WorldWideScience

Sample records for environmental impact analysis

  1. Integrating health and environmental impact analysis

    DEFF Research Database (Denmark)

    Reis, S; Morris, G.; Fleming, L. E.

    2015-01-01

    which addresses human activity in all its social, economic and cultural complexity. The new approach must be integral to, and interactive, with the natural environment. We see the continuing failure to truly integrate human health and environmental impact analysis as deeply damaging, and we propose...... while equally emphasizing the health of the environment, and the growing calls for 'ecological public health' as a response to global environmental concerns now suffusing the discourse in public health. More revolution than evolution, ecological public health will demand new perspectives regarding...... the interconnections among society, the economy, the environment and our health and well-being. Success must be built on collaborations between the disparate scientific communities of the environmental sciences and public health as well as interactions with social scientists, economists and the legal profession...

  2. 10 CFR 503.13 - Environmental impact analysis.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Environmental impact analysis. 503.13 Section 503.13... Exemptions § 503.13 Environmental impact analysis. In order to enable OFE to comply with NEPA, a petitioner..., and land resources; (3) Direct and indirect environmental impacts of the proposed action including...

  3. Integrating health and environmental impact analysis.

    Science.gov (United States)

    Reis, S; Morris, G; Fleming, L E; Beck, S; Taylor, T; White, M; Depledge, M H; Steinle, S; Sabel, C E; Cowie, H; Hurley, F; Dick, J McP; Smith, R I; Austen, M

    2015-10-01

    Scientific investigations have progressively refined our understanding of the influence of the environment on human health, and the many adverse impacts that human activities exert on the environment, from the local to the planetary level. Nonetheless, throughout the modern public health era, health has been pursued as though our lives and lifestyles are disconnected from ecosystems and their component organisms. The inadequacy of the societal and public health response to obesity, health inequities, and especially global environmental and climate change now calls for an ecological approach which addresses human activity in all its social, economic and cultural complexity. The new approach must be integral to, and interactive, with the natural environment. We see the continuing failure to truly integrate human health and environmental impact analysis as deeply damaging, and we propose a new conceptual model, the ecosystems-enriched Drivers, Pressures, State, Exposure, Effects, Actions or 'eDPSEEA' model, to address this shortcoming. The model recognizes convergence between the concept of ecosystems services which provides a human health and well-being slant to the value of ecosystems while equally emphasizing the health of the environment, and the growing calls for 'ecological public health' as a response to global environmental concerns now suffusing the discourse in public health. More revolution than evolution, ecological public health will demand new perspectives regarding the interconnections among society, the economy, the environment and our health and well-being. Success must be built on collaborations between the disparate scientific communities of the environmental sciences and public health as well as interactions with social scientists, economists and the legal profession. It will require outreach to political and other stakeholders including a currently largely disengaged general public. The need for an effective and robust science-policy interface has

  4. Environmental impact statement analysis: dose methodology

    International Nuclear Information System (INIS)

    Mueller, M.A.; Strenge, D.L.; Napier, B.A.

    1981-01-01

    Standardized sections and methodologies are being developed for use in environmental impact statements (EIS) for activities to be conducted on the Hanford Reservation. Five areas for standardization have been identified: routine operations dose methodologies, accident dose methodology, Hanford Site description, health effects methodology, and socioeconomic environment for Hanford waste management activities

  5. Regional analysis and environmental impact assessment

    International Nuclear Information System (INIS)

    Parzyck, D.C.; Brocksen, R.W.; Emanuel, W.R.

    1976-01-01

    This paper presents a number of techniques that can be used to assess environmental impacts on a regional scale. Regional methodologies have been developed which examine impacts upon aquatic and terrestrial biota in regions through consideration of changes in land use, land cover, air quality, water resource use, and water quality. Techniques used to assess long-range atmospheric transport, water resources, effects on sensitive forest and animal species, and impacts on man are presented in this paper, along with an optimization approach which serves to integrate the analytical techniques in an overall assessment framework. A brief review of the research approach and certain modeling techniques used within one regional studies program is provided. While it is not an all inclusive report on regional analyses, it does present an illustration of the types of analyses that can be performed on a regional scale

  6. Environmental impact analysis of aquaculture in net cages in a ...

    African Journals Online (AJOL)

    Environmental impact analysis of aquaculture in net cages in a Brazilian water reservoir, based in zooplankton communities. Maria Cristina Crispim, Karla Patrícia Ponte Araújo, Hênio do Nascimento Melo Júnior ...

  7. Risk analysis within environmental impact assessment of proposed construction activity

    Energy Technology Data Exchange (ETDEWEB)

    Zeleňáková, Martina; Zvijáková, Lenka

    2017-01-15

    Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

  8. Risk analysis within environmental impact assessment of proposed construction activity

    International Nuclear Information System (INIS)

    Zeleňáková, Martina; Zvijáková, Lenka

    2017-01-01

    Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

  9. Environmental impact analysis of mine tailing reservoir

    Science.gov (United States)

    Gong, J. Z.

    2016-08-01

    Under certain conditions landscape topography which utilizes mine tailing reservoir construction using is likely to increase lateral recharge source regions, resulting in dramatic changes to the local hydrological dynamic field and recharge of downstream areas initiated by runoff, excretion state, elevated groundwater depth, shallow groundwater, rainfall direct communication, and thinning of the vadose zone. Corrosive leaching of topsoil over many years of exposure to chemical fertilizers and pesticides may result in their dissolution into the groundwater system, which may lead to excessive amounts of many harmful chemicals, therby affecting the physical and mental health of human residents and increase environmental vulnerability and risk associated with the water and soil. According to field survey data from Yujiakan, Qian'an City, and Hebei provinces, this paper analyzes the hydrogeological environmental mechanisms of areas adjacent to mine tailing reservoirs and establishes a conceptual model of the local groundwater system and the concentration-response function between NO3 - content in groundwater and the incidence of cancer in local residents.

  10. Analysis of the environmental impact generated by nuclear activities

    International Nuclear Information System (INIS)

    Lazar, Roxana Elena; Dumitrescu, Maria

    2000-01-01

    Assessment of environmental impact represents one of the most formalized examples of interdisciplinary approach. After more then a century from the introduction of the concept of environmental impact assessment, this undertaking still represents an amalgamation of mini-studies based on pre-determined approaches rather than a genuine integrated document. This work presents the most important and adequate techniques of analysis of environmental impact generated by nuclear activities starting from identification of the events causing negative effects upon environment (by using checking list, the matrices and the cause-effect diagram) and radiation dose determination up to the decision making process. To preserve environment integrity the human factor should be re-evaluated as well as its active participation in formation and settling of an real environmental culture

  11. Energy analysis and environmental impacts of microalgal biodiesel in China

    International Nuclear Information System (INIS)

    Liao Yanfen; Huang Zehao; Ma Xiaoqian

    2012-01-01

    The entire life cycle of biodiesel produced by microalgal biomasses was evaluated using the method of life cycle assessment (LCA) to identify and quantify the fossil energy requirements and environmental impact loading of the system. The life cycle considers microalgae cultivation, harvesting, drying, oil extraction, anaerobic digestion, oil transportation, esterification, biodiesel transportation and biodiesel combustion. The investigation results show that the fossil energy requirement for the biodiesel production is 0.74 MJ/MJ biodiesel, indicating that 1 MJ of biodiesel requires an input of 0.74 MJ of fossil energy. Accordingly, biodiesel production is feasible as an energy producing process. The environmental impact loading of microalgal biodiesel is 3.69 PET 2010 (Person Equivalents, Targeted, in 2010) and the GWP is 0.16 kg CO 2-eq /MJ biodiesel. The effects of photochemical ozone formation were greatest among all calculated categorization impacts. The fossil energy requirement and GWP in this operation were found to be particularly sensitive to oil content, drying rate and esterification rate. Overall, the results presented herein indicate that the cultivation of microalgae has the potential to produce an environmentally sustainable feedstock for the production of biodiesel. - Highlights: ► Do energy analysis and environmental impacts of algal biodiesel in China. ► GWP and energy consumption are sensitive to lipid content and drying rate. ► Fossil energy consumption for algal biodiesel is 0.74 MJ/MJ. ► Microalgae are an environmentally sustainable feedstock for biodiesel production.

  12. Environmental impact analysis for the main accidental sequences of ignitor

    International Nuclear Information System (INIS)

    Carpignano, A.; Francabandiera, S.; Vella, R.; Zucchetti, M.

    1996-01-01

    A safety analysis study has been applied to the Ignitor machine using Probabilistic Safety Assessment. The main initiating events have been identified, and accident sequences have been studied by means of traditional methods such as Failure Mode and Effect Analysis (FMEA), Fault Trees (FT) and Event Trees (ET). The consequences of the radioactive environmental releases have been assessed in terms of Effective Dose Equivalent (EDEs) to the Most Exposed Individuals (MEI) of the chosen site, by means of a population dose code. Results point out the low enviromental impact of the machine. 13 refs., 1 fig., 3 tabs

  13. 32 CFR 989.12 - AF Form 813, Request for Environmental Impact Analysis.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false AF Form 813, Request for Environmental Impact... FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.12 AF Form 813, Request for Environmental Impact Analysis. The Air Force uses AF Form 813 to document the need for...

  14. Comparative Analysis of Environmental Impacts of Selected Products

    Directory of Open Access Journals (Sweden)

    A. Fedoryszyn

    2013-01-01

    Full Text Available The purpose of the present study is to demonstrate that environmental impacts exerted by manufactured products throughout their entire life cycle are major aspects to be considered, alongside their functional features and cost-effectiveness. One of the available methods to evaluate environmental impacts is known to as the Life Cycle Assessment (LCA method.The study summarises the reports from the literature on the subject of environmental impact assessment. In conclusions, the authorsindicate the need for assessing the environmental impact of cast products made from conventional and newly introduced alloys.

  15. Comparative Analysis of Environmental Impacts of Selected Products

    Directory of Open Access Journals (Sweden)

    Fedoryszyn A.

    2013-03-01

    Full Text Available The purpose of the present study is to demonstrate that environmental impacts exerted by manufactured products throughout their entire life cycle are major aspects to be considered, alongside their functional features and cost-effectiveness. One of the available methods to evaluate environmental impacts is known to as the Life Cycle Assessment (LCA method. The study summarises the reports from the literature on the subject of environmental impact assessment. In conclusions, the authors indicate the need for assessing the environmental impact of cast products made from conventional and newly introduced alloys.

  16. Analysis of the Environmental Impact on Remanufacturing Wind Turbines

    Science.gov (United States)

    Sosa Skrainka, Manuel R.

    To deliver clean energy the use of wind turbines is essential. In June 2011 there was an installed wind capacity equivalent to 211,000MW world-wide (WWEA, 2011). By the end of the year 2009 the U.S. had 35,100MW of wind energy installed capacity to generate electricity (AWEA, 2010). This industry has grown in recent years and is expected to grow even more in the future. The environmental impacts that will arise from the increased number of wind turbines and their end-of-life should be addressed, as large amounts of resources will be required to satisfy the current and future market demands for wind turbines. Since future 10MW wind turbines are expected to be as heavy as 1000 tons each, the study of the environmental response of profitable retirement strategies, such as remanufacturing for these machines, must be considered. Because of the increased number of wind turbines and the materials used, this study provides a comparison between the environmental impacts from remanufacturing the components installed inside the nacelle of multi-megawatt wind turbines and wind turbines manufactured using new components. The study methodology is the following: • Describe the life-cycle and the materials and processes employed for the manufacture and remanufacturing for components inside the nacelle. • Identify remanufacturing alternatives for the components inside the nacelle at the end of the expected life-time service of wind turbines. • Evaluate the environmental impacts from the remanufactured components and compare the results with the impacts of the manufacturing of new components using SimaPro. • Conduct sensitivity analysis over the critical parameters of the life cycle assessment • Propose the most environmentally friendly options for the retirement of each major component of wind turbines. After an analysis of the scenarios the goal of the study is to evaluate remanufacturing as an end-of-life option from an environmental perspective for commercial multi

  17. Analysis of environmental impact assessment (EIA) system in Turkey.

    Science.gov (United States)

    Coşkun, Aynur Aydın; Turker, Ozhan

    2011-04-01

    The Environmental Impact Assessment (EIA) System, which embodies the "prevention principle" of the environmental law, is an important tool for environmental protection. This tool has a private importance for Turkey since it is a developing country, and it entered the Turkish law in 1983 with the Environmental Law. Besides, the EIA Regulation, which shows the application principles, became effective in 1993. Because Turkey is a candidate for European Union (EU), the EIA Regulation has been changed due to the EU compliance procedure, and its latest version became valid in 2008. This study aims to emphasize The EIA system in Turkey to supervise the efficiency of this procedure and point the success level. In the introduction part, general EIA concept, its importance, and some notations are mentioned. Following that, the legislation, which builds the EIA system, has been analyzed starting from the 1982 Turkish Constitution. Then, the legislation rules are explained due to the basic steps of the EIA procedure. In order to shed light upon the application, the EIA final decisions given until today, the results, and their distributions to the industries are assessed. In the final part of the study, a SWOT analysis is made to mention the weaknesses, strengths, opportunities, and threats of the EIA system in Turkey.

  18. 30 CFR 250.227 - What environmental impact analysis (EIA) information must accompany the EP?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What environmental impact analysis (EIA... and Information Contents of Exploration Plans (ep) § 250.227 What environmental impact analysis (EIA... requirements. Your EIA must: (1) Assess the potential environmental impacts of your proposed exploration...

  19. 78 FR 56869 - Nuclear Infrastructure Programmatic Environmental Impact Statement Supplement Analysis...

    Science.gov (United States)

    2013-09-16

    ... DEPARTMENT OF ENERGY Nuclear Infrastructure Programmatic Environmental Impact Statement Supplement... of Energy (DOE) has completed the Supplement Analysis (SA) of the Programmatic Environmental Impact Statement for Accomplishing Expanded Civilian Nuclear Energy Research and Development and Isotope Production...

  20. Impact of environmental justice analysis on transportation planning.

    Science.gov (United States)

    2011-12-30

    This report presents the findings of a study sponsored by the Georgia Department of Transportation (GDOT): Impact of Environmental Justice (EJ) on Transportation Planning. The objectives of the study were to determine the state of the practice of EJ ...

  1. Small-scale wind power design, analysis, and environmental impacts

    CERN Document Server

    Abraham, John P

    2014-01-01

    In today's world, clean and robust energy sources are being sought to provide power to residences, commercial operations, and manufacturing enterprises. Among the most appealing energy sources is wind power-with its high reliability and low environmental impact. Wind power's rapid penetration into markets throughout the world has taken many forms, and this book discusses the types of wind power, as well as the appropriate decisions that need to be made regarding wind power design, testing, installation, and analysis. Inside, the authors detail the design of various small-wind systems including horizontal-axis wind turbines (HAWTs) and vertical-axis wind turbines (VAWTs). The design of wind turbines takes advantage of many avenues of investigation, all of which are included in the book. Analytical methods that have been developed over the past few decades are major methods used for design. Alternatively, experimentation (typically using scaled models in wind tunnels) and numerical simulation (using modern comp...

  2. Draft Waste Management Programmatic Environmental Impact Statement for managing treatment, storage, and disposal of radioactive and hazardous waste. Volume 3, Appendix A: Public response to revised NOI, Appendix B: Environmental restoration, Appendix C, Environmental impact analysis methods, Appendix D, Risk

    International Nuclear Information System (INIS)

    1995-08-01

    Volume three contains appendices for the following: Public comments do DOE's proposed revisions to the scope of the waste management programmatic environmental impact statement; Environmental restoration sensitivity analysis; Environmental impacts analysis methods; and Waste management facility human health risk estimates

  3. Environmental Impacts of Sand Exploitation. Analysis of Sand Market

    Directory of Open Access Journals (Sweden)

    Marius Dan Gavriletea

    2017-06-01

    Full Text Available Sand is an indispensable natural resource for any society. Despite society’s increasing dependence on sand, there are major challenges that this industry needs to deal with: limited sand resources, illegal mining, and environmental impact of sand mining. The purpose of this paper is twofold: to present an overview of the sand market, highlighting the main trends and actors for production, export and import, and to review the main environmental impacts associated with sand exploitation process. Based on these findings, we recommend different measures to be followed to reduce negative impacts. Sand mining should be done in a way that limits environmental damage during exploitation and restores the land after mining operations are completed.

  4. Environmental analysis of Ribeiro wine from a timeline perspective: harvest year matters when reporting environmental impacts.

    Science.gov (United States)

    Vázquez-Rowe, Ian; Villanueva-Rey, Pedro; Moreira, Ma Teresa; Feijoo, Gumersindo

    2012-05-15

    A series of Galician (NW Spain) wines, such as Rías Baixas and Ribeiro have acquired international renown in the past few years. In this particular study, viticulture, vinification and bottling and packaging in a winery of the Ribeiro appellation were studied from a life cycle assessment perspective, with the main objective of identifying the largest environmental impacts for four different years of production (2007-2010). The selected functional unit was a 750 mL bottle of Ribeiro white wine, packaged for distribution. Inventory data was gathered mainly through direct communication using questionnaires. Results showed considerable annual variability in environmental performance, stressing the importance of including timeline analysis in the wine sector. Therefore, environmental scaling was proposed for the assessed wine based on the individual environmental impacts for each harvest year. Furthermore, the main hot spots identified were compost and pesticide production and emissions, in the agricultural phase and bottle production and electricity consumption, in the subsequent stages of wine production, in most of the selected impact categories. Suggested improvement opportunities included shifts in the compost transportation policy, recovery of natural resources for vineyard infrastructure, the introduction of new packaging formats in the bottling process and the use of pesticides with lower toxicity potential. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. A critical analysis of the impact assessment of environmental tritium

    International Nuclear Information System (INIS)

    Jain, Narendra; Bhatia, Arvind

    2013-01-01

    Tritium, a radionuclide of hydrogen has longer life and gets more rapidly dispersed, but before becoming globally distributed, it represents a significant radiobiological risk to the local population exposed. It is produced naturally in the upper atmosphere by the interaction of cosmic rays with nitrogen and hydrogen. The tritons in the upper atmosphere are oxidized to tritiated water (HTO) and mix with the hydrosphere generally through the movement of air masses and precipitation. Terrestrially, tritium may be formed by the action of lithium on neutrons. There is apprehension that the recent controversy concerning the health and environmental impact of tritium may end up as worldwide contaminants in the final analysis. From many varied reports from different laboratories, it appears that projected levels for fusion reactors may also produce deleterious and detectable effects. The degree of concern over tritium problem is evidenced by a rapid increase in publications on the health implications of environmental tritium. The present issues of controversy will be intensified as the fusion reactor technology approaches the door step of public and the possible health detriment from its radioactive emissions arouse concern. The current project has been planned keeping some such points in view. It reviews the work on the behavior of tritium in its various forms in the environment with an emphasis on the release from various sources, its world inventories at present level sand its transfer into the various compartments of ecosystems. Besides this, its metabolism in biosystem and the possible implications of low doses of tritium in present and future generations have also been discussed. (author)

  6. Initial Northwest Power Act Power Sales Contracts : Final Environmental Impact Statement. Volume 1, Environmental Analysis.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1992-01-01

    This is volume 1 of the final environmental impact statement of the Bonneville Power Administration Information is included on the following: Purpose of and need for action; alternatives including the proposed action; affected environment; and environmental consequences.

  7. Relating the environmental impact of consumption to household expenditures : An input-output analysis

    NARCIS (Netherlands)

    Kerkhof, Annemarie C.; Nonhebel, Sanderine; Moll, Henri C.

    2009-01-01

    In this paper we evaluate the relationships between household expenditures and the environmental impact categories climate change, acidification, eutrophication and smog formation, by combining household expenditures with environmentally extended input–output analysis. Expenditure elasticities are

  8. 2004 Power marketing program. Final environmental impact statement. Volume 1 - summary and environmental analysis

    International Nuclear Information System (INIS)

    1997-02-01

    The Sierra Nevada Region proposes to develop a plan to allocate power within its marketing areas of California and Nevada. Five alternatives were analyzed based on the possible range of operations of the Central Valley Project (CVP) hydroelectric system, levels of power purchases, and customer group allocations. Scheduling of the hydropower generating plants is the key difference across the alternatives. The peaking, preferred, renewables, and no-action alternatives are based on scheduling to emphasize peaking power. The baseload alternative assumes steady water releases. The analysis found no significant impacts overall. However, peaking operations tend to result in the greatest benefits and least negative effects to resources where impacts could be quantified. The peaking alternative was selected as the environmentally preferred alternative. The peaking alternative would add up to 317 MW of load-carrying capacity during August compared to taking no action. The preferred alternative results in up to a 262-MW gain and the baseload alternative results in a loss of 581 MW in comparison to the no-action alternative. Although it is not possible to determine where or when any lost capacity would be made up, building replacement capacity would result in land-use impacts and the use of natural and financial resources. The baseload alternative would result in more stable pool fluctuation within regulating reservoirs, which may benefit resident fish, recreation, and cultural resources; but these effects would be minor and could not be quantified. Environmental impacts within the CVP are limited to fluctuations in the regulating reservoirs. Changes in allocations to customer groups result in negligible regional economic effects. The renewables alternative is similar in CVP operation to the peaking alternative and melds 50 MW of renewables with CVP hydropower. Its environmental impacts vary, depending on the presence of biomass in the resource mix. 84 refs., 44 figs., 27 tabs

  9. A study on the environmental impacts analysis with life cycle analysis of NPPs

    International Nuclear Information System (INIS)

    Jeong, H. S.; Moon, K. H.; Youn, S. W.

    2003-01-01

    This Life Cycle Analysis (LCA) work was accomplished based on the ISO-14040 framework goal and scope definition, including life cycle inventory analysis, and life cycle impact assessment. For the selection of impact categories, resource use, global affairs, local affairs, and nuclear specific affair were considered. It was unexpected that environmental burdens are generally heavier in an electricity generation process than in upper stream and fabrication processes, except ODP and ETPs. It has been normally thought that environmental burden in upper steam would be heavier than those in other processes. This misconception could have originated from the ambiguous thought for end-of-pipe emissions and life cycle inventories

  10. Dual discounting in cost-benefit analysis for environmental impacts

    International Nuclear Information System (INIS)

    Kula, Erhun; Evans, David

    2011-01-01

    Discounting has been a long-established intertemporal efficiency tool in cost-benefit analysis which focuses on project selection at communal level with a view to maximising the social welfare. However, with the relentless growth in environmental stress that, in good parts, stems from investment projects the established criterion in discounting appears to be inadequate especially when environmental issues are taken into consideration. This paper looks at how dual focus on efficiency and sustainability can be achieved by using dual discounting, i.e. discounting environmental benefits separately and differently from other costs and benefits and applies this alternative criterion to an afforestation scheme in the United Kingdom which contains carbon sequestration in addition to timber benefits.

  11. Environmental impact analysis (EIA) concerning lodgepole pine forestry in Sweden

    International Nuclear Information System (INIS)

    Andersson, Bengt; Rosvall, Ola; Engelmark, Ola; Sjoeberg, Kjell

    1999-01-01

    This report presents an analysis of the ecological consequences of forestry with Canadian lodgepole pine introduced into Sweden. The report includes a compilation of present knowledge in the area, research priorities, and proposed measures for dealing with the negative environmental consequences that could arise. The point of departure of the analysis is a description of the properties of lodgepole pine, including species-specific characteristics of the tree, and changes in stand environment and silvicultural management practices that can be expected. The report describes the dispersal capacity of lodgepole pine in its new Swedish environment and the effects of host-parasite interactions. Thereafter, ecological effects on the capacity of the soil for sustainable production and on biological diversity at various scales (tree, stand, landscape) are analysed. Lodgepole pine forestry is also considered in relation to current laws and regulations as well as national and international environmental goals. At the end of the report, a strategy is proposed for handling the inevitable uncertainties associated with the introduction of exotic species 111 refs, 14 figs

  12. Relating the environmental impact of consumption to household expenditures. An input-output analysis

    International Nuclear Information System (INIS)

    Kerkhof, Annemarie C.; Nonhebel, Sanderine; Moll, Henri C.

    2009-01-01

    In this paper we evaluate the relationships between household expenditures and the environmental impact categories climate change, acidification, eutrophication and smog formation, by combining household expenditures with environmentally extended input-output analysis. Expenditure elasticities are examined with regression analysis, and are compared and interpreted on the basis of insight at the product level. With data from the Netherlands in the year 2000, we find that environmental impact increases with increasing household expenditures, although the degree to which the environmental impact increases differs per impact category. Climate change and eutrophication increase less than proportionally with increasing expenditures. Acidification increases nearly proportionally with increasing expenditures, whereas smog formation increases more than proportionally. It appears that the mix of necessities and luxuries to which an environmental impact is related is essential in explaining the relationship. (author)

  13. Environmental impact analysis: the first five years of the National Environmental Policy Act in the USA

    Energy Technology Data Exchange (ETDEWEB)

    Thorold, O

    1975-11-01

    The National Environmental Policy Act (NEPA) of 1969 was the first comprehensive law to subject decisions to an assessment of total environmental consequence and instill environmental attitudes throughout government. All agencies must submit impact projections of proposed as well as alternative actions. Twenty-one states have passed similar legislation. A review of the Act's provisions for oversight, court action, timing, content, and commenting procedures is followed by a five-year evaluation. Because NEPA is generally felt to be a realistic approach to decision making and not a substitute for other kinds of environmental control, Mr. Thorold feels the American experience has been positive and is worth modifying for other countries. The Act lacked a ''grandfather clause,'' which caused a difficult transition period while agencies coped with both new and existing projects and developed standards for identifying and reviewing impacts. As agencies recognized that delays from lawsuits often resulted from inadequate impact statements, the quality improved to meet the strict guidelines of the Council on Environmental Quality. Joint efforts of agencies, universities, consulting firms, and private groups have cooperated to improve environmental forecasting and promote full communication. The costs of preparing statements and those of abandoned projects are felt to be conservative when compared to the costs of pursuing inappropriate projects. (21 references) (DCK)

  14. Synthetic fuels and the environment: an environmental and regulatory impacts analysis

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-06-01

    Since July 1979 when DOE/EV-0044 report Environmental Analysis of Synthetic Liquid fuels was published the synthetic fuels program proposals of the Administration have undergone significant modifications. The program year for which the development goal of 1.5 million barrels per day is to be reached has been changed from 1990 to 1995. The program plan is now proposed to have two stages to ensure, among other things, better environmental protection: an initial stage emphasizing applied research and development (R and D), including environmental research, followed by a second stage that would accelerate deployment of those synthetic fuel technologies then judged most ready for rapid deployment and economic operation within the environmental protection requirements. These program changes have significantly expanded the scope of technologies to be considered in this environmental analysis and have increased the likelihood that accelerated environmental R and D efforts will be successful in solving principal environmental and worker safety concerns for most technologies prior to the initiation of the second stage of the accelerated deployment plan. Information is presented under the following section headings: summary; study description; the technologies and their environmental concerns (including, coal liquefaction and gasification, oil shale production, biomass and urban waste conversion); regulatory and institutional analyses; and environmental impacts analysis (including air and water quaility analyses, impacts of carbon dioxide and acid rain, water availability, solid and hazardous wastes, coal mining environmental impacts, transportation issues, community growth and change, and regional impacts). Additional information is presented in seventeen appendixes. (JGB)

  15. Managing the environmental impacts of land transport: integrating environmental analysis with urban planning

    International Nuclear Information System (INIS)

    Irving, Paul; Moncrieff, Ian

    2004-01-01

    Ecological systems have limits or thresholds that vary by pollutant type, emissions sources and the sensitivity of a given location. Human health can also indicate sensitivity. Good environmental management requires any problem to be defined to obtain efficient and effective solutions. Cities are where transport activities, effects and resource management decisions are often most focussed. The New Zealand Ministry of Transport has developed two environmental management tools. The Vehicle Fleet Model (VFM) is a predictive database of the environmental performance of the New Zealand traffic fleet (and rail fleet). It calculates indices of local air quality, stormwater, and greenhouse gases emissions. The second is an analytical process based on Environmental Capacity Analysis (ECA). Information on local traffic is combined with environmental performance data from the Vehicle Fleet Model. This can be integrated within a live, geo-spatially defined analysis of the overall environmental effects within a defined local area. Variations in urban form and activity (traffic and other) that contribute to environmental effects can be tracked. This enables analysis of a range of mitigation strategies that may contribute, now or in the future, to maintaining environmental thresholds or meeting targets. A case study of the application of this approach was conducted within Waitakere City. The focus was on improving the understanding of the relative significance of stormwater contaminants derived from land transport

  16. Draft Waste Management Programmatic Environmental Impact Statement for managing treatment, storage, and disposal of radioactive and hazardous waste. Volume 3, Appendix A: Public response to revised NOI, Appendix B: Environmental restoration, Appendix C, Environmental impact analysis methods, Appendix D, Risk

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    Volume three contains appendices for the following: Public comments do DOE`s proposed revisions to the scope of the waste management programmatic environmental impact statement; Environmental restoration sensitivity analysis; Environmental impacts analysis methods; and Waste management facility human health risk estimates.

  17. Environmental impact report (draft)

    Energy Technology Data Exchange (ETDEWEB)

    1980-05-01

    The three projects as proposed by Pacific Gas and Electric Company and the environmental analysis of the projects are discussed. Sections on the natural and social environments of the proposed projects and their surrounding areas consist of descriptions of the setting, discussions of the adverse and beneficial consequences of the project, and potential mitigation measures to reduce the effects of adverse impacts. The Environmental Impact Report includes discussions of unavoidable adverse effects, irreversible changes, long-term and cumulative impacts, growth-inducing effects, and feasible alternatives to the project. (MHR)

  18. Supplement analysis 2 of environmental impacts resulting from modifications in the West Valley Demonstration Project

    International Nuclear Information System (INIS)

    1998-01-01

    The West Valley Demonstration Project, located in western New York, has approximately 600,000 gallons of liquid high-level radioactive waste (HLW) in storage in underground tanks. While corrosion analysis has revealed that only limited tank degradation has taken place, the failure of these tanks could release HLW to the environment. Congress requires DOE to demonstrate the technology for removal and solidification of HLW. DOE issued the Final Environmental Impact Statement (FEIS) in 1982. The purpose of this second supplement analysis is to re-assess the 1982 Final Environmental Impact Statement's continued adequacy. This report provides the necessary and appropriate data for DOE to determine whether the environmental impacts presented by the ongoing refinements in the design, process, and operations of the Project are considered sufficiently bounded within the envelope of impacts presented in the FEIS and supporting documentation

  19. Environmental Impact Assessment for Socio-Economic Analysis of Chemicals

    DEFF Research Database (Denmark)

    Calow, Peter; Biddinger, G; Hennes, C

    This report describes the requirements for, and illustrates the application of, a methodology for a socio-economic analysis (SEA) especially as it might be adopted in the framework of REACH.......This report describes the requirements for, and illustrates the application of, a methodology for a socio-economic analysis (SEA) especially as it might be adopted in the framework of REACH....

  20. Comparative analysis of environmental impacts of agricultural production systems, agricultural input efficiency, and food choice

    Science.gov (United States)

    Clark, Michael; Tilman, David

    2017-06-01

    Global agricultural feeds over 7 billion people, but is also a leading cause of environmental degradation. Understanding how alternative agricultural production systems, agricultural input efficiency, and food choice drive environmental degradation is necessary for reducing agriculture’s environmental impacts. A meta-analysis of life cycle assessments that includes 742 agricultural systems and over 90 unique foods produced primarily in high-input systems shows that, per unit of food, organic systems require more land, cause more eutrophication, use less energy, but emit similar greenhouse gas emissions (GHGs) as conventional systems; that grass-fed beef requires more land and emits similar GHG emissions as grain-feed beef; and that low-input aquaculture and non-trawling fisheries have much lower GHG emissions than trawling fisheries. In addition, our analyses show that increasing agricultural input efficiency (the amount of food produced per input of fertilizer or feed) would have environmental benefits for both crop and livestock systems. Further, for all environmental indicators and nutritional units examined, plant-based foods have the lowest environmental impacts; eggs, dairy, pork, poultry, non-trawling fisheries, and non-recirculating aquaculture have intermediate impacts; and ruminant meat has impacts ∼100 times those of plant-based foods. Our analyses show that dietary shifts towards low-impact foods and increases in agricultural input use efficiency would offer larger environmental benefits than would switches from conventional agricultural systems to alternatives such as organic agriculture or grass-fed beef.

  1. Analysis of environmental impact assessment for large-scale X-ray medical equipments

    International Nuclear Information System (INIS)

    Fu Jin; Pei Chengkai

    2011-01-01

    Based on an Environmental Impact Assessment (EIA) project, this paper elaborates the basic analysis essentials of EIA for the sales project of large-scale X-ray medical equipment, and provides the analysis procedure of environmental impact and dose estimation method under normal and accident conditions. The key points of EIA for the sales project of large-scale X-ray medical equipment include the determination of pollution factor and management limit value according to the project's actual situation, the utilization of various methods of assessment and prediction such as analogy, actual measurement and calculation to analyze, monitor, calculate and predict the pollution during normal and accident condition. (authors)

  2. Environmental impact analysis of electric and hybrid vehicle batteries. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1977-12-16

    This environmental impact analysis of electric and hybrid vehicle batteries is intended to identify principal environmental impacts resulting directly or indirectly from the development of electric vehicle batteries. Thus, the result of this study could be used to determine the appropriate following step in the U.S. DOE's EIA process. The environmental impacts considered in this document are the incremental impacts generated during the various phases in the battery life cycle. The processes investigated include mining, milling, smelting, and refining of metallic materials for electrode components; manufacturing processes of inorganic chemicals and other materials for electrolytes and other hardware components; battery assembly processes; operation and maintenance of batteries; and recycling and disposal of used batteries. The severity of the incremental impacts is quantified to the extent consistent with the state-of-knowledge. Many of the industrial processes involve proprietary or patent information; thus, in many cases, the associated environmental impacts could not be determined. In addition, most candidate battery systems are still in the development phase. Thus, the manufacturing and recycling processes for most battery systems either have not been developed by industry, or the information is not available. For these cases, the associated environmental impact evaluations could only be qualitative, and the need for further investigations is indicated. 26 figures, 27 tables. (RWR)

  3. Analysis and assessment of environmental impacts of small hydro power plant in Slovakia

    Science.gov (United States)

    Zeleňáková, M.; Fijko, R.; Remeňáková, I.

    2017-10-01

    Environmental impact assessment (EIA) is an important process that, prior to approval of the investment plan, can provide a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to apply a specific methodology for the analysis and evaluation of the environmental impacts of selected constructions, namely, small hydro power plant, using matrix of impacts. This analysis method is intended not only to increase the clarity and precision of the evaluation process, but also to align it with the requirements of the environmental impact assessment system. This modification should improve the reliability of the environmental impact assessment, and could moreover also be applied to other infrastructure projects. Comparison of alternatives and designation of the optimal variant are implemented based on selected criteria that objectively describe the characteristic lines of the planned alternatives of activity and their impact on the environment. The use of proper EIA procedures can help the decision-makers to formulate proper activities based on qualified decisions. The designed project in Spišské Bystré, Slovakia is used as a case study to clarify and exemplify the methodology and techniques.

  4. Environmental Assessment: General Plan-Based Environmental Impact Analysis Process, Laughlin Air Force Base

    Science.gov (United States)

    2007-05-01

    BASED ENVIROMENTAL IMPACT ANALYSIS PROCESS LAUGHLIN AIR FORCE BASE, TEXAS AGENCY: 47th Flying Training Wing (FTW), Laughlin Air Force Base (AFB), Texas...m3 micrograms per cubic meter US United States USACE United States Army Corp of Engineers USC United States Code USCB United States Census Bureau...effects and annoyance in that very few flight operations and ground engine runs occur between 2200 hours and 0700 hours. BMPs include restricting the

  5. Environmental impact analysis of the Nuclear Merchant Ship Program-addendum. Special study

    International Nuclear Information System (INIS)

    1977-06-01

    This study represents a qualitative extension of an earlier Environmental Impact Analysis of the Nuclear Merchant Ship Program (MarAd, 1975) using an Ultra Large Crude Carrier (ULCC) as the reference ship, to other types of ships including a containership, dry-bulk cargo vessel, and an icebreaking oil tanker. This qualitative analysis shows that, for ships operating into coastal ports (containerships and possibly dry-bulk carriers), both ecological and radiological impacts would be somewhat greater than for the reference ULCC docking at an offshore terminal. These impacts can be kept within the guidelines established for land based nuclear power plants by implementation of appropriate operating procedures

  6. Environmental Modeling and Bayesian Analysis for Assessing Human Health Impacts from Radioactive Waste Disposal

    Science.gov (United States)

    Stockton, T.; Black, P.; Tauxe, J.; Catlett, K.

    2004-12-01

    Bayesian decision analysis provides a unified framework for coherent decision-making. Two key components of Bayesian decision analysis are probability distributions and utility functions. Calculating posterior distributions and performing decision analysis can be computationally challenging, especially for complex environmental models. In addition, probability distributions and utility functions for environmental models must be specified through expert elicitation, stakeholder consensus, or data collection, all of which have their own set of technical and political challenges. Nevertheless, a grand appeal of the Bayesian approach for environmental decision- making is the explicit treatment of uncertainty, including expert judgment. The impact of expert judgment on the environmental decision process, though integral, goes largely unassessed. Regulations and orders of the Environmental Protection Agency, Department Of Energy, and Nuclear Regulatory Agency orders require assessing the impact on human health of radioactive waste contamination over periods of up to ten thousand years. Towards this end complex environmental simulation models are used to assess "risk" to human and ecological health from migration of radioactive waste. As the computational burden of environmental modeling is continually reduced probabilistic process modeling using Monte Carlo simulation is becoming routinely used to propagate uncertainty from model inputs through model predictions. The utility of a Bayesian approach to environmental decision-making is discussed within the context of a buried radioactive waste example. This example highlights the desirability and difficulties of merging the cost of monitoring, the cost of the decision analysis, the cost and viability of clean up, and the probability of human health impacts within a rigorous decision framework.

  7. Environmental impact assessment including indirect effects--a case study using input-output analysis

    International Nuclear Information System (INIS)

    Lenzen, Manfred; Murray, Shauna A.; Korte, Britta; Dey, Christopher J.

    2003-01-01

    Environmental impact assessment (EIA) is a process covered by several international standards, dictating that as many environmental aspects as possible should be identified in a project appraisal. While the ISO 14011 standard stipulates a broad-ranging study, off-site, indirect impacts are not specifically required for an Environmental Impact Statement (EIS). The reasons for this may relate to the perceived difficulty of measuring off-site impacts, or the assumption that these are a relatively insignificant component of the total impact. In this work, we describe a method that uses input-output analysis to calculate the indirect effects of a development proposal in terms of several indicator variables. The results of our case study of a Second Sydney Airport show that the total impacts are considerably higher than the on-site impacts for the indicators land disturbance, greenhouse gas emissions, water use, emissions of NO x and SO 2 , and employment. We conclude that employing input-output analysis enhances conventional EIA, as it allows for national and international effects to be taken into account in the decision-making process

  8. An Analysis of the Most Adopted Rating Systems for Assessing the Environmental Impact of Buildings

    Directory of Open Access Journals (Sweden)

    Elena Bernardi

    2017-07-01

    Full Text Available Rating systems for assessing the environmental impact of buildings are technical instruments that aim to evaluate the environmental impact of buildings and construction projects. In some cases, these rating systems can also cover urban-scale projects, community projects, and infrastructures. These schemes are designed to assist project management in making the projects more sustainable by providing frameworks with precise criteria for assessing the various aspects of a building’s environmental impact. Given the growing interest in sustainable development worldwide, many rating systems for assessing the environmental impact of buildings have been established in recent years, each one with its peculiarities and fields of applicability. The present work is motivated by an interest in emphasizing such differences to better understand these rating systems and extract the main implications to building design. It also attempts to summarize in a user-friendly form the vast and fragmented assortment of information that is available today. The analysis focuses on the six main rating systems: the Building Research Establishment Environmental Assessment Methodology (BREEAM, the Comprehensive Assessment System for Built Environment Efficiency (CASBEE, the Deutsche Gesellschaft für Nachhaltiges Bauen (DGNB, the Haute Qualité Environnementale (HQETM, the Leadership in Energy and Environmental Design (LEED, and the Sustainable Building Tool (SBTool.

  9. Comparative analysis of energy impacts of traditional and partly electronic environmental auditing: Learning from the Japanese automotive industry case

    OpenAIRE

    Mbohwa, C

    2008-01-01

    This paper does a comparative analysis and assessment of energy impacts of traditional and partly electronic ISO 14001 environmental management system auditing that using videoconferencing systems. The focus is on the Japanese automotive industry. The idea is to quantify the environmental impacts of auditing and resolve the important question on whether or not the use of information and communication technology (ICT) in environmental auditing reduces environmental impacts in IS...

  10. Analysis of the environmental impact of China based on STIRPAT model

    International Nuclear Information System (INIS)

    Lin Shoufu; Zhao Dingtao; Marinova, Dora

    2009-01-01

    Assuming that energy consumption is the main source of GHG emissions in China, this paper analyses the effect of population, urbanisation level, GDP per capita, industrialisation level and energy intensity on the country's environmental impact using the STIRPAT model with data for 1978-2006. The analysis shows that population has the largest potential effect on environmental impact, followed by urbanisation level, industrialisation level, GDP per capita and energy intensity. Hence, China's One Child Policy, which restrains rapid population growth, has been an effective way of reducing the country's environmental impact. However, due to the difference in growth rates, GDP per capita had a higher effect on the environmental impact, contributing to 38% of its increase (while population's contribution was at 32%). The rapid decrease in energy intensity was the main factor restraining the increase in China's environmental impact but recently it has also been rising. Against this background, the future of the country looks bleak unless a change in human behaviour towards more ecologically sensitive economic choices occurs.

  11. Analysis of environmental impact phase in the life cycle of a nuclear power plant

    International Nuclear Information System (INIS)

    Hernandez del M, C.

    2015-01-01

    The life-cycle analysis covers the environmental aspects of a product throughout its life cycle. The focus of this study was to apply a methodology of life-cycle analysis for the environmental impact assessment of a nuclear power plant by analyzing international standards ISO 14040 and 14044. The methodology of life-cycle analysis established by the ISO 14044 standard was analyzed, as well as the different impact assessment methodologies of life cycle in order to choose the most appropriate for a nuclear power plant; various tools for the life-cycle analysis were also evaluated, as is the use of software and the use of databases to feed the life cycle inventory. The functional unit chosen was 1 KWh of electricity, the scope of analysis ranging from the construction and maintenance, disposal of spent fuel to the decommissioning of the plant, the manufacturing steps of the fuel were excluded because in Mexico is not done this stage. For environmental impact assessment was chosen the Recipe methodology which evaluates up to 18 impact categories depending on the project. In the case of a nuclear power plant were considered only categories of depletion of the ozone layer, climate change, ionizing radiation and formation of particulate matter. The different tools for life-cycle analysis as the methodologies of impact assessment of life cycle, different databases or use of software have been taken according to the modeling of environmental sensitivities of different regions, because in Mexico the methodology for life-cycle analysis has not been studied and still do not have all the tools necessary for the evaluation, so the uncertainty of the data supplied and results could be higher. (Author)

  12. Scenario analysis in environmental impact assessment: Improving explorations of the future

    International Nuclear Information System (INIS)

    Duinker, Peter N.; Greig, Lorne A.

    2007-01-01

    Scenarios and scenario analysis have become popular approaches in organizational planning and participatory exercises in pursuit of sustainable development. However, they are little used, at least in any formal way, in environmental impact assessment (EIA). This is puzzling because EIA is a process specifically dedicated to exploring options for more-sustainable (i.e., less environmentally damaging) futures. In this paper, we review the state of the art associated with scenarios and scenario analysis, and describe two areas where scenario analysis could be particularly helpful in EIA: (a) in defining future developments for cumulative effects assessment; and (b) in considering the influence of contextual change - e.g. climate change - on impact forecasts for specific projects. We conclude by encouraging EIA practitioners to learn about the promise of scenario-based analysis and implement scenario-based methods so that EIA can become more effective in fostering sustainable development

  13. Solid waste accident analysis in support of the Savannah River Waste Management Environmental Impact Statement

    International Nuclear Information System (INIS)

    Copeland, W.J.; Crumm, A.T.; Kearnaghan, D.P.; Rabin, M.S.; Rossi, D.E.

    1994-07-01

    The potential for facility accidents and the magnitude of their impacts are important factors in the evaluation of the solid waste management addressed in the Environmental Impact Statement. The purpose of this document is to address the potential solid waste management facility accidents for comparative use in support of the Environmental Impact Statement. This document must not be construed as an Authorization Basis document for any of the SRS waste management facilities. Because of the time constraints placed on preparing this accident impact analysis, all accident information was derived from existing safety documentation that has been prepared for SRS waste management facilities. A list of facilities to include in the accident impact analysis was provided as input by the Savannah River Technology Section. The accident impact analyses include existing SRS waste management facilities as well as proposed facilities. Safety documentation exists for all existing and many of the proposed facilities. Information was extracted from this existing documentation for this impact analysis. There are a few proposed facilities for which safety analyses have not been prepared. However, these facilities have similar processes to existing facilities and will treat, store, or dispose of the same type of material that is in existing facilities; therefore, the accidents can be expected to be similar

  14. Environmental Impact Assessment Process for Oil, Gas and Mining Projects in Nigeria: A Critical Analysis

    Directory of Open Access Journals (Sweden)

    Allan Ingelson and Chilenye Nwapi

    2014-06-01

    Full Text Available Oil and gas development projects are well known to have damaging environmental effects, and that is especially true in the Niger Delta region. Since the enactment of the Environmental Impact Assessment Act in Nigeria in 1992, there has been a general perception that EIAs are seldom carried out in the region. This article presents a critical analysis of legislation and practice concerning the environmental impact assessment (EIA process for oil and gas projects in Nigeria, the world’s twelfth largest producer of crude oil. It discusses a range of reasons why the impacts of oil and gas projects are not being managed well, despite the legal requirements for EIAs. A review of Nigeria’s environmental governance is presented along with a comprehensive discussion of the EIA process and its significant deficiencies. We argue that the EIA system for oil and gas projects in Nigeria reflects tokenism, resulting in the concentration of benefits of developments in big corporations and government officials. The EIA process in Nigeria faces many challenges that must be addressed in order to improve its effectiveness and alleviate the environmental burdens on this rich oil-producing region.

  15. Environmental Impact Analysis of Acidification and Eutrophication Due to Emissions from the Production of Concrete

    Directory of Open Access Journals (Sweden)

    Tae Hyoung Kim

    2016-06-01

    Full Text Available Concrete is a major material used in the construction industry that emits a large amount of substances with environmental impacts during its life cycle. Accordingly, technologies for the reduction in and assessment of the environmental impact of concrete from the perspective of a life cycle assessment (LCA must be developed. At present, the studies on LCA in relation to greenhouse gas emission from concrete are being carried out globally as a countermeasure against climate change. However, the studies on the impact of the substances emitted in the concrete production process on acidification and eutrophication are insufficient. As such, assessing only a single category of environmental impact may cause a misunderstanding about the environmental friendliness of concrete. The substances emitted in the concrete production process have an impact not only on global warming but also on acidification and eutrophication. Acidification and eutrophication are the main causes of air pollution, forest destruction, red tide phenomena, and deterioration of reinforced concrete structures. For this reason, the main substances among those emitted in the concrete production process that have an impact on acidification and eutrophication were deduced. In addition, an LCA technique through which to determine the major emissions from concrete was proposed and a case analysis was carried out. The substances among those emitted in the concrete production process that are related to eutrophication were deduced to be NOx, NH3, NH4+, COD, NO3−, and PO43−. The substances among those emitted in the concrete production process that are related to acidification, were found to be NOx, SO2, H2S, and H2SO4. The materials and energy sources among those input into the concrete production process, which have the biggest impact on acidification and eutrophication, were found to be coarse aggregate and fine aggregate.

  16. An economic analysis of transportation fuel policies in Brazil: Fuel choice, land use, and environmental impacts

    International Nuclear Information System (INIS)

    Nuñez, Hector M.; Önal, Hayri

    2016-01-01

    Brazil uses taxes, subsidies, and blending mandates as policy instruments to manage and stabilize its transportation fuel markets. The fuel sector has been very dynamic in recent years due to frequent policy adjustments and variable market conditions. In this paper, we use a price endogenous economic simulation model to analyze the impacts of such policy adjustments under various challenging conditions in the global ethanol and sugar markets. Our analysis specifically focuses on Brazilian producers' supply responses, consumers' driving demand and fuel choice, ethanol trade, land use, greenhouse gas emissions, and social welfare. The model results show that (i) under a low ethanol blending rate, conventional vehicles would be driven significantly less while flex-fuel and ethanol-dedicated vehicles would not be affected significantly; (ii) lowering the fuel taxes adversely affects the competitiveness of sugarcane ethanol against gasoline blends, thus lowering producers' surplus; and (iii) while a reduction in fuel taxes is advantageous in terms of overall social welfare, it has serious environmental impacts by increasing the GHG emissions from transportation fuels consumed in Brazil. - Highlights: • We examine the economic and environmental impacts of Brazilian fuel policies. • We also analyze impacts under different sugar and ethanol markets conditions. • Lowering blending rate reduces distance driven by conventional cars. • Lowering fuel tax rates affects competitiveness of ethanol against gasoline blend. • Reducing fuel tax rates has dramatic environmental impacts by increasing emissions.

  17. Ecotourism versus Mass Tourism. A Comparison of Environmental Impacts Based on Ecological Footprint Analysis

    Directory of Open Access Journals (Sweden)

    Jérôme Ballet

    2012-01-01

    Full Text Available Academic and policy interest in ecological footprint analysis has grown rapidly in recent years. To date, however, the application of ecological footprint analysis to tourism has been limited. This article aims to discuss the potential of ecological footprint analysis to assess sustainability in tourism. It is about a comparison of the global environmental impacts of different forms of tourism in southern countries where tourism is a major source of foreign exchange earnings. It illustrates how an ecotourism destination has a larger ecological footprint than a “mass” tourism destination.

  18. LCI Databases Sensitivity Analysis of the Environmental Impact of the Injection Molding Process

    Directory of Open Access Journals (Sweden)

    Ana Elduque

    2015-03-01

    Full Text Available During the last decades, society’s concern for the environment has increased. Specific tools like the Life Cycle Assessment (LCA, and software and databases to apply this method have been developed to calculate the environmental burden of products or processes. Calculating the environmental impact of plastic products is relevant as the global plastics production rose to 288 million tons in 2012. Among the different ways of processing plastics, the injection molding process is one of the most used in the industry worldwide. In this paper, a sensitivity analysis of the environmental impact of the injection molding process has been carried out. In order to perform this study, the EcoInvent database inventory for injection molding, and the data from which this database is created, have been studied. Generally, when an LCA of a product is carried out, databases such as EcoInvent, where materials, processes and transports are characterized providing average values, are used to quantify the environmental impact. This approach can be good enough in some cases but in order to assess a specific production process, like injection molding, a further level of detail is needed. This study shows how the final results of environmental impact differ for injection molding when using the PVC’s, PP’s or PET’s data. This aspect suggests the necessity of studying, in a more precise way, this process, to correctly evaluate its environmental burden. This also allows us to identify priority areas and thereby actions to develop a more sustainable way of manufacturing plastics.

  19. Low-level waste management alternatives and analysis in DOE`s programmatic environmental impact statement

    Energy Technology Data Exchange (ETDEWEB)

    Gerstein, J.S. [Dept. of Energy, Washington, DC (United States). Office of Environmental Restoration and Waste Management

    1993-03-01

    The Department of Energy is preparing a Programmatic Environmental Impact Statement (PEIS) for the Environmental Restoration and Waste Management Program. The PEIS has been divided into an Environmental Restoration section and a Waste Management section. Each section has a unique set of alternatives. This paper will focus on the waste management alternatives and analysis. The set of alternatives for waste management has been divided into waste categories. These categories are: high-level waste, transuranic waste, low-level waste, low-level mixed waste, greater-than-class C and low-level waste from commercial sources, hazardous waste, and spent nuclear fuel. This paper will discuss the alternatives and analytical approach that will be used to evaluate these alternatives for the low-level waste section. Although the same alternatives will be considered for all waste types, the analysis will be performed separately for each waste type. In the sections that follow, information will be provided on waste management configurations, the analysis of waste management alternatives, waste types and locations, facility and transportation activities, the facility and transportation impacts assessment, and the compilation of impacts.

  20. Environmental Impact Analysis Process. Final Environmental Impact Statement for Expansion of the Melrose Air Force Range, Curry and Roosevelt Counties, New Mexico

    Science.gov (United States)

    1985-04-18

    County’s status of meeting the national ambient air quality standards (NAAQS). EPA indicates that ambient concentrations of particulates and sulfur...EPA ruled on the attainment status of the national ambient air quality standards. 19 rN 0 UN Nr Nr a, -4 CL CA N o4 A r- No co 0 N Ar w -4- .- t- ai...Environmental Impacto --- N C Statement (EIS), or file a Finding Of Nto Slni Icant Impact (FONSI). In either case, docu-nenrration of the environmental analysis

  1. Environmental impact analysis; the example of the proposed Trans-Alaska Pipeline

    Science.gov (United States)

    Brew, David A.

    1974-01-01

    The environmental impact analysis made as required by the National Environmental Policy Act of 1969 for the proposed trans-Alaska pipeline included consideration of the (1) technologically complex and geographically extensive proposed project, (2) extremely different physical environments across Alaska along the proposed route and elsewhere in Alaska and in Canada along alternative routes, (3) socioeconomic environment of the State of Alaska, and (4) a wide variety of alternatives. The analysis was designed specifically to fit the project and environment that would be affected. The environment was divided into two general parts--natural physical systems and superposed socioeconomic systems--and those parts were further divided into discipline-oriented systems or components that were studied and analyzed by scientists of the appropriate discipline. Particular attention was given to potential feedback loops in the impact network and to linkages between the project's impacting effects and the environment. The results of the analysis as reported in the final environmental impact statement were that both unavoidable and threatened environmental impacts would result from construction, operation, and maintenance of the proposed pipeline system and the developments related to it. The principal unavoidable effects would be (1) disturbances of terrain, fish and wildlife habitat, and human environs, (2) the results of the discharge of effluent from the tanker-ballast-treatment facility into Port Valdez and of some indeterminate amount of oil released into the ocean from tank-cleaning operations at sea, and (3) the results associated with increased human pressures of all kinds on the environment. Other unavoidable effects would be those related to increase of State and Native Corporation revenues, accelerated cultural change of the Native population, and extraction of the oil and gas resource. The main threatened environmental effects would all be related to unintentional oil

  2. Environmental impact assessment in Colombia: Critical analysis and proposals for improvement

    International Nuclear Information System (INIS)

    Toro, Javier; Requena, Ignacio; Zamorano, Montserrat

    2010-01-01

    The evaluation of Environmental Impact Assessment (EIA) systems is a highly recommended strategy for enhancing their effectiveness and quality. This paper describes an evaluation of EIA in Colombia, using the model and the control mechanisms proposed and applied in other countries by Christopher Wood and Ortolano. The evaluation criteria used are based on Principles of Environmental Impact Assessment Best Practice, such as effectiveness and control features, and they were contrasted with the opinions of a panel of Colombian EIA experts as a means of validating the results of the study. The results found that EIA regulations in Colombia were ineffective because of limited scope, inadequate administrative support and the inexistence of effective control mechanisms and public participation. This analysis resulted in a series of recommendations regarding the further development of the EIA system in Colombia with a view to improving its quality and effectiveness.

  3. Lifecycle Analysis of Different Motors from the Standpoint of Environmental Impact

    Directory of Open Access Journals (Sweden)

    Orlova S.

    2016-12-01

    Full Text Available Comparative analysis is performed for different motors from the standpoint of damage inflicted by them during their lifecycle. Three types of motors have been considered: the synchronous reluctance motor, the permanent magnet assisted synchronous reluctance motor and the induction motor. The assessment of lifecycle has been made in terms of its four stages: manufacturing, distribution, use and end of life. The results show that the production costs of synchronous reluctance motor are lower compared to that of permanent magnet assisted motors, but due to their low efficiency they exert the greatest environmental impact. The main conclusion is that the assessment made at the early designing stage for the related environmental impact enables its reduction.

  4. Multicriteria analysis to evaluate wave energy converters based on their environmental impact: an Italian case study

    Science.gov (United States)

    Azzellino, Arianna; Contestabile, Pasquale; Lanfredi, Caterina; Vicinanza, Diego

    2010-05-01

    The exploitation of renewable energy resources is fast becoming a key objective in many countries. Countries with coastlines have particularly valuable renewable energy resources in the form of tides, currents, waves and offshore wind. Due to the visual impact of siting large numbers of energy generating devices (eg. wind turbines) in terrestrial landscapes, considerable attention is now being directed towards coastal waters. Due to their environmental sensitivity, the selection of the most adequate location for these systems is a critical factor. Multi-criteria analysis allows to consider a wide variety of key characteristics (e.g. water depth, distance to shore, distance to the electric grid in land, geology, environmental impact) that may be converted into a numerical index of suitability for different WEC devices to different locations. So identifying the best alternative between an offshore or a onshore device may be specifically treated as a multicriteria problem. Special enphasisi should be given in the multicriteria analysis to the environmental impact issues. The wave energy prospective in the Italian seas is relatively low if compared to the other European countries faced to the ocean. Based on the wave climate, the Alghero site, (NW Sardinia, Italy) is one of the most interesting sites for the wave energy perspective (about 10 kW/m). Alghero site is characterized by a high level of marine biodiversity. In 2002 the area northern to Alghero harbour (Capo Caccia-Isola Piana) was established a Marine Protected Area (MPA). It could be discussed for this site how to choose between the onshore/offshore WEC alternative. An offshore device like Wave Dragon (http://www.wavedragon.net/) installed at -65m depth (width=300m and length=170 m) may approximately produce about 3.6 GWh/y with a total cost of about 9,000,000 €. On the other hand, an onshore device like SSG (http://waveenergy.no/), employed as crown wall for a vertical breakwater to enlarge the present

  5. Air quality impact analysis in support of the new production reactor environmental impact statement

    International Nuclear Information System (INIS)

    Hadley, D.L.

    1991-04-01

    The Pacific Northwest Laboratory (PNL) conducted this air quality impact analysis for the US Department of Energy (DOE). The purpose of this work was to provide Argonne National Laboratory (ANL) with the required estimates of ground-level concentrations of five criteria air pollutants at the Hanford Site boundary from each of the stationary sources associated with the new production reactor (NPR) and its supporting facilities. The DOE proposes to provide new production capacity for the primary production of tritium and secondary production of plutonium to support the US nuclear weapons program. Three alternative reactor technologies are being considered by DOE: the light-water reactor, the low-temperature, heavy-water reactor, and the modular high-temperature, gas-cooled reactor. In this study, PNL provided estimates of the impacts of the proposed action on the ground-level concentration of the criteria air pollutants for each of the alternative technologies. The criteria pollutants were sulfur dioxide, nitrogen dioxide, carbon monoxide, total suspended particulates, and particulates with a diameter of less than 10 microns. Ground-level concentrations were estimated for the peak construction phase activities expected to occur in 1997 and for the operational phase activities beginning in the year 2000. Ground-level concentrations of the primary air pollutants were estimated to be well below any of the applicable national or state ambient air quality standards. 12 refs., 19 tabs

  6. A comparative analysis of environmental impacts of non-fossil energy production methods

    Science.gov (United States)

    Kiss, Adam

    2014-12-01

    The widespread proliferation of other then fossil based energy production methods is a development, which inevitable comes in the next future. It is proven that the photovoltaic conversion or the use of heat of Sun radiation, the water energy, the utilization of the wind, the biomass production, the use of geothermal energy can all produce big amounts of energy for human use. In addition, the nuclear energy from fission is a technology, which has already long history and is widely used. However, these all, like the fossil energy sources, have great impacts on the environment. Nevertheless, the comparison of the environmental effects of these alternative energy sources is not easy. The effects are of considerable different natures and their spatial and the time distributions vary on large scales. The present work overviews the principles and the methodological prerequisites of performing a comparative analysis of the environmental effects for the non-fossil energy production methods. After establishing the basic principles for comparison, we shall go through all the non-fossil energy sources and analyze the most important environmental impacts of each energy production method. In conclusion, the comparison of the environmental effects will be discussed.

  7. A comparative analysis of environmental impacts of non-fossil energy production methods

    Directory of Open Access Journals (Sweden)

    Kiss Adam

    2014-01-01

    Full Text Available The widespread proliferation of other then fossil based energy production methods is a development, which inevitable comes in the next future. It is proven that the photovoltaic conversion or the use of heat of Sun radiation, the water energy, the utilization of the wind, the biomass production, the use of geothermal energy can all produce big amounts of energy for human use. In addition, the nuclear energy from fission is a technology, which has already long history and is widely used. However, these all, like the fossil energy sources, have great impacts on the environment. Nevertheless, the comparison of the environmental effects of these alternative energy sources is not easy. The effects are of considerable different natures and their spatial and the time distributions vary on large scales. The present work overviews the principles and the methodological prerequisites of performing a comparative analysis of the environmental effects for the non-fossil energy production methods. After establishing the basic principles for comparison, we shall go through all the non-fossil energy sources and analyze the most important environmental impacts of each energy production method. In conclusion, the comparison of the environmental effects will be discussed.

  8. Environmental Impact Analysis Process. Environmental Assessment for Space Division Proposed Housing, White Point, San Pedro, California

    Science.gov (United States)

    1984-07-01

    design of runoff control facilities, and the use of standard engineering practices, are expected to render any potential impacts negligible. E. Diking...Angeles Star in the 1800’s ( Heizer 1968). 1-21 Further information on the Gabrielino can be found in "Calif- ornia’s Gabrielino Indians" by Bernice Eastman...indicated to be located near to or within the project area ( Heizer 1968). Similarly, a list of Gabrielino sites in the Bureau of American Ethnology’s (1952

  9. Modelling of environmental impacts of solid waste landfilling within the life-cycle analysis program EASEWASTE.

    Science.gov (United States)

    Kirkeby, Janus T; Birgisdottir, Harpa; Bhander, Gurbakash Singh; Hauschild, Michael; Christensen, Thomas H

    2007-01-01

    A new computer-based life-cycle assessment model (EASEWASTE) has been developed to evaluate resource and environmental consequences of solid waste management systems. This paper describes the landfilling sub-model used in the life-cycle assessment program EASEWASTE, and examines some of the implications of this sub-model. All quantities and concentrations of leachate and landfill gas can be modified by the user in order to bring them in agreement with the actual landfill that is assessed by the model. All emissions, except the generation of landfill gas, are process specific. The landfill gas generation is calculated on the basis of organic matter in the landfilled waste. A landfill assessment example is provided. For this example, the normalised environmental effects of landfill gas on global warming and photochemical smog are much greater than the environmental effects for landfill leachate or for landfill construction. A sensitivity analysis for this example indicates that the overall environmental impact is sensitive to the gas collection efficiency and the use of the gas, but not to the amount of leachate generated, or the amount of soil or liner material used in construction. The landfill model can be used for evaluating different technologies with different liners, gas and leachate collection efficiencies, and to compare the environmental consequences of landfilling with alternative waste treatment options such as incineration or anaerobic digestion.

  10. Modelling of environmental impacts of solid waste landfilling within the life-cycle analysis program EASEWASTE

    International Nuclear Information System (INIS)

    Kirkeby, Janus T.; Birgisdottir, Harpa; Bhander, Gurbakash Singh; Hauschild, Michael; Christensen, Thomas H.

    2007-01-01

    A new computer-based life-cycle assessment model (EASEWASTE) has been developed to evaluate resource and environmental consequences of solid waste management systems. This paper describes the landfilling sub-model used in the life-cycle assessment program EASEWASTE, and examines some of the implications of this sub-model. All quantities and concentrations of leachate and landfill gas can be modified by the user in order to bring them in agreement with the actual landfill that is assessed by the model. All emissions, except the generation of landfill gas, are process specific. The landfill gas generation is calculated on the basis of organic matter in the landfilled waste. A landfill assessment example is provided. For this example, the normalised environmental effects of landfill gas on global warming and photochemical smog are much greater than the environmental effects for landfill leachate or for landfill construction. A sensitivity analysis for this example indicates that the overall environmental impact is sensitive to the gas collection efficiency and the use of the gas, but not to the amount of leachate generated, or the amount of soil or liner material used in construction. The landfill model can be used for evaluating different technologies with different liners, gas and leachate collection efficiencies, and to compare the environmental consequences of landfilling with alternative waste treatment options such as incineration or anaerobic digestion

  11. Environmental impact assessment report

    Energy Technology Data Exchange (ETDEWEB)

    Jung, K. J.; Paik, S. T.; Chung, U. S.; Jung, K. H.; Park, S. K.; Lee, D. G.; Kim, H. R.; Kim, J. K.; Yang, S. H.; Lee, B. J.; Kim, E. H.; Choi, K. S

    2000-10-01

    This report is the revised Environmental Impact Assessment Report which was made and submitted as one of the license documents for TRIGA Research Reactor D and D Project. The Environmental Impact Assessment Report includes introduction of decommissioning plan, status of reactors and environmental impact of surroundings. Also it was assessed and analyzed on radioactivity for environment, and the plan was established to minimize radioactive material release. Finally environmental monitoring plan was established to confirm whether contaminated or not from radioactivity during decommissioning period. According to the assessment results, the risk of excess exposure will be not on environment and public. The first Environmental Impact Assessment Report was submitted to the government for the license and reviewed by Korea Institute of Nuclear Safety. The first Report was revised including answers for the questions arising from review process.

  12. Approaches to accident analysis in recent US Department of Energy environmental impact statements

    International Nuclear Information System (INIS)

    Mueller, C.; Folga, S.; Nabelssi, B.

    1996-01-01

    A review of accident analyses in recent US Department of Energy (DOE) Environmental Impact Statements (EISs) was conducted to evaluate the consistency among approaches and to compare these approaches with existing DOE guidance. The review considered several components of an accident analysis: the overall scope, which in turn should reflect the scope of the EIS; the spectrum of accidents considered; the methods and assumptions used to determine frequencies or frequency ranges for the accident sequences; and the assumption and technical bases for developing radiological and chemical atmospheric source terms and for calculating the consequences of airborne releases. The review also considered the range of results generated with respect to impacts on various worker and general populations. In this paper, the findings of these reviews are presented and methods recommended for improving consistency among EISs and bringing them more into line with existing DOE guidance

  13. Environmental Impact Analysis Process. Final Environmental Impact Statement Supersonic Flight Operations in the Valentine Military Operations Area

    Science.gov (United States)

    1983-11-04

    Federal Activities, U.S. Environmental Protection Agency, Washington, D.C. Sincerely yours,, PD k Whittington , P.E Regional Administrator Enclosure I I I I...many of the residents are deprived , disadvantaged; uninformed and part of a minority); nor is anyone certain the AF will make full restitUtion in light...only wash 217 our home away but would deprive to us of water for the pipelines that supply 217 water over the whole ranch. This reservoir has been here

  14. Environmental impact analysis of batik natural dyes using life cycle assessment

    Science.gov (United States)

    Rinawati, Dyah Ika; Sari, Diana Puspita; Purwanggono, Bambang; Hermawan, Andy Tri

    2017-11-01

    The use of natural dyes for batik dyeing is fewer than synthetic dyes because of its limitations in the application such complexity in manufacture and usage. For ease of use, natural dyes need to be processed into instant products. Extract of natural dyes are generally produced in liquid form that are less practical in long-term use. Dye powder obtained by drying the liquid extract using spray dryer. Production process of liquid natural dye is simpler and require less energy but need more energy for transporting. It is important to know which type of natural dyes should be produced based on their environmental impact. This research aim to compare environmental impact between liquid and powder natural dyes and also to find relative contribution of different stage in life cycle to total environmental impact. The appropriate method to analyze and compare the environmental impacts of powder and liquid natural dyes is Life Cycle Assessment (LCA). The "cradle to grave" approach used to assess environmental impact of powder and liquid natural dyes of Jalawe rind throughout production process of natural dyes, distribution and use of natural dyes for coloring batik. Results of this research show that powder natural dyes has lower environmental impacts than liquid natural dyes. It was found that distribution, mordanting and packaging of liquid dyes have big contribution to environmental impact.

  15. Environmental Impact Analysis Process. Volume 3. Preliminary Final Environmental Impact Statement Construction and Operation of Space Launch Complex 7

    Science.gov (United States)

    1989-10-23

    been introduced into Honda Creek, about two miles north of SLC-6 and about three miles north of the Cypress Ridge, Boathouse Flats, and Vina Terrace...Fish and Wildlife Service, Laguna Niguel Deborah Pontifex, Santa Barbara County APCD, Santa Barbara Jeffrey Harris, Santa Barbara County Resource...on the Channel Islands. In addition, an analysis of acidic deposition into Honda Creek from launch operations was performed. This analysis showed that

  16. Impact of environmental auditing on environmental pollution ...

    African Journals Online (AJOL)

    Impact of environmental auditing on environmental pollution, sustainable development and healthy environment of some organizations in Port Harcourt, Nigeria. ... Journal of Applied Sciences and Environmental Management. Journal Home ...

  17. Establishing the date of Maori environmental impact in New Zealand through pollen analysis and radiocarbon dating

    Energy Technology Data Exchange (ETDEWEB)

    McGlone, M.S.; Wilmshurst, J.M. [Landcare Research, Lincoln, (New Zealand)

    1997-12-31

    Full text: Over the last decade there has been an intense debate about whether New Zealand prehistory is long ( > 1500 years) or short ( < 800 years). Pollen and charcoal analyses have played a key role in this debate by helping to pinpoint the transition from relatively undisturbed environments to those deforested by anthropogenic fires. Problems with in situ contamination, reworking of sediments, confusion of natural with anthropogenic impacts, and different theoretical expectations of growth, spread and impact of early Maori populations have led to disparate conclusions. We review pollen based studies carried out on a variety of fossil sites, including peat bogs, swamps, estuaries and lakes, and contribute new results. Different sedimentary environments show varying susceptibilities to contamination and have resulted in a wide spread of ages for initial Maori impact. Datable materials least susceptible to contamination by old or young carbon are pure peat and macrofossils, whereas lake, swamp and silty sediments are most susceptible. Analysis of the radiocarbon ages obtained for the start of Maori deforestation show that ages falling in the `long` prehistory period are exclusively derived from lake sediments and swamps. In contrast, the bulk of the ages falling in the `short` prehistory period are from pure peat and selected plant fragments. We conclude from our analysis of radiocarbon ages for pollen based deforestation that the first evidence of Maori environmental impact began about 700-550 calendar years BP (1250-1400 AD). Finer age resolution is limited by dating techniques, site limitations and the uncertainty associated with identifying the first signs of human impact. The period we have identified corresponds with the oldest dated archaeological sites and supports the short prehistory hypothesis. We discuss how to distinguish reliable fossil sites from those that have a high risk of giving misleading results.

  18. Establishing the date of Maori environmental impact in New Zealand through pollen analysis and radiocarbon dating

    International Nuclear Information System (INIS)

    McGlone, M.S.; Wilmshurst, J.M.

    1997-01-01

    Full text: Over the last decade there has been an intense debate about whether New Zealand prehistory is long ( > 1500 years) or short ( < 800 years). Pollen and charcoal analyses have played a key role in this debate by helping to pinpoint the transition from relatively undisturbed environments to those deforested by anthropogenic fires. Problems with in situ contamination, reworking of sediments, confusion of natural with anthropogenic impacts, and different theoretical expectations of growth, spread and impact of early Maori populations have led to disparate conclusions. We review pollen based studies carried out on a variety of fossil sites, including peat bogs, swamps, estuaries and lakes, and contribute new results. Different sedimentary environments show varying susceptibilities to contamination and have resulted in a wide spread of ages for initial Maori impact. Datable materials least susceptible to contamination by old or young carbon are pure peat and macrofossils, whereas lake, swamp and silty sediments are most susceptible. Analysis of the radiocarbon ages obtained for the start of Maori deforestation show that ages falling in the 'long' prehistory period are exclusively derived from lake sediments and swamps. In contrast, the bulk of the ages falling in the 'short' prehistory period are from pure peat and selected plant fragments. We conclude from our analysis of radiocarbon ages for pollen based deforestation that the first evidence of Maori environmental impact began about 700-550 calendar years BP (1250-1400 AD). Finer age resolution is limited by dating techniques, site limitations and the uncertainty associated with identifying the first signs of human impact. The period we have identified corresponds with the oldest dated archaeological sites and supports the short prehistory hypothesis. We discuss how to distinguish reliable fossil sites from those that have a high risk of giving misleading results

  19. Environmental impact and cost analysis of coal versus nuclear power: The U.S. case

    International Nuclear Information System (INIS)

    Vujić, Jasmina; Antić, Dragoljub P.; Vukmirović, Zorka

    2012-01-01

    With all energy production systems there are environmental issues to be considered, risks to be assessed, and challenges to be addressed. It must be emphasized that an ideal energy source that is at the same time efficient, cost-effective, environment-friendly, and risk-free does not exist. There are always some necessary trade-offs to be made, in order to ensure optimal use of energy resources, while limiting environmental and health impacts. Nuclear energy is currently the only technology with a secure base-load electricity supply and no greenhouse gas emissions that has the potential to expand at a large scale. However, the spent fuel and safety issues must be addressed. Another base-load electricity source – the fossil-burning power plants – although affordable, emits various air pollutants (chemical and radioactive effluents, dust, ash, etc.), which are dispersed from a power source and transported through various pathways that could lead to the general population exposure. This paper summarizes current status and future trends in base-load electricity sources in the U.S., including environmental footprints, new regulatory requirements, and cost issues. It also presents an analysis of challenges that need to be overcome and opportunities that could us lead us closer to a sustainable energy future.

  20. Spatial Analysis of Environmental Change Impacts on Wheat Production in Mid-Lower North, South Australia

    Energy Technology Data Exchange (ETDEWEB)

    Luo, Q.; Williams, M. [Department of Geographical and Environmental Studies, University of Adelaide, South Australia, 5005 (Australia); Bryan, BV. [Policy and Economic Research Unit, CSIRO Land and Water, Private Bag 2, Glen Osmond, South Australia, 5064 (Australia); Bellotti, W. [School of Agriculture and Wine, University of Adelaide, South Australia, 5371 (Australia)

    2005-09-01

    Three environmental change scenarios (the best scenario, the most likely scenario and the worst scenario) were used by the APSIM (Agricultural Production System sIMulator) Wheat module to study the possible impacts of future environmental change (climate change plus pCO2 change) on wheat production in the Mid-Lower North of South Australia. GIS software was used to manage spatial-climate data and spatial-soil data and to present the results. Study results show that grain yield (kg ha{sup -1}) was adversely affected under the worst environmental change scenario (-100% {approx} -42%) and the most likely environmental change scenario (-58% {approx} -3%). Grain nitrogen content (% N) either increased or decreased depending on the environmental change scenarios used and climate divisions (-25% {approx} +42%). Spatial variability was found for projected impact outcomes within climate divisions indicating the necessity of including the spatial distribution of soil properties in impact assessment.

  1. Defensive technology and welfare analysis of environmental quality change with uncertain consumer health impacts

    International Nuclear Information System (INIS)

    Lee, L.K.; Moffitt, L.J.

    1993-01-01

    Measuring the ex post losses from environmental quality change is an important issue when environmental contamination creates health risks, liability is assigned, and private compensation efforts are required. This paper proposes a methodology for measuring the ex post welfare impact of environmental quality change using market behavior from defensive expenditures. Conditions under which a defensive technology can provide a bound on welfare estimates are identified

  2. Economic and environmental impacts of dietary changes in Iran : an input-output analysis

    NARCIS (Netherlands)

    Rahmani, R.; Bakhshoodeh, M.; Zibaei, M.; Heijman, W.J.M.; Eftekhari, M.H.

    2012-01-01

    Iran's simple and environmentally extended commodity by commodity input-output (IO) model was used to determine the impacts of dietary changes on the Iranian economy and on the environmental load. The original model is based on the status-quo diet and was modified to include the World Health

  3. Environmental Analysis

    Science.gov (United States)

    1980-01-01

    Burns & McDonnell Engineering's environmental control study is assisted by NASA's Computer Software Management and Information Center's programs in environmental analyses. Company is engaged primarily in design of such facilities as electrical utilities, industrial plants, wastewater treatment systems, dams and reservoirs and aviation installations. Company also conducts environmental engineering analyses and advises clients as to the environmental considerations of a particular construction project. Company makes use of many COSMIC computer programs which have allowed substantial savings.

  4. Environmental systems analysis of biogas systems-Part II: The environmental impact of replacing various reference systems

    International Nuclear Information System (INIS)

    Boerjesson, Pal; Berglund, Maria

    2007-01-01

    This paper analyses the overall environmental impact when biogas systems are introduced and replace various reference systems for energy generation, waste management and agricultural production. The analyses are based on Swedish conditions using a life-cycle perspective. The biogas systems included are based on different combinations of raw materials and final use of the biogas produced (heat, power and transportation fuel). A general conclusion is that biogas systems normally lead to environmental improvements, which in some cases are considerable. This is often due to indirect environmental benefits of changed land use and handling of organic waste products (e.g. reduced nitrogen leaching, emissions of ammonia and methane), which often exceed the direct environmental benefits achieved when fossil fuels are replaced by biogas (e.g. reduced emissions of carbon dioxide and air pollutants). Such indirect benefits are seldom considered when biogas is evaluated from an environmental point of view. The environmental impact from different biogas systems can, however, vary significantly due to factors such as the raw materials utilised, energy service provided and reference system replaced

  5. Energy analysis and environmental impacts of a MSW oxy-fuel incineration power plant in China

    International Nuclear Information System (INIS)

    Tang, YuTing; Ma, XiaoQian; Lai, ZhiYi; Chen, Yong

    2013-01-01

    The entire life cycle of a municipal solid waste (MSW) oxy-fuel incineration power plant was evaluated using the method of life cycle assessment (LCA) to identify and quantify the fossil energy requirements and environmental impacts. The functional unit was 1000 kg (1 t) MSW. During the life cycle, the saving standard coal by electricity generation was more than diesel consumption, and the effect of soot and ashes was the greatest among all calculated categorization impacts. The total weighted resource consumption and total weighted environment potential of MSW oxy-fuel incineration were −0.37 mPR 90 (milli person equivalent) and −0.27 PET 2010 (person equivalent), better than MSW incineration with CO 2 capture via monoethanolamine (MEA) absorption. The sensitivity analysis showed that the electric power consumption of air separation unit (ASU) was the primary influencing parameter, and the influence of electric power consumption of CO 2 compressor was secondary, while transport distance had small influence. Overall, MSW oxy-fuel incineration technology has certain development potential with the increment of MSW power supply efficiency and development of ASU in the future. - Highlights: • Life cycle assessment of a MSW oxy-fuel incineration power plant is novel. • The MSW oxy-fuel incineration was better than the MSW incineration with MEA. • Among calculated impacts, the effect of soot and ashes was the greatest. • The electric power consumption of ASU was the primary influencing parameter

  6. Analysis on environmental impact of radiation from metallurgical project for rare metals

    International Nuclear Information System (INIS)

    Xia Zitong; Zhang Baozeng

    2012-01-01

    Rare metals are the composition of many high-property metal materials, which has a wide range of uses in the field of national defense advanced science technology. Since Ta-Nb material is associated radioactive mineral resources, and it contains high radionuclide, resulting in some radioactive indicators in process and workplace of the Ta-Nb smelting projects were significantly higher than that of the surrounding environmental radiation background. Based on the analysis of Ta-Nb smelting projects, the major sources of pollution were identified. and the possible radiation impact of the project was analyzed and evaluated, corrective measures on the process layout were also proposed, and reasonable suggestions of how to optimize the radiation protection were made. (authors)

  7. CERCLA-linked environmental impact and benefit analysis: Evaluating remedial alternatives for the Portland Harbor Superfund Site, Portland, Oregon, USA.

    Science.gov (United States)

    McNally, Amanda D; Fitzpatrick, Anne G; Mirchandani, Sera; Salmon, Matthew; Edwards, Deborah A

    2018-01-01

    This analysis focused on evaluating the environmental consequences of remediation, providing indicators for the environmental quality pillar of 3 "pillars" of the Portland Harbor Sustainability Project (PHSP) framework (the other 2 pillars are economic viability and social equity). The project an environmental impact and benefit analysis (EIBA) and an EIBA-based cost-benefit analysis. Metrics developed in the EIBA were used to quantify and compare remedial alternatives' environmental benefits and impacts in the human and ecological domains, as a result of remedial actions (relative to no action). The cost-benefit results were used to evaluate whether remediation costs were proportionate or disproportionate to the environmental benefits. Alternatives B and D had the highest overall benefit scores, and Alternative F was disproportionately costly relative to its achieved benefits when compared to the other remedial alternatives. Indeed, the costlier alternatives with larger remedial footprints had lower overall EIBA benefit scores-because of substantially more air emissions, noise, and light impacts, and more disturbance to business, recreational access, and habitat during construction-compared to the less costly and smaller alternatives. Put another way, the adverse effects during construction tended to outweigh the long-term benefits, and the net environmental impacts of the larger remedial alternatives far outweighed their small incremental improvements in risk reduction. Results of this Comprehensive Environmental Response Compensation and Liability Act (CERCLA)-linked environmental analysis were integrated with indicators of economic and social impacts of remediation in a stakeholder values-based sustainability framework. These tools (EIBA, EIBA-based cost-benefit analysis, economic impact assessment, and the stakeholder values-based integration) provide transparent and quantitative evaluations of the benefits and impacts associated with remedial alternatives

  8. Environmental Impact Assessment of Rosia Jiu Opencast Area Using AN Integrated SAR Analysis

    Science.gov (United States)

    Poenaru, V. D.; Negula, I. F. Dana; Badea, A.; Cuculici, R.

    2016-06-01

    The satellite data provide a new perspective to analyse and interpret environmental impact assessment as function of topography and vegetation. The main goal of this paper is to investigate the new Staring Spotlight TerraSAR-X mode capabilities to monitor land degradation in Rosia Jiu opencast area taking into account the mining engineering standards and specifications. The second goal is to relate mining activities with spatio-temporal dynamics of land degradation by using differential Synthetic Aperture Radar interferometry (DInSAR). The experimental analysis was carried out on data acquired in the LAN_2277 scientific proposal framework during 2014-2015 period. A set of 25 very height resolution SAR data gathered in the VV polarisation mode with a resolution of 0.45 m x 0.16m and an incidence angle of 37° have been used in this study. Preliminary results showed that altered terrain topography with steep slopes and deep pits has led to the layover of radar signal. Initially, ambiguous results have been obtained due to the highly dynamic character of subsidence induced by activities which imply mass mining methods. By increasing the SAR data number, the land degradation assessment has been improved. Most of the interferometric pairs have low coherence therefore the product coherence threshold was set to 0.3. A coherent and non-coherent analysis is performed to delineate land cover changes and complement the deformation model. Thus, the environmental impact of mining activities is better studied. Moreover, the monitoring of changes in pit depths, heights of stock-piles and waste dumps and levels of tailing dumps provide additional information about production data.

  9. ENVIRONMENTAL IMPACT ASSESSMENT OF ROSIA JIU OPENCAST AREA USING AN INTEGRATED SAR ANALYSIS

    Directory of Open Access Journals (Sweden)

    V. D. Poenaru

    2016-06-01

    Full Text Available The satellite data provide a new perspective to analyse and interpret environmental impact assessment as function of topography and vegetation. The main goal of this paper is to investigate the new Staring Spotlight TerraSAR-X mode capabilities to monitor land degradation in Rosia Jiu opencast area taking into account the mining engineering standards and specifications. The second goal is to relate mining activities with spatio-temporal dynamics of land degradation by using differential Synthetic Aperture Radar interferometry (DInSAR. The experimental analysis was carried out on data acquired in the LAN_2277 scientific proposal framework during 2014-2015 period. A set of 25 very height resolution SAR data gathered in the VV polarisation mode with a resolution of 0.45 m x 0.16m and an incidence angle of 37° have been used in this study. Preliminary results showed that altered terrain topography with steep slopes and deep pits has led to the layover of radar signal. Initially, ambiguous results have been obtained due to the highly dynamic character of subsidence induced by activities which imply mass mining methods. By increasing the SAR data number, the land degradation assessment has been improved. Most of the interferometric pairs have low coherence therefore the product coherence threshold was set to 0.3. A coherent and non-coherent analysis is performed to delineate land cover changes and complement the deformation model. Thus, the environmental impact of mining activities is better studied. Moreover, the monitoring of changes in pit depths, heights of stock-piles and waste dumps and levels of tailing dumps provide additional information about production data.

  10. Proposed Tenaska Washington II Generation Project : Final Environmental Impact Statement. Volume 1: Environmental Analysis and Technical Appendices.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1994-01-01

    BPA is considering whether to purchase electrical power from a proposed privately-owned combustion-turbine electrical generation plant in Washington. The plant would be fired by natural gas and would use combined-cycle technology to generate 240 average megawatts (aMW) of energy. The plant would be developed, owned, and operated by Tenaska Washington Partners II, L.P. The project would be located about 19 kilometers (12 miles) southeast of downtown Tacoma in the Frederickson Industrial Area, Pierce County. The proposed plant would occupy about half of a 6.4-hectare (16-acre) parcel and would be consistent with the industrial character of its surroundings. The proposed site is currently undeveloped and zoned for industrial use by the county. Main environmental concerns identified in the scoping process and in comments on the Draft Environmental Impact Statement (EIS) include: (1) potential air quality impacts, such as emissions and their contribution to the {open_quotes}greenhouse{close_quotes} effect; (2) potential health and safety impacts, such as nuisance odors, plant safety, visibility and heat-emission systems which may affect low-flying planes and potential health effects of electric and magnetic fields; and (3) potential water quality and quantity impacts, such as the amount of wastewater to be discharged, the source and amount of water required for plant operation. These and other issues are discussed in detail in the EIS. The proposed project already includes many features designed to reduce environmental impacts. Based on investigations performed for the EIS, no significant unavoidable adverse environmental impacts associated with the proposed project were identified, and no evidence emerged to suggest that the proposed action is controversial. The EIS is being mailed to numerous agencies, groups, and individuals (see Section 8.0). There will be a 30-day no-action period before any decisions are made and the Record of Decision is signed.

  11. Environmental impact statements: an analysis of six years' experience by seventy federal agencies

    International Nuclear Information System (INIS)

    1976-03-01

    This report assesses federal implementation of the environmental impact statement requirement of the National Environmental Policy Act. The report asks how well the requirement fulfills its purpose of helping government officials reach informed decisions. It considers whether the content and quality of impact statements are adequate; whether complaints about delay from EIS procedures are justified; what purposes may be served by preparing impact statements on broad government programs or groups of projects; whether EIS review by state as well as federal agencies is working well or is in need of improvement; and whether public involvement in the whole process is satisfactory. It also examines some other special questions arising from the EIS requirement

  12. Environment and environmental impacts

    OpenAIRE

    Rejane de Fátima Victor Vasconcelos

    2009-01-01

    The article shows what can be environmental impacts and how those happen, both by the actions made by human kind and by natural disasters. Another concern of the research is the unstoppable incident of the natural resources destruction, result f the globalization actions and the economy, and that the environment impacts have happen in every direction, independently of the geographic scale, harming the life in earth, without giving importance who is the target. The article made reference to in...

  13. Environmental impacts of divorce

    OpenAIRE

    Yu, Eunice; Liu, Jianguo

    2007-01-01

    Divorce is increasingly common around the world. Its causes, dynamics, and socioeconomic impacts have been widely studied, but little research has addressed its environmental impacts. We found that average household size (number of people in a household) in divorced households (households with divorced heads) was 27–41% smaller than married households (households with married heads) in 12 countries across the world around the year 2000 (between 1998 and 2002). If divorced households had combi...

  14. Comparative analysis of energy impacts of traditional and partly electronic environmental auditing: learning from the Japanese automotive industry case

    Directory of Open Access Journals (Sweden)

    Charles Mbohwa

    2008-04-01

    Full Text Available This paper does a comparative analysis and assessment of energy impacts of traditional and partly electronic ISO 14001 environmental management system auditing that using videoconferencing systems. The focus is on the Japanese automotive industry. The idea is to quantify the environmental impacts of auditing and resolve the important question on whether or not the use of information and communication technology (ICT in environmental auditing reduces environmental impacts in ISO 14001 environmental management systems. The main results show that there are no clear energy savings or environmental advantages associated with ICT use in environmental auditing for the set system boundary. However electronic auditing is shown to have clear advantages for stated variables within the model, for example when the distance travelled by the auditors by train and by car is less than 75 km and 17 km per day respectively. A comparison of modes of travel by auditors, shows that rail travel offers the most environmental and energy benefits. It is also noted that travel dominates in terms of energy consumption and environmental burdens compared to all other environmental aspects associated with auditing. The study contributes to knowledge in that among other things, it enables researchers to draw parallels from it applicable to other industrial sectors and other countries. Southern African countries can use this methodology in analysing auditing methods with little or no changes in the model used.

  15. Environmental Impacts and Hotspots of Food Losses: Value Chain Analysis of Swiss Food Consumption.

    Science.gov (United States)

    Beretta, Claudio; Stucki, Matthias; Hellweg, Stefanie

    2017-10-03

    Reducing food losses and waste is crucial to making our food system more efficient and sustainable. This is the first paper that quantifies the environmental impacts of food waste by distinguishing the various stages of the food value chain, 33 food categories that represent the whole food basket in Switzerland, and including food waste treatment. Environmental impacts are expressed in terms of climate change and biodiversity impacts due to water and land use. Climate change impacts of food waste are highest for fresh vegetables, due to the large amounts wasted, while the specific impact per kg is largest for beef. Biodiversity impacts are mainly caused by cocoa and coffee (16% of total) and by beef (12%). Food waste at the end of the food value chain (households and food services) causes almost 60% of the total climate impacts of food waste, because of the large quantities lost at this stage and the higher accumulated impacts per kg of product. The net environmental benefits from food waste treatment are only 5-10% of the impacts from production and supply of the wasted food. Thus, avoiding food waste should be a first-line priority, while optimizing the method of treatment is less relevant.

  16. From Energy to Environmental Analysis : Improving the Resolution of the Environmental Impact of Dutch Private Consumption with Hybrid Analysis

    NARCIS (Netherlands)

    Benders, Rene M. J.; Moll, Henri C.; Nijdam, Durk S.

    Unsustainable private consumption causes energy and environmental problems. This occurs directly (resource depletion and emissions through using cars for transport) or indirectly (purchase of consumer goods and services for which the production uses energy and emits damaging gases). A hybrid energy

  17. Environmental Impact Section

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    The Section is concerned with preparation of environmental statements and assessments and development of assessment methodologies for energy technologies. During 1976, activities involved nuclear, fossil, and geothermal energy; this work was supported by the U.S.Army, HUD, US ERDA, and US NRC. Two special studies--one on the effects of power plant intake structures on fish impingement and another on multiple uses of cooling lakes--were completed and should serve as references for future analyses. Two research projects sponsored by NRC--the Unified Transport Approach (UTA) to Power Plant Assessment and the Environmental Monitoring Data Evaluation Study--were continued. The purpose of the UA program is to develop fast-transient, one- and two-dimensional transport models for estimating thermal, radiological, chemical, and biological impacts in complicated water bodies. The impact of public use of various products that contain radioactive isotope is being evaluated. The Environmental Impact Sections assistance to NRC expanded to include assessments of fuel-fabrication facilities being considered for relicensing and two uranium in-situ solution mining facility proposals. The work for HUD comprises an assessment of the first application of MIUS in a new town development. A generic environmental statement was prepared and an environmental monitoring program for the facility was designed

  18. Safety and environmental impacts

    International Nuclear Information System (INIS)

    Fiege, A.; Kramer, W.

    1991-01-01

    By means of interpreting experimental results, and by means of conservative estimates, several fundamental statements can be made concerning the safety and environmental impacts of fusion plants. Relevant findings so far regarding normal operation and incidents as well as risks involved in raw material extraction and waste management are compiled. (DG) [de

  19. Environmental effects of fuel peat use in Finland. An LCA-based Decision Analysis Impact Assessment

    International Nuclear Information System (INIS)

    Leijting, J.

    1998-02-01

    Finland is a country where the main domestic energy sources are restricted to hydroelectric power, wood and peat from which hydropower is practically utilized fully. The use of peat as energy source has increased drastically since the oil crisis in the beginning of the seventies and the peat exploitation industry is nowadays a significant supplier of labour in Finland. Peat is, in contrast to fossil energy sources, exploited and used as an energy source within the country's borderline. Therefore, all direct extractions and emissions takes place in Finland.The influence of the processes, which occur during the life cycle of fuel peat, on the environment as a whole is yet somewhat unclear. The aim of the study is to map and assess the overall environmental impacts of production and use of fuel peat in Finland and to bring these impacts in relation with total environmental impacts in Finland caused by anthropogenic emissions. The results should be comparable with the impacts of other product life cycles (for instance other fuels). Furthermore, the detection of data gaps which are present is an important element of the study. Research questions are (1) What are the contributions of the different stressors which are emitted during the life cycle of fuel peat in Finland to global and regional environmental impacts? The environmental impacts involved are global impacts like the greenhouse effect as well as regional environmental impacts, e.g.acidification, eutrophication, toxic effects, ozone formation and effects on biodiversity; and (2) What are the contributions expressed per functional unit? Emissions released during the life cycle of fuel peat were inventorized. The emissions were characterized into the various impact categories and a valuation of the various impacts was performed, based on the Decision Analyses Impact Assessment (DAIA). In DAIA, country specific values were applied for estimating the potential of the stressors to cause adverse environmental effects

  20. Environmental impacts of wind-energy projects

    National Research Council Canada - National Science Library

    Committee on Environmental Impacts of Wind Energy Projects; National Research Council; Division on Earth and Life Studies; National Research Council

    2007-01-01

    .... Environmental Impacts of Wind-Energy Projects offers an analysis of the environmental benefits and drawbacks of wind energy, along with an evaluation guide to aid decision-making about projects...

  1. 46 CFR 504.7 - Environmental impact statements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 9 2010-10-01 2010-10-01 false Environmental impact statements. 504.7 Section 504.7... POLICY ANALYSIS § 504.7 Environmental impact statements. (a) General. (1) An environmental impact... environmental impact statements. (1) A draft environmental impact statement (DEIS) will initially be prepared in...

  2. Geothermal environmental impact

    International Nuclear Information System (INIS)

    Armannsson, H.; Kristmannsdottir, H.

    1992-01-01

    Geothermal utilization can cause surface disturbances, physical effects due to fluid withdrawal noise, thermal effects and emission of chemicals as well as affect the communities concerned socially and economically. The environmental impact can be minimized by multiple use of the energy source and the reinjection of spent fluids. The emission of greenhouse gases to the atmosphere can be substantially reduced by substituting geothermal energy for fossil fuels as an industrial energy source wherever possible

  3. Strategies to reduce the environmental impact of an aluminium pressure die casting plant: A scenario analysis

    NARCIS (Netherlands)

    Neto, B.; Kroeze, C.; Hordijk, L.; Costa, C.; Pulles, M.P.J.

    2009-01-01

    This study explores a model (MIKADO) to analyse scenarios for the reduction of the environmental impact of an aluminium die casting plant. Our model calculates the potential to reduce emissions, and the costs associated with implementation of reduction options. In an earlier paper [Neto, B., Kroeze,

  4. System analysis of environmental impacts of the combustion of waste paper

    International Nuclear Information System (INIS)

    Palanterae, R.

    1996-01-01

    Combustion alternatives of different waste paper grades that are unsuitable or difficult to recycle were studied. Environmental impacts of alternative methods of waste paper treatment - combustion, dump disposal and use for fibre raw material - were studied with the aid of system analysis. Use of waste paper for energy production is usually recommended when there is oversupply of waste paper or it is unsuitable for recycled pulp. On the basis of certain studies it has also been suggested that it would be most profitable to use all waste paper as fuel. Refused tight paper rolls, baled brown paper and a mixture of adhesive paper and crushed building waste wood were chosen for waste paper in the combustion tests. The tests were run in the fluidised-bed combustion boiler of Maentaen Energia Oy. The mass flow of paper was about 3 t/h and its proportion of the fuel efficiency on average 20%. Prior to each paper combustion test, a blank trial was run with pure peat. The combustion tests indicated that flue gas emissions are not reduced by using paper instead of peat for energy production, but their composition is changed slightly. When the environmental effects of the use of waste paper for energy were compared with those of landfill dumping, the most significant difference was a reduction in greenhouse gases. The amount of methane emitted from the landfill will reduce. Differences in other emissions, e.g., in acidification due to SO 2 and NO 2 emissions, were rather small. The amount of solid waste was significantly lower in the combustion alternative. (38 refs.)

  5. Effect of replacement of tin doped indium oxide (ITO) by ZnO: analysis of environmental impact categories

    Science.gov (United States)

    Ziemińska-Stolarska, Aleksandra; Barecka, Magda; Zbiciński, Ireneusz

    2017-10-01

    Abundant use of natural resources is doubtlessly one of the greatest challenges of sustainable development. Process alternatives, which enable sustainable manufacturing of valuable products from more accessible resources, are consequently required. One of examples of limited resources is Indium, currently broadly used for tin doped indium oxide (ITO) for production of transparent conductive films (TCO) in electronics industry. Therefore, candidates for Indium replacement, which would offer as good performance as the industrial state-of-the-art technology based on ITO are widely studied. However, the environmental impact of new layers remains unknown. Hence, this paper studies the environmental effect of ITO replacement by zinc oxide (ZnO) by means life cycle assessment (LCA) methodology. The analysis enables to quantify the environmental impact over the entire period of life cycle of products—during manufacturing, use phase and waste generation. The analysis was based on experimental data for deposition process. Further, analysis of different impact categories was performed in order to determine specific environmental effects related to technology change. What results from the analysis, is that ZnO is a robust alternative material for ITO replacement regarding environmental load and energy efficiency of deposition process which is also crucial for sustainable TCO layer production.

  6. 30 CFR 250.261 - What environmental impact analysis (EIA) information must accompany the DPP or DOCD?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What environmental impact analysis (EIA) information must accompany the DPP or DOCD? 250.261 Section 250.261 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Plans and Information Contents of...

  7. Assessing the influence of Environmental Impact Assessments on science and policy: an analysis of the Three Gorges Project.

    Science.gov (United States)

    Tullos, Desiree

    2009-07-01

    The need to understand and minimize negative environmental outcomes associated with large dams has both contributed to and benefited from the introduction and subsequent improvements in the Environmental Impact Assessment (EIA) process. However, several limitations in the EIA process remain, including those associated with the uncertainty and significance of impact projections. These limitations are directly related to the feedback between science and policy, with information gaps in scientific understanding discovered through the EIA process contributing valuable recommendations on critical focus areas for prioritizing and funding research within the fields of ecological conservation and river engineering. This paper presents an analysis of the EIA process for the Three Gorges Project (TGP) in China as a case study for evaluating this feedback between the EIA and science and policy. For one of the best-studied public development projects in the world, this paper presents an investigation into whether patterns exist between the scientific interest (via number of publications) in environmental impacts and (a) the identification of impacts as uncertain or priority by the EIA, (b) decisions or political events associated with the dam, and (c) impact type. This analysis includes the compilation of literature on TGP, characterization of ecosystem interactions and responses to TGP through a hierarchy of impacts, coding of EIA impacts as "uncertain" impacts that require additional study and "priority" impacts that have particularly high significance, mapping of an event chronology to relate policies, institutional changes, and decisions about TGP as "events" that could influence the focus and intensity of scientific investigation, and analysis of the number of publications by impact type and order within the impact hierarchy. From these analyses, it appears that the availability and consistency of scientific information limit the accuracy of environmental impact

  8. Energy and environmental impact analysis of rice cultivation and straw management in northern Thailand.

    Science.gov (United States)

    Yodkhum, Sanwasan; Sampattagul, Sate; Gheewala, Shabbir H

    2018-04-17

    Rice cultivation and energy use for rice production can produce the environmental impacts, especially related to greenhouse gas (GHG) emissions. Also, rice straw open burning by farmers generally practiced after harvesting stage in Thailand for removing the residues in the rice field is associated with emissions of air pollutants, especially particulate matter formation that affects human health and global climate. This study assessed the environmental burdens, consisting of GHG emissions, energy use, and particulate matter formation (PM10), from rice cultivation in Thailand by life cycle assessment (LCA) and compared the environmental burdens of rice straw management scenarios: open burning, incorporation into soil, and direct combustion for electricity generation. The data were collected from the rice production cooperative in Chiang Mai province, northern Thailand, via onsite records and face-to-face questionnaires in 2016. The environmental impacts were evaluated from cradle-to-farm gate. The results showed that the total GHG emissions were 0.64 kg CO 2 -eq per kilogram of paddy rice, the total energy use was 1.80 MJ per kilogram of paddy rice and the PM10 emissions were 0.42 g PM10-eq per kilogram of paddy rice. The results of rice straw management scenarios showed that rice straw open burning had the highest GHG and PM10 emissions. However, rice straw utilization by incorporation into soil and direct combustion for electricity generation could reduce these impacts substantially.

  9. Analysis of the Environmental Impact Assessment (EIA) Directive and the EIA decision in Turkey

    International Nuclear Information System (INIS)

    Bilgin, Ayla

    2015-01-01

    The Environmental Impact Assessment (EIA) Directive first entered into force in the United States in 1969, and began to be implemented in many other countries by 1990. The first Environmental Impact Assessment (EIA) Directive in Turkey was published on February 7, 1993, under the Environmental Law No. 2872. The EIA Directive was revised seven times on June 23, 1997, June 6, 2002, December 16, 2003, July 17, 2008, October 3, 2013, and November 25, 2014. Several amendments were made during this process. The first EIA Directive dated 1993 was narrow in scope and its procedure was long, while the amendments in 2003, 2008, 2013, and 2014 widened the scope of the EIA, and shortened the EIA assessment procedures. In this study, the amendments to the Turkish EIA Directive were analysed, and their effect on the number of EIA decisions made was addressed. It was concluded that the uncertainties in EIA procedures were removed, procedures were shortened, and as a result, the number of EIA decisions increased thanks to the revisions made in line with harmonisation with European Union (EU) acquis. - Highlights: • Demonstrates the Environmental Impact Assessment practices in Turkey. • Demonstrates the application of the EIA in Turkey by sector. • Demonstrates the amendments of the EIA by-laws in Turkey. • Demonstrates the changes in EIA practices and EIA decisions

  10. Analysis of the Environmental Impact Assessment (EIA) Directive and the EIA decision in Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Bilgin, Ayla

    2015-07-15

    The Environmental Impact Assessment (EIA) Directive first entered into force in the United States in 1969, and began to be implemented in many other countries by 1990. The first Environmental Impact Assessment (EIA) Directive in Turkey was published on February 7, 1993, under the Environmental Law No. 2872. The EIA Directive was revised seven times on June 23, 1997, June 6, 2002, December 16, 2003, July 17, 2008, October 3, 2013, and November 25, 2014. Several amendments were made during this process. The first EIA Directive dated 1993 was narrow in scope and its procedure was long, while the amendments in 2003, 2008, 2013, and 2014 widened the scope of the EIA, and shortened the EIA assessment procedures. In this study, the amendments to the Turkish EIA Directive were analysed, and their effect on the number of EIA decisions made was addressed. It was concluded that the uncertainties in EIA procedures were removed, procedures were shortened, and as a result, the number of EIA decisions increased thanks to the revisions made in line with harmonisation with European Union (EU) acquis. - Highlights: • Demonstrates the Environmental Impact Assessment practices in Turkey. • Demonstrates the application of the EIA in Turkey by sector. • Demonstrates the amendments of the EIA by-laws in Turkey. • Demonstrates the changes in EIA practices and EIA decisions.

  11. ENVIRONMENTAL IMPACT ASSESSMENT AND MONITORING ...

    African Journals Online (AJOL)

    protect the environment, it is imperative to conduct environmental impact assessment ... Ethiopia enacted the Environmental Impact Assessment Proclamation in 2002 ... flora, fauna, soil, air, water, climate, natural or cultural heritage, other.

  12. Economic and Environmental Impacts of Dietary Changes in Iran: An Input-Output Analysis

    Directory of Open Access Journals (Sweden)

    Roham Rahmani

    2012-03-01

    Full Text Available  Iran's simple and environmentally extended commodity by commodity input-output (IO model was used to determine the impacts of dietary changes on the Iranian economy and on the environmental load. The original model is based on the status-quo diet and was modified to include the World Health Organization (WHO, the World Cancer Research Fund (WCRF and Mediterranean alternative dietary scenarios. A range of impacts occurred depending upon the relative changes in food items. The direction of changes was similar in the three alternative scenarios. The greatest and smallest impact occurred in the WHO and the Mediterranean scenarios respectively. Total changes in output in WHO, WCRF and Mediterranean dietary scenarios were calculated to be 7010.1, 4802.8 and 3330.8 billion Rials respectively. The outputs of rice, vegetables, fruit, bread and macaroni decreased, but those of live and other animal products increased. The output of non-food commodities and services increased as well. The environmental load increased for three dietary scenarios in comparison with the status-quo diet. The greatest and smallest environmental load occurred in WHO and Mediterranean dietary scenarios respectively. Thus, although dietary changes can have positive effects on economic output, in order to avoid negative environmental effects, it is necessary to consider strategies such as applying capabilities, particularly natural resources in an optimal healthy and environmentally diet, planning for improving forest covering and green space simultaneously with increasing economic activities and using indirect incentives, such as taxes and insurance, for promoting sustainable and healthy foods and reducing greenhouse gas emissions.

  13. Environmental impact assessment of transportation projects: An analysis using an integrated GIS, remote sensing, and spatial modeling approach

    Science.gov (United States)

    El-Gafy, Mohamed Anwar

    Transportation projects will have impact on the environment. The general environmental pollution and damage caused by roads is closely associated with the level of economic activity. Although Environmental Impact Assessments (EIAs) are dependent on geo-spatial information in order to make an assessment, there are no rules per se how to conduct an environmental assessment. Also, the particular objective of each assessment is dictated case-by-case, based on what information and analyses are required. The conventional way of Environmental Impact Assessment (EIA) study is a time consuming process because it has large number of dependent and independent variables which have to be taken into account, which also have different consequences. With the emergence of satellite remote sensing technology and Geographic Information Systems (GIS), this research presents a new framework for the analysis phase of the Environmental Impact Assessment (EIA) for transportation projects based on the integration between remote sensing technology, geographic information systems, and spatial modeling. By integrating the merits of the map overlay method and the matrix method, the framework analyzes comprehensively the environmental vulnerability around the road and its impact on the environment. This framework is expected to: (1) improve the quality of the decision making process, (2) be applied both to urban and inter-urban projects, regardless of transport mode, and (3) present the data and make the appropriate analysis to support the decision of the decision-makers and allow them to present these data to the public hearings in a simple manner. Case studies, transportation projects in the State of Florida, were analyzed to illustrate the use of the decision support framework and demonstrate its capabilities. This cohesive and integrated system will facilitate rational decisions through cost effective coordination of environmental information and data management that can be tailored to

  14. Methodologies of environmental impact assessment

    International Nuclear Information System (INIS)

    Schroll, H.

    1994-01-01

    This article gives a brief introduction covering the objectives of environmental impact assessment (EIA) and sustainable development, before going on to describe the screening procedure to define the environmental and socio-economic impacts of projects. The EIA procedure outlined encompasses a description of the project, examination of all environmental effects (scoping), identification of existing and predicted environmental conditions and impacts, alternative measures and mitigating measures, co-ordination, with environmental regulations, public participation, and monitoring and approval of the EIA. (UK)

  15. Analysis of Embodied Environmental Impacts of Korean Apartment Buildings Considering Major Building Materials

    Directory of Open Access Journals (Sweden)

    Seungjun Roh

    2018-05-01

    Full Text Available Because the reduction in environmental impacts (EIs of buildings using life-cycle assessment (LCA has been emphasized as a practical strategy for the sustainable development of the construction industry, studies are required to analyze not only the operational environmental impacts (OEIs of buildings, but also the embodied environmental impacts (EEIs of building materials. This study aims to analyze the EEIs of Korean apartment buildings on the basis of major building materials as part of research with the goal of reducing the EIs of buildings. For this purpose, six types of building materials (ready-mixed concrete, reinforcement steel, concrete bricks, glass, insulation, and gypsum for apartment buildings were selected as major building materials, and their inputs per unit area according to the structure types and plans of apartment buildings were derived by analyzing the design and bills of materials of 443 apartment buildings constructed in South Korea. In addition, a life-cycle scenario including the production, construction, maintenance, and end-of-life stage was constructed for each major building material. The EEIs of the apartment buildings were quantitatively assessed by applying the life-cycle inventory database (LCI DB and the Korean life-cycle impact assessment (LCIA method based on damage-oriented modeling (KOLID, and the results were analyzed.

  16. Environmental Impact Assessment: A Procedure.

    Science.gov (United States)

    Stover, Lloyd V.

    Prepared by a firm of consulting engineers, this booklet outlines the procedural "whys and hows" of assessing environmental impact, particularly for the construction industry. Section I explores the need for environmental assessment and evaluation to determine environmental impact. It utilizes a review of the National Environmental Policy Act and…

  17. Environmental impact and risk analysis of direct disposal of spent fuel as compared to reprocessing

    International Nuclear Information System (INIS)

    Vuori, S.; Peltonen, E.; Vira, J.

    1984-01-01

    It is important to put the estimated environmental impacts and radiation exposures of alternatives considered into perspective with each other as well as with similar man-made or natural exposures taking into account all the stages of the pertinent fuel cycles and all relevant impact factors. The likely differences in safety between the reprocessing case and the direct disposal case are not very significant taking into account the uncertainties involved in the analyses and the problems of value judgement in the comparison of different types of impacts. Furthermore the difference of costs of measures to achieve a desired level of safety in each case should be considered in view of the other cost impacts arising from the choice of the fuel cycle

  18. Environmental Impact Analysis on Residential Building in Malaysia Using Life Cycle Assessment

    Directory of Open Access Journals (Sweden)

    Ahmad Faiz Abd Rashid

    2017-02-01

    Full Text Available The building industry has a significant impact on the environment due to massive natural resources and energy it uses throughout its life cycle. This study presents a life cycle assessment of a semi-detached residential building in Malaysia as a case study and assesses the environmental impact under cradle-to-grave which consists of pre-use, construction, use, and end-of-life phases by using Centre of Environmental Science of Leiden University (CML 2001. Four impact categories were evaluated, namely, acidification, eutrophication, global warming potential (GWP, and ozone layer depletion (ODP. The building operation under use phase contributed the highest global warming potential and acidification with 2.41 × 103 kg CO2 eq and 1.10 × 101 kg SO2 eq, respectively. In the pre-use phase, concrete in the substructure has the most significant overall impact with cement as the primary raw material. The results showed that the residential building in Malaysia has a fairly high impact in GWP but lower in acidification and ODP compared to other studies.

  19. Evaluation of environmental impact predictions

    International Nuclear Information System (INIS)

    Cunningham, P.A.; Adams, S.M.; Kumar, K.D.

    1977-01-01

    An analysis and evaluation of the ecological monitoring program at the Surry Nuclear Power Plant showed that predictions of potential environmental impact made in the Final Environmental Statement (FES), which were based on generally accepted ecological principles, were not completely substantiated by environmental monitoring data. The Surry Nuclear Power Plant (Units 1 and 2) was chosen for study because of the facility's relatively continuous operating history and the availability of environmental data adequate for analysis. Preoperational and operational fish monitoring data were used to assess the validity of the FES prediction that fish would congregate in the thermal plume during winter months and would avoid the plume during summer months. Analysis of monitoring data showed that fish catch per unit effort (CPE) was generally high in the thermal plume during winter months; however, the highest fish catches occurred in the plume during the summer. Possible explanations for differences between the FES prediction and results observed in analysis of monitoring data are discussed, and general recommendations are outlined for improving impact assessment predictions

  20. Life Cycle Assessment, ExternE and Comprehensive Analysis for an integrated evaluation of the environmental impact of anthropogenic activities

    Energy Technology Data Exchange (ETDEWEB)

    Pietrapertosa, F.; Cosmi, C. [National Research Council, Institute of Methodologies for Environmental Analysis C.N.R.-I.M.A.A. C.da S.Loja, I-85050 Tito Scalo (PZ) (Italy); National Research Council, National Institute for the Physics of Matter, C.N.R.-I.N.F.M. Via Cinthia, I-80126 Naples (Italy); Macchiato, M. [Federico II University, Department of Physical Sciences, Via Cinthia, I-80126 Naples (Italy); National Research Council, National Institute for the Physics of Matter, C.N.R.-I.N.F.M. Via Cinthia, I-80126 Naples (Italy); Salvia, M.; Cuomo, V. [National Research Council, Institute of Methodologies for Environmental Analysis C.N.R.-I.M.A.A. C.da S.Loja, I-85050 Tito Scalo (PZ) (Italy)

    2009-06-15

    The implementation of resource management strategies aimed at reducing the impacts of the anthropogenic activities system requires a comprehensive approach to evaluate on the whole the environmental burdens of productive processes and to identify the best recovery strategies from both an environmental and an economic point of view. In this framework, an analytical methodology based on the integration of Life Cycle Assessment (LCA), ExternE and Comprehensive Analysis was developed to perform an in-depth investigation of energy systems. The LCA methodology, largely utilised by the international scientific community for the assessment of the environmental performances of technologies, combined with Comprehensive Analysis allows modelling the overall system of anthropogenic activities, as well as sub-systems, the economic consequences of the whole set of environmental damages. Moreover, internalising external costs into partial equilibrium models, as those utilised by Comprehensive Analysis, can be useful to identify the best paths for implementing technology innovation and strategies aimed to a more sustainable energy supply and use. This paper presents an integrated application of these three methodologies to a local scale case study (the Val D'Agri area in Basilicata, Southern Italy), aimed to better characterise the environmental impacts of the energy system, with particular reference to extraction activities. The innovative methodological approach utilised takes advantage from the strength points of each methodology with an added value coming from their integration as emphasised by the main results obtained by the scenario analysis. (author)

  1. Analysis of the new ICRP recommendations from the point of view of environmental impact

    International Nuclear Information System (INIS)

    Gonzalez, A.J.

    1978-01-01

    The paper analyses the implications of the new ICRP recommendations referring optimization and justification as they apply to the nuclear power industry, in particular referring to its environmental impact. It also discusses the possible effects of applying this requirements on regional nuclear power programmes. The possibility of extrapolating the ICRP recommendations for use as a basis for nuclear safety aspects of nuclear power reactors is also analyzed. (author)

  2. The comparative analysis of payments for negative environmental impact in Russia and Kazakhstan

    Science.gov (United States)

    Tsibulnikova, M. R.; Ospanov, A. T.; Salata, D. V.; Strelnikova, A. B.

    2015-11-01

    The article represents the calculation of the payment for negative environmental impact caused by the development of the uranium ores deposits in the Republic of Kazakhstan. To compare the deposits in Kazakhstan and the Russian Federation, the event is simulated as if the object were located in the territory of the Russian Federation. The comparison of the results serves as an evidence to substantiate the experts’ claim that the financial mechanism of land management in Russia should be reformed.

  3. Analysis of the Influence of Microcellular Injection Molding on the Environmental Impact of an Industrial Component

    Directory of Open Access Journals (Sweden)

    Daniel Elduque

    2014-09-01

    Full Text Available Microcellular injection molding is a process that offers numerous benefits due to the internal structure generated; thus, many applications are currently being developed in different fields, especially home appliances. In spite of the advantages, when changing the manufacturing process from conventional to microcellular injection molding, it is necessary to analyze its new mechanical properties and the environmental impact of the component. This paper presents a deep study of the environmental behavior of a manufactured component by both conventional and microcellular injection molding. Environmental impact will be evaluated performing a life cycle assessment. Functionality of the component will be also evaluated with samples obtained from manufactured components, to make sure that the mechanical requirements are fulfilled when using microcellular injection molding. For this purpose a special device has been developed to measure the flexural modulus. With a 16% weight reduction, the variation of flexural properties in the microcellular injected components is only 6.8%. Although the energy consumption of the microcellular injection process slightly increases, there is an overall reduction of the environmental burden of 14.9% in ReCiPe and 15% in carbon footprint. Therefore, MuCell technology can be considered as a green manufacturing technology for components working mainly under flexural load.

  4. THE USE OF GEOTECHNOLOGY IN ANALYSIS OF ENVIRONMENTAL IMPACTS IN SALTO VENTOSO (FARROUPILHA/RS

    Directory of Open Access Journals (Sweden)

    Paulo Roberto Teixeira

    2012-03-01

    Full Text Available This paper is the outcome of a survey on environmental impacts due to visitors in a tourist attraction, using geotechnology as a tool. The study was carried out at Salto Ventoso, Farroupilha, Rio Grande do Sul State (Brazil, a tourist attraction with major importance for the region. At the site, a private area, the attraction is a 60 meters (197 feet height cascade and its scenic landscape. Visitors can also hike through the trail that goes behind the waterfall. The trail was mapped using GPS (Global Positioning System and theodolite, and divided into twelve sections, which were evaluated on the issues of declivity, width, damage to natural resources and infrastructure, drainage problems, number of unofficial trails and amount of waste. The results showed that the site presents a series of environmental impacts resulting from both lack of planning and great amount of visitors. Some strategies for managing the site would be the installation of safety and signing infrastructure, as well as a work on environmental awareness of the visitors and their impacts on site.

  5. A dynamic agent-based analysis for the environmental impacts of conventional and novel book retailing.

    Science.gov (United States)

    Xu, Ming; Allenby, Braden; Kim, Junbeum; Kahhat, Ramzy

    2009-04-15

    The dynamics of an e-commerce market and the associated environmental impacts from a bottom-up perspective using an agent-based model is explored. A conceptual meta-theory from psychology is adopted to form the behavioral rules of artificial consumers choosing different methods of buying a book, including conventional bookstores, e-commerce, and a proposed self-pick-up option. Given the energy and emissions savings that result from a shift to e-commerce from bookstore purchase, it appears that reductions in environmental impacts are relatively probable. Additionally, our results suggest that the shift to e-commerce is mainly due to the growth of Internet users, which ties energy and emissions savings to Internet penetration. Moreover, under any scenario, the energy and emissions savings will be provided by the introduction of the proposed self-pick-up option. Our model thus provides insights into market behaviors and related environmental impacts of the growing use of e-commerce systems at the retail level, and provides a basis for the development and implementation of more sustainable policies and practices.

  6. Environmental policy analysis

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    The Environmental Policy Analysis Program was established to improve the formation of energy development and environmental policies with due mutual regard for national environmental and energy development needs. As a separate office under the Assistant Secretary for Environment, the program is implemented by the Director and by Offices of Environmental Policy Analysis in the eight DOE multiprogram laboratories. The program provides the Assistant Secretary with information on alternatives for decision making and early warning of environmental problems and considerations that may affect energy policy decisions. The program is intended to be a continuing activity, with its scope determined progressively as issues are defined. During FY-1977 the program focused on information compilation on levels of Pu and other transuranic elements in soils that would render the area unsafe for unlimited use; the impact of water pollution control laws on energy technologies; an analysis of the comparative health risks associated with various energy technologies; and the cost and related impacts on the nuclear industry arising from changes in radiation standards during the past 15 years

  7. Environmental Impact Analysis Process. Final Environmental Assessment Construction and Operation of Revised PACBAR III Radar Station Saipan, CNMI

    National Research Council Canada - National Science Library

    1987-01-01

    ...). Many project design features have already incorporated environmental concerns. In addition, discussions with Saipan environmental agencies have resulted in mitigation measures, which have been added to the design...

  8. Environmental impact of wind energy

    DEFF Research Database (Denmark)

    Mann, Jakob; Teilmann, Jonas

    2013-01-01

    One purpose of wind turbines is to provide pollution-free electric power at a reasonable price in an environmentally sound way. In this focus issue the latest research on the environmental impact of wind farms is presented. Offshore wind farms affect the marine fauna in both positive and negative...... ways. For example, some farms are safe havens for porpoises while other farms show fewer harbor porpoises even after ten years. Atmospheric computer experiments are carried out to investigate the possible impact and resource of future massive installations of wind turbines. The following questions...... are treated. What is the global capacity for energy production by the wind? Will the added turbulence and reduced wind speeds generated by massive wind farms cool or heat the surface? Can wind farms affect precipitation? It is also shown through life-cycle analysis how wind energy can reduce the atmospheric...

  9. Environmental impact estimation of the sugar cane cultivation, using the methodology of the Life Cycle Analysis (LCA)

    International Nuclear Information System (INIS)

    Saavedra D, Juan Felipe; Vargas V, Olga Rocio

    2000-01-01

    This article describes the results of a Life Cycle Analysis (LCA) for traditional and organic cultivation of sugar cane in Valle del Cauca. Eco-scores obtained for each case, shown that organic cultivation is less harmful, in environmental terms, than traditional one. In the last one, the biomass burning process, made to facilitate the crop, is the principal environmental problem, while in the first one, it is the use of pollinaza, an organic fertilizer based on these results recommendations were made to obtain significant reduction in the impact of the sugar cane cultivation

  10. Technical support document: Energy conservation standards for consumer products: Dishwashers, clothes washers, and clothes dryers including: Environmental impacts; regulatory impact analysis

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    The Energy Policy and Conservation Act as amended (P.L. 94-163), establishes energy conservation standards for 12 of the 13 types of consumer products specifically covered by the Act. The legislation requires the Department of Energy (DOE) to consider new or amended standards for these and other types of products at specified times. This Technical Support Document presents the methodology, data and results from the analysis of the energy and economic impacts of standards on dishwashers, clothes washers, and clothes dryers. The economic impact analysis is performed in five major areas: An Engineering Analysis, which establishes technical feasibility and product attributes including costs of design options to improve appliance efficiency. A Consumer Analysis at two levels: national aggregate impacts, and impacts on individuals. The national aggregate impacts include forecasts of appliance sales, efficiencies, energy use, and consumer expenditures. The individual impacts are analyzed by Life-Cycle Cost (LCC), Payback Periods, and Cost of Conserved Energy (CCE), which evaluate the savings in operating expenses relative to increases in purchase price; A Manufacturer Analysis, which provides an estimate of manufacturers' response to the proposed standards. Their response is quantified by changes in several measures of financial performance for a firm. An Industry Impact Analysis shows financial and competitive impacts on the appliance industry. A Utility Analysis that measures the impacts of the altered energy-consumption patterns on electric utilities. A Environmental Effects analysis, which estimates changes in emissions of carbon dioxide, sulfur oxides, and nitrogen oxides, due to reduced energy consumption in the home and at the power plant. A Regulatory Impact Analysis collects the results of all the analyses into the net benefits and costs from a national perspective. 47 figs., 171 tabs. (JF)

  11. Development and the environmental impact analysis of tidal current energy turbines in China

    Science.gov (United States)

    Liu, Yuxin; Ma, Changlei; Jiang, Bo

    2018-02-01

    Chinese government pays more attentions to renewable energies (RE) in the context of increasing energy demand and climate change problems. As a promising RE, the utilization of marine renewable energy (MRE) is engaging in the world, including the wave energy and tidal current energy mainly. At the same time, the tidal current energy resources in China are abundant. Thus, the utilization of tidal current energy becomes an inevitable choice for China to meet the challenge of global climate change. The Renewable Energy Law (amendment) and “Twelfth Five-Year” Plan of Renewable Energy Development (2011-2015) were released in recent years in China, the tidal current energy are successfully implemented in China, including the R&D and pilot projects. After the summary of the status of tidal current energy converters in recent years in China, especially the devices being in the open sea test. The environmental impact study in China is also introduced in order to offer reference for the environmental impact assessment of tidal current power generation.

  12. 32 CFR 651.23 - Environmental impact statement.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Environmental impact statement. 651.23 Section...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Records and Documents § 651.23 Environmental impact statement. An Environmental Impact statement (EIS) is a detailed written statement required...

  13. Erosion risk analysis by GIS in environmental impact assessments: a case study--Seyhan Köprü Dam construction.

    Science.gov (United States)

    Sahin, S; Kurum, E

    2002-11-01

    Environmental Impact Assessment (EIA) is a systematically constructed procedure whereby environmental impacts caused by proposed projects are examined. Geographical Information Systems (GIS) are crucially efficient tools for impact assessment and their use is likely to dramatically increase in the near future. GIS have been applied to a wide range of different impact assessment projects and dams among them have been taken as the case work in this article. EIA Regulation in force in Turkey requires the analysis of steering natural processes that can be adversely affected by the proposed project, particularly in the section of the analysis of the areas with higher landscape value. At this point, the true potential value of GIS lies in its ability to analyze spatial data with accuracy. This study is an attempt to analyze by GIS the areas with higher landscape value in the impact assessment of dam constructions in the case of Seyhan-Köprü Hydroelectric Dam project proposal. A method needs to be defined before the overlapping step by GIS to analyze the areas with higher landscape value. In the case of Seyhan-Köprü Hydroelectric Dam project proposal of the present work, considering the geological conditions and the steep slopes of the area and the type of the project, the most important natural process is erosion. Therefore, the areas of higher erosion risk were considered as the Areas with Higher Landscape Value from the conservation demands points of view.

  14. Environmental impacts of lighting technologies - Life cycle assessment and sensitivity analysis

    International Nuclear Information System (INIS)

    Welz, Tobias; Hischier, Roland; Hilty, Lorenz M.

    2011-01-01

    With two regulations, 244/2009 and 245/2009, the European Commission recently put into practice the EuP Directive in the area of lighting devices, aiming to improve energy efficiency in the domestic lighting sector. This article presents a comprehensive life cycle assessment comparison of four different lighting technologies: the tungsten lamp, the halogen lamp, the conventional fluorescent lamp and the compact fluorescent lamp. Taking advantage of the most up-to-date life cycle inventory database available (ecoinvent data version 2.01), all life cycle phases were assessed and the sensitivity of the results for varying assumptions analysed: different qualities of compact fluorescent lamps (production phase), different electricity mixes (use phase), and end-of-life scenarios for WEEE recycling versus municipal solid waste incineration (disposal phase). A functional unit of 'one hour of lighting' was defined and the environmental burdens for the whole life cycle for all four lamp types were calculated, showing a clearly lower impact for the two gas-discharge lamps, i.e. the fluorescent and the compact fluorescent lamp. Differences in the product quality of the compact fluorescent lamps reveal to have only a very small effect on the overall environmental performance of this lamp type; a decline of the actual life time of this lamp type doesn't result in a change of the rank order of the results of the here examined four lamp types. It was also shown that the environmental break-even point of the gas-discharge lamps is reached long before the end of their expected life-span. All in all, it can be concluded that a change from today's tungsten lamp technology to a low-energy-consuming technology such as the compact fluorescent lamp results in a substantial environmental benefit.

  15. The environmental Impacts of tobaccos

    International Nuclear Information System (INIS)

    Shah, J.; Sohail, N.

    2006-01-01

    Tobacco is an important cash crop in Pakistan. It is a sensitive plant, prone to bacterial, fungal and viral diseases. Therefore, high levels of pesticides are used to grow tobacco. Many of these pesticides are highly toxic and have profound impacts not only on the smokers but also on the lives of tobacco farmers, their families and the environment. The environmental impacts of tobacco crop start right from its seedlings stage till throwing away of cigarette filters. These impacts are divided into three stages: (a) Environmental impacts at the tobacco growing stage, (b) Environmental impacts at tobacco manufacturing/processing stage, and (c) Environmental impacts of the tobacco use. This paper provides information of environmental impacts of tobacco crop at all the above-mentioned three stages and recommends measures for mitigation. (author)

  16. 32 CFR 989.16 - Environmental impact statement.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Environmental impact statement. 989.16 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.16 Environmental impact statement. (a) Certain classes of environmental impacts normally require preparation of an EIS (40 CFR 1501.4). These include...

  17. Impact of sample size on principal component analysis ordination of an environmental data set: effects on eigenstructure

    Directory of Open Access Journals (Sweden)

    Shaukat S. Shahid

    2016-06-01

    Full Text Available In this study, we used bootstrap simulation of a real data set to investigate the impact of sample size (N = 20, 30, 40 and 50 on the eigenvalues and eigenvectors resulting from principal component analysis (PCA. For each sample size, 100 bootstrap samples were drawn from environmental data matrix pertaining to water quality variables (p = 22 of a small data set comprising of 55 samples (stations from where water samples were collected. Because in ecology and environmental sciences the data sets are invariably small owing to high cost of collection and analysis of samples, we restricted our study to relatively small sample sizes. We focused attention on comparison of first 6 eigenvectors and first 10 eigenvalues. Data sets were compared using agglomerative cluster analysis using Ward’s method that does not require any stringent distributional assumptions.

  18. Automobile - environmental impact

    International Nuclear Information System (INIS)

    Franze, H.

    1993-01-01

    The way balances have been drawn up by business companies until now, they can be regarded as an attempt to develop an instrument for environmental management within the company that makes it possible to examine the ecological effects of the manufactured products during their life cycle. The strong points of such ecobalances can be put to use in the following areas in the future: Information on products and processes obtained through an analysis of the weakest points of the production process can be used for puposes of environmental management. With the aid of such examinations for weak points it then becomes possible to optimise products or processes. Comparative studies extending over years permit an assessment of corporate measures for environment protection and process adjustment. Moreover, ecobalances can serve as a guide for the selection of component concepts. The advantage of a balance related to the whole life cycle lies above all in the fact that the piecemeal studies on energy consumption and waste accumulation by stage can now be replaced by an integral, comprehensive registration of data and processes. (orig./UA) [de

  19. Comparative analysis of environmental impact of S2P (Sunshine to Petrol) system for transportation fuel production

    International Nuclear Information System (INIS)

    Kim, Jiyong; Miller, James E.; Maravelias, Christos T.; Stechel, Ellen B.

    2013-01-01

    Graphical abstract: Display Omitted - Highlights: • We study solar fuels derived from CO 2 and water using the S2P framework. • S2P fuels have lower environmental impact than conventional fuels. • We evaluate the economic, environmental, and social benefits of the S2P framework. - Abstract: A previous study on Sunshine to Petrol (S2P), a technology framework to produce liquid hydrocarbon fuels from CO 2 and water using a concentrated solar energy source, focused on process development as well as economic evaluation. The study herein presents results from a life cycle assessment (LCA) approach to a comparative analysis of the environmental impacts of S2P-derived and petroleum-derived gasoline. Results reveal that S2P gasoline shows lower impact scores than the conventional gasoline for all evaluated impact categories. Based on the LCA results, we then analyze the environmental benefits including greenhouse gas (GHG) mitigation and external cost savings. We find that if S2P gasoline could be successfully introduced to satisfy the gasoline demand of a sample city, Victorville in east California, 3.6 Mt CO 2-eq of the greenhouse gas (GHG) emissions (77% of the total regional emissions) would be mitigated based on the current fleet of vehicles. The lighter impact also corresponds to 4.2 M$ annual cost savings from avoided environment damage. More generally, for each million vehicles running on S2P gasoline there would be nearly $30 M in savings and 335 M gallons of gasoline displaced, which in turn results in nearly 25.8 Mt of CO 2-eq avoided

  20. 78 FR 13082 - Draft Environmental Impact Report/Environmental Impact Statement/Environmental Impact Statement...

    Science.gov (United States)

    2013-02-26

    ...The Bureau of Reclamation has made available for public review and comment the draft Environmental Impact Report/Environmental Impact Statement/Environmental Impact Statement (EIR/EIS/EIS) for the Upper Truckee River Restoration and Marsh Restoration Project (Project). The California Tahoe Conservancy and the Tahoe Regional Planning Agency, the other lead agencies for the Project, made the EIR/EIS/EIS available to the public on February 8, 2013.

  1. Environmental impacts of coal subsidies in Turkey: A general equilibrium analysis

    International Nuclear Information System (INIS)

    Acar, Sevil; Yeldan, A. Erinc

    2016-01-01

    In this study we aim at providing an analytical framework for Turkey to study the macroeconomics and environmental impacts of the existing coal subsidization scheme. To this end we develop a regionally differentiated applied general equilibrium model spanning over 2015–2030. Our analytical apparatus focuses exclusively on the fiscal implications as well as the environmental repercussions of the removal of the subsidies on greenhouse gas emissions. With the aid of a set of alternative policy scenarios against a “business as usual” path, we study the regional and sectorial performances of growth, employment, investment and capital accumulation, consumption/welfare and trade balance. Our results indicate that by simple elimination of the coal subsidization scheme, Turkey can reduce its aggregate gaseous emissions by as much as 5% without a significant loss in its GDP. - Highlights: • Turkey supports the coal sector providing both production and investment subsidies. • Eliminating production subsidies leads to a 2.5% decline in total CO2(eq) by 2030. • Additionally, removal of regional investment subsidies reduces CO2(eq) by 5.4%. • The macro-effects of both scenarios are found to be quite small. • Coal subsidies could be transferred to the financing of green policy alternatives.

  2. Can Parasites Really Reveal Environmental Impact?

    Science.gov (United States)

    This review assesses the usefulness of parasites as bioindicators of environmental impact. Relevant studies published in the past decade were compiled; factorial meta-analysis demonstrated significant effects and interactions between parasite levels and the presence and concentra...

  3. landscape incorporation in the environmental impact studies

    International Nuclear Information System (INIS)

    Gutierrez G, Luz Angela

    2000-01-01

    A general overview on landscape analysis showing the two principal approaches to their study, the article emphasize on the need of taking landscape in consideration on the making of the environmental impact study of any project of development

  4. The analysis on energy and environmental impacts of microalgae-based fuel methanol in China

    International Nuclear Information System (INIS)

    Liu Jing; Ma Xiaoqian

    2009-01-01

    The whole life of methanol fuel, produced by microalgae biomass which is a kind of renewable energy, is evaluated by using a method of life cycle assessment (LCA). LCA has been used to identify and quantify the environment emissions and energy efficiency of the system throughout the whole life cycle, including microalgae cultivation, methanol conversion, transport, and end-use. Energy efficiency, defined as the ratio of the energy of methanol produced to the total required energy, is 1.24, the results indicate that it is plausible as an energy producing process. The environmental impact loading of microalgae-based fuel methanol is 0.187mPET 2000 in contrast to 0.828mPET 2000 for gasoline. The effect of photochemical ozone formation is the highest of all the calculated categorization impacts of the two fuels. Utilization of microalgae an raw material of producing methanol fuel is beneficial to both production of renewable fuels and improvement of the ecological environment. This Fuel methanol is friendly to the environment, which should take an important role in automobile industry development and gasoline fuel substitute

  5. Environmental impact analysis (EIA) concerning lodgepole-pine forestry in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Bengt; Rosvall, O. [Forestry Research Inst. of Sweden, Uppsala (Sweden); Engelmark, O. [Umeaa Univ. (Sweden). Dept. of Ecological Botany; Sjoeberg, K. [Swedish Univ. of Agricultural Sciences, Umeaa (Sweden). Dept. of Animal Ecology

    1999-07-01

    This report presents an analysis of the ecological consequences of forestry with Canadian lodgepole pine introduced into Sweden. The report includes a compilation of present knowledge in the area, research priorities, and proposed measures for dealing with the negative environmental consequences that could arise. The point of departure of the analysis is a description of the properties of lodgepole pine, including species-specific characteristics of the tree, and changes in stand environment and silvicultural management practices that can be expected. The report describes the dispersal capacity of lodgepole pine in its new Swedish environment and the effects of host-parasite interactions. Thereafter, ecological effects on the capacity of the soil for sustainable production and on biological diversity at various scales (tree, stand, landscape) are analysed. Lodgepole pine forestry is also considered in relation to current laws and regulations as well as national and international environmental goals. At the end of the report, a strategy is proposed for handling the inevitable uncertainties associated with the introduction of exotic species.

  6. The GEO-3 Scenarios 2002-2032. Quantification and Analysis of Environmental Impacts

    International Nuclear Information System (INIS)

    Bakkes, J.; Potting, J.; Kemp-Benedict, E.; Raskin, P.; Masui, T.; Rana, A.; Nellemann, C.; Rothman, D.

    2004-01-01

    The four contrasting visions of the world's next three decades as presented in the third Global Environment Outlook (GEO-3) have many implications for policy - from hunger to climate change and from freshwater issues to biodiversity. The four scenarios analysed are Markets First, Policy First, Security First, Sustainability First. Presenting a deeper analysis than the original GEO-3 report, this Technical Report quantifies the impacts of the scenarios for all 19 GEO 'sub-regions', such as Eastern Africa and Central Europe. Regional impacts are discussed in the context of sustainable development. The report summary compares the impacts of the four scenarios across regions - and for the world as a whole - in the light of internationally agreed targets including those in the Millennium Declaration where applicable. It provides an account of the analytical methods, key assumptions, models and other tools, along with the approaches used in the analyses. Based on the methods and results, the report looks back on the process of producing the forward-looking analysis for GEO-3. Were all analytical centres on the same track? Did the approach adopted for GEO-3 contribute to the overall GEO objective of strengthening global-regional involvement and linkages?

  7. The GEO-3 Scenarios 2002-2032. Quantification and Analysis of Environmental Impacts

    Energy Technology Data Exchange (ETDEWEB)

    Bakkes, J.; Potting, J. (eds.) [National Institute for Public Health and the Environment RIVM, Bilthoven (Netherlands); Henrichs, T. [Center for Environmental Systems Research CESR, University of Kassel, Kassel (Germany); Kemp-Benedict, E.; Raskin, P. [Stockholm Environment Institute SEI, Boston, MA (United States); Masui, T.; Rana, A. [National Institute for Environmental Studies NIES, Ibaraki (Japan); Nellemann, C. [United Nations Environment Programme UNEP, GRID Global and Regional Integrated Data centres Arendal, Lillehammer (Norway); Rothman, D. [International Centre for Integrative Studies ICIS, Maastricht University, Maastricht (Netherlands)

    2004-07-01

    The four contrasting visions of the world's next three decades as presented in the third Global Environment Outlook (GEO-3) have many implications for policy - from hunger to climate change and from freshwater issues to biodiversity. The four scenarios analysed are Markets First, Policy First, Security First, Sustainability First. Presenting a deeper analysis than the original GEO-3 report, this Technical Report quantifies the impacts of the scenarios for all 19 GEO 'sub-regions', such as Eastern Africa and Central Europe. Regional impacts are discussed in the context of sustainable development. The report summary compares the impacts of the four scenarios across regions - and for the world as a whole - in the light of internationally agreed targets including those in the Millennium Declaration where applicable. It provides an account of the analytical methods, key assumptions, models and other tools, along with the approaches used in the analyses. Based on the methods and results, the report looks back on the process of producing the forward-looking analysis for GEO-3. Were all analytical centres on the same track? Did the approach adopted for GEO-3 contribute to the overall GEO objective of strengthening global-regional involvement and linkages?.

  8. Environmental risk analysis

    International Nuclear Information System (INIS)

    Lima-e-Silva, Pedro Paulo de

    1996-01-01

    The conventional Risk Analysis (RA) relates usually a certain undesired event frequency with its consequences. Such technique is used nowadays in Brazil to analyze accidents and their consequences strictly under the human approach, valuing loss of human equipment, human structures and human lives, without considering the damage caused to natural resources that keep life possible on Earth. This paradigm was developed primarily because of the Homo sapiens' lack of perception upon the natural web needed to sustain his own life. In reality, the Brazilian professionals responsible today for licensing, auditing and inspecting environmental aspects of human activities face huge difficulties in making technical specifications and procedures leading to acceptable levels of impact, furthermore considering the intrinsic difficulties to define those levels. Therefore, in Brazil the RA technique is a weak tool for licensing for many reasons, and of them are its short scope (only accident considerations) and wrong a paradigm (only human direct damages). A paper from the author about the former was already proposed to the 7th International Conference on Environmetrics, past July'96, USP-SP. This one discusses the extension of the risk analysis concept to take into account environmental consequences, transforming the conventional analysis into a broader methodology named here as Environmental Risk Analysis. (author)

  9. Equity Impacts of Environmental Policy

    OpenAIRE

    Antonio M. Bento

    2013-01-01

    This article surveys recent literature on the equity impacts of environmental policy. We focus on studies that look at the distribution of costs and benefits of alternative environmental policies. We also examine potentially important trade-offs between efficiency and equity that arise in the context of environmental policy, as well as transition effects. In many of the applications surveyed here, environmental policies can be regressive. Strategies are discussed to reduce this regressivity t...

  10. Multi-Temporal Multi-Sensor Analysis of Urbanization and Environmental/Climate Impact in China for Sustainable Urban Development

    Science.gov (United States)

    Ban, Yifang; Gong, Peng; Gamba, Paolo; Taubenbock, Hannes; Du, Peijun

    2016-08-01

    The overall objective of this research is to investigate multi-temporal, multi-scale, multi-sensor satellite data for analysis of urbanization and environmental/climate impact in China to support sustainable planning. Multi- temporal multi-scale SAR and optical data have been evaluated for urban information extraction using innovative methods and algorithms, including KTH- Pavia Urban Extractor, Pavia UEXT, and an "exclusion- inclusion" framework for urban extent extraction, and KTH-SEG, a novel object-based classification method for detailed urban land cover mapping. Various pixel- based and object-based change detection algorithms were also developed to extract urban changes. Several Chinese cities including Beijing, Shanghai and Guangzhou are selected as study areas. Spatio-temporal urbanization patterns and environmental impact at regional, metropolitan and city core were evaluated through ecosystem service, landscape metrics, spatial indices, and/or their combinations. The relationship between land surface temperature and land-cover classes was also analyzed.The urban extraction results showed that urban areas and small towns could be well extracted using multitemporal SAR data with the KTH-Pavia Urban Extractor and UEXT. The fusion of SAR data at multiple scales from multiple sensors was proven to improve urban extraction. For urban land cover mapping, the results show that the fusion of multitemporal SAR and optical data could produce detailed land cover maps with improved accuracy than that of SAR or optical data alone. Pixel-based and object-based change detection algorithms developed with the project were effective to extract urban changes. Comparing the urban land cover results from mulitemporal multisensor data, the environmental impact analysis indicates major losses for food supply, noise reduction, runoff mitigation, waste treatment and global climate regulation services through landscape structural changes in terms of decreases in service area, edge

  11. Air quality analysis for the Western Area Power Administration's 2004 Power Marketing Plan Environmental Impact Statement

    International Nuclear Information System (INIS)

    Glantz, C.S.; Dagle, J.E.; Bilyard, G.R.

    1997-01-01

    The Western Area Power Administration (Western) markets and transmits electric power throughout 15 western states. Western's Sierra Nevada Customer Service Region (Sierra Nevada Region) markets approximately 1,480 megawatts (MW) of firm power (plus 100 MW of seasonal peaking capacity) from the Central Valley Project (CVP) and other resources. Western's mission is to sell and deliver electricity generated from these resources. Western's capacity and energy sales must be in conformance with the laws that govern its sale of electrical power. Further, Western's hydropower operations at each facility must comply with minimum and maximum flows and other constraints set by other regulatory agencies. The Sierra Nevada Region proposes to develop a marketing plan that defines the products and services it would offer beyond the year 2004 and the eligibility and allocation criteria for its electric power resources. Because determining levels of long-term firm power resources to be marketed and subsequently entering into contracts for the delivery of related products and services could be a major Federal action with potentially significant impacts to the human environment, the 2004 Power Marketing Plan Environmental Impact Statement (2004 EIS) is being prepared. Decisions made by the Sierra Nevada Region on how and when to supply power to its customers would influence the operation of power plants within the Western Systems Coordinating Council (WSCC). If the resources affected are thermal resources, this could in turn affect the amount, timing, and location of pollutant emissions to the air at locations throughout the western United States. This report has been produced in conjunction with the 2004 EIS to provide a more detailed discussion of the air quality implications of the 2004 power marketing plan

  12. Quality analysis, miceller behavior, and environmental impact of some laundry detergents available in Bangladesh.

    Science.gov (United States)

    Nur-E-Alam, M; Islam, M Monirul; Islam, M Nazrul; Rima, Farhana Rahman; Islam, M Nurul

    2016-03-01

    The cleansing efficiencies of laundry detergents depend on composition and variation of ingredients such as surfactants, phosphate, and co-builders. Among these ingredients, surfactants and phosphate are considered as hazardous materials. Knowledge on compositions and micellar behavior is very useful for understanding their cleansing efficiencies and environmental impact. With this view, composition, critical micelle concentration, and dissolved oxygen level in aqueous solution of some laundry detergents available in Bangladesh such as keya, Wheel Power White, Tibet, Surf Excel, and Chaka were determined. Surfactant and phosphate were found to be maximum in Surf Excel and Wheel Power White, respectively, while both of the ingredients were found to be minimum in Tibet. The critical micelle concentration decreased with increasing surfactant content. The amount of laundry detergents required for efficient cleansing was found to be minimum for Surf Excel and maximum for Chaka; however, cleansing cost was the highest for Surf Excel and the lowest for Tibet. The maximum amount of surfactants and phosphate was discharged by Surf Excel and Wheel Power White, respectively, while discharges of both of the ingredients were minimum for Tibet. The maximum decrease of dissolved oxygen level was caused by Surf Excel and the minimum by Tibet. Therefore, it can be concluded that Tibet is cost-effective and environment friendly, whereas Surf Excel and Wheel Power White are expensive and pose a threat to water environment.

  13. Risks and environmental impacts

    OpenAIRE

    2014-01-01

    In environmental matters as in other fields, managing a crisis is always more perilous and the results more uncertain than taking preventive measures beforehand. Prevention in environmental matters involves far more than border controls, although those are essential. In New Caledonia perhaps more than elsewhere, an appropriate strategy would also involve monitoring contamination within the territory, particularly island-to-island transfers. Some species may be inoffensive in one part of the t...

  14. Optimizing decentralized renewable energy production by combining potentials and integrated environmental impact analysis. A case study in the Hannover region

    Energy Technology Data Exchange (ETDEWEB)

    Palmas, Claudia; Siewert, Almut [Leibniz Univ. of Hannover (Germany). Dept. of Environmental Planning

    2013-07-01

    In Europe, the integration of decentralized renewable energy production in regional planning processes plays a crucial role. In particular, regions face a major challenge in order to set up renewable decentralized energy systems and incorporate them into the electricity grid. This paper presents a methodological concept and preliminary tests of applications in order to create an optimization model for an improved renewable energy development and planning practice: firstly, the energy potentials of micro renewable resources are estimated, and secondly the outcomes are combined with an estimation of resulting environmental impacts. Including these data into the spatial analysis, different scenarios can be developed in order to support decision making in landscape planning on the basis of environmental and landscape criteria as well as energy issues, including technical aspects and costs. The case study area is the Hannover region. First results show good energy potentials, which will be in a next step evaluated and combined with environmental impacts in order to improve energy efficiency by integrated renewable, decentralized power plants and energy mix. (orig.)

  15. Environmental analysis support

    International Nuclear Information System (INIS)

    Miller, R.L.

    1994-01-01

    Activities in environmental analysis support included assistance to the Morgantown and Pittsburgh Energy Technology Centers (METC and PETC) in reviewing and preparing documents required by the National Environmental Policy Act (NEPA) for several projects selected for the Clean Coal Technology (CCT) Program. A key milestone was the completion for PETC of the final Environmental Impact Statement (EIS) for the Healy Clean Coal Project (HCCP) in Healy, Alaska. This work is notable because it is the first site-specific EIS completed for the CCT Program. Another important activity was the preparation for METC of a draft Environmental Assessment (EA) for the Externally Fired Combined Cycle (EFCC) Project in Warren, Pennsylvania. Also, the final EA was completed for the Gasification Product Improvement Facility (GPIF), a proposed project near Morgantown, West Virginia, which is part of METC's R ampersand D Program. In addition, ORNL staff members published a Technical Memorandum entitled open-quotes Potential Effects of Clean Coal Technologies on Acid Precipitation, Greenhouse Gases, and Solid Waste Disposalclose quotes which documents the findings of three open-quotes white papersclose quotes prepared for DOE/FE

  16. World potential of renewable energies actually accessible in the nineties and environmental impacts analysis

    International Nuclear Information System (INIS)

    Dessus, B.; Devin, B.; Pharabod, F.

    1992-01-01

    The role that renewable energies could play in the world's regional and global energy balances gives rise to varied and often quite different evaluations including almost unbounded ones. Reliable information is still available on the different technologies and their economic costs. But, as the commercial development of these renewables is generally very weak, the arguments for postponing their real possible world and regional impact are frequently confused with short term market type considerations. To overcome that difficulty it is proposed to achieve a comprehensive analysis, region by region, of the actually accessible renewable energies at a given horizon. Then we adopt a methodology as the one employed to derive proven renewable energy reserves from energy renewable resources in which resources are defined by quantitative information on physical potential, when reserves take into account technical and economical accessibility

  17. Environmental Impact Statement Filing Guidance

    Science.gov (United States)

    Describes how to submit an environmental impact statement through the e-NEPA electronic submission system. Describes how EPA submits a notice of availability in to the Federal Register and how the comment time period if set forth.

  18. Environmental impacts of energy utilization

    International Nuclear Information System (INIS)

    Prado, C.P.C. do; Orsini, C.M.Q.; Rodrigues, D.; Barolli, E.; Nogueira, F.R.; Bosco, F.A.R.; Tabacniks, M.H.; Artaxo Netto, P.E.

    1981-04-01

    A survey is done of the available data on the physical environmental impacts in Brazil, derived from energetic systems such as: petroleum, hydroelectricity, firewood, coal, ethanol, methanol and hydrogen. A critical evalution of these data is done with respect to the preservation of the environment. The necessity of studying the environmental impact of the utilization of ethanol, nuclear fuels and coal is stressed. (M.A.) [pt

  19. Health Impacts of Environmental Mycobacteria†

    OpenAIRE

    Primm, Todd P.; Lucero, Christie A.; Falkinham, Joseph O.

    2004-01-01

    Environmental mycobacteria are emerging pathogens causing opportunistic infections in humans and animals. The health impacts of human-mycobacterial interactions are complex and likely much broader than currently recognized. Environmental mycobacteria preferentially survive chlorination in municipal water, using it as a vector to infect humans. Widespread chlorination of water has likely selected more resistant environmental mycobacteria species and potentially explains the shift from M. scrof...

  20. Environmental Impact Assessment in Antarctica

    NARCIS (Netherlands)

    Bastmeijer, C.J.; Roura, R.; Bastmeijer, K.; Koivurova, T.

    2008-01-01

    This publication focuses on the instrument of Environmental Impact Assessment (EIA) that has been developed within the Antarctic Treaty System (ATS) as one of the tools to promote environmental protection. The states involved in the ATS already recognized the importance of this instrument in 1975

  1. Overview of the facility accident analysis for the U.S. Department of Energy Environmental Restoration and Waste Management Programmatic Environmental Impact Statement

    International Nuclear Information System (INIS)

    Mueller, C.; Habegger, L.; Huizenga, D.

    1994-01-01

    An integrated risk-based approach has been developed to address the human health risks of radiological and chemical releases from potential facility accidents in support of the U.S. Department of Energy (DOE) Environmental Restoration and Waste Management (EM) Programmatic Environmental Impact Statement (PEIS). Accordingly, the facility accident analysis has been developed to allow risk-based comparisons of EM PEIS strategies for consolidating the storage and treatment of wastes at different sites throughout the country. The analysis has also been developed in accordance with the latest DOE guidance by considering the spectrum of accident scenarios that could occur in implementing the various actions evaluated in the EM PEIS. The individual waste storage and treatment operations and inventories at each site are specified by the functional requirements defined for each waste management alternative to be evaluated. For each alternative, the accident analysis determines the risk-dominant accident sequences and derives the source terms from the associated releases. This information is then used to perform health effects and risk calculations that are used to evaluate the various alternatives

  2. analysis of the environmental and socio-economic impact of noise

    African Journals Online (AJOL)

    Dr Obe

    Interest in noise control studies is only recent in Nigeria. ... standards for environmental pollution by the Federal ... heaters, gas flare system, reactors, water injection plants, pumps ..... review of health effects of aircraft noise. Aust. NZ J. Public ...

  3. Rainwater harvesting human health and environmental impact assessment and sustainability analysis

    Data.gov (United States)

    U.S. Environmental Protection Agency — LCA/LCCA/LCIA data used to create figures and tables in the papers. This dataset is associated with the following publications: Ghimire, S., and J. Johnston....

  4. Environmental impact assessment screening tool

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities. 2 figs. 7 refs.

  5. Environmental impact assessment screening tool

    International Nuclear Information System (INIS)

    1995-05-01

    An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities

  6. The Xanton-Chassenon II wind farm site - Non technical summary of the impact study, opinion of the environmental authority, public inquiry, additional impact study on avifauna after the opinion of the environmental authority, analysis of chiropterans activity in altitude

    International Nuclear Information System (INIS)

    2013-01-01

    A first document aims at public information and consultation by proposing a synthetic overview of the wind farm project. It presents the involved actors, the methodology adopted to select the site and the project scenario. It describes the actual project (wind turbines, agreement, exploitation duration, compliance with urban planning documents), gives an overview of the results of the impact study (social-economic impacts, impacts on the environment, on landscape and heritage, on acoustics, on health, climate and air quality, and soil and water). It indicates measures aimed at avoiding, reducing or compensating drawbacks. The official opinion of the environmental authority is then provided. The public enquiry process is reported, with a presentation of various studied impacts, an overview of public opinion expressions and of counter-proposals. A detailed additional impact study regarding avifauna is provided as an answer to the opinion of the environmental authority. Another opinion of the environmental authority on the exploitation authorisation request is provided. The last report contains an analysis of chiropterans activity in altitude (methodology, ecological diagnosis)

  7. Evaluating environmental impacts of alternative construction waste management approaches using supply-chain-linked life-cycle analysis.

    Science.gov (United States)

    Kucukvar, Murat; Egilmez, Gokhan; Tatari, Omer

    2014-06-01

    Waste management in construction is critical for the sustainable treatment of building-related construction and demolition (C&D) waste materials, and recycling of these wastes has been considered as one of the best strategies in minimization of C&D debris. However, recycling of C&D materials may not always be a feasible strategy for every waste type and therefore recycling and other waste treatment strategies should be supported by robust decision-making models. With the aim of assessing the net carbon, energy, and water footprints of C&D recycling and other waste management alternatives, a comprehensive economic input-output-based hybrid life-cycle assessment model is developed by tracing all of the economy-wide supply-chain impacts of three waste management strategies: recycling, landfilling, and incineration. Analysis results showed that only the recycling of construction materials provided positive environmental footprint savings in terms of carbon, energy, and water footprints. Incineration is a better option as a secondary strategy after recycling for water and energy footprint categories, whereas landfilling is found to be as slightly better strategy when carbon footprint is considered as the main focus of comparison. In terms of construction materials' environmental footprint, nonferrous metals are found to have a significant environmental footprint reduction potential if recycled. © The Author(s) 2014.

  8. Environmental impact statement law and environmental impact statement administration regulation

    International Nuclear Information System (INIS)

    Feldmann, F.J.

    1991-01-01

    The contribution does not deal with the question - as might be suggested by the heading - that the execution of the environmental impact statement law might be uncertain if there are no further accompanying legal transformatory acts. Putting the environmental impact statements into action is concerned in partiuclar with procedural provisions regarding the Federal Act on Protection against Nuisances and the Atomic Energy Act. The author deals with aspects of the environmental impact statement law and the state-of-the-art achieved so far. He also deals with legislative intent, with further points of putting the law into practice, i.e. the information requirements in the administrative provisions and the integrating aspect, the amalgamating aspect, the requirements made on the state of the environment, and the significance of administrative provisions. Also treated are legal procedures in the Federal Laender and on an international level. (RST) [de

  9. Analysis of Innovation and Its Environmental Impacts on the Chemical Industry

    Directory of Open Access Journals (Sweden)

    Dusan Schreiber

    2016-01-01

    Full Text Available Globalization of the economy and the need to achieve competitiveness drive organizations to invest in technology and in innovation, in order to find solutions that will provide advantages in an ever-more competitive market. The conflict between dwindling natural resources and the demand for economic growth has created a growing need to find means for making environmental conservation compatible with economic growth. The objective of this study is to contribute to the debate by analyzing the innovations implemented by chemical companies in the Sinos Valley region, Rio Grande do Sul, Brazil, and by identifying the motivations that drive them to develop environmental technologies. The study is exploratory and descriptive, with a quantitative data collection component in the form of a survey sent to all chemical companies in the Sinos Valley region, listed in a local business association database. The study results indicate that development of innovations is predominantly of an incremental nature and that novelty is generally restricted to the new-for-firm level. The environmental technologies implemented are generally designed to prevent or remedy environmental damage and are primarily motivated by the need to comply with environmental standards and legislation.

  10. Routeing of power lines through least-cost path analysis and multicriteria evaluation to minimise environmental impacts

    International Nuclear Information System (INIS)

    Bagli, Stefano; Geneletti, Davide; Orsi, Francesco

    2011-01-01

    Least-cost path analysis (LCPA) allows designers to find the 'cheapest' way to connect two locations within a cost surface, which can be computed by combining multiple criteria, and therefore by accounting for different issues (environmental impact, economic investment, etc.). This procedure can be easily implemented with modern Geographic Information System (GIS) technologies, and consequently it has been widely employed to support planning and design of different types of linear infrastructures, ranging from roads to pipelines. This paper presents an approach based on the integration of multicriteria evaluation (MCE) and LCPA to identify the most suitable route for a 132 kV power line. Criteria such as cost, visibility, population density, and ecosystem naturalness were used for the analysis. Firstly, spatial MCE and LCPA were combined to generate cost surfaces, and to identify alternative paths. Subsequently, MCE was used to compare the alternatives, and rank them according to their overall suitability. Finally, a sensitivity analysis allowed the stability of the results to be tested and the most critical factors of the evaluation to be detected. The study found that small changes in the location of the power line start and end points can result in significantly different paths, and consequently impact levels. This suggested that planners should always consider alternative potential locations of terminals in order to identify the best path. Furthermore, it was shown that the use of different weight scenarios may help making the model adaptable to varying environmental and social contexts. The approach was tested on a real-world case study in north-eastern Italy.

  11. Economic and environmental impact analysis of new road network project, connecting the inland metropolitan cities with port city of Karachi in Pakistan

    International Nuclear Information System (INIS)

    Brohi, K.M.; Uqaili, M.A.; Harijan, K.

    2005-01-01

    Most of the developing countries face a lack of infrastructure facilities, where the road transport network is one of them. In this paper, firstly impacts of new road network project connecting with port city and inland metropolitan cities or northwest part of Pakistan are analyzed by using Computable General Equilibrium (CGE) model. Secondly, for the estimation of economic and environmental impacts of this project, a multi-regional CGE model is proposed. It is found that construction of this project is going to change the industrial structure, especially in production of manufacturing sector, and it will also change the Equivalent Variation (EV). It is also observed that remarkable economic and environmental impacts appeared in the inland metropolitan cities or northwest region than the rest of Pakistan. After analysis of these impacts, it is easy for government to make proper policy for maintaining economic impacts and reducing environmental impacts on national and regional level. (author)

  12. Light Rail Transit in Hamilton: Health, Environmental and Economic Impact Analysis

    Science.gov (United States)

    Topalovic, P.; Carter, J.; Topalovic, M.; Krantzberg, G.

    2012-01-01

    Hamilton's historical roots as an electric, industrial and transportation-oriented city provide it with a high potential for rapid transit, especially when combined with its growing population, developing economy, redeveloping downtown core and its plans for sustainable growth. This paper explores the health, environmental, social and economic…

  13. Early Environmental Field Research Career Exploration: An Analysis of Impacts on Precollege Apprentices

    Science.gov (United States)

    Flowers, Susan K.; Beyer, Katherine M.; Pérez, Maria; Jeffe, Donna B.

    2016-01-01

    Research apprenticeships offer opportunities for deep understanding of scientific practice, transparency about research careers, and possible transformational effects on precollege youth. We examined two consecutive field-based environmental biology apprenticeship programs designed to deliver realistic career exploration and connections to…

  14. Analysis of environmental impact due to gaseous wastes releasing during Angra-1 operation

    International Nuclear Information System (INIS)

    Cruz, E.S. da; Kircher, E.

    1986-01-01

    The results of environmental monitoring, carried out in six terrestrial stations around the Angra-1 reactor are presented. The radiation doses were measured using calcium fluoride thermoluminescent dosemeters. A statistical treatment for data obtained by dosemeters to avoid background radiations was done. (M.C.R.) [pt

  15. Impact of environmental dynamics on economic evolution: A stylized agent-based policy analysis

    NARCIS (Netherlands)

    Nannen, V.; van den Bergh, J.C.J.M.; Eiben, A.E.

    2013-01-01

    The general problem of how environmental dynamics affect the behavioral interaction in an evolutionary economy is considered. To this end, a basic model of a dynamic multi-sector economy is developed where the evolution of investment strategies depends on the diversity of these strategies, social

  16. 75 FR 10860 - Preparation of an Alternatives Analysis and Environmental Impact Statement for High Capacity...

    Science.gov (United States)

    2010-03-09

    ..., social, and economic impacts to be analyzed; and (f) the evaluation approach to be used to select the LPA... justice, aesthetics, air quality, noise and vibration, wildlife, vegetation, threatened and endangered...

  17. BIOGAS STATIONS AND THEIR ENVIRONMENTAL IMPACTS

    Directory of Open Access Journals (Sweden)

    Vladimir Lapčik

    2011-12-01

    Full Text Available The article summarizes the authors’ experience with environmental impact assessment in branch of biogas plants. The introductory part of the paper describes legislative obligations of the Czech Republic concerning the fulfilment of the European Union’s limits as for utilization of renewable energy resources. The next parts of the paper deal with an impact analysis of biogas plants on the environment. The final part of the paper deals with experience with implementation of the environmental impact assessment process in the field of biogas plants in the Czech Republic.

  18. Using Satellite Data for Environmental Impact Analysis in Economic Growth: the Case of Mongolia

    Science.gov (United States)

    Tungalag, A.; Tsolmon, R.; Ochirkhuyag, L.; Oyunjargal, J.

    2016-06-01

    The Mongolian economy is based on the primary and secondary economic sectors of agriculture and industry. In addition, minerals and mining become a key sector of its economy. The main mining resources are gold, copper, coal, fluorspar and steel. However, the environment and green economy is one of the big problems among most of the countries and especially for countries like Mongolia where the mining is major part of economy; it is a number one problem. The research of the work tested how environmental elements effect to current Mongolian economic growth, which is growing economy because of mining sector. The study of economic growth but the starting point for any study of economic growth is the neoclassical growth model emphasizing the role of capital accumulation. The growth is analysed either in terms of models with exogenous saving rates (the Solow-Swan model), or models where consumption and hence savings are determined by optimizing individuals. These are the so-called optimal growth or Ramsey-Cass-Koopmans. The study extends the Solow model and the Ramsey-Cass-Koopmans model, including environmental elements which are satellite data determine to degraded land and vegetation value from 1995 to 2013. In contrast, we can see the degraded land area increases from 1995 (4856 m2) to 2013 (10478 m2) and vegetation value decrease at same time. A description of the methodology of the study conducted follows together with the data collected and econometric estimations and calibration with environmental elements.

  19. USING SATELLITE DATA FOR ENVIRONMENTAL IMPACT ANALYSIS IN ECONOMIC GROWTH: THE CASE OF MONGOLIA

    Directory of Open Access Journals (Sweden)

    A. Tungalag

    2016-06-01

    Full Text Available The Mongolian economy is based on the primary and secondary economic sectors of agriculture and industry. In addition, minerals and mining become a key sector of its economy. The main mining resources are gold, copper, coal, fluorspar and steel. However, the environment and green economy is one of the big problems among most of the countries and especially for countries like Mongolia where the mining is major part of economy; it is a number one problem. The research of the work tested how environmental elements effect to current Mongolian economic growth, which is growing economy because of mining sector. The study of economic growth but the starting point for any study of economic growth is the neoclassical growth model emphasizing the role of capital accumulation. The growth is analysed either in terms of models with exogenous saving rates (the Solow-Swan model, or models where consumption and hence savings are determined by optimizing individuals. These are the so-called optimal growth or Ramsey-Cass-Koopmans. The study extends the Solow model and the Ramsey-Cass-Koopmans model, including environmental elements which are satellite data determine to degraded land and vegetation value from 1995 to 2013. In contrast, we can see the degraded land area increases from 1995 (4856 m2 to 2013 (10478 m2 and vegetation value decrease at same time. A description of the methodology of the study conducted follows together with the data collected and econometric estimations and calibration with environmental elements.

  20. Methodology and computational framework used for the US Department of Energy Environmental Restoration and Waste Management Programmatic Environmental Impact Statement accident analysis

    International Nuclear Information System (INIS)

    Mueller, C.; Roglans-Ribas, J.; Folga, S.; Huttenga, A.; Jackson, R.; TenBrook, W.; Russell, J.

    1994-01-01

    A methodology, computational framework, and integrated PC-based database have been developed to assess the risks of facility accidents in support of the US Department of Energy (DOE) Environmental Restoration and Waste Management Programmatic Environmental Impact Statement. The methodology includes the following interrelated elements: (1) screening of storage and treatment processes and related waste inventories to determine risk-dominant facilities across the DOE complex, (2) development and frequency estimation of the risk-dominant sequences of accidents, and (3) determination of the evolution of and final compositions of radiological or chemically hazardous source terms predicted to be released as a function of the storage inventory or treatment process throughput. The computational framework automates these elements to provide source term input for the second part of the analysis which includes (1) development or integration of existing site-specific demographics and meteorological data and calculation of attendant unit-risk factors and (2) assessment of the radiological or toxicological consequences of accident releases to the general public and to the occupational work force

  1. The methodology of environmental impacts assessment of environmentally hazardous facilities

    OpenAIRE

    Adamenko, Yaroslav

    2017-01-01

    The article deals with the methodology of environmental impacts assessment of environmentally hazardous facilities and activities. The stages of evaluation of environmental impacts are proved. The algorithm and technology of decision-making in the system of environmental impact assessments based on a multi-criteria utility theory are proposed.

  2. The Impact of Environmental Regulation on Total Factor Energy Efficiency: A Cross-Region Analysis in China

    Directory of Open Access Journals (Sweden)

    Jianting Lin

    2017-10-01

    Full Text Available Environmental regulations are the key measure by which governments achieve sustainable environmental and economic development. This study aimed to determine the direct and indirect impacts of environmental regulations on total factor energy efficiency of regions in China. Since regions have different levels of economic development and resource endowment, we used the slacks-based measure (SBM-undesirable model to calculate total factor energy efficiency considering regional technology heterogeneity and examined the regional impacts of environmental regulation on this efficiency using the Tobit regression model. A positive direct impact was generated in the eastern region of China by the forced mechanism, which forced enterprises to reduce fossil fuel energy demand and increase clean energy consumption; whereas a negative direct impact was generated in the middle and western regions owing to the green paradox, which is the observation that expected stringent environmental regulation prompts energy owners to accelerate resource extraction. Moreover, indirect impacts through technological progress and foreign direct investment were taken into account in the model, and the results show that the indirect impacts vary across regions. A logical response to these findings would be to develop different policies for different regions.

  3. Environmental impacts of modern agricultural technology diffusion in Bangladesh: an analysis of farmers' perceptions and their determinants.

    Science.gov (United States)

    Rahman, Sanzidur

    2003-06-01

    Farmers' perception of the environmental impacts of modern agricultural technology diffusion and factors determining such awareness were examined using survey data from 21 villages in three agro-ecological regions of Bangladesh. Results reveal that farmers are well aware of the adverse environmental impacts of modern agricultural technology, although their awareness remains confined within visible impacts such as soil fertility, fish catches, and health effects. Their perception of intangible impacts such as, toxicity in water and soils is weak. Level and duration of modern agricultural technology adoption directly influence awareness of its adverse effects. Education and extension contacts also play an important role in raising awareness. Awareness is higher among farmers in developed regions, fertile locations and those with access to off-farm income sources. Promotion of education and strengthening extension services will boost farmers' environmental awareness. Infrastructure development and measures to replenish depleting soil fertility will also play a positive role in raising awareness.

  4. Analysis of impacts from environmental factors evaluated by icf in individuals post-cva

    Directory of Open Access Journals (Sweden)

    Kátia Suely Queiroz Silva Ribeiro

    Full Text Available Abstract Introduction: The CVA is the second cause of death in Brazil, presenting with serious clinical repercussions and as a public health issue. Live with the disabilities caused by it requires facing daily situations, which can increase the disability, such as the ones imposed by the environment inside or outside home. Objective: Analyze the environmental factors of ICF with a facilitator or barrier for victims of Stroke. Materials and methods: A cross-sectional study, 152 individuals; span of less than 60 months involvement and enrolled in the Family Health Units in João Pessoa, Brazil. A questionnaire was used to characterize the socio-economic and clinical form and the Core Set for stroke to identify environmental factors. The data were stored in EpiInfo 7. Associations between environmental factors and the variables age, gender, and marital status verified by chi-square test. Results: Assistive technologies and products or substances for personal consumption were the main factors recognized as facilitators, followed by interpersonal relationships. The most prevalent factors as barriers were the physical structures of public and private spaces, highlighting the physical geography of their residence. It was found that the immediate family was associated with variable marital status, use of products and technology for personal use in daily life was associated with age and, friends partnered with variable gender. Conclusions: The Core Set is shown as a sensitive instrument to capture the barriers and facilitators in population surveys. Their findings point to the need to think about public policy more appropriate for this population.{#}

  5. Analysis of the economic impact of environmental biosafety works projects in healthcare centres in extremadura (spain)

    OpenAIRE

    García Sanz-Calcedo, Justo; Monzón-González, Pedro

    2014-01-01

    The aim of this paper is to analyze the results obtained in the methodological application of techniques aimed at the maintenance of environmental biosafety in works of reform and expansion of healthcare centres in Extremadura, Spain during 2004-2010, assessing the costs of its implementation and contrasting if the use of a BSA project in phase of works affects the probability of nosocomial infection and the conditions of health and safety. The average investment accounted for a cost of 5.5 €...

  6. The analysis of environmental impact in electromagnetic radiation of melting equipment

    International Nuclear Information System (INIS)

    Zhang Baozeng; Xia Zitong

    2012-01-01

    High or medium-frequency electromagnetic melting equipment is always used in metals refining, but it will creates electromagnetic fields of powerful high-frequency in operation. With the development of our national economy and the raising of environmental awareness among the people, the electromagnetic pollution of industrial electromagnetic has aroused great concern in administrative department, analyzing the effects scope and influencing depth of electromagnetic radiation by field monitoring for the electromagnetic melting equipment in a steel mills, this paper discussed the protective key for this project on radiation and putforward some corresponding preventive measures. (authors)

  7. Road ecology in environmental impact assessment

    International Nuclear Information System (INIS)

    Karlson, Mårten; Mörtberg, Ulla; Balfors, Berit

    2014-01-01

    Transport infrastructure has a wide array of effects on terrestrial and aquatic ecosystems, and road and railway networks are increasingly being associated with a loss of biodiversity worldwide. Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are two legal frameworks that concern physical planning, with the potential to identify, predict, mitigate and/or compensate transport infrastructure effects with negative impacts on biodiversity. The aim of this study was to review the treatment of ecological impacts in environmental assessment of transport infrastructure plans and projects. A literature review on the topic of EIA, SEA, biodiversity and transport infrastructure was conducted, and 17 problem categories on the treatment of biodiversity were formulated by means of a content analysis. A review of environmental impact statements and environmental reports (EIS/ER) produced between 2005 and 2013 in Sweden and the UK was then conducted using the list of problems as a checklist. The results show that the treatment of ecological impacts has improved substantially over the years, but that some impacts remain problematic; the treatment of fragmentation, the absence of quantitative analysis and that the impact assessment study area was in general delimited without consideration for the scales of ecological processes. Actions to improve the treatment of ecological impacts could include improved guidelines for spatial and temporal delimitation, and the establishment of a quantitative framework including tools, methods and threshold values. Additionally, capacity building and further method development of EIA and SEA friendly spatial ecological models can aid in clarifying the costs as well as the benefits in development/biodiversity tradeoffs. - Highlights: • The treatment of ecological impacts in EIA and SEA has improved. • Quantitative methods for ecological impact assessment were rarely used • Fragmentation effects were recognized

  8. Road ecology in environmental impact assessment

    Energy Technology Data Exchange (ETDEWEB)

    Karlson, Mårten, E-mail: mkarlso@kth.se; Mörtberg, Ulla, E-mail: mortberg@kth.se; Balfors, Berit, E-mail: balfors@kth.se

    2014-09-15

    Transport infrastructure has a wide array of effects on terrestrial and aquatic ecosystems, and road and railway networks are increasingly being associated with a loss of biodiversity worldwide. Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are two legal frameworks that concern physical planning, with the potential to identify, predict, mitigate and/or compensate transport infrastructure effects with negative impacts on biodiversity. The aim of this study was to review the treatment of ecological impacts in environmental assessment of transport infrastructure plans and projects. A literature review on the topic of EIA, SEA, biodiversity and transport infrastructure was conducted, and 17 problem categories on the treatment of biodiversity were formulated by means of a content analysis. A review of environmental impact statements and environmental reports (EIS/ER) produced between 2005 and 2013 in Sweden and the UK was then conducted using the list of problems as a checklist. The results show that the treatment of ecological impacts has improved substantially over the years, but that some impacts remain problematic; the treatment of fragmentation, the absence of quantitative analysis and that the impact assessment study area was in general delimited without consideration for the scales of ecological processes. Actions to improve the treatment of ecological impacts could include improved guidelines for spatial and temporal delimitation, and the establishment of a quantitative framework including tools, methods and threshold values. Additionally, capacity building and further method development of EIA and SEA friendly spatial ecological models can aid in clarifying the costs as well as the benefits in development/biodiversity tradeoffs. - Highlights: • The treatment of ecological impacts in EIA and SEA has improved. • Quantitative methods for ecological impact assessment were rarely used • Fragmentation effects were recognized

  9. Carbon Break Even Analysis: Environmental Impact of Tablets in Higher Education

    OpenAIRE

    Fadi Safieddine; Imad Nakhoul

    2016-01-01

    With the growing pace of tablets use and the large focus it is attracting especially in higher education, this paper looks at an important aspect of tablets; their carbon footprint. Studies have suggested that tablets have positive impact on the environment; especially since tablets use less energy than laptops or desktops. Recent manufacturers’ reports on the carbon footprint of tablets have revealed that a significant portion, as much as 80%, of the carbon footprint of tablets comes from pr...

  10. Radiation environmental impact assessment of copper exploitation

    International Nuclear Information System (INIS)

    Fan Guang; Wen Zhijian

    2010-01-01

    The radiation environmental impact of mineral exploitation on the surrounding environment has become a public concern. This paper presents the radiation environmental impact assessment of copper exploitation. Based on the project description and detailed investigations of surrounding environment, systematic radiation environmental impacts have been identified. The environmental impacts are assessed during both construction and operation phase. The environmental protection measures have also been proposed. The related conclusion and measures can play an active role in copper exploitation and environmental protection. (authors)

  11. How environmental costs impact DSM

    International Nuclear Information System (INIS)

    Sim, S.R.

    1991-01-01

    This article examines the impacts of environmental costs of electricity generation into utility planning of demand side management (DSM) programs. The topics include approach and assumptions, overview of spreadsheet approach, results of the analyses, and the application of this approach to other areas of utility management such as new generation projects, sales of new generation capacity, and utility liability and management prudency

  12. Environmental Impact Analysis Process. Deployment Area Selection and Land Withdrawal/Acquisition DEIS. Chapter V. Appendices.

    Science.gov (United States)

    1980-12-01

    Cold blooded, backboned, animals which have adapted to live in water and on land. Animal Unit Month (AUM) The amount of forage necessary for the...Nevada. Techn. Rep. Serv. H-W. Hydrol. and Water Resources. Publ. No. 17. DRI, IJniv. Nevada, Reno. Beale, Dl. M., and A. D. Smith, 1970. Forage Use...Impact of Feral Cats and Dogs on Populations of the West Indian Rock Iguana , Cyclura carinata. Biol. Conserv. 14:63-73. Jense, G. K., and J. S. Burruss

  13. Analysis of Maximum Reasonably Foreseeable Accidents for the Yucca Mountain Draft Environmental Impact Statement (DEIS)

    International Nuclear Information System (INIS)

    Ross, S.B.; Best, R.E.; Maheras, S.J.; McSweeney, T.I.

    2001-01-01

    Accidents could occur during the transportation of spent nuclear fuel and high-level radioactive waste. This paper describes the risks and consequences to the public from accidents that are highly unlikely but that could have severe consequences. The impact of these accidents would include those to a collective population and to hypothetical maximally exposed individuals (MEIs). This document discusses accidents with conditions that have a chance of occurring more often than 1 in 10 million times in a year, called ''maximum reasonably foreseeable accidents''. Accidents and conditions less likely than this are not considered to be reasonably foreseeable

  14. Environmental impact of power generation

    International Nuclear Information System (INIS)

    Hester, R.E.; Harrison, R.M.

    1999-01-01

    A series of articles offers answers to questions on the environmental consequences and impact on man of the power generation industry. Subjects discussed in detail include: (i) acid rain and climate change and how the generators of electricity have been expected to play a role disproportionate to their deleterious contributions in improving the situation; (ii) recently adopted air quality management approaches with regard to airborne emissions from power stations and motor vehicles; (iii) the evolution of the UK power industry towards sustainability through considerations for the environment and use of resources in a liberalised market; (iv) the Best Practicable Environmental Option approach to the design and siting of power stations; (v) the environmental impact of nuclear power generation and (vi) electromagnetic fields and the possible effects on man of transmitting electricity in overhead power lines

  15. Lepreau 2 environmental impact statement

    International Nuclear Information System (INIS)

    1984-05-01

    Maritime Nuclear, a joint undertaking of Atomic Energy of Canada Limited and the New Brunswick Electric Power Commission, proposes to construct a second CANDU 600 MW nuclear-powered generating unit at the site of the existing Point Lepreau Generating Station, in New Brunswick. A feasibility study is now underway and guidelines issued by the Lepreau 2 Environmental Assessment Panel identified six priority issues and concerns. These are: impacts on the biological environment, impacts of radiation on humans, impacts on the socio-economic environment, monitoring, emergency planning, and decommissioning. These factors as well as a description of the site and proposed facility are described in this report

  16. Environmental impact assessment of fish farm hatcheries ...

    African Journals Online (AJOL)

    Environmental impact assessment of fish farm hatcheries management in lower ... Environmental impact assessments were taken to determine the causes of ... Of significance of impact assessment were activities like air, traffic, noise, had ...

  17. 76 FR 381 - Notice of Availability of the Draft Environmental Impact Statement/Draft Environmental Impact...

    Science.gov (United States)

    2011-01-04

    ...In accordance with the National Environmental Policy Act of 1969, as amended (NEPA), and the Federal Land Policy and Management Act of 1976, as amended (FLPMA), the Bureau of Land Management (BLM) and the California Public Utilities Commission (CPUC) have prepared a Draft Environmental Impact Statement (EIS), and Draft Environmental Impact Report (EIR) as a joint environmental analysis document for the Iberdrola Renewable/Pacific Wind Development Tule Wind Project (Tule Project) and the San Diego Gas and Electric's (SDG&E) East County Substation Project (ECO Project) and by this notice are announcing the opening of the comment period on the Draft EIS/EIR.

  18. Analysis of environmental impacts of renewable energy on the Moroccan electricity sector: A System Dynamics approach

    Science.gov (United States)

    Chentouf, M.; Allouch, M.

    2018-05-01

    Producing electricity at an affordable price while taking into account environmental concerns has become a major challenge in Morocco. Moreover, the technical and financial issues related to renewable electricity plants are still hindering their efficient integration in the country. In fact, the energy sector (both electricity and heat) accounted for more than half of all Greenhouse Gases (GHG) emissions in the kingdom due to the major reliance on fossil fuels for answering the growing local demand. The key strategies to alleviate this critical situation include the integration of more renewable energies in the total energy mix and the enhancement of energy efficiency measures in different sectors. This paper strives to (1) evaluate the potential of carbon dioxide mitigation in Moroccan electricity sector following the actual and projected strategies and (2) highlight the policy schemes to be taken in order to achieve the ambitious carbon dioxide mitigation targets in the mid-term. A system dynamics model was built in order to simulate different scenarios of carbon dioxide mitigation policies up to 2030. The results shows that the achievement of renewable energies projects by 2030 could save 228.143 MtCO2 between 2020 and 2030 and an additional 18.127 MtCO2 could be avoided in the same period by enhancing energy efficiency measures.

  19. 78 FR 19444 - Pawnee National Grassland, Colorado; Oil and Gas Leasing Analysis Environmental Impact Statement

    Science.gov (United States)

    2013-04-01

    ... Leasing Analysis on the Pawnee National Grassland (PNG), was signed. That decision determined which Lands... National Grassland. Much of the PNG's federal mineral estate made available per the 1997 ROD has already... [36 CFR 228.102(e)]. Accordingly, the PNG finds it is necessary to disclose the potential effects of...

  20. Public Participation Planning of Environmental Impact Assessment (EIA) and Regulations: Analysis of Inconsistency for Some Cases in Indonesia

    Science.gov (United States)

    Hindrayani, Aniek; Purwanto

    2018-02-01

    The failure in community involvement during the environmental documents planning may result in the failure of the planned project implementation. This study aims to determine the gap between practices and regulations that apply to the process of community involvement in the environmental documents planning, and find out inconsistency of implementation on each stakeholder in the planning of the Environmental Impact Assessment (EIA) and the environmental permit. The method used was qualitative through interview and literature study which is analyzed using triangulation model and presented in the form of concept map. The results of the study indicate that 1) the determination of community representatives based on the criteria of the impacted communities is not clearly described, 3) suggestions, opinions, and responses to the environmental impact management are not well implemented by the project proponent, 3) implementation of the environmental management of other licensed activities affecting the behavior (4) stakeholders (project proponent, EIA consultants, and EIA appraisal committee) do not play their role as mandated in applicable legislation.

  1. Public Participation Planning of Environmental Impact Assessment (EIA and Regulations: Analysis of Inconsistency for Some Cases in Indonesia

    Directory of Open Access Journals (Sweden)

    Hindrayani Aniek

    2018-01-01

    Full Text Available The failure in community involvement during the environmental documents planning may result in the failure of the planned project implementation. This study aims to determine the gap between practices and regulations that apply to the process of community involvement in the environmental documents planning, and find out inconsistency of implementation on each stakeholder in the planning of the Environmental Impact Assessment (EIA and the environmental permit. The method used was qualitative through interview and literature study which is analyzed using triangulation model and presented in the form of concept map. The results of the study indicate that 1 the determination of community representatives based on the criteria of the impacted communities is not clearly described, 3 suggestions, opinions, and responses to the environmental impact management are not well implemented by the project proponent, 3 implementation of the environmental management of other licensed activities affecting the behavior (4 stakeholders (project proponent, EIA consultants, and EIA appraisal committee do not play their role as mandated in applicable legislation.

  2. Cost-benefit analysis for environmental impacts and radwaste system for nuclear power plant

    International Nuclear Information System (INIS)

    Mun, K.N.; Yook, C.C.

    1982-01-01

    During operation of nuclear power plant, radioactive material is inevitably formed. This radioactive material must be safely processed by radwaste system so that essentially zero activity is released to the environment. However zero released activity is not really practicable and population doses resulted from released activity are proportional to total annual cost for the radwaste system. In this study, cost-benefit analysis for the radwaste system of the Korean Nuclear Units 5 and 6 is performed to evaluate the optimization between the total annual cost for the radwaste system and population doses within 80 km from the plants. From the analysis, the following results are obtained; 1. the total population dose is estimated 4.04 x 10 3 man-rem/year, 2. total annual cost for the radwaste system is required $ 1.74 x 10 6 , 3. cost-benefit ratio is estimated $ 429/man-rem. (Author)

  3. Comparative analysis of methods for integrating various environmental impacts as a single index in life cycle assessment

    International Nuclear Information System (INIS)

    Ji, Changyoon; Hong, Taehoon

    2016-01-01

    Previous studies have proposed several methods for integrating characterized environmental impacts as a single index in life cycle assessment. Each of them, however, may lead to different results. This study presents internal and external normalization methods, weighting factors proposed by panel methods, and a monetary valuation based on an endpoint life cycle impact assessment method as the integration methods. Furthermore, this study investigates the differences among the integration methods and identifies the causes of the differences through a case study in which five elementary school buildings were used. As a result, when using internal normalization with weighting factors, the weighting factors had a significant influence on the total environmental impacts whereas the normalization had little influence on the total environmental impacts. When using external normalization with weighting factors, the normalization had more significant influence on the total environmental impacts than weighing factors. Due to such differences, the ranking of the five buildings varied depending on the integration methods. The ranking calculated by the monetary valuation method was significantly different from that calculated by the normalization and weighting process. The results aid decision makers in understanding the differences among these integration methods, and, finally, help them select the method most appropriate for the goal at hand.

  4. Comparative analysis of methods for integrating various environmental impacts as a single index in life cycle assessment

    Energy Technology Data Exchange (ETDEWEB)

    Ji, Changyoon, E-mail: changyoon@yonsei.ac.kr; Hong, Taehoon, E-mail: hong7@yonsei.ac.kr

    2016-02-15

    Previous studies have proposed several methods for integrating characterized environmental impacts as a single index in life cycle assessment. Each of them, however, may lead to different results. This study presents internal and external normalization methods, weighting factors proposed by panel methods, and a monetary valuation based on an endpoint life cycle impact assessment method as the integration methods. Furthermore, this study investigates the differences among the integration methods and identifies the causes of the differences through a case study in which five elementary school buildings were used. As a result, when using internal normalization with weighting factors, the weighting factors had a significant influence on the total environmental impacts whereas the normalization had little influence on the total environmental impacts. When using external normalization with weighting factors, the normalization had more significant influence on the total environmental impacts than weighing factors. Due to such differences, the ranking of the five buildings varied depending on the integration methods. The ranking calculated by the monetary valuation method was significantly different from that calculated by the normalization and weighting process. The results aid decision makers in understanding the differences among these integration methods, and, finally, help them select the method most appropriate for the goal at hand.

  5. Environmental impacts of renewable energy. Geographic Information Systems (GIS) based analysis of cumulative effects

    International Nuclear Information System (INIS)

    Rhoden, Henning

    2015-01-01

    The energy transition and thus turning away from fossil fuels and nuclear energy sources is based on an increased expansion of renewable energies. This expansion mainly take place in nature and the landscape, which conflicts with the objectives of the Federal Nature Conservation Act concerning scenery or the consequences of monoculture cultivation of energy crops. What happens, however, if more than one type of renewables occur compressed in a landscape that is investigated in this work. Result from cumulative effects are extended conflict with the objectives of the Federal Nature Conservation Act or possibly have positive effects can be seen? A ''cumulative effect'' is defined as an additive-synergistic overall effect of all a protected interest of respective impact factors. These arise from one or more projects / plans and influence from a variety of ways. As part of the investigations carried out it is clear that extended conflicts may arise in relation to the objectives of the Federal Nature Conservation Act by cumulative effects of renewable energies. To prevent these conflicts, policies and regulations in the context of spatial planning is necessary to enable a focusing of spatial planning for a sustainable expansion of renewable energy. [de

  6. Environmental impacts from the solar energy technologies

    International Nuclear Information System (INIS)

    Tsoutsos, Theocharis; Frantzeskaki, Niki; Gekas, Vassilis

    2005-01-01

    Solar energy systems (photovoltaics, solar thermal, solar power) provide significant environmental benefits in comparison to the conventional energy sources, thus contributing, to the sustainable development of human activities. Sometimes however, their wide scale deployment has to face potential negative environmental implications. These potential problems seem to be a strong barrier for a further dissemination of these systems in some consumers. To cope with these problems this paper presents an overview of an Environmental Impact Assessment. We assess the potential environmental intrusions in order to ameliorate them with new technological innovations and good practices in the future power systems. The analysis provides the potential burdens to the environment, which include - during the construction, the installation and the demolition phases, as well as especially in the case of the central solar technologies - noise and visual intrusion, greenhouse gas emissions, water and soil pollution, energy consumption, labour accidents, impact on archaeological sites or on sensitive ecosystems, negative and positive socio-economic effects

  7. A Pattern Analysis of Daily Electric Vehicle Charging Profiles: Operational Efficiency and Environmental Impacts

    Directory of Open Access Journals (Sweden)

    Ranjit R. Desai

    2018-01-01

    Full Text Available Plug-in Electric Vehicles (PEVs are considered one solution to reducing GHG emissions from private transport. Additionally, PEV adopters often have free access to public charging facilities. Through a pattern analysis, this study identifies five distinct clusters of daily PEV charging profiles observed at the public charging stations. Empirically observed patterns indicate a significant amount of operational inefficiency, where 54% of the total parking duration PEVs do not consume electricity, preventing other users from charging. This study identifies the opportunity cost in terms of GHG emissions savings if gasoline vehicles are replaced with potential PEV adopters. The time spent in parking without charging by current PEV users can be used by these potential PEV users to charge their PEVs and replace the use of gasoline. The results suggest that reducing inefficient station use leads to significant reductions in emissions. Overall, there is significant variability in outcomes depending on the specific cluster membership.

  8. Preliminary analysis of the safety and environmental impact of the Tritium Systems Test Assembly

    International Nuclear Information System (INIS)

    Carlson, R.V.; Jalbert, R.A.

    1980-01-01

    The Tritium Systems Test Assembly (TSTA) is a facility dedicated to the development of technologies associated with the D-T fuel cycle of future fusion reactors while demonstrating that TSTA can be operated safely with no significant losses to the environment. During the initial design stage of TSTA, a safety analysis was performed which investigated the effects of major subsystem component failure, the meteorology and seismicity of the site and their possible effect on the facility, and accident scenarios which result in tritium releases. Major releases of tritium to the environment are considered highly improbable since they require a compound failure of primary and secondary containment, along with either a breach of the building or a failure of the Emergency Tritium Cleanup system. Accidental releases caused by natural phenomena (earthquake, tornado, etc.) are considered highly improbable

  9. Projected photovoltaic energy impacts on US CO2 emissions: an integrated energy environmental-economic analysis

    International Nuclear Information System (INIS)

    Lee, J.C.; Fthenakis, V.M.; Morris, S.C.; Goldstein, G.A.; Moskowitz, P.D.

    1997-01-01

    The potential role of photovoltaic technologies in reducing carbon dioxide (CO 2 ) emissions in the USA was evaluated using an energy-environment-economic systems model. With a range of assumptions about future scenarios up to 2030, the model results provide an objective quantitative assessment of the prospects for photovoltaics in a competitive market. With the projected improvements in cost and efficiency, photovoltaics will compete favourably as a general source of electricity supply to the grid by about 2010 in southwestern USA. This analysis indicates that photovoltaics has the potential to reach a total installed capacity of 140 GW by the year 2030, and to displace a cumulative 450 million metric tons of carbon emissions from 1995 to 2030. At the projected 2030 capacity, photovoltaics could displace over 64 million metric tons of carbon emissions a year. Under constraints on carbon emissions, photovoltaics becomes more cost effective and would further reduce carbon emissions from the US energy system. (author)

  10. LC-MS metabolomic analysis of environmental stressor impacts on the metabolite diversity in Nephthea spp.

    Directory of Open Access Journals (Sweden)

    Hedi Indra Januar

    2012-01-01

    Full Text Available Context: The soft coral Nephthea spp. is a source of terpenoid class that potentially has pharmaceutical properties. However, metabolite diversity and cytotoxic activity of this species are varied among coral reefs from various sites. Aim: To analyze the water quality in Nephthea spp. environment as a possible factor causing a difference in its metabolite diversity. Settings and Design: Nephthea spp. from seven sites were taken in October 2010 at the Alor District of Marine Protected Area, Indonesia. Materials and Methods: Water quality assessment was analyzed in situ and indexed by Canadian Council of Ministry Environment-Water Quality Index (CCME-WQI method. Meanwhile, metabolite diversity was analyzed by a LC-MS metabolomic method, using C18 reversed phase and gradient water-acetonitrile system. Statistical Analysis Used: Spearman′s rho and regression analysis were applied to correlate the water quality index to ecological index (richness, diversity, and evenness from LC-MS results. Results: The water quality index had a significant positive correlation and strong linear regression determinant to the total metabolite (R 2 = 0.704, particularly to semipolar metabolite richness (R 2 = 0.809, the area of terpenoid class in the organism. Conclusion: It can be concluded that water quality may serve as a major factor that affects the amount of richness in Nephthea spp. metabolites. When the water quality is lower, as environment stresses increases, it may affect the metabolite richness within direct disrupt of metabolite biosynthesis or indirect ecological means. Terpenoids are known as a soft coral antipredator (coral fishes, the amount of which depends on the water quality.

  11. Incorporating environmental justice measures during environmental impact statement scoping

    International Nuclear Information System (INIS)

    Imam, J.; Poles, J.S.

    1995-01-01

    Executive Order 12898, open-quote Federal Actions to Address Environmental Justice in Minority Populations and Low-Income populations,close-quote directs Federal agencies to make environmental justice part of their mission by involving minorities and low-income populations and by identifying and addressing as appropriate disproportionately high and adverse human health and environmental effects of their programs, policies, and activities on minority and low-income populations. In the Presidential Memorandum transmitting the Executive Order it was stated that environmental justice should be taken into consideration under the National Environmental Policy Act of 1969 (NEPA). NEPA, with its systematic approach and requirements for alternatives analysis and comprehensive public participation, has served as one of the main mechanisms for involving the public in environmental decision-making. This paper addresses challenges faced by the Department of Energy in involving minority and low-income populations in the public involvement activities associated with a national-level environmental impact statement (EIS) and suggests ways to improve agencies' incorporation of environmental justice considerations in NEPA scoping

  12. Using reclaimed lumber and wood flooring in construction : measuring environmental impact using life-cycle inventory analysis

    Science.gov (United States)

    Richard D. Bergman; Hongmei Gu; Robert H. Falk; Thomas R. Napier

    2010-01-01

    With green building concepts becoming widespread in the construction field, building practices and materials are being examined for their environmental impact. Reusing building materials has a distinct advantage over using newly manufactured materials because these reclaimed materials avoid greenhouse gas emissions associated with new (virgin) material manufacturing....

  13. NRC analysis of the environmental impacts and licensing policies for expanded spent fuel storage in the United States

    International Nuclear Information System (INIS)

    Smith, C.V. Jr.

    1978-01-01

    This paper reviews the findings of the U.S. environmental impact studies on spent fuel storage to the year 2000, addresses design criteria for independent spent fuel storage installations and expresses the position of the NRC for licensing expanded spent fuel storage capabilities until such time as final solutions are established

  14. NRC Analysis of the environmental impacts and licensing policies for expanded spent fuel storage in the United States

    International Nuclear Information System (INIS)

    Clifford, V.S.

    1978-01-01

    The findings of the U.S. environmental impact studies on spent fuel storage to the year 2000 are reviewed, the design criteria for independent spent fuel storage installations are addressed and the position of the NRC for licensing expanded spent fuel storage capabilities, until such time as final solutions are established, is expressed. (author)

  15. Regional impacts of environmental regulations and technical change in the US forestry sector: a multiregional CGE analysis

    Science.gov (United States)

    Gouranga G. Das; Janki R.R. Alavalapati; Douglas R. Carter; Marions E. Tsigas

    2005-01-01

    In this paper, a multiregional computable general equilibrium model, which divides the United States (US) into four broad geographical regions and aggregates other nations into the rest of the world, is used to analyze the effects associated with environmental and technological policy shifts in the US forest sector. In particular, we analyze the impacts of: (i) a 20%...

  16. Lifetime environmental impact of buildings

    CERN Document Server

    Mequignon, Marc

    2014-01-01

    This work discusses the impact of the life of buildings on? sustainable development methods.?The study of the lifespan of the building is used to assess and?manage the environmental impacts associated?with all the stages of a product's life, from raw material extraction?through to repair, maintenance and?? 'end of life' scenarios. While several papers have discussed thegreenhouse gas emissions of buildings,?less research has been done on how these are affected by the lifespan?of the building. This book serves to?highlight the pertinence of this factor and contributes to providing?new ideas on

  17. The environmental impact of reprocessing

    International Nuclear Information System (INIS)

    Mummery, P.W.; Howells, H.; Scriven, A.

    1980-01-01

    The subject is discussed under the headings: introduction; basis of hazard assessment (dose limits - ICRP recommendations; biological radiation effects); comparison of standards and practice in the UK and USA in the limitation of exposure of the public as a consequence of discharges of radioactive effluent to the environment; nature of reprocessing operations (Thermal Oxide Fuel Reprocessing Plant (THORP); storage ponds; fuel shearing; leaching; clarification; solvent extraction; finishing); waste management (liquids, solids, gases); waste discharges; environmental impact of normal operations (identification of the critical groups; exposure of critical groups; risks and exposures, occupational and collective); environmental impact of accidents (risk - probability multiplied by consequence of the event; types of accident considered); conclusion. (U.K.)

  18. Environmental impact efficiency of natural gas combined cycle power plants: A combined life cycle assessment and dynamic data envelopment analysis approach.

    Science.gov (United States)

    Martín-Gamboa, Mario; Iribarren, Diego; Dufour, Javier

    2018-02-15

    The energy sector is still dominated by the use of fossil resources. In particular, natural gas represents the third most consumed resource, being a significant source of electricity in many countries. Since electricity production in natural gas combined cycle (NGCC) plants provides some benefits with respect to other non-renewable technologies, it is often seen as a transitional solution towards a future low‑carbon power generation system. However, given the environmental profile and operational variability of NGCC power plants, their eco-efficiency assessment is required. In this respect, this article uses a novel combined Life Cycle Assessment (LCA) and dynamic Data Envelopment Analysis (DEA) approach in order to estimate -over the period 2010-2015- the environmental impact efficiencies of 20 NGCC power plants located in Spain. A three-step LCA+DEA method is applied, which involves data acquisition, calculation of environmental impacts through LCA, and the novel estimation of environmental impact efficiency (overall- and term-efficiency scores) through dynamic DEA. Although only 1 out of 20 NGCC power plants is found to be environmentally efficient, all plants show a relatively good environmental performance with overall eco-efficiency scores above 60%. Regarding individual periods, 2011 was -on average- the year with the highest environmental impact efficiency (95%), accounting for 5 efficient NGCC plants. In this respect, a link between high number of operating hours and high environmental impact efficiency is observed. Finally, preliminary environmental benchmarks are presented as an additional outcome in order to further support decision-makers in the path towards eco-efficiency in NGCC power plants. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Environmental impact of heavy pig production in a sample of Italian farms. A cradle to farm-gate analysis

    Energy Technology Data Exchange (ETDEWEB)

    Pirlo, G., E-mail: giacomo.pirlo@crea.gov.it [Council for Agricultural Research and Economics, Fodder and Dairy Production Research Centre, Via A. Lombardo 11, 26900 Lodi (Italy); Carè, S. [Council for Agricultural Research and Economics, Fodder and Dairy Production Research Centre, Via A. Lombardo 11, 26900 Lodi (Italy); Casa, G. Della; Marchetti, R.; Ponzoni, G.; Faeti, V. [Council for Agricultural Research and Economics, Research Unit for Swine Husbandry, Via Beccastecca 345, San Cesario sul Panaro, 41018 (Italy); Fantin, V.; Masoni, P.; Buttol, P. [ENEA, Italian National Agency for New Technologies, Energy and Sustainable Economic Development, Via Martiri di Monte Sole 4, 40129 Bologna (Italy); Zerbinatti, L. [Associazione Regionale Allevatori dell' Emilia Romagna, Via Roma 89/2—Loc. Viadagola, 40057 Granarolo dell' Emilia (Italy); Falconi, F. [LCA-lab SRL, Bologna (Italy)

    2016-09-15

    Four breeding piggeries and eight growing-fattening piggeries were analyzed to estimate potential environmental impacts of heavy pig production (> 160 kg of live height at slaughtering). Life Cycle Assessment methodology was adopted in the study, considering a system from breeding phase to growing fattening phase. Environmental impacts of breeding phase and growing-fattening phase were accounted separately and then combined to obtain the impacts of heavy pig production. The functional unit was 1 kg of live weight gain. Impact categories investigated were global warming (GW), acidification (AC), eutrophication (EU), abiotic depletion (AD), and photochemical ozone formation (PO). The total environmental impact of 1 kg of live weight gain was 3.3 kg CO{sub 2}eq, 4.9 E − 2 kg SO{sub 2}eq, 3.1 E − 2 kg PO{sub 4}{sup 3−} eq, 3.7 E − 3 kg Sbeq, 1.7 E − 3 kg C{sub 2}H{sub 4}eq for GW, AC, EU, AD, and PO respectively. Feed production was the main hotspot in all impact categories. Greenhouse gases responsible for GW were mainly CH{sub 4}, N{sub 2}O, and CO{sub 2}. Ammonia was the most important source of AC, sharing about 90%. Nitrate and NH{sub 3} were the main emissions responsible for EU, whereas P and NOx showed minor contributions. Crude oil and natural gas consumption was the main source of AD. A large spectrum of pollutants had a significant impact on PO: they comprised CH{sub 4} from manure fermentation, CO{sub 2} caused by fossil fuel combustion in agricultural operations and industrial processes, ethane and propene emitted during oil extraction and refining, and hexane used in soybean oil extraction. The farm characteristics that best explained the results were fundamentally connected with performance indicators Farms showed a wide variability of results, meaning that there was wide margin for improving the environmental performance of either breeding or growing-fattening farms. The effectiveness of some mitigation measures was evaluated and the results

  20. Environmental impact of heavy pig production in a sample of Italian farms. A cradle to farm-gate analysis

    International Nuclear Information System (INIS)

    Pirlo, G.; Carè, S.; Casa, G. Della; Marchetti, R.; Ponzoni, G.; Faeti, V.; Fantin, V.; Masoni, P.; Buttol, P.; Zerbinatti, L.; Falconi, F.

    2016-01-01

    Four breeding piggeries and eight growing-fattening piggeries were analyzed to estimate potential environmental impacts of heavy pig production (> 160 kg of live height at slaughtering). Life Cycle Assessment methodology was adopted in the study, considering a system from breeding phase to growing fattening phase. Environmental impacts of breeding phase and growing-fattening phase were accounted separately and then combined to obtain the impacts of heavy pig production. The functional unit was 1 kg of live weight gain. Impact categories investigated were global warming (GW), acidification (AC), eutrophication (EU), abiotic depletion (AD), and photochemical ozone formation (PO). The total environmental impact of 1 kg of live weight gain was 3.3 kg CO_2eq, 4.9 E − 2 kg SO_2eq, 3.1 E − 2 kg PO_4"3"− eq, 3.7 E − 3 kg Sbeq, 1.7 E − 3 kg C_2H_4eq for GW, AC, EU, AD, and PO respectively. Feed production was the main hotspot in all impact categories. Greenhouse gases responsible for GW were mainly CH_4, N_2O, and CO_2. Ammonia was the most important source of AC, sharing about 90%. Nitrate and NH_3 were the main emissions responsible for EU, whereas P and NOx showed minor contributions. Crude oil and natural gas consumption was the main source of AD. A large spectrum of pollutants had a significant impact on PO: they comprised CH_4 from manure fermentation, CO_2 caused by fossil fuel combustion in agricultural operations and industrial processes, ethane and propene emitted during oil extraction and refining, and hexane used in soybean oil extraction. The farm characteristics that best explained the results were fundamentally connected with performance indicators Farms showed a wide variability of results, meaning that there was wide margin for improving the environmental performance of either breeding or growing-fattening farms. The effectiveness of some mitigation measures was evaluated and the results that could be obtained by their introduction have been

  1. Environmental and health impacts of using food waste as animal feed: a comparative analysis of food waste management options.

    Science.gov (United States)

    Salemdeeb, Ramy; Zu Ermgassen, Erasmus K H J; Kim, Mi Hyung; Balmford, Andrew; Al-Tabbaa, Abir

    2017-01-01

    The disposal of food waste is a large environmental problem. In the United Kingdom (UK), approximately 15 million tonnes of food are wasted each year, mostly disposed of in landfill, via composting, or anaerobic digestion (AD). European Union (EU) guidelines state that food waste should preferentially be used as animal feed though for most food waste this practice is currently illegal, because of disease control concerns. Interest in the potential diversion of food waste for animal feed is however growing, with a number of East Asian states offering working examples of safe food waste recycling - based on tight regulation and rendering food waste safe through heat treatment. This study investigates the potential benefits of diverting food waste for pig feed in the UK. A hybrid, consequential life cycle assessment (LCA) was conducted to compare the environmental and health impacts of four technologies for food waste processing: two technologies of South Korean style-animal feed production (as a wet pig feed and a dry pig feed) were compared with two widespread UK disposal technologies: AD and composting. Results of 14 mid-point impact categories show that the processing of food waste as a wet pig feed and a dry pig feed have the best and second-best scores, respectively, for 13/14 and 12/14 environmental and health impacts. The low impact of food waste feed stems in large part from its substitution of conventional feed, the production of which has substantial environmental and health impacts. While the re-legalisation of the use of food waste as pig feed could offer environmental and public health benefits, this will require support from policy makers, the public, and the pig industry, as well as investment in separated food waste collection which currently occurs in only a minority of regions.

  2. Ethical Analysis for Evaluating Sustainable Business Decisions: The Case of Environmental Impact Evaluation in the Inambari Hydropower Project

    Directory of Open Access Journals (Sweden)

    Julian Rode

    2015-08-01

    Full Text Available We propose an ethical analysis as a method to reflect on how companies’ decisions promote sustainable development. The method proceeds by first identifying the choice according to financial business interests, and by then scrutinizing this choice according to consequentialist and deontological ethics. The paper applies the method to the choice of an Environmental Impact Assessment (EIA that a consortium of Brazilian companies (EGASUR delivered as part of their project proposal for the realization of the Inambari hydropower dam in the Peruvian Amazon. We show that if an EIA is chosen based on the attempt to maximize the financial bottom line, it raises ethical issues both from a consequentialist perspective by involving negative consequences for various stakeholder groups, and from a deontological perspective by not complying with relevant rules, guidelines, and principles. The two ethical perspectives hence reveal where the consortium faces impediments to a genuine commitment to sustainability. Building on stakeholder interviews, observations of the project developments, and the executive summary of the actual EIA, we provide indications that EGASUR has indeed made a choice that resembles a decision based on financial interests.

  3. Environmental Impact Analysis

    International Nuclear Information System (INIS)

    Idris-Maxdoni-Kamil

    2001-01-01

    In general, EIA is assumed as one of documents needed to fulfill the requirement for operating an activity. In relation to EMS-ISO 14000, a good and high quality EIA is an asset for preparing and implementing the management system. Recently, some EIA's that have been prepared with low quality. Therefore, an evaluation of methodology of preparation an IEA should be conducted such that the quality can be improved. This paper describes the relationship between EIA and EMS-ISO 14000 such that the value of EIA can be more appreciated. (author)

  4. Air quality analysis and related risk assessment for the Bonneville Power Administration's Resource Program Environmental Impact Statement

    Energy Technology Data Exchange (ETDEWEB)

    Glantz, C S; Burk, K W; Driver, C J; Liljegren, J C; Neitzel, D A; Schwartz, M N; Dana, M T; Laws, G L; Mahoney, L A; Rhoads, K

    1992-04-01

    The Bonneville Power Administration (BPA) is considering 12 different alternatives for acquiring energy resources over the next 20 years. Each of the alternatives utilizes a full range of energy resources (e.g., coal, cogeneration, conservation, and nuclear); however, individual alternatives place greater emphases on different types of power-producing resources and employ different timetables for implementing these resources. The environmental impacts that would result from the implementation of each alternative and the economic valuations of these impacts, will be an important consideration in the alternative selection process. In this report we discuss the methods used to estimate environmental impacts from the resource alternatives. We focus on pollutant emissions rates, ground-level air concentrations of basic criteria pollutants, the acidity of rain, particulate deposition, ozone concentrations, visibility attenuation, global warming, human health effects, agricultural and forest impacts, and wildlife impacts. For this study, pollutant emission rates are computed by processing BPA data on power production and associated pollutant emissions. The assessment of human health effects from ozone indicated little variation between the resource alternatives. Impacts on plants, crops, and wildlife populations from power plant emissions are projected to be minimal for all resource alternatives.

  5. Anaesthetic gases: environmental impact and alternatives

    African Journals Online (AJOL)

    Little consideration has been given to the environmental impact of anaesthetic gas .... our practice to select gases with a lower environmental impact is also ... is used as raw material for new anaesthetics. ... none in the pipeline.1. Conclusion.

  6. Environmental impacts from Danish fish products

    DEFF Research Database (Denmark)

    Thrane, Mikkel

    This dissertation presents an assessment of the environmental impacts from Danish fish products in a life cycle perspective (from sea to table). The assessment is carried out in three steps ? and includes a MECO analysis, a quantitative LCA and a qualitative LCA. The results are used to discuss...... current environmental policies addressing the fishery, landing and auction, the fish processing industry, wholesale, transport, retail, and use.It is concluded that considerable improvement potentials exist in the fishing stage, which also represents the largest environmental impact potential compared....... It is suggested that passive and semi-active fishing methods such as Danish seine, purse seine, gillnet and long line represent a significant improvement potential compared to trawl. And it is shown that the energy consumption can be reduced with a factor 15 by substituting beam trawl with Danish seine...

  7. 75 FR 8988 - Environmental Impact Statements; Availability

    Science.gov (United States)

    2010-02-26

    ... DEPARTMENT OF THE INTERIOR Environmental Impact Statements; Availability AGENCY: National Park Service. ACTION: Notice of availability for the Record of Decision on the Final Environmental Impact...) for the final Environmental Impact Statement (EIS) for the disposition of the Bureau of Mines property...

  8. 49 CFR 266.19 - Environmental impact.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Environmental impact. 266.19 Section 266.19... TRANSPORTATION ACT § 266.19 Environmental impact. (a) General. The Administrator has determined that providing..., or other significant adverse environmental impact on any mode of transportation; (6) The action is...

  9. The Environmental Impact and Cost Analysis of Concrete Mixing Blast Furnace Slag Containing Titanium Gypsum and Sludge in South Korea

    Directory of Open Access Journals (Sweden)

    Tae Hyoung Kim

    2016-05-01

    Full Text Available This study assessed the environmental effects and cost of the Industrial Waste addictive Blast Furnace Slag (W-BFS using Life Cycle Assessment (LCA and compared it to general BFS. The environmental impacts of W-BFS were as follows: 1.12 × 10−1 kg-CO2 eq/kg, 3.18 × 10−5 kg-Ethylene eq/kg, 4.79 × 10−4 kg-SO2 eq/kg, 7.15 × 10−4 kg-PO43− eq/kg, 7.15 × 10−4 kg-CFC11 eq/kg and 3.94 × 10−3 kg-Antimony eq/kg. Among the environmental impact category, GWP and AP were 9.28 × 10−2 kg-CO2 eq/kg and 3.33 × 10−4 kg-SO2 eq/kg at a raw material stage, accounting for 80% and 70% of total environmental impact respectively. In EP, POCP and ADP, in addition, raw material stage accounted for a great portion in total environmental impact because of “W” among input materials. In ODP, however, compared to the environmental impact of raw materials, oil, which was used in transporting BFS to the W-BFS manufacturing factory, was more influential. In terms of GWP, POCP and ODP, W-BFS was higher than general BFS. In terms of AP, EP and ADP, in contrast, the former was lower than the latter. In terms of cost, W-BFS (41.7 US$/ton was lower than general BFS by about 17% because of the use of waste additives comprised of industrial wastes instead of natural gypsum ,which has been commonly used in general BFS. In terms of GWP and POCP, the W-BFS mixed (30% concrete was lower than plain concrete by 25%. In terms of AP and EP, the former was lower than the latter by 30%. In terms of ADP, furthermore, W-BFS mixed (30% concrete was lower than plain concrete by 11%. In aggregate-related ODP, however, almost no change was found. In terms of cost, when W-BFS was added by 10% and 30%, it was able to reduce cost by 3% and 7% respectively, compared to plain concrete. Compared to BFS-mixed concrete as well, cost could be saved by 1% additionally because W-BFS (US$41.7/ton is lower than common cement (US$100.3/ton by about 60% in terms of production costs.

  10. Environmental Impact Assessment and End-of-Life Treatment Policy Analysis for Li-Ion Batteries and Ni-MH Batteries

    Directory of Open Access Journals (Sweden)

    Yajuan Yu

    2014-03-01

    Full Text Available Based on Life Cycle Assessment (LCA and Eco-indicator 99 method, a LCA model was applied to conduct environmental impact and end-of-life treatment policy analysis for secondary batteries. This model evaluated the cycle, recycle and waste treatment stages of secondary batteries. Nickel-Metal Hydride (Ni-MH batteries and Lithium ion (Li-ion batteries were chosen as the typical secondary batteries in this study. Through this research, the following results were found: (1 A basic number of cycles should be defined. A minimum cycle number of 200 would result in an obvious decline of environmental loads for both battery types. Batteries with high energy density and long life expectancy have small environmental loads. Products and technology that help increase energy density and life expectancy should be encouraged. (2 Secondary batteries should be sorted out from municipal garbage. Meanwhile, different types of discarded batteries should be treated separately under policies and regulations. (3 The incineration rate has obvious impact on the Eco-indicator points of Nickel-Metal Hydride (Ni-MH batteries. The influence of recycle rate on Lithium ion (Li-ion batteries is more obvious. These findings indicate that recycling is the most promising direction for reducing secondary batteries’ environmental loads. The model proposed here can be used to evaluate environmental loads of other secondary batteries and it can be useful for proposing policies and countermeasures to reduce the environmental impact of secondary batteries.

  11. Environmental Impact Assessment and End-of-Life Treatment Policy Analysis for Li-Ion Batteries and Ni-MH Batteries

    Science.gov (United States)

    Yu, Yajuan; Chen, Bo; Huang, Kai; Wang, Xiang; Wang, Dong

    2014-01-01

    Based on Life Cycle Assessment (LCA) and Eco-indicator 99 method, a LCA model was applied to conduct environmental impact and end-of-life treatment policy analysis for secondary batteries. This model evaluated the cycle, recycle and waste treatment stages of secondary batteries. Nickel-Metal Hydride (Ni-MH) batteries and Lithium ion (Li-ion) batteries were chosen as the typical secondary batteries in this study. Through this research, the following results were found: (1) A basic number of cycles should be defined. A minimum cycle number of 200 would result in an obvious decline of environmental loads for both battery types. Batteries with high energy density and long life expectancy have small environmental loads. Products and technology that help increase energy density and life expectancy should be encouraged. (2) Secondary batteries should be sorted out from municipal garbage. Meanwhile, different types of discarded batteries should be treated separately under policies and regulations. (3) The incineration rate has obvious impact on the Eco-indicator points of Nickel-Metal Hydride (Ni-MH) batteries. The influence of recycle rate on Lithium ion (Li-ion) batteries is more obvious. These findings indicate that recycling is the most promising direction for reducing secondary batteries’ environmental loads. The model proposed here can be used to evaluate environmental loads of other secondary batteries and it can be useful for proposing policies and countermeasures to reduce the environmental impact of secondary batteries. PMID:24646862

  12. Environmental impact assessment and end-of-life treatment policy analysis for Li-ion batteries and Ni-MH batteries.

    Science.gov (United States)

    Yu, Yajuan; Chen, Bo; Huang, Kai; Wang, Xiang; Wang, Dong

    2014-03-18

    Based on Life Cycle Assessment (LCA) and Eco-indicator 99 method, a LCA model was applied to conduct environmental impact and end-of-life treatment policy analysis for secondary batteries. This model evaluated the cycle, recycle and waste treatment stages of secondary batteries. Nickel-Metal Hydride (Ni-MH) batteries and Lithium ion (Li-ion) batteries were chosen as the typical secondary batteries in this study. Through this research, the following results were found: (1) A basic number of cycles should be defined. A minimum cycle number of 200 would result in an obvious decline of environmental loads for both battery types. Batteries with high energy density and long life expectancy have small environmental loads. Products and technology that help increase energy density and life expectancy should be encouraged. (2) Secondary batteries should be sorted out from municipal garbage. Meanwhile, different types of discarded batteries should be treated separately under policies and regulations. (3) The incineration rate has obvious impact on the Eco-indicator points of Nickel-Metal Hydride (Ni-MH) batteries. The influence of recycle rate on Lithium ion (Li-ion) batteries is more obvious. These findings indicate that recycling is the most promising direction for reducing secondary batteries' environmental loads. The model proposed here can be used to evaluate environmental loads of other secondary batteries and it can be useful for proposing policies and countermeasures to reduce the environmental impact of secondary batteries.

  13. Environmental impact of heavy pig production in a sample of Italian farms. A cradle to farm-gate analysis.

    Science.gov (United States)

    Pirlo, G; Carè, S; Casa, G Della; Marchetti, R; Ponzoni, G; Faeti, V; Fantin, V; Masoni, P; Buttol, P; Zerbinatti, L; Falconi, F

    2016-09-15

    Four breeding piggeries and eight growing-fattening piggeries were analyzed to estimate potential environmental impacts of heavy pig production (>160kg of live height at slaughtering). Life Cycle Assessment methodology was adopted in the study, considering a system from breeding phase to growing fattening phase. Environmental impacts of breeding phase and growing-fattening phase were accounted separately and then combined to obtain the impacts of heavy pig production. The functional unit was 1kg of live weight gain. Impact categories investigated were global warming (GW), acidification (AC), eutrophication (EU), abiotic depletion (AD), and photochemical ozone formation (PO). The total environmental impact of 1kg of live weight gain was 3.3kg CO2eq, 4.9E-2kg SO2eq, 3.1E-2kg PO4(3-)eq, 3.7E-3kg Sbeq, 1.7E-3kg C2H4eq for GW, AC, EU, AD, and PO respectively. Feed production was the main hotspot in all impact categories. Greenhouse gases responsible for GW were mainly CH4, N2O, and CO2. Ammonia was the most important source of AC, sharing about 90%. Nitrate and NH3 were the main emissions responsible for EU, whereas P and NOx showed minor contributions. Crude oil and natural gas consumption was the main source of AD. A large spectrum of pollutants had a significant impact on PO: they comprised CH4 from manure fermentation, CO2 caused by fossil fuel combustion in agricultural operations and industrial processes, ethane and propene emitted during oil extraction and refining, and hexane used in soybean oil extraction. The farm characteristics that best explained the results were fundamentally connected with performance indicators Farms showed a wide variability of results, meaning that there was wide margin for improving the environmental performance of either breeding or growing-fattening farms. The effectiveness of some mitigation measures was evaluated and the results that could be obtained by their introduction have been presented. Copyright © 2016 Elsevier B.V. All

  14. Analysis Of The Socioeconomic And Environmental Impacts Of Irrigated Agriculture In The Irrigated Perimeter Of Pau Dos Ferros (Rn

    Directory of Open Access Journals (Sweden)

    José Jobson Garcia de Almeida

    2014-07-01

    Full Text Available The Brazilian Government implemented irrigated perimeters to ameliorate problems of drought and poverty in the Northeast. In this sense, the objective of this work was to analyze the social, economic and environmental impacts generated by the practice of irrigated agriculture in the municipality of Pau dos Ferros-RN, resulting from the impacts caused by the activity. Obtained references on the topic, on-site visits and interviews with producers of the perimeter. It was observed the presence of negative impacts in the area, such as waste, contamination and water salinisation, compaction and soil erosion, deforestation caused by the removal of the native vegetation, high consumption of energy and public health problems.

  15. Impact of Environmental Auditing on Environmental Pollution ...

    African Journals Online (AJOL)

    PROF HORSFALL

    and sustainable development, environmental pollution and healthy environment. To achieve the desired sustainable ... Dates: Received: 12February 2018; Revised: 08 April: 2018; Accepted: 16 April 2018 ..... Commerce (ICC), Paris. Lynn, R ...

  16. Environmental impact assessment Geopressure Subprogram

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-07-01

    This environmental impact assessment (EIA) addresses the expected programmatic activities of the Geopressure Subprogram of the Division of Geothermal Energy. The goal of the Geopressure Subprogram is to stimulate development of geopressured resources as an economic, reliable, operationally safe, and environmentally acceptable energy source. The subprogram includes activities in the areas of engineering research and development; resource exploration, assessment, and development; resource utilization including pilot and demonstration facilities; and environmental research and control technology development. It should be recognized that most of the subprogram activities extend over several years and are in their early stages of implementation at this time. The zones of potential geopressure development are in the region located along the Texas and Louisiana Gulf Coasts extending up to 200 miles (300 km) inland. Geopressured zones are sedimentary basins where water is trapped at high pressures within or below thick, nearly impermeable shale sequences. The confined water supports most or all of the weight of the overburden. This inhibits sediment compaction and causes formation pore pressure to exceed hydrostatic pressure. in sedimentary basins that are underlain by thin oceanic crust, upward thermal conduction from the mantle heats geopressured fluids and sediments to abnormally high temperatures, often in excess of 260 C (500 F).

  17. Initial review and analysis of the direct environmental impacts of CSP in the northern Cape, South Africa

    Science.gov (United States)

    Rudman, Justine; Gauché, Paul; Esler, Karen J.

    2016-05-01

    The Integrated Resource Plan (IRP) of 2010 and the IRP Update provide the most recent guidance to the electricity generation future of South Africa (SA) and both plans include an increased proportion of renewable energy generation capacity. Given that SA has abundant renewable energy resource potential, this inclusion is welcome. Only 600 MW of the capacity allocated to concentrating solar power (CSP) has been committed to projects in the Northern Cape and represents roughly a fifth of the capacity that has been included in the IRP. Although CSP is particularly new in the electricity generation system of the country, the abundant solar resources of the region with annual DNI values of above 2900 kWh/m2 across the arid Savannah and Nama-Karoo biomes offer a promising future for the development of CSP in South Africa. These areas have largely been left untouched by technological development activities and thus renewable energy projects present a variety of possible direct and indirect environmental, social and economic impacts. Environmental Impact Assessments do focus on local impacts, but given that ecological processes often extend to regional- and landscape scales, understanding this scaled context is important to the alignment of development- and conservation priorities. Given the capacities allocated to CSP for the future of SA's electricity generation system, impacts on land, air, water and biodiversity which are associated with CSP are expected to increase in distribution and the understanding thereof deems valuable already from this early point in CSP's future in SA. We provide a review of direct impacts of CSP on the natural environment and an overview of the anticipated specific significance thereof in the Northern Cape.

  18. Energy Analysis and Environmental Impacts of Hybrid Giant Napier (Pennisetum Hydridum) Direct-fired Power Generation in South China

    Science.gov (United States)

    Liao, Yanfen; Fang, Hailin; Zhang, Hengjin; Yu, Zhaosheng; Liu, Zhichao; Ma, Xiaoqian

    2017-05-01

    To meet with the demand of energy conservation and emission reduction policies, the method of life cycle assessment (LCA) was used to assess the feasibility of Hybrid Giant Napier (HGN) direct-fired power generation in this study. The entire life cycle is consisted of five stages (cultivation and harvesting, transportation, drying and comminuting, direct-fired power generation, constructing and decommissioning of biomass power plant). Analytical results revealed that to generate 10000kWh electricity, 10.925 t of customized HGN fuel (moisture content: 30 wt%) and 6659.430 MJ of energy were required. The total environmental impact potential was 0.927 PET2010 (person equivalents, targeted, in 2010) and the global warming (GW), acidification (AC), and nutrient (NE) emissions were 339.235 kg CO2-eq, 22.033 kg SO2-eq, and 25.486 kg NOx-eq respectively. The effect of AC was the most serious among all calculated category impacts. The energy requirements and environmental impacts were found to be sensitive to single yield, average transport distance, cutting frequency, and moisture content. The results indicated that HGN direct-fired power generation accorded well with Chinese energy planning; in addition, HGN proved to be a promising contribution to reducing non-renewable energy consumption and had encouraging prospects as a renewable energy plant.

  19. An Environmental Impact Analysis of Semi-Mechanical Extraction Process of Sago Starch: Life Cycle Assessment (LCA) Perspective

    Science.gov (United States)

    Yusuf, M. A.; Romli, M.; Suprihatin; Wiloso, E. I.

    2018-05-01

    Industrial activities use material, energy and water resources and generate greenhouse gas (GHG). Currently, various regulations require industry to measure and quantify the emissions generated from its process activity. LCA is a method that can be used to analyze and report the environmental impact of an activity that uses resources and generates waste by an industrial activity. In this work, LCA is used to determine the environmental impact of a semi-mechanical extraction process of sago industry. The data was collected through the sago industry in Cimahpar, Bogor. The extraction of sago starch consists of stem cutting, rasping, mixing, filtration, starch sedimentation, washing, and drying. The scope of LCA study covers the harvesting of sago stem, transportation to extraction site, and the starch extraction process. With the assumption that the average transportation distance of sago stem to extraction site is 200 km, the GHG emission is estimated to be 325 kg CO2 eq / ton of sundried sago starch. This figure is lower than that reported for maize starch (1120 kg CO2 eq), potato starch (2232 kg CO2 eq) and cassava starch (4310 kg CO2 eq). This is most likely due to the uncounted impact from the use of electrical energy on the extraction process, which is currently being conducted. A follow-up study is also underway to formulate several process improvement scenarios to derive the design of sago starch processing that generates the minimum emissions.

  20. How cutting-edge technologies impact the design of electrochemical (bio)sensors for environmental analysis. A review.

    Science.gov (United States)

    Arduini, Fabiana; Cinti, Stefano; Scognamiglio, Viviana; Moscone, Danila; Palleschi, Giuseppe

    2017-03-22

    Through the years, scientists have developed cutting-edge technologies to make (bio)sensors more convenient for environmental analytical purposes. Technological advancements in the fields of material science, rational design, microfluidics, and sensor printing, have radically shaped biosensor technology, which is even more evident in the continuous development of sensing systems for the monitoring of hazardous chemicals. These efforts will be crucial in solving some of the problems constraining biosensors to reach real environmental applications, such as continuous analyses in field by means of multi-analyte portable devices. This review (with 203 refs.) covers the progress between 2010 and 2015 in the field of technologies enabling biosensor applications in environmental analysis, including i) printing technology, ii) nanomaterial technology, iii) nanomotors, iv) biomimetic design, and (v) microfluidics. Next section describes futuristic cutting-edge technologies that are gaining momentum in recent years, which furnish highly innovative aspects to biosensing devices. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. Final Environmental Impact Statement Resource Programs

    International Nuclear Information System (INIS)

    1993-02-01

    BPA's preferred alternative is the Emphasize Conservation Alternative. System and environmental costs are low. Environmental impacts from conservation are minimal. This alternative is cost-effective and environmentally responsible; only the High Conservation Alternative has lower costs and fewer environmental impacts. However, there is some concern about the cost-effectiveness, reliability, and commercial availability of the high conservation resources. If the supply of the additional conservation potential was confirmed and it became cost-effective, the High Conservation Alternative would be preferred. The Draft Resource Programs EIS was released for public review during the summer of 1992. Comments received by letter or in the public hearing held June 16, 1992, were used to revise and update data and analyses of the EIS (public comments and BPA's responses are contained in Volume III of the Final EIS). In addition, a number of revisions were made in the Chapter 3 material describing each resource type, and in Chapter 4 and the Summary, to assure consistency with the modeling and analysis in Chapter 5. Additional information about the capacity aspects of each resource type and alternative has been added, and the material on conservation and its impacts has been reorganized

  2. Graphical Methodology of Global Pollution Index for the Environmental Impact Assessment Using Two Environmental Components

    OpenAIRE

    Corneliu Cojocaru; Diana Mariana Cocârţă; Irina Aura Istrate; Igor Creţescu

    2017-01-01

    One of the applied methods for environmental impact assessment is the index of global pollution (IGP) proposed by Rojanschi in 1991. This methodology enables the global estimation for the ecosystem state affected more or less by human activities. Unfortunately, Rojanschi’s method has a limitation; it can be applied only if at least three environmental components are considered. Frequently, many environmental impact assessment applications rely on analysis of only two environmental components....

  3. 76 FR 21345 - Environmental Impacts Statements;

    Science.gov (United States)

    2011-04-15

    ... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-8996-4] Environmental Impacts Statements; Notice of Availability Responsible Agency: Office of Federal Activities, General Information (202) 564-1399 or http://www.epa.gov/compliance/nepa/ Weekly receipt of Environmental Impact Statements Filed 04/04/2011 Through 04...

  4. 78 FR 48672 - Environmental Impacts Statements;

    Science.gov (United States)

    2013-08-09

    ... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-9010-5] Environmental Impacts Statements; Notice of Availability Responsible Agency: Office of Federal Activities, General Information (202) 564-7146 or http://www.epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements Filed 07/29/2013 Through...

  5. Valued ecosystem components for watershed cumulative effects: an analysis of environmental impact assessments in the South Saskatchewan River watershed, Canada.

    Science.gov (United States)

    Ball, Murray A; Noble, Bram F; Dubé, Monique G

    2013-07-01

    The accumulating effects of human development are threatening water quality and availability. In recognition of the constraints to cumulative effects assessment (CEA) under traditional environmental impact assessment (EIA), there is an emerging body of research dedicated to watershed-based cumulative effects assessment (WCEA). To advance the science of WCEA, however, a standard set of ecosystem components and indicators is required that can be used at the watershed scale, to inform effects-based understanding of cumulative change, and at the project scale, to inform regulatory-based project based impact assessment and mitigation. A major challenge, however, is that it is not clear how such ecosystem components and indicators for WCEA can or should be developed. This study examined the use of aquatic ecosystem components and indicators in EIA practice in the South Saskatchewan River watershed, Canada, to determine whether current practice at the project scale could be "scaled up" to support ecosystem component and indicator development for WCEA. The hierarchy of assessment components and indicators used in a sample of 35 environmental impact assessments was examined and the factors affecting aquatic ecosystem component selection and indicator use were identified. Results showed that public environmental impact statements are not necessarily publically accessible, thus limiting opportunities for data and information sharing from the project to the watershed scale. We also found no consistent terminology across the sample of impact statements, thus making comparison of assessment processes and results difficult. Regulatory compliance was found to be the dominant factor influencing the selection of ecosystem components and indicators for use in project assessment, rather than scientific reasoning, followed by the mandate of the responsible government agency for the assessment, public input to the assessment process, and preexisting water licensing arrangements external

  6. Environmental impacts of construction materials use: a life cycle perspective

    CSIR Research Space (South Africa)

    Ampofo-Anti, N

    2009-02-01

    Full Text Available of the environmental impacts of a product (or service). The Life Cycle Assessment (LCA) concept previously known as Life Cycle Analysis has emerged as one of the most appropriate tools for assessing product-related environmental impacts and for supporting an effective...

  7. Quality Assurance in Environmental Technology Verification (ETV): Analysis and Impact on the EU ETV Pilot Programme Performance

    Science.gov (United States)

    Molenda, Michał; Ratman-Kłosińska, Izabela

    2018-03-01

    Many innovative environmental technologies never reach the market because they are new and cannot demonstrate a successful track record of previous applications. This fact is a serious obstacle on their way to the market. Lack of credible data on the performance of a technology causes mistrust of investors in innovations, especially from public sector, who seek effective solutions however without compromising the technical and financial risks associated with their implementation. Environmental technology verification (ETV) offers a credible, robust and transparent process that results in a third party confirmation of the claims made by the providers about the performance of the novel environmental technologies. Verifications of performance are supported by high quality, independent test data. In that way ETV as a tool helps establish vendor credibility and buyer confidence. Several countries across the world have implemented ETV in the form of national or regional programmes. ETV in the European Union was implemented as a voluntary scheme if a form of a pilot programme. The European Commission launched the Environmental Technology Pilot Programme of the European Union (EU ETV) in 2011. The paper describes the European model of ETV set up and put to operation under the Pilot Programme of Environmental Technologies Verification of the European Union. The goal, objectives, technological scope, involved entities are presented. An attempt has been made to summarise the results of the EU ETV scheme performance available for the period of 2012 when the programme has become fully operational until the first half of 2016. The study was aimed at analysing the overall organisation and efficiency of the EU ETV Pilot Programme. The study was based on the analysis of the documents the operation of the EU ETV system. For this purpose, a relevant statistical analysis of the data on the performance of the EU ETV system provided by the European Commission was carried out.

  8. 76 FR 65746 - Notice of Availability of Joint Final Environmental Impact Statement/Final Environmental Impact...

    Science.gov (United States)

    2011-10-24

    ...In accordance with the National Environmental Policy Act of 1969, as amended (NEPA), and the Federal Land Policy and Management Act of 1976, as amended (FLPMA), the Bureau of Land Management (BLM) and the California Public Utilities Commission (CPUC) have prepared a Final Environmental Impact Statement (EIS) and Final Environmental Impact Report (EIR) as a joint environmental analysis document for Tule Wind, LLC's Tule Wind Project (Tule Project) and the San Diego Gas and Electric's (SDG&E) East County Substation Project (ECO Project) and by this notice are announcing the availability of the Final EIS/EIR. By this Notice the BLM is also segregating the public lands within the Tule Project application area from appropriation under the public land laws including the Mining Law, but not the Mineral Leasing or Material Sales Act, for a period of 2 years.

  9. 75 FR 2517 - Notice of Intent To Prepare a Joint Environmental Impact Statement and Environmental Impact...

    Science.gov (United States)

    2010-01-15

    ...The action being taken is the preparation of a joint environmental impact statement/environmental impact report (EIS/EIR) for the Lower San Joaquin River Feasibility Study (LSJRFS). The EIS/EIR will be prepared in accordance with the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA). The U.S. Army Corps of Engineers (USACE) will serve as lead agency for compliance with NEPA, and the San Joaquin Area Flood Control Agency (SJAFCA) will serve as lead agency for compliance with CEQA. The LSJRFS will evaluate alternatives, including a locally preferred plan, for providing flood damage reduction and ecosystem restoration along the lower (northern) portion of the San Joaquin River system in the Central Valley of California. The approximate area of the proposed action and analysis is identified in Figure 1.

  10. 75 FR 8047 - Notice of Intent To Prepare a Joint Environmental Impact Statement and Environmental Impact...

    Science.gov (United States)

    2010-02-23

    ...Pursuant to the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA), the U.S. Army Corps of Engineers, Sacramento District (USACE) intends to prepare a joint environmental impact statement/environmental impact report (EIS/EIR) for the Lower Walnut Creek General Reevaluation Report (LWCGRR). USACE will serve as lead agency for compliance with NEPA, and the Contra Costa County Flood Control and Water Conservation District (CCCFCWCD) will serve as lead agency for compliance with CEQA. The LWCGRR will evaluate alternatives, including a locally preferred plan, for providing flood risk management and ecosystem restoration along the northern portion of the Walnut Creek watershed in the Central Coast of California. The approximate drainage area of the proposed action and analysis is 180 square miles.

  11. 10 CFR 51.29 - Scoping-environmental impact statement and supplement to environmental impact statement.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Scoping-environmental impact statement and supplement to environmental impact statement. 51.29 Section 51.29 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED... Environmental Policy Act-Regulations Implementing Section 102(2) Scoping § 51.29 Scoping-environmental impact...

  12. 40 CFR 227.4 - Criteria for evaluating environmental impact.

    Science.gov (United States)

    2010-07-01

    ... impact. 227.4 Section 227.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN... Impact § 227.4 Criteria for evaluating environmental impact. This subpart B sets specific environmental... of direct environmental impact. ...

  13. Applicable international environmental impact assessment laws for ...

    African Journals Online (AJOL)

    Lawrence Hart

    1971-05-28

    May 28, 1971 ... appraise selected International Environmental laws and the Nigerian Environmental Impact Assessment methodology ... maze of pipelines, delivery lines, flow lines, canals and .... Toxic Materials and international waterways.

  14. Ports Primer: 7.1 Environmental Impacts

    Science.gov (United States)

    Port operations can lead to environmental impacts on air, water and land. Many communities with environmental justice concerns also experience disparities in health outcomes that they attribute to exposure to emissions from port operations.

  15. Ports Primer: 7.0 Environmental Impacts

    Science.gov (United States)

    Port operations can lead to environmental impacts on air, water and land. Many communities with environmental justice concerns also experience disparities in health outcomes that they attribute to exposure to emissions from port operations.

  16. Environmental impacts assessment: Instruments for environmental policy making and resource management

    International Nuclear Information System (INIS)

    Cavelli, C.M.; Sartori, S.

    1993-06-01

    This review of evaluation criteria for environmental impacts assessments in Italy covers the following aspects: the efficacy of current Italian normatives governing assessment methods, the current approach of regional public administrations, the necessity for the creation of a national regulating board, environmental impacts assessment for complex environmental systems, the application of impacts assessment recommendations to resource development modelling in the planning of integrated environmental-economic systems, the involvement of the general public in decision making, techniques to determine the monetary worth of environmental resources, the use of multi-criteria analysis techniques

  17. Evaluating the Relative Environmental Impact of Countries

    OpenAIRE

    Bradshaw, Corey J. A.; Giam, Xingli; Sodhi, Navjot Singh

    2010-01-01

    Environmental protection is critical to maintain ecosystem services essential for human well-being. It is important to be able to rank countries by their environmental impact so that poor performers as well as policy ?models? can be identified. We provide novel metrics of country-specific environmental impact ranks ? one proportional to total resource availability per country and an absolute (total) measure of impact ? that explicitly avoid incorporating confounding human health or economic i...

  18. Environmental impact of power generation: a review

    International Nuclear Information System (INIS)

    Lima-e-Silva, Pedro Paulo de

    1996-01-01

    The increasing worldwide concern about the planet health is reflected in the willing-to-pay behavior in face of environmentally sound products (the case of American unleaded gasoline) and also in the recently approved international standards as ISO-14000. Considering this, a comparison between major energy sources, like Hydro, Thermal and Nuclear electricity, strictly in terms of environmental impact, becomes relevant. this paper intends to trace a critical analysis of the actual environmental impact occurred in the last 20 years, comparing it with the imagined impact that was foreseen 20 years ago, and making some comments about the future. What one sees nowadays is quite a different situation as it was seen by the environmentalists in Brazil at that time (1976). The cost of land around rivers has increased significantly; social problem with flooding land is even critical in several areas; forests are given higher value than ever; the CO 2 yield has become a world concern, as SOx and NOx as well; C H4 released from flooded forests is a powerful greenhouse gas; the safety of Nuclear Power Plants are still questioned, as well whether or not the uranium reserves are going to support an increasing demand for more 20 years; new standards in public acceptance of pollution has been established. A greater dose of rationale should be put into this discussion. (author)

  19. Lawrence Livermore National Laboratory Decontamination and Waste Treatment Facility: Documentation of impact analysis for design alternatives presented in the Draft Environmental Impact Statement

    International Nuclear Information System (INIS)

    1988-05-01

    Lawrence Livermore National Laboratory (LLNL) is proposing to construct and operate a new Decontamination and Waste Treatment Facility (DWTF). The proposed DWTF would replace the existing Hazardous Waste Management (HWM) facilities at LLNL. The US Department of Energy (DOE) is preparing a Draft Environmental Impact Statement (DEIS) to assess the environmental consequences of the proposed DWTF and its alternatives. This report presents the assumptions, methodologies, and analyses used to estimate the waste flows, air emissions, ambient air quality impacts, and public health risks that are presented in the DEIS. Two DWTF design alternatives (Level I and Level II) have been designated as reasonable design alternatives considering available technologies, environmental regulations, and current and future LLNL waste generation. Both design alternatives would include new, separate radioactive and nonradioactive liquid waste treatment systems, a solidification unit, a new decontamination facility, storage and treatment facilities for reactive materials, a radioactive waste storage area, receiving and classification areas, and a uranium burn pan. The Level I design alternative would include a controlled-air incinerator system, while the Level II design alternative would include a rotary kiln incinerator system. 43 refs., 4 figs., 24 tabs

  20. Environmental impacts of energy alternatives

    International Nuclear Information System (INIS)

    Ghosh, P.K.

    1998-01-01

    Indian society today is concerned about the health and environmental risks of technologies. The major environmental issues of concern for technologies available for electricity generation are air emissions, management of wastes generated and land requirements. The production of electricity in India is primarily composed of a mix of thermal and hydroelectric power plants with nuclear energy currently contributing to an extent of slightly above 2.0%. For maintaining a decent living standard the present electricity generation has to be increased manifold and with the existing commercially available technologies this can lead to a greater impact on the environment in the immediate vicinity of plant unless a judicious mix is chosen. India which hardly contributed 1 of the global pollution in the year 1950 contributes about 20% now and with the growth in electricity generation its contribution will also be slightly increasing and hence environment will have to be one of the guiding factors in future choice of technologies for the growth of electric power generation. Indian coal has a very high ash content (30 - 50 %) and hence the fly ash problem in India can be severe. During the year 1993-94 approximately 33 million tonnes of fly ash was generated in India from the coal fired thermal power stations. The land requirement for disposal of this ash is continuously increasing. The disposal of fly ash near water bodies will also create difficulties as in addition to radionuclides, toxic trace elements may also get washed out. Pollution from the use of coal will have a definite effect on the environment in addition to depletion of the energy source

  1. Environmental impact of PV cell waste scenario.

    Science.gov (United States)

    Bogacka, M; Pikoń, K; Landrat, M

    2017-12-01

    Rapid growth of the volume of waste from PV cells is expected in the following years. The problem of its utilization seems to be the most important issue for future waste management systems. The environmental impacts of the PV recycling scenario are presented in the manuscript. The analysis is based on the LCA approach and the average data available in specialized databases for silicon standard PV cell is used. The functional unit includes parameters like: efficiency, composition, surface area. The discussion on the environmental impact change due to the location of the PV production and waste processing plants is presented in the manuscript. Additionally, the discussion on the environmental effect of substituting different energy resources with PV cells is presented in the manuscript. The analysis of the PV cell life cycle scenario presented in the article was performed using the SIMA PRO software and data from Ecoinvent 3.0 database together with additional data obtained from other sources. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Evaluation Tools of nanomaterials environmental impact

    International Nuclear Information System (INIS)

    Barberio, Grazia; Scalbi, Simona; Buttol, Patrizia; Masoni, Paolo; Righi, Serena

    2015-01-01

    Nanotechnology show an increasing spread thanks to the special properties of nanomaterials (NM). Knowledge of the NM behavior and interactions with the environment and human health is still insufficient to assess the impact of the NM. A multidisciplinary, multidimensional and systemic such as that of the life cycle (Life Cycle Thinking - LCT), applied through the tool Life Cycle Assessment (LCA), is essential in environmental sustainability assessment of technologies, with some limitations that can be overcome through integration with other instruments such as, for example, non-linear models, analysis of flows of material, Risk Assessment (RA). This article offers a detailed analysis of the state and the main problems related to the application of LCA and RA to NM both separately and in combined use; They will then discuss the strategies and integrations needed to overcome the limitations of both methods and obtain robust assessments of the impacts on health and the environment [it

  3. Environmental impacts of the Super Collider

    International Nuclear Information System (INIS)

    Baillieul, T.A.; Hasselkus, W.

    1991-01-01

    The National Environmental Policy Act of 1969, affectionately referred to as NEPA, is a simple piece of legislation with far-reaching implications. (a) It sets a requirement for Federal government decision makers to consider the environmental consequences of their actions before deciding on a course of action. (b) A decision maker is essentially anyone who causes something to happen; and the action can be just about anything. (c) NEPA comes into play at the point in time where a proposed action is matched to a physical location. (d) NEPA implementation is recorded in many ways. The DOE maintains a long list of categorical exclusions for actions which practice has shown to be inconsequential - such as processing records, or maintaining physical plants. However, in selecting a categorical exclusion for an action, the decision maker/project manager must at least think about the activity to be performed and its possible environmental consequences. (e) A large project like the SSC, involving an undeveloped site, automatically qualifies for the highest level of environmental analysis under NEPA - the Environmental Impact Statement (or EIS)

  4. Quantitative analysis on the environmental impact of large-scale water transfer project on water resource area in a changing environment

    Directory of Open Access Journals (Sweden)

    D. H. Yan

    2012-08-01

    Full Text Available The interbasin long-distance water transfer project is key support for the reasonable allocation of water resources in a large-scale area, which can optimize the spatio-temporal change of water resources to secure the amount of water available. Large-scale water transfer projects have a deep influence on ecosystems; besides, global climate change causes uncertainty and additive effect of the environmental impact of water transfer projects. Therefore, how to assess the ecological and environmental impact of megaprojects in both construction and operation phases has triggered a lot of attention. The water-output area of the western route of China's South-North Water Transfer Project was taken as the study area of the present article. According to relevant evaluation principles and on the basis of background analysis, we identified the influencing factors and established the diagnostic index system. The climate-hydrology-ecology coupled simulation model was used to simulate and predict ecological and environmental responses of the water resource area in a changing environment. The emphasis of impact evaluation was placed on the reservoir construction and operation scheduling, representative river corridors and wetlands, natural reserves and the water environment below the dam sites. In the end, an overall evaluation of the comprehensive influence of the project was conducted. The research results were as follows: the environmental impacts of the western route project in the water resource area were concentrated on two aspects: the permanent destruction of vegetation during the phase of dam construction and river impoundment, and the significant influence on the hydrological situation of natural river corridor after the implementation of water extraction. The impact on local climate, vegetation ecology, typical wetlands, natural reserves and the water environment of river basins below the dam sites was small.

  5. Quantitative analysis on the environmental impact of large-scale water transfer project on water resource area in a changing environment

    Science.gov (United States)

    Yan, D. H.; Wang, H.; Li, H. H.; Wang, G.; Qin, T. L.; Wang, D. Y.; Wang, L. H.

    2012-08-01

    The interbasin long-distance water transfer project is key support for the reasonable allocation of water resources in a large-scale area, which can optimize the spatio-temporal change of water resources to secure the amount of water available. Large-scale water transfer projects have a deep influence on ecosystems; besides, global climate change causes uncertainty and additive effect of the environmental impact of water transfer projects. Therefore, how to assess the ecological and environmental impact of megaprojects in both construction and operation phases has triggered a lot of attention. The water-output area of the western route of China's South-North Water Transfer Project was taken as the study area of the present article. According to relevant evaluation principles and on the basis of background analysis, we identified the influencing factors and established the diagnostic index system. The climate-hydrology-ecology coupled simulation model was used to simulate and predict ecological and environmental responses of the water resource area in a changing environment. The emphasis of impact evaluation was placed on the reservoir construction and operation scheduling, representative river corridors and wetlands, natural reserves and the water environment below the dam sites. In the end, an overall evaluation of the comprehensive influence of the project was conducted. The research results were as follows: the environmental impacts of the western route project in the water resource area were concentrated on two aspects: the permanent destruction of vegetation during the phase of dam construction and river impoundment, and the significant influence on the hydrological situation of natural river corridor after the implementation of water extraction. The impact on local climate, vegetation ecology, typical wetlands, natural reserves and the water environment of river basins below the dam sites was small.

  6. Energetic technologies and environmental impact

    International Nuclear Information System (INIS)

    2001-01-01

    This monograph is a collective work by scientist from CIEMAT (Spanish centre for research on energy, environment and technology). By reviewing the central topics of their own work, the authors present a world-wide update of the state of the arts of the different technologies involved in energy production. The chapters fo through the more promising technologies related to the diverse energy sources, from the nuclear to the renewable and chemical a large gamut of energy supply ways is revised. The analysis of the production technologies is accompanied by considerations of the environmental implications, an aspect to wich a whole part of the volume is devoted. The book begins with a foreword by Dr. Felix Yndurain, former General Director of CIEMAT and follows with a general introduction to the main topics, that are presented in three parts, with specific introductions. There is also a closing fourth part that includes some additional activities where more basic and technical developments are included. The first part is devoted to energy of nuclear origin. In two separate sections, fission and fusion technologies are covered. The fission section points towards the present day problems of nuclear plants (ageing, accidents, risk analysis, etc.), reprocessing of the nuclear fuel, radioactive wastes and environmental radioactivity. The fusion section contains a critical account of the present and expected developments of the fusion reactors together with an exposition of the related plasma physics problems. The second part comprises two sections devoted to energy generation of renewable and chemical origin, respectively. Tehcnologies for solar, wind and biomass energies are thoroughly exposed along the renewable energy section whereas the chemical energy section is devoted to the modern technologies of clean fossil fuel combustion and gasification, as well as to the new appealing subject of direct electric generation with fuel cells. The main environmental and social

  7. Evaluating the relative environmental impact of countries.

    Science.gov (United States)

    Bradshaw, Corey J A; Giam, Xingli; Sodhi, Navjot S

    2010-05-03

    Environmental protection is critical to maintain ecosystem services essential for human well-being. It is important to be able to rank countries by their environmental impact so that poor performers as well as policy 'models' can be identified. We provide novel metrics of country-specific environmental impact ranks - one proportional to total resource availability per country and an absolute (total) measure of impact - that explicitly avoid incorporating confounding human health or economic indicators. Our rankings are based on natural forest loss, habitat conversion, marine captures, fertilizer use, water pollution, carbon emissions and species threat, although many other variables were excluded due to a lack of country-specific data. Of 228 countries considered, 179 (proportional) and 171 (absolute) had sufficient data for correlations. The proportional index ranked Singapore, Korea, Qatar, Kuwait, Japan, Thailand, Bahrain, Malaysia, Philippines and Netherlands as having the highest proportional environmental impact, whereas Brazil, USA, China, Indonesia, Japan, Mexico, India, Russia, Australia and Peru had the highest absolute impact (i.e., total resource use, emissions and species threatened). Proportional and absolute environmental impact ranks were correlated, with mainly Asian countries having both high proportional and absolute impact. Despite weak concordance among the drivers of environmental impact, countries often perform poorly for different reasons. We found no evidence to support the environmental Kuznets curve hypothesis of a non-linear relationship between impact and per capita wealth, although there was a weak reduction in environmental impact as per capita wealth increases. Using structural equation models to account for cross-correlation, we found that increasing wealth was the most important driver of environmental impact. Our results show that the global community not only has to encourage better environmental performance in less

  8. Evaluating the Relative Environmental Impact of Countries

    Science.gov (United States)

    Bradshaw, Corey J. A.; Giam, Xingli; Sodhi, Navjot S.

    2010-01-01

    Environmental protection is critical to maintain ecosystem services essential for human well-being. It is important to be able to rank countries by their environmental impact so that poor performers as well as policy ‘models’ can be identified. We provide novel metrics of country-specific environmental impact ranks – one proportional to total resource availability per country and an absolute (total) measure of impact – that explicitly avoid incorporating confounding human health or economic indicators. Our rankings are based on natural forest loss, habitat conversion, marine captures, fertilizer use, water pollution, carbon emissions and species threat, although many other variables were excluded due to a lack of country-specific data. Of 228 countries considered, 179 (proportional) and 171 (absolute) had sufficient data for correlations. The proportional index ranked Singapore, Korea, Qatar, Kuwait, Japan, Thailand, Bahrain, Malaysia, Philippines and Netherlands as having the highest proportional environmental impact, whereas Brazil, USA, China, Indonesia, Japan, Mexico, India, Russia, Australia and Peru had the highest absolute impact (i.e., total resource use, emissions and species threatened). Proportional and absolute environmental impact ranks were correlated, with mainly Asian countries having both high proportional and absolute impact. Despite weak concordance among the drivers of environmental impact, countries often perform poorly for different reasons. We found no evidence to support the environmental Kuznets curve hypothesis of a non-linear relationship between impact and per capita wealth, although there was a weak reduction in environmental impact as per capita wealth increases. Using structural equation models to account for cross-correlation, we found that increasing wealth was the most important driver of environmental impact. Our results show that the global community not only has to encourage better environmental performance in less

  9. Evaluating the relative environmental impact of countries.

    Directory of Open Access Journals (Sweden)

    Corey J A Bradshaw

    Full Text Available Environmental protection is critical to maintain ecosystem services essential for human well-being. It is important to be able to rank countries by their environmental impact so that poor performers as well as policy 'models' can be identified. We provide novel metrics of country-specific environmental impact ranks - one proportional to total resource availability per country and an absolute (total measure of impact - that explicitly avoid incorporating confounding human health or economic indicators. Our rankings are based on natural forest loss, habitat conversion, marine captures, fertilizer use, water pollution, carbon emissions and species threat, although many other variables were excluded due to a lack of country-specific data. Of 228 countries considered, 179 (proportional and 171 (absolute had sufficient data for correlations. The proportional index ranked Singapore, Korea, Qatar, Kuwait, Japan, Thailand, Bahrain, Malaysia, Philippines and Netherlands as having the highest proportional environmental impact, whereas Brazil, USA, China, Indonesia, Japan, Mexico, India, Russia, Australia and Peru had the highest absolute impact (i.e., total resource use, emissions and species threatened. Proportional and absolute environmental impact ranks were correlated, with mainly Asian countries having both high proportional and absolute impact. Despite weak concordance among the drivers of environmental impact, countries often perform poorly for different reasons. We found no evidence to support the environmental Kuznets curve hypothesis of a non-linear relationship between impact and per capita wealth, although there was a weak reduction in environmental impact as per capita wealth increases. Using structural equation models to account for cross-correlation, we found that increasing wealth was the most important driver of environmental impact. Our results show that the global community not only has to encourage better environmental performance in

  10. The use of models to assess environmental impacts

    International Nuclear Information System (INIS)

    Gustafson, P.F.

    1978-01-01

    Environmental impacts will include the effects on man as well as on other major segments of the natural or indigenous ecosystems. In their present state of development, the models used for environmental impact analysis give at least a semiquantitative estimate of the magnitude of such impacts. The methods used in the development of models are given, and their strengths and weaknesses are described. The relationship between predictive, before-the-fact models, and monitoring programs conducted during facility operation are also discussed

  11. Environmental impact analysis (EIA) concerning lodgepole pine forestry in Sweden; Miljoekonsekvensbeskrivning (MKB) av skogsbruk med contortatall i Sverige

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Bengt; Rosvall, Ola [Forestry Research Inst. of Sweden, Uppsala (Sweden); Engelmark, Ola [Centrum foer ekologisk haallbarhet, Umeaa (Sweden); Sjoeberg, Kjell [Swedish Univ. of Agricultural Sciences, Umeaa (Sweden). Dept. of Animal Ecology

    1999-07-01

    This report presents an analysis of the ecological consequences of forestry with Canadian lodgepole pine introduced into Sweden. The report includes a compilation of present knowledge in the area, research priorities, and proposed measures for dealing with the negative environmental consequences that could arise. The point of departure of the analysis is a description of the properties of lodgepole pine, including species-specific characteristics of the tree, and changes in stand environment and silvicultural management practices that can be expected. The report describes the dispersal capacity of lodgepole pine in its new Swedish environment and the effects of host-parasite interactions. Thereafter, ecological effects on the capacity of the soil for sustainable production and on biological diversity at various scales (tree, stand, landscape) are analysed. Lodgepole pine forestry is also considered in relation to current laws and regulations as well as national and international environmental goals. At the end of the report, a strategy is proposed for handling the inevitable uncertainties associated with the introduction of exotic species 111 refs, 14 figs.

  12. Environmental impact analysis (EIA) concerning lodgepole pine forestry in Sweden; Miljoekonsekvensbeskrivning (MKB) av skogsbruk med contortatall i Sverige

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Bengt; Rosvall, Ola [Forestry Research Inst. of Sweden, Uppsala (Sweden); Engelmark, Ola [Centrum foer ekologisk haallbarhet, Umeaa (Sweden); Sjoeberg, Kjell [Swedish Univ. of Agricultural Sciences, Umeaa (Sweden). Dept. of Animal Ecology

    1999-08-01

    This report presents an analysis of the ecological consequences of forestry with Canadian lodgepole pine introduced into Sweden. The report includes a compilation of present knowledge in the area, research priorities, and proposed measures for dealing with the negative environmental consequences that could arise. The point of departure of the analysis is a description of the properties of lodgepole pine, including species-specific characteristics of the tree, and changes in stand environment and silvicultural management practices that can be expected. The report describes the dispersal capacity of lodgepole pine in its new Swedish environment and the effects of host-parasite interactions. Thereafter, ecological effects on the capacity of the soil for sustainable production and on biological diversity at various scales (tree, stand, landscape) are analysed. Lodgepole pine forestry is also considered in relation to current laws and regulations as well as national and international environmental goals. At the end of the report, a strategy is proposed for handling the inevitable uncertainties associated with the introduction of exotic species 111 refs, 14 figs

  13. Environmental impact assessment applied to planning activities

    International Nuclear Information System (INIS)

    Vismara, R.

    1994-01-01

    Object of EEC (European Economic Community) directive and italian law are certain public and private projects. However, more recent tendency are moving to an application on planning action too. There is no doubt that EIA (Environmental Impact Analysis) on project is very different than EIA on plans. Obviously EIA on a sectorial plan is not an addition of singular EIA on project. The new main objectives shall be: identification of critical areas; identification of interaction between different projects and between different factors; identification of critical project. A methodology to quantify these objectives in matricial form is presented

  14. Geomorphological hazards and environmental impact: Assessment and mapping

    Science.gov (United States)

    Panizza, Mario

    In five sections the author develops the methods for the integration of geomorphological concepts into Environmental Impact and Mapping. The first section introduces the concepts of Impact and Risk through the relationships between Geomorphological Environment and Anthropical Element. The second section proposes a methodology for the determination of Geomorphological Hazard and the identification of Geomorphological Risk. The third section synthesizes the procedure for the compilation of a Geomorphological Hazards Map. The fourth section outlines the concepts of Geomorphological Resource Assessment for the analysis of the Environmental Impact. The fifth section considers the contribution of geomorphological studies and mapping in the procedure for Environmental Impact Assessment.

  15. Public participation in Malawi's environmental impact assessment ...

    African Journals Online (AJOL)

    Since the adoption of the Environmental Management Act of 1996, Malawi has been using environmental impact assessment (EIA) as a tool for predicting and assessing the impact of development projects on the environment. This study assessed the extent of public participation in Malawi's EIA process. Desktop study of ...

  16. Environmental impact assessment in the Nordic Countries

    International Nuclear Information System (INIS)

    Broden, K.; Palsson, S.E.; Poroddsson, P.

    2000-12-01

    A meeting on Environmental Impact Assessment has been held in Iceland, September 2-6, 2000. It was held within the framework of the project NKS/SOS-3 (Radioactive waste), subproject NKS/SOS-3.1 (Environmental Impact Assessment). The meeting included presentations, discussions and a study trip to the Egilsstadir and Myvatn districts. (au)

  17. Environmental impacts of climate change adaptation

    International Nuclear Information System (INIS)

    Enríquez-de-Salamanca, Álvaro; Díaz-Sierra, Rubén; Martín-Aranda, Rosa M.; Santos, Maria J.

    2017-01-01

    Climate change adaptation reduces adverse effects of climate change but may also have undesirable environmental impacts. However, these impacts are yet poorly defined and analysed in the existing literature. To complement this knowledge-gap, we reviewed the literature to unveil the relationship between climate change adaptation and environmental impact assessment, and the degree to which environmental impacts are included in climate change adaptation theory and practice. Our literature review showed that technical, social and economic perspectives on climate change adaptation receive much more attention than the environmental perspective. The scarce interest on the environmental impacts of adaptation may be attributed to (1) an excessive sectoral approach, with dominance of non-environmental perspectives, (2) greater interest in mitigation and direct climate change impacts rather than in adaptation impacts, (3) a tendency to consider adaptation as inherently good, and (4) subjective/preconceived notions on which measures are good or bad, without a comprehensive assessment. Environmental Assessment (EA) has a long established history as an effective tool to include environment into decision-making, although it does not yet guarantee a proper assessment of adaptation, because it is still possible to postpone or even circumvent the processes of assessing the impacts of climate adaptation. Our results suggest that there is a need to address adaptation proactively by including it in EA, to update current policy frameworks, and to demand robust and reliable evaluation of alternatives. Only through the full EA of adaptation measures can we improve our understanding of the primary and secondary impacts of adaptation to global environmental change. - Highlights: • Climate change adaptation may have undesirable environmental impacts. • The impacts of adaptation are yet poorly analysed in the literature. • There is an excessive sectoral approach to adaptation, mainly

  18. Environmental impacts of climate change adaptation

    Energy Technology Data Exchange (ETDEWEB)

    Enríquez-de-Salamanca, Álvaro, E-mail: aenriquez@draba.org [Universidad Nacional de Educación a Distancia (UNED)/Draba Ingeniería y Consultoría Medioambiental, Cañada Nueva, 13, 28200 San Lorenzo de El Escorial (Spain); Díaz-Sierra, Rubén, E-mail: sierra@dfmf.uned.es [Departamento de Física Matemática y de Fluidos, Facultad de Ciencias, Universidad Nacional de Educación a Distancia (UNED), Paseo Senda del Rey, 9, 28040 Madrid (Spain); Martín-Aranda, Rosa M., E-mail: rmartin@ccia.uned.es [Departamento de Química Inorgánica y Química Técnica, Facultad de Ciencias, Universidad Nacional de Educación a Distancia (UNED), Paseo Senda del Rey, 9, 28040 Madrid (Spain); Santos, Maria J., E-mail: M.J.FerreiraDosSantos@uu.nl [Department of Innovation, Environmental and Energy Sciences, Utrecht University, Heidelberglaan 2, 3572 TC Utrecht (Netherlands)

    2017-05-15

    Climate change adaptation reduces adverse effects of climate change but may also have undesirable environmental impacts. However, these impacts are yet poorly defined and analysed in the existing literature. To complement this knowledge-gap, we reviewed the literature to unveil the relationship between climate change adaptation and environmental impact assessment, and the degree to which environmental impacts are included in climate change adaptation theory and practice. Our literature review showed that technical, social and economic perspectives on climate change adaptation receive much more attention than the environmental perspective. The scarce interest on the environmental impacts of adaptation may be attributed to (1) an excessive sectoral approach, with dominance of non-environmental perspectives, (2) greater interest in mitigation and direct climate change impacts rather than in adaptation impacts, (3) a tendency to consider adaptation as inherently good, and (4) subjective/preconceived notions on which measures are good or bad, without a comprehensive assessment. Environmental Assessment (EA) has a long established history as an effective tool to include environment into decision-making, although it does not yet guarantee a proper assessment of adaptation, because it is still possible to postpone or even circumvent the processes of assessing the impacts of climate adaptation. Our results suggest that there is a need to address adaptation proactively by including it in EA, to update current policy frameworks, and to demand robust and reliable evaluation of alternatives. Only through the full EA of adaptation measures can we improve our understanding of the primary and secondary impacts of adaptation to global environmental change. - Highlights: • Climate change adaptation may have undesirable environmental impacts. • The impacts of adaptation are yet poorly analysed in the literature. • There is an excessive sectoral approach to adaptation, mainly

  19. Cogeneration plant noise: Environmental impacts and abatement

    International Nuclear Information System (INIS)

    De Renzio, M.; Ciocca, B.

    1991-01-01

    In Italy, ever increasing attention to environmental problems has led to legislation requiring cogeneration plant owners to perform environmental impact assessments in order to determine plant conformity with pollution laws. This paper, based on an in-depth analysis of physics fundamentals relevant to the nature and effects of noise, examines the principal sources of noise in industrial cogeneration plants and the intensity and range of the effects of this noise on the local environment. A review is then made of the different methods of noise pollution abatement (e.g., heat and corrosion resistant silencers for gas turbines, varying types and thicknesses of acoustic insulation placed in specific locations) that can be effectively applied to cogeneration plant equipment and housing

  20. Comparative study of environmental impact assessment methods ...

    African Journals Online (AJOL)

    This study aims to introduce and systematically investigate the environmental issues during important decision-making stages. Meanwhile, impacts of development on the environmental components will be also analyzed. This research studies various methods of predicting the environmental changes and determining the ...

  1. Transboundary Environmental Impact Assessment : An Introduction

    NARCIS (Netherlands)

    Bastmeijer, C.J.; Koivurova, T.; Bastmeijer, K.; Koivurova, T.

    2008-01-01

    Environmental Impact Assessment (EIA) is a well-established instrument of environmental law and policy that aims to ensure that potential adverse environmental effects of human activities are assessed before decisions on such activities are made. The instrument is increasingly being applied in

  2. NEIMiner: nanomaterial environmental impact data miner.

    Science.gov (United States)

    Tang, Kaizhi; Liu, Xiong; Harper, Stacey L; Steevens, Jeffery A; Xu, Roger

    2013-01-01

    As more engineered nanomaterials (eNM) are developed for a wide range of applications, it is crucial to minimize any unintended environmental impacts resulting from the application of eNM. To realize this vision, industry and policymakers must base risk management decisions on sound scientific information about the environmental fate of eNM, their availability to receptor organisms (eg, uptake), and any resultant biological effects (eg, toxicity). To address this critical need, we developed a model-driven, data mining system called NEIMiner, to study nanomaterial environmental impact (NEI). NEIMiner consists of four components: NEI modeling framework, data integration, data management and access, and model building. The NEI modeling framework defines the scope of NEI modeling and the strategy of integrating NEI models to form a layered, comprehensive predictability. The data integration layer brings together heterogeneous data sources related to NEI via automatic web services and web scraping technologies. The data management and access layer reuses and extends a popular content management system (CMS), Drupal, and consists of modules that model the complex data structure for NEI-related bibliography and characterization data. The model building layer provides an advanced analysis capability for NEI data. Together, these components provide significant value to the process of aggregating and analyzing large-scale distributed NEI data. A prototype of the NEIMiner system is available at http://neiminer.i-a-i.com/.

  3. 78 FR 11593 - Environmental Impact and Related Procedures

    Science.gov (United States)

    2013-02-19

    ... (EA) or environmental impact statement (EIS) under 23 CFR part 771, the repair or reconstruction of... unusual circumstances include significant environmental impacts, substantial controversy on environmental... the action normally has significant environmental impacts either individually or cumulatively and may...

  4. Environmental Impact Assessment and Space Activities

    Science.gov (United States)

    Viikari, L.

    Environmental Impact Assessment (EIA) is a common tool for environment a l protection and management on Earth today, as prior assessment of the environmental consequences of planned activities. It is meant to provide the decision-makers with as comprehensive as possible information about the different environmental effects the proposed activity would entail, including alternative courses of action and the zero-alternative (i.e. the no action alternative). Additionally, plans for mitigation in respect of each alternative are to be outlined. The assessments take account of i.a. environmental impacts on ecosystems, diminution of aesthetic and scientific values, long-term or cumulative effects, as well as transfrontier implications. They also consider issues such as pollution control, environmental protection measures, reporting, post-project analysis, rehabilitation and so on. Also uncertainties in the assessment process are to be expressly presented. Most importantly, a common requirement also is that the results of the impact studies are presented in a way comprehensible to the g neral public,e too. Although the central aspect of the EIA is to provide the decision-makers with scientific information, the process also has other important implications. One of the most relevant of them is the involvement of those people potentially affected in some way by the proposed activity: most EIA systems require in some way the participation of the public, alongside with the relevant governmental authorities and other stake-holders. Such public involvement has various aims and goals: it may serve as a testimony to good governance in general, or be considered in more practical terms as improved planning, due to the concrete contribution of the public to the decision-making process. Obviously, it also is a tool for reducing conflict and developing wider support for the eventual decisions. In short, it enables the public to gain information about planned activities and influence

  5. Environmental impact assessment: Process and implementation

    International Nuclear Information System (INIS)

    Chen, S.Y.; Tsai, S.Y.

    1989-01-01

    In this paper, the procedures and issues regarding the preparation of an environmental impact assessment in accordance with the National Environmental Policy Act (NEPA) as promulgated by the US Congress in 1969 are discussed. NEPA procedures and requirements are covered in general, while particular attention is given to the preparation of the environmental impact assessment. Also included is a discussion of the social impact assessment. The aim of the social impact assessment is to address the social issues involved in enhancing public understanding of the hazardous risks, thereby mitigating any conflicts that may arise in the NEPA process. 3 refs., 1 fig., 1 tab

  6. Submergence analysis of the proposed Ken Betwa Dam (Madhya Pradesh India, using geospatial technology in Environmental Impact Assessments

    Directory of Open Access Journals (Sweden)

    Goparaju Laxmi

    2017-12-01

    Full Text Available This study has analysed the Landsat 8 OLI data (December 2016 to delineate the various land use/land cover classes of the area which will be submerged by the proposed Daudhan/Greater Gangau Dam, which is part of the proposed Ken Betwa River Link Project (in the Madhya Pradesh state of India and also the area likely to be submerged in the Panna Tiger Reserve (PTR. The proposed area of submergence was computed at various full reservoir lengths (FRL, 278 m, 283 m, 288 m, 289 m and 293 m. Similarly the area of submergence for the Panna Tiger Reserve was computed at the mentioned FRLs. It was concluded that a large part of the Panna Tiger Reserve would be submerged and habitat of various animals and plants would be under threat. In comparison with the figures given in the Environmental Impact Assessment certain serious discrepancies and weaknesses were detected and it was felt that they should have been addressed. The results were compared with the EIA – EMP report of the Ken-Betwa link project, Phase 1, prepared by Agricultural Finance Corporation Limited for the National Water Development Agency (Ministry of Water Resources, River Development and Ganga Rejuvenation, Government of India. A proper evaluation of the negative impacts would help when making relevant decisions and appropriate steps to ensure that the loss is kept to a minimum. Safeguarding the biodiversity of forests and wildlife habitats should be the priority as their loss is irreplaceable. Geospatial technology helps in studying the overall spatial view of the proposed submergence area and the visualization gives a clear picture of the likely scenario in the future. It would assist in decision making and mitigation measures.

  7. Predicting on-site environmental impacts of municipal engineering works

    International Nuclear Information System (INIS)

    Gangolells, Marta; Casals, Miquel; Forcada, Núria; Macarulla, Marcel

    2014-01-01

    The research findings fill a gap in the body of knowledge by presenting an effective way to evaluate the significance of on-site environmental impacts of municipal engineering works prior to the construction stage. First, 42 on-site environmental impacts of municipal engineering works were identified by means of a process-oriented approach. Then, 46 indicators and their corresponding significance limits were determined on the basis of a statistical analysis of 25 new-build and remodelling municipal engineering projects. In order to ensure the objectivity of the assessment process, direct and indirect indicators were always based on quantitative data from the municipal engineering project documents. Finally, two case studies were analysed and found to illustrate the practical use of the proposed model. The model highlights the significant environmental impacts of a particular municipal engineering project prior to the construction stage. Consequently, preventive actions can be planned and implemented during on-site activities. The results of the model also allow a comparison of proposed municipal engineering projects and alternatives with respect to the overall on-site environmental impact and the absolute importance of a particular environmental aspect. These findings are useful within the framework of the environmental impact assessment process, as they help to improve the identification and evaluation of on-site environmental aspects of municipal engineering works. The findings may also be of use to construction companies that are willing to implement an environmental management system or simply wish to improve on-site environmental performance in municipal engineering projects. -- Highlights: • We present a model to predict the environmental impacts of municipal engineering works. • It highlights significant on-site environmental impacts prior to the construction stage. • Findings are useful within the environmental impact assessment process. • They also

  8. Predicting on-site environmental impacts of municipal engineering works

    Energy Technology Data Exchange (ETDEWEB)

    Gangolells, Marta, E-mail: marta.gangolells@upc.edu; Casals, Miquel, E-mail: miquel.casals@upc.edu; Forcada, Núria, E-mail: nuria.forcada@upc.edu; Macarulla, Marcel, E-mail: marcel.macarulla@upc.edu

    2014-01-15

    The research findings fill a gap in the body of knowledge by presenting an effective way to evaluate the significance of on-site environmental impacts of municipal engineering works prior to the construction stage. First, 42 on-site environmental impacts of municipal engineering works were identified by means of a process-oriented approach. Then, 46 indicators and their corresponding significance limits were determined on the basis of a statistical analysis of 25 new-build and remodelling municipal engineering projects. In order to ensure the objectivity of the assessment process, direct and indirect indicators were always based on quantitative data from the municipal engineering project documents. Finally, two case studies were analysed and found to illustrate the practical use of the proposed model. The model highlights the significant environmental impacts of a particular municipal engineering project prior to the construction stage. Consequently, preventive actions can be planned and implemented during on-site activities. The results of the model also allow a comparison of proposed municipal engineering projects and alternatives with respect to the overall on-site environmental impact and the absolute importance of a particular environmental aspect. These findings are useful within the framework of the environmental impact assessment process, as they help to improve the identification and evaluation of on-site environmental aspects of municipal engineering works. The findings may also be of use to construction companies that are willing to implement an environmental management system or simply wish to improve on-site environmental performance in municipal engineering projects. -- Highlights: • We present a model to predict the environmental impacts of municipal engineering works. • It highlights significant on-site environmental impacts prior to the construction stage. • Findings are useful within the environmental impact assessment process. • They also

  9. Ecological footprint analysis of environmental impacts by cascaded exploitation of diversion-type small hydropower: a case study in southwest china

    Science.gov (United States)

    Wang, Zhenhua; Li, Qingyun; Huang, Zhuo; Tang, Xianqiang; Zhao, Weihua

    2017-05-01

    Cascaded exploitation of diversion-type small hydropower (SHP) offers a source of new energy as well as socioeconomic benefits; however, it inevitably causes environmental disturbance and damage. Previous studies on the cumulative effect of cascaded diversion SHP rarely discussed using quantitative analysis method. In this paper, the ecological footprint analysis approach is proposed to assess the positive and negative impacts of cascaded diversion SHP on environment of a small-scale river in Southwest China. Positive impact is defined as ecological supply footprint (ESF), which refers to vegetation protection by replacing firewood with SHP. Negative impact is defined as ecological loss footprint (ELF), which includes fish and net primary productivity loss, vegetation destruction and soil erosion. With the raising in the number (n>4) of diversion SHP stations, the difference between ELF and ESF increases remarkably, suggesting that the adverse impacts of cascaded diversion SHP accumulate in the study area. Compared with vegetation destruction and soil erosion, the cumulative loss of fish and net productivity is the most important aspect of the adverse impacts which needs more attentions.

  10. PHYSICAL SPATIAL DEVELOPMENT: A GIS ANALYSIS WITH EMPHASIS ON ENVIRONMENTAL IMPACTS-CASE STUDY NALOS CITY, IRAN

    Directory of Open Access Journals (Sweden)

    F. Naghibi, H. Shirmohammadi

    2008-01-01

    Full Text Available Unplanned urban developments have led to changes in uncontrollable urban spatial structure. For this reasons, informed guidance, principle organization and spatial planning are necessary for urban sprawl and development. In this research, different forms of urban development were considered and development basic barriers including rivers, topography, geology, ecological conditions, facilities and industries were determined and the role of each one was surveyed. Development trends that are based on effective parameters especially environmental impacts were modeled with Geographic Information Systems. The quality of urban planning and management can be upgraded when available and valid data are handled in an advanced manner with the aid of Geographic Information Systems. The innovative technology can support planning and decision making by offering relatively quick response on analytical questions and monitoring issues. Experienced expert determined the degree and primacy of urban sprawl and development parameters generally and for nalos case study, these parameters and criteria and their weights were marked, then were modeled with Geographic Information Systems for nalos developments. With using GIS and it capabilities in calculation of land size forecasting for Nalos development and its positioning we could take a step in planning directions such as sustainable development achievements.

  11. The regional environmental impact of biomass production

    International Nuclear Information System (INIS)

    Graham, R.L.

    1994-01-01

    The objective of this paper is to present a broad overview of the potential environmental impacts of biomass energy from energy crops. The subject is complex because the environmental impact of using biomass for energy must be considered in the context of alternative energy options while the environmental impact of producing biomass from energy crops must be considered in the context of the alternative land-uses. Using biomass-derived energy can reduce greenhouse gas emissions or increase them; growing biomass energy crops can enhance soil fertility or degrade it. Without knowing the context of the biomass energy, one can say little about its specific environmental impacts. The primary focus of this paper is an evaluation of the environmental impacts of growing energy crops. I present an approach for quantitatively evaluating the potential environmental impact of growing energy crops at a regional scale that accounts for the environmental and economic context of the crops. However, to set the stage for this discussion, I begin by comparing the environmental advantages and disadvantages of biomass-derived energy relative to other energy alternatives such as coal, hydropower, nuclear power, oil/gasoline, natural gas and photovoltaics

  12. Discussion on the method of environmental radiological impact assessment for the highway construction project

    International Nuclear Information System (INIS)

    Qiu Guohua

    2008-01-01

    Based on the characteristics and environmental radiological impact of the highway construction project, the basic procedure of environmental radiological impact assessment for the highway construction project is put forward, including analysis and determination of contamination sources, selection of evaluation factors, determination of assessment range and dose limit, environmental investigation, environmental impact prediction and assessment. The working method of each procedure is analyzed. (authors)

  13. Cumulative Impact Assessment: Approaching Environmental Capacity in Development Area Using Environmental Impact Assessment Information

    Science.gov (United States)

    Cho, N.; Lee, M. J.; Maeng, J. H.

    2017-12-01

    Environmental impact assessment estimates the impact of development as a business unit and establishes mitigation plan. If the development is done, its economic effects can spread to the nearby areas. So that various developments can be distributed at different time intervals. The impact of the new developments can be combined with existing environmental impacts and can have a larger impact. That is, Cumulative impact assessment is needed to consider the environmental capacity of the Nearby area. Cumulative impact assessments require policy tools such as environmental impact assessment information and cumulative impact estimation models. In Korea, environmental information (water quality, air quality, etc.) of the development site is measured for environmental impact assessment and monitored for a certain period (generally 5 years) after the project. In addition, by constructing the environmental information as a spatial database, it is possible to express the environmental impact on a regional basis spatially and to intuitively use it for development site selection. Utilizing a composite model of environmental impact assessment information and Remote Sensing data for cumulative impact estimation, That can be used as a policy decision support tool that provides quantitative information for development area management, such as time series effect and sprawl phenomenon.

  14. Resource Contingency Program : Draft Environmental Impact Statement.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1995-02-01

    In 1990, the Bonneville Power Administration (BPA) embarked upon the Resource Contingency Program (RCP) to fulfill its statutory responsibilities to supply electrical power to its utility, industrial and other customers in the Pacific Northwest. Instead of buying or building generating plants now, BPA has purchased options to acquire power later if needed. Three option development agreements were signed in September 1993 with three proposed natural gas-fired, combined cycle combustion turbine CT projects near Chehalis and Satsop Washington and near Hermiston, Oregon. This environmental impact statement addresses the environmental consequences of purchasing power from these options. This environmental impact statement addresses the environmental consequences of purchasing power from these options.

  15. Environmental impact assessment of coal power plants in operation

    Directory of Open Access Journals (Sweden)

    Bartan Ayfer

    2017-01-01

    Full Text Available Coal power plants constitute an important component of the energy mix in many countries. However, coal power plants can cause several environmental risks such as: climate change and biodiversity loss. In this study, a tool has been proposed to calculate the environmental impact of a coal-fired thermal power plant in operation by using multi-criteria scoring and fuzzy logic method. We take into account the following environmental parameters in our tool: CO, SO2, NOx, particulate matter, fly ash, bottom ash, the cooling water intake impact on aquatic biota, and the thermal pollution. In the proposed tool, the boundaries of the fuzzy logic membership functions were established taking into account the threshold values of the environmental parameters which were defined in the environmental legislation. Scoring of these environmental parameters were done with the statistical analysis of the environmental monitoring data of the power plant and by using the documented evidences that were obtained during the site visits. The proposed method estimates each environmental impact factor level separately and then aggregates them by calculating the Environmental Impact Score (EIS. The proposed method uses environmental monitoring data and documented evidence instead of using simulation models. The proposed method has been applied to the 4 coal-fired power plants that have been operation in Turkey. The Environmental Impact Score was obtained for each power plant and their environmental performances were compared. It is expected that those environmental impact assessments will contribute to the decision-making process for environmental investments to those plants. The main advantage of the proposed method is its flexibility and ease of use.

  16. Environmental impact assessment of coal power plants in operation

    Science.gov (United States)

    Bartan, Ayfer; Kucukali, Serhat; Ar, Irfan

    2017-11-01

    Coal power plants constitute an important component of the energy mix in many countries. However, coal power plants can cause several environmental risks such as: climate change and biodiversity loss. In this study, a tool has been proposed to calculate the environmental impact of a coal-fired thermal power plant in operation by using multi-criteria scoring and fuzzy logic method. We take into account the following environmental parameters in our tool: CO, SO2, NOx, particulate matter, fly ash, bottom ash, the cooling water intake impact on aquatic biota, and the thermal pollution. In the proposed tool, the boundaries of the fuzzy logic membership functions were established taking into account the threshold values of the environmental parameters which were defined in the environmental legislation. Scoring of these environmental parameters were done with the statistical analysis of the environmental monitoring data of the power plant and by using the documented evidences that were obtained during the site visits. The proposed method estimates each environmental impact factor level separately and then aggregates them by calculating the Environmental Impact Score (EIS). The proposed method uses environmental monitoring data and documented evidence instead of using simulation models. The proposed method has been applied to the 4 coal-fired power plants that have been operation in Turkey. The Environmental Impact Score was obtained for each power plant and their environmental performances were compared. It is expected that those environmental impact assessments will contribute to the decision-making process for environmental investments to those plants. The main advantage of the proposed method is its flexibility and ease of use.

  17. Environmental impacts on technical products

    International Nuclear Information System (INIS)

    1991-01-01

    The interaction between an object and its environment is examined by methods of environment simulation. With regard to possible synergisms, technical considerations and holistic thinking are essential. Environmental simulation is mainly concerned with questions of ability to function and the service life of technical products in their environment. The environmental simulation is used to discover cause/effect mechanisms in ageing and weathering processes. Questions of artificial ageing and speeded up time tests play a great part here. (orig.) [de

  18. Environmental Impact Optimization of Reinforced Concrete Slab Frame Bridges

    DEFF Research Database (Denmark)

    Yavari, Majid Solat; Du, Guangli; Pacoste, Costin

    2017-01-01

    The main objective of this research is to integrate environmental impact optimization in the structural design of reinforced concrete slab frame bridges in order to determine the most environmental-friendly design. The case study bridge used in this work was also investigated in a previous paper...... focusing on the optimization of the investment cost, while the present study focuses on environmental impact optimization and comparing the results of both of these studies. Optimization technique based on the pattern search method was implemented. Moreover, a comprehensive Life Cycle Assessment (LCA......) methodology of ReCiPe and two monetary weighting systems were used to convert environmental impacts into monetary costs. The analysis showed that both monetary weighting systems led to the same results. Furthermore, optimization based on environmental impact generated models with thinner construction elements...

  19. Application of a Method for Intelligent Multi-Criteria Analysis of the Environmental Impact of Tailing Ponds in Northern Kosovo and Metohija

    Directory of Open Access Journals (Sweden)

    Gordana Milentijević

    2016-11-01

    Full Text Available The technological process of exploitation of mineral resources and processing of mined ores to cater to the market results, among other things, in a large amount of tailings deposed on tailing ponds. Because of the chemical composition of the material, the increasing amount of waste, and the mismanagement of recovery and reclamation of ponds, these ponds have become a significant element of negative impact on the surrounding ecosystem. Economics was behind the discharging of this material, resulting in tailing ponds created in inappropriate areas. There is an ongoing process of depositing tailings on old tailing ponds, although no special attention has been paid to the subsequent effect on the environment. Application of intelligent multi-criteria analysis AHP and PROMETHEE has been performed in this paper for the purpose of ranking the degree of negative impact on the environment of tailing ponds. Analysis is performed for five tailing ponds of MMCC (Mining Metallurgy Chemical Combine “Trepča”, whereby two of the ponds are active and three inactive. The ponds are in relatively close proximity to the municipalities of Zvečan and Kosovska Mitrovica, to the north of Kosovo and Metohija, Republic of Serbia. In order to achieve the most objective results, the AHP and PROMETHEE methods were applied. By using these methods for calculations, the following ranking for the flotation tailing waste deposits was obtained, regarding their environmental impact: Žitkovac, Tvrđanski Do, Bostanište, Gornje Polje and Žarkov Potok. This result can contribute to the decision-making process of a prioritizing strategy for rehabilitation and remediation of these five flotation tailings. The analysis illustrates that application of intelligent multi-criteria analysis is a useful environmental management tool to be included in the decision-making process.

  20. Environmental impact assessment for energy pathways: an integrated methodology

    International Nuclear Information System (INIS)

    Sommereux-Blanc, Isabelle

    2010-01-01

    This document presents the synthesis of my research work contributing to the development of an integrated methodology of environmental impact assessment for energy pathways. In the context of world globalization, environmental impact assessments issues are highly linked with the following questioning: Which environmental impacts? for which demand? at which location? at which temporal scale? My work is built upon the definition of a conceptual framework able to handle these issues and upon its progressive implementation. The integration of the spatial and temporal issues within the methodology are key elements. Fundamental cornerstones of this framework are presented along the DPSIR concept (Driving forces, Pressures, State, Impacts, Responses). They cover a comprehensive analysis of the limits and the relevance of life cycle analysis and the development of a geo-spatialized environmental performance approach for an electrical production pathway. Perspectives linked with the development of this integrated methodology are detailed for energy pathways. (author)

  1. Environmental impact of Yucca Mountain Repository

    International Nuclear Information System (INIS)

    Ahn, Joonhong

    2005-01-01

    Environmental impact of the Yucca Mountain Repository (YMR) has been quantitatively evaluated in terms of the radiotoxicity of transuranic (TRU) and fission-product radionuclides existing in the environment after released from failed packages. Inventory abstraction has been made based on the data published in Final Environmental Impact Statement published by US DOE. Mathematical model and computation code have been developed based on analytical solutions. Environmental impact from the commercial spent nuclear fuel (CSNF) packages is about 90% of the total impact including the contribution from defense waste (DW) packages. Impacts due to isotopes of Cm, Am, Pu and Np, and their decay daughters are dominant, compared with those from fission-product nuclides. Numerical results show that reduction of the TRU nuclides by a factor of 100 makes the impact from CSNF smaller than that from DW. (author)

  2. Impacts of Environmental Discourse on Environmental Art and its Traps

    Directory of Open Access Journals (Sweden)

    Tanja Plešivčnik

    2015-04-01

    Full Text Available The paper examines the field of environmental art and assesses the impacts of the prevailing environmental discourse on environmental and ecological topics in the development of art. It shows how the popularization of environmental discourse and environmental themes encouraged the growth of art that is entirely focused on its ecological and environmental contexts. In the context of researching art in terms of promoting deep and positive changes in the appreciation of the environment and nature, this research also stresses the importance of the aesthetic experience of the environment in artistic creation. Exploring this approach reveals key differences between artists who focus on solving ecological problems and aesthetically engaged artists who adopt a deep and inclusive focus on the environment itself.

  3. Assigment of environmental aspect and impacts

    Directory of Open Access Journals (Sweden)

    Hanzelová Marcela

    2001-12-01

    Full Text Available Environmental management system (EMS is a part of the management system that includes the organizational structure, planning activities, responsibilities, practices, procedures, processes and resources for developing, implementing, achieving, reviewing and maintaining the environmental policy. The EMS provides the order and consistency for organizations to adress environmental cocerns through the allocation of resources, assignment of responsibilities, and the ongoing evaluation of practices, procedures and processes. The ISO 14001 requires the implementation of the EMS in accordance with defined, internationally recognized standards. The ISO standard specifies requirements for establishing an environmental policy, determining environmental aspects & impacts of products (activities services, planning environmental objectives and measurable targets, implementation & operation of programs to meet objectives and targets, checking &corrective action, and management review. The Environmental aspect is an element of organization’s activities, product or services that can interact with the environment. A significant environmental aspect is that with a significant environmental impact. The environmental impact is any change to the environment, whether adverse or beneficial wholly or partially resulting from an oranization’s activities, products or services.

  4. Southpoint power plant final environmental impact statement

    International Nuclear Information System (INIS)

    1999-01-01

    This document is the Final Environmental Impact Statement (FEIS) for a proposed lease of acreage on the Fort Mojave Indian Reservation in Mohave County, Arizona for development of a natural gas fired 500 megawatt combined cycle power plant. The Bureau of Indian Affairs (BIA) serves as the federal lead agency and the Fort Mojave Indian Tribe (FMIT) and the Western Area Power Administration (WAPA) are cooperating agencies for the EIS process. The purpose of this document is to provide information to the public and to interested public agencies regarding the environmental consequences of the approval of a long-term lease for the construction and operation of the proposed Southpoint power plant. The FEIS, prepared by Hallock/Gross, Inc. under the direction of the BIA and in cooperation with the FMIT and WAPA, addresses the comparative analysis of alternatives and evaluates the environmental consequences of such alternatives on various resources and addresses public comments. A number of technical reports were used in the preparation of the Draft EIS and FEIS and are available for review as Appendices to this document under separate cover that can be reviewed at the BIA offices which are listed

  5. Reducing the Environmental Impact of Clinical Laboratories.

    Science.gov (United States)

    Lopez, Joseph B; Jackson, David; Gammie, Alistair; Badrick, Tony

    2017-02-01

    Healthcare is a significant contributor to environmental impact but this has received little attention. The typical laboratory uses far more energy and water per unit area than the typical office building. There is a need to sensitise laboratories to the importance of adopting good environmental practices. Since this comes at an initial cost, it is vital to obtain senior management support. Convincing management of the various tangible and intangible benefits that can accrue in the long run should help achieve this support. Many good environmental practices do not have a cost but will require a change in the culture and mind-set of the organisation. Continuing education and training are important keys to successful implementation of good practices. There is a need to undertake a rigorous cost-benefit analysis of every change that is introduced in going green. The adoption of good practices can eventually lead to ISO certification if this is desired. This paper provides suggestions that will allow a laboratory to start going green. It will allow the industry to enhance its corporate citizenship whilst improving its competitive advantage for long-term.

  6. An oilspill risk analysis for the Gulf of Mexico outer continental shelf lease area; regional environmental impact statement

    Science.gov (United States)

    LaBelle, R.P.

    1982-01-01

    An oilspill risk analysis was conducted for the Gulf of Mexico Outer Continental Shelf (OCS)lease area region. Results of the analysis can be used to determine relative risks associated with oil production in different regions to be offered in OCS Lease Sales 72, 74, and 79. The analysis considered the probability of spill occurrences based on historical trends; likely movement of oil slicks based on a climatological model; and locations of major environmental resources which could be vulnerable to spilled oil. The times between spill occurrence and contact with resources were estimated to aid in estimating slick characteristics. Critical assumptions made for this particular analysis were (1) that oil exists in the lease area, and (2) that oil will be, found and produced from tracts sold in sales 72, 74, and 79. On the basis of a most likely resource estimate of 241 million barrels of oil to be produced over an 18-year production life from sales to be held in 1983 (sales 72, 74, 79), it was calculated that approximately one oilspill of 1,000 barrels or larger will occur. The estimated probability that one or more oilspills of 1,000 barrels or larger will occur and contact land after being at sea less than 30 days is 41-percent. For a high resource estimate case of sales to be held in 1983, 717 million barrels are estimated to be produced over an 18-year production life with an 83-percent chance of one or more spills of 1,000 barrels or larger occurring and contacting land within 30 days. These results depend upon the routes and methods chosen to transport oil from OCS platforms to shore. Given a total development scenario in which 5.6 billion barrels of oil are estimated to be present and produced, it was calculated that 18 oilspills of 1,000 barrels or larger will occur over the 40-year production life of the proposed lease area. The estimated probability that one or more oilspills of 1,000 barrels or larger will occur and contact land after being at sea less than

  7. Predicting on-site environmental impacts of municipal engineering works

    OpenAIRE

    Gangolells Solanellas, Marta; Casals Casanova, Miquel; Forcada Matheu, Núria; Macarulla Martí, Marcel

    2014-01-01

    The research findings fill a gap in the body of knowledge by presenting an effective way to evaluate the significance of on-site environmental impacts of municipal engineering works prior to the construction stage. First, 42 on-site environmental impacts of municipal engineering works were identified by means of a process-oriented approach. Then, 46 indicators and their corresponding significance limits were determined on the basis of a statistical analysis of 25 new-build and remodelling mun...

  8. Alpha Fuels Environmental Test Facility impact gun

    International Nuclear Information System (INIS)

    Anderson, C.G.

    1978-01-01

    The Alpha Fuels Environmental Test Facility (AFETF) impact gun is a unique tool for impact testing 238 PuO 2 -fueled heat sources of up to 178-mm dia at velocities to 300 m/s. An environmentally-sealed vacuum chamber at the muzzle of the gun allows preheating of the projectile to 1,000 0 C. Immediately prior to impact, the heat source projectile is completely sealed in a vacuum-tight catching container to prevent escape of its radioactive contents should rupture occur. The impact velocity delivered by this gas-powered gun can be regulated to within +-2%

  9. Environmental Impact Assessment in Sustainable Water Resources ...

    African Journals Online (AJOL)

    During project study and design, major environmental impacts of water ... should be identified and made available for decision makers and the public. ... remotely sensed data can be analysed in GIS environment to generate data and map the ...

  10. Environmental impacts of Proalcool: production and consumption

    International Nuclear Information System (INIS)

    Magrini, A.; Nassi, C.D.; Barcellos, P.P.

    1992-01-01

    The environmental impacts caused by the Programa Nacional do Alcool -PROALCOOL - Brazil, are analysed. Rio de Janeiro and Sao Paulo States are studied, comparing the regional differences. The production and the consumption phases are analysed separately. (L.J.C.)

  11. Environmental economic impact assessment in China: Problems and prospects

    International Nuclear Information System (INIS)

    Lindhjem, Henrik; Hu Tao; Ma Zhong; Skjelvik, John Magne; Song Guojun; Vennemo, Haakon; Wu Jian; Zhang Shiqiu

    2007-01-01

    The use of economic valuation methods to assess environmental impacts of projects and policies has grown considerably in recent years. However, environmental valuation appears to have developed independently of regulations and practice of environmental impact assessment (EIA), despite its potential benefits to the EIA process. Environmental valuation may be useful in judging significance of impacts, determining mitigation level, comparing alternatives and generally enabling a more objective analysis of tradeoffs. In China, laws and regulations require the use of environmental valuation in EIA, but current practice lags far behind. This paper assesses the problems and prospects of introducing environmental valuation into the EIA process in China. We conduct four case studies of environmental economic impact assessment (EEIA), three of which are based on environmental impact statements of construction projects (a power plant, a wastewater treatment plant and a road construction project) and one for a regional pollution problem (wastewater irrigation). The paper demonstrates the potential usefulness of environmental valuation but also discusses several challenges to the introduction and wider use of EEIA, many of which are likely to be of relevance far beyond the Chinese context. The paper closes with suggesting some initial core elements of an EEIA guideline

  12. Environmental impact of Converted Electrical Motorcycle

    OpenAIRE

    Xuan, Pek Yang; Henz, Martin; Weigl, Joerg

    2013-01-01

    This study explores the environmental impact of the conversion of an internal combustion engine (ICE) sports motorcycle into a converted battery-powered electric vehicle (CBEV). Zero tailpipe emissions might lead to the assumption that such an ICE-to-BEV conversion will always yield net positive environmental benefits in life cycle greenhouse gas (GHG) emissions and energy reductions, but energy inputs and materials impacts associated with the conversion of a CBEV are weighed against savings ...

  13. Assessing Environmental Impact on Aquatic Macrophyte Species ...

    African Journals Online (AJOL)

    Impact of environmental variables on distribution and composition of aquatic macrophyte community in a tropical river was assessed for one year (March 2009 to February 2010). Hypothesis tested was that the spatial variation in environmental variables on the river's longitudinal gradient affects macrophyte species ...

  14. The environmental impact of irradiation plants

    International Nuclear Information System (INIS)

    Bennett, N; Langley, R; Reuter, G

    1998-01-01

    The radiation sterilization of disposable medical devices and other medical products brings major benefits to mankind. Furthermore there are potential opportunities to use the irradiation process to significantly improve our environment. Careful examination of the environmental impact of both electron beam and gamma irradiators confirms that these major benefits are not achieved at any significant environmental cost

  15. Environmental impact of energy systems in Lithuania

    International Nuclear Information System (INIS)

    Jancauscas, V.; Mishkins, V.

    1994-04-01

    Environmental impact of energy systems and an improvement of environmental situation in Lithuania are discussed. The number of polluting plants exceeds 40 thousand, the most harmful are power plants and boilers. The non-homogenous distribution of power and industrial plants cause very different contamination in Lithuania. fig

  16. Study design considerations in evaluating environmental impacts

    Science.gov (United States)

    Stan T. Lebow; Paul A. Cooper; Patricia Lebow

    2006-01-01

    The purpose of this chapter is to make the reader aware of how choices in study parameters may influence the outcome of treated-wood environmental impact evaluations. Evaluation of the leaching and environmental accumulation of preservatives from treated wood is a complex process. and many factors can influence the results of such studies. In laboratory studies, the...

  17. Energy Resources of Iran and Their Environmental Impacts

    Directory of Open Access Journals (Sweden)

    V. P. Bubnov

    2013-01-01

    Full Text Available The paper presents an analysis of main sources of energy resource production and their sale  in the domestic and export markets. The authors have analyzed type of domestic energy consumers and estimated their environmental impacts. The paper shows that the shift to alternative energy sources will reduce an ecological impact on the environment.

  18. Environmental impact assessment - a selected bibliography

    International Nuclear Information System (INIS)

    Lawson, W.J.

    1989-01-01

    This bibliography of literature relevant to the environmental impact assessment process is essentially a list of material dealing with the environmental impact assessment process held by Griffith University Library. The list is however well supplemented with citations of material not held in the Griffith University Library. Some economic and social impact assessment citations have been included in the bibliography, as the the environmental impact assessment concept has been interpreted very broadly. The citations are arranged according to broad subject areas, such as methodology, critical reviews, social impacts etc. Citations in each of these subject areas, which are listed in the table of contents, are identified by prefixes which are given in parentheses before the subjects headings. Within each subject area the citations are arragend in alphabetic author sequence

  19. 78 FR 59414 - Environmental Impact Statement; King County, Washington

    Science.gov (United States)

    2013-09-26

    ... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Environmental Impact Statement; King... prepare an environmental impact statement. SUMMARY: The Federal Highway Administration is issuing this notice to advise the public that an Environmental Impact Statement (EIS) will be prepared for a proposed...

  20. 77 FR 25782 - Environmental Impact Statement: Madison County, IL

    Science.gov (United States)

    2012-05-01

    ... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Environmental Impact Statement...: The FHWA is issuing this notice of intent to advise the public that an Environmental Impact Statement... the Illinois Department of Transportation (IDOT) will prepare an Environmental Impact Statement (EIS...

  1. 77 FR 25781 - Environmental Impact Statement; Washington, DC

    Science.gov (United States)

    2012-05-01

    ... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Environmental Impact Statement... Columbia, Department of Transportation. ACTION: Notice of Intent to Prepare a Draft Environmental Impact... agencies and the public that a Draft Environmental Impact Statement (DEIS) will be prepared to assess the...

  2. Supplemental results of the human health risk analysis for the U.S. Department of Energy draft waste management programmatic environmental impact statement

    International Nuclear Information System (INIS)

    1995-08-01

    This report is intended as an information supplement to the human health risk analysis performed for the US Department of Energy's Draft Waste Management Programmatic Environmental Impact Statement for Managing Treatment, Storage, and Disposal of Radioactive and Hazardous Waste, hereinafter called the PEIS. This report provides the installation-by-installation human health risk analysis results from which the risk estimate summaries for the PEIS were drawn. Readers should bear in mind that the risk estimates presented here are the result of a program-wide (as opposed to site-specific) study. They are based on best available data; systematically applied assumptions; and professional judgment about DOE waste inventories, waste volumes generated annually, currently available treatment and disposal technologies, technical limitations of treatment, and facility capacities across the numerous installations in the DOE complex

  3. Time-motion analysis as a novel approach for evaluating the impact of environmental heat exposure on labor loss in agriculture workers

    DEFF Research Database (Denmark)

    Ioannou, Leonidas G; Tsoutsoubi, Lydia; Samoutis, George

    2017-01-01

    .6% of the variance in WTL (p manager's WTL estimate was too optimistic (p Time-motion analysis accurately assesses WTL, evaluating every second spent by each worker during every work shift......Introduction: In this study we (i) introduced time-motion analysis for assessing the impact of workplace heat on the work shift time spent doing labor (WTL) of grape-picking workers, (ii) examined whether seasonal environmental differences can influence their WTL, and (iii) investigated whether...... their WTL can be assessed by monitoring productivity or the vineyard manager's estimate of WTL. Methods: Seven grape-picking workers were assessed during the summer and/or autumn via video throughout four work shifts. Results: Air temperature (26.8 ± 4.8°C), wet bulb globe temperature (WBGT; 25.2 ± 4.1°C...

  4. A study on the environmental impact analysis with life cycle assessment of O and M in NPP

    International Nuclear Information System (INIS)

    Jeong, H. S.; Kim, S. S.; Yoon, S. W.; Yang, M. H.; Kim, H. Z.

    2002-01-01

    In the modern times, characterized by mass-consumption, technologies have to evaluated not only in terms of usefulness but also in the aspects of resources exhaustion and environmental destruction. This study quantified environmental burdens from the stage of operation and maintenance in selected nuclear power plants. Four factors are evaluated, such as green house gas, hydrosphere, atmosphere and resources exhaustion for the selected PWR and PHWR with life cycle assessment(LCA)

  5. Environmental impacts of climate change adaptation

    NARCIS (Netherlands)

    Enriquez-de-Salamanca, Alvaro; Diaz Sierra, R.; Martin-Aranda, Rosa; Ferreira Dos Santos, M.J.

    Climate change adaptation reduces adverse effects of climate change but may also have undesirable environmental impacts. However, these impacts are yet poorly defined and analysed in the existing literature. To complement this knowledge-gap, we reviewed the literature to unveil the relationship

  6. Environmental impacts assessment of industrial estate providing with managerial process

    Energy Technology Data Exchange (ETDEWEB)

    Nouri, J.; Mahvi, A.H.; Younesian, M.; Nabizadeh, R.; Hashemi, I. [Univ. of Tehran (Iran)

    2007-07-01

    The existence of balance, coordination and required order among natural elements is one of the key factors in the ecosystem. If this balance is disturbed under certain circumstances, it will damage the structure of living existences and more specifically human beings. Since a half century ago, factors such as important economical and industrial activites, advanced technologies together with growing population and lack of concordance among different couhntries to take optimal advantage of the existing natural resources have distrubed the balance in the ecosystem. As a result, man has caused many problems such as high death tolls and arduous diseases due to the different pollutions in water, air, land, sound, temperature, etc and factors such as erosion, desert, expansion, floods, extinction of plant and animal species, ozone layer destruction, global warming, sea level rise and greenhouse gases increase. Environmental Impact Assessment (EIA) is to recognize and assess systematic consequences of projects and programs on elements like physicochemical, biological, cultural, economical and social phenomena in th environment; in other words it is a way or method to determine the direction of predication and assessment of environmental impacts of activities on the environmental health of the ecosystem affecting human lives. In this study, and environmental impact assessment of the establishment of the Shahzand Industrial Estate in Arak at the central part of Iran was investigated. After collection of data and analysis of the findings, the positive and negative impacts resulting from establishment of the indutrial estate were investigated using the Leopold Matrix and Scaling checklist methods providing the managerial solutions in order to minimize the harmful environmental impacts. The existing environmental situation was investigated and then environmental impact alternatives were determined. This was done in regard to the amount and kind of predicted pollution for the

  7. Comparing Distributions of Environmental Outcomes for Regulatory Environmental Justice Analysis

    Directory of Open Access Journals (Sweden)

    Glenn Sheriff

    2011-05-01

    Full Text Available Economists have long been interested in measuring distributional impacts of policy interventions. As environmental justice (EJ emerged as an ethical issue in the 1970s, the academic literature has provided statistical analyses of the incidence and causes of various environmental outcomes as they relate to race, income, and other demographic variables. In the context of regulatory impacts, however, there is a lack of consensus regarding what information is relevant for EJ analysis, and how best to present it. This paper helps frame the discussion by suggesting a set of questions fundamental to regulatory EJ analysis, reviewing past approaches to quantifying distributional equity, and discussing the potential for adapting existing tools to the regulatory context.

  8. Methods of Environmental Impact Assessment in Colombia

    Directory of Open Access Journals (Sweden)

    Javier Toro Calderón

    2013-10-01

    Full Text Available The Environmental Impact Assessment (EIA in Colombia constitutes the primary tool for making decisions with respect to projects, works and activities (PWA with potential for significant environmental impacts. In the case of the infrastructure of the PWA, the EIA is mandatory and determines the environmental license (EL for construction and operation. This paper analyzes the methods used to assess the environmental impact of the PWA that have applied for licenses with the Ministry of Environment and Sustainable Development. It was found that the method most frequently used is the qualitative proposal by Conesa, with modifications that reduce the effectiveness of the EIA and favor the subjectivity and bias of the evaluator. Finally a series of recom­mendations to improve the process in the country are proposed.

  9. Assessing environmental impacts in a life cycle perspective

    DEFF Research Database (Denmark)

    Hauschild, Michael Zwicky

    2005-01-01

    is focused on the product system which comprises all the processes which the product and its components meet throughout their lives- from the extraction of raw materials via manufacture, use and waste management to final disposal, or in short from the cradle to the grave (see Figure 1). The focus......What are the environmental impacts from an armchairor a cellular phone or a steak, if you take into account all the activities needed to produce, maintain, use or consume and eventually dispose of it? Life cycle impact assessment is the part of life cycle assessment (LCA) where the inventory...... of material flows in the life cycle of a product are translated into environmental impacts and consumption of resources, and questions like these are given an answer. The environmental impacts may range from very local (e.g. land use) to global (like climate change). As an environmental analysis tool, LCA...

  10. 21 CFR 25.42 - Environmental impact statements.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Environmental impact statements. 25.42 Section 25... ENVIRONMENTAL IMPACT CONSIDERATIONS Preparation of Environmental Documents § 25.42 Environmental impact... be a clear, concise, and detailed written statement describing: (1) The environmental impacts of a...

  11. Is Environmental Impact Assessment fulfilling its potential?

    DEFF Research Database (Denmark)

    Larsen, Sanne Vammen

    2014-01-01

    fuel with CO2-neutral energy sources. A variety of these projects are subject to environmental impact assessment (EIA), which raises the following questions: What role does an impact assessment play? When is the project environmentally friendly? How are climate change-related impacts assessed......One of the topics receiving much attention in recent years is climate change and the potential of its integration in impact assessment, both in terms of achieving mitigation and adaptation. Renewable energy projects are part of the efforts to mitigate climate change, replacing the use of fossil...... adaptation is absent. Also, the results show an emphasis on positive impacts in the reports, and in a few cases discussions of enhancements. Identification and assessment of negative climate change impacts are less apparent. This leads to a discussion of the results in the light of the purpose of EIA....

  12. Environmental impact of energy production

    International Nuclear Information System (INIS)

    Lidgate, David

    1992-01-01

    Care of the environment is set to be one of the growth industries of the 1990s. Unfortunately, information as to the effect current life styles are having on the environment and, therefore, what remedial action is necessary, varies from the full to the non-existent and, worst of all, from the misleading to the incorrect. For various reasons, some aspects of technology have received greater attention from the media and environmental pressure groups than others. Energy production and conversion technologies, of course, are very much in this category. Indeed, the problem in these areas is not lack of information but a positive surfeit. (author)

  13. Evaluation of the environmental impact in Mexico

    International Nuclear Information System (INIS)

    Mendoza, O.

    2004-01-01

    The present work, shows the origin and development of the evaluation of the environmental impact in Mexico, like juridical-environmental instrument, it is the environmental politics' s instrument that is relatively new, with the time it has suffered modifications of technical, administrative, law and conceptual nature. It has changed in substantial form, its importance inside the general outline of protection of the natural resources of Mexico, which is reflected in the structure of the organisms that are responsible for applying it. The objectives of the work embrace describing the antecedents of the evaluation of the environmental impact, to provide a reference mark, and to observe the evolution of this juridical instrument, as well as to summarize more outstanding aspects of the evaluation of the environmental impact; making emphasis in the form like it has been related with the environmental politics' s instruments; and to point out the changes that the procedure of evaluation of the environmental impact has fomented in the development outlines, in the technology and even in the human thought. The results of the evaluation and dictamination of the projects that entered to the procedure of environmental impact in the period 1995-2000 are observed that of the 6,100 entered projects, 5,533 were resolved, which means that answer was given to 91% of the total of projects that entered; of the work it can be concluded that this juridical-environmental instrument, it has evolved with the step of the time and it has left adapting according to the juridical, administrative procedures, technicians and of sustainable development of Mexico

  14. The National Environmental Policy Act and DOE's programmatic environmental impact statement

    International Nuclear Information System (INIS)

    Wisenbaker, W.E.

    1991-01-01

    The National Environmental Policy Act (NEPA) of 1969 requires that all agencies of the federal government prepare a detailed statement on any action significantly affecting the quality of the human environment. Such a statement must include the environmental impact of the proposed action, any adverse environmental effects that cannot be avoided should the proposed action be implemented, and alternatives to the proposed action. In requiring environmental statements, NEPA encourages viewing related actions collectively and looking at cumulative impacts. A programmatic environmental impact statement (PEIS) is a broad environmental analysis of a program or policy prepared when actions are connected and may have cumulative environmental impacts. The PEIS benefits include providing input into an agency's planning and decision making, assessing potential environmental consequences of a wide range of alternatives before options have been foreclosed, and allowing consideration of systemwide impacts of various alternatives early in the decision-making process. The US Department of Energy (DOE) will prepare its PEIS on Environmental Restoration and Waste Management program. The PEIS will consider programmatic issues and integrated approaches to the program; address national, program-wide alternatives rather than site-specific actions; and provide for subsequent NEPA documents of narrower scope to be prepared to address site-specific or project-specific actions

  15. Puget Sound Area Electric Reliability Plan. Appendix D, Conservation, Load Management and Fuel Switching Analysis : Draft Environmental Impact Statement.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1991-09-01

    Various conservation, load management, and fuel switching programs were considered as ways to reduce or shift system peak load. These programs operate at the end-use level, such as residential water heat. Figure D-1a shows what electricity consumption for water heat looks like on normal and extreme peak days. Load management programs, such as water heat control, are designed to reduce electricity consumption at the time of system peak. On the coldest day in average winter, system load peaks near 8:00 a.m. In a winter with extremely cold weather, electricity consumption increases fr all hours, and the system peak shifts to later in the morning. System load shapes in the Puget Sound area are shown in Figure D-1b for a normal winter peak day (February 2, 1988) and extreme peak day (February 3, 1989). Peak savings from any program are calculated to be the reduction in loads on the entire system at the hour of system peak. Peak savings for all programs are measured at 8:00 a.m. on a normal peak day and 9:00 a.m. on an extreme peak day. On extremely cold day, some water heat load shifts to much later in the morning, with less load available for shedding at the time of system peak. Models of hourly end-use consumption were constructed to simulate the impact of conservation, land management, and fuel switching programs on electricity consumption. Javelin, a time-series simulating package for personal computers, was chosen for the hourly analysis. Both a base case and a program case were simulated. 15 figs., 7 tabs.

  16. Lepreau 2 environmental impact statement. Supplemental information

    International Nuclear Information System (INIS)

    1984-09-01

    This report contains supplemental information to the Environmental Impact Statement that was issued on the proposed second nuclear generating station Point Lepreau-2 in New Brunswick, Canada. Some issues dealt with here are the terrestrial and aquatic impacts of radioactive and thermal releases to the environment, radiation safety for the human population, socio-economic impacts on the region in regards to housing, social services and employment, and monitoring programs for all aspects of the development, construction and operation of the plant

  17. Environmental impact of electricity deregulation

    International Nuclear Information System (INIS)

    Swisher, Joel N.; McAlpin, Maria C.

    2006-01-01

    Restructuring of electric utilities affects environmental quality primarily through its effect on airborne emissions. We examine emissions from 1993 to 2002 and discuss possible explanatory factors. Annual NOx and SO 2 emissions fell nationally, mostly due to decreases in emission limits driven by state and Federal regulations. CO 2 emissions have increased almost proportionately with increased generation. Generation increased more than it would have, partly due to energy efficiency spending reductions that accompanied deregulation. The fuel mix shifted slightly from coal to gas, offsetting some CO 2 emissions increases and contributing to SO 2 and NOx emissions decreases. While the percentage share of generation from renewable sources remained at about 2%, recent and expected future increases in wind generating capacity promise future emissions reductions. Although deregulation lacks clear environmental advantages, the deregulation process creates an opportunity for implementation of state policies to reduce emissions. Regulated and deregulated states with renewable portfolio standards (RPS) have a higher average percent of generation from renewable sources. Average energy efficiency savings are higher in regulated states, but slightly higher in deregulated states with a system benefits charge (SBC) than in regulated states without a SBC

  18. Environmental impact of hydropower systems

    International Nuclear Information System (INIS)

    Malai, Marius

    1996-01-01

    The installed hydropower potential of Romania is evaluated to 15,700 MW and 42 billion MWh/year power generation. Only 39% of this potential are currently being utilized. In this note, the impact of Somes-Tarnita and Mariselu-Cluj hydropower systems on the environment is presented. Also, the socio-economic effects on the local communities are considered. These two hydropower systems supply a total electric power of 470 GWh/year

  19. 23 CFR 771.125 - Final environmental impact statements.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Final environmental impact statements. 771.125 Section... ENVIRONMENT ENVIRONMENTAL IMPACT AND RELATED PROCEDURES § 771.125 Final environmental impact statements. (a)(1..., economic, or environmental impacts of the action may need to be more fully explored; (iii) the impacts of...

  20. Environmental impact of population growth

    Science.gov (United States)

    Naylor, Rosamond; Matson, Pamela

    Earth's population currently numbers 5.4 billion; even given optimistic assumptions for reduction in growth rates, the number will double by the middle of the next century with most of the increase in the developing countries. Rapid population growth in the developing world raises the fundamental dilemma of how to alleviate chronic hunger and poverty in the short run while preserving the atmosphere and ecosystem services required for long-term human and biospheric sustenance. This dilemma, and the compromises required to solve it, were discussed by twenty-five researchers from five countries at the Aspen Global Change Institute 1992 Summer Science Session III, Food, Conservation, and Global Environmental Change: Is Compromise Possible?, held from August 16 to 28, in Aspen, Colo.

  1. Environmental impact of household activity in Spain

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez-Choliz, Julio; Duarte, Rosa; Mainar, Alfredo [Department of Economic Analysis University of Zaragoza Gran Via 2, 50005, Zaragoza (Spain)

    2007-04-20

    The objective of this paper is to analyse the environmental impacts of the Spanish economy by way of water and atmospheric pollution on the basis of a Spanish Accounting Matrix for 1999. Only households were taken as an exogenous account. The pollution measures are estimated for seven categories of pollution: three atmospheric pollutants (CO{sub 2}, NO{sub x} and SO{sub x}) and four indicators for water (waste water, nitrogen, metals and biological oxygen demand (BOD)). The environmental data base was obtained from the Spanish Statistical Institute. The analysis reveals that pollution in Spain is closely linked to food production, energy, extractive industries and paper manufacturing. We show that services, taken as a whole, are major polluters, though this is due to the volume of household expenditure they represent rather than their pollution potential as such. We also show that the Spanish economy avoids a great deal of pollution by importing inputs, which pollute where they are produced. Finally, the study also provides per capita pollution values for the aforementioned seven pollutants. (author)

  2. The impact of environmental pollution on public health expenditure: dynamic panel analysis based on Chinese provincial data.

    Science.gov (United States)

    Hao, Yu; Liu, Shuang; Lu, Zhi-Nan; Huang, Junbing; Zhao, Mingyuan

    2018-05-01

    In recent years, along with rapid economic growth, China's environmental problems have become increasingly prominent. At the same time, the level of China's pollution has been growing rapidly, which has caused huge damages to the residents' health. In this regard, the public health expenditure ballooned as the environmental quality deteriorated in China. In this study, the effect of environmental pollution on residents' health expenditure is empirically investigated by employing the first-order difference generalized method of moments (GMM) method to control for potential endogeneity. Using a panel data of Chinese provinces for the period of 1998-2015, this study found that the environmental pollution (represented by SO 2 and soot emissions) would indeed lead to the increase in the medical expenses of Chinese residents. At the current stage of economic development, an increase in SO 2 and soot emissions per capita would push up the public health expenditure per capita significantly. The estimation results are quite robust for different types of regression specifications and different combinations of control variables. Some social and economic variables such as public services and education may also have remarkable influences on residential medical expenses through different channels.

  3. Energy generation x environmental impact

    International Nuclear Information System (INIS)

    Oliveira, Thalles Rodrigues

    2011-01-01

    This work aims: to analyze the various sources of energy giving a general idea of the good and bad points for each power generation model, and its impact in the environment, with the purpose of considering the best available options; research on alternative sources of energy production as well as Brazil's resources in a particular source of energy and point out their strengths and weaknesses; report the best options to take advantage of the available resources for energy production in Triangulo Mineiro, a region within Minas Gerais state

  4. Environmental impact of ongoing operation

    International Nuclear Information System (INIS)

    Henry, L.C.

    1980-07-01

    Present technology in the management of uranium mine and mill wastes, coupled with appropriate site selection, quality construction and good operating procedures, can ensure that impacts on health, safety and the environment will be acceptably low over the period of operation. The methods of chemical and physical stabilization of the tailings and retention structures are also compatible with close-out procedures and will ensure that any releases to the environment will continue to be within the requirements, assuming the continued availability of surveillance

  5. Integrated analysis of two biomarkers in Sciades herzbergii (Ariidae, Siluriformes, to assess the environmental impact at São Marcos' Bay, Maranhão, Brazil

    Directory of Open Access Journals (Sweden)

    Débora Batista Pinheiro-Sousa

    2013-04-01

    Full Text Available Guribu catfish (Sciades herzbergii is a resident species in estuaries of Maranhão, Brazil. The aim of this work was to determine the feasibility of integrated analysis of the branchial lesions and gonadosomatic index of Sciades herzbergii in order to evaluate the effects of pollutants in São Marcos' Bay. The first site (S1 is located near the Ilha dos Caranguejos and was used as a reference area for being an environmental protection area. The second site (S2 is located near the ALUMAR/ALCOA port, and was used as a potentially polluted area. Fish were collected at each site, forty-eight in S1 and forty in S2. Gills were fixed in 10% formalin, and usual histological techniques were used in the first right gill arch, with inclusion in paraffin and sections of 5 µm thickness. There were no histopathological changes in animals captured at the reference site. However, in those catfish collected in the potentially contaminated area it was observed several branchial lesions, such as lifting of the lamellar epithelium, fusion of some secondary lamellae, hypertrophy of epithelial cells and lamellar aneurysm. The analysis using the gonadosomatic index (GSI showed significant differences, being higher in fish analyzed from the reference area (P < 0.05. The branchial lesions and GSI were sensitive for monitoring environmental impacts of different locations at São Marcos' Bay, Maranhão, Brazil.

  6. Environmental impacts of renewable energy sources

    International Nuclear Information System (INIS)

    Abbasi, S.A.; Abbasi, N.

    1997-01-01

    The global attention has always been focused on the adverse environmental impacts of conventional energy sources. In contrast nonconventional energy sources, particularly the renewable ones, have enjoyed a clean image vis a vis environmental impacts. The only major exception to this general trend has been large hydropower projects; experience has taught that they can be disastrous for the environment. The belief now is that mini hydro and microhydro projects are harmless alternatives. But are renewable energy sources really as benign as is widely believed? The present essay addresses this question in the background of Lovin's classical paradigm which had postulated the hard (malignant) and soft (benign) energy concepts in the first place. It then critically evaluates the environmental impacts of major renewable energy sources. It then comes up with the broad conclusion that renewable energy sources are not the panacea they are popularly perceived to be; indeed in some cases their adverse environmental impacts can be as strongly negative as the impacts of conventional energy sources. The paper also dwells on the steps needed to utilize renewable energy sources without facing environmental backlashes of the type experienced from hydropower projects

  7. 78 FR 50022 - Environmental Impact Statement; Asian Longhorned Beetle Eradication Program

    Science.gov (United States)

    2013-08-16

    ... submit comments regarding the environmental impact statement by either of the following methods: Federal..., Environmental Protection Specialist, Environmental and Risk Analysis Services, PPD, APHIS, 4700 River Road Unit...] Environmental Impact Statement; Asian Longhorned Beetle Eradication Program AGENCY: Animal and Plant Health...

  8. Environmental Impact Assessment of Wind Generators in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Vladimír Lapčík

    2008-11-01

    Full Text Available The article summarizes author´s experience with environmental impact assessment in branch of wind generators. The introductorypart of paper describes legislative obligations of the Czech Republic in frame of fulfilling the European Union´s limits in branch ofrenewable energy resources utilization. Next part of paper deals with analysis of impacts of wind generators on the environment.The final part of paper deals with experience with implementation of the environmental impact assessment process (pursuant to the ActNo. 100/2001 Coll. in the field of wind power in the Czech Republic.

  9. Environmental impact assessment in practice: A gender critique

    International Nuclear Information System (INIS)

    Kurian, P.A.; Purdue Univ., West Lafayette, IN

    1995-01-01

    The author evaluates the extent to which environmental impact assessment (EIA) as conceptualized by EIA systems is a gendered process. Through a discourse analysis of in-depth interviews with bureaucrats, technocrats, and activists involved with the Sardar Sarovar dam project in India, the author examines the practice of EIA in a Third World country. She uses a theoretical framework, informed by a theory of gender, to evaluate the interviews. In practice, EIA is marked by gender biases that ignore the gender-specific nature of impacts. Such biases distort the impact assessment process, making environmental sustainability difficult, if not impossible, to achieve

  10. Environmental impact statements: new legal technique for environmental protection

    Energy Technology Data Exchange (ETDEWEB)

    Baldwin, M F

    1975-02-01

    The National Environmental Policy Act (NEPA) has required Federal agencies to re-examine all their programs affecting the environment, to consider alternative policies, to coordinate their actions with other agencies, and to disclose their environmental analyses to the public. In short, it has attempted to change decision processes markedly, in order to respond to wide-spread public concern about a deteriorating natural and human environment. The mandates of the policy are listed, but knowing that these were not sufficient to change existing agency practices, Congress established what has been called an ''action-forcing mechanism.'' Each federal agency must ''include in every recommendation or report on proposals for legislation and other major federal actions significantly affecting the quality of the human environment, a detailed statement by the responsible official.'' This statement must cover the following five points as specified in Section 102(2)(c): the environmental impact of the proposed action; any adverse environmental effects which cannot be avoided should the proposal be implemented; alternatives to the proposed action; the relationship between local and short-term uses of man's environment and the maintenance and enhancement of long-term productivity, and any irreversible and irretrievable commitments of resources which would be involved in the proposed action should it be implemented. Section 102 has been considered the heart of the National Environmental Policy Act. The specific five-point environmental report--known as an environmental impact statement--is the visible evidence of an agency's compliance with the environmental policy articulated by Congress. (MCW)

  11. SHORT COMMUNICATION IMPACT OF ENVIRONMENTAL ...

    African Journals Online (AJOL)

    Preferred Customer

    This study evaluated the levels of cadmium, lead, copper and zinc in the ... analysis showed significant correlation (p < 0.01) between the metal levels in .... Atomic Absorption Spectrophotometer (UNICAM, UK) using air-acetylene flame. .... exceeded the 20 mg/kg recommended by Food Stuff, Cosmetics and Disinfectant Act.

  12. Economic analysis of the expected environmental impact of the Single European Market through the transport, waste and energy sectors

    International Nuclear Information System (INIS)

    Brutscher, S.

    1993-01-01

    Similarly to other studies the present dissertation presupposes that the Single European Market will lead to an increase in transport waste quantities, and energy consumption and consequently to greater environmental pollution. Of central importance here is the concept of ''expletive costs'' introduced in this paper which describes that damage to the natural and human environment which is not compensated. It forms out that the sectors of transport, waste, and energy alone will most probably send the expletive costs of the Single European Market into astronomic dimensions. In view of the interdependencies of these three sectors it seems doubtful whether the economic benefit to be expected from the establishment of the Single European Market can justify the additional environmental damage thus caused. (HP) [de

  13. Assessment of Environmental and Economic Impacts of Vine-Growing Combining Life Cycle Assessment, Life Cycle Costing and Multicriterial Analysis

    Directory of Open Access Journals (Sweden)

    Giacomo Falcone

    2016-08-01

    Full Text Available The wine sector is going through a significant evolution dealing with the challenges of competition issues in international markets and with necessary commitments to sustainability improvement. In the wine supply chain, the agricultural phase represents a potential source of pollution and costs. From the farmers’ point of view, these contexts require them to be more attentive and find a compromise among environmental benefits, economic benefits, and costs linked to farming practices. This paper aims to make a sustainability assessment of different wine-growing scenarios located in Calabria (Southern Italy that combines conflicting insights, i.e., environmental and economic ones, by applying Life Cycle Assessment (LCA and Life Cycle Costing (LCC to identify the main hotspots and select the alternative scenarios closest to the ideal solution through the VIKOR multicriteria method. In particular, the latter allowed us to obtain synthetic indices for a two-dimensional sustainability assessment. Conventional practices associated to the espalier training system represent the best compromise from both environmental and economic points of view, due to the higher yield per hectare. The choices regarding Functional Unit (FU and indicators were shown to have a high influence on results.

  14. 76 FR 57720 - Notice of Intent To Prepare an Environmental Impact Statement/Overseas Environmental Impact...

    Science.gov (United States)

    2011-09-16

    ...The Department of the Navy published a document in the Federal Register (76 FR 174) on September 8, 2011, concerning public scoping meetings to support the development of an Environmental Impact Statement/Overseas Environmental Impact Statement for the Mariana Islands Training and Testing Study Area. The document contained an incorrect scoping date.

  15. Integrated manure management to reduce environmental impact: II. Environmental impact assessment of strategies

    NARCIS (Netherlands)

    Vries, de J.W.; Groenestein, C.M.; Schroder, J.J.; Hoogmoed, W.B.; Sukkel, W.; Groot Koerkamp, P.W.G.; Boer, de I.J.M.

    2015-01-01

    Manure management contributes to adverse environmental impacts through losses of nitrogen (N), phosphorus, and carbon (C). In this study, we aimed to assess the potential of newly designed strategies for integrated manure management (IS) to reduce environmental impact. An important aspect of the

  16. 76 FR 55703 - Draft Environmental Impact Statement/Environmental Impact Report and Notice of Public Meetings...

    Science.gov (United States)

    2011-09-08

    ..., and physical and cyber security systems. The new JOC also must meet State essential service criteria... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Draft Environmental Impact Statement/Environmental Impact Report and Notice of Public Meetings for the Joint Operations Center Relocation Project...

  17. The value of environmental impact assessments

    International Nuclear Information System (INIS)

    Sohocki, D.D.

    1996-01-01

    The environment and the economy are inextricably linked. Today the environmental, economic, and social associated with project and program decisions are at times of such a magnitude and duration that they exceed our ability to understand, let alone mitigate them. Energy production, distribution, pricing, policies, end uses, and externalities demonstrate the need for wise planning and informed decision making. International cooperation, based upon mutually shared respect, responsibility, and innovative solutions is an essential component of addressing contemporary issues, impacts, and opportunities. Both egypt and the united states have laws requiring environmental impact assessments. Just as egypt can learn from our successes and failures in the environmental impact assessment field over the past 36 years, the united states and other nations can learn as egypt develops and innovates its own approaches and solutions

  18. Environmental conditions analysis program

    International Nuclear Information System (INIS)

    Holten, J.

    1991-01-01

    The PC-based program discussed in this paper has the capability of determining the steady state temperatures of environmental zones (rooms). A program overview will be provided along with examples of formula use. Required input and output from the program will also be discussed. Specific application of plant monitored temperatures and utilization of this program will be offered. The presentation will show how the program can project individual room temperature profiles without continual temperature monitoring of equipment. A discussion will also be provided for the application of the program generated data. Evaluations of anticipated or planned plant modifications and the use of the subject program will also be covered

  19. Nuclear energy: biological effects and environmental impact

    International Nuclear Information System (INIS)

    Boonefaes, M.

    1987-01-01

    This thesis is concerned with the large development of nuclear power plants and the recent nuclear catastrophe which has made clear how the hazards resulting from radioactivity affect public health and the environment. Environmental effects of nuclear power plants operating in normal conditions are small, but to obtain nuclear power plants of reduced radioactivity, optimization of their design, construction, operation and waste processing plays a decisive role. Biological effects of ionizing radiations and environmental impacts of Nuclear Power plants are developed [fr

  20. Environmental Impact of ICT on the Transport Sector

    DEFF Research Database (Denmark)

    Falch, Morten

    2012-01-01

    This section analyses the environmental impact of ICT. This is done through an analysis on how two specific applications (tele-work and teleshopping) affect transport behavior. These two applications are considered to have a large potential with regard to savings in energy consumption.......This section analyses the environmental impact of ICT. This is done through an analysis on how two specific applications (tele-work and teleshopping) affect transport behavior. These two applications are considered to have a large potential with regard to savings in energy consumption....

  1. 77 FR 14416 - Notice of Availability of a Final Environmental Impact Statement and Final Environmental Impact...

    Science.gov (United States)

    2012-03-09

    ...In accordance with the National Environmental Policy Act of 1969, as amended (NEPA), and the Federal Land Policy and Management Act of 1976, as amended (FLPMA), the Bureau of Land Management (BLM) has prepared a Proposed California Desert Conservation Area (CDCA) Plan Amendment (PA)/Final Environmental Impact Statement (EIS) and Final Environmental Impact Report (EIR) for the Ocotillo Express Wind Energy Facility (OWEF) and by this notice is announcing the availability of the Proposed PA and Final EIS/EIR.

  2. Evaluating the environmental impacts of dietary recommendations.

    Science.gov (United States)

    Behrens, Paul; Kiefte-de Jong, Jessica C; Bosker, Thijs; Rodrigues, João F D; de Koning, Arjan; Tukker, Arnold

    2017-12-19

    Dietary choices drive both health and environmental outcomes. Information on diets come from many sources, with nationally recommended diets (NRDs) by governmental or similar advisory bodies the most authoritative. Little or no attention is placed on the environmental impacts within NRDs. Here we quantify the impact of nation-specific NRDs, compared with an average diet in 37 nations, representing 64% of global population. We focus on greenhouse gases (GHGs), eutrophication, and land use because these have impacts reaching or exceeding planetary boundaries. We show that compared with average diets, NRDs in high-income nations are associated with reductions in GHG, eutrophication, and land use from 13.0 to 24.8%, 9.8 to 21.3%, and 5.7 to 17.6%, respectively. In upper-middle-income nations, NRDs are associated with slight decrease in impacts of 0.8-12.2%, 7.7-19.4%, and 7.2-18.6%. In poorer middle-income nations, impacts increase by 12.4-17.0%, 24.5-31.9%, and 8.8-14.8%. The reduced environmental impact in high-income countries is driven by reductions in calories (∼54% of effect) and a change in composition (∼46%). The increased environmental impacts of NRDs in low- and middle-income nations are associated with increased intake in animal products. Uniform adoption of NRDs across these nations would result in reductions of 0.19-0.53 Gt CO 2 eq⋅a -1 , 4.32-10.6 Gt [Formula: see text] eq⋅a -1 , and 1.5-2.8 million km 2 , while providing the health cobenefits of adopting an NRD. As a small number of dietary guidelines are beginning to incorporate more general environmental concerns, we anticipate that this work will provide a standardized baseline for future work to optimize recommended diets further. Copyright © 2017 the Author(s). Published by PNAS.

  3. Environmental impacts and cost estimation for electricity production

    International Nuclear Information System (INIS)

    Devezeaux de Lavergne, J.G.

    2000-01-01

    This article reviews the different sources of energy used for electricity production in the view of the impact on environment. Coal, gas, wind energy, nuclear energy and hydro-energy are considered. The comparison of environmental performances requires common methodologies, 2 methodologies have been used ACV (analysis of a complete life cycle) and IPM (impact pathway methodology), both study all the exchanges of a system with the outside. The environmental performance is quantified by a series of parameters which represent the degradation of ecosystems. These parameters are divided into 4 groups: i) impact on public health, ii) impact on staff health, iii) impact on regional environment (agriculture, landscape alteration...) and iv) global impact on environment (greenhouse effect, acid rain, waste production, reduction of resources...). (A.C.)

  4. 47 CFR 1.1314 - Environmental impact statements (EISs).

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Environmental impact statements (EISs). 1.1314... Procedures Implementing the National Environmental Policy Act of 1969 § 1.1314 Environmental impact statements (EISs). (a) Draft Environmental Impact Statements (DEISs) (§ 1.1315) and Final Environmental...

  5. Environmental impact analysis of the hydroelectric power development sheme in the River Grunnaai in Seljord municipality, Telemark

    International Nuclear Information System (INIS)

    Muniz, I.P.; Bendiksen, E.; Erikstad, L.; Reitan, O.

    1997-01-01

    This report discusses the possible environmental consequences of a planned hydroelectric power development of the river Grunnaai, Norway. The consequences are found to be small, provided the proper counter measures are taken. Without counter measures, there may be moderate consequences on fish populations and botanical conditions, directly dependent on the changed water flow. The greatest value of the area concerned lies in its unspoiled wilderness character. There are extensive lists of birds and mammals and plant species registered in the river valley. 51 refs., 7 figs., 4 tabs

  6. Environmental impact assessment of nuclear desalination

    International Nuclear Information System (INIS)

    2010-03-01

    Nuclear desalination is gaining interest among the IAEA Member States, as indicated by the planned projects, and it is expected that the number of nuclear desalination plants will increase in the near future. The IAEA has already provided its Member States with reports and documents that disseminate information regarding the technical and economic feasibility of nuclear desalination. With the rising environmental awareness, in the scope of IAEA's activities on seawater desalination using nuclear power, a need was identified for a report that would provide a generic assessment of the environmental issues in nuclear desalination. In order to offer an overview of specific environmental impacts which are to be expected, their probable magnitude, and recommended mitigation measures, this publication encompasses information provided by the IAEA Member States as well as other specialized sources. It is intended for decision makers and experts dealing with environmental, desalination and water management issues, offering insight into the environmental aspects that are essential in planning and developing nuclear desalination

  7. Environmental impact of uranium mining and milling

    International Nuclear Information System (INIS)

    Dory, A.B.

    1981-08-01

    The author introduces the subject with an overview of the regulatory requirments and philosophy applied to uranium mines and mills. The special attention given to tailings management is highlighted, and a discussion of the basic environmental concerns is concluded with an itemizing of the main tasks facing the AECB. The extent of the environmental impact of uranium mining, milling and waste management is illustrated with specific details pertaining to mines in the Elliot Lake area. The author concludes that the impact on the ground and surface water system is not alarming, and the impact on air quality is not significant beyond a few hundred metres from the mining facilities. The publicly perceived impact is discussed, followed by a rationale for the continued licensing of new uranium mining operations complete with tailings management facilities

  8. 10 CFR 960.3-4 - Environmental impacts.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Environmental impacts. 960.3-4 Section 960.3-4 Energy... REPOSITORY Implementation Guidelines § 960.3-4 Environmental impacts. Environmental impacts shall be... process. The DOE shall mitigate significant adverse environmental impacts, to the extent practicable...

  9. 22 CFR 216.7 - Environmental impact statements.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Environmental impact statements. 216.7 Section... Environmental impact statements. (a) Applicability. An Environmental Impact Statement shall be prepared when... Environmental Impact Statement relating to paragraph (a)(2) of this section shall comply with the CEQ...

  10. A comparative analysis of the environmental impacts of a Pelamis Wave Energy device with existing off shore developments and installations.

    OpenAIRE

    Quinn, Eoghan

    2011-01-01

    Scotland is currently at the forefront of development and expansion of wave energy, especially with recent renewable energy targets. Research and development has increased greatly off the Scottish coastline. Various adjectives can be used to describe wave energy’s creative potential in helping to achieve Scotland’s energy goals. Put simply however the production of wave energy appears to have all the ingredients for success; it is benign, the visual impacts minimal and its energy is reliable,...

  11. Understanding sustainable diets: a descriptive analysis of the determinants and processes that influence diets and their impact on health, food security, and environmental sustainability.

    Science.gov (United States)

    Johnston, Jessica L; Fanzo, Jessica C; Cogill, Bruce

    2014-07-01

    The confluence of population, economic development, and environmental pressures resulting from increased globalization and industrialization reveal an increasingly resource-constrained world in which predictions point to the need to do more with less and in a "better" way. The concept of sustainable diets presents an opportunity to successfully advance commitments to sustainable development and the elimination of poverty, food and nutrition insecurity, and poor health outcomes. This study examines the determinants of sustainable diets, offers a descriptive analysis of these areas, and presents a causal model and framework from which to build. The major determinants of sustainable diets fall into 5 categories: 1) agriculture, 2) health, 3) sociocultural, 4) environmental, and 5) socioeconomic. When factors or processes are changed in 1 determinant category, such changes affect other determinant categories and, in turn, the level of "sustainability" of a diet. The complex web of determinants of sustainable diets makes it challenging for policymakers to understand the benefits and considerations for promoting, processing, and consuming such diets. To advance this work, better measurements and indicators must be developed to assess the impact of the various determinants on the sustainability of a diet and the tradeoffs associated with any recommendations aimed at increasing the sustainability of our food system. © 2014 American Society for Nutrition.

  12. Understanding Sustainable Diets: A Descriptive Analysis of the Determinants and Processes That Influence Diets and Their Impact on Health, Food Security, and Environmental Sustainability123

    Science.gov (United States)

    Johnston, Jessica L.; Fanzo, Jessica C.; Cogill, Bruce

    2014-01-01

    The confluence of population, economic development, and environmental pressures resulting from increased globalization and industrialization reveal an increasingly resource-constrained world in which predictions point to the need to do more with less and in a “better” way. The concept of sustainable diets presents an opportunity to successfully advance commitments to sustainable development and the elimination of poverty, food and nutrition insecurity, and poor health outcomes. This study examines the determinants of sustainable diets, offers a descriptive analysis of these areas, and presents a causal model and framework from which to build. The major determinants of sustainable diets fall into 5 categories: 1) agriculture, 2) health, 3) sociocultural, 4) environmental, and 5) socioeconomic. When factors or processes are changed in 1 determinant category, such changes affect other determinant categories and, in turn, the level of “sustainability” of a diet. The complex web of determinants of sustainable diets makes it challenging for policymakers to understand the benefits and considerations for promoting, processing, and consuming such diets. To advance this work, better measurements and indicators must be developed to assess the impact of the various determinants on the sustainability of a diet and the tradeoffs associated with any recommendations aimed at increasing the sustainability of our food system. PMID:25022991

  13. 75 FR 25309 - Environmental Impact Statement: Cook County, IL

    Science.gov (United States)

    2010-05-07

    ... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Environmental Impact Statement: Cook... FHWA is issuing this Notice to advise the public that an Environmental Impact Statement (EIS) will be... project comprises several elements of the overall Chicago Region Environmental and Transportation...

  14. Risk and environmental impact assessment: nuclear and environmental licensing interface

    International Nuclear Information System (INIS)

    Costa, Eduardo M.; Monteiro, Iara A.

    1997-01-01

    The main aims of this paper are the identification and discussion of interfaces and application of common concepts in the existing nuclear and environmental licensing procedures. Risk and impact assessment of nuclear electricity generation are two of these concepts which are discussed detail. The risk concept, which had initially focused on engineering projects, has been extended to many other areas of human activity. Risk resulting from the use of ionization radiation has been associated to the dose for the critical members of the public. Therefore, radiation protection applies basic dose limits which are established in national and international recommendations. These recommendations are increasing the emphasis to keep all the exposures to ionizing radiation as low as reasonable achievable, economical and social factors being taken into account. On the other hand, environmental impact assessment has been used as a tool in planning and decision-making processes, thus including environmental concern in the discussion of social and economical development strategies. This paper aims to discuss the association of these two concepts by presenting the procedures of control of radiological impact during normal operation of a nuclear power plant and the various forms of risk communication to the public in the case of events occurrence. (author). 13 refs

  15. Environmental and social impacts of wind energy

    DEFF Research Database (Denmark)

    Borch, Kristian; Clausen, Niels-Erik; Ellis, Geraint

    2014-01-01

    The most common reasons for non- technical delays to wind energy projects are local resistance and poor strategic spatial planning. This chapter looks at the environmental and social impacts of wind energy and discusses how the public can gain trust in the public planning and private project...

  16. Anaesthetic gases: environmental impact and alternatives ...

    African Journals Online (AJOL)

    Anaesthetic gases: environmental impact and alternatives. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... to be small when compared to gaseous emissions from industrial and agricultural sources, the actual percentage contribution to climate change is small. ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  17. Epigenetics and environmental impacts in cattle

    Science.gov (United States)

    This chapter reviews the major advances in the field of epigenetics as well as the environmental impacts of cattle. Many findings from our own research endeavors related to the topic of this chapter are also introduced. The phenotypic characterization of an animal can be changed through epigenetic ...

  18. Technical support document: Energy efficiency standards for consumer products: Refrigerators, refrigerator-freezers, and freezers including draft environmental assessment, regulatory impact analysis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The Energy Policy and Conservation Act (P.L. 94-163), as amended by the National Appliance Energy Conservation Act of 1987 (P.L. 100-12) and by the National Appliance Energy Conservation Amendments of 1988 (P.L. 100-357), and by the Energy Policy Act of 1992 (P.L. 102-486), provides energy conservation standards for 12 of the 13 types of consumer products` covered by the Act, and authorizes the Secretary of Energy to prescribe amended or new energy standards for each type (or class) of covered product. The assessment of the proposed standards for refrigerators, refrigerator-freezers, and freezers presented in this document is designed to evaluate their economic impacts according to the criteria in the Act. It includes an engineering analysis of the cost and performance of design options to improve the efficiency of the products; forecasts of the number and average efficiency of products sold, the amount of energy the products will consume, and their prices and operating expenses; a determination of change in investment, revenues, and costs to manufacturers of the products; a calculation of the costs and benefits to consumers, electric utilities, and the nation as a whole; and an assessment of the environmental impacts of the proposed standards.

  19. Analysis of Environmental Impact for Concrete Using LCA by Varying the Recycling Components, the Compressive Strength and the Admixture Material Mixing

    Directory of Open Access Journals (Sweden)

    Taehyoung Kim

    2016-04-01

    Full Text Available Concrete is a type of construction material in which cement, aggregate, and admixture materials are mixed. When cement is produced, large amounts of substances that impact the environment are emitted during limestone extraction and clinker manufacturing. Additionally, the extraction of natural aggregate causes soil erosion and ecosystem destruction. Furthermore, in the process of transporting raw materials such as cement and aggregate to a concrete production company, and producing concrete in a batch plant, substances with an environmental impact are emitted into the air and water system due to energy use. Considering the fact that the process of producing concrete causes various environmental impacts, an assessment of various environmental impact categories is needed. This study used a life cycle assessment (LCA to evaluate the environmental impacts of concrete in terms of its global warming potential, acidification potential, eutrophication potential, ozone depletion potential, photochemical ozone creation potential, and abiotic depletion potential (GWP, AP, EP, ODP, POCP, ADP. The tendency was that the higher the strength of concrete, the higher the GWP, POCP, and ADP indices became, whereas the AP and EP indices became slightly lower. As the admixture mixing ratio of concrete increased, the GWP, AP, ODP, ADP, and POCP decreased, but EP index showed a tendency to increase slightly. Moreover, as the recycled aggregate mixing ratio of concrete increased, the AP, EP, ODP, and ADP decreased, while GWP and POCP increased. The GWP and POCP per unit compressed strength (1 MPa of high strength concrete were found to be about 13% lower than that for its normal strength concrete counterpart. Furthermore, in the case of AP, EP, ODP, and ADP per unit compressed strength (1 MPa, high-strength concrete was found to be about 10%~25% lower than its normal strength counterpart. Among all the environmental impact categories, ordinary cement was found to have

  20. Graphical Methodology of Global Pollution Index for the Environmental Impact Assessment Using Two Environmental Components

    Directory of Open Access Journals (Sweden)

    Corneliu Cojocaru

    2017-04-01

    Full Text Available One of the applied methods for environmental impact assessment is the index of global pollution (IGP proposed by Rojanschi in 1991. This methodology enables the global estimation for the ecosystem state affected more or less by human activities. Unfortunately, Rojanschi’s method has a limitation; it can be applied only if at least three environmental components are considered. Frequently, many environmental impact assessment applications rely on analysis of only two environmental components. Therefore, this work aimed to develop a new graphical method to extend Rojanschi’s approach for the case of two environmental components. The proposed method avoids the average value of evaluation grades and uses only the graphical correspondence for calculation of the index of global pollution. A right-angle triangle graph methodology was proposed, where bases represented the values of evaluation grades. Thus, for the case of two environmental components, the index of global pollution was calculated as the relation between the ideal and real ecosystem states represented by the ratio between areas of external and enclosed right triangles. The developed graphical method was tested and validated for real case studies: the environmental impact assessment from a refinery located on the Romanian Black Sea Coast considering Air and Water environmental components and from a coal-fired thermoelectric power plant from Eastern Romania regarding Air and Soil environmental components. In this way, it was provided a reliable and faster tool to be used for the pollution characterization of human-derived chemicals for better decisions in risk management.

  1. 32 CFR Appendix C to Part 989 - Procedures for Holding Public Hearings on Draft Environmental Impact Statements (EIS)

    Science.gov (United States)

    2010-07-01

    ... hiring the court reporter, funds temporary duty costs for the hearing officer, makes logistical...) DEPARTMENT OF THE AIR FORCE ENVIRONMENTAL PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) Pt. 989...

  2. 10 CFR 51.93 - Distribution of final environmental impact statement and supplement to final environmental impact...

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of final environmental impact statement and supplement to final environmental impact statement; news releases. 51.93 Section 51.93 Energy NUCLEAR... Environmental Impact Statements-General Requirements § 51.93 Distribution of final environmental impact...

  3. Beverley project: draft environmental impact statement

    International Nuclear Information System (INIS)

    1982-07-01

    The Beverley deposit is located on the northern Lake Frome Plains, South Australia, 520km north of Adelaide. It is proposed to mine the deposit by in-situ leaching and to process the solution on the surface to produce an estimated 11,600t of yellowcake from about 6 million tonnes of 0.27% ore over approximately 23 years. The draft environmental impact statement is intended to cover all stages of the development from the pilot plant to final rehabilitation. Sections include the existing environment (geology, climate and meteorology, soils, hydrology, ecology, radionuclide base levels, land use, population and sites of Aboriginal and archaeological significance), the proposed development (solution mining, waste management, water management and mining and processing options), rehabilitation, environmental impact and environmental management and monitoring

  4. Analysis of environmental sounds

    Science.gov (United States)

    Lee, Keansub

    Environmental sound archives - casual recordings of people's daily life - are easily collected by MPS players or camcorders with low cost and high reliability, and shared in the web-sites. There are two kinds of user generated recordings we would like to be able to handle in this thesis: Continuous long-duration personal audio and Soundtracks of short consumer video clips. These environmental recordings contain a lot of useful information (semantic concepts) related with activity, location, occasion and content. As a consequence, the environment archives present many new opportunities for the automatic extraction of information that can be used in intelligent browsing systems. This thesis proposes systems for detecting these interesting concepts on a collection of these real-world recordings. The first system is to segment and label personal audio archives - continuous recordings of an individual's everyday experiences - into 'episodes' (relatively consistent acoustic situations lasting a few minutes or more) using the Bayesian Information Criterion and spectral clustering. The second system is for identifying regions of speech or music in the kinds of energetic and highly-variable noise present in this real-world sound. Motivated by psychoacoustic evidence that pitch is crucial in the perception and organization of sound, we develop a noise-robust pitch detection algorithm to locate speech or music-like regions. To avoid false alarms resulting from background noise with strong periodic components (such as air-conditioning), a new scheme is added in order to suppress these noises in the domain of autocorrelogram. In addition, the third system is to automatically detect a large set of interesting semantic concepts; which we chose for being both informative and useful to users, as well as being technically feasible. These 25 concepts are associated with people's activities, locations, occasions, objects, scenes and sounds, and are based on a large collection of

  5. Lepreau 2 environmental impact statement. Summary

    International Nuclear Information System (INIS)

    1984-05-01

    Maritime Nuclear, a joint undertaking of Atomic Energy of Canada Limited and the New Brunswick Electric Power Commission, proposes to construct a second CANDU 600 MW nuclear-powered generating unit at the site of the existing Point Lepreau Generating Station, in New Brunswick. A feasibility study is now underway and guidelines issued by the Lepreau 2 Environmental Assessment Panel identified six priority issues and concerns. These are: impacts on the biological environment, impacts of radiation on humans, impacts on the socio-economic environment, monitoring, emergency planning, and decommissioning. These factors as well as a description of the proposed facility are described in this report

  6. Multivariate analysis of historical data (2004-2013) in assessing the possible environmental impact of the Bellolampo landfill (Palermo).

    Science.gov (United States)

    Indelicato, Serena; Bongiorno, David; Tuzzolino, Nicola; Mannino, Maria Rosaria; Muscarella, Rosalia; Fradella, Pasquale; Gargano, Maria Elena; Nicosia, Salvatore; Ceraulo, Leopoldo

    2018-03-14

    Multivariate analysis was performed on a large data set of groundwater and leachate samples collected during 9 years of operation of the Bellolampo municipal solid waste landfill (located above Palermo, Italy). The aim was to obtain the most likely correlations among the data. The analysis results are presented. Groundwater samples were collected in the period 2004-2013, whereas the leachate analysis refers to the period 2006-2013. For groundwater, statistical data evaluation revealed notable differences among the samples taken from the numerous wells located around the landfill. Characteristic parameters revealed by principal component analysis (PCA) were more deeply investigated, and corresponding thematic maps were drawn. The composition of the leachate was also thoroughly investigated. Several chemical macro-descriptors were calculated, and the results are presented. A comparison of PCA results for the leachate and groundwater data clearly reveals that the groundwater's main components substantially differ from those of the leachate. This outcome strongly suggests excluding leachate permeation through the multiple landfill lining.

  7. Aspects and environmental impacts associated with the production of concrete

    Directory of Open Access Journals (Sweden)

    Aura Navas de García

    2015-12-01

    Full Text Available Concrete plants are important to the economy of a country. However, this industry causes major environmental impacts in each of the steps involved in the manufacturing process of concrete production which are analyzed in this research. In addition, the perception of experts and workers in the area, about the environmental impacts associated with the activity of a producer of concrete was evaluated. The methodology used for the analysis of steps in the production process was as kind documentary. For to evaluate perception of environmental impacts the methodology used was descriptive non experimental, using interviews with workers related to the manufacturing process of the concrete. Among the major identified environmental impacts are dust emissions and improper handling of effluents, hazardous and non-hazardous materials. Among the proposals put forward to address these impacts include: installation of dust collectors, settling tanks, management plans for hazardous and non-hazardous materials, among others. An analysis of the results incorporating the principles of corporate social responsibility for improving or minimizing adverse impacts are detected proposed

  8. 77 FR 68813 - Notice of Availability of the Draft Environmental Impact Statement and Environmental Impact...

    Science.gov (United States)

    2012-11-16

    ...In accordance with the National Environmental Policy Act of 1969, as amended (NEPA); the Federal Land Policy and Management Act of 1976, as amended; and the California Environmental Quality Act of 1970 (CEQA); the Bureau of Land Management (BLM) Bishop Field Office, Bishop, California; the United States Forest Service (USFS) Inyo National Forest; and the Great Basin Unified Air Pollution Control District (GBUAPCD) (a California state agency) have prepared a Draft Environmental Impact Statement (EIS)/Environmental Impact Report (EIR) for the proposed Casa Diablo IV Geothermal Development Project near the Town of Mammoth Lakes in Mono County, California. This notice announces the opening of the public comment period.

  9. Recommendations for the Preparation of Environmental Assessments and Environmental Impact Statements, 2nd edition

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2004-12-01

    This document provides recommendations for the Department of Energy’s (DOE’s) preparation of environmental assessments and environmental impact statements under the National Environmental Policy Act of 1969 (NEPA). The Office of NEPA Policy and Compliance prepared these recommendations in consultation with the Office of the Assistant General Counsel for Environment and following coordination with the DOE NEPA Community. The recommendations should materially aid those responsible for preparing and reviewing NEPA documents to focus on significant environmental issues, adequately analyze environmental impacts, and effectively present the analysis to decisionmakers and the public. The recommendations are not all-encompassing, however; preparers must apply independent judgment to determine the appropriate scope and analytical requirements of NEPA for each proposal. These recommendations do not constitute legal requirements, but are intended to enhance compliance with existing NEPA regulations (40 CFR Parts 1500-1508, 10 CFR Part 1021).

  10. Benchmarking performance: Environmental impact statements in Egypt

    International Nuclear Information System (INIS)

    Badr, El-Sayed A.; Zahran, Ashraf A.; Cashmore, Matthew

    2011-01-01

    Environmental impact assessment (EIA) was formally introduced in Egypt in 1994. This short paper evaluates 'how well' the EIA process is working in practice in Egypt, by reviewing the quality of 45 environmental impact statements (EISs) produced between 2000 and 2007 for a variety of project types. The Lee and Colley review package was used to assess the quality of the selected EISs. About 69% of the EISs sampled were found to be of a satisfactory quality. An assessment of the performance of different elements of the EIA process indicates that descriptive tasks tend to be performed better than scientific tasks. The quality of core elements of EIA (e.g., impact prediction, significance evaluation, scoping and consideration of alternatives) appears to be particularly problematic. Variables that influence the quality of EISs are identified and a number of broad recommendations are made for improving the effectiveness of the EIA system.

  11. Quality of life and biological communities: Analysis of the study of environmental impact of the metro in the city of Quito

    Directory of Open Access Journals (Sweden)

    Cristina Aguilar

    2013-10-01

    Full Text Available This work shows a critique review of the Informe de Impacto Ambiental del Metro de Quito (Report of environmental impact of subway of Quito, in its variables: quality of life and biological communities. From an ecosistemic perspective of comprehension and understanding of the city, we see that the report holds a reductionist vision of the environmental dimension. Assuming that the subway constitutes an improvement in urban mobility, we argue that this project is an opportunity to generate instances of promotion and articulation of biodiversity within the city. We discuss the necessity of counteracting the dependency of the environmental approach of production and reproduction of the city.

  12. Environmental impact statement requirements for CNEA

    International Nuclear Information System (INIS)

    Ciurciolo, Melisa N.; Mender, J. A.

    2009-01-01

    The purpose of this paper is to describe the legal framework on Environmental Impact Assessment (EIA) regarding the activities of the National Atomic Energy Commission (Comision Nacional de Energia Atomica, CNEA), and particularly, the Procedure for Internal Management of Environmental Impact Statements of CNEA (PN-PR-027). According to the distribution of powers stated in article 41 of the National Constitution, the environmental legal framework is constituted by National minimum standards for environmental protection and complementary provincial and municipal regulations. As a result, the EIA legal framework is not uniform across the Nation, and therefore, it differs according to the jurisdiction in which the activity subject to EIA is developed. Notwithstanding, the General Statute of the Environment (25.675) requires EIA for any project or activity developed in the National territory, which may cause a significant degradation to the environment, any of its components, or affect the populations' quality of life in a significant way. Since CNEA develops activities along the National territory, it is not possible to determine a uniform legal EIA framework for the entire Institution. Consequently, the binding requirements for Environmental Impact Statements (EISs) of CNEA activities differ among the activities developed in the different locations and atomic centers. In order to achieve a uniform environmental performance in CNEA, it has been considered necessary to uniform, in the internal sphere, the binding requirements for EIS, by means of a procedure written within the framework of the Environmental Management System of the Institution. The purpose of the Procedure for Internal Management of Environmental Impact Statements is to determine the requirements to be complied by the atomic centers, locations and enterprises associated with CNEA, regarding EIS Management. This Procedure shall apply to those projects and activities subjected to EIA, according to a

  13. Some issues on environmental impact report of radioactive material transport

    International Nuclear Information System (INIS)

    Wang Jiaming

    2001-01-01

    The author puts forward some issues which should be paid attention to when compiling a environmental impact report of radioactive material transport. The main issues discussed are as follows: (1) Optimization analysis for transport routes. (2) Source terms under accident conditions in transport. (3) Precautions against accidents and emergency preparedness. (4) Quality assurance of transport, etc

  14. The environmental impact of fibre crops in industrial applications

    NARCIS (Netherlands)

    Dam, van J.E.G.; Bos, H.L.

    2004-01-01

    A short literature survey is presented on health and environmental issues in relation to the production and use of fibre crops. Next a short introduction to Life Cycle Analysis (LCA) is given and the various commonly applied methods for quantifying ecological impacts are discussed in short. The

  15. Business plan: Supplemental draft environmental impact statement. Volume 2. Appendices

    International Nuclear Information System (INIS)

    1995-02-01

    This document contains the appendices for the Bonneville Power Administration (BPA) Business Plan: Supplemental Draft Environmental Impact Statement. Included are: BPA products and services; Rate design; Methodology and assumptions for numerical analysis; Retail utility operations; Comments and responses to the draft business plan EIS

  16. Business Plan : Supplemental Draft Environmental Impact Statement, Volume 2, Appendices.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1995-02-01

    This document contains the appendices for the Bonneville Power Administration (BPA) Business Plan: Supplemental Draft Environmental Impact Statement. Included are: BPA products and services; Rate design; Methodology and assumptions for numerical analysis; Retail utility operations; Comments and responses to the draft business plan EIS.

  17. The Environmental Impact of Oilfield Formation Water on a ...

    African Journals Online (AJOL)

    A comparative analysis of the physico-chemical parameters of treated oilfield formation water and that of a freshwater stream with no previous history of pollution from oil exploration activities was determined. The environmental impact resulting from the discharge of treated oilfield formation water into freshwater samples ...

  18. Assessment of the effects of the Japanese shift to lead-free solders and its impact on material substitution and environmental emissions by a dynamic material flow analysis

    International Nuclear Information System (INIS)

    Fuse, Masaaki; Tsunemi, Kiyotaka

    2012-01-01

    Lead-free electronics has been extensively studied, whereas their adoption by society and their impact on material substitution and environmental emissions are not well understood. Through a material flow analysis (MFA), this paper explores the life cycle flows for solder-containing metals in Japan, which leads the world in the shift to lead-free solders in electronics. The results indicate that the shift has been progressing rapidly for a decade, and that substitutes for lead in solders, which include silver and copper, are still in the early life cycle stages. The results also show, however, that such substitution slows down during the late life cycle stages owing to long electronic product lifespans. This deceleration of material substitution in the solder life cycle may not only preclude a reduction in lead emissions to air but also accelerate an increase in silver emissions to air and water. As an effective measure against ongoing lead emissions, our scenario analysis suggests an aggressive recycling program for printed circuit boards that utilizes an existing recycling scheme. -- Highlights: ► We model the life cycle flows for solder-containing metals in Japan. ► The Japanese shift to lead-free solders progresses rapidly for a decade. ► Substitution for lead in solders slows down during the late life cycle stages. ► The deceleration of substitution precludes a reduction in lead emissions to air.

  19. The cultural analysis in the environmental impact studies. Jepirachi wind pilot project and connecting road between the Aburra valley and Cauca River

    International Nuclear Information System (INIS)

    Ruiz, Aura Luz; Carmona, Sergio Ivan

    2006-01-01

    This article is synthesis of the investigation to choose I in environment title of Master and Development of the National University of Host Colombia Medellin, on the speech, the social images and representations that emerge in the Studies from environmental Impact -EIA- from the cultural systems from communities affected by the implantation and operation. From two macro projects, that are part of the Plans of national Development, regional and local in Colombia: one, the Project Pilot of Generation of Aeolian Energy Jepirachi, in Colombian the Guajira discharge that affects indigenous communities of several establishments Wayuu in the sector of Average Moon. The other, the project of Road Connection between Valleys of the Aburra River - and the Cauca River, which it affects communities that inhabit an axis of rural transition - urban, whose cultural composition is diverse in its origin, mobility and interactions. It was left from two hypotheses: one, is that the analysis made in the cultural dimension of the EIA, is insufficient lo identify, lo evaluate and to handle the impacts on the cultural systems; second, front lo the treatment of the cultural systems is the existence of fundamental differences. There is cultural systems in Colombia which status is recognized greater and category than to others. The analysis of the speech allowed to obtain a diagnosis on semantic the rhetorical structure and - formal and textual cohesion, coherence, correlations and associations in the EIA and to identify the social images and representations that emerge on the populations taken part by the projects. Finally conclusions. That consider they leave to the debate on the cultural analyses that have been made in the EIA ,their emptiness and limitations and the different courses open that can take futures works from investigation

  20. SITO, Environmental Impact of Major Industrial Activities

    International Nuclear Information System (INIS)

    Mazzini, M.; Oriolo, F.

    1982-01-01

    1 - Description of problem or function: SITO evaluates the impact of major industrial activities on the environment. The method applied accounts for the alterations of ecological, physico-chemical, aesthetical and social values caused by the development of the considered activity. Such values are usually considered as not quantifiable but very important for the quality of the environment. 2 - Method of solution: The territory affected by the industrial project is described in a one-dimensional (for example a coast development) or two-dimensional representation as a lattice of square meshes of equal size. A major feature of the model is that the impact factors are considered with reference to each single mesh. The following vectors and matrices are evaluated: a) Matrix of environmental quality characteristics. It is the product of the environmental quality index matrix and the vector of weighting factors. b) Vector of the initial environmental values. It is the sum of the columns of matrix (a). c) Matrix obtained when the environmental quality characteristics matrix is multiplied by the vector of project action factors, taking into account distance effects. d) Vector of the final environmental values. This is the sum of columns of matrix (c)

  1. Resource Programs: Final Environmental Impact Statement

    International Nuclear Information System (INIS)

    1993-02-01

    Every two years, BA prepares a Resource Program, which identifies the resource actions BA will take to meet its obligation to serve the forecasted power requirements of its customers. The Resource Programs Environmental Impact Statement (RPEIS) is a programmatic environmental document that will support decisions made in several future Resource Programs. Environmental documents tiered to this EIS may be prepared on a site-specific basis. The RPEIS includes a description of the environmental effects and mitigation for the various resource types available in order to evaluate the trade-offs among them. It also assesses the environmental impacts of adding thirteen alternative combinations of resources to the existing power system. The alternatives represent the range of actions BA could take to meet its load obligations. Each of the alternatives allows BA to meet the almost 5,000 average megawatt load increase that could occur with high load growth, or an equivalent need for resources caused by a combination of load growth and any future loss of resources

  2. Transportation impact analysis gets a failing grade when it comes to climate change and smart growth

    Science.gov (United States)

    2008-12-01

    Transportation impact analysis performed to comply with environmental impact laws (i.e., the : California Environmental Quality Act or the National Environmental Policy Act) often focuses : on only one perspective about potential impacts. That perspe...

  3. Environmental and Social Impact Study: Final Report

    International Nuclear Information System (INIS)

    2011-04-01

    The tsetse control project (commonly known as tsetse flies) is an initiative of the Directorate of Livestock (project coordinating institution) and the ISRA (Senegalese Agricultural Research Institute) Accompaniment and diagnosis of the project. It is part of the cooperation between Senegal and the International Atomic Energy Agency (IAEA).The method of control that will be applied is the technique of sterile males.This technique of sterile males, however, is coupled with the use of deltamethrin (D6), a neurotoxic chemical (in adult insects) that is fast and fairly rapidly biodegradable in the environment.This study is carried out with the aim of taking good account of the environmental impacts of the various activities envisaged by the project. Its objective is to assess the biophysical, social and economic impacts of the project and to propose measures to mitigate or compensate for negative impacts and to reinforce positive impacts within the framework of an Environmental Management Plan and (ESMP). It also presents an environmental and social monitoring and monitoring plan to assess the effectiveness of the proposed mitigation measures.

  4. Analyzing the environmental impacts of laptop enclosures ...

    Science.gov (United States)

    The market growth of consumer electronics makes it essential for industries and policy-makers to work together to develop sustainable products. The objective of this study is to better understand how to promote environmentally sustainable consumer electronics by examining the use of various materials in laptop enclosures (excluding mounting hardware, internal components, and insulation) using screening-level life cycle assessment. The baseline material, is a fossil plastic blend of polycarbonate-acrylonitrile butadiene styrene. Alternative materials include polylactic acid, bamboo, aluminum, and various combinations of these materials known to be currently used or being considered for use in laptops. The flame retardants considered in this study are bisphenol A bis(diphenyl phosphate), triphenyl phosphate, 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide, and borax-boric acid-phosphorous acid. The Tool for the Reduction and Assessment of Chemical and other environmental Impacts v2.1 was used for the assessment of impacts related to climate change, human and ecological health, and resource use. The assessment demonstrates that plastics, relative to the other materials, are currently some of the better performing materials in terms of having the lowest potential environmental impact for a greater number of impact categories based on product life cycle models developed in this study. For fossil plastics, the material performance increases with increasing post-con

  5. 40 CFR 6.207 - Environmental impact statements.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Environmental impact statements. 6.207... ACTIONS EPA's NEPA Environmental Review Procedures § 6.207 Environmental impact statements. (a) The Responsible Official will prepare an environmental impact statement (EIS) (see 40 CFR 1508.11) for major...

  6. 76 FR 53453 - Environmental Impacts Statements; Notice of Availability

    Science.gov (United States)

    2011-08-26

    ... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-8998-7] Environmental Impacts Statements; Notice of....epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements. Filed 08/15/2011 through... Lease Sale 193, Revised Information, Analyzing the Environmental Impact of Natural Gas Development and...

  7. 7 CFR 1948.62 - Environmental impact requirements.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 13 2010-01-01 2009-01-01 true Environmental impact requirements. 1948.62 Section... Development Assistance Program § 1948.62 Environmental impact requirements. (a) The policies and regulations... studied for environmental impacts. (c) Boundaries shall define the area within which the environmental...

  8. 40 CFR 1508.11 - Environmental impact statement.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Environmental impact statement. 1508.11 Section 1508.11 Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY TERMINOLOGY AND INDEX § 1508.11 Environmental impact statement. Environmental impact statement means a detailed written...

  9. 28 CFR 91.63 - Preparing an Environmental Impact Statement

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Preparing an Environmental Impact... CORRECTIONAL FACILITIES Environmental Impact Review Procedures for VOI/TIS Grant Program Environmental Review Procedures § 91.63 Preparing an Environmental Impact Statement (a) Initial determination. OJP will determine...

  10. 21 CFR 25.52 - Environmental impact statements.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Environmental impact statements. 25.52 Section 25... ENVIRONMENTAL IMPACT CONSIDERATIONS Public Participation and Notification of Environmental Documents § 25.52 Environmental impact statements. (a) If FDA determines that an EIS is necessary for an action involving...

  11. 7 CFR 1794.61 - Environmental impact statement.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false Environmental impact statement. 1794.61 Section 1794..., DEPARTMENT OF AGRICULTURE (CONTINUED) ENVIRONMENTAL POLICIES AND PROCEDURES Procedure for Environmental Impact Statements § 1794.61 Environmental impact statement. An EIS shall be prepared in accordance with...

  12. Uranium mining: Environmental and health impacts

    International Nuclear Information System (INIS)

    Vance, Robert

    2014-01-01

    Producing uranium in a safe and environmentally responsible manner is important not only to the producers and consumers of the product, but also to society at large. Given expectations of growth in nuclear generating capacity in the coming decades - particularly in the developing world - enhancing awareness of leading practice in uranium mining is important. This was the objective of a recent NEA report entitled Managing Environmental and Health Impacts of Uranium Mining, providing a non-technical overview of the significant evolution of uranium mining practices from the time that it was first mined for military purposes until today. (author)

  13. Environmental impact of high voltage substations

    International Nuclear Information System (INIS)

    Geambasu, C.; Popadiuc, S.; Drobota, C.; Marza, F.

    2004-01-01

    The first Romanian methodology for simultaneous environmental and human risk evaluation in case of HV installations within substations pertaining to nuclear power stations, based on EU regulation is now applicable in Cernavoda substation. High voltage substations are zones where the environmental impact is focused on electromagnetic field that's causes particular effects in living tissues (human being included). That is the reason why is necessary to identify the potential risk sources, the asses including the way to correct them and to dissimulate the results to the staff and the operational personal.(author)

  14. Environmental analysis for pipeline gas demonstration plants

    Energy Technology Data Exchange (ETDEWEB)

    Stinton, L.H.

    1978-09-01

    The Department of Energy (DOE) has implemented programs for encouraging the development and commercialization of coal-related technologies, which include coal gasification demonstration-scale activities. In support of commercialization activities the Environmental Analysis for Pipeline Gas Demonstration Plants has been prepared as a reference document to be used in evaluating potential environmental and socioeconomic effects from construction and operation of site- and process-specific projects. Effluents and associated impacts are identified for six coal gasification processes at three contrasting settings. In general, impacts from construction of a high-Btu gas demonstration plant are similar to those caused by the construction of any chemical plant of similar size. The operation of a high-Btu gas demonstration plant, however, has several unique aspects that differentiate it from other chemical plants. Offsite development (surface mining) and disposal of large quantities of waste solids constitute important sources of potential impact. In addition, air emissions require monitoring for trace metals, polycyclic aromatic hydrocarbons, phenols, and other emissions. Potential biological impacts from long-term exposure to these emissions are unknown, and additional research and data analysis may be necessary to determine such effects. Possible effects of pollutants on vegetation and human populations are discussed. The occurrence of chemical contaminants in liquid effluents and the bioaccumulation of these contaminants in aquatic organisms may lead to adverse ecological impact. Socioeconomic impacts are similar to those from a chemical plant of equivalent size and are summarized and contrasted for the three surrogate sites.

  15. Environmental impact of high voltage aerial transmission lines

    International Nuclear Information System (INIS)

    Silva, R.P.; Mouallen, M.C.; Quintella, S.E.A.

    1989-01-01

    The identification of environmental impacts caused by the aerial transmission lines and the measures for reducing these impacts are discussed, considering the impact over the soil in different areas, biological effects caused by delayed exposure and visual impacts due to the line structures. A methodology for the impact evaluation and the aspects of the Environmental Impact Studies and Environmental Impact Report are also studied. (C.G.C.). 2 refs, 1 fig

  16. Environmental Impact of Teleworking and Teleshopping

    DEFF Research Database (Denmark)

    Falch, Morten

    This paper analyses the impact of two ICT applications on the total demand for transport (telework and teleshopping). These applications are selected as they were expected to be among the applications with the highest potential for savings in transport. The analysis indicates that the total impact...... is limited and might be even negative if rebound effects are included, and that the promotion of ICT applications must be accommodated by other measures before a noticeable positive impact on transport behaviour can be achieved....

  17. 75 FR 31834 - Adoption of Environmental Impact Statement; Availability of an Environmental Reevaluation

    Science.gov (United States)

    2010-06-04

    ... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration Adoption of Environmental Impact...), Department of Transportation (DOT). ACTION: Adoption and Recirculation of Final Environmental Impact... Impact Statement (EIS) issued by the Federal Transit Administration (FTA) in 2004 for the construction of...

  18. Peat 1999. Resources, use, environmental impact

    International Nuclear Information System (INIS)

    2000-01-01

    impact of peat harvesting represents a total destruction of the vegetation where all orig inal plants and animal life disappear. The quality of the drainage water changes as the transport of suspended materials increases in connection with the peat ditching. The pH-value and alkalinity also increase during this phase of preparation, but afterwards they often return to normal values. The concentration of sulphates increases in relation to the sulphur content in the peat during the drainage phase. The stream biota of algae and animals decreases or disappears totally. There is a risk in combustion that rather large quantities of sulphur (depending on the concentration in the peat) is emitted together with nitrogen oxides, all of which are acidifying. Radioactive substances exist naturally in the peat and are released during combustion and are also found together with heavy metals in the ashes. Research and development regarding peat has been initiated by the state and by peat producers. The state financed research is distributed among several universities. The development of methods and techniques by The Foundation of Swedish Peat Research has been financed by peat producers and other actors. The emphasis has been on machine development, but presently water analysis data for peat mines and other environmental issues are also covered. The Swedish National Energy Administration provided SEK 0.4 million out of a total budget of SEK 1 million for 1999. The general trend is to develop traditional peat harvesting methods and make them more efficient. In the future, peat will probably be mixed with other fuels, such as sawdust and other renewable energy sources. This may eventually improve combustion and emission

  19. Peat 2000. Resources, use, environmental impact

    International Nuclear Information System (INIS)

    2001-01-01

    impact of peat harvesting represents a total destruction of the vegetation where all original plants and animal life disappear. The quality of the drainage water changes as the transport of suspended materials increases in connection with the peat ditching. The pH-value and alkalinity also increase during this phase of preparation, but afterwards they often return to normal values. The concentration of sulphates increases in relation to the sulphur content in the peat during the drainage phase. The stream biota of algae and animals decreases or disappears totally. There is a risk in combustion that rather large quantities of sulphur (depending on the concentration in the peat) is emitted together with nitrogen oxides, all of which are acidifying. Radioactive substances exist naturally in the peat and are released during combustion and are also found together with heavy metals in the ashes. Research and development regarding peat has been initiated by the state and by peat producers. The state financed research is distributed among several universities. The development of methods and techniques by The Foundation of Swedish Peat Research has been financed by peat producers and other actors. The emphasis has been on machine development, but presently water analysis data for peat mines and other environmental issues are also covered. The general trend is to develop traditional peat harvesting methods and make them more efficient. In the future, peat will probably be mixed with other fuels, such as sawdust and other renewable energy sources. This may eventually improve combustion and reduce emissions

  20. Environmental impact of climate change in pakistan

    International Nuclear Information System (INIS)

    Khan, S.; Raja, I.A.

    2014-01-01

    Climate change results in the increase or decrease in temperature and rainfall. These have significant impact on environment - impinge agricultural crop yields, affect human health, cause changes to forests and other ecosystems, and even impact our energy supply. Climate change is a global phenomenon and its impact can be observed on Pakistan's economy and environment. This paper contains details concerning the climate change and environmental impacts. It takes into account current and projected key vulnerabilities, prospects for adaptation, and the relationships between climate change mitigation and environment. The purpose of the study is to devise national policies and incentive systems combined with national level capacity-building programs to encourage demand-oriented conservation technologies. Recommendations are also made to abate the climate change related issues in country. (author)

  1. A state-impact-state methodology for assessing environmental impact in land use planning

    International Nuclear Information System (INIS)

    Chen, Longgao; Yang, Xiaoyan; Chen, Longqian; Potter, Rebecca; Li, Yingkui

    2014-01-01

    The implementation of land use planning (LUP) has a large impact on environmental quality. There lacks a widely accepted and consolidated approach to assess the LUP environmental impact using Strategic Environmental Assessment (SEA). In this paper, we developed a state-impact-state (SIS) model employed in the LUP environmental impact assessment (LUPEA). With the usage of Matter-element (ME) and Extenics method, the methodology based on the SIS model was established and applied in the LUPEA of Zoucheng County, China. The results show that: (1) this methodology provides an intuitive and easy understanding logical model for both the theoretical analysis and application of LUPEA; (2) the spatial multi-temporal assessment from base year, near-future year to planning target year suggests the positive impact on the environmental quality in the whole County despite certain environmental degradation in some towns; (3) besides the spatial assessment, other achievements including the environmental elements influenced by land use and their weights, the identification of key indicators in LUPEA, and the appropriate environmental mitigation measures were obtained; and (4) this methodology can be used to achieve multi-temporal assessment of LUP environmental impact of County or Town level in other areas. - Highlights: • A State-Impact-State model for Land Use Planning Environmental Assessment (LUPEA). • Matter-element (ME) and Extenics methods were embedded in the LUPEA. • The model was applied to the LUPEA of Zoucheng County. • The assessment shows improving environment quality since 2000 in Zoucheng County. • The method provides a useful tool for the LUPEA in the county level

  2. A state-impact-state methodology for assessing environmental impact in land use planning

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Longgao [Institute of land resources, Jiangsu Normal University, Xuzhou 221116 (China); Yang, Xiaoyan [Institute of land resources, Jiangsu Normal University, Xuzhou 221116 (China); School of Environmental Science and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116 (China); Chen, Longqian, E-mail: cumt_chenlongqian@163.com [School of Environmental Science and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116 (China); Potter, Rebecca; Li, Yingkui [Department of Geography, University of Tennessee, Knoxville, TN 37996 (United States)

    2014-04-01

    The implementation of land use planning (LUP) has a large impact on environmental quality. There lacks a widely accepted and consolidated approach to assess the LUP environmental impact using Strategic Environmental Assessment (SEA). In this paper, we developed a state-impact-state (SIS) model employed in the LUP environmental impact assessment (LUPEA). With the usage of Matter-element (ME) and Extenics method, the methodology based on the SIS model was established and applied in the LUPEA of Zoucheng County, China. The results show that: (1) this methodology provides an intuitive and easy understanding logical model for both the theoretical analysis and application of LUPEA; (2) the spatial multi-temporal assessment from base year, near-future year to planning target year suggests the positive impact on the environmental quality in the whole County despite certain environmental degradation in some towns; (3) besides the spatial assessment, other achievements including the environmental elements influenced by land use and their weights, the identification of key indicators in LUPEA, and the appropriate environmental mitigation measures were obtained; and (4) this methodology can be used to achieve multi-temporal assessment of LUP environmental impact of County or Town level in other areas. - Highlights: • A State-Impact-State model for Land Use Planning Environmental Assessment (LUPEA). • Matter-element (ME) and Extenics methods were embedded in the LUPEA. • The model was applied to the LUPEA of Zoucheng County. • The assessment shows improving environment quality since 2000 in Zoucheng County. • The method provides a useful tool for the LUPEA in the county level.

  3. 23 CFR 771.123 - Draft environmental impact statements.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Draft environmental impact statements. 771.123 Section... ENVIRONMENT ENVIRONMENTAL IMPACT AND RELATED PROCEDURES § 771.123 Draft environmental impact statements. (a) A... significant impacts on the environment. When the applicant, after consultation with any project sponsor that...

  4. ENVIRONMENTAL PRACTICE DISCOURSE AND ISOMORPHISM IN HIGH ENVIRONMENTAL IMPACT COMPANIES LISTED ON BM&FBOVESPA

    Directory of Open Access Journals (Sweden)

    Benedito Manoel do Nascimento Costa

    2016-08-01

    Full Text Available Organizations are submitted to social pressure towards making decisions for the sake of more environmental responsibility. These organizations respond by adopting managing strategies, and by developing environmental policies whose results must be demonstrated to stakeholders. In this scenario, this study aims at analyzing the characteristics of environmental information presented in management reports, in explanatory notes and in balance sheets produced by companies with a high environmental impact listed on BM&FBovespa, identifying possible isomorphic behaviors. In order to reach that goal, a qualitative research was conducted with an analysis of management reports, balance sheets and explanatory notes for the years 2011, 2012 and 2013 by 44 companies. Results provide evidence that companies present similar behavior concerning environmental issues. The management reports contain the largest amount of information related to the environment, the most highlighted categories were Environmental Policies, Product Impact, Processes and Other environmental information. Besides that, the segments that disclosed the most environmental information were Paper and Cellulose, Metalworking, Exploration and Refinement whereas the largest companies, evaluated by total assets, disclosed more environmental information.

  5. Outline of environmental impact of waste management

    International Nuclear Information System (INIS)

    1979-09-01

    This document presents background information on the environmental impacts from the management and disposal of radioactive waste for seven reference fuel cycles selected by INFCE Working Group 7, but excluding the health and safety impact on man. The main factors considered were: use of natural resources, land, water, energy, labour and materials; effects of chemical and thermal effluents; effects of meteorology, hydrology and natural hazards; and social effects. The environmental impacts are generally largest for the once-through fuel cycles and smallest for the FBR and HWR U/Th cycles, due to the impacts being correlated to uranium requirements. The main impact is the use of land which varies from 0.1 - 1.6 ha/GWa with the FBR strategy requiring the smallest use of land and the LWR once-through strategy the largest. The land use for mill tailings is, except for the FBR and U/Th cycles, dominant compared to the land use for the rest of the fuel cycle

  6. Environmental impacts associated with Project Rio Blanco

    International Nuclear Information System (INIS)

    Alldredge, A.W.; Whicker, F.W.; Hanson, W.C.

    Project Rio Blanco, an experiment involving deep underground detonation of three 30-kton nuclear explosives designed to stimulate natural gas flow in geologic formations of low permeability, was conducted in western Colorado on 17 May 1973. Environmental impacts associated with this experiment were divided into three categories: radiation, ground motion, and conventional physical activities. Radiation and ground motion are unique to this type experiment while conventional activities would be associated with any type of resource development. The objective of observations made at Rio Blanco was to qualitatively and, where possible, quantitatively ascertain environmental impacts associated with the project. Observations indicated that ground motion and conventional activities appeared to cause the greatest impacts. Ground motion impacts were most severe within 2.4 km of the emplacement well (EW) and were predominantly associated with steep ravine and stream banks and rocky cliffs. Following the detonation, flow and turbidity had increased in a small stream adjacent to the EW. Animals receiving deleterious impacts were those associated with stream banks, cliffs and burrows. No mortality or injury was observed in any large animals. (U.S.)

  7. Manual: environmental impact statement and intervention regulation

    International Nuclear Information System (INIS)

    Neumann, K.

    1992-01-01

    In order to be able to fulfil also legally the important tasks of environmental protection and natural preservation in the last ten years numerous legal provisions have been issued. Many of these laws require that the environmental impact of projects and constructional measures is taken into account to a higher degree. Two important instruments in this connection are the impact statement and the intervention regulation of natural preservation. Their importance and consequences for the planning and realization of projects are until now not sufficiently know. This manual is to fill this gap. This booklet shall help builder-owners and investors to realize their building projects in a way which is compatible with the environment. For architects and planners information is given in this manual about the requirements to be fulfilled in the individual planning and licensing procedures. The booklet is structured in a way that builder-owners, consultants and authorities find quickly the information needed. (orig./KW) [de

  8. Methodologies for evaluation of environmental capacity and impact due to radioactive releases by critical path analysis and their application to the IPEN's aquatic environment as a typical case study

    International Nuclear Information System (INIS)

    Chandra, U.

    1986-01-01

    A brief description of the tested concepts, for determination of environmental capacity and impact by critical path analysis technique and of dose limitation/optmization for radioactive releases is made. These concepts/methodologies are being applied in the environment of IPEN. The aquatic environment of IPEN is dealt with in detal with a view to evaluate the possible critical paths, its capacity, and present and future radiological impacts. (Author) [pt

  9. Decision-making and environmental impacts

    OpenAIRE

    Elmquist, Helena; Lindgren, Urban; Mäkilä, Kalle

    2004-01-01

    This report describes an interdisciplinary study combining social sciences and natural sciences in an integrated simulation model. The integrated dynamic simulation model consists of the interplay between the decision-making farmer, the physical flows at the farm and the structural conditions that influence the business. The central question studied here concerned the energy use, environmental impacts and business economics of various decision models in comparison to different levels of envir...

  10. Environmental Science: Processes & Impacts in 2018.

    Science.gov (United States)

    2018-02-21

    2017 was another successful year for Environmental Science: Processes & Impacts (ESPI); it saw the expansion of our Editorial team and publication of two excellent Themed Issues, all while maintaining our commitment to provide our authors with exceptional customer service and fast times to publication. Through this Editorial, we wish to reflect upon some of the highlights from 2017 and also take this opportunity to reveal further new additions to the ESPI team and our plans for 2018.

  11. Uncertainty analysis of environmental models

    International Nuclear Information System (INIS)

    Monte, L.

    1990-01-01

    In the present paper an evaluation of the output uncertainty of an environmental model for assessing the transfer of 137 Cs and 131 I in the human food chain are carried out on the basis of a statistical analysis of data reported by the literature. The uncertainty analysis offers the oppotunity of obtaining some remarkable information about the uncertainty of models predicting the migration of non radioactive substances in the environment mainly in relation to the dry and wet deposition

  12. Refractory of Furnaces to Reduce Environmental Impact

    Science.gov (United States)

    Hanzawa, Shigeru

    2011-10-01

    The energy load of furnaces used in the manufacturing process of ceramics is quite large. Most of the environmental impact of ceramics manufacturing is due to the CO2 produced from this high energy load. To improve this situation, R&D has focused on furnace systems and techniques of control in order to reduce energy load. Since furnaces are comprised of refractory, consideration of their mechanical and thermal characteristics is important. Herein are described several refractory types which were chosen through comparison of the characteristics which contribute to heat capacity reduction, heat insulating reinforcement and high emissivity, thereby improving thermal radiation heat transfer efficiency to the ceramic articles. One selected refractory material which will reduce the environmental impact of a furnace, chosen considering low heat capacity and high emissivity characteristics, is SiC. In this study, thermal radiation heat transfer efficiency improvement and its effect on ceramic articles in the furnace and oxidation behaviour were investigated at 1700K. A high density SiC refractory, built into the furnace at construction, has relatively high oxidation durability and has the ability to reduce environmental impact-CO2 by 10 percent by decreasing the furnace's energy load. However, new oxidation prevention techniques for SiC will be necessary for long-term use in industrial furnaces, because passive to active oxidation transition behaviour of commercial SiC refractory is coming to close ideal.

  13. Refractory of Furnaces to Reduce Environmental Impact

    International Nuclear Information System (INIS)

    Hanzawa, Shigeru

    2011-01-01

    The energy load of furnaces used in the manufacturing process of ceramics is quite large. Most of the environmental impact of ceramics manufacturing is due to the CO 2 produced from this high energy load. To improve this situation, R and D has focused on furnace systems and techniques of control in order to reduce energy load. Since furnaces are comprised of refractory, consideration of their mechanical and thermal characteristics is important. Herein are described several refractory types which were chosen through comparison of the characteristics which contribute to heat capacity reduction, heat insulating reinforcement and high emissivity, thereby improving thermal radiation heat transfer efficiency to the ceramic articles. One selected refractory material which will reduce the environmental impact of a furnace, chosen considering low heat capacity and high emissivity characteristics, is SiC. In this study, thermal radiation heat transfer efficiency improvement and its effect on ceramic articles in the furnace and oxidation behaviour were investigated at 1700K. A high density SiC refractory, built into the furnace at construction, has relatively high oxidation durability and has the ability to reduce environmental impact-CO 2 by 10 percent by decreasing the furnace's energy load. However, new oxidation prevention techniques for SiC will be necessary for long-term use in industrial furnaces, because passive to active oxidation transition behaviour of commercial SiC refractory is coming to close ideal.

  14. Critical factors in environmental impact assessment

    International Nuclear Information System (INIS)

    Creasey, R.

    1999-01-01

    Environmental impact assessment (EIA) has shown that it is of proven benefit to the overall planning and environmental management of resource development projects, but certain elements within the application and practice of EIA remain problematic for proponents and regulatory decision makers alike. The use of the word 'critical' in the title of this paper suggests that if the components identified are not considered or implemented properly through the process of EIA, the product will be of less value to both the proponent and decision maker. In the context of EIA, the regulatory, financial, legal and social benefits that accrue make the need for good EIA practice even more imperative. A discussion is included that highlights a number of issues that need to be addressed to improve the effectiveness of EIA, a tool necessary to attaining provincial and federal regulatory approvals. To a large extent, the discussion reflects items of contemporary public concern, and those emerging issues of the scientific and regulatory community. At the same time, it needs to be realized that not all the identified items are necessarily new to the practice of impact assessment, but are nonetheless important to professional environmental impact assessment and decision making. Insight is also provided into the direction of decision making of the Energy and Utilities Board as it will affect the regulatory review and administration of resource development projects in the province of Alberta. 16 refs

  15. Proposed energy conservation contingency plan: emergency restrictions on illuminated advertising and certain gas lighting. Economic impact analysis. Environmental impact assessment. Contingency plan No. 5

    Energy Technology Data Exchange (ETDEWEB)

    1976-09-01

    In the event of a severe energy supply disruption or in order to fulfill obligations of the U.S. under the International Energy Program, the President may implement one or more energy conservation contingency plans provided for in the Energy Policy and Conservation Act (EPCA) of 1975. This report describes the economic impact of restrictions on the use of illuminated advertising and certain gas lighting. The proposed plan would reduce demand for electricity and natural gas. The reduced demand for electricity would result in reduced demand for oil, natural gas, and other fuels used to generate electricity. Since oil and natural gas would be in short supply, the reduced use of these fuels in the generation of electricity could make supplies available to other industries. By contrast, the coal supply would not be affected by these conditions. However, the substitutability of coal for fuels in short supply (especially oil for electric generation) would tend to offset the impact of reduced demand for coal to generate electricity. Advertising expenditures would shift. Expenditures for illuminated outdoor signs would fall and expenditures for advertising in other media (e.g., radio, newspapers) would rise. No significant effect upon aggregate retail sales is anticipated. In summary, microeconomic effects of the measure are negligible and all effects are minor and/or beneficial. These effects are almost lost in the projected economic effects that would result from any severe supply interruption.

  16. Hydroelectric power and global environmental problems: benefits and environmental impacts

    International Nuclear Information System (INIS)

    Chabot, B.

    1992-01-01

    The risk of global warming is one of the most serious global environmental problems. It is due to the increase of greenhouse gases emissions, mainly because of the use of fossil fuels in the energy sector, particularly for electricity generation. At an international level, experts now agree that measures are to be taken to reduce this risk. In the energy sector, an improvement of energy efficiency and an increase of nuclear electricity generation are often presented as the best available solutions. Renewable energy sources are often presented as a solution with a negligible potential impact, and sometimes, hydro power is even forgotten, or its coasts and its potential impacts on local environment are presented as an obstacle to its positive contribution to the reduction of global warming risk. Without denying the positive impacts of other solutions, this paper explains the possibilities and the benefits of an increased use of hydroelectric power, when implemented with a minimum impact on local environment and with a synergistic effect with the rational use of generated energy, in order to have access to a sustainable development. 19 refs., 6 figs

  17. Timor-Leste : Country Environmental Analysis

    OpenAIRE

    World Bank

    2009-01-01

    The Country Environmental Analysis (CEA) for Timor-Leste identifies environmental priorities through a systematic review of environmental issues in natural resources management and environmental health in the context of the country's economic development and environmental institutions. Lack of data has been the main limitation in presenting a more rigorous analysis. Nevertheless, the repor...

  18. Envirotyping for deciphering environmental impacts on crop plants.

    Science.gov (United States)

    Xu, Yunbi

    2016-04-01

    Global climate change imposes increasing impacts on our environments and crop production. To decipher environmental impacts on crop plants, the concept "envirotyping" is proposed, as a third "typing" technology, complementing with genotyping and phenotyping. Environmental factors can be collected through multiple environmental trials, geographic and soil information systems, measurement of soil and canopy properties, and evaluation of companion organisms. Envirotyping contributes to crop modeling and phenotype prediction through its functional components, including genotype-by-environment interaction (GEI), genes responsive to environmental signals, biotic and abiotic stresses, and integrative phenotyping. Envirotyping, driven by information and support systems, has a wide range of applications, including environmental characterization, GEI analysis, phenotype prediction, near-iso-environment construction, agronomic genomics, precision agriculture and breeding, and development of a four-dimensional profile of crop science involving genotype (G), phenotype (P), envirotype (E) and time (T) (developmental stage). In the future, envirotyping needs to zoom into specific experimental plots and individual plants, along with the development of high-throughput and precision envirotyping platforms, to integrate genotypic, phenotypic and envirotypic information for establishing a high-efficient precision breeding and sustainable crop production system based on deciphered environmental impacts.

  19. 10 CFR 51.74 - Distribution of draft environmental impact statement and supplement to draft environmental impact...

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of draft environmental impact statement and supplement to draft environmental impact statement; news releases. 51.74 Section 51.74 Energy NUCLEAR... Impact Statements § 51.74 Distribution of draft environmental impact statement and supplement to draft...

  20. Environmental impact statement 1987. Umweltgutachten 1987

    Energy Technology Data Exchange (ETDEWEB)

    1988-01-01

    In its third statement after 1974 and 1978 the Council of Environmental Experts describes the state of the environment and points out misdevelopments and ways of avoiding them. The subject's complexity defies the environmental impact statement's completeness. Other than the two preceding ones the 1987 statement focuses but on selected fields and aspects. In view of the fact that the environmental policy of the late eighties and of the nineties to come requires a general, transsectoral and balanced concept the statement puts much care into a comprehensive discussion of the basic traits of a general environmental policy. The characteristics worked out are applicable to any environmental sector and include man's consciousness of the environment and his behaviour towards it, active pollution abatement, economic aspects, and the structure of pollution sources in the Federal Republic of Germany. While the sectors of pollution control include ground and air pollution abatement the selected fields comprise environment and health, energy, transportation, regional planning, and recreation and tourism. (orig./HSCH).

  1. Environmental sampling for trace analysis

    International Nuclear Information System (INIS)

    Markert, B.

    1994-01-01

    Often too little attention is given to the sampling before and after actual instrumental measurement. This leads to errors, despite increasingly sensitive analytical systems. This is one of the first books to pay proper attention to representative sampling. It offers an overview of the most common techniques used today for taking environmental samples. The techniques are clearly presented, yield accurate and reproducible results and can be used to sample -air - water - soil and sediments - plants and animals. A comprehensive handbook, this volume provides an excellent starting point for researchers in the rapidly expanding field of environmental analysis. (orig.)

  2. Determining Vulnerability Importance in Environmental Impact Assessment

    International Nuclear Information System (INIS)

    Toro, Javier; Duarte, Oscar; Requena, Ignacio; Zamorano, Montserrat

    2012-01-01

    The concept of vulnerability has been used to describe the susceptibility of physical, biotic, and social systems to harm or hazard. In this sense, it is a tool that reduces the uncertainties of Environmental Impact Assessment (EIA) since it does not depend exclusively on the value assessments of the evaluator, but rather is based on the environmental state indicators of the site where the projects or activities are being carried out. The concept of vulnerability thus reduces the possibility that evaluators will subjectively interpret results, and be influenced by outside interests and pressures during projects. However, up until now, EIA has been hindered by a lack of effective methods. This research study analyzes the concept of vulnerability, defines Vulnerability Importance and proposes its inclusion in qualitative EIA methodology. The method used to quantify Vulnerability Importance is based on a set of environmental factors and indicators that provide a comprehensive overview of the environmental state. The results obtained in Colombia highlight the usefulness and objectivity of this method since there is a direct relation between this value and the environmental state of the departments analyzed. - Research Highlights: ► The concept of vulnerability could be considered defining Vulnerability Importance included in qualitative EIA methodology. ► The use of the concept of environmental vulnerability could reduce the subjectivity of qualitative methods of EIA. ► A method to quantify the Vulnerability Importance proposed provides a comprehensive overview of the environmental state. ► Results in Colombia highlight the usefulness and objectivity of this method.

  3. Assessment of environmental impacts following alternative agricultural policy scenarios.

    Science.gov (United States)

    Bárlund, I; Lehtonen, H; Tattari, S

    2005-01-01

    Abstract Finnish agriculture is likely to undergo major changes in the near and intermediate future. The ifuture policy context can be examined at a general level by strategic scenario building. Computer-based modelling in combination with agricultural policy scenarios can in turn create a basis for the assessments of changes in environmental quality following possible changes in Finnish agriculture. The analysis of economic consequences is based on the DREMFIA model, which is applied to study effects of various agricultural policies on land use, animal production, and farmers' income. The model is suitable for an impact analysis covering an extended time span--here up to the year 2015. The changes in land use, obtained with the DREMFIA model assuming rational economic behaviour, form the basis when evaluating environmental impacts of different agricultural policies. The environmental impact assessment is performed using the field scale nutrient transport model ICECREAM. The modelled variables are nitrogen and phosphorus losses in surface runoff and percolation. In this paper the modelling strategy will be presented and highlighted using two case study catchments with varying environmental conditions and land use as an example. In addition, the paper identifies issues arising when connecting policy scenarios with impact modelling.

  4. 7 CFR 1955.136 - Environmental Assessment (EA) and Environmental Impact Statement (EIS).

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 14 2010-01-01 2009-01-01 true Environmental Assessment (EA) and Environmental Impact... Disposal of Inventory Property General § 1955.136 Environmental Assessment (EA) and Environmental Impact Statement (EIS). (a) Prior to a final decision on some disposal actions, an environmental assessment must be...

  5. Underwater noise modelling for environmental impact assessment

    Energy Technology Data Exchange (ETDEWEB)

    Farcas, Adrian [Centre for Environment, Fisheries and Aquaculture Science (Cefas), Pakefield Road, Lowestoft, NR33 0HT (United Kingdom); Thompson, Paul M. [Lighthouse Field Station, Institute of Biological and Environmental Sciences, University of Aberdeen, Cromarty IV11 8YL (United Kingdom); Merchant, Nathan D., E-mail: nathan.merchant@cefas.co.uk [Centre for Environment, Fisheries and Aquaculture Science (Cefas), Pakefield Road, Lowestoft, NR33 0HT (United Kingdom)

    2016-02-15

    Assessment of underwater noise is increasingly required by regulators of development projects in marine and freshwater habitats, and noise pollution can be a constraining factor in the consenting process. Noise levels arising from the proposed activity are modelled and the potential impact on species of interest within the affected area is then evaluated. Although there is considerable uncertainty in the relationship between noise levels and impacts on aquatic species, the science underlying noise modelling is well understood. Nevertheless, many environmental impact assessments (EIAs) do not reflect best practice, and stakeholders and decision makers in the EIA process are often unfamiliar with the concepts and terminology that are integral to interpreting noise exposure predictions. In this paper, we review the process of underwater noise modelling and explore the factors affecting predictions of noise exposure. Finally, we illustrate the consequences of errors and uncertainties in noise modelling, and discuss future research needs to reduce uncertainty in noise assessments.

  6. Underwater noise modelling for environmental impact assessment

    International Nuclear Information System (INIS)

    Farcas, Adrian; Thompson, Paul M.; Merchant, Nathan D.

    2016-01-01

    Assessment of underwater noise is increasingly required by regulators of development projects in marine and freshwater habitats, and noise pollution can be a constraining factor in the consenting process. Noise levels arising from the proposed activity are modelled and the potential impact on species of interest within the affected area is then evaluated. Although there is considerable uncertainty in the relationship between noise levels and impacts on aquatic species, the science underlying noise modelling is well understood. Nevertheless, many environmental impact assessments (EIAs) do not reflect best practice, and stakeholders and decision makers in the EIA process are often unfamiliar with the concepts and terminology that are integral to interpreting noise exposure predictions. In this paper, we review the process of underwater noise modelling and explore the factors affecting predictions of noise exposure. Finally, we illustrate the consequences of errors and uncertainties in noise modelling, and discuss future research needs to reduce uncertainty in noise assessments.

  7. Analysis of environmental impact phase in the life cycle of a nuclear power plant; Analisis de la fase de impacto ambiental en el ciclo de vida de una central nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez del M, C.

    2015-07-01

    The life-cycle analysis covers the environmental aspects of a product throughout its life cycle. The focus of this study was to apply a methodology of life-cycle analysis for the environmental impact assessment of a nuclear power plant by analyzing international standards ISO 14040 and 14044. The methodology of life-cycle analysis established by the ISO 14044 standard was analyzed, as well as the different impact assessment methodologies of life cycle in order to choose the most appropriate for a nuclear power plant; various tools for the life-cycle analysis were also evaluated, as is the use of software and the use of databases to feed the life cycle inventory. The functional unit chosen was 1 KWh of electricity, the scope of analysis ranging from the construction and maintenance, disposal of spent fuel to the decommissioning of the plant, the manufacturing steps of the fuel were excluded because in Mexico is not done this stage. For environmental impact assessment was chosen the Recipe methodology which evaluates up to 18 impact categories depending on the project. In the case of a nuclear power plant were considered only categories of depletion of the ozone layer, climate change, ionizing radiation and formation of particulate matter. The different tools for life-cycle analysis as the methodologies of impact assessment of life cycle, different databases or use of software have been taken according to the modeling of environmental sensitivities of different regions, because in Mexico the methodology for life-cycle analysis has not been studied and still do not have all the tools necessary for the evaluation, so the uncertainty of the data supplied and results could be higher. (Author)

  8. Public Participation in Environmental Impact Assessment (EIA and Major Sports Events: A Comparative Analysis of the London 2012 Olympic Games and the Rio 2007 Pan American Games

    Directory of Open Access Journals (Sweden)

    Gisele Silva Pereira

    2015-01-01

    Full Text Available This paper explores public participation in environmental impact assessment (EIA and the decision making in the context of major sports events and their associated infrastructure in Brazil and England. The methodology is based on detailed case study analysis involving document analysis and interviews with key stakeholders. The results demonstrated that there is evidence that public participation within the EIA process informed the decision making and planning process for London 2012 and for the Pan American Village of the Rio 2007 Games. Finally, a practical recommendation for the Brazilian context and recommendations for further research are made. Participação pública na Avaliação de Impacto Ambiental (AIA e megaeventos esportivos: uma análise comparativa dos Jogos Olímpicos de Londres 2012 e dos Jogos Pan Americanos do Rio 2007 - Este artigo explora a participação pública na Avaliação de Impacto Ambiental (AIA e a tomada de decisão no contexto de megaeventos esportivos e a infraestrutura associada no Brasil e na Inglaterra. A metodologia baseia-se em estudo de caso envolvendo análise de documentos e entrevistas com atores-chave. Os resultados demonstraram que há evidência de que a participação pública integrante do processo de AIA informou a tomada de decisão e o processo de planejamento para Londres 2012 e para a Vila Pan Americana dos Jogos do Rio 2007. Finalmente, uma recomendação prática para o contexto brasileiro e recomendações para pesquisas futuras são destacadas.

  9. Environmental Impact Study - Impact Report on the Environment: analysis of the present legislation and the perspectives. An approach related to the electric sector; EIA - RIMA : analise atual legislacao e as perspectivas. Uma abordagem relativa ao setor eletrico

    Energy Technology Data Exchange (ETDEWEB)

    Borelli, Alessio Bento [Secretaria de Energia do Estado de Sao Paulo, Sao Paulo (Brazil)

    1994-07-01

    The present work analyze the present legal structure for environment protection considering the impacts to which the nature is submitted as consequence of the electric power generation transmission and distribution. The work evaluate the the legal directives for elaboration of environmental impact study, as far the pertinence and applicability related to the objectives to be attained is concerned.

  10. Exergetic and environmental analysis of a pulverized coal power plant

    International Nuclear Information System (INIS)

    Restrepo, Álvaro; Miyake, Raphael; Kleveston, Fábio; Bazzo, Edson

    2012-01-01

    This paper presents the results of exergetic and environmental analysis of a typical pulverized coal power plant located in Brazil. The goal was to quantify both the exergy destruction and the environmental impact associated with a thermal power plant. The problem boundary consists of the entire coal delivery route, including mining and beneficiation, transport, pre-burning processes and the power plant. The used data were obtained mainly from field measurements taken in all system processes, from mining to the power plant. The study focused only on the operation period. Previous works have shown that the construction and decommissioning periods contribute less than 1% of the environmental impact. The exergetic analysis was based on the second law of thermodynamics while the environmental analysis was based on life cycle assessment (LCA) using SimaPro 7.2, focussing on the climate change and acidification impact categories. The CO 2 -eq emission was 1300 kg per MWh. The highest degree of environmental impact occurred during the combustion process. The exergetic and environmental analysis provides a tool to evaluate irreversibilities and the environmental impact, identifying the most significant stages and equipment of the entire power generation process. -- Highlights: ► Exergetic and environmental analysis of a typical Brazilian PC power plant. ► Environmental impact associated with the mining, transport and thermal power plant. ► Life cycle assessment used for environmental analysis. ► Acidification impact category evaluated using Eco-indicator 99. ► Climate change impact evaluation using (Global Warming Potential) GWP 100a.

  11. Overview of Environmental Impact Assessment of Oil and Gas ...

    African Journals Online (AJOL)

    The environmental impact assessment (EIA) of oil and gas projects in Nigeria ... natural, social and health components of the environment; Determination of issues ... of impact quantification through which the Environmental Management Plan ...

  12. 78 FR 46677 - Environmental Impact Statement; Calcasieu Parish, LA

    Science.gov (United States)

    2013-08-01

    ... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Environmental Impact Statement...: The Federal Highway Administration is issuing this notice to advise the public that an Environmental Impact Statement (EIS) will be prepared for a proposed transportation project in Calcasieu Parish...

  13. World Aquaculture: Environmental Impacts and Troubleshooting Alternatives

    Science.gov (United States)

    Martinez-Porchas, Marcel; Martinez-Cordova, Luis R.

    2012-01-01

    Aquaculture has been considered as an option to cope with the world food demand. However, criticisms have arisen around aquaculture, most of them related to the destruction of ecosystems such as mangrove forest to construct aquaculture farms, as well as the environmental impacts of the effluents on the receiving ecosystems. The inherent benefits of aquaculture such as massive food production and economical profits have led the scientific community to seek for diverse strategies to minimize the negative impacts, rather than just prohibiting the activity. Aquaculture is a possible panacea, but at present is also responsible for diverse problems related with the environmental health; however the new strategies proposed during the last decade have proven that it is possible to achieve a sustainable aquaculture, but such strategies should be supported and proclaimed by the different federal environmental agencies from all countries. Additionally there is an urgent need to improve legislation and regulation for aquaculture. Only under such scenario, aquaculture will be a sustainable practice. PMID:22649291

  14. World Aquaculture: Environmental Impacts and Troubleshooting Alternatives

    Directory of Open Access Journals (Sweden)

    Marcel Martinez-Porchas

    2012-01-01

    Full Text Available Aquaculture has been considered as an option to cope with the world food demand. However, criticisms have arisen around aquaculture, most of them related to the destruction of ecosystems such as mangrove forest to construct aquaculture farms, as well as the environmental impacts of the effluents on the receiving ecosystems. The inherent benefits of aquaculture such as massive food production and economical profits have led the scientific community to seek for diverse strategies to minimize the negative impacts, rather than just prohibiting the activity. Aquaculture is a possible panacea, but at present is also responsible for diverse problems related with the environmental health; however the new strategies proposed during the last decade have proven that it is possible to achieve a sustainable aquaculture, but such strategies should be supported and proclaimed by the different federal environmental agencies from all countries. Additionally there is an urgent need to improve legislation and regulation for aquaculture. Only under such scenario, aquaculture will be a sustainable practice.

  15. The Impact of Gender Inequality and Environmental Degradation on Human Well-Being in The Case of Pakistan: A Time Series Analysis

    OpenAIRE

    Bibi, Chan; Audi, Marc; Ali, Amjad

    2017-01-01

    This study has investigated the impact of gender inequality and environmental degradation on human well-being in the case of Pakistan from 1980 to 2014. Augmented Dickey-Fuller unit root test is used for stationarity of the variables. Autoregressive Distributed Lag model (ARDL) is used for co-integration among the variables of the model. The results show that gender inequality has a negative and significant impact on human well-being in Pakistan, while gender equality encourages human well-be...

  16. Research gaps related to the environmental impacts of electronic cigarettes

    OpenAIRE

    Chang, Hoshing

    2014-01-01

    Objective To consider the research gaps related to the environmental impacts of electronic cigarettes due to their manufacture, use and disposal. Methods Literature searches were conducted through December 2013. Studies were included in this review if they related to the environmental impacts of e-cigarettes. Results Scientific information on the environmental impacts of e-cigarette manufacturing, use and disposal is very limited. No studies formally evaluated the environmental impacts of the...

  17. Environmental impacts the of production and use of biodiesel.

    Science.gov (United States)

    Živković, Snežana; Veljković, Milan

    2018-01-01

    Biodiesel as renewable, environmental friendly, less toxic, and biodegradable is an attractive alternative to fossil fuels and is produced mainly from vegetable oils and animal fats. It is expected, globally, that the use of renewable biofuels, in general, will increase rapidly in the near future. The growing biodiesel production and usage have encouraged assessment of its impact on the environment. The present paper reviews various aspects of biodiesel production using commercial processing technology and biodiesel use through evaluation and analysis of the studies concerning environmental impacts of biodiesel. As a general conclusion, it can be said that biodiesel has the potential to offer a series of perceived benefits such as political, economical, and agricultural, as well as environmental (due to its biodegradability, less toxicity, renewability) and health (greenhouse gas-saving, less harmful exhaust emissions).

  18. Deciding over nature: Corruption and environmental impact assessments

    International Nuclear Information System (INIS)

    Williams, Aled; Dupuy, Kendra

    2017-01-01

    Environmental Impact Assessments (EIAs) are an important analytic tool for identifying and potentially mitigating project risks and negative environmental and societal impacts. Their usefulness, however, depends on how they are implemented and on whether findings are used in public decision-making. Given the notorious vulnerability of public-private interactions to corrupt practices, we examine potential and actual corruption risks across four stages of a generic EIA process. Combined with case analysis of the EIA process in Albania, a Southeastern European context experiencing serious governance challenges, we reflect on the vulnerabilities of EIAs to various forms of corruption from a principal-agent perspective. We concur with earlier research suggesting that the fundamentally rationalist approach behind EIAs do not necessarily match the empirical realities of public environmental decision-making, particularly in less mature EIA systems. We conclude with suggestions for framing a future research agenda in this area and touch on tentative policy remedies.

  19. Environmental systems analysis of wastewater management

    International Nuclear Information System (INIS)

    Kaerrman, Erik

    2000-01-01

    The history of wastewater management tells us that efforts have been made at solving only one problem at the time; sanitation during the first half of the 20th Century followed by eutrophication of lakes and sea and, for the past ten years, recycling of nutrients. After the 'Brundtland Report', 1987, a reversal of the debate occurred where water management was discussed in a more holistic manner than before. The concept sustainable development became widely accepted and was put into practice. This thesis suggests a framework for evaluating the sustainability of wastewater systems, which contains the use of criteria and system analytical evaluation methods matching each criterion. The main categories of criteria are identified as: Health and Hygiene, Social and Cultural, Environmental, Economic and Functional and Technical. The usability of different concepts of Environmental Systems Analysis for evaluating environmental criteria of wastewater systems is also investigated. These studies show that a substance-flow model combined with evaluation methods from Life Cycle Assessment (LCA), sometimes complemented with Exergy Analysis or Analysis of Primary Energy, is a beneficial approach for evaluating environmental impacts and the usage of resources. The substance-flow model ORWARE (ORganic WAste REsearch) combined with LCA was used to compare four systems structures for the management of household wastewater and solid organic waste, namely Conventional System, Irrigation of Energy Forests, Liquid Composting and Urine Separation. This study shows a potential for further development of the three alternative systems. The comparative study also included some development of system analytical methods. This thesis shows how the contribution from oxidation of ammonia should be included in the eutrophication impact category. Furthermore, a method is given for prioritization of the most relevant impacts from wastewater management by using normalisation of these impacts in

  20. 16 CFR 1021.14 - Environmental impact statement.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Environmental impact statement. 1021.14 Section 1021.14 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL ENVIRONMENTAL REVIEW Contents of Environmental Review Documents § 1021.14 Environmental impact statement. (a) Draft and final...

  1. 75 FR 39527 - Environmental Impacts Statements; Notice of Availability

    Science.gov (United States)

    2010-07-09

    ... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-8991-3] Environmental Impacts Statements; Notice of....epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements filed 06/28/2010 through... Transportation's Federal Transit Administration (FTA) Final 20100230 filed with the Environmental Protection...

  2. 78 FR 75919 - Environmental Impact Statements; Notice of Availability

    Science.gov (United States)

    2013-12-13

    ... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-9012-5] Environmental Impact Statements; Notice of....epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements filed 12/02/2013 through... Railroad Relocation Planning and Environmental Study, Review Period Ends: 01/13/2014, Contact: John Winkle...

  3. 24 CFR 58.37 - Environmental impact statement determinations.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Environmental impact statement... Classification § 58.37 Environmental impact statement determinations. (a) An EIS is required when the project is... and Urban Development ENVIRONMENTAL REVIEW PROCEDURES FOR ENTITIES ASSUMING HUD ENVIRONMENTAL...

  4. 77 FR 49792 - Environmental Impacts Statements; Notice of Availability

    Science.gov (United States)

    2012-08-17

    ... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-9004-5] Environmental Impacts Statements; Notice of....epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements Filed 08/06/2012 Through..., USFS, CA, On Top Hazardous Fuels Reduction Project, To Disclose the Environmental Effects of a Federal...

  5. Combination of equilibrium models and hybrid life cycle-input–output analysis to predict the environmental impacts of energy policy scenarios

    International Nuclear Information System (INIS)

    Igos, Elorri; Rugani, Benedetto; Rege, Sameer; Benetto, Enrico; Drouet, Laurent; Zachary, Daniel S.

    2015-01-01

    Highlights: • The environmental impacts of two energy policy scenarios in Luxembourg are assessed. • Computable General Equilibrium (CGE) and Partial Equilibrium (PE) models are used. • Results from coupling of CGE and PE are integrated in hybrid Life Cycle Assessment. • Impacts due to energy related production and imports are likely to grow over time. • Carbon mitigation policies seem to not substantially decrease the impacts’ trend. - Abstract: Nowadays, many countries adopt an active agenda to mitigate the impact of greenhouse gas emissions by moving towards less polluting energy generation technologies. The environmental costs, directly or indirectly generated to achieve such a challenging objective, remain however largely underexplored. Until now, research has focused either on pure economic approaches such as Computable General Equilibrium (CGE) and partial equilibrium (PE) models, or on (physical) energy supply scenarios. These latter could be used to evaluate the environmental impacts of various energy saving or cleaner technologies via Life Cycle Assessment (LCA) methodology. These modelling efforts have, however, been pursued in isolation, without exploring the possible complementarities and synergies. In this study, we have undertaken a practical combination of these approaches into a common framework: on the one hand, by coupling a CGE with a PE model, and, on the other hand, by linking the outcomes from the coupling with a hybrid input–output−process based life cycle inventory. The methodological framework aimed at assessing the environmental consequences of two energy policy scenarios in Luxembourg between 2010 and 2025. The study highlights the potential of coupling CGE and PE models but also the related methodological difficulties (e.g. small number of available technologies in Luxembourg, intrinsic limitations of the two approaches, etc.). The assessment shows both environmental synergies and trade-offs due to the implementation of

  6. 10 CFR 51.95 - Postconstruction environmental impact statements.

    Science.gov (United States)

    2010-01-01

    ... NRC staff will prepare a supplement to the final environmental impact statement on the construction... 10 Energy 2 2010-01-01 2010-01-01 false Postconstruction environmental impact statements. 51.95... Implementing Section 102(2) Final Environmental Impact Statements-Production and Utilization Facilities § 51.95...

  7. 77 FR 25165 - Environmental Impacts Statements; Notice of Availability

    Science.gov (United States)

    2012-04-27

    ... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-9002-7] Environmental Impacts Statements; Notice of....epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements filed 04/16/2012 through...-Specific Impacts Associated with the Plan of Operations, Sweetwater County, WY, Comment Period Ends: 06/11...

  8. 76 FR 53531 - Environmental Impact Statement: Hancock County, MS

    Science.gov (United States)

    2011-08-26

    ...)] Environmental Impact Statement: Hancock County, MS AGENCY: Federal Highway Administration (FHWA), Department Of... that an environmental impact statement will be prepared for a proposed highway project in Hancock... an Environmental Impact Statement (EIS) for the proposed widening and/or realignment of State Route...

  9. 77 FR 44234 - Environmental Impacts Statements; Notice of Availability

    Science.gov (United States)

    2012-07-27

    ... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-9004-2] Environmental Impacts Statements; Notice of....epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements Filed 07/16/2012 through... Analyze the Site-Specific Impacts Associated with the Plan of Operations, Sweetwater County, WY, Review...

  10. 78 FR 8964 - Environmental Impact and Related Procedures

    Science.gov (United States)

    2013-02-07

    ... Administration 49 CFR Part 622 [Docket No. FTA-2011-0056] RIN 2132-AB03 Environmental Impact and Related... an environmental impact statement. DATES: Effective on February 7, 2013. FOR FURTHER INFORMATION... the list of project types that normally result in the preparation of an Environmental Impact Statement...

  11. 77 FR 74479 - Environmental Impacts Statements; Notice of Availability

    Science.gov (United States)

    2012-12-14

    ... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-9006-5] Environmental Impacts Statements; Notice of....epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements Filed 12/03/2012 Through... Transit Project, Construction-Related Potential Impacts on Business Revenue, St. Paul and Twin Cities...

  12. 16 CFR 1.85 - Final environmental impact statements.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Final environmental impact statements. 1.85... Final environmental impact statements. (a) After the close of the comment period, the Bureau responsible for the matter will consider the comments received on the draft environmental impact statement and...

  13. 77 FR 59875 - Environmental Impact and Related Procedures

    Science.gov (United States)

    2012-10-01

    ... repair project that do not typically involve significant environmental impacts. Specifically, the FHWA... damaged facility to address concerns such as safety and environmental impacts. The agencies also seek... kinds of projects and activities described in this paragraph and the environmental impacts of such...

  14. 39 CFR 775.11 - Environmental impact statements.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Environmental impact statements. 775.11 Section... POLICY ACT PROCEDURES § 775.11 Environmental impact statements. (a) Determining scope. Before an environmental impact statement is prepared, the following procedures must be followed to determine what issues...

  15. 77 FR 55213 - Environmental Impacts Statements; Notice of Availability

    Science.gov (United States)

    2012-09-07

    ... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-9004-9] Environmental Impacts Statements; Notice of....epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements Filed 08/27/2012 through... Conditions by Reducing Road-Related Impacts to Wildlife, Fish, Soil, and Water Resources and Restoration of...

  16. 76 FR 13017 - Environmental Impact Statement: Los Angeles County, CA

    Science.gov (United States)

    2011-03-09

    ... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Environmental Impact Statement: Los... to advise the public that a Draft Environmental Impact Statement will be prepared for a proposed... prepare a Draft Environmental Impact Statement on a proposal for the State Route 710 Gap North Closure...

  17. 40 CFR 124.61 - Final environmental impact statement.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Final environmental impact statement... environmental impact statement. No final NPDES permit for a new source shall be issued until at least 30 days after the date of issuance of a final environmental impact statement if one is required under 40 CFR 6...

  18. The environmental impacts of wind and water power

    International Nuclear Information System (INIS)

    Twidell, J.W.

    1994-01-01

    The success of a typical renewable energy project depends about 40% on technology and about 60% on institutional factors. The latter include regulations, financing and environmental impact, with many of the regulations and some financial factors themselves relating to environmental impact. This paper attempts to define and categorize aspects of environmental impact, especially regarding wind and hydro power projects. (author)

  19. 77 FR 20690 - Environmental Impact Statement: Albuquerque, New Mexico

    Science.gov (United States)

    2012-04-05

    ... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Environmental Impact Statement.... SUMMARY: The FHWA is rescinding the notice of intent to prepare an environmental impact statement for the... rescinding the Notice of Intent to prepare an Environmental Impact Statement (EIS) for the proposed...

  20. Statistical analysis of environmental data

    International Nuclear Information System (INIS)

    Beauchamp, J.J.; Bowman, K.O.; Miller, F.L. Jr.

    1975-10-01

    This report summarizes the analyses of data obtained by the Radiological Hygiene Branch of the Tennessee Valley Authority from samples taken around the Browns Ferry Nuclear Plant located in Northern Alabama. The data collection was begun in 1968 and a wide variety of types of samples have been gathered on a regular basis. The statistical analysis of environmental data involving very low-levels of radioactivity is discussed. Applications of computer calculations for data processing are described

  1. Analysis of the impact of environmental and social factors, with a particular emphasis on education, on the level of metabolic control in type 1 diabetes in children.

    Science.gov (United States)

    Stefanowicz, Anna; Birkholz, Dorota; Myśliwiec, Małgorzata; Niedźwiecki, Maciej; Owczuk, Radosław; Balcerska, Anna

    2012-01-01

    Type 1 diabetes is a chronic, incurable childhood disease. Chronically uncontrolled diabetes is associated with eye, kidney, nerve, heart and blood vessel damage and function impairment. The aim of this study was to evaluate the impact of various social and environmental factors, with a particular emphasis on education, on the level of metabolic control in diabetes. The survey research was conducted in 102 children aged 0-18 years, diagnosed with type 1 diabetes. Based on the HbA(1c ) level, patients were divided into: group A (63 patients with fairly well and moderately controlled type 1 diabetes mellitus) and group B (39 patients with metabolically uncontrolled type 1 diabetes mellitus). The impact of various environmental and social factors on the degree of metabolic control of type 1 diabetes was analysed. No effect of typical environmental and social factors, such as: place of residence, gender, parents' education and their professional activity, on the level of metabolic control of type 1 diabetes was found. However, groups A and B significantly differed in the level of knowledge about diabetes and its treatment, in the regularity of meals, in possessing a nutrition scale and in the self-assessed preparation for taking care and custody of a child with type 1 diabetes. 1. Children with type 1 diabetes and their parents require ongoing education about the disease and its treatment. 2. The regularity of meals and the use of a nutrition scale have considerable impact on the level of metabolic control of the disease.

  2. Environmental impact of solution mining for uranium

    International Nuclear Information System (INIS)

    Hunkin, G.G.

    1975-01-01

    Compared with most other mining systems, uranium solution mining has a negligible effect on such environmental factors as surface disturbance, interference with natural groundwater quality and distribution, and aerial discharge of radionuclides. The following topics are discussed: the process, personnel safety and health, tailings disposal, impact on groundwater, operating licenses and controls, legislation, and economics. It is concluded that engineered well systems and controlled input/production flow rates, combined with full recirculation systems that maintain constant fluid volumes in the mineralized formations, result in containment of leach solutions within the operating area. The very dilute leach solutions, compatible with natural groundwaters, ensure that no environmental damage results, even if a loss of control occurred. Reduction in the number of processing steps and virtual elimination of operator hazards, waste disposal and land rehabilitation costs help in reducing overall costs

  3. Environmental impact assessment: Retrospect and prospect

    International Nuclear Information System (INIS)

    Jay, Stephen; Jones, Carys; Slinn, Paul; Wood, Christopher

    2007-01-01

    The widespread experience of environmental impact assessment (EIA) as an anticipatory environmental management tool has generated a considerable debate over the extent to which it is achieving its purposes. This has been measured in terms of EIA 'effectiveness', especially as discussion has moved away from issues of procedural implementation, to the more substantive goals of EIA and its place within broader decision-making contexts. Empirical studies have revealed the relatively weak degree of influence on planning decisions that is being exerted by EIA, which is increasingly being attributed to its rationalist beginnings. This article seeks to direct this debate towards the founding political purposes of EIA which, it is argued, provide a neglected, yet strong, basis for EIA reform. A number of illustrative suggestions are made as a result of this redirection, to enable EIA to adopt a more determinative role in decision making and to contribute to more sustainable patterns of development planning

  4. Citizens' actions and environmental impact statements

    International Nuclear Information System (INIS)

    Waelde, T.

    1975-01-01

    Above all, two kinds of citizens' participation in environmental decisions are to be considered: on the one hand the suit for damages and compensation for the purpose of internalization of external effects, and on the other hand the actions with the aim to influence character and content of public final decision cases. This is where cooperation and contributions towards state activities with more concern for the environment come into it. This sphere is investigated. Combined are the possibility of judicially arranged citizens' participation and a modern instrument of public decision: environmental impact statements. At the moment these appear to become exclusively an instrument for internal administration management. However, it is possible - this can be confirmed in comparative law - to couple this for the purpose of administration created instrument of technology assessment with citizens' actions. Therefore, the article aims to point to a solution how modern administration management through judicial mediation can orientate itself according to citizens' interests. (orig./LN) [de

  5. Telephone Flat Geothermal Development Project Environmental Impact Statement Environmental Impact Report. Final

    Energy Technology Data Exchange (ETDEWEB)

    None

    1999-02-01

    This Final Environmental Impact Statement and Environmental Impact Report (Final EIS/EIR) has been prepared to meet the requirements of the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA). The Proposed Action includes the construction, operation, and decommissioning of a 48 megawatt (gross) geothermal power plant with ancillary facilities (10-12 production well pads and 3-5 injection well pads, production and injection pipelines), access roads, and a 230-kilovolt (kV) transmission line in the Modoc National Forest in Siskiyou County, California. Alternative locations for the power plant site within a reasonable distance of the middle of the wellfield were determined to be technically feasible. Three power plant site alternatives are evaluated in the Final EIS/EIR.

  6. Comparative economic evaluation of environmental impact of different cogeneration technologies

    International Nuclear Information System (INIS)

    Patrascu, Roxana; Athanasovici, Victor; Raducanu, Cristian; Minciuc, Eduard; Bitir-Istrate, Ioan

    2004-01-01

    Cogeneration is one of the most powerful technologies for reduction of environmental pollution along with renewable energies. At the Kyoto Conference cogeneration has been identified as being the most important measure for reducing emissions of greenhouse effect gases. It has also been mentioned that cogeneration has a potential of reducing pollution with about 180 million tones per year. In order to promote new cogeneration technologies and evaluate the existing ones it is necessary to know and to be able to quantify in economical terms the environmental issues. When comparing different cogeneration technologies: steam turbine (TA), gas turbine (TG), internal combustion engine (MT), in order to choose the best one, the final decision implies an economic factor, which is even more important if it includes the environmental issues. The environmental impact of different cogeneration technologies is quantified using different criteria: depletion of non-renewable natural resources, eutrofisation, greenhouse effect, acidification etc. Environmental analysis using these criteria can be made using the 'impact with impact' methodology or the global one. The results of such an analysis cannot be quantified economically directly. Therefore there is a need of internalisation of ecological effects within the costs of produced energy: electricity and heat. In the energy production sector the externalizations represent the indirect effects on the environment. They can be materialised within different types of environmental impact: - Different buildings of mines, power plants etc; - Fuel losses during transportation and processing; - Effect of emissions in the air, water and soil. Introduction of the environmental impact costs in the energy price is called internalisation and it can be made using the direct and indirect methods. The paper discusses aspects regarding the emissions of cogeneration systems, the eco-taxes - method of 'internalisation' of environmental

  7. Managing environmental and health impacts of uranium mining

    Energy Technology Data Exchange (ETDEWEB)

    Vance, R.E.; Cameron, R., E-mail: robert.vance@oecd.org, E-mail: ron.cameron@oecd.org [OECD Nuclear Energy Agency (France)

    2014-07-01

    As the raw material that fuels nuclear power plants that generate significant amounts of electricity with full life cycle carbon emissions as low as renewable energy sources, uranium is a valuable commodity. Yet uranium mining remains controversial, principally because of environmental and health impacts created when mining was undertaken by governments to meet Cold War strategic requirements. Uranium mining is conducted under significantly different circumstances today. Since the era of military production, societal expectations of environmental protection and the safety of workers and the public have evolved as the outcomes of the early era of mining became apparent, driving changes in regulatory oversight and mining practices. Key aspects of leading practice uranium mining are presented (conventional worker health and safety, worker radiation protection, public health and safety, water quality, tailings and waste rock management) and compared with historic practices to demonstrate the scale of differences. The application of additional aspects of uranium mine life cycle management (public consultation, environmental impact assessment, analysis of socio-economic impacts/benefits, environmental monitoring, financial assurance, product transport, security and safeguards, emergency planning and knowledge transfer), introduced as the industry matured, enhance overall management practices for the long term. Results from several case studies show that improved management of key aspects of uranium mining, combined with the incorporation of new life cycle parameters, have transformed the industry into the most regulated and arguably one of the safest and environmentally responsible types of mining in the world. (author)

  8. Environmental impact and benefit from hydro-energy: Bulgarian case

    International Nuclear Information System (INIS)

    Vesselinov, V.; Iotova, A.

    1996-01-01

    The present hydro energy system in Bulgaria has been constructed mainly in the period 1950-1965. The currently utilized hydro-power potential, only 33% of the estimated technical potential, includes 87 HPP operating in 1991. A complex assessment of the environmental impact of the hydro energy objects as well as a comparative analysis of all energy sources in Bulgaria is made in the framework of Bulgarian Case Study of the DECADES Inter-Agency Project. The main types of environmental impact related to HPP operation are presented in 7 specific categories: land requirements, changes in the landscape, hydrological changes, micro-climatic changes, geodynamic changes, risk from man-made activities; generation of new ecosystems. A technique of expertise in ball is proposed as a suitable quantitative approach for more precise assessment of impact on climate factors from different energy sources. 2 tabs., 5 refs

  9. Environmental impact due to nuclear power plants

    International Nuclear Information System (INIS)

    Kellermann, O.; Balfanz, H.P.

    1975-01-01

    The environmental impact due to nuclear power plants is smaller than that due to fossil-fired power plants. The risks of the nuclear power plant operation are determined by the quantity and the probability of the release of radioactive materials. According to the value, the risks of normal operation can be compared to the accident risks. An attempt should be made to effectively reduce the remaining risk at unfavourable sites with the emphasis on accidents with larger effects than design basis accidents. (orig./LH) [de

  10. Environmental impact of nuclear power stations

    International Nuclear Information System (INIS)

    Kellermann, O.; Balfanz, H.P.

    1975-01-01

    Following a comparative consideration of the present and future environmental impact by coal, oil, and nuclear power plants, the special risks connected with the use of the latter are dealt with. A distinction is made in considering the risk between public exposure, in the environment of a plant due to operational leakage and radiation exposure in the plant under normal operation and in the case of an accident. The accident risk consideration is the basis of the Rasmussen study where the different containment construction of german plants as well as the higher population density for sites in the FRG are considered. Evaluation parameters are given to quantify the risks and using this, the risks of various cases of impact of nuclear power plants are compared. The comparison shows that the risks of nuclear power plant operation according to the value in normal operation are comparable to those in the case of an accident. (ORU/LH) [de

  11. Techno-Economic, Sustainability & Environmental Impact Diagnosis (TESED) Framework

    DEFF Research Database (Denmark)

    Loureiro da Costa Lira Gargalo, Carina; Carvalho, Ana; Matos, Henrique A.

    2014-01-01

    that truly sustainable design alternatives can befound.This work proposes a framework,called ‘Techno-Economic Sustainability Environmental Impact Diagnosis’ (TESED) that allows users to assess chemical/biochemical processes in a product oriented analysis.TESED is asystematic and generic approach that can......Nowadays, companies are looking for new sustainable design alternatives that improve their original processes.To assesst he best designalternative, economic aspects have been the preferred indicators. However, environmental and social concerns should also be included in the decision process so...

  12. 76 FR 58833 - Notice of Availability of the Draft Environmental Impact Statement/Environmental Impact Report...

    Science.gov (United States)

    2011-09-22

    ...The Department of the Interior and the California Department of Fish and Game have prepared a draft environmental impact statement and environmental impact report (EIS/EIR) evaluating the effects of removing four dams on the Klamath River in southern Oregon and northern California. These documents are one part of the total record that will inform the decision of the Secretary of the Interior on whether removing the dams will advance restoration of the fisheries of the Klamath River Basin and will be in the public interest.

  13. 78 FR 14117 - Draft Environmental Impact Statement/Environmental Impact Report for Yolo Bypass Salmonid Habitat...

    Science.gov (United States)

    2013-03-04

    ...The Bureau of Reclamation and California Department of Water Resources intend to prepare an environmental impact statement/ environmental impact report (EIS/EIR) for the implementation of actions I.6.1 and I.7 identified in the National Marine Fisheries Service's 2009 Biological Opinion and Conference Opinion on the Long-term Operation of the Central Valley Project and State Water Project Reasonable and Prudent Alternative. These actions consist of salmonid habitat restoration efforts within the lower Sacramento River basin and fish passage through the Yolo Bypass. We are seeking suggestions and information on the alternatives and topics to be addressed and any other important issues related to the proposed action.

  14. Columbia River System Operation Review : Final Environmental Impact Statement, Appendix O: Economic and Social Impact.

    Energy Technology Data Exchange (ETDEWEB)

    Columbia River System Operation Review (U.S.)

    1995-11-01

    This Appendix O of the Final Environmental Impact Statement for the Columbia River System measures the economic and social effects of the alternative system operation strategies and includes both geographic and methodology components. Areas discussed in detail include the following: purpose, scope and process; an economic history of the Columbia River Basin and its use today including the Columbia River and Socio-economic development in the Northwest and Major uses of the River System; Analysis procedures and methodologies including national economic evaluation, the concepts, analysis of assumptions, analysis for specific river uses, water quality, Regional evaluation, analysis, and social impacts; alternatives and impacts including implementation costs, andromous fish, resident fish and wildlife, flood control, irrigation and municipal and industrial water supply, navigation impacts, power, recreation, annual costs, regional economic analysis. Extensive comparison of alternatives is included.

  15. Columbia River system operation review: Final environmental impact statement. Appendix O, economic and social impact

    International Nuclear Information System (INIS)

    1995-11-01

    This Appendix O of the Final Environmental Impact Statement for the Columbia River System measures the economic and social effects of the alternative system operation strategies and includes both geographic and methodology components. Areas discussed in detail include the following: purpose, scope and process; an economic history of the Columbia River Basin and its use today including the Columbia River and Socio-economic development in the Northwest and Major uses of the River System; Analysis procedures and methodologies including national economic evaluation, the concepts, analysis of assumptions, analysis for specific river uses, water quality, Regional evaluation, analysis, and social impacts; alternatives and impacts including implementation costs, andromous fish, resident fish and wildlife, flood control, irrigation and municipal and industrial water supply, navigation impacts, power, recreation, annual costs, regional economic analysis. Extensive comparison of alternatives is included

  16. Assessment of Environmental Impacts of Limestone Quarrying Operations in Thailand

    Directory of Open Access Journals (Sweden)

    Kittipongvises Suthirat

    2017-11-01

    Full Text Available Environmental impacts of the mineral extraction have been a public concern. Presently, there is widespread global interest in the area of mining and its sustainability that focused on the need to shift mining industry to a more sustainable framework. The aim of this study was to systematically assess all possible environmental and climate change related impacts of the limestone quarrying operation in Thailand. By considering the life cycle assessment method, the production processes were divided into three phases: raw material extraction, transportation, and comminution. Both IMPACT 2002+ and the Greenhouse Gas Protocol methods were used. Results of IMPACT 2002+ analysis showed that per 1 ton crushed limestone rock production, the total depletion of resource and GHGs emissions were 79.6 MJ and 2.76 kg CO2 eq., respectively. Regarding to the four damage categories, ‘resources’ and ‘climate change’ categories were the two greatest environmental impacts of the limestone rock production. Diesel fuel and electricity consumption in the mining processes were the main causes of those impacts. For climate change, the unit of CO2 eq. was expressed to quantify the total GHGs emissions. Estimated result was about 3.13 kg CO2 eq. per ton limestone rock product. The results obtained by the Greenhouse Gas Protocol were also similar to IMPACT 2002+ method. Electrical energy consumption was considered as the main driver of GHGs, accounting for approximately 46.8 % of total fossil fuel CO2 emissions. A final point should be noted that data uncertainties in environmental assessment over the complete life cycle of limestone quarrying operation have to be carefully considered.

  17. Assessment of Environmental Impacts of Limestone Quarrying Operations in Thailand

    Science.gov (United States)

    Kittipongvises, Suthirat

    2017-11-01

    Environmental impacts of the mineral extraction have been a public concern. Presently, there is widespread global interest in the area of mining and its sustainability that focused on the need to shift mining industry to a more sustainable framework. The aim of this study was to systematically assess all possible environmental and climate change related impacts of the limestone quarrying operation in Thailand. By considering the life cycle assessment method, the production processes were divided into three phases: raw material extraction, transportation, and comminution. Both IMPACT 2002+ and the Greenhouse Gas Protocol methods were used. Results of IMPACT 2002+ analysis showed that per 1 ton crushed limestone rock production, the total depletion of resource and GHGs emissions were 79.6 MJ and 2.76 kg CO2 eq., respectively. Regarding to the four damage categories, `resources' and `climate change' categories were the two greatest environmental impacts of the limestone rock production. Diesel fuel and electricity consumption in the mining processes were the main causes of those impacts. For climate change, the unit of CO2 eq. was expressed to quantify the total GHGs emissions. Estimated result was about 3.13 kg CO2 eq. per ton limestone rock product. The results obtained by the Greenhouse Gas Protocol were also similar to IMPACT 2002+ method. Electrical energy consumption was considered as the main driver of GHGs, accounting for approximately 46.8 % of total fossil fuel CO2 emissions. A final point should be noted that data uncertainties in environmental assessment over the complete life cycle of limestone quarrying operation have to be carefully considered.

  18. Final environmental impact statement: US Spent Fuel Policy. Executive summary

    International Nuclear Information System (INIS)

    1980-05-01

    The analysis of the environmental impacts for storage of domestic fuel shows that the impacts for the full range of alternatives considered are relatively small compared with available resources or background exposure of the population from natural radiation sources. The differences in impacts of storage of domestic fuel are attributed to the amount of fuel stored in Independent Spent Fuel Storage (ISFS) facilities, the storage time, and, to a lesser degree, the differences in spent fuel transportation. The differences between comparable alternatives of implementing the policy or not implementing the policy are small. The difference in impacts of storage of foreign fuel are attributed to the amount of fuel received under the policy and to the disposition mode analyzed. The impact of storage of foreign fuel (a small fraction of the amount of domestic fuel considered) is also small. As a result of the small differences in environmental impacts of all cases considered for foreign fuel, environmental impacts probably will not strongly influence the selection of the case that best meets US nonproliferation goals. Proliferation benefits of the various cases analyzed vary significantly. The structure and level of fee charged for storage of spent fuel will affect the degree of participation in the spent fuel storage program by utilities. However, the range of participation is within the range of alternatives analyzed in the draft EISs on storage of US and foreign fuels, for which the environmental effects were found to be relatively small. The fee computed on the basis of full recovery of government costs should not significantly affect the cost of generating nuclear power

  19. Environmental impact assessment of abnormal events: a follow-up study

    International Nuclear Information System (INIS)

    Hunsaker, D.B. Jr.; Lee, D.W.

    1985-01-01

    Impact analyses included in environmental assessments for a selected nuclear power plant, petroleum storage facility, crude oil pipeline, and geopressure well that have experienced operational, abnormal events are compared with the data quantifying the environmental impacts of the events. Comparisons of predicted vs actual impacts suggests that prediction of the types of events and associated impacts could be improved; in some instances, impacts have been underestimated. Analysis of abnormal events is especially important in environmental assessment documents addressing a technology that is novel or unique to a particular area. Incorporation of abnormal event impact analysis into project environmental monitoring and emergency response plans can help improve these plans and can help reduce the magnitude of environmental impacts resulting from said events

  20. Environmental impact assessment of genetically modified biocontrol agents

    International Nuclear Information System (INIS)

    Migheli, Q.

    2001-01-01

    This review summarises the theoretical basis of risk analysis, and the political and social implications of introducing new biotechnology products in agricultural environments. The main factors to be considered under the present European regulation in the environmental impact assessment of genetically modified biocontrol agents are briefly discussed. Finally, an alternative risk assessment paradigm is proposed for genetically modified microorganisms, which shall consider the intrinsic properties of each antagonist, rather than the method used for generating it [it