Handbook of environmental isotope geochemistry

Energy Technology Data Exchange (ETDEWEB)

Baskaran, Mark (ed.) [Wayne State Univ., Detroit, MI (United States). Dept. Geology

2011-07-01

Applications of radioactive and stable isotopes have revolutionized our understanding of the Earth and near-earth surface processes. The utility of the isotopes are ever-increasing and our sole focus is to bring out the applications of these isotopes as tracers and chronometers to a wider audience so that they can be used as powerful tools to solve environmental problems. New developments in this field remain mostly in peer-reviewed journal articles and hence our goal is to synthesize these findings for easy reference for students, faculty, regulators in governmental and non-governmental agencies, and environmental companies. While this volume maintains its rigor in terms of its depth of knowledge and quantitative information, it contains the breadth needed for wide variety problems and applications in the environmental sciences. This volume presents all of the newer and older applications of isotopes pertaining to the environmental problems in one place that is readily accessible to readers. This book not only has the depth and rigor that is needed for academia, but it has the breadth and case studies to illustrate the utility of the isotopes in a wide variety of environments (atmosphere, oceans, lakes, rivers and streams, terrestrial environments, and sub-surface environments) and serves a large audience, from students and researchers, regulators in federal, state and local governments, and environmental companies. (orig.)

Tritium and other environmental isotopes in the hydrological cycle

Energy Technology Data Exchange (ETDEWEB)

1967-04-01

It is common knowledge that water world resources are being increasingly strained to meet the requirements of the growth of population, industry and agriculture. Nuclear techniques are being applied to the problem of water shortage in two quite different ways: in nuclear desalination, and in hydrological investigations and development. The use of isotopes in hydrological investigation is, however, not very widely known. One of the principal obstacles to the application of the environmental isotopes by the hydrologist is that there is relatively little information on the techniques in the literature. This report attempts to improve that situation - principally for tritium - by assembling information on such matters as the precipitation of tritium, its input into the ground-water, and sampling techniques. Refs, figs and tabs.

Environmental isotope survey

International Nuclear Information System (INIS)

Jacovides, J.S.

1979-03-01

Work was initiated on the 1st of September 1971 with the objective of finding out how best to use environmental isotopes in the interpretation of the hydrology, particularly subsurface hydrology, of Cyprus through a sparse reconnaissance sampling of all the major aquifers and springs covering the whole island. The distribution of sampling was such that the survey in itself could assist in clarifying particular hydrogeologic problems, provide a better understanding of the water systems of the island, establish a general environmental isotope - framework of the hydrologic regimen of Cyprus as well as to provide the basis for specific, more detailed, studies to be undertaken subsequently

Application of environmental isotopes in water resources studies in Latin America

International Nuclear Information System (INIS)

Aravena, Ramon

2001-01-01

The development of urban centers and economical activities, such as agriculture and mining, in Latin America are intimately linked to the availability of water resources. The increasing demand for water and the risks associated to contamination have generated numerous studies related to the evaluation of water resources in this region. In the specific case of groundwater studies, environmental isotopes have played a significant role in these studies ( 18 O, 2 H, 14 C, 13 C). Groundwater provides about 50-60 % of the water resources used in Latin America. Large urban centers such as Lima (Peru), Managua (Nicaragua) and San Jose (Costa Rica) depend mainly on groundwater as a water supply for the population. The agriculture sector is also a major user of groundwater. The Isotope Hydrology Section of the International Atomic Energy Agency based in Vienna has mainly promoted the application of isotope techniques in Latin America. Most of these applications have focussed on the evaluation of the origin and residence time of the groundwater. The groundwater origin is intimately linked to recharge areas whose evaluation is key for the water balance of the aquifer. The evaluation of the groundwater residence time provides information that is relevant for the management of the groundwater system. This presentation will discuss the basic principles of the application of environmental isotopes in hydrology and it will review the current application of isotope techniques in Latin America. Case studies from different Latin American countries will be used to illustrate the main type of application of isotope techniques in groundwater studies in this region (au)

Evaluating origins and water seepage rates at the subdam A of the Dong Mo reservoir using environmental isotope technique

International Nuclear Information System (INIS)

Bui Dac Dung; Trinh Van Giap; Dang Anh Minh; Nguyen Van Hoan

2008-01-01

Environmental isotope techniques have been world-widely used for investigating origins and the rates of the seepage - leakage water at reservoir dams. We have conducted a research on the use of environmental isotope techniques for evaluating the origin of the seepage water and the seepage rate at the sub dam A of the Dong Mo reservoir. The main works were collecting water samples, analyzing for 18 O/ 16 O, 2 H(D)/ 1 H ratios, analyzing for 3 H(T) and chemical contents. Findings of the project showed that: a) Waters at the piezometers on the top and the 1st roof are not originated from lake water; b) Waters at the piezometers on 1st and 2nd levels, as well as seepage waters at the dam toe are mixed of lake and ground waters, and the old river bed could be the channel for ground water upcoming from beneath the dam body; c) The transit times of water from the lake to the observation points are from 3 to 4 months, and the seepage velocity is of about 1.1x10 -3 cm/s; d) The findings from tritium analyses show that all waters around the Dong Mo area are recent waters recharged regularly by meteoric water. (author)

Techniques for preparing isotopic targets

International Nuclear Information System (INIS)

Xu Guoji; Guan Shouren; Luo Xinghua; Sun Shuhua

1987-12-01

The techniques of making isotopic targets for nuclear physics experiments are introduced. Vacuum evaporation, electroplating, centrifugal precipitation, rolling and focused heavy-ion beam sputtering used to prepare various isotopic targets at IAE are described. Reduction-distillation with active metals and electrolytic reduction for converting isotope oxides to metals are mentioned. The stripping processes of producing self-supporting isotopic targets are summarized. The store methods of metallic targets are given

Application of environmental isotopes to groundwater investigations in Qatar

International Nuclear Information System (INIS)

Yurtsever, Y.; Payne, B.R.

1978-01-01

Environmental isotope techniques have been used to study the dynamic behaviour of the groundwater systems in Qatar. The aim was to identify the mixing processes between the shallow phreatic aquifer, the deep confined aquifers and seawater. Environmental tritium was used to estimate the average recharge of the shallow freshwater aquifer. The results of the environmental isotope study, supplemented by hydrochemical data, have clearly indicated that in the south western part of the peninsula the shallow aquifer is in direct hydraulic connection with the deeper artesian aquifers. Furthermore, the poor quality of water in that area is mainly due to substantial upward leakage of water from the deeper aquifers. In some parts of the peninsula seawater was identified as an additional source of salinity. A model was developed for estimating the turnover rate and average recharge of the phreatic aquifer from the tritium data. The results of this model provide an independent estimate of the average annual recharge. (orig.) [de

Application of environmental isotopes to groundwater investigations in Qatar

International Nuclear Information System (INIS)

Yurtsever, Y.; Payne, B.R.

1979-01-01

Environmental isotope techniques have been used to study the dynamic behaviour of the groundwater systems in Qatar. The aim was to identify the mixing processes between the shallow phreatic aquifer, the deep confined aquifers and sea-water. Environmental tritium was used to estimate the average recharge of the shallow fresh-water aquifer. The results of the environmental isotope study, supplemented by hydrochemical data, have clearly indicated that in the southwestern part of the peninsula the shallow aquifer is in direct hydraulic connection with the deeper artesian aquifers. Furthermore, the poor quality of water in that area is mainly due to substantial upward leakage of water from the deeper aquifers. In some parts of the peninsula sea-water was identified as an additional source of salinity. A model was developed for estimating the turnover rate and average recharge of the phreatic aquifer from the tritium data. The results of this model provide an independent estimate of the average annual recharge. (author)

Environmental Monitoring of Agro-Ecosystem Using Environmental Isotope Tracer Technology

International Nuclear Information System (INIS)

Chung, Byung Yeoup; Kim, Jae Sung; Cho, Jae Young

2004-10-01

This report has provided the counterparts the knowledge and skills on the use of environmental isotope tracer technology for obtaining valuable information on agricultural non-point pollution source in agro-ecosystem. The contamination from agricultural watersheds has been brought into attention as a potential contaminant of streams and tributaries, since majority of them caused water quality degradation, eutrophication of reservoir and negative effect on agro-environment. To prevent the contamination from these watersheds, it is necessary to find out the source of the contamination. However, accurate contaminants outflows from various types of non-point sources have not yet been elucidated due to the fact that the extent of non-point source contaminants related to uncontrollable climatic events and irrigation conditions may differ greatly from place to place and year to year. The dominant use of isotopes in environmental ecosystem research in the last few decades has been to trace sources of waters and solutes. The environmental isotope tracer technology using stable isotopes such as oxygen, hydrogen, carbon, nitrogen, and sulfur has extensively been used for tracing the fate of environmental pollutants and for identification of environmental pollutants sources in agro-ecosystems

Application of Isotope techniques in the arid and semi-arid zone hydrology

International Nuclear Information System (INIS)

Gonfiantini, R.; Louvat, D.; Aranyossy, J.F.

1993-01-01

The paper presents a brief introduction on the scientific background of isotope hydrology,and after, explains the applications of environment isotope techniques in groundwater hydrology of the arid and semi-arid zones. It includes the study of aquifer recharge and discharge, identification of palaeorecharge, groundwater movement and age in unconfined and confined aquifers, and interconnections between aquifers. The contribution of isotopes is highlighted with many examples of field case studies, with emphasis on studies carried out with IAEA support. Finally, a short description of IAEA program on isotope hydrology is given, with a list of regional projects supported through the IAEA Technical Cooperation program, and of Coordinated Research Programs. The latter give the modern research trends in isotope application to hydrology and hydrosphere environmental studies. (author). 2 tabs., 25 figs., 69 refs

International conference on isotopic and nuclear analytical techniques for health and environment. Book of abstracts

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

Decision makers and stakeholders are becoming increasingly dependent on reliable chemical measurements that serve as a basis for decisions related to health, consumer safety, commerce, environment protection and compliance to regulations. Several millions of analytical results are produced annually, thus consuming appreciable amounts of resources. Reliability of these data is of major concern if cost-benefit figures are applied. Nuclear and isotopic analytical techniques (NATs) have been supported by the IAEA as part of their mandate to foster the peaceful use of nuclear energy for many years. Nuclear analytical laboratories have been installed and upgraded through Technical Co-operation assistance in many Member State laboratories. These techniques, including INAA, XRF, PIXE, stable and radioisotopes, spectrometroscopy, etc. have been applied to a wide range of subjects with varying success. Nuclear analytical techniques, featuring some intrinsic quality control aspects, such as multi-nuclide analysis, frequently serve as 'reference methods' to cross-check critical results. As nuclear properties of elements are targeted, matrix problems seem to be negligible to a great extent. The International Conference on Isotopic and Nuclear Analytical Techniques for Health and Environment was held 10-13 June 2003 in Vienna, Austria. The main purpose of this Conference was to bring together scientists, technologists, representatives of industry and regulatory authorities to exchange information and review the status of current developments and applications of isotopic and nuclear analytical techniques, and to discuss future trends and developments. A further objective is to identify potential opportunities for developing countries for applying isotopic and nuclear analytical techniques in health and environmental studies, and to consider the promotion and transfer of such technology. International developments and trends in health care, nutrition, and environmental monitoring

Stable lead isotopes in environmental health with emphasis on human investigations

International Nuclear Information System (INIS)

Gulson, Brian

2008-01-01

There has been widespread use of stable lead isotopes in the earth sciences for more than 40 years focussed on the origin and age of rocks and minerals with lesser application in environmental investigations where the emphasis has been directed typically to the source of lead in environmental media such as air, water and soils. In contrast, the number of environmental health investigations focussed on humans (and primates) is limited in spite of the demonstrated utility of the approach in pioneering studies in the early 1970's. This paper reviews the status of lead isotopes in human investigations especially over the past 2 decades, the period over which most activity has taken place. Following a brief introduction to the method, examples are provided illustrating the use of lead isotopes in a wide spectrum of activities including sources and pathways of lead in diverse environments from urban to mining communities, various applications associated with pregnancy, the contribution of bone lead to blood lead including in the elderly, the half-life of lead in blood, and lead in bones and other media. A brief outline of critical research on non-human primates is also given. The lead isotope method is a powerful technique for tracing lead and could be employed more widely in human investigations

Application of environmental isotope tracing technology to geothermal geochemistry

International Nuclear Information System (INIS)

Shang Yingnan

2006-01-01

This paper reviews the recent application and development of environmental isotope tracing technology to geothermal geochemistry in the following aspects: gas isotopes (He, C) tracing of warm springs; H, O isotope tracing on the origin and cause of geothermal water, environmental isotope dating of geothermal water, and the advantage of excess parameter of deuterium (d) in geothermal research. The author also suggests that isotope method should combine with other geological methods to expand its advantage. (authors)

The use of environmental monitoring as a technique to identify isotopic enrichment activities

International Nuclear Information System (INIS)

Buchmann, Jose Henrique

2000-01-01

The use of environmental monitoring as a technique to identify activities related to the nuclear fuel cycle has been proposed, by international organizations, as an additional measure to the safeguards agreements in force. The elements specific for each kind of nuclear activity, or nuclear signatures, inserted in the ecosystem by several transfer paths, can be intercepted with better or worse ability by different live organisms. Depending on the kind of signature of interest, the anthropogenic material identification and quantification require the choice of adequate biologic indicators and, mainly, the use of sophisticated techniques associated with elaborate sample treatments. This work demonstrates the technical viability of using pine needles as bioindicators of nuclear signatures associated with uranium enrichment activities. Additionally, it proposes the use of a technique widely diffused nowadays in the scientific community, the High Resolution Inductively Coupled Plasma Mass Spectrometer (HR-ICP-MS), to identify the signature corresponding to that kind of activities in the ecosystem. It can be also found a description of a methodology recently being applied in analytical chemistry,based on uncertainties estimates metrological concepts, used to calculate the uncertainties associated with the obtained measurement results. Nitric acid solutions with a concentration of 0.3 mol.kg -1 , used to wash pine needles sampled near facilities that manipulate enriched uranium and containing only 0.1 μg.kg -1 of uranium, exhibit a 235 U: 238 U isotopic abundance ratio of 0.0092±0.0002, while solutions originated from samples collected at places located more than 200 km far from activities related to the nuclear fuel cycle exhibit a value of 0.0074±0.0002 for this abundance ratio. Similar results were obtained for samples collected in different places permit to confirm the presence of anthropogenic uranium and demonstrate the viability of using this technique and the

Effects of must concentration techniques on wine isotopic parameters.

Science.gov (United States)

Guyon, Francois; Douet, Christine; Colas, Sebastien; Salagoïty, Marie-Hélène; Medina, Bernard

2006-12-27

Despite the robustness of isotopic methods applied in the field of wine control, isotopic values can be slightly influenced by enological practices. For this reason, must concentration technique effects on wine isotopic parameters were studied. The two studied concentration techniques were reverse osmosis (RO) and high-vacuum evaporation (HVE). Samples (must and extracted water) have been collected in various French vineyards. Musts were microfermented at the laboratory, and isotope parameters were determined on the obtained wine. Deuterium and carbon-13 isotope ratios were studied on distilled ethanol by nuclear magnetic resonance (NMR) and isotope ratio mass spectrometry (IRMS), respectively. The oxygen-18 ratio was determined on extracted and wine water using IRMS apparatus. The study showed that the RO technique has a very low effect on isotopic parameters, indicating that this concentration technique does not create any isotopic fractionation, neither at sugar level nor at water level. The effect is notable for must submitted to HVE concentration: water evaporation leads to a modification of the oxygen-18 ratio of the must and, as a consequence, ethanol deuterium concentration is also modified.

Implementation of isotope correlation technique for safeguards

International Nuclear Information System (INIS)

Persiani, P.J.; Bucher, R.G.

1989-01-01

The isotopic correlation technique (ICT) is based on the fundamental physics principle that the isotopic compositions of nuclear material in the fuel cycle systems contain information regarding the design and history of nuclear material flow from fuel fabrication, reactor operation, and through input to the reprocessing plant. Isotopic Correlation in conjunction with the gravimetric (or Pu/U) method for mass determination can be developed to provide an independent in-field verification of the reprocessing input accountancy at the dissolver and/or accountancy stage of the reprocessing plant. The Argonne National Laboratory program in isotope correlation techniques is based on three-dimensional reactor physics calculations of characteristic geometries/composition in each reactor class. 10 refs., 1 fig., 3 tabs

Applications of stable isotope analysis in foodstuffs surveillance and environmental research

International Nuclear Information System (INIS)

Pichlmayer, F.; Blochberger, F.

1991-12-01

The instrumental coupling of Elemental Analysis and Mass Spectrometry, constituting a convenient tool for isotope ratio measurements of the bioelements in solid or liquid samples is now well established. Advantages of this technique compared with the so far usual wet chemistry sample preparation are: speed of analysis, easy operation and minor sample consumption. The performance of the system is described and some applications are given. Detection of foodstuffs adulterations is mainly based on the natural carbon isotope differences between C 3 - and C 4 -plants. In the field of environmental research the existing small isotopic variations of carbon, nitrogen and sulfur in nature, which depend on substance origin and history, are used as intrinsic signature of the considered sample. Examples of source appointment or exclusion by help of this natural isotopic tracer method are dealt with. (authors)

Research on flow characteristics of deep groundwater by environmental isotopes

Energy Technology Data Exchange (ETDEWEB)

Shimada, Jun; Miyaoka, Kunihide [Tsukuba Univ., Ibaraki (Japan); Sakurai, Hideyuki; Senoo, Muneaki; Kumata, Masahiro; Mukai, Masayuki; Watanabe, Kazuo; Ouchi, Misao

1996-01-01

In this research, as the technique for grasping the behavior of groundwater in deep rock bed which is important as the factor of disturbing the natural barrier in the formation disposal of high level radioactive waste, the method of utilizing the environmental isotopes contained in groundwater as natural tracer was taken up, and by setting up the concrete field of investigation, through the forecast of flow by the two or three dimensional groundwater flow analysis using a computer, the planning and execution of water sampling, the analysis of various environmental isotopes, the interpretation based on those results of measurement and so on, the effectiveness of the investigation technique used was verified, and the real state of the behavior of deep groundwater in the district being studied was clarified. In this research, Imaichi alluvial fan located in northern Kanto plain was taken as the object. In fiscal year 1996, three-dimensional steady state groundwater flow simulation was carried out based on the data related to shallow groundwater and surface water systems, and the places where active groundwater flow is expected were selected, and boring will be carried out there. The analysis model and the results are reported. (K.I.)

Gas chromatography/ion trap mass spectrometry applied for the analysis of triazine herbicides in environmental waters by an isotope dilution technique

International Nuclear Information System (INIS)

Cai Zongwei; Wang Dongli; Ma, W.T.

2004-01-01

A gas chromatography/ion trap mass spectrometry method was developed for the analysis of simazine, atrazine, cyanazine, as well as the degradation products of atrazine, such as deethylatrazine and deisopropylatrazine in environmental water samples. Isotope dilution technique was applied for the quantitative analysis of atrazine in water at low ng/l levels. One liter of water sample spiked with stable isotope internal standard atrazine-d 5 was extracted with a C 18 solid-phase extraction cartridge. The analysis was performed on an ion trap mass spectrometer operated in MS/MS method. The extraction recoveries were in the range of 83-94% for the triazine herbicides in water at the concentrations of 24, 200, and 1000 ng/l, while poor recoveries were obtained for the degradation products of atrazine. The relative standard deviation (R.S.D.) were within the range of 3.2-16.1%. The detection limits of the method were between 0.75 and 12 ng/l when 1 l of water was analyzed. The method was successfully applied to analyze environmental water samples collected from a reservoir and a river in Hong Kong for atrazine detected at concentrations between 3.4 and 26 ng/l

Isotope techniques in water resource investigations in arid and semi-arid regions

International Nuclear Information System (INIS)

2001-03-01

The Co-ordinated Research Project (CRP) on the Use of Isotope Techniques in Water Resources Investigations in Arid and Semi-arid Regions was initiated with the aim od contributing to the assessment of groundwater resources in arid areas through the use of environmental isotope techniques, and thereby to help in better management of these valuable fresh groundwater resources. The main emphases identified were in three key areas: (i) the evaluation of water balance components such as recharge rate estimation and recharge and discharge cycles at different spatial scales, (ii) paleohydrology and hydroclimatic change and, (iii) anthropogenic impacts and the assessment of the vulnerability of arid zone ground waters to salinisation and pollution impacts. This publication presents individual projects carried out within the frameworks of the CRP. Each paper has been indexed separately

Isotope measurement techniques for atmospheric methane

International Nuclear Information System (INIS)

Lowe, D.; White, J.; Levin, I.; Wahlen, M.; Miller, J.B.; Bergamaschi, P.

2002-01-01

Measurement techniques for the carbon isotopic composition of atmospheric methane (δ 13 C) are described in detail as applied in several leading institutions active in this field since many years. The standard techniques with offline sample preparation and subsequent measurement by dual inlet isotope ratio mass spectrometry (IRMS) are compared with continuous flow IRMS. The potential use of infrared absorption spectroscopy is briefly discussed. Details on quality control and calibration are provided. Basic analytical aspects for the measurement of other species, 2 H and 14 C, are also given. (author)

Determination of radium isotopes in environmental samples by gamma spectrometry, liquid scintillation counting and alpha spectrometry: a review of analytical methodology

International Nuclear Information System (INIS)

Jia, Guogang; Jia, Jing

2012-01-01

Radium (Ra) isotopes are important from the viewpoints of radiation protection and environmental protection. Their high toxicity has stimulated the continuing interest in methodology research for determination of Ra isotopes in various media. In this paper, the three most routinely used analytical techniques for Ra isotope determination in biological and environmental samples, i.e. low-background γ-spectrometry, liquid scintillation counting and α-spectrometry, were reviewed, with emphasis on new methodological developments in sample preparation, preconcentration, separation, purification, source preparation and measurement techniques. The accuracy, selectivity, traceability, applicability and minimum detectable activity (MDA) of the three techniques were discussed. It was concluded that the MDA (0.1 mBq L −1 ) of the α-spectrometry technique coupled with chemical separation is about two orders of magnitude lower than that of low-background HPGe γ-spectrometry and LSC techniques. Therefore, when maximum sensitivity is required, the α-spectrometry technique remains the first choice. - Highlights: ► A review is made for determination of Ra isotopes in environmental samples. ► Gamma spectrometry, LSC and a-spectrometry are the main concerned radiometric approach. ► Sample preparation, preconcentration, separation and source preparation are discussed. ► The methods can analyse air, water, seawater, soil, sediment and foodstuffs samples. ► Some new data obtained recently from our laboratory for Ra method study are included.

Isotope techniques for hydrology

Energy Technology Data Exchange (ETDEWEB)

1964-01-01

In the body of the Panel's report specific conclusions and recommendations are presented in the context of each subject. The general consensus of the Panel is as follows: by the study of this report, the 1961 Panel report, the Proceedings of the March 1963 Tokyo Symposium and other reports of research and technological advances, isotope-technique applications to hydrologic problems have provided some useful avenues for understanding the nature of the hydrologic cycle and in the solution of specific engineering problems. Some techniques are developed thoroughly enough for fairly routine application as tools for use in the solution of practical problems, but further research and development is needed on other concepts to determined whether or not they can be beneficially applied to either research or engineering problems. A concerted effort is required on the part of both hydrologists and isotope specialists working as teams to assure that proper synthesis of scientific advances in the respective fields and translation of these advances into practical technology is achieved.

Isotope techniques for hydrology

International Nuclear Information System (INIS)

1964-01-01

In the body of the Panel's report specific conclusions and recommendations are presented in the context of each subject. The general consensus of the Panel is as follows: by the study of this report, the 1961 Panel report, the Proceedings of the March 1963 Tokyo Symposium and other reports of research and technological advances, isotope-technique applications to hydrologic problems have provided some useful avenues for understanding the nature of the hydrologic cycle and in the solution of specific engineering problems. Some techniques are developed thoroughly enough for fairly routine application as tools for use in the solution of practical problems, but further research and development is needed on other concepts to determined whether or not they can be beneficially applied to either research or engineering problems. A concerted effort is required on the part of both hydrologists and isotope specialists working as teams to assure that proper synthesis of scientific advances in the respective fields and translation of these advances into practical technology is achieved

Use of isotope techniques in lake dynamics investigations. Proceedings of a final research co-ordination meeting

International Nuclear Information System (INIS)

2001-03-01

The Co-ordinated Research Programme (CRP) on the Use of Isotope Techniques in Lake Dynamics Investigations was launched with the aim of assessing the potential of environmental isotope techniques in studying the dynamics of surface water bodies and related problems such as: dynamics of solutes; sediment focusing; establishment of water balance components; vulnerability to pollution. The CRP enabled a number of isotope and geochemical studies to be carried out on small and large water bodies, with the general aim of understanding of the dynamics of these systems under the growing anthropogenic influence. This publication is a compilation of the papers presented at the final Research Co-ordination Meeting (RCM) held in Rehovot, Israel, from 10 to 13 March 1997. Individual contributions have been indexed separately

Gaseous isotope correlation technique for safeguards at reprocessing facilities

International Nuclear Information System (INIS)

Ohkubo, Michiaki.

1988-03-01

The isotope correlation technique based on gaseous stable fission products can be used as a means of verifying the input measurement to fuel reprocessing plants. This paper reviews the theoretical background of the gaseous fission product isotope correlation technique. The correlations considered are those between burnup and various isotopic ratios of Kr and Xe nuclides. The feasibility of gaseous ICT application to Pu input accountancy of reprocessing facilities is also discussed. The technique offers the possibility of in situ measurement verification by the inspector. (author). 16 refs, 7 figs

Isotopes in environmental studies - Aquatic Forum 2004. Proceedings of an international conference. Unedited papers

International Nuclear Information System (INIS)

2006-01-01

A better understanding of key processes in the aquatic environment, responsible for its future development and its protection, were at the forefront of the IAEA's International Conference on Isotopes in Environmental Studies - AQUATIC FORUM 2004 convened in Monaco from 25 to 29 October 2004, which was the most important gathering of the year of isotope environmental scientists. Over 320 experts from 60 IAEA Member States and 6 international organizations delivered 185 oral presentations in 6 plenary and 31 parallel sessions and made 130 poster presentations. The conference reviewed the present state of the art isotopic methods for investigation of the aquatic environment. The main conference subjects considered were: (i) behaviour, transport and distribution of isotopes in the aquatic environment; (ii) climate change studies using isotopic records in the marine environment; (iii) groundwater dynamics, modelling and management of freshwater sources; (iv) important global projects, such as WOCE, WOMARS, SHOTS, GEOTRACES; (v) joint IAEA-UNESCO submarine groundwater investigations in the Mediterranean Sea, the Southwest Atlantic and Pacific Oceans; (vi) new trends in radioecological investigations, concentrating on the protection of marine biota against radioactive contamination; (vii) transfers in analytical technologies from bulk analyses to particle and compound specific analyses of environmental samples; (viii) development of new isotopic techniques, such as AMS and ICPMS, and their successful applications in environmental studies; and many other exciting topics which were presented and discussed during the Conference. Four workshops were held simultaneously: - ATOMS-Med Workshop - development of a project proposal for oceanographic investigations in the Eastern Mediterranean. - El Nino - Research Co-ordination Meeting of the new IAEA Coordinated Research Project investigating climate change using isotopic records in the marine environment. - CELLAR Workshop

Nuclear material safeguards surveillance and accountancy by isotope correlation techniques

International Nuclear Information System (INIS)

Persiani, P.J.; Goleb, J.A.

1981-01-01

This paper presents the initial phase of the US study program and involves the computation of isotopic correlations for the LMFBR fuel cycle. The LWR fuel cycle phase of the study is currently in progress. The selection of the more safeguards effective functionals will depend not only on the level of reliability of isotope correlation technique (ICT) for verification, but also on the capability and difficulty of developing measurement methods. Performance characteristics of existing and proposed isotopic measurement techniques cover the general areas including assay and isotopic wet chemistry and NDA: (1) simultaneous multicomponent analysis techniques, (2) mass spectrometry, (3) x-ray fluorescence or densitometry with high flux monochromatic x-ray sources and high dispersion spectrometers, (4) passive and active neutron interrogation, (5) high level gamma-ray spectroscopy, (6) coulometry, and (7) potentiometry. The measurement capabilities and inherent limitations of these systems are to be evaluated in terms of total systems, operational mode, sample preparation requirements and consequent effect on dissolver solution representation, accuracy and precision estimates (if available), development status of the technique, and development requirements. The isotopic correlation technique shows considerable promise for use in verifying the initial isotopic composition and burnup of discharged assemblies based on the measured ratios of several key isotopes, obtained probably at the dissolver stage in reprocessing. This technique should, for example, easily be capable of indicating the exchange of a blanket assembly for a fuel assembly

Isotope correlation and mass spectrometry techniques for irradiated fuel assay

International Nuclear Information System (INIS)

Deron, S.

1985-01-01

This paper outlines the methods used to account for fissionable materials in irradiated nuclear fuel elements entering reprocessing plants. Verification is accomplished at three mass balance stations in the plant. Techniques employed fall into two categories: isotopic and isotope dilution analyses by mass spectometry and isotope correlation techniques. These methods are discussed in some detail

Application Of Nuclear Techniques In Environmental Studies And Pollution Control

Energy Technology Data Exchange (ETDEWEB)

EI-Motaium, R A [Plant Research Department, Nuclear Research Ceter, Atomic Energy Authority, Inshas P.O. Box 13759, Cairo (Egypt)

2007-07-01

Environmental pollution has become a world wide concern. One of the main sources of such pollution is sewage wastewater and sludge. Their utilization without proper treatment can pollute the ecosystem (plant, soil, surface and ground water). Sewage wastewater and sludge contains several pollutants such as: pathogens, toxic organic compounds, heavy metals, high level of BOD and COD, seed weed. The reuse of sewage water and sludge in agriculture can lead to the transfer of some of these pollutants into the food chain causing health hazard. In addition, most of these contaminants are not biodegradable, becoming dangerous to plant and human health. Nuclear techniques has recently been used to control environmental pollution. Ionizing radiation provide a fast and reliable means of sewage water and sludge treatment than the conventional methods. Gamma radiation ( {sup 60}Co) and electron beam (accelerator) has been successfully used for alleviation of environmental pollution. Such alleviation includes: disinfection of harmful pathogens, degradation of toxic organic pollutants, destruction of seed weed and reduction of soluble heavy metals, odor and BOD and COD. The use of radioactive and stable isotopes are a useful tools to investigate the contribution of sludge nutrients to plant nutrition. Nitrogen, using {sup 15}N-ammonium sulfate, uptake and translocation by plant from soil amended with sewage sludge was studied under field condition. The contribution of sludge to phosphorus nutrition of plants was quantified using {sup 32}p as tracer. In both cases the principal of isotopic dilution technique was applied. The information generated from these experiments could help preserve the environment. It could help optimize the application rate of sludge to meet plant requirements while avoiding the accumulation of N and P in the soil or leaching to the aquifer. Isotope exchange kinetic technique is used to evaluate nutrients availability from sludge. Neutron moisture meter is

Application Of Nuclear Techniques In Environmental Studies And Pollution Control

International Nuclear Information System (INIS)

EI-Motaium, R.A.

2007-01-01

Environmental pollution has become a world wide concern. One of the main sources of such pollution is sewage wastewater and sludge. Their utilization without proper treatment can pollute the ecosystem (plant, soil, surface and ground water). Sewage wastewater and sludge contains several pollutants such as: pathogens, toxic organic compounds, heavy metals, high level of BOD and COD, seed weed. The reuse of sewage water and sludge in agriculture can lead to the transfer of some of these pollutants into the food chain causing health hazard. In addition, most of these contaminants are not biodegradable, becoming dangerous to plant and human health. Nuclear techniques has recently been used to control environmental pollution. Ionizing radiation provide a fast and reliable means of sewage water and sludge treatment than the conventional methods. Gamma radiation ( 60 Co) and electron beam (accelerator) has been successfully used for alleviation of environmental pollution. Such alleviation includes: disinfection of harmful pathogens, degradation of toxic organic pollutants, destruction of seed weed and reduction of soluble heavy metals, odor and BOD and COD. The use of radioactive and stable isotopes are a useful tools to investigate the contribution of sludge nutrients to plant nutrition. Nitrogen, using 15 N-ammonium sulfate, uptake and translocation by plant from soil amended with sewage sludge was studied under field condition. The contribution of sludge to phosphorus nutrition of plants was quantified using 32 p as tracer. In both cases the principal of isotopic dilution technique was applied. The information generated from these experiments could help preserve the environment. It could help optimize the application rate of sludge to meet plant requirements while avoiding the accumulation of N and P in the soil or leaching to the aquifer. Isotope exchange kinetic technique is used to evaluate nutrients availability from sludge. Neutron moisture meter is used to

Medical Isotopes Production Project: Molybdenum-99 and related isotopes: Environmental Impact Statement, Volume I

International Nuclear Information System (INIS)

1996-04-01

This Environmental Impact Statement (EIS) provides environmental and technical information concerning the U.S. Department of Energy's (DOE) proposal to establish a domestic source to produce molybdenum-99 (Mo-99) and related medical isotopes (iodine-131, xenon-133 and iodine-125). Mo-99, a radioactive isotope of the element molybdenum, decays to form metastable technetium-99 (Tc-99m), a radioactive isotope used thousands of times daily in medical diagnostic procedures in the U.S. Currently, all Mo-99 used in the U.S. is obtained from a single Canadian source. DOE is pursuing the Medical Isotopes Production Project in order to ensure that a reliable supply of Mo-99 is available to the U.S. medical community. Under DOE's preferred alternative, the Chemistry and Metallurgy Research Facility at the Los Alamos National Laboratory (LANL) and the Annular Core Research Reactor and Hot Cell Facility at Sandia National Laboratories/New Mexico (SNL/NM) would be used for production of the medical isotopes. In addition to the preferred alternative, three other reasonable alternatives and a no action alternative are analyzed in detail. The sites for the three reasonable alternatives are LANL, Oak Ridge National Laboratory (ORNL), and Idaho National Engineering Laboratory (INEL). The analyses in this EIS indicate no significant difference in the potential environmental impacts among the alternatives. Each of the alternatives would use essentially the same technology for the production of the medical isotopes. Minor differences in environmental impacts among alternatives relate to the extent of activity necessary to modify and restart (as necessary) existing reactors and hot cell facilities at each of the sites, the quantities, of low-level radioactive waste generated, how such waste would be managed, and the length of time needed for initial and full production capacity

Environmental Development Plan for advanced isotope separation

International Nuclear Information System (INIS)

1979-05-01

This EDP identifies the planning and management requirements and schedules needed to evaluate and assess the environmental, health, and safety aspects of the Advanced Isotope Separation (AIS) program. Current AIS processes include the molecular and atomic vapor laser processes and the plasma process. This document covers the technology program, environmental concerns and requirements, and environmental strategy

International conference on isotopic and nuclear analytical techniques for health and environment. Unedited papers

International Nuclear Information System (INIS)

2004-01-01

The IAEA has been supporting nuclear and isotopic analytical techniques as part of its mandate to foster the peaceful uses of nuclear energy for many years. Nuclear analytical laboratories have been installed and upgraded through technical co-operation assistance in many laboratories of Member States. These techniques, including INAA, CRF, PIXE, stable isotopes and radioisotopes, α, β, γ spectrometry, Moessbauer spectrometry, etc., have been applied to a wide range of subjects with varying success. Nuclear analytical techniques, featuring some intrinsic quality control aspects, such as multi-nuclide analysis, frequently serve as 'reference methods' to crosscheck critical results. As nuclear properties of elements are targeted, matrix problems seem to be negligible. In light of its continued commitment and support, the IAEA organized the International Conference on Isotopic and Nuclear Analytical Techniques for Health and Environment. Out of 220 from 61 countries who applied for participation, 155 official participants and five observers from 47 countries were in attendance, with 67 from 32 developing countries and 21 from international organizations, including the World Health Organization. Eleven plenary sessions were held. Also conducted was a panel discussion on Human Capacity Development Needs in the Areas of Analytical Quality Control Services (AQCS), Radiochemistry and Nutrition. The scientific sessions were divided into several topics, which reflect some of the important activities of the IAEA's Department of Nuclear Sciences and Applications (NA): - Isotopic and nuclear techniques (general); - Metrology and quality assurance in nuclear measurements; - Nuclear analytical techniques for environmental monitoring; - Radioecology; - Environmental monitoring; - Radiological safety of food and water; - Methodological aspects of stable isotope techniques in health and environment; - Applications of isotopic techniques in health and environment; - New

Use of environmental isotopes in arid zone hydrology

International Nuclear Information System (INIS)

Dincer, T.

1980-01-01

After aridity is defined some physical and hydrologic features common in arid lands are described. An attempt has been made to identify various groundwater recharge mechanisms in arid countries and to assess their relative importance. The influence of the arid climates on the isotopic composition of the precipitation is discussed. The use of environmental isotopes in run-off and precipitation infiltration and recharge is evaluated, and the importance of isotopic studies in investigating interrelations between aquifers is stressed. Finally, some examples of isotope applications in surface water and its relation to groundwater are given. (author)

Enantioselective stable isotope analysis (ESIA) — A new concept to evaluate the environmental fate of chiral organic contaminants

International Nuclear Information System (INIS)

Badea, Silviu-Laurentiu; Danet, Andrei-Florin

2015-01-01

Since 2011, the enantiospecific stable carbon isotope analysis (ESIA) has emerged as an innovative technique to assess the environmental fate of chiral emerging compounds by combining in one experimental technique both compound specific isotope analysis (CSIA) and enantioselective analysis. To date, the ESIA was applied for four classes of compounds: α-hexachlorocyclohexane (α-HCH), polar herbicides (phenoxy acids), synthetic polycyclic musk galaxolide (HHCB), and phenoxyalkanoic methyl herbicides. From an analytical point of view there are factors that are hindering the application of ESIA methods for the field samples: (i.e. amounts of target analyte, matrix effects, GC resolution) and overcoming these factors is challenging. While ESIA was shown as a mature technique for the first three abovementioned class of compounds, no isotope analysis of individual enantiomers could be performed for phenoxyalkanoic methyl herbicides. With respect to field studies, one study showed that ESIA might be a promising tool to distinguish between biotic and abiotic transformation pathways of chiral organic contaminants and even to differentiate between their aerobic and anaerobic biotransformation pathways. The development of ESIA methods for new chiral emerging contaminants in combination with development of multi-element isotope analysis will contribute to a better characterization of transformation pathways of chiral organic contaminants. - Highlights: • ESIA is an innovative technique to assess the environmental fate of chiral pollutants • Overcoming the analytical limitations of ESIA is challenging • Development of ESIA methods for new chiral emerging contaminants is needed

Enantioselective stable isotope analysis (ESIA) — A new concept to evaluate the environmental fate of chiral organic contaminants

Energy Technology Data Exchange (ETDEWEB)

Badea, Silviu-Laurentiu, E-mail: badeasilviu@gmail.com [Department of Chemistry, Umeå University, SE-901 87 Umeå (Sweden); Danet, Andrei-Florin [Department of Analytical Chemistry, University of Bucharest, Faculty of Chemistry, 90-92 Panduri Str., Bucharest 050657 (Romania)

2015-05-01

Since 2011, the enantiospecific stable carbon isotope analysis (ESIA) has emerged as an innovative technique to assess the environmental fate of chiral emerging compounds by combining in one experimental technique both compound specific isotope analysis (CSIA) and enantioselective analysis. To date, the ESIA was applied for four classes of compounds: α-hexachlorocyclohexane (α-HCH), polar herbicides (phenoxy acids), synthetic polycyclic musk galaxolide (HHCB), and phenoxyalkanoic methyl herbicides. From an analytical point of view there are factors that are hindering the application of ESIA methods for the field samples: (i.e. amounts of target analyte, matrix effects, GC resolution) and overcoming these factors is challenging. While ESIA was shown as a mature technique for the first three abovementioned class of compounds, no isotope analysis of individual enantiomers could be performed for phenoxyalkanoic methyl herbicides. With respect to field studies, one study showed that ESIA might be a promising tool to distinguish between biotic and abiotic transformation pathways of chiral organic contaminants and even to differentiate between their aerobic and anaerobic biotransformation pathways. The development of ESIA methods for new chiral emerging contaminants in combination with development of multi-element isotope analysis will contribute to a better characterization of transformation pathways of chiral organic contaminants. - Highlights: • ESIA is an innovative technique to assess the environmental fate of chiral pollutants • Overcoming the analytical limitations of ESIA is challenging • Development of ESIA methods for new chiral emerging contaminants is needed.

Environmental isotope observations on Sishen ground waters

International Nuclear Information System (INIS)

Verhagen, B. Th.

1982-01-01

Environmental isotope measurements have been conducted on the outputs of some of the main dewatering points in both north and south mining areas as well as on numerous other observation points in the Sishen compartment. The effect of the dykes bounding the compartment could be observed from the behaviour of the isotopic composition of ground waters in the conduit zone. Measurements were done on radiocarbon, tritium oxygen-18 and carbon-13

Application of environmental isotope techniques to selected hydrological systems in Pampean, Argentina

International Nuclear Information System (INIS)

Dapena, C.; Panarello, H.O.

2007-01-01

The isotopic composition of precipitation in Buenos Aires station is of great importance to understand the Pampean hydrological Systems. The rain isotope content ( 2 H, 18 O and 3 H) is being recorded since 1978 at Ciudad Universitaria Station, belonging to the Red Nacional de Colectores constitutes the main recharge factor for most of local and regional hydrologic system. The knowledge and characterization of their isotope content is of fundamental importance for a hydrological investigation, so we need a historical updated record. For this reason the International Atomic Energy Agency (IAEA) in co-operation with the World Meteorological Organization (WMO) developed an international network devoted to the measurement of isotope contents in precipitation named as GNIP (Global Network for Isotopes in Precipitation) which started in 1960. The main objective of the network is to evaluate on a global scale the spatial and temporal distribution of isotope contents in precipitation and their dependence to relevant meteorological parameters. In this framework, the 'Instituto de Geocronologia y Geologia Isotopica' (INGEIS) established a National Collector Network for Isotopes in Precipitation (RNC) which integrates with the GNIP. The operation of the network in Argentina began in November 1978 with one station located in Buenos Aires City. At present, INGEIS is operating 17 stations at different altitudes and latitudes, covering a wide range of temperatures and a large variety of climates. This information allows us to know the input functions (rain isotope content) at different regions of the country. Signatures of isotopes in precipitation are not static. They respond to both, synoptic and climatology and global climate change. Attracted by this issue, a new community, interested in palaeoclimate and atmospheric circulation modelling, started to use the GNIP data. However, it becomes apparent soon that the collected data were also useful in other water-related fields

General physical fundamentals of isotope hydrology

International Nuclear Information System (INIS)

Moser, H.; Rauert, W.

1976-01-01

A description is given of the measurement and measuring units of stable isotopes, the physical properties, measurement and measuring units of radioactive isotopes, the fundamentals of the tracer technique, the environmental isotope distribution in the hydrosphere and the radiation protection in isotope hydrological investigations. (HK) [de

Sectoral programming mission isotope techniques for geothermal development. Philippines. UNDP sectoral support

International Nuclear Information System (INIS)

Froehlich, K.; Sun, Y.

1995-10-01

This report discusses the accomplishments of IAEA Technical Cooperation project PHI/8/016 ''Isotope Techniques in Geothermal Hydrology''. It is intended to help Philippine National Oil Company's Energy Development Corporation (PNOC-EDC) in use of isotope techniques for geothermal development. This report discusses outcomes of the mission, conclusions and recommendations on applications of isotopes techniques in geothermal agro-industrial plants and geothermal hydrology

Teams explore water supplies in Latin America: Interest raised in isotope techniques

International Nuclear Information System (INIS)

Gonfiantini, R.

1984-01-01

Latin American countries are particularly interested in applying isotope techniques in hydrology and other fields of earth sciences. Ten research contracts already have been awarded under the IAEA's Co-ordinated Research Programme on the Application of Isotope Techniques in Hydrology in the Latin American Region. In July 1984, IAEA and UNESCO sponsored a regional seminar for Latin America on the use of isotope techniques in water resources management in Buenos Aires

Fractionation of oxygen isotopes between mammalian bone-phosphate and environmental drinking water

International Nuclear Information System (INIS)

Luz, B.; Kolodny, V.; Horowitz, M.

1984-01-01

The delta 18 O of mammalian bone-phosphate varies linearly with delta 18 O of environmental water, but is not in isotopic equilibrium with that water. This situation is explained by a model of delta 18 O in body water in which the important fluxes of exchangeable oxygen through the body are taken into account. Fractionation of oxygen isotopes between body and environmental drinking water is dependent on the rates of drinking and respiration. Isotopic fractionation can be estimated from physiological data and the estimates correlate very well with observed fractionation. Species whose water consumption is large relative to its energy expenditure is sensitive to isotopic ratio changes in environmental water. (author)

Medical Isotopes Production Project: Molybdenum-99 and related isotopes - environmental impact statement. Volume II, comment response document

International Nuclear Information System (INIS)

1996-04-01

This Environmental Impact Statement (EIS) provides environmental and technical information concerning the U.S. Department of Energy's (DOE) proposal to establish a domestic source to produce molybdenum-99 (Mo-99) and related isotopes (iodine-131, xenon-133, and iodine-125). Mo-99, a radioactive isotope of the element molybdenum, decays to form metastable technetium-99 (Tc-99m), a radioactive isotope used thousands of times daily in medical diagnostic procedures in the U.S. Currently, all Mo-99 used in the U.S. is obtained from a single Canadian source. DOE is pursuing the Medical Isotopes Production Project in order to ensure that a reliable supply of Mo-99 is available to the U.S. medical community as soon as practicable. Under DOE's preferred alternative, the Chemistry and Metallurgy Research Facility at the Los Alamos National Laboratory (LANL) and the Annular Core Research Reactor and Hot Cell Facility at Sandia National Laboratories/New Mexico (SNL/NM) would be used for production of the medical isotopes. In addition, three other reasonable alternatives and a No Action alternative are analyzed in detail, The sites for these three reasonable alternatives are LANL, Oak Ridge National Laboratory (ORNL), and Idaho National Engineering Laboratory (INEL). The analyses in this EIS indicate no significant difference in the potential environmental impacts among the alternatives. Each of the alternatives would use essentially the same technology for the production of the medical isotopes. Minor differences in environmental impacts among alternatives relate to the extent of activity necessary to modify and restart (as necessary) existing reactors and hot cell facilities at each of the sites, the quantities of low-level radioactive waste generated, how such waste would be managed, and the length of time needed for initial and full production capacity. This document contains comments recieved from meetings held regarding the site selection for isotope production

Natural isotope technique for the exploration and exploitation of ground water

International Nuclear Information System (INIS)

Zainal Abidin; Hudi Hastowo; Aang Hanafiah

2007-01-01

In line with the condition of climate and hydrology, Indonesia has a fast amount of aquifers which are sources of ground water. In several areas large number of springs occurred with small to large debits which is a sign of ground water potential. Ground water is a potential reservoir to be use at maximum for several purposes such as drinking water, industry and tourism. Large cities such as Jakarta, Bandung and others depend on ground water for their industries and hotels. The exploitation of ground water use has to be controlled and monitoring of a management system have to be done. Research carried out only on the exploitation of geophysics and hydrology showed that the amount of ground water reservoirs is not enough to be used when it comes to justification to explore it. Other parameters are still be needed which are the origins and dating of the ground water, these last two factors mentioned have to be taken into consideration in the system of conversion and balance of water. An alternative technology to determine the two factors mentioned in a short time is the natural isotope technique of 18 O, 2 H and 14 C. This technique is used to determine the origin of water, and isotope 14 C is carried out to determine the age of ground water. Isotopes 18 H and 2 H are stable isotopes in the form of water and is integrated in the hydrological cycle. Their specific concentrations in rain water at several elevations are used as fingerprints to locate the area of ground water supplement and its origin. Isotope 14 C is a natural radioactive isotope with a half-life of 5.730 years and is found in the hydrology cycle and enters the ground water system through CO 2 gas which is dissolved in water. 14 C isotope could determine the age of ground water and is also able to indicate the potential/amount of ground water. Studies of exploration and exploration monitoring of ground water should be an integrated study by geohydrology, geophysics and isotope and could be a solution of

Soil organic matter (SOM) dynamics determined by stable isotope techniques

International Nuclear Information System (INIS)

Gerzabek, M. H.

1998-09-01

Being aware of limitations and possible bias the 13 C natural abundance technique using the different 13 C enrichments in plants with differing photosynthetic pathways in a powerful tool to quantify turnover processes, both in long-term field studies and short-term laboratory experiments. Special care is needed in choosing reference plots and the proper number of replicate samples. The combination of 13 C and 14 C measurements has a high potential for a further improvement of isotope techniques in SOM studies. Natural abundance of 15 N is less powerful with respect to quantification of SOM processes than the isotope dilution technique. However its usefulness could be distinctly improved by introducing other stable isotopes into the studies.(author)

The role and future of in-vitro isotopic techniques in molecular biology

International Nuclear Information System (INIS)

Dar, L.; Khan, B.K.

2004-01-01

In this review we discuss isotopic in-vitro molecular biology techniques, and their advantages and applications. Isotopic methods have helped to shape molecular biology since its early days. Despite the availability of non-isotopic alternatives, isotopic methods continue to be used in molecular biology due to certain advantages, especially related to sensitivity and cost-effectiveness. Numerous techniques involving the use of isotopes help in the characterization of genes, including the detection of single nucleotide polymorphisms (SNPs) or mutations. Other isotopic molecular methods are utilized to study the phenotypic expression of gene sequences and their mutation. Emerging branches of molecular biology like functional genomics and proteomics are extremely important for exploiting the rapidly growing data derived from whole genomic sequencing of human and microbial genomes. Recent molecular biology applications like the high-throughput array techniques are relevant in the context of both structural and functional genomics. In proteomics, stable isotope based technology has found applications in the analysis of protein structure and interactions. (author)

Isotope dilution analysis of environmental samples

International Nuclear Information System (INIS)

Tolgyessy, J.; Lesny, J.; Korenova, Z.; Klas, J.; Klehr, E.H.

1986-01-01

Isotope dilution analysis has been used for the determination of several trace elements - especially metals - in a variety of environmental samples, including aerosols, water, soils, biological materials and geological materials. Variations of the basic concept include classical IDA, substoichiometric IDA, and more recently, sub-superequivalence IDA. Each variation has its advantages and limitations. A periodic chart has been used to identify those elements which have been measured in environmental samples using one or more of these methods. (author)

Fuel reprocessing data validation using the isotope correlation technique

International Nuclear Information System (INIS)

Persiani, P.J.; Bucher, R.G.; Pond, R.B.; Cornella, R.J.

1990-01-01

The Isotope Correlation Technique (ICT), in conjunction with the gravimetric (Pu/U ratio) method for mass determination, provides an independent verification of the input accountancy at the dissolver or accountancy stage of the reprocessing plant. The Isotope Correlation Technique has been applied to many classes of domestic and international reactor systems (light-water, heavy-water, and graphite reactors) operating in a variety of modes (power, research, and production reactors), and for a variety of reprocessing fuel cycle management strategies. Analysis of reprocessing operations data based on isotopic correlations derived for assemblies in a PWR environment and fuel management scheme, yielded differences between the measurement-derived and ICT-derived plutonium mass determinations of (- 0.02 ± 0.23)% for the measured U-235 and (+ 0.50 ± 0.31)% for the measured Pu-239, for a core campaign. The ICT analyses has been implemented for the plutonium isotopics in a depleted uranium assembly in a heavy-water, enriched uranium system and for the uranium isotopes in the fuel assemblies in light-water, highly-enriched systems

isotopic characteristics of aquifers in sinai

International Nuclear Information System (INIS)

Al-Gamal, S.A.

2004-01-01

the environmental isotopes data (expressed as δ 2 d and δ 18 O) of different aquifers in sinai were treated using correlation and regression techniques. whereas, rain water isotopic data were treated using empirical orthogonal functions (EOF) techniques. environmental isotopes for different aquifers expressed in terms of O-18 and H-2, were taken to represent the isotopic characteristics. regression equations using the highly correlated variables of δ 2 d and δ 18 O were constructed for each aquifer. the latitudinal variations (of rainwater in sinai and selected climatic stations east mediterranean ) versus rainwater isotopic compositions were analyzed using the normalized variables. it was found that the latitudinal variations of the rainwater isotopic compositions ( δ 2 D, δ 18 O), vapor pressure, and surface temperature occurred in parallel and decreased with latitude. in the east mediterranean, empirical linear relationship between altitude and δ 2 D has indicted that the rate of change of δ 2 D with height is comparable with the dry lapse rate in the atmosphere.The obtained regression equations of environmental isotopes data have impacted on different slopes and different constants expressing the non-homogeneity in the isotopic composition of rainwater recharging the aquifers of sinai , due to the presence of different air masses

Environmental isotope hydrology laboratories in developing countries

International Nuclear Information System (INIS)

Gonfiantini, R.; Stichler, W.

1991-01-01

This article reports on the role, experience, and problems of environmental isotope hydrology laboratories in developing countries, based upon the IAEA's experience. It specifically offers guidance on important aspects of organization, staffing, and operation

Environmental isotope and geophysical techniques to identify groundwater potential zones in drought prone areas of Amravati District, Maharashtra, India

International Nuclear Information System (INIS)

Jacob, Noble

2017-01-01

The groundwater potential of Anjangaon village in Amaravati district of Maharashtra is generally poor and the water quality is saline in most of the places. Farmers dig open wells (up to 30 m depth) and drill bore wells (100-150 m depth) for domestic and irrigation purposes. Most of the wells failed and farmers are struggling for fresh water in this region. To evaluate the groundwater recharge and to identify the groundwater potential zones an environmental isotope and geophysical study was carried out. Water samples were collected from rain, springs, open wells, bore wells and detention tanks and measured for environmental isotopes such as "1"8O, "2H and "3H. Isotope results indicate that the groundwater is getting modern component of recharge from the rain as well as from the detention tanks. The percentage contributions from the detention tanks were estimated to be about 40 to 90 %. In the southern part of the Anjagaon village, an electrical resistivity survey of the geological formation was carried out and a groundwater potential zone was delineated at 45m depth. The farmers were asked to drill bore wells at the identified depth. The drilled five bore wells yielded perennial source of good quality water

Measurement of environmental tritium for isotope hydrology studies

International Nuclear Information System (INIS)

1973-01-01

The Section of Isotope Hydrology of the IAEA Division of Research and Laboratories gains valuable hydrological information from studies of the concentration of environmental tritium in precipitation, surface and groundwater samples from various sites around the world. This photo story shows the steps in the measurement of these very low levels of tritium in water as performed in the Isotope Hydrology Laboratory of the Agency. (author)

Industrial scale production of stable isotopes employing the technique of plasma separation

International Nuclear Information System (INIS)

Stevenson, N.R.; Bigelow, T.S.; Tarallo, F.J.

2003-01-01

Calutrons, centrifuges, diffusion and distillation processes are some of the devices and techniques that have been employed to produce substantial quantities of enriched stable isotopes. Nevertheless, the availability of enriched isotopes in sufficient quantities for industrial applications remains very restricted. Industries such as those involved with medicine, semiconductors, nuclear fuel, propulsion, and national defense have identified the potential need for various enriched isotopes in large quantities. Economically producing most enriched (non-gaseous) isotopes in sufficient quantities has so far eluded commercial producers. The plasma separation process is a commercial technique now available for producing large quantities of a wide range of enriched isotopes. Until recently, this technique has mainly been explored with small-scale ('proof-of-principle') devices that have been built and operated at research institutes. The new Theragenics TM facility at Oak Ridge, TN houses the only existing commercial scale PSP system. This device, which successfully operated in the 1980's, has recently been re-commissioned and is planned to be used to produce a variety of isotopes. Progress and the capabilities of this device and it's potential for impacting the world's supply of stable isotopes in the future is summarized. This technique now holds promise of being able to open the door to allowing new and exciting applications of these isotopes in the future. (author)

Applications of C and N stable isotopes to ecological and environmental studies in seagrass ecosystems

Energy Technology Data Exchange (ETDEWEB)

Lepoint, Gilles [Centre MARE, Laboratoire d' Oceanologie, Institut de Chimie, B6, Universite de Liege, B-4000 Liege (Belgium)]. E-mail: g.lepoint@ulg.ac.be; Dauby, Patrick [Centre MARE, Laboratoire d' Oceanologie, Institut de Chimie, B6, Universite de Liege, B-4000 Liege (Belgium); Institut Royal des Sciences Naturelles de Belgique, rue Vautier, B1000 Brussels (Belgium); Gobert, Sylvie [Centre MARE, Laboratoire d' Oceanologie, Institut de Chimie, B6, Universite de Liege, B-4000 Liege (Belgium)

2004-12-01

Stable isotopes of carbon and nitrogen are increasingly used in marine ecosystems, for ecological and environmental studies. Here, we examine some applications of stable isotopes as ecological integrators or tracers in seagrass ecosystem studies. We focus on both the use of natural isotope abundance as food web integrators or environmental tracers and on the use of stable isotopes as experimental tools. As ecosystem integrators, stable isotopes have helped to elucidate the general structure of trophic webs in temperate, Mediterranean and tropical seagrass ecosystems. As environmental tracers, stable isotopes have proven their utility in sewage impact measuring and mapping. However, to make such environmental studies more comprehensible, future works on understanding of basic reasons for variations of N and C stable isotopes in seagrasses should be encouraged. At least, as experimental tracers, stable isotopes allow the study of many aspects of N and C cycles at the scale of a plant or at the scale of the seagrass ecosystem.

Application of radiation and isotopes for a better environment

International Nuclear Information System (INIS)

Danesi, P.R.

2000-01-01

The IAEA, working with governments and international bodies, is promoting the use of radiation technology and isotopes (nuclear techniques) in devising and implementing strategies for environmental sustainability. The number of nuclear techniques which can contribute to a better environment is very large. For practical purpose they can be schematically grouped into three categories, i.e. a) techniques for monitoring and assessing environmental pollution, b) techniques for reducing the environmental impact of increased productivity, c) techniques for the development of new resources in a more environmentally friendly manner. Examples in category a) are: the analysis of non-radioactive and radioactive pollutants, tracer techniques for pollutant transport studies, trace techniques for monitoring pesticide residues in food and the environment, climatic studies thorough isotopes in precipitation. Examples in category b) are: electron beam processing of combustion flue gases, the sterile insect technique for insect pest eradication and control, nitrogen fixation in crops and trees to optimise fertiliser use and combat desertification, tracer techniques for optimising fertiliser use, nuclear techniques for improving water management practices and reduce pollution of fresh water. Examples in category c) are : isotopes for studying the origin and flow of water, radiation mutation in plants for obtain crops with better agronomic characteristics including resistance to diseases. In this work examples and practical achievements of the most significant techniques and technologies for the improvement of the environment based on the use of radiation and isotopes are presented. (author)

Development of environmental sample analysis techniques for safeguards

International Nuclear Information System (INIS)

Magara, Masaaki; Hanzawa, Yukiko; Esaka, Fumitaka

1999-01-01

JAERI has been developing environmental sample analysis techniques for safeguards and preparing a clean chemistry laboratory with clean rooms. Methods to be developed are a bulk analysis and a particle analysis. In the bulk analysis, Inductively-Coupled Plasma Mass Spectrometer or Thermal Ionization Mass Spectrometer are used to measure nuclear materials after chemical treatment of sample. In the particle analysis, Electron Probe Micro Analyzer and Secondary Ion Mass Spectrometer are used for elemental analysis and isotopic analysis, respectively. The design of the clean chemistry laboratory has been carried out and construction will be completed by the end of March, 2001. (author)

Stable isotope measurement techniques for atmospheric greenhouse gases

International Nuclear Information System (INIS)

2002-01-01

The technical requirements to perform useful measurements of atmospheric greenhouse gas concentrations and of their isotope ratios are of direct relevance for all laboratories engaged in this field. A meaningful interpretation of isotopes in global models on sources and sinks of CO 2 and other greenhouse gases depends on strict laboratory protocols and data quality control measures ensuring comparable data in time and space. Only with this precondition met, the isotope techniques can serve as a potentially powerful method for reducing uncertainties in the global CO 2 budgets and for tracing pathways and interaction of terrestrial, oceanic, and atmospheric pools of carbon. This publication provides four contributions describing methods for the determination of the isotopic composition of trace gases in atmospheric air and in ice cores. These contributions have been indexed separately

Use of isotopic tracers in pesticide and environmental contamination research

International Nuclear Information System (INIS)

Casida, J.E.

1976-01-01

The era of synthetic organic pesticides, starting with DDT and the herbicide 2,4-D about 1940, coincides with that of rapid advances in radiotracer applications. This is indeed fortunate since isotopic experiments are an essential step in evaluating each new pesticide and in continually reassessing older compounds for safety and most efficient utilization. This research is carried out in all developed nations with important supplementation on local problems or use conditions from investigations in the developing countries. Several slides will help illustrate the sequence of studies for establishing the disposition and fate of pesticides and other environmental contaminants.It is clear that very little of the pesticide ever contacts the pest. Pesticide chemicals are generally applied at dosages of 0.2 to 2 kilogram per hectare from one to five or more times per crop season. Less than 0.01% of an insecticide is absorbed or ingested by the pest insect. The remaining amount, more than 99.99%, is an environmental contaminant, a portion of which is a potential residue in food, feed and fibre. Isotopic research is critical in understanding or solving several aspects of the problem. The isotopic label is introduced into the chemical by synthesis in a commercial or university laboratory or in a national or regional atomic research centre. The most common radioisotopes used are tritium, 14carbon, 32phosphorus, 35sulphur and 36chlorine. Stable isotopes are becoming increasingly important in pesticide research, particularly carbon 13, nitrogen 15 and oxygen 18. The initial studies usually involve administration of the 14 carbon-labelled pesticide to rats, which are then held in metabolism cages that allow separate collection of expired gases, urine and faeces. The products in the excreta are identified by various chromatographic and spectroscopic techniques. The persistence of the chemical and its metabolites in various tissues is also determined to make sure that the material

Developing isotope techniques for water exploration in the Sahel

International Nuclear Information System (INIS)

Aranyossy, J.F.; Louvat, D.; Maksoudi, M.

1991-01-01

The IAEA in the early 1980s started its first activities on hydrogeology in Mali, Niger, and Senegal through its technical co-operation programme. These activities included, first of all, local aquifer studies with environmental isotopes. The studies were found to be particularly useful for obtaining specific information on, for example, relationships between aquifers and between surface water and groundwater, and the existence or absence of recent recharge. Moreover, the IAEA established the basic infrastructures needed for the application of artificial tracer techniques and the use of nuclear instrumentation in hydrology and hydrosedimentology. Several factors underscored the need for co-ordinating the scientific activities already being carried out under existing bilateral projects. Firstly, the ''horizontal'' flow of information was very poor in spite of the similarity between the hydrological and hydrogeological problems encountered in the three countries. Secondly, political frontiers do not generally follow the boundaries of the hydrological basins, so that the same aquifer can be shared between several countries. Thirdly, the costly infrastructure established by the IAEA in certain countries deserved to be utilized at the regional level. To meet these concerns, an African regional project was launched 4 years ago on the development of isotope and nuclear techniques in hydrology in the Sahelian countries. Its main objectives were to further broaden ongoing studies in the participating countries; to strengthen training; to promote exchange of information on various previous studies; to foster co-operation between the different institutes involved in these studies; and to reinforce the infrastructures established by the IAEA and their utilization in the region

Chemical and environmental isotope study of precipitation in Syria

International Nuclear Information System (INIS)

Kattan, Z.

1999-01-01

Waters from a network of rainfall collection covering mine meteorological stations distributed mainly in the western part of Syria have been assayed using chemical and environmental isotope techniques for a period of 5 months from Dec. 1989 to Apr. 1990. The chemistry of rain waters falling over the mountainous stations shows a low solute concentration (20-105 mg 1 -1 ) compared with those falling over the coastal and anterior stations (50-210 mg 1 -1 ). The rain waters was generally characterized by a high deuterium excess (d=19%) compared with that of typical global meteoric waters (d=10%). The estimated deuterium excess is lower than that for the eastern Mediterranean meteoric waters (d=22%). The altitude effect is shown up by a depletion of heavy stable isotopes of about - 0.23% and -1.65% per 100 m elevation of δ 1 8 O and δD, respectively. The spatial distribution pattern of tritium contents shows a gradual build up with increasing distance from the Syrian coast. The weighted mean tritium content in rain waters falling over the country is estimated to amount to 9.5 tritium units (TU) during the period of observation. (author)

Determination of uranium and its isotopic ratios in environmental samples

International Nuclear Information System (INIS)

Flues Szeles, M.S.M.

1990-01-01

A method for the determination of uranium and its isotopic ratios ( sup(235)U/ sup(238)U and sup(234U/ sup(238)U) is established in the present work. The method can be applied in environmental monitoring programs of uranium enrichment facilities. The proposed method is based on the alpha spectrometry technique which is applied after a purification of the sample by using an ionic exchange resin. The total yield achieved was (91 + 5)% with a precision of 5%, an accuracy of 8% and a lower limit of detection of 7,9 x 10 sup(-4)Bq. The uranium determination in samples containing high concentration of iron, which is an interfering element present in environmental samples, particularly in soil and sediment, was also studied. The results obtained by using artificial samples containing iron and uranium in the ratio 1000:1, were considered satisfactory. (author)

Using isotopes for global warming observation

International Nuclear Information System (INIS)

Namata, K.

2002-01-01

This paper, based on a literature review, discusses the main aspects of using isotopic techniques to obtain information about global warming. The rapid increase concentration of carbon dioxide (CO 2 ) and methane (CH 4 ) in the atmosphere will result in global warming by the greenhouse effect, and the isotopic techniques constitute an efficient tool to explain this complex environmental phenomenon. (author)

Evaluation of the ''Sabana de Bogota'' aquifer using isotopes techniques

International Nuclear Information System (INIS)

Torres, E.; Jimenez, G.; Obando, E.; Sanchez, L.; Alayon, E.

1987-01-01

Groundwater from the Sabana de Bogota area was studied by means of isotopic techniques such as isotope analysis, injection of tracers for determination of hydrogeological parameters, velocity measurements using tracers. These results combined with the ones obtained by conventional techniques were used to determine recharge area, origin, equipotencial lines and direction of groundwater. The results show that a combined application of classical and nuclear methods may establish rather reasonable hydrogeological concepts without investing much time and money

The status of applying stable isotope in the studies of environmental science

International Nuclear Information System (INIS)

Bai Zhipeng; Zhang Liwen; Zhu Tan; Feng Yinchang

2007-01-01

The stable isotope composition is characteristic in the pollution source, and it is relatively fixed in the process of transferring and reaction. At present the precise analysis result of stable isotope ratio can be obtained easily. So the stable isotopes can be applied to the pollution affair arbitration and source study. The concept and analytical method of stable isotopes are introduced. The research status of the stable isotopes in the field of environmental science and the isotope fractionation is reviewed. (authors)

Recent applications of stable isotopes in environmental medicine in germany

International Nuclear Information System (INIS)

Krumbiegel, P.; Herbarth, O.

2000-01-01

In the last few years, a new quality in the application of stable isotopes became manifest. It is the establishment of stable isotopes as a tool in medical routine diagnosis - a novel field of nuclear medicine - and in environmental-medical epidemiological surveys. Owing to missing suitable radioactive isotopes of the bio elements carbon and nitrogen and because of ethical problems in the human use of some radionuclides, the stable isotopes 13 C and 1% N play a key role in this new field. A review is given about four new stable isotope-aided methods for in vivo organ function test. Three of them were developed in Leipzig, germany, and one in houston/Texas. We have validated the tests and then introduced into medical and environmental routine diagnostic use: ( 15 N Methacetin and ( 13 C) methacetin liver function tests to characterize the detoxification capacity of the human liver; ( 15 N) Urea and ( 13 C) urea tests to detect the colonization of the human stomach by the bacterium helicobacter pylori. This bacterium is, as known, responsible for gastritis and ulcer of the gastrointestinal tract. The transmission ways of H. Pylori are under investigation world-wide

Environmental isotope data no. 10: World survey of isotope concentration in precipitation (1988-1991). Report from a network

International Nuclear Information System (INIS)

1994-01-01

This is the tenth volume of the publication Environmental Isotope Data: World Survey of Isotope Concentration in Precipitation. This volume is primarily concerned with the concentration of the environmental isotopes (tritium, deuterium and oxygen-18) in monthly samples of precipitation taken by a global network of 169 stations in the period 1988 to 1991. Selected meteorological data, such as the amount of precipitation, mean water vapour pressure and surface air temperature, are also presented. Data before 1988 which were unavailable at the time of the earlier issues have also been included in the latter part of this volume as late reports. The data are being widely used in hydrological, hydrometeorological and climatological studies. 9 refs, 2 figs

Management of ground water using isotope techniques

International Nuclear Information System (INIS)

Romani, Saleem

2004-01-01

Ground water play a major role in national economy and sustenance of life and environment. Prevalent water crisis in India includes falling water table, water quality deterioration, water logging and salinity. Keeping in view the increasing thrust on groundwater resources and the present scenario of availability vis-a vis demand there is a need to reorient our approach to ground water management. The various ground water management options require proper understanding of ground water flow system. Isotopes are increasingly being applied in hydrogeological investigations as a supplementary tool for assessment of aquifer flow and transport characteristics. Isotope techniques coupled with conventional hydrogeological and hydrochemical methods can bring in greater accuracy in the conceptualization of hydrogeological control mechanism. The use of isotope techniques in following areas can certainly be of immense help in implementing various ground water management options in an efficient manner. viz.Interaction between the surface water - groundwater systems to plan conjunctive use of surface and ground water. Establishing hydraulic interconnections between the aquifers in a multi aquifer system. Depth of circulation of water and dating of ground water. Demarcating ground water recharge and discharge areas. Plan ground water development in coastal aquifers to avoid sea water ingress. Development of flood plain aquifer. (author)

Isotope techniques in water resources development and management. Proceedings

International Nuclear Information System (INIS)

1999-01-01

The 10th International Symposium on Isotope Techniques in Water Resources Development and Management was organized by the International Atomic Energy Agency in co-operation with UNESCO, WMO and International Association of Hydrological Sciences and was held at IAEA Headquarters, Vienna, during 10-14 May 1999. The symposium provided an international forum for assessing the status and recent advances in isotope applications to water resources and an exchange of information on the following main themes: processes at the interface between the atmosphere and hydrosphere; investigations in surface waters and groundwaters: their origin, dynamics, interrelations; problems and techniques for investigating sedimentation; water resources issues: pollution, source and transport of contaminants, salinization, water-rock interaction and processes in geothermal systems; isotope data interpretation and evaluation methodologies: modelling approaches. The proceedings contain the 46 papers presented and extended synopses of poster presentations; each of them was indexed individually

Isotope correlation techniques for verifying input accountability measurements at a reprocessing plant

International Nuclear Information System (INIS)

Umezawa, H.; Nakahara, Y.

1983-01-01

Isotope correlation techniques were studied to verify input accountability measurements at a reprocessing plant. On the basis of a historical data bank, correlation between plutonium-to-uranium ratio and isotopic variables was derived as a function of burnup. The burnup was determined from the isotopic ratios of uranium and plutonium, too. Data treatment was therefore made in an iterative manner. The isotopic variables were defined to cover a wide spectrum of isotopes of uranium and plutonium. The isotope correlation techniques evaluated important parameters such as the fuel burnup, the most probable ratio of plutonium to uranium, and the amounts of uranium and plutonium in reprocessing batches in connection with fresh fuel fabrication data. In addition, the most probable values of isotope abundance of plutonium and uranium could be estimated from the plutonium-to-uranium ratio determined, being compared with the reported data for verification. A pocket-computer-based system was developed to enable inspectors to collect and evaluate data in a timely fashion at the input accountability measurement point by the isotope correlation techniques. The device is supported by battery power and completely independent of the operator's system. The software of the system was written in BASIC. The data input can be stored in a cassette tape and transferred into a higher level computer. The correlations used for the analysis were given as a form of analytical function. Coefficients for the function were provided relevant to the type of reactor and the initial enrichment of fuel. (author)

MIR hollow waveguide (HWG) isotope ratio analyzer for environmental applications

Science.gov (United States)

Wang, Zhenyou; Zhuang, Yan; Deev, Andrei; Wu, Sheng

2017-05-01

An advanced commercial Mid-InfraRed Isotope Ratio (IR2) analyzer was developed in Arrow Grand Technologies based on hollow waveguide (HWG) as the sample tube. The stable carbon isotope ratio, i.e. δ13C, was obtained by measuring the selected CO2 absorption peaks in the MIR. Combined with a GC and a combustor, it has been successfully employed to measure compound specific δ13C isotope ratios in the field. By using both the 1- pass HWG and 5-path HWG, we are able to measure δ13C isotope ratio at a broad CO2 concentration of 300 ppm-37,500 ppm. Here, we demonstrate its applications in environmental studies. The δ13C isotope ratio and concentration of CO2 exhaled by soil samples was measured in real time with the isotope analyzer. The concentration was found to change with the time. We also convert the Dissolved Inorganic Carbon (DIC) into CO2, and then measure the δ13C isotope ratio with an accuracy of better than 0.3 ‰ (1 σ) with a 6 min test time and 1 ml sample usage. Tap water, NaHCO3 solvent, coca, and even beer were tested. Lastly, the 13C isotope ratio of CO2 exhaled by human beings was obtained <10 seconds after simply blowing the exhaled CO2 into a tube with an accuracy of 0.5‰ (1 σ) without sample preconditioning. In summary, a commercial HWG isotope analyzer was demonstrated to be able to perform environmental and health studies with a high accuracy ( 0.3 ‰/Hz1/2 1 σ), fast sampling rate (up to 10 Hz), low sample consumption ( 1 ml), and broad CO2 concentration range (300 ppm-37,500 ppm).

Lead isotopic compositions of environmental certified reference materials for an inter-laboratory comparison of lead isotope analysis

International Nuclear Information System (INIS)

Aung, Nyein Nyein; Uryu, Tsutomu; Yoshinaga, Jun

2004-01-01

Lead isotope ratios, viz. 207 Pb/ 206 Pb and 208 Pb/ 206 Pb, of the commercially available certified reference materials (CRMs) issued in Japan are presented with an objective to provide a data set, which will be useful for the quality assurance of analytical procedures, instrumental performance and method validation of the laboratories involved in environmental lead isotope ratio analysis. The analytical method used in the present study was inductively coupled plasma quadrupole mass spectrometry (ICPQMS) presented by acid digestion and with/without chemical separation of lead from the matrix. The precision of the measurements in terms of the relative standard deviation (RSD) of triplicated analyses was 0.19% and 0.14%, for 207 Pb/ 206 Pb and 208 Pb/ 206 Pb, respectively. The trueness of lead isotope ratio measurements of the present study was tested with a few CRMs, which have been analyzed by other analytical methods and reported in various literature. The lead isotopic ratios of 18 environmental matrix CRMs (including 6 CRMs analyzed for our method validation) are presented and the distribution of their ratios is briefly discussed. (author)

Application of isotope techniques to investigate groundwater pollution

International Nuclear Information System (INIS)

1998-10-01

This publication is a compilation of scientific results from the Co-ordinated Research Project (CRP) on the Application of Isotope Techniques to Investigate Groundwater Pollution which was implemented from 1995 to 1997. The conclusions of the CRP were presented by scientists from the following participating Member States: Austria, Brazil, China, Czech Republic, France, Hungary, India, Israel, Italy, New Zealand, Pakistan, Poland, Senegal and the United Kingdom. The CRP was implemented in recognition of the importance of protecting groundwater resources, and promoting the role of isotope techniques when integrated to classical hydrological methods to identify the sources and mechanisms of by which pollution takes place. The results of the CRP are expected to find practical applications in tackling hydrological problems encountered in technical co-operation projects of the IAEA. This publication could also provide a contribution toward the continuing efforts of various sectors to investigate, mitigate and control the threat of groundwater pollution. This publication includes the results of 16 investigations dealing with isotopes of hydrogen, carbon, nitrogen, oxygen and sulfur integrated to some extent with the classical hydrological tools of investigation. Each document in this compilation is provided with abstract and index

Isotope ratios as pollutant source and behaviour indicators

International Nuclear Information System (INIS)

1975-01-01

Recent years have witnessed significant advances in isotope techniques for identifying origins and for studying the behaviour of trace contaminants and pollutants of the environment under actual existing environmental conditions. Improvements in the supply of stable isotopes and their labelled compounds, instrumental analysis and information on stable or radioactive isotopic ratios of existing environmental contaminants as a function of origin or behaviour have provided relatively new tools for the environmental scientist. While variations in natural or existing environmental stable and radioactive nuclides could be regarded as 'background noise' in conventional tracer experiments they promised unique information about sources and behaviour to those who listened carefully. (author)

Strontium isotope study of coal utilization by-products interacting with environmental waters.

Science.gov (United States)

Spivak-Birndorf, Lev J; Stewart, Brian W; Capo, Rosemary C; Chapman, Elizabeth C; Schroeder, Karl T; Brubaker, Tonya M

2012-01-01

Sequential leaching experiments on coal utilization by-products (CUB) were coupled with chemical and strontium (Sr) isotopic analyses to better understand the influence of coal type and combustion processes on CUB properties and the release of elements during interaction with environmental waters during disposal. Class C fly ash tended to release the highest quantity of minor and trace elements-including alkaline earth elements, sodium, chromium, copper, manganese, lead, titanium, and zinc-during sequential extraction, with bottom ash yielding the lowest. Strontium isotope ratios ((87)Sr/(86)Sr) in bulk-CUB samples (total dissolution of CUB) are generally higher in class F ash than in class C ash. Bulk-CUB ratios appear to be controlled by the geologic source of the mineral matter in the feed coal, and by Sr added during desulfurization treatments. Leachates of the CUB generally have Sr isotope ratios that are different than the bulk value, demonstrating that Sr was not isotopically homogenized during combustion. Variations in the Sr isotopic composition of CUB leachates were correlated with mobility of several major and trace elements; the data suggest that arsenic and lead are held in phases that contain the more radiogenic (high-(87)Sr/(86)Sr) component. A changing Sr isotope ratio of CUB-interacting waters in a disposal environment could forecast the release of certain strongly bound elements of environmental concern. This study lays the groundwork for the application of Sr isotopes as an environmental tracer for CUB-water interaction. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Determination of plutonium isotopes in waters and environmental solids: A review

DEFF Research Database (Denmark)

Qiao, Jixin; Hou, Xiaolin; Miró, Manuel

2009-01-01

A number of analytical methods have been developed in the past few years for environmental monitoring of plutonium (Pu) isotopes around nuclear facilities within protocols for emergency preparedness as well as for risk assessment of contaminated areas resulting from nuclear weapon tests, nuclear...... accidents, and the discharge of nuclear waste. This article summarizes and critically compares recently reported methods for determination of Pu isotopes in waters and environmental solid substrates, in which sample pre-treatment is imperative for separation of the target species from matrix ingredients and...

French days on stable isotopes

International Nuclear Information System (INIS)

2000-01-01

These first French days on stable isotopes took place in parallel with the 1. French days of environmental chemistry. Both conferences had common plenary sessions. The conference covers all aspects of the use of stable isotopes in the following domains: medicine, biology, environment, tracer techniques, agronomy, food industry, geology, petroleum geochemistry, cosmo-geochemistry, archaeology, bio-geochemistry, hydrology, climatology, nuclear and particle physics, astrophysics, isotope separations etc.. Abstracts available on CD-Rom only. (J.S.)

Isotope techniques in groundwater hydrology 1974, Vol. I. Proceedings of a symposium

International Nuclear Information System (INIS)

1974-01-01

This symposium, held in Vienna on 11-15 March, 1974, was the fourth on the subject of isotope hydrology organized by the International Atomic Energy Agency. However, this one was limited to groundwater hydrology in view of the general increase of interest and activity in isotope hydrology since the previous meeting in 1970. The proceedings of this symposium are a good indicator of the present world status of these techniques. Thus one notes that many of the studies are in the developing areas of the world. Furthermore, there has been a shift to using these techniques as an additional applied tool in specific problems of development of water resources. Examples of such applications also give evidence of the closer collaboration between isotope specialists, who originally developed the methods, and hydrogeologists and geochemists. It is hoped that these proceedings will contribute to a wider appreciation of the potential use of isotope techniques to hydrological problems associated with the development of groundwater for agriculture, community water supply and industry

Environmental readiness document advanced isotope separation program

International Nuclear Information System (INIS)

1981-08-01

Advanced Isotope Separation (AIS) techniques hold the promise of significantly reducing the cost of enriching uranium for use in commercial nuclear power reactors. By reducing uranium enrichment costs, the tails assay of an enrichment plant can be lowered resulting in a decrease in the requirements for natural uranium feed material and a small decrease in the cost of the electricity produced by nuclear power plants. With this increased efficiency of uranium enrichment, there will be an overall reduction in the environmental impacts associated with uranium processing in the front end of the fuel cycle. AIS is characterized by much lower energy requirements compared to diffusion; comparable energy requirements to centrifuge; generally similar offsite environmental and socioeconomic impacts to centrifuge; and substantially fewer secondary impacts than diffusion because of reduced need for power. In the broadest definitions of environmental concerns, the socio-political and security aspects of proliferation and safeguards are the most significant in reducing AIS to practice. The potential exists for exposure of plant workers or offsite personnel to radioactive material or process chemical during normal or accident conditions. Some AIS processes make use of strong magnetic or electromagnetic fields and lasers, and methods are required to monitor the levels of these radiations. The AIS processes will routinely generate chemical and radioactive wastes. Additional wastes may be generated during plant decontamination and decommissioning. All of these wastes must be managed to meet Federal and state requirements. Finally, based on preliminary designs, some of the AIS processes may require significant, relative to US and world supply, quantities of a coating material

Uses of stable isotopes

International Nuclear Information System (INIS)

Axente, Damian

1998-01-01

The most important fields of stable isotope use with examples are presented. These are: 1. Isotope dilution analysis: trace analysis, measurements of volumes and masses; 2. Stable isotopes as tracers: transport phenomena, environmental studies, agricultural research, authentication of products and objects, archaeometry, studies of reaction mechanisms, structure and function determination of complex biological entities, studies of metabolism, breath test for diagnostic; 3. Isotope equilibrium effects: measurement of equilibrium effects, investigation of equilibrium conditions, mechanism of drug action, study of natural processes, water cycle, temperature measurements; 4. Stable isotope for advanced nuclear reactors: uranium nitride with 15 N as nuclear fuel, 157 Gd for reactor control. In spite of some difficulties of stable isotope use, particularly related to the analytical techniques, which are slow and expensive, the number of papers reporting on this subject is steadily growing as well as the number of scientific meetings organized by International Isotope Section and IAEA, Gordon Conferences, and regional meeting in Germany, France, etc. Stable isotope application development on large scale is determined by improving their production technologies as well as those of labeled compound and the analytical techniques. (author)

Guidebook on nuclear techniques in hydrology. 1983 ed.

International Nuclear Information System (INIS)

1983-01-01

This guidebook serves as an introduction to the range of isotope techniques that are applicable in hydrology. The basic principles of each application are described followed by examples of case studies. This method of treatment should enable hydrologists to identify and assess the possible use of isotope techniques to their particular problems, although hydrologists having no prior experience in the use of isotope techniques will need to collaborate with isotope hydrologists. Isotope techniques may provide an independent approach for solving a hydrological problem. However, it should be realised that these techniques are only one of a number of tools now available to the hydrologist and their use in conjunction with other hydrological methods is likely to be most productive. Isotope hydrology may be considered under three headings: (1) the use of variations in the environmental isotopic composition of water; (2) the use of artificial radioactive tracers; (3) the use of radioisotope instruments. The following sections summarise the elements of radioactivity and interaction of radiation with matter considered necessary for an understanding of the use of isotope techniques in hydrology. Other sections in this introduction deal with the reasons for the variations in the environmental isotopic composition of water, the precautions in sampling of water, the use and choice of artificial radioactive tracers and precautions in their use, and the principles of tracer techniques

Improvement of Groundwater Modeling by Using of the Environmental Isotopes with Liquid Water Isotope Analyzer

International Nuclear Information System (INIS)

Kamdee, K.; Laoharojanaphand, S.; Noipow, N.; Jaruratanab, A.; Detoup, D.; Chantarachota, W.

2011-06-01

Full text: A new analysis method of stable isotope was developed by using the absorption characteristic of pulsed laser beam concept for trace gas analysis (O'Keefe, 1989). The method provides high performance and analysis capacity but contribute less applicative compared to the traditional IRMS methods by using only pure liquids phase of water. The methods are using with environmental isotopes techniques to improve groundwater management of the Chiang Mai Basin, the biggest Cenozoic basin in the northern part of Thailand. Unconsolidated and consolidated sediments form three main aquifers, the Chao Phraya, Chiang Rai and Chiang Mai Aquifers, show clearly unconfined to confined characteristic. From chemical composition of the groundwater, most of groundwater samples are of calcium-magnesium bicarbonate and sodium-potassium bicarbonate type and few of them show the risk of fluorine content for drinking purpose. Radioactive Carbon results showed the ages of groundwater vary from 2,300 ±240 to +30,000 years. The tritium results showed low tritium content, less than 1.0 Tritium Unit (T.U.) in all groundwater samples, was compared to the surface water that arranged from 2.1-2.6 T.U. The stable isotope result of the liquid water isotope analyzer (Los Gatos Research: DLT-100) indicated the main recharge resources of groundwater in the basin was from the local rain water in terrace area and from both sides of the basin at different altitudes. Surface water from rivers and dams have no contribution to the origin of groundwater in the basin. The radioactive and stable isotope data of ground water from different aquifers did not show clear separation and was similar to the previous study of the basin in 1993 (Buapheng et al., 1993). Thus, the recent data accrue to be convinced that there was some mixing of groundwater within three aquifers and rather slow replenishment. The conceptual modeling of groundwater system in Chiang Mai Basin can be revised. The Upper part of Chiang

Contribution to optimisation of Environmental Isotopes tracing in Hydrogeology. Case study of Madagascar

International Nuclear Information System (INIS)

RAJAOBELISON, J.

2003-01-01

The aim of this work is to suggest some improvements on the theory of interpretation and on the methodological approach for the optimum use of environmental isotopes tracing applied to hydrogeological investigation. A review of the theory of environmental isotopes used in hydrogeology has been made. The main constraints have been highlighted and led to some comments and proposals of improvement, in particular with regard to the continental effect on stable isotopes, to the seasonal variation of groundwater 1 4C content, and to the appropriate model for fractured crystalline aquifers. A literature survey on ten specific scientific papers, dealing with isotopic hydrology in miscellaneous types of aquifers and catchments, allowed to draw a synthesis of the hydrogeological, geochemical and isotopic constraints. A proposal of optimum methodological approach, taking into account the above mentioned constraints, have been inferred. The results of an on-going hydrogeological investigation carried out in the Southern crystalline basement and coastal sedimentary aquifers of Madagascar highlights an unusual methodological approach based on the lack of initial basic hydrogeological data. Besides, it shows to what extent the experience of the above mentioned research works can apply in the specific case of the complex aquifers of Madagascar. The lessons gained from this study contribute to enrich the synthesis of environmental isotopes constraints in hydrogeology and lead to a more realistic methodological approach proposal wich is likely to better make profitable the isotope hydrology technology

Dynamics of radioactive lead isotopes in the global environmental atmosphere

International Nuclear Information System (INIS)

Koike, Yuya; Kosako, Toshiso

2006-01-01

Fundamental information of radioactive lead isotopes, which used as the atmospheric tracer in the global environmental atmosphere, is reviewed. Emanation and exhalation of Rn and Tn, parent nuclide, is stated. Some reports on measurement and application of short-lived lead isotopes are reported. Transfer of radioactive lead isotopes in the atmosphere, vertical profiles of radon, thoron, and short-lived lead isotopes for different turbulent mixing conditions, deposition to aerosol, basic processes of Rn decay product behavior in air defining 'unattached' and 'aerosol-attached' activities, seasonal variation of atmospheric 210 Pb concentration at Beijing and Chengdu, seasonal variation of atmospheric 212 Pb concentration at several observation sites in Japan Islands, and variation in the atmospheric concentration of 212 Pb along with SO 2 are shown. (S.Y.)

Isotope techniques in a water survey

Energy Technology Data Exchange (ETDEWEB)

NONE

1959-10-15

The circulation of water is one of the most interesting of natural phenomena. Exact knowledge of fluctuations in precipitation and other factors in water circulation is extremely important for areas which have a very limited water supply. The information about the circulation of water is also important for the disposal of radioactive wastes on land and in the sea. Before satisfactory methods of disposal can be devised, it is essential to know precisely whether and to what extent the wastes can be transferred from one place to another as a result of the circulation of water. One of the most efficient ways of gathering such information is to study the isotopic ratios of hydrogen and oxygen in water in different areas. Tritium can serve a s a tracer in the study of water circulation. A variety of information can be obtained by measurements of isotopic composition of water, e.g. the average age of the water molecule in a lake or age, size, storage time and flow rate of a groundwater body. The modern tools of hydrological research cannot be employed by every country, because measurements of the isotopic composition of water require great technical skill and scientific knowledge. Besides, interpretation of isotope data in terms of hydrology and climatology requires the knowledge of certain basic data for the whole world or at least for large areas. A more complete knowledge of the worldwide variations in the isotopic composition of water would greatly facilitate the interpretation of local conditions. Guided by these considerations, the International Atomic Energy Agency has decided to initiate a study to determine the world-wide distribution of hydrogen and oxygen isotopes in water. On the basis of this study, it will be possible to make available basic data for the use of any country that wishes to apply isotope techniques for hydrological and climatological research. Under this project, it is proposed to collect samples of rain, river and ocean water in different

Development, optimisation, and application of ICP-SFMS methods for the measurement of isotope ratios

International Nuclear Information System (INIS)

Stuerup, S.

2000-07-01

The measurement of isotopic composition and isotope ratios in biological and environmental samples requires sensitive, precise, and accurate analytical techniques. The analytical techniques used are traditionally based on mass spectrometry, among these techniques is the ICP-SFMS technique, which became commercially available in the mid 1990s. This technique is characterised by high sensitivity, low background, and the ability to separate analyte signals from spectral interferences. These features are beneficial for the measurement of isotope ratios and enable the measurement of isotope ratios of elements, which it has not previously been possible to measure due to either spectral interferences or poor sensitivity. The overall purpose of the project was to investigate the potential of the single detector ICP-SFMS technique for the measurement of isotope ratios in biological and environmental samples. One part of the work has focused on the fundamental aspects of the ICP-SFMS technique with special emphasize on the features important to the measurement of isotope ratios, while another part has focused on the development, optimisation and application of specific methods for the measurement of isotope ratios of elements of nutritional interest and radionuclides. The fundamental aspects of the ICP-SFMS technique were investigated theoretically and experimentally by the measurement of isotope ratios applying different experimental conditions. It was demonstrated that isotope ratios could be measured reliably using ICP-SFMS by educated choice of acquisition parameters, scanning mode, mass discrimination correction, and by eliminating the influence of detector dead time. Applying the knowledge gained through the fundamental study, ICP-SFMS methods for the measurement of isotope ratios of calcium, zinc, molybdenum and iron in human samples and a method for the measurement of plutonium isotope ratios and ultratrace levels of plutonium and neptunium in environmental samples

Determination of 129I/127I isotope ratios in liquid solutions and environmental soil samples by ICP-MS with hexapole collision cell

OpenAIRE

Izmer, A. V.; Boulyga, S. F.; Becker, J. S.

2003-01-01

The determination of I-129 in environmental samples at ultratrace levels is very difficult by ICP-MS due to a high noise caused by Xe impurities in argon plasma gas (interference of Xe-129(+)), possible (IH2+)-I-127 interference and an insufficient abundance ratio sensitivity of the ICP mass spectrometer for I-129/I-127 isotope ratio measurement. A sensitive, powerful and fast analytical technique for iodine isotope ratio measurements in aqueous solutions and contaminated soil samples directl...

Input of environmental isotopes in the study of the recharge and the flow dynamic of aquifers

International Nuclear Information System (INIS)

Aranyossy, J.F.; Njitchoua, R.; Zuppi, G.M.

1998-01-01

Several examples of hydrogeological studies have been selected in order to illustrate the input of environmental isotopic techniques in the general knowledge of aquifer systems: evaluation of the present aquifer recharge (Mali, Senegal, Italy, North-Cameroon, North-Sahara, Niger); evidence of the recharge variation with time (Niger, Italy, Vietnam); evaluation of the aquifer characteristics and hydraulic conditions (Chad, Niger). Most of these studies were carried out in collaboration with Professor Jean-Charles Fontes. (author)

Stable Isotope Technique to Assess Intake of Human Milk in Breastfed Infants

International Nuclear Information System (INIS)

2014-01-01

This publication was developed by an international group of experts as an integral part of the IAEA’s efforts to contribute to the transfer of technology and knowledge in nutrition. Its aim is to assist Member States in their efforts to combat malnutrition by facilitating the use of relevant nuclear techniques. The stable (non-radioactive) isotope technique has been developed to assess intake of human milk in breastfed infants. The practical application of the stable isotope technique, based on analysis of deuterium by Fourier transform infrared spectrometry (FTIR), is presented in this book

Environmental isotope applications in hydrology: an overview of the IAEA's activities, experiences, and prospects

International Nuclear Information System (INIS)

Yurtsever, Y.; Araguas, L.A.

1993-01-01

Development and applications of isotope methodologies in hydrology have been an integral part of the program component of the IAEA over the last three decades, within the framework of its overall activities related to peaceful nuclear applications. The use of environmental isotopes as a means of tracing water movement in the hydrology including surface and ground water is much of the Agency's work in this field. This paper provides an overview of the temporal and spatial variations of the above cited isotopes in precipitation based on the long-term data collected from the global network, and reviews the concepts and formulations of environmental isotope applications to specific problems in hydrology and hydrogeology. (Author)

The Application of Isotope Techniques in Nutrient Assessment and Management in Riverine Systems. Present and Future

Energy Technology Data Exchange (ETDEWEB)

Ito, M.; Newman, B. D. [International Atomic Energy Agency, Isotope Hydrology Section, Vienna (Austria); Hadwen, W. L. [Australian Rivers Institute, Griffith School of Environment, Griffith University - Nathan Campus, Brisbane, Queensland (Australia); Rogers, K. [National Isotope Center, GNS Science, Lower Hutt (New Zealand); Mayer, B. [Department of Geoscience, University of Calgary, Calgary, Alberta (Canada); Hein, T. [Wasser Cluster Lunz, Interuniversitary Center for Aquatic Research, Lunz-See, and University of Natural Resources and Applied Life Sciences, Institute of Hydrobiology and Aquatic Ecosystem Management, Vienna (Austria); Stellato, L. [Centre for Isotopic Research on Cultural and Environmental Heritage (CIRCE), Seconda Universita degli Studi di Napoli, Caserta (Italy); Ohte, N. [Graduate School of Agricultural and Life Sciences, University of Tokyo, Tokyo (Japan); Mclaughlin, K. [Southern California Coastal Water Research Project, Costa Mesa, California (United States)

2013-05-15

A variety of sources contribute to nutrients in rivers and nutrients may subsequently take various pathways and undergo different transformation processes. We first review representative types of isotopes and the roles of isotope techniques that have been or could be used for nutrient assessment and management. We then present technical, financial and logistical matters to be considered in selecting appropriate isotope techniques for nutrient assessment and management. Lastly we propose several approaches on the application of isotope techniques to make more effective the studies and management of nutrients in rivers in the near future. (author)

Contribution of environmental isotopes to the study of large aquifers in Morocco

International Nuclear Information System (INIS)

Kabbaj, A.; Zeryouhi, I.; Carlier, P.

1978-01-01

The geochemistry of environmental isotopes has been applied to several aquifers in Maroc, some of them quite large: Charf el Akab in the Tanger region, the Oum er Rbia basin and the Tadla aquifer, the free nappe of limnic limes tone in the Sais plane, and the lias limestone aquifer. The isotopic investigations on the basis of hydrogeochemical data have given more precise information on the supply conditions of these aquifers. The types of water of different origin from the Atlas or the phosphate plateau in the Sais plane and the Tadla basin have been distinguished, the supply from one aquifer to another Lias nappe which, via the flexures of the Sais plane, supplies the nappe of limic limestone has been assessed, the homogeneity or heterogeneity of these aquifers has been investigated as well as their impermeability, the Tadla aquifer and the special case of Charf el Akab compared with the marine region. The findings have proved the usefulness of these techniques and permitted a specification of the general conditions for their application. (orig.) [de

Research on the use of environmental isotopes technique for safety assessment of the Dong-mo reservoir

International Nuclear Information System (INIS)

Bui Dac Dung; Trinh Van Giap; Le Tien Quan; Dang Anh Minh; Dinh Bich Lieu; Nguyen Manh Hung; Pham Quoc Ky; Ta Hong Duc; Dang Van Lap; Phung Van Luc

2007-01-01

To help end-users generate information on the rate and origin of the seepage - leakage water of the sub dam A (FA) of the Dong-mo reservoir we have conducted a research project in the 2005-2006 period. The experiences gained in this project are needed for recommending further use in other reservoirs. The main works were collecting water samples, analyzing for 18 O/ 16 O, 2 H(D)/ 1 H ratios, analyzing for 3 H(T) and chemical contents, then drawing conclusions about the origin of the seepage water and the seepage rate at the dam FA. Findings of the project showed that: a) Waters at the piezometers on the top and the 1st roof are not originated from lake water; b) Waters at the piezometers on 1st and 2nd levels, as well as seepage - leakage waters at the dam toe are mixed of lake and ground waters, and the old river bed could be the channel for ground water upcoming from beneath the dam body; c) The transit times of water from the lake to the observation points are from 3 to 4 months, and the velocity is of about 1.1x10 -3 cm/s; d) The findings from tritium analyses show that all waters around the Dong-mo area are recent waters recharged regularly by meteoric water. Based on the findings of the project we have recommended that the environmental isotope technique be applied for further investigations of origin of leakage and seepage water at other dams. (author)

Identifying the sources of produced water in the oil field by isotopic techniques

International Nuclear Information System (INIS)

Nguyen Minh Quy; Hoang Long; Le Thi Thu Huong; Luong Van Huan; Vo Thi Tuong Hanh

2014-01-01

The objective of this study is to identify the sources of the formation water in the Southwest Su-Tu-Den (STD SW) basement reservoir. To achieve the objective, isotopic techniques along with geochemical analysis for chloride, bromide, strontium dissolved in the water were applied. The isotopic techniques used in this study were the determination of water stable isotopes signatures (δ 2 H and (δ 18 O) and of the 87 Sr/ 86 Sr ratio of strontium in rock cutting sample and that dissolved in the formation water. The obtained results showed that the stable isotopes compositions of water in the Lower Miocene was -3‰ and -23‰ for (δ 18 O and (δ 2 H, respectively indicating the primeval nature of seawater in the reservoir. Meanwhile, the isotopic composition of water in the basement was clustered in a range of alternated freshwater with (δ 18 O and (δ 2 H being -(3-4)‰ and -(54-60)‰, respectively). The strontium isotopes ratio for water in the Lower Miocene reservoir was lower compared to that for water in the basement confirming the different natures of the water in the two reservoirs. The obtained results are assured for the techniques applicability, and it is recommended that studies on identification of the flow-path of the formation water in the STD SW basement reservoir should be continued. (author)

Use of environmental isotope tracer and GIS techniques to estimate basin recharge

Science.gov (United States)

Odunmbaku, Abdulganiu A. A.

The extensive use of ground water only began with the advances in pumping technology at the early portion of 20th Century. Groundwater provides the majority of fresh water supply for municipal, agricultural and industrial uses, primarily because of little to no treatment it requires. Estimating the volume of groundwater available in a basin is a daunting task, and no accurate measurements can be made. Usually water budgets and simulation models are primarily used to estimate the volume of water in a basin. Precipitation, land surface cover and subsurface geology are factors that affect recharge; these factors affect percolation which invariably affects groundwater recharge. Depending on precipitation, soil chemistry, groundwater chemical composition, gradient and depth, the age and rate of recharge can be estimated. This present research proposes to estimate the recharge in Mimbres, Tularosa and Diablo Basin using the chloride environmental isotope; chloride mass-balance approach and GIS. It also proposes to determine the effect of elevation on recharge rate. Mimbres and Tularosa Basin are located in southern New Mexico State, and extend southward into Mexico. Diablo Basin is located in Texas in extends southward. This research utilizes the chloride mass balance approach to estimate the recharge rate through collection of groundwater data from wells, and precipitation. The data were analysed statistically to eliminate duplication, outliers, and incomplete data. Cluster analysis, piper diagram and statistical significance were performed on the parameters of the groundwater; the infiltration rate was determined using chloride mass balance technique. The data was then analysed spatially using ArcGIS10. Regions of active recharge were identified in Mimbres and Diablo Basin, but this could not be clearly identified in Tularosa Basin. CMB recharge for Tularosa Basin yields 0.04037mm/yr (0.0016in/yr), Diablo Basin was 0.047mm/yr (0.0016 in/yr), and 0.2153mm/yr (0.00848in

Water stable isotope measurements of Antarctic samples by means of IRMS and WS-CRDS techniques

Science.gov (United States)

Michelini, Marzia; Bonazza, Mattia; Braida, Martina; Flora, Onelio; Dreossi, Giuliano; Stenni, Barbara

2010-05-01

In the last years in the scientific community there has been an increasing interest for the application of stable isotope techniques to several environmental problems such as drinking water safeguarding, groundwater management, climate change, soils and paleoclimate studies etc. For example, the water stable isotopes, being natural tracers of the hydrological cycle, have been extensively used as tools to characterize regional aquifers and to reconstruct past temperature changes from polar ice cores. Here the need for improvements in analytical techniques: the high request for information calls for technologies that can offer a great quantity of analyses in short times and with low costs. Furthermore, sometimes it is difficult to obtain big amount of samples (as is the case for Antarctic ice cores or interstitial water) preventing the possibility to replicate the analyses. Here, we present oxygen and hydrogen measurements performed on water samples covering a big range of isotopic values (from very negative antarctic precipitation to mid-latitude precipitation values) carried out with both the conventional Isotope Ratio Mass Spectrometry (IRMS) technique and with a new method based on laser absorption techniques, the Wavelenght Scanned Cavity Ringdown Spectroscopy (WS-CRDS). This study is focusing on improving the precision of the measurements carried out with WS-CRDS in order to extensively apply this method to Antarctic ice core paleoclimate studies. The WS-CRDS is a variation of the CRDS developed in 1988 by O'Keef and Deacon. In CRDS a pulse of light goes through a box with high reflective inner surfaces; when there is no sample in the box the light beam doesn't find any obstacle in its path, but the reflectivity of the walls is not perfect so eventually there will be an absorption of the light beam; when the sample is injected in the box there is absorption and the difference between the time of absorption without and with sample is proportional to the quantity

The Potential for Zinc Stable Isotope Techniques and Modelling to Determine Optimal Zinc Supplementation

Directory of Open Access Journals (Sweden)

Cuong D. Tran

2015-05-01

Full Text Available It is well recognised that zinc deficiency is a major global public health issue, particularly in young children in low-income countries with diarrhoea and environmental enteropathy. Zinc supplementation is regarded as a powerful tool to correct zinc deficiency as well as to treat a variety of physiologic and pathologic conditions. However, the dose and frequency of its use as well as the choice of zinc salt are not clearly defined regardless of whether it is used to treat a disease or correct a nutritional deficiency. We discuss the application of zinc stable isotope tracer techniques to assess zinc physiology, metabolism and homeostasis and how these can address knowledge gaps in zinc supplementation pharmacokinetics. This may help to resolve optimal dose, frequency, length of administration, timing of delivery to food intake and choice of zinc compound. It appears that long-term preventive supplementation can be administered much less frequently than daily but more research needs to be undertaken to better understand how best to intervene with zinc in children at risk of zinc deficiency. Stable isotope techniques, linked with saturation response and compartmental modelling, also have the potential to assist in the continued search for simple markers of zinc status in health, malnutrition and disease.

The Potential for Zinc Stable Isotope Techniques and Modelling to Determine Optimal Zinc Supplementation

Science.gov (United States)

Tran, Cuong D.; Gopalsamy, Geetha L.; Mortimer, Elissa K.; Young, Graeme P.

2015-01-01

It is well recognised that zinc deficiency is a major global public health issue, particularly in young children in low-income countries with diarrhoea and environmental enteropathy. Zinc supplementation is regarded as a powerful tool to correct zinc deficiency as well as to treat a variety of physiologic and pathologic conditions. However, the dose and frequency of its use as well as the choice of zinc salt are not clearly defined regardless of whether it is used to treat a disease or correct a nutritional deficiency. We discuss the application of zinc stable isotope tracer techniques to assess zinc physiology, metabolism and homeostasis and how these can address knowledge gaps in zinc supplementation pharmacokinetics. This may help to resolve optimal dose, frequency, length of administration, timing of delivery to food intake and choice of zinc compound. It appears that long-term preventive supplementation can be administered much less frequently than daily but more research needs to be undertaken to better understand how best to intervene with zinc in children at risk of zinc deficiency. Stable isotope techniques, linked with saturation response and compartmental modelling, also have the potential to assist in the continued search for simple markers of zinc status in health, malnutrition and disease. PMID:26035248

Analytical techniques for measurement of 99Tc in environmental samples

International Nuclear Information System (INIS)

Anon.

1979-01-01

Three new methods have been developed for measuring 99 Tc in environmental samples. The most sensitive method is isotope dilution mass spectrometry, which allows measurement of about 1 x 10 -12 grams of 99 Tc. Results on analysis of five samples by this method compare very well with values obtained by a second independent method, which involves counting of beta particles from 99 Tc and internal conversion electrons from /sup 97m/Tc. A third method involving electrothermal atomic absorption has also been developed. Although this method is not as sensitive as the first two techniques, the cost per analysis is expected to be considerably less for certain types of samples

Isotope technique in JPS dam surveillance: its potential

International Nuclear Information System (INIS)

Sabri Hassan

2006-01-01

Controlling seepage is one of the most important requirements for safe dams. Any leakage at an earth embankment may be potentially dangerous since rapid internal erosion may quickly enlarge an initially minor defect. Thus dam owners need to have thorough surveillance programs that can forewarn of impending problems from seepage or other factors influencing the safety of dams. In carrying out dam surveillance works, all possible efforts should be considered and foreseeing the potential of isotope technique, JPS (Department of Irrigation and Drainage, Malaysia) and MINT (Malaysian Institute for Nuclear Technology Research) participated actively in the UNDP/RCA/IAEA program under RAS/8/093 project sponsored by the International Atomic Energy Agency (IAEA). Through these activities, it was noted that the technique demonstrated very promising potentials such as in assisting dam site selections, site investigations, watershed studies, dam and reservoir design, leakage investigations and sediments related issues, the two latter ones being relatively critical during the operational life of the dam. Establishment of baseline isotopic characteristics (or fingerprint), hydrochemistry, electrical conductivity and temperature profiles is underway for all JPS dams to be later utilized in diagnosing seepage related issues it is suggested that application of this technique be extended to other dam owners nationwide. (Author)

Animal science: Isotopes and nuclear techniques

International Nuclear Information System (INIS)

Vercoe, J.E.

1978-01-01

In many regions of the world, animal production is limited by poor growth, reproductive performance and milk output of livestock, thus limiting the availability of animal products such as meat, milk, leather, etc., for use by man. Reduced animal production results from inadequate or unbalanced nutrition, lack of adaptation to climatic conditions, and parasitic and other diseases The production from animals can be improved on the one hand by improving genotypes (the breeds and strains within a given species) to make them better suited to the environment to which they are exposed, and on the other hand by modifying the components of the environment which are limiting the production. In practice, a combination of these two strategies is usually desirable but the relative importance of each is determined by short- and long-term economic considerations and the likely environmental consequences. Isotopes and radiation play an important part in identifying and alleviating the genetic and environmental limitations to animal production

Environmental forcing of terrestrial carbon isotope excursion amplification across five Eocene hyperthermals

Science.gov (United States)

Bowen, G. J.; Abels, H.

2015-12-01

Abrupt changes in the isotope composition of exogenic carbon pools accompany many major episodes of global change in the geologic record. The global expression of this change in substrates that reflect multiple carbon pools provides important evidence that many events reflect persistent, global redistribution of carbon between reduced and oxidized stocks. As the diversity of records documenting any event grows, however, discrepancies in the expression of carbon isotope change among substrates are almost always revealed. These differences in magnitude, pace, and pattern of change can complicate interpretations of global carbon redistribution, but under ideal circumstances can also provide additional information on changes in specific environmental and biogeochemical systems that accompanied the global events. Here we evaluate possible environmental influences on new terrestrial records of the negative carbon isotope excursions (CIEs) associated with multiple hyperthermals of the Early Eocene, which show a common pattern of amplified carbon isotope change in terrestrial paleosol carbonate records relative to that recorded in marine substrates. Scaling relationships between climate and carbon-cycle proxies suggest that that the climatic (temperature) impact of each event scaled proportionally with the magnitude of its marine CIE, likely implying that all events involved release of reduced carbon with a similar isotopic composition. Amplification of the terrestrial CIEs, however, does not scale with event magnitude, being proportionally less for the first, largest event (the PETM). We conduct a sensitivity test of a coupled plant-soil carbon isotope model to identify conditions that could account for the observed CIE scaling. At least two possibilities consistent with independent lines of evidence emerge: first, varying effects of pCO2 change on photosynthetic carbon isotope discrimination under changing background pCO2, and second, contrasting changes in regional

Isotope techniques to identify recharge areas of springs for rainwater harvesting in the mountainous region of Gaucher area, Chamoli district, Uttarakhand

International Nuclear Information System (INIS)

Shivanna, K.; Tirumalesh, K.; Noble, J.; Joseph, T.B.; Singh, Gursharan; Joshi, A.P.; Khati, V.S.

2008-01-01

Environmental isotope techniques have been employed to identify the recharge areas of springs in India, in order to construct artificial recharge structures for rainwater harvesting and groundwater augmentation for their rejuvenation. A model project was taken up in the mountainous region of Gaucher area, Chamoli District, Uttarakhand for this purpose. The springs in this regions are seasonal and are derived from seepage waters flowing through the shallow weathered and fractured zone. The chemistry of high-altitude springs is similar to that of precipitation, whereas water-rock interactions contributes to increased mineralization in low-altitude springs. The stable isotopic variation in precipitation suggests that the altitude effect for Gaucher area is -0.55% for δ 18 O and -3.8% for δ 2 H per 100 m rise in altitude. Based on local geology, geomorphology, hydrochemistry and isotope information, the possible recharge areas inferred for valleys 1, 2 and 3 are located at altitudes of 1250, 1330 and 1020 m amsl respectively. Water conservation and recharge structures such as subsurface dykes, check bunds and contour trenches were constructed at the identified recharge areas in the respective valleys for controlling the subsurface flow, rainwater harvesting and groundwater augmentation respectively. As a result, during and after the following monsoon, the discharge rates of the springs not only increased significantly, but also did not dry up even during the dry period. The study shows that the isotope techniques can be effectively used in identifying recharge areas of springs in the Himalayan region. It also demonstrates the advantage of isotope techniques over conventional methods. (author)

Application of Isotope Techniques for Assessing Nutrient Dynamics in River Basins

International Nuclear Information System (INIS)

2013-05-01

Nutrients are necessary for the growth and survival of animals, plants and other organisms. However, industrial, agricultural and urban development has dramatically increased nutrient levels in river systems, including nitrogen and phosphorus containing substances, degrading water quality, causing acidification and eutrophication and affecting aquatic ecosystems. Nutrient assessment and management in river systems has been an important part of water resource management for the past few decades, but the provision of appropriate and effective nutrient assessment and management continues to be a challenge for water resource managers and policy makers. Difficulties in assessment and management are due in part to the fact that nutrients in rivers may originate from a variety of sources, take numerous pathways and transform into other substances. This publication presents the application of isotope techniques as a powerful tool for evaluating the sources, pathways, transformation, and fate of nutrients in river systems, focusing on nitrogen, phosphorus and carbon containing substances. Eleven researchers using various isotope techniques for different aspects of nutrient studies and two IAEA officers met in a technical meeting and discussed a publication that could assist water resource managers in dealing with nutrient assessment and management issues in river systems. These researchers also recognized the need for careful consideration in selecting appropriate isotope techniques in view of not only technical, but also financial, human resources and logistical capabilities, among others. These contributors are listed as major authors in the later pages of this document. This publication aims at serving water resource managers as a guidebook on the application of isotope techniques in nutrient assessment and management, but it is also expected to be of practical aid for other interested and concerned individuals and organization.

Application of Isotope Techniques for Assessing Nutrient Dynamics in River Basins

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-05-15

Nutrients are necessary for the growth and survival of animals, plants and other organisms. However, industrial, agricultural and urban development has dramatically increased nutrient levels in river systems, including nitrogen and phosphorus containing substances, degrading water quality, causing acidification and eutrophication and affecting aquatic ecosystems. Nutrient assessment and management in river systems has been an important part of water resource management for the past few decades, but the provision of appropriate and effective nutrient assessment and management continues to be a challenge for water resource managers and policy makers. Difficulties in assessment and management are due in part to the fact that nutrients in rivers may originate from a variety of sources, take numerous pathways and transform into other substances. This publication presents the application of isotope techniques as a powerful tool for evaluating the sources, pathways, transformation, and fate of nutrients in river systems, focusing on nitrogen, phosphorus and carbon containing substances. Eleven researchers using various isotope techniques for different aspects of nutrient studies and two IAEA officers met in a technical meeting and discussed a publication that could assist water resource managers in dealing with nutrient assessment and management issues in river systems. These researchers also recognized the need for careful consideration in selecting appropriate isotope techniques in view of not only technical, but also financial, human resources and logistical capabilities, among others. These contributors are listed as major authors in the later pages of this document. This publication aims at serving water resource managers as a guidebook on the application of isotope techniques in nutrient assessment and management, but it is also expected to be of practical aid for other interested and concerned individuals and organization.

Use of isotopes techniques during the life cycle of dams and reservoirs: cases in Latin American

International Nuclear Information System (INIS)

Leon, S.H.

2006-01-01

In fact, the combined use of isotope and conventional techniques is considered a reliable tool for studying problems related to dam safety and has become a new culture for civil / dam engineers, hydro geologists and researchers who involve in water resource management fields. The use of natural (environmental) and artificial isotopes as tracers together with systematic analyses of the hydrochemistry, electrical conductivity and temperature profiles data during the investigation and monitoring of leakage and seepage in dams and reservoirs are now becoming popular among the dam owners in seeking the best solution for dam related problems. Many studies and experiences worldwide on effective dam management programmes have indicated that any investigation about leakages and seepages are not possible to be accomplished successfully without synergic application of the conventional technologies and isotopic techniques. The major advancement in this area is the measurements study for establishment of baseline hydrogeology at each hydraulic work project like dams and reservoirs. The parameters include hydro chemicals, isotopic and geologic in each basin, river, reservoir, dams, tunnels and groundwater which provide high value information for decision making during all the stages in the life cycle of the dams. Many hydroelectric and water supply projects in latin america apply these investigation strategies. The main target is to investigate and understand the water movement around the dam and its vicinity. Then the specialised work teams will decide for the effective and economic monitoring activities and the implementation of the recommended remedial measures to ensure high standards of safety and security of the large dams and reservoirs. A typical example of specific leakage investigation of la Honda dam is briefly discussed. (Author)

Environmental isotopes and chemistry characterization of the rainfall at the CDTN GNIP Station, MG, Brazil

International Nuclear Information System (INIS)

Cota, Stela; Peixoto, Claudia M.; Dias, Vagner S.; Barreto, Alberto A.; Moreira, Leandro; Palmieri, Helena E.L.

2011-01-01

The International Atomic Energy Agency (IAEA), in collaboration with the Worldwide Meteorological Organization (WMO), for the last 50 years, has been keeping a network of Global Network of Isotopes in Precipitation (GNIP) stations. The main objective is to survey the content of oxygen and hydrogen isotopes in precipitation samples in order to allow the establishment of patterns of temporal and spatial variation of the environmental isotopes as result of natural processes that affect isotope fractionation. Since October/2008, CDTN, as a response to IAEA initiatives for reactivating the Brazilian GNIP program, has started collecting precipitation samples for environmental isotopes analysis. This paper aims to present the lessons-learned of the CDTN (Centro de Desenvolvimento da Tecnologia Nuclear) GNIP Station implementation process, as well as the results of the first year (2008-2009) of sampling. We present the sampling procedure in place at the CDTN GNIP Station, based on the IAEA sampling protocols, and an analysis of the temporal variation of the environmental isotopes in the rainfall in Belo Horizonte. It is also presented the results of a chemical survey of the 2010's precipitation samples in order to assess the chemistry characteristics and quality of the Belo Horizonte precipitation in the CDTN's region. (author)

Pyrite sulfur isotopes reveal glacial-interglacial environmental changes

Science.gov (United States)

Pasquier, Virgil; Sansjofre, Pierre; Rabineau, Marina; Revillon, Sidonie; Houghton, Jennifer; Fike, David A.

2017-06-01

The sulfur biogeochemical cycle plays a key role in regulating Earth’s surface redox through diverse abiotic and biological reactions that have distinctive stable isotopic fractionations. As such, variations in the sulfur isotopic composition (δ34S) of sedimentary sulfate and sulfide phases over Earth history can be used to infer substantive changes to the Earth’s surface environment, including the rise of atmospheric oxygen. Such inferences assume that individual δ34S records reflect temporal changes in the global sulfur cycle; this assumption may be well grounded for sulfate-bearing minerals but is less well established for pyrite-based records. Here, we investigate alternative controls on the sedimentary sulfur isotopic composition of marine pyrite by examining a 300-m drill core of Mediterranean sediments deposited over the past 500,000 y and spanning the last five glacial-interglacial periods. Because this interval is far shorter than the residence time of marine sulfate, any change in the sulfur isotopic record preserved in pyrite (δ34Spyr) necessarily corresponds to local environmental changes. The stratigraphic variations (>76‰) in the isotopic data reported here are among the largest ever observed in pyrite, and are in phase with glacial-interglacial sea level and temperature changes. In this case, the dominant control appears to be glacial-interglacial variations in sedimentation rates. These results suggest that there exist important but previously overlooked depositional controls on sedimentary sulfur isotope records, especially associated with intervals of substantial sea level change. This work provides an important perspective on the origin of variability in such records and suggests meaningful paleoenvironmental information can be derived from pyrite δ34S records.

New technique of insitu soil moisture sampling for environmental isotope analysis applied at 'Pilat-dune' near Bordeaux

International Nuclear Information System (INIS)

Thoma, G.; Esser, N.; Sonntag, C.; Weiss, W.; Rudolph, J.; Leveque, P.

1978-01-01

A new soil-air suction method with soil water vapor adsorption by 4 A-molecular sieve provides soil moisture samples from various depths for environmental isotope analysis and yields soil temperature profiles. A field tritium tracer experiment shows that this insitu sampling method has an isotope profile resolution of about 5-10 cm only. Application of this method in the Pilat sand dune (Bordeaux/France) yielded deuterium and tritium profiles down to 25 meters depth. Bomb tritium measurements of monthly lysimeter percolate samples available since 1961 show that the tritium response has a mean delay of 5 months in case of a sand lysimeter and of 2.5 years for a loess loam lysimeter. A simple HETP model simulates the layered downward movement of soil water and the longitudinal dispersion in the lysimeters. Field capacity and evapotranspiration taken as open parameters yield tritium concentration values of the lysimeters' percolate which are in close agreement with the experimental results. Based on local meteorological data the HETP model applied to tritium tracer experiments in the unsaturated zone further yiels an individual prediction of the momentary tracer position and of the soil moisture distribution. This prediction can be checked experimentally at selected intervals by coring. (orig.) [de

Nuclear techniques for sustainable development: Water resources and monitoring environmental pollution

International Nuclear Information System (INIS)

Danesi, P.R.

1993-01-01

At the IAEA's Laboratories in Seibersdorf and Vienna, Austria, problems of water supply and pollution are some of the important environmental topics that scientists are addressing. Through a broad range of scientific and technical projects and services, the Laboratories develop and transfer technologies with important environmental applications, particularly in developing countries. The broad range of activities include assessments of water resources and their possible contamination, and sensitive analytical studies of toxic metals, pesticides, and other environmental pollutants. The work frequently involves using analytical methods based on radiation and isotopes ranging from neutron activation analysis and X-ray fluorescence to atomic absorption spectrometry and tracer techniques. This article - the second of a two-part series - presents a selective overview of activities at the IAEA's Seibersdorf Laboratories contributing to efforts for a sustainable development. In many cases, the Laboratories serve as the institutional centre for research networks involving scientists at analytical laboratories around the world

Uranium isotopic ratio measurements ({sup 235}U/{sup 238}U) by laser ablation high resolution inductively coupled plasma mass spectrometry for environmental radioactivity monitoring - {sup 235}U/{sup 238}U isotope ratio analysis by LA-ICP-MS-HR for environmental radioactivity monitoring

Energy Technology Data Exchange (ETDEWEB)

David, K.; Mokili, M.B.; Rousseau, G.; Deniau, I.; Landesman, C. [SUBATECH, Ecole des Mines de Nantes, Universite de Nantes, CNRS/IN2P3, 4 rue Alfred Kastler, 44307 Nantes cedex 3 (France)

2014-07-01

The protection of the aquatic and terrestrial environments from a broad range of contaminants spread by nuclear activities (nuclear plants, weapon tests or mining) require continuous monitoring of long-lives radionuclides that were released into the environment. The precise determination of uranium isotope ratios in both natural and potential contaminated samples is of primary concern for the nuclear safeguards and the control of environmental contamination. As an example, analysis of environmental samples around nuclear plants are carried out to detect the traces in the environment originating from nuclear technology activities. This study deals with the direct analysis of {sup 235}U/{sup 238}U isotope ratios in real environmental solid samples performed with laser ablation (LA)-HR-ICP-MS. A similar technique has already been reported for the analysis of biological samples or uranium oxide particles [1,2] but to our knowledge, this was never applied on real environmental samples. The high sensitivity, rapid acquisition time and low detection limits are the main advantages of high resolution ICP-MS for accurate and precise isotope ratio measurements of uranium at trace and ultra-trace levels. In addition, the use of laser ablation allows the analysis of solid samples with minimal preparation. A a consequence, this technique is very attractive for conducting rapid direct {sup 235}U/{sup 238}U isotope ratio analysis on a large set of various matrix samples likely to be encountered in environmental monitoring such as corals, soils, sands, sediments, terrestrial and marine bio-indicators. For the present study, LA-ICP-MS-HR analyses are performed using a New Wave UP213 nano-second Nd:YAG laser coupled to a Thermo Element-XR high resolution mass spectrometer. Powdered samples are compacted with an hydraulic press (5 tons) in order to obtain disk-shaped pellet (10-13 mm in diameter and 2 mm in thickness). The NIST612 reference glass is used for LA-ICP-MS-HR tuning and as

Detection of uranium enrichment activities using environmental monitoring techniques

International Nuclear Information System (INIS)

Belew, W.L.; Carter, J.A.; Smith, D.H.; Walker, R.L.

1993-01-01

Uranium enrichment processes have the capability of producing weapons-grade material in the form of highly enriched uranium. Thus, detection of undeclared uranium enrichment activities is an international safeguards concern. The uranium separation technologies currently in use employ UF 6 gas as a separation medium, and trace quantities of enriched uranium are inevitably released to the environment from these facilities. The isotopic content of uranium in the vegetation, soil, and water near the plant site will be altered by these releases and can provide a signature for detecting the presence of enriched uranium activities. This paper discusses environmental sampling and analytical procedures that have been used for the detection of uranium enrichment facilities and possible safeguards applications of these techniques

Determination of trace quantities of uranium in rocks mass spectrometric isotope dilution technique

International Nuclear Information System (INIS)

Kakazu, Mauricio Hiromitu

1980-01-01

A detailed experimental investigation on the thermionic emission of uranium deposited on a single flat type rhenium filament has been carried out. The study was aimed at determining the influence of various forms of deposition on the emission sensitivity and thermal stability of U + , UO + and UO 2 + ions. Based on these investigations, a technique, involving an addition of a small quantity of colloidal suspension of graphite on top of the uranyl nitrate sample deposited, was chosen because of its higher, emission sensitivity for uranium metal ions. The experimental parameters of the technique were optimised and the technique was employed in the determination of trace quantities of uranium in rock samples using mass spectrometric isotope dilution method. For the mass spectrometric isotope dilution analysis National Bureau of Standards uranium isotopic standard NBS-U 970 was employed as a tracer, where as the mass discrimination effect in the uranium isotope analysis was corrected using the uranium isotopic standard NBS-U500. Uranium was determined in each of the seven granite samples from Wyoming, USA and two USGS standard rocks. The precision of the analysis was found to be ±1% . The uranium values obtained on the rock samples were compared with the analyses of other investigators. Influence of the sample splitting on the uranium analysis was discussed in the light of the analytical results obtained.(author)

The Helikon technique for isotope enrichment

International Nuclear Information System (INIS)

Haarhoff, P.C.

1976-11-01

The separating element employed in the UCOR process for uranium enrichment has an enriched stream which is much smaller than the depleted stream. To deal with this small cut and to exploit the full potential of the process, a new cascade technique has been developed, the so-called helikon technique. It is based on the principle that an axial flow compressor can simultaneously compress a number of streams of different isotopic composition, which flow through it in parallel, without any significant mixing between them. The technique makes it possible to achieve the desired enrichment with a relatively small number of separating units, by making the best use of the high enrichment factor available. A further feature of the helikon technique is that a module yields an enrichment factor which is not constant, but can vary. In this way a cascade can be built up from modules of a fixed size, which is a great advantage when compared to conventional cascade arrangements where several unit sizes are required. A general theoretical treatment of the helikon technique is given and the similarity between helikon and conventional cascades is pointed out. Practical helikon cascades are subsequently discussed on the basis of the UCOR process

Environmental isotope and hydrochemical investigation of Bauru and Botucatu groundwaters, Parana basin, Brazil

International Nuclear Information System (INIS)

Kimmelmann, A.

1991-06-01

A combined hydrogeochemical and environmental isotope investigation is being carried out in the Bauru- and Botucatu groundwaters. Based on former isotope data, the 2 H/ 18 O-, 3 H-, 13 C-, 14 C- and 3 He/ 4 He-contents of representative groundwaters out from the Bauru- and Botucatu-aquifer are now investigated to reveal a possible interaction of the groundwater systems and to correlate 14 C-groundwater residence times with groundwater ages derived from other isotope methods. (author)

The contribution of environmental isotopes to studies of large aquifers in Morocco

International Nuclear Information System (INIS)

Kabbaj, A.; Zeryouhi, I.; Carlier, Ph.

1979-01-01

The geochemistry of environmental isotopes has been used for the study of various aquifers in Morocco, some of which are large, such as the Charf el Akab in the Tangiers area, the Oum er Rbia basin and the Turonian aquifer of the Tadla, the free groundwater of the Quaternary lacustrine limestones of the Sais Plain and the Lias limestone aquifer. These isotope studies take hydrogeochemical data into account and have made it possible to determine the conditions of recharge of the aquifers, to distinguish waters of different origin from the Atlas Mountains or from the Phosphate Plateau in the Tadla Basin and the Sais plain, to estimate the recharge of one aquifer by another - for example groundwater of the Lias limestones passing via the folds of the Sais Plain into the lacustrine limestone aquifer - and to test the homogeneity or heterogeneity of these aquifers and their tightness (e.g. the Turonian aquifer of the Tadla and the special case of the Charf el Akab in relation to the marine environment). Altogether, these results made it possible to test the value of the techniques used and to specify the general conditions in which they can profitably be used. (author)

Analytical techniques for determination of framework oxygen isotope ratio of wairakite

International Nuclear Information System (INIS)

Noto, Masami; Kusakabe, Minoru; Uchida, Tetsuo.

1990-01-01

Dehydration techniques were developed for the analysis of isotopic ratios of framework oxygen of wairakite, one of calcium zeolites often encountered in geothermal systems. Channel water in wairakite were separated from aluminosilicate framework by dehydration in vacuum at 300 deg, 400 deg, 450 deg, 500 deg, 550 deg, 650 deg, 750 deg, 850 deg, and 950 degC, and by stepwise heating at temperatures from 300 deg to 700 degC. The oxygen isotopic analyses of the separated channel water and the residual aluminosilicate framework of wairakite indicated that dehydration at temperatures higher than 400 degC is accompanied by isotopic exchang between the framework oxygen and dehydrating water vapor. The isotopic exchange during the high temperature dehydration makes the δ 18 O of framework oxygen lower and that of channel water higher than those obtained by dehydration at 300 degC. These results are consistent with dehydration behavior of wairakite under vacuum that the maximum rate of dehydration of channel water is attained at about 400 degC. Consequently it is recommended to dehydrate wairakite at a temperature as low as possible in order to avoid the effect of the isotopic exchange. Time required to attain complete dehydration becomes longer with lowering the temperature of dehydration. To compromise these conflicting effects, the optimum conditions of dehydration have been found that most of the channel water is dehydrated at 300 degC for 24 hours, followed by stepwise heating for additional 17 hours up to 700 degC. We obtained a better than ± 0.1 reproducibility for the framework oxygen isotopic determinations with this technique. (author)

The A.B.Cs of isotope hydrology

International Nuclear Information System (INIS)

Maduabuchi, C.

2000-01-01

The steady growth in world population coupled with the extension of irrigated agriculture and accelerated industrial development and other economic activities have put tremendous stress on the quantity and quality aspects of surface and groundwater resources the world over. The situation calls for necessary monitoring mechanism to safeguard these renewable but potentially depletable resources. A proper understanding of water resources systems is a prerequisite to their sustainable development. This informed the application of isotope techniques in hydrology as they provide vital information that are not readily obtainable from the classical hydrological techniques. These include issues relating to origin and history of groundwater, recharge estimates, vulnerability of aquifers to pollution, mixing proportion of component flows and study of geothermal systems amongst others. Maximum benefits are derived from the application of isotope techniques when they are complemented with conventional techniques in an integrated manner. The paper discusses the basic concepts which include configuration of the nucleus of the atom, isotopes, radioactivity and radioactive decay law. It further explains the occurrence of environmental isotopes including their measurement in natural compounds and the general application of isotopes in water resources development and management

Analytical Methodology for the Determination of Radium Isotopes in Environmental Samples

International Nuclear Information System (INIS)

2010-01-01

Reliable, comparable and 'fit for purpose' results are an essential requirement for any decision based on analytical measurements. For the analyst, the availability of tested and validated analytical procedures is an extremely important tool for production of such analytical measurements. For maximum utility, such procedures should be comprehensive, clearly formulated, and readily available to both the analyst and the customer for reference. Since 2004, the environment programme of the IAEA has included activities aimed at the development of a set of procedures for the determination of radionuclides in terrestrial environmental samples. Measurements of radium isotopes are important for radiological and environmental protection, geochemical and geochronological investigations, hydrology, etc. The suite of isotopes creates and stimulates continuing interest in the development of new methods for determination of radium in various media. In this publication, the four most routinely used analytical methods for radium determination in biological and environmental samples, i.e. alpha spectrometry, gamma spectrometry, liquid scintillation spectrometry and mass spectrometry, are reviewed

Efficacy of passive sampler collection for atmospheric NO2 isotopes under simulated environmental conditions.

Science.gov (United States)

Coughlin, Justin G; Yu, Zhongjie; Elliott, Emily M

2017-07-30

Nitrogen oxides or NO x (NO x = NO + NO 2 ) play an important role in air quality, atmospheric chemistry, and climate. The isotopic compositions of anthropogenic and natural NO 2 sources are wide-ranging, and they can be used to constrain sources of ambient NO 2 and associated atmospheric deposition of nitrogen compounds. While passive sample collection of NO 2 isotopes has been used in field studies to determine NO x source influences on atmospheric deposition, this approach has not been evaluated for accuracy or precision under different environmental conditions. The efficacy of NO 2 passive sampler collection for NO 2 isotopes was evaluated under varied temperature and relative humidity (RH) conditions in a dynamic flux chamber. The precision and accuracy of the filter NO 2 collection as nitrite (NO 2 - ) for isotopic analysis were determined using a reference NO 2 gas tank and through inter-calibration with a modified EPA Method 7. The bacterial denitrifer method was used to convert 20 μM of collected NO 2 - or nitrate (NO 3 - ) into N 2 O and was carried out on an Isoprime continuous flow isotope ratio mass spectrometer. δ 15 N-NO 2 values determined from passive NO 2 collection, in conditions of 11-34 °C, 1-78% RH, have an overall accuracy and precision of ±2.1 ‰, and individual run precision of ±0.6 ‰. δ 18 O-NO 2 values obtained from passive NO 2 sampler collection, under the same conditions, have an overall precision of ± 1.3 ‰. Suitable conditions for passive sampler collection of NO 2 isotopes are in environments ranging from 11 to 34 °C and 1 to 78% RH. The passive NO 2 isotope measurement technique provides an accurate method to determine variations in atmospheric δ 15 N-NO 2 values and a precise method for determining atmospheric δ 18 O-NO 2 values. The ability to measure NO 2 isotopes over spatial gradients at the same temporal resolution provides a unique perspective on the extent and seasonality of fluctuations in atmospheric NO 2

Sediment Origin Determination in the Sub-Catchment of Mistelbach (Austria) using Fatty Acids Biomarkers and Compound-Specific Stable Isotope Techniques

International Nuclear Information System (INIS)

Mabit, L.; Chen, X.; Resch, C.; Toloza, A.; Meusburger, K.; Alewell, C.; Gibbs, M.; Klik, A.; Eder, A.; Strauss, P.

2016-01-01

Compound-specific stable isotope (CSSI) signatures of inherent soil organic biomarkers allow discriminating and apportioning the source of soil contribution from different land uses. Plant communities label the soil where they grow by exuding organic biomarkers. Although all plants produce the same biomarkers, the stable isotopic signature of those biomarkers is different for each plant species. For agri-environmental investigations, the CSSI technique is based on the measurement of carbon-13 ( 13 C) natural abundance signatures of specific organic compounds such as natural fatty acids (FAs) in the soil. By linking fingerprints of land use to the sediment in deposition zones, this approach has been shown to be a useful technique for determining the source of eroded soil and thereby identifying areas prone to soil degradation. The authors have used this innovative technique to investigate a 3 hectares sub-catchment of Mistelbach situated 60 km north of Vienna. Using the 137 Cs technique, Mabit et al. (2009) reported a local maximum sedimentation rate reaching 20 to 50 t ha -1 yr -1 in the lowest part of this Austrian catchment. To test the ability of the CSSI technique to discriminate different sediment sources of these deposited sediments, representative soil samples from four main agricultural fields of the site were analyzed

Dual-isotope technique for determination of in vivo ketone body kinetics

International Nuclear Information System (INIS)

Miles, J.M.; Schwenk, W.F.; McClean, K.L.; Haymond, M.W.

1986-01-01

Total ketone body specific activity has been widely used in studies of ketone body metabolism to circumvent so-called isotope disequilibrium between the two major ketone body pools, acetoacetate and beta-hydroxybutyrate. Recently, this approach has been criticized on theoretical grounds. In the present studies, [13C]acetoacetate and beta-[14C]hydroxybutyrate were simultaneously infused in nine mongrel dogs before and during an infusion of either unlabeled sodium acetoacetate or unlabeled sodium beta-hydroxybutyrate. Ketone body turnover was determined using total ketone body specific activity, total ketone body moles % enrichment, and an open two-pool model, both before and during the exogenous infusion of unlabeled ketone bodies. Basal ketone body turnover rates were significantly higher using [13C]acetoacetate than with either beta-[14C]hydroxybutyrate alone or the dual-isotope model (3.6 +/- 0.5 vs. 2.2 +/- 0.2 and 2.7 +/- 0.2 mumol X kg-1 X min-1, respectively, P less than 0.05). During exogenous infusion of unlabeled sodium acetoacetate, the dual-isotope model provided the best estimate of ketone body inflow, whereas 14C specific activity underestimated the known rate of acetoacetate infusion by 55% (P less than 0.02). During sodium beta-hydroxybutyrate infusion, [13C]-acetoacetate overestimated ketone body inflow by 55% (P = NS), while better results were obtained with 14C beta-hydroxybutyrate alone and the two-pool model. Ketone body interconversion as estimated by the dual-isotope technique increased markedly during exogenous ketone body infusion. In conclusion, significant errors in estimation of ketone body inflow were made using single-isotope techniques, whereas a dual-isotope model provided reasonably accurate estimates of ketone body inflow during infusion of exogenous acetoacetate and beta-hydroxybutyrate

SIMSISH technique does not alter the apparent isotopic composition of bacterial cells.

Directory of Open Access Journals (Sweden)

Olivier Chapleur

Full Text Available In order to identify the function of uncultured microorganisms in their environment, the SIMSISH method, combining in situ hybridization (ISH and nanoscale secondary ion mass spectrometry (nanoSIMS imaging, has been proposed to determine the quantitative uptake of specific labelled substrates by uncultured microbes at the single cell level. This technique requires the hybridization of rRNA targeted halogenated DNA probes on fixed and permeabilized microorganisms. Exogenous atoms are introduced into cells and endogenous atoms removed during the experimental procedures. Consequently differences between the original and the apparent isotopic composition of cells may occur. In the present study, the influence of the experimental procedures of SIMSISH on the isotopic composition of carbon in E. coli cells was evaluated with nanoSIMS and compared to elemental analyser-isotopic ratio mass spectrometer (EA-IRMS measurements. Our results show that fixation and hybridization have a very limited, reproducible and homogeneous influence on the isotopic composition of cells. Thereby, the SIMSISH procedure minimizes the contamination of the sample by exogenous atoms, thus providing a means to detect the phylogenetic identity and to measure precisely the carbon isotopic composition at the single cell level. This technique was successfully applied to a complex sample with double bromine - iodine labelling targeting a large group of bacteria and a specific archaea to evaluate their specific (13C uptake during labelled methanol anaerobic degradation.

SIMSISH Technique Does Not Alter the Apparent Isotopic Composition of Bacterial Cells

Science.gov (United States)

Chapleur, Olivier; Wu, Ting-Di; Guerquin-Kern, Jean-Luc; Mazéas, Laurent; Bouchez, Théodore

2013-01-01

In order to identify the function of uncultured microorganisms in their environment, the SIMSISH method, combining in situ hybridization (ISH) and nanoscale secondary ion mass spectrometry (nanoSIMS) imaging, has been proposed to determine the quantitative uptake of specific labelled substrates by uncultured microbes at the single cell level. This technique requires the hybridization of rRNA targeted halogenated DNA probes on fixed and permeabilized microorganisms. Exogenous atoms are introduced into cells and endogenous atoms removed during the experimental procedures. Consequently differences between the original and the apparent isotopic composition of cells may occur. In the present study, the influence of the experimental procedures of SIMSISH on the isotopic composition of carbon in E. coli cells was evaluated with nanoSIMS and compared to elemental analyser-isotopic ratio mass spectrometer (EA-IRMS) measurements. Our results show that fixation and hybridization have a very limited, reproducible and homogeneous influence on the isotopic composition of cells. Thereby, the SIMSISH procedure minimizes the contamination of the sample by exogenous atoms, thus providing a means to detect the phylogenetic identity and to measure precisely the carbon isotopic composition at the single cell level. This technique was successfully applied to a complex sample with double bromine – iodine labelling targeting a large group of bacteria and a specific archaea to evaluate their specific 13C uptake during labelled methanol anaerobic degradation. PMID:24204855

Separation and sampling technique of light element isotopes by chemical exchange process

International Nuclear Information System (INIS)

Kato, Shunsaku; Oi, Kenta; Takagi, Norio; Hirotsu, Takafumi; Kano, Hirofumi; Sonoda, Akinari; Makita, Yoji

2000-01-01

Lithium and boron isotope separation technique were studied. Granulation of lithium isotope separation agent was carried out by cure covering in solution. Separation of lithium isotope was stepped up by ammonium carbonate used as elusion agent. Styrene and ester resin derived three kinds of agents such as 2-amino-1, 3-propanediol (1, 3-PD), 2-amino-2-methyl-1, 3-propanediol (Me-1,3-PD) and tris(2-hydroxyethyl)amine (Tris) were used as absorbent.The ester resin with Tris showed larger amount of adsorption (1.4 mmol/g) than other resins. However, all resins with agent indicated more large adsorption volume of boron than the objective value (0.5 mmol/g). Large isotope shift was shown by the unsymmetrical vibration mode of lithium ion on the basis of quantum chemical calculation of isotope effect on dehydration of hydrated lithium ion. (S.Y.)

Environmental isotope investigation of groundwaters in the region of Taiyuan, Shanxi Province of China

International Nuclear Information System (INIS)

Wei Keqin; Lin Ruifen; Wang Zhixiang

1988-01-01

A comprehensive environmental isotope investigation of several complex groundwater systems and the mixing of groundwater with surface water in the region of Taiyuan, Shanxi Province of China, is presented. Environmental isotopes, including stable isotopes, tritium and uranium series in water and its activity ratio 234 U/ 238 U are applied to divide karstic groundwaters into separate Xishan and Dongshan systems. The Xishan karstic water system shows a great scattering of isotope data. This results from the mixing of karstic groundwater and surface water from the Fenhe River. The Dongshan system is homogeneous and karstic water is tritium free and its age should be more than 50-100 a. The increase in uranium activity ratio, which is correlated with the length of the flow paths, shows the run-off direction of the Dongshan karstic water system towards the major natural outlet, the Lancun Spring. The altitudes of recharge of Xishan and Dongshan karstic waters are evaluated as 1400 m and 1300 m, respectively. The ages of fissure groundwaters in metamorphic rocks are determined in terms of their tritium content. Some practical considerations upon groundwater management are also drawn from isotope results. (author). 9 refs, 10 figs, 9 tabs

Root activity evaluation in tree crops using isotopic techniques

International Nuclear Information System (INIS)

Calvache, Marcelo

1991-01-01

This paper discusses the methdology used to evalute root activity of the crops utilizing the technique of soil injection with solutions marked with isotopes. Some of the experimental data obtained with coffee, citrus and oil palm are also presented. Ovel all, these tree crops present a higher root activity in soil layers close to the surface (0-20 cm) and to a distance from the trunk which varies with age, season and variety. The most important conclusions are: 1. The isotope injection technique using 3 2 P , 1 5 N , or 8 5 R b, allow direct and reliable determination of root activity in these tree crops. 2. Root activity of three crops depends on age of the tree, variety, moisture content of the soil and soil type. 3. Soil moisture is the most influencial factor affecting root activity. This is turn depends on the irrigation method employed. 4. From the practical view point, the best distance from the trunk to apply fertilizer in the one wich has highest root activity closest to the soil surface

Geothermal investigations with isotope and geochemical techniques in Latin America

International Nuclear Information System (INIS)

1992-03-01

The IAEA Co-ordinated Research Programme (CRP) for Latin America on the Use of Isotope and Geochemical Techniques in Geothermal Exploration started in 1984. The first activity carried out was a Seminar on isotope and geochemical techniques in geothermal exploration, which took place in June 1984 in Morelia, Mexico. During the seminar, which was attended by representatives of the institutions which later took part in the programme, the objectives, main research lines, and geothermal fields to be studied during the CRP were discussed. The first research contracts were awarded towards the end of 1984. The field work started in 1985 and continued through 1990. During the implementation of the CRP a considerable number of geothermal fields were studied in the nine participating countries. The investigations carried out were geochemically quite comprehensive in most cases, but in some others they were still in a reconnaissance stage when the CRP ended: the latter studies are not reported in these proceedings, but the data obtained are in principle available from the relevant national institutions. While investigations with conventional geochemical techniques had already started in several fields before 1985, isotope methods were applied for the first time in all cases during this CRP. Due to the remoteness and high elevation of many of the fields studied and the adverse meteorological conditions during long periods of the year, the investigations could not proceed rapidly: this is the main reason for the unusually long duration of the CRP, which could be concluded only after more than five years after its inception

Environmental isotope profiles and evaporation in shallow water table soils

International Nuclear Information System (INIS)

Hussein, M.F.; Froehlich, K.; Nada, A.

2001-01-01

Environmental isotope methods have been employed to evaluate the processes of evaporation and soil salinisation in the Nile Delta. Stable isotope profiles (δ 18 O and δ 2 H) from three sites were analysed using a published isothermal model that analyses the steady-state isotopic profile in the unsaturated zone and provides an estimate of the evaporation rate. Evaporation rates estimated by this method at the three sites range between 60 and 98 mm y -1 which translates to an estimate of net water loss of one billion cubic meters per year from fallow soils on the Nile delta. Capillary rise of water through the root zone during the crop growing season is estimated to be three times greater than evaporation rate estimate and a modified water management strategy could be adopted in order to optimize water use and its management on the regional scale. (author)

Use of environmental isotopes to investigate the interconnections between the Reno River and groundwater (Northern Italy)

International Nuclear Information System (INIS)

Carlin, F.; Magri, G.

1975-01-01

This research is part of the investigations carried out to assess the environmental impact of the Brasimone site in the upper reaches of the Reno River, where a nuclear research plant is under construction. This plant might imply a risk of contamination of the Reno River water by radioactive wastes. Environmental isotope techinques were used to study the interconnections between the Reno River and groundwater and qualitatively to define the flow dynamics between the surface waters and groundwater in the area of Bologna. The Reno River flows across an aquifer consisting of an irregular succession of alluvial beds of sandy gravel, sands and clayey or sandy silts of varying thicknesses. At the two pumping stations of Borgo Panigale and Tiro a Segno, the tritium and 14 C contents of the groundwater regularly decrease with increasing distance from the Reno River. This indicates that there is a contribution of recent water recharged fron the river, and that such a contribution is higher in Borgo Panigale than in Tiro a Segno. At the pumping station of San Vitale di Reno, only recently put into operation and at a distance from the river greater than that of the other two stations, there is no indication of recharge of recent river water. Stable isotopes also show a slight variation with the distance from the river, in agreement with the fact that deep groundwater is a mixture in variable proportions of two components, one of them originating from the river. All these results were possible to achieve only by means of nevironmental isotope techniques. (author)

Review Article : Utilization of Environmental Radiochemistry Techniques for Selection and Evaluation of Nuclear Facility Sites

International Nuclear Information System (INIS)

Atta, E.R.; Madbouly, A.M.; Zakaria, Kh.M.

2016-01-01

This research review puts necessary considerations on the available environmental radiochemistry techniques for selection and evaluation of a nuclear facility sites.The main bjective in site evaluation for nuclear facilities in terms of nuclear safety is to protect the site workers, the public and the environment from the effects of ionizing radiation release from nuclear facilities due to accidents. The extreme sensitivity and speed of radiochemical methods make their applications of considerable importance in several fields and they have found many uses. Information about the existed radioactivity in the different nuclear facilities is an essential requirement for their environmental assessment. It is necessary to estimate the various radioactivity levels in the environment through qualitative and quantitative analytical techniques and to assess the potential effects of the nuclear facility in the region by considering the characteristics of sites.The siting and site evaluation requirements are discussed. Emphasis was given to types of radiochemical techniques used for characterization of the site parameters which determine the potential hazards of the site on the facility and the facility on the site. Emphasis has been also given to the quantitative and qualitative analysis of naturally occurring radionuclides for monitoring and control .There are some techniques employed such as radioactive tracer technique, liquid scintillation technique, gamma spectrometry technique, neutron activation analysis technique, fluorimetric technique and isotope hydrology technique.

Carbon, hydrogen oxygen isotope studies on imbedded old tree ring and paleoclimate reconstruction

International Nuclear Information System (INIS)

Sun Yanrong; Mu Zhiguo; Cui Haiting

2002-01-01

Tree ring is a kind of natural archives, on which the isotopic analysis is important to study global climate and environmental change. The authors mainly provide a comprehensive introduction to the fractionation models of carbon, hydrogen and oxygen isotope in plants, their research technique and the extract methods from cellulose. That results show isotopic tracer can record the message of climatic variation and has become a powerful tool for paleoclimate reconstruction and for the modern environment changing research. Especially studying on PAGES. the cellulose isotopic analyses of imbedded old tree ring have become the mainly quantitative means of environmental evolvement. In addition, China is a typical monsoon country, research in tree ring stable isotope seasonal variation can give a lot of important information on that. Up to now, the research techniques and works on tree ring in China are still in its earlier stage, and remain many limitations. It needs further accumulate basic research materials, intensity regional contrast and intercross studies on relative subjects

Nuclear techniques in groundwater hydrology and their application in the country

International Nuclear Information System (INIS)

Raju, K.C.B.

1982-01-01

Two main branches of isotope hydrology, namely, environmental isotope hydrology and artificial isotope hydrology are briefly described. At present these techniques are used in a limited way in India. Some of the applications of these techniques in India are mentioned. They include: (1) dating of groundwater, (2) determining recharge values of formations, and (3) studying flow characteristics of acquifers. (M.G.B.)

Isotope techniques in human studies of zinc nutrition. Report of an IAEA consultants' meeting

International Nuclear Information System (INIS)

1997-01-01

A Consultants' Meeting was convened by the IAEA in November 1996 to review current knowledge of the role of zinc in human nutrition - with particular reference to (1) relevant public health issues in developing countries, and (2) the role that isotope techniques can play in increasing our understanding of some of these matters. More specifically, the Consultants Group was invited to advise the Agency on its future programmes in this area. It was concluded that there is now abundant scientific evidence that zinc deficiency of nutritional origin is a widespread phenomenon with important health consequences, particularly in developing countries. Even mild zinc deficiency is now thought to contribute to pregnancy complications, low birth weight, impaired immune competence, maternal and infant mortality and morbidity, and growth failure in infancy and childhood. Hence zinc deficiency may have far-reaching consequences for maternal, infant and child health in many developing countries. Isotope techniques - mainly using stable isotopes of zinc, but in some cases using radioisotopes - provide many possibilities 'for improving our understanding of the basic biochemical and metabolic functions of zinc, and for increasing our knowledge of the roles of this essential micronutrient in human nutrition. Through the use of isotope techniques, we may also expect to be better able to assess, and to increase, the efficacy of dietary and other intervention programmes designed to improve the nutritional status of developing country populations whose intakes are below the levels needed to achieve optimal health. This report briefly reviews some of these isotope techniques and makes recommendations on their use in IAEA research and technical co-operation programmes

Isotope techniques in human studies of zinc nutrition. Report of an IAEA consultants` meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

A Consultants` Meeting was convened by the IAEA in November 1996 to review current knowledge of the role of zinc in human nutrition - with particular reference to (1) relevant public health issues in developing countries, and (2) the role that isotope techniques can play in increasing our understanding of some of these matters. More specifically, the Consultants Group was invited to advise the Agency on its future programmes in this area. It was concluded that there is now abundant scientific evidence that zinc deficiency of nutritional origin is a widespread phenomenon with important health consequences, particularly in developing countries. Even mild zinc deficiency is now thought to contribute to pregnancy complications, low birth weight, impaired immune competence, maternal and infant mortality and morbidity, and growth failure in infancy and childhood. Hence zinc deficiency may have far-reaching consequences for maternal, infant and child health in many developing countries. Isotope techniques - mainly using stable isotopes of zinc, but in some cases using radioisotopes - provide many possibilities `for improving our understanding of the basic biochemical and metabolic functions of zinc, and for increasing our knowledge of the roles of this essential micronutrient in human nutrition. Through the use of isotope techniques, we may also expect to be better able to assess, and to increase, the efficacy of dietary and other intervention programmes designed to improve the nutritional status of developing country populations whose intakes are below the levels needed to achieve optimal health. This report briefly reviews some of these isotope techniques and makes recommendations on their use in IAEA research and technical co-operation programmes

135Cs/137Cs isotopic composition of environmental samples across Europe: Environmental transport and source term emission applications

International Nuclear Information System (INIS)

Snow, Mathew S.; Snyder, Darin C.

2016-01-01

135 Cs/ 137 Cs isotopic analyses represent an important tool for studying the fate and transport of radiocesium in the environment; in this work the 135 Cs/ 137 Cs isotopic composition in environmental samples taken from across Europe is reported. Surface soil and vegetation samples from western Russia, Ukraine, Austria, and Hungary show consistent aged thermal fission product 135 Cs/ 137 Cs isotope ratios of 0.58 ± 0.01 (age corrected to 1/1/15), with the exception of one sample of soil-moss from Hungary which shows an elevated 135 Cs/ 137 Cs ratio of 1.78 ± 0.12. With the exception of the outlier sample from Hungary, surface soil/vegetation data are in quantitative agreement with values previously reported for soils within the Chernobyl exclusion zone, suggesting that radiocesium at these locations is primarily composed of homogenous airborne deposition from Chernobyl. Seawater samples taken from the Irish Sea show 135 Cs/ 137 Cs isotope ratios of 1.22 ± 0.11 (age corrected to 1/1/15), suggesting aged thermal fission product Cs discharged from Sellafield. The differences in 135 Cs/ 137 Cs isotope ratios between Sellafield, Chernobyl, and global nuclear weapons testing fallout indicate that 135 Cs/ 137 Cs isotope ratios can be utilized to discriminate between and track radiocesium transport from different nuclear production source terms, including major emission sources in Europe. - Highlights: • 135 Cs/ 137 Cs useful for tracking anthropogenic environmental radiocesium releases. • European surface soils/vegetation have uniform ratio consistent with Chernobyl. • 135 Cs/ 137 Cs in Irish sea represents thermal fission ratio distinct from Chernobyl. • Can distinguish between major source terms in Europe based on 135 Cs/ 137 Cs.

Nuclear techniques in hydrology

International Nuclear Information System (INIS)

Bahadur, J.; Saxena, R.K.

1974-01-01

Several types of sealed radioactive sources, stable isotopes and water soluble radioactive tracers, used by different investigators, have been listed for studying the dynamic behaviour of water in nature. In general, all the facets of hydrological cycle, are amenable to these isotopic techniques. It is recommended that environmental isotopes data collection should be started for studying the water balance and also the interrelationships between surface and subsurface water in various rivers catchments with changing physical, geological and climatic parameters. (author)

Isotope dilution surface ionization mass spectrometry of silver in environmental materials

Energy Technology Data Exchange (ETDEWEB)

Murozumi, M; Nakamura, S; Suga, K [Muroran Inst. of Tech., Hokkaido (Japan)

1981-03-01

Surface ionization mass spectrometry has been developed to measure isotopic abundances and concentrations of silver in commercial high-purity metals, environmental materials such as rocks and plants, and /sup 109/Ag and /sup 107/Ag spikes. A minute amount of silver is extracted into a dithizone chloroform solution from a nitric acid solution of above samples. After the silver is back-extracted into 6.0 ml of a 7 mol/l HNO/sub 3/ solution, the solution is evaporated to dryness under the nitrogen atmosphere. Silver nitrate thus formed is dissolved in a mixture of 60 ..mu..l of an 0.003% silica gel suspended water and 5 ..mu..l of a 2% phosphoric acid. An aliquot of this solution is applied to the mass spectrometry using a rhenium single filament as an ion emitter. The proposed method can detect the presence of 10/sup -14/ g of silver on the ion emitter, and measure the /sup 109/Ag//sup 107/Ag isotopic ratio in environmental materials with the accuracy of 0.1 -- 0.2% in the coefficient of variation. Isotope dilution mass spectrometry using a /sup 107/Ag spike has revealed the silver concentration in the environmental standard materials, which were prepared by the National Bureau of Standards, U.S.A. and National Institute of Environmental Studies of Japan, as follows; 27.9 +- 0.2 ppb for the Orchard Leaves and 34.3 +- 0.3 ppb in the Pepper Bush. The determined values of silver in the Granodiorite, JG-1, and Basalt, JB-1 powders made by the Geological Survey of Japan are 25.4 +- 0.4 ppb and 41.3 +- 0.1 ppb respectively. Silver concentration in a coastal sea water sample is found to be at the level of 2.5 +- 0.4 ppt.

Environmental isotope study of a groundwater supply project in the Kalahari of Gordonia

International Nuclear Information System (INIS)

Verhagen, B.T.

1984-01-01

A feasibility study for a central fresh groundwater supply scheme in the Kalahari of the Gordonia district, South Africa, provided the opportunity to study fresh and saline water occurrences in detail with environmental isotopes. The isotopic and chemical signals show a clear contrast among groundwaters below a river bed, an extended fresh groundwater body and saline groundwaters in close proximity to the river. Carbon-14, tritium and stable-isotope data lead to a vertical rain recharge model rather than a regional flow mechanism for an understanding of the various water occurrences, their interrelationships and varied hydrochemistry. (author)

Application of radioisotope techniques in analysis of environmental pollutants

International Nuclear Information System (INIS)

Kyrs, M.; Moravec, A.

1984-01-01

A survey is tabulated of the use of radioisotope techniques, giving the detected pollutant and the sensitivity and accuracy of the method. The most frequently used principle is the substoichiometric variant of isotope dilution which may be divided into the method of isotope dilution and the radio-reagent method. Both methods are described and examples are given of the determination of pollutants. (J.P.)

Nuclear and isotopic techniques for addressing nutritional problems, with special reference to current applications in developing countries.

Science.gov (United States)

Iyengar, Venkatesh

2002-03-01

Nuclear and isotopic techniques are valuable tools in human nutritional research studies. Isotopes, both radioactive and nonradioactive, enable detailed evaluations of nutrient intake, body composition, energy expenditure, status of micronutrients, and nutrient bioavailability. In recent times, isotopic methods have been widely used in a number of coordinated research projects and technical cooperation projects of the International Atomic Energy Agency's Nutrition Programme. The doubly labeled water technique combines the use of the stable isotopes oxygen-18 and hydrogen-2 (deuterium) to measure total energy expenditure in free-living human subjects, and to investigate the magnitude and causes of both undernutrition and the emergence of obesity in developing countries. The deuterium dilution technique is a reliable tool to measure breastmilk intake and thereby infant growth and development. In collaboration with the World Health Organization's Growth Monitoring Program, this technique is being used to generate new data on growth standards for children in developing countries. This technique is also used in the measurement of body composition by the estimation of lean body mass and fat mass in individuals. Stable isotopes of iron and zinc have been successfully used to assess the nutritional impact of several nationwide food supplementation-programs conducted on pregnant and lactating women and children in both industrialized and developing countries. Isotopic techniques are especially suitable for monitoring changes in body composition, energy metabolism, and mineral status (with particular reference to osteoporosis) in the elderly. Nuclear methods have also served to develop models for a physiological reference man in Asia in support of radiological health and safety issues, for establishing elemental composition of foods, and for measurement of pollutants in the environment.

Groundwater problems studies in the Thar desert, India, using isotope techniques

International Nuclear Information System (INIS)

Navada, S.V.

1999-01-01

In groundwater management, particularly in arid regions like western Rajasthan, it is important to know the presence of modern recharge and to estimate the recharge rate to avoid over-exploitation of the groundwater resource. Isotopes can help to identify modern recharge and to estimate recharge rate to the aquifer. If modern recharge is absent, groundwater dating using radiocarbon could help to identify old groundwater or paleowaters. A number of isotope studies carried out in arid zones (particularly in the Sahara) have shown that the deep groundwater is generally very old. From these studies it was concluded that episodic large scale recharge corresponding to humid phases or pluvials occurred in these arid areas. The paper reviews our experiences on the application of isotope techniques in understanding groundwater recharge process in and western Rajasthan

Application of isotope techniques in hydrology. A comprehensive report from a panel

International Nuclear Information System (INIS)

1962-01-01

Tracers for water are not a new innovation in hydrology, but have been used on a rather limited scale in the past for various purposes. For instance various dyes or salts have been used in tracing underground water in karstic limestone areas and for computing discharge rates of small turbulent rivers like mountain streams. There are, however, several limitations to their use. Dyes employed in tracing underground water are often sorbed by the ground and hence results are qualitative. For discharge measurements in streams the amount of salt needed limits the method to small streams. With the advance of nuclear science, suitable radioactive, isotopes became available which, because of the sensitivity of their detection, could be added in relatively small amounts. Also, when tritium was discovered, it was realized that it is an ideal tracer for water as it can be incorporated into the water molecule. During recent years fractionation effects have been discovered in several stable isotopes present in water which seem promising as tools for obtaining useful hydrological information, especially on the origin of water. Finally, with the discovery of cosmic-ray-produced radioactive isotopes, especially tritium, a method has been found for determining the age of groundwater which is of great value for estimating the age and hence the recharge-rates of groundwater bodies. There is thus, at present, a great variety of isotope techniques available, some of them in the development stage, others more or less ready for application. These various techniques will be discussed below. The presentation of the information follows the pattern envisaged by the Panel. Thus, for each chapter the problem is first presented and then followed by a section called 'discussion' which summarizes the information given by the Panel members and also expresses their opinions. Finally, a section called 'conclusions and recommendations' sums up the present situation and the need for further development

Study the mechanisms of recharge of the phreatic aquifers, south east egypt, using environmental isotopes and hydro geochemistry

International Nuclear Information System (INIS)

Hassan, T.M.; Awad, M.A.; Hamza, M.S.

1994-01-01

The recharge rate is the most critical factor to groundwater resources management especially in semi-arid and arid areas. This paper presents a study on the feasibility of a groundwater development plan for south east egypt area. Environmental stable isotopes (oxygen-18 and deuterium), and hydro geochemistry techniques were used to investigate the recharge sources of groundwater. The examined groundwater wells tap the quaternary, basement and Nubian sandstone aquifers. The isotopic compositions of these groundwater samples indicate that there is a mixing among three different sources of recharge, local precipitation, palaeo water and sea water intrusion along the coastal plain, from the hydrochemical point of view, the predominant water types reflect meteoric, as well as marine waters genesis. The changes in salinity depend upon the dissolution of terrestrial salts, distance from the catchment area and seepage from deep aquifers. 7 figs., 2 tabs

Determination of the replenishment mechanism in the Los naranjos zone, Mexico, by the use of environmental isotopic techniques

International Nuclear Information System (INIS)

Payne, B.R.; Sainz O, I.

1977-01-01

The aquifers of the Los Naranjos Zone in the State of Veracruz have two principal sources of replenishment: the infiltration of the waters of the Rio Blanco along its channel. Granted that the eventual control of the waters of the Rio Blanco is capable of seriously affecting the exploitation of subterranean waters which is being implanted, it becomes necessary to learn its relative importance as a source of replenishment. As conventional techniques would not give a quick and sure answer to this matter, resort was had to isotopic techniques to solve the problem. In the rivers 27 samples of surface water were taken and 28 samples of subterranean water in wells, which were analyzed by I.A.E.A. with headquarters in Vienna. Interpretation of the data indicated, without room for doubt, that infiltrated rainwater represents 67% of the replenishment in the neighborhood of the Rio Blanco, 85% in the area's center, and 100% in the zones distant from the Rio Blanco. (author)

Contribution of isotope techniques to evaluate water resources in the Peruvian Altiplano

International Nuclear Information System (INIS)

Araguas, L.; Arroyo, C.; Palza, G.; Rojas, R.; Romero, J.; Silar, J.

1999-01-01

Environmental isotopes H , 18 O, 13 C, 3 H, and 14 C were regularly measured in precipitation, surface, and ground water to investigate a series of problems linked with the management of water resources in the Peruvian Altiplano, a plateau located in Southern Peru

Various analytical techniques used for the measurement of isotopic purity of heavy water at Madras Atomic Power Station

International Nuclear Information System (INIS)

Satyanarayanan, V.; Umapathy, P.; Bhaskaran, R.; Nagarajan, J.; Pradeep, Jeena; Ayyar, S.R.

2008-01-01

The paper deals with the various techniques used for the measurement of isotopic purity of heavy water samples received from different sources viz. reactor systems, heavy water upgrading plant and fresh consignment from heavy water production plants. Heavy water is used in PHWRs as moderator and primary coolant. Isotopic Purity is an important parameter to be monitored/analysed regularly for both the systems. There is a minimum isotopic purity level to be maintained in the moderator system due to neutron economy/fuel burnup and in the case of coolant system the measurement is of paramount importance due to its safety considerations. The selection of the method of analysis depends on the isotopic range. The techniques used to measure the isotopic purity of heavy water are a) Infrared Spectrophotometry b) Refractometry c) Densitometry. Infrared spectrometer uses the property of molecular absorption of IR radiation by HOD species and the absorbance is the measure of isotopic purity. This technique is generally used for measuring high isotopic (80-99.98%) and low isotopic samples. Refractometer uses the property of refractive index of heavy water. The difference in refractive indices of light water and heavy water is 0.0048. A 1 % change in D 2 O concentration would thus equal to 0.000048 refractive index units. This method is used for determining the approximate isotopic value of a sample. Density meter uses the property of difference in densities of light and heavy water. The difference in density of 99.999% D 2 O and light water is 0.107540 which covers the whole range of interest. The experience gained with these techniques in the measurements of isotopic purity of various samples are presented in this paper. (author)

Advective isotope transport by mixing cell and particle tracking algorithms

International Nuclear Information System (INIS)

Tezcan, L.; Meric, T.

1999-01-01

The 'mixing cell' algorithm of the environmental isotope data evaluation is integrated with the three dimensional finite difference ground water flow model (MODFLOW) to simulate the advective isotope transport and the approach is compared with the 'particle tracking' algorithm of the MOC3D, that simulates three-dimensional solute transport with the method of characteristics technique

Neutron activation techniques in the detection and measurement of environmental pollutants

International Nuclear Information System (INIS)

Spyrou, N.M.; Maheswaran, P.; Nagy, K.; Oezek, F.

1976-01-01

The Medical and Environmental Group at the University of Surrey has been involved for several years in the development and application of nuclear activation techniques to biomedical and environmental problems. One such project has been a study of air pollution in the city of Guildford, which requires a routine but quick analytical process for the detection of trace elements in the atmosphere in order to handle data with limited resources and manpower. The proposed method comprises cyclic irradiation and counting, followed by further counting on a low-energy photon detector and a Ge(Li) detector. The scheme concentrates on the measurement of short-lived isotopes. In order to test its efficacy it is compared with conventional activation experiments for irradiation times of 1 min, 10 min and 60 min; various types of filter papers and membranes, used for collection of the samples, are analysed under these conditions. The paper illustrates this comparison by analysis of NBS Standard Reference Material 1571 (Orchard Leaves) on Whatman grade 1 filter paper. The analysis of a typical Guildford sample is also shown. The technique enhances the detection of 38 Clsup(m)(0.74 s), 207 Pbsup(m)(0.8 s), 20 F(11.56 s), 77 Sesup(m)(17.5 s) and 110 Ag(24.4 s). (author)

Application of environmental isotopes to characterize landfill gases and leachate

International Nuclear Information System (INIS)

Liu, C.L.; Hackley, K.C.; Baker, J.

1992-01-01

Environmental isotopes have been used to help characterize landfill gases and leachate for the purpose of identifying leachate and/or gas contamination in surrounding monitoring wells. Carbon isotopes (C-13/C-12 and C-14), hydrogen isotopes (H-3 and H-2/H-1) and oxygen isotopes (O-18/O-16) were used to characterize methane, carbon dioxide and leachate produced from two municipal landfills in northeastern Illinois. The isotopic results from the landfill-derived gases and leachate are compared to isotopic compositions of groundwater and gases from nearby monitoring wells. C-14 activity of landfill CH 4 is high compared to CH 4 normally found in subsurface sediments. For this study C-14 activities of the landfill methane range from 129--140 PMC. The C-14 of the dissolved inorganic carbon (DIC) of the leachate samples also have relatively high activities, ranging from 126--141 PMC. The δC-13 and δD values for CH 4 from the landfills fall within a range of values representative of microbial methane produced by acetate-fermentation. The δC-13 of the CO 2 and the DIC are very positive, ranging from 8--14 per-thousand for CO 2 and 13--22 per-thousand for DIC. The δO-18 values of the leachates are similar to current meteoric water values, however, two of the leachate samples are significantly enriched in deuterium by approximately 65 per-thousand. Tritium values of the leachate water are generally higher than expected. For one landfill the tritium activity ranges from 227--338 TU, for the second landfill the tritium activity is approximately 1,300 TU. Compared to tritium levels in normal groundwater, these higher tritium values in the leachates indicate that this isotope has the potential to be an effective tracer for detecting leachate migration

Chemical and environmental isotope study of the basaltic aquifer systems of Yarmouk Basin (Syria)

International Nuclear Information System (INIS)

Kattan, Z.

1994-08-01

The water in the fissured basalt aquifer system, the Upper Jurassic aquifer of the Yarmouk Basin and the atmospheric precipitation have been investigated using chemical and environmental isotope techniques. The groundwaters flowing through the different aquifers are differentiated by their chemical ratios and their isotopic compositions. The evolution of chemical facies of groundwater from the recharge area towards the basin outlet is characterized by increasing of sodium and magnesium contents as a result of silicate leaching. The stable isotope compositions of precipitation and mountainous spring waters match the Mediterranean Meteoric Water Line, while the groundwaters from the central zone and from the major springs of the Yarmouk Basin are mixtures of freshwater, which is isotopically depleted and salty groundwater of Laja plateau area. The interpretations of tritium and radiocarbon ( 14 C) data indicate that the recharge zones of the groundwater in the Yarmouk Basin occur on the high-land of more than 1000 m of altitude. The residence time of the mountainous springs is short (of about 40 years or less). However, water ages corrected by Vogel's concept and Gonfiantini's Model show, in general, a range from 1000 to 11000 years for the central zone groundwater. The groundwater moves from the Mt. Hermon and Mt. Arab towards the central zone and from the north-east (i.e. the Laja plateau) towards south-west (i.e. the major springs). The radiometric flow velocities range from 20 to 60 m/year within the central zone, while the flow velocities from both sides of Mt. Hermon and Mt. Arab are lower (1-7 m/year). (author). 43 refs., 37 figs., 6 tabs

Stable isotope composition of environmental water and food products as a tracer of origin

International Nuclear Information System (INIS)

Wierzchnicki, R.; Owczarczyk, A.; Soltyk, W.

2004-01-01

The paper is the review of Institute of Nuclear Chemistry and Technology (INCT) activity in application of stable isotope ratios (especially D/H and 18 O/ 16 O) for environmental studies and food origin control. INCT has at disposal since 1998, a high class instrument - Isotope Ratio Mass Spectrometer, Delta Plus, Finnigan MAT, Germany - suitable to perform such measurements. (author)

Determination of uranium isotopes in environmental samples by anion exchange in sulfuric and hydrochloric acid media

International Nuclear Information System (INIS)

Popov, L.

2016-01-01

Method for determination of uranium isotopes in various environmental samples is presented. The major advantages of the method are the low cost of the analysis, high radiochemical yields and good decontamination factors from the matrix elements, natural and man-made radionuclides. The separation and purification of uranium is attained by adsorption with strong base anion exchange resin in sulfuric and hydrochloric acid media. Uranium is electrodeposited on a stainless steel disk and measured by alpha spectrometry. The analytical method has been applied for the determination of concentrations of uranium isotopes in mineral, spring and tap waters from Bulgaria. The analytical quality was checked by analyzing reference materials. - Highlights: • The method allows cost-effective determination of U isotopes. • High amounts of environmental samples can be analyzed. • High chemical yields, energy resolution and decontamination factors were achieved. • Uranium isotope concentrations in mineral waters from Bulgaria are presented.

Stable isotopes of transition and post-transition metals as tracers in environmental studies

Science.gov (United States)

Bullen, Tomas D.; Baskaran, Mark

2011-01-01

The transition and post-transition metals, which include the elements in Groups 3–12 of the Periodic Table, have a broad range of geological and biological roles as well as industrial applications and thus are widespread in the environment. Interdisciplinary research over the past decade has resulted in a broad understanding of the isotope systematics of this important group of elements and revealed largely unexpected variability in isotope composition for natural materials. Significant kinetic and equilibrium isotope fractionation has been observed for redox sensitive metals such as iron, chromium, copper, molybdenum and mercury, and for metals that are not redox sensitive in nature such as cadmium and zinc. In the environmental sciences, the isotopes are increasingly being used to understand important issues such as tracing of metal contaminant sources and fates, unraveling metal redox cycles, deciphering metal nutrient pathways and cycles, and developing isotope biosignatures that can indicate the role of biological activity in ancient and modern planetary systems.

Environmental controls on stable isotopes of precipitation in Lanzhou, China: An enhanced network at city scale.

Science.gov (United States)

Chen, Fenli; Zhang, Mingjun; Wang, Shengjie; Qiu, Xue; Du, Mingxia

2017-12-31

Stable hydrogen and oxygen isotopes in precipitation are very sensitive to environmental changes, and can record evolution of water cycle. The Lanzhou city in northwestern China is jointly influenced by the monsoon and westerlies, which is considered as a vital platform to investigate the moisture regime for this region. Since 2011, an observation network of stable isotopes in precipitation was established across the city, and four stations were included in the network. In 2013, six more sampling stations were added, and the enhanced network might provide more meaningful information on spatial incoherence and synoptic process. This study focused on the variations of stable isotopes (δ 18 O and δD) in precipitation and the environmental controls based on the 1432 samples in this enhanced network from April 2011 to October 2014. The results showed that the precipitation isotopes had great spatial diversity, and the neighboring stations may present large difference in δD and δ 18 O. Based on the observation at ten sampling sites, an isoscape in precipitation was calculated, and the method is useful to produce isoscape for small domains. The temperature effect and amount effect was reconsidered based on the dataset. Taking meteorological parameters (temperature, precipitation amount, relative humidity, water vapor pressure and dew point temperature) as variables in a multi-linear regression, the result of coefficients for these meteorological parameters were calculated. Some cases were also involved in this study, and the isotopic characteristics during one event or continuous days were used to understand the environmental controls on precipitation isotopes. Copyright © 2017 Elsevier B.V. All rights reserved.

Exposure calculations for the FRG isotopic heat source project environmental assessment

International Nuclear Information System (INIS)

Metcalf, I.L.

1997-01-01

The report documents the maximum exposure for transfer of the Federal Republic of Germany (FRG) Isotopic Heat Sources from the 324 Building and placed in interim storage at the Central Waste Complex (CWC). These results are to be reported in the Environmental Assessment DOE-EA- 1 21 1

Radioisotopes and stable isotopes and their applications in earth sciences, safety-in-mines, and environmental protection. 1

International Nuclear Information System (INIS)

1981-01-01

The state of the art and objectives of isotope research in earth sciences, safety-in-mines, and environmental protection is reported. Volume 1 contains papers dedicated to origin and distribution of natural radioisotopes and stable isotopes

Environmental testing techniques for electronics and materials

CERN Document Server

Dummer, Geoffrey W A; Fry, D W; Higinbotham, W

2013-01-01

Environmental Testing Techniques for Electronics and Materials reviews environmental testing techniques for evaluating the performance of electronic equipment, components, and materials. Environmental test planning, test methods, and instrumentation are described, along with the general environmental conditions under which equipment must operate. This book is comprised of 15 chapters and begins by explaining why environmental testing is necessary and describing the environment in which electronics must operate. The next chapter considers how an environmental test plan is designed; the methods

Iodine isotopes species fingerprinting environmental conditions in surface water along the northeastern Atlantic Ocean

DEFF Research Database (Denmark)

He, Peng; Hou, Xiaolin; Aldahan, Ala

2013-01-01

Concentrations and species of iodine isotopes (127I and 129I) provide vital information about iodine geochemistry, environmental conditions and water masses exchange in oceans. Despite extensive investigations of anthropogenic 129I in the Arctic Ocean and the Nordic Seas, concentrations of the is...... 129I in ocean environments and impact on climate at the ocean boundary layer.......Concentrations and species of iodine isotopes (127I and 129I) provide vital information about iodine geochemistry, environmental conditions and water masses exchange in oceans. Despite extensive investigations of anthropogenic 129I in the Arctic Ocean and the Nordic Seas, concentrations...... of the isotope in the Atlantic Ocean are, however, still unknown. We here present first data on 129I and 127I, and their species (iodide and iodate) in surface water transect along the northeastern Atlantic between 30° and 50°N. The results show iodate as the predominant species in the analyzed marine waters...

Development of techniques for furthering the use of isotope radiography

International Nuclear Information System (INIS)

Wamorkar, R.R.; Singh, G.; Kalurkar, A.R.; Jagasia, N.S.; Malhotra, H.K.

1977-01-01

Isotope radiography techniques in the non-conventional applications such as : (a) hot radiography - a method for examination of radioactive materials, and (b) thin section radiography for inspection of biological specimen and non-metallic specimen are described. Also, a process used for the reproduction of gamma-graphs of welds and castings has been discussed in detail. (author)

Environmental isotopic study of the Korama aquifers, south of Zinder (Niger)

International Nuclear Information System (INIS)

Zakara, Z.; Karbo, A.; Aranyossy, J.F.

1993-01-01

A first environmental isotope study has been carried out on the ''Korama'' aquifers located in the southern part of the city of Zinder (Niger). Preliminary interpretation confirms that most of the aquifers are presently recharged by direct infiltration of rainwater. Structural fractures seem to play an important role in the water circulation allowing vertical drainage of oldest water coming from deeper aquifers and facilitating the recharge by surface water in the prheatic zone. It does not appear any difference between the so-called ''superficial Korama'' and the ''Deep Korama'' aquifers on the basis of the isotopic compositions. (author). 11 refs, 7 figs, 2 tabs

The use of isotopic correlation technique for determination of sup(241)Am and sup(243)Am concentration in nuclear irradiated fuels

International Nuclear Information System (INIS)

Souza Sarkis, J.E. de.

1990-01-01

In the last years the isotopic correlation technique is emerging as a powerful tool for the determination of concentration and isotopic composition of heavy nuclides in the nuclear fuel cycle. Accordingly, this technique has gained significant importance for the safeguard of the nuclear materials as well as for the accounting and build up of actinides elements in the irradiated nuclear fuels. In this work 42 isotopic correlations between the nuclides sup(241)Am and sup(243)Am and post irradiation isotopic data of 7 samples from fuel element BE-124 and 1 sample from fuel element BE-120 from the Obrigheim pressurized water nuclear power reactor, Federal Republic of Germany, were proposed. These isotopic correlations allowed to estimate the isotopic concentrations of sup(241)Am and sup(243)Am with an average deviation, relative to the experimental data obtained from isotopic dilution mass spectrometry technique, of 10%. These results are more precise than those found using the computer code ORIGEN 2 demonstrating the great potential of this technique for the determination of isotopic concentration and build up of those nuclides in irradiated nuclear fuels. The analytical and other experimental aspects of the post irradiation isotopic analysis of nuclear fuels are also discussed. (author)

Isotope techniques in the study of the hydrology of fractured and fissured rocks

International Nuclear Information System (INIS)

1989-01-01

It is generally agreed that the hydrology of fractured rocks refers to the occurrence and movement of groundwater in rocks whose porosity is due to cracks, fissures and fractures in compact rocks. Until recently, crystalline rocks were considered to be impervious (the role of karst reservoirs for groundwater storage is already known). Thus, although fractured rocks cover approximately one-third of the Earth's surface, knowledge of groundwater flow dynamics still needs to be substantively improved. The Proceedings include the papers presented at the Advisory Group Meeting on the Application of Isotope Techniques in the Study of the Hydrology of Fractured and Fissured Rocks, which took place in Vienna from 17 to 21 November 1986. The meeting was attended by 21 scientists from 10 Member States. The Group agreed that the following topics should be given the highest priority: (1) Protection of groundwater resources should be incorporated into all future activities. This implies that recharge areas have to be delineated, not only using nuclear techniques but also other hydrogeological and geochemical methods. Research efforts in this direction should be intensified. (2) The Group was aware that new isotope techniques are being developed in hydrogeology and agreed that their application in fractured and fissured rocks showed promise. It was therefore suggested that information on new isotopes such as 36 Cl and 129 I should be gathered, either in the form of the various techniques currently being used by different laboratories or through the various activities that are being undertaken. Ways of co-ordinating the work being done and exchanging information at the international level should be encouraged. The Proceedings should be of interest to scientists responsible for the evaluation of water resources in crystalline rocks. It is hoped that hydrologists and hydrogeologists working in such terrains who are not familiar with the use of isotope techniques will find ideas and

Isotope and chemical techniques in assessing groundwater contamination from Metro Manila landfill

International Nuclear Information System (INIS)

Castaneda, Soledad S.; Almoneda, Rosalina V.; Ascano, Luz; Del Castillo, Lorena A.; Fernandez, Lourdes G.; Sucgang, Raymond J.; Iblan, Cynthia L.; Baui, Daniel G.

2007-01-01

The first objective of the investigations is establishing benchmark isotopic characteristics of water sources and baseline concentrations of main environmental parameters related to contamination from the landfill. Water samples were collected from the production wells and surface water in the municipalities in proximity of the landfill, in Rodriguez and in San Mateo. Stable isotope characterization of the deep groundwater and rivers shows isotopic values clustering along the LMWL with ae 18 O ranging from -7.5 promille to -6.5 promille and ae 2 H ranging from - 53.59 promille to -42.91. The shallow groundwater are more isotopically enriched trending towards the evaporation line, with mean ae 18 O and aeD values of -6.46 promille and -44.14 promille, respectively. The mean isotopic signatures of surface water, with mean ae 18 O of -7.19 promille and deep groundwater, with mean ae 18 O of -6.67 promille, in Rodriguez are significantly distinct. San Mateo groundwater appear to be more isotopically enriched, indicating recharge different from that of Rodriguez groundwater. Leachate from the landfill exhibits a distinct isotopic composition from the freshwaters, with ae 18 O and aeD values of -5.58 promille and -31.66 promille. The significant differences in the isotopic signatures of the different water sources in the study area would facilitate detection of contamination from leachate run-off to the surface water, and eventually, to the groundwater. Trace metals in the water samples collected, generally, were below the regulatory limits for drinking water and surface water. Results of elemental determination in the sediment samples obtained from rivers showed that aside from the major crustal elements, Zn, Cu, and Ni were also present in significant amount. (author)

Isotope hydrology in Latin America

Energy Technology Data Exchange (ETDEWEB)

Payne, B R [International Atomic Energy Agency, Division of Research and Laboratories, Isotope Hydrology Section, Vienna (Austria)

1972-07-01

A wide variety of problems in hydrology have proved susceptible to the use of nuclear techniques. Conclusions may be drawn from the relative abundances of certain 'environmental isotopes', such as heavy stable isotopes of hydrogen and oxygen in water molecules, tritium, carbon-14 and silicon-32, in atmospheric, surface or ground water; origin and rate of flow, for example, may be deduced. Artificial radioisotopes may be used similarly as a logical extension to well-known tracer techniques using dyes and salts. Inherent in the use of such radiotracers are the advantages of very high detection sensitivity (and thus very low required concentrations and the elimination of density effects), and a choice of a variety of nuclides alien to the geohydrological system (and hence unique identification and low background). (author)

Determination of total uranium by mass spectrometry utilizing the isotopic dilution technique

International Nuclear Information System (INIS)

Cretella, R.F.; Noutary, C.J.; Servant, R.E.

1981-01-01

The isotopic dilution associated to mass spectrometry is a high-sensitivity technique that allows to work with microquantities of the sample, making it possible to analize the content in highly radioactive solutions with excellent accuracy and minimum risk. The proposed technique is described and its results are discussed through the analysis of: 1) A synthetic sample that simulates dissolved spent fuel elements; 2) Uranium dioxide of nuclear purity and 3) Uranium concentrate. 233 U(ORNL) was employed as a tracer and a Nuclide 12-90-SU mass spectrometer of simple magnetic focus as measurement instrument. The accuracy reached in the analyses is better than 0.5% with a reliability of 95%. The analysis of the errors shows that their main contributing source are the errors in the measurement of the isotopic ratios. (M.E.L.) [es

Interpretation of environmental isotopic groundwater data. Arid and semi-arid zones

International Nuclear Information System (INIS)

Geyh, M.A.

1980-01-01

Various hydrodynamic aspects are discussed in order to show their implication for the hydrogeological interpretation of environmental isotope and hydrochemical groundwater data. Special attention is drawn to radiocarbon and tritium studies carried out in arid and semi-arid zones. An exponential model has been utilized to determine the mean residence time of the long-term water from springs in karst and crystalline regions. Hydrogeological parameters such as the porosity can be checked by this result. In addition, the exponential model offers the possibility of determining the initial 14 C content of spring water, which is sensitively dependent on the soil of the recharge area. A base-flow model has been introduced to interpret the 14 C and 3 H data of groundwater samples from older karst regions. Differences between pumped and drawn samples exist with respect to the groundwater budget. Owing to pumping, the old base flow is accelerated and becomes enriched in pumped groundwater in comparison to the short-term water. Radiocarbon ages of groundwater in alluvium may be dubious because of isotope exchange with the CO 2 in the root zone along the river bank. Under confined conditions 14 C groundwater ages are diminished if the hydraulic head of the confined aquifer is lower than that of the shallow one. This is due to the radiocarbon downwards transport by convection of shallow groundwater. The same effect occurs, though much faster, if the groundwater table is depleted by groundwater withdrawal. The decrease of the radiocarbon groundwater ages in time can be used to determine the hydraulic transmissibility coefficient of the aquitarde. According to the practical and theoretic results obtained the hydrodynamic aspects require at least the same attention for the interpretation of environmental isotope and hydrochemical data of groundwater as do hydrochemical and isotope fractionation processes. (author)

Use of Isotopic Techniques for the Assessment of Hydrological Interaction Surface Water and Groundwater. Rio Man - Cienaga Colombia

International Nuclear Information System (INIS)

Palacio B, P.; Betancur V, T.; Dapena, C.

2011-01-01

This job integrates the first results from the studies ''Conceptual Hydrological Model for the middle and lower parts of the Man River basin using hydrological, hydrochemical and isotopic techniques'' (Palacio, 2011) and ''Hydrochemical and Isotopic techniques for the assessment of hydrological processes in the the wetlands of Bajo Cauca Antioquia'' (University of Antioquia and International Atomic Energy Agency (IAEA). The Man river basin covers an area of 688 km 2 ; with temperatures ranging from 25 to 30 o C; The average annual rainfall is 2.800 mm. The geology of the area is composed mainly of clastic sedimentary rocks of continental origin. A hydrological model of interaction between surface water and groundwater for the lower middle of the Man River basin was obtained by the use of hydrological analysis techniques. This model was refined, adjusted and validated using isotope techniques based mainly on the analysis of spatial and temporal variance of stable isotopes found in rain water, surface bodies of water such as streams and wetlands, and in an unconfined aquifer.

Isotopes and radiations in agriculture and environment research

International Nuclear Information System (INIS)

Sachdev, M.S.; Sachdev, P.; Deb, D.L.

1996-10-01

The use of isotope and radiation techniques in agriculture and environmental research has considerably helped in meeting the challenges of increasing crop and animal production. The present compilation presents the state of the art on the use of these techniques particularly in the context of current research and development programmes in this field. Papers relevant to INIS are indexed separately

Storm runoff analysis using environmental isotopes and major ions

International Nuclear Information System (INIS)

Fritz, P.; Cherry, J.A.; Sklash, M.; Weyer, K.U.

1976-01-01

At a given locality the oxygen-18 content of rainwater varies from storm to storm but within broad seasonal trends. Very frequently, especially during heavy summer storms, the stable isotope composition of rainwater differs from that of the groundwater in the area. This isotopic difference can be used to differentiate between 'prestorm' and 'rain' components in storm runoff. This approach to the use of natural 18 O was applied in four hydrogeologically very different basins in Canada. Their surface areas range from less than 2km 2 to more than 700km 2 . Before, during and after the storm events samples of stream water, groundwater and rain were analysed for 18 O and in some cases for deuterium, major ions and electrical conductance. The 18 O hydrograph separations show that groundwater was a major component of the runoff in each of the basins, and usually exceeded 50% of the total water discharged. Even at peak stream flow most of discharge was subsurface water. The identification of geographic sources rather than time sources appears possible if isotope techniques are used in conjunction with chemical analyses, hydrological data - such as flow measurements - and visual observations. (author)

Hydrogeological investigations in the Harwell region: the use of environmental isotopes, inert gas contents, and the uranium decay series

International Nuclear Information System (INIS)

Alexander, J.; Andrews, J.N.

1984-12-01

A comprehensive range of environmental isotopes, radioelement and dissolved gas contents have been measured in groundwaters from the high permeability formations of the Harwell area. These analyses were undertaken as part of a hydrochemical validation of groundwater circulation patterns derived from potentiometric data. These investigations have focused upon the Corallian and Great Oolite formations since these sandwich the Oxford Clay. Geochemical, isotopic, radioelement and inert gas studies have demonstrated consistent trends which substantiate fluid migration patterns derived from hydraulic considerations. Groundwaters at downdip localities in both the Corallian and Great Oolite formations are the oldest waters sampled from the region. Variations in trends in parameters can be attributed to cross-formational flow and subsequent mixing of groundwaters. Individually these techniques can only provide limited information, but the combination of methods used have provided corroborative evidence concerning the direction of fluid circulation in the Harwell region. (author)

Harmonization of health related environmental measurements using nuclear and isotopic techniques. Proceedings of an international symposium

International Nuclear Information System (INIS)

1997-01-01

One of the particular strengths of nuclear methods is in analytical quality assurance, including the validation of analytical methods and the development of new analytical reference materials. These methodologies are therefore helping to harmonize the data produced not only by nuclear techniques themselves, but also by other non-nuclear methods of analysis. The aim of this symposium was to provide an international forum for discussion of these topics. Its programme covered a wide variety of applications of nuclear (and related) analytical techniques (mainly neutron activation analysis, energy dispersive X ray fluorescence, particle induced X ray emission and inductively coupled plasma-mass spectrometry) as used in the study of air particulates, solid waste products, sediments, food, water, human tissues, biomonitors and other kinds of environmental samples

The essential role of isotopes in studies of water resources

International Nuclear Information System (INIS)

1977-01-01

In studies of surface water, isotope techniques are used to measure water runoff from rain and snow, flow rates of streams and rivers, leakage from lakes, reservoirs and canals and the dynamics of various bodies of water. Studies of groundwater resources (springs, wells) today are virtually unthinkable without isotope techniques. Basically, these techniques are simple and relatively quick. Among the many questions which may be asked of hydrologists about a given groundwater supply, often the most critical one concerns the safe yield so that the source will not run dry, or for a source to be 'mined', the total yield. Isotope techniques can be used to solve such problems as: identification of the origin of groundwater, determination of its age, flow velocity and direction, interrelations between surface waters and ground waters, possible connections between different aquifers, local porosity, transmissivity and dispersivity of an aquifer. The cost of such investigations is often small in comparison to the cost of classical hydrological techniques, and in addition they are able to provide information which sometimes cannot be obtained by other techniques. The IAEA provides assistance to countries in the application of isotope techniques in water resources studies and other hydrology field projects. The examples given of field studies are intended to give some idea of how these techniques are being applied to specific problems in various regions of the world. Most are discussed briefly, but in some cases a more detailed description has been given in order to demonstrate the application of environmental isotope techniques

A solvent extraction technique for the isotopic measurement of dissolved copper in seawater

Energy Technology Data Exchange (ETDEWEB)

Thompson, Claire M., E-mail: claire.thompson@anu.edu.au; Ellwood, Michael J., E-mail: michael.ellwood@anu.edu.au; Wille, Martin, E-mail: martin.wille@uni-tuebingen.de

2013-05-02

Graphical abstract: -- Highlights: •A new sample preparation method for seawater copper isotopic analysis (δ{sup 65}Cu). •Solvent-extraction was used to pre-concentrate metals from seawater samples. •Anion-exchange was used to purify copper from the metal-rich extract. •δ{sup 65}Cu was measured in the north Tasman Sea. •Seawater δ{sup 65}Cu may be linked to marine biological activity. -- Abstract: Stable copper (Cu) isotope geochemistry provides a new perspective for investigating and understanding Cu speciation and biogeochemical Cu cycling in seawater. In this work, sample preparation for isotopic analysis employed solvent-extraction with amino pyrollidine dithiocarbamate/diethyl dithiocarbamate (APDC/DDC), coupled with a nitric acid back-extraction, to concentrate Cu from seawater. This was followed by Cu-purification using anion-exchange. This straightforward technique is high yielding and fractionation free for Cu and allows precise measurement of the seawater Cu isotopic composition using multi-collector inductively coupled plasma mass-spectrometry. A deep-sea profile measured in the oligotrophic north Tasman Sea shows fractionation in the Cu isotopic signature in the photic zone but is relatively homogenised at depth. A minima in the Cu isotopic profile correlates with the chlorophyll a maximum at the site. These results indicate that a range of processes are likely to fractionate stable Cu isotopes in seawater.

Hydrodynamic influence on reservoir sustainability in semi-arid climate: A physicochemical and environmental isotopic study.

Science.gov (United States)

Ammar, Rawaa; Kazpard, Véronique; El Samrani, Antoine G; Amacha, Nabil; Saad, Zeinab; Chou, Lei

2017-07-15

Water scarcity and increasing water demand require the development of water management plans such as establishing artificial lakes and dams. Plans to meet water needs are faced by uprising challenges to improve water quality and to ensure the sustainability of hydro-projects. Environmental isotopes coupled to water physicochemical characteristics were investigated over a biennial cycle to assess both geomorphological and environmental impacts on the water quality of a reservoir situated in an intensively used agricultural watershed under a Mediterranean semi-arid climate. The particularity of the semi-arid climate and the diverse topography generate a continental and orographic rain effect on the isotopic composition of precipitation and the water recharged sources. The studied reservoir responds quickly to land-use activities and climatic changes as reflected by temporal and spatial variations of water chemistry and isotopic composition. Increasing changes in precipitation rate and dry periods significantly modified the water isotopic composition in the reservoir. During the first year, hydrogen (δD) and oxygen (δ 18 O) isotopes are depleted by 6 and 2‰ between dry and wet season, respectively. While a shift of -2‰ for δD and -1‰ for δ 18 O was detected during the second annual cycle. Environmental isotopic compositions demonstrate for the first time the occurrence of groundwater inflow to the central (Cz) and dam (Dz) zones of the Qaraaoun reservoir. The Cz and Dz can be considered as open water bodies subjected to dilution by groundwater inflow, which induces vertical mixing and reverse isotopic stratification of the water column. In the contrary, the river mouth zone acts as a closed system without groundwater intrusion, where heavy water accumulates and may act as a sink for contaminants during dry season. Groundwater influx acts as a dilution factor that renews the hypolimnion, and minimizes the perturbations induced by both internal

Can groundwater sampling techniques used in monitoring wells influence methane concentrations and isotopes?

Science.gov (United States)

Rivard, Christine; Bordeleau, Geneviève; Lavoie, Denis; Lefebvre, René; Malet, Xavier

2018-03-06

Methane concentrations and isotopic composition in groundwater are the focus of a growing number of studies. However, concerns are often expressed regarding the integrity of samples, as methane is very volatile and may partially exsolve during sample lifting in the well and transfer to sampling containers. While issues concerning bottle-filling techniques have already been documented, this paper documents a comparison of methane concentration and isotopic composition obtained with three devices commonly used to retrieve water samples from dedicated observation wells. This work lies within the framework of a larger project carried out in the Saint-Édouard area (southern Québec, Canada), whose objective was to assess the risk to shallow groundwater quality related to potential shale gas exploitation. The selected sampling devices, which were tested on ten wells during three sampling campaigns, consist of an impeller pump, a bladder pump, and disposable sampling bags (HydraSleeve). The sampling bags were used both before and after pumping, to verify the appropriateness of a no-purge approach, compared to the low-flow approach involving pumping until stabilization of field physicochemical parameters. Results show that methane concentrations obtained with the selected sampling techniques are usually similar and that there is no systematic bias related to a specific technique. Nonetheless, concentrations can sometimes vary quite significantly (up to 3.5 times) for a given well and sampling event. Methane isotopic composition obtained with all sampling techniques is very similar, except in some cases where sampling bags were used before pumping (no-purge approach), in wells where multiple groundwater sources enter the borehole.

Reassessment of the NH4 NO3 thermal decomposition technique for calibration of the N2 O isotopic composition.

Science.gov (United States)

Mohn, Joachim; Gutjahr, Wilhelm; Toyoda, Sakae; Harris, Eliza; Ibraim, Erkan; Geilmann, Heike; Schleppi, Patrick; Kuhn, Thomas; Lehmann, Moritz F; Decock, Charlotte; Werner, Roland A; Yoshida, Naohiro; Brand, Willi A

2016-09-08

In the last few years, the study of N 2 O site-specific nitrogen isotope composition has been established as a powerful technique to disentangle N 2 O emission pathways. This trend has been accelerated by significant analytical progress in the field of isotope-ratio mass-spectrometry (IRMS) and more recently quantum cascade laser absorption spectroscopy (QCLAS). Methods The ammonium nitrate (NH 4 NO 3 ) decomposition technique provides a strategy to scale the 15 N site-specific (SP ≡ δ 15 N α - δ 15 N β ) and bulk (δ 15 N bulk  = (δ 15 N α  + δ 15 N β )/2) isotopic composition of N 2 O against the international standard for the 15 N/ 14 N isotope ratio (AIR-N 2 ). Within the current project 15 N fractionation effects during thermal decomposition of NH 4 NO 3 on the N 2 O site preference were studied using static and dynamic decomposition techniques. The validity of the NH 4 NO 3 decomposition technique to link NH 4 + and NO 3 - moiety-specific δ 15 N analysis by IRMS to the site-specific nitrogen isotopic composition of N 2 O was confirmed. However, the accuracy of this approach for the calibration of δ 15 N α and δ 15 N β values was found to be limited by non-quantitative NH 4 NO 3 decomposition in combination with substantially different isotope enrichment factors for the conversion of the NO 3 - or NH 4 + nitrogen atom into the α or β position of the N 2 O molecule. The study reveals that the completeness and reproducibility of the NH 4 NO 3 decomposition reaction currently confine the anchoring of N 2 O site-specific isotopic composition to the international isotope ratio scale AIR-N 2 . The authors suggest establishing a set of N 2 O isotope reference materials with appropriate site-specific isotopic composition, as community standards, to improve inter-laboratory compatibility. This article is protected by copyright. All rights reserved.

Analysis and application of heavy isotopes in the environment

Science.gov (United States)

Steier, Peter; Dellinger, Franz; Forstner, Oliver; Golser, Robin; Knie, Klaus; Kutschera, Walter; Priller, Alfred; Quinto, Francesca; Srncik, Michaela; Terrasi, Filippo; Vockenhuber, Christof; Wallner, Anton; Wallner, Gabriele; Wild, Eva Maria

2010-04-01

A growing number of AMS laboratories are pursuing applications of actinides. We discuss the basic requirements of the AMS technique of heavy (i.e., above ˜150 amu) isotopes, present the setup at the Vienna Environmental Research Accelerator (VERA) which is especially well suited for the isotope 236U, and give a comparison with other AMS facilities. Special emphasis will be put on elaborating the effective detection limits for environmental samples with respect to other mass spectrometric methods. At VERA, we have carried out measurements for radiation protection and environmental monitoring ( 236U, 239,240,241,242,244Pu), astrophysics ( 182Hf, 236U, 244Pu, 247Cm), nuclear physics, and a search for long-lived super-heavy elements ( Z > 100). We are pursuing the environmental distribution of 236U, as a basis for geological applications of natural 236U.

Analysis and application of heavy isotopes in the environment

International Nuclear Information System (INIS)

Steier, Peter; Dellinger, Franz; Forstner, Oliver; Golser, Robin; Knie, Klaus; Kutschera, Walter; Priller, Alfred; Quinto, Francesca; Srncik, Michaela; Terrasi, Filippo; Vockenhuber, Christof; Wallner, Anton; Wallner, Gabriele; Wild, Eva Maria

2010-01-01

A growing number of AMS laboratories are pursuing applications of actinides. We discuss the basic requirements of the AMS technique of heavy (i.e., above ∼150 amu) isotopes, present the setup at the Vienna Environmental Research Accelerator (VERA) which is especially well suited for the isotope 236 U, and give a comparison with other AMS facilities. Special emphasis will be put on elaborating the effective detection limits for environmental samples with respect to other mass spectrometric methods. At VERA, we have carried out measurements for radiation protection and environmental monitoring ( 236 U, 239,240,241,242,244 Pu), astrophysics ( 182 Hf, 236 U, 244 Pu, 247 Cm), nuclear physics, and a search for long-lived super-heavy elements (Z > 100). We are pursuing the environmental distribution of 236 U, as a basis for geological applications of natural 236 U.

Radiation and isotopic techniques in the study and control of piroplasms of cattle: a review

International Nuclear Information System (INIS)

Irvin, A.D.; Brocklesby, D.W.; Purnell, R.E.

1979-01-01

Radiation and isotopic techniques have been used in a number of ways to study Babesia and Theileria parasites (piroplasms), and in attempts to vaccinate animals against diseases induced by these agents. Work involving the piroplasm infections of cattle is reviewed in this paper. Some success has been achieved by using radiation to modify tick or bovine stages of parasites, for use as potential vaccines. Radiation has also been used to induce immuno-suppression in laboratory animals, in an effort to render them susceptible to bovine piroplasms, particularly Theileria. Isotope tracer techniques have been used for labelling parasites, and for studying metabolic pathways. Encouraging results, particularly with regard to vaccine development, indicate the importance of radiation techniques in the study and control of piroplasms of cattle. (Auth.)

A Practical Cryogen-Free CO2 Purification and Freezing Technique for Stable Isotope Analysis.

Science.gov (United States)

Sakai, Saburo; Matsuda, Shinichi

2017-04-18

Since isotopic analysis by mass spectrometry began in the early 1900s, sample gas for light-element isotopic measurements has been purified by the use of cryogens and vacuum-line systems. However, this conventional purification technique can achieve only certain temperatures that depend on the cryogens and can be sustained only as long as there is a continuous cryogen supply. Here, we demonstrate a practical cryogen-free CO 2 purification technique using an electrical operated cryocooler for stable isotope analysis. This approach is based on portable free-piston Stirling cooling technology and controls the temperature to an accuracy of 0.1 °C in a range from room temperature to -196 °C (liquid-nitrogen temperature). The lowest temperature can be achieved in as little as 10 min. We successfully purified CO 2 gas generated by carbonates and phosphoric acid reaction and found its sublimation point to be -155.6 °C at 0.1 Torr in the vacuum line. This means that the temperature required for CO 2 trapping is much higher than the liquid-nitrogen temperature. Our portable cooling system offers the ability to be free from the inconvenience of cryogen use for stable isotope analysis. It also offers a new cooling method applicable to a number of fields that use gas measurements.

Geohydrological and environmental isotope observation of Sishen ground waters

International Nuclear Information System (INIS)

Verhagen, B.Th.; Dziembowski, Z.M.

1985-01-01

The dewatering of Sishen Mine in the northern Cape Province supplies good quality water for the mine and surrounding areas. Using various approaches, attempts are made to quantify the remaining storage of ground water. Geohydrological observations provide an estimate based on extrapolating the thickness of dewatered rock. Environmental isotope observations on various borehole outputs show contrasts between different ground-water bodies and their mixtures and allows for some extrapolations of observed trends. Indications are that previous estimates of storage, based on ground-water level changes, are conservative

Nuclear material safeguards surveillance and accountancy by isotope correlation techniques

International Nuclear Information System (INIS)

Persiani, P.J.; Goleb, J.A.; Kroc, T.K.

1981-11-01

The purpose of this study is to investigate the applicability of isotope correlation techniques (ICT) to the Light Water Reactor (LWR) and the Liquid Metal Fast Breeder Reactor (LMFBR) fuel cycles for nuclear material accountancy and safeguards surveillance. The isotopic measurement of the inventory input to the reprocessing phase of the fuel cycle is the primary direct determination that an anomaly may exist in the fuel management of nuclear material. The nuclear materials accountancy gap which exists between the fabrication plant output and the input to the reprocessing plant can be minimized by using ICT at the dissolver stage of the reprocessing plant. The ICT allows a level of verification of the fabricator's fuel content specifications, the irradiation history, the fuel and blanket assemblies management and scheduling within the reactor, and the subsequent spent fuel assembly flows to the reprocessing plant. The investigation indicates that there exist relationships between isotopic concentration which have predictable, functional behavior over a range of burnup. Several cross-correlations serve to establish the initial core assembly-averaged composition. The selection of the more effective functionals will depend not only on the level of reliability of ICT for verification, but also on the capability, accuracy and difficulty of developing measurement methods. The propagation of measurement errors on the correlation functions and respective sensitivities to isotopic compositional changes have been examined and found to be consistent with current measurement methods

New isotope technologies in environmental physics

International Nuclear Information System (INIS)

Povinec, P.; Betti, M.; Jull, A.J.T.; Vojtyla, P.

2008-01-01

As the levels of radionuclides observed at present in the environment are very low, high sensitive analytical systems are required for carrying out environmental investigations. We review recent progress which has been done in low-level counting techniques in both radiometric and mass spectrometry sectors, with emphasis on underground laboratories. Monte Carlo (GEANT) simulation of background of HPGe detectors operating in various configurations, secondary ionisation mass spectrometry, and accelerator mass spectrometry. Applications of radiometric and mass spectrometry techniques in radioecology and climate change studies are presented and discussed as well. The review should help readers in better orientation on recent developments in the field of low-level counting and spectrometry, and to advice on construction principles of underground laboratories, as well as on criteria how to choose low of high energy mass spectrometers for environmental investigation. (Authors)

Application of isotope techniques to investigate groundwater pollution in India

International Nuclear Information System (INIS)

Shivanna, K.; Navada, S.V.; Kulkarni, K.M.; Sinha, U.K.; Sharma, S.

1998-01-01

Environmental isotopes ( 2 H, 18 O, 34 S, 3 H, and 14 C) techniques have been used along with hydrogeology and hydrochemistry to investigate: (a). the source of salinity and origin of sulphate in groundwaters of coastal Orissa, Orissa State, India and (b) to study the source of salinity in deep saline groundwaters of charnockite terrain at Kokkilimedu, South of Chennai, India. In the first case, as a part of large drinking water supply project, thousands of hand pumps were installed from 1985. Many of them became quickly unacceptable for potable supply due to salinity, increased iron and sulphate contents of the groundwater. In this alluvial, multiaquifer system, fresh, brackish and saline groundwaters occur in a rather complicated fashion. The conditions change from phreatic to confined flowing type with increasing depth. The results of the isotope geochemical investigation indicate that the shallow groundwater (depth/<50m) is fresh and modern. Groundwater salinity in intermediate aquifer (50 - 100m) is due to the Flandrian transgression during Holocene period. Fresh and modern deep groundwater forms a well developed aquifer which receives recharge through weathered basement rock. The saline groundwater found below the fresh deep aquifer have marine water entrapped during late Pleistocene. The source of high sulphate in the groundwater is of marine origin. In the second case, under the host rock characterization programme, the charnockite rock formation at Kokkilimedu, Kalpakkam was evaluated to assess its suitability as host medium for location of a geological repository for high level radioactive waste. Four deep boreholes were drilled in this area, the depth varying from 200 to 618 m. In these boreholes, large variations in groundwater salinity were observed over a distance of only a few hundred meters and no regional pattern could be identified. The results of the isotope investigation show that there are two different sources of salinity in this area. Among

The stable isotope fingerprinting technique for agricultural pesticide

Science.gov (United States)

Suto, N.; Kawashima, H.

2014-12-01

The compound specific isotope analysis (CSIA) is nowadays an important and powerful tool in geochemical, environmental, and forensics field. In particular, the stable isotope ratio of pesticide is applied to biological process and reaction in the soil and distribution channel as forensics science. The aim of this study is to measure the stable isotope ratios of pesticide using various analytical methodologies, GC/IRMS, EA/IRMS, and LC/IRMS under high accuracy and precision. Therefore, these methods seemed to be important knowledge as geological field. In particular case, we present the method to measure carbon isotope ratio of nine malathion emulsion pesticides using GC/IRMS with cryo-focusing system to identify the source. In December 2013, food poisoning occurred after eating frozen dumplings (i.e., pizza and chicken nuggets) in Japan. There was a very high concentration, maximum value 15,000ppm, of malathion (diethyl (dimethoxythiophosphorylthio) succinate) in products. This incident was caused by an employee of process, and threatened the food safety. We analyzed the δ13C of malathion ranged from -30.63‰ to -29.54‰ (S.D. 0.10‰), the differences less than 1.0‰. All malathion emulsion sold in Japan are imported from Cheminova India Lat., Denmark to Sumitomo Chemical Co. Ltd., Japan. After that, Japanese each manufacture buy from Sumitomo Chemical Co. Ltd. And blended malathion and organic solvent (ethylbenzene and xylene). Therefore, ethylbenzene and xylene may be important tool as source identification. We measured the δ13C of ethylbenzene and m-,p-xylene, too. As the results, the δ13C of ethylbenzene and m-,p-xylene ranged from -28.20‰ to -20.84‰ (S.D. 0.16‰), -28.69‰ to -25.15‰ (S.D. 0.13‰), respectively. The δ13C of ethylbenzene and m-,p-xylene can be identified manufacture, although the δ13C of malathion indicated same value. In addition, we measured five pesticides (acephate, acetamiprid, glufosinate, glyphosate, and oxamyl) using

Environmental isotope-aided studies on river water and groundwater interaction in the region of Seoul and Taegu

International Nuclear Information System (INIS)

Jong Sung Ahn

1987-09-01

The report provides the results and evaluations of environmental isotope analyses (O-18, H-2, H-3) undertaken in detailed field investigations carried out in the Han River Basin to study the hydrodynamics of river water and groundwater interrelationships. The conducted study, particularly near the Seoul area and the Taegu area, has enabled the delineation of the origin of groundwater in crystalline rock aquifers and limestone aquifers of the Han River Basin and evaluations as regards the groundwater flow dynamics based on environmental isotope data are given in the report. Refs, figs, tabs

Stable isotopes and the environment

International Nuclear Information System (INIS)

Krouse, H.R.

1990-01-01

Whereas traditionally, stable isotope research has been directed towards resource exploration and development, it is finding more frequent applications in helping to assess the impacts of resource utilization upon ecosystems. Among the many pursuits, two themes are evident: tracing the transport and conversions of pollutants in the environment and better understanding of the interplay among environmental receptors, e.g. food web studies. Stable isotope data are used primarily to identify the presence of pollutants in the environment and with a few exceptions, the consequence of their presence must be assessed by other techniques. Increasing attention has been given to the isotopic composition of humans with many potential applications in areas such as paleodiets, medicine, and criminology. In this brief overview examples are used from the Pacific Rim to illustrate the above concepts. 26 refs., 1 tab., 3 figs

Introduction to Body Composition Assessment Using the Deuterium Dilution Technique with Analysis of Urine Samples by Isotope Ratio Mass Spectrometry

International Nuclear Information System (INIS)

2010-01-01

The IAEA has fostered the more widespread use of a stable isotope technique to assess body composition in different population groups to address priority areas in public health nutrition in Member States. It has done this by supporting national and regional nutrition projects through its technical cooperation programme and coordinated research projects over many years. This publication was developed by an international group of experts to provide practical hands-on guidance in the use of this technique in settings where analysis of stable isotope ratios in biological samples is to be made by isotope ratio mass spectrometry. The publication is targeted at new users of this technique, for example nutritionists, analytical chemists and other professionals. More detailed information on the theoretical background and the practical applications of state of the art methodologies to monitor changes in body composition can be found in IAEA Human Health Series No. 3, Assessment of Body Composition and Total Energy Expenditure in Humans by Stable Isotope Techniques

Isotope hydrology: Investigating groundwater contamination

International Nuclear Information System (INIS)

Dubinchuk, V.; Froehlich, K.; Gonfiantini, R.

1989-01-01

Groundwater quality has worsened in many regions, with sometimes serious consequences. Decontaminating groundwater is an extremely slow process, and sometimes impossible, because of the generally long residence time of the water in most geological formations. Major causes of contamination are poor groundwater management (often dictated by immediate social needs) and the lack of regulations and control over the use and disposal of contaminants. These types of problems have prompted an increasing demand for investigations directed at gaining insight into the behaviour of contaminants in the hydrological cycle. Major objectives are to prevent pollution and degradation of groundwater resources, or, if contamination already has occurred, to identify its origin so that remedies can be proposed. Environmental isotopes have proved to be a powerful tool for groundwater pollution studies. The IAEA has had a co-ordinated research programme since 1987 on the application of nuclear techniques to determine the transport of contaminants in groundwater. An isotope hydrology project is being launched within the framework of the IAEA's regional co-operative programme in Latin America (known as ARCAL). Main objectives are the application of environmental isotopes to problems of groundwater assessment and contamination in Latin America. In 1989, another co-ordinated research programme is planned under which isotopic and other tracers will be used for the validation of mathematical models in groundwater transport studies

The use of environmental isotopes on groundwater hydrology in the selected areas in Thailand

International Nuclear Information System (INIS)

Buapeng, S.

1990-11-01

A detailed environmental isotope investigation (using 0-18, H-2, H-3, C-14 and C-13 isotopes) has been carried out in a multi-layer aquifer system of the Chao-Phraya basin in Thailand. The main emphasis of the applied field research has been placed on the delineation of genesis of water and on studying the regional replenishment and flow characteristics of the groundwater in the lower Chao-Phraya basin (Bangkok Metropolitan Area). The results of isotope data gathered have been evaluated along with hydrochemical and basic hydrogeological data, to provide quantitative information on the replenishment characteristics of the groundwater and on the cause and processes involved in the increase of salinity being observed in the groundwater system of the Bangkok area. The report provides all the isotopic results and other relevant data together with interpretation and evaluation of the results. Refs, figs and tabs

Environmental Isotope Characteristics of Landfill Leachates and Gases

Science.gov (United States)

Hackley, Keith C.; Liu, Chao-Li; Coleman, D.D.

1996-01-01

The isotopic characteristics of municipal landfill leachate and gases (carbon dioxide and methane) are unique relative to the aqueous and gaseous media in most other natural geologic environments. The ??13 C of the CO2 in landfills is significantly enriched in 13C, with values as high as +20??? reported. The ?? 13C and ??D values of the methane fall within a range of values representative of microbial methane produced primarily by the acetate-fermentation process. The ??D of landfill leachate is strongly enriched in deuterium, by approximately 30??? to nearly 60??? relative to local average precipitation values. This deuterium enrichment is undoubtedly due to the extensive production of microbial methane within the limited reservoir of a landfill. The concentration of the radiogenic isotopes, 14C and 3H, are significantly elevated in both landfill leachate and methane. The 14C values range between approximately 120 and 170 pMC and can be explained by the input of organic material that was affected by the increased 14C content of atmospheric CO2 caused by atmospheric testing of nuclear devices. The tritium measured in leachate, however, is often too high to be explained by previous atmospheric levels and must come from material buried within the landfill. The unique isotopic characteristics observed in landfill leachates and gases provide a very useful technique for confirming whether contamination is from a municipal landfill or some other local source.

Environmental isotope data no.1: World survey of isotope concentration in precipitation (1953-1963)

International Nuclear Information System (INIS)

1969-01-01

This volume reports environmental isotope (tritium, deuterium and oxygen-18) concentrations in monthly samples of precipitation taken by a global network of 155 stations in the period 1953-1963. Selected meteorological data (amount of precipitation, vapour pressure and temperature) are presented to aid the user in hydrological and hydrometerological studies. The collection of the precipitation samples is carried out by the meteorological services of 65 countries and territories. Analyses of the network samples are done in co-operating laboratories in Canada, Denmark, India, Israel, New Zealand, Sweden and the United States of America and in the IAEA laboratory in Vienna. 4 refs, 2 figs

Isotopic Determination of Nuclear Materials Using Nuclear Fission Track Registration Technique and Thermal Ionization Mass Spectrometric Technique

International Nuclear Information System (INIS)

Jeon, Young Sin; Pyo, Hyeong Yeol; Park, Yong Joon; Song, Kyu Seok; Kim, Won Ho; Jee, Kwang Yong

2007-05-01

It is very important to develope the technology for the determination of isotopic ratios of hot particles( 234 U, 235 U, 236 U etc.) detected from swipe samples of various nuclear facilities. This technology is highly competitive internationally and has to be established independently as long as our government maintains atomic energy and treats nuclear materials. In this text, sample pretreatment procedure, gamma-ray counting, alpha or fission track techniques, isotopic analysis of U and Pu, background problems and detection limits for mass determination, and their application to the real swipe sample were described with detailed procedure. This technology would contribute to the Korean economy's high growth rate as well as to superiority of government's leading research and development programs if successfully established

Importance of isotope hydrology techniques in water resources management: A case study of the Makutupora basin in Tanzania

International Nuclear Information System (INIS)

Senguji, F.H.

1999-01-01

Makutupora groundwater basin has been the main source of water supply for Dodoma town since 1950s. the water is mainly used for domestic water supply to over one million inhabitants, for industrial purposes and livestock watering. Conventional hydrogeological investigations have been carried out in the basin to gather information on the groundwater potential of the basin to meet the ever-increasing demand for water. However, firm conclusions could not be reached with conventional methods. This paper highlights on the isotope techniques applied in an integrated manner with conventional hydrogeological methods to study the groundwater regime of the Makutupora basin. Results of isotope techniques have provided adequate information on recharge locations, recharge rates and age of groundwater in the basin, that is very important and open up prospects for further investigations using isotope techniques. The ongoing investigation in the basin regarding pollution and depletion of the groundwater resource, has not succeeded in defining specific pumping limits or groundwater protection zones. Isotope data are sought to provide a clear basis for regulatory and future groundwater management in the Makutupora basin. (author)

Second international conference on isotopes. Conference proceedings

International Nuclear Information System (INIS)

Hardy, C.J.

1997-10-01

The Second International Conference on Isotopes (2ICI) was hosted by the Australian Nuclear Association in Sydney, NSW, Australia. The Theme of the Second Conference: Isotopes for Industry, Health and a Better Environment recognizes that isotopes have been used in these fields successfully for many years and offer prospects for increasing use in the future. The worldwide interest in the use of research reactors and accelerators and in applications of stable and radioactive isotopes, isotopic techniques and radiation in industry, agriculture, medicine, environmental studies and research in general, was considered. Other radiation issues including radiation protection and safety were also addressed. International and national overviews and subject reviews invited from leading experts were included to introduce the program of technical sessions. The invited papers were supported by contributions accepted from participants for oral and poster presentation. A Technical Exhibition was held in association with the Conference. This volume contains the foreword, technical program, the author index and of the papers (1-60) presented at the conference

Second international conference on isotopes. Conference proceedings

Energy Technology Data Exchange (ETDEWEB)

Hardy, C J [ed.

1997-10-01

The Second International Conference on Isotopes (2ICI) was hosted by the Australian Nuclear Association in Sydney, NSW, Australia. The Theme of the Second Conference: Isotopes for Industry, Health and a Better Environment recognizes that isotopes have been used in these fields successfully for many years and offer prospects for increasing use in the future. The worldwide interest in the use of research reactors and accelerators and in applications of stable and radioactive isotopes, isotopic techniques and radiation in industry, agriculture, medicine, environmental studies and research in general, was considered. Other radiation issues including radiation protection and safety were also addressed. International and national overviews and subject reviews invited from leading experts were included to introduce the program of technical sessions. The invited papers were supported by contributions accepted from participants for oral and poster presentation. A Technical Exhibition was held in association with the Conference. This volume contains the full text or extended abstracts of papers number 61- to number 114

Second international conference on isotopes. Conference proceedings

Energy Technology Data Exchange (ETDEWEB)

Hardy, C J [ed.

1997-10-01

The Second International Conference on Isotopes (2ICI) was hosted by the Australian Nuclear Association in Sydney, NSW, Australia. The Theme of the Second Conference: Isotopes for Industry, Health and a Better Environment recognizes that isotopes have been used in these fields successfully for many years and offer prospects for increasing use in the future. The worldwide interest in the use of research reactors and accelerators and in applications of stable and radioactive isotopes, isotopic techniques and radiation in industry, agriculture, medicine, environmental studies and research in general, was considered. Other radiation issues including radiation protection and safety were also addressed. International and national overviews and subject reviews invited from leading experts were included to introduce the program of technical sessions. The invited papers were supported by contributions accepted from participants for oral and poster presentation. A Technical Exhibition was held in association with the Conference. This volume contains the foreword, technical program, the author index and of the papers (1-60) presented at the conference.

Nuclear and isotopic techniques underpinning probabilistic ecological risk analysis in coastal marine systems

International Nuclear Information System (INIS)

Szymczak, R.; Twining, J.; Hollins, S.; Hughes, C.; Mazumder, D.; Alquezar, R.

2006-01-01

Full text: The historical operation of manufacturing, chemical and other industries in the Sydney Harbour catchment over many decades has left a legacy of high chemical contamination in the surrounding catchment, such that a recent report describes Port Jackson as one of the most contaminated harbours in the world (Birch and Taylor, 2005). The legacy in Homebush Bay is amongst the worst in the harbour and presents a considerable management problem. Elucidation of environmental processes is the key to effective ecosystem management, however few tools are available to determine their inter-relationships, rates and directions. This study has four components: (1) determination of linkages between high trophic order species and different habitats resources using stable isotopic analyses of carbon and nitrogen. These studies identify trophic cascades forming the basis for selection of biota for contaminant transfer experiments; (2) short-term (weeks - months) chronology and geochemistry of sediment cores and traps in Homebush Bay to determine rates of sedimentation and resuspension (using environmental/cosmogenic Be). Models derived from these studies provide the contaminants levels against which risk is assessed; (3) biokinetic studies using proxy radiotracer isotopes (eg. 75 Se and 109 Cd for analogous stable metals) of the uptake and trophic transfer of contaminants by specific estaurine biota. Here we identify the rates and extent to which contaminants accumulated and transferred to predators/seafoods; and (4) application of a probabilistic ecological risk assessment model (AQUARISK) set to criteria determined by stakeholder consensus. In this study we analysed the distribution of natural isotopes and redistribution of artificial isotopes injected into ecological compartments to determine the key trophic linkages and contaminant pathways in an estuarine system and contribute to improving the accuracy and specificity of a probabilistic ecological risk assessment

Managing water resources in Malaysia: the use of isotope technique and its potential

International Nuclear Information System (INIS)

Keizrul Abdullah

2006-01-01

This keynote address discusses the following subjects; state of Malaysia water resources, water related problem i.e floods, water shortage (droughts), water quality, river sedimentation, water resources management and the ongoing and potential application of isotope techniques in river management

Isotope-dilution analyses of the metallic elements

International Nuclear Information System (INIS)

Chastagner, P.

1982-01-01

The isotope-dilution mass spectroscopy (IDMS) technique has proven to be to be a reliable, versatile analytical tool. Its applications seem to be limited only by the ingenuity of the investigator. Among its advantages are: small sample size; general applicability; precision and accuracy; dynamic range; simplified chemistry; determination is fixed at the time and place of isotopic homogenization. The last listed item is especially important for nuclear safeguards and processes where inventories are critical. IDMS is now a routine analytical technique in geochemical and nuclear laboratories, and in many environmental laboratories. Microgram and nanogram samples are normally used, frequently with automatic mass spectrometers, in many of these routine applications. More advanced techniques permit picogram and sub picogram samples to be analyzed, and spike to sample ratios can range from 1:1 to 1:10 12 with detection limits at attogram levels for some elements. 3 figures, 3 tables

An isotope-aided study on the interaction of surface water and groundwater

International Nuclear Information System (INIS)

Ahn, Jong Sung; Kim, Jong Hoon; Yun, Si Tae; Jeong, Chan Ho; Kim, Kae Nam

1987-12-01

The interaction between surface water and groundwater was studied by isotope-aided techniques in the vicinity of the KAERI area. The understanding of surface water and groundwater flow systems and the analysis of geomaterials which provide the pathway of groundwater is important for the hydrogeological safety assessment of the radioactive waste disposal. The results of the analyses of environmental isotopes have shown that the shallow groundwater in this area was originated from the meteoric water which is infiltrated rapidly into the subsurface materials. The higher content of the environmental isotopes in some groundwater samples indicate that this anomalous values is attributed to impermeable, fine-grained materials. Also, the results of hydrochemical analyses of water samples indicate that shallow groundwater and precipitation are well mixed. (Author)

Electron-capture negative-ion mass spectrometry: a technique for environmental contaminant identification

International Nuclear Information System (INIS)

Stemmler, E.A.

1986-01-01

Electron capture negative ion mass spectrometry (ECNIMS) is a method used to generate negative ions in a mass spectrometer by electron-molecule reactions. This technique facilitates the sensitive and selective detection of many toxic contaminants in environmental samples. Applications of this technique have been hindered by the limited understanding of instrumental parameters, by the questionable reproducibility of negative ion mass spectra, and by the inability to interpret negative ion mass spectra. Instrumental parameters which were important to control include the ion source temperature, ion source pressure, sample concentration, and the focus lens potential. The ability to obtain reproducible spectra was demonstrated by measurement of the spectrum of decafluorotriphenylphosphine (DFTPP) over a period of one year. Negative ion fragmentation mechanisms were studied by measuring the spectra of structurally related classes of compounds and isotopically labelled compounds. These results were combined with data obtained by other researchers. Fragmentations characteristic of particular functional groups or molecular structures have been summarized. From this data set, guidelines for the interpretation of electron capture negative ion mass spectra have been developed

Model project for the pollution investigation of a lake. The use of nuclear techniques for environmental risk assessment

International Nuclear Information System (INIS)

Goektepe, B. G.; Borak, F.; Fowler, S.; Yilmaz Erkol, A.

2002-01-01

Environmental pollution monitoring and the protection of water resources are vital in terms of public health and economical consequences for many of the countries. The use of nuclear and isotopic techniques for pollution investigation of water resources on the other hand has been gaining more importance during the recent years. In recognition of the serious pollution problems of the surface water resources; a large scope multidisciplinary environmental management project with short title 'Lake Project' which is designed and developed by the group of scientists at the Cekmece Nuclear Research and Training Center of the Turkish Atomic Energy Authority is presented. This multidisciplinary project has various important aspects; scientific, social, economic, educational, cultural and political. Specific problem a dressed was the serious pollution of Kucukcekmece Lake due to high population and industrial growth in the region as well as creation of public awareness on the peaceful activities of the Cekmece Nuclear Research Center. The main objective was to promote the use of nuclear and isotopic techniques in the assessment of local, national and regional environmental pollution control and management. The project implementation was carried out in two phases and supported by the International Atomic Energy Agency. Water, biota and sediment samples were collected from several sampling stations seasonally. Some of the results are presented in tables for natural radioactivity, chemical and physical parameters. The first phases of the project has provided tools and methods for identifying types and magnitudes of contaminants in the Kucukcekmece Lake. Results obtained from the model project show that the radioactivity pollution levels have no significance in terms of human health and ecosystem. However, major problem regarding lake and marine environmental management is identified as eutrophication. This is a process of water quality degradation caused by mainly by domestic

Lead contamination and transfer in urban environmental compartments analyzed by lead levels and isotopic compositions

International Nuclear Information System (INIS)

Hu, Xin; Sun, Yuanyuan; Ding, Zhuhong; Zhang, Yun; Wu, Jichun; Lian, Hongzhen; Wang, Tijian

2014-01-01

Lead levels and isotopic compositions in atmospheric particles (TSP and PM 2.5 ), street dust and surface soil collected from Nanjing, a mega city in China, were analyzed to investigate the contamination and the transfer of lead in urban environmental compartments. The lead contents in TSP and PM 2.5 are significantly higher than them in the surface soil and street dust (p  206 Pb/ 207 Pb vs. 208 Pb/ 206 Pb and 206 Pb/ 207 Pb vs. 1/Pb imply that the street dust and atmospheric particles (TSP and PM 2.5 ) have very similar lead sources. Coal emissions and smelting activities may be the important lead sources for street dust and atmospheric particles (TSP and PM 2.5 ), while the deposition of airborne lead is an important lead source for urban surface soil. - Highlights: • Lead levels and isotope ratios in atmospheric particles, street dust and surface soil. • Significant enrichment of lead in atmospheric particles was observed. • Street dust and atmospheric particles have similar lead sources. • Endmembers of soil lead differ from street dust and atmospheric particles. • Airborne lead poses the main risks to unban environmental quality. - Transfer of airborne particle bound lead into street dust and surface soil in unban environmental based on lead levels and isotopic compositions

Use of hydrochemistry and environmental isotopes for evaluation of the hydrological connection between groundwater and wetland swamp Colombia

International Nuclear Information System (INIS)

Santa A, Diana P; Martinez F, Diana C; Betancur V, Teresita

2008-01-01

The understanding of water flow paths around a wetland is based on the hydrologic information interpretation. Although the incorporation of non-conventional techniques like hydrochemistry and isotopic hydrology allows a major compression level of hydrologic systems: They allow identify origin and evolution of water, movement times, permanence in the hydrologic cycle components. Cienaga Colombia wetland and its catch area, represent a strategic ecosystem located in the Bajo Cauca antioqueno. The natural conditions and the consequences of the human intervention on the wetland impose the need to approach its study and understanding, seeking to be able lo design effective measures to guarantee its sustainability. We presents the firsts results of the project developed by Antioquia University and IAEA: Hydrochemical and Isotopic techniques for the assessment of hydrological processes in the wetlands of Bajo Cauca Antioqueno which is part of the program: Isotopic techniques for assessment of hydrological processes in wetlands by International Atomic Energy Agency, IAEA. The general objective of the study is evaluate the dynamic of water flow, in and out of the wetland in the Bajo Cauca Antioqueno, using geochemical and isotopic techniques.

Isotopes in the earth sciences

Energy Technology Data Exchange (ETDEWEB)

Bowen, Robert

1988-01-01

This book examines significant aspects of isotope applications in geology and geochemistry commencing with basic matters, such as atomic structure, stable nuclides and their fractionation, as well as the various decay modes of unstable nuclides. Modern mass spectrometry techniques including electrostatic tandem accelerators are followed by a review of radioisotope dating technology. The relatively new method using the rare earth elements samarium and neodymium are covered. Other geochronometers, applicable to both rocks and minerals not dateable otherwise, are included. A review is given of isotopes in the atmosphere, hydrosphere and lithosphere of the Earth. Those of oxygen and hydrogen together with the cosmogenic radionuclides tritium and radiocarbon are discussed in relation to the biosphere. The role of isotopes of carbon, nitrogen and sulphur is described and extended to fossil fuels and rocks as well as meteorites. Related themes such as Phanerozoic oceans, oceanic palaeothermometry, snow and ice stratigraphy and geothermal waters are covered. The field of isotopic palaeoecology is discussed. Radioactive wastes, their accumulation, dangers and disposal are investigated with especial reference to their environmental impacts.

Models for the runoff from a glaciated catchment area using measurements of environmental isotope contents

International Nuclear Information System (INIS)

Behrens, H.; Moser, H.; Oerter, H.; Rauert, W.; Stichler, W.; Ambach, W.; Kirchlechner, P.

1979-01-01

For several years, in the glaciated catchment area of the Rofenache (Oetztal Alps, Austria), measurements have been made of the environmental isotopes 2 H, 18 O and 3 H in precipitation, snow and ice samples and in the runoff. Furthermore, the electrolytic conductivity of runoff samples was measured and tracing experiments were made with fluorescent dyes. From core samples drilled in the accumulation area of the Vernagtferner, the gross beta activity was investigated and compared with the data from 2 H, 3 H and 18 O analyses and the data from mass balance studies. It is shown that the annual net balance from previous years can be recovered on temperate glaciers using environmental isotope techniques. From the diurnal variations of the 2 H and 3 H contents and the electrolytic conductivity, the following proportions in the runoff of the Vernagtferner catchment area were obtained during a 24-hour interval at a time of strong ablation (August 1976): about 50% ice meltwater, 25% direct runoff of firn and snow meltwater, and 7% of mineralized groundwater. The rest of the runoff consists of non-mineralized meltwater seeping from the glacier body. The annual variations of the 2 H and 3 H contents in the runoff of the glaciated catchment area permit conclusions on the time sequence of the individual ablation periods, and on the residence time, on the basis of model concepts. The residence times of approximately 100 days or four years, respectively, are obtained from the decrease in the 2 H content at the end of the ablation period and from the variation of the 3 H content in the winter discharge. (author)

Addressing national priorities through nuclear technology: Application of stable isotope techniques in evaluating nutritional intervention programs

International Nuclear Information System (INIS)

Mwangi, C.; Ndemwa, P.

2008-01-01

The concept is a new concept in Kenya that need driven technology. A paradigm shift from the conventional methods of measuring breast milk intake by means of weighing infants before and after feeding. A validation tool against anthropometrical measures of body fat through body density and skin-fold measurements. A reliable, accurate and non-invasive tool for monitoring lean body mass changes in clinical assessments.Isotopes Techniques in Body composition assessment.Technique-based Parameters of efficacy and/or effect are: Isotope (deuterium) dose given orally to subject (about 30 grams),Saliva (or urine) samples collected after 3-4 hrs, Concentration of isotope in saliva is measured using Fourier Transformed Infra-red Spectrophotometer (FTIR), Concentration gives the Total Body Water (TBW) component in the body, TBW = 73% Fat Free Mass (FFM), Calculate FFM (kg) from equation and subtract from Total Body Weight (kg) to get value of Fat Mass (kg)

Determination of plutonium isotopes (238Pu, 239Pu, 240Pu, 241Pu) in environmental samples using radiochemical separation combined with radiometric and mass spectrometric measurements.

Science.gov (United States)

Xu, Yihong; Qiao, Jixin; Hou, Xiaolin; Pan, Shaoming; Roos, Per

2014-02-01

This paper reports an analytical method for the determination of plutonium isotopes ((238)Pu, (239)Pu, (240)Pu, (241)Pu) in environmental samples using anion exchange chromatography in combination with extraction chromatography for chemical separation of Pu. Both radiometric methods (liquid scintillation counting and alpha spectrometry) and inductively coupled plasma mass spectrometry (ICP-MS) were applied for the measurement of plutonium isotopes. The decontamination factors for uranium were significantly improved up to 7.5 × 10(5) for 20 g soil compared to the level reported in the literature, this is critical for the measurement of plutonium isotopes using mass spectrometric technique. Although the chemical yield of Pu in the entire procedure is about 55%, the analytical results of IAEA soil 6 and IAEA-367 in this work are in a good agreement with the values reported in the literature or reference values, revealing that the developed method for plutonium determination in environmental samples is reliable. The measurement results of (239+240)Pu by alpha spectrometry agreed very well with the sum of (239)Pu and (240)Pu measured by ICP-MS. ICP-MS can not only measure (239)Pu and (240)Pu separately but also (241)Pu. However, it is impossible to measure (238)Pu using ICP-MS in environmental samples even a decontamination factor as high as 10(6) for uranium was obtained by chemical separation. © 2013 Elsevier B.V. All rights reserved.

The Use of Isotope Techniques to Separate of Hydrography Components. Case Study: Ankara-Guvenc Basin

International Nuclear Information System (INIS)

Tekeli, Y.I.; Sorman, A.U.; Sayin, M.

2002-01-01

In this research, a stable environmental isotope study was carried out from analysis of water samples collected from rainfall, runoff (total discharge), springs (subsurface flows), and wells (ground waters)in Ankara-Guevenc basin having a drainage area of about 16.125 km 2 between 1996-2000. The aim of the study was to investigate the rainfall-runoff relationship for the basin. Recorded total ten discharge hydrographs are separated to their components using stable isotopes (Oxygen-18, Deuterium) contents. Among these samples, unit hydrographs from two one-peak storm hydrographs were derived using both isotope and graphical methods, and the derived unit hydrographs values including peaks were compared. Peak values of 10 and 20 minutes unit hydrographs of the basin derived by using isotope method (Q p = 1322 1/s and Q p = 1327 l/s) are compared with those of graphical method (Q p = 1656 1/s, and Q p = 1250 1/s) using Barnes semi-log approach. It was found out that, the contribution of subsurface flow which is component of total discharge hydrograph and originating from various sub layers are important in the total flow of basin using isotope method of approach

Analytical pyrolysis and stable isotope analyses reveal past environmental changes in coralloid speleothems from Easter Island (Chile).

Science.gov (United States)

Miller, Ana Z; De la Rosa, José M; Jiménez-Morillo, Nicasio T; Pereira, Manuel F C; González-Pérez, José A; Calaforra, José M; Saiz-Jimenez, Cesareo

2016-08-26

This study comprises an innovative approach based on the combination of chromatography (analytical pyrolysis and pyrolysis compound-specific isotope analysis (Py-CSIA)), light stable isotopes, microscopy and mineralogy analyses to characterize the internal layering of coralloid speleothems from the Ana Heva lava tube in Easter Island (Chile). This multidisciplinary proxy showed that the speleothems consist of banded siliceous materials of low crystallinity with different mineralogical compositions and a significant contribution of organic carbon. Opal-A constitutes the outermost grey layer of the coralloids, whereas calcite and amorphous Mg hydrate silicate are the major components of the inner whitish and honey-brown layers, respectively. The differences found in the mineralogical, elemental, molecular and isotopic composition of these distinct coloured layers are related to environmental changes during speleothem development. Stable isotopes and analytical pyrolysis suggested alterations in the water regime, pointing to wetter conditions during the formation of the Ca-rich layer and a possible increase in the amount of water dripping into the cave. The trend observed for δ(15)N values suggested an increase in the average temperature over time, which is consistent with the so-called climate warming during the Holocene. The pyrolysis compound-specific isotope analysis of each speleothem layer showed a similar trend with the bulk δ(13)C values pointing to the appropriateness of direct Py-CSIA in paleoenvironmental studies. The δ(13)C values for n-alkanes reinforced the occurrence of a drastic environmental change, indicating that the outermost Opal layer was developed under drier and more arid environmental conditions. Copyright © 2016 Elsevier B.V. All rights reserved.

Environmental isotope techniques in hydrological study of Mouh-Sebkha basin (Syria)

International Nuclear Information System (INIS)

Aby Zakhem, B.

2000-01-01

Al-Mouh Sebkha is considered as one of the biggest and most important sebkha in Syria, it presents the local hydrological basis and the final drainage area of surface basin terminated in sebkha that dries in the Summer but the GW. is still very near from the surface. The depth of shallow GW. is between 0.5 and 2 m. The aquifer consisted of quaternary debris which is sand and sandy clay with lentil shape gypsum crystals sometimes have gravel shape. The salinity of water in the sebkha reached 200 g/l. Generally, this water is sodium chloride or calcium sulfates characterized by very strong smell of H 2 S gas in the border of sebkha there are many fresh aquifers, however, the deep aquifers are artesian relatively fresh and good for agricultural purposes. Two isotopic profiles (S, P) were drilled for preliminary estimation of evaporation values through unsaturated zone in the sebkha, to apply the hydrochemical model for mixing ratio estimation between the sallow water and the artesian upper cretaceous aquifer without the evaporation process, and with an extensive evaporation process, with precipitation of mineral phases in the sebkha. The isotopic enrichment pic was determined for O-18 and D that is caused by evaporation through unsatured zone, it was at the 12 cm depth, the main evaporation front is located between the surface and 45 cm depth, the lower part of the unsaturated zone profile is affected by the capillary effect, where there is upward vertical movement. The evaporated water quantity through unsaturated zone in the sebkha was determined about 18 m. m 3 /y using Barnes and Allison model, in addition to the direct evaporation quantity from the water surface in the flood period, and from the salt masles. The mixing ratios in the sebkha were evaluated using Hydrowin and netpath programs, was about 15 - 20 % from surface water and 80 - 85 % from G.W. in the upper cretaceous artesian aquifer through the upward infiltration. The mixing with extensive evaporation

Aspects of the environmental isotope chemistry in groundwaters in Eastern Jordan

International Nuclear Information System (INIS)

Lloyd, J.W.

1980-01-01

Aspects of the environmental isotope data from a sandstone and a limestone aquifer are given. The data concerning the sandstone are limited but indicate the type of recharge that is occurring in the outcrop area. Although the 14 C data indicate some modern recharge in radiocarbon terms the tritium data show evidence of only localized recharge. Stable isotope data from one well indicate that indirect recharge may be important. In the limestone aquifer it is found that tritiated groundwater occurs chiefly in the vicinity of wadis indicating the importance of indirect recharge. The lack of tritiated groundwater in the 'recharge mounds' in the interfluve areas is seen as partly a function of sampling but also as indicating the high permeability zones at the tops of the aquifers. The delta 13 C data distribution are examined with respect to possible recharge mechanisms. (author)

Salars evaporation rates evaluation using isotope techniques, Bellavista Salar, Chile

International Nuclear Information System (INIS)

Grilli, A.; Ortiz, J.

1989-01-01

Long term evaporation rates are evaluated in different soil conditions at Bellavista Salar, using environmental isotope profiles (oxygen-18) of the unsaturated soil zone. The Barnes and Allison model was adapted to stratified soils under non-saturation conditions and for a non-isothermal permanent regime. To apply the proposed model, field data of the different variables were used and the evaporation rates were obtained adjunting the δ 18 O values generated by the model to those experimentally measured in the water extracted from the soil profile of the unsaturated soil zone. (author). 13 refs, 8 figs

Mutual complementation between water chemistry and isotope techniques

International Nuclear Information System (INIS)

Matthess, G.

1976-01-01

In the water chemistry and isotope methods which applied together enable more extensive statements to be made than each on its own, the following regions of cooperation are brought out: 1) Isotopes as conservative indicators a) microbial decomposition of organic substances in the anaerobic and aerobic region; b) precipitation and coprecipitation; c) mechanical filtration, adsorption and coprecipitation; d) gas exchange; e) dilution by infiltration; 2) geochemical observations as additional basis for isotope investigations; 3) the investigation of the water content substances as additional help to isotope hydrology. (HK/LH) [de

Determination of natural alpha-emitting isotopes of uranium and thorium in environmental and geological samples

International Nuclear Information System (INIS)

Crespo, M.T.

1996-01-01

It is described the complete radiochemical procedure used for the determination of uranium and thorium isotopes in environmental and geological samples by alpha spectrometry. Source preparation methods, alpha-counting and spectral analysis are also included

Application of isotope tracer technique on the study of the filling and release behavior of carbon nanotubes

International Nuclear Information System (INIS)

Wu Shengwei; Guo Jinxue; Li Yan; Li Yulan; Li Wenxin; Liu Shiyuan

2004-01-01

The behaviors of washing and release of 110 Ag m -AgNO 3 from carbon nanotubes (CNTs), following soak of opened CNTs in 110 Ag m -AgNO 3 solutions are investigated with the isotope tracer technique. The filled CNTs samples are characterized by HREM, SEM, XRD and EDS. The amount of filled materials is also estimated by the isotope tracer technique. It shows that there are silver materials filled in the CNTs and would not release from the cavities. The results indicate that radioactive tracer is an effective and powerful technique to be applied into study of filling and release behaviors of CNTs as well as estimating the amount of filled materials. (authors)

Stable isotopes in speleothems as proxies of past environmental changes in the Alps

International Nuclear Information System (INIS)

Spoetl, C.; Burns, S.J.; Mangini, A.

2002-01-01

This short communication presents preliminary results and interpretations from an ongoing research project in the Obir Cave of southeast Austria. This cave system hosts abundant calcite dripstones many of which are actively forming today. The stable isotopic composition of a Holocene stalagmite dated by U-series TIMS techniques shows rather stable values throughout most of the last eight millennia, except for the last few hundred years when both C and O isotope values strongly increase (probably due to changes in the cave air circulation as a result of mining activity). (author)

Pu abundances, concentrations, and isotopics by x- and gamma-ray spectrometry assay techniques

International Nuclear Information System (INIS)

Camp, D.C.; Gunnink, R.; Ruhter, W.D.; Prindle, A.L.; Gomes, R.J.

1986-01-01

Two x- and gamma-ray systems were recently installed at-line in gloveboxes and will measure Pu solution concentrations from 5 to 105 g/L. These NDA technique, developed and refined over the past decade, are now used domestically and internationally for nuclear material process monitoring and accountability needs. In off- and at-line installations, they can measure solution concentrations to 0.2%. The K-XRFA systems use a transmission source to correct for solution density. The gamma-ray systems use peaks from 59- to 208-keV to determine solution concentrations and relative isotopics. A Pu check source monitors system stability. These two NDA techniques can be combined to form a new, NDA measurement methodology. With the instrument located outside of a glovebox, both relative Pu isotopics and absolute Pu abundances of a sample located inside a glovebox can be measured. The new technique works with either single or dual source excitation; the former for a detector 6 to 20 cm away with no geometric corrections needed; the latter requires geometric corrections or source movement if the sample cannot be measured at the calibration distance. 4 refs., 7 figs., 2 tabs

Room temperature Sieving of Hydrogen Isotopes Using 2-D Materials

Energy Technology Data Exchange (ETDEWEB)

Hitchcock, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Colon-Mercado, H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Krentz, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Serkiz, S. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Velten, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Xiao, S. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2017-09-28

Hydrogen isotope separation is critical to the DOE’s mission in environmental remediation and nuclear nonproliferation. Isotope separation is also a critical technology for the NNSA, and the ability to perform the separations at room temperature with a relatively small amount of power and space would be a major advancement for their respective missions. Recent work has shown that 2-D materials such as graphene and hexagonal boron nitride can act as an isotopic sieve at room temperature; efficiently separating hydrogen isotopes in water with reported separation ratios of 10:1 for hydrogen: deuterium separation for a single pass. The work performed here suggests that this technique has merit, and furthermore, we are investigating optimization and scale up of the required 2-D material based membranes.

Use of the HRICP-MS technique for the evaluation of boron isotopes in Eucalitpus plants

International Nuclear Information System (INIS)

Mattiello, Edson Marcio; Ruiz, Hugo Alberto; Silva, Ivo Ribeiro da

2011-01-01

The 10 B isotope tracer technique is essential to study the B mobility in plants. Factors that can influence the quality of measured B isotope ratios were optimized experimentally using High Resolution Inductively Coupled Plasma Mass Spectrometry (HRICP-MS). An isotopically certified standard (NIST SRM-951) was used. The best combination was obtained using a resolution of 400, a RF power of 1250 W, followed by 15 measurements over a 10-s integration period each (15*10). Utilizing this approach it was possible to obtain a precision of 0.3 % in standard material and 2z % in the experimental samples. The results show the importance of establishing optimized work conditions before carrying out the analytical series. (author)

Isotope-based immunological techniques. Their use in assessment of immune competence and the study of immune responses to pathogens

International Nuclear Information System (INIS)

Duffus, W.P.H.

1984-01-01

The influence of isotope-based techniques on both assessment of immune competence and immune response to pathogens is discussed. Immunodeficiencies acquired as a result of factors like malnutrition and concomitant disease can severely affect not only attempts to intensify and improve production but also successful immune response against important vaccines such as rinderpest and foot-and-mouth disease. Isotope-based techniques, with their accuracy, speed and small sample volume, are ideally suited for assessing immunocompetence. One of the main drawbacks remains antigen purity, an area where research should now be concentrated. Lymphocyte transformation is widely used to assess cell-mediated immuno-competence but techniques to assess biological functions such as phagocytosis and cell-mediated cytotoxicity could more usefully reflect immune status. These latter techniques utilize isotopes such as 3 H, 14 C, 32 P and 125 I. Investigation of specific cell-mediated immune response often requires a labelled target. Suitable isotopes such as 51 Cr, 99 Tcsup(m), 75 Se and 3 H are compared for their capacity to label both mammalian and parasite targets. Suggestions are made on a number of areas of research that might usefully be encouraged and supported in order to improve applied veterinary immunology in tropical countries. (author)

Environmental isotope balance of Lake Kinneret as a tool in evaporation rate estimation

International Nuclear Information System (INIS)

Lewis, S.

1979-01-01

The balance of environmental isotopes in Lake Kinneret has been used to obtain an independent estimate of the mean monthly evaporation rate. Direct calculation was precluded by the inadequacy of the isotope data in uniquely representing the system behaviour throughout the annual cycle. The approach adopted uses an automatic algorithm to seek an objective best fit of the isotope balance model to measured oxygen-18 data by optimizing the evaporation rate as a parameter. To this end, evaporation is described as a periodic function with two parameters. The sensitivity of the evaporation rate estimates to parameter uncertainty and data errors is stressed. Error analysis puts confidence limits on the estimates obtained. Projected improvements in data collection and analysis show that a significant reduction in uncertainty can be realized. Relative to energy balance estimates, currently obtainable data result in about 30% uncertainty. The most optimistic scenario would yield about 15% relative uncertainty. (author)

Environmental isotopes, chemical composition and groundwater sources in Al-Maghara area, Sinai, Egypt

International Nuclear Information System (INIS)

Nada, A.A.; Awad, M.A.; Froehlich, K.; El Behery, M.

1991-01-01

Groundwater samples collected from a number of localities, in Al-Maghara area, north central part of Sinai, were subject to various chemical and isotopic analysis. The purpose of the study is to determine whether the groundwaters are recently recharged or not in order to adopt an efficient water management policy. The hydrochemical results indicate that they are mainly of primary marine origin, dilution of this water by meteoric water changes its chemical composition to be mixed water type, which has the major chemical components: KCl, NaCl, Na 2 SO 4 , MgSO 4 , Mg(HCO 3 ) 2 and Ca(HCO 3 ) 2 . The tritium content confirm the meteoric water recharge recently especially for wells with high tritium content. The stable environmental isotopic composition of the groundwater reflects the isotopic composition of precipitation and flooding with some evaporation enrichment prior to infiltration. There is also mixing with palaeowater (water recharge in the past cooler climate periods), by leaking through faulting in the area. (orig.) [de

Isotope separation

International Nuclear Information System (INIS)

Eerkens, J.W.

1979-01-01

A method of isotope separation is described which involves the use of a laser photon beam to selectively induce energy level transitions of an isotope molecule containing the isotope to be separated. The use of the technique for 235 U enrichment is demonstrated. (UK)

The use of environmental monitoring as a technique to identify isotopic enrichment activities; O uso da monitoracao ambiental como tecnica de identificacao de atividades de enriquecimento isotopico

Energy Technology Data Exchange (ETDEWEB)

Buchmann, Jose Henrique

2000-07-01

The use of environmental monitoring as a technique to identify activities related to the nuclear fuel cycle has been proposed, by international organizations, as an additional measure to the safeguards agreements in force. The elements specific for each kind of nuclear activity, or nuclear signatures, inserted in the ecosystem by several transfer paths, can be intercepted with better or worse ability by different live organisms. Depending on the kind of signature of interest, the anthropogenic material identification and quantification require the choice of adequate biologic indicators and, mainly, the use of sophisticated techniques associated with elaborate sample treatments. This work demonstrates the technical viability of using pine needles as bioindicators of nuclear signatures associated with uranium enrichment activities. Additionally, it proposes the use of a technique widely diffused nowadays in the scientific community, the High Resolution Inductively Coupled Plasma Mass Spectrometer (HR-ICP-MS), to identify the signature corresponding to that kind of activities in the ecosystem. It can be also found a description of a methodology recently being applied in analytical chemistry,based on uncertainties estimates metrological concepts, used to calculate the uncertainties associated with the obtained measurement results. Nitric acid solutions with a concentration of 0.3 mol.kg{sup -1}, used to wash pine needles sampled near facilities that manipulate enriched uranium and containing only 0.1 {mu}g.kg{sup -1} of uranium, exhibit a {sup 235} U: {sup 238} U isotopic abundance ratio of 0.0092{+-}0.0002, while solutions originated from samples collected at places located more than 200 km far from activities related to the nuclear fuel cycle exhibit a value of 0.0074{+-}0.0002 for this abundance ratio. Similar results were obtained for samples collected in different places permit to confirm the presence of anthropogenic uranium and demonstrate the viability of using

Application of Environmental Isotopes in Hydrological Studies Along the River Nile Valley, Egypt

Energy Technology Data Exchange (ETDEWEB)

Nada, A. A. [Site and Environmental Dept. NCNSRC, Atomic Energy Authority, Cairo (Egypt)

2013-07-15

This paper reviews some of the contributions of isotope techniques to better understanding hydrological problems in Egypt and the Nile basin. The stable isotope composition of precipitation shows considerable variations both in time and space since it is controlled by climatic factors. Surface waters became enriched in deuterium and oxygen-18 relative to their initial isotopic composition as losses by evaporation occur. The GNIP sampling stations at Entebbe and Addis Ababa, which are located at the source of the Nile River, present relatively depleted isotopic contents. Assuming that the central Africa runoff (White Nile downstream from Sudan) represents 30% of the natural discharge of Egypt, and the remaining 70% is derived from Ethiopia (Blue Nile), we obtain a composite depleted stable isotope composition of the river Nile reaching upper Egypt under natural conditions (before the construction of the Aswan High Dam). Stable isotopes were used to estimate the evaporation rate from Lake Nasser, based on the isotopic content of the lake water. The lake can be divided into two sectors: the first sector, with remarkable vertical gradient in O-18 and deuterium, and a second sector, characterized by a lower vertical isotopic gradient. In order to detect this effect, surface Nile water samples have been collected at Cairo after a heavy storm event covering all Egypt at the beginning of November 1994, characterized by very negative deuterium and oxygen-18 contents. The isotopic content of Nile water samples fluctuated and slightly changed with time. The variation of the bomb tritium response of the Nile has been reconstructed using a model based on the contents in the catchment areas of the Nile. Pre-bomb tritium content in the Nile was about 5 TU, reaching a maximum level during the early sixties of about 500 TU. At present the tritium level content of the Nile is about 6 TU. (author)

Assessment of groundwater salinization mechanisms in Santiago Island - Cabo Verde: An environmental isotopic approach

International Nuclear Information System (INIS)

Carreira, P.M.; Nunes, D.; Marques, J.M.; Pina, A.; Mota Gomes, A.; Almeida, E.; Goncalves, R.; Monteiro Santos, F.

2007-01-01

Two sampling campaigns were carried out at Santiago Island - Cabo Verde under the scope of an isotopic and geochemical research study. An evaluation of the groundwater systems was carried out through the application of environmental isotopes and geochemical data in order to answer questions such as: origin and mechanisms of groundwater recharge; relation between the hydrochemical evolution of the groundwater systems with the geological matrix (minerals dissolution) or mixture with seawater and aerosol marine influence; identification of seawater intrusion mechanisms and, determination of the apparent groundwater 'age'. The results obtained so far are not conclusive on the identification of the process responsible for the increase of salinity. In general, all the data obtained seems to indicate that the waters have the same isotopic history but different geochemical evolution, which depends on the weathering and permeability of the rocks. (author)

Environmental isotope studies on groundwater problems in the Thar Desert, India

International Nuclear Information System (INIS)

Nair, A.R.; Navada, S.V.; Rao, S.M.

1997-01-01

One of the groundwater problems encountered in arid areas like the Thar Desert in Rajasthan is to know whether the shallow groundwater is being actively recharged. Environmental isotopes particularly tritium are very useful in providing evidence of recent recharge. In the Barmer area, the shallow groundwaters have tritium levels generally in the range 3-6 TU showing modern recharge. Most of the recharge possibly occurs by direct infiltration of precipitation. Indirect recharge through wadis (river channels) could sometimes be an important mechanism of groundwater recharge. Environmental isotope study in Jalore area showed that the shallow groundwaters near the Sukri river course had δ 2 H and δ 18 O are depleted compared to present day precipitation but not as depleted as the present day Himalayan rivers. Carbon-24 values of some of these groundwaters are in the range of 54-58 pMC showing that they possibly represent old river with headwater connection outside the desert. In the Thar, the deep groundwaters which sometimes form the bulk of water supply are generally paleowaters as sown by environmental δ 2 H, δ 18 O, 3 H and 14 C. For example in the Barmer area, deep groundwaters (depth > 150m) have depleted δ 2 H and δ 18 O compared to the shallow groundwaters and present day precipitation. They have negligible 3 H and 14 C model ages ranging from 4000 to 9500 BP. Hence the isotope data of the deep groundwaters indicate they are paleowaters recharged during humid periods in the Holocene. Over-exploitation of deep groundwaters could lead to mixing of shallow and deep groundwaters or influx of waters from adjoining aquifers. In the Bikaner area similar δ 2 H and δ 18 O of the shallow and deep wells and young waters encountered in some of the deep wells indicated mixing between the two aquifers due to heavy exploitation of groundwaters in the area. In a limestone belt of Jodhpur-Nagaur district heavy exploitation of groundwaters is taking place in the southern

Determination of zinc nutrient in the soil using isotope technique

International Nuclear Information System (INIS)

Suwadji, E.

1975-01-01

In this experiment the availability of soil Zn nutrient in various soil conditions (dry and submerged), and the efficiency of the application of Zn fertilizer in rice nutrition were measured in glasshouse using isotope dilution technique. The amount of soil Zn nutrient available to plants can be expressed in 'E' and 'L' values. Submerged conditions generally showed an increase in the 'E' and 'L' value compared to dry conditions. Mixed treatment with ZnSO 4 fertilizer is more efficient for Zn absorption than surface treatment. (author)

Environmental isotopes and hydrochemical study of groundwater in the north eastern portions of the delta of wadi El-Arish, Sinai, Egypt

International Nuclear Information System (INIS)

Nada, A.; Aly, A.I.M.; Awad, M.; El-Behery, M.A.; Hamza, M.S.

1991-01-01

An environmental isotopes and hydrochemical study was conducted on the underground water bearing strata in the northern part of Wadi El-Arish area, sinai. Wadi El-Arish area represents one of the most important areas for future agricultural expansion in the sinai peninsula. The purpose of the study is to determine whether the groundwater is recently recharged or not in order to adopt an efficient management policy. The hydrochemical results indicate the meteoric origin of the water with some contribution from sea water and old marine water. The tritium data confirm the meteoric origin of the water and indicate the recharge of groundwater in the study area in the last 20 years. The stable environmental isotopic composition of the groundwater (oxygen-18 and deuterium) reflects more or less the isotopic composition of precipitation and flooding within the delta of the wadi to infiltration. There is also a possibility, of contribution from palea-water (depleted in the environmental stable isotopes) in some wells by leaking through faulting in this area.7 fig,2 tab

POSSIBILITY OF USING CARBON ISOTOPES IN THE ASSESSMENT OF THE POLLUTION OF GAS PHASE IN ENVIRONMENTAL RESEARCH

Directory of Open Access Journals (Sweden)

Dorota Porowska

2015-10-01

Full Text Available Carbon isotope analyses can be used for knowledge and practical purpose. They can be used to assess the genesis of carbon in geochemical environment, and may also be used to indicate environmental contamination by carbon-containing compounds. The aim of the paper is to indicate the possibilities of using carbon isotope composition for interpretation concerning the following elements of the natural environment: atmospheric air, subsurface zone (gases in soils and aeration zone in terms of natural and anthropogenic factors influencing on their quality. This method can be applied universally, when carbon sources are different in isotopic composition.

Introduction to Body Composition Assessment Using the Deuterium Dilution Technique with Analysis of Urine Samples by Isotope Ratio Mass Spectrometry (French Edition)

International Nuclear Information System (INIS)

2013-01-01

The IAEA has fostered the more widespread use of a stable isotope technique to assess body composition in different population groups to address priority areas in public health nutrition in Member States. It has done this by supporting national and regional nutrition projects through its technical cooperation programme and coordinated research projects over many years. This publication was developed by an international group of experts to provide practical hands-on guidance in the use of this technique in settings where analysis of stable isotope ratios in biological samples is to be made by isotope ratio mass spectrometry. The publication is targeted at new users of this technique, for example nutritionists, analytical chemists and other professionals. More detailed information on the theoretical background and the practical applications of state of the art methodologies to monitor changes in body composition can be found in IAEA Human Health Series No. 3, Assessment of Body Composition and Total Energy Expenditure in Humans by Stable Isotope Techniques

Introduction to Body Composition Assessment Using the Deuterium Dilution Technique with Analysis of Urine Samples by Isotope Ratio Mass Spectrometry (Spanish Edition)

International Nuclear Information System (INIS)

2013-01-01

The IAEA has fostered the more widespread use of a stable isotope technique to assess body composition in different population groups to address priority areas in public health nutrition in Member States. It has done this by supporting national and regional nutrition projects through its technical cooperation programme and coordinated research projects over many years. This publication was developed by an international group of experts to provide practical hands-on guidance in the use of this technique in settings where analysis of stable isotope ratios in biological samples is to be made by isotope ratio mass spectrometry. The publication is targeted at new users of this technique, for example nutritionists, analytical chemists and other professionals. More detailed information on the theoretical background and the practical applications of state of the art methodologies to monitor changes in body composition can be found in IAEA Human Health Series No. 3, Assessment of Body Composition and Total Energy Expenditure in Humans by Stable Isotope Techniques

Application of the mass spectrometry-isotope dilution technique for the determination of uranium contents in rocks

International Nuclear Information System (INIS)

Kakazu, M.H.; Iyer, S.S.

1980-01-01

Application of the spectrometric isotope dilution technique for the accurate determination of parts per million range of uranium in rock samples is described. The various aspects of the method like sample dissolution, ion exchange separation, mass spectrometric procedures are discussed. A single filament ionization source was employed for the isotope analysis. A carbon reduction method was used to reduce uranium oxide ions to uranium metal ions. The tracer solution for isotope dilution was prepared from National Bureau of Standards uranium isotopic Standard NBS U-970. Uranium contents are meassured for nine rock samples and the values obtained are compared with the uranium values measured by others workers. Errors caused in the uranium determination due to sample splitting problems as well as the incomplete acid digestion of the samples are discussed. (Author) [pt

Uranium isotope ratio measurements in field settings

International Nuclear Information System (INIS)

Shaw, R.W.; Barshick, C.M.; Young, J.P.; Ramsey, J.M.

1997-01-01

The authors have developed a technique for uranium isotope ratio measurements of powder samples in field settings. Such a method will be invaluable for environmental studies, radioactive waste operations, and decommissioning and decontamination operations. Immediate field data can help guide an ongoing sampling campaign. The measurement encompasses glow discharge sputtering from pressed sample hollow cathodes, high resolution laser spectroscopy using conveniently tunable diode lasers, and optogalvanic detection. At 10% 235 U enrichment and above, the measurement precision for 235 U/( 235 U+ 238 U) isotope ratios was ±3%; it declined to ±15% for 0.3% (i.e., depleted) samples. A prototype instrument was constructed and is described

Minor isotope safeguards techniques (MIST): Analysis and visualization of gas centrifuge enrichment plant process data using the MSTAR model

Science.gov (United States)

Shephard, Adam M.; Thomas, Benjamin R.; Coble, Jamie B.; Wood, Houston G.

2018-05-01

This paper presents a development related to the use of minor isotope safeguards techniques (MIST) and the MSTAR cascade model as it relates to the application of international nuclear safeguards at gas centrifuge enrichment plants (GCEPs). The product of this paper is a derivation of the universal and dimensionless MSTAR cascade model. The new model can be used to calculate the minor uranium isotope concentrations in GCEP product and tails streams or to analyze, visualize, and interpret GCEP process data as part of MIST. Applications of the new model include the detection of undeclared feed and withdrawal streams at GCEPs when used in conjunction with UF6 sampling and/or other isotopic measurement techniques.

Trace contaminants of agriculture, fisheries and food with particular reference to isotope studies

International Nuclear Information System (INIS)

Winteringham, F.P.W.

1977-01-01

Growing world population, industrilization and intensification of agricultural and fisheries practices have greatly increased the need during recent decades to protect the resources concerned, and the quality of food and agricultural environment. These trends have also resulted in a growing range of trace contaminants and excessive nutrient problems of agriculture and fisheries. Isotopic tracer and nuclear analytical techniques are powerful and often unique tools for the study and control of the problems, especially in relation to trace elements, nutrients and contaminants. In addition to the conventional use of radioactive and stable isotopes as tracers there appears to be considerable scope for the use of environmental or natural isotope ratio techniques and the use of labelled reagents and substrates as monitoring tools. Representative applications are described. (author)

Application of Zn isotopes in environmental impact assessment of Zn–Pb metallurgical industries: A mini review

International Nuclear Information System (INIS)

Yin, Nang-Htay; Sivry, Yann; Benedetti, Marc F.; Lens, Piet N.L.; Hullebusch, Eric D. van

2016-01-01

Zn and Pb smelters are the major contributors to Zn and Pb emissions among all anthropogenic sources, thus, it is essential to understand Zn isotopic variations within the context of metallurgical industries, as well as its fractionation in different environments impacted by smelting activities. This mini review outlines the current state of knowledge on Zn isotopic fractionation during the high-temperature roasting process in Zn and Pb refineries; δ"6"6Zn values variations in air emissions, slags and effluents from the smelters in comparison to the geogenic Zn isotopic signature of ores formation and weathering. In order to assess the environmental impact of these smelters, the available and measured δ"6"6Zn values are compiled for smelter impacted natural water bodies (groundwater, stream and river water), sediments (lake and reservoir) and soils (peat bog soil, inland soil). Finally, the discussion is extended to the fractionation induced during numerous physicochemical reactions and transformations, i.e. adsorption, precipitation as well as both inorganic and organic surface complexation. - Highlights: • Zn and Pb smelters are the major contributors to Zn emissions among all anthropogenic sources. • Zn isotopic variations in this context has been widely studied over the last 15 years. • Zn isotopic fractionation during the high-temperature roasting process and electroplating process is summarize. • Subsequent δ"6"6Zn values variations in air emissions, slags and effluents from the smelters are compared to the geogenic one. • The usefulness of δ"6"6Zn values to trace environmental impact of these smelters is discussed.

Appraisal of groundwater resources of Ziarat valley using isotopic techniques

International Nuclear Information System (INIS)

Ahmad, M.; Akram, W.; Tasneem, M.A.; Rafique, M.

2009-07-01

Study of water resources of Ziarat Valley was carried out to investigate groundwater recharge mechanism and effectiveness of delay action dams. Samples of precipitation (rain, snow), dam reservoirs and groundwater (dug wells, tube wells, karezes, springs) were periodically collected from different locations and analyzed for environmental isotopes (/sup 2/H, /sup 3/H, /sup 18/O, /sup 34/S). The data indicate that rainfall and snow samples show wide ranges of delta /sup 2/H and delta /sup 18/O. However, the mean values for these isotopes are -6.4% and -37% respectively. Mean tritium value of rain is 9TU. Delta /sup 2/H and delta /sup 18/O values of dam reservoirs range from -6.7 to +4.9% and -42 to +30% respectively. Average isotopic indices of all the karezes are close to each other. Mean delta /sup 18/O and delta /sup 2/H values of Sandaman Tangi, Faran Tangi and Quaid springs vary from -6.3 to -6% and -40 to -31%. Tritium concentration of Sandaman Tangi and Faran Tangi springs (7 TU) is less than Quaid spring (11TU). Ranges of mean delta /sup 18/O and delta /sup 2/H values of all the groundwater samples (wells, karezes, springs) are -6.6 to -2.2% and -40 to -16% respectively. Delta /sup 34/S values of dissolved sulphates in groundwater vary from -8.5 to -0.8%. In /sup 18/O vs. /sup 2/H plot, most of the groundwater samples lie close to LMWL indicating the meteoric origin. Reservoir water in Pechi Dam shows highly enriched isotopic values in summer due to evaporation. Such enriched values are not depicted by the groundwater in the wells and karezes downstream of the dam. This implies that there is no significant recharge from this dam. Similar is the case of Mana Dam. Vouch Ghouski Dam has some contribution towards groundwater recharge while Warchoom Dam is much effective and makes significant contribution. Results of tritium dating suggest that residence time of groundwater is quite short (only few years). (author)

Models for the runoff from a glacierized catchment area using measurements of environmental isotope contents

International Nuclear Information System (INIS)

Behrens, H.; Moser, H.; Oerter, H.; Rauert, W.; Stichler, W.; Ambach, W.; Kirchlechner, P.

1978-01-01

In the glacierized catchment area of the Rofenache (Oetztal Alps, Austria) during several years measurements have been made of the environmental isotopes 2 H, 18 O and 3 H in the precipitation, in snow and ice samples and in the runoff. Furthermore the electrolytic conductivity of runoff samples was measured and tracing experiments were made with fluorescent dyes. From core samples drilled in the accumulation area of the Vernagtferner, the gross beta activity was investigated and compared with both, the data from 2 H, 3 H und 18 O analyses and the data from mass balance studies. It is shown that the annual net balance from previous years can be recovered on temperate glaciers using environmental isotope techniques. From the diurnal variations of the 2 H and 3 H contents and the electrolytic conductivity the following proportions in the runoff of the Vernagtferner catchment area were obtained during a 24-hour interval at a time of strong ablation (August 1976): about 50% of ice melt water, 25% of direct runoff fo firn- and snow melt water, and 7% of mineralized groundwater. The rest of the runoff consists of not mineralized melt water seeping from the glacier body. The annual variations of the 2 H and 3 H contents in the runoff of the glacierized catchment area permit conclusions on the time sequence of the individual ablation periods and on the residence time on the basis of model concepts. The residence times of approximately 100 days or 4 years, respectively, are obtained from the decrease in the 2 H content at the end of the ablation period and from the variation of the 3 H content in the winter discharge. (orig.) [de

Traceability technique of isotopic application in food safety

International Nuclear Information System (INIS)

Guo Boli; Wei Yimin; Pan Jiarong

2006-01-01

Epidemics such as BSE, mouth and foot disease, avian influenza have brought new pressure to food safety management, constituted a extreme threat to people health, and caused serious economic loss and social scare to countries with outbreaks of above diseases. Isotopic tracing technology is an effect tool for tracing food origin and implementing the preservation of production premise in the world at present, and it is promising in the field of food safety traceability, so some developed countries have put a lot of effort on establishment of isotopic technology for food traceability. In this paper, the basic principles of isotopic tracing technology and the recent research advancement were be expounded, and the differentiate and connection was be compared between isotopic tracing technology and others. Furthermore, the suggestion about study of isotopic tracing technology in China was put forward. The aim of the paper is to promote the establishment and improvement of food traceability system, and ensure the consumer health. (authors)

Isotopes in heterogeneous catalysis

CERN Document Server

Hargreaves, Justin SJ

2006-01-01

The purpose of this book is to review the current, state-of-the-art application of isotopic methods to the field of heterogeneous catalysis. Isotopic studies are arguably the ultimate technique in in situ methods for heterogeneous catalysis. In this review volume, chapters have been contributed by experts in the field and the coverage includes both the application of specific isotopes - Deuterium, Tritium, Carbon-14, Sulfur-35 and Oxygen-18 - as well as isotopic techniques - determination of surface mobility, steady state transient isotope kinetic analysis, and positron emission profiling.

Are Polyatomic Interferences, Cross Contamination, Mixing-Effect, etc., Obstacles for the Use of Laser Ablation-ICP-MS Coupling as an Operational Technique for Uranium Isotope Ratio Particle Analysis?

International Nuclear Information System (INIS)

Donard, A.; Pointurier, F.; Pecheyran, C.

2015-01-01

Analysis of ''environmental samples'', which consists in dust collected with cotton clothes wiped by inspectors on surfaces inside declared nuclear facilities, is a key tool for safeguards. Although two methods (fission tracks-TIMS and SIMS) are already used routinely to determine the isotopic composition of uranium particles, the laser ablationinductively coupled plasma mass spectrometry (LA-ICP-MS) coupling has been proven to be an interesting option thanks to its rapidity, high sensitivity and high signal/noise ratio. At CEA and UPPA, feasibility of particle analysis using a nanosecond LA device and a quadrupole ICP-MS has been demonstrated. However, despite the obvious potential of LA-ICP-MS for particle analysis, the effect of many phenomena which may bias isotope ratio measurements or lead to false detections must be investigated. Actually, environmental samples contain many types of non-uranium particles (organic debris, iron oxides, etc.) that can form molecular interferences and induce the risk of isotopic measurement bias, especially for minor isotopes (234U, 236U). The influence of these polyatomic interferences on the measurements will be discussed. Moreover, different uranium isotopic compositions can be found in the same sample. Therefore, risks of memory effect and of particle-toparticle cross-contamination by the deposition of ablation debris around the crater have also been investigated. This study has been conducted by using a femtosecond laser ablation device coupled to a high sensitivity sector field ICP-MS. Particles were fixed onto the discs with collodion and were located thanks to their fission tracks so that micrometric particles can be analyzed separately. All uranium isotope ratios were measured. Results are compared with the ones obtained with the fission tracks-TIMS technique on other deposition discs from the same sample. Performance of the method in terms of accuracy, precision, and detection limits are estimated

Climate and vegetation study using environmental isotope types of stalactite at Seropan Cave, Gunung Kidul Yogyakarta

International Nuclear Information System (INIS)

Satrio; Sidauruk, P.; Pratikno, B.

2012-01-01

Climate and vegetation study using environmental isotopes (i.e., 13 C, 14 C and 18 O) variations of stalactite has been conducted at Seropan cave, Gunung Kidul Karst area. The stalactite samples were collected from Seropan Cave at Semanu, Gunung Kidul, Yogyakarta. The objective of study is to understand the climate change, and vegetation types, temperature of atmosphere, age and stalactite growth rate through the interpretation of environmental isotopes (i.e., 13 C, 14 C and 18 O) of stalactite samples. The environmental isotope content of stalactite samples were analysed through CaCO 3 compound that was found at the stalactite samples. The 13 C content of samples is important to understand climate undulation and also vegetation variation. On the other hand, the variation of 18 O and 14 C contents is important to predict past temperature of atmosphere, and the age as well as stalactite growth rate, respectively. The result of environmental 13 C isotope analysis showed that Gunung Kidul area in general can be classified as dry climate. It is also indicated that almost 87.5 % of local vegetation can be classified as dry vegetation C4 as can be seen from the variation of δ 13 C content that is -6 ‰ to +2 ‰ vs PDB. This can also mean that only 12.5 % of the time that the vegetation in the area is wet in which the variation of δ 13 C content is in the range -14 ‰ to -6 ‰ vs PDB. The variations of 18 O contents of the samples (carbonate stalactite, or drip water) showed that the average temperature since 1621 to 2011 was around 19.5 °C. On the other hand, the variations of 14 C contents of the samples showed that stalactite growth rate was around 0.1 mm/year or one mm in ten years. The result shows that the stalactite growth is very slow as generally expected in tropical area such as Gunung Kidul. (author)

Three New Offset {delta}{sup 11}B Isotope Reference Materials for Environmental Boron Isotope Studies

Energy Technology Data Exchange (ETDEWEB)

Rosner, M. [BAM Federal Institute for Materials Research and Testing, Berlin (Germany); IsoAnalysis UG, Berlin (Germany); Vogl, J. [BAM Federal Institute for Materials Research and Testing, Berlin (Germany)

2013-07-15

The isotopic composition of boron is a well established tool in various areas of science and industry. Boron isotope compositions are typically reported as {delta}{sup 11}B values which indicate the isotopic difference of a sample relative to the isotope reference material NIST SRM 951. A significant drawback of all of the available boron isotope reference materials is that none of them covers a natural boron isotope composition apart from NIST SRM 951. To fill this gap of required {delta}{sup 11}B reference materials three new solution boric acid reference materials were produced, which cover 60 per mille of the natural boron isotope variation (-20 to 40 per mille {delta}{sup 11}B) of about 100 per mille . The new reference materials are certified for their {delta}{sup 11}B values and are commercially available through European Reference Materials (http://www.erm-crm.org). The newly produced and certified boron isotope reference materials will allow straightforward method validation and quality control of boron isotope data. (author)

Authentication and traceability of Italian extra-virgin olive oils by means of stable isotopes techniques.

Science.gov (United States)

Portarena, S; Gavrichkova, O; Lauteri, M; Brugnoli, E

2014-12-01

Authentication of food origin is relevant to avoid food fraud. This work aimed to explore the variation of isotopic compositions (δ(13)C, δ(18)O) of extra-virgin olive oils from Italy growing in different environmental conditions. A total of 387 oil samples from nine different regions (from North to South), produced on 2009, 2010 and 2011, were analysed. Statistical analysis showed correlations among oil isotope compositions and latitude, mean annual temperature, mean annual precipitation and xerothermic index. No correlation was found comparing isotope compositions with elevation and longitude. An observed shift of the oil δ(18)O per centigrade degree of the mean annual temperature is congruent with literature. The year effect was significant for both δ(18)O and δ(13)C. Samples from Sicilia and Sardegna were higher in (13)C and (18)O than oils from northern regions. Copyright © 2014 Elsevier Ltd. All rights reserved.

Undercovering the hidden links. Nuclear and isotope techniques target nutritional needs

International Nuclear Information System (INIS)

Iyengar, Venkatesh

2001-01-01

Global nutrition problems raise a host of questions and warrant action by the international community of scientists, nutritionists, physicians and other medical professionals. What steps should be taken to remedy this situation? How can this be accomplished economically? How can progress be monitored? What is the role of technology in the overall monitoring process? The last question, which is most relevant to this article, is of particular importance to the IAEA and its support of nutrition programmes. The IAEA's activities in human nutrition were initiated to apply nuclear and related isotopic techniques for solving problems prevalent in developing countries. Among the numerous applications available, isotopic techniques are uniquely well suited to targeting and tracking progress in food and nutrition development programmes. These are tools that help evaluate nutritional status of individuals and populations, measure nutrient requirements and the uptake and bio-availability of vitamins and minerals. The IAEA's efforts help to: verify the nature of the nutrition problem and the efficacy of specific interventions; implement nutrition intervention programmes by monitoring effectiveness and reducing programme costs; guide in the processing of local foods for optimal nutritional value; serve as early indicators of important long-term health improvements; and strengthen capacity building in developing countries. Among the numerous applications available, isotopic techniques are uniquely well suited to targeting and tracking progress in food and nutrition development programmes. These are tools that help evaluate nutritional status of individuals and populations, measure nutrient requirements and the uptake and bio-availability of vitamins and minerals. The IAEA's efforts help to: verify the nature of the nutrition problem and the efficacy of specific interventions; implement nutrition intervention programmes by monitoring effectiveness and reducing programme costs

Precise determination of Pb isotope ratios by simple double spike MC-ICP-MS technique without Tl addition

Digital Repository Service at National Institute of Oceanography (India)

Makishima, A.; Nath, B.N.; Nakamura, E.

A double-spike multicollector ICP-MS (DS-MC-ICP-MS) technique for Pb isotope analysis without Tl addition is established and its analytical performance is examined in detail. This simple DS-MC-ICP-MS technique using 20 ng ml sup(-1) gave averages...

Recent research activities and future subjects on stable- and radio-isotopes of chlorine in environment

International Nuclear Information System (INIS)

Kushita, Kouhei

2001-12-01

This report reviews the recent studies on the stable- and radio-isotopes of chlorine from a viewpoint of environmental science, partly including historic references on this element. First, general properties, occurrence, and utilization of chlorine are described. Secondly, current status and research works on chlorine-compounds, which attract special attention in recent years as environmentally hazardous materials, are reported. Thirdly, research works on stable chlorine isotopes, 35 Cl and 37 Cl, are described with a focus laid on the newly-developed techniques; isotopic ratio mass spectrometry (IRMS) and thermal ionization mass spectrometry (TIMS). Fourthly, recent research works on chlorine radioisotopes, 36 Cl etc., are described, focusing on the development of accelerator mass spectrometry (AMS) and its application to geochemistry and others. Finally, taking account of the above-mentioned recent works on Cl isotopes, possible future research subjects are discussed. (author)

Recent research activities and future subjects on stable- and radio-isotopes of chlorine in environment

Energy Technology Data Exchange (ETDEWEB)

Kushita, Kouhei [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2001-12-01

This report reviews the recent studies on the stable- and radio-isotopes of chlorine from a viewpoint of environmental science, partly including historic references on this element. First, general properties, occurrence, and utilization of chlorine are described. Secondly, current status and research works on chlorine-compounds, which attract special attention in recent years as environmentally hazardous materials, are reported. Thirdly, research works on stable chlorine isotopes, {sup 35}Cl and {sup 37}Cl, are described with a focus laid on the newly-developed techniques; isotopic ratio mass spectrometry (IRMS) and thermal ionization mass spectrometry (TIMS). Fourthly, recent research works on chlorine radioisotopes, {sup 36}Cl etc., are described, focusing on the development of accelerator mass spectrometry (AMS) and its application to geochemistry and others. Finally, taking account of the above-mentioned recent works on Cl isotopes, possible future research subjects are discussed. (author)

DNA stable-isotope probing (DNA-SIP).

Science.gov (United States)

Dunford, Eric A; Neufeld, Josh D

2010-08-02

DNA stable-isotope probing (DNA-SIP) is a powerful technique for identifying active microorganisms that assimilate particular carbon substrates and nutrients into cellular biomass. As such, this cultivation-independent technique has been an important methodology for assigning metabolic function to the diverse communities inhabiting a wide range of terrestrial and aquatic environments. Following the incubation of an environmental sample with stable-isotope labelled compounds, extracted nucleic acid is subjected to density gradient ultracentrifugation and subsequent gradient fractionation to separate nucleic acids of differing densities. Purification of DNA from cesium chloride retrieves labelled and unlabelled DNA for subsequent molecular characterization (e.g. fingerprinting, microarrays, clone libraries, metagenomics). This JoVE video protocol provides visual step-by-step explanations of the protocol for density gradient ultracentrifugation, gradient fractionation and recovery of labelled DNA. The protocol also includes sample SIP data and highlights important tips and cautions that must be considered to ensure a successful DNA-SIP analysis.

Applications of DNA-Stable Isotope Probing in Bioremediation Studies

Science.gov (United States)

Chen, Yin; Vohra, Jyotsna; Murrell, J. Colin

DNA-stable isotope probing, a method to identify active microorganisms without the prerequisite of cultivation, has been widely applied in the study of microorganisms involved in the degradation of environmental pollutants. Recent advances and technique considerations in applying DNA-SIP in bioremediation are highlighted. A detailed protocol of a DNA-SIP experiment is provided.

Measurement of isotope abundance variations in nature by gravimetric spiking isotope dilution analysis (GS-IDA).

Science.gov (United States)

Chew, Gina; Walczyk, Thomas

2013-04-02

Subtle variations in the isotopic composition of elements carry unique information about physical and chemical processes in nature and are now exploited widely in diverse areas of research. Reliable measurement of natural isotope abundance variations is among the biggest challenges in inorganic mass spectrometry as they are highly sensitive to methodological bias. For decades, double spiking of the sample with a mix of two stable isotopes has been considered the reference technique for measuring such variations both by multicollector-inductively coupled plasma mass spectrometry (MC-ICPMS) and multicollector-thermal ionization mass spectrometry (MC-TIMS). However, this technique can only be applied to elements having at least four stable isotopes. Here we present a novel approach that requires measurement of three isotope signals only and which is more robust than the conventional double spiking technique. This became possible by gravimetric mixing of the sample with an isotopic spike in different proportions and by applying principles of isotope dilution for data analysis (GS-IDA). The potential and principle use of the technique is demonstrated for Mg in human urine using MC-TIMS for isotopic analysis. Mg is an element inaccessible to double spiking methods as it consists of three stable isotopes only and shows great potential for metabolically induced isotope effects waiting to be explored.

Stable isotopes

International Nuclear Information System (INIS)

Evans, D.K.

1986-01-01

Seventy-five percent of the world's stable isotope supply comes from one producer, Oak Ridge Nuclear Laboratory (ORNL) in the US. Canadian concern is that foreign needs will be met only after domestic needs, thus creating a shortage of stable isotopes in Canada. This article describes the present situation in Canada (availability and cost) of stable isotopes, the isotope enrichment techniques, and related research programs at Chalk River Nuclear Laboratories (CRNL)

Application of nuclear techniques on environmental pollution problems

International Nuclear Information System (INIS)

Sumatra, Made

1998-01-01

Radioanalysis and tracer techniques that can be used on environmental pollution problems. Neutron activation analysis (NAA) and X-ray fluorescence (XRF) spectrometry are the two methods that are used frequently on such problems. These methods are used for metal analysis. Tracer technique with radioactive labeled compounds are used to study the fate of the pollution substances in environmental systems. It is very important to validate every new developed analysis method, due to the environmental pollution problem closely related to the low enforcement. (author)

International symposium on isotope hydrology and integrated water resources management. Book of extended synopses

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

Scarcity of freshwater, degradation of its quality, and increasing demand has motivated ongoing concern in the international community for more effective utilization of freshwater resources. The IAEA's symposia on the use of isotope techniques in water resources development and management have become a recurrent event held every four years. They have provided an international forum for a comprehensive review of the present state-of-the-art and recent advances made in this specific field as well as a basis for delineation of further research and development needs. The year 2003 marks the 40th anniversary of the first IAEA water resources symposium. Increasing use of isotope techniques over the past four decades, in part due to efforts of IAEA, has enhanced availability and effective use of isotopes to address water resources management issues. The Symposium covers a multi-disciplinary spectrum of research and applications of isotope techniques. The participation of isotope specialists, hydrologists, hydrogeologists, geochemists, environmental scientists and water managers is welcomed. The Organizers further encourage the participation and contribution of graduate students in these fields. The major areas covered include: Water cycle processes in the atmosphere and hydrosphere, including surface water, groundwater, and watershed-based studies, age dating of young groundwaters, water, carbon and nutrient cycling processes at the land-ocean-atmosphere interface, recent advances in analytical techniques for isotope hydrology and field applications of isotopes in groundwater or surface water resources management. This book of synopses covers oral presentations and poster sessions.

On-line hydrogen-isotope measurements of organic samples using elemental chromium: An extension for high temperature elemental-analyzer techniques

Science.gov (United States)

Gehre, Matthias; Renpenning, Julian; Gilevska, Tetyana; Qi, Haiping; Coplen, Tyler B.; Meijer, Harro A.J.; Brand, Willi A.; Schimmelmann, Arndt

2015-01-01

The high temperature conversion (HTC) technique using an elemental analyzer with a glassy carbon tube and filling (temperature conversion/elemental analysis, TC/EA) is a widely used method for hydrogen isotopic analysis of water and many solid and liquid organic samples with analysis by isotope-ratio mass spectrometry (IRMS). However, the TC/EA IRMS method may produce inaccurate δ2H results, with values deviating by more than 20 mUr (milliurey = 0.001 = 1‰) from the true value for some materials. We show that a single-oven, chromium-filled elemental analyzer coupled to an IRMS substantially improves the measurement quality and reliability for hydrogen isotopic compositions of organic substances (Cr-EA method). Hot chromium maximizes the yield of molecular hydrogen in a helium carrier gas by irreversibly and quantitatively scavenging all reactive elements except hydrogen. In contrast, under TC/EA conditions, heteroelements like nitrogen or chlorine (and other halogens) can form hydrogen cyanide (HCN) or hydrogen chloride (HCl) and this can cause isotopic fractionation. The Cr-EA technique thus expands the analytical possibilities for on-line hydrogen-isotope measurements of organic samples significantly. This method yielded reproducibility values (1-sigma) for δ2H measurements on water and caffeine samples of better than 1.0 and 0.5 mUr, respectively. To overcome handling problems with water as the principal calibration anchor for hydrogen isotopic measurements, we have employed an effective and simple strategy using reference waters or other liquids sealed in silver-tube segments. These crimped silver tubes can be employed in both the Cr-EA and TC/EA techniques. They simplify considerably the normalization of hydrogen-isotope measurement data to the VSMOW-SLAP (Vienna Standard Mean Ocean Water-Standard Light Antarctic Precipitation) scale, and their use improves accuracy of the data by eliminating evaporative loss and associated isotopic fractionation while

On-line hydrogen-isotope measurements of organic samples using elemental chromium: an extension for high temperature elemental-analyzer techniques.

Science.gov (United States)

Gehre, Matthias; Renpenning, Julian; Gilevska, Tetyana; Qi, Haiping; Coplen, Tyler B; Meijer, Harro A J; Brand, Willi A; Schimmelmann, Arndt

2015-01-01

The high temperature conversion (HTC) technique using an elemental analyzer with a glassy carbon tube and filling (temperature conversion/elemental analysis, TC/EA) is a widely used method for hydrogen isotopic analysis of water and many solid and liquid organic samples with analysis by isotope-ratio mass spectrometry (IRMS). However, the TC/EA IRMS method may produce inaccurate δ(2)H results, with values deviating by more than 20 mUr (milliurey = 0.001 = 1‰) from the true value for some materials. We show that a single-oven, chromium-filled elemental analyzer coupled to an IRMS substantially improves the measurement quality and reliability for hydrogen isotopic compositions of organic substances (Cr-EA method). Hot chromium maximizes the yield of molecular hydrogen in a helium carrier gas by irreversibly and quantitatively scavenging all reactive elements except hydrogen. In contrast, under TC/EA conditions, heteroelements like nitrogen or chlorine (and other halogens) can form hydrogen cyanide (HCN) or hydrogen chloride (HCl) and this can cause isotopic fractionation. The Cr-EA technique thus expands the analytical possibilities for on-line hydrogen-isotope measurements of organic samples significantly. This method yielded reproducibility values (1-sigma) for δ(2)H measurements on water and caffeine samples of better than 1.0 and 0.5 mUr, respectively. To overcome handling problems with water as the principal calibration anchor for hydrogen isotopic measurements, we have employed an effective and simple strategy using reference waters or other liquids sealed in silver-tube segments. These crimped silver tubes can be employed in both the Cr-EA and TC/EA techniques. They simplify considerably the normalization of hydrogen-isotope measurement data to the VSMOW-SLAP (Vienna Standard Mean Ocean Water-Standard Light Antarctic Precipitation) scale, and their use improves accuracy of the data by eliminating evaporative loss and associated isotopic fractionation while

Manual for the Use of Stable Isotopes in Entomology

International Nuclear Information System (INIS)

2009-06-01

result of problem driven inquisitiveness and technological advances, and are framed by the social and political environment. Although the external environment may mould the technological path, a technology will only become obsolete if there are viable substitution products or methods. Stable isotope methods are a substitute for many radionuclide methods. The progress made in stable isotope science over the past twenty years is a direct result of the interplay of the above factors. Stable isotopes are omnipresent in the environment and pose no health or environmental risks. Advances in isotope ratio mass spectrometry in terms of detection, accuracy and automation have broadened experimental possibilities immensely over the past twenty years. It was recognised that there was significant potential for answering many of the entomologist?s biological and ecological questions using stable isotopes, an expertise the Soil Science Unit of the FAO/IAEA Agriculture and Biotechnology Laboratory in Seibersdorf had long fostered; therefore collaboration with the Entomology Unit at the same Laboratory was established. A number of collaborative experiments were carried and subsequently published. It was soon recognised that stable isotopes have tremendous potential in entomological research and although there were numerous studies using stable isotopes in ecology, their use in entomology per se was limited. Thus it was felt that a publication was required to make stable isotope techniques more widely known among entomologists. This manual will attempt to provide an introduction to the use of stable isotopes in entomological research. It will strive to communicate the basic principles and techniques of stable isotope science and provide a springboard for further interest and research in this area

Study of groundwater salinization in Chaj Doab using environmental isotopes

International Nuclear Information System (INIS)

Hussain, S.D.; Sajjid, M.I.; Akram, W.; Ahmad, M.; Rafiq, M.

1991-09-01

Environmental isotopes and chemical composition of water have been used to study the origin of groundwater salinity in Chaj Doab. Three important possible processes of salinization i.e. enrichment of salt content of water by evaopration, mixing with connate marine water and dissolution of salts from soil sediments have been investigated. No evidence for mixing with connate maine water could be found. The process of evaporation too does not seem to apply any significant role in salinization of groundwater. The dissolution of salts from soil sediments appears as dominant mechanism for increasing the salt content of water in this area. (author)

Applications of isotopes. [Need and cost of stable iotopes for use as tracers in biomedical and environmental studies

Energy Technology Data Exchange (ETDEWEB)

Kirby-Smith, J.S.

1976-01-01

Current and potential applications of stable isotopes as tracers in a number of biomedical and environmental areas are discussed. It is pointed out that a wide variety of problems exist in these fields whose solutions in principle are amenable to the isotopic approach. The number and diversity of these problems as well as the unique role stable isotopes can play in their solution illustrate the importance of achieving and maintaining a broad inventory of isotopic species. Experience has demonstrated unequivocally an additional overriding requirement for widespread exploration of stable isotopes by the scientific and technical community, i.e., the need for low cost availability of the materials in quantity. Some representative applications of /sup 12/C, /sup 13/C, /sup 14/N, /sup 15/N, /sup 16/O, /sup 17/O, and /sup 18/O are discussed.

Application of isotope techniques to groundwater pollution research for Xiangshan uranium ore field, China

International Nuclear Information System (INIS)

Liu Fulin; Liu Peilun; Zhu Chuande; Wu Xiaowei; Zeng Yinsheng

1998-01-01

The investigation of groundwater pollution due to uranium deposits focused on the most important uranium metallogenic area-Zhoujiashan district of Xiangshan uranium ore field, China. Groundwater collected from five completed exploration boreholes in the area is regarded as the pollution source and is traced and analysed by using isotope as well as radio-hydrochemical techniques. In addition, the pollution situation of a small uranium ore pile for heap-leaching and a big uranium ore open pit are monitored by the same techniques. It has been experimentally proven that the uranium concentration and the uranium isotope ratio 234 U/ 238 U in natural waters are two sensitive indicators of radioactive pollution in natural waters. It was concluded that under present conditions, exploration of uranium deposits may not cause serious groundwater pollution of radioactive elements (U, Ra, Rn and Th), however, it is difficult to avoid the serious surface water pollution coming from the exploitation of uranium ore by a big open pit. (author)

Enhanced forensic discrimination of pollutants by position-specific isotope analysis using isotope ratio monitoring by (13)C nuclear magnetic resonance spectrometry.

Science.gov (United States)

Julien, Maxime; Nun, Pierrick; Höhener, Patrick; Parinet, Julien; Robins, Richard J; Remaud, Gérald S

2016-01-15

In forensic environmental investigations the main issue concerns the inference of the original source of the pollutant for determining the liable party. Isotope measurements in geochemistry, combined with complimentary techniques for contaminant identification, have contributed significantly to source determination at polluted sites. In this work we have determined the intramolecular (13)C profiles of several molecules well-known as pollutants. By giving additional analytical parameters, position-specific isotope analysis performed by isotope ratio monitoring by (13)C nuclear magnetic resonance (irm-(13)C NMR) spectrometry gives new information to help in answering the major question: what is the origin of the detected contaminant? We have shown that isotope profiling of the core of a molecule reveals both the raw materials and the process used in its manufacture. It also can reveal processes occurring between the contamination site 'source' and the sampling site. Thus, irm-(13)C NMR is shown to be a very good complement to compound-specific isotope analysis currently performed by mass spectrometry for assessing polluted sites involving substantial spills of pollutant. Copyright © 2015 Elsevier B.V. All rights reserved.

Groundwater salinity study in the Mekong Delta using isotope techniques

International Nuclear Information System (INIS)

Le Van Khoi, Nguyen Kien Chinh; Do Tien Hung

2002-01-01

Environmental isotopes D, 18 O and chemical composition were used for study of recharge and salinization of groundwater in the are located between Bassac and Mekong Rivers. The results showed that: (a) Pleistocene aquifers are recharged through flood plains and outcrops located at the same altitude. The sanility of groundwater in these aquifers is mostly due to dissolution of the aquifer material, (b) Pliocene and Miocene aquifers receive recharge through outcrops located at the higher altitude on the northeast extension of the Delta and Cambodia. The salinity of groundwater in the coastal region of the aquifer is attributable to sea water intrusion. There appears to be significant retention of sea water in the coastal sediment during intrusion. (Author)

Study of groundwater recharge in Rechna Doab using isotope techniques

International Nuclear Information System (INIS)

Sajjad, M.I.; Tasneem, M.A.; Ahmed, M.; Hussain, S.D.; Khan, I.H.; Akram, W.

1992-04-01

Isotopic studies were performed in the Rechna Doab area to understand the recharge mechanism, investigate the relative contributions from various sources such as rainfall, rivers and canal system and to estimate the turn over times and replenishment rate of groundwater. The isotopic data suggest that the groundwater in the project area can be divided into different zones each having its own characteristic isotopic composition. The enriched isotopic values show rain recharge and depleted isotopic values are associated with river/canal system while the intermediate isotopic values show a mixing of two or more sources of water. The major contribution, however, comes from canal system. The isotopic data suggest that there is no quick movement of groundwater in the area. 18 figs. (author)

Environmental isotopes investigation in groundwater of Challaghatta ...

African Journals Online (AJOL)

Administrator

Radiogenic isotopes (3H and 14C) and stable isotope (18O) together with TDS, EC and salinity of water were used to ..... Tritium (3H). Relative dating of groundwater has been carried ... that falls to Earth has small amounts of tritium. During the.

Application of the stable-isotope system to the study of sources and fate of Hg in the environment: A review

International Nuclear Information System (INIS)

Yin Runsheng; Feng Xinbin; Shi Wenfang

2010-01-01

With the improvement of analytical methods and the development of multiple-collector inductively coupled plasma-mass spectrometry (MC-ICP/MS), research on non-traditional stable isotope (Cu, Zn, Fe, Se, Mo, Cr, Hg) in geochemistry has made tremendous progress in the past decade. Recent studies have demonstrated that both organic and inorganic reactions may cause Hg isotope fractionation, and variations of Hg isotopic composition in the environment have been successfully employed to explain Hg pollution history, Hg sources and tracking Hg pathways in nature. Furthermore, Hg isotopic fractionation studies can be a powerful tool in the calibration of global Hg cycling models. Stable isotope geochemistry of Hg is therefore becoming a new frontier subject in earth sciences. Based on summarizing previous research, this paper outlines the main advances in the study of Hg stable isotopes with particular emphasis placed on a brief explanation of Hg isotope analytical techniques, possible Hg isotope fractionation mechanisms observed in both natural and experimental processes, Hg isotope composition variations in different environmental matrices, and the application prospects of the Hg stable isotopes in environmental geosciences.

Experimental study on isotope fractionation of evaporating water of different initial isotopic composition

International Nuclear Information System (INIS)

Pooja Devi; Jain, A.K.; Rao, M.S.; Kumar, B.

2014-01-01

The studies of evaporative isotopic fractionation in controlled conditions are of particular importance for understanding the mechanism of evaporation fractionation in natural conditions. We present the measurements of the average isotopic fractionation factors during the evaporation of water having different initial isotopic compositions at constant temperature. The results show that the isotopic composition of residual water become more enriched over the time and the initial isotopic composition of evaporating water has considerable effect on the average isotopic fractionation factors. The average isotopic fractionation factors in evaporation of Water A and Water B under the present experimental conditions were found to be 0.9817 ± 0.0044 and 0.9887 ± 0.0031 for oxygen and 0.9178 ± 0.0182 and 0.9437 ± 0.0169 for hydrogen, respectively. The findings of this work should lead to a better understanding and use of stable isotope techniques in isotope hydrology by using a simple technique of evaporation pan. (author)

Use of nuclear techniques and hydrochemical analysis to evaluate the impact of tailings dams

Energy Technology Data Exchange (ETDEWEB)

Fernandes, Flaviane M.; Fleming, Peter M.; Fonseca, Flávio H. da R.; Pimenta, Rafael C.; Moreira, Rubens M., E-mail: flaviane@cdtn.br, E-mail: pmf@cdtn.br, E-mail: flavio.fonseca@cdtn.br, E-mail: colombopimenta@gmail.com, E-mail: rubens@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2017-11-01

The mining industry is a most important productive segment to country's economy. However, it is important to recognize and monitor the environmental impacts caused by mining, such as dams. They are structures built to store the waste produced by the beneficiation of ores, through chemical and mechanical processes classified as concentrate, crude ore or tailings. Tailings dams are associated with a potential risk of disruption and can therefore cause various images to the environment and population. Seepage flows and transport mechanisms are parameters to indicate the structural integrity. Nuclear technology can be used as a tool to trace these parameters. The objective of this work is to use isotopic techniques and hydrochemical characterization to detect leaks in dams belonging to a mining company. The isotopic techniques are used to measure the concentration of environmental isotopes in dam waters and their mediations, among which deuterium ({sup 2}H) and oxygen-18 ({sup 18}O) are measured. These isotopes will be used as environmental tracers to investigate the presence of infiltrations through the displacement of the water in its flow in the aquifer, since they are constituent of the molecule of water. In parallel, the basic physical chemical parameters and water quality parameters will be measured in-situ to aid in the interpretation of the results of the isotopic analyzes. Thus, it is intended to provide data that can help the environmental agencies to make decisions regarding the decommissioning of the mine. (author)

15N isotopic techniques to study nitrogen cycle in soil-plant-atmosphere system

International Nuclear Information System (INIS)

Kumar, Manoj; Chandrakala, J.U.; Sachdev, M.S.; Sachdev, P.

2009-01-01

Intensification of agriculture to meet the increasing food demand has caused severe disruption in natural balance of global as well as regional nitrogen cycle, potentially threatening the future sustainability of agriculture and environment of the total fertilizer nitrogen used in agriculture globally, only less than half is recovered by crop plants, rest is lost to the environment, resulting in several environmental problems such as ground water pollution and global warming, besides huge economic loss of this costly input in agriculture. Improving fertilizer nitrogen use efficiency and minimising N loss to the environment is the key to regain the lost control of nitrogen cycle in agriculture. Fertilizer nitrogen use efficiency depends largely on N requirement of crops, N supply from soil and fertilizer through N transformations in soil, and N losses from the soil-water-plant system. 15 N isotopic techniques have the potential to provide accurate measurement quantification of different processes involved in N cycle such as fixation of atmospheric N 2 , transformations- mineralization and immobilization- of soil and fertilizer N which governs N supply to plants, and N losses to the environment through ammonia volatilization, denitrification and nitrate leaching. 15 N tracers can also give precise identification of ways and sources of N loss from agriculture. These information can be used to develop strategies for increasing fertilizer N use efficiency and minimizing the loss of this costly input from agriculture to environment, which in turn will help to achieve the tripartite goal of food security, agricultural profitability and environmental quality. (author)

Environmental Isotope Study of the Well Field of the Sana'a Water Supply and Sanitation Local Corporation (SWSSLC) In Sana'a Basin-Yemen

International Nuclear Information System (INIS)

Shamsan, A. M.

2004-01-01

Environmental Isotope Study Of The Well Field of The Sana'a Water Supply and Sanitation Local Corporation (SWSSLC) In Sana'a Basin-Yemen. The water in the deep aquifers of the Sana'a Basin has been investigated using chemical and environmental isotope techniques. To identify the Chemical and the Isotopic characteristics for the well fields of the Sana'a Water Supply And Sanitation Local Corporation (SWSSLC) which withdrawal the water from deep aquifers (Tawilah Sandstone and Volcanics).The Tawilah Sandstone and Volcanic Aquifers represent the main Aquifers in the Sana'a Basin.The chemical and environmental isotope study in Sana'a basin comes out with the following results: 1. The Hydrochemical characteristic in the Sana'a Basin differ from aquifer to another, according to the rock type or formation, It was found that the type of water in the Tawilah sandstone is dominated by Ca- Na- HCO 3 , while the water type Na-Ca- HCO 3 found demonstrated in Volcanic Aquifer. Generally the Hydrochemical composition of groundwater from two aquifers are represent of mixture water. 2. The Groundwater of the deep aquifers for (Tawilah sandstone and Volcanics), indicates that its isotopic constitutes for a 18 O is depleted and tend to be close from the slope 8 of global meteoric water line, which means that this water does not exposed to any evaporation processes, and infiltrated to the aquifers in a cold and humid climatic condition. It is also indicates that the recharge to the deep aquifers comes from the same source and same altitudes, and also there is a hydraulic contact between aquifers. 3. The δ 18 O and δ 2 H values of the groundwater samples from deep aquifers are reflect hydrological regime with limited present day recharge and storage of large volume of fossil ground water .the very low or non-existent Tritium 3 H concentration observed in groundwater also support this conclusion and indicate that the groundwater contains no water recharged in the last four decades

Isotope techniques in catchment behaviour studies with particular emphasis on snowmelt runoff investigations

International Nuclear Information System (INIS)

Yurtsever, Y.

1984-05-01

The dynamics of runoff occurring mainly by snowmelt have been investigated by the aid of environmental isotopes. Regular samples collected from river water and snow cover throughout 1978 to 1981 at two selected catchment basins in eastern Turkey were analysed for their oxygen-18, deuterium and tritium contents. The tritium results together with detailed hydrological and hydro-meteorological data have enabled to study the time distribution of various component flow systems involved in the total runoff resulting from snowmelt

Isotopic techniques to study phosphorus cycling in soils

International Nuclear Information System (INIS)

Manjaiah, K.M.; Sreenivasa Chari, M.; Sachdev, P.; Sachdev, M.S.

2008-01-01

A sound understanding of phosphorus cycling in soil system is essential in order to manage this system in a sustainable manner. Phosphorus transformations are characterized by physico-chemical (sorption-desorption) and biological processes . The transformation rates need to be taken into account while developing nutrient management strategies for economical and sustainable production. One of the important tools and the method gaining popularity for determining the gross transformation rates of nutrients in the soil is the isotopic dilution technique. The major processes in the soil-plant system which determine the distribution and bioavailability of phosphorus in various inorganic and organic soil components consist of: (1) the dissolution of soil mineral phosphates, (2) retention of phosphorus by inorganic soil constituents, (3) decomposition of organic phosphorus contained in plant, animal and microbial detritus and (4) Immobilization of phosphorus via the soil microbial biomass and plan uptake

Evaluation of salt tolerance in wheat genotypes using growth and carbon isotopes discrimination technique

International Nuclear Information System (INIS)

Shirazi, M.U.; Khan, M.A.; Mujtaba, S.M.; Shereen, A.

2015-01-01

Studies were conducted in green house to select suitable salt tolerant wheat genotypes on the basis of growth performance and carbon isotopes discrimination (CID) technique. Nine newly developed double haploids (DH) wheat genotypes were tested under gravel culture, along with salt tolerant (LU-26s) and high yielding (Sarsabz) checks. The crop was irrigated by non-saline (control) and saline (12dS/m) water and raised up to maturity, growth parameters (i.e. plant height, plant biomass, productive tillers, spike length, number of spiklets/spike, number of grains / spike, grain weight/ spike and grain yield/ 15 plants) were recorded after harvesting. Plant samples (straw) were collected and were analyzed for carbon isotopic ratio (C12/ C13) from IAEA laboratories Vienna Austria. The data showed that there was significant decrease in all the growth parameters due to salinity. On the basis of performance in different growth parameters it was found that wheat genotypes V3-DH, V9-DH, V10-DH, V13-DH, and LU-26s had good response at 12dSm-1, thus can be categorized as better performing genotypes. Studies on carbon isotopes discrimination (CID) showed a decreasing trend under salinity. Mean CID values were 20.86 and 17.49 under two environments (non saline and saline, respectively), showing an overall 19% decrease under salinity. Generally the wheat genotypes having higher grain yield also had high carbon isotopes discrimination (CID). The relationship between grain yield and CID was positive (R2 = 0.695). The genotypes V10-DH, V13-DH with lower decrease in CID (i.e. 1.2 and 11.0%, respectively), also had high grain yield under salinity. Therefore the studies suggest that we can include CID technique as one of the selection criteria for salt tolerance. (author)

Application of Isotope Techniques in the Assessment of Groundwater Resource in Water Resources Region 10, Philippines

International Nuclear Information System (INIS)

Racadio, Charles Darwin T.; Mendoza, Norman DS.; Castañeda, Soledad S.; Abaño, Susan P.; Rongavilla, Luis S.; Castro, Joey

2015-01-01

Groundwater has been the primary source of drinking water of about 50% of the people in the Philippines and the numbers continue to rise. However, data and information on groundwater resources are generally spasmodic or sparse in the country. A specific remedy to address this gap is the use of isotope hydrological techniques. A pilot project utilizing this technique was done in Water Resources Region X with the aim of demonstrating the effectiveness and efficiency of these approach in groundwater resources assessment. When optimized, the technique will be replicated in other areas of the country. Groundwater samples from springs deep wells hand pumps and dug wells and river water were collected within the study area from September 2012 to June 2014. Monthly integrated precipitation samples were also collected at different points within the study area from October 2012 to March 2015. Samples were analyzed for stable isotope (δ”2H and δ”1”8O) using Laser Water Isotope Analyzer and tritium for groundwater dating. Results showed that aquifers in the study area are recharged by infiltrated rain during the heavy rainfall moths (May to November for Cagayan-Tagaloan Basin, and December to April for Agusan Basin). Water in Agusan Basin is isotopically enriched compared with the water in Cagayan-Tagaloan Basin. There appears to be interaction between shallow unconfined aquifer and deep semi-confined aquifer in Cagayan de Oro City. Shallow aquifers appear to be recharged by local precipitation. Groundwater in the study area is of Ca-Mg-HCO 3 type, which is characteristic of dynamic water with short residence time. Tritium-helium aging puts the water at ages between 18 to 72 years. Recharged rates of 422 to 625 mm/year were calculated for Cagayan de Oro City.(author)

Environmental isotope signatures of the largest freshwater lake in Kerala

International Nuclear Information System (INIS)

Unnikrishnan Warrier, C.

2007-01-01

Sasthamkotta lake, the largest freshwater lake in Kerala, serves as a source for drinking water for more than half a million people. Environmental 137 Cs analysis done on undisturbed sediment core samples reveals that the recent rate of sedimentation is not uniform in the lake. The useful life of lake is estimated as about 800 years. The δD and δ 18 O values of the lake waters indicate that the lake is well mixed with a slight variation horizontally. The stable isotope studies on well waters from the catchment indicate hydraulic communication with the lake and lake groundwater system is flow-through type. Analytical model also supports this view. (author)

Mediating multimodal environmental knowledge across animation techniques

DEFF Research Database (Denmark)

Maier, Carmen Daniela

2011-01-01

://www.sustainlane.com/. The multimodal discourse analysis is meant to reveal how selection and representation of environmental knowledge about social actors, social actions, resources, time and space are influenced by animation techniques. Furthermore, in the context of this multimodal discourse analysis, their influence upon......The growing awareness of and concern about present environmental problems generate a proliferation of new forms of environmental discourses that are mediated in various ways. This chapter explores issues related to the ways in which environmental knowledge is multimodally communicated...

Quantification of Labile Soil Mercury by Stable Isotope Dilution Techniques

Science.gov (United States)

Shetaya, Waleed; Huang, Jen-How; Osterwalder, Stefan; Alewell, Christine

2016-04-01

Mercury (Hg) is a toxic element that can cause severe health problems to humans. Mercury is emitted to the atmosphere from both natural and anthropogenic sources and can be transported over long distances before it is deposited to aquatic and terrestrial environments. Aside from accumulation in soil solid phases, Hg deposited in soils may migrate to surface- and ground-water or enter the food chain, depending on its lability. There are many operationally-defined extraction methods proposed to quantify soil labile metals. However, these methods are by definition prone to inaccuracies such as non-selectivity, underestimation or overestimation of the labile metal pool. The isotopic dilution technique (ID) is currently the most promising method for discrimination between labile and non-labile metal fractions in soil with a minimum disturbance to soil-solid phases. ID assesses the reactive metal pool in soil by defining the fraction of metal both in solid and solution phases that is isotopically-exchangeable known as the 'E-value'. The 'E-value' represents the metal fraction in a dynamic equilibrium with the solution phase and is potentially accessible to plants. This is carried out by addition of an enriched metal isotope to soil suspensions and quantifying the fraction of metal that is able to freely exchange with the added isotope by measuring the equilibrium isotopic ratio by ICP-MS. E-value (mg kg-1) is then calculated as follows: E-Value = (Msoil/ W) (CspikeVspike/ Mspike) (Iso1IAspike -Iso2IAspikeRss / Iso2IAsoil Rss - Iso1IAsoil) where M is the average atomic mass of the metal in the soil or the spike, W is the mass of soil (kg), Cspike is the concentration of the metal in the spike (mg L-1), Vspike is the volume of spike (L), IA is isotopic abundance, and Rss is the equilibrium ratio of isotopic abundances (Iso1:Iso2). Isotopic dilution has been successfully applied to determine E-values for several elements. However, to our knowledge, this method has not yet

Plutonium isotope ratios in polychaete worms

International Nuclear Information System (INIS)

Beasley, T.M.; Fowler, S.W.

1976-01-01

Reference is made to recent reports that suggest that terrestrial and aquatic organisms may preferentially take up 238 Pu compared with sup(239+240)Pu. It is stated that although kinetic isotope effects are known to occur in biological systems for low mass number elements, such as H, C and N, such effects are generally discounted with higher mass numbers, and differences in the biological 'uptake' of isotopes of high mass number elements, such as those of Pu, are normally attributable to differences in the chemical or physical forms of the isotopes or to different quantities of isotopes available to organisms. This has been applied to explain differential Pu isotope behaviour in animals under controlled laboratory conditions, but it is not certain that it can be applied to explain anomalies of Pu isotope behaviour in organisms contaminated by nuclear test debris or by wastes from nuclear fuel reprocessing plants. Geochemical weathering may also have an effect. Described here are experiments in which it was found that deposit feeding marine worms living in sediments contaminated in different ways with Pu isotopes did not show preferential accumulation of 238 Pu. The worms had been exposed to different chemical and physical forms of the isotopes, including exposure to laboratory-labelled sediment, sediment collected from a former weapons test site, and sediment contaminated by wastes from a nuclear fuel reprocessing plant. The worms were allowed to accumulate Pu for times of 5 to 40 days. Isotope ratios were determined by α-spectrometric techniques. It is considered that the results are important for environmental samples where Pu activity levels are low. (U.K.)

Comparison of mass-spectrometry and α-counting in analysis of uranium and plutonium isotopes in environmental samples

International Nuclear Information System (INIS)

Irleweck, K.; Pichlmayer, F.

1980-01-01

The determination of trace amounts of U and Pu isotopes is of interest in environmental and personal monitoring programmes. Commonly after preconcentration and separation of the radionuclides a proper sample is prepared electrolytically and the measurements are performed by alpha spectrometry. Some investigations on uranium isotopic abundances and on plutonium fallout deposition in soil have been carried out in this way. It is impossible to distinguish between the isotopes 239 Pu and 240 Pu by alpha spectrometry, however, because their α-energies are too close together. Such determinations can only be carried out by mass spectrometry. Specific Pu emissions, e.g. from nuclear production plants, can be discriminated from the global fallout level. Mass spectrometry is the more sensitive method for measuring long-lived nuclides compared with α-spectrometry. In the case of soil analysis, however, Pu detection is obstructed by the high natural uranium content, usually in the range 0.2 to 2.0 ppm which exceeds the trace amounts of plutonium by several orders of magnitude. This work describes a chemical procedure which separates U/Pu sufficiently for alpha spectrometry as well as for mass spectrometry, and compares results of environmental analysis applying both methods. (author)

Monte Carlo Techniques for the Comprehensive Modeling of Isotopic Inventories in Future Nuclear Systems and Fuel Cycles. Final Report

International Nuclear Information System (INIS)

Paul P.H. Wilson

2005-01-01

The development of Monte Carlo techniques for isotopic inventory analysis has been explored in order to facilitate the modeling of systems with flowing streams of material through varying neutron irradiation environments. This represents a novel application of Monte Carlo methods to a field that has traditionally relied on deterministic solutions to systems of first-order differential equations. The Monte Carlo techniques were based largely on the known modeling techniques of Monte Carlo radiation transport, but with important differences, particularly in the area of variance reduction and efficiency measurement. The software that was developed to implement and test these methods now provides a basis for validating approximate modeling techniques that are available to deterministic methodologies. The Monte Carlo methods have been shown to be effective in reproducing the solutions of simple problems that are possible using both stochastic and deterministic methods. The Monte Carlo methods are also effective for tracking flows of materials through complex systems including the ability to model removal of individual elements or isotopes in the system. Computational performance is best for flows that have characteristic times that are large fractions of the system lifetime. As the characteristic times become short, leading to thousands or millions of passes through the system, the computational performance drops significantly. Further research is underway to determine modeling techniques to improve performance within this range of problems. This report describes the technical development of Monte Carlo techniques for isotopic inventory analysis. The primary motivation for this solution methodology is the ability to model systems of flowing material being exposed to varying and stochastically varying radiation environments. The methodology was developed in three stages: analog methods which model each atom with true reaction probabilities (Section 2), non-analog methods

The Environmental Assessment Technique: An Empirical Study.

Science.gov (United States)

Overall, Jesse U., IV

The purpose of the study was to investigate the effectiveness of Alexander Astin's Environmental Assessment Technique (EAT) in describing the environmental press at a large public university, California State University at Los Angeles. Results indicate that EAT is a very economical method for broadly describing aspects of a university's…

Sm isotope composition and Sm/Eu ratio determination in an irradiated 153Eu sample by ion exchange chromatography-quadrupole inductively coupled plasma mass spectrometry combined with double spike isotope dilution technique

International Nuclear Information System (INIS)

Bourgeois, M.; Isnard, H.; Gourgiotis, A.; Stadelmann, G.; Gautier, C.; Mialle, S.; Nonell, A.; Chartier, F.

2011-01-01

Within the framework of the research undertaken by the French Atomic Energy Commission on transmutation of long-lived radionuclides, targets of highly enriched actinides and fission products were irradiated in the fast neutron reactor Phenix. Precise and accurate measurements of the isotopic and elemental composition of the enriched elements are therefore required. In order to obtain the uncertainties of several per mil and to reduce handling time and exposure to analyst on radioactive material, the on-line coupling of ion exchange chromatography with quadrupole inductively coupled plasma mass spectrometry has been associated with the technique of the double spike isotope dilution. We present in this paper the results obtained on an irradiated sample of Europium oxide powder (enriched at 99.13% in 153 Eu). After irradiation of around 5 mg of Eu 2 O 3 powder the theoretical calculations predict the formation of several micrograms of gadolinium and samarium isotopes. In relation to the very high activity of the sample after irradiation and the very low quantity of Sm formed, the on-line ion exchange chromatography separation of Gd, Sm and Eu before Sm isotope ratio measurements has been developed for the quantification of the 152 Sm/ 153 Eu ratio. These on-line measurements were associated with the double spike isotope dilution technique after calibration of a 147 Sm/ 151 Eu spike solution. The external reproducibility of Sm isotopic ratios was determined to be around 0.5% (2 σ) resulting in a final uncertainty on the 152 Sm/ 153 Eu ratio of around 1% (2 σ). These on-line measurements present therefore a robust and high-throughput alternative to the thermal-ionisation mass spectrometry technique used so far in combination with off-line chromatographic separation, particularly in nuclear applications where characterisation of high activity sample solutions is required. (authors)

Vitamin A equivalency and apparent absorption of ß-carotene in ileostomy subjects using a dual-isotope dilution technique

NARCIS (Netherlands)

Bouwman, C.A.; Naber, T.H.J.; Breemen, van R.B.; Zhu, D.; Dicke, H.; Siebelink, E.; Hulshof, P.J.M.; Russel, F.G.M.; Schaafsma, G.; West, C.E.

2010-01-01

The objective was to quantify the vitamin A equivalency of ß-carotene in two diets using a dual-isotope dilution technique and the apparent ß-carotene absorption as measured by the oral–faecal balance technique. Seventeen healthy adults with an ileostomy completed the 4-week diet-controlled,

Vitamin A equivalency and apparent absorption of beta-carotene in ileostomy subjects using a dual-isotope dilution technique.

NARCIS (Netherlands)

Loo-Bouwman, C.A. Van; Naber, T.H.; Breemen, R.B. van; Zhu, D.; Dicke, H.; Siebelink, E.; Hulshof, P.J.; Russel, F.G.M.; Schaafsma, G.; West, C.E.

2010-01-01

The objective was to quantify the vitamin A equivalency of beta-carotene in two diets using a dual-isotope dilution technique and the apparent beta-carotene absorption as measured by the oral-faecal balance technique. Seventeen healthy adults with an ileostomy completed the 4-week diet-controlled,

Assessment of aquifer system using isotope techniques in urban centres Raipur, Calcutta and Jodhpur, India

International Nuclear Information System (INIS)

Sinha, U.K.; Kulkarni, K.M.; Sharma, S.; Ray, A.; Bodhankar, N.

2002-01-01

Three urban centres Raipur, Calcutta and Jodhpur were studied using isotope techniques ( 18 O, 2 H, 3 H, 13 C, and 14 C) and chemistry with different objectives. Groundwater in Raipur city is susceptible to contamination near waste disposal sites, landfills and dairy farms. Shallow groundwater is more affected by contamination than deeper zone groundwater. A few shallow zone groundwater samples in Jadavpur area of Calcutta city show arsenic concentration above permissible level. Stable isotope values of these groundwater samples indicate that they are depleted and tritium results show that they have less residence time. Deep groundwater is arsenic free and old. Seepage in the basement and rise of static water level of some parts of Jodhpur city has been observed from March 1998 onwards. Isotopic, hydrogeological and chemical analyses data has indicated that lake water is contributing to seepage water in the basement. (author)

Synthesis of isotopically modified ZnO nanoparticles and their potential as nanotoxicity tracers

International Nuclear Information System (INIS)

Dybowska, Agnieszka D.; Croteau, Marie-Noele; Misra, Superb K.; Berhanu, Deborah; Luoma, Samuel N.; Christian, Paul; O'Brien, Paul; Valsami-Jones, Eugenia

2011-01-01

Understanding the behavior of engineered nanoparticles in the environment and within organisms is perhaps the biggest obstacle to the safe development of nanotechnologies. Reliable tracing is a particular issue for nanoparticles such as ZnO, because Zn is an essential element and a common pollutant thus present at elevated background concentrations. We synthesized isotopically enriched (89.6%) with a rare isotope of Zn ( 67 Zn) ZnO nanoparticles and measured the uptake of 67 Zn by L. stagnalis exposed to diatoms amended with the particles. Stable isotope technique is sufficiently sensitive to determine the uptake of Zn at an exposure equivalent to lower concentration range ( -1 ). Without a tracer, detection of newly accumulated Zn is significant at Zn exposure concentration only above 5000 μg g -1 which represents some of the most contaminated Zn conditions. Only by using a tracer we can study Zn uptake at a range of environmentally realistic exposure conditions. - ZnO nanoparticles with distinct isotopic composition can be tailor synthesized to be used as tracers of environmental fate and uptake by organisms.

Trace uranium analysis in geological sample by isotope dilution-alpha spectrometry and comparison with other techniques

International Nuclear Information System (INIS)

Shihomatsu, H.M.; Iyer, S.S.

1988-12-01

Establishment of uranium determination in geological samples by alpha spectrometric isotope dilution technique using 233 U tracer is described in the present work. The various steps involved in the method namely, preparation of the sample, electrodeposition, alpha spectrometry, isotope dilution, calculation of the concentration and error statistics are discussed in detail. The experimental parameters for the electrodeposition of uranium, like current density, pH concentration of the electrolyte solution, deposition time, electrode distance were all optimised based on the efficiency of the deposition. The total accuracy and precision of the IDAS using 233 U tracer in the determination of uranium in mineral and granite samples were of the order of 1 to 2% for the concentration range of 50-1500 ppm of U. Our results are compared with those obtained by others workers using similar and different techniques. (author) [pt

Isotopic studies in soil and plant nutrition

International Nuclear Information System (INIS)

Pasricha, N.S.

2001-01-01

One of the most important peaceful applications of isotopes is in research for the enhancement of our understanding for increased crop production and better management of resources with higher economic efficiency and environmental safety. Nuclear techniques helped in generating useful information on such aspects as use-efficiency of fertilizer nutrients, quantifying their losses from soil and their biological transformations. Such information was, hitherto, obtained indirectly by conventional methods. Radio and stable isotopes have also been successfully employed for getting information in such diverse fields as soil erosion, turnover of soil organic matter, pesticide retention in soil ground water recharge etc. The property of 137 Cs adhering tightly to certain exchange surface in soil and its chemically inert nature has made it a useful tool for soil erosion studies. In this paper, applications of isotopes in the research and other such studies as degradation, movement and retention of pesticides, movement of nitrate in soil, biological and ammoniacal nitrogen fixation in soil is discussed

Analysis of [U-13C6]glucose in human plasma using liquid chromatography/isotope ratio mass spectrometry compared with two other mass spectrometry techniques

NARCIS (Netherlands)

Schierbeek, H.; Moerdijk-Poortvliet, T.C.W.; van den Akker, C.H.P.; te Braake, F.W.J.; Boschker, H.T.S.; van Goudoever, J.B.

2009-01-01

The use of stable isotope labelled glucose provides insight into glucose metabolism. The 13C-isotopic enrichment of glucose is usually measured by gas chromatography/mass spectrometry (GC/MS) or gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS). However, in both techniques

Stable isotope ratios in freshwater mussel shells as high resolution recorders of riverine environmental variation

Science.gov (United States)

Kukolich, S.; Kendall, C.; Dettman, D. L.

2017-12-01

The geochemical record stored in growth increments of freshwater mussel shells reveals annual to sub-annual changes in environmental conditions during the lifetime of the organism. The carbon, nitrogen, and oxygen stable isotope composition of aragonite shells responds to changes in water chemistry, temperature, streamflow, turbidity, growth rate, size, age, and reproduction. The goals of this study are to determine how stable isotopes can be used to reconstruct the conditions in which the mussels lived and to illuminate any vital effects that might obscure the isotopic record of those conditions. Previous research has suggested that annual δ13C values decrease in older freshwater mussel shells due to lower growth rates and greater incorporation of dietary carbon into the shell with increasing age. However, a high-resolution, seasonal investigation of δ13C, δ15N, and δ18O as they relate to organism age has not yet been attempted in freshwater mussels. A total of 28 Unionid mussels of three different species were collected live in 2011 in the Tennessee River near Paducah, Kentucky, USA. In this study, we analyzed the shell nacre and external organic layers for stable carbon, nitrogen, and oxygen isotope ratios, focusing on growth bands formed between 2006 and 2011. We present a time series of shell δ13C, δ18O, and δ15N values with monthly resolution. We also compare the shell-derived geochemical time series to a time series of the δ13C and δ15N of particulate organic matter, δ13C of DIC, δ18OWater, and water temperature in which the mussels lived. Results show that environmental factors such as water temperature and primary productivity dominate shell chemistry while animal age has little or no effect.

Application of TIMS in isotope correlations for determining the isotope ratios of plutonium

International Nuclear Information System (INIS)

Alamelu, D.; Aggarwal, S.K.

2003-01-01

Thermal ionisation mass spectrometry (TIMS) is a well-recognized technique for determining the isotopic composition of Pu in irradiated nuclear fuel samples. Other mass spectrometric methods such as ICPMS, SIMS can also be employed for the isotopic analysis of Pu. In the event of non-availability of a mass spectrometer, other techniques such as gamma spectrometry and alpha spectrometry can also be used. They have a limited applicability since data on all the Pu isotopes cannot be obtained

Anglo-Saxon animal husbandry techniques revealed though isotope and chemical variations in cattle teeth

International Nuclear Information System (INIS)

Evans, J.A.; Tatham, S.; Chenery, S.R.; Chenery, C.A.

2007-01-01

The Sr concentration and isotope composition of tooth enamel from domesticated animals from two neighbouring Anglo-Saxon settlements, at Empingham (6-7th century) and Ketton (10-12th century) in Rutland, central England, are compared both with each other, and with associated human populations. Data from the Empingham II site form discrete fields in Sr concentration and isotope composition space for cattle, pig and sheep with a partial overlap of the human and pig fields. By contrast there is significant overlap in all the animal and human data fields from the Ketton site. The differences in data distribution between the two sites are attributed to animal husbandry techniques, as the surface geology of the two areas is very similar, implying geological factors are an unlikely cause of the difference. It is suggested that the grazing and feeding patterns of animals at the Empingham II site were controlled and restricted, whereas at the Ketton site the animals grazed and foraged freely over a common area. Strontium isotope variation within cattle molars from the two settlements show marked differences that reflect the nature of their feeding and rearing. The enamel from a cattle molar from the Empingham II site has a well-defined, systematic variation of Sr isotope composition with Sr concentration, whereas no such patterns exist in a comparable cattle molar from Ketton. Chemical and O isotope variations in the cattle tooth from Empingham II show sympathetic variation of Sr and Ba concentrations with Sr isotope composition from cusp to cervix. The cusp has higher Sr and Ba concentrations log (Sr/Ca) ratio of -3.1 and 87 Sr/ 86 Sr ratio of 0.71151 where as the cervical region of the enamel has log (Sr/Ca) = -3.3 and 87 Sr/ 86 Sr = 0.71061

Anglo-Saxon animal husbandry techniques revealed though isotope and chemical variations in cattle teeth

Energy Technology Data Exchange (ETDEWEB)

Evans, J.A. [NERC Isotope Geosciences Laboratory, BGS, Keyworth, Nottingham NG12 5GG (United Kingdom)], E-mail: je@nigl.nerc.ac.uk; Tatham, S. [School of Archaeology and Ancient History, University of Leicester, Leicester LE1 7RH (United Kingdom); Chenery, S.R. [British Geological Survey, Keyworth, Nottingham NG12 5GG (United Kingdom); Chenery, C.A. [NERC Isotope Geosciences Laboratory, BGS, Keyworth, Nottingham NG12 5GG (United Kingdom)

2007-09-15

The Sr concentration and isotope composition of tooth enamel from domesticated animals from two neighbouring Anglo-Saxon settlements, at Empingham (6-7th century) and Ketton (10-12th century) in Rutland, central England, are compared both with each other, and with associated human populations. Data from the Empingham II site form discrete fields in Sr concentration and isotope composition space for cattle, pig and sheep with a partial overlap of the human and pig fields. By contrast there is significant overlap in all the animal and human data fields from the Ketton site. The differences in data distribution between the two sites are attributed to animal husbandry techniques, as the surface geology of the two areas is very similar, implying geological factors are an unlikely cause of the difference. It is suggested that the grazing and feeding patterns of animals at the Empingham II site were controlled and restricted, whereas at the Ketton site the animals grazed and foraged freely over a common area. Strontium isotope variation within cattle molars from the two settlements show marked differences that reflect the nature of their feeding and rearing. The enamel from a cattle molar from the Empingham II site has a well-defined, systematic variation of Sr isotope composition with Sr concentration, whereas no such patterns exist in a comparable cattle molar from Ketton. Chemical and O isotope variations in the cattle tooth from Empingham II show sympathetic variation of Sr and Ba concentrations with Sr isotope composition from cusp to cervix. The cusp has higher Sr and Ba concentrations log (Sr/Ca) ratio of -3.1 and {sup 87}Sr/{sup 86}Sr ratio of 0.71151 where as the cervical region of the enamel has log (Sr/Ca) = -3.3 and {sup 87}Sr/{sup 86}Sr = 0.71061.

Proceedings of the international colloque on the use of isotopic techniques in water and soil resources field

International Nuclear Information System (INIS)

Laboratoire de geochimie isotopique et de paleoclimatologie de l'ecole nationale d'ingenieurs, Sfax

1996-01-01

This colloque deals with the use of isotopic techniques in water and soil field. 24 papers were read. Experiences of Tunisia, Algeria, Morocco, Mexico and African equator region were exposed. Articles selected for INIS

Hertelendi Laboratory of Environmental Studies

International Nuclear Information System (INIS)

Svingor, E.; Molnar, M.; Palcsu, L.; Futo, I.; Rinyu, L.; Mogyorosi, M.; Major, Z.; Bihari, A.; Vodila, G.; Janovics, R.; Papp, L.; Major, I.

2010-01-01

1. Introduction. The Hertelendi Laboratory for Environmental Studies (HEKAL) belongs to the Section of Environmental and Earth Sciences. It is a multidisciplinary laboratory dedicated to environmental research, to the development of nuclear analytical methods and to systems technology. During its existence of more than 15 years it has gained some reputation as a prime laboratory of analytical techniques, working with both radio- and stable isotopes. It has considerable expertise in isotope concentration measurements, radiocarbon dating, tritium measurements, in monitoring radioactivity around nuclear facilities and in modelling the movement of radionuclides in the environment. Many of its projects are within the scope of interest of the Paks Nuclear Power Plant. Our research activity is mainly concerned with the so-called environmental isotopes. This term denotes isotopes, both stable and radioactive, that are present in the natural environment either as a result of natural processes or of human activities. In environmental research isotopes are generally applied either as tracers or as age indicators. An ideal tracer is defined as a substance that behaves in the system studied exactly as the material to be traced as far as the examined parameters are concerned, but has at least one property that distinguishes it from the traced material. The mass number of an isotope is such an ideal indicator. In 2007 the laboratory assumed the name of Dr. Ede Hertelendi to honour the memory of the reputed environmental physicist who founded the group and headed it for many years. The current core of the laboratory staff is made up of his pupils and coworkers. This team was like a family to him. The group owes it to his fatherly figure that it did not fall apart after his death, but advanced with intense work and tenacity during the last decade. One of his first pupils, Mihaly Veres returned to the laboratory as a private entrepreneur and investor in 2005, and in the framework of

Use of stable isotope techniques in soil organic matter studies

International Nuclear Information System (INIS)

Gerzabek, M.H.

1998-01-01

method in estimating absolute rates of mineralisation, immobilisation, nitrification and nitrate reduction in soil, which cannot be directly deduced from non-tracer experiments. A very interesting topic seems to be the measurement of nitrogen released from organic residues, like N-fixing plants, sewage sludge or other manures. Further potential of stable isotope techniques in SOM dynamics studies can be envisaged in the field of quantitating the pools contributing to N-mineralization, the role of soil microbial biomass in this context, the sulphur cycle ( 34 S), climate change and the impact of nitrogen oxide pollution on SOM dynamics, especially in semi-natural environments

Isotopes in medical diagnosis. New techniques reviewed at Vienna symposium

Energy Technology Data Exchange (ETDEWEB)

NONE

1959-04-15

The medical uses of radioisotopes cover diagnosis and therapy as well as clinical research. There is specialized equipment not only detects the radiations from a radioactive substance inside the body, but also produces a two-dimensional visual image of the size and functional condition of tissue that absorbs this substance. This is known as medical radioisotope scanning, aimed at determining the distribution of a radioisotope within an organ which specifically concentrates a radioisotope. Methods of scanning are exceedingly complex, and although a variety of equipment is now available for the automatic determination of the distribution of a radioisotope in an organ, experience of their use is still limited. To facilitate an adequate exchange of views and a pooling of experience in this field, the International Atomic Energy Agency and the World Health Organization recently arranged a seminar to discuss the techniques and results of scanning. Topics discussed included problems of collimation, sensitivity patterns of various collimating systems, optimum isotope concentrations, essential requirements for obtaining satisfactory visualization by a scanner, basic principles of scintillation counting, a the scintillation camera, isotope scanning for studies on liver disorders and liver tumours, radiogold used for liver scanning, scanning the liver and pancreas with the help of positron-emitting isotopes, measuring the distribution of radioisotopes in deep lying tissues by detection of 'bremsstrahlen', 'profile counting', brain tumour scanning with the usage of radioarsenic or radioiodine-labelled albumen, different aspects of thyroid scanning, value and methods of scanning in thyroid cancer as well as scanning procedures in non-cancerous thyroid disease. During the discussions Dr. Keroe (IAEA) demonstrated a new electronic device, the use of which results in a substantial increase of contrast and resolution of the recordings of a scanning machine, and which is the first

Isotope methods in water resources assessment and environmental management

International Nuclear Information System (INIS)

Araguas-Araguas, L.

1996-01-01

Availability of water and protection of water resources have become top environmental issues in many countries. Governments are forced to issue strict guidelines to protect the environment and create agencies to pursue these aspects as well as enforce such regulations. The supply of good-quality water from rivers and lakes is becoming a costly and complex problem for many institutes responsible for water supply. Because of the high pollution levels in surface waters, ground water is the main source of drinking water in many countries. It is estimated that 1.5 billion people world-wide depend on it for drinking water. Since ground water cannot be directly measured, and despite its importance for drinking purposes there is not enough public concern about its protection. In other cases, it is found that the exploited ground water is not a renewable resource. In many countries in arid and semi-arid regions, fossil ground water is being tapped for extensive agricultural development, but such extraction depletes the reserves, in the same way as an oil reservoir. The availability of correct information, before decisions are taken will lead to improved management of water resources, distributing the available resources for different uses according to their quality, and ultimately, to manage the resource. Nuclear science has developed a series of methodologies based on the use of naturally-occurring isotopes and artificial tracers to study the processes involved in the occurrence and circulation of water. The discipline called 'Isotope Hydrology' provides a deep insight into many parts of the water cycle; from the evaporation over the ocean or the continents, to the formation of surface runoff and ground water and in the discharge of aquifer systems into the ocean. Isotope hydrology, as a scientific and applied discipline in earth sciences, was created during the late 1950s and early 1960s, beyond the classical hydrological science. In these early stages, new methodologies

Applications of stable isotopes

International Nuclear Information System (INIS)

Letolle, R.; Mariotti, A.; Bariac, T.

1991-06-01

This report reviews the historical background and the properties of stable isotopes, the methods used for their measurement (mass spectrometry and others), the present technics for isotope enrichment and separation, and at last the various present and foreseeable application (in nuclear energy, physical and chemical research, materials industry and research; tracing in industrial, medical and agronomical tests; the use of natural isotope variations for environmental studies, agronomy, natural resources appraising: water, minerals, energy). Some new possibilities in the use of stable isotope are offered. A last chapter gives the present state and forecast development of stable isotope uses in France and Europe

Stable oxygen and hydrogen isotopes of brines - comparing isotope ratio mass spectrometry and isotope ratio infrared spectroscopy

Science.gov (United States)

Ahrens, Christian; Koeniger, Paul; van Geldern, Robert; Stadler, Susanne

2013-04-01

Today's standard analytical methods for high precision stable isotope analysis of fluids are gas-water equilibration and high temperature pyrolysis coupled to isotope ratio mass spectrometers (IRMS). In recent years, relatively new laser-based analytical instruments entered the market that are said to allow high isotope precision data on nearly every media. This optical technique is referred to as isotope ratio infrared spectroscopy (IRIS). The objective of this study is to evaluate the capability of this new instrument type for highly saline solutions and a comparison of the analytical results with traditional IRMS analysis. It has been shown for the equilibration method that the presence of salts influences the measured isotope values depending on the salt concentration (see Lécuyer et al, 2009; Martineau, 2012). This so-called 'isotope salt effect' depends on the salt type and salt concentration. These factors change the activity in the fluid and therefore shift the isotope ratios measured by the equilibration method. Consequently, correction factors have to be applied to these analytical data. Direct conversion techniques like pyrolysis or the new laser instruments allow the measurement of the water molecule from the sample directly and should therefore not suffer from the salt effect, i.e. no corrections of raw values are necessary. However, due to high salt concentrations this might cause technical problems with the analytical hardware and may require labor-intensive sample preparation (e.g. vacuum distillation). This study evaluates the salt isotope effect for the IRMS equilibration technique (Thermo Gasbench II coupled to Delta Plus XP) and the laser-based IRIS instruments with liquid injection (Picarro L2120-i). Synthetic salt solutions (NaCl, KCl, CaCl2, MgCl2, MgSO4, CaSO4) and natural brines collected from the Stassfurt Salt Anticline (Germany; Stadler et al., 2012) were analysed with both techniques. Salt concentrations ranged from seawater salinity

Nuclear analysis techniques and environmental sciences

International Nuclear Information System (INIS)

1997-10-01

31 theses are collected in this book. It introduced molecular activation analysis micro-PIXE and micro-probe analysis, x-ray fluorescence analysis and accelerator mass spectrometry. The applications about these nuclear analysis techniques are presented and reviewed for environmental sciences

New trends in sample preparation techniques for environmental analysis.

Science.gov (United States)

Ribeiro, Cláudia; Ribeiro, Ana Rita; Maia, Alexandra S; Gonçalves, Virgínia M F; Tiritan, Maria Elizabeth

2014-01-01

Environmental samples include a wide variety of complex matrices, with low concentrations of analytes and presence of several interferences. Sample preparation is a critical step and the main source of uncertainties in the analysis of environmental samples, and it is usually laborious, high cost, time consuming, and polluting. In this context, there is increasing interest in developing faster, cost-effective, and environmentally friendly sample preparation techniques. Recently, new methods have been developed and optimized in order to miniaturize extraction steps, to reduce solvent consumption or become solventless, and to automate systems. This review attempts to present an overview of the fundamentals, procedure, and application of the most recently developed sample preparation techniques for the extraction, cleanup, and concentration of organic pollutants from environmental samples. These techniques include: solid phase microextraction, on-line solid phase extraction, microextraction by packed sorbent, dispersive liquid-liquid microextraction, and QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe).

Future trends in the application of isotopes and radiation

Energy Technology Data Exchange (ETDEWEB)

Glubrecht, H [Institut fuer Biophysik, Technische Universitaet Hannover (Germany)

1977-12-15

medicine and biomedical research is radioimmunoassay (RIA). Measurement of elemental composition of human body samples also has a high diagnostic value for large-scale screening of infectious and non-infectious diseases. Strong increase is to be foreseen in the application of gauges and other radiation analytical methods. Promising techniques in the petrol industry are the quantitative determination of hydrocarbon saturation by the use of pulsed-neutron capture logs and logs based on measurements of gamma rays from inelastic neutron scattering. Mineral exploration and mining may strongly profit from the development of portable EDXRF instruments using isotopic sources and high resolution Si(Li) detectors. In basic studies of process dynamics, tracer techniques may play an increasing role, particularly in the optimization of low-grade ore exploitation. Ionizing radiation can produce cross-linking and grafting in plastic and rubber. It is to be expected that more attention will be paid to these energy-saving processes in the future. The use of ?natural? isotope measurements ({sup 14}C, {sup 3}H) and of isotope ratios ({sup 2}H/{sup 1}H, {sup 18}O/{sup 16}O) has probably reached the highest level of sophistication in its application to problems associated with the assessment of water resources. The world-wide energy problem has prompted a new assessment of the potential of geothermal sources of energy. Environmental isotopes are being used in the hydrological study of geothermal systems environmental control and monitoring without making use of nuclear methods. NAA and EDXRF allow fast screening of more than 30 elements of importance in environmental pollution control. Future trends can be described by extrapolating from the present situation. Although the trends discussed in this paper may change it is clear that isotopes and radiation have an increasingly wide field of application i and strong future developments.

Recent Developments in Trace, Ultratrace and Isotope Ratio Measurements in Inductively Coupled Plasma Mass Spectrometry

International Nuclear Information System (INIS)

Zahran, N. F.

2004-01-01

Inductively coupled plasma mass spectrometry (ICP-MS) and Laser Ablation (LA-ICP-MS) are recent techniques for trace, ultratrace and isotope ratio measurements. Main features of these techniques and their figure of merit and capabilities are discussed. An overview of ICP-MS instrument is presented in addition to its precision, accuracy and detection limits. Uses of ICP-MS in environmental monitoring in some cases for detection of some radio nuclides are presented. Two geological applications namely, zircon grains analysis and age dating of Rb-Sr method are presented. Zn elemental and isotopic analyses in blood and serum as a biological application is shown. (Author)

Isotope Enrichment Detection by Laser Ablation - Laser Absorption Spectrometry: Automated Environmental Sampling and Laser-Based Analysis for HEU Detection

International Nuclear Information System (INIS)

Anheier, Norman C.; Bushaw, Bruce A.

2010-01-01

The global expansion of nuclear power, and consequently the uranium enrichment industry, requires the development of new safeguards technology to mitigate proliferation risks. Current enrichment monitoring instruments exist that provide only yes/no detection of highly enriched uranium (HEU) production. More accurate accountancy measurements are typically restricted to gamma-ray and weight measurements taken in cylinder storage yards. Analysis of environmental and cylinder content samples have much higher effectiveness, but this approach requires onsite sampling, shipping, and time-consuming laboratory analysis and reporting. Given that large modern gaseous centrifuge enrichment plants (GCEPs) can quickly produce a significant quantity (SQ ) of HEU, these limitations in verification suggest the need for more timely detection of potential facility misuse. The Pacific Northwest National Laboratory (PNNL) is developing an unattended safeguards instrument concept, combining continuous aerosol particulate collection with uranium isotope assay, to provide timely analysis of enrichment levels within low enriched uranium facilities. This approach is based on laser vaporization of aerosol particulate samples, followed by wavelength tuned laser diode spectroscopy to characterize the uranium isotopic ratio through subtle differences in atomic absorption wavelengths. Environmental sampling (ES) media from an integrated aerosol collector is introduced into a small, reduced pressure chamber, where a focused pulsed laser vaporizes material from a 10 to 20-(micro)m diameter spot of the surface of the sampling media. The plume of ejected material begins as high-temperature plasma that yields ions and atoms, as well as molecules and molecular ions. We concentrate on the plume of atomic vapor that remains after the plasma has expanded and then cooled by the surrounding cover gas. Tunable diode lasers are directed through this plume and each isotope is detected by monitoring absorbance

An environmental isotope study of a major dewatering operation at Sishen mine, northern Cape Province

International Nuclear Information System (INIS)

Verhagen, B.T.; Smith, P.E.; Dziembowski, Z.; Oosthuizen, J.H.

1978-01-01

Geohydrological studies using environmental isotopes of the Sishen iron ore mine were started after major rainfalls in 1973/74 produced flooding of the open cast workings. The mine is underlain by dolomite which has been extensively karstified and geohydrologically compartmentalized by several dykes. Major dewatering takes place in a pit called Hill 2 by pumping an array of large diameter boreholes at a combined rate of 2000 m 3 h -1 . The probable recharge areas (dolomites, superficial Kalahari Beds) were isotopically surveyed to assess their relative importance to the dewatering problem. Several major pumping outlets at the mine were regularly sampled for isotopic and chemical analysis and from the data a preliminary mixing model is proposed. The data also show that with the total pumped volume up to March 1978, no very recent (i.e. post bomb) water has reached the dewatering points. On this basis a minimum storage of 0.75 x 10 8 m 3 is derived compared to a classical calculation of 10 8 m 3 for the compartment. Isotopic composition and response differ for waters on either side of a dyke crossing the mining area, corroborating classical evidence suggesting that the dyke acts as an aquiclude. (orig.) [de

An environmental isotope study of a major dewatering operation at Sishen mine, northern Cape Province

International Nuclear Information System (INIS)

Verhagen, B.Th.; Smith, P.E.; Oosthuizen, J.H.

1979-01-01

Geohydrological studies using environmental isotopes of the Sishen iron ore mine were started after major rainfalls in 1973/74 produced flooding of the open cast workings. The mine is underlain by dolomite which has been extensively karstified and geohydrologically compartmentalized by several dykes. Major dewatering takes place in a pit called Hill 2 by pumping an array of large-diameter boreholes at a combined rate of 2000m 3 h -1 . The probable recharge areas (dolomites, superficial Kalahari Beds) were isotopically surveyed to assess their relative importance to the dewatering problem. Several major pumping outlets at the mine were regularly sampled for isotopic and chemical analysis and from the data a preliminary mixing model is proposed. The data also show that, with the total pumped volume up to March 1978, no very recent (i.e. post-bomb) water has reached the dewatering points. On this basis a minimum storage of 0.75x10 8 m 3 is derived compared with a classical calculation of 10 8 m 3 for the compartment. Isotopic composition and response differ for waters on either side of a dyke crossing the mining area, corroborating classical evidence suggesting that the dyke acts as an aquiclude. (author)

Groundwater Inputs to Rivers: Hydrological, Biogeochemical and Ecological Effects Inferred by Environmental Isotopes

Energy Technology Data Exchange (ETDEWEB)

Stellato, L. [Centre for Isotopic Research on Cultural and Environmental heritage (CIRCE), Seconda Universita degli Studi di Napoli, Caserta (Italy); Newman, B. D. [Isotope Hydrology Section, International Atomic Energy Agency, Vienna (Austria)

2013-05-15

In an effort to improve river management, numerous studies over the past two decades have supported the concept that river water and groundwater need to be considered together, as part of a hydrologic continuum. In particular, studies of the interface between surface water and groundwater (the hyporheic zone) have seen the tight collaboration of catchment hydrologists and stream ecologists in order to elucidate processes affecting stream functioning. Groundwater and surface waters interact at different spatial and temporal scales depending on system hydrology and geomorphology, which in turn influence nutrient cycling and in-stream ecology in relation to climatic, geologic, biotic and anthropogenic factors. In this paper, groundwater inputs to rivers are explored from two different and complementary perspectives: the hydrogeological, describing the generally acknowledged mechanisms of streamflow generation and the main factors controlling stream-aquifer interactions, and the ecologic, describing the processes occurring at the hyporheical and the riparian zones and their possible effects on stream functioning and on nutrient cycling, also taking into consideration the impact of human activities. Groundwater inflows to rivers can be important controls on hot moment/hot spot type biogeochemical behaviors. A description of the common methods used to assess these processes is provided emphasizing tracer methods (including physical, chemical and isotopic). In particular, naturally occurring isotopes are useful tools to identify stream discharge components, biogeochemical processes involved in nutrient cycling (such as N and P dynamics), nutrient sources and transport to rivers, and subsurface storage zones and residence times of hyporheic water. Several studies which have employed isotope techniques to clarify the processes occurring when groundwater enters the river,are reported in this chapter, with a view to highlighting both the advantages and limitations of these

Development of Innovative Radioactive Isotope Production Techniques at the Pennsylvania State University Radiation Science and Engineering Center

Energy Technology Data Exchange (ETDEWEB)

Johnsen, Amanda M. [Pennsylvania State Univ., State College, PA (United States). Radiation Science and Engineering Center; Heidrich, Brenden [Pennsylvania State Univ., State College, PA (United States). Radiation Science and Engineering Center; Durrant, Chad [Pennsylvania State Univ., State College, PA (United States). Department of mechanical and Nuclear Engineering Center; Bascom, Andrew [Pennsylvania State Univ., State College, PA (United States). Department of mechanical and Nuclear Engineering Center; Unlu, Kenan [Pennsylvania State Univ., State College, PA (United States). Radiation Science and Engineering Center

2013-08-15

The Penn State Breazeale Nuclear Reactor (PSBR) at the Radiation Science and Engineering Center (RSEC) has produced radioisotopes for research and commercial purposes since 1956. With the rebirth of the radiochemistry education and research program at the RSEC, the Center stands poised to produce a variety of radioisotopes for research and industrial work that is in line with the mission of the DOE Office of Science, Office of Nuclear Physics, Isotope Development and Production Research and Application Program. The RSEC received funding from the Office of Science in 2010 to improve production techniques and develop new capabilities. Under this program, we improved our existing techniques to provide four radioisotopes (Mn-56, Br-82, Na-24, and Ar-41) to researchers and industry in a safe and efficient manner. The RSEC is also working to develop new innovative techniques to provide isotopes in short supply to researchers and others in the scientific community, specifically Cu-64 and Cu-67. Improving our existing radioisotopes production techniques and investigating new and innovative methods are two of the main initiatives of the radiochemistry research program at the RSEC.

Method for separating krypton isotopes

International Nuclear Information System (INIS)

Porter, J.T.

1980-01-01

Methods and apparatus for separating krypton isotopes utilizing low temperature selective infrared excitation of 85krypton difluoride in an isotopic compound mixture. Multiphoton ir excitation and uv excitation techniques are used, as well as cryogenic matrix isolation and inert buffer gas isolation techniques

Improvement of accuracy for the quantitation of selenoproteins in post-column isotope dilution technique with HPLC ICP/MS

International Nuclear Information System (INIS)

Kim, Soo Jin; Pak, Yong Nam

2016-01-01

Post-column isotope dilution (PCID) or species-unspecific isotope dilution (ID) is a very useful quantitative technique in chromatography hyphenated with inductively coupled plasma–mass spectrometer (ICP/MS). In quantitative analysis, the calibration curve method is the most common one. However, it is not an absolute technique for the determination of concentration for the samples. ID method is the absolute one for the quantitative measurement technique, which means the quantity could be determined by the fundamental unit such as weight. To use the technique, it needs some requirements and there are several restrictions especially in the application for high-performance liquid chromatography (HPLC). The impurities in eluting solvent were in question. Thus, different purity of AA was examined and the result is shown in Figure 3. Figure 3(a) is the one for low (98%) and Figure 3(b) is high (99.999%) purity AA. The dotted area is for the eluting solvent. When low purity of 98% AA was introduced, the background was increasing while it remained the same for high-purity AA

Improvement of accuracy for the quantitation of selenoproteins in post-column isotope dilution technique with HPLC ICP/MS

Energy Technology Data Exchange (ETDEWEB)

Kim, Soo Jin; Pak, Yong Nam [Dept. of Chemistry Education, Korea National University of Education, Cheongju (Korea, Republic of)

2016-11-15

Post-column isotope dilution (PCID) or species-unspecific isotope dilution (ID) is a very useful quantitative technique in chromatography hyphenated with inductively coupled plasma–mass spectrometer (ICP/MS). In quantitative analysis, the calibration curve method is the most common one. However, it is not an absolute technique for the determination of concentration for the samples. ID method is the absolute one for the quantitative measurement technique, which means the quantity could be determined by the fundamental unit such as weight. To use the technique, it needs some requirements and there are several restrictions especially in the application for high-performance liquid chromatography (HPLC). The impurities in eluting solvent were in question. Thus, different purity of AA was examined and the result is shown in Figure 3. Figure 3(a) is the one for low (98%) and Figure 3(b) is high (99.999%) purity AA. The dotted area is for the eluting solvent. When low purity of 98% AA was introduced, the background was increasing while it remained the same for high-purity AA.

Estimation of groundwater velocities from Yucca Flat to the Amargosa Desert using geochemistry and environmental isotopes

International Nuclear Information System (INIS)

Hershey, R.L.; Acheampong, S.Y.

1997-06-01

Geochemical and isotopic data from groundwater sampling locations can be used to estimate groundwater flow velocities for independent comparison to velocities calculated by other methods. The objective of this study was to calculate groundwater flow velocities using geochemistry and environmental isotopes from the southern end of Yucca Flat to the Amargosa Desert, considering mixing of different groundwater inputs from sources each and southeast of the Nevada Test Site (NTS). The approach used to accomplish the objective of this study consisted of five steps: (1) reviewing and selecting locations where carbon isotopic groundwater analyses, reliable ionic analysis, and well completion information are available; (2) calculating chemical speciation with the computer code WATEQ4F (Ball and Nordstrom, 1991) to determine the saturation state of mineral phases for each ground water location; (3) grouping wells into reasonable flowpaths and mixing scenarios from different groundwater sources; (4) using the computer code NETPATH (Plummer et al., 1991) to simulate mixing and the possible chemical reactions along the flowpath, and to calculate the changes in carbon-13/carbon-12 isotopic ratios (δ 13 C) as a result of these reactions; and (5) using carbon-14 ( 14 C) data to calculate velocity

Methods and techniques for prediction of environmental impact

International Nuclear Information System (INIS)

1992-04-01

Environmental impact assessment (EIA) is the procedure that helps decision makers understand the environmental implications of their decisions. The prediction of environmental effects or impact is an extremely important part of the EIA procedure and improvements in existing capabilities are needed. Considerable attention is paid within environmental impact assessment and in handbooks on EIA to methods for identifying and evaluating environmental impacts. However, little attention is given to the issue distribution of information on impact prediction methods. The quantitative or qualitative methods for the prediction of environmental impacts appear to be the two basic approaches for incorporating environmental concerns into the decision-making process. Depending on the nature of the proposed activity and the environment likely to be affected, a combination of both quantitative and qualitative methods is used. Within environmental impact assessment, the accuracy of methods for the prediction of environmental impacts is of major importance while it provides for sound and well-balanced decision making. Pertinent and effective action to deal with the problems of environmental protection and the rational use of natural resources and sustainable development is only possible given objective methods and techniques for the prediction of environmental impact. Therefore, the Senior Advisers to ECE Governments on Environmental and Water Problems, decided to set up a task force, with the USSR as lead country, on methods and techniques for the prediction of environmental impacts in order to undertake a study to review and analyse existing methodological approaches and to elaborate recommendations to ECE Governments. The work of the task force was completed in 1990 and the resulting report, with all relevant background material, was approved by the Senior Advisers to ECE Governments on Environmental and Water Problems in 1991. The present report reflects the situation, state of

Analysis of Grassland Ecosystem Physiology at Multiple Scales Using Eddy Covariance, Stable Isotope and Remote Sensing Techniques

Science.gov (United States)

Flanagan, L. B.; Geske, N.; Emrick, C.; Johnson, B. G.

2006-12-01

Grassland ecosystems typically exhibit very large annual fluctuations in above-ground biomass production and net ecosystem productivity (NEP). Eddy covariance flux measurements, plant stable isotope analyses, and canopy spectral reflectance techniques have been applied to study environmental constraints on grassland ecosystem productivity and the acclimation responses of the ecosystem at a site near Lethbridge, Alberta, Canada. We have observed substantial interannual variation in grassland productivity during 1999-2005. In addition, there was a strong correlation between peak above-ground biomass production and NEP calculated from eddy covariance measurements. Interannual variation in NEP was strongly controlled by the total amount of precipitation received during the growing season (April-August). We also observed significant positive correlations between a multivariate ENSO index and total growing season precipitation, and between the ENSO index and annual NEP values. This suggested that a significant fraction of the annual variability in grassland productivity was associated with ENSO during 1999-2005. Grassland productivity varies asymmetrically in response to changes in precipitation with increases in productivity during wet years being much more pronounced than reductions during dry years. Strong increases in plant water-use efficiency, based on carbon and oxygen stable isotope analyses, contribute to the resilience of productivity during times of drought. Within a growing season increased stomatal limitation of photosynthesis, associated with improved water-use efficiency, resulted in apparent shifts in leaf xanthophyll cycle pigments and changes to the Photochemical Reflectance Index (PRI) calculated from hyper-spectral reflectance measurements conducted at the canopy-scale. These shifts in PRI were apparent before seasonal drought caused significant reductions in leaf area index (LAI) and changes to canopy-scale "greenness" based on NDVI values. With

Thallium determination in reference materials by isotope dilution mass spectrometry (IDMS) using thermal ionization

International Nuclear Information System (INIS)

Waidmann, E.; Hilpert, K.; Stoeppler, M.

1990-01-01

Using Isotope Dilution Mass Spectrometry (IDMS) with thermal ionization, thallium concentrations were determined in reference materials from NIST and BCR, from other sources, and reference materials from the German Environmental Specimen Bank 203 Tl spike solution is applied for the isotope dilution technique. Thallium concentrations in the investigated materials range from 2.67 μg Tl.kg -1 to 963 μg Tl.kg -1 with a relative standard deviation from 0.14 to 10%. The detection limit was 0.1 ng thallium for this work. (orig.)

Effects of extraction and derivatization techniques on recovery of organotin species in environmental matrices (W3)

International Nuclear Information System (INIS)

Wahlen, R.; Catterick, T.

2002-01-01

Full text: Organotin (OT) contamination is still persistent in most coastal environments and estuaries and can be monitored accurately by analysis of sediments and sedentary aquatic animal populations. In addition to human exposure via contaminated seafood, there is increasing concern about OT compounds in man-made consumer products. Organotin analysis involves the extraction from the matrix, derivatization (for GC analysis), separation of the different species and detection. Commonly used extraction techniques are mechanical shaking, ultrasonic agitation and microwave leaching (open or closed vessel). Accelerated solvent extraction (ASE) has also been reported. In this study, closed-vessel microwave extraction and ASE methods are compared for OT analysis in environmental tissues using separation by gas chromatography (GC) and detection by inductively coupled plasma mass-spectrometry (ICP-MS). The efficiency of an ethylation procedure with sodiumtetraethylborate (NABEt 4 ) using different matrices and derivatization durations is monitored by comparing data obtained by external calibration with results by species-specific isotope dilution analysis (SS-IDMS) of dibutyltin (TBT) and dibutyltin (DBT) enriched with 117 Sn. Uncertainty estimates for both quantification techniques will be provided. (author)

Securing a better future for all: Nuclear techniques for global development and environmental protection. NA factsheet on environment laboratories: Protecting the environment

International Nuclear Information System (INIS)

2012-01-01

According to the Millennium Development Goals, managing the environment is considered an integral part of the global development process. The main purpose of the IAEA's environment laboratories is to provide Member States with reliable information on environmental issues and facilitate decision making on protection of the environment. An increasingly important feature of this work is to assess the impact of climate change on environmental sustainability and natural resources. The IAEA's environment laboratories use nuclear techniques, radionuclides, isotopic tracers and stable isotopes to gain a better understanding of the various marine processes, including locating the sources of pollutants and their fate, their transport pathways and their ultimate accumulation in sediments. Radioisotopes are also used to study bioaccumulation in organisms and the food chain, as well as to track signals of climate change throughout history. Natural and artificial radionuclides are used to track ocean currents in key regions. They are also used to validate models designed to predict the future impact of climate change and ocean acidification. The laboratories study the fate and impact of contamination on a variety of ecosystems in order to provide effective preventative diagnostic and remediation strategies. They enhance the capability of Member States to use nuclear techniques to understand and assess changes in their own terrestrial and atmospheric environments, and adopt suitable and sustainable remediation measures when needed. Since 1995, the IAEA environment laboratories have coordinated the international network of Analytical Laboratories for the Measurement of Environmental Radioactivity, providing accurate analysis in the event of an accident or an intentional release of radioactivity. In addition, the laboratories work alongside other organizations, such as UNESCO, the IOC, UNEP and the EC. The laboratories collaborate with Member States through direct involvement with

Synthesis of isotopically modified ZnO nanoparticles and their potential as nanotoxicity tracers

Energy Technology Data Exchange (ETDEWEB)

Dybowska, Agnieszka D., E-mail: a.dybowska@nhm.ac.u [Department of Mineralogy, Natural History Museum London, Cromwell Road, London, SW7 5BD (United Kingdom); Croteau, Marie-Noele [U.S. Geological Survey, 345 Middlefield Road, MS 496, Menlo Park, CA 94025 (United States); Misra, Superb K.; Berhanu, Deborah [Department of Mineralogy, Natural History Museum London, Cromwell Road, London, SW7 5BD (United Kingdom); Luoma, Samuel N. [Department of Mineralogy, Natural History Museum London, Cromwell Road, London, SW7 5BD (United Kingdom); U.S. Geological Survey, 345 Middlefield Road, MS 496, Menlo Park, CA 94025 (United States); Christian, Paul; O' Brien, Paul [School of Chemistry, University of Manchester, M13 9PL, Manchester (United Kingdom); Valsami-Jones, Eugenia [Department of Mineralogy, Natural History Museum London, Cromwell Road, London, SW7 5BD (United Kingdom)

2011-01-15

Understanding the behavior of engineered nanoparticles in the environment and within organisms is perhaps the biggest obstacle to the safe development of nanotechnologies. Reliable tracing is a particular issue for nanoparticles such as ZnO, because Zn is an essential element and a common pollutant thus present at elevated background concentrations. We synthesized isotopically enriched (89.6%) with a rare isotope of Zn ({sup 67}Zn) ZnO nanoparticles and measured the uptake of {sup 67}Zn by L. stagnalis exposed to diatoms amended with the particles. Stable isotope technique is sufficiently sensitive to determine the uptake of Zn at an exposure equivalent to lower concentration range (<15 {mu}g g{sup -1}). Without a tracer, detection of newly accumulated Zn is significant at Zn exposure concentration only above 5000 {mu}g g{sup -1} which represents some of the most contaminated Zn conditions. Only by using a tracer we can study Zn uptake at a range of environmentally realistic exposure conditions. - ZnO nanoparticles with distinct isotopic composition can be tailor synthesized to be used as tracers of environmental fate and uptake by organisms.

Isotope dilution analysis

Energy Technology Data Exchange (ETDEWEB)

Fudge, A.

1978-12-15

The following aspects of isotope dilution analysis are covered in this report: fundamental aspects of the technique; elements of interest in the nuclear field, choice and standardization of spike nuclide; pre-treatment to achieve isotopic exchange and chemical separation; sensitivity; selectivity; and accuracy.

Field experimentation in isotope-aided studies

International Nuclear Information System (INIS)

Zapata, F.

1990-01-01

Isotopic-aided studies involve the application of isotopically labelled fertilizer as tracers for the quantitative and precise determination of the fate of specific nutrient elements in the soil/plant system. The planning of isotopic-aided studies requires a different approach from that followed in the design of normal fertilizer trials because of the cost and supply of isotopically labelled materials, the use of highly specialized equipment and the need for skillful trained staff in the use of isotope techniques both in the field/greenhouse and the laboratory. This report is intended to highlight the main points to be considered while applying those techniques in the field or greenhouse. It has been well established that nuclear techniques are a powerful tool in agricultural research. One should take advantage of the use of such techniques if the following criteria are met: The isotope method is the only way to solve a particular question or to obtain a specific piece of information. There are other methods available for such a purpose but the nuclear method provides a direct and quick means to obtain the needed information resulting in higher economic return

Coordinated research programme on the application of isotope techniques to investigate groundwater pollution final research coordination meeting and consultants' meeting. Final report

International Nuclear Information System (INIS)

Robinson, B.; Chilton, J.; Travi, Y.; Gerardo-Abaya, J.

1998-02-01

This document summarizes the IAEA Coordinated Research Programme (CRP) on the Application of Isotope Techniques to Investigate Groundwater Pollution. Summaries of 16 completed investigations are given. The completed investigations resulted to the application of 18 O, 2 H, 3 H, 13 C, 14 C, 34 S, 15 N and boron isotopes integrated to some extend with the classical hydrological tools. These studies have broadly confirmed the use of isotope techniques on two main ways: a) to assist in the interpretation of groundwater flow systems; b) to act as tracers of the origin and pathways of ta range of groundwater pollutants. Several important aspects have become clear in the CRP: it is advisable not to rely on single isotopes, but to combine where possible the use of more than one, particularly oxygen with nitrogen and sulfur; it is essential to integrate isotope techniques with conventional hydrochemistry; trace elements have an important role to play in an integrated approach to the interpretation of contamination sources and pathways. This CRP should be regarded as a stepping stone, considering that the magnitude of the problem of groundwater pollution is enormous in global terms. In order to have an impact on the understanding of groundwater pollution, the need is seen for follow-up by several CRPs targeted at specific areas or problems. Of priorities are: a) urban waste, both human and industrial; b) the origin of saline groundwater; and c) nitrate in groundwater in both agricultural and urban areas

Applications of isotopes

International Nuclear Information System (INIS)

Kirby-Smith, J.S.

1976-01-01

Current and potential applications of stable isotopes as tracers in a number of biomedical and environmental areas are discussed. It is pointed out that a wide variety of problems exist in these fields whose solutions in principle are amenable to the isotopic approach. The number and diversity of these problems as well as the unique role stable isotopes can play in their solution illustrate the importance of achieving and maintaining a broad inventory of isotopic species. Experience has demonstrated unequivocally an additional overriding requirement for widespread exploration of stable isotopes by the scientific and technical community, i.e., the need for low cost availability of the materials in quantity. Some representative applications of 12 C, 13 C, 14 N, 15 N, 16 O, 17 O, and 18 O are discussed

Perspectives of application of isotope techniques in hydrology in the Syrian Arab Republic

International Nuclear Information System (INIS)

Safadi, Chafic

1986-01-01

The Syrian Arab territories are located in the warm moderate region, under arid and semi-arid conditions. In spite of the occurrence of main springs and permanent rivers, groundwater resources available are a limiting factor for socio-economic development in several Syrian regions. Investigation and development of these resources are facing serious problems, for which the application of isotope and nuclear techniques could be a significant process and a deterministic tool. So far, and on the light of current applications, the Syrian Arab Republic is already involved in the isotopic hydrology sector, and so it is needful to set up, in the near future, a relevant unit, on a centralized basis covering the concerned authorities demands, under co-ordinated and integrated conditions. The international co-operation would be of a concrete importance in this respect, to provide the mentioned unit with equipment, training of scientific and technical staff, and consultancy services during the period of establishment. 14 refs. (Author)

Co-ordinated research project on comparative international studies of osteoporosis using isotope techniques. Report on the final research co-ordination meeting

International Nuclear Information System (INIS)

2002-01-01

In 1994, the International Atomic Energy Agency started the five-year Co-ordinated Research Project (CRP) on Comparative International Studies of Osteoporosis Using Isotope Techniques. The objectives of this study were: To harmonize the techniques of measuring BMD within the participating countries and to obtain data that can be compared between the different study groups (countries); To determine whether early adult PBM varies between populations over the age range from 15 to 50 years. In other words, to determine the age of peak bone mass in selected populations from developing countries; To explore environmental and nutritional contributions to any determined differences. Further information about the purpose and scope of the CRP may be found in the report of the Advisory Group Meeting (AGM) held in 19921 and other reports of this CRP. The fourth Research Co-ordination Meeting (RCM) for participants of the CRP, which is the subject of the present report, was held at the University of Sheffield Medical School; WHO Collaborating Center for Metabolic Bone Diseases in Sheffield, UK from 28 Feb. to 3 March 2000

Simultaneous determination of 14N and 15N isotopes in opium by proton induced γ-ray emission technique

International Nuclear Information System (INIS)

Pritty Rao; Reddy, G.L.N.; Vikram Kumar, S.; Ramana, J.V.; Raju, V.S.; Sanjiv Kumar

2012-01-01

The paper describes the simultaneous determination of 14 N and 15 N isotopes in opium by proton induced γ-ray emission (PIGE) technique. The isotopic ratio of 14 N and 15 N is a useful parameter for assigning provenance of (seized) illicit drugs. The measurement, non-destructive in nature, is performed on pellets made up of opium powders and is based on the prompt detection of 2.313 and 4.4 MeV γ-rays emanating from 14 N(p,p'γ) 14 N and 15 N(p,αγ) 12 C nuclear reactions respectively, induced simultaneously by 3.6-3.8 MeV proton beam. Positive as well as negative deviations from the natural isotopic abundance (99.63:0.37) were observed in the samples. The precision of the measurements is about 4%. The methodology provides an easy and rapid approach to determine the isotopic ratio of 14 N and 15 N and has been used for the first time in the analysis of opium. (author)

Carbon Monoxide Stable Isotopes: Extraction Technique Development and Urban Atmospheric Analysis

Science.gov (United States)

Vimont, Isaac Josef

We have developed an extraction system to analyze isotopes of carbon monoxide (CO). We then analyzed CO isotopes for two years at Indianapolis, IN, USA. These measurements were done at three towers, one of which measured incoming, background air into the city. We quantitatively removed the background signal and determined the urban CO mole fraction and isotopic enhancements. During the winter months, we constrained the isotopic signature and concluded that the majority of CO produced during the winter was produced by fossil fuel combustion. We found that the Indianapolis fossil fuel signature differed from that of studies done in Europe. Further, we performed a limited traffic study to look at CO isotopes from traffic. While this was not conclusive, it did support our hypothesis that a larger fraction of the Indianapolis vehicle fleet may have malfunctioning catalytic systems, which biases the isotopic results, particularly for delta18O. We used the wintertime fossil fuel isotopic signature to help constrain the summertime budget. It was hypothesized that a second source of CO was significant during the summer months. Oxidation of biogenically produced volatile organic compounds (BVOC's) was one possible source. Oxidized BVOC's were consistent with the changes between our winter and summer isotopic source signatures. We then used the isotopic signatures to determine that between zero and sixty percent of the summertime CO budget was produced from oxidized VOC's. This provided the first direct evidence of a larger percentage of urban CO being produced by oxidized VOC's.

On effeciency of isotopes application in industry

International Nuclear Information System (INIS)

Yankovskij, L.

1979-01-01

The final results of the long term work in the field of research, projecting and pilot production are: the technology; methods and instruments of the isotope technique and their applications in the peoples economy, especially in industry. Effectiveness of isotope technique and especially its economic effectiveness depends on the scale of application of these techniques (instrument, method, technology) in different branches of the peoples economy. Comparing expenses on istope and radiation researches with total economic effectiveness of the isotope techniques application in some countries, the total economic effectiveness of the isotope researches has been determined. The main content of the paper is the analysis of structure and dynamics of the efficiency factor for the isotope technique application in separate countries for long period of time. Determination of the total economic efficiency of the whole branch of researches, conducted according to the methodology developed by the author, on the example of isotope research in some countries, permits to make a conclusion about the state and development tendencies of these researches in the international scale and can be a good base for making decisions in the field of the scientific policy of countries [ru

Biological isotopy. Introduction to the isotopic effects and to their applications in biology

International Nuclear Information System (INIS)

Tcherkez, G.

2010-01-01

Since their discovery in the beginning of the 20. century, the study of stable isotopes has considerably developed. This domain, which remained limited in its applications until the 1990's, has become particularly important thereafter thanks to its practical applications and in particular to its economical impacts. Many techniques used in fraud control, in drugs use control, in selection of high-yield plants etc are based on isotopic abundance measurements. This reference book gives a synthesis of our actual knowledge on the use of stable isotopes and of isotope fractionation in biology. It presents the basic notions of isotopic biochemistry and explains the origin of the isotopic effects. The application principles of these effects to metabolism, to organisms physiology, to environmental biology etc are explained and detailed using examples and exercises. The first chapters present the basic knowledge which defines, from a mathematical point-of-view, the isotopic effects of chemical reactions or of physical processes taking place in biology. The measurements principle of natural isotopes abundance is then synthesised. Finally, all these notions are applied at different scales: enzymes, physiology, metabolism, environment, ecosystems and fraud crackdown. (J.S.)

Elucidating Adverse Nutritional Implications of Exposure to Endocrine-Disrupting Chemicals and Mycotoxins through Stable Isotope Techniques.

Science.gov (United States)

Owino, Victor O; Cornelius, Carolin; Loechl, Cornelia U

2018-03-23

Multiple drivers of the double burden of malnutrition (DBM) include a rapid shift from predominantly plant-based diets to energy-dense foods based on meats, milk, animal fats and vegetable oils. The shift to overweight and obesity is driven by increased exposure to mass media, urbanization, technological advances in food processing, rising income and increased population density associated with increased access to cheap foods. At the same time, undernutrition persists mainly due to food insecurity and lack of access to safe water, sanitation and adequate health care. All known nutrition interventions result in only one third reduction in stunting. Little consideration has been given to hazardous exposure to endocrine disrupting chemicals (EDCs) and microbial toxins as major components of the malnutrition-causal framework. These hazards include microbial toxins, for example, mycotoxins, and environmental pollutants such as persistent organic pollutants (POPs), some of which are known to disrupt the endocrine system. These hazards sit at the cross road of undernutrition and overweight and obesity since the exposure cuts across the critical window of opportunity (the first 1000 days). In this review, we update on the role of food and environmental contaminants, especially EDCs and aflatoxins, in child growth and on the implications for metabolic dysfunction and disease risk in later life, and discuss potential applications of nuclear and isotopic techniques to elucidate the underlying biological mechanisms, outcome indicators, as well as occurrence levels.

Integrated Assessment Of Groundwater Recharge In The North Kelantan River Basin Using Environmental Water Stable Isotopes, Tritium And Chloride Data

International Nuclear Information System (INIS)

Wan Zakaria Wan Muhamad Tahir; Nur Hayati Hussin; Ismail Yusof; Kamaruzaman Mamat; Johari Abdul Latif; Rohaimah Demanah

2014-01-01

Estimation and understanding of groundwater recharge mechanism and capacity of aquifer are essential issues in water resources investigation. An integrated study of environmental chloride content in the unsaturated zone using chloride mass balance method (CMB) and isotopic analyses of deuterium, oxygen-18, and tritium values range in the alluvial channel aquifer profiles (quaternary sediments) of the North Kelantan River basin has been carried out in order to estimate and understand groundwater recharge processes. However, the rate of aquifer recharge is one of the most difficult factors to measure in the evaluation of ground water resources. Estimation of recharge, by whatever method, is normally subject to large uncertainties and errors. In this paper, changes in stable isotopic signatures in different seasons and tritium analysis of the sampled groundwater observed at different depth in the aquifer system were evaluated. Stable isotope data are slightly below the local meteoric water line (LMWL) indicating that there is some isotopic enrichment due to direct evaporation through the soil surface which is exposed prior or during the recharging process. The overall data on water isotopic signatures from boreholes and production wells (shallow and relatively deep aquifer system) are spread over a fairly small range but somewhat distinct compared to river water isotopic compositions. Such a narrow variation in isotopic signatures of the sampled groundwaters may suggest that all groundwater samples originated from the same area of direct recharge predominantly from rainfall and nearby rivers. Environmental tritium data measured in groundwater at different depths and locations together with a medium-term of limited monthly rainfall collections were used to investigate the groundwater age distributions (residence times). The existence of groundwater in the aquifer system (sampled wells) is predominantly designated as modern (young) water that has undergone recharged

Isotopically modified silver nanoparticles to assess nanosilver bioavailability and toxicity at environmentally relevant exposures

Science.gov (United States)

Croteau, Marie-Noële; Dybowska, Agnieszka D.; Luoma, Samuel N.; Misra, Superb K.; Valsami-Jones, Eugenia

2014-01-01

A major challenge in understanding the environmental implications of nanotechnology lies in studying nanoparticle uptake in organisms at environmentally realistic exposure concentrations. Typically, high exposure concentrations are needed to trigger measurable effects and to detect accumulation above background. But application of tracer techniques can overcome these limitations. Here we synthesised, for the first time, citrate-coated Ag nanoparticles using Ag that was 99.7 % 109Ag. In addition to conducting reactivity and dissolution studies, we assessed the bioavailability and toxicity of these isotopically modified Ag nanoparticles (109Ag NPs) to a freshwater snail under conditions typical of nature. We showed that accumulation of 109Ag from 109Ag NPs is detectable in the tissues of Lymnaea stagnalis after 24-h exposure to aqueous concentrations as low as 6 ng L–1 as well as after 3 h of dietary exposure to concentrations as low as 0.07 μg g–1. Silver uptake from unlabelled Ag NPs would not have been detected under similar exposure conditions. Uptake rates of 109Ag from 109Ag NPs mixed with food or dispersed in water were largely linear over a wide range of concentrations. Particle dissolution was most important at low waterborne concentrations. We estimated that 70 % of the bioaccumulated 109Ag concentration in L. stagnalis at exposures –1 originated from the newly solubilised Ag. Above this concentration, we predicted that 80 % of the bioaccumulated 109Ag concentration originated from the 109Ag NPs. It was not clear if agglomeration had a major influence on uptake rates.

Using environmental isotopes along with major hydro-geochemical compositions to assess deep groundwater formation and evolution in eastern coastal China

Science.gov (United States)

Xu, Naizheng; Gong, Jianshi; Yang, Guoqiang

2018-01-01

Hydrochemical analysis and environmental isotopic tracing are successfully applied to study groundwater evolution processes. Located in eastern China, the Jiangsu Coastal Plain is characterized by an extensively exploited deep groundwater system, and groundwater salinization has become the primary water environmental problem. This paper provides a case study on the use of a hydrochemical and environmental isotopic approach to assess possible mixing and evolution processes at Yoco Port, Jiangsu Province, China. Hydrochemical and isotopic patterns of deep groundwater allow one to distinguish different origins in deep water systems. HCO3- is the dominant anion in the freshwater samples, whereas Na+ and Cl- are the dominant major ions in the saline samples. According to δ18O, δ2H and 14C dating, the fresh water is derived from precipitation under a colder climate during the Glacial Maximum (Dali Glacial), while the saline groundwater is influenced by glacial-interglacial cycles during the Holocene Hypsithermal. The δ18O, δ2H and 3H data confirm that deep groundwater in some boreholes is mixed with overlying saline water. The deep groundwater reservoir can be divided into a saline water sector and a fresh water sector, and each show distinct hydrochemical and isotopic compositions. The saline groundwater found in the deep aquifer cannot be associated with present seawater intrusion. Since the Last Glacial Maximum in the Late Pleistocene, the deep groundwater flow system has evolved to its current status with the decrease in ice cover and the rising of sea level. However, the hydraulic connection is strengthened by continuous overexploitation, and deep groundwater is mixed with shallow groundwater at some points.

Simultaneous determination of U and Pu isotopes by alpha spectrometry

International Nuclear Information System (INIS)

Equillor, H.E.; Campos, J.M.

2011-01-01

Determination of actinides by alpha spectrometry is usually carried out after full separation of each of the components of the sample. The procedure presented in this paper permits U and Pu isotopes to be measured together allowing faster sample processing and measurement. The method consists in the extraction with tributyl phosphate of U and Pu isotopes from the rest of the matrix, followed by a cathodic electrodeposition to obtain alpha spectrometry suitable pieces. It can be applied to various environmental samples, such as water, filters and soil (about 0.5 g of solid sample for the described conditions). High-quality electroplated discs are essential for simultaneous processing, so a technique to achieve this requirement is also explained. (authors) [es

The analysis of uranium in environmental sample by mass spectrometer combined with isotopic dilution

International Nuclear Information System (INIS)

Fu Zhonghua; Jia Baoting; Han Jun

2003-01-01

Uranium in the environmental sample was analyzed by mass spectrometer combined with isotopic dilution. Before mass spectrometer analysis, samples were dissolved in a concentrated acidic solution containing HNO 3 , HF and HClO 4 and chemically processed to suit the analysis requirement. Analysis results indicated that the uranium content was 0.08 μg/g in river water, 0.1 μg/g in evergreen foliage, and 5-11 μg/g in surface soil respectively. (authors)

Statistical Classification Of the Environmental Isotopes and the Hydrochemical data in the main Shallow Coastal Aquifer System in North West, Egypt

International Nuclear Information System (INIS)

Nada, A.A.; AL-Gamal, S.A.

1999-01-01

Multivariate statistical analysis of hydrochemical data and environmental isotopes were used in differentiating ground waters of different types within the quaternary aquifer in the north western coast of Egypt. Three main groups of water types were differentiated, in close agreement with three isotopic water groups, based on field and laboratory studies. The first group includes the sodium bicarbonate water type of meteoric origin (cluster 1 in multivariate analysis and isotopic water group 1) whereas, the second group includes both sodium chloride and sodium sulphate waters.(cluster in multivariate analysis and isotopic group 2). The third group represents ground water of salt water intrusion whose water type is sodium chloride (cluster 111 and isotopic water groups 3) .The data show that salinity ranges from 385 mg/L representing very fresh water to 12260 mg/L representing water contaminated with marine water due to excessive pumping in some Localities.

Natural isotopes

International Nuclear Information System (INIS)

Vogel, J.C.

1986-01-01

14 C dates between 600 and 900 AD were obtained for early Iron Age sites in Natal, and from 1300 to 1450 AD for rock engraving sites in Bushmanland. Palaeoenvironmental data derived from the dating of samples related to sedimentary and geomorphic features in the central and northern Namib Desert enabled the production of a tentative graph for the changes in humidity in the region over the past 40000 years. These results suggest that relatively humid conditions came to an end in the Namib at ±25000 BP (before present). The increased precision of the SIRA mass spectrometer enabled the remeasurement of 13 C and 18 O in the Cango stalagmite. This data confirmed that the environmental temperatures in the Southern Cape remained constant to within ±1 o C during the past 5500 years. Techniques and applications for environmental isotopes in hydrology were developed to determine the origin and movement of ground water. Isotopic fractionation effects in light elements in nature were investigated. The 15 N/ 14 N ratio in bones of animals and humans increases in proportion to the aridity of the environment. This suggests that 15 N in bone from dated archaeological sites could be used to detect changes in past climatic conditions as naturally formed nitrate minerals are higly soluble and are only preserved in special, very dry environments. The sources and sinks of CO 2 on the South African subcontinent were also determined. The 13 C/ 12 C ratios of air CO 2 obtained suggest that the vegetation provides the major proportion of respired CO 2 . 9 refs., 1 fig

Surface Water Interactions using Environmental Isotopes

Indian Academy of Sciences (India)

40

totally destroyed the karst landscape causing modification of drainage and ... Due to lack in effective attenuation mechanisms in karst systems, the ..... Stable isotopes in precipitation of the study area (rainwater and fresh snow) showed a wide.

Estimated values of the environmental tritium concentration and the altitude isotope effects of δD and δ18O in Hokkaido

International Nuclear Information System (INIS)

Ikeda, Mitsuyoshi; Takata, Sigeru; Matsueda, Hiroharu

1998-01-01

Tritium ( 3 H) concentration and stable isotopic ratios δD and δ 18 O are important environmental tracer data. In Hokkaido, however, hydrological studies using these data were difficult due to a lack of environmental tritium and the altitude isotope effect values. In this study, 3 H concentrations of Hokkaido wine were measured to estimate the past rain 3 H concentrations. In addition, environmental δD and δ 18 O samples taken on Mt. Daisetsuzan, the highest peak in Hokkaido, and in the Tokachi Plain were measured. The results obtained are as follows: Estimated concentrations of 3 H in Hokkaido were higher than those in Tokyo and Tsukuba, and were consistent with geographical 3 H levels in rain around Hokkaido. Some model calculations suggested that the 3 H concentrations in the 1950's and 1960's were at least 30% higher than those in Tokyo. The altitude isotope effects obtained were -1.75±0.30 per mille/100 m and -0.24±0.01 per mille/100 m for δD and δ 18 O, respectively. These values are almost the same as, or slightly lower than those in the Chubu and Tohoku districts. Using these data, the approximate age of groundwater and the altitude of original precipitation could be estimated. (author)

Isotope dilution and sampling factors of the quality assurance and TQM of environmental analysis

International Nuclear Information System (INIS)

Macasek, F.

1999-01-01

Sampling and preparatory treatment of environmental objects is discussed from the view of their information content, functional speciation of the pollutant, statistical distribution treatment and uncertainty assessment. During homogenization of large samples, a substantial information may be lost and validity of environmental information becomes vague. Isotope dilution analysis is discussed as the most valuable tool for both validity of analysis and evaluation of samples variance. Data collection for a non-parametric statistical treatment of series of 'non-representative' sub-samples, and physico-chemical speciation of analyte may actually better fulfill criteria of similarity and representativeness. Large samples are often required due to detection limits of analysis, but the representativeness of environmental samples should by understood not only by the mean analyte concentration, but also by its spatial and time variance. Hence, heuristic analytical scenarios and interpretation of results must be designed by cooperation of environmentalists and analytical chemists. (author)

Agronomic evaluation of guano sources by means of isotope techniques

International Nuclear Information System (INIS)

Zapata, F.; Arrillaga, J.L.

2002-01-01

Many soils of the tropics and subtropics under continuous cultivation are very infertile, thus poor yields are obtained and little crop residues remain to protect the soils from degrading erosion. External nutrient inputs in the form of chemical fertilizers, organic materials and other nutrients sources are essential for developing sustainable agricultural production systems. As chemical fertilizers are costly for developing countries with insufficient foreign currency for their purchase and their supplies are limited and irregular for small landholders, alternative nutrient sources must be sought and evaluated for use in dominant agricultural production systems. Locally available organic materials of different origin are potential sources of nutrients. One such source with high agronomic potential is guano. The present study was carried out to evaluate the agronomic effectiveness of two guano materials of different origin (Zaire and Peru) as sources of nitrogen and phosphorus as compared to chemical fertilizers (ammonium sulfate and triple superphosphate) using isotopic ( 15 N and 32 P) techniques. Using the classical method of comparing dry matter weight and P uptake, no significant differences among the tested guano sources were found. The use of the isotopic techniques allowed a quantitative assessment of the N and P supply to crops. Both guano materials were found to be good sources of N but in contrast were poor sources of phosphorus. In addition, from the agronomic evaluation, it was found that the guano of Zaire and the ammonium sulfate were N sources of equivalent efficiency and the guano of Peru even slightly better than the ammonium sulfate. As expected, P in the single superphosphate was as available to the P in the triple superphosphate. However, the substitution ratios for the guano sources were relatively high. Thus, 1 kg P as single superphosphate was equivalent to 9.5 kg P as guano from Zaire or 12.5 kg P as guano from Peru. Further field trials in

Application of Stable Isotope-Assisted Metabolomics for Cell Metabolism Studies

Science.gov (United States)

You, Le; Zhang, Baichen; Tang, Yinjie J.

2014-01-01

The applications of stable isotopes in metabolomics have facilitated the study of cell metabolisms. Stable isotope-assisted metabolomics requires: (1) properly designed tracer experiments; (2) stringent sampling and quenching protocols to minimize isotopic alternations; (3) efficient metabolite separations; (4) high resolution mass spectrometry to resolve overlapping peaks and background noises; and (5) data analysis methods and databases to decipher isotopic clusters over a broad m/z range (mass-to-charge ratio). This paper overviews mass spectrometry based techniques for precise determination of metabolites and their isotopologues. It also discusses applications of isotopic approaches to track substrate utilization, identify unknown metabolites and their chemical formulas, measure metabolite concentrations, determine putative metabolic pathways, and investigate microbial community populations and their carbon assimilation patterns. In addition, 13C-metabolite fingerprinting and metabolic models can be integrated to quantify carbon fluxes (enzyme reaction rates). The fluxome, in combination with other “omics” analyses, may give systems-level insights into regulatory mechanisms underlying gene functions. More importantly, 13C-tracer experiments significantly improve the potential of low-resolution gas chromatography-mass spectrometry (GC-MS) for broad-scope metabolism studies. We foresee the isotope-assisted metabolomics to be an indispensable tool in industrial biotechnology, environmental microbiology, and medical research. PMID:24957020

Stable isotopic data for inferring source of groundwater recharge in the Anekal Taluk, Karnataka

International Nuclear Information System (INIS)

Ansari, Md. Arzoo; Deodhar, Archana; Jaryal, Ajay; Mendhekar, G.N.; Sinha, U.K.; Dash, Ashutosh; Davis, Deljo

2015-01-01

Occurrence of groundwater mainly depends on recharge area characteristics such as slope of the topography, surface cover characteristics, geology of the area and the permeability of top soil etc. Most of the tube wells located in the study area are in unconfined aquifer and the hydrology of them is mainly influenced by rainfall and surrounding catchments area characteristics. Isotope techniques provide a unique tool for establishing the recharge areas of groundwater. The stable Isotopes of O and H in water behave chemically conservative below 60 - 80°C and their concentrations are not affected by geochemical reactions in normal aquifers. Therefore, groundwater preserves its isotopic fingerprint, reflecting the history and origin before infiltration. This makes it an useful tool to interpret recharge mechanisms and the flow system. Therefore, an isotope hydrological technique has been applied in Anekal (12 deg 47 min 44 sec N; 77 deg 41 min 29 sec E) to identify the groundwater recharge area. Groundwater samples were collected from the study areas and analyzed for environmental Isotope (δ 2 H, δ 18 O) by a Isotope ratio mass spectrometer (IsoPrime-100) using gas equilibration method. Physico-chemical parameters (Temperature, EC, pH) were measured insitu. Electrical conductivity (EC) of the groundwater ranges from 668 to 2139 μS/cm, which is dependent on their travel path and the associated rock-water interaction (dissolution of rock minerals)

Production and chemical isolation procedure of positron-emitting isotopes of arsenic for environmental and medical applications

Science.gov (United States)

Ellison, P. A.; Barnhart, T. E.; Engle, J. W.; Nickles, R. J.; DeJesus, O. T.

2012-12-01

The positron-emitting isotopes of arsenic have unique potential for imaging research in medical and environmental applications. The production and purification of radioarsenic from proton-irradiated natural GeO2 targets is reported. The separation procedure utilizes precipitation and anion exchange separation steps. Two anion exchange procedures were investigated. An overall arsenic decay-corrected separation yield of 80% was obtained.

The analysis study of plutonium in the environmental sample by mass spectrum combined with isotopic dilution

International Nuclear Information System (INIS)

Han Jun; Fu Zhonghua; Mao Xingen; Meng Fanben

2004-01-01

The technology of the rhenium filament carbonization was used to increase the ionization efficiency in this paper. The plutonium in the environmental sample was analyzed by Mass Spectrum combined with isotope dilution. Analysis of the 239 Pu blank in the process: The analysis of 239 Pu from the chemical process was carried out in order to establish the influence of the 239 Pu introduced from the process. The analysis results were shown in Table 1 sample 1 was not gone through the process, sample 2 and sample 3 were gone through the process. It was clear that there was no influence of the 239 Pu from the process within the deviation. Results and Discussions: The environmental samples which were dealed with the chemical method were prepared the sample of mass spectrum, The atomic ratio of the 239 Pu and 242 Pu in the environmental samples was measured by Mass Spectrum. The atomic ratio in the tracer 242 Pu was 0.01476±0.00007.The results for nuclide content in environment were given in Table 2. The content of 239 Pu in the tracer was high, so the existing of 239 Pu in the environmental samples can be determined by the changing of the atomic ratio of 242 Pu to 239 Pu. It was clear that there was 239 Pu in the environmental samples except the cypress leaves-2 and the pine leaves-3 within the deviation, and the content of 239 Pu were given in Table 2. Conclusion: a. Plutonium was separated and purified from the impurity by the anion-exchange and the electrodeposition, it was possible to provide the eligible mass spectrum sample. b. The measurement of plutonium in the environmental samples was not influenced by the flow of the background in the experiment. c. As the technology of the rhenium carbonization was used to increase the ionization efficiency, the content of plutonium which was about 10 -13 g in the environmental sample could be quantitatively analyzed by Mass Spectrum combined with isotope dilution. (authors)

Emerging techniques in vegetable oil analysis using stable isotope ratio mass spectrometry

Directory of Open Access Journals (Sweden)

Rhodes, Christopher

2002-03-01

Full Text Available As the practice of vegetable oil adulteration becomes more sophisticated, the possibility to subvert detection using established techniques such as capillary gas chromatography is increasing. One of the most powerful techniques to be used in food authenticity studies is stable isotope ratio mass spectrometry (SIRMS which utilises differences in the natural abundance of the stable isotopes of the ‘light’ bio-elements hydrogen, nitrogen, carbon, oxygen and sulfur to detect food fraud. SIRMS has found application in the authentication of a wide range of foodstuffs, including fruit juices, wines, spirits, honey and to detect the adulteration of flavour compounds with synthetic analogues. This papers reviews the current state-of-the-art for the authentication of vegetable oils using SIRMS and highlights emergent techniques such as compound- and position specific-isotope mass spectrometry. These latter developments offer the potential to provide more rapid and improved detection of the economic adulteration of vegetable oils.A medida que la práctica de la adulteración de aceites vegetales se hace más sofisticada, las posibilidades de evitar la detección utilizando técnicas tradicionales como la cromatografía de gases en columna capilar aumentan. Una de las técnicas más poderosas que más se utilizan en los estudios de autentificación de alimentos es la espectrometría de masas de relaciones isotópicas, que utiliza diferencias en la abundancia natural de isótopos estables de elementos ligeros biológicos hidrógeno, nitrógeno, carbón, oxigeno y azufre para detectar fraude en los alimentos. La espectrometría de masas de relaciones isotópicas ha encontrado aplicación en la autentificación de una amplia gama de alimentos, incluyendo zumos de frutas, vinos, bebidas alcohólicas de alta graduación, miel, y en la detección de la adulteración de los compuestos aromáticos con sus análogos de origen sintético. Este trabajo

The combined use of micro-hydropyrolysis and compound-specific isotope analysis (CSIA) as a novel technique to identify coal-derived biodegraded PAH flux in the complex environment

Energy Technology Data Exchange (ETDEWEB)

Cheng-Gong Sun; Gbolagade Olalere; Wisdom Ivwurie; Mick Cooper; Colin Snape [University of Nottingham, Nottingham (United Kingdom). Nottingham Fuel and Energy Centre

2007-07-01

A novel analytical methodology combining CSIA and micro-hydropyrolysis (CSIA/micro-HyPy) has been developed to aid unambiguous source apportionment of PAHs in the complex environment where PAH matrices have been heavily biodegraded and/or their isotopic signatures are overlapping for some sources. Asphaltenes retain useful information of biogeochemical significance, which can be accessed via hydropyrolysis. The PAHs released from hydropyrolysis of asphaltenes, the bound PAHs, from different primary sources (e.g. crude oils, low and high temperature coal tars) were characterized and compared to free aromatics in regard to their molecular and 13C-isotopic profiles. It was found that hydropyrolysis of asphaltenes can generate molecular and isotopic profiles highly representative of their primary sources. For both low and high temperature coal tar, the bound aromatics have broadly similar molecular distributions to their free aromatic counterparts and have {sup 13}C-isotopic values almost identical to those of UK bituminous coals(-23{per_thousand}), indicating that the asphaltenes are actually released as representative fragments of coal structures during carbonization. As expected, the bound aromatics are more 13C-enriched by 1-3 {per_thousand} (-21 to -23{per_thousand}) compared to free aromatics (-24 to -26{per_thousand}). No significant isotopic difference was observed between free and bound aromatics for a North Sea crude oil, all having similar {sup 13}C-isotopic values (-27.2-30.2 {per_thousand}) that are significantly lighter than those for coal-derived aromatics. Applications of this novel methodological CSIA/micro-HyPy technique to samples previously examined from an area around a former carbonization plant have been successfully demonstrated where unambiguous source apportionment could not be achieved previously for the PAHs due to likely environmental alternation. 3 refs., 2 figs., 2 tabs.

Isotope analysis of micro metal particles by adopting laser-ablation mass spectrometry

International Nuclear Information System (INIS)

Song, Kyu Seok; Ha, Young Kyung; Han, Sun Ho; Park, Yong Joon; Kim, Won Ho

2005-01-01

The isotope analysis of microparticles in environmental samples as well as laboratory samples is an important task. A special concern is necessary in particle analysis of swipe samples. Micro particles are normally analyzed either by dissolving particles in the solvents and adopting conventional analytical methods or direct analysis method such as a laser-ablation ICP mass spectrometry (LA-ICP-MS), SIMS, and SNMS (sputtered neutral mass spectrometry). But the LA-ICPMS uses large amount of samples because normally laser beam is tightly focused on the target particle for the complete ablation. The SIMS and SNMS utilize ion beams for the generation of sample ions from the particle. But the number of ions generated by an ion beam is less than 5% of the total generated particles in SIMS. The SNMS is also an excellent analytical technique for particle analysis, however, ion beam and frequency tunable laser system are required for the analysis. Recently a direct analysis of elements as well as isotopes by using laser-ablation is recognized one of the most efficient detection technology for particle samples. The laser-ablation mass spectrometry requires only one laser source without frequency tuneability with no sample pretreatment. Therefore this technique is one of the simplest analysis techniques for solid samples as well as particles. In this study as a part of the development of the new isotope analysis techniques for particles samples, a direct laser-ablation is adopted with mass spectrometry. Zinc and gadolinium were chosen as target samples, since these elements have isotopes with minor abundance (0.62% for Zn, and 0.2% for Gd). The preliminary result indicates that isotopes of these two elements are analyzed within 10% of natural abundance with good mass resolution by using direct laser-ablation mass spectrometry

Improvement of ground water management and protection through the use of isotope and Nuclear Techniques

International Nuclear Information System (INIS)

El Samad, O.

2009-01-01

To establish nuclear techniques for the study and management of water resources including technology transfer; to develop a national strategy for the use of isotope techniques in water management and development studies; to develop a water mangement framework; to solve problems related to water shortage, overexploitation, management and rapid quality deterioration; to evaluate the sources, recharge rates and renewal of ground water reservoires; to resolve the problems of mixed aquifers, the quantity of mixing and the exchange reactions between groundwater reservoirs and their matrix; to strengthen the role of the CNRS within national instituions and water authorities. (author)

Application of isotopic techniques for study of ground water from karstic areas. 1. Origin of waters

International Nuclear Information System (INIS)

Feurdean, Victor; Feurdean, Lucia

2000-01-01

Environmental stable isotope method was used for study of ground water from karst of NE Dobrogea. Study area is in the vicinity of Danube Delta (declared in 1990 by UNESCO the Reserve of Biosphere) and presents scientific and ecological interest. Measurements of deuterium content of ground water show that waters are meteoric in origin, but at the same time the results showed that the water from two sampling points could not originate from local ground water and have their recharge area at high altitude and a considerable distance. According to the δD values the following categories of waters were established: - waters depleted in deuterium (δD 0 / 00 ) relative to δD values of surface and ground water in the geographic area from which they were collected. They represent most probably the intrusion of isotopically light water from high altitude sites (higher than 1000 m) through network of highly permeable karst channels. The discharge of this component of aquifer occurs both by conduct flow and by diffuse flow; - Waters tributaries to the Danube River (δD > -75 0 / 00 ) that have a small time variability of δD values; - Local infiltration waters, situated in the West side of the investigated area towards the continental platform of the Dobrogea (δD > -70 0 / 00 ). They present high time variability of δD values, due to distinct seasonal effects; - Waters originated in mixing processes between the waters with different isotopic content. The endmember one is heavier isotopic water that belongs to local recharged waters (local infiltration waters and waters tributary to Danube river) while the other endmember is the isotopically light water. (authors)

Preparation, characterization and certification of uranium isotope reference materials

International Nuclear Information System (INIS)

Oliveira Junior, Olivio Pereira de

2006-01-01

This work describes the preparation, characterization and certification of a set of uranium isotope reference materials ranging from 0.5 to 20.0 % of 235 U in mass. The most important concepts of metrology in chemical measurements were applied so that the certified quantities in these materials could be directly traceable to the International System of Units (SI). As a consequence of this approach, these materials can be used in the instruments calibration, estimation of measurement uncertainty, method validation, assessment of performance of analysts, quality control routines and interlaboratory comparison programmes. The most advanced methods and techniques in mass spectrometry, that is, gas source mass spectrometry (GSMS), thermal ionisation mass spectrometry (TIMS) and inductively coupled plasma mass spectrometry (ICPMS) were investigated to identify which are the dominant components in the uncertainty and to quantify its contribution to the final value of the measurement uncertainty of the isotopic ratio. The results obtained were then compared to verify which are the methods and techniques associated to the lowest measurement uncertainty values. The isotope amount ratio n( 235 U)/n( 238 U) was certified in the materials produced to expanded uncertainties ranging from 0.02 to 0.10 % and the ratios n( 234 U)/n( 238 U) and n( 236 U)/n( 238 U), to uncertainties ranging from 0.03 to 2.20 %. These values fully comply to the requirements of the isotopic characterization of nuclear fuel as well as the analysis of environmental samples for nuclear safeguards. (author)

Use of Isotopic Techniques for the Assessment of Hydrological Processes in Wetlands (Cienaga Colombia)

Energy Technology Data Exchange (ETDEWEB)

Betancur, T.; Santa, D.; Palacio, P.; Palacio, C.; Wills, B.; Hoyos, D. A. [Universidad de Antioquia, Medellin (Colombia)

2013-07-15

The Cienaga Colombia wetland is located in the Bajo Cauca Antioqueno region where the 'Man' river flows into the Cauca River. Hydrological processes on the Cienaga Colombia wetland are complex because of the interactive effects of both local and regional elements, associated with a typical tropical wet climatic regime. In this groundwater dependent wetland hydrological studies have been conducted, including hydrochemical analyses and isotope tracers, to describe and understand the interactions between groundwater and surface water, not only for the wetland itself but also for the entire catchment area. Rain samples (five year record) were used to obtain the LML: {delta}{sup 2}H = 8.03 {delta}{sup 18}O +9.9. The evaporation line is: {delta}{sup 2}H = 5.9 {delta}{sup 18}O - 7.3. According to the analyses, both groundwater and surface waters have the same isotopic signatures. Unsustainable land use practices along with current and predicted global environmental changes may cause negative impacts on the hydrological functioning of the region, affecting primarily, but not exclusively, evapotranspiration-recharge processes and the sustainability of the entire system. (author)

The relation of plasma octopamine to hepatic encephalopathy studied with stable isotope dilution technique

International Nuclear Information System (INIS)

Zhang Jianhua

1992-01-01

In order to investigate the relationship between octopamine and hepatic encephalopathy, plasma octopamine content of normal adults and hepatic patients (compensated or de-compensated cirrhotic, patients with encephalopathy) were determined with isotope dilution and GCMS technique, 200 ng of [1, 1-D]-octopamine was added to each sample as internal standard. After the de-proteinized plasma was subjected to cation exchange chromatography, the amine fraction was derivatized with PFP and analyzed with GCMS using the selected ion monitoring technique. The result showed that the level of plasma octopamine was significantly elevated in patients with encephalopathy. Since this method is sensitive and specific, it is readily applicable to the analysis of a few nano grams of octopamine

The isotopic composition of valves and organic tissue of diatoms grown in steady state cultures under varying conditions of temperature, light and nutrients. Implications for the interpretation of oxygen isotopes from sedimentary biogenic opal as proxies of environmental variations

Energy Technology Data Exchange (ETDEWEB)

Kowalczyk, K

2006-05-15

The oxygen isotopes of diatomaceous silica from marine and freshwater sediments are frequently used as indicators of the palaeotemperature development, particularly in cases where calcareous microfossils are rare or absent. With regard to terrestrial waters it is unknown whether or not palaeotemperature scale can be used in a limnic ecosystem. Due to the fact that the seasonal variations in lakes are larger than in oceans, specific problems arise when working with freshwater sediments. Thus, an understanding of the contribution of the various factors (e.g. temperature, light nutrients, competition) influencing the formation of isotope signals in biogenic opal is a prerequisite for the accurate interpretation of environmental processes. Since it is impossible to examine the influence of a single parameter under natural ecosystem conditions due to permanent changes of the environment, laboratory experiments with single diatom species are needed. Therefore, the aim of this study was to investigate the correlation between the oxygen isotope variations in biogenic opal and different environmental parameters using steady state cultures with diatoms. It should be examined whether or not the different diatom species grown under identical conditions show equal oxygen isotope ratios (species relationship), if variations of the water temperature induce variations of the oxygen isotope ratio (relationship with temperature), variable parameters such as light intensity and nitrate concentration influence the isotope ratio, and if vital effects (e.g. growth rate) lead to variations of the oxygen isotope ratio. (orig.)

The isotopic composition of valves and organic tissue of diatoms grown in steady state cultures under varying conditions of temperature, light and nutrients. Implications for the interpretation of oxygen isotopes from sedimentary biogenic opal as proxies of environmental variations

International Nuclear Information System (INIS)

Kowalczyk, K.

2006-05-01

The oxygen isotopes of diatomaceous silica from marine and freshwater sediments are frequently used as indicators of the palaeotemperature development, particularly in cases where calcareous microfossils are rare or absent. With regard to terrestrial waters it is unknown whether or not palaeotemperature scale can be used in a limnic ecosystem. Due to the fact that the seasonal variations in lakes are larger than in oceans, specific problems arise when working with freshwater sediments. Thus, an understanding of the contribution of the various factors (e.g. temperature, light nutrients, competition) influencing the formation of isotope signals in biogenic opal is a prerequisite for the accurate interpretation of environmental processes. Since it is impossible to examine the influence of a single parameter under natural ecosystem conditions due to permanent changes of the environment, laboratory experiments with single diatom species are needed. Therefore, the aim of this study was to investigate the correlation between the oxygen isotope variations in biogenic opal and different environmental parameters using steady state cultures with diatoms. It should be examined whether or not the different diatom species grown under identical conditions show equal oxygen isotope ratios (species relationship), if variations of the water temperature induce variations of the oxygen isotope ratio (relationship with temperature), variable parameters such as light intensity and nitrate concentration influence the isotope ratio, and if vital effects (e.g. growth rate) lead to variations of the oxygen isotope ratio. (orig.)

Determination of the activity of the uranium isotopes U-234, U-235 and U-238 in environmental samples by alpha spectrometry

International Nuclear Information System (INIS)

Kromphorn, G.

1996-02-01

Different materials containing urandium are regularly investigated in the Laboratory for Environmental Radioactivity of the Physikalisch-Technische Bundesanstalt (PTB) with respect to the activity of the uranium isotopes ( 234 U, 235 U, and 238 U). Moreover for reasons of quality assurance, the PTB takes part in international comparisons where also uranium contents are to be determined in environmental samples and in the framework of which reference materials can be certified. Finally in national comparisons the PTB has the task to determine values of the specific activity for the different isotopes which can play the role of nominal (orientation) values. The single steps of uranium analyses are described after a compilation of the most important data of the uranium isotopes contained in natural uranium: The use of 232 U as tracer, the chemical separation analytics, the production of α-sources and the measuring methods. Analyses of a soil sample and a waste water sample with respect to their specific uranium activity have been chosen as examples of a practical application. (orig.) [de

Development of isotope hydrology technology in China

International Nuclear Information System (INIS)

Li Zhangsu

1988-01-01

The development of isotope hydrology technology in China is described. The isotope technology provides an independent approach for solving hydrological problems. Isotope hydrology is applied in three ways: the use of change in environmental isotopic composition of water (especially used in water resources exploitation), the use of artificial radioactive tracers and the use of redioisotope instruments. Many important achievements have been obtained in application of isotopic hydrology technology. For the sake of promoting rapid development of isotope hydrology the topics on management, technology and others are commented

Studying The Contamination Status And The Sources Of Nitrogen Compounds In Groundwater In Ho Chi Minh City Area Using The Isotope Hydrology Techniques

International Nuclear Information System (INIS)

Nguyen Kien Chinh; Le Danh Chuan; Nguyen Van Nhien; Huynh Long; Tran Bich Lien; Luong Thu Tra

2013-01-01

The obtained data on nitrate, ammonium and total nitrogen concentration of 100 groundwater samples collected from 3 main aquifers show that although the nitrate concentration is still lower than the authorized limit of this compound in groundwater but the concentration and, specially the distribution of nitrate in shallow aquifer (Pleistocene) shows the increasing tendency in pollution level while ammonium and also total nitrogen content exceeded the authorized limit of these compounds in groundwater. For deeper aquifers (Upper and Lower Pliocene) groundwater is less polluted by nitrogen compounds. Analysis data on isotopic composition δ 15 N and δ 18 O of nitrate of the collected groundwater samples in compiling with other environmental isotopes data as δ 2 H, δ 18 O of water and natural radioactive isotopes in groundwater ( 3 H and 14 C) show that nitrate in Pleistocene groundwater is derived from both sources, geogenic source such as organic matter buried in aquifer soil layers and anthropogenic source like fertilizers, manure and septic wastes with the dominance of anthropogenic source. At the same time, obtained isotopic data proved the geogenic source of nitrate in water of the deeper aquifers. Study results on infiltration rate and infiltration depth of fertilizers and water using tracer techniques in the zone specializing in legume cultivation of the study area show the possible infiltration into shallow groundwater of water and also fertilizers. The obtained results prove the need of better management of the use of fertilizers for cultivation activities in the study area and to apply the advanced cultural manners for minimizing amount of fertilizers used. At the same time to strengthen wastes management and treatment in whole study area, especially in the zones which intake rain water as a recharge source to shallow groundwater such as Cu Chi, Hoc Mon and also inner city districts. (author)

Applications of nuclear technique in environmental and medical science

International Nuclear Information System (INIS)

Shi Xianfeng; Shen Hao; Liu Bo; Sun Minde; Yao Huiying; Zhou Shijun; Mi Yong

2001-01-01

The serious environmental pollution problem and application of the nuclear technique in environmental and medical sciences were discussed. The analysed results of the elemental distribution of particles in automobile exhaust, the aerosol particle of different size and the effect of Rare Earth on cells were reported. The authors can obtain some information related to element concentration. It offers a convenient method in inspecting the environmental pollution

Application of heavy stable isotopes in forensic isotope geochemistry: A review

International Nuclear Information System (INIS)

Aggarwal, Jugdeep; Habicht-Mauche, Judith; Juarez, Chelsey

2008-01-01

Light stable isotopes have been used for many years to characterize the source and transport of materials. More recently heavy isotope systems such as Sr, Nd and Pb have been added to this list in order to aid source identification. With the advent of multiple collector ICP-MS, the range of isotopic tools now available has increased considerably, however, until the isotope systematics of these new non-traditional isotope systems have become better understood, they will not be as useful in characterizing material source and transportation. Applications using heavy metal stable isotopes (mostly traditional heavy isotopes) have reached most avenues in science, including earth sciences, archaeology, anthropology, animal physiology, ecology and toxicology. This field will continue to grow as new applications are developed and techniques become simpler and quicker. This paper provides a review of how this field has grown and presents two new applications using Pb and Sr isotopes in glazes to determine the source of ore used in glazes, and using Sr isotopes to determine the origin of undocumented deceased Mexican border crossers

Application of heavy stable isotopes in forensic isotope geochemistry: A review

Energy Technology Data Exchange (ETDEWEB)

Aggarwal, Jugdeep [W.M. Keck Isotope Laboratory, Department of Earth Sciences, University of California, Santa Cruz, CA 95064 (United States)], E-mail: jaggarwal@pmc.ucsc.edu; Habicht-Mauche, Judith; Juarez, Chelsey [Department of Anthropology, University of California, Santa Cruz, CA 95064 (United States)

2008-09-15

Light stable isotopes have been used for many years to characterize the source and transport of materials. More recently heavy isotope systems such as Sr, Nd and Pb have been added to this list in order to aid source identification. With the advent of multiple collector ICP-MS, the range of isotopic tools now available has increased considerably, however, until the isotope systematics of these new non-traditional isotope systems have become better understood, they will not be as useful in characterizing material source and transportation. Applications using heavy metal stable isotopes (mostly traditional heavy isotopes) have reached most avenues in science, including earth sciences, archaeology, anthropology, animal physiology, ecology and toxicology. This field will continue to grow as new applications are developed and techniques become simpler and quicker. This paper provides a review of how this field has grown and presents two new applications using Pb and Sr isotopes in glazes to determine the source of ore used in glazes, and using Sr isotopes to determine the origin of undocumented deceased Mexican border crossers.

Co-ordinated research project on application of isotopic and nuclear techniques in the study of nutrition-pollution interactions and their impact on the nutritional status of human subjects in developing country populations. Report on the 2. research co-ordination meeting

International Nuclear Information System (INIS)

2004-01-01

The International Atomic Energy Agency (IAEA) is actively contributing through coordinated research project mechanisms to the development of isotopic techniques applicable for pollution-nutrition interactions. This CRP is based on the recommendations of a consultants' meeting on: 'Nuclear Analytical and Isotope Techniques for assessing nutrition-pollution interactions', NAHRES-62. The main objective of the CRP is to provide a scientific basis for better assessment of selected pollutants and nutrients in biological samples with a view to elucidate their interactions and the impact on human health. Results of this study will enhance the existing body of knowledge on nutrition-pollution interactions mechanisms and can be used to develop preventive strategies. SPECIFIC OBJECTIVES: Use of non-invasive specimens (e.g. breast milk, blood, hair, urine, placenta, eventually adipose tissue for organic pollutants) as indicators to monitor the interaction between the environmental pollution (both organic and inorganic) and nutritional status. Development of protocols to assess the health impact of environmental conditions on populations living under the risk of malnutrition. Validated procedures for chemical analysis in selected environment and nutritional specimens for research in the pollutant-nutrition interaction

Study on bioavailability of dietary iron of women by using activable isotopic tracer and neutron activation analysis techniques

International Nuclear Information System (INIS)

Zhang Yangmei; Ni Bangfa; Tian Weizhi; Wang Pingsheng; Cao Lei

2002-01-01

The bioavailability of diet iron of 10 healthy young women in Beijing area is studied by using two enriched isotopes 54 Fe and 58 Fe, and neutron activation analysis techniques. The abundance of 54 Fe and 58 Fe is 61.4% and 23.4%, respectively. In additional, the atomic absorption spectrometry is employed to measure total iron in fecal samples. Dysprosium, rarely absorbed by human body, is used to monitor the residence time of tracer isotopes in order to collect the fecal samples completely. The results show that the bioavailability of dietary iron in young women is (14.9 +- 3.9)%

Methods of clinical chemistry and isotopic technique for investigation of the nitrogen metabolism in man using 15N

International Nuclear Information System (INIS)

Faust, H.; Bornhak, H.; Hirschberg, K.; Jung, K.; Junghans, P.; Krumbiegel, P.; Reinhardt, R.

1981-03-01

The present manual is a catalogue of methods representing theoretical and practical aspects of application of the stable isotope 15 N in medicine as well as a reference book for users of 15 N techniques in life sciences. Special emphasis is given to the planning of 15 N tracer experiments and their interpretation, sources of error and standard values of nitrogen compounds, information on sampling of medical materials, methods of separation and determination of proteins and non-protein nitrogen compounds in serum and urine, and details of the isotopic analysis of nitrogen by emission and mass spectrometry. (author)

Isotope hydrology. Raigon aquifer hydrochemistry - Uruguay

International Nuclear Information System (INIS)

Plata Bedmar, A.; Dellepere, A.; Roma, M.T; Ramirez, M.; Garat, S.; Padros, D.; Caristo, R.; Lavanca, R.; Aranda, E.; Michelis, G.; Monroi, F.; Luaces, A.

2001-01-01

The purpose of this study is the Raigon Acuifer investigation by isotopic techniques as well as the dynamic behavior in the water resources. These techniques are based on the natural water isotope deuterium, oxygen-18, tritium and carbon-14 measurement. The hydrochemistry is used like a complementary tool

Characterization of the sedimentary organic matter preserved in Messel oil shale by bulk geochemistry and stable isotopes

NARCIS (Netherlands)

Bauersachs, T.; Schouten, S.; Schwark, L.

2014-01-01

We investigated a 150 m thick drill core section of Messel oil shale using bulk geochemical and stable isotope techniques in order to determine the organic matter sources and the environmental conditions that prevailed during the deposition of the lacustrine sequence. High Corg values (on average

Vitamin A equivalency of beta-carotene in healthy adults: limitation of the extrinsic dual-isotope dilution technique to measure matrix effect.

NARCIS (Netherlands)

Loo-Bouwman, C.A. Van; West, C.E.; Breemen, R.B. van; Zhu, D.; Siebelink, E.; Versloot, P.; Hulshof, P.J.; Lieshout, M. van; Russel, F.G.M.; Schaafsma, G.; Naber, A.H.J.

2009-01-01

Data on the vitamin A equivalency of beta-carotene in food are inconsistent. We quantified the vitamin A equivalency (microg) of beta-carotene in two diets using the dual-isotope dilution technique and the oral-faecal balance technique. A diet-controlled, cross-over intervention study was conducted

Validation of a simple isotopic technique for the measurement of global and separated renal function

International Nuclear Information System (INIS)

Chachati, A.; Meyers, A.; Rigo, P.; Godon, J.P.

1986-01-01

Schlegel and Gates described an isotopic method for the measurement of global and separated glomerular filtration rate (GFR) and effective renal plasma flow (ERPF) based on the determination by scintillation camera of the fraction of the injected dose (99mTc-DTPA-[ 131 I]hippuran) present in the kidneys 1-3 min after its administration. This method requires counting of the injected dose and attenuation correction, but no blood or urine sampling. We validated this technique by the simultaneous infusion of inulin and para-amino hippuric acid (PAH) in patients with various levels of renal function (anuric to normal). To better define individual renal function we studied 9 kidneys in patients either nephrectomized or with a nephrostomy enabling separated function measurement. A good correlation between inulin, PAH clearance, and isotopic GFR-ERPF measurement for both global and separate renal function was observed

Isotopic separation

International Nuclear Information System (INIS)

Chen, C.L.

1982-01-01

A method is described for separating isotopes in which photo-excitation of selected isotope species is used together with the reaction of the excited species with postive ions of predetermined ionization energy, other excited species, or free electrons to produce ions or ion fragments of the selected species. Ions and electrons are produced by an electrical discharge, and separation is achieved through radial ambipolar diffusion, electrostatic techniques, or magnetohydrodynamic methods

Decoding Environmental Processes Using Radioactive Isotopes for the Post-Radioactive Contamination Recovery Assessment

Science.gov (United States)

Yasumiishi, Misa; Nishimura, Taku; Osawa, Kazutoshi; Renschler, Chris

2017-04-01

The continual monitoring of environmental radioactive levels in Fukushima, Japan following the nuclear plant accident in March 2011 provides our society with valuable information in two ways. First, the collected data can be used as an indicator to assess the progress of decontamination efforts. Secondly, the collected data also can be used to understand the behavior of radioactive isotopes in the environment which leads to further understanding of the landform processes. These two aspects are inseparable for us to understand the effects of radioactive contamination in a dynamic environmental system. During the summer of 2016, 27 soil core samples were collected on a farmer's land (rice paddies and forest) in Fukushima, about 20 km northwest of the nuclear plant. Each core was divided into 2.0 - 3.0 cm slices for the Cs-134, Cs-137, and I-131 level measurement. The collected data is being analyzed from multiple perspectives: temporal, spatial, and geophysical. In the forest area, even on the same hillslope, multiple soil types and horizon depths were observed which indicates the challenges in assessing the subsurface radioactive isotope movements. It appears that although highly humic soils show higher or about the same level of radioactivity in the surface layers, as the depth increased, the radioactivity decreased more in those samples compared with more sandy soils. With regard to the direction a slope faces and the sampling altitudes, the correlation between those attributes and radioactivity levels is inconclusive at this moment. The altitude might have affected the fallout level on a single hillslope-basis. However, to determine the correlation, further sampling and the detailed analysis of vegetation and topography might be necessary. Where the surface soil was scraped and new soil was brought in, former rice paddy surface layers did show three-magnitude levels lower of radioactivity in the top layer when compared with forest soils. At the foot of forest

Development of analytical techniques for safeguards environmental samples at JAEA

International Nuclear Information System (INIS)

Sakurai, Satoshi; Magara, Masaaki; Usuda, Shigekazu; Watanabe, Kazuo; Esaka, Fumitaka; Hirayama, Fumio; Lee, Chi-Gyu; Yasuda, Kenichiro; Inagawa, Jun; Suzuki, Daisuke; Iguchi, Kazunari; Kokubu, Yoko S.; Miyamoto, Yutaka; Ohzu, Akira

2007-01-01

JAEA has been developing, under the auspices of the Ministry of Education, Culture, Sports, Science and Technology of Japan, analytical techniques for ultra-trace amounts of nuclear materials in environmental samples in order to contribute to the strengthened safeguards system. Development of essential techniques for bulk and particle analysis, as well as screening, of the environmental swipe samples has been established as ultra-trace analytical methods of uranium and plutonium. In January 2003, JAEA was qualified, including its quality control system, as a member of the JAEA network analytical laboratories for environmental samples. Since 2004, JAEA has conducted the analysis of domestic and the IAEA samples, through which JAEA's analytical capability has been verified and improved. In parallel, advanced techniques have been developed in order to expand the applicability to the samples of various elemental composition and impurities and to improve analytical accuracy and efficiency. This paper summarizes the trace of the technical development in environmental sample analysis at JAEA, and refers to recent trends of research and development in this field. (author)

Calcium Isotope Analysis by Mass Spectrometry

Science.gov (United States)

Boulyga, S.; Richter, S.

2010-12-01

The variations in the isotopic composition of calcium caused by fractionation in heterogeneous systems and by nuclear reactions can provide insight into numerous biological, geological, and cosmic processes, and therefore isotopic analysis finds a wide spectrum of applications in cosmo- and geochemistry, paleoclimatic, nutritional, and biomedical studies. The measurement of calcium isotopic abundances in natural samples has challenged the analysts for more than three decades. Practically all Ca isotopes suffer from significant isobaric interferences, whereas low-abundant isotopes can be particularly affected by neighboring major isotopes. The extent of natural variations of stable isotopes appears to be relatively limited, and highly precise techniques are required to resolve isotopic effects. Isotope fractionation during sample preparation and measurements and instrumental mass bias can significantly exceed small isotope abundance variations in samples, which have to be investigated. Not surprisingly, a TIMS procedure developed by Russell et al. (Russell et al., 1978. Geochim Cosmochim Acta 42: 1075-1090) for Ca isotope measurements was considered as revolutionary for isotopic measurements in general, and that approach is used nowadays (with small modifications) for practically all isotopic systems and with different mass spectrometric techniques. Nevertheless, despite several decades of calcium research and corresponding development of mass spectrometers, the available precision and accuracy is still not always sufficient to achieve the challenging goals. This presentation discusses figures of merits of presently used analytical methods and instrumentation, and attempts to critically assess their limitations. Additionally, the availability of Ca isotope reference materials will be discussed.

Stable isotopic analysis of fossil chironomids as an approach to environmental reconstruction: state of development and future challenges

Directory of Open Access Journals (Sweden)

Oliver Heiri

2012-10-01

Full Text Available Remains of chironomid larvae, especially their strongly sclerotized head capsules, can be found abundantly and well preserved in most lake sediment records. These remains mainly consist of chitin and proteins and, since their chemical composition does not seem to be strongly affected by decompositional processes, they can be used to develop palaeoenvironmental reconstructions based on their stable isotopic composition. Here we review available stable isotope studies based on fossil chironomids and indicate future research necessary to further develop this still relatively new research approach. Efforts to produce stable isotope records based on fossil chironomids have mainly examined the elements H, N, C, and O. They have focussed on (1 developing the methodology for preparing samples for isotopic analysis, (2 laboratory studies cultivating chironomid larvae under controlled conditions to determine the factors affecting their stable isotopic composition, (3 ecosystem-scale studies relating stable isotopic measurements of fossil chironomid assemblages to environmental conditions, and (4 developing first down-core records describing past changes in the stable isotopic composition of chironomid assemblages. These studies have shown that chemical sample pretreatment may affect the isotopic composition for some elements. Laboratory runs suggest that the diet of the larvae influences their stable isotopic composition for H, N, C and O, whereas stable isotopes in the ambient water also strongly influence their oxygen and to a lesser extent hydrogen isotopic composition. These experiments also indicate only minor offsets between the nitrogen and carbon isotopic composition of chironomid soft tissue and the fossilizing head capsules, whereas for hydrogen and oxygen this offset remains to be explored. Though few datasets have been published, the available ecosystem studies and developed down-core sediment records indicate that stable isotopes in

Use of isotopes and geophysical techniques in studying dam leakage-case of the Afamia dams Syria

International Nuclear Information System (INIS)

Kattan, Z.; Naser, R.; Al-Fares, W.; Kadkoy, N.; Sbenati, M.R.; Al-Hilal, M.; Sleman, I.; Al-Ali, A.

2011-08-01

Different techniques such as: hydrochemistry, environmental isotopes, radon and geophysical surveys have been applied all together in investigating the water leakages from the Afamia (A, B and C) dams during the period 2006-2008. Groundwater movement in this area shows the existence of two major discharge cones or sinks in the vicinity of B and C reservoirs. This movement suggests a probable vertical leaking and interconnection between the shallow Neogene aquifer and the deeper Karstified water bearing system of the Upper Cretaceous. Spatial distribution patterns of major ions in the groundwater provided comprehensive arguments for the existence of an active dissolution zone of calcareous rocks at a depth of about 45 m below the land surface, facilitating hence the vertical penetration of stored surface water towards the Cretaceous aquifer. The remarkable contrasts in stable isotope compositions between the depleted and highly enriched waters nearby the B reservoir provide another support for water leaks by vertical penetration beneath or very close to the B dam body. The high radon values in the soils, linearly distributed along some tectonic lineaments, may indicate the usefulness of radon method for tracing and mapping unknown faults. Application of some selected geophysical methods (electromagnetic survey, vertical geoelectric sounding and tomography plates) revealed the presence of alternating lithological heterogeneity between permeable and impermeable layers, which may lead to subhorizontal infiltration through the geological formations of the basin. Vertical leakage which could take place in certain locations via existing faults and karst and fractures that hit the main valley may pass through the dam lake. This structure is most likely causing hydraulic connections between the superficial Neogene deposits and the underlying Cretaceous fractured and permeable carbonates rocks. The presence of clayey and silty zones, mostly of high electrical conductivity

Information from uranium and thorium isotopes recorded in lake bottom sediment - Lake Kawaguchi. Attempt to evaluate environmental changes

International Nuclear Information System (INIS)

Sakaguchi, A.; Yamamoto, M.; Shimizu, T.; Sasaki, K.; Koshimizu, S.

2003-01-01

Lake sediments, as well as ice cores and marine sediments, have been used to reveal past environmental changes caused by both natural and artificial events with local and global scales. Particles in the lake originate from soil and other suspended matter which are carried in from the inflowing water or from direct discharge (lithogenous particles), and they are also formed in the lake as a result of the growth, metabolism and death of plants and animals (autogenous particles). The settling particles contain U and Th isotopes due to lithogenous particles (soil), and adsorbed U to the particles. Thorium has an exceedingly low solubility in water and is very strongly adsorbed onto particles. If we can distinguish these two different components in the mixture of U due to lithogenous particles themselves and adsorption fractions, the former might provide useful information on past environmental changes by natural events, while the latter information on past environmental changes by artificial events. In this paper, we aimed to test the above hypothesis using data on U and Th isotopes of sediment cores (0- ca. 40 cm depth, covering periods of past several hundred years) from 3 points in Lake Kawaguchi of Fuji-Goko in Japan. By using model equation and results obtained from analysis, we distinguished U due to lithogenous and autogenous particles. And these depth profiles were compared with changes in the rainfall during the period of 1933 - 2001. Although the changes in the 238 U/ 232 Th ratios with depth for lithogenous particles and rainfall do not fluctuate synchronously, some parts of depth coincided with each other. The results suggest strongly that variation in the U and Th isotopic ratios separated by model might be helpful in tracing the past environmental changes in regional scale. To check the usefulness of this method, physical and chemical data such as grain size, grain density, water content and biogenic SiO 2 in the sediment will be further compared with the

Techniques and problems in studying intestinal absorption with radioactive isotopes in children

International Nuclear Information System (INIS)

James, W.P.T.; Waterlow, J.C.

1976-01-01

Radioactive isotopes give substantial promise for assisting the study of gastrointestinal absorption in children in that they allow reduction or elimination of the collection of blood, urine and faeces specimens. These operations are particularly difficult and unreliable in infants, on whom greatest interest in paediatric gastroenterology is centred in the tropics. Here intestinal malabsorption is most commonly associated with malnutrition, lactose intolerance, gastroenteritis, parasitic infestation and iron-deficiency anaemia. Two general techniques that have been employed are whole-body counting and analyses of 14 CO 2 exhaled in the breath after the feeding of 14 C-labelled nutrients. The former is advantageous if radionuclides suitable for the test at hand exist; the latter may be hard to interpret because of problems in the distribution and metabolism of the nutrient and intermediary products. Proper selection and understanding of the tests is particularly important in paediatric work, where the use of radioactive tracer techniques is unacceptable merely for the convenience of the investigator. (author)

FAO/IAEA interregional training course on the use of isotope and radiation techniques in studies on soil/plant relationships with emphasis on soil water management

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

The document presents an outline and programme schedule for the FAO/IAEA Inter-regional Training Workshop on the Use of Isotope and Radiation Techniques in Studies on Soil-Plant Relationships held in Vienna, 1 June - 9 July 1993. The major topics include instrumentation and radiometric assay, liquid scintillation counting, isotope techniques in fertilizer use efficiency and nitrogen fixation, crop-soil-water-atmosphere relations. General topics such as plant growth, water requirement and soil erosion processes are also covered

FAO/IAEA interregional training course on the use of isotope and radiation techniques in studies on soil/plant relationships with emphasis on soil water management

International Nuclear Information System (INIS)

1993-01-01

The document presents an outline and programme schedule for the FAO/IAEA Inter-regional Training Workshop on the Use of Isotope and Radiation Techniques in Studies on Soil-Plant Relationships held in Vienna, 1 June - 9 July 1993. The major topics include instrumentation and radiometric assay, liquid scintillation counting, isotope techniques in fertilizer use efficiency and nitrogen fixation, crop-soil-water-atmosphere relations. General topics such as plant growth, water requirement and soil erosion processes are also covered

Determination of plutonium isotopes (²³⁸Pu, ²³⁹Pu, ²⁴⁰Pu, ²⁴¹Pu) in environmental samples using radiochemical separation combined with radiometric and mass spectrometric measurements

DEFF Research Database (Denmark)

Xu, Yihong; Qiao, Jixin; Hou, Xiaolin

2014-01-01

counting and alpha spectrometry) and inductively coupled plasma mass spectrometry (ICP-MS) were applied for the measurement of plutonium isotopes. The decontamination factors for uranium were significantly improved up to 7.5×105 for 20 g soil compared to the level reported in the literature......, this is critical for the measurement of plutonium isotopes using mass spectrometric technique. Although the chemical yield of Pu in the entire procedure is about 55%, the analytical results of IAEA soil 6 and IAEA-367 in this work are in a good agreement with the values reported in the literature or reference......Pu. However, it is impossible to measure 238Pu using ICP-MS in environmental samples even a decontamination factor as high as 106 for uranium was obtained by chemical separation....

A review on the determination of isotope ratios of boron with mass spectrometry.

Science.gov (United States)

Aggarwal, Suresh Kumar; You, Chen-Feng

2017-07-01

The present review discusses different mass spectrometric techniques-viz, thermal ionization mass spectrometry (TIMS), inductively coupled plasma mass spectrometry (ICPMS), and secondary ion mass spectrometry (SIMS)-used to determine 11 B/ 10 B isotope ratio, and concentration of boron required for various applications in earth sciences, marine geochemistry, nuclear technology, environmental, and agriculture sciences, etc. The details of the techniques-P-TIMS, which uses Cs 2 BO 2 + , N-TIMS, which uses BO 2 - , and MC-ICPMS, which uses B + ions for bulk analysis or B - and B + ions for in situ micro-analysis with SIMS-are highlighted. The capabilities, advantages, limitations, and problems in each mass spectrometric technique are summarized. The results of international interlaboratory comparison experiments conducted at different times are summarized. The certified isotopic reference materials available for boron are also listed. Recent developments in laser ablation (LA) ICPMS and QQQ-ICPMS for solids analysis and MS/MS analysis, respectively, are included. The different aspects of sample preparation and analytical chemistry of boron are summarized. Finally, the future requirements of boron isotope ratios for future applications are also given. Presently, MC-ICPMS provides the best precision and accuracy (0.2-0.4‰) on isotope ratio measurements, whereas N-TIMS holds the potential to analyze smallest amount of boron, but has the issue of bias (+2‰ to 4‰) which needs further investigations. © 2016 Wiley Periodicals, Inc. Mass Spec Rev 36:499-519, 2017. © 2016 Wiley Periodicals, Inc.

Nitrogen Isotope Analyses in Mollusk Shell: Applications to Environmental Sciences and Archaeology.

Science.gov (United States)

Andrus, C. F. T.; Bassett, C.; Black, H. D.; Payne, T. N.

2017-12-01

Several recent studies demonstrate that nitrogen isotope analysis of the organic fraction of mollusk shells can serve as a proxy for anthropogenic environmental impacts, including sewage input into estuaries. Analysis of δ15N in shells from archaeological sites permits construction of time-series proxy data from the present day to pre-industrial times, yielding insight into the history of some human environmental influences such as waste input and land use changes. Most such studies utilize a single bulk analysis per valve, combining shell material grown over time periods of one or more years. However, large, fast-growing species (e.g. some scallops and abalone) may permit sub-annual sampling, potentially yielding insight into seasonal processes. Such sclerochronological sampling of archaeological shells may enable researchers to detect variation at a finer temporal scale than has been attempted to date, which in turn may facilitate analysis of seasonal resource procurement strategies and related actions. This presentation will incorporate new and published data from the Atlantic, Pacific and Gulf of Mexico coasts of North America to assess how sclerochronological δ15N data can be useful to better understand pre-industrial human-environmental interaction and change, and also address diagenesis and other preservational concerns commonly found in archaeological samples.

Vitamin A equivalency of ß-carotene in healthy adults: limitation of the extrinsic dual-isotope dilution technique to measure matrix effect

NARCIS (Netherlands)

Bouwman, C.A.; West, C.E.; Breemen, van R.B.; Zhu, D.; Siebelink, E.; Versloot, P.; Hulshof, P.J.M.; Lieshout, van M.; Russel, F.G.M.; Schaafsma, G.; Naber, T.H.J.

2009-01-01

Data on the vitamin A equivalency of ß-carotene in food are inconsistent. We quantified the vitamin A equivalency (¿g) of ß-carotene in two diets using the dual-isotope dilution technique and the oral¿faecal balance technique. A diet-controlled, cross-over intervention study was conducted in

Seepage investigation by using Isotope and Geophysical Techniques in Gumti Flood Embankment/Dyke, Comilla

International Nuclear Information System (INIS)

Ahmed, N.; Wallin, B. G.; Majumder, R. K.; Mikail, M.; Rahman, M. S.

2004-06-01

Gumti Flood Control Embankment/Dyke is vital for irrigation water supply and flood control. Water seepage/leakage and slope failures are the major issues in Gumti earthen dyke. The distinct seepage and slope failure zone were observed at three places (Farizpur, Kathalia and Ebdarpur) along the countryside of left dyke. The isotopic technique has been integrated in the conventional hydrologic investigations. The isotope methodology works essentially by developing a characteristics pattern of the isotopic composition to identify the sources and flow dynamics of seeping/leaking in the dykes. Two sampling campaigns were conducted; one was on October, 2002 and the other was on July, 2003; near the seepage/leakage site for chemical analysis and stable isotopic analysis (''2H and ''1 8 O). Both samplings were done after recession of peak water level in the Gumti river. Interpretation of the hydrochemical data implies that the groundwater near the investigated seepage zones is Na-Ca-HCO 3 type and the river water is Ca-Mg-HCO 3 type. The chlorides content of both groundwater and river water are found mostly similar, indicating mixing between the two water system. The stable isotopes (''2H and ''1 8 O) of groundwater fall on the Meteoric Water Line, ranging the oxygen-18 values from -4.98 to -5.46 per mil and deuterium values from -30.0 to -33.6 per mil. It indicates the recharge from the river water during peak water level in the river Gumti. On the other hand, the stable isotopes of the Gumti river show some evaporation effect, which might have occurred due to stagnation of flowing water in the river. The oxygen-18 and deuterium values for river water range from -3.61 to -4.43 per mil and from -22.30 to -28.48 per mil respectively. These isotope results reflect the hydraulic connectivity between the river water and groundwater through the base of dyke. The earth imaging resistivity survey was carried out in the dry period along the four above mentioned areas of the Gumti

Nuclear and isotopic techniques for the characterization of submarine groundwater discharge in coastal zones. Results of a coordinated research project 2001-2006

International Nuclear Information System (INIS)

2007-07-01

Submarine groundwater discharge (SGD) is now recognized as an important pathway between land and sea. As such, this flow may contribute to the biogeochemical and other marine budgets of nearshore waters. These discharges typically display significant spatial and temporal variability, making direct assessments difficult. Groundwater seepage is patchy, diffuse, temporally variable, and may involve multiple aquifers. Thus, the measurement of its magnitude and associated chemical fluxes is a challenging enterprise. An initiative on SGD characterization was developed by the IAEA and UNESCO in 2000 as a 5-year plan to assess methodologies and importance of SGD for coastal zone management. The IAEA component included a Coordinated Research Project (CRP) on Nuclear and Isotopic Techniques for the Characterization of Submarine Groundwater Discharge (SGD) in Coastal Zones, carried out jointly by the IAEA's Isotope Hydrology Section in Vienna and the Marine Environment Laboratory in Monaco, together with 9 laboratories from 8 countries. In addition to the IAEA, the Intergovernmental Oceanographic Commission (IOC) and the International Hydrological Programme (IHP) have provided support. This overall effort originally grew from a project sponsored by the Scientific Committee on Ocean Research (SCOR) who established a Working Group (112) on SGD. The activities included joint meetings (Vienna 2000, 2002, and 2005; Syracuse, Italy, 2001; and Monaco 2004), sampling expeditions (Australia 2000; Sicily 2001 and 2002; New York 2002; Brazil 2003; and Mauritius 2005), joint analytical work, data evaluation, and preparation of joint publications. The objectives of the CRP included the improvement of capabilities for water resources and environmental management of coastal zones; application of recently developed nuclear and isotopic techniques suitable for quantitative estimation of various components of SGD; understanding of the influence of SGD on coastal processes and on groundwater

Environmental hydrochemical and stabile isotope methods used to characterise the relation between karst water and surface water

Directory of Open Access Journals (Sweden)

Romeo Eftimi

2017-03-01

Full Text Available Karst aquifers are characterized by high heterogeneity of groundwater flow. The classical study methods such as boreholes, pumping tests, and point observations give important data but cannot be extended to the entire aquifer. However the environmental hydrochemical and stabile isotope methods could give important information about large scale aquifer characterization. Some study examples from Albania, shown in this paper, demonstrate the successful application of the isotope methods, which are more powerful if applied in combination with hydrochemical ones, for the identification of the karst water recharge sources. Among the isotope methods the altitude effect seems to be more indicative for the solution of the problem concerned. For characterising the lithology of karst rocks and the physical aspects of karst aquifers (type of groundwater flow the combined use of some hydrochemical parameters like the water conductivity, total hardness, ionic ratios rCa/ rMg, rSO4/r/mg, CO2 pressure and the indexes of calcite and (Sic and of dolomite saturation (Sid, result very useful.

Discriminating background from anthropogenic lead by isotopic methods

International Nuclear Information System (INIS)

Nelson, B.K.; O'Brien, H.E.

1995-01-01

The goal of this pilot project was to evaluate the practicality of using natural variations in the isotopic composition of lead to test for the presence of anthropogenic lead in soil, surface water and ground water. Complex chemical reactions in the environment may cause measured lead concentrations to be ambiguous indicators of anthropogenic lead component. The lead isotope tracer technique has the potential to identify both the presence and proportion of anthropogenic lead in the environment. The tested the lead isotope technique at Eielson Air Force Base, Alaska, on sources of suspected fuel contamination. Although the results are specific to this base, the general technique of using lead isotopes to trace the movement of anthropogenic lead is applicable to other CERCLA sites. The study had four objectives: (1) characterize the natural lead isotope composition of bedrock, stream sediment and soils; (2) characterize the isotopic composition of the contaminant lead derived from fuel; (3) evaluate the sensitivity of the isotopic method to distinguishing between anthropogenic and natural lead in soil and water samples and (4) evaluate the analytical feasibility and accuracy of the method at the Isotope Geochemistry Laboratory at the University of Washington

Expanding the isotopic toolbox: Applications of hydrogen and oxygen stable isotope ratios to food web studies

OpenAIRE

Hannah B Vander Zanden; David X Soto; Gabriel J Bowen; Keith A Hobson; Keith A Hobson

2016-01-01

The measurement of stable carbon (δ13C) and nitrogen (δ15N) isotopes in tissues of organisms has formed the foundation of isotopic food web reconstructions, as these values directly reflect assimilated diet. In contrast, stable hydrogen (δ2H) and oxygen (δ18O) isotope measurements have typically been reserved for studies of migratory origin and paleoclimate reconstruction based on systematic relationships between organismal tissue and local environmental water. Recently, innovative applicat...

Expanding the Isotopic Toolbox: Applications of Hydrogen and Oxygen Stable Isotope Ratios to Food Web Studies

OpenAIRE

Vander Zanden, Hannah B.; Soto, David X.; Bowen, Gabriel J.; Hobson, Keith A.

2016-01-01

The measurement of stable carbon (δ13C) and nitrogen (δ15N) isotopes in tissues of organisms has formed the foundation of isotopic food web reconstructions, as these values directly reflect assimilated diet. In contrast, stable hydrogen (δ2H) and oxygen (δ18O) isotope measurements have typically been reserved for studies of migratory origin and paleoclimate reconstruction based on systematic relationships between organismal tissue and local environmental water. Recently, innovative applicatio...

Determination of plutonium isotopic abundances by gamma-ray spectrometry. Interim report on the status of methods and techniques developed by the Lawrence Livermore Laboratory

International Nuclear Information System (INIS)

Gunnink, R.

1980-03-01

This report presents an overview of methods and techniques developed by the Lawrence Livermore Laboratory for determining plutonium isotopic abundances from gamma-ray spectra that have been measured with germanium detectors. The methodology of fitting the spectral features includes discussions of algorithms for gamma-ray and x-ray peak shape fitting and generation of response spectra profiles characteristic of specific isotopes. Applications of the techniques developed at government, commercial, and Japanese reprocessing plants are described. Current development of the methodology for the nondestructive analysis of samples containing nondescript solid materials is also presented

Determination of wall wear of glassmelting furnaces by a nuclear technique

International Nuclear Information System (INIS)

Harsanyi, Gyoergy; Kodolanyi, Andras; Leitner, Laszlo

1984-01-01

A new in-service inspection technique of glassmelting furnaces is reported. Isotope-labelled refractory tank blocks were prepared, tested experimentally, and built into the furnace. Sup(60)Co isotope tracer was used. The residual wall thickness of the labelled blocks were determined by periodical radiation dose measurements. No environmental or health damage is caused by the specific activity of 3.7 - 4 Bq/g of the labelled furnace blocks, the dose rate in a distance of 1 m from the wall was as low as 0.05 mR/h. (P.J.)

International symposium and field seminar on karst waters and environmental impacts. Abstracts

Energy Technology Data Exchange (ETDEWEB)

Gunay, G; Tezcan, L; Atilla, A O [comps.

1996-12-31

The international symposium and field seminar on karst waters and environmental impacts was held on 10-20 September 1995 in Beldibi,Antalya, Turkey. The specialists discussed COST Action 65, Environmental Impact sand Legal Aspects, Engineering and Environmental Impacts of Karst, Research Methods, Tracing Techniques, Hydro chemistry, Environmental Isotopes in Karst, Transport Processing, Modeling and Flow Systems, Karst Morphology and Paleoenvironment, Regional Karst Systems, James F. Quinlay Pollution Control and Karst Water Protection Session and Hydrology. Almost 140 papers were presented in the meeting.

International symposium and field seminar on karst waters and environmental impacts. Abstracts

International Nuclear Information System (INIS)

Gunay, G.; Tezcan, L.; Atilla, A.O.

1995-01-01

The international symposium and field seminar on karst waters and environmental impacts was held on 10-20 September 1995 in Beldibi,Antalya, Turkey. The specialists discussed COST Action 65, Environmental Impact sand Legal Aspects, Engineering and Environmental Impacts of Karst, Research Methods, Tracing Techniques, Hydro chemistry, Environmental Isotopes in Karst, Transport Processing, Modeling and Flow Systems, Karst Morphology and Paleoenvironment, Regional Karst Systems, James F. Quinlay Pollution Control and Karst Water Protection Session and Hydrology. Almost 140 papers were presented in the meeting

Marine water from mid-Holocene sea level highstand trapped in a coastal aquifer: Evidence from groundwater isotopes, and environmental significance