Contamination monitoring activities in Kanupp

Energy Technology Data Exchange (ETDEWEB)

Naqvi, S S [Karachi Nuclear Power Plant (Pakistan)

1997-06-01

The Karachi Nuclear Power Plant (Kanupp) is a 137 MWe pressurized heavy water reactor, designed and erected by the Canadian General Electric Company as a turn key project. The plant is in operation since it was commissioned in the year 1972. It is located at the Arabian Sea Coast about 15 miles to the west of Karachi. During its more than two decades of operation, the plant has generated about 8 billion units of electricity with an average life time availability factor of 60%. In Kanupp, radioactive contamination may exit due to the release of fission product, activation products etc., which may somehow escape from its confinement and may contaminate surface or other media such as air, water etc. In this paper, following items are described: main aspects of contamination, status of contamination monitoring, need of contamination monitoring, radiation protection activity, instruments, contamination, current status of contamination survey materials and their disposal, and environmental monitoring. (G.K.)

Automatic personnel contamination monitor

International Nuclear Information System (INIS)

Lattin, Kenneth R.

1978-01-01

United Nuclear Industries, Inc. (UNI) has developed an automatic personnel contamination monitor (APCM), which uniquely combines the design features of both portal and hand and shoe monitors. In addition, this prototype system also has a number of new features, including: micro computer control and readout, nineteen large area gas flow detectors, real-time background compensation, self-checking for system failures, and card reader identification and control. UNI's experience in operating the Hanford N Reactor, located in Richland, Washington, has shown the necessity of automatically monitoring plant personnel for contamination after they have passed through the procedurally controlled radiation zones. This final check ensures that each radiation zone worker has been properly checked before leaving company controlled boundaries. Investigation of the commercially available portal and hand and shoe monitors indicated that they did not have the sensitivity or sophistication required for UNI's application, therefore, a development program was initiated, resulting in the subject monitor. Field testing shows good sensitivity to personnel contamination with the majority of alarms showing contaminants on clothing, face and head areas. In general, the APCM has sensitivity comparable to portal survey instrumentation. The inherit stand-in, walk-on feature of the APCM not only makes it easy to use, but makes it difficult to bypass. (author)

Radiological surveillance of airborne contaminants in the working environment

International Nuclear Information System (INIS)

1979-01-01

Contamination of the air of the working environment may result from incidental or accidental releases during the handling of radioactive materials. Representative sampling and measurement are complicated by a variety of factors, arising mainly from the physical and chemical properties of radioactive aerosols. The following topics are presented in detail: sources and types of airborne contaminants, sampling techniques and instruments, measurement techniques and instruments, interpretation of measurements, examples of air monitoring programmes

Country report on contamination monitoring

Energy Technology Data Exchange (ETDEWEB)

Oyuntulkhuur, Navaangalsan [National Centre for Hygiene, Epidemiology and Microbiology (Mongolia). Central Radiological Laboratory

1997-06-01

Mongolia is a non-nuclear country and has currently neither nuclear power plants nor research reactors. This country joined the Regional Co-operation Agreement (RCA) for the Asia Pacific region for research, development and training related to nuclear science and technology in 1993. Various measures has been taken for strengthening of radiation protection, cooperated with several international organizations mainly with IAEA. In Mongolia radioactive substances and sources are used for the following purposes: for research work; medical radiotherapy and diagnostic radiology in hospitals; industrial enterprises for technological processes; and for non-destructive testing in industry. Radiation safety inspection is conducted by the CRL. The inspections consist of verification of compliance with radiation safety requirements and with any additional requirements specified in the authorization of accounting records and a physical check on the presence of radiation sources; check on the work carried out by the radiation safety services to monitor radioactive contamination of the environment; and measurements and sampling. CRL should take much attention for improvement and development of the activities in the field of surface contamination monitoring concerning a wide use of radionuclides in different field of economy. (G.K.)

Mussels as bioindicators of diclofenac contamination in coastal environments.

Science.gov (United States)

Cunha, S C; Pena, A; Fernandes, J O

2017-06-01

Diclofenac a nonsteroidal anti-inflammatory drug (NSAID) has been confirmed as an emerging contaminant in the aquatic environment. Toxicology studies have revealed that harmful effects may emerge from diclofenac presence not only for human health, but also for marine organisms, which implies its monitoring. To overcome the demanding challenges of diclofenac quantification in biotic aquatic species, a novel method for the determination of diclofenac in mussels (Mytilus galloprovincialis and Mytilus edulis) and macroalgae (Laminaria digitata) using high performance liquid chromatography coupled to tandem mass spectrometry was developed and validated according to the EC Decision 2002/657/EC. Additionally, a study was done about diclofenac contamination in mussels collected from 8 sites along the 1115 miles of coastline in Portugal in 2015. The results suggested that levels in mussels are closely related to the environmental contamination. Therefore, mussels can be a potential bioindicator of diclofenac contamination in the coastal environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Biochemical markers for the assessment of aquatic environment contamination

Science.gov (United States)

Havelková, Marcela; Randák, Tomáš; Blahová, Jana; Slatinská, Iveta; Svobodová, Zdeňka

2008-01-01

The need for assessment of aquatic ecosystem contamination and of its impact on water dwelling organisms was developed in response to rising aquatic environmental pollution. In this field study, liver enzymes of phase I and phase II of xenobiotic transformation, namely cytochrome P450, ethoxyresorufin-O-deethylase, glutathione-S-transferase and tripeptide glutathione were used to assess the contamination of the aquatic environment at different rivers in the Czech Republic. The indicator species selected was the male chub (Leuciscus cephalus L.) and male brown trout (Salmo trutta fario). Chemical analyses included also the assessment of the most important inductors of previously mentioned biochemical markers. The major inductors of monitored biomarkers are industrial contaminants which belong to a large group of organic pollutants (PCB, PAH, PCDD/F, DDT, HCH, HCB and OCS), persistent in the environment. Four different groups of river basins were assessed: the River Tichá Orlice and its tributary the Kralický brook; important tributaries of the River Elbe (the rivers Orlice, Chrudimka, Cidlina, Jizera, Vltava, Ohře and Bílina); major rivers in the Czech Republic (the rivers Lužnice, Otava, Sázava, Berounka, Vltava, Labe, Ohře, Svratka, Dyje, Morava and Odra) and the River Vltava. The use of the biochemical markers together with chemical analyses seems to be an effective way to monitor the quality of aquatic environment. PMID:21218108

Monitoring of Water and Contaminant Migration at the Groundwater-Surface Water Interface

Science.gov (United States)

2008-08-01

seepage is occurring in a freshwater lake environment and to map the lateral extent of any subsurface contamination at the groundwater –surface water ...and Contaminant Migration at the Groundwater -Surface Water Interface August 2008 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public...4. TITLE AND SUBTITLE Monitoring of Water and Contaminant Migration at the Groundwater -Surface Water Interface 5a. CONTRACT NUMBER 5b. GRANT NUMBER

Evaluation of indigenously developed plastic scintillator sheet detector for surface radioactive contamination monitoring application

International Nuclear Information System (INIS)

Sahani, R.M.; Chaudhary, H.S.; Mahala, V.K.; Senwar, K.R.; Meena, J.P.

2018-01-01

Radioactive contamination may be caused by release of radioactivity in the environment due to accident at nuclear plant/reactor or spillage of loose radioactive materials in a laboratory. The protection of workers from potentially hazardous radiations emitted by the contaminants is a matter of prime concern. The detection of such radiations requires a monitoring system capable of measuring the level of radioactivity at the contaminated site. Plastic scintillators are widely used for large area radiation monitoring due to the ease of preparation in different shape and sizes. These detectors are sensitive to beta and gamma radiation therefore can be used for monitoring of beta and gamma contamination. In this paper, performance results of indigenously developed plastic scintillator sheet of area 800 cm 2 are reported

Monitoring of contamination of atmospheric environment by radiation

International Nuclear Information System (INIS)

Ise, Hiroaki

1995-01-01

Atmospheric pollution has become a worldwide problem regardless of developed industrial nations and developing countries. In particular, the pollution due to automobile exhaust gas, the carcinogenic particles in diesel exhaust and their relation to various respiratory diseases are the problems. Nitrogen oxides and sulfur oxides in exhaust gas become the cause of acid rain. Radiation began to be utilized for the measurement of the concentration of floating particles and the amount of fallout dust, the forecast of the generation and diffusion of pollutants, the elucidation of the contribution of generation sources in wide areas and so on. In this report, the circumstances that radiation became to be utilized for monitoring atmospheric environment and the present status and the perspective of the radiation utilization in the field of the preservation of atmospheric environment are described. The progress of the method of measuring floating particles in Japan is explained. The automatic measurement of floating particles by β-ray absorption method and the application of β-ray absorption method to the measurement of the amount of fallout dust, generation source particles and the exposure to floating particles of individuals for health control are described. The utilization of radiation for real time monitoring, the investigation of the generation of blown-up dust, atmospheric diffusion experiment and the elucidation of the contribution of generation sources by PIXE radioactivation analysis are reported. (K.I.)

Unregulated Contaminant Monitoring Program Data

Data.gov (United States)

U.S. Environmental Protection Agency — EPA uses the Unregulated Contaminant Monitoring (UCM) program to collect data for contaminants suspected to be present in drinking water, but that do not have...

Development of remote operated floor contamination monitor

International Nuclear Information System (INIS)

Sreekumar, K.; Gangamohan, M.; Kannan, R.K.; Rajan, S.

2005-01-01

Contamination check of floors and walkways in and around Reactor building areas forms an integral part of Radiation Protection Program in Power Stations. Though random swipe check method is adopted for the detection of loose contamination, this method has the disadvantage of leaving the fixed contamination and hotspots undetected. Hence, scanning the area with a sensitive detector, held close to the surface provides positive means for the detection of contamination. Checking large areas and walkways by holding the detector close to the surface involves physical work. Also, areas which are unapproachable due to congestion of equipment, may go uncovered by contamination monitoring in order to eliminate the physical strain involved in such contamination monitoring and to cover unapproachable areas, a small size prototype device that can be operated remotely was fabricated. This device detects contamination instantaneously and accurately. This paper describes design and fabrication of the device used for floor contamination monitoring. (author)

Evaluation of Using Caged Clams to Monitor Contaminated Groundwater Exposure in the Near-Shore Environment of the Hanford Site 300 Area

Energy Technology Data Exchange (ETDEWEB)

Larson, Kyle B.; Poston, Ted M.; Tiller, Brett L.

2008-01-31

The Asiatic clam (Corbicula fluminea) has been identified as an indicator species for locating and monitoring contaminated groundwater in the Columbia River. Pacific Northwest National Laboratory conducted a field study to explore the use of caged Asiatic clams to monitor contaminated groundwater upwelling in the 300 Area near-shore environment and assess seasonal differences in uranium uptake in relation to seasonal flow regimes of the Columbia River. Additional objectives included examining the potential effects of uranium accumulation on growth, survival, and tissue condition of the clams. This report documents the field conditions and procedures, laboratory procedures, and statistical analyses used in collecting samples and processing the data. Detailed results are presented and illustrated, followed by a discussion comparing uranium concentrations in Asiatic clams collected at the 300 Area and describing the relationship between river discharge, groundwater indicators, and uranium in clams. Growth and survival, histology, and other sources of environmental variation also are discussed.

Process monitoring in high volume semiconductor production environment with in-fab TXRF

International Nuclear Information System (INIS)

Ghatak-Roy, A.R.; Hossain, T.Z.

2000-01-01

After its introduction in the 80's, TXRF has become an important tool for surface contamination analysis. This is particularly true for the semiconductor industries, where monitoring trace level contamination in ultra clean environment is absolutely necessary for successful device production with reasonable yield. In FAB 25 of the Advanced Micro Devices in Austin, we have installed two TXRF tools, which are model TXRF3750 manufactured by Rigaku. They contain rotating tungsten anodes with three beam capability for wide selection of elements. One of the beams (WM) is used for monitoring of low Z elements such as Na, Mg and Al. The standard output is 9 kW with 300 mA at 30 kV. The tool runs 24 hours a day, 7 days a week, except for maintenance and breakdowns. We have been using TXRF for in-fab monitoring of various tools and processes for trace contamination and some quantification of materials. This in-fab operation is important because it gives real time monitoring without the necessity of bringing the wafers out of the fab. Secondly, being in ultra clean fab environment, the risk of background contamination is minimized. Since TXRF measurement is fast and does not need any sample preparation, this works very well as production support tool. Several wafer fab technicians have been trained to use the tool for round the clock operation. We have successfully monitored tools and processes in our fab. One example is the monitoring of numerous sinks used in the cleaning of production wafers after various processes. Monitor wafers are run after sink cleaning and solvent changes and they are then analyzed for any contamination. Another example is the monitoring of tools that use Ferrofluidic seals so as to prevent any contamination from Fe and Cr. Other tools using TXRF include diffusion furnaces, etchers and plasma cleaning tools. We have also been monitoring processes such as ion implantation, metal deposition and rapid thermal annealing. In this presentation, we will

Soil monitoring as a part of environment monitoring in Slovakia

International Nuclear Information System (INIS)

Kobza, J.

1997-01-01

In frame of Soil monitoring system it is going about a lot of methods in advance as follows: methods of soil monitoring sites selection and soil monitoring network construction, as well; methods of soil survey and soil sampling; analytical methods (indicating of chemical, agrochemical and physical properties); soil database and methods of evaluation and interpretation of measured results. The monitoring network was constructed on the base of ecological principles - including the monitoring of all soil types and subtypes, various climatic and emission regions as well as relatively clean regions, lowland and highland. Soil monitoring network in forest land is regular (8 x 8 km) with regard to International monitoring system in Forestry. The soil monitoring network in Slovakia consist of 650 monitoring sites (312 sites in farming land and 338 sites in forest land). In addition soil monitoring network includes also 21 monitoring sites. All monitoring sites are geodesically located and reported on the map at a scale of 1:5000. There are the methods concerning the important soil parameters indication with regard to main soil degradation processes a s follows: soil contamination (heavy metals and organic contaminants); soil acidification; soil salinity; soil erosion (deluometrically by the Cs-137 and remote sensing methods); soil compaction; soil fertility and protection. Analytical control system was elaborated according to Good Laboratory Practice. Evaluation of soil monitoring network results is not simple because it depends on various monitored parameters, on aim of evaluation as well as on the scale of landscape which is object for evaluation. There are used the modern statistical methods in monitoring system which can be: universal; disjunctive; simulated. Used statistical methods are significant for interpretation of measured results as follows: trends in landscape; anisotropy; comparison. The evaluation and interpretation way is very significant with regard not

Radioactive standards and calibration methods for contamination monitoring instruments

Energy Technology Data Exchange (ETDEWEB)

Yoshida, Makoto [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1997-06-01

Contamination monitoring in the facilities for handling unsealed radioactive materials is one of the most important procedures for radiation protection as well as radiation dose monitoring. For implementation of the proper contamination monitoring, radiation measuring instruments should not only be suitable to the purpose of monitoring, but also be well calibrated for the objective qualities of measurement. In the calibration of contamination monitoring instruments, quality reference activities need to be used. They are supplied in different such as extended sources, radioactive solutions or radioactive gases. These reference activities must be traceable to the national standards or equivalent standards. On the other hand, the appropriate calibration methods must be applied for each type of contamination monitoring instruments. In this paper, the concepts of calibration for contamination monitoring instruments, reference sources, determination methods of reference quantities and practical calibration methods of contamination monitoring instruments, including the procedures carried out in Japan Atomic Energy Research Institute and some relevant experimental data. (G.K.)

Status of contamination monitoring in Bangladesh

Energy Technology Data Exchange (ETDEWEB)

Begum, Aleya [Institute of Nuclear Science and Technology, Savar, Dacca (Bangladesh)

1997-06-01

The applications of radioisotopes and radiation sources to the research and development in medicine, food agriculture, industries and others are rapidly increasing in Bangladesh. The existing major nuclear facilites and allied laboratories of the country include 3 MW TRIGA Mark-2 research reactor for training, research and radioisotope production, 14 MeV neutron generator for nuclear data measurement and elemental analysis via neutron activation, 3 MeV Van de Graaff accelerator for the research and application of nuclear physics, and 50,000 Ci and 5,000 Ci Co-60 irradiators. About 10 Co-60 and Cs-137 teletherapy units are in operation in hospitals. The radioactive contamination of working areas, equipment, protective clothing and skin may result from normal operation and accidents, and contamination monitoring and decontamination are the essential part of radiation protection program. Surface contamination is monitored with Berthold survey meters. Hand and foot monitors have been used. Routine systematic search, continuous air monitoring, the examination of silt movement in Chittagong harbor using Sc-46 tracer and the measurement of tritium contamination for the neutron generator are reported. (K.I.)

Certified reference materials for organic contaminants for use in monitoring of the aquatic environment

NARCIS (Netherlands)

Boer, de J.; McGovern, E.

2001-01-01

Over the last three decades organic contaminants have been of increasing importance in environmental monitoring. Dioxins, furans, polychlorinated biphenyls and organochlorine pesticides have determined the environmental research agenda. This has led to an increasing demand for certified reference

Monitoring airborne biotic contaminants in the indoor environment of pig and poultry confinement buildings.

Science.gov (United States)

Hong, Pei-Ying; Li, Xiangzhen; Yang, Xufei; Shinkai, Takumi; Zhang, Yuanhui; Wang, Xinlei; Mackie, Roderick I

2012-06-01

Given the growing concerns over human and animal health issues related to confined animal feeding operations, an in-depth examination is required to monitor for airborne bacteria and associated antibiotic resistance genes. Our 16S rRNA-based pyrosequencing revealed that the airborne microbial community skewed towards a higher abundance of Firmicutes (> 59.2%) and Bacteroidetes (4.2-31.4%) within the confinement buildings, while the office environment was predominated by Proteobacteria (55.2%). Furthermore, bioaerosols in the confinement buildings were sporadically associated with genera of potential pathogens, and these genera were more frequently observed in the bioaerosols of pig and layer hen confinement than the turkey confinement buildings and office environment. High abundances of tetracycline resistance genes (9.55 × 10(2) to 1.69 × 10(6) copies ng(-1) DNA) were also detected in the bioaerosols sampled from confinement buildings. Bacterial lineages present in the poultry bioaerosols clustered apart from those present in the pig bioaerosols and among the different phases of pig production, suggesting that different livestock as well as production phase were associated with a distinct airborne microbial community. By understanding the diversity of biotic contaminants associated with the different confinement buildings, this study facilitates the implementation of better management strategies to minimize potential health impacts on both livestock and humans working in this environment. © 2012 Society for Applied Microbiology and Blackwell Publishing Ltd.

Monitoring of overalls and personnel skin contamination

International Nuclear Information System (INIS)

Turkin, N.F.

1980-01-01

Organization of monitoring of overalls and personnel skin contamination wastes is considered. The devices used for this purpose are enumerated. In sanitary sluices through which the personnel leaving the repair zone it is recommended to particularly thoroughly control hand skin contamination and most contaminated parts of overalls (sleeves, breeches lower parts, pockets, stomack region). In sanitary check points during personnel leaving the operator zone monitoring of overalls and skin contamination is performed. The overalls and other individual protective clothing are subjected to control in a special loundry before and after washing (decontamination) [ru

Automated contamination monitoring for hot particles

International Nuclear Information System (INIS)

Johnstone, G.; Case, L.

1987-01-01

INS Corp., the largest nuclear laundry company in the United States, has recently developed two types of automated contamination monitoring systems: 1) the Automated Laundry Monitor (ALM), which provides quality assurance monitoring for protective clothing contamination and 2) a low-level automated monitoring system for Plastic Volume Reduction Service (PVRS). The presentation details the inaccuracies associated with hand-probe frisking which led to the development of the ALM. The ALM was designed for 100% quality assurance monitoring of garments to the most stringent customer requirements. A review of why the ALM is essential in verifying the absence of hot particles on garments is given. The final topic addresses the expansion of the ALM technology in support of the INS Plastic Volume Reduction Service by monitoring decontaminated plastics to free release levels. This presentation reviews the design and operation of both monitoring systems

The design of hands and feet contamination monitor

International Nuclear Information System (INIS)

Song Jiangxue; Shen Yang; Deng Changming; Zhang Jia; Hou Lei; Meng Dan

2011-01-01

In order to protect the hands and feet of personnel engaged in nuclear, draw on advanced hands and feet contamination monitor, we design a new radiation protection instrumentation. It describes the composition of the hands and feet contamination monitor, and software program design. It describes the hardware monitor software, firmware and computer programming techniques. If device found your hand and foot surface is contamination, it will prompt you to decontamination, to protect your hands and feet of safety. (authors)

Monitoring psychrotrophic lactic acid bacteria contamination in a ready-to-eat vegetable salad production environment.

Science.gov (United States)

Pothakos, Vasileios; Snauwaert, Cindy; De Vos, Paul; Huys, Geert; Devlieghere, Frank

2014-08-18

A study monitoring lactic acid bacteria contamination was conducted in a company producing fresh, minimally processed, packaged and ready-to-eat (RTE) vegetable salads (stored at 4°C) in order to investigate the reason for high psychrotrophic LAB levels in the products at the end of shelf-life. Initially, high microbial counts exceeding the established psychrotrophic thresholds (>10(7)-10(8)CFU/g) and spoilage manifestations before the end of the shelf-life (7days) occurred in products containing an assortment of sliced and diced vegetables, but within a one year period these spoilage defects became prevalent in the entire processing plant. Environmental sampling and microbiological analyses of the raw materials and final products throughout the manufacturing process highlighted the presence of high numbers of Leuconostoc spp. in halved and unseeded, fresh sweet bell peppers provided by the supplier. A combination of two DNA fingerprinting techniques facilitated the assessment of the species diversity of LAB present in the processing environment along with the critical point of their introduction in the production facility. Probably through air mediation and surface adhesion, mainly members of the strictly psychrotrophic species Leuconostoc gelidum subsp. gasicomitatum and L. gelidum subsp. gelidum were responsible for the cross-contamination of every vegetable handled within the plant. Copyright © 2014 Elsevier B.V. All rights reserved.

Radioactive contamination in monitors received for calibration

International Nuclear Information System (INIS)

Dias, Paulo S.; Santos, Gilvan C. dos; Brunelo, Maria Antonieta G.; Paula, Tiago C. de; Pires, Marina A.; Borges, Jose C.

2013-01-01

The Calibration Laboratory - LABCAL, from the Research Center for Metrology and Testing - METROBRAS, MRA Comercio de Instrumentos Eletronicos Ltda., began activities in October 2008 and, in August 2009, decided to establish a procedure for monitoring tests, external and internal, of all packages received from customers, containing instruments for calibration. The aim was to investigate possible contamination radioactive on these instruments. On July 2011, this procedure was extended to packagings of personal thermoluminescent dosemeters - TLD, received by the newly created Laboratory Laboratorio de Dosimetria Pessoal - LDP . In the monitoring procedure were used monitors with external probe, type pancake, MRA brand, models GP - 500 and MIR 7028. During the 37 months in which this investigation was conducted, were detected 42 cases of radioactive contamination, with the following characteristics: 1) just one case was personal dosimeter, TLD type; 2) just one case was not from a packing from nuclear medicine service - was from a mining company; 3) contamination occurred on packs and instruments, located and/or widespread; 4) contamination values ranged from slightly above the level of background radiation to about a thousand fold. Although METROBRAS has facilities for decontamination, in most cases, especially those of higher contamination, the procedure followed was to store the contaminated material in a room used for storage of radioactive sources. Periodically, each package and/or instrument was monitored, being released when the radiation level matched the background radiation. Every contamination detected, the client and/or owner of the instrument was informed. The Brazilian National Energy Commission - CNEN, was informed, during your public consultation for reviewing the standard for nuclear medicine services, held in mid-2012, having received from METROBRAS the statistical data available at the time. The high frequency of contamination detected and the high

Harnessing monitoring measurements in urban environments for decision making after nuclear accidents

International Nuclear Information System (INIS)

Kaiser, J.C.; Proehl, G.

2007-01-01

This article gives an overview on the conceptual design of the Inhabited Areas Monitoring Module IA MM which will be introduced into European decision support systems for nuclear emergencies. It will improve the use of monitoring data of radioactive contamination in urban environments for decision making. IAMM converts the dated gamma dose rate (GDR) measurements from geo-referenced locations into maps of surface contamination with an enhanced spatial resolution. Depending on the availability of the monitoring data, IAMM relies on two modes of operation. If there are only a few measurements, these are taken to improve the maps from a deposition model using data assimilation. If the number of measurements is sufficient to apply spatial interpolation IAMM will rely entirely on monitoring data. Suitable geo-referenced data points will be interpreted by IAMM with respect to their detector environment using the concept of location factors. The endpoints of IAMM can be used directly for decision making or dose calculations with either simple dose models or the more refined EuRopean Model for INhabited areas (ERMIN). (orig.)

Monitoring of atmospheric contamination by plutonium in laboratories

International Nuclear Information System (INIS)

Pomarola, J.; Risselin, A.; Feliers, P.

1965-02-01

Immediate detection of atmospheric contamination by plutonium is necessary for warning of operators. A precise estimate of the level of this contamination is also necessary in order to give the Medical Section proper information. Experiments have been carried out at CEN-FAR using atmospheric contamination by plutonium monitors. This paper deals successively with: important problems of monitoring, the carrying out of the experiments and the results yielded. (authors) [fr

A new risk and stochastic analysis of monitoring and remediation in subsurface contamination

Science.gov (United States)

Papapetridis, K.; Paleologos, E.

2012-04-01

Sanitary landfills constitute the most widely used management approach for the disposal of solid wastes because of their simplicity and cost effectiveness. However, historical records indicate that landfills exhibit a high failure rate of groundwater contamination. Successful detection of aquifer contamination via monitoring wells is a complicated problem with many factors, such as the heterogeneity of the geologic environment, the dispersion of contamination into the geologic medium, the quantity and nature of the contaminants, the number and location of the monitoring wells, and the frequency of sampling, all contributing to the uncertainty of early detection. Detection of contaminants, of course, is of value if remedial actions follow as soon as possible, so that the volume of contaminated groundwater to be treated is minimized. Practically, there is always a time lag between contaminant detection and remedial action response. Administrative decisions and arrangements with local contractors initiate remedial procedures introduces a time lag between detection and remediation time. During this time lag a plume continues to move into an aquifer contaminating larger groundwater volumes. In the present study these issues are addressed by investigating the case of instantaneous leakage from a landfill facility into a heterogeneous aquifer. The stochastic Monte Carlo framework was used to address, in two dimensions, the problem of evaluating the effectiveness of contaminant detection in heterogeneous aquifers by linear networks of monitoring wells. Numerical experiments based on the random-walk tracking-particle method were conducted to determine the detection probabilities and to calculate contaminated areas at different time steps. Several cases were studied assuming different levels of geologic heterogeneity, contamination dispersion, detectable contamination limits and monitoring wells' sampling frequencies. A new perspective is introduced for the correction of

Understanding Fluid and Contaminant Movement in the Unsaturated Zone Using the INEEL Vadose Zone Monitoring System

International Nuclear Information System (INIS)

Hubbell, J. M.; Mattson, E. D.; Sisson, J. B.; Magnuson, S. O.

2002-01-01

DOE has hundreds of contaminated facilities and waste sites requiring cleanup and/or long-term monitoring. These contaminated sites reside in unsaturated soils (i.e. the vadose zone) above the water table. Some of these sites will require active remediation activities or removal while other sites will be placed under institutional controls. In either case, evaluating the effectiveness of the remediation strategy or institutional controls will require monitoring. Classical monitoring strategies implemented at RCRA/CERCLA sites require ground water sampling for 30 years following closure. The overall effectiveness of ground water sampling is diminished due to the fact that by the time you detect chemical transport from a waste site, a major contamination plume likely exists in the vadose zone and the aquifer. This paper suggests a more effective monitoring strategy through monitoring near the contaminant sites within the vadose zone. Vadose zone monitoring allows for quicker detection of potential contaminant transport. The INEEL Vadose Zone Monitoring System (VZMS) is becoming an accepted, cost effective monitoring technology for assessing contaminant transport at DOE facilities. This paper describes the technologies employed in the VZMS and describes how it was used at several DOE facilities. The INEEL VZMS has provided the information in developing and validating both conceptual and risk assessment models of contaminant transport at the Idaho National Engineering and Environmental Laboratory (INEEL), Oak Ridge National Laboratory (ORNL), Savannah River Site (SRS) and the Hanford site. These DOE sites exhibit a broad range of meteorologic, hydrologic and geologic conditions representative of various common geologic environments. The VZMS is comprised of advanced tensiometers, water content sensors, temperature sensors and soil and gas samplers. These instruments are placed at multiple depths in boreholes and allows for the detection of water movement in the

Radiation Protection of the Public and the Environment. Overcoming Environmental Monitoring Inertia

International Nuclear Information System (INIS)

Parker, T.G.; Desmond, J.A.; Stevens, A.K.

2006-01-01

The first nuclear reactors at Sellafield went critical in 1951 and fuel reprocessing commenced shortly afterwards. As the nuclear programme expanded, reprocessing increased and there was an associated increase in discharges to the environment. An initial environmental monitoring programme was formulated on the basis of research and assessment of the likely behaviour of radionuclides. In addition to the routine process sources there were also incidents that gave rise to acute releases of radioactivity to the environment. Of key significance were: the Windscale fire, 1957; short-cooled fuel reprocessing, 1981; and discharge of contaminated solvent, 1983. All of these incidents added to the requirements for environments for environmental monitoring. The monitoring programme has evolved over a period of more than 50 years. (N.C.)

Radiation Protection of the Public and the Environment. Overcoming Environmental Monitoring Inertia

Energy Technology Data Exchange (ETDEWEB)

Parker, T.G.; Desmond, J.A. [British Nuclear Group Sellafield Ltd. (United Kingdom); Stevens, A.K. [Westlakes Scientific Consulting (United Kingdom)

2006-07-01

The first nuclear reactors at Sellafield went critical in 1951 and fuel reprocessing commenced shortly afterwards. As the nuclear programme expanded, reprocessing increased and there was an associated increase in discharges to the environment. An initial environmental monitoring programme was formulated on the basis of research and assessment of the likely behaviour of radionuclides. In addition to the routine process sources there were also incidents that gave rise to acute releases of radioactivity to the environment. Of key significance were: the Windscale fire, 1957; short-cooled fuel reprocessing, 1981; and discharge of contaminated solvent, 1983. All of these incidents added to the requirements for environments for environmental monitoring. The monitoring programme has evolved over a period of more than 50 years. (N.C.)

Pharmaceutical products as emerging contaminant in water: relevance for developing nations and identification of critical compounds for Indian environment.

Science.gov (United States)

Chinnaiyan, Prakash; Thampi, Santosh G; Kumar, Mathava; Mini, K M

2018-04-17

Pharmaceuticals and personal care products (PPCPs) are contaminants of emerging concern and have been detected worldwide in water bodies in trace concentrations. Most of these emerging contaminants are not regulated in water quality standards except a few in the developed countries. In the case of developing countries, research in this direction is at a nascent stage. For the effective management of Pharmaceutical contaminants (PC) in developing countries, the relevance of PCs as an emerging contaminant has to be analyzed followed by regular monitoring of the environment. Considering the resource constraints, this could be accomplished by identifying the priority compounds which is again region specific and dependent on consumption behavior and pattern. In this work, relevance of pharmaceutical compound as emerging contaminant in water for a developing country like India is examined by considering the data pertaining to pharmaceutical consumption data. To identify the critical Pharmaceutical Contaminants to be monitored in the Indian environment, priority compounds from selected prioritization methods were screened with the compounds listed in National List of Essential Medicine (NLEM), India. Further, information on the number of publications on the compound as an emerging contaminant, data on monitoring studies in India and the number of brands marketing the compound in India were also analyzed. It is found that out of 195 compounds from different prioritization techniques, only 77 compounds were found relevant to India based on NLEM sorting.

Radioactivity Monitoring of the Irish Environment 2006

International Nuclear Information System (INIS)

Smith, V.; Dowdall, A; Fegan, M.; Hayden, E.; Kelleher, K.; Long, S.; McEvoy, I.; Somerville, S.; Wong, J.; Pollard, D.

2007-10-01

This report presents the results of the environmental radioactivity monitoring programme carried out by the Radiological Protection Institute of Ireland (RPII) in 2006. This programme aims to assess the exposure of the Irish population to artificial radioactivity in the environment, to review the temporal and geographical distribution of contaminating radionuclides and to maintain systems and procedures which would allow a rapid assessment of environmental contamination to be made in the event of a radiological emergency. Radioactivity is present in the environment due to natural processes, the testing of nuclear weapons in the atmosphere, past nuclear accidents such as that at Chernobyl in Ukraine and the routine discharge of radionuclides from nuclear installations. Liquid discharges from the British Nuclear Group reprocessing plant at Sellafield in Cumbria in the north-west of England, which are licensed by the UK Environment Agency, continue to be the dominant source of artificial radioactivity in the Irish marine environment. The key elements of the monitoring programme implemented by the RPII in 2006 included; assessment of ambient radioactivity based on measurements of radioactivity in air and of external gamma dose rate at permanent monitoring stations located throughout the country; assessment of levels of radioactivity in drinking water; assessment of levels of radioactivity in foodstuffs based on measurements of total diet, milk and various ingredients; assessment of levels of radioactivity in the Irish marine environment based on sampling and measurement of seawater, sediment, seaweed, fish and shellfish. The RPII monitored airborne radioactivity at ten stations located throughout the country. One of these stations is equipped with a high volume sampler, which allows concentrations of caesium-137 to be measured; another is equipped to detect the presence of the gas krypton-85. This gas is released into the environment primarily as a result of the

Contaminant bioavailability in soils, sediments, and aquatic environments

OpenAIRE

Traina, Samuel J.; Laperche, Valérie

1999-01-01

The aqueous concentrations of heavy metals in soils, sediments, and aquatic environments frequently are controlled by the dissolution and precipitation of discrete mineral phases. Contaminant uptake by organisms as well as contaminant transport in natural systems typically occurs through the solution phase. Thus, the thermodynamic solubility of contaminant-containing minerals in these environments can directly influence the chemical reactivity, transport, and ecotoxici...

Monitoring of plutonium contaminated solid waste streams

International Nuclear Information System (INIS)

Birkhoff, G.; Notea, A.

1977-01-01

The planning of a system for monitoring Pu contaminated solid waste streams, from the nuclear fuel cycle, is considered on the basis of given facility waste management program. The inter relations between the monitoring system and the waste management objectives are stressed. Selection criteria with pertinent data of available waste monitors are given. Example of monitoring systems planning are presented and discussed

Honey as a bioindicator of environment contamination with caesium

International Nuclear Information System (INIS)

Barisic, D.; Lovrencic, I.; Orescanin, V.; Kezic, N.; Bubalo, D.; Popijac, M.; Volner, M.

2005-01-01

Collecting nectar and pollen, bees cover area of approximately 20 km 2 . Honey from a beehive represents a composite sample collected from several hundreds of millions of points and is probably one of the most representative random samples possible to collect in the environment. Therefore, information contained in honey gives good reflection of an average environment condition considering bioavailable elements and/or chemical compounds. Results of measured 1 37C s activities in different types of honey collected on the area of Republic of Croatia in period from 2000 to 2003 are given in this paper. The activity of 1 37C s is measured with gamma spectrometric method and the types of honey are defined on the basis of pollen analysis and from measuring electro conductivity. More than 15 years after the accident in Chernobyl, it is still possible to monitor 1 37C s activity in several types of honey. The greatest 1 37C s activities are detected in pure fir-tree and spruce honey-dew honey (15.7 ± 5.6 Bq/kg), mixed honey containing honey-dew (7.4 ± 3.9 Bq/kg) and in pure chestnut honey (4.5 ± 2.4 Bq/kg). On the other side, 1 37C s has not been found in any of the samples of pure lime- and locust-tree honeys, while in the meadow honey it has been detected only twice. Considering that measured activities of 1 37C s in honey correspond with the levels of contamination of particular areas, coniferous honey-dew honeys, as well as pure chestnut honey, can be used as bioindicators in monitoring the environment contaminated with 1 37C s.(author)

Radioactivity monitoring of the Irish marine environment 1991 and 1992

International Nuclear Information System (INIS)

McGarry, A.; Lyons, S.; McEnri, C.; Ryan, T.; O'Colmain, M.; Cunningham, J.D.

1994-05-01

This report presents the results of the Radiological Protection Institute's programme of monitoring of radioactivity in the seas around Ireland during 1991 and 1992. The principal objective of the monitoring programme is to review the risks to human health arising from the Sellafield discharges. Secondary objectives include studies of the distribution of the significant contaminating radionuclides in the marie environment and the identification of trends with a view to assessing possible future effects. Estimates of the radiation doses to the Irish public are also presented in this report. 23 refs. 24 tabs. 9 figs

Contamination control plan for prelaunch operations

Science.gov (United States)

Austin, J. D.

1983-01-01

A unified, systematic plan is presented for contamination control for space flight systems. Allowable contaminant quantities, or contamination budgets, are determined based on system performance margins and system-level allowable degradations. These contamination budgets are compared to contamination rates in ground environments to establish the controls required in each ground environment. The use of feedback from contamination monitoring and some contamination control procedures are discussed.

Study of monitoring protection of radionuclides contamination in organism by autoradiography

International Nuclear Information System (INIS)

Zhu Shoupeng; Kang Baoan; He Guangren

1987-01-01

In view of the exceptionally important role of the medical radiation protection in human health, the authors try to study on the monitoring of internal contamination of radionuclides in organism by different autoradiographic methods, such as: monitoring of the body retention of isolated or combined radionuclides by freezing microautoradiography; monitoring of blood, bone marrow and excreta radioactive samples by smear autoradiography; differentiation of two radionuclides contamination by double radionuclide autoradiography; especially, monitoring of low level of radionuclides contamination by fluorescence sensitization autoradiography. The sensitivity of autoradiographic formation was increased by the scintillator by 10 times

Modeling, Monitoring and Fault Diagnosis of Spacecraft Air Contaminants

Science.gov (United States)

Ramirez, W. Fred; Skliar, Mikhail; Narayan, Anand; Morgenthaler, George W.; Smith, Gerald J.

1998-01-01

Control of air contaminants is a crucial factor in the safety considerations of crewed space flight. Indoor air quality needs to be closely monitored during long range missions such as a Mars mission, and also on large complex space structures such as the International Space Station. This work mainly pertains to the detection and simulation of air contaminants in the space station, though much of the work is easily extended to buildings, and issues of ventilation systems. Here we propose a method with which to track the presence of contaminants using an accurate physical model, and also develop a robust procedure that would raise alarms when certain tolerance levels are exceeded. A part of this research concerns the modeling of air flow inside a spacecraft, and the consequent dispersal pattern of contaminants. Our objective is to also monitor the contaminants on-line, so we develop a state estimation procedure that makes use of the measurements from a sensor system and determines an optimal estimate of the contamination in the system as a function of time and space. The real-time optimal estimates in turn are used to detect faults in the system and also offer diagnoses as to their sources. This work is concerned with the monitoring of air contaminants aboard future generation spacecraft and seeks to satisfy NASA's requirements as outlined in their Strategic Plan document (Technology Development Requirements, 1996).

Bringing together raptor collections in Europe for contaminant research and monitoring in relation to chemicals regulations.

Science.gov (United States)

Movalli, Paola; Dekker, René; Koschorreck, Jan; Treu, Gabriele

2017-11-01

Raptors are good sentinels of environmental contamination and there is good capability for raptor biomonitoring in Europe. Raptor biomonitoring can benefit from natural history museums (NHMs), environmental specimen banks (ESBs) and other collections (e.g. specialist raptor specimen collections). Europe's NHMs, ESBs and other collections hold large numbers of raptor specimens and samples, covering long periods of time. These collections are potentially a valuable resource for contaminant studies over time and space. There are strong needs to monitor contaminants in the environment to support EU and national chemical management. However, data on raptor specimens in NHMs, ESBs and other collections are dispersed, few are digitised, and they are thus not easy to access. Specimen coverage is patchy in terms of species, space and time. Contaminant research with raptors would be facilitated by creating a framework to link relevant collections, digitising all collections, developing a searchable meta-database covering all existing collections, making them more visible and accessible for contaminant research. This would also help identify gaps in coverage and stimulate specimen collection to fill gaps in support of prioritised contaminant monitoring. Collections can further support raptor biomonitoring by making samples available for analysis on request.

Calibration of alpha surface contamination monitor

International Nuclear Information System (INIS)

Freitas, I.S.M. de; Goncalez, O.L.

1990-01-01

In this work, the results, as well as the methodology, of the calibration of an alpha surface contamination monitor are presented. The calibration factors are obtained by least-squares fitting with effective variance. (author)

Independent regulatory control and monitoring of the environment at the uranium legacy sites under reclamation

International Nuclear Information System (INIS)

Shandala, N.K.; Titov, A.V.; Kiselev, S.M.; Isaev, D.V.; Aladova, R.A.

2012-01-01

Full text: Radiation safety at areas affected by the natural uranium mining and milling facilities is very important for the environment protection and human health. For this purpose the close operator-regulator contact is required during remedial operations. One of the key mechanisms of the operating regulatory supervision of radiation safety at uranium legacy sites is organization of independent radiation control and monitoring in the course of reclamation and after its completion. The main stages of this strategy include: detailed radiation survey at the area and in the vicinity of the former uranium mining sites; threat assessment in order to identify the regulatory priorities; environmental radiation control and monitoring. Tailings and shallow disposal sites of the uranium mining wastes are the most critical areas in terms of potential hazard for the environment. Tailings are the source of contamination of the near-land air due to the radionuclide dust resuspension from the tailing surface; surface and ground water due to washing out from by precipitation and surface streams of toxic and radioactive elements. Frequently, contamination of surface and ground waters results in some problems, especially when using the leaching fluids for the solution mining and draining hydraulic fluids. Radiation risk for the residents of areas near not operating uranium mining and milling facilities depends on the following factors: radon exhalation from the surface of dumps and tailing; radioactive dust transfer; using radioactive material in building; contamination of surface water streams and aquifers used for drinking water supply; contamination of open ponds used for fish breeding and catching; contamination of foodstuffs grown in the nuclear legacy areas. Radiation monitoring is necessary for the up-to-date response to changing radiation situation during reclamation and arrangement of adequate countermeasures. We mean here comprehensive dynamic surveillance including long

Monitoring of airborne contamination during the handling of technetium-99m and radioiodine

International Nuclear Information System (INIS)

Eadie, A.S.; Horton, P.W.; Hilditch, T.E.

1980-01-01

Measurements have been made using an air sampler to measure airborne radioactivity produced during the routine handling of large activities of technetium-99m, iodine-125 and iodine-131. The results indicate that 99 Tcsup(m) can be safely handled in environments without direct exhaust of the ventilated air but that 125 I and 131 I should always be handled in a ventilated environment such as a fume cupboard or a down-draught work-station of the total-exhaust type. Monitoring of thyroid uptake proves to be the most reliable means of monitoring airborne contamination by these radionuclides, but burdens and radiation doses for typical procedures are well within the maximum permissible limits of the Code of Practice for the Protection of Persons from Ionizing Radiation arising from Medical and Dental Use. (author)

Optimization of monitoring sewage with radionuclide contaminants

International Nuclear Information System (INIS)

Egorov, V.N.

1991-01-01

Recommendations on optimization of monitoring contaminated sewage aimed at enviromental protection agxinst radioactive contamination at minimum cost are presented. The way of selecting water sampling technique depends on water composition stability and flow rate. Depending on the type of radionuclide distribution in the sewage one can estimate minimum frequency of sampling or number of samples sufficient for assuring reliability of the conclusion on the excess or non-excess of permissible radioactive contamination levels, as well as analysis assigned accuracy. By irregular contaminated sewage-discharge and possibility of short-term releases of different form and duration, sampling should be accomplished through automatic devices of continuons or periodic operation

Applicability of monitored natural attenuation at radioactively contaminated sites

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-01-15

grouped into three categories: non-intervention, containment and removal. This report discusses in detail the necessary prerequisites, processes involved and applicability of non-intervention as a strategy for dealing with radioactive contamination. Particular emphasis is put on modelling tools as integral elements of monitored natural attenuation (MNA). It provides a comprehensive critique of, and explores the limits of, the applicability of MNA. While MNA is de facto relied upon in many instances where contamination cannot be completely removed from an engineered repository, it is emphasized that non-intervention is not equivalent to a 'do nothing' option. In order to rely on MNA safely, a thorough understanding of the site and the migration behaviour of the contaminants in the given environment is needed. This is gained from a comprehensive site investigation. This report complements other recent reports on remediation techniques and strategies with a less invasive concept. An extensive body of references including relevant web sites will help the reader to find more detailed or more up-to-date information.

Applicability of monitored natural attenuation at radioactively contaminated sites

International Nuclear Information System (INIS)

2006-01-01

grouped into three categories: non-intervention, containment and removal. This report discusses in detail the necessary prerequisites, processes involved and applicability of non-intervention as a strategy for dealing with radioactive contamination. Particular emphasis is put on modelling tools as integral elements of monitored natural attenuation (MNA). It provides a comprehensive critique of, and explores the limits of, the applicability of MNA. While MNA is de facto relied upon in many instances where contamination cannot be completely removed from an engineered repository, it is emphasized that non-intervention is not equivalent to a 'do nothing' option. In order to rely on MNA safely, a thorough understanding of the site and the migration behaviour of the contaminants in the given environment is needed. This is gained from a comprehensive site investigation. This report complements other recent reports on remediation techniques and strategies with a less invasive concept. An extensive body of references including relevant web sites will help the reader to find more detailed or more up-to-date information

ISS External Contamination Environment for Space Science Utilization

Science.gov (United States)

Soares, Carlos; Mikatarian, Ron; Steagall, Courtney; Huang, Alvin; Koontz, Steven; Worthy, Erica

2014-01-01

(1) The International Space Station is the largest and most complex on-orbit platform for space science utilization in low Earth orbit, (2) Multiple sites for external payloads, with exposure to the associated natural and induced environments, are available to support a variety of space science utilization objectives, (3) Contamination is one of the induced environments that can impact performance, mission success and science utilization on the vehicle, and (4)The ISS has been designed, built and integrated with strict contamination requirements to provide low levels of induced contamination on external payload assets.

Mollusc shells as archival indicators of metal contamination in the Australian antarctic marine environment

International Nuclear Information System (INIS)

Simpson, R.D.

2000-01-01

Full text: Although considered by many to be a pristine environment past activities in Antarctica have caused localised contamination. In particular, the practice of disposing of station waste in open tips adjacent to the seashore has caused heavy metals to migrate to the marine environment. Times have changed and these practices are no longer permitted. Under international agreements, such as the Protocol on Environmental Protection to the Antarctic Treaty System, operators are now required to clean-up these sites so long as the act of clean-up does not cause greater environmental harm than leaving them where they are. The Australian Antarctic Division has embarked on a program to develop techniques for clean-up and remediation of disused waste disposal sites and is also developing techniques for monitoring the environment to ensure that clean-up does not cause greater environmental harm. The Antarctic clam, Laternula elliptica, is common in near shore sediments around the entire coast of Antarctica. It is a filter feeder that extracts suspended sediments from the water column and has been suggested as a candidate for mussel watch-type monitoring in Antarctica. Contaminants in waste disposal tips in Antarctica are likely to be mobilised in pulses caused by the seasonal flush of melting snow as it passes through the contaminated material. As a filter feeder Laternula will be exposed to the highest concentrations of contaminants while they remain in suspension. If contaminants are sequestered into the shells of the bivalve and if their levels in the shell can be analysed in relation to the annual growth rings then they may prove to be a useful archive of past environmental contamination. Specimens of Laternula were exposed to known concentrations of copper and cadmium under aquarium conditions in Antarctica to understand accumulation and depuration rates in the soft tissues. This information is used to assist interpretation of concentrations in animals collected

Review on phytoremediation of uranium-contaminated environment

International Nuclear Information System (INIS)

Zhang Xueli; Wang Erqi

2008-01-01

Phytoremediation, a promising technology using plants to remove radioactive contaminants from the environment or to render them harmless, has become a hot topic in current research. Studies on phytoremediation of uranium-contaminated environment are reviewed with special focuses on several subsets including types of phytoremediation of uranium (such as phytoextraction, rhizofiltration and phytostabilization), influencing factors (such as plant species, soil properties, microorganism, soil amendments, fertilization and uranium speciation) of uranium accumulation by plants, cases studies and trend in phytoremediation of uranium. (authors)

Emerging Contaminants in the Environment

Science.gov (United States)

This chapter explores the use of mass spectrometry and its application to emerging contaminants (ECs) in the environment; such classes of compounds as organometallics, pharmaceuticals/drugs, nanomaterials, and dispersants (surfactants). Table 1 shows the variety of ECs that are...

Radioactive contamination in monitors received for calibration; Contaminacao em monitores de radiacao recebidos para calibracao

Energy Technology Data Exchange (ETDEWEB)

Dias, Paulo S.; Santos, Gilvan C. dos; Brunelo, Maria Antonieta G.; Paula, Tiago C. de; Pires, Marina A.; Borges, Jose C. [MRA Comercio de Instrumentos Eletronicos Ltda., Jardinopolis, SP (Brazil). Centro de Ensaios e Pesquisas em Metrologia (METROBRAS)

2013-10-01

The Calibration Laboratory - LABCAL, from the Research Center for Metrology and Testing - METROBRAS, MRA Comercio de Instrumentos Eletronicos Ltda., began activities in October 2008 and, in August 2009, decided to establish a procedure for monitoring tests, external and internal, of all packages received from customers, containing instruments for calibration. The aim was to investigate possible contamination radioactive on these instruments. On July 2011, this procedure was extended to packagings of personal thermoluminescent dosemeters - TLD, received by the newly created Laboratory Laboratorio de Dosimetria Pessoal - LDP . In the monitoring procedure were used monitors with external probe, type pancake, MRA brand, models GP - 500 and MIR 7028. During the 37 months in which this investigation was conducted, were detected 42 cases of radioactive contamination, with the following characteristics: 1) just one case was personal dosimeter, TLD type; 2) just one case was not from a packing from nuclear medicine service - was from a mining company; 3) contamination occurred on packs and instruments, located and/or widespread; 4) contamination values ranged from slightly above the level of background radiation to about a thousand fold. Although METROBRAS has facilities for decontamination, in most cases, especially those of higher contamination, the procedure followed was to store the contaminated material in a room used for storage of radioactive sources. Periodically, each package and/or instrument was monitored, being released when the radiation level matched the background radiation. Every contamination detected, the client and/or owner of the instrument was informed. The Brazilian National Energy Commission - CNEN, was informed, during your public consultation for reviewing the standard for nuclear medicine services, held in mid-2012, having received from METROBRAS the statistical data available at the time. The high frequency of contamination detected and the high

Testing of portal monitors for personnel contamination control

International Nuclear Information System (INIS)

Johnson, L.O.; Gupta, V.P.; Stevenson, R.L.; Stalker, A.C.; Baker, K.R.; Littleton, M.L.; Rich, B.L.

1983-04-01

This is a report of an INPO-funded evaluation of state-of-the-art portal monitors used to detect personnel contamination. The project developed techniques and procedures to evaluate the performance and sensitivity of the portal monitors which provided data for intercomparison. An additional accomplishment was development of a methodology to assist manufacturers and users to optimize the monitor settings, and to provide technical basis for the eventual use of fixed monitors to replace frisking for contamination control. The monitors tested utilize thin-window gas-flow proportional counters sensitive to beta and gamma radiation. Various tests were performed: (1) background count rate and the statistical variability, (2) detector efficiency at different distances, (3) moving source sensitivity for various size sources and speeds, and (4) false alarm rates at different background levels. A model has been developed for the moving source measurements to compare the experimental data, and to test whether it is possible to adequately model the behavior of a portal monitor response to a moving source. The model results with the actual test results are compared

Radioactivity monitoring of the Irish marine environment 1993 to 1995

International Nuclear Information System (INIS)

Pollard, D.; Long, S.; Hayden, E.; Smith, V.; Ryan, T.P.; Dowdall, A.; McGarry, A.; Cunningham, J.D.

1996-10-01

This report presents the results of the marine radioactivity monitoring programme carried out by the Radiological Protection Institute of Ireland during the period 1993 to 1995. The principal objective of this programme is to assess the exposure to the Irish population arising from radioactive contamination in the Irish marine environment and to estimate the risks to human health arising from such exposure. In addition, the programme aims to assess the distribution of the significant contaminating radionuclides in the marine environment and to identify tends with a view to assessing possible future effects. The results show that by 1995 the mean concentration of caesium-137 in fish landed at north-east ports had fallen to 1.6 Bq/kg, from a figure of 68 Bq/kg in 1979-82 and 3.0 Bq/kg in 1993. A similar decline is evident for seawater, sediment and seaweed. In addition, the Irish Sea data show the progressive dilution of artificial radioactivity with increasing distance from Sellafield

The status on contamination monitoring in Thailand

Energy Technology Data Exchange (ETDEWEB)

Sinakhom, Fookiat [Office of Atomic Energy for Peace, Bangkok (Thailand)

1997-06-01

Thailand has embarked upon the development of nuclear energy for peaceful utilizations since 1961 when the Atomic Energy for Peace Act was enacted. The Atomic Energy Commission (Thai AEC) was established under section 5 of this Act having power and duty of carrying out matters concerning atomic energy for peace. The applications of nuclear energy in Thailand, at present are exclusively in medicine, education, research and industry. In this paper, the following items are described on contamination monitoring: controllable monitoring, uncontrollable monitoring, standardization of monitoring instruments, and decontamination and waste management. (G.K.)

Long-range alpha detection applied to soil contamination and waste monitoring

International Nuclear Information System (INIS)

MacArthur, D.W.; Allander, K.S.; Bounds, J.A.; Close, D.A.; McAtee, J.L.

1992-01-01

Alpha contamination monitoring has been traditionally limited by the short range of alpha particles in air and through detector windows. The long-range alpha detector (LRAD) described in this paper circumvents that limitation by detecting alpha-produced ions, rather than alpha particles directly. Since the LRAD is sensitive to all ions, it can monitor all contamination present on a large surface at one time. Because air is the ''detector gas,'' the LRAD can detect contamination on any surface to which air can penetrate. We present data showing the sensitivity of LRAD detectors, as well as documenting their ability to detect alpha sources in previously unmonitorable locations, and verifying the ion lifetime. Specific designs and results for soil contamination and waste monitors are also included

International Space Station External Contamination Environment for Space Science Utilization

Science.gov (United States)

Soares, Carlos E.; Mikatarian, Ronald R.; Steagall, Courtney A.; Huang, Alvin Y.; Koontz, Steven; Worthy, Erica

2014-01-01

The International Space Station (ISS) is the largest and most complex on-orbit platform for space science utilization in low Earth orbit. Multiple sites for external payloads, with exposure to the associated natural and induced environments, are available to support a variety of space science utilization objectives. Contamination is one of the induced environments that can impact performance, mission success and science utilization on the vehicle. The ISS has been designed, built and integrated with strict contamination requirements to provide low levels of induced contamination on external payload assets. This paper addresses the ISS induced contamination environment at attached payload sites, both at the requirements level as well as measurements made on returned hardware, and contamination forecasting maps being generated to support external payload topology studies and science utilization.

The monitoring of radioactive contamination and radiation exposure in the environment in Germany- tasks, techniques, realizations

International Nuclear Information System (INIS)

Bayer, A.

1998-01-01

A brief historical account of the development of the monitoring of radioactivity in the environment in Germany is given. The aims of monitoring and the tasks, classified according to the possible sources of release, are presented and the methods required are described. The monitoring systems, set up on the basis of different legal principles, are presented and the technical realization of these including their current state of development, is described. Finally, an account is given of the coordination of the national monitoring systems which is at present in progress, as well as of the integration of these monitoring systems into international monitoring and information networks. (author)

Absorption-Edge-Modulated Transmission Spectra for Water Contaminant Monitoring

Science.gov (United States)

2016-03-31

Naval Research Laboratory Washington, DC 20375-5320 NRL/MR/6390--16-9675 Absorption- Edge -Modulated Transmission Spectra for Water Contaminant...ABSTRACT c. THIS PAGE 18. NUMBER OF PAGES 17. LIMITATION OF ABSTRACT Absorption- Edge -Modulated Transmission Spectra for Water Contaminant Monitoring...contaminants, within a volume of sampled solution, requires sufficient sensitivity. The present study examines the sensitivity of absorption- edge

Study on phytoremediation in the uranium contaminated environment

International Nuclear Information System (INIS)

Huang Dejuan; Zhu Yean; Hua Rong; Yu Yue; Luo Mingbiao; Liu Qingcheng; Huang Dechao

2012-01-01

Mechanisms of phytoremediation in the uranium contaminated environment are described, and a worldwide overview of the content and progress of the related research topics is provided. Based on the analysis, it is pointed out that we should strengthen the research of plant-microbial coexistence system as well as the research of the related molecular biology and genetic engineering in order to enhance the phytoremediation's efficiency in the uranium contaminated environment. (authors)

Radioactive Environment Contamination and Abilities of the Modern Radiochemistry in the Field of Nuclear Waste Disposal and Monitoring

International Nuclear Information System (INIS)

Myasoedov, B.F.; Novikov, A.P.

1999-01-01

The study of environmental contamination caused by anthropogenic impacts and, primarily, by radioactive nuclides is one of the main scientific problems facing contemporary science. This is known as Radioecological monitoring. Decisions regarding the remediation of polluted areas require detailed information about the distribution of radioactive nuclides in terrestrial and aquatic ecosystems, as well as, knowledge about radionuclides occurrence forms and migration patterns. Different sources of radionuclides penetration into the environment appoint their interaction with nature matrices in different ways and should be considered accordingly. An overview is given of the present radioecological situation around the reprocessing plant M ayak , which was constructed more than 40 years ago for the production of plutonium for military purposes. Some new approaches, methods and tools developed at the Vernadsky Institute of Geochemistry and Analytical Chemistry for the isolation, concentration and determination of radionuclides in various environmental samples are discussed. Data regarding the distribution, occurrence, and migration processes of radionuclides 90 Sr, 137 Cs, 239 Pu and 241 Am, in aquatic and terrestrial ecosystems of the impact zone of the Mayak plant, are presented

Radioactivity Monitoring of the Irish Environment 2009

International Nuclear Information System (INIS)

McGinnity, P.; Currivan, L.; Dowdall, A.; Fegan, M.; Hanley, O.; Kelleher, K.; McKittrick, L.; Somerville, S.; Wong, J.; Pollard, D.

2010-12-01

This report presents the results of the environmental radioactivity monitoring programme carried out by the Radiological Protection Institute of Ireland (RPII) during 2009. The RPII has routinely monitored levels of radioactivity in the environment since 1982 and this is the latest in the RPII's series of environmental monitoring reports. The RPII reviews and updates its environmental programme annually so as to ensure it remains relevant and continues to focus on the most important sources of radioactivity in the environment. The principal aims of the RPII's monitoring programme are; to assess the level of radioactivity to which the Irish population is exposed as a result of radioactivity in the environment; to study trends and establish the geographical distribution of contaminating radionuclides so as to better understand the long term behaviour of artificial radioactivity in the food chain and the environment; to ensure that any increase in radiation levels resulting from an accidental release of radioactivity to the environment is detected and assessed rapidly. During 2009 radioactivity was measured in a wide range of foods and environmental materials including: air, water, milk, seafood, foodstuffs and complete meals. The most significant source of artificial radioactivity in the Irish marine environment is the discharge of low level liquid radioactive waste from the Sellafield Nuclear Fuel Reprocessing Plant on the north east coast of England. In order to assess the exposure arising from the source extensive sampling of fish and shellfish landed at ports along the north east coast of Ireland is undertaken. The most exposed group of individuals to discharges from Sellafield have been identified as commercial oyster and mussel farmers working along the north east coastline and their families. Manmade radioactivity is also present in the terrestrial environment due primarily to residual global fallout arising primarily from atmospheric testing of nuclear

Radioactivity Monitoring of the Irish Environment 2008

International Nuclear Information System (INIS)

Fegan, M.; Currivan, L.; Dowdall, A.; Hanley, O.; Hayden, E.; Kelleher, K.; Long, S.; McKittrick, L.; Somerville, S.; Wong, J.; Pollard, D.

2010-01-01

This report presents the results of the environmental radioactivity monitoring programme carried out by the Radiological Protection Institute of Ireland (RPII) during 2008. The RPII has routinely monitored levels of radioactivity in the environment since 1982 and this is the latest in the RPII's series of environmental monitoring reports. The RPII reviews and updates its environmental programme annually so as to ensure it remains relevant and continues to focus on the most important sources of radioactivity in the environment. The principal aims of the RPII's monitoring programme are; to assess the level of radioactivity to which the Irish population is exposed as a result of radioactivity in the environment; to study trends and establish the geographical distribution of contaminating radionuclides so as to better understand the long term behaviour of artificial radioactivity in the food chain and the environment; to ensure that any increase in radiation levels resulting from an accidental release of radioactivity to the environment is detected and assessed rapidly. During 2008 radioactivity was measured in a wide range of foods and environmental materials including: air, water, milk, seafood, foodstuffs and complete meals. The most significant source of artificial radioactivity in the Irish marine environment is the discharge of low level liquid radioactive waste from the Sellafield Nuclear Fuel Reprocessing Plant on the north east coast of England. In order to assess the exposure arising from the source extensive sampling of fish and shellfish landed at ports along the north east coast of Ireland is undertaken. The most exposed group of individuals to discharges from Sellafield have been identified as commercial oyster and mussel farmers working along the north east coastline and their families. Manmade radioactivity is also present in the terrestrial environment due primarily to residual global fallout arising primarily from atmospheric testing of nuclear

Innovative Methods for Integrating Knowledge for Long-Term Monitoring of Contaminated Groundwater Sites: Understanding Microorganism Communities and their Associated Hydrochemical Environment

Science.gov (United States)

Mouser, P. J.; Rizzo, D. M.; Druschel, G.; O'Grady, P.; Stevens, L.

2005-12-01

This interdisciplinary study integrates hydrochemical and genome-based data to estimate the redox processes occurring at long-term monitoring sites. Groundwater samples have been collected from a well-characterized landfill-leachate contaminated aquifer in northeastern New York. Primers from the 16S rDNA gene were used to amplify Bacteria and Archaea in groundwater taken from monitoring wells located in clean, fringe, and contaminated locations within the aquifer. PCR-amplified rDNA were digested with restriction enzymes to evaluate terminal restriction fragment length polymorphism (T-RFLP) community profiles. The rDNA was cloned, sequenced, and partial sequences were matched against known organisms using the NCBI Blast database. Phylogenetic trees and bootstrapping were used to identify classifications of organisms and compare the communities from clean, fringe, and contaminated locations. We used Artificial Neural Network (ANN) models to incorporate microbial data with hydrochemical information for improving our understanding of subsurface processes.

Radioactivity Monitoring of the Irish Environment 2007

International Nuclear Information System (INIS)

Fegan, M.; Dowdall, A.; Hanley, O.; Hayden, E.; Kelleher, K.; Long, S.; Smith, V.; Somerville, S.; Wong, J.; Pollard, D.

2008-10-01

This report presents the results of the environmental radioactivity monitoring programme carried out by the Radiological Protection Institute of Ireland (RPII) in 2007. This programme aims to assess the exposure of the Irish population to artificial radioactivity in the envorinment, to review the temporal and geographical distribution of contaminating radionuclides and to maintain systems and procedures which would allow a rapid assessment of environmental contamination to be made in the event of a radiological emergency. In additiopn, some natural radioactivity exposure pathways are included in the programme including radioactivity in surface and ground drinking water. Radioactivity is present in the environment due to natural oprocesses, the testing of nuclear weapons in the atmosphere, past nuclear accidents such as that at Chernobyl in the Ukraine and the routine discharge of radionuclides from nuclear installations. Liquid discharges from the British Nuclear Group reprocessing plant at Sellafield in Cumbria in the north-west of England continue to be the dominant source of artificial radioactivity in the Irish marine environment. The key elements of the monitoring programme implemented by the RPII in 2007 included; assessment of ambient radioactivity based on measurements of radioactivity in air and of external gamma dose rate at permanent monitoring stations located throughout the country; assessment of levels of radioactivity in drinking water; assessment of levels of radioactivity in foodstuffs based on measurements of total diet, milk and various ingredients; assessment of levels of radioactivity in the Irish marine environment based on sampling and measurement of seawater, sediment, seaweed, fish and shellfish. The RPII monitored airborne radioactivity at twelve stations located throughout the country. One of these stations is equipped with a high volume sampler, which allows background concentrations of caesium-137 to be measured; another is equipped to

Review of passive accumulation devices for monitoring organic micropollutants in the aquatic environment

International Nuclear Information System (INIS)

Stuer-Lauridsen, Frank

2005-01-01

Over the past 15 years passive sampling devices have been developed that accumulate organic micropollutants and allow detection at ambient sub ng/l concentrations. Most passive accumulation devices (PADs) are designed for 1-4 weeks field deployment, where uptake is governed by linear first order kinetics providing a time weighted average of the exposure concentration. Semipermeable membrane devices (SPMDs) are the most comprehensively studied PADs, but other samplers may also be considered for aquatic monitoring purposes. The applicability of the PADs is reviewed with respect to commonly monitored aqueous matrices and compounds, the detection limits, and for use in quantitative monitoring related to requirements embedded in the EU Water Framework Directive, the US and EU Water Quality Criteria, and the Danish monitoring aquatic programme. The PADs may monitor >75% of the organic micropollutants of the programmes. Research is warranted regarding the uptake in PADs in low flow environments and for the development of samplers for polar organic compounds. - Major developments in the passive sampling of organic contaminants in aquatic environments will support future monitoring, compliance and research

Monitoring of tritium-contaminated surfaces, including skin

International Nuclear Information System (INIS)

Surette, R.A.; Wood, M.J.

1994-05-01

We have examined various commercially available tritium surface contamination monitors along with different swipe media and techniques for direct and indirect (swipe) monitoring of contaminated surfaces, including skin. None of the methods or instruments evaluated were more sensitive than the swipe and liquid scintillation counting (LSC) method. Swipe measurements with open-window proportional counters were, in general, less than half as sensitive as LSC, but have the advantages of having the results available almost immediately, and no sample preparation is required. The Nuclear Measurement Corporation's PC-55 is the most suitable instrument we tested for the analysis of routine swipe measurement. The PC-55 was about one third as sensitive as LSC when used with Ontario Hydro filter paper swipe media. Surface contamination measurement results can be obtained within minutes using the PC-55, compared to hours using LSC. The selection of swipe media for use with proportional counter-based instruments is critical. A medium that is electrically insulating can develop an electrostatic charge on its surface; this may alter the field gradient in the detector and may adversely influence the results. Although the PC-55 is sufficiently sensitive and very convenient, operational experience with the instrument is needed before recommending that it replace current LSC methods. The PC-55's susceptibility to internal tritium contamination may limit its practical usefulness. Because of the complexity of using live animals to evaluate direct and indirect methods for assessing skin contamination, pig skin was investigated as a possible substitute. We concluded that, for the first few hours post-exposure, pig skin mimics the kinetics of animal skin that has contacted a tritium-contaminated surface. (author). 30 refs., 1 tab., 7 figs

A Coupled model for ERT monitoring of contaminated sites

Science.gov (United States)

Wang, Yuling; Zhang, Bo; Gong, Shulan; Xu, Ya

2018-02-01

The performance of electrical resistivity tomography (ERT) system is usually investigated using a fixed resistivity distribution model in numerical simulation study. In this paper, a method to construct a time-varying resistivity model by coupling water transport, solute transport and constant current field is proposed for ERT monitoring of contaminated sites. Using the proposed method, a monitoring model is constructed for a contaminated site with a pollution region on the surface and ERT monitoring results at different time is calculated by the finite element method. The results show that ERT monitoring profiles can effectively reflect the increase of the pollution area caused by the diffusion of pollutants, but the extent of the pollution is not exactly the same as the actual situation. The model can be extended to any other case and can be used to scheme design and results analysis for ERT monitoring.

Radioactive contamination of the Guatemalan marine environment

International Nuclear Information System (INIS)

Perez-Sabino, J.F.; Oliva de Sandoval, B.E.; Orozco-Chilel, R.M.; Aguilar-Sandoval, E.

1999-01-01

As part of the IAEA TC project GUA/2/005 'Radioactivity and Contamination of the Marine Environment in Guatemala', concentrations of artificial and natural radionuclides have been determined in marine water and sediments, giving important information to establish the base line of the natural radioactivity and the radioactive contamination in this area that not have been studying

Monitoring of organic contaminants in sediments using low field proton nuclear magnetic resonance

Science.gov (United States)

Zhang, Chi; Rupert, Yuri

2016-04-01

The effective monitoring of soils and groundwater contaminated with organic compounds is an important goal of many environmental restoration efforts. Recent geophysical methods such as electrical resistivity, complex conductivity, and ground penetrating radar have been successfully applied to characterize organic contaminants in the subsurface and to monitor remediation process both in laboratory and in field. Low field proton nuclear magnetic resonance (NMR) is a geophysical tool sensitive to the molecular-scale physical and chemical environment of hydrogen-bearing fluids in geological materials and shows promise as a novel method for monitoring contaminant remediation. This laboratory research focuses on measurements on synthetic samples to determine the sensitivity of NMR to the presence of organic contaminants and improve understanding of relationships between NMR observables, hydrological properties of the sediments, and amount and state of contaminants in porous media. Toluene, a light non-aqueous phase liquid (LNAPL) has been selected as a representative organic contaminant. Three types of porous media (pure silica sands, montmorillonite clay, and various sand-clay mixtures with different sand/clay ratios) were prepared as synthetic sediments. NMR relaxation time (T2) and diffusion-relaxation (D - T2) correlation measurements were performed in each sediment saturated with water and toluene mixed fluid at assorted concentrations (0% toluene and 100% water, 1% toluene and 99% water, 5% toluene and 95% water, 25% toluene and 75% water, and 100% toluene and 0% water) to 1) understand the effect of different porous media on the NMR responses in each fluid mixture, 2) investigate the role of clay content on T2 relaxation of each fluid, 3) quantify the amount hydrocarbons in the presence of water in each sediment, and 4) resolve hydrocarbons from water in D - T2 map. Relationships between the compositions of porous media, hydrocarbon concentration, and hydraulic

Small mammals as monitors of environmental contaminants

International Nuclear Information System (INIS)

Talmage, S.S.; Walton, B.T.

1991-01-01

The merit of using small mammals as monitors of environmental contaminants was assessed using data from the published literature. Information was located on 35 species of small mammals from 7 families used to monitor heavy metals, radionuclides, and organic chemicals at mine sites, industrial areas, hazardous and radioactive waste disposal sites, and agricultural and forested land. To document foodchain transfer of chemicals, concentrations in soil, vegetation, and invertebrates, where available, were included. The most commonly trapped North American species were Peromyscus leucopus, Blarina brevicauda, and Microtus pennsylvanicus. In these species, exposure to chemicals was determined from tissue residue analyses, biochemical assays, and cytogenetic assays. Where enough information was available, suitable target tissues, or biological assays for specific chemicals were noted. In general, there was a relationship between concentrations of contaminants in the soil or food, and concentrations in target tissues of several species. This relationship was most obvious for the nonessential heavy metals, cadmium, lead, and mercury and for fluoride. Kidney was the single best tissue for residue analyses of inorganic contaminants. However, bone should be the tissue of choice for both lead and fluorine. Exposure to lead was also successfully documented using biochemical and histopathological endpoints. Bone was the tissue of choice for exposure to 90Sr, whereas muscle was an appropriate tissue for 137Cs. For organic contaminants, exposure endpoints depended on the chemical(s) of concern. Liver and whole-body residue analyses, as well as enzyme changes, organ histology, genotoxicity, and, in one case, population dynamics, were successfully used to document exposure to these contaminants

Radioactive contamination of the Guatemalan marine environment

Energy Technology Data Exchange (ETDEWEB)

Perez-Sabino, J F; Oliva de Sandoval, B E; Orozco-Chilel, R M; Aguilar-Sandoval, E [Universidad de San Carlos de Guatemala, Facultad de Ciencias Quimicas y Farmacia, Unidad de Analisis Instrumental, Guatemala C.A. (Guatemala)

1999-07-01

As part of the IAEA TC project GUA/2/005 `Radioactivity and Contamination of the Marine Environment in Guatemala`, concentrations of artificial and natural radionuclides have been determined in marine water and sediments, giving important information to establish the base line of the natural radioactivity and the radioactive contamination in this area that not have been studying 4 refs, 1 fig., 4 tabs

Design and Development of Hand and Foot Contamination Monitor

Directory of Open Access Journals (Sweden)

F. Akter

2014-08-01

Full Text Available A hand and foot contamination monitor is a health physics instrument to provide detection and measurement of beta-gamma contamination on the palm of each hand and on the bottom surface of both feet/shoes. There are four channels of detection for two hands and two feet. Four G-M detectors have been used in a single unit to cover the whole area of hand and feet. A regulated high voltage DC power supply (900 V has been designed using the PIC12F675 microcontroller to operate the pancake Geiger-Müller detectors. The reading is displayed on a linearly scaled 0-100 Bq/cm2 analog panel meter. The monitor detects beta–gamma radiation emitted by radioactive materials, and if the detected value exceeds a preset level, the monitor sounds an alarm and displays a reading in the respective panel meter. Indicator lamps are used to show the status of contamination. The performance of the system has been tested by using pulse generator and by flat surface radioactive calibration sources. Electronic linearity, detection efficiency, response to the contamination, calibration factor and percentage of error has been measured. Test results were satisfactory and the present system can be used instead of similar imported instruments.

Monitoring of tritium-contaminated surfaces, including skin

Energy Technology Data Exchange (ETDEWEB)

Surette, R A; Wood, M J

1994-05-01

We have examined various commercially available tritium surface contamination monitors along with different swipe media and techniques for direct and indirect (swipe) monitoring of contaminated surfaces, including skin. None of the methods or instruments evaluated were more sensitive than the swipe and liquid scintillation counting (LSC) method. Swipe measurements with open-window proportional counters were, in general, less than half as sensitive as LSC, but have the advantages of having the results available almost immediately, and no sample preparation is required. The Nuclear Measurement Corporation`s PC-55 is the most suitable instrument we tested for the analysis of routine swipe measurement. The PC-55 was about one third as sensitive as LSC when used with Ontario Hydro filter paper swipe media. Surface contamination measurement results can be obtained within minutes using the PC-55, compared to hours using LSC. The selection of swipe media for use with proportional counter-based instruments is critical. A medium that is electrically insulating can develop an electrostatic charge on its surface; this may alter the field gradient in the detector and may adversely influence the results. Although the PC-55 is sufficiently sensitive and very convenient, operational experience with the instrument is needed before recommending that it replace current LSC methods. The PC-55`s susceptibility to internal tritium contamination may limit its practical usefulness. Because of the complexity of using live animals to evaluate direct and indirect methods for assessing skin contamination, pig skin was investigated as a possible substitute. We concluded that, for the first few hours post-exposure, pig skin mimics the kinetics of animal skin that has contacted a tritium-contaminated surface. (author). 30 refs., 1 tab., 7 figs.

Contamination of the Aquatic Environment with Neonicotinoids and its Implication for Ecosystems

Directory of Open Access Journals (Sweden)

Francisco Sánchez-Bayo

2016-11-01

Full Text Available The widespread use of systemic neonicotinoid insecticides in agriculture results first in contamination of the soil of the treated crops, and secondly in the transfer of residues to the aquatic environment. The high toxicity of these insecticides to aquatic insects and other arthropods has been recognized, but there is little awareness of the impacts these chemicals have on aquatic environments and the ecosystem at large. Recent monitoring studies in several countries, however, have revealed a world-wide contamination of creeks, rivers and lakes with these insecticides, with residue levels in the low μg/L (ppb range. The current extent of aquatic contamination by neonicotinoids is reviewed first, and the findings contrasted with the known acute and chronic toxicity of neonicotinoids to various aquatic organisms. Impacts on populations and aquatic communities, mostly using mesocosms, are reviewed next to identify the communities most at risk from those that undergo little or no impact. Finally, the ecological links between aquatic and terrestrial organisms are considered. The consequences for terrestrial vertebrate species that depend mainly on this food source are discussed together with impacts on ecosystem function. Gaps in knowledge stem from difficulties in obtaining long-term experimental data that relates the effects on individual organisms to impacts on populations and ecosystems. The paper concludes with a summary of findings and the implications they have for the larger ecosystem.

Forensic recovery within contaminated environment

International Nuclear Information System (INIS)

Williams, S.

2002-01-01

Full text: The Exhibit Handling System, operated by the Anti-Terrorist Branch, has evolved from experiences whilst dealing with long term domestic terrorism and the subsequent prosecution of the offenders. Stringent U.K. criminal law in regard to exhibits and forensic evidence required a strict system in order to provide continuity and integrity to every item that came into possession of the Police. This system also applies to items that are eventually deemed 'unused', as nearly all evidence is disclosed to the defence. I believe that if a system can withstand the close examination that British Criminal Law provides, it will probably be suitable in most countries. The system relies on each item being supplied with a documented trail of all persons who have had possession of it and who have opened the security packaging for examination purposes. In contaminated environments the initial process within the system has to be adapted in order that strict monitoring of the items can be carried out during the packaging process. It is also recognized that access to many exhibits will be heavily restricted and therefore protocols are in place to interrogate the evidence at the packaging stage in order to avoid unnecessary spread of contamination. The protocols are similar for both radiological and nuclear incidents as well as chemical and biological. Regardless of the type of incident the system can be adapted on the advice of the relevant scientific authority. In the U.K. for radiological and nuclear incidents that authority would be the A.W.E. Aldermaston. The integrity and continuity regime should be continued within laboratories which are conducting examinations of exhibits recovered. It is also important that Nuclear Forensic Laboratories do not overlook possibilities of traditional evidence, such as DNA, Fingerprints and fibre traces. Good record photography of items which are unlikely to be released by the laboratory is essential. Finally, cross-contamination has in

Radioactivity Monitoring of the Irish Environment 2003-2005

International Nuclear Information System (INIS)

Ryan, R.W.; Dowdall, A; Fegan, M.F.; Hayden, E.; Kelleher, K.; Long, S.; McEvoy, I.; McKittrick, L.; McMahon, C.A.; Murray, M.; Smith, K.; Sequeira, S.; Wong, J.; Pollard, D.

2007-05-01

This report presents the results of the environmental radioactivity monitoring programme carried out by the Radiological Protection Institute of Ireland (RPII) between 2003 and 2005. This programme aims to assess the exposure of the Irish population to anthropogenic radioactivity in the environment, to review the temporal and geographical distribution of contaminating radionuclides and to maintain systems and procedures which would allow a rapid assessment of environmental contamination to be made in the event of a radiological emergency. Radioactivity is present in the environment due to natural processes, the testing of nuclear weapons in the atmosphere, past nuclear accidents such as that at Chernobyl and the routine licensed discharge of radionuclides from nuclear installations. Liquid discharges from the British Nuclear Group reprocessing plant at Sellafield in Cumbria in the North-West of England continue to be the dominant source of anthropogenic radioactivity in the Irish marine environment. The key elements of the monitoring programme implemented by the RPII during the reporting period include; assessment of ambient radioactivity based on measurements of radioactivity in air and external gamma dose rate at permanent monitoring stations located throughout the country; assessment of levels of radioactivity in drinking water; assessment of levels of radioactivity in foodstuffs based on measurements of total diet, milk and miscellaneous ingredients; assessment of levels of radioactivity in the marine environment based on sampling and measurements of seawater, sediment, seaweed, fish and shellfish. The RPII monitored airborne radioactivity at eleven stations located throughout the country. One station is equipped with a high volume sampler, which allows global fallout concentrations to be measured, and one is equipped to detect the presence of the gas krypton-85. Krypton-85 is released into the environment primarily as a result of the reprocessing of nuclear

Mapping the radioactive contamination in urban environments after nuclear emergencies

International Nuclear Information System (INIS)

Kaiser, Jan Christian; Proehl, Gerhard; Woda, Clemens

2008-01-01

Full text: In the event of a nuclear emergency in an urban environment a reliable overview on the radioactive contamination is crucial for decision making. To assess the radiological situation both measurements of the gamma dose or dose rate (GDR) and results from urban dispersion and deposition models are used. Measurements may arrive from various sources like car-borne detectors or man-borne radiation-sensitive materials embedded in cell phones, flash memory devices or RFID chips. The measurements depend strongly on the detector environment. To account for this dependence each signal is multiplied by a location factor, which quantifies the deviation of the recorded signal from the hypothetical signal of a reference surface of infinitely extended lawn. Furthermore, the data originate from geo-referenced points or lines but do not provide full spatial information. We present here two approaches to produce maps of the reference GDR or surface contamination in urban areas, which are implemented in the Inhabited Areas Monitoring Module (IAMM) as part of the European decision support systems RODOS and ARGOS. Immediately after the accident, a few measurements are combined with the predictions of urban models using data assimilation. If enough measurements are available they are regionalised with geo-statistical interpolation algorithms like inverse distance weighting or kriging. Both approaches are demonstrated in hypothetical scenarios based on the explosion of a radioactive dispersion device. (author)

Evaluation of surface contamination due to alpha using large area contamination monitors

International Nuclear Information System (INIS)

Raghavayya, M.

1998-01-01

Radioactive contamination at work places is evaluated routinely using either the swipe sampling technique or a contamination monitor. Commercially available alpha probes used for the purpose are usually circular and have a face diameter of 50 or 100 mm. Square faced probes are also available. A thin aluminized mylar membrane of thickness 0.45 to 0.9 mg.cm -2 is used to screen the phosphor in the alpha probe to protect it from external light. The membrane cuts off more alphas from low energy emitters than from higher energy alpha emitters. Moreover the response of the detector for alphas originating at all points under the detector face is not uniform, especially when the large area alpha monitors are used. These factors can introduce errors as high as 40% into the measurements. This paper aims to quantify these errors and describe a procedure to overcome the limitations. (author)

Research Trends in Emerging Contaminants on the Aquatic Environments of Tanzania

Directory of Open Access Journals (Sweden)

H. Miraji

2016-01-01

Full Text Available The continuity for discovery and production of new chemicals, allied products, and uses has currently resulted into generation of recent form of contaminants known as Emerging Contaminants (ECs. Once in the aquatic environment ECs are carcinogenic and cause other threats to both human’s and animals’ health. Due to their effects this study was aimed at investigating research trends of ECs in Tanzania. Findings revealed that USA and EU countries were leading in ECs researches, little followed by Asia, South Africa, and then Zambia. Only few guidelines from USA-EPA, WHO, Canada, and Australia existed. Neither published guidelines nor regulations for ECs existed in Tanzania; rather only the occurrence of some disinfection by-products and antibiotics was, respectively, reported in Arusha and Dar es Salaam, Tanzania. As these reports had a limited coverage of ECs, henceforth, these findings constitute the first-line reference materials for ECs research in Tanzania which shall be useful for future monitoring and regulation planning.

Research Trends in Emerging Contaminants on the Aquatic Environments of Tanzania

Science.gov (United States)

Miraji, H.; Othman, O. C.; Ngassapa, F. N.; Mureithi, E. W.

2016-01-01

The continuity for discovery and production of new chemicals, allied products, and uses has currently resulted into generation of recent form of contaminants known as Emerging Contaminants (ECs). Once in the aquatic environment ECs are carcinogenic and cause other threats to both human's and animals' health. Due to their effects this study was aimed at investigating research trends of ECs in Tanzania. Findings revealed that USA and EU countries were leading in ECs researches, little followed by Asia, South Africa, and then Zambia. Only few guidelines from USA-EPA, WHO, Canada, and Australia existed. Neither published guidelines nor regulations for ECs existed in Tanzania; rather only the occurrence of some disinfection by-products and antibiotics was, respectively, reported in Arusha and Dar es Salaam, Tanzania. As these reports had a limited coverage of ECs, henceforth, these findings constitute the first-line reference materials for ECs research in Tanzania which shall be useful for future monitoring and regulation planning. PMID:26998381

Monitoring organic contaminants in eggs of glaucous and glaucous-winged gulls (Larus hyperboreus and Larus glaucescens) from Alaska

International Nuclear Information System (INIS)

Vander Pol, Stacy S.; Becker, Paul R.; Ellisor, Michael B.; Moors, Amanda J.; Pugh, Rebecca S.; Roseneau, David G.

2009-01-01

Gull eggs have been used to monitor contaminants in many parts of the world. The Seabird Tissue Archival and Monitoring Project (STAMP) is a long-term program designed to track trends in pollutants in northern marine environments using seabird eggs. Glaucous and glaucous-winged gull (Larus hyperboreus and Larus glaucescens) eggs collected in 2005 from seven Alaskan colonies were analyzed for organic contaminants. Concentrations ranged from below detection limits to 322 ng g -1 wet mass in one egg for 4,4'-DDE and differed among the samples collected in the Gulf of Alaska and Bering and Chukchi Seas. Chick growth and survival rates may be affected by the contaminant levels found in the eggs, but the eggs should be safe for human consumption if they are eaten in small quantities. STAMP plans to continue collecting and banking gull eggs for future real-time and retrospective analyses. - Organic contaminant concentrations in Alaskan gull eggs could possibly be affecting chick growth and survival rates, but the eggs should be safe for humans to eat in small quantities

Considerations of selection suggested for internal contamination monitoring in Cuba

International Nuclear Information System (INIS)

Cruz S, R.; Lopez B, G.; Placeres V, C.; Arado L, J.; Jova S, L.

1996-01-01

A method for calculating effective risk of radionuclide intake and hypothetical annual dose that will receive a person who works with unsealed sources is proposed. Calculated committed dose equivalent and metabolic characteristic of radionuclides permit to select the type of monitoring 'in vivo' and/or 'in vitro'. The method was applied to 396 workers from 28 institutions, where 20 radionuclides in 124 different products for 266 applications are used. From this study 62% of the workers had to be monitored for internal contamination, meanly by 'in vitro' monitoring. In practices of Nuclear Medicine and other medical uses 75% of the workers had to be monitored. These results permitted to corroborate the criteria for internal contamination monitoring program carried out by Center for Hygiene and Radiation Protection and permitted to identify needs for control of radionuclides intakes. (authors).5 refs., 3 figs

Design, construction and monitoring of temporary storage facilities for removed contaminants

International Nuclear Information System (INIS)

Saegusa, Hiromitsu; Funaki, Hironori; Kurikami, Hiroshi; Sakamoto, Yoshiaki; Tokizawa, Takayuki

2013-01-01

Since the Fukushima Daiichi nuclear power plant accident caused by the Tohoku Region Pacific Coast Earthquake on March 11, 2011, decontamination work has been conducted in the surrounding environment within the Fukushima prefecture. Removed contaminants including soil, grass and trees are to be stored safely at temporary storage facilities for up to three years, after which they will be transferred to a planned interim storage facility. The decontamination pilot project was carried out in both the restricted and planned evacuation areas in order to assess decontamination methods and demonstrate measures for radiation protection of workers. Fourteen temporary storage facilities of different technical specifications were designed and constructed under various topographic conditions and land use. In order to support the design, construction and monitoring of temporary storage facilities for removed contaminants during the full-scale decontamination within the prefecture of Fukushima, technical know-how obtained during the decontamination pilot project has been identified and summarized in this paper. (author)

Surveillance for previously unmonitored organic contaminants in the San Francisco Estuary.

Science.gov (United States)

Oros, Daniel R; Jarman, Walter M; Lowe, Theresa; David, Nicole; Lowe, Sarah; Davis, Jay A

2003-09-01

The San Francisco Estuary Regional Monitoring Program initiated surveillance monitoring to identify previously unmonitored synthetic organic contaminants in the San Francisco Estuary. Organic extracts of water samples were analyzed using gas chromatography-mass spectrometry in full scan mode. The major contaminant classes identified in the samples were fire retardants, pesticides, personal care product ingredients, and plasticizers. Evidence from the literature suggests that some of these contaminants can persist in the environment, induce toxicity, and accumulate in marine biota and in higher food chain consumers. The major sources of these contaminants into the marine environment are the discharge of municipal and industrial wastewater effluents, urban stormwater, and agricultural runoff. As a proactive effort, it is suggested that surveillance studies be used routinely in monitoring programs to identify and prevent potential problem contaminants from harming the marine environment.

Belted kingfishers as ecological monitors of contamination: A review

International Nuclear Information System (INIS)

Landrum, C.L.

1993-03-01

Aquatic systems serve as transport pathways and reservoirs for most of the contaminants known to be present on the Oak Ridge Reservation (ORR). Organisms that live in aquatic systems accumulate some of these contaminants from their food and directly from the water or sediment. A wide array of terrestrial organisms feeds on aquatic organisms and may accumulate contaminants from aquatic prey. The belted kingfisher (Ceryle alcyon) is a piscivorous and territorial avian species that may be a suitable monitor of contaminant accumulation at specific sites on the ORR. A kingfisher collected on White Oak Lake in 1991 had a 137 Cs concentration of 568 pCi/g in muscle tissue, which exceeds levels found in any other waterfowl collected from the lake. An investigation into the efficacy of using the kingfisher as an ecological indicator of aquatic contaminants on the ORR was initiated in late August 1992. The primary objective of this study was to acquire information concerning the ecology of the kingfisher to determine how the species could be used within the framework of the Biological Monitoring and Abatement Program at Oak Ridge National Laboratory (ORNL). A second important objective of the study was to examine the possible somatic and reproductive effects of polychlorinated biphenyls (PCBs), Hg, and various radioactive contaminants on piscivorous birds by reviewing pollution ecology studies conducted on those species

Belted kingfishers as ecological monitors of contamination: A review

Energy Technology Data Exchange (ETDEWEB)

Landrum, C.L. [North Texas Univ., Denton, TX (United States). Dept. of Biology; Ashwood, T.L.; Cox, D.K. [Oak Ridge National Lab., TN (United States)

1993-03-01

Aquatic systems serve as transport pathways and reservoirs for most of the contaminants known to be present on the Oak Ridge Reservation (ORR). Organisms that live in aquatic systems accumulate some of these contaminants from their food and directly from the water or sediment. A wide array of terrestrial organisms feeds on aquatic organisms and may accumulate contaminants from aquatic prey. The belted kingfisher (Ceryle alcyon) is a piscivorous and territorial avian species that may be a suitable monitor of contaminant accumulation at specific sites on the ORR. A kingfisher collected on White Oak Lake in 1991 had a {sup 137}Cs concentration of 568 pCi/g in muscle tissue, which exceeds levels found in any other waterfowl collected from the lake. An investigation into the efficacy of using the kingfisher as an ecological indicator of aquatic contaminants on the ORR was initiated in late August 1992. The primary objective of this study was to acquire information concerning the ecology of the kingfisher to determine how the species could be used within the framework of the Biological Monitoring and Abatement Program at Oak Ridge National Laboratory (ORNL). A second important objective of the study was to examine the possible somatic and reproductive effects of polychlorinated biphenyls (PCBs), Hg, and various radioactive contaminants on piscivorous birds by reviewing pollution ecology studies conducted on those species.

GSFC contamination monitors for Space Station

Science.gov (United States)

Carosso, P. A.; Tveekrem, J. L.; Coopersmith, J. D.

1988-01-01

This paper describes the Work Package 3 activities in the area of neutral contamination monitoring for the Space Station. Goddard Space Flight Center's responsibilities include the development of the Attached Payload Accommodations Equipment (APAE), the Polar Orbiting Platform (POP), and the Flight Telerobotic Servicer (FTS). GSFC will also develop the Customer Servicing Facility (CSF) in Phase 2 of the Space Station.

Organization of internal contamination monitoring

International Nuclear Information System (INIS)

Badreddine, A.

1986-07-01

The nuclear energy takes a big part in the world's energy production. The nuclear techniques are used in most fields of life. Nevertheless the use of radioactive materials may cause prejudice to human beings by radiation contamination. The International Commission on Radiological Protection gives the general rules and regulations to avoid this danger. In the publication No. 30, the ICRP gives a metabolic model for the respiratory system and values of Annual Limit of Intake. The ALI for inhalation supposes a standard AMAD (Activity Median Aerodynamic Diameter) of 1 um. We have measured the AMAD in a laboratory under different conditions of functioning in order to show its variation. Then we have analysed the effect of this variation on the internal contamination monitoring. Thus we have calculated the Effective Committed Dose (ECD), the ALI, then the Derived Investigation Level (DIL) for different values of AMAD for Whole-Body Counting (WBC)

Present status of contamination monitoring at the Dalat Nuclear Research Institute (DNRI)

Energy Technology Data Exchange (ETDEWEB)

Nguyen, Hoang Van [Dalat Nuclear Research Inst. (Viet Nam)

1997-06-01

The Dalat nuclear research reactor was renovated and upgraded from the previous TRIGA reactor. In Vietnam, it is a unique nuclear device having suitable neutron flux for the radioisotope production and neutron activation analysis. Soon after the reactor reached its initial criticality in November 1983, a programme has been formed to develop the application of nuclear techniques in various fields. In addition, the use of radioisotopes for diagnostic, therapeutic and other research purposes has been in progress. In order to support these activities, the radiation protection, especially the radiation contamination monitoring has been properly paid attention to. In DNRI, the Radiation Protection Department is responsible for controlling and supervising radiation and working safety for all activities. In this paper, the following items are described on radiation contamination monitoring: controlled area, surface contamination monitoring, and airborne concentration monitoring. (G.K.)

MYCOTOXINS CONTAMINATION IN EDIBLE LAND SNAIL AT GRAZING PADDOCK ENVIRONMENT

Directory of Open Access Journals (Sweden)

Ime Ebenso

2013-02-01

Full Text Available Mycotoxins contamination of animal products is under reported. Juvenile edible land snails (Archachatina marginata were exposed as sentinels in bottomless metal drums for 1 week at abandoned, new and reference sites respectively at grazing paddock environment, to assess the presence of foodborne microbiological mycotoxins contamination during the dry season. Mycological analysis of A. marginata samples revealed high (p<0.05 contamination at all paddocks ranged from 1.2-1.3 x 105 cfu-g. Results revealed values that were found to be unacceptable by FAO/WHO standards. The presence of Aspergillus niger, A. fumigatus and Penicillum expansum were noted as potential toxicogenic mycoflora. Snails were tolerant to all levels of contamination with no clinical signs of infection or mortality. This finding could serve as basis for assessing pre-slaughter microbial contamination of livestock farm/field environment in order to establish data with comparative epidemiological value, which could highlight early warning signals of food safety risk and cross-contamination of mycotoxins in the food chain.

Integrating Modeling and Monitoring to Provide Long-Term Control of Contaminants

International Nuclear Information System (INIS)

Fogwell, Th.

2009-01-01

An introduction is presented of the types of problems that exist for long-term control of radionuclides at DOE sites. A breakdown of the distributions at specific sites is given, together with the associated difficulties. A paradigm for remediation showing the integration of monitoring with modeling is presented. It is based on a feedback system that allows for the monitoring to act as principal sensors in a control system. Currently the establishment of a very prescriptive monitoring program fails to have a mechanism for improving models and improving control of the contaminants. The resulting system can be optimized to improve performance. Optimizing monitoring automatically entails linking the monitoring with modeling. If monitoring designs were required to be more efficient, thus requiring optimization, then the monitoring automatically becomes linked to modeling. Records of decision could be written to accommodate revisions in monitoring as better modeling evolves. The technical pieces of the required paradigm are already available; they just need to be implemented and applied to solve the long-term control of the contaminants. An integration of the various parts of the system is presented. Each part is described, and examples are given. References are given to other projects which bring together similar elements in systems for the control of contaminants. Trends are given for the development of the technical features of a robust system. Examples of monitoring methods for specific sites are given. The examples are used to illustrate how such a system would work. Examples of technology needs are presented. Finally, other examples of integrated modeling-monitoring approaches are presented. (authors)

Contaminated environments in the subsurface and bioremediation: organic contaminants

OpenAIRE

Holliger, Christof; Gaspard, Sarra; Glod, Guy; Heijman, Cornelis; Schumacher, Wolfram; Schwarzenbach, René P.; Vazquez, Francisco

2017-01-01

Due to leakages, spills, improper disposal and accidents during transport, organic compounds have become subsurface contaminants that threaten important drinking water resources. One strategy to remediate such polluted subsurface environments is to make use of the degradative capacity of bacteria. It is often sufficient to supply the subsurface with nutrients such as nitrogen and phosphorus, and aerobic treatments are still dominating. However, anaerobic processes have advantages such as low ...

Proximal spectral sensing to monitor phytoremediation of metal - contaminated soils

NARCIS (Netherlands)

Rathod, P.H.; Rossiter, D.; Noomen, M.; van der Meer, F.D.

2013-01-01

Assessment of soil contamination and its long-term monitoring are necessary to evaluate the effectiveness of phytoremediation systems. Spectral sensing-based monitoring methods promise obvious benefits compared to field-based methods: lower cost, faster data acquisition and better spatio-temporal

Unregulated Contaminant Monitoring Rule 2 (UCMR 2), (2008-2010) Occurrence Data

Data.gov (United States)

U.S. Environmental Protection Agency — The Unregulated Contaminant Monitoring Rule supporting the second cycle (UCMR 2) of monitoring, conducted under EPA oversight, was published in the Federal Register...

Levels and trends of contaminants in humans of the Arctic.

Science.gov (United States)

Gibson, Jennifer; Adlard, Bryan; Olafsdottir, Kristin; Sandanger, Torkjel Manning; Odland, Jon Øyvind

2016-01-01

The Arctic Monitoring and Assessment Programme (AMAP) is one of the six working groups established under the Arctic Council. AMAP is tasked with monitoring the levels of contaminants present in the Arctic environment and people as well as assessing their effects on a continuous basis, and reporting these results regularly. Most of the presented data have been collected over the last 20 years and are from all eight Arctic countries. Levels of contaminants appear to be declining in some of the monitored Arctic populations, but it is not consistent across the Arctic. Most Arctic populations continue to experience elevated levels of these contaminants compared to other populations monitored globally. There are certain contaminants, such as perfluorinated compounds and polybrominated diphenyl ethers, which are still increasing in Arctic populations. These contaminants require more investigation to find out the predominant and important sources of exposure, and whether they are being transported to the Arctic through long-range transport in the environment.

History, contamination and monitoring of water bodies at the P/A Mayak

International Nuclear Information System (INIS)

Drozhko, E.G.; Sharalapov, V.I.; Posokhov, A.K.; Kuzina, N.V.; Postovalova, G.A.

1993-01-01

The facts concerning the history and contamination data of surface water at Mayak Production Association are given in the article. Data about the monitoring of contaminated water are presented. The monitoring program solved three main problems: assessment of the water quality of basins, examination of water quality in accordance with actual specifications, and reception of new data about the migration of the most important radionuclides

Monitor for alpha beta contamination of hands; Moniteur de contamination alpha beta des mains

Energy Technology Data Exchange (ETDEWEB)

Guitton, J

1958-07-01

The following specifications of hands alpha beta contamination monitor are presented: the position of the hands, the detection and separation of alpha and beta, the information processing, the programming, the results presentation and general characteristics. (A.L.B.)

Wireless Sensor Network Based Subsurface Contaminant Plume Monitoring

Science.gov (United States)

2012-04-16

Sensor Network (WSN) to monitor contaminant plume movement in naturally heterogeneous subsurface formations to advance the sensor networking based...time to assess the source and predict future plume behavior. This proof-of-concept research aimed at demonstrating the use of an intelligent Wireless

Reclamation of contaminated urban and rural environments following a severe nuclear accident

International Nuclear Information System (INIS)

Strand, P.; Skuterud, L.

1997-10-01

In the event of a severe nuclear accident releasing radioactive materials to the atmosphere, there is a potential for widespread contamination of both the urban and rural environments. In some instances of environmental contamination, natural processes may eventually reduce or eliminate the problem without man's intervention. The situation with respect to radioactive contamination is no different except that radioactive contamination will also disappear through normal physical radioactive decay. In other cases, man is often able to mitigate potential harmful effects by cleaning, washing, abrading or by the application of chemicals. The actions taken by man to mitigate the potential harmful effects of contamination are described as countermeasures. In the case of radioactive contamination, the objective of countermeasures is to minimise radiation doses to man. This document is intended as a guide to those groups who may, at very short notice, be called upon to manage and reclaim radioactively contaminated urban and rural environments in the Nordic countries. However, much of the information and recommendations are also equally applicable in other countries. The document is divided into eight distinct parts, namely: 1. The Urban Environment; 2. The Cultivated Agricultural Environment; 3. Animals; 4. Forests; 5. Freshwater and Fish; 6. Management and Disposal of Radioactive Waste from Clean-up Operations; 7. Radiation Protection and Safety of Clean-up Operators; 8. Resources Available in Society. (EG)

Reclamation of contaminated urban and rural environments following a severe nuclear accident

Energy Technology Data Exchange (ETDEWEB)

Strand, P; Skuterud, L [eds.; Norwegian Radiation Protection Authority (Norway); Melin, J [ed.; Swedish Radiation Protection Institute (Sweden)

1997-10-01

In the event of a severe nuclear accident releasing radioactive materials to the atmosphere, there is a potential for widespread contamination of both the urban and rural environments. In some instances of environmental contamination, natural processes may eventually reduce or eliminate the problem without man`s intervention. The situation with respect to radioactive contamination is no different except that radioactive contamination will also disappear through normal physical radioactive decay. In other cases, man is often able to mitigate potential harmful effects by cleaning, washing, abrading or by the application of chemicals. The actions taken by man to mitigate the potential harmful effects of contamination are described as countermeasures. In the case of radioactive contamination, the objective of countermeasures is to minimise radiation doses to man. This document is intended as a guide to those groups who may, at very short notice, be called upon to manage and reclaim radioactively contaminated urban and rural environments in the Nordic countries. However, much of the information and recommendations are also equally applicable in other countries. The document is divided into eight distinct parts, namely: 1. The Urban Environment; 2. The Cultivated Agricultural Environment; 3. Animals; 4. Forests; 5. Freshwater and Fish; 6. Management and Disposal of Radioactive Waste from Clean-up Operations; 7. Radiation Protection and Safety of Clean-up Operators; 8. Resources Available in Society. (EG).

Radiation monitoring network in Poland

International Nuclear Information System (INIS)

Grabowski, D.; Kurowski, W.; Muszynski, W.; Rubel, B.; Smagala, G.; Swietochowska, J.

2001-01-01

In Poland the radioactive contamination of the environment and food has been controlled since the early sixties by the Service for Measurements of Radioactive Contamination (SPSP). The service comprises a network of measuring stations and the Centre of Radioactive Contamination Measurements (COPSP). Actually, there are 100 measurement stations. The main task of such station is systematic measurement of radioactivity level in samples of environment components and food. Nine stations of SPSP acting within meteorological stations, ten stations of low level air radioactivity measurements (Aerosols Sampling Stations-500) and eleven permanent monitoring stations (PMS) form the radiation monitoring warning system in Poland. (author)

Retrospective biomonitoring of chemical contamination in the marine coastal environment of Terra Nova Bay (Ross Sea, Antarctica) by environmental specimen banking.

Science.gov (United States)

Grotti, Marco; Pizzini, Sarah; Abelmoschi, Maria Luisa; Cozzi, Giulio; Piazza, Rossano; Soggia, Francesco

2016-12-01

Antarctica offers a good opportunity to investigate planetary-scale pollution and climate change, and provides baseline values for contaminants such as Trace Elements (TEs) and Persistent Organic Pollutants (POPs). Literature data on contaminant levels in the Antarctic environment indicate that long-range atmospheric transport is the primary pathway by which pollutants from surrounding continents are carried to this pristine environment. However, local contamination sources represented by the scientific stations are also not negligible. Climate change and global warming are altering the global budget of anthropogenic contaminants and their monitoring in Antarctica ecosystems is very important to protect the global environment. In this work, eighty specimens of Adamussium colbecki (Smith, 1902), a benthic Antarctic scallop, collected from 1996 to 2009 and stored in the Antarctic Environmental Specimen Bank, were analyzed to quantify TEs and POPs, including polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs) and polycyclic aromatic hydrocarbons (PAHs). Metals concentrations were not affected by anthropogenic contributions, highlighting a natural accumulation with the age of the organism. Similarly, no temporal trend was found for PCNs, PCBs and PAHs. However, specimens collected during the summer 1997-98 showed enhanced concentration levels of PCBs and PAHs that could refer to a local anthropogenic source of contamination. Copyright © 2016 Elsevier Ltd. All rights reserved.

Second IRMF comparison of surface contamination monitor calibrations 2001-2002

CERN Document Server

Scott, C J

2002-01-01

The Ionising Radiations Metrology Forum (IRMF) organised a second comparison of surface contamination monitor calibrations in which twenty establishments in the UK participated. The exercise involved the circulation of three surface contamination monitors for calibration using large area reference sources available in the participants' laboratories. The instruments used were a Mini Instruments EP15, a Berthold LB122 and an Electra ratemeter with DP6AD probe. The instrument responses were calculated by the individual participants and submitted to the for analysis along with details of the reference sources used. Details of the estimated uncertainties were also reported. The results are compared and demonstrate generally satisfactory agreement between the participating establishments.

Contaminated environments in the subsurface and bioremediation: organic contaminants.

Science.gov (United States)

Holliger, C; Gaspard, S; Glod, G; Heijman, C; Schumacher, W; Schwarzenbach, R P; Vazquez, F

1997-07-01

Due to leakages, spills, improper disposal and accidents during transport, organic compounds have become subsurface contaminants that threaten important drinking water resources. One strategy to remediate such polluted subsurface environments is to make use of the degradative capacity of bacteria. It is often sufficient to supply the subsurface with nutrients such as nitrogen and phosphorus, and aerobic treatments are still dominating. However, anaerobic processes have advantages such as low biomass production and good electron acceptor availability, and they are sometimes the only possible solution. This review will focus on three important groups of environmental organic contaminants: hydrocarbons, chlorinated and nitroaromatic compounds. Whereas hydrocarbons are oxidized and completely mineralized under anaerobic conditions in the presence of electron acceptors such as nitrate, iron, sulfate and carbon dioxide, chlorinated and nitroaromatic compounds are reductively transformed. For the aerobic often persistent polychlorinated compounds, reductive dechlorination leads to harmless products or to compounds that are aerobically degradable. The nitroaromatic compounds are first reductively transformed to the corresponding amines and can subsequently be bound to the humic fraction in an aerobic process. Such new findings and developments give hope that in the near future contaminated aquifers can efficiently be remediated, a prerequisite for a sustainable use of the precious-subsurface drinking water resources.

Improvement of a device for monitoring the contamination of surfaces

International Nuclear Information System (INIS)

Barbier, Albert.

1981-01-01

The purpose of this invention is to make it possible to monitor the contamination of surfaces by a light weight portable device and enabling the alpha, beta and gamma radiation contamination to be detected. The detection probe which is connected by a single lead to the box is adapted, in each particular case, to the radiation mode emitted by the contaminated surfaces and the box is provided with a special leak-proof socket for connecting the probe and includes means for assessing the counting rate of the radiation given off, depending on the mode of the radiations emitted by the contaminated surfaces and the intensity of the count rate [fr

Environment quality monitoring using ARM processor

Science.gov (United States)

Vinaya, C. H.; Krishna Thanikanti, Vamsi; Ramasamy, Sudha

2017-11-01

This paper of air quality monitoring system describes a model of sensors network to continuously monitoring the environment with low cost developed model. At present time all over the world turned into a great revolution in industrial domain and on the other hand environment get polluting in a dangerous value. There are so many technologies present to reduce the polluting contents but still there is no completely reduction of that pollution. Even there are different methods to monitor the pollution content; these are much costly that not everyone can adapt those methods or devices. Now we are proposing a sensors connected network to monitor the environment continuously and displaying the pollutant gases percentage in air surroundings and can transmit the results to our mobiles by message. The advantage of this system is easy to design, establish at area to monitor, maintenance and most cost effective as well.

ESI nuclear model 271 C contamination monitor

International Nuclear Information System (INIS)

Burgess, P.H.; Iles, W.J.

1978-06-01

This instrument is a general purpose contamination monitor, comprising a GM tube connected by a coiled extensible cable to a ratemeter. The scale is marked quasi-logarithmically from 0 to 600 in 'counts per second'. The report falls under the headings: general description, facilities and controls, radiation performance, electrical characteristics, environmental characteristics, mechanical characteristics, summary of performance, conclusions. (U.K.)

Demolition and removal of radioactively contaminated concrete soil: Aerosol control and monitoring

Energy Technology Data Exchange (ETDEWEB)

Newton, G.J.; Hoover, M.D.; Grace, A.C. III

1995-12-01

From 1963 to 1985, two concrete-lined ponds were used to reduce the volume of radioactive liquids from the Institute`s research programs. Following withdrawal of the {open_quotes}hot ponds{close_quotes} from active use, the residual sludges and plastic liners of the ponds were removed and shipped to a radioactive waste disposal site. From 1987 to 1994, the concrete structures remained undisturbed pending environmental restoration on the site. Restoration began in 1994 and was completed in 1995. Restoration involved mechanical breakup and removal of the concrete structures and removal of areas of contaminated soils from the site. This report describes the design and results of the aerosol control and monitoring program that was conducted to ensure protection of workers and the environment during the restoration process. The aerosol control and monitoring strategy developed for remediation of the ITRI hot ponds was successful both in preventing dispersion of radioactive dusts and in demonstrating that exposures of workers and offsite releases were within statutory limits.

Contamination of living environment and human organism with plutonium

International Nuclear Information System (INIS)

Benes, J.

1981-01-01

The applicability of 239 Pu in nuclear power is discussed. The radiotoxic properties of plutonium, its tissue distribution and the effects of internal and external contamination are described. The contamination of the atmosphere, water, and soil with plutonium isotopes is discussed. Dosimetry is described of plutonium in the living and working environments as is plutonium determination in the human organism. (H.S.)

Radioactivity Monitoring of the Irish Environment 2010-2011

International Nuclear Information System (INIS)

McGinnity, P.; Currivan, L.; Dowdall, A.; Hanley, O.; Kelleher, K.; McKittrick, L.; Pollard, D.; Somerville, S.; Wong, J.; McMahon, C.

2012-11-01

This report presents the results of the environmental radioactivity monitoring programme carried out by the Radiological Protection Institute of Ireland RPII during 2010 and 2011. The RPII has routinely monitored levels of radioactivity in the Irish environment since 1982 and this is the latest in the RPII's series of environmental monitoring reports. The RPII reviews and updates its environmental programme annually to ensure it remains relevant and continues to focus on the most important sources of radioactivity in the environment. The data presented in this report confirm that while the levels of artificial radioactivity in the Irish environment are detectable, they are low. They do not pose a significant risk to the human health of the Irish population. Trace amounts of radioactive isotopes consistent with the Fukushima nuclear accident were detected in air, rainwater and milk samples during the period March to May 2011. These increases in levels of radioactivity were not of concern from a public health point of view. For the remainder of the reporting period, activity concentrations of radionuclides in airborne particles were low and consistent with measurements made in recent years. Radioactivity levels in milk, mixed diet and a wide range of foodstuffs were low and, for the majority of samples, below the detection limits. All drinking waters tested were found to be in compliance with the total indicative dose defined in national and EU legislation. The doses incurred by the Irish public in 2010 and 2011 as a result of artificial radioactivity in the marine environment are small when compared to dose limits or to natural radiation doses received by the Irish public. The doses to the most exposed individuals, members of the oyster and mussel farmers critical group, were approximately 0.02 per cent and 0.05 per cent of the annual dose limit of 1000 microsieverts for members of the public from practices involving controllable sources of radiation in 2010 and

Radioactivity monitoring of the Irish marine environment 1985-86

International Nuclear Information System (INIS)

Cunningham, J.D.; O'Grady, J.; Rush, T.

1988-01-01

This report presents the results of the monitoring programme for the two-year period from January 1985 to December 1986. Information on the radioactive contamination of the marine environment is obtained from the analysis of environmental samples taken at a number of locations along the coastline and various sampling stations in the western Irish Sea. These usually include samples of surface seawater, sediment, seaweed, fish and shellfish. Estimates are presented of the individual and collective doses received by the Irish public from the consumption of fish and shellfish during the period 1985-1986. These doses are assessed in terms of the system of dose limitation recommended by the International Commission on Radiological Protection and embodied in the Basic Safety Standards Directive of the European Community

Monitoring of Radionuclide Contamination in Food Samples in Malaysia due to Daiichi Reactor Accident in Fukushima, Japan

International Nuclear Information System (INIS)

Nurrul Assyikeen Mohd Jaffary; Wo, Y.M.; Abdul Kadir Ishak

2015-01-01

On March 11, 2011, a serious accident occurred in Daiichi nuclear reactor plant, Fukushima, Japan which caused radioactive materials been released into the atmosphere in the form of aerosols and dust particles. Sea water around the plant was also found contaminated with high radioactivity readings. These radioactive materials could be transported by the winds and ocean current across international borders and cannot be controlled by human. Thus, a continuous monitoring activity of radionuclide content in the air and sea water needs to be conducted by the authorities. In addition to radioactivity monitoring, Malaysia should also control the entry of contaminated food in order to prevent radionuclide ingestion by human. The radionuclide 131 I, 134 Cs and 137 Cs were used as a measure of pollution levels and counted with gamma spectrometry using standard analysis method suggested by AOAC International. In this paper, details description of the role of Radiochemical and Environment Group, Nuclear Malaysia who is responsible in analyzing the radioactivity in the food samples due to Fukushima Daiichi, Japan accident was included. The radioactivity limit adopted and analysis results from this monitoring were discussed. (author)

Evaluating legacy contaminants and emerging chemicals in marine environments using adverse outcome pathways and biological effects-directed analysis.

Science.gov (United States)

Hutchinson, Thomas H; Lyons, Brett P; Thain, John E; Law, Robin J

2013-09-30

Natural and synthetic chemicals are essential to our daily lives, food supplies, health care, industries and safe sanitation. At the same time protecting marine ecosystems and seafood resources from the adverse effects of chemical contaminants remains an important issue. Since the 1970s, monitoring of persistent, bioaccumulative and toxic (PBT) chemicals using analytical chemistry has provided important spatial and temporal trend data in three important contexts; relating to human health protection from seafood contamination, addressing threats to marine top predators and finally providing essential evidence to better protect the biodiversity of commercial and non-commercial marine species. A number of regional conventions have led to controls on certain PBT chemicals over several years (termed 'legacy contaminants'; e.g. cadmium, lindane, polycyclic aromatic hydrocarbons [PAHs] and polychlorinated biphenyls [PCBs]). Analytical chemistry plays a key role in evaluating to what extent such regulatory steps have been effective in leading to reduced emissions of these legacy contaminants into marine environments. In parallel, the application of biomarkers (e.g. DNA adducts, CYP1A-EROD, vitellogenin) and bioassays integrated with analytical chemistry has strengthened the evidence base to support an ecosystem approach to manage marine pollution problems. In recent years, however,the increased sensitivity of analytical chemistry, toxicity alerts and wider environmental awareness has led to a focus on emerging chemical contaminants (defined as chemicals that have been detected in the environment, but which are currently not included in regulatory monitoring programmes and whose fate and biological impacts are poorly understood). It is also known that natural chemicals (e.g. algal biotoxins) may also pose a threat to marine species and seafood quality. Hence complex mixtures of legacy contaminants, emerging chemicals and natural biotoxins in marine ecosystems represent

Subsurface Contaminant Focus Area: Monitored Natural Attenuation (MNA)--Programmatic, Technical, and Regulatory Issues

Energy Technology Data Exchange (ETDEWEB)

Krupka, Kenneth M.; Martin, Wayne J.

2001-07-23

Natural attenuation processes are commonly used for remediation of contaminated sites. A variety of natural processes occur without human intervention at all sites to varying rates and degrees of effectiveness to attenuate (decrease) the mass, toxicity, mobility, volume, or concentration of organic and inorganic contaminants in soil, groundwater, and surface water systems. The objective of this review is to identify potential technical investments to be incorporated in the Subsurface Contaminant Focus Area Strategic Plan for monitored natural attenuation. When implemented, the technical investments will help evaluate and implement monitored natural attenuation as a remediation option at DOE sites. The outcome of this review is a set of conclusions and general recommendations regarding research needs, programmatic guidance, and stakeholder issues pertaining to monitored natural attenuation for the DOE complex.

Extensive severe fever with thrombocytopenia syndrome virus contamination in surrounding environment in patient rooms.

Science.gov (United States)

Ryu, B-H; Kim, J Y; Kim, T; Kim, M-C; Kim, M J; Chong, Y-P; Lee, S-O; Choi, S-H; Kim, Y S; Woo, J H; Kim, S-H

2018-01-31

Severe fever with thrombocytopenia syndrome (SFTS) is an emerging tick-borne disease in Korea and China. Although there is previous evidence of person-to-person transmission via direct contact with body fluids, the role of environmental contamination by SFTS virus (SFTSV) in healthcare settings has not been established. We therefore investigated the contamination of the healthcare environment by SFTSV. We investigated the possible contamination of hospital air and surfaces with SFTSV transmission by collecting air and swabbing environmental surface samples in two hospitals treating six SFTS patients between March and September 2017. The samples were tested using real-time RT-PCR for SFTS M and S segments. Of the six SFTS patients, four received mechanical ventilation and three died. Five rooms were occupied by those using mechanical ventilation or total plasma exchange therapy in isolation rooms without negative pressure and one room was occupied by a patient bedridden due to SFTS. SFTSV was detected in 14 (21%) of 67 swab samples. Five of 24 swab samples were obtained from fomites including stethoscopes, and 9 of 43 were obtained from fixed structures including doorknobs and bed guardrails. Some samples from fixed structures such as television monitors and sink tables were obtained in areas remote from the patients. SFTSV RNA was not detected in five air samples from three patients' rooms. Our data suggest that SFTSV contamination was extensive in surrounding environments in SFTS patients' rooms. Therefore, more strict isolation methods and disinfecting procedures should be considered when managing SFTS patients. Copyright © 2018 European Society of Clinical Microbiology and Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

Contamination Control and Monitoring of Tap Water as Fluid in Industrial Tap Water Hydraulic Systems

DEFF Research Database (Denmark)

Conrad, Finn; Adelstorp, Anders

1998-01-01

Presentation of results and methods addressed to contamination control and monitoring of tap water as fluid in tap water hydraulic systems.......Presentation of results and methods addressed to contamination control and monitoring of tap water as fluid in tap water hydraulic systems....

Determination of contamination operational value by routine monitoring in research laboratories

International Nuclear Information System (INIS)

Salomao, Edeilson; Medeiros, Regina Bitelli; Mattos, Maria Fernanda S.S.; Daros, Kellen Adriana Curci

2008-01-01

The radioisotopes have a large spectrum of applicability in many areas of science, as in medicine, agriculture and industry in general. In the biological area, the radioisotopes have brought many benefits to study physiological processes in living organisms and in vitro. The most radioisotopes used in biological research are emitters of radiation of low energy, mainly β, and are used as unsealed sources. The manipulation of these radioisotopes generates radioactive wastes and eventually can cause contamination in the areas of handling or even occasionally in areas to which access is not controlled. According to CNEN-NE-3.02 standard is necessary and mandatory the exposure and contamination levels control in the areas of handling of unsealed sources. The goal of the work is to establish how often the monitoring should be done through the survey of the contamination and exposure levels, in areas designed to manipulate 32 P and how this monitoring can contribute to the improvement the conditions of radiological protection. From the twenty eight research laboratories registered by 'Nucleo de Protecao Radiologica' (NPR) were selected four where the activities are not restrict to 32 P biological assays. The levels of contamination and exposure were evaluated using monitors GM and the layout of laboratories containing the points to be tracker defined based on the researchers' routine. At each point three values were obtained to measure the rate of contamination on the surface and exposure rate. The measures were made twice a week before and after the radioisotope manipulation. Based on these data was possible to establish the range from 0,306 to 0,678 Bq.cm -2 as operational average level to the superficial contamination. The average exposure rate measured was 5.16 n C/Kg.h. The results were important to demonstrating to researchers how they can contribute to the improvement of radiological protection conditions. (author)

Monitoring bacterial faecal contamination in waters using multiplex ...

African Journals Online (AJOL)

Monitoring of sanitary quality or faecal pollution in water is currently based on quantifying some bacterial indicators such as Escherichia coli and faecal enterococci. Using a multiplex real-time PCR assay for faecal enterococci and Bacteroides spp., the detection of faecal contamination in non-treated water can be done in a ...

Radioactive sources and contaminated materials in scrap: monitoring, detection and remedial actions

International Nuclear Information System (INIS)

Gallini, R.; Berna, V.; Bonora, A.; Santini, M.

1999-01-01

The scrap recycling in steel and other metal mills represents one of the most relevant activities in the Province of Brescia (Lombardy, Italy). In our Province more than 20 million tonnes of metal scrap are recycled every year by a melting process. Since 1990, many accidents which took place were caused by the unwanted melting of radioactive sources, that were probably hidden in metal scrap. In 1993, the Italian Government stated directives to monitor metal scrap imported from non-EC countries because of the suspicion of the illegal traffic of radioactive materials. In 1996, a law imposed the control of all metal scrap, regardless of their origins. Since 1993, our staff have controlled thousands of railway wagons and trucks. Approximately a hundred steel mills and foundries of aluminium, cooper, brass, etc. have also been controlled and many samples have been collected (flue dust, slag, finished products). During these controls, contaminated areas have been brought to light in two warehouses (Cs 137), in 6 companies (Cs 137 and Am 241), in two landfills of industrial waste (Cs 137) and in a quarry (Cs 137). Up to now the contaminated areas have been cleaned, except for the last one. About 150 radioactive sources on contaminated materials have been found in metal scrap. We found radioactive sources of Co 60, Ra 226, Ir 192, Kr 85, Am 241, while the contamination of metals was mainly due to Ra 226. The situation described above justifies an accurate control of the amount of scrap to reduce the risk of contamination of the workers in the working areas, in the environment and in the general public. (author)

Mobile means for the monitoring of atmospheric contamination in a reactor building

International Nuclear Information System (INIS)

Marques, S.; Lestang, M.

2009-01-01

After having evoked the context and challenges of contamination monitoring when exploiting nuclear reactors, the authors discuss the representativeness of the atmospheric contamination measurement as it depends on the different physicochemical forms of radionuclides present in the circuits. They indicate the different gaseous or aerosol radioactive elements which are monitored within EDF installations. They discuss the incorporation of monitoring means at the installation design level, briefly present the use of beacons inside and outside the reactor building. They describe how monitoring is organized on the basis of alert threshold adjustments: an investigation threshold and an evacuation threshold. They discuss the beacon (or sensor) selection and indicate recommendations for their implementation for optimization purposes. They indicate where these beacons are installed and evoke the experimentation of networked mobile beacons with data remote transmission

Development of a calibration system for surface contamination monitors

International Nuclear Information System (INIS)

Marechal, M.H.H.; Barbosa, M.P.

1992-01-01

A calibration system for surface contamination monitors is developed, aiming supply the existence demand of these instruments. A experimental arrangement and a methodology are described. The advantages of use this system for calibration routine optimization are also discussed. (C.G.C.)

Federal Radiological Monitoring and Assessment Center Monitoring Manual Volume 1, Operations

Energy Technology Data Exchange (ETDEWEB)

NSTec Aerial Measurement Systems

2012-07-31

The Monitoring division is primarily responsible for the coordination and direction of: Aerial measurements to delineate the footprint of radioactive contaminants that have been released into the environment. Monitoring of radiation levels in the environment; Sampling to determine the extent of contaminant deposition in soil, water, air and on vegetation; Preliminary field analyses to quantify soil concentrations or depositions; and Environmental and personal dosimetry for FRMAC field personnel, during a Consequence Management Response Team (CMRT) and Federal Radiological Monitoring and Assessment Center (FRMAC) response. Monitoring and sampling techniques used during CM/FRMAC operations are specifically selected for use during radiological emergencies where large numbers of measurements and samples must be acquired, analyzed, and interpreted in the shortest amount of time possible. In addition, techniques and procedures are flexible so that they can be used during a variety of different scenarios; e.g., accidents involving releases from nuclear reactors, contamination by nuclear waste, nuclear weapon accidents, space vehicle reentries, or contamination from a radiological dispersal device. The Monitoring division also provides technicians to support specific Health and Safety Division activities including: The operation of the Hotline; FRMAC facility surveys; Assistance with Health and Safety at Check Points; and Assistance at population assembly areas which require support from the FRMAC. This volume covers deployment activities, initial FRMAC activities, development and implementation of the monitoring and assessment plan, the briefing of field teams, and the transfer of FRMAC to the EPA.

Radioactive contamination in environment and food in Poland in 1992

International Nuclear Information System (INIS)

Grabowski, D.; Muszynski, W.; Petrykowska, M.; Rubel, B.; Smagala, G.; Wilgos, J.

1993-01-01

The level analysis of the level of radioactive contamination in environment and food samples was carried out in Poland in 1992. The results were compared to the data from 1985-1991 period. Since the Chernobyl accident gradual decrease of contamination level has been stated. The gamma dose rate and the contamination of air, fallout, tap and surface water were at the level of 1985. Still higher contamination level of cesium isotopes in soil has been reported and as a consequence food contamination was higher particularly the animal food. Actually, the source of additional dose is ingestion of artificial isotopes with food as a result of food contamination. The average effective dose equivalent, due to the contaminated food consumption, was estimated at the level 15 μSv for a Pole in 1992. (author). 13 refs, 6 figs, 20 tabs

Micro GC's for Contaminant Monitoring in Spacecraft Air, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The objective of this proposal is to create new gas chromatographs (GCs) for contaminant monitoring in spacecraft air that do not require any reagents or special...

Shuttle on-orbit contamination and environmental effects

Science.gov (United States)

Leger, L. J.; Jacobs, S.; Ehlers, H. K. F.; Miller, E.

1985-01-01

Ensuring the compatibility of the space shuttle system with payloads and payload measurements is discussed. An extensive set of quantitative requirements and goals was developed and implemented by the space shuttle program management. The performance of the Shuttle system as measured by these requirements and goals was assessed partly through the use of the induced environment contamination monitor on Shuttle flights 2, 3, and 4. Contamination levels are low and generally within the requirements and goals established. Additional data from near-term payloads and already planned contamination measurements will complete the environment definition and allow for the development of contamination avoidance procedures as necessary for any payload.

Induced Environment Contamination Monitor (IECM), air sampler - Results from the Space Transport System (STS-2) flight

Science.gov (United States)

Peters, P. N.; Hester, H. B.; Bertsch, W.; Mayfield, H.; Zatko, D.

1983-01-01

An investigation involving sampling the rapidly changing environment of the Shuttle cargo bay is considered. Four time-integrated samples and one rapid acquisition sample were collected to determine the types and quantities of contaminants present during ascent and descent of the Shuttle. The sampling times for the various bottles were controlled by valves operated by the Data Acquisition and Control System (DACS) of the IECM. Many of the observed species were found to be common solvents used in cleaning surfaces. When the actual volume sampled is taken into account, the relative mass of organics sampled during descent is about 20 percent less than during ascent.

Environmental monitoring of Columbia River sediments: Grain-size distribution and contaminant association

Energy Technology Data Exchange (ETDEWEB)

Blanton, M.L.; Gardiner, W.W.; Dirkes, R.L.

1995-04-01

Based on the results of this study and literature review, the following conclusions can be made: Sediment grain size and TOC (total organic carbon) influence contaminant fate and transport (in general, sediments with higher TOC content and finer grain-size distribution can have higher contaminant burdens than sediments from a given river section that have less TOC and greater amounts of coarse-grained sediments). Physiochemical sediment characteristics are highly variable among monitoring sites along the Columbia River. Sediment grain characterization and TOC analysis should be included in interpretations of sediment-monitoring data.

Environmental monitoring of Columbia River sediments: Grain-size distribution and contaminant association

International Nuclear Information System (INIS)

Blanton, M.L.; Gardiner, W.W.; Dirkes, R.L.

1995-04-01

Based on the results of this study and literature review, the following conclusions can be made: Sediment grain size and TOC (total organic carbon) influence contaminant fate and transport (in general, sediments with higher TOC content and finer grain-size distribution can have higher contaminant burdens than sediments from a given river section that have less TOC and greater amounts of coarse-grained sediments). Physiochemical sediment characteristics are highly variable among monitoring sites along the Columbia River. Sediment grain characterization and TOC analysis should be included in interpretations of sediment-monitoring data

Sediment and contaminant transport in a marine environment

International Nuclear Information System (INIS)

Onishi, Y.; Thompson, F.L.

1986-01-01

The finite-element model FETRA is an unsteady, verically averaged two-dimensional model to simulate the transport of sediment and contaminants (radionuclides, heavy metals, pesticides, etc.) in coastal and estuarine water. The model, together with the hydrodynamic model CAFE-I, was applied to the Irish Sea to predict the migration and accumulation of sediment (both cohesive and noncohesive) and of a radionuclide (dissolved and sediment-sorbed) in a tide- and wind-driven system. The study demonstrated that FETRA is a useful tool for assessing sediment and toxic contaminant transport in a marine environment

Detection, Occurrence and Fate of Emerging Contaminants in Agricultural Environments

Science.gov (United States)

Cassada, David A.; Bartelt–Hunt, Shannon L.; Li, Xu; D’Alessio, Matteo; Zhang, Yun; Zhang, Yuping; Sallach, J. Brett

2018-01-01

A total of 59 papers published in 2015 were reviewed ranging from detailed descriptions of analytical methods, to fate and occurrence studies, to ecological effects and sampling techniques for a wide variety of emerging contaminants likely to occur in agricultural environments. New methods and studies on veterinary pharmaceuticals, steroids, antibiotic resistance genes in agricultural environments continue to expand our knowledge base on the occurrence and potential impacts of these compounds. This review is divided into the following sections: Introduction, Analytical Methods, Steroid Hormones, Pharmaceutical Contaminants, Transformation Products, and “Antibiotic Resistance, Drugs, Bugs and Genes”. PMID:27620078

Evaluating legacy contaminants and emerging chemicals in marine environments using adverse outcome pathways and biological effects-directed analysis

International Nuclear Information System (INIS)

Hutchinson, Thomas H.; Lyons, Brett P.; Thain, John E.; Law, Robin J.

2013-01-01

Natural and synthetic chemicals are essential to our daily lives, food supplies, health care, industries and safe sanitation. At the same time protecting marine ecosystems and seafood resources from the adverse effects of chemical contaminants remains an important issue. Since the 1970s, monitoring of persistent, bioaccumulative and toxic (PBT) chemicals using analytical chemistry has provided important spatial and temporal trend data in three important contexts; relating to human health protection from seafood contamination, addressing threats to marine top predators and finally providing essential evidence to better protect the biodiversity of commercial and non-commercial marine species. A number of regional conventions have led to controls on certain PBT chemicals over several years (termed ‘legacy contaminants’; e.g. cadmium, lindane, polycyclic aromatic hydrocarbons [PAHs] and polychlorinated biphenyls [PCBs]). Analytical chemistry plays a key role in evaluating to what extent such regulatory steps have been effective in leading to reduced emissions of these legacy contaminants into marine environments. In parallel, the application of biomarkers (e.g. DNA adducts, CYP1A-EROD, vitellogenin) and bioassays integrated with analytical chemistry has strengthened the evidence base to support an ecosystem approach to manage marine pollution problems. In recent years, however, the increased sensitivity of analytical chemistry, toxicity alerts and wider environmental awareness has led to a focus on emerging chemical contaminants (defined as chemicals that have been detected in the environment, but which are currently not included in regulatory monitoring programmes and whose fate and biological impacts are poorly understood). It is also known that natural chemicals (e.g. algal biotoxins) may also pose a threat to marine species and seafood quality. Hence complex mixtures of legacy contaminants, emerging chemicals and natural biotoxins in marine ecosystems represent

A portable contamination monitor with a numerical display

International Nuclear Information System (INIS)

Jones, A.R.

1980-10-01

A portable contamination monitor, its performance and application are described. The monitor is equipped with two 15.5 cm 2 'pancake' type Geiger-Mueller counters with thin windows ( 2 ). The summed counting rate is displayed in the range 0.2000 counts/s on a liquid crystal digital voltmeter. Every tenth pulse is signaled by flashing an LED and emitting a short (0.1 s) pulse of sound. The efficiencies for detecting a variety of α-, β- and γ- emitters have been measured and are reported. Data on the effects of varying battery voltage and temperature are also reported. (auth)

Strategies for monitoring the emerging polar organic contaminants in water with emphasis on integrative passive sampling.

Science.gov (United States)

Söderström, Hanna; Lindberg, Richard H; Fick, Jerker

2009-01-16

Although polar organic contaminants (POCs) such as pharmaceuticals are considered as some of today's most emerging contaminants few of them are regulated or included in on-going monitoring programs. However, the growing concern among the public and researchers together with the new legislature within the European Union, the registration, evaluation and authorisation of chemicals (REACH) system will increase the future need of simple, low cost strategies for monitoring and risk assessment of POCs in aquatic environments. In this article, we overview the advantages and shortcomings of traditional and novel sampling techniques available for monitoring the emerging POCs in water. The benefits and drawbacks of using active and biological sampling were discussed and the principles of organic passive samplers (PS) presented. A detailed overview of type of polar organic PS available, and their classes of target compounds and field of applications were given, and the considerations involved in using them such as environmental effects and quality control were discussed. The usefulness of biological sampling of POCs in water was found to be limited. Polar organic PS was considered to be the only available, but nevertheless, an efficient alternative to active water sampling due to its simplicity, low cost, no need of power supply or maintenance, and the ability of collecting time-integrative samples with one sample collection. However, the polar organic PS need to be further developed before they can be used as standard in water quality monitoring programs.

HFS-II hands and feet contamination monitor for α, β

International Nuclear Information System (INIS)

Du Xiangyang; Han Shuping; Wang Xiaodong; Fan Liya; Zhang Yong; Rao Xianming; Fang Jintu

1999-11-01

HFS-II Hands and Feet Contamination Monitor for α, β is a necessary device which monitors the entrance of controlling area of nuclear power plant and nuclear facility, and it consists of nuclear detector, nuclear electronic circuit, computer data processing and controlling divisions, input/output controlling etc. Physical indicators conform to the requirements of relative national standard GB8703-87 and department standard EJ/T586

The Development of a Sub-Surface Monitoring System for Organic Contamination in Soils and Groundwater

Directory of Open Access Journals (Sweden)

Sharon L. Huntley

2002-01-01

Full Text Available A major problem when dealing with environmental contamination is the early detection and subsequent surveillance of the contamination. This paper describes the potential of sub-surface sensor technology for the early detection of organic contaminants in contaminated soils, sediments, and landfill sites. Rugged, low-power hydrocarbon sensors have been developed, along with a data-logging system, for the early detection of phase hydrocarbons in soil. Through laboratory-based evaluation, the ability of this system to monitor organic contamination in water-based systems is being evaluated. When used in conjunction with specific immunoassays, this can provide a sensitive and low-cost solution for long-term monitoring and analysis, applicable to a wide range of field applications.

Monitoring of Radionuclide Contamination in Food Samples in Malaysia due to Daiichi Reactor Accident in Fukushima, Japan

International Nuclear Information System (INIS)

Nurrul Assyikeen Mohd Jaffary; Abdul Kadir Ishak; Wo, Y.M.

2011-01-01

On March 11, 2011, a serious accident occurred in Daiichi nuclear reactor plant, Fukushima, Japan which caused radioactive materials been released into the atmosphere in the form of aerosols and dust particles. Sea water around the plant was also found contaminated with high radioactivity readings. These radioactive materials could be transported by the winds and ocean current across international borders and cannot be controlled by human. Besides a continuous monitoring activity of radionuclide content in the air and sea water that need to be conducted by the authorities, Malaysia should also control the entry of radionuclide through contaminated food ingestion by human. Radionuclide I-131, Cs-134 and Cs-137 were used as a counter-measure of pollution levels and counted with gamma spectrometry using standard analysis method suggested by AOAC International. In this paper, details description of the role of Radiochemical and Environment Group, Nuclear Malaysia who's responsible in analyzing the radioactivity in the food samples due to Fukushima Daiichi, Japan accident was included. Also discussed are the radioactivity limit adopted and analysis results from this monitoring. (author)

Marine outfalls monitoring at the CSIR: Evaluating the impact of wastewater discharge on our marine environment

CSIR Research Space (South Africa)

Arabi, S

2012-10-01

Full Text Available is used in coastal cities throughout the world and, if correctly managed, is recognised as an acceptable disposal option from multiple perspectives, including human and environmental health, social acceptability, and economic prudence. However..., wastewater contains contaminants that can affect the ecological functioning of the marine environment and compromise human health. The impact of wastewater discharge therefore requires careful monitoring. The CSIR uses a wide suite of indicators...

[Research on hyperspectral remote sensing in monitoring snow contamination concentration].

Science.gov (United States)

Tang, Xu-guang; Liu, Dian-wei; Zhang, Bai; Du, Jia; Lei, Xiao-chun; Zeng, Li-hong; Wang, Yuan-dong; Song, Kai-shan

2011-05-01

Contaminants in the snow can be used to reflect regional and global environmental pollution caused by human activities. However, so far, the research on space-time monitoring of snow contamination concentration for a wide range or areas difficult for human to reach is very scarce. In the present paper, based on the simulated atmospheric deposition experiments, the spectroscopy technique method was applied to analyze the effect of different contamination concentration on the snow reflectance spectra. Then an evaluation of snow contamination concentration (SCC) retrieval methods was conducted using characteristic index method (SDI), principal component analysis (PCA), BP neural network and RBF neural network method, and the estimate effects of four methods were compared. The results showed that the neural network model combined with hyperspectral remote sensing data could estimate the SCC well.

Application of effective variance method for contamination monitor calibration

International Nuclear Information System (INIS)

Goncalez, O.L.; Freitas, I.S.M. de.

1990-01-01

In this report, the calibration of a thin window Geiger-Muller type monitor for alpha superficial contamination is presented. The calibration curve is obtained by the method of the least-squares fitting with effective variance. The method and the approach for the calculation are briefly discussed. (author)

Position-sensitive radiation monitoring (surface contamination monitor). Innovative technology summary report

International Nuclear Information System (INIS)

1999-06-01

The Shonka Research Associates, Inc. Position-Sensitive Radiation Monitor both detects surface radiation and prepares electronic survey map/survey report of surveyed area automatically. The electronically recorded map can be downloaded to a personal computer for review and a map/report can be generated for inclusion in work packages. Switching from beta-gamma detection to alpha detection is relatively simple and entails moving a switch position to alpha and adjusting the voltage level to an alpha detection level. No field calibration is required when switching from beta-gamma to alpha detection. The system can be used for free-release surveys because it meets the federal detection level sensitivity limits requires for surface survey instrumentation. This technology is superior to traditionally-used floor contamination monitor (FCM) and hand-held survey instrumentation because it can precisely register locations of radioactivity and accurately correlate contamination levels to specific locations. Additionally, it can collect and store continuous radiological data in database format, which can be used to produce real-time imagery as well as automated graphics of survey data. Its flexible design can accommodate a variety of detectors. The cost of the innovative technology is 13% to 57% lower than traditional methods. This technology is suited for radiological surveys of flat surfaces at US Department of Energy (DOE) nuclear facility decontamination and decommissioning (D and D) sites or similar public or commercial sites

Position-sensitive radiation monitoring (surface contamination monitor). Innovative technology summary report

Energy Technology Data Exchange (ETDEWEB)

1999-06-01

The Shonka Research Associates, Inc. Position-Sensitive Radiation Monitor both detects surface radiation and prepares electronic survey map/survey report of surveyed area automatically. The electronically recorded map can be downloaded to a personal computer for review and a map/report can be generated for inclusion in work packages. Switching from beta-gamma detection to alpha detection is relatively simple and entails moving a switch position to alpha and adjusting the voltage level to an alpha detection level. No field calibration is required when switching from beta-gamma to alpha detection. The system can be used for free-release surveys because it meets the federal detection level sensitivity limits requires for surface survey instrumentation. This technology is superior to traditionally-used floor contamination monitor (FCM) and hand-held survey instrumentation because it can precisely register locations of radioactivity and accurately correlate contamination levels to specific locations. Additionally, it can collect and store continuous radiological data in database format, which can be used to produce real-time imagery as well as automated graphics of survey data. Its flexible design can accommodate a variety of detectors. The cost of the innovative technology is 13% to 57% lower than traditional methods. This technology is suited for radiological surveys of flat surfaces at US Department of Energy (DOE) nuclear facility decontamination and decommissioning (D and D) sites or similar public or commercial sites.

Protection of environmental contamination by radioactive materials and remediation of environment

International Nuclear Information System (INIS)

2003-05-01

This report consisted of the environmental contamination of radioactive and non-radioactive materials. 38 important accident examples of environmental contamination of radioactive materials in the world from 1944 to 2001 are stated. Heavily polluted areas by accidents are explained, for example, Chernobyl, atomic reactor accidents, development of nuclear weapon in USA and USSR, radioactive waste in the sea. The environmental contamination ability caused by using radioactive materials, medical use, operating reactor, disposal, transferring, crashing of airplane and artificial satellite, release are reported. It contains measurements and monitor technologies, remediation technologies of environmental contamination and separation and transmutation of radioactive materials. On the environmental contamination by non-radioactive materials, transformation of the soil contamination in Japan and its control technologies are explained. Protection and countermeasure of environmental contamination of radioactive and non-radioactive materials in Japan and the international organs are presented. There are summary and proposal in the seventh chapter. (S.Y.)

First Results from Contamination Monitoring with the WFC3 UVIS G280 Grism

Science.gov (United States)

Rothberg, B.; Pirzkal, N.; Baggett, S.

2011-11-01

The presence of contaminants within the optical light path of the instrument or telescope can alter photometric zeropoints and the observed flux levels of imaging and spectra, particularly at UV wavelengths. Regular monitoring of a spectro-photometric standard star using photometric filters has been used in the past to monitor the presence of contaminants and (when necessary) re-calibrate zeropoints. However, the use of the WFC3 UVIS Grism mode (G280 filter) may provide a more robust early alert detection system for the presence of contaminants, in particular, those that are photo-polymerized from the bright Earth. These contaminants may collect on surfaces in the optical light path of the telescope. The G280 grism is sensitive to light at wavelengths below the cutoff of the bluest UV filter (F218W). In this ISR, we present: 1) the first results from G280 monitoring for the period of 2010-November through 2011-August; 2) the discovery of an anomaly in the WCS header information of sub-array exposures; and 3) an outline for reducing standard G280 grism observations and the specialized case of observations obtained in sub-array mode.

Real-time monitoring for alpha emitters in high-airflow environments

International Nuclear Information System (INIS)

Koster, J.E.; MacArthur, D.W.; Bounds, J.A.; Rawool-Sullivan, M.; Whitley, C.R.; Conaway, J.G.; Steadman, P.A.

1996-01-01

Key problems in detecting alpha contamination for site characterization and decontamination and decommissioning that remain to be solved include measurement of airborne contamination, material holdup within pipes, and leakage of material containers. These problems are very difficult using traditional alpha detectors and systems. The ionization detection method (long-range alpha detection of LRAD) offers a number of specific advantages for these environmental measurements. An LRAD system detects the air molecules ionized by alpha-emitting contamination rather than the alpha particles. Thus, LRAD-based detectors are not limited by the short range of alpha particles and can be used to detect contamination anywhere that air can penetrate. Extending this technology to large enclosures of long pipes requires a system optimized for large airflows. In this paper we will present designs and preliminary results for high-volume flow-through air monitors based on the LRAD technique. In addition, we will discuss the behavior of the monitors and their potential applications

Evaluation of targeted and untargeted effects-based monitoring tools to assess impacts of contaminants of emerging concern on fish in the South Platte River, CO.

Science.gov (United States)

Ekman, Drew R; Keteles, Kristen; Beihoffer, Jon; Cavallin, Jenna E; Dahlin, Kenneth; Davis, John M; Jastrow, Aaron; Lazorchak, James M; Mills, Marc A; Murphy, Mark; Nguyen, David; Vajda, Alan M; Villeneuve, Daniel L; Winkelman, Dana L; Collette, Timothy W

2018-08-01

Rivers in the arid Western United States face increasing influences from anthropogenic contaminants due to population growth, urbanization, and drought. To better understand and more effectively track the impacts of these contaminants, biologically-based monitoring tools are increasingly being used to complement routine chemical monitoring. This study was initiated to assess the ability of both targeted and untargeted biologically-based monitoring tools to discriminate impacts of two adjacent wastewater treatment plants (WWTPs) on Colorado's South Platte River. A cell-based estrogen assay (in vitro, targeted) determined that water samples collected downstream of the larger of the two WWTPs displayed considerable estrogenic activity in its two separate effluent streams. Hepatic vitellogenin mRNA expression (in vivo, targeted) and NMR-based metabolomic analyses (in vivo, untargeted) from caged male fathead minnows also suggested estrogenic activity downstream of the larger WWTP, but detected significant differences in responses from its two effluent streams. The metabolomic results suggested that these differences were associated with oxidative stress levels. Finally, partial least squares regression was used to explore linkages between the metabolomics responses and the chemical contaminants that were detected at the sites. This analysis, along with univariate statistical approaches, identified significant covariance between the biological endpoints and estrone concentrations, suggesting the importance of this contaminant and recommending increased focus on its presence in the environment. These results underscore the benefits of a combined targeted and untargeted biologically-based monitoring strategy when used alongside contaminant monitoring to more effectively assess ecological impacts of exposures to complex mixtures in surface waters. Published by Elsevier Ltd.

Evaluation of the RSG-GAS Alpha-Beta Aerosol Contaminant Monitor Performance Under Reactor Operation Condition

International Nuclear Information System (INIS)

Hartoyo, Unggul; Setiawanto, Anto; Sumarno, Yulius

2000-01-01

Analysis to evaluate the RSG-GAS alpha-beta aerosol contaminant monitor performance was done. The high potential radiation working area such as in RSG-GAS is important to monitored for personal safety. Further it is necessary to assure that the system monitor is reliable enough under normal conditions as well as emergency condition. The method uses in this analysis are monitoring and comparing with the standard source. The standard course indicator and panel in main control room indicate that the result is 1 x 110 exp 9 Ci/m exp 3. Based on data monitor observation, the RSG-GAS alpha-beta aerosol contaminant monitor system under reactor operation condition has a good enough performance

Body-surface contamination monitoring preparatory to monitoring for internal contamination

International Nuclear Information System (INIS)

Schlueter, W.; Klucke, H.

1980-01-01

Measurements in the whole-body counter of the SAAS are routinely preceded by a thorough inspection of the patients for body-surface contamination to protect the sensitive counting equipment against becoming contaminated and to avoid a falsified indication of incorporated radionuclides. The measuring system employed for these examinations is described. (author)

Nuclear electronic components of surface contamination monitor based on multi-electrode proportional counter

International Nuclear Information System (INIS)

Du Xiangyang; Zhang Yong; Han Shuping; Rao Xianming; Fang Jintu

2001-01-01

The nuclear electronic components applying in Portal Monitor and Hands and Feet Surface Contamination Monitor were based on modern integrated circuit are introduced. The detailed points in circuit design and manufacturing technique are analyzed

Rapid monitoring for transuranic contaminants during buried waste retrieval

International Nuclear Information System (INIS)

McIsaac, C.V.; Sill, C.W.; Gehrke, R.J.; Shaw, P.G.; Randolph, P.D.; Amaro, C.R.; Pawelko, R.J.; Thompson, D.N.; Loomis, G.G.

1991-03-01

This document reports results of research performed in support of possible future transuranic waste retrieval operations at the Idaho National Engineering Laboratory Radioactive Waste Management Complex. The focus of this research was to evaluate various methods of performing rapid and, as much as possible, ''on-line'' quantitative measurements of 239 Pu or 241 Am, either as airborne or loose contamination. Four different alpha continuous air monitors were evaluated for lower levels of detection of airborne 239 Pu. All of the continuous air monitors were evaluated by sampling ambient air. In addition, three of the continuous air monitors were evaluated by sampling air synthetically laden with clean dust and dust spiked with 239 Pu. Six methods for making quantitative measurements of loose contamination were investigated. They were: (1) microwave digestion followed by counting in a photon electron rejecting alpha liquid scintillation spectrometer, (2) rapid radiochemical separation followed by alpha spectrometry, (3) measurement of the 241 Am 59 keV gamma ray using a thin window germanium detector, (4) measurement of uranium L-shell x-rays, (5) gross alpha counting using a large-area Ag activated ZnS scintillator, and (6) direct counting of alpha particles using a large-area ionization chamber. 40 refs., 42 figs., 24 tabs

Requirements for internal contamination monitoring units

International Nuclear Information System (INIS)

Werner, E.; Beyer, D.; Doerfel, H.; Erlenbach, H.; Fischbach, G.; Henrichs, K.; Keller, K.D.; Koenig, K.; Riedel, W.; Scheler, R.; Schieferdecker, H.

1994-01-01

For the evaluation of internal contamination by officially authorized monitoring units according to section 63 (6) of the German radiation protection ordinance, a directive will be prepared in order to define uniform requirements for the laboratories in charge of incorporation monitoring by appointment of the relevant authorities. These requirements refer to equipment, to performance of measurements, to interpretation of measured values, to quality control as well as to documentation and to delivery of results. The duties of such laboratories comprise measurements of radioactivity, evaluation of intakes of radionuclides and of the resulting internal radiation dose, but also transmission of results to the employer, to the central dose registry, and under certain circumstances to the authorities. Among the requirements to be met by the laboratory for incorporation control are a sufficient measuring efficiency, the implementation of in-house checks, and the participation in intercomparison programs. For the accomplishment of such duties the laboratory needs appropriate apparatus, rooms, facilities, and staffing. (orig.) [de

Monitoring the Environments We Depend On

International Nuclear Information System (INIS)

Madsen, Michael

2013-01-01

Our overuse of natural resources, pollution and climate change are weakening natural systems’ ability to adapt to ever more sources of stress. The varied environments of our planet are interconnected and the pollution of one has ramifications across all. It is thus important to monitor the health of our environment to ensure a sustainable future. The IAEA, through its Environment Laboratories, Water Resource Programme, and technical cooperation programme, applies unique, versatile and cost-effective isotopic and nuclear techniques to understand many of the key environmental mechanisms needed to ensure a sustainable future. These monitoring systems help Member States make ecologically-responsible and scientifically-grounded development decisions

Unregulated Contaminant Monitoring Rule 3 (UCMR 3), (2013-2015) Occurrence Data

Data.gov (United States)

U.S. Environmental Protection Agency — The third Unregulated Contaminant Monitoring Rule (UCMR 3), conducted under EPA oversight, was published in the Federal Register on May 2, 2012. UCMR 3 requires...

Airborne contamination in the indoor environment and its implications for dose

Energy Technology Data Exchange (ETDEWEB)

Andersson, K.G.; Roed, J.; Byrne, M.A.; Hession, H.; Clark, P.; Elahi, E.; Buskov, A.; Hou, X.L.; Prip, H.; Olsen, S.K.; Roed, T

2004-04-01

Previous work has indicated that radiation doses from deposition on human skin, hair and clothing may contribute significantly to the dose received after a major nuclear accident, such as that, which happened at Chernobyl in 1986. The available data was, however, sparse and associated with considerable variation, clearly showing a need for further investigations to verify preliminary conclusions, examine processes in greater detail and identify important factors causing the observed parameter variation. For instance, the impacts of thermophoresis, electrophoresis, skin moisture and wind speed on the deposition of contaminant aerosol were examined, and since the previous measurements had indicated that elemental iodine could be a particularly problematic contaminant, experimental work was additionally undertaken to examine the process of deposition of this species to skin. Since both clearance and percutaneous penetration of deposited contaminants could play important roles in determining doses, experimental programmes were dedicated to the identification of parameters of interest in these contexts. Also doses from contamination on different surfaces in the indoor environment have in the past traditionally been neglected, and a theoretical approach, based on measurements, was developed for accurate prediction of these doses under different conditions. Also resuspension of deposited matter and its role in dose formation, by subsequent deposition or inhalation, was investigated through experiments. Contact transfer of contaminants from an indoor surface to human skin may give yet another contribution to dose and also the relevant parameters in this direction were examined experimentally. The ultimate goal of the investigations was to enable the determination of the various contributions to dose in a contaminated indoor environment. A model methodology was developed and an example of its use was given. It was found that after a major nuclear accident, doses from indoor

Statistical considerations in practical contamination monitoring

International Nuclear Information System (INIS)

Brodsky, A.; Gallaghar, R.G.

1991-01-01

This paper reports on an examination of smear survey practices which indicates that many radiation safety programs are lacking in important aspects of contamination monitoring. In order to satisfy regulatory and potential litigatory requirements, smear surveys should include the measurement and recording of the flowing data: area of each smear and smear procedure (by reference); total counts on smear and counting procedure; total counts on appropriate blanks and description of blank; total counts on standard and specifications of standard; and all counting times. The rationale for these smear survey requirements is obtained by examining the formulation of the minimum detectable amount (MDA) on a smear

Present state of the monitoring for internal contamination at Tokai Research Establishment, Japan Atomic Energy Research Institute

International Nuclear Information System (INIS)

Akaishi, J.; Fukuda, H.; Mizushita, S.

1980-01-01

Results are presented of internal contamination surveys carried out since 1969 at Tokai Research Establishment. Routine monitoring sometimes revealed significant internal contamination for tritium workers, but almost never for others. The number of subjects for special monitoring varied according to the activities. In 1965, the number of subjects for special monitoring was nearly 300, due to a reactor repair that year. In recent years, the number or special monitoring has been several tens or so. With regard to special monitoring, the workers with significant internal contamination were less than 50%. The internal dose (50 years) estimated for the majority of subjects was of mrem order. During the past 15 years, only several cases of exposure of rem order were found. The highest dose experienced was about 4 rems ( 131 I thyroid) (U.K.)

Environment contamination by mycotoxins and their occurrence in food and feed: Physiological aspects and economical approach.

Science.gov (United States)

Capcarova, Marcela; Zbynovska, Katarina; Kalafova, Anna; Bulla, Jozef; Bielik, Peter

2016-01-01

The contamination of food and feed by mycotoxins as toxic metabolites of fungi is a risk not only for consumers resulting in various embarrassment regarding health status and well-being, but also for producers, companies and export market on the ground of economic losses and ruined stability of economic trade. As it is given in historical evidence, the contamination of food by mycotoxins is a topic as old as a history of mankind, finding some evidence even in the ancient books and records. Nowadays, the mycotoxins are used in modern biotechnological laboratories and are considered an agent for targeting the specific cells (e.g., defected cells to eliminate them). However, this promising procedure is only the beginning. More concern is focused on mycotoxins as abiotic hazard agents. The dealing with them, systematic monitoring, and development of techniques for their elimination from agricultural commodities are worldwide issues concerning all countries. They can be found alone or in co-occurrence with other mycotoxins. Thus, this review aims to provide widened information regarding mycotoxins contamination in environment with the consequences on health of animals and humans. The inevitability for more data that correctly determine the risk points linked to mycotoxins occurrence and their specific reactions in the environment is demonstrated. This review includes various symptoms in animals and humans that result from mycotoxin exposure. For better understanding of mycotoxin's impact on animals, the sensitivities of various animal species to various mycotoxins are listed. Strategies for elimination and preventing the risks of mycotoxins contamination as well as economical approach are discussed. To complete the topic, some data from past as historical evidences are presented.

Analysis of Radioactivity Contamination Level of Kartini Reactor Efluen Gas to the Environment

International Nuclear Information System (INIS)

Suratman; Purwanto; Aminjoyo, S

1996-01-01

The analysis of radioactivity contamination level of Kartini reactor efluen gas to the environment has been done from 13-10-'95 until 8-2-'96. The aim of this research is to determine the radioactivity contamination level on the environment resulted from the release of Kartini reactor efluen gas and other facilities at Yogyakarta Nuclear Research Centre through stack. The analysis methods is the student t-test, the first count factor test and the gamma spectrometry. The gas sampling were carried out in the stack reactor, reactor room, environment and in other room for comparison. Efluen gas was sucked through a filter by a high volume vacuum pump. The filter was counted for beta, gamma and alpha activities. The radioactivity contamination level of the efluen gas passing through the stack to the environment was measured between 0.57 - 1.34 Bq/m3, which was equal to the airborne radioactivity in environment between 0.69 - 1.12 Bq/m3. This radioactivity comes from radon daughter, decay products result from the natural uranium and thorium series of the materials of the building

NRPA. Radioactivity in the marine environment 2008 and 2009. Results from the Norwegian national monitoring programme (RAME)

International Nuclear Information System (INIS)

Gaefvert, T.; Heldal, H. E.; Brungot, A. L.; Gwynn, J.; Svaeren, I.; Kolstad, A. K.; Moeller, B.; Straalberg, E.; Christensen, G. C.; Drefvelin, J.; Dowdall, M.; Lind, B.; Rudjord, A. L.

2011-04-01

The issue of present and potential radioactive contamination in the marine environment has received considerable attention in Norway. In the late 1980s several accidents and incidents involving nuclear-powered submarines,demonstrated that the risk of the release of radionuclides into the Barents Sea should be considered more carefully. In particular, it became evident that better documentation concerning the radioactivity levels in fish and other seafood was important for the seafood export industries. Furthermore, in the early 1990s, information concerning the dumping of nuclear waste emerged through bilateral environmental cooperation between Norway and Russia. In the years that followed, concern grew regarding the safety of military and civil nuclear installations in the northwest of Russia. This concern was associated not only with possible reactor accidents, but also with the prolonged or sudden release of radio-nuclides from radioactive waste facilities.In addition to the potential threats outlined above, radionuclides originating from nuclear weapons fallout, the Chernobyl accident and waste discharged from European reprocessing facilities have been detected in the Norwegian marine environment. In 1994 and 1995, the discharge of 99Tc from the reprocessing facility at Sellafield in the UK increased sharply, and although this discharge has been reduced, it continued at a high level up to 2003. There has been much public concern about the consequences of such kinds of release, as the radionuclides discharged to the Irish Sea are transported by ocean currents via the North Sea into the Norwegian coastal current and to the Barents Sea. In response to this concern, programmes for the monitoring of radioactivity in the marine environment have been established. Due to the economic importance of the fishing industry and its vulnerability to contamination, as well as any rumours of radioactive contamination, one of the main objectives of these programmes is to

Radioactivity monitoring of the Irish marine environment 1996 and 1997

International Nuclear Information System (INIS)

Long, S.; Pollard, D.; Hayden, E.; Smith, V.; Fegan, M.; Ryan, T.P.; Dowdall, A.; Cunningham, J.D.

1998-07-01

This report presents the results of the marine radioactivity monitoring programme carried out be the Radiological Protection Institute of Ireland (RPII) during 1996 and 1997. The primary objective of the programme is to assess the exposure to the Irish population resulting from radioactive contamination of the Irish marine environment and to estimate the risks to health from this exposure. Discharges from the British Nuclear Fuels (BNFL) reprocessing plant at Sellafield continue to be the principal source of this contamination. Approximately 300 samples of fish, shellfish, seaweed, seawater and sediment were collected each year. The samples were analysed for a range of contaminating radionuclides at the Institute's radioanalytical laboratory. The results show that the radionuclide of greatest dosimetric significance continues to be caesium-137. Since 1994 the commissioning and operation of new facilities at Sellafield have resulted in an increase in the discharges of technetium-99 to the Irish Sea. This has been reflected in an increase in the activity concentration of this radionuclide at all east coast sampling sites during the reporting period. The main pathway contributing to the exposure of the Irish public is the consumption of seafood. The committed effective dose to heavy consumers of seafood due to artificial radionuclides in 1996 was 1.6 μSv and in 1997 was 1.4 μSv. in 1996 was 1.6 μSv and in 1997 was 1.4 μSv

Results of monitoring at Olkiluoto in 2007. Environment

International Nuclear Information System (INIS)

Haapanen, R.

2008-06-01

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2007. These summary reports have been published since 2005 (target year 2004). The environmental monitoring system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for monitoring the state of the environment during the construction (and later operation) of ONKALO underground characterization facility. Although some of the nuclear power production related monitoring studies by TVO (the power company) have been going on from the 1970s, the repository-related environmental monitoring of Olkiluoto Island has only recently been comprehensive. In the monitoring data, the ongoing construction work (OL3, ONKALO and related infrastructure) is seen for instance in raised noise levels and deposition of base cations and iron. The land-use continues to change, but where there is natural environment, it resembles other coastal locations. The nearby marine environment is affected by the cooling water from the nuclear power plant. (orig.)

Radiation monitoring in the NPP environment, control of radioactivity in NPP-environment system

International Nuclear Information System (INIS)

Egorov, Yu.A.

1987-01-01

Problems of radiation monitoring and control of the NPP-environment system (NPPES) are considered. Radiation control system at the NPP and in the environment provides for the control of the NPP, considered as the source of radioactive releases in the environment and for the environmental radiation climate control. It is shown, that the radiation control of the NPP-environment system must be based on the ecological normalization principles of the NPP environmental impacts. Ecological normalization should be individual for the NPP region of each ecosystem. The necessity to organize and conduct radiation ecological monitoring in the NPP regions is pointed out. Radiation ecological monitoring will provide for both environmental current radiation control and information for mathematical models, used in the NPPES radiation control

Global styrene oligomers monitoring as new chemical contamination from polystyrene plastic marine pollution.

Science.gov (United States)

Kwon, Bum Gun; Koizumi, Koshiro; Chung, Seon-Yong; Kodera, Yoichi; Kim, Jong-Oh; Saido, Katsuhiko

2015-12-30

Polystyrene (PS) plastic marine pollution is an environmental concern. However, a reliable and objective assessment of the scope of this problem, which can lead to persistent organic contaminants, has yet to be performed. Here, we show that anthropogenic styrene oligomers (SOs), a possible indicator of PS pollution in the ocean, are found globally at concentrations that are higher than those expected based on the stability of PS. SOs appear to persist to varying degrees in the seawater and sand samples collected from beaches around the world. The most persistent forms are styrene monomer, styrene dimer, and styrene trimer. Sand samples from beaches, which are commonly recreation sites, are particularly polluted with these high SOs concentrations. This finding is of interest from both scientific and public perspectives because SOs may pose potential long-term risks to the environment in combination with other endocrine disrupting chemicals. From SOs monitoring results, this study proposes a flow diagram for SOs leaching from PS cycle. Using this flow diagram, we conclude that SOs are global contaminants in sandy beaches around the world due to their broad spatial distribution. Copyright © 2015 Elsevier B.V. All rights reserved.

Present state of the monitoring for internal contamination at Tokai Research Establishment, Japan Atomic Energy Research Institute

International Nuclear Information System (INIS)

Akaishi, J.; Fukuda, H.; Mizushita, S.

1980-01-01

At Tokai Research Establishment, JAERI, over one thousand people work in hot areas such as reactors, accelerators, chemical laboratories and waste treatment plants. The monitoring for internal contamination of this personnel is presented. Routine and special monitoring are carried out. The object of the former is to check for the presence of significant contamination, and that of the latter is to estimate body burden and committed dose equivalent, if necessary. Heavy shield and shadow shield whole body counters, a low energy lung counter and a wound monitor are used to detect the internal contamination due to γ or chi ray emitters, and bioassay technique is used for α or β emitters and uranium. The results of the monitoring until now are presented. (H.K.)

Effect-directed analysis supporting monitoring of aquatic environments--An in-depth overview.

Science.gov (United States)

Brack, Werner; Ait-Aissa, Selim; Burgess, Robert M; Busch, Wibke; Creusot, Nicolas; Di Paolo, Carolina; Escher, Beate I; Mark Hewitt, L; Hilscherova, Klara; Hollender, Juliane; Hollert, Henner; Jonker, Willem; Kool, Jeroen; Lamoree, Marja; Muschket, Matthias; Neumann, Steffen; Rostkowski, Pawel; Ruttkies, Christoph; Schollee, Jennifer; Schymanski, Emma L; Schulze, Tobias; Seiler, Thomas-Benjamin; Tindall, Andrew J; De Aragão Umbuzeiro, Gisela; Vrana, Branislav; Krauss, Martin

2016-02-15

Aquatic environments are often contaminated with complex mixtures of chemicals that may pose a risk to ecosystems and human health. This contamination cannot be addressed with target analysis alone but tools are required to reduce this complexity and identify those chemicals that might cause adverse effects. Effect-directed analysis (EDA) is designed to meet this challenge and faces increasing interest in water and sediment quality monitoring. Thus, the present paper summarizes current experience with the EDA approach and the tools required, and provides practical advice on their application. The paper highlights the need for proper problem formulation and gives general advice for study design. As the EDA approach is directed by toxicity, basic principles for the selection of bioassays are given as well as a comprehensive compilation of appropriate assays, including their strengths and weaknesses. A specific focus is given to strategies for sampling, extraction and bioassay dosing since they strongly impact prioritization of toxicants in EDA. Reduction of sample complexity mainly relies on fractionation procedures, which are discussed in this paper, including quality assurance and quality control. Automated combinations of fractionation, biotesting and chemical analysis using so-called hyphenated tools can enhance the throughput and might reduce the risk of artifacts in laboratory work. The key to determining the chemical structures causing effects is analytical toxicant identification. The latest approaches, tools, software and databases for target-, suspect and non-target screening as well as unknown identification are discussed together with analytical and toxicological confirmation approaches. A better understanding of optimal use and combination of EDA tools will help to design efficient and successful toxicant identification studies in the context of quality monitoring in multiply stressed environments. Copyright © 2015 Elsevier B.V. All rights reserved.

Contaminant monitoring programmes using marine organisms: Quality assurance and good laboratory practice

International Nuclear Information System (INIS)

1990-01-01

This publication provides guidelines for obtaining reliable and relevant data during monitoring programmes in which contaminants are measured in marine organisms. It describes the precautions to be taken in each of the procedural steps from planning and sampling to the publication of data reports. The purpose of this document is to provide general guidance on quality assurance and to outline the approach that could be taken by laboratories to achieve the specific aims(s) for each marine pollution monitoring programme. Since most laboratories are currently focussing on programmes involving marine organisms, this document will be confined to this aspect. Four main aims can be identified for programmes involving the collection and analysis of marine organisms for the three main groups of contaminants (metals, organochlorine compounds and petroleum hydrocarbons), these are: (i) The measurement of contaminant levels in edible marine organisms in relation to public health; (ii) The identification of heavily contaminated areas of the sea (''hot spots'') where levels of contaminants are at least an order of magnitude higher than levels in clean or uncontaminated areas; (iii) The establishment of present levels of contaminants in marine organisms (i.e., a ''baseline''); (iv) The assessment of changes in concentrations of contaminants in organisms over a period of time (trends). The selection of organisms will be dictated by the eating patterns of the population. These can be identified by a survey of the species sold at the market, by obtaining information from colleagues in government departments who deal with such matters or in the absence of such information, by distributing a questionnaire to a representative section of the general public. 9 refs, 4 figs

Guidelines for radiological monitoring of the environment

International Nuclear Information System (INIS)

1990-11-01

This Standard provides criteria to be used in deciding whether an environmental monitoring program is required for a given nuclear facility. It also sets out a systematic approach to monitoring the environment, which is considered to be outside the facility boundary. It provides guidelines for establishing an environmental program covering sampling and analysis protocols, analytical techniques and sensitivity, statistical treatment of monitoring results, quality assurance, methods for expressing results, and record keeping. The standard applies to the environment of a nuclear facility operating mainly under normal conditions; in addition, certain of these requirements may also apply to situations involving abnormal releases

Monitoring of environment

Energy Technology Data Exchange (ETDEWEB)

Mitsudera, M

1974-09-01

The amount of pollutants discharged has now exceeded the environment's natural ability to purify itself. The effect of urbanization is traced especially the degeneration of plants and animals in Tokyo. One of the methods of monitoring plants is remote sensing with multi-band photography and multi-spectroscanning. There is a correlation between the sulfur content of tree leaves and multi-band photograms on red pine trees with a correlation coefficient of -0.862.

Partial monitoring system Radioactivity of the Environment, 2006

International Nuclear Information System (INIS)

Melicherova, T.

2007-01-01

In this report the Partial monitoring system 'Radioactivity of the Environment' for the year 2006 is presented. International co-operation of the Slovak Hydrometeorological Institute in the Partial monitoring system 'Radioactivity of the Environment' of the Slovak Republic, international co-operation as well as financial data are reviewed

Contaminant geochemistry. Interactions and transport in the subsurface environment

Energy Technology Data Exchange (ETDEWEB)

Berkowitz, Brian; Dror, Ishai; Yaron, Bruno [Weizmann Institute of Science, Rehovot (Israel). Dept. of Environmental Sciences and Energy Research

2008-07-01

This book combines earth science, subsurface hydrology and environmental geochemistry, providing a comprehensive background for specialists interested in the protection and sustainable management of the subsurface environment. The reader is introduced to the chemistry of contaminants, which usually disturb the natural equilibrium in the subsurface as a result of human activity. The major focus of the book is on contaminant reactions in soil solutions, groundwater and porous media solid phases, accounting for their persistence and transformation in the subsurface, as they are transported from the land surface into groundwater. Discussions on selected case studies are provided. (orig.)

Environment Laboratories Newsletter. Vol. 1, No. 02, Jul.-Dec. 2014

International Nuclear Information System (INIS)

Liong Wee Kwong, Laval

2014-11-01

Responding to Member States’ requests to physically monitor and report on the types and trends of contaminants in the natural environment is core business for the IAEA Environment Laboratories. This includes providing quality control and capacity building services relevant to radioactive substances and toxic pollutants, as well as communicating how environmental contaminants interact with other stressors to impact biodiversity and undermine the provision of essential ecosystem services. By fulfilling these functions using a practical, hands-on approach, the IAEA Environment Laboratories are unique within the UN system. In this edition of the Environment Laboratories Newsletter, we focus on recent initiatives and field activities to monitor radioactive and other substances in the environment, as well as key partnerships focused on improving the performance of analytical laboratories around the world. We report on a diverse array of activities, from sea water monitoring off the coast of Fukushima, Japan, and the Barents Sea, to training courses on the rapid determination of radioactive strontium in milk and the analysis of trace elements and organic contaminants in marine samples

Model for evaluation of the radiological exposure in an urban environment after a radioactive contamination

International Nuclear Information System (INIS)

Rochedo, Elaine Rua Rodriguez

1994-08-01

A dynamic model aimed on the assessment of the long-term consequences of an accidental contamination of an urban environments has been developed. The model was designed to assess the radiation exposure, as a function of time, of the different kinds of people that uses the contaminated environment, the relative contribution of each exposure pathway and to simulate the application of countermeasures and its effects on the reduction of surfaces contamination and on the exposure of the individuals and of the population. The model is an empirical one, mainly based on environmental data gathered after the Chernobyl and Goiania accidents, and takes into account climatic and population habits characteristic of tropical areas. The model was applied here to a contamination with the radionuclide 137 Cs but can be easily adapted to other nuclides by changes on parameter values. An analysis of the variabilities associated to the model outputs regarding population habits, different kinds of urban environment and parameters uncertainty has shown that the main source of uncertainty on model predictions is associated to a correct knowledge of population characteristics, its habits and used of the contaminated environment. (author)

Development and application of techniques for monitoring the bioremediation of petroleum hydrocarbon-contaminated soils

International Nuclear Information System (INIS)

Greer, C.; Hawar, J.; Samson, R.

1994-01-01

A series of tests was designed to examine bioremediation potential in soil and to monitor performance during the treatment operation. Physical and chemical characterization of the soil provides information on the types of organics, their concentrations, and whether interfering materials are present. Microbiological assessment involves culturing of bacterial populations in the soil and examination of the colonies to determine which have the genetic potential to degrade the soil contaminants. Catabolic gene probes are used to survey viable bacteria from petroleum hydrocarbon contaminated soils. Such soils consistently demonstrate the presence of bacteria possessing the genetic capability to degrade simple straight-chain alkanes and aromatics. Mineralization and respirometric studies are indicators of the biological activity in the soil, and can be directed at microbial activity towards specific substrates. Gene probe monitoring of a petroleum hydrocarbon contaminated soil during biopile treatment demonstrated that hydrocarbon-degrading bacterial numbers and activity were temperature dependent. The results showed that the activity of the indigenous bacteria as measured by hexadecane mineralization also correlated with the disappearance of the oil and grease. The application of this protocol has provided a useful means to screen contaminated soils for bacteria with desirable catabolic properties and to monitor pollutant-degrading bacteria during biotreatment. 15 refs., 10 figs

Monitoring of plutonium contaminated solid waste streams. Chapter IV: Passive neutron assay

International Nuclear Information System (INIS)

Birkhoff, G.; Bondar, L.

1978-01-01

The fundamentals of the passive neutron technique for the non destructive assay of plutonium bearing materials are summarized. A reference monitor for the passive neutron assay of Pu contaminated solids is described in terms of instrumental design principles and performances. The theoretical model of this reference monitor with pertinent nuclear data and functions for the interpretation of experimental data is given

Cesium-137 monitoring of aquatic and terrestrial environment in Goiania

International Nuclear Information System (INIS)

Godoy, J.N.O.; Guimaraes, J.R.D.; Gouvea, V.A.; Rochedo, E.R.R.

1988-01-01

During the Goiania radiological accident, aprox. 1200 Ci of Cs - 137 were inadvertently manipulated and an unknown fraction of this total was available for environmental dispertion during at least 6 weeks, before efficient remedial action could be undertaken. The main dispersion pathways were rainwater run-off and soil ressuspension and further deposition. Cs-137 monitoring in the local environment started in the first week of October, including to date aprox. 1300 measurements of soil, vegetable (fruits and kitchen-gardens), ground and drinking water, sediments and fish, aerosol, precipitation and external dose measurement with TL dosimeters, in the surroundings of the main contamination spots. Until the conclusion of de-contamination activities in late December, the ranges of Cs-137 in a 50m radius of evacuated areas were as follows: 10 2 -10 4 Bq/Kg for surface soils and edible vegetables, 10 0 -10 1 mBq/m 3 in air and 10 Bq/l in all water types. River sediment and fish 5-10 Km downstream the accident are ranged respectively 10 2 -10 3 and 10 2 /Kg. These data indicated the pathways and locations for intervention for further reduction of radiation exposure. This intervention consisted mainly in tree-tipping and surface soil removal. (author) [pt

MAFF monitoring of the terrestrial environment

International Nuclear Information System (INIS)

Sherlock, J.C.

1993-01-01

This paper addresses the food surveillance programme of the Ministry of Agriculture, Fisheries and Food (MAFF), in particular the Terrestrial Radioactivity Monitoring Programme (TRAMP) and the estimation of dietary intake of radionuclides. To define the surveillance programme the following issues need to be decided upon: 1) the type of food which should be analysed; 2) the nature of the contaminants which should be analysed; and 3) the geographical location from which the food samples should be taken. (author)

Tritium contamination and monitoring at Frascati Neutron Generator

Energy Technology Data Exchange (ETDEWEB)

Lucci, F.; Sandri, S.; Ianni, A. [ENEA, Frascati (Italy). Dipartimento Ambiente; Vasselli, R. [ANPA, Roma (Italy); Pillon, M.; Bettinali, L. [ENEA, Frascati (Italy). Dipartimento Energia

1994-11-01

The Frascati Neutron Generator (FGN) is a specialised 300 keV, 3 mA direct electrostatic deuteron accelerator which produces about 5-10{sup 1}1 14 MeV neutrons per second by D-T reactions on a tritium-titanium fixed target. This paper concerns the tritium contamination control and monitoring aspects after some months of testing and a preliminary period of operation of the plant. The tritium monitoring system is composed of both on-line and off-line devices to control the tritium concentration in the atmosphere measured from different parts of the plant: vacuum exhaust clean up (VECU) system, stack, etc. The on-line devices are three flux monitors, that sample continuosly the air from up to eight different points in the plant. The passive sampling system is designed to select the chemical form of tritium and to collect respectively HTO and HT in two different cartridges filled with an appropriate drying material. The response of the on-line tritium monitor system are exposed and discussed: some measurements performed with atmosphere dehumidifying apparatus of this system are described and the relevant results are analysed.

Tritium contamination and monitoring at Frascati Neutron Generator

International Nuclear Information System (INIS)

Lucci, F.; Sandri, S.; Ianni, A.; Pillon, M.; Bettinali, L.

1994-11-01

The Frascati Neutron Generator (FGN) is a specialised 300 keV, 3 mA direct electrostatic deuteron accelerator which produces about 5-10 1 1 14 MeV neutrons per second by D-T reactions on a tritium-titanium fixed target. This paper concerns the tritium contamination control and monitoring aspects after some months of testing and a preliminary period of operation of the plant. The tritium monitoring system is composed of both on-line and off-line devices to control the tritium concentration in the atmosphere measured from different parts of the plant: vacuum exhaust clean up (VECU) system, stack, etc. The on-line devices are three flux monitors, that sample continuosly the air from up to eight different points in the plant. The passive sampling system is designed to select the chemical form of tritium and to collect respectively HTO and HT in two different cartridges filled with an appropriate drying material. The response of the on-line tritium monitor system are exposed and discussed: some measurements performed with atmosphere dehumidifying apparatus of this system are described and the relevant results are analysed

Optimization of monitoring sewage with radionuclide contaminants. Optimizatsiya kontroya stochnykh vod, zagryaznennykh radionuklidami

Energy Technology Data Exchange (ETDEWEB)

Egorov, V N [Vsesoyuznyj Nauchno-Issledovatel' skij Inst. Neorganicheskikh Materialov, Moscow (Russian Federation)

1991-03-01

Recommendations on optimization of monitoring contaminated sewage aimed at enviromental protection agxinst radioactive contamination at minimum cost are presented. The way of selecting water sampling technique depends on water composition stability and flow rate. Depending on the type of radionuclide distribution in the sewage one can estimate minimum frequency of sampling or number of samples sufficient for assuring reliability of the conclusion on the excess or non-excess of permissible radioactive contamination levels, as well as analysis assigned accuracy. By irregular contaminated sewage-discharge and possibility of short-term releases of different form and duration, sampling should be accomplished through automatic devices of continuons or periodic operation.

Contaminant geochemistry. Interactions and transport in the subsurface environment. 2. ed.

Energy Technology Data Exchange (ETDEWEB)

Berkowitz, Brian; Dror, Ishai; Yaron, Bruno [Weizmann Institute of Science, Rehovot (Israel). Dept. of Earth and Planetary Sciences

2014-07-01

In this updated and expanded second edition, new literature has been added on contaminant fate in the soil-subsurface environment. In particular, more data on the behavior of inorganic contaminants and on engineered nanomaterials were included, the latter comprising a group of ''emerging contaminants'' that may reach the soil and subsurface zones. New chapters are devoted to a new perspective of contaminant geochemistry, namely irreversible changes in pristine land and subsurface systems following chemical contamination. Two chapters were added on this topic, focusing attention on the impact of chemical contaminants on the matrix and properties of both liquid and solid phases of soil and subsurface domains. Contaminant impacts on irreversible changes occurring in groundwater are discussed and their irreversible changes on the porous medium solid phase are surveyed. In contrast to the geological time scale controlling natural changes of porous media liquid and solid phases, the time scale associated with chemical pollutant induced changes is far shorter and extends over a ''human lifetime scale''.

SoilCAM: soil contamination: advanced integrated characterisation and time-lapse monitoring

NARCIS (Netherlands)

French, H.K.; Zee, van der S.E.A.T.M.; Meju, M.

2009-01-01

The SoilCAM project is aimed at improving current methods for monitoring contaminant distribution and biodegradation in the subsurface. Currently proven methods, based on invasive sampling of soil, soil water and gaseous phase, are unable to provide sufficiently accurate data with high enough

SEL monitoring of the earth's energetic particle radiation environment

International Nuclear Information System (INIS)

Sauer, H.H.

1989-01-01

The Space Environment Laboratory (SEL) of the National Oceanic and Atmospheric Administration (NOAA) maintains instruments on board the GOES series of geostationary satellites, and aboard the NOAA/TIROS series of low-altitude, polar-orbiting satellites, which provide monitoring of the energetic particle radiation environment as well as monitoring the geostationary magnetic field and the solar x-ray flux. The data are used by the SEL Space Environment Services Center (SESC) to help provide real-time monitoring and forecasting of the state of the near earth environment and its disturbances, and to maintain a source of reliable information to research and operational activities of a variety of users

Estimating an appropriate sampling frequency for monitoring ground water well contamination

International Nuclear Information System (INIS)

Tuckfield, R.C.

1994-01-01

Nearly 1,500 ground water wells at the Savannah River Site (SRS) are sampled quarterly to monitor contamination by radionuclides and other hazardous constituents from nearby waste sites. Some 10,000 water samples were collected in 1993 at a laboratory analysis cost of $10,000,000. No widely accepted statistical method has been developed, to date, for estimating a technically defensible ground water sampling frequency consistent and compliant with federal regulations. Such a method is presented here based on the concept of statistical independence among successively measured contaminant concentrations in time

Results of Monitoring at Olkiluoto in 2006. Environment

International Nuclear Information System (INIS)

Haapanen, R.

2007-07-01

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2006. This is the third annual report. The environmental monitoring system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for monitoring the state of the environment during the construction (and later operation) of ONKALO underground characterization facility. Although some of the nuclear power production related monitoring studies by TVO (the power company) have been going on from the 1970s, the repository-related environmental monitoring of Olkiluoto Island has only recently been comprehensive. Consequently, the first Biosphere Description Report was written in 2006. This work further produced some analyses belonging to the environmental monitoring programme, namely the estimates of biomass in terrestrial vegetation (forests) and a preliminary estimate of the biomass in terrestrial fauna (moose). In the monitoring data, the ongoing construction work (OL3, ONKALO and related infrastructure) is seen for instance in raised noise levels and deposition of base cations and iron. The land-use continues to change, but where there is natural environment, it resembles other coastal locations. The nearby marine environment is affected by the cooling water from the nuclear power plant. (orig.)

Thermoexoemission detectors for monitoring radioactive contamination of industrial waste waters

International Nuclear Information System (INIS)

Obukhov, V.T.; Sobolev, I.A.; Khomchik, L.M.

1987-01-01

Detectors on base of BeO(Na) monocrystals with thermoemission to be used for monitoring radioactive contamination of industrial waste waters are suggested. The detectors advantages are sensitivity to α and low-ehergy β radiations, high mechanical strength and wide range of measurements. The main disadvantage is the necessity of working in red light

An Evaluation of Antifungal Agents for the Treatment of Fungal Contamination in Indoor Air Environments

OpenAIRE

Rogawansamy, Senthaamarai; Gaskin, Sharyn; Taylor, Michael; Pisaniello, Dino

2015-01-01

Fungal contamination in indoor environments has been associated with adverse health effects for the inhabitants. Remediation of fungal contamination requires removal of the fungi present and modifying the indoor environment to become less favourable to growth.  This may include treatment of indoor environments with an antifungal agent to prevent future growth. However there are limited published data or advice on chemical agents suitable for indoor fungal remediation. The aim of this study wa...

Scanning personnel for internal deposition of radioactive material with personnel contamination whole body friskers and portal monitors

International Nuclear Information System (INIS)

Lobdell, J.L.

1996-01-01

The potential for using personnel contamination devices such as whole body friskers and portal monitors for internal contamination monitoring was evaluated. Internally deposited radioactive material is typically determined with whole body counting systems. Whole body counts have traditionally been performed on personnel when they report for work, on a periodic basis (i.e., annually), when an uptake is suspected, and on termination. These counts incur significant expense. The monitored personnel pass through whole body friskers and portal monitors daily. This investigation was performed to determine if the external contamination monitors could provide an alternative to the more Costly whole body counting. The ability to detect 1% of a DAC for critical radioisotopes was applied as a detection criteria for this investigation. The results of whole body counts were used to identify the typical internal contamination radionuclides. From this list, the radioisotopes that would be the most difficult to measure were identified. From this review, 60 Co and 131 I were determined to be the critical radionuclides. One percent of a DAC for each isotope was placed, one at a time, in a humanoid phantom. The phantom was placed in the whole body frisker and open-quotes countedclose quotes. The phantom was carried through the portal monitor at a speed equivalent to a person walking through the monitor. Frequency of detection was derived for both systems. Practical aspects of integrating this screening system with traditional internal dosimetry programs are discussed

COPING WITH CONTAMINATED SEDIMENTS AND SOILS IN THE URBAN ENVIRONMENT.

Energy Technology Data Exchange (ETDEWEB)

JONES,K.W.; VAN DER LELIE,D.; MCGUIGAN,M.; ET AL.

2004-05-25

Soils and sediments contaminated with toxic organic and inorganic compounds harmful to the environment and to human health are common in the urban environment. We report here on aspects of a program being carried out in the New York/New Jersey Port region to develop methods for processing dredged material from the Port to make products that are safe for introduction to commercial markets. We discuss some of the results of the program in Computational Environmental Science, Laboratory Environmental Science, and Applied Environmental Science and indicate some possible directions for future work. Overall, the program elements integrate the scientific and engineering aspects with regulatory, commercial, urban planning, local governments, and community group interests. Well-developed connections between these components are critical to the ultimate success of efforts to cope with the problems caused by contaminated urban soils and sediments.

First annual report on the Biological Monitoring and Abatement Program at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Loar, J.M.; Amano, H.; Jimenez, B.D.; Kitchings, J.T.; Meyers-Schoene, L.; Mohrbacher, D.A.; Olsen, C.R.

1992-08-01

As a condition of the National Pollutant Discharge Elimination System (NPDES) permit issued to Oak Ridge National Laboratory (ORNL) on April 1, 1986, a Biological Monitoring and Abatement Program (BMAP) was developed for White Oak Creek (WOC); selected tributaries of WOC, including Fifth Creek, First Creek, Melton Branch, and Northwest Tributary; and the Clinch River. BMAP consists of seven major tasks that address both radiological and nonradiological contaminants in the aquatic and terrestrial environs on-site and the aquatic environs off-site. These tasks are (1) toxicity monitoring; (2) bioaccumulation monitoring of nonradiological contaminants in aquatic biota; (3) biological indicator studies; (4) instream ecological monitoring; (5) assessment of contaminants in the terrestrial environment; (6) radioecology of WOC and White Oak Lake (WOL); and (7) contaminant transport, distribution, and fate in the WOC embayment-Clinch River-Watts Bar Reservoir system. This document, the first of a series of annual reports presenting the results of BMAP, describes studies that were conducted from March through December 1986

First annual report on the Biological Monitoring and Abatement Program at Oak Ridge National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Loar, J. M. [ed.; Adams, S. M.; Blaylock, B. G.; Boston, H. L.; Frank, M. L.; Garten, C. T.; Houston, M. A.; Kimmel, B. L.; Ryon, M. G.; Smith, J. G.; Southworth, G. R.; Stewart, A. J.; Walton, B. T.; Berry, J. B.; Talmage, S. S. [Oak Ridge National Lab., TN (United States); Amano, H. [JAERI, Tokai Res., Establishment, Ibari-Ken (Japan); Jimenez, B. D. [School of Pharmacy, Univ. of Puerto Rico (San Juan); Kitchings, J. T. [ERCE, Denver, CO (United States); Meyers-Schoene, L. [Advanced Sciences, Inc., Fernald, OH (United States); Mohrbacher, D. A. [Univ. of Tennessee, Knoxville, TN (United States); Olsen, C. R. [USDOE Office of Energy Research, Washington, DC (United States). Office of Health and Environmental Research

1992-08-01

As a condition of the National Pollutant Discharge Elimination System (NPDES) permit issued to Oak Ridge National Laboratory (ORNL) on April 1, 1986, a Biological Monitoring and Abatement Program (BMAP) was developed for White Oak Creek (WOC); selected tributaries of WOC, including Fifth Creek, First Creek, Melton Branch, and Northwest Tributary; and the Clinch River. BMAP consists of seven major tasks that address both radiological and nonradiological contaminants in the aquatic and terrestrial environs on-site and the aquatic environs off-site. These tasks are (1) toxicity monitoring; (2) bioaccumulation monitoring of nonradiological contaminants in aquatic biota; (3) biological indicator studies; (4) instream ecological monitoring; (5) assessment of contaminants in the terrestrial environment; (6) radioecology of WOC and White Oak Lake (WOL); and (7) contaminant transport, distribution, and fate in the WOC embayment-Clinch River-Watts Bar Reservoir system. This document, the first of a series of annual reports presenting the results of BMAP, describes studies that were conducted from March through December 1986.

Investigations on potential bacteria for the bioremediation treatment of environments contaminated with hydrocarbons

Energy Technology Data Exchange (ETDEWEB)

Lazar, I.; Voicu, A.; Dobrota, S.; Stefanescu, M. [Institute of Biology of Romanian Academy, Bucharest (Romania)] [and others

1995-12-31

In Romania after more than 135 years of oil production and processing, some severe environmental pollution problems have accumulated. In this context a joint research group from Institute of Biology Bucharest and S.C. Petrostar S.A. Ploiesti became involved in a research project on bioremediation of an environment contaminated with hydrocarbon waste. In the first stage of this project, investigations on microbial communities occurring in environments contaminated with oil were carried out. In the second stage, the hundreds of bacterial strains and populations isolated from soils, slops, and water sites contaminated with waste oil and water waste oil mix were submitted to a screening program, to select a naturally occurring mixed culture with a high ability to degrade hydrocarbons.

Rapid monitoring of large groups of internally contaminated people following a radiation accident

International Nuclear Information System (INIS)

1994-05-01

In the management of an emergency, it is necessary to assess the radiation exposures of people in the affected areas. An essential component in the programme is the monitoring of internal contamination. Existing fixed installations for the assessment of incorporated radionuclides may be of limited value in these circumstances because they may be inconveniently sited, oversensitive for the purpose, or inadequately equipped and staffed to cope with the large numbers referred to them. The IAEA considered it important to produce guidance on rapid monitoring of large groups of internally contaminated people. The purpose of this document is to provide Member States with an overview on techniques that can be applied during abnormal or accidental situations. Refs and figs

Evaluation of natural attenuation processes in the groundwater of a tar oil contaminated site: development of a monitoring network

International Nuclear Information System (INIS)

Borke, P.; Husers, N.; Werner, P.; Leibenath, C.

2005-01-01

Tar oil is a complex mixture of mainly aromatic hydrocarbons. It is found in the subsurface of manufactured gas plants (MGP), coking plants or wood preserving facilities. The transportation into the soil and groundwater stands for a severe contamination. This is due to the physico-chemical properties of the DNAPL (dense non aqueous phase liquid) and its mobility in the soil and aquifer system. Additionally most of the contaminants show a low biological degradability and solubility under in situ conditions. Therefore it is known as a long term source of contamination. Nevertheless, natural attenuation (NA) processes are detectable at tar oil contaminated sites. In the thematic network two of the German funding priority KORA (http://www.natural-attenuation.de) these processes are matter of investigation. Four typical contaminated sites were chosen to evaluate under which circumstances monitored natural attenuation (MNA) is applicable. Furthermore enhanced natural attenuation questions are examined. The design of monitoring networks at tar oil contaminated sites plays a significant role in gaining field evidence for natural attenuation as well as documenting the efficiency of the attenuation processes and evaluating the matching of performance goals. Well designed monitoring networks include the placement of monitoring wells in 3D so that 3D flow path, mass balances and an estimation of mass flux can be monitored. As an example the history of the monitoring network of a wood preserving facility is shown. Starting from a risk assessment network to a network for MNA is presented. In this case for example especially the determination of the groundwater flow direction in time and space is connected to the number of observation wells and their location. Moreover in the beginning the observation wells were located according to the assumed centerline of the plume. Because of the variability of the groundwater flow direction and the need to determine mass flux a control plane

Contamination monitor as a nuclear stethoscope for community nuclear medicine

International Nuclear Information System (INIS)

Rehani, M.M.; Sharma, S.K.; Sharma, R.R.

1979-01-01

A portable contamination monitor has been modified for use as an in vivo counting probe. The evaluation by physical parameters and clinical studies shows its suitability for a variety of diagnostic studies. The correlation equations for thyroid uptake measurement have been worked out for whole range of values. Its use as a versatile nuclear stethoscope is envisaged. (author)

Air contamination control as an element of state environmental monitoring

International Nuclear Information System (INIS)

Grabowski, D.

1993-01-01

The results of air contamination control on the base of gamma and beta radioactivity of aerosols collected on filters and in precipitation samples have been shown. The data have been gathered from 12 monitoring stations in Poland during 1993. No significant differences between actual results and those obtained in previous years have been noticed. 4 figs, 1 tab

Unmanned aerial vehicles for the assessment and monitoring of environmental contamination: An example from coal ash spills.

Science.gov (United States)

Messinger, Max; Silman, Miles

2016-11-01

Unmanned aerial vehicles (UAVs) offer new opportunities to monitor pollution and provide valuable information to support remediation. Their low-cost, ease of use, and rapid deployment capability make them ideal for environmental emergency response. Here we present a UAV-based study of the third largest coal ash spill in the United States. Coal ash from coal combustion is a toxic industrial waste material present worldwide. Typically stored in settling ponds in close proximity to waterways, coal ash poses significant risk to the environment and drinking water supplies from both chronic contamination of surface and ground water and catastrophic pond failure. We sought to provide an independent estimate of the volume of coal ash and contaminated water lost during the rupture of the primary coal ash pond at the Dan River Steam Station in Eden, NC, USA and to demonstrate the feasibility of using UAVs to rapidly respond to and measure the volume of spills from ponds or containers that are open to the air. Using structure-from-motion (SfM) imagery analysis techniques, we reconstructed the 3D structure of the pond bottom after the spill, used historical imagery to estimate the pre-spill waterline, and calculated the volume of material lost. We estimated a loss of 66,245 ± 5678 m 3 of ash and contaminated water. The technique used here allows rapid response to environmental emergencies and quantification of their impacts at low cost, and these capabilities will make UAVs a central tool in environmental planning, monitoring, and disaster response. Copyright © 2016 Elsevier Ltd. All rights reserved.

Applications of Wireless Sensor Networks in Marine Environment Monitoring: A Survey

Science.gov (United States)

Xu, Guobao; Shen, Weiming; Wang, Xianbin

2014-01-01

With the rapid development of society and the economy, an increasing number of human activities have gradually destroyed the marine environment. Marine environment monitoring is a vital problem and has increasingly attracted a great deal of research and development attention. During the past decade, various marine environment monitoring systems have been developed. The traditional marine environment monitoring system using an oceanographic research vessel is expensive and time-consuming and has a low resolution both in time and space. Wireless Sensor Networks (WSNs) have recently been considered as potentially promising alternatives for monitoring marine environments since they have a number of advantages such as unmanned operation, easy deployment, real-time monitoring, and relatively low cost. This paper provides a comprehensive review of the state-of-the-art technologies in the field of marine environment monitoring using wireless sensor networks. It first describes application areas, a common architecture of WSN-based oceanographic monitoring systems, a general architecture of an oceanographic sensor node, sensing parameters and sensors, and wireless communication technologies. Then, it presents a detailed review of some related projects, systems, techniques, approaches and algorithms. It also discusses challenges and opportunities in the research, development, and deployment of wireless sensor networks for marine environment monitoring. PMID:25215942

Development and Application of Devices for Remote Monitoring of Gamma-Ray Contamination at RECOM Ltd

International Nuclear Information System (INIS)

Ivanov, O.P.; Stepanov, V.E.; Chesnokov, A.V.; Sudarkin, A.N.; Urutskoev, L.I.

1999-01-01

Devices for remote monitoring of gamma-ray contamination develop at RECOM Ltd. are described and typical examples of their application are show. The following devices are discussed: spectrum-sensitive collimated devices for mapping of radioactivity on contaminated surfaces- scanning collimated Gamma Locator, device for field Cs-137 contamination mapping-CORAD; devices for gamma-ray imaging computer-controlled High-Energy Radiation Visualizer (HERV) and Coded Mask Imager

Radioactive contamination in the environs of the Hanford Works for the period October, November, December 1949

Energy Technology Data Exchange (ETDEWEB)

Paas, H.J.; Singlevich, W.

1950-03-02

This report summarizes the measurements made for radioactive contamination in the environs of the Hanford Works. The principal sources of the radioactivity originating as a result of operations at Hanford which affect the environment in this area are the two waste stacks in the separations area and the cooling water from the four pile areas. Measurements are also made on samples taken from the Hanford waste systems which are primarily confined within the project proper. Although monthly summaries of these data are reported in Health Instrument Divisions Environs reports, a somewhat more detailed discussion of these data is covered in the quarterly report. In this manner, a better evaluation of possible trends can be detected as a result of the increased number of measurements made available by combining the data for a three month period. The following areas are discussed: meteorology, radioactive contamination of vegetation, airborne contamination and air radiation levels, radioactive contamination in Hanford wastes, radioactive contamination in the Columbia and Yakima rivers; beta activity in rain and snow, and radioactive contamination in drinking water and test wells.

The Opera Instrument: An Advanced Curation Development for Mars Sample Return Organic Contamination Monitoring

Science.gov (United States)

Fries, M. D.; Fries, W. D.; McCubbin, F. M.; Zeigler, R. A.

2018-01-01

Mars Sample Return (MSR) requires strict organic contamination control (CC) and contamination knowledge (CK) as outlined by the Mars 2020 Organic Contamination Panel (OCP). This includes a need to monitor surficial organic contamination to a ng/sq. cm sensitivity level. Archiving and maintaining this degree of surface cleanliness may be difficult but has been achieved. MSR's CK effort will be very important because all returned samples will be studied thoroughly and in minute detail. Consequently, accurate CK must be collected and characterized to best interpret scientific results from the returned samples. The CK data are not only required to make accurate measurements and interpretations for carbon-depleted martian samples, but also to strengthen the validity of science investigations performed on the samples. The Opera instrument prototype is intended to fulfill a CC/CK role in the assembly, cleaning, and overall contamination history of hardware used in the MSR effort, from initial hardware assembly through post-flight sample curation. Opera is intended to monitor particulate and organic contamination using quartz crystal microbalances (QCMs), in a self-contained portable package that is cleanroom-compliant. The Opera prototype is in initial development capable of approximately 100 ng/sq. cm organic contamination sensitivity, with additional development planned to achieve 1 ng/sq. cm. The Opera prototype was funded by the 2017 NASA Johnson Space Center Innovation Charge Account (ICA), which provides funding for small, short-term projects.

Theoretical considerations on design and analysis of monitoring systems for Pu-contaminated solid wastes

International Nuclear Information System (INIS)

Notea, A.

1979-01-01

Monitoring systems for plutonium contaminated wastes refers to both managerial regulations and instrumental hardware. Its design is inseparable from the design of the production line in the fuel handling facility, and depends on the general wastes management program. Characteristic functions of the monitors are discussed and the necessity of reference monitors is stressed. The reference monitor enables the formation of a quality scale. Guidelines for future R and D efforts are suggested

Minimizing Sources of Airborne, Aerosolized, and Contact Contaminants in the OR Environment.

Science.gov (United States)

Armellino, Donna

2017-12-01

Surgical site infections are unintended consequences of surgery that can cause harm to patients and place financial burdens on health care organizations. Extrinsic factors in the OR-including health care providers' behavior and practices that modify air movement, the physical environment, equipment, or surgical instruments-can increase microbial contamination. Microbes can be transported into the surgical incision by airborne or contact routes and contribute to a surgical site infection. Simple practices to prevent infection-such as minimizing airborne particles and contaminants, maintaining equipment according to the manufacturer's recommendations, cleaning and disinfecting the environment and surgical instruments, and performing proper hand hygiene-can reduce the degree of microbial contamination. Perioperative leaders and health care providers can help decrease the patient's risk of surgical site infection with proactive preventive practices that break the chain of infection. Copyright © 2017 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Behavioral response to contamination risk information in a spatially explicit groundwater environment: Experimental evidence

Science.gov (United States)

Li, Jingyuan; Michael, Holly A.; Duke, Joshua M.; Messer, Kent D.; Suter, Jordan F.

2014-08-01

This paper assesses the effectiveness of aquifer monitoring information in achieving more sustainable use of a groundwater resource in the absence of management policy. Groundwater user behavior in the face of an irreversible contamination threat is studied by applying methods of experimental economics to scenarios that combine a physics-based, spatially explicit, numerical groundwater model with different representations of information about an aquifer and its risk of contamination. The results suggest that the threat of catastrophic contamination affects pumping decisions: pumping is significantly reduced in experiments where contamination is possible compared to those where pumping cost is the only factor discouraging groundwater use. The level of information about the state of the aquifer also affects extraction behavior. Pumping rates differ when information that synthesizes data on aquifer conditions (a "risk gauge") is provided, despite invariant underlying economic incentives, and this result does not depend on whether the risk information is location-specific or from a whole aquifer perspective. Interestingly, users increase pumping when the risk gauge signals good aquifer status compared to a no-gauge treatment. When the gauge suggests impending contamination, however, pumping declines significantly, resulting in a lower probability of contamination. The study suggests that providing relatively simple aquifer condition guidance derived from monitoring data can lead to more sustainable use of groundwater resources.

Monitoring of radioactivity in the environs of Finnish nuclear power stations in 1987

International Nuclear Information System (INIS)

Sjoeblom, K.-L.; Klemola, S.; Ilus, E.; Arvela, H.; Blomqvist, L.

1989-06-01

Results of the environmental programmes for monitoring radioactive contamination around Finnish nuclear power plants in 1987 are reported. Fallout from the Chernobyl accident, which took place in April 1986, was still dominating the artificial radiation situation in Finland. Thus, large amounts of 137 Cs and other long-lived fallout nuclides predominated in the environmental samples taken in the vicinity of nuclear power plants. The extremely small airborne releases from Finnish nuclear power plants were almost totally covered by fallout nuclides. The somewhat higher aquatic releases were easier to distinguish, and it was possible to follow their spread in the marine environment. The contribution of locally discharged nuclides to radiation doses of the population was insignificant

An overview of existing raptor contaminant monitoring activities in Europe

NARCIS (Netherlands)

Gomez-Ramirez, P.; Shore, R.F.; Brink, van den N.W.; Hattum, van B.; Bustnes, J.O.; Duke, G.; Fritsch, C.; Garcia-Fernandez, A.J.; Helander, B.O.; Jaspers, V.; Krone, O.; Martinez-Lopez, E.; Mateo, R.; Movalli, P.; Sonne, C.

2014-01-01

Biomonitoring using raptors as sentinels can provide early warning of the potential impacts of contaminants on humans and the environment and also a means of tracking the success of associated mitigation measures. Examples include detection of heavy metal-induced immune system impairment,

Integrated site investigation and groundwater monitoring in an urban environment

Science.gov (United States)

Weatherl, R. K.

2017-12-01

Understanding groundwater dynamics around cities and other areas of human influence is of crucial importance for water resource management and protection, especially in a time of environmental and societal change. The human environment presents a unique challenge in terms of hydrological characterization, as the water cycle is generally artificialized and emissions of treated waste and chemical products into the surface- and groundwater system tend to disrupt the natural aqueous signature in significant ways. This project presents an integrated approach for robust characterization and monitoring of an urban aquifer which is actively exploited for municipal water supply. The study is carried out in the town of Fehraltorf, in the canton of Zürich, Switzerland. This particular town encompasses industrial and agricultural zones in addition to its standard urban setting. A minimal amount of data exist at this site, and the data that do exist are spatially and temporally sparse. Making use of traditional hydrogeological methods alongside evolving and emerging technologies, we aim to identify sources of contamination and to define groundwater flow and solute transport through space and time. Chemical and physical indicator parameters are identified for tracing contaminations including micropollutants and plant nutrients. Wireless sensors are installed for continuous on-line monitoring of essential parameters (electrical conductivity, temperature, water level). A wireless sensor network has previously been installed in the sewer system of the study site, facilitating investigation into interactions between sewer water and groundwater. Our approach illustrates the relations between land use, climate, rainfall dynamics, and the groundwater signature through time. At its conclusion, insights gained from this study will be used by municipal authorities to refine protective zones around pumping wells and to direct resources towards updating practices and replacing

International systems for harmonization and quality control by in vivo monitoring and quality control by in vivo monitoring of internal contamination

Energy Technology Data Exchange (ETDEWEB)

Malatova, I [National Radiation Protection Inst., Prague (Czech Republic)

1996-12-31

After the Chernobyl accident, whole body counting for the monitoring of internal contamination of the population was widely used. In many cases, great discrepancy occurred between in vivo measured values and predicted ones from model calculations. This situation was very similar to the situation in environmental monitoring, however, by sample measurement, quality assurance and quality control of the measurement procedure is much easier than by whole body counting. In addition to it, unlike in environmental monitoring, use of semiconductor detectors by whole counting was rather limited in this time so there were few laboratories which were able to distinguish up to 20 radionuclides by which people from the vicinity of Chernobyl were internally contaminated. Therefore, effort was undertaken by many international organization to summarize current status of whole body counting and to estimate uncertainty and sensitivity of different devices. In this paper efforts to harmonize an interpretation of measured results is given. Whole body counting laboratory of the National Radiation Protection Institute (NRPI) in Prague participates in the above mentioned intercomparisons with good results and scientists from NRPI have participated in the preparation of 3 international recommendations concerning measurement of internal contamination (author).

The role of environmental biotechnology in exploring, exploiting, monitoring, preserving, protecting and decontaminating the marine environment.

Science.gov (United States)

Kalogerakis, Nicolas; Arff, Johanne; Banat, Ibrahim M; Broch, Ole Jacob; Daffonchio, Daniele; Edvardsen, Torgeir; Eguiraun, Harkaitz; Giuliano, Laura; Handå, Aleksander; López-de-Ipiña, Karmele; Marigomez, Ionan; Martinez, Iciar; Øie, Gunvor; Rojo, Fernando; Skjermo, Jorunn; Zanaroli, Giulio; Fava, Fabio

2015-01-25

In light of the Marine Strategy Framework Directive (MSFD) and the EU Thematic Strategy on the Sustainable Use of Natural Resources, environmental biotechnology could make significant contributions in the exploitation of marine resources and addressing key marine environmental problems. In this paper 14 propositions are presented focusing on (i) the contamination of the marine environment, and more particularly how to optimize the use of biotechnology-related tools and strategies for predicting and monitoring contamination and developing mitigation measures; (ii) the exploitation of the marine biological and genetic resources to progress with the sustainable, eco-compatible use of the maritime space (issues are very diversified and include, for example, waste treatment and recycling, anti-biofouling agents; bio-plastics); (iii) environmental/marine biotechnology as a driver for a sustainable economic growth. Copyright © 2014 Elsevier B.V. All rights reserved.

Emerging contaminants in the environment: Risk-based analysis for better management.

Science.gov (United States)

Naidu, Ravi; Arias Espana, Victor Andres; Liu, Yanju; Jit, Joytishna

2016-07-01

Emerging contaminants (ECs) are chemicals of a synthetic origin or deriving from a natural source that has recently been discovered and for which environmental or public health risks are yet to be established. This is due to limited available information on their interaction and toxicological impacts on receptors. Several types of ECs exist such as antibiotics, pesticides, pharmaceuticals, personal care products, effluents, certain naturally occurring contaminants and more recently nanomaterials. ECs may derive from a known source, for example released directly to the aquatic environment from direct discharges such as those from wastewater treatment plants. Although in most instances the direct source cannot be identified, ECs have been detected in virtually every country's natural environment and as a consequence they represent a global problem. There is very limited information on the fate and transport of ECs in the environment and their toxicological impact. This lack of information can be attributed to limited financial resources and the lack of analytical techniques for detecting their effects on ecosystems and human health on their own or as mixture. We do not know how ECs interact with each other or various contaminants. This paper presents an overview of existing knowledge on ECs, their fate and transport and a risk-based analysis for ECs management and complementary strategies. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessment and prediction of the scales of radioactive contamination of the environment by emissions from a nuclear power plant

International Nuclear Information System (INIS)

Elokhin, A.P.; Solovei, A.F.

1995-01-01

The assessment of radioactive contamination of the air basin and underlying surface in the direction of emission reduces to determining the volume activity of the radioactive impurity in air, the surface activity on the underlying surface of the radioactive impurity is known at least approximately (for example, it can be set on the basis of the technological regulations at the nuclear power plant or according to the criterion of levels during an accident), by using exposure-dose-rate sensors in a network of posts of the automatic system for monitoring the radiation environment (ASMRE), which are placed on the industrial area of the nuclear power plant, in the shielded zone and in the observation zone, it is possible to determine more accurately the magnitude of the emission and, therefore, to estimate the scale of the radioactive contamination of the medium

PCDD/F and WHO-PCB contamination in an industrialized area in Brazil. First results of atmospheric monitoring and the use of Tillandsia usneoides (L) as biomonitor

Energy Technology Data Exchange (ETDEWEB)

Pereira, M. de S. [Dept. de Geoquimica, Univ. Federal Fluminense. Niteroi, RJ (Brazil); Waller, U.; Reifenhaeuser, W.; Koerner, W. [Bavarian Environmental Protection Agency, Augsburg (Germany); Torres, J.P.; Malm, O. [Inst. de Biofisica, CCS-UFRJ. Ilha do Fundao, RJ (Brazil)

2004-09-15

A major issue of concern in developing countries like Brazil is to conciliate increasing industrialization rates to secure health and environmental standards already required to promote the free market among countries. This was pointed out during the United Nations Conference on Environment and Development in Rio de Janeiro in 1992 (Agenda 21). There it became clear that Brazil needs to develop better methods and techniques for environmental monitoring in order to control pollution sources and promote sustainable development. Among dozens of different kinds of persistent organic pollutants, polychlorinated dibenzodioxins and dibenzofurans (PCDD/PCDF) and polychlorinated biphenyls (PCB) are a matter of great concern due to their persistence, bioaccumulation and toxicological properties. PCDD and PCDF are unwanted by-products from the combustion of organic material containing trace amounts of chlorine set free in both stationary thermal sources and diffuse fuel burning. They can also be present as unwanted by-products of various industrial and metallurgical processes and metal recycling and smelters. PCB are ubiquitous contaminants of the environment and can be produced during thermal processes. In spite of their high environmental persistence and relevance in human health concerns, legal aspects regarding maximum emission limits and control of these contaminants are absent in Brazil at present. Moreover, the absence of adequately equipped laboratories and human resources together with the high costs associated hampers the research and monitoring of these contaminants in Brazil. The present work is a first report of the monitoring of total deposition rates of PCDD/PCDF and PCB in Volta Redonda City, a highly industrialized area in Rio de Janeiro State. Simultaneously, the use of an endemic Bromeliad species, Tillandsia usneoides (L), an epiphytic bromeliad, as a possible bio-monitor for persistent organochlorine compounds was investigated.

Optimisation (sampling strategies and analytical procedures) for site specific environment monitoring at the areas of uranium production legacy sites in Ukraine - 59045

International Nuclear Information System (INIS)

Voitsekhovych, Oleg V.; Lavrova, Tatiana V.; Kostezh, Alexander B.

2012-01-01

There are many sites in the world, where Environment are still under influence of the contamination related to the Uranium production carried out in past. Author's experience shows that lack of site characterization data, incomplete or unreliable environment monitoring studies can significantly limit quality of Safety Assessment procedures and Priority actions analyses needed for Remediation Planning. During recent decades the analytical laboratories of the many enterprises, currently being responsible for establishing the site specific environment monitoring program have been significantly improved their technical sampling and analytical capacities. However, lack of experience in the optimal site specific sampling strategy planning and also not enough experience in application of the required analytical techniques, such as modern alpha-beta radiometers, gamma and alpha spectrometry and liquid-scintillation analytical methods application for determination of U-Th series radionuclides in the environment, does not allow to these laboratories to develop and conduct efficiently the monitoring programs as a basis for further Safety Assessment in decision making procedures. This paper gives some conclusions, which were gained from the experience establishing monitoring programs in Ukraine and also propose some practical steps on optimization in sampling strategy planning and analytical procedures to be applied for the area required Safety assessment and justification for its potential remediation and safe management. (authors)

Mussels and sediment as monitoring tools for contaminants: which to use when?

Science.gov (United States)

For decades, sediments and mussels have been used to assess the ecological and human health risks associated with concentrations of bioavailable organic and metal contaminants in a variety of coastal-wide and localized monitoring programs. Mussels (Mytilus edulis) bioaccumulate o...

Tethered Contactless Mobile Nuclear Environment Monitoring Robot

International Nuclear Information System (INIS)

Choi, S. Y.; Lee, E. S.; Lee, Kun J.; Kim, Su H.; Rim, C. T.

2013-01-01

In fact, the nuclear environment monitoring is significantly crucial for early detection of NPP accident, radiological emergency, the estimation of radiation exposure to nearby residents as well as the long term radioactivity. In the UAE, the nuclear environment monitoring is, however, quite challenging because sampling locations are far from NPPs and the outdoor temperature and humidity are very high for NPP workers to collect soil, air, and water samples. Therefore, nuclear environment monitoring robots (Nubos) are strongly needed for the NPPs in the UAE. The Nubos can be remotely controlled to collect samples in extreme environment instead of NPP workers. Moreover, the Nubos can be unmanned ground vehicles (UGVs), unmanned aerial vehicles (UAVs) and unmanned marine vehicles (UMVs) to collect soil, air, and water samples, respectively. In this paper, the prototype development of UGV type Nubos using power cable for a long distance power delivery, called Tethered contactless mobile Nubo is introduced and validated by experiments. In this paper, the prototype development of Tethered Contactless Mobile (TeCoM) Nubo, which can be powered continuously within several km distance and avoid tangled cable, and the indoor test are finished. As further works, outdoor demonstration and a grand scale R and D proposal of practical Nubo will be proceeded

Tethered Contactless Mobile Nuclear Environment Monitoring Robot

Energy Technology Data Exchange (ETDEWEB)

Choi, S. Y.; Lee, E. S.; Lee, Kun J.; Kim, Su H.; Rim, C. T. [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2013-05-15

In fact, the nuclear environment monitoring is significantly crucial for early detection of NPP accident, radiological emergency, the estimation of radiation exposure to nearby residents as well as the long term radioactivity. In the UAE, the nuclear environment monitoring is, however, quite challenging because sampling locations are far from NPPs and the outdoor temperature and humidity are very high for NPP workers to collect soil, air, and water samples. Therefore, nuclear environment monitoring robots (Nubos) are strongly needed for the NPPs in the UAE. The Nubos can be remotely controlled to collect samples in extreme environment instead of NPP workers. Moreover, the Nubos can be unmanned ground vehicles (UGVs), unmanned aerial vehicles (UAVs) and unmanned marine vehicles (UMVs) to collect soil, air, and water samples, respectively. In this paper, the prototype development of UGV type Nubos using power cable for a long distance power delivery, called Tethered contactless mobile Nubo is introduced and validated by experiments. In this paper, the prototype development of Tethered Contactless Mobile (TeCoM) Nubo, which can be powered continuously within several km distance and avoid tangled cable, and the indoor test are finished. As further works, outdoor demonstration and a grand scale R and D proposal of practical Nubo will be proceeded.

A model for dispersion of contaminants in the subway environment

Energy Technology Data Exchange (ETDEWEB)

Coke, L. R.; Sanchez, J. G.; Policastro, A. J.

2000-05-03

Although subway ventilation has been studied extensively, very little has been published on dispersion of contaminants in the subway environment. This paper presents a model that predicts dispersion of contaminants in a complex subway system. It accounts for the combined transient effects of train motion, station airflows, train car air exchange rates, and source release properties. Results are presented for a range of typical subway scenarios. The effects of train piston action and train car air exchange are discussed. The model could also be applied to analyze the environmental impact of hazardous materials releases such as chemical and biological agents.

Monitoring aquatic environment pollution: a major component of environment management systems

International Nuclear Information System (INIS)

Khan, I.H.; Khan, M.H.; Sheikh, I.M.

1999-01-01

The paper is based on the international experiences mostly of the UK (United Kingdom) and Europe on monitoring aquatic pollution and controlling water pollution which have a long history of the legislation involved. The U.K. control of water pollution and regulatory laws are very effective as in shown by the fact that 96 percent of rivers in England and Wales are suitable for potable supplies with conventional water treatment. Current British legislation is basically contained n the 1951, 1960 and 1974 acts of parliament in the U.K. A common feature of all this environment legislation is the high level of consultation which has taken place between government and all concerned and al those concerned in the development of legislation and drawing up regulations etc. and involved in implementation of them. Similarly considerable discussion takes place with the controlling authorities by dischargers over the detailed implementation of legislation in the U.K. Consequently these harmonious attitudes have been responsible for the effectiveness of the U.K. legislation. In the U.K. control of discharges of industrial effluents to sewers and to all natural waters including underground water is vested in the regional water authorities, which on application, issue consent permitting discharges of industrial effluents to sewers and to all natural waters including underground waters in vested in the regional water authorities, which on application, issue consent permitting discharges to be made subject to conditions and limitations in the consent/authorisation/approval. The paper critically reviews major aspects of the philosophy of aquatic pollution control and monitoring, as statistics reveal deadly state of liquid effluent contamination water bodies in Pakistan. Without prompt installation of treatment plants we may face a tragedy of catastrophic magnitude. (author)

Contaminant monitoring of hydraulic systems. The need for reliable data

Energy Technology Data Exchange (ETDEWEB)

Day, M.J. Rinkinen, J. [Pall Europe Ltd., Portsmouth (United Kingdom); Tampere University of Technology, Tampere (Finland)

1998-12-31

The need for both reliable operation of hydraulic and lubrication systems and long component lives has focused users to the benefits of controlling the contamination in the hydraulic fluid. Maximum operating (target) levels are being implemented as part of a condition based maintenance regime. If these are exceeded, maintenance effort is directed to correcting the rise in consummation level, and so make optimum use of resources as maintenance effort is only affected when it is necessary to do so. Fundamental to ibis aspect of condition based monitoring is the provision of accurate and reliable data in the shortest possible time. This way, corrective actions can be implemented immediately so minimising the damage to components. On-line monitoring devices are a way of achieving this and are seeing increased use, but some are affected by the condition of the fluid. Hence, there is a potential for giving incorrect data which will waste time and effort by initiating unnecessary corrective actions. A more disturbing aspect is the effect on the user of continual errors. The most likely effect would be a loss of confidence in the technique or even complete rejection of it and hence the potential benefits will be lost. This presentation explains how contaminant monitoring techniques are applied to ensure that the potential benefits of operating with clean fluids is realised. It examines the sources of error and shows how the user can interrogate the data and satisfy himself of its authenticity. (orig.) 14 refs.

Contaminant monitoring of hydraulic systems. The need for reliable data

Energy Technology Data Exchange (ETDEWEB)

Day, M.J. [Pall Europe Ltd., Portsmouth (United Kingdom)] Rinkinen, J. [Tampere University of Technology, Tampere (Finland)

1997-12-31

The need for both reliable operation of hydraulic and lubrication systems and long component lives has focused users to the benefits of controlling the contamination in the hydraulic fluid. Maximum operating (target) levels are being implemented as part of a condition based maintenance regime. If these are exceeded, maintenance effort is directed to correcting the rise in consummation level, and so make optimum use of resources as maintenance effort is only affected when it is necessary to do so. Fundamental to ibis aspect of condition based monitoring is the provision of accurate and reliable data in the shortest possible time. This way, corrective actions can be implemented immediately so minimising the damage to components. On-line monitoring devices are a way of achieving this and are seeing increased use, but some are affected by the condition of the fluid. Hence, there is a potential for giving incorrect data which will waste time and effort by initiating unnecessary corrective actions. A more disturbing aspect is the effect on the user of continual errors. The most likely effect would be a loss of confidence in the technique or even complete rejection of it and hence the potential benefits will be lost. This presentation explains how contaminant monitoring techniques are applied to ensure that the potential benefits of operating with clean fluids is realised. It examines the sources of error and shows how the user can interrogate the data and satisfy himself of its authenticity. (orig.) 14 refs.

Monitoring Potential Transport of Radioactive Contaminants in Shallow Ephemeral Channels: FY2015 and FY2016

Energy Technology Data Exchange (ETDEWEB)

Mizell, Steve A [Desert Research Inst. (DRI), Las Vegas, NV (United States); Miller, Julianne J [Desert Research Inst. (DRI), Las Vegas, NV (United States); McCurdy, Greg [Desert Research Inst. (DRI), Las Vegas, NV (United States); Campbell, Scott A [Desert Research Inst. (DRI), Las Vegas, NV (United States)

2017-10-01

The Desert Research Institute (DRI) is conducting a field assessment of the potential for contaminated soil to be transported from the Smoky Contamination Area (CA) as a result of storm runoff. This activity supports Nevada Nuclear Security Administration (NNSA) efforts to complete regulatory closure of the Soils Corrective Action Unit (CAU) contamination areas. The work is intended to confirm the likely mechanism of transport and determine the meteorological conditions that might cause movement of contaminated soils, as well as determine the particle size fraction that is most closely associated with transported radionuclide-contaminated soils. These data will facilitate the appropriate closure design and post-closure monitoring program.

Application Of The SPV-based Surface Lifetime Technique To In-Line Monitoring Of Surface Cu Contamination

Science.gov (United States)

D'Amico, John; Savtchouk, Alexandre; Wilson, Matthew; Kim, Chul Hong; Yoo, Hyung Won; Lee, Chang Hwan; Kim, Tae Kyoung; Son, Sang Hoon

2009-09-01

Implementation of Cu interconnects into Silicon Integrated Circuits (IC's) has been instrumental in the continuing improvement of IC device performance. Copper as a well known Gate Oxide Integrity (GOI) killer [1, 2] requires extensive protocols to minimize the possibility of cross contamination. Despite such protocols the risk for cross contamination exists, and consequently there is the need for in-line Cu cross-contamination detection metrology. Preferably the metrology will be non-destructive, fast, and capable of mapping on product wafers. Up to now the most common approaches for monitoring Cu contamination in IC fabrication lines either measure Cu in the bulk Si, which is not applicable to Cu cross-contamination monitoring because Back-End-of-the-Line thermal budgets restrict the ability to diffuse the surface Cu into the bulk Si; or the techniques are not optimal for in-line monitoring due to their destructive, time-consuming, or costly nature. In this work we demonstrate for the first time the application of the ac-Surface Photo Voltage (ac-SPV) surface lifetime approach [3] to in-line, full wafer coverage mapping of low level (metrology system. Furthermore, because the metrology is non-contact (utilizing edge-grip handling) and non-destructive, it is directly applicable to measurement of production wafers. In-line fab data acquired using this metrology is presented and compared to data from Inductively Coupled Plasma Mass Spectroscopy (ICP-MS).

Radioactive discharges and monitoring of the environment 1988

International Nuclear Information System (INIS)

1989-01-01

This annual report on Radioactive Discharges and Monitoring the Environment, 1988, summarises the programmes of Sellafield, Drigg, Chapelcross, Springfields and Capenhurst for monitoring the discharges of radioactive materials to the sea and the environment. Critical groups and environmental exposure pathways are identified and collective doses to these groups estimated. The disposal of radioactive wastes at each site is discussed. Certificates of authorisation are presented. A summary of recommended doses of specific radionuclides is given. (Author)

The effects of monitoring environment on problem-solving performance.

Science.gov (United States)

Laird, Brian K; Bailey, Charles D; Hester, Kim

2018-01-01

While effective and efficient solving of everyday problems is important in business domains, little is known about the effects of workplace monitoring on problem-solving performance. In a laboratory experiment, we explored the monitoring environment's effects on an individual's propensity to (1) establish pattern solutions to problems, (2) recognize when pattern solutions are no longer efficient, and (3) solve complex problems. Under three work monitoring regimes-no monitoring, human monitoring, and electronic monitoring-114 participants solved puzzles for monetary rewards. Based on research related to worker autonomy and theory of social facilitation, we hypothesized that monitored (versus non-monitored) participants would (1) have more difficulty finding a pattern solution, (2) more often fail to recognize when the pattern solution is no longer efficient, and (3) solve fewer complex problems. Our results support the first two hypotheses, but in complex problem solving, an interaction was found between self-assessed ability and the monitoring environment.

Roshydromet system of environment radioactive contamination monitoring in the Arctic region of Russia

International Nuclear Information System (INIS)

Chelukanov, V.

1995-01-01

159 arctic hydrometerological stations take measurements of gamma radiation. 51 stations monitor the density of atmospheric radioactive fallout and 12 stations monitor the concentration of aerosols. 13 hydrological stations sited in the mouths of main Arctic Ocean rivers take water samples. Regional laboratories carry out isotop analysis of samples. Information on high levels of a radioactivity measured at the monitoring stations, as well as information on abnormal radioactivity from regional laboratories are transmitted to the Information Centers on the monitoring system (Moscow and Obnisk) by cable. 2 figs., 1 tab

The monitoring of radioactivity in the environment

International Nuclear Information System (INIS)

1986-01-01

35 separately indexed lectures are discussed of this conference. The contents of the individual contributions cover the following areas: 1) Monitoring networks and guidelines; 2) Monitoring equipment and methods; 3) Development of models for radionuclide migration, and 4) Individual determination and analysis of radionuclides relevant to the environment. (PW) [de

Air monitoring data reveal previously unknown contamination at radioactive waste disposal area, Los Alamos National Laboratory

International Nuclear Information System (INIS)

Kraig, D.H.; Conrad, R.C.

2000-01-01

Air monitoring at Area G, the low-level radioactive waste disposal area at Los Alamos National Laboratory, revealed increased air concentrations of 239 Pu and 241 Am at one location along the north boundary. This air monitoring location is a couple of meters north of a dirt road used to access the easternmost part of Area G. Air concentrations of 238 Pu were essentially unaffected which was puzzling because both 238 Pu and 239 Pu are present in the local, slightly contaminated soils. Air concentrations of these radionuclides increased about a factor of ten in early 1995 and remained at those levels until the first quarter of 1996. During the spring of 1996 air concentrations again increased by a factor of about ten. No other radionuclides were elevated, and no other Area G stations showed elevations of these radionuclides. After several formal meetings did not provide an adequate explanation for the elevations, a gamma-survey was performed and showed a small area of significant contamination just south of the monitor location. We found that in February 1995, a trench for a water line had been dug within a meter or so of the air stations. Then, during early 1996, the dirt road was rerouted such that its new path was directly over the unknown contamination. It appears that the trenching brought contaminated material to the surface and caused the firs rise in air concentrations and then the rerouting of the road over the contamination caused the second rise, during 1996. We also found that during 1976 and 1977 contaminated soils from the clean-up of an old processing facility had been spread over the filled pits in the vicinity of the air monitors. These soils, which were probably the source of the air contamination, were very low in 238 Pu which explains why we saw very little 238 Pu in the increased air concentrations. A layer of gravel and sand was spread over the contaminated area. Although air concentrations of 239 Pu and 241 Am dropped considerably, they have

In Situ Monitoring of Groundwater Contamination Using the Kalman Filter For Sustainable Remediation

Science.gov (United States)

Schmidt, F.; Wainwright, H. M.; Faybishenko, B.; Denham, M. E.; Eddy-Dilek, C. A.

2017-12-01

Sustainable remediation - based on less intensive passive remediation and natural attenuation - has become a desirable remediation alternative at contaminated sites. Although it has a number of benefits, such as reduced waste and water/energy usage, it carries a significant burden of proof to verify plume stability and to ensure insignificant increase of risk to public health. Modeling of contaminant transport is still challenging despite recent advances in numerical methods. Long-term monitoring has, therefore, become a critical component in sustainable remediation. However, the current approach, which relies on sparse groundwater sampling, is problematic, since it could miss sudden significant changes in plume behavior. A new method is needed to combine existing knowledge about contaminant behavior and latest advances in in situ groundwater sensors. This study presents an example of the effective use of the Kalman filter approach to estimate contaminant concentrations, based on in situ measured water quality parameters (e.g. electrical conductivity and pH) along with the results of sparse groundwater sampling. The Kalman filter can effectively couple physical models and data correlations between the contaminant concentrations and in situ measured variables. We aim (1) to develop a framework capable of integrating different data types to provide accurate contaminant concentration estimates, (2) to demonstrate that these results remain reliable, even when the groundwater sampling frequency is reduced, and (3) to evaluate the future efficacy of this strategy using reactive transport simulations. This framework can also serve as an early warning system for detecting unexpected plume migration. We demonstrate our approach using historical and current groundwater data from the Savannah River Site (SRS) F-Area Seepage Basins to estimate uranium and tritium concentrations. The results show that the developed method can provide reliable estimates of contaminant

Optimisation of internal contamination monitoring programme by integration of uncertainties

International Nuclear Information System (INIS)

Davesne, E.; Casanova, P.; Chojnacki, E.; Paquet, F.; Blanchardon, E.

2011-01-01

Potential internal contamination of workers is monitored by periodic bioassay measurements interpreted in terms of intake and committed effective dose by the use of biokinetic and dosimetric models. After a prospective evaluation of exposure at a workplace, a suitable monitoring programme can be defined by choosing adequate measurement techniques and frequency. In this study, the sensitivity of a programme is evaluated by the minimum intake and dose, which may be detected with a given level of confidence by taking into account uncertainties on exposure conditions and measurements. This is made for programme optimisation, which is performed by comparing the sensitivities of different alternative programmes. These methods were applied at the AREVA NC reprocessing plant and support the current monitoring programme as the best compromise between the cost of the measurements and the sensitivity of the programme. (authors)

Prussian blue-coated magnetic nanoparticles for removal of cesium from contaminated environment

International Nuclear Information System (INIS)

Thammawong, Chakrit; Opaprakasit, Pakorn; Tangboriboonrat, Pramuan; Sreearunothai, Paiboon

2013-01-01

A large amount of radioactive cesium (Cs) has been released into natural environment following the nuclear accident in Fukushima, Japan in 2011. Much effort has been directed at capturing Cs and remediation of the contaminated environment. However, conventional sorbents, such as Prussian blue and zeolites cannot be easily recovered once spread into an open environment. Here, we develop new nano-sorbent based on the magnetic nanoparticles (MNP) functionalized with Prussian blue (PB) that possess both high Cs adsorption capacity (96 mg Cs/g sorbent) and large distribution coefficient (3.2 × 10 4 mL/g at 0.5 ppm Cs concentration). The developed sorbents possess good value of saturation magnetization (20 emu/g) allowing for rapid and ease of sorbent separation from the Cs solution after treatment using magnetic field. This Cs magnetic nano-sorbent can offer high potential for the use in large scale remediation of a Cs contaminated environment as well as the possibility of novel Cs decorporation drugs that can be magnetically assisted for accelerated excretion of radiocesium from the human body.

A model for evaluating the radioactive contamination in the urban environment

International Nuclear Information System (INIS)

Hwang, Won Tae; Kim, Eun Han; Jeong, Hyo Joon; Suh, Kyung Suk; Han, Moon Hee

2005-01-01

A model for evaluating radioactive contamination in the urban environment, named METRO-K, was developed as a basic step for accident consequence analysis in case of an accidental release. The three kind of radionuclides ( 137 Cs, 106 Ru, 131 I) and the different chemical forms of iodine (particulate, organic and elemental forms) are considered in the model. The radioactive concentrations are evaluated for the five types of surface (roof, paved road, wall, lawn/soil, tree) as a function of time. Using the model, the contaminative impacts of the surfaces were intensively investigated with respect to with and without precipitation during the measurement periods of radionuclides in air. In addition, a practical application study was conducted using 137 Cs concentration in air and precipitation measured in an European country at the Chernobyl accident. As a result, precipitation was an influential factor in surface contamination. The degree of contamination was strongly dependent on the types of radionuclide and surface. Precipitation was more influential in contamination of 137 Cs than that of 131 I (elemental form)

An assessment of two decades of contaminant monitoring in the Nation’s Coastal Zone.

OpenAIRE

Kimbrough, K. L.; Lauenstein, G. G.; Christensen, J. D.; Apeti, D. A.

2008-01-01

Executive Summary: Information found in this report covers the years 1986 through 2005. Mussel Watch began monitoring a suite of trace metals and organic contaminants such as DDT, PCBs and PAHs. Through time additional chemicals were added, and today approximately 140 analytes are monitored. The Mussel Watch Program is the longest running estuarine and coastal pollutant monitoring effort conducted in the United States that is national in scope each year. Hundreds of scientific journal art...

Radioactivity monitoring of life environment in the Republic of Croatia, Report for 2004 - IMI-CRZ-81

International Nuclear Information System (INIS)

2005-01-01

The radioactivity measurement programme in the environment of Republic of Croatia for 2004 is continuation of measurements that have started in 1959. Sampling, radiochemical analyses and measurements were carried out by the Radiation Protection Unit, Institute for Medical Research and Occupational Health, Zagreb. The scope of the monitoring of contamination in the environmental samples according to the European Commission recommendations of 8 June 2000, was to collect samples of air, fallout, soil, water, alimentary products and fodder. The purpose of these investigations is to collect as many data as possible for the assessment of radiation risk to man. (author)

The Norwegian Radiation Protection Authority leads international cooperation on radioactive contamination in the Arctic

International Nuclear Information System (INIS)

1995-01-01

In cooperation with Russia, Norway is responsible for the part of Arctic Monitoring and Assessment Programme (AMAP) concerning radioactivity. An assessment of the consequences of radioactive contamination for the environment in northern areas will be an important part of AMAP's report to the Ministers of the Environment in the eight participating countries in 1996. The report will contain an overview of the sources of the contamination and the level of radioactivity in the environment, in addition to an evaluation of the consequences for humans and the environment

Using tree swallows to monitor impacts of aquatic contamination in Great Lakes areas of concern

International Nuclear Information System (INIS)

Patnode, K.A.; Bodenstein, B.; Hetzel, R.; Pearson, S.

1995-01-01

Tree swallows were used to evaluate movement and potential impacts of contaminants from sediments in Newton Creek (diesel range organics: DROs) and Sheboygan River (PCBs), tributaries to Lake Superior and Lake Michigan, respectively. Contaminated sites occurred along the course of each river, while reference sites were located upstream or on a nearby river. Productivity was monitored and eggs, day 1 nestlings, and day 12 nestlings were collected from each nest. Whole body or egg homogenates were analyzed for PCBs or DROs. EROD activity in livers from day 12 nestlings is being determined for both PCB and DRO exposures. In the Newton Creek study, hatching success was similar for DRO and reference sites. DROs were detected in gastrointestinal tracts of 1 nestling from the reference and 1 from the contaminated site. DROs were not detected in any egg samples. In the Sheboygan River study, hatching success rates differed between 1 reference and 1 contaminated river segment. PCB daily accumulation rates from day 1 to day 12 nestlings were computed for Sheboygan River. All nestlings at reference nests had negative rates due to growth dilution effects. Preliminary analyses indicate the average rate for nestlings from contaminated segments of the river was 220.3 ng/g/day. These 1995 findings will be combined with 1996 data to evaluate the effectiveness of tree swallows for monitoring ecosystem impacts of aquatic contaminants in Wisconsin

Radiation protection aspects of the trafficking radionuclides contaminated metal scrap

International Nuclear Information System (INIS)

Prouza, Z.

1999-01-01

This paper covers the legal base of the release in the environment of radionuclides containing materials and the radiation protection aspects of trafficking in radionuclides contaminated materials. Materials, substance and objects containing radionuclides or contaminated by them may be released into the environment, if they do not exceed values authorized by SONS (State Office of Nuclear Safety). Legislative measures should be taken against illicit trafficking of the nuclear material in all the areas. The creation of a sophisticated system for the control and regulation of all important radionuclides released into the environment should be based on the radiation protection limits, constraints, reference and exemption levels which are introduced in the legislative documents; the strong supervision of producers and users of the sealed sources by SONS side, in addition to the requirements of the licensing process of their sources; a complete data-base and information exchange system related to illicit trafficking in contaminated material; in this system all the authorities with jurisdiction should be involved. The responsibilities of the persons involved in metal scrap trafficking should include arrangement of appropriate monitoring, rules for transport of the metal scrap, an adequate measuring system to monitor metal scrap including monitoring to prevent processing or smelting of the radioactive material, control measures, etc. All of the above items of legislation are an important challenge for the Czech Republic. (author)

Optimization of the control of contamination at nuclear power plants

International Nuclear Information System (INIS)

Khan, T.A.; Baum, J.W.

1988-05-01

A methodology is described for the optimization of the actions taken to control contamination. It deals with many aspects of contamination, such as the monetary value assigned to a unit of radiation dose, the treatment of skin and extremity dose, and the inefficiencies introduced from working in a contaminated environemnt. The optimization method is illustrated with two case studies based on cleanup projects at nuclear power plants. Guidelines for the use of protective apparel, and for monitoring radiation and contamination at various levels of contamination are presented. The report concludes that additional research is required to quantify the effect of a contaminated environment on work efficiencies

Monitoring for contaminants of emerging concern in drinking water using POCIS passive samplers.

Science.gov (United States)

Metcalfe, Chris; Hoque, M Ehsanul; Sultana, Tamanna; Murray, Craig; Helm, Paul; Kleywegt, Sonya

2014-03-01

Contaminants of emerging concern (CEC) have been detected in drinking water world-wide. The source of most of these compounds is generally attributed to contamination from municipal wastewater. Traditional water sampling methods (grab or composite) often require the concentration of large amounts of water in order to detect trace levels of these contaminants. The Polar Organic Compounds Integrative Sampler (POCIS) is a passive sampling technology that has been developed to concentrate trace levels of CEC to provide time-weighted average concentrations for individual compounds in water. However, few studies to date have evaluated whether POCIS is suitable for monitoring contaminants in drinking water. In this study, the POCIS was evaluated as a monitoring tool for CEC in drinking water over a period of 2 and 4 weeks with comparisons to typical grab samples. Seven "indicator compounds" which included carbamazepine, trimethoprim, sulfamethoxazole, ibuprofen, gemfibrozil, estrone and sucralose, were monitored in five drinking water treatment plants (DWTPs) in Ontario. All indicator compounds were detected in raw water samples from the POCIS in comparison to six from grab samples. Similarly, four compounds were detected in grab samples of treated drinking water, whereas six were detected in the POCIS. Sucralose was the only compound that was detected consistently at all five plants. The POCIS technique provided integrative exposures of CECs in drinking water at lower detection limits, while episodic events were captured via traditional sampling methods. There was evidence that the accumulation of target compounds by POCIS is a dynamic process, with adsorption and desorption on the sorbent occurring in response to ambient levels of the target compounds in water. CECs in treated drinking water were present at low ng L(-1) concentrations, which are not considered to be a threat to human health.

Monitoring and Modeling Farmland Productivity Along the Venice Coastland, Italy

DEFF Research Database (Denmark)

Manoli, G.; Bonetti, S.; Scudiero, E.

2013-01-01

The southern portion of the Venice coastland is a very precarious environment and salt contamination of land and groundwater is a severe problem that is seriously impacting the farmland productivity. Geophysical surveys, lab testing and continuous monitoring of hydrological parameters together wi...... model is linked to the atmosphere by the calculation of the stomatal conductance which is optimized for maximum carbon gain. The model is applied to the field site to understand the impact of land elevation, soil heterogeneities, and seawater contamination on land productivity.......The southern portion of the Venice coastland is a very precarious environment and salt contamination of land and groundwater is a severe problem that is seriously impacting the farmland productivity. Geophysical surveys, lab testing and continuous monitoring of hydrological parameters together...

Fluctuating asymmetry of shape in rodents from radioactively contaminated environments at Chernobyl

International Nuclear Information System (INIS)

Smith, M.H.; Novak, J.M.; Oleksyk, T.K.; Purdue, J.R.; Gashchak, S.

2002-01-01

In this study we addressed the question of whether levels of fluctuating symmetry (FA) were elevated in the radioactively contaminated populations compared to reference populations of an abundant rodent living in both environments: the yellow - necked mouse (Apodemus flavicollis). We used six populations of these animals from both inside the radioactively contaminated area close to the failed Chornobyl reactor in Ukraine and in reference areas with no apparent contamination by radionuclides. Twenty-four landmarks on the ventral surface of the rodent's skulls were used to calculate the amounts of FA of shape using Procrustes methods. A higher level of FA was documented for the populations in closest proximity to the failed Chornobyl Nuclear Plant. This index was significantly higher in populations from the most contaminated locations in the Chornobyl Exclusion Zone than in the reference areas. On the other hand, populations from the less contaminated areas inside the Chornobyl Exclusion Zone did not express FA values different from those in the reference populations

Detection of microbial contaminations in drinking water using ATP measurements – evaluating potential for online monitoring

DEFF Research Database (Denmark)

Vang, Óluva Karin; Corfitzen, Charlotte B.; Albrechtsen, Hans-Jørgen

2011-01-01

There is an increasing call for fast and reliable methods for continuous monitoring of microbial drinking water quality in order to protect public health. The potential for Adenosine triphosphate (ATP) measurements as a real-time analysis for continuous monitoring of microbial drinking water...... quality was investigated through simulation of two contamination scenarios, i.e. drinking water contaminated with waste water and surface water at various concentrations. With ATP measurements it was possible to detect waste water diluted 1000-10,000 times in drinking water depending on sensitivity...... of reagent kit. Surface water diluted 100-1000 times was detected in drinking water with ATP measurements. ATP has the potential as an early warning tool, especially in the period when the contamination concentration is high. 2011 © American Water Works Association AWWA WQTC Conference Proceedings All Rights...

Monitoring and information system about allochthonous substances in foods

International Nuclear Information System (INIS)

Salgovicova, D.; Krizova, S.; Dobrikova, E.

2005-01-01

In 1984 the Food Research Institute in Bratislava was chosen as the organization entrusted to evaluate the results from control of contaminants within field of the Ministry of Agriculture in the Slovak Republic. At the same time in the Constitution was semi-finished the methodology of automatic data processing for monitoring of food chain contamination. In correspondence with the Governmental Decree of Slovak Republic No 620/93 from 7 September 1993 and its item No. 1 - the proposal for implementation of the Environment Monitoring System and of the Integrated search Institute was commissioned by the Minister of Agriculture to act as a Centre of the Partial Monitoring System 'Food and Feed Contaminants'

Modification of GNPS environment radiation monitoring network system

International Nuclear Information System (INIS)

Jiang Lili; Cao Chunsheng

1999-01-01

GNPS Environment Radiation Continuous Monitoring System (KRS), the only real time on-line system of site radiation monitoring, was put into service in 1993 prior to the first loading the the plant. It is revealed through several years of operation that this system has some deficiencies such as inadequate real time monitoring means, no figure and diagram display function on the central computer, high failures, frequent failure warning signals, thus making the availability of the system at a low level. In recent years, with the rapid development of computer network technology and increasingly strict requirements on the NPP environment protection raised by the government and public, KRS modification had become necessary and urgent. In 1996, GNPS carried out modification work on the measuring geometry condition of γ radiation monitoring sub-station and lightening protection. To enhance the functions of real time monitoring and data auto-processing, further modification of the system was made in 1998, including the update of the software and hardware of KRS central processor, set-up of system computer local network and database. In this way, the system availability and monitoring quality are greatly improved and effective monitoring and analysis means are provided for gaseous release during normal operation and under accident condition

Monitoring Potential Transport of Radioactive Contaminants in Shallow Ephemeral Channels: FY2013 and FY2014 (revised)

Energy Technology Data Exchange (ETDEWEB)

Mizell, Steve A. [Desert Research Inst. (DRI), Las Vegas, NV (United States); Miller, Julianne J. [Desert Research Inst. (DRI), Las Vegas, NV (United States); McCurdy, Greg D. [Desert Research Inst. (DRI), Reno, NV (United States); Campbell, Scott A. [Desert Research Inst. (DRI), Las Vegas, NV (United States)

2017-06-01

The Desert Research Institute (DRI) is conducting a field assessment of the potential for contaminated soil to be transported from the Smoky Contamination Area (CA) as a result of storm runoff, which supports National Nuclear Security Administration (NNSA) efforts to complete regulatory closure of the Soils Corrective Action Unit (CAU) contamination areas. The work is intended to confirm the likely mechanism of transport and determine the meteorological conditions that might cause movement of contaminated soils, as well as determine the particle size fraction that is most closely associated with transported radionuclide-contaminated soils. These data will facilitate the appropriate closure design and post-closure monitoring program.

Results of monitoring at Olkiluoto in 2008. Environment

International Nuclear Information System (INIS)

Haapanen, A.

2009-09-01

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2008. These summary reports have been published since 2005 (target year 2004). The environmental monitoring system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for monitoring the state of the environment during the construction (and later operation) of ONKALO underground characterization facility. Although some of the nuclear power production related monitoring studies by TVO (the power company) have been going on from the 1970s, the repository-related environmental monitoring of Olkiluoto Island has only recently been comprehensive. However, the monitoring programme evolves according to experiences from modelling work and increasing knowledge of most important site data. For example, in addition to the originally planned activities, in 2008 several studies on fauna were carried out, some soil and vegetation transects running from land to sea were established, a separate survey of water quality with automatic detectors was carried out and zooplankton and organic carbon studies were started in context of sea monitoring. In the monitoring data, the ongoing construction work (OL3, ONKALO and related infrastructure) is seen for instance in raised levels of noise and some deposited elements. The land-use continues to change, but where there is natural environment is affected by the cooling water from the nuclear power plant. (orig.)

Aquatic mosses as a monitoring tool for 137Cs contamination in streams and rivers--a field study from central southern Norway

International Nuclear Information System (INIS)

Hongve, D.; Brittain, J.E.; Bjoernstad, H.E.

2002-01-01

Mosses are frequently used as biomonitors for trace element pollution in the aquatic environment. The purpose of this study was to assess their usefulness as a tool in monitoring and in regional surveys of radioactive contamination. Specimens of the aquatic mosses, Fontinalis antipyretica and F. dalecarlica, were transplanted from non-contaminated areas to streams and rivers in the Norwegian Jotunheimen Mountains and neighbouring lowland areas that had received radioactive fallout after the Chernobyl accident. Equilibrium concentrations of 137 Cs in the exposed mosses were reached after a few weeks. Two series from 20 streams in 1994 and 1996 show linear correlations between activities in water and moss samples and biomagnification ratios of 10 4 -10 5 . We conclude that mosses are better suited for monitoring purposes than water samples, because they provide values integrated over weeks while the radioactivity in surface waters can be subject to rapid variations according to hydrological events. The activity concentrations in aquatic mosses can be easily measured with good precision even when aqueous concentrations are below the limit of detection. Use of aquatic mosses also reduces the logistic problems of transporting large volumes of water, especially in areas inaccessible by road

An Integrated Environment Monitoring System for Underground Coal Mines—Wireless Sensor Network Subsystem with Multi-Parameter Monitoring

OpenAIRE

Zhang, Yu; Yang, Wei; Han, Dongsheng; Kim, Young-Il

2014-01-01

Environment monitoring is important for the safety of underground coal mine production, and it is also an important application of Wireless Sensor Networks (WSNs). We put forward an integrated environment monitoring system for underground coal mine, which uses the existing Cable Monitoring System (CMS) as the main body and the WSN with multi-parameter monitoring as the supplementary technique. As CMS techniques are mature, this paper mainly focuses on the WSN and the interconnection between t...

Environmental Monitoring Of Microbiological Laboratory: Expose Plate Method

International Nuclear Information System (INIS)

Yahaya Talib; Othman Mahmud; Noraisyah Mohd Yusof; Asmah Mohibat; Muhamad Syazwan Zulkifli

2013-01-01

Monitoring of microorganism is important and conducted regularly on environment of microbiological laboratory at Medical Technology Division. Its objective is to ensure the quality of working environment is maintained according to microbial contamination, consequently to assure the quality of microbiological tests. This paper presents report of environmental monitoring since year 2007. The test involved was bacterial colony counts after the growth media was exposed to air at identified location. (author)

Radiological monitoring of food in Cuba

International Nuclear Information System (INIS)

Jerez V, S.F.

1996-01-01

The appearing of the problem for protecting the environment from radioactive contamination is not an accidental matter. The introduction into the earth crust of radioactive material coming from nuclear weapons, accidents, wastes, etc, has caused, as a consequence, the contamination of the biosphere. The extensive trade of food in our country has made necessary the establishment of radiological monitoring in food, which was organized by the Department of Public Health. The structure, functions, characteristics and aspects related to radiological monitoring of food in Cuba are shown in the present paper. The organization and resources for performing the monitoring program, both for normal conditions and for nuclear and/or radiological emergency cases, are detailed. (author). 12 refs., 2 figs

The near coastal environment monitored from space

International Nuclear Information System (INIS)

Szekielda, K.H.

1977-01-01

The optical information required for monitoring the marine environment from space is discussed and applied for the near coastal area. By categorizing coastal features it is possible to recognize coastal regions to a high degree and to indentify water masses derived from land sources and sewage dumping sites. It is concluded that monitoring from space can be used as a tool in environmental planning. (orig.) [de

Zero-tension lysimeters: An improved design to monitor colloid-facilitated contaminant transport in the vadose zone

International Nuclear Information System (INIS)

Thompson, M.L.; Scharf, R.L.; Shang, C.

1995-01-01

There is increasing evidence that mobile colloids facilitate the long-distance transport of contaminants. The mobility of fine particles and macromolecules has been linked to the movement of actinides, organic contaminants, and heavy metals through soil. Direct evidence for colloid mobility includes the presence of humic materials in deep aquifers as well as coatings of accumulated clay, organic matter, or sesquioxides on particle or aggregate surfaces in subsoil horizons of many soils. The potential for colloid-facilitated transport of contaminants from hazardous-waste sites requires adequate monitoring before, during, and after in-situ remediation treatments. Zero-tension lysimeters (ZTLs) are especially appropriate for sampling water as it moves through saturated soil, although some unsaturated flow events may be sampled as well. Because no ceramic barrier or fiberglass wick is involved to maintain tension on the water (as is the case with other lysimeters), particles suspended in the water as well as dissolved species may be sampled with ZTLs. In this report, a ZTL design is proposed that is more suitable for monitoring colloid-facilitated contaminant migration. The improved design consists of a cylinder made of polycarbonate or polytetrafluoroethylene (PTFE) that is placed below undisturbed soil material. In many soils, a hydraulically powered tube may be used to extract an undisturbed core of soil before placement of the lysimeter. In those cases, the design has significant advantages over conventional designs with respect to simplicity and speed of installation. Therefore, it will allow colloid-facilitated transport of contaminants to be monitored at more locations at a given site

Geophysical Monitoring of Hydrocarbon-Contaminated Soils Remediated with a Bioelectrochemical System.

Science.gov (United States)

Mao, Deqiang; Lu, Lu; Revil, André; Zuo, Yi; Hinton, John; Ren, Zhiyong Jason

2016-08-02

Efficient noninvasive techniques are desired for monitoring the remediation process of contaminated soils. We applied the direct current resistivity technique to image conductivity changes in sandbox experiments where two sandy and clayey soils were initially contaminated with diesel hydrocarbon. The experiments were conducted over a 230 day period. The removal of hydrocarbon was enhanced by a bioelectrochemical system (BES) and the electrical potentials of the BES reactors were also monitored during the course of the experiment. We found that the variation in electrical conductivity shown in the tomograms correlate well with diesel removal from the sandy soil, but this is not the case with the clayey soil. The clayey soil is characterized by a larger specific surface area and therefore a larger surface conductivity. In sandy soil, the removal of the diesel and products from degradation leads to an increase in electrical conductivity during the first 69 days. This is expected since diesel is electrically insulating. For both soils, the activity of BES reactors is moderately imaged by the inverted conductivity tomogram of the reactor. An increase in current production by electrochemically active bacteria activity corresponds to an increase in conductivity of the reactor.

Gulf of Mexico offshore operations monitoring experiment (GOOMEX), phase I : sublethal responses to contaminant exposure - introduction and overview

International Nuclear Information System (INIS)

Kennicutt, M.C.; Green, R.H.; Montagna, P.

1996-01-01

The Gulf of Mexico Offshore Operations Monitoring Experiment (GOOMEX) is a three-phase study to test and evaluate a range of biological, biochemical, and chemical methodologies to detect and assess chronic sublethal biological impacts in the vicinity of long-duration activities associated with oil and gas exploration and production. A chronic impact is defined as an effect on the biota caused by exposure to the long-term accumulation of chemicals in the environment. The basic program, comprising four field activities over a 2-yr period, was designed to detect nearfield impacts and contaminant gradients extending out from each site. Five test sites were evaluated and three selected as most appropriate for long-term study: MU-A85, MAI-686, and HI-A389. The sampling design included a radial pattern with stations at 30-50, 100, 200, 500, and 3000 m distance and employed a dose-response model to test the hypotheses that biological, chemical, and biochemical variations are due to platform-derived contaminants. Study components included contaminant (trace metals and hydrocarbons) analysis in sediments, pore waters, and biological tissues; assemblage analysis of benthic meiofauna, infauna, and epifauna, assessment of community health based on life history and reproduction studies; and the induction of detoxification responses. (author). 57 refs., 9 tabs., 5 figs

USING SPMDS TO ACCESS MANAGMENT STRATEGIES FOR PCB CONTAMINATED SEDIMENTS

Science.gov (United States)

Dredging, in-place treatment, capping and monitored natural recovery, used together or separately are the primary approaches for managing contaminated sediment risks. Understanding how well different approaches work in different environments is critical for choosing an appropria...

Osprey: worldwide sentinel species for assessing and monitoring environmental contamination in rivers, lakes, reservoirs, and estuaries.

Science.gov (United States)

Grove, Robert A; Henny, Charles J; Kaiser, James L

2009-01-01

In the United States, many fish and wildlife species have been used nationwide to monitor environmental contaminant exposure and effects, including carcasses of the bald eagle (Haliaeetus leucocephalus), the only top avian predator regularly used in the past. Unfortunately, bald eagles are sensitive to investigator intrusion at the nest. Thus, the osprey (Pandion haliaetus) is evaluated as a potential sentinel species for aquatic ecosystems. Several characteristics support the choice of the osprey as a sentinel species, including: (1) fish-eating diet atop the aquatic food web, (2) long-lived with strong nest fidelity, (3) adapts to human landscapes (potentially the most contaminated), (4) tolerates short-term nest disturbance, (5) nests spatially distributed at regular intervals, (6) highly visible nests easily located for study, (7) ability to accumulate most, if not all, lipophilic contaminants, (8) known sensitivity to many contaminants, and (9) nearly a worldwide distribution. These osprey traits have been instrumental in successfully using the species to understand population distribution, abundance, and changes over time; the effects of various contaminants on reproductive success; how contaminants in prey (fish on biomass basis) contribute to egg concentrations (i.e., biomagnification factors); and spatial residue patterns. Data summarized include nesting population surveys, detailed nesting studies, and chemical analyses of osprey egg, organ, blood, and feather samples for contaminants that bioaccumulate and/or biomagnify in aquatic food webs; and biochemical evaluations of blood and various organs. Studies in the United States, Canada, Mexico, Europe, and elsewhere have shown the osprey to be a useful sentinel species for monitoring selected environmental contaminants, including some emerging contaminants in lakes, reservoirs, rivers, and estuaries.

Applications of micro-spectroscopy and chemical imaging to delineate contaminant associations in heterogeneous mineral environments

International Nuclear Information System (INIS)

Hunter, D.

1998-01-01

Full text: Chemical speciation of a contaminant in the environment controls its mobility, bioavailability and ultimately its toxicity to organisms, including man. Transport models for environmental contaminants have continually failed because of an incomplete understanding of the physicochemical controls regulating the chemical speciation of both inorganic and organic contaminants. One of the greatest analytical difficulties to studying contaminant behavior in the subsurface is the inherent heterogeneity of mineral and organic constituents. Added to the multiplicity, of geological component surfaces that contaminants can interact with is the synergistic (both positive and negative) effects that occur due to non-conservative interactions between these components. Modern spectroscopic techniques can provide detailed quantitative and qualitative information on how contaminants behave within a specific mineral's surface-water interface. In general, the information is so rich as to be un interpretable in heterogeneous systems where multiple binding environments exist on competing multi-mineralic surfaces. None-the-less, it is the behaviour of contaminants in complex heterogeneous environments that is tantamount to understanding and predicting transport behaviour under field conditions. One solution is micro-spot spectroscopy. In micro-spot spectroscopy, chemical composition is determined by dispersing light absorbed or emitted from a highly localized spatial position within a heterogeneous sample. Such examples include FT-IR, Raman, fluorescence, and X-Ray absorption spectroscopies where spatial resolutions of 1 to 10 μm can be achieved. This scale can be still far too large to fully spectroscopically probe binding behaviour that is heterogeneous on colloidal scales ranging down to nanometers. However, it can provide a bridge to established characterization techniques such as optical petrography, since the challenge lies not only in identifying the speciation and

Results of monitoring at Olkiluoto in 2009. Environment

Energy Technology Data Exchange (ETDEWEB)

Haapanen, A. (ed.) (Haapanen Forest Consulting, Vanhakylae (Finland))

2010-10-15

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2009. These summary reports have been published since 2005. The environmental monitoring system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for monitoring the state of the environment during the construction (and later operation) of ONKALO underground characterization facility. Part of the monitoring is performed by the company running the nuclear power plants on the island, Teollisuuden Voima Oy (TVO). Monitoring has been carried out for varying periods of time depending on the sector: some monitoring activities performed by TVO originate from the 1970s and the repository-related environmental monitoring of Olkiluoto from the early 2000s. The monitoring programme evolves according to the experiences gained from the modelling work and an increased understanding of the site. Augmentations in 2009 include e.g. establishment of a new forest intensive monitoring plot (FIP14), continuation of studies on fine roots and on the species composition and abundances of small mammals. Line transect samplings of ants, terrestrial snails and earthworms were carried out and a systematic monitoring of island birds was started. In addition, a project was started where the sediment load and factors affecting the sediment transportation into Eurajoensalmi bay is examined. Dust produced during construction of the third nuclear power unit (OL3), ONKALO and related infrastructure can be seen in the soil solution and deposition results. Furthermore, the construction works and road traffic have a raising effect on the noise levels of the immediate surroundings. The land-use continues to change, but the remaining natural environment resembles other coastal locations. The young age of the soils and the closeness of the sea are reflected in the soil properties. Mammalian fauna on the island is typical of coastal

Results of monitoring at Olkiluoto in 2009. Environment

International Nuclear Information System (INIS)

Haapanen, A.

2010-10-01

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2009. These summary reports have been published since 2005. The environmental monitoring system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for monitoring the state of the environment during the construction (and later operation) of ONKALO underground characterization facility. Part of the monitoring is performed by the company running the nuclear power plants on the island, Teollisuuden Voima Oy (TVO). Monitoring has been carried out for varying periods of time depending on the sector: some monitoring activities performed by TVO originate from the 1970s and the repository-related environmental monitoring of Olkiluoto from the early 2000s. The monitoring programme evolves according to the experiences gained from the modelling work and an increased understanding of the site. Augmentations in 2009 include e.g. establishment of a new forest intensive monitoring plot (FIP14), continuation of studies on fine roots and on the species composition and abundances of small mammals. Line transect samplings of ants, terrestrial snails and earthworms were carried out and a systematic monitoring of island birds was started. In addition, a project was started where the sediment load and factors affecting the sediment transportation into Eurajoensalmi bay is examined. Dust produced during construction of the third nuclear power unit (OL3), ONKALO and related infrastructure can be seen in the soil solution and deposition results. Furthermore, the construction works and road traffic have a raising effect on the noise levels of the immediate surroundings. The land-use continues to change, but the remaining natural environment resembles other coastal locations. The young age of the soils and the closeness of the sea are reflected in the soil properties. Mammalian fauna on the island is typical of coastal

Monitoring of raptors and their contamination levels in Norway.

Science.gov (United States)

Gjershaug, Jan Ove; Kålås, John Atle; Nygård, Torgeir; Herzke, Dorte; Folkestad, Alv Ottar

2008-09-01

This article summarizes results from raptor monitoring and contamination studies in Norway of the golden eagle, gyrfalcon, white-tailed sea eagle, osprey, peregrine, and merlin. Golden eagle and gyrfalcon populations have been monitored since 1990 as part of the "Monitoring Programme for Terrestrial Ecosystems" (TOV). No long-term trend in the population size or productivity of golden eagle has been shown in any of the 5 study areas. The reproductive output of gyrfalcon is monitored in 3 areas. It is positively correlated with the populations of its main prey species, the rock ptarmigan and the willow ptarmigan. The white-tailed sea eagle population has been monitored since 1974 by the Norwegian Ornithological Society, and the population is increasing. The levels of pesticides and polychlorinated biphenyls are low in the eggs of both the golden eagle and the gyrfalcon, but elevated levels and effects on reproduction have been indicated for a coastal subpopulation of golden eagle. The pollutant levels in white-tailed sea eagle are lower than in the Baltic population of sea eagles, and shell thinning was never severe overall, but individual eggs have contained pollutant concentrations above critical levels. The levels of pollutants in the bird-eating falcons, peregrine, and merlin were higher than in other species. New emerging pollutants, like brominated diphenylethers and perfluorinated organic compounds, could be detected in all species. By incorporating available published and unpublished data, we were able to produce time trends for pollutants and shell thickness over 4 decades.

Monitoring radioactivity in the environment: context, objectives, challenges and prospects

International Nuclear Information System (INIS)

Collet, J.; Jaunet, P.

2010-01-01

The aims of environmental radioactivity monitoring are multiples: protection of human health and environment, knowledge of the radiological status of the environment, early detection of radiological events, public information. This monitoring is ensured by several stakeholders (licensees, IRSN, ASN, state and local authorities, associations...) and in all environment compartments (air, water, soil, fauna and flora...). Within a European regulatory context, the Nuclear Transparency and Security Act 2006-686 of 13 June 2006 (TSN Act) reinforces the importance attached to consideration of safety, radiation protection and the environment. Other developments in the scope of environmental radioactivity must be noted: new stakeholders, lower background radiation, deployment of the French National Network of Environmental Radioactivity Monitoring (RNM), evolution of the ICPR thoughts to take better account of environmental protection, post-accident management doctrine, new concerns about environmental behaviour of some radionuclides. In order to maintain a quality policy in the field of environmental radioactivity measurements and to ensure the transparency of information, ASN will make sure that the strategy of environmental radioactivity monitoring will take into account these concerns. (author)

The sensitivity of different environments to radioactive contamination

International Nuclear Information System (INIS)

Tracy, B.L.; Carini, F.; Barabash, S.; Berkovskyy, V.; Brittain, J.E.; Chouhan, S.; Eleftheriou, G.; Iosjpe, M.; Monte, L.; Psaltaki, M.; Shen, J.; Tschiersch, J.; Turcanu, C.

2013-01-01

This paper describes modelling calculations carried out to determine the sensitivity of various rural and semi-natural environments to radionuclide contamination by 137 Cs, 90 Sr, and 131 I released during a major nuclear accident. Depositions of 1000 Bq/m 3 were assumed for each radionuclide. Four broad types of environments were considered: agricultural, forest or tundra, freshwater aquatic, and coastal marine. A number of different models were applied to each environment. The annual dose to a human population receiving most or all of its food and drinking water from a given environment was taken as a broad measure of sensitivity. The results demonstrated that environmental sensitivity was highly radionuclide specific, with 137 Cs generally giving the highest doses during the first year, especially for adults, in terrestrial and freshwater pathways. However, in coastal marine environments, 131 I and 239 Pu were more significant. Sensitivity was time dependent with doses for the first year dominating those for the 2nd and 10th years after deposition. In agricultural environments the ingestion dose from 137 Cs was higher for adults than other age groups, whereas for 90 Sr and 131 I, the ingestion dose was highest for infants. The dependence of sensitivity on social and economic factors such as individual living habits, food consumption preferences, and agricultural practices is discussed. -- Highlights: ► We model the impact of fallout from a nuclear accident in four different settings. ► The greatest impact on human populations occurs in agricultural environments. ► 137 Cs dominates in agricultural, forest, and tundra environments. ► Both 137 Cs and 90 Sr are important in freshwater aquatic environments. ► Coastal marine environments are more susceptible to 131 I and 239 Pu

Establishment of a System for Monitoring and Control of Cross Contamination in the Laboratory of Microbiological Analysis of Food during 2009

Directory of Open Access Journals (Sweden)

Corpa- Iguarán Eduardo Javid

2012-03-01

Full Text Available Within the activities for quality control in the laboratory, the final results of a particular analyteare now recognized as intermediates, due to the relevance given to quality assurance, as the ultimategoal of programs for quality management. This concept makes it necessary to establishmentof integral tools, to detect events such as cross-contamination, and measures to avoid affectingthe analysis method. Objective: to established a system for monitoring and control of crosscontaminationin the laboratory of microbiological analysis of food. Materials and methods:Flowcharts were developed to control the proceedings on the populations of aerobe mesophilicsand molds originated from pollution in the environment, surfaces, sterile material and culturemedia, which included a decision tree designed to perform control actions based on tolerance intervals,which were established as objective tool to decision-making leading to normalize countsof microbial populations in question. Results: Warning limits stricter were obtained for aerobicmesophilic and mold populations in the different controls, except for environment of media preparationand the corresponding for sterile material. Conclusion: The process developed allowedto complement the system of internal quality control in the laboratory, to provide of an objectivetool for closing nonconformities because of cross-contamination.

study on trace contaminants control assembly for sealed environment chamber

Science.gov (United States)

Pang, L. P.; Wang, J.; Liu, L. K.; Liu, H.

The biological and Physicochemical P C life support technologies are all important parts to establish a human Closed Ecological Life Support System CELSS for long-duration mission The latter has the advantages of lower power consumption lower mass and higher efficiency therefore researchers often incorporate the use of biological systems with P C life support technologies to continuously recycle air water and part of the solid waste stream generated such as the Russian BLSS and the NASA-sponsored Lunar-Mars Life Support Test Project LMLSTP In short these tests were very successful in integrating biological and P C life support technologies for long-duration life support Therefore we should use a combination of integrated biological with P C life support technologies in a human CELSS Human construction materials plants animals and soils release much trace toxic gases in a CELSS and they will inhibit plant growth and badly affect human health when their concentrations rise over their threshold levels The effect of biological trace contaminant control technologies is slower especially for a human sealed chamber because human produce much more methane and other contaminants A regenerative Trace Contaminant Control Subsystem TCCS with P C technology is a more important part in this case to control quickly the airborne contaminants levels and assure human in good condition in a sealed chamber This paper describes a trace contaminant control test facility incorporated a 8 m3 sealed environment chamber a regenerative TCCS with P C

40 CFR 141.61 - Maximum contaminant levels for organic contaminants.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Maximum contaminant levels for organic contaminants. 141.61 Section 141.61 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER... Regulations: Maximum Contaminant Levels and Maximum Residual Disinfectant Levels § 141.61 Maximum contaminant...

Phytoremediation and phytomining: Using plants to remediate contaminated or mineralized environments

Science.gov (United States)

One type of harsh environment for plants is metal and metalloid contaminated or mineralized soils which exist in most countries due to geological formations or to the history of mining and smelting. Depending on soil pH and fertility, metal-rich soils may be barren and eroding into wider areas. Some...

Environmental contaminants in food. Volume II-part a: working papers. I. Priority setting of toxic substances for guiding monitoring programs. II. Five case studies of environmental food contamination

International Nuclear Information System (INIS)

1980-01-01

This volume contains working papers written for Office of Technology Assessment (OTA) to assist in preparation of the report Environmental Contaminants in Food. The contents include: (1) Priority setting of toxic substances for guiding monitoring programs; and (2) Five case studies of environmental food contamination

Radioactivity monitoring and import regulation of the contaminated foodstuffs in Japan following the Chernobyl nuclear power plant accident

International Nuclear Information System (INIS)

Izumo, Yoshiro

1997-01-01

Radioactivity monitoring and import regulation of the contaminated foodstuffs executed by Minstry of Health and Welfare following the Chernobyl nuclear plant accident were reviewed as follows; 1) background of socio-psychological effects and environmental radioactivity leading to the regulation (to may 3, 1986); 2) intial intervention for imported foodstuffs in Japan (may 8, '86), and 3) in european countries (to may 31, '86), immediately after the Accident, respectively; 4) determination of the interim driven intervention level for radionuclides in imported foodstuffs (( 134 Cs + 137 Cs): 370 Bq/Kg) and activation of the monitoring, 5) outline of the monitoring with elapsed time, number of foodstuffs monitored, number of foodstuffs exceeded radioactivity of the intervention level and re-exported; 6) guideline in international trade of radioactive contaminated foodstuffs adopted by CODEX Alimentarius Commission (FAO/WHO) and the intervention level recommended by ICRP following the Accident; 7) discussion for problems and scopes in future based on the results of monitoring. As the results, a number of imported foodstuffs (about 75,000 samples at present) has been monitored, 55 samples exceeding the interim intervention level were re-exported to each export's country, and socio-psychological doubts for radioactive contamination of imported foodstuffs have been dispersed. In addition, problems for several factors based on calculation of the interim intervention level, radioactivity level of foodstuffs exceeding about 50 Bq/Kg as radiocesiums and necessity of monitoring for the other radionuclides in foods except radiocesiums were also discussed. (author)

Radioactivity monitoring and import regulation of the contaminated foodstuffs in Japan following the Chernobyl nuclear power plant accident

Energy Technology Data Exchange (ETDEWEB)

Izumo, Yoshiro [Institute of Public Health, Tokyo (Japan)

1997-03-01

Radioactivity monitoring and import regulation of the contaminated foodstuffs executed by Minstry of Health and Welfare following the Chernobyl nuclear plant accident were reviewed as follows; (1) background of socio-psychological effects and environmental radioactivity leading to the regulation (to may 3, 1986); (2) intial intervention for imported foodstuffs in Japan (may 8, `86), and (3) in european countries (to may 31, `86), immediately after the Accident, respectively; (4) determination of the interim driven intervention level for radionuclides in imported foodstuffs (({sup 134}Cs + {sup 137}Cs): 370 Bq/Kg) and activation of the monitoring, (5) outline of the monitoring with elapsed time, number of foodstuffs monitored, number of foodstuffs exceeded radioactivity of the intervention level and re-exported; (6) guideline in international trade of radioactive contaminated foodstuffs adopted by CODEX Alimentarius Commission (FAO/WHO) and the intervention level recommended by ICRP following the Accident; (7) discussion for problems and scopes in future based on the results of monitoring. As the results, a number of imported foodstuffs (about 75,000 samples at present) has been monitored, 55 samples exceeding the interim intervention level were re-exported to each export`s country, and socio-psychological doubts for radioactive contamination of imported foodstuffs have been dispersed. In addition, problems for several factors based on calculation of the interim intervention level, radioactivity level of foodstuffs exceeding about 50 Bq/Kg as radiocesiums and necessity of monitoring for the other radionuclides in foods except radiocesiums were also discussed. (author)

Occurrence of antibiotics as emerging contaminant substances in aquatic environment.

Science.gov (United States)

Milić, Nataša; Milanović, Maja; Letić, Nevena Grujić; Sekulić, Maja Turk; Radonić, Jelena; Mihajlović, Ivana; Miloradov, Mirjana Vojinović

2013-01-01

The occurrence of pharmaceutical residues in the environment has become a subject of growing concern. Due to the constant input of the emerging contaminants in the surface water via wastewater which leads to the long-term adverse effects on the aquatic and terrestrial organisms, special attention is being paid to their presence in the aquatic environment. Most of the emerging substances, especially pharmaceuticals, could not be completely removed using the wastewater treatment. Pharmaceuticals are usually water soluble and poorly degradable. They can pass through all natural filtrations and then reach the groundwater and, finally, the drinking water. The trace levels of antibiotics could have a negative impact on the environment and public health because of their inherent bioactivity. This article is an overview of the presence of the antibiotic residual concentrations, methods and levels of detection and possible risks to both health and environment.

Analyses of integrated aircraft cabin contaminant monitoring network based on Kalman consensus filter.

Science.gov (United States)

Wang, Rui; Li, Yanxiao; Sun, Hui; Chen, Zengqiang

2017-11-01

The modern civil aircrafts use air ventilation pressurized cabins subject to the limited space. In order to monitor multiple contaminants and overcome the hypersensitivity of the single sensor, the paper constructs an output correction integrated sensor configuration using sensors with different measurement theories after comparing to other two different configurations. This proposed configuration works as a node in the contaminant distributed wireless sensor monitoring network. The corresponding measurement error models of integrated sensors are also proposed by using the Kalman consensus filter to estimate states and conduct data fusion in order to regulate the single sensor measurement results. The paper develops the sufficient proof of the Kalman consensus filter stability when considering the system and the observation noises and compares the mean estimation and the mean consensus errors between Kalman consensus filter and local Kalman filter. The numerical example analyses show the effectiveness of the algorithm. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

The role of national system of radiological survey in short, intermediate and long term monitoring the environment radioactivity and health status in uranium industry areas

International Nuclear Information System (INIS)

Dumitrescu, Alina; Milu, C.

2000-01-01

The environment radioactivity survey in Romania is performed by CNCAN (National Commission for Nuclear Activities Control) national network. The health status survey of population is carried out by national network of Health Ministry which comprises 23 laboratories. The tasks of the these networks are the following: assessment of natural and artificial irradiation of occupationally exposed personnel and population, as well as goods used by them; determination of population irradiation, survey of environment, food and human internal contamination; survey of health status of the population exposed to radiation, monitoring the medical checkups of the occupationally exposed personnel as well as their dosimetric monitoring; specific enactment, authorization and supervision of nuclear facilities, sanitary expertise and medical examinations; educational activities related to hygiene, radiotoxicology, radioecology and radiobiology. (authors)

Employee quality, monitoring environment and internal control

OpenAIRE

Chunli Liu; Bin Lin; Wei Shu

2017-01-01

We investigate the effect of internal control employees (ICEs) on internal control quality. Using special survey data from Chinese listed firms, we find that ICE quality has a significant positive influence on internal control quality. We examine the effect of monitoring on this result and find that the effect is more pronounced for firms with strict monitoring environments, especially when the firms implement the Chinese internal control regulation system (CSOX), have higher institutional ow...

Second report on the Oak Ridge National Laboratory Biological Monitoring and Abatement Program for White Oak Creek Watershed and the Clinch River

International Nuclear Information System (INIS)

Loar, J.M.; Appellanis, S.M.; Jimenez, B.D.; Huq, M.V.; Meyers-Schone, L.J.; Mohrbacher, D.A.; Olsen, C.R.

1992-12-01

As a condition of the National Pollutant Discharge Elimination System (NPDES) permit issued to Oak Ridge National Laboratory (ORNL) on April 1, 1986, a Biological Monitoring and Abatement Program (BMAP) was developed for White Oak Creek (WOC); selected tributaries of WOC, including Fifth Creek, First Creek, Melton Branch, and Northwest Tributary; and the Clinch River. BMAP consists of seven major tasks that address both radiological and nonradiological contaminants in the aquatic and terrestrial environs on-site and the aquatic environs off-site. These tasks are (1) toxicity monitoring; (2) bioaccumulation monitoring of nonradiological contaminants in aquatic biota; (3) biological indicator studies; (4) instream ecological monitoring; (5) assessment of contaminants in the terrestrial environment; (6) radioecology of WOC and White Oak Lake (WOL); and (7) contaminant transport, distribution, and fate in the WOC embayment-Clinch River-Watts Bar Reservoir system. This document, the second of a series of annual reports, described the results of BMAP studies conducted in 1987

Second report on the Oak Ridge National Laboratory Biological Monitoring and Abatement Program for White Oak Creek Watershed and the Clinch River

Energy Technology Data Exchange (ETDEWEB)

Loar, J.M. [ed.; Adams, S.M.; Bailey, R.D.; Blaylock, B.G.; Boston, H.L.; Cox, D.K.; Huston, M.A.; Kimmel, B.L.; Loar, J.M.; Olsen, C.R.; Ryon, M.G.; Shugart, L.R.; Smith, J.G.; Southworth, G.R.; Stewart, A.J.; Walton, B.T.; Talmage, S.S.; Murphy, J.B.; Valentine, C.K. [Oak Ridge National Lab., TN (United States); Appellanis, S.M.; Jimenez, B.D. [Puerto Rico Univ., San Juan (Puerto Rico); Huq, M.V. [Connecticut Dept. of Environmental Protection, Hamden, CT (United States); Meyers-Schone, L.J. [Frankfurter, Gross-Gerau (Germany); Mohrbacher, D.A. [Automated Sciences Group, Inc., Oak Ridge, TN (United States); Olsen, C.R. [USDOE Office of Energy Research, Washington, DC (United States). Environmental Sciences Div.; Stout, J.G. [Cincinnati Univ., OH (United States)

1992-12-01

As a condition of the National Pollutant Discharge Elimination System (NPDES) permit issued to Oak Ridge National Laboratory (ORNL) on April 1, 1986, a Biological Monitoring and Abatement Program (BMAP) was developed for White Oak Creek (WOC); selected tributaries of WOC, including Fifth Creek, First Creek, Melton Branch, and Northwest Tributary; and the Clinch River. BMAP consists of seven major tasks that address both radiological and nonradiological contaminants in the aquatic and terrestrial environs on-site and the aquatic environs off-site. These tasks are (1) toxicity monitoring; (2) bioaccumulation monitoring of nonradiological contaminants in aquatic biota; (3) biological indicator studies; (4) instream ecological monitoring; (5) assessment of contaminants in the terrestrial environment; (6) radioecology of WOC and White Oak Lake (WOL); and (7) contaminant transport, distribution, and fate in the WOC embayment-Clinch River-Watts Bar Reservoir system. This document, the second of a series of annual reports, described the results of BMAP studies conducted in 1987.

Norwegian monitoring (1990-2015) of the marine environment around the sunken nuclear submarine Komsomolets.

Science.gov (United States)

Gwynn, Justin P; Heldal, Hilde Elise; Flo, Janita K; Sværen, Ingrid; Gäfvert, Torbjörn; Haanes, Hallvard; Føyn, Lars; Rudjord, Anne Liv

2018-02-01

Norway has monitored the marine environment around the sunken Russian nuclear submarine Komsomolets since 1990. This study presents an overview of 25 years of Norwegian monitoring data (1990-2015). Komsomolets sank in 1989 at a depth of 1680 m in the Norwegian Sea while carrying two nuclear torpedoes in its armament. Subsequent Soviet and Russian expeditions to Komsomolets have shown that releases from the reactor have occurred and that the submarine has suffered considerable damage to its hulls. Norwegian monitoring detected 134 Cs in surface sediments around Komsomolets in 1993 and 1994 and elevated activity concentrations of 137 Cs in bottom seawater between 1991 and 1993. Since then and up to 2015, no increased activity concentrations of radionuclides above values typical for the Norwegian Sea have been observed in any environmental sample collected by Norwegian monitoring. In 2013 and 2015, Norwegian monitoring was carried out using an acoustic transponder on the sampling gear that allowed samples to be collected at precise locations, ∼20 m from the hull of Komsomolets. The observed 238 Pu/ 239,240 Pu activity ratios and 240 Pu/ 239 Pu atom ratios in surface sediments sampled close to Komsomolets in 2013 did not indicate any releases of Pu isotopes from reactor or the torpedo warheads. Rather, these values probably reflect the overprinting of global fallout ratios with fluxes of these Pu isotopes from long-range transport of authorised discharges from nuclear reprocessing facilities in Northern Europe. However, due to the depth at which Komsomolets lies, the collection of seawater and sediment samples in the immediate area around the submarine using traditional sampling techniques from surface vessels is not possible, even with the use of acoustic transponders. Further monitoring is required in order to have a clear understanding of the current status of Komsomolets as a potential source of radioactive contamination to the Norwegian marine environment

Monitoring of radioactivity in the environment 201

International Nuclear Information System (INIS)

Moeller, B.; Dyve, J.E.; Tazmini, K.

2013-01-01

The Report summarizes the data from Norwegian Radiation Protection Authority and The Norwegian Civil Defence monitoring programs for radioactivity in the environment in 2011. A short description of the systems is also presented.(Author)

Optimal layout of radiological environment monitoring based on TOPSIS method

International Nuclear Information System (INIS)

Li Sufen; Zhou Chunlin

2006-01-01

TOPSIS is a method for multi-objective-decision-making, which can be applied to comprehensive assessment of environmental quality. This paper adopts it to get the optimal layout of radiological environment monitoring, it is proved that this method is a correct, simple and convenient, practical one, and beneficial to supervision departments to scientifically and reasonably layout Radiological Environment monitoring sites. (authors)

Sensitivity of radiation monitoring systems in Manila Ports in detecting contamination in foodstuff shipments

International Nuclear Information System (INIS)

Romallosa, Kristine Marie D.; Caseria, Estrella S.; Piquero, Ronald E.; Agustin, Jan Aldrich A.

2011-01-01

During the Fukushima Nuclear Power Plant accident in Japan, one of the Philippines' measures to protect the public from radiological hazards of the accident is by monitoring agricultural and food imports for radioactive contamination. In this study, the sensitivity of the mobile Radiation Monitoring System (RM) in Manila Ports in detecting contamination in incoming foodstuff shipments was determined. Large volume synthetic 137 Cs reference sources were used to determine the minimum detectable concentration (MDC) of the RMS. The reference sources have radioactivity concentrations that are comparable to the PNRI guidance level of 1000 Bg/kg for 137 Cs that is destined for general consumption. Results of the MDC measurements show that the RMS units are sensitive enough to detect radioactivity levels that are within the guidance levels provided that a) the minimum package lot is approximately 200 kg, b) the package is positioned at the detector side, and c) the alarm setting of RMS is as calibrated. It was therefore established that the RMS can be used to initially screen incoming foodstuff shipments of possible contamination and thereby help minimize potential radiation exposures to the public. (author)

Long Term Remote Monitoring of TCE Contaminated Groundwater at Savannah River Site

International Nuclear Information System (INIS)

Duran, C.; Gudavalli, R.; Lagos, L.; Tansel, B.; Varona, J.; Allen, M.

2004-01-01

The purpose of this study was to develop a mobile self powered remote monitoring system enhanced for field deployment at Savannah River Site (SRS). The system used a localized power source with solar recharging and has wireless data collection, analysis, transmission, and data management capabilities. The prototype was equipped with a Hydrolab's DataSonde 4a multi-sensor array package managed by a Supervisory Control and Data Acquisition (SCADA) system, with an adequate pumping capacity of water samples for sampling and analysis of Trichloroethylene (TCE) in contaminated groundwater wells at SRS. This paper focuses on a study and technology development efforts conducted at the Hemispheric Center for Environmental Technology (HCET) at Florida International University (FIU) to automate the sampling of contaminated wells with a multi-sensor array package developed using COTS (Commercial Off The shelf) parts. Bladder pumps will pump water from different wells to the sensors array, water quality TCE indicator parameters are measured (i.e. pH, redox, ORP, DO, NO3 -, Cl-). In order to increase user access and data management, the system was designed to be accessible over the Internet. Remote users can take sample readings and collect data remotely over a web. Results obtained at Florida International University in-house testing and at a field deployment at the Savannah River Site indicate that this long term monitoring technique can be a feasible solution for the sampling of TCE indicator parameters at remote contaminated sites

Effect-directed analysis supporting monitoring of aquatic environments — An in-depth overview

NARCIS (Netherlands)

Brack, W.; Ait-Aissa, S.; Burgess, R.M.; Creusot, N.; Di Paolo, C.; Escher, B.I.; Hewitt, L.M.; Hilscherova, K.; Hollender, J.; Hollert, H.; Jonker, W.; Kool, J.; Lamoree, M.H.; Muschket, M.; Neumann, S.; Rostkowski, P.; Ruttkies, C.; Schollee, J.; Schymanski, E.L.; Schulze, T.; Seiler, T.; Tindall, A.J.; De Aragão Umbuzeiro, G.; Vrana, B.; Krauss, M.

2016-01-01

Aquatic environments are often contaminated with complex mixtures of chemicals that may pose a risk to ecosystems and human health. This contamination cannot be addressed with target analysis alone but tools are required to reduce this complexity and identify those chemicals that might cause adverse

Remote Sensing Combined with Field Spectroscopy for the Detection and Monitoring of Heavy Metal Contamination from Informal E-waste Recycling

Science.gov (United States)

Friedlander, L. R.; Garb, Y.

2017-12-01

Electronic waste (e-waste) is one of today's fastest growing waste streams. Made up of discarded electronics, e-waste disposal is complex. However, e-waste also provides economic opportunity through the processing and extraction of precious metals. Sometimes referred to as "urban mining," this recycling operates informally or illegally and is characterized by dangerous practices such as, open-pit burning, acid leaching, and burning of low value wastes. Poorly controlled e-waste recycling releases dangerous contaminants, especially heavy metals, directly to the surface environment where they can infiltrate water resources and spread through precipitation events. Despite growing recognition of the prevalence of unregulated e-waste processing, systematic data on the extent and persistence of the released contamination is still limited. In general, contamination is established through techniques that provide only a snapshot in time and in a limited geographic area. Here we present preliminary results from attempts to combine field, laboratory, and remote sensing studies toward a systematic remote sensing methodology for e-waste contamination detection and monitoring. The ongoing work utilizes a tragic "natural experiment," in which over 500 e-waste burn sites were active over more than a decade in a variety of agricultural, residential, and natural contexts. We have collected over 100 soil samples for which we have both XRF and ICP-AES measurements showing soil Pb concentrations as high as 14000 ppm. We have also collected 480 in-situ reflectance spectra with corresponding soil samples over 4 field transects of areas with long-term burn activity. The most heavily contaminated samples come from within the burn sites and are made up of ash. Field spectra of these samples reflect their dark color with low overall reflectance and shallow spectral features. These spectra are challenging to use for image classification due to their similarity with other low-reflectance parts

Monitoring occurrence and persistence of Listeria monocytogenes in foods and food processing environments in the Republic of Ireland

Directory of Open Access Journals (Sweden)

Dara eLeong

2014-08-01

Full Text Available Although rates of listeriosis are low in comparison to other foodborne pathogenic illnesses, listeriosis poses a significant risk to human health as the invasive form can have a mortality rate as high as 30%. Food processors, especially those who produce ready-to-eat products, need to be vigilant against Listeria monocytogenes, the causative pathogen of listeriosis, and as such, the occurrence of L. monocytogenes in food and in the food processing environment needs to be carefully monitored. To examine the prevalence and patterns of contamination in food processing facilities in Ireland, 48 food processors submitted 8 samples every 2 months from March 2013 to March 2014 to be analyzed for L. monocytogenes. No positive samples were detected for 38% of the processing facilities tested. Isolates found at the remaining 62% of facilities were characterized by serotyping and Pulsed Field Gel Electrophoresis (PFGE. A general L. monocytogenes prevalence of 4.6% was seen in all samples analyzed with similar rates seen in food and environmental samples. Differences in prevalence were seen across different food processors, food sectors, sampling months etc. and PFGE analysis allowed for the examination of contamination patterns and for the identification of several persistent strains. Seven of the food processing facilities tested showed contamination with persistent strains and evidence of bacterial transfer from the processing environment to food (the same pulsotype found in both was seen in four of the food processing facilities tested.

Monitoring occurrence and persistence of Listeria monocytogenes in foods and food processing environments in the Republic of Ireland.

Science.gov (United States)

Leong, Dara; Alvarez-Ordóñez, Avelino; Jordan, Kieran

2014-01-01

Although rates of listeriosis are low in comparison to other foodborne pathogenic illness, listeriosis poses a significant risk to human health as the invasive form can have a mortality rate as high as 30%. Food processors, especially those who produce ready-to-eat (RTE) products, need to be vigilant against Listeria monocytogenes, the causative pathogen of listeriosis, and as such, the occurrence of L. monocytogenes in food and in the food processing environment needs to be carefully monitored. To examine the prevalence and patterns of contamination in food processing facilities in Ireland, 48 food processors submitted 8 samples every 2 months from March 2013 to March 2014 to be analyzed for L. monocytogenes. No positive samples were detected at 38% of the processing facilities tested. Isolates found at the remaining 62% of facilities were characterized by serotyping and Pulsed Field Gel Electrophoresis (PFGE). A general L. monocytogenes prevalence of 4.6% was seen in all samples analyzed with similar rates seen in food and environmental samples. Differences in prevalence were seen across different food processors, food sectors, sampling months etc. and PFGE analysis allowed for the examination of contamination patterns and for the identification of several persistent strains. Seven of the food processing facilities tested showed contamination with persistent strains and evidence of bacterial transfer from the processing environment to food (the same pulsotype found in both) was seen in four of the food processing facilities tested.

Project on 'contaminations - radiation - ecosystems - health' in Russia

International Nuclear Information System (INIS)

Botov, N.G.; Kozulin, S.P.; Mironova, N.I.; Dubov, R.I.

1993-01-01

This project has two purposes: 1. To determine the influence of the radiation factor among other factors that are increasing human disease and death rate, and are determining industrial impacts to the environment, ecosystems, and people's lives; 2. To ascertain the ecological, medical and social wellbeing of certain contaminated areas in Russia, monitoring and management of radioactive pollution, radioactive waste storage, heavy metals and other contaminants. In our report we present the following: a few experimental data on radioactive contamination; problems of information, experiments and metrology; scientific and technical methods and approaches; financial, equipmental and other needs, that are necessary for successful completion of this Project

Comparison of public health impact of Listeria monocytogenes product-to-product and environment-to-product contamination of deli meats at retail.

Science.gov (United States)

Pradhan, Abani K; Ivanek, Renata; Gröhn, Yrjö T; Bukowski, Robert; Wiedmann, Martin

2011-11-01

This study compared the relative public health impact in deli meats at retail contaminated with Listeria monocytogenes by either (i) other products or (ii) the retail environment. Modeling was performed using the risk of listeriosis-associated deaths as a public health outcome of interest and using two deli meat products (i.e., ham and turkey, both formulated without growth inhibitors) as model systems. Based on reported data, deli meats coming to retail were assumed to be contaminated at a frequency of 0.4%. Three contamination scenarios were investigated: (i) a baseline scenario, in which no additional cross-contamination occurred at retail, (ii) a scenario in which an additional 2.3% of products were cross-contaminated at retail due to transfer of L. monocytogenes cells from already contaminated ready-to-eat deli meats, and (iii) a scenario in which an additional 2.3% of products were contaminated as a result of cross-contamination from a contaminated retail environment. By using a previously reported L. monocytogenes risk assessment model that uses product-specific growth kinetic parameters, cross-contamination of deli ham and turkey was estimated to increase the relative risk of listeriosis-associated deaths by 5.9- and 6.1-fold, respectively, for contamination from other products and by 4.9- and 5.8-fold, respectively, for contamination from the retail environment. Sensitivity and scenario analyses indicated that the frequency of cross-contamination at retail from any source (other food products or environment) was the most important factor affecting the relative risk of listeriosis-associated deaths. Overall, our data indicate that retail-level cross-contamination of ready-to-eat deli meats with L. monocytogenes has the potential to considerably increase the risk of human listeriosis cases and deaths, and thus precise estimates of cross-contamination frequency are critical for accurate risk assessments.

In Situ Analytical Characterization of Contaminated Sites Using Nuclear Spectrometry Techniques. Review of Methodologies and Measurements

International Nuclear Information System (INIS)

2017-01-01

Past and current human activities can result in the contamination of sites by radionuclides and heavy metals. The sources of contamination are various. The most important sources for radionuclide release include global fallout from nuclear testing, nuclear and radiological accidents, waste production from nuclear facilities, and activities involving naturally occurring radioactive material (NORM). Contamination of the environment by heavy metals mainly originates from industrial applications and mineralogical background concentration. Contamination of sites by radionuclides and heavy metals can present a risk to people and the environment. Therefore, the estimation of the contamination level and the identification of the source constitute important information for the national authorities with the responsibility to protect people and the environment from adverse health effects. In situ analytical techniques based on nuclear spectrometry are important tools for the characterization of contaminated sites. Much progress has been made in the design and implementation of portable systems for efficient and effective monitoring of radioactivity and heavy metals in the environment directly on-site. Accordingly, the IAEA organized a Technical Meeting to review the current status and trends of various applications of in situ nuclear spectrometry techniques for analytical characterization of contaminated sites and to support Member States in their national environmental monitoring programmes applying portable instrumentation. This publication represents a comprehensive review of the in situ gamma ray spectrometry and field portable X ray fluorescence analysis techniques for the characterization of contaminated sites. It includes papers on the use of these techniques, which provide useful background information for conducting similar studies, in the following Member States: Argentina, Australia, Brazil, Czech Republic, Egypt, France, Greece, Hungary, Italy, Lithuania

The Advanced Monitoring Systems Initiative--Performance Monitoring for DOE Environmental Remediation and Contaminant Containment

Science.gov (United States)

Haas, W. J.; Venedam, R. J.; Lohrstorfer, C. F.; Weeks, S. J.

2005-05-01

The Advanced Monitoring System Initiative (AMSI) is a new approach to accelerate the development and application of advanced sensors and monitoring systems in support of Department of Energy needs in monitoring the performance of environmental remediation and contaminant containment activities. The Nevada Site Office of the National Nuclear Security Administration (NNSA) and Bechtel Nevada manage AMSI, with funding provided by the DOE Office of Environmental Management (DOE EM). AMSI has easy access to unique facilities and capabilities available at the Nevada Test Site (NTS), including the Hazardous Materials (HazMat) Spill Center, a one-of-a-kind facility built and permitted for releases of hazardous materials for training purposes, field-test detection, plume dispersion experimentation, and equipment and materials testing under controlled conditions. AMSI also has easy access to the facilities and considerable capabilities of the DOE and NNSA National Laboratories, the Special Technologies Laboratory, Remote Sensing Laboratory, Desert Research Institute, and Nevada Universities. AMSI provides rapid prototyping, systems integration, and field-testing, including assistance during initial site deployment. The emphasis is on application. Important features of the AMSI approach are: (1) customer investment, involvement and commitment to use - including definition of needs, desired mode of operation, and performance requirements; and (2) employment of a complete systems engineering approach, which allows the developer to focus maximum attention on the essential new sensing element or elements while AMSI assumes principal responsibility for infrastructure support elements such as power, packaging, and general data acquisition, control, communication, visualization and analysis software for support of decisions. This presentation describes: (1) the needs for sensors and performance monitoring for environmental systems as seen by the DOE Long Term Stewardship Science and

Industrial emerging chemicals in the environment

Directory of Open Access Journals (Sweden)

Vojinović-Miloradov Mirjana B.

2014-01-01

Full Text Available In the recent time, considerable interest has grown concerning the presence of the emerging industrial chemicals, EmIC. They are contaminants that have possible pathway to enter to the environment and they are dominantly released by industrial and anthropogenic activities. EmIC are applied in different fields using as industrial chemicals (new and recently recognized, global organic contaminants (flame retardant chemicals, pharmaceuticals (for both human and animal uses, endocrine-modulating compounds, biological metabolites, personal care products, household chemicals, nanomaterial (energy storage products, lubricants, anticorrosive and agriculture chemicals and others that are applied to a wide variety of everyday items such as clothing, upholstery, electronics and automobile interiors. NORMAN (Network of reference laboratories for monitoring of emerging environmental pollutants has established an open, dynamic, list of emerging substances and pollutants. EmIC have been recently detected in the environment due to their long-term presence, pseudo-persistence and increased use. Improvements in sophisticated analytical methods and time integrative passive sampling have enabled the identification and quantification of EmIC, in very low concentrations (ppb, ppt and lower, which likely have been present in all environmental mediums for decades. Passive technology is an innovative technique for the time-integrated measurement of emerging contaminants in water, sediment, soil and air. Passive samplers are simple handling cost-effective tool that could be used in environmental monitoring programmes. These devices are now being considered as a part of an emerging strategy for monitoring a range of emerging industrial chemicals and priority pollutants in the aquatic environment. EmIC are substances that are not included in the routine monitoring programmes and whose fate, behaviour and (ecotoxicological effects are still not well understood. Emerging

Environment monitoring and residents health condition monitoring of nuclear power plant Bohunice region

International Nuclear Information System (INIS)

Letkovicova, M.; Rehak, R.; Stehlikova, B.; Celko, M.; Hraska, S.; Klocok, L.; Kostial, J.; Prikazsky, V.; Vidovic, J.; Zirko, M.; Beno, T.; Mitosinka, J.

1998-01-01

The report contents final environment evaluation and selected characteristic of residents health physics of nuclear power plant Bohunice region. Evaluated data were elaborated during analytical period 1993-1997.Task solving which results are documented in this final report was going on between 1996- 1998. The report deals in individual stages with the following: Information obtaining and completing which characterize demographic situation of the area for the 1993-1997 period; Datum obtaining and completing which contain selected health physics characteristics of the area residents; Database structures for individual data archiving from monitoring and collection; Brief description of geographic information system for graphic presentation of evaluation results based on topographic base; Digital mapping structure description; Results and evaluation of radionuclide monitoring in environment performed by Environmental radiation measurements laboratory by the nuclear power plant Bohunice for the 1993-1997 period. Demographic situation evaluation and selected health physics characteristics of the area of nuclear power plant residents for the 1993-1997 period are summarized in the final part of the document. Monitoring results and their evaluation is processed in graph, table, text description and map output forms. Map outputs are processed in the geographic information system Arc View GIS 3.0a environment

Contamination of estuaries from failing septic tank systems: difficulties in scaling up from monitored individual systems to cumulative impact.

Science.gov (United States)

Geary, Phillip; Lucas, Steven

2018-02-03

Aquaculture in many coastal estuaries is threatened by diffuse sources of runoff from different land use activities. The poor performance of septic tank systems (STS), as well as runoff from agriculture, may contribute to the movement of contaminants through ground and surface waters to estuaries resulting in oyster contamination, and following their consumption, impacts to human health. In monitoring individual STS in sensitive locations, it is possible to show that nutrients and faecal contaminants are transported through the subsurface in sandy soils off-site with little attenuation. At the catchment scale however, there are always difficulties in discerning direct linkages between failing STS and water contamination due to processes such as effluent dilution, adsorption, precipitation and vegetative uptake. There is often substantial complexity in detecting and tracing effluent pathways from diffuse sources to water bodies in field studies. While source tracking as well as monitoring using tracers may assist in identifying potential pathways from STS to surface waters and estuaries, there are difficulties in scaling up from monitored individual systems to identify their contribution to the cumulative impact which may be apparent at the catchment scale. The processes which may be obvious through monitoring and dominate at the individual scale may be masked and not readily discernible at the catchment scale due to impacts from other land use activities.

Feasibility of using fiber optics for monitoring ground water contaminants

International Nuclear Information System (INIS)

Hirschfeld, T.; Deaton, T.; Milanovich, F.; Klainer, S.M.

1984-06-01

The report contains the results of the initial feasibility study for a research program undertaken to develop the technology needed to use fiber optics for monitoring groundwater contaminants. The technology appears especially well suited to the requirements of detection monitoring where a few indicator parameters can be measured continuously by sensors placed down small-diameter monitoring wells. Data are generated at a remote, centrally located fluorimeter, connected to the sampling sites by inexpensive optical fibers. The analytical method is laser-induced fluorescence which gives the desired sensitivity. The optrode, a chemical system and/or a mechanical device at the distal end of a fiber optic, furnishes the needed specificity. Various fiber and optrode configurations have been evaluated and their applications to groundwater monitoring are discussed. Feasibility is shown for physical measurements such as temperature, pressure and pH. Chemical detection and quantification of the actinides, inorganic and organic chlorides, sulfates, alcohols, aldehydes, pesticides and tracer materials are presented. Finally, it is shown that the need for smaller diameter wells (as compared to conventional sampling methods), and the ability to make up to 50 unattended in situ measurements, using a reasonably priced centralized fluorometer system connected to the sampling sites by inexpensive optical fibers, results in acceptable economy

SIMON: A mobile robot for floor contamination surveys

International Nuclear Information System (INIS)

Dudar, E.; Teese, G.; Wagner, D.

1991-01-01

The Robotics Development group at the Savannah River Site is developing an autonomous robot to perform radiological surveys of potentially contaminated floors. The robot scans floors at a speed of one-inch/second and stops, sounds an alarm, and flashes lights when contamination in a certain area is detected. The contamination of interest here is primarily alpha and beta-gamma. The contamination levels are low to moderate. The robot, a Cybermotion K2A, is radio controlled, uses dead reckoning to determine vehicle position, and docks with a charging station to replenish its batteries and calibrate its position. It has an ultrasonic collision avoidance system as well as two safety bumpers that will stop the robot's motion when they are depressed. Paths for the robot are preprogrammed and the robot's motion can be monitored on a remote screen which shows a graphical map of the environment. The radiation instrument being used is an Eberline RM22A monitor. This monitor is microcomputer based with a serial I/O interface for remote operation. Up to 30 detectors may be configured with the RM22A. For our purposes, two downward-facing gas proportional detectors are used to scan floors, and one upward-facing detector is used for radiation background compensation. SIMON is interfaced with the RM22A in such a way that it scans the floor surface at one-inch/second, and if contamination is detected, the vehicle stops, alarms, and activates a voice synthesizer. Future development includes using the contamination data collected to provide a graphical contour map of a contaminated area. 3 refs

40 CFR 141.62 - Maximum contaminant levels for inorganic contaminants.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Maximum contaminant levels for inorganic contaminants. 141.62 Section 141.62 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Water Regulations: Maximum Contaminant Levels and Maximum Residual Disinfectant Levels § 141.62 Maximum...

Comparison of two freshwater turtle species as monitors of radionuclide and chemical contamination: DNA damage and residue analysis

International Nuclear Information System (INIS)

Meyers-Schoene, L.; Shugart, L.R.; Beauchamp, J.J.; Walton, B.T.

1993-01-01

Two species of turtles that occupy different ecological niches were compared for their usefulness as monitors of freshwater ecosystems where both low-level radioactive and nonradioactive contaminants are present. The pond slider (Trachemys scripta) and common snapping turtle (Chelydra serpentina) were analyzed for the presence of 90 Sr, 137 Cs, 60 Co, and Hg, radionuclides and chemicals known to be present at the contaminated site, and single-strand breaks in liver DNA. The integrity of the DNA was examined by the alkaline unwinding assay, a technique that detects strand breaks as a biological marker of possible exposure to genotoxic agents. This measure of DNA damage was significantly increased in both species of turtles at the contaminated site compared with turtles of the same species at a reference site, and shows that contaminant-exposed populations were under more severe genotoxic stress than those at the reference site. The level of strand breaks observed at the contaminated site was high and in the range reported for other aquatic species exposed to deleterious concentrations of genotoxic agents such as chemicals and ionizing radiation. Statistically significantly higher concentrations of radionuclides and Hg were detected in the turtles from the contaminated area. Mercury concentrations were significantly higher in the more carnivorous snapping turtle compared with the slider; however, both species were effective monitors of the contaminants

Caresoil: A multidisciplinar Project to characterize, remediate, monitor and evaluate the risk of contaminated soils in Madrid (Spain)

Science.gov (United States)

Muñoz-Martín, Alfonso; Antón, Loreto; Granja, Jose Luis; Villarroya, Fermín; Montero, Esperanza; Rodríguez, Vanesa

2016-04-01

Soil contamination can come from diffuse sources (air deposition, agriculture, etc.) or local sources, these last being related to anthropogenic activities that are potentially soil contaminating activities. According to data from the EU, in Spain, and particularly for the Autonomous Community of Madrid, it can be considered that heavy metals, toxic organic compounds (including Non Aqueous Phases Liquids, NAPLs) and combinations of both are the main problem of point sources of soil contamination in our community. The five aspects that will be applied in Caresoil Program (S2013/MAE-2739) in the analysis and remediation of a local soil contamination are: 1) the location of the source of contamination and characterization of soil and aquifer concerned, 2) evaluation of the dispersion of the plume, 3) application of effective remediation techniques, 4) monitoring the evolution of the contaminated soil and 5) risk analysis throughout this process. These aspects involve advanced technologies (hydrogeology, geophysics, geochemistry,...) that require new developing of knowledge, being necessary the contribution of several researching groups specialized in the fields previously cited, as they are those integrating CARESOIL Program. Actually two cases concerning hydrocarbon spills, as representative examples of soil local contamination in Madrid area, are being studied. The first is being remediated and we are monitoring this process to evaluate its effectiveness. In the second location we are defining the extent of contamination in soil and aquifer to define the most effective remediation technique.

Robotics for Long-Term Monitoring

International Nuclear Information System (INIS)

Shahin, Sarkis; Duran, Celso

2002-01-01

While long-term monitoring and stewardship means many things to many people, DOE has defined it as The physical controls, institutions, information, and other mechanisms needed to ensure protection of people and the environment at sites where DOE has completed or plans to complete cleanup (e.g., landfill closures, remedial actions, and facility stabilization). Across the United States, there are thousands of contaminated sites with multiple contaminants released from multiple sources where contaminants have transported and commingled. The U.S. government and U.S. industry are responsible for most of the contamination and are landowners of many of these contaminated properties. These sites must be surveyed periodically for various criteria including structural deterioration, water intrusion, integrity of storage containers, atmospheric conditions, and hazardous substance release. The surveys, however, are intrusive, time-consuming, and expensive and expose survey personnel to radioactive contamination. In long-term monitoring, there's a need for an automated system that will gather and report data from sensors without costly human labor. In most cases, a SCADA (Supervisory Control and Data Acquisition) unit is used to collect and report data from a remote location. A SCADA unit consists of an embedded computer with data acquisition capabilities. The unit can be configured with various sensors placed in different areas of the site to be monitored. A system of this type is static, i.e., the sensors, once placed, cannot be moved to other locations within the site. For those applications where the number of sampling locations would require too many sensors, or where exact location of future problems is unknown, a mobile sensing platform is an ideal solution. In many facilities that undergo regular inspections, the number of video cameras and air monitors required to eliminate the need for human inspections is very large and far too costly. HCET's remote harsh-environment

Components of the environment

International Nuclear Information System (INIS)

Klinda, J.; Lieskovska, Z.

1998-01-01

This report of the Ministry of the Environment of the Slovak Republic deals with the components of the environment. The results of monitoring of air (emission situation), ambient air quality, atmospheric precipitation, tropospheric ozone, water (surface water, groundwater resources, waste water and drinking water), geological factors (geothermal energy, fuel deposits, ore deposits, non-metallic ore deposits), soil (area statistics, soil contamination. soil reaction and active extractable aluminium, soil erosion), flora and fauna (national strategy of biodiversity protection) are presented

A watershed-scale approach to tracing metal contamination in the environment

Science.gov (United States)

Church, Stanley E

1996-01-01

IntroductionPublic policy during the 1800's encouraged mining in the western United States. Mining on Federal lands played an important role in the growing economy creating national wealth from our abundant and diverse mineral resource base. The common industrial practice from the early days of mining through about 1970 in the U.S. was for mine operators to dispose of the mine wastes and mill tailings in the nearest stream reach or lake. As a result of this contamination, many stream reaches below old mines, mills, and mining districts and some major rivers and lakes no longer support aquatic life. Riparian habitats within these affected watersheds have also been impacted. Often, the water from these affected stream reaches is generally not suitable for drinking, creating a public health hazard. The recent Department of Interior Abandoned Mine Lands (AML) Initiative is an effort on the part of the Federal Government to address the adverse environmental impact of these past mining practices on Federal lands. The AML Initiative has adopted a watershed approach to determine those sites that contribute the majority of the contaminants in the watershed. By remediating the largest sources of contamination within the watershed, the impact of metal contamination in the environment within the watershed as a whole is reduced rather than focusing largely on those sites for which principal responsible parties can be found.The scope of the problem of metal contamination in the environment from past mining practices in the coterminous U.S. is addressed in a recent report by Ferderer (1996). Using the USGS1:2,000,000-scale hydrologic drainage basin boundaries and the USGS Minerals Availability System (MAS) data base, he plotted the distribution of 48,000 past-producing metal mines on maps showing the boundaries of lands administered by the various Federal Land Management Agencies (FLMA). Census analysis of these data provided an initial screening tool for prioritization of

Microbial air contamination in indoor environment of a university library.

Science.gov (United States)

Kalwasińska, Agnieszka; Burkowska, Aleksandra; Wilk, Iwona

2012-01-01

The present study was aimed at evaluating the number of bacteria and mould fungi in the indoor and outdoor environment of Toruń University Library. The sampling sites were located in the rooms serving the functions typical of libraries (i.e. in the Main Reading Room, Current Periodicals Reading Room, Collections Conservation Laboratory, Old Prints Storeroom, in rooms serving other (non-library) functions (i.e. main hall, cafeteria, and toilet) as well as outside the library building. The analyses reveal that the concentrations of bacterial as well as fungal aerosols estimated with the use of the impaction method ranged between 10(1)-10(3) CFU·m(-3), which corresponds to the concentrations normally observed in areas of this kind. Evaluation of the hygienic condition of the studied areas was based on the criteria for microbiological cleanliness in interiors submitted by the European Commission in 1993. According to this classification, the air was considered to be heavily or moderately contaminated with bacteria, while the air contamination with mould fungi was described as low or moderate. The air in the Old Prints Storeroom was considered the least contaminated with microbial aerosol.

Development of plastic scintillator based food radioactivity contamination monitoring system

International Nuclear Information System (INIS)

Parihar, A.; Sahani, R.M.; Mahala, V.K.; Vaijapurkar, S.G.

2016-01-01

Radioactivity is naturally present in soil, water and food stuffs. Food can be contaminated after discharge of radioactivity into the environment from industries that concentrate natural radionuclide and from civil or military nuclear operations. The contamination can be in three ways; by direct deposition, through the food chain and induced radioactivity due to exposure of high neutron flux. The health effects on human depend on the type of radionuclide and the length of time people are exposed to it. The studies of fission product behaviour in the food chain have revealed radionuclide Strontium-90, Caesium 137 and Iodine-131 are of major concern. Plastic scintillator is already developed indigenously at Defence Laboratory, Jodhpur. Efforts has been made to develop a portable field instrument using plastic scintillator for assessment of beta ( 90 Sr) and gamma ( 137 Cs and 131 I) radioactivity in food

Comparison of active and passive sampling strategies for the monitoring of pesticide contamination in streams

Science.gov (United States)

Assoumani, Azziz; Margoum, Christelle; Guillemain, Céline; Coquery, Marina

2014-05-01

The monitoring of water bodies regarding organic contaminants, and the determination of reliable estimates of concentrations are challenging issues, in particular for the implementation of the Water Framework Directive. Several strategies can be applied to collect water samples for the determination of their contamination level. Grab sampling is fast, easy, and requires little logistical and analytical needs in case of low frequency sampling campaigns. However, this technique lacks of representativeness for streams with high variations of contaminant concentrations, such as pesticides in rivers located in small agricultural watersheds. Increasing the representativeness of this sampling strategy implies greater logistical needs and higher analytical costs. Average automated sampling is therefore a solution as it allows, in a single analysis, the determination of more accurate and more relevant estimates of concentrations. Two types of automatic samplings can be performed: time-related sampling allows the assessment of average concentrations, whereas flow-dependent sampling leads to average flux concentrations. However, the purchase and the maintenance of automatic samplers are quite expensive. Passive sampling has recently been developed as an alternative to grab or average automated sampling, to obtain at lower cost, more realistic estimates of the average concentrations of contaminants in streams. These devices allow the passive accumulation of contaminants from large volumes of water, resulting in ultratrace level detection and smoothed integrative sampling over periods ranging from days to weeks. They allow the determination of time-weighted average (TWA) concentrations of the dissolved fraction of target contaminants, but they need to be calibrated in controlled conditions prior to field applications. In other words, the kinetics of the uptake of the target contaminants into the sampler must be studied in order to determine the corresponding sampling rate

Radioactive Contamination of Agricultural Products in Poland

International Nuclear Information System (INIS)

Muszynski, W.; Grabowski, D.; Rubel, B.; Kurowski, W.; Swietochowska, J.; Smagala, G.

2003-01-01

Radiological contamination of the environment is caused by nuclear activities on the globe: nuclear weapon tests and the Chernobyl accident. The transfer of radionuclides to the organism via ingestion is one of the sources of doses obtained by people. To assess the doses received by humans the intake of isotopes with daily diet was defined. The concentration of radionuclides in foodstuffs was determined. The network of Service for Measurement of Radioactive Contamination systematically controls all kinds of important agricultural products such as milk, meat, vegetables, fruit, cereals and forest products: mushrooms, blueberries etc. Measurement stations involved in food monitoring act within Sanitary-Epidemiological Stations, Veterinary Hygiene Units and Chemical-Agricultural Stations. All activities are co-ordinated by the Central Laboratory for Radiological Protection. The level of activity of caesium isotopes has regularly been monitored in collected samples originating from different administrative districts of Poland. Since 1994 the 134 Cs concentration has been below the detection limit. The activity of 137 Cs has been measured to determine long-term effect of the accident on the contamination of milk, meat and other foodstuffs. (orig.)

Reclamation of natural, seminatural and agricultural environments following radioactive contamination - A Nordic study

International Nuclear Information System (INIS)

Liland, A.; Strand, P.; Skuterud, L.

2002-01-01

A range of methods, from simple cost benefits analyses to sophisticated decision making systems, are available for assessing the net countermeasure benefits to man contamination of different environments. As part of the Nordic Nuclear Safety Research Programme, an attempt was made to develop a strategy for mid- and long-term reclamation of contaminated cultivated agricultural environments, animals, forests, freshwater and fish, and urban environments. The study focused on the long-lived nuclides 137 Cs and 90 Sr. Also social implications and a sound environmental management should be addressed in the selection of a countermeasure strategy. The considerations of the cultivated agricultural environment included a model of a Nordic environment, with different soil types, land use and crops. When considering countermeasure strategies for animals, both transfer and production rates have to be compared, as the transfer of radiocaesium to animals in cultivated areas is low compared to the transfer in unimproved areas or to wild animals. The countermeasures considered for freshwater were: use of alternative water supply, and ion exchange method, and for freshwater fish: limiting consumption, brining in households, and wet land and lake liming. In urban environments knowledge on the source strengths, relative dose rate at different locations (indoor, outdoor) due to the deposition on different urban surfaces (roofs, walls, paved areas, trees, bushes etc.) is important. For all environments costs and averted doses were estimated for a fallout scenario giving 1 MBq m -2 of 137 Cs. The effectiveness of the different countermeasures was then compared and reclamation strategies suggested. (author)

Monitoring of health and environment by National Uranium Company (NUC)

International Nuclear Information System (INIS)

Georgescu, D.P.; Banciu, O

1998-01-01

Among the activities of geological survey, exploitation and processing of radioactive ore performed by National Uranium Company (NUC) a major attention is paid to personnel medical monitoring, to influences on the public health in the affected zones and also to the impact on environment, based on specific criteria and accomplished by medical and technical institutions having an adequate profile, in conformity with the enforced laws and with recommendations of international authorities on this field. Health monitoring of the active and retired personnel and of population from the affected sites by the NUC activities is done on the basis of a program established in co-operation with the Work Protection Department and the management of the company's subunits. The methodology used at present has the following three stages: 1. Periodical medical examination of the personnel including all the compulsory investigations requested by the Ministry of Health; 2. Annual epidemiology descriptive studies concerning the analysis of the personnel health state; 3. Analytical epidemiologic studies (retrospective and prospective) having the aim of surveying the radiation effects on the human target organs of the exposed personnel and also the impact on the public health in the influenced zones. At present the incidence of professional diseases liked to uranium is no longer a problem. Attention has to be focused to the diseases due to microclimate, noise, intensive physical effort and stress (non-specific chronic breathing diseases, arterial high blood pressure, heart diseases, digestive diseases and neuroses). The paper presents also the environmental factors investigated in connection with the importance which they have in radioactive contamination: air, water, soil, sediments, vegetation, and agricultural products. There are given the results of the tests performed on 25,000 samples and from more then 20,000 radiometric measurements performed between 1975 - 1997 in each subunit of

Monitoring Potential Transport of Radioactive Contaminants in Shallow Ephemeral Channels: FY2017

Energy Technology Data Exchange (ETDEWEB)

Mizell, Steve A. [Desert Research Inst. (DRI), Las Vegas, NV (United States); Campbell, Scott A. [Desert Research Inst. (DRI), Las Vegas, NV (United States); McCurdy, Greg [Desert Research Inst. (DRI), Las Vegas, NV (United States); Miller, Julianne J. [Desert Research Inst. (DRI), Las Vegas, NV (United States)

2018-04-01

The Desert Research Institute (DRI) is conducting a field assessment of the potential for contaminated soil to be transported from the Smoky Site Contamination Area (CA) as a result of storm runoff. This activity supports U.S. Department of Energy (DOE) Environmental Management Nevada Program (EM-NV) efforts to establish post-closure monitoring plans for the Smoky Site Soils Corrective Action Unit (CAU) 550. The work is intended to confirm the likely mechanism of transport and determine the meteorological conditions that might cause the movement of contaminated soils, as well as determine the particle size fraction that is most closely associated with transported radionuclide-contaminated soils. These data will facilitate the design of the appropriate post-closure monitoring program. In 2011, DRI installed a meteorological monitoring station on the west side of the Smoky Site CA and a hydrologic (runoff) monitoring station within the CA, near the east side. Air temperature, wind speed, wind direction, relative humidity, precipitation, solar radiation, barometric pressure, soil temperature, and soil water content are collected at the meteorological station. The maximum, minimum, and average or total values (as appropriate) for each of these parameters are recorded for each 10-minute interval. The maximum, minimum, and average water depth in the flume installed at the hydrology station are also recorded for every 10-minute interval. This report presents data collected from these stations during fiscal year (FY) 2017. During the FY2017 reporting period, the warmest months were June, July, and August and the coldest were December and January. Solar radiation showed the same seasonal trend, although the months with the most solar radiation were May and June. Monthly mean wind speeds were highest in the spring (April and May). Winds were generally from the southwest during the summer and from the northwest throughout the remainder of the year. The monthly average

Monitoring priority substances, other organic contaminants and heavy metals in a volcanic aquifer from different sources and hydrological processes

International Nuclear Information System (INIS)

Estevez, Esmeralda; Cabrera, María del Carmen; Fernández-Vera, Juan Ramón; Molina-Díaz, Antonio; Robles-Molina, José; Palacios-Díaz, María del Pino

2016-01-01

Irrigation with reclaimed water (R) is necessary to guarantee the sustainability of semi-arid areas. Results obtained during a two years monitoring network (2009–2011) in Gran Canaria are presented, including the analysis of chemical parameters, N and S isotopes, priority substances (2008/105/EC, 2013/39/EU), other organic contaminants and heavy metals in groundwater and R used to irrigate a golf course. The aims of this work are to evaluate the contamination in a volcanic aquifer, relate the presence of organic contaminants and heavy metals with the hydrogeochemistry and identify pollution sources in the area. No priority substance exceeded the EU thresholds for surface water, although seventeen were detected in R. The most frequent compounds were hexachlorobenzene, chlorpyrifos ethyl, fluorene, phenanthrene and pyrene. These compounds were detected at low concentration, except chlorpyrifos. Chlorpyrifos ethyl, terbuthylazine, diuron, terbutryn, procymidone, atrazine and propazine exceeded the European threshold concentration for pesticides in groundwater (100 ng L"−"1). Therefore, the priority substances chlorpyrifos ethyl and diuron must be included in monitoring studies. The priority pesticides chlorfenvinphos and diazinon were always detected in R but rarely in groundwater. Besides, the existence of contaminants not related to the current R irrigation has been identified. Absence of environmental problems related to heavy metals can be expected. The relationship among contaminant presence, hydrogeochemistry, including the stable isotopic prints of δ"1"8O, δ"1"5N and δ"3"4S and preferential recharge paths has been described. The coastal well shows high values of EC, nitrate, a variable chemistry, and 50% of organic contaminants detected above 100 ng L"−"1. The well located in the recharge area presents a stable hydrochemistry, the lowest value of δ"1"5N and the lowest contaminants occurrence. The area is an example of a complex volcanic media with

Monitoring priority substances, other organic contaminants and heavy metals in a volcanic aquifer from different sources and hydrological processes

Energy Technology Data Exchange (ETDEWEB)

Estevez, Esmeralda, E-mail: eestevez@proyinves.ulpgc.es [Dpt. Física (GEOVOL), Universidad de Las Palmas de Gran Canaria, 35017 Las Palmas de Gran Canaria, Canary Islands (Spain); Agrifood and Phytopathological Laboratory (Cabildo de Gran Canaria), 35413 Arucas, Canary Islands (Spain); Cabrera, María del Carmen, E-mail: mcarmen.cabrera@ulpgc.es [Dpt. Física (GEOVOL), Universidad de Las Palmas de Gran Canaria, 35017 Las Palmas de Gran Canaria, Canary Islands (Spain); IMDEA Water Institute, Alcalá de Henares, Madrid (Spain); Fernández-Vera, Juan Ramón, E-mail: jrfernandezv@grancanaria.com [Agrifood and Phytopathological Laboratory (Cabildo de Gran Canaria), 35413 Arucas, Canary Islands (Spain); Molina-Díaz, Antonio, E-mail: amolina@ujaen.es [Analytical Chemistry Research Group, Department of Physical and Analytical Chemistry, University of Jaen, 23071 Jaen (Spain); Robles-Molina, José, E-mail: jroblesmol@gmail.com [Analytical Chemistry Research Group, Department of Physical and Analytical Chemistry, University of Jaen, 23071 Jaen (Spain); Palacios-Díaz, María del Pino, E-mail: mp.palaciosdiaz@ulpgc.es [Dpt. de Patología Animal, Producción Animal, Bromatología y Tecnología de los Alimentos (GEOVOL), Universidad de Las Palmas de Gran Canaria, 35413 Arucas, Canary Islands (Spain)

2016-05-01

Irrigation with reclaimed water (R) is necessary to guarantee the sustainability of semi-arid areas. Results obtained during a two years monitoring network (2009–2011) in Gran Canaria are presented, including the analysis of chemical parameters, N and S isotopes, priority substances (2008/105/EC, 2013/39/EU), other organic contaminants and heavy metals in groundwater and R used to irrigate a golf course. The aims of this work are to evaluate the contamination in a volcanic aquifer, relate the presence of organic contaminants and heavy metals with the hydrogeochemistry and identify pollution sources in the area. No priority substance exceeded the EU thresholds for surface water, although seventeen were detected in R. The most frequent compounds were hexachlorobenzene, chlorpyrifos ethyl, fluorene, phenanthrene and pyrene. These compounds were detected at low concentration, except chlorpyrifos. Chlorpyrifos ethyl, terbuthylazine, diuron, terbutryn, procymidone, atrazine and propazine exceeded the European threshold concentration for pesticides in groundwater (100 ng L{sup −1}). Therefore, the priority substances chlorpyrifos ethyl and diuron must be included in monitoring studies. The priority pesticides chlorfenvinphos and diazinon were always detected in R but rarely in groundwater. Besides, the existence of contaminants not related to the current R irrigation has been identified. Absence of environmental problems related to heavy metals can be expected. The relationship among contaminant presence, hydrogeochemistry, including the stable isotopic prints of δ{sup 18}O, δ{sup 15}N and δ{sup 34}S and preferential recharge paths has been described. The coastal well shows high values of EC, nitrate, a variable chemistry, and 50% of organic contaminants detected above 100 ng L{sup −1}. The well located in the recharge area presents a stable hydrochemistry, the lowest value of δ{sup 15}N and the lowest contaminants occurrence. The area is an example of a complex

Combining Modeling and Monitoring to Produce a New Paradigm of an Integrated Approach to Providing Long-Term Control of Contaminants

Science.gov (United States)

Fogwell, T. W.

2009-12-01

Sir David King, Chief Science Advisor to the British government and Cambridge University Professor, stated in October 2005, "The scientific community is considerably more capable than it has been in the past to assist governments to avoid and reduce risk to their own populations. Prime ministers and presidents ignore the advice from the science community at the peril of their own populations." Some of these greater capabilities can be found in better monitoring techniques applied to better modeling methods. These modeling methods can be combined with the information derived from monitoring data in order to decrease the risk of population exposure to dangerous substances and to promote efficient control or cleanup of the contaminants. An introduction is presented of the types of problems that exist for long-term control of radionuclides at DOE sites. A breakdown of the distributions at specific sites is given, together with the associated difficulties. A paradigm for remediation showing the integration of monitoring with modeling is presented. It is based on a feedback system that allows for the monitoring to act as principal sensors in a control system. The resulting system can be optimized to improve performance. Optimizing monitoring automatically entails linking the monitoring with modeling. If monitoring designs were required to be more efficient, thus requiring optimization, then the monitoring automatically becomes linked to modeling. Records of decision could be written to accommodate revisions in monitoring as better modeling evolves. Currently the establishment of a very prescriptive monitoring program fails to have a mechanism for improving models and improving control of the contaminants. The technical pieces of the required paradigm are already available; they just need to be implemented and applied to solve the long-term control of the contaminants. An integration of the various parts of the system is presented. Each part is described, and examples are

Detection and Monitoring of E-Waste Contamination through Remote Sensing and Image Analysis

Science.gov (United States)

Garb, Yaakov; Friedlander, Lonia

2015-04-01

Electronic waste (e-waste) is one of today's fastest growing waste streams, and also one of the more problematic, as this end-of-life product contains precious metals mixed with and embedded in a variety of low value and potentially harmful plastic and other materials. This combination creates a powerful incentive for informal value chains that transport, extract from, and dispose of e-waste materials in far-ranging and unregulated ways, and especially in settings where regulation and livelihood alternatives are sparse, most notably in areas of India, China, and Africa. E-waste processing is known to release a variety of contaminants, such as heavy metals and persistent organic pollutants, including flame retardants, dioxins and furans. In several sites, where the livelihoods of entire communities are dependent on e-waste processing, the resulting contaminants have been demonstrated to enter the hydrological system and food chain and have serious health and ecological effects. In this paper we demonstrate for the first time the usefulness of multi-spectral remote sensing imagery to detect and monitor the release and possibly the dispersal of heavy metal contaminants released in e-waste processing. While similar techniques have been used for prospecting or for studying heavy metal contamination from mining and large industrial facilities, we suggest that these techniques are of particular value in detecting contamination from the more dispersed, shifting, and ad-hoc kinds of release typical of e-waste processing. Given the increased resolution and decreased price of multi-spectral imagery, such techniques may offer a remarkably cost-effective and rapidly responsive means of assessing and monitoring this kind of contamination. We will describe the geochemical and multi-spectral image-processing principles underlying our approach, and show how we have applied these to an area in which we have a detailed, multi-temporal, spatially referenced, and ground

Experiences in monitoring airborne radioactive contamination in JAERI

International Nuclear Information System (INIS)

Ikezawa, Y.; Okamoto, T.; Yabe, A.

1980-01-01

The following results were obtained at the Japan Atomic Energy Research Institute (JAERI) from experience in air monitoring at the hot cells for handling highly radioactive materials, the glove box containing plutonium and the cell for producing 99 Mo. (1) The ratios of activities of airborne dust to those of whole dust were of the order of 10 -2 for the semi-volatile form of 125 Sb, and 10 -3 to 10 -4 for the particulate form of 137 Cs, 144 Ce and 144 Pr, when irradiated fuels were cut in the hot cells. (2) The activity median aerodynamic diameter (AMAD) of airborne particle size distributions varied from O.4 to 15 μm with changing geometric standard deviation (sigmasub(g)) 1.7 to 7, depending on types of metallurgical treatment of fuels and on kinds of work in the cells. (3) A resuspension factor (the ratio of the concentration of airborne contamination to the surface contamination) was found to be 4x10 -8 to approximately 2x10 -7 cm -1 for plutonium oxide deposited on the floor surface. (4) The collection efficiency of the charcoal-loaded filter paper for airborne radioiodine, consisting of 60% inorganic and 40% organic iodide, was over 95% under conditions of relative humidity 40 to approximately 80% and face velocity 50 cm/sec, during the production of 99 Mo. (H.K.)

Are We Underestimating Microplastic Contamination in Aquatic Environments?

Science.gov (United States)

Conkle, Jeremy L.; Báez Del Valle, Christian D.; Turner, Jeffrey W.

2018-01-01

Plastic debris, specifically microplastic in the aquatic environment, is an escalating environmental crisis. Efforts at national scales to reduce or ban microplastics in personal care products are starting to pay off, but this will not affect those materials already in the environment or those that result from unregulated products and materials. To better inform future microplastic research and mitigation efforts this study (1) evaluates methods currently used to quantify microplastics in the environment and (2) characterizes the concentration and size distribution of microplastics in a variety of products. In this study, 50 published aquatic surveys were reviewed and they demonstrated that most ( 80%) only account for plastics ≥ 300 μm in diameter. In addition, we surveyed 770 personal care products to determine the occurrence, concentration and size distribution of polyethylene microbeads. Particle concentrations ranged from 1.9 to 71.9 mg g-1 of product or 1649 to 31,266 particles g-1 of product. The large majority ( > 95%) of particles in products surveyed were less than the 300 μm minimum diameter, indicating that previous environmental surveys could be underestimating microplastic contamination. To account for smaller particles as well as microfibers from synthetic textiles, we strongly recommend that future surveys consider methods that materials < 300 μm in diameter.

Results of monitoring at Olkiluoto in 2010 - Environment

Energy Technology Data Exchange (ETDEWEB)

Haapanen, A. (ed.) [Haapanen Forest Consulting, Vanhakylae (Finland)

2011-10-15

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2010. These summary reports have been published since 2005. The environmental monitoring system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for monitoring the state of the environment during the construction (and later operation) of ONKALO underground rock characterization facility. Part of the monitoring is performed by the company running the nuclear power plants on the island, Teollisuuden Voima Oy (TVO). Monitoring has been carried out for varying periods of time depending on the sector: some monitoring activities performed by TVO originate from the 1970s and the repository-related environmental monitoring of Olkiluoto from the early 2000s. The monitoring programme evolves according to experiences gained from the modelling work and increased understanding of the site. Augmentations in 2010 include one previously unmonitored private drilled well, and sampling of crop plants, aquatic macrophytes, and bottom fauna, as well as soil and water in order to obtain more data on site-specific concentration ratios. In addition to Olkiluoto Island, two so called reference lakes have been included in the sampling. Studies have been going on on one reference mire, as well. Bottom fauna studies of River Eurajoki exist from late 1970s, but have not been presented here before. Dust produced during construction of the third nuclear power unit (OL3), ONKALO and related infrastructure can be seen in the analysis results of needle litter. The construction works and road traffic have a raising effect on the noise levels of the immediate surroundings. The land-use continues to change, but the remaining natural environment resembles other coastal locations. The young age of the soils and the closeness of the sea are reflected in the soil properties. Mammalian fauna on the island is typical of coastal

Results of monitoring at Olkiluoto in 2010 - Environment

International Nuclear Information System (INIS)

Haapanen, A.

2011-10-01

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2010. These summary reports have been published since 2005. The environmental monitoring system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for monitoring the state of the environment during the construction (and later operation) of ONKALO underground rock characterization facility. Part of the monitoring is performed by the company running the nuclear power plants on the island, Teollisuuden Voima Oy (TVO). Monitoring has been carried out for varying periods of time depending on the sector: some monitoring activities performed by TVO originate from the 1970s and the repository-related environmental monitoring of Olkiluoto from the early 2000s. The monitoring programme evolves according to experiences gained from the modelling work and increased understanding of the site. Augmentations in 2010 include one previously unmonitored private drilled well, and sampling of crop plants, aquatic macrophytes, and bottom fauna, as well as soil and water in order to obtain more data on site-specific concentration ratios. In addition to Olkiluoto Island, two so called reference lakes have been included in the sampling. Studies have been going on on one reference mire, as well. Bottom fauna studies of River Eurajoki exist from late 1970s, but have not been presented here before. Dust produced during construction of the third nuclear power unit (OL3), ONKALO and related infrastructure can be seen in the analysis results of needle litter. The construction works and road traffic have a raising effect on the noise levels of the immediate surroundings. The land-use continues to change, but the remaining natural environment resembles other coastal locations. The young age of the soils and the closeness of the sea are reflected in the soil properties. Mammalian fauna on the island is typical of coastal areas in

Radioactivity monitoring of the Irish marine environment 1998 and 1999

International Nuclear Information System (INIS)

Ryan, T.P.; Long, S.; Dowdall, A.; Hayden, E.; Smith, V.; Fegan, M.; Sequeira, S.; Pollard, D.; Cunningham, J.D.

2000-09-01

The safety of the food chain and the protection of the environment are prime concerns of the Irish public. This report presents the results of the marine radioactivity monitoring programme carried out by the Radiological Protection Institute of Ireland (RPII) during 1998 and 1999. The primary objective of the programme is to assess the exposure of the Irish population resulting from radioactive contamination of the Irish marine environment and to estimate the risks to health from this exposure. Discharged radioactive waste from the British Nuclear Fuels plc (BNFL) reprocessing plant at Sellafield continues to be the dominant source of this contamination. In particular, the remobilisation from sediments of historic discharges makes an important contribution to the levels of radioactivity in the seawater of the western Irish Sea. Approximately 300 samples of fish, shellfish, seaweed, seawater and sediment were collected in 1998 and again in 1999. Both the Marine Institute and the Department of the Marine and Natural Resources assisted the Institute with this sampling. The samples were analysed for a range of contaminating radionuclides at the Institute's radio-analytical laboratory. The results show that the radionuclide of greatest dosimetric significance continues to be caesium-137. The activity concentration of this radionuclide in the Irish marine environment has remained relatively stable since the mid 1990s but at a lower level than that observed during the previous two decades. Along the Irish coastline the highest activity concentrations observed are in the north-east. Since 1994 the commissioning and operation of new facilities at Sellafield have resulted in an increase in the discharges of technetium-99 to the Irish Sea. This has been reflected in an increase in the activity concentrations of this radionuclide at all east coast sampling sites between 1994 and 1999. However, the low radiotoxicity of technetium-99 means that it is generally of lesser

Radioactivity monitoring of the Irish marine environment 1998 and 1999

International Nuclear Information System (INIS)

Ryan, T.; Long, S.; Dowdall, A.

2000-09-01

The safety of the food chain and the protection of the environment are prime concerns of the Irish public. This report presents the results of the marine radioactivity monitoring programme carried out by the Radiological Protection Institute of Ireland (RPII) during 1998 and 1999. The primary objective of the programme is to assess the exposure of the Irish population resulting from radioactive contamination of the Irish marine environment and to estimate the risks to health from this exposure. Discharged radioactive waste from the British Nuclear Fuels plc (BNFL) reprocessing plant at Sellafield continues to be the dominant source of this contamination. In particular, the remobilization from sediments of historic discharges makes an important contribution to the levels of radioactivity in the seawater of the western Irish Sea. Approximately 300 samples of fish, shellfish, seaweed, seawater and sediment were collected in 1998 and again in 1999. Both the Marine Institute and the Department of the Marine and Natural Resources assisted the Institute with this sampling. The samples were analysed for a range of contaminating radionuclides at the Institute's radio-analytical laboratory. The results show that the radionuclide of greatest dosimetric significance continues to be caesium-137. The activity concentration of this radionuclide in the Irish marine environment has remained relatively stable since the mid 1990s but at a lower level than that observed during the previous two decades. Along the Irish coastline the highest activity concentrations observed are in the north-east. Since 1994 the commissioning and operation of new facilities at Sellafield have resulted in an increase in the discharges of technetium-99 to the Irish Sea. This has been reflected in an increase in the activity concentrations of this radionuclide at all east coast sampling sites between 1994 and 1999. However, the low radiotoxicity of technetium-99 means that it is generally of lesser

40 CFR 141.51 - Maximum contaminant level goals for inorganic contaminants.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Maximum contaminant level goals for inorganic contaminants. 141.51 Section 141.51 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Maximum Contaminant Level...

40 CFR 141.50 - Maximum contaminant level goals for organic contaminants.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Maximum contaminant level goals for organic contaminants. 141.50 Section 141.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Maximum Contaminant Level...

40 CFR 141.52 - Maximum contaminant level goals for microbiological contaminants.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Maximum contaminant level goals for microbiological contaminants. 141.52 Section 141.52 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Maximum Contaminant Level...

Airborne contamination in the indoor environment and its implications for dose

DEFF Research Database (Denmark)

Andersson, Kasper Grann; Roed, Jørn; Byrne, M.A.

2004-01-01

Previous work has indicated that radiation doses from deposition on human skin, hair and clothing may contribute significantly to the dose received after a major nuclear accident, such as that, which happened at Chernobyl in 1986. The available data was,however, sparse and associated with conside......Previous work has indicated that radiation doses from deposition on human skin, hair and clothing may contribute significantly to the dose received after a major nuclear accident, such as that, which happened at Chernobyl in 1986. The available data was,however, sparse and associated...... on the deposition of contaminant aerosol were examined, and since the previous measurements had indicated that elemental iodine could be a particularly problematiccontaminant, experimental work was additionally undertaken to examine the process of deposition of this species to skin. Since both clearance...... and percutaneous penetration of deposited contaminants could play important roles in determining doses,experimental programmes were dedicated to the identification of parameters of interest in these contexts. Also doses from contamination on different surfaces in the indoor environment have in the past...

Annual report on radioactive discharges and monitoring of the environment 1992. V. 1

International Nuclear Information System (INIS)

1993-01-01

This Annual Report supplements and updates the Company's Environment Annual Report by providing more detailed information on radioactive discharges, monitoring of the environment and critical group doses. BNFL has published Annual Reports on Radioactive Discharges and Monitoring of the Environment since 1977. This year the report is again sub-divided into two complementary volumes. Volume I consists of site papers, one for each of the Company's sites and includes annual data on radioactive discharges into the environment and the associated environmental monitoring programmes. Critical group doses for each site are presented in summary tables at the beginning of each Site paper. Volume II reproduces the Certificates of Authorisation regulating the Company's discharges and the statutory environmental monitoring programmes which relate to them. (Author)

A General LC-MS/MS Method for Monitoring Potential β-Lactam Contamination in Drugs and Drug-Manufacturing Surfaces.

Science.gov (United States)

Qiu, Chen; Zhu, Hongbin; Ruzicka, Connie; Keire, David; Ye, Hongping

2018-05-15

Penicillins and some non-penicillin β-lactams may cause potentially life-threatening allergic reactions. Thus, possible cross contamination of β-lactams in food or drugs can put people at risk. Therefore, when there is a reasonable possibility that a non-penicillin product could be contaminated by penicillin, the drug products are tested for penicillin contamination. Here, a sensitive and rapid method for simultaneous determination of multiple β-lactam antibiotics using high performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed and validated. Mass spectral acquisition was performed on a Q-Exactive HF mass spectrometer in positive ion mode with parallel reaction monitoring (PRM). The method was validated for seven β-lactam antibiotics including one or two from each class and a synthetic intermediate. The quantification precision and accuracy at 200 ppb were in the range of ± 1.84 to ± 4.56 and - 5.20 to 3.44%, respectively. The limit of detection (LOD) was 0.2 ppb, and the limit of quantitation (LOQ) was 2 ppb with a linear dynamic range (LDR) of 2-2000 ppb for all eight β-lactams. From various drug products, the recoveries of eight β-lactams at 200 and 2 ppb ranged from 93.8 ± 3.2 to 112.1 ± 4.2% and 89.7 ± 4.6 to 110.6 ± 1.9%, respectively. The application of the method for detecting cross contamination of trace β-lactams (0.2 ppb) and for monitoring facility surface cleaning was also investigated. This sensitive and fast method was fit-for-purpose for detecting and quantifying trace amount of β-lactam contamination, monitoring cross contamination in manufacturing processes, and determining potency for regulatory purposes and for quality control.

Atmospheric contamination

International Nuclear Information System (INIS)

Gruetter, Juerg

1997-01-01

It is about the levels of contamination in center America, the population's perception on the problem, effects of the atmospheric contamination, effects in the environment, causes of the atmospheric contamination, possibilities to reduce the atmospheric contamination and list of Roeco Swisscontac in atmospheric contamination

An integrated environment monitoring system for underground coal mines--Wireless Sensor Network subsystem with multi-parameter monitoring.

Science.gov (United States)

Zhang, Yu; Yang, Wei; Han, Dongsheng; Kim, Young-Il

2014-07-21

Environment monitoring is important for the safety of underground coal mine production, and it is also an important application of Wireless Sensor Networks (WSNs). We put forward an integrated environment monitoring system for underground coal mine, which uses the existing Cable Monitoring System (CMS) as the main body and the WSN with multi-parameter monitoring as the supplementary technique. As CMS techniques are mature, this paper mainly focuses on the WSN and the interconnection between the WSN and the CMS. In order to implement the WSN for underground coal mines, two work modes are designed: periodic inspection and interrupt service; the relevant supporting technologies, such as routing mechanism, collision avoidance, data aggregation, interconnection with the CMS, etc., are proposed and analyzed. As WSN nodes are limited in energy supply, calculation and processing power, an integrated network management scheme is designed in four aspects, i.e., topology management, location management, energy management and fault management. Experiments were carried out both in a laboratory and in a real underground coal mine. The test results indicate that the proposed integrated environment monitoring system for underground coal mines is feasible and all designs performed well as expected.

An Integrated Environment Monitoring System for Underground Coal Mines—Wireless Sensor Network Subsystem with Multi-Parameter Monitoring

Science.gov (United States)

Zhang, Yu; Yang, Wei; Han, Dongsheng; Kim, Young-Il

2014-01-01

Environment monitoring is important for the safety of underground coal mine production, and it is also an important application of Wireless Sensor Networks (WSNs). We put forward an integrated environment monitoring system for underground coal mine, which uses the existing Cable Monitoring System (CMS) as the main body and the WSN with multi-parameter monitoring as the supplementary technique. As CMS techniques are mature, this paper mainly focuses on the WSN and the interconnection between the WSN and the CMS. In order to implement the WSN for underground coal mines, two work modes are designed: periodic inspection and interrupt service; the relevant supporting technologies, such as routing mechanism, collision avoidance, data aggregation, interconnection with the CMS, etc., are proposed and analyzed. As WSN nodes are limited in energy supply, calculation and processing power, an integrated network management scheme is designed in four aspects, i.e., topology management, location management, energy management and fault management. Experiments were carried out both in a laboratory and in a real underground coal mine. The test results indicate that the proposed integrated environment monitoring system for underground coal mines is feasible and all designs performed well as expected. PMID:25051037

An Integrated Environment Monitoring System for Underground Coal Mines—Wireless Sensor Network Subsystem with Multi-Parameter Monitoring

Directory of Open Access Journals (Sweden)

Yu Zhang

2014-07-01

Full Text Available Environment monitoring is important for the safety of underground coal mine production, and it is also an important application of Wireless Sensor Networks (WSNs. We put forward an integrated environment monitoring system for underground coal mine, which uses the existing Cable Monitoring System (CMS as the main body and the WSN with multi-parameter monitoring as the supplementary technique. As CMS techniques are mature, this paper mainly focuses on the WSN and the interconnection between the WSN and the CMS. In order to implement the WSN for underground coal mines, two work modes are designed: periodic inspection and interrupt service; the relevant supporting technologies, such as routing mechanism, collision avoidance, data aggregation, interconnection with the CMS, etc., are proposed and analyzed. As WSN nodes are limited in energy supply, calculation and processing power, an integrated network management scheme is designed in four aspects, i.e., topology management, location management, energy management and fault management. Experiments were carried out both in a laboratory and in a real underground coal mine. The test results indicate that the proposed integrated environment monitoring system for underground coal mines is feasible and all designs performed well as expected.

Results of Monitoring at Olkiluoto in 2004. Environment

International Nuclear Information System (INIS)

Haapanen, R.

2005-07-01

This report presents the main results of the environmental monitoring programme connected with Posiva Oy's activities on Olkiluoto island. This is the first annual report and covers the years 2004 and partly 2003. Monitoring has been carried out for varying time periods depending on the sector: some monitoring activities performed by TVO originate from the 1970s, others connected with the construction of the final disposal repository for nuclear waste and the underground research facility ONKALO are about to start. The system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for environmental impact analyses. No unexplainable deviations from reference data were seen in the results presented in this report. The vegetation, forests, soils and animal life are typical of a coastal region within the same vegetation zone. The nearby marine environment is affected by the cooling water from the nuclear power plant, to varying extents depending on the organism and the distance. Monitoring of marine environments as well as radionuclide analyses at the moment produce reference data for the future and create a basis for the construction of a model, as no input from Posiva's activities will influence these areas for a long time. (orig.)

Crack Growth Monitoring in Harsh Environments by Electric Potential Measurements

International Nuclear Information System (INIS)

Lloyd, Wilson Randolph; Reuter, Walter Graham; Weinberg, David Michael

1999-01-01

Electric potential measurement (EPM) technology offers an attractive alternative to conventional nondestructive evaluation (NDE) for monitoring crack growth in harsh environments. Where conventional NDE methods typically require localized human interaction, the EPM technique developed at the Idaho National Engineering and Environmental Laboratory (INEEL) can be operated remotely and automatically. Once a crack-like defect is discovered via conventional means, EPM can be applied to monitor local crack size changes. This is of particular interest in situations where an identified structural defect is not immediately rejectable from a fitness-for-service viewpoint, but due to operational and environmental conditions may grow to an unsafe size with continuing operation. If the location is in a harsh environment where periodic monitoring by normal means is either too costly or not possible, a very expensive repair may be immediately mandated. However, the proposed EPM methodology may offer a unique monitoring capability that would allow for continuing service. INEEL has developed this methodology, supporting equipment, and calibration information to apply EPM in a field environment for just this purpose. Laboratory and pilot scale tests on full-size engineering structures (pressure vessels and piping) have been successfully performed. The technique applicable is many severe environments because the sensitive equipment (electronics, operators) can be situated in a remote location, with only current and voltage probe electrical leads entering into the harsh environment. Experimental results showing the utility of the methodology are presented, and unique application concepts that have been examined by multiple experiments are discussed

System for ecological monitoring and assessment for NPP site environment

International Nuclear Information System (INIS)

Vorob'ev, E.I.; Olejnikov, N.F.; Reznichenko, V.Yu.

1987-01-01

On the basis of the Leningrad NPP named after V.I. Lenin the development of a system for ecological monitoring and assessment (EMA) of the environment state and health of personnel and population has started in the EMA program framework. The program of ecological monitoring and assessment coordinates the works on the study of NPP effect on the nature and people, effect of separate factors and their combination, methods and models for the description of the effects, forecasting and evaluation, selection of the optimal protection strategies. Scientific foundations, structure and content of the EMA program are given to coordinate the works carried out according to the program with other works carried out in the country in this direction. The paper deals with the composition of monitoring parameters of the standard system of ecological monitoring of the environment for NPP

Annual report on radioactive discharges and monitoring of the environment 1991. V. 1

International Nuclear Information System (INIS)

1992-01-01

This Annual Report supplements and updates British Nuclear Fuel plc's Health and Safety and the Environment Annual Report by providing more detailed information on radioactive discharges, monitoring of the environment and critical groups doses. BNFL has published Annual Reports on Radioactive Discharges and Monitoring of the Environment since 1977. This year the report is again sub-divided into two complementary volumes. Volume I includes, for each of the Company's sites, annual data on radioactive discharges into the environment and the associated environmental monitoring programmes. Critical groups doses for each site are presented in summary tables at the beginning of each chapter. (author)

40 CFR 141.63 - Maximum contaminant levels (MCLs) for microbiological contaminants.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Maximum contaminant levels (MCLs) for microbiological contaminants. 141.63 Section 141.63 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Water Regulations: Maximum Contaminant Levels and Maximum Residual Disinfectant Levels § 141.63 Maximum...

Exercise of laboratory comparison for contamination monitor calibration between LNMRI/IRD and LCR/UERJ - 2016

International Nuclear Information System (INIS)

Cabral, T.S.; David, M.

2016-01-01

This work was motivated by the need to decide on the best methodology to be applied in the next contamination monitor calibration comparisons with the Brazilian network of calibration radiation monitors. The calibration factor was chosen as a response calibration performed in the four monitors used in this comparison because it does not require the detector area or probe thereby reducing an important variable. It was observed that the variation of the positioning system may have an influence up to 10% in calibration. The results obtained for the calibration factor showed a difference of up to 31.2%. (author)

Air Monitoring Leads to Discovery of New Contamination at Radioactive Waste Disposal Site (Area G) at Los Alamos National Laboratory

International Nuclear Information System (INIS)

Kraig, D.H.; Conrad, R.C.

1999-01-01

Air monitoring at Area G, the low-level radioactive waste disposal area at Los Alamos National Laboratory, revealed increased air concentrations of 239 Pu and 241 Am at one location along the north boundary. This air monitoring location is a couple of meters north of a dirt road used to access the easternmost part of Area G. Air concentrations of 238 Pu were essentially unaffected, which was puzzling because the 238 Pu and 239 Pu are present in the local, slightly contaminated soils. Air concentrations of these radionuclides increased about a factor of ten in early 1995 and remained at those levels until the first quarter of 1996. During the spring of 1996 air concentrations again increased by a factor of about ten. No other radionuclides were elevated and no other Area G stations showed elevations of these radionuclides. After several formal meetings didn't provide an adequate cause for the elevations, a gamma survey was performed and showed a small area of significant contamination just south of the monitor location. We found in February, 1995, a trench for a water line had been dug within a meter of so of the air stations. Then, during early 1996, the dirt road was rerouted such that its new path was directly over the unknown contamination. It appears that the trenching brought contaminated material to the surface and caused the first rise in air concentrations and then the rerouting of the road over the contamination caused the second rise, during 1996. We also found that during 1976 and 1977 contaminated soils from the clean-up of an old processing facility had been spread over the filled pits in the vicinity of the air monitors. These soils were very low in 238Pu which explains why we saw very little 238 Pu in the increased air concentrations. A layer of gravel and sand was spread over the contaminated area. Although air concentrations of 239 Pu and 241 Am dropped considerably, the y have not returned to pre-1995 levels

Metagenomic frameworks for monitoring antibiotic resistance in aquatic environments.

Science.gov (United States)

Port, Jesse A; Cullen, Alison C; Wallace, James C; Smith, Marissa N; Faustman, Elaine M

2014-03-01

High-throughput genomic technologies offer new approaches for environmental health monitoring, including metagenomic surveillance of antibiotic resistance determinants (ARDs). Although natural environments serve as reservoirs for antibiotic resistance genes that can be transferred to pathogenic and human commensal bacteria, monitoring of these determinants has been infrequent and incomplete. Furthermore, surveillance efforts have not been integrated into public health decision making. We used a metagenomic epidemiology-based approach to develop an ARD index that quantifies antibiotic resistance potential, and we analyzed this index for common modal patterns across environmental samples. We also explored how metagenomic data such as this index could be conceptually framed within an early risk management context. We analyzed 25 published data sets from shotgun pyrosequencing projects. The samples consisted of microbial community DNA collected from marine and freshwater environments across a gradient of human impact. We used principal component analysis to identify index patterns across samples. We observed significant differences in the overall index and index subcategory levels when comparing ecosystems more proximal versus distal to human impact. The selection of different sequence similarity thresholds strongly influenced the index measurements. Unique index subcategory modes distinguished the different metagenomes. Broad-scale screening of ARD potential using this index revealed utility for framing environmental health monitoring and surveillance. This approach holds promise as a screening tool for establishing baseline ARD levels that can be used to inform and prioritize decision making regarding management of ARD sources and human exposure routes. Port JA, Cullen AC, Wallace JC, Smith MN, Faustman EM. 2014. Metagenomic frameworks for monitoring antibiotic resistance in aquatic environments. Environ Health Perspect 122:222–228; http://dx.doi.org/10.1289/ehp

An 'artificial mussel' for monitoring heavy metals in marine environments

International Nuclear Information System (INIS)

Wu, Rudolf S.S.; Lau, T.C.; Fung, Wendy K.M.; Ko, P.H.; Leung, Kenneth M.Y.

2007-01-01

A new chemical sampling device, artificial mussel (AM), has been developed for monitoring metals in marine environments. This device consists of a polymer ligand suspended in artificial seawater within a Perspex tubing, and enclosed with semi-permeable gel at both ends. Laboratory and field experiments were carried out to examine the uptake of five metals (Cd, Cr, Cu, Pb and Zn) by the AM. Uptake of metals by AM was proportional to the exposure metal concentrations, and the AM was able to accumulate the ASV labile fractions of metals. Uptake and release of the metals of AM are similar to those of the mussel Perna viridis, but less affected by salinity and temperature. Field studies demonstrated that the AM can not only provide a time-integrated estimate of metals concentrations, but also allows comparisons of metal levels in different environments and geographical areas beyond the natural distribution limits of biomonitors. - A new monitoring device to provide a time-integrated estimate for monitoring metals in marine environments

Overview of the LHD central control room data monitoring environment

International Nuclear Information System (INIS)

Emoto, M.; Yoshinuma, M.; Yoshida, M.; Nakanishi, H.; Iwata, C.; Ohsuna, M.; Nonomura, M.; Imazu, S.; Yokota, M.; Aoyagi, M.; Ogawa, H.; Ida, K.; Watanabe, K.; Kaneko, O.

2016-01-01

Highlights: • In this paper, the data monitoring environments in the LHD central control room, for example, summary data graph and video monitoring tools are introduced. Also, the environments for the remote participants are introduced. - Abstract: During the Large Helical Device (LHD) experiments, many scientists and technical staff are working in the central control room to operate the experiment. They must manage the diagnostics and controlling devices referring to the results of the last plasma shot. Also, the experiment coordinator must decide the conditions for the subsequent experiments using the results. Furthermore, many scientists are participating in the experiment from remote sites. Therefore, it is important to share the information in the control room quickly, such as the results of the last plasma discharge, with the remote user as well as with the staff in the room. In this paper, the data monitoring environment in the LHD central control room is introduced.

Overview of the LHD central control room data monitoring environment

Energy Technology Data Exchange (ETDEWEB)

Emoto, M., E-mail: emoto.masahiko@nifs.ac.jp; Yoshinuma, M.; Yoshida, M.; Nakanishi, H.; Iwata, C.; Ohsuna, M.; Nonomura, M.; Imazu, S.; Yokota, M.; Aoyagi, M.; Ogawa, H.; Ida, K.; Watanabe, K.; Kaneko, O.

2016-11-15

Highlights: • In this paper, the data monitoring environments in the LHD central control room, for example, summary data graph and video monitoring tools are introduced. Also, the environments for the remote participants are introduced. - Abstract: During the Large Helical Device (LHD) experiments, many scientists and technical staff are working in the central control room to operate the experiment. They must manage the diagnostics and controlling devices referring to the results of the last plasma shot. Also, the experiment coordinator must decide the conditions for the subsequent experiments using the results. Furthermore, many scientists are participating in the experiment from remote sites. Therefore, it is important to share the information in the control room quickly, such as the results of the last plasma discharge, with the remote user as well as with the staff in the room. In this paper, the data monitoring environment in the LHD central control room is introduced.

Quantification of transmission of foot-and-mouth disease virus caused by an environment contaminated with secretions and excretions from infected calves

NARCIS (Netherlands)

Bravo De Rueda, C.; Jong, de M.; Eblé, P.L.; Dekker, A.

2015-01-01

Foot-and-mouth disease virus (FMDV) infected animals can contaminate the environment with their secretions and excretions. To quantify the contribution of a contaminated environment to the transmission of FMDV, this study used calves that were not vaccinated and calves that were vaccinated 1 week

Environmental Contamination Genetic Consequences Monitoring on the Former Semipalatinsk Test Site: General Approach

International Nuclear Information System (INIS)

Seisebaev, A.T.; Bakhtin, M.M.; Zhapbasov, R.Zh.

1998-01-01

For an objective assessment of nuclear test consequences for the environment it is necessary, together with the investigation of radiation situation, to study live biological systems, particularly the genetic effects of chronic ionizing radiation. The long staying of plants and animals on the territories with the elevated radiation background level can lead to the change of organism genetic system. In this connection the monitoring of chronically exposed natural populations is of particular interest and can serve as the objective indicator of the scale of natural biota genetic damage. Basing on the results obtained during plant and animal studies one can indirectly assess the hazard of people genetic damage. Besides, studying the mutational process on natural populations exposed to the chronic ionizing radiation one can reveal new regularities, which are impossible to be detected in the laboratory conditions, and new aspects of radiation genetics. The issue of radiation adaptation of organisms affected by the various doses of ionizing radiation is very acute. The prerequisite of organism adaptation to the certain radiation background is genetic heterogeneity of individuals comprising the population and selection of radiation-induced individuals, which are the carriers of the mutation of high radioresistance. The uniqueness of the Semipalatinsk Test site and the necessity of long-term investigations of the nuclear test consequences for the environment demand the elaboration of principles for organization and utilization of natural population genetic monitoring. Radiation-genetic monitoring is the long-term observation of palpitation gene pool conditions, assessment and forecast of their spatial and time alteration, determination of limits of changes admitted under the condition of environmental radioactive contamination. It includes a series of the main research directions and has quite certain methodological peculiarities. In this paper we discuss the tasks of

Remediating and Monitoring White Phosphorus Contamination at Eagle River Flats (Operable Unit C), Fort Richardson, Alaska

National Research Council Canada - National Science Library

Walsh, M. E; Racine, C. H; Collins, C. M; Walsh, M. R; Bailey, R. N

2001-01-01

.... Army Engineer District, Alaska, and U.S. Army Alaska, Public Works, describing the results of research, monitoring, and remediation efforts addressing the white phosphorus contamination in Eagle River Flats, an 865-ha estuarine salt marsh...

Mold contamination in a controlled hospital environment: a 3-year surveillance in southern Italy.

Science.gov (United States)

Caggiano, Giuseppina; Napoli, Christian; Coretti, Caterina; Lovero, Grazia; Scarafile, Giancarlo; De Giglio, Osvalda; Montagna, Maria Teresa

2014-11-15

Environmental monitoring of airborne filamentous fungi is necessary to reduce fungal concentrations in operating theaters and in controlled environments, and to prevent infections. The present study reports results of a surveillance of filamentous fungi carried out on samples from air and surfaces in operating theaters and controlled environments in an Italian university hospital. Sampling was performed between January 2010 and December 2012 in 32 operating theaters and five departments with high-risk patients. Indoor air specimens were sampled using a microbiological air sampler; Rodac contact plates were used for surface sampling. Fungal isolates were identified at the level of genera and species. Sixty-one samples (61/465; 13.1%) were positive for molds, with 18 from controlled environments (18/81; 22.2%) and 43 (43/384; 11.2%) from operating theaters. The highest air fungal load (AFL, colony-forming units per cubic meter [CFU/m(3)]) was recorded in the ophthalmology operating theater, while the pediatric onco-hematology ward had the highest AFL among the wards (47 CFU/m(3)). The most common fungi identified from culture of air specimens were Aspergillus spp. (91.8%), Penicillium spp., (6%) and Paecilomyces spp. (1.5%). During the study period, a statistically significant increase in CFU over time was recorded in air-controlled environments (p = 0.043), while the increase in AFL in operating theaters was not statistically significant (p = 0.145). Molds were found in 29.1% of samples obtained from surfaces. Aspergillus fumigatus was the most commonly isolated (68.5%). Our findings will form the basis for action aimed at improving the air and surface quality of these special wards. The lack of any genetic analysis prevented any correlation of fungal environmental contamination with onset of fungal infection, an analysis that will be undertaken in a prospective study in patients admitted to the same hospital.

Radioactive contamination in the Arctic - Present situation and future challenges

International Nuclear Information System (INIS)

Strand, P.

2002-01-01

There is currently a focus on radioactivity and the Arctic region. The reason for this is the high number of nuclear sources in parts of the Arctic and the vulnerability of Arctic systems to radioactive contamination. The Arctic environment is also perceived as a wilderness and the need for the protection of this wilderness against contamination is great. In 1991, the International Arctic Environmental Protection Strategy (IAEPS) was launched and the Arctic Monitoring and Assessment Programme (AMAP) established. AMAP is undertaking an assessment of the radioactive contamination of the Arctic and its radiological consequences. This paper summarises some of current knowledge about sources of radioactive contamination, vulnerability, exposure of man, and potential sources for radioactive contamination within Arctic and some views on the future needs for work concerning radioactivity in Arctic. (author)

Tools for monitoring aquatic environments to identify anthropic effects.

Science.gov (United States)

da Rocha, Monyque Palagano; Dourado, Priscila Leocadia Rosa; Cardoso, Claudia Andrea Lima; Cândido, Liliam Silva; Pereira, Joelson Gonçalves; de Oliveira, Kelly Mari Pires; Grisolia, Alexeia Barufatti

2018-01-05

Anthropic activities are directly related to the contamination of aquatic ecosystems owing to the release of numerous chemicals from agricultural and urban waste. These contaminants cause environmental degradation and a decrease in the availability of water quality. The objective of this search was to evaluate the efficiency of physicochemical, chemical, and microbiological tests; extraction of chlorophyll a; and genetic parameters to identify anthropic activities and weather condition effects on the stream water quality and the consequences of its use by the population. The physicochemical parameters were within the limits allowed by the Brazilian law. However, contamination by metals (Cd 0.510 mg L -1 , Co 0.405 mg L -1 , and Ni 0.316 mg L -1 ) has been found at various collection points to be more than the allowable values. The antibiotic oxytetracycline was detected in stream water in quantities of up to 89 μg L -1 . In relation to microbiological contamination, Escherichia coli and Pseudomonas spp. have been isolated. The averages of chlorophyll a were up to 0.15558 mg cm -2 . Genetic tools identified greater number of micronuclei and DNA damage in periods that showed lower rainfall rates and lower amounts of metals. The analysis used for monitoring was efficient to verify the interference that animal breeding and planting of different cultures have caused on that stream. Thus, the continued use of this water for drinking, irrigation of vegetables, and recreational activities makes the population susceptible to contamination by bacteria and creates conditions for the development of genetic alterations in the long run.

Annual report on radioactive discharges and monitoring of the environment 1992. V. 1

International Nuclear Information System (INIS)

1993-01-01

This Annual Report supplements the Company's Health and Safety Annual Report by providing more detailed information on radioactive discharges, monitoring of the environment and critical group doses. BNFL has published Annual Reports on Radioactive Discharges and Monitoring of the Environment, covering the period from 1977 to the present. For 1990 this report has been sub-divided into two complementary parts. Volume I includes annual data for each of the Company sites on radioactive discharges into the environment and the associated environmental monitoring programmes. Volume II reproduces the Certificates of Authorisation under which the Company operates and the statutory environmental monitoring programmes which relate to them. (author)

Annual report on radioactive discharges and monitoring of the environment 1990. V. 1

International Nuclear Information System (INIS)

1991-01-01

This Annual Report supplements the Company's Health and Safety Annual Report by providing more detailed information on radioactive discharges, monitoring of the environment and critical group doses. BNFL has published Annual Reports on Radioactive Discharges and Monitoring of the Environment, covering the period from 1977 to the present. For 1990 this report has been sub-divided into two complementary parts. Volume I includes annual data for each of the Company sites on radioactive discharges into the environment and the associated environmental monitoring programmes. Volume II reproduces the Certificates of Authorisation under which the Company operates and the statutory environmental monitoring programmes which relate to them. (author)

Annual report on radioactive discharges and monitoring of the environment 1990. V. 2

International Nuclear Information System (INIS)

1991-01-01

This Annual Report supplements the Company's Health and Safety Annual Report by providing more detailed information on radioactive discharges, monitoring of the environment and critical group doses. BNFL has published Annual Reports on Radioactive Discharges and Monitoring of the Environment, covering the period from 1977 to the present. For 1990 this report has been sub-divided into two complementary parts. Volume I includes annual data for each of the Company sites on radioactive discharges into the environment and the associated environmental monitoring programmes. Volume II reproduces the Certificates of Authorisation under which the Company operates and the statutory environmental monitoring programmes which relate to them. (author)

Efficacy monitoring of in situ fuel bioremediation

International Nuclear Information System (INIS)

Mueller, J.; Borchert, S.; Heard, C.

1996-01-01

The wide-scale, multiple-purpose use of fossil fuels throughout the industrialized world has resulted in the inadvertent contamination of myriad environments. Given the scope and magnitude of these environmental contamination problems, bioremediation often represents the only practical and economically feasible solution. This is especially true when depth of contamination, magnitude of the problem, and nature of contaminated material preclude other remedial actions, short of the no-response alternative. From the perspective, the effective, safe and scientifically valid use of in situ bioremediation technologies requires cost-efficient and effective implementation strategies in combination with unequivocal approaches for monitoring efficacy of performance. Accordingly, with support from the SERDP program, the authors are field-testing advanced in situ bioremediation strategies and new approaches in efficacy monitoring that employ techniques instable carbon and nitrogen isotope biogeochemistry. One field demonstration has been initiated at the NEX site in Port Hueneme, CA (US Navy's National Test Site). The objectives are: (1) to use stable isotopes as a biogeochemical monitoring tool for in situ bioremediation of refined petroleum (i.e., BTEX), and (2) to use vertical groundwater circulation technology to effect in situ chemical containment and enhanced in situ bioremediation

Fourth report on the Oak Ridge National Laboratory Biological Monitoring and Abatement Program for White Oak Creek Watershed and the Clinch River

Energy Technology Data Exchange (ETDEWEB)

Loar, J.M. [ed.

1994-04-01

In response to a condition of the National Pollutant Discharge Elimination System (NPDES) permit issued to Oak Ridge National Laboratory (ORNL) on April 1, 1986, a Biological Monitoring and Abatement Program (BMAP) was developed for White Oak Creek (WOC) and selected tributaries. BMAP currently consists of six major tasks that address both radiological and nonradiological contaminants in the aquatic and terrestrial environs on-site and the aquatic environs off-site. These tasks are (1) toxicity monitoring, (2) bioaccumulation monitoring of nonradiological contaminants in aquatic biota, (3) biological indicator studies, (4) instream ecological monitoring, (5) assessment of contaminants in the terrestrial environment, and (6) radioecology of WOC and White Oak Lake. The ecological characterization of the WOC watershed will provide baseline data that can be used to document the ecological effects of the water pollution control program and the remedial action program. The long-term nature of BMAP ensures that the effectiveness of remedial measures will be properly evaluated.

Progress in the domain of emissions tracking and environment radioactivity monitoring - Proceedings of the technical days organised by the SFRP Environment Section

International Nuclear Information System (INIS)

Calmet, Dominique; Calvez, Marianne; Rivasseau, Corinne Cea; Monfort, Marguerite; Manificat, Guillaume; Pierrard, Olivier; Couvez, Celine; Masson, Olivier; Bruno, Valerie; Renaud, Philippe; Genova, Zhana; Reynal, Nathalie; Le Coz, Eric; Tchilian, Nathalie; Diana, Jean-Jacques; Beguinel, Philippe; Cortes, Pierre; Puydarrieux, Stephane; Brun, Thierry; Devin, Patrick; Clavel, Benoit; Hemidy, Pierre-Yves; Gontier, Gilles; Delloye, Thierry; Mailliat, Alain; Ferreri, Giovanni; LECLERC, Elisabeth

2015-11-01

The Environment Section of the French Society of Radiation Protection (SFRP) organized a technical meeting on the progress made in the domain of emissions tracking and environment radioactivity monitoring. This document brings together the abstracts and the presentations (slides) of the different talks given at the meeting: 1 - Environment monitoring at the global, national and local scale: historical overview (Dominique CALMET, CEA); 2 - Evolution of radioactivity monitoring in the environment from 1960 to the present day (Guillaume MANIFICAT, IRSN); 3 - Euratom's legal framework (Zhana GENOVA, CTE); 4 - Main regulatory changes during the last decade (Nathalie REYNAL, ASN); 5 - Progress of standardization works on radioactive effluent emissions control and environment monitoring (Philippe BEGUINEL, BNEN); 6 - From operators' self-monitoring to ASN's inspections: a many components control system (Eric LE COZ, ASN); 7 - Control of effluents and emissions management at CEA Centres (Marianne CALVEZ, CEA); 8 - Liquid and gaseous effluents of ITER experimental facility: description and impacts (Pierre CORTES, IO); 9 - Effluents and emissions management strategy at AREVA NC La Hague facility (Stephane PUYDARRIEUX, AREVA); 10 - Radioactive effluents from nuclear facilities ongoing deconstruction: from dimensioning to real effluents (Benoit CLAVEL, EDF); 11 - Radionuclides decontamination process for liquid effluents using micro-algae at the laboratory scale (Corinne RIVASSEAU, CEA); 12 - Radioactive effluents from nuclear medicine services: management, monitoring and impact measurement methods (Nathalie TCHILIAN, ASN); 13 - Evolution history of effluents management and environment monitoring at the Solvay La Rochelle site (Thierry DELLOYE, SOLVAY); 14 - Different international approaches in effluents management and monitoring: example of French and German gaseous effluents - regulation, analyses, accounting rules (Jean-Jacques DIANA, ASN); 15 - Environment

Employee quality, monitoring environment and internal control

Directory of Open Access Journals (Sweden)

Chunli Liu

2017-03-01

Full Text Available We investigate the effect of internal control employees (ICEs on internal control quality. Using special survey data from Chinese listed firms, we find that ICE quality has a significant positive influence on internal control quality. We examine the effect of monitoring on this result and find that the effect is more pronounced for firms with strict monitoring environments, especially when the firms implement the Chinese internal control regulation system (CSOX, have higher institutional ownership or attach greater importance to internal control. Our findings suggest that ICEs play an important role in the design and implementation of internal control systems. Our study should be of interest to both top managers who wish to improve corporate internal control quality and regulators who wish to understand the mechanisms of internal control monitoring.

Peace programme for evaluating the impact of accidents contaminating the environment

Energy Technology Data Exchange (ETDEWEB)

Brechignac, F.; Vallejo, R.; Sauras, T.; Casadesus, J.; Thiry, Y.; Waegeneers, N.; Forsberg, S.; Shaw, G.; Madoz-Escande, C.; Gonze, M.A. [CEA/Fontenay-aux-Roses, Inst. de Protection et de Surete Nucleaire, IPSN, 92 (France)

2000-07-01

The Chernobyl accident, which led to substantial release of radioactive materials in the atmosphere, demonstrated that large environmental areas may be contaminated by fall-out deposition of radioactivity. In particular, contamination by Cs and Sr of agro-ecosystems where food production is taking place is most susceptible to contribute to population radiation dose. Nuclear safety analysis shows that, although very small, the probability of an accident occurring on a pressurized water reactor (PWR) cannot be completely set aside. In such a situation, decision making and management of the contaminated agricultural surfaces largely depend on our ability to predict how, and to which extent, the initial contamination may lead to polluted foodstuffs. Furthermore, the efficiency of the prediction models relies on our level of understanding of the mechanisms governing the transfer of radionuclides in the soil-plant system. Unraveling these mechanisms from in situ observations of environmental areas contaminated by past events is difficult due to the lack of control on both, the contamination itself, which happened in a critical situation, and the natural environment, which is highly variable, temporally and spatially. Such conditions prevent a clear identification of the most relevant parameters influencing the radionuclides transfer and thereby the prediction goal. In particular, current transfer factors introduced in prediction models suffer from unresolved and poorly documented variabilities. This is why IPSN developed a unique research facility capable of generating, in closed and controlled environmental conditions, a mini-accident with release of radioactive aerosols on small-scale, but realistic, samples of crops. These crops are conducted on undisturbed soil monoliths, featuring several soil types from various European countries, managed in lysimeters with advanced water movement control, and placed in greenhouses where three typical climates can be reproduced

Peace programme for evaluating the impact of accidents contaminating the environment

International Nuclear Information System (INIS)

Brechignac, F.; Vallejo, R.; Sauras, T.; Casadesus, J.; Thiry, Y.; Waegeneers, N.; Forsberg, S.; Shaw, G.; Madoz-Escande, C.; Gonze, M.A.

2000-01-01

The Chernobyl accident, which led to substantial release of radioactive materials in the atmosphere, demonstrated that large environmental areas may be contaminated by fall-out deposition of radioactivity. In particular, contamination by Cs and Sr of agro-ecosystems where food production is taking place is most susceptible to contribute to population radiation dose. Nuclear safety analysis shows that, although very small, the probability of an accident occurring on a pressurized water reactor (PWR) cannot be completely set aside. In such a situation, decision making and management of the contaminated agricultural surfaces largely depend on our ability to predict how, and to which extent, the initial contamination may lead to polluted foodstuffs. Furthermore, the efficiency of the prediction models relies on our level of understanding of the mechanisms governing the transfer of radionuclides in the soil-plant system. Unraveling these mechanisms from in situ observations of environmental areas contaminated by past events is difficult due to the lack of control on both, the contamination itself, which happened in a critical situation, and the natural environment, which is highly variable, temporally and spatially. Such conditions prevent a clear identification of the most relevant parameters influencing the radionuclides transfer and thereby the prediction goal. In particular, current transfer factors introduced in prediction models suffer from unresolved and poorly documented variabilities. This is why IPSN developed a unique research facility capable of generating, in closed and controlled environmental conditions, a mini-accident with release of radioactive aerosols on small-scale, but realistic, samples of crops. These crops are conducted on undisturbed soil monoliths, featuring several soil types from various European countries, managed in lysimeters with advanced water movement control, and placed in greenhouses where three typical climates can be reproduced

Exposure assessment of process-related contaminants in food by biomarker monitoring.

Science.gov (United States)

Rietjens, Ivonne M C M; Dussort, P; Günther, Helmut; Hanlon, Paul; Honda, Hiroshi; Mally, Angela; O'Hagan, Sue; Scholz, Gabriele; Seidel, Albrecht; Swenberg, James; Teeguarden, Justin; Eisenbrand, Gerhard

2018-01-01

Exposure assessment is a fundamental part of the risk assessment paradigm, but can often present a number of challenges and uncertainties. This is especially the case for process contaminants formed during the processing, e.g. heating of food, since they are in part highly reactive and/or volatile, thus making exposure assessment by analysing contents in food unreliable. New approaches are therefore required to accurately assess consumer exposure and thus better inform the risk assessment. Such novel approaches may include the use of biomarkers, physiologically based kinetic (PBK) modelling-facilitated reverse dosimetry, and/or duplicate diet studies. This review focuses on the state of the art with respect to the use of biomarkers of exposure for the process contaminants acrylamide, 3-MCPD esters, glycidyl esters, furan and acrolein. From the overview presented, it becomes clear that the field of assessing human exposure to process-related contaminants in food by biomarker monitoring is promising and strongly developing. The current state of the art as well as the existing data gaps and challenges for the future were defined. They include (1) using PBK modelling and duplicate diet studies to establish, preferably in humans, correlations between external exposure and biomarkers; (2) elucidation of the possible endogenous formation of the process-related contaminants and the resulting biomarker levels; (3) the influence of inter-individual variations and how to include that in the biomarker-based exposure predictions; (4) the correction for confounding factors; (5) the value of the different biomarkers in relation to exposure scenario's and risk assessment, and (6) the possibilities of novel methodologies. In spite of these challenges it can be concluded that biomarker-based exposure assessment provides a unique opportunity to more accurately assess consumer exposure to process-related contaminants in food and thus to better inform risk assessment.

Tritium monitoring for nuclear facilities and environment in China

International Nuclear Information System (INIS)

Yang Huaiyuan

1995-12-01

Reviews of achievement and great progress of tritium monitoring techniques for nuclear facility and environment in China over the past 30 years are made which including the development experiences of several important detectors and instruments for health physics monitoring on site and some sampling and measuring methods for environmental monitoring and assessment. Information on nation wide survey activities during 1970∼1980 years on natural environmental radioactivity level in China and the related tritium data are given. (28 refs., 6 tabs.)

Environment and biology of the Kara Sea: a general view for contamination studies.

Science.gov (United States)

Miquel, J C

2001-01-01

The recent revelation that over the past 30 years there has been a history of dumping waste including high-level radioactive wastes in the shallow Kara Sea has caused wide-spread concern. The potential impact of these contaminants and other non-nuclear pollutants in the Arctic ecosystem and on human health need to be assessed and, thus, a better insight gained on radioecological processes in cold waters. The present paper proposes a general view on the biology and the environment of the Kara Sea, as a basic tool for the experimental and modelling assessments of the impact of these contaminants.

Emergency preparedness and internal contamination monitoring

International Nuclear Information System (INIS)

Rahola, T.; Suomela, M.

2000-01-01

After the radiation accidents in Chernobyl, Ukraina in 1986 and in Goiania, Brasil in 1987, much resource have been spent on improving emergency preparedness. Especially regarding transfer of information using the most recent techniques and establishment of 24 hour emergency service of radiation safety experts the development has been fast. The very first measures in a possible emergency situation have been trained nationally and internationally. Less attention has been paid to measures in a somewhat later phase. To be able to react fast enough in an emergency situation it is essential to have well documented plans, written instructions and suitable measurement equipment ready for use. Equally important is that there is trained staff prepared to do measurements without delay. In the first phase of a nuclear accident radioactive iodine is of primary concern regarding internal contamination. After the Chernobyl accident the number of childhood thyroidea cancer clearly exceeded the expected number. Reliable direct measurements of I-131 in the thyroidea in Ukraina, Russia and Belarussia were done only to a limited number of children. Many uncertainties are involved in the data used for dose estimation. Later the body burdens of radiocesium or other radionuclides might be of most importance. Normal whole-body counting instruments can be used if only small groups need to be measured. For large groups of people in an emergency situation faster methods are needed. Different types of monitors installed at places where radiation workers are controlled for internal contamination as well as gamma cameras at hospitals can be used. Rapid field measurements of the whole-body and especially of the thyroid can been done with less sophisticated instruments. In the acute phase of a nuclear accident such measurements should be done without delay. Instruments and staff trained to use them should be available and plans for which groups of people to measure prepared. The detection level

IoT enabled aquatic drone for environment monitoring

OpenAIRE

Matos, João Ricardo Baptista de

2016-01-01

This thesis presents a platform that tackles environment monitoring by using air and water quality sensors to provide data for the user to know what is happening in that surveilled area. The hardware is incorporated in a sensing module in order to be used with an Unmanned Surface Vehicle (USV). It presents a monitoring system based on Raspberry Pi platform and a multichannel sensing module associated with water quality and air quality measurement parameters. Thus, the temper...

Environmental geophysics and geochemistry for contamination mapping and monitoring 1

Energy Technology Data Exchange (ETDEWEB)

Lee, Tai Sup; Lee, Sang Kyu; Hong, Young Kook [Korea Inst. of Geology Mining and Materials, Taejon (Korea, Republic of); and others

1995-12-01

This study aims to provide the technologies which can be practically used for contamination mapping and monitoring. To accomplish this goal, the geophysical and geochemical expertise and techniques commonly used in the mineral resources exploration are employed. In the first year of the three-year-long project, the purpose of the study is to introduce the optimum methodologies among the geophysical and geochemical techniques to tackle the various cases of environmental contamination. To achieve the purpose, case studies of the developed countries were surveyed and analyzed through the various kinds of literatures. The followings are categorized to be solved by geophysical methods: 1) delineation of water system pollution by acid mine drainage and distributions of waste rocks in the closed mine area, 2) defining boundaries of subsurface contamination due to oil seepage, 3) zoning of sea water intrusion in the seashore or subsurface geology highly containing salt, 4) locating of buried metallic wastes such as pipes and drums which can cause the secondary pollution by corrosion, and 5) outlining of the subsurface area polluted by leachate from the landfill. To experiment the above items, various geophysical methods were applied to the corresponding test sites. From these experiments, the applicabilities of the respective geophysical method were analyzed, and the optimum methods were derived for the various pollution types. Furthermore, electric and electromagnetic surveys data processing software were developed to quantitatively interpret and highly resolve the geology. The environmental assignments which can be solved by geochemical methods include: 1) drainage pollution by coal mine effluents, 2)subsurface contamination of oil-spill, 3) sea water intrusion, 4) dispersion of toxic heavy metallic elements in the metal mines, and 5) radon environmental geochemistry. The appropriate test sites for applying the geochemical methods were selected. (Abstract Truncated)

Third report on the Oak Ridge National Laboratory Biological Monitoring and Abatement Program for White Oak Creek Watershed and the Clinch River

Energy Technology Data Exchange (ETDEWEB)

Loar, J.M. [ed.; Adams, S.M.; Bailey, R.D. [and others

1994-03-01

As a condition of the National Pollutant Discharge Elimination System (NPDES) permit issued to Oak Ridge National Laboratory (ORNL) on April 1, 1985, a Biological Monitoring and Abatement Program (BMAP) was developed for White Oak Creek (WOC); selected tributaries of WOC, including Fifth Creek, First Creek, Melton Branch, and Northwest Tributary; and the Clinch River. The BMAP currently consists of six major tasks that address both radiological and nonradiological contaminants in the aquatic and terrestrial environs at ORNL. These are (1) toxicity monitoring, (2) bioaccumulation monitoring of nonradiological contaminants in aquatic biota, (3) biological indicator studies, (4) instream ecological monitoring, (5) assessment of contaminants in the terrestrial environment, and (6) radioecology of WOC and White Oak Lake (WOL). The investigation of contaminant transport, distribution, and fate in the WOC embayment-Clinch River-Watts Bar Reservoir system was originally a task of the BMAP but, in 1988, was incorporated into the Resource Conservation and Recovery Act Facility Investigation for the Clinch River, a separate study to assess offsite contamination from all three Department of Energy facilities in Oak Ridge.

Third report on the Oak Ridge National Laboratory Biological Monitoring and Abatement Program for White Oak Creek Watershed and the Clinch River

International Nuclear Information System (INIS)

Loar, J.M.; Adams, S.M.; Bailey, R.D.

1994-03-01

As a condition of the National Pollutant Discharge Elimination System (NPDES) permit issued to Oak Ridge National Laboratory (ORNL) on April 1, 1985, a Biological Monitoring and Abatement Program (BMAP) was developed for White Oak Creek (WOC); selected tributaries of WOC, including Fifth Creek, First Creek, Melton Branch, and Northwest Tributary; and the Clinch River. The BMAP currently consists of six major tasks that address both radiological and nonradiological contaminants in the aquatic and terrestrial environs at ORNL. These are (1) toxicity monitoring, (2) bioaccumulation monitoring of nonradiological contaminants in aquatic biota, (3) biological indicator studies, (4) instream ecological monitoring, (5) assessment of contaminants in the terrestrial environment, and (6) radioecology of WOC and White Oak Lake (WOL). The investigation of contaminant transport, distribution, and fate in the WOC embayment-Clinch River-Watts Bar Reservoir system was originally a task of the BMAP but, in 1988, was incorporated into the Resource Conservation and Recovery Act Facility Investigation for the Clinch River, a separate study to assess offsite contamination from all three Department of Energy facilities in Oak Ridge

Network monitoring module of BES III system environment

International Nuclear Information System (INIS)

Song Liwen; Zhao Jingwei; Zhang Bingyun

2002-01-01

In order to meet the needs of the complicated network architecture of BES III (Beijing Spectrometer III) and make sure normal online running in the future, it is necessary to develop a multi-platforms Network Monitoring Tool which can help system administrator monitor and manage BES III network. The author provides a module that can monitor not only the traffic of switch-router's ports but also the performance status of key devices in the network environment, meanwhile it can also give warning to manager and submit the related reports. the great sense, the theory basis, the implementing method and the graph in formation of this tool will be discussed

Medical Significance of Microorganisms in Spacecraft Environment

Science.gov (United States)

Pierson, Duane L.; Ott, C. Mark

2007-01-01

Microorganisms can spoil food supplies, contaminate drinking water, release noxious volatile compounds, initiate allergic responses, contaminate the environment, and cause infectious diseases. International acceptability limits have been established for bacterial and fungal contaminants in air and on surfaces, and environmental monitoring is conducted to ensure compliance. Allowable levels of microorganism in water and food have also been established. Environmental monitoring of the space shuttle, the Mir, and the ISS have allowed for some general conclusions. Generally, the bacteria found in air and on interior surfaces are largely of human origin such as Staphylococcus spp., Micrococcus spp. Common environmental genera such as Bacillus spp. are the most commonly isolated bacteria from all spacecraft. Yeast species associated with humans such as Candida spp. are commonly found. Aspergillus spp., Penicillium spp., and Cladosporium spp. are the most commonly isolated filamentous fungi. Microbial levels in the environment differ significantly depending upon humidity levels, condensate accumulation, and availability of carbon sources. However, human "normal flora" of bacteria and fungi can result in serious, life-threatening diseases if human immunity is compromised. Disease incidence is expected to increase as mission duration increases.

Annual Reporting of Monitoring at Morrill, Kansas in 2015

Energy Technology Data Exchange (ETDEWEB)

LaFreniere, Lorraine M. [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-06-01

In September 2005, the CCC/USDA initiated periodic sampling of groundwater, in accord with a program (Argonne 2005b) approved by the KDHE (2005), to monitor carbon tetrachloride concentrations in the groundwater. Under the KDHE-approved monitoring plan (Argonne 2005b), groundwater was sampled twice yearly for VOCs analyses through 2011. During the initial two years of monitoring, analysis for selected geochemical parameters was also conducted to aid in the evaluation of possible natural contaminant degradation (reductive dechlorination) processes in the subsurface environment. Consistently low levels of dissolved oxygen (DO) and oxidation-reduction potential (ORP) at monitoring well MW1D (in the deepest portion of the contaminated aquifer) and the presence of chloroform (the primary degradation product of carbon tetrachloride) suggested that some degree of reductive dechlorination was occurring.

Results of monitoring at Olkiluoto in 2012. Environment

International Nuclear Information System (INIS)

Haapanen, A.

2014-04-01

In 2003, Posiva Oy presented a programme for monitoring at Olkiluoto during construction and operation of ONKALO. In 2012 the monitoring programme was updated to concern the years 2012-2018. Part of the monitoring is performed by the company running the nuclear power plants on the island, Teollisuuden Voima Oy (TVO). This Working Report presents the main results of Posiva's environmental monitoring programme on Olkiluoto Island in 2012. Results are presented under five topics: 1. Evolution of geosphere, 2. Biosphere modelling input data, 3. Interaction between surface environment and groundwater in bedrock, 4. Environmental impact and 5. Baseline of monitoring of radioactive releases. Concerning the evolution of geosphere, LIDAR-scannings were done in the Olkiluoto area in 2012. The acquired data can be used for elevation and other modelling purposes. The soil solution quality in 2012 was quite comparable to that in earlier years. Proximity of the sea and the young age of soils are seen in soil solution results. Biosphere modelling input data in 2012 included e.g. continuous tree litterfall and transpiration data, as well as updated game statistics and population estimates of fauna, a fishery survey from the River Eurajoki (2011) and basic monitoring data from Olkiluoto offshore properties. Interaction between surface environment and groundwater in bedrock includes e.g. weather and surface water monitoring data. Environmental impact analyses included e.g. monitoring of noise, air quality, effluent waters and private drilled wells. Noise monitoring in the vicinity of ONKALO showed that in the case of raised noise levels the sources are mainly the traffic on Olkiluodontie road, the air conditioning of ONKALO and occasional sources such as springtime bird sounds. Construction activities in the area were seen in increased amount of NO 3 -N in the bulk deposition, and Al and Fe accumulating on needle surfaces in areas close to the rock piling and crushing area. Scots

Results of monitoring at Olkiluoto in 2012. Environment

Energy Technology Data Exchange (ETDEWEB)

Haapanen, A. (ed.) [Haapanen Forest Consulting, Vanhakylae (Finland)

2014-04-15

In 2003, Posiva Oy presented a programme for monitoring at Olkiluoto during construction and operation of ONKALO. In 2012 the monitoring programme was updated to concern the years 2012-2018. Part of the monitoring is performed by the company running the nuclear power plants on the island, Teollisuuden Voima Oy (TVO). This Working Report presents the main results of Posiva's environmental monitoring programme on Olkiluoto Island in 2012. Results are presented under five topics: 1. Evolution of geosphere, 2. Biosphere modelling input data, 3. Interaction between surface environment and groundwater in bedrock, 4. Environmental impact and 5. Baseline of monitoring of radioactive releases. Concerning the evolution of geosphere, LIDAR-scannings were done in the Olkiluoto area in 2012. The acquired data can be used for elevation and other modelling purposes. The soil solution quality in 2012 was quite comparable to that in earlier years. Proximity of the sea and the young age of soils are seen in soil solution results. Biosphere modelling input data in 2012 included e.g. continuous tree litterfall and transpiration data, as well as updated game statistics and population estimates of fauna, a fishery survey from the River Eurajoki (2011) and basic monitoring data from Olkiluoto offshore properties. Interaction between surface environment and groundwater in bedrock includes e.g. weather and surface water monitoring data. Environmental impact analyses included e.g. monitoring of noise, air quality, effluent waters and private drilled wells. Noise monitoring in the vicinity of ONKALO showed that in the case of raised noise levels the sources are mainly the traffic on Olkiluodontie road, the air conditioning of ONKALO and occasional sources such as springtime bird sounds. Construction activities in the area were seen in increased amount of NO{sub 3}-N in the bulk deposition, and Al and Fe accumulating on needle surfaces in areas close to the rock piling and crushing area

Long-term ERT monitoring of biogeochemical changes of an aged hydrocarbon contamination

Science.gov (United States)

Caterina, David; Flores Orozco, Adrian; Nguyen, Frédéric

2017-06-01

Adequate management of contaminated sites requires information with improved spatio-temporal resolution, in particular to assess bio-geochemical processes, such as the transformation and degradation of contaminants, precipitation of minerals or changes in groundwater geochemistry occurring during and after remediation procedures. Electrical Resistivity Tomography (ERT), a geophysical method sensitive to pore-fluid and pore-geometry properties, permits to gain quasi-continuous information about subsurface properties in real-time and has been consequently widely used for the characterization of hydrocarbon-impacted sediments. However, its application for the long-term monitoring of processes accompanying natural or engineered bioremediation is still difficult due to the poor understanding of the role that biogeochemical processes play in the electrical signatures. For in-situ studies, the task is further complicated by the variable signal-to-noise ratio and the variations of environmental parameters leading to resolution changes in the electrical images. In this work, we present ERT imaging results for data collected over a period of two years on a site affected by a diesel fuel contamination and undergoing bioremediation. We report low electrical resistivity anomalies in areas associated to the highest contaminant concentrations likely due transformations of the contaminant due to microbial activity and accompanying release of metabolic products. We also report large seasonal variations of the bulk electrical resistivity in the contaminated areas in correlation with temperature and groundwater level fluctuations. However, the amplitude of bulk electrical resistivity variations largely exceeds the amplitude expected given existing petrophysical models. Our results suggest that the variations in electrical properties are mainly controlled by microbial activity which in turn depends on soil temperature and hydrogeological conditions. Therefore, ERT can be suggested as

Results of monitoring at Olkiluoto in 2005. Environment

International Nuclear Information System (INIS)

Haapanen, R.

2006-08-01

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2005. This is the second annual report. Monitoring has been carried out for varying time periods depending on the sector: some monitoring activities performed by TVO originate from the 1970s, others connected with the construction of the final disposal repository for nuclear waste and the underground research facility ONKALO have just started. The system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for environmental impact analyses. In 2005 the deposition collectors and nearby needles caught some dust from the rock piling and crushing activities and traffic. Noise was another clear effect, originating mostly from OL3 construction, rock piling and crushing area and the concrete station. The studies further confirmed that the vegetation, forests, soils and animal life are typical of a coastal region within the same vegetation zone. The nearby marine environment is affected by the cooling water from the nuclear power plant, to varying extents depending on the organism and the distance. Monitoring of marine environments as well as radionuclide analyses at the moment produce reference data for the future and create a basis for the construction of a model, as no input from Posiva's activities will influence these areas for a long time. (orig.)

Space Environment Effects on Materials at Different Positions and Operational Periods of ISS

Science.gov (United States)

Kimoto, Yugo; Ichikawa, Shoichi; Miyazaki, Eiji; Matsumoto, Koji; Ishizawa, Junichiro; Shimamura, Hiroyuki; Yamanaka, Riyo; Suzuki, Mineo

2009-01-01

A space materials exposure experiment was condcuted on the exterior of the Russian Service Module (SM) of the International Space Station (ISS) using the Micro-Particles Capturer and Space Environment Exposure Device (MPAC&SEED) of the Japan Aerospace Exploration Agency (JAXA). Results reveal artificial environment effects such as sample contamination, attitude change effects on AO fluence, and shading effects of UV on ISS. The sample contamination was coming from ISS components. The particles attributed to micrometeoroids and/or debris captured by MPAC might originate from the ISS solar array. Another MPAC&SEED will be aboard the Exposure Facility of the Japanese Experiment Module, KIBO Exposure Facility (EF) on ISS. The JEM/MPAC&SEED is attached to the Space Environment Data Acquisition Equipment-Attached Payload (SEDA-AP) and is exposed to space. Actually, SEDA-AP is a payload on EF to be launched by Space Shuttle flight 2J/A. In fact, SEDA-AP has space environment monitors such as a high-energy particle monitor, atomic oxygen monitor, and plasma monitor to measure in-situ natural space environment data during JEM/MPAC&SEED exposure. Some exposure samples for JEM/MPAC&SEED are identical to SM/MPAC&SEED samples. Consequently, effects on identical materials at different positions and operation periods of ISS will be evaluated. This report summarizes results from space environment monitoring samples for atomic oxygen analysis on SM/MPAC&SEED, along with experimental plans for JEM/MPAC&SEED.

Contaminants in the Greenland terrestrial and freshwater environment. National assessment

International Nuclear Information System (INIS)

Riget, F.; Aastrup, P.; Dietz, R.

1997-01-01

The present report reviews the available information on heavy metals, persistent organic pollutants and radioactivity in the Greenland freshwater and terrestrial environments. Levels in lake sediments, soil, humus and organisms are presented, spatial and temporal trends are discussed and where possible also biological effects. Many of the contaminants that occur in the Greenland environment originate from distant sources outside of the region, and are transported to the Arctic via three major pathways - atmospheric, terrestrial/freshwater and marine. The main sources of pollution in Greenland is considered to be the industrialization of Eurasia. Pollutants are mainly. The organochlorine levels in Greenland char are typically in the low range compared to values reported from Canada. The Greenland sediment samples showed all organochlorine values below the detection limits of 0.1 μg/kg dry weight, thus being among the lowest contaminated sediments within the Arctic. The total content of PAH in the Greenland sediment samples ranged between 78-635 μ3 g/kg dry wight, with a geometric mean of 178 μg/kg, comparable to or lower than reported values from other arctic countries. The lowest concentrations of anthropogenic radionuclides in the Greenland terrestrial and freshwater environment are found in the northern parts of Greenland and the highest in the south western parts. The main source of anthropogenic radioactivity is nuclear weapons testing in the atmosphere and the fallout from this activity is closely related to the amounts of precipitation. The predominant foodchain in the Arctic with regard to transport of radiocaesium to man is: Lichen-reindeer-man. Although the doses from the terrestrial foodchain are 20 times higher than those received from the marine foodchain, they are not considered to be of any relevance for the human health in Greenland. 4 appendices contain experimental results. (EG)

Radioactive monitoring of the marine environment

International Nuclear Information System (INIS)

Bologa, A. S.

1991-01-01

Radioactivity monitoring of marine environment was required by the development of nuclear power and the worldwide use of ionizing radiations in many different activities. Both natural and artificial radioactivity play an important role in marine ecology and human health. In respect of this, three major facts prevail, namely: the fallout, the proximity of Danube River and the future nuclear power production. Spatial and temporal monitoring of marine radioactivity along the Romanian Black Sea shore has been systematically performed in Romanian Marine Research Institute in close cooperation with Institute of Meteorology and Hydrology since 1981. Marine emerged and submerged sediments, coastal and offshore sea water, macroalgae, invertebrates and fish of Danube mouths and/or along the coast are monitored for natural and artificial radioactivity by means of gross beta measurements and gamma spectrometry. Concentrations of radionuclides such as: K-40, Cs-134 and Cs-137 in abiotic and biotic samples, environmental distribution coefficients and concentration factors (CFs) as well as experimentally derived CFs in marine biota as radioecological bioindicators are assessed and stored in a national data base. (author)

The Integrated Design for Micro - environment Monitoring System of Showcase in Museum

Directory of Open Access Journals (Sweden)

Dong Chan

2017-01-01

Full Text Available In order to improve the current environment quality of cultural relics in museum and make them preserved for a long time, the paper proposes the integrated design for micro - environment monitoring system of showcase in museum, the system mainly monitors the micro-environment of heritage, such as ultraviolet, light, formaldehyde, CO2, TVOC, PM 2.5, choosing cotex-M3 ARM microcontroller STM32F103ZET6 as the control core. Based on the concept of integration, the system integrates the single air monitoring instruments. The design of circuit mainly includes the process of digital power supply and analog power supply, the acquisition and processing of 5 analog signals from sensors, and the design of reserved interface. In the aspect of interaction, the serial port lcd module was uesd for the display and control, which can get rid of the control of PC and achieve the functions of environmental monitoring, environmental warning, environmental assessment, historical data query. The integrated design for Micro-environment of Showcase in Museum achieves a monitoring platform successfully which is easy for users’ operation and access to display information conveniently. The advantages of the system are strong portability, low cost and short development cycle.

Building of effluence and environment monitoring capability of uranium mining and metallurgy in China

International Nuclear Information System (INIS)

Li Xianjie; Hu Penghua; Duan Jianchen; Xue Jianxin

2014-01-01

The status of effluence and environmental monitoring capability of nine uranium mining and metallurgy corporations in operation in China was investigated and analyzed. The results show that there exist some problems in all corporations such as imperfect monitoring plan, ineligible analyst, aging equipment, insufficient analysis capacity, lack of good detection limit. In order to solve the problems, several steps have been taken by Department of Safety and Environment Protection and Department of Geology and Mining (CNNC) in three years, including establishing three-level monitoring sys- tem, equipping corresponding monitoring instrument, holding three training classes, enhancing the analyst capacity, publishing the model for effluence and environment monitoring capability of uranium mining and metallurgy and carrying out comparison on monitoring of U and Ra in water, which greatly improved effluence and environment monitoring capability of uranium mining and metallurgy. (authors)

Mercury and Cyanide Contaminations in Gold Mine Environment and Possible Solution of Cleaning Up by Using Phytoextraction

Directory of Open Access Journals (Sweden)

NURIL HIDAYATI

2009-09-01

Full Text Available Water contamination with heavy metals, mainly mercury and cyanide (CN due to small scale of public mines and large scale of industrial mines have been in concern to residents around the area. Surveys of heavy metal contamination in aquatic environments, such as rivers and paddy fields over two gold mine areas in West Jawa were conducted and possible solution of using indigenous plants for phytoremediation was studied. The results showed that most of the rivers and other aquatic environments were affected by gold mine activities. Rivers, ponds, and paddy fields around illegal public mines were mostly contaminated by mercury in considerably high levels, such as paddy fields in two locations (Nunggul and Leuwijamang, Pongkor were contaminated up to 22.68 and 7.73 ppm of Hg, respectively. Whereas rivers located around large scale industrial mines were contaminated by CN. Possible solution of cleaning up by using green technology of phytoremediation was examined. Some plant species grew in the contaminated sites showed high tolerance and potentially effective in accumulating cyanide or mercury in their roots and above ground portions. Lindernia crustacea (L. F.M., Digitaria radicosa (Presl Miq, Paspalum conjugatum, Cyperus kyllingia accumulated 89.13, 50.93, 1.78, and 0.77 ppm of Hg, respectively. Whereas, Paspalum conjugatum, Cyperus kyllingia accumulated 16.52 and 33. 16 ppm of CN respectively.

Contamination of the Gulf marine environment following the war

International Nuclear Information System (INIS)

Readman, J.W.; Fowler, S.W.; Villeneuve, J.-P.; Cattini, C.; Oregioni, B.; Mee, L.D.

1992-01-01

Following the Gulf war, controversy and speculation have surrounded the extent to which the massive spillage of petroleum and the burning of oil wells in Kuwait have damaged marine ecosystems in the region. We report here the results of a rapid assessment survey of hydrocarbon contamination undertaken in the coastal marine environment from Kuwait to Oman during mid-1991. Our results show that severe oil pollution was restricted primarily to the Saudi Arabian coastline within ∼ 400km from the spillages, and that during the four months following the conflict and preceding our survey, the spilled oil had extensively degraded. Surprisingly, concentrations of petroleum hydrocarbons in sediments and bivalve molluscs from Bahrain in June 1991 were lower than those recorded from our pre-war (1983-86) surveys at the same site, probably as a result of decreased tanker traffic and associated deballasting during and after the conflict. As for carcinogenic polycyclic aromatic hydrocarbons produced during burning of the oil wells, we found that concentrations in sediments from even the most heavily contaminated sites were relatively low, and comparable to levels reported for the Baltic Sea, coastal locations of the northeastern United States and United Kingdom estuaries. (author)

Combining Geoelectrical Measurements and CO2 Analyses to Monitor the Enhanced Bioremediation of Hydrocarbon-Contaminated Soils: A Field Implementation

Directory of Open Access Journals (Sweden)

Cécile Noel

2016-01-01

Full Text Available Hydrocarbon-contaminated aquifers can be successfully remediated through enhanced biodegradation. However, in situ monitoring of the treatment by piezometers is expensive and invasive and might be insufficient as the information provided is restricted to vertical profiles at discrete locations. An alternative method was tested in order to improve the robustness of the monitoring. Geophysical methods, electrical resistivity (ER and induced polarization (IP, were combined with gas analyses, CO2 concentration, and its carbon isotopic ratio, to develop a less invasive methodology for monitoring enhanced biodegradation of hydrocarbons. The field implementation of this monitoring methodology, which lasted from February 2014 until June 2015, was carried out at a BTEX-polluted site under aerobic biotreatment. Geophysical monitoring shows a more conductive and chargeable area which corresponds to the contaminated zone. In this area, high CO2 emissions have been measured with an isotopic signature demonstrating that the main source of CO2 on this site is the biodegradation of hydrocarbon fuels. Besides, the evolution of geochemical and geophysical data over a year seems to show the seasonal variation of bacterial activity. Combining geophysics with gas analyses is thus promising to provide a new methodology for in situ monitoring.

Comparison of surface contamination monitors for in vivo measurement of 131I in thyroid

International Nuclear Information System (INIS)

Oliveira, S.M.; Dantas, A.L.A.; Dantas, B.M.

2015-01-01

The routine handling of radiopharmaceuticals in nuclear medicine represents a significant risk of internal exposure to the staff. The IAEA recommends the implementation of monitoring plans for all workers subject to a risk of exposures above 1 mSv per year. However, in Brazil, such recommendation is practically unfeasible due to the lack of a sufficient number of qualified internal dosimetry services over the country. This work presents an alternative based on a simple and inexpensive methodology aimed to perform in-vivo monitoring of 131 I in thyroid using portable surface contamination probes. All models evaluated showed suitable sensitivity for such application. (author)

Recent developments for field monitoring of alpha-emitting contaminants in the environment

International Nuclear Information System (INIS)

Ahlquist, A.J.; Umbarger, C.J.; Stoker, A.K.

1978-01-01

The Los Alamos Scientific Laboratory has adapted two field methods to assess rapidly locations and concentrations of alpha-emitting contaminants in soil. (1) A ZnS scintillator is used for gross-alpha measurements on soil samples. Sample preparation and the calibration and detection limits of the system are discussed, and results of gross-alpha analysis are compared with results of a 239 Pu radiochemistry analysis. (2) A Phoswich detector is used as a field survey instrument because it can detect lower levels of radioactivity than the FIDLER probe. The electronics are carried in a truck and the probe is connected by an umbilical cord. The system electronics are calibrated with an energy window of 12-40 keV which allows detection of Pu, Am, Th (using daughter L X-rays of the alpha-emitters) and 137 Cs (using its daughter 32 keV X-rays). The bremsstrahlung from 90 Sr can also be detected. (author)

Contamination of butyltin compounds in Malaysian marine environments

International Nuclear Information System (INIS)

Sudaryanto, Agus; Takahashi, Shin; Iwata, Hisato; Tanabe, Shinsuke; Ismail, Ahmad

2004-01-01

Concentration of butyltin compounds (BTs), including tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) and total tin (ΣSn) were determined in green mussel (Perna viridis), 10 species of muscle fish and sediment from coastal waters of Malaysia. BTs were detected in all these samples ranging from 3.6 to 900 ng/g wet wt., 3.6 to 210 ng/g wet wt., and 18 to 1400 ng/g dry wt. for mussels, fish and sediments, respectively. The concentrations of BTs in several locations of this study were comparable with the reported values from some developed countries and highest among Asian developing nations. Considerable concentration of BTs in several locations might have ecotoxicological consequences and may cause concern to human health. The parent compound TBT was found to be highest than those of its degradation compounds, DBT and MBT, suggesting recent input of TBT to the Malaysian marine environment. Significant positive correlation (Spearman rank correlation: r 2 =0.82, P<0.0001) was found between BTs and ΣSn, implying considerable anthropogenic input of butyltin compounds to total tin contamination levels. Enormous boating activities may be a major source of BTs in this country, although aquaculture activities may not be ignored. - Lack of any regulation of TBT clearly resulted in a heavy contamination of BTs in Malaysia

Contamination of butyltin compounds in Malaysian marine environments

Energy Technology Data Exchange (ETDEWEB)

Sudaryanto, Agus; Takahashi, Shin; Iwata, Hisato; Tanabe, Shinsuke; Ismail, Ahmad

2004-08-01

Concentration of butyltin compounds (BTs), including tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) and total tin ({sigma}Sn) were determined in green mussel (Perna viridis), 10 species of muscle fish and sediment from coastal waters of Malaysia. BTs were detected in all these samples ranging from 3.6 to 900 ng/g wet wt., 3.6 to 210 ng/g wet wt., and 18 to 1400 ng/g dry wt. for mussels, fish and sediments, respectively. The concentrations of BTs in several locations of this study were comparable with the reported values from some developed countries and highest among Asian developing nations. Considerable concentration of BTs in several locations might have ecotoxicological consequences and may cause concern to human health. The parent compound TBT was found to be highest than those of its degradation compounds, DBT and MBT, suggesting recent input of TBT to the Malaysian marine environment. Significant positive correlation (Spearman rank correlation: r{sup 2}=0.82, P<0.0001) was found between BTs and {sigma}Sn, implying considerable anthropogenic input of butyltin compounds to total tin contamination levels. Enormous boating activities may be a major source of BTs in this country, although aquaculture activities may not be ignored. - Lack of any regulation of TBT clearly resulted in a heavy contamination of BTs in Malaysia.

Ambient air monitoring for mercury around an industrial complex

International Nuclear Information System (INIS)

Turner, R.R.; Bogle, M.A.

1991-01-01

Public and scientific interest in mercury in the environment has experienced an upsurge in the past few years, due in part to disclosures that fish in certain waters, which have apparently received no direct industrial discharges, were contaminated with mercury. Atmospheric releases of mercury from fossil fuel energy generators, waste incinerators and other industrial sources are suspected to be contributing to this problem. Such releases can be evaluated in a variety of ways, including stack sampling, material balance studies, soil/vegetation sampling and ambient air monitoring. Ambient air monitoring of mercury presents significant challenges because of the typically low concentrations (ng/m 3 ) encountered and numerous opportunities for sample contamination or analyte loss. There are presently no EPA-approved protocols for such sampling and analysis. Elemental mercury was used in large quantities at a nuclear weapons plant in Oak Ridge, Tennessee between 1950 and 1963 in a process similar to chloralkali production. Soil and water contamination with mercury were known to be present at the facility but outdoor ambient air contamination had not been investigated prior to the present study. In addition, one large building still contained original process equipment with mercury residuals. The objectives of this study were to establish a monitoring network for mercury which could be used (1) to demonstrate whether or not human health and the environment was being protected, and (2), to establish a decommissioning activities at the facility

Radiation monitoring network of the Czech Republic

International Nuclear Information System (INIS)

Kuca, P.; Novak, L.; Rulik, P.; Tecl, J.

2003-01-01

The Radiation Monitoring Network (RMN) of the Czech Republic was established after the Chernobyl accident in 1986 and it is developed all the time. It is co-ordinated by the State Office for Nuclear Safety in co-operation with the National Radiation Protection Institute. Czech RMN consists of the several sub-networks, which include selected or all permanent parts of RMN. The sub-networks are following: the Early Warning Network (EWN), the TLD Territorial Network, the Network of the Measuring Sites of Air Contamination, the Network of Laboratories Equipped with Gamma-spectrometric and Radiochemical Analytical Instrumentation, the Ground and Airborne Mobile Groups. The Laboratory of Monitoring of Internal Contamination and the information system (IS) are a significant part of RMN, too. The data of RMN resulting from monitoring are transferred to the central database of CRMN, processed by the information system (IS). They are used in normal and emergency situations for an evaluation of radiation situation and for preparation of recommendations for protection of the public and the environment. In 2002 any extraordinary radioactivity in the environment was not detected and also none of the measuring points recorded any exceeding of established investigation levels. In components of environment and also in human beings a very low activity of 137 Cs was still measurable, that had been released into environment after the Chernobyl accident and by the nuclear weapon tests in sixties of the last century. (authors)

Natural Contamination and Surface Flashover on Silicone Rubber Surface under Haze–Fog Environment

Directory of Open Access Journals (Sweden)

Ang Ren

2017-10-01

Full Text Available Anti-pollution flashover of insulator is important for power systems. In recent years, haze-fog weather occurs frequently, which makes discharge occurs easily on the insulator surface and accelerates insulation aging of insulator. In order to study the influence of haze-fog on the surface discharge of room temperature vulcanized silicone rubber, an artificial haze-fog lab was established. Based on four consecutive years of insulator contamination accumulation and atmospheric sampling in haze-fog environment, the contamination configuration appropriate for RTV-coated surface discharge test under simulation environment of haze-fog was put forward. ANSYS Maxwell was used to analyze the influence of room temperature vulcanized silicone rubber surface attachments on electric field distribution. The changes of droplet on the polluted room temperature vulcanized silicone rubber surface and the corresponding surface flashover voltage under alternating current (AC, direct current (DC positive polar (+, and DC negative polar (− power source were recorded by a high speed camera. The results are as follows: The main ion components from haze-fog atmospheric particles are NO3−, SO42−, NH4+, and Ca2+. In haze-fog environment, both the equivalent salt deposit density (ESDD and non-soluble deposit density (NSDD of insulators are higher than that under general environment. The amount of large particles on the AC transmission line is greater than that of the DC transmission line. The influence of DC polarity power source on the distribution of contamination particle size is not significant. After the deposition of haze-fog, the local conductivity of the room temperature vulcanized silicone rubber surface increased, which caused the flashover voltage reduce. Discharge is liable to occur at the triple junction point of droplet, air, and room temperature vulcanized silicone rubber surface. After the deformation or movement of droplets, a new triple junction

Feasibility study on application of bio-accumulation radionuclides as a countermeasure to restoration of contaminated environments

Energy Technology Data Exchange (ETDEWEB)

Watabe, Teruhisa; Hirano, Shigeki; Nakamura, Ryoichi [National Inst. of Radiological Sciences, Hitachinaka, Ibaraki (Japan). Lab. for Radioecology] [and others

2001-12-01

Phenomena of bio-accumulation of radionuclides was reviewed in order to know whether or not it was useful and effective to apply as a countermeasure to restoration of contaminated area, and to examine the extent of removal of radioactive contaminants from the environment. Special attention was directed to the technique, ''phytoremediation'' in which plants that hyperaccumulated heavy metals were cultivated on the contaminated lands for removing them. Plant species recognized as ''hyperaccumulator'' were searched in the literature and listed for providing a botanical and taxonomical prospect. On the other hand, a screening analysis was carried out for determining the elemental concentrations in sea weeds in order to find species with a high affinity for the specific elements. Of 30 species of sea weeds, the highest concentration of iron, iodine, strontium, and uranium was observed in Ulva sp., Laminaria sp., Corallina sp. and Undaria sp., respectively, although there were no species having the elemental concentration 100 times higher than those for so called ''reference plant''. Brown algae generally showed relatively higher concentrations for almost all elements of interest. It could be concluded that brown algae might be effective to use for phytoremediation because of their high affinity for many elements along with their high biomass in a possible case of radioactive contamination in the marine environment. Phytoremediation would be more advantageous not only from an economical viewpoint, but from the viewpoint of preservation of the environments than other possible remedial procedures, such as acid leaching of contaminants, excavation and storage of the soil, physical separation of the pollutants, and so on. This technique has been put into practical use and would gain much more support of the public in the future, however it needs more detailed information to establish as a sound and reliable

Feasibility study on application of bio-accumulation radionuclides as a countermeasure to restoration of contaminated environments

International Nuclear Information System (INIS)

Watabe, Teruhisa; Hirano, Shigeki; Nakamura, Ryoichi

2001-01-01

Phenomena of bio-accumulation of radionuclides was reviewed in order to know whether or not it was useful and effective to apply as a countermeasure to restoration of contaminated area, and to examine the extent of removal of radioactive contaminants from the environment. Special attention was directed to the technique, ''phytoremediation'' in which plants that hyperaccumulated heavy metals were cultivated on the contaminated lands for removing them. Plant species recognized as ''hyperaccumulator'' were searched in the literature and listed for providing a botanical and taxonomical prospect. On the other hand, a screening analysis was carried out for determining the elemental concentrations in sea weeds in order to find species with a high affinity for the specific elements. Of 30 species of sea weeds, the highest concentration of iron, iodine, strontium, and uranium was observed in Ulva sp., Laminaria sp., Corallina sp. and Undaria sp., respectively, although there were no species having the elemental concentration 100 times higher than those for so called ''reference plant''. Brown algae generally showed relatively higher concentrations for almost all elements of interest. It could be concluded that brown algae might be effective to use for phytoremediation because of their high affinity for many elements along with their high biomass in a possible case of radioactive contamination in the marine environment. Phytoremediation would be more advantageous not only from an economical viewpoint, but from the viewpoint of preservation of the environments than other possible remedial procedures, such as acid leaching of contaminants, excavation and storage of the soil, physical separation of the pollutants, and so on. This technique has been put into practical use and would gain much more support of the public in the future, however it needs more detailed information to establish as a sound and reliable methodology. (author)

Alpha-in-air monitor for continuous monitoring based on alpha to beta ratio

International Nuclear Information System (INIS)

Somayaji, K.S.; Venkataramani, R.; Swaminathan, N.; Pushparaja

1997-01-01

Measurement of long-lived alpha activity collected on a filter paper in continuous air monitoring of ambient working environment is difficult due to interference from much larger concentrations of short-lived alpha emitting daughter products of 222 Rn and 220 Rn. However, the ratio between the natural alpha and beta activity is approximately constant and this constancy of the ratio is used to discriminate against short-lived natural radioactivity in continuous air monitoring. Detection system was specially designed for the purpose of simultaneous counting of alpha and beta activity deposited on the filter paper during continuous monitoring. The activity ratios were calculated and plotted against the monitoring duration up to about six hours. Monitoring was carried out in three facilities with different ventilation conditions. Presence of any long-lived alpha contamination on the filter paper results in increase in the alpha to beta ratio. Long-lived 239 Pu contamination of about 16 DAC.h could be detected after about 45 minutes of commencement of the sampling. The experimental results using prototype units have shown that the approach of using alpha to beta activity ratio method to detect long-lived alpha activity in the presence of short-lived natural activity is satisfactory. (author)

Real time nanogravimetric monitoring of corrosion in radioactive environments

OpenAIRE

Tzagkaroulakis, Ioannis; Boxall, Colin

2017-01-01

Monitoring and understanding the mechanism of metal corrosion throughout the nuclear fuel cycle play a key role in the safe asset management of facilities. They also provide information essential for making an informed choice regarding the selection of decontamination methods for steel plant and equipment scheduled for decommissioning. Recent advances in Quartz Crystal Nanobalance (QCN) technology offer the means of monitoring corrosion in-situ, in radiologically harsh environments, in real t...

The Hamburg polonium-210 case. Monitoring of internal contaminations in a malevolent act

International Nuclear Information System (INIS)

Dalheimer, A.; Koenig, K.; Nosske, D.; Schaefer, I.

2009-01-01

The dead of Alexander Litvinenko in London in the late 2006 was linked with the visit of Dimitri Kovtun. So an investigation was started by the Hamburg Police. As the presence of polonium-210 was uncertain, the action was supported by the Federal Defense against Nuclear Hazards (NGA) of the Federal Office for Radiation Protection (BfS). Radiation measurements in some flats in Hamburg confirmed the suspicion of polonium-210 contaminations. As incorporations by ingestion or inhalation could not generally be excluded, the Coordinating Office on Incorporation Monitoring of the BfS (Leitstelle Inkorporationsueberwachung des BfS) was requested to clarify this issue. The BfS office then coordinated the required bioassay analyses of urine samples carried out at four officially appointed in-vitro laboratories for incorporation monitoring. The group of people to be examined included the members of the family involved living in the contaminated flats, the emergency forces, as well as potentially exposed members of the public. The calculation of the internal dose was based on standard assumptions and also conducted by the BfS. The internal radiation doses proved to be within the range of radiation doses due to natural exposures. Retrospectively it should be stressed that the collaboration and cooperation of all institutions involved in the operation in Hamburg was extremely good despite their differing organisational structures. As a result of the incident in Hamburg various middle and long-term measures have been taken since then by the BfS Coordinating Office on Incorporation Monitoring. (orig.)

Is the soil quality monitoring an effective tool in consumers' protection of agricultural crops from cadmium soil contamination?-a case of the Silesia region (Poland).

Science.gov (United States)

Piekut, Agata; Baranowska, Renata; Marchwińska-Wyrwał, Ewa; Ćwieląg-Drabek, Małgorzata; Hajok, Ilona; Dziubanek, Grzegorz; Grochowska-Niedworok, Elżbieta

2017-12-16

The monitoring of soil quality should be a control tool used to reduce the adverse health effects arising from exposure to toxic chemicals in soil through cultivated crop absorption. The aim of the study was to evaluate the effectiveness of the monitoring and control system of soil quality in Poland, in terms of consumer safety, for agricultural plants cultivated in areas with known serious cadmium contamination, such as Silesia Province. To achieve the objective, the contents of cadmium in soils and vegetables in the Silesia administrative area were examined. The obtained results were compared with the results of soil contamination from the quality monitoring of arable soil in Poland. The studies show a significant exceedance of the permissible values of cadmium in soil samples and the vegetables cultivated on that soil. The threat to consumer health is a valid concern, although this threat was not indicated by the results of the national monitoring of soil quality. The results indicated an unequal distribution of risk to consumers resulting from contaminated soil. Moreover, the monitoring systems should be designed at the local or regional scale to guarantee the safety of consumers of edible plants cultivated in the areas contaminated with cadmium.

Enhancing the sustainability of the Marine Coastal Environment of the Mediterranean, the Red Sea and the Gulf

International Nuclear Information System (INIS)

El Samad, O.

2012-01-01

This project enhances the national capabilities to monitor and assess contaminants in the marine environment that could be organic pollutants, radioactive materials and toxins. This will be very beneficial as, the monitoring processes and control of marine pollution is a very strategic important objective of the national institutes concerned with environmental protection and rehabilitation of the marine environment. (author)

Bee pollen as a bioindicator of environmental pesticide contamination.

Science.gov (United States)

de Oliveira, Renata Cabrera; Queiroz, Sonia Claudia do Nascimento; da Luz, Cynthia Fernandes Pinto; Porto, Rafael Silveira; Rath, Susanne

2016-11-01

Honeybees and bee products are potential bioindicators of the presence of contaminants in the environment, enabling monitoring of large areas due to the long distances travelled by bees. This work evaluates the use of bee pollen as a bioindicator of environmental contamination by pesticides. A GC-MS/MS analytical method for multiresidue determination of 26 different pesticides in pollen was developed and validated in accordance with the recommendations of the European Union SANCO guide. Environmental monitoring was conducted using the analysis of 145 pollen samples collected from ten beehives in the experimental apiary of Embrapa in Jaguariúna (São Paulo State, Brazil). Bioallethrin and pendimethalin were identified in four and eighteen samples, respectively, at concentrations below the LOQ of the method (25 ng g(-1)). Passive sampling with polyurethane foam discs was used as a control, and no pesticides were found. The detection of pesticide residues in seven samples (33%) from commercial apiaries in Ribeirão Preto (São Paulo State) confirmed the efficiency of the analytical method and the need for environmental monitoring for the presence of pesticide residues. The results demonstrated the potential of bee pollen as a bioindicator of environmental contamination by pesticides. Copyright © 2016 Elsevier Ltd. All rights reserved.

Baseline risk assessment of groundwater contamination at the Uranium Mill Tailings Site near Gunnison, Colorado

Energy Technology Data Exchange (ETDEWEB)

1993-12-01

This Baseline Risk Assessment of Groundwater Contamination at the Uranium Mill Tailings Site Near Gunnison, Colorado evaluates potential impacts to public health or the environment resulting from groundwater contamination at the former uranium mill processing site. The tailings and other contaminated material at this site are being placed in an off-site disposal cell by the US Department of Energy`s (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project. Currently, the UMTRA Project is evaluating groundwater contamination. This is the second risk assessment of groundwater contamination at this site. The first risk assessment was performed primarily to evaluate existing domestic wells. This risk assessment evaluates the most contaminated monitor wells at the processing site. It will be used to assist in determining what remedial action is needed for contaminated groundwater at the site after the tailings are relocated. This risk assessment follows an approach outlined by the US Environmental Protection Agency (EPA). The first step is to evaluate groundwater data collected from monitor wells at the site. Evaluation of these data showed that the main contaminants in the groundwater are cadmium, cobalt, iron, manganese, sulfate, uranium, and some of the products of radioactive decay of uranium.