Environment, health and safety progress report 1997

International Nuclear Information System (INIS)

1998-01-01

Imperial Oil is Canada's largest producer of crude oil and a major producer of natural gas. It is also the largest refiner and marketer of petroleum products, sold mainly under the Esso brand. Imperial Oil, in participation with Syncrude Canada, is also a major developer of the oil sands reserves in Cold Lake, Alberta. This review of environmental and health and safety performance in 1997 highlights the Company's comprehensive approach to risk management to reduce risk to safety, health and the environment. It is noted that in 1997, the Company's employee and contractor safety performance continued to be among the best in the industry. Potentially hazardous incidents decreased as a consequence of Imperial Oil's more stringent health and safety management system. Environmental compliance notifications fell by more than half in 1997. During the year there was a slight increase in hazardous wastes, due to the loss of outlets for recycling some materials. The National Pollutants Release Inventory indicates that Imperial has reduced emissions and offsite transfers by 25 per cent since 1993. Volatile organic compounds have been reduced by 60 per cent since 1993. According to the report all Imperial Oil facilities operate well within the guidelines for sulphur dioxide emissions. 1 tab., 10 figs

Occupational health and environment research 1983: Health, Safety, and Environment Division. Progress report

International Nuclear Information System (INIS)

Voelz, G.L.

1985-05-01

The primary responsibility of the Health, Safety, and Environment (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environmental protection. These activities are designed to protect the workers, the public, and the environment. Evaluation of respiratory protective equipment included the XM-30 and M17A1 military masks, use of MAG-1 spectacles in respirators, and eight self-contained units. The latter units were used in an evaluation of test procedures used for Bureau of Mines approval of breathing apparatuses. Analyses of air samples from field studies of a modified in situ oil shale retorting facility were performed for total cyclohexane extractables and selected polynuclear aromatic hydrocarbons. Aerosols generation and characterization of effluents from oil shale processing were continued as part of an inhalation toxicology study. Additional data on plutonium excretion in urine are presented and point up problems in using the Langham equation to predict plutonium deposition in the body from long-term excretion data. Environmental surveillance at Los Alamos during 1983 showed the highest estimated radiation dose from Laboratory operations to be about 26% of the natural background radiation dose. Several studies on radionuclides and their transport in the Los Alamos environment are described. The chemical quality of surface and ground water near the geothermal hot dry rock facility is described. Short- and long-term consequences to man from releases of radionuclides into the environment can be simulated by the BIOTRAN computer model, which is discussed brirfly

48 CFR 970.5223-1 - Integration of environment, safety, and health into work planning and execution.

Science.gov (United States)

2010-10-01

..., safety, and health into work planning and execution. 970.5223-1 Section 970.5223-1 Federal Acquisition... Integration of environment, safety, and health into work planning and execution. As prescribed in 970.2303-3(b), insert the following clause: Integration of Environment, Safety, and Health Into Work Planning and...

Introduction to good practice in health, environment and safety management in enterprises

NARCIS (Netherlands)

Baranski, B.; Zwetsloot, G.

2000-01-01

Purpose of this paper, presented on the fifth annual meeting of the Baltic Sea Network on Occupational Health and Safety (Berlin, 18-19 November 1999), is to outline conceptual models of good practice (GP) in Health, Environment and Safety Management in Enterprises (HESME), present major components

Institute for Environment, Health and Safety

International Nuclear Information System (INIS)

Loos, M.

2007-01-01

The article describes the key activities of the Institute for Environment, Health and Safety of the Belgian Nuclear Research Centre SCK-CEN. Through the performance of experiments, the development of models and the integration of human sciences in our R and D, propose new durable methods, computer codes and measuring instruments for radiation protection, management and disposal of radioactive waste and dismantling of nuclear installations. These developments belong to the disciplines environmental chemistry, radiobiology and radioecology and include the transfer of radio nuclides in the geosphere and biosphere, as also the behaviour of micro-organisms in space

Management of health, safety and environment in process industry

DEFF Research Database (Denmark)

Duijm, Nijs Jan; Fiévez, C.; Gerbec, M.

2008-01-01

The present status of industrial HSE management in a number of EU member states is reviewed, with a focus on the integration of health, safety and environment in single management systems. The review provides insight into the standards and paradigms adopted by industry, and it identifies trends...

Environment, Safety, and Health Self-Assessment Report, Fiscal Year 2008

Energy Technology Data Exchange (ETDEWEB)

Chernowski, John

2009-02-27

Lawrence Berkeley National Laboratory's Environment, Safety, and Health (ES&H) Self-Assessment Program ensures that Integrated Safety Management (ISM) is implemented institutionally and by all divisions. The Self-Assessment Program, managed by the Office of Contract Assurance (OCA), provides for an internal evaluation of all ES&H programs and systems at LBNL. The functions of the program are to ensure that work is conducted safely, and with minimal negative impact to workers, the public, and the environment. The Self-Assessment Program is also the mechanism used to institute continuous improvements to the Laboratory's ES&H programs. The program is described in LBNL/PUB 5344, Environment, Safety, and Health Self-Assessment Program and is composed of four distinct assessments: the Division Self-Assessment, the Management of Environment, Safety, and Health (MESH) review, ES&H Technical Assurance, and the Appendix B Self-Assessment. The Division Self-Assessment uses the five core functions and seven guiding principles of ISM as the basis of evaluation. Metrics are created to measure performance in fulfilling ISM core functions and guiding principles, as well as promoting compliance with applicable regulations. The five core functions of ISM are as follows: (1) Define the Scope of Work; (2) Identify and Analyze Hazards; (3) Control the Hazards; (4) Perform the Work; and (5) Feedback and Improvement. The seven guiding principles of ISM are as follows: (1) Line Management Responsibility for ES&H; (2) Clear Roles and Responsibilities; (3) Competence Commensurate with Responsibilities; (4) Balanced Priorities; (5) Identification of ES&H Standards and Requirements; (6) Hazard Controls Tailored to the Work Performed; and (7) Operations Authorization. Performance indicators are developed by consensus with OCA, representatives from each division, and Environment, Health, and Safety (EH&S) Division program managers. Line management of each division performs the

30 CFR 250.107 - What must I do to protect health, safety, property, and the environment?

Science.gov (United States)

2010-07-01

..., property, and the environment? 250.107 Section 250.107 Mineral Resources MINERALS MANAGEMENT SERVICE... Performance Standards § 250.107 What must I do to protect health, safety, property, and the environment? (a) You must protect health, safety, property, and the environment by: (1) Performing all operations in a...

PERCEPTION OF BUILDING CONSTRUCTION WORKERS TOWARDS SAFETY, HEALTH AND ENVIRONMENT

Directory of Open Access Journals (Sweden)

C.R. CHE HASSAN

2007-12-01

Full Text Available The construction industry is known as one of the most hazardous activities. Therefore, safety on the job site is an important aspect with respect to the overall safety in construction. This paper assesses the safety level perception of the construction building workers towards safety, health and environment on a construction job site in Kuala Lumpur, Malaysia. The above study was carried out by choosing 5 selected large building construction projects and 5 small building construction projects respectively in and around Kuala Lumpur area. In the present study, an exhaustive survey was carried out in these 10 project site areas using a standard checklist and a detailed developed questionnaire. The checklist comprised 17 divisions of safety measurements which are considered and perceived to be important from the safety point of view and was assessed based on the score obtained. The questionnaire comprised the general information with 36 safety attitude statements on a 1-5 Likert scale which was distributed to 100 construction workers. The results of the checklist show the difference of safety levels between the large and small projects. The study revealed that the large projects shown a high and consistent level in safety while the small projects shown a low and varied safety levels. The relationship between the factors can be obtained from the questionnaire. They are organizational commitment, factor influencing communication among workmates, worker related factors, personal role and supervisors’ role factors, obstacles to safety and safe behavior factors and management commitment at all levels in line with the management structure and risk taking behavioral factors. The findings of the present study revealed invaluable indications to the construction managers especially in improving the construction workers’ attitude towards safety, health and environment and hence good safety culture in the building construction industries.

Environment, safety and health progress assessment manual

International Nuclear Information System (INIS)

1992-12-01

On June 27, 1989, the Secretary of Energy announced a 10-Point Initiative to strengthen environment, safety, and health (ES ampersand H) programs, and waste management activities at DOE production, research, and testing facilities. One of the points involved conducting dent Tiger Team Assessments of DOE operating facilities. The Office of Special independent Projects (OSP), EH-5, in the Office of the Assistant Secretary for Environment, Safety and Health, EH-1, was assigned the responsibility to conduct the Tiger Team Assessments. Through June 1992, a total of 35 Tiger Team Assessments were completed. The Secretary directed that Corrective Action Plans be developed and implemented to address the concerns identified by the Tiger Teams. In March 1991, the Secretary approved a plan for assessments that are ''more focused, concentrating on ES ampersand H management, ES ampersand H corrective actions, self-assessment programs, and root-cause related issues.'' In July 1991, the Secretary approved the initiation of ES ampersand H Progress Assessments, as a followup to the Tiger Team Assessments, and in the continuing effort to institutionalize the self-assessment process and line management accountability in the ES ampersand H areas. This manual documents the processes to be used to perform the ES ampersand H Progress Assessments. It was developed based upon the lessons learned from Tiger Team Assessments, the two pilot Progress Assessments, and Progress Assessments that have been completed. The manual will be updated periodically to reflect lessons learned or changes in policy

Health, safety and environment : annual report 2000

International Nuclear Information System (INIS)

2000-01-01

A natural gas transmission and power services company, TransCanada Pipelines Limited operates approximately 38,000 kilometers of pipeline, thereby supplying the majority of natural gas production facilities in Western Canada. The company is also involved in the power generation industry by building, operating and owning interests in electric power plants. Located in Rhode Island, United States, the largest plant operated by TransCanada is a combined-cycle plant that generates in excess of 500 MW. TransCanada is committed to its health, safety and environment management system. The system is modeled after the elements of the International Organization for Standardization (ISO) 14001 which sets the standard for environmental management systems. Considerable efforts were expanded to implement programs and initiatives to protect the environment, such as the pipeline reclamation criteria, the hazardous materials and waste management, and proposed polychlorinated biphenyl (PCB) regulations, which are currently under consideration by Environment Canada. TransCanada PipeLines Limited has also set up an environmental research program to enable management and workers to minimize the environmental impacts of the business. Its objectives are the enhancement of the health and safety of employees and their communities, the mitigation of effects on lands, air and water. The topics covered by the research are: vegetation and wildlife with several sub-categories. The company is concerned about the effects on climate change, and developed plans and strategies to manage the emissions of greenhouse gases. In the process, it was awarded several awards for its commitment, action and leadership on voluntary reduction program of greenhouse gases. Full-time resources are dedicated to illness prevention and health promotion, employee assistance programs, short and long term disability management and others. During the year 2000, TransCanada invested 4 million dollars in communities

48 CFR 952.223-71 - Integration of environment, safety, and health into work planning and execution.

Science.gov (United States)

2010-10-01

..., safety, and health into work planning and execution. 952.223-71 Section 952.223-71 Federal Acquisition... Provisions and Clauses 952.223-71 Integration of environment, safety, and health into work planning and... safety and health standards applicable to the work conditions of contractor and subcontractor employees...

Representation a Framwork for Contractors Selection Via of Health, Safety and Environment

Directory of Open Access Journals (Sweden)

Shahram Mahmoudi

2016-12-01

Full Text Available Introduction: Quality and efficiency of health, safety, and environment (HSE management systems play a vital role in achieving their goals. Considering outputs and objective achievement make continuous improvement of services and products, internal and external customer satisfaction, adopting a systematic way for performing various tasks, system performance and analysis very important. The present study was conducted to construct a proper framework for assessing MAPNA group contractors in terms of their health, safety, and environment performance.  . Method: In the first step of the study, all documents and literature associated with performance assessment were reviewed. In the second step, using a focus group approach, a basic model for assessing HSE management system was designed. Lastly, the framework was tested and credited on three major contractors of MAPNA group. Results: The proposed framework was composed of five criteria. The main criteria was the pattern of HSE process implementation which had seven sub-criteria and 120 guiding hints. Moreover, the five criteria were able to assess the organizational capabilities in terms of health, safety, and environment management.. Conclusion: The proposed framework make contractors able to promote their HSE performances by identifying organizational strong and weak points, prioritizing improvement projects, and also monitoring the pace of improvement in achieving organizational excellence..

75 FR 73946 - Worker Safety and Health Program: Safety Conscious Work Environment

Science.gov (United States)

2010-11-30

... Environment AGENCY: Office of the General Counsel, Department of Energy (DOE). ACTION: Notice of denial of... Nuclear Regulatory Commission's ``Safety-Conscious Work Environment'' guidelines as a model. DOE published.... Second, not only would instituting a ``Safety-Conscious Work Environment'' by regulation be redundant...

The pursuit of health, safety and environment objectives

International Nuclear Information System (INIS)

Armstrong, K.

1994-01-01

The conference paper examines certain issues facing E and P companies with respect to health, safety and environment (HSE) management and costs. It reviews some of the pressures forcing companies to increase their HSE cost reductions. It discusses the critical role that risk management plays in efforts to resolve these competing pressures so as to best protect shareholder value, and it identifies some areas for potential improvement. Finally, it examines the contribution industry partnerships with government can make in promoting cost-effective HSE risk management. 8 refs

The pursuit of health, safety and environment objectives

Energy Technology Data Exchange (ETDEWEB)

Armstrong, K [Chevron Overseas Petroleum, Inc. (United States)

1994-12-31

The conference paper examines certain issues facing E and P companies with respect to health, safety and environment (HSE) management and costs. It reviews some of the pressures forcing companies to increase their HSE cost reductions. It discusses the critical role that risk management plays in efforts to resolve these competing pressures so as to best protect shareholder value, and it identifies some areas for potential improvement. Finally, it examines the contribution industry partnerships with government can make in promoting cost-effective HSE risk management. 8 refs.

ICT support safety, health and environment management system (e-SHEMS)

International Nuclear Information System (INIS)

Amy Hamijah Ab Hamid; Hasfazilah Hassan; Siti Massari Amran; Norzalina Nasirudin; Azimawati Ahmad; Mohd Suhaimi Kassim; Shaharum Ramli; Musa Ibrahim; Mohd Sidek Othman

2009-01-01

Safety program is compulsory for a nuclear technology related research and development institution like Nuclear Malaysia. It has been implemented in various safety standard systems including Act 514, Act 304, ISO 14000, OSHAS 18001 and IAEA. This paper began with Nuclear Malaysia history in initiating our own safety standard system since 1982. Currently, Nuclear Malaysia's Safety Health and Environment Management System (SHE-MS) was stipulated for similar purpose. Furthermore, it has implemented guidelines by AELB, IAEA, DOSH, Fire Brigade and Police Force. This paper briefly describes the overall structure of SHE-MS, how it functions and being managed, and lessons learned. The findings which are based on the issues and challenges, then it can be analysed to propose a development of SHE-MS ICT-support application for future improvement and enhancement in inculcating and nurturing safety culture among Nuclear Malaysia staff. (Author)

Pacific Northwest Laboratory annual report for 1987 to the Assistant Secretary for Environment, Safety, and Health: Part 5: Environment, safety, health, and quality assurance

International Nuclear Information System (INIS)

Faust, L.G.; Steelman, B.L.; Selby, J.M.

1988-02-01

Part 5 of the 1987 Annual Report to the US Department of Energy's Assistant Secretary for Environment, Safety, and Health presents Pacific Northwest Laboratory's progress on work performed for the Office of Nuclear Safety, the Office of Environmental Guidance and Compliance, the Office of Environmental Audit, and the Office of National Environmental Policy Act Project Assistance. For each project, as identified by the Field Work Proposal, articles describe progress made during fiscal year 1987. Authors of these articles represent a broad spectrum of capabilities derived from five of the seven technical centers of the Laboratory, reflecting the interdisciplinary nature of the work

Pacific Northwest Laboratory annual report for 1989 to the Assistant Secretary for Environment, Safety, and Health - Part 5: Environment, Safety, Health, and Quality Assurance

Energy Technology Data Exchange (ETDEWEB)

Faust, L.G.; Doctor, P.G.; Selby, J.M.

1990-04-01

Part 5 of the 1989 Annual Report to the US Department of Energy's Assistant Secretary for Environment, Safety, and Health presents Pacific Northwest Laboratory's progress on work performed for the Office of Environmental Guidance and Compliance, the Office of Environmental Audit, the Office of National Environmental Policy Act Project Assistance, the Office of Nuclear Safety, the Office of Safety Compliance, and the Office of Policy and Standards. For each project, as identified by the Field Work Proposal, there is an article describing progress made during fiscal year 1989. Authors of these articles represent a broad spectrum of capabilities derived from five of the seven technical centers of the Laboratory, reflecting the interdisciplinary nature of the work. 35 refs., 1 fig.

Design and implementation of a safety health and environment management system in BHP Petroleum

Energy Technology Data Exchange (ETDEWEB)

Mattes, B.W.; Walters, C. [BHP Petroleum, Melbourne, VIC (Australia)

1995-12-31

The Australian/Asian operations group within BHP Petroleum (BHPP) is implementing and integrated management system with safety, occupational health and environmental elements as crucial components of all BHPP operations. Responsibility for the development, implementation and maintenance of the management system, and compliance with its provisions, rests with line management, a logical extension of the accountability and responsibility for safety, health and environment matters that rests with line managers within BHPP. Contractors are scrutinized to assess their safety, health and environmental performance and failure to meet minimal standards will result in their disqualification. The effectiveness of the BHPP Management System is yet to be fully determined, however, it will be measured against the performance of the company in the areas of zero lost time due to injuries, a drop in incidences requiring medical treatment or first aid, lower absenteeism and workers compensation bills, no oil spills, less car accidents, less back pain and RSI, better management of waste emissions to air, land and sea, and less equipment breakdowns. The trend in improved safety, health and environment performance are already apparent and auger well for the Company as it moves towards the new millennium. 7 figs., 2 photos., 4 refs.

Influence of indoor work environments on health, safety, and human rights among migrant sex workers at the Guatemala-Mexico Border: a call for occupational health and safety interventions.

Science.gov (United States)

Goldenberg, Shira M; Rocha Jiménez, Teresita; Brouwer, Kimberly C; Morales Miranda, Sonia; Silverman, Jay G

2018-02-02

Migrant women are over-represented in the sex industry, and migrant sex workers experience disproportionate health inequities, including those related to health access, HIV and sexually transmitted infections (STIs), and violence. Despite calls for occupational sex work interventions situated in labour rights frameworks, there remains a paucity of evidence pertaining to migrant sex workers' needs and realities, particularly within Mexico and Central America. This study investigated migrant sex workers' narratives regarding the ways in which structural features of work environments shape vulnerability and agency related to HIV/STI prevention and violence at the Guatemala-Mexico border. Drawing on theoretical perspectives on risk environments and structural determinants of HIV in sex work, we analyzed in-depth interviews, focus groups, and ethnographic fieldwork conducted with 39 migrant sex workers in indoor work environments between 2012 and 2015 in Tecún Umán, Guatemala. Participant narratives revealed the following intersecting themes to be most closely linked to safety and agency to engage in HIV/STI prevention: physical features of indoor work environments (e.g., physical layout of venue, proximity to peers and third parties); social norms and practices for alcohol use within the workplace; the existence and nature of management practices and policies on health and safety practices; and economic influences relating to control over earnings and clients. Across work environments, health and safety were greatly shaped by human rights concerns stemming from workplace interactions with police, immigration authorities, and health authorities. Physical isolation, establishment norms promoting alcohol use, restricted economic agency, and human rights violations related to sex work policies and immigration enforcement were found to exacerbate risks. However, some establishment policies and practices promoted 'enabling environments' for health and safety, supporting

Pesticide Health and Safety Information

Science.gov (United States)

Animal Health Safe Use Practices Pest Control Food Safety Low Risk Pesticides Integrated Pest Management directed by the product label. Pesticides may be ingested if stored improperly in food or beverage ; Environment Human Health Animal Health Safe Use Practices Food Safety Environment Air Water Soil Wildlife

Protection of environment, health and safety using risk management

Energy Technology Data Exchange (ETDEWEB)

Abraham, G [Ghafari Associates, Inc. 17101 Michegan Avenue Dearborn, MI 48126-2736 (United States); Kummler, R H [Department of Chemical engineering Wayne Stae University Detroit, MI 48202 (United States); louvar, J [Research Services Basf Corporation Wyandotte, MI 48192 (United States)

1997-12-31

Section 304 of the 1990 clean air amendments (CAAA) directed the US occupational safety and health administration (OSFA) to develop a chemical process safety standard to protect workers on-site from accidents involving hazardous substances. OSHA issued 29 CFR 1910.119, process safety management of Highly hazardous chemicals (PSM) in 1992. Section 112 r of the CAAA further mandated that a standard be developed to protect the environment from accidental releases of hazardous substances. The US environmental protection agency (EPA) proposed such a standard in 1993 (58 Fr 54190) and revised their proposal in 1995). The final rule for risk management and accidental release prevention is more comprehensive and extensive than OSHA`s PSM standard. In this paper we will discuss the concepts of both programs, the classes of substances that would trigger a facility`s need for compliance and review the regulations for risk management.

Protection of environment, health and safety using risk management

International Nuclear Information System (INIS)

Abraham, G.; Kummler, R.H.; louvar, J.

1996-01-01

Section 304 of the 1990 clean air amendments (CAAA) directed the US occupational safety and health administration (OSFA) to develop a chemical process safety standard to protect workers on-site from accidents involving hazardous substances. OSHA issued 29 CFR 1910.119, process safety management of Highly hazardous chemicals (PSM) in 1992. Section 112 r of the CAAA further mandated that a standard be developed to protect the environment from accidental releases of hazardous substances. The US environmental protection agency (EPA) proposed such a standard in 1993 (58 Fr 54190) and revised their proposal in 1995). The final rule for risk management and accidental release prevention is more comprehensive and extensive than OSHA's PSM standard. In this paper we will discuss the concepts of both programs, the classes of substances that would trigger a facility's need for compliance and review the regulations for risk management

Food Labeling and Consumer Associations with Health, Safety, and Environment.

Science.gov (United States)

Sax, Joanna K; Doran, Neal

2016-12-01

The food supply is complicated and consumers are increasingly calling for labeling on food to be more informative. In particular, consumers are asking for the labeling of food derived from genetically modified organisms (GMO) based on health, safety, and environmental concerns. At issue is whether the labels that are sought would accurately provide the information desired. The present study examined consumer (n = 181) perceptions of health, safety and the environment for foods labeled organic, natural, fat free or low fat, GMO, or non-GMO. Findings indicated that respondents consistently believed that foods labeled GMO are less healthy, safe and environmentally-friendly compared to all other labels (ps labels mean something to consumers, but that a disconnect may exist between the meaning associated with the label and the scientific consensus for GMO food. These findings may provide insight for the development of labels that provide information that consumers seek.

Environment, Safety and Health Progress Assessment of the Hanford Site

International Nuclear Information System (INIS)

1992-05-01

This report documents the result of the US Department of Energy (DOE) Environment, Safety and Health (ES ampersand H) Progress Assessment of the Hanford Site, in Richland, Washington. The assessment, which was conducted from May 11 through May 22, 1992, included a selective-review of the ES ampersand H management systems and programs of the responsible DOE Headquarters Program Offices the DOE Richland Field Office, and the site contractors. The ES ampersand H Progress Assessments are part of the Secretary of Energy's continuing effort to institutionalize line management accountability and the self-assessment process throughout DOE and its contractor organizations. The purpose of the Hanford Site ES ampersand H Progress Assessment is to provide the Secretary with an independent assessment of the adequacy and effectiveness of the DOE and contractor management structures, resources, and systems to address ES ampersand H problems and requirements. They are not intended to be comprehensive compliance assessments of ES ampersand H activities. The point of reference for assessing programs at the Hanford Site was, for the most part, the Tiger Team Assessment of the Hanford Site, which was conducted from May 21 through July 18, 1990. A summary of issues and progress in the areas of environment, safety and health, and management is included

Public health safety and environment in inadequate hospital and healthcare settings: a review.

Science.gov (United States)

Baguma, D

2017-03-01

Public health safety and environmental management are concerns that pose challenges worldwide. This paper briefly assesses a selected impact of the environment on public health. The study used an assessment of environmental mechanism to analyse the underlying different pathways in which the health sector is affected in inadequate hospital and health care settings. We reviewed the limited available evidence of the association between the health sector and the environment, and the likely pathways through which the environment influences health. The paper also models the use of private health care as a function of costs and benefits relative to public care and no care. The need to enhancing policies to improve the administration of health services, strengthening interventions on environment using international agreements, like Rio Conventions, including measures to control hospital-related infection, planning for human resources and infrastructure construction development have linkage to improve environment care and public health. The present study findings partly also demonstrate the influence of demand for health on the environment. The list of possible interventions includes enhancing policies to improve the administration of health services, strengthening Rio Conventions implementation on environmental concerns, control of environmental hazards and public health. Copyright © 2016 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

US Department of Energy Environment, Safety and Health Progress Assessment of the Nevada Test Site

Energy Technology Data Exchange (ETDEWEB)

1992-08-01

This report documents the result of the US Department of Energy (DOE) Environment, Safety, and Health (ES&H) Progress Assessment of the Nevada Test Site (NTS), Nye County, Nevada. The assessment, which was conducted from July 20 through August 4, 1992, included a selective review of the ES&H management systems and progress of the responsible DOE Headquarters Program Offices; the DOE Nevada Field Office (NV); and the site contractors. The ES&H Progress Assessments are part of the Secretary of Energy`s continuing effort to institutionalize line management accountability and the self-assessment process throughout DOE and its contractor organizations. This report presents a summary of issues and progress in the areas of environment, safety and health, and management.

US Department of Energy Environment, Safety and Health Progress Assessment of the Nevada Test Site

International Nuclear Information System (INIS)

1992-08-01

This report documents the result of the US Department of Energy (DOE) Environment, Safety, and Health (ES ampersand H) Progress Assessment of the Nevada Test Site (NTS), Nye County, Nevada. The assessment, which was conducted from July 20 through August 4, 1992, included a selective review of the ES ampersand H management systems and progress of the responsible DOE Headquarters Program Offices; the DOE Nevada Field Office (NV); and the site contractors. The ES ampersand H Progress Assessments are part of the Secretary of Energy's continuing effort to institutionalize line management accountability and the self-assessment process throughout DOE and its contractor organizations. This report presents a summary of issues and progress in the areas of environment, safety and health, and management

Exploring health, safety and environment in central and Eastern Europe: an introduction to the European Centre for Occupational Health, Safety and the Environment (ECOHSE).

Science.gov (United States)

Beck, M; Robson, M; Watterson, A; Woolfson, C

2001-01-01

This article traces the development of the European Centre for Occupational Health, Safety and the Environment (ECOHSE) at the University of Glasgow. ECOHSE recently has been designated a Thematic Network by the European Union which is providing administrative support through 2004. The de facto de-regulation that accompanied emergent capitalism in Eastern Europe created opportunities for exploitation of the work force. Voluntary efforts of a loose network of occupational and environmental health academics led to a series of yearly conferences to discuss these problems and the lack of research about them. Then, in 1999, a more formal organization was established at Glasgow to pursue continuity and funding. The first occupational and environmental health conference under ECOHSE was held last year in Lithuania, and selected presentations of that meeting are offered in this journal. A second ECOHSE conference will be held this fall in Romania.

The effect of Health, Safety and Environment Management System (HSE-MS on the improvement of safety performance indices in Urea and Ammonia Kermanshah Petrochemical Company

Directory of Open Access Journals (Sweden)

M. S. Poursoleiman

2015-09-01

.Conclusion: The implementation of Health, Safety and the Environment Management System caused a reduction in accidents and its consequences and most of the safety performance indices in the entire process cycle of Kermanshah Petrochemical Company. Overall, safety condition has been improved considerably.

Electronic Informational and Educational Environment as a Factor of Competence-Oriented Higher Pedagogical Education in the Sphere of Health, Safety and Environment

Science.gov (United States)

Kamerilova, Galina S.; Kartavykh, Marina A.; Ageeva, Elena L.; Veryaskina, Marina A.; Ruban, Elena M.

2016-01-01

The authors consider the question of computerisation in health, safety and environment teachers' training in the context of the general approaches and requirements of the Federal National Standard of Higher Education, which is realised through designing of electronic informational and educational environment. The researchers argue indispensability…

Occupational health and environment research 1984: Health, Safety, and environmental Division. Progress report

International Nuclear Information System (INIS)

Voelz, G.L.

1986-05-01

The primary responsibility of the Health, Safety, and Environment (HSE) Division is to provide comprehensive occupational health and safety programs, waste processing, and environment protection. Two supplied-air suits tested for their functional protection were considered to be unacceptable because of low fit factors. Respiratory protective equipment testing for the uS Air Force, Navy, and Army was performed during 1984. The laser aerosol spectrometer (LAS-X) has been shown to operate successfully for measuring and sizing aerosols used for quality assurance testing of high-efficiency particulate air filters used at DOE facilities. Radioanalyses for 239 Pu and 241 Am are presented for the complete skeletal parts of two persons. Air samples from work areas in a coal gasification plant in Yugoslavia show minimal concentration of organic vapors, amines, polynuclear aromatic hydrocarbons, and phenols. Aerosol characteristics of oil shale vapors and manmade vitreous fibers used in ongoing inhalation toxicology studies are presented. Epidemiologic studies of smoking patterns among Los Alamos employees reveal 24.3% smokers compared with the US rate of 32.5%. Environmental surveillance at Los Alamos during 1984 showed the highest estimated radiation dose to an individual at or outside the Laboratory boundary to be about 25% of the natural background radiation dose. Surveillance studies on water and sediment transport of radionuclides, depleted uranium, and silver are described. Bibliographic review of the rooting depth of native plants indicates that even many grass species will root to depths greater than the earth overburden depths to cover low-level radioactive waste sites

Urban green spaces assessment approach to health, safety and environment

Directory of Open Access Journals (Sweden)

B. Akbari Neisiani

2016-04-01

Full Text Available The city is alive with dynamic systems, where parks and urban green spaces have high strategic importance which help to improve living conditions. Urban parks are used as visual landscape with so many benefits such as reducing stress, reducing air pollution and producing oxygen, creating opportunities for people to participate in physical activities, optimal environment for children and decreasing noise pollution. The importance of parks is such extent that are discussed as an indicator of urban development. Hereupon the design and maintenance of urban green spaces requires integrated management system based on international standards of health, safety and the environment. In this study, Nezami Ganjavi Park (District 6 of Tehran with the approach to integrated management systems have been analyzed. In order to identify the status of the park in terms of the requirements of the management system based on previous studies and all Tehran Municipality’s considerations, a check list has been prepared and completed by park survey and interview with green space experts. The results showed that the utility of health indicators were 92.33 % (the highest and environmental and safety indicators were 72 %, 84 % respectively. According to SWOT analysis in Nezami Ganjavi Park some of strength points are fire extinguishers, first aid box, annual testing of drinking water and important weakness is using unseparated trash bins also as an opportunities, there are some interesting factors for children and parents to spend free times. Finally, the most important threat is unsuitable park facilities for disabled.

The effect of Health, Safety and Environment Management System (HSE-MS on the improvement of safety performance indices in Urea and Ammonia Kermanshah Petrochemical Company

Directory of Open Access Journals (Sweden)

M. S. Poursoleiman

2015-09-01

Full Text Available Introduction: Work-related accidents may cause damage to people, environment and lead to waste of time and money. Health, Safety and Environment Management System has been developed in order to reduce accidents. This study aimed to investigate the effect of implementation of this system on reduction of the accidents and its consequences and also on the safety performance indices in Kermanshah Petrochemical Company. Material and Method: In this study, records of accidents were collected by OSHA incident report form 301 over 4 years. Following, the mean annual accidents and its consequences and safety performance indices were calculated and reported. Then, using statistical analysis, the impacts of two years implementation of this system on the accidents and its consequences and safety performance indices were evaluated. Result: The results showed that the implementation of HSE system was significantly correlated with Frequency Severity Indicator, Accident Severity Rate, lost days, minor accidents and total incidents (P-value 0.05. Conclusion: The implementation of Health, Safety and the Environment Management System caused a reduction in accidents and its consequences and most of the safety performance indices in the entire process cycle of Kermanshah Petrochemical Company. Overall, safety condition has been improved considerably.

Eighth ITER technical meeting on safety and environment

International Nuclear Information System (INIS)

Gordon, C.; Raeder, J.

2000-01-01

From November 27 to 30, 2000 the Eighth ITER Technical Meeting on Safety and Environment was held by the ITER Joint Central Team (JCT) at the Garching Joint Work Site, which also hosts the ITER Safety, Environment and Health Group (SEHG). At this meeting, safety experts from the Home Teams (HT) worked together with the SEHG members towards the following main objectives: review of Generic Site Safety Report (GSSR) results and drafts; review of the Plant Design Description (PDD) summary of safety; update on the status of the R and D tasks contributing to GSSR

Occupational Safety and Health Program at the West Valley Demonstration Project

International Nuclear Information System (INIS)

L. M. Calderon

1999-01-01

The West Valley Nuclear Services Co. LLC (WVNS) is committed to provide a safe, clean, working environment for employees, and to implement U.S. Department of Energy (DOE) requirements affecting worker safety. The West Valley Demonstration Project (WVDP) Occupational Safety and Health Program is designed to protect the safety, health, and well-being of WVDP employees by identifying, evaluating, and controlling biological, chemical, and physical hazards in the work place. Hazards are controlled within the requirements set forth in the reference section at the end of this report. It is the intent of the WVDP Occupational Safety and Health Program to assure that each employee is provided with a safe and healthy work environment. This report shows the logical path toward ensuring employee safety in planning work at the WVDP. In general, planning work to be performed safely includes: combining requirements from specific programs such as occupational safety, industrial hygiene, radiological control, nuclear safety, fire safety, environmental protection, etc.; including WVDP employees in the safety decision-making processes; pre-planning using safety support re-sources; and integrating the safety processes into the work instructions. Safety management principles help to define the path forward for the WVDP Occupational Safety and Health Program. Roles, responsibilities, and authority of personnel stem from these ideals. WVNS and its subcontractors are guided by the following fundamental safety management principles: ''Protection of the environment, workers, and the public is the highest priority. The safety and well-being of our employees, the public, and the environment must never be compromised in the aggressive pursuit of results and accomplishment of work product. A graded approach to environment, safety, and health in design, construction, operation, maintenance, and deactivation is incorporated to ensure the protection of the workers, the public, and the environment

Environment, safety and health, management and organization compliance assessment, West Valley Demonstration Program, West Valley, New York

International Nuclear Information System (INIS)

1989-08-01

An Environment, Safety and Health ''Tiger Team'' Assessment was conducted at the West Valley Demonstration Project. The Tiger Team was chartered to conduct an onsite, independent assessment of WVDP's environment, safety and health (ES ampersand H) programs to assure compliance with applicable Federal and State laws, regulations, and standards, and Department of Energy Orders. The objective is to provide to the Secretary of Energy the following information: current ES ampersand H compliance status of each facility; specific noncompliance items; ''root causes'' for noncompliance items; evaluation of the adequacy of ES ampersand H organization and resources (DOE and contractor) and needed modifications; and where warranted, recommendations for addressing identified problem areas

Report on safety and the environment 1992-93

International Nuclear Information System (INIS)

1993-09-01

The steps taken by AEA Technology to implement high safety and environmental standards and performance levels achieved are summarized. AEA's policy on safety and the environment is stated. The way that safety is organised, how plant safety cases are made, plant operations and safety 1992-93 and decommissioning work at several of AEA's plants are reported. Radiological doses for AEA plants are shown to have fallen since 1990. General industrial and office safety, what is learned from accidents and incidents, how the environment is protected, the occupational health services provided and the emergency arrangements in operation are also mentioned briefly. (UK)

Project CHERISH (Children in Home Environments: Regulation To Improve Safety and Health). Final Report.

Science.gov (United States)

Grubb, Paul Dallas

In 1990, Project CHERISH (Children in Home Environments: Regulation to Increase Safety and Health) enabled the Texas Department of Human Services to implement and evaluate several innovative strategies to strengthen regulation of family day care homes. This report contains descriptions of those strategies, an evaluation of their efficacy, and…

Environment, Safety, Health, and Quality Plan for the Buried Waste Integrated Demonstration Program

International Nuclear Information System (INIS)

Walker, S.

1994-05-01

The Buried Waste Integrated Demonstration (BWID) is a program funded by the US Department of Energy Office of Technology Development. BWID supports the applied research, development, demonstration, testing, and evaluation of a suite of advanced technologies that together form a comprehensive remediation system for the effective and efficient remediation of buried waste. This document describes the Environment, Safety, Health, and Quality requirements for conducting BWID activities at the Idaho National Engineering Laboratory. Topics discussed in this report, as they apply to BWID operations, include Federal, State of Idaho, and Environmental Protection Agency regulations, Health and Safety Plans, Quality Program Plans, Data Quality Objectives, and training and job hazard analysis. Finally, a discussion is given on CERCLA criteria and System and Performance audits as they apply to the BWID Program

Environment, safety, and health regulatory implementation plan

International Nuclear Information System (INIS)

1993-01-01

To identify, document, and maintain the Uranium Mill Tailings Remedial Action (UMTRA) Project's environment, safety, and health (ES ampersand H) regulatory requirements, the US Department of Energy (DOE) UMTRA Project Office tasked the Technical Assistance Contractor (TAC) to develop a regulatory operating envelope for the UMTRA Project. The system selected for managing the UMTRA regulatory operating envelope data bass is based on the Integrated Project Control/Regulatory Compliance System (IPC/RCS) developed by WASTREN, Inc. (WASTREN, 1993). The IPC/RCS is a tool used for identifying regulatory and institutional requirements and indexing them to hardware, personnel, and program systems on a project. The IPC/RCS will be customized for the UMTRA Project surface remedial action and groundwater restoration programs. The purpose of this plan is to establish the process for implementing and maintaining the UMTRA Project's regulatory operating envelope, which involves identifying all applicable regulatory and institutional requirements and determining compliance status. The plan describes how the Project will identify ES ampersand H regulatory requirements, analyze applicability to the UMTRA Project, and evaluate UMTRA Project compliance status

Radiation in the human environment: health effects, safety and acceptability

International Nuclear Information System (INIS)

Gonzalez, A.J.; Anderer, J.

1990-01-01

This paper reports selectively on three other aspects of radiation (used throughout to mean ionizing radiation) in the human environment: the human health effects of radiation, radiation safety policy and practices, and the acceptability of scientifically justified practices involving radiation exposures. Our argument is that the science of radiation biology, the judgemental techniques of radiation safety, and the social domain of radiation acceptability express different types of expertise that should complement - and not conflict with or substitute for - one another. Unfortunately, communication problems have arisen among these three communities and even between the various disciplines represented within a community. These problems have contributed greatly to the misperceptions many people have about radiation and which are frustrating a constructive dialogue on how radiation can be harnessed to benefit mankind. Our analysis seeks to assist those looking for a strategic perspective from which to reflect on their interaction with practices involving radiation exposures. (author)

Permanent Commission for Health and Safety

CERN Multimedia

Association du personnel

2007-01-01

The mandate of the Staff Association's permanent commission for Health and Safety is to examine all aspects of health and safety related to the working environment at CERN. In no way does it wish to be a substitute for the official bodies that are responsible for these matters. The Commission's aim is to formulate remarks on and make proposals about these questions to the relevant bodies and the CERN Management. Its main focus is the safety of the CERN staff but it is also concerned with the safety of the installations and of the CERN environment. The Commission reports to the Staff Council and the Executive Committee of the Staff Association.

Agricultural Health and Safety

Science.gov (United States)

... that occur while living, working, or visiting agricultural work environments (primarily farms) are considered agricultural injuries, whether or ... of Labor's Occupational Safety & Health Administration (OSHA) supports safe and healthful working conditions by setting and enforcing standards and by ...

Occupational Safety and Related Impacts on Health  and the Environment.

Science.gov (United States)

Watterson, Andrew

2016-10-05

The inter-relationship between safety, health and the 'environment' is a complex and at times a relatively neglected topic. In this issue, 'safety' is often viewed by contributors as 'health and safety' and includes occupationally-related ill health as well as injury or harm to employees and the wider public. 'Environment' is also interpreted in the widest sense covering both physical and work environments with upstream work hazards presenting risks to downstream communities. The focus is very much on exploring and where possible addressing the challenges, some old and some facing workers in a range of public and private settings and also at times their nearby communities. The 19 papers in the issue cover public and private sectors, global and very local populations, macro-theoretical perspectives, large epidemiological and some single factory or hospital site small case studies. A number of the papers are just beginning to explore and draw out for the first time the risks from hazards in their part of the world. The methodologies adopted also range from lab-based studies through ergonomic assessments and interventions to therapeutic approaches.

How Productive Is Workplace Health and Safety?

DEFF Research Database (Denmark)

Buhai, I. Sebastian; Cottini, Elena; Westergaard-Nielsen, Niels

2017-01-01

In this paper, we investigate the causal impact of workplace health and safety practices on firm performance, using Danish longitudinal matched employer–employee data merged with unique cross-sectional representative firm survey data on work environment conditions. We estimate standard production...... functions, augmented with workplace environment indicators, addressing both time-invariant and time-varying potentially relevant unobservables in the production process. We find positive and large productivity effects of improved physical dimensions of the health and safety environment, specifically...

Health and safety education for joint occupational health and safety committees

Directory of Open Access Journals (Sweden)

Myriam Mahecha Angulo

2015-09-01

Full Text Available Objective: To build a proposal to develop the educational process in health and safety joint committees aimed at safety and health at work (copasst. Methodology: Qualitative, descriptive study in which an in-depth interview to 32 copasst assets was made. Each interview was transcribed and interpreted by applying check with participants, finding meaningful statements, organizing groups of subjects, exhaustive description and validation with participants. The information was placed in the categories planning, organization, development, evaluation and feedback, emerging the following categories: responsible for processes management; planning, place and frequency of educational sessions; topics; format of sessions; involving/ development of sessions; understanding of the issues; applicability to daily life and work environment; applicability to personal/professional life and to the organization. Results: From emerging categories and according to the conceptual framework on adult health education and health and safety for workers, a participatory methodology for the development of educational processes with copasst was built. Conclusions: According to the statement by the members of the copasst, educational processes in health and safety, as they are developed at present, preclude them from achieving necessary competences to perform its functions, thus they are irrelevant.

Pacific Northwest Laboratory: Annual report for 1986 to the Assistant Secretary for Environment, Safety and Health: Part 5, Nuclear and operational safety

International Nuclear Information System (INIS)

Faust, L.G.; Kennedy, W.E.; Steelman, B.L.; Selby, J.M.

1987-02-01

Part 5 of the 1986 Annual Report to the Department of Energy's Assistant Secretary for Environment, Safety and Health presents Pacific Northwest Laboratory's progress on work performed for the Office of Nuclear Safety, the Office of Operational Safety, and for the Office of Environmental Analysis. For each project, as identified by the Field Task Proposal/Agreement, articles describe progress made during fiscal year 1986. Authors of these articles represent a broad spectrum of capabilities derived from three of the seven research departments of the Laboratory, reflecting the interdisciplinary nature of the work

UMTRA Project: Environment, Safety, and Health Plan

International Nuclear Information System (INIS)

1995-02-01

The US Department of Energy has prepared this UMTRA Project Environment, Safety, and Health (ES and H) Plan to establish the policy, implementing requirements, and guidance for the UMTRA Project. The requirements and guidance identified in this plan are designed to provide technical direction to UMTRA Project contractors to assist in the development and implementation of their ES and H plans and programs for UMTRA Project work activities. Specific requirements set forth in this UMTRA Project ES and H Plan are intended to provide uniformity to the UMTRA Project's ES and H programs for processing sites, disposal sites, and vicinity properties. In all cases, this UMTRA Project ES and H Plan is intended to be consistent with applicable standards and regulations and to provide guidance that is generic in nature and will allow for contractors' evaluation of site or contract-specific ES and H conditions. This plan specifies the basic ES and H requirements applicable to UMTRA Project ES and H programs and delineates responsibilities for carrying out this plan. DOE and contractor ES and H personnel are expected to exercise professional judgment and apply a graded approach when interpreting these guidelines, based on the risk of operations

Seventh ITER technical meeting on safety and environment

International Nuclear Information System (INIS)

Raeder, J.; Gordon, C.

2000-01-01

From February 15 to 18, 2000, the Seventy Technical Meeting on Safety and Environment was held at the Garching Joint Work Site which now hosts the Safety, Environment and Health Group of the ITER Joint Central Team. At this meeting, safety experts from the Home Teams worked with the SEHG members on reviews and agreements on the contents of GSSR and on the tasks and the schedule for the production of GSSR as well as the design information to be used and for the analyses to be done

Ninth ITER technical meeting on safety and environment

International Nuclear Information System (INIS)

Raeder, J.; Gordon, C.

2001-01-01

The ninth ITER Technical Meeting on safety and environment, the last in the course of the ITER Engineering Design Activities (EDA), was held at the ITER Garching Joint Work site, 8 to 10 May 2001. At this Meeting, safety experts from the House Teams worked together with the members of the Safety, Environment and Health Groups (SEHG) of the ITER Joint Central Team (JCT) in the following areas: finalization of the Generic Site Safety report (GSSR) which is considered to be the most important objective of the present work; summary of the safety related R and D work done by the Home Teams for ITER during EDA; review of verification and validation work done on computer codes being applied for Safety and Environment (S and E) analyses; outline of work considered necessary for improving the S and E database, quantifying uncertainties of the code results and preparing the adaptation of ITER to a specific site

Health and Safety First

CERN Document Server

2013-01-01

At CERN, health and safety underpin everything we do. We have strict operational procedures in place, as well as health, safety and environment (HSE) requirements to make our working environment as safe as possible. It’s everyone’s responsibility to follow these procedures and requirements to keep ourselves, and our colleagues, safe. We have a very good safety and operational record at CERN stretching back almost 60 years, but there is never room for complacency.   With this very much in mind, we have developed a robust plan for implementation if something unforeseen goes wrong.  Because however careful we all are, accidents do happen, and the mark of any organisation that aspires to be among the best in the world is how quickly and efficiently it acts when they do. A small team made up of people from several departments at CERN has produced a strategic crisis management plan that we can put into action should a major incident occur.  This plan focuses on...

Technology Development, Evaluation, and Application (TDEA) FY 2001 Progress Report Environment, Safety, and Health (ESH) Division

Energy Technology Data Exchange (ETDEWEB)

L.G. Hoffman; K. Alvar; T. Buhl; E. Foltyn; W. Hansen; B. Erdal; P. Fresquez; D. Lee; B. Reinert

2002-05-01

This progress report presents the results of 11 projects funded ($500K) in FY01 by the Technology Development, Evaluation, and Application (TDEA) Committee of the Environment, Safety, and Health Division (ESH). Five projects fit into the Health Physics discipline, 5 projects are environmental science and one is industrial hygiene/safety. As a result of their TDEA-funded projects, investigators have published sixteen papers in professional journals, proceedings, or Los Alamos reports and presented their work at professional meetings. Supplement funds and in-kind contributions, such as staff time, instrument use, and workspace, were also provided to TDEA-funded projects by organizations external to ESH Divisions.

The effect of occupational health and safety, work environment and discipline on employee performance in a consumer goods company

Science.gov (United States)

Putri, D. O.; Triatmanto, B.; Setiyadi, S.

2018-04-01

Employee performance can be the supporting factor of company performance. However, employee performance can be affected by several factors. Employees can have optimal performance if they feel safe, have good working environment and have discipline. The purposes of this research are to analyze the effect of occupational health and safety, work environment and discipline on the employee performance in PPIC Thermo section in a consumer goods company and to find the dominant variable which primarily affects employee performance. This research was conducted by taking data from 47 respondents. The data were collected using questionnaire. The techniques in data analysis is multiple linear regression with SPSS software. The result shows that occupational health and safety, work environment and discipline are simultaneously significant to the employee performance. Discipline holds the dominant factor which affects employee performance.

Integrated Management System Incorporating Quality Management and Management of Environment, Health and Occupational Safety

International Nuclear Information System (INIS)

Manchev, B.; Nenkova, B.; Tomov, E.

2012-01-01

Risk Engineering Ltd is a Bulgarian private company founded in 1990 to provide engineering and consulting services applicable to each and every field of the energy sector. Since its establishment Risk Engineering Ltd develops, implement and apply a System for quality assurance, certified for the first time by BVQI (now Bureau Veritas Certification) in 1999 for conformity with the standard ISO 9001:1994. Later on, in connection with the revision of the standards of ISO 9000 series and introduction of the standard ISO 9001:2000 a Quality Management System in conformity with the standard ISO 9001:2000 was developed, introduced and certified. At present, Risk Engineering Ltd has got developed, documented, introduced and certified by Lloyd's Register Quality Assurance (LRQA) Quality Management System in compliance with ISO 9001:2008 on the process approach basis. On this basis and including the requirements of the ISO 14001:2004 (regarding the environment) and OHSAS 18001:2007 (regarding the health and occupational safety), Risk Engineering Ltd has developed and introduced Integrated Management System aim at achieving and demonstrating good results regarding protection of the environment, health and occupational safety. The processes under control by the Integrated Management System and applicable at the company are divided in two general types: A) Management processes: Strategic management and Management of the human resources. B) Processes describing the main activities: design/development process; project management; management of industrial projects and technical infrastructure project; construction, installation, repair and operation of power industry facilities; commercial activities and marketing; investigation of energy efficiency of industrial systems and certification of buildings regarding energy efficiency; consulting activity in the field of industry and energy as well as consultant in accordance with the Law of the Spatial Planning; management of the

Hanford Site Environment Safety and Health (ES and H) FY 1999 and FY 2000 Execution Commitment Summary

Energy Technology Data Exchange (ETDEWEB)

REEP, I.E.

1999-12-01

All sites in the U.S. Department of Energy (DOE) Complex prepare this report annually for the DOE Office of Environment, Safety and Health (EH). The purpose of this report is to provide a summary of the previous and current year's Environment, Safety and Health (ES&H) execution commitments and the S&H resources that support these activities. The fiscal year (FY) 1999 and 2000 information (Sieracki 1999) and data contained in the ''Hanford Site Environment, Safety and Health Fiscal Year 2001 Budget-Risk Management Summary'' (RL 1999) were the basis for preparing this report. Fiscal year 2000 finding of Office of Environmental Management (EM) and Office of Nuclear Energy, Science and Technology (NE) activities is based on the President's budget of $1,065.1 million and $28.0 million, plus $2.7 million carryover finding, respectively, as of October 31, 1999. Any funding changes as a result of the Congressional appropriation process will be reflected in the Fiscal Year 2002 ES&H Budget-Risk Management Summary to be issued in May 2000. This report provides the end-of-year status of FY 1999 ES&H execution commitments, including actual S&H expenditures, and describes planned FY 2000 ES&H execution commitments and the S&H resources needed to support those activities. This requirement is included in the ES&H ''Guidance for FY200l Budget Formulations and Execution'' (DOE 1999).

Pacific Northwest Laboratory annual report for 1980 to the DOE Assistant Secretary for Environment. Part 5. Environmental assessment, control, health and safety

International Nuclear Information System (INIS)

Baalman, R.W.; Hays, I.D.

1981-02-01

Pacific Northwest Laboratory's (PNL) 1980 annual report to the DOE Assistant Secretary for Environment describes research in environment, health, and safety conducted during fiscal year 1980. Part 5 includes technology assessments for natural gas, enhanced oil recovery, oil shale, uranium mining, magnetic fusion energy, solar energy, uranium enrichment and industrial energy utilization; regional analysis studies of environmental transport and community impacts; environmental and safety engineering for LNG, oil spills, LPG, shale oil waste waters, geothermal liquid waste disposal, compressed air energy storage, and nuclear/fusion fuel cycles; operational and environmental safety studies of decommissioning, environmental monitoring, personnel dosimetry, and analysis of criticality safety; health physics studies; and epidemiological studies. Also included are an author index, organization of PNL charts and distribution lists of the annual report, along with lists of presentations and publications

Pacific Northwest Laboratory annual report for 1990 to the Assistant Secretary for Environment, Safety, and Health

International Nuclear Information System (INIS)

Faust, L.G.; Moraski, R.V.; Selby, J.M.

1991-05-01

Part 5 of the 1990 Annual Report to the US Department of Energy's Assistant Secretary for Environment, Safety, and Health presents Pacific Northwest Laboratory's progress on work performed for the Office of Environmental Guidance, the Office of Environmental Compliance, the Office of Environmental Audit, the Office of National Environmental Policy Act Project Assistance, the Office of Nuclear Safety, the Office of Safety Compliance, and the Office of Policy and Standards. For each project, as identified by the Field Work Proposal, there is an article describing progress made during fiscal year 1990. Authors of these articles represent a broad spectrum of capabilities derived from five of the seven technical centers of the Laboratory, reflecting the interdisciplinary nature of the work

Pacific Northwest Laboratory annual report for 1980 to the DOE Assistant Secretary for Environment. Part 5. Environmental assessment, control, health and safety

Energy Technology Data Exchange (ETDEWEB)

Baalman, R.W.; Hays, I.D. (eds.)

1981-02-01

Pacific Northwest Laboratory's (PNL) 1980 annual report to the DOE Assistant Secretary for Environment describes research in environment, health, and safety conducted during fiscal year 1980. Part 5 includes technology assessments for natural gas, enhanced oil recovery, oil shale, uranium mining, magnetic fusion energy, solar energy, uranium enrichment and industrial energy utilization; regional analysis studies of environmental transport and community impacts; environmental and safety engineering for LNG, oil spills, LPG, shale oil waste waters, geothermal liquid waste disposal, compressed air energy storage, and nuclear/fusion fuel cycles; operational and environmental safety studies of decommissioning, environmental monitoring, personnel dosimetry, and analysis of criticality safety; health physics studies; and epidemiological studies. Also included are an author index, organization of PNL charts and distribution lists of the annual report, along with lists of presentations and publications. (DLS)

Research and development of technologies for safe and environmentally optimal recovery and disposal of explosive wastes. Task 2, Preliminary impact assessment for environment, health and safety (EIA)

Energy Technology Data Exchange (ETDEWEB)

Duijm, N.J.; Markert, F. [Risoe (Denmark); Larsen, S.G. [DEMEX A/S (Denmark)

1998-09-01

As described in the project proposal `Research and Development of Technologies for Safe and Environmentally optimal recovery and Disposal of Explosive Wastes`, dated 31. May 1996, the objective of Task 2, Preliminary Impact Assessment for Environment, Health and Safety, is to: Analyse the environmental impact of noise and emissions to air, water and soil; Assess the risk of hazards to workers` health and safety and to the public. Task 2, Preliminary Impact Assessment for Environment, Health and Safety (EIA), has been performed from August 1997 to September 1998. First, a methodology has been established, based on Multi-Criteria Decision Analysis (MCDA), to select the `best` technology on the basis of clearly defined objectives, including minimal impacts on environment, health and safety. This included a review of different types of explosive waste with a focus on the environment implications, identifying the issues relevant to defining the criteria or objectives with respect to environment and safety in the framework of explosive waste, as well as the preliminary definition of objectives for the final impact assessment. Second, the previously identified recovery and disposal technologies (Task 1) have been qualitatively assessed on the basis of the relevant objectives. This qualitative assessment includes also economic considerations and an attempt to rank the technologies in an MCDA framework. (au)

Safety and Health Division achievements during 40 years

International Nuclear Information System (INIS)

Noriah Mod Ali

2012-01-01

During her speech, presenter outlined several issues regarding on establishment of Safety and Health Division since 40 years. This division contain of 3 sub unit; Physical Safety Group, Medical Physic Group and Non-ionizing Radiation group (NIR). The objectives of this division to implement R and D activities and services regarding safety and radiological health also non-radiological to ensure public safety, environment and asset suit with obligations established by authorities, IAEA standards and regulations.(author)

Pacific Northwest Laboratory annual report for 1989 to the Assistant Secretary for Environment, Safety, and Health

International Nuclear Information System (INIS)

Faust, L.G.; Doctor, P.G.; Selby, J.M.

1990-04-01

Part 5 of the 1989 Annual Report to the US Department of Energy's Assistant Secretary for Environment, Safety, and Health presents Pacific Northwest Laboratory's progress on work performed for the Office of Environmental Guidance and Compliance, the Office of Environmental Audit, the Office of National Environmental Policy Act Project Assistance, the Office of Nuclear Safety, the Office of Safety Compliance, and the Office of Policy and Standards. For each project, as identified by the Field Work Proposal, there is an article describing progress made during fiscal year 1989. Authors of these articles represent a broad spectrum of capabilities derived from five of the seven technical centers of the Laboratory, reflecting the interdisciplinary nature of the work. 35 refs., 1 fig

Health and safety at DNE [Dounreay Nuclear Power Development Establishment

International Nuclear Information System (INIS)

Walford, J.G.; Tyler, G.R.

1988-11-01

This report reviews health and safety experience at the UKAEA's Dounreay Nuclear Power Development Establishment for 1986 and gives relevant data in the fields of health physics and general safety. It includes sections on: organization, policy and training; monitoring of the working environment; personnel monitoring; protection of the public; radiological incidents; and non-radiological health and safety. (author)

How good is BNFL's health and safety?

International Nuclear Information System (INIS)

Berry, R.J.; Coulston, D.J.

1989-01-01

A historical perspective of the development of health and safety philosophy and practice within the nuclear industry is followed by a description of the Company's safety management system. This involves three elements, policy, implementation and audit. Data given on discharges to the environment and occupational dose. (U.K.)

Environment, Safety and Health progress assessment of the Idaho National Engineering Laboratory (INEL)

International Nuclear Information System (INIS)

1993-08-01

The ES ampersand H Progress Assessments are part of the Department's continuous improvement process throughout DOE and its contractor organizations. The purpose of the INEL ES ampersand H Progress Assessment is to provide the Department with concise independent information on the following: (1) change in culture and attitude related to ES ampersand H activities; (2) progress and effectiveness of the ES ampersand H corrective actions resulting from previous Tiger Team Assessments; (3) adequacy and effectiveness of the ES ampersand H self-assessment programs of the DOE line organizations and the site management and operating contractor; and (4) effectiveness of DOE and contractor management structures, resources, and systems to effectively address ES ampersand H problems. It is not intended that this Progress Assessment be a comprehensive compliance assessments of ES ampersand H activities. The points of reference for assessing programs at the INEL were, for the most part, the 1991 INEL Tiger Team Assessment, the INEL Corrective Action Plan, and recent appraisals and self-assessments of INEL. Horizontal and vertical reviews of the following programmatic areas were conducted: Management: Corrective action program; self-assessment; oversight; directives, policies, and procedures; human resources management; and planning, budgeting, and resource allocation. Environment: Air quality management, surface water management, groundwater protection, and environmental radiation. Safety and Health: Construction safety, worker safety and OSHA, maintenance, packaging and transportation, site/facility safety review, and industrial hygiene

Health and safety annual report 1988

International Nuclear Information System (INIS)

1989-01-01

This report on health and safety provides a review of the impact of the Comapny's activities on its workforce, the public and the environment. New sections include safety auditing, emergency planning and health and safety research. BNFL operates five sites in north west England and southern Scotland. The head office and Engineering Design Centre is at Risley, near Warrington. Fuel is manufactured at Springfields near Preston, uranium is enriched for modern nuclear power stations at Capenhurst near Chester and spent fuel is reprocessed at Sellafield. BNFL also operate Calder Hall (Sellafield) and Chapelcross (Scotland) power stations and a disposal site for low-level radioactive wastes at Drigg near Sellafield. Radiation sources and BNFL's radioactive discharge are first explained generally and then specifically for each BNFL site. Industrial and radiological safety within BNFL are described. (UK)

Occupational safety and health: progress toward the 1990 objectives for the nation.

OpenAIRE

Millar, J D; Myers, M L

1983-01-01

Occupational safety and health is 1 of 15 areas addressed in the Public Health Service's Objectives for the Nation. This area represents 104 million working men and women and the deaths, diseases, and injuries that result from exposures to hazards in their work environment. Characteristics of public health practice are compared with characteristics of occupational safety and health practice. The National Institute for Occupational Safety and Health (NIOSH), created by the Occupational Safety ...

Health and safety annual report 1989

International Nuclear Information System (INIS)

1989-01-01

This 1989 annual report on Health and Safety in BNFL is intended to give the public a general review of the impact of the Company's activities on its workforce, the public and the environment. The activities at Sellafield, Springfields, Chapelcross, Drigg and Capenhurst are outlined, together with sections on medical services and transport, and radiation monitoring of workforce and the environment. (author)

Practical implementation of good practice in health, environment and safety management in enterprise in the Lodz region.

Science.gov (United States)

Michalak, Jacek

2002-10-01

Good practice in health, environment and safety management in enterprise (GP HESME) is the process that aims at continuous improvement in health, environment and safety performance, involving all stakeholders within and outside the enterprise. The GP HESME system is intended to function at different levels: international, national, local community, and enterprise. The most important issues at the first stage of GP HESME implementation in the Lodz region are described. Also, the proposals of future activities in Lodz are presented. Practical implementation of GP HESME requires close co-operation among all stakeholders: local authorities, employers, employees, research institutions, and the state inspectorate. The WHO and the Nofer Institute of Occupational Medicine (NIOM) are initiating implementation, delivering professional consultation, education and training of stakeholders in the NIOM School of Public Health. The implementation of GP HESME in the Lodz region started in 1999 from a WHO meeting on criteria and indicators, followed by close collaboration of NIOM with the city's Department of Public Health. 'Directions of Actions for Health of Lodz Citizens' is now the city's official document that includes GP HESME as an important part of public health policy in Lodz. Several conferences were organized by NIOM together with the Professional Managers' Club, Labor Inspection, and the city's Department of Public Health to assess the most important needs of enterprises. The employers and managerial staff, who predominated among the participants, stated the need for tailored sets of indicators and economic appraisal of GP HESME activities. Special attention is paid to GP HESME in supermarkets and community-owned enterprises, e.g., a local transportation company. A special program for small- and medium-size enterprises will be the next step of GP HESME in the Lodz region. The implementation of GP HESME is possible if the efforts of local authorities; research

Safety and health practice among laboratory staff in Malaysian education sector

Science.gov (United States)

Husna Che Hassan, Nurul; Rasdan Ismail, Ahmad; Kamilah Makhtar, Nor; Azwadi Sulaiman, Muhammad; Syuhadah Subki, Noor; Adilah Hamzah, Noor

2017-10-01

Safety is the most important issue in industrial sector such as construction and manufacturing. Recently, the increasing number of accident cases reported involving school environment shows the important of safety issues in education sector. Safety awareness among staff in this sector is crucial in order to find out the method to prevent the accident occurred in future. This study was conducted to analyze the knowledge of laboratory staff in term of safety and health practice in laboratory. Survey questionnaires were distributing among 255 of staff laboratory from ten District Education Offices in Kelantan. Descriptive analysis shows that the understanding of safety and health practice are low while doing some job activities in laboratory. Furthermore, some of the staff also did not implemented safety practice that may contribute to unplanned event occur in laboratory. Suggestion that the staff at laboratory need to undergo on Occupational Safety and Health training to maintain and create safe environment in workplaces.

Perceived school safety is strongly associated with adolescent mental health problems.

Science.gov (United States)

Nijs, Miesje M; Bun, Clothilde J E; Tempelaar, Wanda M; de Wit, Niek J; Burger, Huibert; Plevier, Carolien M; Boks, Marco P M

2014-02-01

School environment is an important determinant of psychosocial function and may also be related to mental health. We therefore investigated whether perceived school safety, a simple measure of this environment, is related to mental health problems. In a population-based sample of 11,130 secondary school students, we analysed the relationship of perceived school safety with mental health problems using multiple logistic regression analyses to adjust for potential confounders. Mental health problems were defined using the clinical cut-off of the self-reported Strengths and Difficulties Questionnaire. School safety showed an exposure-response relationship with mental health problems after adjustment for confounders. Odds ratios increased from 2.48 ("sometimes unsafe") to 8.05 ("very often unsafe"). The association was strongest in girls and young and middle-aged adolescents. Irrespective of the causal background of this association, school safety deserves attention either as a risk factor or as an indicator of mental health problems.

Pacific Northwest Laboratory annual report for 1988 to the Assistant Secretary for Environment, Safety, and Health: Part 5, Environment, safety, health, and quality assurance

International Nuclear Information System (INIS)

Faust, L.G.; Pennell, W.T.; Selby, J.M.

1989-02-01

This document summarizes the research programs now underway at Battelle's Pacific Northwest Laboratory in the areas of environmental safety, health, and quality assurance. Topics include internal irradiation, emergency plans, dose equivalents, risk assessment, dose equivalents, surveys, neutron dosimetry, and radiation accidents

Management of nanomaterials safety in research environment

Directory of Open Access Journals (Sweden)

Riediker Michael

2010-12-01

Full Text Available Abstract Despite numerous discussions, workshops, reviews and reports about responsible development of nanotechnology, information describing health and environmental risk of engineered nanoparticles or nanomaterials is severely lacking and thus insufficient for completing rigorous risk assessment on their use. However, since preliminary scientific evaluations indicate that there are reasonable suspicions that activities involving nanomaterials might have damaging effects on human health; the precautionary principle must be applied. Public and private institutions as well as industries have the duty to adopt preventive and protective measures proportionate to the risk intensity and the desired level of protection. In this work, we present a practical, 'user-friendly' procedure for a university-wide safety and health management of nanomaterials, developed as a multi-stakeholder effort (government, accident insurance, researchers and experts for occupational safety and health. The process starts using a schematic decision tree that allows classifying the nano laboratory into three hazard classes similar to a control banding approach (from Nano 3 - highest hazard to Nano1 - lowest hazard. Classifying laboratories into risk classes would require considering actual or potential exposure to the nanomaterial as well as statistical data on health effects of exposure. Due to the fact that these data (as well as exposure limits for each individual material are not available, risk classes could not be determined. For each hazard level we then provide a list of required risk mitigation measures (technical, organizational and personal. The target 'users' of this safety and health methodology are researchers and safety officers. They can rapidly access the precautionary hazard class of their activities and the corresponding adequate safety and health measures. We succeed in convincing scientist dealing with nano-activities that adequate safety measures and

Management of nanomaterials safety in research environment.

Science.gov (United States)

Groso, Amela; Petri-Fink, Alke; Magrez, Arnaud; Riediker, Michael; Meyer, Thierry

2010-12-10

Despite numerous discussions, workshops, reviews and reports about responsible development of nanotechnology, information describing health and environmental risk of engineered nanoparticles or nanomaterials is severely lacking and thus insufficient for completing rigorous risk assessment on their use. However, since preliminary scientific evaluations indicate that there are reasonable suspicions that activities involving nanomaterials might have damaging effects on human health; the precautionary principle must be applied. Public and private institutions as well as industries have the duty to adopt preventive and protective measures proportionate to the risk intensity and the desired level of protection. In this work, we present a practical, 'user-friendly' procedure for a university-wide safety and health management of nanomaterials, developed as a multi-stakeholder effort (government, accident insurance, researchers and experts for occupational safety and health). The process starts using a schematic decision tree that allows classifying the nano laboratory into three hazard classes similar to a control banding approach (from Nano 3--highest hazard to Nano1--lowest hazard). Classifying laboratories into risk classes would require considering actual or potential exposure to the nanomaterial as well as statistical data on health effects of exposure. Due to the fact that these data (as well as exposure limits for each individual material) are not available, risk classes could not be determined. For each hazard level we then provide a list of required risk mitigation measures (technical, organizational and personal). The target 'users' of this safety and health methodology are researchers and safety officers. They can rapidly access the precautionary hazard class of their activities and the corresponding adequate safety and health measures. We succeed in convincing scientist dealing with nano-activities that adequate safety measures and management are promoting

The work environment and empowerment as predictors of patient safety culture in Turkey.

Science.gov (United States)

Dirik, Hasan Fehmi; Intepeler, Seyda Seren

2017-05-01

As scant research based information is available regarding the work environment, empowerment and patient safety culture, this study from a developing country (Turkey) in which health care institutions are in a state of transition, aimed to investigate further the relationships between these three variables. A cross-sectional descriptive design was employed. The sample comprised 274 nurse participants working in a university hospital located in Izmir (Turkey). In data evaluation, descriptive statistics and hierarchical regression analyses were applied. The work environment and structural empowerment were related to the patient safety culture and explained 55% of the variance in patient safety culture perceptions. 'Support for optimal patient care', 'nurse/physician relationships' and 'staff involvement in organisational affairs' were the significant predictors. An enhancement of the work environment and providing access to empowerment structures may help health care organisations improve the patient safety culture. In light of the findings, the following actions can be recommended to inform health care leaders: providing necessary resources for nursing practise, encouraging nurses' participation in decision-making, strengthening communication within the team and giving nurses the opportunities to cope with challenging work problems to learn and grow. © 2017 John Wiley & Sons Ltd.

Improving work environments in health care: test of a theoretical framework.

Science.gov (United States)

Rathert, Cheryl; Ishqaidef, Ghadir; May, Douglas R

2009-01-01

In light of high levels of staff turnover and variability in the quality of health care, much attention is currently being paid to the health care work environment and how it potentially relates to staff, patient, and organizational outcomes. Although some attention has been paid to staffing variables, more attention must be paid to improving the work environment for patient care. The purpose of this study was to empirically explore a theoretical model linking the work environment in the health care setting and how it might relate to work engagement, organizational commitment, and patient safety. This study also explored how the work environment influences staff psychological safety, which has been show to influence several variables important in health care. Clinical care providers at a large metropolitan hospital were surveyed using a mail methodology. The overall response rate was 42%. This study analyzed perceptions of staff who provided direct care to patients. Using structural equation modeling, we found that different dimensions of the work environment were related to different outcome variables. For example, a climate for continuous quality improvement was positively related to organizational commitment and patient safety, and psychological safety partially mediated these relationships. Patient-centered care was positively related to commitment but negatively related to engagement. Health care managers need to examine how organizational policies and practices are translated into the work environment and how these influence practices on the front lines of care. It appears that care provider perceptions of their work environments may be useful to consider for improvement efforts.

Pacific Northwest Laboratory annual report for 1988 to the Assistant Secretary for Environment, Safety, and Health: Part 5, Environment, safety, health, and quality assurance

Energy Technology Data Exchange (ETDEWEB)

Faust, L.G.; Pennell, W.T.; Selby, J.M.

1989-02-01

This document summarizes the research programs now underway at Battelle's Pacific Northwest Laboratory in the areas of environmental safety, health, and quality assurance. Topics include internal irradiation, emergency plans, dose equivalents, risk assessment, dose equivalents, surveys, neutron dosimetry, and radiation accidents. (TEM)

Radiation effects on man health, environment, safety, security. Global Chernobyl mapping

International Nuclear Information System (INIS)

Bebeshko, V.; Bazyka, D.; Volovik, S.; Loganovsky, K.; Sushko, V.; Siedow, J.; Cohen, H.; Ginsburg, G.; Chao, N.; Chute, J.

2007-01-01

Complete text of publication follows. Objectives: Ionizing radiation is a primordial terrestrial and extraterrestrial background and archetypal environmental stress-factor for life origin, evolution, and existence. We all live in radiation world inevitably involving nuclear energy production, nuclear weapon, nuclear navy, radioactive waste, pertinent medical diagnostics and treatment, etc with connected certain probability of relevant accidents and terrorist attack, space and jet travels, high natural background radiation, etc - actual and potential sources of radiation exposures and effects. State-of- the art integral fundamental research on radiation effects on man health, environment, safety, and security (REMHESS) is nowadays paramount necessity and challenge. Methods and results: In given generalized conceptual framework unique 20 years Chernobyl multidimensional research and databases for radiation effects on man's all organism systems represent invaluable original basis and resources for mapping Chernobyl data and REMHESS challenge. Granted by DOE brand new Chernobyl Research and Service Project based on 'Sarcophagus-II' (Object 'Shelter') workers only one in radiation history baseline cohort, corresponding biorepository prospective dynamic data, integrated conceptual database system, and 'state of the art' 'omics' (genomics, proteomics, metabolomics) analysis is designed specifically for coherent addressing global REMHESS problems. In this connection 'Sarcophagus-II' is only one unique universal model. Conclusions: The fundamental goals of novel strategic Project and global Chernobyl mapping are to determine specific 'omics' signatures of radiation for man depending of exposure peculiarity to understand ultimate molecular mechanisms of radiation effects, gene environment interactions, etiology of organisms systems disorders and diseases, and to develop new biomarkers and countermeasures to protect man health in the framework of global REMHESS challenge

Nature-based strategies for improving urban health and safety

Science.gov (United States)

Michelle C. Kondo; Eugenia C. South; Charles C. Branas

2015-01-01

Place-based programs are being noticed as key opportunities to prevent disease and promote public health and safety for populations at-large. As one key type of place-based intervention, nature-based and green space strategies can play an especially large role in improving health and safety for dwellers in urban environments such as US legacy cities that lack nature...

Industrial Safety and Applied Health Physics Division, annual report for 1982

International Nuclear Information System (INIS)

1983-12-01

Activities during the past year are summarized for the Health Physics Department, the Environmental Management Department, and the Safety Department. The Health Physics Department conducts radiation and safety surveys, provides personnel monitoring services for both external and internal radiation, and procures, services, and calibrates appropriate portable and stationary health physics instruments. The Environmental Management Department insures that the activities of the various organizations within ORNL are carried out in a responsible and safe manner. This responsibility involves the measurement, field monitoring, and evaluation of the amounts of radionuclides and hazardous materials released to the environment and the control of hazardous materials used within ORNL. The department also collaborates in the design of ORNL Facilities to help reduce the level of materials released to the environment. The Safety Department is responsible for maintaining a high level of staff safety. This includes aspects of both operational and industrial safety and also coordinates the activities of the Director's Safety Review Committee

Industrial Safety and Applied Health Physics Division, annual report for 1982

Energy Technology Data Exchange (ETDEWEB)

1983-12-01

Activities during the past year are summarized for the Health Physics Department, the Environmental Management Department, and the Safety Department. The Health Physics Department conducts radiation and safety surveys, provides personnel monitoring services for both external and internal radiation, and procures, services, and calibrates appropriate portable and stationary health physics instruments. The Environmental Management Department insures that the activities of the various organizations within ORNL are carried out in a responsible and safe manner. This responsibility involves the measurement, field monitoring, and evaluation of the amounts of radionuclides and hazardous materials released to the environment and the control of hazardous materials used within ORNL. The department also collaborates in the design of ORNL Facilities to help reduce the level of materials released to the environment. The Safety Department is responsible for maintaining a high level of staff safety. This includes aspects of both operational and industrial safety and also coordinates the activities of the Director's Safety Review Committee. (ACR)

Environment, safety and health compliance assessment, Feed Materials Production Center, Fernald, Ohio

Energy Technology Data Exchange (ETDEWEB)

1989-09-01

The Secretary of Energy established independent Tiger Teams to conduct environment, safety, and health (ES H) compliance assessments at US Department of Energy (DOE) facilities. This report presents the assessment of the Feed Materials Production Center (FMPC) at Fernald, Ohio. The purpose of the assessment at FMPC is to provide the Secretary with information regarding current ES H compliance status, specific ES H noncompliance items, evaluation of the adequacy of the ES H organizations and resources (DOE and contractor), and root causes for noncompliance items. Areas reviewed included performance under Federal, state, and local agreements and permits; compliance with Federal, state and DOE orders and requirements; adequacy of operations and other site activities, such as training, procedures, document control, quality assurance, and emergency preparedness; and management and staff, including resources, planning, and interactions with outside agencies.

Occupational Safety and Health Practices: An Alarming Call to Action

Science.gov (United States)

Threeton, Mark D.; Evanoski, Danielle C.

2014-01-01

In an effort to provide additional insight on providing a secure teaching and learning environment within schools, this study sought to: (1) explore the safety and health practices within Career and Technical Education (CTE); and (2) identify the perceived obstacles which appear to hinder implementation of health and safety programs. While it…

Evaluating the Clinical Learning Environment: Resident and Fellow Perceptions of Patient Safety Culture.

Science.gov (United States)

Bump, Gregory M; Calabria, Jaclyn; Gosman, Gabriella; Eckart, Catherine; Metro, David G; Jasti, Harish; McCausland, Julie B; Itri, Jason N; Patel, Rita M; Buchert, Andrew

2015-03-01

The Accreditation Council for Graduate Medical Education has begun to evaluate teaching institutions' learning environments with Clinical Learning Environment Review visits, including trainee involvement in institutions' patient safety and quality improvement efforts. We sought to address the dearth of metrics that assess trainee patient safety perceptions of the clinical environment. Using the Hospital Survey on Patient Safety Culture (HSOPSC), we measured resident and fellow perceptions of patient safety culture in 50 graduate medical education programs at 10 hospitals within an integrated health system. As institution-specific physician scores were not available, resident and fellow scores on the HSOPSC were compared with national data from 29 162 practicing providers at 543 hospitals. Of the 1337 residents and fellows surveyed, 955 (71.4%) responded. Compared with national practicing providers, trainees had lower perceptions of patient safety culture in 6 of 12 domains, including teamwork within units, organizational learning, management support for patient safety, overall perceptions of patient safety, feedback and communication about error, and communication openness. Higher perceptions were observed for manager/supervisor actions promoting patient safety and for staffing. Perceptions equaled national norms in 4 domains. Perceptions of patient safety culture did not improve with advancing postgraduate year. Trainees in a large integrated health system have variable perceptions of patient safety culture, as compared with national norms for some practicing providers. Administration of the HSOPSC was feasible and acceptable to trainees, and may be used to track perceptions over time.

Health physics, safety and medical services report for 1989

International Nuclear Information System (INIS)

Burt, A.K.; Bird, R.W.

1990-09-01

The Health Physics, Safety and Medical Services Report for Harwell Laboratory for 1989 includes data on the monitoring of the working environment, personnel monitoring, radiological incidents, disposal of radioactive waste and protection of the public. Work on emergency planning, non-radiological health and safety, occupational hygiene, operations support is also discussed. Finally the medical services available and the medical examinations performed are described. (UK)

Occupational safety and health management among five ASEAN countries: Thailand, Indonesia, Malaysia, Philippines, and Singapore.

Science.gov (United States)

Buranatrevedh, Surasak

2015-03-01

Occupational safety and health is one of important issues for workforce movement among ASEAN countries. The objective was to study laws, main agencies, and law enforcement regarding occupational safety and health in Thailand, Indonesia, Malaysia, Philippines, and Singapore. This documentary research covered laws, main agencies' duties, and occupational safety and health law enforcement in Thailand, Indonesia, Malaysia, Philippines, and Singapore. Thailand has its Occupational Safety, Health, and Work EnvironmentAct 2011. Its main agency was Department of Labor Protection and Welfare. Indonesia had WorkSafety Act (Law No. 1, 1970). Its main agency was Department of Manpower and Transmigration. Malaysia had Occupational Safety and Health Act (OSHA) 1994. Its main agency is the Department of Occupational Safety and Health. The Philippines has its Occupational Safety and Health Standards. Its main agency was Department ofLabor and Employment. Singapore has its Workplace Safety and Health Act 2006. Its main agency is Occupational Safety and Health Division. Occupational safety and health law enforcement among each county covers work environment surveillance, workers' health surveillance, advice about prevention and control of occupational health hazards, training and education of employers and employees, data systems, and research. Further in-depth surveys of occupational safety and health among each ASEAN county are needed to develop frameworks for occupational safety and health management for all ASEAN countries.

Occupational Safety and Health Management System (OSHMS)

International Nuclear Information System (INIS)

Shyen, A.K.S.; Mohd Khairul Hakimin; Manisah Saedon

2011-01-01

Safe work environment has always been one of the major concerns at workplace. For this, Occupational Safety and Health Act 1994 has been promulgated for all workplaces to ensure the Safety, Health and Welfare of its employees and any person at workplaces. Malaysian Nuclear Agency therefore has started the initiative to review and improve the current Occupational Safety and Health Management System (OSHMS) by going for OHSAS 18001:2007 and MS 1722 standards certification. This would also help in our preparation to bid as the TSO (Technical Support Organization) for the NPP (Nuclear Power Plant) when it is established. With a developed and well maintained OSHMS, it helps to create a safe working condition and thus enhancing the productivity, quality and good morale. Ultimately, this will lead to a greater organization profit. However, successful OSHMS requires full commitment and support from all level of the organization to work hand in hand in implementing the safety and health policy. Therefore it is essential for all to acknowledge the progress of the implementation and be part of it. (author)

Site Environmental Report for 2006. Volume I, Environment, Health, and Safety Division

Energy Technology Data Exchange (ETDEWEB)

None

2007-09-30

Each year, Ernest Orlando Lawrence Berkeley National Laboratory prepares an integrated report on its environmental programs to satisfy the requirements of United States Department of Energy Order 231.1A, Environment, Safety, and Health Reporting.1 The Site Environmental Report for 2006 summarizes Berkeley Lab’s environmental management performance, presents environmental monitoring results, and describes significant programs for calendar year 2006. (Throughout this report, Ernest Orlando Lawrence Berkeley National Laboratory is referred to as “Berkeley Lab,” “the Laboratory,” “Lawrence Berkeley National Laboratory,” and “LBNL.”) The report is separated into two volumes. Volume I is organized into an executive summary followed by six chapters that contain an overview of the Laboratory, a discussion of the Laboratory’s environmental management system, the status of environmental programs, and summarized results from surveillance and monitoring activities. Volume II contains individual data results from surveillance and monitoring activities.

Telecommuting: Occupational health considerations for employee health and safety.

Science.gov (United States)

Healy, M L

2000-06-01

1. Information technology has moved "work" out of a centralized location. Employees who telecommute pose significant challenges and considerations for the practice of occupational health nursing. 2. Employer and employee benefits associated with telecommuting are reportedly associated with high levels of job satisfaction. However, the occupational health and safety risks of this new work environment need to be fully assessed and understood. 3. The ergonomic controls to minimize the risk of repetitive motion injuries are the same for both office and home locations. Additional attention need to be paid to implementing risk controls for other physical hazards and psychosocial considerations, as well as personal safety and security issues. 4. The scope of occupational health nursing practice needs to remain dynamic, recognizing the impact new technologies have on the workplace, to continue to meet the needs of the changing workplace.

Proceeding of Radiation Safety and Environment

International Nuclear Information System (INIS)

1996-01-01

Scientific Presentation of Radiation Safety and Environment was held on 20-21 august 1996 at Center of Research Atomic Energy Pasar Jum'at, Jakarta, Indonesia. Have presented 50 papers about Radiation Safety, dosimetry and standardization, environment protection and radiation effect

Perceived School Safety is Strongly Associated with Adolescent Mental Health Problems

NARCIS (Netherlands)

Nijs, Miesje M.; Bun, Clothilde J. E.; Tempelaar, Wanda M.; de Wit, Niek J.; Burger, Huibert; Plevier, Carolien M.; Boks, Marco P. M.

School environment is an important determinant of psychosocial function and may also be related to mental health. We therefore investigated whether perceived school safety, a simple measure of this environment, is related to mental health problems. In a population-based sample of 11,130 secondary

Sanitation health risk and safety planning in urban residential ...

African Journals Online (AJOL)

The aim of this review paper was to determine the best sanitation health risk and safety planning approach for sustainable management of urban environment. This was achieved by reviewing the concept of sanitation safety planning as a tool. The review adopted exploratory research approach and used secondary data ...

Linking Environmental Sustainability, Health, and Safety Data in Health Care: A Research Roadmap.

Science.gov (United States)

Kaplan, Susan B; Forst, Linda

2017-08-01

Limited but growing evidence demonstrates that environmental sustainability in the health-care sector can improve worker and patient health and safety. Yet these connections are not appreciated or understood by decision makers in health-care organizations or oversight agencies. Several studies demonstrate improvements in quality of care, staff satisfaction, and work productivity related to environmental improvements in the health-care sector. A pilot study conducted by the authors found that already-collected data could be used to evaluate impacts of environmental sustainability initiatives on worker and patient health and safety, yet few hospitals do so. Future research should include a policy analysis of laws that could drive efforts to integrate these areas, elucidation of organizational models that promote sharing of environmental and health and safety data, and development of tools and methods to enable systematic linkage and evaluation of these data to expand the evidence base and improve the hospital environment.

A LITERATURE REVIEW ON GLOBAL OCCUPATIONAL SAFETY AND HEALTH PRACTICE & ACCIDENTS SEVERITY

Directory of Open Access Journals (Sweden)

Kassu Jilcha

2016-06-01

Full Text Available This literature review focuses on researches undertaken since 1980s onwards. The purpose of the study is to identify existing gaps on workplace safety and health management and propose future research areas. The review adds value to existing electronic database through integration of researches' results. To identify existing gaps, a systematic literature review approach has been used. The reviews were undertaken through keywords and safety related topics. In the literature, various characteristics of workplace safety and health problems were found emanating from the lack of operational activities of the employees, internal working environment and external environment those impose hazards on employee temporarily, permanently and on working environments. The integration of multidisciplinary approaches and collaborative model of hub and peripheral industries to protect workplace safety hazards to develop multilevel model has been undermined in many researches. The other face of finding is that knowledge transfer mechanism and industrial topology factors are left. Some researches finding showed that they have focused on single problems related to health and health factors leaving universal improving workplace safety. In general, this literature reviews compare various studies output based on their research method and findings to fills gap and add value to a body of knowledge.

Health, safety and environmental research program

International Nuclear Information System (INIS)

Dinner, P.J.

1983-01-01

This report outlines the Health, Safety and Environmental Research Program being undertaken by the CFFTP. The Program objectives, relationship to other CFFTP programs, implementation plans and expected outputs are stated. Opportunities to build upon the knowledge and experience gained in safely managing tritium in the CANDU program, by addressing generic questions pertinent to tritium safety for fusion facilities, are identified. These opportunities exist across a broad spectrum of issues covering the anticipated behaviour of tritium in fusion facilities, the surrounding environment and in man

DOE standard: Integration of environment, safety, and health into facility disposition activities. Volume 1 of 2: Technical standard

International Nuclear Information System (INIS)

1998-05-01

This Department of Energy (DOE) technical standard (referred to as the Standard) provides guidance for integrating and enhancing worker, public, and environmental protection during facility disposition activities. It provides environment, safety, and health (ES and H) guidance to supplement the project management requirements and associated guidelines contained within DOE O 430.1A, Life-Cycle Asset Management (LCAM), and amplified within the corresponding implementation guides. In addition, the Standard is designed to support an Integrated Safety Management System (ISMS), consistent with the guiding principles and core functions contained in DOE P 450.4, Safety Management System Policy, and discussed in DOE G 450.4-1, Integrated Safety Management System Guide. The ISMS guiding principles represent the fundamental policies that guide the safe accomplishment of work and include: (1) line management responsibility for safety; (2) clear roles and responsibilities; (3) competence commensurate with responsibilities; (4) balanced priorities; (5) identification of safety standards and requirements; (6) hazard controls tailored to work being performed; and (7) operations authorization. This Standard specifically addresses the implementation of the above ISMS principles four through seven, as applied to facility disposition activities

Health and safety in clinical laboratories in developing countries: safety considerations.

Science.gov (United States)

Ejilemele, A A; Ojule, A C

2004-01-01

Clinical laboratories are potentially hazardous work areas. Health and safety in clinical laboratories is becoming an increasingly important subject as a result of the emergence of highly infectious diseases such as hepatitis and HIV. This is even more so in developing countries where health and safety have traditionally been regarded as low priority issues, considering the more important health problems confronting the health authorities in these countries. We conducted a literature search using the medical subheadings titles on the INTERNET over a period of twenty years and summarized our findings. This article identifies hazards in the laboratories and highlights measures to make the laboratory a safer work place. It also emphasizes the mandatory obligations of employers and employees towards the attainment of acceptable safety standards in clinical laboratories in Third World countries in the face of the current HIV/AIDS epidemic in many of these developing countries especially in the sub-Saharan Africa while accommodating the increasing work load in these laboratories. Both the employer and the employee have major roles to play in the maintenance of a safe working environment. This can be achieved if measures discussed are incorporated into everyday laboratory practice.

Environment, safety and health progress assessment of the Fernald Environmental Management Project (FEMP)

International Nuclear Information System (INIS)

1991-11-01

This report documents the results of the Environment, Safety, and Health (ES ampersand H) Progress Assessment of the Fernald Environmental Management Project (FEMP), Fernald, Ohio, conducted from October 15 through October 25, 1991. The Secretary of Energy directed that small, focused, ES ampersand H Progress Assessments be performed as part of the continuing effort to institutionalize line management accountability and the self-assessment process in the areas of ES ampersand H. The FEMP assessment is the pilot assessment for this new program. The objectives for the FEMP ES ampersand H Progress Assessment were to assess: (1) how the FEMP has progressed since the 1989 Tiger Assessment; (2) how effectively the FEMP has corrected specific deficiencies and associated root causes identified by that team; and (3) whether the current organization, resources, and systems are sufficient to proactively manage ES ampersand H issues

Environment, safety and health progress assessment of the Fernald Environmental Management Project (FEMP)

Energy Technology Data Exchange (ETDEWEB)

1991-11-01

This report documents the results of the Environment, Safety, and Health (ES&H) Progress Assessment of the Fernald Environmental Management Project (FEMP), Fernald, Ohio, conducted from October 15 through October 25, 1991. The Secretary of Energy directed that small, focused, ES&H Progress Assessments be performed as part of the continuing effort to institutionalize line management accountability and the self-assessment process in the areas of ES&H. The FEMP assessment is the pilot assessment for this new program. The objectives for the FEMP ES&H Progress Assessment were to assess: (1) how the FEMP has progressed since the 1989 Tiger Assessment; (2) how effectively the FEMP has corrected specific deficiencies and associated root causes identified by that team; and (3) whether the current organization, resources, and systems are sufficient to proactively manage ES&H issues.

The ambiguity of contents and results in the Norwegian internal control of safety, health and environment reform

Energy Technology Data Exchange (ETDEWEB)

Hovden, Jan

1998-05-01

The results of introducing a mandatory public reform in Norway with regard to the requirements on enterprises' management of safety, health and environment (SHE) systems are reviewed and discussed. The reform, named internal control (IC), implies a delegation of the direct control of SHE conditions to the enterprises, and introduces system auditing as the main tool for the regulatory bodies. A mixture of successes and failures in implementing the reform, including some perspectives for further adaptation and development of the IC concept are discussed.

Nature-Based Strategies for Improving Urban Health and Safety.

Science.gov (United States)

Kondo, Michelle C; South, Eugenia C; Branas, Charles C

2015-10-01

Place-based programs are being noticed as key opportunities to prevent disease and promote public health and safety for populations at-large. As one key type of place-based intervention, nature-based and green space strategies can play an especially large role in improving health and safety for dwellers in urban environments such as US legacy cities that lack nature and greenery. In this paper, we describe the current understanding of place-based influences on public health and safety. We focus on nonchemical environmental factors, many of which are related to urban abandonment and blight. We then review findings from studies of nature-based interventions regarding impacts on health, perceptions of safety, and crime. Based on our findings, we suggest that further research in this area will require (1) refined measures of green space, nature, and health and safety for cities, (2) interdisciplinary science and cross-sector policy collaboration, (3) observational studies as well as randomized controlled experiments and natural experiments using appropriate spatial counterfactuals and mixed methods, and (4) return-on-investment calculations of potential economic, social, and health costs and benefits of urban greening initiatives.

Framework for Continuous Assessment and Improvement of Occupational Health and Safety Issues in Construction Companies

OpenAIRE

Mahmoudi, Shahram; Ghasemi, Fakhradin; Mohammadfam, Iraj; Soleimani, Esmaeil

2014-01-01

Background: Construction industry is among the most hazardous industries, and needs a comprehensive and simple-to-administer tool to continuously assess and promote its health and safety performance. Methods: Through the study of various standard systems (mainly Health, Safety, and Environment Management System; Occupational Health and Safety Assessment Series 180001; and British Standard, occupational health and safety management systems-Guide 8800), seven main elements were determined fo...

Measuring and controlling the mining environment for worker health and safety

CSIR Research Space (South Africa)

Pretorius, C

2012-10-01

Full Text Available Factors affecting the health and safety of Mine Workers Stress Physical Strain Fatigue Ergono- mics Silica/ Dust NIHL Heat Accidents Planisa 1. HFACS: Accident Analysis ? CSIR 2012 Slide 4 Swiss-Cheese Model illustrates how accidents...

OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT WITH THE USE OF BRAINSTORMING METHOD

Directory of Open Access Journals (Sweden)

Artur Woźny

2018-01-01

Full Text Available Health and safety at work issue concerns every employer. Adjusting the work environment to legal requirements and standards is the key to creating health and safety culture. In every functioning OSH system there are various types of problems that employers face. The subject of the article is how to solve the problem of safety in production systems using the brainstorming method. The basic ele-ment of creating health and safety culture is an appropriate approach to occupational risk manage-ment. Risk assessment in the workplace should take place in teams as it is possible to reliably identi-fy hazards and accurately assess them.

WNA's Policy Document : sustaining global best practices in uranium, mining and processing, principles for managing radiation, health and safety, waste and the environment

International Nuclear Information System (INIS)

Saint-Pierre, S.; Waste Management and Decommissioning Working Group-WM and DW

2008-01-01

The worldwide community of uranium mining and processing recognizes that managing radiation, health and safety, waste and the environment is paramount. Such responsible management applies at all stages of planning and activities. Today we are acting to ensure that all parties directly involved in uranium mining and processing strive to achieve the highest levels of excellence in these fields. We are doing so by sustaining a strong safety culture based on a commitment to common, internationally shared principles. This paper sets out principles for the management of radiation, health and safety, waste and the environment applicable to sites throughout the world. In national and regional settings where nuclear fuel cycle activities are well developed, these principles already serve as the underpinning for 'Codes of Practice' that govern uranium mining and processing. In any given setting, a Code of Practice is needed to guide practical implementation of these principles according to the regional, national or site-specific context. These principles are published in the belief that they hold special relevance for emerging uranium producing countries that do not yet have fully developed regulations for the control of radiation, health and safety, waste and the environment associated with uranium mining and processing. The principles are equally relevant for operators, contractors, and regulators newly engaged in uranium mining and processing. Once national regulations are fully developed, they can be expected to embody these principles. Each principle affirmed here will not apply to the same extent for each party. Ultimately, the precise allocation of responsibilities must be set at the national and local levels. This document holds the status of a policy and ethical declaration by the full WNA membership, which the global nuclear industry. The principles affirmed here are supported by key relevant international organizations, including the IAEA and the global mining

Measuring and improving patient safety through health information technology: The Health IT Safety Framework.

Science.gov (United States)

Singh, Hardeep; Sittig, Dean F

2016-04-01

Health information technology (health IT) has potential to improve patient safety but its implementation and use has led to unintended consequences and new safety concerns. A key challenge to improving safety in health IT-enabled healthcare systems is to develop valid, feasible strategies to measure safety concerns at the intersection of health IT and patient safety. In response to the fundamental conceptual and methodological gaps related to both defining and measuring health IT-related patient safety, we propose a new framework, the Health IT Safety (HITS) measurement framework, to provide a conceptual foundation for health IT-related patient safety measurement, monitoring, and improvement. The HITS framework follows both Continuous Quality Improvement (CQI) and sociotechnical approaches and calls for new measures and measurement activities to address safety concerns in three related domains: 1) concerns that are unique and specific to technology (e.g., to address unsafe health IT related to unavailable or malfunctioning hardware or software); 2) concerns created by the failure to use health IT appropriately or by misuse of health IT (e.g. to reduce nuisance alerts in the electronic health record (EHR)), and 3) the use of health IT to monitor risks, health care processes and outcomes and identify potential safety concerns before they can harm patients (e.g. use EHR-based algorithms to identify patients at risk for medication errors or care delays). The framework proposes to integrate both retrospective and prospective measurement of HIT safety with an organization's existing clinical risk management and safety programs. It aims to facilitate organizational learning, comprehensive 360 degree assessment of HIT safety that includes vendor involvement, refinement of measurement tools and strategies, and shared responsibility to identify problems and implement solutions. A long term framework goal is to enable rigorous measurement that helps achieve the safety

Focusing on patient safety in the Neonatal Intensive Care Unit environment

Directory of Open Access Journals (Sweden)

Ilias Chatziioannidis

2017-02-01

Full Text Available Patient safety in the Neonatal Intensive Care Unit (NICU environment is an under-researched area, but recently seems to get high priority on the healthcare quality agenda worldwide. NICU, as a highly sensitive and technological driven environment, signals the importance for awareness in causation of mistakes and accidents. Adverse events and near misses that comprise the majority of human errors, cause morbidity often with devastating results, even death. Likewise in other organizations, errors causes are multiple and complex. Other high reliability organizations, such as air force and nuclear industry, offer examples of how standardized/homogenized work and removal of systems weaknesses can minimize errors. It is widely accepted that medical errors can be explained based on personal and/or system approach. The impact/effect of medical errors can be reduced when thorough/causative identification approach is followed by detailed analysis of consequences and prevention measures. NICU’s medical and nursing staff should be familiar with patient safety language, implement best practices, and support safety culture, maximizing efforts for reducing errors. Furthermore, top management commitment and support in developing patient safety culture is essential in order to assure the achievement of the desirable organizational safety outcomes. The aim of the paper is to review patient safety issues in the NICU environment, focusing on development and implementation of strategies, enhancing high quality standards for health care.

The Role of HSE management System in Improving health, safety and environment performance in an Oil Organization

Directory of Open Access Journals (Sweden)

SS. Alizadeh

2006-10-01

Full Text Available Background and aims   Nowadays, organisations: trying to utilize HSE system, To establish an appropriate system in the line of maintenance and promotion of healthy work environment without any accidents, injuries, and pollution.  HSE management system is a tool to control and improve the performance of health and safety  and environment in all development programs of industrial and other structural organizations. This is in fact an integrated system, so that all human financial and equipment resources will support each other to provide a healthy and convenience environment with no any accident and injuries.   Methods   In this case study all components of an HSE management system is review briefly and explain the role of this system in accident reduction rate and work efficiency in an oil company in the Persian Golf.Three years activities of HSE system in this company been studied, using all  reports and any related documents. Different variances as indicators had been defined with which  the annual performance of the HSE system, of the company have been evaluated.   Results   The results show that there are significant improvement in health, safety and environment during the period of 2001-2003 as HSE system implemented.  The rate of LTIF decreased from 0.69 in 2001 to 0.5 in 2003 or FAR decreased from 2.2 in 2001 to  0.7 in 2003, and the air pollution of SO 2 decreased from 397 T. in 2001 to 309T. in 2003.   Conclusion   This study indicated that although the number of employees, number of working hours and number of projects increased significantly during the years 2001 to 2003, but the rate of  different related indicators decreased such as LTIF, TRIR, FAR and pollutants like SO 2 , Co 2 , No  and CH4.

Maintaining Health and Safety at Workplace: Employee and Employer's Role in Ensuring a Safe Working Environment

Science.gov (United States)

Jonathan, Grace Katunge; Mbogo, Rosemary Wahu

2016-01-01

The concern for health and safety is legitimate in every context of human enterprise. In schools, for teaching staff's safety to be guaranteed, the equipment available should be properly maintained and installation for nonexistent ones done according to the health and safety policies. With a focus on Mbooni West district, this paper reports the…

Annual health, safety and environmental performance report for 1993

Energy Technology Data Exchange (ETDEWEB)

Gallapher, J D; Wright, M G

1994-05-01

This report summarizes the occupational health and safety and the environmental protection record of the operations of Atomic Energy of Canada Limited (AECL) during 1993. An introduction highlights the results and describes the facilities and organizational systems. Subsequent sections indicate the performance of the company with respect to personnel radiation exposures, occupational injuries, the handling of wastes, and the release of materials into the environment. Programs in health, safety and environmental protection are presented, along with site remediation and emergency preparedness practices. (author). 14 figs.

Annual health, safety and environmental performance report for 1993

International Nuclear Information System (INIS)

Gallapher, J.D.; Wright, M.G.

1994-05-01

This report summarizes the occupational health and safety and the environmental protection record of the operations of Atomic Energy of Canada Limited (AECL) during 1993. An introduction highlights the results and describes the facilities and organizational systems. Subsequent sections indicate the performance of the company with respect to personnel radiation exposures, occupational injuries, the handling of wastes, and the release of materials into the environment. Programs in health, safety and environmental protection are presented, along with site remediation and emergency preparedness practices. (author). 14 figs

Nuclear health and safety. Status of GAO's environmental, safety, and health recommendations to DOE

International Nuclear Information System (INIS)

England-Joseph, Judy; Bannerman, Carl J.; Fenzel, William F.; Brack, David L.; Harter, Frederick A.

1990-04-01

DOE's operations are carried out at many contractor-operated sites around the country, including major sites within the nuclear weapons complex that are involved in the production of nuclear material for weapons and naval fuel. At these sites DOE contractors routinely use and generate large quantities of a wide range of hazardous and radioactive materials. Because these materials require special handling by workers. Also pursuant to Mar. 15, 1989, request, we provided you a report entitled Nuclear Health and Safety: Need for Improved Responsiveness to Problems at DOE Sites (GAO/RCED-90-101, Mar. 28, 1990). to prevent exposure to themselves or releases into the environment, DOE's weapons complex, considered in its entirety, is among the potentially more dangerous industrial operations in the world. Over the last decade, at the request of the Congress, we have carried out a series of assessments and evaluations of various aspects of the complex. In over 60 reports and testimonies published since 1990, we have called attention to the mounting problems facing DOE's nuclear weapons complex. This body of work includes (1) identifying serious, costly, and widespread environmental, safety, and health problems at DOE facilities, (2) calling for outside independent oversight of DOE's nuclear operations, and (3) making recommendations to DOE to strengthen its oversight, providing more detailed information and plans to the Congress, and improving its management and accounting practices. In total, our reports and testimonies have included 54 recommendations to DOE, in addition to recommendations to the Congress, concerning environmental, safety, and health matters at the complex. We consider 23 of the 54 recommendations to be still open. The open recommendations call for improvements such as tighter program controls and clearer standards and policies related to environmental, safety, and health matters

MP-Division health and safety reference handbook

International Nuclear Information System (INIS)

Putnam, T.M.

1987-09-01

This report presents the objectives, organization, policies, and essential rules and procedures that have been adopted by MP Division and that form the basis of the Health and Safety Program of the Clinton P. Anderson Meson Physics Facility (LAMPF). The facility includes the beam-delivery systems for the Los Alamos Neutron Scattering Center and the Weapons Neutron Research Facility (LANSCE/WNR). The program is designed not only to assure the health and safety of all personnel, including users, in their work at LAMPF, and of MP-Division staff in their work on the LANSCE/WNR beam lines, but also to protect the facility (buildings and equipment) and the environment. 33 refs., 18 figs., 2 tabs

Safety and environment

International Nuclear Information System (INIS)

Cogne, F.

1975-01-01

The author analyses the papers presented by C. Starr and M. Muntzing at the Paris Conference on the maturity of nuclear energy. The main problems raised in the matter of safety (safety of the plants, plutonium toxicity, the possibilities of theft or sabotage, treatment and storage of the waste) are analyzed and it is pointed out that the hazards arising from the use of nuclear power are contained within reasonable limits. The experts should take the initiative of informing the general public on these matters as the mass media circulate too much inaccurate information in this field. As concerns the environment, it is the choice of sites and the harmonizing of the rules and procedures which appear to be the most important problems for the authorities charged with safety measures [fr

Industrial safety and applied health physics. Annual report for 1977

International Nuclear Information System (INIS)

Auxier, J.A.; Davis, D.M.

1978-06-01

Progress is reported on the following: radiation monitoring with regard to personnel monitoring and health physics instrumentation; environs surveillance with regard to atmospheric monitoring, water monitoring, radiation background measurements, and soil and grass samples; radiation and safety surveys with regard to laboratory operations monitoring, radiation incidents, and laundry monitoring; industrial safety and special projects with regard to accident analysis, disabling injuries, and safety awards

Technology Development, Evaluation, and Application (TDEA) FY 1999 Progress Report, Environment, Safety, and Health (ESH) Division

International Nuclear Information System (INIS)

Hoffman, Larry G.

2000-01-01

This progress report presents the results of 10 projects funded ($500K) in FY99 by the Technology Development, Evaluation, and Application (TDEA) Committee of the Environment, Safety, and Health Division. Five are new projects for this year; seven projects have been completed in their third and final TDEA-funded year. As a result of their TDEA-funded projects, investigators have published thirty-four papers in professional journals, proceedings, or Los Alamos reports and presented their work at professional meetings. Supplemental funds and in-kind contributions, such as staff time, instrument use, and work space, were also provided to TDEA-funded projects by organizations external to ESH Division

Technology Development, Evaluation, and Application (TDEA) FY 1999 Progress Report, Environment, Safety, and Health (ESH) Division

Energy Technology Data Exchange (ETDEWEB)

Larry G. Hoffman

2000-12-01

This progress report presents the results of 10 projects funded ($500K) in FY99 by the Technology Development, Evaluation, and Application (TDEA) Committee of the Environment, Safety, and Health Division. Five are new projects for this year; seven projects have been completed in their third and final TDEA-funded year. As a result of their TDEA-funded projects, investigators have published thirty-four papers in professional journals, proceedings, or Los Alamos reports and presented their work at professional meetings. Supplemental funds and in-kind contributions, such as staff time, instrument use, and work space, were also provided to TDEA-funded projects by organizations external to ESH Division.

Health and safety manual

International Nuclear Information System (INIS)

1980-02-01

The manual consists of the following chapters: general policies and administration; the Environmental Health and Safety Department; the Medical Services Department: biological hazards; chemical safety; confined space entry; cryogenic safety; electrical safety; emergency plans; engineering and construction; evacuations, trenching, and shoring; fire safety; gases, flammable and compressed; guarding, mechanical; ladders and scaffolds, work surfaces; laser safety; materials handling and storage; noise; personal protective equipment; pressure safety; radiation safety, ionizing and non-ionizing; sanitation; seismic safety; training, environmental health and safety; tools, power and hand-operated; traffic and transportation; and warning signs and devices

Health, Safety and Environment (HSE assessment of neighborhoods: A case study in Tehran Municipality

Directory of Open Access Journals (Sweden)

Narmin Hassanzadeh- Rangi

2014-09-01

Full Text Available Urbanization is growing rapidly in recent centuries. This phenomenon can cause many changes in various aspects of human life including the economy, education and public health This study was conducted to assess the Health, Safety and Environment (HSE problems in Tehran neighborhoods. A new instrument was developed based on the results of a literature review and formulated during a pilot study. Through cluster sampling, 10 neighborhoods were selected based from 374 neighborhoods of Tehran. Six observers completed observational items during the field studies. Secondary data were used to obtain non-observation characteristics. Standard descriptive statistics were used to compare the HSE characteristics in sampled neighborhoods. Furthermore, control chart was used to as a decision rule to identify specific variation among sampled neighborhoods. Niavaran neighborhood had the best HSE status (52.80%±25.03 whereas Khak Sefid neighborhood had the worst one (20.09%±27.51. Standard deviations of HSE characteristics were high in different parts of a neighborhood. Statistical analysis indicated that significant differences in HSE characteristics exist among sampled neighborhoods. HSE status was in warning situation in both rich and poor neighborhoods. Community-based interventions were suggested as health promotion programs to involve and empower people in neighborhoods.

Integrating safety and health during deactiviation: With lessons learned from PUREX

International Nuclear Information System (INIS)

1995-01-01

This report summarizes an integrated safety and health approach used during facility deactivation activities at the Department of Energy (DOE) Plutonium-Uranium Extraction (PUREX) Facility in Hanford, Washington. Resulting safety and health improvements and the potential, complex-wide application of this approach are discussed in this report through a description of its components and the impacts, or lessons-learned, of its use during the PUREX deactivation project. As a means of developing and implementing the integrated safety and health approach, the PUREX technical partnership was established in 1993 among the Office of Environment, Safety and Health's Office of Worker Health and Safety (EH-5); the Office of Environmental Management's Offices of Nuclear Material and Facility Stabilization (EM-60) and Compliance and Program Coordination (EM-20); the DOE Richland Operations Office; and the Westinghouse Hanford Company. It is believed that this report will provide guidance for instituting an integrated safety and health approach not only for deactivation activities, but for decommissioning and other clean-up activities as well. This confidence is based largely upon the rationality of the approach, often termed as common sense, and the measurable safety and health and project performance results that application of the approach produced during actual deactivation work at the PUREX Facility

Environment, safety, health, and quality plan for the TRU- Contaminated Arid Soils Project of the Landfill Stabilization Focus Area Program

International Nuclear Information System (INIS)

Watson, L.R.

1995-06-01

The Landfill Stabilization Focus Area (LSFA) is a program funded by the US Department of Energy Office of Technology Development. LSFA supports the applied research, development, demonstration, testing, and evaluation of a suite of advanced technologies that together form a comprehensive remediation system for the effective and efficient remediation of buried waste. The TRU-Contaminated Arid Soils project is being conducted under the auspices of the LSFA Program. This document describes the Environment, Safety, Health, and Quality requirements for conducting LSFA/Arid Soils activities at the Idaho National Engineering Laboratory. Topics discussed in this report, as they apply to LSFA/Arid Soils operations, include Federal, State of Idaho, and Environmental Protection Agency regulations, Health and Safety Plans, Quality Program, Data Quality Objectives, and training and job hazard analysis. Finally, a discussion is given on CERCLA criteria and system and performance audits as they apply to the LSFA Program

An analysis of electronic health record-related patient safety incidents.

Science.gov (United States)

Palojoki, Sari; Mäkelä, Matti; Lehtonen, Lasse; Saranto, Kaija

2017-06-01

The aim of this study was to analyse electronic health record-related patient safety incidents in the patient safety incident reporting database in fully digital hospitals in Finland. We compare Finnish data to similar international data and discuss their content with regard to the literature. We analysed the types of electronic health record-related patient safety incidents that occurred at 23 hospitals during a 2-year period. A procedure of taxonomy mapping served to allow comparisons. This study represents a rare examination of patient safety risks in a fully digital environment. The proportion of electronic health record-related incidents was markedly higher in our study than in previous studies with similar data. Human-computer interaction problems were the most frequently reported. The results show the possibility of error arising from the complex interaction between clinicians and computers.

Psychosocial safety climate as a precursor to conducive work environments, psychological health problems, and employee engagement

NARCIS (Netherlands)

M.F. Dollard (Maureen); A.B. Bakker (Arnold)

2010-01-01

textabstractWe constructed a model of workplace psychosocial safety climate (PSC) to explain the origins of job demands and resources, worker psychological health, and employee engagement. PSC refers to policies, practices, and procedures for the protection of worker psychological health and safety.

Vitamin G: effects of green space on health, well-being, and social safety

Directory of Open Access Journals (Sweden)

van den Berg Agnes E

2006-06-01

Full Text Available Abstract Background Looking out on and being in the green elements of the landscape around us seem to affect health, well-being and feelings of social safety. This article discusses the design of a research program on the effects of green space in the living environment on health, well-being and social safety. Methods/design The program consists of three projects at three different scales: at a macro scale using data on the Netherlands as a whole, at an intermediate scale looking into the specific effect of green space in the urban environment, and at micro scale investigating the effects of allotment gardens. The projects are observational studies, combining existing data on land use and health interview survey data, and collecting new data through questionnaires and interviews. Multilevel analysis and GIS techniques will be used to analyze the data. Discussion Previous (experimental research in environmental psychology has shown that a natural environment has a positive effect on well-being through restoration of stress and attentional fatigue. Descriptive epidemiological research has shown a positive relationship between the amount of green space in the living environment and physical and mental health and longevity. The program has three aims. First, to document the relationship between the amount and type of green space in people's living environment and their health, well-being, and feelings of safety. Second, to investigate the mechanisms behind this relationship. Mechanisms relate to exposure (leading to stress reduction and attention restoration, healthy behavior and social integration, and selection. Third, to translate the results into policy on the crossroads of spatial planning, public health, and safety. Strong points of our program are: we study several interrelated dependent variables, in different ordinary settings (as opposed to experimental or extreme settings, focusing on different target groups, using appropriate multilevel

Work Placements as Learning Environments for Patient Safety: Finnish and British Preregistration Nursing Students' Important Learning Events

Science.gov (United States)

Tella, Susanna; Smith, Nancy-Jane; Partanen, Pirjo; Turunen, Hannele

2016-01-01

Learning to ensure patient safety in complex health care environments is an internationally recognised concern. This article explores and compares Finnish (n = 22) and British (n = 32) pre-registration nursing students' important learning events about patient safety from their work placements in health care organisations. Written descriptions were…

Sandia Laboratories environment and safety programs

International Nuclear Information System (INIS)

Zak, B.D.; McGrath, P.E.; Trauth, C.A. Jr.

1975-01-01

Sandia, one of ERDA's largest laboratories, is primarily known for its extensive work in the nuclear weapons field. In recent years, however, Sandia's role has expanded to embrace sizeable programs in the energy, resource recovery, and the environment and safety fields. In this latter area, Sandia has programs which address nuclear, fossil fuel, and general environment and safety issues. Here we survey ongoing activities and describe in more detail aa few projects of particular interest. These range from a study of the impact of sealed disposal of radioactive wastes, through reactor safety and fossil fuel plume chemistry, to investigations of the composition and dynamics of the stratosphere

Regulatory role and approach of BARC Safety Council in safety and occupational health in BARC facilities

International Nuclear Information System (INIS)

Rajdeep; Jayarajan, K.; Taly, Y.K.

2016-01-01

Bhabha Atomic Research Centre is involved in multidisciplinary research and developmental activities, related to peaceful use of nuclear energy and its societal benefits. In order to achieve high level of performance of these facilities, the best efforts are made to maintain good health of the plant personnel and good working conditions. BARC Safety Council (BSC), which is the regulatory body for BARC facilities, regulates radiation safety, industrial safety and surveillance of occupational health, by implementing various rules and guidelines in BARC facilities. BARC Safety framework consists of various committees in a 3-tier system. The first tier is BSC, which is the apex body authorized for issuing directives, permissions, consents and authorizations. It is having responsibility of ensuring protection and safety of public, environment, personnel and facilities of BARC through enforcement of radiation protection and industrial safety programmes. Besides the 18 committees in 2"n"d tier, there are 6 other expert committees which assist in functioning of BSC. (author)

Improving health care quality and safety: the role of collective learning

Directory of Open Access Journals (Sweden)

Singer SJ

2015-11-01

Full Text Available Sara J Singer,1–4 Justin K Benzer,4–6 Sami U Hamdan4,6 1Department of Health Policy and Management, Harvard T.H. Chan School of Public Health, Boston, MA, USA; 2Department of Medicine, Harvard Medical School, Boston, MA, USA; 3Mongan Institute for Health Policy, Massachusetts General Hospital, Boston, MA, USA; 4Center for Healthcare Organization and Implementation Research, VA Boston Healthcare System, Boston, MA, USA; 5VISN 17 Center of Excellence for Research on Returning War Veterans, Waco, TX, USA; 6Department of Health Policy and Management, Boston University School of Public Health, Boston, MA, USA Abstract: Despite decades of effort to improve quality and safety in health care, this goal feels increasingly elusive. Successful examples of improvement are infrequently replicated. This scoping review synthesizes 76 empirical or conceptual studies (out of 1208 originally screened addressing learning in quality or safety improvement, that were published in selected health care and management journals between January 2000 and December 2014 to deepen understanding of the role that collective learning plays in quality and safety improvement. We categorize learning activities using a theoretical model that shows how leadership and environmental factors support collective learning processes and practices, and in turn team and organizational improvement outcomes. By focusing on quality and safety improvement, our review elaborates the premise of learning theory that leadership, environment, and processes combine to create conditions that promote learning. Specifically, we found that learning for quality and safety improvement includes experimentation (including deliberate experimentation, improvisation, learning from failures, exploration, and exploitation, internal and external knowledge acquisition, performance monitoring and comparison, and training. Supportive learning environments are characterized by team characteristics like psychological

The psychosocial work environment and certified occupational health and safety management systems in the public sector – experience from two Danish municipalities

DEFF Research Database (Denmark)

Hasle, Peter; Hohnen, Pernille; Helbo, Anne

2014-01-01

Certified occupational health and safety management (OHSM) systems are expected to cover the psychosocial work environment. We studied certified OHSM systems implemented in two medium-sized to large Danish municipalities. The cases show that the process of adopting OHSM systems from...... their traditional base in manufacturing to a public sector with a focus on the psychosocial work environment is difficult and complex. The management system seems to help maintaining systematic OHS activities but the actors are still searching for ways to fit the systems to the peculiarities of the psychosocial...

Site Environmental Report for 2004. Volume 1, Environment, Health, and Safety Division

Energy Technology Data Exchange (ETDEWEB)

None

2005-09-30

Each year, Ernest Orlando Lawrence Berkeley National Laboratory prepares an integrated report on its environmental programs to satisfy the requirements of United States Department of Energy Order 231.1A, Environment, Safety, and Health Reporting.1 The Site Environmental Report for 2004 summarizes Berkeley Lab’s environmental management performance, presents environmental monitoring results, and describes significant programs for calendar year 2004. (Throughout this report, Ernest Orlando Lawrence Berkeley National Laboratory is referred to as “Berkeley Lab,” “the Laboratory,” “Lawrence Berkeley National Laboratory,” and “LBNL.”) The report is separated into two volumes. Volume I contains an overview of the Laboratory, the status of environmental programs, and summarized results from surveillance and monitoring activities. Volume II contains individual data results from these activities. This year, the Site Environmental Report was distributed by releasing it on the Web from the Berkeley Lab Environmental Services Group (ESG) home page, which is located at http://www.lbl.gov/ehs/esg/. Many of the documents cited in this report also are accessible from the ESG Web page. CD and printed copies of this Site Environmental Report are available upon request.

Occupational Safety and Health in Venezuela.

Science.gov (United States)

Caraballo-Arias, Yohama

2015-01-01

Venezuela has pioneered a preventive-focused and comprehensive movement for Occupational Safety and Health (OSH) in Latin America. However, despite being an oil-rich country, it has some of the lowest salaries for their workers and highest levels of hyperinflation, devaluation, crime, and violence of the world. Review the current status and challenges on relevant aspects of OSH in Venezuela. Review of literature and documents from national governments, UN agencies, NGOs, and the Venezuelan government concerning OSH and related topics since 1986. Reformed in 2005, the Organic Law on Prevention, Conditions and Environment (LOPCYMAT) was a fundamental moment of change for OSH. Factors which have impacted OSH the strongest are (i) the creation of the National Institute of Occupational Safety and Health (INPSASEL) and (ii) the socioeconomic crisis Venezuela is going through. Venezuela's laws are innovative and yet non-compliance is enormous. Almost half of the population works in the informal sector. Following the International Labor Office projections, 5 people die per day in Venezuela due to occupational accidents or diseases, making health and safety at work a luxury rather than a right. The quality of life for the average worker has deteriorated, affecting not only health but the overall well-being of all Venezuelans. The political and socio-economic situation has led to a mass exodus of more than 1.6 million highly qualified and talented professionals. Many statistics concerning OSH are not updated and are unreliable regarding occupational accidents and diseases. There is a substantial difference between what is written to protect individual Venezuelans in the workplace and the reality of workplace conditions. Substantial governmental actions are needed in the immediate future to improve occupational safety and health of Venezuelan workers. Copyright © 2015 The Author. Published by Elsevier Inc. All rights reserved.

High temperature reactor safety and environment

International Nuclear Information System (INIS)

Brisbois, J.; Charles, J.

1975-01-01

High-temperature reactors are endowed with favorable safety and environmental factors resulting from inherent design, main-component safety margins, and conventional safety systems. The combination of such characteristics, along with high yields, prove in addition, that such reactors are plagued with few problems, can be installed near users, and broaden the recourse to specific power, therefore fitting well within a natural environment [fr

Work, obesity, and occupational safety and health.

Science.gov (United States)

Schulte, Paul A; Wagner, Gregory R; Ostry, Aleck; Blanciforti, Laura A; Cutlip, Robert G; Krajnak, Kristine M; Luster, Michael; Munson, Albert E; O'Callaghan, James P; Parks, Christine G; Simeonova, Petia P; Miller, Diane B

2007-03-01

There is increasing evidence that obesity and overweight may be related, in part, to adverse work conditions. In particular, the risk of obesity may increase in high-demand, low-control work environments, and for those who work long hours. In addition, obesity may modify the risk for vibration-induced injury and certain occupational musculoskeletal disorders. We hypothesized that obesity may also be a co-risk factor for the development of occupational asthma and cardiovascular disease that and it may modify the worker's response to occupational stress, immune response to chemical exposures, and risk of disease from occupational neurotoxins. We developed 5 conceptual models of the interrelationship of work, obesity, and occupational safety and health and highlighted the ethical, legal, and social issues related to fuller consideration of obesity's role in occupational health and safety.

Positioning radiation safety in occupational safety and health programme in an organization

International Nuclear Information System (INIS)

Abed Bin Onn

2000-01-01

The Atomic Energy Licensing Act 1984, which is under purview of the Ministry of Science, Technology and Environment, and Occupational Safety and Health Act, OSHA 1994, under Ministry of Human Resources were discussed. RPO responsibilities were discussed in detailed. As the conclusion, organization which complies with the provisions of the AELA 1984 are well on the way to complying the requirements of OSHA 1994

Health and safety plan for the Environmental Restoration Program at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Clark, C. Jr.; Burman, S.N.; Cipriano, D.J. Jr.; Uziel, M.S.; Kleinhans, K.R.; Tiner, P.F.

1994-08-01

This Programmatic Health and Safety plan (PHASP) is prepared for the U.S. Department of Energy (DOE) Oak Ridge National Laboratory (ORNL) Environmental Restoration (ER) Program. This plan follows the format recommended by the U.S. Environmental Protection Agency (EPA) for remedial investigations and feasibility studies and that recommended by the EM40 Health and Safety Plan (HASP) Guidelines (DOE February 1994). This plan complies with the Occupational Safety and Health Administration (OSHA) requirements found in 29 CFR 1910.120 and EM-40 guidelines for any activities dealing with hazardous waste operations and emergency response efforts and with OSHA requirements found in 29 CFR 1926.65. The policies and procedures in this plan apply to all Environmental Restoration sites and activities including employees of Energy Systems, subcontractors, and prime contractors performing work for the DOE ORNL ER Program. The provisions of this plan are to be carried out whenever activities are initiated that could be a threat to human health or the environment. This plan implements a policy and establishes criteria for the development of procedures for day-to-day operations to prevent or minimize any adverse impact to the environment and personnel safety and health and to meet standards that define acceptable management of hazardous and radioactive materials and wastes. The plan is written to utilize past experience and best management practices to minimize hazards to human health and safety and to the environment from event such as fires, explosions, falls, mechanical hazards, or any unplanned release of hazardous or radioactive materials to air, soil, or surface water

Health and safety plan for the Environmental Restoration Program at Oak Ridge National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Clark, C. Jr.; Burman, S.N.; Cipriano, D.J. Jr.; Uziel, M.S.; Kleinhans, K.R.; Tiner, P.F.

1994-08-01

This Programmatic Health and Safety plan (PHASP) is prepared for the U.S. Department of Energy (DOE) Oak Ridge National Laboratory (ORNL) Environmental Restoration (ER) Program. This plan follows the format recommended by the U.S. Environmental Protection Agency (EPA) for remedial investigations and feasibility studies and that recommended by the EM40 Health and Safety Plan (HASP) Guidelines (DOE February 1994). This plan complies with the Occupational Safety and Health Administration (OSHA) requirements found in 29 CFR 1910.120 and EM-40 guidelines for any activities dealing with hazardous waste operations and emergency response efforts and with OSHA requirements found in 29 CFR 1926.65. The policies and procedures in this plan apply to all Environmental Restoration sites and activities including employees of Energy Systems, subcontractors, and prime contractors performing work for the DOE ORNL ER Program. The provisions of this plan are to be carried out whenever activities are initiated that could be a threat to human health or the environment. This plan implements a policy and establishes criteria for the development of procedures for day-to-day operations to prevent or minimize any adverse impact to the environment and personnel safety and health and to meet standards that define acceptable management of hazardous and radioactive materials and wastes. The plan is written to utilize past experience and best management practices to minimize hazards to human health and safety and to the environment from event such as fires, explosions, falls, mechanical hazards, or any unplanned release of hazardous or radioactive materials to air, soil, or surface water.

Work Pressure and Safety Behaviors among Health Workers in Ghana: The Moderating Role of Management Commitment to Safety

OpenAIRE

Amponsah-Tawaih, Kwesi; Adu, Michael Appiah

2016-01-01

Background: safety and healthy working environment has received numerous research attention over the years. Majority of these researches seem to have been conducted in the construction industry, with little attention in the health sector. Nonetheless, there are couple of studies conducted in Africa that suggest pressure in hospitals. Therefore the aim of the study was to examine how pressure influence safety behavior in the hospitals. With reference to the relevance of safety behavior in prim...

MODERN THREATS OF SOCIAL SAFETY OF THE EDUCATION ENVIRONMENT AND THEIR PREVENTION

Directory of Open Access Journals (Sweden)

Павел Александрович Кисляков

2013-04-01

Full Text Available Purpose: identify modern threats of safety of the school and substantiate the direction of their prevention.Methodology: a theoretical analysis of psychological and pedagogical literature on the issues of safety of students.Results: on the basis of theoretical and empirical analysis identified the following threats of social safety of the education environment: criminal threats, threats of extremism and terrorism, physical and mental abuse, interpersonal conflicts, addictive behavior of students. Substantiates the necessity the design of social safety protection, including space of health, space of tolerance, psychologically comfortable space without violence also providing appropriate training of educators.Practical implications: the system of education.DOI: http://dx.doi.org/10.12731/2218-7405-2013-2-2

Environment, Safety and Health Progress Assessment of the Argonne Illinois Site

Energy Technology Data Exchange (ETDEWEB)

1993-11-01

This report documents the results of the US Department of Energy (DOE) Environment, Safety and Health (ES&H) Progress Assessment of the Argonne Illinois Site (AIS), near Chicago, Illinois, conducted from October 25 through November 9, 1993. During the Progress Assessment, activities included a selective review of the ES&H management systems and programs with principal focus on the DOE Office of Energy Research (ER); CH, which includes the Argonne Area Office; the University of Chicago; and the contractor`s organization responsible for operation of Argonne National Laboratory (ANL). The ES&H Progress Assessments are part of DOE`s continuing effort to institutionalize line management accountability and the self-assessment process throughout DOE and its contractor organizations. The purpose of the AIS ES&H Progress Assessment was to provide the Secretary of Energy, senior DOE managers, and contractor management with concise independent information on the following: change in culture and attitude related to ES&H activities; progress and effectiveness of the ES&H corrective actions resulting from the previous Tiger Team Assessment; adequacy and effectiveness of the ES&H self-assessment process of the DOE line organizations, the site management, and the operating contractor; and effectiveness of DOE and contractor management structures, resources, and systems to effectively address ES&H problems and new ES&H initiatives.

Environment, Safety and Health Progress Assessment of the Argonne Illinois Site

International Nuclear Information System (INIS)

1993-11-01

This report documents the results of the US Department of Energy (DOE) Environment, Safety and Health (ES ampersand H) Progress Assessment of the Argonne Illinois Site (AIS), near Chicago, Illinois, conducted from October 25 through November 9, 1993. During the Progress Assessment, activities included a selective review of the ES ampersand H management systems and programs with principal focus on the DOE Office of Energy Research (ER); CH, which includes the Argonne Area Office; the University of Chicago; and the contractor's organization responsible for operation of Argonne National Laboratory (ANL). The ES ampersand H Progress Assessments are part of DOE's continuing effort to institutionalize line management accountability and the self-assessment process throughout DOE and its contractor organizations. The purpose of the AIS ES ampersand H Progress Assessment was to provide the Secretary of Energy, senior DOE managers, and contractor management with concise independent information on the following: change in culture and attitude related to ES ampersand H activities; progress and effectiveness of the ES ampersand H corrective actions resulting from the previous Tiger Team Assessment; adequacy and effectiveness of the ES ampersand H self-assessment process of the DOE line organizations, the site management, and the operating contractor; and effectiveness of DOE and contractor management structures, resources, and systems to effectively address ES ampersand H problems and new ES ampersand H initiatives

Environmental Management Waste Management Facility (EMWMF) Site-Specific Health and Safety Plan, Oak Ridge, Tennessee

Energy Technology Data Exchange (ETDEWEB)

Flynn, N.C. Bechtel Jacobs

2008-04-21

The Bechtel Jacobs Company LLC (BJC) policy is to provide a safe and healthy workplace for all employees and subcontractors. The implementation of this policy requires that operations of the Environmental Management Waste Management Facility (EMWMF), located one-half mile west of the U.S. Department of Energy (DOE) Y-12 National Security Complex, be guided by an overall plan and consistent proactive approach to environment, safety and health (ES&H) issues. The BJC governing document for worker safety and health, BJC/OR-1745, 'Worker Safety and Health Program', describes the key elements of the BJC Safety and Industrial Hygiene (IH) programs, which includes the requirement for development and implementation of a site-specific Health and Safety Plan (HASP) where required by regulation (refer also to BJC-EH-1012, 'Development and Approval of Safety and Health Plans'). BJC/OR-1745, 'Worker Safety and Health Program', implements the requirements for worker protection contained in Title 10 Code of Federal Regulations (CFR) Part 851. The EMWMF site-specific HASP requirements identifies safe operating procedures, work controls, personal protective equipment, roles and responsibilities, potential site hazards and control measures, site access requirements, frequency and types of monitoring, site work areas, decontamination procedures, and outlines emergency response actions. This HASP will be available on site for use by all workers, management and supervisors, oversight personnel and visitors. All EMWMF assigned personnel will be briefed on the contents of this HASP and will be required to follow the procedures and protocols as specified. The policies and procedures referenced in this HASP apply to all EMWMF operations activities. In addition the HASP establishes ES&H criteria for the day-to-day activities to prevent or minimize any adverse effect on the environment and personnel safety and health and to meet standards that define acceptable

10 CFR Appendix A to Part 851 - Worker Safety and Health Functional Areas

Science.gov (United States)

2010-01-01

... particular emphasis on biological select agents. (6) Establishes an immunization policy for personnel working... and environment, safety, and health protection organizations. (1) Contractors must provide the... establishing and maintaining a safe and healthful workplace. (f) A record, containing any medical, health...

The Role of OSHA in Safety and Health. Module SH-02. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on the role of OSHA (Occupational Safety and Health Act) in Safety and Health is one of 50 modules concerned with job safety and health. This module looks at the OSHA Act, its aims, and the rights and responsibilities of employers and workers under the Act. Following the introduction, 16 objectives (each keyed to a page in the…

Leveraging best practices to promote health, safety, sustainability, and stewardship.

Science.gov (United States)

Weiss, Marjorie D

2013-08-01

Strategically leveraging health and safety initiatives with sustainability and stewardship helps organizations improve profitability and positively impact team member and customer attachment to the organization. Collective efficacy enhances the triple bottom line: healthy people, healthy planet, and healthy profits. The HS(3)™ Best Practice Exchanges group demonstrated that collective efficacy can leverage the social cohesion, communication channels, and activities within workplaces to promote a healthy, sustainable work culture. This in turn (1) protects the health and safety of workers, (2) preserves the natural environment, and (3) increases attachment to the organization. Community-based participatory research using the Attach21 survey assessed the progress of these companies in their efforts to integrate health, safety, sustainability, and stewardship. Monthly Best Practice Exchanges promoted collective efficacy by providing support, encouragement, and motivation to share and adopt new ideas. Copyright 2013, SLACK Incorporated.

Annual health, safety and environmental performance report for 1992

International Nuclear Information System (INIS)

Orman, R.F.; Richards, S.

1993-12-01

This report summarizes the safety and environmental record of the operations of Atomic Energy of Canada Limited (AECL) during 1992. An introduction highlights the results and describes the facilities and organizational systems. Subsequent sections indicate the performance of the company with respect to personnel radiation exposures, occupational injuries, the handling of wastes and the release of materials into the environment. Programs in health, safety and environmental protection are presented, along with site remediation and emergency preparedness practices

Annual health, safety and environmental performance report for 1992

International Nuclear Information System (INIS)

Orman, R.F.; Richards, S.

1993-12-01

This report summarizes the safety and environmental record of the operations of Atomic Energy of Canada Limited (AECL) during 1992. an introduction highlights the results and describes the facilities and organizational systems. Subsequent sections indicate the performance of the company with respect to personnel radiation exposures, occupational injuries, the handling of wastes and the release of materials into the environment. Programs in health, safety and environmental protection are presented, along with site remediation and emergency preparedness practices

Health, safety and environmental unit performance assessment model under uncertainty (case study: steel industry).

Science.gov (United States)

Shamaii, Azin; Omidvari, Manouchehr; Lotfi, Farhad Hosseinzadeh

2017-01-01

Performance assessment is a critical objective of management systems. As a result of the non-deterministic and qualitative nature of performance indicators, assessments are likely to be influenced by evaluators' personal judgments. Furthermore, in developing countries, performance assessments by the Health, Safety and Environment (HSE) department are based solely on the number of accidents. A questionnaire is used to conduct the study in one of the largest steel production companies in Iran. With respect to health, safety, and environment, the results revealed that control of disease, fire hazards, and air pollution are of paramount importance, with coefficients of 0.057, 0.062, and 0.054, respectively. Furthermore, health and environment indicators were found to be the most common causes of poor performance. Finally, it was shown that HSE management systems can affect the majority of performance safety indicators in the short run, whereas health and environment indicators require longer periods of time. The objective of this study is to present an HSE-MS unit performance assessment model in steel industries. Moreover, we seek to answer the following question: what are the factors that affect HSE unit system in the steel industry? Also, for each factor, the extent of impact on the performance of the HSE management system in the organization is determined.

A new standard for multidisciplinary health and safety technicians

International Nuclear Information System (INIS)

Trinoskey, P.A.; Fry, L.A.; Egbert, W.F.

2000-01-01

Over the last two decades, a significant trend in health and safety has been toward greater specialization. However, compartmentalization of health and safety disciplines often leads to an inequity in resources, especially when appropriations overemphasize one risk to the detriment of others. For example, overemphasis on radiological safety can create an imbalance in overall worker protection. A multidisciplinary technical can help restore the balance and provide for a healthier and safer work environment. The key advantages of a multidisciplinary health and safety technician include: Broad coverage of the work area by one technician, More diverse use of the technician pool, Better coverage for off-shift or nonstandard hours, Balance of risks because all hazards are considered, Integrated emergency response, Ownership, Less time of identify the correct person with the requisite skills. We have developed a new standard that establishes the training and related qualifications for a multidisciplinary health and safety technician. The areas of training and qualification that are addressed include elements of industrial hygiene, industrial safety, fire protection, electrical safety, construction safety, and radiation safety. The initial core training program ensures that individuals are trained to the performance of requirements of the job. Initial training is in five areas: Fundamentals, Hazard recognition, Hazard assessment, Hazards controls, Hazards minimization. Core training is followed by formal qualification on specific tasks, including ventilation surveys, air monitoring, noise assessments, radiological monitoring, area inspections, work-area setups, and work coverage. The new standard addresses not only training topics and requirements, but also guidance to ensure that performance objectives are met. The standard applies to technicians, supervisors, technologists, and six specialty areas, including academic institutions and decontamination and decommissioning

A new standard for multidisciplinary health and safety technicians

Energy Technology Data Exchange (ETDEWEB)

Trinoskey, P.A.; Fry, L.A. [Lawrence Livermore National Laboratory, Univ. of California, CA (United States); Egbert, W.F. [Lawrence Livermore National Laboratory, Allied Signal Technical Corporation (United States)

2000-05-01

Over the last two decades, a significant trend in health and safety has been toward greater specialization. However, compartmentalization of health and safety disciplines often leads to an inequity in resources, especially when appropriations overemphasize one risk to the detriment of others. For example, overemphasis on radiological safety can create an imbalance in overall worker protection. A multidisciplinary technical can help restore the balance and provide for a healthier and safer work environment. The key advantages of a multidisciplinary health and safety technician include: Broad coverage of the work area by one technician, More diverse use of the technician pool, Better coverage for off-shift or nonstandard hours, Balance of risks because all hazards are considered, Integrated emergency response, Ownership, Less time of identify the correct person with the requisite skills. We have developed a new standard that establishes the training and related qualifications for a multidisciplinary health and safety technician. The areas of training and qualification that are addressed include elements of industrial hygiene, industrial safety, fire protection, electrical safety, construction safety, and radiation safety. The initial core training program ensures that individuals are trained to the performance of requirements of the job. Initial training is in five areas: Fundamentals, Hazard recognition, Hazard assessment, Hazards controls, Hazards minimization. Core training is followed by formal qualification on specific tasks, including ventilation surveys, air monitoring, noise assessments, radiological monitoring, area inspections, work-area setups, and work coverage. The new standard addresses not only training topics and requirements, but also guidance to ensure that performance objectives are met. The standard applies to technicians, supervisors, technologists, and six specialty areas, including academic institutions and decontamination and decommissioning

Nuclear health and safety

International Nuclear Information System (INIS)

1991-04-01

Numerous environmental, safety, and health problems found at other Department of Energy (DOE) defense nuclear facilities precipitated a review of these conditions at DOE's contractor-operated Pantex Plant, where our nation's nuclear weapons are assembled. This book focuses the review on examining key safety and health problems at Pantex and determining the need for external safety oversight of the plant

EMPLOYEE PERCEPTIONS OF OCCUPATIONAL HEALTH AND SAFETY STANDARDS IN THE STEEL INDUSTRY

Directory of Open Access Journals (Sweden)

J. Mojapelo

2016-07-01

Full Text Available The inability to follow occupational health and safety standards typically resultsin accidents that place severe financial burdens on both employees as well asorganisations. The aim of this studyis to explore the perceptionsof employees inthe steel industry towards occupational health and safety standards in the steelindustry in South Africa. A survey was conducted in which a structuredquestionnaire was distributed to a purposive sample of 165 employees employedby a largesteel processing company in Gauteng Province. The collected data wereanalysed using SPSS (Version 22.0. A combination of descriptive statistics andanalysis of mean scores was applied to meet the aim of the study. The resultsreveal that employees in the steel industry perceived that occupational health andsafety standards were satisfactory in all seven occupational health and safetydimensions considered in this study. These are (1 information and training, (2health and safety awareness, (3 employee behaviour (4 role of the supervisor, (5health and safety reporting mechanisms, (6 workplace inspection, and (7workplace environment. Among these dimensions, safety awareness emerged asthe most important dimension to employees. The results may be utilised bymanagers in the steel industry to identify and direct their attention to the keyoccupational health and safety factors in their different contexts.

Responsible management for Health, Safety and Environment (HSE) in uranium mining and processing, starting from public support

International Nuclear Information System (INIS)

Saint-Pierre, S.

2014-01-01

Seeking, gaining and maintaining public support is inherent to mining and to responsible management in this sector. In particular, it holds special relevance for remote mining sites for which the buy in from the regional and local workforce and populations is a necessity all along the life span of a mining project from exploration to development, commissioning, operation, closure and restoration. This paper briefly highlights some key features to be accounted for nowadays for the successful development, shaping and implementation of mining projects with a view to improve public support. It is essential to address responsible management for health, safety and environment (HSE) in uranium mining and processing through key program elements such as policy; baseline; operational preparation for implementation; monitoring, reporting, review and continued improvements; as well as some insights on site closure and restoration. In particular, examples illustrate how these program elements are implemented in practice in uranium mining and processing. Some emphasis is put on radiation safety as responsible management for the other HSE dimensions tends to be analogous for all mines and mineral processing sites. (author)

Environmental, safety, and health engineering

International Nuclear Information System (INIS)

Woodside, G.; Kocurek, D.

1997-01-01

A complete guide to environmental, safety, and health engineering, including an overview of EPA and OSHA regulations; principles of environmental engineering, including pollution prevention, waste and wastewater treatment and disposal, environmental statistics, air emissions and abatement engineering, and hazardous waste storage and containment; principles of safety engineering, including safety management, equipment safety, fire and life safety, process and system safety, confined space safety, and construction safety; and principles of industrial hygiene/occupational health engineering including chemical hazard assessment, personal protective equipment, industrial ventilation, ionizing and nonionizing radiation, noise, and ergonomics

Design of plant safety model in plant enterprise engineering environment

International Nuclear Information System (INIS)

Gabbar, Hossam A.; Suzuki, Kazuhiko; Shimada, Yukiyasu

2001-01-01

Plant enterprise engineering environment (PEEE) is an approach aiming to manage the plant through its lifecycle. In such environment, safety is considered as the common objective for all activities throughout the plant lifecycle. One approach to achieve plant safety is to embed safety aspects within each function and activity within such environment. One ideal way to enable safety aspects within each automated function is through modeling. This paper proposes a theoretical approach to design plant safety model as integrated with the plant lifecycle model within such environment. Object-oriented modeling approach is used to construct the plant safety model using OO CASE tool on the basis of unified modeling language (UML). Multiple views are defined for plant objects to express static, dynamic, and functional semantics of these objects. Process safety aspects are mapped to each model element and inherited from design to operation stage, as it is naturally embedded within plant's objects. By developing and realizing the plant safety model, safer plant operation can be achieved and plant safety can be assured

Nuclear health and safety

International Nuclear Information System (INIS)

1991-08-01

This paper is a review of environmental and safety programs at facilities in the Naval Reactors Program which shows no basis for allegations that unsafe conditions exist there or that the environment is being harmed by activities conducted there. The prototype reactor design provides safety measures that are consistent with commercial nuclear power plants. Minor incidents affecting safety and the environment have occurred, however, and dents affecting safety and the environment have occurred, however, and as with other nuclear facilities, past activities have caused environmental problems that require ongoing monitoring and vigilance. While the program has historically been exempt from most oversight, some federal and state environmental oversight agencies have recently been permitted access to Naval Reactors facilities for oversight purposes. The program voluntarily cooperates with the Nuclear Regulatory Commission regarding reactor modifications, safety improvements, and component reliability. In addition, the program and its contractors have established an extensive internal oversight program that is geared toward reporting the slightest deviations from requirements or procedures. Given the program's classification policies and requirements, it does not appear that the program routinely overclassifies information to prevent its release to the public or to avoid embarrassment. However, GAO did not some instances in which documents were improperly classified

Psychosocial safety climate as a precursor to conducive work environments, psychological health problems, and employee engagement

OpenAIRE

Dollard, Maureen; Bakker, Arnold

2010-01-01

textabstractWe constructed a model of workplace psychosocial safety climate (PSC) to explain the origins of job demands and resources, worker psychological health, and employee engagement. PSC refers to policies, practices, and procedures for the protection of worker psychological health and safety. Using the job demands-resources framework, we hypothesized that PSC as an upstream organizational resource influenced largely by senior management, would precede the work context (i.e., job demand...

MATURATION PYRAMID OF OCCUPATIONAL HEALTH AND SAFETY

OpenAIRE

Perçin, Fatih; Haydan, Eren

2017-01-01

Occupational Health and Safety System (OHS) isimportant for governments, employers and workers. Recently, OHS program hasdeveloped day by day and tried to secure working environment. For this purpose,it is necessary that the written job security rulesin the workplace should be internalized by employees, and employers, andgovernment system. Workers can comply from the top to the bottom oforganization and contribute to development of rules through their own personalknowledge, experience, and in...

Radiation and nuclear safety included in the environmental health programme

International Nuclear Information System (INIS)

Salomaa, S.

1996-01-01

Finland is currently preparing a national environmental health programme, the objective of which is to chart the main environmental health problems in Finland, to identify means for securing a healthy environment, and to draw up a practical action programme for preventing and rectifying problems pertaining to environmental health. Radiation and nuclear safety form an essential part of preventive health care. The action programme is based on decisions and programmes approved at the WHO Conference on the Environment and Health, held in Helsinki in June 1994. In addition to the state of the Finnish environment and the health of the Finnish population, the programme addresses the relevant international issues, in particular in areas adjacent to Finland. The Committee on Environmental Health is expected to complete its work by the end of the year. A wide range of representatives from various branches of administration have contributed to the preparation of the programme. Besides physical, biological and chemical factors, the environmental factors affecting health also include the physical environment and the psychological, social and aesthetic features of the environment. Similarly, environmental factors that have an impact on the health of present or future generations, on the essential preconditions of life and on the quality of life are investigated. The serious risk to nature caused by human actions is also considered as a potential risk to human health. (orig.)

Bechtel Hanford, Inc./ERC team health and safety plan Environmental Restoration Disposal Facility operations

International Nuclear Information System (INIS)

Turney, S.R.

1996-02-01

A comprehensive safety and health program is essential for reducing work-related injuries and illnesses while maintaining a safe and health work environment. This document establishes Bechtel Hanford, Inc. (BHI)/Environmental Restoration Contractor (ERC) team requirements, policies, and procedures and provides preliminary guidance to the Environmental Restoration Disposal Facility (ERDF) subcontractor for use in preparing essential safety and health documents. This health and safety plan (HASP) defines potential safety and health issues associated with operating and maintaining the ERDF. A site-specific HASP shall be developed by the ERDF subcontractor and shall be implemented before operations and maintenance work can proceed. An activity hazard analysis (AHA) shall also be developed to provide procedures to identify, assess, and control hazards or potential incidents associated with specific operations and maintenance activities

MP-Division health and safety reference handbook. [Contains glossary

Energy Technology Data Exchange (ETDEWEB)

Putnam, T.M.

1987-09-01

This report presents the objectives, organization, policies, and essential rules and procedures that have been adopted by MP Division and that form the basis of the Health and Safety Program of the Clinton P. Anderson Meson Physics Facility (LAMPF). The facility includes the beam-delivery systems for the Los Alamos Neutron Scattering Center and the Weapons Neutron Research Facility (LANSCE/WNR). The program is designed not only to assure the health and safety of all personnel, including users, in their work at LAMPF, and of MP-Division staff in their work on the LANSCE/WNR beam lines, but also to protect the facility (buildings and equipment) and the environment. 33 refs., 18 figs., 2 tabs.

Environment, safety and Health Progress Assessment of the Rocky Flats Plant

International Nuclear Information System (INIS)

1993-05-01

This report documents the result of the US Department of Energy's (DOE) Environment, Safety and Health (ES ampersand H) Progress Assessment of the DOE Rocky Flats Plant (RFP) in Golden, Colorado. The assessment, which was conducted during the period of May 17 through May 28, 1993, included a selective review of the ES ampersand H management systems and programs of the responsible DOE Headquarters Program Offices (Defense Programs (DP) and Environmental Restoration and Waste Management (EM)), the DOE Rocky Flats Office (RFO), and the site contractor, EG ampersand G Rocky Flats, Inc. (EG ampersand G). Despite the near constant state of flux under which RFP has been required to operate, the Progress Assessment Team has concluded that significant progress has been made in correcting the deficiencies identified in the 1989 Assessment and in responding responsibly to regulations, and DOE directives and guidance that have been issued since that time. The Team concluded that the improvements have been concentrated in the activities associated with plutonium facilities and in regulatory driven programs. Much remains to be done with respect to implementing on a sitewide basis those management systems that anchor an organization's pursuit of continuous ES ampersand H improvement. Furthermore the Team concluded that the pace of improvement has been constrained by a combination of factors that have limited the site's ability to manage change in the pursuit of sitewide ES ampersand H excellence

29 CFR 1960.25 - Qualifications of safety and health inspectors and agency inspections.

Science.gov (United States)

2010-07-01

... conditions affecting employee safety and health, coordination of inspection functions is encouraged. ... HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE... shall be conducted by inspectors qualified to recognize and evaluate hazards of the working environment...

Improving health care quality and safety: the role of collective learning.

Science.gov (United States)

Singer, Sara J; Benzer, Justin K; Hamdan, Sami U

2015-01-01

Despite decades of effort to improve quality and safety in health care, this goal feels increasingly elusive. Successful examples of improvement are infrequently replicated. This scoping review synthesizes 76 empirical or conceptual studies (out of 1208 originally screened) addressing learning in quality or safety improvement, that were published in selected health care and management journals between January 2000 and December 2014 to deepen understanding of the role that collective learning plays in quality and safety improvement. We categorize learning activities using a theoretical model that shows how leadership and environmental factors support collective learning processes and practices, and in turn team and organizational improvement outcomes. By focusing on quality and safety improvement, our review elaborates the premise of learning theory that leadership, environment, and processes combine to create conditions that promote learning. Specifically, we found that learning for quality and safety improvement includes experimentation (including deliberate experimentation, improvisation, learning from failures, exploration, and exploitation), internal and external knowledge acquisition, performance monitoring and comparison, and training. Supportive learning environments are characterized by team characteristics like psychological safety, appreciation of differences, openness to new ideas social motivation, and team autonomy; team contextual factors including learning resources like time for reflection, access to knowledge, organizational capabilities; incentives; and organizational culture, strategy, and structure; and external environmental factors including institutional pressures, environmental dynamism and competitiveness and learning collaboratives. Lastly learning in the context of quality and safety improvement requires leadership that reinforces learning through actions and behaviors that affect people, such as coaching and trust building, and through

Girlfriends' Health and Safety Tips

Science.gov (United States)

... in Women? Women's Safety and Health Issues at Work Health Equity Girlfriends' Health and Safety Tips Recommend on Facebook Tweet Share Compartir Having friends is an important part of life. Celebrate female friendship and support your girlfriends by ...

The picture of health: examining school-based health environments through photographs.

Science.gov (United States)

Kontak, Julia C H; McIsaac, Jessie-Lee D; Penney, Tarra L; Kuhle, Stefan; Kirk, Sara F L

2017-04-01

Health-promoting schools (HPS) is an effective approach to enhance the health and well-being of children and youth, but its measurement remains a challenge considering contextual differences across school environments. The purpose of this study was to qualitatively explore the physical features of the school environment through photographs of schools that had implemented an HPS approach compared with schools that had not. This study used a descriptive approach, wherein physical features of the school environment were distilled through visual images and qualitatively analyzed. School environment data were collected from 18 elementary schools (10 HPS, 8 comparison schools) from a school board in rural Nova Scotia (Canada). Evaluation assistants captured photographs of the physical school environment as part of a broader environment audit. Overarching themes included the promotion, access and availability of opportunities for healthy eating and physical activity, healthy school climate and safety and accessibility of the school. The photographs characterized diverse aspects of the school environment and revealed differences between schools that had implemented an HPS approach compared with schools that had not. There were increased visual cues to support healthy eating, physical activity and mental well-being, and indications of a holistic approach to health among schools that implemented an HPS approach. This research adds to understanding the environmental elements of HPS. The use of photographic data to understand school environments provided an innovative method to explore the physical features of schools that had implemented an HPS approach. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

DOE standard: Integration of environment, safety, and health into facility disposition activities. Volume 2: Appendices

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-05-01

This volume contains the appendices that provide additional environment, safety, and health (ES and H) information to complement Volume 1 of this Standard. Appendix A provides a set of candidate DOE ES and H directives and external regulations, organized by hazard types that may be used to identify potentially applicable directives to a specific facility disposition activity. Appendix B offers examples and lessons learned that illustrate implementation of ES and H approaches discussed in Section 3 of Volume 1. Appendix C contains ISMS performance expectations to guide a project team in developing and implementing an effective ISMS and in developing specific performance criteria for use in facility disposition. Appendix D provides guidance for identifying potential Applicable or Relevant and Appropriate Requirements (ARARs) when decommissioning facilities fall under the Comprehensive Environmental Response, Compensation, Liability Act (CERCLA) process. Appendix E discusses ES and H considerations for dispositioning facilities by privatization. Appendix F is an overview of the WSS process. Appendix G provides a copy of two DOE Office of Nuclear Safety Policy and Standards memoranda that form the bases for some of the guidance discussed within the Standard. Appendix H gives information on available hazard analysis techniques and references. Appendix I provides a supplemental discussion to Sections 3.3.4, Hazard Baseline Documentation, and 3.3.6, Environmental Permits. Appendix J presents a sample readiness evaluation checklist.

DOE standard: Integration of environment, safety, and health into facility disposition activities. Volume 2: Appendices

International Nuclear Information System (INIS)

1998-05-01

This volume contains the appendices that provide additional environment, safety, and health (ES and H) information to complement Volume 1 of this Standard. Appendix A provides a set of candidate DOE ES and H directives and external regulations, organized by hazard types that may be used to identify potentially applicable directives to a specific facility disposition activity. Appendix B offers examples and lessons learned that illustrate implementation of ES and H approaches discussed in Section 3 of Volume 1. Appendix C contains ISMS performance expectations to guide a project team in developing and implementing an effective ISMS and in developing specific performance criteria for use in facility disposition. Appendix D provides guidance for identifying potential Applicable or Relevant and Appropriate Requirements (ARARs) when decommissioning facilities fall under the Comprehensive Environmental Response, Compensation, Liability Act (CERCLA) process. Appendix E discusses ES and H considerations for dispositioning facilities by privatization. Appendix F is an overview of the WSS process. Appendix G provides a copy of two DOE Office of Nuclear Safety Policy and Standards memoranda that form the bases for some of the guidance discussed within the Standard. Appendix H gives information on available hazard analysis techniques and references. Appendix I provides a supplemental discussion to Sections 3.3.4, Hazard Baseline Documentation, and 3.3.6, Environmental Permits. Appendix J presents a sample readiness evaluation checklist

National ignition facility environment, safety, and health management plan

International Nuclear Information System (INIS)

1995-11-01

The ES ampersand H Management Plan describes all of the environmental, safety, and health evaluations and reviews that must be carried out in support of the implementation of the National Ignition Facility (NIF) Project. It describes the policy, organizational responsibilities and interfaces, activities, and ES ampersand H documents that will be prepared by the Laboratory Project Office for the DOE. The only activity not described is the preparation of the NIF Project Specific Assessment (PSA), which is to be incorporated into the Programmatic Environmental Impact Statement for Stockpile Stewardship and Management (PEIS). This PSA is being prepared by Argonne National Laboratory (ANL) with input from the Laboratory participants. As the independent NEPA document preparers ANL is directly contracted by the DOE, and its deliverables and schedule are agreed to separately with DOE/OAK

Environment and safety research status report: 1993

International Nuclear Information System (INIS)

1993-03-01

The 1993 status report discusses ongoing and planned research activities in the GRI Environment and Safety Program. The objectives and goals, accomplishments, and strategy along with the basis for each project area are presented for the supply, end use, and gas operations subprograms. Within the context of these subprograms, contract status summaries under their conceptual titles are given for the following project areas: Gas Supply Environmental and Safety Research, Air Quality Research, End Use Equipment Safety Research, Gas Operations Safety Research, Liquefied Natural Gas, Safety Research, and Gas Operations Environmental Research

Participatory/problem-based methods and techniques for training in health and safety.

Science.gov (United States)

Rosskam, E

2001-01-01

More knowledgeable and trained people are needed in the area of occupational health, safety, and environment (OSHE) if work-related fatalities, accidents, and diseases are to be reduced. Established systems have been largely ineffective, with few employers taking voluntary measures to protect workers and the environment and too few labor inspectors available. Training techniques using participatory methods and a worker empowerment philosophy have proven value. There is demonstrated need for the use of education for action, promoting the involvement of workers in all levels of decision-making and problem-solving in the workplace. OSH risks particular to women s jobs are virtually unstudied and not addressed at policy levels in most countries. Trade unions and health and safety professionals need to demystify technical areas, empower workers, and encourage unions to dedicate special activities around women s jobs. Trained women are excellent motivators and transmitters of safety culture. Particular emphasis is given to train-the-trainer approaches.

Sixth ITER technical meeting on safety and environment

International Nuclear Information System (INIS)

Saji, G.; Baker, D.

1997-01-01

The article summarizes the topics of the Sixth Technical Meeting on Safety and Environment which was held to review the first draft of the Non-Site Specific Safety Report (NSSR-2) and the draft of the ITER Final Design Report Safety Assessment (FDR-Safety) during October 27 - November 4, 1997 at the ITER San Diego Joint Work Site

Nuclear health and safety

International Nuclear Information System (INIS)

1990-04-01

This report summarizes the responsiveness of DOE and contractors to findings contained in DOE technical safety appraisals and environmental surveys. These appraisals and surveys have been done at DOE facilities and sites to find out the extent of the environmental, safety, and health problems and to prioritize them for corrective action. As of January 1990, DOE computer data showed over 1,700 safety and health problems and almost 1,300 environmental problems. The majority of these problems, however, have not yet been corrected. GAO also looked at the extent to which DOE has developed a computerized tracking system to monitor the status of its environmental, safety, and health problems. GAO found that the computer system lacks important information, such as various field office and independent appraisals. Inclusion of this information would provide a more complete picture of the problems at the site

A Qualitative Comparison of Susceptibility and Behavior in Recreational and Occupational Risk Environments: Implications for Promoting Health and Safety.

Science.gov (United States)

Haas, Emily Joy; Mattson, Marifran

2016-06-01

Although internal factors that influence risk are frequently studied to understand human behavior, external factors, including social, cultural, and institutional factors, should be better utilized to inform ways to efficiently target, tailor, and promote safety messaging to at-risk populations. Semi-structured interviews obtained data from 37 motorcyclists and 18 mineworkers about their risk perceptions and behaviors within their respective dynamic environments. A comparative thematic analysis revealed information about external factors that influence risk perceptions and behaviors. Results support the importance of qualitative approaches for assessing and targeting individuals' risk perceptions and behaviors. In addition, segmenting at-risk subgroups within target populations and tailoring messages for these at-risk groups is critical for safety behavior modification. Practitioners should utilize strategic, culture-centric risk communication that takes into account external factors when determining when, who, and what to communicate via health promotion activities to more accurately disseminate valid, empathetic, and engaging communication with a higher level of fidelity.

Management capacity to promote nurse workplace health and safety.

Science.gov (United States)

Fang, Yaxuan; McDonald, Tracey

2018-04-01

To investigate regarding workplace health and safety factors, and to identify strategies to preserve and promote a healthy nursing workplace. Data collected using the Delphi technique with input from 41 key informants across four participant categories drawn from a Chinese university and four hospitals were thematically analysed. Most respondents agreed on the importance of nurses' health and safety, and that nurse managers should act to protect nurses, but not enough on workplace safety. Hospital policies, staff disempowerment, workload and workplace conflicts are major obstacles. The reality of Chinese nurses' workplaces is that health and safety risks abound and relate to socio-cultural expectations of women. Self-management of risks is neccessary, gaps exist in understanding of workplace risks among different nursing groups and their perceptions of the professional status, and the value of nurses' contribution to ongoing risks in the hospital workplace. The Chinese hospital system must make these changes to produce a safer working environment for nurses. This research, based in China, presents an instructive tale for all countries that need support on the types and amounts of management for nurses working at the clinical interface, and on the consequences of management neglect of relevant policies and procedures. © 2017 John Wiley & Sons Ltd.

Economic Techniques of Occupational Health and Safety Management

Science.gov (United States)

Sidorov, Aleksandr I.; Beregovaya, Irina B.; Khanzhina, Olga A.

2016-10-01

The article deals with the issues on economic techniques of occupational health and safety management. Authors’ definition of safety management is given. It is represented as a task-oriented process to identify, establish and maintain such a state of work environment in which there are no possible effects of hazardous and harmful factors, or their influence does not go beyond certain limits. It was noted that management techniques that are the part of the control mechanism, are divided into administrative, organizational and administrative, social and psychological and economic. The economic management techniques are proposed to be classified depending on the management subject, management object, in relation to an enterprise environment, depending on a control action. Technoeconomic study, feasibility study, planning, financial incentives, preferential crediting of enterprises, pricing, profit sharing and equity, preferential tax treatment for enterprises, economic regulations and standards setting have been distinguished as economic techniques.

OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT IN ROMANIA IN VIEW OF THE ECONOMIC DEVELOPMENT OF SOCIETY

Directory of Open Access Journals (Sweden)

Rusu-Zagar Gilda

2013-07-01

Full Text Available Health and safety at work has become one of the most substantial and important sectors in the EU social policy over the last years.In Romania, the implementation of health and safety management systems is performed by: a systematic approach to problems, training and awareness, effective and efficient tools for managing a company's specific issues as well as involvement at all its organizational levels.The article deals with the implementation of the management systems for health and safety at work, which complements the enterprises' existing organizational system and promotes enforcement of the legislation regarding health and safety at work.Creating a healthier and safer working environment is a goal that exceeds the resources and expertise of a single institution or a single country.

Work environment and health promotion needs among personnel in the faculty of medicine, Thammasat university.

Science.gov (United States)

Buranatrevedh, Surasak

2013-04-01

Work environment and health promotion needs are important factors for quality of life of workers. Study occupational health and safety hazards and control measures as well as health status and health promotion needs among personnel in Faculty of Medicine, Thammasat University. This was a cross sectional study. Questionnaires were designed to collect demographic data, health status, health promotion needs, occupational health and safety hazards, and job demand/control data. Questionnaires were sent out to 181 personnel and 145 were returned filled-out (80.1%). Among them, 42.8% had physical illness or stress, 68.3% had debt problem, 20% had some problems with coworker or work environment, 65.5% had a high workload, and 64.1% felt they did not get enough work benefits. Job demand and control factors included attention from leaders, fast-pace work, relationship among coworkers, repetitive work, hard work, high stress work, and high workload The occupational safety and health system included training to use new equipment, supervisor training, work skill training, work in sitting position for long period of time, appropriate periodic health exam, appropriate medical service, proper canteen, proper salary raise, and facilities for health promotion. In the occupational health hazards, employees were working in low temperature, bright light, and had a lack of health promotion programs. Requested programs to improve quality of life were Thai traditional massage, workplace improvement, health promotion, one-day travel, and Friday's happy and healthy program. Results from the present study can be used to improve workplace environment and health of personnel in the Faculty of Medicine, Thammasat University.

Occupational Safety and Health Administration

Science.gov (United States)

... Twitter Instagram RSS Subscribe Occupational Safety and Health Administration English | Spanish MENU OSHA English | Spanish Search A ... STATES DEPARTMENT OF LABOR Occupational Safety and Health Administration 200 Constitution Ave., NW, Washington, DC 20210 800- ...

Classification of antecedents towards safety use of health information technology: A systematic review.

Science.gov (United States)

Salahuddin, Lizawati; Ismail, Zuraini

2015-11-01

This paper provides a systematic review of safety use of health information technology (IT). The first objective is to identify the antecedents towards safety use of health IT by conducting systematic literature review (SLR). The second objective is to classify the identified antecedents based on the work system in Systems Engineering Initiative for Patient Safety (SEIPS) model and an extension of DeLone and McLean (D&M) information system (IS) success model. A systematic literature review (SLR) was conducted from peer-reviewed scholarly publications between January 2000 and July 2014. SLR was carried out and reported based on the preferred reporting items for systematic reviews and meta-analyses (PRISMA) statement. The related articles were identified by searching the articles published in Science Direct, Medline, EMBASE, and CINAHL databases. Data extracted from the resultant studies included are to be analysed based on the work system in Systems Engineering Initiative for Patient Safety (SEIPS) model, and also from the extended DeLone and McLean (D&M) information system (IS) success model. 55 articles delineated to be antecedents that influenced the safety use of health IT were included for review. Antecedents were identified and then classified into five key categories. The categories are (1) person, (2) technology, (3) tasks, (4) organization, and (5) environment. Specifically, person is attributed by competence while technology is associated to system quality, information quality, and service quality. Tasks are attributed by task-related stressor. Organisation is related to training, organisation resources, and teamwork. Lastly, environment is attributed by physical layout, and noise. This review provides evidence that the antecedents for safety use of health IT originated from both social and technical aspects. However, inappropriate health IT usage potentially increases the incidence of errors and produces new safety risks. The review cautions future

The Safety Analysis of Shipborne Ammunition in Fire Environment

Science.gov (United States)

Ren, Junpeng; Wang, Xudong; Yue, Pengfei

2017-12-01

The safety of Ammunition has always been the focus of national military science and technology issues. And fire is one of the major safety threats to the ship’s ammunition storage environment, In this paper, Mk-82 shipborne aviation bomb has been taken as the study object, simulated the whole process of fire by using the FDS (Fire Detection System) software. According to the simulation results of FDS, ANSYS software was used to simulate the temperature field of Mk-82 carrier-based aviation bomb under fire environment, and the safety of aviation bomb in fire environment was analyzed. The result shows that the aviation bombs under the fire environment can occur the combustion or explosion after 70s constant cook-off, and it was a huge threat to the ship security.

Health effects of radiation and the implications for radiation safety

International Nuclear Information System (INIS)

Gonzalez, A.J.; Anderer, J.

1991-01-01

In this Paper two elements of a multiphase analysis of radiation exposures in the living environment - the human health effects of ionizing radiation and the implications for radiation safety policy and practices - are presented. Part 1 draws together the current state of scientific knowledge and insight about the human health effects of radiation, describing these in terms of known cause-related deterministic effects and of the estimated incidence of stochastic effects as defined by biostatistics and biological models. The 1988 UNSCEAR report provides an authoritative basis for such an examination. Part 2 explores some of the major implications that the state-of-the-art of radiation biology has - or should have - for radiation safety policy and practices. (author)

Growth of safety, health and environmental consciousness amongst IREL units for all round development

International Nuclear Information System (INIS)

Das, A.K.

2005-01-01

Indian Rare Earths Limited (IREL) has four operating plants located at Chatrapur in Orissa, Chavara, Udyogamandal in Kerala and Manavalakurichi in Tamilnadu engaged in production of beach sand minerals viz. ilmenite, rutile, zircon, monazite and garnet etc. and value added products like rare earths chemicals and thorium nitrate etc.. The mission of IREL is to be a major supplier of beach sand minerals and rare earths compounds in the domestic and international market as well as produce value added materials of strategic importance with due regard to resource utilization, safety and environmental protection. Success of safety programme in such industrial activities depends on the co-operation among all level of employees and through team efforts. Industrial safety is not only crucial for protection of workforce but also for the increased productivity. The Company has experienced and qualified professionals in safety, environment and occupational health. They are continuously striving to achieve excellence in the status of safety, health and environment. Surveillance of IREL plants is undertaken by regulatory/statutory authorities like Atomic Energy Regulatory Board (AERB), Director General of Mines Safety (DGMS), State Pollution Control Board (SPCB), etc

Systems engineered health and safety criteria for safety analysis reports

International Nuclear Information System (INIS)

Beitel, G.A.; Morcos, N.

1993-01-01

The world of safety analysis is filled with ambiguous words: codes and standards, consequences and risks, hazard and accident, and health and safety. These words have been subject to disparate interpretations by safety analysis report (SAR) writers, readers, and users. open-quotes Principal health and safety criteriaclose quotes has been one of the most frequently misused phrases; rarely is it used consistently or effectively. This paper offers an easily understood definition for open-quotes principal health and safety criteriaclose quotes and uses systems engineering to convert an otherwise mysterious topic into the primary means of producing an integrated SAR. This paper is based on SARs being written for environmental restoration and waste management activities for the U.S. Department of Energy (DOE). Requirements for these SARs are prescribed in DOE Order 5480-23, open-quotes Nuclear Safety Analysis Reports.close quotes

A model for managing cold-related health and safety risks at workplaces.

Science.gov (United States)

Risikko, Tanja; Mäkinen, Tiina M; Påsche, Arvid; Toivonen, Liisa; Hassi, Juhani

2003-05-01

Cold conditions increase health and safety risks at work in several ways. The effects of cold have not been sufficiently taken into consideration in occupational safety and health practices. A systematic model and methods were developed for managing cold-related health and safety risks at workplaces. The development work was performed, in a context-bound manner, in pilot industries and workplaces. The model can be integrated into the company's occupational health and safety management system, such as OHSAS 18001. The cold risks are identified and assessed by using a checklist. The preventive measures are systematically planned in a written form specifically produced for cold workplaces. It includes the organisational and technical preventive measures, protective clothing and personal protective equipment, as well as training and information of the personnel. According to the model, all the workers, foremen, occupational safety personnel and occupational health care personnel are trained to recognise the cold risks and to conduct preventive actions. The developed model was evaluated in the context of cold outdoor (construction) and indoor work (fish processing), and by occupational health and safety professionals. According to the feedback, the model and methods were easy to use after a one-day introduction session. The continuum between the cold risk assessment and management worked well, although there was some overlap in the documentation. The cold risk management model and its methods form an essential part of ISO CD 15743 Strategy for risk assessment, management and work practice in cold environments.

Integration of radiation protection in occupational health and safety managementsystems - legal requirements and practical realization at the example of the Fraunhofer occupational health and safety management system FRAM

International Nuclear Information System (INIS)

Lambotte, S.; Severitt, S.; Weber, U.

2002-01-01

The protection of the employees, the people and the environment for the effects of radiation is regulated by numerous laws and rules set by the government and the occupational accident insurances. Primarily these rules apply for the responsibles, normally the employer, as well as for the safety officers. Occupational safety management systems can support these people to carry out their tasks and responsibilities effectively. Also, a systematic handling of the organisation secures that the numerous duties of documentation, time-checking of the proof-lists and dates are respected. Further more, the legal certainty for the responsibles and safety officers will be raised and the occupational, environment, radiation and health protection will be promoted. At the example of the Fraunhofer occupational safety management system (FrAM) it is demonstrated, how radiation protection (ionizing radiation) can be integrated in a progressive intranet supported management system. (orig.)

Safety and health annual report 1996

International Nuclear Information System (INIS)

1997-01-01

The 1996 report on the Health and Safety performance of the nuclear fuel cycle company BNFL at its sites in the United Kingdom demonstrates a continuing improvement. The site locations and developments are briefly described and international developments in subsidiary organisations noted. Other sections of the report cover health and safety policy, radiological and industrial safety, emergency planning, incidents, occupational health services, compensation scheme developments, transport, putting radiation in perspective, and safety and health research. Data are provided on: radioactive discharges; industrial safety of BNFL and contractors' employees; radiation dose summaries for BNFL and contractors' employees. There is evidence of the expected plateauing out of doses to BNFL employees at a level less than or similar to background radiation. (UK)

Current status of environmental, health, and safety issues of nickel metal-hydride batteries for electric vehicles

Energy Technology Data Exchange (ETDEWEB)

Corbus, D; Hammel, C J; Mark, J

1993-08-01

This report identifies important environment, health, and safety issues associated with nickel metal-hydride (Ni-MH) batteries and assesses the need for further testing and analysis. Among the issues discussed are cell and battery safety, workplace health and safety, shipping requirements, and in-vehicle safety. The manufacture and recycling of Ni-MH batteries are also examined. This report also overviews the ``FH&S`` issues associated with other nickel-based electric vehicle batteries; it examines venting characteristics, toxicity of battery materials, and the status of spent batteries as a hazardous waste.

Current status of environmental, health, and safety issues of nickel metal-hydride batteries for electric vehicles

International Nuclear Information System (INIS)

Corbus, D.; Hammel, C.J.; Mark, J.

1993-08-01

This report identifies important environment, health, and safety issues associated with nickel metal-hydride (Ni-MH) batteries and assesses the need for further testing and analysis. Among the issues discussed are cell and battery safety, workplace health and safety, shipping requirements, and in-vehicle safety. The manufacture and recycling of Ni-MH batteries are also examined. This report also overviews the ''FH ampersand S'' issues associated with other nickel-based electric vehicle batteries; it examines venting characteristics, toxicity of battery materials, and the status of spent batteries as a hazardous waste

Overview of a radiation safety program in a district style medical environment

International Nuclear Information System (INIS)

Wilson, G.

2006-01-01

This paper provides an overview of the eight components of a radiation safety program in a large health care facility spread out over several campuses in a large geographic area in Nova Scotia. The main focus is based on those areas that are regulated by the Canadian Nuclear Safety Commission and generally encompass nuclear medicine and radiation therapy operations. X-ray operations are regulated provincially, but the general operational principles of an effective radiation safety program can be applied in all these areas. The main components covered include the set up of an organizational structure that operates separately from individual departments, general items expected from reports to corporate management or regulators, and some examples of the front-line expectations for those in individual departments. The review is not all encompassing, but should give organizations some insight of the magnitude of a radiation safety program in a district style environment. (author)

Measuring School Climate in High Schools: A Focus on Safety, Engagement, and the Environment

Science.gov (United States)

Bradshaw, Catherine P.; Waasdorp, Tracy E.; Debnam, Katrina J.; Johnson, Sarah Lindstrom

2014-01-01

Background: School climate has been linked to multiple student behavioral, academic, health, and social-emotional outcomes. The US Department of Education (USDOE) developed a 3-factor model of school climate comprised of safety, engagement, and environment. This article examines the factor structure and measurement invariance of the USDOE model.…

Environment and safety: major goals for MARS

International Nuclear Information System (INIS)

Maninger, R.C.

1983-01-01

The Mirror Advanced Reactor Study (MARS) is a conceptual design study for a commercial fusion power reactor. One of the major goals of MARS is to develop design guidance so that fusion reactors can meet reasonable expectations for environmental health and safety. One of the first steps in the assessment of health and safety requirements was to examine what the guidelines might be for health and safety in disposal of radioactive wastes from fusion reactors. Then, using these quidelines as criteria, the impact of materials selection upon generation of radioactive wastes through neutron activation of structural materials was investigated. A conclusion of this work is that fusion power systems may need substantial engineering effort in new materials development and selection to meet the probable publicly acceptable levels of radioactivity for waste disposal in the future

Vitamin G: effects of green space on health, well-being, and social safety

NARCIS (Netherlands)

Groenewegen, P.P.; Berg, van den A.E.; Vries, de S.; Verheij, R.A.

2006-01-01

Background: Looking out on and being in the green elements of the landscape around us seem to affect health, well-being and feelings of social safety. This article discusses the design of a research program on the effects of green space in the living environment on health, well-being and social

Relationship between Risk Assessment and Compliance to Health and Safety in Ugandan Secondary Schools

Science.gov (United States)

Sekiwu, Denis; Kabanda, Milly; Naluwemba, Esther Frances; Kaggwa, Victoria Tamale

2015-01-01

Health hazards are part and parcel of human life necessitating the provision of safety in every organizational environment (WHO regional Office for Africa, 2004). Likewise, the area of safety and accident prevention is of great concern to school improvement. The study sought to investigate the relationship between Risk Assessment and Compliancy to…

Farm Health and Safety

Science.gov (United States)

... the United States. Farms have many health and safety hazards, including Chemicals and pesticides Machinery, tools and ... inspection and maintenance can help prevent accidents. Using safety gloves, goggles and other protective equipment can also ...

Aviation’s Normal Operations Safety Audit: a safety management and educational tool for health care? Results of a small-scale trial

Directory of Open Access Journals (Sweden)

Bennett SA

2017-08-01

Full Text Available Simon A Bennett Civil Safety and Security Unit, School of Business, University of Leicester, Leicester, UK Background: A National Health Service (NHS contingent liability for medical error claims of over £26 billion. Objectives: To evaluate the safety management and educational benefits of adapting aviation’s Normal Operations Safety Audit (NOSA to health care. Methods: In vivo research, a NOSA was performed by medical students at an English NHS Trust. After receiving training from the author, the students spent 6 days gathering data under his supervision. Results: The data revealed a threat-rich environment, where errors – some consequential – were made (359 threats and 86 errors were recorded over 2 weeks. The students claimed that the exercise improved their observational, investigative, communication, teamworking and other nontechnical skills. Conclusion: NOSA is potentially an effective safety management and educational tool for health care. It is suggested that 1 the UK General Medical Council mandates that all medical students perform a NOSA in fulfillment of their degree; 2 the participating NHS Trusts be encouraged to act on students’ findings; and 3 the UK Department of Health adopts NOSA as a cornerstone risk assessment and management tool. Keywords: aviation, safety audit, health care, management benefits, educational benefits

Restructuring of University Laboratories within the Scope of Occupational Health and Safety

OpenAIRE

Ordu, Kamil Musa; Çivi Bilir, Gülçin

2018-01-01

Laboratory safety is major of importance tooccupational health and safety, which manages, and responds to all issues andconcerns surrounding physical, biological, ergonomic, electrical, chemical, andother standard operating procedures. In this work, laboratory design and equipment,which are arranged according to precautions that are taken against to allhazards regarding to work environment or personal expose at the workenvironments in laboratories that are already exist or will be established...

Technology Development, Evaluation, and Application (TDEA) FY 1998 Progress Report Environment, Safety, and Health (ESH) Division

Energy Technology Data Exchange (ETDEWEB)

Larry G. Hoffman; Kenneth Alvar; Thomas Buhl; Bruce Erdal; Philip Fresquez; Elizabeth Foltyn; Wayne Hansen; Bruce Reinert

1999-06-01

This progress report presents the results of 10 projects funded ($504K) in FY98 by the Technology Development, Evaluation, and Application (TDEA) Committee of the Environment, Safety, and Health Division. Nine projects are new for this year; two projects were completed in their third and final TDEA-funded year. As a result of their TDEA-funded projects, investigators have published 19 papers in professional journals, proceedings, or Los Alamos reports and presented their work at professional meetings. Supplemental funds and in-kind contributions, such as staff time, instrument use, and work space were also provided to the TDEA-funded projects by organizations external to ESH Division. Products generated from the projects funded in FY98 included a new extremity dosimeter that replaced the previously used finger-ring dosimeters, a light and easy-to-use detector to measure energy deposited by neutron interactions, and a device that will allow workers to determine the severity of a hazard.

National Institute for Occupational Safety and Health

Science.gov (United States)

... Submit Search The CDC The National Institute for Occupational Safety and Health (NIOSH) Note: Javascript is disabled or is not ... and Events NIOSH Contact Information Related Federal Agencies Occupational Safety and Health Administration Mine Safety and Health Administration Follow NIOSH ...

Safety issues and updates under MR environments

Energy Technology Data Exchange (ETDEWEB)

Kim, Soo Jung; Kim, Kyung Ah, E-mail: bellenina@daum.net

2017-04-15

Highlights: • Unexpected biological effects can occur within stronger magnetic fields. • MR safety for MR conditional items is not guaranteed beyond the tested conditions. • Updated knowledge about MR-related safety is important for a safe MR environment. - Abstract: Magnetic resonance (MR) imaging is a useful imaging tool with superior soft tissue contrast for diagnostic evaluation. The MR environments poses unique risks to patients and employees differently from ionizing radiation exposure originated from computed tomography and plain x-ray films. The technology associated with MR system has evolved continuously since its introduction in the late 1970s. MR systems have advanced with static magnetic fields, faster and stronger gradient magnetic fields and more powerful radiofrequency transmission coils. Higher field strengths of MR offers greater signal to noise capability and better spatial resolution, resulting in better visualization of anatomic detail, with a reduction in scan time. With the rapid evolution of technology associated with MR, we encounter new MR-related circumstances and unexpected dangerous conditions. A comprehensive update of our knowledge about MR safety is necessary to prevent MR-related accidents and to ensure safety for patients and staff associated with MR. This review presents an overview about MR-related safety issues and updates.

Strategies for effective management of health and safety in confined site construction

Directory of Open Access Journals (Sweden)

John Spillane

2013-12-01

Full Text Available Purpose: The overall aim of this research is to identify and catalogue the numerous managerial strategies for effective management of health and safety on a confined, urban, construction site. Design/Methodology/Approach: This is achieved by utilising individual interviews, focus groups discussion on selected case studies of confined construction sites, coupled with a questionnaire survey. Findings: The top five key strategies include (1 Employ safe system of work plans to mitigate personnel health and safety issues; (2 Inform personnel, before starting on-site, of the potential issues using site inductions; (3 Effective communication among site personnel; (4 Draft and implement an effective design site layout prior to starting on-site; and (5 Use of banksman (traffic co-ordinator to segregate personnel from vehicular traffic. Practical Implication: The construction sector is one of the leading industries in accident causation and with the continued development and regeneration of our urban centres, confined site construction is quickly becoming the norm - an environment which only fuels accident creation within the construction sector. Originality/Value: This research aids on-site management that requires direction and assistance in the identification and implementation of key strategies for the management of health and safety, particularly in confined construction site environments.

Foundational workplace safety and health competencies for the emerging workforce☆

Science.gov (United States)

Okun, Andrea H.; Guerin, Rebecca J.; Schulte, Paul A.

2016-01-01

Introduction Young workers (aged 15–24) suffer disproportionately from workplace injuries, with a nonfatal injury rate estimated to be two times higher than among workers age 25 or over. These workers make up approximately 9% of the U.S. workforce and studies have shown that nearly 80% of high school students work at some point during high school. Although young worker injuries are a pressing public health problem, the critical knowledge and skills needed to prepare youth for safe and healthy work are missing from most frameworks used to prepare the emerging U.S. workforce. Methods A framework of foundational workplace safety and health knowledge and skills (the NIOSH 8 Core Competencies)was developed based on the Health Belief Model (HBM). Results The proposed NIOSH Core Competencies utilize the HBM to provide a framework for foundational workplace safety and health knowledge and skills. An examination of how these competencies and the HBM apply to actions that workers take to protect themselves is provided. The social and physical environments that influence these actions are also discussed. Conclusions The NIOSH 8 Core Competencies, grounded in one of the most widely used health behavior theories, fill a critical gap in preparing the emerging U.S. workforce to be cognizant of workplace risks. Practical applications Integration of the NIOSH 8 Core Competencies into school curricula is one way to ensure that every young person has the foundational workplace safety and health knowledge and skills to participate in, and benefit from, safe and healthy work. National Safety Council and Elsevier Ltd. All rights reserved. PMID:27846998

One Health in food safety and security education: Subject matter outline for a curricular framework.

Science.gov (United States)

Angelos, John A; Arens, Amanda L; Johnson, Heather A; Cadriel, Jessica L; Osburn, Bennie I

2017-06-01

Educating students in the range of subjects encompassing food safety and security as approached from a One Health perspective requires consideration of a variety of different disciplines and the interrelationships among disciplines. The Western Institute for Food Safety and Security developed a subject matter outline to accompany a previously published One Health in food safety and security curricular framework. The subject matter covered in this outline encompasses a variety of topics and disciplines related to food safety and security including effects of food production on the environment. This subject matter outline should help guide curriculum development and education in One Health in food safety and security and provides useful information for educators, researchers, students, and public policy-makers facing the inherent challenges of maintaining and/or developing safe and secure food supplies without destroying Earth's natural resources.

One Health in food safety and security education: Subject matter outline for a curricular framework

Directory of Open Access Journals (Sweden)

John A. Angelos

2017-06-01

Full Text Available Educating students in the range of subjects encompassing food safety and security as approached from a One Health perspective requires consideration of a variety of different disciplines and the interrelationships among disciplines. The Western Institute for Food Safety and Security developed a subject matter outline to accompany a previously published One Health in food safety and security curricular framework. The subject matter covered in this outline encompasses a variety of topics and disciplines related to food safety and security including effects of food production on the environment. This subject matter outline should help guide curriculum development and education in One Health in food safety and security and provides useful information for educators, researchers, students, and public policy-makers facing the inherent challenges of maintaining and/or developing safe and secure food supplies without destroying Earth's natural resources.

LANL Safety Conscious Work Environment (SCWE) Self-Assessment

Energy Technology Data Exchange (ETDEWEB)

Hargis, Barbara C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2014-01-29

On December 21, 2012 Secretary of Energy Chu transmitted to the Defense Nuclear Facilities Safety Board (DNFSB) revised commitments on the implementation plan for Safety Culture at the Waste Treatment and Immobilization Plant. Action 2-5 was revised to require contractors and federal organizations to complete Safety Conscious Work Environment (SCWE) selfassessments and provide reports to the appropriate U.S. Department of Energy (DOE) - Headquarters Program Office by September 2013. Los Alamos National Laboratory (LANL) planned and conducted a Safety Conscious Work Environment (SCWE) Self-Assessment over the time period July through August, 2013 in accordance with the SCWE Self-Assessment Guidance provided by DOE. Significant field work was conducted over the 2-week period August 5-16, 2013. The purpose of the self-assessment was to evaluate whether programs and processes associated with a SCWE are in place and whether they are effective in supporting and promoting a SCWE.

Monitoring product safety in the postmarketing environment.

Science.gov (United States)

Sharrar, Robert G; Dieck, Gretchen S

2013-10-01

The safety profile of a medicinal product may change in the postmarketing environment. Safety issues not identified in clinical development may be seen and need to be evaluated. Methods of evaluating spontaneous adverse experience reports and identifying new safety risks include a review of individual reports, a review of a frequency distribution of a list of the adverse experiences, the development and analysis of a case series, and various ways of examining the database for signals of disproportionality, which may suggest a possible association. Regulatory agencies monitor product safety through a variety of mechanisms including signal detection of the adverse experience safety reports in databases and by requiring and monitoring risk management plans, periodic safety update reports and postauthorization safety studies. The United States Food and Drug Administration is working with public, academic and private entities to develop methods for using large electronic databases to actively monitor product safety. Important identified risks will have to be evaluated through observational studies and registries.

Zagazig Journal of Occupational Health and Safety

African Journals Online (AJOL)

Zagazig Journal of Occupational Health and Safety is aimed at physicians and researchers in the wide-ranging discipline of occupational and environmental health and safety. The field is devoted to the diagnosis, prevention, management and scientific analysis of occupational , environmental and safety health problems; ...

76 FR 71345 - Patient Safety Organizations: Voluntary Relinquishment From Child Health Patient Safety...

Science.gov (United States)

2011-11-17

... Organizations: Voluntary Relinquishment From Child Health Patient Safety Organization, Inc. AGENCY: Agency for... notification of voluntary relinquishment from Child Health Patient Safety Organization, Inc. of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety...

Occuptional Health and Safety and Employer Motivation

DEFF Research Database (Denmark)

Jensen, Per Langå

2004-01-01

It is often argued and supported by a number of case studies that investment in human factors and occupational health and safety can pay. But any employer has a number of possible in-vestments, and many of these may have a larger marginal utility than health and safety. In addition it is often...... difficult to calculate the exact pay off for human factors and health and safety – how to calculate higher motivation for instance. The economic benefit as a possible driving force for improvement of occupational health and safety is likely to exist but it must be considered a relatively weak force. Another...... important driving force for improvements in health and safety. No employer likes to be ‘branded’ as immoral, manifested in fines by the labour inspectors or media attention to an unsafe conduct. Strategies to im-prove health and safety therefore need to focus on the legitimacy as the probably strongest...

Occupational Health and Safety and Employer Motivation

DEFF Research Database (Denmark)

Hasle, Peter; Jensen, Per Langå

2004-01-01

It is often argued and supported by a number of case studies that investment in human factors and occupational health and safety can pay. But any employer has a number of possible in-vestments, and many of these may have a larger marginal utility than health and safety. In addition it is often...... difficult to calculate the exact pay off for human factors and health and safety – how to calculate higher motivation for instance. The economic benefit as a possible driving force for improvement of occupational health and safety is likely to exist but it must be considered a relatively weak force. Another...... important driving force for improvements in health and safety. No employer likes to be ‘branded’ as immoral, manifested in fines by the labour inspectors or media attention to an unsafe conduct. Strategies to im-prove health and safety therefore need to focus on the legitimacy as the probably strongest...

Advancing the framework for considering the effects of climate change on worker safety and health.

Science.gov (United States)

Schulte, P A; Bhattacharya, A; Butler, C R; Chun, H K; Jacklitsch, B; Jacobs, T; Kiefer, M; Lincoln, J; Pendergrass, S; Shire, J; Watson, J; Wagner, G R

2016-11-01

In 2009, a preliminary framework for how climate change could affect worker safety and health was described. That framework was based on a literature search from 1988-2008 that supported seven categories of climate-related occupational hazards: (1) increased ambient temperature; (2) air pollution; (3) ultraviolet radiation exposure; (4) extreme weather; (5) vector-borne diseases and expanded habitats; (6) industrial transitions and emerging industries; and (7) changes in the built environment. This article reviews the published literature from 2008-2014 in each of the seven categories. Additionally, three new topics related to occupational safety and health are considered: mental health effects, economic burden, and potential worker safety and health impacts associated with the nascent field of climate intervention (geoengineering). Beyond updating the literature, this article also identifies key priorities for action to better characterize and understand how occupational safety and health may be associated with climate change events and ensure that worker health and safety issues are anticipated, recognized, evaluated, and mitigated. These key priorities include research, surveillance, risk assessment, risk management, and policy development. Strong evidence indicates that climate change will continue to present occupational safety and health hazards, and this framework may be a useful tool for preventing adverse effects to workers.

Effect of Practice Ownership on Work Environment, Learning Culture, Psychological Safety, and Burnout.

Science.gov (United States)

Cuellar, Alison; Krist, Alex H; Nichols, Len M; Kuzel, Anton J

2018-04-01

Physicians have joined larger groups and hospital systems in the face of multiple environmental challenges. We examine whether there are differences across practice ownership in self-reported work environment, a practice culture of learning, psychological safety, and burnout. Using cross-sectional data from staff surveys of small and medium-size practices that participated in EvidenceNOW in Virginia, we tested for differences in work environment, culture of learning, psychological safety, and burnout by practice type. We conducted weighted multivariate linear regression of outcomes on ownership, controlling for practice size, specialty mix, payer mix, and whether the practice was located in a medically underserved area. We further analyzed clinician and staff responses separately. Participating were 104 hospital-owned and 61 independent practices and 24 federally qualified health centers (FQHCs). We analyzed 2,005 responses from practice clinicians and staff, a response rate of 49%. Working in a hospital-owned practice was associated with favorable ratings of work environment, psychological safety, and burnout compared with independent practices. When we examined separately the responses of clinicians vs staff, however, the association appears to be largely driven by staff. Hospital ownership was associated with positive perceptions of practice work environment and lower burnout for staff relative to independent ownership, whereas clinicians in FQHCs perceive a more negative, less joyful work environment and burnout. Our findings are suggestive that clinician and nonclinician staff perceive practice adaptive reserve differently, which may have implications for creating the energy for ongoing quality improvement work. © 2018 Annals of Family Medicine, Inc.

Assessment of the effects of the zero gravity environment on the health and safety of space workers

Science.gov (United States)

1980-01-01

A review was conducted of currently available information relating to adverse effects to the health and safety that space power system (SPS) space workers may experience. Currently available information on the responses of humans to space flight is somewhat limited and was obtained under conditions which are grossly different from conditions to be experienced by future space workers. The limitations in information and differences in conditions were considered in the assessment of potential health and safety hazards to the SPS space workers. The study did not disclose any adverse effects that would result in long term deviations to the medical physiological health of space workers so long as proper preventive or ameliorating action were taken.

Industrial Student Apprenticeship: Understanding Health and Safety

Science.gov (United States)

Simanjuntak, M. V.; Abdullah, A. G.; Puspita, R. H.; Mahdan, D.; Kamaludin, M.

2018-02-01

The level of accident in industry is very high caused by lack of knowledge and awareness of workers toward the health and safety. Health and Safety are efforts to create a comfortable and productive atmosphere to accomplish a purpose or goal as maximum risk in the workplace. Vocational Education students must conduct training on business and industry, prior to that they should have a clear understanding on occupational health and safety. The purpose of this research is to analyze the understanding, preparation, and implementation of work health and safety of the students. Method used is descriptive method and data are collected using instrument, observation and interview. The result of study is conclusion of understanding occupational health and safety of vocational education students.

Positioning radiation safety in occupational safety and health programme in an organization[RPO - radiation protection officer

Energy Technology Data Exchange (ETDEWEB)

Onn, Abed Bin [National Inst. of Occupational Safety and Health, Bangi (Malaysia)

2000-07-01

The Atomic Energy Licensing Act 1984, which is under purview of the Ministry of Science, Technology and Environment, and Occupational Safety and Health Act, OSHA 1994, under Ministry of Human Resources were discussed. RPO responsibilities were discussed in detailed. As the conclusion, organization which complies with the provisions of the AELA 1984 are well on the way to complying the requirements of OSHA 1994.

20 CFR 401.160 - Health or safety.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Health or safety. 401.160 Section 401.160... INFORMATION Disclosure of Official Records and Information § 401.160 Health or safety. The Privacy Act allows us to disclose information in compelling circumstances where an individual's health or safety is...

Occupational Safety and Health Curriculum Manual.

Science.gov (United States)

Gourley, Frank A., Jr., Comp.

With the enactment of the Occupational Safety and Health Act of 1970, the need for manpower development in the field of industrial safety and hygiene has resulted in the development of a broad based program in Occupational Safety and Health. The manual provides information to administrators and instructors on a program of study in this field for…

ORNL necessary and sufficient standards for environment, safety, and health. Final report of the Identification Team for other industrial, radiological, and non-radiological hazard facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-07-01

This Necessary and Sufficient (N and S) set of standards is for Other Industrial, Radiological, and Non-Radiological Hazard Facilities at Oak Ridge National Laboratory (ORNL). These facility classifications are based on a laboratory-wide approach to classify facilities by hazard category. An analysis of the hazards associated with the facilities at ORNL was conducted in 1993. To identify standards appropriate for these Other Industrial, Radiological, and Non-Radiological Hazard Facilities, the activities conducted in these facilities were assessed, and the hazards associated with the activities were identified. A preliminary hazards list was distributed to all ORNL organizations. The hazards identified in prior hazard analyses are contained in the list, and a category of other was provided in each general hazard area. A workshop to assist organizations in properly completing the list was held. Completed hazard screening lists were compiled for each ORNL division, and a master list was compiled for all Other Industrial, Radiological Hazard, and Non-Radiological facilities and activities. The master list was compared against the results of prior hazard analyses by research and development and environment, safety, and health personnel to ensure completeness. This list, which served as a basis for identifying applicable environment, safety, and health standards, appears in Appendix A.

ORNL necessary and sufficient standards for environment, safety, and health. Final report of the Identification Team for other industrial, radiological, and non-radiological hazard facilities

International Nuclear Information System (INIS)

1998-07-01

This Necessary and Sufficient (N and S) set of standards is for Other Industrial, Radiological, and Non-Radiological Hazard Facilities at Oak Ridge National Laboratory (ORNL). These facility classifications are based on a laboratory-wide approach to classify facilities by hazard category. An analysis of the hazards associated with the facilities at ORNL was conducted in 1993. To identify standards appropriate for these Other Industrial, Radiological, and Non-Radiological Hazard Facilities, the activities conducted in these facilities were assessed, and the hazards associated with the activities were identified. A preliminary hazards list was distributed to all ORNL organizations. The hazards identified in prior hazard analyses are contained in the list, and a category of other was provided in each general hazard area. A workshop to assist organizations in properly completing the list was held. Completed hazard screening lists were compiled for each ORNL division, and a master list was compiled for all Other Industrial, Radiological Hazard, and Non-Radiological facilities and activities. The master list was compared against the results of prior hazard analyses by research and development and environment, safety, and health personnel to ensure completeness. This list, which served as a basis for identifying applicable environment, safety, and health standards, appears in Appendix A

77 FR 40622 - Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety...

Science.gov (United States)

2012-07-10

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety and Health (MSHRAC, NIOSH..., oxygen supply partnership, safety culture, occupational health and safety management systems, preventing...

Assessment of zero gravity effects on space worker health and safety

Science.gov (United States)

1980-01-01

One objective of the study is to assess the effects of all currently known deviations from normal of medical, physiological, and biochemical parameters which appear to be due to zero gravity (zero-g) environment and to acceleration and deceleration to be experienced, as outlined in the references Solar Power Satellites (SPS) design, by space worker. Study results include identification of possible health or safety effects on space workers either immediate or delayed due to the zero gravity environment and acceleration and deceleration; estimation of the probability that an individual will be adversely affected; description of the possible consequence to work efficiency in persons adversely affected; and description of the possible/probable consequences to immediate and future health of individuals exposed to this environment. A research plan, which addresses the uncertainties in current knowledge regarding the health and safety hazards to exposed SPS space workers, is presented. Although most adverse affects experienced during space flight soon disappeared upon return to the Earth's environment, there remains a definite concern for the long-term effects to SPS space workers who might spend as much as half their time in space during a possible five year career period. The proposed 90 day up/90 day down cycle, coupled with the fact that most of the effects of weightlessness may persist throughout the flight along with the realization that recovery may occupy much of the terrestrial stay, may keep the SPS workers in a deviant physical condition or state of flux for 60 to 100% of their five year career.

Assessment of zero gravity effects on space worker health and safety

Energy Technology Data Exchange (ETDEWEB)

1980-11-01

One objective of the study is to assess the effects of all currently known deviations from normal of medical, physiological, and biochemical parameters which appear to be due to zero gravity (zero-g) environment and to acceleration and deceleration to be experienced, as outlined in the reference Solar Power Satellite (SPS) design, by space worker. Study results include identification of possible health or safety effects on space workers - either immediate or delayed - due to the zero gravity environment and acceleration and deceleration; estimation of the probability that an individual will be adversely affected; description of the possible consequence to work efficiently in persons adversely affected; and description of the possible/probable consequences to immediate and future health of individuals exposed to this environment. A research plan, which addresses the uncertainties in current knowledge regarding the health and safety hazards to exposed SPS space workers, is presented. Although most adverse affects experienced during space flight soon disappeared upon return to the Earth's environment, there remains a definite concern for the long-term effects to SPS space workers who might spend as much as half their time in space during a possible five-year career period. The proposed 90-day up/90 day down cycle, coupled with the fact that most of the effects of weightlessness may persist throughout the flight along with the realization that recovery may occupy much of the terrestrial stay, may keep the SPS workers in a deviant physical condition or state of flux for 60 to 100% of their five-year career. (JGB)

Occupational Safety and Related Impacts on Health  and the Environment

Directory of Open Access Journals (Sweden)

Andrew Watterson

2016-10-01

Full Text Available The inter-relationship between safety, health and the ‘environment’ is a complex and at times a relatively neglected topic. In this issue, ‘safety’ is often viewed by contributors as ‘health and safety’ and includes occupationally‐related ill health as well as injury or harm to employees and the wider public. ‘Environment’ is also interpreted in the widest sense covering both physical and work environments with upstream work hazards presenting risks to downstream communities. The focus is very much on exploring and where possible addressing the challenges, some old and some facing workers in a range of public and private settings and also at times their nearby communities. The 19 papers in the issue cover public and private sectors, global and very local populations, macro‐theoretical perspectives, large epidemiological and some single factory or hospital site small case studies. A number of the papers are just beginning to explore and draw out for the first time the risks from hazards in their part of the world. The methodologies adopted also range from lab-based studies through ergonomic assessments and interventions to therapeutic approaches.

The occupational health and safety of flight attendants.

Science.gov (United States)

Griffiths, Robin F; Powell, David M C

2012-05-01

In order to perform safety-critical roles in emergency situations, flight attendants should meet minimum health standards and not be impaired by factors such as fatigue. In addition, the unique occupational and environmental characteristics of flight attendant employment may have consequential occupational health and safety implications, including radiation exposure, cancer, mental ill-health, musculoskeletal injury, reproductive disorders, and symptoms from cabin air contamination. The respective roles of governments and employers in managing these are controversial. A structured literature review was undertaken to identify key themes for promoting a future agenda for flight attendant health and safety. Recommendations include breast cancer health promotion, implementation of Fatigue Risk Management Systems, standardization of data collection on radiation exposure and health outcomes, and more coordinated approaches to occupational health and safety risk management. Research is ongoing into cabin air contamination incidents, cancer, and fatigue as health and safety concerns. Concerns are raised that statutory medical certification for flight attendants will not benefit either flight safety or occupational health.

Health, safety and environment

International Nuclear Information System (INIS)

1977-01-01

This part is concerned with the overall evaluation of the radiological and environmental aspects. It attempts to analyse problems such as: Does the establishment of a large regional centre with co-located facilities for storage, reprocessing, fuel fabrication and waste management create unacceptable radiological and environmental problems. If such a centre can be safely designed and operated, what guidance could be given to Member States wishing to explore the potential of an RFCC. For such a venture, what are the key ingredients of an adequate programme for the protection of workers and the environment under normal and emergency conditions. The approach has been taken of keeping as many parameters as possible constant while making a comparison between a multinational fuel cycle centre and a smaller national fuel cycle centre. The following two options are considered: a) A national fuel cycle centre with a 100-600t/a reprocessing plant co-located with a 20-120t/a mixed oxide fuel fabrication plant. b) An RFCC with one or more 700-1500t/a reprocessing plants, a 125-300t/a mixed oxide fabrication plant and waste management facilities

Measuring school climate in high schools: a focus on safety, engagement, and the environment.

Science.gov (United States)

Bradshaw, Catherine P; Waasdorp, Tracy E; Debnam, Katrina J; Johnson, Sarah Lindstrom

2014-09-01

School climate has been linked to multiple student behavioral, academic, health, and social-emotional outcomes. The US Department of Education (USDOE) developed a 3-factor model of school climate comprised of safety, engagement, and environment. This article examines the factor structure and measurement invariance of the USDOE model. Drawing upon 2 consecutive waves of data from over 25,000 high school students (46% minority), a series of exploratory and confirmatory factor analyses examined the fit of the Maryland Safe and Supportive Schools Climate Survey with the USDOE model. The results indicated adequate model fit with the theorized 3-factor model of school climate, which included 13 subdomains: safety (perceived safety, bullying and aggression, and drug use); engagement (connection to teachers, student connectedness, academic engagement, school connectedness, equity, and parent engagement); environment (rules and consequences, physical comfort, and support, disorder). We also found consistent measurement invariance with regard to student sex, grade level, and ethnicity. School-level interclass correlation coefficients ranged from 0.04 to .10 for the scales. Findings supported the USDOE 3-factor model of school climate and suggest measurement invariance and high internal consistency of the 3 scales and 13 subdomains. These results suggest the 56-item measure may be a potentially efficient, yet comprehensive measure of school climate. © 2014, American School Health Association.

Waste management to improve food safety and security for health advancement.

Science.gov (United States)

Lin, Angela Yu-Chen; Huang, Susana Tzy-Ying; Wahlqvist, Mark L

2009-01-01

Economic growth inevitably influences the food chain. Growing demand with changes in lifestyle and health consciousness encourage use of packaged and pre-prepared foods. The needs of environmental protection from waste generated are largely overlooked, and a lack of knowledge about the impact on the environment and its health effects constitute food security/safety problems. Food production and waste generation directly affect resource (i.e., energy and water) consumption and often contaminate the environment. More pressure on food production has inculcated the use of pesticides, herbicides, antibiotics and chemical fertilizers which add to current global pollution. At least half of food grown is discarded before and after it reaches consumers. It is estimated that one third to half of landfill waste comes from the food sector. This landfill releases green house gases (GHG) as well as leachate which worsen soil and water quality and safety. Pharmaceutical and chemical contaminations from residential, industrial and agricultural sources make their way into nearby water and soil and can eventually affect our food systems. Phthalates, PFOA, BPA, commonly used in plastics and personal care products, are found in unacceptable concentrations in Taiwanese waters. They, too, contribute to food contamination and long-term health risk. Existing waste management strategies warrant more stringent norms for waste reduction at source. Awareness through education could reduce food waste and its consequences. This review encompasses impacts of food production systems on the environment, pollution which results from food waste, costs and economic advantages in food waste management, and health consequences of waste.

Health and safety of the older worker.

Science.gov (United States)

Farrow, A; Reynolds, F

2012-01-01

In the UK, increasing numbers of paid employees are over 60 years with further increases expected as the state pension age rises. Some concern surrounds possible increased work-related illness and accidents for people working beyond the age of 60. To identify the available evidence for health and safety risks of workers over age 60 years with respect to factors associated with injuries and accidents. Databases searched included PUBMED, OSHUpdate, National Institute for Occupational Safety and Health (NIOSHTIC-2), SafetyLit, the UK The Health and Safety Executive (HSELINE) and the Canadian Centre for Occupational Health and Safety until December 2009. Inclusion criteria were workers aged over 60 years. Findings were grouped into occupational accidents and injuries and individual and workplace factors that may have influenced risk of injury to the over-60s. Very little direct evidence was found concerning safety practices and health risks of workers over age 60. Some safety risks were associated with specific physical declines such as age-related hearing loss. Overall, these workers had fewer accidents and injuries but these were more likely to be serious or fatal when they occurred. There was no strong evidence that work patterns, including shift work or overtime, affected safety. Protective, compensatory strategies or experience may maintain safe working practices. Implications for health and safety risks cannot be assessed without longitudinal research on workforces with substantial numbers of workers over age 60 in order to address the healthy worker effect.

Safety level assessment in the production environment using Fuzzy logic

Directory of Open Access Journals (Sweden)

2012-05-01

Conclusion: The application of the proposed method can reveal which safety items and factors are most important in improving workers safety, and therefore decide where to concentrate resources in order to improve the safety of the work environment.

An Efficient Taguchi Approach for the Performance Optimization of Health, Safety, Environment and Ergonomics in Generation Companies.

Science.gov (United States)

Azadeh, Ali; Sheikhalishahi, Mohammad

2015-06-01

A unique framework for performance optimization of generation companies (GENCOs) based on health, safety, environment, and ergonomics (HSEE) indicators is presented. To rank this sector of industry, the combination of data envelopment analysis (DEA), principal component analysis (PCA), and Taguchi are used for all branches of GENCOs. These methods are applied in an integrated manner to measure the performance of GENCO. The preferred model between DEA, PCA, and Taguchi is selected based on sensitivity analysis and maximum correlation between rankings. To achieve the stated objectives, noise is introduced into input data. The results show that Taguchi outperforms other methods. Moreover, a comprehensive experiment is carried out to identify the most influential factor for ranking GENCOs. The approach developed in this study could be used for continuous assessment and improvement of GENCO's performance in supplying energy with respect to HSEE factors. The results of such studies would help managers to have better understanding of weak and strong points in terms of HSEE factors.

10 CFR 851.23 - Safety and health standards.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and..., “Marine Terminals.” (6) Title 29 CFR, Part 1918, “Safety and Health Regulations for Longshoring.” (7...

Nanomaterials: new challenges in environmental health and safety

International Nuclear Information System (INIS)

Sun, Casper; Gallaghar, Robert G.

2008-01-01

A follow-up of the Nano-panel discussion in the 41 st Midyear Health Physics Society (HPS) meeting, Oakland CA, 'Accelerators and Nanoparticles' have been introduced to and discussed among participants, i.e., health physicists, especially within the topic that monitoring and measurement of nano-radioactive materials. It is documented clearly that the chemistry and physical mobility and optical properties, and the monitoring and protection requirements for nano-radioactive substances vary observed from collective experiences. Soon after nanocarbon-tube discovery and use of the innovated materials expand, as nanoscience and nanotechnogy, exponential globally and revolutionized in just about every industries, for examples, agricultural, chemical, biological, pharmaceutical, medical, electronic, green-energies. To produce individual desired benefits, the engineered tiny substances could add health risk inevitably to the workers and consumers. The environmental health and safety (EH and S) research budgets and awareness programs have been steady increased in according with National Nanotechnology Initiative (NNI) report. All nanoscale materials which they have virtually invisible and yet can penetrate and deposit on cell walls of living organs and tissues without being detected once inhaled or ingested in the body, the handling and application of these materials with associated hazard in terms of occupational and environment risk must be identified, investigated, and documented before any of damage or vulnerability revealed. In the other words, be prepared then sorry. Many common properties and risk issues are identical or very similar between radioactive and nanoscale materials. Both are exist naturally and will persist. What is and is not a problem, must be clearly understood to support operational and protection decision making. The safety data must be provided in Internet transparently and voluntarily. All nanomaterials should consider as hazard before proofed. The

Occupational Safety and Health: A View of Current Practices in Agricultural Education

Science.gov (United States)

Threeton, Mark D.; Ewing, John C.; Evanoski, Danielle C.

2015-01-01

Providing safe and secure teaching and learning environments within schools is an ongoing process which requires a significant amount of attention. Therefore, this study sought to: 1) explore safety and health practices within secondary Agricultural Mechanics Education; and 2) identify the perceived obstacles which appear to hinder implementation…

UMTRA Project environmental, health, and safety plan

International Nuclear Information System (INIS)

1989-02-01

The basic health and safety requirements established in this plan are designed to provide guidelines to be applied at all Uranium Mill Tailings Remedial Action (UMTRA) Project sites. Specific restrictions are given where necessary. However, an attempt has been made to provide guidelines which are generic in nature, and will allow for evaluation of site-specific conditions. Health and safety personnel are expected to exercise professional judgment when interpreting these guidelines to ensure the health and safety of project personnel and the general population. This UMTRA Project Environmental, Health, and Safety (EH ampersand S) Plan specifies the basic Federal health and safety standards and special DOE requirements applicable to this program. In addition, responsibilities in carrying out this plan are delineated. Some guidance on program requirements and radiation control and monitoring is also included. An Environmental, Health, and Safety Plan shall be developed as part of the remedial action plan for each mill site and associated disposal site. Special conditions at the site which may present potential health hazards will be described, and special areas that should should be addressed by the Remedial Action Contractor (RAC) will be indicated. Site-specific EH ampersand S concerns will be addressed by special contract conditions in RAC subcontracts. 2 tabs

Campylobacter in the environment: A major threat to public health

Directory of Open Access Journals (Sweden)

Hussein Hasan Abulreesh

2017-06-01

Full Text Available Epidemiological data suggest that Campylobacter remains a worldwide leading cause of gastrointestinal infections. Improperly prepared meat products, unpasteurized milk as well as non chlorinated drinking water were shown to be the main sources of campylobacteriosis. The Campylobacter survival mechanism in various environments facilitated the transmission of Campylobacter-associated infections; however the exact mode of transmission remains to be elucidated. This review aims to summarize recent insights on the incidence and survival of Campylobacter in the environment. Besides, methods of detection and risk assessment for public health safety are also addressed.

Health and safety annual report 1992

International Nuclear Information System (INIS)

1993-01-01

BNFL operates 6 sites in the United Kingdom concerned with the nuclear fuel cycle. The annual report on occupational health and safety gives information on all aspects of health and safety within BNFL with special reference to radiation doses received by the workforce and radiation protection measures taken by the company. BNFL's safety policy is set out. Radiation doses to all workers have remained low. Other industrial accidents are also listed and its safety measures for transport, radioactive effluents and in the event of an incident, are mentioned briefly. (UK)

Health and safety regulation of uranium mining and milling

International Nuclear Information System (INIS)

Dory, A.B.

1980-07-01

The Canadian Atomic Energy Control Board licenses all nuclear facilities in Canada, including uranium mines and mills. The protection of health, safety and the environment is one of the requirements of each licence. A limit of 4 Working Level Months exposure to radon and radon daughters annually has been set, and guidelines for weekly or more frequent workplace monitoring have been established. Personal monitoring devices are being tested, and thermoluminescent dosimeters are to be introduced. The Board reviews its licensees' ventilation plans continuously. The staged licensing process involves the granting of the following documents: 1) ore removal; 2) underground exploration permit; 3) site and construction approval; 4) mining facility operating licence; 5) shut-down approval. Compliance with regulations and licence conditions is monitored mainly by inspectors appointed by provincial agencies, with Board staff exercising auditing fuctions. The Board involves the workers directly with their own health and safety by sending their unions copies of all relevant documents and inviting comments

NASA Satellite Observations: A Unique Asset for the Study of the Environment and Implications for Public Health

Science.gov (United States)

Estes Sue M.

2010-01-01

This slide presentation highlights how satellite observation systems are assets for studying the environment in relation to public health. It includes information on current and future satellite observation systems, NASA's public health and safety research, surveillance projects, and NASA's public health partners.

Practicing industrial safety - issues involved

International Nuclear Information System (INIS)

Gunasekaran, P.

2016-01-01

Industrial safety is all about measures or techniques implemented to reduce the risk of injury, loss to persons, property or the environment in any industrial facility. The issue of industrial safety evolved concurrently with industrial development as a shift from compensation to prevention as well. Today, industrial safety is widely regarded as one of the most important factors that any business, large or small, must consider in its operations, as prevention of loss is also a part of profit. Factories Act of Central government and Rules made under it by the state deals with the provisions on industrial safety legislation. There are many other acts related to safety of personnel, property and environment. Occupational health and safety is also of primary concern. The aim is to regulate health and safety conditions for all employers. It includes safety standards and health standards. These acts encourage employers and employees to reduce workplace hazards and to implement new or improve existing safety and health standards; and develop innovative ways to achieve them. Maintain a reporting and record keeping system to monitor job-related injuries and illnesses; establish training programs to increase the number and competence of occupational safety and health personnel

Advancing perinatal patient safety through application of safety science principles using health IT.

Science.gov (United States)

Webb, Jennifer; Sorensen, Asta; Sommerness, Samantha; Lasater, Beth; Mistry, Kamila; Kahwati, Leila

2017-12-19

The use of health information technology (IT) has been shown to promote patient safety in Labor and Delivery (L&D) units. The use of health IT to apply safety science principles (e.g., standardization) to L&D unit processes may further advance perinatal safety. Semi-structured interviews were conducted with L&D units participating in the Agency for Healthcare Research and Quality's (AHRQ's) Safety Program for Perinatal Care (SPPC) to assess units' experience with program implementation. Analysis of interview transcripts was used to characterize the process and experience of using health IT for applying safety science principles to L&D unit processes. Forty-six L&D units from 10 states completed participation in SPPC program implementation; thirty-two (70%) reported the use of health IT as an enabling strategy for their local implementation. Health IT was used to improve standardization of processes, use of independent checks, and to facilitate learning from defects. L&D units standardized care processes through use of electronic health record (EHR)-based order sets and use of smart pumps and other technology to improve medication safety. Units also standardized EHR documentation, particularly related to electronic fetal monitoring (EFM) and shoulder dystocia. Cognitive aids and tools were integrated into EHR and care workflows to create independent checks such as checklists, risk assessments, and communication handoff tools. Units also used data from EHRs to monitor processes of care to learn from defects. Units experienced several challenges incorporating health IT, including obtaining organization approval, working with their busy IT departments, and retrieving standardized data from health IT systems. Use of health IT played an integral part in the planning and implementation of SPPC for participating L&D units. Use of health IT is an encouraging approach for incorporating safety science principles into care to improve perinatal safety and should be incorporated

Pesticides and the Environment

Science.gov (United States)

; Environment Human Health Animal Health Safe Use Practices Food Safety Environment Air Water Soil Wildlife Home Page Pesticides and the Environment Related Topics: What Happens to Pesticides Released into the Environment? Pesticide Storage Pesticide Disposal Pesticide Products Integrated Pest Management (IPM) How Safe

Anthropology in Agricultural Health and Safety Research and Intervention.

Science.gov (United States)

Arcury, Thomas

2017-01-01

Agriculture remains a dangerous industry, even as agricultural science and technology continue to advance. Research that goes beyond technological changes to address safety culture and policy are needed to improve health and safety in agriculture. In this commentary, I consider the potential for anthropology to contribute to agricultural health and safety research by addressing three aims: (1) I briefly consider what the articles in this issue of the Journal of Agromedicine say about anthropologists in agricultural health and safety; (2) I discuss what anthropologists can add to agricultural health and safety research; and (3) I examine ways in which anthropologists can participate in agricultural health and safety research. In using their traditions of rigorous field research to understand how those working in agriculture perceive and interpret factors affecting occupational health and safety (their "emic" perspective), and translating this perspective to improve the understanding of occupational health professionals and policy makers (an "etic" perspective), anthropologists can expose myths that limit improvements in agricultural health and safety. Addressing significant questions, working with the most vulnerable agricultural communities, and being outside establishment agriculture provide anthropologists with the opportunity to improve health and safety policy and regulation in agriculture.

Promoting Safety Environment for School Sports | Aluko | AFRREV ...

African Journals Online (AJOL)

The purpose of this study was to examine the safety environment under which school sports programme is organized in Nigeria schools. The paper noted that poor environment under which PES is administered militated against smooth attainment of physical education and sports in schools. In this regard the paper explored ...

Travelers' Health: Injuries and Safety

Science.gov (United States)

... Safety Road Safety - 8 Steps MERS Health Advisory poster MERS Pictogram CDC Guide for Healthy Travel Website ... possible, fly on larger planes (>30 seats), in good weather, during the daylight hours, and with experienced ...

Project health and safety plan for the Gunite and Associated Tanks at Oak Ridge National Laboratory, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

Abston, J.P.

1997-04-01

The Lockheed Martin Energy Systems, Inc. (Energy Systems) policy is to provide a safe and healthful workplace for all employees and subcontractors. The accomplishment of this policy requires that operations at the Gunite and Associated Tanks (GAAT) in the North and South Tank Farms (NTF and STF) at the Department of Energy (DOE) Oak Ridge National Laboratory are guided by an overall plan and consistent proactive approach to health and safety (H and S) issues. The policy and procedures in this plan apply to all GAAT operations in the NTF and STF. The provisions of this plan are to be carried out whenever activities identifies s part of the GAAT are initiated that could be a threat to human health or the environment. This plan implements a policy and establishes criteria for the development of procedures for day-to-day operations to prevent or minimize any adverse impact to the environment and personnel safety and health and to meet standards that define acceptable management of hazardous and radioactive materials and wastes. The plan is written to utilize past experience and best management practices in order to minimize hazards to human health or the environment from events such as fires, explosions, falls, mechanical hazards, or any unplanned release of hazardous or radioactive materials to the air. This plan explains additional task-specific health and safety requirements such as the Site Safety and health Addendum and Activity Hazard Analysis, which should be used in concert with this plan and existing established procedures

Project health and safety plan for the Gunite and Associated Tanks at Oak Ridge National Laboratory, Oak Ridge, Tennessee

Energy Technology Data Exchange (ETDEWEB)

Abston, J.P.

1997-04-01

The Lockheed Martin Energy Systems, Inc. (Energy Systems) policy is to provide a safe and healthful workplace for all employees and subcontractors. The accomplishment of this policy requires that operations at the Gunite and Associated Tanks (GAAT) in the North and South Tank Farms (NTF and STF) at the Department of Energy (DOE) Oak Ridge National Laboratory are guided by an overall plan and consistent proactive approach to health and safety (H and S) issues. The policy and procedures in this plan apply to all GAAT operations in the NTF and STF. The provisions of this plan are to be carried out whenever activities identifies s part of the GAAT are initiated that could be a threat to human health or the environment. This plan implements a policy and establishes criteria for the development of procedures for day-to-day operations to prevent or minimize any adverse impact to the environment and personnel safety and health and to meet standards that define acceptable management of hazardous and radioactive materials and wastes. The plan is written to utilize past experience and best management practices in order to minimize hazards to human health or the environment from events such as fires, explosions, falls, mechanical hazards, or any unplanned release of hazardous or radioactive materials to the air. This plan explains additional task-specific health and safety requirements such as the Site Safety and health Addendum and Activity Hazard Analysis, which should be used in concert with this plan and existing established procedures.

Risk factors for fishermen’s health and safety in Greece

DEFF Research Database (Denmark)

Frantzeskou, Elpida; Kastania, Anastasia N; Riza, Elena

2013-01-01

Aim: The aim of the study is to determine the risks for health and safety in Greek fisheries workers by exploring their health status and the health risk factors present in their occupational environment, thus providing a current baseline for further research in the future and for documentation....... The health risks factors studied include excessive weight, cardiovascular incidents and dermatological, musculoskeletal, respiratory, hearing, stress, and anxiety problems. The occupational health risk factors include alcohol, fatty food consumption, smoking, and lack of physical exercise. Conclusions......: The health effects observed are causally related to diet, smoking, and exercise, which in turn relate to the specific working conditions and culture in small-scale fishing that need to be taken into consideration in prevention programmes. The results are comparable withinternational fisheries experience...

77 FR 11120 - Patient Safety Organizations: Voluntary Relinquishment From UAB Health System Patient Safety...

Science.gov (United States)

2012-02-24

... Organizations: Voluntary Relinquishment From UAB Health System Patient Safety Organization AGENCY: Agency for... notification of voluntary relinquishment from the UAB Health System Patient Safety Organization of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005...

Support for learning in the perspective of patient safety in primary health care

Directory of Open Access Journals (Sweden)

Thatianny Tanferri de Brito Paranaguá

Full Text Available ABSTRACT Objective: to analyze the support for learning, in the perspective of patient safety, offered in the work environment, according to health professionals working in primary care. Method: a transversal study, held with 86 health professionals working in primary care. A validated instrument was used, applied via the Internet. Descriptive statistical analysis was undertaken with a presentation of median, mean, standard deviation and coefficient of variation. Results: points which are favorable to supporting learning were evidenced, such as mutual respect, autonomy for organizing the work and valorization of new ideas, which obtained means above 7.0. The variables which hinder the process of learning in the work environment, perceived by the professionals, were: resistance to changes, and excess of work impeding reflection on how to improve the work, with means above 6.0. Conclusion: the study found evidence of indicators related to the process of staff development in the area of health and indicates the influence of support for learning for the improvement of the work processes and of patient safety. It is necessary that a culture involving the systematic assessment of educational interventions in health should be established, the aim being to diagnose actions which are more incisive for changing health professionals' attitude and, therefore, clinical practice.

Hazard Identification and Risk Assessment in Water Treatment Plant considering Environmental Health and Safety Practice

Directory of Open Access Journals (Sweden)

Falakh Fajrul

2018-01-01

Full Text Available Water Treatment Plant (WTP is an important infrastructure to ensure human health and the environment. In its development, aspects of environmental safety and health are of concern. This paper case study was conducted at the Water Treatment Plant Company in Semarang, Central Java, Indonesia. Hazard identification and risk assessment is one part of the occupational safety and health program at the risk management stage. The purpose of this study was to identify potential hazards using hazard identification methods and risk assessment methods. Risk assessment is done using criteria of severity and probability of accident. The results obtained from this risk assessment are 22 potential hazards present in the water purification process. Extreme categories that exist in the risk assessment are leakage of chlorine and industrial fires. Chlorine and fire leakage gets the highest value because its impact threatens many things, such as industrial disasters that could endanger human life and the environment. Control measures undertaken to avoid potential hazards are to apply the use of personal protective equipment, but management will also be better managed in accordance with hazard control hazards, occupational safety and health programs such as issuing work permits, emergency response training is required, Very useful in overcoming potential hazards that have been determined.

Hazard Identification and Risk Assessment in Water Treatment Plant considering Environmental Health and Safety Practice

Science.gov (United States)

Falakh, Fajrul; Setiani, Onny

2018-02-01

Water Treatment Plant (WTP) is an important infrastructure to ensure human health and the environment. In its development, aspects of environmental safety and health are of concern. This paper case study was conducted at the Water Treatment Plant Company in Semarang, Central Java, Indonesia. Hazard identification and risk assessment is one part of the occupational safety and health program at the risk management stage. The purpose of this study was to identify potential hazards using hazard identification methods and risk assessment methods. Risk assessment is done using criteria of severity and probability of accident. The results obtained from this risk assessment are 22 potential hazards present in the water purification process. Extreme categories that exist in the risk assessment are leakage of chlorine and industrial fires. Chlorine and fire leakage gets the highest value because its impact threatens many things, such as industrial disasters that could endanger human life and the environment. Control measures undertaken to avoid potential hazards are to apply the use of personal protective equipment, but management will also be better managed in accordance with hazard control hazards, occupational safety and health programs such as issuing work permits, emergency response training is required, Very useful in overcoming potential hazards that have been determined.

Center for Maritime Safety and Health Studies

Data.gov (United States)

Federal Laboratory Consortium — Established in November 2015, the Center for Maritime Safety and Health Studies (CMSHS) promotes safety and health for all maritime workers, including those employed...

Investigation of Relationship between Level of Awareness around Health, Safety and Environment Management System and Its Effects on Safety Climate and Risk Perception by Employees in an Iran Oil Refinery, 2015

Directory of Open Access Journals (Sweden)

Milad Ahmadi Marzaleh

2017-02-01

Full Text Available Special attention of and oil, gas and petrochemical large corporation in the world to the HSE management system is due to its importance in the designing and development of products, services and processes by considering its health, safety and environment requirements. Staff's perception of the existing job risks has a significant impact on their safe behavior at work. This study was conducted to determine the relationship between safety climate and staff's perception of risk with an awareness level among employees of the HSE management system in an oil refinery in Kermanshah. The study population was employees in one of the oil refineries in Iran. After designing and questionnaire psychometric assessment of staff knowledge of HSE management system (Cronbach's alpha was 0.9 and its validity was assessed by certified professionals, Loughborough safety climate questionnaire and Flin risk perception questionnaire were used. Data analysis was performed using SPSS V22 software. Results showed that the relationship between safety climate and awareness level of the HSE management system; also the relationship between safety climate and perception of risk was also getting significant. However, the relationship between perception of risk and awareness level of the HSE management system was not significant. The results of this study showed a moderate awareness of HSE Management System in refinery workers. In this regard, appropriate and proper management policy should be committed to improving the situation. The results of this study is a profile the situation of safety climate in the refinery, which can be used as an indicator for the development of preventive policies and evaluate the performance of the organization's safety and the results of the safety improvement organization.

Implementation of child safety and health management system by means of FMEA method

Directory of Open Access Journals (Sweden)

B. Akbari Neisiani

2016-01-01

Full Text Available Every year, many accidents leading to physical injuries in kindergartens, indicates that a very large percentage of them are related to the safety concerns and lack of hygiene in these places. Families, due to their busy life style and working hours and also children needs of preschool education, are searching to find most suitable kindergartens for their children. Selecting a kindergarten with various suitable training programs, although very important criteria for selection, but is not sufficient. Indicators such as health, safety and environment issues in these places must be crucial factors in this decision making. Child safety and health management system is an integrated system, derived from health, safety and environmental management regulations which helps the kindergartens complies with relevant regulations to reduce the number of accidents occurrence. The present case study has tried, by using failure modes and effects analysis method and child safety and health management system to find the best practicable indicators to assess the relative impact of different failures in order to identify the parts of the process that are most in need of change. In this regards, 10 semi-governmental kindergartens located in Tehran District 6 of Tehran Municipality, which are supervised by municipality of Tehran were selected and evaluated. The results showed that according to the child safety and health management system and failure modes and effects analysis, all these places need massive infrastructural changes according to the preventive action list in order to be considered a safe and hygienic place for the children.

77 FR 27776 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2012-05-11

... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In... Services Office, CDC, pursuant to Public Law 92-463. Purpose: The Safety and Occupational Health Study... standard grants review and funding cycles pertaining to research issues in occupational safety and health...

76 FR 18220 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2011-04-01

... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In... Services Office, CDC, pursuant to Public Law 92-463. Purpose: The Safety and Occupational Health Study... standard grants review and funding cycles pertaining to research issues in occupational safety and health...

78 FR 40743 - Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety...

Science.gov (United States)

2013-07-08

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety and Health (MSHRAC, NIOSH... Director, NIOSH, on priorities in mine safety and health research, including grants and contracts for such...

Research on occupational safety and health for migrant workers in five Asia-Pacific countries : Australia, Republic of Korea, Malaysia, Singapore and Thailand

OpenAIRE

Lee, Kawon; McGuinness, Connor; Kawakami, Tsuyoshi

2011-01-01

Studies conditions of occupational safety and health for migrant workers in five Asia-Pacific in response to the growing concern on the improvement of safety, health and working conditions for migrant workers. It presents trends and facts within the five target countries' OSH environments for migrant workers with a long term aim to raise the awareness of workplace safety.

Child Safety: MedlinePlus Health Topic

Science.gov (United States)

... injuries in children (Medical Encyclopedia) Also in Spanish Topic Image MedlinePlus Email Updates Get Child Safety updates ... safety Preventing head injuries in children Related Health Topics Infant and Newborn Care Internet Safety Motor Vehicle ...

Pilot research on a pupil’s psychological safety in the multicultural educational environment

Directory of Open Access Journals (Sweden)

Kulikova, Tatyana I.

2016-09-01

Full Text Available In the modern world, the environment of any educational institution represents a spectrum of ethnic groups and subcultures: a multicultural educational environment. Pupils who are aware of their national identity often demonstrate intolerance toward students of other nationalities, which threatens pupils’ psychological safety. In this article, we present the results of pilot research examining the level of a pupil’s psychological safety in the multicultural educational environment and identifying the criteria that influence a pupil’s psychological safety. The research sample comprised 127 pupils aged 13–14 years from different schools living in various places that differed by the type of settlement, industrial development and level of science and culture. We isolated the following criteria for a pupil’s psychological safety in the multicultural educational environment: satisfaction with the educational environment, protection from psychological abuse and self-confidence. According to pupils, the essential characteristics of safety in the educational environment, regardless of school category and type, are being able to ask for help, protection of personal dignity, interactions with other students, and self-respect. Empirical data reveal the current status of the psychological safety of the entire sample group (n = 127 and compare indices of psychological safety in the educational institutions under study. Analysis of the results of our research indicates that protecting a pupil’s personality in the multicultural educational environment has the greatest influence on his/her psychological safety. In addition, a comfortable psychological atmosphere, mutual aid and support of pupils and low levels of classmates’ and coevals’ aggression positively influence the protection experience.

Health and safety aspects of textile workers from Solapur (India textile industries

Directory of Open Access Journals (Sweden)

Rahul B Hiremath

2014-12-01

Full Text Available Introduction: Textile sector in India plays an important role in the country's economy, providing employment to a significant population in rural and urban areas. Objectives: This paper focuses on health and safety aspects of textile workers in Solapur City (one of the key textile cluster in the state of Maharashtra, India. Methodology: A sample of 180 workers from the identified textile industries of Solapur city were assessed for their general physique, muscle tone, lung condition, and eyesight using different techniques. The study aimed at developing a framework for understanding risks to textile workers resulting from lack of health and safety standards in companies. Results: Findings showed that most of the workers have been affected by respiratory problems, increase in muscle tone, eye problems and musculoskeletal problem. It has been also observed that job security or regular work impacts positively to the worker’s long term body health. However, there is an immediate need to adopt and implement measures in accordance with Indian Factories Act (OHSAS 18001/ILO-OSH 2001 which includes directions and procedures in respect of industrial installations, work environment and occupational health and safety guidelines.

29 CFR 1925.2 - Safety and health standards.

Science.gov (United States)

2010-07-01

.... Every contractor and subcontractor shall comply with the safety and health standards published in 41 CFR... 29 Labor 7 2010-07-01 2010-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR...

32 CFR 989.27 - Occupational safety and health.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Occupational safety and health. 989.27 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.27 Occupational safety and health. Assess direct and indirect impacts of proposed actions on the safety and health of Air Force employees and...

Need for an "integrated safety assessment" of GMOs, linking food safety and environmental considerations.

Science.gov (United States)

Haslberger, Alexander G

2006-05-03

Evidence for substantial environmental influences on health and food safety comes from work with environmental health indicators which show that agroenvironmental practices have direct and indirect effects on human health, concluding that "the quality of the environment influences the quality and safety of foods" [Fennema, O. Environ. Health Perspect. 1990, 86, 229-232). In the field of genetically modified organisms (GMOs), Codex principles have been established for the assessment of GM food safety and the Cartagena Protocol on Biosafety outlines international principles for an environmental assessment of living modified organisms. Both concepts also contain starting points for an assessment of health/food safety effects of GMOs in cases when the environment is involved in the chain of events that could lead to hazards. The environment can act as a route of unintentional entry of GMOs into the food supply, such as in the case of gene flow via pollen or seeds from GM crops, but the environment can also be involved in changes of GMO-induced agricultural practices with relevance for health/food safety. Examples for this include potential regional changes of pesticide uses and reduction in pesticide poisonings resulting from the use of Bt crops or influences on immune responses via cross-reactivity. Clearly, modern methods of biotechnology in breeding are involved in the reasons behind the rapid reduction of local varieties in agrodiversity, which constitute an identified hazard for food safety and food security. The health/food safety assessment of GM foods in cases when the environment is involved needs to be informed by data from environmental assessment. Such data might be especially important for hazard identification and exposure assessment. International organizations working in these areas will very likely be needed to initiate and enable cooperation between those institutions responsible for the different assessments, as well as for exchange and analysis of

75 FR 12554 - Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety...

Science.gov (United States)

2010-03-16

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety and Health (MSHRAC, NIOSH... priorities in mine safety and health research, including grants and contracts for such research, 30 U.S.C...

75 FR 26266 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2010-05-11

... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In...) Public Law 92-463. Purpose: The Safety and Occupational Health Study Section will review, discuss, and... cycles pertaining to research issues in occupational safety and health, and allied areas. It is the...

Organizational culture and a safety-conscious work environment: The mediating role of employee communication satisfaction.

Science.gov (United States)

Silla, Inmaculada; Navajas, Joaquin; Koves, G Kenneth

2017-06-01

A safety-conscious work environment allows high-reliability organizations to be proactive regarding safety and enables employees to feel free to report any concern without fear of retaliation. Currently, research on the antecedents to safety-conscious work environments is scarce. Structural equation modeling was applied to test the mediating role of employee communication satisfaction in the relationship between constructive culture and a safety-conscious work environment in several nuclear power plants. Employee communication satisfaction partially mediated the positive relationships between a constructive culture and a safety-conscious work environment. Constructive cultures in which cooperation, supportive relationships, individual growth and high performance are encouraged facilitate the establishment of a safety-conscious work environment. This influence is partially explained by increased employee communication satisfaction. Constructive cultures should be encouraged within organizations. In addition, managers should promote communication policies and practices that support a safety-conscious work environment. Copyright © 2017 Elsevier Ltd and National Safety Council. All rights reserved.

Endangering women's health for profit: health and safety in Mexico's maquiladoras.

Science.gov (United States)

Abell, H

1999-11-01

This article focuses on the situation of women in Mexico's maquiladoras (assembly plants). There are approximately 1 million Mexicans working in over 4000 maquiladoras in which violations of worker's human, labor, and health rights exist. The specific dangers of work in maquiladoras and the double burden of domestic and factory work that women already bear all contribute to a wide range of health hazards for women. These workplace hazards include toxic chemicals, unsafe equipment, poor workstation design, and excessive heat or cold, poor ventilation and lighting, harmful noise levels, and dangerously high production quotas. Since most maquiladoras illegally dump hazardous waste and spew contaminants into the surrounding environment, residents of maquiladora communities are exposed to additional health hazards simply because they live near the plants. In response to this problem, workers have organized themselves into community-based groups and democratic unions. The need for worker-controlled organizations was emphasized because workers who are organized have greater possibilities of addressing their concerns about health, safety, wages, and job security than those who are not.

Advanced korean industrial safety and health policy with risk assessment.

Science.gov (United States)

Kwon, Hyuckmyun; Cho, Jae Hyun; Moon, Il; Choi, Jaewook; Park, Dooyong; Lee, Youngsoon

2010-09-01

This article describes a systematic roadmap master plan for advanced industrial safety and health policy in Korea, with an emphasis on. Since Korean industries had first emergence of industrial safety and health policy in 1953, enormous efforts have been made on upgrading the relevant laws in order to reflect real situation of industrial work environment in accordance with rapid changes of Korean and global business over three decades. Nevertheless, current policy has major defects; too much techniques-based articles, diverged contents in less organization, combined enforcement and punishments and finally enforcing regulations full of commands and control. These deficiencies have make it difficult to accommodate changes of social, industrial and employment environment in customized fashion. The approach to the solution must be generic at the level of paradigm-shift rather than local modifications and enhancement. The basic idea is to establish a new system integrated with a risk assessment scheme, which encourages employers to apply to their work environment under comprehensive responsibility. The risk assessment scheme is designed to enable to inspect employers' compliances afterwards. A project comprises four yearly phases based on applying zones; initially designating and operating a specified risk zone, gradually expanding the special zones during a period of 3 years (2010-2012) and the final zone expanded to entire nation. In each phase, the intermediate version of the system is updated through a process of precise and unbiased validation in terms of its operability, feasibility and sustainability with building relevant infrastructures as needed.

Promoting safety in the work environment: the role of internal marketing

OpenAIRE

2009-01-01

M.Comm. The process of creating a safe working environment for all has proved to be one of the most complex facets within an organisation. This may be attributed to the fact that there are so many elements involved in ensuring occupational safety. Not only has the individual employee a responsibility towards safety, including his or her attitude and risk-taking behaviour, but also does the organisation contribute towards this hazard-free environment in providing a culture where safety is r...

Exploring the use of situation awareness in behaviors and practices of health and safety leaders.

Science.gov (United States)

Willmer, D R

2017-01-01

An understanding of how health and safety management systems (HSMS) reduce worksite injuries, illnesses and fatalities may be gained in studying the behaviors of health and safety leaders. These leaders bear the accountability for identifying, understanding and managing the risks of a mining operation. More importantly, they have to transfer this knowledge of perception, recognition and response to risks in the mining environment to their workers. The leaders' efforts to build and maintain a mining operation's workforce that consistently executes safe work practices may be captured through more than just lagging indicators of health and safety performance. This exploratory study interviewed six leaders in occupations such as site-level safety supervisors, mine superintendents and/or general managers at surface and underground stone, sand and gravel and metal/nonmetal mine sites throughout the United States, with employee populations ranging from 40 to 175. In exploring leaders' perspectives on how they systematically manage health and safety, examples such as approaches to task training, handling near-miss incidents, identifying future leaders and providing workers with feedback offer insights into how leaders translate their knowledge and management of site-level risks to others.

Environmental, health, and safety by design

International Nuclear Information System (INIS)

Soklow, R.G.

1999-01-01

Solar Turbines Incorporated created a self-directed work team, the Safety and Environmental Awareness (SEA) Team that initiated a company wide effort to raise employee awareness to promote integrating responsible environmental, health, and safety practices into product design, manufacturing, and services. Environmental, health, and safety issues influence how all businesses operate around the world. Companies choose to operate in an environmentally responsible manner because it not only benefits employees and the communities where they live, it also benefits the business when superior performance results in a competitive advantage. Solar surveyed gas turbines users to identify their top environmental and safety concerns and issues. The authors asked about various environmental and safety aspects of their equipment. Results from the survey has helped engineering and design focus efforts so that future products and product improvements assist customers in meeting their regulatory obligations and social responsibilities. Air pollution has historically been one of the most important environmental issues facing customers, because pollutant emissions greatly influence equipment choices and operation flexibility. There are other environmental, health and safety issues: sustainable fire suppression choices, start systems, hazardous materials use and ability to recycle materials, package accessibility, noise and product take back issues

Concerns related to Safety Management of Engineered Nanomaterials in research environment

International Nuclear Information System (INIS)

Groso, A; Meyer, Th

2013-01-01

Since the rise of occupational safety and health research on nanomaterials a lot of progress has been made in generating health effects and exposure data. However, when detailed quantitative risk analysis is in question, more research is needed, especially quantitative measures of workers exposure and standards to categorize toxicity/hazardousness data. In the absence of dose-response relationships and quantitative exposure measurements, control banding (CB) has been widely adopted by OHS community as a pragmatic tool in implementing a risk management strategy based on a precautionary approach. Being in charge of health and safety in a Swiss university, where nanomaterials are largely used and produced, we are also faced with the challenge related to nanomaterials' occupational safety. In this work, we discuss the field application of an in-house risk management methodology similar to CB as well as some other methodologies. The challenges and issues related to the process will be discussed. Since exact data on nanomaterials hazardousness are missing for most of the situations, we deduce that the outcome of the analysis for a particular process is essentially the same with a simple methodology that determines only exposure potential and the one taking into account the hazardousness of ENPs. It is evident that when reliable data on hazardousness factors (as surface chemistry, solubility, carcinogenicity, toxicity etc.) will be available, more differentiation will be possible in determining the risk for different materials. On the protective measures side, all CB methodologies are inclined to overprotection side, only that some of them suggest comprehensive protective/preventive measures and others remain with basic advices. The implementation and control of protective measures in research environment will also be discussed.

Concerns related to Safety Management of Engineered Nanomaterials in research environment

Science.gov (United States)

Groso, A.; Meyer, Th

2013-04-01

Since the rise of occupational safety and health research on nanomaterials a lot of progress has been made in generating health effects and exposure data. However, when detailed quantitative risk analysis is in question, more research is needed, especially quantitative measures of workers exposure and standards to categorize toxicity/hazardousness data. In the absence of dose-response relationships and quantitative exposure measurements, control banding (CB) has been widely adopted by OHS community as a pragmatic tool in implementing a risk management strategy based on a precautionary approach. Being in charge of health and safety in a Swiss university, where nanomaterials are largely used and produced, we are also faced with the challenge related to nanomaterials' occupational safety. In this work, we discuss the field application of an in-house risk management methodology similar to CB as well as some other methodologies. The challenges and issues related to the process will be discussed. Since exact data on nanomaterials hazardousness are missing for most of the situations, we deduce that the outcome of the analysis for a particular process is essentially the same with a simple methodology that determines only exposure potential and the one taking into account the hazardousness of ENPs. It is evident that when reliable data on hazardousness factors (as surface chemistry, solubility, carcinogenicity, toxicity etc.) will be available, more differentiation will be possible in determining the risk for different materials. On the protective measures side, all CB methodologies are inclined to overprotection side, only that some of them suggest comprehensive protective/preventive measures and others remain with basic advices. The implementation and control of protective measures in research environment will also be discussed.

Taking ownership of safety. What are the active ingredients of safety coaching and how do they impact safety outcomes in critical offshore working environments?

Science.gov (United States)

Krauesslar, Victoria; Avery, Rachel E; Passmore, Jonathan

2015-01-01

Safety coaching interventions have become a common feature in the safety critical offshore working environments of the North Sea. Whilst the beneficial impact of coaching as an organizational tool has been evidenced, there remains a question specifically over the use of safety coaching and its impact on behavioural change and producing safe working practices. A series of 24 semi-structured interviews were conducted with three groups of experts in the offshore industry: safety coaches, offshore managers and HSE directors. Using a thematic analysis approach, several significant themes were identified across the three expert groups including connecting with and creating safety ownership in the individual, personal significance and humanisation, ingraining safety and assessing and measuring a safety coach's competence. Results suggest clear utility of safety coaching when applied by safety coaches with appropriate coach training and understanding of safety issues in an offshore environment. The current work has found that the use of safety coaching in the safety critical offshore oil and gas industry is a powerful tool in managing and promoting a culture of safety and care.

Coal Mine Health and Safety Regulation 2006 under the Coal Mine Health and Safety Act 2002

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-12-22

The aim of the Act is to secure the health, safety and welfare of people in connection with coal operations (which include all places of work where coal is mined and certain other places). The Regulation contains provisions about the following matters: (a) places of work to which the Act does not apply, (b) duties relating to health, welfare and safety at coal operations, including the following: (i) the nomination of the operator of a coal operation and the provision of health and safety information for incoming operators, (ii) the contents of health and safety management systems for coal operations, (iii) major hazards and the contents of major hazard management plans for coal operations, (iv) duties relating to contractors, (v) the contents of management structures and emergency management systems for coal operations, escape and rescue plans and fire fighting plans and high risk activities, (c) notifications, including (i) notification of incidents, (ii) inquiries, (iii) notification of other matters to the Chief Inspector), (d) aspects of safety at coal operations, including the following: (i) controlled materials, plants and practices, (ii) coal dust explosion prevention and suppression, (iii) ventilation at coal operations, (iv) escape from coal operations, (v) the operation of transport at coal operations, (vi) surveys and certified plans, (vii) employment at coal operations, (e) the licensing of certain activities, (f) competence standards, (g) the Coal Competence Board, (h) check inspectors, (i) exemptions from provisions of this Regulation, (j) the following miscellaneous matters concerning coal mine health and safety: (i) the keeping of records and reporting, (ii) penalties, the review of decisions by the Administrative Decisions Tribunal, fees and charges, consultation, information and other miscellaneous matters, (k) savings and transitional provisions.

Stepping Up Occupational Safety and Health Through Employee Participation.

Science.gov (United States)

Vaughan, Gary R.

1986-01-01

The effectiveness of the Occupational Safety and Health Act of 1970 is examined, and it is suggested that employee participation could help improve occupational safety and health in the future, through safety committees, safety circles, safety teams, and individual participation. (MSE)

Health and Safety Audit Design Manual

Energy Technology Data Exchange (ETDEWEB)

Ternes, Mark P. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Langley, Brandon R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Accawi, Gina K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Malhotra, Mini [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-10-01

The Health and Safety Audit is an electronic audit tool developed by the Oak Ridge National Laboratory to assist in the identification and selection of health and safety measures when a home is being weatherized (i.e., receiving home energy upgrades), especially as part of the US Department of Energy (DOE) Weatherization Assistance Program, or during home energy-efficiency retrofit or remodeling jobs. The audit is specifically applicable to existing single-family homes (including mobile homes), and is generally applicable to individual dwelling units in low-rise multifamily buildings. The health and safety issues covered in the audit are grouped in nine categories: mold and moisture, lead, radon, asbestos, formaldehyde and volatile organic compounds (VOCs), combustion, pest infestation, safety, and ventilation. Development of the audit was supported by the US Department of Housing and Urban Development Office of Healthy Homes and Lead Hazard Control and the DOE Weatherization Assistance Program.

A CONCEPTUAL DISASTER RISK REDUCTION FRAMEWORK FOR HEALTH AND SAFETY HAZARDS IN THE CONSTRUCTION INDUSTRY

Directory of Open Access Journals (Sweden)

Amir S. GOHARDANI

2013-06-01

Full Text Available The health and safety hazard status of construction workers is constantly challenged by the projects in the built environment. In this article, various aspects of health and safety hazards for construction workers have been reviewed and investigated through a disaster risk reduction prism. This approach has further led to the perception of glancing at the construction sector as an ongoing disaster zone and equally provides a new management perspective. From this perspective, the occurrence of a disaster within the construction sector corresponds to the temporary or permanent ill-health or death of a construction worker. Geographical location is one of the factors that play an important role in addressing the health and safety hazards for construction workers. In addition to the location, geographical considerations equally encapsulate regional, cultural, governmental and work ethical effects. These effects may potentially contribute to disparities in the construction sector. With an increasing level of understanding for health and safety hazards in the construction domain, more efficient prevention measures can be taken in order to enable a disaster management cycle, capable of responding to the rigorous demands of the construction sector.

Environment, Health and Safety (EH&S): Division Liaisons

Science.gov (United States)

. Israel Tadesse Chemical Sciences x4043 Cell: 610-0856 Maram Kassis Electronic waste (E-waste) pickup or Source Representative 2231, 2014 Scott E. Taylor Chemical Safety Subcommittee Chairperson 4103 Hendrik Representative 7457 Stephen M. Franaszek Genomics Representative 925-296-5807 Vera Potapenko Marcia Ocon Leimer

Industrial Safety and Applied Health Physics Division annual report for 1981

International Nuclear Information System (INIS)

Auxier, J.A.; Oakes, T.W.

1982-08-01

Activities over the past year are summarized for the Health Physics Department, the Environmental Management Program, and the Safety Department. The Health Physics Department conducts radiation and safety surveys, provides personnel monitoring services for both external and internal radiation, and procures, services, and calibrates appropriate portable and stationary health physics instruments. It was determined that the maximum whole-body dose sustained by an employee was about 3.8 rems, which is 76% of the applicable standard of 5 rems. The greatest cumulative dose to the skin of the whole body received by an employee during 1981 was about 5.9 rems, or 39% of the applicable standard of 15 rems. Atmospheric iodine sampled by the Department of Environmental Management at the perimeter stations averged 0.13E to 14 μCi/cc during 1981. This average represents 131 I released to uncontrolled areas. All air samples taken had values below the allowable standards. The concentrations of 90 Sr in milk from both the immediate and remote environs of ORNL are also within FRC range I. The average value of 1.5 E to 9 μCi/mL represents 0.5% of the CG/sub w/ for drinking water applicable to individuals in the general population. The Safety Department reported that the continuing emphasis on safety during CY 1981 resulted in significant improvements in the ORNL safety program: safety performance was better than all CY 1981 on-the-job injury and illness goals. Through December 31, 1981, the Laboratory had worked 600 days and accumulated 14,015,826 exposure-hours since the last lost-work-day case

Tank farm health and safety plan. Revision 2

International Nuclear Information System (INIS)

Mickle, G.D.

1995-01-01

This Tank Farm Health and Safety Plan (HASP) for the conduct of all operations and work activities at the Hanford Site 200 Area Tank Farms is provided in order to minimize health and safety risks to workers and other onsite personnel. The HASP accomplishes this objective by establishing requirements, providing general guidelines, and conveying farm and facility-specific hazard communication information. The HASP, in conjunction with the job-specific information required by the HASP, is provided also as a reference for use during the planning of work activities at the tank farms. This HASP applies to Westinghouse Hanford Company (WHC), other prime contractors to the U.S. Department of Energy (DOE), and subcontractors to WHC who may be involved in tank farm work activities. This plan is intended to be both a requirements document and a useful reference to aid tank farm workers in understanding the safety and health issues that are encountered in routine and nonroutine work activities. The HASP defines the health and safety responsibilities of personnel working at the tank farms. It has been prepared in recognition of and is consistent with National Institute of Safety and Health (NIOSH), and Occupational Safety and Health Administration (OSHA)/Unlimited State Coast Guard (USCG)/U.S. Environmental Protection Agency (EPA), Occupational Safety and Health Guidance Manual for Hazardous Waste Site Activities (NIOSH 1985); WHC-CM-4-3, Industrial Safety Manual, Volume 4, open-quotes Health and Safety Programs for Hazardous Waste Operations;close quotes 29 CFR 1910.120, Hazardous Waste Operations and Emergency Response; WHC-CM-1-1, Management Policies; and WHC-CM-1-3, Management Requirements and Procedures. When differences in governing regulations or policies exist, the more stringent requirements shall apply until the discrepancy can be resolved

Tank farm health and safety plan. Revision 2

Energy Technology Data Exchange (ETDEWEB)

Mickle, G.D.

1995-03-29

This Tank Farm Health and Safety Plan (HASP) for the conduct of all operations and work activities at the Hanford Site 200 Area Tank Farms is provided in order to minimize health and safety risks to workers and other onsite personnel. The HASP accomplishes this objective by establishing requirements, providing general guidelines, and conveying farm and facility-specific hazard communication information. The HASP, in conjunction with the job-specific information required by the HASP, is provided also as a reference for use during the planning of work activities at the tank farms. This HASP applies to Westinghouse Hanford Company (WHC), other prime contractors to the U.S. Department of Energy (DOE), and subcontractors to WHC who may be involved in tank farm work activities. This plan is intended to be both a requirements document and a useful reference to aid tank farm workers in understanding the safety and health issues that are encountered in routine and nonroutine work activities. The HASP defines the health and safety responsibilities of personnel working at the tank farms. It has been prepared in recognition of and is consistent with National Institute of Safety and Health (NIOSH), and Occupational Safety and Health Administration (OSHA)/Unlimited State Coast Guard (USCG)/U.S. Environmental Protection Agency (EPA), Occupational Safety and Health Guidance Manual for Hazardous Waste Site Activities (NIOSH 1985); WHC-CM-4-3, Industrial Safety Manual, Volume 4, {open_quotes}Health and Safety Programs for Hazardous Waste Operations;{close_quotes} 29 CFR 1910.120, Hazardous Waste Operations and Emergency Response; WHC-CM-1-1, Management Policies; and WHC-CM-1-3, Management Requirements and Procedures. When differences in governing regulations or policies exist, the more stringent requirements shall apply until the discrepancy can be resolved.

Studies on environment safety and application of advanced reactor for inland nuclear power plants

International Nuclear Information System (INIS)

Wei, L.; Jie, L.

2014-01-01

To study environment safety assessment of inland nuclear power plants (NPPs), the impact of environment safety under the normal operation was researched and the environment risk of serious accidents was analyzed. Moreover, the requirements and relevant provisions of site selection between international nuclear power plant and China's are comparatively studied. The conclusion was that the environment safety assessment of inland and coastal nuclear power plant have no essential difference; the advanced reactor can meet with high criteria of environment safety of inland nuclear power plants. In this way, China is safe and feasible to develop inland nuclear power plant. China's inland nuclear power plants will be as big market for advanced reactor. (author)

Implementation of safety driving system using e-health and telematics technology.

Science.gov (United States)

Lee, Youngbum; Lee, Myoungho

2008-08-01

This research aimed to develop a safety driving system using e-health and telematics technology. Biosignal sensors were installed in an automobile to check the driver's health status with an automatic diagnosis system providing health information to the driver. Measured data were sent to the e-health center through a telematics device, and a medical doctor analyzed these data, sending diagnosis and prescription information to the driver. This system recognizes the driver's sleeping, drinking impairment, excitability, and fatigue using biosensors. The system initially provides alerts in the automobile. It also controls the driving environment in the car, searches for a highway service area using Global Positioning System (GPS), and provides additional information for safety driving. If a car accident has occurred, it makes an emergency call to the nearest hospital, emergency center, and insurance company. A conceptual and prototype model for an imbedded system is presented with initial data for driver condition. Such a system could prevent car accidents caused by drivers driving while intoxicated and falling asleep at the wheel using the driver's biosignals measured by biosensors. The system can provide various e-health services using a telematics system to enhance the technical compatibility of the automobile.

Environmental Health and Safety Status of Schools: Case Study in Paveh City of Kermanshah Province

Directory of Open Access Journals (Sweden)

Seyyed Alireza Mousavi

2017-10-01

Full Text Available Background & Aims of the Study: A most part of children time is spent in a school environment. Important part of the basic mission of schools is promoting the health and safety. So assessing the existing conditions is an important factor in promotion and this study conducted to investigate the environmental health and safety status of Paveh city schools in Kermanshah province. Materials & Methods: This is a descriptive-cross sectional study and has performed in Paveh city of Kermanshah province. The study population consisted of primary, secondary and high schools of Paveh city. Data has been collated by referring to schools, direct observation and completion of environmental health and safety checklist. Schools conditions were determined according to the environmental health and safety checklist in desirable, semi-desirable and undesirable. The collected data were analyzed using Excel software, and data means and frequencies sign in tables and were drawn by charts. Results: From the 28 schools have visited 35.6% of school building is old and 63.7% of school building is new built. In the study of all schools in 8% of schools environmental health status were undesirable and in 21% semi-desirable and in 71% were desirable, also safety status in 4% of all schools were undesirable  and in 21% semi-desirable and in 75% were desirable. Undesirable safety conditions related to adjacent to waste accumulation areas, brick buildings without footing beam, inappropriate distance of  first row bench from the boards, lack of green spaces Conclusion: Given the importance of safety in schools, more attention should be paid to this issue. It is essential to compliance with the principles of health and safety in schools, also any consideration and action in this field can be effective in reducing the risk of many related health problems.

Oswer integrated health and safety standard operating practices. Directive

International Nuclear Information System (INIS)

1993-02-01

The directive implements the OSWER (Office of Solid Waste and Emergency Response) Integrated Health and Safety Standards Operating Practices in conjunction with the OSHA (Occupational Safety and Health Act) Worker Protection Standards, replacing the OSWER Integrated Health and Safety Policy

Recent Cases: Administrative Law--Occupational Safety and Health Act

Science.gov (United States)

Harvard Law Review, 1976

1976-01-01

Implications of the Occupational Safety and Health Act of 1970 are described in two cases: Brennan v. Occupational Safety and Health Review Commission (Underhill Construction Corp.), and Anning-Johnson Co. v. United States Occupational Safety and Health Review Commission. (LBH)

Improving safety culture through the health and safety organization: a case study.

Science.gov (United States)

Nielsen, Kent J

2014-02-01

International research indicates that internal health and safety organizations (HSO) and health and safety committees (HSC) do not have the intended impact on companies' safety performance. The aim of this case study at an industrial plant was to test whether the HSO can improve company safety culture by creating more and better safety-related interactions both within the HSO and between HSO members and the shop-floor. A quasi-experimental single case study design based on action research with both quantitative and qualitative measures was used. Based on baseline mapping of safety culture and the efficiency of the HSO three developmental processes were started aimed at the HSC, the whole HSO, and the safety representatives, respectively. Results at follow-up indicated a marked improvement in HSO performance, interaction patterns concerning safety, safety culture indicators, and a changed trend in injury rates. These improvements are interpreted as cultural change because an organizational double-loop learning process leading to modification of the basic assumptions could be identified. The study provides evidence that the HSO can improve company safety culture by focusing on safety-related interactions. © 2013. Published by Elsevier Ltd and National Safety Council.

Assessment of the effects of the zero gravity environment on the health and safety of space workers. Summary report

Energy Technology Data Exchange (ETDEWEB)

1980-02-18

A review was conducted of currently available information relating to adverse effects to the health and safety that SPS space workers may experience. Currently available information on the responses of humans to space flight is somewhat limited and was obtained under conditions which are grossly different from conditions to be experienced by future space workers. The limitations in information and differences in conditions have been considered in the assessment of potential health and safety hazards to the SPS space workers. The study did not disclose any adverse effects that would result in long term deviations to the medical or physiological health of space workers so long as proper preventive or ameleorating actions were taken.

Steel Erection Safety. Module SH-39. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on steel erection safety is one of 50 modules concerned with job safety and health. This module identifies typical jobsite hazards encountered by steel erectors, as well as providing safe job procedures for general and specific construction activities. Following the introduction, 11 objectives (each keyed to a page in the text)…

Advanced Korean Industrial Safety and Health Policy with Risk Assessment

Directory of Open Access Journals (Sweden)

Hyuckmyun Kwon

2010-09-01

Full Text Available This article describes a systematic roadmap master plan for advanced industrial safety and health policy in Korea, with an emphasis on. Since Korean industries had first emergence of industrial safety and health policy in 1953, enormous efforts have been made on upgrading the relevant laws in order to reflect real situation of industrial work environment in accordance with rapid changes of Korean and global business over three decades. Nevertheless, current policy has major defects; too much techniques-based articles, diverged contents in less organization, combined enforcement and punishments and finally enforcing regulations full of commands and control. These deficiencies have make it difficult to accommodate changes of social, industrial and employment environment in customized fashion. The approach to the solution must be generic at the level of paradigm- shift rather than local modifications and enhancement. The basic idea is to establish a new system integrated with a risk assessment scheme, which encourages employers to apply to their work environment under comprehensive responsibility. The risk assessment scheme is designed to enable to inspect employers’ compliances afterwards. A project comprises four yearly phases based on applying zones; initially designating and operating a specified risk zone, gradually expanding the special zones during a period of 3 years (2010-2012 and the final zone expanded to entire nation. In each phase, the intermediate version of the system is updated through a process of precise and unbiased validation in terms of its operability, feasibility and sustainability with building relevant infrastructures as needed.

Site health and safety plan/work plan for further characterization of waste drums at Oak Ridge National Laboratory, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

Abston, J.P.; Burman, S.N.; Jones, D.L.

1995-10-01

The health and safety plan/work plan describes a strategy for characterizing the contents of 172 liquid waste and 33 solid waste drums. It also addresses the control measures that will be taken to (1) prevent or minimize any adverse impact on the environment or personnel safety and health and (2) meet standards that define acceptable management of hazardous and radioactive materials and wastes. When writing this document, the authors considered past experiences, recommendations, and best management practices to minimize possible hazards to human health or the environment from events such as fires, explosions, falls, mechanical hazards, or unplanned releases of hazardous or radioactive materials to air, soil, or surface water

Uncertain safety: allocating responsibilities for safety

National Research Council Canada - National Science Library

2009-01-01

Flood prevention, food safety, the transport of hazardous substances, infectious diseases, the risk of new Technologies and many other threats to public health and the environment call for ongoing public alertness...

78 FR 54923 - Federal Advisory Council on Occupational Safety and Health

Science.gov (United States)

2013-09-06

... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2013-0013] Federal Advisory Council on Occupational Safety and Health AGENCY: Occupational Safety and Health... Occupational Safety and Health (FACOSH). SUMMARY: The Assistant Secretary of Labor for Occupational Safety and...

Health and Safety annual report 1993

International Nuclear Information System (INIS)

1994-01-01

In the 1993 Health and Safety Report for BNFL, data showing improvements in radiological and conventional safety are given. Other aspects discussed are emergency planning, the level of incidents, occupational health services, litigation and the compensation scheme, the transport of radioactive materials, research covering transgenerational epidemiology, mortality and cancer studies, genetics and radiobiology, and dosimetry, and finally a summary of radioactive discharges and environmental data. (UK)

Environment and health

Energy Technology Data Exchange (ETDEWEB)

Paert, P. (and others)

2005-07-01

Public concerns, evidence from research and increasing scientific knowledge are all driving widespread discussions on environment and health problems. The issue of environment and health is characterised by multi-causality with different strengths of association. This means that the links between exposures and their health consequences depend on the environmental pollutants and diseases being considered, but are also influenced by factors such as genetic constitution, age, nutrition and lifestyle, and socioeconomic factors such as poverty and level of education. Chapter headings are: Introduction; Environmental burden of disease; Respiratory disease, asthma and allergies; Cancer; Neurodevelopmental disorders; Endocrine disruption; Body burden of chemicals; Wildlife as early warning signals for human impacts; and Climate change and health. 35 refs., 12 figs., 3 tabs.

Nursing Workload and the Changing Health Care Environment: A Review of the Literature

Science.gov (United States)

Neill, Denise

2011-01-01

Changes in the health care environment have impacted nursing workload, quality of care, and patient safety. Traditional nursing workload measures do not guarantee efficiency, nor do they adequately capture the complexity of nursing workload. Review of the literature indicates nurses perceive the quality of their work has diminished. Research has…

Safety and Health in Nuclear Malaysia workplace

International Nuclear Information System (INIS)

Wo, Y.M.

2013-01-01

Safety and health at work place is essential to ensure the health of their workers as required under the Occupational Safety and Health Act 1994 (Act 514). In Malaysian Nuclear Agency, each building / block was appointed with one/ two supervisors, known as Area Supervisor to ensure the safety of buildings / blocks. The area supervisor will conduct periodic bimonthly inspections of the building / block under their supervision. This paper presents the results of the inspection of 80 supervisors over 45 buildings / blocks at the Malaysian Nuclear Agency for the first six months of the year 2013. (author)

Health and Safety Plan for Waste Area Grouping 6 at Oak Ridge National Laboratory, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

Van Hoesen, S.D.; Clark, C. Jr.; Burman, S.N.; Manis, L.W.; Barre, W.L.

1993-12-01

The Martin Marietta Energy Systems, Inc. (Energy Systems), policy is to provide a safe and healthful workplace for all employees and subcontractors. The accomplishment of this policy requires that operations at Waste Area Grouping (WAG) 6 at the Department of Energy (DOE) Oak Ridge National Laboratory are guided by an overall plan and consistent proactive approach to safety and health (S ampersand H) issues. The plan is written to utilize past experience and best management practices to minimize hazards to human health or the environment from events such as fires, explosions, falls, mechanical hazards, or any unplanned release of hazardous or radioactive materials to air, soil, or surface water This plan explains additional site-specific health and safety requirements such as Site Specific Hazards Evaluation Addendums (SSHEAs) to the Site Safety and Health Plan which should be used in concert with this plan and existing established procedures

Occupational Safety and Health in Peru.

Science.gov (United States)

Cruz, Ismael; Huerta-Mercado, Raul

2015-01-01

Peru is a country located on the Pacific coast of South America with a population of more than 30 million inhabitants. In the past 10 years, Peru has had a steady economic growth. Peru is predominantly an extractive industry country, but the manufacturing and construction sectors are booming. It is in this context that regulations have been implemented to protect the safety and health of workers. One of the most important regulations is the Law on Safety and Health at Work, which has been recently promulgated. Regulations are complemented by training and education in occupational safety and health. The measures are yet to be fully implemented thus a positive effect in reducing accidents and occupational diseases at work has not yet been seen. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

75 FR 44967 - National Institute for Occupational Safety and Health

Science.gov (United States)

2010-07-30

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institute for Occupational Safety and Health... Occupational Safety and Health (NIOSH), Department of Health and Human Services (HHS). ACTION: Notice. SUMMARY... Occupational Safety and Health (NIOSH), 4676 Columbia Parkway, MS C-46, Cincinnati, OH 45226, Telephone 877-222...

Electrical safety in health care area

International Nuclear Information System (INIS)

Amer, G.M.

2011-01-01

An electrical safety in health care area is necessary to protect patients and staff from potential electrical hazards.Functional, accurate and safe clinical equipment is an essential requirement in the provision of health services. Well-maintained equipment will give clinicians greater confidence in the reliability of its performance and contribute to a high standard of client care. Clinical equipment, like all health services, requires annual or periodic servicing of medical equipment. In addition to planned servicing and preventative maintenance, there may be the unexpected failure of medical (and other) equipment, necessitating repair. In general, clinical equipment that has an electrical power source and has direct contact with the client must be serviced as a first priority. In this presentation, a review of the main concepts related to the electrical safety in health area,theinternational standard, the distribution of electric power in hospital and protection against shockwill be introduced. Protection system in hospital will be presented in its two ways: inpower distribution in hospitaland inbiomedical equipment design,finally the optimum maintenance technology and safety tests in health care areawill presented also.

Heavy metals contamination: implications for health and food safety

Directory of Open Access Journals (Sweden)

Yulieth C. Reyes

2016-07-01

Full Text Available Contamination by heavy metals in water resources, soil and air poses one of the most severe problems that compromise food safety and public health at global and local level. In this review, the specific problem of contamination by mercury (Hg, arsenic (As, cadmium (Cd and lead (Pb in the environment and food is presented. A description of the sources of contamination, exposure in living beings, accumulation and retention in food and consumer products is carried out. Study cases and results in some countries included Colombia are discussed.

Framework for continuous assessment and improvement of occupational health and safety issues in construction companies.

Science.gov (United States)

Mahmoudi, Shahram; Ghasemi, Fakhradin; Mohammadfam, Iraj; Soleimani, Esmaeil

2014-09-01

Construction industry is among the most hazardous industries, and needs a comprehensive and simple-to-administer tool to continuously assess and promote its health and safety performance. Through the study of various standard systems (mainly Health, Safety, and Environment Management System; Occupational Health and Safety Assessment Series 180001; and British Standard, occupational health and safety management systems-Guide 8800), seven main elements were determined for the desired framework, and then, by reviewing literature, factors affecting these main elements were determined. The relative importance of each element and its related factors was calculated at organizational and project levels. The provided framework was then implemented in three construction companies, and results were compared together. THE RESULTS OF THE STUDY SHOW THAT THE RELATIVE IMPORTANCE OF THE MAIN ELEMENTS AND THEIR RELATED FACTORS DIFFER BETWEEN ORGANIZATIONAL AND PROJECT LEVELS: leadership and commitment are the most important elements at the organization level, whereas risk assessment and management are most important at the project level. The present study demonstrated that the framework is easy to administer, and by interpreting the results, the main factors leading to the present condition of companies can be determined.

One health and food safety

DEFF Research Database (Denmark)

Wielinga, Peter; Schlundt, Jørgen

2014-01-01

Many, if not most, of all important zoonoses relate in some way to animals in the food production chain. Therefore food becomes an important vehicle for many zoonotic pathogens. One of the major issues in food safety over the latest decades has been the lack of cross-sectoral collaboration across...... the food production chain. Major food safety events have been significantly affected by the lack of collaboration between the animal health, the food control, and the human health sector. One Health formulates clearly both the need for, and the benefit of cross-sectoral collaboration. Here we will focus...... on the human health risk related to zoonotic microorganisms present both in food animals and food derived from these animals, and typically transmitted to humans through food. Some diseases have global epidemic- or pandemic-potential, resulting in dramatic action from international organizations and national...

Industrial Safety and Applied Health Physics Division annual report for 1981

Energy Technology Data Exchange (ETDEWEB)

Auxier, J.A.; Oakes, T.W.

1982-08-01

Activities over the past year are summarized for the Health Physics Department, the Environmental Management Program, and the Safety Department. The Health Physics Department conducts radiation and safety surveys, provides personnel monitoring services for both external and internal radiation, and procures, services, and calibrates appropriate portable and stationary health physics instruments. It was determined that the maximum whole-body dose sustained by an employee was about 3.8 rems, which is 76% of the applicable standard of 5 rems. The greatest cumulative dose to the skin of the whole body received by an employee during 1981 was about 5.9 rems, or 39% of the applicable standard of 15 rems. Atmospheric iodine sampled by the Department of Environmental Management at the perimeter stations averged 0.13E to 14 ..mu..Ci/cc during 1981. This average represents < 0.005% of the concentration guide of 1E to 10 ..mu..Ci/cc applicable to inhalation of /sup 131/I released to uncontrolled areas. All air samples taken had values below the allowable standards. The concentrations of /sup 90/Sr in milk from both the immediate and remote environs of ORNL are also within FRC range I. The average value of 1.5 E to 9 ..mu..Ci/mL represents 0.5% of the CG/sub w/ for drinking water applicable to individuals in the general population. The Safety Department reported that the continuing emphasis on safety during CY 1981 resulted in significant improvements in the ORNL safety program: safety performance was better than all CY 1981 on-the-job injury and illness goals. Through December 31, 1981, the Laboratory had worked 600 days and accumulated 14,015,826 exposure-hours since the last lost-work-day case.

Occupational health and safety: Designing and building with MACBETH a value risk-matrix for evaluating health and safety risks

Science.gov (United States)

Lopes, D. F.; Oliveira, M. D.; Costa, C. A. Bana e.

2015-05-01

Risk matrices (RMs) are commonly used to evaluate health and safety risks. Nonetheless, they violate some theoretical principles that compromise their feasibility and use. This study describes how multiple criteria decision analysis methods have been used to improve the design and the deployment of RMs to evaluate health and safety risks at the Occupational Health and Safety Unit (OHSU) of the Regional Health Administration of Lisbon and Tagus Valley. ‘Value risk-matrices’ (VRMs) are built with the MACBETH approach in four modelling steps: a) structuring risk impacts, involving the construction of descriptors of impact that link risk events with health impacts and are informed by scientific evidence; b) generating a value measurement scale of risk impacts, by applying the MACBETH-Choquet procedure; c) building a system for eliciting subjective probabilities that makes use of a numerical probability scale that was constructed with MACBETH qualitative judgments on likelihood; d) and defining a classification colouring scheme for the VRM. A VRM built with OHSU members was implemented in a decision support system which will be used by OHSU members to evaluate health and safety risks and to identify risk mitigation actions.

Measuring Best Practices for Workplace Safety, Health, and Well-Being: The Workplace Integrated Safety and Health Assessment.

Science.gov (United States)

Sorensen, Glorian; Sparer, Emily; Williams, Jessica A R; Gundersen, Daniel; Boden, Leslie I; Dennerlein, Jack T; Hashimoto, Dean; Katz, Jeffrey N; McLellan, Deborah L; Okechukwu, Cassandra A; Pronk, Nicolaas P; Revette, Anna; Wagner, Gregory R

2018-05-01

To present a measure of effective workplace organizational policies, programs, and practices that focuses on working conditions and organizational facilitators of worker safety, health and well-being: the workplace integrated safety and health (WISH) assessment. Development of this assessment used an iterative process involving a modified Delphi method, extensive literature reviews, and systematic cognitive testing. The assessment measures six core constructs identified as central to best practices for protecting and promoting worker safety, health and well-being: leadership commitment; participation; policies, programs, and practices that foster supportive working conditions; comprehensive and collaborative strategies; adherence to federal and state regulations and ethical norms; and data-driven change. The WISH Assessment holds promise as a tool that may inform organizational priority setting and guide research around causal pathways influencing implementation and outcomes related to these approaches.

Does Employee Safety Matter for Patients Too? Employee Safety Climate and Patient Safety Culture in Health Care.

Science.gov (United States)

Mohr, David C; Eaton, Jennifer Lipkowitz; McPhaul, Kathleen M; Hodgson, Michael J

2015-04-22

We examined relationships between employee safety climate and patient safety culture. Because employee safety may be a precondition for the development of patient safety, we hypothesized that employee safety culture would be strongly and positively related to patient safety culture. An employee safety climate survey was administered in 2010 and assessed employees' views and experiences of safety for employees. The patient safety survey administered in 2011 assessed the safety culture for patients. We performed Pearson correlations and multiple regression analysis to examine the relationships between a composite measure of employee safety with subdimensions of patient safety culture. The regression models controlled for size, geographic characteristics, and teaching affiliation. Analyses were conducted at the group level using data from 132 medical centers. Higher employee safety climate composite scores were positively associated with all 9 patient safety culture measures examined. Standardized multivariate regression coefficients ranged from 0.44 to 0.64. Medical facilities where staff have more positive perceptions of health care workplace safety climate tended to have more positive assessments of patient safety culture. This suggests that patient safety culture and employee safety climate could be mutually reinforcing, such that investments and improvements in one domain positively impacts the other. Further research is needed to better understand the nexus between health care employee and patient safety to generalize and act upon findings.

Proceeding of Radiation Safety and Environment; Prosiding Presentasi Ilmiah Keselamatan Radiasi dan Lingkungan

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-07-01

Scientific Presentation of Radiation Safety and Environment was held on 20-21 august 1996 at Center of Research Atomic Energy Pasar Jum'at, Jakarta, Indonesia. Have presented 50 papers about Radiation Safety, dosimetry and standardization, environment protection and radiation effect.

Stennis Space Center observes 2009 Safety and Health Day

Science.gov (United States)

2009-01-01

Sue Smith, a medical clinic employee at NASA's John C. Stennis Space Center, takes the temperature of colleague Karen Badon during 2009 Safety and Health Day activities Oct. 22. Safety Day activities included speakers, informational sessions and a number of displays on safety and health issues. Astronaut Dominic Gorie also visited the south Mississippi rocket engine testing facility during the day to address employees and present several Silver Snoopy awards for outstanding contributions to flight safety and mission success. The activities were part of an ongoing safety and health emphasis at Stennis.

Occupational Safety and Health Programs in Career Education.

Science.gov (United States)

DiCarlo, Robert D.; And Others

This resource guide was developed in response to the Occupational Safety and Health Act of 1970 and is intended to assist teachers in implementing courses in occupational safety and health as part of a career education program. The material is a synthesis of films, programed instruction, slides and narration, case studies, safety pamphlets,…

The impact of health information technology on patient safety

Directory of Open Access Journals (Sweden)

Yasser K. Alotaibi

2017-12-01

Full Text Available Since the original Institute of Medicine (IOM report was published there has been an accelerated development and adoption of health information technology with varying degrees of evidence about the impact of health information technology on patient safety. This article is intended to review the current available scientific evidence on the impact of different health information technologies on improving patient safety outcomes. We conclude that health information technology improves patient’s safety by reducing medication errors, reducing adverse drug reactions, and improving compliance to practice guidelines. There should be no doubt that health information technology is an important tool for improving healthcare quality and safety. Healthcare organizations need to be selective in which technology to invest in, as literature shows that some technologies have limited evidence in improving patient safety outcomes.

The impact of health information technology on patient safety.

Science.gov (United States)

Alotaibi, Yasser K; Federico, Frank

2017-12-01

Since the original Institute of Medicine (IOM) report was published there has been an accelerated development and adoption of health information technology with varying degrees of evidence about the impact of health information technology on patient safety.  This article is intended to review the current available scientific evidence on the impact of different health information technologies on improving patient safety outcomes. We conclude that health information technology improves patient's safety by reducing medication errors, reducing adverse drug reactions, and improving compliance to practice guidelines. There should be no doubt that health information technology is an important tool for improving healthcare quality and safety. Healthcare organizations need to be selective in which technology to invest in, as literature shows that some technologies have limited evidence in improving patient safety outcomes.

78 FR 64504 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2013-10-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH or..., Number 177, Pages 56235-56236. Contact Person for More Information: Price Connor, Ph.D., NIOSH Health...

Managing preventive occupational health and safety activities in Danish enterprises during a period of financial crisis

DEFF Research Database (Denmark)

Andersen, Hans H. K.; Bach, Elsa

2017-01-01

The onset of the financial crisis in 2008 has put pressure on enterprises that in turn have downsized and reorganized. Research has shown that economic recession has an effect on psychological and behavioral health that is attributed to working environment problems. The objective of this study is...... focus on the management of preventive workplace health and safety activities in enterprises during a period of economic recession....... is to unravel whether the onset of a general economic recession has had an impact on companies’ and public institutions’ preventive occupational health and safety activities. Hypotheses of the role of pro-cyclical and countercyclical effects are presented. This study is based on a survey of enterprise...... preventive occupational health safety activities. The baseline for the survey was established, in 2006 before the onset of the recession, with a follow up in 2011. Findings are discussed that support both the pro-cyclical and the countercyclical hypotheses. It is concluded that there is a need for a special...

10 CFR 871.2 - Public health and safety exemption.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Public health and safety exemption. 871.2 Section 871.2 Energy DEPARTMENT OF ENERGY AIR TRANSPORTATION OF PLUTONIUM § 871.2 Public health and safety exemption... property damage, or other significant threat to the public health and safety. [42 FR 48332, Sept. 23, 1977...

A study on development strategy of atomic safety organization for atomic environment

Energy Technology Data Exchange (ETDEWEB)

Lee, Sung Bok; Jeong, Ji Hun; Kim Tae Hee; Lee, Seung Hyuk; Woo, Eun Jung [Konkuk Univ., Seoul (Korea, Republic of)

2005-02-15

The objective of this research is to suggest some strategies which can make the safety of atomic power possible and reinforce the nuclear regulatory system. It will contribute to the expansion and settlement of nuclear safety culture by making the public understand well about the safety of nuclear energy, and searching public relations and incentive strategies. In addition, since the nuclear environment is changing rapidly, the necessity of cooperation between the public and the private has veen mostly required. So we need to develop the effective administrative system based on their cooperation. Therefore, it will examine the function of organization established, operation system, and also social network closely connected with the nuclear safety. Moreover, by analyzing the change of regulatory environment and present safety confirmation of nuclear energy, it will devise the new safety confirmation system of nuclear energy.

76 FR 60535 - Federal Advisory Council on Occupational Safety and Health

Science.gov (United States)

2011-09-29

... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA--2011-0116] Federal Advisory Council on Occupational Safety and Health AGENCY: Occupational Safety and Health... the Federal Advisory Council on Occupational Safety and Health (FACOSH) until October 31, 2011. DATES...

Gendered Safety and Health Risks in the Construction Trades.

Science.gov (United States)

Curtis, Hannah M; Meischke, Hendrika; Stover, Bert; Simcox, Nancy J; Seixas, Noah S

2018-04-18

Despite women's increased representation in the overall workforce, construction remains a male-dominated industry. Prior studies have noted that the hazardous workplace environment combined with a culture that can be discriminatory and openly hostile can threaten women workers' health and safety. However, little information exists about the current physical and psychosocial hazards at work affecting tradeswomen. We examined differences in workplace exposure between women and men, and the association of these exposures with self-reported stress and work injury, in order to highlight how gendered conditions of work negatively affect tradeswomen's health. A holistic view of health that included the influence of both home and work spheres as well as hazards related to women's social experience was considered. Almost 300 workers (198 tradeswomen and 93 tradesmen) throughout Washington State completed surveys. We used descriptive statistics to compare exposures between genders, and logistic regression to model the association between psychosocial exposures and injury and stress outcomes. We found that women were significantly more likely than men to report high perceived stress (31 and 18%, respectively) and being injured at work in the past year (31 and 12%, respectively). Ten of the 12 work-related psychosocial exposures were found to be associated with either stress (job strain, gender and age discrimination, bullying, work/life balance, isolation, sexual harassment, safety climate, and social support) or injury (gender discrimination, bullying, overcompensation, and sexual harassment) for women. The industry continues to lag in supporting tradeswomen's health and safety needs. This study suggests that multiple exposures (including discrimination, overcompensation, and work/life balance) have an important impact on worker well-being. The findings underscore the complex interaction of gender, psychosocial exposures, and occupational risks, and indicate areas for

[History of occupational health physician and industrial safety and health law].

Science.gov (United States)

Horie, Seichi

2013-10-01

In Japan, an employer of a workplace with 50 or more employees is legally required to assign an occupational health physician. The assignment rate in 2010 was reported as 87.0%. This policy started with the provision of "factory physician"in the Factory Law in 1938, then the Labour Standard Law stipulated "physician hygienist" in 1947, and finally the Industrial Safety and Health Law defined "occupational health physician" in 1972. In 1996, a revision of the law then required those physicians to complete training courses in occupational medicine, as designated by an ordinance. Historically, an on-site physician was expected to cure injuries and to prevent communicable diseases of factory workers. The means of occupational hygienic management by working environment measurements, etc., and of health management by health examinations, etc., were developed. Localized exhaust ventilation and personal protection equipment became widely utilized. Qualification systems for non-medical experts in occupational hygiene were structured, and relationships between employers and occupational health physicians were stipulated in the legislative documents. Currently, the Japan Medical Association and the University of Occupational and Environmental Health, Japan educate and train occupational health physicians, and the Japan Society for Occupational Health maintains a specialized board certification system for these physicians. In the future, additional efforts should be made to strengthen the expertise of occupational health physicians, to define and recognize the roles of non-medical experts in occupational hygiene, to incorporate occupational health services in small enterprises, to promote occupational health risk assessment in the workplace, and to reorganize the current legislation, amended repeatedly over the decades.

Occupational safety and health in the United kingdom: securing future workplace health and wellbeing.

Science.gov (United States)

Harrison, John

2012-01-01

The industrial revolution that took place in the United Kingdom (UK) between 1760 and 1830 lead to profound social change, with rapid urbanisation associated with squalid living conditions and epidemics of infectious diseases. The next 150 yr or so saw the introduction of many specific acts of health and safety legislation. In 1974 new overarching primary legislation was introduced that would produce a step change in the evolution of health and safety enforcement. In 2004, a new strategy was launched designed to promote a vision embedding health and safety as a cornerstone of a civilised society and to achieve a record of workplace health and safety that leads the world. Good progress in controlling many safety hazards and improving occupational hygiene has been made. There has been a fall in numbers of a wide range of injuries and diseases or illnesses since 2000. The challenge will be to maintain these favourable trends and prepare for new and emerging diseases at a time when resources are diminishing. The importance of occupational health within the UK health and safety strategy has been recognised over the last decade. Occupational health is developing a new paradigm which combines classical health risk management with assessment of workability, rehabilitation back to work and promotion of health and wellbeing. There is an increasing recognition that being in supported employment is good for health and reduces health inequalities.

75 FR 52988 - National Advisory Committee on Occupational Safety and Health

Science.gov (United States)

2010-08-30

... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0012] National Advisory Committee on Occupational Safety and Health AGENCY: Occupational Safety and Health... Occupational Safety and Health (NACOSH) will meet September 14 and 15, 2010, in Washington, DC. In conjunction...

48 CFR 1852.223-72 - Safety and Health (Short Form).

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Safety and Health (Short... and Clauses 1852.223-72 Safety and Health (Short Form). As prescribed in 1823.7001(e), insert the following clause: Safety and Health (Short Form) (APR 2002) (a) Safety is the freedom from those conditions...

Workplace safety and health for the veterinary health care team.

Science.gov (United States)

Gibbins, John D; MacMahon, Kathleen

2015-03-01

Veterinary clinic employers have a legal and ethical responsibility to provide a safe and healthy workplace. Clinic members are responsible for consistently using safe practices and procedures set up by their employer. Development and implementation of a customized comprehensive workplace safety and health program is emphasized, including an infection control plan. Occupational safety and health regulations are reviewed. The hazards of sharps, animal bites and scratches, and drugs are discussed. Strategies to prevent or minimize adverse health effects and resources for training and education are provided. Published by Elsevier Inc.

The Health and Safety Executive's regulatory framework for control of nuclear criticality safety

International Nuclear Information System (INIS)

Smith, K.; Simister, D.N.

1991-01-01

In the United Kingdom the Health and Safety at Work Act, 1974 is the main legal instrument under which risks to people from work activities are controlled. Certain sections of the Nuclear Installations Act, 1965 which deal with the licensing of nuclear sites and the regulatory control of risks arising from them, including the risk from accidental criticality, are relevant statutory provisions of the Health and Safety at Work Act. The responsibility for safety rests with the operator who has to make and implement arrangements to prevent accidental criticality. The adequacy of these arrangements must be demonstrated in a safety case to the regulatory authorities. Operators are encouraged to treat each plant on its own merits and develop the safety case accordingly. The Nuclear Installations Inspectorate (NII), for its part, assesses the adequacy of the operator's safety case against the industry's own standards and criteria, but more particularly against the NII's safety assessment principles and guides, and international standards. Risks should be made as low as reasonably practicable. Generally, the NII seeks improvements in safety using an enforcement policy which operates at a number of levels, ranging from persuasion through discussion to the ultimate deterrent of withdrawal of a site licence. This paper describes the role of the NII, which includes a specialist criticality expertise, within the Health and Safety Executive, in regulating the nuclear sites from the criticality safety viewpoint. (Author)

Work environment and safety climate in the Swedish merchant fleet.

Science.gov (United States)

Forsell, Karl; Eriksson, Helena; Järvholm, Bengt; Lundh, Monica; Andersson, Eva; Nilsson, Ralph

2017-02-01

To get knowledge of the work environment for seafarers sailing under the Swedish flag, in terms of safety climate, ergonomical, chemical and psychosocial exposures, and the seafarers self-rated health and work ability. A Web-based questionnaire was sent to all seafarers with a personal e-mail address in the Swedish Maritime Registry (N = 5608). Comparisons were made mainly within the study population, using Student's t test, prevalence odds ratios and logistic regressions with 95% confidence intervals. The response rate was 35% (N = 1972; 10% women, 90% men), with 61% of the respondents working on deck, 31% in the engine room and 7% in the catering/service department (1% not classifiable). Strain on neck, arm or back and heavy lifting were associated with female gender (p = 0.0001) and younger age (below or above 30 years of age, p harassment or bullying during last year of service. Noise, risk of accidents, hand/arm and whole-body vibrations and psychosocial factors such as harassment were commonly reported work environment problems among seafarers within the Swedish merchant fleet.

Workplace Safety and Health Topics: Safety & Prevention

Science.gov (United States)

... 1, 2018 Content source: National Institute for Occupational Safety and Health Education and Information Division Email Recommend Tweet YouTube Instagram Listen Watch RSS ABOUT About CDC Jobs Funding LEGAL Policies Privacy FOIA No Fear Act OIG 1600 Clifton Road Atlanta , GA 30329-4027 USA 800-CDC-INFO ( ...

Health, Safety and Environmental Risk Assessment in Laboratory Sites

Directory of Open Access Journals (Sweden)

2012-05-01

Full Text Available Introduction: ”Exposing to danger” or in other words, “risk” is a process which is led to an uncertain result in every field. Project risks are uncertain contingent events or situations that if they occur will have positive or negative effects on project’s objectives. Todays, research and educational process and more complicated and the professional risk management become much more difficult, as a result. .Material and Method: In this research, the health and safety issues have been studied and analyzed using ISO 14121 and the environmental issues by EMEA to determine the risk level separately for research laboratories and to prioritize corrective measure in each field (school. .Result: The finding in this study showed that from all the main risks within the rage of 38-86 percent have been decreased. Moreover average of the risk level for the health, safety and environment cases showed a significant decrease (Pvalue<0.0001 by implement controlling and protective countermeasures compariy to the priority state without any measures. . Conclusion: The risk assessment with hazards control strategy based on ISO 14121 is a compatible method in laboratory site as universities and other reasearch sites.

Patient safety goals for the proposed Federal Health Information Technology Safety Center.

Science.gov (United States)

Sittig, Dean F; Classen, David C; Singh, Hardeep

2015-03-01

The Office of the National Coordinator for Health Information Technology is expected to oversee creation of a Health Information Technology (HIT) Safety Center. While its functions are still being defined, the center is envisioned as a public-private entity focusing on promotion of HIT related patient safety. We propose that the HIT Safety Center leverages its unique position to work with key administrative and policy stakeholders, healthcare organizations (HCOs), and HIT vendors to achieve four goals: (1) facilitate creation of a nationwide 'post-marketing' surveillance system to monitor HIT related safety events; (2) develop methods and governance structures to support investigation of major HIT related safety events; (3) create the infrastructure and methods needed to carry out random assessments of HIT related safety in complex HCOs; and (4) advocate for HIT safety with government and private entities. The convening ability of a federally supported HIT Safety Center could be critically important to our transformation to a safe and effective HIT enabled healthcare system. © The Author 2014. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Surgical Safety Training of World Health Organization Initiatives.

Science.gov (United States)

Davis, Christopher R; Bates, Anthony S; Toll, Edward C; Cole, Matthew; Smith, Frank C T; Stark, Michael

2014-01-01

Undergraduate training in surgical safety is essential to maximize patient safety. This national review quantified undergraduate surgical safety training. Training of 2 international safety initiatives was quantified: (1) World Health Organization (WHO) "Guidelines for Safe Surgery" and (2) Department of Health (DoH) "Principles of the Productive Operating Theatre." Also, 13 additional safety skills were quantified. Data were analyzed using Mann-Whitney U tests. In all, 23 universities entered the study (71.9% response). Safety skills from WHO and DoH documents were formally taught in 4 UK medical schools (17.4%). Individual components of the documents were taught more frequently (47.6%). Half (50.9%) of the additional safety skills identified were taught. Surgical societies supplemented safety training, although the total amount of training provided was less than that in university curricula (P < .0001). Surgical safety training is inadequate in UK medical schools. To protect patients and maximize safety, a national undergraduate safety curriculum is recommended. © 2013 by the American College of Medical Quality.

An Evaluation of the Physical Environments of a Nuclear Power Plants for Human Factors Review in Periodic Safety Review

International Nuclear Information System (INIS)

Kim, Dae Ho; Lee, Yong Hee

2006-01-01

Currently, operation of a nuclear power plants(NPP) is highly emphasized by the integrity of the H/W and the human factors security, so the periodic safety review(PSR) is performed to NPP. The PSR activities on human factors include physical environments (illumination, noise, vibration, temperature and humidity etc). The review on these physical environments is to verify the possible affect to the human error during the operation of the man machine interface. Physical environments affect the health, job stress and job satisfaction of NPP's employees. On the ground of the reason, we need integrating the management program for the sufficient satisfaction of the regulatory basis and standards of physical environment and considering a health, a job stress and satisfaction of NPP's employees. So, this paper describes the planning of the setup procedures of physical environments and the adequate management program for the field applications in NPPs

An Evaluation of the Physical Environments of a Nuclear Power Plants for Human Factors Review in Periodic Safety Review

Energy Technology Data Exchange (ETDEWEB)

Kim, Dae Ho; Lee, Yong Hee [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

2006-07-01

Currently, operation of a nuclear power plants(NPP) is highly emphasized by the integrity of the H/W and the human factors security, so the periodic safety review(PSR) is performed to NPP. The PSR activities on human factors include physical environments (illumination, noise, vibration, temperature and humidity etc). The review on these physical environments is to verify the possible affect to the human error during the operation of the man machine interface. Physical environments affect the health, job stress and job satisfaction of NPP's employees. On the ground of the reason, we need integrating the management program for the sufficient satisfaction of the regulatory basis and standards of physical environment and considering a health, a job stress and satisfaction of NPP's employees. So, this paper describes the planning of the setup procedures of physical environments and the adequate management program for the field applications in NPPs.

Health by Design: Interweaving Health Promotion into Environments and Settings

Science.gov (United States)

Springer, Andrew E.; Evans, Alexandra E.; Ortuño, Jaquelin; Salvo, Deborah; Varela Arévalo, Maria Teresa

2017-01-01

The important influence of the environmental context on health and health behavior—which includes place, settings, and the multiple environments within place and settings—has directed health promotion planners from a focus solely on changing individuals, toward a focus on harnessing and changing context for individual and community health promotion. Health promotion planning frameworks such as Intervention Mapping provide helpful guidance in addressing various facets of the environmental context in health intervention design, including the environmental factors that influence a given health condition or behavior, environmental agents that can influence a population’s health, and environmental change methods. In further exploring how to harness the environmental context for health promotion, we examine in this paper the concept of interweaving of health promotion into context, defined as weaving or blending together health promotion strategies, practices, programs, and policies to fit within, complement, and build from existing settings and environments. Health promotion interweaving stems from current perspectives in health intervention planning, improvement science and complex systems thinking by guiding practitioners from a conceptualization of context as a backdrop to intervention, to one that recognizes context as integral to the intervention design and to the potential to directly influence health outcomes. In exploring the general approach of health promotion interweaving, we examine selected theoretical and practice-based interweaving concepts in relation to four key environments (the policy environment, the information environment, the social/cultural/organizational environment, and the physical environment), followed by evidence-based and practice-based examples of health promotion interweaving from the literature. Interweaving of health promotion into context is a common practice for health planners in designing health promotion interventions, yet

The costs of uncertainty: regulating health and safety in the Canadian uranium industry

International Nuclear Information System (INIS)

Robinson, I.

1982-04-01

Federalism, and particularly federal/provincial jurisdictional relationships, have led to considerable uncertainty in the regulation of occupational health and safety and of environmental protection in the Canadian uranium mining industry. The two principal uranium producing provinces in Canada are Saskatchewan and Ontario. Since 1978, in an attempt to avoid constitutional issues, both these provinces and the federal government as well have proceeded unilaterally with health and safety reforms for the industry. In Saskatchewan this has resulted in areas of overlapping jurisdiction, which have led to uncertainty over the legal enforceability of the provincial regulations. In Ontario, the province has left significant gaps in the protection of both workers and the environment. Little progress can be expected in eliminating these gaps and overlaps until the current administrative and jurisdictional arrangements are understood

Moving beyond command-and-control: reflexivity in the regulation of occupational safety and health and the environment.

NARCIS (Netherlands)

Aalders, M.V.C.; Wilthagen, T.

1997-01-01

Direct or "command-and-control" regulation has had limited success in dealing with occupational health and safety and with environmental regulation. This lack of success has led policymakers to experiment with self-regulation as an alternative means of achieving the goals of social regulation. The

The President's Report on Occupational Safety and Health.

Science.gov (United States)

Department of Health, Education, and Welfare, Washington, DC.

This report describes what has been done to implement the Occupational Safety and Health Act of 1970 during its first year of operation. The report examines the responsibilities of the Department of Labor for setting safety and health standards and also explores the activities of the Department of Health, Education, and Welfare in research and…

Nursing practice environment, job outcomes and safety climate: a structural equation modelling analysis.

Science.gov (United States)

Dos Santos Alves, Daniela Fernanda; da Silva, Dirceu; de Brito Guirardello, Edinêis

2017-01-01

To assess correlations between the characteristics of the nursing practice environment, job outcomes and safety climate. The nursing practice environment is critical to the well-being of professionals and to patient safety, as highlighted by national and international studies; however, there is a lack of evidence regarding this theme in paediatric units. A cross-sectional study, in two paediatric hospitals in Brazil, was conducted from December 2013 to February 2014. For data collection, we used the Nursing Work Index - Revised, Safety Attitudes Questionnaire - Short Form 2006 and the Maslach Burnout Inventory, and for analysis Spearman's correlation coefficient and structural equation modelling were used. Two hundred and sixty-seven professional nurses participated in the study. Autonomy, control over the work environment and the relationship between nursing and medical staff are factors associated with job outcomes and safety climate and can be considered their predictors. Professional nurses with greater autonomy, good working relationships and control over their work environment have lower levels of emotional exhaustion, higher job satisfaction, less intention of leaving the job and the safety climate is positive. Initiatives to improve the professional practice environment can improve the safety of paediatric patients and the well-being of professional nurses. © 2016 John Wiley & Sons Ltd.

Public Health Service Safety Program

Energy Technology Data Exchange (ETDEWEB)

McBride, J R [Southwestern Radiological Health Laboratory, Las Vegas, NV (United States)

1969-07-01

Off-Site Radiological Safety Programs conducted on past Plowshare experimental projects by the Southwestern Radiological Health Laboratory for the AEC will be presented. Emphasis will be placed on the evaluation of the potential radiation hazard to off-site residents, the development of an appropriate safety plan, pre- and post-shot surveillance activities, and the necessity for a comprehensive and continuing community relations program. In consideration of the possible wide use of nuclear explosives in industrial applications, a new approach to off-site radiological safety will be discussed. (author)

Public Health Service Safety Program

International Nuclear Information System (INIS)

McBride, J.R.

1969-01-01

Off-Site Radiological Safety Programs conducted on past Plowshare experimental projects by the Southwestern Radiological Health Laboratory for the AEC will be presented. Emphasis will be placed on the evaluation of the potential radiation hazard to off-site residents, the development of an appropriate safety plan, pre- and post-shot surveillance activities, and the necessity for a comprehensive and continuing community relations program. In consideration of the possible wide use of nuclear explosives in industrial applications, a new approach to off-site radiological safety will be discussed. (author)

Towards the Verification of Safety-critical Autonomous Systems in Dynamic Environments

Directory of Open Access Journals (Sweden)

Adina Aniculaesei

2016-12-01

Full Text Available There is an increasing necessity to deploy autonomous systems in highly heterogeneous, dynamic environments, e.g. service robots in hospitals or autonomous cars on highways. Due to the uncertainty in these environments, the verification results obtained with respect to the system and environment models at design-time might not be transferable to the system behavior at run time. For autonomous systems operating in dynamic environments, safety of motion and collision avoidance are critical requirements. With regard to these requirements, Macek et al. [6] define the passive safety property, which requires that no collision can occur while the autonomous system is moving. To verify this property, we adopt a two phase process which combines static verification methods, used at design time, with dynamic ones, used at run time. In the design phase, we exploit UPPAAL to formalize the autonomous system and its environment as timed automata and the safety property as TCTL formula and to verify the correctness of these models with respect to this property. For the runtime phase, we build a monitor to check whether the assumptions made at design time are also correct at run time. If the current system observations of the environment do not correspond to the initial system assumptions, the monitor sends feedback to the system and the system enters a passive safe state.

eLCOSH : Electronic Library of Construction Occupational Safety and Health

Science.gov (United States)

Occupational Safety & Health Administration (OSHA) about Preventing Hearing Loss Caused by Chemical 2006 that drew attention to the safety of miners, hazard detecti... OSHA Safety and Health Information , 199... CDC study of occupational respiratory health analyzes rates of worker deaths from asthma by

Safety Systems

Science.gov (United States)

Halligan, Tom

2009-01-01

Colleges across the country are rising to the task by implementing safety programs, response strategies, and technologies intended to create a secure environment for teachers and students. Whether it is preparing and responding to a natural disaster, health emergency, or act of violence, more schools are making campus safety a top priority. At…

Workplace Safety and Health Topics: Industries and Occupations

Science.gov (United States)

... Submit Search The CDC The National Institute for Occupational Safety and Health (NIOSH) Note: Javascript is disabled or is not ... September 6, 2017 Content source: National Institute for Occupational Safety and Health Education and Information Division Email Recommend Tweet YouTube ...

77 FR 39743 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

Science.gov (United States)

2012-07-05

... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0022] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Occupational Safety and Health (FACOSH). SUMMARY: The Assistant Secretary of Labor for Occupational Safety and...

76 FR 39902 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

Science.gov (United States)

2011-07-07

... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0116] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Occupational Safety and Health (FACOSH). SUMMARY: The Assistant Secretary of Labor for Occupational Safety and...

Exploring the Influence of Nurse Work Environment and Patient Safety Culture on Attitudes Toward Incident Reporting.

Science.gov (United States)

Yoo, Moon Sook; Kim, Kyoung Ja

2017-09-01

The aim of this study was to explore the influence of nurse work environments and patient safety culture on attitudes toward incident reporting. Patient safety culture had been known as a factor of incident reporting by nurses. Positive work environment could be an important influencing factor for the safety behavior of nurses. A cross-sectional survey design was used. The structured questionnaire was administered to 191 nurses working at a tertiary university hospital in South Korea. Nurses' perception of work environment and patient safety culture were positively correlated with attitudes toward incident reporting. A regression model with clinical career, work area and nurse work environment, and patient safety culture against attitudes toward incident reporting was statistically significant. The model explained approximately 50.7% of attitudes toward incident reporting. Improving nurses' attitudes toward incident reporting can be achieved with a broad approach that includes improvements in work environment and patient safety culture.

Exploration and production environment. Preserving the future our responsibility

International Nuclear Information System (INIS)

2004-01-01

This document presents the Total Group commitments to manage natural resources in a rational way, to preserve biodiversity for future generations and protect the environment. It contains the health, safety, environment and quality charter of Total, the 12 exploration and production health, safety and environment rules and the exploration and production environmental policy. (A.L.B.)

Health and safety in the nuclear age

International Nuclear Information System (INIS)

1988-01-01

In their Communication to the Council on the development of Community measures for the application of Chapter III of the Euratom Treaty - Health and safety (COM(86) 434 final) the Commission of the European Communities announced their intention to initiate a 'Standing Conference on Health and Safety in the Nuclear Age' in order to contribute to an increase of information on nuclear activities. Following this proposition, the Commission (Directorate-General for Employment, Social Affairs and Education, Health and Safety Directorate) organized the first meeting of this Standing Conference in Luxembourg on 5, 6 and 7 October 1987 with the theme 'Information for the public and the media on health protection and safety with regard to nuclear activities'. About 120 participants representing scientific experts, the media, the bodies concerned with environmental or consumer protection, the social partners and interested national and international organizations, took part in this conference. It was the first time at European Community level that a meeting allowed an exchange of positions on the health problems related to ionizing radiation by all the parties interested in this subject. The Commission was asked to pursue this dialogue in order to improve the perception of citizens of the Community of the potential risks and the methods of protection brought into force in the nuclear field

A historical and socioeconomic analysis of occupational safety and health in India.

Science.gov (United States)

Vilanilam, J V

1980-01-01

Workers in poor countries of the so-called Third World are more likely to be affected by the dangers of high technology than their counterparts in wealthier countries. Owing to their lack of education, most workers in the "developing" world are unaware of the hazards of their occupations. Moreover, their general backwardness in sanitation and nutrition and climatic proneness of their geographic region to epidemics cause diseases contracted from the work environment to be aggravated. occupational diseases are often misconstrued as diseases resulting from the general environment. Since unemployment in underdeveloped countries is of a very high order, workers are prepared to accept any job, irrespective of the dangers involved. Labor is cheap and easily replaceable, so employers see no need for improving occupational safety and health. Labor unions are mostly controlled by full-time politicians who consider health a political issue, especially when their party controls the country's government. The seriousness of all these factors is heightened by the existing socioeconomic order in poor countries, in which national medievalism and multinational modernism play a crucial role. In order to understand the prevailing socioeconomic order, one has to analyze the social structures of poor countries in the context of today's world economic structure. India is taken as an example of a "developing" country where all the above-mentioned factors and many others are in operation: backwardness of the worker; poor nutrition; lack of concern for public health; proneness to epidemics; and indifference on the part of employers, politicians, and unions toward occupational health; high unemployment, control of the local economy by multinational corporations; and control of the mass media by feudalistic vested interests. This article attempts to analyze the occupational health and safety issue in India from a historical perspective, and stresses the vital need of structural changes in

Environment, safety, health at DOE Facilities. Annual report, Fiscal Year 1980

International Nuclear Information System (INIS)

1981-07-01

The Department of Energy's occupational safety and property protection performance in fiscal year 1980 was excellent in all reported categories with loss rates generally less than one-third of comparable industry figures. The Department of Energy's fiscal year 1980 incidence rate per 200,000 work hours was 1.1 lost workday cases and 18.2 lost workdays compared to 1.1 lost workday cases and 17.2 lost workdays during fiscal year 1979. The recorded occupational illness rate, based on only 70 cases, was 0.05 cases per 200,000 work hours compared to 0.06 cases per 200,000 work hours for fiscal year 1979. Ten fatalities involving Federal or contractor employees occurred in fiscal year 1980 compared to nine for fiscal year 1979. Four of those in fiscal year 1980 resulted from two aircraft accidents. Total reported property loss during fiscal year 1980 was $7.1 million with $3.5 million attributable to earthquake damage sustained by the Lawrence Livermore and Sandia National Laboratories on January 24, 1980. A total of 131 million vehicle miles of official vehicular travel during fiscal year 1980 resulted in 768 accidents and $535,145 in property damages. The 104,986 monitored Department of Energy and Department of Energy contractor employees received a total dose of 9040 REM in calendar year 1979. Both the total dose and the 1748 employees receiving radiation exposures greater than 1 REM in 1979 represent a continuing downward trend from the calendar year 1978 total dose of 9380 REM and the 1826 employees who received radiation exposures greater than 1 REM. The fifty-nine appraisals conducted indicate that generally adequate plans have been developed and effective organizational structures have been established to carry out the Department of Energy's Environmental Protection, Safety, and Health Protection (ES and H) Program

77 FR 22358 - Occupational Safety and Health Administration

Science.gov (United States)

2012-04-13

... DEPARTMENT OF LABOR Occupational Safety and Health Administration Preparations for the 23rd Session of the UN Sub-Committee of Experts on the Globally Harmonized System of Classification and...: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Notice of public meeting. SUMMARY: OSHA...

75 FR 13783 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

Science.gov (United States)

2010-03-23

... DEPARTMENT OF LABOR Occupational Safety and Health Administration Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and Health Administration (OSHA), Labor... Health (MACOSH) was established under Section 7 of the Occupational Safety and Health (OSH) Act of 1970...

Directory of Academic Programs in Occupational Safety and Health.

Science.gov (United States)

Weis, William J., III; And Others

This booklet describes academic program offerings in American colleges and universities in the area of occupational safety and health. Programs are divided into five major categories, corresponding to each of the core disciplines: (1) occupational safety and health/industrial hygiene, (2) occupational safety, (3) industrial hygiene, (4)…

WNA's worldwide overview on front-end nuclear fuel cycle growth and health, safety and environmental issues.

Science.gov (United States)

Saint-Pierre, Sylvain; Kidd, Steve

2011-01-01

This paper presents the WNA's worldwide nuclear industry overview on the anticipated growth of the front-end nuclear fuel cycle from uranium mining to conversion and enrichment, and on the related key health, safety, and environmental (HSE) issues and challenges. It also puts an emphasis on uranium mining in new producing countries with insufficiently developed regulatory regimes that pose greater HSE concerns. It introduces the new WNA policy on uranium mining: Sustaining Global Best Practices in Uranium Mining and Processing-Principles for Managing Radiation, Health and Safety and the Environment, which is an outgrowth of an International Atomic Energy Agency (IAEA) cooperation project that closely involved industry and governmental experts in uranium mining from around the world. Copyright © 2010 Health Physics Society

Health and safety plan for operations performed for the Environmental Restoration Program

Energy Technology Data Exchange (ETDEWEB)

Trippet, W.A. II (IT Corp., (United States)); Reneau, M.; Morton, S.L. (EG and G Idaho, Inc., Idaho Falls, ID (United States))

1992-04-01

This document constitutes the generic health and safety plan for the Environmental Restoration Program (ERP). It addresses the health and safety requirements of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA); Occupational Safety and Health Administration (OSHA) 29 CFR 1910.120 standard; and EG G Idaho, Inc. This plan is a guide to individuals who must complete a health and safety plan for a task performed for the EPR. It contains a task specific addendum that, when completed, specifically addresses task specific health and safety issues. This health and safety plan reduces the time it takes to write a task specific health and safety plan by providing discussions of requirements, guidance on where specific information is located, and specific topics in the Addendum that must be discussed at a task level. This format encourages a complete task specific health and safety plan and a standard for all health and safety plans written for ERP.

Health and safety plan for operations performed for the Environmental Restoration Program