WorldWideScience

Sample records for environmental goals productivity

  1. The relation between product innovation and strategic environmental goals

    DEFF Research Database (Denmark)

    Gerstlberger, Wolfgang; Pedrosa, Alex; Atlason, Reynir Smari

    2017-01-01

    Innovation management in manufacturing firms including its environmental dimension is currently on top of the political agenda of the European Union. Existing studies only provide limited findings in this research field. By using cross-sectional data, this study investigates firms’ internal capab...... Policies (IPPs). IPPs combine the support of product innovations in general and environmental innovations in particular. Future research could apply mixed-method studies in single or multiple countries which combine different types of data....

  2. Reconciling irrigated food production with environmental flows for Sustainable Development Goals implementation.

    Science.gov (United States)

    Jägermeyr, Jonas; Pastor, Amandine; Biemans, Hester; Gerten, Dieter

    2017-07-19

    Safeguarding river ecosystems is a precondition for attaining the UN Sustainable Development Goals (SDGs) related to water and the environment, while rigid implementation of such policies may hamper achievement of food security. River ecosystems provide life-supporting functions that depend on maintaining environmental flow requirements (EFRs). Here we establish gridded process-based estimates of EFRs and their violation through human water withdrawals. Results indicate that 41% of current global irrigation water use (997 km 3 per year) occurs at the expense of EFRs. If these volumes were to be reallocated to the ecosystems, half of globally irrigated cropland would face production losses of ≥10%, with losses of ∼20-30% of total country production especially in Central and South Asia. However, we explicitly show that improvement of irrigation practices can widely compensate for such losses on a sustainable basis. Integration with rainwater management can even achieve a 10% global net gain. Such management interventions are highlighted to act as a pivotal target in supporting the implementation of the ambitious and seemingly conflicting SDG agenda.

  3. Reconciling irrigated food production with environmental flows for Sustainable Development Goals implementation

    Science.gov (United States)

    Jägermeyr, Jonas; Pastor, Amandine; Biemans, Hester; Gerten, Dieter

    2017-07-01

    Safeguarding river ecosystems is a precondition for attaining the UN Sustainable Development Goals (SDGs) related to water and the environment, while rigid implementation of such policies may hamper achievement of food security. River ecosystems provide life-supporting functions that depend on maintaining environmental flow requirements (EFRs). Here we establish gridded process-based estimates of EFRs and their violation through human water withdrawals. Results indicate that 41% of current global irrigation water use (997 km3 per year) occurs at the expense of EFRs. If these volumes were to be reallocated to the ecosystems, half of globally irrigated cropland would face production losses of >=10%, with losses of ~20-30% of total country production especially in Central and South Asia. However, we explicitly show that improvement of irrigation practices can widely compensate for such losses on a sustainable basis. Integration with rainwater management can even achieve a 10% global net gain. Such management interventions are highlighted to act as a pivotal target in supporting the implementation of the ambitious and seemingly conflicting SDG agenda.

  4. Strategies for reconciling environmental goals, productivity improvement, and increased energy efficiency in the industrial sector: Analytic framework

    Energy Technology Data Exchange (ETDEWEB)

    Boyd, G.A.

    1995-06-01

    The project is motivated by recommendations that were made by industry in a number of different forums: the Industry Workshop of the White House Conference on Climate Change, and more recently, industry consultations for EPAct Section 131(c) and Section 160(b). These recommendations were related to reconciling conflicts in environmental goals, productivity improvements and increased energy efficiency in the industrial sector.

  5. Goal Theory and Individual Productivity.

    Science.gov (United States)

    Frost, Peter J.

    The paper provides a review of goal theory as articulated by Edwin Locke. The theory is evaluated in terms of laboratory and field research and its practical usefulnes is explored as a means to improving individual productivity in "real world" organizations Research findings provide support for some goal theory propositions but suggest also the…

  6. Environmental budget and policy goal

    Energy Technology Data Exchange (ETDEWEB)

    Noh, Sang Hwan [Korea Environment Institute, Seoul (Korea)

    1998-12-01

    The assigned budget for environmental sector is quite insufficient to meet enormous environmental demand. Under this circumstance, there is only one way to solve environmental problems efficiently, i.e. to use a given budget efficiently. Therefore, the study on efficient utilization of a given environmental invested finance is needed by customizing a diagnosis of present condition on the operation of environmental budget and environmental investment analysis. In this respect, an entire national budget of 1999 and environmental budget were analyzed in this study. By analyzing economic efficiency of sewage disposal program, integrated septic tank system, VOC regulation, incinerator construction program, food waste disposal program, and recycling program, an efficient budget policy was presented. 19 refs., 18 figs., 169 tabs.

  7. The interrelationship between environmental goals, productivity improvement, and increased energy efficiency in integrated paper and steel plants

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    This report presents the results of an investigation into the interrelationships between plant-level productivity, energy efficiency, and environmental improvements for integrated pulp and paper mills and integrated steel mills in the US. Integrated paper and steel plants are defined as those facilities that use some form of onsite raw material to produce final products (for example, paper and paperboard or finished steel). Fully integrated pulp and paper mills produce onsite the pulp used to manufacture paper from virgin wood fiber, secondary fiber, or nonwood fiber. Fully integrated steel mills process steel from coal, iron ore, and scrap inputs and have onsite coke oven facilities.

  8. Environmental products

    International Nuclear Information System (INIS)

    1995-12-01

    This volume in the series of directories of Quebec organizations doing research and development involving biomass-based products or processes focused on environmental products and services. The objective of this, and other directories in the series, was to stimulate interaction, and hence more aggressive development, of products and processes capable of being commercialized, to facilitate interaction between those who possess and those who could utilize biomass resources, and in general, to encourage the development of biomass-based industries. A total of 83 organizations were included in standardized format, describing areas of research interest, principal areas of technological expertise, major equipment, personnel and name and address of contact person. In this volume fields of research interest included environmental audits, waste treatment, biodegradation, composting, oxidation, photodegradation, disinfection and combustion. tabs

  9. Goals and Principles of Environmental Policy

    International Nuclear Information System (INIS)

    Zylicz, T.

    2010-01-01

    This paper looks at how contemporary environmental (including climate) policy problems are phrased in terms of effectiveness, efficiency, and equity. The latter three concepts have served as foci of theoretical discussions among economists who analyse these issues and identify criteria that determine relevant regulations and programmes adopted by governments. The paper starts with a discussion of Pigouvian taxation as model instrument used in order to solve policy problems. It analyses to what extent and under what circumstances alternative instruments - such as marketable pollution permits - can achieve environmental and climate goals while serving other purposes too. Coase theorem is used as a reference for discussing what government interventions are indeed indispensable to achieve both explicit and tacit policy goals. Popular principles and practically applied 'rules of thumb' - such as the Polluter Pays Principle - are then reviewed. The next part is devoted to examining market structures as they influence environmental outcomes of economic activities. This is followed by a discussion of Environmental Tax Reforms which seems to inspire much of the economic thinking about contemporary policies. An outlook for the 21st century concludes the paper.

  10. Cattle breeding goals and production circumstances

    NARCIS (Netherlands)

    Groen, A.F.

    1989-01-01

    This thesis gives the results of a study on the relationship between cattle breeding goals and production circumstances. The relationship between breeding goals and production circumstances mostly arises from the influences of production circumstances on the economic values of

  11. Protection goals in environmental risk assessment: a practical approach.

    Science.gov (United States)

    Garcia-Alonso, Monica; Raybould, Alan

    2014-12-01

    Policy protection goals are set up in most countries to minimise harm to the environment, humans and animals caused by human activities. Decisions on whether to approve new agricultural products, like pesticides or genetically modified (GM) crops, take into account these policy protection goals. To support decision-making, applications for approval of commercial uses of GM crops usually comprise an environmental risk assessment (ERA). These risk assessments are analytical tools, based on science, that follow a conceptual model that includes a problem formulation step where policy protection goals are considered. However, in most countries, risk assessors face major problems in that policy protection goals set in the legislation are stated in very broad terms and are too ambiguous to be directly applicable in ERAs. This means that risk assessors often have to interpret policy protection goals without clear guidance on what effects would be considered harmful. In this paper we propose a practical approach that may help risk assessors to translate policy protection goals into unambiguous (i.e., operational) protection goals and to establish relevant assessment endpoints and risk hypotheses that can be used in ERAs. Examples are provided to show how this approach can be applied to two areas of environmental concern relevant to the ERAs of GM crops.

  12. Linking quality goals and product development competences

    DEFF Research Database (Denmark)

    Olsen, Johanne Rønnow; Harmsen, Hanne; Friis, Alan

    2008-01-01

    Quality is a main determinant of consumer food choice. Product development is accordingly a key activity for companies, because it generates the products on the quality of which consumer choices are based. In this respect, product development managers have a focal role, as their personal quality......, including reversed laddering sessions with 18 product development managers. Discrepancies between managerial and consumer quality goals are uncovered. Furthermore, the results point to two general dilemmas faced by product development managers in relation to quality; an external stakeholder dilemma...... orientation influence the way product development is performed. The aim of this paper is to investigate managerial quality goals and how these may be linked to product development competences, which has not previously been studied. The study draws on an empirical, qualitative study in the Danish food industry...

  13. Normative, gain and hedonic goal frames guiding environmental behavior

    OpenAIRE

    Lindenberg, Siegwart; Steg, Linda

    2007-01-01

    This article discusses new developments about goal-dependent framing and multiple goal frames (sometimes also called "multiple motives"), which are highly relevant for understanding environmental behavior. We introduce goal-framing theory, which postulates that goals "frame" the way people process information and act upon it. Three goal frames are distinguished: a hedonic, gain, and normative goal frame. In general, multiple goals are active at any given time, which may (or may not) be compat...

  14. Are We Meeting the Goal of Responsible Environmental Behavior: An Examination of Nature and Environmental Education Center Goals.

    Science.gov (United States)

    Simmons, Deborah A.

    1991-01-01

    Through two surveys of nature and environmental centers throughout the United States, the author compares the centers' expressed goals with the goals of environmental education. These goals were determined by an accepted behavior model that is considered conducive to environmentally responsible behavior. (17 references) (MCO)

  15. Normative, gain and hedonic goal frames guiding environmental behavior

    NARCIS (Netherlands)

    Lindenberg, Siegwart; Steg, Linda

    2007-01-01

    This article discusses new developments about goal-dependent framing and multiple goal frames (sometimes also called "multiple motives"), which are highly relevant for understanding environmental behavior. We introduce goal-framing theory, which postulates that goals "frame" the way people process

  16. Compatible Goals: Defense and Environmental Protection

    Science.gov (United States)

    1984-03-22

    Remedial Action Site. AD-P004 146 Treatment of Wastewater (Red Water ) Resulti g from TNT Trinitrotoluene) Purification. AD-P004 147 Location of Volatile... Availabilit C040e3 _Vafl" -,ior OEC 5 1984 Ths document has been appeoved Dist Spool.A distribution.Is unlimiedL..... .. . COMFATABLE GOALS : DEFENSE AND...surface water to the same good biological quality as the water entering the installation. 4. Conserve fossil fuel energy to the highest degree possi

  17. Defensive Jurisprudence and Productivity Goals: Jabuticaba Consumerist

    Directory of Open Access Journals (Sweden)

    Miguel Luiz Barros Barreto de Oliveira

    2016-10-01

    Full Text Available This paper analyzes the application of so-called procedural defensive jurisprudence that values exacerbated rationalization of the judiciary activities, preventing the processing of judicial review in the higher courts, and its consequences in consumeristas indemnity processes. It analyzes the pressure to which judges are subjected, especially because of the need to comply with productivity goals. The construction work suggests the misconception of these imposed judicial policies to decrease the procedural stock since that attack the problem on screen superficially and do not solve the basic question.

  18. Effects of incorporating environmental cost and risk aversion on economic values of pig breeding goal traits.

    Science.gov (United States)

    Ali, B M; de Mey, Y; Bastiaansen, J W M; Oude Lansink, A G J M

    2018-06-01

    Economic values (EVs) of traits, accounting for environmental impacts and risk preferences of farmers, are required to design breeding goals that contribute to both economic and environmental sustainability. The objective of this study was to assess the effects of incorporating environmental costs and the risk preferences of farmers on the EVs of pig breeding goal traits. A breeding goal consisting of both sow efficiency and production traits was defined for a typical Brazilian farrow-to-finish pig farm with 1,500 productive sows. A mean-variance utility function was employed for deriving the EVs at finishing pig level assuming fixed slaughter weight. The inclusion of risk and risk aversion reduces the economic weights of sow efficiency traits (17%) while increasing the importance of production traits (7%). For a risk-neutral producer, inclusion of environmental cost reduces the economic importance of sow efficiency traits (3%) while increasing the importance of production traits (1%). Genetic changes of breeding goal traits by their genetic standard deviations reduce emissions of greenhouse gases, and excretions of nitrogen and phosphorus per finished pig by up to 6% while increasing farm profit. The estimated EVs could be used to improve selection criteria and thereby contribute to the sustainability of pig production systems. © 2018 The Authors. Journal of Animal Breeding and Genetics published by Blackwell Verlag GmbH.

  19. Voluntary agreement for the new energy and environmental policies goals

    International Nuclear Information System (INIS)

    Pesaro, G.

    1998-01-01

    In the field of public policies innovative instruments based on market mechanisms and voluntary action by economical subjects meet a growing favour. This emerges also from the proceedings of the recent National Conference on Energy and the Environment, held in Rome in November 1998. From a planning policy, directly implemented by public bodies and often characterised by a strong rigidity, we are now passing to a new policy style, based on main trends and principles and implemented, at least in a priority way, through a mechanism of pacts and agreements among a variety of actors. This article, starting from an introduction on the nature and the functioning limits of voluntary agreements and, on these bases, presents some hypothesis on the ways and the necessary conditions to develop a concrete system of voluntary agreements in the country, in order to reach the new energy and environmental policies goals [it

  20. Alignment of Software Product Quality Goals in Two Outsourcing Relationships

    OpenAIRE

    Barney, Sebastian; Wohlin, Claes

    2010-01-01

    Background: Issues with software product quality are commonly reported when organisations engage in outsourcing relationships. To address this issue, value-based software engineering literature emphasises the need for all success-critical stakeholder groups to work towards a mutually agreed goal. Aim: This paper presents a case study that aims to compare and contrast the priority two groups place on software product quality — stakeholders internal to the development organisation, and stakehol...

  1. Enhancing Productivity Through Feedback and Goal Setting. Final Report.

    Science.gov (United States)

    Pritchard, Robert D.; And Others

    A field test was conducted to research the effects of feedback and goal-setting techniques on increasing productivity. Subjects were regular employees of two autonomous clerical-type units in a credit card and payment processing center of a Southwestern oil company. The study desiqn had three phases--baseline period and two experimental conditions…

  2. Self-efficacy, personal goals, social comparison and scientific productivity.

    NARCIS (Netherlands)

    Vrugt, A.J.; Koenis, M.

    2002-01-01

    Investigated the extent to which perceived self-efficacy, personal goals, and upward comparison predict the scientific productivity of academic staff members. 123 academic staff employed at different Dutch universities answered written questions about their judgment of self-efficacy in the area of

  3. Green electronics manufacturing creating environmental sensible products

    CERN Document Server

    Wang, John X

    2012-01-01

    Going ""green"" is becoming a major component of the mission for electronics manufacturers worldwide. While this goal seems simplistic, it poses daunting dilemmas. Yet, to compete effectively in the global economy, manufacturers must take the initiative to drive this crucial movement. Green Electronics Manufacturing: Creating Environmental Sensible Products provides you with a complete reference to design, develop, build, and install an electronic product with special consideration for the product's environmental impacts during its whole life cycle. The author discusses how to integrate the st

  4. Biomass energy production in agriculture: A weighted goal programming analysis

    International Nuclear Information System (INIS)

    Ballarin, A.; Vecchiato, D.; Tempesta, T.; Marangon, F.; Troiano, S.

    2011-01-01

    Energy production from biomasses can be an important resource that, when combined with other green energies such as wind power and solar plants, can contribute to reduce dependency on fossil fuels. The aim of this study is to assess how agriculture could contribute to the production of bio-energy. A multi-period Weighted Goal Programming model (MpWGP) has been applied to identify the optimal land use combinations that simultaneously maximise farmers' income and biomass energy production under three concurrent constraints: water, labour and soil availability. Alternative scenarios are considered that take into account the effect of climate change and social change. The MpWGP model was tested with data from the Rovigo county area (Italy) over a 15-year time period. Our findings show that trade-off exists between the two optimisation targets considered. Although the optimisation of the first target requires traditional agricultural crops, which are characterised by high revenue and a low production of biomass energy, the latter would be achievable with intensive wood production, namely, high-energy production and low income. Our results also show the importance of the constraints imposed, particularly water availability; water scarcity has an overall negative effect and specifically affects the level of energy production. - Research Highlights: → The aim of this study is to assess how agriculture could contribute to the production of bio-energy. → A multi-period (15-year) Weighted Goal Programming model (MpWGP) has been applied. → We identify the optimal land use combinations that simultaneously maximise farmers' income and biomass energy production. → Three concurrent constraints have been considered: water, labour and soil availability.→ Water scarcity has an overall negative effect and specifically affects the level of energy production.

  5. An Investigation of the Goals for an Environmental Science Course: Teacher and Student Perspectives

    Science.gov (United States)

    Blatt, Erica N.

    2015-01-01

    This investigation uses an ethnographic case study approach to explore the benefits and challenges of including a variety of goals within a high school Environmental Science curriculum. The study focuses on environmental education (EE) goals established by the Belgrade Charter (1975), including developing students' environmental awareness and…

  6. Environmental Management in Product Chains

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Forman, Marianne

    2009-01-01

    between existing resources, norms and values and external pressures for environmental management (second section). A model for the types of corporate network relations that need to be mapped and understood in order to analyze and/or develop environmental management in a product chain (third section......The chapter aims at giving background to companies, consultants, governmental regulators, NGOs etc. for the analysis and planning of environmental management in specific product chains through: A framework for understanding environmental management in product chains as shaped by the interaction......). An overview of examples from our own research and from literature of the type and the role of environmental issues and initiatives in product chains (fourth section). A typology for characterizing corporate strategies as part of environmental management in product chains and characterizing those competencies...

  7. Canadian critical environmental zones: Concepts, goals and resources

    International Nuclear Information System (INIS)

    Meredith, T.C.; Moore, C.; Gartner, L.; Smith, W.

    1994-02-01

    Critical environmental zones are those ecosystems that are so degraded that the health or well-being of human inhabitants is threatened. A conceptual framework is presented for considering criticality and a rationale for a Canadian research project on critical zones. A model of pathways to criticality is outlined and some examples of environmental degradation in Canada are presented, including acid rain and greenhouse gas emissions. Societal response to, and public perception of, critical environmental zones is described. Media, format, and target audiences for output from a Canadian project are considered and some central scientific and policy questions are identified under such categories as environmental stresses, buffering capacity, indicators, human driving forces, and societal responses. An inventory of pertinent international and national activities is included. 53 refs., 8 figs., 3 tabs

  8. Assistive products and the Sustainable Development Goals (SDGs).

    Science.gov (United States)

    Tebbutt, Emma; Brodmann, Rebecca; Borg, Johan; MacLachlan, Malcolm; Khasnabis, Chapal; Horvath, Robert

    2016-11-29

    The Sustainable Development Goals (SDGs) have placed great emphasis on the need for much greater social inclusion, and on making deliberate efforts to reach marginalized groups. People with disabilities are often marginalized through their lack of access to a range of services and opportunities. Assistive products can help people overcome impairments and barriers enabling them to be active, participating and productive members of society. Assistive products are vital for people with disabilities, frailty and chronic illnesses; and for those with mental health problems, and gradual cognitive and physical decline characteristic of aging populations. This paper illustrates how the achievement of each of the 17 SDGs can be facilitated by the use of assistive products. Without promoting the availability of assistive products the SDGs cannot be achieved equitably. We highlight how assistive products can be considered as both a mediator and a moderator of SDG achievement. We also briefly describe how the Global Cooperation on Assistive Technology (GATE) is working to promote greater access to assistive products on a global scale.

  9. Streamlining environmental product declarations: a stage model

    Science.gov (United States)

    Lefebvre, Elisabeth; Lefebvre, Louis A.; Talbot, Stephane; Le Hen, Gael

    2001-02-01

    General public environmental awareness and education is increasing, therefore stimulating the demand for reliable, objective and comparable information about products' environmental performances. The recently published standard series ISO 14040 and ISO 14025 are normalizing the preparation of Environmental Product Declarations (EPDs) containing comprehensive information relevant to a product's environmental impact during its life cycle. So far, only a few environmentally leading manufacturing organizations have experimented the preparation of EPDs (mostly from Europe), demonstrating its great potential as a marketing weapon. However the preparation of EPDs is a complex process, requiring collection and analysis of massive amounts of information coming from disparate sources (suppliers, sub-contractors, etc.). In a foreseeable future, the streamlining of the EPD preparation process will require product manufacturers to adapt their information systems (ERP, MES, SCADA) in order to make them capable of gathering, and transmitting the appropriate environmental information. It also requires strong functional integration all along the product supply chain in order to ensure that all the information is made available in a standardized and timely manner. The goal of the present paper is two fold: first to propose a transitional model towards green supply chain management and EPD preparation; second to identify key technologies and methodologies allowing to streamline the EPD process and subsequently the transition toward sustainable product development

  10. Are clean technology and environmental quality conflicting policy goals?

    OpenAIRE

    Brechet, Thierry; Meunier, Guy; Institut National de la Recherche Agronomique UR 1303 Alimentation et Sciences Sociales

    2012-01-01

    In this paper we analyze the effects of an environmental policy on the diffusion of a clean technology in an economy where firms compete on the output market. We show that the share of adopting firms is non-monotonic with the stringency of the environmental policy, and that the adoption of the clean technology may well increase the pollution level. We also compare the effects of an emission tax and tradable pollution permits on welfare, technology adoption, and pollution level. We show that, ...

  11. Are Clean Technology and Environmental Quality Conflicting Policy Goals?

    OpenAIRE

    Thierry Brechet; Guy Meunier

    2012-01-01

    In this paper we analyze the effects of an environmental policy on the diffusion of a clean technology in an economy where firms compete on the output market. We show that the share of adopting firms is non-monotonic with the stringency of the environmental policy, and that the adoption of the clean technology may well increase the pollution level. We also compare the effects of an emission tax and tradable pollution permits on welfare, technology adoption, and pollution level. We show that, ...

  12. Environmental tools in product development

    DEFF Research Database (Denmark)

    Wenzel, Henrik; Hauschild, Michael Zwicky; Jørgensen, Jørgen

    1994-01-01

    A precondition for design of environmentally friendly products is that the design team has access to methods and tools supporting the introduction of environmental criteria in product development. A large Danish program, EDIP, is being carried out by the Institute for Product Development, Technical...... University of Denmark, in cooperation with 5 major Danish companies aiming at the development and testing of such tools. These tools are presented in this paper...

  13. Environmental management in product chains

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Forman, Marianne; Hansen, Anne Grethe

    of environmental initiatives, a number of recommendations for governmental regulation, which can support the further diffusion of environmental management in product chains, are developed. Furthermore, the report describes a number of theoretical perspectives from sociology of technology, organisation theory......This report presents the analyses of the shaping, implementation and embedding of eight types of environmental initiatives in product chains. The analyses focus on • the role of the type of product and branch, of the size of the companies and of governmental regulation • the focus...... of the environmental concerns and the reductions in environmental impact • organisational changes which have been part of the embedding of the initiatives The analyses are based on 25 cases from national and international product chains involving one or more Danish companies. Based on the analyses of the eight types...

  14. A Study of Goal Frames Shaping Pro-Environmental Behaviour in University Students

    Science.gov (United States)

    Chakraborty, Arpita; Singh, Manvendra Pratap; Roy, Mousumi

    2017-01-01

    Purpose: The purpose of this paper is to examine the role of university in shaping pro-environmental behaviour in students. Design/methodology/approach: The paper used goal-framing theory to investigate the relationship between goals and pro-environmental behaviour by comparing the responses of entry- and exit-level students. Structural equation…

  15. International viewpoints on environmental protection: goals and methods

    International Nuclear Information System (INIS)

    Johnston, P.A.; Carroll, S.; Stephenson, A.D.; Stringer, R.L.; Santillo, D.

    1996-01-01

    Environmental protection of natural ecosystems against the effects of radiation has been largely predicated upon human radiological protection regimes. It has been explicitly assumed that if human populations are adequately protected then this will also confer protection to other species at the population level and hence to the 'environment'. Accordingly, non-human organisms have principally been incorporated into regulatory and assessment frameworks in recognition of their role as part of diverse critical pathways of radionuclide transfer to human populations. Hence, the utility of these non-human organisms in assessing hazards to ecosystems is strictly limited since their selection for monitoring purposes relates more to human perspectives than to their role and importance in natural ecosystems. By contrast, a multispecies ecosystem level approach should work on the basis of selecting 'keystone' species and evaluating the effects of radiation upon natural ecosystem dynamics. This would accommodate the full range of sub-lethal effects, differential life-stage sensitivity, reproductive sensitivity and interspecific interactions. While such an approach would undoubtedly improve the current situation, experience from chemical ecotoxicology suggests that the selection and verification of suitable endpoints will prove difficult beyond an organismal level. Thus, a regulatory regime based upon this approach is almost certain to be less than effective at protecting the environment. The precautionary approach to environmental protection has largely grown from an awareness of the limitations of ecotoxicological studies and protocols. This paper, therefore, considers the need for application of such an approach in relation to environmental protection requirements of the nuclear industry

  16. Integrating energy and environmental goals. Investment needs and technology options

    International Nuclear Information System (INIS)

    2004-04-01

    Economic and population growth will continue to drive an expansion of the global energy market. The Earth's energy resources are undoubtedly adequate to meet rising demand for at least the next three decades. But the projected increases in energy consumption and market developments raise serious concerns about the security of energy supplies, investment in energy infrastructure, the threat of environmental damage caused by energy use and the uneven access of the world's population to modern energy. The first two sections of this background paper provide an outlook for energy demand and emissions over the next thirty years, based on findings in the IEA's World Energy Outlook 2002. Section four presents projections for global investment needs from the latest WEO publication, the World Energy Investment Outlook 2003. For both the energy and investment outlooks, an alternative scenario for OECD countries is examined. The scenarios describe a world in which environmental and energy supply security concerns will continue to plague policy makers. Clearly, changes in power generation, automotive engines and fuel technologies will be required to change trends in energy demand and emissions over the next thirty years and beyond. Improvements in energy efficiency will also play a fundamental role. A number of technologies offer the long term potential to diversify the energy sector away from its present heavy reliance on fossil fuels. Based on various IEA studies, section five evaluates those technologies that offer the potential to reduce emissions, including renewable energy, fossil-fuel use with CO2 capture and storage, nuclear, hydrogen, biofuels and efficient energy end use. No single technology can meet the challenge by itself. Different regions and countries will require different combinations of technologies to best serve their needs and best exploit their indigenous resources. Developing countries, in particular, will face far greater challenges in the years ahead

  17. The abolition of war as a goal of environmental policy.

    Science.gov (United States)

    Snyder, Brian F; Ruyle, Leslie E

    2017-12-15

    Since the 1950s, select military and political leaders have had the capacity to kill all or nearly all human life on Earth. The number of people entrusted with this power grows each year through proliferation and the rise of new political leaders. If humans continue to maintain and develop nuclear weapons, it is highly probable that a nuclear exchange will occur again at some point in the future. This nuclear exchange may or may not annihilate the human species, but it will cause catastrophic effects on the biosphere. The international community has attempted to resolve this existential problem via treaties that control and potentially eliminate nuclear weapons, however, these treaties target only nuclear weapons, leaving the use of war as a normalized means for settling conflict. As long as war exists as a probable future, nations will be under pressure to develop more powerful weapons. Thus, we argue that the elimination of nuclear weapons alone is not a stable, long-term strategy. A far more secure strategy would be the elimination of war as a means of settling international disputes. Therefore, those concerned about environmental sustainability or the survival of the biosphere should work to abolish war. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Environmental costs of meat production

    DEFF Research Database (Denmark)

    Nguyen, T Lan T; Hermansen, John Erik; Mogensen, Lisbeth

    2012-01-01

    This paper aims to address two questions: First, what is the real cost of meat to society if taking into account the environmental costs arising throughout the product life cycle; and second, whether and how the environmental costs related to meat production can be reduced. In addressing the issues...... to be the main contributor to the costs (55%), followed by global warming (21%) and respiratory inorganics (18%). A viable option combining improvement measures in three aspects: feed use, manure management, and manure utilization, reduces the environmental costs by a factor of 1.4. This results in an equal size......, we use pig meat production in the EU as a case study. The environmental costs of meat are displayed first as characterized results at different midpoint categories e.g. global warming, nature occupation, acidification, eutrophication, ecotoxicity, etc., and then aggregated into a single score using...

  19. Environmental impacts on technical products

    International Nuclear Information System (INIS)

    1991-01-01

    The interaction between an object and its environment is examined by methods of environment simulation. With regard to possible synergisms, technical considerations and holistic thinking are essential. Environmental simulation is mainly concerned with questions of ability to function and the service life of technical products in their environment. The environmental simulation is used to discover cause/effect mechanisms in ageing and weathering processes. Questions of artificial ageing and speeded up time tests play a great part here. (orig.) [de

  20. Goal specificity: a proxy measure for improvements in environmental outcomes in collaborative governance.

    Science.gov (United States)

    Biddle, Jennifer C; Koontz, Tomas M

    2014-12-01

    Collaborative governance critics continually call for evidence to support its prevalent use. As is often the case in environmental policy, environmental outcomes occur at a rate incompatible with political agendas. In addition, a multitude of possibly confounding variables makes it difficult to correlate collaborative governance processes with environmental outcomes. The findings of this study offer empirical evidence that collaborative processes have a measurable, beneficial effect on environmental outcomes. Through the use of a unique paired-waterbody design, our dataset reduced the potential for confounding variables to impact our environmental outcome measurements. The results of a path analysis indicate that the output of setting specific pollutant reduction goals is significantly related to watershed partnerships' level of attainment of their environmental improvement goals. The action of setting specific goals (e.g. percentage of load reductions in pollutant levels) is fostered by sustained participation from partnership members throughout the lifecycle of the collaborative. In addition, this study demonstrates the utility of logic modeling for environmental planning and management, and suggests that the process of setting specific pollutant reduction goals is a useful proxy measure for reporting progress towards improvements in environmental outcomes when long-term environmental data are not available. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Waste minimization and the goal of an environmentally benign plutonium processing facility: A strategic plan

    International Nuclear Information System (INIS)

    Pillay, K.K.S.

    1994-02-01

    To maintain capabilities in nuclear weapons technologies, the Department of Energy (DOE) has to maintain a plutonium processing facility that meets all the current and emerging standards of environmental regulations. A strategic goal to transform the Plutonium Processing Facility at Los Alamos into an environmentally benign operation is identified. A variety of technologies and systems necessary to meet this goal are identified. Two initiatives now in early stages of implementation are described in some detail. A highly motivated and trained work force and a systems approach to waste minimization and pollution prevention are necessary to maintain technical capabilities, to comply with regulations, and to meet the strategic goal

  2. Charcoal production and environmental degradation

    International Nuclear Information System (INIS)

    Hosier, R.H.

    1993-01-01

    This paper examines the environmental impacts of continued tree harvesting for charcoal production to supply the urban areas in Tanzania. Woodlands appear to recover relatively well following harvesting for charcoal production. Selective harvesting, where the high quality, low cost fuel production species and specimens are culled first from a piece of land, serves to maintain the viability of the woodlands resource while providing charcoal. This recovery period can be prolonged through any number of human induced activities, such as heavy grazing, multiple burns and extended cultivation periods. At the same time, post-harvest management techniques, such as coppice management, sprout protection and fertilization, can also improve the ability of woodlands to recover following harvesting. The environmental history of a given area determines why certain areas continue to be strong suppliers of woodfuel while others are not. For example, Shinyanga started from a low productivity base and has been degraded by successive waves of tree harvesting compounded by heavy grazing pressure. It is this multiple complex of pressures over a long period of time on land which is intrinsically of low productivity, and not the harvesting of woodlands for fuels, which has led to the environmental degradation in these areas. (author)

  3. A goal programming model for environmental policy analysis: Application to Spain

    International Nuclear Information System (INIS)

    San Cristóbal, José Ramón

    2012-01-01

    Sustainable development has become an important part of international and national approaches to integrate economic, environmental, social and ethical considerations so that a good quality of life can be enjoyed by current and future generations for as long as possible. However, nowadays sustainable development is threatened by industrial pollution emissions which cause serious environmental problems. Due to a lack of adequate quantitative models for environmental policy analysis, there is a strong need for analytical models in order to know the effects of environmental policies. In the present paper, a goal programming model, based on an environmental/input–output linear programming model, is developed and applied to the Spanish economy. The model combines relations between economic, energy, social and environmental effects, providing valuable information for policy-makers in order to define and examine the different goals that must be implemented to reach sustainability. - Highlights: ► In this paper a goal programming model is developed. ► The model considers environmental, energy, social and economic goals. ► The model shows the effects of a reduction in greenhouse gasses emission and energy requirements. ► The model is applied to the Spanish economy.

  4. Balancing tradeoffs: Reconciling multiple environmental goals when ecosystem services vary regionally

    Science.gov (United States)

    O’Connell, Christine S.; Carlson, Kimberly M.; Cuadra, Santiago; Feeley, Kenneth J.; Gerber, James; West, Paul C.; Polasky, Stephen

    2018-06-01

    As the planet’s dominant land use, agriculture often competes with the preservation of natural systems that provide globally and regionally important ecosystem services. How agriculture impacts ecosystem service delivery varies regionally, among services being considered, and across spatial scales. Here, we assess the tradeoffs between four ecosystem services—agricultural production, carbon storage, biophysical climate regulation, and biodiversity—using as a case study the Amazon, an active frontier of agricultural expansion. We find that the highest values for each of the ecosystem services are concentrated in different regions. Agricultural production potential and carbon storage are highest in the north and west, biodiversity greatest in the west, and climate regulation services most vulnerable to disruption in the south and east. Using a simple optimization model, we find that under scenarios of agricultural expansion that optimize total production across ecosystem services, small increases in priority for one ecosystem service can lead to reductions in other services by as much as 140%. Our results highlight the difficulty of managing landscapes for multiple environmental goals; the approach presented here can be adapted to guide value-laden conservation decisions and identify potential solutions that balance priorities.

  5. The development of environmental productivity

    DEFF Research Database (Denmark)

    Henningsen, Geraldine; Henningsen, Arne; Schröder, Sascha T.

    the environmental productivity of individual generator units based on a panel data set for the period 1998 to 2011 that includes virtually all fuel-fired generator units in Denmark. We further decompose total productivity into technical efficiency, best practice ratio, and scale efficiency and use a global...... Malmquist index to calculate the yearly changes. By applying time series clustering, we can identify high, middle, and low performance groups of generator units in a dynamic setting. Our results indicate that the sectoral productivity only slightly increased over the fourteen years. Furthermore, we find...... that there is no overall high achiever group, but that the ranking, although time consistent, varies between the different productivity measures. However, we identify steam turbines and combustion engines for combined heat and power production as potential high performers, while combustion engines that only produce...

  6. Polluting Production - Environmentally Sound Alternatives

    OpenAIRE

    Tamás Kocsis

    2002-01-01

    With the determination of principal parameters of producing and pollution abatement technologies, this paper quantifies abatement and external costs at the social optimum and analyses the dynamic relationship between technological development and the above-mentioned costs. With the partial analysis of parameters, the paper presents the impacts on the level of pollution and external costs of extensive and intensive environmental protection, market demand change and product fees, and not enviro...

  7. Environmental impact of energy production

    International Nuclear Information System (INIS)

    Lidgate, David

    1992-01-01

    Care of the environment is set to be one of the growth industries of the 1990s. Unfortunately, information as to the effect current life styles are having on the environment and, therefore, what remedial action is necessary, varies from the full to the non-existent and, worst of all, from the misleading to the incorrect. For various reasons, some aspects of technology have received greater attention from the media and environmental pressure groups than others. Energy production and conversion technologies, of course, are very much in this category. Indeed, the problem in these areas is not lack of information but a positive surfeit. (author)

  8. Making Sustainable Consumption and Production the Core of Sustainable Development Goals

    Directory of Open Access Journals (Sweden)

    Lewis Akenji

    2014-01-01

    Full Text Available This paper argues that sustainable consumption and production (SCP should play a prominent role in the formulation and implementation of the sustainable development goals (SDGs and discusses how this could be practically done. Unsustainable patterns of consumption and production have been declared the primary cause of environmental deterioration. This was clearly recognized already at the United Nations Conference on Environment and Development (or the Rio Summit in 1992; and this recognition has been reconfirmed in all high-level sustainability meetings since then. SCP aims to change these patterns; it is a policy agenda for addressing the root causes of our ecological predicament, while, at the same time, providing for human wellbeing and prosperity. Drawing from international agreements, practical policy experience and research from a range of disciplines, the paper provides a clarifying framework for scientifically robust, policy-relevant and practical goal-setting for SCP within the SDGs. Special attention is given to how SCP in the SDGs can create synergies with other international policy initiatives. The paper explores the advantages and disadvantages of two possible options for reflecting SCP in the SDGs framework: (i SCP as a stand-alone goal; and (ii SCP as a cross-cutting objective, embedded within relevant goals. While these two options are not necessarily mutually exclusive, given the competing number of issues for prioritization and the fact that a 10-Year Framework of Programs on SCP has also recently been established, it is hardly foreseeable that both options can be realized. The paper further proposes a set of basic principles for SCP at the global level and makes recommendations towards the formulation of indicators supporting SCP objectives in the SDGs.

  9. Think global, act local : The effect of goal and mindset specificity on willingness to donate to an environmental organization

    NARCIS (Netherlands)

    Rabinovich, A.; Morton, T.; Postmes, T.; Verplanken, B.

    2009-01-01

    This paper investigated the effect of goal and mindset specificity on goal-related behavior in the environmental domain. Two Studies demonstrated that goal-related behavior was maximized when participants focused on an abstract goal in combination with a specific mindset, or when they focused on a

  10. Hedgerow benefits align with food production and sustainability goals

    Directory of Open Access Journals (Sweden)

    Rachael F. Long

    2017-09-01

    Full Text Available Restoring hedgerows, or other field edge plantings, to provide habitat for bees and other beneficial insects on farms is needed to sustain global food production in intensive agricultural systems. To date, the creation of hedgerows and other restored habitat areas on California farms remains low, in part because of a lack of information and outreach that addresses the benefits of field edge habitat, and growers' concerns about its effect on crop production and wildlife intrusion. Field studies in the Sacramento Valley highlighted that hedgerows can enhance pest control and pollination in crops, resulting in a return on investment within 7 to 16 years, without negatively impacting food safety. To encourage hedgerow and other restoration practices that enhance farm sustainability, increased outreach, technical guidance, and continued policy support for conservation programs in agriculture are imperative.

  11. LIFE CYCLE OF THE PHARMACEUTICAL PRODUCT AND PRIMARY STRATEGIC GOALS

    Directory of Open Access Journals (Sweden)

    Cristina\tCIOT

    2015-12-01

    Full Text Available In addition to innovation, production at high standards, market and marketing policy, pharmaceutical companies need strategies that could cope with apparent contradictions, convergences and divergences, centralisation and involution, at the global and local level, focus and liberty, domestic production and external supply, ownership and alliances, networks and hierarchies, science or market orientation, all these being part of the essence of a profitable and expanding pharmaceutical company. Specialists appreciate that the 20 century will remain in the collective memory for its technological achievements, including a better understanding of the atomic structure, „information explosion” encouraged by the progress of the computer technology, the news from space exploration. If one wants to evaluate its importance in terms of impact on people’s lives, the 20 century could be called THE DRUG AREA. Many experts agree that, at the end of this century, pharmaceutical products would have a higher importance for our lives due to the special progress in neurobiology, immunology, molecular biology, cellular differentiation, cell membrane and genetic studies. In the pharmaceutical industry, important funds are directed towards research and development, while few understand and appreciate the contribution brought by the pharmaceutical marketing system and by the professionals in this field. These ones make the drug accessible at the right time and place, in the required quantity, at a reasonable price and with all the information required.

  12. Visualising the environmental appearance of audio products

    Energy Technology Data Exchange (ETDEWEB)

    Stilma, M. [Univ. of Twente, Enschede (Netherlands); Stevels, A. [Delft Univ. of Technology, Delft (Netherlands)]|[Philips Consumer Electronics, Eindhoven (Netherlands); Christiaans, H.; Kandachar, P. [Delft Univ. of Technology, Delft (Netherlands)

    2004-07-01

    Can environmental friendliness be communicated by the design style and appearance of products? (such as form, colour, style or material)? Consumers are interested in buying environmental products and design styles might be used as communicative tools. However, current 'green' products show something else. Environmental aspects are chiefly promoted by marketing programs based on technical items like the use of materials, hazardous substances, energy consumption, etc. By a qualitative and exploratory research the environmental design styles according to consumers' opinions were analysed with larger audio products as case study. Visible distinctive differences can be identified between the most and the least environmental rated products. A 'Green flagship', which claims to be environmentally orientated, wasn't recognised as such by consumers. And women and men perceive environmental friendliness in another way. From this research can be concluded that more attention is needed to visualise the good technical environmental performance of products. (orig.)

  13. Advanced Manufacturing for Thermal and Environmental Control Systems: Achieving National Energy Goals

    Energy Technology Data Exchange (ETDEWEB)

    Bogucz, Edward A. [Syracuse Univ., NY (United States)

    2017-02-20

    This project was part of a regional initiative in the five counties of Central New York (CNY) that received funding from the U.S. Department of Energy (DOE) and four other federal agencies through the 2012 Advanced Manufacturing Jobs and Innovation Accelerator Challenge (AMJIAC). The CNY initiative was focused on cultivating the emergent regional cluster in “Advanced Manufacturing for Thermal and Environmental Control (AM-TEC).” As one component of the CNY AM-TEC initiative, the DOE-funded project supported five research & development seed projects that strategically targeted: 1) needs and opportunities of CNY AM-TEC companies, and 2) the goal of DOE’s Advanced Manufacturing Office (AMO) to reduce energy consumption by 50% across product life-cycles over 10 years. The project also sought to fulfill the AMO mission of developing and demonstrating new, energy-efficient processing and materials technologies at a scale adequate to prove their value to manufacturers and spur investment. The five seed projects demonstrated technologies and processes that can reduce energy intensity and improve production as well as use less energy throughout their lifecycles. The project was conducted over three years in two 18-month budget periods. During the first budget period, two projects proposed in the original AMJAIC application were successfully completed: Seed Project 1 focused on saving energy in heat transfer processes via development of nano structured surfaces to significantly increase heat flux; Seed Project 2 addressed saving energy in data centers via subzero cooling of the computing processors. Also during the first budget period, a process was developed and executed to select a second round of seed projects via a competitive request for proposals from regional companies and university collaborators. Applicants were encouraged to form industry-academic partnerships to leverage experience and resources of public and private sectors in the CNY region. Proposals were

  14. A Goal Programming Optimization Model for The Allocation of Liquid Steel Production

    Science.gov (United States)

    Hapsari, S. N.; Rosyidi, C. N.

    2018-03-01

    This research was conducted in one of the largest steel companies in Indonesia which has several production units and produces a wide range of steel products. One of the important products in the company is billet steel. The company has four Electric Arc Furnace (EAF) which produces liquid steel which must be procesed further to be billet steel. The billet steel plant needs to make their production process more efficient to increase the productvity. The management has four goals to be achieved and hence the optimal allocation of the liquid steel production is needed to achieve those goals. In this paper, a goal programming optimization model is developed to determine optimal allocation of liquid steel production in each EAF, to satisfy demand in 3 periods and the company goals, namely maximizing the volume of production, minimizing the cost of raw materials, minimizing maintenance costs, maximizing sales revenues, and maximizing production capacity. From the results of optimization, only maximizing production capacity goal can not achieve the target. However, the model developed in this papare can optimally allocate liquid steel so the allocation of production does not exceed the maximum capacity of the machine work hours and maximum production capacity.

  15. Infrastructure and automobile shifts: positioning transit to reduce life-cycle environmental impacts for urban sustainability goals

    International Nuclear Information System (INIS)

    Chester, Mikhail; Pincetl, Stephanie; Elizabeth, Zoe; Eisenstein, William; Matute, Juan

    2013-01-01

    Public transportation systems are often part of strategies to reduce urban environmental impacts from passenger transportation, yet comprehensive energy and environmental life-cycle measures, including upfront infrastructure effects and indirect and supply chain processes, are rarely considered. Using the new bus rapid transit and light rail lines in Los Angeles, near-term and long-term life-cycle impact assessments are developed, including consideration of reduced automobile travel. Energy consumption and emissions of greenhouse gases and criteria pollutants are assessed, as well the potential for smog and respiratory impacts. Results show that life-cycle infrastructure, vehicle, and energy production components significantly increase the footprint of each mode (by 48–100% for energy and greenhouse gases, and up to 6200% for environmental impacts), and emerging technologies and renewable electricity standards will significantly reduce impacts. Life-cycle results are identified as either local (in Los Angeles) or remote, and show how the decision to build and operate a transit system in a city produces environmental impacts far outside of geopolitical boundaries. Ensuring shifts of between 20–30% of transit riders from automobiles will result in passenger transportation greenhouse gas reductions for the city, and the larger the shift, the quicker the payback, which should be considered for time-specific environmental goals. (letter)

  16. Infrastructure and automobile shifts: positioning transit to reduce life-cycle environmental impacts for urban sustainability goals

    Science.gov (United States)

    Chester, Mikhail; Pincetl, Stephanie; Elizabeth, Zoe; Eisenstein, William; Matute, Juan

    2013-03-01

    Public transportation systems are often part of strategies to reduce urban environmental impacts from passenger transportation, yet comprehensive energy and environmental life-cycle measures, including upfront infrastructure effects and indirect and supply chain processes, are rarely considered. Using the new bus rapid transit and light rail lines in Los Angeles, near-term and long-term life-cycle impact assessments are developed, including consideration of reduced automobile travel. Energy consumption and emissions of greenhouse gases and criteria pollutants are assessed, as well the potential for smog and respiratory impacts. Results show that life-cycle infrastructure, vehicle, and energy production components significantly increase the footprint of each mode (by 48-100% for energy and greenhouse gases, and up to 6200% for environmental impacts), and emerging technologies and renewable electricity standards will significantly reduce impacts. Life-cycle results are identified as either local (in Los Angeles) or remote, and show how the decision to build and operate a transit system in a city produces environmental impacts far outside of geopolitical boundaries. Ensuring shifts of between 20-30% of transit riders from automobiles will result in passenger transportation greenhouse gas reductions for the city, and the larger the shift, the quicker the payback, which should be considered for time-specific environmental goals.

  17. Climate Change: Implications for the Assumptions, Goals and Methods of Urban Environmental Planning

    Directory of Open Access Journals (Sweden)

    Kristina Hill

    2016-12-01

    Full Text Available As a result of increasing awareness of the implications of global climate change, shifts are becoming necessary and apparent in the assumptions, concepts, goals and methods of urban environmental planning. This review will present the argument that these changes represent a genuine paradigm shift in urban environmental planning. Reflection and action to develop this paradigm shift is critical now and in the next decades, because environmental planning for cities will only become more urgent as we enter a new climate period. The concepts, methods and assumptions that urban environmental planners have relied on in previous decades to protect people, ecosystems and physical structures are inadequate if they do not explicitly account for a rapidly changing regional climate context, specifically from a hydrological and ecological perspective. The over-arching concept of spatial suitability that guided planning in most of the 20th century has already given way to concepts that address sustainability, recognizing the importance of temporality. Quite rapidly, the concept of sustainability has been replaced in many planning contexts by the priority of establishing resilience in the face of extreme disturbance events. Now even this concept of resilience is being incorporated into a novel concept of urban planning as a process of adaptation to permanent, incremental environmental changes. This adaptation concept recognizes the necessity for continued resilience to extreme events, while acknowledging that permanent changes are also occurring as a result of trends that have a clear direction over time, such as rising sea levels. Similarly, the methods of urban environmental planning have relied on statistical data about hydrological and ecological systems that will not adequately describe these systems under a new climate regime. These methods are beginning to be replaced by methods that make use of early warning systems for regime shifts, and process

  18. Proposing an Aggregate Production Planning Model by Goal Programming Approach, a Case Study

    Directory of Open Access Journals (Sweden)

    Mansoureh Farzam Rad

    2014-06-01

    Full Text Available Production planning is one of the most important functions in the process of production management. Production planning in the intermediate range of time is termed as aggregate production planning (APP. Aggregate production planning is an important upper level planning activity in a production management system. The present study tries to suggest an aggregate production planning model for products of Hafez tile factory during one year. Due to this fact that the director of the company seeks 3 main objectives to determine the optimal production rate, the linear goal planning method was employed. After solving the problem, in order to examine the efficiency and the distinctiveness of this method in compare to linear programming, the problem was modeled just by considering one objective then was solved by linear programming approach. The findings revealed the goal programming with multi objectives resulted more appropriate solution rather than linear programming with just one objective.

  19. Environmental costs of fossil fuel energy production

    International Nuclear Information System (INIS)

    Riva, A.; Trebeschi, C.

    1997-01-01

    The costs of environmental impacts caused by fossil fuel energy production are external to the energy economy and normally they are not reflected in energy prices. To determine the environmental costs associated with an energy source a detailed analysis of all environmental impacts of the complete energy cycle is required. The economic evaluation of environmental damages is presented caused by atmospheric emissions produced by fossil fuel combustion for different uses. Considering the emission factors of sulphur oxides, nitrogen oxides, dust and carbon dioxide and the economic evaluation of their environmental damages reported in literature, a range of environmental costs associated with different fossil fuels and technologies is presented. A comparison of environmental costs resulting from atmospheric emissions produced by fossil-fuel combustion for energy production shows that natural gas has a significantly higher environmental value than other fossil fuels. (R.P.)

  20. Environmental improvement through product development

    DEFF Research Database (Denmark)

    McAloone, Tim C.; Bey, Niki

    Companies in Denmark and abroad are working increasingly to reduce human impacts on the environment and nature. At the same time there must still be a large focus on the creation of value for customers and consumers. This development gives rise to a huge potential for Danish companies, to create ...... Environmental Protection Agency’s company funding scheme. We hope you will be inspired!...

  1. Cleaner production - a tool for sustainable environmental development

    International Nuclear Information System (INIS)

    Ahmad, I.; Batool, S.

    2005-01-01

    Industrial Development and Production with no regard for environmental impacts creates water and air pollution, soil degradation, and large-scale global impacts such as acid rain, global warming and ozone depletion. To create more sustainable methods of industrial production, there needs to be a shift in attitudes away from control towards pollution prevention and management. Cleaner Production (CP) refers to a management process that seeks out and eliminates the causes of pollution, waste generation and resource consumption at their source through input reductions or substitutions, pollution prevention, internal recycling and more efficient production technology and processes for sustainable environmental development. The objective of cleaner production is to avoid generating pollution in the first place, which frequently cuts costs, reduces risks associated with liability, and identifies new market opportunities. Introducing cleaner production has become a goal to improve the competitiveness through increased eco-efficiency. CP is a business strategy for enhancing productivity and environmental performance for overall socio-economic development. The environmental and economic benefits can only be achieved by implementing cleaner production tools. The CP assessment methodology is used to systematically identify and evaluate the waste minimization opportunities and facilitate their implementation in industries. It refers to how goods and services are produced with the minimum environmental impact under present technological and economic limits. CP shares characteristics with many environmental management tools such as Environmental Assessment or Design for Environment by including them among the technological options for reducing material and energy intensiveness in production, as well as facilitating ruse trough remanufacturing and recycling. It is thus an extension of the total quality management process. The CP program has been successfully implemented in

  2. Environmental Management Initiatives in Product Chains

    DEFF Research Database (Denmark)

    Forman, Marianne; Hansen, Anne Grethe; Jørgensen, Michael Søgaard

    The Environmental Council for Cleaner Products in 2000-2001 initiated a collection of experience from the environmental co-operation in 25 product chains. This collection of experience was to elucidate the concrete co-operation between suppliers, enterprises and purchasers, to go through tools...... and to report on opportunities and barriers for environmental efforts in the entire product chain. This paper aims at giving a comprehensive analysis of the experiences, on the basis of the reporting of the 25 companies and their supply chains (reported by Ettrup and Bauer in 2002. The 25 case studies have been...

  3. Effects of setting creative goals of different specificity on judged creativity of the product

    OpenAIRE

    Čorko, Irena; Vranić, Andrea

    2005-01-01

    The study examined the effect of setting creative goals of different specificity on judged creativity of the product. Female psychology students (N=47) were divided in 3 groups. Experimental task was to make a collage. Groups differed in the level of specificity of the given goal. Collages were judged by 11 judges using the consensual assessment technique. Factor analysis of these judgments confirmed 2 orthogonal factors: creativity and technical goodness. Results show that setting a specific...

  4. Applying environmental product design to biomedical products research.

    Science.gov (United States)

    Messelbeck, J; Sutherland, L

    2000-12-01

    The principal themes for the Biomedical Research and the Environment Conference Committee on Environmental Economics in Biomedical Research include the following: healthcare delivery companies and biomedical research organizations, both nonprofit and for-profit, need to improve their environmental performance; suppliers of healthcare products will be called upon to support this need; and improving the environmental profile of healthcare products begins in research and development (R&D). The committee report begins with requirements from regulatory authorities (e.g., U.S. Environmental Protection Agency [EPA], the U.S. Food and Drug Administration), and the healthcare delivery sector). The 1998 American Hospital Association and EPA Memorandum of Understanding to reduce solid waste and mercury from healthcare facilities is emblematic of these requirements. The dominant message from the requirements discussion is to ensure that R&D organizations do not ignore customer, environmental, and regulatory requirements in the early stages of product development. Several representatives from healthcare products manufacturers presented their companies' approaches to meeting these requirements. They reported on efforts to ensure that their R&D processes are sensitive to the environmental consequences from manufacturing, distributing, using, and disposing of healthcare products. These reports describe representatives' awareness of requirements and the unique approaches their R&D organizations have taken to meet these requirements. All representatives reported that their R&D organizations have embraced environmental product design because it avoids the potential of returning products to R&D to improve the environmental profile. Additionally, several reports detailed cost savings, sustainability benefits, and improvements in environmental manufacturing or redesign, and increased customer satisfaction. Many companies in healthcare delivery are working to improve environmental

  5. An integrated framework for encouraging pro-environmental behaviour : The role of values, situational factors and goals

    NARCIS (Netherlands)

    Steg, Linda; Bolderdijk, Jan Willem; Keizer, Kees; Perlaviciute, Goda

    Many environmental behaviours involve a conflict between hedonic and gain goals versus normative goals; people often need to incur some costs to benefit the environment. Based on this assumption, we propose an integrated theoretical framework for understanding behaviour change that identifies two

  6. Processes in Environmental Depositional Systems and Deformation in Sedimentary Basins: Goals for Exoloration in Mexico

    Science.gov (United States)

    Sandoval-Ochoa, J.

    2005-05-01

    Among the recent needs to establish new goals in the mexican energy industry to increase the petroleum reserves, has been necessary to recapitulate on some academic an operative concepts and definitions applied to the Petroliferous Basins Exploration; first of all, in order to understand the Petroleum System in given tectonophysical framework. The tectonophysical environment experienced by the petroliferous basin in the southwestern Gulf of Mexico, merely in the Campeche Sound and adjacent terrestrial regions (Figure 1); has been the result of interaction among the tectonic plates, the Coco's Plate with impingement and subduction beneath the Northamerican Plate and the Yucatán Microplate and even in very deep connection with the oceanic crust of southwesternmost portion of the Gulf of Mexico and the one of the Caribbean sea beneath the gulf of Belize-Honduras. The tectonosedimentary effects in the Campeche Bay starting with the skeleton formed for the Cenozoic Era, kept simultaneous conditions in depositions and deformations because of strain, stress and collapse fields, acted through this Era up to the present day, as observed in the surface Aguayo et al, 1999 and Sandoval, 2000. The involved portions of the crust and its boundaries have also been performing the relative sinking of the mere southwestern centre of the Gulf of Mexico, and the rising of the southeastern lands of Mexico. In the middle contiguity are found the productive Tertiary basins of: Comalcalco, Macuspana, Salina del Itsmo, Campeche-Champoton and other in deep waters; all of them, in an arrangement of basins among distensive faulted blocks in echelon, falling down to the deep centre of the Gulf Sandoval, op cit. With this scenario and that ones of other basins, a recapitulation on concepts and definitions, has been made on the regional natural processes of the environmental depositional systems and on the basins analysis in the tectonophysical framework, in order to reflect on the

  7. Environmental impacts of Proalcool: production and consumption

    International Nuclear Information System (INIS)

    Magrini, A.; Nassi, C.D.; Barcellos, P.P.

    1992-01-01

    The environmental impacts caused by the Programa Nacional do Alcool -PROALCOOL - Brazil, are analysed. Rio de Janeiro and Sao Paulo States are studied, comparing the regional differences. The production and the consumption phases are analysed separately. (L.J.C.)

  8. Design of environmentally friendly products using indicators

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Bey, Niki

    2001-01-01

    The paper describes the requirements of product designers towards methods for environmental evaluation; it argues that indicators can be used for rough environmental evaluations and it presents experiences made with the indicator-based Oil Point Method (OPM). This method is illustrated by means...

  9. Environmental interactions of cement-based products

    NARCIS (Netherlands)

    Florea, M.V.A.; Schmidt, W.; Msinjili, N.S.

    2016-01-01

    The environmental interactions of concrete and other cement-based products encompasses both the influence of such materials on their environment, as well as the effects of the environment on the materials in time. There are a number of ways in which the environmental impact of concrete can be

  10. Environmental innovations in the product chain

    DEFF Research Database (Denmark)

    Remmen, Arne; Holgaard, Jette Egelund

    2003-01-01

    The paper gives a brief overview of different positions within innovation and network theory, and on that basis a framework is developed and discussed in relation to environmental innovations.The paper also highlights how enterprises within two different trades in the Danish food industry have made...... environmental innovations related to their processes and products....

  11. product chain collaboration and environmental innovations

    DEFF Research Database (Denmark)

    Remmen, Arne; Mosgaard, Mette

    2004-01-01

    The paper  builds upon a case study from a number of electronic companies in Denmark and describes from an organisational perspective how organisations make environmental innovations in the product chain.......The paper  builds upon a case study from a number of electronic companies in Denmark and describes from an organisational perspective how organisations make environmental innovations in the product chain....

  12. Environmental innovations in the product chain

    DEFF Research Database (Denmark)

    Remmen, Arne; Holgaard, Jette Egelund

    2004-01-01

    The article gives an overview of different positions within innovation and network theory, and highlights how enterprises within the organic dairy industry and fish processing industry have made environmental innovations related to their processes and products.......The article gives an overview of different positions within innovation and network theory, and highlights how enterprises within the organic dairy industry and fish processing industry have made environmental innovations related to their processes and products....

  13. Environmental Sustainability Analysis of Biodiesel Production

    DEFF Research Database (Denmark)

    Herrmann, Ivan Tengbjerg; Hauschild, Michael Michael Zwicky; Birkved, Morten

    Due to their generally positive carbon dioxide balance, biofuels are seen as one of the energy carriers in a more sustainable future transportation energy system, but how good is their environmental sustainability, and where lie the main potentials for improvement of their sustainability? Questions...... like these require a life cycle perspective on the biofuel - from the cradle (production of the agricultural feedstock) to the grave (use as fuel). An environmental life cycle assessment is performed on biodiesel to compare different production schemes including chemical and enzymatic esterification...... with the use of methanol or ethanol. The life cycle assessment includes all processes needed for the production, distribution and use of the biodiesel (the product system), and it includes all relevant environmental impacts from the product system, ranging from global impacts like climate change and loss...

  14. Energy and environmental implications of copper production

    Energy Technology Data Exchange (ETDEWEB)

    Alvardo, Sergio [Chile Univ., Dept. of Mechanical Engineering, Santiago (Chile); Maldonado, Pedro; Jaques, Ivan [Chile Univ., Energy Research Program, Santiago (Chile)

    1999-04-01

    Primary copper production is a major activity in the mining sector. It is highly energy-intensive, ranking third in specific energy consumption (SEC) among the five major basic metals (aluminum, copper, iron, lead and zinc) and poses important environmental hazards. We examine the large discrepancy between theoretical (from thermodynamics) and actual (from empirical data) SECs and then describe relevant environmental issues, focusing on the most significant energy-related environmental impacts of primary copper production with emphasis on greenhouse-gas (GHG) emissions. An example of GHG energy-related abatement that concurrently improves energy use is presented. (Author)

  15. Environmental consequences of energy production: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1989-01-01

    The Seventeenth Annual Illinois Energy conference entitled Environmental consequences of Energy Production was held in Chicago, Illinois on October 19-20, 1989. The purpose of the meeting was to provide a forum for exchange of information on the technical, economic and institutional issues surrounding energy production and related environmental problems. The conference program was developed by a planning committee which included Illinois energy and environmental specialists from the major sectors including energy industries, environmental organizations, research universities, utility companies, federal, state and local government agencies, and public interest groups. The conference included presentations on four major topic areas. The issue areas were: urban pollution: where are we now and what needs to be done in the future; the acid rain problem: implications of proposed federal legislation on the Midwest; global warming: an update on the scientific debate; and strategies to minimize environmental damage. Separate abstracts have been prepared for the individual presentations. (FL)

  16. Environmental emergency in the oil production and oil products transport

    Directory of Open Access Journals (Sweden)

    Jozef Čopan

    2006-10-01

    Full Text Available The paper refers to the experience of the environmental emergency response in the case of accidental leakages of oil or oil products into the environment. The gained experience is demonstrated on four different sites where the remediation of contaminated soil / groundwater and emergency response were carried out by the Czech environmental company DEKONTA a.s.

  17. Improved Methods for Production Manufacturing Processes in Environmentally Benign Manufacturing

    Directory of Open Access Journals (Sweden)

    Yan-Yan Wang

    2011-09-01

    production process with the goal of reducing and ultimately minimizing the environmental impact while maximizing the resource efficiency is effectively presented. The feasibility of the method is verified by a case study of a whole production process design at the above three levels.

  18. Defining the breeding goal for a sheep breed including production and functional traits using market data.

    Science.gov (United States)

    Theodoridis, A; Ragkos, A; Rose, G; Roustemis, D; Arsenos, G

    2017-11-16

    In this study, the economic values for production and functional traits of dairy sheep are estimated through the application of a profit function model using farm-level technical and economic data. The traits incorporated in the model were milk production, prolificacy, fertility, milking speed, longevity and mastitis occurrence. The economic values for these traits were derived as the approximate partial derivative of the specified profit function. A sensitivity analysis was also conducted in order to examine how potential changes in input and output prices would affect the breeding goal. The estimated economic values of the traits revealed their economic impact on the definition of the breeding goal for the specified production system. Milk production and fertility had the highest economic values (€40.30 and €20.28 per standard genetic deviation (SDa)), while, mastitis only had a low negative value of -0.57 €/SDa. Therefore, breeding for clinical mastitis will have a minor impact on farm profitability because it affects a small proportion of the flock and has low additive variance. The production traits, which include milk production, prolificacy and milking speed, contributed most to the breeding goal (70.0%), but functional traits still had a considerable share (30.0%). The results of this study highlight the importance of the knowledge of economic values of traits in the design of a breeding program. It is also suggested that the production and functional traits under consideration can be categorized as those which can be efficiently treated through genetic improvement (e.g. milk production and fertility) while others would be better dealt with through managerial interventions (e.g. mastitis occurrence). Also, sub-clinical mastitis that affects a higher proportion of flocks could have a higher contribution to breeding goals.

  19. Product behavior and appearance effects on experienced engagement during experimental and goal-directed tasks

    NARCIS (Netherlands)

    Rozendaal, M.C.; Keyson, D.V.; Ridder, de H.

    2007-01-01

    This study examines how digital products can be designed towards increased levels of experienced engagement. An experiment was conducted in which 24 participants were asked to interact with a videogame that varied in behavior and appearance aspects during experiential and goal-directed tasks.

  20. Combining economic and social goals in the design of production systems by using ergonomics standards

    NARCIS (Netherlands)

    J. Dul (Jan); H.J. de Vries (Henk); S. Verschoof (Sandra); W. Eveleens (Wietske); A. Feilzer (Albert)

    2004-01-01

    textabstractIn designing of production systems, economic and social goals can be combined, if ergonomics is integrated into the design process. More than 50 years of ergonomics research and practice have resulted in a large number of ergonomics standards for designing physical and organizational

  1. Environmental aspects of decentralized electricity production

    International Nuclear Information System (INIS)

    Henry, J.P.

    1991-01-01

    Renewable energy sources are the focus of considerable interest because they do not place future generations at risk; the development of cogeneration has been favorably received on the whole because it uses energy that would otherwise be lost. Difficulties are sometimes encountered in the development of small-scale hydroelectric facilities (older facilities negative aspects, over production impression in France, etc.). Environmental protection regulations do not distinguish between centralized and decentralized electricity production, but between large and small production facilities

  2. Development of a framework based on an ecosystem services approach for deriving specific protection goals for environmental risk assessment of pesticides

    DEFF Research Database (Denmark)

    Forbes, Valery E.; Nienstedt, Karin M.; Brock, T. C. M.

    2012-01-01

    General protection goals for the environmental risk assessment (ERA) of plant protection products are stated in European legislation but specific protection goals (SPGs) are often not precisely defined. These are however crucial for designing appropriate risk assessment schemes. The process...... followed by the Panel on Plant Protection Products and their Residues (PPR) of the European Food Safety Authority (EFSA) as well as examples of resulting SPGs obtained so far for environmental risk assessment (ERA) of pesticides is presented. The ecosystem services approach was used as an overarching...... and geographical scale of the effect, and the degree of certainty that the specified level of effect will not be exceeded. In general, to ensure ecosystem services, taxa representative for the key drivers identified need to be protected at the population level. However, for some vertebrates and species that have...

  3. NPOESS Environmental Data Record (EDR) Production

    Science.gov (United States)

    Hughes, R.; Grant, K. D.

    2009-12-01

    The National Oceanic and Atmospheric Administration (NOAA), Department of Defense (DoD), and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation weather and environmental satellite system; the National Polar-orbiting Operational Environmental Satellite System (NPOESS). NPOESS replaces the current Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA and the Defense Meteorological Satellite Program (DMSP) managed by the DoD. The NPOESS satellites carry a suite of sensors that collect meteorological, oceanographic, climatological, and solar-geophysical observations of the earth, atmosphere, and space. The ground data processing segment for NPOESS is the Interface Data Processing Segment (IDPS), developed by Raytheon Intelligence and Information Systems. The IDPS processes NPOESS satellite data to provide environmental data products (aka, Environmental Data Records or EDRs) to NOAA and DoD processing centers operated by the United States government. The IDPS will process EDRs beginning with the NPOESS Preparatory Project (NPP) and continuing through the lifetime of the NPOESS system. Northrop Grumman Aerospace Systems Algorithms and Data Products (A&DP) organization is responsible for the algorithms that produce the EDRs, including their quality aspects. Together, IDPS and A&DP must support the calibration, validation, and data quality improvement initiatives of the NPOESS program to ensure the production of atmospheric and environmental products that meet strict requirements for accuracy and precision. In support of this activity, A&DP and IDPS continually updates the estimated performance of the NPOESS system with respect to both latency and data quality, using the latest operational implementation of the data processing software and information from instrument test activities. This presentation will illustrate and describe the processing chains that create the data products, as well as describe the

  4. NPOESS Preparatory Project (NPP) Environmental Products

    Science.gov (United States)

    Grant, K. D.; Smith, D. C.

    2011-12-01

    The National Oceanic and Atmospheric Administration (NOAA) and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation civilian weather and environmental satellite system: the Joint Polar Satellite System (JPSS). The Joint Polar Satellite System will contribute the afternoon orbit component and ground processing system of the restructured National Polar-orbiting Operational Environmental Satellite System (NPOESS). As such, the Joint Polar Satellite System replaces the current Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA and the ground processing component of both POES and the Defense Meteorological Satellite Program (DMSP) replacement, known as the Defense Weather Satellite System (DWSS), managed by the Department of Defense (DoD). The Joint Polar Satellite System satellite will carry a suite of sensors designed to collect meteorological, oceanographic, climatological, and solar-geophysical observations of the earth, atmosphere, and space. The ground processing system for the Joint Polar Satellite System is known as the Common Ground System (JPSS CGS), and consists of a Command, Control, and Communications Segment (C3S) and the Interface Data Processing Segment (IDPS). Both are developed by Raytheon Intelligence and Information Systems (IIS). The Interface Data Processing Segment will process Joint Polar Satellite System and Defense Weather Satellite System satellite data to provide environmental data products (aka, Environmental Data Records or EDRs) to the National Oceanic and Atmospheric Administration and Department of Defense processing centers operated by the United States government. The Interface Data Processing Segment will process Environmental Data Records beginning with the NPOESS Preparatory Project (NPP) and continue through the lifetime of the Joint Polar Satellite System and Defense Weather Satellite System programs. Under the National Polar-orbiting Operational Environmental

  5. Integrating environmental goals into urban redevelopment schemes: lessons from the Code River, Yogyakarta, Indonesia.

    Science.gov (United States)

    Setiawan, B B

    2002-01-01

    The settlement along the bank of the Code River in Yogyakarta, Indonesia provides housing for a large mass of the city's poor. Its strategic location and the fact that most urban poor do not have access to land, attracts people to "illegally" settle along the bank of the river. This brings negative consequences for the environment, particularly the increasing domestic waste along the river and the annual flooding in the rainy season. While the public controversies regarding the existence of the settlement along the Code River were still not resolved, at the end of the 1980s, a group of architects, academics and community members proposed the idea of constructing a dike along the River as part of a broader settlement improvement program. From 1991 to 1998, thousands of local people mobilized their resources and were able to construct 6,000 metres of riverside dike along the Code River. The construction of the riverside dike along the River has become an important "stimulant" that generated not only settlement improvement, but also a better treatment of river water. As all housing units located along the River are now facing the River, the River itself is considered the "front-yard". Before the dike was constructed, the inhabitants used to treat the River as the "backyard" and therefore just throw waste into the River. They now really want to have a cleaner river, since the River is an important part of their settlement. The settlement along the Code River presents a complex range of persistent problems with informal settlements in Indonesia; such problems are related to the issues of how to provide more affordable and adequate housing for the poor, while at the same time, to improve the water quality of the river. The project represents a good case, which shows that through a mutual partnership among stakeholders, it is possible to integrate environmental goals into urban redevelopment schemes.

  6. A method to define breeding goals for sustainable dairy cattle production.

    Science.gov (United States)

    Nielsen, H M; Christensen, L G; Odegård, J

    2006-09-01

    The objective of this study was to present a method to define breeding goals for sustainable dairy cattle production by adding nonmarket values to market economic values for functional traits in the breeding goal. A nonmarket value can represent the value of improved animal welfare or societal influences for animal production. The nonmarket value for mastitis resistance, conception rate, and stillbirth were derived based on how much farmers or breeding companies were willing to lose in selection response for milk yield to improve functional traits. The desired response for milk yield corresponding to a given percent loss was obtained using desired gain indices. By allowing a 5% loss in the selection response for milk yield, the nonmarket value was found to be 40.4 euro for mastitis resistance, 16.1 euro for conception rate, and 9.7 euro for stillbirth. The nonmarket value increased proportionally with increasing loss in the selection response for milk yield, but the selection response was lower for conception rate than for mastitis resistance because of differences in market economic value and heritability. To increase the response for conception rate, the nonmarket value was also derived for 2 situations, in which the desired responses for milk yield, mastitis resistance, and conception rate were specified. The method can be used to define breeding goals for sustainable production and to increase the response for traits that are at critically low levels. When defining breeding goals for sustainable production, breeding organizations should predict the selection response based on market economic value and add non-market value for traits with unacceptable selection responses.

  7. Technology diffusion, product differentiation and environmental subsidies

    Energy Technology Data Exchange (ETDEWEB)

    McGinty, M. [Univ. of Wisconsin, Milwaukee, WI (United States). Dept. of Economics; Vries, F.P. de [Univ. of Groningen (Netherlands). Dept. of Law and Economics

    2007-07-01

    Technological change is often seen as the promising device that will mitigate or solve environmental problems. Policy intervention that spurs the development, adoption and diffusion of new, environmentally benign technologies therefore holds great appear for environmental authorities. Policymakers have various instruments at their disposal to affect technological diffusion, ranging from direct regulation (command-and-control strategies) to market-based instruments, such as taxes, subsidies and tradable pollution permits. This paper examines environmental subsidies as a technology diffusion policy. The authors apply evolutionary game theory to explore the relationship between subsidies for clean technology, the diffusion of that technology and the degree of product differentiation in an imperfectly competitive market. They show that the subsidy succeeds in reducing environmental damage only when the substitution effect (the reduction in pollution associated with the clean technology) exceeds the output effect (the extent that the subsidy increases output). When the substitution effect does dominate, environmental damage decreases monotonically during the diffusion process. The extent of diffusion (the degree to which clean technolgy replaces dirty) and the likelihood that the substitution effect will dominate both decrease with the extent of product differentiation. Finally, the subsidy for clean technology will spill over to the remaining dirty producers increasing their profit as well.

  8. Environmental considerations in energy crop production

    International Nuclear Information System (INIS)

    Ranney, J.W.; Mann, L.K.

    1994-01-01

    This paper is a preliminary attempt to provide information on the probable environmental effects of energy crop production relative to other potential uses of the land. While dedicated energy crop production is anticipated to occur primarily on land currently in agricultural production, some pastureland and forestland with a high potential for conversion to agricultural production may be utilized. Experimental results suggest that chemical use on energy crops will be lower than on most row crops and that land producing energy crops should experience less erosion than land producing row crops. Long-term site productivity should not be a major issue if macro-and micro-fertilizers are added as needed and nutrient-conserving production techniques are used. (Author)

  9. Product-related Environmental Performance Indicators: a systematic literature review

    DEFF Research Database (Denmark)

    Issa, Isabela I.; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

    2013-01-01

    Ecodesign is a proactive environmental management approach employed in the product development process (PDP) which aims to minimize the environmental impacts caused during products’ life-cycle, improving its environmental performance. The establishment of measurable environmental performance...

  10. Goal and Scope in Life Cycle Sustainability Analysis: The Case of Hydrogen Production from Biomass

    Directory of Open Access Journals (Sweden)

    Milena Stefanova

    2014-08-01

    Full Text Available The framework for life cycle sustainability analysis (LCSA developed within the project CALCAS (Co-ordination Action for innovation in Life-Cycle Analysis for Sustainability is introducing a truly integrated approach for sustainability studies. However, it needs to be further conceptually refined and to be made operational. In particular, one of the gaps still hindering the adoption of integrated analytic tools for sustainability studies is the lack of a clear link between the goal and scope definition and the modeling phase. This paper presents an approach to structure the goal and scope phase of LCSA so as to identify the relevant mechanisms to be further detailed and analyzed in the modeling phase. The approach is illustrated with an on-going study on a new technology for the production of high purity hydrogen from biomass, to be used in automotive fuel cells.

  11. Environmental impacts from Danish fish products

    DEFF Research Database (Denmark)

    Thrane, Mikkel

    This dissertation presents an assessment of the environmental impacts from Danish fish products in a life cycle perspective (from sea to table). The assessment is carried out in three steps ? and includes a MECO analysis, a quantitative LCA and a qualitative LCA. The results are used to discuss...... current environmental policies addressing the fishery, landing and auction, the fish processing industry, wholesale, transport, retail, and use.It is concluded that considerable improvement potentials exist in the fishing stage, which also represents the largest environmental impact potential compared....... It is suggested that passive and semi-active fishing methods such as Danish seine, purse seine, gillnet and long line represent a significant improvement potential compared to trawl. And it is shown that the energy consumption can be reduced with a factor 15 by substituting beam trawl with Danish seine...

  12. Policy in Conflict: The Struggle Between Environmental Policy and Homeland Security Goals

    Science.gov (United States)

    2013-09-01

    environmental and energy 34 policy (Murkowski, 2010). However, a good set of literature on the broader, macro level question central to this investigation...terms of increasing efficiency of the automotive fleet (demand side), certain environmental policies have the unintended consequence of restricting the...Middle East  Broader aspects of the struggle between environmental policy and energy policy  A broad analysis of ways to diminish animus toward the

  13. The interactive effects of affect and shopping goal on information search and product evaluations.

    Science.gov (United States)

    Chen, Fangyuan; Wyer, Robert S; Shen, Hao

    2015-12-01

    Although shoppers often want to evaluate products to make a purchase decision, they can also shop for enjoyment. In each case, the amount of time they spend on shopping and the number of options they consider can depend on the mood they happen to be in. We predicted that mood can signal whether the goal has been attained and when people should stop processing information. When people are primarily motivated to purchase a particular type of product, positive mood signals that they have done enough. Thus, they consider less information if they are happy than if they are unhappy. When people shop for enjoyment, however, positive mood signals that they are still having fun. Thus, they consider more information when they are happy than when they are not. Four experiments among university students (N = 827) examined these possibilities. Experiment 1 provided initial evidence for the interactive effects of mood and goals on search behavior and product evaluation. Other studies examined the implications of this conceptualization for different domains: (a) the relative impact of brand and attribute information on judgments (Experiment 2), (b) gender differences in shopping behavior (Experiment 3), and (c) the number of options that people review in an actual online shopping website (Experiment 4). (c) 2015 APA, all rights reserved).

  14. Environmental technologies of woody crop production systems

    Science.gov (United States)

    Ronald S. Zalesny Jr.; John A. Stanturf; Emile S. Gardiner; Gary S. Ba??uelos; Richard A. Hallett; Amir Hass; Craig M. Stange; James H. Perdue; Timothy M. Young; David R. Coyle; William L. Headlee

    2016-01-01

    Soil erosion, loss of productivity potential, biodiversity loss, water shortage, and soil and water pollution are ongoing processes that decrease or degrade provisioning (e.g., biomass, freshwater) and regulating (e.g., carbon sequestration, soil quality) ecosystem services. Therefore, developing environmental technologies that maximize these services is essential for...

  15. Intrinsic motivation, norms and environmental behaviour : The dynamics of overarching goals

    NARCIS (Netherlands)

    Steg, L.; Lindenberg, S.M.; Keizer, K.

    2016-01-01

    The understanding, prediction, and encouragement of pro-environmental behaviour (i.e., behaviour that impacts the environment as little as possible) depend to a large extent on understanding the motivational dynamics of pro-environmental behaviour. In this review paper, we discuss the state of the

  16. Environmental impacts of cultured meat production.

    Science.gov (United States)

    Tuomisto, Hanna L; de Mattos, M Joost Teixeira

    2011-07-15

    Cultured meat (i.e., meat produced in vitro using tissue engineering techniques) is being developed as a potentially healthier and more efficient alternative to conventional meat. Life cycle assessment (LCA) research method was used for assessing environmental impacts of large-scale cultured meat production. Cyanobacteria hydrolysate was assumed to be used as the nutrient and energy source for muscle cell growth. The results showed that production of 1000 kg cultured meat requires 26-33 GJ energy, 367-521 m(3) water, 190-230 m(2) land, and emits 1900-2240 kg CO(2)-eq GHG emissions. In comparison to conventionally produced European meat, cultured meat involves approximately 7-45% lower energy use (only poultry has lower energy use), 78-96% lower GHG emissions, 99% lower land use, and 82-96% lower water use depending on the product compared. Despite high uncertainty, it is concluded that the overall environmental impacts of cultured meat production are substantially lower than those of conventionally produced meat.

  17. Environmentally-friendly product development: methods and tools

    National Research Council Canada - National Science Library

    Abele, Eberhard; Anderl, R; Birkhofer, Herbert

    2005-01-01

    ... to assess a product's environmental effects. Fig. 1. Vision of Environment as a key target for product development vvi Preface Product related environmental issues are getting more and more political and public awareness. Development of environmentally friendly products has become an action item for both, politics and industry (UNFCCC 1997). Energy...

  18. Environmental protection: Streamlining petroleum exploration and production

    International Nuclear Information System (INIS)

    Hunt, A.M.

    1991-01-01

    The petroleum industry is inherently subject to a tremendous degree of volatility through fluctuation in world market prices and vagaries of world politics. A more recent stressful demand on the existing domestic petroleum exploration and production system has been the burgeoning number of environmental regulations imposed on this segment of the industry. Prudent and acceptable oil-field practices must now include agency-regulated environmental protection measures. Many independent producers are unfamiliar not only with the regulatory agencies, but also with the jargon and ambiguities, of regulations that very widely from state to state. Whereas some companies perceive only the restrictions and added cost of regulatory compliance, other companies have sought to optimize benefits while minimizing financial burdens by approaching this modern necessity more creatively, thereby discovering numerous means to become even more competitive. The domestic oil field of the 1990s will be increasingly affected by environmental regulation and public opinion. A number of companies have taken a proactive position on environmental issues. Industry examples include Louisiana Land and Exploration Company's history of wetlands conservation and Chevron's SMART (Save Money and Reduce Toxics). The future of the quality of life of this nation, and indeed the planet as a whole, lies in our capability to deal concurrently with the issues of a petroleum-based economy while protecting the natural environment that sustains life

  19. A goal programming approach for a joint design of macroeconomic and environmental policies: a methodological proposal and an application to the Spanish economy.

    Science.gov (United States)

    André, Francisco J; Cardenete, M Alejandro; Romero, Carlos

    2009-05-01

    The economic policy needs to pay increasingly more attention to the environmental issues, which requires the development of methodologies able to incorporate environmental, as well as macroeconomic, goals in the design of public policies. Starting from this observation, this article proposes a methodology based upon a Simonian satisficing logic made operational with the help of goal programming (GP) models, to address the joint design of macroeconomic and environmental policies. The methodology is applied to the Spanish economy, where a joint policy is elicited, taking into consideration macroeconomic goals (economic growth, inflation, unemployment, public deficit) and environmental goals (CO(2), NO( x ) and SO( x ) emissions) within the context of a computable general equilibrium model. The results show how the government can "fine-tune" its policy according to different criteria using GP models. The resulting policies aggregate the environmental and the economic goals in different ways: maximum aggregate performance, maximum balance and a lexicographic hierarchy of the goals.

  20. Peat 2003. Production, use, environmental impact

    International Nuclear Information System (INIS)

    2004-01-01

    This report discusses the use of peat for energy production and other purposes, laws and other regulations affecting peat production and use, environmental impact, market situation and international statistics regarding peat production. In Sweden, the extraction and use of peat for energy production is regulated by several laws. Harvesting concessions must be approved by the county council. All combustion plants must be reported, or verified by regional or central authorities, depending on the size of the plant. Most important in this process is to verify the maximum emission levels permitted for sulphur, nitrogen oxides, particles, etc. Since 1991, a law on municipal energy planning requires descriptions of environmental consequences. Thus, environmental considerations must govern energy planning. Energy taxation in Sweden was changed in 1993. At present, the sulphur tax on fuel peat amounts to SEK 30 per kg of sulphur. Nitrogen oxides are also subject to a tax of SEK 40 per emitted kg. For peat, energy and environmental taxes total SEK 0.02 per kWh, excluding VAT. Peat harvesting for the production of energy aroused interest in the early 1980s as a consequence of the increased energy prices. In 2003, about 2,628,000 cubic metres of fuel peat were harvested in Sweden. The fuel peat is used mainly for production of hot water in district heating plants. In 2003, the total use of fuel peat amounted to 4,0 TWh. In addition to fuel peat, about 1,825,000 cubic metres of peat litter (mainly for horticultural use) was produced. In 2003, imports amounted to 382,3000 metric tons or 1.3 million cubic metres of peat. Exports amounted to 103,000 metric tons, consisting primarily of peat for horticultural use. The peat market in Sweden is divided into the energy market and the cultivation market. Political decisions regarding combustion taxes have a great impact on the competitive advantages of different fuels. The major competitors to peat are coal, oil, and renewable energy

  1. Environmental Priorities In Strategic Product Development

    DEFF Research Database (Denmark)

    Simon, M; Poole, S.; Sweatman, A.

    2000-01-01

    -design framework consisting of analyse, report, prioritize and improve steps, at both strategic and operational levels. Tests the framework by application in an Electrolux subsidiary producing vacuum cleaners, tabulates LCA results for one product and its constituents and components. Concludes that prioritizing......Reports progress of the Design for Environmental Decision Support (DEEDS) project, gives the project's aim as the development of appropriate tools and methods for eco-design for use in the electrical/electronics sector. Bases development of the tools and methods on the results of a survey of 19...

  2. Environmental impact assessment of conventional and organic milk production

    NARCIS (Netherlands)

    Boer, de I.J.M.

    2003-01-01

    Organic agriculture addresses the public demand to diminish environmental pollution of agricultural production. Until now, however, only few studies tried to determine the integrated environmental impact of conventional versus organic production using life cycle assessment (LCA). The aim of this

  3. Achieving Our Environmental Sustainability Goals: The Opportunities and Pitfalls of Applying Life Cycle Thinking

    Science.gov (United States)

    An increasing number of people around the world are beginning to realize that a systems approach, such as life cycle thinking, is necessary to truly achieve environmental sustainability. Without the holistic perspective that life cycle thinking provides, our actions risk leading ...

  4. Potential role of phosphate buffering capacity of soils in fertilizer management strategies fitted to environmental goals

    NARCIS (Netherlands)

    Ehlert, P.A.I.; Morel, C.; Fotyma, M.; Destain, J.P.

    2003-01-01

    Sorption behavior and buffering of phosphorus (P) are important, both from an agricultural and an environmental point of view. The objectives of this study were to investigate: (1) the kinetics of the transfer of P from soil to soil solution and assessing P buffering capacity of soils (PBC), as a

  5. Corn-based ethanol production compromises goal of reducing nitrogen export by the Mississippi River.

    Science.gov (United States)

    Donner, Simon D; Kucharik, Christopher J

    2008-03-18

    Corn cultivation in the United States is expected to increase to meet demand for ethanol. Nitrogen leaching from fertilized corn fields to the Mississippi-Atchafalaya River system is a primary cause of the bottom-water hypoxia that develops on the continental shelf of the northern Gulf of Mexico each summer. In this study, we combine agricultural land use scenarios with physically based models of terrestrial and aquatic nitrogen to examine the effect of present and future expansion of corn-based ethanol production on nitrogen export by the Mississippi and Atchafalaya Rivers to the Gulf of Mexico. The results show that the increase in corn cultivation required to meet the goal of 15-36 billion gallons of renewable fuels by the year 2022 suggested by a recent U.S. Senate energy policy would increase the annual average flux of dissolved inorganic nitrogen (DIN) export by the Mississippi and Atchafalaya Rivers by 10-34%. Generating 15 billion gallons of corn-based ethanol by the year 2022 will increase the odds that annual DIN export exceeds the target set for reducing hypoxia in the Gulf of Mexico to >95%. Examination of extreme mitigation options shows that expanding corn-based ethanol production would make the already difficult challenges of reducing nitrogen export to the Gulf of Mexico and the extent of hypoxia practically impossible without large shifts in food production and agricultural management.

  6. Environmental Performance of Kettle Production: Product Life Cycle Assessment

    Science.gov (United States)

    Marcinkowski, Andrzej; Zych, Krzysztof

    2017-12-01

    The main objective of this paper is to compare the environmental impact caused by two different types of water boiling processes. The aim was achieved thanks to product life cycle assessment (LCA) conducted for stovetop and electric kettles. A literature review was carried out. A research model was worked out on the basis of data available in literature as well as additional experiments. In order to have a better opportunity to compare LCA results with reviewed literature, eco-indicator 99 assessment method was chosen. The functional unit included production, usage and waste disposal of each product (according to from cradle to grave approach) where the main function is boiling 3360 l of water during 4-year period of time. A very detailed life cycle inventory was carried out. The mass of components was determined with accuracy of three decimal places (0.001 g). The majority of environmental impact is caused by electricity or natural gas consumption during usage stage: 92% in case of the electric and kettle and 99% in case of stovetop one. Assembly stage contributed in 7% and 0.8% respectively. Uncertainty and sensitivity analyses took into consideration various waste scenario patterns as well as demand for transport. Environmental impact turned out to be strongly sensitive to a chosen pattern of energy delivery (electricity mix) which determined final comparison results. Basing on LCA results, some improvements of products were suggested. The boiling time optimization was pointed out for electric kettle's efficiency improvement. Obtained results can be used by manufacturers in order to improve their eco-effectiveness. Moreover, conclusions following the research part can influence the future choices of home appliances users.

  7. ENVIRONMENTAL PERFORMANCE OF KETTLE PRODUCTION: PRODUCT LIFE CYCLE ASSESSMENT

    Directory of Open Access Journals (Sweden)

    Andrzej MARCINKOWSKI

    2017-10-01

    Full Text Available The main objective of this paper is to compare the environmental impact caused by two different types of water boiling processes. The aim was achieved thanks to product life cycle assessment (LCA conducted for stovetop and electric kettles. A literature review was carried out. A research model was worked out on the basis of data available in literature as well as additional experiments. In order to have a better opportunity to compare LCA results with reviewed literature, eco-indicator 99 assessment method was chosen. The functional unit included production, usage and waste disposal of each product (according to from cradle to grave approach where the main function is boiling 3360 l of water during 4- year period of time. A very detailed life cycle inventory was carried out. The mass of components was determined with accuracy of three decimal places (0.001 g. The majority of environmental impact is caused by electricity or natural gas consumption during usage stage: 92% in case of the electric and kettle and 99% in case of stovetop one. Assembly stage contributed in 7% and 0.8% respectively. Uncertainty and sensitivity analyses took into consideration various waste sce-nario patterns as well as demand for transport. Environmental impact turned out to be strongly sensitive to a chosen pattern of energy delivery (electricity mix which determined final comparison results. Basing on LCA results, some im-provements of products were suggested. The boiling time optimization was pointed out for electric kettle's efficiency improvement. Obtained results can be used by manufacturers in order to improve their eco-effectiveness. Moreover, conclusions following the research part can influence the future choices of home appliances users.

  8. Forest-Industry of the Future; Industrial Partnerships: Advancing Energy and Environmental Goals

    International Nuclear Information System (INIS)

    DOE Office of Industrial Technologies

    2001-01-01

    This tri-fold brochure describe the partnering activities of the Office of Industrial Technologies' (OIT) Industries of the Future (IOF) for Forest Products. Information on what works for the Forest Products industry, examples of successful partnerships, and benefits of partnering with OIT are included

  9. Environmental assessment of electrochromic glazing production

    International Nuclear Information System (INIS)

    Syrrakou, E.; Papaefthimiou, S.; Yianoulis, P.

    2005-01-01

    The life cycle analysis method was used to determine the environmental impacts associated with the production of an electrochromic (EC) glazing (called ECD). This paper describes the inventory analysis for all the basic materials used during the manufacture of the ECD, i.e. K-Glass, tungsten oxide (WO 3 ), poly-methyl methacrylate (PMMA), propylene carbonate (PC), lithium perchlorate (LiClO 4 ) and acetic silicone sealant. K-Glass, PC and PMMA account for the 98% of the total device mass and the CO 2 emissions during their production processes are 810 g. The total embodied energy was estimated to be 49 MJ/ECD, with 32.1 MJ/unit of them derived from the K-Glass. The comparison of the total embodied energies of the ECD and various insulating glass units concluded that mass-produced EC glazings could easily compete with them in terms of environmental performance, anticipating cost attenuation and overall thermal and optical behavior. The above analysis could be implemented for the reduction of the embodied energy of the ECD life cycle, since it is proposed as an energy saving device. (Author)

  10. Demand-Side Management and European environmental and energy goals. An optimal complementary approach

    International Nuclear Information System (INIS)

    Bergaentzle, Claire; Clastres, Cedric; Khalfallah, Haikel

    2013-12-01

    Demand side management (DSM) in electricity markets could improve energy efficiency and achieve environmental targets through controlled consumption. For the past 10 years or so DSM programs have registered significant results. However, detailed analysis of its real impact as observed by a large number of pilot studies suggests that such programs need to be fine-tuned to suit clearly identified conditions. This study aims to provide recommendations for the instruments to be used to prompt demand response with a view to maximizing energy and environmental efficiencies of various countries. The present study suggests that different DSM models should be deployed depending on the specific generation mix in any given country. Beside the natural benefits from cross-borders infrastructures, DSM improves the flexibility and reliability of the energy system, absorbing some shock on generation mix. We show efficiency increases with demand response but at a decreasing rate. So, according to rebound and report effects, simple DSM tools could be preferred. (authors)

  11. Coupling landscape water storage and supplemental irrigation to increase productivity and improve environmental stewardship in the US Midwest

    Science.gov (United States)

    Agriculture must expand production for a growing population while simultaneously reducing its environmental impacts. These goals need not be in tension with one another. Here we outline a vision for improving both the productivity and environmental performance of agriculture in the US Corn Belt. Mea...

  12. Demand-side management and European environmental and energy goals: An optimal complementary approach

    International Nuclear Information System (INIS)

    Bergaentzlé, Claire; Clastres, Cédric; Khalfallah, Haikel

    2014-01-01

    Demand side management (DSM) in electricity markets could improve energy efficiency and achieve environmental targets through controlled consumption. For the past 10 years or so DSM programmes have registered significant results. However, detailed analysis of its real impact as observed by a large number of pilot studies suggests that such programmes need to be fine-tuned to suit clearly identified conditions. This study aims to provide recommendations for the instruments to be used to prompt demand response with a view to maximizing energy and environmental efficiencies of various countries. The present study suggests that different DSM models should be deployed depending on the specific generation mix in any given country. Beside the natural benefits from cross-borders infrastructures, DSM improves the flexibility and reliability of the energy system, absorbing some shock on generation mix. We show efficiency increases with demand response but at a decreasing rate. So, according to rebound and report effects, simple DSM tools could be preferred. - Highlights: • Demand side management could improve energy and environmental efficiency. • Several instruments should be used to achieve significant load-shedding. • DSM models should be deployed depending on generation mix. • Efficiency increases with demand response but at a decreasing rate. • Rebound and report effects reduce positive impacts

  13. Groundwater availability study for Guam; goals, approach, products, and schedule of activities

    Science.gov (United States)

    Gingerich, Stephen B.; Jenson, John W.

    2010-01-01

    An expected significant population increase on Guam has raised concern about the sustainability of groundwater resources. In response, the U.S. Geological Survey (USGS), in collaboration with the University of Guam's Water and Environmental Research Institute of the Western Pacific (WERI) and with funding from the U.S. Marine Corps (USMC), is conducting a 3.5-year study to advance understanding of regional groundwater dynamics in the Northern Guam Lens Aquifer, provide a new estimate of groundwater recharge, and develop a numerical groundwater flow and transport model for northern Guam. Results of the study, including two USGS reports and a well database, will provide more reliable evaluations of the potential effects of groundwater production and help guide sustainable management of this critical resource.

  14. Developing an environmental compliance program for accelerator production of tritium

    International Nuclear Information System (INIS)

    Reynolds, R.W.; Roberts, J.S.; Dyer, K.W.; Shedrow, C.B.; Sheetz, S.O.; England, J.L.

    1998-01-01

    This paper addresses the development of an environmental program for a large proposed federal project currently in the preliminary design phase, namely, the accelerator production of tritium (APT) for the US Department of Energy (DOE). This project is complicated not only by its size ($3.5 to $4.5 billion) but also by its technical complexity and one-of-a-kind nature. This is further complicated by the fact that government projects are driven by budgets subject to public pressures and annual Congressional fiscal considerations, whereas private companies are driven by profits. The measure of success for a federal project such as the APT is based on level of public support, not profits. Finally, there are not too many equivalent environmental programs that could be used as models, and benchmarking is nearly impossible. Forming an environmental program during the conceptual design phase of this large federal project included the formation of a core environmental working group (EWG). The group has membership from all major project organizations with a charter formally recognized by the project director. The envelope for traditional environmental work for the APT project has been stretched to include teaming with management in the establishment of project goals and direction. The APT EWG was set up organizationally to include several subgroups or teams that do the real work of assessing, establishing the regulatory framework, and then developing a compliance program. Setting aside the organizational difficulties of selecting the right team leads and members, each team was tasked with developing a charter, plan, and schedule. Since then, each team has developed an appropriate level of supporting documentation to address its particular issues and requirements

  15. A nudge in a healthier direction: How environmental cues help restrained eaters pursue their weight-control goal.

    Science.gov (United States)

    Stämpfli, Aline E; Stöckli, Sabrina; Brunner, Thomas A

    2017-03-01

    Losing weight is a goal for many people, but it is hard to pursue. However, dieting cues in the environment hold promise for improving individuals' eating behavior. For example, exposure to thin, human-like sculptures by the artist Alberto Giacometti has been found to promote healthy snack choices at a vending machine. Whether health- or weight-related processes drive such effects has not yet been determined. However, a detailed understanding of the content-related drivers of environmental cues' effects provides the first indications regarding a cue's possible use. Therefore, two laboratory studies were conducted. They examined the Giacometti sculptures' effects on unhealthy and healthy food intake (Study 1) and on the completion of weight- and health-related fragmented words (Study 2). Study 1 indicated that the sculptures are weight-related by showing that they reduced food intake independent of food healthiness. Furthermore, the "Giacometti effect" was moderated by restrained eating. Restrained eaters, who are known for their weight-control goal, ate less after having been exposed to the thin sculptures. The results of Study 2 pointed in the same direction. Restrained eaters completed more weight-related words after being exposed to the sculptures. Overall, these studies suggest that the thin sculptures are primarily weight-related cues and particularly helpful for restrained eaters. Environmental weight-control cues such as the Giacometti sculptures could act as a counterforce to our obesogenic environment and help restrained eaters pursue their weight-control goal. In this way, they could nudge food decisions in a healthier direction. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Environmental policy and the energy efficiency of vertically differentiated consumer products

    International Nuclear Information System (INIS)

    Brzeskot, Magdalena; Haupt, Alexander

    2013-01-01

    We analyse optimal environmental policies in a market that is vertically differentiated in terms of the energy efficiency of products. Considering energy taxes, subsidies to firms for investment in more eco-friendly products, and product standards, we are particularly interested in how distributional goals in addition to environmental goals shape the choice of policy instruments. We find that an industry-friendly government levies an energy tax to supplement a lax product standard, but shies away from subsidies to firms. By contrast, a consumer-friendly government relies heavily on a strict product standard and additionally implements a moderate subsidy to firms, but avoids energy taxes. - Highlights: ► We analyse how distributional goals shape environmental policy. ► Firms invest in the energy efficiency of their products and compete in prices. ► An industry-friendly government implements an energy tax and a lax product standard. ► A consumer-friendly government chooses a subsidy to firms instead of an energy tax. ► A consumer-friendly government implements a strict energy efficiency standard

  17. EPD--environmental product declarations for wood products : an application of life cycle information about forest products

    Science.gov (United States)

    Richard Bergman; Adam Taylor

    2011-01-01

    Transparent and credible environmental labeling of products is vital for a sustainable future. Ecolabeling shows information on the environmental performance of products, processes, and services. This article focuses on one type of ecolabeling referred to as environmental product declarations (EPDs) that provide environmental impact information based on life cycle...

  18. An environmental generalised Luenberger-Hicks-Moorsteen productivity indicator and an environmental generalised Hicks-Moorsteen productivity index.

    Science.gov (United States)

    Abad, A

    2015-09-15

    The purpose of this paper is to introduce an environmental generalised productivity indicator and its ratio-based counterpart. The innovative environmental generalised total factor productivity measures inherit the basic structure of both Hicks-Moorsteen productivity index and Luenberger-Hicks-Moorsteen productivity indicator. This methodological contribution shows that these new environmental generalised total factor productivity measures yield the earlier standard Hicks-Moorsteen index and Luenberger-Hicks-Moorsteen indicator, as well as environmental performance index, as special cases. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. Signalling product healthiness through symbolic package cues: Effects of package shape and goal congruence on consumer behaviour.

    Science.gov (United States)

    van Ooijen, Iris; Fransen, Marieke L; Verlegh, Peeter W J; Smit, Edith G

    2017-02-01

    Three studies show that product packaging shape serves as a cue that communicates healthiness of food products. Inspired by embodiment accounts, we show that packaging that simulates a slim body shape acts as a symbolic cue for product healthiness (e.g., low in calories), as opposed to packaging that simulates a wide body shape. Furthermore, we show that the effect of slim package shape on consumer behaviour is goal dependent. Whereas simulation of a slim (vs. wide) body shape increases choice likelihood and product attitude when consumers have a health-relevant shopping goal, packaging shape does not affect these outcomes when consumers have a hedonic shopping goal. In Study 3, we adopt a realistic shopping paradigm using a shelf with authentic products, and find that a slim (as opposed to wide) package shape increases on-shelf product recognition and increases product attitude for healthy products. We discuss results and implications regarding product positioning and the packaging design process. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Integrating human and environmental health in antibiotic risk assessment: A critical analysis of protection goals, species sensitivity and antimicrobial resistance.

    Science.gov (United States)

    Le Page, Gareth; Gunnarsson, Lina; Snape, Jason; Tyler, Charles R

    2017-12-01

    Antibiotics are vital in the treatment of bacterial infectious diseases but when released into the environment they may impact non-target organisms that perform vital ecosystem services and enhance antimicrobial resistance development with significant consequences for human health. We evaluate whether the current environmental risk assessment regulatory guidance is protective of antibiotic impacts on the environment, protective of antimicrobial resistance, and propose science-based protection goals for antibiotic manufacturing discharges. A review and meta-analysis was conducted of aquatic ecotoxicity data for antibiotics and for minimum selective concentration data derived from clinically relevant bacteria. Relative species sensitivity was investigated applying general linear models, and predicted no effect concentrations were generated for toxicity to aquatic organisms and compared with predicted no effect concentrations for resistance development. Prokaryotes were most sensitive to antibiotics but the range of sensitivities spanned up to several orders of magnitude. We show reliance on one species of (cyano)bacteria and the 'activated sludge respiration inhibition test' is not sufficient to set protection levels for the environment. Individually, neither traditional aquatic predicted no effect concentrations nor predicted no effect concentrations suggested to safeguard for antimicrobial resistance, protect against environmental or human health effects (via antimicrobial resistance development). Including data from clinically relevant bacteria and also more species of environmentally relevant bacteria in the regulatory framework would help in defining safe discharge concentrations for antibiotics for patient use and manufacturing that would protect environmental and human health. It would also support ending unnecessary testing on metazoan species. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  1. Environmental effect of constructed wetland as biofuel production system

    Science.gov (United States)

    Liu, Dong

    2017-04-01

    Being as a renewable energy, biofuel has attracted worldwide attention. Clean biofuel production is an effective way to mitigate global climate change and energy crisis. Biofuel may offer a promising alternative to fossil fuels, but serious concerns arise about the adverse greenhouse gas consequences from using nitrogen fertilizers. Waste-nitrogen recycling is an attractive idea. Here we advocate a win-win approach to biofuel production which takes advantage of excessive nitrogen in domestic wastewater treated via constructed wetland (CW) in China. This study will carry on environmental effect analysis of CW as a biomass generation system through field surveys and controllable simulated experiments. This study intends to evaluate net energy balance, net greenhouse effect potential and ecosystem service of CW as biomass generation system, and make comparation with traditional wastewater treatment plant and other biofuel production systems. This study can provide a innovation mode in order to solve the dilemma between energy crops competed crops on production land and excessive nitrogen fertilizer of our traditional energy plant production. Data both from our experimental CWs in China and other researches on comparable CWs worldwide showed that the biomass energy yield of CWs can reach 182.3 GJ ha-1 yr-1, which was two to eight times higher than current biofuel-production systems. Energy output from CW was ˜137% greater than energy input for biofuel production. If CWs are designed with specific goal of biofuel production, biofuel production can be greatly enhanced through the optimization of N supply, hydraulic structures, and species selection in CWs. Assuming that 2.0 Tg (1 Tg = 1012 g) waste nitrogen contained in domestic wastewater is treated by CWs, biofuel production can account for 1.2% of national gasoline consumption in China. The proportion would increase to 6.7% if extra nitrogen (9.5 Tg) from industrial wastewater and agricultural runoff was included

  2. Exporting environmental products: A small business's perspective

    International Nuclear Information System (INIS)

    Marsh, K.

    1992-01-01

    If the last year and a half are any indication it would appear that the early 1990's will be to international trade what the early 1980's were to entrepreneurship. Embraced by the popular and business press and encouraged by the administration, exporting has become one of the most talked about topics in business today. As manufacturers, consultants and service providers we are continually told that to survive in the world marketplace we must think globally and compete aggressively. There can be no doubt that export markets, always an interesting sector of business, have become both more important and exciting in recent years. On January 1, 1993 the unified common market of the European Community will officially open for business. Although most of the significant changes in that market have already taken place or been agreed upon, this historic event - creating the single largest market among industrial nations - will undoubtedly have an effect on how we as exporters do business in Europe. The Free Trade Agreement with Canada has been in effect for over two years now and there have been and will continue to be many benefits for us. In developing and newly capitalist countries we can point to Czechoslovakia and Hungary as the first of several potentially lucrative markets. Mexico, in the spotlight due to the new Free Trade initiative, will be a strong new export market in our own backyard. And finally the so called mini-dragons of Southeast Asia cannot be ignored. Whether or not they choose to create a formal trading bloc, their ever increasing foreign reserves should be looked at with hungry, but cautious eyes. In this paper the author identifies a large and ever increasing world of customers beyond our national borders and identifies how those companies and individuals in the environmental products market can benefit greatly

  3. Development of a framework based on an ecosystem services approach for deriving specific protection goals for environmental risk assessment of pesticides

    International Nuclear Information System (INIS)

    Nienstedt, Karin M.; Brock, Theo C.M.; Wensem, Joke van; Montforts, Mark; Hart, Andy; Aagaard, Alf; Alix, Anne; Boesten, Jos; Bopp, Stephanie K.; Brown, Colin; Capri, Ettore; Forbes, Valery; Köpp, Herbert; Liess, Matthias; Luttik, Robert; Maltby, Lorraine

    2012-01-01

    General protection goals for the environmental risk assessment (ERA) of plant protection products are stated in European legislation but specific protection goals (SPGs) are often not precisely defined. These are however crucial for designing appropriate risk assessment schemes. The process followed by the Panel on Plant Protection Products and their Residues (PPR) of the European Food Safety Authority (EFSA) as well as examples of resulting SPGs obtained so far for environmental risk assessment (ERA) of pesticides is presented. The ecosystem services approach was used as an overarching concept for the development of SPGs, which will likely facilitate communication with stakeholders in general and risk managers in particular. It is proposed to develop SPG options for 7 key drivers for ecosystem services (microbes, algae, non target plants (aquatic and terrestrial), aquatic invertebrates, terrestrial non target arthropods including honeybees, terrestrial non-arthropod invertebrates, and vertebrates), covering the ecosystem services that could potentially be affected by the use of pesticides. These SPGs need to be defined in 6 dimensions: biological entity, attribute, magnitude, temporal and geographical scale of the effect, and the degree of certainty that the specified level of effect will not be exceeded. In general, to ensure ecosystem services, taxa representative for the key drivers identified need to be protected at the population level. However, for some vertebrates and species that have a protection status in legislation, protection may be at the individual level. To protect the provisioning and supporting services provided by microbes it may be sufficient to protect them at the functional group level. To protect biodiversity impacts need to be assessed at least at the scale of the watershed/landscape. - Research highlights: ► How to define specific protection goals (SPGs) for environmental risk assessment? ► The process uses the ecosystem services (ES

  4. The regional environmental impact of biomass production

    International Nuclear Information System (INIS)

    Graham, R.L.

    1994-01-01

    The objective of this paper is to present a broad overview of the potential environmental impacts of biomass energy from energy crops. The subject is complex because the environmental impact of using biomass for energy must be considered in the context of alternative energy options while the environmental impact of producing biomass from energy crops must be considered in the context of the alternative land-uses. Using biomass-derived energy can reduce greenhouse gas emissions or increase them; growing biomass energy crops can enhance soil fertility or degrade it. Without knowing the context of the biomass energy, one can say little about its specific environmental impacts. The primary focus of this paper is an evaluation of the environmental impacts of growing energy crops. I present an approach for quantitatively evaluating the potential environmental impact of growing energy crops at a regional scale that accounts for the environmental and economic context of the crops. However, to set the stage for this discussion, I begin by comparing the environmental advantages and disadvantages of biomass-derived energy relative to other energy alternatives such as coal, hydropower, nuclear power, oil/gasoline, natural gas and photovoltaics

  5. Accelerator Production of Tritium Programmatic Environmental Impact Statement Input Submittal

    International Nuclear Information System (INIS)

    Miller, L.A.; Greene, G.A.; Boyack, B.E.

    1996-02-01

    The Programmatic Environmental Impact Statement for Tritium Supply and Recycling considers several methods for the production of tritium. One of these methods is the Accelerator Production of Tritium. This report summarizes the design characteristics of APT including the accelerator, target/blanket, tritium extraction facility, and the balance of plant. Two spallation targets are considered: (1) a tungsten neutron-source target and (2) a lead neutron-source target. In the tungsten target concept, the neutrons are captured by the circulating He-3, thus producing tritium; in the lead target concept, the tritium is produced by neutron capture by Li-6 in a surrounding lithium-aluminum blanket. This report also provides information to support the PEIS including construction and operational resource needs, waste generation, and potential routine and accidental releases of radioactive material. The focus of the report is on the impacts of a facility that will produce 3/8th of the baseline goal of tritium. However, some information is provided on the impacts of APT facilities that would produce smaller quantities

  6. Potential application of ecological models in the European environmental risk assessment of chemicals. I. Review of protection goals in EU directives and regulations.

    Science.gov (United States)

    Hommen, Udo; Baveco, J M Hans; Galic, Nika; van den Brink, Paul J

    2010-07-01

    Several European directives and regulations address the environmental risk assessment of chemicals. We used the protection of freshwater ecosystems against plant protection products, biocidal products, human and veterinary pharmaceuticals, and other chemicals and priority substances under the Water Framework Directive as examples to explore the potential of ecological effect models for a refined risk assessment. Our analysis of the directives, regulations, and related guidance documents lead us to distinguish the following 5 areas for the application of ecological models in chemical risk assessment: 1) Extrapolation of organism-level effects to the population level: The protection goals are formulated in general terms, e.g., avoiding "unacceptable effects" or "adverse impact" on the environment or the "viability of exposed species." In contrast, most of the standard ecotoxicological tests provide data only on organism-level endpoints and are thus not directly linked to the protection goals which focus on populations and communities. 2) Extrapolation of effects between different exposure profiles: Especially for plant protection products, exposure profiles can be very variable and impossible to cover in toxicological tests. 3) Extrapolation of recovery processes: As a consequence of the often short-term exposures to plant protection products, the risk assessment is based on the community recovery principle. On the other hand, assessments under the other directives assume a more or less constant exposure and are based on the ecosystem threshold principle. 4) Analysis and prediction of indirect effects: Because effects on 1 or a few taxa might have consequences on other taxa that are not directly affected by the chemical, such indirect effects on communities have to be considered. 5) Prediction of bioaccumulation within food chains: All directives take the possibility of bioaccumulation, and thus secondary poisoning within the food chain, into account. (c) 2010 SETAC.

  7. Movement goals and feedback and feedforward control mechanisms in speech production.

    Science.gov (United States)

    Perkell, Joseph S

    2012-09-01

    Studies of speech motor control are described that support a theoretical framework in which fundamental control variables for phonemic movements are multi-dimensional regions in auditory and somatosensory spaces. Auditory feedback is used to acquire and maintain auditory goals and in the development and function of feedback and feedforward control mechanisms. Several lines of evidence support the idea that speakers with more acute sensory discrimination acquire more distinct goal regions and therefore produce speech sounds with greater contrast. Feedback modification findings indicate that fluently produced sound sequences are encoded as feedforward commands, and feedback control serves to correct mismatches between expected and produced sensory consequences.

  8. Is an ecosystem services-based approach developed for setting specific protection goals for plant protection products applicable to other chemicals?

    Science.gov (United States)

    Maltby, Lorraine; Jackson, Mathew; Whale, Graham; Brown, A Ross; Hamer, Mick; Solga, Andreas; Kabouw, Patrick; Woods, Richard; Marshall, Stuart

    2017-02-15

    Clearly defined protection goals specifying what to protect, where and when, are required for designing scientifically sound risk assessments and effective risk management of chemicals. Environmental protection goals specified in EU legislation are defined in general terms, resulting in uncertainty in how to achieve them. In 2010, the European Food Safety Authority (EFSA) published a framework to identify more specific protection goals based on ecosystem services potentially affected by plant protection products. But how applicable is this framework to chemicals with different emission scenarios and receptor ecosystems? Four case studies used to address this question were: (i) oil refinery waste water exposure in estuarine environments; (ii) oil dispersant exposure in aquatic environments; (iii) down the drain chemicals exposure in a wide range of ecosystems (terrestrial and aquatic); (iv) persistent organic pollutant exposure in remote (pristine) Arctic environments. A four-step process was followed to identify ecosystems and services potentially impacted by chemical emissions and to define specific protection goals. Case studies demonstrated that, in principle, the ecosystem services concept and the EFSA framework can be applied to derive specific protection goals for a broad range of chemical exposure scenarios. By identifying key habitats and ecosystem services of concern, the approach offers the potential for greater spatial and temporal resolution, together with increased environmental relevance, in chemical risk assessments. With modifications including improved clarity on terminology/definitions and further development/refinement of the key concepts, we believe the principles of the EFSA framework could provide a methodical approach to the identification and prioritization of ecosystems, ecosystem services and the service providing units that are most at risk from chemical exposure. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights

  9. Consumer Response to Product-Integrated Energy Feedback: Behavior, Goal Level Shifts and Energy Conservation

    NARCIS (Netherlands)

    McCalley, L.T.; de Vries, Pieter Walter; Midden, Cees J.H.

    2011-01-01

    Results of recent experiments suggest that interactive control panels of individual appliances can be used to stimulate energy saving behavior by offering the means for consumers to set a goal and receive immediate energy use feedback. The underlying source of the behavioral response, however,

  10. Consumer response to product-integrated energy feedback : behavior, goal level shifts, and energy conservation

    NARCIS (Netherlands)

    McCalley, L.T.; Vries, de P.W.; Midden, C.J.H.

    2011-01-01

    Results of recent experiments suggest that interactive control panels of individual appliances can be used to stimulate energy saving behavior by offering the means for consumers to set a goal and receive immediate energy use feedback. The underlying source of the behavioral response, however,

  11. Environmental Management in Danish transnational textile product chains

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Jørgensen, Ulrik; Hendriksen, Kåre

    2010-01-01

    on capacity building at the suppliers in developing countries, while other companies seem to focus the complex activities at domestic suppliers. Two new facilitating actors in environmental management in product chains were identified. Research limitations and implications The focus on one sector in one......Purpose The purpose is to analyse environmental responsibility of companies from industrialized countries when they source materials and products in countries with less environmental protection. Methodology The article is a study of corporate environmental management in the Danish textile...... have a practice without environmental initiatives. Dominating types of initiatives are cleaner technology, environmental management systems and cleaner products. Driving forces are governmental regulation, customer demands, market expectations and protection of corporate brands. Some companies focus...

  12. Enhancing Environmental Communication and Products Through Qualitative Research

    Science.gov (United States)

    DeLorme, D.; Hagen, S. C.

    2014-12-01

    This presentation discusses two ongoing interdisciplinary case studies that are using qualitative research to design and enhance environmental communication and science products for outreach and decision making purposes. Both cases demonstrate the viability and practical value of qualitative social science methodology, specifically focus group interviews, to better understand the viewpoints of target audiences, improve deliverables, and support project goals. The first case is a NOAA-funded project to conduct process-based modeling to project impact from climate change in general and sea level rise in particular to the natural and built environment. The project spans the Mississippi, Alabama, and Florida Panhandle coasts with concentration on the three National Estuarine Research Reserves. As part of the broader project, four annual focus groups were conducted with a purposive sample of coastal resource managers to capture their perspectives and suggestions to better meet their informational and operational needs. The second case is a Florida Sea Grant-funded project that is developing, implementing, and testing a cohesive outreach campaign to promote voluntary careful and responsible recreational boating to help protect sensitive marine life and habitats (especially seagrasses and oyster reefs) in the Mosquito Lagoon. Six focus groups were conducted with a purposive sample of the target audience of boaters to gain insights, feedback, and ideas on the direction of the campaign and design of the messages and products. The campaign materials created include a branded website, Facebook page, mobile app, information packets, brochures, pledge forms, and promotional items. A comparison of these two case studies will be provided and will explain how the qualitative findings were/are being implemented to tailor and refine the respective communication strategies and techniques including the emerging outreach products. The resulting outcomes are messages and tools that are

  13. Environmental sustainability assessment of palm biodiesel production in Thailand

    International Nuclear Information System (INIS)

    Silalertruksa, Thapat; Gheewala, Shabbir H.

    2012-01-01

    The study assesses the environmental sustainability of palm biodiesel production systems in Thailand by focusing on their energy efficiency and environmental impact potentials. The Net Energy Balance (NEB) and Renewability indicate energy gain for palm biodiesel and its co-products as compared to fossil energy inputs. In addition, life cycle assessment also reveals lower values of environmental impact potentials of biodiesel as compared to conventional diesel. For example, palm biodiesel can provide greenhouse gas (GHG) reduction of around 46–73% as compared to diesel. Nitrogen-fertilizer production and application in the plantation and the air emissions from the ponds treating palm oil mill effluent (POME) are found to be the major environmental aspects. However, the energy and environmental performances depend on various factors such as the management efficiency of empty fruit bunches (EFB) and POME and the possible land-use change in the future. Recommendations are made for improving environmental performance of palm biodiesel and for securing the long-term availability of crude palm oil supply with a view towards sustainable palm biodiesel production. -- Highlights: ► Environmental sustainability of palm biodiesel production in Thailand is assessed. ► Palm biodiesel can provide GHG reduction of around 46–73% as compared to diesel. ► Net energy ratio and renewability of palm biodiesel both range between 2 and 4. ► Efficient use of by-products in the value chain enhances environmental benefits.

  14. Making environmental assessments of biomass production systems comparable worldwide

    International Nuclear Information System (INIS)

    Meyer, Markus A; Seppelt, Ralf; Priess, Joerg A; Witing, Felix

    2016-01-01

    Global demand for agricultural and forestry products fundamentally affects regional land-use change associated with environmental impacts (EIs) such as erosion. In contrast to aggregated global metrics such as greenhouse gas (GHG) balances, local/regional EIs of different agricultural and forestry production regions need methods which enable worldwide EI comparisons. The key aspect is to control environmental heterogeneity to reveal man-made differences of EIs between production regions. Environmental heterogeneity is the variation in biotic and abiotic environmental conditions. In the present study, we used three approaches to control environmental heterogeneity: (i) environmental stratification, (ii) potential natural vegetation (PNV), and (iii) regional environmental thresholds to compare EIs of solid biomass production. We compared production regions of managed forests and plantation forests in subtropical (Satilla watershed, Southeastern US), tropical (Rufiji basin, Tanzania), and temperate (Mulde watershed, Central Germany) climates. All approaches supported the comparison of the EIs of different land-use classes between and within production regions. They also standardized the different EIs for a comparison between the EI categories. The EIs for different land-use classes within a production region decreased with increasing degree of naturalness (forest, plantation forestry, and cropland). PNV was the most reliable approach, but lacked feasibility and relevance. The PNV approach explicitly included most of the factors that drive environmental heterogeneity in contrast to the stratification and threshold approaches. The stratification approach allows consistent global application due to available data. Regional environmental thresholds only included arbitrarily selected aspects of environmental heterogeneity; they are only available for few EIs. Especially, the PNV and stratification approaches are options to compare regional EIs of biomass or crop production

  15. Comparative Analysis of Environmental Impacts of Selected Products

    Directory of Open Access Journals (Sweden)

    A. Fedoryszyn

    2013-01-01

    Full Text Available The purpose of the present study is to demonstrate that environmental impacts exerted by manufactured products throughout their entire life cycle are major aspects to be considered, alongside their functional features and cost-effectiveness. One of the available methods to evaluate environmental impacts is known to as the Life Cycle Assessment (LCA method.The study summarises the reports from the literature on the subject of environmental impact assessment. In conclusions, the authorsindicate the need for assessing the environmental impact of cast products made from conventional and newly introduced alloys.

  16. Comparative Analysis of Environmental Impacts of Selected Products

    Directory of Open Access Journals (Sweden)

    Fedoryszyn A.

    2013-03-01

    Full Text Available The purpose of the present study is to demonstrate that environmental impacts exerted by manufactured products throughout their entire life cycle are major aspects to be considered, alongside their functional features and cost-effectiveness. One of the available methods to evaluate environmental impacts is known to as the Life Cycle Assessment (LCA method. The study summarises the reports from the literature on the subject of environmental impact assessment. In conclusions, the authors indicate the need for assessing the environmental impact of cast products made from conventional and newly introduced alloys.

  17. Environmental improvement through product development - in Japanese

    DEFF Research Database (Denmark)

    McAloone, Tim C.; Bey, Niki

    Companies in Denmark and abroad are working increasingly to reduce human impacts on the environment and nature. At the same time there must still be a large focus on the creation of value for customers and consumers. This development gives rise to a huge potential for Danish companies, to create ...... Environmental Protection Agency’s company funding scheme. We hope you will be inspired!...

  18. Microalgae for biofuels production and environmental applications ...

    African Journals Online (AJOL)

    This review presents the current classification of biofuels, with special focus on microalgae and their applicability for the production of biodiesel. The paper considered issues related with the processing and culturing of microalgae, for not only those that are involved in biofuel production, but as well as the possibility of their ...

  19. Different accounting approaches to harvested wood products in national greenhouse gas inventories: their incentives to achievement of major policy goals

    International Nuclear Information System (INIS)

    Hashimoto, Seiji

    2008-01-01

    The 2006 IPCC Guidelines for National Greenhouse Gas Inventories provide four accounting approaches to harvested wood products (HWP). These differ in the way they define system boundaries. Therefore, reported national carbon emissions differ according to the accounting approach used, and the implications of each accounting approach differ for different countries. This paper investigates four IPCC accounting approaches, as well as the 1996 IPCC default approach, to determine whether they provide incentives to achievement of major policy goals related to climate, forest, trade, and waste, taking into account indirect effects of wood use change (i.e., the effects on forest carbon stocks and on carbon emissions from the use of other fuels and materials). Conclusions are as follows: (1) The analyses produced many different results from those of previous studies. These differences appear to be attributable to whether or not the indirect effects of wood use change are taken into account and the reference scenarios that are assumed; (2) The best approaches for achieving each policy goal differ, and the best approaches for particular policy goals might pose problems for other policy goals; (3) Overall, the IPCC default approach is the best accounting approach from the viewpoint of greater compatibility with, or integration across, the array of policy goals, although it does not address the issue of an increasing global carbon stock in HWP

  20. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: DUST SUPPRESSANT PRODUCTS: SYNTECH PRODUCTS CORPORATION'S PETROTAC

    Science.gov (United States)

    Dust suppressant products used to control particulate emissions from unpaved roads are among the technologies evaluated by the Air Pollution Control Technology (APCT) Verification Center, part of the U.S. Environmental Protection Agency's Environmental Technology Verification (ET...

  1. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: DUST SUPPRESSANT PRODUCTS: SYNTECH PRODUCTS CORPORATION'S TECHSUPPRESS

    Science.gov (United States)

    Dust suppressant products used to control particulate emissions from unpaved roads are among the technologies evaluated by the Air Pollution Control Technology (APCT) Verification Center, part of the U.S. Environmental Protection Agency's Environmental Technology Verification (ET...

  2. Strategic environmental assessment for energy production

    International Nuclear Information System (INIS)

    Jay, Stephen

    2010-01-01

    Amongst the approaches that have developed to improve environmental protection within the energy sector, strategic environmental assessment (SEA) has received relatively little attention. This is despite its potential to overcome some of the shortcomings associated with project-level assessment by intervening at higher levels of energy system planning. In this article, a review is presented of the extent to which SEA has been adopted and otherwise promoted in strategic energy planning processes in a wide range of countries throughout the world (with an emphasis on European Union nations). In this regard, the growing importance of regulatory compliance is underlined, especially within the EU, with a particular focus upon the application of SEA to grid systems. The case of the Belgian transmission system is described, illustrating a proactive approach to SEA. But the difficulties inherent in introducing SEA to an increasingly fragmented and liberalised sector are also drawn out, leading to suggestions by which these difficulties may be addressed.

  3. MANAGING JOINT PRODUCTION MOTIVATION : THE ROLE OF GOAL FRAMING AND GOVERNANCE MECHANISMS

    NARCIS (Netherlands)

    Lindenberg, Siegwart; Foss, Nicolai J.

    We contribute to the microfoundations of organizational performance by proffering the construct of joint production motivation. Under such motivational conditions individuals see themselves as part of a joint endeavor, each with his or her own roles and responsibilities; generate shared

  4. The Influence of Consumer Goals and Marketing Activities on Product Bundling

    Science.gov (United States)

    Haijun, Wang

    Upon entering a store, consumers are faced with the questions of whether to buy, what to buy, and how much to buy. Consumers include products from different categories in their decision process. Product categories can be related in different ways. Product bundling is a process that involves the choice of at least two non-substitutable items. In this research, the consumers' explicit product bundling activity at the point of sale is focused. We focuses on the retailers' perspective and therefore leaves out consumers' brand choice decisions, concentrating on purchase incidence and quantity. At the base of the current model of the exist researches, we integrate behavioural choice analysis and predictive choice modelling through the underlying behavioural models, called random utility maximization (RUM) models. The methodological contribution of this research lies therein to combine a nested logit choice model with a latent variable factor model. We point out several limitations for both theory and practice at the end.

  5. ENVIRONMENTAL CONCERN TO ATTITUDE TOWARDS GREEN PRODUCTS: EVIDENCES FROM INDIA

    Directory of Open Access Journals (Sweden)

    Mohd Danish Kirmani

    2016-11-01

    Full Text Available The purpose of this paper is to explore the relationship of environmental concern of consumers with their attitude towards green products and also to identify the predictors of environmental concern. The data was generated from a researcher controlled sample of graduate and post-graduate students enrolled in educational institutions located in the national capital of India (New Delhi and surrounding areas popularly known as National Capital Region (NCR. The data generated was analysed employing Structural Equation Modelling (SEM. The study findings indicate that environmental concern has a significant and positive influence on attitude towards green products. Collectivism and eco-literacy emerged as predictors of the environmental concern of consumers. The findings of this study are expected to enhance the understanding of marketers of the role played by variables such as religiosity, collectivism, eco-literacy, and environmental concern in formation of attitude of consumers towards green products.

  6. Assessment of environmental external effects in the production of energy

    DEFF Research Database (Denmark)

    Schleisner, L.; Meyer, H.J.; Morthorst, P.E.

    1995-01-01

    A project in Denmark has been carried out with the purpose to assess the environmental damages and the external costs in the production of energy. The energy production technologies that will be reported in this paper are wind power and a conventional coal fired plant. In the project the environm......A project in Denmark has been carried out with the purpose to assess the environmental damages and the external costs in the production of energy. The energy production technologies that will be reported in this paper are wind power and a conventional coal fired plant. In the project...... the environmental damages for the energy production technologies are compared, and externalities in the production of energy using renewable energy and fossil fuels are identified, estimated and monetized....

  7. Consumer Purchase Behaviour Toward Environmentally Friendly Products in Japan

    OpenAIRE

    Udo, Miyako

    2007-01-01

    This study considers consumer purchase behaviour toward environmentally friendly products in Japan and focuses on factors which can influence environmentally responsible purchase decision making. The modified theory of planned behaviour based on previous research in the area of environmentally responsible purchase behaviour and ethical purchase decision making is applied to examine factors affecting the purchase decision making and key findings from the present study are highlighted. It can b...

  8. Oil and Gas Production, Environmental Health and Livelihood ...

    African Journals Online (AJOL)

    Oil and Gas Production, Environmental Health and Livelihood Vulnerability in the West Coast of Ghana. ... African Journal of Sustainable Development ... Respondents' level of education significantly influences their level of knowledge about ...

  9. Environmental implications of accelerated gasohol production: preliminary assessment

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    This report assesses the environmental impacts of increasing US production of fuel ethanol by 330 million gallons per year in the 1980 to 1981 time frame in order to substitute gasohol for 10% of the unleaded gasoline consumed in the United States. Alternate biomass feedstocks are examined and corn is selected as the most logical feedstock, based on its availability and cost. Three corn conversion processes that could be used to attain the desired 1980 to 1981 production are identified; fermentation plants that use a feedstock of starch and wastes from an adjacent corn refining plants are found to have environmental and economic advantages. No insurmountable environmental problems can be achieved using current technology; the capital and operating costs of this control are estimated. If ethanol production is increased substantially after 1981, the environmentally acceptable use or disposal of stillage, a liquid by-product of fermentation, could become a serious problem.

  10. Voluntary Tools Of The Environmental Oriented Product Policy

    Directory of Open Access Journals (Sweden)

    Rusko Miroslav

    2015-06-01

    Full Text Available Environmentally oriented product policy is in general determined by the relationships between its aims – subjects – objects - tools. It is based on the integrated approach to the product life cycle, which anticipates an enormous amount of information. It has to solve the questions of the international trade as well as the rules of the International Trade Organization. New forms of preventive environmental strategies and especially Green Marketing are being introduced helping to solve environmental problems and environmental motivation of producers. Many producers face great attention of the public regarding their approach to the environment. Despite the fact that the customers buy products fairly prudently and their behaviour is markedly affected by prices, a particular part of the population prefers the products that do not burden the environment. This brings about a situation, in which the producers within their mutual competition and in relation to customers are enforced to behave responsibly.

  11. Voluntary Tools Of The Environmental Oriented Product Policy

    Science.gov (United States)

    Rusko, Miroslav

    2015-06-01

    Environmentally oriented product policy is in general determined by the relationships between its aims - subjects - objects - tools. It is based on the integrated approach to the product life cycle, which anticipates an enormous amount of information. It has to solve the questions of the international trade as well as the rules of the International Trade Organization. New forms of preventive environmental strategies and especially Green Marketing are being introduced helping to solve environmental problems and environmental motivation of producers. Many producers face great attention of the public regarding their approach to the environment. Despite the fact that the customers buy products fairly prudently and their behaviour is markedly affected by prices, a particular part of the population prefers the products that do not burden the environment. This brings about a situation, in which the producers within their mutual competition and in relation to customers are enforced to behave responsibly.

  12. Environmental and Social Management System Implementation Handbook : Crop Production

    OpenAIRE

    International Finance Corporation

    2014-01-01

    This Handbook is intended to be a practical guide to help companies in the crop production industry develop and implement an environmental and social management system, which should help to improve overall operations. If a company has existing management systems for quality or health and safety, this Handbook will help to expand them to include environmental and social performance. Sectio...

  13. Linking legacies: Connecting the Cold War nuclear weapons production processes to their environmental consequences

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    In the aftermath of the Cold War, the US has begun addressing the environmental consequences of five decades of nuclear weapons production. In support of this effort, the National Defense Authorization Act for Fiscal Year 1995 directed the Department of Energy (DOE) to describe the waste streams generated during each step in the production of nuclear weapons. Accordingly, this report responds to this mandate, and it is the Department`s first comprehensive analysis of the sources of waste and contamination generated by the production of nuclear weapons. The report also contains information on the missions and functions of nuclear weapons facilities, on the inventories of waste and materials remaining at these facilities, as well as on the extent and characteristics of contamination in and around these facilities. This analysis unites specific environmental impacts of nuclear weapons production with particular production processes. The Department used historical records to connect nuclear weapons production processes with emerging data on waste and contamination. In this way, two of the Department`s legacies--nuclear weapons manufacturing and environmental management--have become systematically linked. The goal of this report is to provide Congress, DOE program managers, non-governmental analysts, and the public with an explicit picture of the environmental results of each step in the nuclear weapons production and disposition cycle.

  14. Linking legacies: Connecting the Cold War nuclear weapons production processes to their environmental consequences

    International Nuclear Information System (INIS)

    1997-01-01

    In the aftermath of the Cold War, the US has begun addressing the environmental consequences of five decades of nuclear weapons production. In support of this effort, the National Defense Authorization Act for Fiscal Year 1995 directed the Department of Energy (DOE) to describe the waste streams generated during each step in the production of nuclear weapons. Accordingly, this report responds to this mandate, and it is the Department's first comprehensive analysis of the sources of waste and contamination generated by the production of nuclear weapons. The report also contains information on the missions and functions of nuclear weapons facilities, on the inventories of waste and materials remaining at these facilities, as well as on the extent and characteristics of contamination in and around these facilities. This analysis unites specific environmental impacts of nuclear weapons production with particular production processes. The Department used historical records to connect nuclear weapons production processes with emerging data on waste and contamination. In this way, two of the Department's legacies--nuclear weapons manufacturing and environmental management--have become systematically linked. The goal of this report is to provide Congress, DOE program managers, non-governmental analysts, and the public with an explicit picture of the environmental results of each step in the nuclear weapons production and disposition cycle

  15. Carbon and environmental footprinting of global biofuel production

    OpenAIRE

    Hammond, Geoff P.; Seth, S.M.

    2013-01-01

    The carbon and environmental footprints associated with the global production of biofuels have been computed from a baseline of 2007-2009 out until 2019. Estimates of future global biofuel production were adopted from OECD-FAO and related projections. In order to determine the footprints associated with these (essentially 'first generation') biofuel resources, the overall environmental footprint was disaggregated into bioproductive land, built land, carbon, embodied energy, materials and wast...

  16. Clean production and design of products - Complex system and environmental politics of products

    International Nuclear Information System (INIS)

    Sanchez, M.

    1999-01-01

    The orientation of the environmental problem in sustainable terms, especially in the industrialized economies, a new profile in the last years has found. In these economies, the search of a clean production franked by a coherent politics of products and the contribution of the design of products, it have given to the environmental speech a new dimension. With the present text it is sought to respond to the necessity of exploring in Colombia this topic that has a decisive paper inside the instruments of protection of the environment cooperating to improve the quality of life in other latitudes. At the moment the theoretical foundations around the development of products play a important role in the different lines of applied investigation carried out by these countries, especially in the mark of a politics of sustainable development. In spite of the importance of this factor in the industrialized countries where the capacity of integration of a coordinated administration is of great meaning, in Colombia, particularly, the relationship between development and design of products with industry, investigation and political of development and, for our case with a clean production, it is characterized by the scarce insert and attention of this discipline

  17. The Role of L2 Learner Goal Differences in Task-Generated Oral Production

    Science.gov (United States)

    Ben Maad, Mohamed Ridha

    2016-01-01

    In light of the growing interest in the cognitive approach to task in second language (L2) research, comparatively little has been done to examine such effect over time and the role of individual differences (IDs). The present study was designed to verify some longitudinal evidence for the role of tasks in L2 production and whether IDs, in the…

  18. Food production and environmental hazards in Pakistan

    International Nuclear Information System (INIS)

    Idris, M.; Iqbal, M.M.; Shah, S.M.

    2001-01-01

    Agriculture is a profession, which is open to natural conditions and intense human activity. This has brought it in direct interface with the environment. The activities related to agriculture can have favorable as well as unfavorable influence on environment. Pressure of burgeoning population is demanding increased production from agriculture to feed and clothe the teeming millions. This has resulted in excessive use of soil, fertilizers and pesticides. This paper describe the effect of these productive resources on environment and human health. Agriculture is a complex phenomenon. It is open both on natural conditions and to intense human activity. Cyclones, floods, hailstorm, cold, heat and heavy rains all affect agriculture and so do the man-made activities especially those related to expanding industrial production. This has brought agriculture in direct interface with the environment. Agriculture exerts both favorable and unfavorable consequences on environment. The plants absorb carbon dioxide and act as filters to purify polluting aerial substances. Growing of crops itself brings pleasant changes in microclimate and to aesthetics. On the other hand, effluents of all kinds; sewage, industrial, farmyard, domestics are dumped onto the soil surface, which pollute water bodies and affect crop quality. Agricultural chemicals used to increase production can get into air, soil and water and pose serious threat to environment. In Pakistan, agriculture is the mainstay of national economy. It is accorded second priority after defense. Its share in Gross Domestic Product (GDP) is 24%, it contributes by 35% to export earnings, employs 51% of the labour force and provides livelihood to 70% of rural population. Increased pressure of burgeoning population is, however, demanding more output from agriculture to feed and clothe the teeming millions. The productive resources on the other hand are limited and are rapidly shrinking. This has led to excessive use of soil

  19. Energy production for environmental issues in Turkey

    Science.gov (United States)

    Yuksel, Ibrahim; Arman, Hasan; Halil Demirel, Ibrahim

    2017-11-01

    Due to the diversification efforts of energy sources, use of natural gas that was newly introduced into Turkish economy, has been growing rapidly. Turkey has large reserves of coal, particularly of lignite. The proven lignite reserves are 8.0 billion tons. The estimated total possible reserves are 30 billion tons. Turkey, with its young population and growing energy demand per person, its fast growing urbanization, and its economic development, has been one of the fast growing power markets of the world for the last two decades. It is expected that the demand for electric energy in Turkey will be 580 billion kWh by the year 2020. Turkey's electric energy demand is growing about 6-8% yearly due to fast economic growing. This paper deals with energy demand and consumption for environmental issues in Turkey.

  20. Making Rice Production More Environmentally-Friendly

    Directory of Open Access Journals (Sweden)

    Norman Uphoff

    2016-05-01

    Full Text Available Irrigated rice production is one of the most essential agricultural activities for sustaining our global population, and at the same time, one of the agricultural sectors considered most eco-unfriendly. This is because it consumes a larger share of available freshwater resources, competing with varied ecosystems as well as other economic sectors; its paddy fields are responsible for significant emission of greenhouse gases; and the reliance on chemical fertilizers and various agrochemicals contributes to pollution of soils and water systems. These stresses on soils, hydrology and atmosphere are actually not necessary for rice production, which can be increased by modifying agronomic practices though more agroecologically-sound management practices. These, combined under the rubric of the System of Rice Intensification (SRI, can reduce requirements of irrigation water, chemical fertilizer and agrochemicals while increasing paddy yields and farmer’s net incomes. Here we discuss how irrigated rice production can be made more eco-friendly for the benefit of farmers, consumers and the environment. This is achieved by introducing practices that improve the growth and functioning of rice plants’ root systems and enhance the abundance, diversity and activity of beneficial soil organisms that live around plant roots and within the plants themselves as symbiotic endophytes.

  1. The Deployment of Product-Related Environmental Legislation into Product Requirements

    Directory of Open Access Journals (Sweden)

    Daniela C. A. Pigosso

    2016-04-01

    Full Text Available Environmental legislation is increasingly changing its focus from manufacturing-oriented to product-oriented instruments. Compliance with product-related environmental legislation is achieved by the incorporation of environmental requirements into the early phases of the product development process (PDP. Nevertheless, the deployment of product-related environmental legislation into product requirements is still a challenge. This study followed an inductive approach to propose a guideline to support the identification, analysis and deployment of product requirements based on product-related environmental legislation. The guideline is composed of nine steps, clustered into three groups according to their main objective: (A identification of environmental product-related legislation; (B identification of legislative topics to be considered for the deployment of requirements; and (C creation and validation of product requirements. The product requirements deployed are to be considered during the PDP. The guideline was evaluated in an expert consultation in a large manufacturing company, suggesting that it can be used to support the systematization and deployment of product-related environmental requirements.

  2. PRINCIPLES OF ENVIRONMENTAL ASSESSMENT IN THE LIFECYCLE OF PRODUCTS

    Directory of Open Access Journals (Sweden)

    Joanna Kulczycka

    2017-02-01

    Full Text Available One of the aims of the European Commission (EC activities is to introduce uniform rules for the environmental performance assessment based on the life cycle assessment method (LCA, which can be widely used e.g. in eco-labeling, assessment of goods, services, technology, etc. Therefore, from 1 November 2013 the European Commission implemented a pilot phase of the project on developing common methods for measuring the environmental performance of the product and organisation, aims to develop guidance documents in this field. The pilot phase includes development of the Category Rules relating to the calculation, verification and communication for environmental footprint of the 25 categories of products and two organizations. Therefore, the article presents the principle of environmental performance based on life cycle assessment in relation to the objectives of the proposed methodology of environmental footprint.

  3. Environmental Survey preliminary report, Feed Materials Production Center, Fernald, Ohio

    Energy Technology Data Exchange (ETDEWEB)

    1987-03-01

    This report presents the preliminary findings from the first phase of the environmental survey of the United States Department of Energy (DOE) Feed Materials Production Center (FMPC), conducted June 16 through 27, 1986. The survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the survey is to identify environmental problems and areas of environmental risk associated with the FMPC. The survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the survey involves the review of existing site environmental data, observations of the operations carried on at FMPC, and interviews with site personnel. The survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its onsite activities. The Sampling and Analysis Plan will be executed by a DOE national laboratory or a support contractor. When completed, the results will be incorporated into the FMPC Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the FMPC survey. 41 refs., 20 figs., 25 tabs.

  4. Environmental control technology in petroleum drilling and production

    International Nuclear Information System (INIS)

    Wojtanowicz, A.K.

    1997-01-01

    Environmental control technology (ECT) is process integrated and relates mainly to pollution prevention and risk assessment. Mechanisms of environmental impact in petroleum drilling, well completion and production, include the generation of waste, induction of toxicity or the creation of pathways for pollutant migration. The identification and evaluation of these mechanisms constitute two parts of the scope of ECT. A third part is the development of new techniques to comply with environmental requirements without prejudicing productivity. The basic concepts of the ECT approach are presented in this chapter. The approach is then used to analyse oilfield drilling and production processes. Environmental control components developed in these technologies are described. These include: the control of the volume and toxicity of drilling fluids; source separation technology in produced water cleaning; subsurface injection of oilfield waste slurries; containment technology in the integrity of petroleum wells; subsurface reduction of produced water; oilfield pit closure technology. (37 figures; 26 tables; 227 references) (UK)

  5. Sustainable Algal Energy Production and Environmental Remediation

    Energy Technology Data Exchange (ETDEWEB)

    Cooke, William E. [College of William and Mary, Williamsburg, VA (United States). Dept. of Physics

    2012-07-14

    Overall, our results confirm that wild algal species sequester a wide range of organic and metal contaminants and excess nutrients (PAHs, trace metals, and nutrients) from natural waters, and suggest parameters that could be useful in predicting uptake rates for algae growing on an algal floway or other algal growth systems in the environment or in industrial processes. The implication for various fuel production processes differ with the detailed unit operations involved, and these results will be of use in the developing of scaling experiments for various types of engineering process designs.

  6. Biomass feedstock production systems: economic and environmental benefits

    Science.gov (United States)

    Mark D. Coleman; John A. Stanturf

    2006-01-01

    The time is ripe for expanding bioenergy production capacity and developing a bio-based economy. Modern society has created unprecedented demands for energy and chemical products that are predominately based on geologic sources. However, there is a growing consensus that constraints on the supply of petroleum and the negative environmental consequences of burning...

  7. Environmental and production rights futures: a new booming market?

    NARCIS (Netherlands)

    Pennings, J.M.E.; Meulenberg, M.T.G.

    1996-01-01

    Governments or supranational organizations have begun to introduce environmental rights (such as sulfur dioxide or chlorofluorocarbon rights) and production rights (such as milk and fishery rights) to better link production process costs and results. The authors show that the characteristics of

  8. Impact of Environmental Factors on the Regulation of Cyanotoxin Production

    Science.gov (United States)

    Boopathi, Thangavelu; Ki, Jang-Seu

    2014-01-01

    Cyanobacteria are capable of thriving in almost all environments. Recent changes in climatic conditions due to increased human activities favor the occurrence and severity of harmful cyanobacterial bloom all over the world. Knowledge of the regulation of cyanotoxins by the various environmental factors is essential for effective management of toxic cyanobacterial bloom. In recent years, progress in the field of molecular mechanisms involved in cyanotoxin production has paved the way for assessing the role of various factors on the cyanotoxin production. In this review, we present an overview of the influence of various environmental factors on the production of major group of cyanotoxins, including microcystins, nodularin, cylindrospermopsin, anatoxins and saxitoxins. PMID:24967641

  9. Nano-enabled environmental products and technologies - opportunities and drawbacks

    DEFF Research Database (Denmark)

    Møller Christensen, Frans; Brinch, Anna; Kjølholt, Jesper

    The project aims to investigate the benefits for health and environment that the use of nanomaterials in products and technologies may have. More specifically, the project provides an overview of the most relevant nano-enabled environmental technologies, different types of products and technologies...... on the (Danish) market, as well as products and technologies, which are still in R&D and it will provide a qualitative overview of health and environmental pros and cons of these technologies. The project has focused on technologies applied in: 1) purification of water and wastewater, 2) remediation of soil...

  10. Modes of environmental management in transnational product chains

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Jørgensen, Ulrik; Hendriksen, Kåre

    2007-01-01

    opportunities by being present in the country where the sourcing takes place. The paper discusses different modes of environmental management in such transnational product chains based on a number of cases, and explores the links to the business strategy of the companies and national and international......Many companies in industrialised countries are outsourcing production or sourcing materials and products in countries with lower environmental protection than the companies’ countries of origin. The background is access to special materials and/or lower costs, but some times also the market...

  11. Environmental assessment. Energy efficiency standards for consumer products

    Energy Technology Data Exchange (ETDEWEB)

    McSwain, Berah

    1980-06-01

    The Energy Policy and Conservation Act of 1975 requires DOE to prescribe energy efficiency standards for 13 consumer products. The Consumer Products Efficiency Standards (CPES) program covers: refrigerators and refrigerator-freezers, freezers, clothes dryers, water heaters, room air conditioners, home heating equipment, kitchen ranges and ovens, central air conditioners (cooling and heat pumps), furnaces, dishwashers, television sets, clothes washers, and humidifiers and dehumidifiers. This Environmental Assessment evaluates the potential environmental and socioeconomic impacts expected as a result of setting efficiency standards for all of the consumer products covered by the CPES program. DOE has proposed standards for eight of the products covered by the Program in a Notice of Proposed Rulemaking (NOPR). DOE expects to propose standards for home heating equipment, central air conditioners (heat pumps only), dishwashers, television sets, clothes washers, and humidifiers and dehumidifiers in 1981. No significant adverse environmental or socioeconomic impacts have been found to result from instituting the CPES.

  12. 'Underutilised' agricultural land: its definitions, potential use for future biomass production and its environmental implications

    Science.gov (United States)

    Miyake, Saori; Bargiel, Damian

    2017-04-01

    A growing bioeconomy and increased demand for biomass products on food, health, fibre, industrial products and energy require land resources for feedstock production. It has resulted in significant environmental and socio-economic challenges on a global scale. As a result, consideration of such effects of land use change (LUC) from biomass production (particularly for biofuel feedstock) has emerged as an important area of policy and research, and several potential solutions have been proposed to minimise such adverse LUC effects. One of these solutions is the use of lands that are not in production or not suitable for food crop production, such as 'marginal', 'degraded', 'abandoned' and 'surplus' agricultural lands for future biomass production. The terms referring to these lands are usually associated with the potential production of 'marginal crops', which can grow in marginal conditions (e.g. poor soil fertility, low rainfall, drought) without much water and agrochemical inputs. In our research, we referred to these lands as 'underutilised' agricultural land and attempted to define them for our case study areas located in Australia and Central and Eastern Europe (CEE). Our goal is to identify lands that can be used for future biomass production and to evaluate their environmental implications, particularly impacts related to biodiversity, water and soil at a landscape scale. The identification of these lands incorporates remote sensing and spatially explicit approaches. Our findings confirmed that there was no universal or single definition of the term 'underutilised' agricultural land as the definitions significantly vary by country and region depending not only on the biophysical environment but also political, institutional and socio-economic conditions. Moreover, our results highlighted that the environmental implications of production of biomass on 'underutilised' agricultural land for biomass production are highly controversial. Thus land use change

  13. Environmental pressures from European consumption and production. A study in integrated environmental and economic analysis

    Energy Technology Data Exchange (ETDEWEB)

    Watson, D. [Copenhagen Resource Institute, Copenhagen (Denmark); Fernandez, J.A.; Wittmer, D. [Wuppertal Institute, Wuppertal (Germany); Gravgaerd Pedersen, O. [Statistics Denmark, Copenhagen (Denmark); European Topic Centre on Sustainable Consumption and Production, Copenhagen (Denmark)

    2013-03-15

    Environmental pressures from European consumption and production shows how economic and environmental data can be integrated to analyse environmental performance and material efficiency of whole economies as well as their individual elements. The analyses presented in the report provide policy makers with a tool to target economic incentives and information campaigns, encouraging a shift to more sustainable production and consumption patterns in order to reduce Europe's global footprint. The report discusses two analytical approaches. The production-based method considers direct environmental pressures caused by European industries and service providers - for example, the extraction of material resources by the mining and quarrying sector, air pollutants from power stations, greenhouse gas emissions from agriculture and so on. The consumption-based method focuses on the indirect environmental pressures caused by European consumers. In this approach, the direct production-related pressures are attributed to broad groups of products and services, also taking into account pressures that are embodied in goods imported into the EU. Using Environmentally Extended Input Output Analysis (EE-IOA) it is possible to estimate the environmental pressures ultimately generated by individual product groups and also by European consumption as a whole. Four types of environmental pressures are considered by the report: raw material use, greenhouse gas emissions, acidifying air emissions, and air pollutants leading to harmful ground-level ozone. However, the method has the potential to assess many other types of environmental pressure including land use, water use, waste generation and energy use. Thanks to the conceptual consistency between the system of national economic accounts and environmental accounts, data on environmental pressures is directly comparable to economic expenditure. Policy makers can thus see which sectors have been most successful in decoupling

  14. Biomass power production in Amazonia: Environmentally sound, economically productive

    Energy Technology Data Exchange (ETDEWEB)

    Waddle, D.B. [National Rural Electric Cooperative Association, Washington, DC (United States); Hollomon, J.B. [Winrock International Institute for Agricultural Development, Arlington, VA (United States)

    1993-12-31

    With the support of the US Agency for International Development, the National Rural Electric Cooperative Association (NRECA) is assisting their utility counterparts in Bolivia to improve electric service in the country`s rural population. In remote areas, the cost of extending transmission lines to small communities is prohibitive, and diesel generators represent an expensive alternative, especially for baseload power. This has led to serious consideration of electric generating systems using locally available renewable resources, including biomass, hydro, wind, and solar energy. A project has recently been initiated in Riberalta, in the Amazonian region of Bolivia, to convert waste Brazil nut shells and sawmill residues to electricity. Working in tandem with diesel generators, the biomass-fired plant will produce base-load power in an integrated system that will be able to provide reliable and affordable electricity to the city. The project will allow the local rural electric cooperative to lower the price of electricity by nearly forty percent, enable the local Brazil nut industry to increase its level of mechanization, and reduce the environmental impacts of dumping waste shells around the city and in an adjacent river. The project is representative of others that will be funded in the future by NRECA/AID.

  15. ENVIRONMENTAL CONCERN TO ATTITUDE TOWARDS GREEN PRODUCTS: EVIDENCES FROM INDIA

    OpenAIRE

    Mohd Danish Kirmani; Mohammed Naved Khan

    2016-01-01

    The purpose of this paper is to explore the relationship of environmental concern of consumers with their attitude towards green products and also to identify the predictors of environmental concern. The data was generated from a researcher controlled sample of graduate and post-graduate students enrolled in educational institutions located in the national capital of India (New Delhi) and surrounding areas popularly known as National Capital Region (NCR). The data generated was analysed em...

  16. Environmental impact assessment of alfalfa (Medicago sativa L.) hay production.

    Science.gov (United States)

    Bacenetti, Jacopo; Lovarelli, Daniela; Tedesco, Doriana; Pretolani, Roberto; Ferrante, Valentina

    2018-09-01

    On-farm production of hay and high-protein-content feed has several advantages such as diversification of on-farm cultivated crops, reduction of off-farm feed concentrates transported over long distances and a reduction in runoff during the winter season if grown crops are perennial. Among those crops cultivated for high-protein-content feed, alfalfa (Medicago sativa L.) is one of the most important in the Italian context. Nevertheless, up to now, only a few studies have assessed the environmental performance of alfalfa hay production. In this study, using the Life Cycle Assessment approach, the environmental impact of alfalfa hay production in Northern Italy was analyzed. More in detail, two production practices (without and with irrigation) were compared. The results show that alfalfa hay production in irrigated fields has a better environmental performance compared to non-irrigated production, mainly because of the yield increase achieved with irrigation. In particular, for the Climate Change impact category, the impact is equal to 84.54 and 80.21kgCO 2 /t of hay for the scenario without and with irrigation, respectively. However, for two impact categories (Ozone Depletion and Human Toxicity-No Cancer Effect), the impact of irrigation completely offsets the yield increase, and the cultivation practice without irrigation shows the best environmental performance. For both scenarios, the mechanization of harvest is the main environmental hotspot, mostly due to fuel consumption and related combustion emissions. Wide differences were highlighted by comparing the two scenarios with the Ecoinvent process of alfalfa hay production; these differences are mostly due to the cultivation practice and, in particular, to the more intensive fertilization in Swiss production. Copyright © 2018 Elsevier B.V. All rights reserved.

  17. Water logging and salinity control for environmentally sustainable crop production

    International Nuclear Information System (INIS)

    Chaudhry, M.R.; Bhutta, M.N.

    2005-01-01

    Irrigation supplies at proper time and adequate quantities are imperative for potential agricultural production under arid and semi-arid climatic conditions. To achieve this goal one of the largest integrated irrigation network was established. Without adequate drainage it resulted in the problems of water logging and salinity. To control these problems a big programme of Salinity Control and Reclamation projects (SCARPs) was initiated during 1960 and 82 such SCARPs have been completed and 9 were in progress up to June, 2002 covering an area of 18.6 ma (7.5 mh) at a cost of Rs.93 billions. Under these projects 12746 tube wells in fresh, 3572 in saline groundwater and 13726 km surface and 12612 km tile pipes covering 6391.7 ha, 160 km interceptor drains have been constructed an area of 0.998 ma (GCA). In addition to this some other measures like on farm water management, canal command project, canal lining, construction of evaporation ponds, establishment of research Inst./Organizations were also taken. Many drainage plans like Master Plan (1963), Northern Regional Plan (1967), Water Sector Investment Plan Study (1990), Right Bank Master Plan (1992), Drainage Sector Environmental Assessment (1993) and National Drainage Programme (1995) were prepared and implemented. The cost of the, phase-I of the National Drainage Programme was 785 million US$. The main activities undertaken were remodeling/extension of existing surface and new drains; rehabilitation/replacement of saline ground water (SGW) tube wells; construction of interceptor drains, reclamation of waterlogged areas through biological drainage and transfer of fresh ground water tube wells to the farmers. The data indicate that all the measures taken have played a significant role in reducing the water logging, salinity/sodicity and have increased the crop production and consequently improved the socio-economic conditions of the peoples especially the farming community. The environment in these areas was also

  18. Assessing the Environmental Performance of Integrated Ethanol and Biogas Production

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Michael; Svensson, Niclas; Fonseca, Jorge (Linkoeping Univ., Environmental Technology and Management, Linkoeping (Sweden)), e-mail: michael.martin@liu.se

    2011-06-15

    As the production of biofuels continues to expand worldwide, criticism about, e.g. the energy output versus input and the competition with food has been questioned. However, biofuels may be optimized to increase the environmental performance through the concepts of industrial symbiosis. This paper offers a quantification of the environmental performance of industrial symbiosis in the biofuel industry through integration of biogas and ethanol processes using a life cycle approach. Results show that although increasing integration is assumed to produce environmental benefits in industrial symbiosis, not all impact categories have achieved this and the results depend upon the allocation methods chosen

  19. The Nitrogen Balancing Act: Tracking the Environmental Performance of Food Production.

    Science.gov (United States)

    McLellan, Eileen L; Cassman, Kenneth G; Eagle, Alison J; Woodbury, Peter B; Sela, Shai; Tonitto, Christina; Marjerison, Rebecca D; van Es, Harold M

    2018-03-01

    Farmers, food supply-chain entities, and policymakers need a simple but robust indicator to demonstrate progress toward reducing nitrogen pollution associated with food production. We show that nitrogen balance-the difference between nitrogen inputs and nitrogen outputs in an agricultural production system-is a robust measure of nitrogen losses that is simple to calculate, easily understood, and based on readily available farm data. Nitrogen balance provides farmers with a means of demonstrating to an increasingly concerned public that they are succeeding in reducing nitrogen losses while also improving the overall sustainability of their farming operation. Likewise, supply-chain companies and policymakers can use nitrogen balance to track progress toward sustainability goals. We describe the value of nitrogen balance in translating environmental targets into actionable goals for farmers and illustrate the potential roles of science, policy, and agricultural support networks in helping farmers achieve them.

  20. Environmental sustainability assessment of bio-ethanol production in Thailand

    International Nuclear Information System (INIS)

    Silalertruksa, Thapat; Gheewala, Shabbir H.

    2009-01-01

    Bio-ethanol is playing an important role in renewable energy for transport according to Thai government policy. This study aims to evaluate the energy efficiency and renewability of bio-ethanol system and identify the current significant environmental risks and availability of feedstocks in Thailand. Four of the seven existing ethanol plants contributing 53% of the total ethanol fuel production in Thailand have been assessed by the net energy balance method and Life Cycle Assessment (LCA). A renewability and net energy ratio portfolio has been used to indicate whether existing bio-ethanol production systems have net energy gain and could help reduce dependency on fossil energy. In addition, LCA has been conducted to identify and evaluate the environmental hotspots of 'cradle to gate' bio-ethanol production. The results show that there are significant differences of energy and environmental performance among the four existing production systems even for the same feedstock. The differences are dependent on many factors such as farming practices, feedstock transportion, fuel used in ethanol plants, operation practices and technology of ethanol conversion and waste management practices. Recommendations for improving the overall energy and environmental performance of the bio-ethanol system are suggested in order to direct the bio-ethanol industry in Thailand towards environmental sustainability.

  1. MOTIVATION: Goals and Goal Setting

    Science.gov (United States)

    Stratton, Richard K.

    2005-01-01

    Goal setting has great impact on a team's performance. Goals enable a team to synchronize their efforts to achieve success. In this article, the author talks about goals and goal setting. This articles complements Domain 5--Teaching and Communication (p.14) and discusses one of the benchmarks listed therein: "Teach the goal setting process and…

  2. Environmentally Sustainable Construction Products and Materials – Assessment of release

    DEFF Research Database (Denmark)

    Wahlström, Margareta; Laine-Yliijoki, Jutta; Järnström, helena

    The construction sector consumes yearly about half of all natural resourcesextracted in Europe and their transformation into building products has huge energy demands. Therefore the focus of today’s environmental policy is on the building end-of-life scenarios and material efficiency. Here waste...... hardly any construction product is designed keeping recycling/reuse in mind, the “Design for theEnvironment” -concept is one of the key steps towards increased recycling and reuse and thereby towards minimal environmental impacts. This project has been carried out by VTT with cooperation with the Danish...

  3. Life Cycle Environmental Impact Assessment of Local Wine Production and Consumption in Texas: Using LCA to Inspire Environmental Improvements

    OpenAIRE

    Poupart, Ashley

    2017-01-01

    The future viability of wine production is directly linked to its environmental impacts and conditions in which it is required to operate. The environmental impacts related to the production of a food product are directly influenced by the amount of materials, energy, waste and the emissions the product releases throughout the products life cycle. A life cycle assessment (LCA) provides a framework that can identify a food products relative environmental impacts and provides insights into the ...

  4. Lessons from spatial and environmental assessment of energy potentials for Anaerobic Digestion production systems applied to the Netherlands

    International Nuclear Information System (INIS)

    Pierie, F.; Benders, R.M.J.; Bekkering, J.; Gemert, W.J.Th. van; Moll, H.C.

    2016-01-01

    Highlights: • There is a substantial gap between bio-energy potential and net energy gain. • For reaching production goals the green gas utilization pathway is preferable. • Environmental sustainability favors the waste management pathway. • Renewable energy production goals and environmental sustainability do not always align. • There is a gap between top–down regulation and actual emission reduction and sustainability. - Abstract: Anaerobic digestion (AD) can play an important role in achieving the renewable energy goals set within the European Union. Within this article the focus is placed on reaching the Dutch local renewable production goal set for the year 2020 with locally available biomass waste flows, avoiding intensive farming and long transport distances of biomass and energy carriers. The bio-energy yields, efficiency and environmental sustainability are analyzed for five municipalities in the northern part of the Netherlands, using three utilization pathways: green gas production, combined heat and power, and waste management. Literature has indicated that there is sufficient bio-energy potential in local waste streams to reach the aforementioned goal. However, the average useful energy finally produced by the AD production pathway is significantly lower, often due to poor quality biomass and difficult harvesting conditions. Furthermore, of the potential bio-energy input in the three utilization pathways considered in this article, on average: 73% can be extracted as green gas; 57% as heat and power; and 44% as green gas in the waste management pathway. This demonstrates that the Dutch renewable production goal cannot be reached. The green gas utilization pathway is preferable for reaching production goals as it retains the highest amount of energy from the feedstock. However, environmental sustainability favors the waste management pathway as it has a higher overall efficiency, and lower emissions and environmental impacts. The main

  5. How can we improve the environmental sustainability of poultry production?

    Science.gov (United States)

    Leinonen, Ilkka; Kyriazakis, Ilias

    2016-08-01

    The review presents results of recent life cycle assessment studies aiming to quantify and improve the environmental performance of UK poultry production systems, including broiler meat, egg and turkey meat production. Although poultry production has been found to be relatively environmentally friendly compared with the production of other livestock commodities, it still contributes to environmental impacts, such as global warming, eutrophication and acidification. Amongst different sub-processes, feed production and transport contributes about 70 % to the global warming potential of poultry systems, whereas manure management contributes about 40-60 % to their eutrophication potential and acidification potential, respectively. All these impacts can be reduced by improving the feed efficiency, either by changing the birds through genetic selection or by making the feed more digestible (e.g. by using additives such as enzymes). However, although genetic selection has the potential to reduce the resources needed for broiler production (including feed consumption), the changing need of certain feed ingredients, most notably protein sources as a result of changes in bird requirements may limit the benefits of this strategy. The use of alternative feed ingredients, such as locally grown protein crops and agricultural by-products, as a replacement of South American grown soya, can potentially also lead to improvements in several environmental impact categories, as long as such feeding strategies have no negative effect on bird performance. Other management options, such as improving poultry housing and new strategies for manure management have also the potential to further improve the environmental sustainability of the poultry industries in Europe.

  6. Emerging sustainable/green cleaning products: health and environmental risks

    OpenAIRE

    Aydin, Mehmet Cihan; Işik, Ercan; Ulu, Ali Emre

    2016-01-01

    Sustainable development aims to bring a new perspective to our lives without compromising customer needs and quality. Along with sustainable development many innovative solutions came out. One of them is sustainable green cleaning products and techniques. Today, emissions from conventional cleaning products may cause severe health and environmental issues. Especially sick building syndromes such as eye, skin and respiratory irritations are main health effects of them. They may also contrib...

  7. Parameters for assessing the aquatic environmental impact of cosmetic products.

    Science.gov (United States)

    Vita, N A; Brohem, C A; Canavez, A D P M; Oliveira, C F S; Kruger, O; Lorencini, M; Carvalho, C M

    2018-05-01

    The cosmetic industry's growing concern about the impact of its supply chain on the environment, sustainability of raw materials, and biodiversity increases the need to ensure that the final product has a lower environmental impact. The objective of this review is to summarize and compare the information available from international organizations and legislation regarding the main criteria used to assess raw materials for aquatic toxicity, as well as the most suitable alternative methods for obtaining assessment parameters. Using the literature available in databases, a review of the scientific literature and international legislation, this work discusses and compares the parameters established by international organizations such as the Environmental Protection Agency (EPA) and Cradle to Cradle (C2C), as well as European legislation, namely, European Regulation 1272/2008, for assessing environmental impact. Defining the ecotoxicity parameters of the main classes of raw materials in rinse-off cosmetic products can enable the development of products that are more environmentally sustainable, prioritizing substances with less environmental impact. Copyright © 2018 Elsevier B.V. All rights reserved.

  8. Ukrainian realities of labeling of environmentally friendly products

    Directory of Open Access Journals (Sweden)

    I.M. Tsaruk

    2016-12-01

    Full Text Available The basis of life of any society is a safe environment that is not only the guarantee of welfare and quality of life, but also the guarantee of the further development of human civilization. That is why in the modern world the issue of the preservation of the natural environment is of special actuality. The gradual awareness by humanity of new threats (high degree of concentration of harmful industries; high level of resource and energy consumption; lack of modern environmental technologies; slow but inevitable degradation of the gene pool of a population due to the consumption of poor quality and in most cases harmful products, etc. forced the society to seek new approaches to socio-economic development and environmental management. One of such approaches is the introduction of ecological and organic labeling. Marking is a source of information about the purity, safety and quality of the products offered in the market; effective information mechanism, which is a kind of quality mark for the offered products. The current practice of ecological and organic labeling aimed at the increase of level consumer's awareness and the changing models of purchasing behavior in the direction of environmental protection. The feature of most marking systems of environmentally friendly and safe products is the obligation of compliance with the established requirements used by producers of raw materials and technologies taking into account their potential environmental impact. Labeling of ecologically clean and safe products is reducing the negative impact on the environment and on the human's health. It is the consequence of changes in the economic environment, namely: the improvement of socio-ethical requirements to production; the increasing level of integration of producers and service providers; the customer's satisfaction in varieties of products; globalization of economic space; reduction of time for development, standardization and production. Labeling is

  9. Environmental impacts the of production and use of biodiesel.

    Science.gov (United States)

    Živković, Snežana; Veljković, Milan

    2018-01-01

    Biodiesel as renewable, environmental friendly, less toxic, and biodegradable is an attractive alternative to fossil fuels and is produced mainly from vegetable oils and animal fats. It is expected, globally, that the use of renewable biofuels, in general, will increase rapidly in the near future. The growing biodiesel production and usage have encouraged assessment of its impact on the environment. The present paper reviews various aspects of biodiesel production using commercial processing technology and biodiesel use through evaluation and analysis of the studies concerning environmental impacts of biodiesel. As a general conclusion, it can be said that biodiesel has the potential to offer a series of perceived benefits such as political, economical, and agricultural, as well as environmental (due to its biodegradability, less toxicity, renewability) and health (greenhouse gas-saving, less harmful exhaust emissions).

  10. Environmental system analysis of tomato production in Ghana ...

    African Journals Online (AJOL)

    The aim of this study was to identify the most important sources of greenhouse gases, acidifying and eutrophying compounds associated with tomato production in Ghana and identify options to reduce the environmental impacts. Life Cycle Analysis (LCA) methodology was used in the analysis (Cradle to gate approach).

  11. Influence of some environmental factors on maize productivity in ...

    African Journals Online (AJOL)

    Temperature, humidity and direction of the prevailing wind are parts of significant environmental factors, which have greater impact on crop productivity, especially with the recent global climate change. These were researched into on maize seeds planted at three different furrow orientations on the field; Or. 900, Or. 600 and ...

  12. Federal Environmental Regulations Impacting Hydrocarbon Exploration, Drilling, and Production Operations

    Energy Technology Data Exchange (ETDEWEB)

    Carroll, Herbert B.; Johnson, William I.

    1999-04-27

    Waste handling and disposal from hydrocarbon exploration, drilling, and production are regulated by the US Environmental Protection Agency (EPA) through federal and state regulations and/or through implementation of federal regulations. Some wastes generated in these operations are exempt under the Resource Conservation and Recovery Act (RCRA) but are not exempt under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), Superfund Amendments and Reauthorization Act (SARA), and other federal environmental laws. Exempt wastes remain exempt only if they are not mixed with hazardous wastes or hazardous substances. Once mixture occurs, the waste must be disposed as a hazardous material in an approved hazardous waste disposal facility. Before the Clean Air Act as amended in 1990, air emissions from production, storage, steam generation, and compression facilities associated with hydrocarbon exploration, drilling, and production industry were not regulated. A critical proposed regulatory change which will significantly effect Class II injection wells for disposal of produced brine and injection for enhanced oil recovery is imminent. Federal regulations affecting hydrocarbon exploration, drilling and production, proposed EPA regulatory changes, and a recent significant US Court of Appeals decision are covered in this report. It appears that this industry will, in the future, fall under more stringent environmental regulations leading to increased costs for operators.

  13. Tire Production and Pollution Control. Environmental Education Curriculum. Revised.

    Science.gov (United States)

    Topeka Public Schools, KS.

    This unit was developed to introduce secondary students to the many facets of a typical, large manufacturing plant - the Topeka Goodyear Tire and Rubber Company - in an effort to increase awareness of sound environmental practices in industry. Its five major foci include the production of tires and quality control procedures; applications of…

  14. Uranium production and environmental restoration at Priargunsky Centre (Russian Federation)

    International Nuclear Information System (INIS)

    Shatalov, V.V.; Boitsov, A.V.; Nikolsky, A.L.; Chernigov, V.G.; Ovseichuk, V.A.

    2002-01-01

    The state enterprise 'Priargunsky Mining and Chemical Production Association' (PPGHO) is the only active uranium production centre in Russia in last decade. Mining has been operated since 1968 by two open pits and four underground mines. It is based on resources of 19 volcanic-type deposits of Streltsovsk U-ore region situated at the area of 150 km 2 . Milling and processing has been carried out since 1974 at the local hydrometallurgical plant. Since the mid 1980s, limited amount of uranium is produced by heap and block leaching methods. High level of total production marks PPGHO as one of the outstanding uranium production centers worldwide. Significant amount of solid, liquid and gas wastes have been generated for more than 30 years. The principal environmental contamination comes from waste rock piles, mine water and tailing ponds. Liquid waste seepage through tailing pond bed can essentially contaminate underground waters. The principal environmental remediation activities are: waste rock dumps and open pits rehabilitation; waste rock utilization for industrial needs; heap and block leaching mining development, strengthening dam bodies and construction intercepting wells below the tailing pond dam, hydrogeological monitoring, upgrade of mine water treatment unit. Waste is being managed by the environmental service team of PPGHO. Environmental restoration activities, including rehabilitation of the territories and waste utilization, are implemented gradually in line with decommissioning of enterprise's particular facilities. (author)

  15. Green Shoots: Environmental Sustainability and Contemporary Film Production

    Directory of Open Access Journals (Sweden)

    Victory, Jonathan

    2015-06-01

    Full Text Available This paper explores the emerging phenomenon of ‘green filmmaking’ in film production, whereby the process of filmmaking is conducted with a view to minimising environmental impact. Establishing the motivations behind green filmmaking and surveying a range of international developments in this area, sustainability initiatives are identified and considered as a means of environmentally-sustainable economic development for the film sector. After identifying challenges of consumption habits to be overcome by the film industry worldwide, recent and current initiatives are highlighted from within the international film industry and one is specifically explored in more detail: the emerging role of a designated crew member or ‘eco-manager’ to oversee environmental initiatives on-set. The paper then concludes on a range of brief policy proposals for the film sector following on from analysis of existing film industry policy towards environmental sustainability.

  16. Elevating optimal human nutrition to a central goal of plant breeding and production of plant-based foods.

    Science.gov (United States)

    Sands, David C; Morris, Cindy E; Dratz, Edward A; Pilgeram, Alice

    2009-11-01

    High-yielding cereals and other staples have produced adequate calories to ward off starvation for much of the world over several decades. However, deficiencies in certain amino acids, minerals, vitamins and fatty acids in staple crops, and animal diets derived from them, have aggravated the problem of malnutrition and the increasing incidence of certain chronic diseases in nominally well-nourished people (the so-called diseases of civilization). Enhanced global nutrition has great potential to reduce acute and chronic disease, the need for health care, the cost of health care, and to increase educational attainment, economic productivity and the quality of life. However, nutrition is currently not an important driver of most plant breeding efforts, and there are only a few well-known efforts to breed crops that are adapted to the needs of optimal human nutrition. Technological tools are available to greatly enhance the nutritional value of our staple crops. However, enhanced nutrition in major crops might only be achieved if nutritional traits are introduced in tandem with important agronomic yield drivers, such as resistance to emerging pests or diseases, to drought and salinity, to herbicides, parasitic plants, frost or heat. In this way we might circumvent a natural tendency for high yield and low production cost to effectively select against the best human nutrition. Here we discuss the need and means for agriculture, food processing, food transport, sociology, nutrition and medicine to be integrated into new approaches to food production with optimal human nutrition as a principle goal.

  17. The shaping of environmental concern in product chains: analysing Danish case studies on environmental aspects in product chain relations

    DEFF Research Database (Denmark)

    Forman, Marianne; Hansen, Anne Grethe; Jørgensen, Michael Søgaard

    indirect demand for greening activities. The analysis shows the co-construction of environmental concerns and demands, companies’ environmental practices and technological developments, and their stabilisation in the supply chain. The case studies also point to how the greening of frontrunners might make...... the systems of production, consumption, knowledge and regulation are discussed. The role of boundary objects is discussed with eco-labelling as case. The role of and the impact on the product chain relations are analysed as part of these mechanisms. From the case studies, green innovations in the product...... chain, which the case company represents, are identified. Direct customer and regulatory demands, as well as indirect societal and regulatory demands are mapped, and their role for product chain greening analysed. The case studies point to the importance of customer demand, regulation and potentially...

  18. Evaluation of Environmental Quality Productive Ecosystem Guayas (Ecuador).

    Science.gov (United States)

    Pozo, Wilson; Pardo, Francisco; Sanfeliu, Teófilo; Carrera, Gloria; Jordan, Manuel; Bech, Jaume; Roca, Núria

    2015-04-01

    Natural resources are deteriorating very rapidly in the Gulf of Guayaquil and the area of influence in the Guayas Basin due to human activity. Specific problems are generated by the mismanagement of the aquaculture industry affecting the traditional agricultural sectors: rice, banana, sugarcane, cocoa, coffee, and soya also studied, and by human and industrial settlements. The development of industrial activities such as aquaculture (shrimp building for shrimp farming in ponds) and agriculture, have increasingly contributed to the generation of waste, degrading and potentially toxic elements in high concentrations, which can have adverse effects on organisms in the ecosystems, in the health of the population and damage the ecological and environmental balance. The productive Guayas ecosystem, consists of three interrelated ecosystems, the Gulf of Guayaquil, the Guayas River estuary and the Guayas Basin buffer. The objective of this study was to evaluate the environmental quality of the productive Guayas ecosystem (Ecuador), through operational and specific objectives: 1) Draw up the transition coastal zone in the Gulf of Guayaquil, 2) Set temporal spatial variability of soil salinity in wetlands rice, Lower Guayas Basin, 3) evaluate the heavy metals in wetland rice in the Lower Basin of Guayas. The physical and chemical parameters of the soils have been studied. These are indicators of environmental quality. The multivariate statistical method showed the relations of similarities and dissimilarities between variables and parameter studies as stable. Moreover, the boundaries of coastal transition areas, temporal spatial variability of soil salinity and heavy metals in rice cultivation in the Lower Basin of Guayas were researched. The sequential studies included and discussed represent a broad framework of fundamental issues that has been valued as a basic component of the productive Guayas ecosystem. They are determinants of the environmental quality of the Guayas

  19. Integration of environmental approaches to strategy of production enterprises - environmentally oriented quality of production

    OpenAIRE

    Michalíková Frantika; Maras Michal; Floreková ¼ubica

    2001-01-01

    In the paper there are presented system approaches, applied in Slovak transformed production enterprises, which solve questions of closing the so called industrial cycle from the side of the wastes' producers. The production quality is connected not only with the technological chain itself and with outputs from it - the utility product, but also with the load of the life environment.The presented possibilities of the liquidation of solid energetic waste fly ashes represent a an overview of ...

  20. Optical And Environmental Properties Of NCAP Glazing Products

    Science.gov (United States)

    van Konynenburg, Peter; Wipfler, Richard T.; Smith, Jerry L.

    1989-07-01

    The first large area, commercially available, electrically-controllable glazing products sold under the tradename VARILITETM are based on a new liquid crystal film technology called NCAP. The glazing products can be switched in milliseconds between a highly translucent state (for privacy and glare control) to a transparent state (for high visibility) with the application of an AC voltage. The optical and environmental properties are demonstrated to meet the general requirements for architectural glazing use. The first qualified indoor product is described in detail.

  1. Methodology and data used for estimating the complex-wide impacts of alternative environmental restoration clean-up goals

    International Nuclear Information System (INIS)

    Shay, M.R.; Short, S.M.; Stiles, D.L.

    1994-03-01

    This paper describes the methodologies and data used for estimating the complex-wide impacts of alternative strategies for conducting remediation of all DOE sites and facilities, but does not address issues relating to Waste Management capabilities. Clean-up strategies and their corresponding goals for contaminated media may be driven by concentration-based regulatory standards, land-use standards (e.g., residential, industrial, wild life reserve, or totally restricted), risk-based standards, or other standards determined through stakeholder input. Strategies implemented to achieve these goals usually require the deployment of (a) clean-up technologies to destroy, remove, or contain the contaminants of concern; (b) institutional controls to prevent potential receptors from coming into contact with the contaminants; or (c) a combination of the above

  2. Optimizing cultivation of agricultural products using socio-economic and environmental scenarios.

    Science.gov (United States)

    RaheliNamin, Behnaz; Mortazavi, Samar; Salmanmahiny, Abdolrassoul

    2016-11-01

    The combination of degrading natural conditions and resources, climate change, growing population, urban development, and competition in a global market complicate optimization of land for agricultural products. The use of pesticides and fertilizers for crop production in the agricultural fields has become excessive in the recent years and Golestan Province of Iran is no exception in this regard. For this, effective management with an efficient and cost-effective practice should be undertaken, maintaining public service at a high level and preserving the environment. Improving the production efficiency of agriculture, efficient use of water resources, decreasing the use of pesticides and fertilizers, improving farmer revenue, and conservation of natural resources are the main objectives of the allocation, ranking, and optimization of agricultural products. The goal of this paper is to use an optimization procedure to lower the negative effects of agriculture while maintaining a high production rate, which is currently a gap in the study area. We collected information about fertilizer and pesticide consumption and other data in croplands of eastern Golestan Province through face-to-face interviews with farmers to optimize cultivation of the agricultural products. The toxicity of pesticides according to LD50 was also included in the optimization model. A decision-support software system called multiple criteria analysis tool was used to simultaneously minimize consumption of water, chemical fertilizers, and pesticides and maximize socio-economic returns. Three scenarios for optimization of agricultural products were generated that alternatively emphasized on environmental and socio-economic goals. Comparing socio-economic and environmental performance of the optimized agricultural products under the three scenarios illustrated the conflict between social, economic, and environmental objectives. Of the six crops studied (wheat, barley, rice, soybeans, oilseed rape

  3. How to Reach the Goal of a Sustainable Enterprise--Implementation of Environmental Education and Training in Business.

    Science.gov (United States)

    Lillehagen, Hans Christian

    1998-01-01

    The Sustainable Business Challenge is an Internet-based course designed to make future business leaders aware of environmental and social challenges in business administration. Similar projects are being conducted in Norway, Latin America, Finland, the United States, and the United Kingdom. (SK)

  4. Health inequities, environmental insecurity and the attainment of the millennium development goals in sub-Saharan Africa: the case study of Zambia.

    Science.gov (United States)

    Anyangwe, Stella C E; Mtonga, Chipayeni; Chirwa, Ben

    2006-09-01

    The United Nations Millennium Development Goals (MDGs) are a series of 8 goals and 18 targets aimed at ending extreme poverty by 2015, and there are 48 quantifiable indicators for monitoring the process. Most of the MDGs are health or health-related goals. Though the MDGs might sound ambitious, it is imperative that the world, and sub-Saharan Africa in particular, wake up to the persistent and unacceptably high rates of extreme poverty that populations live in, and find lasting solutions to age-old problems. Extreme poverty is a cause and consequence of low income, food insecurity and hunger, education and gender inequities, high disease burden, environmental degradation, insecure shelter, and lack of access to safe drinking water and basic sanitation. It is also directly linked to unsound governance and inequitable distribution of public wealth. While many regions in the world will strive to attain the MDGs by 2015, most of the countries in sub-Saharan Africa, with major human development challenges associated with socio-economic disparities, will not. Zambia's MDG progress reports of 2003 and 2005 show that despite laudable political commitment and some advances made towards achieving universal primary education, gender equality, improvement of child health and management of the HIV/AIDS epidemic, it is not likely that Zambia will achieve even half of the goals. Zambia's systems have been weakened by high disease burden and excess mortality, natural and man-made environmental threats and some negative effects of globalization such as huge external debt, low world prices for commodities and the human resource "brain drain", among others. Urgent action must follow political will, and some tried and tested strategies or "quick wins" that have been proven to produce high positive impact in the short term, need to be rapidly embarked upon by Zambia and other countries in sub-Saharan Africa if they are to achieve the Millennium Development Goals.

  5. Environmental aspects of eucalyptus based ethanol production and use

    International Nuclear Information System (INIS)

    González-García, Sara; Moreira, Ma. Teresa; Feijoo, Gumersindo

    2012-01-01

    A renewable biofuel economy is projected as a pathway to decrease dependence on fossil fuels as well as to reduce greenhouse gases (GHG) emissions. Ethanol produced on large-scale from lignocellulosic materials is considered the automotive fuel with the highest potential. In this paper, a life cycle assessment (LCA) study was developed to evaluate the environmental implications of the production of ethanol from a fast-growing short rotation crop (SRC): eucalyptus as well as its use in a flexi-fuel vehicle (FFV). The aim of the analysis was to assess the environmental performance of three ethanol based formulations: E10, E85 and E100, in comparison with conventional gasoline. The standard framework of LCA from International Standards Organization was followed and the system boundaries included the cultivation of the eucalyptus biomass, the processing to ethanol conversion, the blending with gasoline (when required) and the final use of fuels. The environmental results show reductions in all impact categories under assessment when shifting to ethanol based fuels, excluding photochemical oxidant formation, eutrophication as well as terrestrial and marine ecotoxicity which were considerably influenced by upstream activities related to ethanol manufacture. The LCA study remarked those stages where the researchers and technicians need to work to improve the environmental performance. Special attention must be paid on ethanol production related activities, such as on-site energy generation and distillation, as well as forest activities oriented to the biomass production. The use of forest machinery with higher efficiency levels, reduction of fertilizers dose and the control of diffuse emissions from the conversion plant would improve the environmental profile. -- Highlights: ► The identification of the environmental implications of the production and use of eucalyptus based ethanol was carried out. ► Eucalyptus is a Spanish common and abundant fast-growing short

  6. Proactive Goal Generation and Innovative Work Behavior: The Moderating Role of Affective Commitment, Production Ownership and Leader Support for Innovation

    Science.gov (United States)

    Montani, Francesco; Battistelli, Adalgisa; Odoardi, Carlo

    2017-01-01

    Building on goal-regulation theory, we develop and test the hypothesis that proactive goal generation fosters individual innovative work behavior. Consistent with a resource-based perspective, we further examine two-three-way interactions to assess whether the link between proactive goal generation and innovative behavior is jointly moderated by…

  7. Ceramic production during changing environmental/climatic conditions

    Science.gov (United States)

    Oestreich, Daniela B.; Glasmacher, Ulrich A.

    2015-04-01

    Ceramics, with regard to their status as largely everlasting everyday object as well as on the basis of their chronological sensitivity, reflect despite their simplicity the technological level of a culture and therefore also, directly or indirectly, the adaptability of a culture with respect to environmental and/or climatic changes. For that reason the question arises, if it is possible to identify changes in production techniques and raw material sources for ceramic production, as a response to environmental change, e.g. climate change. This paper will present results of a research about Paracas Culture (800 - 200 BC), southern Peru. Through several investigations (e.g. Schittek et al., 2014; Eitel and Mächtle, 2009) it is well known that during Paracas period changes in climate and environmental conditions take place. As a consequence, settlement patterns shifted several times through the various stages of Paracas time. Ceramics from three different sites (Jauranga, Cutamalla, Collanco) and temporal phases of the Paracas period are detailed archaeometric, geochemical and mineralogical characterized, e.g. Raman spectroscopy, XRD, and ICP-MS analyses. The aim of this research is to resolve potential differences in the chemical composition of the Paracas ceramics in space and time and to compare the data with the data sets of pre-Columbian environmental conditions. Thus influences of changing environmental conditions on human societies and their cultural conditions will be discussed. References Eitel, B. and Mächtle, B. 2009. Man and Environment in the eastern Atacama Desert (Southern Peru): Holocene climate changes and their impact on pre-Columbian cultures. In: Reindel, M. & Wagner, G. A. (eds.) New Technologies for Archaeology. Berlin Heidelberg: Springer-Verlag. Schittek, K., Mächtle, B., Schäbitz, F., Forbriger, M., Wennrich, V., Reindel, M., and Eitel, B.. Holocene environmental changes in the highlands of the southern Peruvian Andes (14° S) and their

  8. Increasing carbon and material productivity through environmental tax reform

    International Nuclear Information System (INIS)

    Ekins, Paul; Pollitt, Hector; Summerton, Philip; Chewpreecha, Unnada

    2012-01-01

    Environmental tax reform (ETR), a shift in taxation towards environmental taxes, has been implemented on a small scale in a number of European countries. This paper first gives a short review of the literature about ETR. An Appendix briefly describes the model used for a modelling exercise to explore, through scenarios with low and high international energy prices, the implications of a large-scale ETR in the European Union, sufficient to reach the EU's emission reduction targets for 2020. The paper then reports the results of the exercise. The ETR results in increased carbon and materials, but reduced labour, productivity, with the emission reductions distributed across all sectors as a reduction in the demand for all fossil fuels. There are also small GDP increases for most, but not all, EU countries for all the scenarios, and for the EU as a whole. Both the environmental and macroeconomic outcomes are better with low than with high energy prices, because the former both increases the scale of the ETR required to reach the targets, and reduces the outflow of foreign exchange to pay for energy imports. ETR emerges from the exercise as an attractive and cost-effective policy for environmental improvement. - Highlights: ► European experience with environmental tax reform (ETR) is reviewed. ► Scenarios which meet EU carbon emission targets are modelled. ► The ETR results in increased carbon and materials, but reduced labour, productivity. ► There are small GDP increases for most, but not all, EU countries. ► ETR emerges as an attractive and cost-effective environmental policy.

  9. PGE Production in Southern Africa, Part II: Environmental Aspects

    Directory of Open Access Journals (Sweden)

    Benedikt Buchspies

    2017-11-01

    Full Text Available Platinum group elements (PGEs, 6E PGE = Pt + Pd + Rh + Ru + Ir + Au are used in numerous applications that seek to reduce environmental impacts of mobility and energy generation. Consequently, the future demand for PGEs is predicted to increase. Previous studies indicate that environmental impacts of PGE production change over time emphasizing the need of up-to-date data and assessments. In this context, an analysis of environmental aspects of PGE production is needed to support the environmental assessment of technologies using PGEs, to reveal environmental hotspots within the production chain and to identify optimization potential. Therefore, this paper assesses greenhouse gas (GHG emissions, cumulative fossil energy demand (CEDfossil, sulfur dioxide (SO2 emissions and water use of primary PGE production in Southern Africa, where most of today’s supply originates from. The analysis shows that in 2015, emissions amounted to 45 t CO2-eq. and 502 kg SO2 per kg 6E PGE in the case GHG and SO2 emissions, respectively. GHG emissions are dominated by emissions from electricity provision contributing more than 90% to the overall GHG emissions. The CEDfossil amounted to 0.60 TJ per kg 6E PGE. A detailed analysis of the CEDfossil reveals that electricity provision based on coal power consumes the most fossil energy carriers among all energy forms. Results show that the emissions are directly related to the electricity demand. Thus, the reduction in the electricity demand presents the major lever to reduce the consumption of fossil energy resources and the emission of GHGs and SO2. In 2015, the water withdrawal amounted to 0.272 million L per kg 6E PGE. Additionally, 0.402 million L of recycled water were used per kg 6E PGE. All assessed indicators except ore grades and production volumes reveal increasing trends in the period from 2010 to 2015. It can be concluded that difficult market conditions (see part I of this paper series and increasing

  10. Environmental impacts and cost estimation for electricity production

    International Nuclear Information System (INIS)

    Devezeaux de Lavergne, J.G.

    2000-01-01

    This article reviews the different sources of energy used for electricity production in the view of the impact on environment. Coal, gas, wind energy, nuclear energy and hydro-energy are considered. The comparison of environmental performances requires common methodologies, 2 methodologies have been used ACV (analysis of a complete life cycle) and IPM (impact pathway methodology), both study all the exchanges of a system with the outside. The environmental performance is quantified by a series of parameters which represent the degradation of ecosystems. These parameters are divided into 4 groups: i) impact on public health, ii) impact on staff health, iii) impact on regional environment (agriculture, landscape alteration...) and iv) global impact on environment (greenhouse effect, acid rain, waste production, reduction of resources...). (A.C.)

  11. DETERMINATION OF SOCIAL ECONOMIC AND ENVIRONMENTAL SUCCESS OF PRODUCTS:

    Directory of Open Access Journals (Sweden)

    ESEN GÜRBÜZ

    2013-06-01

    Full Text Available An Empirical Investigation on the Turkish Food Industry Altough there are studies which evaulate and explain the importance of environmental, social and economic success of a product, it is important to evaluate the considerable success of these three variables together. This paper aims to evaluate economic, social and environmental success of a product all together (but not seperatly by conducting a research.  In this paper for some sample firms operating in the Turkish Food Industry, the variables, which effect the products’ economic, social and enviromental successes, are defined theoretically and the research results are explained investigating if there is a relationship between enviromental, social, economic success criteria and firm size, export, import use of intermediary.

  12. Aspects and environmental impacts associated with the production of concrete

    Directory of Open Access Journals (Sweden)

    Aura Navas de García

    2015-12-01

    Full Text Available Concrete plants are important to the economy of a country. However, this industry causes major environmental impacts in each of the steps involved in the manufacturing process of concrete production which are analyzed in this research. In addition, the perception of experts and workers in the area, about the environmental impacts associated with the activity of a producer of concrete was evaluated. The methodology used for the analysis of steps in the production process was as kind documentary. For to evaluate perception of environmental impacts the methodology used was descriptive non experimental, using interviews with workers related to the manufacturing process of the concrete. Among the major identified environmental impacts are dust emissions and improper handling of effluents, hazardous and non-hazardous materials. Among the proposals put forward to address these impacts include: installation of dust collectors, settling tanks, management plans for hazardous and non-hazardous materials, among others. An analysis of the results incorporating the principles of corporate social responsibility for improving or minimizing adverse impacts are detected proposed

  13. Bio-fuels production and the environmental indicators

    Energy Technology Data Exchange (ETDEWEB)

    Gomes, Marcos Sebastiao de Paula [Mechanical Engineering Department/Pontifical Catholic University of Rio de Janeiro - PUC-Rio, Rua Marques de Sao Vicente 225, Gavea, CEP 22453-900, Rio de Janeiro, RJ (Brazil); Muylaert de Araujo, Maria Silvia [Energy and Environment Planning Program/Federal University of Rio de Janeiro - COPPE/UFRJ, Cidade Universitaria, Centro de Tecnologia, Bloco C, sala 211, Ilha do Fundao, CEP: 21945-970, Caixa Postal: 68501, Rio de Janeiro, RJ (Brazil)

    2009-10-15

    The paper evaluates the role of the bio-fuels production in the transportation sector in the world, for programs of greenhouse gases emissions reductions and sustainable environmental performance. Depending on the methodology used to account for the local pollutant emissions and the global greenhouse gases emissions during the production and consumption of both the fossil and bio-fuels, the results can show huge differences. If it is taken into account a life cycle inventory approach to compare the different fuel sources, these results can present controversies. A comparison study involving the American oil diesel and soybean diesel developed by the National Renewable Energy Laboratory presents CO{sub 2} emissions for the bio-diesel which are almost 20% of the emissions for the oil diesel: 136 g CO{sub 2}/bhp-h for the bio-diesel from soybean and 633 g CO{sub 2}/bhp-h for the oil diesel [National Renewable Energy Laboratory - NREL/SR-580-24089]. Besides that, important local environmental impacts can also make a big difference. The water consumption in the soybean production is much larger in comparison with the water consumption for the diesel production [National Renewable Energy Laboratory - NREL/SR-580-24089]. Brazil has an important role to play in this scenario because of its large experience in bio-fuels production since the seventies, and the country has conditions to produce bio-fuels for attending great part of the world demand in a sustainable pathway. (author)

  14. Updating of U.S. Wood Product Life-Cycle Assessment Data for Environmental Product Declarations

    Science.gov (United States)

    Richard Bergman; Elaine Oneil; Maureen Puettmann; Ivan Eastin; Indroneil Ganguly

    2014-01-01

    The marketplace has an increasing desire for credible and transparent product eco-labels based on life-cycle assessment (LCA) data, especially involving international trade. Over the past several years, stakeholders in the U.S. wood products industry have developed many such “eco-labels” under the ISO standard of LCA-based environmental product declarations (EPDs). The...

  15. Leading product-related environmental performance indicators: a selection guide and database

    DEFF Research Database (Denmark)

    Issa, Isabela I.; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

    2015-01-01

    Ecodesign is a proactive environmental management and improvement approach employed in the product development process, which aims to minimize the environmental impacts caused during a product's life cycle and thus improve its environmental performance. The establishment of measurable environmental...... in the selection and application of environmental performance indicators - a more structured approach is still lacking. This paper presents the efforts made to identify and systematize existing leading product-related environmental performance indicators, based on a systematic literature review, and to develop...

  16. Technological challenges for boosting coal production with environmental sustainability.

    Science.gov (United States)

    Ghose, Mrinal K

    2009-07-01

    The global energy requirement has grown at a phenomenon rate and the consumption of primary energy sources has been a very high positive growth. This paper focuses on the consumption of different primary energy sources and it identifies that coal will continue to remain as the prime energy source in foreseeable future. It examines the energy requirement perspective for India and demand of coal as the prime energy source. Economic development and poverty alleviation depend on securing affordable energy sources and Indian coal mining industry offers a bright future for the country's energy security, provided the industry is allowed to develop by supportive government policies and adopts latest technologies for mining. It is an irony that in-spite of having a plentiful reserves, India is not able to jack up coal production to meet its current and future demand. It discusses the strategies to be adopted for growth and meeting the coal demand. But such energy are very much concerned with environmental degradation and must be driven by contemporary managerial acumen addressing environmental and social challenges effectively The paper highlights the emissions of greenhouse gases due to burning of fossil fuels and environmental consequences of global warming and sea-level rise. Technological solutions for environment friendly coal mining and environmental laws for the abatement of environmental degradation are discussed in this paper.

  17. Feed Materials Production Center annual environmental report for calendar 1989

    Energy Technology Data Exchange (ETDEWEB)

    Dugan, T.A.; Gels, G.L.; Oberjohn, J.S.; Rogers, L.K.

    1990-10-01

    The mission of the Department of Energy's (DOE) Feed Materials Production Center (FMPC) has been to process uranium for United States' defense programs. On July 10, 1989, the FMPC suspended production operations, but remains on standby for certain segments of production. The FMPC also manages the storage of some radioactive and hazardous materials. As part of its operations, the FMPC continuously monitors the environment to determine that it is operating within federal and state standards and guidelines regarding emission of radioactive and nonradioactive materials. Data collected from the FMPC monitoring program are used to calculate estimates of radiation dose for residents due to FMPC operations. For 1989, the estimate of dose through the air pathway, excluding radon, indicated that people in the area were exposed to less than 6% of the DOE guideline established to protect the public from radiation exposure. When radon emissions are included, the dose from FMPC operations during 1989 was less than 22% of the annual background radiation dose in the Greater Cincinnati area. This report is a summary of FMPC's environmental activities and monitoring program for 1989. An Environmental Compliance Self-Assessment presents the FMPC's efforts to comply with environmental regulations through June 1990. 44 refs., 48 figs.

  18. Floating on the margins [Environmental issues for floating production platforms

    International Nuclear Information System (INIS)

    Grimshaw, R.

    1997-01-01

    The main environmental issues challenging oilfield development using floating production platforms in harsh environments such as the Atlantic frontier are discussed. These fall into two broad categories -operating conditions and biological disturbance. Particular combinations of wind and currents can lead to extremely difficult operating conditions through which floating units are expected to maintain production for economic reasons. This imposes stringent conditions on the design and construction of tanker hulls and of risers to enable them to remain connected at all times. Prediction of wind and wave forces is a crucial element of operational and safety planning. Fauna in seabed sediments disturbed by pipeline laying often relocate but some seeding back of colonies may be required in hard rock areas. Migration routes for cetaceans and the feeding grounds of marine birds must be considered and the potential long and short term damage to commercial fisheries through discharges need to be assessed. A significant risk is the interaction of sub-sea facilities and fishing gear and oil spills. Operational and accidental discharges of production chemicals, produced water containing oil, deck drainage and treated sewage, and discharges to air from flaring and utility exhausts are of major environmental concern calling for mitigation and protection measures and contingency plans. Some of the environmental issues associated with decommissioning are reduced by the use of floating platforms but there are global and national regulations governing the process. (UK)

  19. Products and Processes Innovation from the Perspective of Environmental Management

    Directory of Open Access Journals (Sweden)

    Vanessa Theis

    2017-05-01

    Full Text Available Considering the present scenario of globalization of the economy, the dynamics of the market determines the speed of change in business models, environmental aspects can contribute to the design of technological innovations. Given this perception, the general objective of this research was to investigate how industrial organizations in the metal-mechanic sector, located in the Vale do Rio dos Sinos region, reconcile the product innovation activities and processes, with the structuring principles of environmental management. This economic segment is characterized as one that has the highest rates of innovation and greater investment in research and development. Data were collected through a survey research with managers of 159 companies of the analysis unit. Evidence collected provided the realization that innovations tend to be adjustments made to the legal provisions that require the mitigation of environmental impacts in the production process, especially in reducing pollution and using less toxic assets, which does not generate sufficient stimulus to the development of new products.

  20. Integration of environmental approaches to strategy of production enterprises - environmentally oriented quality of production

    Directory of Open Access Journals (Sweden)

    Michalíková Františka

    2001-12-01

    Full Text Available In the paper there are presented system approaches, applied in Slovak transformed production enterprises, which solve questions of closing the so called industrial cycle from the side of the wastes' producers. The production quality is connected not only with the technological chain itself and with outputs from it - the utility product, but also with the load of the life environment.The presented possibilities of the liquidation of solid energetic waste – fly ashes – represent a an overview of forms and methods of its utilization. By combusting one kind of coal in various boilers, fly ashes with different physical, chemical, and mineralogical properties originate, with the combustion temperature as a dominant factor. The fly ashes are directly (without influencing its composition applied in civil engineering, mining, metallurgy, waste water cleaning, etc. Their utilization after a separation removal of unwanted components is an economically difficult process. Such a unvaluable component is coal combustion residue, evaluated by the annealing loss (carbon-in-ash loss in fly ashes used for special procedures in civil enginering, e.g. in mortars (maximally 4% of c.a.s. loss or in the porous concrete (4-7% of c.a.s. loss. The building industry processes about 20% of solid energetic waste.

  1. Environmental benefits of the integrated production of ethanol and biodiesel

    International Nuclear Information System (INIS)

    Souza, Simone Pereira; Seabra, Joaquim E.A.

    2013-01-01

    Highlights: ► Integrated bioenergy systems can favor the sustainability of biofuels. ► We analyzed the integrated production of ethanol and biodiesel in Brazil. ► GHG emissions and fossil energy use in the ethanol life cycle would be reduced. ► Socio-economic and other environmental aspects must be analyzed in future works. -- Abstract: The biorefinery of the future will be an integrated complex that makes a variety of products (e.g., biofuels, chemicals, power and protein) from a variety of feedstocks. The objective of this work was to evaluate the environmental benefits, compared to the traditional sugarcane ethanol system, of the integrated production of ethanol and biodiesel through a sugarcane–soybean biorefinery concept in Brazil. The environmental aspects considered here were the fossil energy use and the greenhouse gases (GHGs) emissions associated with ethanol production. In the Integrated System, soybean would be cultivated in part of the sugarcane reforming areas, which represents ∼17% of the total sugarcane area. Sugarcane and soybean oil would be processed in a combined ethanol–biodiesel plant, which would use only bagasse as fuel. All the demand for utilities of the biodiesel plant would be provided by the distillery. The output products of the combined plant would comprise sugarcane ethanol, soybean biodiesel (which would be used as diesel (B5) substitute in the sugarcane cultivation), bioelectricity and glycerin. The results indicate that the Integrated System can reduce the fossil energy consumption from 75 to 37 kJ/MJ of ethanol, when compared to the traditional system. For GHG emissions, the value would drop from 22.5 to 19.7 g CO 2 eq/MJ of ethanol. This analysis shows that the Integrated System is an important option to contribute to ethanol’s life cycle independence from fossil resources. This is an attractive environmental aspect, but socio-economic (as well as other environmental) aspects should also be analyzed in order to

  2. Expanding OPEC production capacity: some legal and environmental aspects

    International Nuclear Information System (INIS)

    Al-Sahlawi, M.A.

    1992-01-01

    There is general consensus that the global demand for oil will increase in the medium-to-long term. It is predicted that much of this additional demand will be for OPEC oil. Therefore, it will become necessary to expand OPEC production capacity to meet this perceived increase. In recent years, many OPEC countries have launched far-reaching and, in some cases, radical plans to expand their production capacity. However, given the various investment and political constraints faced by the 13 OPEC Members, each country differs markedly in its ability to boost production capacity sufficiently to meet self-imposed targets. In this paper, we examine the importance to the oil market of recent oil supply trends and possible future attempts to build OPEC production capacity, focussing in particular on the legal and environmental issues involved. A review is provided of the legal mechanisms currently evolving in OPEC Countries to encourage investment in their oil industries. In addition, we outline the impact of the environmental movement of OPEC's expansion programmes. (author)

  3. Environmental consequences of different beef production systems in the EU

    DEFF Research Database (Denmark)

    Nguyen, T Lan T; Hermansen, John Erik; Mogensen, Lisbeth

    2010-01-01

    The aim of this paper is to examine the environmental consequences of beef meat production in the EU, using a life cycle approach. Four beef production systems were studied - three from intensively reared dairy calves and one from suckler herds. According to the results of the analysis......, the contributions from the production of 1 kg beef meat (slaughter weight) to global warming, acidification, eutrophication, land use and non-renewable energy use were lower for beef from dairy calves than from suckler herds (16.0-19.9 versus 27.3 kg CO2e, 101-173 versus 210 g SO2e, 622-1140 versus 1651 g NO3e, 16.......5-22.7 versus 42.9 m2year, and 41.3-48.2 versus 59.2 MJ, respectively). The breakdown analysis helped identify the key areas in the "cradle to farm gate" beef production system where sustainable management strategies are needed to improve environmental performance. The study also included a sensitivity analysis...

  4. Solar as an environmental product. Thin-film modules. Production processes and their environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    De Wild - Scholten, M.J. [ECN Solar Energy, Petten (Netherlands); Schottler, M. [M and W Zander, Stuttgart (Germany)

    2009-06-15

    The outline of this presentation is as follows: (1) Life-cycle thinking: (a) Establish emissions from the production site; (b) Include emissions from supply and disposal (Indirect Emissions); (c) Establish use of resources from nature; (2) What are the life-cycle impacts and largest contributions?: (a) Energy payback time; (b) Greenhouse gas emissions; (c) Toxic impacts; (d) Others?; (3) How to reduce life-cycle impacts?: (a) Near term objectives as a result of analysis from (2); (b) Long term objectives to reach an ecological optimum.

  5. Environmental impacts of biomass energy resource production and utilization

    International Nuclear Information System (INIS)

    Easterly, J.L.; Dunn, S.M.

    1995-01-01

    The purpose of this paper is to provide a broad overview of the environmental impacts associated with the production, conversion and utilization of biomass energy resources and compare them with the impacts of conventional fuels. The use of sustainable biomass resources can play an important role in helping developing nations meet their rapidly growing energy needs, while providing significant environmental advantages over the use of fossil fuels. Two of the most important environmental benefits biomass energy offers are reduced net emissions of greenhouse gases, particularly CO 2 , and reduced emissions of SO 2 , the primary contributor to acid rain. The paper also addresses the environmental impacts of supplying a range of specific biomass resources, including forest-based resources, numerous types of biomass residues and energy crops. Some of the benefits offered by the various biomass supplies include support for improved forest management, improved waste management, reduced air emissions (by eliminating the need for open-field burning of residues) and reduced soil erosion (for example, where perennial energy crops are planted on degraded or deforested land). The environmental impacts of a range of biomass conversion technologies are also addressed, including those from the thermochemical processing of biomass (including direct combustion in residential wood stoves and industrial-scale boilers, gasification and pyrolysis); biochemical processing (anaerobic digestion and fermentation); and chemical processing (extraction of organic oils). In addition to reducing CO 2 and SO 2 , other environmental benefits of biomass conversion technologies include the distinctly lower toxicity of the ash compared to coal ash, reduced odours and pathogens from manure, reduced vehicle emissions of CO 2 , with the use of ethanol fuel blends, and reduced particulate and hydrocarbon emissions where biodiesel is used as a substitute for diesel fuel. In general, the key elements for

  6. The environmentally friendly technology for bio fuel production

    International Nuclear Information System (INIS)

    Bekers, M.; Danilevics, A.; Guriniece, E.; Gulbis, V.

    2003-01-01

    Full text: Bio fuel production and use have been discussed this time in EC and in Latvia as alternative energy sources. The national resources allow producing liquid fuels - bio diesel and bi oethanol from rape seeds and grain correspondingly. Liquid bio fuels can be recommended especially for auto transport in big towns to reduce the pollution of air. A system for environmentally friendly production of bio fuel from agricultural raw materials has been developed, which permit a complex utilization of byproducts an wastes for obtaining of valuable food-stuffs and industrial products, providing the agricultural production requirements and supporting with local mineral fertilizers. Such a bio fuel production includes the agricultural and industrial productions in a united biotechnological system. Production objects of system interact: the products, by-products and wastes from one object are used as raw materials, auxiliary materials or heat carriers in other system's objects. This integrated agro-industrial production system would allow the production of feeds and chemical products, along with bio fuels. In this work, a model of a system for a conventional administrative rural region is presented, exemplified with the case of Latvia. The model is developed for three forms of bio fuel production, i.e. ethanol, bio diesel and biogas as local energy source. Bio diesel is produced using ethanol as transesterifying agent of rape-seed oil fatty acids. This bio diesel is a blend of rape-seed oil fatty acid ethyl esters (REE) and consists solely from renewable raw materials. The capacity of distillery of system is 40 million litters per year and bio diesel 35000 ton. Important for agriculture is protein reach press cakes the byproduct from bio diesel production (66000 t/y). This byproduct can be exported as well. Biogas reactors of system can be used for utilization of wastes from town if necessary. Recommended bio system occupates up to 150.000 ha of agriculture lands

  7. Tobacco Product Waste: An Environmental Approach to Reduce Tobacco Consumption.

    Science.gov (United States)

    Novotny, Thomas E; Slaughter, Elli

    2014-01-01

    Cigarette butts and other tobacco product wastes (TPW) are the most common items picked up in urban and beach cleanups worldwide. TPW contains all the toxins, nicotine, and carcinogens found in tobacco products, along with the plastic nonbiodegradable filter attached to almost all cigarettes sold in the United States and in most countries worldwide. Toxicity studies suggest that compounds leached from cigarette butts in salt and fresh water are toxic to aquatic micro-organisms and test fish. Toxic chemicals have also been identified in roadside TPW. With as much as two-thirds of all smoked cigarettes (numbering in the trillions globally) being discarded into the environment each year, it is critical to consider the potential toxicity and remediation of these waste products. This article reviews reports on the toxicity of TPW and recommends several policy approaches to mitigation of this ubiquitous environmental blight.

  8. Long term energy-related environmental issues of copper production

    Energy Technology Data Exchange (ETDEWEB)

    Alvarado, S. [University of Chile, Santiago (Chile). Dept. of Mechanical Engineering; Maldonado, P.; Barrios, A.; Jaques, I. [University of Chile, Santiago (Chile). Energy Research Program

    2002-02-01

    Primary copper production is a major activity in the mining sector of several countries. However, it is highly energy-intensive and poses important environmental hazards. In the case of Chile, the world's largest copper producer (40% of world total), we examine its energy consumption and energy-related environmental implications over a time horizon of 25 years. Concerning the latter, we focus on greenhouse-gas (GHG) emissions, one of the most debated environmental issues. This paper follows up our previous report in which the current situation was analyzed and a particular technical option for improving the energy efficiency and concurrently reducing GHG emissions was discussed. Estimated reference or base (BS) and mitigation (MS) scenarios are developed for the period ending in 2020. The former assesses the energy demand projected in accordance with production forecasts and specific energy consumption patterns (assuming that energy efficiency measures are adopted 'spontaneously') with their resultant GHG emissions, while the latter assumes induced actions intended to reduce emissions by adopting an aggressive policy of efficient energy use. For the year 2020, the main results are: (i) BS, 1214 t of CO{sub 2}/ton of refined copper content (49% lower than in 1994); (ii) MS, 1037 t of CO{sub 2}/t of refined copper content (56% lower than in 1994). CO{sub 2} emissions have been estimated considering both fuel and electricity process requirements. (author)

  9. Long term energy-related environmental issues of copper production

    International Nuclear Information System (INIS)

    Alvarado, S.; Maldonado, P.; Barrios, A.; Jaques, I.

    2002-01-01

    Primary copper production is a major activity in the mining sector of several countries. However, it is highly energy-intensive and poses important environmental hazards. In the case of Chile, the world's largest copper producer (40% of world total), we examine its energy consumption and energy-related environmental implications over a time horizon of 25 years. Concerning the latter, we focus on greenhouse-gas (GHG) emissions, one of the most debated environmental issues. This paper follows up our previous report in which the current situation was analyzed and a particular technical option for improving the energy efficiency and concurrently reducing GHG emissions was discussed. Estimated reference or base (BS) and mitigation (MS) scenarios are developed for the period ending in 2020. The former assesses the energy demand projected in accordance with production forecasts and specific energy consumption patterns (assuming that energy efficiency measures are adopted 'spontaneously') with their resultant GHG emissions, while the latter assumes induced actions intended to reduce emissions by adopting an aggressive policy of efficient energy use. For the year 2020, the main results are: (i) BS, 1214 t of CO 2 /ton of refined copper content (49% lower than in 1994); (ii) MS, 1037 t of CO 2 /t of refined copper content (56% lower than in 1994). CO 2 emissions have been estimated considering both fuel and electricity process requirements. (author)

  10. Environmentally Benign Production of Stretchable and Robust Superhydrophobic Silicone Monoliths.

    Science.gov (United States)

    Davis, Alexander; Surdo, Salvatore; Caputo, Gianvito; Bayer, Ilker S; Athanassiou, Athanassia

    2018-01-24

    Superhydrophobic materials hold an enormous potential in sectors as important as aerospace, food industries, or biomedicine. Despite this great promise, the lack of environmentally friendly production methods and limited robustness remain the two most pertinent barriers to the scalability, large-area production, and widespread use of superhydrophobic materials. In this work, highly robust superhydrophobic silicone monoliths are produced through a scalable and environmentally friendly emulsion technique. It is first found that stable and surfactantless water-in-polydimethylsiloxane (PDMS) emulsions can be formed through mechanical mixing. Increasing the internal phase fraction of the precursor emulsion is found to increase porosity and microtexture of the final monoliths, rendering them superhydrophobic. Silica nanoparticles can also be dispersed in the aqueous internal phase to create micro/nanotextured monoliths, giving further improvements in superhydrophobicity. Due to the elastomeric nature of PDMS, superhydrophobicity can be maintained even while the material is mechanically strained or compressed. In addition, because of their self-similarity, the monoliths show outstanding robustness to knife-scratch, tape-peel, and finger-wipe tests, as well as rigorous sandpaper abrasion. Superhydrophobicity was also unchanged when exposed to adverse environmental conditions including corrosive solutions, UV light, extreme temperatures, and high-energy droplet impact. Finally, important properties for eventual adoption in real-world applications including self-cleaning, stain-repellence, and blood-repellence are demonstrated.

  11. Environmental protection in exploration and production by AGIP

    International Nuclear Information System (INIS)

    Dossena, G.; Di Luise, G.; Ceffa, L.

    1991-01-01

    This paper provides a panorama of environmental protection activities being undertaken by AGIP (Italian General Petroleum Company). The Company has developed a wide-ranging program based on 20 years experience in world-wide on- and off-shore exploration and production. The research studies on technologically innovative on-site waste management, noise abatement and subsidence control and monitoring techniques are co-operative efforts involving the joint participation of national research institutions, universities and leading international petroleum companies. Given the intense oil carrier traffic along Italy's tourism dependent coastlines, one of the key projects is the creation of a national emergency plan to deal with oil spills. AGIP is also actively involved in the training of national and foreign site personnel in environmental protection techniques

  12. Evaluation of indicators to assess the environmental impact of dairy production systems

    NARCIS (Netherlands)

    Thomassen, M.A.; Boer, de I.J.M.

    2005-01-01

    Current awareness of environmental pollution of animal production in Western Europe has triggered research on development of environmental indicators at farm level. Only when the environmental impact of commercial farms can be quantified effectively, important differences in impact can be

  13. Combustion and environmental performance of clean coal end products

    Energy Technology Data Exchange (ETDEWEB)

    Skodras, G.; Sakellaropoulos, G. [Centre for Research and Technology, Hellas, Ptolemaidas-Kozanis, Ptolemaida (Greece). Inst. for Solid Fuel Technolgy and Applications]|[Aristotle Univ. of Thessaloniki, Thessaloniki (Greece). Dept. of Chemical Engineering, Chemical Process Engineering Lab]|[Chemical Process Engineering Research Inst., Thessaloniki (Greece). Lab. of Solid Fuels and Environment; Someus, E. [Thermal Desorption Technology Group (Greece); Grammelis, P.; Amarantos, P.S. [Centre for Research and Technology, Hellas, Ptolemaidas-Kozanis, Ptolemaida (Greece). Inst. for Solid Fuel Technolgy and Applications; Palladas, A.; Basinas, P.; Natas, P.; Prokopidou, M.; Diamantopoulou, I.; Sakellaropoulos, G. [Aristotle Univ. of Thessaloniki, Thessaloniki (Greece). Dept. of Chemical Engineering, Chemical Process Engineering Lab

    2006-07-01

    Clean and affordable power production is needed in order to achieve sustainable economic development. This paper focused on clean coal technologies in which coal-fired power plants are used in conjunction with large amounts of renewable energy sources to offer a high level of process safety and long term management of all residual operation streams. Thermal Desorption Recycle-Reduce-Reuse Technology (TDT-3R) was described as being a promising solid fuel pretreatment process for clean energy production up to 300 MWe capacities. TDT-3R is based on low temperature carbonisation fuel pre-treatment principles, which produce cleansed anthracite type fuels from coal and other carbonaceous material such as biomass and organic wastes. The combustion efficiency of such clean coals and the environmental performance of the TDT-3R process were investigated in this study via pilot scale tests of clean fuel production. Tests included flue gas emissions monitoring, raw fuel and product characterisation and thermogravimetric tests, polychlorinated dibenzo-p-dioxins and dibenzo-furans, and heavy metals analyses, and toxicity tests. Raw material included coal and biomass, such as willow, straw and demolition wood. The fuels were heated in a rotary kiln operating at 550 degrees C under slightly vacuum conditions. Clean coals were tested either alone or in conjunction with biomass fuels in a pilot scale combustion facility at Dresden, Germany. The clean coal samples were shown to have higher fixed carbon and ash content and lower volatiles compared to the respective raw coal samples. The major advantage of the TDT-3R process is the production of fuels with much lower pollutants content. Low nitrogen, sulphur, chlorine and heavy metal contents result in produced fuels that have excellent environmental performance, allow boiler operation in higher temperatures and overall better efficiency. Moreover, the use of clean fuels reduces deposition problems in the combustion chamber due to the

  14. Health Inequities, Environmental Insecurity and the Attainment of the Millennium Development Goals in Sub-Saharan Africa: The Case Study of Zambia

    Directory of Open Access Journals (Sweden)

    Ben Chirwa

    2006-09-01

    Full Text Available The United Nations Millennium Development Goals (MDGs are a series of 8 goals and 18 targets aimed at ending extreme poverty by 2015, and there are 48 quantifiable indicators for monitoring the process. Most of the MDGs are health or health-related goals. Though the MDGs might sound ambitious, it is imperative that the world, and sub-Saharan Africa in particular, wake up to the persistent and unacceptably high rates of extreme poverty that populations live in, and find lasting solutions to age-old problems. Extreme poverty is a cause and consequence of low income, food insecurity and hunger, education and gender inequities, high disease burden, environmental degradation, insecure shelter, and lack of access to safe drinking water and basic sanitation. It is also directly linked to unsound governance and inequitable distribution of public wealth. While many regions in the world will strive to attain the MDGs by 2015, most of the countries in sub-Saharan Africa, with major human development challenges associated with socio-economic disparities, will not. Zambia’s MDG progress reports of 2003 and 2005 show that despite laudable political commitment and some advances made towards achieving universal primary education, gender equality, improvement of child health and management of the HIV/AIDS epidemic, it is not likely that Zambia will achieve even half of the goals. Zambia’s systems have been weakened by high disease burden and excess mortality, natural and man-made environmental threats and some negative effects of globalization such as huge external debt, low world prices for commodities and the human resource “brain drain”, among others. Urgent action must follow political will, and some tried and tested strategies or “quick wins” that have been proven to produce high positive impact in the short term, need to be rapidly embarked upon by Zambia and other countries in sub

  15. Goal Definition

    DEFF Research Database (Denmark)

    Bjørn, Anders; Laurent, Alexis; Owsianiak, Mikołaj

    2018-01-01

    The goal definition is the first phase of an LCA and determines the purpose of a study in detail. This chapter teaches how to perform the six aspects of a goal definition: (1) Intended applications of the results, (2) Limitations due to methodological choices, (3) Decision context and reasons...... for carrying out the study, (4) Target audience , (5) Comparative studies to be disclosed to the public and (6) Commissioner of the study and other influential actors. The instructions address both the conduct and reporting of a goal definition and are largely based on the ILCD guidance document (EC...

  16. Environmental impacts of chocolate production and consumption in the UK.

    Science.gov (United States)

    Konstantas, Antonios; Jeswani, Harish K; Stamford, Laurence; Azapagic, Adisa

    2018-04-01

    This study evaluates life cycle environmental impacts associated with chocolate products made and consumed in the UK. The paper focuses on three representative chocolate products occupying 90% of the market: 'moulded chocolate', 'chocolate countlines' and 'chocolates in bag'. The impacts were estimated using life cycle assessment (LCA) as a tool and following the ReCiPe impact assessment method. The water footprint was also considered. For example, the global warming potential ranges between 2.91 and 4.15 kg CO 2 eq., primary energy demand from 30 to 41 MJ and the water footprint, including water stress, from 31 to 63 l per kilogram of chocolate. The raw materials are the major hotspot across all impact categories for all three product types, followed by the chocolate production process and packaging. The raw material impacts are mainly due to milk powder, cocoa derivatives, sugar and palm oil. The sensitivity analysis shows that the results for global warming potential are sensitive to land-use change (LUC) associated with cocoa production, increasing the impact of the chocolate products by three to four times if LUC is involved. The improvement opportunities targeting the key contributing stages suggest that GWP of chocolates could be reduced by 14%-19%. Chocolate countlines have the highest contribution to the total impacts at the UK level (37%-43%), followed by chocolates in bag (28%-33%). Moulded chocolates and other chocolate confectionary make up the rest of the impacts, with a roughly equal share each. Chocolate consumption in the UK contributes 4.7% to the primary energy consumption and 2.4% to the GHG emissions from the whole food and drink sector. The results of this work will be of interest to policy makers, chocolate producers and consumers, helping them to make more informed decisions towards sustainable production and consumption of chocolate products. Copyright © 2018 Elsevier Ltd. All rights reserved.

  17. Energy and environmental implications of novel protein production systems

    Energy Technology Data Exchange (ETDEWEB)

    Edwardson, W; Lewis, C W; Slesser, M

    1981-04-01

    The energy requirements of many novel protein production systems are compared with an examination of the relevant environmental implications of these systems. The prospects for single cell protein, leaf protein, fish farming, fish protein concentrate, algal cultivation, and hydroponic plant growth systems are investigated. Single cell protein from carbohydrate substrates, algal protein, and fish protein seem to hold much promise, as they are technologically feasible for near-term implementation and do not require major energy inputs. (2 diagrams, 1 graph, 47 references, 6 tables)

  18. Environmental impacts of precision feeding programs applied in pig production.

    Science.gov (United States)

    Andretta, I; Hauschild, L; Kipper, M; Pires, P G S; Pomar, C

    2017-12-04

    This study was undertaken to evaluate the effect that switching from conventional to precision feeding systems during the growing-finishing phase would have on the potential environmental impact of Brazilian pig production. Standard life-cycle assessment procedures were used, with a cradle-to-farm gate boundary. The inputs and outputs of each interface of the life cycle (production of feed ingredients, processing in the feed industry, transportation and animal rearing) were organized in a model. Grain production was independently characterized in the Central-West and South regions of Brazil, whereas the pigs were raised in the South region. Three feeding programs were applied for growing-finishing pigs: conventional phase feeding by group (CON); precision daily feeding by group (PFG) (whole herd fed the same daily adjusted diet); and precision daily feeding by individual (PFI) (diets adjusted daily to match individual nutrient requirements). Raising pigs (1 t pig BW at farm gate) in South Brazil under the CON feeding program using grain cultivated in the same region led to emissions of 1840 kg of CO2-eq, 13.1 kg of PO4-eq and 32.2 kg of SO2-eq. Simulations using grain from the Central-West region showed a greater climate change impact. Compared with the previous scenario, a 17% increase in climate change impact was found when simulating with soybeans produced in Central-West Brazil, whereas a 28% increase was observed when simulating with corn and soybeans from Central-West Brazil. Compared with the CON feeding program, the PFG and PFI programs reduced the potential environmental impact. Applying the PFG program mitigated the potential climate change impact and eutrophication by up to 4%, and acidification impact by up to 3% compared with the CON program. Making a further adjustment by feeding pigs according to their individual nutrient requirements mitigated the potential climate change impact by up to 6% and the potential eutrophication and acidification impact

  19. Golbal Economic and Environmental Impacts of Increased Bioenergy Production

    Energy Technology Data Exchange (ETDEWEB)

    Wallace Tyner

    2012-05-30

    The project had three main objectives: to build and incorporate an explicit biomass energy sector within the GTAP analytical framework and data base; to provide an analysis of the impact of renewable fuel standards and other policies in the U.S. and E.U, as well as alternative biofuel policies in other parts of the world, on changes in production, prices, consumption, trade and poverty; and to evaluate environmental impacts of alternative policies for bioenergy development. Progress and outputs related to each objective are reported.

  20. Proceedings of Workshop on Uranium Production Environmental Restoration: An exchange between the United States and Germany

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    Scientists, engineers, elected officials, and industry regulators from the United, States and Germany met in Albuquerque, New Mexico, August 16--20, 1993, in the first joint international workshop to discuss uranium tailings remediation. Entitled ``Workshop on Uranium Production Environmental Restoration: An Exchange between the US and Germany,`` the meeting was hosted by the US Department of Energy`s (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project. The goal of the workshop was to further understanding and communication on the uranium tailings cleanup projects in the US and Germany. Many communities around the world are faced with an environmental legacy -- enormous quantities of hazardous and low-level radioactive materials from the production of uranium used for energy and nuclear weapons. In 1978, the US Congress passed the Uranium Mill Tailings Radiation Control Act. Title I of the law established a program to assess the tailings at inactive uranium processing sites and provide a means for joint federal and state funding of the cleanup efforts at sites where all or substantially all of the uranium was produced for sale to a federal agency. The UMTRA Project is responsible for the cleanup of 24 sites in 10 states. Germany is facing nearly identical uranium cleanup problems and has established a cleanup project. At the workshop, participants had an opportunity to interact with a broad cross section of the environmental restoration and waste disposal community, discuss common concerns and problems, and develop a broader understanding of the issues. Abstracts are catalogued individually for the data base.

  1. Proceedings of Workshop on Uranium Production Environmental Restoration: An exchange between the United States and Germany

    International Nuclear Information System (INIS)

    1993-01-01

    Scientists, engineers, elected officials, and industry regulators from the United, States and Germany met in Albuquerque, New Mexico, August 16--20, 1993, in the first joint international workshop to discuss uranium tailings remediation. Entitled ''Workshop on Uranium Production Environmental Restoration: An Exchange between the US and Germany,'' the meeting was hosted by the US Department of Energy's (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project. The goal of the workshop was to further understanding and communication on the uranium tailings cleanup projects in the US and Germany. Many communities around the world are faced with an environmental legacy -- enormous quantities of hazardous and low-level radioactive materials from the production of uranium used for energy and nuclear weapons. In 1978, the US Congress passed the Uranium Mill Tailings Radiation Control Act. Title I of the law established a program to assess the tailings at inactive uranium processing sites and provide a means for joint federal and state funding of the cleanup efforts at sites where all or substantially all of the uranium was produced for sale to a federal agency. The UMTRA Project is responsible for the cleanup of 24 sites in 10 states. Germany is facing nearly identical uranium cleanup problems and has established a cleanup project. At the workshop, participants had an opportunity to interact with a broad cross section of the environmental restoration and waste disposal community, discuss common concerns and problems, and develop a broader understanding of the issues. Abstracts are catalogued individually for the data base

  2. Guidelines for the Deployment of Product-Related Environmental Legislation into Requirements for the Product Development Process

    DEFF Research Database (Denmark)

    Ferraz, Mariana; Pigosso, Daniela Cristina Antelmi; Teixeira, Cláudia Echevenguá

    2013-01-01

    Environmental legislation is increasingly changing its focus from end-of-pipe approaches to a life cycle perspective. Therefore, manufacturing companies are increasingly identifying the need of deploying and incorporating product-related environmental requirements into the product development...... process. This paper presents twelve guidelines, clustered into three groups, to support companies in the identification, analysis and deployment of product requirements from product-related environmental legislation....

  3. Environmental impact of petroleum products in the soil. Part II: Petroleum products composition and key properties

    International Nuclear Information System (INIS)

    Zerlia, T.

    2001-01-01

    The fate of petroleum hydrocarbons in the soil depends on the chemical-physic properties of each hydrocarbon, as well as on the soil characteristics. The mean composition of various petroleum products, the key chemical compounds and their characteristics are focused in order to outline the environmental behaviour of petroleum hydrocarbons in the soil [it

  4. Microalgal biomass production pathways: evaluation of life cycle environmental impacts.

    Science.gov (United States)

    Zaimes, George G; Khanna, Vikas

    2013-06-20

    Microalgae are touted as an attractive alternative to traditional forms of biomass for biofuel production, due to high productivity, ability to be cultivated on marginal lands, and potential to utilize carbon dioxide (CO2) from industrial flue gas. This work examines the fossil energy return on investment (EROIfossil), greenhouse gas (GHG) emissions, and direct Water Demands (WD) of producing dried algal biomass through the cultivation of microalgae in Open Raceway Ponds (ORP) for 21 geographic locations in the contiguous United States (U.S.). For each location, comprehensive life cycle assessment (LCA) is performed for multiple microalgal biomass production pathways, consisting of a combination of cultivation and harvesting options. Results indicate that the EROIfossil for microalgae biomass vary from 0.38 to 1.08 with life cycle GHG emissions of -46.2 to 48.9 (g CO2 eq/MJ-biomass) and direct WDs of 20.8 to 38.8 (Liters/MJ-biomass) over the range of scenarios analyzed. Further anaylsis reveals that the EROIfossil for production pathways is relatively location invariant, and that algae's life cycle energy balance and GHG impacts are highly dependent on cultivation and harvesting parameters. Contrarily, algae's direct water demands were found to be highly sensitive to geographic location, and thus may be a constraining factor in sustainable algal-derived biofuel production. Additionally, scenarios with promising EROIfossil and GHG emissions profiles are plagued with high technological uncertainty. Given the high variability in microalgae's energy and environmental performance, careful evaluation of the algae-to-fuel supply chain is necessary to ensure the long-term sustainability of emerging algal biofuel systems. Alternative production scenarios and technologies may have the potential to reduce the critical demands of biomass production, and should be considered to make algae a viable and more efficient biofuel alternative.

  5. Environmental issues of petroleum exploration and production: Introduction

    Science.gov (United States)

    Kharaka, Yousif K.; Dorsey, Nancy S.

    2005-01-01

    Energy is the lifeblood of our planet Earth, an essential commod- ity that powers the expanding global economy. Starting in the 1950s, oil and natural gas became the main sources of primary energy for the increasing world population, and this dominance is expected to continue for several more decades (Edwards, 1997; Energy Information Administration (EIA), 2004). In the United States, petroleum production started in 1859 when Drake's well was drilled near Titusville, Pennsylvania, and oil and natural gas currently supply approximately 63% of the energy consumption; forecasts indicate that by 2025, their use will increase by about 40% to 28.3 million bbl/day and to 31.4 tcf/yr (EIA, 2004). The clear benefits of petroleum consumption, however, can carry major environmental impacts that may be regional or global in scale, in- cluding air pollution, global climate change, and oil spills. This vol- ume of Environmental Geosciences, covering environmental impacts of petroleum exploration and production, does not address these major impacts directly because air pollution and global warming are issues related primarily to petroleum and coal uses, and major oil spills are generally attributed to marine petroleum transportation, such as the Exxon Valdez's 1989 spill of 260,000 bbl of oil into Prince William Sound, Alaska. Exploration for and production of petroleum, however, have caused local detrimental impacts to soils, surface and groundwa- ters, and ecosystems in the 36 producing states in the United States (Richter and Kreitler, 1993; Kharaka and Hanor, 2003). These im- pacts arose primarily from the improper disposal of some of the large volumes (presently estimated at 20 billion bbl/yr total pro- duced) of saline water produced with oil and gas, from accidental hydrocarbon and produced-water releases, and from abandoned oil wells that were orphaned or not correctly plugged (Kharaka et al., 1995; Veil et al., 2004). Impacts and ground-surface disturbances, in the order

  6. Fact sheet on uranium exploration, mining production and environmental protection

    International Nuclear Information System (INIS)

    2006-01-01

    During the last 3 years, there has been a dramatic revival and comeback of the uranium industry in the light of the expanding nuclear power programme all over the world. As a result, there has been a boom in uranium exploration, mining and production activities to meet the higher demand of uranium and reduce the gap between uranium demand and uranium supply from mines. In coming years, additional requests for TC, training/workshop and CRPs are expected in the areas of: 1) advanced aerial and ground geophysical techniques for discovery of new deposits which could be deeply buried; 2) investigations of uranium sources in sedimentary, igneous and metamorphic environments; 3) In-Situ leaching (ISL) of uranium deposits; 4) advanced acid/alkali leaching of low, medium and high grade uranium ores and purification of uranium; 5) reclamation of used uranium mines and related environmental protection issues; and 6) uranium supply, demand and market issues. Services provided by the Nuclear Fuel Cycle and Materials Section could be workshops and hands-on field trainings at National and/or Regional levels in mines, mills and sites covering the following activities: uranium exploration involving conventional and advanced geophysical techniques and instruments, advanced drilling equipment and tools, etc.; uranium mining (open-cast and underground), recovery and purification by acid/alkali leaching, In-Situ leaching (ISL), purification by conventional and advanced solvent extraction and ion exchange techniques and concentration of uranium in the form of yellowcake (ammonium diuranate, magnesium diuranate and uranium peroxide); promoting best practices in uranium mining and milling (including tailing pond), covering environmental issues, reclamation of used uranium mines and chemistry of uranium production cycle and ground water and sustainability of uranium production. Member States interested in uranium geology, exploration, mining, milling, purification and environmental issues

  7. Recycled aggregates in concrete production: engineering properties and environmental impact

    Directory of Open Access Journals (Sweden)

    Seddik Meddah Mohammed

    2017-01-01

    Full Text Available Recycled concrete aggregate is considered as the most abundant and used secondary aggregate in concrete production, other types of solid waste are also being used in concrete for specific purposes and to achieve some desired properties. Recycled aggregates and particularly, recycled concrete aggregate substantially affect the properties and mix design of concrete both at fresh and hardened states since it is known by high porosity due to the adhered layer of old mortar on the aggregate which results in a high water absorption of the recycled secondary aggregate. This leads to lower density and strength, and other durability related properties. The use of most recycled aggregate in concrete structures is still limited to low strength and non-structural applications due to important drop in strength and durability performances generated. Embedding recycled aggregates in concrete is now a current practice in many countries to enhance sustainability of concrete industry and reduce its environmental impacts. The present paper discusses the various possible recycled aggregates used in concrete production, their effect on both fresh and hardened properties as well as durability performances. The economic and environmental impacts of partially or fully substituting natural aggregates by secondary recycled aggregates are also discussed.

  8. Nickel production in Serbia-technological and environmental aspects

    Directory of Open Access Journals (Sweden)

    Željko Kamberović

    2014-12-01

    Full Text Available Demand for nickel is constantly growing due to the versatility of its application, at the first place for stainless steel production. Ore reserves and possibility of nickel production of today’s Serbia and in neighboring countries were thoroughly investigated, and presented work is part of a wider project of sublimation of scientific and professional experience in the field of nickel extractive metallurgy on domestic raw materials. Presented research explores the possibility of high pressure sulfuric acid leaching of Serbian lateritic ores from localities Rudjinci, Ba and Lipovac. All three investigated ore deposits behaved differently both during preparation and during hydrometallurgical treatment. As optimal method for ore preparation proved to be crushing-milling-sieving route, but without possibility of concentrate production. Only for Rudjinci ore deposit achieved leaching efficiency reached satisfactory level of 95%. Within presented paper flow-sheet is proposed for processing high-magnesium laterite ores, with iron and magnesium oxide Both could be recirculated and used again in technological process; MgO for iron precipitation and SO2 for production of leaching agent, sulfuric acid. Final decision on the sustainability of the process will be made according to techno-economic and environmental evaluation. Estimated overall impact of the project implementation on the environment is negative.

  9. Environmental impacts of biomass energy resource production and utilization

    Energy Technology Data Exchange (ETDEWEB)

    Easterly, J L; Dunn, S M [DynCorp, Alexandria, VA (United States)

    1995-12-01

    The purpose of this paper is to provide a broad overview of the environmental impacts associated with the production, conversion and utilization of biomass energy resources and compare them with the impacts of conventional fuels. The use of sustainable biomass resources can play an important role in helping developing nations meet their rapidly growing energy needs, while providing significant environmental advantages over the use of fossil fuels. Two of the most important environmental benefits biomass energy offers are reduced net emissions of greenhouse gases, particularly CO{sub 2}, and reduced emissions of SO{sub 2}, the primary contributor to acid rain. The paper also addresses the environmental impacts of supplying a range of specific biomass resources, including forest-based resources, numerous types of biomass residues and energy crops. Some of the benefits offered by the various biomass supplies include support for improved forest management, improved waste management, reduced air emissions (by eliminating the need for open-field burning of residues) and reduced soil erosion (for example, where perennial energy crops are planted on degraded or deforested land). The environmental impacts of a range of biomass conversion technologies are also addressed, including those from the thermochemical processing of biomass (including direct combustion in residential wood stoves and industrial-scale boilers, gasification and pyrolysis); biochemical processing (anaerobic digestion and fermentation); and chemical processing (extraction of organic oils). In addition to reducing CO{sub 2} and SO{sub 2}, other environmental benefits of biomass conversion technologies include the distinctly lower toxicity of the ash compared to coal ash, reduced odours and pathogens from manure, reduced vehicle emissions of CO{sub 2}, with the use of ethanol fuel blends, and reduced particulate and hydrocarbon emissions where biodiesel is used as a substitute for diesel fuel. In general

  10. Environmental review of natural gas production in Lake Erie

    International Nuclear Information System (INIS)

    O'Shea, K.

    2002-01-01

    The water of Lake Erie is used as a source of drinking water for Ontario, New York, Pennsylvania, Ohio and Michigan. An environmental review has been conducted to determine the impact of drilling operations on the overall ecology of the lake. Since 1913, 2000 natural gas wells have been drilled in Lake Erie, of which 550 currently produce gas and account for 75 per cent of Ontario's total gas production. 180 wells are shut-in or suspended and the remaining wells have been abandoned. The gas wells are connected to onshore production facilities by approximately 1,600 km of small diameter pipelines that lie buried near shore or on top of the lake bed. Nearly 90 per cent of the in-lake infrastructure is in water depths of more than 20 metres. Talisman Energy is actively involved with the Canadian Coast Guard, the Department of Fisheries and Oceans, and the Ministry of Natural Resources to ensure cooperation between regulators and off-shore personnel. The environmental assessment of natural gas production in Lake Erie included a review of regulatory and best management practices, a biophysical overview of the lake, and a review of drilling practices, well completions, handling of waste streams, materials management, operations inspections, wastewater discharge, air emissions, and oil spills. It was revealed that for most drilling programs, cuttings are washed and discharged to the Lake. Ongoing testing will determine the impact that this practice has on benthic populations. The drill muds used for drilling operations are water based, environmentally friendly, and re-used between well locations. For completion programs, all well activities are closed circuit operations. Wells are abandoned through plugging with cement, removing wellheads and casing below the lake bottom. There has been a reported volume of about 23,000 litres of spilled product from 1990 to 2001, of which 68 per cent has come from 3 industrial companies that operate near Lake Erie. The offshore gas

  11. Environmental and economic assessment of a road safety product made with virgin and recycled HDPE: a comparative study.

    Science.gov (United States)

    L Simões, Carla; Costa Pinto, Lígia M; Bernardo, C A

    2013-01-15

    The development of value-added products made from post-consumer plastic recyclates has become an important goal in the quest for a sustainable society. To attain such goal, tools with higher accuracy and wider scope are increasingly necessary. The present work describes the application of a Life Cycle Assessment (LCA)/Life Cycle Costing (LCC) integrated model, with inclusion of externalities (environmental and social costs), to Anti-Glare Lamellae (AGL) made with High Density Polyethylene (HDPE). It compares an AGL currently manufactured from virgin HDPE (current AGL) with an alternative one made with recycled HDPE (optional AGL). The results obtained show that neither the current nor the optional AGL depict the best environmental performance in all impact categories. Nevertheless, there is a clear overall environmental and economic advantage in replacing virgin HDPE with recycled HDPE. The present work also makes evident that the LCA/LCC integrated model allows the identification of economic and environmental win-win and trade-off situations related to the full life cycle of products. As such, its results can be used as valuable guidelines in product development. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. The effects assessment of firm environmental strategy and customer environmental conscious on green product development.

    Science.gov (United States)

    Tsai, Ming-Tien; Chuang, Li-Min; Chao, Shu-Tsung; Chang, Hsiao-Ping

    2012-07-01

    The purpose of this study is to examine why both parties (industry and consumer market) have mutual interests in protecting the environment but they still are hesitant to act green. The study used two-stage sampling from consumer market to depict ideal green product characteristics and reliable toy companies, and visit these companies for the second sample collection to examine whether the organizational eco-innovation strategy with customer value has a positive effect on green product development. In other words, the customer's benefit is an important factor for new product development strategy for green toys. This research shows that the willingness to buy green toys increases if most people in society buy green toys. This represents that customers are environmentally conscious and care about protecting the environment, or buying green toys is the result of a new economic trend and childhood education. The willingness to buy green toys increases if customers think that green products implies an enhancement on new product development to toy manufacturers. Further, if manufacturers are able to manage the difficulty of cooperation with all parties in the supply chain and difficulties related to production, they are willing to adopt customers' perceived value on green toys for their new product development strategy. It is rare to find academic research discussing the perspectives of both consumers and manufacturers in the same study because the research topic is very broad and many conditions must be considered. This research aims to find the effect of consumer-perceived value and company eco-innovation on green product development.

  13. Investigating the impact of environmental attitude on the decision to purchase a green product with the mediating role of environmental concern and care for green products

    OpenAIRE

    Esmaeilpour Majid; Bahmiary Elahe

    2017-01-01

    The intention to purchase green products is the tendency of a person who prefers to purchase a product with optimal environmental characteristics rather than usual products. Nowadays, the environment is very important and maintaining it is a vital issue for all groups of people, whether in the customer's position or in the distributor’s position. However, in spite of the increased environmental awareness among consumers and encouragements made by producers for them to buy green products, we r...

  14. Environmental impacts and sustainability of egg production systems.

    Science.gov (United States)

    Xin, H; Gates, R S; Green, A R; Mitloehner, F M; Moore, P A; Wathes, C M

    2011-01-01

    As part of a systemic assessment toward social sustainability of egg production, we have reviewed current knowledge about the environmental impacts of egg production systems and identified topics requiring further research. Currently, we know that 1) high-rise cage houses generally have poorer air quality and emit more ammonia than manure belt (MB) cage houses; 2) manure removal frequency in MB houses greatly affects ammonia emissions; 3) emissions from manure storage are largely affected by storage conditions, including ventilation rate, manure moisture content, air temperature, and stacking profile; 4) more baseline data on air emissions from high-rise and MB houses are being collected in the United States to complement earlier measurements; 5) noncage houses generally have poorer air quality (ammonia and dust levels) than cage houses; 6) noncage houses tend to be colder during cold weather due to a lower stocking density than caged houses, leading to greater feed and fuel energy use; 7) hens in noncage houses are less efficient in resource (feed, energy, and land) utilization, leading to a greater carbon footprint; 8) excessive application of hen manure to cropland can lead to nutrient runoff to water bodies; 9) hen manure on open (free) range may be subject to runoff during rainfall, although quantitative data are lacking; 10) mitigation technologies exist to reduce generation and emission of noxious gases and dust; however, work is needed to evaluate their economic feasibility and optimize design; and 11) dietary modification shows promise for mitigating emissions. Further research is needed on 1) indoor air quality, barn emissions, thermal conditions, and energy use in alternative hen housing systems (1-story floor, aviary, and enriched cage systems), along with conventional housing systems under different production conditions; 2) environmental footprint for different US egg production systems through life cycle assessment; 3) practical means to mitigate air

  15. Potential Fusion Market for Hydrogen Production Under Environmental Constraints

    International Nuclear Information System (INIS)

    Konishi, Satoshi

    2005-01-01

    Potential future hydrogen market and possible applications of fusion were analyzed. Hydrogen is expected as a major energy and fuel mediun for the future, and various processes for hydrogen production can be considered as candidates for the use of fusion energy. In order to significantly contribute to reduction of CO 2 emission, fusion must be deployed in developing countries, and must substitute fossil based energy with synthetic fuel such as hydrogen. Hydrogen production processes will have to evaluated and compared from the aspects of energy efficiency and CO 2 emission. Fusion can provide high temperature heat that is suitable for vapor electrolysis, thermo-chemical water decomposition and steam reforming with biomass waste. That is a possible advantage of fusion over renewables and Light water power reactor. Despite of its technical difficulty, fusion is also expected to have less limitation for siting location in the developing countries. Under environmental constraints, fusion has a chance to be a major primary energy source, and production of hydrogen enhances its contribution, while in 'business as usual', fusion will not be selected in the market. Thus if fusion is to be largely used in the future, meeting socio-economic requirements would be important

  16. Product-oriented environmental management. A study of capability building, stakeholder orientation and continuous improvement regarding products' environmental characteristics in firms

    NARCIS (Netherlands)

    de Bakker, F.G.A.

    2001-01-01

    Companies are increasingly giving attention to the environmental characteristics of their products. This book focuses on the ways in which large, proactive, firms could develop and maintain product-oriented environmental management (POEM), both at the strategic and the operational level. POEM is

  17. Impact of Environmental Regulation on Productivity: Case Studies of Three Industries in Japan

    OpenAIRE

    Chalermthanakom, Adisak; Ueta, Kazuhiro

    2011-01-01

    Although fi rms bear the cost of compliance, strict but fl exible environmental regulation may benefi t them by spurring the innovation process. However, the relationship between environmental regulation and productivity is unclear. We calculate productivity growth by using data envelopment analysis; we then conduct regression analysis, using panel data on productivity growth by environmental regulation stringency. A one-year lag of environmental regulation stringency is included in the model...

  18. A Daily-Adjusted Goal-Setting and Feedback Procedure for Improving Productivity in a University Admissions Department.

    Science.gov (United States)

    Wilk, Leslie A.; Redmon, William K.

    1990-01-01

    Daily goals set by supervisors and feedback were used with three female application processors in a college admissions office. After 39 weeks, comparison with baseline data showed large increases in the amount of work done and decreases in overtime, use of temporaries, and absenteeism. (SK)

  19. A simulation-based approach for evaluating and comparing the environmental footprints of beef production systems.

    Science.gov (United States)

    Rotz, C A; Isenberg, B J; Stackhouse-Lawson, K R; Pollak, E J

    2013-11-01

    A methodology was developed and used to determine environmental footprints of beef cattle produced at the U.S. Meat Animal Research Center (MARC) in Clay Center, NE, with the goal of quantifying improvements achieved over the past 40 yr. Information for MARC operations was gathered and used to establish parameters representing their production system with the Integrated Farm System Model. The MARC farm, cow-calf, and feedlot operations were each simulated over recent historical weather to evaluate performance, environmental impact, and economics. The current farm operation included 841 ha of alfalfa and 1,160 ha of corn to produce feed predominately for the beef herd of 5,500 cows, 1,180 replacement cattle, and 3,724 cattle finished per year. Spring and fall cow-calf herds were fed on 9,713 ha of pastureland supplemented through the winter with hay and silage produced by the farm operation. Feedlot cattle were backgrounded for 3 mo on hay and silage with some grain and finished over 7 mo on a diet high in corn and wet distillers grain. For weather year 2011, simulated feed production and use, energy use, and production costs were within 1% of actual records. A 25-yr simulation of their current production system gave an average annual carbon footprint of 10.9±0.6 kg of CO2 equivalent units per kg BW sold, and the energy required to produce that beef (energy footprint) was 26.5±4.5 MJ/kg BW. The annual water required (water footprint) was 21,300±5,600 L/kg BW sold, and the water footprint excluding precipitation was 2,790±910 L/kg BW. The simulated annual cost of producing their beef was US$2.11±0.05/kg BW. Simulation of the production practices of 2005 indicated that the inclusion of distillers grain in animal diets has had a relatively small effect on environmental footprints except that reactive nitrogen loss has increased 10%. Compared to 1970, the carbon footprint of the beef produced has decreased 6% with no change in the energy footprint, a 3% reduction

  20. Environmental Compliance for Oil and Gas Exploration and Production

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Christine

    1999-10-26

    The Appalachian/Illinois Basin Directors is a group devoted to increasing communication among the state oil and gas regulatory agencies within the Appalachian and Illinois Basin producing region. The group is comprised of representatives from the oil and gas regulatory agencies from states in the basin (Attachment A). The directors met to discuss regulatory issues common to the area, organize workshops and seminars to meet the training needs of agencies dealing with the uniqueness of their producing region and perform other business pertinent to this area of oil and gas producing states. The emphasis of the coordinated work was a wide range of topics related to environmental compliance for natural gas and oil exploration and production.

  1. Financial incentive for the Environmental Quality of Electricity Production (MEP)

    International Nuclear Information System (INIS)

    2007-01-01

    With the MEP subsidy regulation 'Environmental quality of electricity production' The Dutch minister of Economic Affairs focussed mainly on reaching the policy objective of the EU according to which 9% of all electricity used in the Netherlands should be generated with sustainable sources. According to the opinion of the Dutch Court of Audits not enough attention has been paid to the coherence of the MEP regulation with other policy objectives in the area of sustainability, such as air quality and CO2 reduction. The same goes for the effectiveness and the financial management of the MEP regulation. Moreover, the study, which was carried out by request of the Dutch Lower House, demonstrates that it is still uncertain if the policy objective for 2010 will be reached. The report consists of two parts: part 1: Conclusions, recommendations and administrative reactions, and Part 2: Answering Lower House questions.(mk) [nl

  2. Concept Study: Exploration and Production in Environmentally Sensitive Arctic Areas

    Energy Technology Data Exchange (ETDEWEB)

    Shirish Patil; Rich Haut; Tom Williams; Yuri Shur; Mikhail Kanevskiy; Cathy Hanks; Michael Lilly

    2008-12-31

    The Alaska North Slope offers one of the best prospects for increasing U.S. domestic oil and gas production. However, this region faces some of the greatest environmental and logistical challenges to oil and gas production in the world. A number of studies have shown that weather patterns in this region are warming, and the number of days the tundra surface is adequately frozen for tundra travel each year has declined. Operators are not allowed to explore in undeveloped areas until the tundra is sufficiently frozen and adequate snow cover is present. Spring breakup then forces rapid evacuation of the area prior to snowmelt. Using the best available methods, exploration in remote arctic areas can take up to three years to identify a commercial discovery, and then years to build the infrastructure to develop and produce. This makes new exploration costly. It also increases the costs of maintaining field infrastructure, pipeline inspections, and environmental restoration efforts. New technologies are needed, or oil and gas resources may never be developed outside limited exploration stepouts from existing infrastructure. Industry has identified certain low-impact technologies suitable for operations, and has made improvements to reduce the footprint and impact on the environment. Additional improvements are needed for exploration and economic field development and end-of-field restoration. One operator-Anadarko Petroleum Corporation-built a prototype platform for drilling wells in the Arctic that is elevated, modular, and mobile. The system was tested while drilling one of the first hydrate exploration wells in Alaska during 2003-2004. This technology was identified as a potentially enabling technology by the ongoing Joint Industry Program (JIP) Environmentally Friendly Drilling (EFD) program. The EFD is headed by Texas A&M University and the Houston Advanced Research Center (HARC), and is co-funded by the National Energy Technology Laboratory (NETL). The EFD

  3. Impact Assessment and Environmental Evaluation of Various Ammonia Production Processes

    Science.gov (United States)

    Bicer, Yusuf; Dincer, Ibrahim; Vezina, Greg; Raso, Frank

    2017-05-01

    In the current study, conventional resources-based ammonia generation routes are comparatively studied through a comprehensive life cycle assessment. The selected ammonia generation options range from mostly used steam methane reforming to partial oxidation of heavy oil. The chosen ammonia synthesis process is the most common commercially available Haber-Bosch process. The essential energy input for the methods are used from various conventional resources such as coal, nuclear, natural gas and heavy oil. Using the life cycle assessment methodology, the environmental impacts of selected methods are identified and quantified from cradle to gate. The life cycle assessment outcomes of the conventional resources based ammonia production routes show that nuclear electrolysis-based ammonia generation method yields the lowest global warming and climate change impacts while the coal-based electrolysis options bring higher environmental problems. The calculated greenhouse gas emission from nuclear-based electrolysis is 0.48 kg CO2 equivalent while it is 13.6 kg CO2 per kg of ammonia for coal-based electrolysis method.

  4. Impact Assessment and Environmental Evaluation of Various Ammonia Production Processes.

    Science.gov (United States)

    Bicer, Yusuf; Dincer, Ibrahim; Vezina, Greg; Raso, Frank

    2017-05-01

    In the current study, conventional resources-based ammonia generation routes are comparatively studied through a comprehensive life cycle assessment. The selected ammonia generation options range from mostly used steam methane reforming to partial oxidation of heavy oil. The chosen ammonia synthesis process is the most common commercially available Haber-Bosch process. The essential energy input for the methods are used from various conventional resources such as coal, nuclear, natural gas and heavy oil. Using the life cycle assessment methodology, the environmental impacts of selected methods are identified and quantified from cradle to gate. The life cycle assessment outcomes of the conventional resources based ammonia production routes show that nuclear electrolysis-based ammonia generation method yields the lowest global warming and climate change impacts while the coal-based electrolysis options bring higher environmental problems. The calculated greenhouse gas emission from nuclear-based electrolysis is 0.48 kg CO 2 equivalent while it is 13.6 kg CO 2 per kg of ammonia for coal-based electrolysis method.

  5. Environmental remediation with products of fluidized bed combustion

    Energy Technology Data Exchange (ETDEWEB)

    Kim, A.G.

    1999-07-01

    Commercialization of fluidized bed combustion (FBC) technology could be enhanced by increased utilization of FBC products (ash). In the US, coal combustion products (CCP) are not hazardous under RCRA and are regulated as residual waste by the states. The composition of CCP from fluidized beds is primarily determined by the inorganic constituents in coal, the sorbent reaction products and the unreacted sorbent. The combustion system and the inclusion of other fuels may also affect the chemical composition, physical properties and leaching behavior. The alkalinity of the FBC material, residual lime and pozzolanic properties are desirable characteristics for use in soil stabilization and mine reclamation. At reclaimed surface coal mines, placement of CCP is intended to reduce the amount of acid mine drainage (AMD) produced at such sites. Neutralization, inhibition of acid forming bacteria, encapsulation of the pyrite or water diversion are believed to be the mechanisms facilitated by the alkaline material. Comparison of water quality, before and after injection of a grout composed of FBC ash and water indicated small increases in pH and decreases in acidity at discharge points. The concentrations of calcium and magnesium in water samples generally increased compared to background levels. The average concentration of trace elements (arsenic, cobalt, copper, nickel and zinc) was slightly elevated in the injection areas, but in down dip and discharge water samples were comparable to background levels. Over a four year period, the average acidity in the injected area decreased by approximately 30%, a value similar to another site where a mixture of class F fly ash and cement was injected. Although coal mine remediation is a beneficial environmental use of FBC products, its effectiveness may be related to the amount of FBCB used and the method of emplacement.

  6. Environmental remediation with products of fluidized bed combustion

    International Nuclear Information System (INIS)

    Kim, A.G.

    1999-01-01

    Commercialization of fluidized bed combustion (FBC) technology could be enhanced by increased utilization of FBC products (ash). In the US, coal combustion products (CCP) are not hazardous under RCRA and are regulated as residual waste by the states. The composition of CCP from fluidized beds is primarily determined by the inorganic constituents in coal, the sorbent reaction products and the unreacted sorbent. The combustion system and the inclusion of other fuels may also affect the chemical composition, physical properties and leaching behavior. The alkalinity of the FBC material, residual lime and pozzolanic properties are desirable characteristics for use in soil stabilization and mine reclamation. At reclaimed surface coal mines, placement of CCP is intended to reduce the amount of acid mine drainage (AMD) produced at such sites. Neutralization, inhibition of acid forming bacteria, encapsulation of the pyrite or water diversion are believed to be the mechanisms facilitated by the alkaline material. Comparison of water quality, before and after injection of a grout composed of FBC ash and water indicated small increases in pH and decreases in acidity at discharge points. The concentrations of calcium and magnesium in water samples generally increased compared to background levels. The average concentration of trace elements (arsenic, cobalt, copper, nickel and zinc) was slightly elevated in the injection areas, but in down dip and discharge water samples were comparable to background levels. Over a four year period, the average acidity in the injected area decreased by approximately 30%, a value similar to another site where a mixture of class F fly ash and cement was injected. Although coal mine remediation is a beneficial environmental use of FBC products, its effectiveness may be related to the amount of FBCB used and the method of emplacement

  7. Increasing Cropping System Diversity Balances Productivity, Profitability and Environmental Health

    Science.gov (United States)

    Davis, Adam S.; Hill, Jason D.; Chase, Craig A.; Johanns, Ann M.; Liebman, Matt

    2012-01-01

    Balancing productivity, profitability, and environmental health is a key challenge for agricultural sustainability. Most crop production systems in the United States are characterized by low species and management diversity, high use of fossil energy and agrichemicals, and large negative impacts on the environment. We hypothesized that cropping system diversification would promote ecosystem services that would supplement, and eventually displace, synthetic external inputs used to maintain crop productivity. To test this, we conducted a field study from 2003–2011 in Iowa that included three contrasting systems varying in length of crop sequence and inputs. We compared a conventionally managed 2-yr rotation (maize-soybean) that received fertilizers and herbicides at rates comparable to those used on nearby farms with two more diverse cropping systems: a 3-yr rotation (maize-soybean-small grain + red clover) and a 4-yr rotation (maize-soybean-small grain + alfalfa-alfalfa) managed with lower synthetic N fertilizer and herbicide inputs and periodic applications of cattle manure. Grain yields, mass of harvested products, and profit in the more diverse systems were similar to, or greater than, those in the conventional system, despite reductions of agrichemical inputs. Weeds were suppressed effectively in all systems, but freshwater toxicity of the more diverse systems was two orders of magnitude lower than in the conventional system. Results of our study indicate that more diverse cropping systems can use small amounts of synthetic agrichemical inputs as powerful tools with which to tune, rather than drive, agroecosystem performance, while meeting or exceeding the performance of less diverse systems. PMID:23071739

  8. Environmental monitoring and management of contaminated territories for clean product production

    International Nuclear Information System (INIS)

    Goncharova, N.; Bajrasheuskaya, D.; Laberch, J.-C.; Pohu, J.

    2006-01-01

    Current research interests are focussing into two major research problems with immense environmental importance and impact to society. These two areas of interest are (a) the radioactive pollution of an ecosystem and, particularly, the behavior of the radionuclides in soil and the pollution of plants which participate in human's food and (b) the production of municipal solid wastes and the problem of uncontrolled disposal and its negative effects to the environment. (authors)

  9. Signalling product healthiness through symbolic package cues: Effects of package shape and goal congruence on consumer behaviour.

    NARCIS (Netherlands)

    van Ooijen, Iris; Fransen, Marieke L; Verlegh, Peeter W J; Smit, Edith G

    2016-01-01

    Three studies show that product packaging shape serves as a cue that communicates healthiness of food products. Inspired by embodiment accounts, we show that packaging that simulates a slim body shape acts as a symbolic cue for product healthiness (e.g., low in calories), as opposed to packaging

  10. Application of life cycle assessment to production processes of environmentally sustainable concrete, prepared with artificial aggregates

    International Nuclear Information System (INIS)

    Vaccaro, R.; Colangelo, F.; Palumbo, M.; Cioffi, R.

    2005-01-01

    This paper is about the application of Life Cycle Assessment (L.C.A.) on environmentally sustainable concrete production processes. The goal of this experimentations is to assess environmental impact and energy demand related to concrete production, by using, in different admixtures, natural and artificial aggregates, belonging from treatments of different kind of industrial wastes characterized by very small particle sizes. Particular attention was concentrated on the utilization of fine fraction since it is difficult to recover in usual fields of recycling (i.e. aggers, crowl spaces, etc.). This study follows the approach from cradle to cradle. This experimentation was conducted in relation to four concrete admixtures produced, one of them containing only natural aggregate, and the other ones obtained by substituting the 10% of aggregate respectively with inert wastes as construction and demolition waste (CeD waste). cement kiln dust (CKD) and marble sludge. For all admixtures six different end-life scenarios have been proposed, one of them considers all materials transported in landfill while the other ones consider a partial transportation on landfill (15%) and a recycle of the 85% of wastes obtained after demolition of structures [it

  11. Helping people build a better world? Barriers to more environmentally friendly energy production in China: the case of Shell

    Energy Technology Data Exchange (ETDEWEB)

    Buan, Inga Fritzen

    2008-03-15

    China's rapid industrialization and economic expansion are causing massive environmental damage, with consequences beyond the country's borders, especially due to the use of fossil fuels' effect on climate change. Shell China can contribute to making energy production, if not clean and sustainable, then cleaner and more sustainable by making existing energy production more environmentally friendly; by diversifying and developing alternative energy sources; and by creating precedence influencing others to follow in its footsteps. The first goal of this report is to identify and analyze changes that have happened in the Shell Group since the 1990s when energy companies started their 'greening' processes. These changed happened due to stricter environmental legislation, increased civil society pressure and media scrutiny. Changes on the global and headquarters level in a company do not, however, necessitate similar developments in its national and local level operations. The second goal is thus to analyze to which degree the changes in the Shell Group have had relevance for Shell China and whether barriers in the Chinese context influence its prospects to operate in a more environmentally friendly way. (author). 64 refs

  12. Investigating the impact of environmental attitude on the decision to purchase a green product with the mediating role of environmental concern and care for green products

    Directory of Open Access Journals (Sweden)

    Esmaeilpour Majid

    2017-06-01

    Full Text Available The intention to purchase green products is the tendency of a person who prefers to purchase a product with optimal environmental characteristics rather than usual products. Nowadays, the environment is very important and maintaining it is a vital issue for all groups of people, whether in the customer's position or in the distributor’s position. However, in spite of the increased environmental awareness among consumers and encouragements made by producers for them to buy green products, we require further investigation in this area in order to increase green purchasing among different group of people. The main objective of this study is to investigate the impact of the environmental attitude on the decision to purchase a green product with the mediating role of environmental concerns and care for green products. This research is an applied research, and correlational-descriptive in terms of data analysis. The research population includes consumers from Bushehr city, sampled based on availability. In this research, 300 questionnaires were distributed among consumers. Structural equation modeling was used to analyze the data. The findings of this research showed that the environmental attitude of customers has significant and positive impact on caring for green products and environmental concerns. In addition, environmental concerns and care for green products have a significant and positive impact on green purchasing decision.

  13. The environmental impacts of foamed concrete production and exploitation

    Science.gov (United States)

    Namsone, E.; Korjakins, A.; Sahmenko, G.; Sinka, M.

    2017-10-01

    This paper presents a study focusing on the environmental impacts of foamed concrete production and exploitation. CO2 emissions are very important factor for describing durability and sustainability of any building material and its life cycle. The building sector is one of the largest energy-consuming sectors in the world. In this study CO2 emissions are evaluated with regard to three types of energy resources (gas, coal and eco-friendly fuel). The related savings on raw materials are up to 120 t of water per 1000 t of traditionally mixed foamed concrete and up to 350 t of sand per 1000 t of foamed concrete produced with intensive mixing technology. In addition, total reduction of CO2 emissions (up to 60 t per 1000 m3 of material) and total energy saving from introduction of foamed concrete production (depending on the type of fuel) were calculated. In order to analyze the conditions of exploitation, both thermal conductivity and thickness of wall was determined. All obtained and calculated results were compared to those of the commercially produced autoclaved aerated concrete.

  14. Integration of landslide susceptibility products in the environmental plans

    Science.gov (United States)

    Fiorucci, Federica; Reichenbach, Paola; Rossi, Mauro; Cardinali, Mauro; Guzzetti, Fausto

    2015-04-01

    Landslides are one of the most destructive natural hazard that causes damages to urban area worldwide. The knowledge of where a landslide could occur is essential for the strategic management of the territory and for a good urban planning . In this contest landslide susceptibility zoning (LSZ) is crucial to provide information on the degree to which an area can be affected by future slope movements. Despite landslide susceptibility maps have been prepared extensively during the last decades, there are few examples of application is in the environmental plans (EP). In this work we present a proposal for the integration of the landslide inventory map with the following landslide susceptibility products: (i) landslide susceptibility zonation , (ii) the associated error map and (iii) the susceptibility uncertainty map. Moreover we proposed to incorporate detailed morphological studies for the evaluation of landslide risk associated to local parceling plan. The integration of all this information is crucial for the management of landslide risk in urban expansions forecasts. Municipality, province and regional administration are often not able to support the costs of landslide risk evaluation for extensive areas but should concentrate their financial resources to specific hazardous and unsafe situations defined by the result of the integration of landslide susceptibility products. Zonation and detail morphological analysis should be performed taking into account the existing laws and regulations, and could become a starting point to discuss new regulations for the landslide risk management.

  15. Industry efficiency and total factor productivity growth under resources and environmental constraint in China.

    Science.gov (United States)

    Tao, Feng; Li, Ling; Xia, X H

    2012-01-01

    The growth of China's industry has been seriously depending on energy and environment. This paper attempts to apply the directional distance function and the Luenberger productivity index to measure the environmental efficiency, environmental total factor productivity, and its components at the level of subindustry in China over the period from 1999 to 2009 while considering energy consumption and emission of pollutants. This paper also empirically examines the determinants of efficiency and productivity change. The major findings are as follows. Firstly, the main sources of environmental inefficiency of China's industry are the inefficiency of gross industrial output value, the excessive energy consumption, and pollutant emissions. Secondly, the highest growth rate of environmental total factor productivity among the three industrial categories is manufacturing, followed by mining, and production and supply of electricity, gas, and water. Thirdly, foreign direct investment, capital-labor ratio, ownership structure, energy consumption structure, and environmental regulation have varying degrees of effects on the environmental efficiency and environmental total factor productivity.

  16. Characteristics of environmentally conscious production behaviour in agricultural waste management

    OpenAIRE

    Kormosne-Koch, Krisztina

    2008-01-01

    When measuring environmentally conscious behaviour and determining its variables, focus often lies only on consumers, but environmental conservation requires not only the consumers’ but also the producers’ input. After defining environmentally conscious behaviour, I utilized the market research method to determine how participating in agri-environmental programs and subsidies affects producers’ environmental consciousness and waste management behaviour. The research result indicates tha...

  17. Practical approach to environmental protection in the exploration and production industry

    International Nuclear Information System (INIS)

    Emmons, L.N.

    1994-01-01

    Environmental protection is a major issue throughout the world. Effective environmental protection techniques exist that are simple, creative, practical, and often cost effective. The cornerstone of cost effective environmental protection is an environmental management system. Various techniques are also available for reducing wastes, minimizing spills, remediating soils, reducing air emissions, and protecting groundwater and surface water in exploration and production operations

  18. Using Remote Sensing Products for Environmental Analysis in South America

    Directory of Open Access Journals (Sweden)

    Fabrício Brito Silva

    2011-09-01

    Full Text Available Land cover plays a major role in many biogeochemical models that represent processes and connections with terrestrial systems; hence, it is a key component for public decisions in ecosystems management. The advance of remote sensing technology, combined with the emergence of new operational products, offers alternatives to improve the accuracy of environmental monitoring and analysis. This work uses the GLOBCOVER, the Vegetation Continuous Field (VCF, MODIS Fire Radiative Power (FRP and the Tropical Rainfall Measuring Mission (TRMM remotely sensed databases to analyze the biomass burning distribution, the land use and land cover characteristics and the percent of tree cover in South America during the years 2000 to 2005. Initially, GLOBCOVER was assessed based on VCF product, and subsequently used for quantitative analysis of the spatial distribution of the South America fires with the fire radiative power (FRP. The results show that GLOBCOVER has a tendency to overestimate forest classes and to underestimate urban and mangroves areas. The fire quantification based on GLOBCOVER product shows that the highest incidence of fires can be observed in the arc of deforestation, located in the Amazon forest border, with vegetation cover composed mainly of broadleaved evergreen or semi-deciduous forest. A time series analysis of FRP database indicates that biomass burning occurs mainly in areas of broadleaved evergreen or semi-deciduous forest and in Brazilian Cerrado associated with grassland management, agricultural land clearing and with the deforestation of Amazon tropical rainforest. Also, variations in FRP intensity and spread can be attributed to rainfall anomalies, such as in 2004, when South America had a positive anomaly rainfall.

  19. TESPI (Tool for Environmental Sound Product Innovation): a simplified software tool to support environmentally conscious design in SMEs

    Science.gov (United States)

    Misceo, Monica; Buonamici, Roberto; Buttol, Patrizia; Naldesi, Luciano; Grimaldi, Filomena; Rinaldi, Caterina

    2004-12-01

    TESPI (Tool for Environmental Sound Product Innovation) is the prototype of a software tool developed within the framework of the "eLCA" project. The project, (www.elca.enea.it)financed by the European Commission, is realising "On line green tools and services for Small and Medium sized Enterprises (SMEs)". The implementation by SMEs of environmental product innovation (as fostered by the European Integrated Product Policy, IPP) needs specific adaptation to their economic model, their knowledge of production and management processes and their relationships with innovation and the environment. In particular, quality and costs are the main driving forces of innovation in European SMEs, and well known barriers exist to the adoption of an environmental approach in the product design. Starting from these considerations, the TESPI tool has been developed to support the first steps of product design taking into account both the quality and the environment. Two main issues have been considered: (i) classic Quality Function Deployment (QFD) can hardly be proposed to SMEs; (ii) the environmental aspects of the product life cycle need to be integrated with the quality approach. TESPI is a user friendly web-based tool, has a training approach and applies to modular products. Users are guided through the investigation of the quality aspects of their product (customer"s needs and requirements fulfilment) and the identification of the key environmental aspects in the product"s life cycle. A simplified check list allows analyzing the environmental performance of the product. Help is available for a better understanding of the analysis criteria. As a result, the significant aspects for the redesign of the product are identified.

  20. Industrial goals

    International Nuclear Information System (INIS)

    Martin, P.

    2005-01-01

    The aim of the third seminar on pellet-clad interaction, which held at Aix en Provence (France) from 9-11 march 2004, was to draw a comprehensive picture of current understanding of pellet clad interaction and its impact on the fuel rod under the widest possible conditions. This document provides the summaries of the five sessions: opening and industrial goals, fuel material behaviour in PCI situation, cladding behaviour relevant to PCI, in-pile rod behaviour, modelling of the mechanical interaction between pellet and cladding. (A.L.B.)

  1. Examining the Extent of Environmental Compliance Requirements on Mechatronic Products and Their Implementation through Product Lifecycle Management

    Science.gov (United States)

    Jovanovic, Vukica

    2010-01-01

    The present mixed-methods study examined the opinions of industry practitioners related to the implementation of environmental compliance requirements into design and manufacturing processes of mechatronic and electromechanical products. It focused on the environmental standards for mechatronic and electromechanical products and how Product…

  2. Lessons for South Africa from global trends in environmental labelling of buildings and construction products

    CSIR Research Space (South Africa)

    Ampofo-Anti, NL

    2012-02-01

    Full Text Available This chapter examines the international state-of-the-art of environmental labelling of buildings and construction products; and discusses ways in which the emerging South African framework for environmental labelling could benefit from the lessons...

  3. Radioactive environmental impact assessment for a production project of titanium dioxide by chlorination process

    International Nuclear Information System (INIS)

    Qiu Guohua

    2010-01-01

    Based on the analysis of shifting direction of radionuclide in production process and the environmental investigation and monitoring, the radioactive environmental impact from a production project of titanium dioxide by chlorination process has been analyzed and assessed. The result of radioactive environmental investigation shows that values of assessment factors are in the range of environmental radioactive background. The radioactive environmental sensitive spot has been delineated. The results of radioactive environmental prediction show that the additional doses to workers and residents are 0.59 mSv/a and 9.28 × 10-4 mSv/a respectively which are less than the annual dose limits of administration. The radioactive environmental impact of the production project of the titanium dioxide by chlorination process will meet the needs of national regulations and standards if radiation protection and environmental protection measures are implemented and radioactive environmental monitoring are strengthened. (author)

  4. Environmentally friendly disinfectant: Production, disinfectant action and efficiency

    Directory of Open Access Journals (Sweden)

    Čekerevac Milan I.

    2006-01-01

    Full Text Available Silver is a known disinfectant from ancient times, and it has been widely used for various purposes: for food and water disinfection, curing of wounds and as a universal antibiotic for a wide spectrum of diseases - until the Second World War and the discovery of penicillin. Until recently, it was assumed that silver, being a heavy metal, was toxic for humans and living beings. However, the newest research provides facts that the usage of silver, even for drinking water disinfection, is benign if it is added in small concentrations (in parts per billion. It has been shown in the newer scientific and technical literature that silver in colloidal form is a powerful (secondary disinfectant for drinking water, that it can be effectively used for the disinfection of water containers including swimming pools, installations in food industry, medicine, etc. Particularly, it has been shown that colloidal silver combined with hydrogen peroxide shows synergism having strong bactericidal and antiviral effects. The combination can be successfully used as a disinfectant in agriculture, food production and medicine. The original electrochemical process of production, the mechanism of physical-chemical reactions in that process and the mechanism of the antiseptic affect of the environmentally friendly disinfectant, based on the synergism of colloidal silver and hydrogen peroxide and the activity of electrochemically activated water, is shown. The starting solution was anolyte, obtained in electrochemical activation by water electrolysis of a highly diluted solution of K-tartarate in demineralized water (5.5-1CT4 M. The problem of electrolysis of very dilute aqueous solutions in membrane cells was particularly treated. It was shown that the efficiency of the electrolysis depends on the competition between the two processes: the rates of the processes of hydrogen and oxygen generation at the electrodes and the process of diffusion of hydrogen and hydroxyl ions

  5. Progress towards Sustainable Production: Environmental, Economic, and Social Assessments of the Cellulose Nanofiber Production Process

    Directory of Open Access Journals (Sweden)

    Dami Moon

    2017-12-01

    Full Text Available We assessed the environmental, economic, and social impacts of the process for producing cellulose nanofibers (CNFs, which are considered to be a valuable sustainable woody biomass feedstock. The greenhouse gas (GHG emissions associated with CNF production are greater than the emissions associated with producing most plastic materials used in vehicle components because the grinding process during CNF production generates significant GHG emissions. The cost of CNF production is also higher than the cost of producing comparable plastics for automotive use because of the high cost of the pulverization process. The sensitivity analysis in this study suggested that GHG emissions and manufacturing costs could be reduced by 19.1–76.4% and 3.6–12.2%, respectively, by improving the energy efficiency of CNF production by two to five times. We compared the potential social risks associated with CNF production between Japan and Vietnam using a product social impact life cycle assessment database. It is desirable to reduce the social risk on the fair salary and child labor, and to improve the safe and healthy living conditions in the local communities that import wood chips harvested in Vietnam.

  6. The green entrepreneur's challenge : The influence of environmental ambition in new product development

    NARCIS (Netherlands)

    Berchicci, L.

    2005-01-01

    Studies dealing with environmental issues in New Product Development have made significant progress explaining how firms can develop greener new products that succeed in the market and Environmental New Product Development (ENPD) has become a wide-spread practice within an increasing number of

  7. Illustrating Environmental Issues by Using the Production-Possibility Frontier: A Classroom Experiment

    Science.gov (United States)

    Carson, Nancy; Tsigaris, Panagiotis

    2011-01-01

    The authors develop a new classroom experimental game to illustrate environmental issues by using the production-possibility frontier in an introductory economics course. Waste evolves as a byproduct of the production of widgets. Environmental cleanup is produced by reallocating scarce resources away from the production of the dirty good. In…

  8. Is cumulative fossil energy demand a useful indicator for the environmental performance of products?

    NARCIS (Netherlands)

    Huijbregts, Mark A J; Rombouts, Linda J A; Hellweg, Stefanie; Frischknecht, Rolf; Hendriks, A Jan; Meent, Dik van de; Ragas, Ad M J; Reijnders, Lucas; Struijs, Jaap

    2006-01-01

    The appropriateness of the fossil Cumulative Energy Demand (CED) as an indicator for the environmental performance of products and processes is explored with a regression analysis between the environmental life-cycle impacts and fossil CEDs of 1218 products, divided into the product categories

  9. Environmental and Social Management System Implementation Handbook : Animal Production

    OpenAIRE

    International Finance Corporation

    2014-01-01

    Environmental and social responsibility is becoming more and more important in todayapos;s global economy. There are thousands of environmental and social codes and standards in the world today. The codes and standards define the rules and the objectives. But the challenge is in the implementation. An environmental and social management system (ESMS) helps companies to integrate the ru...

  10. Stochastic, goal-oriented rapid impact modeling of uncertainty and environmental impacts in poorly-sampled sites using ex-situ priors

    Science.gov (United States)

    Li, Xiaojun; Li, Yandong; Chang, Ching-Fu; Tan, Benjamin; Chen, Ziyang; Sege, Jon; Wang, Changhong; Rubin, Yoram

    2018-01-01

    Modeling of uncertainty associated with subsurface dynamics has long been a major research topic. Its significance is widely recognized for real-life applications. Despite the huge effort invested in the area, major obstacles still remain on the way from theory and applications. Particularly problematic here is the confusion between modeling uncertainty and modeling spatial variability, which translates into a (mis)conception, in fact an inconsistency, in that it suggests that modeling of uncertainty and modeling of spatial variability are equivalent, and as such, requiring a lot of data. This paper investigates this challenge against the backdrop of a 7 km, deep underground tunnel in China, where environmental impacts are of major concern. We approach the data challenge by pursuing a new concept for Rapid Impact Modeling (RIM), which bypasses altogether the need to estimate posterior distributions of model parameters, focusing instead on detailed stochastic modeling of impacts, conditional to all information available, including prior, ex-situ information and in-situ measurements as well. A foundational element of RIM is the construction of informative priors for target parameters using ex-situ data, relying on ensembles of well-documented sites, pre-screened for geological and hydrological similarity to the target site. The ensembles are built around two sets of similarity criteria: a physically-based set of criteria and an additional set covering epistemic criteria. In another variation to common Bayesian practice, we update the priors to obtain conditional distributions of the target (environmental impact) dependent variables and not the hydrological variables. This recognizes that goal-oriented site characterization is in many cases more useful in applications compared to parameter-oriented characterization.

  11. Environmental assessment of energy production from waste and biomass

    Energy Technology Data Exchange (ETDEWEB)

    Tonini, D.

    2013-02-15

    To evaluate the environmental and energy performance of bioenergy and waste-to-energy systems life cycle assessment was used in this thesis. This was supported by other tools such as material, substance, energy flow analysis and energy system analysis. The primary objective of this research was to provide a consistent framework for the environmental assessment of innovative bioenergy and waste-to-energy systems including the integration of LCA with other tools (mentioned earlier). The focus was on the following aspects: - Evaluation of potential future energy scenarios for Denmark. This was done by integrating the results of energy system analysis into life cycle assessment scenarios. - Identification of the criticalities of bioenergy systems, particularly in relation to land use changes. - Identification of potentials and criticalities associated with innovative waste refinery technologies. This was done by assessing a specific pilot-plant operated in Copenhagen, Denmark. The waste refining treatment was compared with a number of different state-of-the-art technologies such as incineration, mechanical-biological treatment and landfilling in bioreactor. The results highlighted that production of liquid and solid biofuels from energy crops should be limited when inducing indirect land use changes (iLUC). Solid biofuels for use in combined heat and power plants may perform better than liquid biofuels due to higher energy conversion efficiencies. The iLUC impacts stood out as the most important contributor to the induced GHG emissions within bioenergy systems. Although quantification of these impacts is associated with high uncertainty, an increasing number of studies are documenting the significance of the iLUC impacts in the bioenergy life cycle. With respect to municipal solid waste, state of the art incineration, MBT and waste refining (with associated energy and material recovery processes) may all provide important and comparable GHG emission savings. The waste

  12. Biogas energy production in Ghana: environmental pollution analysis

    International Nuclear Information System (INIS)

    Akpabli, C.K.; Gyasi, S.

    1997-01-01

    Analysis of biomass fuel conversion options for biogas production at Appolonia in Ghana has demonstrated that the technique is promising not only for solving some of the country's energy and agricultural problems, but as a very useful way of waste treatment which should help improve waste management. Some environmental analyses were made and some of the preliminary results obtained are presented and discussed. There has been considerable decrease in both biochemical oxygen demand and biological oxygen demand of the effluents compared with the corresponding values obtained for the influents of the three most readily available biomass sources used - human faeces, cow dung and pig dung. Apart from methane (about 54%) and carbon dioxide (about 40%) the biogas produced at Appolonia , according to investigations, using a gas filter analyser and gas chromatography, was found to contain from 1 to 2% hydrogen sulphide which is poisonous. Two other components were detected in the gas but not identified in this present work. (author). 2 figs., 5 tabs., 8 refs

  13. The Environmental Quality – Requirements for the Pro-active Approach of Production Enterprises

    Directory of Open Access Journals (Sweden)

    Beáta Stehlíková

    2005-11-01

    Full Text Available The interrelationship and cooperation of the Quality Management System, the Environmental Management System QMS, and Environmental Management System EMS in production enterprises has a very important impact to their performance. The synergic effect of two systems {QMS + EMS} created the so called POEMS Product and the Process Oriented Environmental Management System functioning for the benefit of the Company Profit, Customer Satisfaction, Product Competition, Environment and the Social Responsibility.

  14. Elements in a new sustainable industrial culture - Environmental assessment in product development

    DEFF Research Database (Denmark)

    Alting, Leo; Hauschild, Michael Zwicky; Wenzel, Henrik

    1997-01-01

    In the last few years the environmental focus in the manufacturing industry has shifted from the manufacturing processes to the products themselves, as these are accountable for the environmental impacts in all life cycle phases. The paper describes for 3 industrial cases how a newly developed LCA...... methodology can assist the product developer in development of more environmentally friendly products. Finally, common experience gained will be discussed....

  15. The Effects of Coal Switching and Improvements in Electricity Production Efficiency and Consumption on CO2 Mitigation Goals in China

    Directory of Open Access Journals (Sweden)

    Li Li

    2015-07-01

    Full Text Available Although the average CO2 emission for a person in China is only about 1/4 that of a person in the US, the government of China still made a commitment to ensure that CO2 emissions will reach their peak in 2030 because of the ever-increasing pressure of global warming. In this work, we examined the effects of coal switching, efficiency improvements in thermal power generation and the electricity consumption of economic activities on realizing this goal. An improved STIRPAT model was developed to create the scenarios. In order to make the estimated elasticities more consistent with different variables selected to construct the formulation, a double-layer STIRPAT model was constructed, and by integrating the two equations obtained by regressing the series in each layer, we finally got the equation to describe the long-run relationship among CO2 emissions (Ic, the share of coal in overall energy consumption (FMC, coal intensity of thermal power generation (CIp and electricity intensity of GDP (EIelec. The long term elasticities represented by the equation show that the growth of CO2 emissions in China is quite sensitive to FMC, CIp and EIelec. After that, five scenarios were developed in order to examine the effects of China’s possible different CO2 emission reduction policies, focusing on improving FMC, CIp and EIelec respectively. Through a rigorous analysis, we found that in order to realize the committed CO2 emissions mitigating goal, China should obviously accelerate the pace in switching from coal to low carbon fuels, coupled with a consistent improvement in electricity efficiency of economic activities and a slightly slower improvement in the coal efficiency of thermal power generation.

  16. Does environmental friendliness equal healthiness? Swiss consumers' perception of protein products.

    Science.gov (United States)

    Lazzarini, Gianna A; Zimmermann, Jasmin; Visschers, Vivianne H M; Siegrist, Michael

    2016-10-01

    Food production and consumption have major impacts on the environment. At the same time, changes in human diets worldwide are increasingly leading to health problems. Both issues are highly influenced by consumers' everyday food choices and could be addressed by reducing consumption of meat and other animal products. To promote sustainable food consumption, we need to know how consumers perceive the environmental friendliness and healthiness of food products, on which criteria they base their evaluations of environmental friendliness and healthiness, and how their estimations relate to life cycle assessments and nutrient profiling. We presented 30 protein products, which varied in provenance, production methods, and processing, to 85 participants from Switzerland. They were asked to sort the products once according to their perceived environmental friendliness and once according to their perceived healthiness. The mean distances between the products were compared to the products' life cycle assessments and nutrient profiles. The results showed that perceived environmental friendliness and healthiness are highly correlated. The main predictors of the products' perceived environmental friendliness were product category, presence of an organic label, and provenance; and for perceived healthiness, these predictors were product category, fat content, processing, and presence of an organic label. Environmental friendliness and healthiness estimations were significantly correlated to the life cycle assessments and the nutrient profiles of the products, respectively. Hence, to promote healthy and environmentally friendly food choices, motivators related to environmental friendliness and healthiness could be used in synergy. Awareness about meat's environmental impact should be increased and better information is needed for consumers to make an accurate environmental impact and healthiness assessments of protein products. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. An integrated framework for sustainable development goals

    Directory of Open Access Journals (Sweden)

    David Griggs

    2014-12-01

    Full Text Available The United Nations (UN Rio+20 summit committed nations to develop a set of universal sustainable development goals (SDGs to build on the millennium development goals (MDGs set to expire in 2015. Research now indicates that humanity's impact on Earth's life support system is so great that further global environmental change risks undermining long-term prosperity and poverty eradication goals. Socioeconomic development and global sustainability are often posed as being in conflict because of trade-offs between a growing world population, as well as higher standards of living, and managing the effects of production and consumption on the global environment. We have established a framework for an evidence-based architecture for new goals and targets. Building on six SDGs, which integrate development and environmental considerations, we developed a comprehensive framework of goals and associated targets, which demonstrate that it is possible, and necessary, to develop integrated targets relating to food, energy, water, and ecosystem services goals; thus providing a neutral evidence-based approach to support SDG target discussions. Global analyses, using an integrated global target equation, are close to providing indicators for these targets. Alongside development-only targets and environment-only targets, these integrated targets would ensure that synergies are maximized and trade-offs are managed in the implementation of SDGs.

  18. An integrated approach for a dynamic energy and environmental system analysis of biogas production pathways

    NARCIS (Netherlands)

    Pierie, Frank; Liu, Wen; Moll, Henri C.

    2014-01-01

    Abstract written to Biogas Science for oral presentation. Regarding a new methodology for determining the energy efficiency, carbon footprint and environmental impact of anaerobic biogas production pathways. Additionally, results are given regarding the impacts of energy crops and waste products

  19. Comparing environmental impacts from insects for feed and food as an alternative to animal production

    DEFF Research Database (Denmark)

    Halloran, Afton Marina Szasz; Hansen, Hanne Helene; Jensen, Lars Stoumann

    2018-01-01

    This chapter systematically compares and contrasts the known environmental impacts of traditional vertebrate animal production with insect production intended for both food and animal feed. There are major physiological and biological differences between traditional livestock species and insects,...

  20. Environmental benefits of advanced oil and gas exploration and production technology

    Energy Technology Data Exchange (ETDEWEB)

    None

    1999-10-01

    THROUGHOUT THE OIL AND GAS LIFE CYCLE, THE INDUSTRY HAS APPLIED AN ARRAY OF ADVANCED TECHNOLOGIES TO IMPROVE EFFICIENCY, PRODUCTIVITY, AND ENVIRONMENTAL PERFORMANCE. THIS REPORT FOCUSES SPECIFICALLY ON ADVANCES IN EXPLORATION AND PRODUCTION (E&P) OPERATIONS.

  1. Achieving a production goal of 1 million B/D of coal liquids by 1990. [Impediments and constraints

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Charles; LaRosa, Dr., P. J.; Coles, E. T.; Fein, H. L.; Petros, J. J.; Iyer, R. S.; Merritt, R. T.

    1980-03-01

    Under this contract, Bechtel analyzed the resource requirements and reviewed major obstacles to the daily production of several million barrels of synthetic coal liquids. Further, the study sought to identify the industry infrastructure needed to support the commercial readiness of the coal liquefaction process. A selected list of critical resource items and their domestic/international availability was developed and examined, and the impact of their supply on the various synthetic coal liquids programs was evaluated. The study approach was to develop representative, or generic, direct and indirect coal liquefaction conceptual designs from available technology and costs data. The generic processes were to employ technology that would be considered commercial by the mid- or late-1980s. The size of the generic construction mobilization was considered reasonable at the outset of the program. The product slate was directed toward unrefined liquid fuels rather than diesel oil or gasoline. The generic processes were to use a wide range of coals to permit siting in most coal-producing regions across the country. Because of the dearth of conceptual design data in the literature, Bechtel developed generic plant designs by using in-house design expertise. Bechtel assumed that because it is first generation technology, the indirect process will be used at the outset of the liquids program, and the direct process will be introduced two to four years later as a second generation technology. The products of either of these processes will be limited to boiler fuels and/or other liquid products which require further upgrading. Cost estimates were developed from equipment lists, as well as material and labor estimates, which enabled the determination of an order-of-magnitude cost estimate and target plant construction schedule for both processes.

  2. Decomposition of Productivity Considering Multi-environmental Pollutants in Chinese Industrial Sector

    OpenAIRE

    Fujii, Hidemichi; Cao, Jing; Managi, Shunsuke

    2015-01-01

    The objective of this study is to calculate and decompose productivity incorporating multi-environmental pollutants in Chinese industrial sectors from 1992 to 2008. We apply a weighted Russell directional distance model to calculate productivity from both the economic and environmental performance. The main findings are: (1) Chinese industrial sectors increased productivity, with the main contributing factors being labor saving prior to 2000; (2) The main contributing factors for productivity...

  3. Exploration and production operations in an environmentally sensitive area

    International Nuclear Information System (INIS)

    Barker, G.W.; Steele, E.J.; Robalino, J.; Baldwin, S.J.

    1994-01-01

    The Ecuadorian portion of the Amazon Basin, known locally as the Oriente, is the major oil producing region in Ecuador. The tropical rain forests of the Oriente contain some of the Earth's most biologically diverse and ecologically sensitive areas. In addition, the rain forest is home to several groups of indigenous peoples.When formulating an exploration plan and prior to beginning E and P activities in the Oriente, operators must understand the environmental and sociocultural issues in the region. These concerns are considered throughout the planning process, from project conception to project closure. An environmental management plan is adopted which addresses environmental and sociocultural concerns, minimizes environmental impact, prevents delays, and limits environmental liability

  4. Bridging environmental and financial cost of dairy production: A case study of Irish agricultural policy.

    Science.gov (United States)

    Chen, Wenhao; Holden, Nicholas M

    2018-02-15

    The Irish agricultural policy 'Food Harvest 2020' is a roadmap for sectoral expansion and Irish dairy farming is expected to intensify, which could influence the environmental and economic performance of Irish milk production. Evaluating the total environmental impacts and the real cost of Irish milk production is a key step towards understanding the possibility of sustainable production. This paper addresses two main issues: aggregation of environmental impacts of Irish milk production by monetization, to understand the real cost of Irish milk production, including the environmental costs; and the effect of the agricultural policy 'Food Harvest 2020' on total cost (combining financial cost and environmental cost) of Irish milk production. This study used 2013 Irish dairy farming as a baseline, and defined 'bottom', 'target' and 'optimum' scenarios, according to the change of elementary inputs required to meet agricultural policy ambitions. The study demonstrated that the three monetization methods, Stepwise 2006, Eco-cost 2012 and EPS 2000, could be used for aggregating different environmental impacts into monetary unit, and to provide an insight for evaluating policy related to total environmental performance. The results showed that the total environmental cost of Irish milk production could be greater than the financial cost (up to €0.53/kg energy corrected milk). The dairy expansion policy with improved herbage utilization and fertilizer application could reduce financial cost and minimize the total environmental cost of per unit milk produced. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Integrating environmental impact assessment into new product development and processing-technology selection

    NARCIS (Netherlands)

    Depping, Verena; Grunow, Martin; Middelaar, van Corina; Dumpler, Joseph

    2017-01-01

    Environmental-impact reduction potential is great early in new product development. To exploit this potential, this study evaluates novel combinations of existent processing technologies. Process engineering is combined with an environmental product assessment along the supply chain. In the dairy

  6. Application of Environmental Input-Output Analysis for Corporate and Product Environmental Footprints—Learnings from Three Cases

    DEFF Research Database (Denmark)

    Kjær, Louise Laumann; Høst-Madsen, Niels Karim Høst-Madsen; Schmidt, Jannick H.

    2015-01-01

    An increasing number of companies are expanding their environmental impact reduction targets and strategies to include their supply chains or whole product life cycles. In this paper, we demonstrate and evaluate an approach, where we used a hybrid Environmental Input-Output (EIO) database...... as a basis for corporate and product environmental footprint accounts, including the entire supply chain. We present three cases, where this approach was applied. Case study 1 describes the creation of total corporate carbon footprint accounts for three Danish regional healthcare organisations. In case study...... a foundation for decision-making within reasonable time and cost, and for companies with a large upstream environmental footprint, the analysis supports advancing their sustainability agenda to include supply chain impacts. However, there are implications when going from screening to implementing the results...

  7. Assessing environmental consequences of using co-products in animal feed

    NARCIS (Netherlands)

    Zanten, van H.H.E.; Mollenhorst, H.; Vries, de J.W.; Middelaar, van C.E.; Kernebeek, van H.R.J.; Boer, de I.J.M.

    2014-01-01

    The livestock sector has a major impact on the environment. This environmental impact may be reduced by feeding agricultural co-products (e.g. beet tails) to livestock, as this transforms inedible products for humans into edible products, e.g. pork or beef. Nevertheless, co-products have different

  8. The role of Latin America's land and water resources for global food security: environmental trade-offs of future food production pathways.

    Science.gov (United States)

    Flachsbarth, Insa; Willaarts, Bárbara; Xie, Hua; Pitois, Gauthier; Mueller, Nathaniel D; Ringler, Claudia; Garrido, Alberto

    2015-01-01

    One of humanity's major challenges of the 21st century will be meeting future food demands on an increasingly resource constrained-planet. Global food production will have to rise by 70 percent between 2000 and 2050 to meet effective demand which poses major challenges to food production systems. Doing so without compromising environmental integrity is an even greater challenge. This study looks at the interdependencies between land and water resources, agricultural production and environmental outcomes in Latin America and the Caribbean (LAC), an area of growing importance in international agricultural markets. Special emphasis is given to the role of LAC's agriculture for (a) global food security and (b) environmental sustainability. We use the International Model for Policy Analysis of Agricultural Commodities and Trade (IMPACT)-a global dynamic partial equilibrium model of the agricultural sector-to run different future production scenarios, and agricultural trade regimes out to 2050, and assess changes in related environmental indicators. Results indicate that further trade liberalization is crucial for improving food security globally, but that it would also lead to more environmental pressures in some regions across Latin America. Contrasting land expansion versus more intensified agriculture shows that productivity improvements are generally superior to agricultural land expansion, from an economic and environmental point of view. Finally, our analysis shows that there are trade-offs between environmental and food security goals for all agricultural development paths.

  9. The Role of Latin America’s Land and Water Resources for Global Food Security: Environmental Trade-Offs of Future Food Production Pathways

    Science.gov (United States)

    Flachsbarth, Insa; Willaarts, Bárbara; Xie, Hua; Pitois, Gauthier; Mueller, Nathaniel D.; Ringler, Claudia; Garrido, Alberto

    2015-01-01

    One of humanity’s major challenges of the 21st century will be meeting future food demands on an increasingly resource constrained-planet. Global food production will have to rise by 70 percent between 2000 and 2050 to meet effective demand which poses major challenges to food production systems. Doing so without compromising environmental integrity is an even greater challenge. This study looks at the interdependencies between land and water resources, agricultural production and environmental outcomes in Latin America and the Caribbean (LAC), an area of growing importance in international agricultural markets. Special emphasis is given to the role of LAC’s agriculture for (a) global food security and (b) environmental sustainability. We use the International Model for Policy Analysis of Agricultural Commodities and Trade (IMPACT)—a global dynamic partial equilibrium model of the agricultural sector—to run different future production scenarios, and agricultural trade regimes out to 2050, and assess changes in related environmental indicators. Results indicate that further trade liberalization is crucial for improving food security globally, but that it would also lead to more environmental pressures in some regions across Latin America. Contrasting land expansion versus more intensified agriculture shows that productivity improvements are generally superior to agricultural land expansion, from an economic and environmental point of view. Finally, our analysis shows that there are trade-offs between environmental and food security goals for all agricultural development paths. PMID:25617621

  10. Not in Your Backyard? Selective Tariff Cuts for Environmentally Preferable Products

    OpenAIRE

    Estelle, Gozlan; Ramos, Maria Priscila

    2007-01-01

    Current negotiations at the WTO’s Committee on Trade and Environment have made it conceivable that WTO members agree on selective tariff cuts for certain Environmentally Preferable Products, in an attempt to combine gains from trade and from cleaner production/consumption. This raises questions on the environmental and welfare implications of trade policy when a close substitute (“environmentally worse") exists. Using a simple partial equilibrium model with two substitutable goods ('green' an...

  11. Assessment of Environmental Stresses for Enhanced Microalgal Biofuel Production – An Overview

    International Nuclear Information System (INIS)

    Cheng, Dan; He, Qingfang

    2014-01-01

    Microalgal biofuels are currently considered to be the most promising alternative to future renewable energy source. Microalgae have great potential to produce various biofuels, including biodiesel, bioethanol, biomethane, and biohydrogen. Cultivation of biofuel-producing microalgae demands favorable environmental conditions, such as suitable light, temperature, nutrients, salinity, and pH. However, these conditions are not always compatible with the conditions beneficial to biofuel production, because biofuel-related compounds (such as lipids and carbohydrates) tend to accumulate under environmental-stress conditions of light, temperature, nutrient, and salt. This paper presents a brief overview of the effects of environmental conditions on production of microalgal biomass and biofuel, with specific emphasis on how to utilize environmental stresses to improve biofuel productivity. The potential avenues of reaping the benefits of enhanced biofuel production by environmental stresses while maintaining high yields of biomass production have been discussed.

  12. Assessment of environmental stresses for enhanced microalgal biofuel production-an overview

    Directory of Open Access Journals (Sweden)

    Dan eCheng

    2014-07-01

    Full Text Available Microalgal biofuels are currently considered to be the most promising alternative to future renewable energy source. Microalgae have great potential to produce various biofuels, including biodiesel, bioethanol, biomethane, and biohydrogen. Cultivation of biofuel-producing microalgae demands favorable environmental conditions, such as suitable light, temperature, nutrients, salinity, and pH. However, these conditions are not always compatible with the conditions beneficial to biofuel production, because biofuel-related compounds (such as lipids and carbohydrates tend to accumulate under environmental-stress conditions of light, temperature, nutrient, and salt. This paper presents a brief overview of the effects of environmental conditions on production of microalgal biomass and biofuel, with specific emphasis on how to utilize environmental stresses to improve biofuel productivity. The potential avenues of reaping the benefits of enhanced biofuel production by environmental stresses while maintaining high yields of biomass production have been discussed.

  13. Assessment of Environmental Stresses for Enhanced Microalgal Biofuel Production – An Overview

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Dan, E-mail: dxcheng@ualr.edu; He, Qingfang, E-mail: dxcheng@ualr.edu [Department of Applied Science, University of Arkansas at Little Rock, Little Rock, AR (United States)

    2014-07-07

    Microalgal biofuels are currently considered to be the most promising alternative to future renewable energy source. Microalgae have great potential to produce various biofuels, including biodiesel, bioethanol, biomethane, and biohydrogen. Cultivation of biofuel-producing microalgae demands favorable environmental conditions, such as suitable light, temperature, nutrients, salinity, and pH. However, these conditions are not always compatible with the conditions beneficial to biofuel production, because biofuel-related compounds (such as lipids and carbohydrates) tend to accumulate under environmental-stress conditions of light, temperature, nutrient, and salt. This paper presents a brief overview of the effects of environmental conditions on production of microalgal biomass and biofuel, with specific emphasis on how to utilize environmental stresses to improve biofuel productivity. The potential avenues of reaping the benefits of enhanced biofuel production by environmental stresses while maintaining high yields of biomass production have been discussed.

  14. Study on environmental impact assessment index system of uranium production base construction plan

    International Nuclear Information System (INIS)

    Liu Xiaochao; Song Liquan

    2008-01-01

    The index system on planning environmental impact assessment of uranium mining base construction is discussed by using the hiberarchy method according to characteristics of uranium production and environmental protection object of planning assessment. The suggested index system is in favor of persistent exploitation of uranium resource and environmental protection in the uranium mining area, and can provide a reference for planning environmental impact assessment of uranium mining base construction in China. (authors)

  15. Environmental-performance research priorities: Wood products. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-15

    This report describes a research plan to establish environmental, energy, and economic performance measures for renewable building materials, and to identify management and technology alternatives to improve environmental performance in a cost-effective manner. The research plan is designed to: (1) collect environmental and economic data on all life-cycle stages of the materials, (2) ensure that the data follows consistent definitions and collection procedures, and (3) develop analytical procedures for life-cycle analysis to address environmental performance questions. The research will be subdivided into a number of individual project modules. The five processing stages of wood used to organize the research plan are: (1) resource management and harvesting; (2) processing; (3) design and construction of structures; (4) use, maintenance, and disposal; and (5) waste recycling. Individual research module descriptions are provided in the report, as well as assessment techniques, research standards and protocol, and research management. 13 refs., 5 figs., 3 tabs.

  16. Securitization product design for China's environmental pollution liability insurance.

    Science.gov (United States)

    Pu, Chengyi; Addai, Bismark; Pan, Xiaojun; Bo, Pangtuo

    2017-02-01

    The environmental catastrophic accidents in China over the last three decades have triggered implementation of myriad policies by the government to help abate environmental pollution in the country. Consequently, research into environmental pollution liability insurance and how that can stimulate economic growth and the development of financial market in China is worthwhile. This study attempts to design a financial derivative for China's environmental pollution liability insurance to offer strong financial support for significant compensation towards potential catastrophic environmental loss exposures, especially losses from the chemical industry. Assuming the risk-free interest rate is 4%, the market portfolio expected return is 12%; the financial asset beta coefficient is 0.5, by using the capital asset pricing model (CAPM) and cash flow analysis; the principal risk bond yields 9.4%, single-period and two-period prices are 103.85 and 111.58, respectively; the principal partial-risk bond yields 10.09%, single-period and two-period prices are 103.85 and 111.58, respectively; and the principal risk-free bond yields 8.94%, single-period and two-period prices are 107.99 and 115.83, respectively. This loss exposure transfer framework transfers the catastrophic risks of environmental pollution from the traditional insurance and reinsurance markets to the capital market. This strengthens the underwriting capacity of environmental pollution liability insurance companies, mitigates the compensation risks of insurers and reinsurers, and provides a new channel to transfer the risks of environmental pollution.

  17. Advance Planning, Programming and Production Control as key Activities Now the Environmental Education

    Directory of Open Access Journals (Sweden)

    Geraldo Cardoso de Oliveira Neto

    2015-06-01

    Full Text Available This work addresses the evolution of Planning, Programming and Control of Production (PPCP as essential activities of the company towards the insertion of environmental education. The approach is based on an exploratory research and a critical bibliographic revision. Two main objectives were established: i a new way of production organization, by considering cleaner production from company utilities to production capacity, technology and outsourcing and ii infrastructure changes related to market attendance and environmental education dissemination. Needs that arise can be grouped as follows: utilities adequacy, cleaner technologies and ecochains implementation; instruction and dissemination of environmental education; and necessity of the adoption of new paradigms.

  18. Environmental assessment of farm-scaled anaerobic co-digestion for bioenergy production

    International Nuclear Information System (INIS)

    Lijó, Lucía; González-García, Sara; Bacenetti, Jacopo; Negri, Marco; Fiala, Marco; Feijoo, Gumersindo; Moreira, María Teresa

    2015-01-01

    Highlights: • Anaerobic monodigestion and codigestion were compared. • The environmental advantages of suitable waste management were proved. • The use of cereal crops as feedstock improves biogas yield. • Cultivation step implies the most important environmental hotspot. • Digestate management options were evaluated. - Abstract: The aim of this study was to assess the environmental profile of a bioenergy system based on a co-digestion plant using maize silage and pig slurry as substrates. All the processes involved in the production of bioenergy as well as the avoided processes accrued from the biogas production system were evaluated. The results evidenced the environmental importance of the cultivation step and the environmental credits associated to the avoided processes. In addition, this plant was compared with two different plants that digest both substrates separately. The results revealed the environmental benefits of the utilisation of pig slurry due to the absence of environmental burdens associated with its production as well as credits provided when avoiding its conventional management. The results also presented the environmental drawbacks of the utilisation of maize silage due to the environmental burdens related with its production. Accordingly, the anaerobic mono-digestion of maize silage achieved the worst results. The co-digestion of both substrates was ranked in an intermediate position. Additionally, three possible digestate management options were assessed. The results showed the beneficial effect of digestate application as an organic fertiliser, principally on account of environmental credits due to avoided mineral fertilisation. However, digestate application involves important acidifying and eutrophicating emissions

  19. Environmental assessment of farm-scaled anaerobic co-digestion for bioenergy production

    Energy Technology Data Exchange (ETDEWEB)

    Lijó, Lucía, E-mail: lucia.lijo@usc.es [Department of Chemical Engineering, Institute of Technology, University of Santiago de Compostela, 15782 Santiago de Compostela (Spain); González-García, Sara [Department of Chemical Engineering, Institute of Technology, University of Santiago de Compostela, 15782 Santiago de Compostela (Spain); Bacenetti, Jacopo; Negri, Marco; Fiala, Marco [Department of Agricultural and Environmental Sciences, Production, Landscape, Agroenergy, University of Milan, Milan (Italy); Feijoo, Gumersindo; Moreira, María Teresa [Department of Chemical Engineering, Institute of Technology, University of Santiago de Compostela, 15782 Santiago de Compostela (Spain)

    2015-07-15

    Highlights: • Anaerobic monodigestion and codigestion were compared. • The environmental advantages of suitable waste management were proved. • The use of cereal crops as feedstock improves biogas yield. • Cultivation step implies the most important environmental hotspot. • Digestate management options were evaluated. - Abstract: The aim of this study was to assess the environmental profile of a bioenergy system based on a co-digestion plant using maize silage and pig slurry as substrates. All the processes involved in the production of bioenergy as well as the avoided processes accrued from the biogas production system were evaluated. The results evidenced the environmental importance of the cultivation step and the environmental credits associated to the avoided processes. In addition, this plant was compared with two different plants that digest both substrates separately. The results revealed the environmental benefits of the utilisation of pig slurry due to the absence of environmental burdens associated with its production as well as credits provided when avoiding its conventional management. The results also presented the environmental drawbacks of the utilisation of maize silage due to the environmental burdens related with its production. Accordingly, the anaerobic mono-digestion of maize silage achieved the worst results. The co-digestion of both substrates was ranked in an intermediate position. Additionally, three possible digestate management options were assessed. The results showed the beneficial effect of digestate application as an organic fertiliser, principally on account of environmental credits due to avoided mineral fertilisation. However, digestate application involves important acidifying and eutrophicating emissions.

  20. Environmental assessment of energy production from waste and biomass

    DEFF Research Database (Denmark)

    Tonini, Davide

    . To evaluate the environmental and energy performance of bioenergy and wasteto-energy systems life cycle assessment was used in this thesis. This was supported by other tools such as material, substance, energy flow analysis and energy system analysis. The primary objective of this research was to provide...... a consistent framework for the environmental assessment of innovative bioenergy and waste-to-energy systems including the integration of LCA with other tools (mentioned earlier). The focus was on the following aspects: - Evaluation of potential future energy scenarios for Denmark. This was doneby integrating...... assessing the environmental performance of the waste refinery, a detailed knowledge of the waste composition is recommendable as this determines the energy outputs and thereby the assessment results. The benefits offered by the waste refinery compared with incinerators and MBT plants are primarily related...

  1. Model for Environmental Assessment of Industrial Production Systems: A Case Study in a Plastic Manufacturing Firm

    Directory of Open Access Journals (Sweden)

    Francine Comunello

    2017-05-01

    Full Text Available The environmental issue has been discussed sharply in the organizational environment, as consumers, and society in general, have been increasingly concerned about the environment. In this sense, the companies, especially the factories, seek to minimize the environmental impact caused by its production processes through actions that combine the organization's economic interests with environmental concerns. Thus, this article aims to analyze how environmental management of the productive sector is being carried out at Industria Beta Chapecó/SC. Therefore, we developed a qualitative and descriptive research in order to apply the Model for Environmental Assessment of Industrial Production Systems (MAASPI in the production of Industria Beta sector. The results showed the main environmental interventions caused by the production process of the organization, particularly the interventions for the consumption of electricity, plant location and chip storage. As main proposals to minimize negative environmental impacts, we have the installation of translucent tiles in the production environment, a study on energy efficiency, construction of water and soil testing, construction of waste storage terminals and implementation of the pre-selection of the raw material. The realization of the suggested adjustments enables Industria Beta to foresee the legal environmental requirements, to aim for enviromental certifications and seals and to strengthen its image as environment-friendly with collaborators and society in general.

  2. Sustainability, environmental, and safety aspects in the production of biocomposites

    DEFF Research Database (Denmark)

    Markert, Frank

    Future product design requires sustainbale processes and may with great benefit prtially be based on composites made from agricultural by-products. the EU project Biocomp addressed the manufacturing and the parallel assessment of the world wide sustainability of such an approach as well as the en......Future product design requires sustainbale processes and may with great benefit prtially be based on composites made from agricultural by-products. the EU project Biocomp addressed the manufacturing and the parallel assessment of the world wide sustainability of such an approach as well...

  3. Application of Environmental Input-Output Analysis for Corporate and Product Environmental Footprints—Learnings from Three Cases

    Directory of Open Access Journals (Sweden)

    Louise Laumann Kjaer

    2015-08-01

    Full Text Available An increasing number of companies are expanding their environmental impact reduction targets and strategies to include their supply chains or whole product life cycles. In this paper, we demonstrate and evaluate an approach, where we used a hybrid Environmental Input-Output (EIO database as a basis for corporate and product environmental footprint accounts, including the entire supply chain. We present three cases, where this approach was applied. Case study 1 describes the creation of total corporate carbon footprint accounts for three Danish regional healthcare organisations. In case study 2, the approach was used as basis for an Environmental Profit and Loss account for the healthcare company, Novo Nordisk A/S. Case study 3 used the approach for life cycle assessment of a tanker ship. We conclude that EIO-based analyses offer a holistic view of environmental performance, provide a foundation for decision-making within reasonable time and cost, and for companies with a large upstream environmental footprint, the analysis supports advancing their sustainability agenda to include supply chain impacts. However, there are implications when going from screening to implementing the results, including how to measure and monitor the effect of the different actions. Thus, future research should include more detailed models to support decision-making.

  4. Product waste in the automotive industry : Technology and environmental management

    NARCIS (Netherlands)

    Groenewegen, Peter; Hond, Frank Den

    1993-01-01

    In this article the changes in technology and industry structure forced by waste management in the automotive industry are explored. The analysis is based on (1) a characterisation of corporate response to environmental issues, and (2) the management of technology applied to the car manufacturing

  5. Environmental Externalities Related to Power Production Technologies in Denmark

    DEFF Research Database (Denmark)

    Ibsen, Liselotte Schleisner; Nielsen, Per Sieverts

    1997-01-01

    of the Danish part of the project is to implement the framework for externality evaluation, for three different power plants located in Denmark. The paper will focus on the assessment of the impacts of the whole fuel cycles for wind, natural gas and biogas. Priority areas for environmental impact assessment...

  6. Environmental conditions and primary production in a Sahelian ...

    African Journals Online (AJOL)

    Environmental descriptors (nutrient, water transparency, temperature ... Nutrient concentrations were low, with high variability (from 0 to 30 µg.l-1 for DIN and from 0 to 18 µg.l-1 for. PO4). The primary ... and permanent interventions of sea water.

  7. Coherence in product-oriented policies and environmental management systems in the car industry

    DEFF Research Database (Denmark)

    Smink, Carla Kornelia; Nielsen, Eskild Holm

    more traditional process-oriented policies and are a challenge for companies. The article presents some of the authors  investigations on how the car industry has dealt with both process-oriented and product-oriented policies. [1] EPR refers to extending producer responsibility for products beyond......Over the last decade, product-oriented policies as Extended Producer Responsibility (EPR) and Integrated Product Policy (IPP) are more and more recognised as a target for both corporate environmental strategy and government environmental policy. These product-oriented policies are distinct from...

  8. environmental system analysis of tomato production in ghana ...

    African Journals Online (AJOL)

    Prof. Adipala Ekwamu

    eutrophying compounds associated with tomato production in Ghana and identify options to reduce the environmen- tal impacts. Life Cycle .... Equation (1). Activities in production that contributed to the emissions were fertiliser application and fuel usage. Table 1 shows activity data for calculation of emission originating from ...

  9. Estimating Preferences for Wood Products with Environmental Attributes

    Directory of Open Access Journals (Sweden)

    Masaji Sakagami

    2018-01-01

    Full Text Available Tropical deforestation and forest degradation are serious problems for the global environment; as a result, sustainable forest management and forest certification have become important. In this study, using a choice experiment, we investigated, on the demand side, consumers’ preferences and willingness to pay (WTP for certified wood products that attempt to address public concerns regarding deforestation and forest degradation. Specifically, we investigated how estimates of consumers’ preferences and WTP were influenced by product attributes such as quality, certification, and price. To the authors’ knowledge, few studies of this kind have been conducted, particularly in Japan. The study’s main finding was that Japanese consumers were willing to pay a premium for certified wood products with attributes related to sustainable forest management; most preferred were products with attributes related to preserving biodiversity. These findings indicate that consumers are willing to pay a premium for products that contribute to solving the problems of deforestation and forest degradation.

  10. Environmental assessment for the Consumer Products Efficiency Standards program

    Energy Technology Data Exchange (ETDEWEB)

    1980-05-23

    The Energy Policy and Conservation Act of 1975 as amended by the National Energy Conservation Policy Act of 1978, requires the DOE to prescribe energy efficiency standards for thirteen consumer products. The Consumer Products Efficiency Standards (CPES) program covers the following products: refrigerators and refrigerator-freezers; freezers;clothes dryers;water heaters; room air conditioners; home heating equipment (not including furnaces); kitchen ranges and ovens; central air conditioners (cooling and heat pumps); furnaces; dishwashers; television sets; clothes washers; and humidifiers and dehumidifiers. DOE is proposing two sets of standards for all thirteen consumer products: intermediate standards to become effective in 1981 for the first nine products and in 1982 for the second four products, and final standards to become effective in 1986 and 1987, respectively. The final standards are more restrictive than the intermediate standards and will provide manufacturers with the maximum time permitted under the Act to plan and develop extensive new lines of efficient consumer products. The final standards proposed by DOE require the maximum improvements in efficiency which are technologically feasible and economically justified, as required by Section 325(c) of EPCA. The thirteen consumer products account for approximately 90% of all the energy consumed in the nation's residences, or more than 20% of the nation's energy needs. Increases in the energy efficiency of these consumer products can help to narrow the gap between the nation's increasing demand for energy and decreasing supplies of domestic oil and natural gas. Improvements in the efficiency of consumer products can thus help to solve the nation's energy crisis.

  11. Green marketing - How to put an environmental spin on your energy product, service, program or project

    International Nuclear Information System (INIS)

    Flynn, J.

    1992-01-01

    This paper examines how some smart marketers have quickly picked up on the new consumer interest in protecting the environment, turned it into increased sales and profits and at the same time effectively increased energy conservation. They asked their product developers to improve the environmental benefits of their existing products and to design some new ones. Then they asked their advertising writers to put an environmental spin on their product advertising. Next they made frequent visits to the bank with the increased sales revenues from an expanding market share and at the same time are doing something worthwhile in energy and environmental conservation

  12. Economic factor environmental protection. Productivity of the German environmental and climate protection industry in international competition; Wirtschaftsfaktor Umweltschutz. Leistungsfaehigkeit der deutschen Umwelt- und Klimaschutzwirtschaft im internationalen Vergleich

    Energy Technology Data Exchange (ETDEWEB)

    Legler, Harald; Krawczyk, Olaf [Niedersaechsisches Institut fuer Wirtschaftsforschung (NIW), Hannover (Germany); Walz, Rainer; Eichhammer, Wolfgang; Frietsch, Rainer [Fraunhofer Institut fuer System- und Innovationsforschung (ISI), Karlsruhe (Germany)

    2006-05-15

    The analysis on the economic factor environment and the German environmental industry on international competition is faced to methodological limits, since the environmental industry does not present itself as an homogeneous sector. The study is organized in the following chapters: introduction - the importance of environmental industry; classification of environmental and climate protection industry; productivity volume and production structure; international competition for potential environmental protection products; environmental protection industry and innovative performance. Integrated environmental solutions are of increasing significance, avoiding emissions and products and production process from beginning on. All known forecast indicate an expansive market development. In addition the rising prices for crude oil may push the search for innovative solutions to substitute fossil energy sources. The environmental industry should look for globally transferable solutions in order to promote global sustainable growth.

  13. 48 CFR 552.238-72 - Identification of Products That Have Environmental Attributes.

    Science.gov (United States)

    2010-10-01

    ... buyers to purchase products that are less harmful to the environment, when they are life cycle cost... highlight environmental products under Federal Supply Service schedule contracts in various communications..., and low volatile organic compounds (VOCs). Post-consumer material means a material or finished product...

  14. Tracing distant environmental impacts of agricultural products from a consumer perspective

    NARCIS (Netherlands)

    Kastner, Thomas; Kastner, Michael; Nonhebel, Sanderine

    2011-01-01

    Globally, trade flows of agricultural products are increasing. While value is typically added along the whole production chain, certain environmental impacts, such as land and water use, biomass appropriation, and soil degradation, are intrinsically linked to where the primary products originate

  15. Life cycle energy efficiency and environmental impact assessment of bioethanol production from sweet potato based on different production modes

    Science.gov (United States)

    Zhang, Jun; Jia, Chunrong; Wu, Yi; Xi, Beidou; Wang, Lijun; Zhai, Youlong

    2017-01-01

    The bioethanol is playing an increasingly important role in renewable energy in China. Based on the theory of circular economy, integration of different resources by polygeneration is one of the solutions to improve energy efficiency and to reduce environmental impact. In this study, three modes of bioethanol production were selected to evaluate the life cycle energy efficiency and environmental impact of sweet potato-based bioethanol. The results showed that, the net energy ratio was greater than 1 and the value of net energy gain was positive in the three production modes, in which the maximum value appeared in the circular economy mode (CEM). The environment emission mainly occurred to bioethanol conversion unit in the conventional production mode (CPM) and the cogeneration mode (CGM), and eutrophication potential (EP) and global warming potential (GWP) were the most significant environmental impact category. While compared with CPM and CGM, the environmental impact of CEM significantly declined due to increasing recycling, and plant cultivation unit mainly contributed to EP and GWP. And the comprehensive evaluation score of environmental impact decreased by 73.46% and 23.36%. This study showed that CEM was effective in improving energy efficiency, especially in reducing the environmental impact, and it provides a new method for bioethanol production. PMID:28672044

  16. Industry Efficiency and Total Factor Productivity Growth under Resources and Environmental Constraint in China

    Science.gov (United States)

    Tao, Feng; Li, Ling; Xia, X. H.

    2012-01-01

    The growth of China's industry has been seriously depending on energy and environment. This paper attempts to apply the directional distance function and the Luenberger productivity index to measure the environmental efficiency, environmental total factor productivity, and its components at the level of subindustry in China over the period from 1999 to 2009 while considering energy consumption and emission of pollutants. This paper also empirically examines the determinants of efficiency and productivity change. The major findings are as follows. Firstly, the main sources of environmental inefficiency of China's industry are the inefficiency of gross industrial output value, the excessive energy consumption, and pollutant emissions. Secondly, the highest growth rate of environmental total factor productivity among the three industrial categories is manufacturing, followed by mining, and production and supply of electricity, gas, and water. Thirdly, foreign direct investment, capital-labor ratio, ownership structure, energy consumption structure, and environmental regulation have varying degrees of effects on the environmental efficiency and environmental total factor productivity. PMID:23365517

  17. Industry Efficiency and Total Factor Productivity Growth under Resources and Environmental Constraint in China

    Directory of Open Access Journals (Sweden)

    Feng Tao

    2012-01-01

    Full Text Available The growth of China's industry has been seriously depending on energy and environment. This paper attempts to apply the directional distance function and the Luenberger productivity index to measure the environmental efficiency, environmental total factor productivity, and its components at the level of subindustry in China over the period from 1999 to 2009 while considering energy consumption and emission of pollutants. This paper also empirically examines the determinants of efficiency and productivity change. The major findings are as follows. Firstly, the main sources of environmental inefficiency of China's industry are the inefficiency of gross industrial output value, the excessive energy consumption, and pollutant emissions. Secondly, the highest growth rate of environmental total factor productivity among the three industrial categories is manufacturing, followed by mining, and production and supply of electricity, gas, and water. Thirdly, foreign direct investment, capital-labor ratio, ownership structure, energy consumption structure, and environmental regulation have varying degrees of effects on the environmental efficiency and environmental total factor productivity.

  18. The environmental impact of nitrogen in field vegetable production

    NARCIS (Netherlands)

    Neeteson, J.J.; Carton, O.T.

    2001-01-01

    Many intensive systems of field vegetable production are not sustainable because they lose excessive amounts of nitrogen (N) to the environment. Processes in the N cycle of agricultural systems include assimilation, mineralization/immobilization, nitrification, denitrification, ammonia

  19. Environmental assessment of different strategies for production of stabilized yeast

    OpenAIRE

    Monclus, Vincent; Pénicaud, Caroline; Perret, Bruno; Fonseca, Fernanda

    2016-01-01

    Yeast are widely used for producing fermented (bread, beer...) and health benefit (probiotics) products. The production of stable and active yeast involves fermentation, concentration, protection, drying (stabilization) and storage. During the stabilization and storage steps, the cells face numerous stress which may deteriorate functional properties and cause cell death. Different strategies can be used to preserve cell survival, such as changing growth medium for fermentation or adapting pro...

  20. Study of environmental concerns: offshore oil and gas drilling and production

    Energy Technology Data Exchange (ETDEWEB)

    Baker, R

    1978-01-01

    Material on the environmental concerns associated with offshore drilling and production activities has been synthesized with Department of Fisheries and Environment files on specific projects, these being the primary information source. Recommendations to resolve these concerns have also been provided. Most of the environmental concerns identified in this study are traceable to specific weaknesses in offshore drilling and production procedures and management systems. Hardware weaknesses are seldom of central importance. Areas of concern include the gradual deposition of pollutants from rigs, underwater pipelines and onshore ancillary structures, and the quality of the following: action plans to deal with oil spills, standards for safety and anti-pollution equipment, information provided on the environmental hazards in offshore drilling and production areas, environmental impact assessments, and communication links between those having environmental concerns and expertise (including the public-at-large) and those who make the decisions regarding offshore oil and gas development.

  1. Danish experience with the EDIP tool for environmental design of industrial products

    DEFF Research Database (Denmark)

    Wenzel, Henrik; Alting, Leo

    1999-01-01

    Since its publication in, 1996, the Danish method and tools for the environmental design of industrial products (EDIP) have been used in companies in Denmark and abroad, and experience has been gained with a variety of product categories such as electronics, electromechanical products, furniture......, foodstuffs, packaging, textiles, building equipment, energy systems and railway systems. The experience shows that large environmental improvement potentials can be found in all product categories. As a broad average, 30-50% environmental improvement of products have been implemented over few years...... by companies working with the EDIP tools. The paper presents examples from pumps, refrigerator, high pressure cleaners audio/video products, book shelves and moulded cardboards. A questionnaire investigation of the experience with life cycle assessment (LCA) and ecodesign within the Danish pioneer companies...

  2. Increasing the production efficiency and reducing the environmental impacts of hydraulic fracturing

    Science.gov (United States)

    Viswanathan, H. S.

    2016-12-01

    Shale gas is an unconventional fossil energy resource profoundly impacting US energy independence and is projected to last for at least 100 years. Production of methane and other hydrocarbons from low permeability shale involves hydraulic fracturing of rock, establishing fracture connectivity, and multiphase fluid-flow and reaction processes all of which are poorly understood. The result is inefficient extraction with many environmental concerns. A science-based capability is required to quantify the governing mesoscale fluid-solid interactions, including microstructural control of fracture patterns and the interaction of engineered fluids with hydrocarbon flow. These interactions depend on coupled thermo-hydro-mechanical-chemical (THMC) processes over scales from microns to tens of meters. Determining the key mechanisms in subsurface THMC systems has been impeded due to the lack of sophisticated experimental methods to measure fracture aperture and connectivity, multiphase permeability, and chemical exchange capacities at the high temperature, pressure, and stresses present in the subsurface. In this study, we developed and prototyped the microfluidic and triaxial core flood experiments required to reveal the fundamental dynamics of fracture-fluid interactions. The goal is transformation of hydraulic fracturing from present ad hoc approaches to science-based strategies while safely enhancing production. Specifically, we have demonstrated an integrated experimental/modeling approach that allows for a comprehensive characterization of fluid-solid interactions and develop models that can be used to determine the reservoir operating conditions necessary to gain a degree of control over fracture generation, fluid flow, and interfacial processes over a range of subsurface conditions.

  3. Maintaining environmental quality while expanding biomass production: Sub-regional U.S. policy simulations

    International Nuclear Information System (INIS)

    Egbendewe-Mondzozo, Aklesso; Swinton, Scott M.; Izaurralde, R. César; Manowitz, David H.; Zhang, Xuesong

    2013-01-01

    This paper evaluates environmental policy effects on ligno-cellulosic biomass production and environmental outcomes using an integrated bioeconomic optimization model. The environmental policy integrated climate (EPIC) model is used to simulate crop yields and environmental indicators in current and future potential bioenergy cropping systems based on weather, topographic and soil data. The crop yield and environmental outcome parameters from EPIC are combined with biomass transport costs and economic parameters in a representative farmer profit-maximizing mathematical optimization model. The model is used to predict the impact of alternative policies on biomass production and environmental outcomes. We find that without environmental policy, rising biomass prices initially trigger production of annual crop residues, resulting in increased greenhouse gas emissions, soil erosion, and nutrient losses to surface and ground water. At higher biomass prices, perennial bioenergy crops replace annual crop residues as biomass sources, resulting in lower environmental impacts. Simulations of three environmental policies namely a carbon price, a no-till area subsidy, and a fertilizer tax reveal that only the carbon price policy systematically mitigates environmental impacts. The fertilizer tax is ineffectual and too costly to farmers. The no-till subsidy is effective only at low biomass prices and is too costly to government. - Highlights: ► Bioeconomic optimization model predicts how biomass production affects environment. ► Rising biomass production could impair climate and water quality. ► Environmental protection policies compared as biomass supply grows. ► Carbon price protects the environment cost-effectively as biomass supply expands

  4. Prediction of Hydrolysis Products of Organic Chemicals under Environmental pH Conditions

    Science.gov (United States)

    Cheminformatics-based software tools can predict the molecular structure of transformation products using a library of transformation reaction schemes. This paper presents the development of such a library for abiotic hydrolysis of organic chemicals under environmentally relevant...

  5. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - BAGHOUSE FILTRATION PRODUCTS - TETRATEC PTFE TECHNOLOGIES TETRATEX 8005

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) pilot of the Environmental Technology Verification (ETV) Program. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of th...

  6. NUCAPS: NOAA Unique Combined Atmospheric Processing System Environmental Data Record (EDR) Products

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset consists of numerous retrieved estimates of hydrological variables and trace gases as Environmental Data Record (EDR) products from the NOAA Unique...

  7. New prospects in EU environmental policies. The Integrated Product Policy (IPP)

    International Nuclear Information System (INIS)

    Carnimeo, G.; Iraldo, F.

    2000-01-01

    The Integrated Product Policy - IPP - is becoming one of the top priorities for the European Commission within the framework of the product-oriented environmental policies. Rather than a new policy, this is an innovative approach aimed at co-originated existing and forthcoming environmental policies, in order to manage in an integrated way and minimise the impacts connected with the whole product life-cycle. The underlying life-cycle guideline requires the management of each phase by considering what happens in all the other phases. What clearly emerges from a research carried out by Iefe Bocconi is, on the one hand, the effectiveness of co-operation and networking between all the actors involved in the product environmental management within the different phases of its life cycle (policy makers, producers, retailers, consumers, NGOs, etc.) and, on the other, the opportunity of developing an integrated management of both environmental policy instruments and corporate management tools [it

  8. Environmental labelling of buildings and construction products: lessons for South Africa from global trends

    CSIR Research Space (South Africa)

    Ampofo-Anti, NL

    2012-07-01

    Full Text Available be informed by life cycle considerations. Environmental labelling in construction takes the form of whole building rating systems and construction product certification programmes. The First Generation building rating systems have to date experienced much...

  9. Introduction to environmental engineering

    Science.gov (United States)

    Šalić, Anita; Zelić, Bruno

    2018-02-01

    Nowadays we can easily say that environmental engineering is truly an interdisciplinary science. Combining biology, ecology, geology, geography, mathematics, chemistry, agronomy, medicine, economy, etc. environmental engineering strives to use environmental understanding and advancements in technology to serve mankind by decreasing production of environmental hazards and the effects of those hazards already present in the soil, water, and air. Major activities of environmental engineer involve water supply, waste water and solid management, air and noise pollution control, environmental sustainability, environmental impact assessment, climate changes, etc. And all this with only one main goal - to prevent or reduce undesirable impacts of human activities on the environment. To ensure we all have tomorrow.

  10. LIFE CYCLE DESIGN GUIDANCE MANUAL - ENVIRONMENTAL REQUIREMENTS AND THE PRODUCT SYSTEM

    Science.gov (United States)

    The U.S Environmental Protection Agency's (EPA) Risk Reduction Engineering Laboratory and the University of Michigan are cooperating in a project to reduce environmental impacts and health risks through product system design. The resulting framework for life cycle design is pr...

  11. To what extent are DFX principles really used when developing environmentally sensitive products?

    DEFF Research Database (Denmark)

    McAloone, Timothy Charles

    1998-01-01

    Research shows that over the past five years, industry has improved its understanding of the need to consider the environmental impacts of its products As a result companies are now beginning to incorporate environmental decisions into their design processes. It has been observed that companies f...

  12. Environmental aspects and renewable energy sources in the production of construction aggregate

    Science.gov (United States)

    Skrzypczak, Izabela; Kokoszka, Wanda; Buda-Ożóg, Lidia; Kogut, Janusz; Słowik, Marta

    2017-11-01

    The main activity of open pit mining of aggregates are aggregates' exploitation of natural mineral deposits and its modification in order to obtain high-quality aggregates. The development of aggregate production is conditioned by a number of factors. The most important are: documented material resources, mining and manufacturing capabilities, the need of environmental protection (environmental aspects), the subordination of the plan of spatial development, formal and legal issues, as well as economic and financial aspects. While identifying and assessing the environmental impacts of manufacturing aggregates one may distinguish those environmental aspects that have or may have the greatest magnitude of the impact on the environment as a result of industrial activities. Manufacturers producing aggregates located in the areas covered by the special environmental protection require extra diligence in the conduct of mining activities for preservation of natural resources. The article discusses some main environmental aspects of the production of construction aggregates on the example of one of the largest producers of this material in Subcarpathian province of Poland. Environmental protection in production of aggregates may refer to four aspects: the use of natural resources, having excluded land from agriculture and forestry, land reclamation after exploitation, and use of energy from renewable energy sources. The economic and environmental impact of production volume of aggregates is evaluated by the index information capacity method and the method of graphs.

  13. Environmental assessment tools for the evaluation and improvement of European livestock production systems

    NARCIS (Netherlands)

    Halberg, N.; Werf, H.M.G.; Basset-Mens, C.; Dalgaard, P.; Boer, de I.J.M.

    2005-01-01

    Different types of assessment tools have been developed in Europe with the purpose of determining the environmental impact of various livestock production systems at farm level. The assessment tools differ in terms of which environmental objectives are included and how indicators are constructed and

  14. Environmental perspectives on using cast seaweed for biogas production

    DEFF Research Database (Denmark)

    Fredenslund, Anders Michael; Møller, Henrik Bjarne; Christensen, Thomas Budde

    Solrød Municipality, Denmark is working towards building a biogas plant utilizing locally available organic wastes including cast seaweed, which is collected each year, since the local inhabitants see this material as a nuisance. A preliminary study suggested favorable conditions for contstructing...... a mixed substrate biogas plant. Continuously fed reactor experiments showed that the intended mix of substrate including cast seaweed could be used as raw material for a biogas plant in thermophilic operation. The environmental analysis suggests existence of several positive benefits of utilizing cast...

  15. The Development Of Cleaner Production Practices Between Environmental

    DEFF Research Database (Denmark)

    Wangel, Arne; Mohamed, Maketab; Agamuthu, P.

    2003-01-01

    (DANCED), Ministry of Environment and Energy. Small and medium-scale enterprises (SMEs) were targeted within three sectors: Textile, food and electroplating industries. The paper illustrates the change process from the perspective of electroplating SMEs by reviewing the cleaner production options chosen......, presenting figures on the results achieved, and discussing the experiences gained. Reviewing the approach and results of the Centre, as well as the status of cleaner production (CP) in Malaysia, the paper outlines the challenges for national policy making, when moving from promotion by project intervention...... towards sustainable practices in the SME sector at large. The paper draws upon data collection conducted by the research project ‘A Study on Promotion and Implementation of Cleaner Production Practices in Malaysian Industry - Development of a National Program and Action Plan for Promotion of Cleaner...

  16. Good news to use from the environmental front: coal combustion products as an environmental success story

    Energy Technology Data Exchange (ETDEWEB)

    Ward, J.N. [ISG Resources, Inc., Salt Lake City, UT (United States)

    2002-07-01

    ISG Resources in the USA's largest manager and marketer of coal combustion products, involved also in developing new technologies and applications for treatment and use of fly ash, bottom ash, boiler slag and FGD by-products. The paper, outlined in a series of 14 overheads, describes the USA's successes and initiatives so far in coal combustion products utilization. Further opportunities for the coal industry were discussed. The industry is encouraged to become involved now in carbon trading mechanisms for fly ash utilization displacing cement production.

  17. UTILIZATION OF BY-PRODUCT OF CHEESEMAKING AGRIBUSINESS INDUSTRY FOR DEVELOPMENT OF FOOD PRODUCTS AND REDUCTION OF THE ENVIRONMENTAL IMPACT

    Directory of Open Access Journals (Sweden)

    Ana Lúcia Becker Rohlfes

    2014-05-01

    Full Text Available The uses of by-products of cheese industry is still not significant in Brazil, since about 15% of liquid whey is used as raw material in food industry technology. The liquid whey has excellent technological properties, making it an alternative to minimize environmental impacts, besides it enables the use of the same nutritional properties in the production of new food products or adding value to the existing ones. The present study aimed to use liquid whey as an ingredient in the formulation of ice cream, hard candies, ham and breads, as well as to evaluate the influence of it in technological characteristics of the products and to quantify the volume of whey used. In order to evaluate the use of liquid whey, the products were developed with partial or total replacement of milk or water by whey, being the substitution accompanied by the determination of centesimal composition, as well as evaluating the visual characteristics of each product. The results show that the preparation of the products under study with substitution of raw milk or water is viable, proving that using liquid whey is a technological possibility of using a by-product considered to be an environmental pollutant. It was concluded that the use of liquid whey in the food industry reduces the environmental impact, since there is a reduction in the volume of whey discharged into the environment.

  18. Physical foundation of the labor theory of value: production and environmental destruction

    International Nuclear Information System (INIS)

    Obinata, T.

    2005-01-01

    A concept negentropy is introduced to supplement Marx's labor theory of value. The negentropy, that is a less entropy state than the thermal equilibrium state of matter, is a common property of the usefulness of material needs. The production of commodity increases the negentropy of product, but the action raises more environmental entropy than the negentropy of the product. This is environmental damage. In addition the negentropy plays a role of the substance of value and answers the issue about productive and unproductive labor. It is clarified that the origin of surplus value is the negentropy of information

  19. assessment of environmental impacts in comfortable furniture production process using life cycle assessment (LCA technique

    Directory of Open Access Journals (Sweden)

    hejhar abbasi

    2016-12-01

    Full Text Available Furniture industry releases annually a large amount of volatile organic compound to the environment due to the use of adhesives, textiles, paints and coating materials. There are some different methods to measure the load of pollutions and the environmental impacts. Life cycle assessment (LCA is one of the best techniques. LCA is a technique in which all environmental impacts related to a product assessed all over its life cycle, from cradle to grave, and ultimately can be used to improve the production process and to prevent unsuitable environmental impacts. In summary, it can be concluded that the use of this technique is the basis for sustainable development and improving social, economic, and environmental indices. This study focused on the collecting of a comprehensive life cycle inventory data for comfortable furniture in two different production processes (B1 and B2 located in Tehran province, and analyzed the environmental impacts during the production process as gate to gate investigation. The results revealed that emissions in production process B1 were higher than that of production process B2. The reason for this is that basic operations such as sawing and frame assembling along with final operation have been done in the same unit for case B1. Textile production and usage, and polyurethane foam were identified as the main hotspots, respectively. Moreover, the results showed that comfortable furniture production process has the highest effects on ecosystem quality, human health, and resources (fossil fuels and mines, respectively.

  20. Environmental assessment of two different crop systems in terms of biomethane potential production

    International Nuclear Information System (INIS)

    Bacenetti, Jacopo; Fusi, Alessandra; Negri, Marco; Guidetti, Riccardo; Fiala, Marco

    2014-01-01

    The interest in renewable energy sources has gained great importance in Europe due to the need to reduce fossil energy consumption and greenhouse gas emissions, as required by the Renewable Energy Directive (RED) of the European Parliament. The production of energy from energy crops appears to be consistent with RED. The environmental impact related to this kind of energy primarily originates from crop cultivation. This research aimed to evaluate the environmental impact of different crop systems for biomass production: single and double crop. The environmental performances of maize and maize plus wheat were assessed from a life cycle perspective. Two alternative scenarios considering different yields, crop management, and climatic conditions, were also addressed. One normal cubic metre of potential methane was chosen as a functional unit. Methane potential production data were obtained through lab experimental tests. For both of the crop systems, the factors that have the greatest influence on the overall environmental burden are: fertilizer emissions, diesel fuel emissions, diesel fuel production, and pesticide production. Notwithstanding the greater level of methane potential production, the double crop system appears to have the worse environmental performance with respect to its single crop counterpart. This result is due to the bigger quantity of inputs needed for the double crop system. Therefore, the greater amount of biomass (silage) obtained through the double crop system is less than proportional to the environmental burden that results from the bigger quantity of inputs requested for double crop. - Highlights: • Environmental impact of two crop systems was evaluated • Biomethane specific production tests were carried out • Alternative scenarios (different yields and crop management) were assessed • Maize single crop obtains the better environmental performance • Critical factors are: fertilizer and diesel fuel emissions and diesel fuel

  1. Environmental assessment of two different crop systems in terms of biomethane potential production

    Energy Technology Data Exchange (ETDEWEB)

    Bacenetti, Jacopo; Fusi, Alessandra, E-mail: alessandra.fusi@unimi.it; Negri, Marco; Guidetti, Riccardo; Fiala, Marco

    2014-01-01

    The interest in renewable energy sources has gained great importance in Europe due to the need to reduce fossil energy consumption and greenhouse gas emissions, as required by the Renewable Energy Directive (RED) of the European Parliament. The production of energy from energy crops appears to be consistent with RED. The environmental impact related to this kind of energy primarily originates from crop cultivation. This research aimed to evaluate the environmental impact of different crop systems for biomass production: single and double crop. The environmental performances of maize and maize plus wheat were assessed from a life cycle perspective. Two alternative scenarios considering different yields, crop management, and climatic conditions, were also addressed. One normal cubic metre of potential methane was chosen as a functional unit. Methane potential production data were obtained through lab experimental tests. For both of the crop systems, the factors that have the greatest influence on the overall environmental burden are: fertilizer emissions, diesel fuel emissions, diesel fuel production, and pesticide production. Notwithstanding the greater level of methane potential production, the double crop system appears to have the worse environmental performance with respect to its single crop counterpart. This result is due to the bigger quantity of inputs needed for the double crop system. Therefore, the greater amount of biomass (silage) obtained through the double crop system is less than proportional to the environmental burden that results from the bigger quantity of inputs requested for double crop. - Highlights: • Environmental impact of two crop systems was evaluated • Biomethane specific production tests were carried out • Alternative scenarios (different yields and crop management) were assessed • Maize single crop obtains the better environmental performance • Critical factors are: fertilizer and diesel fuel emissions and diesel fuel

  2. Agro-environmental evaluation of vineyard management using organic farming and integrated plant production systems

    OpenAIRE

    FORGET, D.; LACOMBE, J.; DURAND, A.

    2009-01-01

    Organic farming is often considered to be the most environmentally-friendly crop management system, even if integrated production also aims at decreasing the impact of agriculture on the natural environment. In order to establish references for the agro-environmental evaluation of these two production systems in relation to grape growing, INRA carried out an initial study from 2001 to 2004 at the plot scale. This study focused on two grape varieties (Merlot N and Cabernet Sauvignon) in its Co...

  3. Simplified LCA and matrix methods in identifying the environmental aspects of a product system.

    Science.gov (United States)

    Hur, Tak; Lee, Jiyong; Ryu, Jiyeon; Kwon, Eunsun

    2005-05-01

    In order to effectively integrate environmental attributes into the product design and development processes, it is crucial to identify the significant environmental aspects related to a product system within a relatively short period of time. In this study, the usefulness of life cycle assessment (LCA) and a matrix method as tools for identifying the key environmental issues of a product system were examined. For this, a simplified LCA (SLCA) method that can be applied to Electrical and Electronic Equipment (EEE) was developed to efficiently identify their significant environmental aspects for eco-design, since a full scale LCA study is usually very detailed, expensive and time-consuming. The environmentally responsible product assessment (ERPA) method, which is one of the matrix methods, was also analyzed. Then, the usefulness of each method in eco-design processes was evaluated and compared using the case studies of the cellular phone and vacuum cleaner systems. It was found that the SLCA and the ERPA methods provided different information but they complemented each other to some extent. The SLCA method generated more information on the inherent environmental characteristics of a product system so that it might be useful for new design/eco-innovation when developing a completely new product or method where environmental considerations play a major role from the beginning. On the other hand, the ERPA method gave more information on the potential for improving a product so that it could be effectively used in eco-redesign which intends to alleviate environmental impacts of an existing product or process.

  4. Transition to Organic Tea Production in the Thai Nguyen Province, Vietnam: Economic and Environmental Impacts

    OpenAIRE

    Nghia Dai Tran

    2009-01-01

    This study from Vietnam shows that a switch from conventional to organic tea productions would bring real environmental, health and economic benefits for the country's farmers and its society as a whole. In particular, the amount of agrochemical residue and waste produced by tea production would be reduced. Farmers would also be able to enjoy a better livelihood as they could command a premium price for their organic tea products. The study therefore recommends that organic tea production is ...

  5. Genetic and environmental parameters for ewe productivity in Merinos

    African Journals Online (AJOL)

    Data of 3272 lambing records collected on 818 ewes born from 689 dams and sired by 371 rams were used in the evaluation of ewe lifetime productivity (total number born, number weaned and total weight weaned). These records were collected from ewes born from 1969 to 1994 and which gave birth during the period ...

  6. Environmental and metabolomic study of antibiotic production by actinomycetes

    NARCIS (Netherlands)

    Zhu, Hua

    2014-01-01

    This thesis may be regarded as a concept work, to see how feasible drug discovery approaches still are. For this, a strain collection was built up consisting of actinomycetes from soil in the Qinling and Himalaya mountains, which were subsequently tested for antibiotic production against multi-drug

  7. A Pro-Environmental Reasoned Action Model for Measuring Citizens’ Intentions regarding Ecolabel Product Usage

    Directory of Open Access Journals (Sweden)

    Reny Nadlifatin

    2016-11-01

    Full Text Available Ecolabel products are one approach towards environmental sustainability. Ecolabel programs have been socialized by governments all over the world to reduce environmental harm caused by the daily life cycles of the products that citizens use. The present study was aimed at measuring citizens’ behavior intention (BI regarding ecolabel product usage. An extended theory of reasoned action (TRA, namely that of pro-environmental reasoned action (PERA, is used as the predictor model. A total of 213 questionnaire data, collected from citizens of Indonesia, was analyzed using structural equation modeling. The analysis results show that the PERA model is able to describe 68% of citizens’ BI regarding ecolabel product usage. The analysis results also reveal that attitude is a key determinant factor. Several practical suggestions based on the results can be used as input for policy makers and company management to consider in their efforts to increase citizens’ BI to use ecolabel products.

  8. Environmental Product Development Combining the Life Cycle Perspective with Chemical Hazard Information

    DEFF Research Database (Denmark)

    Askham, Cecilia

    in the design or redesign process. This thesis concerns marrying the life cycle perspective with chemical hazard information, in order to advance the practice of environmental product development, and hence takes further steps towards sustainable development. The need to consider the full value chain...... for the life cycle of products meant that systems theory and systems engineering principles were important in this work. Life cycle assessment methodology was important for assessing environmental impacts for case products. The new European regulation for chemicals (REACH) provided the main driver......Concerns regarding the short- and long-term detrimental effects of chemicals on human health and ecosystems have made the minimisation of chemical hazards a vitally important issue. If sustainable development is to be achieved, environmental efficient products (and product life cycles...

  9. International recommendations for managing environmental risk from nuclear energy production

    International Nuclear Information System (INIS)

    Clarke, R.H.

    1996-01-01

    The establishment of any recommendations relating to the control of radiation exposure requires decisions on the management of the associated risk. Those decisions must reflect attitudes towards the acceptable levels of risk for both workers and the public. The environmental impact of nuclear energy principally concerns radiation doses and risks to members of the public. The author shows how the considerations of risk and acceptability are used internationally to set standards for protection. The results differ as between limiting doses for normal operations, for restricting the likelihood of accidents, intervening after an accident, or reducing doses from a chronic exposure situation. It is concluded that there is a coherent pattern in the resulting protection system

  10. Environmental fate and effects of nicotine released during cigarette production.

    Science.gov (United States)

    Seckar, Joel A; Stavanja, Mari S; Harp, Paul R; Yi, Yongsheng; Garner, Charles D; Doi, Jon

    2008-07-01

    A variety of test methods were used to study the gradation, bioaccumulation, and toxicity of nicotine. Studies included determination of the octanol-water partition coefficient, conversion to CO2 in soil and activated sludge, and evaluation of the effects on microbiological and algal inhibition as well as plant germination and root elongation. The partitioning of nicotine between octanol and water indicated that nicotine will not bioaccumulate regardless of the pH of the medium. The aqueous and soil-based biodegradation studies indicated that nicotine is readily biodegradable in both types of media. The microbiological inhibition and aquatic and terrestrial toxicity tests indicated that nicotine has low toxicity. The U.S. Environmental Protection Agency Persistence, Bioaccumulation, and Toxicity Profiler model, based on the structure of nicotine and the predictive rates of hydroxyl radical and ozone reactions, estimated an atmospheric half-life of less than 5.0 h. Using this value in the Canadian Environmental Modeling Center level III model, the half-life of nicotine was estimated as 3.0 d in water and 0.5 d in soil. This model also estimated nicotine discharge into the environment; nicotine would be expected to be found predominantly in water (93%), followed by soil (4%), air (3%), and sediment (0.4%). Using the estimated nicotine concentrations in water, soil, and sediment and the proper median effective concentrations derived from the algal growth, biomass inhibition, and buttercrunch lettuce (Lactuca sativa) seed germination and root elongation studies, hazard quotients of between 10(-7) and 10(-8) were calculated, providing further support for the conclusion that the potential for nicotine toxicity to aquatic and terrestrial species in the environment is extremely low.

  11. Suppression of bremsstrahlung and pair production due to environmental factors

    International Nuclear Information System (INIS)

    Klein, Spencer

    1999-01-01

    The environment in which bremsstrahlung and pair creation occurs can strongly affect cross sections for these processes. Because ultrarelativistic electromagnetic interactions involve very small longitudinal momentum transfers, the reactions occur gradually, spread over long distances. During this time, even relatively weak factors can accumulate enough to disrupt the interaction. In the Landau-Pomeranchuk-Migdal effect, multiple scattering reduces the bremsstrahlung and pair production cross section. This review will discuss this and a variety of other factors that can suppress bremsstrahlung and pair production, as well as related effects involving beamstrahlung and QCD processes. After surveying different theoretical approaches, experimental measurements will be covered. Recent accurate measurements by the SLAC E-146 Collaboration will be highlighted, along with several recent theoretical works relating to the experiment. (c) 1999 The American Physical Society

  12. Behavior of arsenic in hydrometallurgical zinc production and environmental impact

    Directory of Open Access Journals (Sweden)

    Peltekov A.B.

    2014-12-01

    Full Text Available The presence of arsenic in zinc sulphide concentrates is particularly harmful, because it creates problems in zinc electrolysis. The main source of arsenic in non-ferrous metallurgy is arsenopyrite (FeAsS. In oxidative roasting of zinc concentrates, FeAsS oxidizes to arsenic oxides (As2O3, As2O5. In this connection a natural FeAsS was examined, and also the distribution of arsenic in the products of the roasting process, the cycle of sulphuric acid obtaining and the leaching of zinc calcine were studied. The arsenic contamination of soils in the vicinity of nonferrous metals smelter KCM SA, Plovdiv, Bulgaria as a result of zinc and lead productions has been studied.

  13. Seibt: Environmental engineering. 4th edition, 1995. Buyer's guide for environmental engineering. Products, suppliers, services

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    The book lists more than 8,900 enterprises in German-speaking countries and informs the reader about their products and services. A product index with more than 7,000 entries facilitates access to the desired information. For each product, suppliers and producers are liested in the main part of the buyer's guide with their complete address, telephone number, and fax number. In addition, there is an alphabetic list of suppliers and a section on trademarks. The nomenclature according to which the book is structured is continually revised and updated by experts

  14. Recycled aggregates in concrete production: engineering properties and environmental impact

    OpenAIRE

    Seddik Meddah Mohammed

    2017-01-01

    Recycled concrete aggregate is considered as the most abundant and used secondary aggregate in concrete production, other types of solid waste are also being used in concrete for specific purposes and to achieve some desired properties. Recycled aggregates and particularly, recycled concrete aggregate substantially affect the properties and mix design of concrete both at fresh and hardened states since it is known by high porosity due to the adhered layer of old mortar on the aggregate which ...

  15. Analysis of RDX and RDX Breakdown Products in Environmental Samples

    Energy Technology Data Exchange (ETDEWEB)

    Felt, Deborah R.; Larson, Steven L.; Wani, Altaf; Davis, Jeffrey L.

    2003-03-26

    The identification and quantification of explosives and their degradation products in soil and natural waters is helpful in the design of remediation technologies, mobility investigations and performing risk assessments. The objective of this study was to develop a method for the determination of the degradation of nitramine compounds, specifically hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). The analytical methods developed in this study were based on reversed-phase high performance liquid chromatography (HPLC) using both C-18 and CN bonded silica columns to eliminate common interferences. Contaminant identification was further confirmed by performing spectral analysis of the compounds upon elution. The proposed method yields good separation of RDX from its degradation products and from other common energetic compounds. Method detection limits for the proposed method ranged from 0.01 to 0.03 mg/L. This method satisfies the need for analytical techniques to monitor the formation and subsequent degradation products of toxic and carcinogenic nitrosyl substituted nitramines.

  16. Household Production and Environmental Kuznets Curves. Examining the Desirability and Feasibility of Substitution

    Energy Technology Data Exchange (ETDEWEB)

    Pfaff, Alexander S.P.; Chaudhuri, S. [Department of International and Public Affairs, New York, NY 10027 (United States); Nye, Howard L.M. [Department of Economics, Columbia University SIPA, New York, NY 10027 (United States)

    2004-02-01

    This paper provides a theoretical explanation for the widely debated empirical finding of 'Environmental Kuznets Curves', i.e., U-shaped relationships between per-capita income and indicators of environmental quality. We present a household-production model in which the degradation of environmental quality is a by-product of household activities. Households can not directly purchase environmental quality, but can reduce degradation by substituting more expensive cleaner inputs to production for less costly dirty inputs. If environmental quality is a normal good, one expects substitution towards the less polluting inputs, so that increases in income will increase the quality of the environment. It is shown that this only holds for middle income households. Poorer households spend all income on dirty inputs. When they buy more, as income rises, the pollution also rises. they do not want to substitute, as this would reduce consumption of non-environmental services for environmental amenities that are already abundant. Thus, as income rises from low to middle levels, a U shape can result. Yet an N shape might eventually result, as richer households spend all income on clean inputs. Further substitution possibilities are exhausted. Thus as income rises again pollution rises and environmental quality falls.

  17. Spatial Analysis of Environmental Change Impacts on Wheat Production in Mid-Lower North, South Australia

    Energy Technology Data Exchange (ETDEWEB)

    Luo, Q.; Williams, M. [Department of Geographical and Environmental Studies, University of Adelaide, South Australia, 5005 (Australia); Bryan, BV. [Policy and Economic Research Unit, CSIRO Land and Water, Private Bag 2, Glen Osmond, South Australia, 5064 (Australia); Bellotti, W. [School of Agriculture and Wine, University of Adelaide, South Australia, 5371 (Australia)

    2005-09-01

    Three environmental change scenarios (the best scenario, the most likely scenario and the worst scenario) were used by the APSIM (Agricultural Production System sIMulator) Wheat module to study the possible impacts of future environmental change (climate change plus pCO2 change) on wheat production in the Mid-Lower North of South Australia. GIS software was used to manage spatial-climate data and spatial-soil data and to present the results. Study results show that grain yield (kg ha{sup -1}) was adversely affected under the worst environmental change scenario (-100% {approx} -42%) and the most likely environmental change scenario (-58% {approx} -3%). Grain nitrogen content (% N) either increased or decreased depending on the environmental change scenarios used and climate divisions (-25% {approx} +42%). Spatial variability was found for projected impact outcomes within climate divisions indicating the necessity of including the spatial distribution of soil properties in impact assessment.

  18. A proposed tool to integrate environmental and economical assessments of products

    International Nuclear Information System (INIS)

    Senthil, Kumaran D.; Ong, S.K.; Nee, A.Y.C.; Tan, Reginald B.H.

    2003-01-01

    An attempt has been made to interpret the outcomes of a Life Cycle Assessment (LCA) in terms of environmental costs. This attempt ensures the environmental accountability of the products while LCA ensures their eco-friendly nature. Keeping this as an objective, a Life Cycle Environmental Cost Analysis (LCECA) model was developed. This new tool incorporates costing into the LCA practice. This model prescribes a life cycle environmental cost model to estimate and correlate the effects of these costs in all the life cycle stages of the product. The newly developed categories of eco-costs are: costs of effluent treatment/control/disposal, environmental management systems, eco-taxes, rehabilitation, energy and savings of recycling and reuse strategies. The mathematical model of LCECA determines quantitative expressions between the total cost of products and the various eco-costs. The eco-costs of the alternatives are compared with the computational LCECA model. This method enables the environmental as well as the economic assessment of products, which leads to cost-effective, eco-friendly design of products

  19. Materialistic Values and Goals.

    Science.gov (United States)

    Kasser, Tim

    2016-01-01

    Materialism comprises a set of values and goals focused on wealth, possessions, image, and status. These aims are a fundamental aspect of the human value/goal system, standing in relative conflict with aims concerning the well-being of others, as well as one's own personal and spiritual growth. Substantial evidence shows that people who place a relatively high priority on materialistic values/goals consume more products and incur more debt, have lower-quality interpersonal relationships, act in more ecologically destructive ways, have adverse work and educational motivation, and report lower personal and physical well-being. Experimentally activating materialistic aims causes similar outcomes. Given these ills, researchers have investigated means of decreasing people's materialism. Successful interventions encourage intrinsic/self-transcendent values/goals, increase felt personal security, and/or block materialistic messages from the environment. These interventions would likely be more effective if policies were also adopted that diminished contemporary culture's focus on consumption, profit, and economic growth.

  20. Pharmaceuticals and personal care products in environmental waters

    OpenAIRE

    Pedrouzo Lanuza, Marta

    2010-01-01

    En la presente Tesis Doctoral se han desarrollado diferentes métodos analíticos para la determinación de pharmaceuticals and personal care products (PPCPs) en aguas medioambientales. El término PPCPs engloba todos los fármacos, drogas de abuso, hormonas y los excipientes activos incluidos en productos de uso personal, así como los metabolitos, conjugados y sub-productos de transformación. Los métodos desarrollados han estado basados en extracción en fase sólida o extracción con barras magnéti...

  1. Metabolic and environmental aspects of fusion reactor activation products: niobium

    International Nuclear Information System (INIS)

    Easterly, C.E.; Shank, K.E.

    1977-11-01

    A summary of the metabolic and environmental aspects of niobium is presented. The toxicological symptoms from exposure to niobium are given, along with lethal concentration values for acute and chronic exposures. Existing human data are presented; animal uptake and retention data are analyzed for various routes of administration. Recommended metabolic values are also presented along with comments concerning their use and appropriateness. The natural distribution of niobium is given for freshwater, seawater, and the biosphere. Concentration factors and retention of 95 Nb in the environment are discussed with reference to: plant retention via leaf absorption; plant retention via root uptake; uptake in terrestrial animals from plants; uptake in freshwater organisms; uptake in marine organisms; and movement in soil. Conclusions are drawn regarding needs for future work in these areas. This review was undertaken because niobium is expected to be a key metal in the development of commercial fusion reactors. It is recognized that niobium will likely not be used in the first generation reactors as a structural material but will appear as an alloy in such materials as superconducting wire

  2. Metabolic and environmental aspects of fusion reactor activation products: niobium

    Energy Technology Data Exchange (ETDEWEB)

    Easterly, C.E.; Shank, K.E.

    1977-11-01

    A summary of the metabolic and environmental aspects of niobium is presented. The toxicological symptoms from exposure to niobium are given, along with lethal concentration values for acute and chronic exposures. Existing human data are presented; animal uptake and retention data are analyzed for various routes of administration. Recommended metabolic values are also presented along with comments concerning their use and appropriateness. The natural distribution of niobium is given for freshwater, seawater, and the biosphere. Concentration factors and retention of /sup 95/Nb in the environment are discussed with reference to: plant retention via leaf absorption; plant retention via root uptake; uptake in terrestrial animals from plants; uptake in freshwater organisms; uptake in marine organisms; and movement in soil. Conclusions are drawn regarding needs for future work in these areas. This review was undertaken because niobium is expected to be a key metal in the development of commercial fusion reactors. It is recognized that niobium will likely not be used in the first generation reactors as a structural material but will appear as an alloy in such materials as superconducting wire.

  3. Global versus local environmental impacts of grazing and confined beef production systems

    NARCIS (Netherlands)

    Modernel, P.; Astigarraga, L.; Picasso, V.

    2013-01-01

    Carbon footprint is a key indicator of the contribution of food production to climate change and its importance is increasing worldwide. Although it has been used as a sustainability index for assessing production systems, it does not take into account many other biophysical environmental dimensions

  4. Extractant Screening for Liquid-Liquid Extraction in Environmentally Benign Production Routes

    NARCIS (Netherlands)

    Krzyzaniak, A.; Schuur, B.; Sukumaran, M.; Zuilhof, H.; Haan, de A.B.

    2011-01-01

    Fermentation processes offer a promising alternative for the production of chemicals by more environmentally benign routes. However, a major challenge in applying this technology remains the recovery of typically highly hydrophilic products from the complex broth. Here, we report the results of a

  5. Dairy production systems in the United States: Nutrient budgets and environmental impacts

    Science.gov (United States)

    Across the diversity of US dairy production systems, nutrient management priorities range widely, from feeding regimes to manure handling, storage and application to crop systems. To assess nutrient management and environmental impacts of dairy production systems in the US, we evaluated nutrient bud...

  6. A watershed-based environmental and regulatory data analysis system for the forest products industry

    Science.gov (United States)

    John Beebe

    2012-01-01

    A watershed-based data analysis system was created as a tool for forest product companies to better understand potential implications from environmental regulations. Also known as the Receiving Water Database (RWDB), this data system was designed with the purpose of assisting companies that own pulp and paper mills, wood product facilities, and commercial timberlands...

  7. Economic and environmental effects of accelerated tariff liberalization in the forest products sector.

    Science.gov (United States)

    D.J. Brooks; J.A. Ferrante; J. Haverkamp; I. Bowles; W. Lange; D. Darr

    2001-01-01

    This study assesses the incremental economic and environmental impacts resulting from changes in the timing and scope of forest products tariff reductions as proposed in the Accelerated Tariff Liberalization (ATL) initiative in forest products. This initiative was proposed for agreement among member countries of the World Trade Organization. The analysis of...

  8. Sustainability evaluation of Sicily's lemon and orange production: an energy, economic and environmental analysis.

    Science.gov (United States)

    Pergola, M; D'Amico, M; Celano, G; Palese, A M; Scuderi, A; Di Vita, G; Pappalardo, G; Inglese, P

    2013-10-15

    The island of Sicily has a long standing tradition in citrus growing. We evaluated the sustainability of orange and lemon orchards, under organic and conventional farming, using an energy, environmental and economic analysis of the whole production cycle by using a life cycle assessment approach. These orchard systems differ only in terms of a few of the inputs used and the duration of the various agricultural operations. The quantity of energy consumption in the production cycle was calculated by multiplying the quantity of inputs used by the energy conversion factors drawn from the literature. The production costs were calculated considering all internal costs, including equipment, materials, wages, and costs of working capital. The performance of the two systems (organic and conventional), was compared over a period of fifty years. The results, based on unit surface area (ha) production, prove the stronger sustainability of the organic over the conventional system, both in terms of energy consumption and environmental impact, especially for lemons. The sustainability of organic systems is mainly due to the use of environmentally friendly crop inputs (fertilizers, not use of synthetic products, etc.). In terms of production costs, the conventional management systems were more expensive, and both systems were heavily influenced by wages. In terms of kg of final product, the organic production system showed better environmental and energy performances. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. The environmental suitability of industrial secondary products used as covering materials in landfills

    International Nuclear Information System (INIS)

    Laine-Ylijoki, J.; Wahlstroem, M.; Maekelae, E.

    2001-01-01

    The industrial secondary products and landmasses polluted in a minor way can be used as coverings and sealing materials and also restricted in the ground construction of landfills. By using suitable secondary products, natural materials can be reduced. Substitutes are needed due to the fact that the availability of natural materials is poor in many areas. The presented project is a part of the Streams technology programme financed by Tekes. It includes the development of the measuring methods to study the environmental suitability of industrial secondary products, which will be used as covering materials of landfills. Based on the results, a handbook addressing the environmental suitability procedure will be compiled

  10. Environmental services coupled to food products and brands: food companies interests and on-farm accounting.

    Science.gov (United States)

    Kempa, Daniela

    2013-09-01

    Much research has been carried out on governmental support of agri environmental measures (AEM). However, little is known about demands on and incentives from the commercial market for environmental contributions of the farmers. The factors farm structures, level of remuneration and legal framework have been thoroughly investigated. However, demands of the food industry for environmentally friendly goods(1) and their effects on farmers' decisions have not yet been analyzed. Leading companies in the food industry have observed an increasing consumer awareness and, due to higher competition, see an additional need to communicate environmental benefits which result from either organic production methods or agri-environmental measures. To address this research deficit, two case studies were carried out. The first case study is a survey aimed at the industrial food producers' demands with regards to the environmental performance of supplying farms. Concurrently, within a second survey farmers were questioned to find out what conditions are required to implement agri-environmental measures beyond cross compliance and document their environmental performance. This article presents the outcomes of the first case study. The results show that food companies have an interest in the documentation of environmental benefits of supplying farms for their marketing strategies. Provision of support by finance or contract-design is also seen as appropriate tool to promote an environmentally friendly production. In turn the food producers' demand and support for documented environmental services can have a positive influence on farmers' decisions for implementation and documentation of these services. Thus, the surveys provide essential findings for further development of documentation strategies for environmental benefits within the supply chain. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Environmental Policies, Product Market Regulation and Innovation in Renewable Energy

    International Nuclear Information System (INIS)

    Nesta, Lionel; Vona, Francesco; Nicolli, Francesco

    2012-10-01

    We investigate the effectiveness of policies in favor of innovation in renew- able energy under different levels of competition. Using information regarding renewable energy policies, product market regulation and high-quality green patents for OECD countries since the late 1970's, we develop a pre-sample mean count-data econometric specification that also accounts for the endogeneity of policies. We find that renewable energy policies are significantly more effective in fostering green innovation in countries with deregulated energy markets. We also find that public support for renewable energy is crucial only in the generation of high-quality green patents, whereas competition enhances the generation of green patents irrespective of their quality. (authors)

  12. Environmental life cycle assessment of grain maize production: An analysis of factors causing variability.

    Science.gov (United States)

    Boone, Lieselot; Van Linden, Veerle; De Meester, Steven; Vandecasteele, Bart; Muylle, Hilde; Roldán-Ruiz, Isabel; Nemecek, Thomas; Dewulf, Jo

    2016-05-15

    To meet the growing demand, high yielding, but environmentally sustainable agricultural plant production systems are desired. Today, life cycle assessment (LCA) is increasingly used to assess the environmental impact of these agricultural systems. However, the impact results are very diverse due to management decisions or local natural conditions. The impact of grain maize is often generalized and an average is taken. Therefore, we studied variation in production systems. Four types of drivers for variability are distinguished: policy, farm management, year-to-year weather variation and innovation. For each driver, scenarios are elaborated using ReCiPe and CEENE (Cumulative Exergy Extraction from the Natural Environment) to assess the environmental footprint. Policy limits fertilisation levels in a soil-specific way. The resource consumption is lower for non-sandy soils than for sandy soils, but entails however more eutrophication. Farm management seems to have less influence on the environmental impact when considering the CEENE only. But farm management choices such as fertiliser type have a large effect on emission-related problems (e.g. eutrophication and acidification). In contrast, year-to-year weather variation results in large differences in the environmental footprint. The difference in impact results between favourable and poor environmental conditions amounts to 19% and 17% in terms of resources and emissions respectively, and irrigation clearly is an unfavourable environmental process. The best environmental performance is obtained by innovation as plant breeding results in a steadily increasing yield over 25 years. Finally, a comparison is made between grain maize production in Flanders and a generically applied dataset, based on Swiss practices. These very different results endorse the importance of using local data to conduct LCA of plant production systems. The results of this study show decision makers and farmers how they can improve the

  13. Policies to support economic and environmental goals at farm and regional scales: Outcomes for rice farmers in Southern India depend on their resource endowment

    NARCIS (Netherlands)

    Senthilkumar, K.; Lubbers, M.T.M.H.; Ridder, de N.; Bindraban, P.S.; Thiyagarajan, T.M.; Giller, K.E.

    2011-01-01

    Improving water use and nitrogen efficiencies is of overall importance to society at large - to conserve scarce water resources and prevent environmental pollution. Efficient cultivation practices for rice which had no yield penalty were not adopted by farmers because of the open access to water

  14. Production of environmentally friendly aerated concrete with required construction and operational properties

    Directory of Open Access Journals (Sweden)

    Tkach Evgeniya

    2018-01-01

    Full Text Available The purpose of these studies is to justify the feasibility of recycling different types of industrial waste instead of conventional expensive raw materials in production of environmentally friendly aerated concrete with required construction and operational properties. The impact of wastes from various industries on the environmental condition of affected areas, as well as the results of their environmental assessment were analyzed to determine whether these wastes could be used in production of high-performance building materials. The assessment of industrial wastes in aerated concrete production suggests that industrial wastes of hazard class IV can be recycled to produce aerated concrete. An environmentally friendly method for large-scale waste recycling, including a two-step environmentally sustainable mechanism, was developed. The basic quality indicators of the modified aerated concrete proved that the environmental safety could be enhanced by strengthening the structure, increasing its uniformity and improving thermal insulation properties. The modified non-autoclaved aerated concrete products with improved physical and operational properties were developed. They have the following properties: density – D700; class of concrete – B3.5; thermal transmittance coefficient – 0.143 W/(m·°C; frost resistance – F75.

  15. Environmental impacts of beef production: Review of challenges and perspectives for durability.

    Science.gov (United States)

    Gerber, Pierre J; Mottet, Anne; Opio, Carolyn I; Falcucci, Alessandra; Teillard, Félix

    2015-11-01

    Beef makes a substantial contribution to food security, providing protein, energy and also essential micro-nutrients to human populations. Rumination allows cattle - and other ruminant species - to digest fibrous feeds that cannot be directly consumed by humans and thus to make a net positive contribution to food balances. This contribution is of particular importance in marginal areas, where agro-ecological conditions and weak infrastructures do not offer much alternative. It is also valuable where cattle convert crop residues and by-products into edible products and where they contribute to soil fertility through their impact on nutrients and organic matter cycles. At the same time, environmental sustainability issues are acute. They chiefly relate to the low efficiency of beef cattle in converting natural resources into edible products. Water use, land use, biomass appropriation and greenhouse gas emissions are for example typically higher per unit of edible product in beef systems than in any other livestock systems, even when corrected for nutritional quality. This particularly causes environmental pressure when production systems are specialized towards the delivery of edible products, in large volumes. The paper discusses environmental challenges at global level, recognizing the large diversity of systems. Beef production is faced with a range of additional sustainability challenges, such as changing consumer perceptions, resilience to climate change, animal health and inequities in access to land and water resources. Entry-points for environmental sustainability improvement are discussed within this broader development context. Copyright © 2015. Published by Elsevier Ltd.

  16. Research of Environmental and Economic Interactions of Coke And By-Product Process

    Science.gov (United States)

    Mikhailov, Vladimir; Kiseleva, Tamara; Bugrova, Svetlana; Muromtseva, Alina; Mikhailova, Yana

    2017-11-01

    The issues of showing relations between environmental and economic indicators (further - environmental and economic interactions) of coke and by-product process are considered in the article. The purpose of the study is to reveal the regularities of the functioning of the local environmental and economic system on the basis of revealed spectrum of environmental and economic interactions. A simplified scheme of the environmental and economic system "coke and by-product process - the environment" was developed. The forms of the investigated environmental-economic interactions were visualized and the selective interpretation of the tightness of the established connection was made. The main result of the work is modeling system of environmental and economic interactions that allows increasing the efficiency of local ecological and economic system management and optimizing the "interests" of an industrial enterprise - the source of negative impact on the environment. The results of the survey can be recommended to government authorities and industrial enterprises with a wide range of negative impact forms to support the adoption of effective management decisions aimed at sustainable environmental and economic development of the region or individual municipalities.

  17. Internalizing environmental costs: A survey of progress in estimating the external environmental costs of electricity production and a review of market-based policies to incorporate them

    International Nuclear Information System (INIS)

    Eto, J.H.; Helcke, G.

    1991-01-01

    The production of electricity creates environmental insults whose costs are not fully reflected in the prices paid by consumers for electricity services. Failure to incorporate these external costs leads to economically inefficient production and consumption decisions. The present work reviews two related efforts to address this market distortion. The first concerns progress in estimating the uninternalized environmental costs of electricity production. The second concerns market-based approaches to internalizing these costs in electricity production and consumption decisions. 10 tabs.; 41 refs

  18. A surplus production model including environmental effects: Application to the Senegalese white shrimp stocks

    Science.gov (United States)

    Thiaw, Modou; Gascuel, Didier; Jouffre, Didier; Thiaw, Omar Thiom

    2009-12-01

    In Senegal, two stocks of white shrimp ( Penaeusnotialis) are intensively exploited, one in the north and another in the south. We used surplus production models including environmental effects to analyse their changes in abundance over the past 10 years and to estimate their Maximum Sustainable Yield (MSY) and the related fishing effort ( EMSY). First, yearly abundance indices were estimated from commercial statistics using GLM techniques. Then, two environmental indices were alternatively tested in the model: the coastal upwelling intensity from wind speeds provided by the SeaWifs database and the primary production derived from satellite infrared images of chlorophyll a. Models were fitted, with or without the environmental effect, to the 1996-2005 time series. They express stock abundance and catches as functions of the fishing effort and the environmental index (when considered). For the northern stock, fishing effort and abundance fluctuate over the period without any clear trends. The model based on the upwelling index explains 64.9% of the year-to-year variability. It shows that the stock was slightly overexploited in 2002-2003 and is now close to full exploitation. Stock abundance strongly depends on environmental conditions; consequently, the MSY estimate varies from 300 to 900 tons according to the upwelling intensity. For the southern stock, fishing effort has strongly increased over the past 10 years, while abundance has been reduced 4-fold. The environment has a significant effect on abundance but only explains a small part of the year-to-year variability. The best fit is obtained using the primary production index ( R2 = 0.75), and the stock is now significantly overfished regardless of environmental conditions. MSY varies from 1200 to 1800 tons according to environmental conditions. Finally, in northern Senegal, the upwelling is highly variable from year to year and constitutes the major factor determining productivity. In the south, hydrodynamic

  19. REDUCING ENVIRONMENTAL IMPACT AND COST OF PRODUCTION FOR DRYING FRUITS

    Directory of Open Access Journals (Sweden)

    Murad Erol

    2013-12-01

    Full Text Available To reduce the production costs for heat used in drying fruit plants was studied using of local biomass from tree branch pruning. The average annual get 3 t / ha biomass whit energy potential of 37 GJ/ha at a cost of up to 60 €/t. biomass at 10 - 50 mm chopped and dried below 20% can be gasefied with TLUD process characterized by high energy conversion efficiency, stability and safety in operation, emissions of CO and PM very low. TLUD process produces on average and 15% biochar that can be used as fuel or as agricultural amendment to increase fertility and for atmospheric carbon sequestration. There have been experiments simulated by model of USCMER 30/60MGB dryer equipped with two thermal modules TLUD FORTE-40 for apple slices drying heat of the apple prinings. Biomass used and biochar resulting chemical and energy were defined as micro-gasification process TLUD. That can dry 205 kg of apple slices in 6 hours with 74 kg of dry biomass to 10% of that remains and 12.2 kg biochar, biochar with or without 52 kg biomass, which costs € 8.55 or € 5.97, ie 4.3 or 6.1 times cheaper than diesel. On dry ton of sliced apple it can produce 59.6 kg biochar with soil seize -174.8 kg. CO2.

  20. A Vision for Incorporating Environmental Effects into Nitrogen Management Decision Support Tools for U.S. Maize Production.

    Science.gov (United States)

    Banger, Kamaljit; Yuan, Mingwei; Wang, Junming; Nafziger, Emerson D; Pittelkow, Cameron M

    2017-01-01

    Meeting crop nitrogen (N) demand while minimizing N losses to the environment has proven difficult despite significant field research and modeling efforts. To improve N management, several real-time N management tools have been developed with a primary focus on enhancing crop production. However, no coordinated effort exists to simultaneously address sustainability concerns related to N losses at field- and regional-scales. In this perspective, we highlight the opportunity for incorporating environmental effects into N management decision support tools for United States maize production systems by integrating publicly available crop models with grower-entered management information and gridded soil and climate data in a geospatial framework specifically designed to quantify environmental and crop production tradeoffs. To facilitate advances in this area, we assess the capability of existing crop models to provide in-season N recommendations while estimating N leaching and nitrous oxide emissions, discuss several considerations for initial framework development, and highlight important challenges related to improving the accuracy of crop model predictions. Such a framework would benefit the development of regional sustainable intensification strategies by enabling the identification of N loss hotspots which could be used to implement spatially explicit mitigation efforts in relation to current environmental quality goals and real-time weather conditions. Nevertheless, we argue that this long-term vision can only be realized by leveraging a variety of existing research efforts to overcome challenges related to improving model structure, accessing field data to enhance model performance, and addressing the numerous social difficulties in delivery and adoption of such tool by stakeholders.

  1. A Vision for Incorporating Environmental Effects into Nitrogen Management Decision Support Tools for U.S. Maize Production

    Directory of Open Access Journals (Sweden)

    Kamaljit Banger

    2017-07-01

    Full Text Available Meeting crop nitrogen (N demand while minimizing N losses to the environment has proven difficult despite significant field research and modeling efforts. To improve N management, several real-time N management tools have been developed with a primary focus on enhancing crop production. However, no coordinated effort exists to simultaneously address sustainability concerns related to N losses at field- and regional-scales. In this perspective, we highlight the opportunity for incorporating environmental effects into N management decision support tools for United States maize production systems by integrating publicly available crop models with grower-entered management information and gridded soil and climate data in a geospatial framework specifically designed to quantify environmental and crop production tradeoffs. To facilitate advances in this area, we assess the capability of existing crop models to provide in-season N recommendations while estimating N leaching and nitrous oxide emissions, discuss several considerations for initial framework development, and highlight important challenges related to improving the accuracy of crop model predictions. Such a framework would benefit the development of regional sustainable intensification strategies by enabling the identification of N loss hotspots which could be used to implement spatially explicit mitigation efforts in relation to current environmental quality goals and real-time weather conditions. Nevertheless, we argue that this long-term vision can only be realized by leveraging a variety of existing research efforts to overcome challenges related to improving model structure, accessing field data to enhance model performance, and addressing the numerous social difficulties in delivery and adoption of such tool by stakeholders.

  2. Dust control products at Hagerman National Wildlife Refuge, Texas: environmental safety and performance

    Science.gov (United States)

    Kunz, Bethany K.; Little, Edward E.

    2015-01-01

    Controlling fugitive dust while protecting natural resources is a challenge faced by all managers of unpaved roads. Unfortunately, road managers choosing between dust control products often have little objective environmental information to aid their decisions. To address this information gap, the U.S. Geological Survey and the U.S. Fish and Wildlife Service collaborated on a field test of three dust control products with the objectives of (a) evaluating product performance under real-world conditions, (b) verifying the environmental safety of products identified as practically nontoxic in laboratory tests, and (c) testing the feasibility of several environmental monitoring techniques for use in dust control tests. In cooperation with refuge staff and product vendors, three products (one magnesium chloride plus binder, one cellulose, and one synthetic fluid plus binder) were applied in July 2012 to replicated road sections at the Hagerman National Wildlife Refuge in Texas. These sections were monitored periodically for 12 months after application. Product performance was assessed by mobile-mounted particulate-matter meters measuring production of fugitive dust and by observations of road conditions. Environmental safety was evaluated through on-site biological observations and leaching tests with samples of treated aggregate. All products reduced dust and improved surface condition during those 12 months. Planned environmental measurements were not always compatible with day-to-day refuge management actions; this incompatibility highlighted the need for flexible biological monitoring plans. As one of the first field tests of dust suppressants that explicitly incorporated biological endpoints, this effort provides valuable information for improving field tests and for developing laboratory or semifield alternatives.

  3. Production structure and international competition position of the German environmental protection economy; Produktionsstruktur und internationale Wettbewerbsposition der deutschen Umweltschutzwirtschaft

    Energy Technology Data Exchange (ETDEWEB)

    Legler, Harald; Schasse, Ulrich [Niedersaechsisches Institut fuer Wirtschaftsforschung e.V., Hannover (Germany)

    2009-06-15

    There exists a connection between the economic structural orientation and international competitiveness on the one hand as well as the environmental political requirements on the other hand. The environmental protection economy fits quite well the profile that Germany is demanded in the international change. Under this aspect, the authors of the contribution under consideration report on the production structure and on the international competition position of the German environmental protection economy. The authors report on (a) the production structure and production dynamics of the environmental protection industry; (b) German environmental protection economy in the international comparison; (c) Goods, building works and services for environmental protection in Germany.

  4. Guidelines for evaluating the environmental performance of Product/Service-Systems through life cycle assessment

    DEFF Research Database (Denmark)

    Kjær, Louise Laumann; Pigosso, Daniela C. A.; McAloone, Tim C.

    2018-01-01

    Product/Service-Systems (PSS) such as integrated solutions, performance-based contracts or sharing systems are often proposed as means to enable improved environmental sustainability. However, PSS are not necessarily environmentally benign compared to conventional systems. Quantitative environmen......Product/Service-Systems (PSS) such as integrated solutions, performance-based contracts or sharing systems are often proposed as means to enable improved environmental sustainability. However, PSS are not necessarily environmentally benign compared to conventional systems. Quantitative....... In this article, we propose a set of guidelines consisting of six steps, which elaborates the LCA process with respect to the specific consideration for PSS assessment. The guidelines were developed based on identified challenges for the application of LCA on PSS, a review of existing LCAs on PSS case studies...

  5. The shaping of environmental impacts from Danish production and consumption of clothing

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Jensen, Charlotte Louise

    2012-01-01

    The article analyses environmental impacts from production and consumption of clothing in Denmark based on 10 business case studies, an ethnographic study of clothing practices among a group of young women, and a statistical analysis of clothing consumption. The environmental strategies and impacts...... are shaped by the businesses' on-going interpretation of external pressures and opportunities, transnational outsourcing of production to newly industrialised countries, changes towards ‘fast fashion’ and lower retail prices. Differences are identified with respect to whether and when companies take...... a need to show environmental commitment publicly. The fast changing fashions and low price strategies encourage increased clothing consumption among young women, unused clothing in their wardrobes and frequent changes of clothing during the week. Concerns about environmental impacts are limited...

  6. Green energy criteria and life cycle assessment in assessing environmental competitiveness of energy products

    International Nuclear Information System (INIS)

    Maelkki, H.; Hongisto, M.; Turkulainen, T.; Kuisma, J.; Loikkanen, T.

    1999-01-01

    The liberalisation of energy markets has increased the need to enlarge the information base of fuel chains, to evaluate the environmental quality of energy products transparently and to communicate results in a credible way. The preparedness of energy purchasers, producers and sellers to support energy choices of their customers and to meet the information requirements of various stake holders can be strengthened. The environmental impacts related to energy products are turning into a significant dimension of competitiveness. Possibilities to promote market-driven environmental protection mechanisms and to construct incentives, which cover the whole energy production system exist and can be supported. Knowledge of environmental impacts of various energy products can be increased by means of several supplementary instruments like eco-profiles, environmental labels and life cycle assessments of products. Life cycle assessment forms a systematic basis of information, which supports the environmental communications directed to various stake holders. In this study selected public LCA-studies concerning energy production have been compared, criteria of green energy have been charted and their outlook has been assessed. In addition the development of an LCA- based relative environmental performance indicator system, which supports various transparent comparisons, has been outlined. The mapping of methodological differences of published LCA-studies regarding various energy alternatives proves, that there is differences e.g. in allocation principles, system boundaries, and age of source information and in many other details. These discrepancies should be known, because they also affect the results. That is why the use of available LCA studies as a basis for comparative assertions may be problematic. The renewability of an energy source is a threshold requirement in eco-energy criteria formulated and introduced by Finnish, Swedish and Norwegian nature conservation

  7. Product environmental footprint of strawberries: Case studies in Estonia and Germany.

    Science.gov (United States)

    Soode-Schimonsky, Eveli; Richter, Klaus; Weber-Blaschke, Gabriele

    2017-12-01

    The environmental impacts of strawberries have been assessed in several studies. However, these studies either present dissimilar results or only focus on single impact categories without offering a comprehensive overview of environmental impacts. We applied the product environmental footprint (PEF) methodology to broadly indicate the environmental impacts of various strawberry production systems in Germany and Estonia by 15 impact categories. Data for the 7 case studies were gathered from two farms with organic and two farms with conventional open field production systems in Estonia and from one farm with conventional open field and one farm with a polytunnel and greenhouse production system in Germany. The greenhouse production system had the highest environmental impact with a PEF of 0.0040. In the field organic production systems, the PEF was 0.0029 and 0.0028. The field conventional production systems resulted in a PEF of 0.0008, 0.0009 and 0.0002. Polytunnel PEF was 0.0006. Human toxicity cancer effects, particulate matter and human toxicity non-cancer effects resulted in the highest impact across all analysed production systems. The main contributors were electricity for cooling, heating the greenhouse and the use of agricultural machinery including fuel burning. While production stage contributed 85% of the total impact in the greenhouse, also other life cycle stages were important contributors: pre-chain resulted in 71% and 90% of impact in conventional and polytunnels, respectively, and cooling was 47% in one organic system. Environmental impact from strawberry cooling can be reduced by more efficient use of the cooling room, increasing the strawberry yield or switching from oil shale electricity to other energy sources. Greenhouse heating is the overall impact hotspot even if it based on renewable resources. A ranking of production systems based on the environmental impact is possible only if all relevant impacts are included. Future studies should aim

  8. The Development of Environmental Productivity: the Case of Danish Energy Plants

    DEFF Research Database (Denmark)

    Henningsen, Geraldine; Henningsen, Arne; Schröder, Sascha Thorsten

    2015-01-01

    the environmental productivity of individual generator units based on a paneldata set for the period 1998 to 2011 that includes virtually all fuel-fired generator units in Denmark. We further decompose total environmental energy conversion productivity into conversion efficiency, best conversion practice ratio......, and conversion scale efficiency and use a global Malmquist index to calculate the yearly changes. By applying time series clustering, we can identify high, middle, and low performance groups of generator units in a dynamic setting. Our results indicate that the sectoral productivity only slightly increased over...... the fourteen years. Furthermore, we find that there is no overall high achiever group, but that the ranking, although time consistent, varies between the different productivity measures. However, we identify steam turbines and combustion engines for combined heat and power production as potential high...

  9. Incorporating lean thinking and life cycle assessment to reduce environmental impacts of plastic injection moulded products

    OpenAIRE

    Cheung, Wai Ming; Leong, Jun; Vichare, Parag

    2017-01-01

    In the last decades, environmental footprint of the product manufacture has emerged as an important public concern, causing manufacturers to re-assess their product’s environmental impacts. Responding to global outcry on global warming, world leaders have agreed to limit global temperature rise to less than 2°C above the temperature in pre-industrial times. As a result, governments and industrial leaders around the world have proposed a roadmap for 80% emissions reduction by 2050. The aim of ...

  10. Current Status and Outlook in the Application of Microalgae in Biodiesel Production and Environmental Protection

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Xin [Key Laboratory of Algal Biology, Institute of Hydrobiology, Chinese Academy of Sciences, Wuhan (China); University of Chinese Academy of Sciences, Beijing (China); Rong, Junfeng [SINOPEC Research Institute of Petroleum Processing, Beijing (China); Chen, Hui; He, Chenliu; Wang, Qiang, E-mail: wangqiang@ihb.ac.cn [Key Laboratory of Algal Biology, Institute of Hydrobiology, Chinese Academy of Sciences, Wuhan (China)

    2014-08-19

    Microalgae have been currently recognized as a group of the most potential feedstocks for biodiesel production due to high productivity potential, efficient biosynthesis of lipids, and less competition with food production. Moreover, utilization of microalgae with environmental purposes (CO{sub 2} fixation, NO{sub x}, and wastewater treatment) and biorefinery has been reported. However, there are still challenges that need to be addressed to ensure stable large-scale production with positive net energy balance. This review gives an overview of the current status of the application of microalgae in biodiesel production and environmental protection. The practical problems not only facing the microalgae biodiesel production but also associated with microalgae application for environmental pollution control, in particular biological fixation of greenhouse gas (CO{sub 2} and NO{sub x}) and wastewater treatment are described in detail. Notably, the synergistic combination of various applications (e.g., food, medicine, wastewater treatment, and flue gas treatment) with biodiesel production could enhance the sustainability and economics of the algal biodiesel production system.

  11. Current status and outlook in the application of microalgae in biodiesel production and environmental protection

    Directory of Open Access Journals (Sweden)

    Xin eZhang

    2014-08-01

    Full Text Available Microalgae have been currently recognized as one group of the most potential feedstocks for biodiesel production due to high productivity potential, efficient biosynthesis of lipids and less competition with food production. Moreover, utilization of microalgae with environmental purposes (CO2 fixation, NOX and wastewater treatment and biorefinery have been reported. However, there are still challenges that need to be addressed to ensure stable large-scale production with positive net energy balance. This review gives an overview of the current status of the application of microalgae in biodiesel production and environmental protection. The practical problems not only facing the microalgae biodiesel production but also associated with microalgae application for environmental pollution control, in particular biological fixation of greenhouse gas (CO2 and NOX and wastewater treatment are described in detail. Notably, the synergistic combination of various applications (e.g. food, medicine, wastewater treatment and flue gas treatment with biodiesel production could enhance the sustainability and economics of the algal biodiesel production system.

  12. High production volume chemical Amine Oxide [C8-C20] category environmental risk assessment

    DEFF Research Database (Denmark)

    Sanderson, Hans; Tibazarwa, Caritas; Greggs, William

    2009-01-01

    and personal care products. Given the lack of persistence or bioaccumulation, and the low likelihood of these chemicals partitioning to soil, the focus of the environmental assessment is on the aquatic environment. In the United States, the E-FAST model is used to estimate effluent concentrations in the United......An environmental assessment of amine oxides has been conducted under the OECD SIDS High Production Volume (HPV) Program via the Global International Council of Chemical Associations (ICCA) Amine Oxides Consortium. Amine oxides are primarily used in conjunction with surfactants in cleaning...... States from manufacturing facilities and from municipal facilities resulting from consumer product uses. Reasonable worst-case ratios of predicted environmental concentration (PEC) to predicted no effect concentration (PNEC) range from 0.04 to 0.003, demonstrating that these chemicals are a low risk...

  13. Inherent health and environmental risk assessment of nanostructured metal oxide production processes.

    Science.gov (United States)

    Torabifard, Mina; Arjmandi, Reza; Rashidi, Alimorad; Nouri, Jafar; Mohammadfam, Iraj

    2018-01-10

    The health and environmental effects of chemical processes can be assessed during the initial stage of their production. In this paper, the Chemical Screening Tool for Exposure and Environmental Release (ChemSTEER) software was used to compare the health and environmental risks of spray pyrolysis and wet chemical techniques for the fabrication of nanostructured metal oxide on a semi-industrial scale with a capacity of 300 kg/day in Iran. The pollution sources identified in each production process were pairwise compared in Expert Choice software using indicators including respiratory damage, skin damage, and environmental damages including air, water, and soil pollution. The synthesis of nanostructured zinc oxide using the wet chemical technique (with 0.523 wt%) leads to lower health and environmental risks compared to when spray pyrolysis is used (with 0.477 wt%). The health and environmental risk assessment of nanomaterial production processes can help select safer processes, modify the operation conditions, and select or modify raw materials that can help eliminate the risks.

  14. Environmental characterization of two potential locations at Hanford for a new production reactor

    Energy Technology Data Exchange (ETDEWEB)

    Watson, E.C.; Becker, C.D.; Fitzner, R.E.; Gano, K.A.; Imhoff, K.L.; McCallum, R.F.; Myers, D.A.; Page, T.L.; Price, K.R.; Ramsdell, J.V.; Rice D.G.; Schreiber D.L.; Skumatz L.A.; Sommer D.J.; Tawil J.J.; Wallace R.W.; Watson D.G.

    1984-09-01

    This report describes various environmental aspects of two areas on the Hanford Site that are potential locations for a New Production Reactor (NPR). The area known as the Skagit Hanford Site is considered the primary or reference site. The second area, termed the Firehouse Site, is considered the alternate site. The report encompasses an environmental characterization of these two potential NPR locations. Eight subject areas are covered: geography and demography; ecology; meteorology; hydrology; geology; cultural resources assessment; economic and social effects of station construction and operation; and environmental monitoring. 80 refs., 68 figs., 109 tabs.

  15. Comparative environmental impact and efficiency assessment of selected hydrogen production methods

    Energy Technology Data Exchange (ETDEWEB)

    Ozbilen, Ahmet, E-mail: Ahmet.Ozbilen@uoit.ca; Dincer, Ibrahim, E-mail: Ibrahim.Dincer@uoit.ca; Rosen, Marc A., E-mail: Marc.Rosen@uoit.ca

    2013-09-15

    The environmental impacts of various hydrogen production processes are evaluated and compared, considering several energy sources and using life cycle analysis. The results indicate that hydrogen produced by thermochemical water decomposition cycles are more environmentally benign options compared to conventional steam reforming of natural gas. The nuclear based four-step Cu–Cl cycle has the lowest global warming potential (0.559 kg CO{sub 2}-eq per kg hydrogen production), mainly because it requires the lowest quantity of energy of the considered processes. The acidification potential results show that biomass gasification has the highest impact on environment, while wind based electrolysis has the lowest. The relation is also investigated between efficiency and environmental impacts. -- Highlights: • Environmental performance of nuclear-based hydrogen production is investigated. • The GWP and AP results are compared with various hydrogen production processes. • Nuclear based 4-step Cu–Cl cycle is found to be an environmentally benign process. • Wind-based electrolysis has the lowest AP value.

  16. Site-Dependent Environmental Impacts of Industrial Hydrogen Production by Alkaline Water Electrolysis

    Directory of Open Access Journals (Sweden)

    Jan Christian Koj

    2017-06-01

    Full Text Available Industrial hydrogen production via alkaline water electrolysis (AEL is a mature hydrogen production method. One argument in favor of AEL when supplied with renewable energy is its environmental superiority against conventional fossil-based hydrogen production. However, today electricity from the national grid is widely utilized for industrial applications of AEL. Also, the ban on asbestos membranes led to a change in performance patterns, making a detailed assessment necessary. This study presents a comparative Life Cycle Assessment (LCA using the GaBi software (version 6.115, thinkstep, Leinfelden-Echterdingen, Germany, revealing inventory data and environmental impacts for industrial hydrogen production by latest AELs (6 MW, Zirfon membranes in three different countries (Austria, Germany and Spain with corresponding grid mixes. The results confirm the dependence of most environmental effects from the operation phase and specifically the site-dependent electricity mix. Construction of system components and the replacement of cell stacks make a minor contribution. At present, considering the three countries, AEL can be operated in the most environmentally friendly fashion in Austria. Concerning the construction of AEL plants the materials nickel and polytetrafluoroethylene in particular, used for cell manufacturing, revealed significant contributions to the environmental burden.

  17. Assessing the environmental impact of energy production from hydrochar generated via hydrothermal carbonization of food wastes.

    Science.gov (United States)

    Berge, Nicole D; Li, Liang; Flora, Joseph R V; Ro, Kyoung S

    2015-09-01

    Although there are numerous studies suggesting hydrothermal carbonization is an environmentally advantageous process for transformation of wastes to value-added products, a systems level evaluation of the environmental impacts associated with hydrothermal carbonization and subsequent hydrochar combustion has not been conducted. The specific objectives of this work are to use a life cycle assessment approach to evaluate the environmental impacts associated with the HTC of food wastes and the subsequent combustion of the generated solid product (hydrochar) for energy production, and to understand how parameters and/or components associated with food waste carbonization and subsequent hydrochar combustion influence system environmental impact. Results from this analysis indicate that HTC process water emissions and hydrochar combustion most significantly influence system environmental impact, with a net negative GWP impact resulting for all evaluated substituted energy-sources except biomass. These results illustrate the importance of electricity production from hydrochar particularly when it is used to offset coal-based energy sources. HTC process water emissions result in a net impact to the environment, indicating a need for developing appropriate management strategies. Results from this analysis also highlight a need for additional exploration of liquid and gas-phase composition, a better understanding of how changes in carbonization conditions (e.g., reaction time and temperature) influence metal and nutrient fate, and the exploration of liquid-phase treatment. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Evaluation of Environmental Health Indicators of Halva and Tahini Production Centers in Ardakan, Yazd

    Directory of Open Access Journals (Sweden)

    Mohammad Taghi Ghaneian

    2014-03-01

    Results: Generally, 75% production centers had favorable hygienic status and 25% had slightly favorable hygienic status. According to obtained results, hygienic status of production centers had relatively favorable and favorable conditions and only in January and February in 31.3% and 18.8% processing hall and 12.5% product store was in a very favorable hygienic status. The results showed that in terms of environmental health status, 62.5% production centers in raw materials store part, 66.66% in production processing hall, 20.83% in packaging hall, 60.41% in product store and 37.5% in bathrooms had favorable status. Based on the results, hygienic status of bathrooms and processing hall achieved lowest and highest score, respectively. Statistical analysis showed that between hygienic status and production rate (p=0.411 there is no significant relationship. Conclusion: The results of this study indicate that the halva and tahini production centers of Ardakan city in terms of environmental health indicators had slightly favorable status to favorable and none of the production centers had not very favorable conditions. The results of this study can be used to improve health status of halva and tahini production centers.

  19. Comparative environmental and economic assessment of production, use and recycling of aluminium cans: Bologna vs Copenhagen

    DEFF Research Database (Denmark)

    Princigallo, Raffaele; Visini, Davide; Bonoli, Alessandra

    2016-01-01

    in the integrated LCA -LCC analysis. The comparative analysis of aluminium cans production, use, collection and recycling in the two systems showed that the best option from an environmental point of view is also leading to higher costs and trade - offs need to be considered in the decision making process....... and Copenhagen. We performed a combined Life Cycle Assessment (LCA) and Life Cycle Costing (LCC) analysis of the purchasing, production and wa ste management of beer aluminium cans, with the aim to compare the environmental and economic performances of the two systems and to identify potential misalignment...

  20. Effect of some environmental parameters on fermentative hydrogen production by Enterobacter cloacae DM11

    Energy Technology Data Exchange (ETDEWEB)

    Nath, K.; Kumar, A.; Das, D. [Indian Inst. of Technology, Kharagpur (India). Dept. of Biotechnology, Fermentation Technology Laboratory

    2006-06-15

    This study addressed the issue of using biological systems for hydrogen production as an environmentally sound alternative to conventional thermochemical and electrochemical processes. In particular, it examined the potential for anaerobic fermentation for biological hydrogen production and the possibility of coupling gaseous energy generation with simultaneous treatment of biodegradable waste materials. The study focused on hydrogen production by anaerobic fermentation using Enterobacter cloacae DM11, a Gram-negative, motile facultative anaerobe. Although hydrogen production by these bacteria depends on many environmental parameters, there is very little information on the effects of these factors in the hydrogen production potential of this organism. For that reason, this study examined the effect of initial medium pH, reaction temperature, initial glucose concentration, and iron (Fe2+) concentration on the fermentative production of hydrogen. Fermentative hydrogen production was carried out by Enterobacter cloacae DM11, using glucose as the substrate. Batch cultivations were performed in a 500 ml custom-designed vertical tubular bioreactor. The maximum molar yield of hydrogen was 3.31 mol (mol glucose){sub 1}. The rate and cumulative volume of hydrogen production decreased at higher initial glucose concentration. The pH of 6.5 at a temperature of 37 degrees C was most suitable for maximum rate of production of hydrogen in batch fermentation. The addition of Fe2+ on hydrogen production had a marginal enhancing effect on total hydrogen production. A simple model developed from the modified Gompertz equation was used to fit the cumulative hydrogen production curve and to estimate the hydrogen production potential, maximum production rate, and lag time. It was concluded that these study results could be used in the development of a high rate continuous hydrogen production process. 30 refs., 4 tabs., 3 figs.

  1. Some Nutritional, Technological and Environmental Advances in the Use of Enzymes in Meat Products

    Directory of Open Access Journals (Sweden)

    Anne y Castro Marques

    2010-01-01

    Full Text Available The growing consumer demand for healthier products has stimulated the development of nutritionally enhanced meat products. However, this can result in undesirable sensory consequences to the product, such as texture alterations in low-salt and low-phosphate meat foods. Additionally, in the meat industry, economical aspects have stimulated researchers to use all the animal parts to maximize yields of marketable products. This paper aimed to show some advances in the use of enzymes in meat processing, particularly the application of the proteolytic enzymes transglutaminase and phytases, associated with nutritional, technological, and environmental improvements.

  2. A guide for evaluating the environmental performance of Product/Service-Systems

    DEFF Research Database (Denmark)

    Kjær, Louise Laumann; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

    Environmental issues, such as climate change, resource depletion and pollution are societal concerns, which are also increasingly affecting the way we do business. Concepts such as circular economy,sharing economy, and service economy, often highlight that more sustainable businesses can be created...... when focusing on product performance (e.g.by offering lighting as a service) rather than the physical products (e.g. by selling light bulbs). Such strategies of integrating products and services to deliver required user functionality are often termed Product/Service-Systems (PSS). This guide...

  3. Catalyst-Free Biodiesel Production Methods: A Comparative Technical and Environmental Evaluation

    Directory of Open Access Journals (Sweden)

    Oseweuba Valentine Okoro

    2018-01-01

    Full Text Available In response to existing global focus on improved biodiesel production methods via highly efficient catalyst-free high temperature and high pressure technologies, this study considered the comparative study of catalyst-free technologies for biodiesel production as an important research area. In this study, therefore, catalyst-free integrated subcritical lipid hydrolysis and supercritical esterification and catalyst-free one step supercritical transesterification processes for biodiesel production have been evaluated via undertaking straight forward comparative energetic and environmental assessments. Energetic comparisons were undertaken after heat integration was performed since energy reduction has favourable effects on the environmental performance of chemical processes. The study confirmed that both processes are capable of producing biodiesel of high purity with catalyst-free integrated subcritical lipid hydrolysis and supercritical esterification characterised by a greater energy cost than catalyst-free one step supercritical transesterification processes for an equivalent biodiesel productivity potential. It was demonstrated that a one-step supercritical transesterification for biodiesel production presents an energetically more favourable catalyst-free biodiesel production pathway compared to the integrated subcritical lipid hydrolysis and supercritical esterification biodiesel production process. The one-step supercritical transesterification for biodiesel production was also shown to present an improved environmental performance compared to the integrated subcritical lipid hydrolysis and supercritical esterification biodiesel production process. This is because of the higher potential environment impact calculated for the integrated subcritical lipid hydrolysis and supercritical esterification compared to the potential environment impact calculated for the supercritical transesterification process, when all material and energy flows are

  4. Implications of environmental regulations on refinery product specification, operation and investment

    International Nuclear Information System (INIS)

    Amin, M.M.

    1992-01-01

    During the 1980s, refiners mainly in OECD countries were occupied with improving their refinery configurations for producing high-value light products which would not only satisfy the product demand slate but also meet the increasingly restrictive environmental regulations. In the 1990s refiners will continue to be challenged to improve the world's air quality not only by producing products that minimize emissions of toxic and hazardous hydrocarbons, but also through the refinery operation itself by investment in upgrading the industry and products to cope with the constant flow of new regulations. These investments will not only be limited to consuming centres but will also be extended to cover exporting refineries as well due to competition of acquiring market shares for product exports. The additional cost will be directly related to product quality and site regulations and will vary from one country to the other. This paper deals mainly with the air pollution and the impact of related environmental issues on the refining industry. Environmental regulations for refinery products in the USA and Europe are examined and international regulations for the tanker industry are noted. (author)

  5. Multi objective optimization model for minimizing production cost and environmental impact in CNC turning process

    Science.gov (United States)

    Widhiarso, Wahyu; Rosyidi, Cucuk Nur

    2018-02-01

    Minimizing production cost in a manufacturing company will increase the profit of the company. The cutting parameters will affect total processing time which then will affect the production cost of machining process. Besides affecting the production cost and processing time, the cutting parameters will also affect the environment. An optimization model is needed to determine the optimum cutting parameters. In this paper, we develop an optimization model to minimize the production cost and the environmental impact in CNC turning process. The model is used a multi objective optimization. Cutting speed and feed rate are served as the decision variables. Constraints considered are cutting speed, feed rate, cutting force, output power, and surface roughness. The environmental impact is converted from the environmental burden by using eco-indicator 99. Numerical example is given to show the implementation of the model and solved using OptQuest of Oracle Crystal Ball software. The results of optimization indicate that the model can be used to optimize the cutting parameters to minimize the production cost and the environmental impact.

  6. Can foraging behavior of Criollo cattle help increase agricultural production and reduce environmental impacts in the arid Southwest?

    Science.gov (United States)

    The Longterm Agroecosystem Research Network (LTAR) was formed to help the nation’s agricultural systems simultaneously increase production and reduce environmental impacts. Eighteen networked sites are conducting a Common Experiment to understand the environmental and economic problems associated wi...

  7. Microbial community-based polyhydroxyalkanoates (PHAs) production from wastewater : Techno-economic analysis and ex-ante environmental assessment

    NARCIS (Netherlands)

    Fernandez Dacosta, Cora; Posada, John A.; Kleerebezem, Robbert; Cuellar, Maria C.; Ramirez, Andrea

    2015-01-01

    This work investigates the potential for polyhydroxybutyrate (PHB) production from wastewater, from a techno-economic and an environmental perspective, examining scale-up opportunities and bottlenecks prior to commercialisation. Conceptual process design, economic, environmental impacts and

  8. Production and environmental impact of dairy cattle production in Denmark 1900–2010

    DEFF Research Database (Denmark)

    Kristensen, Troels; Aaes, Ole; Weisbjerg, Martin Riis

    2015-01-01

    Cattle production during the last century has changed dramatically in Western Europe, including Denmark, with a steady increase in production per animal and in herd and farm size. The effect of these changes on total production, herd efficiency, surplus of nitrogen (N) at herd and farm level......, but that this requires a strong focus on nitrogen management at the farm level and production efficiency in the herd....... and emission of greenhouse gases (GHG) per kg product has been evaluated for the Danish dairy cattle sector based on historic information. Typical farms representing the average situation for Danish dairy cattle farms and land required for feed supply was modeled for the situation in: (A) 1920 – representing...

  9. Cradle-to-gate environmental assessment of enzyme products produced industrially in Denmark by Novozymes A/S

    DEFF Research Database (Denmark)

    Nielsen, Per H.; Oxenbøll, Karen; Wenzel, Henrik

    2007-01-01

    of environmental impact are usually fermentation processes due to electricity and ingredient consumption. Enzyme production has been the subject of significant optimisation during the past decades by implementation of e.g. gene modified production strains, and the provided environmental data are only...... and use of hazardous chemicals. The present paper provides a methodological framework for analysing environmental impacts of enzyme products and environmental data for five characteristic enzyme products. Methods. Life cycle assessment is used as an analytical tool and modelling of enzyme production...... for five representative enzyme products produced by Novozymes in Denmark have been determined, and a basis for further assessments of more of Novozymes' enzyme products has been established. Environmental impacts induced by producing the considered enzyme products vary by a factor 10 or more depending...

  10. Grassland-Cropping Rotations: An Avenue for Agricultural Diversification to Reconcile High Production with Environmental Quality.

    Science.gov (United States)

    Lemaire, Gilles; Gastal, François; Franzluebbers, Alan; Chabbi, Abad

    2015-11-01

    A need to increase agricultural production across the world to ensure continued food security appears to be at odds with the urgency to reduce the negative environmental impacts of intensive agriculture. Around the world, intensification has been associated with massive simplification and uniformity at all levels of organization, i.e., field, farm, landscape, and region. Therefore, we postulate that negative environmental impacts of modern agriculture are due more to production simplification than to inherent characteristics of agricultural productivity. Thus by enhancing diversity within agricultural systems, it should be possible to reconcile high quantity and quality of food production with environmental quality. Intensification of livestock and cropping systems separately within different specialized regions inevitably leads to unacceptable environmental impacts because of the overly uniform land use system in intensive cereal areas and excessive N-P loads in intensive animal areas. The capacity of grassland ecosystems to couple C and N cycles through microbial-soil-plant interactions as a way for mitigating the environmental impacts of intensive arable cropping system was analyzed in different management options: grazing, cutting, and ley duration, in order to minimize trade-offs between production and the environment. We suggest that integrated crop-livestock systems are an appropriate strategy to enhance diversity. Sod-based rotations can temporally and spatially capture the benefits of leys for minimizing environmental impacts, while still maintaining periods and areas of intensive cropping. Long-term experimental results illustrate the potential of such systems to sequester C in soil and to reduce and control N emissions to the atmosphere and hydrosphere.

  11. How to Get Data from NOAA Environmental Satellites: An Overview of Operations, Products, Access and Archive

    Science.gov (United States)

    Donoho, N.; Graumann, A.; McNamara, D. P.

    2015-12-01

    In this presentation we will highlight access and availability of NOAA satellite data for near real time (NRT) and retrospective product users. The presentation includes an overview of the current fleet of NOAA satellites and methods of data distribution and access to hundreds of imagery and products offered by the Environmental Satellite Processing Center (ESPC) and the Comprehensive Large Array-data Stewardship System (CLASS). In particular, emphasis on the various levels of services for current and past observations will be presented. The National Environmental Satellite, Data, and Information Service (NESDIS) is dedicated to providing timely access to global environmental data from satellites and other sources. In special cases, users are authorized direct access to NESDIS data distribution systems for environmental satellite data and products. Other means of access include publicly available distribution services such as the Global Telecommunication System (GTS), NOAA satellite direct broadcast services and various NOAA websites and ftp servers, including CLASS. CLASS is NOAA's information technology system designed to support long-term, secure preservation and standards-based access to environmental data collections and information. The National Centers for Environmental Information (NCEI) is responsible for the ingest, quality control, stewardship, archival and access to data and science information. This work will also show the latest technology improvements, enterprise approach and future plans for distribution of exponentially increasing data volumes from future NOAA missions. A primer on access to NOAA operational satellite products and services is available at http://www.ospo.noaa.gov/Organization/About/access.html. Access to post-operational satellite data and assorted products is available at http://www.class.noaa.gov

  12. Two tools for environmentally conscious designers and product developers of electrical & electronic equipment (EEE)

    DEFF Research Database (Denmark)

    Poll, Christian; Hauschild, Michael Zwicky; Olsen, Stig Irving

    2002-01-01

    The paper presents the two tools 1)"Product families - short cuts to environmental knowledge" and 2)"Eco-conscious design of electrical & electronic equipment (EEE)". Tool 1) comes in form of a handbook. The purpose of this handbook is to ease the work with developing more environmentally sound...... products, thus giving guidelines for development of new products without the companies themselves having to perform an LCA. The handbook describes 5 productfamilies: mobile phones, vacuum cleaners, industrial valves with electronic controls, lighting, ventilation. Tool 2) comes in form of a software tool...... with built in training, guidance, references, calculator and database. The tool provides the basic understanding of how EEE-products in general interact with the environment. The tool gives an overview of the tasks and responsibilities involved in Eco-Desing, and examples of how to choose and quantify...

  13. Environmental Sustainability Analysis and Nutritional Strategies of Animal Production in China.

    Science.gov (United States)

    Tan, Bie; Yin, Yulong

    2017-02-08

    Animal production in China has achieved considerable progress and contributes to 46% of the total agriculture output value of the country. However, this fast expansion of animal production has led to environmental pollution. In this article, we review the status of soil, water, and air pollution associated with animal production in China and analyze the main sources of the pollutants. The government has promulgated regulations and standards, and effective models and technologies have been developed to control pollution during the last 10 years. Because nutrition and feed strategies represent the most effective method of controlling environmental pollution at the source, this review focuses on nutritional technologies, including accurate feed formulation, rational use of additives, and proper processing of feeds. The advances of modern biotechnology and big data systems also provide more modern approaches to decreasing wastage release. These nutritional strategies are expected to promote sustainable development of animal production.

  14. Charcoal production technologies: Environmental and socio-economic impacts with Brazilian examples

    International Nuclear Information System (INIS)

    Paula Fernandes, M. de.

    1991-01-01

    The indirect use of solar energy through photosynthesis, wood and charcoal requires reforestation with fast-growing species to supply continuously charcoal for industrial and domestic needs. This concept, sometimes referred to as an energy farms, is the conversion of sunshine into food, fibre, furniture, paper and pulp products. It the charcoal production uses primitive, low-yield technologies, it endangers the economic viability of the wood energy source and causes negative environmental impacts. 19 refs, 4 figs, 3 tabs

  15. Evaluation of environmentally friendly products for control of fungal diseases of grapes

    OpenAIRE

    Schilder, A.M.C.; Gillett, J.M.; Sysak, R.W.; Wise, J.C.

    2002-01-01

    Various environmentally friendly products were tested for efficacy in controlling powdery mildew, downy mildew, black rot, Phomopsis, and Botrytis bunch rot in grapes over several years. The products tested were: JMS stylet oil (paraffinic oil), Serenade (Bacillus subtilis), Croplife (citrus and coconut extract) + Plant food (foliar fertilizer), Armicarb (potassium bicarbonate), Elexa (chitosan), Milsana (giant knotweed extract), and AQ10 (Ampelomyces quisqua/is). JMS Stylet Oil, Armicarb, Se...

  16. Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products, Part 3: LED Environmental Testing

    Energy Technology Data Exchange (ETDEWEB)

    Tuenge, Jason R.; Hollomon, Brad; Dillon, Heather E.; Snowden-Swan, Lesley J.

    2013-03-01

    This report covers the third part of a larger U.S. Department of Energy (DOE) project to assess the life-cycle environmental and resource impacts in the manufacturing, transport, use, and disposal of light-emitting diode (LED) lighting products in relation to incumbent lighting technologies. All three reports are available on the DOE website (www.ssl.energy.gov/tech_reports.html). • Part 1: Review of the Life-Cycle Energy Consumption of Incandescent, Compact Fluorescent and LED Lamps; • Part 2: LED Manufacturing and Performance; • Part 3: LED Environmental Testing. Parts 1 and 2 were published in February and June 2012, respectively. The Part 1 report included a summary of the life-cycle assessment (LCA) process and methodology, provided a literature review of more than 25 existing LCA studies of various lamp types, and performed a meta-analysis comparing LED lamps with incandescent and compact fluorescent lamps (CFLs). Drawing from the Part 1 findings, Part 2 performed a more detailed assessment of the LED manufacturing process and used these findings to provide a comparative LCA taking into consideration a wider range of environmental impacts. Both reports concluded that the life-cycle environmental impact of a given lamp is dominated by the energy used during lamp operation—the upstream generation of electricity drives the total environmental footprint of the product. However, a more detailed understanding of end-of-life disposal considerations for LED products has become increasingly important as their installation base has grown. The Part 3 study (reported herein) was undertaken to augment the LCA findings with chemical analysis of a variety of LED, CFL, and incandescent lamps using standard testing procedures. A total of 22 samples, representing 11 different models, were tested to determine whether any of 17 elements were present at levels exceeding California or Federal regulatory thresholds for hazardous waste. Key findings include: • The selected

  17. Environmental Sustainability and Economic Benefits of Dairy Farm Biogas Energy Production: A Case Study in Umbria

    Directory of Open Access Journals (Sweden)

    Biancamaria Torquati

    2014-09-01

    Full Text Available Accelerating demand to reduce the environmental impact of fossil fuels has been driving widespread attention to renewable fuels, such as biogas. In fact, in the last decade numerous policy guidelines and laws regarding energy, the environment and agriculture have been issued to encourage the use of animal sewage as a raw material for the production of biogas. The production of energy from biogas in a dairy farm can provide a good opportunity for sustainable rural development, augmenting the farm’s income from traditional sources and helping to reduce the overall environmental impact of the energy sector. This paper investigates the trade-off between the environmental and economic benefits of an agro-energy farm in the Umbria region of Italy that employs livestock sewage and manure, dedicated energy crops (corn and triticale silage and olive waste. The environmental analysis was performed using the LCA methodology, while the economic investigation was carried out by reconstructing the economic balance of the agro-energetic supply chain based on the budgets of each activity performed. The LCA results show, on the one hand, the predominant weight of producing dedicated crops compared to all other processes in the supply chain and, on the other hand, a significant reduction in environmental impact compared to that caused by energy production from fossil fuels. Economic analysis revealed that the results depend significantly on what rate per kWh the government incentives guarantee to agricultural producers of renewable energy.

  18. Shelf life extension as solution for environmental impact mitigation: A case study for bakery products.

    Science.gov (United States)

    Bacenetti, Jacopo; Cavaliere, Alessia; Falcone, Giacomo; Giovenzana, Valentina; Banterle, Alessandro; Guidetti, Riccardo

    2018-06-15

    Over the last years, increasing attention has been paid to environmental concerns related to food production and potential solutions to this issue. Among the different strategies being considered to reduce the impact food production has on the environment, only moderate has been paid to the extension of shelf life; a longer shelf life can reduce food losses as well as the economic and environmental impacts of the distribution logistics. The aim of this study is to assess the environmental performance of whole-wheat breadsticks with extended shelf lives and to evaluate whether the shelf-life extension is an effective mitigation solution from an environmental point of view. To this purpose, the life cycle assessment (LCA) approach was applied from a "cradle-to-grave" perspective. Rosmarinic acid was used as an antioxidant to extend the shelf life. To test the robustness of the results and to investigate the influence of the choices made in the modelling phase, a sensitivity and uncertainty analysis were carried out. The achieved results highlighted how, for 10 of the 12 evaluated impact categories, the shelf-life extension is a proper mitigation solution, and its effectiveness depends on the magnitude of product loss reduction that is achieved. The shelf-life extension doesn't allow for the reduction of environmental impact in the categories of human toxicity, cancer effects and freshwater eutrophication. Copyright © 2018 Elsevier B.V. All rights reserved.

  19. Some Reflections on the Characterisation and Assessment of the Environmental Practice and Competence Development in Companies and Product Chains

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Forman, Marianne

    The paper discusses the concept of coorporate environmental competence and a methodology for the application of the concept in analyses of the shaping of corporate environmental competence in companies and product chains. The paper is based on a number of studies ig the shaping of environmental p...... practice in Danish companies and the interaction within supply chains and other types of network relations.......The paper discusses the concept of coorporate environmental competence and a methodology for the application of the concept in analyses of the shaping of corporate environmental competence in companies and product chains. The paper is based on a number of studies ig the shaping of environmental...

  20. Perception of the environmental impacts of current and alternative modes of pig production by stakeholder groups.

    Science.gov (United States)

    Petit, Jean; van der Werf, Hayo M G

    2003-08-01

    The current industrial pig production model is in crisis, due to its association with environmental pollution, doubtful product quality and lack of animal well-being. In Bretagne (France), a region of intensive pig production, a survey of seven stakeholder groups concerned with pig production was conducted, as part of a research programme dedicated to the assessment of the environmental impact of different modes of pig production. A very large majority of pig producers (93%) and their suppliers (100%) considers pig farms as an asset for the region, whereas a majority of scientists (58%), activists (78%) and consumers (54%) sees it as a handicap. Differences among stakeholder groups are minor with respect to the perceived importance of environmental and social issues. Stakeholders agree on the relative level of responsibility of pig farms with respect to specific problems. For all groups unpleasant odours and water quality come first with respect to responsibility, for most groups soil quality comes second, followed by product safety and air quality. For a future improved mode of pig production, 76% of pig producers and their suppliers prefer to adapt the current model, for all other groups the majority prefers an alternative model. While pig producers and their suppliers prefer a slurry-based housing system, all other groups prefer a straw-based system. Pig producers see the slurry-based system as technically superior and associate the straw-based system with poor working conditions, whereas consumers associate the slurry-based system in the first place with poor water quality and associate the straw-based system with less pollution. These results will be of use in the research programme on the environmental impact of modes of pig production, as they indicate the environmental impacts to be considered and their relative importance. The results will also help in deciding which options should be assessed. It is concluded that the poor image of the current pig

  1. New products. The environmental quality increases; Nuovi prodotti: cresce la qualita' ambientale

    Energy Technology Data Exchange (ETDEWEB)

    Chiapponi, M. [Milan Politecnico, Milan (Italy)

    1999-10-01

    The paper discusses the efforts to prevent and reduce the environmental impacts focused on industrial processes and on improving the environmental compatibility of products. The redesign of large consumption products with the purpose of making them more environmentally sustainable is today a tangible reality which is in constant evolution and needs support both from demand and supply side. [Italian] L'articolo discute il problema della riduzione degli impatti ambientali sui processi industriali del miglioramento della compatibilita' ambientale dei prodotti. Il redesign dei prodotti di largo consumo in funzione di una loro maggiore sostenibilita' ambientale e' infatti oggi una realta' in continua evoluzione e un impegno sul fronte dell'innovazione, che deve essere sostenuto sia sul fronte della domanda che su quello dell'offerta.

  2. Assessing the environmental impact of energy production from hydrochar generated via hydrothermal carbonization waste management

    Science.gov (United States)

    Hydrothermal carbonization (HTC) is a relatively low temperature thermal conversion process that is gaining significant attention as a sustainable and environmentally beneficial approach for the transformation of biomass and waste streams to value-added products. Although there are numerous studies ...

  3. Environmental Design of Industrial Products (EDIP), anchoring of the life cycle concept in industry and society

    DEFF Research Database (Denmark)

    Alting, Leo; Wenzel, Henrik; Hauschild, Michael Zwicky

    1999-01-01

    The Danish methodology and tools for environmental assessment of products (EDIP) became public available in 1996-97. Following the EDIP-project, projects reflecting methodological developments and simplifications for a broader use have been lanuched, also taking the methodology beyond Danish bord...

  4. Grassland-cropping rotations: An avenue for agricultural diversification to reconcile high production with environmental quality

    Science.gov (United States)

    A need to increase agricultural production across the world to ensure continued food security appears to be at odds with the urgency to reduce the negative environmental impacts of intensive agriculture. Around the world, intensification has been associated with massive simplification and uniformity...

  5. Learning as the Construction and Re-Mediation of Activity Systems: Environmental Management in Biogas Production

    Science.gov (United States)

    Pereira Querol, Marco A.; Suutari, Timo; Seppanen, Laura

    2010-01-01

    The purpose of this paper is to present theoretical tools for understanding the dynamics of change and learning during the emergence and development of environmental management activities. The methodology consists of a historical analysis of a case of biogas production that took place in the Southwest region of Finland. The theoretical tools used…

  6. Environmental and economic sustainability of integrated production in bio-refineries : The thistle case in Sardinia

    NARCIS (Netherlands)

    Yazan, Devrim; Mandras, Giovanni; Garau, Giorgio

    2016-01-01

    This paper aims at evaluating the environmental and economic sustainability of bio-refineries that produce multiple products through their supply chains (SCs). A physical enterprise input-output (EIO) model is used to quantify the material/energy/waste flows and integrated to the monetary EIO model

  7. A comparative analysis of environmental impacts of non-fossil energy production methods

    Science.gov (United States)

    Kiss, Adam

    2014-12-01

    The widespread proliferation of other then fossil based energy production methods is a development, which inevitable comes in the next future. It is proven that the photovoltaic conversion or the use of heat of Sun radiation, the water energy, the utilization of the wind, the biomass production, the use of geothermal energy can all produce big amounts of energy for human use. In addition, the nuclear energy from fission is a technology, which has already long history and is widely used. However, these all, like the fossil energy sources, have great impacts on the environment. Nevertheless, the comparison of the environmental effects of these alternative energy sources is not easy. The effects are of considerable different natures and their spatial and the time distributions vary on large scales. The present work overviews the principles and the methodological prerequisites of performing a comparative analysis of the environmental effects for the non-fossil energy production methods. After establishing the basic principles for comparison, we shall go through all the non-fossil energy sources and analyze the most important environmental impacts of each energy production method. In conclusion, the comparison of the environmental effects will be discussed.

  8. A comparative analysis of environmental impacts of non-fossil energy production methods

    Directory of Open Access Journals (Sweden)

    Kiss Adam

    2014-01-01

    Full Text Available The widespread proliferation of other then fossil based energy production methods is a development, which inevitable comes in the next future. It is proven that the photovoltaic conversion or the use of heat of Sun radiation, the water energy, the utilization of the wind, the biomass production, the use of geothermal energy can all produce big amounts of energy for human use. In addition, the nuclear energy from fission is a technology, which has already long history and is widely used. However, these all, like the fossil energy sources, have great impacts on the environment. Nevertheless, the comparison of the environmental effects of these alternative energy sources is not easy. The effects are of considerable different natures and their spatial and the time distributions vary on large scales. The present work overviews the principles and the methodological prerequisites of performing a comparative analysis of the environmental effects for the non-fossil energy production methods. After establishing the basic principles for comparison, we shall go through all the non-fossil energy sources and analyze the most important environmental impacts of each energy production method. In conclusion, the comparison of the environmental effects will be discussed.

  9. Governing the Environmental and Social Dimensions of Pangasius Production in Vietnam: A Review

    NARCIS (Netherlands)

    Bush, S.R.; Nguyen Tri Khiem,; Xuan Sinh, Le

    2009-01-01

    The Vietnamese government's policies for an export-led economy have supported the rapid growth of Pangasius production but have had limited success in mitigating the environmental and social impacts stemming from unplanned and ad hoc expansion. Recognising the poor performance of state regulation

  10. Life cycle environmental performance of miscanthus gasification versus other technologies for electricity production

    DEFF Research Database (Denmark)

    Nguyen, T Lan T; Hermansen, John Erik

    2015-01-01

    In this paper, the life cycle environmental performance of miscanthus gasification for electricity production in Denmark is evaluated and compared with that of direct combustion and anaerobic digestion. Furthermore, the results obtained are compared to those of natural gas to assess the potential...

  11. Environmental impact assessment of dutch tomato crop production in a Venlo glasshouse

    NARCIS (Netherlands)

    Antón, A.; Torrellas, M.; Montero, J.I.; Ruijs, M.N.A.; Vermeulen, P.C.M.; Stanghellini, C.

    2012-01-01

    This environmental impact assessment of the current situation of Dutch tomato production in a Venlo greenhouse in a temperate climate was developed as part of the EUPHOROS project. The project aims to develop a more sustainable greenhouse system with a reduction of external inputs yet with high

  12. Internalizing external environmental costs of agriculture into product prices, Case study for milk and potatoes

    NARCIS (Netherlands)

    Masselink, Dirk Jan

    2007-01-01

    Society has to pay large amounts of money to compensate for the environmental damages caused by farm emissions. These external costs are not fully accounted for in product prices and internalization of these external costs into the cost price of agricultu

  13. Environmental potentials of policy instruments to mitigate nutrient emissions in Chinese livestock production

    NARCIS (Netherlands)

    Zheng, C.; Liu, Y.; Bluemling, B.; Mol, A.P.J.; Chen, J.

    2015-01-01

    To minimize negative environmental impact of livestock production, policy-makers face a challenge to design and implement more effective policy instruments for livestock farmers at different scales. This research builds an assessment framework on the basis of an agent-based model, named ANEM, to

  14. Offshore macroalgae biomass for bioenergy production: Environmental aspects, technological achievements and challenges

    NARCIS (Netherlands)

    Fernand, F.; Israel, A.; Skjermo, J.; Wichard, T.; Timmermans, K.

    2017-01-01

    Economic and environmental developments in the last decades call for the displacement of fossil fuels to alternative energy sources. Biofuels are considered as a part of the solution for this challenge. Sustainable raw materials for the production of transportation biofuels such as biodiesel,

  15. How Many Environmental Impact Indicators Are Needed in the Evaluation of Product Life Cycles?

    Science.gov (United States)

    Steinmann, Zoran J N; Schipper, Aafke M; Hauck, Mara; Huijbregts, Mark A J

    2016-04-05

    Numerous indicators are currently available for environmental impact assessments, especially in the field of Life Cycle Impact Assessment (LCIA). Because decision-making on the basis of hundreds of indicators simultaneously is unfeasible, a nonredundant key set of indicators representative of the overall environmental impact is needed. We aimed to find such a nonredundant set of indicators based on their mutual correlations. We have used Principal Component Analysis (PCA) in combination with an optimization algorithm to find an optimal set of indicators out of 135 impact indicators calculated for 976 products from the ecoinvent database. The first four principal components covered 92% of the variance in product rankings, showing the potential for indicator reduction. The same amount of variance (92%) could be covered by a minimal set of six indicators, related to climate change, ozone depletion, the combined effects of acidification and eutrophication, terrestrial ecotoxicity, marine ecotoxicity, and land use. In comparison, four commonly used resource footprints (energy, water, land, materials) together accounted for 84% of the variance in product rankings. We conclude that the plethora of environmental indicators can be reduced to a small key set, representing the major part of the variation in environmental impacts between product life cycles.

  16. Alternative Silver Production by Environmental Sound Processing of a Sulfo Salt Silver Mineral Found in Bolivia

    Directory of Open Access Journals (Sweden)

    Alexander Birich

    2018-02-01

    Full Text Available Very often, the production of silver causes devastating environmental issues, because of the use of toxic reagents like cyanide and mercury. Due to severe environmental damage caused by humans in the last decades, the social awareness regarding the sustainable production processes is on the rise. Terms like “sustainable” and “green” in product descriptions are becoming more and more popular and producers are forced to satisfy the rising environmental awareness of their customers. Within this work, an alternative environmental sound silver recovery process was developed for a vein type silver ore from Mina Porka, Bolivia. A foregoing characterization of the input material reveals its mineral composition. In the following mineral processing, around 92.9% silver was concentrated by separating 59.5 wt. % of non-silver minerals. Nitric acid leaching of the generated concentrate enabled a silver recovery of up to 98%. The dissolved silver was then separated via copper cementation to generate a metallic silver product of >99% purity. Summarizing all process steps, a silver yield of 87% was achieved in lab scale. A final upscaling trial was conducted to prove the process’ robustness. Within this trial, almost 4 kg of metallic silver with a purity of higher than 99.5 wt. % was produced.

  17. Possible consequences of changing to a more environmental-friendly steel production in China

    International Nuclear Information System (INIS)

    Kolstad, Julie Riise

    2005-01-01

    China is the world's biggest steel producer, the world's biggest steel consumer and the world's biggest polluter. The superpower is forced to change its steel production in a more environmental-friendly way, but necessary measures will be expensive; moreover, they will have consequences far past China's borders. The possible effects are elaborated in the article (ml)

  18. Butanol production from food waste: a novel process for producing sustainable energy and reducing environmental pollution

    Science.gov (United States)

    Efficient utilization of food waste for fuel and chemical production can positively influence both the energy and environmental sustainability. In these studies we investigated use of food waste to produce butanol by Clostridium beijerinckii P260. In control fermentation, 40.5 g/L of glucose (initia...

  19. Role of continual environmental performance improvement in achieving sustainability in uranium production

    International Nuclear Information System (INIS)

    Jarrell, J.P.; Chad, G.M.S.

    2002-01-01

    Although the term sustainable development is commonly used today, there is not yet a commonly accepted definition. Various ways of measuring sustainability have been proposed. To show how these issues are being effectively addressed in modern uranium developments, we will review some methods of defining the environmental component of sustainable development in the mining and mineral-processing sector. Environmental impacts associated with uranium extraction and processing in modern facilities are modest. Air and water emissions are well controlled. Waste materials are subject to comprehensive management programmes. The size of the impacted area is smaller than in other energy sectors, providing good opportunity to minimize land impact. Experience over the past three decades facilitated gradual, persistent, but cumulatively significant environmental improvements in the uranium production sector. Cameco's uranium mining and processing facilities exemplify these improvements. These improvements can be expected to continue, supporting our argument of Cameco's environmental sustainability. (author)

  20. Environmental performances of Sardinian dairy sheep production systems at different input levels.

    Science.gov (United States)

    Vagnoni, E; Franca, A; Breedveld, L; Porqueddu, C; Ferrara, R; Duce, P

    2015-01-01

    Although sheep milk production is a significant sector for the European Mediterranean countries, it shows serious competitiveness gaps. Minimizing the ecological impacts of dairy sheep farming systems could represent a key factor for farmers to bridging the gaps in competitiveness of such systems and also obtaining public incentives. However, scarce is the knowledge about the environmental performance of Mediterranean dairy sheep farms. The main objectives of this paper were (i) to compare the environmental impacts of sheep milk production from three dairy farms in Sardinia (Italy), characterized by different input levels, and (ii) to identify the hotspots for improving the environmental performances of each farm, by using a Life Cycle Assessment (LCA) approach. The LCA was conducted using two different assessment methods: Carbon Footprint-IPCC and ReCiPe end-point. The analysis, conducted "from cradle to gate", was based on the functional unit 1 kg of Fat and Protein Corrected Milk (FPCM). The observed trends of the environmental performances of the studied farming systems were similar for both evaluation methods. The GHG emissions revealed a little range of variation (from 2.0 to 2.3 kg CO2-eq per kg of FPCM) with differences between farming systems being not significant. The ReCiPe end-point analysis showed a larger range of values and environmental performances of the low-input farm were significantly different compared to the medium- and high-input farms. In general, enteric methane emissions, field operations, electricity and production of agricultural machineries were the most relevant processes in determining the overall environmental performances of farms. Future research will be dedicated to (i) explore and better define the environmental implications of the land use impact category in the Mediterranean sheep farming systems, and (ii) contribute to revising and improving the existing LCA dataset for Mediterranean farming systems. Copyright © 2014

  1. Evaluation of the social-environmental impacts associated with the production of panela in Santander (Colombia

    Directory of Open Access Journals (Sweden)

    Martha Melizza Ordoñez-Díaz,

    2017-05-01

    Full Text Available Panela (jaggery or non-centrifuged sugar is a natural food product characterized by its high nutritional value and sweetening power. In the department of Santander, Colombia, the transfor-mation of sugarcane juice into jaggery is carried out mainly in handcrafted sugar mills, which generate a permanent source of employment for rural families. However, according to the results obtained in this study, it should be mentioned that under the current conditions of artisanal production, this agricultural activity involves great physical effort and considerable risk to the workers` health. In addition, it causes significant negative environmental impacts during the production process, standing out changes in the atmospheric composition, microclimatic changes, and pollution of water resources. In order to contribute to the sustainability of the jaggery- production sector in the department of Santander, a qualitative diagnosis of biotic, abiotic and anthropological impacts generated by the production of artisanal jaggery are presented. The current situation of the national jaggery industry and the production process, from cutting sugarcane to the packaging of the final product are described. Identified impacts are characterized and some recommendations to achieve environmentally sustainable production process are provided.

  2. Environmental impacts and production performances of organic agriculture in China: A monetary valuation.

    Science.gov (United States)

    Meng, Fanqiao; Qiao, Yuhui; Wu, Wenliang; Smith, Pete; Scott, Steffanie

    2017-03-01

    Organic agriculture has developed rapidly in China since the 1990s, driven by the increasing domestic and international demand for organic products. Quantification of the environmental benefits and production performances of organic agriculture on a national scale helps to develop sustainable high yielding agricultural production systems with minimum impacts on the environment. Data of organic production for 2013 were obtained from a national survey organized by the Certification and Accreditation Administration of China. Farming performance and environmental impact indicators were screened and indicator values were defined based on an intensive literature review and were validated by national statistics. The economic (monetary) values of farming inputs, crop production and individual environmental benefits were then quantified and integrated to compare the overall performances of organic vs. conventional agriculture. In 2013, organically managed farmland accounted for approximately 0.97% of national arable land, covering 1.158 million ha. If organic crop yields were assumed to be 10%-15% lower than conventional yields, the environmental benefits of organic agriculture (i.e., a decrease in nitrate leaching, an increase in farmland biodiversity, an increase in carbon sequestration and a decrease in greenhouse gas emissions) were valued at 1921 million RMB (320.2 million USD), or 1659 RMB (276.5 USD) per ha. By reducing the farming inputs, the costs saved was 3110 million RMB (518.3 million USD), or 2686 RMB (447.7 USD) per ha. The economic loss associated with the decrease in crop yields from organic agriculture was valued at 6115 million RMB (1019.2 million USD), or 5280 RMB (880 USD) per ha. Although they were likely underestimated because of the complex relationships among farming operations, ecosystems and humans, the production costs saved and environmental benefits of organic agriculture that were quantified in our study compensated substantially for the

  3. Comparative analysis of environmental impacts of agricultural production systems, agricultural input efficiency, and food choice

    Science.gov (United States)

    Clark, Michael; Tilman, David

    2017-06-01

    Global agricultural feeds over 7 billion people, but is also a leading cause of environmental degradation. Understanding how alternative agricultural production systems, agricultural input efficiency, and food choice drive environmental degradation is necessary for reducing agriculture’s environmental impacts. A meta-analysis of life cycle assessments that includes 742 agricultural systems and over 90 unique foods produced primarily in high-input systems shows that, per unit of food, organic systems require more land, cause more eutrophication, use less energy, but emit similar greenhouse gas emissions (GHGs) as conventional systems; that grass-fed beef requires more land and emits similar GHG emissions as grain-feed beef; and that low-input aquaculture and non-trawling fisheries have much lower GHG emissions than trawling fisheries. In addition, our analyses show that increasing agricultural input efficiency (the amount of food produced per input of fertilizer or feed) would have environmental benefits for both crop and livestock systems. Further, for all environmental indicators and nutritional units examined, plant-based foods have the lowest environmental impacts; eggs, dairy, pork, poultry, non-trawling fisheries, and non-recirculating aquaculture have intermediate impacts; and ruminant meat has impacts ∼100 times those of plant-based foods. Our analyses show that dietary shifts towards low-impact foods and increases in agricultural input use efficiency would offer larger environmental benefits than would switches from conventional agricultural systems to alternatives such as organic agriculture or grass-fed beef.

  4. The mechanism behind the environmental kuznets curve for carbon dioxide is unlikely to be sufficient to achieve the 2°C goal

    Science.gov (United States)

    Kornhuber, Kai; Reusser, Dominik E.; Costa, Luis; Kropp, Jürgen P.; Rybski, Diego

    2015-04-01

    Pollution may increase with the income per capita up to a maximum, above which it decreases with the further increase in income per capita, i.e. following an inverse U-shape in the pollution vs. income per capita. Such a behaviour is called the Environmental Kuznets Curves (EKC). In a previous presentation, we reviewed EKC for CO2 exploring its relation between CO2 per capita and the Human Development Index (HDI) between 1990 and 2013. We find evidence for a reduction in CO2 emissions per capita in highly developed countries. We present an updated model according to which the emissions per capita of a country are composed of a component related to the actual state of development and a component related to the change of development. The model leads to four distinct cases of which two have EKC shape and two imply saturation. This outcome is in line with previously suggested qualitative relations. Based on the past trend in parameters of the less extreme version of the EKC curve, we formulate a scenario for the future and contrast it against the RCP scenarios. We find that the mechanisms behind the EKC are unlikely to be sufficient to limit global warming below the 2°C target.

  5. Productivity and environmental regulations. A long run analysis of the Swedish industry

    Energy Technology Data Exchange (ETDEWEB)

    Braennlund, Runar

    2008-01-15

    The aim with this study is to evaluate the potential effects on productivity development in the Swedish manufacturing industry due to changes in environmental regulations over a long time period. The issue is closely related to the so called Porter hypothesis, i.e. whether environmental regulations (of the right kind) that usually is associated with costs triggers mechanisms that enhances efficiency and productivity that finally outweighs the initial cost increase. To test our hypothesis we use historical data spanning over the period 1913-1999 for the Swedish manufacturing sector. The model used is a two stage model were the total factor productivity is calculated in the first stage, and is then used in a second stage as the dependent variable in a regression analysis where one of the independent variables is a measure of regulatory intensity. The results show that the productivity growth has varied considerably over time. The least productive period was the second world war period, whereas the period with the highest productivity growth was the period after the second world war until 1970. Development of emissions follows essentially the same path as productivity growth until 1970. After 1970, however, there is a decoupling in the sense that emissions are decreasing, both in absolute level and as emissions per unit of value added. A rather robust conclusion is that there is no evident relationship between environmental regulations and productivity growth. One explanation is that regulations and productivity actually is unrelated. Another potential explanation is that the regulatory measure used does not capture perceived regulations in a correct way

  6. Goals are not selfish.

    Science.gov (United States)

    von Hippel, William; von Hippel, Frank A

    2014-04-01

    The metaphor of selfish goals is misguided. Organisms can be considered vessels that further the interests of their genes, but not vessels that further the interests of their goals. Although goals can act at cross-purposes to each other and to longevity, such trade-offs are predicted by evolutionary theory. The metaphor of selfish goals provides no purchase on this problem.

  7. Comparing Three Models of Achievement Goals: Goal Orientations, Goal Standards, and Goal Complexes

    Science.gov (United States)

    Senko, Corwin; Tropiano, Katie L.

    2016-01-01

    Achievement goal theory (Dweck, 1986) initially characterized mastery goals and performance goals as opposites in a good-bad dualism of student motivation. A later revision (Harackiewicz, Barron, & Elliot, 1998) contended that both goals can provide benefits and be pursued together. Perhaps both frameworks are correct: Their contrasting views…

  8. Environmental impacts of organic and conventional agricultural products--are the differences captured by life cycle assessment?

    Science.gov (United States)

    Meier, Matthias S; Stoessel, Franziska; Jungbluth, Niels; Juraske, Ronnie; Schader, Christian; Stolze, Matthias

    2015-02-01

    Comprehensive assessment tools are needed that reliably describe environmental impacts of different agricultural systems in order to develop sustainable high yielding agricultural production systems with minimal impacts on the environment. Today, Life Cycle Assessment (LCA) is increasingly used to assess and compare the environmental sustainability of agricultural products from conventional and organic agriculture. However, LCA studies comparing agricultural products from conventional and organic farming systems report a wide variation in the resource efficiency of products from these systems. The studies show that impacts per area farmed land are usually less in organic systems, but related to the quantity produced impacts are often higher. We reviewed 34 comparative LCA studies of organic and conventional agricultural products to analyze whether this result is solely due to the usually lower yields in organic systems or also due to inaccurate modeling within LCA. Comparative LCAs on agricultural products from organic and conventional farming systems often do not adequately differentiate the specific characteristics of the respective farming system in the goal and scope definition and in the inventory analysis. Further, often only a limited number of impact categories are assessed within the impact assessment not allowing for a comprehensive environmental assessment. The most critical points we identified relate to the nitrogen (N) fluxes influencing acidification, eutrophication, and global warming potential, and biodiversity. Usually, N-emissions in LCA inventories of agricultural products are based on model calculations. Modeled N-emissions often do not correspond with the actual amount of N left in the system that may result in potential emissions. Reasons for this may be that N-models are not well adapted to the mode of action of organic fertilizers and that N-emission models often are built on assumptions from conventional agriculture leading to even greater

  9. Local Productive Arrangements for Biodiesel Production in Brazil – Environmental Assessment of Small-holder’s Integrated Oleaginous Crops Management

    Directory of Open Access Journals (Sweden)

    Geraldo Stachetti Rodrigues

    2009-04-01

    Full Text Available Sustainability assessments were carried out in small-holders’ farms in four territories where productive arrangements have been organized for production of minor oleaginous crops under the Brazilian biodiesel program. The study aimed at checking local impacts of the biodiesel productive chains at the rural establishment scale, and promoting the environmental performance of the selected farms, henceforth proposed as sustainable management demonstration units. Assessments were carried out with the APOIA-NovoRural system, which integrates 62 objective and quantitative indicators related to five sustainability dimensions: i Landscape Ecology, ii Environmental Quality (Atmosphere, Water and Soil, iii Socio-cultural Values, iv Economic Values and v Management and Administration. The main results point out that, in general, the ecological dimensions of sustainability, that is, the Landscape Ecology and Atmosphere, Water, and Soil quality indicators, show adequate field conditions, seemingly not yet negatively affected by increases in chemical inputs and natural resources use predicted as important potential impacts of the agro-energy sector. The Economic Values indicators have been favorably influenced in the studied farms, due to a steadier demand and improved prices for the oleaginous crops. On the other hand, valuable positive consequences expected for favoring farmers’ market insertion, such as improved Socio-cultural Values and Management & Administration indicators, are still opportunities to be materialized. The Environmental Management Reports issued to the farmers, based on the presented sustainability assessment procedures, offer valuable documentation and communication means for consolidating the organizational influence of the local productive arrangements studied. These productive arrangements were shown to be determinant for the selection of crop associations and diversification, as well as for the provision of technical assistance

  10. Life Cycle Based Evaluation of Environmental and Economic Impacts of Agricultural Productions in the Mediterranean Area

    Directory of Open Access Journals (Sweden)

    Elena Tamburini

    2015-03-01

    Full Text Available In recent years, there has been an increasing interest in Life Cycle Assessment (LCA applied to estimate the cradle-to-grave environmental impact of agricultural products or processes. Furthermore, including in the analysis an economic evaluation, from the perspective of an integrated life cycle approach, appears nowadays as a fundamental improvement. In particular, Life Cycle Costing (LCC, is a method that could integrate financial data and cost information with metrics of life cycle approaches. In this study, LCA in conjunction with LCC methods were used, with the aim to evaluate the main cost drivers—environmental and economic—of five widely diffused and market-valued agricultural productions (organic tomato and pear, integrated wheat, apple and chicory and to combine the results in order to understand the long-term externalities impacts of agricultural productions. Data obtained in local assessment show a wide margin of improvement of resources management at farms level in the short-term, but also allow for the investigation of future effects of environmental impacts not expressed in product price on the market. Reaching a real sustainable model for agriculture could be a value added approach firstly for farmers, but also for all the people who live in rural areas or use agricultural products.

  11. Can green consumerism replace environmental regulation? A differentiated-products example

    Energy Technology Data Exchange (ETDEWEB)

    Eriksson, Clas [Department of Economics, Swedish University of Agricultural Sciences, P.O. Box 7013, S-750 07 Uppsala (Sweden)

    2004-09-01

    This paper assumes that consumers are willing to pay an extra premium for a good if it has a low impact on the environment. We examine if a little dose of such idealistic behavior has a large impact on the market equilibrium, and to what extent it can replace the environmental regulation. The analysis is carried out in a model with product differentiation, where consumers differ in their preferences for product quality. Consumers' willingness to pay the environmental premium may be uniformly or non-uniformly distributed. Green consumerism will only be modestly influential in both cases, despite the fact that product differentiation leads to relaxed competition and increased profits, and thereby creates leverage.

  12. Socio-Environmental and Sustainability Assessment for Technology Innovations at Pectens Production in Brazil

    Directory of Open Access Journals (Sweden)

    Márcio Ricardo Costa dos Santos

    2008-08-01

    Full Text Available This study presents a practical impact assessment method for the adoption of technology innovations at Pectens In vitro Fertilization Laboratory in Rio de Janeiro State, Brazil. To fulfill the system framework requirements, focused on reproductive and productive enterprises, field visits and interview with the laboratory executive director were carried out. Considering the pectens production activities, 24 socio-environmental indicators were developed and the impact indices were automatically calculated by the system’s spreadsheets. General performance index for the pectens reproduction activities indicated an important contribution of technological innovations for the sustainable production of the In vitro Fertilization Laboratory. The employed method was considered as appropriate for evaluations of sustainability at this agribusiness activity, dealing with indicators as tools in order to identify possible risks for negative impacts. Those indicators include aspects beyond those commonly presented by environmental impact assessments, and were capable to provide adequate management and sustainable development for the studied Organization.

  13. Socio-Environmental Impact Assessment of Oleaginous Crops for Biodiesel Production in Brazil

    Directory of Open Access Journals (Sweden)

    Geraldo Stachetti Rodrigues

    2007-06-01

    Full Text Available Socio-environmental impact assessments were carried out on oleaginous crops for biodiesel production under the context of expanding demand in five regions of Brazil. The study brought together representatives of the main interest groups in Delphi-type workshops. Major impacts are related with increases in demand for inputs, resources, and energy, with potential risks on water quality and habitat conservation. In some instances, management practices may improve soil quality, favoring habitats recovery. Crop intensification is expected to bring important contributions for farmer capacitation, income generation and sources diversity, as well as improved management and administration. Institutional especially designed local productive arrangements offer the best options for fostering sustainable development and avoiding environmental degradation risks, under the scenario of expanding demand on oleaginous crops for biodiesel production.

  14. Effects of environmental variation during seed production on seed dormancy and germination.

    Science.gov (United States)

    Penfield, Steven; MacGregor, Dana R

    2017-02-01

    The environment during seed production has major impacts on the behaviour of progeny seeds. It can be shown that for annual plants temperature perception over the whole life history of the mother can affect the germination rate of progeny, and instances have been documented where these affects cross whole generations. Here we discuss the current state of knowledge of signal transduction pathways controlling environmental responses during seed production, focusing both on events that take place in the mother plant and those that occur directly as a result of environmental responses in the developing zygote. We show that seed production environment effects are complex, involving overlapping gene networks active independently in fruit, seed coat, and zygotic tissues that can be deconstructed using careful physiology alongside molecular and genetic experiments. © The Author 2016. Published by Oxford University Press on behalf of the Society for Experimental Biology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  15. Can green consumerism replace environmental regulation? A differentiated-products example

    International Nuclear Information System (INIS)

    Eriksson, Clas

    2004-01-01

    This paper assumes that consumers are willing to pay an extra premium for a good if it has a low impact on the environment. We examine if a little dose of such idealistic behavior has a large impact on the market equilibrium, and to what extent it can replace the environmental regulation. The analysis is carried out in a model with product differentiation, where consumers differ in their preferences for product quality. Consumers' willingness to pay the environmental premium may be uniformly or non-uniformly distributed. Green consumerism will only be modestly influential in both cases, despite the fact that product differentiation leads to relaxed competition and increased profits, and thereby creates leverage

  16. The Building sector commitment to promote the sustainability of construction products: a common European approach for the Environmental Product Performances

    Directory of Open Access Journals (Sweden)

    Caterina Gargari

    2013-05-01

    Full Text Available The industry of construction products plays an important role in Europe in promoting the sustainability of the built environment in a life cycle perspective. Within the framework of the European initiatives for a sustainable competitiveness, manufacturers are interested in promoting a life cycle approach along the building chain. However both, institutions and building operators, in general still have to go a long way on designing and applying a sustainable and competitive industrial policy. This paper aims to describe the European background, the regulatory framework, identifying gaps and the actions to be undertaken to promote a market for sustainable products and sustainable buildings. In particular this paper deals with the assessment and communication of the environmental performance of construction products between the operators in the building chain, as a prerequisite for the sustainability of the built environment, and outlines the strategies to implement a proper evaluation and communication process.

  17. Lessons from spatial and environmental assessment of energy potentials for Anaerobic Digestion production systems applied to the Netherlands

    NARCIS (Netherlands)

    Pierie, F.; Benders, R. M. J.; Bekkering, J.; van Gemert, W. J. Th.; Moll, H. C.

    2016-01-01

    Anaerobic digestion (AD) can play an important role in achieving the renewable energy goals set within the European Union. Within this article the focus is placed on reaching the Dutch local renewable production goal set for the year 2020 with locally available biomass waste flows, avoiding

  18. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, BAGHOUSE FILTRATION PRODUCTS, TETRATEC PTFE PRODUCTS, TETRATEX 6212 FILTER SAMPLE

    Science.gov (United States)

    Baghouse filtration products (BFPs) were evaluated by the Air Pollution Control Technology (APCT) Verification Center. The performance factor verified was the mean outlet particle concentration for the filter fabric as a function of the size of those particles equal to and smalle...

  19. Valorisation of fish by-products against waste management treatments--Comparison of environmental impacts.

    Science.gov (United States)

    Lopes, Carla; Antelo, Luis T; Franco-Uría, Amaya; Alonso, Antonio A; Pérez-Martín, Ricardo

    2015-12-01

    Reuse and valorisation of fish by-products is a key process for marine resources conservation. Usually, fishmeal and oil processing factories collect the by-products generated by fishing port and industry processing activities, producing an economical benefit to both parts. In the same way, different added-value products can be recovered by the valorisation industries whereas fishing companies save the costs associated with the management of those wastes. However, it is important to estimate the advantages of valorisation processes not only in terms of economic income, but also considering the environmental impacts. This would help to know if the valorisation of a residue provokes higher impact than other waste management options, which means that its advantages are probably not enough for guarantying a sustainable waste reuse. To that purpose, there are several methodologies to evaluate the environmental impacts of processes, including those of waste management, providing different indicators which give information on relevant environmental aspects. In the current study, a comparative environmental assessment between a valorisation process (fishmeal and oil production) and different waste management scenarios (composting, incineration and landfilling) was developed. This comparison is a necessary step for the development and industrial implementation of these processes as the best alternative treatment for fish by-products. The obtained results showed that both valorisation process and waste management treatments presented similar impacts. However, a significant benefit can be achieved through valorisation of fish by-products. Additionally, the implications of the possible presence of pollutants were discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Environmental Impact Analysis of Acidification and Eutrophication Due to Emissions from the Production of Concrete

    Directory of Open Access Journals (Sweden)

    Tae Hyoung Kim

    2016-06-01

    Full Text Available Concrete is a major material used in the construction industry that emits a large amount of substances with environmental impacts during its life cycle. Accordingly, technologies for the reduction in and assessment of the environmental impact of concrete from the perspective of a life cycle assessment (LCA must be developed. At present, the studies on LCA in relation to greenhouse gas emission from concrete are being carried out globally as a countermeasure against climate change. However, the studies on the impact of the substances emitted in the concrete production process on acidification and eutrophication are insufficient. As such, assessing only a single category of environmental impact may cause a misunderstanding about the environmental friendliness of concrete. The substances emitted in the concrete production process have an impact not only on global warming but also on acidification and eutrophication. Acidification and eutrophication are the main causes of air pollution, forest destruction, red tide phenomena, and deterioration of reinforced concrete structures. For this reason, the main substances among those emitted in the concrete production process that have an impact on acidification and eutrophication were deduced. In addition, an LCA technique through which to determine the major emissions from concrete was proposed and a case analysis was carried out. The substances among those emitted in the concrete production process that are related to eutrophication were deduced to be NOx, NH3, NH4+, COD, NO3−, and PO43−. The substances among those emitted in the concrete production process that are related to acidification, were found to be NOx, SO2, H2S, and H2SO4. The materials and energy sources among those input into the concrete production process, which have the biggest impact on acidification and eutrophication, were found to be coarse aggregate and fine aggregate.

  1. Environmental screening and evaluation of energy-using products (EuP). Final report

    Energy Technology Data Exchange (ETDEWEB)

    Wesnaes, M. (2.-0 LCA consultants ApS, Aalborg, (Denmark)); Thestrup, J. (In-JeT ApS, Birkeroed (Denmark)); Remmen, A. (Aalborg Univ., Aalborg (Denmark))

    2009-07-01

    The objective of this Memorandum is to provide a background document for the Danish Environmental Protection Agency (EPA) for use in assessing the impact of the EuP Directive 2005/32/EC of 6 July 2005. Firstly, it aims to highlight the areas of general environmental impact affected by the directive and shall assist the EPA in prioritising the focus, efforts and instruments to be applied in relation to the implementation of the EuP directive in Denmark. Secondly, it aims at extracting and highlighting horizontal themes from the product oriented policy adopted by the European Commission. The conclusions have been derived by the authors and do not necessarily represent the views of the EPA. However, it is the intention that the conclusions can be used as guidance for selecting the strategic focus points. Many aspects of energy-using products (EuPs) have a negative impact on the environment (emissions to air including greenhouse gases, to soil, water, and energy consumption, etc.). The Council and the European Parliament adopted a Commission proposal for a Directive on establishing a framework for setting Eco-design requirements (e.g. energy efficiency) for all energy using products in the residential, tertiary, and industrial sectors. The Commission launched an invitation to tender for 20 preparatory studies corresponding to the major categories of Energy using Products. The studies provide the Commission with the necessary information background to prepare for the next phases, the impact assessment, the consultation with the Eco-design Forum and a draft implementing measures. References to all the Preparatory Studies are found in section 20. The background papers produced in the preparatory studies describes relevant environmental impact issues, but the conclusions are often focused on energy aspects only. Hence, the Danish EPA is interested in a wider assessment and medium to long-term perspectives of the product groups in terms of total environmental impact

  2. Research on the teaching evaluation reform of agricultural eco-environmental protection specialties under the background of deep integration of production and education

    Science.gov (United States)

    Ma, Guosheng

    2018-02-01

    With the implementation of the personnel training mode of deep integration between production and education, the original evaluation method cannot adapt to the goal of personnel training, so that the traditional teaching evaluation methods need to be reformed urgently. This paper studies and analyzes the four main problems in the teaching evaluation of agricultural eco-environmental protection specialties, and puts forward three measures to reform the teaching evaluation methods: establishing diversified evaluation indexes, establishing diversified evaluation subjects, and establishing diversified evaluation feedback mechanisms.

  3. Analysis of federal and state policies and environmental issues for bioethanol production facilities.

    Science.gov (United States)

    McGee, Chandra; Chan Hilton, Amy B

    2011-03-01

    The purpose of this work was to investigate incentives and barriers to fuel ethanol production from biomass in the U.S. during the past decade (2000-2010). In particular, we examine the results of policies and economic conditions during this period by way of cellulosic ethanol activity in four selected states with the potential to produce different types of feedstocks (i.e., sugar, starch, and cellulosic crops) for ethanol production (Florida, California, Hawaii, and Iowa). Two of the four states, Iowa and California, currently have commercial ethanol production facilities in operation using corn feedstocks. While several companies have proposed commercial scale facilities in Florida and Hawaii, none are operating to date. Federal and state policies and incentives, potential for feedstock production and conversion to ethanol and associated potential environmental impacts, and environmental regulatory conditions among the states were investigated. Additionally, an analysis of proposed and operational ethanol production facilities provided evidence that a combination of these policies and incentives along with the ability to address environmental issues and regulatory environment and positive economic conditions all impact ethanol production. The 2000-2010 decade saw the rise of the promise of cellulosic ethanol. Federal and state policies were enacted to increase ethanol production. Since the initial push for development, expansion of cellulosic ethanol production has not happened as quickly as predicted. Government and private funding supported the development of ethanol production facilities, which peaked and then declined by the end of the decade. Although there are technical issues that remain to be solved to more efficiently convert cellulosic material to ethanol while reducing environmental impacts, the largest barriers to increasing ethanol production appear to be related to government policies, economics, and logistical issues. The numerous federal and state

  4. Implementation plan for the new production reactor capacity environmental impact statement

    International Nuclear Information System (INIS)

    1989-12-01

    The US Department of Energy (DOE) proposed to site, construct, and operate new production reactor (NPR) capacity intended primarily to produce tritium and secondarily to produce plutonium for the US nuclear weapons program. DOE studies show that this new capacity is needed to ensure reliable maintenance of the nation's nuclear weapons stockpile. It also is essential that these necessary nuclear materials be produced in a safe and environmentally sound manner. The DOE has determined that this proposed action constitutes a major federal action that may significantly affect the quality of the human environment; therefore, the DOE will prepare an environmental impact statement (EIS) to assess the potential impacts of the proposed action and reasonable alternatives on the human and natural environment. The EIS will be prepared in accordance with the National Environmental Policy Act of 1969, as implemented in regulations promulgated by the Council on Environmental Quality (CEQ). This EIS implementation plan (IP) includes a description of the proposed action, descriptions of alternatives, a summary of EIS assumptions, a list of environmental issues to be considered in the EIS (including those identified during public scoping activities), a list of proposed agency consultations, a schedule for EIS preparation and related activities, and an annotated outline for the EIS. It is the Department's intent that the EIS on the NPR capacity will serve as the programmatic National Environmental Policy Act (NEPA) review of modernization of DOE defense nuclear materials production of tritium and plutonium. The Department is currently developing a NEPA compliance strategy for modernization of the remainder of the nuclear weapons production complex, which will reference the EIS on NPR capacity. 7 refs., 8 tabs

  5. Bioenergy production and use: Comparative analysis of the economic and environmental effects

    International Nuclear Information System (INIS)

    Hennig, Christiane; Gawor, Marek

    2012-01-01

    Highlights: ► Study of 12 bioenergy generation pathways as to environmental and economic aspects. ► LCA focused on the GWP, acidification, eutrophication, cumulative energy demand. ► Economic analysis determined electricity production costs based on annuity method. ► Wood-based plants have the best characteristics from environmental point of view. ► Wood-based plants have lowest electricity production costs, biogas plants make gain. - Abstract: This study analyses the use of liquid, solid and gaseous biomass for power generation in Germany with respect to the Renewable Energy Sources Act (EEG), a significant policy instrument for promoting electricity generation based on renewable energy sources. The aim is the identification of bioenergy conversion pathways that have a low environmental impact and are cost-effective. To achieve this objective several research steps were undertaken, including a life-cycle analysis (LCA), economic analysis and the determination of the CO 2 abatement costs. Besides, the authors show and discuss how a simplification of the environmental assessment by considering only the impact category greenhouse gases or the application of different calculation methodologies (i.e. allocation rules between electricity and heat produced) can affect the results. Overall the results show that the use of solid (wood) and gaseous biomass pathways causes both the lowest environmental impacts and electricity production costs when used for electricity generation. The choice of the modelling and calculation methodology may significantly influence the outcome (i.e. application of an exergetic allocation increases the environmental burden related to electricity generation). The lowest CO 2 -abatement costs were determined for the biodegradable waste pathway.

  6. Resource consumption and environmental impacts of the agrofood sector: life cycle assessment of italian citrus-based products.

    Science.gov (United States)

    Beccali, Marco; Cellura, Maurizio; Iudicello, Maria; Mistretta, Marina

    2009-04-01

    Food production and consumption cause significant environmental burdens during the product life cycles. As a result of intensive development and the changing social attitudes and behaviors in the last century, the agrofood sector is the highest resource consumer after housing in the EU. This paper is part of an effort to estimate environmental impacts associated with life cycles of the agrofood chain, such as primary energy consumption, water exploitation, and global warming. Life cycle assessment is used to investigate the production of the following citrus-based products in Italy: essential oil, natural juice, and concentrated juice from oranges and lemons. The related process flowcharts, the relevant mass and energy flows, and the key environmental issues are identified for each product. This paper represents one of the first studies on the environmental impacts from cradle to gate for citrus products in order to suggest feasible strategies and actions to improve their environmental performance.

  7. Environmental degradation, global food production, and risk for large-scale migrations

    International Nuclear Information System (INIS)

    Doeoes, B.R.

    1994-01-01

    This paper attempts to estimate to what extent global food production is affected by the ongoing environmental degradation through processes, such as soil erosion, salinization, chemical contamination, ultraviolet radiation, and biotic stress. Estimates have also been made of available opportunities to improve food production efficiency by, e.g., increased use of fertilizers, irrigation, and biotechnology, as well as improved management. Expected losses and gains of agricultural land in competition with urbanization, industrial development, and forests have been taken into account. Although estimated gains in food production deliberately have been overestimated and losses underestimated, calculations indicate that during the next 30-35 years the annual net gain in food production will be significantly lower than the rate of world population growth. An attempt has also been made to identify possible scenarios for large-scale migrations, caused mainly by rapid population growth in combination with insufficient local food production and poverty. 18 refs, 7 figs, 6 tabs

  8. The Development of Environmental Productivity: the Case of Danish Energy Plants

    DEFF Research Database (Denmark)

    Henningsen, Geraldine; Henningsen, Arne; Schröder, Sascha Thorsten

    the environmental productivity of individual generator units based on a panel data set for the period 1998 to 2011 that includes virtually all fuel-fired generator units in Denmark. We further decompose total productivity into technical efficiency, best practice ratio, and scale efficiency and use a global...... Malmquist index to calculate the yearly changes. By applying time series clustering, we can identify high, middle, and low performance groups of generator units in a dynamic setting. Our results indicate that the sectoral productivity only slightly increased over the fourteen years. Furthermore, we find...... that there is no overall high achiever group, but that the ranking, although time consistent, varies between the different productivity measures. However, we identify steam turbines and combustion engines for combined heat and power production as potential high performers, while combustion engines that only produce...

  9. Integrated production of sugarcane ethanol and soybean biodiesel: Environmental and economic implications of fossil diesel displacement

    International Nuclear Information System (INIS)

    Souza, Simone P.; Seabra, Joaquim E.A.

    2014-01-01

    Highlights: • Sugarcane sector is responsible for around 4% of the diesel consumption in Brazil. • Soybean biodiesel can reduce the fossil diesel demand in the sugarcane sector. • The local use of biodiesel could reduce logistic problems and environmental burdens. • The sugarcane–soybean integration is likely to improve ethanol life cycle performance. • Fiscal incentives could reduce the economic uncertainties of the integration. - Abstract: The sugarcane industry in Brazil has been considered promising for the production of advanced fuels and bio-based products. However, the sugarcane crop requires high volumes of fossil fuel for cultivation and transport. The use of biodiesel as a diesel substitute could reduce the environmental burdens associated with this high consumption. This work performed a stochastic evaluation of the environmental and economic implications of the integrated production of sugarcane bioethanol and soybean biodiesel, in comparison with the traditional sugarcane-to-ethanol process. The analysis was focused on the states of Goiás, Mato Grosso and São Paulo, where this integration would be particularly attractive. The environmental aspects addressed were the fossil energy use and the GHG emissions in a cradle-to-gate approach. The economic analysis comprised the evaluation of the net present value of an incremental cash flow generated by the soybean production and by the adjacent plants of oil extraction and biodiesel. Results indicate that the integrated system is likely to improve the ethanol environmental performance, especially with regard to the fossil energy use. The integration is economically feasible but highly uncertain; however, it could be significantly improved through fiscal incentives to biodiesel producers, founded on the reduction of fossil energy use and on improvements in logistics. In addition, the proposed model may also assist in the design of other integrated systems applied to the sugarcane sector in Brazil

  10. Switchgrass-Based Bioethanol Productivity and Potential Environmental Impact from Marginal Lands in China

    Directory of Open Access Journals (Sweden)

    Xun Zhang

    2017-02-01

    Full Text Available Switchgrass displays an excellent potential to serve as a non-food bioenergy feedstock for bioethanol production in China due to its high potential yield on marginal lands. However, few studies have been conducted on the spatial distribution of switchgrass-based bioethanol production potential in China. This study created a land surface process model (Environmental Policy Integrated Climate GIS (Geographic Information System-based (GEPIC model coupled with a life cycle analysis (LCA to explore the spatial distribution of potential bioethanol production and present a comprehensive analysis of energy efficiency and environmental impacts throughout its whole life cycle. It provides a new approach to study the bioethanol productivity and potential environmental impact from marginal lands based on the high spatial resolution GIS data, and this applies not only to China, but also to other regions and to other types of energy plant. The results indicate that approximately 59 million ha of marginal land in China are suitable for planting switchgrass, and 22 million tons of ethanol can be produced from this land. Additionally, a potential net energy gain (NEG of 1.75 x 106 million MJ will be achieved if all of the marginal land can be used in China, and Yunnan Province offers the most significant one that accounts for 35% of the total. Finally, this study obtained that the total environmental effect index of switchgrass-based bioethanol is the equivalent of a population of approximately 20,300, and a reduction in the global warming potential (GWP is the most significant environmental impact.

  11. Some environmental challenges which the uranium production industry faces in the 21st century

    International Nuclear Information System (INIS)

    Zhang Lisheng

    2004-01-01

    Some of the environmental challenges which the uranium production industry faces in the 21st century have been discussed in the paper. They are: the use of the linear non-threshold (LNT) model for radiation protection, the concept of 'controllable dose' as an alternative to the current International Commission on Radiological Protection (ICRP) system of dose limitation, the future of collective dose and the ALARA (As low As Reasonably Achievable) principle and the application of a risk-based framework for managing hazards. The author proposes that, the risk assessment/risk management framework could be used for managing the environmental, safety and decommissioning issues associated with the uranium fuel cycle. (author)

  12. OPEC production: Capital limitations, environmental movements may interfere with expansion plans

    International Nuclear Information System (INIS)

    Ismail, I.A.H.

    1994-01-01

    Obtaining capital is a critical element in the production expansion plans of OPEC member countries. Another issue that may impact the plans is the environmental taxes that may reduce the call on OPEC oil by 5 million b/d in 2000 and about 16 million b/d in the year 2010. This concluding part of a two-part series discusses the expansion possibilities of non-Middle East OPEC members, OPEC's capital requirements, and environmental concerns. Non-Middle East OPEC includes Algeria, Gabon, Indonesia, Libya, Nigeria, and Venezuela

  13. Genomic selection using indicator traits to reduce the environmental impact of milk production

    DEFF Research Database (Denmark)

    Hansen Axelsson, H; Fikse, W F; Kargo, Morten

    2013-01-01

    The aim of this simulation study was to test the hypothesis that phenotype information of specific indicator traits of environmental importance recorded on a small-scale can be implemented in breeding schemes with genomic selection to reduce the environmental impact of milk production. A stochastic...... was, however, best in the scenarios where the genetic correlation between IT and EI was ≥0.30 and the accuracy of direct genomic value was ≥0.40. The genetic gain in EI was 26 to 34% higher when indicator traits such as greenhouse gases in the breath of the cow and methane recorded in respiration...... of direct genomic values will be reasonably high...

  14. Environmental Impact of the Production of Mealworms as a Protein Source for Humans ? A Life Cycle Assessment

    OpenAIRE

    Oonincx, Dennis G. A. B.; de Boer, Imke J. M.

    2012-01-01

    The demand for animal protein is expected to rise by 70-80% between 2012 and 2050, while the current animal production sector already causes major environmental degradation. Edible insects are suggested as a more sustainable source of animal protein. However, few experimental data regarding environmental impact of insect production are available. Therefore, a lifecycle assessment for mealworm production was conducted, in which greenhouse gas production, energy use and land use were quantified...

  15. Life cycle assessment of energy products: environmental impact assessment of biofuels

    Energy Technology Data Exchange (ETDEWEB)

    Zah, R.; Boeni, H.; Gauch, M.; Hischier, R.; Lehmann, M.; Waeger, P.

    2007-05-15

    This final report for the Swiss Federal Office of Energy (SFOE) deals with the results of a study that evaluated the environmental impact of the entire production chain of fuels made from biomass and used in Switzerland. Firstly, the study supplies an analysis of the possible environmental impacts of biofuels that can be used as a basis for political decisions. Secondly, an environmental life cycle assessment (LCA) of various biofuels is presented. In addition, the impacts of fuel use are compared with other uses for bioenergy such as the generation of electricity and heat. The methods used in the LCA are discussed, including the Swiss method of ecological scarcity (Environmental Impact Points, UBP 06), and the European Eco-indicator 99 method. The results of the study are discussed, including the finding that not all biofuels can reduce environmental impacts as compared to fossil fuels. The role to be played by biofuels produced in an environmentally-friendly way together with other forms of renewable energy in our future energy supply is discussed.

  16. An environmental assessment of electricity production from slaughterhouse residues. Linking urban, industrial and waste management systems

    International Nuclear Information System (INIS)

    Santagata, R.; Ripa, M.; Ulgiati, S.

    2017-01-01

    Highlights: • Animal by-products use for electricity generation is investigated as a case-study. • Different methodological approaches to deal with by-products are explored in LCA. • Adopting a holistic perspective is crucial to achieve a circular economy framework. - Abstract: The food processing industry continues to grow, generating large amount of organically rich waste flows per year: these processors face significant economic and environmental pressures for appropriate conversion and disposal of these waste flows. Solid waste disposal problems, mostly in highly urbanized environments, energy shortages (primarily oil) and/or high petroleum prices, as well as environmental issues such as the shrinking landfill capacity, can all be addressed by converting waste material into useful and saleable products. This paper brings to the attention a possible strategy in order to meet the general EU directives concerning the residues utilization and percentage contribution for the total energy consumption by 2020, by evaluating the use of animal by-products (category 3, as defined in the directive 2002/1774/EC) for energy purposes. Slaughterhouse waste represents an important potential source of renewable energy: on average, 40–50% of a live animal is waste, with a potential energy content close to diesel fuel. Treatment of animal waste from slaughterhouse and the subsequent conversion to electricity is investigated as a case study in the Campania Region (Italy): the animal waste undergoes a rendering process, to separate a protein-rich fraction useful for animal meal production and a fat-rich fraction, to be combusted in a diesel engine for power and heat generation (CHP). An environmental assessment of the entire process is performed by means of LCA, providing a quantitative understanding of the plant processing. The study aims to understand to what extent electricity production from animal fat is environmentally sound and if there are steps and/or components

  17. Environmental Impacts of the Production and Application of Biochar - EuroChar Project

    Science.gov (United States)

    Rack, Mireille; Woods, Jeremy

    2014-05-01

    One of the potential benefits of biochar is carbon sequestration. To determine the overall net sequestration potential it is important to analyse the full supply chain, assessing both the direct and indirect emissions associated with the production and application of biochar. However, it is essential to also incorporate additional environmental impact categories to ensure the assessment of a more complete environmental impact profile. This paper uses a full life-cycle assessment (LCA) methodology to evaluate the results from the EuroChar, 'biochar for carbon sequestration and large-scale removal of GHG from the atmosphere', project. This EU Seventh Framework Programme project aims to investigate and reduce uncertainties around the impacts of, and opportunities for, biochar, and in particular explore possible pathways for its introduction into modern agricultural systems in Europe. The LCA methodology, according to the ISO standards, is applied to the project-specific supply chains to analyse the environmental impacts of biochar production and application. Two conversion technologies for the production of biochar are assessed, gasification and hydrothermal carbonization (HTC), in order to provide conversion efficiencies and emission factors for the biochar production component of the supply chain. The selected feedstocks include those derived from waste residues and dedicated crops. For the end use stage, various forms and methods for biochar application are considered. In addition to the Global Warming Potential category, other environmental impact categories are also included in the analysis. The resulting 'feedstock * conversion technology' matrix provides nine pathways for the production and application of biochar, which are applied as a representative basis for the scenario modelling. These scenarios have been developed in order to assess the feedstock and land availability in Europe for the production and application of biochar and to give an order of

  18. Biofuels and their by-products: Global economic and environmental implications

    International Nuclear Information System (INIS)

    Taheripour, Farzad; Hertel, Thomas W.; Tyner, Wallace E.; Beckman, Jayson F.; Birur, Dileep K.

    2010-01-01

    Recently a number of papers have used general equilibrium models to study the economy-wide and environmental consequences of the first generation of biofuels (FGB). In this paper, we argue that nearly all of these studies have overstated the impacts of FGB on global agricultural and land markets due to the fact that they have ignored the role of biofuel by-products. Feed by-products of FGB, such as dried distillers grains with solubles (DDGS) and oilseed meals (VOBP), are used in the livestock industry as protein and energy sources. Their presence mitigates the price impacts of biofuel production. More importantly, they reduce the demand for cropland and moderate the indirect land use consequences of FGB. This paper explicitly introduces DDGS and VOBP into a global computational general equilibrium (CGE) model, developed at the Center for Global Trade Analysis at Purdue University, to examine the economic and environmental impacts of regional and international mandate policies designed to stimulate bioenergy production and use. We show that models with and without by-products reveal different portraits of the economic impacts of the US and EU biofuel mandates for the world economy in 2015. While both models demonstrate significant changes in the agricultural production pattern across the world, the model with by-products shows smaller changes in the production of cereal grains and larger changes for oilseeds products in the US and EU, and the reverse for Brazil. Models that omit by-products are found to overstate cropland conversion from US and EU mandates by about 27%. (author)

  19. Academic goals in surgery.

    Science.gov (United States)

    Bleier, Joshua I S; Kann, Brian

    2013-12-01

    The development of an academic surgical career can be an overwhelming prospect, and one that is not intuitive. Establishing a structured plan and support structure is critical to success. Starting a successful academic surgical career begins with defining one's academic goals within several broad categories: personal goals, academic goals, research goals, educational goals, and financial goals. Learning the art of self-promotion is the means by which many of these goals are achieved. It is important to realize that achieving these goals requires a delicate personal balance between work and home life, and the key ways in which to achieve success require establishment of well thought-out goals, a reliable support structure, realistic and clear expectations, and frequent re-evaluation.

  20. Modeling Coherent Strategies for the Sustainable Development Goals

    Science.gov (United States)

    Walsh, B.; Obersteiner, M.; Herrero, M.; Riahi, K.; Fritz, S.; van Vuuren, D.; Havlik, P.

    2016-12-01

    The Sustainable Development Goals (SDGs) call for a comprehensive new approach to development rooted in planetary boundaries, equity and inclusivity. Societies have largely responded to this call with siloed strategies capable of making progress on selected subsets of these goals. However, agendas crafted specifically to alleviate poverty, hunger, deforestation, biodiversity loss, or other ills may doom the SDG agenda, as policies and strategies designed to accomplish one or several goals can impede and in some cases reverse progress toward others at national, regional, and global levels. We adopt a comprehensive modeling approach to understand the basis for tradeoffs among environmental conservation initiatives (goals 13-15) and food prices (goal 2). We show that such tradeoffs are manifestations of policy-driven pressure in land (i.e. agricultural and environmental) systems. By reducing total land system pressure, Sustainable Consumption and Production (SCP, goal 12) policies minimize tradeoffs and should therefore be regarded as necessary conditions for achieving multiple SDGs. SDG strategies constructed around SCP policies escape problem-shifting, which has long placed global development and conservation agendas at odds. We expect that this and future systems analyses will allow policymakers to negotiate tradeoffs and exploit synergies as they assemble sustainable development strategies equal in scope to the ambition of the SDGs.