this study was to explore the effective method of the comprehensive evaluation of ecological environmental quality in a coal mining area. Firstly, we analyzed the ecological environmental effect of the coal mining area according to Pigovian Tax theory and, according to the results of the analysis and the demand for the selection of evaluation indices by the comprehensive evaluation, built the corresponding comprehensive evaluation index system. We then used the correlation function method to determine the relative weights of each index. We determined the basic standards of a comprehensive evaluation of ecological environmental quality in a coal mining area according to the actual situation of ecological environmental quality assessments in coal mining areas in our country and the relevant provisions of the government. On this basis, we built the two-level extension comprehensive evaluation model for the evaluation of ecological environmental quality in mining areas. Finally, we chose a certain coal mining area of Yanzhou Coal Mining Company Limited as the specific case. We used the relevant statistic data, technical and economic indices and the extension evaluation model to do the applied research of the comprehensive evaluation and tested the effectiveness of the comprehensive evaluation model.

Social environmental and economic evaluation diagnosis through application of MADSA (Social and Environmental Evaluation Matrix) customization; Diagnostico de desempenho socioambiental e economico por meio da customizacao da MADSA (Matriz para Avaliacao de Desempenho Socioambiental)

Energy Technology Data Exchange (ETDEWEB)

Ziliotto, Marco Aurelio B.; Villa, Alessandra T.; Padilha, Simone L. Vieira; Canaverde, Patricia Margue [Instituto ECOPLAN, General Carneiro, PR (Brazil); Sanqueta, Carlos Roberto [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil)

2004-07-01

The present paper reports a social, environment and economic diagnosis in an oil and energy organization, in the enlargement of its plant. Attending to some previous requirements made by this company, the diagnosis was accomplished making use of an innovative evaluation tool called MADSA{sup R} (Social and Environmental Evaluation Matrix). Through the customization of this tool, it was possible to evaluate, systematically, the performance of the engaged companies hired by the organization to implement its enterprise, based on proposed actions in QSMS - Quality, Safety, Environment and Health. The performance evaluation was supported by the employees', the organization, its clients' and the local community perception. MADSA{sup R} methodology made it possible to measure the accomplished gain through proposed actions. The development of a performance indicator allowed the comparison between achieved results and accomplished investments. It was concluded that MADSA{sup R} provided subsidies to elaborate an action plan to improve the organization achievements, since it was able to represent the strategy of the organization, to guide and standardize actions, to identify and quantify points to be made better of. (author)

Ecotoxicological evaluation of sediments applied to environmental forensic investigation

Directory of Open Access Journals (Sweden)

R. H. Alves

Full Text Available Abstract The present study aimed to evaluate the potential for using toxicity assays with sediment samples for the detection of water pollution caused by the discharge of tannery effluents into water bodies and its application to environmental forensic investigation. The study included ecotoxicological evaluation of sediments, survey of benthic organisms in the field, as well as chromium, cadmium and lead dosage which provided data for a sediment quality triad evaluation. The sediment samples showed acute and chronic toxicity to the bioindicators, low biodiversity of benthic macrofauna and high chromium concentration, reaching up to 4365 mg.Kg–1. A close relationship was observed between the separate results of ecotoxicological sediment evaluation and the sediment quality triad. The sediment ecotoxicological assessment proved to be applicable to tracking sources of contamination related to tanneries and similar activities in environmental forensics.

1998 Environmental Monitoring Program Report for the Idaho National Engineering and Environmental Laboratory

Energy Technology Data Exchange (ETDEWEB)

L. V. Street

1999-09-01

This report describes the calendar year 1998 compliance monitoring and environmental surveillance activities of the Lockheed Martin Idaho Technologies Company Environmental Monitoring Program performed at the Idaho National Engineering and Environmental Laboratory. This report includes results of sampling performed by the Drinking Water, Effluent, Storm Water, Groundwater Monitoring, and Environmental Surveillance Programs. This report compares the 1998 results to program-specific regulatory guidelines and past data to evaluate trends. The primary purposes of the monitoring and surveillance activities are to evaluate environmental conditions, to provide and interpret data, to verify compliance with applicable regulations or standards, and to ensure protection of public health and the environment. Surveillance of environmental media did not identify any previously unknown environmental problems or trends, which would indicate a loss of control or unplanned releases from facility operations. The INEEL complied with permits and applicable regulations, with the exception of nitrogen samples in a disposal pond effluent stream and iron and total coliform bacteria in groundwater downgradient from one disposal pond. Data collected by the Environmental Monitoring Program demonstrate that the public health and environment were protected.

Human Performance Evaluation System

International Nuclear Information System (INIS)

Hardwick, R.J. Jr.

1985-01-01

Operating nuclear power plants requires high standards of performance, extensive training and responsive management. Despite our best efforts inappropriate human actions do occur, but they can be managed. An extensive review of License Event Reports (LERs) was conducted which indicated continual inadequacy in human performance and in evaluation of root causes. Of some 31,000 LERs, about 5,000 or 16% were directly attributable to inappropriate actions. A recent analysis of 87 Significant Event Reports (issued by INPO in 1983) identified inappropriate actions as being the most frequent root cause (44% of the total). A more recent analysis of SERs issued in 1983 and 1984 indicate that 52% of the root causes were attributed to human performance. The Human Performance Evaluation System (HPES) is a comprehensive, coordinated utility/industry system for evaluating and reporting human performance situtations. HPES is a result of the realization that current reporting system provide limited treatment of human performance and rarely provide adequate information about root causes of inappropriate actions by individuals. The HPES was implemented to identify and eliminate root causes of inappropriate actions

1 Evaluating Biophysical Attributes of Environmentally Degraded ...

African Journals Online (AJOL)

`123456789jkl''''#

Ethiopian Journal of Environmental Studies and Management Vol.4 No. 1 2011. 1 Department of .... land cover types and other physical attributes. (soils and landform ..... Natural water bodies (Rivers). Figure 4: .... permanent or ephemeral rivers. .... evaluating land use/land cover change using participatory ... First Edition.

Environmental Management Performance Report June 2000

Energy Technology Data Exchange (ETDEWEB)

EDER, D.M.

2000-06-01

The purpose of this report is to provide the Department of Energy Richland Operations Office (DOE-RL) a monthly summary of the Project Hanford Management Contractor's (PHMC) Environmental Management (EM) performance by Fluor Hanford (FH) and its subcontractors. In addition to project-specific information, it includes some PHMC-level data not detailed elsewhere in the report. Section A, Executive Summary, provides an executive level summary of the cost, schedule, and technical performance described in this report. It summarizes performance for the period covered, highlights areas worthy of management attention, and provides a forward look to some of the upcoming key performance activities as extracted from the PHMC baseline. The remaining sections provide detailed performance data relative to each individual Project (e.g., Waste Management, Spent Nuclear Fuels, etc.), in support of Section A of the report. Unless otherwise noted, the Safety, Conduct of Operations, and Cost/Schedule data contained herein is as of April 30, 2000. All other information is updated as of May 19, unless otherwise noted.

Towards Reliable Evaluation of Anomaly-Based Intrusion Detection Performance

Science.gov (United States)

Viswanathan, Arun

2012-01-01

variability in training data for anomaly detectors, but has ignored variability in the attack signal that will necessarily affect the evaluation results for such detectors. We posit that current evaluation strategies implicitly assume that attacks always manifest in a stable manner; we show that this assumption is wrong. We describe a simple experiment to demonstrate the effects of environmental noise on the manifestation of attacks in data and introduce the notion of attack manifestation stability. Finally, we argue that conclusions about detector performance will be unreliable and incomplete if the stability of attack manifestation is not accounted for in the evaluation strategy.

48 CFR 2936.604 - Performance evaluation.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Performance evaluation... Performance evaluation. (a) The HCA must establish procedures to evaluate architect-engineer contractor... reports must be made using Standard Form 1421, Performance Evaluation (Architect-Engineer) as prescribed...

48 CFR 236.604 - Performance evaluation.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Performance evaluation... Architect-Engineer Services 236.604 Performance evaluation. (a) Preparation of performance reports. Use DD Form 2631, Performance Evaluation (Architect-Engineer), instead of SF 1421. (2) Prepare a separate...

Repository environmental parameters and models/methodologies relevant to assessing the performance of high-level waste packages in basalt, tuff, and salt

Energy Technology Data Exchange (ETDEWEB)

Claiborne, H.C.; Croff, A.G.; Griess, J.C.; Smith, F.J.

1987-09-01

This document provides specifications for models/methodologies that could be employed in determining postclosure repository environmental parameters relevant to the performance of high-level waste packages for the Basalt Waste Isolation Project (BWIP) at Richland, Washington, the tuff at Yucca Mountain by the Nevada Test Site, and the bedded salt in Deaf Smith County, Texas. Guidance is provided on the identify of the relevant repository environmental parameters; the models/methodologies employed to determine the parameters, and the input data base for the models/methodologies. Supporting studies included are an analysis of potential waste package failure modes leading to identification of the relevant repository environmental parameters, an evaluation of the credible range of the repository environmental parameters, and a summary of the review of existing models/methodologies currently employed in determining repository environmental parameters relevant to waste package performance. 327 refs., 26 figs., 19 tabs.

Repository environmental parameters and models/methodologies relevant to assessing the performance of high-level waste packages in basalt, tuff, and salt

International Nuclear Information System (INIS)

Claiborne, H.C.; Croff, A.G.; Griess, J.C.; Smith, F.J.

1987-09-01

This document provides specifications for models/methodologies that could be employed in determining postclosure repository environmental parameters relevant to the performance of high-level waste packages for the Basalt Waste Isolation Project (BWIP) at Richland, Washington, the tuff at Yucca Mountain by the Nevada Test Site, and the bedded salt in Deaf Smith County, Texas. Guidance is provided on the identify of the relevant repository environmental parameters; the models/methodologies employed to determine the parameters, and the input data base for the models/methodologies. Supporting studies included are an analysis of potential waste package failure modes leading to identification of the relevant repository environmental parameters, an evaluation of the credible range of the repository environmental parameters, and a summary of the review of existing models/methodologies currently employed in determining repository environmental parameters relevant to waste package performance. 327 refs., 26 figs., 19 tabs

The influence of uncertainties of measurements in laboratory performance evaluation using an intercomparison program of radionuclide assays in environmental samples

International Nuclear Information System (INIS)

Tauhata, Luiz; Elizabeth Couto Machado Vianna, Maria; Eduardo de Oliveira, Antonio; Cristina de Melo Ferreira, Ana; Julia Camara da Silva Braganca, Maura; Faria Clain, Almir

2006-01-01

To show the influence of measurement uncertainties in performance evaluation of laboratories, data from 42 comparison runs were evaluated using two statistical criteria. The normalized standard deviation, D, used by US EPA, that mainly takes into account the accuracy, and the normalized deviation, E, that includes the individual laboratory uncertainty used for performance evaluation in the key-comparisons by BIPM. The results show that data evaluated by the different criteria give a significant deviation of laboratory performance in each radionuclide assay when we analyse a large quantity of data

Environmental Management Performance Report May 2000

International Nuclear Information System (INIS)

EDER, D.M.

2000-01-01

The purpose of this report is to provide the Department of Energy Richland Operations Office (DOE-FU) a report of the Project Hanford Management Contractors' (PHMC)' Environmental Management (EM) performance by Fluor Hanford (FH) and its subcontractors. This report is a monthly publication that summarizes the PHMC EM performance. In addition, it includes some PHMC-level data not detailed elsewhere in the report. Section A, Executive Summary, provides an executive level summary of the cost, schedule, and technical performance described in this report. It summarizes performance for the period covered, highlights areas worthy of management attention, and provides a forward look to some of the upcoming key performance activities as extracted from the PHMC baseline. The remaining sections provide detailed performance data relative to each individual Project (e.g., Waste Management, Spent Nuclear Fuels, etc.), in support of Section A of the report. A glossary of terms is provided at the end of this report for reference purposes. Unless otherwise noted, the Safety, Conduct of Operations, Metrics, and Cost/Schedule data contained herein is as of March 31, 2000. All other information is updated as noted

Environmental Management Performance Report May 2000

Energy Technology Data Exchange (ETDEWEB)

EDER, D.M.

2000-05-01

The purpose of this report is to provide the Department of Energy Richland Operations Office (DOE-FU) a report of the Project Hanford Management Contractors' (PHMC)' Environmental Management (EM) performance by Fluor Hanford (FH) and its subcontractors. This report is a monthly publication that summarizes the PHMC EM performance. In addition, it includes some PHMC-level data not detailed elsewhere in the report. Section A, Executive Summary, provides an executive level summary of the cost, schedule, and technical performance described in this report. It summarizes performance for the period covered, highlights areas worthy of management attention, and provides a forward look to some of the upcoming key performance activities as extracted from the PHMC baseline. The remaining sections provide detailed performance data relative to each individual Project (e.g., Waste Management, Spent Nuclear Fuels, etc.), in support of Section A of the report. A glossary of terms is provided at the end of this report for reference purposes. Unless otherwise noted, the Safety, Conduct of Operations, Metrics, and Cost/Schedule data contained herein is as of March 31, 2000. All other information is updated as noted.

Environmental Management Performance Report March 2000

International Nuclear Information System (INIS)

EDER, D.M.

2000-01-01

The purpose of this report is to provide the Department of Energy Richland Operations Office (DOE-RL) a report of the Project Hanford Management Contractors' (PHMC) Environmental Management (EM) performance by Fluor Hanford (FH) and its subcontractors. This report is a monthly publication that summarizes the PHMC EM performance. In addition, it includes some PHMC-level data not detailed elsewhere in the report. Section A, Executive Summary, provides an executive level summary of the cost, schedule, and technical performance described in this report. It summarizes performance for the period covered, highlights areas worthy of management attention, and provides a forward look to some of the upcoming key performance activities as extracted from the PHMC baseline. The remaining sections provide detailed performance data relative to each individual mission area (e.g., Waste Management, Spent Nuclear fuels , etc.), in support of Section A of the report. A glossary of terms is provided at the end of this report for reference purposes. Unless otherwise noted, the Safety, Conduct of Operations, and Cost/schedule data contained herein is as of January 31, 2000. All other information is as of March 1, 2000

Environmental Management Performance Report March 2000

Energy Technology Data Exchange (ETDEWEB)

EDER, D.M.

2000-03-16

The purpose of this report is to provide the Department of Energy Richland Operations Office (DOE-RL) a report of the Project Hanford Management Contractors' (PHMC) Environmental Management (EM) performance by Fluor Hanford (FH) and its subcontractors. This report is a monthly publication that summarizes the PHMC EM performance. In addition, it includes some PHMC-level data not detailed elsewhere in the report. Section A, Executive Summary, provides an executive level summary of the cost, schedule, and technical performance described in this report. It summarizes performance for the period covered, highlights areas worthy of management attention, and provides a forward look to some of the upcoming key performance activities as extracted from the PHMC baseline. The remaining sections provide detailed performance data relative to each individual mission area (e.g., Waste Management, Spent Nuclear fuels , etc.), in support of Section A of the report. A glossary of terms is provided at the end of this report for reference purposes. Unless otherwise noted, the Safety, Conduct of Operations, and Cost/schedule data contained herein is as of January 31, 2000. All other information is as of March 1, 2000.

Economic and environmental performance of the food industry

DEFF Research Database (Denmark)

Akkerman, Renzo; van Donk, Dirk Pieter

2007-01-01

Changing customer requirements, unpredictable disturbances combined with expensive production facilities, are major problems for food processing companies to achieve synergy between the economic and environmental performance. There notably is a lack of tools to support decision to explore effects...

13 CFR 304.4 - Performance evaluations.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Performance evaluations. 304.4... ECONOMIC DEVELOPMENT DISTRICTS § 304.4 Performance evaluations. (a) EDA shall evaluate the management... of at least one (1) other District Organization in the performance evaluation on a cost-reimbursement...

Oil Bypass Filter Technology Performance Evaluation - First Quarterly Report

Energy Technology Data Exchange (ETDEWEB)

Zirker, L.R.; Francfort, J.E.

2003-01-31

This report details the initial activities to evaluate the performance of the oil bypass filter technology being tested by the Idaho National Engineering and Environmental Laboratory (INEEL) for the U.S. Department of Energy's FreedomCAR & Vehicle Technologies Program. Eight full-size, four-cycle diesel-engine buses used to transport INEEL employees on various routes have been equipped with oil bypass systems from the puraDYN Corporation. Each bus averages about 60,000 miles a year. The evaluation includes an oil analysis regime to monitor the presence of necessary additives in the oil and to detect undesirable contaminants. Very preliminary economic analysis suggests that the oil bypass system can reduce life-cycle costs. As the evaluation continues and oil avoidance costs are quantified, it is estimated that the bypass system economics may prove increasingly favorable, given the anticipated savings in operational costs and in reduced use of oil and waste oil avoidance.

OECD environmental performance reviews: Poland

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-06-01

The review surveys the environmental conditions and environmental progress of Poland. It found that although most environmental targets were met Poland still faces challenges in complying with EU environmental laws. Topics covered are: environmental management; air, water and waste management; nature and biodiversity; economy and environment; sectoral integration: transport; and international co-operation. Top issues for conformity include pollution prevention, waste water treatment, waste management, biodiversity and landscape conservation, and climate protection. The review outlines 46 recommendations for the country to take in order to improve its environmental situation. Task areas include progressing toward meeting international environmental commitments and integrating environmental considerations in to economic policies through means such as improved rice signals, subsidy removal, and fiscal reforms.

Evaluation of environmental radiation dose in Ibaraki Prefecture

International Nuclear Information System (INIS)

Koike, Ryoji

1977-01-01

In Ibaraki Prefecture, there is Environmental Radioactivity Surveillance Committee in order to ensure the safety around nuclear power facilities. Environmental radioactivity data are collected every three months, and the grasp of the present situation, the clarification of causes, the evaluation of dose and the publication of results are made. Two instances in particular are described: of contamination paddies due to 14 C contained in drainage; contamination of rivers due to U contained in drainage. (Mori, K.)

Prolonged self-paced exercise in the heat - environmental factors affecting performance

DEFF Research Database (Denmark)

Junge, Nicklas; Jørgensen, Rasmus; Flouris, Andreas D

2016-01-01

) was on average reduced by 15% in the 14 studies that fulfilled the inclusion criteria. Ambient temperature per se was a poor predictor of the integrated environmental heat stress and 2 of the prevailing heat stress indices (WBGT and UTCI) failed to predict the environmental influence on performance. The weighing......In this review we examine how self-paced performance is affected by environmental heat stress factors during cycling time trial performance as well as considering the effects of exercise mode and heat acclimatization. Mean power output during prolonged cycling time trials in the heat (≥30°C...... of wind speed appears to be too low for predicting the effect for cycling in trained acclimatized subjects, where performance may be maintained in outdoor time trials at ambient temperatures as high as 36°C (36°C UTCI; 28°C WBGT). Power output during indoor trials may also be maintained with temperatures...

Survey and analysis of environmental performance indicators applied to thermoelectric generation styles; Levantamento e analise de indicadores de desempenho ambiental aplicados a empreendimentos termeletricos

Energy Technology Data Exchange (ETDEWEB)

Freitas, Bruno Moreno Rodrigo de; Cardoso Junior, Ricardo Abranches Felix [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil)

2010-07-01

Country economic growth is proportional bond to it electric generation increasing capacity. Brazil, which has a power matrix predominantly renewable, currently is increasing generation, from thermoelectricity, due, mainly, to major facilities in relation to environmental licensing. Since this new Thermal Power Plants operating, tied to the generation with those ones already installed, will result in environmental impacts that must be properly controlled. Such control should follow the Environmental Performance Evaluation guidance, standardized by ABNT NBR ISO 14031/04. Therefore, the following work presents the main Environmental Performance Indicators applied to several thermoelectric generation styles (Oil, Natural Gas, Diesel, Mineral Coal, Biomass, Waste, Solar and Nuclear). (author)

Evaluation of Monticello Nuclear Power Plant, Environmental Impact Prediction, based on monitoring programs

International Nuclear Information System (INIS)

Gore, K.L.; Thomas, J.M.; Kannberg, L.D.; Watson, D.G.

1976-11-01

This report evaluates quantitatively the nonradiological environmental monitoring programs at Monticello Nuclear Generating Plant. The general objective of the study is to assess the effectiveness of monitoring programs in the measurement of environmental impacts. Specific objectives include the following: (1) Assess the validity of environmental impact predictions made in the Environmental Statement by analysis of nonradiological monitoring data; (2) evaluate the general adequacy of environmental monitoring programs for detecting impacts and their responsiveness to Technical Specifications objectives; (3) assess the adequacy of preoperational monitoring programs in providing a sufficient data base for evaluating operational impacts; (4) identify possible impacts that were not predicted in the environmental statement and identify monitoring activities that need to be added, modified or deleted; and (5) assist in identifying environmental impacts, monitoring methods, and measurement problems that need additional research before quantitative predictions can be attempted. Preoperational as well as operational monitoring data were examined to test the usefulness of baseline information in evaluating impacts. This included an examination of the analytical methods used to measure ecological and physical parameters, and an assessment of sampling periodicity and sensitivity where appropriate data were available

The environmental evaluation of substation based on the fuzzy analytic hierarchy process

Science.gov (United States)

Qian, Wenxiao; Zuo, Xiujiang; Chen, Yuandong; Ye, Ming; Fang, Zhankai; Yang, Fan

2018-02-01

This paper studies on the different influences on the environment of the substations and puts forward an index system of environmental protection through the fuzzy analytic hierarchy process. A comprehensive environmental evaluation on a substation is carried out through investigation and measurement of the current environmental factors, and the statistical data has validated the effectiveness and feasibility of this evaluation index system. The results indicate that the proposed model has high efficiency.

The environmental performance of current and future passenger vehicles: Life cycle assessment based on a novel scenario analysis framework

International Nuclear Information System (INIS)

Bauer, Christian; Hofer, Johannes; Althaus, Hans-Jörg; Del Duce, Andrea; Simons, Andrew

2015-01-01

Highlights: • We perform Life Cycle Assessment (LCA) of current and future passenger vehicles. • We include gasoline, diesel and natural gas as well as battery and fuel cell cars. • An integrated vehicle simulation framework guarantees consistency. • Only electric cars with “clean” electricity and H_2 allow for pollution mitigation. • Complete LCA is mandatory for environmental evaluation of vehicle technologies. - Abstract: This paper contains an evaluation of the environmental performance of a comprehensive set of current and future mid-size passenger vehicles. We present a comparative Life Cycle Assessment (LCA) based on a novel integrated vehicle simulation framework, which allows for consistency in vehicle parameter settings and consideration of future technological progress. Conventional and hybrid gasoline, diesel and natural gas cars as well as battery and fuel cell electric vehicles (BEV and FCV) are analyzed, taking into account electricity and hydrogen production chains from fossil, nuclear and renewable energy resources. Our results show that a substantial mitigation of climate change can be obtained with electric passenger vehicles, provided that non-fossil energy resources are used for electricity and hydrogen production. However, in terms of other environmental burdens such as acidification, particulate matter formation, and toxicity, BEV may in some cases and FCV are likely to perform worse than modern fossil fueled cars as a consequence of emissions along vehicle and fuel production chains. Therefore, the electrification of road transportation should be accompanied by an integration of life cycle management in vehicle manufacturing chains as well as energy and transport policies in order to counter potential environmental drawbacks.

Reaching Residents of Green Communities: Evaluation of a Unique Environmental Education Program

Science.gov (United States)

Hostetler, Mark; Swiman, Elizabeth; Prizzia, Anna; Noiseux, Krystal

2008-01-01

Often in green communities, homeowner understanding is left out of the project. We evaluated the impact of a new environmental education program installed in a green community, Town of Harmony, Florida. Consisting of educational kiosks, website, and brochure, we evaluated whether Harmony residents' environmental knowledge, attitudes, and behaviors…

Quantitative Guidance for Stove Usage and Performance to Achieve Health and Environmental Targets.

Science.gov (United States)

Johnson, Michael A; Chiang, Ranyee A

2015-08-01

Displacing the use of polluting and inefficient cookstoves in developing countries is necessary to achieve the potential health and environmental benefits sought through clean cooking solutions. Yet little quantitative context has been provided on how much displacement of traditional technologies is needed to achieve targets for household air pollutant concentrations or fuel savings. This paper provides instructive guidance on the usage of cooking technologies required to achieve health and environmental improvements. We evaluated different scenarios of displacement of traditional stoves with use of higher performing technologies. The air quality and fuel consumption impacts were estimated for these scenarios using a single-zone box model of indoor air quality and ratios of thermal efficiency. Stove performance and usage should be considered together, as lower performing stoves can result in similar or greater benefits than a higher performing stove if the lower performing stove has considerably higher displacement of the baseline stove. Based on the indoor air quality model, there are multiple performance-usage scenarios for achieving modest indoor air quality improvements. To meet World Health Organization guidance levels, however, three-stone fire and basic charcoal stove usage must be nearly eliminated to achieve the particulate matter target (< 1-3 hr/week), and substantially limited to meet the carbon monoxide guideline (< 7-9 hr/week). Moderate health gains may be achieved with various performance-usage scenarios. The greatest benefits are estimated to be achieved by near-complete displacement of traditional stoves with clean technologies, emphasizing the need to shift in the long term to near exclusive use of clean fuels and stoves. The performance-usage scenarios are also provided as a tool to guide technology selection and prioritize behavior change opportunities to maximize impact.

Sustainability evaluation of Sicily's lemon and orange production: an energy, economic and environmental analysis.

Science.gov (United States)

Pergola, M; D'Amico, M; Celano, G; Palese, A M; Scuderi, A; Di Vita, G; Pappalardo, G; Inglese, P

2013-10-15

The island of Sicily has a long standing tradition in citrus growing. We evaluated the sustainability of orange and lemon orchards, under organic and conventional farming, using an energy, environmental and economic analysis of the whole production cycle by using a life cycle assessment approach. These orchard systems differ only in terms of a few of the inputs used and the duration of the various agricultural operations. The quantity of energy consumption in the production cycle was calculated by multiplying the quantity of inputs used by the energy conversion factors drawn from the literature. The production costs were calculated considering all internal costs, including equipment, materials, wages, and costs of working capital. The performance of the two systems (organic and conventional), was compared over a period of fifty years. The results, based on unit surface area (ha) production, prove the stronger sustainability of the organic over the conventional system, both in terms of energy consumption and environmental impact, especially for lemons. The sustainability of organic systems is mainly due to the use of environmentally friendly crop inputs (fertilizers, not use of synthetic products, etc.). In terms of production costs, the conventional management systems were more expensive, and both systems were heavily influenced by wages. In terms of kg of final product, the organic production system showed better environmental and energy performances. Copyright © 2013 Elsevier Ltd. All rights reserved.

48 CFR 36.604 - Performance evaluation.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Performance evaluation. 36.604 Section 36.604 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL... Performance evaluation. See 42.1502(f) for the requirements for preparing past performance evaluations for...

Performance evaluation and financial market runs

NARCIS (Netherlands)

Wagner, W.B.

2013-01-01

This paper develops a model in which performance evaluation causes runs by fund managers and results in asset fire sales. Performance evaluation nonetheless is efficient as it disciplines managers. Optimal performance evaluation combines absolute and relative components in order to make runs less

Performance Evaluations in Audit Firms

DEFF Research Database (Denmark)

Riise Johansen, Thomas; Christoffersen, Jeppe

2017-01-01

Previous research has only minimally examined the association between the behaviour and performance evaluations of individual auditors beyond the use of efficiency-focused evaluations. We examine the association between dysfunctional auditor behaviour and three evaluation foci: an efficiency focus......, a client focus and a quality focus. Our results, which are based on questionnaire responses from 196 auditors, demonstrate that an efficiency focus is not associated with dysfunctional behaviour. A client focus is found to be associated with dysfunctional behaviour. Finally, and perhaps most importantly......, our results show that it seems possible to limit dysfunctional behaviours through a quality focus in performance evaluations. Our results provide insights of use to practitioners and regulators on how performance evaluations may not only induce but also reduce dysfunctional auditor behaviours....

Evaluation of transboundary environmental issues in Central Europe

Energy Technology Data Exchange (ETDEWEB)

Engi, D. [Sandia National Labs., Albuquerque, NM (United States). Corporate Planning and Strategic Business Development Div.; Kapustka, L.A.; Williams, B.A.; Meganck, R.A.; Garrison, J.G. [Ecological Planning and Toxicology, Inc., Corvallis, OR (United States); Glicken, J. [Ecological Planning and Toxicology, Inc., Albuquerque, NM (United States); Hostetler, C.J.; Lawrence, S. [Columbia Environmental Services, Inc., Kennewick, WA (United States)

1997-05-01

Central Europe has experienced environmental degradation for hundreds of years. The proximity of countries, their shared resources, and transboundary movement of environmental pollution, create the potential for regional environmental strife. The goal of this project was to identify the sources and sinks of environmental pollution in Central Europe and evaluate the possible impact of transboundary movement of pollution on the countries of Central Europe. In meeting the objectives of identifying sources of contaminants, determining transboundary movement of contaminants, and assessing socio-economic implications, large quantities of disparate data were examined. To facilitate use of the data, the authors refined mapping procedures that enable processing information from virtually any map or spreadsheet data that can be geo-referenced. Because the procedure is freed from a priori constraints of scale that confound most Geographical Information Systems, they have the capacity to generate new projections and apply sophisticated statistical analyses to the data. The analysis indicates substantial environmental problems. While transboundary pollution issues may spawn conflict among the Central European countries and their neighbors, it appears that common environmental problems facing the entire region have had the effect of bringing the countries together, even though opportunities for deteriorating relationships may still arise.

The Impact of Energy Prices on Employment and Environmental Performance: Evidence from French Manufacturing Establishments

International Nuclear Information System (INIS)

Marin, Giovanni; Vona, Francesco

2017-01-01

This paper evaluates the historical influence of energy prices on a series of measures of environmental and economic performance for a panel of French manufacturing establishments over the period 1997-2010. The focus on energy prices is motivated by the fact that changes in environmental and energy policies have been dominated by substantial reductions in discounts for large consumers, making the evaluation of each policy in isolation exceedingly difficult. To identify price effects, we construct a shift-share instrument that captures only the exogenous variation in establishment-specific energy prices. Our results highlight a trade-off between environmental and economic goals: although a 10 percent increase in energy prices brings about a 6 percent reduction in energy consumption and to a 11 percent reduction in CO_2 emissions, such an increase also has a modestly negative impact on employment (-2.6 percent) and very small impact on wages and productivity. The negative employment effects are mostly concentrated in energy-intensive and trade-exposed sectors. Simulating the effect of a carbon tax, we show that job losses for the most exposed sectors can be quite large. However, these effects are upper bounds and we show that they are significantly mitigated in multi-plant firms by labor reallocation across establishments. (authors)

The environmental performance of three alcohol fuel plants producers of small, medium and big scale; O desempenho eco-ambiental de tres usinas produtoras de alcool combustivel de pequeno, medio e grande porte

Energy Technology Data Exchange (ETDEWEB)

Borrero, Manuel Antonio Valdes; Pereira, Jose Tomaz Vieira [Universidade Estadual de Campinas, SP (Brazil); Miranda, Evaristo Eduardo de [Empresa Brasileira de Pesquisa Agropecuaria, Campinas, SP (Brazil). Nucleo de Monitoramento Ambiental e de Recursos Naturais por Satelite

1999-07-01

The article discusses the following issues of alcohol fuel plants producers: sizing; performance; natural resources; environmental aspects; and electric power generation. The environmental performance concept is introduced and a performance evaluation methodology are presented and applied. The results are also presented and criticized.

Effect of R&D Collaboration with Research Organizations on Innovation: The Mediation Effect of Environmental Performance

Directory of Open Access Journals (Sweden)

Gun Jea Yu

2015-08-01

Full Text Available The purpose of this study was to advance our understanding of corporate environmental performance by linking its antecedents and consequences. This study examined how collaboration with research organizations, as a proactive strategic decision, influences the environmental performance of firms, which in turn leads to innovation performance. Using the data collected from 597 Korean firms representing a cross-section of industries, we found that a firm’s collaboration with research organizations positively affected the firm’s environmental performance, which positively influenced its innovation performance. Furthermore, the results indicated a full mediation effect of environmental performance on the relationship between collaboration with research organizations and innovation performance. This study offers a more comprehensive understanding of corporate environmental performance and discusses implications for innovation performance. Limitations and future research directions are also discussed.

Interrelationship between a brand’s environmental embeddedness, brand awareness and company performance

Directory of Open Access Journals (Sweden)

Ivana First

2007-07-01

Full Text Available The purpose of the research was to define and measure a brand’s environmental embeddedness that, unlike the constructs used in previous environmental research, measures to which extent brand identity is embedded in environmental values. The purpose was also to assess a correlation of this variable to brand awareness and company performance. This study is based on three overlapping theoretical backgrounds: brand management, corporate social responsibility and organizational culture. Secondary data as well as content analysis and survey-based primary data were used. The results indicate a correlation between the environmental embeddedness of brands and brand awareness, but no correlation of these two variables to company performance. Such results support the idea that companies should indeed invest in being environmentally friendly so as to increase their chances of being recognized, while also indicating that the companies that own strong brands cannot afford not to be environmentally conscious as that could hurt their corporate brand values.

Evaluation and importance of the environmental concern within the environmental medicine; Erfassung und Bedeutung der Umweltbesorgnis in der Umweltmedizin

Energy Technology Data Exchange (ETDEWEB)

Rethage, T.

2007-07-01

The book discusses the importance of environmental concerns and annoyance in connection with health-related parameters, such as discomfort, health-related life quality and sleep quality. The evaluation methods and materials (definition of evaluated collectives) are described. The discussion covers the characterization of environmental concerns, their multi-dimensionality and the concerns in case of specific exposures (smells, noise, electromagnetic fields, environment medical ambulance).

Annual health, safety and environmental performance report for 1992

International Nuclear Information System (INIS)

Orman, R.F.; Richards, S.

1993-12-01

This report summarizes the safety and environmental record of the operations of Atomic Energy of Canada Limited (AECL) during 1992. An introduction highlights the results and describes the facilities and organizational systems. Subsequent sections indicate the performance of the company with respect to personnel radiation exposures, occupational injuries, the handling of wastes and the release of materials into the environment. Programs in health, safety and environmental protection are presented, along with site remediation and emergency preparedness practices

Annual health, safety and environmental performance report for 1992

International Nuclear Information System (INIS)

Orman, R.F.; Richards, S.

1993-12-01

This report summarizes the safety and environmental record of the operations of Atomic Energy of Canada Limited (AECL) during 1992. an introduction highlights the results and describes the facilities and organizational systems. Subsequent sections indicate the performance of the company with respect to personnel radiation exposures, occupational injuries, the handling of wastes and the release of materials into the environment. Programs in health, safety and environmental protection are presented, along with site remediation and emergency preparedness practices

Sustainable-value stream mapping to evaluate sustainability performance: case study in an Indonesian furniture company

Directory of Open Access Journals (Sweden)

Hartini Sri

2018-01-01

Full Text Available Lean manufacturing tools do not consider environmental and societal benefits. The conventional value stream mapping (VSM methodology examines the economics of a manufacturing line, most of which are in regards to time (cycle time, lead time, change-out time, etc.. Incorporating the capability to capture environmental and societal performance visually through VSMs will increase its usefulness as a tool that can be used to assess manufacturing operations from a sustainability perspective. A number of studies have addressed the extension of VSM to incorporate additional criteria. A vast majority of these efforts have focused on adding energy-related metrics to VSMs, while several other studies refer to ‘sustainable’ VSM by including environmental performance in conventional VSMs. This research has developed a method for VSM integrated with environment metric and social metric for ensuring sustainable manufacture. The proposed technique is capable of visualizing and evaluating manufacturing process performance from sustainability view point. The capability of proposed technique has been tested by an application study on furniture company. The study provides insights to practitioners to visualize process performance in economic, environment and social metric.

Pengaruh Corporate Social Responsibility Disclosure Dan Environmental Performance Terhadap Economic Performance Pada Perusahaan Manufaktur Yang Terdaftar Di Bursa Efek Indonesia

OpenAIRE

Saputri, Novitasari; Heriningsih, Sucahyo

2012-01-01

This research is aimed to examine effect Corporate Social Responsibility(CSR) Disclosure and EnvironmentalPerformance on Economic Performance.This research used Corporate Social Responsibility Index (CSDI) asmeasure of CSR, Proper Index as measure of Environmental Performance and Return on Equity (ROE) asmeasure of Economic Performance. The samples of this research are 11 manufactur firms listed at IndonesianStock Exchange year 2006 until 2009. The research hyphotesis were tested using mu...

Analysis of Two Models for Evaluating the Energy Performance of Different Buildings

Directory of Open Access Journals (Sweden)

Luca Evangelisti

2014-08-01

Full Text Available Nowadays it is possible to employ several software packages to evaluate building’s energy performance, each of them based on a different calculation code, with different boundary conditions in terms of environmental temperature, solar radiation, wind velocity and relative humidity. In this contribution, a comparison between two calculation codes, taking into account different types of buildings, has been carried out. In particular, a semi-stationary calculation code and a dynamic one have been employed to determine energy demands of three different building’s types: an old building, a house and a flat. Analyzing semi-stationary conditions (consequently simplified environmental conditions, a software which applies the UNI TS 11300 standard has been considered. This standard defines the procedures for the national implementation of the UNI EN ISO 13790. Furthermore, in order to consider the environmental conditions variation, a well-known dynamic software has been used.

Environmental Education Evaluation: Time to Reflect, Time for Change

Science.gov (United States)

Crohn, Kara; Birnbaum, Matthew

2010-01-01

Evaluation in environmental education is fairly nascent despite decades-long attention to its importance. In setting the context for future chapters appearing in this special issue of the "Journal of Evaluation and Program Planning," attention is devoted to the political circumstances associated with retrenchment in the public sector and increased…

1997 LMITCO Environmental Monitoring Program Report for the Idaho National Engineering and Environmental Laboratory

Energy Technology Data Exchange (ETDEWEB)

Andersen, B.; Street, L.; Wilhelmsen, R.

1998-09-01

This report describes the calendar year 1997 environmental surveillance and compliance monitoring activities of the Lockheed Martin Idaho Technologies Company Environmental Monitoring Program performed at the Idaho National Engineering and Environmental Laboratory. This report includes results of sampling performed by the Radiological Environmental Surveillance, Site Environmental Surveillance, Drinking Water, Effluent Monitoring, Storm Water Monitoring, Groundwater Monitoring, and Special Request Monitoring Programs and compares 1997 data with program-specific regulatory guidelines and past data to evaluate trends. The primary purposes of the surveillance and monitoring activities are to evaluate environmental conditions, to provide and interpret data, to verify compliance with applicable regulations or standard, and to ensure protection of human health and the environment. Surveillance of environmental media did not identify any previously unknown environmental problems or trends indicating a loss of control or unplanned releases from facility operations. With the exception of one nitrogen sample in the disposal pond effluent stream and iron and total coliform bacteria in groundwater downgradient from one disposal pond, compliance with permits and applicable regulations was achieved. Data collected by the Environmental Monitoring Program demonstrate that public health and the environment were protected.

U.S. ENVIRONMENTAL PROTECTION AGENCY (EPA) ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM: ARSENIC MONITORING TECHNOLOGIES

Science.gov (United States)

The U.S. Environmental Protection Agency Environmental Technology Verification (ETV) program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This technology ...

Evaluating efficacy of an environmental policy to prevent biological invasions.

Science.gov (United States)

Bailey, Sarah A; Deneau, Matthew G; Jean, Laurent; Wiley, Chris J; Leung, Brian; MacIsaac, Hugh J

2011-04-01

Enactment of any environmental policy should be followed by an evaluation of its efficacy to ensure optimal utilization of limited resources, yet measuring the success of these policies can be a challenging task owing to a dearth of data and confounding factors. We examine the efficacy of ballast water policies enacted to prevent biological invasions in the Laurentian Great Lakes. We utilize four criteria to assess the efficacy of this environmental regulation: (1) Is the prescribed management action demonstrably effective? (2) Is the management action effective under operational conditions? (3) Can compliance be achieved on a broad scale? (4) Are desired changes observed in the environment? The four lines of evidence resulting from this analysis indicate that the Great Lakes ballast water management program provides robust, but not complete, protection against ship-mediated biological invasions. Our analysis also indicates that corresponding inspection and enforcement efforts should be undertaken to ensure that environmental policies translate into increased environmental protection. Similar programs could be implemented immediately around the world to protect the biodiversity of the many freshwater ecosystems which receive ballast water discharges by international vessels. This general framework can be extended to evaluate efficacy of other environmental policies.

Environmental evaluation of municipal waste prevention

DEFF Research Database (Denmark)

Gentil, Emmanuel; Gallo, Daniele; Christensen, Thomas Højlund

2011-01-01

society, using life-cycle thinking. The partial prevention of unsolicited mail, beverage packaging and food waste is tested for a “High-tech” waste management system relying on high energy and material recovery and for a “Low-tech” waste management system with less recycling and relying on landfilling......Waste prevention has been addressed in the literature in terms of the social and behavioural aspects, but very little quantitative assessment exists of the environmental benefits. Our study evaluates the environmental consequences of waste prevention on waste management systems and on the wider....... Prevention of 13% of the waste mass entering the waste management system generates a reduction of loads and savings in the waste management system for the different impacts categories; 45% net reduction for nutrient enrichment and 12% reduction for global warming potential. When expanding our system...

Economic and Environmental Performances of Small-Scale Rural PV Solar Projects under the Clean Development Mechanism: The Case of Cambodia

Directory of Open Access Journals (Sweden)

Ellen De Schepper

2015-09-01

Full Text Available The two core objectives of the Clean Development Mechanism (CDM are cost-effective emission reduction and sustainable development. Despite the potential to contribute to both objectives, solar projects play a negligible role under the CDM. In this research, the greenhouse gas mitigation cost is used to evaluate the economic and environmental performances of small-scale rural photovoltaic solar projects. In particular, we compare the use of absolute and relative mitigation costs to evaluate the attractiveness of these projects under the CDM. We encourage the use of relative mitigation costs, implying consideration of baseline costs that render the projects profitable. Results of the mitigation cost analysis are dependent on the baseline chosen. To overcome this drawback, we complement the analysis with a multi-objective optimization approach, which allows quantifying the trade-off between economic and environmental performances of the optimal technologies without requiring a baseline.

Dry Process Fuel Performance Evaluation

Energy Technology Data Exchange (ETDEWEB)

Yang, Myung Seung; Song, K. C.; Moon, J. S. and others

2005-04-15

The objective of the project is to establish the performance evaluation system of DUPIC fuel during the Phase II R and D. In order to fulfil this objectives, irradiation test of DUPIC fuel was carried out in HANARO using the non-instrumented and SPND-instrumented rig. Also, the analysis on the in-reactor behavior analysis of DUPIC fuel, out-pile test using simulated DUPIC fuel as well as performance and integrity assessment in a commercial reactor were performed during this Phase. The R and D results of the Phase II are summarized as follows : - Performance evaluation of DUPIC fuel via irradiation test in HANARO - Post irradiation examination of irradiated fuel and performance analysis - Development of DUPIC fuel performance code (modified ELESTRES) considering material properties of DUPIC fuel - Irradiation behavior and integrity assessment under the design power envelope of DUPIC fuel - Foundamental technology development of thermal/mechanical performance evaluation using ANSYS (FEM package)

Dry Process Fuel Performance Evaluation

International Nuclear Information System (INIS)

Yang, Myung Seung; Song, K. C.; Moon, J. S. and others

2005-04-01

The objective of the project is to establish the performance evaluation system of DUPIC fuel during the Phase II R and D. In order to fulfil this objectives, irradiation test of DUPIC fuel was carried out in HANARO using the non-instrumented and SPND-instrumented rig. Also, the analysis on the in-reactor behavior analysis of DUPIC fuel, out-pile test using simulated DUPIC fuel as well as performance and integrity assessment in a commercial reactor were performed during this Phase. The R and D results of the Phase II are summarized as follows : - Performance evaluation of DUPIC fuel via irradiation test in HANARO - Post irradiation examination of irradiated fuel and performance analysis - Development of DUPIC fuel performance code (modified ELESTRES) considering material properties of DUPIC fuel - Irradiation behavior and integrity assessment under the design power envelope of DUPIC fuel - Foundamental technology development of thermal/mechanical performance evaluation using ANSYS (FEM package)

Developments in life cycle assessment applied to evaluate the environmental performance of construction and demolition wastes.

Science.gov (United States)

Bovea, M D; Powell, J C

2016-04-01

This paper provides a review of the literature that applies the life cycle assessment (LCA) methodology to the assessment of the environmental performance of the life cycle of construction and demolition waste (CDW) management systems. This article is focused on generating a general mapping of the literature and on identifying the best practices in compliance with LCA framework and proposing directions for future LCA studies in this field. The temporal evolution of the research in this field and the aim of the studies have grown in parallel with the legal framework related to waste and energy efficiency of buildings. Most studies have been published in Europe, followed by USA. Asia and Australia, being at an incipient application stage to the rest of the world. Topics related to "LCA of buildings, including their EoL" and "LCA of general CDW management strategies" are the most frequently analysed, followed by "LCA of EoL of construction elements" and "LCA of natural material vs recycled material". Regarding the strategies, recycling off-site and incineration, both combined with landfill for the rejected fractions, are the most commonly applied. Re-use or recycling on-site is the strategy least applied. The key aspect when LCA is applied to evaluate CDW management systems is the need to normalise which processes to include in the system boundary and the functional unit, the use of inventory data adapted to the context of the case study and the definition of a common set of appropriate impact assessment categories. Also, it is important to obtain results disaggregated by unit processes. This will allow the comparison between case studies. Copyright © 2016 Elsevier Ltd. All rights reserved.

Exploring the Impact of Complementary Assets on the Environmental Performance in Manufacturing SMEs

Directory of Open Access Journals (Sweden)

Chungwon Woo

2014-10-01

Full Text Available As the impact of small and medium-sized enterprises (SMEs on the environment increases, there is a need for effective environmental policies to sustain their development. Under this condition, SMEs implement innovation to meet environmental regulations and to achieve environmental competitiveness in sustainability. We examine the impact of environmental innovation on labor productivity in SME manufacturers. The literature shows that complementary assets help SMEs to increase their performance in environmental innovation. Therefore, we study the interactive effects of the SMEs’ business-group affiliation and the listing status on the relationship between environmental innovation and labor productivity. We add these interaction terms to multivariate regressions by using the 2010 Korea Innovation Survey. The results show that SMEs are able to use environmental innovation as a business strategy for green growth with improved labor productivity. Also, the results highlight that the business-group affiliation and the listing status as the complementary assets positively moderate the performance of the environmental innovation of the SMEs.

Performance objectives and criteria for conducting DOE environmental audits

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-01-01

This document contains the Performance Objectives and Criteria (POC) that have been developed for environmental audits and assessments conducted by the Office of the Assistant Secretary for Environment, Safety and Health. The Environmental POC can serve multiple purposes. Primarily, they are to serve as guidelines for the technical specialists conducted the audits and assessments, and for the team management. The POC can also serve as supporting documents for training of technical discipline specialists and Team Leaders and as bases for DOE programs and field offices and contractors conducting audit or assessment activities or improving environmental protection programs. It must be recognized that not all of the POC will necessarily apply to all DOE facilities. The users of this document must rely upon their knowledge of the facility and their professional judgment, or the judgment of qualified environmental professionals to determine the applicability of each POC. The POC cover eleven technical disciplines: air; surface water and drinking water quality; groundwater; waste management; toxic and chemical materials; radiation; quality assurance; inactive waste sites and releases; ecological and cultural resources; the National Environmental Policy Act (NEPA); and environmental management systems.

Performance objectives and criteria for conducting DOE environmental audits

International Nuclear Information System (INIS)

1994-01-01

This document contains the Performance Objectives and Criteria (POC) that have been developed for environmental audits and assessments conducted by the Office of the Assistant Secretary for Environment, Safety and Health. The Environmental POC can serve multiple purposes. Primarily, they are to serve as guidelines for the technical specialists conducted the audits and assessments, and for the team management. The POC can also serve as supporting documents for training of technical discipline specialists and Team Leaders and as bases for DOE programs and field offices and contractors conducting audit or assessment activities or improving environmental protection programs. It must be recognized that not all of the POC will necessarily apply to all DOE facilities. The users of this document must rely upon their knowledge of the facility and their professional judgment, or the judgment of qualified environmental professionals to determine the applicability of each POC. The POC cover eleven technical disciplines: air; surface water and drinking water quality; groundwater; waste management; toxic and chemical materials; radiation; quality assurance; inactive waste sites and releases; ecological and cultural resources; the National Environmental Policy Act (NEPA); and environmental management systems

1992 Environmental Summer Science Camp Program evaluation. The International Environmental Institute of Westinghouse Hanford Company

Energy Technology Data Exchange (ETDEWEB)

1993-07-01

This report describes the 1992 Westinghouse Hanford Company/US Department of Energy Environmental Summer Science Camp. The objective of the ``camp`` was to motivate sixth and seventh graders to pursue studies in math, science, and the environment. This objective was accomplished through hands-on fun activities while studying the present and future challenges facing our environment. The camp was funded through Technical Task Plan, 424203, from the US Department of Energy-Headquarters, Office of Environmental Restoration and Waste Management, Technology Development,to Westinghouse Hanford Company`s International Environmental Institute, Education and Internship Performance Group.

Proposal of an environmental performance index to assess solid waste treatment technologies.

Science.gov (United States)

Coelho, Hosmanny Mauro Goulart; Lange, Liséte Celina; Coelho, Lineker Max Goulart

2012-07-01

Although the concern with sustainable development and environment protection has considerably grown in the last years it is noted that the majority of decision making models and tools are still either excessively tied to economic aspects or geared to the production process. Moreover, existing models focus on the priority steps of solid waste management, beyond waste energy recovery and disposal. So, in order to help the lack of models and tools aiming at the waste treatment and final disposal, a new concept is proposed: the Cleaner Treatment, which is based on the Cleaner Production principles. This paper focuses on the development and validation of the Cleaner Treatment Index (CTI), to assess environmental performance of waste treatment technologies based on the Cleaner Treatment concept. The index is formed by aggregation (summation or product) of several indicators that consists in operational parameters. The weights of the indicator were established by Delphi Method and Brazilian Environmental Laws. In addition, sensitivity analyses were carried out comparing both aggregation methods. Finally, index validation was carried out by applying the CTI to 10 waste-to-energy plants data. From sensitivity analysis and validation results it is possible to infer that summation model is the most suitable aggregation method. For summation method, CTI results were superior to 0.5 (in a scale from 0 to 1) for most facilities evaluated. So, this study demonstrates that CTI is a simple and robust tool to assess and compare the environmental performance of different treatment plants being an excellent quantitative tool to support Cleaner Treatment implementation. Copyright © 2012 Elsevier Ltd. All rights reserved.