Flexing the PECs: Predicting environmental concentrations of veterinary drugs in Canadian agricultural soils.

Science.gov (United States)

Kullik, Sigrun A; Belknap, Andrew M

2017-03-01

Veterinary drugs administered to food animals primarily enter ecosystems through the application of livestock waste to agricultural land. Although veterinary drugs are essential for protecting animal health, their entry into the environment may pose a risk for nontarget organisms. A means to predict environmental concentrations of new veterinary drug ingredients in soil is required to assess their environmental fate, distribution, and potential effects. The Canadian predicted environmental concentrations in soil (PECsoil) for new veterinary drug ingredients for use in intensively reared animals is based on the approach currently used by the European Medicines Agency for VICH Phase I environmental assessments. The calculation for the European Medicines Agency PECsoil can be adapted to account for regional animal husbandry and land use practices. Canadian agricultural practices for intensively reared cattle, pigs, and poultry differ substantially from those in the European Union. The development of PECsoil default values and livestock categories representative of typical Canadian animal production methods and nutrient management practices culminates several years of research and an extensive survey and analysis of the scientific literature, Canadian agricultural statistics, national and provincial management recommendations, veterinary product databases, and producers. A PECsoil can be used to rapidly identify new veterinary drugs intended for intensive livestock production that should undergo targeted ecotoxicity and fate testing. The Canadian PECsoil model is readily available, transparent, and requires minimal inputs to generate a screening level environmental assessment for veterinary drugs that can be refined if additional data are available. PECsoil values for a hypothetical veterinary drug dosage regimen are presented and discussed in an international context. Integr Environ Assess Manag 2017;13:331-341. © 2016 Her Majesty the Queen in Right of Canada

The comparative study on the environmental impact for various energy generating systems

International Nuclear Information System (INIS)

Jung, J. T.; Ha, J. J.; Jung, H. S.

2002-01-01

The concern about environmental problem due to electricity generation is increasing. And the current debate about the environmental and socioeconomic effects of energy use is now turning towards the internalization of externalities imposed on society and the environment that are not accounted by the producers and consumers of energy. The result of internalization of externalities are to be used in the decision making of selecting available options. Therefore, the environmental impact analysis for various energy generating systems were made by using Life Cycle Assessment(LCA). According to the results, the environmental burden due to nuclear power generating systems is low comparing with other energy generating systems due to low usage of resources. The results will be used in the comparative study on the environmental impacts for various energy generating systems

Environmental dredging residual generation and management.

Science.gov (United States)

Patmont, Clay; LaRosa, Paul; Narayanan, Raghav; Forrest, Casey

2018-05-01

The presence and magnitude of sediment contamination remaining in a completed dredge area can often dictate the success of an environmental dredging project. The need to better understand and manage this remaining contamination, referred to as "postdredging residuals," has increasingly been recognized by practitioners and investigators. Based on recent dredging projects with robust characterization programs, it is now understood that the residual contamination layer in the postdredging sediment comprises a mixture of contaminated sediments that originate from throughout the dredge cut. This mixture of contaminated sediments initially exhibits fluid mud properties that can contribute to sediment transport and contamination risk outside of the dredge area. This article reviews robust dredging residual evaluations recently performed in the United States and Canada, including the Hudson River, Lower Fox River, Ashtabula River, and Esquimalt Harbour, along with other projects. These data better inform the understanding of residuals generation, leading to improved models of dredging residual formation to inform remedy evaluation, selection, design, and implementation. Data from these projects confirm that the magnitude of dredging residuals is largely determined by site conditions, primarily in situ sediment fluidity or liquidity as measured by dry bulk density. While the generation of dredging residuals cannot be avoided, residuals can be successfully and efficiently managed through careful development and implementation of site-specific management plans. Integr Environ Assess Manag 2018;14:335-343. © 2018 The Authors. Integrated Environmental Assessment and Management Published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC). © 2018 The Authors. Integrated Environmental Assessment and Management Published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Environmental natural radioactivity concentrations of Tekirdag

International Nuclear Information System (INIS)

Yarar, Y.; Kam, E.

2004-01-01

Full text: In this study, the environmental natural radioactivity concentrations of Tekirdag, a city in the region of Marmara in Turkey, have been measured. Gamma spectrometric analysis of the soil samples collected from 40 points of Tekirdag was performed by using an HPGe detector and the radionuclide concentrations of the decay products of 238 U and 232 Th series, 40K and 137 Cs were determined. Gross alpha and gross beta activities of the water samples taken from municipal supplies, springs, wells and fountains were performed by using the Berthold, LB770-PC 10, a gas-flow proportional counter. Gamma exposure dose rates were measured by using an Eberline Smart Portable scintillation detector and the annual effective dose equivalents caused by exposure gamma dose rates were calculated

Relationship between people's awareness of environmental capabilities of saving energy, photovoltaic power generation and nuclear power generation

International Nuclear Information System (INIS)

Hashiba, Takashi

2001-01-01

In this research, relationship between people's awareness of environmental capabilities of saving energy, photovoltaic power generation (PV) and nuclear power generation was investigated using questionnaire method. The results showed that saving energy is conducted without reference to its environment preservation effect. However the older people tend to regard saving energy as contribution to environment preservation. The attitude toward usage of PV has a close relationship to awareness of energy environmental concerns. Acceptance of cost sharing for the introducing of wide-scale PV systems to society is related to environment protection image of PV and the attitude toward loss of social convenience lost as a result of saving energy activities. The older people become, the more priority people put on environment protection before the social convenience. There is little relationship between environmental capabilities of nuclear power generation, that never discharge CO 2 on generation, and awareness of energy environmental concerns. (author)

Approaches for controlling air pollutants and their environmental impacts generated from coal-based electricity generation in China.

Science.gov (United States)

Xu, Changqing; Hong, Jinglan; Ren, Yixin; Wang, Qingsong; Yuan, Xueliang

2015-08-01

This study aims at qualifying air pollutants and environmental impacts generated from coal-based power plants and providing useful information for decision makers on the management of coal-based power plants in China. Results showed that approximately 9.03, 54.95, 62.08, and 12.12% of the national carbon dioxide, sulfur dioxide, nitrogen oxides, and particulate matter emissions, respectively, in 2011were generated from coal-based electricity generation. The air pollutants were mainly generated from east China because of the well-developed economy and energy-intensive industries in the region. Coal-washing technology can simply and significantly reduce the environmental burden because of the relativity low content of coal gangue and sulfur in washed coal. Optimizing the efficiency of raw materials and energy consumption is additional key factor to reduce the potential environmental impacts. In addition, improving the efficiency of air pollutants (e.g., dust, mercury, sulfur dioxide, nitrogen oxides) control system and implementing the strict requirements on air pollutants for power plants are important ways for reducing the potential environmental impacts of coal-based electricity generation in China.

Gamma environmental dosimetry and radon concentration in Venezuela

International Nuclear Information System (INIS)

Sajo B, L.; Greaves E, D.

1996-01-01

The environmental radiation levels have been determined in Venezuela by means of different techniques including the passive dosimeters and the alpha and gamma dosimetry besides the gross alpha/beta counting. The most important conclusion is that the presence of artificial radionuclides (Cesium-137, Beryllium-7 and Cadmium-109) was observed in different environmental samples and in food considered contaminant. The values of gamma levels are between 28 and 40 mGy/day and the mean value of radon concentration in closed environment is 36 Bq/m 3 ; the higher values of a factor 10 have been measured in the Andes region. The 20% of analysed drinking water has a concentration of alpha radionuclides emitters less than 0.005 Bq/l and only the 8% is greater than 0.450 Bq/l. (authors). 6 refs., 1 fig

Can environmental conditions experienced in early life influence future generations?

Science.gov (United States)

Burton, Tim; Metcalfe, Neil B

2014-06-22

The consequences of early developmental conditions for performance in later life are now subjected to convergent interest from many different biological sub-disciplines. However, striking data, largely from the biomedical literature, show that environmental effects experienced even before conception can be transmissible to subsequent generations. Here, we review the growing evidence from natural systems for these cross-generational effects of early life conditions, showing that they can be generated by diverse environmental stressors, affect offspring in many ways and can be transmitted directly or indirectly by both parental lines for several generations. In doing so, we emphasize why early life might be so sensitive to the transmission of environmentally induced effects across generations. We also summarize recent theoretical advancements within the field of developmental plasticity, and discuss how parents might assemble different 'internal' and 'external' cues, even from the earliest stages of life, to instruct their investment decisions in offspring. In doing so, we provide a preliminary framework within the context of adaptive plasticity for understanding inter-generational phenomena that arise from early life conditions.

Use of a Concentration Game for Environmental Chemistry Class Review

Science.gov (United States)

Nowosielski, Danica A.

2007-01-01

The concentration game can be used as a complete class or a portion of it to help reinforce the material being presented or for review sessions. An environmental chemistry class review is presented with the use of the concentration game.

Energy and environmental evaluation of tri-generation energy systems

International Nuclear Information System (INIS)

Chicco, G.; Mancarella, P.

2008-01-01

Tri generation facilities manufactured with various technologies represent an important alternative solution for the development more efficient energy systems and low environmental impact. Are described the issues related to modelling and energy and environmental evaluation [it

Life cycle assessment and evaluation of energy payback time on high-concentration photovoltaic power generation system

International Nuclear Information System (INIS)

Nishimura, A.; Hayashi, Y.; Tanaka, K.; Hirota, M.; Kato, S.; Ito, M.; Araki, K.; Hu, E.J.

2010-01-01

In this study, the environmental load of photovoltaic power generation system (PV) during its life cycle and energy payback time (EPT) are evaluated by LCA scheme. Two hypothetical case studies in Toyohashi, Japan and Gobi dessert in China have been carried out to investigate the influence of installation location and PV type on environmental load and EPT. The environmental load and EPT of a high-concentration photovoltaic power generation system (hcpV) and a multi-crystalline silicon photovoltaic power generation system (mc-Si PV) are studied. The study shows for a PV of 100 MW size, the total impacts of the hcpV installed in Toyohashi is larger than that of the hcpV installed in Gobi desert by 5% without consideration of recycling stage. The EPT of the hcpV assumed to be installed in Gobi desert is shorter than EPT of the hcpV assumed to be installed in Toyohashi by 0.64 year. From these results, the superiority to install PV in Gobi desert is certificated. Comparing with hcpV and mc-Si PV, the ratio of the total impacts of mc-Si PV to that of hcpV is 0.34 without consideration of recycling stage. The EPT of hcpV is longer than EPT of mc-Si PV by 0.27 year. The amount of global solar radiation contributing to the amount of power generation of mc-Si PV is larger than the amount of direct solar radiation contributing to the amount of power generation of hcpV by about 188 kW h/(m 2 year) in Gobi desert. Consequently, it appears that using mc-Si PV in Gobi desert is the best option.

Environmental and health effects of fossil fuel and nuclear power generation

International Nuclear Information System (INIS)

Naqvi, S.J.; Black, D.B.; Phillips, C.R.

1978-03-01

The objective of this study was to identify and assess the present and future dimensions of environmental effects and impacts of various energy generation alternatives, and to place safety and environmental risks associated with the nuclear industry in Canada in perspective with the risks from other sources. It was found that nuclear power generation involves a comparable risk to that of conventional methods of thermoelectric power generation

Dysregulation of autism-associated synaptic proteins by psychoactive pharmaceuticals at environmental concentrations.

Science.gov (United States)

Kaushik, Gaurav; Xia, Yu; Pfau, Jean C; Thomas, Michael A

2017-11-20

Autism Spectrum Disorders (ASD) are complex neurological disorders for which the prevalence in the U.S. is currently estimated to be 1 in 50 children. A majority of cases of idiopathic autism in children likely result from unknown environmental triggers in genetically susceptible individuals. These triggers may include maternal exposure of a developing embryo to environmentally relevant minute concentrations of psychoactive pharmaceuticals through ineffectively purified drinking water. Previous studies in our lab examined the extent to which gene sets associated with neuronal development were up- and down-regulated (enriched) in the brains of fathead minnows treated with psychoactive pharmaceuticals at environmental concentrations. The aim of this study was to determine whether similar treatments would alter in vitro expression of ASD-associated synaptic proteins on differentiated human neuronal cells. Human SK-N-SH neuroblastoma cells were differentiated for two weeks with 10μM retinoic acid (RA) and treated with environmentally relevant concentrations of fluoxetine, carbamazepine or venlafaxine, and flow cytometry technique was used to analyze expression of ASD-associated synaptic proteins. Data showed that carbamazepine individually, venlafaxine individually and mixture treatment at environmental concentrations significantly altered the expression of key synaptic proteins (NMDAR1, PSD95, SV2A, HTR1B, HTR2C and OXTR). Data indicated that psychoactive pharmaceuticals at extremely low concentrations altered the in vitro expression of key synaptic proteins that may potentially contribute to neurological disorders like ASD by disrupting neuronal development. Copyright © 2017 Elsevier B.V. All rights reserved.

Generation of tunable and pulsatile concentration gradients via microfluidic network

KAUST Repository

Zhou, Bingpu; Xu, Wei; Wang, Cong; Chau, Yeungyeung; Zeng, Xiping; Zhang, Xixiang; Shen, Rong; Wen, Weijia

2014-01-01

We demonstrate a compact Polydimethylsiloxane microfluidic chip which can quickly generate ten different chemical concentrations simultaneously. The concentration magnitude of each branch can be flexibly regulated based on the flow rate ratios

Energy concentration on S-300 pulsed power generator

Energy Technology Data Exchange (ETDEWEB)

Bakshaev, Yu Z; Chernenko, A S; Korolev, V D; Mizhiritskij, V I; Zazhivikhin, V V [Kurchatov Institute, Moscow (Russian Federation)

1997-12-31

Energy concentration in fast Z-pinch investigation experiments on an 8-module 10 TW pulsed power S-300 generator (1.3 MV, 45 ns FWHM, 0.15 Ohm) is realized by a 3-d vacuum energy concentrator. The concentrator was constructed on the basis of triplate MITLs connected in parallel at the central unit where the Z-pinch is formed. At some start-up experiments on the 8-module installation version at 700 kV incident wave amplitude on concentrator for a gas puff load current of 4 MA with rise time of about 60 ns was obtained. The efficiency or current transfer from the concentrator input to the load for both a gas liner and a short-circuited case was practically the same. (author). 4 figs., 4 refs.

Studies on influence of environmental factors on concentration on concentration of radionuclides

International Nuclear Information System (INIS)

Anon.

1974-01-01

Environmental factors which seemed to influence the concentration of radionuclides to marine organisms including illumination, water temperature, coexisting stable elements, salt concentration, suspended matters in sea water and residue were studied. The influence of illumination was examined by algae using 137 Cs, 60 Co, 85 Sr, and 106 Ru as tracers, within 24 hours of illumination. The concentration of 137 Cs and 60 Co revealed remarkable increase of uptake in accordance with increasing illumination intensity, and 24 hours illumination showed 2 times concentration of that by 4 hours'. 85 Sr and 106 Ru showed no effect of illumination, and suggested their concentration was depending on adsorption to the surface. As for water temperature, the concentration factor of 65 Zn, 137 Cs obtained from fishes and shells by 22 0 C breeding was 2 times of that by 12 0 C breeding. Concerning the influence of coexisting stable elements, fishes and shells were examined by 54 Mn, 60 Co, and 65 Zn as tracers. When the stable elements concentration in sea water became 10 times the normal, concentration factor depending on adsorption and metabolism became respective one tenth and one second of the normal value. The influence of salt concentration was examined using 85 Sr, 65 Zn, and 137 Cs, and revealed that 28 to 40 per cent changes of salt level gave slight influence on concentration factor. In order to study the influence of suspended matters and quality of residue, 3 kinds of 106 Ru complex species were added. Concentration factor of Hijiki (Hijikia fusiforme) showed no remarkable difference between breeding in filtrated and non-filtrated sea water. However, clams living in the sand should be taken care of the concentration by the residue in the sea bottom. (Kanao, N.)

Environmental association of iron minerals and iron concentrations ...

African Journals Online (AJOL)

Environmental association of iron (Fe) minerals and Fe concentrations in soils close to the Kgwakgwe Mn oxide ore abandoned mine, Botswana are investigated in this study. Four hundred soil samples were obtained from a 4 km2 area close to the abandoned mine. The Fe minerals in the soil samples were identified by ...

Environmental Stewardship at the Savannah River Site: Generations of Success - 13212

Energy Technology Data Exchange (ETDEWEB)

Looney, Brian B.; Bergren, Christopher L.; Gaughan, Thomas F.; Aylward, Robert S.; Guevara, Karen C.; Whitaker, Wade C.; Hennessey, Brian T.; Mills, Gary L.; Blake, John I. [Savannah River Site, Aiken SC 29808, 773-42A (United States)

2013-07-01

Approximately sixty years ago, the Savannah River Site (SRS) was built to produce nuclear materials. SRS production operations impacted air, soil, groundwater, ecology, and the local environment. Throughout its history, SRS has addressed these contamination issues directly and has maintained a commitment to environmental stewardship. The Site boasts many environmental firsts. Notably, SRS was the first major Department of Energy (DOE) facility to perform a baseline ecological assessment. This pioneering effort, by Ruth Patrick and the Philadelphia Academy of Sciences, was performed during SRS planning and construction in the early 1950's. This unique early generation of work set the stage for subsequent efforts. Since that time, the scientists and engineers at SRS pro-actively identified environmental problems and developed and implemented effective and efficient environmental management and remediation solutions. This second generation, spanning the 1980's through the 2000's, is exemplified by numerous large and small cleanup actions to address metals and radionuclides, solvents and hydrocarbons, facility and area decommissioning, and ecological restoration. Recently, a third generation of environmental management was initiated as part of Enterprise SRS. This initiative to 'Develop and Deploy Next Generation Cleanup Technologies' formalizes and organizes the major technology matching, development, and implementation processes associated with historical SRS cleanup success as a resource to support future environmental management missions throughout DOE. The four elements of the current, third generation, effort relate to: 1) transition from active to passive cleanup, 2) in situ decommissioning of large nuclear facilities, 3) new long term monitoring paradigms, and 4) a major case study related to support for recovery and restoration of the Japanese Fukushima-Daiichi nuclear power plant and surrounding environment. (authors)

Lichen microalgae are sensitive to environmental concentrations of atrazine.

Science.gov (United States)

Traba, Helena Moreno; Domínguez-Morueco, Noelia; Barreno, Eva; Catalá, Myriam

2017-04-03

The identification of new organisms for environmental toxicology bioassays is currently a priority, since these tools are strongly limited by the ecological relevance of taxa used to study global change. Lichens are sensitive bioindicators of air quality and their microalgae are an untapped source for new low-cost miniaturized bioassays with ecological importance. In order to increase the availability of a wider range of taxa for bioassays, the sensitivity of two symbiotic lichen microalgae, Asterochloris erici and Trebouxia sp. TR9, to atrazine was evaluated. To achieve this goal, axenic cultures of these phycobionts in suspension were exposed to a range of environmental concentrations of the herbicide atrazine, a common water pollutant. Optical density and chlorophyll autofluorescence were used as endpoints of ecotoxicity and ecophysiology on cell suspensions. Results show that lichen microalgae show high sensitivity to very low doses of atrazine, being higher in Asterochloris erici than in Trebouxia sp. TR9. We conclude that environmental concentrations of atrazine could modify population dynamics probably through a shift in reproduction strategies of these organisms. This seminal work is a breakthrough in the use of lichen microalgae in the assessment of micropollution effects on biodiversity.

Environmental dispatch: Minimum cost generation planning for acid rain compliance

International Nuclear Information System (INIS)

Qadri, S.S.; Weinstein, R.E.

1991-01-01

Passage of Public Law 101-549, the 1990 Clean Air Act Amendments, requires reductions in SO 2 and NO x emissions from many power generation stations by 1995, and by an electric utility company's entire generation system by year 2000. Another option to reduce the total environmental emissions is to dispatch generating units with lower emission rates prior to dispatching units with high emission rates. This option may not lower the emission levels to the desired limits, but can reduce emissions. This is practical as long as the added operating cost is modest compared to the cost of alternatives to meet the same levels of emission reduction. This cost can be optimized to provide the best compromise between reduced emissions and operating cost increase. An environmental dispatch algorithm developed by Gilbert/Commonwealth for its eVOLVE-p trademark production costing program makes this optimization possible. The algorithm modifies the traditional economic dispatch order of utility generation to include the impact of the Clean Air Act Amendments. The dispatch order is based on emissions in excess of Clean Air Act compliance limits. A cost is assigned to the excess emissions, and these costs are distributed to the individual generating units in proportion to their emission rates. This paper discusses how this environmental dispatch algorithm is applied for utility generation compliance planning

Effect of source and environmental factors on Rn-222 air concentration

International Nuclear Information System (INIS)

Mamoon, A.

2005-01-01

Rn-222(radon) air concentration depends on several factors. Some of the factors are source related and other factors are environmentally related. Because high levels of radon concentrations in air have potential health effects, it is important to study the impact of the various factors affecting radon air concentration. Laboratory scale investigations of the various factors affecting radon air concentration were carried out under controlled conditions that allow variation of the various variables

Relationship between people's awareness of environmental capabilities of saving energy, photovoltaic power generation and nuclear power generation

Energy Technology Data Exchange (ETDEWEB)

Hashiba, Takashi [Institute of Nuclear Safety System Inc., Mihama, Fukui (Japan)

2001-09-01

In this research, relationship between people's awareness of environmental capabilities of saving energy, photovoltaic power generation (PV) and nuclear power generation was investigated using questionnaire method. The results showed that saving energy is conducted without reference to its environment preservation effect. However the older people tend to regard saving energy as contribution to environment preservation. The attitude toward usage of PV has a close relationship to awareness of energy environmental concerns. Acceptance of cost sharing for the introducing of wide-scale PV systems to society is related to environment protection image of PV and the attitude toward loss of social convenience lost as a result of saving energy activities. The older people become, the more priority people put on environment protection before the social convenience. There is little relationship between environmental capabilities of nuclear power generation, that never discharge CO{sub 2} on generation, and awareness of energy environmental concerns. (author)

New generation LDHI with an improved environmental profile

International Nuclear Information System (INIS)

Fu, Bob; Houston, Christopher; Spratt, Tony

2005-01-01

A new generation of low dosage hydrate inhibitors has been developed. These inhibitors are specially designed and synthesized in the laboratory in order to achieve a high level of performance as hydrate inhibitors and to improve their environmental profiles. These new inhibitors have been extensively evaluated in the laboratory using high pressure rocking cells. They function like anti-agglomerants by preventing the formation of large hydrate crystals or agglomerates. The resulting hydrate crystals are extremely tiny and finely dispersed in the hydrocarbon stream. In addition to controlling the hydrate crystal growth, these novel molecules demonstrate the ability to extend the induction time to onset of hydrate formation. When compared to the previous generations, the improved performance as well as the favorable environmental characteristics further expand the window for LDHI applications in the fields. (Author)

Environmental parameters series. 3. Concentration factors of radionuclides in freshwater organisms

International Nuclear Information System (INIS)

1994-03-01

This report outlines recent research activities of Radioactive Waste Management Center. Aiming to estimate the radiation dose of man exposed to radioactive materials in an environment, construction of a calculation model on the transfer of radionuclide in the environment was attempted. This issue, Environmental parameter series No.3 includes six reports on the factors related to environmental concentration for radionuclides. The title of the reports are as follows; Factors modifying the concentration factor (CF), Evaluation of accumulation of radionuclides in brackish water organisms, Dose assessment, CF derived from Japanese limnological data, Data table of CF and Metabolic parameters in relation to bioaccumulation of elements by organisms. In addition to collect and arrange the existing data, CF was calculated based on the concentration of stable elements in various lakes and rivers in Japan. (M.N.)

Concentrated Windings in Compact Permanent Magnet Synchronous Generators: Managing Efficiency

Directory of Open Access Journals (Sweden)

Olivier Barré

2016-01-01

Full Text Available In electric power generation, customers want generators with high efficiency. Nowadays, modern turbo-generators have efficiencies greater than 98%. Although this amount should not be obtained for all kind of machines, efficiency will remain one of the main parameters for customer choice. Efficiency is also linked to the life of the machine: the higher the efficiency is, the longer the machine’s lifetime. During the past decade, new forms of energy production have appeared and generators have been developed to fit well into this market. For example, wind generators evolved towards permanent magnet generators having high polarity and running at low speed. Nevertheless, their structure is not fixed. An industrial company has built a prototype of such a generator which uses fractional-slot concentrated-windings (FSCW. This kind of winding is not the structure used by default in such electrical machines. Another field of interest is in autonomous generators which can be used on boats. Even if everyone has in mind large merchant ships, we must not forget smaller ships, such as fishing boats and short-range cruise ships, which spend the most of their time near the coast. This kind of ship does nothave large areas for installing the electric generation or the electric propulsion. It is the reason why, in this article, we focus on the efficiency of machines using fractional-slot concentrated-windings. In many publications which compare performances between distributed and concentrated windings, the result is almost the same. The efficiency of FSCW is not as high as the efficiency associated to the machines which are using distributed windings. Design methods have to be redrawn to integrate, as soon as possible, the loss mitigation in order to provide the best efficiency in power conversion. The following discussion, step by step, introduces the loss mitigation in every part of a machine using FSCW. To close the discussion, a design is produced and it

Environmental Impact Assessment of Wind Generators in the Czech Republic

Directory of Open Access Journals (Sweden)

Vladimír Lapčík

2008-11-01

Full Text Available The article summarizes author´s experience with environmental impact assessment in branch of wind generators. The introductorypart of paper describes legislative obligations of the Czech Republic in frame of fulfilling the European Union´s limits in branch ofrenewable energy resources utilization. Next part of paper deals with analysis of impacts of wind generators on the environment.The final part of paper deals with experience with implementation of the environmental impact assessment process (pursuant to the ActNo. 100/2001 Coll. in the field of wind power in the Czech Republic.

International Conference on Solar Concentrators for the Generation of Electricity or Hydrogen: Book of Abstracts

Energy Technology Data Exchange (ETDEWEB)

McConnell, R.; Symko-Davies, M.; Hayden, H.

2005-05-01

The International Conference on Solar Concentrators for the Generation of Electricity or Hydrogen provides an opportunity to learn about current significant research on solar concentrators for generating electricity or hydrogen. The conference will emphasize in-depth technical discussions of recent achievements in technologies that convert concentrated solar radiation to electricity or hydrogen, with primary emphasis on photovoltaic (PV) technologies. Very high-efficiency solar cells--above 37%--were recently developed, and are now widely used for powering satellites. This development demands that we take a fresh look at the potential of solar concentrators for generating low-cost electricity or hydrogen. Solar electric concentrators could dramatically overtake other PV technologies in the electric utility marketplace because of the low capital cost of concentrator manufacturing facilities and the larger module size of concentrators. Concentrating solar energy also has advantages for th e solar generation of hydrogen. Around the world, researchers and engineers are developing solar concentrator technologies for entry into the electricity generation market and several have explored the use of concentrators for hydrogen production. The last conference on the subject of solar electric concentrators was held in November of 2003 and proved to be an important opportunity for researchers and developers to share new and crucial information that is helping to stimulate projects in their countries.

Environmental compliance audits of electric generating facilities - a practical approach

International Nuclear Information System (INIS)

Staker, R.D.

1992-01-01

As environmental regulations expand in complexity and number, and as regulatory agencies place more emphasis on enforcing regulations, it is increasingly important that electric utilities perform periodic environmental compliance audits to determine if their facilities are in compliance with federal, state, and local environmental regulations. Explicit commitment by the utility's top management and careful planning and execution of an audit are key elements in the effectiveness of an audit. This paper is directed to electric utility environmental managers and company management. The paper presents a practical approach for planning and performing a multi-media environmental compliance of an electric generating facility

A versatile generator of nanoparticle aerosols. A novel tool in environmental and occupational exposure assessment.

Science.gov (United States)

Clemente, Alberto; Lobera, M Pilar; Balas, Francisco; Santamaria, Jesus

2018-06-01

The increasing presence of nanotechnology on the market entails a growing probability of finding ENMs in the environment. Nanoparticles aerosols are a yet unknown risk for human and environmental exposure that may normally occur at any point during the nanomaterial lifecycle. There is a research gap in standardized methods to assess the exposure to airborne nanoparticles in different environments. The controllable generation of nanoparticle aerosols has long been a challenging objective for researchers and industries dealing with airborne nanoparticles. In this work, a versatile system to generate nanoparticulate aerosols has been designed. The system allows the production of both i) instantaneous nanoparticle clouds and ii) continuous nanoparticle streams with quasi-stable values of particle concentration and size distribution. This novel device uses a compressed-air pressure pulse to disperse the target material into either the testing environment (instantaneous cloud formation) or a secondary chamber, from which a continuous aerosol stream can be drawn, with a tunable nanoparticle concentration. The system is robust, highly versatile and easy to operate, enabling reproducible generation of aerosols from a variety of sources. The system has been verified with four dry nanomaterials: TiO 2 , ZnO, CuO and CNT bundles. Copyright © 2017 Elsevier B.V. All rights reserved.

Environmental radiological studies downstream from Rancho Seco Nuclear Power Generating Station

International Nuclear Information System (INIS)

Noshkin, V.E.; Wong, K.M.; Eagle, R.J.; Dawson, J.W.; Brunk, J.L.; Jokela, T.A.

1985-01-01

This report summarizes the information compiled in 1984 while assessing the environmental impact of radionuclides in aquatic releases from the Rancho Seco Nuclear Power Generating Station. Gamma-emitting radionuclides discharged since 1981 are found in many of the dietary components derived from the creeks receiving the effluent wastewater. Some soils and crops are found to contain radionuclides that originate from the contaminated water that was transferred to land during the irrigation season. 134 Cs and 137 Cs are the primary gamma-emitting radionuclides detected in the edible flesh of fish from the creeks. Concentrations in the flesh of fish decreased exponentially with distance from the plant. No significant differences in the 137 Cs activity were found between male and female fish of equal size, but concentrations may vary in fish of different size, with the season and diet. 21% of the total 137 Cs and 134 Cs discharged between 1981 and 1984 is associated with the creek sediments to a distance of 27 km from the plant. Fractions of the missing inventory have been transferred to land during the irrigation season or to downstream regions more distant than 27 km from the plant. The radiocesium content of the sediments in 1984 decreased significantly in a downstream direction, much in the same manner as concentrations decreased in fish. Radioactivity originating from the plant was not above detection limits in any terrestrial food item sampled beyond 6.5 km from the plant. Based on the usage factors provided by individuals interviewed in a 1984 survey, the fish and aquatic-organism ingestion pathway contributed the largest radiological dose to humans utilizing products contaminated with the radionuclides in the liquid wastes discharged from the Rancho Seco Nuclear Power Generating Station in 1984

Environmental concentrations of fibers with fluoro-edenitic composition and population exposure in Biancavilla (Sicily, Italy

Directory of Open Access Journals (Sweden)

Biagio Maria Bruni

2014-06-01

Full Text Available INTRODUCTION. The town of Biancavilla (Sicily was included in the National Priorities List of Contaminated Sites due to environmental dispersion of amphibole fibers owing to the extraction of materials from a local quarry. The present report summarizes results from several, hitherto unpublished, environmental surveys carried out in the area, as well as from published analyses of the chemistry and composition of fibers. METHODS. Data included here comprises environmental fiber concentrations by scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS analysis in soil, indoor and outdoor air, personal monitoring, as well as a chemical characterization of the fibers. The full chemical structure and spectroscopic characterization of fibers were obtained through a multi-analytical approach: SEM-EDS, X-ray powder diffraction (XRPD, as well as Mössbauer (MS and Fourier transform infrared (FT-IR spectroscopies. RESULTS. Data analyzed provided a spatial and temporal picture of fiber concentrations in Biancavilla, and a qualitative assessment of population exposure. Results suggest that until 2000, the population had been exposed to high levels of amphibole fibers. Mitigation measures adopted since 2001, gradually reduced exposure levels to about 0.10.4 ff/l. Previous studies on fibrous amphiboles from Biancavilla reported considerable chemical variability. Differences in composition, especially concerning the presence of Si, Ca, Fe, and Na, were found both within and between samples. Compared to the previously investigated prismatic fluoro-edenite, these fibrous fluorine amphiboles consistently showed higher average values of Si and Fe content, whereas Ca was significantly lower, which we consider a distinctive characteristic of the fluorine fibrous variety. CONCLUSIONS. The population of Biancavilla had been highly exposed to a suite of fibrous amphiboles for over 50 years. Dust mitigation measures have gradually reduced exposure, but

Fallout Concentration Various Environmental Samples in Indonesia

International Nuclear Information System (INIS)

Sutarman

2001-01-01

The testing of nuclear weapons have been carried out by the advanced countries, such as United States, Russian Federation, United Kingdom, France, China, India and Pakistan, since about 1945 until 1998. Nuclear weapons tests were conducted at various locations, on and above the earth's surface or underground or on and under the ocean's surface. Nuclear explosions caused the radionuclides of fission product, such as 131 l, 89 Sr, 90 Sr, 134 Cs, 137 Cs, and 239 Pu released to the atmospheric layer. In the atmospheric layer, the long-lived radionuclides, i.e, 90 Sr dan 137 Cs will be distributed into the environment as the fallout radionuclides, and deposited in the various environmental samples (soil, water, and biota). In general, at several locations in Indonesia the 90 Sr and 137 Cs in the various environmental samples still can be detected. The data of measurement results of 90 Sr and 137 Cs concentrations were generally lower than that from some countries in the northern hemisphere. (author)

The Environmental Scenario Generator (ESG: a distributed environmental data archive analysis tool

Directory of Open Access Journals (Sweden)

E A Kihn

2006-01-01

Full Text Available The Environmental Scenario Generator (ESG is a network distributed software system designed to allow a user to interact with archives of environmental data for the purpose of scenario extraction, data analysis and integration with existing models that require environmental input. The ESG uses fuzzy-logic based search tools to allow a user to look for specific environmental scenarios in vast archives by specifying the search in human linguistic terms. For example, the user can specify a scenario such as a "cloud free week" or "high winds and low pressure" and then search relevant archives available across the network to get a list of matching events. The ESG hooks to existing archives of data by providing a simple communication framework and an efficient data model for exchanging data. Once data has been delivered by the distributed archives in the ESG data model, it can easily be accessed by the visualization, integration and analysis components to meet specific user requests. The ESG implementation provides a framework which can be taken as a pattern applicable to other distributed archive systems.

Concentrations of antibiotics predicted to select for resistant bacteria: Proposed limits for environmental regulation.

Science.gov (United States)

Bengtsson-Palme, Johan; Larsson, D G Joakim

2016-01-01

There are concerns that selection pressure from antibiotics in the environment may accelerate the evolution and dissemination of antibiotic-resistant pathogens. Nevertheless, there is currently no regulatory system that takes such risks into account. In part, this is due to limited knowledge of environmental concentrations that might exert selection for resistant bacteria. To experimentally determine minimal selective concentrations in complex microbial ecosystems for all antibiotics would involve considerable effort. In this work, our aim was to estimate upper boundaries for selective concentrations for all common antibiotics, based on the assumption that selective concentrations a priori need to be lower than those completely inhibiting growth. Data on Minimal Inhibitory Concentrations (MICs) were obtained for 111 antibiotics from the public EUCAST database. The 1% lowest observed MICs were identified, and to compensate for limited species coverage, predicted lowest MICs adjusted for the number of tested species were extrapolated through modeling. Predicted No Effect Concentrations (PNECs) for resistance selection were then assessed using an assessment factor of 10 to account for differences between MICs and minimal selective concentrations. The resulting PNECs ranged from 8 ng/L to 64 μg/L. Furthermore, the link between taxonomic similarity between species and lowest MIC was weak. This work provides estimated upper boundaries for selective concentrations (lowest MICs) and PNECs for resistance selection for all common antibiotics. In most cases, PNECs for selection of resistance were below available PNECs for ecotoxicological effects. The generated PNECs can guide implementation of compound-specific emission limits that take into account risks for resistance promotion. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Parental Concern about Environmental Chemical Exposures and Children's Urinary Concentrations of Phthalates and Phenols.

Science.gov (United States)

Pell, Tripler; Eliot, Melissa; Chen, Aimin; Lanphear, Bruce P; Yolton, Kimberly; Sathyanarayana, Sheela; Braun, Joseph M

2017-07-01

To examine whether parents' concerns about environmental chemical exposures were associated with urinary phthalate and phenol concentrations in their school-age children. In a prospective cohort of 218 mother-child pairs from Cincinnati, Ohio (2010-2014), we measured 11 phthalate metabolites and 5 phenols in urine samples when children were age 8 years and used questionnaire data from caregivers. We estimated the covariate-adjusted percent difference in phthalates and phenols among children of parents who expressed concern about environmental chemical exposures compared with children whose parents did not. Concentrations of 4 phthalates, bisphenol S, and bisphenol A were lower among children whose parents expressed concern about environmental chemicals (n = 122) compared with those who did not (n = 96). Di-2-ethylhexyl phthalate metabolites, bisphenol S, and bisphenol A concentrations were 23% (95% CI -38, -5), 37% (95% CI -49, -21), and 13% (95% CI -26, 3) lower, respectively, among children whose parents expressed concern compared with those whose parents did not. Triclosan concentrations were 35% greater (95% CI -2, 87) among children whose parents expressed concern compared with children whose parents did not. Parental concern about environmental chemicals was associated with lower childhood urine concentrations of several phthalates and phenols; unexpectedly, parental concern was associated with greater triclosan concentrations. These results suggest that parental concern may be an important factor in mitigating children's phthalate and phenol exposures. Copyright © 2017 Elsevier Inc. All rights reserved.

Evaluation of environmental filtration control of engineered nanoparticles using the Harvard Versatile Engineered Nanomaterial Generation System (VENGES)

Science.gov (United States)

Echevarría-Vega, Manuel E.; Sotiriou, Georgios A.; Santeufemio, Christopher; Schmidt, Daniel; Demokritou, Philip; Ellenbecker, Michael

2013-01-01

Applying engineering controls to airborne engineered nanoparticles (ENPs) is critical to prevent environmental releases and worker exposure. This study evaluated the effectiveness of two air sampling and six air cleaning fabric filters at collecting ENPs using industrially relevant flame-made engineered nanoparticles generated using a versatile engineered nanomaterial generation system (VENGES), recently designed and constructed at Harvard University. VENGES has the ability to generate metal and metal oxide exposure atmospheres while controlling important particle properties such as primary particle size, aerosol size distribution, and agglomeration state. For this study, amorphous SiO2 ENPs with a 15.4 nm primary particle size were generated and diluted with HEPA-filtered air. The aerosol was passed through the filter samples at two different filtration face velocities (2.3 and 3.5 m/min). Particle concentrations as a function of particle size were measured upstream and downstream of the filters using a specially designed filter test system to evaluate filtration efficiency. Real time instruments (FMPS and APS) were used to measure particle concentration for diameters from 5 to 20,000 nm. Membrane-coated fabric filters were found to have enhanced nanoparticle collection efficiency by 20–46 % points compared to non-coated fabric and could provide collection efficiency above 95 %. PMID:23412707

Evaluation of environmental filtration control of engineered nanoparticles using the Harvard Versatile Engineered Nanomaterial Generation System (VENGES)

International Nuclear Information System (INIS)

Tsai, Candace S.-J.; Echevarría-Vega, Manuel E.; Sotiriou, Georgios A.; Santeufemio, Christopher; Schmidt, Daniel; Demokritou, Philip; Ellenbecker, Michael

2012-01-01

Applying engineering controls to airborne engineered nanoparticles (ENPs) is critical to prevent environmental releases and worker exposure. This study evaluated the effectiveness of two air sampling and six air cleaning fabric filters at collecting ENPs using industrially relevant flame-made engineered nanoparticles generated using a versatile engineered nanomaterial generation system (VENGES), recently designed and constructed at Harvard University. VENGES has the ability to generate metal and metal oxide exposure atmospheres while controlling important particle properties such as primary particle size, aerosol size distribution, and agglomeration state. For this study, amorphous SiO 2 ENPs with a 15.4 nm primary particle size were generated and diluted with HEPA-filtered air. The aerosol was passed through the filter samples at two different filtration face velocities (2.3 and 3.5 m/min). Particle concentrations as a function of particle size were measured upstream and downstream of the filters using a specially designed filter test system to evaluate filtration efficiency. Real time instruments (FMPS and APS) were used to measure particle concentration for diameters from 5 to 20,000 nm. Membrane-coated fabric filters were found to have enhanced nanoparticle collection efficiency by 20–46 % points compared to non-coated fabric and could provide collection efficiency above 95%.

Environmental and other considerations in development of new nuclear power generation

International Nuclear Information System (INIS)

Wan, P.K.

2005-01-01

Power generation is well recognized as a major prerequisite for a country's economic development. When developing a new nuclear power project, major environmental issues range from understanding of the environmental regulations of the country where the project is going to be built and the policies of the financial institution(s) involved, to dealing with the logistical issues associated with the acquisition of in country consultants, and language and cultural differences in producing the required environmental documents. One of the important pre-construction environmental efforts for nuclear power project is preparation of an Environmental Impact Assessment (EIA). An EIA is typically required to be performed for both the host country and the financial institutions engaged. The primary issues addressed in the EIA prepared for the country and that prepared for the bank are not necessarily the same, nor are the level of analyses likely to be conducted for a given environmental topic. The consequences for the development of a nuclear power project can be far-reaching, since the proposed project has the potential to cause significant socioeconomic impacts on local population and government, if it is not properly sited and/or designed. Thus, many of the financial institutions (such as the World Bank) require environmental and social-economic impact assessments as pre-requisite for funding approval. In addition, sustainable development objectives must be identified and fulfilled to alleviate the risks associated with project go-ahead decision. This paper addresses environmental and other considerations in development of nuclear power generation systems under an electric power industry privatization environment. Case studies of recent permitting activities for new nuclear power generation projects in the United States and funding issues for a nuclear power plant recently built in China are also discussed. (authors)

Sowing Seeds for Future Generations: Development of Generative Concern and Its Relation to Environmental Narrative Identity

Science.gov (United States)

Jia, Fanli; Soucie, Kendall; Alisat, Susan; Pratt, Michael

2016-01-01

In this longitudinal study, we examined the relationship between the trajectory of generative concern measured at ages 23, 26 and 32 and environmental narrative identity at age 32. Canadian participants completed a questionnaire on generative concern at ages 23, 26 and 32 and were then interviewed about their personal experiences with the…

Condition-Based Maintenance Strategy for Production Systems Generating Environmental Damage

Directory of Open Access Journals (Sweden)

L. Tlili

2015-01-01

Full Text Available We consider production systems which generate damage to environment as they get older and degrade. The system is submitted to inspections to assess the generated environmental damage. The inspections can be periodic or nonperiodic. In case an inspection reveals that the environmental degradation level has exceeded the critical level U, the system is considered in an advanced deterioration state and will have generated significant environmental damage. A corrective maintenance action is then performed to renew the system and clean the environment and a penalty has to be paid. In order to prevent such an undesirable situation, a lower threshold level L is considered to trigger a preventive maintenance action to bring back the system to a state as good as new at a lower cost and without paying the penalty. Two inspection policies are considered (periodic and nonperiodic. For each one of them, a mathematical model and a numerical procedure are developed to determine simultaneously the preventive maintenance (PM threshold L∗ and the inspection sequence which minimize the average long-run cost per time unit. Numerical calculations are performed to illustrate the proposed maintenance policies and highlight their main characteristics with respect to relevant input parameters.

Behavior toxicity to Caenorhabditis elegans transferred to the progeny after exposure to sulfamethoxazole at environmentally relevant concentrations

Institute of Scientific and Technical Information of China (English)

Zhenyang Yu; Lei Jiang; Daqiang Yin

2011-01-01

Sulfamethoxazole (SMX) is one of the most common detected antibiotics in the environment. In order to study whether SMX can affect behavior and growth and whether these effects could be transferred to the progeny, Caenorhabditis elegans was exposed at environmentally relevant concentrations for 24, 48, 72 and 96 hr, respectively. After exposure, the exposed parent generation (Po) was measured for behavior and growth indicators, which were presented as percentage of controls (POC). Then their corresponding unexposed progeny (F1) was separated and measured for the same indicators. The lowest POC for Po after 96 hr-exposure at 100 mg/L were 37.8％, 12.7％, 45.8％ and 70.1％ for body bending frequency (BBF), reversal movement (RM), Omega turns (OT) and body length (BL), respectively. And F1 suffered defects with the lowest POC as 55.8％, 24.1％, 48.5％ and 60.7％ for BBF, RM, OT and BL, respectively. Defects in both Po and F1 showed a time- and concentration-dependent fashion and behavior indicators showed better sensitivity than growth indicator. The observed effects on F1 demonstrated the transferable properties of SMX. Defects of SMX at environmental concentrations suggested that it is necessary to perform further systematical studies on its ecological risk in actual conditions.

Analysis of the environmental impact generated by nuclear activities

International Nuclear Information System (INIS)

Lazar, Roxana Elena; Dumitrescu, Maria

2000-01-01

Assessment of environmental impact represents one of the most formalized examples of interdisciplinary approach. After more then a century from the introduction of the concept of environmental impact assessment, this undertaking still represents an amalgamation of mini-studies based on pre-determined approaches rather than a genuine integrated document. This work presents the most important and adequate techniques of analysis of environmental impact generated by nuclear activities starting from identification of the events causing negative effects upon environment (by using checking list, the matrices and the cause-effect diagram) and radiation dose determination up to the decision making process. To preserve environment integrity the human factor should be re-evaluated as well as its active participation in formation and settling of an real environmental culture

High-performance flat-panel solar thermoelectric generators with high thermal concentration

Science.gov (United States)

Kraemer, Daniel; Poudel, Bed; Feng, Hsien-Ping; Caylor, J. Christopher; Yu, Bo; Yan, Xiao; Ma, Yi; Wang, Xiaowei; Wang, Dezhi; Muto, Andrew; McEnaney, Kenneth; Chiesa, Matteo; Ren, Zhifeng; Chen, Gang

2011-07-01

The conversion of sunlight into electricity has been dominated by photovoltaic and solar thermal power generation. Photovoltaic cells are deployed widely, mostly as flat panels, whereas solar thermal electricity generation relying on optical concentrators and mechanical heat engines is only seen in large-scale power plants. Here we demonstrate a promising flat-panel solar thermal to electric power conversion technology based on the Seebeck effect and high thermal concentration, thus enabling wider applications. The developed solar thermoelectric generators (STEGs) achieved a peak efficiency of 4.6% under AM1.5G (1 kW m-2) conditions. The efficiency is 7-8 times higher than the previously reported best value for a flat-panel STEG, and is enabled by the use of high-performance nanostructured thermoelectric materials and spectrally-selective solar absorbers in an innovative design that exploits high thermal concentration in an evacuated environment. Our work opens up a promising new approach which has the potential to achieve cost-effective conversion of solar energy into electricity.

High-performance flat-panel solar thermoelectric generators with high thermal concentration.

Science.gov (United States)

Kraemer, Daniel; Poudel, Bed; Feng, Hsien-Ping; Caylor, J Christopher; Yu, Bo; Yan, Xiao; Ma, Yi; Wang, Xiaowei; Wang, Dezhi; Muto, Andrew; McEnaney, Kenneth; Chiesa, Matteo; Ren, Zhifeng; Chen, Gang

2011-05-01

The conversion of sunlight into electricity has been dominated by photovoltaic and solar thermal power generation. Photovoltaic cells are deployed widely, mostly as flat panels, whereas solar thermal electricity generation relying on optical concentrators and mechanical heat engines is only seen in large-scale power plants. Here we demonstrate a promising flat-panel solar thermal to electric power conversion technology based on the Seebeck effect and high thermal concentration, thus enabling wider applications. The developed solar thermoelectric generators (STEGs) achieved a peak efficiency of 4.6% under AM1.5G (1 kW m(-2)) conditions. The efficiency is 7-8 times higher than the previously reported best value for a flat-panel STEG, and is enabled by the use of high-performance nanostructured thermoelectric materials and spectrally-selective solar absorbers in an innovative design that exploits high thermal concentration in an evacuated environment. Our work opens up a promising new approach which has the potential to achieve cost-effective conversion of solar energy into electricity. © 2011 Macmillan Publishers Limited. All rights reserved

Hybrid neuro-fuzzy system for power generation control with environmental constraints

International Nuclear Information System (INIS)

Chaturvedi, Krishna Teerth; Pandit, Manjaree; Srivastava, Laxmi

2008-01-01

The real time controls at the central energy management centre in a power system, continuously track the load changes and endeavor to match the total power demand with total generation in such a manner that the operating cost is least. However due to the strict government regulations on environmental protection, operation at minimum cost is no longer the only criterion for dispatching electrical power. The idea behind the environmentally constrained combined economic dispatch formulation is to estimate the optimal generation allocation to generating units in such a manner that fuel cost and harmful emission levels are both simultaneously minimized for a given load demand. Conventional optimization techniques are cumbersome for such complex optimization tasks and are not suitable for on-line use due to increased computational burden. This paper proposes a neuro-fuzzy power dispatch method where the uncertainty involved with power demand is modeled as a fuzzy variable. Then Levenberg-Marquardt neural network (LMNN) is used to evaluate the optimal generation schedules. This model trains almost hundred times faster that the popular BP neural network. The proposed method has been tested on two test systems and found to be suitable for on-line combined environmental economic dispatch

Generation of tunable and pulsatile concentration gradients via microfluidic network

KAUST Repository

Zhou, Bingpu

2014-06-04

We demonstrate a compact Polydimethylsiloxane microfluidic chip which can quickly generate ten different chemical concentrations simultaneously. The concentration magnitude of each branch can be flexibly regulated based on the flow rate ratios of the two injecting streams. The temporal/pulsatile concentration gradients are achieved by integrating on-chip pneumatic actuated valves controlled by the external signals. The temporal concentration gradients can also be tuned precisely by varying applied frequency and duty cycle of the trigger signal. It is believed that such microdevice will be potentially used for some application areas of producing stable chemical gradients as well as allowing fast, pulsatile gradient transformation in seconds.

The influence of biological and environmental factors on metallothionein concentration in the blood.

Science.gov (United States)

Kowalska, Katarzyna; Bizoń, Anna; Zalewska, Marta; Milnerowicz, Halina

2015-01-01

The concentration of metallothionein (MT), a low-molecular-weight protein, is regulated by many factors, primarily metals (zinc, cadmium, copper), cytokines, glucocorticoides and free radicals. These factors are determined by such aspects of human biology as gender, pregnancy and age, as well as by environmental factors including the use of oral contraceptives and cigarette smoking, all which may affect MT levels in the body. The aim of this study was to investigate the influence of these biological and environmental factors on MT concentrations in erythrocyte lysate and in plasma. MT concentrations were determined by a two-step direct enzyme-linked immunosorbent assay. Evaluation of exposure to cigarette smoking was performed by checking cotinine levels in the plasma of subjects. The studies showed higher MT concentrations in both the erythrocyte lysate and plasma of women when compared to men. Furthermore, pregnancy causes an increase of MT concentration in plasma, while oral contraceptives cause an elevated concentration of MT in erythrocyte lysate. Age impacts plasma MT concentrations in men, whereas it does not affect concentrations of MT in erythrocyte lysate. Copyright © 2014 Elsevier GmbH. All rights reserved.

Impact of financial institution environmental guidelines on international power generation projects

International Nuclear Information System (INIS)

Macak, J.J. III; Schott, G.A.

1995-01-01

Where financing is concerned, two major players for US based international power projects are The World Bank and the Export-Import Bank of the US (Ex-Im Bank). The concern for environmental protection is a global issue, yet many countries still have no enforceable environmental regulations for power generation facilities. In the past, many projects were developed with little or no environmental controls. However, designing a power generation project to meet The World Bank environmental guidelines is now generally regarded as standard practice for independent power projects in the developing world (Price et al, 1994). The World Bank standards are mandatory for projects financed by The World Bank, through the International Finance Corporation (IFC), or associated programs like the Expanded Cofinancing Program of the International Bank for Reconstruction and Development (IBRD). The Ex-Im Bank has recently established new environmental procedures and guidelines that went into effect on February 1, 1995. In order to avoid a competitive disadvantage for US exporters and still provide a means for global environmental protection, Ex-Im Bank has taken a leadership role in encouraging the adoption of common environmental procedures and standards by leading export credit agencies around the world. Until such procedures are established, Ex-Im Bank is seeking to establish common lines in specific cases with the Organization for Economic Cooperation and Development (OECD) on environmental standards for appropriate projects (Ex-Im, 1994)

Climate change and environmental concentrations of POPs: A review

International Nuclear Information System (INIS)

Nadal, Martí; Marquès, Montse; Mari, Montse; Domingo, José L.

2015-01-01

In recent years, the climate change impact on the concentrations of persistent organic pollutants (POPs) has become a topic of notable concern. Changes in environmental conditions such as the increase of the average temperature, or the UV-B radiation, are likely to influence the fate and behavior of POPs, ultimately affecting human exposure. The state of the art of the impact of climate change on environmental concentrations of POPs, as well as on human health risks, is here reviewed. Research gaps are also identified, while future studies are suggested. Climate change and POPs are a hot issue, for which wide attention should be paid not only by scientists, but also and mainly by policy makers. Most studies reported in the scientific literature are focused on legacy POPs, mainly polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and pesticides. However, the number of investigations aimed at estimating the impact of climate change on the environmental levels of polycyclic aromatic hydrocarbons (PAHs) is scarce, despite of the fact that exposure to PAHs and photodegradation byproducts may result in adverse health effects. Furthermore, no data on emerging POPs are currently available in the scientific literature. In consequence, an intensification of studies to identify and mitigate the indirect effects of the climate change on POP fate is needed to minimize the human health impact. Furthermore, being this a global problem, interactions between climate change and POPs must be addressed from an international perspective.

Climate change and environmental concentrations of POPs: A review

Energy Technology Data Exchange (ETDEWEB)

Nadal, Martí, E-mail: marti.nadal@urv.cat [Laboratory of Toxicology and Environmental Health, School of Medicine, IISPV, Universitat Rovira i Virgili, Sant Llorenç 21, 43201 Reus, Catalonia (Spain); Marquès, Montse; Mari, Montse [Laboratory of Toxicology and Environmental Health, School of Medicine, IISPV, Universitat Rovira i Virgili, Sant Llorenç 21, 43201 Reus, Catalonia (Spain); Environmental Engineering Laboratory, Departament d’Enginyeria Quimica, Universitat Rovira i Virgili, Avinguda Països Catalans 26, 43007 Tarragona, Catalonia (Spain); Domingo, José L. [Laboratory of Toxicology and Environmental Health, School of Medicine, IISPV, Universitat Rovira i Virgili, Sant Llorenç 21, 43201 Reus, Catalonia (Spain)

2015-11-15

In recent years, the climate change impact on the concentrations of persistent organic pollutants (POPs) has become a topic of notable concern. Changes in environmental conditions such as the increase of the average temperature, or the UV-B radiation, are likely to influence the fate and behavior of POPs, ultimately affecting human exposure. The state of the art of the impact of climate change on environmental concentrations of POPs, as well as on human health risks, is here reviewed. Research gaps are also identified, while future studies are suggested. Climate change and POPs are a hot issue, for which wide attention should be paid not only by scientists, but also and mainly by policy makers. Most studies reported in the scientific literature are focused on legacy POPs, mainly polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and pesticides. However, the number of investigations aimed at estimating the impact of climate change on the environmental levels of polycyclic aromatic hydrocarbons (PAHs) is scarce, despite of the fact that exposure to PAHs and photodegradation byproducts may result in adverse health effects. Furthermore, no data on emerging POPs are currently available in the scientific literature. In consequence, an intensification of studies to identify and mitigate the indirect effects of the climate change on POP fate is needed to minimize the human health impact. Furthermore, being this a global problem, interactions between climate change and POPs must be addressed from an international perspective.

Maternal exposure to carbamazepine at environmental concentrations can cross intestinal and placental barriers

Energy Technology Data Exchange (ETDEWEB)

Kaushik, Gaurav, E-mail: kausgaur@isu.edu [Department of Biological Sciences, Idaho State University, Stop 8007, 921 S 8th Ave, Pocatello, ID 83209-8007 (United States); Department of Medical Pathology and Laboratory Medicine, University of California at Davis, Davis, CA 95817 (United States); Institute for Pediatric Regenerative Medicine, Shriners Hospitals for Children, Northern California, 2425 Stockton Boulevard, Sacramento, CA 95817 (United States); Huber, David P., E-mail: hubedavi@isu.edu [Department of Biological Sciences, Idaho State University, Stop 8007, 921 S 8th Ave, Pocatello, ID 83209-8007 (United States); Aho, Ken, E-mail: ahoken@isu.edu [Department of Biological Sciences, Idaho State University, Stop 8007, 921 S 8th Ave, Pocatello, ID 83209-8007 (United States); Finney, Bruce, E-mail: finney@isu.edu [Department of Biological Sciences, Idaho State University, Stop 8007, 921 S 8th Ave, Pocatello, ID 83209-8007 (United States); Bearden, Shawn, E-mail: bearshaw@isu.edu [Department of Biological Sciences, Idaho State University, Stop 8007, 921 S 8th Ave, Pocatello, ID 83209-8007 (United States); Zarbalis, Konstantinos S., E-mail: kzarbalis@ucdavis.edu [Department of Medical Pathology and Laboratory Medicine, University of California at Davis, Davis, CA 95817 (United States); Institute for Pediatric Regenerative Medicine, Shriners Hospitals for Children, Northern California, 2425 Stockton Boulevard, Sacramento, CA 95817 (United States); Thomas, Michael A., E-mail: mthomas@isu.edu [Department of Biological Sciences, Idaho State University, Stop 8007, 921 S 8th Ave, Pocatello, ID 83209-8007 (United States)

2016-05-27

Psychoactive pharmaceuticals have been found as teratogens at clinical dosage during pregnancy. These pharmaceuticals have also been detected in minute (ppb) concentrations in drinking water in the US, and are environmental contaminants that may be complicit in triggering neurological disorders in genetically susceptible individuals. Previous studies have determined that psychoactive pharmaceuticals (fluoxetine, venlafaxine and carbamazepine) at environmentally relevant concentrations enriched sets of genes regulating development and function of the nervous system in fathead minnows. Altered gene sets were also associated with potential neurological disorders, including autism spectrum disorders (ASD). Subsequent in vitro studies indicated that psychoactive pharmaceuticals altered ASD-associated synaptic protein expression and gene expression in human neuronal cells. However, it is unknown if environmentally relevant concentrations of these pharmaceuticals are able to cross biological barriers from mother to fetus, thus potentially posing risks to nervous system development. The main objective of this study was to test whether psychoactive pharmaceuticals (fluoxetine, venlafaxine, and carbamazepine) administered through the drinking water at environmental concentrations to pregnant mice could reach the brain of the developing embryo by crossing intestinal and placental barriers. We addressed this question by adding {sup 2}H-isotope labeled pharmaceuticals to the drinking water of female mice for 20 days (10 pre-and 10 post–conception days), and quantifying {sup 2}H-isotope enrichment signals in the dam liver and brain of developing embryos using isotope ratio mass spectrometry. Significant levels of {sup 2}H enrichment was detected in the brain of embryos and livers of carbamazepine-treated mice but not in those of control dams, or for fluoxetine or venlafaxine application. These results provide the first evidence that carbamazepine in drinking water and at

Maternal exposure to carbamazepine at environmental concentrations can cross intestinal and placental barriers

International Nuclear Information System (INIS)

Kaushik, Gaurav; Huber, David P.; Aho, Ken; Finney, Bruce; Bearden, Shawn; Zarbalis, Konstantinos S.; Thomas, Michael A.

2016-01-01

Psychoactive pharmaceuticals have been found as teratogens at clinical dosage during pregnancy. These pharmaceuticals have also been detected in minute (ppb) concentrations in drinking water in the US, and are environmental contaminants that may be complicit in triggering neurological disorders in genetically susceptible individuals. Previous studies have determined that psychoactive pharmaceuticals (fluoxetine, venlafaxine and carbamazepine) at environmentally relevant concentrations enriched sets of genes regulating development and function of the nervous system in fathead minnows. Altered gene sets were also associated with potential neurological disorders, including autism spectrum disorders (ASD). Subsequent in vitro studies indicated that psychoactive pharmaceuticals altered ASD-associated synaptic protein expression and gene expression in human neuronal cells. However, it is unknown if environmentally relevant concentrations of these pharmaceuticals are able to cross biological barriers from mother to fetus, thus potentially posing risks to nervous system development. The main objective of this study was to test whether psychoactive pharmaceuticals (fluoxetine, venlafaxine, and carbamazepine) administered through the drinking water at environmental concentrations to pregnant mice could reach the brain of the developing embryo by crossing intestinal and placental barriers. We addressed this question by adding "2H-isotope labeled pharmaceuticals to the drinking water of female mice for 20 days (10 pre-and 10 post–conception days), and quantifying "2H-isotope enrichment signals in the dam liver and brain of developing embryos using isotope ratio mass spectrometry. Significant levels of "2H enrichment was detected in the brain of embryos and livers of carbamazepine-treated mice but not in those of control dams, or for fluoxetine or venlafaxine application. These results provide the first evidence that carbamazepine in drinking water and at typical

A life cycle multi-objective economic and environmental assessment of distributed generation in buildings

International Nuclear Information System (INIS)

Safaei, Amir; Freire, Fausto; Henggeler Antunes, Carlos

2015-01-01

Highlights: • A lifecycle optimization model for distributed energy systems is developed. • Model estimates costs and environmental impacts of meeting the building energy demand. • Design and operating strategies to reduce costs and environmental impacts are discussed. • Pareto frontiers of costs vis-à-vis environmental impacts are presented. • Distributed generation can reduce the environmental impacts of the building sector. - Abstract: Distributed generation, namely cogeneration and solar technologies, is expected to play an important role in the future energy supply mix in buildings. This calls for a methodological framework to assess the economic and environmental performance of the building sector when such technologies are employed. A life-cycle model has been developed, combining distributed generation and conventional sources to calculate the cost and environmental impacts of meeting the building energy demand over a defined planning period. Three type of cogeneration technologies, solar photovoltaic and thermal, as well as conventional boilers along with the Portuguese electricity generation mix comprise the energy systems modeled. Pareto optimal frontiers are derived, showing the trade-offs between different types of impacts (non-renewable cumulative energy demand, greenhouse gas emissions, acidification, eutrophication) and cost to meet the energy demand of a commercial building. Our analysis shows that according to the objective to employ distributed generation (reducing cost or environmental impacts), a specific design and operational strategy for the energy systems shall be adopted. The strategies to minimize each type of impact and the associated cost trade-offs by exploring the solutions located on the Pareto optimal frontiers are discussed

Number concentrations of solid particles from the spinning top aerosol generator

International Nuclear Information System (INIS)

Mitchell, J.P.

1983-02-01

A spinning top aerosol generator has been used to generate monodisperse methylene blue particles in the size range from 0.6 to 6 μm. The number concentrations of these aerosols have been determined by means of an optical particle counter and compared with the equivalent measurements obtained by filter collection and microscopy. (author)

Climate change and environmental concentrations of POPs: A review.

Science.gov (United States)

Nadal, Martí; Marquès, Montse; Mari, Montse; Domingo, José L

2015-11-01

In recent years, the climate change impact on the concentrations of persistent organic pollutants (POPs) has become a topic of notable concern. Changes in environmental conditions such as the increase of the average temperature, or the UV-B radiation, are likely to influence the fate and behavior of POPs, ultimately affecting human exposure. The state of the art of the impact of climate change on environmental concentrations of POPs, as well as on human health risks, is here reviewed. Research gaps are also identified, while future studies are suggested. Climate change and POPs are a hot issue, for which wide attention should be paid not only by scientists, but also and mainly by policy makers. Most studies reported in the scientific literature are focused on legacy POPs, mainly polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and pesticides. However, the number of investigations aimed at estimating the impact of climate change on the environmental levels of polycyclic aromatic hydrocarbons (PAHs) is scarce, despite of the fact that exposure to PAHs and photodegradation byproducts may result in adverse health effects. Furthermore, no data on emerging POPs are currently available in the scientific literature. In consequence, an intensification of studies to identify and mitigate the indirect effects of the climate change on POP fate is needed to minimize the human health impact. Furthermore, being this a global problem, interactions between climate change and POPs must be addressed from an international perspective. Copyright © 2015 Elsevier Inc. All rights reserved.

Indoor air-assessment: Indoor concentrations of environmental carcinogens

International Nuclear Information System (INIS)

Gold, K.W.; Naugle, D.F.; Berry, M.A.

1991-01-01

In the report, indoor concentration data are presented for the following general categories of air pollutants: radon-222, environmental tobacco smoke (ETS), asbestos, gas phase organic compounds, formaldehyde, polycyclic aromatic hydrocarbons (PAH), pesticides, and inorganic compounds. These pollutants are either known or suspect carcinogens (i.e., radon-222, asbestos) or more complex mixtures or classes of compounds which contain known or suspect carcinogens. Concentration data for individual carcinogenic compounds in complex mixtures are usually far from complete. The data presented for complex mixtures often include compounds which are not carcinogenic or for which data are insufficient to evaluate carcinogenicity. Their inclusion is justified, however, by the possibility that further work may show them to be carcinogens, cocarcinogens, initiators or promotors, or that they may be employed as markers (e.g., nicotine, acrolein) for the estimation of exposure to complex mixtures

Environmental assessment of energy generation from agricultural and farm waste through anaerobic digestion.

Science.gov (United States)

Nayal, Figen Sisman; Mammadov, Aydin; Ciliz, Nilgun

2016-12-15

While Turkey is one of the world's largest producers and exporters of agricultural goods, it is also, at the same time a net importer of energy carriers. This dichotomy offers a strong incentive to generate energy from agricultural and farming waste; something which could provide energy security for rural areas. Combined with the enhanced energy security for farming areas, the production of energy in this manner could conceivably contribute to the overall national effort to reduce the Turkey's carbon footprint. This study explores the environmental benefits and burdens of one such option, that is, biogas production from a mixture of agricultural and animal waste through anaerobic digestion (AD), and its subsequent use for electricity and heat generation. A life-cycle assessment methodology was used, to measure the potential environmental impact of this option, in terms of global warming and total weighed impact, and to contrast it with the impact of producing the same amount of energy via an integrated gasification combined cycle process and a hard coal power plant. This study concentrates on an AD and cogeneration pilot plant, built in the Kocaeli province of Turkey and attempts to evaluate its potential environmental impacts. The study uses laboratory-scale studies, as well as literature and LCI databases to derive the operational parameters, yield and emissions of the plant. The potential impacts were calculated with EDIP 2003 methodology, using GaBi 5 LCA software. The results indicate that N 2 O emissions, resulting from the application of liquid and solid portions of digestate (a by-product of AD), as an organic fertilizer, are by far the largest contributors to global warming among all the life cycle stages. They constitute 68% of the total, whereas ammonia losses from the same process are the leading cause of terrestrial eutrophication. The photochemical ozone formation potential is significantly higher for the cogeneration phase, compared to other life

Effects of new environmental regulations on coal-fired generation

International Nuclear Information System (INIS)

LaCount, R.

1999-01-01

As restructuring of the electricity industry places downward pressure on power production costs, new environmental regulations are having the opposite effect. Although power plants may be subject to a variety of environmental regulations over the next ten years including reductions in mercury, toxics, and carbon dioxide, new regulations for sulfur dioxide (SO2) and nitrogen oxides (NOX) are poised to impact the electricity industry in the very short term. The cost for coal-fired power plants to comply with these new regulations has the potential to alter their competitive position. January 1, 2000 marks the beginning of Phase II for the Environmental Protection Agency's SO2 allowance market. Starting in January, all coal and oil plants above 25 MW will be required to comply with the federal SO2 provisions. Regulatory deadlines for NOX are also fast approaching; though the ultimate requirements are still subject to change. On May 1, 1999, a NOX allowance market began for states within the Northeast Ozone Transport Commission (OTC). A second phase of this program is scheduled to begin in 2003 that will lower the overall cap for allowable NOX emissions in the participating states. EPA is also working to expand the reach of regional NOX reductions in 2003 through its NOX SIP call. This program, which is currently subject to litigation, would require NOX reductions in 14 states outside of the OTC. A new study by Resource Data International (RDI), Coal-Fired Generation in Competitive Power Markets, assessed the potential impact that the new SO2 and NOX regulations may have on the competitiveness of coal-fired generation. Overall, the study shows that coal-fired generation will continue to grow despite significant environmental costs and competition from natural gas-fired units. The new environmental regulations have the effect of increasing the dispatch cost of coal-fired units from $0.65/MWh on average in the WSCC to $4.14/MWh on average in the MAAC region. The addition

Temporal stability of blood lead concentrations in adults exposed only to environmental lead

Energy Technology Data Exchange (ETDEWEB)

Delves, H T; Sherlock, J C; Quinn, M J

1984-08-01

The temporal stability of blood lead concentrations of 21 health adults (14 men and 7 women) exposed only to environmental lead was assessed by analysis of 253 blood specimens collected serially over periods from 7 to 11 months. The women had lower blood lead concentrations (mean 8.5, range 7.4-10.8 micrograms/100 ml) than did the men (mean 12.2, range 8.6-15.8 micrograms/100 ml). These are within the expected ranges for non-occupationally exposed persons. Blood lead concentrations in the serial specimens from both men and women changed very little over the study period, with standard deviations of less than 0.5 micrograms/100 ml for the majority of individual mean concentrations: for all except low subjects the standard deviations were less than 0.8 micrograms/100 ml. Two subjects showed significant changes in blood lead concentrations during the study. A temporary increase in oral lead intake was identified for one of these subjects. In the absence of substantial changes in lead exposure blood lead levels in adults are remarkably stable and for their environmental monitoring a single blood lead concentration is an excellent biological indicator.

Radionuclides concentration in marine environmental samples along the coast of Vietnam

International Nuclear Information System (INIS)

Nguyen Trong Ngo; Nguyen Thanh Binh; Nguyen Van Phuc; Le Nhu Sieu; Truong Y; Mai Thi Huong; Nguyen Thi Linh; Nguyen Mong Sinh; Phan Son Hai; Le Ngoc Chung; Dang Duc Nhan; Nguyen Quang Long; Nguyen Hao Quang; Tran Tuyet Mai

2009-01-01

Studies on radioactivity inventories in environmental samples are necessary as they will serve as baseline data for assessing any environmental impact usage of nuclear-based activities. Approximately 700 data on 238 U, 232 Th, 226 Ra, 90 Sr, 137 Cs, 239,240 Pu activity concentrations in 150 samples i.e. sea water, sediment, fish, mollusc, crustaceans, oyster and weeds samples collected from 7 various locations in Vietnam (Hai Phong, Nghe An, Khanh Hoa, Ninh Thuan, Binh Thuan, Vung Tau, Tien Giang) throughout 1999-2008 are summarised and presented in this paper. Generally, the levels of artificial radionuclides in the studied marine environmental samples are lower as compared to other Asia-Pacific countries while naturally occurred radionuclides activity concentrations obtained were found to be in accordance with respective data from other studies within Pacific region. The radionuclides bioaccumulation factors studied in Red laver and oyster were mostly found to be high; therefore, further reinvestigation should be done for these biota that will be used as bio-fingerprint indicators in monitoring the marine environment from nuclear-based pollutions. The data set obtained from this study is available to the Asia-Pacific Marine Radioactivity Database. (author)

Microfabricated Collector-Generator Electrode Sensor for Measuring Absolute pH and Oxygen Concentrations.

Science.gov (United States)

Dengler, Adam K; Wightman, R Mark; McCarty, Gregory S

2015-10-20

Fast-scan cyclic voltammetry (FSCV) has attracted attention for studying in vivo neurotransmission due to its subsecond temporal resolution, selectivity, and sensitivity. Traditional FSCV measurements use background subtraction to isolate changes in the local electrochemical environment, providing detailed information on fluctuations in the concentration of electroactive species. This background subtraction removes information about constant or slowly changing concentrations. However, determination of background concentrations is still important for understanding functioning brain tissue. For example, neural activity is known to consume oxygen and produce carbon dioxide which affects local levels of oxygen and pH. Here, we present a microfabricated microelectrode array which uses FSCV to detect the absolute levels of oxygen and pH in vitro. The sensor is a collector-generator electrode array with carbon microelectrodes spaced 5 μm apart. In this work, a periodic potential step is applied at the generator producing transient local changes in the electrochemical environment. The collector electrode continuously performs FSCV enabling these induced changes in concentration to be recorded with the sensitivity and selectivity of FSCV. A negative potential step applied at the generator produces a transient local pH shift at the collector. The generator-induced pH signal is detected using FSCV at the collector and correlated to absolute solution pH by postcalibration of the anodic peak position. In addition, in oxygenated solutions a negative potential step at the generator produces hydrogen peroxide by reducing oxygen. Hydrogen peroxide is detected with FSCV at the collector electrode, and the magnitude of the oxidative peak is proportional to absolute oxygen concentrations. Oxygen interference on the pH signal is minimal and can be accounted for with a postcalibration.

Platelet-rich fibrin: Evolution of a second-generation platelet concentrate

Directory of Open Access Journals (Sweden)

Sunitha Raja V

2008-01-01

Full Text Available Platelet-rich plasma (PRP is a platelet concentrate that has been used widely to accelerate soft-tissue and hard-tissue healing. The preparation of PRP has been described by several authors. Platelet-rich fibrin (PRF was first described by Choukroun et al. in France. It has been referred to as a second-generation platelet concentrate, which has been shown to have several advantages over traditionally prepared PRP. Its chief advantages include ease of preparation and lack of biochemical handling of blood, which makes this preparation strictly autologous. This article describes the evolution of this novel platelet concentrate, referred to as PRF.

Power generation from chemically cleaned coals: do environmental benefits of firing cleaner coal outweigh environmental burden of cleaning?

DEFF Research Database (Denmark)

Ryberg, Morten W.; Owsianiak, Mikolaj; Laurent, Alexis

2015-01-01

Power generation from high-ash coals is a niche technology for power generation, but coal cleaning is deemed necessary to avoid problems associated with low combustion efficiencies and to minimize environmental burdens associated with emissions of pollutants originating from ash. Here, chemical...... beneficiation of coals using acid and alkali–acid leaching procedures is evaluated as a potential coal cleaning technology employing life cycle assessment (LCA). Taking into account the environmental benefits from firing cleaner coal in pulverized coal power plants and the environmental burden of the cleaning...... itself, it is demonstrated that for a wide range of cleaning procedures and types of coal, chemical cleaning generally performs worse than combustion of the raw coals and physical cleaning using dense medium separation. These findings apply for many relevant impact categories, including climate change...

The influence of environmental variables on platelet concentration in horse platelet-rich plasma.

Science.gov (United States)

Rinnovati, Riccardo; Romagnoli, Noemi; Gentilini, Fabio; Lambertini, Carlotta; Spadari, Alessandro

2016-07-04

Platelet-rich plasma (PRP) commonly refers to blood products which contain a higher platelet (PLT) concentration as compared to normal plasma. Autologous PRP has been shown to be safe and effective in promoting the natural processes of soft tissue healing or reconstruction in humans and horses. Variability in PLT concentration has been observed in practice between PRP preparations from different patients or from the same individual under different conditions. A change in PLT concentration could modify PRP efficacy in routine applications. The aim of this study was to test the influence of environmental, individual and agonistic variables on the PLT concentration of PRP in horses. Six healthy Standardbred mares were exposed to six different variables with a one-week washout period between variables, and PRP was subsequently obtained from each horse. The variables were time of withdrawal during the day (morning/evening), hydration status (overhydration/dehydration) treatment with anti-inflammatory drugs and training periods on a treadmill. The platelet concentration was significantly higher in horses treated with a non-steroidal anti-inflammatory drug (P = 0.03). The leukocyte concentration increased 2-9 fold with respect to whole blood in the PRP which was obtained after exposure to all the variable considered. Environmental variation in platelet concentration should be taken into consideration during PRP preparation.

Fabrication Processes to Generate Concentration Gradients in Polymer Solar Cell Active Layers

Science.gov (United States)

Inaba, Shusei; Vohra, Varun

2017-01-01

Polymer solar cells (PSCs) are considered as one of the most promising low-cost alternatives for renewable energy production with devices now reaching power conversion efficiencies (PCEs) above the milestone value of 10%. These enhanced performances were achieved by developing new electron-donor (ED) and electron-acceptor (EA) materials as well as finding the adequate morphologies in either bulk heterojunction or sequentially deposited active layers. In particular, producing adequate vertical concentration gradients with higher concentrations of ED and EA close to the anode and cathode, respectively, results in an improved charge collection and consequently higher photovoltaic parameters such as the fill factor. In this review, we relate processes to generate active layers with ED–EA vertical concentration gradients. After summarizing the formation of such concentration gradients in single layer active layers through processes such as annealing or additives, we will verify that sequential deposition of multilayered active layers can be an efficient approach to remarkably increase the fill factor and PCE of PSCs. In fact, applying this challenging approach to fabricate inverted architecture PSCs has the potential to generate low-cost, high efficiency and stable devices, which may revolutionize worldwide energy demand and/or help develop next generation devices such as semi-transparent photovoltaic windows. PMID:28772878

Radium concentration factors and their use in health and environmental risk assessment

International Nuclear Information System (INIS)

Meinhold, A.F.; Hamilton, L.D.

1991-01-01

Radium is known to be taken up by aquatic animals, and tends to accumulate in bone, shell and exoskeleton. The most common approach to estimating the uptake of a radionuclide by aquatic animals for use in health and environmental risk assessments is the concentration factor method. The concentration factor method relates the concentration of a contaminant in an organism to the concentration in the surrounding water. Site specific data are not usually available, and generic, default values are often used in risk assessment studies. This paper describes the concentration factor method, summarizes some of the variables which may influence the concentration factor for radium, reviews reported concentration factors measured in marine environments and presents concentration factors derived from data collected in a study in coastal Louisiana. The use of generic default values for the concentration factor is also discussed

Optimizing measurement sensitivity to facilitate monitoring environmental levels of Rn-daughter concentrations

International Nuclear Information System (INIS)

Keefe, D.J.; McDowell, W.P.; Groer, P.G.; Witek, R.T.

1977-01-01

In the measurement of environmental levels of radioactivity, the primary problem is the accumulation of a statistically meaningful number of counts within a reasonable period of time. In the case of measurements of airborne 222 Rn-daughter concentrations, the problem is further complicated by the particularly short half-life, 3.05 minutes, of RaA (Po 218 ). Since the Rn-daughters, (RaA, RaB [Pb 214 ] and RaC [Bi 214 ]) are of interest, the equations interrelating these Rn-daughter concentrations were derived from the laws of radioactive-series decay. These equations, although straightforward, are cumbersome to solve. To facilitate the efficient use of these equations, a computer program has been written which permits the calculation of Rn-daughter concentrations or expected counts for a given set of measurement parameters (flow rate and detector efficiencies). A subroutine then calculates the optimum pumping and counting times required to provide the number of counts necessary for acceptable statistics at environmental levels of 222 Rn-daughter concentrations. This subroutine contains a set of parameters, flow rate and efficiencies, that are fixed using realistic restrictions. The use of these optimized pumping and counting times results in maximum measurement sensitivity under realistic constraints

Environmental Conditions Associated with Elevated Vibrio parahaemolyticus Concentrations in Great Bay Estuary, New Hampshire.

Directory of Open Access Journals (Sweden)

Erin A Urquhart

Full Text Available Reports from state health departments and the Centers for Disease Control and Prevention indicate that the annual number of reported human vibriosis cases in New England has increased in the past decade. Concurrently, there has been a shift in both the spatial distribution and seasonal detection of Vibrio spp. throughout the region based on limited monitoring data. To determine environmental factors that may underlie these emerging conditions, this study focuses on a long-term database of Vibrio parahaemolyticus concentrations in oyster samples generated from data collected from the Great Bay Estuary, New Hampshire over a period of seven consecutive years. Oyster samples from two distinct sites were analyzed for V. parahaemolyticus abundance, noting significant relationships with various biotic and abiotic factors measured during the same period of study. We developed a predictive modeling tool capable of estimating the likelihood of V. parahaemolyticus presence in coastal New Hampshire oysters. Results show that the inclusion of chlorophyll a concentration to an empirical model otherwise employing only temperature and salinity variables, offers improved predictive capability for modeling the likelihood of V. parahaemolyticus in the Great Bay Estuary.

Concentration processes under tubesheet sludge piles in nuclear steam generators

International Nuclear Information System (INIS)

Gonzalez, F.; Spekkens, P.

1987-01-01

The process by which bulk water solutes are concentrated under tubesheet sludge piles in nuclear steam generators was investigated in the laboratory under simulated CANDU operating conditions. Concentration rates were found to depend on the tube heat flux and pile depth, although beyond a critical depth the concentration efficiency decreased. This efficiency could be expressed by a concentration coefficient, and was found to depend also on the sludge pile porosity. Solute concentration profiles in the sludge pile suggested that the concentration mechanism in a high-porosity/permeability pile is characterized by boiling mainly near or at the tube surface, while in low-porosity piles, the change of phase may also become important in the body of the sludge pile. In all cases, the full depth of the pile was active to some extent in the concentration process. As long as the heat transfer under the pile was continued, the solute remained under the pile and slowly migrated toward the bottom. When the heat transfer was stopped, the solute diffused back into the bulk solution at a rate slower than that of the concentration process

Assessing the environmental sustainability of electricity generation in Chile.

Science.gov (United States)

Gaete-Morales, Carlos; Gallego-Schmid, Alejandro; Stamford, Laurence; Azapagic, Adisa

2018-09-15

Around 40% of electricity in Chile is supplied by renewables and the rest by fossil fuels. Despite the growing electricity demand in the country, its environmental impacts are as yet unknown. To address this gap, the current study presents the first comprehensive assessment of the life cycle environmental sustainability of electricity generation in Chile. Both the individual sources and the electricity mix over the past 10 years are considered. The following sources present in the electricity mix are evaluated: coal, oil, natural gas, biogas, biomass, wind, solar photovoltaics (PV) and hydropower. In total, 10 electricity technologies and 174 power plants installed across the country have been considered. Eleven environmental impacts have been estimated, including global warming, human toxicity, ecotoxicities, as well as resource and ozone layer depletion. The results reveal that hydropower is environmentally the most sustainable option across the impacts, followed by onshore wind and biogas. Electricity from natural gas has 10%-84% lower impacts than biomass for seven categories. It is also 13%-98% better than solar PV for six impacts and 17%-66% than wind for four categories. Solar PV has the highest abiotic depletion potential due to the use of scarce elements in the manufacture of panels. While electricity generation has grown by 44% in the past 10 years, all the impacts except ozone layer depletion have increased by 1.6-2.7 times. In the short term, environmental regulations should be tightened to improve the emissions control from coal and biomass plants. In the medium term, the contribution of renewables should be ramped up, primarily increasing the hydro, wind and biogas capacity. Coal and oil should be phased out, using natural gas as a transitional fuel to help the stability of the grid with the increasing contribution of intermittent renewables. Copyright © 2018 Elsevier B.V. All rights reserved.

Concentrations of environmental organic contaminants in meat and meat products and human dietary exposure: A review.

Science.gov (United States)

Domingo, José L

2017-09-01

Meat and meat products is one of the most relevant food groups in an important number of human diets. Recently, the IARC, based on results of a number of epidemiological studies, classified the consumptions of red meat and processed meat as "probably carcinogenic to humans" and as "carcinogenic to humans", respectively. It was suggested that the substances responsible of the potential carcinogenicity would be mainly generated during meat processing, such as curing and smoking, or when meat is heated at high temperatures. However, the exposure to environmental pollutants through meat consumption was not discussed. The purpose of the present paper was to review recent studies reporting the concentrations of PCDD/Fs, DL-PCBs and PAHs in meat and meat products, as well as the human exposure to these pollutants through the diet. It is concluded that the health risks derived from exposure to carcinogenic environmental contaminants must be considered in the context of each specific diet, which besides meat and meat products, includes other foodstuffs containing also chemical pollutants, some of them with carcinogenic potential. Anyhow, meat and meat products are not the main food group responsible of the dietary exposure to carcinogenic (or probably carcinogenic) environmental organic pollutants. Copyright © 2017 Elsevier Ltd. All rights reserved.

Arsenic concentrations, related environmental factors, and the predicted probability of elevated arsenic in groundwater in Pennsylvania

Science.gov (United States)

Gross, Eliza L.; Low, Dennis J.

2013-01-01

Analytical results for arsenic in water samples from 5,023 wells obtained during 1969–2007 across Pennsylvania were compiled and related to other associated groundwater-quality and environmental factors and used to predict the probability of elevated arsenic concentrations, defined as greater than or equal to 4.0 micrograms per liter (µg/L), in groundwater. Arsenic concentrations of 4.0 µg/L or greater (elevated concentrations) were detected in 18 percent of samples across Pennsylvania; 8 percent of samples had concentrations that equaled or exceeded the U.S. Environmental Protection Agency’s drinking-water maximum contaminant level of 10.0 µg/L. The highest arsenic concentration was 490.0 µg/L.

Short-term effects of medetomidine on photosynthesis and protein synthesis in periphyton, epipsammon and plankton communities in relation to predicted environmental concentrations.

Science.gov (United States)

Ohlauson, Cecilia; Eriksson, Karl Martin; Blanck, Hans

2012-01-01

Medetomidine is a new antifouling substance, highly effective against barnacles. As part of a thorough ecotoxicological evaluation of medetomidine, its short-term effects on algal and bacterial communities were investigated and environmental concentrations were predicted with the MAMPEC model. Photosynthesis and bacterial protein synthesis for three marine communities, viz. periphyton, epipsammon and plankton were used as effect indicators, and compared with the predicted environmental concentrations (PECs). The plankton community showed a significant decrease in photosynthetic activity of 16% at 2 mg l⁻¹ of medetomidine, which was the only significant effect observed. PECs were estimated for a harbor, shipping lane and marina environment using three different model scenarios (MAMPEC default, Baltic and OECD scenarios). The highest PEC of 57 ng l⁻¹, generated for a marina with the Baltic scenario, was at least 10,000-fold lower than the concentration that significantly decreased photosynthetic activity. It is concluded that medetomidine does not cause any acute toxic effects on bacterial protein synthesis and only small acute effects on photosynthesis at high concentrations in marine microbial communities. It is also concluded that the hazard from medetomidine on these processes is low since the effect levels are much lower than the highest PEC.

Entropy Generation of Shell and Double Concentric Tubes Heat Exchanger

Directory of Open Access Journals (Sweden)

basma abbas abdulmajeed

2016-06-01

Full Text Available Entropy generation was studied for new type of heat exchanger (shell and double concentric tubes heat exchanger. Parameters of hot oil flow rate, temperature of inlet hot oil and pressure drop were investigated with the concept of entropy generation. The results showed that the value of entropy generation increased with increasing the flow rate of hot oil and when cold water flow rate was doubled from 20 to 40 l/min, these values were larger. On the other hand, entropy generation increased with increasing the hot oil inlet temperature at a certain flow rate of hot oil. Furthermore, at a certain hot oil inlet temperature, the entropy generation increased with the pressure drop at different hot oil inlet flow rates. Finally, in order to keep up with modern technology, infrared thermography camera was used in order to measure the temperatures. The entropy generation was determined with lower values when infrared thermography camera was used to measure the temperatures, compared with the values obtained by using thermocouples.

Environmental degradation costs in electricity generation: The case of the Brazilian electrical matrix

International Nuclear Information System (INIS)

Alves, Laura Araujo; Uturbey, Wadaed

2010-01-01

The main purpose of this paper is to emphasize the importance of including environmental degradation costs in the long-term planning of the Brazilian electricity sector. To this aim, environmental external costs associated to both hydro-power and thermal-power electricity generation are investigated. Monetary valuation methodologies are applied and environmental degradation costs, expressed in per kWh of generated energy, are obtained for the main types of generation sources of the Brazilian electricity matrix. Both local pollution due to particulate matter emissions and global warming effects are assessed. A classification of the sources from the point of view of their impact on the environment is given. Degradation costs associated to the installed capacity expansion in the Brazilian electricity sector during the time horizon 2007-2016 are estimated. These resulting costs represent lower boundary damage estimates associated only with the energy to be generated during the period. Results indicate that local pollution caused by a small number of plants could be even more costly to society than global warming and, also, show the importance of considering not only unitary damage costs but the participation of each source on the generated energy during the time horizon, as a guide to planning and policy making.

Thermoelectric generators for efficiency improvement of power generation by motor generators – Environmental and economic perspectives

International Nuclear Information System (INIS)

Patyk, Andreas

2013-01-01

Highlights: ► TEGs can save costs and reduce environmental burden in a wide range of conditions. ► Reduction of the environmental burden is still possible under worse conditions. ► Under the same conditions steam expanders produce bigger amounts of electricity. ► Steam expanders are more eco-efficient in the upper performance range. ► TEG production plays only a small role for the overall assessment. -- Abstract: The use of waste heat from exhaust gas of internal combustion engines in power plants and CHP plants is considered a promising application field for thermoelectrics (TE). Some recent studies have provided important knowledge on the energy efficiency of current and future thermoelectric generators (TEGs). The focus of these studies has been primarily on the precise modelling of power units and their operation, i.e., the quantification of power production by TEGs. One of the studies additionally assessed the costs and the CO 2 emissions of fuel combustion, without equipment and fuel supply. Until now, there was no life cycle-related analysis considering TEG and power unit manufacture, environmental impacts beyond climate change and competing technologies for waste heat utilisation. In order to fill this gap, the present study applies the life cycle approach, takes account of a variety of environmental impacts and costs and compares TEGs with the competing steam expander technology. The results show that, under many conditions, TEGs in power units can save energy costs and reduce the environmental burden, i.e., they are eco-efficient. With additional expenditure, energy savings and environmental benefits can be achieved even under disadvantageous conditions. However, in the upper power range the performance of steam expanders in terms of electricity production and eco-efficiency is better. The reduction costs of greenhouse gas emissions and environmental impacts as eco-efficiency indicators show identical patterns. Under reasonable operating

GENII [Generation II]: The Hanford Environmental Radiation Dosimetry Software System: Volume 3, Code maintenance manual: Hanford Environmental Dosimetry Upgrade Project

International Nuclear Information System (INIS)

Napier, B.A.; Peloquin, R.A.; Strenge, D.L.; Ramsdell, J.V.

1988-09-01

The Hanford Environmental Dosimetry Upgrade Project was undertaken to incorporate the internal dosimetry models recommended by the International Commission on Radiological Protection (ICRP) in updated versions of the environmental pathway analysis models used at Hanford. The resulting second generation of Hanford environmental dosimetry computer codes is compiled in the Hanford Environmental Dosimetry System (Generation II, or GENII). This coupled system of computer codes is intended for analysis of environmental contamination resulting from acute or chronic releases to, or initial contamination of, air, water, or soil, on through the calculation of radiation doses to individuals or populations. GENII is described in three volumes of documentation. This volume is a Code Maintenance Manual for the serious user, including code logic diagrams, global dictionary, worksheets to assist with hand calculations, and listings of the code and its associated data libraries. The first volume describes the theoretical considerations of the system. The second volume is a Users' Manual, providing code structure, users' instructions, required system configurations, and QA-related topics. 7 figs., 5 tabs

GENII (Generation II): The Hanford Environmental Radiation Dosimetry Software System: Volume 3, Code maintenance manual: Hanford Environmental Dosimetry Upgrade Project

Energy Technology Data Exchange (ETDEWEB)

Napier, B.A.; Peloquin, R.A.; Strenge, D.L.; Ramsdell, J.V.

1988-09-01

The Hanford Environmental Dosimetry Upgrade Project was undertaken to incorporate the internal dosimetry models recommended by the International Commission on Radiological Protection (ICRP) in updated versions of the environmental pathway analysis models used at Hanford. The resulting second generation of Hanford environmental dosimetry computer codes is compiled in the Hanford Environmental Dosimetry System (Generation II, or GENII). This coupled system of computer codes is intended for analysis of environmental contamination resulting from acute or chronic releases to, or initial contamination of, air, water, or soil, on through the calculation of radiation doses to individuals or populations. GENII is described in three volumes of documentation. This volume is a Code Maintenance Manual for the serious user, including code logic diagrams, global dictionary, worksheets to assist with hand calculations, and listings of the code and its associated data libraries. The first volume describes the theoretical considerations of the system. The second volume is a Users' Manual, providing code structure, users' instructions, required system configurations, and QA-related topics. 7 figs., 5 tabs.

Factors Influencing Compensation Demanded for Environmental Impacts Generated by Different Economic Activities

Directory of Open Access Journals (Sweden)

Virna Vaneza Gutiérrez

2015-07-01

Full Text Available This work advances the understanding of compensation demanded for environmental impacts on atmosphere, lakes and rivers, soil, and ocean generated by mining, urban, fishing and agriculture activities. Our aims are to determine whether compensation demanded depends on the standard variables used in the field of risk perception (as perceived risk, public acceptability and trust in regulating authorities, and to explore whether these relationships depend on the environment affected and on the economic activity generating the impacts. General Linear Models were used to analyze survey responses from 427 citizens of Santiago, Chile. Results showed that compensation demanded depends on perceived risk, acceptability, and on the economic activity, but not on the environment affected. Acceptability depends on trust in authorities, on perceived risk and on the economic activity. Perceived risk depends on trust, the economic activity and the environment affected. Overall, environmental impacts from the mining industry are perceived as riskier, less acceptable, and have a higher compensation demanded than those generated by the other sectors. These results suggest that to achieve sustainable development, regulations should consider not only environmental impacts but also the economic activity originating them.

Reduction of negative environmental impact generated by residues of plant tissue culture laboratory

Directory of Open Access Journals (Sweden)

Yusleidys Cortés Martínez

2016-01-01

Full Text Available The research is based on the activity developed by teaching and research laboratories for biotechnology purposes with an environmental approach to determine potential contamination risk and analyze the residuals generated. The physical - chemical characterization of the residuals was carried out from contamination indicators that can affect the dumping of residual water. In order to identify the environmental risks and sources of microbial contamination of plant material propagated by in vitro culture that generate residuals, all the risk activities were identified, the type of risk involved in each activity was analyzed, as well as whether or not the standards were met of aseptic normative. The dilution and neutralization was proposed for residuals with extreme values of pH. Since the results of the work a set of measures was proposed to reduce the negative environmental impact of the laboratory residuals. Key words: biosafety, environmental management, microbial contamination

Ground level environmental protein concentrations in various ecuadorian environments: potential uses of aerosolized protein for ecological research

Science.gov (United States)

Staton, Sarah J.R.; Woodward, Andrea; Castillo, Josemar A.; Swing, Kelly; Hayes, Mark A.

2014-01-01

Large quantities of free protein in the environment and other bioaerosols are ubiquitous throughout terrestrial ground level environments and may be integrative indicators of ecosystem status. Samples of ground level bioaerosols were collected from various ecosystems throughout Ecuador, including pristine humid tropical forest (pristine), highly altered secondary humid tropical forest (highly altered), secondary transitional very humid forest (regrowth transitional), and suburban dry montane deforested (suburban deforested). The results explored the sensitivity of localized aerosol protein concentrations to spatial and temporal variations within ecosystems, and their value for assessing environmental change. Ecosystem specific variations in environmental protein concentrations were observed: pristine 0.32 ± 0.09 μg/m3, highly altered 0.07 ± 0.05 μg/m3, regrowth transitional 0.17 ± 0.06 μg/m3, and suburban deforested 0.09 ± 0.04 μg/m3. Additionally, comparisons of intra-environmental differences in seasonal/daily weather (dry season 0.08 ± 0.03 μg/m3 and wet season 0.10 ± 0.04 μg/m3), environmental fragmentation (buffered 0.19 ± 0.06 μg/m3 and edge 0.15 ± 0.06 μg/m3), and sampling height (ground level 0.32 ± 0.09 μg/m3 and 10 m 0.24 ± 0.04 μg/m3) demonstrated the sensitivity of protein concentrations to environmental conditions. Local protein concentrations in altered environments correlated well with satellite-based spectral indices describing vegetation productivity: normalized difference vegetation index (NDVI) (r2 = 0.801), net primary production (NPP) (r2 = 0.827), leaf area index (LAI) (r2 = 0.410). Moreover, protein concentrations distinguished the pristine site, which was not differentiated in spectral indices, potentially due to spectral saturation typical of highly vegetated environments. Bioaerosol concentrations represent an inexpensive method to increase understanding of environmental changes, especially in densely vegetated

Genotypic and environmental variation in chromium, cadmium and lead concentrations in rice.

Science.gov (United States)

Zeng, Fanrong; Mao, Ying; Cheng, Wangda; Wu, Feibo; Zhang, Guoping

2008-05-01

Genotypic and environmental variation in Cr, Cd and Pb concentrations of rice grains and the interaction between these metals were investigated by using 138 rice genotypes grown in three contaminated soils. There were significant genotypic differences in the three heavy metal concentrations of rice grains, with the absolute difference among 138 genotypes in grain Cr, Cd and Pb concentrations being 24.5-, 9.1- and 23.8-folds, respectively, under the slightly contaminated soil (containing 4.61mgkg(-1) Cr, 1.09mgkg(-1) Cd and Pb 28.28mgkg(-1), respectively). A highly significant interaction occurred between genotype and environment (soil type) in the heavy metal concentrations of rice grains. Cr concentration in rice grains was not correlated with Cd and Pb concentration. However, there was a significant correlation between Cd and Pb in slightly and highly contaminated soils. The results suggest the possibility to develop the rice cultivars with low Cd and Pb concentrations in grain.

Business analysis of generation considering environmental opportunities; Analise de negocios de geracao considerando oportunidades ambientais

Energy Technology Data Exchange (ETDEWEB)

Cyrillo, Ivo Ordonha [Universidade de Sao Paulo (ENERQ/USP), SP (Brazil). Centro de Estudos em Regulacao e Qualidade de Energia; Pelegrini, Marcelo A.; Gemignani, Matheus M.F.

2008-07-01

The project 'Business's Power Generation Evaluation Considering Environmental Opportunities' is about developing a methodology to analyze feasibility of new power generation factory from the point of view of the investor, examining the technical, economic-financial, risk, regulatory, social and environmental aspects. The opportunities arising from Kyoto Protocol were added in feasibility's analysis. (author)

Coastal and offshore wind energy generation: is it environmentally benign?

Energy Technology Data Exchange (ETDEWEB)

Wilson, J. C.; Elliott, M.; Cutts, N. D.; Mander, L.; Mendao, V.; Perez-Dominguez, R.; Phelps, A. [Institute of Estuarine and Coastal Studies, University of Hull, Hull, HU6 7RX (United Kingdom); Wilson, J. C. [Amec, Booths Park, Chelford Road, Knutsford, Cheshire, WA16 8QZ (United Kingdom); Mendao, V. [Projecto Delfim, Centro Portugues de Estudo dos Mamiferos Marinhos, Rua Alto do Duque, 45, 1400-009 Lisboa (Portugal)

2010-07-15

Offshore and coastal wind power is one of the fastest growing industries in many areas, especially those with shallow coastal regions due to the preferable generation conditions available in the regions. As with any expanding industry, there are concerns regarding the potential environmental effects which may be caused by the installation of the offshore wind turbines and their associated infrastructure, including substations and subsea cables. These include the potential impacts on the biological, physical and human environments. This review discusses in detail the potential impacts arising from offshore wind farm construction, and how these may be quantified and addressed through the use of conceptual models. It concludes that while not environmentally benign, the environmental impacts are minor and can be mitigated through good siting practices. In addition, it suggests that there are opportunities for environmental benefits through habitat creation and conservation protection areas. (authors)

Techno-economic and environmental analysis of power generation expansion plan of Ghana

International Nuclear Information System (INIS)

Awopone, Albert K.; Zobaa, Ahmed F.; Banuenumah, Walter

2017-01-01

This paper examines the current electrical generation expansion plan of Ghana and compares it with proposed expansion pathways with higher penetration of Renewable Energy Technologies. An adaptation of Schwartz's Scenario Methodology was used to develop the scenarios which were then analysed using the Long-range Alternatives Planning (LEAP) model. Each of the scenarios represents policy options for generation expansion in Ghana up to 2040. Energy, economic and environmental analysis of the three alternative scenarios compared to the base scenarios was undertaken. Sensitivity results show that, if the country were to follow the generation expansion path described in the renewable energy scenarios, it could reap economic benefits of 0.5–13.23% depending on the developments in fuel prices and renewable technology capital cost. The analysis further quantifies benefits to be derived from a reduction in Greenhouse gases of the scenarios. Policy implications for the generation system of Ghana based on the results are also discussed. - Highlights: • LEAP demand projection for Ghana from 2010 to 2014. • Develop scenarios using an adaptation of Schwartz’s scenario approach. • Develop LEAP model for generation scenario. • Each scenario represents possible generation expansion strategy. • High renewable energy systems penetration results in net economic and environmental benefits.

Environmental pricing of externalities from different sources of electricity generation in Chile

International Nuclear Information System (INIS)

Aravena, Claudia; Hutchinson, W. George; Longo, Alberto

2012-01-01

The rapid increase in electricity demand in Chile means a choice must be made between major investments in renewable or non-renewable sources for additional production. Current projects to develop large dams for hydropower in Chilean Patagonia impose an environmental price by damaging the natural environment. On the other hand, the increased use of fossil fuels entails an environmental price in terms of air pollution and greenhouse gas emissions contributing to climate change. This paper studies the debate on future electricity supply in Chile by investigating the preferences of households for a variety of different sources of electricity generation such as fossil fuels, large hydropower in Chilean Patagonia and other renewable energy sources. Using Double Bounded Dichotomous Choice Contingent Valuation, a novel advanced disclosure method and internal consistency test are used to elicit the willingness to pay for less environmentally damaging sources. Policy results suggest a strong preference for renewable energy sources with higher environmental prices imposed by consumers on electricity generated from fossil fuels than from large dams in Chilean Patagonia. Policy results further suggest the possibility of introducing incentives for renewable energy developments that would be supported by consumers through green tariffs or environmental premiums. Methodological findings suggest that advanced disclosure learning overcomes the problem of internal inconsistency in SB-DB estimates.

Impacts of environmental degradation and climate change on electricity generation in Malawi

Energy Technology Data Exchange (ETDEWEB)

Kaunda, Chiyembekezo S. [Department of Energy and Process Engineering – WaterPower Laboratory, Norway University of Science and Technology, Trondheim NO-7491 (Norway); Mtalo, Felix [Department of Water Resources Engineering, University of Dar es Salaam, P.O. Box 35031, Dar es Salaam (Tanzania, United Republic of)

2013-07-01

Hydropower is an important energy source in Malawi because it provides almost all of the country’s electricity generation capacity. This paper has reviewed the impacts of environmental degradation and climate change on hydropower generation in Malawi. Energy scenario and other issues that contribute towards the current state of environment have been discussed. All of Malawi’s hydropower stations are run-of-river schemes cascaded along the Shire River with an installed capacity of nearly 280 MW. The generation is impacted negatively by floods, siltation, droughts and aquatic weeds infestation. The way how these challenges are being exacerbated by the poor state of the environment, especially within the Shire River basin in particular is also discussed in the paper. Measures taken by the national electricity utility company on how to manage the impacts are discussed as well. The paper concludes that hydropower generation system in a highly environmental degraded area is difficult to manage both technically and economically. In the case of Malawi, diversifying to other energy sources of generating electricity is considered to be a viable option. Some mitigation measures concerning environment degradation and climate change challenges have been suggested in the paper.

Information Management of Web Application Based Environmental Performance Management in Concentrating Division of PTFI

Science.gov (United States)

Susanto, Arif; Mulyono, Nur Budi

2018-02-01

The changes of environmental management system standards into the latest version, i.e. ISO 14001:2015, may cause a change on a data and information need in decision making and achieving the objectives in the organization coverage. Information management is the organization's responsibility to ensure that effectiveness and efficiency start from its creating, storing, processing and distribution processes to support operations and effective decision making activity in environmental performance management. The objective of this research was to set up an information management program and to adopt the technology as the supporting component of the program which was done by PTFI Concentrating Division so that it could be in line with the desirable organization objective in environmental management based on ISO 14001:2015 environmental management system standards. Materials and methods used covered technical aspects in information management, i.e. with web-based application development by using usage centered design. The result of this research showed that the use of Single Sign On gave ease to its user to interact further on the use of the environmental management system. Developing a web-based through creating entity relationship diagram (ERD) and information extraction by conducting information extraction which focuses on attributes, keys, determination of constraints. While creating ERD is obtained from relational database scheme from a number of database from environmental performances in Concentrating Division.

Information Management of Web Application Based Environmental Performance Management in Concentrating Division of PTFI

Directory of Open Access Journals (Sweden)

Susanto Arif

2018-01-01

Full Text Available The changes of environmental management system standards into the latest version, i.e. ISO 14001:2015, may cause a change on a data and information need in decision making and achieving the objectives in the organization coverage. Information management is the organization’s responsibility to ensure that effectiveness and efficiency start from its creating, storing, processing and distribution processes to support operations and effective decision making activity in environmental performance management. The objective of this research was to set up an information management program and to adopt the technology as the supporting component of the program which was done by PTFI Concentrating Division so that it could be in line with the desirable organization objective in environmental management based on ISO 14001:2015 environmental management system standards. Materials and methods used covered technical aspects in information management, i.e. with web-based application development by using usage centered design. The result of this research showed that the use of Single Sign On gave ease to its user to interact further on the use of the environmental management system. Developing a web-based through creating entity relationship diagram (ERD and information extraction by conducting information extraction which focuses on attributes, keys, determination of constraints. While creating ERD is obtained from relational database scheme from a number of database from environmental performances in Concentrating Division.

Promoting energy-saving and environmentally friendly generation dispatching model in China: Phase development and case studies

DEFF Research Database (Denmark)

Ding, Yi; Yang, Hongliang

2013-01-01

Energy saving and environmental protection are important conditions for the sustainable development of Chinese economy. However current widely used generation scheduling model based on predefined production quota and tariff results in heavy energy consumption and severe environment pollution. From...... 2007, as concerns over energy shortage and environmental pollution, the Chinese authorities introduced the implementation of energy-saving generation dispatching model, which is an important approach to facilitating energy-saving and reduction of pollutant emission. The objective of implementing energy......-saving generation dispatching model is to prioritize the use of renewable energy resources and new power plants with high efficiency without compromising power system security and reliability. This paper analyzes the necessity and feasibility of implementing energy-efficient and environmentally friendly generation...

Genotypic and environmental variation in chromium, cadmium and lead concentrations in rice

International Nuclear Information System (INIS)

Zeng Fanrong; Mao Ying; Cheng Wangda; Wu Feibo; Zhang Guoping

2008-01-01

Genotypic and environmental variation in Cr, Cd and Pb concentrations of rice grains and the interaction between these metals were investigated by using 138 rice genotypes grown in three contaminated soils. There were significant genotypic differences in the three heavy metal concentrations of rice grains, with the absolute difference among 138 genotypes in grain Cr, Cd and Pb concentrations being 24.5-, 9.1- and 23.8-folds, respectively, under the slightly contaminated soil (containing 4.61 mg kg -1 Cr, 1.09 mg kg -1 Cd and Pb 28.28 mg kg -1 , respectively). A highly significant interaction occurred between genotype and environment (soil type) in the heavy metal concentrations of rice grains. Cr concentration in rice grains was not correlated with Cd and Pb concentration. However, there was a significant correlation between Cd and Pb in slightly and highly contaminated soils. The results suggest the possibility to develop the rice cultivars with low Cd and Pb concentrations in grain. - Some rice genotypes had consistently low grain Cr, Cd and Pb concentrations under the soil with differently contaminated levels

Economic evaluation of environmental externalities in China’s coal-fired power generation

International Nuclear Information System (INIS)

Zhao, Xiaoli; Cai, Qiong; Ma, Chunbo; Hu, Yanan; Luo, Kaiyan; Li, William

2017-01-01

Serious environmental externalities exist in China’s power industry. Environmental economics theory suggests that the evaluation of environmental externality is the basis of designing an efficient regulation. The purposes of this study are: (1) to identify Chinese respondents’ preferences for green development of electric power industry and the socio-economic characteristics behind them; (2) to investigate the different attitudes of the respondents towards pollution and CO_2 reduction; (3) to quantitatively evaluate the environmental cost of China’s coal-fired power generation. Based on the method of choice experiments (CE) and the 411 questionnaires with 2466 data points, we found that Chinese respondents prefer PM2.5, SO_2 and NO_x reduction to CO_2 reduction and that the environment cost of coal-fired power plants in China is 0.30 yuan per kWh. In addition, we found that the socio-economic characteristics of income, education, gender, and environmental awareness have significant impacts on respondents’ choices. These findings indicate that the environmental cost of coal-fired power generation is a significant factor that requires great consideration in the formulation of electric power development policies. In addition, importance should also be attached to the implementation of green power price policy and enhancement of environmental protection awareness. - Highlights: • Chinese respondents have willingness to pay premium for green development. • The environment cost of coal-fired power plants in China is 0.30 yuan/kwh. • Chinese respondents prefer PM2.5, SO_2 and NO_x reduction to CO_2 reduction. • Environmental awareness has significant impacts on respondents’ preferences. • Income, education and gender affect the evaluation results.

Economic and environmental balancing in response to NEPA for electric power generating plants

International Nuclear Information System (INIS)

Bender, M.

1976-01-01

Discussion of principles that can provide guidance in responding to the National Environmental Policy Act (NEPA) in the planning of electric power generating plants. The environmental assessment procedure described is initiated by considering alternative decisions in concern for environmental assessment. Having defined the decision paths, the assessment proceeds in a four-phase sequence: Correlation of the alternatives with resource and marketing restraints; screening the alternatives for environmental adequacy and specifying the needed technological refinement; examination of the economics in terms of energy costs; comparing the energy cost with the environmental index and selecting the combination that best reflects the current social preference. (Auth.)

Field test of thermoelectric generator using parabolic trough solar concentrator for power generation

Science.gov (United States)

Viña, Rommel R.; Alagao, Feliciano B.

2018-03-01

A 2.4587 square meter effective area cylindrical parabolic solar concentrator was fabricated. The trough concentrator is a 4-ft by 8-ft metal sheet with solar mirror film adhered on it and it is laid on a frame with steel tubes bent in a shape of a parabola. On the focal region of the parabolic trough is the 1.22-m by 0.10-m absorber plate made of copper and coated flat black. This plate served as high temperature reservoir of the eight equally spaced TEC1-12710T125 thermoelectric modules. On the cold side of the modules is a 2.5-in. by 1-in. rectangular aluminum tube with coolant flowing inside. The coolant loop included a direct contact cooling tower which maintained the module cold side assembly inlet temperature of about 28°C. Collector temperature was also kept below the 125°C module maximum operating temperature by controlling the effective area. This was accomplished by adjusting the reflector covering. Using a dummy load and with 8 modules in series, tests results indicated current readings up to 179.4 mA with a voltage of 10.6 VDC and 27% of reflector area or voltage reading up to 12.7 VDC with a current of 165 mA. A steady voltage of 12 VDC was achieved with the use of a voltage regulator. A voltage above 12 VDC will be required to charge a storage battery. Overall results showed the potential of thermoelectric generator (TEG) in combination with solar energy in power generation.

Evaluation of negative environmental impacts of electricity generation: Neoclassical and institutional approaches

International Nuclear Information System (INIS)

Kim, Sang-Hoon

2007-01-01

Neoclassical and institutional economics have developed different theories and methodologies for evaluating environmental and social impacts of electricity generation. The neoclassical approach valuates external costs, and the institutional approach uses social cost valuation and MCDM methods. This paper focuses on three dimensions: theoretical and methodological backgrounds; critical review of specific studies: methodologies, results, and limitations; and discussing their results and implications for environmental policy and further research. The two approaches lead to a common conclusion that fossil fuels and nuclear power show the highest environmental impact. Despite the common conclusion, the conclusion has limited implications for environmental policy because of the weakness of their methodologies

Nigeria electricity crisis: Power generation capacity expansion and environmental ramifications

International Nuclear Information System (INIS)

Aliyu, Abubakar Sadiq; Ramli, Ahmad Termizi; Saleh, Muneer Aziz

2013-01-01

Access to clean and stable electricity is essential in actualizing Nigeria's quest for joining the league of twenty most industrious nations by the year 2020 (vision 20:2020). No country can develop and sustain it development without having a minimum access to electricity for it larger percentage of its population. At present, Nigeria depends petroleum reserves and its aged hydro plant instalments for electricity generation to feed the 40% of its total population that are connected to the national grid. This paper summarizes literature on the current energy issues in Nigeria and introduces the difficulty of the issues involved. The paper also analyses the current (2010) electricity generation as well as the future expansion plans of the Government in 20 years period. The plan includes the introduction of new electrify generation technologies that have not been in used in the base year (2010). The electricity generation system of (including the future expansion plan) was simulated using the LEAP System (Long-range Energy Alternative and Planning). We also investigated the potential environmental impact of siting a nuclear power plant in one of the potential sites based on the site's specific micro-meteorology (land use) and meteorology using the US EPA (Environmental Protection Agency) models; AERMOD 12345. - Highlights: • This paper scrutinizes literature on Nigeria's energy crisis and presents the policies of the clean technology as solutions. • Only 40% of Nigeria's population is connected to the grid; and this population faces power problems 60% of the time. • Simulation of Nigeria electricity generation system was done. • Air dispersion modellingmodelling for radiological health risk from NPP was done

Investigation of Solar Hybrid Electric/Thermal System with Radiation Concentrator and Thermoelectric Generator

Directory of Open Access Journals (Sweden)

Edgar Arturo Chávez Urbiola

2013-01-01

Full Text Available An experimental study of a solar-concentrating system based on thermoelectric generators (TEGs was performed. The system included an electrical generating unit with 6 serially connected TEGs using a traditional semiconductor material, Bi2Te3, which was illuminated by concentrated solar radiation on one side and cooled by running water on the other side. A sun-tracking concentrator with a mosaic set of mirrors was used; its orientation towards the sun was achieved with two pairs of radiation sensors, a differential amplifier, and two servomotors. The hot side of the TEGs at midday has a temperature of around 200°C, and the cold side is approximately 50°C. The thermosiphon cooling system was designed to absorb the heat passing through the TEGs and provide optimal working conditions. The system generates 20 W of electrical energy and 200 W of thermal energy stored in water with a temperature of around 50°C. The hybrid system studied can be considered as an alternative to photovoltaic/thermal systems, especially in countries with abundant solar radiation, such as Mexico, China, and India.

Tritium concentration and variation of environmental water in China

International Nuclear Information System (INIS)

Ren Tianshan; Zhao Qiufen; Liu Yan; Chen Bingru; Chen Jiashen; Deng Guolun; Gao Pingying; Kuan Yungu

2004-01-01

To estimate the baseline level of tritium concentrations of environmental waters before the operation of the first Chinese nuclear power plant, 1547 water samples of eight categories all over China were sampled in the early 1990s for tritium measurement. The measurements were performed with low background liquid scintillation technology. The average tritium radioactive concentrations were 8.96±4.30, 5.42±0.33, 4.77±1.15, 4.55±0.35, 4.04±0.10, 4.04±0.94, 2.38±0.30, 1.34±0.40 Bq/L for air vapor water, precipitation, river water, lake water, tap water, well water, spring water and sea water, respectively, as listed in Table 1. The results show that the tritium concentations in the early 1990s were significantly lower than that in the 1960s and almost reached to the nature tritium concentrations levels. The index of annual reduction rate of tritium concentrations for most water categories were in the range between -3.1%∼-6.3% in the period of 1978 to 1992, and -4.1%∼-5.7% in the 1990s, however, the averages for air vapor water, precipitation and spring water show slow increase with time in recent years. The regional distribution of tritium concentrations show a tendency being of higher in the north and northwest and lower in the south and southeast, indicating latitude and longitude distribution tendencies. The slopes of tritium concentration-latitude line were in the range of 0.33 - 0.18 (Bq/L)/ degree N for air vapor water, precipitation, river water and spring water, while in the range of 0.012-0.068 (Bq/L)/ degree N. The slopes of tritium concentration-longitude line were in the range of 0.15-0.071 (Bq/L)/ degree E for air vapor water, lake water, tap water and well water, however, the change of tritium concentrations with longitude are not significant. (authors)

Entropy generation as an environmental impact indicator and a sample application to freshwater ecosystems eutrophication

International Nuclear Information System (INIS)

Diaz-Mendez, S.E.; Sierra-Grajeda, J.M.T.; Hernandez-Guerrero, A.; Rodriguez-Lelis, J.M.

2013-01-01

Generally speaking, an ecosystem is seen as a complex set, it is composed by different biotic and abiotic parts. Naturally, each part has specifics functions related with mass and energy, those functions have influence between the parts directly and indirectly, and these functions are subjected to the basic laws of thermodynamics. If each part of the ecosystem is taken as thermodynamics system its entropy generation could be evaluated, then the total entropy generation of the ecosystem must be sum of the entropy generation in each part, to be in accordance with the Gouy-Stodola theorem. With this in mind, in this work an environmental indicator, for any kind of ecosystems, can be determined as a function of the ratio of total entropy generation for reference state, for instance a healthy forest; and the entropy generation of new different state of the same ecosystem can take, for instance a deforestation. Thus, thermodynamics concepts are applied to study the eutrophication of freshwater ecosystems; the strategy is based on techniques that integrate assumptions of the methodology of entropy generation inside ecosystems. The results show that if the amount of entropy generation is small respect a reference state; the sustainability of the ecosystem will be greater. - Highlights: • We estimate an environmental impact indicator using the concept of entropy generation. • It can be a useful tool for assessing the environmental impacts of the society over the environment. • It can be a useful tool to compare new technologies and improve their efficiencies even more. • It can help for a better understanding of the concept of entropy and its role among various classes of processes. • It can help to reduce environmental concerns and increase the sustainability of the planet

Economic and environmental balancing in response to NEPA for electric power generating plants

Energy Technology Data Exchange (ETDEWEB)

Bender, M [Oak Ridge National Lab., Tenn. (USA)

1976-03-01

A discussion is given of principles that can provide guidance in responding to the National Environmental Policy Act (NEPA) in the planning of electric power generating plants. The environmental assessment procedure described is initiated by considering alternative decisions in concern for environmental assessment. Having defined the decision paths, the assessment proceeds in a four-phase sequence: correlation of the alternatives with resource and marketing restraints; screening the alternatives for environmental adequacy and specifying the needed technological refinement; examination of the economics in terms of energy costs; comparing the energy cost with the environmental index and selecting the combination that best reflects the current social preference.

Generation, concentration and purification for ionic entangled states

International Nuclear Information System (INIS)

Yang Ming; Cao Zhuoliang

2007-01-01

In cavity QED, the atoms would be sent through the sequential arrays of cavities for the generation of multi-cavity entanglement, or several atoms would be sent into the same cavity mode one bye one for the generation of multi-atom entanglement. The complexity of these processes will impose limitations on the experimental feasibility of it. So, following our previous publication [International Journal Of Quantum Information 2, 231 (2004)] we will propose an alternative scheme for the preparation of multi-cavity W state via cavity QED, which uses the geometrical method to do what other authors have proposed previously using sequential arrays of cavities. Due to the impossibility that one quantum system can be isolated from the environment absolutely, the entanglement of the entangled objects will decrease exponentially with the propagating distance of the objects, and the practically available quantum entangled states are all non-maximally entangled states or the more general case--mixed states. Following our previous publications [Phys. Rev. A 72, 042307 (2005), ibid. 71, 012308 (2005)], we will propose an entanglement generation, concentration and purification scheme for atomic or ionic system, which is mainly based on Cavity QED and linear optical elements. This purification process avoids the controlled-NOT (C-NOT) operations needed in the original purification protocol, which simplifies the whole purification process

An electron microscopy based method for the detection and quantification of nanomaterial number concentration in environmentally relevant media

Energy Technology Data Exchange (ETDEWEB)

Prasad, A. [School of Geography, Earth and Environmental Sciences, College of Life and Environmental Sciences, University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom); Lead, J.R., E-mail: jlead@mailbox.sc.edu [School of Geography, Earth and Environmental Sciences, College of Life and Environmental Sciences, University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom); Center for Environmental Nanoscience and Risk, Department of Environmental Health Sciences, Arnold School of Public Health, University South Carolina, Columbia 29208, SC (United States); Baalousha, M., E-mail: mbaalous@mailbox.sc.edu [Center for Environmental Nanoscience and Risk, Department of Environmental Health Sciences, Arnold School of Public Health, University South Carolina, Columbia 29208, SC (United States)

2015-12-15

Improved detection and characterization of nanomaterials (NMs) in complex environmental media requires the development of novel sampling approaches to improve the detection limit to be close to environmentally realistic concentrations. Transmission electron microscopy (TEM) is an indispensable metrological tool in nanotechnology and environmental nanoscience due to its high spatial resolution and analytical capabilities when coupled to spectroscopic techniques. However, these capabilities are hampered by the conventional sample preparation methods, which suffer from low NM recovery. The current work presents a validated, fully quantitative sampling technique for TEM that overcomes conventional sample preparation shortcomings, and thus enables the use of TEM for measurement of particle number concentration and their detection in complex media at environmentally realistic concentrations. This sampling method is based on ultracentrifugation of NMs from suspension onto a poly-L-lysine (PLL) functionalized TEM grid, using active deposition (by ultracentrifugation) and retention (by PLL interactions with NM surface) of NMs on the substrate, enabling fully quantitative analysis. Similar analysis with AFM was satisfactory in simple media but the lack of chemical-selectivity of AFM limits its applicability for the detection of NMs in complex environmental samples. The sampling approach was validated using both citrate- and PVP-coated AuNMs in pure water, which demonstrated an even distribution of NM on the TEM grid and high NM recovery (80–100%) at environmentally relevant NM concentrations (ca. 0.20–100 μg L{sup −1}). The applicability of the sampling method to complex environmental samples was demonstrated by the quantification of particle number concentration of AuNMs in EPA soft water (with and without Suwannee River fulvic acid) and lake water. This sample preparation approach is also applicable to other types of NMs with some modifications (e.g. centrifugation

An electron microscopy based method for the detection and quantification of nanomaterial number concentration in environmentally relevant media

International Nuclear Information System (INIS)

Prasad, A.; Lead, J.R.; Baalousha, M.

2015-01-01

Improved detection and characterization of nanomaterials (NMs) in complex environmental media requires the development of novel sampling approaches to improve the detection limit to be close to environmentally realistic concentrations. Transmission electron microscopy (TEM) is an indispensable metrological tool in nanotechnology and environmental nanoscience due to its high spatial resolution and analytical capabilities when coupled to spectroscopic techniques. However, these capabilities are hampered by the conventional sample preparation methods, which suffer from low NM recovery. The current work presents a validated, fully quantitative sampling technique for TEM that overcomes conventional sample preparation shortcomings, and thus enables the use of TEM for measurement of particle number concentration and their detection in complex media at environmentally realistic concentrations. This sampling method is based on ultracentrifugation of NMs from suspension onto a poly-L-lysine (PLL) functionalized TEM grid, using active deposition (by ultracentrifugation) and retention (by PLL interactions with NM surface) of NMs on the substrate, enabling fully quantitative analysis. Similar analysis with AFM was satisfactory in simple media but the lack of chemical-selectivity of AFM limits its applicability for the detection of NMs in complex environmental samples. The sampling approach was validated using both citrate- and PVP-coated AuNMs in pure water, which demonstrated an even distribution of NM on the TEM grid and high NM recovery (80–100%) at environmentally relevant NM concentrations (ca. 0.20–100 μg L"−"1). The applicability of the sampling method to complex environmental samples was demonstrated by the quantification of particle number concentration of AuNMs in EPA soft water (with and without Suwannee River fulvic acid) and lake water. This sample preparation approach is also applicable to other types of NMs with some modifications (e.g. centrifugation

Indeterminacy, bifurcations and chaos in an overlapping generations model with negative environmental externalities

International Nuclear Information System (INIS)

Antoci, Angelo; Sodini, Mauro

2009-01-01

We analyze an overlapping generations model where agent's welfare depends on three goods: leisure, environmental quality and consumption of a private good. We assume that the production process of the private good depletes the natural resource and that the consumption of the private good alleviates the damages due to environmental deterioration. In such context, we show that individuals' reactions to environmental deterioration may lead to complex dynamics, in particular to the rise of periodic orbits and chaos.

The determinants of atmospheric SO2 concentrations. Reconsidering the environmental Kuznets curve

International Nuclear Information System (INIS)

Kaufmann, Robert K.; Davidsdottir, Brynhildur; Garnham, Sophie; Pauly, Peter

1998-01-01

This analysis explores the effects of income and the spatial intensity of economic activity on the atmospheric concentration of sulfur dioxide. The results indicate that there is a U-shaped relation between income and atmospheric concentration of SO 2 and an inverted U-shaped relation between the spatial intensity of economic activity and SO 2 concentrations. These results suggest that the spatial intensity of economic activity, rather than income, provides the impetus for policies and technologies that reduce SO 2 emissions. Based on this result, the atmospheric concentration of SO 2 in developing nations may decline faster than indicated by previous analyses. The potential for this decline depends on the rate at which income grows relative to population. The trade-off between the effects of income gains and the spatial intensity of economic activity on the atmospheric concentration of SO 2 is consistent with the notion that environmental problems can be ameliorated by slowing population growth and increasing income levels

Environmental benefits of distributed generation with and without emissions trading

International Nuclear Information System (INIS)

Tsikalakis, A.G.; Hatziargyriou, N.D.

2007-01-01

The need for improving energy efficiency and reducing CO 2 emissions and other pollutants, as well as the restructuring of energy markets has favoured the increase of distributed energy resources (DER). The co-ordinated control of these sources comprising renewable energy sources (RES) and distributed generators (DG) characterised by higher efficiencies and lower emissions compared to central thermal generation, when based on coal or oil provide several environmental benefits. These benefits can be quantified based on DER participation in the CO 2 emission trading market. This paper provides a method to calculate emissions savings achieved by the marginal operation of DER in liberalised market conditions using available emissions data. The participation of DER in emissions trading markets is also studied, with respect to profits, pollutants decrease and change in operating schedules. It is shown that the operation of DER can significantly reduce pollutants, provided sufficient remuneration from CO 2 emission trading market participation is provided. Moreover, it is shown that using average emissions values to calculate the environmental benefits of DER might provide misleading results. (author)

Steam Generator Tube Integrity Program: Surry Steam Generator Project, Hanford site, Richland, Benton County, Washington: Environmental assessment

International Nuclear Information System (INIS)

1980-03-01

The US Nuclear Regulatory Commission (NRC) has placed a Nuclear Regulatory Research Order with the Richland Operations Office of the US Department of Energy (DOE) for expanded investigations at the DOE Pacific Northwest Laboratory (PNL) related to defective pressurized water reactor (PWR) steam generator tubing. This program, the Steam Generator Tube Integrity (SGTI) program, is sponsored by the Metallurgy and Materials Research Branch of the NRC Division of Reactor Safety Research. This research and testing program includes an additional task requiring extensive investigation of a degraded, out-of-service steam generator from a commercial nuclear power plant. This comprehensive testing program on an out-of-service generator will provide NRC with timely and valuable information related to pressurized water reactor primary system integrity and degradation with time. This report presents the environmental assessment of the removal, transport, and testing of the steam generator along with decontamination/decommissioning plans

The effect of environmental parameters to dust concentration in air-conditioned space

Science.gov (United States)

Ismail, A. M. M.; Manssor, N. A. S.; Nalisa, A.; Yahaya, N.

2017-08-01

Malaysia has a wet and hot climate, therefore most of the spaces are air conditioned. The environment might affect dust concentration inside a space and affect the indoor air quality (IAQ). The main objective of this study is to study the dust concentration collected inside enclosed air-conditioned space. The measurement was done physically at four selected offices and two classrooms using a number of equipment to measure the dust concentration and environmental parameters which are temperature and relative air humidity. It was found that the highest dust concentration produced in office (temperature of 24.7°C, relative humidity of 66.5%) is 0.075 mg/m3, as compared to classroom, the highest dust concentration produced is 0.060 mg/m3 office (temperature of 25.9°C, relative humidity of 64.0%). However, both measurements show that value still within the safety level set by DOSH Malaysia (2005-2010) and ASHRAE 62.2 2016. The office contained higher dust concentration compared to classroom because of frequent movement transpires daily due to the functional of the offices.

Studies of post-elution concentration of 99m-Tc eluted from a gel type chromatographic generator

International Nuclear Information System (INIS)

Suzuki, Katia N.; Osso Junior, Joao Alberto

2007-01-01

The radiopharmaceuticals most used in Diagnostic Nuclear Medicine are those labeled with the metastable technetium ( 99m Tc) due to its ideal physical properties of decay (t 1/2 6.01 h, Eγ 140 keV), low cost and availability facilitated through the commercial generator 99 Mo / 99m Tc. This radionuclide is formed by the β - decay of 99 Mo adsorbed on an alumina column of the generator and collected in the form of sodium pertechnetate (Na 99m TcO 4 ) by elution with saline solution (0.9%). The Radiopharmacy Center (CR) of the IPEN-CNEN/SP developed a gel type chromatographic generator of MoZr with 99 Mo produced by 98 Mo(n, γ) 99 Mo reaction that occurs in IEA-R1 Nuclear Reactor. The gel is composed of zirconium molybdate with elution volume of 12 ml with an activity of 11100 MBq (300 mCi) producing a radioactive concentration of 925 MBq (34 mCi) / ml. The fission generator gives a higher radioactive concentration around 1850 MBq (69 mCi) / ml. The aim of this work is to study a system of post-elution concentration using ion exchange cartridges in tandem (cation - anion) for the attainment of a high enough radioactive concentration to meet the demand of market, with a proved quality. This system of concentration will be made based in the technique of solid phase extraction (SPE) using commercial cartridges of extraction, which contains the solid phase and eluent saline solution (0.9%). As the eluent results of this system used in the gel generator of MoZr will be compared with the fission generator currently produced by IPEN-CNEN/SP. (author)

Performance assessment of hybrid power generation systems: Economic and environmental impacts

International Nuclear Information System (INIS)

Al-Sharafi, Abdullah; Yilbas, Bekir S.; Sahin, Ahmet Z.; Ayar, T.

2017-01-01

Highlights: • A double-step optimization tool for hybrid power generation systems is introduced. • Economical aspects and the impact of the system on the environment are considered. • A hybrid system comprises PV array-wind turbine-battery-diesel engine is considered. • Real time analysis of the system for full year simulation is carried out. • System optimum configuration at point where total performance index is maximized. - Abstract: This article aims to introduce a double-step performance assessment tool for the hybrid power generation systems. As a case study, a hybrid system comprising PV array, wind-turbine, battery bank and diesel engine is incorporated in hourly based simulations to meet power demand of a residence unit at Dhahran area, Kingdom of Saudi Arabia. Different indicators related to economical and environmental performance assessments of the hybrid system have been considered. In the economic related assessment case, cost of electricity, energy excess percentage, and operating life cycle indicators have been considered and combined to develop the first overall performance index. Renewable contribution, renewable source availability and environmental impact indicators have been considered for the environmental assessment case and they are combined in the second performance index. For either economical or environmental cases, the optimum configuration of the system is achieved by maximizing the first and second overall performance indicators. This innovative optimization tools gives the designer the freedom to assign suitable weights associated with economical aspect, environmental impact, governmental regulations and social impact, for the first and second overall performance indicators, and combine them in the total performance index. The optimum system configuration is at the point where the total performance index is maximized.

Concentration of radionuclides in fresh water fish downstream of Rancho Seco Nuclear Generating Plant

International Nuclear Information System (INIS)

Noshkin, V.E.; Eagle, R.J.; Dawson, J.M.; Brunk, J.L.; Wong, X.M.

1984-01-01

Fish were collected for radionuclide analysis over a 5-month period in 1984 from creeks downstream of the Rancho Seco Nuclear Generating Plant, which has been discharging quantities of some fission and activation products to the waterway since 1981. Among the fish, the bluegill was selected for intensive study because it is very territorial and the radionuclide concentrations detected should be representative of the levels in the local environment at the downstream locations sampled. Among the gamma-emitting radionuclides routinely released, only 134 Cs and 137 Cs were detected in the edible flesh of fish. Concentrations in the flesh of fish decreased with distance from the plant. The relationship between concentration and distance was determined to be exponential. Exponential equations were generated to estimate concentrations in fish at downstream locations where no site-specific information was available. Mean concentrations of 137 Cs in bluegill collected during April, May, July and August from specific downstream stations were not significantly different in spite of the release of 131 mCi to the creeks between April and August. The concentrations in fish are not responding to changes in water concentrations brought about by plant discharges. Diet appears to be a more significant factor than size or weight or water concentration in regulating body burdens of 137 Cs in these fish

Indoor air quality in the Karns research houses: baseline measurements and impact of indoor environmental parameters on formaldehyde concentrations

International Nuclear Information System (INIS)

Matthews, T.G.; Fung, K.W.; Tromberg, B.J.; Hawthorne, A.R.

1985-12-01

Baseline indoor air quality measurements, a nine-month radon study, and an environmental parameters study examining the impact of indoor temperature (T) and relative humidity (RH) levels on formaldehyde (CH 2 O) concentrations have been performed in three unoccupied research homes located in Karns, Tennessee. Inter-house comparison measurements of (1) CH 2 O concentration, (2) CH 2 O emission rates from primary CH 2 O emission sources, (3) radon and radon daughter concentrations, and (4) air exchange rates indicate that the three homes are similar. The results of the nine-month radon study indicate indoor concentrations consistently below the EPA recommended level of 4 pCi/L. Evidence was found that crawl-space concentrations may be reduced using heat pump systems whose outdoor units circulate fresh air through the crawl-space. The modeled results of the environmental parameters study indicate approximate fourfold increases in CH 2 O concentrations from 0.07 to 0.27 ppM for seasonal T and RH conditions of 20 0 C, 30% RH and 29 0 C, 80% RH, respectively. Evaluation of these environmental parameters study data with steady-state CH 2 O concentration models developed from laboratory studies of the environmental dependence of CH 2 O emissions from particleboard underlayment indicate good correlations between the laboratory and field studies

Environmental radiation monitoring data for Point Lepreau Generating Station, 1988. Annual publication

Energy Technology Data Exchange (ETDEWEB)

Sutherland, J K

1989-01-01

Annual report presenting a compilation of the 1988 environmental radiation monitoring program data from samples collected around the Point Lepreau Nuclear Generating Station (PLNGS) and at reference stations remote from PLNGS. About 1,700 analyses were made on 1,200 samples to monitor environmental radiation, including air filters, airborne water vapour, sea water, well water, milk, beach sediments, clams, fish, lobster, dulse, crabs, scallops and lichen. Background radiation is measured by thermoluminescence dosimetry.

Environmental radiation monitoring data for Point Lepreau Generating Station, 1987. Annual publication

Energy Technology Data Exchange (ETDEWEB)

Sutherland, J K

1988-01-01

Annual report presenting a compilation of the 1987 environmental radiation monitoring program data from samples collected around the Point Lepreau Nuclear Generating Station (PLNGS) and at reference stations remote from PLNGS. About 1,800 analyses were made on 1,300 samples to monitor environmental radiation, including air filters, airborne water vapour, sea water, well water, milk, beach sediments, clams, fish, lobster, dulse, crabs, scallops and periwinkles. Background radiation is measured by thermoluminescence dosimetry.

Detection of the actinides and cesium from environmental samples

Science.gov (United States)

Snow, Mathew Spencer

Detection of the actinides and cesium in the environment is important for a variety of applications ranging from environmental remediation to safeguards and nuclear forensics. The utilization of multiple different elemental concentrations and isotopic ratios together can significantly improve the ability to attribute contamination to a unique source term and/or generation process; however, the utilization of multiple elemental "signatures" together from environmental samples requires knowledge of the impact of chemical fractionation for various elements under a variety of environmental conditions (including predominantly aqueous versus arid conditions). The research reported in this dissertation focuses on three major areas: 1. Improving the understanding of actinide-mineral interactions at ultra-low concentrations. Chapter 2 reports a batch sorption and modeling study of Np(V) sorption to the mineral goethite from attomolar to micromolar concentrations. 2. Improving the detection capabilities for Thermal Ionization Mass Spectrometry (TIMS) analyses of ultra-trace cesium from environmental samples. Chapter 4 reports a new method which significantly improves the chemical yields, purification, sample processing time, and ultimately, the detection limits for TIMS analyses of femtogram quantities of cesium from a variety of environmental sample matrices. 3. Demonstrating how actinide and cesium concentrations and isotopic ratios from environmental samples can be utilized together to determine a wealth of information including environmental transport mechanisms (e.g. aqueous versus arid transport) and information on the processes which generated the original material. Chapters1, 3 and 5 demonstrate these principles using Pu, Am, Np, and Cs concentrations and isotopic ratios from contaminated soils taken near the Subsurface Disposal Area (SDA) of Idaho National Laboratory (INL) (a low level radioactive waste disposal site in southeastern Idaho).

Less-studied TCE: are their environmental concentrations increasing due to their use in new technologies?

Science.gov (United States)

Filella, M; Rodríguez-Murillo, J C

2017-09-01

The possible environmental impact of the recent increase in use of a group of technology-critical elements (Nb, Ta, Ga, In, Ge and Te) is analysed by reviewing published concentration profiles in environmental archives (ice cores, ombrotrophic peat bogs, freshwater sediments and moss surveys) and evaluating temporal trends in surface waters. No increase has so far been recorded. The low potential direct emissions of these elements, resulting from their absolute low production levels, make it unlikely that the increasing use of these elements in modern technology has any noticeable effect on their environmental concentrations on a global scale. This holds particularly true for those of these elements that are probably emitted in relatively high amounts from other human activities (i.e., coal combustion and non-ferrous smelting), such as In, the most studied element of the group. Copyright © 2017 Elsevier Ltd. All rights reserved.

New generation LDHI with an improved environmental profile[Low dosage hydrate inhibitors

Energy Technology Data Exchange (ETDEWEB)

Fu, Bob; Houston, Christopher; Spratt, Tony

2005-07-01

A new generation of low dosage hydrate inhibitors has been developed. These inhibitors are specially designed and synthesized in the laboratory in order to achieve a high level of performance as hydrate inhibitors and to improve their environmental profiles. These new inhibitors have been extensively evaluated in the laboratory using high pressure rocking cells. They function like anti-agglomerants by preventing the formation of large hydrate crystals or agglomerates. The resulting hydrate crystals are extremely tiny and finely dispersed in the hydrocarbon stream. In addition to controlling the hydrate crystal growth, these novel molecules demonstrate the ability to extend the induction time to onset of hydrate formation. When compared to the previous generations, the improved performance as well as the favorable environmental characteristics further expand the window for LDHI applications in the fields. (Author)

Comparative analysis of concentrating solar power and photovoltaic technologies: Technical and environmental evaluations

International Nuclear Information System (INIS)

Desideri, U.; Zepparelli, F.; Morettini, V.; Garroni, E.

2013-01-01

Highlights: ► Life cycle was assessed for both concentrated solar power and photovoltaic systems. ► The PV plant has a higher environmental impact than the CSP plant. ► The Global Warming Potential is lower for the CSP than for the PV plant. ► The energy payback time is lower for the CSP than for the PV plant. -- Abstract: Solar energy is an important alternative energy source to fossil fuels and theoretically the most available energy source on the earth. Solar energy can be converted into electric energy by using two different processes: by means of thermodynamic cycles and the photovoltaic conversion. Solar thermal technologies, sometimes called thermodynamic solar technologies, operating at medium (about 500 °C) and high temperatures (about 1000 °C), have recently attracted a renewed interest and have become one of the most promising alternatives in the field of solar energy utilization. Photovoltaic conversion is very interesting, although still quite expensive, because of the absence of moving components and the reduced operating and management costs. The main objectives of the present work are: •to carry out comparative technical evaluations on the amount of electricity produced by two hypothetical plants, located on the same site, for which a preliminary design was made: a solar thermal power plant with parabolic trough collectors and a photovoltaic plant with a single-axis tracking system; •to carry out a comparative analysis of the environmental impact derived from the processes of electricity generation during the whole life cycle of the two hypothetical power plants. First a technical comparison between the two plants was made assuming that they have the same nominal electric power and then the same total covered surface. The methodology chosen to evaluate the environmental impact associated with the power plants is the Life Cycle Assessment (LCA). It allows to analyze all the phases of the life cycle of the plants, from the extraction of

Fieldwork, Co-Teaching and Co-Generative Dialogue in Lower Secondary School Environmental Science

Science.gov (United States)

Rahmawati, Yuli; Koul, Rekha

2016-01-01

This article reports one of the case studies in a 3-year longitudinal study in environmental science education. This case explores the process of teaching about ecosystems through co-teaching and co-generative dialogue in a Year-9 science classroom in Western Australia. Combining with co-teaching and co-generative dialogue aimed at transforming…

Draft Environmental Impact Statement: Proposed Tenaska, Washington II Generation Project

International Nuclear Information System (INIS)

1993-08-01

BPA is considering whether to purchase electrical power from a proposed privately-owned combustion-turbine electrical generation plant in Washington. The plant would be fired by natural gas and would use combined-cycle technology to generate 240 average megawatts (aMW) of energy. The plant would be developed, owned, and operated by Tenaska Power Partners, Inc. The project would be located about 19 kilometers (12 miles) southeast of downtown Tacoma in the Frederickson Industrial Area, Pierce County. The proposed plant would occupy about half of a 6.4-hectare (16-acre) parcel and would be consistent with the industrial character of its surroundings. The proposed site is currently undeveloped and zoned for industrial use by the county. Main environmental concerns identified in the scoping process and evaluated in the Environmental Impact Statement (EIS) include: potential air quality impacts such as emissions and their contribution to the ''greenhouse'' effect; potential health and safety impacts, such as nuisance odors, plant safety, visibility and heat-emission systems which may affect low-flying planes and potential health effects of electric and magnetic fields, and potential water quality impacts such as the amount of wastewater to be discharged, the source and amount of water required for plant operation. These and other issues are discussed in detail in the EIS. The proposed project already includes many features designed to reduce environmental impacts. Based on investigations performed for the EIS, no significant unavoidable adverse environmental impacts associated with the proposed project were identified, and no evidence emerged to suggest that the proposed action is particularly controversial. The EIS is being mailed to numerous agencies, groups, and individuals. There will be a 45-day comment period, during which a Public Hearing will be held

Wuskwatim generation project : Canadian Environmental Assessment Act comprehensive study report

International Nuclear Information System (INIS)

2005-10-01

This study report described the plan by Manitoba Hydro and the Nisichawayasihk Cree Nation (NCN) to construct a new 200- megawatt (MW) generating station at Taskinigup Falls on the Burntwood River, near the outlet of Wuskwatim Lake. This hydroelectric power project will allow Manitoba Hydro to meet its projected energy needs within the next two decades as identified in its 2002/03 Power Resource Plan. It will also allow Manitoba Hydro and NCN to obtain additional export revenues and profits by advancing the in-service date of the Project from 2020 to 2009. A formal environmental assessment is required under the Canadian Environmental Assessment Act (CEAA) because Fisheries and Oceans Canada (DFO) has determined that the Project would cause fish habitat losses requiring an authorization under the Fisheries Act. Many of the structures to be built in navigable waters would also require formal approval under the Navigable Waters Protection Act (NWPA), which has prompted this application of the CEAA. This environmental assessment report has been prepared by DFO in consultation with Transport Canada and other federal authorities concerned. It provides a summary of the Wuskwatim Generation Project and the environment in which it will be built and operated. In addition, the results of public consultations are discussed. It presents an assessment of the Project's influence on fish and fish habitat, birds, species at risk, human health (local air quality, quality of drinking water and consumption of fishery products), navigation, use of renewable resources, and current use of lands and resources for traditional purposes by Aboriginal persons (hunting, trapping, gathering, subsistence fishing and heritage sites). It was concluded that the proposed Project, as defined by the scope of the study, is not likely to cause significant adverse environmental effects. 45 refs., 5 tabs., 13 figs., 3 appendices

Biological effects of environmentally relevant concentrations of the pharmaceutical Triclosan in the marine mussel Perna perna (Linnaeus, 1758)

Energy Technology Data Exchange (ETDEWEB)

Sanzi Cortez, Fernando, E-mail: lecotox@unisanta.br [Instituto de Pesquisas Energeticas e Nucleares IPEN-CNEN/SP, 05508-000 Sao Paulo, SP (Brazil); Laboratorio de Ecotoxicologia, Universidade Santa Cecilia, 11045-907 Santos, SP (Brazil); Dias Seabra Pereira, Camilo [Laboratorio de Ecotoxicologia, Universidade Santa Cecilia, 11045-907 Santos, SP (Brazil); Instituto do Mar, Universidade Federal de Sao Paulo, 11030-400 Santos, SP (Brazil); Ramos Santos, Aldo Ramos [Laboratorio de Ecotoxicologia, Universidade Santa Cecilia, 11045-907 Santos, SP (Brazil); Cesar, Augusto; Choueri, Rodrigo Brasil [Laboratorio de Ecotoxicologia, Universidade Santa Cecilia, 11045-907 Santos, SP (Brazil); Instituto do Mar, Universidade Federal de Sao Paulo, 11030-400 Santos, SP (Brazil); Martini, Gisela de Assis [Laboratorio de Ecotoxicologia, Universidade Santa Cecilia, 11045-907 Santos, SP (Brazil); Bohrer-Morel, Maria Beatriz [Instituto de Pesquisas Energeticas e Nucleares IPEN-CNEN/SP, 05508-000 Sao Paulo, SP (Brazil)

2012-09-15

Triclosan (5-Chloro-2-(2,4-dichlorophenoxy) phenol) is an antibacterial compound widely employed in pharmaceuticals and personal care products. Although this emerging compound has been detected in aquatic environments, scarce information is found on the effects of Triclosan to marine organisms. The aim of this study was to evaluate the toxicity of a concentration range of Triclosan through fertilization assay (reproductive success), embryo-larval development assay (early life stage) and physiological stress (Neutral Red Retention Time assay - NRRT) (adult stage) in the marine sentinel organism Perna perna. The mean inhibition concentrations for fertilization (IC{sub 50} = 0.490 mg L{sup -1}) and embryo-larval development (IC{sub 50} = 0.135 mg L{sup -1}) tests were above environmental relevant concentrations (ng L{sup -1}) given by previous studies. Differently, significant reduction on NRRT results was found at 12 ng L{sup -1}, demonstrating the current risk of the continuous introduction of Triclosan into aquatic environments, and the need of ecotoxicological studies oriented by the mechanism of action of the compound. - Highlights: Black-Right-Pointing-Pointer Triclosan causes biological adverse effects at environmental relevant concentrations. Black-Right-Pointing-Pointer Mechanisms of action oriented assays were more sensitive to detect biological damages. Black-Right-Pointing-Pointer Currently there is environmental risks concerned Triclosan in aquatic ecosystems. - Triclosan causes biological adverse effects at environmentally relevant concentrations.

Biological effects of environmentally relevant concentrations of the pharmaceutical Triclosan in the marine mussel Perna perna (Linnaeus, 1758)

International Nuclear Information System (INIS)

Sanzi Cortez, Fernando; Dias Seabra Pereira, Camilo; Ramos Santos, Aldo Ramos; Cesar, Augusto; Choueri, Rodrigo Brasil; Martini, Gisela de Assis; Bohrer-Morel, Maria Beatriz

2012-01-01

Triclosan (5-Chloro-2-(2,4-dichlorophenoxy) phenol) is an antibacterial compound widely employed in pharmaceuticals and personal care products. Although this emerging compound has been detected in aquatic environments, scarce information is found on the effects of Triclosan to marine organisms. The aim of this study was to evaluate the toxicity of a concentration range of Triclosan through fertilization assay (reproductive success), embryo-larval development assay (early life stage) and physiological stress (Neutral Red Retention Time assay - NRRT) (adult stage) in the marine sentinel organism Perna perna. The mean inhibition concentrations for fertilization (IC 50 = 0.490 mg L −1 ) and embryo-larval development (IC 50 = 0.135 mg L −1 ) tests were above environmental relevant concentrations (ng L −1 ) given by previous studies. Differently, significant reduction on NRRT results was found at 12 ng L −1 , demonstrating the current risk of the continuous introduction of Triclosan into aquatic environments, and the need of ecotoxicological studies oriented by the mechanism of action of the compound. - Highlights: ► Triclosan causes biological adverse effects at environmental relevant concentrations. ► Mechanisms of action oriented assays were more sensitive to detect biological damages. ► Currently there is environmental risks concerned Triclosan in aquatic ecosystems. - Triclosan causes biological adverse effects at environmentally relevant concentrations.

Comparison of hydro-environmental impacts for ebb-only and two-way generation for a Severn Barrage

Science.gov (United States)

Ahmadian, Reza; Falconer, Roger A.; Bockelmann-Evans, Bettina

2014-10-01

Marine renewable energy is playing an increasing significant role in many parts of the world, mainly due to a rise in the awareness of climate change, and its detrimental effects, and the increasing cost of natural resources. The Severn Estuary, located between South West England and South Wales, has a tidal range of up to 14 m which makes it the second highest tidal range in the world. There are a number of barrage proposals amongst various marine renewable energy schemes proposed to be built in the estuary. The Cardiff-Weston STPG (Severn Tidal Power Group) Barrage, which would be one of the world's largest tidal renewable energy schemes if built, is one of the most publicised schemes to-date. This barrage would generate about 17 TWh/annum of power, which is approximately 5% of the UK's electricity consumption, whilst causing significant hydro-environmental and ecological impact on the estuary. This study mainly focuses on investigating the hydro-environmental impacts of the STPG barrage for the option of two-way generation, and compares this with the commonly investigated option of ebb-only generation. The impacts of the barrage were modelled by implementing a linked 1-D/2-D hydro-environmental model, with the capability of modelling several key environmental processes. The model predictions show that the hydro-environmental impacts of the barrage on the Severn Estuary and Bristol Channel, such as changes in the maximum velocity and reduction in suspended sediment and bacteria levels, were less significant for the two-way generation scheme when compared with the corresponding impacts for ebb-only generation.

Environmental review report of an electrical generation facility to be located at the Oaks Sanitary Landfill

International Nuclear Information System (INIS)

Goldstein, D.; Ross, J.; Mountain, D.; Kahal, M.

1998-05-01

The Bentech Group, Inc. (Bentech) applied for a certificate of public convenience and necessity (CPCN) to construct and operate an electric generating system at the Oaks Sanitary Landfill in Laytonsville, Maryland. The focus of the environmental review is to evaluate potential impacts of the proposed electric generation system to air quality, noise, terrestrial, ecological, ground water, surface water, socioeconomic, aesthetic, and cultural resources. This document presents the results of the environmental review analysis, and includes the State's recommended license conditions for operating the electric generating system, which the PSC incorporated into the CPCN

Addressing the Impact of Environmental Xenobiotics in Coal-Fired Flue Gas

Directory of Open Access Journals (Sweden)

Cornelia A. Bulucea

2015-03-01

Full Text Available Dangerous and unstable situations can result from the presence of environmental xenobiotics since their harmful effects on humans and ecosystems are often unpredictable, and building awareness of the environmental risk should be a main concern of humankind. The environmental xenobiotics in the flue gas from a fossil fuel-fired electrical generating station, such as particulate matter (PM, sulfur dioxide (SO2, nitrogen oxides (NOx, and carbon dioxide (CO2, are analyzed in this study, since these xenobiotics are persistent pollutants. Mathematical models of the environmental pollutant vector, estimating the emission factors specific to fossil fuel combustion, are applied to the operation of thermal units in the Turceni electrical generating station, each of which produces a net electrical power of 330 MW. For each stack gas component in the pollutant vector, emission factors and pollutant concentrations are determined. A pattern is also examined depicting the mathematically modelled processes of resonant absorption of an environmental xenobiotic harmonic oscillation by an organism modulated as an absorbing oscillator structure. The xenobiotic concentration degree is represented through a spatial concentration vector, which allows further modelling and simulation of the oscillating regime of environmental xenobiotic absorption.

Promoting energy-saving and environmentally friendly generation dispatching model in China: Phase development and case studies

International Nuclear Information System (INIS)

Ding, Yi; Yang, Hongliang

2013-01-01

Energy saving and environmental protection are important conditions for the sustainable development of Chinese economy. However current widely used generation scheduling model based on predefined production quota and tariff results in heavy energy consumption and severe environment pollution. From 2007, as concerns over energy shortage and environmental pollution, the Chinese authorities introduced the implementation of energy-saving generation dispatching model, which is an important approach to facilitating energy-saving and reduction of pollutant emission. The objective of implementing energy-saving generation dispatching model is to prioritize the use of renewable energy resources and new power plants with high efficiency without compromising power system security and reliability. This paper analyzes the necessity and feasibility of implementing energy-efficient and environmentally friendly generation scheduling models in China. The institutional and technical barriers impeding the implementation of energy-saving generation dispatching model are identified. The development of advanced energy-saving generation scheduling models towards competitive market models and phased planning programs are emphasized in this paper. The effectiveness and experience of provinces piloted energy-saving generation dispatching projects are also discussed. - Highlights: ► Introducing problems of current power generation scheduling model in China. ► Discussing necessity of implementing ESGD model and corresponding barriers. ► Proposing phased planning programs for developing ESGD models. ► Discussing the effectiveness and experience of provinces piloted ESGD projects

Evaluation of the performance characteristics of radon and radon-daughter concentration measurement devices under controlled environmental conditions

International Nuclear Information System (INIS)

Pearson, M.D.

1989-04-01

The Technical Measurements Center (TMC) conducted a study to expose 10 radon and 7 radon-daughter concentration measurement devices in the DOE/GJPO Radon/Radon-Daughter Environmental Chamber for a series of 24 controlled-environment tests. The tests evaluated the devices' response to temperature, relative humidity, dew point, condensation-nuclei concentration, radon-daughter/radon equilibrium ratio, and non-uniform radon and radon-daughter concentration. Devices were evaluated for linear response as a function of concentration. In addition to response to environmental parameters, the evaluation included determining the utility of the devices in providing reasonable assurance of compliance with the radon and radon-daughter concentration standards for DOE remedial action programs. This reasonable assurance criterion is based on a coefficient of variation of 25 percent for devices deployed for year-long measurements and a coefficient of variation of 18 percent for devices deployed for intermittent sampling. 39 refs., 65 figs., 33 tabs

Environmental codes of practice for steam electric power generation

International Nuclear Information System (INIS)

1985-03-01

The Design Phase Code is one of a series of documents being developed for the steam electric power generation industry. This industry includes fossil-fuelled stations (gas, oil and coal-fired boilers), and nuclear-powered stations (CANDU heavy water reactors). In this document, environmental concerns associated with water-related and solid waste activities of steam electric plants are discussed. Design recommendations are presented that will minimize the detrimental environmental effects of once-through cooling water systems, of wastewaters discharged to surface waters and groundwaters, and of solid waste disposal sites. Recommendations are also presented for the design of water-related monitoring systems and programs. Cost estimates associated with the implementation of these recommendations are included. These technical guides for new or modified steam electric stations are the result to consultation with a federal-provincial-industry task force

Electricity generation and environmental externalities: Case studies, September 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-28

Electricity constitutes a critical input in sustaining the Nation`s economic growth and development and the well-being of its inhabitants. However, there are byproducts of electricity production that have an undesirable effect on the environment. Most of these are emissions introduced by the combustion of fossil fuels, which accounts for nearly 70 percent of the total electricity generated in the United States. The environmental impacts (or damages) caused by these emissions are labeled environmental ``externalities.`` Included in the generic term ``externality`` are benefits or costs resulting as an unintended byproduct of an economic activity that accrue to someone other than the parties involved in the activity. This report provides an overview of the economic foundation of externalities, the Federal and State regulatory approaches, and case studies of the impacts of the externality policies adopted by three States.

Process Heat Generation Potential from Solar Concentration Technologies in Latin America: The Case of Argentina

Directory of Open Access Journals (Sweden)

Isidoro Lillo

2017-03-01

Full Text Available This paper evaluates the potential of solar concentration technologies—compound parabolic collector (CPC, linear Fresnel collector (LFC and parabolic trough collector (PTC—as an alternative to conventional sources of energy for industrial processes in Latin America, where high levels of solar radiation and isolated areas without energy supply exist. The analysis is addressed from energy, economic and environmental perspective. A specific application for Argentina in which fourteen locations are analyzed is considered. Results show that solar concentration technologies can be an economically and environmentally viable alternative. Levelized cost of energy (LCOE ranges between 2.5 and 16.9 c€/kWh/m2 and greenhouse gas (GHG emissions avoided range between 33 and 348 kgCO2/(m2·year. CPC technology stands out as the most recommendable technology when the working fluid temperature ranges from 373 K to 423 K. As the working fluid temperature increases the differences between the LCOE values of the CPC and LFC technologies decrease. When 523 K is reached LFC technology is the one which presents the lowest LCOE values for all analyzed sites, while the LCOE values of PTC technology are close to CPC technology values. Results show that solar concentration technologies have reached economic and environmental competitiveness levels under certain scenarios, mainly linked to solar resource available, thermal level requirements and solar technology cost.

Criteria for requesting specific radionuclide analysis through gross α and gross β concentration measurements in environmental samples

International Nuclear Information System (INIS)

Ferreira, E.G.

1988-01-01

This paper suggests some criteria for the decision to proceed with the analysis of specific radionuclides based on results of the determination of gross α and β concentrations in environmental samples of aerosols, water, dairy and agricultural products, soil and sediments. The samples considered are provenient from the environmental surveillance of uranium mining and milling facilities as well as the mining and processing plants of monazite sands. The radionuclides to be analysed are those considered to be the most critical to human health, that is: U-nat; Th-nat; Th-230; Ra-228; Ra-226; Po-210; Pb-210. The measured gross α and β concentrations will be compared with the Maximum Allowable Concentrations for some defined radionuclides. Radiochemical analysis of specific radionuclides may then become necessary, depending upon the results of this comparison. The main goal of the proposed guide is to simplify and to discipline the execution of environmental surveillance programs in a safe and economical way, avoiding unnecessary analysis. (author) [pt

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: BIOQUELL, INC. CLARIS C HYDROGEN PEROXIDE GAS GENERATOR

Science.gov (United States)

The Environmental Technology Verification report discusses the technology and performance of the Clarus C Hydrogen Peroxide Gas Generator, a biological decontamination device manufactured by BIOQUELL, Inc. The unit was tested by evaluating its ability to decontaminate seven types...

Reduction of the environmental concentration of air pollutants by proper geometrical orientation of industrial line sources

International Nuclear Information System (INIS)

Tadmor, J.

1980-01-01

An account is given of an Israeli study of two line sources, one composed of 10 and the other of 20 individual sources. The height of release ranged from 15.7 to 39.6 m, with a uniform rate of release of a gaseous pollutant of 1 Ci/s for each source. Average pollutant concentration was plotted as a function of the rotation angle of the line sources. Reduction of pollutant concentration by a particular rotation of the line sources attained values of up to 50%. At certain rotation angles of the line sources, the environmental concentration was lower even as compared with a single high source. Results also depended on atmospheric conditions. It is suggested that considering the increase in cost of augmenting the height of release as a means of reducing the air pollutant concentration, determination of the optimum geometric orientation of the line sources should be considered as an economical means of improving environmental air quality. (U.K.)

Environmental Impacts of Renewable Electricity Generation Technologies: A Life Cycle Perspective

Energy Technology Data Exchange (ETDEWEB)

Heath, Garvin

2016-01-13

All energy systems impact the environment. Much has been learned about these environmental impacts from decades of research. Through systematic reviews, meta-analysis and original research, the National Renewable Energy Laboratory has been building knowledge about environmental impacts of both renewable and conventional electricity generation technologies. Evidence for greenhouse gas emissions, water and land use will be reviewed mostly from the perspective of life cycle assessment. Impacts from oil and natural gas systems will be highlighted. Areas of uncertainty and challenge will be discussed as suggestions for future research, as well as career opportunities in this field.

Pesticide exposure assessment in flowing waters – results for predicted environmental concentrations in some brooks in Germany

DEFF Research Database (Denmark)

Trapp, M.T.; Guerniche, D.G.; Bach, M.B.

2010-01-01

was to predict initial environmental concentrations in flowing water bodies after spray drift exposure. Based on this the downstream development of these concentrations over space and time with regard to dispersion processes was simulated (PECtwa, Time over Threshold). An adequate GIS-based software......The “Georisk”- project of the German Federal Environmental Agency forms the scientific basis for an integration of more realistic landscape based scenarios into the process of pesticide registration. Here, first results of geodata-based simulations are presented. The objective of the simulations...

Determination of elemental concentrations in environmental plant samples by instrumental neutron activation analysis

International Nuclear Information System (INIS)

Datta, J.; Chowdhury, D.P.; Verma, R.; Reddy, A.V.R.

2012-01-01

The intake of leafy vegetables in daily diet is very important to meet our nutritional needs. Vegetables provide the essential elements which are necessary and recommended for human growth. However, due to rapid industrialization and urbanization our environment becomes polluted and this affects the normal growth of agricultural products and composition of environmental species. The elemental concentrations present in the environmental samples are good indicators to assess the toxicological levels due to pollution affects. In the present work we have analysed several vegetable plant samples by instrumental neutron activation analysis to determine the elemental concentrations at major, minor and trace levels. The leafy vegetables like spinach, red leafy vegetable, pui, gourd leaf, lettuce and katoua were chosen as these are extensively consumed by local people in eastern part of India. We have determined 15 elements in the above mentioned vegetable samples and some of these are essential elements and some are toxic elements. It was found that Na and K were present as major elements, Fe and Zn as minor elements and As, Ce, Cr, Co, La, Mo, Rb, Sc, Sm, Sr as trace elements. The concentration level of Cr was found to be higher than that of recommended value certified by WHO and National environment quality control for human consumption. The validation of our analytical results have been performed by the Z-score tests through the determination of concentrations of the elements of interest in certified reference materials. (author)

Final environmental assessment and Finding-of-No-Significant-Impact - drum storage facility for interim storage of materials generated by environmental restoration operations

International Nuclear Information System (INIS)

1994-09-01

The Department of Energy (DOE) has prepared an Environmental Assessment (EA), DOE/EA-0995, for the construction and operation of a drum storage facility at Rocky Flats Environmental Technology Site, Golden, Colorado. The proposal for construction of the facility was generated in response to current and anticipated future needs for interim storage of waste materials generated by environmental restoration operations. A public meeting was held on July 20, 1994, at which the scope and analyses of the EA were presented. The scope of the EA included evaluation of alternative methods of storage, including no action. A comment period from July 5, 1994 through August 4, 1994, was provided to the public and the State of Colorado to submit written comment on the EA. No written comments were received regarding this proposed action, therefore no comment response is included in the Final EA. Based on the analyses in the EA, DOE has determined that the proposed action would not significantly affect the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 (NEPA). Therefore, preparation of an Environmental Impact Statement is not required and the Department is issuing this Finding of No Significant Impact

Numerical Simulation and Experimental Study on Formation of High Concentration of H2 Generated by Gas Explosion

Directory of Open Access Journals (Sweden)

Lei Baiwei

2016-10-01

Full Text Available In coal mine fire rescues, if the abnormal increase of gas concentration occurs, it is the primary thing to analyze the reasons and identify sources of the abnormal forming, which is also the basis of judge the combustion state of fire area and formulate proper fire reliefs. Nowadays, related researches have recognized the methane explosion as the source of high concentration of H2 formation, but there are few studies about the conditions and reaction mechanism of gas explosion generating high concentration of H2.Therefore, this paper uses the chemical kinetic calculation software, ChemKin, and the 20L spherical explosion experimental device to simulate the generating process and formation conditions of H2 in gas explosion. The experimental results show that: the decomposition of water vapor is the main base element reaction (R84 which leads to the generation of H2.The free radical H is the key factor to influence the formation of H2 generated from gas explosion. With the gradual increase of gas explosion concentration, the explosive reaction becomes more incomplete, and then the generating quantity of H2 increases gradually. Experimental results of 20L spherical explosion are consistent with the change trend about simulation results, which verifies the accuracy of simulation analysis. The results of explosion experiments show that when gas concentration is higher than 9%, the incomplete reaction of methane explosion increases which leads to the gradual increase of H2 formation.

Method of estimating changes in vapor concentrations continuously generated from two-component organic solvents.

Science.gov (United States)

Hori, Hajime; Ishidao, Toru; Ishimatsu, Sumiyo

2010-12-01

We measured vapor concentrations continuously evaporated from two-component organic solvents in a reservoir and proposed a method to estimate and predict the evaporation rate or generated vapor concentrations. Two kinds of organic solvents were put into a small reservoir made of glass (3 cm in diameter and 3 cm high) that was installed in a cylindrical glass vessel (10 cm in diameter and 15 cm high). Air was introduced into the glass vessel at a flow rate of 150 ml/min, and the generated vapor concentrations were intermittently monitored for up to 5 hours with a gas chromatograph equipped with a flame ionization detector. The solvent systems tested in this study were the methanoltoluene system and the ethyl acetate-toluene system. The vapor concentrations of the more volatile component, that is, methanol in the methanol-toluene system and ethyl acetate in the ethyl acetate-toluene system, were high at first, and then decreased with time. On the other hand, the concentrations of the less volatile component were low at first, and then increased with time. A model for estimating multicomponent organic vapor concentrations was developed, based on a theory of vapor-liquid equilibria and a theory of the mass transfer rate, and estimated values were compared with experimental ones. The estimated vapor concentrations were in relatively good agreement with the experimental ones. The results suggest that changes in concentrations of two-component organic vapors continuously evaporating from a liquid reservoir can be estimated by the proposed model.

Healthcare Waste Generation Worldwide and Its Dependence on Socio-Economic and Environmental Factors

Directory of Open Access Journals (Sweden)

Minas Minoglou

2017-02-01

Full Text Available This paper examines the dependence of the healthcare waste (HCW generation rate on several social-economic and environmental parameters. Correlations were calculated between the quantities of healthcare waste generated (expressed in kg/bed/day versus economic indices (GDP, healthcare expenditure per capita, social indices (HDI, IHDI, MPI, life expectancy, mean years of schooling, HIV prevalence, deaths due to tuberculosis and malaria, and under five mortality rate, and an environmental sustainability index (total CO2 emissions from 42 countries worldwide. The statistical analysis included the examination of the normality of the data and the formation of linear multiple regression models to further investigate the correlation between those indices and HCW generation rates. Pearson and Spearman correlation coefficients were also calculated for all pairwise comparisons. Results showed that the life expectancy, the HDI, the mean years of schooling and the CO2 emissions positively affect the HCW generation rates and can be used as statistical predictors of those rates. The resulting best reduced regression model included the life expectancy and the CO2 emissions and explained 85% of the variability of the response.

pH dependence of steroid hormone-organic matter interactions at environmental concentrations

Energy Technology Data Exchange (ETDEWEB)

Neale, Peta A. [School of Engineering and Electronics, University of Edinburgh, Edinburgh, EH9 3JL (United Kingdom)], E-mail: p.neale@ed.ac.uk; Escher, Beate I. [Swiss Federal Institute of Aquatic Science and Technology (Eawag), 8600, Duebendorf (Switzerland); Schaefer, Andrea I. [School of Engineering and Electronics, University of Edinburgh, Edinburgh, EH9 3JL (United Kingdom)

2009-01-15

The interaction of estradiol, estrone, progesterone and testosterone with environmentally relevant concentrations of Aldrich humic acid, alginic acid and tannic acid was studied using solid-phase microextraction (SPME). Since bulk organic matter and certain hormones such as estradiol and estrone contain dissociable functional groups, the effect of pH on sorption was investigated as this will influence their fate and bioavailability. For humic acid and tannic acid, sorption was strongest at acidic pH when the bulk organic matter was in a non-dissociated form and decreased when they became partially negatively charged. At acidic and neutral pH the strength of partitioning was influenced by hormone functional groups content, with the strongest sorption observed for progesterone and estrone. At alkaline pH conditions, when the bulk organics were dissociated, sorption decreased considerably (up to a factor of 14), although the non-dissociated hormones testosterone and progesterone indicated greater sorption to humic acid at pH 10 compared to the partially deprotonated estradiol and estrone. This study demonstrates that SPME can be used to assess organic matter sorption behaviour of a selected range of micropollutants and at environmentally relevant organic matter concentrations.

Environmental radiation monitoring data for Point Lepreau Generating Station, 1990. Annual publication

Energy Technology Data Exchange (ETDEWEB)

Sutherland, J K

1991-01-01

Annual report presenting a compilation of the 1990 environmental radiation monitoring program data from samples collected around the Point Lepreau Nuclear Generating Station (PLNGS) and at reference stations remote from PLNGS. About 1,500 analyses were made on 1,100 samples to monitor environmental radiation, including air particulates, airborne water vapour, carbon dioxide in air, sea water, well water, milk, beach sediments, clams, fish, lobster, dulse, crabs, scallops, periwinkles, sea plants and lichen. Background radiation is measured by thermoluminescence dosimetry. Radon is not assessed.

Concentrations of heavy metals in hair as indicators of environmental pollution

Directory of Open Access Journals (Sweden)

Baran A.

2013-04-01

Full Text Available Over 80 hair samples were collected from 38% males and 62% females in Krakow, Poland. The hairs sampled for the analysis were washed in the water-acetone-water arrangement (three times. Subsequently the hair samples were wet mineralized in a closed system HNO3:H2O2 (6:1 in a microwave furnace. Concentrations of Zn, Pb and Cd were assessed by means of ICP-OES method. Obtained results of analysis of heavy metal concentrations in the hair of tested population of Krakow inhabitants evidence environmental hazard (beside professional hazardWe observed that the hair of females showed higher levels of zinc and cadmium. Hair analysis allows for an assessment of the natural environment contamination, which is particularly important for the research on populations inhabiting areas with different degree of pollution.

Environmental radiological studies conducted during 1986 in the vicinity of the Rancho Seco Nuclear Power Generating Station

International Nuclear Information System (INIS)

Noshkin, V.E.; Wong, K.M.; Eagle, R.J.; Brunk, J.L.; Jokela, T.A.

1987-03-01

This report summarizes the information compiled in 1986 for our assessment of the environmental impact of radionuclides discharged with aqueous releases from the Rancho Seco Nuclear Power Generating Plant. In October 1984, a liquid-effluent control program was initiated that significantly reduced the quantities of radionuclides discharged with liquid waste from the plant. However, results from our sampling program in 1986 indicate that previously discharged radionuclides persist in the downstream environment and are found in many aquatic dietary components although at concentrations much lower than those measured in 1984 and 1985. The greatly reduced activities in the dietary components from the aquatic environment attest to the effectiveness of the liquid-effluent control program. Concentrations in the flesh of fish from the creeks have decreased over time and with distance from the plant outfall. The mean concentration of 137 Cs in fish collected from Laguna Creek at locations more than 7.5 km from Rancho Seco is now comparable to the concentration determined in fresh-water fish randomly selected from Chicago, Illinois, markets. By August 1986, the mean concentration of 137 Cs in the flesh of bluegill had fallen to 7% of the concentration measured in fish from comparable locations in 1984 and was 30% of the mean concentration measured in these fish during August 1985. Stable potassium in the water plays a major role in the accumulation of 137 Cs by fish. Concentrations of 137 Cs in the surface sections of creek sediments also declined between the end of 1984 and 1986 with an effective half-life of approximately 2 y. Surface soils collected around a perimeter 11 km from Rancho Seco and from ranchlands closer to the plant showed only concentrations of 137 Cs originating from global fallout. Soils previously irrigated with Clay Creek water retain levels of both 134 Cs and 137 Cs

Experience on environmental qualification of safety-related components for Darlington Nuclear Generating Station

International Nuclear Information System (INIS)

Yu, A.S.; Kukreti, B.M.

1987-01-01

The proliferation of Nuclear Power Plant safety concerns has lead to increasing attention over the Environmental Qualification (EQ) of Nuclear Power Plant Safety-Related Components to provide the assurance that the safety related equipment will meet their intended functions during normal operation and postulated accident conditions. The environmental qualification of these components is also a Licensing requirement for Darlington Nuclear Generating Station. This paper provides an overview of EQ and the experience of a pilot project, in the qualification of the Main Moderator System safety-related functions for the Darlington Nuclear Generating Station currently under construction. It addresses the various phases of qualification from the identification of the EQ Safety-Related Components List, definition of location specific service conditions (normal, adbnormal and accident), safety-related functions, Environmental Qualification Assessments and finally, an EQ system summary report for the Main Moderator System. The results of the pilot project are discussed and the methodology reviewed. The paper concludes that the EQ Program developed for Darlington Nuclear Generating Station, as applied to the qualification of the Main Moderator System, contained all the elements necessary in the qualification of safety-related equipment. The approach taken in the qualification of the Moderator safety-related equipment proves to provide a sound framework for the qualification of other safety-related components in the station

Protecting the environment for future generations. Principles and actors in international environmental law

Energy Technology Data Exchange (ETDEWEB)

Proelss, Alexander (ed.) [Trier Univ. (Germany). Inst. of Environmental and Technology Law

2017-08-01

This book compiles the written versions of presentations held at the occasion of an international symposium entitled ''Protecting the Environment for Future Generations - Principles and Actors in International Environmental Law''. The symposium was organized by the Institute of Environmental and Technology Law of Trier University (IUTR) on the basis of a cooperation scheme with the Environmental Law Institute of the Johannes Kepler University Linz, Austria, and took place in Trier on 29-30 October 2015. It brought together a distinguished group of experts from Europe and abroad to address current issues of international and European environmental law. The main objective of the symposium was to take stock of the actors and principles of international and European environmental law, and to analyze how and to what extent these principles have been implemented on the supranational and domestic legal levels.

Proposed Tenaska Washington II Generation Project : Final Environmental Impact Statement. Volume 1: Environmental Analysis and Technical Appendices.

Energy Technology Data Exchange (ETDEWEB)

United States. Bonneville Power Administration.

1994-01-01

BPA is considering whether to purchase electrical power from a proposed privately-owned combustion-turbine electrical generation plant in Washington. The plant would be fired by natural gas and would use combined-cycle technology to generate 240 average megawatts (aMW) of energy. The plant would be developed, owned, and operated by Tenaska Washington Partners II, L.P. The project would be located about 19 kilometers (12 miles) southeast of downtown Tacoma in the Frederickson Industrial Area, Pierce County. The proposed plant would occupy about half of a 6.4-hectare (16-acre) parcel and would be consistent with the industrial character of its surroundings. The proposed site is currently undeveloped and zoned for industrial use by the county. Main environmental concerns identified in the scoping process and in comments on the Draft Environmental Impact Statement (EIS) include: (1) potential air quality impacts, such as emissions and their contribution to the {open_quotes}greenhouse{close_quotes} effect; (2) potential health and safety impacts, such as nuisance odors, plant safety, visibility and heat-emission systems which may affect low-flying planes and potential health effects of electric and magnetic fields; and (3) potential water quality and quantity impacts, such as the amount of wastewater to be discharged, the source and amount of water required for plant operation. These and other issues are discussed in detail in the EIS. The proposed project already includes many features designed to reduce environmental impacts. Based on investigations performed for the EIS, no significant unavoidable adverse environmental impacts associated with the proposed project were identified, and no evidence emerged to suggest that the proposed action is controversial. The EIS is being mailed to numerous agencies, groups, and individuals (see Section 8.0). There will be a 30-day no-action period before any decisions are made and the Record of Decision is signed.

Studies of post-elution concentration of {sup 99m}-Tc eluted from a gel type chromatographic generator

Energy Technology Data Exchange (ETDEWEB)

Suzuki, Katia N.; Osso Junior, Joao Alberto [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mail: norisuzuki6@yahoo.com.br; jaosso@ipen.br

2007-07-01

The radiopharmaceuticals most used in Diagnostic Nuclear Medicine are those labeled with the metastable technetium ({sup 99m}Tc) due to its ideal physical properties of decay (t{sub 1/2} 6.01 h, E{gamma} 140 keV), low cost and availability facilitated through the commercial generator {sup 99}Mo /{sup 99m}Tc. This radionuclide is formed by the {beta}{sup -} decay of {sup 99}Mo adsorbed on an alumina column of the generator and collected in the form of sodium pertechnetate (Na{sup 99m}TcO{sub 4}) by elution with saline solution (0.9%). The Radiopharmacy Center (CR) of the IPEN-CNEN/SP developed a gel type chromatographic generator of MoZr with {sup 99}Mo produced by {sup 98}Mo(n, {gamma}){sup 99}Mo reaction that occurs in IEA-R1 Nuclear Reactor. The gel is composed of zirconium molybdate with elution volume of 12 ml with an activity of 11100 MBq (300 mCi) producing a radioactive concentration of 925 MBq (34 mCi) / ml. The fission generator gives a higher radioactive concentration around 1850 MBq (69 mCi) / ml. The aim of this work is to study a system of post-elution concentration using ion exchange cartridges in tandem (cation - anion) for the attainment of a high enough radioactive concentration to meet the demand of market, with a proved quality. This system of concentration will be made based in the technique of solid phase extraction (SPE) using commercial cartridges of extraction, which contains the solid phase and eluent saline solution (0.9%). As the eluent results of this system used in the gel generator of MoZr will be compared with the fission generator currently produced by IPEN-CNEN/SP. (author)

Vulnerability of US thermoelectric power generation to climate change when incorporating state-level environmental regulations

Energy Technology Data Exchange (ETDEWEB)

Liu, Lu; Hejazi, Mohamad; Li, Hongyi; Forman, Barton; Zhang, Xiao

2017-07-10

This study explores the interactions between climate and thermoelectric generation in the U.S. by coupling an Earth System Model with a thermoelectric power generation model. We validated model simulations of power production for selected power plants (~44% of existing thermoelectric capacity) against reported values. In addition, we projected future usable capacity for existing power plants under two different climate change scenarios. Results indicate that climate change alone may reduce average thermoelectric generating capacity by 2%-3% by the 2060s. Reductions up to 12% are expected if environmental requirements are enforced without waivers for thermal variation. This study concludes that the impact of climate change on the U.S. thermoelectric power system is less than previous estimates due to an inclusion of a spatially-disaggregated representation of environmental regulations and provisional variances that temporarily relieve power plants from permit requirements. This work highlights the significance of accounting for legal constructs in which the operation of power plants are managed, and underscores the effects of provisional variances in addition to environmental requirements.

Multi-Generation Concentrating Solar-Hydrogen Power System for Sustainable Rural Development

Energy Technology Data Exchange (ETDEWEB)

Krothapalli, A.; Greska, B.

2007-07-01

This paper describes an energy system that is designed to meet the demands of rural populations that currently have no access to grid-connected electricity. Besides electricity, it is well recognized that rural populations need at least a centralized refrigeration system for storage of medicines and other emergency supplies, as well as safe drinking water. Here we propose a district system that will employ a multi-generation concentrated solar power (CSP) system that will generate electricity and supply the heat needed for both absorption refrigeration and membrane distillation (MD) water purification. The electricity will be used to generate hydrogen through highly efficient water electrolysis and individual households can use the hydrogen for generating electricity, via affordable proton exchange membrane (PEM) fuel cells, and as a fuel for cooking. The multi-generation system is being developed such that its components will be easy to manufacture and maintain. As a result, these components will be less efficient than their typical counterparts but their low cost-to-efficiency ratio will allow for us to meet our installation cost goal of $1/Watt for the entire system. The objective of this paper is to introduce the system concept and discuss the system components that are currently under development. (auth)

75 FR 52045 - Arizona Public Service Company, Palo Verde Nuclear Generating Station, Unit 3; Environmental...

Science.gov (United States)

2010-08-24

... Company, Palo Verde Nuclear Generating Station, Unit 3; Environmental Assessment and Finding of No.... NPF-74, issued to Arizona Public Service Company (APS, the licensee), for operation of Palo Verde... Statement for the Palo Verde Nuclear Generating Station, NUREG-0841, dated February 1982. Agencies and...

Environmental and economic appraisal of power generation capacity expansion plan in Nigeria

International Nuclear Information System (INIS)

Gujba, H.; Mulugetta, Y.; Azapagic, A.

2010-01-01

The power sector in Nigeria is undergoing structural reforms aimed at improving and expanding the current grid generation capacity and distribution network. The Government has injected huge funds into this sector while also granting licences to private companies for the provision of electricity. It is also aiming to increase electricity generation capacity to 25,000 MW by 2020 from the current installed capacity of 6500 MW while also pledging to connect 75% of the population to the grid from the current 40% by 2025. This paper sets out to analyse the implications of the energy policy in Nigeria and presents the life cycle environmental and economic analysis of the current and future electricity sector. The results show that all the life cycle impacts and economic costs increase significantly over the time-period (2003-2030), but at different rates depending on the types of technologies deployed. Renewables such as large hydro and solar proposed by the Government have a potential to reduce the overall life cycle environmental impacts from the electricity mix, considering their lower environmental impacts compared to fossil-fuels. However, this requires a five-fold increase in grid investments from the current US$1.7 billion per year to US$9.40 billion by 2030.

Molecular toxicity of cerium oxide nanoparticles to the freshwater alga Chlamydomonas reinhardtii is associated with supra-environmental exposure concentrations

Science.gov (United States)

Taylor, Nadine S.; Merrifield, Ruth; Williams, Tim D.; Chipman, J. Kevin; Lead, Jamie R.; Viant, Mark R.

2016-01-01

Abstract Ceria nanoparticles (NPs) are widely used as fuel catalysts and consequently are likely to enter the environment. Their potential impacts on. biota at environmentally relevant concentrations, including uptake and toxicity, remain to be elucidated and quantitative data on which to assess risk are sparse. Therefore, a definitive assessment of the molecular and phenotypic effects of ceria NPs was undertaken, using well-characterised mono-dispersed NPs as their toxicity is likely to be higher, enabling a conservative hazard assessment. Unbiased transcriptomics and metabolomics approaches were used to investigate the potential toxicity of tightly constrained 4–5 nm ceria NPs to the unicellular green alga, Chlamydomonas reinhardtii, a sentinel freshwater species. A wide range of exposure concentrations were investigated from predicted environmental levels, to support hazard assessment, to supra-environmental levels to provide insight into molecular toxicity pathways. Ceria NPs were internalised into intracellular vesicles within C. reinhardtii, yet caused no significant effect on algal growth at any exposure concentration. Molecular perturbations were only detected at supra-environmental ceria NP-concentrations, primarily down-regulation of photosynthesis and carbon fixation with associated effects on energy metabolism. For acute exposures to small mono-dispersed particles, it can be concluded there should be little concern regarding their dispersal into the environment for this trophic level. PMID:25740379

Public comments on the draft generic environmental impact statement for management of commercially generated radioactive waste

International Nuclear Information System (INIS)

Kreiter, M.R.; Unruh, C.M.; McCallum, R.F.

1980-01-01

The US Department of Energy has the responsibility for developing the technology required for managing commercial radioactive wastes in an environmentally acceptable manner. As part of this responsibility, DOE has prepared a draft environmental impact statement on the management of commercially generated radioactive waste. The draft was issued for public comment in April of 1979; five public hearings were held. The draft GEIS is intended to provide environmental input for the selection of an appropriate program strategy for the permanent isolation of commercially generated high-level and transuranic wastes. The scope of such a strategy includes research and development into alternative treatment processes and emplacement media, site investigations into candidate media, and the examination of advanced waste management technologies. The draft statement describes the commercial radioactive wastes that would have to be managed for very long periods of time from an assumed nuclear generation scenario of 10,000 GWe-yr of power over a 65-year period ending in 2040

Does environmental regulation affect energy efficiency in China's thermal power generation? Empirical evidence from a slacks-based DEA model

International Nuclear Information System (INIS)

Bi, Gong-Bing; Song, Wen; Zhou, P.; Liang, Liang

2014-01-01

Data envelopment analysis (DEA) has gained much popularity in performance measurement of power industry. This paper presents a slack-based measure approach to investigating the relationship between fossil fuel consumption and the environmental regulation of China's thermal power generation. We first calculate the total-factor energy efficiency without considering environmental constraints. An environmental performance indicator is proposed through decomposing the total-factor energy efficiency. The proposed approach is then employed to examine whether environmental regulation affects the energy efficiency of China's thermal power generation. We find that the environmental efficiency plays a significant role in affecting energy performance of China's thermal generation sector. Decreasing the discharge of major pollutants can improve both energy performance and environmental efficiency. Besides, we also have three main findings: (1) The energy efficiency and environmental efficiency were relatively low. (2) The energy and environmental efficiency scores show great variations among provinces. (3) Both energy efficiency and environmental efficiency are of obvious geographical characteristics. According to our findings, we suggest some policy implications. - Highlights: • We assess the energy efficiency and the environmental efficiency of China's thermal power generation simultaneously. • The energy efficiency and the environmental efficiency were relatively low during 2007–2009. • The energy efficiency and environmental efficiency show obvious geographic characters. • The environmental performance of a DMU plays a decisive role in the energy performance

Low-level waste inventory, characteristics, generation, and facility assessment for treatment, storage, and disposal alternatives considered in the US Department of Energy waste management programmatic environmental impact statement

Energy Technology Data Exchange (ETDEWEB)

Goyette, M.L.; Dolak, D.A.

1996-12-01

This report provides technical support information for use in analyzing environmental impacts associated with U.S. Department of Energy (DOE) low-level radioactive waste (LLW) management alternatives in the Waste-Management (WM) Programmatic Environmental Impact Statement (PEIS). Waste loads treated and disposed of for each of the LLW alternatives considered in the DOE WM PEIS are presented. Waste loads are presented for DOE Waste Management (WM) wastes, which are generated from routine operations. Radioactivity concentrations and waste quantities for treatment and disposal under the different LLW alternatives are described for WM waste. 76 refs., 14 figs., 42 tabs.

The environmental interactions of tidal and wave energy generation devices

OpenAIRE

Frid, C.; Andonegi, E.; Depestele, J.; Judd, A.; Rihan, D.; Rogers, S.I.; Kenchington, E.

2012-01-01

Global energy demand continues to grow and tidal and wave energy generation devices can provide a significant source of renewable energy. Technological developments in offshore engineering and the rising cost of traditional energy means that offshore energy resources will be economic in the next few years. While there is now a growing body of data on the ecological impacts of offshore wind farms, the scientific basis on which to make informed decisions about the environmental effects of other...

Modelling and exergoeconomic-environmental analysis of combined cycle power generation system using flameless burner for steam generation

International Nuclear Information System (INIS)

Hosseini, Seyed Ehsan; Barzegaravval, Hasan; Ganjehkaviri, Abdolsaeid; Wahid, Mazlan Abdul; Mohd Jaafar, M.N.

2017-01-01

Highlights: • Using flameless burner as a supplementary firing system after gas turbine is modeled. • Thermodynamic, economic and environmental analyses of this model are performed. • Efficiency of the plant increases about 6% and CO_2 emission decreases up to 5.63% in this design. • Available exergy for work production in both gas cycle and steam cycle increases in this model. - Abstract: To have an optimum condition for the performance of a combined cycle power generation, using supplementary firing system after gas turbine was investigated by various researchers. Since the temperature of turbine exhaust is higher than auto-ignition temperature of the fuel in optimum condition, using flameless burner is modelled in this paper. Flameless burner is installed between gas turbine cycle and Rankine cycle of a combined cycle power plant which one end is connected to the outlet of gas turbine (as primary combustion oxidizer) and the other end opened to the heat recovery steam generator. Then, the exergoeconomic-environmental analysis of the proposed model is evaluated. Results demonstrate that efficiency of the combined cycle power plant increases about 6% and CO_2 emission reduces up to 5.63% in this proposed model. It is found that the variation in the cost is less than 1% due to the fact that a cost constraint is implemented to be equal or lower than the design point cost. Moreover, exergy of flow gases increases in all points except in heat recovery steam generator. Hence, available exergy for work production in both gas cycle and steam cycle will increase in new model.

Hydro-Thermal-Wind Generation Scheduling Considering Economic and Environmental Factors Using Heuristic Algorithms

Directory of Open Access Journals (Sweden)

Suresh K. Damodaran

2018-02-01

Full Text Available Hydro-thermal-wind generation scheduling (HTWGS with economic and environmental factors is a multi-objective complex nonlinear power system optimization problem with many equality and inequality constraints. The objective of the problem is to generate an hour-by-hour optimum schedule of hydro-thermal-wind power plants to attain the least emission of pollutants from thermal plants and a reduced generation cost of thermal and wind plants for a 24-h period, satisfying the system constraints. The paper presents a detailed framework of the HTWGS problem and proposes a modified particle swarm optimization (MPSO algorithm for evolving a solution. The competency of selected heuristic algorithms, representing different heuristic groups, viz. the binary coded genetic algorithm (BCGA, particle swarm optimization (PSO, improved harmony search (IHS, and JAYA algorithm, for searching for an optimal solution to HTWGS considering economic and environmental factors was investigated in a trial system consisting of a multi-stream cascaded system with four reservoirs, three thermal plants, and two wind plants. Appropriate mathematical models were used for representing the water discharge, generation cost, and pollutant emission of respective power plants incorporated in the system. Statistical analysis was performed to check the consistency and reliability of the proposed algorithm. The simulation results indicated that the proposed MPSO algorithm provided a better solution to the problem of HTWGS, with a reduced generation cost and the least emission, when compared with the other heuristic algorithms considered.

Ensuring comparability of data generated by multiple analytical laboratories for environmental decision making at the Fernald Environmental Management Project

International Nuclear Information System (INIS)

Sutton, C.; Campbell, B.A.; Danahy, R.J.; Dugan, T.A.; Tomlinson, F.K.

1994-01-01

The Fernald Environmental Management Project is a US Department of Energy (DOE)-owned facility located 17 miles northwest of Cincinnati, Ohio. From 1952 until 1989, the Fernald site provided high-purity uranium metal products to support US defense programs. In 1989 the mission of Fernald changed from one of uranium production to one of environmental restoration. At Fernald, multiple functional programs require analytical data. Inorganic and organic data for these programs are currently generated by seven laboratories, while radiochemical data are being obtained from six laboratories. Quality Assurance (QA) and Quality Control (QC) programs have been established to help ensure comparability of data generated by multiple laboratories at different times. The quality assurance program for organic and inorganic measurements specifies which analytical methodologies and sample preparation procedures are to be used based on analyte class, sample matrix, and data quality requirements. In contrast, performance specifications have been established for radiochemical analyses. A blind performance evaluation program for all laboratories, both on-site and subcontracted commercial laboratories, provides continuous feedback on data quality. The necessity for subcontractor laboratories to participate in the performance evaluation program is a contractual requirement. Similarly, subcontract laboratories are contractually required to generate data which meet radiochemical performance specifications. The Fernald on-site laboratory must also fulfill these requirements

Waste Generation Forecast for DOE-ORO's Environmental Restoration OR-1 Project: FY 1994--FY 2001

International Nuclear Information System (INIS)

1993-12-01

This Waste Generation Forecast for DOE-ORO's Environmental Restoration OR-1 Project. FY 1994--FY 2001 is the third in a series of documents that report current estimates of the waste volumes expected to be generated as a result of Environmental Restoration activities at Department of Energy, Oak Ridge Operations Office (DOE-ORO), sites. Considered in the scope of this document are volumes of waste expected to be generated as a result of remedial action and decontamination and decommissioning activities taking place at these sites. Sites contributing to the total estimates make up the DOE-ORO Environmental Restoration OR-1 Project: the Oak Ridge K-25 Site, the Oak Ridge National Laboratory, the Y-12 Plant, the Paducah Gaseous Diffusion Plant, the Portsmouth Gaseous Diffusion Plant, and the off-site contaminated areas adjacent to the Oak Ridge facilities (collectively referred to as the Oak Ridge Reservation Off-Site area). Estimates are available for the entire fife of all waste generating activities. This document summarizes waste estimates forecasted for the 8-year period of FY 1994-FY 2001. Updates with varying degrees of change are expected throughout the refinement of restoration strategies currently in progress at each of the sites. Waste forecast data are relatively fluid, and this document represents remediation plans only as reported through September 1993

Environmental aspects of electricity generation from a nanocrystalline dye sensitized solar cell system

International Nuclear Information System (INIS)

Greijer, Helena; Karlson, Lennart; Lindquist, Sten-Eric; Hagfeldt, Anders

2001-01-01

A Life Cycle Assessment, LCA, of a nanocrystalline dye sensitised solar cell (ncDSC) system has been performed, according to the ISO14040 standard. In brief, LCA is a tool to analyse the total environment impact of a product or system from cradle to grave. Six different weighing methods were used to rank and select the significant environmental aspects to study further. The most significant environmental aspects according to the weighing methods are emission of sulphur dioxide and carbon dioxide. Carbon dioxide emission was selected as the environmental indicator depending on the growing attention on the global warming effect. In an environmental comparison of electricity generation from a ncDSC system and a natural gas/combined cycle power plant, the gas power plant would result in 450 g CO 2 /kWh and the ncDSC system in between 19-47 g CO 2 /wWh. The latter can be compared with 42 g CO 2 /kWh, according to van Brummelen et al. 'Life Cycle Assessment of Roof Integrated Solar Cell Systems, (Report: Department of Science, Technology and Society, Utrecht University, The Netherlands, 1994)' for another thin film solar cell system made of amorphous silicon. The most significant activity/component contributing to environmental impact over the life cycle of the ncDSC system is the process energy for producing the solar cell module. Secondly comes the components; glass substrate, frame and junction box. The main improvement from an environmental point of view of the current technology would be an increase in the conversion efficiency from solar radiation to electricity generation and still use low energy demanding production technologies. Also the amount of material in the solar cell system should be minimised and designed to maximise recycling. (Author)

Developments in, and environmental impacts of, electricity generation from municipal solid waste and landfill gas combustion

International Nuclear Information System (INIS)

Porteous, A.

1993-01-01

The 1991 NFFO allocations for renewable energy generation are reviewed with emphasis on electricity from municipal solid waste (MSW) and landfill gas (LFG) combustion tranches. The implications of materials recovery on the calorific value of MSW are considered, as are the environmental impacts of both MSW and LFG combustion with special reference to air pollutant emissions. The performance and economics of state of the art incineration and LFG power generating plants are examined. It is shown that energy recovery from these wastes can be both cost effective and environmentally desirable. (Author)

Environmental impact of fossil fuel utilization in the thermal power plant

International Nuclear Information System (INIS)

Ghasem D Najafpour; Seyed Jafar Mehdizadeh; Abdul Rahman Mohamed

2000-01-01

Carbon dioxide causes green house effect, has been considered as a pollutant source of our safe environment. Since combustion of fossil fuel may create tremendous amount of carbon dioxide, detecting any pollutant sources would be important to eliminate the pollution sources. Evaluation of smoke dispersion that has been generated by a power plant utilizing fossil fuel is the objective of this paper. The concentration of NO, and SO, in the soil, have been analyzed from a distance of 3 to 4 km far from power plant. The experimental results shown. that the concentration of toxic gases was a little above the international standards. Replacement of fossil fuel by natural gas caused NO, concentration to be developed in the atmosphere, therefore usage of natural gas is limited by environmental protection agencies. Beside the nuclear power plant, the power generated by other sources. are limited. Electric power generated by water dam is not a major contribution of electric power demand. Therefore generation of electricity by any other energy sources, which are friendly to the environment, is recommended. Other sources of energy, such as wind power, solar energy, geothermal, ocean thennal and renewable source of energy can be considered safe for the environment. The goal of environmental management system would be to meet the minimum requirements were established and demanded by the local environmental protection agency or international standard organization (ISO-14000). (Author)

Drainage from coal mines: Chemistry and environmental problems

International Nuclear Information System (INIS)

Wildeman, T.

1991-01-01

Much of the research on coal-mine drainage chemistry was conducted a decade ago, and now increased environmental awareness has brought about renewed interest in the findings. Consideration of the trace minerals and elements in coal points to the possible generation of acidic waters upon weathering, especially when pyrite is present. When pyrite weathers, it produces H + and Fe 3+ which catalyze the incongruent weathering of other carbonates and sulfides. In this weathering mechanism, catalysis by bacteria is important. Of the environmental problems in coal mine drainage, the mineral acidity of the water is the most serious. This is caused not only by the H + , but also by Mn 4+ , Fe 3+ , and Al 3+ that are found or generated within the drainage. Case studies in Kentucky, Pennsylvania, Illinois, and Colorado show that the abundance and form of pyrite in the deposit and in the overburden determines the level of acidity and the concentration of heavy metal pollutants in the drainage. Recent trends in environmental enforcement that emphasize integrated stream water standards and biotoxicity assays point to the possibility that the concentrations of heavy metals in coal mine drainages may cause environmental concern

Updating Environmental Media Concentration Limits and Uncertainty factors in the ERICA Tool

Energy Technology Data Exchange (ETDEWEB)

Brown, J.E.; Hosseini, A. [Norwegian Radiation Protection Authority, P.O. Box 55, N-1332 Oesteraas (Norway); Alfonso, B.; Avila, R. [Facilia AB, S-167 51 Bromma (Sweden); Beresford, N.A. [Centre for Ecology and Hydrology, CEH-Lancaster, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster LA 1 4AP (United Kingdom); Copplestone, D. [Dept. Biological and Environmental Sciences, University of Stirling, Stirling, FK9 4LA (United Kingdom)

2014-07-01

Tiered approaches have become a standard means of structuring information in the process of conducting environmental risk assessments. For cases involving the assessment of impacts on wildlife from ionising radiation, the ERICA integrated approach and its supporting software (The ERICA Tool) provides such a structure, splitting the system into two generic screening tiers and a third site-specific tier. The first Tier is very simple, based around Environmental Media Concentration Limits, EMCLs, and requires minimal input from the assessor. The second Tier, although still a screening tier, calculates dose rates and requires more detailed input from the assessor allowing for scrutiny and editing of default parameters in the process. A key element of Tier 2 involves the application of Uncertainty Factors, UFs. Such factors reflect our knowledge concerning probability distribution functions and provide a way of incorporating conservatism into the assessment by considering high percentile values in underlying parameters. Following its launch in 2007, there have been significant developments regarding certain components of the ERICA integrated approach. Most notably, an extended international collation of concentration ratio data has precipitated the need to update parameter values in the Tools databases. In addition, more considered guidance has been developed with regards to filling knowledge gaps in the absence of transfer data. Furthermore, the efficacy of the methods used in assigning probability distribution functions has been questioned leading to an acknowledgement from the developers that the methods were not described in enough detail nor were the justifications for applying the selected approach provided in a convincing way. This has implications for the EMCL values which are derived probabilistically using parameters including concentration ratios. Furthermore, there are implications for UF derivation that relies upon a robust consideration of underlying

Assessment of environmental external effects in power generation

International Nuclear Information System (INIS)

Meyer, H.; Morthorst, P.E.; Schleisner, L.; Meyer, N.I.; Nielsen, P.S.; Nielsen, V.

1996-12-01

This report summarises some of the results achieved in a project carried out in Denmark in 1994 concerning externalities. The main objective was to identify, quantify and - if possible - monetize the external effects in the production of energy, especially in relation to renewable technologies. The report compares environmental externalities in the production of energy using renewable and non-renewable energy sources, respectively. The comparison is demonstrated on two specific case studies. The first case is the production of electricity based on wind power plants compared to the production of electricity based on a coal-fired conventional plant. In the second case heat/power generation by means of a combined heat and power plant based on biomass-generated gas is compared to that of a combined heat and power plant fuelled by natural gas. In the report the individual externalities from the different ways of producing energy are identified, the stress caused by the effect is assessed, and finally the monetary value of the damage is estimated. The method is applied to the local as well as the regional and global externalities. (au) 8 tabs., 7 ills., 4 refs

Assessment of environmental external effects in power generation

Energy Technology Data Exchange (ETDEWEB)

Meyer, H.; Morthorst, P.E.; Schleisner, L. [Risoe National Lab. (Denmark); Meyer, N.I.; Nielsen, P.S.; Nielsen, V. [The Technical Univ. of Denmark (Denmark)

1996-12-01

This report summarises some of the results achieved in a project carried out in Denmark in 1994 concerning externalities. The main objective was to identify, quantify and - if possible - monetize the external effects in the production of energy, especially in relation to renewable technologies. The report compares environmental externalities in the production of energy using renewable and non-renewable energy sources, respectively. The comparison is demonstrated on two specific case studies. The first case is the production of electricity based on wind power plants compared to the production of electricity based on a coal-fired conventional plant. In the second case heat/power generation by means of a combined heat and power plant based on biomass-generated gas is compared to that of a combined heat and power plant fuelled by natural gas. In the report the individual externalities from the different ways of producing energy are identified, the stress caused by the effect is assessed, and finally the monetary value of the damage is estimated. The method is applied to the local as well as the regional and global externalities. (au) 8 tabs., 7 ills., 4 refs.

STAKEHOLDER OPINION-BASED COMPARISON OF LIFE CYCLE ENVIRONMENTAL IMPACTS OF ELECTRICITY GENERATION IN TURKEY WITH SELECTED EUROPEAN COUNTRIES

Directory of Open Access Journals (Sweden)

Gorkem Uctug

2017-03-01

Full Text Available The life cycle environmental impacts of electricity generation in Turkey were compared to those of Denmark, France, and Poland. The reason for selecting these particular countries for benchmarking was the fact that electricity generation in these countries is dominated mostly by a single source, that is wind, nuclear, and coal, respectively. OpenLCA software and European Life Cycle Database database were used, CML2001 method was employed. The life cycle analysis approach was from cradle to grave. The environmental impact criteria which were studied were acidification, global warming potential, depletion of abiotic resources – elements, depletion of abiotic resources - fossil fuels, eutrophication, freshwater aquatic ecotoxicity, human toxicity, marine aquatic ecotoxicity, ozone layer depletion, photochemical oxidation, and terrestrial ecotoxicity. In addition to comparing the four countries in terms of these individual impacts, the overall environmental impact scores for all countries were calculated, once with equal weights for all impacts and once with weights which were determined by acquiring the stakeholder opinions via an online questionnaire. In both cases, Poland turned out to have the highest environmental impact due to the high share coal in the electricity mix, and Turkey came second after Poland. Equal-weight-analysis returned Denmark as the country with the cleanest electricity generation infrastructure whereas stakeholder-weight-analysis results showed that it was France who had the lowest environmental impact. This result was attributed to the high weight of global warming potential and France’s nuclear-energy-based electricity generation system has a very low global warming potential when compared to other three countries. It was concluded that the prospective addition of nuclear energy, solar energy, and clean coal technologies into Turkey’s electricity mix shall reduce the overall environmental impact of electricity

Environmental impact statement on management of commercially generated radioactive wastes

International Nuclear Information System (INIS)

Shupe, M.W.; Kreiter, M.R.

1979-01-01

This report describes the generic environmental impact statement on the management of generated high-level and transuranic radioactive wastes. The contents of the statement are summarized. The alternatives considered include: geologic disposal; chemical resynthesis; very deep hole disposal; rock melting concept; island disposal; subseabed disposal; icesheet disposal; reverse well disposal; transmutation treatment; and space disposal concepts. The types and quantities of wastes considered are from 3 different fuel cycles for the LWR reactor: once through; uranium-only recycle; and uranium and platinum recycle

The environmental paradox in generation: How South America is gradually becoming more dependent on thermal generation

International Nuclear Information System (INIS)

Arango, Santiago; Larsen, Erik R.

2010-01-01

There has been an increasing focus on global warming, emission of green house gases (GHG), and the problems this might create. In this article, we review the trend in sustainable and renewable electricity generation in South America, where the generation portfolio increasingly depends on thermal generation, in particular gas. South America is a region that has relatively low emissions, but the current development is not desirable in environmental terms. We analyze the underlying reasons for this development, which is related to security of supply, deregulation, and the cost of renewable energy. We review and discuss the policies to promote renewables in the region. We analyze the potential advantages and drawbacks of different types of market interventions, such as direct subsidies that create potentially strong market distortions, more sophisticated market interventions that might be less intrusive but not necessarily as effective as, e.g. firm energy markets. We also review market-based solutions such as the Clean Market Mechanism and its potential, and the use of renewable electricity in non-interconnected zones, which might be one of the most economically attractive applications of renewables. However, without a stronger and more aggressive intervention from the governments in the region it is unlikely that the increase in thermal generation can be stopped. (author)

Benchmarking Environmental Impacts of Peat Use for Electricity Generation in Ireland—A Life Cycle Assessment

Directory of Open Access Journals (Sweden)

Fionnuala Murphy

2015-05-01

Full Text Available The combustion of peat for energy generation accounts for approximately 4.1% of Ireland’s overall greenhouse gas (GHG emissions, with current levels of combustion resulting in the emission of 2.8 Mt of CO2 per annum. The aim of this research is to evaluate the life cycle environmental impacts of peat use for energy generation in Ireland, from peatland drainage and industrial extraction, to transportation, combustion, and subsequent after-use of the cutaway area, utilising Irish-specific emission factors. The environmental impacts considered are global warming potential, acidification potential, and eutrophication potential. In addition, the cumulative energy demand of the system is evaluated. Previous studies on the environmental impact of peat for energy in Ireland relied on default Intergovernmental Panel on Climate Change (IPCC emission factors (EFs. This research utilises Irish-specific EFs and input data to reduce uncertainty associated with the use of default IPCC EFs, and finds that using default IPCC EFs overestimates the global warming potential when compared to Irish-specific EFs by approximately 2%. The greatest contribution to each of the environmental impacts considered arises from emissions generated during peat combustion, which accounts for approximately 95% of each of the environmental impact categories considered. Other stages of the life-cycle, such as impacts emanating from the peat extraction area, fossil fuel usage in harvesting and transportation machinery, and after-use of the cutaway area have much smaller effects on overall results. The transformation of cutaway peatlands to different after-use alternatives has the potential to mitigate some of the effects of peatland degradation and peat combustion.

Generation of high-titer viral preparations by concentration using successive rounds of ultracentrifugation

Directory of Open Access Journals (Sweden)

Ichim Christine V

2011-08-01

Full Text Available Abstract Background Viral vectors provide a method of stably introducing exogenous DNA into cells that are not easily transfectable allowing for the ectopic expression or silencing of genes for therapeutic or experimental purposes. However, some cell types, in particular bone marrow cells, dendritic cells and neurons are difficult to transduce with viral vectors. Successful transduction of such cells requires preparation of highly concentrated viral stocks, which permit a high virus concentration and multiplicity of infection (MOI during transduction. Pseudotyping with the vesicular stomatitis virus G (VSV-G envelope protein is common practice for both lentiviral and retroviral vectors. The VSV-G glycoprotein adds physical stability to retroviral particles, allowing concentration of virus by high-speed ultracentrifugation. Here we describe a method report for concentration of virus from large volumes of culture supernatant by means of successive rounds of ultracentrifugation into the same ultracentrifuge tube. Method Stable retrovirus producer cell lines were generated and large volumes of virus-containing supernatant were produced. We then tested the transduction ability of virus following varying rounds of concentration by ultra-centrifugation. In a second series of experiments lentivirus-containing supernatant was produced by transient transfection of 297T/17 cells and again we tested the transduction ability of virus following multiple rounds of ultra-centrifugation. Results We report being able to centrifuge VSV-G coated retrovirus for as many as four rounds of ultracentrifugation while observing an additive increase in viral titer. Even after four rounds of ultracentrifugation we did not reach a plateau in viral titer relative to viral supernatant concentrated to indicate that we had reached the maximum tolerated centrifugation time, implying that it may be possible to centrifuge VSV-G coated retrovirus even further should it be necessary

Environmental effects of the electric power generation

International Nuclear Information System (INIS)

Velez Ocon, C.

1991-01-01

Every manner to generate electricity has effects on environment and on the way of life of human society. Nevertheless electricity is a way of secondary energy handy and clean and is also frequently the more efficient, and for its reason its use is growing in countries with a rate superior to the increase in national gross product. This is particularly remarkable in Mexico where still exist population sectors without electricity services and where the demand per capita is left behind with respect to other economic indicators. In the last years, preoccupation for environmental effects in human activities, especially that related with the production and use of energy, has been increasing. 'Acid rain', air and water pollution, destruction of stratospheric ozone layer, global heating, radioactive wastes storage, land use, destruction of tropical forest, inundation of archaeological ruins, extintion of animal and vegetable species, are examples of problems daily expound to society (Author)

Minimum inhibitory concentration distribution in environmental Legionella spp. isolates.

Science.gov (United States)

Sandalakis, Vassilios; Chochlakis, Dimosthenis; Goniotakis, Ioannis; Tselentis, Yannis; Psaroulaki, Anna

2014-12-01

In Greece standard tests are performed in the watering and cooling systems of hotels' units either as part of the surveillance scheme or following human infection. The purpose of this study was to establish the minimum inhibitory concentration (MIC) distributions of environmental Legionella isolates for six antimicrobials commonly used for the treatment of Legionella infections, by MIC-test methodology. Water samples were collected from 2004 to 2011 from 124 hotels from the four prefectures of Crete (Greece). Sixty-eight (68) Legionella isolates, comprising L. pneumophila serogroups 1, 2, 3, 5, 6, 8, 12, 13, 15, L. anisa, L. rubrilucens, L. maceachernii, L. quinlivanii, L. oakridgensis, and L. taurinensis, were included in the study. MIC-tests were performed on buffered charcoal yeast extract with α-ketoglutarate, L-cysteine, and ferric pyrophosphate. The MICs were read after 2 days of incubation at 36 ± 1 °C at 2.5% CO2. A large distribution in MICs was recorded for each species and each antibiotic tested. Rifampicin proved to be the most potent antibiotic regardless of the Legionella spp.; tetracycline appeared to have the least activity on our environmental isolates. The MIC-test approach is an easy, although not so cost-effective, way to determine MICs in Legionella spp. These data should be kept in mind especially since these Legionella species may cause human disease.

Electro-oxidation of reverse osmosis concentrates generated in tertiary water treatment.

Science.gov (United States)

Pérez, G; Fernández-Alba, A R; Urtiaga, A M; Ortiz, I

2010-05-01

This work investigates the application of the electro-oxidation technology provided with boron doped diamond (BDD), an electrode material which has shown outstanding properties in oxidation of organic and inorganic compounds, for the treatment of reverse osmosis (RO) concentrates generated in tertiary wastewater treatment plants (WWTP). Chemical oxygen demand (COD), ammonium and several anions were measured during the electro-oxidation process, and the influence of the applied current density (20-200A/m(2)) was analysed on process kinetics. Analytical assessment showed that several emerging pollutants (pharmaceuticals, personal care products, stimulants, etc.) were presented both in the effluent of the secondary WWTP as well as in the RO concentrate. For this reason, a group of 10 emerging pollutants, those found with higher concentrations, was selected in order to test whether electro-oxidation can be also applied for their mitigation. In the removal of emerging pollutants the electrical current density in the range 20-100A/m(2) did not show influence likely due to the mass transfer resistance developed in the process when the oxidized solutes are present in such low concentrations. Their removal rates were fitted to first order expressions, and the apparent kinetic constants for the anodic oxidation of each compound were calculated. Finally, the formation of trihalomethanes (THMs) has been checked; concluding that after selecting the appropriate operational conditions the attained concentration is lower than the standards for drinking water established in European and EPA regulations. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Electric power generated by fossil fuels: Impact and environmental administration at global and local level

International Nuclear Information System (INIS)

Moscarella, John Paul

1999-01-01

An analysis is presented on the derived environmental implications of the current and future structure in the electric power market at international level. The reduced prices of the hydrocarbons determine that the fossil electricity is imposed on other generation forms, that which generates serious challenges to the companies and the governments as regards control and handling of gases emissions. By means of a comparative sample of eight electric companies of developed countries and in development, the tendencies are evaluated in the local and regional markets, as well as the environmental effects of different generating systems of electricity. The mechanism of well-known market is analyzed as activities implemented jointly (AIJ) referred to activities to be implemented jointly to combat the greenhouse gases effect. It concludes that in the short and medium term the conditions of the market will continue favoring the generation of fossil energy, reason why they should strengthen mechanisms of the climatic change control and to impel toward the long term the development of renewable and alternative energy

Isotropically etched radial micropore for cell concentration, immobilization, and picodroplet generation.

Science.gov (United States)

Perroud, Thomas D; Meagher, Robert J; Kanouff, Michael P; Renzi, Ronald F; Wu, Meiye; Singh, Anup K; Patel, Kamlesh D

2009-02-21

To enable several on-chip cell handling operations in a fused-silica substrate, small shallow micropores are radially embedded in larger deeper microchannels using an adaptation of single-level isotropic wet etching. By varying the distance between features on the photolithographic mask (mask distance), we can precisely control the overlap between two etch fronts and create a zero-thickness semi-elliptical micropore (e.g. 20 microm wide, 6 microm deep). Geometrical models derived from a hemispherical etch front show that micropore width and depth can be expressed as a function of mask distance and etch depth. These models are experimentally validated at different etch depths (25.03 and 29.78 microm) and for different configurations (point-to-point and point-to-edge). Good reproducibility confirms the validity of this approach to fabricate micropores with a desired size. To illustrate the wide range of cell handling operations enabled by micropores, we present three on-chip functionalities: continuous-flow particle concentration, immobilization of single cells, and picoliter droplet generation. (1) Using pressure differentials, particles are concentrated by removing the carrier fluid successively through a series of 44 shunts terminated by 31 microm wide, 5 microm deep micropores. Theoretical values for the concentration factor determined by a flow circuit model in conjunction with finite volume modeling are experimentally validated. (2) Flowing macrophages are individually trapped in 20 microm wide, 6 microm deep micropores by hydrodynamic confinement. The translocation of transcription factor NF-kappaB into the nucleus upon lipopolysaccharide stimulation is imaged by fluorescence microscopy. (3) Picoliter-sized droplets are generated at a 20 microm wide, 7 microm deep micropore T-junction in an oil stream for the encapsulation of individual E. coli bacteria cells.

Environmentally assisted fatigue evaluation model of alloy 690 steam generator tube in high temperature water

International Nuclear Information System (INIS)

Tan Jibo; Wu Xinqiang; Han Enhou; Wang Xiang; Liu Xiaoqiang; Xu Xuelian

2015-01-01

Nickel-based alloy 690 has been widely used as steam generator tube in light water reactor (LWR) nuclear power plants, which may suffer from corrosion fatigue during long-term service. Many researches and operating experience indicated that the effect of LWR environment could significantly reduce the fatigue life of structural materials. However. such an environmental degradation effect was not fully addressed in the current ASME code design fatigue curves. Therefore, the Regulatory Guide 1.207 issued by US NRC required a new NPP have to incorporate the environment effects into fatigue analyses. In the last few decades, researchers in USA and Japan systematically investigated the corrosion fatigue behavior of nuclear-grade structural materials in LWR environment. Then, ANL model and JSME model were proposed, which incorporated environmental effects, including temperature, dissolved oxygen (DO) and strain rate for the nickel-based alloys. Due to lack of experiment data on domestic materials, there is no related environmental fatigue design model in China. In the present work, based on the corrosion fatigue tests of a kind of boat-shaped specimen in borated and lithiated high temperature water, the corrosion fatigue behavior and environmentally assisted cracking mechanism of domestic Alloy 690 steam generator tube have been investigate. An IMR model for the nickel-based alloy was proposed. The environmental fatigue life correction factor (F en ) was established, which addressed the environmental factors, including temperature, strain rate and dissolved oxygen. The method to evaluate environmental fatigue damage of structural materials in NPPs was proposed. (authors)

Using Spectrophotometric Titrations To Characterize Humic Acid Reactivity at Environmental Concentrations

International Nuclear Information System (INIS)

Janot, N.; Benedetti, M. F.; Janot, N.; Reiller, P. E.; Korshin, G. V.

2010-01-01

Potentiometric titration is a common method to characterize dissolved organic matter (DOM) reactivity. Because of the sensitivity of pH electrodes, it is necessary to work with very high DOM (≥1 g/L) concentrations that are unrealistic compared to those found in natural waters (0. 1 to 100 mg/L). To obtain proton binding data for concentrations closer to environmental values, spectroscopic titration methodology is a viable alternative to traditional potentiometric titrations. Spectrophotometric titrations and UV visible spectra of a diluted solution of purified Aldrich humic acid (5 mg(DOC)/L) are used to estimate changes in proton binding moieties as function of pH and ionic strength after calculation of differential absorbance spectra variations. After electrostatic correction of spectrophotometric data, there is a linear operational correlation between spectrophotometric and potentiometric data which can be used as a transfer function between the two properties. Spectrophotometric titrations are then used to determine the changes of humic acid protonation after adsorption onto alpha-alumina. (authors)

Using Spectrophotometric Titrations To Characterize Humic Acid Reactivity at Environmental Concentrations

Energy Technology Data Exchange (ETDEWEB)

Janot, N.; Benedetti, M. F. [Univ Paris Diderot, Lab Geochim Eaux, UMR CNRS 7154, IPGP, F-75025 Paris 13 (France); Janot, N.; Reiller, P. E. [CE Saclay, CEA DEN DANS DPC SECR, Lab Speciat Radionucleides and Mol, F-91191 Gif Sur Yvette (France); Korshin, G. V. [Univ Washington, Dept Civil and Environm Engn, Seattle, WA 98195 (United States)

2010-07-01

Potentiometric titration is a common method to characterize dissolved organic matter (DOM) reactivity. Because of the sensitivity of pH electrodes, it is necessary to work with very high DOM ({>=}1 g/L) concentrations that are unrealistic compared to those found in natural waters (0. 1 to 100 mg/L). To obtain proton binding data for concentrations closer to environmental values, spectroscopic titration methodology is a viable alternative to traditional potentiometric titrations. Spectrophotometric titrations and UV visible spectra of a diluted solution of purified Aldrich humic acid (5 mg(DOC)/L) are used to estimate changes in proton binding moieties as function of pH and ionic strength after calculation of differential absorbance spectra variations. After electrostatic correction of spectrophotometric data, there is a linear operational correlation between spectrophotometric and potentiometric data which can be used as a transfer function between the two properties. Spectrophotometric titrations are then used to determine the changes of humic acid protonation after adsorption onto alpha-alumina. (authors)

Arsenic speciation in environmental samples by hydride generation and electrothermal atomic absorption spectrometry.

Science.gov (United States)

Anawar, Hossain Md

2012-01-15

For the past few years many studies have been performed to determine arsenic (As) speciation in drinking water, food chain and other environmental samples due to its well-recognized carcinogenic and toxic effects relating to its chemical forms and oxidation states. This review provides an overview of analytical methods, preconcentration and separation techniques, developed up to now, using HGAAS and ETAAS for the determination of inorganic As and organoarsenic species in environmental samples. Specific advantages, disadvantages, selectivity, sensitivity, efficiency, rapidity, detection limit (DL), and some aspects of recent improvements and modifications for different analytical and separation techniques, that can define their application for a particular sample analysis, are highlighted. HG-AAS has high sensitivity, selectivity and low DL using suitable separation techniques; and it is a more suitable, affordable and much less expensive technique than other detectors. The concentrations of HCl and NaBH(4) have a critical effect on the HG response of As species. Use of l-cysteine as pre-reductant is advantageous over KI to obtain the same signal response for different As species under the same, optimum and mild acid concentration, and to reduce the interference of transition metals on the arsine generation. Use of different pretreatment, digestion, separation techniques and surfactants can determine As species with DL from ngL(-1) to μgL(-1). Out of all the chromatographic techniques coupled with HGAAS/ETAAS, ion-pair reversed-phase chromatography (IP-RP) is the most popular due to its higher separation efficiency, resolution selectivity, simplicity, and ability to separate up to seven As species for both non-ionic and ionic compounds in a signal run using the same column and short time. However, a combination of anion- and cation-exchange chromatography seems the most promising for complete resolution up to eight As species. The ETAAS method using different

Probabilistic Prognosis of Environmental Radioactivity Concentrations due to Radioisotopes Discharged to Water Bodies from Nuclear Power Plants.

Science.gov (United States)

Tomás Zerquera, Juan; Mora, Juan C; Robles, Beatriz

2017-11-15

Due to their very low values, the complexity of comparing the contribution of nuclear power plants (NPPs) to environmental radioactivity with modeled values is recognized. In order to compare probabilistic prognosis of radioactivity concentrations with environmental measurement values, an exercise was performed using public data of radioactive routine discharges from three representative Spanish nuclear power plants. Specifically, data on liquid discharges from three Spanish NPPs: Almaraz, Vandellós II, and Ascó to three different aquatic bodies (river, lake, and coast) were used. Results modelled using generic conservative models together with Monte Carlo techniques used for uncertainties propagation were compared with values of radioactivity concentrations in the environment measured in the surroundings of these NPPs. Probability distribution functions were inferred for the source term, used as an input to the model to estimate the radioactivity concentrations in the environment due to discharges to the water bodies. Radioactivity concentrations measured in bottom sediments were used in the exercise due to their accumulation properties. Of all the radioisotopes measured in the environmental monitoring programs around the NPPs, only Cs-137, Sr-90, and Co-60 had positive values greater than their respective detection limits. Of those, Sr-90 and Cs-137 are easily measured in the environment, but significant contribution from the radioactive fall-out due to nuclear explosions in the atmosphere exists, and therefore their values cannot be attributed to the NPPs. On the contrary, Co-60 is especially useful as an indicator of the radioactive discharges from NPPs because its presence in the environment can solely be attributed to the impact of the closer nuclear facilities. All the modelled values for Co-60 showed a reasonable correspondence with measured environmental data in all cases, being conservative in two of them. The more conservative predictions obtained with

Environmental justice implications of industrial hazardous waste generation in India: a national scale analysis

Science.gov (United States)

Basu, Pratyusha; Chakraborty, Jayajit

2016-12-01

While rising air and water pollution have become issues of widespread public concern in India, the relationship between spatial distribution of environmental pollution and social disadvantage has received less attention. This lack of attention becomes particularly relevant in the context of industrial pollution, as India continues to pursue industrial development policies without sufficient regard to its adverse social impacts. This letter examines industrial pollution in India from an environmental justice (EJ) perspective by presenting a national scale study of social inequities in the distribution of industrial hazardous waste generation. Our analysis connects district-level data from the 2009 National Inventory of Hazardous Waste Generating Industries with variables representing urbanization, social disadvantage, and socioeconomic status from the 2011 Census of India. Our results indicate that more urbanized and densely populated districts with a higher proportion of socially and economically disadvantaged residents are significantly more likely to generate hazardous waste. The quantity of hazardous waste generated is significantly higher in more urbanized but sparsely populated districts with a higher proportion of economically disadvantaged households, after accounting for other relevant explanatory factors such as literacy and social disadvantage. These findings underscore the growing need to incorporate EJ considerations in future industrial development and waste management in India.

Simple and Environmentally Friendly Fabrication of Superhydrophobic Alkyl Ketene Dimer Coated MALDI Concentration Plates.

Science.gov (United States)

Romson, Joakim; Jacksén, Johan; Emmer, Åsa

2017-08-01

Here we present a method to manufacture peptide-concentrating MALDI-plates with alkyl ketene dimer (AKD) as a new superhydrophobic coating. The fabrication of the hydrophobic plates included application of AKD by airbrush, and negative contact printing to generate the concentration sites. Deposited sample droplets were contained within the prestructured sites, and self-adjusted onto the site if slightly misplaced. No AKD contamination was observed, and the plates could easily be cleaned and regenerated. The S/N values for four model peptides was about twice as high compared with a standard steel plate and a commercial concentration plate. Graphical Abstract ᅟ.

Simple and Environmentally Friendly Fabrication of Superhydrophobic Alkyl Ketene Dimer Coated MALDI Concentration Plates

Science.gov (United States)

Romson, Joakim; Jacksén, Johan; Emmer, Åsa

2017-08-01

Here we present a method to manufacture peptide-concentrating MALDI-plates with alkyl ketene dimer (AKD) as a new superhydrophobic coating. The fabrication of the hydrophobic plates included application of AKD by airbrush, and negative contact printing to generate the concentration sites. Deposited sample droplets were contained within the prestructured sites, and self-adjusted onto the site if slightly misplaced. No AKD contamination was observed, and the plates could easily be cleaned and regenerated. The S/N values for four model peptides was about twice as high compared with a standard steel plate and a commercial concentration plate.

Analyze the economic and environmental viability in distributed generation of electric power from renewable sources

International Nuclear Information System (INIS)

Jantim Neto, Humberto

2010-01-01

This paper brings a brief of economical and social environmental analysis about distributed electric's energy generation, based on a comparison to centralized generation. The motivation of the proposed analysis has its origin on a reflection about politics and scheming directed to Brazilian's energy sector. This study has renewable energy resources as setting, represented for Belo Monte generation's plant and undertaking registered on the Reservation's Energy Auction 2010. The study took into account economics and technical aspects, whereas the viability analysis was formed from benefits got from different forms of electric's generation. The conclusions of this shows that distributed electric's energy generation may have economics and socio environment benefits over centralized generation. (author)

POWER-GEN '90 conference papers: Volume 3 (Environmental trends and issues) and Volume 4 (Case histories - Non-utility power generation)

International Nuclear Information System (INIS)

Anon.

1990-01-01

This is book 2 of a collection of papers presented at the Third International Power Generation Industries Conference on December 4-6, 1990. The book contains Volume 3, Environmental Trends and Issues, and Volume 4, Case Histories - Non-utility Power Generation. The topics of the papers include environmental legislative and regulatory trends, acid rain compliance strategies and technologies, other global environmental concerns, gas fired systems, solid and waste fuels, despatching and wheeling, and strategies for purchasing non-utility power

Quasibound states in graphene quantum-dot nanostructures generated by concentric potential barrier rings

International Nuclear Information System (INIS)

Jiang Zhao-Tan; Yu Cheng-Long; Dong Quan-Li

2012-01-01

We study the quasibound states in a graphene quantum-dot structure generated by the single-, double-, and triple-barrier electrostatic potentials. It is shown that the strongest quasibound states are mainly determined by the innermost barrier. Specifically, the positions of the quasibound states are determined by the barrier height, the number of the quasibound states is determined by the quantum-dot radius and the angular momentum, and the localization degree of the quasibound states is influenced by the width of the innermost barrier, as well as the outside barriers. Furthermore, according to the study on the double- and triple-barrier quantum dots, we find that an effective way to generate more quasibound states with even larger energy level spacings is to design a quantum dot defined by many concentric barriers with larger barrier-height differences. Last, we extend our results into the quantum dot of many barriers, which gives a complete picture about the formation of the quasibound states in the kind of graphene quantum dot created by many concentric potential barrier rings. (rapid communication)

Oscillations and concentrations generated by A-free mappings and weak lower semicontinuity of integral functionals

Czech Academy of Sciences Publication Activity Database

Fonseca, I.; Kružík, Martin

Roč.16, č. 2 (2010), s. 472-502 ISSN 1262-3377 R&D Projects: GA AV ČR IAA1075402 Institutional research plan: CEZ:AV0Z10750506 Keywords : oscillations * concentrations Subject RIV: BA - General Mathematics Impact factor: 1.084, year: 2009 http://library.utia.cas.cz/separaty/2009/MTR/kruzik-oscillations and concentrations generated by a-free mappings and weak lower semicontinuity of integral functionals.pdf

Draft environmental statement related to the operation of Hope Creek Generating Station (Docket No. 50-354)

International Nuclear Information System (INIS)

Wagner, D.H.

1984-06-01

This report contains an assessment of the environmental impact associated with the operation of the Hope Creek Generating Station pursuant to the National Environment Policy Act of 1969 (NEPA) and Title 10 of the Code of Federal Regulations, Part 51, as amended, of the Nuclear Regulatory Commission regulations. This statement examines the environmental impacts, environmental consequences and mitigating actions, and environmental and economic benefits and costs associated with station operation. Land use and terrestrial and aquatic ecological impacts will be small. No operational impacts to historic and archeological sites are anticipated. The effects of routine operations, energy transmission, and periodic maintenance of rights-of-way and transmission facilities should not jeopardize any populations of endangered or threatened species. No significant impacts are anticipated from normal operational releases of radioactivity. The risk of radiation exposure associated with accidental release of radioactivity is very low. Socioeconomic impacts of the project are anticipated to be minimal. The action called for is the issuance of an operating license for Hope Creek Generating Station, Unit 1

A review of environmental governance and its effects on concentrate discharge from desalination plants in the Kingdom of Saudi Arabia

KAUST Repository

Van Der Merwe, Riaan; Lattemann, Sabine; Amy, Gary L.

2013-01-01

The most likely environmental impact of concentrate discharges (in most instances twice the concentration of the ambient environment) leaking from desalination plants on local marine ecosystems has been controversially discussed for many years

Radon as an environmental risk: concentration measurements in family buildings at Cordoba city

International Nuclear Information System (INIS)

Bonzi, A.; Murua, C.; Martin, H.R.

1992-01-01

Measurements of radon concentration at homes are usual activities in the last years at the countries with uranium in their soils. On the other hand, the man's radiological protection about radiation is related to the environmental actions for a healthy life, but not much known for a public. The great quantities of ore with uranium can be an important source of irradiation when they are used as building materials. The soils are important too for the emanations of radon in the interior of buildings and for these reasons, the radon concentration measurements in Cordoba familiar houses were implemented in the summer of 1991. The Alpha Track Technique and the results obtained indicate the need of other measurements and a winter measurement for investigation variations of radon concentration. The typical values measured were low, about 4.13 Bq/m 3 if they are compared with other Argentine values measured. This paper discusses the procedure, techniques and criteria used in the work held in Cordoba city, Argentina. (Author)

Transport of Fluorescently Labeled Hydroxyapatite Nanoparticles in Saturated Granular Media at Environmentally Relevant Concentrations of Surfactants

Science.gov (United States)

Little is known about the mobility of engineered nanoparticles (ENPs) in granular media at environmentally relevant concentration of surfactant, which represents a critical knowledge gap in employing ENPs for in-situ remediation of contaminated groundwater. In this study, transpo...

A study of diurnal variations of radon and thoron concentrations in different indoor environmental conditions

International Nuclear Information System (INIS)

Pant, Preeti; Prasad, Mukesh; Ramola, R.C.

2015-01-01

The measurements for diurnal variations in radon ( 222 Rn) and thoron ( 220 Rn) concentrations were performed in the different indoor conditions of Tehri Garhwal, Uttarakhand, India by using AlphaGUARD, Portable Radon Monitor and RAD7. While selecting the dwellings, the ventilation conditions, building materials, life style of the inhabitants and their exposure time indoors were also considered. The behavior of indoor radon and thoron concentrations was observed for different type of dwellings with different environmental conditions. The measurement techniques, results obtained and comparison of the results are discussed in details. (author)

Mercury concentrations in snapping turtles (Chelydra serpentina) correlate with environmental and landscape characteristics.

Science.gov (United States)

Turnquist, Madeline A; Driscoll, Charles T; Schulz, Kimberly L; Schlaepfer, Martin A

2011-10-01

Mercury (Hg) deposited onto the landscape can be transformed into methylmercury (MeHg), a neurotoxin that bioaccumulates up the aquatic food chain. Here, we report on Hg concentrations in snapping turtles (Chelydra serpentina) across New York State, USA. The objectives of this study were to: (1) test which landscape, water, and biometric characteristics correlate with total Hg (THg) concentrations in snapping turtles; and (2) determine whether soft tissue THg concentrations correlate with scute (shell) concentrations. Forty-eight turtles were sampled non-lethally from ten lakes and wetlands across New York to observe patterns under a range of ecosystem variables and water chemistry conditions. THg concentrations ranged from 0.041 to 1.50 μg/g and 0.47 to 7.43 μg/g wet weight of muscle tissue and shell, respectively. The vast majority of mercury (~94%) was in the MeHg form. Sixty-one percent of turtle muscle samples exceeded U.S. Environmental Protection Agency (U.S. EPA) consumption advisory limit of 0.3 μg Hg/g for fish. Muscle THg concentrations were significantly correlated with sulfate in water and the maximum elevation of the watershed. Shell THg concentrations were significantly correlated with the acid neutralizing capacity (ANC) of water, the maximum elevation of the watershed, the percent open water in the watershed, the lake to watershed size, and various forms of atmospheric Hg deposition. Thus, our results demonstrate that THg concentrations in snapping turtles are spatially variable, frequently exceed advisory limits, and are significantly correlated with several landscape and water characteristics.

Establishing a routine procedure for determination of environmental tritium concentration at ICIT

International Nuclear Information System (INIS)

Varlam, C.; Stefanescu, I.; Faurescu, I.; Vagner, I.; Faurescu, D.; Bogdan, D.

2009-01-01

Full text: The Cryogenic Pilot is an experimental project within the national nuclear energy research program, which has the aim of developing technologies for tritium and deuterium separation by cryogenic distillation. The process used in this installation is based on a combined method for liquid-phase catalytic exchange (LPCE) and cryogenic distillation. There are two ways in which the Cryogenic Pilot can interact with the environment: by atmospheric release and through the sewage system. In order to establish the base level of tritium concentration in the environment around the nuclear facilities, we investigated the sample preparation treatment for different types of samples: spinach, spring wheat, onion, hay, grass, apple, garden lettuce, soil, milk, and meat. For the azeotropic distillation of all types of samples were used two solvents, toluene and cyclohexane, and all measurements for the determination of environmental tritium concentration were carried out using liquid scintillation counting (LSC), with ultra-low liquid scintillation spectrometer Quantulus 1220 specially designed for environmental samples and low radioactivity. Sample scintillation cocktail ratio was 8:12 ml and liquid scintillation cocktail was UltimaGold LLT. The background determined for the prepared blank samples was between 0.926 CPM and 1.002 CPM and the counting efficiency between 25.37% and 26.10%. The counting time was 1000 minutes (50 minutes/20 cycles) for each sample, and the minimum detectable activity according to ISO 9698 was 8.9 TU and 9.05 TU, respectively, at a confidence factor of 3. (authors)

Steam generators of Phenix: Measurement of the hydrogen concentration in sodium for detecting water leaks in the steam generator tubes

International Nuclear Information System (INIS)

Cambillard, E.; Lacroix, A.; Langlois, J.; Viala, J.

1975-01-01

The Phenix secondary circuits are provided with measurement systems of hydrogen concentration in sodium, that allow for the detection of possible water leaks in steam generators and the location of a faulty module. A measurement device consists of : a detector with nickel membranes of 0, 3 mm wall thickness, an ion pump with a 200 l/s flow rate, a quadrupole mass spectrometer and a calibrated hydrogen leak. The temperature correction is made automatically. The main tests carried out on the leak detection systems are reported. Since the first system operation (October 24, 1973), the measurements allowed us to obtain the hydrogen diffusion rates through the steam generator tube walls. (author)

Tube collector with integrated tracking parabolic concentrator

Energy Technology Data Exchange (ETDEWEB)

Grass, C.; Benz, N.; Hacker, Z.; Timinger, A. [ZAE Bayern, Bavarian Centre for Applied Energy Research, Muenchen (Germany)

2000-07-01

Low concentrating CPC collectors usually do not track the sun and are mounted in east-west direction with a latitude dependent slope angle. They are most suitable for maximum working temperatures up to 200 250 deg. C. We present a novel evacuated tube-collector with a trough-like concentrating mirror. Single-axis tracking of the mirror is realized with a magnetic mechanism. The mirror is mounted inside the evacuated tube and hence protected from environmental influences. One axis tracking in combination with a small acceptance angle allows for higher concentration as compared to non-tracking concentrating collectors. Ray-tracing analysis shows a half acceptance angle of about 5 deg. at a geometrical concentration ratio of 3.2. The losses of evacuated tube collectors are dominated by the radiation losses of the absorber. Hence, reducing the absorber size can lead to higher efficiencies at high operating temperature levels. With the presented collector we aim for operating temperatures up to 400 deg. C. At temperatures of 300 deg. C we expect efficiencies of 65 %. This allows for application in industrial process heat generation, high efficient solar cooling and power generation. A first prototype was tested at the ZAE Bayern. The optical efficiency was measured to be 75 %. (au)

Environmental factors affecting the concentration of phenolic compounds in Myrcia tomentosa leaves

Directory of Open Access Journals (Sweden)

Leonardo L. Borges

2013-02-01

Full Text Available Myrcia tomentosa (Aubl. DC., Myrtaceae, found in Central Brazilian Cerrado and popularly known as "goiaba-brava", belongs to the Myrcia genus, which has several species with medicinal properties such as: hypoglycemic, diuretic, hypotensive, antidiarrheal, antimicrobial and antitumor. The present study aimed to analyzed the environmental influence on concentrations of phenolic metabolites in M. tomentosa leaves. Compounds assayed in the leaves were: total phenols, tannins by protein precipitation, hydrolysable tannins and total flavonoids and mineral nutrients, while soil fertility was also analyzed, all over during one year. The results were submitted to Pearson Correlation Analysis and stepwise Multiple Regression Analysis to investigate the relationship between phenolics and environment data. Analysis of variance and Cluster Analysis allowed indicated a high variability in samples from different sites. The results obtained suggests that content of phenolics from M. tomentosa leaves are influenced by environmental factors, particularly some foliar nutrients (N1, Ca1 and Mn1, soil nutrients (Ca s and Ks and Rainfall.

Environmental factors affecting the concentration of phenolic compounds in Myrcia tomentosa leaves

Directory of Open Access Journals (Sweden)

Leonardo L. Borges

2013-04-01

Full Text Available Myrcia tomentosa (Aubl. DC., Myrtaceae, found in Central Brazilian Cerrado and popularly known as "goiaba-brava", belongs to the Myrcia genus, which has several species with medicinal properties such as: hypoglycemic, diuretic, hypotensive, antidiarrheal, antimicrobial and antitumor. The present study aimed to analyzed the environmental influence on concentrations of phenolic metabolites in M. tomentosa leaves. Compounds assayed in the leaves were: total phenols, tannins by protein precipitation, hydrolysable tannins and total flavonoids and mineral nutrients, while soil fertility was also analyzed, all over during one year. The results were submitted to Pearson Correlation Analysis and stepwise Multiple Regression Analysis to investigate the relationship between phenolics and environment data. Analysis of variance and Cluster Analysis allowed indicated a high variability in samples from different sites. The results obtained suggests that content of phenolics from M. tomentosa leaves are influenced by environmental factors, particularly some foliar nutrients (N1, Ca1 and Mn1, soil nutrients (Ca s and Ks and Rainfall.

Environmental risks and future generations: Criteria for public policy

Energy Technology Data Exchange (ETDEWEB)

Howarth, R.B.

1992-10-01

This paper examines alternative normative approaches to the policy challenges posed by long-term environmental problems such as toxic and radioactive waste disposal, stratospheric ozone depletion, and climate change. The paper argues that cost-benefit analysis is limited in its ability to handle the issues of intergenerational equity and uncertainty that are intrinsic to such problems. Also considered is the precautionary principle, which holds that policies should seek to reduce threats to the welfare of future generations if the costs of doing so would not significantly reduce the subjective well-being of existing persons. Although the precautionary principle depends on an explicit value judgement, it yields a policy criterion that is operationally decisive under a wide array of circumstances.

Compilation of monitoring data on environmental concentration and pharmaceuticals; Zusammenstellung von Monitoringdaten zu Umweltkonzentrationen und Arzneimitteln

Energy Technology Data Exchange (ETDEWEB)

Bergmann, Axel; Fohrmann, Reinhard [IWW Rheinisch-Westfaelisches Institut fuer Wasser Beratungs- und Entwicklungsgesellschaft mbH, Muelheim an der Ruhr (Germany); Weber, Frank-Andreas [IWW Rheinisch-Westfaelisches Institut fuer Wasser Beratungs- und Entwicklungsgesellschaft mbH, Biebesheim am Rhein (Germany)

2011-10-15

In a comprehensive literature review we compiled an inventory of German and European monitoring data on the occurrence and behavior of pharmaceuticals in the environment. Environmental concentrations measured in various field campaigns and results of ecotoxicological and physico-chemical investigations were integrated in three databases. The analysis of these databases was used to identify priority pharmaceuticals and to suggest strategies for further monitoring. The database MEC reports 274 pharmaceuticals (both human and veterinary pharmaceuticals, of which 27 are metabolites), for which measured concentrations were available for one of the matrices sewage effluent, surface water, groundwater, drinking water, sewage sludge, manure, soil or sediment (10,150 database entries). The database OeKOTOX compiles 251 pharmaceuticals, for which ecotoxicological effect concentrations for at least one test organism are available in the literature and the database ''Umweltverhalten'' includes physico-chemical parameters of 183 compounds. The compiled citations of the relevant literature (1,382 citations) were provided for further use in the bibliographic software Reference Manager. The analysis of the databases shows that for only a subset of 70 pharmaceuticals measured concentrations can be evaluated based on ecotoxicological effect concentrations. The estimation of PNEC-values (Predicted No Effect Concentration) allowed for the identification of 19 pharmaceuticals with sufficient and 9 pharmaceuticals with poor ecotoxicological data which presumably endanger ecosystems in at least one river section in Germany. Special attention should be paid to ''novel'' pharmaceuticals, for which missing environmental and/or ecotoxicological data prevent a reliable risk assessment, but dramatically increasing consumption rates point to a high risk potential. The prioritization of pharmaceuticals presented by the authors considers the ecotoxicological effect concentrations, the occurrence

IMPACT OF AN OZONE GENERATOR AIR CLEANER ON STYRENE CONCENTRATIONS IN AN INDOOR AIR QUALITY RESEARCH CHAMBER

Science.gov (United States)

The paper gives results of an investigation of the impact of an ozone generator air cleaner on vapor-phase styrene concentrations in a full-scale indoor air quality test chamber. The time history of the concentrations of styrene and ozone is well predicted by a simulation model u...

The assessment of the impurities concentration into CANDU steam generator crevices

International Nuclear Information System (INIS)

Lucan, D.; Fulger, M.; Florea, S.; Jinescu, Ghe.; Woinaroschy, Al.

2001-01-01

Crevice corrosion involves a number of simultaneous and interacting operations, including mass transfer processes, production of metal ions within the crevice and hydrolysis reactions, resulting in a very aggressive solution from the point of view of corrosion. These intermediary corrosion processes are in a complex interdependence and they imply a number of important parameters, including both the crevice gap and depth. The major goal of this paper was development of a mathematical model for the calculation of the concentrations of impurities (Na + , Cl - , Fe 2+ ) into crevices and experimental research related to this process. There were identified the important experimental parameters that require further experimental research. This model considers all the processes that interfere in the impurities concentration mechanism achieved into the crevice but it also makes some assumptions for the easy solving of mathematical equations. Because the measurement of the impurities concentration into the steam generator and/or deposition in the crevices solutions is not achievable, one cannot estimate the corrosion intensity inside these locations. The mathematical model presented in this paper may predict the impurities concentration in the crevices. Based on the results obtained in the study of corrosion one can appreciate the corrosion intensity in the materials with crevices or conceive an experimental program, which could lead to results. The predictive quality of the model may contribute to the choice of new design solutions, development of new alloys and criteria of material selection. (authors)

Survey and analysis of environmental performance indicators applied to thermoelectric generation styles; Levantamento e analise de indicadores de desempenho ambiental aplicados a empreendimentos termeletricos

Energy Technology Data Exchange (ETDEWEB)

Freitas, Bruno Moreno Rodrigo de; Cardoso Junior, Ricardo Abranches Felix [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil)

2010-07-01

Country economic growth is proportional bond to it electric generation increasing capacity. Brazil, which has a power matrix predominantly renewable, currently is increasing generation, from thermoelectricity, due, mainly, to major facilities in relation to environmental licensing. Since this new Thermal Power Plants operating, tied to the generation with those ones already installed, will result in environmental impacts that must be properly controlled. Such control should follow the Environmental Performance Evaluation guidance, standardized by ABNT NBR ISO 14031/04. Therefore, the following work presents the main Environmental Performance Indicators applied to several thermoelectric generation styles (Oil, Natural Gas, Diesel, Mineral Coal, Biomass, Waste, Solar and Nuclear). (author)

Twenty-five years of environmental radionuclide concentrations near a nuclear power plant.

Science.gov (United States)

Harris, Charles; Kreeger, Danielle; Patrick, Ruth; Palms, John

2015-05-01

The areas in and along a 262-km length of the Susquehanna River in Pennsylvania were monitored for the presence of radioactive materials. This study began two months after the 1979 Three Mile Island (TMI) partial reactor meltdown; it spanned the next 25 y. Monitoring points included stations at the PPL Susquehanna and TMI nuclear power plants. Monthly gamma measurements document concentrations of radionuclides from natural and anthropogenic sources. During this study, various series of gamma-emitting radionuclide concentration measurements were made in many general categories of animals, plants, and other inorganic matter. Sampling began in 1979 before the first start-up of the PPL Susquehanna power plant. Although all species were not continuously monitored for the entire period, an extensive database was compiled. In 1986, the ongoing measurements detected fallout from the Chernobyl nuclear accident. These data may be used in support of dose or environmental transport calculations.

Probabilistic modelling of prospective environmental concentrations of gold nanoparticles from medical applications as a basis for risk assessment.

Science.gov (United States)

Mahapatra, Indrani; Sun, Tian Yin; Clark, Julian R A; Dobson, Peter J; Hungerbuehler, Konrad; Owen, Richard; Nowack, Bernd; Lead, Jamie

2015-12-22

The use of gold nanoparticles (Au-NP) based medical applications is rising due to their unique physical and chemical properties. Diagnostic devices based on Au-NP are already available in the market or are in clinical trials and Au-NP based therapeutics and theranostics (combined diagnostic and treatment modality) are in the research and development phase. Currently, no information on Au-NP consumption, material flows to and concentrations in the environment are available. Therefore, we estimated prospective maximal consumption of Au-NP from medical applications in the UK and US. We then modelled the Au-NP flows post-use and predicted their environmental concentrations. Furthermore, we assessed the environment risks of Au-NP by comparing the predicted environmental concentrations (PECs) with ecological threshold (PNEC) values. The mean annual estimated consumption of Au-NP from medical applications is 540 kg for the UK and 2700 kg for the US. Among the modelled concentrations of Au-NP in environmental compartments, the mean annual PEC of Au-NP in sludge for both the UK and US was estimated at 124 and 145 μg kg(-1), respectively. The mean PEC in surface water was estimated at 468 and 4.7 pg L(-1), respectively for the UK and US. The NOEC value for the water compartment ranged from 0.12 up to 26,800 μg L(-1), with most values in the range of 1000 μg L(-1). The results using the current set of data indicate that the environmental risk from Au-NP used in nanomedicine in surface waters and from agricultural use of biosolids is minimal in the near future, especially because we have used a worst-case use assessment. More Au-NP toxicity studies are needed for the soil compartment.

Environmental Performance of Hypothetical Canadian Pre-Combustion Carbon Dioxide Capture Processes Using Life-Cycle Techniques

Directory of Open Access Journals (Sweden)

Lakkana Piewkhaow

2016-03-01

Full Text Available The methodology of life-cycle assessment was applied in order to evaluate the environmental performance of a hypothetical Saskatchewan lignite-fueled Integrated Gasification Combined Cycle (IGCC electricity generation, with and without pre-combustion carbon dioxide (CO2 capture from a full life-cycle perspective. The emphasis here is placed on environmental performance associated with air contaminants of the comparison between IGCC systems (with and without CO2 capture and a competing lignite pulverized coal-fired electricity generating station in order to reveal which technology offers the most positive environmental effects. Moreover, ambient air pollutant modeling was also conducted by using American Meteorological Society/Environmental Protection Agency Regulatory Model (AERMOD air dispersion modeling to determine the ground-level concentration of pollutants emitted from four different electricity generating stations. This study assumes that all stations are located close to Estevan. The results showed a significant reduction in greenhouse gas (GHG emissions and acidification potential by applying both post-combustion and pre-combustion CO2 capture processes. The GHG emissions were found to have reduced by 27%–86%, and IGCC systems were found to compare favorably to pulverized coal systems. However, in other environmental impact categories, there are multiple environmental trade-offs depending on the capture technology used. In the case of post-combustion capture, it was observed that the environmental impact category of eutrophication potential, summer smog, and ozone depletion increased due to the application of the CO2 capture process and the surface mining coal operation. IGCC systems, on the other hand, showed the same tendency as the conventional coal-fired electricity generation systems, but to a lesser degree. This is because the IGCC system is a cleaner technology that produces lower pollutant emission levels than the electricity

Environmentally relevant concentrations of polyethylene microplastics negatively impact the survival, growth and emergence of sediment-dwelling invertebrates.

Science.gov (United States)

Ziajahromi, Shima; Kumar, Anupama; Neale, Peta A; Leusch, Frederic D L

2018-05-01

Microplastics are a widespread environmental pollutant in aquatic ecosystems and have the potential to eventually sink to the sediment, where they may pose a risk to sediment-dwelling organisms. While the impacts of exposure to microplastics have been widely reported for marine biota, the effects of microplastics on freshwater organisms at environmentally realistic concentrations are largely unknown, especially for benthic organisms. Here we examined the effects of a realistic concentration of polyethylene microplastics in sediment on the growth and emergence of a freshwater organism Chironomus tepperi. We also assessed the influence of microplastic size by exposing C. tepperi larvae to four different size ranges of polyethylene microplastics (1-4, 10-27, 43-54 and 100-126 μm). Exposure to an environmentally relevant concentration of microplastics, 500 particles/kg sediment , negatively affected the survival, growth (i.e. body length and head capsule) and emergence of C. tepperi. The observed effects were strongly dependent on microplastic size with exposure to particles in the size range of 10-27 μm inducing more pronounced effects. While growth and survival of C. tepperi were not affected by the larger microplastics (100-126 μm), a significant reduction in the number of emerged adults was observed after exposure to the largest microplastics, with the delayed emergence attributed to exposure to a stressor. While scanning electron microscopy showed a significant reduction in the size of the head capsule and antenna of C. tepperi exposed to microplastics in the 10-27 μm size range, no deformities to the external structure of the antenna and mouth parts in organisms exposed to the same size range of microplastics were observed. These results indicate that environmentally relevant concentrations of microplastics in sediment induce harmful effects on the development and emergence of C. tepperi, with effects greatly dependent on particle size. Copyright

Life cycle assessment(Lca) of the power generation system for the establishment of environmental management system in Korea

International Nuclear Information System (INIS)

Lee, Y.E.

2005-01-01

The development of electricity technology from the environmental aspect has become the key factor for competitiveness, i.e., environmental friendliness is one of the most important considerations for technology development. Under the monopolised electric industry of the past, there was little motivation for individual companies to actually manage their company. However, because of the increasing demand for energy and the concerns for the environment, energy policies are shifting towards a sustainable development, which considers both the economics and environmental protection. According to the paradigm shift of the energy policy, it is necessary to compare two major electricity sources from the view of environmental management issues. It is effective with the common dimensionless unit concerning the various environmental categories including the radiological and non-radiological points of view, which can be realized by the new environmental impact assessment methodology such as the life cycle assessment (LCA). This study aims at a comparison of the environmental impacts of the nuclear and coal power generation systems using the LCA methodology. These results are very preliminary ones, however, this study will be helpful in making a decision on a long term electricity plan and the energy mix optimization when considering the environmental aspect in Korea and also the power generation companies could enhance their images by showing off their willingness to improve the environmental quality. (orig.)

Effects of molting and environmental factors on trace metal body-burdens and hemocyanin concentrations in the American lobster, Homarus americanus.

NARCIS (Netherlands)

Engel, D.W.; Brouwer, M.H.J.; Mercaldo-Allen, R.

2001-01-01

Hemocyanin concentrations in the hemolymph of marine crustacea are dependent on the molt cycle and on environmental conditions. Studies in our laboratories have found that hemocyanin levels in blue crabs are reduced after ecdysis and under conditions of environmental stress (Engel, Brouwer, &

Environmental services generated by organic agriculture: A view from the air

Science.gov (United States)

Bigeriego, Elena; Cabezas, José; Labrador, Juana; María Moreno, Marta

2017-04-01

This work aims to develop an alternative methodology that enables monitoring the environmental differential that agroecological management involves in order to consolidate feasible payments for environmental services generated by organic agriculture. For this purpose, LANDSAT images have been used, and the Normalized Difference Vegetation Index (NDVI) of organic fruit farms, all of them with the same species and the similar edaphic and climatic characteristics, has been compared with the NDVI obtained at other nearby fruit farms under conventional management, all of them in Extremadura (Spain). As a result, we obtained a series of statistical data that allows us to clearly differentiate between these two types of management. Among these data, remarkable differences have been detected regarding the minimum values of NDVI in the non-productive periods of the fruit, which is higher in the organic farms due to the permanent vegetation soil cover, with the subsequent effects on soil protection and carbon sequestration. The conclusions of the paper show that it is possible to distinguish different models of crop management by using satellite images obtained in a quick and inexpensive way. Keywords: LANDSAT images; NDVI; environmental services; agroecology; organic agriculture.

Environmental isotope data no. 10: World survey of isotope concentration in precipitation (1988-1991). Report from a network

International Nuclear Information System (INIS)

1994-01-01

This is the tenth volume of the publication Environmental Isotope Data: World Survey of Isotope Concentration in Precipitation. This volume is primarily concerned with the concentration of the environmental isotopes (tritium, deuterium and oxygen-18) in monthly samples of precipitation taken by a global network of 169 stations in the period 1988 to 1991. Selected meteorological data, such as the amount of precipitation, mean water vapour pressure and surface air temperature, are also presented. Data before 1988 which were unavailable at the time of the earlier issues have also been included in the latter part of this volume as late reports. The data are being widely used in hydrological, hydrometeorological and climatological studies. 9 refs, 2 figs

Levels of tritium concentration in the environmental samples around JAERI TOKAI

International Nuclear Information System (INIS)

Matsuura, K.; Sasa, Y.; Nakamura, C.; Katagiri, H.

1995-01-01

By the operation of research reactors, tritium-handling facilities, nuclear power plants, and a reprocessing facility around JAERI TOKAI, tritium is released into the environment in compliance with the regulatory standards. To investigate the levels of tritium concentration in environmental samples around JAERI, rain, air (vapor and hydrogen gas), and tissue-free water of pine needles were measured and analyzed from 1984 to 1993. Sampling locations were determined by taking into consideration wind direction, distance from nuclear facilities, and population distribution. The NAKA site (about 6 km west-northwest from the Tokai site) was also selected as a reference point. Rain and tissue-free water of pine needles were sampled monthly. For air samples, sampling was carried out for two weeks by using the continuous tritium sampler. After the pretreatment of samples, tritium concentrations were measured by a low background liquid scintillation counter (detection limit 0.8 Bq/l). Annual mean tritium concentrations in rain observed at six points for 10 years was 0.8 to 8.9 Bq/l, which decreased with distance from the nuclear facilities. Tritium concentrations in rain obtained at Chiba City were around 0.8 Bq/l (1987-1988) and those at the NAKA site were 0.8 to 3.8 Bq/l. Annual mean HTO concentrations in air at three points for 10 years were 9.2 x 10 -2 to 1.1 Bq/m 3 , although HT concentrations in air, ranging from 1.7 x 10 -2 to 5.8 x 10 -2 Bq/m 3 , were not influenced by the operation of the nuclear facilities. Annual mean tritium concentrations in tissue-free water of pine needles at four points for 10 years were 1.4 to 31 Bq/l. Those at the NAKA site ranging from 1.4 to 6.2 Bq/l were in good agreement with the reported value by Takashima of 0.78 to 3.0 Bq/l at twenty-one locations in Japan. Monthly mean HTO concentrations in air for 10 years showed a good correlation with absolute humidity, while other samples showed no seasonal variation. Higher level tritium

Emission of flue gases from industrial boilers and generators and their control

International Nuclear Information System (INIS)

Shaikh, G.H.; Shareef, A.; Hashmi, D.R.

2005-01-01

Analysis of flue gases in the Stacks was carried out for 17 gas-fired boilers and 19 gas/diesel-fired generators and the concentrations of CO, NO/sub 2/, NO/sub x/ NO/sub 2/ SO/sub 2/ and C/sub x/ H/sub y/ were studied in the stack- emissions. The results have then been discussed with reference to the permissible limits, as per National Environmental Quality Standard. Higher concentration of co was observed in some boilers, and of CO and NO/sub x/ in some generators. Some effects of major air-pollutants have also been discussed as regards the human health, vegetables and materials. Some remedial measures have also been discussed to limit the concentration of air pollutants emitted from boilers and generators. (author)

Studies of techniques for the post-elution concentration of 99mTc obtained from gel type 99Mo/99mTc generators

International Nuclear Information System (INIS)

Suzuki, Katia Noriko

2009-01-01

On average 80% of the radiopharmaceuticals used in Nuclear Medicine are labeled with 99 mTc due to its physical properties and easy attainment through of 99 Mo/ 99 mTc generators. The Directory of Radiopharmacy (DIRF) of IPEN-CNEN/SP developed a gel type chromatographic generator of MoZr with 99 Mo produced by 98 Mo(n,γ) 99 Mo reaction that occurs at the IEA-R1 Nuclear Reactor. The gel is composed of zirconium molybdate with elution volume of 12 mL with an activity of 11100 MBq (300 mCi) producing a radioactive concentration of 925 MBq (25 mCi)/mL. The fission generator gives a higher radioactive concentration around 1850 MBq (50 mCi)/mL. The aim of this work is to study a system of post-elution concentration of 99 mTc for the attainment of a high enough radioactive concentration to meet the demands of the market, with a proved quality. Two types of systems of post-elution concentration were developed: the single and the tandem. The most appropriate system for the gel generator of 99 Mo/ 99 mTc, being at the same time sterile and vacuum automated, was the tandem system using Dionex 2.5 cc/QMA cartridges. The gel generator is eluted with 10 mL of solution of 0.1% NaCl and the pertechnetate anion is retained in the QMA cartridge and further eluted with 4 mL of saline. The process takes no more than 30 minutes. The elution efficiency of the system of concentration was 90 %. At the beginning of 2009 a global crisis in the supply of 99 Mo took place making it necessary the development of alternative technologies for the production of 99 Mo/ 99 mTc generators using fission produced 99 Mo and the development of an appropriate method to extend the useful life of this generator. The results of this study showed that the same system developed for the post- concentration of the gel generator can be employed for the fission generator, using the tandem system, giving a concentration factor of 3 for the elution of 99 mTc. (author)

The role of sludge and fouling on local concentration processes in PWR steam generators

International Nuclear Information System (INIS)

Millett, D.J.; Paine, J.P.N.; Fenton, J.M.

1992-01-01

A detailed model of the transport processes in heated crevices is used to understand the role of corrosion product deposits on local concentration processes in PWR steam generators (SG). The model describes the heat, mass and momentum transfer processes which occur in the porous deposits found in tube support and tube sheet crevices and in the sludge pile on top of the tube sheet. The model is used to predict the concentration of a given specie in the liquid pore solution at steady-state, as a function of time, and may be readily expanded to multi-component solutions by the use of chemical thermodynamic models. In a previous paper the authors investigated the role of SG design and SG operating parameters on the concentration process. In this paper, several parametric studies were performed to investigate the sensitivity of the local concentration process to the corrosion product properties

Defences against ammonia toxicity in tropical air-breathing fishes exposed to high concentrations of environmental ammonia: a review.

Science.gov (United States)

Ip, Y K; Chew, S F; Wilson, J M; Randall, D J

2004-10-01

In the tropics, air-breathing fishes can be exposed to environmental ammonia when stranded in puddles of water during the dry season, during a stay inside a burrow, or after agricultural fertilization. At low concentrations of environmental ammonia, NH(3) excretion is impeded, as in aerial exposure, leading to the accumulation of endogenous ammonia. At high concentrations of environmental ammonia, which results in a reversed NH(3) partial pressure gradient (DeltaP(NH3)), there is retention of endogenous ammonia and uptake of exogenous ammonia. In this review, several tropical air-breathing fishes (giant mudskipper, African catfish, oriental weatherloach, swamp eel, four-eyed sleeper, abehaze and slender African lungfish), which can tolerate high environmental ammonia exposure, are used as examples to demonstrate how eight different adaptations can be involved in defence against ammonia toxicity. Four of these adaptations deal with ammonia toxicity at branchial and/or epithelial surfaces: (1) active excretion of NH(4)(+); (2) lowering of environmental pH; (3) low NH(3) permeability of epithelial surfaces; and (4) volatilization of NH(3), while another four adaptations ameliorate ammonia toxicity at the cellular and subcellular levels: (5) high tolerance of ammonia at the cellular and subcellular levels; (6) reduction in ammonia production; (7) glutamine synthesis; and (8) urea synthesis. The responses of tropical air-breathing fishes to high environmental ammonia are determined apparently by behavioural adaptations and the nature of their natural environments.

Paducah Gaseous Diffusion Plant environmental report for 1992

Energy Technology Data Exchange (ETDEWEB)

Horak, C.M. [ed.] [Martin Marietta Energy Systems, Inc., Oak Ridge, TN (United States)

1993-09-01

This two-part report, Paducah Gaseous Diffusion Plant Environmental Report for 1992, is published annually. It reflects the results of an environmental monitoring program designed to quantify potential increases in the concentration of contaminants and potential doses to the resident human population. The Paducah Gaseous Diffusion Plant (PGDP) overall goal for environmental management is to protect the environment and PGDP`s neighbors and to maintain full compliance with all current regulations. The current environmental strategy is to identify any deficiencies and to develop a system to resolve them. The long-range goal of environmental management is to minimize the source of pollutants, reduce the generation of waste, and minimize hazardous waste by substitution of materials.

Paducah Gaseous Diffusion Plant environmental report for 1992

International Nuclear Information System (INIS)

Horak, C.M.

1993-09-01

This two-part report, Paducah Gaseous Diffusion Plant Environmental Report for 1992, is published annually. It reflects the results of an environmental monitoring program designed to quantify potential increases in the concentration of contaminants and potential doses to the resident human population. The Paducah Gaseous Diffusion Plant (PGDP) overall goal for environmental management is to protect the environment and PGDP's neighbors and to maintain full compliance with all current regulations. The current environmental strategy is to identify any deficiencies and to develop a system to resolve them. The long-range goal of environmental management is to minimize the source of pollutants, reduce the generation of waste, and minimize hazardous waste by substitution of materials

Development and evaluation of DOP generators for special uses

International Nuclear Information System (INIS)

Mielke, R.L.

1976-01-01

The Environmental Standards Group at Mound Laboratory uses ''cold'' DOP generators to produce background aerosol concentration for testing HEPA filters in clean-room operations. Two simple, portable, air-operated aerosol generators were built and tested to determine their performance. The results show the particle size distribution is in the 0.3 to 0.8 μm range and that 1 / 4 or 3 / 8 in. i.d. tubing to the nozzles should be used

Estimated values of the environmental tritium concentration and the altitude isotope effects of δD and δ18O in Hokkaido

International Nuclear Information System (INIS)

Ikeda, Mitsuyoshi; Takata, Sigeru; Matsueda, Hiroharu

1998-01-01

Tritium ( 3 H) concentration and stable isotopic ratios δD and δ 18 O are important environmental tracer data. In Hokkaido, however, hydrological studies using these data were difficult due to a lack of environmental tritium and the altitude isotope effect values. In this study, 3 H concentrations of Hokkaido wine were measured to estimate the past rain 3 H concentrations. In addition, environmental δD and δ 18 O samples taken on Mt. Daisetsuzan, the highest peak in Hokkaido, and in the Tokachi Plain were measured. The results obtained are as follows: Estimated concentrations of 3 H in Hokkaido were higher than those in Tokyo and Tsukuba, and were consistent with geographical 3 H levels in rain around Hokkaido. Some model calculations suggested that the 3 H concentrations in the 1950's and 1960's were at least 30% higher than those in Tokyo. The altitude isotope effects obtained were -1.75±0.30 per mille/100 m and -0.24±0.01 per mille/100 m for δD and δ 18 O, respectively. These values are almost the same as, or slightly lower than those in the Chubu and Tohoku districts. Using these data, the approximate age of groundwater and the altitude of original precipitation could be estimated. (author)

Energy and exergy analysis of the Kalina cycle for use in concentrated solar power plants with direct steam generation

DEFF Research Database (Denmark)

Knudsen, Thomas; Clausen, Lasse Røngaard; Haglind, Fredrik

2014-01-01

In concentrated solar power plants using direct steam generation, the usage of a thermal storage unit based only on sensible heat may lead to large exergetic losses during charging and discharging, due to a poor matching of the temperature profiles. By the use of the Kalina cycle, in which...... evaporation and condensation takes place over a temperature range, the efficiency of the heat exchange processes can be improved, possibly resulting also in improved overall performance of the system. This paper is aimed at evaluating the prospect of using the Kalina cycle for concentrated solar power plants...... with direct steam generation. The following two scenarios were addressed using energy and exergy analysis: generating power using heat from only the receiver and using only stored heat. For each of these scenarios comparisons were made for mixture concentrations ranging from 0.1 mole fraction of ammonia to 0...

The near-source impacts of diesel backup generators in urban environments

Science.gov (United States)

Tong, Zheming; Zhang, K. Max

2015-05-01

Distributed power generation, located close to consumers, plays an important role in the current and future power systems. However, its near-source impacts in complex urban environments are not well understood. In this paper, we focused on diesel backup generators that participate in demand response (DR) programs. We first improved the micro-environmental air quality simulations by employing a meteorology processor, AERMET, to generate site-specific boundary layer parameters for the Large Eddy Simulation (LES) modeling. The modeling structure was then incorporated into the CTAG model to evaluate the environmental impacts of diesel backup generators in near-source microenvironments. We found that the presence of either tall upwind or downwind building can deteriorate the air quality in the near-stack street canyons, largely due to the recirculation zones generated by the tall buildings, reducing the near-stack dispersion. Decreasing exhaust momentum ratio (stack exit velocity/ambient wind velocity) draws more exhaust into the recirculation zone, and reduces the effective stack height, which results in elevated near-ground concentrations inside downwind street canyons. The near-ground PM2.5 concentration for the worst scenarios could well exceed 100 μg m-3, posing potential health risk to people living and working nearby. In general, older diesel backup generators (i.e., Tier 1, 2 or older) without the up-to-date emission control may significantly increase the pollutant concentration in the near-source street canyons if participating in DR programs. Even generators that comply with Tier-4 standards could lead to PM hotspots if their stacks are next to tall buildings. Our study implies that the siting of diesel backup generators stacks should consider not only the interactions of fresh air intake and exhaust outlet for the building housing the backup generators, but also the dispersion of exhaust plumes in the surrounding environment.

Nuclear Power and Environment Comparative Assessment of Environmental and Health Impacts of Electricity Generating Systems

International Nuclear Information System (INIS)

Rashed, S.M.

1999-01-01

This paper deals with comparative assessment of the environmental and health impacts of nuclear and other electricity generation systems. The study including normal operations and accidents in full energy chain analysis. The comparison of the environmental impacts arising from the waste management cycles associated with non emission waste are also discussed. Nuclear Power while economically feasible and meeting 17% of the world,s demand for electricity is almost free of the air polluting gases that threaten the global climate. Comparing nuclear power with other sources for electricity generation in terms of their associated environmental releases of pollutant such as SO 2 , NOX, CO 2 , CH 4 and radioisotopes, taking into account the full fuel chains chains of supply option, nuclear power will help to reduce environmental degradation due to electricity generation activities. In view of CO 2 emission, the ranking order commences with hydro, followed by nuclear, wind and photovoltaic Power Plants. CO 2 emissions from a nuclear power plant are by two orders of magnitude lower than those of fossil fueled power plants. A consequent risk comparison between different energy sources has to include al phases of the whole energy cycle. Coal mines accidents have resulted in several 1000 acute deaths over the years. Later fatalities have never been estimated. Then came hydropower, also resulting in many catastrophes and losses of human lives. Followed oil and gas energy industry, its tribute in acute fatalities is expressed in more than 1000 life lost. No estimate is available concerning later fatalities. latest in the list is commercial nuclear energy, badly illustrated by the Chernobyl accident resulting officially in 31 acute fatalities, 145 latent fatalities, and 135000 evacuated individuals. The paper offers some findings and conclusions on the role of nuclear power in protecting the global environment

Trace elements distribution in environmental compartments

Energy Technology Data Exchange (ETDEWEB)

Queiroz, Juliana C. de; Peres, Sueli da Silva; Godoy, Maria Luiza D.P., E-mail: suelip@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2017-11-01

Trace elements term defines the presence of low concentrations metals at environment. Some of them are considered biologically essential, as Co, Cu and Mn. Others can cause detriment to environment and human health, as Pb, Cd, Hg, As, Ti and U. A large number of them have radioactive isotopes, implying the evaluation of risks for human health should be done considering the precepts of environmental radiological protection. The ecosystem pollution with trace elements generates changes at the geochemistry cycle of these elements and in environmental quality. Soils have single characteristics when compared with another components of biosphere (air, water and biota), cause they introduce themselves not only as a drain towards contaminants, but also as natural buffer that control the transport of chemical elements and other substances for atmosphere, hydrosphere and biota. The main purpose of environmental monitoring program is to evaluate the levels of contaminants in the various compartments of the environment: natural or anthropogenic, and to assess the contribution of a potential contaminant source on the environment. Elemental Composition for the collected samples was determined by inductively coupled plasma mass spectroscopy. The main objective of this work was to evaluate the map baseline of concentration of interest trace elements in environmental samples of water, sediment and soil from Environmental Monitoring Program of Instituto de Radioprotecao e Dosimetria (IRD). The samples were analyzed using an inductively coupled plasma mass spectrometer (ICP-MS) at IRD. >From the knowledge of trace elements concentrations, could be evaluated the environmental quality parameters at the studied ecosystems. The data allowed evaluating some relevant aspects of the study of trace elements in soil and aquatic systems, with emphasis at the distribution, concentration and identification of main anthropic sources of contamination at environment. (author)

Trace elements distribution in environmental compartments

International Nuclear Information System (INIS)

Queiroz, Juliana C. de; Peres, Sueli da Silva; Godoy, Maria Luiza D.P.

2017-01-01

Trace elements term defines the presence of low concentrations metals at environment. Some of them are considered biologically essential, as Co, Cu and Mn. Others can cause detriment to environment and human health, as Pb, Cd, Hg, As, Ti and U. A large number of them have radioactive isotopes, implying the evaluation of risks for human health should be done considering the precepts of environmental radiological protection. The ecosystem pollution with trace elements generates changes at the geochemistry cycle of these elements and in environmental quality. Soils have single characteristics when compared with another components of biosphere (air, water and biota), cause they introduce themselves not only as a drain towards contaminants, but also as natural buffer that control the transport of chemical elements and other substances for atmosphere, hydrosphere and biota. The main purpose of environmental monitoring program is to evaluate the levels of contaminants in the various compartments of the environment: natural or anthropogenic, and to assess the contribution of a potential contaminant source on the environment. Elemental Composition for the collected samples was determined by inductively coupled plasma mass spectroscopy. The main objective of this work was to evaluate the map baseline of concentration of interest trace elements in environmental samples of water, sediment and soil from Environmental Monitoring Program of Instituto de Radioprotecao e Dosimetria (IRD). The samples were analyzed using an inductively coupled plasma mass spectrometer (ICP-MS) at IRD. >From the knowledge of trace elements concentrations, could be evaluated the environmental quality parameters at the studied ecosystems. The data allowed evaluating some relevant aspects of the study of trace elements in soil and aquatic systems, with emphasis at the distribution, concentration and identification of main anthropic sources of contamination at environment. (author)

Health and environmental impacts of electricity generation systems: procedures for comparative assessments

International Nuclear Information System (INIS)

Demin, V.F.

2002-01-01

The IAEA technical report involving description of the Manual for procedure of comparison risk assessment (CRA) and external cost (ECA) of environmental and public health effect from nuclear energetics and other power generation is treated. CRA and ECA results depend on national and regional social-economic, geographic, medical and demographic, and other features. When using CRA and ECA procedures developed in concrete countries their adaptation is necessary for conditions of other countries [ru

Compilation of monitoring data on environmental concentration and pharmaceuticals; Zusammenstellung von Monitoringdaten zu Umweltkonzentrationen und Arzneimitteln

Energy Technology Data Exchange (ETDEWEB)

Bergmann, Axel; Fohrmann, Reinhard [IWW Rheinisch-Westfaelisches Institut fuer Wasser Beratungs- und Entwicklungsgesellschaft mbH, Muelheim an der Ruhr (Germany); Weber, Frank-Andreas [IWW Rheinisch-Westfaelisches Institut fuer Wasser Beratungs- und Entwicklungsgesellschaft mbH, Biebesheim am Rhein (Germany)

2011-10-15

In a comprehensive literature review we compiled an inventory of German and European monitoring data on the occurrence and behavior of pharmaceuticals in the environment. Environmental concentrations measured in various field campaigns and results of ecotoxicological and physico-chemical investigations were integrated in three databases. The analysis of these databases was used to identify priority pharmaceuticals and to suggest strategies for further monitoring. The database MEC reports 274 pharmaceuticals (both human and veterinary pharmaceuticals, of which 27 are metabolites), for which measured concentrations were available for one of the matrices sewage effluent, surface water, groundwater, drinking water, sewage sludge, manure, soil or sediment (10,150 database entries). The database OeKOTOX compiles 251 pharmaceuticals, for which ecotoxicological effect concentrations for at least one test organism are available in the literature and the database ''Umweltverhalten'' includes physico-chemical parameters of 183 compounds. The compiled citations of the relevant literature (1,382 citations) were provided for further use in the bibliographic software Reference Manager. The analysis of the databases shows that for only a subset of 70 pharmaceuticals measured concentrations can be evaluated based on ecotoxicological effect concentrations. The estimation of PNEC-values (Predicted No Effect Concentration) allowed for the identification of 19 pharmaceuticals with sufficient and 9 pharmaceuticals with poor ecotoxicological data which presumably endanger ecosystems in at least one river section in Germany. Special attention should be paid to ''novel'' pharmaceuticals, for which missing environmental and/or ecotoxicological data prevent a reliable risk assessment, but dramatically increasing consumption rates point to a high risk potential. The prioritization of pharmaceuticals presented by the authors considers the

Workshop on environmental and energy applications of neural networks

Energy Technology Data Exchange (ETDEWEB)

Hashem, S.

1995-03-01

This report consists of the abstracts for the papers given at the conference. Applications of neural networks in the environmental, energy and biomedical fields are discussed. Some of the topics covered are: predicting atmospheric pollutant concentrations due to fossil-fired electric power generation; hazardous waste characterization; nondestructive TRU (transuranic) waste assay; risk analysis; load forecasting for electric utilities; design of a wind power storage and generation system; nuclear fuel management; etc.

Workshop on environmental and energy applications of neural networks

International Nuclear Information System (INIS)

Hashem, S.

1995-03-01

This report consists of the abstracts for the papers given at the conference. Applications of neural networks in the environmental, energy and biomedical fields are discussed. Some of the topics covered are: predicting atmospheric pollutant concentrations due to fossil-fired electric power generation; hazardous waste characterization; nondestructive TRU (transuranic) waste assay; risk analysis; load forecasting for electric utilities; design of a wind power storage and generation system; nuclear fuel management; etc

Preliminary comparative estimate of the environmental externalities of the electrical generation in Cuba

International Nuclear Information System (INIS)

Turtos Carbonell, L.

1998-01-01

Determination of the externalises associated with the electrical generation and fundamentally its atmospherically environmental impact, win greater importance nowadays, with the objective that to medium term these could be incorporated into the economy of electricity production as the surest way to reduce this impact. In the work is accomplished a comparative preliminary estimate of the externalises of the electrical generation in Cuba based in the results obtained in the External Project (Externalises of Energy) and the emissions of the domestic Power Plant. Different processes to reduce these emissions are proposed. The economic feasibility of installing Abatement Emissions Technologies based on the calculated externalises is analyzed

Generation and Characterization of Environmentally Sensitive Variants of the β-Galactosidase from Lactobacillus delbrueckii subsp. bulgaricus

Science.gov (United States)

Yoast, Sienna; Adams, Robin M.; Mainzer, Stanley E.; Moon, Keith; Palombella, Anthony L.; Schmidt, Brian F.

1994-01-01

A method is described for generating and screening variants of the β-galactosidase from Lactobacillus delbrueckii subsp. bulgaricus sensitive to several environmental stresses, with potential application in the food industry. Chemical mutagenesis with hydroxylamine or methoxylamine was performed on the β-galactosidase gene carried on an Escherichia coli expression vector. Mutants sensitive to cold, heat, low pH, low magnesium concentration, and the presence of urea were isolated by screening for reduced color development on β-galactosidase indicator plates. The mutations responsible for three variant β-galactosidases were localized, and the base substitutions were determined by DNA sequencing. The amino acid alterations associated with one low-pH-sensitive (pHs) and two urea-sensitive (Us) variants correspond to P584L (pHs1), G400S/R479Q (Us26), and G167E/E168K/E363K/V492M (Us17), respectively. Mutant pHs1 is also heat, cold, low magnesium, and urea sensitive; Us26 is also cold sensitive; and Us17 is also low-pH sensitive. PMID:16349230

Mercury and gold concentrations of highly polluted environmental samples determined using prompt gamma-ray analysis and instrument neutron activation analysis

Science.gov (United States)

Osawa, Takahito; Hatsukawa, Yuichi; Appel, Peter W. U.; Matsue, Hideaki

2011-04-01

The authors have established a method of determining mercury and gold in severely polluted environmental samples using prompt gamma-ray analysis (PGA) and instrumental neutron activation analysis (INAA). Since large amounts of mercury are constantly being released into the environment by small-scale gold mining in many developing countries, the mercury concentration in tailings and water has to be determined to mitigate environmental pollution. Cold-vapor atomic absorption analysis, the most pervasive method of mercury analysis, is not suitable because tailings and water around mining facilities have extremely high mercury concentrations. On the other hand, PGA can determine high mercury concentrations in polluted samples as it has an appropriate level of sensitivity. Moreover, gold concentrations can be determined sequentially by using INAA after PGA. In conclusion, the analytical procedure established in this work using PGA and INAA is the best way to evaluate the degree of pollution and the tailing resource value. This method will significantly contribute to mitigating problems in the global environment.

Mercury and gold concentrations of highly polluted environmental samples determined using prompt gamma-ray analysis and instrument neutron activation analysis

International Nuclear Information System (INIS)

Osawa, Takahito; Hatsukawa, Yuichi; Appel, Peter W.U.; Matsue, Hideaki

2011-01-01

The authors have established a method of determining mercury and gold in severely polluted environmental samples using prompt gamma-ray analysis (PGA) and instrumental neutron activation analysis (INAA). Since large amounts of mercury are constantly being released into the environment by small-scale gold mining in many developing countries, the mercury concentration in tailings and water has to be determined to mitigate environmental pollution. Cold-vapor atomic absorption analysis, the most pervasive method of mercury analysis, is not suitable because tailings and water around mining facilities have extremely high mercury concentrations. On the other hand, PGA can determine high mercury concentrations in polluted samples as it has an appropriate level of sensitivity. Moreover, gold concentrations can be determined sequentially by using INAA after PGA. In conclusion, the analytical procedure established in this work using PGA and INAA is the best way to evaluate the degree of pollution and the tailing resource value. This method will significantly contribute to mitigating problems in the global environment.

Incorporating environmental constraints to electricity generation in the city of Buenos Aires

International Nuclear Information System (INIS)

Dawidowski, Laura E.; Gomez, Dario R.; Bajano, Hector; Anbinder, Gustavo D.; Rey, Francisco C.

1999-01-01

A prototype for an integrated system that includes air quality constraints to the procedure that is presently in use to determine the daily economic dispatch of power plants in Argentina is proposed. The recent incorporation of new machines to the installed capacity of the three power plants located in the densely populated metropolitan area of Buenos Aires, the thermal-based future expansion of the power sector and the relatively high nitrogen oxides concentrations that can be associated to electricity generation in the city of Buenos Aires, served to motivate this work. The prototype attempts to generate a dispatch that is compatible with the environment taking into account the present economic dispatch, weather forecast and dispersion models to evaluate ambient air concentrations of nitrogen oxides (NO x ) caused by the combined operation of the thermal power plants. Although the prototype deals exclusively with NO x , since these are the pollutants of primary concern considering the fuel consumption pattern of argentinean power plants, its structure is general enough to take into account other pollutants such as sulfur dioxide and particulate matter. (author)

Comparative assessment of the environmental impact of wastes from electricity generation systems

International Nuclear Information System (INIS)

Torres, C.; Smith, G.M.; Linsley, G.; Hossain, S.

1994-01-01

The paper describes an outline methodology for assessing and comparing the environmental impact arising from management of the wastes from nuclear and other electricity generation systems. The assessment framework is applicable to wastes from all generation systems, including nuclear, fossil and renewable fuel systems, and can also be applied to the management of mixed hazardous waste. The major energy technologies in terms of waste production can be classified according to three major categories of fuels: fossil, nuclear and renewable. The emphasis in this description is on nuclear utility low-level and mixed wastes and waste streams. The methodology may be used to support the project on Data Bases and Methodologies for Comparative Assessment of Different Energy Sources for Electricity Generation (DECADES project, (2)) which is being developed by the International Atomic Energy Agency in collaboration with other international agencies. The DECADES project has the overall objective to improve the abilities for comparative assessment of energy chains for electricity generation. The objective of a methodology such as that described here is to ensure that waste management aspects are included effectively in comparative assessments of energy systems. This paper discusses the waste strams arising from nuclear power plants

Physical activity level of three generation families. Genetic and environmental factors

Directory of Open Access Journals (Sweden)

Raquel Nichele de Chaves

2010-09-01

Full Text Available This study aims (1 to investigate the presence of familial aggregation in physical activity (PA levels and sedentary behavior (SB among members of three generations families and (2 to estimate the magnitude of additive genetic influences on PA and SB phenotypes. The sample consisted of 100 extended families covering three generations (n=1034, from the Lisbon area, Portugal. Phenotypes were assessed via the short version of the self-administered International Physical Activity Questionnaire (IPAQ-SF. Measured phenotypes: total physical activity (TPA; vigorous (VPA; moderate (MPA; walking; time spent in sitting time (ST, watching television (WT and PA levels classification. Body mass index (BMI was calculated. Exploratory family analysis in all phenotypes was conducted in PEDSTATS software. The genetic component (h2 and shared environmental effect were estimated using maximum likelihood implemented in the SOLAR software package. All graphs were done in HLM software. Sex, age, sex*age, age2, sex*age2 and BMI were used as covariates. Significant level was set at 0,05. Genetic component estimates (h2 were as follows: TPA h2=0,28±0,06 (p<0.0001; VPA h2=0,35±0,06 (p<0.0001; MPA h2=0,29±0,06 (p<0.0001; walking h2=0,40±0,06 (p<0.0001; ST h2=0,29±0,06 (p<0.0001; WT h2=0,15±0,06 (p<0.003 and determination of the level physical activity h2=0,35±0,14 (p<0.007. Shared environmental effect was not significant. These results showed a low-to-moderate genetic contribution, between 15% to 40% of the total variability, in the PA and SB phenotypes. The genetic factors have low to moderate influence in this sample. Non-shared environmental factors appear to have the major contribution in these phenotypes.

Nuclear power and the environment: comparative assessment of environmental and health impacts of electricity-generating systems

International Nuclear Information System (INIS)

Rashad, S.M.; Hammad, F.H.

2000-01-01

This paper deals with comparative assessment of the environmental and health impacts of nuclear and other electricity-generation systems. The study includes normal operations and accidents in the full energy chain analysis. The comparison of environmental impacts arising from the waste-management cycles associated with non-emission waste are also discussed. Nuclear power, while economically feasible and meeting 17% of the world's demand for electricity, is almost free of the air polluting gases that threaten the global climate. Comparing nuclear power with other sources for electricity generation in terms of their associated environmental releases of pollutant such as SO 2 , NOx, CO 2 CH 4 and radioisotopes, taking into account the full fuel chains of supply option, nuclear power will help to reduce environmental degradation due to electricity generation activities. In view of CO 2 emission, the ranking order commences with hydro, followed by nuclear, wind and photovoltaic power plants. CO 2 emissions from a nuclear power plant are by two order of magnitude lower than those of fossil-fuelled power plants. A consequent risk comparison between different energy sources has to include all phases of the whole energy cycle. Coal mine accidents have resulted in several 1000 acute deaths over the years. Then came hydropower, also resulting in many catastrophes and loss of human lives, followed by the oil and gas energy industries, last in the list is commercial nuclear energy, which has had a 'bad' press because of the Chernobyl accidents, resulting officially in 31 acute fatalities, and at least 145 latent fatalities. The paper offers some findings and conclusions on the role of nuclear power in protecting the global environment. (Author)

Environmental toxicity and radioactivity assessment of a titanium-processing residue with potential for environmental use.

Science.gov (United States)

Wendling, Laura A; Binet, Monique T; Yuan, Zheng; Gissi, Francesca; Koppel, Darren J; Adams, Merrin S

2013-07-01

Thorough examination of the physicochemical characteristics of a Ti-processing residue was undertaken, including mineralogical, geochemical, and radiochemical characterization, and an investigation of the environmental toxicity of soft-water leachate generated from the residue. Concentrations of most metals measured in the leachate were low; thus, the residue is unlikely to leach high levels of potentially toxic elements on exposure to low-ionic strength natural waters. Relative to stringent ecosystem health-based guidelines, only chromium concentrations in the leachate exceeded guideline concentrations for 95% species protection; however, sulfate was present at concentrations known to cause toxicity. It is likely that the high concentration of calcium and extreme water hardness of the leachate reduced the bioavailability of some elements. Geochemical modeling of the leachate indicated that calcium and sulfate concentrations were largely controlled by gypsum mineral dissolution. The leachate was not toxic to the microalga Chlorella sp., the cladoceran Ceriodaphnia dubia, or the estuarine bacterium Vibrio fischeri. The Ti-processing residue exhibited an absorbed dose rate of 186 nGy/h, equivalent to an annual dose of 1.63 mGy and an annual effective dose of 0.326 mGy. In summary, the results indicate that the Ti-processing residue examined is suitable for productive use as an environmental amendment following 10 to 100 times dilution to ameliorate potential toxic effects due to chromium or sulfate. Copyright © 2013 SETAC.

Influence of environmental factors on the concentration of phenolic compounds in leaves of Lafoensia pacari

Directory of Open Access Journals (Sweden)

Bruno Leite Sampaio

2011-09-01

Full Text Available Lafoensia pacari A. St.-Hil., Lythraceae, a plant from the Cerrado known as pacari or dedaleiro, is widely used as an antipyretic, wound healing, anti-inflammatory, antidiarrheal and in the treatment of gastritis and cancer. Notable among the metabolite groups identified in leaves of L. pacari are the polyphenols, such as tannins and flavonoids, related to the pharmacological activities of pacari. Studies on the influence of environmental factors over production of major groups of secondary metabolites in pacari are important because they contribute data for its cultivation and harvest, and establish quantitative parameters of secondary metabolites in the plant drug. The objective of this study was to evaluate the influence of environmental factors on concentrations of phenolic metabolites in the leaves of L. pacari. Compounds quantified in the leaves were: total phenols, tannins by protein precipitation, hydrolysable tannins, total flavonoids, ellagic acid and mineral nutrients, while soil fertility was also analyzed, all over a period of one year. The data were analyzed using multivariate analysis, and the results suggest that metabolite concentrations in the leaves of this plant are influenced by seasonal factors, in particular the temperature and foliar micronutrients (Cu, Fe, Mn, Zn.

Influence of environmental factors on the concentration of phenolic compounds in leaves of Lafoensia pacari

Directory of Open Access Journals (Sweden)

Bruno Leite Sampaio

2011-12-01

Full Text Available Lafoensia pacari A. St.-Hil., Lythraceae, a plant from the Cerrado known as pacari or dedaleiro, is widely used as an antipyretic, wound healing, anti-inflammatory, antidiarrheal and in the treatment of gastritis and cancer. Notable among the metabolite groups identified in leaves of L. pacari are the polyphenols, such as tannins and flavonoids, related to the pharmacological activities of pacari. Studies on the influence of environmental factors over production of major groups of secondary metabolites in pacari are important because they contribute data for its cultivation and harvest, and establish quantitative parameters of secondary metabolites in the plant drug. The objective of this study was to evaluate the influence of environmental factors on concentrations of phenolic metabolites in the leaves of L. pacari. Compounds quantified in the leaves were: total phenols, tannins by protein precipitation, hydrolysable tannins, total flavonoids, ellagic acid and mineral nutrients, while soil fertility was also analyzed, all over a period of one year. The data were analyzed using multivariate analysis, and the results suggest that metabolite concentrations in the leaves of this plant are influenced by seasonal factors, in particular the temperature and foliar micronutrients (Cu, Fe, Mn, Zn.

Multi-generation cadmium acclimation and tolerance in Daphnia magna Straus

International Nuclear Information System (INIS)

Muyssen, Brita T.A.; Janssen, Colin R.

2004-01-01

The cladoceran Daphnia magna was acclimated for seven generations to cadmium concentrations ranging from 0 (control) to 250 μg/l Cd (corresponding to a free ion activity of 4.60 nM Cd 2+ ). Acute and chronic cadmium tolerance as well as cadmium accumulation were monitored as a function of acclimation time. After two to three generations of acclimation to concentrations ranging from 0.23 to 1.11 nM Cd 2+ increases in acute tolerance were maximal (factor 7.2) and significant. Acclimation for seven generations to the same acclimation concentrations did result in an increased chronic cadmium tolerance (21 days EC 50 values increased). Organisms acclimated to 1.93 nM Cd 2+ were equally or more sensitive than non-acclimated daphnids in acute and chronic toxicity tests. Cadmium contents in D. magna increased significantly as a function of the acclimation concentration. Maximum body burdens of 236±30 μg Cd/g dry weight were measured in organisms exposed to 4.60 nM Cd 2+ , but detoxification mechanisms were only successful up to 82±20 μg Cd/g dry weight as this concentration did not cause major decreases in survival and reproduction in chronic toxicity tests. As the potential positive effect of acclimation on cadmium tolerance disappeared with successive acclimation generations and increasing acclimation concentrations, it is concluded that multi-generation acclimation studies are important for the evaluation of the long-term effects of environmental toxicants. - Multi-generation acclimation studies are important for evaluating long-term effects of aquatic pollutants

Fuzzy possibilistic model for medium-term power generation planning with environmental criteria

International Nuclear Information System (INIS)

Muela, E.; Schweickardt, G.; Garces, F.

2007-01-01

The aim of this paper is to apply a fuzzy possibilistic model to the power generation planning that includes environmental criteria. Since it is not always meaningful to relate uncertainty to frequency, the proposed approach analyzes the imprecision and ambiguity into the decision making, especially when the system involves human subjectivity. This paper highlights the subjacent differences between fuzzy and possibilistic entities. Additionally, it illustrates the use of fuzzy sets theory and possibility theory for modeling flexibility, and nonprobablistic uncertainty, respectively. The necessity of a new direction for the environmental problem in a power system is outlined, an approach that attempts a greater integral quality of planning instead of searching for a simple optimal solution. This process must be consistent with a wider and more suitable interpretation about both the problem as such and the concept of solution in uncertain situations

Algal and aquatic plant carbon concentrating mechanisms in relation to environmental change.

Science.gov (United States)

Raven, John A; Giordano, Mario; Beardall, John; Maberly, Stephen C

2011-09-01

Carbon dioxide concentrating mechanisms (also known as inorganic carbon concentrating mechanisms; both abbreviated as CCMs) presumably evolved under conditions of low CO(2) availability. However, the timing of their origin is unclear since there are no sound estimates from molecular clocks, and even if there were, there are no proxies for the functioning of CCMs. Accordingly, we cannot use previous episodes of high CO(2) (e.g. the Palaeocene-Eocene Thermal Maximum) to indicate how organisms with CCMs responded. Present and predicted environmental change in terms of increased CO(2) and temperature are leading to increased CO(2) and HCO(3)(-) and decreased CO(3)(2-) and pH in surface seawater, as well as decreasing the depth of the upper mixed layer and increasing the degree of isolation of this layer with respect to nutrient flux from deeper waters. The outcome of these forcing factors is to increase the availability of inorganic carbon, photosynthetic active radiation (PAR) and ultraviolet B radiation (UVB) to aquatic photolithotrophs and to decrease the supply of the nutrients (combined) nitrogen and phosphorus and of any non-aeolian iron. The influence of these variations on CCM expression has been examined to varying degrees as acclimation by extant organisms. Increased PAR increases CCM expression in terms of CO(2) affinity, whilst increased UVB has a range of effects in the organisms examined; little relevant information is available on increased temperature. Decreased combined nitrogen supply generally increases CO(2) affinity, decreased iron availability increases CO(2) affinity, and decreased phosphorus supply has varying effects on the organisms examined. There are few data sets showing interactions amongst the observed changes, and even less information on genetic (adaptation) changes in response to the forcing factors. In freshwaters, changes in phytoplankton species composition may alter with environmental change with consequences for frequency of

Municipal solid waste generation and disposal in Robe town, Ethiopia.

Science.gov (United States)

Erasu, Duguma; Faye, Tesfaye; Kiros, Amaha; Balew, Abel

2018-04-20

The amount of solid waste generated in developing countries is rising from time to time due to economic growth, change in consumer behavior and lifestyles of people. But it is hard to manage and handle the increase of solid waste with existing waste management infrastructure. Thus, the management system of solid waste is very poor and become a serious problem. The main purpose of this study is to quantify the volume of solid waste generated and investigate factors affecting generation and disposal of wastes in the study area. The result of this study indicated that total waste generated from households was about 97.092kg/day.Furthermore, the study reveals that the solid waste generation rate of the town is 0.261kg/person/day.About 57.5% of solid waste is properly disposed of to landfill site whereas the remaining 42.5% is illegally dumped at the roadsides and open fields. Implication Statement Nowadays, in developing countries there is high concentration of people in urban areas and cause for the generation of enormous concentration of municipal waste in urban areas. Therefore this finding will be important for various policy makers and town planners. It may also serve as a benchmark for the municipal authorities of the town for whom the problem is still invisible and negligible and can push environmental protection authorities to reexamine the implementation of their policies and strategies with regard to the broader issues of human and environmental health condition of town dwellers.

Combustion technology developments in power generation in response to environmental challenges

Energy Technology Data Exchange (ETDEWEB)

BeerBeer, J.M. [Massachusetts Inst. of Technology, Dept. of Chemical Engineering, Cambridge, MA (United States)

2000-07-01

Combustion system development in power generation is discussed ranging from the pre-environmental era in which the objectives were complete combustion with a minimum of excess air and the capability of scale up to increased boiler unit performances, through the environmental era (1970-), in which reduction of combustion generated pollution was gaining increasing importance, to the present and near future in which a combination of clean combustion and high thermodynamic efficiency is considered to be necessary to satisfy demands for CO{sub 2} emissions mitigation. From the 1970's on, attention has increasingly turned towards emission control technologies for the reduction of oxides of nitrogen and sulfur, the so-called acid rain precursors. By a better understanding of the NO{sub x} formation and destruction mechanisms in flames, it has become possible to reduce significantly their emissions via combustion process modifications, e.g. by maintaining sequentially fuel-rich and fuel-lean combustion zones in a burner flame or in the combustion chamber, or by injecting a hydrocarbon rich fuel into the NO{sub x} bearing combustion products of a primary fuel such as coal. Sulfur capture in the combustion process proved to be more difficult because calcium sulfate, the reaction product of SO{sub 2} and additive lime, is unstable at the high temperature of pulverised coal combustion. It is possible to retain sulfur by the application of fluidised combustion in which coal burns at much reduced combustion temperatures. Fluidised bed combustion is, however, primarily intended for the utilisation of low grade, low volatile coals in smaller capacity units, which leaves the task of sulfur capture for the majority of coal fired boilers to flue gas desulfurisation. During the last decade, several new factors emerged which influenced the development of combustion for power generation. CO{sub 2} emission control is gaining increasing acceptance as a result of the international

Effects of tributyltin (TBT) on Xenopus tropicalis embryos at environmentally relevant concentrations.

Science.gov (United States)

Guo, Suzhen; Qian, Lijuan; Shi, Huahong; Barry, Terence; Cao, Qinzhen; Liu, Junqi

2010-04-01

Tributyltin (TBT) has been widely used as a biocide in antifouling paints and is a known endocrine disrupting chemical. In this paper, we exposed embryos of Xenopus tropicalis to 50-400ngL(-1) tributyltin chloride. TBT significantly decreased the survival rate, reduced the body length and retarded the development of embryos after 24, 36 and 48h of exposure. These effects of TBT were concentration- and time-dependent. Embryos treated with TBT showed multiple malformations. The most obvious alterations were abnormal eyes, enlarged proctodaeum, narrow fins, and skin hypopigmentation. Enlarged proctodaeum and narrow fins were mainly observed after 36 and 48h of exposure. The loss of eye pigmentation or the absence of external eyes occurred after 24 and 36h of exposure, while extended lenses or edemas of eyes were more commonly observed after 48h of exposure. Additional malformations included: small anterior region of heads, pericardial edemas, enlarged trunks, and bent tails. These results suggested that TBT is very toxic to X. tropicalis embryos at environmentally relevant concentrations.

Measurements of environmental radon - 222 concentrations in indoors and outdoors in Egypt

International Nuclear Information System (INIS)

Kenawy, M.A.; Morsey, A.A.; Kotb, M.A.; Osman, A.; El-Haag, A.

1990-01-01

The major contribution to population exposure from natural radiation arises from the inhalation of the decay products of radon. Substantial surveys are being conducted by several investigators to estimate the indoor and outdoor exposure nationally and to discover regional variations. In this work, radon concentration in the indoors and outdoor air was determined using the can technique and employing CR-39 solid state nuclear track detector for lengthy exposures. The range of radon - 222 activity in this survey was 54 -299 PCi.m -3 in Cairo, 22 - 171 PCi.m -3 in Alexandria and 89 - 370 PCi.m -3 in Asiut. Measurements carried out in Aswan and Sinai ranged between 98 - 411 PCi.m -3 . Values of indoors and outdoors radon concentrations were found to vary with time of day, geographic location, season and height above ground. Further work is going on to study the different parameters affecting the levels of the environmental radon. The national survey and associated studies is expected to yield data that may correlate radon activity with some respiratory diseases, particularly lung cancer. (author). 7 refs, 5 figs

The expected environmental consequences and hazards of laser-fusion electric generating stations

International Nuclear Information System (INIS)

Devaney, J.J.; Pendergrass, J.H.

The operation of an expected early form of a laser-fusion electric power plant is described and the hazards and the environmental effects of such a station are estimated. Possible environmental impacts and hazards to mankind can occur from nuclear excursions or explosions, nuclear weapon proliferation, loss of coolant accident (LOCA), tritium releases, chemical fires and accompanying releases of radioactivity or chemicals, induced radioactivity releases (other than tritium), radioactive waste disposal, lasers, normal electrical generation and steam plant effects, external intrusions, natural disasters, land use, resource and transportation use, thermal pollution, and air and water pollution. We find the principle environmental effects to be those of a medium size chemical plant. Electric, magnetic, steam, and radioactive hazards are of a lower order. Indeed in the event of extraordinary success in getting high temperatures and densities so that more difficult nuclear species can be reacted, such as protons with boron-11, there will be no radioactivity at all and also enormously lower hazardous chemical inventories. In our plant designs, for any fusion fuels, nuclear explosions (or even excursions beyond design limits) are not possible. (author)

Environmental Performance of Electricity Generation Based on Resources: A Life Cycle Assessment Case Study in Turkey

Directory of Open Access Journals (Sweden)

Zerrin Günkaya

2016-10-01

Full Text Available The aim of this paper was to determine how to change the environmental performance of electricity generation depending on the resources and their shares, in order to support decision-makers. Additionally, this paper presents an application of life cycle assessment (LCA methodology to determine the environmental burdens of electricity generation in Turkey. Electricity generation data in Turkey for the years 2012 and 2023 were used as a case study. The functional unit for electricity generation was 1 kWh. The LCA calculations were carried out using CML-IA (v3.00 data and the results were interpreted with respect to Monte Carlo simulation analysis (with the Monte Carlo function built in SimaPro 8.0.1 software. The results demonstrated that the fossil fuel consumption not only contributes to global warming, but it also has effects on the elemental basis of abiotic depletion due to raw material consumption for plant infrastructure. Additionally, it was observed that the increasing proportion of wind power in the electricity mix would also increase certain life cycle impacts (such as the elemental basis of abiotic depletion, human ecotoxicity, and terrestrial ecotoxicity in Turkey’s geography compared to increasing the share of other renewable energy sources, such as hydropower, geothermal, as well as solar.

The environmental interactions of tidal and wave energy generation devices

International Nuclear Information System (INIS)

Frid, Chris; Andonegi, Eider; Depestele, Jochen; Judd, Adrian; Rihan, Dominic; Rogers, Stuart I.; Kenchington, Ellen

2012-01-01

Global energy demand continues to grow and tidal and wave energy generation devices can provide a significant source of renewable energy. Technological developments in offshore engineering and the rising cost of traditional energy means that offshore energy resources will be economic in the next few years. While there is now a growing body of data on the ecological impacts of offshore wind farms, the scientific basis on which to make informed decisions about the environmental effects of other offshore energy developments is lacking. Tidal barrages have the potential to cause significant ecological impacts particularly on bird feeding areas when they are constructed at coastal estuaries or bays. Offshore tidal stream energy and wave energy collectors offer the scope for developments at varying scales. They also have the potential to alter habitats. A diversity of designs exist, including floating, mid-water column and seabed mounted devices, with a variety of moving-part configurations resulting in a unique complex of potential environmental effects for each device type, which are discussed to the extent possible. - Highlights: ► We review the environmental impacts of tidal barrages and fences, tidal stream farms and wave energy capture devices. ► Impacts on habitats, species and the water column, and effects of noise and electromagnetic fields are considered. ► Tidal barrages can cause significant impacts on bird feeding areas when constructed at coastal estuaries or bays. ► Wave energy collectors can alter water column and sea bed habitats locally and over large distances.

The environmental interactions of tidal and wave energy generation devices

Energy Technology Data Exchange (ETDEWEB)

Frid, Chris, E-mail: c.l.j.frid@liv.ac.uk [School of Environmental Sciences, University of Liverpool, Crown Street, Liverpool, L69 7ZB (United Kingdom); Andonegi, Eider, E-mail: eandonegi@azti.es [AZTI-Tecnalia, Txatxarramendi ugartea, z/g E-48395 Sukarrieta (Bizkaia) (Spain); Depestele, Jochen, E-mail: jochen.depestele@ilvo.vlaanderen.be [Institute for Agricultural and Fisheries Research, Ankerstraat 1, B-8400 Oostende (Belgium); Judd, Adrian, E-mail: Adrian.Judd@cefas.co.uk [Centre for Environment, Fisheries and Aquaculture Science , Lowestoft Laboratory, Pakefield Road, Lowestoft NR33 0HT United Kingdom (United Kingdom); Rihan, Dominic, E-mail: Dominic.RIHAN@ec.europa.eu [Irish Sea Fisheries Board, P.O. Box 12 Dun Laoghaire, Co. Dublin (Ireland); Rogers, Stuart I., E-mail: stuart.rogers@cefas.co.uk [Centre for Environment, Fisheries and Aquaculture Science , Lowestoft Laboratory, Pakefield Road, Lowestoft NR33 0HT United Kingdom (United Kingdom); Kenchington, Ellen, E-mail: Ellen.Kenchington@dfo-mpo.gc.ca [Fisheries and Oceans Canada, Bedford Institute of Oceanography, P.O. Box 1006, Dartmouth Canada, NS B2Y 4A2 (Canada)

2012-01-15

Global energy demand continues to grow and tidal and wave energy generation devices can provide a significant source of renewable energy. Technological developments in offshore engineering and the rising cost of traditional energy means that offshore energy resources will be economic in the next few years. While there is now a growing body of data on the ecological impacts of offshore wind farms, the scientific basis on which to make informed decisions about the environmental effects of other offshore energy developments is lacking. Tidal barrages have the potential to cause significant ecological impacts particularly on bird feeding areas when they are constructed at coastal estuaries or bays. Offshore tidal stream energy and wave energy collectors offer the scope for developments at varying scales. They also have the potential to alter habitats. A diversity of designs exist, including floating, mid-water column and seabed mounted devices, with a variety of moving-part configurations resulting in a unique complex of potential environmental effects for each device type, which are discussed to the extent possible. - Highlights: Black-Right-Pointing-Pointer We review the environmental impacts of tidal barrages and fences, tidal stream farms and wave energy capture devices. Black-Right-Pointing-Pointer Impacts on habitats, species and the water column, and effects of noise and electromagnetic fields are considered. Black-Right-Pointing-Pointer Tidal barrages can cause significant impacts on bird feeding areas when constructed at coastal estuaries or bays. Black-Right-Pointing-Pointer Wave energy collectors can alter water column and sea bed habitats locally and over large distances.

A review of environmental governance and its effects on concentrate discharge from desalination plants in the Kingdom of Saudi Arabia

KAUST Repository

Van Der Merwe, Riaan

2013-01-01

The most likely environmental impact of concentrate discharges (in most instances twice the concentration of the ambient environment) leaking from desalination plants on local marine ecosystems has been controversially discussed for many years. Increasing water demand and lack of renewable natural water resources in Saudi Arabia also result in greater dependence on desalination and consequently amplify the impact on marine environment and multifactorial ecosystems in near-field areas of desalination discharges. Accurate scientific baseline data should furnish information on various factors such as intake- and outfall locality, brine (concentrate) discharge and chemical characteristics (i.e. effluent concentration, mass flow rates (flux)), local effects, and even cumulative effects of desalination activities, at least on a regional and even on a national scale. Even if such data were available, in many cases they are non-transparent and are not even accessible, or tend to be overlooked as a result of ambiguous desalination-related policies. This paper focuses on national environmental regulations in the Kingdom of Saudi Arabia (KSA) and how such regulations help control the flow of concentrate discharge into the receiving waters. © 2013 Desalination Publications.

Maximum Permissible Concentrations and Negligible Concentrations for pesticides

NARCIS (Netherlands)

Crommentuijn T; Kalf DF; Polder MD; Posthumus R; Plassche EJ van de; CSR

1997-01-01

Maximum Permissible Concentrations (MPCs) and Negligible Concentrations (NCs) derived for a series of pesticides are presented in this report. These MPCs and NCs are used by the Ministry of Housing, Spatial Planning and the Environment (VROM) to set Environmental Quality Objectives. For some of the

Blood lead concentration and related factors in Korea from the 2008 National Survey for Environmental Pollutants in the Human Body.

Science.gov (United States)

Jeong, Seong Wook; Lee, Chae Kwan; Suh, Chun Hui; Kim, Kun Hyung; Son, Byung Chul; Kim, Jeong Ho; Lee, Jong Tae; Lee, Soo Woong; Park, Yeong Beom; Lee, Jong Wha; Yu, Seung-Do; Moon, Chan Seok; Kim, Dae Hwan; Lee, Sang Yoon

2014-11-01

This study evaluated blood lead concentrations in the Korean general population and the correlation between various exposure sources using data from the 2008 Korea National Survey for Environmental Pollutants in the Human Body (National Institute of Environmental Research, Korea). The general and occupational characteristics were gathered from 5136 participants who were 20 years of age and older using a structured questionnaire. Blood lead concentrations were analyzed using an atomic absorption spectrophotometer. Statistical analysis was performed using multiple linear regressions of the log lead concentrations to the independent variables such as age, gender, smoke, herbal medication and drug consumption, drinking water, and living area. Geometric mean (GM) blood lead concentrations in Korean adults were 19.7 μg/l. The blood lead concentrations increased with age; the highest concentrations were found in the 50-69-year age group (pdrug consumption were higher than those who did not (plead concentration (plead concentration (plead concentration, but not significantly. For drinking water, the underground water (spring or well water) drinking group had higher concentrations than other types of water drinking groups, but not significantly (p=0.063). The blood lead concentrations by occupation were significant (plead concentrations tended to decrease with increasing delivery times, but not significantly. The blood lead concentration (GM) of the general adult population in Korea has decreased over time from 45.8 μg/l (1999) to 19.7 μg/l (2008). Although it is still higher than in other countries such as the United States and Canada, it is rapidly decreasing. Gender, age, smoking and alcohol drinking status, herbal medication and drug consumption, education level, living area and occupation were significantly related to the blood lead concentrations in Korea. Copyright © 2014. Published by Elsevier GmbH.

Factors affecting 210Po and 210Pb activity concentrations in mussels and implications for environmental bio-monitoring programmes

International Nuclear Information System (INIS)

Carvalho, Fernando P.; Oliveira, Joao M.; Alberto, G.

2011-01-01

The activity of 210 Po and 210 Pb was determined in mussels of the same size (3.5-4.0 cm shell length) sampled monthly over a 17-month period at the Atlantic coast of Portugal. Average radionuclide concentration values in mussels were 759 ± 277 Bq kg -1 for 210 Po (range 460-1470 Bq kg -1 dry weight), and 45 ± 19 Bq kg -1 for 210 Pb (range 23-96 Bq kg -1 dry weight). Environmental parameters and mussel biometric parameters were monitored during the same period. Although there was no seasonal variation of radionuclide concentrations in sea water during the study period, the concentration of radionuclide activity in mussels varied seasonally displaying peaks of high concentrations in winter and low concentrations in summer. Analysis of radionuclide data in relation to the physiological Condition Index of mussels revealed that 210 Po and 210 Pb activities in the mussel (average activity per individual) remained nearly constant during the investigation period, while mussel body weight fluctuated due to fat storage/expenditure in the soft tissues. Similar variation of radionuclide concentrations was observed in mussels transplanted from the sea coast into the Tejo Estuary. However, under estuarine environmental conditions and with higher food availability throughout the year, transplanted mussel Condition Index was higher than in coastal mussels and average radionuclide concentrations were 210 ± 75 Bq kg -1 (dry weight) for 210 Po and 10 ± 4 Bq kg -1 (dry weight) for 210 Pb, therefore lower than in coastal mussels with similar shell length. It is concluded that the apparent seasonal fluctuation and inter-site difference of radionuclide concentrations were mostly caused by mussel body weight fluctuation and not by radionuclide body burden fluctuation. This interpretation can be extended to the apparent seasonal fluctuation in concentrations of lipophilic and lipophobic contaminants in mussels, and provides an explanation for occasional high concentrations of 210 Po

Effect of crevice environment PH on corrosion damage of horizontal steam generator tubes

International Nuclear Information System (INIS)

Brozova, A.; Burda, J.; Splichal, K.

2002-01-01

In support of a project on lifetime calculation experiments were carried out to evaluate the resistance to environmentally assisted cracking (EAC) of steam generator tubes during operation. Estimations of the incubation period for crack initiation and the threshold K value, K Iscc , and the crack growth rate were made to predict evolution of damage in tube walls. The paper summarizes results of experiments of C ring specimen for the initiation testing and results of SENT (single edge notch tensile) specimen for the crack growth rate (CGR) testing. The specimens were exposed to concentrated environments at elevated temperatures simulating crevice environments in secondary side crevices in horizontal steam generators. The results show that the material of SG tubes is sensitive to transgranular environmentally assisted cracking in the three basic concentrated environments used, alkaline, neutral and acid. The most corrosive medium was the acid environment. The crack initiated practically immediately after acid environment exposure. The initiation process takes a long time in neutral and alkaline environments. The K Iscc values for environmentally assisted crack growth rate in alkaline and neutral concentrated environment were essentially the same. The crack growth rate was slightly higher for the neutral environment than for the alkaline one. Fracture patterns for the both environments were similar. (author)

Enhancing effect of marine oligotrophy on environmental concentrations of particle-reactive trace elements

International Nuclear Information System (INIS)

Jeffree, R.A.; Szymczak, R.

2000-01-01

A biogeochemical model has been previously developed that explains the inverse and nonlinear relationship between Po-210 concentration in zooplankton and their biomass, under oligotrophic conditions in French Polynesia. In this study the model structure was reviewed to determine a set of biogeochemical behaviors of Po-210, proposed to be critical to its environmental enhancement under oligotrophy: this set was then used to identify 25 other elements with comparable behaviors to Po-210. Field investigation in the Timor Sea showed that four of these a priori identified elements, viz. Cd, Co, Pb, and Mn as well as Cr and Ni, showed elevated water concentrations with reduced particle removal rates in the euphotic zone, results that are consistent with those previously obtained for Po-210 and the proposed explanatory model. These findings point to the enhanced susceptibility to contamination with particle-reactive elements of oligotrophic marine systems, whose degree and geographic extent may be enhanced by projected increases in sea surface temperatures from global warming

DARTAB: a program to combine airborne radionuclide environmental exposure data with dosimetric and health effects data to generate tabulations of predicted health impacts

International Nuclear Information System (INIS)

Begovich, C.L.; Eckerman, K.F.; Schlatter, E.C.; Ohr, S.Y.; Chester, R.O.

1981-08-01

The DARTAB computer code combines radionuclide environmental exposure data with dosimetric and health effects data to generate tabulations of the predicted impact of radioactive airborne effluents. DARTAB is independent of the environmental transport code used to generate the environmental exposure data and the codes used to produce the dosimetric and health effects data. Therefore human dose and risk calculations need not be added to every environmental transport code. Options are included in DARTAB to permit the user to request tabulations by various topics (e.g., cancer site, exposure pathway, etc.) to facilitate characterization of the human health impacts of the effluents. The DARTAB code was written at ORNL for the US Environmental Protection Agency, Office of Radiation Programs

Excluded volume effects caused by high concentration addition of acid generators in chemically amplified resists used for extreme ultraviolet lithography

Science.gov (United States)

Kozawa, Takahiro; Watanabe, Kyoko; Matsuoka, Kyoko; Yamamoto, Hiroki; Komuro, Yoshitaka; Kawana, Daisuke; Yamazaki, Akiyoshi

2017-08-01

The resolution of lithography used for the high-volume production of semiconductor devices has been improved to meet the market demands for highly integrated circuits. With the reduction in feature size, the molecular size becomes non-negligible in the resist material design. In this study, the excluded volume effects caused by adding high-concentration acid generators were investigated for triphenylsulfonium nonaflate. The resist film density was measured by X-ray diffractometry. The dependences of absorption coefficient and protected unit concentration on acid generator weight ratio were calculated from the measured film density. Using these values, the effects on the decomposition yield of acid generators, the protected unit fluctuation, and the line edge roughness (LER) were evaluated by simulation on the basis of sensitization and reaction mechanisms of chemically amplified extreme ultraviolet resists. The positive effects of the increase in acid generator weight ratio on LER were predominant below the acid generator weight ratio of 0.3, while the negative effects became equivalent to the positive effects above the acid generator weight ratio of 0.3 owing to the excluded volume effects.

Steam-treated wood pellets: Environmental and financial implications relative to fossil fuels and conventional pellets for electricity generation

International Nuclear Information System (INIS)

McKechnie, Jon; Saville, Brad; MacLean, Heather L.

2016-01-01

Highlights: • Steam-treated pellets can greatly reduce greenhouse gas emissions relative to coal. • Cost advantage is seen relative to conventional pellets. • Higher pellet cost is more than balanced by reduced retrofit capital requirements. • Low capacity factors further favour steam-treated pellets over conventional pellets. - Abstract: Steam-treated pellets can help to address technical barriers that limit the uptake of pellets as a fuel for electricity generation, but there is limited understanding of the cost and environmental impacts of their production and use. This study investigates life cycle environmental (greenhouse gas (GHG) and air pollutant emissions) and financial implications of electricity generation from steam-treated pellets, including fuel cycle activities (biomass supply, pellet production, and combustion) and retrofit infrastructure to enable 100% pellet firing at a generating station that previously used coal. Models are informed by operating experience of pellet manufacturers and generating stations utilising coal, steam-treated and conventional pellets. Results are compared with conventional pellets and fossil fuels in a case study of electricity generation in northwestern Ontario, Canada. Steam-treated pellet production has similar GHG impacts to conventional pellets as their higher biomass feedstock requirement is balanced by reduced process electricity consumption. GHG reductions of more than 90% relative to coal and ∼85% relative to natural gas (excluding retrofit infrastructure) could be obtained with both pellet options. Pellets can also reduce fuel cycle air pollutant emissions relative to coal by 30% (NOx), 97% (SOx), and 75% (PM 10 ). Lesser retrofit requirements for steam-treated pellets more than compensate for marginally higher pellet production costs, resulting in lower electricity production cost compared to conventional pellets ($0.14/kW h vs. $0.16/kW h). Impacts of retrofit infrastructure become increasingly

Estimating maquiladora hazardous waste generation on the U.S./Mexico border

Science.gov (United States)

Bowen, Mace M.; Kontuly, Thomas; Hepner, George F.

1995-03-01

Maquiladoras, manufacturing plants that primarily assemble foreign components for reexport, are located in concentrations along the northern frontier of the US/Mexico border. These plants process a wide variety of materials using modern industrial technologies within the context of developing world institutions and infrastructure. Hazardous waste generation by maquiladoras represents a critical environmental management issue because of the spatial concentration of these plants in border municipalities where the infrastructure for waste management is nonexistent or poor. These border municipalities contain rapidly increasing populations, which further stress their waste handling infrastructure capacities while exposing their populations to greater contaminant risks. Limited empirical knowledge exists concerning hazardous waste types and generation rates from maquiladorsas. There is no standard reporting method for waste generation or methodology for estimating generation rates at this time. This paper presents a method that can be used for the rapid assessment of hazardous waste generation. A first approximation of hazardous waste generation is produced for maquiladoras in the three municipalities of Nogales, Sonora, Mexicali, Baja California, and Cd. Juarez, Chihuahua, using the INVENT model developed by the World Bank. In addition, our intent is to evaluate the potential of the INVENT model for adaptation to the US/Mexico border industrial situation. The press of border industrial development, especially with the recent adoption of the NAFTA, make such assessments necessary as a basis for the environmental policy formulation and management needed in the immediate future.

Environmental impact assessment screening tool

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-05-01

An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities. 2 figs. 7 refs.

Environmental impact assessment screening tool

International Nuclear Information System (INIS)

1995-05-01

An environmental assessment and impact planning software, SCREENER, was tested at a pilot project at the Cameco site (Port Hope). SCREENER was used to screen the impacts of a new construction project in accordance with the process and reporting requirements laid out in the Canadian Environmental Assessment Act. The software test concentrated on the activities that are directly involved with the structure construction and site preparation activities. In addition, a two and one half day training course was given to three AECB staff using the test case as a hands on example. The conclusion of this project is that an automated tool such as SCREENER (or Calyx, the new generation of environmental assessment tools from ESSA Software Ltd.), will help the AECB to standardize the approach to environmental assessment, assist in project planning, and save resources in the screening process. The new approach could allow to allocate AECB limited resources to the detailed assessments required for maximum impact activities

Blood cadmium concentrations and environmental exposure sources in newcomer South and East Asian women in the Greater Toronto Area, Canada

International Nuclear Information System (INIS)

Wiseman, C.L.S.; Parnia, A.; Chakravartty, D.; Archbold, J.; Zawar, N.; Copes, R.; Cole, D.C.

2017-01-01

Background: Immigrant women are often identified as being particularly vulnerable to environmental exposures and health effects. The availability of biomonitoring data on newcomers is limited, thus, presenting a challenge to public health practitioners in the identification of priorities for intervention. Objectives: In fulfillment of data needs, the purpose of this study was to characterize blood concentrations of cadmium (Cd) among newcomer women of reproductive age (19–45 years of age) living in the Greater Toronto Area (GTA), Canada and to assess potential sources of environmental exposures. Methods: A community-based model, engaging peer researchers from the communities of interest, was used for recruitment and follow-up purposes. Blood samples were taken from a total of 211 newcomer women from South and East Asia, representing primary, regional origins of immigrants to the GTA, and environmental exposure sources were assessed via telephone survey. Metal concentrations were measured in blood samples (diluted with 0.5% (v/v) ammonium hydroxide and 0.1% (v/v) octylphenol ethoxylate) using a quadrupole ICP-MS. Survey questions addressed a wide range of environmental exposure sources, including dietary and smoking patterns and use of nutritional supplements, herbal products and cosmetics. Results: A geometric mean (GM) blood Cd concentration of 0.39 µg/L (SD:±2.07 µg/L) was determined for study participants (min/max: <0.045 µg /L (LOD)/2.36 µg/L). Several variables including low educational attainment (Relative Ratio (RR) (adjusted)=1.50; 95% CI 1.17–1.91), milk consumption (RR (adjusted)=0.86; 95% CI 0.76–0.97), and use of zinc supplements (RR (adjusted)=0.76; 95% CI 0.64–0.95) were observed to be significantly associated with blood Cd concentrations in the adjusted regression model. The variable domains socioeconomic status (R 2 adj =0.11) and country of origin (R 2 adj =0.236) were the strongest predictors of blood Cd. Conclusion: Blood Cd

Blood cadmium concentrations and environmental exposure sources in newcomer South and East Asian women in the Greater Toronto Area, Canada

Energy Technology Data Exchange (ETDEWEB)

Wiseman, C.L.S., E-mail: clare.wiseman@utoronto.ca [School of the Environment, University of Toronto (Canada); Dalla Lana School of Public Health, University of Toronto (Canada); Parnia, A.; Chakravartty, D. [Dalla Lana School of Public Health, University of Toronto (Canada); Archbold, J. [Toronto Public Health (Canada); Zawar, N. [Dalla Lana School of Public Health, University of Toronto (Canada); Copes, R. [Dalla Lana School of Public Health, University of Toronto (Canada); Public Health Ontario (Canada); Cole, D.C. [School of the Environment, University of Toronto (Canada); Dalla Lana School of Public Health, University of Toronto (Canada)

2017-04-15

Background: Immigrant women are often identified as being particularly vulnerable to environmental exposures and health effects. The availability of biomonitoring data on newcomers is limited, thus, presenting a challenge to public health practitioners in the identification of priorities for intervention. Objectives: In fulfillment of data needs, the purpose of this study was to characterize blood concentrations of cadmium (Cd) among newcomer women of reproductive age (19–45 years of age) living in the Greater Toronto Area (GTA), Canada and to assess potential sources of environmental exposures. Methods: A community-based model, engaging peer researchers from the communities of interest, was used for recruitment and follow-up purposes. Blood samples were taken from a total of 211 newcomer women from South and East Asia, representing primary, regional origins of immigrants to the GTA, and environmental exposure sources were assessed via telephone survey. Metal concentrations were measured in blood samples (diluted with 0.5% (v/v) ammonium hydroxide and 0.1% (v/v) octylphenol ethoxylate) using a quadrupole ICP-MS. Survey questions addressed a wide range of environmental exposure sources, including dietary and smoking patterns and use of nutritional supplements, herbal products and cosmetics. Results: A geometric mean (GM) blood Cd concentration of 0.39 µg/L (SD:±2.07 µg/L) was determined for study participants (min/max: <0.045 µg /L (LOD)/2.36 µg/L). Several variables including low educational attainment (Relative Ratio (RR) (adjusted)=1.50; 95% CI 1.17–1.91), milk consumption (RR (adjusted)=0.86; 95% CI 0.76–0.97), and use of zinc supplements (RR (adjusted)=0.76; 95% CI 0.64–0.95) were observed to be significantly associated with blood Cd concentrations in the adjusted regression model. The variable domains socioeconomic status (R{sup 2}{sub adj}=0.11) and country of origin (R{sup 2}{sub adj}=0.236) were the strongest predictors of blood Cd. Conclusion

Urinary concentrations of environmental phenols in pregnant women in a pilot study of the National Children's Study

International Nuclear Information System (INIS)

Mortensen, Mary E.; Calafat, Antonia M.; Ye, Xiaoyun; Wong, Lee-Yang; Wright, David J.; Pirkle, James L.; Merrill, Lori S.; Moye, John

2014-01-01

Environmental phenols are a group of chemicals with widespread uses in consumer and personal care products, food and beverage processing, and in pesticides. We assessed exposure to benzophenone-3, bisphenol A (BPA), triclosan, methyl- and propyl parabens, and 2,4- and 2,5-dichlorophenol or their precursors in 506 pregnant women enrolled in the National Children's Study (NCS) Vanguard Study. We measured the urinary concentrations of the target phenols by using online solid-phase extraction–isotope dilution high performance liquid chromatography–tandem mass spectrometry. NCS women results were compared to those of 524 similar-aged women in the National Health and Nutrition Examination Survey (NHANES) 2009–2010, and to 174 pregnant women in NHANES 2005–2010. In the NCS women, we found significant racial/ethnic differences (p<0.05) in regression adjusted mean concentrations of benzophenone-3, triclosan, 2,4- and 2,5-dichlorophenol, but not of BPA. Urinary 2,4- and 2,5-dichlorophenol concentrations were highly correlated (r=0.66, p<0.0001). Except for BPA and triclosan, adjusted mean concentrations were significantly different across the 7 study sites. Education was marginally significant for benzophenone-3, triclosan, propyl paraben, and 2,5-dichlorophenol. Urinary concentrations of target phenols in NCS pregnant women and U.S. women and pregnant women were similar. In NCS pregnant women, race/ethnicity and geographic location determined urinary concentrations of most phenols (except BPA), suggesting differential exposures. NCS Main Study protocols should collect urine biospecimens and information about exposures to environmental phenols. - Highlights: • Limited biomonitoring data are available in pregnant women. • Seven urinary phenols were measured in 506 third trimester women enrolled in the NCS. • Urine benzophenone-3, triclosan, 2,4- and 2,5-dichlorophenol differed by race/ethnicity. • Urinary concentrations of 2,4- and 2,5-dichlorophenol were

Proposed Tenaska Washington II Generation Project : Final Environmental Impact Statement. Volume 2: Public Involvement.

Energy Technology Data Exchange (ETDEWEB)

United States. Bonneville Power Administration.

1994-01-01

In regard to the proposed Tenaska Washington II Generation Project, the goal of the Bonneville Power Administration`s (BPA) Environmental Impact Statement (EIS) public involvement process is to determine the issues to be examined and pertinent analyses to be conducted and to solicit comments on the content and quality of information presented in the Draft Environmental Impact Statement (DEIS). Comments and questions are solicited from the public and government agencies during the scoping process and during the comment period and public hearing on the DEIS, to find out what is of most concern to them. The end product of the public involvement process is the Comment Report which follows in part of this volume on Public Involvement.

Environmental impact of low concentrated wastes

International Nuclear Information System (INIS)

Barescut, J.C.

1998-01-01

A means to reduce the impact of a waste landfill is to limit its content so that after a reasonably short time, its radioactivity does not significantly exceed the natural level. For this means to be effective, it must be demonstrated that the system will not, in the long run, spontaneously evolve towards local sports of higher concentration. This process would require considerable converging migrations that would offer many opportunities for mixing and thus be inconsistent with concentration. Moreover, concentration is an energy-demanding process that will be limited by the availability of energy, especially in chemical form. For these reasons, it is wise to avoid placing a landfill where energy is likely to be more readily available than on the average. It is also advisable to avoid artificial protections, if their future evolution is not fully understood, since they necessarily contain an excess of energy relative to the undisturbed natural state. (author)

Techno-economic evaluation of concentrating solar power generation in India

International Nuclear Information System (INIS)

Purohit, Ishan; Purohit, Pallav

2010-01-01

The Jawaharlal Nehru National Solar Mission (JNNSM) of the recently announced National Action Plan on Climate Change (NAPCC) by the Government of India aims to promote the development and use of solar energy for power generation and other uses with the ultimate objective of making solar competitive with fossil-based energy options. The plan includes specific goals to (a) create an enabling policy framework for the deployment of 20,000 MW of solar power by 2022; (b) create favourable conditions for solar manufacturing capability, particularly solar thermal for indigenous production and market leadership; (c) promote programmes for off grid applications, reaching 1000 MW by 2017 and 2000 MW by 2022, (d) achieve 15 million m 2 solar thermal collector area by 2017 and 20 million by 2022, and (e) deploy 20 million solar lighting systems for rural areas by 2022. The installed capacity of grid interactive solar power projects were 6 MW until October 2009 that is far below from their respective potential. In this study, a preliminary attempt towards the technical and economic assessment of concentrating solar power (CSP) technologies in India has been made. To analyze the techno-economic feasibility of CSP technologies in Indian conditions two projects namely PS-10 (based on power tower technology) and ANDASOL-1 (based on parabolic trough collector technology) have been taken as reference cases for this study. These two systems have been simulated at several Indian locations. The preliminary results indicate that the use of CSP technologies in India make financial sense for the north-western part of the country (particularly in Rajasthan and Gujarat states). Moreover, internalization of secondary benefits of carbon trading under clean development mechanism of the Kyoto Protocol further improves the financial feasibility of CSP systems at other locations considered in this study. It may be noted that the locations blessed with annual direct solar radiation more than 1800 k

Enrofloxacin at environmentally relevant concentrations enhances uptake and toxicity of cadmium in the earthworm Eisenia fetida in farm soils

Energy Technology Data Exchange (ETDEWEB)

Li, Yinsheng, E-mail: yinshengli@sjtu.edu.cn [School of Agriculture and Biology, Shanghai Jiao Tong University, Shanghai 200240 (China); Tang, Hao; Hu, Yingxiu; Wang, Xiuhong; Ai, Xiaojie; Tang, Li [School of Agriculture and Biology, Shanghai Jiao Tong University, Shanghai 200240 (China); Matthew, Cory [Institute of Agriculture & Environment, Massey University, Private Bag 11-222, Palmerston North 4442 (New Zealand); Cavanagh, Jo [Landcare Research, PO Box 40, Lincoln 7640 (New Zealand); Qiu, Jiangping [School of Agriculture and Biology, Shanghai Jiao Tong University, Shanghai 200240 (China)

2016-05-05

Highlights: • Enrofloxacin (EF) and cadmium (Cd) were independently adsorbed in soils. • EF accelerated and increased Cd bioaccumulation in earthworms. • At high concentration EF (10 mg kg{sup −1}) was toxic to earthworms. • EF enhanced Cd induced oxidative stress, and increased burrowing and respiration. • EF did not affect the Cd induced increase in metallothionein in earthworms. - Abstract: Individual and combined effects of enrofloxacin (EF) and cadmium (Cd) on the earthworm Eisenia fetida at environmentally relevant concentrations were investigated. EF is a veterinary antibiotic; Cd is an impurity in phosphatic fertiliser. For both, residues may accumulate in farm soils. In laboratory tests, over 98% of spiked EF was adsorbed by farm soils, with a half-life >8 weeks. However, earthworms absorbed less than 20% of spiked EF. Earthworms in soil with EF concentration 10 mg kg{sup −1} soil experienced transient oxidative stress and exhibited reduced burrowing activity and respiration after an 8-week exposure; EF at 0.1 and 1.0 mg kg{sup −1} soil did not elicit toxicity symptoms. When both were added, Cd did not affect EF uptake, but each increment of spiked EF increased Cd bioaccumulation and associated oxidative stress of earthworms, and also caused decreased burrow length and CO{sub 2} production. However, metallothionein induction was not affected. The enhanced toxicity of Cd to earthworms in the presence of EF at low environmental concentrations may have implications for the health and reproductive success of earthworm populations and highlights the importance of understanding effects of antibiotic contamination of farm soils, and of awareness of environmental effects from interaction between multiple contaminants.

Enrofloxacin at environmentally relevant concentrations enhances uptake and toxicity of cadmium in the earthworm Eisenia fetida in farm soils

International Nuclear Information System (INIS)

Li, Yinsheng; Tang, Hao; Hu, Yingxiu; Wang, Xiuhong; Ai, Xiaojie; Tang, Li; Matthew, Cory; Cavanagh, Jo; Qiu, Jiangping

2016-01-01

Highlights: • Enrofloxacin (EF) and cadmium (Cd) were independently adsorbed in soils. • EF accelerated and increased Cd bioaccumulation in earthworms. • At high concentration EF (10 mg kg"−"1) was toxic to earthworms. • EF enhanced Cd induced oxidative stress, and increased burrowing and respiration. • EF did not affect the Cd induced increase in metallothionein in earthworms. - Abstract: Individual and combined effects of enrofloxacin (EF) and cadmium (Cd) on the earthworm Eisenia fetida at environmentally relevant concentrations were investigated. EF is a veterinary antibiotic; Cd is an impurity in phosphatic fertiliser. For both, residues may accumulate in farm soils. In laboratory tests, over 98% of spiked EF was adsorbed by farm soils, with a half-life >8 weeks. However, earthworms absorbed less than 20% of spiked EF. Earthworms in soil with EF concentration 10 mg kg"−"1 soil experienced transient oxidative stress and exhibited reduced burrowing activity and respiration after an 8-week exposure; EF at 0.1 and 1.0 mg kg"−"1 soil did not elicit toxicity symptoms. When both were added, Cd did not affect EF uptake, but each increment of spiked EF increased Cd bioaccumulation and associated oxidative stress of earthworms, and also caused decreased burrow length and CO_2 production. However, metallothionein induction was not affected. The enhanced toxicity of Cd to earthworms in the presence of EF at low environmental concentrations may have implications for the health and reproductive success of earthworm populations and highlights the importance of understanding effects of antibiotic contamination of farm soils, and of awareness of environmental effects from interaction between multiple contaminants.

Regional variations in the health, environmental, and climate benefits of wind and solar generation

Science.gov (United States)

Siler-Evans, Kyle; Azevedo, Inês Lima; Morgan, M. Granger; Apt, Jay

2013-01-01

When wind or solar energy displace conventional generation, the reduction in emissions varies dramatically across the United States. Although the Southwest has the greatest solar resource, a solar panel in New Jersey displaces significantly more sulfur dioxide, nitrogen oxides, and particulate matter than a panel in Arizona, resulting in 15 times more health and environmental benefits. A wind turbine in West Virginia displaces twice as much carbon dioxide as the same turbine in California. Depending on location, we estimate that the combined health, environmental, and climate benefits from wind or solar range from $10/MWh to $100/MWh, and the sites with the highest energy output do not yield the greatest social benefits in many cases. We estimate that the social benefits from existing wind farms are roughly 60% higher than the cost of the Production Tax Credit, an important federal subsidy for wind energy. However, that same investment could achieve greater health, environmental, and climate benefits if it were differentiated by region. PMID:23798431

Regional variations in the health, environmental, and climate benefits of wind and solar generation.

Science.gov (United States)

Siler-Evans, Kyle; Azevedo, Inês Lima; Morgan, M Granger; Apt, Jay

2013-07-16

When wind or solar energy displace conventional generation, the reduction in emissions varies dramatically across the United States. Although the Southwest has the greatest solar resource, a solar panel in New Jersey displaces significantly more sulfur dioxide, nitrogen oxides, and particulate matter than a panel in Arizona, resulting in 15 times more health and environmental benefits. A wind turbine in West Virginia displaces twice as much carbon dioxide as the same turbine in California. Depending on location, we estimate that the combined health, environmental, and climate benefits from wind or solar range from $10/MWh to $100/MWh, and the sites with the highest energy output do not yield the greatest social benefits in many cases. We estimate that the social benefits from existing wind farms are roughly 60% higher than the cost of the Production Tax Credit, an important federal subsidy for wind energy. However, that same investment could achieve greater health, environmental, and climate benefits if it were differentiated by region.

Safety and Environmental Protection Division 1975 environmental monitoring report

International Nuclear Information System (INIS)

Hull, A.P.; Ash, J.A.

1976-04-01

The environmental levels of radioactivity and other environmental pollutants found in the vicinity of Brookhaven National Laboratory during 1975 are summarized in this report. As an aid in the interpretation of the data, the amounts of radioactivity and other pollutants released in airborne and liquid effluents from Laboratory facilities to the environment are also indicated. The environmental data include external radiation levels; radioactive air particulates; tritium and iodine concentrations; the amounts and concentrations of radioactivity in precipitation; the amounts and concentrations of radioactivity in and the quality of the stream into which liquid effluents are released; the concentrations of radioactivity in sediments and biota from the stream; the concentrations of radioactivity in and the quality of ground waters underlying the Laboratory; and concentrations of radioactivity in milk, grass and soil samples obtained in the vicinity of the Laboratory

Geotechnical environmental aspects of geothermal power generation at Herber, Imperial Valley, California

Energy Technology Data Exchange (ETDEWEB)

1976-10-01

The feasibility of constructing a 25-50 MWe geothermal power plant using low salinity hydrothermal fluid as the energy source was assessed. Here, the geotechnical aspects of geothermal power generation and their relationship to environmental impacts in the Imperial Valley of California were investigated. Geology, geophysics, hydrogeology, seismicity and subsidence are discussed in terms of the availability of data, state-of-the-art analytical techniques, historical and technical background and interpretation of current data. Estimates of the impact of these geotechnical factors on the environment in the Imperial Valley, if geothermal development proceeds, are discussed.

Modeling and performance analysis of a concentrated photovoltaic–thermoelectric hybrid power generation system

International Nuclear Information System (INIS)

Lamba, Ravita; Kaushik, S.C.

2016-01-01

Highlights: • Thermodynamic model of concentrated photovoltaic–thermoelectric system is analysed. • Thomson effect reduces the power output of PV, TE and hybrid PV–TEG system. • Effect of thermocouple number, irradiance, PV and TE current have been studied. • The optimum concentration ratio for maximum power output has been found out. • The overall efficiency and power output of hybrid PV–TEG system has been improved. - Abstract: In this study, a thermodynamic model for analysing the performance of a concentrated photovoltaic–thermoelectric generator (CPV–TEG) hybrid system including Thomson effect in conjunction with Seebeck, Joule and Fourier heat conduction effects has been developed and simulated in MATALB environment. The expressions for calculating the temperature of photovoltaic (PV) module, hot and cold sides of thermoelectric (TE) module are derived analytically as well. The effect of concentration ratio, number of thermocouples in TE module, solar irradiance, PV module current and TE module current on power output and efficiency of the PV, TEG and hybrid PV–TEG system have been studied. The optimum concentration ratio corresponding to maximum power output of the hybrid system has been found out. It has been observed that by considering Thomson effect in TEG module, the power output of the PV, TE and hybrid PV–TEG systems decreases and at C = 1 and 5, it reduces the power output of hybrid system by 0.7% and 4.78% respectively. The results of this study may provide basis for performance optimization of a practical irreversible CPV–TEG hybrid system.

Non-Aqueous Titration Method for Determining Suppressor Concentration in the MCU Next Generation Solvent (NGS)

International Nuclear Information System (INIS)

Taylor-Pashow, Kathryn M. L.; Jones, Daniel H.

2017-01-01

A non-aqueous titration method has been used for quantifying the suppressor concentration in the MCU solvent hold tank (SHT) monthly samples since the Next Generation Solvent (NGS) was implemented in 2013. The titration method measures the concentration of the NGS suppressor (TiDG) as well as the residual tri-n-octylamine (TOA) that is a carryover from the previous solvent. As the TOA concentration has decreased over time, it has become difficult to resolve the TiDG equivalence point as the TOA equivalence point has moved closer. In recent samples, the TiDG equivalence point could not be resolved, and therefore, the TiDG concentration was determined by subtracting the TOA concentration as measured by semi-volatile organic analysis (SVOA) from the total base concentration as measured by titration. In order to improve the titration method so that the TiDG concentration can be measured directly, without the need for the SVOA data, a new method has been developed that involves spiking of the sample with additional TOA to further separate the two equivalence points in the titration. This method has been demonstrated on four recent SHT samples and comparison to results obtained using the SVOA TOA subtraction method shows good agreement. Therefore, it is recommended that the titration procedure be revised to include the TOA spike addition, and this to become the primary method for quantifying the TiDG.

Non-Aqueous Titration Method for Determining Suppressor Concentration in the MCU Next Generation Solvent (NGS)

Energy Technology Data Exchange (ETDEWEB)

Taylor-Pashow, Kathryn M. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Jones, Daniel H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2017-10-23

A non-aqueous titration method has been used for quantifying the suppressor concentration in the MCU solvent hold tank (SHT) monthly samples since the Next Generation Solvent (NGS) was implemented in 2013. The titration method measures the concentration of the NGS suppressor (TiDG) as well as the residual tri-n-octylamine (TOA) that is a carryover from the previous solvent. As the TOA concentration has decreased over time, it has become difficult to resolve the TiDG equivalence point as the TOA equivalence point has moved closer. In recent samples, the TiDG equivalence point could not be resolved, and therefore, the TiDG concentration was determined by subtracting the TOA concentration as measured by semi-volatile organic analysis (SVOA) from the total base concentration as measured by titration. In order to improve the titration method so that the TiDG concentration can be measured directly, without the need for the SVOA data, a new method has been developed that involves spiking of the sample with additional TOA to further separate the two equivalence points in the titration. This method has been demonstrated on four recent SHT samples and comparison to results obtained using the SVOA TOA subtraction method shows good agreement. Therefore, it is recommended that the titration procedure be revised to include the TOA spike addition, and this to become the primary method for quantifying the TiDG.

2015 Plan. Project 7: the environmental issue and the electrical sector. The options of electrical power supply and their socio-environmental implications: sources/conventional and non-conventional technologies of generation

International Nuclear Information System (INIS)

1992-10-01

The socio-environmental impacts caused by the uses of conventional sources (hydraulic, mineral coal, nuclear, petroleum by-products and natural gas) and non-conventional (biomass, solar, eolic, ocean and organic wastes) in electric power generation are presented. The main topics that integrate the environmental schedule in the last years are described, including some considerations about environmental legislation and atmospheric alterations. The reserves for each source are also cited. (C.G.C.)

A comparative study of health hazards and environmental impacts for electricity generation through nuclear energy hidroelectricity and coal fired thermoeletrical generation

International Nuclear Information System (INIS)

Guimaraes, C.A.

1982-01-01

Environmental impacts and health hazards were comparatively assessed in regard to electricity generation via nuclear energy, hidraulic dams and coal firing. The main aspects covered the nuclear reactor and its associated nuclear fuel cycle, coal fired thermoelectrical power plant its associated coal industry, and hidroelectrical power plant and its dam. Besides specific comparisons of impacts in the air, water, soil and health hazards an evaluation for the Brazilian case was made based on a forecast of electricity demand up to the year 2020. For the nuclear option the consequences were analysed based on American data since no data is yet available for Brazil. Coal firing option was also analised for based heavily on American data due to small Brazilian experience in this sector of energy generation. For hydroelectrical option Brazilian data were used mostly from CESP for comparative purposes. These alternatives for generation of electricity considered in this study are the most relevant for the next four decades for Brazil. (Author) [pt

Environmental impacts assessment of future electricity generating plants for the State of Minas Gerais, Brazil

International Nuclear Information System (INIS)

Pinheiro, Ricardo Brandt; Ribeiro, Leonardo Marcio Vilela; Loures, Marcelo de Melo Gomide

1999-01-01

The Energy and Power Evaluation Program was used for energy planning analysis of the entire energy system of the state of Minas Gerais, Brazil. The environmental impact and resource requirements were estimated with the IMPACTS module, using results obtained from the electricity generating system expansion plan generated by WASP, together with results of marketplace energy supply and demand balances over the study period (1995-2015) computed with the BALANCE module for five different scenarios. The results for the electricity generating system show that: the air emission levels increase in all scenarios: the growth rate of the economy and energy conservation are the most important factors affecting the emissions; the land use increase significantly, the new hydroelectric power plants contributing to almost the total of this increase. (author)

Environmental Benefits of Using Wind Generation to Power Plug-In Hybrid Electric Vehicles

Directory of Open Access Journals (Sweden)

Mahdi Hajian

2011-08-01

Full Text Available As alternatives to conventional vehicles, Plug-in Hybrid Electric Vehicles (PHEVs running off electricity stored in batteries could decrease oil consumption and reduce carbon emissions. By using electricity derived from clean energy sources, even greater environmental benefits are obtainable. This study examines the potential benefits arising from the widespread adoption of PHEVs in light of Alberta’s growing interest in wind power. It also investigates PHEVs’ capacity to mitigate natural fluctuations in wind power generation.

A Pilot Study on Comparative Assessment of Electricity Generating Systems Using Monetary Value

International Nuclear Information System (INIS)

Kim, Kil Yoo; Kim, Seong Ho; Kim, Tae Woon

2005-01-01

Recently, many variables which affect the cost of electricity generating systems are drastically changing. For examples, the price of crude oil soared above 70 dollars a barrel and it will be continuously going up. Kyoto Protocol, an international agreement signed by 141 countries that promise to reduce greenhouse gases, finally entered into force on February 16, 2005. A total of 39 countries are required to reduce their emissions of greenhouse gases, including carbon dioxide, methane and nitrous oxide, to 5.2 percent below the 1990 levels during 2008-2012. Also, many researches and government support are concentrated on the renewable energy. In Korea, the portion of renewable energy in the electricity generation will be increased up to 7% in 2010. Therefore, a comparative assessment among electricity generating systems by considering the environmental impacts, risks, health effects, and social effects is required to establish the national energy and power systems planning systematically and scientifically. Up to now, several papers for data collection and analysis of the environmental impacts, risks, and health effects for various electricity generation systems in Korea were published. However, they were not the comparative assessment covering all impacts and effects but just a partial assessment (e.g., environmental impacts assessment only), or not covering all generating systems such as nuclear, coal, LNG, hydro, oil, wind, photo-voltaic (=solar) but covering partial ones (e.g., nuclear, coal, LNG, and wind only). Although Ref. deals all electricity generating systems, and all impacts such as economic, environmental, health, and social impacts, it used too much subjective opinion by using pairwise comparison questionnaire to know the relative importance among the economic, environmental, health, and social effects. However, if economic, environmental, health, and social effects of the various electricity generation systems could be calculated by monetary value

Incorporating Environmental Justice into Second Generation Indices of Multiple Deprivation: Lessons from the UK and Progress Internationally

Directory of Open Access Journals (Sweden)

Jon Fairburn

2016-07-01

Full Text Available Second generation area-based indices of multiple deprivation have been extensively used in the UK over the last 15 years. They resulted from significant developments in political, technical, and conceptual spheres for deprivation data. We review the parallel development of environmental justice research and how and when environmental data was incorporated into these indices. We explain the transfer of these methods from the UK to Germany and assess the progress internationally in developing such indices. Finally, we illustrate how billions of pounds in the UK was allocated by using these tools to tackle neighbourhood deprivation and environmental justice to address the determinants of health.

Guidelines for comparative assessment of the environmental impacts of wastes from electricity generation systems. A framework for the assessment and comparison of environmental impacts

International Nuclear Information System (INIS)

1995-02-01

The report describes the initial phase of a project intended to provide guidance to those concerned with environmental aspects of solid and hazardous waste management in electrical energy production systems. The focus is on describing a methodology for assessing and comparing the environmental impact arising from these wastes, and thereby to provide an input to overall electrical generation comparison projects, such as DECADES. The structure of the report is as follows: after considering a range of electrical energy production systems with an outline discussion of the waste streams produced in each case, the relevant treatment technologies and disposal options are reviewed. Then the elements of the framework for comparative assessment proposed in this report are described. The types of environmental impact, environmental protection criteria and indicators or end-points to measure the impact, the way in which such impacts can be quantitatively assessed and compared are discussed. 59 refs, figs and tabs

Characterizing the environmental impact of metals in construction and demolition waste.

Science.gov (United States)

Yu, Danfeng; Duan, Huabo; Song, Qingbin; Li, Xiaoyue; Zhang, Hao; Zhang, Hui; Liu, Yicheng; Shen, Weijun; Wang, Jinben

2018-05-01

Large quantities of construction and demolition (C&D) waste are generated in China every year, but their potential environmental impacts on the surrounding areas are rarely assessed. This study focuses on metals contained in C&D waste, characterizing the metal concentrations and their related environmental risks. C&D waste samples were collected in Shenzhen City, China, from building demolition sites, renovation areas undergoing refurbishment, landfill sites, and recycling companies (all located in Shenzhen city) that produce recycled aggregate, in order to identify pollution levels of the metals As, Cd, Cr, Cu, Pb, Ni, and Zn. The results showed that (1) the metal concentrations in most demolition and renovation waste samples were below the soil environmental quality standard for agricultural purposes (SQ-Agr.) in China; (2) Cd, Cu, and Zn led to relatively higher environmental risks than other metals, especially for Zn (DM5 tile sample, 360 mg/kg; R4 tile sample, 281 mg/kg); (3) non-inert C&D waste such as wall insulation and foamed plastic had high concentrations of As and Cd, so that these materials required special attention for sound waste management; and (4) C&D waste collected from landfill sites had higher concentrations of Cd and Cu than did waste collected from demolition and refurbishment sites.

Assessment of health status of oysters (Crassostreagigas) exposed to environmentally relevant concentrations of Ag and Cu in brackish waters

Science.gov (United States)

Rementeria, Ane; Mikolaczyk, Mathilde; Peña, Ainhize; Lanceleur, Laurent; Blanc, Gérard; Soto, Manu; Schäfer, Jörg; Zaldibar, Beñat

2017-12-01

Human activities have altered estuarine environments leading to increased presence of different pollutants including metals. Although the implementation of new environmental policies has caused a considerable decrease in trace metal concentrations in estuaries around the Bay of Biscay, some elements such as copper (Cu) and silver (Ag) are still present in relatively high concentrations. Oysters have been widely used in environmental biomonitoring programs as sentinel organisms. Oysters Crassostrea gigas from an uncontaminated estuary were exposed to sublethal, environmentally relevant concentrations of Cu (2000 ng Cu/L) and Ag (500 ng Ag/L) during 14 days in brackish water (S = 18). A battery of cell and tissue level (exposure) biomarkers at different levels of biological complexity was applied and integrated into the Integrative Biological Response (IBR) index including: metallothionein contents, intralysosomal metal accumulation, digestive gland atrophy and digestive gland tissue integrity. Condition Index (CI) was incorporated into the IBR index as a complementary parameter that reflects the general physiological condition of oysters (organism level). Results indicated an increase in intralysosomal metal accumulation after 7 and 14 days of exposure to Ag together with an increase in the digestive epithelium atrophy and lipofuscin content after 7 days of exposure to Ag. The responses detected with the aid of biomarkers integrated in the IBR index showed higher toxicity in oysters exposed to Ag, inducing the clear onset of detoxification processes which also occurred, to a lower extent, in Cu-exposed oysters.

Environmental impact of nuclear industry and power generation in the Russian Federation: assessment of contribution to general damage

International Nuclear Information System (INIS)

Vetrov, V.

2002-01-01

The objective of the study was assess the contribution of nuclear industry and power generation to environmental pollution in the Russian Federation. The general aim is to provide rationale for the sound strategy and priorities in addressing issues related to technogenous environmental pollution at the national and regional governance levels. Estimates were derived from data found in reviews published by federal environmental protection authorities. The impact of major sectors of economy to contamination of the environment was estimated through analyzing the amount of chemical and radioactive releases, as well as parameters of air, water, soil and forest contamination for economic regions and provinces where major nuclear plants are located. Pollutant maximum permissible concentrations (MPC) for natural environment media (ambient air, natural water, soil) as adopted in RF were taken as evaluation criteria. A relative pollution index taking account of the gross product value in the given sector of economy was proposed for the purposes of economic assessment. According to reported data nuclear power and industry plants make no adverse effect on the ambient air quality in impact areas. Emissions of industrial gases and pollutants, and fossil-fuel combustion (dust and soot, NO 2 , CO etc.) remain the main sources of dangerous (exceeding MPC) chemical air pollution in each province concerned. The leading industries contributing a principal load to air pollution are: automobile transport, metallurgy, etc. Specific pollution indexes were calculated for several major sectors: φ=P/(MPC)·M m 3 /Rb, where P is gross pollutant emission, g/year; MPC - as above, g/m 3 ; M is value of annual production, Rb/year. Values of φ for these sectors are given in table form. Water quality in most natural fresh water resources fails to meet the standards, the most widespread pollutants being represented by oil products, phenols, etc. Major sources of water pollution are: industrial

Environmental monitoring report for the Point Lepreau, New Brunswick nuclear generating station 1984

International Nuclear Information System (INIS)

Nelson, R.W.P.; Ellis, K.M.; Smith, J.N.

1986-07-01

The Point Lepreau Environmental Monitoring Program (PLEMP) has been established within the Department of Fisheries and Oceans to assess the environmental impact of radioactive, thermal, and chemical releases from the Point Lepreau, N.B. Nuclear Generating Station (NGS) located on the Bay of Fundy. This report contains the results for the second year of the operational phase of the monitoring program. Emphasis has been placed on those areas where effects from the NGS operation were expected to be observed. Further studies were carried out on the characterization of the thermal plume during several pre-arranged tritium releases. Attention was given to tritium levels at the outfall, in the atmosphere and in biological samples. An initial attempt was made to relate the distribution of tritium in the Point Lepreau area in various phases to local meteorological conditions. Radionuclide levels in lichen, including, for the first time, aerial lichen on a regular basis, an efficient accumulator of atmospheric particulates were monitored. In addition, radionuclide measurements were made on samples collected during the pre-operational phase from the major environmental reservoirs and these radioactivity levels were compared to previous measurements to assess the impact of the operation of the NGS. The purpose of this program is to provide government with a comprehensive scientific basis upon which to assess the environmental implications of the operation of nuclear reactors in coastal regions

Concentration of sup(99m)Tc from the eluate of 99Mo-sup(99m)Tc generators

International Nuclear Information System (INIS)

Saucedo, T.; Mora, M.; Fraga de Suarez, A.H.; Mitta, A.E.A.

1976-04-01

A method is described to concentrate sup(99m)Tc solutions, originated in 99 Mo-sup(99m)Tc generators, independent of its age. The techniques of preparation of the different radiopharmaceuticals used in nuclear medicine are also described. (author) [es

The calculation and estimation of wastes generated by decommissioning of nuclear facilities. Tokai works and Ningyo-toge Environmental Engineering Center

International Nuclear Information System (INIS)

Ayame, Y.; Tanabe, T.; Takahashi, K.; Takeda, S.

2001-07-01

This investigation was conducted as a part of planning the low-level radioactive waste management program (LLW management program). The aim of this investigation was contributed to compile the radioactive waste database of JNC's LLW management program. All nuclear facilities of the Tokai works and Ningyo-toge Environmental Engineering Center were investigated in this work. The wastes generated by the decommissioning of each nuclear facility were classified into radioactive waste and others (exempt waste and non-radioactive waste), and the amount of the wastes was estimated. The estimated amounts of radioactive wastes generated by decommissioning of the nuclear facilities are as follows. (1) Tokai works: The amount of waste generated by decommissioning of nuclear facilities of the Tokai works is about 1,079,100 ton. The amount of radioactive waste is about 15,400 ton. The amount of exempt waste and non-radioactive waste is about 1,063,700 ton. (2) Ningyo-toge Environmental Engineering Center: The amount of waste generated by decommissioning of nuclear facilities of Ningyo-toge Environmental Engineering Center is about 112,500 ton. The amount of radioactive waste is about 7,800 ton. The amount of exempt waste and non-radioactive waste is about 104,700 ton. (author)

Power Generation from Concentration Gradient by Reverse Electrodialysis in Dense Silica Membranes for Microfluidic and Nanofluidic Systems

Directory of Open Access Journals (Sweden)

Sang Woo Lee

2016-01-01

Full Text Available In this study, we investigate power generation by reverse electrodialysis in a dense silica membrane that is between two NaCl solutions with various combinations of concentrations. Each silica membrane is fabricated by depositing a silica layer on a porous alumina substrate via chemical vapor deposition. The measured potential-current (V-I characteristics of the silica membrane are used to obtain the transference number, diffusion potential, and electrical resistance. We develop empirical correlations for the transference number and the area-specific resistance, and present the results of power generation by reverse electrodialysis using the fabricated silica membranes. The highest measured power density is 0.98 mW/m2. In addition, we develop a contour map of the power density as a function of NaCl concentrations on the basis of the empirical correlations. The contour map shows that a power output density of 1.2 mW/m2 is achievable with the use of silica membranes and is sufficient to drive nanofluidic and microfluidic systems. The dense silica membrane has the potential for use in micro power generators in nanofluidic and microfluidic systems.

Environmental implications of electricity generation in an integrated long-term planning framework

International Nuclear Information System (INIS)

Turner, Graham M.; West, James

2012-01-01

Long-term, integrated modelling of electricity generation capacity and its operational requirements is important for coherent energy policy because of the multi-decadal lifespan of such plant, and because related fuel requirements, water consumption, and greenhouse gas emissions impact other sectors. This paper describes a physical model of electricity generation designed for long-term simulations, including the reproduction of decades of historical data, and its application to key policy questions. The simulation uses a dynamic, physical input–output model for the basic material and energy industries, embedded in an economy-wide stocks and flows framework (SFF). The historical reproduction, illustrated for the state of Victoria, is based on integrating bottom-up technical data on physical processes as inputs, and validating output against top-down aggregate data. We show that while greenhouse gas emissions would decrease significantly with the aggressive introduction of cleaner generation technology, long-term reductions are difficult to maintain against ongoing growth in consumption. Additionally, our sensitivity analysis identifies the importance of rapid action due to the age structure of operating power stations. We also identify significant imposts of alternative power generation on land and water resources, though a business-as-usual scenario would impose greater losses of water resources. - Highlights: ► System-wide dynamic analysis is needed to avoid unintended adverse environmental outcomes. ► Dynamics of long-lived plant is important in transitions for reducing greenhouse gas emissions. ► Large gains in GHG emissions efficiency of generation portfolios fail to maintain low emissions.

Miniaturized Antimicrobial Susceptibility Test by Combining Concentration Gradient Generation and Rapid Cell Culturing

Directory of Open Access Journals (Sweden)

Samuel C. Kim

2015-10-01

Full Text Available Effective treatment of bacterial infection relies on timely diagnosis and proper prescription of antibiotic drugs. The antimicrobial susceptibility test (AST is one of the most crucial experimental procedures, providing the baseline information for choosing effective antibiotic agents and their dosages. Conventional methods, however, require long incubation times or significant instrumentation costs to obtain test results. We propose a lab-on-a-chip approach to perform AST in a simple, economic, and rapid manner. Our assay platform miniaturizes the standard broth microdilution method on a microfluidic device (20 × 20 mm that generates an antibiotic concentration gradient and delivers antibiotic-containing culture media to eight 30-nL chambers for cell culture. When tested with 20 μL samples of a model bacterial strain (E. coli ATCC 25922 treated with ampicillin or streptomycin, our method allows for the determination of minimum inhibitory concentrations consistent with the microdilution test in three hours, which is almost a factor of ten more rapid than the standard method.

Full environmental life cycle cost analysis of concentrating solar power technology: contribution of externalities to overall energy costs

NARCIS (Netherlands)

Corona, B.; Cerrajero, E.; San Miguel, G.

2016-01-01

The aim of this work is to investigate the use of Full Environmental Life Cycle Costing (FeLCC) methodology to evaluate the economic performance of a 50 MW parabolic trough Concentrated Solar Power (CSP) plant operating in hybrid mode with different natural gas inputs (between 0% and 30%). The

Environmental impact assessment methods of the radiation generated by the runing medical linear accelerator

International Nuclear Information System (INIS)

Yin haihua; Yao Zhigang

2014-01-01

This article describes the environmental impact assessment methods of the radiation generated by the runing. medical linear accelerator. The material and thickness of shielding wall and protective doors of the linear accelerator were already knew, therefore we can evaluate the radiation by the runing. medical linear accelerator whether or not in the normal range of national standard by calculating the annual effective radiation dose of the surrounding personnel suffered. (authors)

NOAA JPSS Visible Infrared Imaging Radiometer Suite (VIIRS) Ice Concentration and Ice Surface Temperature Environmental Data Records (EDRs) from NDE

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains a high quality operational Environmental Data Record (EDR) of Sea Ice Concentration (SIC) and Ice Surface Temperature (IST) from the Visible...

Smokes and obscurants: A health and environmental effects data base assessment: A first-order, environmental screening and ranking of Army smokes and obscurants: Phase 1 report

Energy Technology Data Exchange (ETDEWEB)

Shinn, J.H.; Martins, S.A.; Cederwall, P.L.; Gratt, L.B.

1985-03-01

An initial environmental screening and ranking is provided for each Army smoke and obscurant (S and O) depending on smoke type and smoke-generating device. This was done according to the magnitude of the impact area, the characteristic environmental concentration, the relative inhalation toxicity, the relative toxicity when ingested by animals, the aquatic toxicity, the environmental mobility when freshly deposited, and the ultimate mobility and fate in the environment. The major smoke types considered were various forms of white phosphorus (WP), red phosphorus (RP), hexachloroethane-derived smokes (HC), fog oil (SGF-2), diesel fuel smokes (DF), and some infrared obscuring agents (IR).

Ecotoxicity of bisphenol A to Caenorhabditis elegans by multigenerational exposure and variations of stress response in vivo across generations

International Nuclear Information System (INIS)

Zhou, Dong; Yang, Jie; Li, Hui; Lu, Qiang; Liu, Yong-di; Lin, Kuang-fei

2016-01-01

In order to understand how bisphenol A (BPA) exposure acts on the evolutionary dynamics of populations and changes of stress response across generations, the model animal Caenorhabditis elegans was used to conduct the multigenerational testing. Multiple endpoints at the physiological (growth, reproduction, and locomotion behaviors) and molecular (stress-related gene expressions) levels were examined by multigenerational exposure to low-concentration BPA (0.001–10 μM) across four generations. The results showed that changes of physiological-level effects across four generations varied in magnitude and direction, depending on the exposure concentrations. C. elegans individuals in the first generation grew smaller, moved slower, and produced less offsprings than the controls by BPA exposure. As for each trait tested, the first generation response could be commonly mirrored in the subsequent generations at the highest concentration of 10 μM. However, at lower concentrations, response of parental generation was a relatively poor predictor of the effects on progeny, as acclimation or cumulative damage could occur in the subsequent generations. The integrated gene expression profiles visually illustrated that the tested gene expressions at low concentrations (0.001–0.01 μM) were more obviously changed in both G_1 and G_4 generations, and the G_1 generation showed a much greater degree of increase in stress-related gene expressions than the G_4 generation. The multigenerational toxicity data emphasize the need of considering biological effects over multiple generations to conduct accurate assessment of environmental risks of toxicants on population dynamics. - Highlights: • Multigenerational exposure was conducted to evaluate effects of BPA on C. elegans. • Changes of biological effects varied in magnitude and direction across generations. • A more significant induction in stress-related gene expressions was found in G_1. • Multigenerational tests have

Perspective on energy security and other non environmental externalities in electricity generation

International Nuclear Information System (INIS)

Bohi, D.R.

1994-01-01

Applications of the term externality to non environmental matters are often controversial and ambiguous. This paper argues that these externalities are also rarer or less important than sometimes alleged. The paper examines various potential energy security externalities and concludes that none of them are relevant to decisions regarding electric generation. Externalities may exist with regard to effects on local employment and the local infrastructure, although their importance is location specific and their measurement is highly subjective. In short, the consideration of this subset of externalities may confuse policy makers more than it helps them. (author). 15 refs

Many ways to be small: different environmental regulators of size generate distinct scaling relationships in Drosophila melanogaster

OpenAIRE

Shingleton, Alexander W.; Estep, Chad M.; Driscoll, Michael V.; Dworkin, Ian

2009-01-01

Static allometries, the scaling relationship between body and trait size, describe the shape of animals in a population or species, and are generated in response to variation in genetic or environmental regulators of size. In principle, allometries may vary with the different size regulators that generate them, which can be problematic since allometric differences are also used to infer patterns of selection on morphology. We test this hypothesis by examining the patterns of scaling in Drosop...

Environmental Factors Correlated with Culturable Enterococci Concentrations in Tropical Recreational Waters: A Case Study in Escambron Beach, San Juan, Puerto Rico

Directory of Open Access Journals (Sweden)

Abdiel E. Laureano-Rosario

2017-12-01

Full Text Available Enterococci concentration variability at Escambron Beach, San Juan, Puerto Rico, was examined in the context of environmental conditions observed during 2005–2015. Satellite-derived sea surface temperature (SST, turbidity, direct normal irradiance, and dew point were combined with local precipitation, winds, and mean sea level (MSL observations in a stepwise multiple regression analyses (Akaike Information Criteria model selection. Precipitation, MSL, irradiance, SST, and turbidity explained 20% of the variation in observed enterococci concentrations based upon these analyses. Changes in these parameters preceded increases in enterococci concentrations by 24 h up to 11 days, particularly during positive anomalies of turbidity, SST, and 480–960 mm of accumulated (4 days precipitation, which relates to bacterial ecology. Weaker, yet still significant, increases in enterococci concentrations were also observed during positive dew point anomalies. Enterococci concentrations decreased with elevated irradiance and MSL anomalies. Unsafe enterococci concentrations per US EPA recreational water quality guidelines occurred when 4-day cumulative precipitation ranged 481–960 mm; irradiance < 667 W·m−2; daily average turbidity anomaly >0.005 sr−1; SST anomaly >0.8 °C; and 3-day average MSL anomaly <−18.8 cm. This case study shows that satellite-derived environmental data can be used to inform future water quality studies and protect human health.

A unified model for energy and environmental performance assessment of natural gas-fueled poly-generation systems

International Nuclear Information System (INIS)

Chicco, Gianfranco; Mancarella, Pierluigi

2008-01-01

Poly-generation systems for combined production of manifold energy vectors such as electricity, heat at different enthalpy levels (for instance, in the form of hot water and steam), and cooling power from a unique source of primary energy (typically natural gas) are increasingly spreading, above all on a small-scale basis (below 1 MW e ), owing to their enhanced energy, environmental and economic characteristics. Availability of suitable tools for assessing the performance of such systems is therefore fundamental. In this paper, a unified general model is proposed for assessing the energy and CO 2 emission performance of any type of poly-generation system with natural gas as the energy input. In particular, the classical energy saving model for cogeneration systems is extended to include in the analysis further energy vectors by defining the novel PPES (Poly-generation Primary Energy Saving) indicator. In addition, equivalent efficiencies for CO 2 emission assessment are defined and used in the formulation of the new PCO2ER (Poly-generation CO 2 Emission Reduction) indicator, specifically introduced for environmental analysis. The formal analogy between the PPES and the PCO2ER indicators is highlighted. Numerical applications are provided to show the effectiveness of the proposed models and to quantify the typical benefits that poly-generation systems can bring. In particular, the new indicators are of relevant interest for both energy planners and policy makers, above all in the outlook of formulating financial incentive strategies, as it already occurs for cogeneration systems, or of participating to specific energy-related markets such as the ones for trading white certificates or emission allowances

Extraction of fullerenes from environmental matrices as affected by solvent characteristics and analyte concentration.

Science.gov (United States)

Place, Benjamin J; Kleber, Markus; Field, Jennifer A

2013-03-01

Fullerenes possess unique chemical properties that make the isolation of these compounds from heterogeneous environmental matrices difficult. For example, previous reports indicate that toluene-based extraction techniques vary in their ability to extract C60, especially from highly carbonaceous solid matrices. Here, we examined the effects of (i) solvent type (toluene alone versus an 80:20 v/v mixture of toluene and 1-methylnaphthalene) and (ii) analyte concentration on the extraction efficiency of an isotopically labeled surrogate compound, (13)C60. The toluene/1-methylnaphthalene mixture increased fullerene extraction efficiency from carbon lampblack by a factor of five, but was not significantly different from 100% toluene when applied to wood stove soot or montmorillonite. Recovery of the (13)C60 surrogate declined with decreasing analyte concentration. The usefulness of isotopically labeled surrogate is demonstrated and the study provides a quantitative assessment regarding the dependence of fullerene extraction efficiencies on the geochemical characteristics of solid matrices. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

1985 environmental monitoring report

Energy Technology Data Exchange (ETDEWEB)

Day, L.E.; Miltenberger, R.P.; Naidu, J.R. (eds.)

1986-04-01

The environmental monitoring program is designed to determine that BNL facilities operate such that the applicable environmental standards and effluent control requirements have been met. The data were evaluated using the appropriate environmental regulatory criteria. The environmental levels of radioactivity and other pollutants found in the vicinity of BNL during 1985 are summarized in this report. Detailed data are not included in the main body of the report, but are tabulated and presented in Appendix D. The environmental data include external radiation levels; radioactive air particulates; tritium concentrations; the amounts and concentrations of radioactivity in and the water quality of the stream into which liquid effluents are released; the water quality of the potable supply wells; the concentrations of radioactivity in biota from the stream; the concentrations of radioactivity in and the water quality of ground waters underlying the Laboratoy; concentrations of radioactivity in milk samples obtained in the vicinity of the Laboratory; and the 1984 strontium-90 data which was not available for inclusion in the 1984 Environmental Monitoring Report. In 1985, the results of the surveillance program demonstraed that the Laboratory has operated within the applicable environmental standards.

Estimation of Uncertainty in Aerosol Concentration Measured by Aerosol Sampling System

Energy Technology Data Exchange (ETDEWEB)

Lee, Jong Chan; Song, Yong Jae; Jung, Woo Young; Lee, Hyun Chul; Kim, Gyu Tae; Lee, Doo Yong [FNC Technology Co., Yongin (Korea, Republic of)

2016-10-15

FNC Technology Co., Ltd has been developed test facilities for the aerosol generation, mixing, sampling and measurement under high pressure and high temperature conditions. The aerosol generation system is connected to the aerosol mixing system which injects SiO{sub 2}/ethanol mixture. In the sampling system, glass fiber membrane filter has been used to measure average mass concentration. Based on the experimental results using main carrier gas of steam and air mixture, the uncertainty estimation of the sampled aerosol concentration was performed by applying Gaussian error propagation law. FNC Technology Co., Ltd. has been developed the experimental facilities for the aerosol measurement under high pressure and high temperature. The purpose of the tests is to develop commercial test module for aerosol generation, mixing and sampling system applicable to environmental industry and safety related system in nuclear power plant. For the uncertainty calculation of aerosol concentration, the value of the sampled aerosol concentration is not measured directly, but must be calculated from other quantities. The uncertainty of the sampled aerosol concentration is a function of flow rates of air and steam, sampled mass, sampling time, condensed steam mass and its absolute errors. These variables propagate to the combination of variables in the function. Using operating parameters and its single errors from the aerosol test cases performed at FNC, the uncertainty of aerosol concentration evaluated by Gaussian error propagation law is less than 1%. The results of uncertainty estimation in the aerosol sampling system will be utilized for the system performance data.

Draft Environmental Statement related to the operation of Vogtle Electric Generating Plant, Units 1 and 2 (Docket Nos. 50-424 and 50-425)

International Nuclear Information System (INIS)

1984-10-01

This Draft Environmental Statement contains an assessment of the environmental impact associated with the operation of the Vogtle Electric Generating Plant, Units 1 and 2, pursuant to the National Environmental Policy Act of 1969 (NEPA) and Title 10 of the Code of Federal Regulations, part 51 (10 CFR 51), as amended, of the Nuclear Regulatory Commission regulations. This statement examines the environmental impacts, environmental consequences and mitigating actions, and environmental and economic benefits and costs associated with station operation

Analytical model of impurity concentration during steam generation in permeable porous structures

International Nuclear Information System (INIS)

Polonskii, V.S.; Orlov, A.V.

1993-01-01

A model is proposed to describe the mass transfer of impurities during steam generation on a surface covered by porous deposits of corrosion products. The model is based on replacement of the actual structure of the deposits by a system of cylindrical fluid and vapor channels in which the flow of vapor and a liquid film is described by the Navier-Stokes equations. The driving force in the process is assumed to be the difference in the Laplacian pressures due to surface tension on the front and back sides of elongated vapor bubbles. Calculations performed for the operating conditions of the drums of the steam generators of nuclear power plants with water-moderated water-cooled reactors show that the mass transfer rate is extremely low in the gaps in cold drums and that the concentration of aggressive impurities deep within these channels may reach two or more orders of magnitude-thus leading to rapid corrosion. Almost complete vaporization occurs in the capillary channels of hot drums with deposits, which probably precludes corrosion in the channel depths. However, corrosion damage remains a possibility at the entrance to the channels (on the side of the second loop)

Regional variations in the health, environmental, and climate benefits of wind and solar generation

OpenAIRE

Siler-Evans, Kyle; Azevedo, Inês Lima; Morgan, M. Granger; Apt, Jay

2013-01-01

When wind or solar energy displace conventional generation, the reduction in emissions varies dramatically across the United States. Although the Southwest has the greatest solar resource, a solar panel in New Jersey displaces significantly more sulfur dioxide, nitrogen oxides, and particulate matter than a panel in Arizona, resulting in 15 times more health and environmental benefits. A wind turbine in West Virginia displaces twice as much carbon dioxide as the same turbine in California. De...

Power generation choice in the presence of environmental externalities

Energy Technology Data Exchange (ETDEWEB)

Sundqvist, Thomas

2002-08-01

This dissertation consists of an introductory part and six self-contained papers, all related to the issue of power generation choice in the presence of environmental externalities. Paper 1 provides a critical survey of a large number of electricity externality studies carried out during the last decades, and discusses a number of conceptual, policy-related and, in some cases, unresolved questions in the economic valuation of electricity externalities. These include: (a) the definition of externalities; (b) the choices of scope, relevant parameter input assumptions, and methodology; (c) the role of 'green' consumer demand in replacing external cost assessments; and (d) the behavioral assumptions and ethical principles underlying external cost valuation. Paper 2 focuses on explaining the variability of results among the external cost studies carried out so far by providing an econometric analysis of a large sample of externality studies. Most importantly, the paper concludes that an important explanation for the reported disparities can be attributed to the overall methodological choice employed. Paper 3 explores some of the ethical limits of environmental valuation, and analyzes what the implications are of these limits for the social choice between different power sources. The main thesis of the paper is that the scope of electricity externalities where non-market valuation can be applied from an ethical point of view is likely to be narrower than commonly assumed. Papers 4 and 5 use the choice experiment method to estimate how the environmental impacts arising from hydroelectric production are perceived and valued by Swedish houseowning households and non-residential consumers. The basis of the choice exercise is taken in the criteria set up by the Swedish Society for Nature Conservation under which existing hydropower in Sweden can be labeled as 'green' electricity. Data are gathered using mail-out surveys to 1000 households and 845 private

MANAGEMENT OF SOLID WASTE GENERATED BY THE INTEGRATED STEELWORKS ACTIVITY AND SOLUTIONS TO REDUCE THE ENVIRONMENTAL IMPACT

Directory of Open Access Journals (Sweden)

Anişoara CIOCAN

2010-05-01

Full Text Available The development of steel industry is subject to solve major problems arising from industry-nature relationship, strictly targeted on pollution control and protection of natural resources and energy. In this paper we discussed about the management of solid waste generated by an integrated steelwork located near a major urban area and the adopted solutions for the reduction of environmental impact. There are summarized technical solutions that are currently applied and were proposed some solutions that can be applied in accordance with the environmental legislations. The new solutions are proposed for integrated management of solid wastes in accordance with: the exact quantification (quantitative, qualitative and the generation sources of emissions and solid wastes; controlled storage; minimization of the wastes and its harmfulness; transformation of the wastes into valuable by-products used directly by the company in a subsequent process, or by external down-stream user.

Power generation from refuse derived fuel

International Nuclear Information System (INIS)

Surroop, Dinesh; Mohee, Romeela

2010-01-01

Full text: The beginning of the third millennium has been characterized by a progressive increase in the demand for fossil fuels, which has caused a steep rise in oil price. At the same time, several environmental disasters have increased the sensitivity of world-wide public opinion towards the effect that environmental pollution has on human health and climate change. These conditions have fostered a renewed interest in renewable energy like solar energy, wind energy, biomass and solid wastes. In addition, the disposal of municipal solid waste (MSW) has become a critical and costly problem. The traditional landfill method requires large amounts of land and contaminates air, water and soil. The increase in socio-economic condition during the past ten years has also significantly increased the amount of solid waste generated. There are around 1200 tons of municipal solid waste (MSW) generated daily, of which the combustibles namely plastics, paper and textile waste represent 28%, and with the present generation rate, the landfill will be filled by 2012. The study was, therefore, initiated to assess the potential of power generation from refused derived fuels (RDF) from municipal solid waste (MSW) in order to reduce the dependency on fossil fuels. There are 336 tons which is equivalent to 12 tons/ h of RDF that can be generated daily from the MSW and this would generate 19.2 MW power. There will be 312 kg/ h of ash that would be generated and the NO x and SO 2 concentration were found to be 395.5 and 43.3 mg/ Nm 3 respectively. It was also found that the amount of non-biogenic CO 2 produced was 471 g/ kWhe. (author)

Cross-Cultural Investigation of Consumers’ Generations Attitudes Towards Purchase of Environmentally Friendly Products in Apparel Retail

Directory of Open Access Journals (Sweden)

Dabija Dan-Cristian

2017-12-01

Full Text Available Recent changes of the environment and in the society have altered consumers’ preferences and brought new concerns among local communities regarding environmental protection and organizations responsibility, the adoption of environmentally friendly strategies, as well as offering more sustainable products. Consumers tend to select retailers based on their focus on environmental friendly products and on various “green” strategies regarding waste disposal, package recycling, etc. This study aims to highlight Romanian and Slovak consumers’ attitudes towards purchasing of goods from retailers that strive a clear focus on environmental responsibility and environmental friendly practices in apparel, footwear and sportswear retail. By means of a quantitative research based on a questionnaire administered to consumers of international retail chains with operations in both countries, the authors highlight differences in their perceptions and attitudes for buying green apparel, footwear and sportswear. Whereas Millennials and Gen Xers consumers in Romania and Slovakia believe that international apparel, footwear and sportswear retailers are less concerned about environmentally responsible behavior and the need of selling green products, Baby Boomers are more sensitive to such aspects and carefully select retailers according to their green strategy. This research provides specific findings about attitudes of different consumers’ generations within two emerging European countries (Romania, Slovakia.

Comparison of neutron activation analysis techniques for the determination of uranium concentrations in geological and environmental materials

International Nuclear Information System (INIS)

Landsberger, S.; Kapsimalis, R.

2013-01-01

We have described the determination of uranium in environmental, geological, and agricultural specimens by three different non-destructive nuclear methods. The effectiveness, as defined as the lower limits of detection in this work, of quantifying trace levels of bulk uranium in geological samples was evaluated for several common NAA techniques. These techniques include short-lived and medium-lived neutron activation analysis using thermal and epithermal neutrons; these results were compared with an assessment of Compton suppressed gamma-ray counting. A careful evaluation of three major (n,γ) reactions with chlorine, manganese and sodium that could impede determining low levels of uranium due to high Compton continuums was done. The evaluation of Compton suppressed passive gamma counting revealed that uranium concentrations below 50 mg kg −1 were not adequate to achieve good counting statistics using the 234m Pa the second daughter product of 238 U. -- Highlights: ► Determination of uranium concentrations in geological, environmental, and agricultural specimens. ► Use of several NAA and passive counting methods. ► Identified several key interferences. ► Use of Compton suppression to minimize effects of interferences

Comparing concentrating solar and nuclear power as baseload providers using the example of South Africa

International Nuclear Information System (INIS)

Pfenninger, Stefan; Keirstead, James

2015-01-01

Despite the increasing importance of variable renewable power generation, baseload, that is stable and predictable power generators, remain the backbone of many countries’ power systems. We here compare CSP (concentrating solar power) and nuclear power as baseload electricity providers for the case of South Africa, which is adding significant new generation capacity, has an abundant solar resource, but also one existing and additional planned nuclear power plants. Both of these technologies are considered baseload-capable with sufficient available fuel (sunlight or fissible material) to provide large amounts of nearly emissions-free electricity. We find that under a range of technological learning assumptions, CSP compares favorably against nuclear on costs in the period to 2030, and has lower investment and environmental risks. The results suggest that while nuclear power may be an important low-emissions power technology in regions with little sun, in the case of South Africa, CSP could be capable of providing a stable baseload supply at lower cost than nuclear power, and may have other non-cost benefits. - Highlights: • We compare nuclear and CSP (concentrating solar power) as baseload generators. • CSP could be competitive with nuclear by 2030 on providing baseload. • CSP plants producing above baseload when possible are more competitive. • On environmental and investment risks, CSP compares favorably. • Both options may have a role in different parts of the world

Environmental policy performance revisited

DEFF Research Database (Denmark)

Daugbjerg, Carsten; Sønderskov, Kim Mannemar

2012-01-01

. On the basis of the typology, a hypothesis on their ability to expand green markets is generated and tested in a comparative analysis of the performance of organic food policies in Denmark, Sweden, the UK and the US, focusing on their impact on organic consumption. Our analysis demonstrates that cross......Studies of environmental policy performance tend to concentrate on the impact of particular policy institutions or of single policy instruments. However, environmental policies most often consist of a package of policy instruments. Further, these studies pay no or very little attention to policy...... instruments directed at the demand side of the market. Therefore this article develops a policy typology for government intervention aimed at creating green markets. The typology distinguishes between four types of policy based on the balance between the supply-side and demand-side policy instruments...

Environmental alterations in biofuel generating molecules in Zilla spinosa.

Science.gov (United States)

Khattab, Hemmat; El Marid, Zeinab

2017-03-01

Now days, production of fuels and petrochemicals from renewable lignocellulosic biomass is an indispensable issue to meet the growing energy demand. Meanwhile, the changes in the climate and soil topography influence the growth and development as well as canopy level of the lignocellulosic biomass. In this study, Zilla spinosa Turr (Zilla) plants with similar age and size were collected from three main sectors (upstream, midstream, and downstream) of Wadi Hagul during spring (April) and summer (July) seasons. Environmental stresses evoked reduction in the energy trapping pigments concomitant with increments in chlorophyll fluorescence in summer harvested plants particularly at downstream. Furthermore, the biofuels generating compounds including carbohydrate, lignin, and lipid making the plant biomasses are greatly affected by environmental conditions. Greater amount of lignin was estimated in summer harvested Z. spinosa shoots particularly at downstream. Moreover, the total oil content which is a promising source of biodiesel was considerably decreased during summer season particularly at downstream. The physical properties of the lipids major constituent fatty acid methyl esters determine the biofuel properties and contribute in the adaptation of plants against environmental stresses. Hence, the analysis of fatty acid profile showed significant modifications under combined drought and heat stress displayed in the summer season. The maximum increase in saturated fatty acid levels including tridecanoic acid (C13:0), pentadeanoic acid (C15:0), palmitic acid (C16:0), and stearic acid (C18:0) were estimated in spring harvested Z. spinosa aerial portions particularly at midstream. In spite of the reduction in the total oil content, a marked increase in the value of unsaturated to saturated fatty acids ratio and thereby the unsaturation index were achieved during the dry summer period. Henceforth, these seasonal and spatial variations in fatty acids profiles may

Indian Point Nuclear Generating Plant Unit No. 3 (Docket No. 50-286): Final environmental statement: Volume 2

International Nuclear Information System (INIS)

1975-02-01

This document contains nine appendices to Volume I, The Final Environmental Impact Statement for the Indian Point Nuclear Generating Plant Unit Number Three. Topics covered include thermal discharges to the Hudson River; supplemental information relating to biological models; radiation effects on aquatic biota; conditions, assumptions, and parameters used in calculating radioactive releases; meteorology for radiological dispersion calculations; life history information of important fish species in the Hudson River near Indian Point; additional information on cooling towers considered as alternatives; data and calculations for assessment of predicted electrical demand; and comments on draft environmental statement

Effect of aluminium concentration and boron dopant on environmental embrittlement in FeAl aluminides

International Nuclear Information System (INIS)

Liu, C.T.; George, E.P.

1991-01-01

This paper reports on the room-temperature tensile properties of FeAl aluminides determined as functions of aluminum concentration (35 to 43 at. % Al), test environment, and surface (oil) coating. The two lower aluminum alloys containing 35 and 36.5% Al are prone to severe environmental embrittlement, while the two higher aluminum alloys with 40 and 43% Al are much less sensitive to change in test environment and surface coating. The reason for the different behavior is that the grain boundaries are intrinsically weak in the higher aluminum alloys, and these weak boundaries dominate the low ductility and brittle fracture behavior of the 40 and 43% Al alloys. When boron is added to the 40% Al alloy as a grain-boundary strengthener, the environmental effect becomes prominent. In this case, the tensile ductility of the boron-doped alloy, just like that of the lower aluminum alloys, can be dramatically improved by control of test environment (e.g. dry oxygen vs air). Strong segregation of boron to the grain boundaries, with a segregation factor of 43, was revealed by Auger analyses

Dynamics of Total Microcystin LR Concentration in Three Subtropical Hydroelectric Generation Reservoirs in Uruguay, South America.

Science.gov (United States)

González-Piana, Mauricio; Fabián, Daniel; Piccardo, Andrea; Chalar, Guillermo

2017-10-01

This study analyzed the temporal dynamics of total microcystin LR concentrations between the years of 2012 and 2015 in the Bonete, Baygorria and Palmar hydroelectric generation reservoirs in the central region of the Negro River, Uruguay. The three reservoirs showed differents total microcystin LR concentration, with no significant differences among them. Over 20 sampling dates, the three reservoirs exhibited total microcystin LR concentrations on eight occasions that corresponded to a slight to moderate human health risk according to WHO guideline values for recreational waters. By determining the concentration of microcystin LR in cyanobacterial biomass, we identified cyanobacterial populations that occurred over time with varying degrees of toxin production (maximal 85.4 µg/mm 3 ). The microcystin LR concentration in Bonete was positively correlated with temperature (r = 0.587) and cyanobacterial biomass (r = 0.736), in Baygorria with cyanobacterial biomass (r = 0.521), and in Palmar with temperature (r = 0.500) and negatively correlated with ammonia (r = -0.492). Action is needed to reduce the presence of toxic cyanobacteria in these systems. A decrease in the use of agrochemicals and management changes in the reservoir basins could be successful long-term measures.

Energy Analysis and Environmental Impacts of Hybrid Giant Napier (Pennisetum Hydridum) Direct-fired Power Generation in South China

Science.gov (United States)

Liao, Yanfen; Fang, Hailin; Zhang, Hengjin; Yu, Zhaosheng; Liu, Zhichao; Ma, Xiaoqian

2017-05-01

To meet with the demand of energy conservation and emission reduction policies, the method of life cycle assessment (LCA) was used to assess the feasibility of Hybrid Giant Napier (HGN) direct-fired power generation in this study. The entire life cycle is consisted of five stages (cultivation and harvesting, transportation, drying and comminuting, direct-fired power generation, constructing and decommissioning of biomass power plant). Analytical results revealed that to generate 10000kWh electricity, 10.925 t of customized HGN fuel (moisture content: 30 wt%) and 6659.430 MJ of energy were required. The total environmental impact potential was 0.927 PET2010 (person equivalents, targeted, in 2010) and the global warming (GW), acidification (AC), and nutrient (NE) emissions were 339.235 kg CO2-eq, 22.033 kg SO2-eq, and 25.486 kg NOx-eq respectively. The effect of AC was the most serious among all calculated category impacts. The energy requirements and environmental impacts were found to be sensitive to single yield, average transport distance, cutting frequency, and moisture content. The results indicated that HGN direct-fired power generation accorded well with Chinese energy planning; in addition, HGN proved to be a promising contribution to reducing non-renewable energy consumption and had encouraging prospects as a renewable energy plant.

Environmental and public interface for Point Aconi generating station, Point Aconi, Nova Scotia

Energy Technology Data Exchange (ETDEWEB)

Toner, T P

1993-01-01

Nova Scotia Power's most recent generating station is a 165 MW coal-fired circulating fluidized bed (CFB) unit located at Point Aconi on the northern tip of Boularderie Island. This paper discusses the environmental and public interfaces associated with this project, particularly on the unique items and issues requiring delicate and/or innovative approaches for their successful completion. Specific issues discussed include clarification of the process, the turnkey arrangement, the community liaison committee, freshwater supply, air emissions and dealings with commercial growers, dealings with lobster fishermen, dealings with Native peoples, and the transmission line.

Environmental issues associated with the generation of electricity

International Nuclear Information System (INIS)

Wilkinson, A.J.

1994-01-01

The environmental impacts of energy are recognised as paramount in discussions concerning sustainable development. The environmental impacts that may arise at each stage of the life cycles relevant to the production of electricity from natural gas, coal, oil, nuclear and renewable energy sources are described. Emissions data are discussed for releases to the water, air and land environments. Methods and studies to assign economic costs to environmental impacts are highlighted. (au) (10 refs.)

Factors affecting {sup 210}Po and {sup 210}Pb activity concentrations in mussels and implications for environmental bio-monitoring programmes

Energy Technology Data Exchange (ETDEWEB)

Carvalho, Fernando P., E-mail: carvalho@itn.p [Nuclear and Technological Institute (ITN), Department of Radiological Protection and Nuclear Safety, E.N. 10, 2686-953 Sacavem (Portugal); Oliveira, Joao M.; Alberto, G. [Nuclear and Technological Institute (ITN), Department of Radiological Protection and Nuclear Safety, E.N. 10, 2686-953 Sacavem (Portugal)

2011-02-15

The activity of {sup 210}Po and {sup 210}Pb was determined in mussels of the same size (3.5-4.0 cm shell length) sampled monthly over a 17-month period at the Atlantic coast of Portugal. Average radionuclide concentration values in mussels were 759 {+-} 277 Bq kg{sup -1} for {sup 210}Po (range 460-1470 Bq kg{sup -1} dry weight), and 45 {+-} 19 Bq kg{sup -1} for {sup 210}Pb (range 23-96 Bq kg{sup -1} dry weight). Environmental parameters and mussel biometric parameters were monitored during the same period. Although there was no seasonal variation of radionuclide concentrations in sea water during the study period, the concentration of radionuclide activity in mussels varied seasonally displaying peaks of high concentrations in winter and low concentrations in summer. Analysis of radionuclide data in relation to the physiological Condition Index of mussels revealed that {sup 210}Po and {sup 210}Pb activities in the mussel (average activity per individual) remained nearly constant during the investigation period, while mussel body weight fluctuated due to fat storage/expenditure in the soft tissues. Similar variation of radionuclide concentrations was observed in mussels transplanted from the sea coast into the Tejo Estuary. However, under estuarine environmental conditions and with higher food availability throughout the year, transplanted mussel Condition Index was higher than in coastal mussels and average radionuclide concentrations were 210 {+-} 75 Bq kg{sup -1} (dry weight) for {sup 210}Po and 10 {+-} 4 Bq kg{sup -1} (dry weight) for {sup 210}Pb, therefore lower than in coastal mussels with similar shell length. It is concluded that the apparent seasonal fluctuation and inter-site difference of radionuclide concentrations were mostly caused by mussel body weight fluctuation and not by radionuclide body burden fluctuation. This interpretation can be extended to the apparent seasonal fluctuation in concentrations of lipophilic and lipophobic contaminants in

X-ray Absorption Spectroscopy Identifies Calcium-Uranyl-Carbonate Complexes at Environmental Concentrations

International Nuclear Information System (INIS)

Kelly, Shelly D.; Kemner, Kenneth M.; Brooks, Scott C.

2007-01-01

Current research on bioremediation of uranium-contaminated groundwater focuses on supplying indigenous metal-reducing bacteria with the appropriate metabolic requirements to induce microbiological reduction of soluble uranium(VI) to poorly soluble uranium(IV). Recent studies of uranium(VI) bioreduction in the presence of environmentally relevant levels of calcium revealed limited and slowed uranium(VI) reduction and the formation of a Ca-UO2-CO3 complex. However, the stoichiometry of the complex is poorly defined and may be complicated by the presence of a Na-UO2-CO3 complex. Such a complex might exist even at high calcium concentrations, as some UO2-CO3 complexes will still be present. The number of calcium and/or sodium atoms coordinated to a uranyl carbonate complex will determine the net charge of the complex. Such a change in aqueous speciation of uranium(VI) in calcareous groundwater may affect the fate and transport properties of uranium. In this paper, we present the results from X-ray absorption fine structure (XAFS) measurements of a series of solutions containing 50 lM uranium(VI) and 30 mM sodium bicarbonate, with various calcium concentrations of 0-5 mM. Use of the data series reduces the uncertainty in the number of calcium atoms bound to the UO2-CO3 complex to approximately 0.6 and enables spectroscopic identification of the Na-UO2-CO3 complex. At nearly neutral pH values, the numbers of sodium and calcium atoms bound to the uranyl triscarbonate species are found to depend on the calcium concentration, as predicted by speciation calculations

The determination of arsenic, selenium, antimony, and tin in complex environmental samples by hydride generation AAS

International Nuclear Information System (INIS)

Johnson, D.; Beach, C.

1990-01-01

Hydride generation techniques are used routinely for the determination of As, Se, Sb and Sn in water samples. Advantages include high sensitivity, simplicity, and relative freedom from interferences. Continuous-flow designs greatly reduce analysis time as well as improve precision and allow for automation. However the accurate analysis of more complex environmental samples such as industrial sludges, soil samples, river sediments, and fly ash remains difficult. Numerous contributing factors influence the accuracy of the hydride technique. Sample digestion methods and sample preparation procedures are of critical importance. The digestion must adequately solubilize the elements of interest without loss by volatilization. Sample preparation procedures that guarantee the proper analyte oxidation state and eliminate the nitric acid and inter-element interferences are needed. In this study, difficult environmental samples were analyzed for As, Se, Sb, and Sn by continuous flow hydride generation. Sample preparation methods were optimized to eliminate interferences. The results of spike recovery studies will be presented. Data from the analysis of the same samples by graphite furnace AAS will be presented for comparison of accuracy, precision, and analysis time

FY 1999 report on the results of the development of technology of the environmentally friendly next generation small incinerator; 1999 nendo kankyo taio jisedai kogata shokyakuro gijutsu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The development was proceeded with of a next generation small incinerator of low dioxin emission. Concretely, the technology to be developed is for a next generation small incinerator of low dioxin emission in which the exhaust gas treatment system enabling various kinds of heat utilization is connected to the small incinerator mixing the fixed bed two stage combustion technology of industrial waste use low dioxin oxygen concentration control system and the high performance industrial furnace heat storage combustion technology. The trial-manufactured small incinerator has characteristics as follows: The incinerator can complement the decrease in efficiency in the wide-area refuse collection. It can remarkably reduce the emission of environmental pollutants such as CO2. It contributes to reduction in CO2 emission and reduction in fossil fuel consumption amount by effective utilization of exhaust heat. The incinerator is lower in price than the existing one of low dioxin emission type. The subjects are verification of the overall effect of the lower dioxin emission, verification of effects of reduction in CO2 emission and reduction in fossil fuel consumption amount by heat utilization, and study of the spread/promotion system. The report contains items of the development of an environmentally friendly next generation small incinerator and the evaluation survey for the commercialization, and photos as supplementary data. (NEDO)

The external costs of electricity generation: a comparison of generation technologies

Energy Technology Data Exchange (ETDEWEB)

Ozdemiroglu, E [Economics for the Environment Consultancy, London (United Kingdom)

1995-12-01

Electricity generation, like any economic activity, leads to costs that can be grouped in two categories: (a) private or internal and (b) external. Private costs are those paid by the buyers and sellers of energy within the market system. The external costs, however, are not included in the market price mechanism as they accrue to third parties other than the buyer and the seller. External costs include environmental external costs and non-environmental external costs. There are two conditions for the existence of external costs: (a) market failure, or the inability of markets to account for the cost of environmental impacts of energy generation and the market structure and (b) government or policy failure, or the policies that cause private generators to pay either higher or lower costs than they would if these interventions did not exist. A third reason can be added for the existence of non-environmental externalities: energy security, or certain costs faced by society as a result of over-reliance on imported energy. Section A introduces the concept of external costs and benefits. Section B looks at the environmental externalities of energy generation. The procedure is to develop the methodology to estimate what are known as externality adders, i.e. a monetary value for the environmental costs and benefits associated with selected generation technologies, expressed in pence per kilowatt-hour. The result is an `adder` because, in principle, the sum can be added to the private cost of generating electricity to obtain a measure of the `full` or `social` cost. The selected generation technologies are conventional coal, wind power, small-scale hydro, energy crops, incineration of municipal solid waste and energy recovery from landfill. The data reported are based on the application of the technologies in Scotland, but the methodology can be applied anywhere. Section C takes a brief look at the non-environmental externalities including the general theory and evidence

The external costs of electricity generation: a comparison of generation technologies

International Nuclear Information System (INIS)

Ozdemiroglu, E.

1995-01-01

Electricity generation, like any economic activity, leads to costs that can be grouped in two categories: (a) private or internal and (b) external. Private costs are those paid by the buyers and sellers of energy within the market system. The external costs, however, are not included in the market price mechanism as they accrue to third parties other than the buyer and the seller. External costs include environmental external costs and non-environmental external costs. There are two conditions for the existence of external costs: (a) market failure, or the inability of markets to account for the cost of environmental impacts of energy generation and the market structure and (b) government or policy failure, or the policies that cause private generators to pay either higher or lower costs than they would if these interventions did not exist. A third reason can be added for the existence of non-environmental externalities: energy security, or certain costs faced by society as a result of over-reliance on imported energy. Section A introduces the concept of external costs and benefits. Section B looks at the environmental externalities of energy generation. The procedure is to develop the methodology to estimate what are known as externality adders, i.e. a monetary value for the environmental costs and benefits associated with selected generation technologies, expressed in pence per kilowatt-hour. The result is an 'adder' because, in principle, the sum can be added to the private cost of generating electricity to obtain a measure of the 'full' or 'social' cost. The selected generation technologies are conventional coal, wind power, small-scale hydro, energy crops, incineration of municipal solid waste and energy recovery from landfill. The data reported are based on the application of the technologies in Scotland, but the methodology can be applied anywhere. Section C takes a brief look at the non-environmental externalities including the general theory and evidence

Critical zone structure controls concentration-discharge relationships and solute generation in forested tropical montane watersheds

Science.gov (United States)

Wymore, Adam S.; Brereton, Richard L.; Ibarra, Daniel E.; Maher, Kate; McDowell, William H.

2017-07-01

Concentration-discharge (C-Q) relationships are poorly known for tropical watersheds, even though the tropics contribute a disproportionate amount of solutes to the global ocean. The Luquillo Mountains in Puerto Rico offer an ideal environment to examine C-Q relationships across a heterogeneous tropical landscape. We use 10-30 years of weekly stream chemistry data across 10 watersheds to examine C-Q relationships for weathering products (SiO2(aq), Ca2+, Mg2+, and Na+) and biologically controlled solutes (dissolved organic carbon [DOC], dissolved organic nitrogen [DON], NH4+, NO3-, PO43-, K+, and SO42-). We analyze C-Q relationships using power law equations and a solute production model and use principal component analysis to test hypotheses regarding how the structure of the critical zone controls solute generation. Volcaniclastic watersheds had higher concentrations of weathering solutes and smaller tributaries were approximately threefold more efficient at generating these solutes than larger rivers. Lithology and vegetation explained a significant amount of variation in the theoretical maximum concentrations of weathering solutes (r2 = 0.43-0.48) and in the C-Q relationships of PO43- (r2 = 0.63) and SiO2(aq) (r2 = 0.47). However, the direction and magnitude of these relationships varied. Across watersheds, various forms of N and P displayed variable C-Q relationships, while DOC was consistently enriched with increasing discharge. Results suggest that PO43- may be a useful indicator of watershed function. Relationships between C-Q and landscape characteristics indicate the extent to which the structure and function of the Critical zone controls watershed solute fluxes.

Thrust generation experiments on microwave rocket with a beam concentrator for long distance wireless power feeding

Science.gov (United States)

Fukunari, Masafumi; Yamaguchi, Toshikazu; Nakamura, Yusuke; Komurasaki, Kimiya; Oda, Yasuhisa; Kajiwara, Ken; Takahashi, Koji; Sakamoto, Keishi

2018-04-01

Experiments using a 1 MW-class gyrotron were conducted to examine a beamed energy propulsion rocket, a microwave rocket with a beam concentrator for long-distance wireless power feeding. The incident beam is transmitted from a beam transmission mirror system. The beam transmission mirror system expands the incident beam diameter to 240 mm to extend the Rayleigh length. The beam concentrator receives the beam and guides it into a 56-mm-diameter cylindrical thruster tube. Plasma ignition and ionization front propagation in the thruster were observed through an acrylic window using a fast-framing camera. Atmospheric air was used as a propellant. Thrust generation was achieved with the beam concentrator. The maximum thrust impulse was estimated as 71 mN s/pulse from a pressure history at the thrust wall at the input energy of 638 J/pulse. The corresponding momentum coupling coefficient, Cm was inferred as 204 N/MW.

Environmental isotope data no.1: World survey of isotope concentration in precipitation (1953-1963)

International Nuclear Information System (INIS)

1969-01-01

This volume reports environmental isotope (tritium, deuterium and oxygen-18) concentrations in monthly samples of precipitation taken by a global network of 155 stations in the period 1953-1963. Selected meteorological data (amount of precipitation, vapour pressure and temperature) are presented to aid the user in hydrological and hydrometerological studies. The collection of the precipitation samples is carried out by the meteorological services of 65 countries and territories. Analyses of the network samples are done in co-operating laboratories in Canada, Denmark, India, Israel, New Zealand, Sweden and the United States of America and in the IAEA laboratory in Vienna. 4 refs, 2 figs

Simple schemes for generation of W-type multipartite entangled states and realization of quantum-information concentration

International Nuclear Information System (INIS)

Deng-Yu, Zhang; Shi-Qing, Tang; Li-Jun, Xie; Xiao-Gui, Zhan; Yin-Hua, Chen; Feng, Gao

2010-01-01

We propose simple schemes for generating W-type multipartite entangled states in cavity quantum electrodynamics (CQED). Our schemes involve a largely detuned interaction of Λ-type three-level atoms with a single-mode cavity field and a classical laser, and both the symmetric and asymmetric W states can be created in a single step. Our schemes are insensitive to both the cavity decay and atomic spontaneous emission. With the above system, we also propose a scheme for realizing quantum-information concentration which is the reverse process of quantum cloning. In this scheme, quantum-information originally coming from a single qubit, but now distributed into many qubits, is concentrated back to a single qubit in only one step. (general)

Predictions by the multimedia environmental fate model SimpleBox compared to field data: Intermedia concentration ratios of two phthalate esters

NARCIS (Netherlands)

Struijs J; Peijnenburg WJGM; ECO

2003-01-01

The multimedia environmental fate model SimpleBox is applied to compute steady-state concentration ratios with the aim to harmonize environmetal quality objectives of air, water, sediment and soil. In 1995 the Dutch Health Council recommended validation of the model. Several activities were

Economic and Environmental Considerations for Zero-emission Transport and Thermal Energy Generation on an Energy Autonomous Island

Directory of Open Access Journals (Sweden)

Fontina Petrakopoulou

2018-01-01

Full Text Available The high cost and environmental impact of fossil-fuel energy generation in remote regions can make renewable energy applications more competitive than business-as-usual scenarios. Furthermore, energy and transport are two of the main sectors that significantly contribute to global greenhouse gas emissions. This paper focuses on the generation of thermal energy and the transport sector of a fossil fuel-based energy independent island in Greece. We evaluate (1 technologies for fully renewable thermal energy generation using building-specific solar thermal systems and (2 the replacement of the vehicle fleet of the island with electric and hydrogen-fueled vehicles. The analysis, based on economic and environmental criteria, shows that although solar thermal decreases greenhouse gases by 83%, when compared to the current diesel-based situation, it only becomes economically attractive with subsidy scenarios equal to or higher than 50%. However, in the transport sector, the sum of fuel and maintenance costs of fuel-cell and electric vehicles is found to be 45% lower than that of the current fleet, due to their approximately seven times lower fuel cost. Lastly, it will take approximately six years of use of the new vehicles to balance out the emissions of their manufacturing phase.

STAKEHOLDER OPINION-BASED COMPARISON OF LIFE CYCLE ENVIRONMENTAL IMPACTS OF ELECTRICITY GENERATION IN TURKEY WITH SELECTED EUROPEAN COUNTRIES

OpenAIRE

Gorkem Uctug

2017-01-01

The life cycle environmental impacts of electricity generation in Turkey were compared to those of Denmark, France, and Poland. The reason for selecting these particular countries for benchmarking was the fact that electricity generation in these countries is dominated mostly by a single source, that is wind, nuclear, and coal, respectively. OpenLCA software and European Life Cycle Database database were used, CML2001 method was employed. The life cycle analysis approach was from cradle to gr...

Urinary concentrations of environmental phenols in pregnant women in a pilot study of the National Children's Study

Energy Technology Data Exchange (ETDEWEB)

Mortensen, Mary E., E-mail: MMortensen@cdc.gov [National Center for Environmental Health, Centers for Disease Control and Prevention, Atlanta, GA (United States); Calafat, Antonia M.; Ye, Xiaoyun; Wong, Lee-Yang [National Center for Environmental Health, Centers for Disease Control and Prevention, Atlanta, GA (United States); Wright, David J. [Westat, Inc. Rockville, MD (United States); Pirkle, James L. [National Center for Environmental Health, Centers for Disease Control and Prevention, Atlanta, GA (United States); Merrill, Lori S. [Westat, Inc. Rockville, MD (United States); Moye, John [NCS Program Office, Eunice Kennedy Shriver National Institute for Child Health and Human Development, National Institutes for Health, Bethesda, MD (United States)

2014-02-01

Environmental phenols are a group of chemicals with widespread uses in consumer and personal care products, food and beverage processing, and in pesticides. We assessed exposure to benzophenone-3, bisphenol A (BPA), triclosan, methyl- and propyl parabens, and 2,4- and 2,5-dichlorophenol or their precursors in 506 pregnant women enrolled in the National Children's Study (NCS) Vanguard Study. We measured the urinary concentrations of the target phenols by using online solid-phase extraction–isotope dilution high performance liquid chromatography–tandem mass spectrometry. NCS women results were compared to those of 524 similar-aged women in the National Health and Nutrition Examination Survey (NHANES) 2009–2010, and to 174 pregnant women in NHANES 2005–2010. In the NCS women, we found significant racial/ethnic differences (p<0.05) in regression adjusted mean concentrations of benzophenone-3, triclosan, 2,4- and 2,5-dichlorophenol, but not of BPA. Urinary 2,4- and 2,5-dichlorophenol concentrations were highly correlated (r=0.66, p<0.0001). Except for BPA and triclosan, adjusted mean concentrations were significantly different across the 7 study sites. Education was marginally significant for benzophenone-3, triclosan, propyl paraben, and 2,5-dichlorophenol. Urinary concentrations of target phenols in NCS pregnant women and U.S. women and pregnant women were similar. In NCS pregnant women, race/ethnicity and geographic location determined urinary concentrations of most phenols (except BPA), suggesting differential exposures. NCS Main Study protocols should collect urine biospecimens and information about exposures to environmental phenols. - Highlights: • Limited biomonitoring data are available in pregnant women. • Seven urinary phenols were measured in 506 third trimester women enrolled in the NCS. • Urine benzophenone-3, triclosan, 2,4- and 2,5-dichlorophenol differed by race/ethnicity. • Urinary concentrations of 2,4- and 2,5-dichlorophenol were

Footwear and flooring: charge generation in combination with a person as influenced by environmental moisture

Science.gov (United States)

Swenson, D. E.

2015-10-01

It is well known that a person walking on a floor will liberate electrostatic charge. The amount of charge that can be accumulated on a person by walking is dependent on many factors that are also well understood. Among these factors is the electrical resistance between a person and ground. The electrical resistance of footwear, other clothing, a person's skin resistance and the contact resistance between footwear and the floor impact the total resistance of the system. As important as measuring resistance may be as an evaluation method, it does not take into account triboelectric generation of charge. The recent revisions of ANSI/ESD S20.20[1] from the ESD Association and IEC61340-5-1[2] from IEC TC101 - Electrostatics, both include a dynamic walking test since experience in recent years has shown that resistance alone does not predict how a footwear and flooring system will actually perform. The USA group ASHRAE1, commissioned a study to evaluate electrostatic charge generation inside data centres as influenced by environmental moisture (relative and absolute humidity)[3][4]. The reason for this study is that past data centre operating guidelines have called for a very narrow range of temperature and humidity control, largely because of the anecdotal evidence that moderate to high RH impacts static electricity generation and accumulation. This results in a massive consumption of electricity to maintain a narrow window of temperature and environmental moisture. Broadening or eliminating humidity controls could result in a major saving of electricity and money.

A review of plutonium environmental data with a bibliography for use in risk assessments

International Nuclear Information System (INIS)

Bartram, B.W.; Wilkinson, M.J.

1983-01-01

Plutonium fueled radioisotopic heat sources find space, terrestrial, and undersea applications to generate electrical power. Such systems under postulated accident conditions could release radioactivity into the environment resulting in risks to the general population in the form of radiological doses and associated health effects. The evaluation of the radiological impact of postulated scenarios involving releases of activity into the environment includes identification of postulated accident release modes, including the probability of release and the release location; source term definition, including the activity of each radionuclide released and the corresponding chemical form and particle size distribution; analysis of the environmental behavior of the released radioactivity to determine the concentrations in environmental media (air, soil, and water) as a function of time; and analysis of the interaction between the environmental concentrations and man, leading to ingestion, inhalation, and external doses through each environmental exposure pathway. 443 refs., 2 figs., 4 tabs

Life cycle assessment and economic analysis of a low concentrating photovoltaic system.

Science.gov (United States)

De Feo, G; Forni, M; Petito, F; Renno, C

2016-10-01

Many new photovoltaic (PV) applications, such as the concentrating PV (CPV) systems, are appearing on the market. The main characteristic of CPV systems is to concentrate sunlight on a receiver by means of optical devices and to decrease the solar cells area required. A low CPV (LCPV) system allows optimizing the PV effect with high increase of generated electric power as well as decrease of active surface area. In this paper, an economic analysis and a life cycle assessment (LCA) study of a particular LCPV scheme is presented and its environmental impacts are compared with those of a PV traditional system. The LCA study was performed with the software tool SimaPro 8.0.2, using the Econinvent 3.1 database. A functional unit of 1 kWh of electricity produced was chosen. Carbon Footprint, Ecological Footprint and ReCiPe 2008 were the methods used to assess the environmental impacts of the LCPV plant compared with a corresponding traditional system. All the methods demonstrated the environmental convenience of the LCPV system. The innovative system allowed saving 16.9% of CO2 equivalent in comparison with the traditional PV plant. The environmental impacts saving was 17% in terms of Ecological Footprint, and, finally, 15.8% with the ReCiPe method.

Joint environmental and cost efficiency analysis of electricity generation

International Nuclear Information System (INIS)

Welch, Eric; Barnum, Darold

2009-01-01

Fossil-fuel based electricity generation produces the largest proportion of human-related carbon pollution in the United States. Hence, fuel choices by steam plants are key determinants of the industry's impact on national and global greenhouse gas emissions, and key foci for climate change policy. Yet, little research has been done to examine the economic and environmental tradeoffs among the different types of fuels that are used by these plants. This paper applies a Data Envelopment Analysis procedure that incorporates the materials balance principle to estimate the allocations of coal, gas and oil inputs that minimize carbon emissions and costs. Using EIA 906 and FERC 423 data, the paper estimates cost/carbon tradeoffs facing two sets of plants: those that use coal and gas inputs, and those that use coal, gas and oil inputs. Findings for our three-input sample show that there would be a 79% increase in cost for moving from the cost-efficient point to the carbon efficient point, while there would be a 38% increase in carbon for moving from the carbon efficient point to the cost-efficient point. These conclusions indicate that, in general, the gap between efficient cost and efficient environmental production is wide, and would require substantial policy intervention, technological change or market adjustment before it could be narrowed. However, our examination of individual plants shows that what is true in general is often not true for specific plants. Some plants that are currently less efficient than those on the production frontier could produce the same amount of electricity with less carbon output and less fuel input. Additionally, many plants on the production frontier could improve both cost and carbon efficiency by changing their mixture of fossil-fuel inputs. (author)

Numerical simulation of a Linear Fresnel Reflector Concentrator used as direct generator in a Solar-GAX cycle

Energy Technology Data Exchange (ETDEWEB)

Velazquez, N.; Sauceda, D.; Beltran, R. [Instituto de Ingenieria, Universidad Autonoma de Baja California, Blvd. Benito Juarez y Calle de la Normal s/n, Mexicali, Baja California 21280 (Mexico); Garcia-Valladares, O. [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico, Privada Xochicalco s/n, Temixco, Morelos 62580 (Mexico)

2010-03-15

In this work a methodological analysis to design and evaluate the technical feasibility of use a Linear Fresnel Reflector Concentrator (LFRC) as generator in an advanced absorption refrigeration system (Solar-GAX cycle) has been carried out. For this purpose, a detailed one-dimensional numerical simulation of the thermal and fluid-dynamic behavior of a LFRC that solves, in a segregated manner, four subroutines: (a) fluid flow inside the receptor tube, (b) heat transfer in the receptor tube wall, (c) heat transfer in cover tube wall, and (d) solar thermal analysis in the solar concentrator has been developed. The LFRC numerical model has been validated with experimental data obtained from the technical literature; after that, a parametric study for different configurations of design has been carried out in order to obtain the highest solar concentration with the lowest thermal losses, keeping in mind both specific weather conditions and construction restrictions. The numerical result obtained demonstrates that using a LFRC as a direct generator in a Solar-GAX cycle satisfy not only the quantity and quality of the energy demanded by the advanced cooling system, it also allows to obtain higher global efficiencies of the system due to it can be operated in conditions where the maximum performance of the Solar-GAX cycle is obtained without affecting in any significant way the solar collector efficiency. (author)

Numerical simulation of a Linear Fresnel Reflector Concentrator used as direct generator in a Solar-GAX cycle

International Nuclear Information System (INIS)

Velazquez, N.; Garcia-Valladares, O.; Sauceda, D.; Beltran, R.

2010-01-01

In this work a methodological analysis to design and evaluate the technical feasibility of use a Linear Fresnel Reflector Concentrator (LFRC) as generator in an advanced absorption refrigeration system (Solar-GAX cycle) has been carried out. For this purpose, a detailed one-dimensional numerical simulation of the thermal and fluid-dynamic behavior of a LFRC that solves, in a segregated manner, four subroutines: (a) fluid flow inside the receptor tube, (b) heat transfer in the receptor tube wall, (c) heat transfer in cover tube wall, and (d) solar thermal analysis in the solar concentrator has been developed. The LFRC numerical model has been validated with experimental data obtained from the technical literature; after that, a parametric study for different configurations of design has been carried out in order to obtain the highest solar concentration with the lowest thermal losses, keeping in mind both specific weather conditions and construction restrictions. The numerical result obtained demonstrates that using a LFRC as a direct generator in a Solar-GAX cycle satisfy not only the quantity and quality of the energy demanded by the advanced cooling system, it also allows to obtain higher global efficiencies of the system due to it can be operated in conditions where the maximum performance of the Solar-GAX cycle is obtained without affecting in any significant way the solar collector efficiency.

Tourism and solid waste generation in Europe: A panel data assessment of the Environmental Kuznets Curve.

Science.gov (United States)

Arbulú, Italo; Lozano, Javier; Rey-Maquieira, Javier

2015-12-01

The relationship between tourism growth and municipal solid waste (MSW) generation has been, until now, the subject of little research. This is puzzling since the tourism sector is an important MSW generator and, at the same time, is willing to avoid negative impacts from MSW mismanagement. This paper aims to provide tools for tourism and MSW management by assessing the effects of tourism volume, tourism quality and tourism specialization on MSW generation in the UE. This is done using the Environmental Kuznets Curve (EKC) framework. The study considers a panel data for 32 European economies in the 1997-2010 periods. Empirical results support the EKC hypothesis for MSW and shows that northern countries tend to have lower income elasticity than less developed countries; furthermore, results confirm a non-linear and significant effect of tourism arrivals, expenditure per tourist and tourism specialization on MSW generation. Copyright © 2015 Elsevier Ltd. All rights reserved.

Next generation sequencing assays for benthic monitoring of the environmental impact associated with salmon farming (pilot study)

DEFF Research Database (Denmark)

Pawlowski, Jan; Esling, Philippe; Lejzerowicz, Franck

2015-01-01

This report presents the study of foraminiferal and metazoan benthic community based on next-generation sequencing (NGS) of environmental DNA and RNA (eDNA/RNA). The objective of this study was to test the application of NGS assays for benthic monitoring of salmon farms in Norway, in order to ove...

Relating Magnetic Parameters to Heavy Metal Concentrations and Environmental Factors at Formosa Mine Superfund Site, Douglas County, OR

Science.gov (United States)

Upton, T. L.

2016-12-01

Advances in the field of environmental magnetism have led to exciting new applications for this field. Magnetic minerals are ubiquitous in the environment and tend to have an affinity for heavy metals. Hence, it has been demonstrated that magnetic properties are often significantly related to concentrations of heavy metals and other pollutants. As a result, magnetic techniques have been used as proxy for determining hot spots of several types of pollution produced from a diversity of anthropogenic sources. Magnetic measurements are non-destructive and relatively inexpensive compared to geochemical analyses. The utility of environmental magnetic methods varies widely depending on biological, chemical and physical processes that create and transform soils and sediments. Applications in the direction of mapping heavy metals have been studied and shown to be quite useful in countries such as China and India but to date, little research has been done in the US. As such, there is need to expand the scope of research to a wider range of soil types and land uses, especially within the US. This study investigates the application of environmental magnetic techniques to mapping of heavy metal concentrations at the Formosa Mine Superfund Site, an abandoned mine about 25 miles southwest of Roseburg, OR. The soils and sediment at this site are derived from pyrite-rich bedrock which is weak in terms of magnetic susceptibility. Using hotspot analysis, correlation and cluster analyses, interactions between metals and magnetic parameters are investigated in relation to environmental factors such as proximity to seeps and adits. Preliminary results suggest significant correlation of magnetic susceptibility with certain heavy metals, signifying that magnetic methods may be useful in mapping heavy metal hotspots at this site. Further analysis examines the relation of various land use differences in magnetic signatures obtained throughout the Cow Creek watershed.

The role of advanced nuclear plants in reducing the environmental and economic impact of greenhouse emissions on electrical generation

International Nuclear Information System (INIS)

Redding, J.; Veitch, C.

1995-01-01

The paper discusses the potential impact of imposing economic penalties (externalities) in an effort to reduce emission levels and environmental effect of existing and newly constructed electric facilities, on the selection of generation technology and fuel type, and how the nuclear industry's efforts to develop the next generation of nuclear power facilities will provide an economic, low emission generating option to meet the expanding global electrical needs. The efforts of the US nuclear industry to improve the performance and economics of the existing and next generation facilities are presented, focusing on General Electric's Advanced Boiling Water Reactor and Simplified Boiling Water Reactor. 5 refs., 4 figs., 2 tabs

How cyclophosphamide at environmentally relevant concentration influences Daphnia magna life history and its proteome.

Directory of Open Access Journals (Sweden)

Małgorzata Grzesiuk

Full Text Available The waste of commonly used medicines is known to contaminate freshwater ecosystems. Pharmaceuticals can be toxic, mutagenic, or modifying to freshwater organisms even at low concentrations if consider their permanent presence in the environment. Chemotherapeutics used to treat cancer, and in particular alkylating agents, contribute significantly to this form of pollution, the latter introducing cytotoxic and/or mutagenic lesions to the DNA and RNA of organisms which can be disruptive to their cells. The aim of the present study was to investigate the influence of the alkylating anticancer agent cyclophosphamide (CP on Daphnia magna clones. We evaluated the life history parameters and protein profiles of this crustacean following exposure to environmentally relevant CP concentration of 10 ng L-1. Even at this low concentration, the alkylating agent caused modification of the life history parameters and proteome profile of the Daphnia. These changes were clone-specific and involved growth rate, age at first reproduction, neonate number, and proteins related to cell cycle and redox state regulation. The disturbance caused by pharmaceuticals contaminating freshwater ecosystem is probably weaker and unlikely to be cytotoxic in character due to the high dilution of these substances in the water. However, our results indicate that prolonged exposure of organisms to these toxins may lead to modifications on the organismal and molecular levels with unpredictable significance for the entire ecosystem.

Concentrated photovoltaics, a case study

Directory of Open Access Journals (Sweden)

Antonini Piergiorgio

2014-01-01

Full Text Available Concentrated Photovoltaics (CPV, once a niche technology, has now reached the maturity and reliability for large scale power generation. Especially in regions where temperatures are very high, the use of high efficiency triple junction solar cells with concentrating optics allows stable energy yield. Thus CPV can be seen as complementary and not in concurrence with silicon photovoltaics. The state of the art, the advantages and limitations of this technology will be shown. Among the main advantages of CPV is the possibility of a much higher energy supply, when compared to silicon photovoltaics, both comparing CPV and silicon with same area or the same installed power. The use of recycled and recyclable materials allows a more environmentally friendly production. The possibility to couple CPV with desalination facilities, energy storage will be analysed. As an example a case study of a CPV installation in Northern Italy is discussed. Here the use of mature technologies, derived from automotive and lighting sectors resulted in a simple and efficient module.

Concentrating PV/T Hybrid System for Simultaneous Electricity and Usable Heat Generation: A Review

Directory of Open Access Journals (Sweden)

Longzhou Zhang

2012-01-01

Full Text Available Photovoltaic (PV power generation is one of the attractive choices for efficient utilization of solar energy. Considering that the efficiency and cost of PV cells cannot be significantly improved in near future, a relatively cheap concentrator to replace part of the expensive solar cells could be used. The photovoltaic thermal hybrid system (PV/T, combining active cooling with thermal electricity and providing both electricity and usable heat, can enhance the total efficiency of the system with reduced cell area. The effect of nonuniform light distribution and the heat dissipation on the performance of concentrating PV/T was discussed. Total utilization of solar light by spectral beam splitting technology was also introduced. In the last part, we proposed an integrated compound parabolic collector (CPC plate with low precision solar tracking, ensuring effective collection of solar light with a significantly lowered cost. With the combination of beam splitting of solar spectrum, use of film solar cell, and active liquid cooling, efficient and full spectrum conversion of solar light to electricity and heat, in a low cost way, might be realized. The paper may offer a general guide to those who are interested in the development of low cost concentrating PV/T hybrid system.

Indoor air quality environmental information handbook: Combustion sources

Energy Technology Data Exchange (ETDEWEB)

1990-06-01

This environmental information handbook was prepared to assist both the non-technical reader (i.e., homeowner) and technical persons (such as researchers, policy analysts, and builders/designers) in understanding the current state of knowledge regarding combustion sources of indoor air pollution. Quantitative and descriptive data addressing the emissions, indoor concentrations, factors influencing indoor concentrations, and health effects of combustion-generated pollutants are provided. In addition, a review of the models, controls, and standards applicable to indoor air pollution from combustion sources is presented. The emphasis is on the residential environment. The data presented here have been compiled from government and privately-funded research results, conference proceedings, technical journals, and recent publications. It is intended to provide the technical reader with a comprehensive overview and reference source on the major indoor air quality aspects relating to indoor combustion activities, including tobacco smoking. In addition, techniques for determining potential concentrations of pollutants in residential settings are presented. This is an update of a 1985 study documenting the state of knowledge of combustion-generated pollutants in the indoor environment. 191 refs., 51 figs., 71 tabs.

Direct analysis of δ13C and concentration of dissolved organic carbon (DOC) in environmental samples by TOC-IRMS

Science.gov (United States)

Kirkels, Frédérique; Cerli, Chiara; Federherr, Eugen; Kalbitz, Karsten

2014-05-01

Dissolved organic carbon (DOC) plays an important role in carbon cycling in terrestrial and aquatic systems. Stable isotope analysis (delta 13C) of DOC could provide valuable insights in its origin, fluxes and environmental fate. Precise and routine analysis of delta 13C and DOC concentration are therefore highly desirable. A promising, new system has been developed for this purpose, linking a high-temperature combustion TOC analyzer trough an interface with a continuous flow isotope ratio mass spectrometer (Elementar group, Hanau, Germany). This TOC-IRMS system enables simultaneous stable isotope (bulk delta 13C) and concentration analysis of DOC, with high oxidation efficiency by high-temperature combustion for complex mixtures as natural DOC. To give delta 13C analysis by TOC-IRMS the necessary impulse for broad-scale application, we present a detailed evaluation of its analytical performance for realistic and challenging conditions inclusive low DOC concentrations and environmental samples. High precision (standard deviation, SD predominantly TOC-IRMS and conventional EA-IRMS) were achieved by TOC-IRMS for a broad diversity of DOC solutions. This precision is comparable or even slightly better than that typically reported for EA-IRMS systems, and improves previous techniques for δ13C analysis of DOC. Simultaneously, very good precision was obtained for DOC concentration measurements. Assessment of natural abundance and slightly 13C enriched DOC, a wide range of concentrations (0.2-150 mgC/L) and injection volumes (0.05-3 ml), demonstrated good analytical performance with negligible memory effects, no concentration/volume effects and a wide linearity. Low DOC concentrations (TOC-IRMS was successfully applied to analyze DOC from diverse terrestrial, freshwater and marine environments (SD TOC-IRMS performs fast and reliable analysis of DOC concentration and δ13C in aqueous samples, without any pre-concentration/freeze-drying. Flexible usage is highlighted by

1986 environmental monitoring report

International Nuclear Information System (INIS)

Miltenberger, R.P.; Royce, B.A.; Naidu, J.R.

1987-06-01

The environmental levels of radioactivity and other pollutants found in the vicinity of BNL during 1986 are summarized in this report. The environmental data include external radiation levels; radioactive air particulates and halogens; tritium concentrations; the amounts and concentrations of radioactivity in and the water quality of the stream into which liquid effluents are released; the organics, radioactivity, and water quality of the potable supply wells; the concentrations of radioactivity in biota from the stream; and the concentrations of organics, radioactivity, and the water quality of ground waters underlying the Laboratory. In 1986, the results of the surveillance program demonstrated that the Laboratory has operated within the applicable environmental standards

Integration between direct steam generation in linear solar collectors and supercritical carbon dioxide Brayton power cycles

OpenAIRE

Coco Enríquez, Luis; Muñoz Antón, Javier; Martínez-Val Peñalosa, José María

2015-01-01

Direct Steam Generation in Parabolic Troughs or Linear Fresnel solar collectors is a technology under development since beginning of nineties (1990's) for replacing thermal oils and molten salts as heat transfer fluids in concentrated solar power plants, avoiding environmental impacts. In parallel to the direct steam generation technology development, supercritical Carbon Dioxide Brayton power cycles are maturing as an alternative to traditional Rankine cycles for increasing net plant efficie...

Prediction of Adsorption Equilibrium of VOCs onto Hyper-Cross-Linked Polymeric Resin at Environmentally Relevant Temperatures and Concentrations Using Inverse Gas Chromatography.

Science.gov (United States)

Jia, Lijuan; Ma, Jiakai; Shi, Qiuyi; Long, Chao

2017-01-03

Hyper-cross-linked polymeric resin (HPR) represents a class of predominantly microporous adsorbents and has good adsorption performance toward VOCs. However, adsorption equilibrium of VOCs onto HPR are limited. In this research, a novel method for predicting adsorption capacities of VOCs on HPR at environmentally relevant temperatures and concentrations using inverse gas chromatography data was proposed. Adsorption equilibrium of six VOCs (n-pentane, n-hexane, dichloromethane, acetone, benzene, 1, 2-dichloroethane) onto HPR in the temperature range of 403-443 K were measured by inverse gas chromatography (IGC). Adsorption capacities at environmentally relevant temperatures (293-328 K) and concentrations (P/P s = 0.1-0.7) were predicted using Dubinin-Radushkevich (DR) equation based on Polany's theory. Taking consideration of the swelling properties of HPR, the volume swelling ratio (r) was introduced and r·V micro was used instead of V micro determined by N 2 adsorption data at 77 K as the parameter q 0 (limiting micropore volume) of the DR equation. The results showed that the adsorption capacities of VOCs at environmentally relevant temperatures and concentrations can be predicted effectively using IGC data, the root-mean-square errors between the predicted and experimental data was below 9.63%. The results are meaningful because they allow accurate prediction of adsorption capacities of adsorbents more quickly and conveniently using IGC data.

Benthic diatom community response to environmental variables and metal concentrations in a contaminated bay adjacent to Casey Station, Antarctica

International Nuclear Information System (INIS)

Cunningham, Laura; Snape, Ian; Stark, Jonathan S.; Riddle, Martin J.

2005-01-01

This study examined the effects of anthropogenic contaminants and environmental variables on the composition of benthic diatom communities within a contaminated bay adjacent to an abandoned waste disposal site in Antarctica. The combination of geographical, environmental and chemical data included in the study explained all of the variation observed within the diatom communities. The chemical data, particularly metal concentrations, explained 45.9% of variation in the diatom communities, once the effects of grain-size and spatial structure had been excluded. Of the metals, tin explained the greatest proportion of variation in the diatom communities (28%). Tin was very highly correlated (R 2 > 0.95) with several other variables (copper, iron, lead, and sum of metals), all of which explained similarly high proportions of total variation. Grain-size data explained 23% of variation once the effects of spatial structure and the chemical data had been excluded. The pure spatial component explained only 1.8% of the total variance. The study demonstrates that much of the compositional variability observed in the bay can be explained by concentrations of metal contaminants

Effects of cadmium on life-cycle parameters in a multi-generation study with Chironomus riparius following a pre-exposure of populations to two different tributyltin concentrations for several generations.

Science.gov (United States)

Vogt, Christian; Hess, Maren; Nowak, Carsten; Diogo, João Barateiro; Oehlmann, Jörg; Oetken, Matthias

2010-10-01

So far only a few studies have been performed to assess the effects of dynamic pollutant exposure on life-history parameters of invertebrates. In a previous multi-generation approach with the midge Chironomus riparius we tested if a chronic tributyltin pre-exposure alters the ability of a population to cope with subsequent cadmium stress. In the experiment two separate chironomid populations were exposed via sediments to different TBT-concentrations (4.46 and 8.93 μg Sn/kg dw) for several generations, followed by subsequent cadmium exposure (1.2 mg Cd/kg dw) for three generations. While the TBT-exposure to 4.46 μg Sn/kg dw had only small effects on the development and reproduction of C. riparius the higher TBT-concentration of 8.93 μg Sn/kg dw led to negative effects on life-history traits. Therefore, a higher adverse effect of the higher TBT-concentration and thus a higher susceptibility to other stressors could be assumed. Within, this paper only the results of the second stressor experiment were presented; clear effects of Cd on development and reproduction of C. riparius were determined independent of the pre-exposure scenario. While no differences in Cd-sensitivity were found between the population without pre-exposure to TBT and the population pre-exposed to the low TBT-concentration (4.46 μg Sn/kg dw), the pre-exposure of midges to the higher TBT-concentration (8.93 μg Sn/kg dw) resulted in a significantly higher susceptibility to subsequent Cd-stress. These results document that the exposure history may influence the reaction to altered chemical stress. Our findings are relevant to understand and predict the evolutionary fate of populations in rapidly changing, human-impacted environments. However, the fact that chemical-induced reduced genetic diversity, which is not necessarily linked to genetic adaptation, leads to a reduced fitness under altered stress conditions, is to our knowledge a novel finding.

Infrared detection of ore variability that influences the environmental risks during perlite mining and processing

NARCIS (Netherlands)

Guatame Garcia, L.A.; Buxton, M.W.N.

2017-01-01

In the mining of perlite deposits, controlling the generation of fine particles and the concentration of metals is of outstanding importance to meet the environmental and market requirements. Particle size and chemical purity are conventionally manipulated during the processing of the ore to achieve

Solar thermoelectric generator

Science.gov (United States)

Toberer, Eric S.; Baranowski, Lauryn L.; Warren, Emily L.

2016-05-03

Solar thermoelectric generators (STEGs) are solid state heat engines that generate electricity from concentrated sunlight. A novel detailed balance model for STEGs is provided and applied to both state-of-the-art and idealized materials. STEGs can produce electricity by using sunlight to heat one side of a thermoelectric generator. While concentrated sunlight can be used to achieve extremely high temperatures (and thus improved generator efficiency), the solar absorber also emits a significant amount of black body radiation. This emitted light is the dominant loss mechanism in these generators. In this invention, we propose a solution to this problem that eliminates virtually all of the emitted black body radiation. This enables solar thermoelectric generators to operate at higher efficiency and achieve said efficient with lower levels of optical concentration. The solution is suitable for both single and dual axis solar thermoelectric generators.

Environmental concentrations and toxicology of 2,4,6-tribromophenol (TBP).

Science.gov (United States)

Koch, Christoph; Sures, Bernd

2018-02-01

2,4,6-Tribromophenol is the most widely produced brominated phenol. In the present review, we summarize studies dealing with this substance from an environmental point of view. We cover concentrations in the abiotic and biotic environment including humans, toxicokinetics as well as toxicodynamics, and show gaps of the current knowledge about this chemical. 2,4,6-Tribomophenol occurs as an intermediate during the synthesis of brominated flame retardants and it similarly represents a degradation product of these substances. Moreover, it is used as a pesticide but also occurs as a natural product of some aquatic organisms. Due to its many sources, 2,4,6-tribromophenol is ubiquitously found in the environment. Nevertheless, not much is known about its toxicokinetics and toxicodynamics. It is also unclear which role the structural isomer 2,4,5-tribromophenol and several degradation products such as 2,4-dibromophenol play in the environment. Due to new flame retardants that enter the market and can degrade to 2,4,6-tribromophenol, this compound will remain relevant in future years - not only in aquatic matrices, but also in house dust and foodstuff, which are an important exposure route for humans. Copyright © 2017 Elsevier Ltd. All rights reserved.

Observations of concentrated generator regions in the nightside magnetosphere by Cluster/FAST conjunctions

Directory of Open Access Journals (Sweden)

M. Hamrin

2006-03-01

Full Text Available Here and in the companion paper, Marghitu et al. (2006, we investigate plausible auroral generator regions in the nightside auroral magnetosphere. In this article we use magnetically conjugate data from the Cluster and the FAST satellites during a 3.5-h long event from 19-20 September 2001. Cluster is in the Southern Hemisphere close to apogee, where it probes the plasma sheet and lobe at an altitude of about 18 RE. FAST is below the acceleration region at approximately 0.6 RE. Searching for clear signatures of negative power densities, E·J<0, in the Cluster data we can identify three concentrated generator regions (CGRs during our event. From the magnetically conjugate FAST data we see that the observed generator regions in the Cluster data correlate with auroral precipitation. The downward Poynting flux observed by Cluster, as well as the scale size of the CGRs, are consistent with the electron energy flux and the size of the inverted-V regions observed by FAST. To our knowledge, these are the first in-situ observations of the crossing of an auroral generator region. The main contribution to E·J<0 comes from the GSE EyJy. The electric field Ey is weakly negative during most of our entire event and we conclude that the CGRs occur when the duskward current Jy grows large and positive. We find that our observations are consistent with a local southward expansion of the plasma sheet and/or rather complicated, 3-D wavy structures propagating over the Cluster satellites. We find that the plasma is working against the magnetic field, and that kinetic energy is being converted into electromagnetic energy. Some of the energy is transported away as Poynting flux.

Environmentally relevant concentrations of citalopram partially inhibit feeding in the three-spine stickleback (Gasterosteus aculeatus).

Science.gov (United States)

Kellner, M; Porseryd, T; Porsch-Hällström, I; Hansen, S H; Olsén, K H

2015-01-01

Selective Serotonin Re-uptake Inhibitors (SSRI) are mood-altering, psychotropic drugs commonly used in the treatment of depression and other psychological illnesses. Many of them are poorly degraded in sewage treatment plants and enter the environment unaltered. In laboratory studies, they have been demonstrated to affect a wide range of behaviours in aquatic organisms. In this study we investigated the effect of a three-week exposure to 0.15 and 1.5 μg/l of the SSRI citalopram dissolved in the ambient water on the feeding behaviour in three-spine stickleback (Gasterosteus aculeatus). Feeding, measured as the number of attacks performed on a piece of frozen bloodworms during a 10-min period, was reduced by 30-40% in fish exposed to both 0.15 and 1.5 μg/l citalopram. The effects of the environmentally relevant concentration 0.15 μg/l on feeding, an important fitness characteristic, suggests that the ecological significance of environmental SSRI exposure may be pronounced. Copyright © 2014 Elsevier B.V. All rights reserved.

Using model-based screening to help discover unknown environmental contaminants.

Science.gov (United States)

McLachlan, Michael S; Kierkegaard, Amelie; Radke, Michael; Sobek, Anna; Malmvärn, Anna; Alsberg, Tomas; Arnot, Jon A; Brown, Trevor N; Wania, Frank; Breivik, Knut; Xu, Shihe

2014-07-01

Of the tens of thousands of chemicals in use, only a small fraction have been analyzed in environmental samples. To effectively identify environmental contaminants, methods to prioritize chemicals for analytical method development are required. We used a high-throughput model of chemical emissions, fate, and bioaccumulation to identify chemicals likely to have high concentrations in specific environmental media, and we prioritized these for target analysis. This model-based screening was applied to 215 organosilicon chemicals culled from industrial chemical production statistics. The model-based screening prioritized several recognized organosilicon contaminants and generated hypotheses leading to the selection of three chemicals that have not previously been identified as potential environmental contaminants for target analysis. Trace analytical methods were developed, and the chemicals were analyzed in air, sewage sludge, and sediment. All three substances were found to be environmental contaminants. Phenyl-tris(trimethylsiloxy)silane was present in all samples analyzed, with concentrations of ∼50 pg m(-3) in Stockholm air and ∼0.5 ng g(-1) dw in sediment from the Stockholm archipelago. Tris(trifluoropropyl)trimethyl-cyclotrisiloxane and tetrakis(trifluoropropyl)tetramethyl-cyclotetrasiloxane were found in sediments from Lake Mjøsa at ∼1 ng g(-1) dw. The discovery of three novel environmental contaminants shows that models can be useful for prioritizing chemicals for exploratory assessment.

Infrared detection of ore variability that influences the environmental risks during perlite mining and processing

OpenAIRE

Guatame Garcia, L.A.; Buxton, M.W.N.

2017-01-01

In the mining of perlite deposits, controlling the generation of fine particles and the concentration of metals is of outstanding importance to meet the environmental and market requirements. Particle size and chemical purity are conventionally manipulated during the processing of the ore to achieve high product specifications. However, the current practices do not consider a proactive approach that focuses in the in-pit characterisation of the ore that would minimise the environmental impact...

Two-phase flow modelling of a solar concentrator applied as ammonia vapor generator in an absorption refrigerator

Energy Technology Data Exchange (ETDEWEB)

Ortega, N. [Posgrado en Ingenieria (Energia), Universidad Nacional Autonoma de Mexico, Privada Xochicalco s/n, Temixco, Morelos 62580 (Mexico); Garcia-Valladares, O.; Best, R.; Gomez, V.H. [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico, Privada Xochicalco s/n, Temixco, Morelos 62580 (Mexico)

2008-09-15

A detailed one-dimensional numerical model describing the heat and fluid-dynamic behavior inside a compound parabolic concentrator (CPC) used as an ammonia vapor generator has been developed. The governing equations (continuity, momentum, and energy) inside the CPC absorber tube, together with the energy equation in the tube wall and the thermal analysis in the solar concentrator were solved. The computational method developed is useful for the solar vapor generator design applied to absorption cooling systems. The effect on the outlet temperature and vapor quality of a range of CPC design parameters was analyzed. These parameters were the acceptance half-angle and CPC length, the diameter and coating of the absorber tube, and the manufacture materials of the cover, the reflector, and the absorber tube. It was found that the most important design parameters in order to obtain a higher ammonia-water vapor production are, in order of priority: the reflector material, the absorber tube diameter, the selective surface, and the acceptance half-angle. The direct ammonia-water vapor generation resulting from a 35 m long CPC was coupled to an absorption refrigeration system model in order to determine the solar fraction, cooling capacity, coefficient of performance, and overall efficiency during a typical day of operation. The results show that approximately 3.8 kW of cooling at -10{sup o}C could be produced with solar and overall efficiencies up to 46.3% and 21.2%, respectively. (author)

Proposal for a technical-economic and environmental evaluation projects for distributed generation; Proposta de avaliacao tecnica-economica-ambiental para projetos de geracao distribuida

Energy Technology Data Exchange (ETDEWEB)

Fortes, Marcio Zamboti [Universidade Severino Sombra, Vassouras, RJ (Brazil); Gouvea, Marcos Roberto [Universidade de Sao Paulo (USP), SP (Brazil)

2008-07-01

The multi discipline effects in engineering projects, mainly in those of infrastructure, have extended the borders of research to not only evaluate them of the conventional point of view, economic and technical, but also environmental and social. On the other hand, the investor who traditionally searched alternatives only considering the economic and financial performance currently is taken to analyze also the social and environmental aspects. The model described in this paper is a solution proposal to evaluate the merit of an enterprise of distributed generation of thermal origin, considering the economic, social and environmental aspects, using merit indexes that quantify, directly, economic aspects as capital return tax and operating income eliminates, as well as social factors like the impact in the education, health, income and employment rates and still, it verifies the attendance of the environmental restrictions. The solution presented brings a simple and clear form to attribute a merit degree of aggregate to the alternatives to embed distributed generation, considering the intensity of the subjective social responsibility of the investor. The presented model is an important contribution to stimulate a form to evaluate and to prioritize the multi discipline implementation to a distributed generation enterprise, also being able, to be used as financial index or other incentives of the sort. (author)

Environmental magnetism and effective radium concentration: the case study of the painted cave of Pech Merle, France

Science.gov (United States)

Isambert, Aude; Girault, Frédéric; Perrier, Frédéric; Bouquerel, Hélène; Bourges, François

2017-04-01

Painted caves, showing testimony of prehistoric art, are nowadays subject to intense attention to understand the conditions of stability and avoid degradation. The preservation of cultural sequences and archaeological artefacts represents especially a crucial issue in the case of caves opened to visitors. For this purpose, a better knowledge of these preserved environments that imprint paleoenvironmental conditions at the time of deposition is needed. In this context, different environmental parameters of the Pech Merle cave, in France, are currently actively monitored including temperature, hygrometry, and gas measurements such as CO2 and radon-222 (decay product of radium-226). This temporal monitoring needs to be complemented by a detailed characterisation of the site, including petrophysical and mineralogical properties. To better constrain the environmental and paleoenvironmental context, more than 100 samples including soils, sediments, rocks and speleothems were collected inside and outside the cave area. We report here magnetic properties of powdered samples (low-field susceptibility, hysteresis parameters, and saturation magnetization) coupled with effective radium concentration (ECRa) measurements. We observe that magnetic susceptibility, which ranges over 5 orders of magnitude from calcareous rocks to topsoils and argillaceous filling deposits, correlates well with ECRa values. This correlation, previously observed (Girault et al., 2016) in very different geological contexts, could be interpreted as a common concentration of sources, also indicating a signature of natural samples to the contrary of anthropic environments disturbed by human activities, in which case the association is blurred. This study demonstrates the general interest of combining two different parameters - here low-field magnetic susceptibility and effective radium concentration determined using non-destructive techniques in the field and in the laboratory - to physically characterize

Assessing the environmental impact of energy production from hydrochar generated via hydrothermal carbonization of food wastes.

Science.gov (United States)

Berge, Nicole D; Li, Liang; Flora, Joseph R V; Ro, Kyoung S

2015-09-01

Although there are numerous studies suggesting hydrothermal carbonization is an environmentally advantageous process for transformation of wastes to value-added products, a systems level evaluation of the environmental impacts associated with hydrothermal carbonization and subsequent hydrochar combustion has not been conducted. The specific objectives of this work are to use a life cycle assessment approach to evaluate the environmental impacts associated with the HTC of food wastes and the subsequent combustion of the generated solid product (hydrochar) for energy production, and to understand how parameters and/or components associated with food waste carbonization and subsequent hydrochar combustion influence system environmental impact. Results from this analysis indicate that HTC process water emissions and hydrochar combustion most significantly influence system environmental impact, with a net negative GWP impact resulting for all evaluated substituted energy-sources except biomass. These results illustrate the importance of electricity production from hydrochar particularly when it is used to offset coal-based energy sources. HTC process water emissions result in a net impact to the environment, indicating a need for developing appropriate management strategies. Results from this analysis also highlight a need for additional exploration of liquid and gas-phase composition, a better understanding of how changes in carbonization conditions (e.g., reaction time and temperature) influence metal and nutrient fate, and the exploration of liquid-phase treatment. Copyright © 2015 Elsevier Ltd. All rights reserved.

Environmental Factors and Seasonality Affect the Concentration of Rotundone in Vitis vinifera L. cv. Shiraz Wine.

Directory of Open Access Journals (Sweden)

Pangzhen Zhang

Full Text Available Rotundone is a sesquiterpene that gives grapes and wine a desirable 'peppery' aroma. Previous research has reported that growing grapevines in a cool climate is an important factor that drives rotundone accumulation in grape berries and wine. This study used historical data sets to investigate which weather parameters are mostly influencing rotundone concentration in grape berries and wine. For this purpose, wines produced from 15 vintages from the same Shiraz vineyard (The Old Block, Mount Langi Ghiran, Victoria, Australia were analysed for rotundone concentration and compared to comprehensive weather data and minimal temperature information. Degree hours were obtained by interpolating available temperature information from the vineyard site using a simple piecewise cubic hermite interpolating polynomial method (PCHIP. Results showed that the highest concentrations of rotundone were consistently found in wines from cool and wet seasons. The Principal Component Analysis (PCA showed that the concentration of rotundone in wine was negatively correlated with daily solar exposure and grape bunch zone temperature, and positively correlated with vineyard water balance. Finally, models were constructed based on the Gompertz function to describe the dynamics of rotundone concentration in berries through the ripening process according to phenological and thermal times. This characterisation is an important step forward to potentially predict the final quality of the resultant wines based on the evolution of specific compounds in berries according to critical environmental and micrometeorological variables. The modelling techniques described in this paper were able to describe the behaviour of rotundone concentration based on seasonal weather conditions and grapevine phenological stages, and could be potentially used to predict the final rotundone concentration early in future growing seasons. This could enable the adoption of precision irrigation and

Environmental Factors and Seasonality Affect the Concentration of Rotundone in Vitis vinifera L. cv. Shiraz Wine

Science.gov (United States)

Zhang, Pangzhen; Howell, Kate; Krstic, Mark; Herderich, Markus; Barlow, Edward William R.; Fuentes, Sigfredo

2015-01-01

Rotundone is a sesquiterpene that gives grapes and wine a desirable ‘peppery’ aroma. Previous research has reported that growing grapevines in a cool climate is an important factor that drives rotundone accumulation in grape berries and wine. This study used historical data sets to investigate which weather parameters are mostly influencing rotundone concentration in grape berries and wine. For this purpose, wines produced from 15 vintages from the same Shiraz vineyard (The Old Block, Mount Langi Ghiran, Victoria, Australia) were analysed for rotundone concentration and compared to comprehensive weather data and minimal temperature information. Degree hours were obtained by interpolating available temperature information from the vineyard site using a simple piecewise cubic hermite interpolating polynomial method (PCHIP). Results showed that the highest concentrations of rotundone were consistently found in wines from cool and wet seasons. The Principal Component Analysis (PCA) showed that the concentration of rotundone in wine was negatively correlated with daily solar exposure and grape bunch zone temperature, and positively correlated with vineyard water balance. Finally, models were constructed based on the Gompertz function to describe the dynamics of rotundone concentration in berries through the ripening process according to phenological and thermal times. This characterisation is an important step forward to potentially predict the final quality of the resultant wines based on the evolution of specific compounds in berries according to critical environmental and micrometeorological variables. The modelling techniques described in this paper were able to describe the behaviour of rotundone concentration based on seasonal weather conditions and grapevine phenological stages, and could be potentially used to predict the final rotundone concentration early in future growing seasons. This could enable the adoption of precision irrigation and canopy

In-situ marine monitoring and environmental management of SWRO concentrate discharge: A case study of the KAUST SWRO plant

KAUST Repository

Van Der Merwe, Riaan

2014-06-01

Concentrate (when discharged to the ocean) may have chronic/acute impacts on marine ecosystems, particularly in the mixing zone around outfalls. The environmental impact of the desalination plant discharges is very site- and volumetric specific, and depends to a great extent on the salinity tolerance of the specific marine microbial communities as well as higher order organisms inhabiting the water column in and around this extreme discharge environment. Scientific studies that aim to grant insight into possible impacts of concentrate discharge are very important, in order to understand how this may affect different marine species when exposed to elevated salinity levels or residual chemicals from the treatment process in the discharge site. The objective of this PhD research was to investigate the potential environmental effects of the concentrate discharge in the near-field area around the submerged discharge of the King Abdullah University of Science and Technology (KAUST) seawater reverse osmosis (SWRO) plant by a combination of biological and hydrological studies. Possible changes in microbial abundance were assessed by using flow cytometric (FCM) analysis on a single-cell level in 107 samples, taken from the discharge area, the feed-water intake area and two control sites. Results indicate that changes in microbial abundance in the near-field area of the KAUST SWRO outfall are minor and appear to bethe result of a dilution effect rather than a direct impact of the concentrate discharge. In order to also investigate potential impacts on higher order organisms, a longterm in-situ salinity tolerance test at the discharge site was conducted on the coral Fungia granulosa and its photophysiology. The corals were exposed to elevated levels of salinity as a direct result of concentrate discharge. Their photosynthetic response after exposure to extreme salinity conditions around the full-scale operating SWRO desalination discharge was measured. A pulse amplitude

Environmental and economic assessment of landfill gas electricity generation in Korea using LEAP model

International Nuclear Information System (INIS)

Shin, Ho-Chul; Park, Jin-Won; Kim, Ho-Seok; Shin, Eui-Soon

2005-01-01

As a measure to establish a climate-friendly energy system, Korean government has proposed to expand landfill gas (LFG) electricity generation capacity. The purpose of this paper is to analyze the impacts of LFG electricity generation on the energy market, the cost of generating electricity and greenhouse gases emissions in Korea using a computer-based software tool called 'Long-range Energy Alternative Planning system' (LEAP) and the associated 'Technology and Environmental Database'. In order to compare LFG electricity generation with existing other generating facilities, business as usual scenario of existing power plants was surveyed, and then alternative scenario investigations were performed using LEAP model. Different alternative scenarios were considered, namely the base case with existing electricity facilities, technological improvement of gas engine and LFG maximum utilization potential with different options of gas engine (GE), gas turbine (GT), and steam turbine (ST). In the technological improvement scenario, there will be 2.86 GWh or more increase in electricity output, decrease of 45 million won (Exchange rate (1$=1200 won)). in costs, and increase of 10.3 thousand ton of CO 2 in global warming potentials due to same period (5 year) of technological improvement. In the maximum utilization potential scenario, LFG electricity generation technology is substituted for coal steam, nuclear, and combined cycle process. Annual cost per electricity product of LFG electricity facilities (GE 58MW, GT 53.5MW, and ST 54.5MW) are 45.1, 34.3, and 24.4 won/kWh, and steam turbine process is cost-saving. LFG-utilization with other forms of energy utilization reduces global warming potential by maximum 75% with compared to spontaneous emission of CH 4 . LFG electricity generation would be the good solution for CO 2 displacement over the medium term and additional energy profits

Fifty years of studies on environmental radioactivity in Peru

International Nuclear Information System (INIS)

Osores, Jose M.; Gonzales, Susana; Martinez, Jorge; Lopez, Edith; Jara, Raul; Anaya, Aurelio

2008-01-01

In May of 1962, due to the explosions carried out by the Commission of Atomic Energy of the United States in the Christmas Island, a group of professionals of the 'Junta de Control de Energia Atomica' of Peru, created in 1957, carried out experimental evaluations of atmospheric radioactivity, obtaining acceptable results regarding those of Naval US Research Laboratory, this was the beginning of the Laboratory of Atmospheric Radioactivity that begins to operate permanently in February of 1964. In 1966, France began a program of nuclear tests in the French Polynesian, generating concern due to the meteorological conditions that could affect the peruvian population. With the support of experts and equipments on the part of the government from France, the Laboratory of Environmental Radioactivity began their activities in August of 1966. At the present time, the Laboratory of Environmental Radioactivity is located in the Nuclear Center RACSO of the 'Instituto Peruano de Energia Nuclear' and it carries out the following programs: Radiological Environmental Surveillance in the Influence Area of the Nuclear Center, Nationwide Radiological Environmental Surveillance, Marine Radiological Environmental Surveillance, Radiological Environmental Surveillance in the Peruvian Antarctic Region and Surveillance of the Radioactive Contamination of Foods. The results of the evaluations of the programs of radiological environmental surveillance, developed nationwide from 1962, show one gradual decrease of the levels of environmental radioactivity. Significant concentrations of Cs-137 and Be-7 were found in the Antarctic region, and, in the area of influence of the nuclear center RACSO, environmental discharges of I-131, Cs-137, Co-60, Cs- 134 and Te-123m were detected, however, the concentrations did not present radiological risk for the population. (author)

40 CFR 761.64 - Disposal of wastes generated as a result of research and development activities authorized under...

Science.gov (United States)

2010-07-01

... includes: sample preparation, sample extraction, extract cleanup, extract concentration, addition of PCB.... 761.64 Section 761.64 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC... generated during the chemical analysis of samples containing PCBs under part 761, including §§ 761.30, 761...

Alternative Silver Production by Environmental Sound Processing of a Sulfo Salt Silver Mineral Found in Bolivia

Directory of Open Access Journals (Sweden)

Alexander Birich

2018-02-01

Full Text Available Very often, the production of silver causes devastating environmental issues, because of the use of toxic reagents like cyanide and mercury. Due to severe environmental damage caused by humans in the last decades, the social awareness regarding the sustainable production processes is on the rise. Terms like “sustainable” and “green” in product descriptions are becoming more and more popular and producers are forced to satisfy the rising environmental awareness of their customers. Within this work, an alternative environmental sound silver recovery process was developed for a vein type silver ore from Mina Porka, Bolivia. A foregoing characterization of the input material reveals its mineral composition. In the following mineral processing, around 92.9% silver was concentrated by separating 59.5 wt. % of non-silver minerals. Nitric acid leaching of the generated concentrate enabled a silver recovery of up to 98%. The dissolved silver was then separated via copper cementation to generate a metallic silver product of >99% purity. Summarizing all process steps, a silver yield of 87% was achieved in lab scale. A final upscaling trial was conducted to prove the process’ robustness. Within this trial, almost 4 kg of metallic silver with a purity of higher than 99.5 wt. % was produced.

Final environmental statement related to the operation of Limerick Generating Station, Units 1 and 2, Docket Nos. 50-352 and 50-353, Philadelphia Electric Company

International Nuclear Information System (INIS)

1989-08-01

In April 1984 the staff of the Nuclear Regulatory Commission issued its Final Environmental Statement (NUREG-0974) related to the operation of Limerick Generating Station, Units 1 and 2, (Docket Nos. 50-352 and 50-353), located on the Schuylkill River, near Pottstown, in Limerick Township, Montgomery and Chester Counties, Pennsylvania. The NRC has prepared this supplement to NUREG-0974 to present its evaluation of the alternative of facility operation with the installation of further severe accident mitigation design features. The NRC staff has discovered no substantial changes in the proposed action as previously evaluated in the Final Environmental Statement that are relevant to environmental concerns nor significant new circumstances or information relevant to environmental concerns and bearing on the licensing of Limerick Generating Station, Units 1 and 2. 15 refs., 10 tabs

Concentration levels of endocrine disrupting chemicals in environmental media of Korea

Energy Technology Data Exchange (ETDEWEB)

Yoon, Junheon; Choi, Kyunghee; Kim, Sangdon; Kim, Eunji; Kim, Eunkyoung; Jeon, Sung-Hwan; Na, Jin-Gyun [National Institute of Environmental Research, Incheon (Korea)

2004-09-15

Introduction As the public is more concerned about endocrine disrupting chemicals (EDCs), the Ministry of Environment in Korea has designed and established a mid- and long-term research plan on EDCs. Since 1999, the National Institute of Environmental Research has investigated the impact of EDCs on the natural ecosystem and carried out the field test for environmental monitoring. The goal of this study was to measure the contamination level of EDCs in a variety of environmental media, such as water, sediment, soil and air and to provide a basis for the sound management of EDCs and policy-making for the control of EDCs in Korea. Environmental monitoring sites were selected at representative sites through the nation. In 2002, 310 samples were collected from 122 sites of water, sediment, soil and air. The target EDCs examined were 93 chemicals in 45 chemical groups including Dioxin, coplanar PCBs, PCBs. Results show that 46 chemicals (31 chemical groups) including dioxins were detected in at least one environmental medium, while 47 chemicals including aldrin were not detected in any environmental media. In this study, the results of the fourth year of environmental monitoring are reported.

Terra Incognita: Absence of Concentrated Animal Feeding Operations from the National Land Cover Database and Implications for Environmental Risk

Science.gov (United States)

Martin, K. L.; Emanuel, R. E.; Vose, J. M.

2016-12-01

The number of concentrated animal feeding operations (CAFOs) has increased rapidly in recent decades. Although important to food supplies, CAFOs may present significant risks to human health and environmental quality. The National land cover database (NLCD) is a publically available database of land cover whose purpose is to provide assessment of ecosystem health, facilitate nutrient modeling, land use planning, and developing land management practices. However, CAFOs do not align with any existing NLCD land cover classes. This is especially concerning due to their distinct nutrient loading characteristics, potential for other environmental impacts, and given that individual CAFOs may occupy several NLCD pixels worth of ground area. Using 2011 NLCD data, we examined the land cover classification of CAFO sites in North Carolina (USA). Federal regulations require CAFOs with a liquid waste disposal system to obtain a water quality permit. In North Carolina, there were 2679 permitted sites as of 2015, primarily in the southeastern part of the state. As poultry operations most frequently use dry waste disposal systems, they are not required to obtain a permit and thus, their locations are undocumented. For each permitted CAFO, we determined the mode of the NLCD land uses within a 50m buffer surrounding point coordinates. We found permitted CAFOS were most likely to be classified as hay/pasture (58%). An additional 13% were identified as row crops, leaving 29% as a non-agricultural land cover class, including wetlands (12%). This misclassification of CAFOs can have implications for environmental management and public policy. Scientists and land managers need access to better spatial data on the distribution of these operations to monitor the environmental impacts and identify the best landscape scale mitigation strategies. We recommend adding a new land cover class (concentrated animal operations) to the NLCD database.

Dependence of Initial Oxygen Concentration on Ozone Yield Using Inductive Energy Storage System Pulsed Power Generator

Science.gov (United States)

Go, Tomio; Tanaka, Yasushi; Yamazaki, Nobuyuki; Mukaigawa, Seiji; Takaki, Koichi; Fujiwara, Tamiya

Dependence of initial oxygen concentration on ozone yield using streamer discharge reactor driven by an inductive energy storage system pulsed power generator is described in this paper. Fast recovery type diodes were employed as semiconductor opening switch to interrupt a circuit current within 100 ns. This rapid current change produced high-voltage short pulse between a secondary energy storage inductor. The repetitive high-voltage short pulse was applied to a 1 mm diameter center wire electrode placed in a cylindrical pulse corona reactor. The streamer discharge successfully occurred between the center wire electrode and an outer cylinder ground electrode of 2 cm inner diameter. The ozone was produced with the streamer discharge and increased with increasing pulse repetition rate. The ozone yield changed in proportion to initial oxygen concentration contained in the injected gas mixture at 800 ns forward pumping time of the current. However, the decrease of the ozone yield by decreasing oxygen concentration in the gas mixture at 180 ns forward pumping time of the current was lower than the decrease at 800 ns forward pumping time of the current. This dependence of the initial oxygen concentration on ozone yield at 180 ns forward pumping time is similar to that of dielectric barrier discharge reactor.

Association of Children’s Urinary CC16 Levels with Arsenic Concentrations in Multiple Environmental Media

Directory of Open Access Journals (Sweden)

Paloma I. Beamer

2016-05-01

Full Text Available Arsenic exposure has been associated with decreased club cell secretory protein (CC16 levels in adults. Further, both arsenic exposure and decreased levels of CC16 in childhood have been associated with decreased adult lung function. Our objective was to determine if urinary CC16 levels in children are associated with arsenic concentrations in environmental media collected from their homes. Yard soil, house dust, and tap water were taken from 34 homes. Urine and toenail samples were collected from 68 children. All concentrations were natural log-transformed prior to data analysis. There were associations between urinary CC16 and arsenic concentration in soil (b = −0.43, p = 0.001, R2 = 0.08, water (b = −0.22, p = 0.07, R2 = 0.03, house dust (b = −0.37, p = 0.07, R2 = 0.04, and dust loading (b = −0.21, p = 0.04, R2 = 0.04. In multiple analyses, only the concentration of arsenic in soil was associated with urinary CC16 levels (b = −0.42, p = 0.02, R2 = 0.14 (full model after accounting for other factors. The association between urinary CC16 and soil arsenic may suggest that localized arsenic exposure in the lungs could damage the airway epithelium and predispose children for diminished lung function. Future work to assess this possible mechanism should examine potential associations between airborne arsenic exposures, CC16 levels, lung function, and other possible confounders in children in arsenic-impacted communities.

Individual and environmental risk factors for high blood lead concentrations in Danish indoor shooters.

Science.gov (United States)

Grandahl, Kasper; Suadicani, Poul; Jacobsen, Peter

2012-08-01

International studies have shown blood lead at levels causing health concern in recreational indoor shooters. We hypothesized that Danish recreational indoor shooters would also have a high level of blood lead, and that this could be explained by shooting characteristics and the physical environment at the shooting range. This was an environmental case study of 58 male and female shooters from two indoor shooting ranges with assumed different ventilation and cleaning conditions. Information was obtained on general conditions including age, gender, tobacco and alcohol use, and shooting conditions: weapon type, number of shots fired, frequency of stays at the shooting range and hygiene habits. A venous blood sample was drawn to determine blood lead concentrations; 14 non-shooters were included as controls. Almost 60% of the shooters, hereof five out of 14 women, had a blood lead concentration above 0.48 micromol/l, a level causing long-term health concern. All controls had blood lead values below 0.17 micromol/l. Independent significant associations with blood lead concentrations above 0.48 micromol/l were found for shooting at a poorly ventilated range, use of heavy calibre weapons, number of shots and frequency of stays at the shooting range. A large proportion of Danish recreational indoor shooters had potentially harmful blood lead concentrations. Ventilation, amounts of shooting, use of heavy calibre weapons and stays at the shooting ranges were independently associated with increased blood lead. The technical check at the two ranges was performed by the Danish Technological Institute and costs were defrayed by the Danish Rifle Association. To pay for the analyses of blood lead, the study was supported by the The Else & Mogens Wedell-Wedellsborg Foundation. The Danish Regional Capital Scientific Ethics Committee approved the study, protocol number H-4-2010-130.

Arctic vegetation damage by winter-generated coal mining pollution released upon thawing

DEFF Research Database (Denmark)

Elberling, B.; Søndergaard, J.; Jensen, L.A.

2007-01-01

Acid mine drainage (known as AMD) is a well-known environmental problem resulting from the oxidation of sulfidic mine waste. In cold regions, AMD is often considered limited by low temperatures most of the year and observed environmental impact is related to pollution generated during the warm...... summer period. Here we show that heat generation within an oxidizing, sulfidic, coal-mining waste-rock pile in Svalbard (78° N) is high enough to keep the pile warm (roughly 5 °C throughout the year) despite mean annual air temperatures below -5 °C. Consequently, weathering processes continue year...... of these metals are taken up and accumulated in plants where they reach phytotoxic levels, including aluminum and manganese. Laboratory experiments document that uptake of Al and Mn in native plant species is highly correlated with dissolved concentrations. Therefore, future remedial actions to control...

Use of an integrated biomarker-based strategy to evaluate physiological stress responses induced by environmental concentrations of caffeine in the Mediterranean mussel Mytilus galloprovincialis.

Science.gov (United States)

Capolupo, Marco; Valbonesi, Paola; Kiwan, Alisar; Buratti, Sara; Franzellitti, Silvia; Fabbri, Elena

2016-09-01

The occurrence of caffeine (CF), a biologically active drug, has widely been documented in coastal waters, and whether its environmental concentrations do represent a threat for marine organisms is unclear. The present study aimed at assessing sub-lethal effects induced by a 7-day exposure to environmentally relevant concentrations of CF (5, 50 and 500ng/L) in the Mediterranean mussel, Mytilus galloprovincialis. CF in water and mussel tissues, and a battery of biomarkers, including lysosomal parameters of general stress, oxidative stress responses and endpoints of neurological and genetic damages, were evaluated and tested for significance vs controls (pemerging contaminants in marine invertebrates. Copyright © 2016 Elsevier B.V. All rights reserved.

Environmental concentrations of irgarol, diuron and S-metolachlor induce deleterious effects on gametes and embryos of the Pacific oyster, Crassostrea gigas.

Science.gov (United States)

Mai, Huong; Morin, Bénédicte; Pardon, Patrick; Gonzalez, Patrice; Budzinski, Hélène; Cachot, Jérôme

2013-08-01

Irgarol and diuron are the most representative "organic booster biocides" that replace organotin compounds in antifouling paints, and metolachlor is one of the most extensively used chloroacetamide herbicides in agriculture. The toxicity of S-metolachlor, irgarol and diuron was evaluated in Pacific oyster (Crassostrea gigas) gametes or embryos exposed to concentrations of pesticides ranging from 0.1× to 1000×, with 1× corresponding to environmental concentrations of the three studied pesticides in Arcachon Bay (France). Exposures were performed on (1) spermatozoa alone (2) oocytes alone and (3) both spermatozoa and oocytes, and adverse effects on fertilization success and offspring development were recorded. The results showed that the fertilizing capacity of spermatozoa was significantly affected after gamete exposure to pesticide concentrations as low as 1× of irgarol and diuron and 10× of metolachlor. The offspring obtained from pesticide-exposed spermatozoa displayed a dose-dependent increase in developmental abnormalities. In contrast, treating oocytes with pesticide concentrations up to 10× did not alter fertilization rate and offspring quality. However, a significant decline in fertilization success and increase in abnormal D-larvae prevalence were observed at higher concentrations 10× (0.1 μg L(-1)) for S-metolachlor and 100× for irgarol (1.0 μg L(-1)) and diuron (4.0 μg L(-1)). Irgarol, diuron and S-metolachlor also induced a dose-dependent increase in abnormal D-larvae prevalence when freshly fertilized embryos were treated with pesticide concentrations as low as concentration of 1× (0.01 μg L(-1) for irgarol or S-metolachlor, and 0.04 μg L(-1) for diuron). The two bioassays on C. gigas spermatozoa and embryos displayed similar sensitivities to the studied pesticides while oocytes were less sensitive. Diuron, irgarol and S-metolachlor induced spermiotoxicity and embryotoxicity at environmentally relevant concentrations and therefore might be

Concentrator Photovoltaics

CERN Document Server

Luque, Antonio L

2007-01-01

Photovoltaic solar-energy conversion is one of the most promising technologies for generating renewable energy, and conversion of concentrated sunlight can lead to reduced cost for solar electricity. In fact, photovoltaic conversion of concentrated sunlight insures an efficient and cost-effective sustainable power resource. This book gives an overview of all components, e.g. cells, concentrators, modules and systems, for systems of concentrator photovoltaics. The authors report on significant results related to design, technology, and applications, and also cover the fundamental physics and market considerations. Specific contributions include: theory and practice of sunlight concentrators; an overview of concentrator PV activities; a description of concentrator solar cells; design and technology of modules and systems; manufacturing aspects; and a market study.

Generation of Platelet Microparticles after Cryopreservation of Apheresis Platelet Concentrates Contributes to Hemostatic Activity

Directory of Open Access Journals (Sweden)

İbrahim Eker

2017-03-01

Full Text Available Objective: In the last decade, substantial evidence has accumulated about the use of cryopreserved platelet concentrates, especially in trauma. However, little reference has been made in these studies to the morphological and functional changes of platelets. Recently platelets have been shown to be activated by cryopreservation processes and to undergo procoagulant membrane changes resulting in the generation of platelet-derived microparticles (PMPs, platelet degranulation, and release of platelet-derived growth factors (PDGFs. We assessed the viabilities and the PMP and PDGF levels of cryopreserved platelets, and their relation with thrombin generation. Materials and Methods: Apheresis platelet concentrates (APCs from 20 donors were stored for 1 day and cryopreserved with 6% dimethyl sulfoxide. Cryopreserved APCs were kept at -80 °C for 1 day. Thawed APCs (100 mL were diluted with 20 mL of autologous plasma and specimens were analyzed for viabilities and PMPs by flow cytometry, for thrombin generation by calibrated automated thrombogram, and for PDGFs by enzyme-linked immunosorbent assay testing. Results: The mean PMP and PDGF levels in freeze-thawed APCs were significantly higher (2763±399.4/μL vs. 319.9±80.5/μL, p<0.001 and 550.9±73.6 pg/mL vs. 96.5±49 pg/mL, p<0.001, respectively, but the viability rates were significantly lower (68.2±13.7% vs. 94±7.5%, p<0.001 than those of fresh APCs. The mean endogenous thrombin potential (ETP of freeze-thawed APCs was significantly higher than that of the fresh APCs (3406.1±430.4 nM.min vs. 2757.6±485.7 nM.min, p<0.001. Moreover, there was a significant positive poor correlation between ETP levels and PMP levels (r=0.192, p=0.014. Conclusion: Our results showed that, after cryopreservation, while levels of PMPs were increasing, significantly higher and earlier thrombin formation was occurring in the samples analyzed despite the significant decrease in viability. Considering the damage caused

Aspects of nitrogen dioxide toxicity in environmental urban concentrations in human nasal epithelium

International Nuclear Information System (INIS)

Koehler, C.; Ginzkey, C.; Friehs, G.; Hackenberg, S.; Froelich, K.; Scherzed, A.; Burghartz, M.; Kessler, M.; Kleinsasser, N.

2010-01-01

Cytotoxicity and genotoxicity of nitrogen dioxide (NO 2 ) as part of urban exhaust pollution are widely discussed as potential hazards to human health. This study focuses on toxic effects of NO 2 in realistic environmental concentrations with respect to the current limit values in a human target tissue of volatile xenobiotics, the epithelium of the upper aerodigestive tract. Nasal epithelial cells of 10 patients were cultured as an air-liquid interface and exposed to 0.01 ppm NO 2 , 0.1 ppm NO 2 , 1 ppm NO 2 , 10 ppm NO 2 and synthetic air for half an hour. After exposure, genotoxicity was evaluated by the alkaline single-cell microgel electophoresis (Comet) assay and by induction of micronuclei in the micronucleus test. Depression of proliferation and cytotoxic effects were determined using the micronucleus assay and trypan blue exclusion assay, respectively. The experiments revealed genotoxic effects by DNA fragmentation starting at 0.01 ppm NO 2 in the Comet assay, but no micronucleus inductions, no changes in proliferation, no signs of necrosis or apoptosis in the micronucleus assay, nor did the trypan blue exclusion assay show any changes in viability. The present data reveal a possible genotoxicity of NO 2 in urban concentrations in a screening test. However, permanent DNA damage as indicated by the induction of micronuclei was not observed. Further research should elucidate the effects of prolonged exposure.

Niagara Falls Storage Site environmental report for calendar year 1992, 1397 Pletcher Road, Lewiston, New York

International Nuclear Information System (INIS)

1993-05-01

This report describes the environmental surveillance program at the Niagara Falls Storage Site (NFSS) and provides the results for 1992. From 1944 to the present, the primary use of NFSS has been storage of radioactive residues produced as a by-product of uranium production. All onsite areas of residual radioactivity above guidelines have been remediated. Materials generated during remediation are stored onsite in the 4-ha (10-acre) waste containment structure (WCS). The WCS is a clay-lined, clay-capped, and grass-covered storage pile. The environmental surveillance program at NFSS includes sampling networks for radon concentrations in air; external gamma radiation exposure; and total uranium and radium-226 concentrations in surface water, sediments, and groundwater. Several chemical parameters, including seven metals, are also routinely measured in groundwater. This surveillance program assists in fulfilling the DOE policy of measuring and monitoring effluents from DOE activities and calculating hypothetical doses. Monitoring results are compared with applicable Environmental Protection Agency (EPA) and New York State Department of Environmental Conservation (NYSDEC) standards, DOE derived concentration guides (DCGs), dose limits, and other DOE requirements. Results of environmental monitoring during 1992 indicate that levels of the parameters measured were in compliance with all but one requirement: Concentrations of iron and manganese in groundwater were above NYSDEC groundwater quality standards. However, these elements occur naturally in the soils and groundwater associated with this region. In 1992 there were no environmental occurrences or reportable quantity releases

Prediction of toxic metals concentration using artificial intelligence techniques

Science.gov (United States)

Gholami, R.; Kamkar-Rouhani, A.; Doulati Ardejani, F.; Maleki, Sh.

2011-12-01

Groundwater and soil pollution are noted to be the worst environmental problem related to the mining industry because of the pyrite oxidation, and hence acid mine drainage generation, release and transport of the toxic metals. The aim of this paper is to predict the concentration of Ni and Fe using a robust algorithm named support vector machine (SVM). Comparison of the obtained results of SVM with those of the back-propagation neural network (BPNN) indicates that the SVM can be regarded as a proper algorithm for the prediction of toxic metals concentration due to its relative high correlation coefficient and the associated running time. As a matter of fact, the SVM method has provided a better prediction of the toxic metals Fe and Ni and resulted the running time faster compared with that of the BPNN.

Compact neutron generators for environmental recovery applications

International Nuclear Information System (INIS)

Leung, K. N.; Firestone, R. B.; Lou, T. P.; Reijonen, J.; Vujic, J. Lj.

2002-01-01

New generations of compact neutron sources are being developed at the Lawrence Berkeley National Laboratory (LBNL). The D-D or D-T neutron generators can be used to perform precise elemental analysis by Prompt Gamma-Ray Activation Analysis (PGAA) in place of a nuclear reactor. The neutron generators will be composed of an ion source, from which a 1.5 A deuterium beam will be extracted and accelerated to about 150 keV onto a target loaded with deuterium. Based on the D-D nuclear reaction, the neutron generator will yield approximately 10 12 n/s (10 14 n/s for D-T reaction). With this neutron output, thermal and cold neutron fluxes of 10 7 n/s cm 2 and 6 x 10 6 n/s cm 2 have been estimated using neutron moderators designed by the neutron transport simulation code MCNP. (author)

Distributed Generation of Electricity and its Environmental Impacts

Science.gov (United States)

Distributed generation refers to technologies that generate electricity at or near where it will be used. Learn about how distributed energy generation can support the delivery of clean, reliable power to additional customers.

Tritium concentrations in environmental water and food samples collected around the vicinity of the PNPP-1

International Nuclear Information System (INIS)

Garcia, T.Y.; Enriquez, S.O.; Duran, E.B.

1986-01-01

The natural radioactivity levels of tritium in environmental samples collected around the vicinity and more distant environment of the first Philippine Nuclear Power Plant (PNPP-1) in Bataan were assessed. The samples analyzed consisted of water samples such as seawater, freshwater, drinking water, groundwater and rainwater; and food samples such as cereals, vegetables, fruits; meat, milk fish and crustaceans. Tritium concentrations in water samples were determined by distillation and liquid scintillation counting techniques. The food samples were analyzed for tissue-free water tritium by the freezing-drying method followed by liquid scintillation counting techniques. (Auth.) 13 refs

High concentrations of cadmium, cerium and lanthanum in indoor air due to environmental tobacco smoke

International Nuclear Information System (INIS)

Böhlandt, Antje; Schierl, Rudolf; Diemer, Juergen; Koch, Christoph; Bolte, Gabriele; Kiranoglu, Mandy; Fromme, Hermann; Nowak, Dennis

2012-01-01

Background: Environmental tobacco smoke (ETS) is one of the most important sources for indoor air pollution and a substantial threat to human health, but data on the concentrations of the trace metals cerium (Ce) and lanthanum (La) in context with ETS exposure are scarce. Therefore the aim of our study was to quantify Ce and La concentrations in indoor air with high ETS load. Methods: In two subsequent investigations Ce, La and cadmium (Cd) in 3 smokers' (11 samples) and 7 non-smokers' (28 samples) households as well as in 28 hospitality venues in Southern Germany were analysed. Active sampling of indoor air was conducted continuously for seven days in every season in the smokers' and non-smokers' residences, and for 4 h during the main visiting hours in the hospitality venues (restaurants, pubs, and discotheques). Results: In terms of residences median levels of Cd were 0.1 ng/m 3 for non-smokers' and 0.8 ng/m 3 for smokers' households. Median concentrations of Ce were 0.4 ng/m 3 and 9.6 ng/m 3 , and median concentrations of La were 0.2 ng/m 3 and 5.9 ng/m 3 for non-smokers' and for smokers' households, respectively. In the different types of hospitality venues median levels ranged from 2.6 to 9.7 ng/m 3 for Cd, from 18.5 to 50.0 ng/m 3 for Ce and from 10.6 to 23.0 ng/m 3 for La with highest median levels in discotheques. Conclusions: The high concentrations of Ce and La found in ETS enriched indoor air of smokers' households and hospitality venues are an important finding as Ce and La are associated with adverse health effects and data on this issue are scarce. Further research on their toxicological, human and public health consequences is urgently required. - Highlights: ► We quantified cer, lanthanum and cadmium concentrations in indoor air. ► Cer and lanthanum concentrations were high in tobacco smoke enriched locations. ► Both elements can be considered as good markers for indoor air quality.

Observations of concentrated generator regions in the nightside magnetosphere by Cluster/FAST conjunctions