The spectrum of progressive derecho formation environments

Science.gov (United States)

Guastini, Corey T.

Progressive derechos are severe mesoscale convective systems that often form east of the Rocky Mountains during the warm season (May--August) and cause, by definition, straight-line wind damage along paths upwards of 400 km long. This study develops a subjective, seven-category classification scheme that spans the spectrum of progressive derecho formation environments from those dominated by robust upper-level ridges to those characterized by vigorous upper-level troughs. A climatology of 256 progressive derecho events is created for 1996--2013 and is categorized according to the developed classification scheme. Derecho initiation-relative composites are constructed for each of the seven groups using 0.5° Climate Forecast System Reanalysis data to document the environmental characteristics unique to each group as well as those shared among them. Finally, two in-depth case studies and five cursory case studies provide examples of the seven categories and reveal important nuances in mesoscale dynamic and thermodynamic structure inherent to all derecho cases. Results of the climatology show progressive derecho activity increases from 1 May through 1 July before decreasing again through the end of August and follows a northward trend in latitude from 1 May through 1 August before shifting slightly southward through the end of the warm season. Upslope flow in the vicinity of the Rocky Mountains initiates 28 percent of progressive derechos, upper-level troughs initiate 20 percent, 47 percent form in benign synoptic environments, and 5 percent are unclassifiable. Composite results show all progressive derecho initiation environments are marked by a long axis of instability caused by the overlap of high atmospheric moisture content and steep midlevel lapse rates, but the relative positions and strengths of upper-level troughs and ridges are crucial in determining how the instability axis develops and what its orientation in space will be. Case studies reveal instability

International environment, enterprise environment and energy environment giving different look

Energy Technology Data Exchange (ETDEWEB)

Kubo, Shunsuke

1987-04-01

0he international environment, enterprise environment and energy environment surrounding Japan are changing their looks. In such situation, what Japan should do for the development of the world was discussed. Internationally, in the Western Pacific economical block including Japan and Asian NICs, Japan promotes the international exchange of materials, capital, technology, information and people, and creates various international public properties. Enterprisers should have global mind, and cope with the internationalization, technical innovation and information orientation which are in progress at present through international exchange, interindustrial exchange, industry-university-government exchange and so on. In the aspect of energy environment, Japan carries out the technical development of energy conservation, energy, creation and the exploration of energy resources, in this way, contributes to the stabilization of energy in the world. (3 figs, 1 tab)

Experimental Facilities Division/User Program Division technical progress report 1999-2000

International Nuclear Information System (INIS)

2001-01-01

In October 1999, the two divisions of the Advanced Photon Source (APS), the Accelerator Systems Division (ASD) and the Experimental Facilities Division (XFD), were reorganized into four divisions (see high-level APS organizational chart, Fig. 1.1). In addition to ASD and XFD, two new divisions were created, the APS Operations Division (AOD), to oversee APS operations, and the User Program Division (UPD), to serve the APS user community by developing and maintaining the highest quality user technical and administration support. Previous XFD Progress Reports (ANL/APS/TB-30 and ANL/APS/TB-34) covered a much broader base, including APS user administrative support and what was previously XFD operations (front ends, interlocks, etc.) This Progress Report summarizes the main scientific and technical activities of XFD, and the technical support, research and development (R and D) activities of UPD from October 1998 through November 2000. The report is divided into four major sections, (1) Introduction, (2) SRI-CAT Beamlines, Technical Developments, and Scientific Applications, (3) User Technical Support, and (4) Major Plans for the Future. Sections 2 and 3 describe the technical activities and research accomplishments of the XFD and UPD personnel in supporting the synchrotron radiation instrumentation (SRI) collaborative access team (CAT) and the general APS user community. Also included in this report is a comprehensive list of publications (Appendix 1) and presentations (Appendix 2) by XFD and UPD staff during the time period covered by this report. The organization of section 2, SRI CAT Beamlines, Technical Developments, and Scientific Applications has been made along scientific techniques/disciplines and not ''geographical'' boundaries of the sectors in which the work was performed. Therefore items under the subsection X-ray Imaging and Microfocusing could have been (and were) performed on several different beamlines by staff in different divisions. The management of

Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Introductory part and summaries

International Nuclear Information System (INIS)

1999-11-01

Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the geological disposal concept for high-level radioactive wastes (HLW) in Japan and comprises seven chapters. Chapter I briefly describes the importance of HLW management in promoting nuclear energy utilization. According to the long-term program, the HLW separated from spent fuels at reprocessing plants is to be vitrified and stored for a period of 30 to 50 years to allow cooling, then be disposed of in a deep geological formation. Chapter II mainly explains the concepts of geological disposal in Japan. Chapters III to V are devoted to discussions on three important technical elements (the geological environment of Japan, engineering technology and safety assessment of the geological disposal system) which are necessary for reliable realization of the geological disposal concept. Chapter VI demonstrates the technical ground for site selection and for setup of safety standards of the disposal. Chapter VII summarizes together with plans for future research and development. (Ohno, S.)

The Natural Hospital Environment: a Socio-Technical-Material perspective.

Science.gov (United States)

Fernando, Juanita; Dawson, Linda

2014-02-01

This paper introduces two concepts into analyses of information security and hospital-based information systems-- a Socio-Technical-Material theoretical framework and the Natural Hospital Environment. The research is grounded in a review of pertinent literature with previously published Australian (Victoria) case study data to analyse the way clinicians work with privacy and security in their work. The analysis was sorted into thematic categories, providing the basis for the Natural Hospital Environment and Socio-Technical-Material framework theories discussed here. Natural Hospital Environments feature inadequate yet pervasive computer use, aural privacy shortcomings, shared workspace, meagre budgets, complex regulation that hinders training outcomes and out-dated infrastructure and are highly interruptive. Working collaboratively in many cases, participants found ways to avoid or misuse security tools, such as passwords or screensavers for patient care. Workgroup infrastructure was old, architecturally limited, haphazard in some instances, and was less useful than paper handover sheets to ensure the quality of patient care outcomes. Despite valiant efforts by some participants, they were unable to control factors influencing the privacy of patient health information in public hospital settings. Future improvements to hospital-based organisational frameworks for e-health can only be made when there is an improved understanding of the Socio-Technical-Material theoretical framework and Natural Hospital Environment contexts. Aspects within control of clinicians and administrators can be addressed directly although some others are beyond their control. An understanding and acknowledgement of these issues will benefit the management and planning of improved and secure hospital settings. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Sustainable Mining Environment: Technical Review of Post-mining Plans

Directory of Open Access Journals (Sweden)

Restu Juniah

2017-12-01

Full Text Available The mining industry exists because humans need mining commodities to meet their daily needs such as motor vehicles, mobile phones, electronic equipment and others. Mining commodities as mentioned in Government Regulation No. 23 of 2010 on Implementation of Mineral and Coal Mining Business Activities are radioactive minerals, metal minerals, nonmetallic minerals, rocks and coal. Mineral and coal mining is conducted to obtain the mining commodities through production operations. Mining and coal mining companies have an obligation to ensure that the mining environment in particular after the post production operation or post mining continues. The survey research aims to examine technically the post-mining plan in coal mining of PT Samantaka Batubara in Indragiri Hulu Regency of Riau Province towards the sustainability of the mining environment. The results indicate that the post-mining plan of PT Samantaka Batubara has met the technical aspects required in post mining planning for a sustainable mining environment. Postponement of post-mining land of PT Samantaka Batubara for garden and forest zone. The results of this study are expected to be useful and can be used by stakeholders, academics, researchers, practitioners and associations of mining, and the environment.

The effects of environmental regulation and technical progress on CO2 Kuznets curve: An evidence from China

International Nuclear Information System (INIS)

Yin, Jianhua; Zheng, Mingzheng; Chen, Jian

2015-01-01

Based on environmental Kuznets curve theory, a panel data model which takes environmental regulation and technical progress as its moderating factors was developed to analyse the institutional and technical factors that affect the path of low-carbon economic development. The results indicated that there was a CO 2 emission Kuznets curve seen in China. Environmental regulation had a significant moderating effect on the curve, and the inflection of CO 2 emissions could come substantially earlier under stricter environmental regulation. Meanwhile, the impact of technical progress on the low-carbon economic development path had a longer hysteresis effect but restrained CO 2 emission during its increasing stage and accelerated its downward trend during the decreasing stage which was conducive to emission reduction. Strict environmental regulation could force the high-carbon emitting industries to transfer from the eastern regions to the central or the western regions of China, which would make the CO 2 Kuznets curve higher in its increasing stage and lower in its decreasing stage than that under looser regulation. Furthermore, energy efficiency, energy structure, and industrial structure exerted a significant direct impact on CO 2 emissions; we should consider the above factors as essential in the quest for low-carbon economic development. - Highlights: • Estimate moderating effect of environmental regulation and technical progress on EKC. • There was a CO 2 emission Kuznets curve in effect in China. • Environmental regulation presents significant moderating effect on EKC. • Technical progress moderates the relationship between income and CO 2 emissions

ERIP invention 637. Technical progress report 2nd quarter, April 1997--June 1997

Energy Technology Data Exchange (ETDEWEB)

Thacker, G.W.

1997-07-22

This technical report describes progress in the development of the Pegasus plow, a stalk and root embedding apparatus. Prototype testing is reported, and includes the addition of precision tillage. Disease data, organic matter, and nitrogen levels results are very briefly described. Progress in marketing is also reported. Current marketing issues include test use by cotton and wheat growers, establishment of dealer relationships, incorporation of design modifications, expansion of marketing activities, and expansion of loan and lease program.

Seventh ITER technical meeting on safety and environment

International Nuclear Information System (INIS)

Raeder, J.; Gordon, C.

2000-01-01

From February 15 to 18, 2000, the Seventy Technical Meeting on Safety and Environment was held at the Garching Joint Work Site which now hosts the Safety, Environment and Health Group of the ITER Joint Central Team. At this meeting, safety experts from the Home Teams worked with the SEHG members on reviews and agreements on the contents of GSSR and on the tasks and the schedule for the production of GSSR as well as the design information to be used and for the analyses to be done

Eighth ITER technical meeting on safety and environment

International Nuclear Information System (INIS)

Gordon, C.; Raeder, J.

2000-01-01

From November 27 to 30, 2000 the Eighth ITER Technical Meeting on Safety and Environment was held by the ITER Joint Central Team (JCT) at the Garching Joint Work Site, which also hosts the ITER Safety, Environment and Health Group (SEHG). At this meeting, safety experts from the Home Teams (HT) worked together with the SEHG members towards the following main objectives: review of Generic Site Safety Report (GSSR) results and drafts; review of the Plant Design Description (PDD) summary of safety; update on the status of the R and D tasks contributing to GSSR

Cassini RTG Program. Monthly technical progress report, 27 November--31 December 1995

International Nuclear Information System (INIS)

1996-01-01

This monthly technical progress report provided information on the following tasks: spacecraft integration and liaison; engineering support; safety analysis; qualified unicouple fabrication; ETG fabrication, assembly, and test; ground support equipment (GSE); RTG shipping and launch support; designs, reviews, and mission applications; project management, quality assurance, and reliability, and contractor acquired government owned (CAGO) property acquisition

Impact of Environmental Regulation and Technical Progress on Industrial Carbon Productivity: An Approach Based on Proxy Measure

Directory of Open Access Journals (Sweden)

Huan Zhang

2016-08-01

Full Text Available This research aims to study the main influencing factors of China’s industrial carbon productivity by incorporating environmental regulation and technical progress into an econometric model. The paper focuses on data from 35 of China’s industrial sectors and covers the period from 2006 to 2014, in order to examine the impact of environmental regulation and technical progress on carbon productivity. Methods applied include panel fixed effect model, panel random effect model and two stage least squares with instrumental variables (IV-2SLS. The effect of environmental regulation and technical progress has industrial heterogeneity. The paper subdivides industrial sectors into capital and technology intensive, resource intensive and labor intensive sectors according to factor intensiveness. The estimation results of the subgroups have uncovered that for capital and technology intensive and resource intensive sectors, environmental regulation has a more significant impact than technical progress; while for labor intensive sectors, innovation more significantly influences carbon productivity. In addition, foreign direct investment (FDI and industrialization level facilitate improving carbon productivity for the full sample. By contrast, industrial structure inhibits the overall industrial carbon productivity. The industry-specific results indicate that for capital and technology intensive sectors, optimizing of the industrial structure can improve carbon productivity; for resource intensive sectors, FDI and energy consumption structure should be emphasized more; for labor intensive sectors, industrialization levels help enhance carbon productivity. Finally the industrial sector-specific policy suggestions are proposed.

Environment, safety and health progress assessment manual

International Nuclear Information System (INIS)

1992-12-01

On June 27, 1989, the Secretary of Energy announced a 10-Point Initiative to strengthen environment, safety, and health (ES ampersand H) programs, and waste management activities at DOE production, research, and testing facilities. One of the points involved conducting dent Tiger Team Assessments of DOE operating facilities. The Office of Special independent Projects (OSP), EH-5, in the Office of the Assistant Secretary for Environment, Safety and Health, EH-1, was assigned the responsibility to conduct the Tiger Team Assessments. Through June 1992, a total of 35 Tiger Team Assessments were completed. The Secretary directed that Corrective Action Plans be developed and implemented to address the concerns identified by the Tiger Teams. In March 1991, the Secretary approved a plan for assessments that are ''more focused, concentrating on ES ampersand H management, ES ampersand H corrective actions, self-assessment programs, and root-cause related issues.'' In July 1991, the Secretary approved the initiation of ES ampersand H Progress Assessments, as a followup to the Tiger Team Assessments, and in the continuing effort to institutionalize the self-assessment process and line management accountability in the ES ampersand H areas. This manual documents the processes to be used to perform the ES ampersand H Progress Assessments. It was developed based upon the lessons learned from Tiger Team Assessments, the two pilot Progress Assessments, and Progress Assessments that have been completed. The manual will be updated periodically to reflect lessons learned or changes in policy

Sixth ITER technical meeting on safety and environment

International Nuclear Information System (INIS)

Saji, G.; Baker, D.

1997-01-01

The article summarizes the topics of the Sixth Technical Meeting on Safety and Environment which was held to review the first draft of the Non-Site Specific Safety Report (NSSR-2) and the draft of the ITER Final Design Report Safety Assessment (FDR-Safety) during October 27 - November 4, 1997 at the ITER San Diego Joint Work Site

Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 3

International Nuclear Information System (INIS)

Ulm, Franz-Josef

2000-01-01

OAK-B135 Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 3(NOTE: Part II A item 1 indicates ''PAPER'', but a report is attached electronically)

Environment, safety and health progress assessment manual

International Nuclear Information System (INIS)

1992-12-01

On June 27, 1989, the Secretary of Energy announced a 1O-Point Initiative to strengthen environment,safety, and health (ES ampersand H) programs, and waste management activities at involved conducting DOE production, research, and testing facilities. One of the points independent Tiger Team Assessments of DOE operating facilities. The Office of Special Projects (OSP), EH-5, in the Office of the Assistant Secretary for Environment, Safety and Health, EH-1, was assigned the responsibility to conduct the Tiger Team Assessments. Through June 1992, a total of 35 Tiger Team Assessments were completed. The Secretary directed that Corrective Action Plans be developed and implemented to address the concerns identified by the Tiger Teams. In March 1991, the Secretary approved a plan for assessments that are ''more focused, concentrating on ES ampersand H management, ES ampersand H corrective actions, self-assessment programs, and root-cause related issues.'' In July 1991, the Secretary approved the initiation of ES ampersand H Progress Assessments, as a followup to the Tiger Team Assessments, and in the continuing effort to institutionalize the self-assessment process and line management accountability in the ES ampersand H areas. This volume contains appendices to the Environment, Safety and Health Progress Assessment Manual

Total Factor Productivity Growth, Technical Progress & Efficiency Change in Vietnam Coal Industry - Nonparametric Approach

Science.gov (United States)

Phuong, Vu Hung

2018-03-01

This research applies Data Envelopment Analysis (DEA) approach to analyze Total Factor Productivity (TFP) and efficiency changes in Vietnam coal mining industry from 2007 to 2013. The TFP of Vietnam coal mining companies decreased due to slow technological progress and unimproved efficiency. The decadence of technical efficiency in many enterprises proved that the coal mining industry has a large potential to increase productivity through technical efficiency improvement. Enhancing human resource training, technology and research & development investment could help the industry to improve efficiency and productivity in Vietnam coal mining industry.

Sludge Treatment Evaluation: 1992 Technical progress

International Nuclear Information System (INIS)

Silva, L.J.; Felmy, A.R.; Ding, E.R.

1993-01-01

This report documents Fiscal Year 1992 technical progress on the Sludge Treatment Evaluation Task, which is being conducted by Pacific Northwest Laboratory. The objective of this task is to develop a capability to predict the performance of pretreatment processes for mixed radioactive and hazardous waste stored at Hanford and other US Department of Energy (DOE) sites. Significant cost savings can be achieved if radionuclides and other undesirable constituents can be effectively separated from the bulk waste prior to final treatment and disposal. This work is initially focused on chemical equilibrium prediction of water washing and acid or base dissolution of Hanford single-shell tank (SST) sludges, but may also be applied to other steps in pretreatment processes or to other wastes. Although SST wastes contain many chemical species, there are relatively few constituents -- Na, Al, NO 3 , NO 2 , PO 4 , SO 4 , and F -- contained in the majority of the waste. These constituents comprise 86% and 74% of samples from B-110 and U-110 SSTS, respectively. The major radionuclides of interest (Cs, Sr, Tc, U) are present in the sludge in small molal quantities. For these constituents, and other important components that are present in small molal quantities, the specific ion-interaction terms used in the Pitzer or NRTL equations may be assumed to be zero for a first approximation. Model development can also be accelerated by considering only the acid or base conditions that apply for the key pretreatment steps. This significantly reduces the number of chemical species and chemical reactions that need to be considered. Therefore, significant progress can be made by developing all the specific ion interactions for a base model and an acid dissolution model

Sludge Treatment Evaluation: 1992 Technical progress

Energy Technology Data Exchange (ETDEWEB)

Silva, L J; Felmy, A R; Ding, E R

1993-01-01

This report documents Fiscal Year 1992 technical progress on the Sludge Treatment Evaluation Task, which is being conducted by Pacific Northwest Laboratory. The objective of this task is to develop a capability to predict the performance of pretreatment processes for mixed radioactive and hazardous waste stored at Hanford and other US Department of Energy (DOE) sites. Significant cost savings can be achieved if radionuclides and other undesirable constituents can be effectively separated from the bulk waste prior to final treatment and disposal. This work is initially focused on chemical equilibrium prediction of water washing and acid or base dissolution of Hanford single-shell tank (SST) sludges, but may also be applied to other steps in pretreatment processes or to other wastes. Although SST wastes contain many chemical species, there are relatively few constituents -- Na, Al, NO[sub 3], NO[sub 2], PO[sub 4], SO[sub 4], and F -- contained in the majority of the waste. These constituents comprise 86% and 74% of samples from B-110 and U-110 SSTS, respectively. The major radionuclides of interest (Cs, Sr, Tc, U) are present in the sludge in small molal quantities. For these constituents, and other important components that are present in small molal quantities, the specific ion-interaction terms used in the Pitzer or NRTL equations may be assumed to be zero for a first approximation. Model development can also be accelerated by considering only the acid or base conditions that apply for the key pretreatment steps. This significantly reduces the number of chemical species and chemical reactions that need to be considered. Therefore, significant progress can be made by developing all the specific ion interactions for a base model and an acid dissolution model.

Decontamination Systems Information and Research Program. Quarterly technical progress report, January 1--March 31, 1994

Energy Technology Data Exchange (ETDEWEB)

1994-05-01

West Virginia University (WVU) and the US DOE Morgantown Energy Technology Center (METC) entered into a Cooperative Agreement on August 29, 1992 entitled ``Decontamination Systems Information and Research Programs.`` Stipulated within the Agreement is the requirement that WVU submit to METC a series of Technical Progress Reports on a quarterly basis. This report comprises the first Quarterly Technical Progress Report for Year 2 of the Agreement. This report reflects the progress and/or efforts performed on the sixteen (16) technical projects encompassed by the Year 2 Agreement for the period of January 1 through March 31, 1994. In situ bioremediation of chlorinated organic solvents; Microbial enrichment for enhancing in-situ biodegradation of hazardous organic wastes; Treatment of volatile organic compounds (VOCs) using biofilters; Drain-enhanced soil flushing (DESF) for organic contaminants removal; Chemical destruction of chlorinated organic compounds; Remediation of hazardous sites with steam reforming; Soil decontamination with a packed flotation column; Use of granular activated carbon columns for the simultaneous removal of organics, heavy metals, and radionuclides; Monolayer and multilayer self-assembled polyion films for gas-phase chemical sensors; Compact mercuric iodide detector technology development; Evaluation of IR and mass spectrometric techniques for on-site monitoring of volatile organic compounds; A systematic database of the state of hazardous waste clean-up technologies; Dust control methods for insitu nuclear and hazardous waste handling; Winfield Lock and Dam remediation; and Socio-economic assessment of alternative environmental restoration technologies.

Environmental Research Division technical progress report, January 1984-December 1985

International Nuclear Information System (INIS)

1986-05-01

Technical progress in the various research and assessment activities of Argonne National Laboratory's Environmental Research Division is reported for the period 1984 to 1985. Textual, graphic, and tabular information is used to briefly summarize (in separate chapters) the work of the Division's Atmospheric Physics, Environmental Effects Research, Environmental Impacts, Fundamental Molecular Physics and Chemistry, and Waste Management Programs. Information on professional qualifications, awards, and outstanding professional activities of staff members, as well as lists of publications, oral presentations, special events organized, and participants in educational programs, are provided in appendices at the end of each chapter

Environmental Research Division technical progress report, January 1984-December 1985

Energy Technology Data Exchange (ETDEWEB)

1986-05-01

Technical progress in the various research and assessment activities of Argonne National Laboratory's Environmental Research Division is reported for the period 1984 to 1985. Textual, graphic, and tabular information is used to briefly summarize (in separate chapters) the work of the Division's Atmospheric Physics, Environmental Effects Research, Environmental Impacts, Fundamental Molecular Physics and Chemistry, and Waste Management Programs. Information on professional qualifications, awards, and outstanding professional activities of staff members, as well as lists of publications, oral presentations, special events organized, and participants in educational programs, are provided in appendices at the end of each chapter.

Urology technical and non-technical skills development: the emerging role of simulation.

Science.gov (United States)

Rashid, Prem; Gianduzzo, Troy R J

2016-04-01

To review the emerging role of technical and non-technical simulation in urological education and training. A review was conducted to examine the current role of simulation in urology training. A PUBMED search of the terms 'urology training', 'urology simulation' and 'urology education' revealed 11,504 titles. Three hundred and fifty-seven abstracts were identified as English language, peer reviewed papers pertaining to the role of simulation in urology and related topics. Key papers were used to explore themes. Some cross-referenced papers were also included. There is an ongoing need to ensure that training time is efficiently utilised while ensuring that optimal technical and non-technical skills are achieved. Changing working conditions and the need to minimise patient harm by inadvertent errors must be taken into account. Simulation models for specific technical aspects have been the mainstay of graduated step-wise low and high fidelity training. Whole scenario environments as well as non-technical aspects can be slowly incorporated into the curriculum. Doing so should also help define what have been challenging competencies to teach and evaluate. Dedicated time, resources and trainer up-skilling are important. Concurrent studies are needed to help evaluate the effectiveness of introducing step-wise simulation for technical and non-technical competencies. Simulation based learning remains the best avenue of progressing surgical education. Technical and non-technical simulation could be used in the selection process. There are good economic, logistic and safety reasons to pursue the process of ongoing development of simulation co-curricula. While the role of simulation is assured, its progress will depend on a structured program that takes advantage of what can be delivered via this medium. Overall, simulation can be developed further for urological training programs to encompass technical and non-technical skill development at all stages, including

Institutional effectiveness of REDD+ MRV: Countries progress in implementing technical guidelines and good governance requirements

NARCIS (Netherlands)

Ochieng, R.M.; Visseren-Hamakers, Ingrid; Arts, B.; Brockhaus, M.; Herold, M.

2016-01-01

The UNFCCC requires REDD+ countries wishing to receive results-based payments to measure, report and verify (MRV) REDD+ impacts; and outlines technical guidelines and good governance requirements for MRV. This article examines institutional effectiveness of REDD+ MRV by assessing countries’ progress

Index to Nuclear Safety: a technical progress review by chrology, permuted title, and author, Volume 11(1) through Volume 20(6)

Energy Technology Data Exchange (ETDEWEB)

Cottrell, W B; Passiakos, M

1980-06-01

This index to Nuclear Safety, a bimonthly technical progress review, covers articles published in Nuclear Safety, Volume II, No. 1 (January-February 1970), through Volume 20, No. 6 (November-December 1979). It is divided into three sections: a chronological list of articles (including abstracts) followed by a permuted-title (KWIC) index and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center (NSIC), covers all safety aspects of nuclear power reactors and associated facilities. Over 600 technical articles published in Nuclear Safety in the last ten years are listed in this index.

World bank and the environment. Progress report

International Nuclear Information System (INIS)

1991-01-01

The second annual report describes specific environmental strategies and environmental lending in the Bank's four operational regions: Africa; Asia; Europe, Middle East, and North Africa; and Latin America and the Caribbean. It details the Bank's progress in eight environmental categories: energy and the environment, pollution, urban environment, water resources management, forest and land management, social and cultural, environmental economics, and the global environment. One chapter is devoted exclusively to tropical forests, studying ways in which the Bank is dealing with deforestation as a part of the constant review of its forest policies. Suggestions are made for decreasing the degradation of tropical forests while meeting demands for forest products. This chapter reflects a shift in Bank emphasis from commercial ventures to conservation measures. The publication reports on other initiatives by the Bank during fiscal 1991, including the launching of the Global Environment Facility (GEF)--a pilot program to oversee reduction of global warming, preservation of biological diversity, protection of international waters, and prevention of ozone depletion

Nonequilibrium photochemical reactions induced by lasers. Technical progress report

International Nuclear Information System (INIS)

Steinfeld, J.I.

1978-04-01

Research has progressed in six principal subject areas of interest to DOE advanced (laser) isotope separation efforts. These are (1) Infrared double resonance spectroscopy of molecules excited by multiple infrared photon absorption, particularly SF 6 and vinyl chloride. (2) Infrared multiphoton excitation of metastable triplet-state molecules, e.g., biacetyl. (3) An Information Theory analysis of multiphoton excitation and collisional deactivation has been carried out. (4) The mechanism of infrared energy deposition and multiphoton-induced reactions in chlorinated ethylene derivatives; and RRKM (statistical) model accounts for all observed behavior of the system, and a deuterium-specific reaction pathway has been identified. (5) Diffusion-enhanced laser isotope separation in N 16 O/N 18 O. (6) A technical evaluation of laser-induced chemistry and isotope separation

Projects at the component development and integration facility. Quarterly technical progress report, April 1, 1994--June 30, 1994

International Nuclear Information System (INIS)

1994-01-01

This quarterly technical progress report presents progress on the projects at the Component Development and Integration Facility (CDIF) during the third quarter of FY94. The CDIF is a major Department of Energy test facility in Butte, Montana, operated by MSE, Inc. Projects in progress include: Biomass Remediation Project; Heavy Metal-Contaminated Soil Project; MHD Shutdown; Mine Waste Technology Pilot Program; Plasma Projects; Resource Recovery Project; and Spray Casting Project

Ninth ITER technical meeting on safety and environment

International Nuclear Information System (INIS)

Raeder, J.; Gordon, C.

2001-01-01

The ninth ITER Technical Meeting on safety and environment, the last in the course of the ITER Engineering Design Activities (EDA), was held at the ITER Garching Joint Work site, 8 to 10 May 2001. At this Meeting, safety experts from the House Teams worked together with the members of the Safety, Environment and Health Groups (SEHG) of the ITER Joint Central Team (JCT) in the following areas: finalization of the Generic Site Safety report (GSSR) which is considered to be the most important objective of the present work; summary of the safety related R and D work done by the Home Teams for ITER during EDA; review of verification and validation work done on computer codes being applied for Safety and Environment (S and E) analyses; outline of work considered necessary for improving the S and E database, quantifying uncertainties of the code results and preparing the adaptation of ITER to a specific site

The environment in France - Major trends 2014

International Nuclear Information System (INIS)

Joassard, Irenee; Bousseau, Brigitte; Kochert, Thomas; Garderet, Agnes; Baron, Anne; Bousseau, Brigitte; Yousfi, Sarah; Lambert, Mathilde; Flegeo, Isabelle; Chevallier, Florence

2015-01-01

What is the state of the environment? How is it changing? Thanks to monitoring and research, knowledge of the different environments has improved. Some monitoring indicators are positive thanks to technical progress, investment and the impetus created by regulations, incentive-led measures and behavioural change. The situation nonetheless remains a concern

Modeling the impacts of climate change and technical progress on the wheat yield in inland China: An autoregressive distributed lag approach.

Science.gov (United States)

Zhai, Shiyan; Song, Genxin; Qin, Yaochen; Ye, Xinyue; Lee, Jay

2017-01-01

This study aims to evaluate the impacts of climate change and technical progress on the wheat yield per unit area from 1970 to 2014 in Henan, the largest agricultural province in China, using an autoregressive distributed lag approach. The bounded F-test for cointegration among the model variables yielded evidence of a long-run relationship among climate change, technical progress, and the wheat yield per unit area. In the long run, agricultural machinery and fertilizer use both had significantly positive impacts on the per unit area wheat yield. A 1% increase in the aggregate quantity of fertilizer use increased the wheat yield by 0.19%. Additionally, a 1% increase in machine use increased the wheat yield by 0.21%. In contrast, precipitation during the wheat growth period (from emergence to maturity, consisting of the period from last October to June) led to a decrease in the wheat yield per unit area. In the short run, the coefficient of the aggregate quantity of fertilizer used was negative. Land size had a significantly positive impact on the per unit area wheat yield in the short run. There was no significant short-run or long-run impact of temperature on the wheat yield per unit area in Henan Province. The results of our analysis suggest that climate change had a weak impact on the wheat yield, while technical progress played an important role in increasing the wheat yield per unit area. The results of this study have implications for national and local agriculture policies under climate change. To design well-targeted agriculture adaptation policies for the future and to reduce the adverse effects of climate change on the wheat yield, climate change and technical progress factors should be considered simultaneously. In addition, adaptive measures associated with technical progress should be given more attention.

Modeling the impacts of climate change and technical progress on the wheat yield in inland China: An autoregressive distributed lag approach.

Directory of Open Access Journals (Sweden)

Shiyan Zhai

Full Text Available This study aims to evaluate the impacts of climate change and technical progress on the wheat yield per unit area from 1970 to 2014 in Henan, the largest agricultural province in China, using an autoregressive distributed lag approach. The bounded F-test for cointegration among the model variables yielded evidence of a long-run relationship among climate change, technical progress, and the wheat yield per unit area. In the long run, agricultural machinery and fertilizer use both had significantly positive impacts on the per unit area wheat yield. A 1% increase in the aggregate quantity of fertilizer use increased the wheat yield by 0.19%. Additionally, a 1% increase in machine use increased the wheat yield by 0.21%. In contrast, precipitation during the wheat growth period (from emergence to maturity, consisting of the period from last October to June led to a decrease in the wheat yield per unit area. In the short run, the coefficient of the aggregate quantity of fertilizer used was negative. Land size had a significantly positive impact on the per unit area wheat yield in the short run. There was no significant short-run or long-run impact of temperature on the wheat yield per unit area in Henan Province. The results of our analysis suggest that climate change had a weak impact on the wheat yield, while technical progress played an important role in increasing the wheat yield per unit area. The results of this study have implications for national and local agriculture policies under climate change. To design well-targeted agriculture adaptation policies for the future and to reduce the adverse effects of climate change on the wheat yield, climate change and technical progress factors should be considered simultaneously. In addition, adaptive measures associated with technical progress should be given more attention.

Technical progress and climatic change

International Nuclear Information System (INIS)

Ausubel, J.H.

1995-01-01

The global warming debate has neglected and thus underestimated the importance of technical change in considering reduction in greenhouse gases and adaptation to climate change. Relevant quantitative cases of long-run technical change during the past 100 years are presented in computing, communications, transport, energy, and agriculture. A noteworthy technological trajectory is that of decarbonization, or decreasing carbon intensity of primary energy. If human societies have not yet reached the end of the history of technology, the cost structure for mitigation and adaptation changes could be cheap. (Author)

Western Research Institute: Annual technical progress report, October 1987--September 1988

Energy Technology Data Exchange (ETDEWEB)

1988-12-01

This report describes the technical progress made by the Western Research Institute of the University of Wyoming Research Institute of the University of Wyoming Research Corporation on work performed for the period October 1, 1987 through September 30, 1988. This research involves five resource areas: oil shale, tar sand, underground coal gasification, advanced process technology, and advanced fuels research. Under the terms of the cooperative agreement, an annual project plan has been approved by DOE. The work reported herein reflects the implementation of the research in the plan and follows the structure used therein. 49 refs., 32 figs., 87 tabs.

Technical meeting on progress in managing, and limiting the consequences of events exceeding the design basis

International Nuclear Information System (INIS)

Fabian, H.

2004-01-01

The Technical Groups on 'Reactor Safety' and 'Thermodynamics and Fluid Dynamics' of the Kerntechnische Gesellschaft e.V. organized a joint technical meeting on 'Progress in Managing, and Limiting the Consequences of, Events Exceeding the Design Basis' at the FTU Training Center of the Karlsruhe Research Center. The topic chosen, the papers presented, the presenters, and the non-technical part of the program met with lively interest on the part of institutions in the nuclear field. These were the objectives of the technical meeting: - Establishing a forum for communicating relevant topics. - In-depth discussion of the main topic, i.e. the advanced development of reactor safety, research in the field, and its application, in twenty selected papers presented by speakers from different institutions. - Presentation of topical work in a nuclear technology institution, the Karlsruhe Research Center. (orig.) [de

Studies in theoretical high energy particle physics: Technical progress report [February 1987-February 1988

International Nuclear Information System (INIS)

Sukhatme, U.P.; Keung, Wai-Yee; Kovacs, E.

1988-02-01

This is a technical progress report for grant No. FG02-84ER40173 for the period February 1987 to February 1988. Our research on supersymmetric quantum mechanics has yielded many interesting results. In particular, a systematic approach to the tunneling problem in double well potentials has been developed. Higgs boson related physics at the high energy hadron colliders has been extensively studied

Environment, Safety and Health Progress Assessment of the Hanford Site

International Nuclear Information System (INIS)

1992-05-01

This report documents the result of the US Department of Energy (DOE) Environment, Safety and Health (ES ampersand H) Progress Assessment of the Hanford Site, in Richland, Washington. The assessment, which was conducted from May 11 through May 22, 1992, included a selective-review of the ES ampersand H management systems and programs of the responsible DOE Headquarters Program Offices the DOE Richland Field Office, and the site contractors. The ES ampersand H Progress Assessments are part of the Secretary of Energy's continuing effort to institutionalize line management accountability and the self-assessment process throughout DOE and its contractor organizations. The purpose of the Hanford Site ES ampersand H Progress Assessment is to provide the Secretary with an independent assessment of the adequacy and effectiveness of the DOE and contractor management structures, resources, and systems to address ES ampersand H problems and requirements. They are not intended to be comprehensive compliance assessments of ES ampersand H activities. The point of reference for assessing programs at the Hanford Site was, for the most part, the Tiger Team Assessment of the Hanford Site, which was conducted from May 21 through July 18, 1990. A summary of issues and progress in the areas of environment, safety and health, and management is included

[Personal emergency call system based on human vital and system technical parameters in a Smart Home environment].

Science.gov (United States)

Hampicke, M; Schadow, B; Rossdeutscher, W; Fellbaum, K; Boenick, U

2002-11-01

Progress in microtechnology and radio transmission technology has enabled the development of highly reliable emergency-call systems. The present article describes systems that have been specially designed to improve the safety and independence of handicapped and elderly persons living at home. For such persons immediate help in an emergency situation is of crucial importance. The technical state of the art of emergency-call systems specially developed for use by the elderly, is briefly discussed, in particular the well-known radio emergency-call button, with the aid of which an alarm can be activated manually. This system, however, does not offer adequate safety in all emergency situations. Alternative or complementary systems designed to automatically trigger an alarm on the basis of the recording and evaluation of so-called vital parameters, are therefore proposed. In addition, in a smart-home environment with networked devices, further parameters--so-called environment parameters can be used. It is found that the identification of an emergency situation becomes more reliable as the number of parameters employed increases.

Rhone-Poulenc claims progress for environment program

International Nuclear Information System (INIS)

Back, R.

1993-01-01

Rhone-Poulenc (RP; Paris) made further progress last year in its pollution-reducing efforts, under the group's worldwide three-year Environment Plan (1992--1994). The company's water index improved by 15% from 1991 and by 22% from 1990 -- slightly ahead of target. The air index improved 9% from 1991 and 15% from 1990. open-quotes Progress regarding atmospheric emissions is significant, but we wish to go further in order to reach our medium-term objectives,close quotes says RP vice-chairman Jean-Marc Bruel. About 47% of the company's capital spending in 1992 was devoted to these emissions. The solid waste index remained static, with an improvement of 1% compared with an 18% advance in 1991. The startup of incineration units in 1993 will help correct this situation. Bruel reiterates the group's established goal of a 50% reduction in all effluent and solid waste by 1995, and 65% by 2000, using 1990 as the base year for its environment index. He says the indices have been adopted by the French chemical industry association -- Union des Industries Chimiques -- and the U.K.'s Chemical Industries Association. RP's environment-related expenditures in 1992 amounted to F1.8 billion ($330 million), of which F1.2 billion was for operating expenses and the remainder for new investments. Expenditures in France were F594 million and F479 million, respectively; the US, F381 million and F122 million; and Brazil F64 million and F14 million. Spending is forecast to be at a similar level in 1993. Environmental research, with spending of F5.8 billion in 1992, is integrated into all the group's research programs

The role of technical progress in the process of recalculating oil reserves; Le role du progres technique dans le processus de renouvellement des reserves petrolieres

Energy Technology Data Exchange (ETDEWEB)

Boulard, J.N. [Total/Fina/Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France)

1999-08-01

Contrary to the concept of resources (which is essentially a geological one), the notion of reserves designates the quantities that are technically and economically recoverable. Beyond the production-related effect, the reserves therefore evolve over time in accordance with numerous technical and economic parameters. Among these parameters, it can be seen that technical progress plays a considerable role throughout the process of converting resources into reserves, including progress in the identification, accessibility and processing of the resources, and improvements in economic viability. After having tackled the problem of measuring the 'technical progress effects' and citing examples, we demonstrate that the evolution in oil reserves is subject to three types of impact. These are a quantitative impact by significantly improving the recovery rates or making it possible to identify hitherto undetectable oil fields, a qualitative impact by widening the resource base thanks to the adoption of new categories of oil (in particular the so-called 'unconventional' oils) and by carrying out the gradual substitution between these resources of differing qualities. There is also a dynamic impact, through the acceleration of resource availability. Through these three approaches, technical progress makes makes it possible to ensure continuity in oil supply and contributes significantly to the recalculation of reserves. It therefore acts as a compensating factor, counterbalancing the progressive depletion of resources. (author)

The world bank and the environment. Progress report

International Nuclear Information System (INIS)

1991-01-01

The second annual report describes specific environmental strategies and environmental lending in the Bank's four operational regions: Africa; Asia; Europe, Middle East, and North Africa; and Latin America and the Caribbean. It details the Bank's progress in eight environmental categories: energy and the environment, pollution, urban environment, water resources management, forest and land management, social and cultural, environmental economics, and the global environment. One chapter is devoted exclusively to tropical forests, studying ways in which the Bank is dealing with deforestation as a part of the constant review of its forest policies. Suggestions are made for decreasing the degradation of tropical forests while meeting demands for forest products. This chapter reflects a shift in Bank emphasis from commercial ventures to conservation measures. The publication reports on other initiatives by the Bank during fiscal 1991, including the launching of the Global Environment Facility (GEF)--a pilot program to oversee reduction of global warming, preservation of biological diversity, protection of international waters, and prevention of ozone depletion

The Relationship Between Technical And Nontechnical Skills Within A Simulation-Based Ureteroscopy Training Environment.

Science.gov (United States)

Brunckhorst, Oliver; Shahid, Shahab; Aydin, Abdullatif; Khan, Shahid; McIlhenny, Craig; Brewin, James; Sahai, Arun; Bello, Fernando; Kneebone, Roger; Shamim Khan, Muhammad; Dasgupta, Prokar; Ahmed, Kamran

2015-01-01

Little integration of technical and nontechnical skills (e.g., situational awareness, communication, decision making, teamwork, and leadership) teaching exists within surgery. We therefore aimed to (1) evaluate the relationship between these 2 skill sets within a simulation-based environment and (2) assess if certain nontechnical skill components are of particular relevance to technical performance. A prospective analysis of data acquired from a comparative study of simulation vs nonsimulation training was conducted. Half of the participants underwent training of technical and nontechnical skills within ureteroscopy, with the remaining half undergoing no training. All were assessed within a full immersion environment against both technical (time to completion, Objective Structured Assessment of Technical Skills, and task-specific checklist scores) and nontechnical parameters (Nontechnical Skills for Surgeons [NOTSS] rating scale). The data of whole and individual cohorts were analyzed using Pearson correlation coefficient. The trial took place within the Simulation and Interactive Learning Centre at Guy's Hospital, London, UK. In total, 32 novice participants with no prior practical ureteroscopy experience were included within the data analysis. A correlation was found within all outcome measures analyzed. For the whole cohort, a strong negative correlation was found between time to completion and NOTSS scores (r = -0.75, p Technical Skills (r = 0.89, p technical skill parameters, regardless of training. A strong correlation between technical and nontechnical performance exists, which was demonstrated to be irrespective of training received. This may suggest an inherent link between skill sets. Furthermore, all nontechnical skill sets are important in technical performance. This supports the notion that both of these skills should be trained and assessed together within 1 curriculum. Copyright © 2015 Association of Program Directors in Surgery. Published by

[Research progress and development trend of quantitative assessment techniques for urban thermal environment.

Science.gov (United States)

Sun, Tie Gang; Xiao, Rong Bo; Cai, Yun Nan; Wang, Yao Wu; Wu, Chang Guang

2016-08-01

Quantitative assessment of urban thermal environment has become a focus for urban climate and environmental science since the concept of urban heat island has been proposed. With the continual development of space information and computer simulation technology, substantial progresses have been made on quantitative assessment techniques and methods of urban thermal environment. The quantitative assessment techniques have been developed to dynamics simulation and forecast of thermal environment at various scales based on statistical analysis of thermal environment on urban-scale using the historical data of weather stations. This study reviewed the development progress of ground meteorological observation, thermal infrared remote sensing and numerical simulation. Moreover, the potential advantages and disadvantages, applicability and the development trends of these techniques were also summarized, aiming to add fundamental knowledge of understanding the urban thermal environment assessment and optimization.

Surgical resident technical skill self-evaluation: increased precision with training progression.

Science.gov (United States)

Quick, Jacob A; Kudav, Vishal; Doty, Jennifer; Crane, Megan; Bukoski, Alex D; Bennett, Bethany J; Barnes, Stephen L

2017-10-01

Surgical resident ability to accurately evaluate one's own skill level is an important part of educational growth. We aimed to determine if differences exist between self and observer technical skill evaluation of surgical residents performing a single procedure. We prospectively enrolled 14 categorical general surgery residents (six post-graduate year [PGY] 1-2, three PGY 3, and five PGY 4-5). Over a 6-month period, following each laparoscopic cholecystectomy, residents and seven faculty each completed the Objective Structured Assessment of Technical Skills (OSATS). Spearman's coefficient was calculated for three groups: senior (PGY 4-5), PGY3, and junior (PGY 1-2). Rho (ρ) values greater than 0.8 were considered well correlated. Of the 125 paired assessments (resident-faculty each evaluating the same case), 58 were completed for senior residents, 54 for PGY3 residents, and 13 for junior residents. Using the mean from all OSATS categories, trainee self-evaluations correlated well to faculty (senior ρ 0.97, PGY3 ρ 0.9, junior ρ 0.9). When specific OSATS categories were analyzed, junior residents exhibited poor correlation in categories of respect for tissue (ρ -0.5), instrument handling (ρ 0.71), operative flow (ρ 0.41), use of assistants (ρ 0.05), procedural knowledge (ρ 0.32), and overall comfort with the procedure (ρ 0.73). PGY3 residents lacked correlation in two OSATS categories, operative flow (ρ 0.7) and procedural knowledge (ρ 0.2). Senior resident self-evaluations exhibited strong correlations to observers in all areas. Surgical residents improve technical skill self-awareness with progressive training. Less-experienced trainees have a tendency to over-or-underestimate technical skill. Copyright © 2017 Elsevier Inc. All rights reserved.

Productivity Change, Technical Progress, and Relative Efficiency Change in the Public Accounting Industry

OpenAIRE

Rajiv D. Banker; Hsihui Chang; Ram Natarajan

2005-01-01

We present evidence on components of productivity change in the public accounting industry toward the end of the 20th century. Using revenue and human resource data from 64 of the 100 largest public accounting firms in the United States for the 1995--1999 period, we analyze productivity change, technical progress, and relative efficiency change over time. The average public accounting firm experienced a productivity growth of 9.5% between 1995 and 1999. We find support for the hypothesis that...

GPHS-RTGs in support of the Cassini RTG Program. Semi annual technical progress report, September 26, 1994--April 2, 1995

International Nuclear Information System (INIS)

1995-01-01

The technical progress achieved during the period 26 September 1994 through 2 April 1995 on Contract DE-AC03-91SF18852 Radioisotope Thermoelectric Generators and Ancillary Activities is described herein. Monthly technical activity for the period 27 February 1995 through 2 April 1995 is included in this progress report. The report addresses tasks, including: spacecraft integration and liaison; engineering support; safety; qualified unicouple production; ETG Fabrication, assembly, and test; ground support equipment; RTG shipping and launch support; designs, reviews, and mission applications; project management, quality assurance, reliability, contract changes, CAGO acquisition (operating funds), and CAGO maintenance and repair; and CAGO acquisition (capital funds)

Works Technical Department progress report, March 1961

Energy Technology Data Exchange (ETDEWEB)

None

1961-04-19

This document details the activities of the Savannah River Works Technical Department during the month of March 1961. Topics discussed are: Reactor Technology, Separations Technology, Engineering Assistance, Health Physics, Laboratories Overview, and Technical Papers Issued.

From LDEF to a national Space Environment and Effects (SEE) program: A natural progression

Science.gov (United States)

Bowles, David E.; Calloway, Robert L.; Funk, Joan G.; Kinard, William H.; Levine, Arlene S.

1995-02-01

As the LDEF program draws to a close, it leaves in place the fundamental building blocks for a Space Environment and Effects (SEE) program. Results from LDEF data analyses and investigations now form a substantial core of knowledge on the long term effects of the space environment on materials, system and structures. In addition, these investigations form the basic structure of a critically-needed SEE archive and database system. An agency-wide effort is required to capture all elements of a SEE program to provide a more comprehensive and focused approach to understanding the space environment, determining the best techniques for both flight and ground-based experimentation, updating the models which predict both the environments and those effects on subsystems and spacecraft, and, finally, ensuring that this multitudinous information is properly maintained, and inserted into spacecraft design programs. Many parts and pieces of a SEE program already exist at various locations to fulfill specific needs. The primary purpose of this program, under the direction of the Office of Advanced Concepts and Technology (OACT) in NASA Headquarters, is to take advantage of these parts; apply synergisms where possible; identify and when possible fill-in gaps; coordinate and advocate a comprehensive SEE program. The SEE program must coordinate and support the efforts of well-established technical communities wherein the bulk of the work will continue to be done. The SEE program will consist of a NASA-led SEE Steering Committee, consisting of government and industry users, with the responsibility for coordination between technology developers and NASA customers; and Technical Working Groups with primary responsibility for program technical content in response to user needs. The Technical Working Groups are as follows: Materials and Processes; Plasma and Fields; Ionizing Radiation; Meteoroids and Orbital Debris; Neutral External Contamination; Thermosphere, Thermal, and Solar

Determination of aims military-technical policy of Ukraine

Directory of Open Access Journals (Sweden)

O. F. Salnikova

2014-06-01

Full Text Available In the article the aims of military-technical policy are considered. Determination of aims (tasks of military-technical policy, its maintenance, requirements to it and directions of its further development it must come true by the analysis of different factors of external and internal environment. Among such factors: geopolitical and military-political position of Ukraine and its military doctrine; realized and operating programs of development (reformation of the soldiery forming and them technical rigging; terms of future military operations and progress of their maintenance, forms, methods and characteristic signs of battle actions trend; substantive provisions of art of war; conceptions, theories and doctrines of battle application of the soldiery forming of the different states; resources dedicated by the state on development of military-technical sphere and others like that. The fundamental chart of sequence of forming of public military-technical policy is presented in the article.

Nuclear structure theory. Annual technical progress report, October 1, 1976--September 30, 1977

International Nuclear Information System (INIS)

French, J.B.; Koltun, D.S.

1977-01-01

This report summarizes progress during the past year in the following areas of nuclear structure and reaction theory: (1) statistical spectroscopy, including giant resonances for beta and electromagnetic excitation and sum rules (including inverse-energy-weighted sum rules), statistical methods of truncating shell model spaces and renormalization of operators, study of state labelling and ''chains'' of groups, evaluation of fluctuation measures, technical aspects of operator averaging; (2) meson interactions with nuclei, including scattering and absorption of mesons by nuclei (general methods), models for absorption, single- and double-charge exchange of pions, role of rho mesons

FY 1992 work plan and technical progress reports

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-11-01

The Desert Research Institute (DRI) is a division of the University of Nevada System devoted to multidisciplinary scientific research. For more than 25 years, DRI has conducted research for the US Department of Energy`s Nevada Field Office (DOE/NV) in support of operations at the Nevada Test Site (NTS). During that time, the research program has grown from an early focus on hydrologic studies to include the areas of geology, archaeology, environmental compliance and monitoring, statistics, database management, public education, and community relations. The range of DRI`s activities has also expanded to include a considerable amount of management and administrative support in addition to scientific investigations. DRI`s work plan for FY 1992 reflects a changing emphasis in DOE/NV activities from nuclear weapons testing to environmental restoration and monitoring. Most of the environmental projects from FY 1991 are continuing, and several new projects have been added to the Environmental Compliance Program. The Office of Technology Development Program, created during FY 1991, also includes a number of environmental projects. This document contains the FY 1992 work plan and quarterly technical progress reports for each DRI project.

Extending human potential in a technical learning environment

Science.gov (United States)

Fielden, Kay A.

This thesis is a report of a participatory inquiry process looking at enhancing the learning process in a technical academic field in high education by utilising tools and techniques which go beyond the rational/logical, intellectual domain in a functional, objective world. By empathising with, nurturing and sustaining the whole person, and taking account of past patterning as well as future visions including technological advances to augment human awareness, the scene is set for depth learning. Depth learning in a tertiary environment can only happen as a result of the dynamic that exists between the dominant, logical/rational, intellectual paradigm and the experiential extension of the boundaries surrounding this domain. Any experiences which suppress the full, holistic expression of our being alienate us from the fullness of the expression and hence from depth learning. Depth learning is indicated by intrinsic motivation, which is more likely to occur in a trusting and supporting environment. The research took place within a systemic intellectual framework, where emergence is the prime characteristic used to evaluate results.

Final Technical Progress Report: Development of Low-Cost Suspension Heliostat; December 7, 2011 - December 6, 2012

Energy Technology Data Exchange (ETDEWEB)

Bender, W.

2013-01-01

Final technical progress report of SunShot Incubator Solaflect Energy. The project succeeded in demonstrating that the Solaflect Suspension Heliostat design is viable for large-scale CSP installations. Canting accuracy is acceptable and is continually improving as Solaflect improves its understanding of this design. Cost reduction initiatives were successful, and there are still many opportunities for further development and further cost reduction.

Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Part 2. Engineering technology for geological disposal

International Nuclear Information System (INIS)

1999-11-01

Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the deep geological disposal concept for high-level radioactive wastes (HLW) in Japan. The present document, part 2 of the progress report, concerns engineering aspect with reference to Japanese geological disposal plan, according to which the vitrified HLW will be disposed of into a deep, stable rock mass with thick containers and surrounding buffer materials at the depth of several hundred meters. It discusses on multi-barrier systems consisting of a series of engineered and natural barriers that will isolate radioactive nuclides effectively and retard their migrations to the biosphere environment. Performance of repository components, including specifications of containers for vitrified HLW and their overpacks under design as well as buffer material such as Japanese bentonite to be placed in between are described referring also to such possible problems as corrosion arising from the supposed system. It also presents plans and designs for underground disposal facilities, and the presumed management of the underground facilities. (Ohno, S.)

Generation and focusing of pulsed intense ion beams. Technical progress report, 20 August 1981-30 September 1982

International Nuclear Information System (INIS)

Hammer, D.A.; Kusse, B.R.; Sudan, R.N.

1983-07-01

The progress on this contract is described in two parts. The first deals with the technical operation of the LION accelerator which is the exact equivalent to one line of PBFA-I. The second part is concerned with the experimental results on the ion diode mounted at the front end of the LION accelerator

US Department of Energy Environment, Safety and Health Progress Assessment of the Nevada Test Site

Energy Technology Data Exchange (ETDEWEB)

1992-08-01

This report documents the result of the US Department of Energy (DOE) Environment, Safety, and Health (ES&H) Progress Assessment of the Nevada Test Site (NTS), Nye County, Nevada. The assessment, which was conducted from July 20 through August 4, 1992, included a selective review of the ES&H management systems and progress of the responsible DOE Headquarters Program Offices; the DOE Nevada Field Office (NV); and the site contractors. The ES&H Progress Assessments are part of the Secretary of Energy`s continuing effort to institutionalize line management accountability and the self-assessment process throughout DOE and its contractor organizations. This report presents a summary of issues and progress in the areas of environment, safety and health, and management.

US Department of Energy Environment, Safety and Health Progress Assessment of the Nevada Test Site

International Nuclear Information System (INIS)

1992-08-01

This report documents the result of the US Department of Energy (DOE) Environment, Safety, and Health (ES ampersand H) Progress Assessment of the Nevada Test Site (NTS), Nye County, Nevada. The assessment, which was conducted from July 20 through August 4, 1992, included a selective review of the ES ampersand H management systems and progress of the responsible DOE Headquarters Program Offices; the DOE Nevada Field Office (NV); and the site contractors. The ES ampersand H Progress Assessments are part of the Secretary of Energy's continuing effort to institutionalize line management accountability and the self-assessment process throughout DOE and its contractor organizations. This report presents a summary of issues and progress in the areas of environment, safety and health, and management

The U.S. nuclear waste management program - technical progress at Yucca Mountain

Energy Technology Data Exchange (ETDEWEB)

Barrett, L.H. [U.S. Department of Energy (United States)

2001-07-01

This paper discusses the current status of a national program being developed by the U.S. Department of Energy for the management of spent nuclear fuel and high-level radioactive waste produced by civilian nuclear power generation and defense-related activities. In 1987 the U.S. Congress directed the Department to characterize the Yucca Mountain site in Nevada and determine its suitability for development of a geologic repository. This paper will focus on the technical progress that has been made after more than 15 years of scientific and engineering investigations at Yucca Mountain, and the remaining work that is being done to support a decision on whether to recommend the site for development of a geologic repository. (author)

Research Progress and Prospect of GNSS Space Environment Science

Directory of Open Access Journals (Sweden)

YAO Yibin

2017-10-01

Full Text Available Troposphere and ionosphere are two important components of the near-earth space environment. They are close to the surface of the earth and have great influence on human life. The developments of Global Navigation Satellite System (GNSS over the past several decades provide a great opportunity for the GNSS-based space environment science. This review summarizes the research progress and prospect of the GNSS-based research of the Earth's troposphere and ionosphere. On the tropospheric perspective, modeling of the key tropospheric parameters and inversion of precipitable water vapor (PWV are dominant researching fields. On the ionospheric perspective, 2D/3D ionospheric models and regional/global ionospheric monitoring are dominant researching fields.

Technical know-how for modeling of geological environment. (1) Overview and groundwater flow modeling

International Nuclear Information System (INIS)

Saegusa, Hiromitsu; Takeuchi, Shinji; Maekawa, Keisuke; Osawa, Hideaki; Semba, Takeshi

2011-01-01

It is important for site characterization projects to manage the decision-making process with transparency and traceability and to transfer the technical know-how accumulated during the research and development to the implementing phase and to future generations. The modeling for a geological environment is to be used to synthesize investigation results. Evaluation of the impact of uncertainties in the model is important to identify and prioritize key issues for further investigations. Therefore, a plan for site characterization should be made based on the results of the modeling. The aim of this study is to support for the planning of initial surface-based site characterization based on the technical know-how accumulated from the Mizunami Underground Research Laboratory Project and the Horonobe Underground Research Laboratory Project. These projects are broad scientific studies of the deep geological environment that are a basis for research and development for the geological disposal of high-level radioactive wastes. In this study, the work-flow of the groundwater flow modeling, which is one of the geological environment models, and is to be used for setting the area for the geological environment modeling and for groundwater flow characterization, and the related decision-making process using literature data have been summarized. (author)

PRACTICAL ASPECTS FOR DEVELOPMENT OF INFORMATIONAL AND EDUCATIONAL ENVIRONMENT OF HIGH TECHNICAL SCHOOL

Directory of Open Access Journals (Sweden)

Sergey F. Rodionov

2015-01-01

Full Text Available The approach is offered to development of the informational and educational environment of high technical school,based on deep integration of electronic educational content with methods and tools for the engineering problemssolving. The application program interface (API is used asthe main integration instrument, which modern Its have.

The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Kindergarten. Technical Report # 0921

Science.gov (United States)

Alonzo, Julie; Tindal, Gerald

2009-01-01

In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in kindergarten. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2008 and administered to approximately 2800 students from…

Progress in integrated energy-economy-environment model system development

International Nuclear Information System (INIS)

Yasukawa, Shigeru; Mankin, Shuichi; Sato, Osamu; Tadokoro, Yoshihiro; Nakano, Yasuyuki; Nagano, Takao

1987-11-01

The Integrated Energy-Economy-Environment Model System has been developed for providing analytical tools for the system analysis and technology assessments in the field of nuclear research and development. This model system consists of the following four model groups. The first model block installs 5 models and can serve to analyze and generate long-term scenarios on economy-energy-environment evolution. The second model block installs 2 models and can serve to analyze the structural transition phenomena in energy-economy-environment interactions. The third model block installs 2 models and can handle power reactor installation strategy problem and long-term fuel cycle analysis. The fourth model block installs 5 models and codes and can treats cost-benefit-risk analysis and assessments. This report describes mainly the progress and the outlines of application of the model system in these years after the first report on the research and development of the model system (JAERI-M 84 - 139). (author)

Decontamination Systems Information and Research Program. Quarterly technical progress report, January 1--March 31, 1993

Energy Technology Data Exchange (ETDEWEB)

1993-04-01

This reports reports the progress/efforts performed on six technical projects: 1. systematic assessment of the state of hazardous waste clean-up technologies; 2. site remediation technologies (SRT):drain- enhanced soil flushing for organic contaminants removal; 3. SRT: in situ bio-remediation of organic contaminants; 4. excavation systems for hazardous waste sites: dust control methods for in-situ nuclear waste handling; 5. chemical destruction of polychlorinated biphenyls; and 6. development of organic sensors: monolayer and multilayer self-assembled films for chemical sensors.

Operating environment threats influence on the maritime ferry technical system safety – the numerical approach

Directory of Open Access Journals (Sweden)

Kuligowska Ewa

2017-06-01

Full Text Available The material given in this paper delivers the procedure for numerical approach that allows finding the main practically important safety characteristics of the complex technical systems at the variable operation conditions including operating environment threats. The obtained results are applied to the safety evaluation of the maritime ferry technical system. It is assumed that the conditional safety functions are different at various operation states and have the exponential forms. Using the procedure and the program written in Mathematica, the considered maritime ferry technical system main characteristics including: the conditional and the unconditional expected values and standard deviations of the system lifetimes, the unconditional safety function and the risk function are determined.

GPHS-RTGs in support of the Cassini Mission. Semi annual technical progress report, 1 April 1996--29 September 1996

International Nuclear Information System (INIS)

1996-01-01

This technical progress report discusses work on the Radioisotope Generators and Ancillary Activities for the Cassini spacecraft. The Cassini spacecraft is expected to launch in October 1997, and will explore Saturn and its moons. This progress report discusses issues in: spacecraft integration and liason, engineering support, safety, qualified unicouple fabrication, ETG fabrication and testing, ground support equipment, RTG shipping and launch support, designs, reviews and mission application. Safety analysis of the RTGs during reentry and launch accidents are covered. This report covers the period of April 1 to September 29, 1996

Fusion materials semiannual progress report for period ending December 31, 1999

Energy Technology Data Exchange (ETDEWEB)

Burn, G.

2000-03-01

This is the twenty-seventh in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components.

Fusion materials semiannual progress report for period ending December 31, 1999

International Nuclear Information System (INIS)

Burn, G.

2000-01-01

This is the twenty-seventh in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components

Environment and Medical Sciences Division Progress Report

International Nuclear Information System (INIS)

Hainge, W.M.

1980-06-01

The 1979 annual progress report of the UKAEA Environmental and Medical Sciences Division covers both radiological and non-nuclear research programmes in the environmental and toxicological fields. The specific topics were 1) 'atmospheric pollution' which included the analysis of atmospheric trace gases by gas chromatography/mass spectrometry, the life cycle of atmospheric sulphur compounds, photochemical pollution, studies on stratospheric reactions, stratospheric ozone and the effects of pollutants, upper air sampling and monitoring gaseous atmospheric pollutants with passive samplers; 2) miscellaneous 'environmental safety projects'; 3) 'radiation physics' projects concerning a) radioactive fallout, b) studies of stable trace elements in the atmospheric environment and studies of radioactivity in the environment, c) various aspects of dosimetry research including radiation biophysics, d) personnel dosimetry, e) applied radiation spectrometry and f) data systems; 5) 'aerosol and metabolic studies' including whole body counting studies; 6) 'inhalation toxicology and radionuclide analysis' studies including actinide inhalation, cytotoxicity and fibrogenicity of non-radioactive dusts, asbestos and glass fibre research, a Qauntimet 720 image analysis service and radionuclide analysis in biological materials; and 7) 'analytical services' used in relation to 'environmental safety and chemical analysis' projects. (U.K.)

Index to Nuclear Safety: a technical progress review by chronology, permuted title, and author. Vol. 11(1)--Vol. 18(6)

Energy Technology Data Exchange (ETDEWEB)

Cottrell, W.B.; Klein, A.

1978-04-11

This index to Nuclear Safety covers articles published in Nuclear Safety, Vol. 11, No. 1 (January-February 1970), through Vol. 18, No. 6 (November-December 1977). It is divided into three sections: a chronological list of articles (including abstracts) followed by a permuted-title (KWIC) index and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center (NSIC), covers all safety aspects of nuclear power reactors and associated facilities. Over 450 technical articles published in Nuclear Safety in the last eight years are listed in this index.

Index to Nuclear Safety: a technical progress review by chronology, permuted title, and author. Vol. 11(1)--Vol. 18(6)

International Nuclear Information System (INIS)

Cottrell, W.B.; Klein, A.

1978-01-01

This index to Nuclear Safety covers articles published in Nuclear Safety, Vol. 11, No. 1 (January-February 1970), through Vol. 18, No. 6 (November-December 1977). It is divided into three sections: a chronological list of articles (including abstracts) followed by a permuted-title (KWIC) index and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center (NSIC), covers all safety aspects of nuclear power reactors and associated facilities. Over 450 technical articles published in Nuclear Safety in the last eight years are listed in this index

The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 1. Technical Report # 0919

Science.gov (United States)

Alonzo, Julie; Tindal, Gerald

2009-01-01

In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grade 1. These measures, available as part of easyCBM [TM], an online progress monitoring assessment system, were developed in 2008 and administered to approximately 2800 students from schools…

The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 2. Technical Report # 0920

Science.gov (United States)

Alonzo, Julie; Lai, Cheng Fei; Tindal, Gerald

2009-01-01

In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 7. Technical Report 0908

Science.gov (United States)

Lai, Cheng Fei; Alonzo, Julie; Tindal, Gerald

2009-01-01

In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

Amarillo National Resource Center for Plutonium. Quarterly technical progress report, May 1, 1997--July 31, 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-09-01

Progress summaries are provided from the Amarillo National Center for Plutonium. Programs include the plutonium information resource center, environment, public health, and safety, education and training, nuclear and other material studies.

Progresso tecnico, forme di mercato e disoccupazione. ( Technical progress, market forms and unemployment

Directory of Open Access Journals (Sweden)

A. ASIMAKOPULOS A.

2013-12-01

Full Text Available Lo scopo del presente lavoro è triplice . Il primo obiettivo è quello di sottolineare l'importanza delle intuizioni da trovare nel lavoro di Sylos Labini . Il secondo scopo è quello di espandere su di essa distinguendo tra i diversi tipi di progresso tecnico . Infine , il terzo obiettivo è quello di commentare il confronto di Labini di Ricardo e Keynes sulla possibilità di disoccupazione tecnologica . Per quanto riguarda la sua descrizione del progresso tecnologico come " risparmio di lavoro " , l'autore mostra che una descrizione più completa sarebbe più utile per i suoi scopiThe purpose of the present paper is threefold. The first purpose is to emphasise the importance of the insights to be found in Sylos Labini’s work. The second purpose is to expand upon it by distinguishing  between the different types of technical progress. Finally, the third purpose is to comment on Labini’s comparison of Ricardo and Keynes on the possibility of technological unemployment. Regarding his description of technological progress as “labour saving”, the author shows that a more comprehensive description would be more useful for his purposes.JEL: E24, J64, O33

Technical progress and efficiency changes in football teams participating in the UEFA Champions League

Directory of Open Access Journals (Sweden)

Lucía Isabel García Cebrián

2015-09-01

Full Text Available This paper commits to calculate and analyze productivy levels and its components for teams that participated in the UEFA Champions League between 2003 and 2012. It will pursue three objectives: 1 evaluate resources usage, 2 analyze the productivity levels of the football teams and the sports results, and 3 see the influence of participation experience in reference to productivity and sports results. Using Malmquist Productivity Index, the results reflect a lack of consistent progression of efficiency, productivity, and technical change. This competition does not reward the efficient usage of resources and there is not a conclusive relationshop between permanence in the competition and productivity.

Volatiles combustion in fluidized beds. Technical progress report, 4 March 1993--3 June 1993

Energy Technology Data Exchange (ETDEWEB)

Hesketh, R.P.

1993-09-01

The goal of this project is to investigate the conditions in which volatiles will burn within both the dense and freeboard regions of fluidized beds. Experiments using a fluidized bed operated at incipient fluidization will be performed to characterize the effect of particle surface area, initial fuel concentration, and particle type on the inhibition of volatiles within a fluidized bed. The work conducted during the period 4 March, 1993 through 3 June, 1993 is reported in this technical progress report. The work during this time period consists primarily of the startup and trouble shooting of the fluidized bed reactor and gas phase modeling of methane and propane.

Teaching technical disciplines in a college by means of the resources of the Moodle software environment

Directory of Open Access Journals (Sweden)

Касымбек Тулеуович Алдияров

2011-12-01

Full Text Available The paper considers the didactic features of the free software environment Moodle open source and its testing in the implementation of e-learning technical subjects in the learning process of college.

Facilitating 3D Virtual World Learning Environments Creation by Non-Technical End Users through Template-Based Virtual World Instantiation

Science.gov (United States)

Liu, Chang; Zhong, Ying; Ozercan, Sertac; Zhu, Qing

2013-01-01

This paper presents a template-based solution to overcome technical barriers non-technical computer end users face when developing functional learning environments in three-dimensional virtual worlds (3DVW). "iVirtualWorld," a prototype of a platform-independent 3DVW creation tool that implements the proposed solution, facilitates 3DVW…

The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 3. Technical Report # 09-02

Science.gov (United States)

Alonzo, Julie; Lai, Cheng Fei; Tindal, Gerald

2009-01-01

In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 5. Technical Report # 09-01

Science.gov (United States)

Lai, Cheng Fei; Alonzo, Julie; Tindal, Gerald

2009-01-01

In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 4. Technical Report # 09-03

Science.gov (United States)

Alonzo, Julie; Lai, Cheng Fei; Tindal, Gerald

2009-01-01

In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

The Development of K-8 Progress Monitoring Measures in Mathematics for Use with the 2% and General Education Populations: Grade 8. Technical Report # 09-04

Science.gov (United States)

Lai, Cheng Fei; Alonzo, Julie; Tindal, Gerald

2009-01-01

In this technical report, we describe the development and piloting of a series of mathematics progress monitoring measures intended for use with students in grades kindergarten through eighth grade. These measures, available as part of easyCBM[TM], an online progress monitoring assessment system, were developed in 2007 and 2008 and administered to…

National Council on Radiation Protection and Measurements semiannual technical progress report, March 1989--August 1989

International Nuclear Information System (INIS)

Ney, W.R.

1991-01-01

This semiannual technical progress report is for the period 1 March 1989 through 31 August 1989. This National Council on Radiation Protection and Measurements (NCRP) program is designed to provide recommendations for radiation protection based on scientific principles. During this period several reports were published covering the topics of occupational radiation exposure, medical exposure, radon control, dosimetry, and radiation protection standards. Accomplishments of various committees are also reported; including the committees on dental x-ray protection, radiation safety in uranium mining and milling, ALARA, instrumentation, records maintenance, occupational exposures of medical personnel, emergency planning, and others. (SM)

Index to Nuclear Safety: a technical progress review by chronology, permuted title, and author, Volume 18 (1) through Volume 22 (6)

International Nuclear Information System (INIS)

Cottrell, W.B.; Passiakos, M.

1982-06-01

This index to Nuclear Safety covers articles published in Nuclear Safety, Volume 18, Number 1 (January-February 1977) through Volume 22, Number 6 (November-December 1981). The index is divided into three section: a chronological list of articles (including abstracts), a permuted-title (KWIC) index, and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center, covers all safety aspects of nuclear power reactors and associated facilities. Over 300 technical articles published in Nuclear Safety in the last 5 years are listed in this index

Index to Nuclear Safety: a technical progress review by chronology, permuted title, and author, Volume 18 (1) through Volume 22 (6)

Energy Technology Data Exchange (ETDEWEB)

Cottrell, W.B.; Passiakos, M.

1982-06-01

This index to Nuclear Safety covers articles published in Nuclear Safety, Volume 18, Number 1 (January-February 1977) through Volume 22, Number 6 (November-December 1981). The index is divided into three section: a chronological list of articles (including abstracts), a permuted-title (KWIC) index, and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center, covers all safety aspects of nuclear power reactors and associated facilities. Over 300 technical articles published in Nuclear Safety in the last 5 years are listed in this index.

Index to Nuclear Safety. A technical progress review by chronology, permuted title, and author. Vol. 11, No. 1--Vol. 17, No. 6

International Nuclear Information System (INIS)

Cottrell, W.B.; Klein, A.

1977-01-01

This index to Nuclear Safety covers articles in Nuclear Safety Vol. 11, No. 1 (Jan.-Feb. 1970), through Vol. 17, No. 6 (Nov.-Dec. 1976). The index includes a chronological list of articles (including abstract) followed by KWIC and Author Indexes. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center, covers all safety aspects of nuclear power reactors and associated facilities. The index lists over 350 technical articles in the last six years of publication

Index to Nuclear Safety. A technical progress review by chronology, permuted title, and author. Vol. 11, No. 1--Vol. 17, No. 6

Energy Technology Data Exchange (ETDEWEB)

Cottrell, W.B.; Klein, A.

1977-02-23

This index to Nuclear Safety covers articles in Nuclear Safety Vol. 11, No. 1 (Jan.-Feb. 1970), through Vol. 17, No. 6 (Nov.-Dec. 1976). The index includes a chronological list of articles (including abstract) followed by KWIC and Author Indexes. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center, covers all safety aspects of nuclear power reactors and associated facilities. The index lists over 350 technical articles in the last six years of publication.

Environment, safety and health progress assessment of the Fernald Environmental Management Project (FEMP)

International Nuclear Information System (INIS)

1991-11-01

This report documents the results of the Environment, Safety, and Health (ES ampersand H) Progress Assessment of the Fernald Environmental Management Project (FEMP), Fernald, Ohio, conducted from October 15 through October 25, 1991. The Secretary of Energy directed that small, focused, ES ampersand H Progress Assessments be performed as part of the continuing effort to institutionalize line management accountability and the self-assessment process in the areas of ES ampersand H. The FEMP assessment is the pilot assessment for this new program. The objectives for the FEMP ES ampersand H Progress Assessment were to assess: (1) how the FEMP has progressed since the 1989 Tiger Assessment; (2) how effectively the FEMP has corrected specific deficiencies and associated root causes identified by that team; and (3) whether the current organization, resources, and systems are sufficient to proactively manage ES ampersand H issues

Environment, safety and health progress assessment of the Fernald Environmental Management Project (FEMP)

Energy Technology Data Exchange (ETDEWEB)

1991-11-01

This report documents the results of the Environment, Safety, and Health (ES&H) Progress Assessment of the Fernald Environmental Management Project (FEMP), Fernald, Ohio, conducted from October 15 through October 25, 1991. The Secretary of Energy directed that small, focused, ES&H Progress Assessments be performed as part of the continuing effort to institutionalize line management accountability and the self-assessment process in the areas of ES&H. The FEMP assessment is the pilot assessment for this new program. The objectives for the FEMP ES&H Progress Assessment were to assess: (1) how the FEMP has progressed since the 1989 Tiger Assessment; (2) how effectively the FEMP has corrected specific deficiencies and associated root causes identified by that team; and (3) whether the current organization, resources, and systems are sufficient to proactively manage ES&H issues.

Environment, Safety and Health Progress Assessment of the Argonne Illinois Site

Energy Technology Data Exchange (ETDEWEB)

1993-11-01

This report documents the results of the US Department of Energy (DOE) Environment, Safety and Health (ES&H) Progress Assessment of the Argonne Illinois Site (AIS), near Chicago, Illinois, conducted from October 25 through November 9, 1993. During the Progress Assessment, activities included a selective review of the ES&H management systems and programs with principal focus on the DOE Office of Energy Research (ER); CH, which includes the Argonne Area Office; the University of Chicago; and the contractor`s organization responsible for operation of Argonne National Laboratory (ANL). The ES&H Progress Assessments are part of DOE`s continuing effort to institutionalize line management accountability and the self-assessment process throughout DOE and its contractor organizations. The purpose of the AIS ES&H Progress Assessment was to provide the Secretary of Energy, senior DOE managers, and contractor management with concise independent information on the following: change in culture and attitude related to ES&H activities; progress and effectiveness of the ES&H corrective actions resulting from the previous Tiger Team Assessment; adequacy and effectiveness of the ES&H self-assessment process of the DOE line organizations, the site management, and the operating contractor; and effectiveness of DOE and contractor management structures, resources, and systems to effectively address ES&H problems and new ES&H initiatives.

Environment, Safety and Health Progress Assessment of the Argonne Illinois Site

International Nuclear Information System (INIS)

1993-11-01

This report documents the results of the US Department of Energy (DOE) Environment, Safety and Health (ES ampersand H) Progress Assessment of the Argonne Illinois Site (AIS), near Chicago, Illinois, conducted from October 25 through November 9, 1993. During the Progress Assessment, activities included a selective review of the ES ampersand H management systems and programs with principal focus on the DOE Office of Energy Research (ER); CH, which includes the Argonne Area Office; the University of Chicago; and the contractor's organization responsible for operation of Argonne National Laboratory (ANL). The ES ampersand H Progress Assessments are part of DOE's continuing effort to institutionalize line management accountability and the self-assessment process throughout DOE and its contractor organizations. The purpose of the AIS ES ampersand H Progress Assessment was to provide the Secretary of Energy, senior DOE managers, and contractor management with concise independent information on the following: change in culture and attitude related to ES ampersand H activities; progress and effectiveness of the ES ampersand H corrective actions resulting from the previous Tiger Team Assessment; adequacy and effectiveness of the ES ampersand H self-assessment process of the DOE line organizations, the site management, and the operating contractor; and effectiveness of DOE and contractor management structures, resources, and systems to effectively address ES ampersand H problems and new ES ampersand H initiatives

1997 technical progress report

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-07-01

This report presents the on-going research and development projects of the Philippine Nuclear Research Institute (PNRI) in the fields of agriculture, environment and industry, scientific and technological services and nuclear regulations, licensing and safeguards.

1999 technical progress report

International Nuclear Information System (INIS)

2000-01-01

This report presents the on-going research and development projects of the Philippine Nuclear Research Institute (PNRI) in the fields of agriculture, environment and industry, scientific and technological services and nuclear regulations, licensing and safeguards

1999 technical progress report

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

This report presents the on-going research and development projects of the Philippine Nuclear Research Institute (PNRI) in the fields of agriculture, environment and industry, scientific and technological services and nuclear regulations, licensing and safeguards.

1997 technical progress report

International Nuclear Information System (INIS)

1998-01-01

This report presents the on-going research and development projects of the Philippine Nuclear Research Institute (PNRI) in the fields of agriculture, environment and industry, scientific and technological services and nuclear regulations, licensing and safeguards

Aviation Trends Related to Atmospheric Environment Safety Technologies Project Technical Challenges

Science.gov (United States)

Reveley, Mary S.; Withrow, Colleen A.; Barr, Lawrence C.; Evans, Joni K.; Leone, Karen M.; Jones, Sharon M.

2014-01-01

Current and future aviation safety trends related to the National Aeronautics and Space Administration's Atmospheric Environment Safety Technologies Project's three technical challenges (engine icing characterization and simulation capability; airframe icing simulation and engineering tool capability; and atmospheric hazard sensing and mitigation technology capability) were assessed by examining the National Transportation Safety Board (NTSB) accident database (1989 to 2008), incidents from the Federal Aviation Administration (FAA) accident/incident database (1989 to 2006), and literature from various industry and government sources. The accident and incident data were examined for events involving fixed-wing airplanes operating under Federal Aviation Regulation (FAR) Parts 121, 135, and 91 for atmospheric conditions related to airframe icing, ice-crystal engine icing, turbulence, clear air turbulence, wake vortex, lightning, and low visibility (fog, low ceiling, clouds, precipitation, and low lighting). Five future aviation safety risk areas associated with the three AEST technical challenges were identified after an exhaustive survey of a variety of sources and include: approach and landing accident reduction, icing/ice detection, loss of control in flight, super density operations, and runway safety.

Radiology and the internet, basic principles and technical requirements

International Nuclear Information System (INIS)

Boegl, K.

2000-01-01

As a new communication media the Internet has revolutionized the global exchange of information which is one of the major sources of progress in medicine. This article reviews the history of the Internet's evolution and describes some fundamental technical concepts. The importance of Internet services for everyday professional work is examined with special consideration of radiology. Special emphasis is laid on the current technical limitations that have delayed a broad practical implementation of tele-medical applications. As a highly innovative medical speciality, radiology has always been at the forefront of research and development in the field of clinical Internet applications. By taking a look at recent innovations, the impact of the Internet on the radiologist's working environment of the future is highlighted. (orig.) [de

Fusion reactor materials semiannual progress report for period ending September 30, 1990

International Nuclear Information System (INIS)

1991-04-01

This is the ninth in series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following technical progress reports: Alloy Development of Irradiation Performance; Damage Analysis and Fundamental Studies; and Special Purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials program being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide

Fusion reactor materials: Semiannual progress report for period ending September 30, 1987

International Nuclear Information System (INIS)

1988-03-01

This is the third in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following technical progress reports: Alloy Development for Irradiation Performances; Damage Analysis and Fundamental Studies; Special Purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials program being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide

Progress report : Technical Physics Division

International Nuclear Information System (INIS)

Gopalaraman, C.P.; Deshpande, R.Y.

1978-01-01

The research and development work carried out in the Technical Physics Division of the Bhabha Atomic Research Centre, Bombay, is reported. Some of the achievements are: (1) fabrication of mass spectrometers for heavy water analysis and lithium 6/7 isotope ratio measurement, (2) fabrication of electronic components for mass spectrometers, (3) growing of sodium iodide crystals for radiation detectors, (4) development of sandwich detectors comprising of NaI(Tl) and CaI(Na), (5) fabrication of mass spectrometer type leak detectors and (6) fabrication of the high vacuum components of the vacuum system of the variable energy cyclotron based at Calcutta. (M.G.B.)

1996 technical progress report

International Nuclear Information System (INIS)

1997-01-01

Summaries of the researches are grouped into programs as follows: research and development in food and agriculture; research and development in health, environment and industry which includes all the PNRI research projects in 1996; scientific and technological services; and the nuclear regulations, licensing and safeguards of the institute

1996 technical progress report

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

Summaries of the researches are grouped into programs as follows: research and development in food and agriculture; research and development in health, environment and industry which includes all the PNRI research projects in 1996; scientific and technological services; and the nuclear regulations, licensing and safeguards of the institute.

Solar lease grant program. Technical progress report

Energy Technology Data Exchange (ETDEWEB)

1981-04-01

Progress on a lease program for the installation of a solar water heater with no installation charge is reported. Information on the announcement of the program, the selection of participants, the contractural agreement, progress on installation of equipment, monitoring, and evaluation is summarized. The status of the budget concerned with the program is announced. Forms used for applications for the program and an announcement from Resource Alternatives for Cilco customers are presented.

Proceedings of the technical meetings 'Water, radioactivity and environment'

International Nuclear Information System (INIS)

Perceval, Olivier; Foulquier, Luc; Canneva, Guillem; Jedor, Beatrice; Genthon, Benedicte; Vicaud, Alain; Skrzypczak, Julien; Gibeaux, Audrey; Phrommavanh, Vannapha; Descostes, Michael; Tognelli, Antoine; Calmet, Dominique; Leprieur, Fabrice; Pignol, David; Thybaud, Eric; Feray, Christine; Leclerc, Elisabeth; Maitre, Melanie; Calmon, Philippe; Marang, Laura; Beaugelin-Seiller, Karine; Garnier-Laplace, Jacqueline; Leprieur, Fabrice; Philippot, Benoit; Hemidy, Pierre-Yves; Devin, Patrick; Perrier, Gilles; CALVEZ, Marianne; Descamps, E.; Preveral, S.; Brutesco, C.; Ginet, N.; Escofier, C.; Garcia, D.; Pignol, D.; Ansaldi, M.; Rodrigue, A.; Bazin, I.; Cholat, P.; Bailly-Du-Bois, Pascal; Fievet, Bruno; Godinot, Claire; Eyrolle-Boyer, Frederique; Antonelli, Christelle; Tournieux, Damien; Augeray, Celine; Galliez, Kevin; Baconet, I.; Cavaliere, N.; Dias Varela, D.; Foulon, L.; Laconici, C.; Lorand, H.; Mouton, M.; Siscard, N.; Tarlette, L.; Loyen, Jeanne; Gleizes, Marc; Vidal, R.; Borgia, Cecile; Hemidy, Pierre-Yves; Fouchet, Loic; Gontier, G.; Grignard, G.; Drozdzak, Jegodz; Leermakers, Martine; Brun, Frederic; Ameon, Roselyne; Gleizes, Marc; Maulard, Alain; Moine, Jerome; Tchilian, Nathalie; Paillard, Herve; Gaid, Abdelkader; Wittmann, Erich; Boucherie, Christophe; Devin, Patrick

2014-12-01

These technical days were organized by the 'Environment section' of the French Society of Radiation Protection (SFRP). Their aim was to review the current state of water use, management and monitoring, in particular in the nuclear industry, both on the radiological and chemical aspects. This document brings together the available presentations (slides) together with their corresponding abstracts (in French) and dealing with: 1 - Environmental issues linked to water and aquatic ecosystems contamination by micropollutants (O. Perceval); 2 - 50 years of radioecology in aquatic environments (L. Foulquier); 3 - Regulation and organisation of the French administration for water and aquatic ecosystems management (G. Canneva); 4 -European and French regulations about the radiological quality of drinking water (B. Jedor); 5 - Water samplings and liquid effluents from nuclear facilities: regulation, authorisations, prescriptions (B. Genthon); 6 - Water needs of a NPP (A. Vicaud); 7 - Water management at old uranium mining sites (A. Gibeaux); 8 - Mobile system for liquid effluents treatment (J. Skrzypczak); 9 - Water: an essential vector for the transfer of radioactive and chemical compounds in the underground (A. Tognelli); 10 - Environmental guide values for aquatic ecosystems protection (E. Thybaud); 11 - Prioritisation work for radioactive and chemical compounds to be monitored in aquatic environments in the framework of the environment perennial lab (E. Leclerc); 12 - Liquid radioactive effluents in continental aquatic environments: why and how estimating the impact? (K. Beaugelin-Seiller); 13 - Sustainable water management: standards, a compulsory tool (D. Calmet); 14 - Water sampling: from theory to practice (F. Leprieur, B. Philippot); 15 - Prototype for the detection of toxic compounds in the environment (D. Pignol); 16 - Nuclear metrology and water: new available and developing techniques (C. Augeray, K. Galliez); 17 - Measurement of the uranium and radium bio

Savannah River Ecology Laboratory annual technical progress report of ecological research, period ending July 31, 1993

Energy Technology Data Exchange (ETDEWEB)

Vaitkus, M.R.; Wein, G.R. [eds.; Johnson, G.

1993-11-01

This progress report gives an overview of research programs at the Savannah River Site. Topics include; environmental operations support, wood stork foraging and breeding, defense waste processing, environmental stresses, alterations in the environment due to pollutants, wetland ecology, biodiversity, pond drawdown studies, and environmental toxicology.

Technical progress report

International Nuclear Information System (INIS)

1996-01-01

This report summarizes experimental and theoretical work in basic nuclear physics carried out between October 1, 1995, the closing of our last Progress Report, and September 30, 1996 at the Nuclear Physics Laboratory of the University of Colorado, Boulder, under contracts DE-FG03-93ER-40774 and DE-FG03-95ER-40913 with the United States Department of Energy. The experimental contract supports broadly-based experimental research in intermediate energy nuclear physics. This report includes results from studies of Elementary Systems involving the study of the structure of the nucleon via polarized high-energy positron scattering (the HERMES experiment) and lower energy pion scattering from both polarized and unpolarized nucleon targets. Results from pion- and kaon-induced reactions in a variety of nuclear systems are reported under the section heading Meson Reactions; the impact of these and other results on understanding the nucleus is presented in the Nuclear Structure section. In addition, new results from scattering of high-energy electrons (from CEBAF/TJNAF) and pions (from KEK) from a broad range of nuclei are reported in the section on Incoherent Reactions. Finally, the development and performance of detectors produced by the laboratory are described in the section titled Instrumentation

A systematic assessment of the state of hazardous waste clean-up technologies. Quarterly technical progress report, April 1--June 30, 1993

Energy Technology Data Exchange (ETDEWEB)

Berg, M.T.; Reed, B.E.; Gabr, M.

1993-07-01

West Virginia University (WVU) and the US DOE Morgantown Energy Technology Center (METC) entered into a Cooperative Agreement on August 29, 1992 entitled ``Decontamination Systems Information and Research Programs.`` Stipulated within the Agreement is the requirement that WVU submit to METC a series of Technical Progress Report for Year 1 of the Agreement. This report reflects the progress and/or efforts performed on the following nine technical projects encompassed by the Year 1 Agreement for the period of April 1 through June 30, 1993: Systematic assessment of the state of hazardous waste clean-up technologies; site remediation technologies -- drain-enhanced soil flushing (DESF) for organic contaminants removal; site remediation technologies -- in situ bioremediation of organic contaminants; excavation systems for hazardous waste sites; chemical destruction of polychlorinated biphenyls; development of organic sensors -- monolayer and multilayer self-assembled films for chemical sensors; Winfield lock and dam remediation; Assessments of Technologies for hazardous waste site remediation -- non-treatment technologies and pilot scale test facility implementation; and remediation of hazardous sites with stream reforming.

The digital Dalton Plan: Progressive education as integral part of web-based learning environments

Directory of Open Access Journals (Sweden)

Georg Weichhart

2018-03-01

Full Text Available e-Learning systems increasingly support learning management and self-organized learning processes. Since the latter have been studied in the field of progressive education extensively, it is worthwhile to consider them for developing digital learning environments to support self-regulated learning processes. In this paper we aim at transforming one of the most prominent and sustainable approaches to self-organized learning, the “Dalton Plan” as proposed by Helen Parkhurst. Its assignment structure supports learners when managing their learning tasks, thus triggering self-organized acquisition of knowledge, and its feedback graphs enable transparent learning processes. Since e-learning environments have become common use, rather than creating another system, we propose a modular approach that can be used for extending existing e-learning environments. In order to design a respective component, we interviewed experts in self-organized e-learning. Their input facilitated integrating the Dalton Plan with existing features of e-learning environments. After representing each interview in concept maps, we were able to aggregate them for deriving e-learning requirements conform to the Dalton Plan instruments. In the course of implementing them, particular attention had to be paid to the asynchrony of interaction during runtime. Java Server Faces technology enable the Dalton Plan component to be migrated into existing web 2.0 e-learning platforms. The result was evaluated based on the acquired concept maps, as they also captured the transformation process of the Dalton Plan to e-learning features. The findings encourage embodying further progressive education approaches in this way, since the structured (concept mapping of the Dalton Plan to e-learning features turned out to be accurate. The experts were able to recognize the potential of the approach both in terms of structuring the knowledge acquisition process, and in terms of developing

Alternate Endpoints for Deep Vadose Zone Environments: Challenges, Opportunities, and Progress - 13036

International Nuclear Information System (INIS)

Wellman, Dawn M.; Freshley, Mark D.; Truex, Michael J.; Lee, M. Hope

2013-01-01

Current requirements for site remediation and closure are standards-based and are often overly conservative, costly, and in some cases, technically impractical to achieve. Use of risk-informed alternate endpoints provide a means to achieve remediation goals that are permitted by regulations and are protective of human health and the environment. Alternate endpoints enable establishing a path for cleanup that may include intermediate remedial milestones and transition points and/or regulatory alternatives to standards-based remediation. A framework is presented that is centered around developing and refining conceptual models in conjunction with assessing risks and potential endpoints as part of a system-based assessment that integrates site data with scientific understanding of processes that control the distribution and transport of contaminants in the subsurface and pathways to receptors. This system-based assessment and subsequent implementation of the remediation strategy with appropriate monitoring are targeted at providing a holistic approach to addressing risks to human health and the environment. This holistic approach also enables effective predictive analysis of contaminant behavior to provide defensible criteria and data for making long-term decisions. Developing and implementing an alternate endpoint-based approach for remediation and waste site closure presents a number of challenges and opportunities. Categories of these challenges include scientific and technical, regulatory, institutional, and budget and resource allocation issues. Opportunities exist for developing and implementing systems-based approaches with respect to supportive characterization, monitoring, predictive modeling, and remediation approaches. (authors)

Alternate Endpoints for Deep Vadose Zone Environments: Challenges, Opportunities, and Progress - 13036

Energy Technology Data Exchange (ETDEWEB)

Wellman, Dawn M.; Freshley, Mark D.; Truex, Michael J.; Lee, M. Hope [Pacific Northwest National Laboratory, 902 Battelle Blvd, Richland, WA, 99352 (United States)

2013-07-01

Current requirements for site remediation and closure are standards-based and are often overly conservative, costly, and in some cases, technically impractical to achieve. Use of risk-informed alternate endpoints provide a means to achieve remediation goals that are permitted by regulations and are protective of human health and the environment. Alternate endpoints enable establishing a path for cleanup that may include intermediate remedial milestones and transition points and/or regulatory alternatives to standards-based remediation. A framework is presented that is centered around developing and refining conceptual models in conjunction with assessing risks and potential endpoints as part of a system-based assessment that integrates site data with scientific understanding of processes that control the distribution and transport of contaminants in the subsurface and pathways to receptors. This system-based assessment and subsequent implementation of the remediation strategy with appropriate monitoring are targeted at providing a holistic approach to addressing risks to human health and the environment. This holistic approach also enables effective predictive analysis of contaminant behavior to provide defensible criteria and data for making long-term decisions. Developing and implementing an alternate endpoint-based approach for remediation and waste site closure presents a number of challenges and opportunities. Categories of these challenges include scientific and technical, regulatory, institutional, and budget and resource allocation issues. Opportunities exist for developing and implementing systems-based approaches with respect to supportive characterization, monitoring, predictive modeling, and remediation approaches. (authors)

GT-MHR COMMERCIALZATION STUDY. TECHNICAL PROGRESS AND COST MANAGEMENT REPORT FOR THE PERIOD MAY 1 THROUGH MAY 31, 2003

International Nuclear Information System (INIS)

SHENOY, A.S.

2003-01-01

A271 GT-MHR COMMERCIALZATION STUDY TECHNICAL PROGRESS AND COST MANAGEMENT REPORT FOR THE PERIOD MAY 1 THROUGH MAY 31, 2003. Petten advised GA the start of the HFR-EU2 irradiation is being delayed until late July 2004. HFR-EU1 (pebble fuel) is also delayed until February/March 2004. The reason for the delays was implementation of new financial regulations at Petten that delayed the contracts for capsule fabrication. Review of the MHR-2 Fuel Product Specification was completed. Revision of the specification to incorporate the review results is in progress. Detailed test matrices have been drafted for capsule irradiation tests and for post-irradiation heating tests proposed for development and qualification of advanced coated-particle fuels capable of meeting anticipated VHTR fuel performance requirements

Technical progress review of extraction of uranium from fly ash

International Nuclear Information System (INIS)

Gao Renxi; Gao Junning; Wu Qingming; Chen Gang; Wan Hongjin; Zhang Ziyue

2014-01-01

The increasing of fly ash in coal-fired power plants at home and abroad year by year and the potential impacts to the environment attracted media attention. Although the extraction of uranium from the fly ash in coal-fired power plants had optional process from technique aspect and sufficient preliminary researches, but considering the low grade of the uranium in fly ash and particularity of the mineral composition, it is easy to have a high cost of extraction. As a consequence, it is not included in the development plan of uranium mining and metallurgy. The present applications of fly ash are only building materials, building roads and pit valley backfill, the resource utilization rate was low and was still in its early stages of development and application. In view of this, the research advances and the latest development trends of extraction of uranium from fly ash at home and abroad were introduced from the technical aspect, and the beneficial analyzes of the prospect and advices to this industry were given. (authors)

Index to Nuclear Safety. A technical progress review by chronology, permuted title, and author. Vol 11, No. 1 through Vol. 16, No. 6

International Nuclear Information System (INIS)

Cottrell, W.B.; Klein, A.

1976-04-01

This index to Nuclear Safety covers articles in Nuclear Safety Vol. 11, No. 1 (Jan.-Feb. 1970) through Vol. 16, No. 6 (Nov.-Dec. 1975). Included in the index is a chronological list of articles (including abstract) followed by both a KWIC index and an Author Index. Nuclear Safety is a bimonthly technical progress review prepared by the Nuclear Safety Information Center and covers all safety aspects of nuclear power reactors and associated facilities. The index lists over 300 technical articles in the last six years of publication

Index to Nuclear Safety. A technical progress review by chronology, permuted title, and author. Vol 11, No. 1 through Vol. 16, No. 6

Energy Technology Data Exchange (ETDEWEB)

Cottrell, W.B.; Klein, A.

1976-04-01

This index to Nuclear Safety covers articles in Nuclear Safety Vol. 11, No. 1 (Jan.-Feb. 1970) through Vol. 16, No. 6 (Nov.-Dec. 1975). Included in the index is a chronological list of articles (including abstract) followed by both a KWIC index and an Author Index. Nuclear Safety is a bimonthly technical progress review prepared by the Nuclear Safety Information Center and covers all safety aspects of nuclear power reactors and associated facilities. The index lists over 300 technical articles in the last six years of publication.

Power systems development facility. Quarterly technical progress report, January 1, 1994--March 31, 1994

Energy Technology Data Exchange (ETDEWEB)

1994-07-01

This quarterly technical progress report summarizes work completed during the last quarter of the Second Budget Period, January 1 through March 31, 1994, entitled {open_quotes}Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion.{close_quotes} The objective of this project is to evaluate hot gas particulate control technologies using coal-derived gas streams. This will entail the design, construction, installation, and use of a flexible test facility which can operate under realistic gasification and combustion conditions. The major particulate control device issues to be addressed include the integration of the particulate control devices into coal utilization systems, on-line cleaning techniques, chemical and thermal degradation of components, fatigue or structural failures, blinding, collection efficiency as a function of particle size, and scale-up of particulate control systems to commercial size.

Waste Isolation Safety Assessment Program. Technical progress report for FY-1978

International Nuclear Information System (INIS)

Brandstetter, A.; Harwell, M.A.; Howes, B.W.; Benson, G.L.; Bradley, D.J.; Raymond, J.R.; Serne, R.J.; Schilling, A.H.

1979-07-01

Associated with commercial nuclear power production in the United States is the generation of potentially hazardous radioactive wastes. The Department of Energy (DOE) is seeking to develop nuclear waste isolation systems in geologic formations that will preclude contact with the biosphere of waste radionuclides in concentrations which are sufficient to cause deleterious impact on humans or their environments. Comprehensive analyses of specific isolation systems are needed to assess the expectations of meeting that objective. The Waste Isolation Safety Assessment Program (WISAP) has been established at the Pacific Northwest Laboratory (operated by Battelle Memorial Institute) for developing the capability of making those analyses. Progress on the following tasks is reported: release scenario analysis, waste form release rate analysis, release consequence analysis, sorption-desorption analysis, and societal acceptance analysis

Fusion reactor materials. Semiannual progress report for period ending September 30, 1993

Energy Technology Data Exchange (ETDEWEB)

Rowcliffe, A.F.; Burn, G.L.; Knee`, S.S.; Dowker, C.L. [comps.

1994-02-01

This is the fifteenth in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following progress reports: Alloy Development for Irradiation Performance; Damage Analysis and Fundamental Studies; Special purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials programs being conducted in support of the Magnetic Fusion Energy Program of the U.S. Department of Energy. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide.

Deep vadose zone remediation: technical and policy challenges, opportunities, and progress in achieving cleanup endpoints

International Nuclear Information System (INIS)

Wellman, D.M.; Freshley, M.D.; Truex, M.J.; Lee, M.H.

2013-01-01

Current requirements for site remediation and closure are standards-based and are often overly conservative, costly, and in some cases, technically impractical. Use of risk-informed alternate endpoints provides a means to achieve remediation goals that are permitted by regulations and are protective of human health and the environment. Alternate endpoints enable the establishment of a path for cleanup that may include intermediate remedial milestones and transition points and/or regulatory alternatives to standards-based remediation. A framework is presented that is centered around developing and refining conceptual models in conjunction with assessing risks and potential endpoints as part of a system-based assessment that integrates site data with scientific understanding of processes that control the distribution and transport of contaminants in the subsurface and pathways to receptors. This system-based assessment and subsequent implementation of the remediation strategy with appropriate monitoring are targeted at providing a holistic approach to addressing risks to human health and the environment. This holistic approach also enables effective predictive analysis of contaminant behavior to provide defensible criteria and data for making long-term decisions. Developing and implementing an alternate endpoint-based approach for remediation and waste site closure presents a number of challenges and opportunities. Categories of these challenges include scientific and technical, regulatory, institutional, and budget and resource allocation issues. Opportunities exist for developing and implementing systems-based approaches with respect to supportive characterization, monitoring, predictive modeling, and remediation approaches. (authors)

Deep vadose zone remediation: technical and policy challenges, opportunities, and progress in achieving cleanup endpoints

Energy Technology Data Exchange (ETDEWEB)

Wellman, D.M.; Freshley, M.D.; Truex, M.J.; Lee, M.H. [Pacific Northwest National Laboratory, Richland, Washington (United States)

2013-07-01

Current requirements for site remediation and closure are standards-based and are often overly conservative, costly, and in some cases, technically impractical. Use of risk-informed alternate endpoints provides a means to achieve remediation goals that are permitted by regulations and are protective of human health and the environment. Alternate endpoints enable the establishment of a path for cleanup that may include intermediate remedial milestones and transition points and/or regulatory alternatives to standards-based remediation. A framework is presented that is centered around developing and refining conceptual models in conjunction with assessing risks and potential endpoints as part of a system-based assessment that integrates site data with scientific understanding of processes that control the distribution and transport of contaminants in the subsurface and pathways to receptors. This system-based assessment and subsequent implementation of the remediation strategy with appropriate monitoring are targeted at providing a holistic approach to addressing risks to human health and the environment. This holistic approach also enables effective predictive analysis of contaminant behavior to provide defensible criteria and data for making long-term decisions. Developing and implementing an alternate endpoint-based approach for remediation and waste site closure presents a number of challenges and opportunities. Categories of these challenges include scientific and technical, regulatory, institutional, and budget and resource allocation issues. Opportunities exist for developing and implementing systems-based approaches with respect to supportive characterization, monitoring, predictive modeling, and remediation approaches. (authors)

48 CFR 742.1170-4 - Progress reporting requirements and contract clause.

Science.gov (United States)

2010-10-01

... progress. (b) Because the cognizant technical officer is the individual most familiar with the contractor's performance, the contractor must submit the progress reports directly to the cognizant technical officer. The cognizant technical officer must review the reports and advise the contracting officer, in writing, of any...

Pacific Northwest Laboratory annual report for 1987 to the Assistant Secretary for Environment, Safety, and Health: Part 5: Environment, safety, health, and quality assurance

International Nuclear Information System (INIS)

Faust, L.G.; Steelman, B.L.; Selby, J.M.

1988-02-01

Part 5 of the 1987 Annual Report to the US Department of Energy's Assistant Secretary for Environment, Safety, and Health presents Pacific Northwest Laboratory's progress on work performed for the Office of Nuclear Safety, the Office of Environmental Guidance and Compliance, the Office of Environmental Audit, and the Office of National Environmental Policy Act Project Assistance. For each project, as identified by the Field Work Proposal, articles describe progress made during fiscal year 1987. Authors of these articles represent a broad spectrum of capabilities derived from five of the seven technical centers of the Laboratory, reflecting the interdisciplinary nature of the work

Instrumentation and Controls Division Progress report, July 1, 1992--June 30, 1994

Energy Technology Data Exchange (ETDEWEB)

McDonald, D.W.

1995-06-01

The Instrumentation and Controls (I&C) Division serves a national laboratory, and as such has an expansive domain: science, industry, and national defense. The core mission is to support the scientific apparatus of the Laboratory and all of the systems that protect the safety and health of people and the environment. Progress is reported for the five sections: photonics and measurements systems, electronic systems, signal processing, controls and systems integration, and technical support.

Nuclear structure theory. Annual technical progress report, July 1, 1975--September 30, 1976

International Nuclear Information System (INIS)

French, J.B.; Koltun, D.S.

1976-01-01

This report summarizes progress during the past year in the following areas of nuclear structure and reaction theory: Meson interactions with nucleons and nuclei, including elastic and inelastic scattering of pions, three-body theories of scattering and absorption of pions by deuterons, π-p bremsstrahlung, and multiple-excitation models for meson absorption by heavier nuclei. Studies of the inverse scattering problem including 1 S 0 nucleon-nucleon scattering; the relativistic two-body problem, particularly for relativistic effects at low energies: the unitary-pole expansion in nucleon-nucleon scattering with hard-core interactions. Statistical spectroscopy including: strength distributions and sum rules(both energy weighted and inverse energy weighted) for nuclear excitations; fluctuations and correlations in spectra, strengths and expectation values; studies of Garvey-Kelson and similar mass relationships; spectroscopy in huge spaces including spectral methods for renormalization of the interaction and for using (two + three)-body Skyrme interactions; technical aspects of operator averaging

Waste Isolation Safety Assessment Program. Technical progress report for FY-1978

Energy Technology Data Exchange (ETDEWEB)

Brandstetter, A.; Harwell, M.A.; Howes, B.W.; Benson, G.L.; Bradley, D.J.; Raymond, J.R.; Serne, R.J.; Schilling, A.H.

1979-07-01

Associated with commercial nuclear power production in the United States is the generation of potentially hazardous radioactive wastes. The Department of Energy (DOE) is seeking to develop nuclear waste isolation systems in geologic formations that will preclude contact with the biosphere of waste radionuclides in concentrations which are sufficient to cause deleterious impact on humans or their environments. Comprehensive analyses of specific isolation systems are needed to assess the expectations of meeting that objective. The Waste Isolation Safety Assessment Program (WISAP) has been established at the Pacific Northwest Laboratory (operated by Battelle Memorial Institute) for developing the capability of making those analyses. Progress on the following tasks is reported: release scenario analysis, waste form release rate analysis, release consequence analysis, sorption-desorption analysis, and societal acceptance analysis. (DC)

Knowledge Acquisition and Job Training for Advanced Technical Skills Using Immersive Virtual Environment

Science.gov (United States)

Watanuki, Keiichi; Kojima, Kazuyuki

The environment in which Japanese industry has achieved great respect is changing tremendously due to the globalization of world economies, while Asian countries are undergoing economic and technical development as well as benefiting from the advances in information technology. For example, in the design of custom-made casting products, a designer who lacks knowledge of casting may not be able to produce a good design. In order to obtain a good design and manufacturing result, it is necessary to equip the designer and manufacturer with a support system related to casting design, or a so-called knowledge transfer and creation system. This paper proposes a new virtual reality based knowledge acquisition and job training system for casting design, which is composed of the explicit and tacit knowledge transfer systems using synchronized multimedia and the knowledge internalization system using portable virtual environment. In our proposed system, the education content is displayed in the immersive virtual environment, whereby a trainee may experience work in the virtual site operation. Provided that the trainee has gained explicit and tacit knowledge of casting through the multimedia-based knowledge transfer system, the immersive virtual environment catalyzes the internalization of knowledge and also enables the trainee to gain tacit knowledge before undergoing on-the-job training at a real-time operation site.

Nuclear waste glass melter: an update of technical progress

International Nuclear Information System (INIS)

Brouns, R.A.; Hanson, M.S.

1984-08-01

The direct slurry-fed ceramic-lined melter is currently the reference US process for treating defense and civilian high-level liquid waste. Extensive nonradioactive pilot-scale testing at Pacific Northwest Laboratory (PNL) and Savannah River Laboratory has proven the process, defined operating parameters, and identified successful equipment design concepts. Programs at PNL continue to support several of the planned US vitrification plants through preparation of equipment designs and flowsheet testing. Current emphasis is on remotization of equipment, radioactive verification testing, and resolution of remaining technical issues. Development of this technology, technical status, and planned development activities are discussed. 9 references, 4 figures

48 CFR 2052.211-70 - Preparation of technical reports.

Science.gov (United States)

2010-10-01

....211-70 Preparation of technical reports. As prescribed at 2011.104-70(a), the contracting officer... Reports (JAN 1993) All technical reports required by Section C and all Technical Progress Reports required... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Preparation of technical...

Environmental impacts on technical products

International Nuclear Information System (INIS)

1991-01-01

The interaction between an object and its environment is examined by methods of environment simulation. With regard to possible synergisms, technical considerations and holistic thinking are essential. Environmental simulation is mainly concerned with questions of ability to function and the service life of technical products in their environment. The environmental simulation is used to discover cause/effect mechanisms in ageing and weathering processes. Questions of artificial ageing and speeded up time tests play a great part here. (orig.) [de

FY13 Annual Progress Report for SECA Core Technology Program

Energy Technology Data Exchange (ETDEWEB)

Stevenson, Jeffry W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Koeppel, Brian J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2014-01-31

This progress report covers technical work performed during fiscal year 2013 at PNNL under Field Work Proposal (FWP) 40552. The report highlights and documents technical progress in tasks related to advanced cell and stack component materials development and computational design and simulation.

The challenge of the future. Technical progress and ecological perspectives

International Nuclear Information System (INIS)

Jischa, M.F.

1993-01-01

The book introduces readers into the interrelated global problems population dynamics, energy supply, imminent climate catastrophe, environmetal pollution, finite resources and the conflict between the North and South. It encourages probing more deeply into the technical challenges of the future. The author demonstrates why economic and technical issues will soon be outstripped by questions of the environmental, human and social compatibility of new technologies. (orig./UA) [de

Scientific and technical report, 2000 of the IPSN

International Nuclear Information System (INIS)

2001-01-01

IPSN (Institut de Protection et de Surete Nucleaire) is responsible for dealing with all aspects in the evaluation of safety of nuclear installations involving the human factors. To achieve its objectives, it conducts its own research and development activities on these themes. This report highlights the most significant scientific and technical achievements of the Institut in 2000. Twenty eight reports are presented, grouped in eight sessions, each ones opened by a review paper: the reactors safety, the installations safety, the radioactive materials and transport safety, the public health, the environment protection, the radioactive wastes safety, the crisis management and the IPSN installations. The international research program Phebus PF is detailed, technical progresses concerning the steam generators nondestructive testing or the impact of automation on operator performance are also presented. One session deals with the criticality studies and risk assessment. The control and surveillance of nuclear materials form the subject of research programs and experiments as well as the transport safety. Concerning the public and environment protection inspections, epidemiological studies, radionuclides transportation and radio-contaminant behavior are reported. In the domain of the radioactive wastes safety, the deep underground storage and the model MELODIE are presented. Examples of accidents or the INEX2 exercise are also discussed. (A.L.B.)

The progress of RES environment in the most recent member states of the EU

Energy Technology Data Exchange (ETDEWEB)

Patlitzianas, Konstantinos [Management and Decision Support Systems Lab (EPU-NTUA), School of Electrical and Computer Engineering, National Technical University of Athens, 9, Iroon Polytechniou str., 15773, Athens (Greece); Karagounis, Konstantinos [National and Kapodistrian University of Athens, Dental School, 2 Thivon Str., Goudi, 11527 Athens (Greece)

2011-02-15

The most recent EU member states seem to have important Renewable Energy Sources (RES) potential. However, they have serious structural difficulties in development and integration of RES policies. Indeed, the balanced development of RES between the member states is urgent today. The penetration of the RES in these member states is related to the existence of an appropriate environment (political, economical, social, and technological). The current paper is based on an analytical review and specific PEST analysis aiming to assess the current RES environment and the progress so far in each of these most recent EU members. (author)

Periodic progress report, 6 months

DEFF Research Database (Denmark)

Juhl, Thomas Winther; Nielsen, Jakob Skov

This is the first progress report of the BriteEuram project named "High Power Laser Cutting for Heavy Industry" ("Powercut"). The report contains a summary of the objectives of the first period, an overview of the technical progress, a comparison between the planed and the accomplished work...

Decomposing productivity growth allowing efficiency gains and price-induced technical progress

NARCIS (Netherlands)

Oude Lansink, A.G.J.M.; Silva, E.; Stefanou, S.

2000-01-01

Time- and firm-specific output technical efficiency measures are generated within a price-induced technological change framework. The firm-specific production frontier incorporates past prices as an argument encouraging innovation and a time trend to account for exogenous technical change. The

PFBC HGCU Test Facility. Technical progress report No. 24, Third quarter, CY 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-10-01

This is the twenty-fourth and final Technical Progress Report submitted to the Department of Energy (DOE) in connection with the cooperative agreement between the DOE and Ohio Power Company for the Tidd PFBC Hot Gas Clean Up Test Facility. This report covers the work completed during the Third Quarter of CY 1995. All activity this quarter was directed toward the completion of the program final report. A draft copy of the final report was forwarded to DOE during this quarter, and DOE submitted their comments on the report to AEPSC. DOE requested that Westinghouse write an appendix to the report covering the performance of the fail-safe regenerator devices during Tad operation, and Westinghouse subsequently prepared the appendix. Additional DOE comments were incorporated into the report, and it will be issued in camera-ready form by the end of October, 1995, which is the program end date. Appendix 1 presents the results of filter candle posttest examination by Westinghouse performed on selected filter candles following final shutdown of the system.

Technical Progress Report

International Nuclear Information System (INIS)

Engelhardt, G.R.; MacDonald, D.D.

1999-01-01

During the past quartile (two month period) most attention has been concentrated on the problem of definition critical temperature at which ''wet'' corrosion first became operable. It has been shown that, in principle, ''wet'' corrosion processes can not be ignored for Yucca Mountain, even for initial times, when the temperature of the surface of containers is well above the boiling temperature of water for the prevailing conditions. This is because the surfaces are covered by highly hydrophilic oxides (e.g. Fe 2 O 3 , NiO, Cr 2 O 3 ) that will hydrate to the form of corresponding hydroxides, which are proton conductors, at least when in the ''wet'' condition. Because proton conduction and the presence of ''bound'' water are all that are required for the external environment to support metallic corrosion in either its general or localized form. Thus, the temperature of dehydration of the hydroxide, e.g. M(OH) 2 → MO + H 2 O(g), is a better criterion for the upper temperature limit for ''wet'' corrosion than is the boiling temperature of ''bulk'' water. During this first task, we have reviewed the existing thermodynamic data base for the dehydration of metal hydroxides and analytical expressions have been developed that allow the upper temperature limit to be estimated

Progress in the study on Pu chemical behavior under the geological environment

International Nuclear Information System (INIS)

Zhang Yingjie; Fan Xianhua

2006-01-01

The generation, characteristic, and disposal technology of the high level radioactive waste were discussed, and a progress in the study on the chemical behavior of Pu, a transuranic element possessing the long-term potential risk for the environment, under the geological repository was reviewed. Release behavior of Pu from the high level radioactive glass waste form, the basic chemical reactions of Pu possibly happening in groundwater, including solubility, complexation, redox reaction, and colloidal formation. Some proposals for the further work in China are also suggested. (authors)

Environment, safety and Health Progress Assessment of the Rocky Flats Plant

International Nuclear Information System (INIS)

1993-05-01

This report documents the result of the US Department of Energy's (DOE) Environment, Safety and Health (ES ampersand H) Progress Assessment of the DOE Rocky Flats Plant (RFP) in Golden, Colorado. The assessment, which was conducted during the period of May 17 through May 28, 1993, included a selective review of the ES ampersand H management systems and programs of the responsible DOE Headquarters Program Offices (Defense Programs (DP) and Environmental Restoration and Waste Management (EM)), the DOE Rocky Flats Office (RFO), and the site contractor, EG ampersand G Rocky Flats, Inc. (EG ampersand G). Despite the near constant state of flux under which RFP has been required to operate, the Progress Assessment Team has concluded that significant progress has been made in correcting the deficiencies identified in the 1989 Assessment and in responding responsibly to regulations, and DOE directives and guidance that have been issued since that time. The Team concluded that the improvements have been concentrated in the activities associated with plutonium facilities and in regulatory driven programs. Much remains to be done with respect to implementing on a sitewide basis those management systems that anchor an organization's pursuit of continuous ES ampersand H improvement. Furthermore the Team concluded that the pace of improvement has been constrained by a combination of factors that have limited the site's ability to manage change in the pursuit of sitewide ES ampersand H excellence

Trends and driving forces of ecological training and education in the context of ecological education environment of the technical university

OpenAIRE

Danilenkova V. A.

2017-01-01

common patterns of ecological training and education in the technical university are analyzed in this article, their descriptions are defined. Driving forces of ecological training and education in the context of ecological education environment are discovered and proved. According to conducted research the author makes a proposition to point out at ecological risks as driving forces, searching for which improves the efficiency and effectiveness of ecological education environment. The resear...

Environment, Safety and Health progress assessment of the Idaho National Engineering Laboratory (INEL)

International Nuclear Information System (INIS)

1993-08-01

The ES ampersand H Progress Assessments are part of the Department's continuous improvement process throughout DOE and its contractor organizations. The purpose of the INEL ES ampersand H Progress Assessment is to provide the Department with concise independent information on the following: (1) change in culture and attitude related to ES ampersand H activities; (2) progress and effectiveness of the ES ampersand H corrective actions resulting from previous Tiger Team Assessments; (3) adequacy and effectiveness of the ES ampersand H self-assessment programs of the DOE line organizations and the site management and operating contractor; and (4) effectiveness of DOE and contractor management structures, resources, and systems to effectively address ES ampersand H problems. It is not intended that this Progress Assessment be a comprehensive compliance assessments of ES ampersand H activities. The points of reference for assessing programs at the INEL were, for the most part, the 1991 INEL Tiger Team Assessment, the INEL Corrective Action Plan, and recent appraisals and self-assessments of INEL. Horizontal and vertical reviews of the following programmatic areas were conducted: Management: Corrective action program; self-assessment; oversight; directives, policies, and procedures; human resources management; and planning, budgeting, and resource allocation. Environment: Air quality management, surface water management, groundwater protection, and environmental radiation. Safety and Health: Construction safety, worker safety and OSHA, maintenance, packaging and transportation, site/facility safety review, and industrial hygiene

Appropriability, Technological Opportunity, Market Demand, and Technical Change - Empirical Evidence from Switzerland

OpenAIRE

Harabi, Najib

1992-01-01

The purpose of this paper is to analyze both theoretically and empirically those factors which underlay the - empirically observable - inter-industry differences in technical progress. At the theoretical level economists agree more and more that technical progress can be explained at the industry level by the following three factors: (1) the technological opportunities, (2) the appropriability conditions, meaning the ability to capture and protect the results of technical innovations and (3) ...

Fusion Reactor Materials semiannual progress report for the period ending March 31, 1992

International Nuclear Information System (INIS)

1992-07-01

This is the twelfth in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following progress reports: Alloy Development for Irradiation Performance; Damage Analysis and Fundamental Studies; and Special Purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials programs being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide

Fusion Reactor Materials semiannual progress report for the period ending March 31, 1992

Energy Technology Data Exchange (ETDEWEB)

1992-07-01

This is the twelfth in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following progress reports: Alloy Development for Irradiation Performance; Damage Analysis and Fundamental Studies; and Special Purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials programs being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide.

Fusion reactor materials semiannual progress report for the period ending March 31, 1991

Energy Technology Data Exchange (ETDEWEB)

none,

1991-07-01

This is the tenth in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following progress reports: alloy development for irradiation performance; damage analysis and fundamental studies; special purpose materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials program being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of program participants, and to provide a means of communicating the efforts of materials scientists to the test of the fusion community, both nationally and worldwide.

Fusion reactor materials semiannual progress report for the period ending March 31, 1991

International Nuclear Information System (INIS)

1991-07-01

This is the tenth in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following progress reports: alloy development for irradiation performance; damage analysis and fundamental studies; special purpose materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials program being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of program participants, and to provide a means of communicating the efforts of materials scientists to the test of the fusion community, both nationally and worldwide

Global Chance and nuclear energy. Ecology, environment and media. Science, progress and development

International Nuclear Information System (INIS)

1993-01-01

A first set of contributions discusses the outcomes of the French electronuclear programme and the place of Superphenix in the plutonium management. The second set of contributions proposes comments and critics on three books about the environment (more particularly about the new ecological order, about the greenhouse effect as a world manipulation, and about the limits of scientific expertise on climate). The last article proposes a synthesis of a meeting about the relationship between science, progress and development

High temperature turbine technology program. Phase II. Technology test and support studies. Annual technical progress report, January 1, 1979-December 31, 1979

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

Work performed on the High Temperature Turbine Technology Program, Phase II - Technology Test and Support Studies during the period from January 1, 1979 through December 31, 1979 is summarized. Objectives of the program elements as well as technical progress and problems encountered during this Phase II annual reporting period are presented. Progress on design, fabrication and checkout of test facilities and test rigs is described. LP turbine cascade tests were concluded. 350 hours of testing were conducted on the LP rig engine first with clean distillate fuel and then with fly ash particulates injected into the hot gas stream. Design and fabrication of the turbine spool technology rig components are described. TSTR 60/sup 0/ sector combustor rig fabrication and testing are reviewed. Progress in the design and fabrication of TSTR cascade rig components for operation on both distillate fuel and low Btu gas is described. The new coal-derived gaseous fuel synthesizing facility is reviewed. Results and future plans for the supporting metallurgical programs are discussed.

GPHS-RTGs in support of the Cassini mission. Semi annual technical progress report, 2 October 1995--31 March 1996

International Nuclear Information System (INIS)

1996-01-01

The technical progress achieved during the period 2 October 1995 through 31 March 1996 on Contract No. DE-AC03-91SF18852, Radioisotope Generators and Ancillary Activities is described herein. This report is organized by the program task structure as follows: spacecraft integration and liaison; engineering support; safety; qualified unicouple fabrication; ETG fabrication, assembly, and test; ground support equipment (GSE); RTG shipping and launch support; designs, reviews, and mission applications; project management, quality assurance and reliability, contract changes, non-capital CAGO acquisition, and CAGO maintenance; contract acquired government-owned property (CAGO) acquisition; and program calendars

Fusion materials semiannual progress report for the period ending March 31, 1995

International Nuclear Information System (INIS)

1995-07-01

This is the eighteenth in a series of semiannual technical progress reports on fusion materials. This report combines research and development activities which were previously reported separately in the following progress reports: sm-bullet Alloy Development for Irradiation Performance. sm-bullet Damage Analysis and Fundamental Studies. sm-bullet Special Purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials programs being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide. This report has been compiled and edited under the guidance of A.F. Rowcliffe by Gabrielle Burn, Oak Ridge National Laboratory. Their efforts, and the efforts of the many persons who made technical contributions, are gratefully acknowledged

Fusion materials semiannual progress report for the period ending March 31, 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

This is the eighteenth in a series of semiannual technical progress reports on fusion materials. This report combines research and development activities which were previously reported separately in the following progress reports: {sm_bullet} Alloy Development for Irradiation Performance. {sm_bullet} Damage Analysis and Fundamental Studies. {sm_bullet} Special Purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials programs being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide. This report has been compiled and edited under the guidance of A.F. Rowcliffe by Gabrielle Burn, Oak Ridge National Laboratory. Their efforts, and the efforts of the many persons who made technical contributions, are gratefully acknowledged.

Technical Training: Technical Training Seminar

CERN Multimedia

2004-01-01

TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

Technical efficiency in milk production in underdeveloped production environment of India*.

Science.gov (United States)

Bardhan, Dwaipayan; Sharma, Murari Lal

2013-12-01

The study was undertaken in Kumaon division of Uttarakhand state of India with the objective of estimating technical efficiency in milk production across different herd-size category households and factors influencing it. Total of 60 farm households having representation from different herd-size categories drawn from six randomly selected villages of plain and hilly regions of the division constituted the ultimate sampling units of the study. Stochastic frontier production function analysis was used to estimate the technical efficiency in milk production. Multivariate regression equations were fitted taking technical efficiency index as the regressand to identify the factors significantly influencing technical efficiency in milk production. The study revealed that variation in output across farms in the study area was due to difference in their technical efficiency levels. However, it was interesting to note that smallholder producers were more technically efficient in milk production than their larger counterparts, especially in the plains. Apart from herd size, intensity of market participation had significant and positive impact on technical efficiency in the plains. This provides definite indication that increasing the level of commercialization of dairy farms would have beneficial impact on their production efficiency.

ISABELLE: a progress report

Energy Technology Data Exchange (ETDEWEB)

Hahn, H

1980-01-01

This paper discusses the ISABELLE project, which has the objective of constructing a high-energy proton colliding beam facility at Brookhaven National Laboratory. The major technical features of the intersecting storage accelerators with their projected performance are described. Application of over 1000 superconducting magnets in the two rings represents the salient characteristic of the machine. The status of the entire project, the technical progress made so far, and difficulties encountered are reviewed.

ISABELLE: a progress report

International Nuclear Information System (INIS)

Hahn, H.

1980-01-01

This paper discusses the ISABELLE project, which has the objective of constructing a high-energy proton colliding beam facility at Brookhaven National Laboratory. The major technical features of the intersecting storage accelerators with their projected performance are described. Application of over 1000 superconducting magnets in the two rings represents the salient characteristic of the machine. The status of the entire project, the technical progress made so far, and difficulties encountered are reviewed

The general technical regulation and the standardization

International Nuclear Information System (INIS)

Laverie, Michel; Houze, Christian; Lebouleux, Philippe

1980-01-01

Through a certain number of procedures, the thorough appreciation of the safety of a nuclear installation relies more on a specific appreciation taking into account the references as a whole, than on a technical regulation which claims to cover all the problems. Nevertheless, a French technical regulation structure regarding the safety domain must be built up progressively. The authors consider the principles of such a structure, and together they make the inventory of the works, finished, in progress or contemplated. The description of this specifically French approach emphazises the multiple and complementary forms given to statutory implements [fr

Non-technical constraints to eradication: the Italian experience.

Science.gov (United States)

Moda, Giuliana

2006-02-25

Although technical constraints to eradication of bovine tuberculosis are well-recognised, non-technical constraints can also delay progress towards eradication, leading to inefficiency and increased programme costs. This paper seeks to analyse the main non-technical constraints that can interfere with the successful implementation of tuberculosis eradication plans, based on experiences from an area of high tuberculosis prevalence in Regione Piemonte, Italy. The main social and economic constraints faced in the past 20 years are reviewed, including a social reluctance to recognise the importance of seeking eradication as the goal of disease control, effective communication of technical issues, the training and the organization of veterinary services, the relationship between the regional authority and farmers and their representatives, and data management and epidemiological reporting. The paper analyses and discusses the solutions that were applied in Regione Piemonte and the benefits that were obtained. Tuberculosis eradication plans are one of the most difficult tasks of the Veterinary Animal Health Services, and non-technical constraints must be considered when progress towards eradication is less than expected. Organizational and managerial resources can help to overcome social or economic obstacles, provided the veterinary profession is willing to address technical, but also non-technical, constraints to eradication.

TECHNICAL COORDINATION

CERN Multimedia

A. Ball and W. Zeuner

2011-01-01

In this report we will review the main achievements of the Technical Stop and the progress of several centrally-managed projects to support CMS operation and maintenance and prepare the way for upgrades. Overview of the extended Technical Stop  The principal objectives of the extended Technical Stop affecting the detector itself were the installation of the TOTEM T1 telescopes on both ends, the readjustment of the alignment link-disk in YE-2, the replacement of the light-guide sleeves for all PMs of both HFs, and some repairs on TOTEM T2 and CASTOR. The most significant tasks were, however, concentrated on the supporting infrastructure. A detailed line-by-line leak search was performed in the C6F14 cooling system of the Tracker, followed by the installation of variable-frequency drives on the pump motors of the SS1 and SS2 tracker cooling plants to reduce pressure transients during start-up. In the electrical system, larger harmonic filters were installed in ...

Mate choice for genetic quality when environments vary: suggestions for empirical progress.

Science.gov (United States)

Bussière, Luc F; Hunt, John; Stölting, Kai N; Jennions, Michael D; Brooks, Robert

2008-09-01

Mate choice for good-genes remains one of the most controversial evolutionary processes ever proposed. This is partly because strong directional choice should theoretically deplete the genetic variation that explains the evolution of this type of female mating preference (the so-called lek paradox). Moreover, good-genes benefits are generally assumed to be too small to outweigh opposing direct selection on females. Here, we review recent progress in the study of mate choice for genetic quality, focussing particularly on the potential for genotype by environment interactions (GEIs) to rescue additive genetic variation for quality, and thereby resolve the lek paradox. We raise five questions that we think will stimulate empirical progress in this field, and suggest directions for research in each area: (1) How is condition-dependence affected by environmental variation? (2) How important are GEIs for maintaining additive genetic variance in condition? (3) How much do GEIs reduce the signalling value of male condition? (4) How does GEI affect the multivariate version of the lek paradox? (5) Have mating biases for high-condition males evolved because of indirect benefits?

Effects of humic substances on the migration of radionuclides: complexation and transport of actinides. First technical progress report (work period 01.97 - 12.97)

International Nuclear Information System (INIS)

Buckau, G.

1998-08-01

The present report describes progress within the first year of the EC-project 'Effects of Humic Substances on the Migration of Radionuclides: Complexation and Transport of Actinides'. The project is conducted within the EC-Cluster 'Radionuclide Transport/Retardation Processes'. Contrary to formal requirements of the Commission, this report with a great deal of detail is established already after one year of project work. It is scheduled to be followed by a second technical progress report covering the second year of the project. In agreement with the contractual obligations a final report of similar technical detail will also be generated. The report contains an executive summary written by the coordinator (FZK/INE) with strong support from the other three task leaders (BGS, CEA-SGC and RMC-E). More detailed results are given by individual contributions of the project partners in 13 annexes. In the executive summary report the origin of results presented is given, also serving as guidance for finding more detailed results in the annexes. Not all results are discussed or referred to in the executive summary report and thus readers with a deeper interest also need to consult the annexes. (orig.)

Fusion materials semiannual progress report for the period ending September 30, 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-04-01

This is the sixteenth in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following Progress reports: Alloy Development for Irradiation Performance; Damage Analysis and Fundamental Studies; and Special Purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials programs being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide. The individual papers in this paper have been cataloged separately elsewhere.

Information management architecture for an integrated computing environment for the Environmental Restoration Program. Environmental Restoration Program, Volume 3, Interim technical architecture

International Nuclear Information System (INIS)

1994-09-01

This third volume of the Information Management Architecture for an Integrated Computing Environment for the Environmental Restoration Program--the Interim Technical Architecture (TA) (referred to throughout the remainder of this document as the ER TA)--represents a key milestone in establishing a coordinated information management environment in which information initiatives can be pursued with the confidence that redundancy and inconsistencies will be held to a minimum. This architecture is intended to be used as a reference by anyone whose responsibilities include the acquisition or development of information technology for use by the ER Program. The interim ER TA provides technical guidance at three levels. At the highest level, the technical architecture provides an overall computing philosophy or direction. At this level, the guidance does not address specific technologies or products but addresses more general concepts, such as the use of open systems, modular architectures, graphical user interfaces, and architecture-based development. At the next level, the technical architecture provides specific information technology recommendations regarding a wide variety of specific technologies. These technologies include computing hardware, operating systems, communications software, database management software, application development software, and personal productivity software, among others. These recommendations range from the adoption of specific industry or Martin Marietta Energy Systems, Inc. (Energy Systems) standards to the specification of individual products. At the third level, the architecture provides guidance regarding implementation strategies for the recommended technologies that can be applied to individual projects and to the ER Program as a whole

Pacific Northwest Laboratory annual report for 1989 to the Assistant Secretary for Environment, Safety, and Health - Part 5: Environment, Safety, Health, and Quality Assurance

Energy Technology Data Exchange (ETDEWEB)

Faust, L.G.; Doctor, P.G.; Selby, J.M.

1990-04-01

Part 5 of the 1989 Annual Report to the US Department of Energy's Assistant Secretary for Environment, Safety, and Health presents Pacific Northwest Laboratory's progress on work performed for the Office of Environmental Guidance and Compliance, the Office of Environmental Audit, the Office of National Environmental Policy Act Project Assistance, the Office of Nuclear Safety, the Office of Safety Compliance, and the Office of Policy and Standards. For each project, as identified by the Field Work Proposal, there is an article describing progress made during fiscal year 1989. Authors of these articles represent a broad spectrum of capabilities derived from five of the seven technical centers of the Laboratory, reflecting the interdisciplinary nature of the work. 35 refs., 1 fig.

Technical experiences of implementing a wireless tracking and facial biometric verification system for a clinical environment

Science.gov (United States)

Liu, Brent; Lee, Jasper; Documet, Jorge; Guo, Bing; King, Nelson; Huang, H. K.

2006-03-01

By implementing a tracking and verification system, clinical facilities can effectively monitor workflow and heighten information security in today's growing demand towards digital imaging informatics. This paper presents the technical design and implementation experiences encountered during the development of a Location Tracking and Verification System (LTVS) for a clinical environment. LTVS integrates facial biometrics with wireless tracking so that administrators can manage and monitor patient and staff through a web-based application. Implementation challenges fall into three main areas: 1) Development and Integration, 2) Calibration and Optimization of Wi-Fi Tracking System, and 3) Clinical Implementation. An initial prototype LTVS has been implemented within USC's Healthcare Consultation Center II Outpatient Facility, which currently has a fully digital imaging department environment with integrated HIS/RIS/PACS/VR (Voice Recognition).

Progress Report Oct to Dec 1975(2)

International Nuclear Information System (INIS)

1976-01-01

Progress report NO. 2 of Tehran Nuclear Research Centre outlines a brief description of the progress made in each section of the centre. A complete list of dissertations for Master's degrees studied at the Nuclear Research Centre and a list of new technical employee are given at the beginning of the report. Research activities in the third section include, isotope separation, laser research, radiation chemistry, reactor management, environmental research, neutron physics, reactor engineering, and nuclear medicine. The fourth section deals with education and training; technical support and health physics are discussed in sections five and six respectively

Fusion reactor materials semiannual progress report for the period ending March 31, 1993

International Nuclear Information System (INIS)

1993-07-01

This is the fourteenth in a series of semiannual technical progress reports on fusion reactor materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials programs being conducted in support of the Magnetic Fusion Energy Program of the US Depart of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. Separate abstracts were prepared for each individual section

Fusion reactor materials semiannual progress report for the period ending March 31, 1993

Energy Technology Data Exchange (ETDEWEB)

1993-07-01

This is the fourteenth in a series of semiannual technical progress reports on fusion reactor materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials programs being conducted in support of the Magnetic Fusion Energy Program of the US Depart of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. Separate abstracts were prepared for each individual section.

A socio-technical approach to teaching the social impacts of technological development

DEFF Research Database (Denmark)

Jensen, Per Langå; Broberg, Ole

2001-01-01

This paper describes a socio-technical approach to teach work environment in an en-gineering education as an alternative to a science-based presentation of each potential harmful factor. The socio-technical approach emphasizes that work environment must be understood in a social context and that ......This paper describes a socio-technical approach to teach work environment in an en-gineering education as an alternative to a science-based presentation of each potential harmful factor. The socio-technical approach emphasizes that work environment must be understood in a social context...

Progress report for '89

International Nuclear Information System (INIS)

Podest, M.

1990-08-01

The 1989 Progress Report presents the most important scientific and technical achievements of the Nuclear Research Institute's research work. Some specialized products prepared at or fabricated by the NRI are mentioned as well. (author). 24 figs., 8 tabs., 101 refs

C-Mod Collaboration Informal Technical Progress Report

International Nuclear Information System (INIS)

Kenneth W. Gentle

2007-01-01

The aims of the collaboration have not changed. A specific list of tasks was agreed upon during the Fall of 2006 in preparation for the 2007 C-Mod campaign by Earl Marmar, Head of the Alcator Project, Kenneth Gentle, Principal Investigator, and William Rowan, Collaboration Coordinator with the facilitation of Adam Rosenberg (DOE grant monitor for the collaboration). The activities follow the list of tasks and are discussed in this progress report

Technical progress report of biological research on the Volcanic Island Surtsey and its environs for the period 1965--1978

Energy Technology Data Exchange (ETDEWEB)

Fridriksson, S.

1978-01-01

Progress is reported on the following research projects: changes in shoreline and surface of the island due to volcanic activity; colonization of microorganisms, algae, lichens, and vascular plants; introduction of insects and other arthropods by wind, water, and man; transport of invertebrates to the island by flotsam of the sea; species and nesting habits of birds on the island; behavior of seals on beaches of the island; and future trends of Surtsey ecosystems. (HLW)

Aerospace Systems Design in NASA's Collaborative Engineering Environment

Science.gov (United States)

Monell, Donald W.; Piland, William M.

1999-01-01

Past designs of complex aerospace systems involved an environment consisting of collocated design teams with project managers, technical discipline experts, and other experts (e.g. manufacturing and systems operations). These experts were generally qualified only on the basis of past design experience and typically had access to a limited set of integrated analysis tools. These environments provided less than desirable design fidelity, often lead to the inability of assessing critical programmatic and technical issues (e.g., cost risk, technical impacts), and generally derived a design that was not necessarily optimized across the entire system. The continually changing, modern aerospace industry demands systems design processes that involve the best talent available (no matter where it resides) and access to the best design and analysis tools. A solution to these demands involves a design environment referred to as collaborative engineering. The collaborative engineering environment evolving within the National Aeronautics and Space Administration (NASA) is a capability that enables the Agency's engineering infrastructure to interact and use the best state-of-the-art tools and data across organizational boundaries. Using collaborative engineering, the collocated team is replaced with an interactive team structure where the team members are geographically distributed and the best engineering talent can be applied to the design effort regardless of physical location. In addition, a more efficient, higher quality design product is delivered by bringing together the best engineering talent with more up-to-date design and analysis tools. These tools are focused on interactive, multidisciplinary design and analysis with emphasis on the complete life cycle of the system, and they include nontraditional, integrated tools for life cycle cost estimation and risk assessment. NASA has made substantial progress during the last two years in developing a collaborative

Aerospace Systems Design in NASA's Collaborative Engineering Environment

Science.gov (United States)

Monell, Donald W.; Piland, William M.

2000-07-01

Past designs of complex aerospace systems involved an environment consisting of collocated design teams with project managers, technical discipline experts, and other experts (e.g., manufacturing and systems operations). These experts were generally qualified only on the basis of past design experience and typically had access to a limited set of integrated analysis tools. These environments provided less than desirable design fidelity, often led to the inability of assessing critical programmatic and technical issues (e.g., cost, risk, technical impacts), and generally derived a design that was not necessarily optimized across the entire system. The continually changing, modern aerospace industry demands systems design processes that involve the best talent available (no matter where it resides) and access to the best design and analysis tools. A solution to these demands involves a design environment referred to as collaborative engineering. The collaborative engineering environment evolving within the National Aeronautics and Space Administration (NASA) is a capability that enables the Agency's engineering infrastructure to interact and use the best state-of-the-art tools and data across organizational boundaries. Using collaborative engineering, the collocated team is replaced with an interactive team structure where the team members are geographically distributed and the best engineering talent can be applied to the design effort regardless of physical location. In addition, a more efficient, higher quality design product is delivered by bringing together the best engineering talent with more up-to-date design and analysis tools. These tools are focused on interactive, multidisciplinary design and analysis with emphasis on the complete life cycle of the system, and they include nontraditional, integrated tools for life cycle cost estimation and risk assessment. NASA has made substantial progress during the last two years in developing a collaborative

Progress report 1979

International Nuclear Information System (INIS)

1980-12-01

This progress report deals with technical and research work done at the AAEC Research Establishment in the twelve month period ending September 30, 1979. Work done in the following research divisions is reported: Applied Maths and Computing, Chemical Technology, Engineering Research, Environmental Science, Instrumentation and Control, Isotope, Materials and Physics

Study on advanced systematic function of the JNC geological disposal technical information integration system. Research document

International Nuclear Information System (INIS)

Ishihara, Yoshinao; Fukui, Hiroshi; Sagawa, Hiroshi; Matsunaga, Kenichi; Ito Takaya

2004-02-01

In this study, while attaining systematization about the technical know-how mutually utilized between geology environmental field, disposal technology (design) field and safety assessment field, the share function of general information in which the formation of an information share and the use promotion between the technical information management databases built for every field were aimed at as an advancement of the function of JNC Geological Disposal Technical Information Integration System considered, and the system function for realizing considered in integration of technical information. (1) Since the concrete information about geology environment which is gradually updated with progress of stratum disposal research, or increases in reflected suitable for research of design and safety assessment. After arranging the form suitable for systematizing technical information, while arranging the technical information in both the fields of design and safety assessment with the form of two classes based on tasks/works, it systematized planning adjustment about delivery of technical information with geology environmental field. (2) In order to aim at integration of 3-fields technical information of geological disposal, based on the examination result of systematization of technical information, the function of mutual use of the information managed in two or more databases was considered. Moreover, while considering system functions, such as management of the use history of technical information, connection of information use, and a notice of common information, the system operation windows in consideration of the ease of operation was examined. (author)

Progress report [of] Technical Physics Division

International Nuclear Information System (INIS)

Vijendran, P.; Deshpande, R.Y.

1975-01-01

Activities of the Technical Physics Division of the Bhabha Atomic Research Centre, Bombay, over the last few years are reported. This division is engaged in developing various technologies supporting the development of nuclear technology. The various fields in which development is actively being carried out are : (i) vacuum technology, (ii) mass spectrometry, (iii) crystal technology, (iv) cryogenics, and (v) magnet technology. For surface studies, the field emission microscope and the Auger electron spectrometer and other types of spectrometers have been devised and perfected. Electromagnets of requisite strength to be used in MHD programme and NMR instruments are being fabricated. Various crystals such as NaI(Tl), Ge, Fluorides, etc. required as windows and prisms in X and gamma-ray spectroscopy, have been grown. In the cryogenics field, expansion engines required for air liquefaction plants, vacuum insulated dewars, helium gas thermometers etc. have been constructed. In addition to the above, the Division provides consultancy and training to personnel from various institutions and laboratories. Equipment and systems perfected are transferred to commercial organizations for regular production. (A.K.)

The development of an e-learning software, ''Technical ethics''

International Nuclear Information System (INIS)

Matsue, Kazuki; Madarame, Haruki; Okamoto, Koji

2004-01-01

For the engineers and researchers, it is coming to the time when they are asked not only technical progress but also their ethics view. In this study, I aim to develop of the education software ''Technical Ethics'', which cultivates ethics view of the engineers. (author)

Creating technical heritage object replicas in a virtual environment

Science.gov (United States)

Egorova, Olga; Shcherbinin, Dmitry

2016-03-01

The paper presents innovative informatics methods for creating virtual technical heritage replicas, which are of significant scientific and practical importance not only to researchers but to the public in general. By performing 3D modeling and animation of aircrafts, spaceships, architectural-engineering buildings, and other technical objects, the process of learning is achieved while promoting the preservation of the replicas for future generations. Modern approaches based on the wide usage of computer technologies attract a greater number of young people to explore the history of science and technology and renew their interest in the field of mechanical engineering.

Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

John Ross

2003-04-30

The Final Technical Report summarizes research accomplishments and Publications in the period of 5/1/99 to 4/30/03 done on the grant. Extensive progress was made in the period covered by this report in the areas of chemical kinetics of non-linear systems; spatial structures, reaction - diffusion systems, and thermodynamic and stochastic theory of electrochemical and general systems.

Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. An extra issue: background of the geological disposal

International Nuclear Information System (INIS)

1999-11-01

Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the geological disposal concept for high-level radioactive wastes (HLW) in Japan. The present document, an extra issue of the progress report, was prepared for the expected readers of the report to have background information on the geological disposal. Thus it gives information about (1) generation of high-level radioactive wastes, (2) history of plans proposed for HLW disposal in Japan, and (3) procedure until the geological disposal plan is finally adopted and basic future schedules. It further discusses on such problems in HLW treatment and disposal, as for example a problem of reliable safety for a very long period. (Ohno, S.)

GT-MHR COMMERCIALZATION STUDY. TECHNICAL PROGRESS AND COST MANAGEMENT REPORT FOR THE PERIOD JUNE 1 THROUGH JUNE 30, 2003

International Nuclear Information System (INIS)

SHENOY, A.S.

2003-01-01

A271 GT-MHR COMMERCIALZATION STUDY TECHNICAL PROGRESS AND COST MANAGEMENT REPORT FOR THE PERIOD JUNE 1 THROUGH JUNE 30, 2003. Petten was provided with irradiation dimensional change data for both fuel compacts and H-451 graphite for design of the graphite sleeves that hold the fuel compacts to be irradiated in HFR-EU2. The Fuel Sample Product Specification for the Fuel Performance Irradiation Test Capsule MHR-2 was completed and approved. A Work Breakdown Structure was prepared for the development and qualification of advanced coated-particle fuels capable of meeting anticipated fuel performance requirements and work was initiated on preparation of schedules and a cost estimates for the test matrices

Fusion materials semiannual progress report for the period ending June 30, 1998

Energy Technology Data Exchange (ETDEWEB)

Burn, G. [ed.] [comp.

1998-09-01

This is the twenty-fourth in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components. This effort forms one element of the materials program being conducted in support of the Fusion Energy Sciences Program of the US Department of Energy. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

Fusion materials semiannual progress report for the period ending June 30, 1998

International Nuclear Information System (INIS)

Burn, G.

1998-09-01

This is the twenty-fourth in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components. This effort forms one element of the materials program being conducted in support of the Fusion Energy Sciences Program of the US Department of Energy. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database

Electrical and Electronics Technical Team Roadmap

Energy Technology Data Exchange (ETDEWEB)

None

2013-06-01

The Electrical and Electronics Technical Team’s (EETT's) mission is to enable cost-effective, smaller, lighter, and efficient power electronics and electric motors for electric traction drive systems (ETDSs) while maintaining performance of internal combustion engine (ICE)-based vehicles. The EETT also identifies technology gaps, establishes R&D targets, develops a roadmap to achieve technical targets and goals, and evaluates the R&D progress toward meeting the established R&D targets and goals.

The French Space Operation Act: Technical Regulations

Science.gov (United States)

Trinchero, J. P.; Lazare, B.

2010-09-01

The French Space Operation Act(FSOA) stipulates that a prime objective of the National technical regulations is to protect people, property, public health and the environment. Compliance with these technical regulations is mandatory as of 10 December 2010 for space operations by French space operators and for space operations from French territory. The space safety requirements and regulations governing procedures are based on national and international best practices and experience. A critical design review of the space system and procedures shall be carried out by the applicant, in order to verify compliance with the Technical Regulations. An independent technical assessment of the operation is delegated to CNES. The principles applied when drafting technical regulations are as follows: requirements must as far as possible establish the rules according to the objective to be obtained, rather than how it is to be achieved; requirements must give preference to international standards recognised as being the state of the art; requirements must take previous experience into account. Technical regulations are divided into three sections covering common requirements for the launch, control and return of a space object. A dedicated section will cover specific rules to be applied at the Guiana Space Centre. The main topics addressed by the technical regulations are: operator safety management system; study of risks to people, property, public health and the Earth’s environment; impact study on the outer space environment: space debris generated by the operation; planetary protection.

ATR Technical Specification Upgrade Program

International Nuclear Information System (INIS)

McCracken, R.T.; Durney, J.L.; Freund, G.A.

1990-01-01

The Advanced Test Reactor (ATR) is a 250 MW, uranium-aluminum fueled test reactor which began full power operation in 1969. The initial operation was controlled by an Operating Limits document based on the original Safety Analysis Report. Additional safety bases were later developed to support Technical Specifications which were approved and implemented in 1977. The Technical Specifications which were initially developed with content and format specified in ANSI/ANS--15.1, ''The Development of Technical Specifications for Research Reactors.'' The safety basis documentation and the Technical Specifications have been updated as required to maintain them current with the ATR facility configuration. All revisions have been made with a content, format and style consistent with the original. A major, two-phase program to upgrade the content, format and style is in progress. This paper describes the first phase of this program

Technical progress report, 1 April-30 June 1981

Energy Technology Data Exchange (ETDEWEB)

None

1981-01-01

This report describes the technical accomplishments during the quarter ending June 1981, on the commercial nuclear waste management programs under the direction of the Office of Nuclear Waste Isolation (ONWI). The ONWI program is organized into 8 tasks entitled: systems, waste package, site, repository, regulatory and institutional, test facilities and excavations, land acquisition, and program management. Principal investigators in each of these areas have submitted summaries of quarterly highlights for inclusion in this report. Separate abstracts have been prepared for 5 of these tasks for inclusion in the Energy Data Base. (DMC)

Technical progress of nuclear energy: economic and environmental prospects

International Nuclear Information System (INIS)

Naudet, G.

1994-01-01

This document deals with three different aspects of the nuclear energy: first the operating and economic performances of nuclear power plants in the world, the French nuclear competitiveness. Then, the technical and economic perspectives about reactors and fuels cycle and the advantages towards atmospheric pollution are discussed to favour a new worldwide nuclear development. (TEC). 8 refs., 4 figs., 6 tabs

A guide to technical information regarding TMI-2 [Three Mile Island Unit 2

International Nuclear Information System (INIS)

Aucliar, K.D.; Epler, J.

1988-01-01

A considerable amount of information has been obtained and documented concerning the March 1979 accident and its consequences at the Three Mile Island Unit 2 (TMI-2) nuclear generating station. The information has been essential in (a) understanding the nature, progression, and extent of the damage from the accident; (b) assessing the effects of this damage on the plant's facilities, systems, equipment, and surrounding environment; and (c) planning, preparation, performance, and evaluation of the accident recovery activities. The composite of all of this literature is the technical information available at TMI-2. The issues raised by the accident are far-reaching and complex, and the technical information has usefulness beyond its application at TMI-2. Issues raised as a result of the accident pose questions that are technical, legal, financial, and political in nature. However, because the quantity of information is vast, this paper focuses on the technical data generated as a result of the TMI-2 accident recovery activities. Most of the written information generated during the TMI-2 recovery program was provided to meet the needs of the various key participants in the recovery. The informational needs of these groups varied widely; consequently, their motivation for record retention, content, and structure revolved around serving those needs. This paper provides some guidance to those researchers interested in investigating technical data as it relates to TMI-2

Analysis on the development of scientific and technical information under new competitive environment

International Nuclear Information System (INIS)

Li Tao

2010-01-01

The current external environment of information work has undergone profound changes. The world competition in Military fields, the development of national economy and the applications of high-technologies put forward higher requirements to intelligence work. Under the environment of global information integration, 'eyes and ears' roles of nuclear scientific and technical information will be more highlighted. In this context, we believe that the way of nuclear sci-tech information development should be focused on comprehensive research and be based on the building of information resources and advanced information technology methods, forming an integrated service system with capabilities of rapid resources, decision support, information assurance and sustainable development. The goal of nuclear sci-tech information development should be to serve the development of nuclear power and the popularization and application of nuclear technology in the fields of national economy, to implement the strategy of 'integrated intelligence support', to ensure the formation of rapid response capability, to enhance capabilities of decision support and science and technology development guidance, to build digital information resources and to constantly promote the research on network collaboration. This paper analyzes the characteristics of nuclear sci-tech information under new competitive environment, describes the ideas and goals of its development and proposes the way to achieve these goals. In order to provide the information support and service with the characteristics of rapid response, high quality and high efficiency, the paper also puts forward that under the new environment, we should optimize the service system, extend service functions, transform service mode, speed up the transformation on intelligence work, adjust and optimize business content and structure, promote business process re-engineering, and pay equal attention to 'ensuring demands' and 'guiding the future

Self vs expert assessment of technical and non-technical skills in high fidelity simulation.

Science.gov (United States)

Arora, Sonal; Miskovic, Danilo; Hull, Louise; Moorthy, Krishna; Aggarwal, Rajesh; Johannsson, Helgi; Gautama, Sanjay; Kneebone, Roger; Sevdalis, Nick

2011-10-01

Accurate assessment is imperative for learning, feedback and progression. The aim of this study was to examine whether surgeons can accurately self-assess their technical and nontechnical skills compared with expert faculty members' assessments. Twenty-five surgeons performed a laparoscopic cholecystectomy (LC) in a simulated operating room. Technical and nontechnical performance was assessed by participants and faculty members using the validated Objective Structured Assessment of Technical Skills (OSATS) and the Non-Technical Skills for Surgeons scale (NOTSS). Assessment of technical performance correlated between self and faculty members' ratings for experienced (median score, 30.0 vs 31.0; ρ = .831; P = .001) and inexperienced (median score, 22.0 vs 28.0; ρ = .761; P = .003) surgeons. Assessment of nontechnical skills between self and faculty members did not correlate for experienced surgeons (median score, 8.0 vs 10.5; ρ = -.375; P = .229) or their more inexperienced counterparts (median score, 9.0 vs 7.0; ρ = -.018; P = .953). Surgeons can accurately self-assess their technical skills in virtual reality LC. Conversely, formal assessment with faculty members' input is required for nontechnical skills, for which surgeons lack insight into their behaviours. Copyright © 2011 Elsevier Inc. All rights reserved.

Fusion Materials Semiannual Progress Report for Period Ending December 31, 1998

Energy Technology Data Exchange (ETDEWEB)

Rowcliff, A.F.; Burn, G.

1999-04-01

This is the twenty-fifth in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components. This effort forms one element of the materials program being conducted in support of the Fusion Energy Sciences Program of the U.S. Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately.

[Environment, Trauma and Technical Innovations: Three Links Between Donald W. Winnicott and Sándor Ferenczi].

Science.gov (United States)

Gutiérrez-Peláez, Miguel; Herrera-Pardo, Emilio

Throughout this paper, the theoretical and clinical approaches of D.W. Winnicott are reviewed in order to reread the written production of Sándor Ferenczi. Winnicott's clinical and theoretical concepts allow returning to Ferenczi and rescuing aspects of his work that had been silenced in the psychoanalytic community. Ferenczi, in turn, is one that holds his presence in Winnicott's thought. Even though there are few times in which he cites Ferenczi in his work, it is possible to draw clear relationships between both theories. Three main issues are addressed: the role of the environment as active; the primitive traumatic event in which there is no one that has experience of it, and psychoanalysis as the place to experience that which happened in the first months of life for the first time; and, finally, severe pathologies and psychoses: technical innovations in Winnicott and Ferenczi for the treatment of psychotic and borderline patients. It is concluded that the theoretical and technical developments of Winnicott serve to illuminate a retrospective reading of Ferenczi. Copyright © 2016 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Nuclear theory research. Technical progress report

International Nuclear Information System (INIS)

1982-01-01

Progress is briefly described on the following studies: (1) Dirac phenomenology for deuteron elastic scattering, (2) Dirac wave functions in nuclear distorted wave calculations, (3) impulse approximation for p→p → dπ + reaction above the 3-3 resonance, (4) coherent π production, (5) nuclear potentials from Dirac bound state wavefunctions, (6) nonlocality effects in nuclear reactions, (7) unhappiness factors in DWBA description of (t,p) and (p,t) reactions, (8) absolute normalization of three-nucleon transfer reactions, (9) formulation of a finite-range CCBA computer program, (10) crossing symmetric solutions of the low equations, (11) pion scattering from quark bags, (12) study of the p 11 channel in the delta model, (13) isovector corrections in pion-nucleus scattering, (14) pionic excitation of nuclear giant resonances, and (15) isospin dependence of the second-order pion-nucleus optical potential

Basalt Waste Isolation Project Technical Program Evaluation Process: a criteria-based method

International Nuclear Information System (INIS)

Babad, H.; Evans, G.C.; Wolfe, B.A.

1982-01-01

The need to objectively evaluate the progress being made by the Basalt Waste Isolation Project (BWIP) toward establishing the feasibility of siting a nuclear waste repository in basalt (NWRB) mandates a process for evaluating the technical work of the project. To assist BWIP management in the evaluation process, the Systems Department staff has developed a BWIP Technical Program Evaluation Process (TPEP). The basic process relates progress on project technical work to the SWIP Functional and System Performance Criteria as defined in National Waste Terminal Storage (MWTS) Criteria Documents. The benefits of the TPEP to BWIP and future plans for TPEP are discussed. During fiscal year (FY) 1982, TPEP wll be further formalized and further applied to the review of BWIP technical activities

Technical Progress Report on Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

Energy Technology Data Exchange (ETDEWEB)

Bill Stanley; Patrick Gonzalez; Sandra Brown; Jenny Henman; Ben Poulter; Sarah Woodhouse Murdock; Neil Sampson; Tim Pearson; Sarah Walker; Zoe Kant; Miguel Calmon; Gilberto Tiepolo

2006-06-30

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st and July 30th 2006. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool. Work is being carried out in Brazil, Belize, Chile, Peru and the USA.

Expert communication link management: overview and progress

Science.gov (United States)

Dunkelberger, Kirk A.

1998-08-01

Consider the downsizing of our forces, the increasing complexity of our tactical platforms, and the ever widening array of communication options and the conclusion is inevitable. The need for automated support to reduce communication-related workload is critical to continued task force effectiveness. In a previous era, communication management expertise resided solely in the form of human experts. These experts flew with the pilots, providing the most effective means of communication in real time; they have since been removed from a great number of platforms due to force downsizing and real estate value in the cockpit. This burden has typically been shifted to the pilot, providing another set of tasks in an environment which is already far too taxing. An Expert Communication Link Manger (ECLM) is required -- a trusted, reliable assistant which can determine optimal link, channel, and waveform data for the communication requirements at hand and translate those requirements transparently into communication device control. Technologies are at hand which make ECLM possible; the mixture of these elements in the correct proportions can provide a capable, deployable, and cost effective ECLM in the near term. This paper describes specific applied ECLM research work in progress funded by the USAF under a four year effort. Operational objectives, technical objectives, a reference design, and technical excursions within the broad ECLM scope will be discussed in detail. Results of prototypes built to date in the area of communication inference from speech understanding, dynamic adaptive routing, and packet switching networks in the tactical environment will be presented.

Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Part 3. Safety assessment for geological disposal systems

International Nuclear Information System (INIS)

1999-11-01

Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the geological disposal concept for high-level radioactive wastes (HLW) in Japan. The present document, the part 3 of the progress report, concerns safety assessment for geological disposal systems definitely introduced in part 1 and 2 of this series and consists of 9 chapters. Chapter I concerns the methodology for safety assessment while Chapter II deals with diversity and uncertainty about the scenario, the adequate model and the required data of the systems above. Chapter III summarizes the components of the geological disposal system. Chapter IV refers to the relationship between radioactive wastes and human life through groundwater, i.e. nuclide migration. In Chapter V is made a reference case which characterizes the geological environmental data using artificial barrier specifications. (Ohno. S.)

Non-technical skills evaluation in the critical care air ambulance environment: introduction of an adapted rating instrument--an observational study.

Science.gov (United States)

Myers, Julia A; Powell, David M C; Psirides, Alex; Hathaway, Karyn; Aldington, Sarah; Haney, Michael F

2016-03-08

In the isolated and dynamic health-care setting of critical care air ambulance transport, the quality of clinical care is strongly influenced by non-technical skills such as anticipating, recognising and understanding, decision making, and teamwork. However there are no published reports identifying or applying a non-technical skills framework specific to an intensive care air ambulance setting. The objective of this study was to adapt and evaluate a non-technical skills rating framework for the air ambulance clinical environment. In the first phase of the project the anaesthetists' non-technical skills (ANTS) framework was adapted to the air ambulance setting, using data collected directly from clinician groups, published literature, and field observation. In the second phase experienced and inexperienced inter-hospital transport clinicians completed a simulated critical care air transport scenario, and their non-technical skills performance was independently rated by two blinded assessors. Observed and self-rated general clinical performance ratings were also collected. Rank-based statistical tests were used to examine differences in the performance of experienced and inexperienced clinicians, and relationships between different assessment approaches and assessors. The framework developed during phase one was referred to as an aeromedical non-technical skills framework, or AeroNOTS. During phase two 16 physicians from speciality training programmes in intensive care, emergency medicine and anaesthesia took part in the clinical simulation study. Clinicians with inter-hospital transport experience performed more highly than those without experience, according to both AeroNOTS non-technical skills ratings (p = 0.001) and general performance ratings (p = 0.003). Self-ratings did not distinguish experienced from inexperienced transport clinicians (p = 0.32) and were not strongly associated with either observed general performance (r(s) = 0.4, p = 0

Technical basis for the preparation of emergency plans relating to pressurized water reactors

International Nuclear Information System (INIS)

L'Homme, A.; Manesse, D.; Gauvain, J.; Crabol, B.

1989-01-01

The paper begins by summarizing the standard French approach to management of severe accidents at PWR plants. It goes on to define the source term used as a general basis for emergency plans for protection of the civil population. The paper describes the impact this source term has on both the site and the environment, which is subsequently used as a technical basis for determining the response of the utility and the public authorities concerned. The discussion concludes with a brief outline of the current status of various emergency plans and a description of additional work currently in progress and aimed at improving these plans [fr

New Desktop Virtual Reality Technology in Technical Education

Science.gov (United States)

Ausburn, Lynna J.; Ausburn, Floyd B.

2008-01-01

Virtual reality (VR) that immerses users in a 3D environment through use of headwear, body suits, and data gloves has demonstrated effectiveness in technical and professional education. Immersive VR is highly engaging and appealing to technically skilled young Net Generation learners. However, technical difficulty and very high costs have kept…

Fusion Materials Semiannual Progress Report for the Period Ending June 30, 1999

Energy Technology Data Exchange (ETDEWEB)

Rowcliffe, A.F.

1999-09-01

This is the twenty-sixth in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components. This effort forms one element of the materials program being conducted in support of the Fusion Energy Sciences Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and its reported separately.

US decommissioning strategy in today's regulatory, technical, political, and economic environments

International Nuclear Information System (INIS)

Colvin, J.F.

1995-01-01

The United States commercial nuclear power industry is nearly forty years old. Soon after the turn of the century, the United States expects to see a significant rise in the number of plants requiring decommissioning. This, coupled with recent economic pressures which are impacting the U.S. electrical generation industry and have resulted in the premature shutdown of some nuclear power plants, heighten the need for clear regulations and standards addressing facility closure and decommissioning. Since the issue of decommissioning involves public health and safety, technical, environmental and financial aspects, this complex regulatory environment poses a major challenge to the industry in this area. There are three fundamental issues facing utilities as they develop strategies for the eventual decommissioning of their nuclear power plants. These issues are the regulatory approach to decommissioning, the question of the availability of adequate funding, including the uncertainty resulting from the uncertainty of waste disposal options, and the need to meet environmental standards for the protection of health and safety. Futhermore, these issues, in particular the economic-related issues, are magnified in the event of prematurely shut down nuclear power plant. (Author)

Defining a Progress Metric for CERT RMM Improvement

Science.gov (United States)

2017-09-14

REV-03.18.2016.0 Defining a Progress Metric for CERT-RMM Improvement Gregory Crabb Nader Mehravari David Tobar September 2017 TECHNICAL ...fendable resource allocation decisions. Technical metrics measure aspects of controls implemented through technology (systems, soft- ware, hardware...implementation metric would be the percentage of users who have received anti-phishing training . • Effectiveness/efficiency metrics measure whether

Introducing errors in progress ratios determined from experience curves

NARCIS (Netherlands)

van Sark, W.G.J.H.M.

2008-01-01

Progress ratios (PRs) derived from historical data in experience curves are used for forecasting development of many technologies as a means to model endogenous technical change in for instance climate–economy models. These forecasts are highly sensitive to uncertainties in the progress ratio. As a

ANL Technical Support Program for DOE Environmental Restoration and Waste Management

International Nuclear Information System (INIS)

Bates, J.K.; Bradley, C.R.; Buck, E.C.; Cunnane, J.C.; Dietz, N.L.; Ebert, W.L.; Emery, J.W.; Feng, X.; Gerding, T.J.; Gong, M.; Hoh, J.C.; Mazer, J.J.; Wronkiewicz, D.J.; Bourcier, W.L.; Morgan, L.E.; Nielsen, J.K.; Steward, S.A.; Ewing, R.C.; Wang, L.M.; Han, W.T.; Tomozawa, M.

1992-03-01

This report provides an overview of progress during FY 1991 for the Technical Support Program that is part of the ANL Technology Support Activity for DOE, Environmental Restoration and Waste Management (EM). The purpose is to evaluate, before hot start-up of the Defenses Waste Processing Facility (DWPF) and the West Valley Demonstration Project (WVDP), factors that are likely to affect glass reaction in an unsaturated environment typical of what may be expected for the candidate Yucca Mountain repository site. Specific goals for the testing program include the following: (1) to review and evaluate available information on parameters that will be important in establishing the long-term performance of glass in a repository environment; (2) to perform testing to further quantify the effects of important variables where there are deficiencies in the available data; and (3) to initiate long-term testing that will bound glass performance under a range of conditions applicable to repository disposal

Relationship between intraoperative non-technical performance and technical events in bariatric surgery.

Science.gov (United States)

Fecso, A B; Kuzulugil, S S; Babaoglu, C; Bener, A B; Grantcharov, T P

2018-03-30

The operating theatre is a unique environment with complex team interactions, where technical and non-technical performance affect patient outcomes. The correlation between technical and non-technical performance, however, remains underinvestigated. The purpose of this study was to explore these interactions in the operating theatre. A prospective single-centre observational study was conducted at a tertiary academic medical centre. One surgeon and three fellows participated as main operators. All patients who underwent a laparoscopic Roux-en-Y gastric bypass and had the procedures captured using the Operating Room Black Box ® platform were included. Technical assessment was performed using the Objective Structured Assessment of Technical Skills and Generic Error Rating Tool instruments. For non-technical assessment, the Non-Technical Skills for Surgeons (NOTSS) and Scrub Practitioners' List of Intraoperative Non-Technical Skills (SPLINTS) tools were used. Spearman rank-order correlation and N-gram statistics were conducted. Fifty-six patients were included in the study and 90 procedural steps (gastrojejunostomy and jejunojejunostomy) were analysed. There was a moderate to strong correlation between technical adverse events (r s  = 0·417-0·687), rectifications (r s  = 0·380-0·768) and non-technical performance of the surgical and nursing teams (NOTSS and SPLINTS). N-gram statistics showed that after technical errors, events and prior rectifications, the staff surgeon and the scrub nurse exhibited the most positive non-technical behaviours, irrespective of operator (staff surgeon or fellow). This study demonstrated that technical and non-technical performances are related, on both an individual and a team level. Valuable data can be obtained around intraoperative errors, events and rectifications. © 2018 BJS Society Ltd Published by John Wiley & Sons Ltd.

The Basalt Waste Isolation Project technical program evaluation process: A criteria-based method

International Nuclear Information System (INIS)

Babad, H.; Evans, C.; Wolfe, B.A.

1982-01-01

The need to objectively evaluate the progress being made by the Basalt Waste Isolation Project (BWIP) toward establishing the feasibility of siting a nuclear waste repository in basalt (NWRB) mandates a process for evaluating the technical work of the project. To assist BWIP management in the evaluation process, the Systems Department staff has developed a BWIP Technical Program Evaluation Process (TPEP). The basic process relates progress on project technical work to the BWIP Functional and System Performance Criteria as defined in National Waste Terminal Storage (NWTS) Criteria Documents. The benefits of the TPEP to BWIP and future plans for TPEP are discussed. During fiscal year (FY) 1982, TPEP will be further formalized and further applied to the review of BWIP technical activities

Feed-in tariffs versus quotas: how to promote renewable s and stimulate technical progress for cost decrease?

International Nuclear Information System (INIS)

Menanteau, Ph.; Finon, D.; Lamy, M.L.

2002-01-01

Incentive schemes for the development of renewable energy sources may focus on quantities (defining national targets and setting up bidding systems, or quota systems providing for green certificate trading), or they may focus on prices (feed-in tariffs). Whatever the system chosen, the role of the public authorities is quite specific: to stimulate technical progress and speed up the technological learning processes so that ultimately renewable energy technologies will be able to compete with conventional technologies, once the environmental costs have been internalized. A comparison of instruments must thus take into account the characteristics of the innovation process and adoption conditions (uncertainties regarding cost curves, learning effects) which means also looking at dynamic efficiency criteria. The paper concludes that a system of feed-in tariffs is more efficient than a bidding system, but highlights the theoretical interest of green certificate trading which must be confirmed through practice, given the influence of market structures and rules on the performance of this type of approach. (author)

Progress report for 1978-79, Technical Physics Division

International Nuclear Information System (INIS)

Gopalaraman, C.P.; Deshpande, R.Y.

1980-01-01

The research and development activities of the Technical Physics Division (TPD) of the Bhabha Atomic Research Centre, Bombay, during the calendar years 1978 and 1979 are reported. The TPD's major areas of work are electronics instrumentation, crystal technology, mass spectrometers, cryogenic equipment and vacuum equipment. Some of the major achievements are: (1) fabrication of various electronic instruments and components for the pulsed nuclear magnetic resonance spectrometers, (2) growth of large size NaI(Tl) and Ge crystals, (3) growth of CsI, KDP and arsenic selenide crystals, (4) fabrication of quadrupole mass filters and (5) fabrication of mass spectrometers for gas analysis and D/H analysis in water samples. (M.G.B.)

Sources of technical assistance

International Nuclear Information System (INIS)

Laue, H.J.

1977-01-01

This paper shows examples of technical assistance programmes within bilateral cooperation agreements between the Federal Republic of Germany and a number of developing countries of very different characteristics and summarizes the possibilities of technical assistance granted by international organizations, such as IAEA, UNDP, etc. A basic requirement for a successful transfer of technology is a high knowledge level of the indigenous scientists and engineers. Therefore, programmes for training and education and for information exchange are presented. Based on these, the means and methods of planning, performance and quality assurance are explained by practical examples and are related to the progress achieved in the use of nuclear energy and in establishing a national industry in the developing countries. (orig.) [de

Geothermal progress monitor. Progress report No. 3, March-April 1980

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

Progress is reviewed in the following areas: electric uses; direct heat uses; drilling activities; exploration; leases; outreach and technical assistance; feasibility studies and application demonstrations; geothermal loan guarantee program; general activities; R and D activities; legal, institutional, and regulatory activities; environmental activities; and state, local, and private sector activities. Also included are a list of reports and publications and a directory of individuals in the geothermal community. (MHR)

Research progress on distribution, migration, transformation of antibiotics and antibiotic resistance genes (ARGs) in aquatic environment.

Science.gov (United States)

Shao, Sicheng; Hu, Yongyou; Cheng, Jianhua; Chen, Yuancai

2018-05-28

Antimicrobial and antibiotics resistance caused by misuse or overuse of antibiotics exposure is a growing and significant threat to global public health. The spread and horizontal transfer of antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) by the selective pressure of antibiotics in an aquatic environment is a major public health issue. To develop a better understanding of potential ecological risks die to antibiotics and ARGs, this study mainly summarizes research progress about: (i) the occurrence, concentration, fate, and potential ecological effects of antibiotics and ARGs in various aquatic environments, (ii) the threat, spread, and horizontal gene transfer (HGT) of ARGs, and (iii) the relationship between antibiotics, ARGs, and ARB. Finally, this review also proposes future research direction on antibiotics and ARGs.

Environment assisted degradation mechanisms in aluminum-lithium alloys

Science.gov (United States)

Gangloff, Richard P.; Stoner, Glenn E.; Swanson, Robert E.

1988-01-01

Section 1 of this report records the progress achieved on NASA-LaRC Grant NAG-1-745 (Environment Assisted Degradation Mechanisms in Al-Li Alloys), and is based on research conducted during the period April 1 to November 30, 1987. A discussion of work proposed for the project's second year is included. Section 2 provides an overview of the need for research on the mechanisms of environmental-mechanical degradation of advanced aerospace alloys based on aluminum and lithium. This research is to provide NASA with the basis necessary to permit metallurgical optimization of alloy performance and engineering design with respect to damage tolerance, long term durability and reliability. Section 3 reports on damage localization mechanisms in aqueous chloride corrosion fatigue of aluminum-lithium alloys. Section 4 reports on progress made on measurements and mechanisms of localized aqueous corrosion in aluminum-lithium alloys. Section 5 provides a detailed technical proposal for research on environmental degradation of Al-Li alloys, and the effect of hydrogen in this.

Environmental Sciences Division annual progress report for period ending September 30, 1991

Energy Technology Data Exchange (ETDEWEB)

1992-04-01

This progress report summarizes the research and development activities conducted in the Environmental Sciences Division of Oak Ridge National Laboratory during the period October 1, 1990, through September 30, 1991. The report is structured to provide descriptions of current activities and accomplishments in each of the division's major organizational units. Following the sections describing the organizational units is a section devoted to lists of information necessary to convey the scope of the work in the division. The Environmental Sciences Division (ESD) at Oak Ridge National Laboratory (ORNL) conducts environmental research and analyses associated with both energy technology development and the interactions between people and the environment. The division engages in basic and applied research for a diverse list of sponsors. While the US Department of Energy (DOE) is the primary sponsor ESD staff also perform research for other federal agencies, state agencies, and private industry. The division works collaboratively with federal agencies, universities, and private organizations in achieving its research objectives and hosts a large number of visiting investigators from these organizations. Given the diverse interdisciplinary specialization of its staff, ESD provides technical expertise on complex environmental problems and renders technical leadership for major environmental issues of national and local concern. This progress report highlights many of ESD's accomplishment in these and other areas in FY 1991.

Environmental Sciences Division annual progress report for period ending September 30, 1991

Energy Technology Data Exchange (ETDEWEB)

1992-04-01

This progress report summarizes the research and development activities conducted in the Environmental Sciences Division of Oak Ridge National Laboratory during the period October 1, 1990, through September 30, 1991. The report is structured to provide descriptions of current activities and accomplishments in each of the division`s major organizational units. Following the sections describing the organizational units is a section devoted to lists of information necessary to convey the scope of the work in the division. The Environmental Sciences Division (ESD) at Oak Ridge National Laboratory (ORNL) conducts environmental research and analyses associated with both energy technology development and the interactions between people and the environment. The division engages in basic and applied research for a diverse list of sponsors. While the US Department of Energy (DOE) is the primary sponsor ESD staff also perform research for other federal agencies, state agencies, and private industry. The division works collaboratively with federal agencies, universities, and private organizations in achieving its research objectives and hosts a large number of visiting investigators from these organizations. Given the diverse interdisciplinary specialization of its staff, ESD provides technical expertise on complex environmental problems and renders technical leadership for major environmental issues of national and local concern. This progress report highlights many of ESD`s accomplishment in these and other areas in FY 1991.

Savannah River Ecology Laboratory. Annual technical progress report of ecological research

International Nuclear Information System (INIS)

Smith, M.H.

1996-01-01

The Savannah River Ecology Laboratory (SREL) is a research unit of the University of Georgia (UGA). The overall mission of the Laboratory is to acquire and communicate knowledge of ecological processes and principles. SREL conducts basic and applied ecological research, as well as education and outreach programs, under a contract with the U.S. Department of Energy (DOE) at the Savannah River Site (SRS) near Aiken, South Carolina. Significant accomplishments were made during the past year in the areas of research, education and service. The Laboratory's research mission was fulfilled with the publication of two books and 143 journal articles and book chapters by faculty, technical and students, and visiting scientists. An additional three books and about 80 journal articles currently are in press. Faculty, technician and students presented 193 lectures, scientific presentations, and posters to colleges and universities, including minority institutions. Dr. J Vaun McArthur organized and conducted the Third Annual SREL Symposium on the Environment: New Concepts in Strewn Ecology: An Integrative Approach. Dr. Michael Newman conducted a 5-day course titled Quantitative Methods in Ecotoxicology, and Dr. Brian Teppen of The Advanced Analytical Center for Environmental Sciences (AACES) taught a 3-day short course titled Introduction to Molecular Modeling of Environmental Systems. Dr. I. Lehr Brisbin co-hosted a meeting of the Crocodile Special Interest Group. Dr. Rebecca Sharitz attended four symposia in Japan during May and June 1996 and conducted meetings of the Executive Committee and Board of the International Association for Ecology (ENTECOL)

Savannah River Ecology Laboratory. Annual technical progress report of ecological research

Energy Technology Data Exchange (ETDEWEB)

Smith, M.H.

1996-07-31

The Savannah River Ecology Laboratory (SREL) is a research unit of the University of Georgia (UGA). The overall mission of the Laboratory is to acquire and communicate knowledge of ecological processes and principles. SREL conducts basic and applied ecological research, as well as education and outreach programs, under a contract with the U.S. Department of Energy (DOE) at the Savannah River Site (SRS) near Aiken, South Carolina. Significant accomplishments were made during the past year in the areas of research, education and service. The Laboratory`s research mission was fulfilled with the publication of two books and 143 journal articles and book chapters by faculty, technical and students, and visiting scientists. An additional three books and about 80 journal articles currently are in press. Faculty, technician and students presented 193 lectures, scientific presentations, and posters to colleges and universities, including minority institutions. Dr. J Vaun McArthur organized and conducted the Third Annual SREL Symposium on the Environment: New Concepts in Strewn Ecology: An Integrative Approach. Dr. Michael Newman conducted a 5-day course titled Quantitative Methods in Ecotoxicology, and Dr. Brian Teppen of The Advanced Analytical Center for Environmental Sciences (AACES) taught a 3-day short course titled Introduction to Molecular Modeling of Environmental Systems. Dr. I. Lehr Brisbin co-hosted a meeting of the Crocodile Special Interest Group. Dr. Rebecca Sharitz attended four symposia in Japan during May and June 1996 and conducted meetings of the Executive Committee and Board of the International Association for Ecology (ENTECOL).

River Protection Project waste feed delivery program technical performance measurement assessment plan

International Nuclear Information System (INIS)

O'TOOLE, S.M.

1999-01-01

This plan establishes a formal technical performance-monitoring program. Technical performance is assessed by establishing requirements based performance goals at the beginning of a program and routinely evaluating progress in meeting these goals at predetermined milestones throughout the project life cycle

Integral Fast Reactor Program annual progress report, FY 1994

International Nuclear Information System (INIS)

Chang, Y.I.; Walters, L.C.; Laidler, J.J.; Pedersen, D.R.; Wade, D.C.; Lineberry, J.J.

1994-12-01

This report summarizes highlights of the technical progress made in the Integral Fast Reactor (IFR) Program in FY 1994. Technical accomplishments are presented in the following areas of the IFR technology development activities: metal fuel performance; pyroprocess development; safety experiments and analyses; core design development; fuel cycle demonstration; and LMR technology R ampersand D

Salmonella enterica suppresses Pectobacterium carotovorum subsp. carotovorum population and soft rot progression by acidifying the microaerophilic environment.

Science.gov (United States)

Kwan, Grace; Charkowski, Amy O; Barak, Jeri D

2013-02-12

Although enteric human pathogens are usually studied in the context of their animal hosts, a significant portion of their life cycle occurs on plants. Plant disease alters the phyllosphere, leading to enhanced growth of human pathogens; however, the impact of human pathogens on phytopathogen biology and plant health is largely unknown. To characterize the interaction between human pathogens and phytobacterial pathogens in the phyllosphere, we examined the interactions between Pectobacterium carotovorum subsp. carotovorum and Salmonella enterica or Escherichia coli O157:H7 with regard to bacterial populations, soft rot progression, and changes in local pH. The presence of P. carotovorum subsp. carotovorum enhanced the growth of both S. enterica and E. coli O157:H7 on leaves. However, in a microaerophilic environment, S. enterica reduced P. carotovorum subsp. carotovorum populations and soft rot progression by moderating local environmental pH. Reduced soft rot was not due to S. enterica proteolytic activity. Limitations on P. carotovorum subsp. carotovorum growth, disease progression, and pH elevation were not observed on leaves coinoculated with E. coli O157:H7 or when leaves were coinoculated with S. enterica in an aerobic environment. S. enterica also severely undermined the relationship between the phytobacterial population and disease progression of a P. carotovorum subsp. carotovorum budB mutant defective in the 2,3-butanediol pathway for acid neutralization. Our results show that S. enterica and E. coli O157:H7 interact differently with the enteric phytobacterial pathogen P. carotovorum subsp. carotovorum. S. enterica inhibition of soft rot progression may conceal a rapidly growing human pathogen population. Whereas soft rotted produce can alert consumers to the possibility of food-borne pathogens, healthy-looking produce may entice consumption of contaminated vegetables. Salmonella enterica and Escherichia coli O157:H7 may use plants to move between animal

Environmental Aspects of the Engineering Training at Technical University

Directory of Open Access Journals (Sweden)

V. V. Bushueva

2015-01-01

Full Text Available Problem relevance. The article gives a justification for a need to train professionally competent, ecologically oriented engineers capable to create new equipment taking into account the ecological characteristics. Such approach expresses a requirement coherence to develop technical systems and technologies taking into account, both technical reliability and human and environmental safety. Today, in conditions of modern industrial production it is an important point in engineer’s activity. So to train future engineers who meet these requirements new forms and methods are to be found.Objectives. To prove that involvement of creative student’s teams in training the future ecologically oriented engineers is of importance. The organisational structure and methods of activities along with the principles of revitalizing search for engineering ideas and solutions to develop environmentally safe technical systems and technologies allow us to solve more complicated problems. This is the important characteristic in activities of creative groups. The article considers a significance of the future engineer’s responsibility in terms of environment safety. It gives "Methodical advices to analyse the operational impacts of technical systems on the human and environment" to show that there is a need in development of reliable and environment-safe technical systems.Novelty of this work is a technique for the organization and forms of student creative team’s activities. It represents a revised and updated option of a technique of the creative teams working at the industrial enterprises in France. The revised technique takes into consideration both the specifics of student's audience at technical university and the environment-oriented tasks to be solved. Efficiency of search and solution of environment-oriented engineering tasks is enhanced owing to use of revitalizing methods for the creative team’s activities, which are widely used today in student

Geothermal direct-heat utilization assistance. Quarterly project progress report, April--June 1993

Energy Technology Data Exchange (ETDEWEB)

Lienau, P.

1993-06-01

Technical assistance was provided to 60 requests from 19 states. R&D progress is reported on: evaluation of lineshaft turbine pump problems, geothermal district heating marketing strategy, and greenhouse peaking analysis. Two presentations and one tour were conducted, and three technical papers were prepared. The Geothermal Progress Monitor reported: USGS Forum on Mineral Resources, Renewable Energy Tax Credits Not Working as Congress Intended, Geothermal Industry Tells House Panel, Newberry Pilot Project, and Low-Temperature Geothermal Resources in Nevada.

Geothermal direct-heat utilization assistance. Quarterly progress report, April--June 1993

Energy Technology Data Exchange (ETDEWEB)

1993-08-01

Progress is reported on the following R&D activities: evaluation of lineshaft turbine pump problems, geothermal district heating marketing strategy, and greenhouse peaking analysis. Other activities are reported on technical assistance, technology transfer, and the geothermal progress monitor.

Integral Fast Reactor Program. Annual progress report, FY 1992

Energy Technology Data Exchange (ETDEWEB)

Chang, Y.I.; Walters, L.C.; Laidler, J.J.; Pedersen, D.R.; Wade, D.C.; Lineberry, M.J.

1993-06-01

This report summarizes highlights of the technical progress made in the Integral Fast Reactor (IFR) Program in FY 1992. Technical accomplishments are presented in the following areas of the IFR technology development activities: (1) metal fuel performance, (2) pyroprocess development, (3) safety experiments and analyses, (4) core design development, (5) fuel cycle demonstration, and (6) LMR technology R&D.

Development of a technical scheme for the management of chemical dangerous substances in hospitable environments

International Nuclear Information System (INIS)

Calleja Amador, C.E.

2002-01-01

The chemical substances that are used in the hospitals, and their remainders, represent risks for the environment, the health and security of those who work in these establishments, and of the civil population. The deficiency of a norm that establishes the directives for the handling responsible for such products in the hospitals that our country has motivated the elaboration of a technical scheme that serves as it guides for the correct manipulation, storage and safe disposition of chemical substances in the twenty-nine hospitals of the Caja Costarricense del Seguro Social, establishing Procedures of Standard Operation for its management. To development of the guideline proposal it took a sample of hospitals that includes three levels of comple complexity: national, regional and peripheral. Applying a methodology of evaluation of risks two factors of risk of hospitable were determined, the zones and the population but affected by the existence of chemical substances, which allowed to identify some operative deficiencies in the product handling diverse. The qualitative analysis of the results lead to the elaboration of a technical scheme that includes an instrument for the identification of risks, guideline for the management responsible for hospitable chemical substances, a friendly tool computations like complementary source of intelligence and the proposal of a governing group in charge of the monitoring of the fulfillment of these lineament. (Author) [es

Gatlinburg conference: barometer of progress in analytical chemistry

International Nuclear Information System (INIS)

Shults, W.D.

1981-01-01

Much progress has been made in the field of analytical chemistry over the past twenty-five years. The AEC-ERDA-DOE family of laboratories contributed greatly to this progress. It is not surprising then to find a close correlation between program content of past Gatlinburg conferences and developments in analytical methodology. These conferences have proved to be a barometer of technical status

Pacific Northwest Laboratory annual report for 1990 to the Assistant Secretary for Environment, Safety, and Health

International Nuclear Information System (INIS)

Faust, L.G.; Moraski, R.V.; Selby, J.M.

1991-05-01

Part 5 of the 1990 Annual Report to the US Department of Energy's Assistant Secretary for Environment, Safety, and Health presents Pacific Northwest Laboratory's progress on work performed for the Office of Environmental Guidance, the Office of Environmental Compliance, the Office of Environmental Audit, the Office of National Environmental Policy Act Project Assistance, the Office of Nuclear Safety, the Office of Safety Compliance, and the Office of Policy and Standards. For each project, as identified by the Field Work Proposal, there is an article describing progress made during fiscal year 1990. Authors of these articles represent a broad spectrum of capabilities derived from five of the seven technical centers of the Laboratory, reflecting the interdisciplinary nature of the work

Technical basis for the initiation and cessation of environmentally-assisted cracking of low-alloy steels in elevated temperature PWR environments

International Nuclear Information System (INIS)

James, L.A.

1997-01-01

The Section 11 Working Group on Flaw Evaluation of the ASME B and PV Code Committee is considering a Code Case to allow the determination of the conditions under which environmentally-assisted cracking of low-alloy steels could occur in PWR primary environments. This paper provides the technical support basis for such an EAC Initiation and Cessation Criterion by reviewing the theoretical and experimental information in support of the proposed Code Case

Technical basis for the initiation and cessation of environmentally-assisted cracking of low-alloy steels in elevated temperature PWR environments

Energy Technology Data Exchange (ETDEWEB)

James, L.A.

1997-10-01

The Section 11 Working Group on Flaw Evaluation of the ASME B and PV Code Committee is considering a Code Case to allow the determination of the conditions under which environmentally-assisted cracking of low-alloy steels could occur in PWR primary environments. This paper provides the technical support basis for such an EAC Initiation and Cessation Criterion by reviewing the theoretical and experimental information in support of the proposed Code Case.

The environment and directed technical change: comment

International Nuclear Information System (INIS)

Hourcade, Jean-Charles; Pottier, Antonin; Espagne, Etienne

2011-11-01

This paper discusses the growth model with environmental constraints recently presented in (Acemoglu et al., 2011) which focuses on the redirection of technical change by climate policies with research subsidies and a carbon tax. First, Acemoglu et al.'s model and chosen parameters yield numerical results that do not support the conclusion that ambitious climate policies can be conducted 'without sacrificing (much or any) long-run growth'. Second, they select unrealistic key parameters for carbon sinks and elasticity of substitution. We find that more realistic parameters lead to very different results. Third, the model leads to an unrealistic conclusion when used to analyse endogenous growth, suggesting specification problems. (authors)

Technical progress report for the quarter 1 October-31 December 1980

International Nuclear Information System (INIS)

1981-01-01

This report describes the technical accomplishments on the commercial nuclear waste management programs and on the geologic disposal of nuclear wastes. The program is organized into eight tasks: systems, waste package, site, repository, regulatory and institutional, test facilities and excavations, land acquisition, and program management

Development of TRITN : In-house technical information network of Technical Research Institute in The Chugoku Electric Power Co., Inc.

Science.gov (United States)

Ebara, Hisao

With the increase in information amount, progress in information network, diversified technology and change in in-house organization the Technical Research Institute has necessitated to shift the conventional technical database processing by use of personal computers into new system promised for future use. It enables to; provide classification system which meets the needs of the institute; execute distributed processing using workstations; make the low cost processing using commercial softwares; make networks using LAN, WAN personal computer communication, and provide primary materials (text data) on facsimiles using optical disks. Such features are those of technical information database system "TRITN" which is available to any persons and at any time. This paper describes how TRITN was developed and the system outline.

Office of Waste Isolation progress report, October 1976

International Nuclear Information System (INIS)

1977-01-01

Progress of the National Waste Terminal Storage program is reported under: technical projects, facility projects, systems projects, and regulatory affairs. Various media (salt, shales, rocks) for geologic storage are covered

Final Technical Progress Report Long term risk from actinides in the environment: Modes of mobility

International Nuclear Information System (INIS)

Kirchner, Thomas B.

2002-01-01

The key source of uncertainty in assessing actinide mobility is the relative importance of transport by: (1) wind erosion, (2) water erosion, and (3) vertical migration. Each of these three processes depends on several environmental factors and they compete with one another. A scientific assessment of the long-term risks associated with actinides in surface soils depends on better quantifying each of these three modes of mobility. The objective from our EMSP study was to quantify the mobility of soil actinides by wind erosion, water erosion, and vertical migration at three semiarid sites where actinide mobility is a key technical, social and legal issue. This EMSP project was the first to evaluate all three factors at a site. The approach has been to investigate both short- and long-term issues based on field and lab studies and model comparisons. Our results demonstrate the importance of incorporating threshold responses into a modeling framework that accounts for environmental factors and natural disturbances that trigger large changes in actinide mobility. The study measured erosional losses of sediment and fallout cesium (an actinide analogue) from field plots located near WIPP in 1998. The results highlight the large effect of burning as a disturbance on contaminant transport and mobility via runoff and erosion. The results show that runoff, erosion, and actinide transport are (1) strongly site specific-differences in radionuclide transport between WIPP and Rocky Flats differed by a factor of twelve because of soil and vegetation differences, and (2) are strongly impacted by disturbances such as fire, which can increase runoff, erosion, and actinide transport by more than an order of magnitude. In addition, a laboratory experiment using soil columns was conducted to investigate the vertical transport of contaminants in sandy soils. Nine columns of soil collected from the vicinity of the WIPP site were prepared. The column consisted of a piece of PVC pipe 20 cm

Final Technical Progress Report Long term risk from actinides in the environment: Modes of mobility

Energy Technology Data Exchange (ETDEWEB)

Thomas B. Kirchner

2002-03-22

The key source of uncertainty in assessing actinide mobility is the relative importance of transport by: (1) wind erosion, (2) water erosion, and (3) vertical migration. Each of these three processes depends on several environmental factors and they compete with one another. A scientific assessment of the long-term risks associated with actinides in surface soils depends on better quantifying each of these three modes of mobility. The objective from our EMSP study was to quantify the mobility of soil actinides by wind erosion, water erosion, and vertical migration at three semiarid sites where actinide mobility is a key technical, social and legal issue. This EMSP project was the first to evaluate all three factors at a site. The approach has been to investigate both short- and long-term issues based on field and lab studies and model comparisons. Our results demonstrate the importance of incorporating threshold responses into a modeling framework that accounts for environmental factors and natural disturbances that trigger large changes in actinide mobility. The study measured erosional losses of sediment and fallout cesium (an actinide analogue) from field plots located near WIPP in 1998. The results highlight the large effect of burning as a disturbance on contaminant transport and mobility via runoff and erosion. The results show that runoff, erosion, and actinide transport are (1) strongly site specific-differences in radionuclide transport between WIPP and Rocky Flats differed by a factor of twelve because of soil and vegetation differences, and (2) are strongly impacted by disturbances such as fire, which can increase runoff, erosion, and actinide transport by more than an order of magnitude. In addition, a laboratory experiment using soil columns was conducted to investigate the vertical transport of contaminants in sandy soils. Nine columns of soil collected from the vicinity of the WIPP site were prepared. The column consisted of a piece of PVC pipe 20 cm

Annual progress report 1980

International Nuclear Information System (INIS)

1981-01-01

The technical support activities of the IPSN to competent administrations in 1980 has been marked: namely by the authorizations of divergence for 9 units EdF-PWR of 900 MW, the authorization project of creation and extension of reprocessing plant of COGEMA at the Hague UP 2 -800 and the authorization of starting up of the third unit of production of the EURODIF enrichment plant at Tricastin. On the other hand, IPSN has participated at the elaboration of a certain number of legislative and regulation texts relative to the control of nuclear matter, to radioprotection standards and to criteria of safety. For the safety of breeder, the test made at CABRI pile, in the international research program has given confirmation of the validity of theoretical models used in accidents calculations, hypothetical accidents which has allowed to reactualize safety criteria which have to be used for the development of this type of reactor. In worker radioprotection the results obtained in laboratory on the effect of radon, the progress made in personal dosimetry and the action of radioprotection undertaken in uranium mines constitutes a coherent effort. The deep drilling in granit (1000 m) and the experimental associated program which has finished the indispensable scientific data for the future policy in matter of storage of radioactives wastes. IPSN has contributed to progress made in the rules of exploitation of reactors, in the definition of wastes containment -specially at the output of reprocessing plant- in handling machines in hazardeous areas and in the study of environment [fr

Annual technical progress report: reactor safety, Government fiscal year 1978

International Nuclear Information System (INIS)

1978-01-01

Progress in LMFBR safety studies on accident debris behavior is reported under the following subtask titles: high-temperature-concentration aerosols, large-scale molten fuel tests, sodium release tests, and risk analysis

Recent progress in sodium technology

Energy Technology Data Exchange (ETDEWEB)

Hallett, W. J.

1963-10-15

Progress over the past year in U. S. laboratories studying some of the materials and engineering problems that must be resolved in bringing the technology of sodium to an economically and technically attractive point is reviewed. The status of sodium cooled power reactors in the U. S. is described. (P.C.H.)

1984-85 ISN progress report

International Nuclear Information System (INIS)

1985-01-01

This progress report ISN 1984-1985 deals with the following subjects: nuclear physics theory, peripheral and intermediate energy physics, characteristics of reaction mechanisms in heavy ion collisions, nuclear structure, fundamental interactions, experimental methods and new instrumentation, some interdisciplinary research activities and technical activities, the SARA cyclotron and finally, technology transfer and valorisation [fr

Instrumentation of dynamic gas pulse loading system. Technical progress report, first quarter 1992

Energy Technology Data Exchange (ETDEWEB)

Mohaupt, H.

1992-04-14

The overall goal of this work is to further develop and field test a system of stimulating oil and gas wells, which increases the effective radius of the well bore so that more oil can flow into it, by recording pressure during the gas generation phase in real time so that fractures can be induced more predictably in the producing formation. Task 1: Complete the laboratory studies currently underway with the prototype model of the instrumentation currently being studied. Task 2: Perform field tests of the model in the Taft/Bakersfield area, utilizing operations closest to the engineers working on the project, and optimize the unit for various conditions encountered there. Task 3: Perform field test of the model in DGPL jobs which are scheduled in the mid-continent area, and optimize the unit for downhole conditions encountered there. Task 4: Analyze and summarize the results achieved during the complete test series, documenting the steps for usage of downhole instrumentation in the field, and compile data specifying use of the technology by others. Task 5: Prepare final report for DOE, and include also a report on the field tests completed. Describe and estimate the probability of the technology being commercialized and in what time span. The project has made substantial technical progress, though we are running about a month behind schedule. Expenditures are in line with the schedule. Increased widespread interest in the use of DGPL stimulation has kept us very busy. The computer modeling and test instrumentation developed under this program is already being applied to commercial operations.

The BGO collaboration progress report 1990

International Nuclear Information System (INIS)

Anon.

1990-01-01

A large solid angle BGO calorimeter is under contruction for photo-nuclear experiments at intermediate energy facilities. In this note the status progress of the project, the technical steps undertaken in the construction of the apparatus and the goals of this initiative are reviewed

Savannah River Plant, Works Technical Department monthly progress report for March 1956

International Nuclear Information System (INIS)

1956-01-01

This document details activities of the Works Technical Department during the month of March 1956. It covers reactor technology, separations technology, engineering assistance and heavy water technology

Technical progress report for the quarter 1 October-31 December 1980

Energy Technology Data Exchange (ETDEWEB)

1981-01-01

This report describes the technical accomplishments on the commercial nuclear waste management programs and on the geologic disposal of nuclear wastes. The program is organized into eight tasks: systems, waste package, site, repository, regulatory and institutional, test facilities and excavations, land acquisition, and program management. (DLC)

TECHNICAL COORDINATION

CERN Multimedia

Austin Ball

2013-01-01

  Since the last report, much visible progress has been made, as the LS1 programme approaches the halfway point. From early October, technical and safety shift-crew have been present around the clock, allowing detectors to stay switched on overnight, ensuring that safety systems are operational and instructions for non-expert shift-crew are clear. LS1 progress Throughout the summer, whilst the solenoid vacuum tank and YB0 surfaces were accessible, an extensive installation programme took place to prepare for Tracker colder operation and the PLT installation, in 2014, the Phase 1 Pixel Tracker installation, in 2016–’17, and the HCAL Phase 1 upgrade completion, ending in LS2. This included pipework for N2 or dry air to flush the Tracker bulkhead region, many sensors to monitor temperature and dew point in the Tracker and its service channels, heating wires outside the Tracker cooling bundles, supports for the new vacuum-jacketed, concentric, CO2 Pixel cooling lines, the PLT cool...

Progress and status of the Integral Fast Reactor (IFR) fuel cycle development

International Nuclear Information System (INIS)

Till, C.E.; Chang, Y.I.

1993-01-01

The Integral Fast Reactor (IFR) fuel cycle holds promise for substantial improvements in economics, diversion-resistance, and waste management. This paper discusses technical features of the IFR fuel cycle, its technical progress, the development status, and the future plans and directions

Progress and status of the Integral Fast Reactor (IFR) fuel cycle development

Energy Technology Data Exchange (ETDEWEB)

Till, C.E.; Chang, Y.I.

1993-03-01

The Integral Fast Reactor (IFR) fuel cycle holds promise for substantial improvements in economics, diversion-resistance, and waste management. This paper discusses technical features of the IFR fuel cycle, its technical progress, the development status, and the future plans and directions.

Progress and status of the Integral Fast Reactor (IFR) fuel cycle development

Energy Technology Data Exchange (ETDEWEB)

Till, C.E.; Chang, Y.I.

1993-01-01

The Integral Fast Reactor (IFR) fuel cycle holds promise for substantial improvements in economics, diversion-resistance, and waste management. This paper discusses technical features of the IFR fuel cycle, its technical progress, the development status, and the future plans and directions.

Integral Fast Reactor Program annual progress report, FY 1991

International Nuclear Information System (INIS)

1992-06-01

This report summarizes highlights of the technical progress made in the Integral Fast Reactor (IFR) Program in FY 1991. Technical accomplishments are presented in the following areas of the IFR technology development activities: (1) metal fuel performance, (2) pyroprocess development, (3) safety experiments and analyses, (4) core design development, (5) fuel cycle demonstration, and (6) LMR technology R ampersand D

Integral Fast Reactor Program. Annual progress report, FY 1993

Energy Technology Data Exchange (ETDEWEB)

Chang, Y.I.; Walters, L.C.; Laidler, J.J.; Pedersen, D.R.; Wade, D.C.; Lineberry, M.J.

1994-10-01

This report summarizes highlights of the technical progress made in the Integral Fast Reactor (IFR) Program in FY 1993. Technical accomplishments are presented in the following areas of the IFR technology development activities: (1) metal fuel performance, (2) pyroprocess development, (3) safety experiments and analyses, (4) core design development, (5) fuel cycle demonstration, and (6) LMR technology R and D.

Integral Fast Reactor Program. Annual progress report, FY 1993

International Nuclear Information System (INIS)

Chang, Y.I.; Walters, L.C.; Laidler, J.J.; Pedersen, D.R.; Wade, D.C.; Lineberry, M.J.

1994-10-01

This report summarizes highlights of the technical progress made in the Integral Fast Reactor (IFR) Program in FY 1993. Technical accomplishments are presented in the following areas of the IFR technology development activities: (1) metal fuel performance, (2) pyroprocess development, (3) safety experiments and analyses, (4) core design development, (5) fuel cycle demonstration, and (6) LMR technology R and D

Effective legal protection in the licensing of technical installations

International Nuclear Information System (INIS)

Froehler, L.

1987-01-01

Undeterminate concepts of law shall match the dynamism of technical progress in licensing technical installations (e.g. section 7, para. 2 no. 3 Atomic Energy Act). The administration and the courts have the duty to equalize normative deficits of regulation. Decrees and administrative provisions have an important impact. Administrative courts shall exercise legal protection more efficiently what e.g. can be possible after a shortening of stages of appeal. (CW) [de

Humic substances in performance assessment of nuclear waste disposal: Actinide and iodine migration in the far-field. First technical progress report

International Nuclear Information System (INIS)

Buckau, G.

2003-04-01

The present project is one in a series of research activities supported by the European Commission on the role of humic substances for the long-term safety of nuclear waste disposal. These activities started in the mid eighties within the MIRAGE project (MIgration of RAdionuclides in the GEosphere) with the most recent project being ''Effects of humic substances on the migration of radionuclides: Complexation and transport of actinides (HUMICS)'' (FI4W-CT96-0028). The HUMICS project was conducted within the fourths framework of the European Commissions research program. It started January 1997 and had a duration of three years. The results of the HUMICS project can be found in three open technical progress reports and a final report [1-4]. In analogy with the HUMICS project, the present project makes use of annual technical progress reports where individual results are published as papers in the form of annexes. By this approach, results rapidly become available to interested parties in a compact form before their publication in various scientific journals and conference proceedings. Furthermore, some of the more preliminary and/or detailed results are not likely to appear in scientific journals and proceedings. The present project is conducted within the fifths framework of the European Commissions research program. It started November 2001 and has a duration of three years. The present report covers the first project year, i.e. November 2001 to September 2002. The project is divided into eight different work packages. These are (i) ''Critical assessment of experimental methods'', (ii) ''Generation and characterization of humic substances'', (iii) ''Radionuclide humate interaction data by designed system investigations'', (iv) ''Characterization of radionuclide humate complexes'', (v) ''Natural chemical analogue studies'', (vi) ''Radionuclide transport experiments'', (vii) ''Model development'', and (viii) ''Performance assessment''. Division of work into

Progress and status of the Integral Fast Reactor (IFR) fuel cycle development

International Nuclear Information System (INIS)

Till, C.E.; Chang, Y.I.

1991-01-01

The Integral Fast Reactor (IFR) fuel cycle holds promise for substantial improvements in economics, diversion-resistance, and waste management. This paper discusses technical features of the IFR fuel cycle, its technical progress, the development status, and the future plans and directions. 10 refs

Progress and status of the Integral Fast Reactor (IFR) fuel cycle development

Energy Technology Data Exchange (ETDEWEB)

Till, C.E.; Chang, Y.I.

1991-01-01

The Integral Fast Reactor (IFR) fuel cycle holds promise for substantial improvements in economics, diversion-resistance, and waste management. This paper discusses technical features of the IFR fuel cycle, its technical progress, the development status, and the future plans and directions. 10 refs.

Progress and status of the Integral Fast Reactor (IFR) fuel cycle development

International Nuclear Information System (INIS)

Till, C.E.; Chang, Y.I.

1991-01-01

The Integral Fast Reactor (IFR) fuel cycle holds promise for substantial improvements in economics, diversion-resistance, and waste management. This paper discusses technical features of the IFR fuel cycle, its technical progress, the development status, and the future plans and directions. (author)

GT-MHR COMMERCIALIZATION STUDY TECHNICAL PROGRESS AND COST MANAGEMENT REPORT FOR THE PERIOD AUGUST 1 THROUGH AUGUST 31, 2003

International Nuclear Information System (INIS)

Shenoy, A.S.

2003-01-01

OAK A271 GT-MHR COMERCIALiZATION STUDY TECHNICAL PROGRESS AND COST MANAGEMENT REPORT FOR THE PERIOD AUGUST 1 THROUGH AUGUST 31, 2003. In the process of fabricating the MHR-1 irradiation test capsule, Petten has advised that three thermocouples (out of 24) and the Self Powered Neutron detector were damaged during high temperature brazing with the upper capsule lid. Procurement of new TCs and SPN is in process but there will be a delay in the irradiation test of about nine weeks. Startup of the irradiation is now projected to be July or August 2004. In preparation for performing the nuclear design analysis activities required by the advanced fuel studies task, a complete 3-D nuclear design analysis is first being performed of the GT-MHR reference design. This will serve as the baseline for studies of the advanced fuel nuclear design performance

Fundamental studies of separation processes. Technical progress report

International Nuclear Information System (INIS)

Rogers, L.B.

1975-06-01

Studies using high-precision gas chromatography and supercritical fluid chromatography have produced new types of information on liquid crystals and on behavior of substances in the region of the critical temperature, respectively. In addition, the first successful studies of the effects of pressure on cation exchange have been made using aqueous solutions of alkali metal nitrates. In contrast, progress on separations of isotopic species using gas chromatography has been disappointing. In that area, the chief accomplishment has been a determination of the levels of accuracy and precision with which isotopic abundances can be measured using our quadrupole mass spectrometer. (U.S.)

The Michigan high-level radioactive waste program: Final technical progress report

International Nuclear Information System (INIS)

1987-01-01

This report comprises the state of Michigan's final technical report on the location of a proposed high-level radioactive waste disposal site. Included are a list of Michigan's efforts to review the DOE proposal and a detailed report on the application of geographic information systems analysis techniques to the review process

Site characterization progress report: Yucca Mountain, Nevada. Progress report number 17, April 1, 1997--September 30, 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-04-01

The US Department of Energy`s (DOE) Office of Civilian Radioactive Waste Management (OCRWM), created with the enactment of the Nuclear Waste Policy Act of 1982 (NWPA), is tasked to accept and dispose of the nation`s high-level radioactive waste and spent nuclear fuel in a deep geologic repository (high-level radioactive waste program). The report summarizes significant site characterization activities during the period from April 1, 1997 through September 30, 1997, in the evaluation of Yucca Mountain as a potential site for the geologic disposal of spent nuclear fuel and high-level radioactive wastes. The progress report also cites technical reports and research products that provide the detailed information on these activities. Chapter 2 outlines technical and regulatory issues that must be addressed by the Project and planned work toward achieving future objectives concerning the viability assessment, the environmental impact statement, the site recommendation, and the license application. Chapter 3 describes technical progress in preclosure radiological safety analysis, postclosure performance assessment, and performance confirmation activities. Chapter 4 describes various aspects of repository and waste package design and construction. It also discusses the Exploration Studies Facility cross drift. Chapter 5 describes site characterization activities, and Chapter 6 contains a complete list of references.

Site characterization progress report: Yucca Mountain, Nevada. Progress report number 17, April 1, 1997 - September 30, 1997

International Nuclear Information System (INIS)

1998-04-01

The US Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM), created with the enactment of the Nuclear Waste Policy Act of 1982 (NWPA), is tasked to accept and dispose of the nation's high-level radioactive waste and spent nuclear fuel in a deep geologic repository (high-level radioactive waste program). The report summarizes significant site characterization activities during the period from April 1, 1997 through September 30, 1997, in the evaluation of Yucca Mountain as a potential site for the geologic disposal of spent nuclear fuel and high-level radioactive wastes. The progress report also cites technical reports and research products that provide the detailed information on these activities. Chapter 2 outlines technical and regulatory issues that must be addressed by the Project and planned work toward achieving future objectives concerning the viability assessment, the environmental impact statement, the site recommendation, and the license application. Chapter 3 describes technical progress in preclosure radiological safety analysis, postclosure performance assessment, and performance confirmation activities. Chapter 4 describes various aspects of repository and waste package design and construction. It also discusses the Exploration Studies Facility cross drift. Chapter 5 describes site characterization activities, and Chapter 6 contains a complete list of references

Introducing Heuristics of Cultural Dimensions into the Service-Level Technical Communication Classroom

Science.gov (United States)

Schafer, Robert

2009-01-01

A significant problem for practitioners of technical communication is to gain the skills to compete in a global, multicultural work environment. Instructors of technical communication can provide future practitioners with the tools to compete and excel in this global environment by introducing heuristics of cultural dimensions into the…

Significance of technical rules for environmental pollution control

International Nuclear Information System (INIS)

Grefen, K.

1989-01-01

Technical rules for environmental pollution control are very important in times of intensified technical progress and especially in view of the alterations of the legislative basis of the European Market in 1992. In the fields of jurisprudence, science and technology they serve as a decision-making aid for authorities, specialists in plant development and operation and the preparatory stages of international legislation. The topic is explained by the development of guidelines with the VDI-Commission on Air Pollution Prevention. (orig.) [de

Negotiating cultural encounters narrating intercultural engineering and technical communication

CERN Document Server

Yu, Han

2013-01-01

Discusses the challenges of intercultural communication in engineering, technical, and related professional fields Given today's globalized technical and engineering environment, intercultural communication is an essential topic for engineers, other technical professionals, and technical communicators to learn. Engineering programs, in particular, need to think about how to address the ABET requirement for students to develop global competence and communication skills. This book will help readers learn what intercultural communication is like in the workplace-which is an import

TECHNICAL COORDINATION

CERN Multimedia

Austin Ball

Summary of progress since last CMS week. Ten years of construction work have been completed. CMS is closed, in very close to the ideal low luminosity configuration, and performed well in the first tests with LHC beam. Behind this encouraging news is the story of a summer of intense commitment by many teams (from the collaboration and 3 CERN departments) working together, against the clock and despite many minor setbacks, to ensure that the experiment was ready to play a leading role in the excitement of September 10. Following beampipe bakeout and refill with pure neon, a magnificent effort by the ECAL group and the pt 5 technical crew made it possible to install and commission all 4 ECAL endcap Dees before the end of August. In the shadow of this activity, the barrel and forward pixel trackers and part of the beam monitoring were installed within the vac tank. The pt 5 technical teams then succeeded in safely removing the 20t installation tables and their support blocks from beneath the already installed ...

Activity Progress report 1982-1985

International Nuclear Information System (INIS)

1986-01-01

This reports gives a summary of all activities of the Elementary Particle Physics Department at Saclay between the beginning of 1982 and the end of 1985. The experiments in progress or in preparation are presented by subject. The main technical studies and achievements are also described. Finally lists of publications and information concerning Department organization are given [fr

Technical Services in the Age of Electronic Publishing.

Science.gov (United States)

Brownrigg, Edwin; And Others

1984-01-01

Examination of the traditional library technical services functions and how they may change with the advent of widespread computer-based electronic publishing emphasizes ways in which technical services will have to adapt in electronic publishing environment. Implications of electronic publishing for library management and budgeting are explored.…

A Simple extension of Dematerialization Theory: Incorporation of Technical Progress and the Rebound Effect

OpenAIRE

Magee, Christopher L.; Devezas, Tessaleno C.

2016-01-01

Dematerialization is the reduction in the quantity of materials needed to produce something useful over time. Dematerialization fundamentally derives from ongoing increases in technical performance but it can be counteracted by demand rebound - increases in usage because of increased value (or decreased cost) that also results from increasing technical performance. A major question then is to what extent technological performance improvement can offset and is offsetting continuously increasin...

Pacific Northwest Laboratory annual report for 1989 to the Assistant Secretary for Environment, Safety, and Health

International Nuclear Information System (INIS)

Faust, L.G.; Doctor, P.G.; Selby, J.M.

1990-04-01

Part 5 of the 1989 Annual Report to the US Department of Energy's Assistant Secretary for Environment, Safety, and Health presents Pacific Northwest Laboratory's progress on work performed for the Office of Environmental Guidance and Compliance, the Office of Environmental Audit, the Office of National Environmental Policy Act Project Assistance, the Office of Nuclear Safety, the Office of Safety Compliance, and the Office of Policy and Standards. For each project, as identified by the Field Work Proposal, there is an article describing progress made during fiscal year 1989. Authors of these articles represent a broad spectrum of capabilities derived from five of the seven technical centers of the Laboratory, reflecting the interdisciplinary nature of the work. 35 refs., 1 fig

Electronic refrigerant leak detector. Quarterly technical progress report

Energy Technology Data Exchange (ETDEWEB)

Talamas, E. Jr.

1998-10-15

The project comprises three main tasks. They are (1) Develop, design, and fabricate sensors, (2) Develop, design, and fabricate test instruments, (3) Testing and data analysis. The milestone includes 17 sub-tasks for the 52-weeks project period, starting on May 1, 1998 and ending on April 30, 1999. As stated in the Application for Federal Assistance, Micronic intended to relocate to a new office by June of 1998. This decision was delayed, since the first partial payment was transferred on August 12, 1998. Micronic plans to relocate this November. A second Provisional Application for a US patent has been filed. Progress made during this period is reported.

Scientific and technical report, 2000 of the IPSN; Rapport scientifique et technique 2000 de l'IPSN

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

IPSN (Institut de Protection et de Surete Nucleaire) is responsible for dealing with all aspects in the evaluation of safety of nuclear installations involving the human factors. To achieve its objectives, it conducts its own research and development activities on these themes. This report highlights the most significant scientific and technical achievements of the Institut in 2000. Twenty eight reports are presented, grouped in eight sessions, each ones opened by a review paper: the reactors safety, the installations safety, the radioactive materials and transport safety, the public health, the environment protection, the radioactive wastes safety, the crisis management and the IPSN installations. The international research program Phebus PF is detailed, technical progresses concerning the steam generators nondestructive testing or the impact of automation on operator performance are also presented. One session deals with the criticality studies and risk assessment. The control and surveillance of nuclear materials form the subject of research programs and experiments as well as the transport safety. Concerning the public and environment protection inspections, epidemiological studies, radionuclides transportation and radio-contaminant behavior are reported. In the domain of the radioactive wastes safety, the deep underground storage and the model MELODIE are presented. Examples of accidents or the INEX2 exercise are also discussed. (A.L.B.)

Professional Technical Standards in Colleges and Schools of Pharmacy

Science.gov (United States)

Berry, Tricia M.; Chichester, Clinton O.; Sanoski, Cynthia A.; Woodward, Donald A.; Worley, Marcia M.; Early, Johnnie L.

2011-01-01

Objective To determine the prevalence, characteristics, and use of professional technical standards among colleges and schools of pharmacy accredited by the Accreditation Council for Pharmacy Education (ACPE). Methods The Web site of every college and school of pharmacy accredited by ACPE was searched to identify information regarding the availability, content, and use of technical standards and to obtain demographic information. Results Information was obtained from all of the 114 colleges and schools of pharmacy and 67 (59%) had technical standards in place. Common themes for technical standards were: observation; communication; motor; intellectual, conceptual, integrative and quantitative abilities; and behavioral and social attributes. Of those colleges and schools with technical standards, 61 (91%) had standards that addressed all 5 of these themes and 34 (51%) specified that the technical standards were used in their admission, progression, and graduation procedures. Conclusion More than half of the colleges and schools of pharmacy examined in this study have technical standards; however, 41% have yet to develop and implement them. Colleges and schools of pharmacy looking for guidance in technical standards development could use the technical standards themes identified in this study. PMID:21655404

Coal to SNG: Technical progress, modeling and system optimization through exergy analysis

International Nuclear Information System (INIS)

Li, Sheng; Ji, Xiaozhou; Zhang, Xiaosong; Gao, Lin; Jin, Hongguang

2014-01-01

Highlights: • Technical progresses of coal to SNG technologies are reported. • The entire coal to SNG system is modeled. • Coupling between SNG production and power generation is investigated. • Breakthrough points for further energy saving are determined. • System performance is optimized based on the first and second laws of thermodynamics. - Abstract: For both energy security and CO 2 emission reduction, synthetic natural gas (SNG) production from coal is an important path to implement clean coal technologies in China. In this paper, an overview of the progress of coal to SNG technologies, including the development of catalysts, reactor designs, synthesis processes, and systems integration, is provided. The coal to SNG system is modeled, the coupling between SNG production and power generation is investigated, the breakthrough points for further energy savings are determined, and the system performance is optimized based on the first and the second laws of thermodynamics. From the viewpoint of the first law of thermodynamics, the energy conversion efficiency of coal to SNG system can reach 59.8%. To reduce the plant auxiliary power, the breakthrough points are the development of low-energy-consumption oxygen production technology and gas purification technology or seeking new oxidants for coal gasification instead of oxygen. From the viewpoint of the second law of thermodynamics, the major exergy destruction in a coal to SNG system occurs in the coal gasification unit, SNG synthesis unit and the raw syngas cooling process. How to reduce the exergy destruction in these units is the key to energy savings and system performance enhancement. The conversion ratio of the first SNG synthesis reactor and the split ratio of the recycle gas are key factors that determine the performance of both the SNG synthesis process and the whole plant. A “turning point” phenomenon is observed: when the split ratio is higher than 0.90, the exergy destruction of the SNG

Power systems development facility. Quarterly technical progress report, July 1--September 30, 1993

Energy Technology Data Exchange (ETDEWEB)

1993-12-31

This quarterly technical progress report summarizes work completed during the Second Quarter of the Second Budget Period, July 1 through September 30, 1993, under the Department of Energy (DOE) Cooperative Agreement No. DE-FC21-90MC25140 entitled ``Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion.`` The objective of this project is to evaluate hot gas particle control technologies using coal-derived gas streams. This will entail the design, construction, installation, and use of a flexible test facility which can operate under realistic gasification and combustion conditions. The major particulate control device issues to be addressed include the integration of the particulate control devices into coal utilization systems, on-line cleaning techniques, chemical and thermal degradation of components, fatigue or structural failures, blinding, collection efficiency as a function of particle size, and scaleup of particulate control systems to commercial size. The conceptual design of the facility was extended to include a within scope, phased expansion of the existing Hot Gas Cleanup Test Facility Cooperative Agreement to also address systems integration issues of hot particulate removal in advanced coal-based power generation systems. This expansion included the consideration of the following modules at the test facility in addition to the existing Transport Reactor gas source and Hot Gas Cleanup Units: Carbonizer/Pressurized Circulating Fluidized Bed Gas Source. Hot Gas Cleanup Units to mate to all gas streams; Combustion Gas Turbine; and Fuel Cell and associated gas treatment. This expansion to the Hot Gas Cleanup Test Facility is herein referred to as the Power Systems Development Facility (PSDF). The major emphasis during this reporting period was continuing the detailed design of the facility.

Scientific progress as increasing verisimilitude.

Science.gov (United States)

Niiniluoto, Ilkka

2014-06-01

According to the foundationalist picture, shared by many rationalists and positivist empiricists, science makes cognitive progress by accumulating justified truths. Fallibilists, who point out that complete certainty cannot be achieved in empirical science, can still argue that even successions of false theories may progress toward the truth. This proposal was supported by Karl Popper with his notion of truthlikeness or verisimilitude. Popper's own technical definition failed, but the idea that scientific progress means increasing truthlikeness can be expressed by defining degrees of truthlikeness in terms of similarities between states of affairs. This paper defends the verisimilitude approach against Alexander Bird who argues that the "semantic" definition (in terms of truth or truthlikeness alone) is not sufficient to define progress, but the "epistemic" definition referring to justification and knowledge is more adequate. Here Bird ignores the crucial distinction between real progress and estimated progress, explicated by the difference between absolute (and usually unknown) degrees of truthlikeness and their evidence-relative expected values. Further, it is argued that Bird's idea of returning to the cumulative model of growth requires an implausible trick of transforming past false theories into true ones.

Private sector involvement in the US program of technical assistance to IAEA safeguards

International Nuclear Information System (INIS)

Pepper, S.E.; Epel, L.; Maise, G.; Reisman, A.; Skalyo, J.

1995-01-01

The US Program of Technical Assistance to IAEA Safeguards (POTAS) relies on technical expertise found in the U. S private and public sectors. Since 1993, the international Safeguards Project Office (ISPO) has sought to increase the role of the private sector in POTAS. ISPO maintains and continues to develop a database of US companies interested in providing technical expertise to the IAEA. This database is used by ISPO to find appropriate contractors to respond to IAEA requests for technical assistance when the assistance can be provided by the private sector. The private sector is currently providing support in the development of equipment, training, and procedure preparation. POTAS also supports the work of private consultants. This paper discusses ISPO's efforts to identify suitable vendors and discusses conditions that hinder more substantial involvement by the private sector. In addition, the paper will discuss selected projects that are currently in progress and identify common problems that impede the progress and success of tasks performed by the private sector

Progress of the HTR-10 project

International Nuclear Information System (INIS)

Zhong, D.; Xu, Y.

1996-01-01

This paper briefly introduces the main technical features and the design specifications of the HTR-10. Present status and main progress of the license applications, the design and manufacture of the main components and the engineering experiments as well as the construction of the HTR-10 are summarized. (author). 3 tabs

Tanks Focus Area FY98 midyear technical review

Energy Technology Data Exchange (ETDEWEB)

Schlahta, S.N.; Brouns, T.M.

1998-06-01

The Tanks Focus Area (TFA) serves as the DOE`s Office of Environmental Management`s national technology and solution development program for radioactive waste tank remediation. Its technical scope covers the major functions that comprise a complete tank remediation system: waste retrieval, waste pretreatment, waste immobilization, tank closure, and characterization of both the waste and tank with safety integrated into all the functions. In total, 17 technologies and technical solutions were selected for review. The purpose of each review was to understand the state of development of each technology selected for review and to identify issues to be resolved before the technology or technical solution progressed to the next level of maturity. The reviewers provided detailed technical and programmatic recommendations and comments. The disposition of these recommendations and comments and their impact on the program is documented in this report.

Tanks Focus Area FY98 midyear technical review

International Nuclear Information System (INIS)

Schlahta, S.N.; Brouns, T.M.

1998-06-01

The Tanks Focus Area (TFA) serves as the DOE's Office of Environmental Management's national technology and solution development program for radioactive waste tank remediation. Its technical scope covers the major functions that comprise a complete tank remediation system: waste retrieval, waste pretreatment, waste immobilization, tank closure, and characterization of both the waste and tank with safety integrated into all the functions. In total, 17 technologies and technical solutions were selected for review. The purpose of each review was to understand the state of development of each technology selected for review and to identify issues to be resolved before the technology or technical solution progressed to the next level of maturity. The reviewers provided detailed technical and programmatic recommendations and comments. The disposition of these recommendations and comments and their impact on the program is documented in this report

Chemistry of gaseous lower-valent actinide halides. Technical progress report

International Nuclear Information System (INIS)

Hildenbrand, D.L.

1984-01-01

Objective is to provide thermochemical data for key actinide halide and oxyhalide systems. Progress is reported on bond dissociation energies of gaseous ThCl 4 , ThCl 3 , ThCl 2 , and ThCl; bond dissociation energies of ruthenium fluorides; and mass spectroscopy of UF 6

Jet Joint Undertaking. Progress report 1990

International Nuclear Information System (INIS)

1991-03-01

This JET Progress Reports provides an overview summary and puts into context the scientific and technical advances made on JET during 1990. In addition, the Report is supplemented by appendices of contributions (in preprint form) of the more important JET articles published during the year, which set out the details of JET activities

Geothermal Progress Monitor Report No. 2, January/February 1980

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

Progress is reviewed in the following aspects of the program: electrical uses; direct-heat uses; leases; outreach and technical assistance; general activities; legal, institutional, and regulatory activities; and reports and publications. (MHR)

Technical and tactical soccer players' performance in conceptual small-sided games

Directory of Open Access Journals (Sweden)

Cristian Javier Ramirez Lizana

2015-09-01

Full Text Available AbstractConceptual small-sided games (CSSGs may be interesting as a methodology for training soccer players given its connection to the unpredictability that is inherent to soccer. Our aim was investigate, through videogrammetry, if the technical and tactical principles promoted through the adoption of distinct rules from two distinct CSSGs (maintaining ball possession; and progression to the target would actually be achieved. The study included 24 athletes assigned to 6-player teams. Our data showed that the CSSGs' organising principles create situations with differing levels of difficulty that obey the propositions of maintaining ball possession and progression to the target, i.e., CSSGs permit systematic training on technical and tactical components in order to emphasize the concepts adopted in this study in games context. Our data credit the CSSGs for teaching technical and tactical lessons that, when coupled with adequate physical conditioning, can facilitate a player's capacity to merge thoughts and events in different situations.

Simulation-based ureteroscopy skills training curriculum with integration of technical and non-technical skills: a randomised controlled trial.

Science.gov (United States)

Brunckhorst, Oliver; Shahid, Shahab; Aydin, Abdullatif; McIlhenny, Craig; Khan, Shahid; Raza, Syed Johar; Sahai, Arun; Brewin, James; Bello, Fernando; Kneebone, Roger; Khan, Muhammad Shamim; Dasgupta, Prokar; Ahmed, Kamran

2015-09-01

Current training modalities within ureteroscopy have been extensively validated and must now be integrated within a comprehensive curriculum. Additionally, non-technical skills often cause surgical error and little research has been conducted to combine this with technical skills teaching. This study therefore aimed to develop and validate a curriculum for semi-rigid ureteroscopy, integrating both technical and non-technical skills teaching within the programme. Delphi methodology was utilised for curriculum development and content validation, with a randomised trial then conducted (n = 32) for curriculum evaluation. The developed curriculum consisted of four modules; initially developing basic technical skills and subsequently integrating non-technical skills teaching. Sixteen participants underwent the simulation-based curriculum and were subsequently assessed, together with the control cohort (n = 16) within a full immersion environment. Both technical (Time to completion, OSATS and a task specific checklist) and non-technical (NOTSS) outcome measures were recorded with parametric and non-parametric analyses used depending on the distribution of our data as evaluated by a Shapiro-Wilk test. Improvements within the intervention cohort demonstrated educational value across all technical and non-technical parameters recorded, including time to completion (p technical and non-technical skills teaching is both educationally valuable and feasible. Additionally, the curriculum offers a validated simulation-based training modality within ureteroscopy and a framework for the development of other simulation-based programmes.

Quarterly technical progress report, February 1, 1996--April 30, 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-05-28

This report from the Amarillo National REsource Center for PLutonium provides research highlights and provides information regarding the public dissemination of information. The center is a a scientific resource for information regarding the issues of the storage, disposition, potential utilization and transport of plutonium, high explosives, and other hazardous materials generated from nuclear weapons dismantlement. The center responds to informational needs and interpretation of technical and scientific data raised by interested parties and advisory groups. Also, research efforts are carried out on remedial action programs and biological/agricultural studies.

Technical aspects of high converter reactors

International Nuclear Information System (INIS)

1992-02-01

The meeting provided an opportunity to review and discuss national R and D programs, various technical aspects of and worldwide progress in the implementation of high conversion reactors. The meeting was attended by 66 participants from 18 countries and 2 international organizations. 33 papers were presented. A separate abstract was prepared for each of these papers. Refs, figs, tabs, slides and diagram

Radioecology of natural systems in Colorado. Thirteenth technical progress report, May 1, 1974--April 30, 1975

International Nuclear Information System (INIS)

Whicker, F.W.

1975-01-01

Progress is reported on studies on the behavior of fallout radionuclides ( 137 Cs and 90 Sr) in selected organisms and natural ecosystems in Colorado. Components of alpine tundra, montane forests, shortgrass plains, and freshwater lakes and streams are currently under investigation. A study on the effect of gut passage on the mean diameter of monodisperse PuO 2 microspheres was initiated. Studies on plutonium in the terrestrial environs of Rocky Flats were initiated in the summer of 1972. Soil movement measurements were conducted to bear on the question of plutonium stability in contaminated areas. The relative importance of root uptake versus aerial deposition was evaluated in the field utilizing a sod block transplant procedure. The study on radiation effects on shortgrass plains vegetation was continued with emphasis on long-term changes in community structure under chronic irradiation stress and recovery patterns. (U.S.)

[Strategies and mechanisms of soil springtails in adapting lower temperature environment: research progress].

Science.gov (United States)

Liu, Jing; Wang, Yun-Biao; Wu, Dong-Hui

2012-12-01

Low temperature and drought are the main environmental factors threatening the animals living in arctic area and cold temperate regions. To adapt the severe environment, the animals should adopt appropriate strategies. As a group of arthopods with freeze-avoiding strategy, soil springtails have the similar ecological mechanisms and modes of cold resistance/tolerance as insects, manifesting in the cold acclimation and drought tolerance to decrease the damage of ice crystal formation. During cold acclimation, there are a rapid increase of glycerol, a rapid decrease of fucose and glucose, and the production of anti-freeze proteins (AFP) , and exists the inter-transformation of different kinds of lipids to improve the flow of cell membrane to protect the cell from low temperature injury. In addition, soil springtails have their own specific modes and mechanisms to tolerate low temperature stress, mainly the vertical migration under the protection of snow cover and the excretion of ice nucleator from haemolymph, illustrating that it's of significance to research the cryobiology of soil springtails. This paper summarized the modes and mechanisms of soil springtails in tolerating low temperature environment, reviewed the research progress on the eco-physiology of the springtails, discussed the existing problems of the researches on the low temperature tolerance of the springtails, and prospected the research directions of the springtails low temperature ecology under the background of global change.

Scientific and technical report, 2000 of the IPSN; Rapport scientifique et technique 2000 de l'IPSN

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

IPSN (Institut de Protection et de Surete Nucleaire) is responsible for dealing with all aspects in the evaluation of safety of nuclear installations involving the human factors. To achieve its objectives, it conducts its own research and development activities on these themes. This report highlights the most significant scientific and technical achievements of the Institut in 2000. Twenty eight reports are presented, grouped in eight sessions, each ones opened by a review paper: the reactors safety, the installations safety, the radioactive materials and transport safety, the public health, the environment protection, the radioactive wastes safety, the crisis management and the IPSN installations. The international research program Phebus PF is detailed, technical progresses concerning the steam generators nondestructive testing or the impact of automation on operator performance are also presented. One session deals with the criticality studies and risk assessment. The control and surveillance of nuclear materials form the subject of research programs and experiments as well as the transport safety. Concerning the public and environment protection inspections, epidemiological studies, radionuclides transportation and radio-contaminant behavior are reported. In the domain of the radioactive wastes safety, the deep underground storage and the model MELODIE are presented. Examples of accidents or the INEX2 exercise are also discussed. (A.L.B.)

Technical report from Radioactive Waste Management Funding and Research Center

International Nuclear Information System (INIS)

2007-10-01

As the only one Japanese organization specialized in radioactive waste, RWMC (Radioactive Waste Management Funding and Research Center) has been conducting the two major roles; R and D and the fund administration for radioactive waste management. The focus of its studies includes land disposal of LLW (Low-level radioactive wastes) and it has gradually extended to research on management and disposal techniques for high-level (HLW) and TRU wastes and studies on securing and managing the funds required for disposal of these wastes. The present document is the yearly progress report of 2006 and the main activities and research results are included on spent fuel disposal techniques including radon diffusion and emanation problem, performance studies on underground facilities for radioactive waste disposal and its management, technical assessment for geological environment, remote control techniques, artificial barrier systems proposed and its monitoring systems, and TRU disposals. (S. Ohno)

Proceedings: Computer Science and Data Systems Technical Symposium, volume 1

Science.gov (United States)

Larsen, Ronald L.; Wallgren, Kenneth

1985-01-01

Progress reports and technical updates of programs being performed by NASA centers are covered. Presentations in viewgraph form are included for topics in three categories: computer science, data systems and space station applications.

The 1988 progress report of the Nuclear Safety and Protection Institut

International Nuclear Information System (INIS)

Anon.

1988-01-01

The 1988 progress report of the Nuclear Safety and Protection Institut (CEA, France). The Institute's fields of action involve: The activities and technical safety of the nuclear power plants, the environmental and human radiation protection which includes technical, health and medical aspects, the nuclear materials compatibility and control and the accident intervention actions. The 1988 Institute activities are characterized by the continuity of the previous technical safety directives, by the improvement of the nuclear risk communication and of the international cooperation [fr

Development of JNC geological disposal technical information integration system for geological environment field

International Nuclear Information System (INIS)

Tsuchiya, Makoto; Ueta, Shinzo; Ohashi, Toyo

2004-02-01

Enormous data on geology, geological structure, hydrology, geochemistry and rock properties should be obtained by various investigation/study in the geological disposal study. Therefore, 'JNC Geological Disposal Technical Information Integration System for Geological Environment Field' was developed in order to manage these data systematically and to support/promote the use of these data for the investigators concerned. The system is equipped with data base to store the information of the works and the background information of the assumptions built up in the works on each stage of data flow ('instigative', → 'data sampling' → interpretation' → conceptualization/modeling/simulation' → 'output') in the geological disposal study. In this system the data flow is shown as 'plan' composed of task' and 'work' to be done in the geological disposal study. It is possible to input the data to the database and to refer data from the database by using GUI that shows the data flow as 'plan'. The system was installed to the server computer possessed by JNC and the system utilities were checked on both the server computer and client computer also possessed by JNC. (author)

100 Areas technical activities report, engineers - March 1951

Energy Technology Data Exchange (ETDEWEB)

1951-04-01

This is the monthly 100 areas technical activities report from the engineering division for the month of March 1951. It reports on engineering activities related directly to the different production reactors, and gives progress reports on various engineering projects which are in development by the engineering group.

Development and progress: advancing towards environmental crisis

International Nuclear Information System (INIS)

Gomez G, Luis Jair

2011-01-01

Physical, biological and social evolution is doubtless. One of its first manifestations is the arrival of technique when hominids emerge from pre-hominids. Those first technical developments implied a new relation man/environment that was expressed in three components that appeared successively and pushed each other in time and space like this: dominion over nature, population concentration (urbanism), and population growth. Techniques are to generate three notorious effects on the relation man/nature: 1. Deep intervention on the physical environment: mining and industrial transformation processes; 2. Deep intervention on the biological environment: development of agriculture with a decrease in biodiversity; and 3. Deep intervention on the social environment: going from a pre-modern communitarian world, to the individualism of modernity; and from the agrarian field to the big city. All these technical developments boosted dominion of the technosphere over the ecosphere, which led to the appearance of the Environmental Crisis, whose most notable manifestation is Climatic Change.

Bioethics for Technical Experts

Science.gov (United States)

Asano, Shigetaka

Along with rapidly expanding applications of life science and technology, technical experts have been implicated more and more often with ethical, social, and legal problems than before. It should be noted that in this background there are scientific and social uncertainty elements which are inevitable during the progress of life science in addition to the historically-established social unreliability to scientists and engineers. In order to solve these problems, therefore, we should establish the social governance with ‘relief’ and ‘reliance’ which enables for both citizens and engineers to share the awareness of the issues, to design social orders and criterions based on hypothetical sense of values for bioethics, to carry out practical use management of each subject carefully, and to improve the sense of values from hypothetical to universal. Concerning these measures, the technical experts can learn many things from the present performance in the medical field.

Final Technical Progress Report Long term risk from actinides in the environment: Modes of mobility; FINAL

International Nuclear Information System (INIS)

Thomas B. Kirchner

2002-01-01

The key source of uncertainty in assessing actinide mobility is the relative importance of transport by: (1) wind erosion, (2) water erosion, and (3) vertical migration. Each of these three processes depends on several environmental factors and they compete with one another. A scientific assessment of the long-term risks associated with actinides in surface soils depends on better quantifying each of these three modes of mobility. The objective from our EMSP study was to quantify the mobility of soil actinides by wind erosion, water erosion, and vertical migration at three semiarid sites where actinide mobility is a key technical, social and legal issue. This EMSP project was the first to evaluate all three factors at a site. The approach has been to investigate both short- and long-term issues based on field and lab studies and model comparisons. Our results demonstrate the importance of incorporating threshold responses into a modeling framework that accounts for environmental factors and natural disturbances that trigger large changes in actinide mobility. The study measured erosional losses of sediment and fallout cesium (an actinide analogue) from field plots located near WIPP in 1998. The results highlight the large effect of burning as a disturbance on contaminant transport and mobility via runoff and erosion. The results show that runoff, erosion, and actinide transport are (1) strongly site specific-differences in radionuclide transport between WIPP and Rocky Flats differed by a factor of twelve because of soil and vegetation differences, and (2) are strongly impacted by disturbances such as fire, which can increase runoff, erosion, and actinide transport by more than an order of magnitude. In addition, a laboratory experiment using soil columns was conducted to investigate the vertical transport of contaminants in sandy soils. Nine columns of soil collected from the vicinity of the WIPP site were prepared. The column consisted of a piece of PVC pipe 20 cm

Technical Progress and Development Directions of Oceanic Spatial Information Datum

Directory of Open Access Journals (Sweden)

BAO Jingyang

2017-10-01

Full Text Available This paper briefly analyzes the basic development and technical situation of oceanic spatial information datum, reviews the main processes of oceanic vertical datum and correlative oceanic tidal study, such as improvement and perfect methods of determining tidal station vertical datum, realizing form of vertical datum controlled by tidal station, effect on maintaining vertical datum by long-term tidal station, oceanic tidal model establishing, and also construction and transformation of tidal datum, and then forecasts the key development directions of oceanic spatial information datum on high-accuracy marine position service, vertical datum and the transferring model refinement and spatial datum application.

Bench-scale testing of on-line control of column flotation using a novel analyzer. Third quarterly technical progress report, April 1, 1993--June 30, 1993

Energy Technology Data Exchange (ETDEWEB)

1993-08-24

This document contains the third quarterly technical progress report for PTI`s Bench-Scale Testing Project of a circuit integrating PTI`s KEN-FLOTETM Column Flotation Technology and PTI`s On-Line Quality Monitor and Control System. The twelve-month project involves installation and testing of a 200--300 lb/hr. bench-scale flotation circuit at PETC`s Coal Preparation Process Research Facility (CPPRF) for two bituminous coals (Upper Freeport and Pittsburgh No. 8 Seam Raw Coals). Figure 1 contains the project plan, as well as the approach to completing the major tasks within the twelve-month project schedule. The project is broken down into three phases, which include: Phase I -- Preparation: The preparation phase was performed principally at PTI`s Calumet offices from October through December, 1992. It involved building of the equipment and circuitry, as well as some preliminary design and equipment testing; Phase II -- ET Circuit Installation and Testing: This installation and testing phase of the project was performed at PETC`s CPPRF from January through June, 1993, and was the major focus of the project. It involved testing of the continuous 200--300 lb/hr. circuit; and Phase III -- Project Finalization: The project finalization phase is occurring from July through September, 1993, at PTI`s Calumet offices and involves finalizing analytical work and data evaluation, as well as final project reporting. This Third Quarterly Technical Progress Report principally summarizes the results from the benchscale testing with the second coal (Pittsburgh No. 8 Seam Coal), which occurred in April through June, 1993. It also contains preliminary economic evaluations that will go into the Final Report, as well as the plan for the final reporting task.

Fusion materials semiannual progress report for the period ending December 31, 1997

International Nuclear Information System (INIS)

Burn, G.

1998-03-01

This is the twenty-third in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components. This effort forms one element of the materials program being conducted in support of the Fusion Energy Sciences Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Materials Program is a national effort involving several national laboratories, universities, and industries. A large fraction of this work, particularly in relation to fission reactor experiments, is carried out collaboratively with their partners in Japan, Russia, and the European Union. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide

Proceedings: Computer Science and Data Systems Technical Symposium, volume 2

Science.gov (United States)

Larsen, Ronald L.; Wallgren, Kenneth

1985-01-01

Progress reports and technical updates of programs being performed by NASA centers are covered. Presentations in viewgraph form, along with abstracts, are included for topics in three catagories: computer science, data systems, and space station applications.

Sensitivity of climate change mitigation estimates to assumptions about technical change

International Nuclear Information System (INIS)

Dowlatabadi, H.

1998-01-01

With greater certainty in anthropogenic influence on observed changes in climate there is increasing pressure for agreements to control emissions of greenhouse gases ([HOUGHTON]). While it is difficult to assess the appropriate level of mitigation, it has been argued that flexibility in meeting emission targets offers significant economic savings. Such flexibility can be exercised in terms of timing of mitigation (i.e. delay) or geographic location of the intervention (e.g. permit trading and Joint-Implementation). Much of this insight is based on standard models of technical change in energy supply and demand. However, standard model formulations rarely consider: (i) a link between the pattern of technical change and policy interventions; (ii) economies of learning; and (iii) technical progress in discovery and recovery of oil and gas. While there is evidence to support the importance of these factors in historic patterns of technical progress, the data necessary to calibrate internally consistent economic models of these phenomena have not been available. In this paper simple representations of endogenous and induced technical change have been used to explore the sensitivity of mitigation cost estimates to how technical change is represented in energy economics models. The scenarios involve control of CO 2 emissions to limit its concentration to no more than 550 ppm(v), starting in the year 2000, and delayed to 2025. This sensitivity analysis has revealed four robust insights: (i) If endogenous technical change is assumed, expected business as usual emissions are higher than otherwise estimated - nevertheless, while 25% greater CO 2 control is required for meeting the CO 2 concentration target, the cost of mitigation is 40% lower; (ii) If technical progress in oil and gas discovery and recovery is assumed, energy use and CO 2 emissions increase by 75% and 65%, respectively above the standard estimates; (iii) If the economies of learning exhibited in various

Ozone Layer Research and Technical Resources

Science.gov (United States)

Access information on research and technical resources related to ozone layer science. This page provides links to research efforts led by organizations such as the National Oceanic and Atmospheric Administration, the United Nations Environment Program, an

Technology Development, Evaluation, and Application (TDEA) FY 2001 Progress Report Environment, Safety, and Health (ESH) Division

Energy Technology Data Exchange (ETDEWEB)

L.G. Hoffman; K. Alvar; T. Buhl; E. Foltyn; W. Hansen; B. Erdal; P. Fresquez; D. Lee; B. Reinert

2002-05-01

This progress report presents the results of 11 projects funded ($500K) in FY01 by the Technology Development, Evaluation, and Application (TDEA) Committee of the Environment, Safety, and Health Division (ESH). Five projects fit into the Health Physics discipline, 5 projects are environmental science and one is industrial hygiene/safety. As a result of their TDEA-funded projects, investigators have published sixteen papers in professional journals, proceedings, or Los Alamos reports and presented their work at professional meetings. Supplement funds and in-kind contributions, such as staff time, instrument use, and workspace, were also provided to TDEA-funded projects by organizations external to ESH Divisions.

Technology Development, Evaluation, and Application (TDEA) FY 1999 Progress Report, Environment, Safety, and Health (ESH) Division

International Nuclear Information System (INIS)

Hoffman, Larry G.

2000-01-01

This progress report presents the results of 10 projects funded ($500K) in FY99 by the Technology Development, Evaluation, and Application (TDEA) Committee of the Environment, Safety, and Health Division. Five are new projects for this year; seven projects have been completed in their third and final TDEA-funded year. As a result of their TDEA-funded projects, investigators have published thirty-four papers in professional journals, proceedings, or Los Alamos reports and presented their work at professional meetings. Supplemental funds and in-kind contributions, such as staff time, instrument use, and work space, were also provided to TDEA-funded projects by organizations external to ESH Division

Technology Development, Evaluation, and Application (TDEA) FY 1999 Progress Report, Environment, Safety, and Health (ESH) Division

Energy Technology Data Exchange (ETDEWEB)

Larry G. Hoffman

2000-12-01

This progress report presents the results of 10 projects funded ($500K) in FY99 by the Technology Development, Evaluation, and Application (TDEA) Committee of the Environment, Safety, and Health Division. Five are new projects for this year; seven projects have been completed in their third and final TDEA-funded year. As a result of their TDEA-funded projects, investigators have published thirty-four papers in professional journals, proceedings, or Los Alamos reports and presented their work at professional meetings. Supplemental funds and in-kind contributions, such as staff time, instrument use, and work space, were also provided to TDEA-funded projects by organizations external to ESH Division.

World progress toward fusion energy

International Nuclear Information System (INIS)

Davies, N.A.

1989-01-01

The author discusses international progress in fusion research during the last three years. Much of the technical progress has been achieved through international collaboration in magnetic fusion research. This progress has stimulated political interest in a multinational effort, aimed at designing and possibly constructing the world's first experimental fusion reactor. This interest was reflected in recent summit-level discussions involving President Mitterand, General Secretary Gorbachev, and President Reagan. Most recently, the European Community (EC), Japan, the United States, and the U.S.S.R. have decided to begin serious preparation for taking the next step toward practical fusion energy. These parties have agreed to begin the design and supporting R and D for an International Thermonuclear Experimental Reactor (ITER) under the auspices of the International Atomic Energy Agency (IAEA). The initiation of this international program to prepare for a fusion test reactor is discussed

ANL Technical Support Program for DOE Environmental Restoration and Waste Management. Annual report, October 1992--September 1993

International Nuclear Information System (INIS)

Bates, J.K.; Bourcier, W.L.; Bradley, C.R.

1994-06-01

This report is an overview of the progress during FY 1993 for the Technical Support Program that is part of the ANL Technology Support Activity for DOE Environmental Restoration and Waste Management (EM). The purpose is to evaluate, before hot start-up of the Defense Waste Processing Facility (DWPF) and the West Valley Demonstration Project (WVDP), factors that are anticipated to affect glass reaction in an unsaturated environment typical of what may be expected for the candidate Yucca Mountain repository site. Specific goals for the testing program include the following: reviewing and evaluating available data on parameters that will be important in establishing the long-term performance of glass in a repository environment; performing tests to further quantify the effects of important variables where there are deficiencies in the available data; and initiating long-term tests to determine glass performance under a range of conditions applicable to repository disposal

US/Japan collaborative program on fusion reactor materials: Summary of the tenth DOE/JAERI Annex I technical progress meeting on neutron irradiation effects in first wall and blanket structural materials

International Nuclear Information System (INIS)

Rowcliffe, A.F.

1989-01-01

This meeting was held at Oak Ridge National Laboratory on March 17, 1989, to review the technical progress on the collaborative DOE/JAERI program on fusion reactor materials. The purpose of the program is to determine the effects of neutron irradiation on the mechanical behavior and dimensional stability of US and Japanese austenitic stainless steels. Phase I of the program focused on the effects of high concentrations of helium on the tensile, fatigue, and swelling properties of both US and Japanese alloys. In Phase II of the program, spectral and isotropic tailoring techniques are fully utilized to reproduce the helium:dpa ratio typical of the fusion environment. The Phase II program hinges on a restart of the High Flux Isotope Reactor by mid-1989. Eight target position capsules and two RB* position capsules have been assembled. The target capsule experiments will address issues relating to the performance of austenitic steels at high damage levels including an assessment of the performance of a variety of weld materials. The RB* capsules will provide a unique and important set of data on the behavior of austenitic steels irradiated under conditions which reproduce the damage rate, dose, temperature, and helium generation rate expected in the first wall and blanket structure of the International Thermonuclear Experimental Reactor

Scaffolding Collaborative Technical Writing with Procedural Facilitation and Synchronous Discussion

Science.gov (United States)

Yeh, Shiou-Wen; Lo, Jia-Jiunn; Huang, Jeng-Jia

2011-01-01

With the advent of computer technology, researchers and instructors are attempting to devise computer support for effective collaborative technical writing. In this study, a computer-supported environment for collaborative technical writing was developed. This system (Process-Writing Wizard) provides process-oriented scaffolds and a synchronous…

Increasing Student Interaction in Technical Writing Courses in Online Environments

Science.gov (United States)

Virtue, Drew

2017-01-01

This article examines how the levels of student interaction change through the use of small groups and moderators in online writing courses. The study examines three technical and professional online writing courses: one course that employs small groups and group moderators and two courses that have no small groups or moderators. The results of…

Gas Test Loop Functional and Technical Requirements

International Nuclear Information System (INIS)

Glen R. Longhurst; Soli T. Khericha; James L. Jones

2004-01-01

This document defines the technical and functional requirements for a gas test loop (GTL) to be constructed for the purpose of providing a high intensity fast-flux irradiation environment for developers of advanced concept nuclear reactors. This capability is needed to meet fuels and materials testing requirements of the designers of Generation IV (GEN IV) reactors and other programs within the purview of the Advanced Fuel Cycle Initiative (AFCI). Space nuclear power development programs may also benefit by the services the GTL will offer. The overall GTL technical objective is to provide developers with the means for investigating and qualifying fuels and materials needed for advanced reactor concepts. The testing environment includes a fast-flux neutron spectrum of sufficient intensity to perform accelerated irradiation testing. Appropriate irradiation temperature, gaseous environment, test volume, diagnostics, and access and handling features are also needed. This document serves to identify those requirements as well as generic requirements applicable to any system of this kind

Gas Test Loop Functional and Technical Requirements

Energy Technology Data Exchange (ETDEWEB)

Glen R. Longhurst; Soli T. Khericha; James L. Jones

2004-09-01

This document defines the technical and functional requirements for a gas test loop (GTL) to be constructed for the purpose of providing a high intensity fast-flux irradiation environment for developers of advanced concept nuclear reactors. This capability is needed to meet fuels and materials testing requirements of the designers of Generation IV (GEN IV) reactors and other programs within the purview of the Advanced Fuel Cycle Initiative (AFCI). Space nuclear power development programs may also benefit by the services the GTL will offer. The overall GTL technical objective is to provide developers with the means for investigating and qualifying fuels and materials needed for advanced reactor concepts. The testing environment includes a fast-flux neutron spectrum of sufficient intensity to perform accelerated irradiation testing. Appropriate irradiation temperature, gaseous environment, test volume, diagnostics, and access and handling features are also needed. This document serves to identify those requirements as well as generic requirements applicable to any system of this kind.

Nurses' role transition from the clinical ward environment to the critical care environment.

Science.gov (United States)

Gohery, Patricia; Meaney, Teresa

2013-12-01

To explore the experiences of nurses moving from the ward environment to the critical care environment. Critical care areas are employing nurses with no critical care experience due to staff shortage. There is a paucity of literature focusing on the experiences of nurses moving from the ward environment to the critical care environment. A Heideggerian phenomenology research approach was used in this study. In-depth semi structured interviews, supported with an interview guide, were conducted with nine critical care nurses. Data analysis was guided by Van Manen (1990) approach to phenomenological analysis. Four main themes emerged: The highs and lows, you need support, theory-practice gap, struggling with fear. The participants felt ill prepared and inexperienced to work within the stressful and technical environment of critical care due to insufficient education and support. The study findings indicated that a variety of feelings and emotions are experienced by ward nurses who move into the stressful and technical environment of critical care due to insufficient skills and knowledge. More education and support is required to improve this transition process. Copyright © 2013 Elsevier Ltd. All rights reserved.

Fifth technical meeting on quality

International Nuclear Information System (INIS)

Girard, A.

1998-01-01

This article reports on the 5th Technical Meeting on Quality which was held in San Diego on 20-22 October 1997 and which was attended by representatives of the Home and Joint Central Team and of manufacturers currently involved in the Large R and D projects. The meeting made progress towards the finalization of the ITER Quality Manual document for inclusion in the Final Design Report and the definition of the quality necessary for ITER procurement and construction

TECHNICAL COORDINATION

CERN Document Server

A. Ball and W. Zeuner

2013-01-01

For the reporting period, the CMS common systems and infrastructure worked well, without failures that caused significant data losses. One more disconnection of the magnet cold box occurred in the shadow of interruptions in data taking, caused by a series of technical faults. The recognition during 2012 that re-connection can only safely be done at around 2 T implies a minimum magnet recovery time of 12 hours and raises serious concerns about the number of ramping cycles of the magnet these incidents cause. This has triggered studies of how to make the cryo-system of the magnet more robust against failures. The proton-proton run ended just before the end-of-year CERN closure, during which CASTOR was installed on the negative end of CMS and both ZDC calorimeters were installed in TAN absorbers the LHC tunnel, in preparation for the heavy-ion run. The installation of CASTOR was an excellent “engineering test” of procedures for working in an activated environment. Despite some technical pr...

Environmental Research Division technical progress report: January 1986--October 1987

International Nuclear Information System (INIS)

1988-07-01

Technical process in the various research activities of Argonne National Laboratory's Environmental Research Division is reported for the period 1986-1987. Textual, graphic, and tabular information is used to briefly summarize (in separate chapters) the work of the Division's Atmospheric Physics, Environmental Effects Research, Fundamental Molecular Physics and Chemistry, and Organic Geochemistry and Environmental Instrumentation Programs. Information on professional qualifications, awards, and outstanding professional activities of staff members, as well as lists of publications, oral presentations, special events organized, and participants in educational programs, are provided in appendices at the end of each chapter. Individual projects under each division are processed separately for the data bases

Environmental Research Division technical progress report: January 1986--October 1987

Energy Technology Data Exchange (ETDEWEB)

1988-07-01

Technical process in the various research activities of Argonne National Laboratory's Environmental Research Division is reported for the period 1986-1987. Textual, graphic, and tabular information is used to briefly summarize (in separate chapters) the work of the Division's Atmospheric Physics, Environmental Effects Research, Fundamental Molecular Physics and Chemistry, and Organic Geochemistry and Environmental Instrumentation Programs. Information on professional qualifications, awards, and outstanding professional activities of staff members, as well as lists of publications, oral presentations, special events organized, and participants in educational programs, are provided in appendices at the end of each chapter. Individual projects under each division are processed separately for the data bases.

Exploring the Benefits of Teacher-Modeling Strategies Integrated into Career and Technical Education

Science.gov (United States)

Cathers, Thomas J., Sr.

2013-01-01

This case study examined how career and technical education classes function using multiple instructional modeling strategies integrated into vocational and technical training environments. Seven New Jersey public school technical teachers received an introductory overview of the investigation and participated by responding to 10 open-end…

Waste management progress report

International Nuclear Information System (INIS)

1997-06-01

During the Cold War era, when DOE and its predecessor agencies produced nuclear weapons and components, and conducted nuclear research, a variety of wastes were generated (both radioactive and hazardous). DOE now has the task of managing these wastes so that they are not a threat to human health and the environment. This document is the Waste Management Progress Report for the U.S. Department of Energy dated June 1997. This progress report contains a radioactive and hazardous waste inventory and waste management program mission, a section describing progress toward mission completion, mid-year 1997 accomplishments, and the future outlook for waste management

Technical writing versus technical writing

Science.gov (United States)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

Inertial fusion research: Annual technical report, 1985

International Nuclear Information System (INIS)

Larsen, J.T.; Terry, N.C.

1986-03-01

This report describes the inertial confinement fusion (ICF) research activities undertaken at KMS Fusion (KMSF) during 1985. It is organized into three main technical sections; the first covers fusion experiments and theoretical physics, the second is devoted to progress in materials development and target fabrication, and the third describes laser technology research. These three individual sections have been cataloged separately

Yucca Mountain Project technical status report (TSR), October 1989--March 1990

International Nuclear Information System (INIS)

1990-01-01

This Yucca Mountain Project Technical Status Report (TSR) on site characterization is the second in a series of reports that will be issued at approximately six-month intervals during site characterization. In addition, progress made toward the initiation and conduct of new site characterization activities is included. For this report, information on the technical progress made by Yucca Mountain Project participating organizations has been compiled covering the period from October 1989, through March 31, 1990. The status report consists of three sections: an introductory section; a section on the status of site characterization, which includes preparatory activities, sites programs, repository design, seals system design, waste package design, and performance assessment; and a reference section, which provides a complete listing of all published documents cited in the text. 59 refs

A Portfolio Analysis Tool for Measuring NASAs Aeronautics Research Progress toward Planned Strategic Outcomes

Science.gov (United States)

Tahmasebi, Farhad; Pearce, Robert

2016-01-01

Description of a tool for portfolio analysis of NASA's Aeronautics research progress toward planned community strategic Outcomes is presented. The strategic planning process for determining the community Outcomes is also briefly described. Stakeholder buy-in, partnership performance, progress of supporting Technical Challenges, and enablement forecast are used as the criteria for evaluating progress toward Outcomes. A few illustrative examples are also presented.

Energy and environment

International Nuclear Information System (INIS)

This is a study on the understanding of inpending scientific, technical, and economic problems as well as the standards and criteria that have to be set from a Christian point of view in order to serve an ethics of progress. In the field of energy demand and its coverage, security and environmental impacts of energy conversion, and of the securing of energy supply, 12 theses are laid down. Among other things they vote for the further development of nuclear energy utilization - with circumspection and caution, however -, for new technologies, technical improvements, the electrification of coal, and for better information of the citizens. The development of the THTR-300 reactor ought to be urged. (HSCH) [de

Progress of the radioactive waste management at the Dalat Nuclear Research Institute and the role of an IAEA technical co-operation project in this process

International Nuclear Information System (INIS)

Nang, N.T.; Ngoc, O.V.; Nhu Thuy, T.T.; Nghi, D.V.; Thu, N.T.

2002-01-01

At present, the main radioactive waste generator in Vietnam is the Dalat Nuclear Research Institute (DNRI). For safe management of radioactive waste generated from this nuclear center, in 1982 Soviet specialists newly constructed one combined technology system for low level radioactive waste management. The existing system consists of two main parts, a Liquid Radioactive Waste Treatment Station and a Storage/Disposal Facility. The liquid treatment station can in principle meet the needs for this nuclear center but disposal technology and storage/disposal facilities are not good enough both with respect to safety and economy, especially the storage/disposal facility placed in Dalat, the tourist city. In order to help DNRI and Vietnam to solve the radioactive waste management problem, the IAEA Technical Co-operation (TC) project VIE/9/007 was implemented in Vietnam. The facilities and IAEA experts provided under this project gradually help to develop radioactive waste management at DNRI, Vietnam. This paper outlines progress under way in the management of the radioactive waste at the Nuclear Research Institute (NRI), Dalat, Vietnam, and the role of the IAEA Technical Co-operation (TC) project in this process. (author)

Analytical Chemistry Division annual progress report for period ending December 31, 1979

International Nuclear Information System (INIS)

Shults, W.D.; Lyon, W.S.

1980-05-01

The progress is reported in the following sections: analytical methodology, mass and emission spectrometry, technical support, bio-organic analysis, nuclear and radiochemical analysis, and quality assurance

Progress Report. Teilinstitut Nukleare Festkoerperphysik

International Nuclear Information System (INIS)

Kaefer, K.

1978-10-01

This Progress Report of the Teilinstitut Nukleare Festkoerperphysik covers the work done at the Institute during the period from June 1, 1977 to May 31, 1978. The main research areas presently under investigation are underlined by the arrangement of the report: structure and dynamics of solids, electronic structure and magnetism of solids, and the development and investigation of novel materials. Some technical developments important in carrying out this research are included as well. (orig.) [de

Assessing Progress in Mastery of Counseling Communication Skills

NARCIS (Netherlands)

A.J. Kuntze (Jeroen)

2009-01-01

textabstractDuring the last century the attention paid in higher education to the development of professional skills has progressively increased. In the first half of the last century the term ‘skill’ mainly referred to motor or technical actions, for instance driving a car or operating a machine

Technical Assessment of Cryo-Compressed Hydrogen Storage Tank Systems for Automotive Applications

Energy Technology Data Exchange (ETDEWEB)

Ahluwalia, Rajesh [Argonne National Lab. (ANL), Argonne, IL (United States); Hua, T. Q. [Argonne National Lab. (ANL), Argonne, IL (United States); Peng, J. -K. [Argonne National Lab. (ANL), Argonne, IL (United States); Lasher, S. [TIAX LLC, Lexington, MA (United States); McKenney, Kurtis [TIAX LLC, Lexington, MA (United States); Sinha, J. [TIAX LLC, Lexington, MA (United States)

2009-12-01

Technical report describing DOE's second assessment report on a third generation (Gen3) system capable of storing hydrogen at cryogenic temperatures within a pressure vessel on-board a vehicle. The report includes an overview of technical progress to date, including the potential to meet DOE onboard storage targets, as well as independent reviews of system cost and energy analyses of the technology paired with delivery costs.

Technical and Social Environments of Electronic Publishing in Japan.

Science.gov (United States)

Nakamoto, Hideshiro

1988-01-01

Discusses the feasibility of introducing electronic publishing into traditional Japanese markets within the context of recent progress in other technologies and mass communications in that country. It is suggested that the content and quality of publications, rather than the media by which they are presented, will determine the acceptance of…

Consolidated fuel reprocessing program. Progress report, July 1-September 30, 1981

International Nuclear Information System (INIS)

1981-12-01

Technical progress is reported in overview fashion in the following areas: process development, laboratory R and D, engineering research, engineering systems, integrated equipment test facility (IET) operations, and HTGR fuel reprocessing

Progress in radiocarbon dating

International Nuclear Information System (INIS)

Hedges, R.E.M.

1985-01-01

The article concerns radiocarbon dating, the most important method for dating in archaeology. The principles and practice of the dating method are described. Recent developments in radiocarbon dating due to technical advances, are discussed, and include radiometric counting of small samples and accelerator mass spectrometry. Carbon isotopes and the environment are also discussed. (U.K.)

Technical and economic feasibility of membrane technology. Fourth technical progress report, June 17-September 16, 1980

Energy Technology Data Exchange (ETDEWEB)

Sandre, A.

1980-10-01

Progress is reported on the investigation of the potential application of reverse osmosis, ultrafiltration and electrodialysis to the system of solids concentration in beet sugar process streams. During this period, emphasis was put on running reverse osmosis tests with a new prototype machine to select the most suitable membranes for the concentrating of sugar solutions. An economic analysis of using reverse osmosis in a factory producing 10/sup 6/ gal/day of thin juice is discussed. (DMC)

Analytical Chemistry Division annual progress report for period ending December 31, 1979

Energy Technology Data Exchange (ETDEWEB)

Shults, W.D.; Lyon, W.S. (ed.)

1980-05-01

The progress is reported in the following sections: analytical methodology, mass and emission spectrometry, technical support, bio-organic analysis, nuclear and radiochemical analysis, and quality assurance. (DLC)

A palliative environment

DEFF Research Database (Denmark)

Timmermann, Connie; Uhrenfeldt, Lisbeth; Høybye, Mette Terp

2015-01-01

The findings show a tension between clinical and technical sensory impressions and more aesthetic ones in the hospital environment. Aesthetic elements in an environment dominated by many clinical impressions proved important for the patients’ positive thoughts and feelings. Aesthetic sensory...... impressions caused a sense of homeliness and familiarity in the hospital environment that was perceived by the patients as carrying a positive meaning. Clinical impressions, on the other hand, were generally associated with unfamiliarity and insecurity and were experienced as creating a negative mood....

Development of a high-fidelity numerical model for hazard prediction in the urban environment

International Nuclear Information System (INIS)

Lien, F.S.; Yee, E.; Ji, H.; Keats, A.; Hsieh, K.J.

2005-01-01

The release of chemical, biological, radiological, or nuclear (CBRN) agents by terrorists or rogue states in a North American city (densely populated urban centre) and the subsequent exposure, deposition, and contamination are emerging threats in an uncertain world. The transport, dispersion, deposition, and fate of a CBRN agent released in an urban environment is an extremely complex problem that encompasses potentially multiple space and time scales. The availability of high-fidelity, time-dependent models for the prediction of a CBRN agent's movement and fate in a complex urban environment can provide the strongest technical and scientific foundation for support of Canada's more broadly based effort at advancing counter-terrorism planning and operational capabilities. The objective of this paper is to report the progress of developing and validating an integrated, state-of-the-art, high-fidelity multi-scale, multi-physics modeling system for the accurate and efficient prediction of urban flow and dispersion of CBRN materials. Development of this proposed multi-scale modeling system will provide the real-time modeling and simulation tool required to predict injuries, casualties, and contamination and to make relevant decisions (based on the strongest technical and scientific foundations) in order to minimize the consequences of a CBRN incident based on a pre-determined decision making framework. (author)

Nuclear Safety: Technical progress review, January--March 1989

Energy Technology Data Exchange (ETDEWEB)

Silver, E. G. [ed.

1989-01-01

This review journal covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

Nuclear Safety: Technical progress review, January-March 1988

Energy Technology Data Exchange (ETDEWEB)

Silver, E G [ed.

1988-01-01

This journal covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

TESTING CORPORATE ENTREPRENEURSHIP ASSESSMENT INSTRUMENT IN TRANSITION ENVIRONMENT

OpenAIRE

Kontić, Ljiljana; Vidicki, Djordje; Domanović, Violeta

2017-01-01

The key issue in comtemporary business environment is how to acquire and maintain the competitive advantage in the long term. In that sense, the organizations must seek for something new in their functioning, new products, services, suppliers, customers, distribution channels, markets, new marketing, organizational and other technical and non-technical solutions. Corporate entrepreneurship (CE) is critical to a firm's success, particurarly in today's dynamic environment. The main aim of this ...

JET Joint Undertaking. Progress report 1991 - volume 1

International Nuclear Information System (INIS)

1992-04-01

The ninth JET Progress Report provides an overview summary and puts into context the scientific and technical advances made on JET during 1991. The report contains a brief summary of the background to the project, and describes the basic objectives of JET and the principal design aspects of the machine

Fusion materials semiannual progress report for period ending June 30, 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-08-01

This is the twenty-second in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components. This effort forms one element of the materials program being conducted in support of the Fusion Energy Sciences Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. Topics covered here are: vanadium alloys; silicon carbide composites; ferritic/martensitic steels; austenitic stainless steels; insulating ceramics and optical materials; solid breeding materials; radiation effects mechanistic studies and experimental methods; dosimetry damage parameters; activation calculations; materials engineering and design requirements; irradiation facilities; test matrices; and experimental methods.

Fusion materials semiannual progress report for period ending June 30, 1997

International Nuclear Information System (INIS)

1997-08-01

This is the twenty-second in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components. This effort forms one element of the materials program being conducted in support of the Fusion Energy Sciences Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. Topics covered here are: vanadium alloys; silicon carbide composites; ferritic/martensitic steels; austenitic stainless steels; insulating ceramics and optical materials; solid breeding materials; radiation effects mechanistic studies and experimental methods; dosimetry damage parameters; activation calculations; materials engineering and design requirements; irradiation facilities; test matrices; and experimental methods

Technical Work Plan for: Near Field Environment: Engineered System: Radionuclide Transport Abstraction Model Report

Energy Technology Data Exchange (ETDEWEB)

J.D. Schreiber

2006-12-08

This technical work plan (TWP) describes work activities to be performed by the Near-Field Environment Team. The objective of the work scope covered by this TWP is to generate Revision 03 of EBS Radionuclide Transport Abstraction, referred to herein as the radionuclide transport abstraction (RTA) report. The RTA report is being revised primarily to address condition reports (CRs), to address issues identified by the Independent Validation Review Team (IVRT), to address the potential impact of transport, aging, and disposal (TAD) canister design on transport models, and to ensure integration with other models that are closely associated with the RTA report and being developed or revised in other analysis/model reports in response to IVRT comments. The RTA report will be developed in accordance with the most current version of LP-SIII.10Q-BSC and will reflect current administrative procedures (LP-3.15Q-BSC, ''Managing Technical Product Inputs''; LP-SIII.2Q-BSC, ''Qualification of Unqualified Data''; etc.), and will develop related Document Input Reference System (DIRS) reports and data qualifications as applicable in accordance with prevailing procedures. The RTA report consists of three models: the engineered barrier system (EBS) flow model, the EBS transport model, and the EBS-unsaturated zone (UZ) interface model. The flux-splitting submodel in the EBS flow model will change, so the EBS flow model will be validated again. The EBS transport model and validation of the model will be substantially revised in Revision 03 of the RTA report, which is the main subject of this TWP. The EBS-UZ interface model may be changed in Revision 03 of the RTA report due to changes in the conceptualization of the UZ transport abstraction model (a particle tracker transport model based on the discrete fracture transfer function will be used instead of the dual-continuum transport model previously used). Validation of the EBS-UZ interface model

Progress report of Technical Physics Division: April 1980 - March 1982

International Nuclear Information System (INIS)

Chaudhry, Ramesh; Vijendran, P.

1983-01-01

Activities, with an individual summary of each, of the Technical Physics Division (TPD) of the Bhabha Atomic Research Centre (BARC), Bombay are reported for the period April 1980 - March 1982. The major thrust of the TPD's work has been in: (i) design and fabrication of instruments, devices and equipment and (ii) development of techniques in the frontline research and technology areas like vacuum science, surface analysis, cryogenics and crystal growing. The Division also provided custombuilt electronics equipment, vacuum systems and glass components and devices to the various Divisions of BARC and other units of the DAE. Training and manpower development activities and technology transfer activities are also reported. Lists of seminars, colloquia, publications during the period of the report are given. (M.G.B.)

Technical minutes of the ninth INDC meeting. Vienna, 16-20 May 1977

International Nuclear Information System (INIS)

Motz, H.

1978-05-01

Progress reports from data centres on data measurements, facilities and evaluations, on coordinating activities are presented along with reports of technical, ad-hoc and policy subcommittees, on plans for cooperation and past meetings

Technical database and management system (DBMS) for the UMTRA project processing sites

International Nuclear Information System (INIS)

Hillman, R.L.; Mohr, D.E.

1985-01-01

The technical DBMS is a structured and organized method for collecting, storing, retrieving, and analyzing technical data based upon standard operating procedures and quality control measures. The automated environment created by this design exists both as a repository for processing site technical data and the analysis techniques used against this data for site characterization, evaluation, and design. The system is composed of diverse technical subjects that are collectively used to address remedial action problems associated with mill tailings disposal. These technical subjects include hydrology, geology, geochemistry, radiology, and engineering

University of Florida, University research program in robotics. Annual technical progress report

International Nuclear Information System (INIS)

Crane, C.D. III; Tulenko, J.S.

1994-05-01

Progress is reported in the areas of environmental hardening, database, world modeling, vision, man-machine interface, advanced liquid metal reactor inspection robot, and articulated transporter/manipulator system (ATMS) development

University of Florida, University research program in robotics. Annual technical progress report

Energy Technology Data Exchange (ETDEWEB)

Crane, C.D. III; Tulenko, J.S.

1994-05-01

Progress is reported in the areas of environmental hardening, database, world modeling, vision, man-machine interface, advanced liquid metal reactor inspection robot, and articulated transporter/manipulator system (ATMS) development.

Hazardous materials in aquatic environments of the Mississippi River Basin Project management. Technical quarterly progress report, April 1, 1996--June 30, 1996

Energy Technology Data Exchange (ETDEWEB)

McLachlan, J.; Ide, C.F.; O`Connor, S.

1996-08-01

This quarterly report summarizes accomplishments for the Project examining hazardous materials in aquatic environments of the Mississippi River Basin. Among the many research areas summarized are the following: assessment of mechanisms of metal-induced reproductive toxicity in aquatic species as a biomarker of exposure; hazardous wastes in aquatic environment;ecological sentinels of aquatic contamination in the lower Mississippi River System; remediation of selected contaminants; rapid on-site immunassay for heavy metal contamination; molecular mechanisms of developmental toxicity induced by retinoids and retinoid-like molecules; resuseable synthetic membranes for the removal of aromatic and halogenated organic pollutants from waste water; Effects of steroid receptor activation in neurendocrine cell of the mammalian hypothalamus; modeling and assessment of environmental quality of louisiana bayous and swamps; enhancement of environmental education. The report also contains a summary of publications resulting from this project and an appendix with analytical core protocals and target compounds and metals.

Nulcear Safety: Technical progress review, October--December 1988

Energy Technology Data Exchange (ETDEWEB)

Silver, E G [ed.

1988-01-01

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

Influence of admission marks on the academic performance of technical architecture students

OpenAIRE

Gaspar Fàbregas, Kàtia; Núñez Andrés, María Amparo; Rodríguez Jordana, Juan; Jordana Riba, Francisco de Paula

2016-01-01

Traditionally, students from higher training cycle and upper secondary school education access higher technical education with a wide range of access marks in each group. The purpose of this article is to analyse how students’ backgrounds and access marks really influence their success in the first academic year and further evolution to obtain the degree of Technical Architecture. To achieve this aim, the progress of students from different backgrounds was analysed for three acade...

Progress Report for Period Ending December 1961. Department of Reactor Physics

Energy Technology Data Exchange (ETDEWEB)

Tell, B [ed.

1962-08-15

This is the second Progress Report from the Department for Reactor Physics of Aktiebolaget Atomenergi, which is issued for the information of institutions and persons interested in the progress of the work. In this report the activities of the General Physics Section have been included, since this section nowadays belongs to the department. This is merely an informal progress report, and the results and data presented must be taken as preliminary. Final results will be submitted for publication either in the regular technical journals or as monographs in the series AE-reports.

Crystalline Repository Project. Technical progress report, October 1982-March 1983

International Nuclear Information System (INIS)

1985-01-01

This document reports the progress being made periodically on the development of a geologic repository in crystalline rock for the permanent disposal of high-level nuclear waste. The reporting elements are arranged by the work breakdown structure so that related studies are presented together. The studies are reported by the Office of Crystalline Respository Development (OCRD), a prime contractor of the US Department of Energy Repository Project Office. The studies include work by other prime contractors and by subcontractors to OCRD

Towards a space-borne quantum gravity gradiometer: progress in laboratory demonstration

Science.gov (United States)

Yu, Nan; Kohel, James M.; Kellogg, James R.; Maleki, Lute

2005-01-01

This paper describes the working principles and technical benefits of atom-wave interferometer-based inertial sensors, and gives a progress report on the development of a quantum gravity gradiometer for space applications at JPL.

Association Euratom - Risø National Laboratory, Technical University of Denmark - Annual Progress Report 2007

DEFF Research Database (Denmark)

Michelsen, Poul; Korsholm, Søren Bang; Juul Rasmussen, Jens

The programme of the Research Unit of the Fusion Association Euratom - Risø National Laboratory, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the pla......The programme of the Research Unit of the Fusion Association Euratom - Risø National Laboratory, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction...... phased out during 2007. Minor activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2007....

Transportation Technical Environmental Information Center index

Energy Technology Data Exchange (ETDEWEB)

Davidson, C. A.; Foley, J. T.

1980-10-01

In an effort to determine the environmental intensities to which energy materials in transit may be exposed, a Data Center of technical environmental information has been established by Sandia National Laboratories, Division 5523, for the DOE Office of Transportation Fuel Storage. This document is an index which can be used to request data of interest. Access to the information held is not limited to Sandia personnel. The purpose of the Transportation Technical Environmental Information Center is to collect, analyze, store, and make available descriptions of the environment of transportation expressed in engineering terms. The data stored in the Center are expected to be useful in a variety of transportation related analyses. Formulations of environmental criteria for shipment of cargo, risk assessments, and detailed structural analyses of shipping containers are examples where these data have been applied. For purposes of indexing and data retrieval, the data are catalogued under two major headings: Normal and Abnormal Environments.

Transportation Technical Environmental Information Center index

International Nuclear Information System (INIS)

Davidson, C.A.; Foley, J.T.

1980-10-01

In an effort to determine the environmental intensities to which energy materials in transit may be exposed, a Data Center of technical environmental information has been established by Sandia National Laboratories, Division 5523, for the DOE Office of Transportation Fuel Storage. This document is an index which can be used to request data of interest. Access to the information held is not limited to Sandia personnel. The purpose of the Transportation Technical Environmental Information Center is to collect, analyze, store, and make available descriptions of the environment of transportation expressed in engineering terms. The data stored in the Center are expected to be useful in a variety of transportation related analyses. Formulations of environmental criteria for shipment of cargo, risk assessments, and detailed structural analyses of shipping containers are examples where these data have been applied. For purposes of indexing and data retrieval, the data are catalogued under two major headings: Normal and Abnormal Environments

Heterogeneous Embedded Real-Time Systems Environment

Science.gov (United States)

2003-12-01

AFRL-IF-RS-TR-2003-290 Final Technical Report December 2003 HETEROGENEOUS EMBEDDED REAL - TIME SYSTEMS ENVIRONMENT Integrated...HETEROGENEOUS EMBEDDED REAL - TIME SYSTEMS ENVIRONMENT 6. AUTHOR(S) Cosmo Castellano and James Graham 5. FUNDING NUMBERS C - F30602-97-C-0259

Particle beam fusion progress report, January-June 1980

International Nuclear Information System (INIS)

1981-05-01

An overview and technical summaries are given for research progress in each of the following general areas: (1) fusion target studies; (2) target experiments; (3) particle beam source theory; (4) diagnostics development; (5) particle beam experiments; (6) pulsed power research and development; (7) pulse power application; and (8) Electron Beam Fusion Accelerator project

Theoretical particle physics. Technical progress report, May 1, 1985-April 30, 1986

International Nuclear Information System (INIS)

Gottlieb, S.A.; Hendry, A.W.; Kostelecky, V.A.; Lichtenberg, D.B.

1986-05-01

Research activities during this past year included theoretical work in lattice gauge theory, EMC effect, supersymmetry and supergravity, weak interactions including CP violation, and superstrings. Progress in all these areas is reported

Technical Cooperation Report for 2014. Report by the Director General

International Nuclear Information System (INIS)

2015-06-01

enhancements to the Project Progress Assessment Report. Part B of this document presents a summary of financial and non-financial programme delivery indicators. It reviews the resources mobilized for the TC programme through the Technical Cooperation Fund (TCF), and through extrabudgetary and in-kind contributions. Payments to the TCF in 2014 totalled €62.0 million (not including National Participation Costs, assessed programme costs or miscellaneous income), or 89.5% of the TCF target set for the year. New extrabudgetary resources for 2014 came to €18.6 million and in-kind contributions were €0.6 million. Overall, implementation for the TCF reached 78% in 2014. Part C of this document responds to the operative paragraphs of resolution GC(58)/RES/12, and covers assistance to Member States in the peaceful, safe, secure and regulated application of atomic energy and nuclear techniques in specific fields. It highlights regional activities and achievements in technical cooperation in 2014. Globally, health and nutrition accounted for the highest proportion of actuals 1 through the TC programme in 2014, followed by safety and security, and then by food and agriculture. Project examples are presented in Annex 1 according to thematic area, covering health and nutrition, food and agriculture, water and the environment, industrial applications, energy planning and nuclear power, radiation protection, nuclear safety and nuclear security, and nuclear knowledge development and management. The activities of the Programme of Action for Cancer Therapy are covered in Annex 2

NAEP 1999 Long-Term Trend Technical Analysis Report: Three Decades of Student Performance. NCES 2005-484

Science.gov (United States)

Allen, Nancy L.; McClellan, Catherine A.; Stoeckel, Joan J.

2005-01-01

This report provides an update to the technical analysis procedures documenting the 1996 National Assessment of Educational Progress (NAEP) as presented in "The NAEP 1996 Technical Report" (Allen, Carlson, and Zelenak, 1999). It describes how the 1999 long-term trend data were incorporated into the trend analyses. Since no national main…

Progress Evaluation for the Restaurant Industry Assessed by a Voluntary Marketing-Mix and Choice-Architecture Framework That Offers Strategies to Nudge American Customers toward Healthy Food Environments, 2006-2017.

Science.gov (United States)

Kraak, Vivica; Englund, Tessa; Misyak, Sarah; Serrano, Elena

2017-07-12

Consumption of restaurant food and beverage products high in fat, sugar and sodium contribute to obesity and non-communicable diseases. We evaluated restaurant-sector progress to promote healthy food environments for Americans. We conducted a desk review of seven electronic databases (January 2006-January 2017) to examine restaurant strategies used to promote healthful options in the United States (U.S.). Evidence selection ( n = 84) was guided by the LEAD principles (i.e., locate, evaluate, and assemble evidence to inform decisions) and verified by data and investigator triangulation. A marketing-mix and choice-architecture framework was used to examine eight voluntary strategies (i.e., place, profile, portion, pricing, promotion, healthy default picks, priming or prompting and proximity) to evaluate progress (i.e., no, limited, some or extensive) toward 12 performance metrics based on available published evidence. The U.S. restaurant sector has made limited progress to use pricing, profile (reformulation), healthy default picks (choices), promotion (responsible marketing) and priming and prompting (information and labeling); and some progress to reduce portions. No evidence was available to assess progress for place (ambience) and proximity (positioning) to promote healthy choices during the 10-year review period. Chain and non-chain restaurants can apply comprehensive marketing-mix and nudge strategies to promote healthy food environments for customers.

Innovative and practical technical development of nuclear energy. Efforts on proposal and recruitment type technical development of nuclear energy

International Nuclear Information System (INIS)

Matsui, Kazuaki; Shioiri, Akio; Hamada, Jun; Kanagawa, Takashi; Mori, Yukihide; Kouno, Koji

2003-01-01

In technical development of nuclear energy conceiving a view on energy environment problem at the 21st Century, technical development on innovative nuclear energy system as well as next generation LWR is an important subject. Even in Japan, on the 'Long-term program for research, development and utilization of nuclear energy (LPRNE)' summarized by the Atomic Energy Commission, investigation on R and Ds of innovative reactors under cooperation of government, industrial field, and universities is required. In the Energy Generalized Engineering Institute, by receiving a subsidy from the Ministry of Economy and Industry since 2000, a proposal recruitment business on innovative and practical technical development of nuclear energy has been carried out. Here were introduced hopeful and unique five themes out of them applied to the recruitment, such as a super-critical pressure water cooling reactor (SCPR), an integrated modular LWR (IMR): technical development for practice, technical development on general purpose boiling transitional analysis method, technical development on direct extraction of U and Pu from consumed fuels based on super-DIREX reprocessing method, and material transfer forecasting in natural barriers at landfill disposal of radioactive wastes. (G.K.)

Assuring PSA technical adequacy for new advanced light water reactor designs

International Nuclear Information System (INIS)

Lutz, R.J.; Detar, H.L.; Schneider, R.E.

2012-01-01

The Probabilistic Safety Assessment (PSA) for an Advanced Light Water Reactor (ALWR) must exhibit a high level of technical adequacy, or technical quality, in order to be used as a reliable tool for making risk informed decisions concerning design and eventual operation of the plant. During the design phase, decisions on some design features may use the PSA as an input. Also, the PSA may be used as input to other operational decisions during plant design and construction including the development of procedures, development of technical specification limiting conditions for operation and scheduling of preventive maintenance activities. For the existing fleet of light water reactors (LWRs), PSA technical adequacy can be judged from wide ranging acceptance criteria such as the PRA (Probabilistic Risk Assessment) Standard in the United States of America that was developed jointly by the American Society of Mechanical Engineers (ASME) and the American Nuclear Society (ANS). However, the requirements for PRA technical adequacy in this PRA Standard assumes that the plant is built and has operation experience. Some of the requirements cannot be met for ALWRs in the design or construction phase and with no operational history. Key elements of a high level of technical adequacy include procedures, operator interviews, plant walk-downs and equipment reliability histories. The ability to include these key elements into the ALWR PSA to improve technical adequacy will progress as the ALWR progresses from the design stage through the construction stage and finally to the fuel load / pre-operational stage. As the technical adequacy becomes more robust, more confidence can be placed on risk-informed decisions that are made with the PSA. To assist in using the PSA as input to design and operational decisions in the design and construction stages of an ALWR, an addition to the ASME/ANS PRA Standard is being developed. The intent of this addition to the Standard is to provide

Pillars of peace: The evolution of nuclear technical cooperation

International Nuclear Information System (INIS)

Cetto, A.M.

2003-01-01

The twentieth century witnessed unprecedented scientific and technological progress, unfortunately paralleled by the development of weapons of mass destruction. And with this progress came an incredible amount of responsibility for scientists and governments. The creation of the IAEA and its technical cooperation programme brought together scientists and governments to use nuclear technology for the 'peaceful pursuits of mankind'. The programme supports application of nuclear techniques to solve socio-economic and human development problems in areas as diverse as agriculture, health, natural resource management, and radiation protection. Fifty years after President Eisenhower's famous 'Atoms for Peace' speech, the IAEA technical cooperation programme provides more than $70 million worth of experts, training, and procurement services each year to approximately 75% of its 137 Member States. But as development budgets shrink, the programme is seeking to make more meaningful use of resources at hand (national capacities, regional resources, development partners and the voluntary Technical Cooperation Fund), targeting specific problems of Member States and partnering with other sustainable development organizations. At the same time, efforts continue to overcome the past legacy that necessitated the 'Atoms for Peace' proposal in the first place. Even as development challenges are addressed, the IAEA, its partners and governments face other challenges along the way, including public opinion for a technology that had a devastating global introduction

Tulane/Xavier University Hazardous Materials in Aquatic Environments of the Mississippi River Basin. Quarterly progress report, January 1, 1995--March 31, 1995

International Nuclear Information System (INIS)

1995-01-01

This progress report covers activities for the period January 1 - March 31, 1995 on project concerning 'Hazardous Materials in Aquatic Environments of the Mississippi River Basin.' The following activities are each summarized by bullets denoting significant experiments/findings: biotic and abiotic studies on the biological fate, transport and ecotoxicity of toxic and hazardous waste in the Mississippi River Basin; assessment of mechanisms of metal-induced reproductive toxicity in quatic species as a biomarker of exposure; hazardous wastes in aquatic environments: biological uptake and metabolism studies; ecological sentinels of aquatic contamination in the lower Mississippi River system; bioremediation of selected contaminants in aquatic environments of the Mississippi River Basin; a sensitive rapid on-sit immunoassay for heavy metal contamination; pore-level flow, transport, agglomeration and reaction kinetics of microorganism; biomarkers of exposure and ecotoxicity in the Mississippi River Basin; natural and active chemical remediation of toxic metals, organics and radionuclides in the aquatic environment; expert geographical information systems for assessing hazardous wastes in aquatic environments; enhancement of environmental education; and a number of just initiated projects including fate and transport of contaminants in aquatic environments; photocatalytic remediation; radionuclide fate and modeling from Chernobyl

Technical development of industry for 30 years

International Nuclear Information System (INIS)

2009-01-01

This book mentions the history for 30 years since 1979 on industrial technology, which records change of system and environment of industrial technology development, like economical and social environment, industrial technology policy, support system on technical development and enterprise institute, assignment for future and product of industrial technology by field such as electric electronic, information and communications, machine material and fiber chemistry, and the way which Korea industrial technology association walked on.

WWW-based environments for collaborative group work

NARCIS (Netherlands)

Collis, Betty

1998-01-01

Since 1994, we have been involved in the design and use of a series of WWW-based environments to support collaborative group work for students in a technical university in The Netherlands. These environments, and the course re-design that accompanies each new environment, began in April 1994 and

[Shippingport Station Decommissioning Project]: FY 1987 annual progress report, October 1, 1986-September 30, 1987

International Nuclear Information System (INIS)

1988-01-01

This report presents progress on the Shippingport Station Decommissioning Project for FY 1987. There are two main topics: Project Management and Decommissioning Project Activities. Changes from technical and managerial concepts developed in the original Decommissioning Plan are presented with the related technical, economic, or schedule considerations. 3 refs., 9 figs., 4 tabs

Shippingport Station Decommissioning Project: FY 1988 annual progress report, October 1, 1987--September 30, 1988

International Nuclear Information System (INIS)

1989-01-01

This report presents progress on the Shippingport Station Decommissioning Project for FY 1988. There are two main topics: Project Management and Decommissioning Project Activities. Changes from technical and managerial concepts developed in the original Decommissioning Plan are presented with the related technical, economic, or schedular considerations. 4 refs., 17 figs., 2 tabs

Annual progress report 1981

International Nuclear Information System (INIS)

1982-01-01

This annual progress report of the CEA Protection and Nuclear Safety Institut outlines a brief description of the progress made in each section of the Institut. Research activities of the Protection department include, radiation effects on man, radioecology and environment radioprotection techniques. Research activities of the Nuclear Safety department include, reactor safety analysis, fuel cycle facilities safety analysis, safety research programs. The third section deals with nuclear material security including security of facilities, security of nuclear material transport and monitoring of nuclear material management [fr

Hydrogen storage - are we making progress?

International Nuclear Information System (INIS)

Blair, L.; Milliken, J.; Satyapal, S.

2004-01-01

'Full text:' The efficient storage of hydrogen in compact, lightweight systems that allow greater than 300-mile range has been identified as one of the major technical challenges facing the practical commercialization of fuel cell power systems for light-duty vehicles. Following the hydrogen vision announced by President Bush in his 2003 State of the Union address, the U.S. Department of Energy issued a Grand Challenge, soliciting ideas from universities, national laboratories, and industry. DOE's National Hydrogen Storage Project, an aggressive and innovative research program focused on materials R and D, will be launched in Fiscal Year 2005. An intensive effort is also underway in the private sector, both in the U.S. and abroad, to meet the challenging on-board hydrogen storage requirements. A historical perspective of hydrogen storage research and development will be provided and the current DOE technical targets for hydrogen storage systems will be discussed. The state-of-the-art in hydrogen storage will be summarized and recent progress assessed. Finally future research directions and areas of technical emphasis will be described. (author)

ITER technology R and D progress report. Report by the Director. ITER technical advisory committee meeting, 25-27 June 2000, St. Petersburg

International Nuclear Information System (INIS)

2001-01-01

The overall philosophy for the ITER design has been to use established approaches through detailed analysis and to validate their application to ITER through technology R and D, including fabrication of full scale or scalable models of key components. All this R and D work has been done for ITER under collaboration among the Home Teams, with a total resource of about 660 KIUA. R and D issues for ITER-FEAT are almost the same as for the 1998 ITER design. Major developments and fabrication have been completed and tests have significantly progressed. The technical output from the R and D validates the technologies and confirms the manufacturing techniques and quality assurance incorporated in the ITER design, and supports the manufacturing cost estimates for important key cost drivers. The testing of models is continuing to demonstrate their performance margin and/or to optimize their operational use. Their realisation offers insights useful for a possible future collaborative construction activity. Valuable and relevant experience has already been gained in the management of industrial scale, cross-party ventures. The successful progress of these projects increases confidence in the possibility of jointly constructing ITER in an international project framework. The R and D present status is summarized in the following: details are given in Chapters 2 and 3. Significant efforts and resources have been devoted to the Seven Large R and D Projects which cover all the major key components of the basic machine of ITER and their maintenance tools

Analysis of Aviation Safety Reporting System Incident Data Associated with the Technical Challenges of the Atmospheric Environment Safety Technology Project

Science.gov (United States)

Withrow, Colleen A.; Reveley, Mary S.

2014-01-01

This study analyzed aircraft incidents in the NASA Aviation Safety Reporting System (ASRS) that apply to two of the three technical challenges (TCs) in NASA's Aviation Safety Program's Atmospheric Environment Safety Technology Project. The aircraft incidents are related to airframe icing and atmospheric hazards TCs. The study reviewed incidents that listed their primary problem as weather or environment-nonweather between 1994 and 2011 for aircraft defined by Federal Aviation Regulations (FAR) Parts 121, 135, and 91. The study investigated the phases of flight, a variety of anomalies, flight conditions, and incidents by FAR part, along with other categories. The first part of the analysis focused on airframe-icing-related incidents and found 275 incidents out of 3526 weather-related incidents over the 18-yr period. The second portion of the study focused on atmospheric hazards and found 4647 incidents over the same time period. Atmospheric hazards-related incidents included a range of conditions from clear air turbulence and wake vortex, to controlled flight toward terrain, ground encounters, and incursions.

The monitoring of radioactive contamination and radiation exposure in the environment in Germany- tasks, techniques, realizations

International Nuclear Information System (INIS)

Bayer, A.

1998-01-01

A brief historical account of the development of the monitoring of radioactivity in the environment in Germany is given. The aims of monitoring and the tasks, classified according to the possible sources of release, are presented and the methods required are described. The monitoring systems, set up on the basis of different legal principles, are presented and the technical realization of these including their current state of development, is described. Finally, an account is given of the coordination of the national monitoring systems which is at present in progress, as well as of the integration of these monitoring systems into international monitoring and information networks. (author)

Occupational health and environment research 1983: Health, Safety, and Environment Division. Progress report

International Nuclear Information System (INIS)

Voelz, G.L.

1985-05-01

The primary responsibility of the Health, Safety, and Environment (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environmental protection. These activities are designed to protect the workers, the public, and the environment. Evaluation of respiratory protective equipment included the XM-30 and M17A1 military masks, use of MAG-1 spectacles in respirators, and eight self-contained units. The latter units were used in an evaluation of test procedures used for Bureau of Mines approval of breathing apparatuses. Analyses of air samples from field studies of a modified in situ oil shale retorting facility were performed for total cyclohexane extractables and selected polynuclear aromatic hydrocarbons. Aerosols generation and characterization of effluents from oil shale processing were continued as part of an inhalation toxicology study. Additional data on plutonium excretion in urine are presented and point up problems in using the Langham equation to predict plutonium deposition in the body from long-term excretion data. Environmental surveillance at Los Alamos during 1983 showed the highest estimated radiation dose from Laboratory operations to be about 26% of the natural background radiation dose. Several studies on radionuclides and their transport in the Los Alamos environment are described. The chemical quality of surface and ground water near the geothermal hot dry rock facility is described. Short- and long-term consequences to man from releases of radionuclides into the environment can be simulated by the BIOTRAN computer model, which is discussed brirfly

Technical Cooperation Report for 2014. Report by the Director General [Spanish Version

International Nuclear Information System (INIS)

2015-06-01

enhancements to the Project Progress Assessment Report. Part B of this document presents a summary of financial and non-financial programme delivery indicators. It reviews the resources mobilized for the TC programme through the Technical Cooperation Fund (TCF), and through extrabudgetary and in-kind contributions. Payments to the TCF in 2014 totalled €62.0 million (not including National Participation Costs, assessed programme costs or miscellaneous income), or 89.5% of the TCF target set for the year. New extrabudgetary resources for 2014 came to €18.6 million and in-kind contributions were €0.6 million. Overall, implementation for the TCF reached 78% in 2014. Part C of this document responds to the operative paragraphs of resolution GC(58)/RES/12, and covers assistance to Member States in the peaceful, safe, secure and regulated application of atomic energy and nuclear techniques in specific fields. It highlights regional activities and achievements in technical cooperation in 2014. Globally, health and nutrition accounted for the highest proportion of actuals through the TC programme in 2014, followed by safety and security, and then by food and agriculture. Project examples are presented in Annex 1 according to thematic area, covering health and nutrition, food and agriculture, water and the environment, industrial applications, energy planning and nuclear power, radiation protection, nuclear safety and nuclear security, and nuclear knowledge development and management. The activities of the Programme of Action for Cancer Therapy are covered in Annex 2

Aircraft Nuclear Propulsion Project Quarterly Progress Report for Period Ending December 31, 1956

Energy Technology Data Exchange (ETDEWEB)

NA, NA [ORNL

1957-03-12

This quarterly progress report of the Aircraft Nuclear Propulsion Project at ORNL records the technical progress of research on circulating-fuel reactors and other ANP research at the Laboratory. The report is divided into five major parts: 1) Aircraft Reactor Engineering, 2) Chemistry, and 3) Metallurgy, 4) Heat Transfer and Physical Properties, Radiation Damage, and Fuel Recovery and Reprocessing, and 5) Reactor Shielding.

Symbol manipulation by computer applied to plasma physics. Technical progress report 2

International Nuclear Information System (INIS)

Rosen, B.

1977-09-01

Progress has been made in automating the calculation of parametric processes analytically by computer. The computations are performed automatically to lowest order quickly and efficiently. Work has started on a method for solving the nonlinear differential equations describing interacting modes

Experimental studies of elementary particle interactions at high energies: Technical progress report

International Nuclear Information System (INIS)

1987-01-01

This paper discusses progress of experiments at CERN and Fermilab. At CERN, data accumulation and analysis is discussed for the UA-6 experiment, which involves proton-antiproton collisions. At Fermilab, the testing of a collider detector for the Tevatron is discussed

Progress Evaluation for the Restaurant Industry Assessed by a Voluntary Marketing-Mix and Choice-Architecture Framework That Offers Strategies to Nudge American Customers toward Healthy Food Environments, 2006–2017

Science.gov (United States)

Misyak, Sarah; Serrano, Elena

2017-01-01

Consumption of restaurant food and beverage products high in fat, sugar and sodium contribute to obesity and non-communicable diseases. We evaluated restaurant-sector progress to promote healthy food environments for Americans. We conducted a desk review of seven electronic databases (January 2006–January 2017) to examine restaurant strategies used to promote healthful options in the United States (U.S.). Evidence selection (n = 84) was guided by the LEAD principles (i.e., locate, evaluate, and assemble evidence to inform decisions) and verified by data and investigator triangulation. A marketing-mix and choice-architecture framework was used to examine eight voluntary strategies (i.e., place, profile, portion, pricing, promotion, healthy default picks, priming or prompting and proximity) to evaluate progress (i.e., no, limited, some or extensive) toward 12 performance metrics based on available published evidence. The U.S. restaurant sector has made limited progress to use pricing, profile (reformulation), healthy default picks (choices), promotion (responsible marketing) and priming and prompting (information and labeling); and some progress to reduce portions. No evidence was available to assess progress for place (ambience) and proximity (positioning) to promote healthy choices during the 10-year review period. Chain and non-chain restaurants can apply comprehensive marketing-mix and nudge strategies to promote healthy food environments for customers. PMID:28704965

Reactor safety. Annual technical progress report, Government fiscal year 1979

International Nuclear Information System (INIS)

1980-01-01

Information is presented on LMFBR reactor safety concerning the energetics effects of sodium spray fires; sodium drop and spray burning; core debris accommodation; attenuation in containment; and attenuation in the environment

Microwave plasma source for neutral-beam injection systems. Quarterly technical progress report

International Nuclear Information System (INIS)

1981-01-01

The overall program is described and the technical and programmatic reasons for the decision to pursue both the RFI and ECH sources into the current hydrogen test stage is discussed. We consider the general characteristics of plasma sources in the parameter regime of interest for neutral beam applications. The operatonal characteristics, advantages and potential problems of RFI and ECH sources are discussed. In these latter two sections we rely heavily on experience derived from developing RFI and ECH ion engine sources for NASA

Maryland University sectored isochronous cyclotron (MUSIC): Progress report No. 11

Energy Technology Data Exchange (ETDEWEB)

1966-10-10

Technical progress during the past quarter has contributed to increased confidence that MUSIC will exceed its desired performance characteristics in all respects. Design studies on the magnet indicate that a field has been obtained capable of accelerating protons above the 112 MeV design objective. Initial rf study and design work indicates no major technical problems, although there are many difficult engineering problems to be solved. Center studies are just being started. Building installation and interface problems are being dealt with effectively, and no significant problems are anticipated in this area.

Technical Safety Appraisal of the Rocky Flats Plant

Energy Technology Data Exchange (ETDEWEB)

Brown, Blake P.

1989-01-01

This report provides the results of a Technical Safety Appraisal (TSA) of the Rocky Flats Plant (RFP) conducted November 14 to 18 and November 28 to December 9, 1988. This appraisal covered the effectiveness and improvements in the RFP safety program across the site, evaluating progress to date against standards of accepted practice. The appraisal included coverage of the timeliness and effectiveness of actions taken in response to the recommendations/concerns in three previous Technical Safety Appraisals (TSAs) of RFP Bldg. 707 conducted in July 1986, Bldgs. 771/774 conducted in October/November 1986, and Bldgs. 776/777 conducted in January/February 1988. Results of this appraisal are given in Section IV for each of 14 technical safety areas at RFP. These results include a discussion, conclusions and any new safety concerns for each technical safety area. Appendix A contains a description of the system for categorizing concerns, and the concerns are tabulated in Appendix B. Appendix C reports on the evaluation of the contractor's actions and the current status of each of the 230 recommendations and concerns contained in the three previous TSA reports.

Fatigue management considering LWR coolant environments

International Nuclear Information System (INIS)

Park, Heung Bae; Jin, Tae eun

2000-01-01

Design fatigue curve for structural material in the ASME Boiler and Pressure Vessel Code do not explicitly address the effects of reactor coolant environments on fatigue life. Environmentally assisted cracking (EAC) of low-alloy steels in light water reactor (LWR) coolant environments has been a concern ever since the early 1970's. And, recent fatigue test data indicate a significant decrease in fatigue lives of carbon steels, low-alloy steels and austenitic stainless steels in LWR coolant environments. For these reasons, fatigue of major components has been identified as a technical issue remaining to be resolved for life management and license renewal of nuclear power plants. In the present paper, results of recent investigations by many organizations are reviewed to provide technical justification to support the development of utility approach regarding the management of fatigue considering LWR coolant environments for the purpose of life management and license renewal of nuclear power plants. (author)

Technical efficiency and productivity of Chinese county hospitals: an exploratory study in Henan province, China

Science.gov (United States)

Cheng, Zhaohui; Tao, Hongbing; Cai, Miao; Lin, Haifeng; Lin, Xiaojun; Shu, Qin; Zhang, Ru-ning

2015-01-01

Objectives Chinese county hospitals have been excessively enlarging their scale during the healthcare reform since 2009. The purpose of this paper is to examine the technical efficiency and productivity of county hospitals during the reform process, and to determine whether, and how, efficiency is affected by various factors. Setting and participants 114 sample county hospitals were selected from Henan province, China, from 2010 to 2012. Outcome measures Data envelopment analysis was employed to estimate the technical and scale efficiency of sample hospitals. The Malmquist index was used to calculate productivity changes over time. Tobit regression was used to regress against 4 environmental factors and 5 institutional factors that affected the technical efficiency. Results (1) 112 (98.2%), 112 (98.2%) and 104 (91.2%) of the 114 sample hospitals ran inefficiently in 2010, 2011 and 2012, with average technical efficiency of 0.697, 0.748 and 0.790, respectively. (2) On average, during 2010–2012, productivity of sample county hospitals increased by 7.8%, which was produced by the progress in technical efficiency changes and technological changes of 0.9% and 6.8%, respectively. (3) Tobit regression analysis indicated that government subsidy, hospital size with above 618 beds and average length of stay assumed a negative sign with technical efficiency; bed occupancy rate, ratio of beds to nurses and ratio of nurses to physicians assumed a positive sign with technical efficiency. Conclusions There was considerable space for technical efficiency improvement in Henan county hospitals. During 2010–2012, sample hospitals experienced productivity progress; however, the adverse change in pure technical efficiency should be emphasised. Moreover, according to the Tobit results, policy interventions that strictly supervise hospital bed scale, shorten the average length of stay and coordinate the proportion among physicians, nurses and beds, would benefit hospital efficiency

Health, Safety, and Environment Division: Annual progress report 1987

Energy Technology Data Exchange (ETDEWEB)

Rosenthal, M.A. (comp.)

1988-04-01

The primary responsibility of the Health, Safety, and Environment (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environment protection. These activities are designed to protect the worker, the public, and the environment. Many disciplines are required to meet the responsibilities, including radiation protection, industrial hygiene, safety, occupational medicine, environmental science, epidemiology, and waste management. New and challenging health and safety problems arise occasionally from the diverse research and development work of the Laboratory. Research programs in HSE Division often stem from these applied needs. These programs continue but are also extended, as needed to study specific problems for the Department of Energy and to help develop better occupational health and safety practices.

Health, Safety, and Environment Division: Annual progress report 1987

International Nuclear Information System (INIS)

Rosenthal, M.A.

1988-04-01

The primary responsibility of the Health, Safety, and Environment (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environment protection. These activities are designed to protect the worker, the public, and the environment. Many disciplines are required to meet the responsibilities, including radiation protection, industrial hygiene, safety, occupational medicine, environmental science, epidemiology, and waste management. New and challenging health and safety problems arise occasionally from the diverse research and development work of the Laboratory. Research programs in HSE Division often stem from these applied needs. These programs continue but are also extended, as needed to study specific problems for the Department of Energy and to help develop better occupational health and safety practices

TECHNICAL TRAINING SEMINAR: High Temperature Superconductors: Progress and Issues

CERN Multimedia

Davide Vitè

2002-01-01

Monday 24 June from 14:30 to 15:30 - Training Centre Auditorium - bldg. 593-11 High Temperature Superconductors: Progress and Issues Prof. Jan Evetts / UNIVERSITY OF CAMBRIDGE, Department of Materials Science and Metallurgy, UK Grappling with grain boundaries: Current transport processes in granular High Temperature Superconductors (HTS) The development of High Temperature Superconductors, seen from a materials scientist's point of view, is relevant to the superconductivity community at CERN: their possible high current applications can include high performance magnets for future accelerators. There is an urgent need to develop a quantitative description of HTS conductors in terms of their complex anisotropy, inhomogeneity and dimensionality. This is essential both for the practical specification of a conductor and for charting routes to conductor optimisation. The critical current, the n-value, dissipation and quenching characteristics are amongst most important parameters that make up an engineering specifi...

Accelerator research studies. Technical progress report, July 1, 1985-June 30, 1986

International Nuclear Information System (INIS)

1986-01-01

Progress is reported in these areas: study of instabilities and emittance growth in periodic focusing systems for intense beams; study of collective ion acceleration by intense electron beams and pulse powered plasma focus; and study of microwave sources and parameter scaling for high-frequency linacs

Nuclear waste management. Semiannual progress report, October 1982-March 1983

International Nuclear Information System (INIS)

Chikalla, T.D.; Powell, J.A.

1983-06-01

This document is one of a series of technical progress reports designed to report radioactive waste management programs at the Pacific Northwest Laboratory. Accomplishments in the following programs are reported: waste stabilization; Materials Characterization Center; waste isolation; low-level waste management; remedial action; and supporting studies

Commercial LFCM vitrification technology. Quarterly progress report, October-December 1984

Energy Technology Data Exchange (ETDEWEB)

Burkholder, H.C.; Jarrett, J.H. (comps.)

1985-07-01

This report is the first in a series of quarterly reports compiled by the Nuclear Waste Treatment Program Office at Pacific Northwest Laboratory to document progress on commercial liquid-fed ceramic melter (LFCM) vitrification technology. Progress in the following technical subject areas during the first quarter of FY 1985 is discussed: pretreatment systems, melting process chemistry, glass development and characterization, feed preparation and transfer systems, melter systems, canister filling and handling systems, off-gas systems, process/product modeling and control, and supporting studies. 33 figs., 12 tabs.

Physicians’ Progress Notes

DEFF Research Database (Denmark)

Bansler, Jørgen; Havn, Erling C.; Mønsted, Troels

2013-01-01

in patient care, they have not dealt specifically with the role, structure, and content of the progress notes. As a consequence, CSCW research has not yet taken fully into account the fact that progress notes are coordinative artifacts of a rather special kind, an open-ended chain of prose texts, written...... sequentially by cooperating physicians for their own use as well as for that of their colleagues. We argue that progress notes are the core of the medical record, in that they marshal and summarize the overwhelming amount of data that is available in the modern hospital environment, and that their narrative...... format is uniquely adequate for the pivotal epistemic aspect of cooperative clinical work: the narrative format enables physicians to not only record ‘facts’ but also—by filtering, interpreting, organizing, and qualifying information—to make sense and act concertedly under conditions of uncertainty...

Technical Work Plan for: Near Field Environment: Engineered Barrier System: Radionuclide Transport Abstraction Model Report

International Nuclear Information System (INIS)

J.D. Schreiber

2006-01-01

This technical work plan (TWP) describes work activities to be performed by the Near-Field Environment Team. The objective of the work scope covered by this TWP is to generate Revision 03 of EBS Radionuclide Transport Abstraction, referred to herein as the radionuclide transport abstraction (RTA) report. The RTA report is being revised primarily to address condition reports (CRs), to address issues identified by the Independent Validation Review Team (IVRT), to address the potential impact of transport, aging, and disposal (TAD) canister design on transport models, and to ensure integration with other models that are closely associated with the RTA report and being developed or revised in other analysis/model reports in response to IVRT comments. The RTA report will be developed in accordance with the most current version of LP-SIII.10Q-BSC and will reflect current administrative procedures (LP-3.15Q-BSC, ''Managing Technical Product Inputs''; LP-SIII.2Q-BSC, ''Qualification of Unqualified Data''; etc.), and will develop related Document Input Reference System (DIRS) reports and data qualifications as applicable in accordance with prevailing procedures. The RTA report consists of three models: the engineered barrier system (EBS) flow model, the EBS transport model, and the EBS-unsaturated zone (UZ) interface model. The flux-splitting submodel in the EBS flow model will change, so the EBS flow model will be validated again. The EBS transport model and validation of the model will be substantially revised in Revision 03 of the RTA report, which is the main subject of this TWP. The EBS-UZ interface model may be changed in Revision 03 of the RTA report due to changes in the conceptualization of the UZ transport abstraction model (a particle tracker transport model based on the discrete fracture transfer function will be used instead of the dual-continuum transport model previously used). Validation of the EBS-UZ interface model will be revised to be consistent with

Shippingport Station Decommissioning Project: FY 1986 annual progress report, October 1, 1985 through September 30, 1986

International Nuclear Information System (INIS)

1987-01-01

This report presents progress on the Shippingport Station Decommissioning Project for FY 1986. There are two main topics: Project Management and Decommissioning Project Activities. Changes from technical and managerial concepts developed in the original Decommissioning Plan are presented with the related technical, economic, or schedule considerations. 9 refs., 4 figs., 3 tabs

Еcological security of environment in Zhytomyr region

Directory of Open Access Journals (Sweden)

I.М. Kovalevska

2016-03-01

Full Text Available The article is aiming at the study of environmental hazards in Zhytomir region. Its main objective is to identify the set of adverse factors affecting the state of danger and compose a necessary starting material for the prediction of possible negative consequences, their nature and extent. The matter of special importance for the study of the phenomenon of security is the security classification. First of all, the forms (system of security in relation to the forces and processes of natural, social and technical character should be distinguished. They can be defined as systems of geo-bio-physical, social and technical security. The classification of security can be determined in many ways, for example, in relation to the object of security; in relation to the subject of security; according to the problem indication; according to the functional indication. Security is a distinctive characteristic and prerequisite of life, progressive development and viability of real-world objects. The methodology of its evaluation is based on the states of the essence of natural and anthropogenic environmental pollution, the standard requirements for the quality of environmental objects and standards of acceptable contamination. The assessment of ecological security of the environment is the quantitative measure of parameters of environmental pollution dangers, threats and risks of natural character as well as the state of anthropogenic security. This assessment is carried out according to the methods and ways to measure environmental parameters. For this purpose it is important to know the factors of danger and the system of indicators that characterizes all natural and environmental phenomena and processes of geo-ecological dangers, natural environmental conditions, ecological condition. The system of natural and industrial environmental indicators consists of the indicators which characterize all phenomena and processes of geo-ecological dangers of natural

Standardization of green building technologies for environment design

Directory of Open Access Journals (Sweden)

Benuzh Andrey

2016-01-01

Full Text Available The article describes the structure and field of standardization ISO / TC 205 “Building environment design”, provides examples of green building technologies. The main purpose of the article is to show the interaction between international ISO / TC 205 “Building environment design” and created in Russia in 2016 the Technical Committee of Standardization № 366 “Green technology of the build environment and green innovative products”. Both of these technical committees promote green building technologies for environment design, thereby deal with the negative impact on the environment and the reasons of global warming. Instead of buildings that attempt to suppress and overcome nature, why not design buildings that integrate with the environment, on every possible level? The international standardization work which ISO/TC 205 “Building environment design” performs seeks, in addition to lowering trade barriers for engineering design, to promote and facilitate the design of high performance buildings: higher performing as economic assets for their owners, higher performing as buildings that provide amenable indoor environment for their occupants, and higher performing with respect to resource utilization and environmental impact.

Core Capabilities and Technical Enhancement -- FY-98 Annual Report

Energy Technology Data Exchange (ETDEWEB)

Miller, David Lynn

1999-04-01

The Core Capability and Technical Enhancement (CC&TE) Program, a part of the Verification, Validation, and Engineering Assessment Program, was implemented to enhance and augment the technical capabilities of the Idaho National Engineering and Environmental Laboratory (INEEL). The purpose for strengthening the technical capabilities of the INEEL is to provide the technical base to serve effectively as the Environmental Management Laboratory for the Office of Environmental Management (EM). An analysis of EM's science and technology needs as well as the technology investments currently being made by EM across the complex was used to formulate a portfolio of research activities designed to address EM's needs without overlapping work being done elsewhere. An additional purpose is to enhance and maintain the technical capabilities and research infrastructure at the INEEL. This is a progress report for fiscal year 1998 for the five CC&TE research investment areas: (a) transport aspects of selective mass transport agents, (b) chemistry of environmental surfaces, (c) materials dynamics, (d) characterization science, and (e) computational simulation of mechanical and chemical systems. In addition to the five purely technical research areas, this report deals with the science and technology foundations element of the CC&TE from the standpoint of program management and complex-wide issues. This report also provides details of ongoing and future work in all six areas.

Core capabilities and technical enhancement, FY-98 annual report

Energy Technology Data Exchange (ETDEWEB)

Miller, D.L.

1999-04-01

The Core Capability and Technical Enhancement (CCTE) Program, a part of the Verification, Validation, and Engineering Assessment Program, was implemented to enhance and augment the technical capabilities of the Idaho National Engineering and Environmental Laboratory (INEEL). The purpose for strengthening the technical capabilities of the INEEL is to provide the technical base to serve effectively as the Environmental Management Laboratory for the Department of Energy's Office of Environmental Management (EM). An analysis of EM's science and technology needs as well as the technology investments currently being made by EM across the complex was used to formulate a portfolio of research activities designed to address EM's needs without overlapping work being done elsewhere. An additional purpose is to enhance and maintain the technical capabilities and research infrastructure at the INEEL. This is a progress report for fiscal year 1998 for the five CCTE research investment areas: (a) transport aspects of selective mass transport agents, (b) chemistry of environmental surfaces, (c) materials dynamics, (d) characterization science, and (e) computational simulation of mechanical and chemical systems. In addition to the five purely technical research areas, this report deals with the science and technology foundations element of the CCTE from the standpoint of program management and complex-wide issues. This report also provides details of ongoing and future work in all six areas.

Norm-Aware Socio-Technical Systems

Science.gov (United States)

Savarimuthu, Bastin Tony Roy; Ghose, Aditya

The following sections are included: * Introduction * The Need for Norm-Aware Systems * Norms in human societies * Why should software systems be norm-aware? * Case Studies of Norm-Aware Socio-Technical Systems * Human-computer interactions * Virtual environments and multi-player online games * Extracting norms from big data and software repositories * Norms and Sustainability * Sustainability and green ICT * Norm awareness through software systems * Where To, From Here? * Conclusions

A Tool for Measuring NASA's Aeronautics Research Progress Toward Planned Strategic Community Outcomes

Science.gov (United States)

Tahmasebi, Farhad; Pearce, Robert

2016-01-01

Description of a tool for portfolio analysis of NASA's Aeronautics research progress toward planned community strategic Outcomes is presented. For efficiency and speed, the tool takes advantage of a function developed in Excels Visual Basic for Applications. The strategic planning process for determining the community Outcomes is also briefly discussed. Stakeholder buy-in, partnership performance, progress of supporting Technical Challenges, and enablement forecast are used as the criteria for evaluating progress toward Outcomes. A few illustrative examples of using the tool are also presented.

Technical know-how of site descriptive modeling for site characterization - 59089

International Nuclear Information System (INIS)

Saegusa, Hiromitsu; Onoe, Hironori; Doke, Ryosuke; Niizato, Tadafumi; Yasue, Ken-ichi

2012-01-01

The site descriptive model covering the current status of characteristics of geological environment and the site evolution model for estimation of the long-term evolution of site conditions are used to integrate multi-disciplinary investigation results. It is important to evaluate uncertainties in the models, to specify issues regarding the uncertainties and to prioritize the resolution of specified issues, for the planning of site characterization. There is a large quantity of technical know-how in the modeling process. It is important to record the technical know-how with transparency and traceability, since site characterization projects generally need long duration. The transfer of the technical know-how accumulated in the research and development (R and D) phase to the implementation phase is equally important. The aim of this study is to support the planning of initial surface-based site characterizations based on the technical know-how accumulated from the underground research laboratory projects. These projects are broad scientific studies of the deep geological environment and provide a technical basis for the geological disposal of high-level radioactive wastes. In this study, a comprehensive task flow from acquisition of existing data to planning of field investigations through the modeling has been specified. Specific task flow and decision-making process to perform the tasks have been specified. (authors)

Reader-Centered Technical Writing

Science.gov (United States)

Narayanan, M.

2012-12-01

Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into

The technical bases for government emergency plans

International Nuclear Information System (INIS)

Champion, D.; Herviou, K.

2006-01-01

Despite technical and organisational existing arrangements to prevent human and equipment failures, the occurrence of a severe accident inducing an important release of radioactive or toxic products could not be totally excluded. Public authorities are responsible for the development of emergency plans which main objective is the protection of the population in case of accident. The efficiency of emergency plans assumes they have been established before the occurrence of any accident, taking into account specificities of the installation and its environment. On the basis of the list of possible events likely to induce releases into the environment, some 'envelope' scenarios are selected and their consequences are assessed- The comparison of the consequences to reference levels for which protective actions are recommended gives the area where actions may be required. This approach is applied for the different nuclear facilities in France. Examples are given in the article on the definition of emergency plans technical basis for nuclear power plants, other nuclear facilities and transportation of radioactive materials. (authors)

Nuclear structure theory. Technical progress report, September 1, 1982-August 31, 1984

International Nuclear Information System (INIS)

French, J.B.; Koltun, D.S.

1984-01-01

Research progress is reported. Spectral Averaging studies are outlined including the theory of level densities for interacting nucleons, the properties of single-particle nuclear excitations, spectral distributions for fixed symmetries, and applications to the secular behavior of fluctuation measures in complex nuclei. Collective States research is described, in particular the boson-fermion symmetries which are related to the U(5) limit of the interacting boson model. Nuclear Reaction studies are described including the statistical theory of pion absorption, direct reactions at intermediate energies, and the properties of the off-shell πN t-matrix. Progress is reported on the quark theory of nuclear matter and the construction of models for a Fermi fluid which, near the nuclear ground state, is a fluid of nucleons composed of quarks, and, at high densities or temperatures, is a quark fluid. Applications of formal scattering theory to the study of phase-conjugate optics are discussed. Publications are listed

Utica Shale Energy and Environment Laboratory Final Scientific/Technical Report

Energy Technology Data Exchange (ETDEWEB)

Cole, David Robert [The Ohio State Univ., Columbus, OH (United States); Allen, Gerald Robert [The Ohio State Univ., Columbus, OH (United States)

2017-12-29

The Ohio State University (OSU) was awarded a contract on October 1, 2014, from the Department of Energy National Energy Technology Laboratory (DOE-NETL) to develop the Utica Shale Energy and Environment Laboratory (USEEL) in the Utica-Point Pleasant shale play of the Appalachian Basin. It was designed to be an environmental and technology development lab that would enable the academic, industry, government, and non-governmental organization (NGO) research communities to better understand unconventional oil and gas (UOG) engineering practices and technology to increase production and safety, and decrease environmental effects. Political and economic consequences necessitated changes in project site location and design, from the Ohio State Eastern Agricultural Research Station (EARS) and the Muskingum Watershed Conservancy District (MWCD) in east-central Ohio to a site located at an Energy Corporation of America (ECA) Marcellus drill pad in Greene County, Pennsylvania. Although the overall project progressed little beyond planning and administration before termination on September 18, 2017, significant research and MS or PhD investigations were completed or continue today. An experimental study design for site specific and regional baseline assessments was developed utilizing ecoregions, United States Geological Survey (USGS) Hydraulic Unit Code watersheds, and GIS technology and databases. This can be utilized to build a defensible and scalable management and research framework for UOG investigations that can be extrapolated for predictive and comparative analyses. The most commonly mentioned perceived risks of shale energy development identified in a socioeconomic analysis included impacts to the environment and water resources, traffic and road deterioration, and crime. Economic benefits, such as the windfall wealth to residents, job opportunities, and the demand for hotels and restaurants emerged, as the main positive impact to the community. Preliminary results

Development of the Internet Library for the Second Progress Report on R and D for the geological disposal of HLW in Japan

International Nuclear Information System (INIS)

Shiotsuki, Masao; Ishikawa, Hirohisa

2000-01-01

This paper describes an Internet Library, the goal of which is to improve the quality assurance of the technical content of the Second Progress Report on R and D into the geological disposal of HLW in Japan. The Internet Library is used to centralize information management for the Second Progress Report. It uses a database system which stores a large quantity of technical memoranda and numeric data which provide the technical basis for the report. Members of the public and specialists are allowed access the data held on the system and may communicate their opinions and expert reviews, through the Internet. (author)

Office of Waste Isolation progress report, January 1978

International Nuclear Information System (INIS)

Zerby, C.D.

1978-01-01

This document, prepared to report progress on the National Waste Terminal Storage (NWTS) program, consists of project reports on work performed by organizations under subcontract to OWI, by DOE contractors, by OWI consultants, and by other federal agencies participating in the NWTS program. The project reports are made under the headings technical projects, facility projects, planning and analysis, and regulatory affairs

Office of Waste Isolation progress report, December 1977

International Nuclear Information System (INIS)

Zerby, C.D.

1976-01-01

This document reports progress on the OWI's portion of the National Waste Terminal Storage (NWTS) program. It comprises project reports on work performed by organizations under subcontract to OWI, by DOE contractors, by OWI consultants, and by other federal agencies participating in the NWTS program. They are made under the headings technical projects, facility projects, planning and analysis, and regulatory affairs

Office of Waste Isolation progress report, January 1978

Energy Technology Data Exchange (ETDEWEB)

Zerby, C.D.

1978-02-28

This document, prepared to report progress on the National Waste Terminal Storage (NWTS) program, consists of project reports on work performed by organizations under subcontract to OWI, by DOE contractors, by OWI consultants, and by other federal agencies participating in the NWTS program. The project reports are made under the headings technical projects, facility projects, planning and analysis, and regulatory affairs. (DLC)

Progress report of the Teilinstitut Nukleare Festkoerperphysik

International Nuclear Information System (INIS)

Heger, G.

1976-09-01

This progress report of the Teilinstitut Nukleare Festkoerperphysik covers the period from 1st June 1975 - 31st May 1976. The arrangement has been chosen to emphasis the main areas of research in which the institute is presently involved. These areas are Dynamics of Solids and Liquids, Electronic Structure and Magnetism of Solids and Development of Materials. Some of the technical developments relevant to these topics are also included. (orig.) [de

Project Progress Assessment Report (PPAR) 2015

International Nuclear Information System (INIS)

Sall, Baba

2015-01-01

This evaluation reports reviews basic information, output achievement, equipment and human resources, comment and recommendations. It highlights outputs Fully achieved, those which are partially achieved or in progress and also non achieved outputs. Regarding comments and lessons learned, counterpart stated that the overall timeline of the project is respected, even if activities are delayed to adapt to technical, financial and human resources constraints. The results obtained are in line with expectations thanks to a rigorously respected scientific approach. The Collegial Coordination of the project (DSV-LNERV-CIRAD) and the TO are in phase on the conduct of the Project the collection of baseline data is a crucial phase in the implementation of tsetse control programs. It makes it possible to implement a good strategy. The scientific and technical rigor and the good atmosphere within the Project team are also to be retained.

Project Progress Assessment Report (PPAR) 2012

International Nuclear Information System (INIS)

Sall, Baba

2012-01-01

This evaluation reports reviews basic information, output achievement, equipment and human resources, comment and recommendations. It highlights outputs Fully achieved, those which are partially achieved or in progress and also non achieved outputs. Regarding comments and lessons learned, counterpart stated that the overall timeline of the project is respected, even if activities are delayed to adapt to technical, financial and human resources constraints. The results obtained are in line with expectations thanks to a rigorously respected scientific approach. The Collegial Coordination of the project (DSV-LNERV-CIRAD) and the TO are in phase on the conduct of the Project the collection of baseline data is a crucial phase in the implementation of tsetse control programs. It makes it possible to implement a good strategy. The scientific and technical rigor and the good atmosphere within the Project team are also to be retained.

Study Progress of Physiological Responses in High Temperature Environment

Science.gov (United States)

Li, K.; Zheng, G. Z.; Bu, W. T.; Wang, Y. J.; Lu, Y. Z.

2017-10-01

Certain workers are exposed to high temperatures for a long time. Heat stress will result in a series of physiological responses, and cause adverse effects on the health and safety of workers. This paper summarizes the physiological changes of cardiovascular system, core temperature, skin temperature, water-electrolyte metabolism, alimentary system, neuroendocrine system, reaction time and thermal fatigue in high temperature environments. It can provide a theoretical guidance for labor safety in high temperature environment.

International Standards Development for Marine and Hydrokinetic Renewable Energy - Final Report on Technical Status

Energy Technology Data Exchange (ETDEWEB)

Rondorf, Neil E.; Busch, Jason; Kimball, Richard

2011-10-29

This report summarizes the progress toward development of International Standards for Marine and Hydrokinetic Renewable Energy, as funded by the U.S. Department of Energy (DOE) under the International Electrotechnical Commission (IEC) Technical Committee 114. The project has three main objectives: 1. Provide funding to support participation of key U.S. industry technical experts in 6 (originally 4) international working groups and/or project teams (the primary standards-making committees) and to attend technical meetings to ensure greater U.S. involvement in the development of these standards. 2. Provide a report to DOE and industry stakeholders summarizing the IEC standards development process for marine and hydrokinetic renewable energy, new international standards and their justifications, and provide standards guidance to industry members. 3. Provide a semi-annual (web-based) newsletter to the marine renewable energy community. The newsletter will educate industry members and stakeholders about the processes, progress, and needs of the US efforts to support the international standards development effort. The newsletter is available at www.TC114.us

Accelerator research studies: Technical progress report, June 1, 1988--May 31, 1989

International Nuclear Information System (INIS)

1989-01-01

This report discusses research progress in the following general topics: Study of transport and longitudinal compression of intense, high-brightness beams; study of collective ion acceleration by intense electron beams and pulse powered plasma focus; and study of microwave sources and parameter scaling for high-frequency electron-positron supercollider linacs

Progress Evaluation for the Restaurant Industry Assessed by a Voluntary Marketing-Mix and Choice-Architecture Framework That Offers Strategies to Nudge American Customers toward Healthy Food Environments, 2006–2017

Directory of Open Access Journals (Sweden)

Vivica Kraak

2017-07-01

Full Text Available Consumption of restaurant food and beverage products high in fat, sugar and sodium contribute to obesity and non-communicable diseases. We evaluated restaurant-sector progress to promote healthy food environments for Americans. We conducted a desk review of seven electronic databases (January 2006–January 2017 to examine restaurant strategies used to promote healthful options in the United States (U.S.. Evidence selection (n = 84 was guided by the LEAD principles (i.e., locate, evaluate, and assemble evidence to inform decisions and verified by data and investigator triangulation. A marketing-mix and choice-architecture framework was used to examine eight voluntary strategies (i.e., place, profile, portion, pricing, promotion, healthy default picks, priming or prompting and proximity to evaluate progress (i.e., no, limited, some or extensive toward 12 performance metrics based on available published evidence. The U.S. restaurant sector has made limited progress to use pricing, profile (reformulation, healthy default picks (choices, promotion (responsible marketing and priming and prompting (information and labeling; and some progress to reduce portions. No evidence was available to assess progress for place (ambience and proximity (positioning to promote healthy choices during the 10-year review period. Chain and non-chain restaurants can apply comprehensive marketing-mix and nudge strategies to promote healthy food environments for customers.

Fusion materials semiannual progress report for the period ending December 31, 1996

International Nuclear Information System (INIS)

1997-04-01

This is the twenty-first in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components. This effort forms one element of the materials program being conducted in support of the Fusion Energy Sciences Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The report covers the following topics: vanadium alloys; silicon carbide composite materials; ferritic/martensitic steels; copper alloys and high heat flux materials; austenitic stainless steels; insulating ceramics and optical materials; solid breeding materials; radiation effects, mechanistic studies and experimental methods; dosimetry, damage parameters, and activation calculations; materials engineering and design requirements; and irradiation facilities, test matrices, and experimental methods

Fusion materials semiannual progress report for the period ending December 31, 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-04-01

This is the twenty-first in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components. This effort forms one element of the materials program being conducted in support of the Fusion Energy Sciences Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The report covers the following topics: vanadium alloys; silicon carbide composite materials; ferritic/martensitic steels; copper alloys and high heat flux materials; austenitic stainless steels; insulating ceramics and optical materials; solid breeding materials; radiation effects, mechanistic studies and experimental methods; dosimetry, damage parameters, and activation calculations; materials engineering and design requirements; and irradiation facilities, test matrices, and experimental methods.

Technical progress report, October 1, 1980-September 30, 1981

International Nuclear Information System (INIS)

1981-01-01

Progress during the 12-month period, October 1, 1980 to September 30, 1981 on the University of Wisconsin Plasma Physics contract is described. Most of the work centers around two major experimental devices, the Levitated Octupole and Tokapole II. A major upgrade of the Octupole is underway to include 2 MW of ICRH and 1.8 MW of neutral beam heating. Meanwhile, gun optimization and low field operation has resulted in the attainment of 35% beta, a factor of 9 above the single fluid ballooning limit. The ICRH experiment is well underway, and the first neutral beam source has been installed. The Tokapole is operating reliably at the full design field of 10 kG with 12 msec discharges. Low q (approx. 0.4) discharges with flat current profiles are obtained at reduced (approx. 3kG) toroidal field. The device is presently being used to study shear Alfven wave heating, ECRH startup, poloidal ohmic heating, and plasma transport

Natural radiation environment

International Nuclear Information System (INIS)

Vohra, K.G.; Mishra, U.C.; Pillai, K.C.; Sadasivan, S.

1982-01-01

The volume presented contains papers presented at the Second Special Symposium on Natural Radiation Environment held at Bombay, India, during January 1981. The papers deal with such topics as : 1)high natural radiation background areas; 2)environmental natural radioactivity; 3)measurement techniques; 4)technologically enhanced radioactivity; 5)indoor radiation environment; 6)radon and daughters in ambient air, and 7)applications in Geosciences. Each of the 87 papers presented has been abstracted and indexed for the U.S. Department of Energy Technical Information Center's Energy Data Base

Productivity Measurement Of Technical Institute

Directory of Open Access Journals (Sweden)

Miss.Pooja Yadav

2015-05-01

Full Text Available Abstract The increasing concern over globalization between other things has made the achievement of lifetime skills vital for all classes of people. Achievement of such skills can be developed from technical education programs in the advance of any nation. Skill gaining provides knowledge and inculcates the approaches that are essential for arrival and progress into an occupation. When skills are developed in any occupation it will provide and improve the standard of living with the cover beside poverty thereby behind national development. This paper observes sampling distribution and moving average concept that how technical education can generate the required skills the significance of skill acquisition its roles benefits and sustainability in national development. It also mentions among others that government should look into and improve productivity that can encourage skill achievement for the youths. The solutions are divided the sampling box into few group before stacking up workstation and use table and some other wood product. Cost reduction for each solution was intended and the solution with highest cost decrease is chosen to increase the productivity of the college.

Energy resources technical training and development programs for American Indians

Energy Technology Data Exchange (ETDEWEB)

Cameron, R E; White, W S

1978-08-01

Because of the energy resources located on Native American owned lands, it is pertinent that the tribes on these reservations receive information, training, and technical assistance concerning energy and the environment and the decisions that must be made about energy-resource development. In the past, attempts to enlist Indians in technical-assistance programs met with little success because teaching methods seldom incorporated program planning by both tribal leaders and the technical training staff. Several technical-assistance programs given on reservations in the central and western parts of the country were conducted by Argonne National Lab.--programs that stressed practical, on-the-job experience through lecture, laboratory, and field studies. Each program was designed by ANL and tribal leaders to fit the needs and concerns of a particular tribe for its environment. The individual programs met with an impressive degree of success; they also prompted several Indians to pursue this type of education further at ANL and local Indian community colleges and to obtain funds for energy projects. Despite the positive feedback, several difficulties were encountered. Among them are the necessity to continually modify the programs to fit diverse tribal needs, to diminish politically motivated interference, and to increase portions of the funding to involve more Native Americans.

Technical Co-operation Report for 1996. Report by the Director General

International Nuclear Information System (INIS)

1997-01-01

The Agency's Technical Cooperation (TC) Programme made further progress during 1996 in implementing recent initiatives to strengthen efficiency and effectiveness. These initiatives seek to maximize the developmental contribution of counterpart institutions by emphasizing the management of technology to solve social and economic problems. The new direction has been embodied in the term ''Partners in Development''. The Partners in Development approach is reflected in last year's Report to the Board of Governors and the General Conference on Strengthening of the Agency's Technical Co-operation Activities, which provided an update on ongoing activities and elaborated new initiatives. The 1995 Technical Cooperation Report focused on the progress in implementing these initiatives. Next year, the Secretariat plans to combine the TC Report with the Report on Strengthening of the Agency's Technical Co-operation Activities in order to improve the clarity, consistency and economy of these presentations. Establishing a development partnership with Member States is the central goal of a new Strategy for TC. The refinement of this strategy required considerable effort during 1996, when the process first began to define objectives, targets and the means of accomplishing them. Alongside internal consultations, the role of SAGTAC became instrumental in reaching consensus on the main elements of the strategy. Future efforts include the formulation of implementation plans for the strategy. Once completed, the strategy will be presented to the TACC and Board in 1997. Reflecting these developments, section A of this Report presents the basic features of the TC Strategy, and the approach to be taken to achieve its objectives. The Strategy addresses among others the recommendations contained in resolution GC(40)/RES/13 on the Strengthening of Technical Co-operation: activities to improve the scientific and technological capabilities of developing countries; to achieve sustainable

The 1989 progress report: Polytechnic school laboratories' Direction

International Nuclear Information System (INIS)

1989-01-01

The 1989 progress report of the laboratories' Direction of the Polytechnic School (France) is presented. The research activities carried out in each laboratory are summarized. Scientific and technical cooperation, financial and employement aspects are included. The main fields of research are: biochemistry, chemistry, reaction mechanisms, organic synthesis, mechanics of solids, meteorology, irradiated solids, optics, physics, biophysics, lasers, mathematics, econometrics, epistemology, management and computer science [fr

Office of Waste Isolation progress report, December 1977

Energy Technology Data Exchange (ETDEWEB)

Zerby, C.D.

1976-01-31

This document reports progress on the OWI's portion of the National Waste Terminal Storage (NWTS) program. It comprises project reports on work performed by organizations under subcontract to OWI, by DOE contractors, by OWI consultants, and by other federal agencies participating in the NWTS program. They are made under the headings technical projects, facility projects, planning and analysis, and regulatory affairs. (DLC)

The impact of the endogenous technical change on climate policies

International Nuclear Information System (INIS)

Sassi, O.

2008-11-01

This research aims at revisiting the 'autonomous vs. induced' debate on the costs of climate policies, first by broadening the framework of the technical change induction to other economical sectors, and then by attempting to go beyond the concept of technical change induction and think in terms of a structural change induction. After a review of modes of representation of the technical progress in economical prospective models for the assessment of climate policies, the author presents the IMACLIM-R model, a recursive general equilibrium model which simulates the evolution of the world economy within 12 regions and 12 sectors between 2001 and 2100. The results obtained with this model are then presented and discussed, in the case of a reference scenario which displays a significant change towards a carbon-intensive path. These results stress the risks related to a 'laissez faire' attitude. The author explores the consequences in terms of climate policies with a more or less extended taking into account of phenomena of induction of technical and structural changes

Interactive Environment Design in Smart City

Science.gov (United States)

Deng, DeXiang; Chen, LanSha; Zhou, Xi

2017-08-01

The interactive environment design of smart city is not just an interactive progress or interactive mode design, rather than generate an environment such as the “organic” life entity as human beings through interactive design, forming a smart environment with perception, memory, thinking, and reaction.

Building Professional and Technical Skills in the Use of Earth Observations through the NASA DEVELOP National Program: Best Practices & Lessons Learned

Science.gov (United States)

Crepps, G.; Ross, K. W.; Childs-Gleason, L. M.; Allsbrook, K. N.; Rogers, L.; Ruiz, M. L.; Clayton, A.

2017-12-01

The NASA DEVELOP National Program offers 10-week research opportunities to participants to work on rapid feasibility projects utilizing NASA Earth observations in a variety of applications, including ecological forecasting, water resources, disasters, and health and air quality. DEVELOP offers a unique collaborative environment in which students, recent graduates, and transitioning career professionals are placed on interdisciplinary teams to conduct projects. DEVELOP offers a variety of opportunities and resources to build participants technical skills in remote sensing and GIS, as well as interpersonal and leadership skills. As a capacity building program, DEVELOP assesses participants' growth by using entrance and exit personal growth assessments, as well as gathering general program feedback through an exit survey. All of this information is fed back into the program for continual improvement. DEVELOP also offers a progression of opportunities through which participants can advance through the program, allowing participants to build a diverse set of technical and leadership skills. This presentation will explore best practices including the use of pre- and post-growth assessments, offering advanced leadership opportunities, and overall capacity building impacts on participants.

The energy for the 21. century: techniques, economy and environment

International Nuclear Information System (INIS)

2000-01-01

12 papers have been presented. 1) Climate changing. The atmospheric circulation model coupled to the ocean model is the most powerful current tool to explain climate processes and to validate possible climate evolutions. 2) Health hazards due to the combustion of fossil fuels. The effects of atmospheric particles on mortality, cancer risks and on respiratory organs, are considered. 3) The evaluation of external effects of transport on the environment. The paper gives examples of exposure-response function relating to impacts on the built environment, atmospheric visibility, vegetation and human health. 4) Energy consumption and economic growth. 5) Impact of low radiation doses on human health. 6) Hydrogen: production methods and costs. 7) Fossil energies reserves: incertitude on definition, volume and forecasting. 8) Energetic valorization of biomass by thermo-chemical way. 9) Technical and economic aspects of wind energy. 10) Nuclear energy: the French example. 11) The future of photovoltaic energy, its actual growth rate is about 25-35 % a year and its main asset is to benefit technological progress that allows a sharp 50 % cut in costs every 10 years. 12) Fuel cells, their operating principle, the fuel used, their applications and perspective. (A.C.)

Technical Cooperation Report for 2014. Report by the Director General [Chinese Version

International Nuclear Information System (INIS)

2015-06-01

enhancements to the Project Progress Assessment Report. Part B of this document presents a summary of financial and non-financial programme delivery indicators. It reviews the resources mobilized for the TC programme through the Technical Cooperation Fund (TCF), and through extrabudgetary and in-kind contributions. Payments to the TCF in 2014 totalled €62.0 million (not including National Participation Costs, assessed programme costs or miscellaneous income), or 89.5% of the TCF target set for the year. New extrabudgetary resources for 2014 came to €18.6 million and in-kind contributions were €0.6 million. Overall, implementation for the TCF reached 78% in 2014. Part C of this document responds to the operative paragraphs of resolution GC(58)/RES/12, and covers assistance to Member States in the peaceful, safe, secure and regulated application of atomic energy and nuclear techniques in specific fields. It highlights regional activities and achievements in technical cooperation in 2014. Globally, health and nutrition accounted for the highest proportion of actuals 1 through the TC programme in 2014, followed by safety and security, and then by food and agriculture. Project examples are presented in Annex 1 according to thematic area, covering health and nutrition, food and agriculture, water and the environment, industrial applications, energy planning and nuclear power, radiation protection, nuclear safety and nuclear security, and nuclear knowledge development and management. The activities of the Programme of Action for Cancer Therapy are covered in Annex 2

Technical Cooperation Report for 2014. Report by the Director General [Arabic Version

International Nuclear Information System (INIS)

2015-06-01

enhancements to the Project Progress Assessment Report. Part B of this document presents a summary of financial and non-financial programme delivery indicators. It reviews the resources mobilized for the TC programme through the Technical Cooperation Fund (TCF), and through extrabudgetary and in-kind contributions. Payments to the TCF in 2014 totalled €62.0 million (not including National Participation Costs, assessed programme costs or miscellaneous income), or 89.5% of the TCF target set for the year. New extrabudgetary resources for 2014 came to €18.6 million and in-kind contributions were €0.6 million. Overall, implementation for the TCF reached 78% in 2014. Part C of this document responds to the operative paragraphs of resolution GC(58)/RES/12, and covers assistance to Member States in the peaceful, safe, secure and regulated application of atomic energy and nuclear techniques in specific fields. It highlights regional activities and achievements in technical cooperation in 2014. Globally, health and nutrition accounted for the highest proportion of actuals 1 through the TC programme in 2014, followed by safety and security, and then by food and agriculture. Project examples are presented in Annex 1 according to thematic area, covering health and nutrition, food and agriculture, water and the environment, industrial applications, energy planning and nuclear power, radiation protection, nuclear safety and nuclear security, and nuclear knowledge development and management. The activities of the Programme of Action for Cancer Therapy are covered in Annex 2

Technical progress, the concept of individualized cancer treatment and the innovation of computer-assisted radiotherapy planning

International Nuclear Information System (INIS)

Merkle, K.; Tanneberger, S.; Matschke, S.

1985-01-01

After a first step of cancerogenesis, the further development of the tumor is an individual process. At the end of this process the tumor is formed as an individual in the individual. The individuality of cancer exists on the level of organs, tissues and cells and includes an individual tumor-host relationship. Today, optimized cancer treatment requires a most precise biological characterization possible of the tumor and of the tumor-host relationship, which will provide objective information about the individual character of every tumor. Routine analysis and strict therapeutic consideration of the clinical and biological individuality of human cancer can offer real chances for the improvement of cancer treatment. A routine acquisition of individual tumor characteristics will be possible only if methods and equipment are available for the registration of suitable parameters. In this context technical innovations have an essential influence on the realization of the concept of individualized cancer treatment. With the method of flow cytophotometry and other techniques examples are given in how far the ideas of individual cancer management can be realized by introduction of new technical solutions into medical research and clinical practice. Unfortunately there is still a lack of methodology in individualizing cancer treatment. The individualization of radiotherapy is connected to an extremely high degree of technical innovations. Particularly this refers to the topometrical description of the target volume in relation to the adjacent anatomical structures and the body contour as well as the fitting of isodoses to the shape and size of the target volume. As an example of innovation of a technical solution for individual radiotherapy planning the computer-assisted radiotherapy planning system DOPSY is described. (author)

Ecological and technical situation of flooded oil wells in Kazakhstan

International Nuclear Information System (INIS)

Kuterbekov, K. A.; Kabdrakhimova, G. D.; Nurakhmetov, T. N.; Zhaksigulova, A.; Nukenov, D. N.; Kushkimbaev, B. M.; Nurmukhanbetova, A. K.

2012-01-01

The data of ecological and technical condition of flooded and inundated wells in Atyrau and Mangystau regions of the West of Kazakhstan is given in this abstract. There is necessary to elaborate methods for liquidation, individual plans of conservations, to produce isolating and liquidation procedures on wells and to estimate environment effects. Also we will provide for estimation technical condition of conservation oil wells on territory of flooded by Caspian sea. (Authors)

Power system technical performance issues related to the application of long HVAC cables

DEFF Research Database (Denmark)

Wiechowski, on behalf of Cigre WG C4.502, W.; Sluis, L. V. der; Ohno, Teruo

2011-01-01

This paper reports the progress of work of Cigre Working Group C4.502 “Power system technical performance issues related to the application of long HVAC cables”. The primary goal of the WG C4.502 is to write a technical brochure that will serve as practical guide for performing studies necessary...... for assessing the technical performance of HV/EHV systems with large share of AC cable lines. This paper besides providing a background for formulation of WG C4.502 and its overall aim, describes the tasks that were accomplished before the interim report was submitted to Study Committee C4 System Technical...... Performance in August 2010. The work in the WG is ongoing and final report will be ready according to the time schedule in 2012. The focus of this paper is in particular to show all issues related to system technical performance with assigned weights in terms of their importance and/or uniqueness for cable...

A technical solution to a difficult problem - An update

International Nuclear Information System (INIS)

Asselstine, J.K.

1985-01-01

A goal of the Reduced Enrichment Research and Test Reactor Program (RERTR) established by the U.S. Department of Energy is to develop the technical means needed to utilize LEU instead of HEU fuels in research and test reactors and to do so without operational penalties and without affecting safety characteristics. This goal has been pursued now for seven years in cooperation with many of you who are participants in this conference. The program has made significant progress in the development, demonstration and application of new LEU research reactor fuels. According to recent projections, the percentage of HEU fuel in international commerce which is technically replaceable with LEU fuels has been growing steadily as research continues. There appears to be no technical barrier to eventual replacement of HEU fuel with LEU fuel in research and test reactors. While there are many politically complex and technically difficult issues involved in nonproliferation, I conclude that the use of highly enriched weapons grade uranium as a fuel in civilian research reactors stands out as one problem which has a straight forward technical solution. The technical solution is the effort you in the RERTR program are embarked on. Once that solution is in hand, the operators of research reactors are urged to take political and legal initiatives to make the conversion happen. By effecting this conversion they will help minimize the trade in highly enriched uranium and make the world a little safer

A technical solution to a difficult problem - An update

Energy Technology Data Exchange (ETDEWEB)

Asselstine, J K

1985-07-01

A goal of the Reduced Enrichment Research and Test Reactor Program (RERTR) established by the U.S. Department of Energy is to develop the technical means needed to utilize LEU instead of HEU fuels in research and test reactors and to do so without operational penalties and without affecting safety characteristics. This goal has been pursued now for seven years in cooperation with many of you who are participants in this conference. The program has made significant progress in the development, demonstration and application of new LEU research reactor fuels. According to recent projections, the percentage of HEU fuel in international commerce which is technically replaceable with LEU fuels has been growing steadily as research continues. There appears to be no technical barrier to eventual replacement of HEU fuel with LEU fuel in research and test reactors. While there are many politically complex and technically difficult issues involved in nonproliferation, I conclude that the use of highly enriched weapons grade uranium as a fuel in civilian research reactors stands out as one problem which has a straight forward technical solution. The technical solution is the effort you in the RERTR program are embarked on. Once that solution is in hand, the operators of research reactors are urged to take political and legal initiatives to make the conversion happen. By effecting this conversion they will help minimize the trade in highly enriched uranium and make the world a little safer.

Progress report No. 2 on the Scientific Investigation Program for the Nevada Yucca Mountain Site, October 1, 1989--March 31, 1990

International Nuclear Information System (INIS)

1990-01-01

In accordance with the requirements of Section 113(b)(3) of the Nuclear Waste Policy Act of 1982 (Pub. L. No. 97-425), as amended, the US Department of Energy (DOE) has prepared this report on the progress of scientific investigation activities at Yucca Mountain in southern Nevada for October 1, 1989, through March 31, 1990. This report is the second of a series of reports that are issued at intervals of approximately six months during the period of scientific investigation. The progress report presents short summaries of the status of scientific investigation activities and cites technical reports and research products that provide more detailed information on the activities. The report provides highlights of work started during the reporting period, work in progress, and work completed and documented during the reporting period. In addition, the report is the vehicle for discussing major changes, if any, to the DOE's scientific investigation program. The progress report conveys information in a convenient summary form to be used for informational purposes only. It is not intended to be the mechanism for controlling and documenting technical or policy positions regarding changes in schedules or the technical program. Such changes are controlled through rigorous DOE change-control procedures. The progress report only describes such approval changes. 49 refs., 3 tabs

Nuclear-waste management semiannual progress report, April 1982-September 1982

International Nuclear Information System (INIS)

Chikalla, T.D.; Powell, J.A.

1982-12-01

This document is one of a series of technical progress reports designed to report on radioactive waste management programs at Pacific Northwest Laboratory. Accomplishments in the following programs are reported: waste treatment; nuclear waste Materials Characterization Center (MCC); airborne waste management; low-level waste management; waste isolation; remedial actions; and supporting studies

High-Efficiency Nitride-Based Solid-State Lighting. Final Technical Progress Report

International Nuclear Information System (INIS)

Paul T. Fini; Shuji Nakamura

2005-01-01

In this final technical progress report we summarize research accomplished during Department of Energy contract DE-FC26-01NT41203, entitled ''High-Efficiency Nitride-Based Solid-State Lighting''. Two teams, from the University of California at Santa Barbara (Principle Investigator: Dr. Shuji Nakamura) and the Lighting Research Center at Rensselaer Polytechnic Institute (led by Dr. N. Narendran), pursued the goals of this contract from thin film growth, characterization, and packaging/luminaire design standpoints. The UCSB team initially pursued the development of blue gallium nitride (GaN)-based vertical-cavity surface-emitting lasers, as well as ultraviolet GaN-based light emitting diodes (LEDs). In Year 2, the emphasis shifted to resonant-cavity light emitting diodes, also known as micro-cavity LEDs when extremely thin device cavities are fabricated. These devices have very directional emission and higher light extraction efficiency than conventional LEDs. Via the optimization of thin-film growth and refinement of device processing, we decreased the total cavity thickness to less than 1 (micro)m, such that micro-cavity effects were clearly observed and a light extraction efficiency of over 10% was reached. We also began the development of photonic crystals for increased light extraction, in particular for so-called ''guided modes'' which would otherwise propagate laterally in the device and be re-absorbed. Finally, we pursued the growth of smooth, high-quality nonpolar a-plane and m-plane GaN films, as well as blue light emitting diodes on these novel films. Initial nonpolar LEDs showed the expected behavior of negligible peak wavelength shift with increasing drive current. M-plane LEDs in particular show promise, as unpackaged devices had unsaturated optical output power of ∼ 3 mW at 200 mA drive current. The LRC's tasks were aimed at developing the subcomponents necessary for packaging UCSB's light emitting diodes, and packaging them to produce a white light

Nuclear Safety: Volume 29, No. 3: Technical progress review

Energy Technology Data Exchange (ETDEWEB)

Silver, E G [ed.

1988-07-01

Nuclear Safety is a review journal that covers significant development in the field of nuclear safety. Its scope included the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Individual papers have been cataloged separately.

Technical efficiency and productivity of Chinese county hospitals: an exploratory study in Henan province, China.

Science.gov (United States)

Cheng, Zhaohui; Tao, Hongbing; Cai, Miao; Lin, Haifeng; Lin, Xiaojun; Shu, Qin; Zhang, Ru-Ning

2015-09-09

Chinese county hospitals have been excessively enlarging their scale during the healthcare reform since 2009. The purpose of this paper is to examine the technical efficiency and productivity of county hospitals during the reform process, and to determine whether, and how, efficiency is affected by various factors. 114 sample county hospitals were selected from Henan province, China, from 2010 to 2012. Data envelopment analysis was employed to estimate the technical and scale efficiency of sample hospitals. The Malmquist index was used to calculate productivity changes over time. Tobit regression was used to regress against 4 environmental factors and 5 institutional factors that affected the technical efficiency. (1) 112 (98.2%), 112 (98.2%) and 104 (91.2%) of the 114 sample hospitals ran inefficiently in 2010, 2011 and 2012, with average technical efficiency of 0.697, 0.748 and 0.790, respectively. (2) On average, during 2010-2012, productivity of sample county hospitals increased by 7.8%, which was produced by the progress in technical efficiency changes and technological changes of 0.9% and 6.8%, respectively. (3) Tobit regression analysis indicated that government subsidy, hospital size with above 618 beds and average length of stay assumed a negative sign with technical efficiency; bed occupancy rate, ratio of beds to nurses and ratio of nurses to physicians assumed a positive sign with technical efficiency. There was considerable space for technical efficiency improvement in Henan county hospitals. During 2010-2012, sample hospitals experienced productivity progress; however, the adverse change in pure technical efficiency should be emphasised. Moreover, according to the Tobit results, policy interventions that strictly supervise hospital bed scale, shorten the average length of stay and coordinate the proportion among physicians, nurses and beds, would benefit hospital efficiency. Published by the BMJ Publishing Group Limited. For permission to use (where

Experimental Program Final Technical Progress Report: 15 February 2007 to 30 September 2012

Energy Technology Data Exchange (ETDEWEB)

Kinney, Edward R. [University of Colorado, Boulder, CO

2014-09-12

This is the final technical report of the grant DE-FG02-04ER41301 to the University of Colorado at Boulder entitled "Intermediate Energy Nuclear Physics" and describes the results of our funded activities during the period 15 February 2007 to 30 September 2012. These activities were primarily carried out at Fermilab, RHIC, and the German lab DESY. Significant advances in these experiments were carried out by members of the Colorado group and are described in detail.

Organizational Routines as Coupling Mechanisms: Policy, School Administration, and the Technical Core

Science.gov (United States)

Spillane, James P.; Parise, Leigh Mesler; Sherer, Jennifer Zoltners

2011-01-01

The institutional environment of America's schools has changed substantially as government regulation has focused increasingly on the core technical work of schools--instruction. The authors explore the school administrative response to this changing environment, describing how government regulation becomes embodied in the formal structure of four…

Physics of correlated systems. Technical progress report, December 1996 - June 1999

International Nuclear Information System (INIS)

Greene, C.H.

1999-01-01

During the current funding period, which covers a period of approximately 2.5 years, the authors have tackled a number of challenging problems that involve nonperturbative particle-particle interactions in two qualitatively different areas: electron-electron interactions in photoionization and photodetachment, and atom-atom interactions in Bose-Einstein condensates. The following discusses the progress achieved in these different areas. The emphasis in this summary will concentrate on approximately the last year of research accomplishments, although the bibliography below includes all research publications that were supported during the time period of this grant

Technical report on the accelerators

Energy Technology Data Exchange (ETDEWEB)

Bex, L [ed.

1996-12-31

GANIL operation and the technical studies performed in 1994 are described. The milestones for 1994 are: SISSI (Source d`Ions Secondaires a Supraconducteurs Intense) has been in operation and used for secondary beam production with four different primary beams. The 100 kV platform for beam injection in the CO1 has been in operation for production of metallic beams which demand is increasing. Finally the SPIRAL project (Systeme de Production d`Ions Radioactifs Acceleres en Ligne) is in progress. In late 1994 the civil work has started in view of the installation of the machine in the north part of the GANIL machine building. (K.A.). 48 refs.

Technical report on the accelerators

International Nuclear Information System (INIS)

Bex, L.

1995-01-01

GANIL operation and the technical studies performed in 1994 are described. The milestones for 1994 are: SISSI (Source d'Ions Secondaires a Supraconducteurs Intense) has been in operation and used for secondary beam production with four different primary beams. The 100 kV platform for beam injection in the CO1 has been in operation for production of metallic beams which demand is increasing. Finally the SPIRAL project (Systeme de Production d'Ions Radioactifs Acceleres en Ligne) is in progress. In late 1994 the civil work has started in view of the installation of the machine in the north part of the GANIL machine building. (K.A.)

[Charles Darwin and the problem of evolutionary progress].

Science.gov (United States)

Iordanskiĭ, N N

2010-01-01

According to Ch. Darwin's evolutionary theory, evolutionary progress (interpreted as morpho-physiological progress or arogenesis in recent terminology) is one of logical results of natural selection. At the same time, natural selection does not hold any factors especially promoting evolutionary progress. Darwin emphasized that the pattern of evolutionary changes depends on organism nature more than on the pattern of environment changes. Arogenesis specificity is determined by organization of rigorous biological systems - integral organisms. Onward progressive development is determined by fundamental features of living organisms: metabolism and homeostasis. The concept of social Darwinism differs fundamentally from Darwin's ideas about the most important role of social instincts in progress of mankind. Competition and selection play secondary role in socio-cultural progress of human society.

Review and comment on the advanced spent fuel management process (1): Technical aspects and non-proliferation concerns

International Nuclear Information System (INIS)

Song, Yo Taik

2001-01-01

Efforts are made to analyze the project, the Advanced Spent Fuel Management Technology (ASFMT), which is currently carried out at Korea Atomic Energy Research Institute, on the technical feasibility and validity as well as on the nuclear non-proliferation concerns. The project is a part of a program under the 'Long and Midterm Nuclear Development Program'. On the technical analysis, reviewed the papers presented at the national and international meetings on the subject by KAERI staffs, and also participated to various technical discussions on the 'Mock-up Test', currently in progress. On the non-proliferation concerns, the ASFMT project was reviewed and analyzed in reference to various programs currently in progress or in a formulation stages in US, such as the DOE TOPS and ATW. Further reviewed the past JASNEC process and programs for possible application of the ASFMT project for JASNEC project. Provided a few thoughts for effectively carrying out the ASFMT project, and a plan for the next phase is presented

Review and comment on the advanced spent fuel management process (1): Technical aspects and non-proliferation concerns

Energy Technology Data Exchange (ETDEWEB)

Song, Yo Taik

2001-01-01

Efforts are made to analyze the project, the Advanced Spent Fuel Management Technology (ASFMT), which is currently carried out at Korea Atomic Energy Research Institute, on the technical feasibility and validity as well as on the nuclear non-proliferation concerns. The project is a part of a program under the 'Long and Midterm Nuclear Development Program'. On the technical analysis, reviewed the papers presented at the national and international meetings on the subject by KAERI staffs, and also participated to various technical discussions on the 'Mock-up Test', currently in progress. On the non-proliferation concerns, the ASFMT project was reviewed and analyzed in reference to various programs currently in progress or in a formulation stages in US, such as the DOE TOPS and ATW. Further reviewed the past JASNEC process and programs for possible application of the ASFMT project for JASNEC project. Provided a few thoughts for effectively carrying out the ASFMT project, and a plan for the next phase is presented.

QUIESST: mid-term progress report

NARCIS (Netherlands)

Clairbois, J.-P.; Roo, F. de; Garai, M.; Conter, M.; Defrance, J.; Oltean-Dumbrava, C.; Fusco, I.

2011-01-01

The research QUIESST (QUIetening the Environment of Sustainable Surface Transport) successfully started in November 2009 for 36 months, its objectives and work schedule have already been presented at the INTERNOISE 2010 Congress. This paper will present the progress report at mid-term (18 months):

The Development of CBM Vocabulary Measures: Grade 5. Technical Report #1212

Science.gov (United States)

Alonzo, Julie; Anderson, Daniel; Park, Bitnara Jasmine; Tindal, Gerald

2012-01-01

In this technical report, we describe the development and piloting of a series of vocabulary assessments intended for use with students in grades two through eight. These measures, available as part of easyCBM[TM], an online progress monitoring and benchmark/screening assessment system, were developed in 2010 and administered to approximately 1200…

The Development of CBM Vocabulary Measures: Grade 7. Technical Report #1214

Science.gov (United States)

Alonzo, Julie; Anderson, Daniel; Park, Bitnara Jasmine; Tindal, Gerald

2012-01-01

In this technical report, we describe the development and piloting of a series of vocabulary assessments intended for use with students in grades two through eight. These measures, available as part of easyCBM[TM], an online progress monitoring and benchmark/screening assessment system, were developed in 2010 and administered to approximately 1200…

The Development of CBM Vocabulary Measures: Grade 6. Technical Report # 1213

Science.gov (United States)

Alonzo, Julie; Anderson, Daniel; Park, Bitnara Jasmine; Tindal, Gerald

2012-01-01

In this technical report, we describe the development and piloting of a series of vocabulary assessments intended for use with students in grades two through eight. These measures, available as part of easyCBM[TM], an online progress monitoring and benchmark/screening assessment system, were developed in 2010 and administered to approximately 1200…

The Development of CBM Vocabulary Measures: Grade 3. Technical Report #1210

Science.gov (United States)

Alonzo, Julie; Anderson, Daniel; Park, Bitnara Jasmine; Tindal, Gerald

2012-01-01

In this technical report, we describe the development and piloting of a series of vocabulary assessments intended for use with students in grades two through eight. These measures, available as part of easyCBM[TM], an online progress monitoring and benchmark/screening assessment system, were developed in 2010 and administered to approximately 1200…

The Development of CBM Vocabulary Measures: Grade 4. Technical Report #1211

Science.gov (United States)

Alonzo, Julie; Anderson, Daniel; Park, Bitnara Jasmine; Tindal, Gerald

2012-01-01

In this technical report, we describe the development and piloting of a series of vocabulary assessments intended for use with students in grades two through eight. These measures, available as part of easyCBM[TM], an online progress monitoring and benchmark/screening assessment system, were developed in 2010 and administered to approximately 1200…

The Development of CBM Vocabulary Measures: Grade 8. Technical Report #1215

Science.gov (United States)

Alonzo, Julie; Anderson, Daniel; Park, Bitnara Jasmine; Tindal, Gerald

2012-01-01

In this technical report, we describe the development and piloting of a series of vocabulary assessments intended for use with students in grades two through eight. These measures, available as part of easyCBM[TM], an online progress monitoring and benchmark/screening assessment system, were developed in 2010 and administered to approximately 1200…

The Development of CBM Vocabulary Measures: Grade 2. Technical Report #1209

Science.gov (United States)

Alonzo, Julie; Anderson, Daniel; Park, Bitnara Jasmine; Tindal, Gerald

2012-01-01

In this technical report, we describe the development and piloting of a series of vocabulary assessments intended for use with students in grades two through eight. These measures, available as part of easyCBM[TM], an online progress monitoring and benchmark/screening assessment system, were developed in 2010 and administered to approximately 1200…

Progress report of the Teilinstitut Nukleare Festkoerperphysik

International Nuclear Information System (INIS)

Geerk, J.; Linker, G.

1977-10-01

This progress report of the Teilinstitut Nukleare Festkoerperphysik covers the period from June 1sup(st), 1976 - May 31sup(st), 1977. The arrangement has been chosen to emphasize the main research areas the institute is presently involved. These areas are the Dynamics of Solids and Liquids, the Electronic Structure and Magnetism of Solids, and the Development and Investigation of New Materials. Some of the technical developments relevant to these topics are also included. (orig.) [de

National Waste Terminal Storage Program. Progress report, October 1, 1976--September 30, 1977

International Nuclear Information System (INIS)

Asher, J.M.

1978-04-01

The National Waste Terminal Storage Program Report comprises five sections: technical projects, facility projects, planning and analysis, regulatory affairs, and public affairs. Progress made in these areas during the period October 1, 1976, to September 30, 1977, is reported

U.C. Davis high energy particle physics research: Technical progress report -- 1990

Energy Technology Data Exchange (ETDEWEB)

NONE

1990-12-31

Summaries of progress made for this period is given for each of the following areas: (1) Task A--Experiment, H1 detector at DESY; (2) Task C--Experiment, AMY detector at KEK; (3) Task D--Experiment, fixed target detectors at Fermilab; (4) Task F--Experiment, PEP detector at SLAC and pixel detector; (5) Task B--Theory, particle physics; and (6) Task E--Theory, particle physics.

The role of environment design in an educational Multi-User Virtual Environment

DEFF Research Database (Denmark)

Papachristos, Nikiforos; Vrellis, Ioannis; Natsis, Antonios

2014-01-01

This paper presents empirical results from an exploratory study conducted in an authentic educational situation with preservice education students enrolled in an undergraduate course, which was partially taught in Second Life. The study investigated the effect of environment design on presence, l...... necessary for all students to become familiar with the virtual environment and possible time losses due to technical issues. This study could act as support to construct and test hypotheses regarding the role of educational setting design in teaching and learning in MUVEs....

Divisional progress reports for period 1 July 1982 to 30 June 1983

International Nuclear Information System (INIS)

1984-09-01

This progress report deals with technical and research work done at the AAEC Research establishment for the period 1 July 1982 to 30 June 1983. Work done in the following divisions is reported: Applied Mathematics and Computing, Applied Physics, Environmental Science, Isotope, Materials, Nuclear Technology

METHOD IMPROVEMENT FOR DETERMINING THE TECHNICAL LEVEL OF CIVIL AIRCRAFT

Directory of Open Access Journals (Sweden)

2016-01-01

Full Text Available Aircraft are high-tech engineering products which are characterized by a wide range of properties including the two most important groups that respectively characterize the efficiency and technical level.Improving the aircraft efficiency is an essential factor for air transport development, but the efficiency can not be fully describe the technical system, especially in forecasting and new technology requirements development. Aircraft de- signer must evaluate the prospects of a technical solution, but it’s not always possible to calculate the efficiency accuratelyat the design stage. The operator should be able to choose the most technically-advanced aircraft available in the market inorder not to let it grow obsolete quickly. This determines the need for non-economic evaluation of technical systems that can be done by assessment of their technical level.The technical level is a general index that includes a set of technical perfection indicators. Technical perfection is reflected in terms of material and energy intensity, in terms of ergonomics, safety, etc. and is achieved as a result of origi- nal design solutions, the use of new high-strength low-density materials, the introduction of advanced technological pro-cesses, calculation methods, verification, testing, etc.There is a tight connection between the product properties and its weight, because weight is the material reflection of these properties. Therefore, improvement of the product properties usually leads to an intense increase of its weight. To deal with this phenomenon is only possible with widely using scientific and technical progress results. In accordance with this, the technical perfection can be interpreted as a major component of quality that is created without the weight increase. This approach requires investment in research and testing new technical solutions.The method was developed to determine the technical level of civil long-haul aircraft which has been modified to

Recent Progress on PZT Based Piezoelectric Energy Harvesting Technologies

Directory of Open Access Journals (Sweden)

Min-Gyu Kang

2016-02-01

Full Text Available Energy harvesting is the most effective way to respond to the energy shortage and to produce sustainable power sources from the surrounding environment. The energy harvesting technology enables scavenging electrical energy from wasted energy sources, which always exist everywhere, such as in heat, fluids, vibrations, etc. In particular, piezoelectric energy harvesting, which uses a direct energy conversion from vibrations and mechanical deformation to the electrical energy, is a promising technique to supply power sources in unattended electronic devices, wireless sensor nodes, micro-electronic devices, etc., since it has higher energy conversion efficiency and a simple structure. Up to now, various technologies, such as advanced materials, micro- and macro-mechanics, and electric circuit design, have been investigated and emerged to improve performance and conversion efficiency of the piezoelectric energy harvesters. In this paper, we focus on recent progress of piezoelectric energy harvesting technologies based on PbZrxTi1-xO3 (PZT materials, which have the most outstanding piezoelectric properties. The advanced piezoelectric energy harvesting technologies included materials, fabrications, unique designs, and properties are introduced to understand current technical levels and suggest the future directions of piezoelectric energy harvesting.

MACCIS 2.0 - An Architecture Description Framework for Technical Infostructures and Their Enterprise Environment

National Research Council Canada - National Science Library

Elvesaeter, Brian; Neple, Tor; Aagedal, Jan O; Rolfsen, Rolf K; Stensli, Ole-Oevind

2004-01-01

This paper presents the MACCIS 2.0 framework. MACCIS is an architecture description framework that defines architectural artefacts that are used to describe technical information infrastructures (infostructures...

Evaluating non-technical skills and mission essential competencies of pilots in military aviation environments.

Science.gov (United States)

Tsifetakis, Emmanuel; Kontogiannis, Tom

2017-05-25

To develop and validate a classification of non-technical skills (NTS) in military aviation, a study was conducted, using data from real operations of F16 aircraft formations. Phase 1 developed a NTS classification based on the literature review (e.g. NOTECHS) and a workshop with pilots. The Non-TEChnical-MILitary-Skills (NOTEMILS) scheme was tested in Phase 2 in a series of Principal Component Analysis with data from After-Action-Review sessions (i.e. 900 records from a wide range of operations). The NTS were found to make a good prediction of Mission Essential Components (R 2  > 0.80) above the effect of experience. Phase 3 undertook a reliability analysis where three raters assessed the NOTEMILS scheme with good results (i.e. all r wg  > 0.80). To look into the consistency of classifications, another test indicated that, at least, two out of three raters were in agreement in over 70% of the assessed flight segments. Practitioner Summary: A classification scheme of Non-Technical Skills (NTS) was developed and tested for reliability in military aviation operations. The NTS scheme is a valuable tool for assessing individual and team skills of F-16 pilots in combat. It is noteworthy that the tool had a good capability of predicting Mission Essential Competencies.

Controlling networking multimedia appliances: with an open environment - a plan-based approach

OpenAIRE

Jantz, D.; Heider, T.