WorldWideScience

Sample records for engineering perspective helena

  1. Neutron-irradiation + helium hardening and embrittlement modeling of 9% Cr-steels in an engineering perspective (HELENA)

    Energy Technology Data Exchange (ETDEWEB)

    Chaouadi, Rachid

    2008-07-01

    This report provides a physically-based engineering model to estimate the radiation hardening of 9%Cr-steels under both displacement damage (dpa) and helium. The model is essentially based on the dispersed barrier hardening theory and the dynamic re-solution of helium under displacement cascades. However, a number of assumptions and simplifications were considered to obtain a simple description of irradiation hardening and embrittlement primarily relying on the available experimental data. As a result, two components were basically identified, the dpa component that can be associated with black dots and small loops and the He-component accounting for helium bubbles. The dpa component is strongly dependent on the irradiation temperature and its dependence law was based on a first-order annealing kinetics. The damage accumulation law was also modified to take saturation into account. Finally, the global kinetics of the damage accumulation kept defined, its amplitude is fitted to one experimental condition. The model was rationalized on an experimental database that mainly consists of {proportional_to}9%Cr-steels irradiated in the technologically important temperature range of 50 to 600 C up do 50 dpa and with a He-content up to {proportional_to}5000 appm, including neutron and proton irradiation as well as implantation. The test temperature effect is taken into account through a normalization procedure based on the change of the Young's modulus and the anelastic deformation that occurs at high temperature. Finally, the hardening-to-embrittlement correlation is obtained using the load diagram approach. Despite the large experimental scatter, inherent to the variety of the materials and irradiation as well as testing conditions, the obtained results are very promising. Improvement of the model performance is still possible by including He-hardening saturation and high temperature softening but unfortunately, at this stage, a number of conflicting experimental data

  2. Helena liinid / Anneli Remme

    Index Scriptorium Estoniae

    Remme, Anneli, 1968-

    2008-01-01

    Helena Tulve autoriplaadist "Lijnen". Esitavad NYYD Ensemble, dirigent Olari Elts, Stockholm Saxophone Quartet, Silesian String Quartet, solistid Arianna Savall, Emmanuelle Ophele-Gaubert ja Mihkel Peäske

  3. Plasma engineering: a perspective

    International Nuclear Information System (INIS)

    Gralnick, S.L.

    1978-01-01

    This review paper will present the authors perspective of the field of Plasma Engineering as it has evolved over the preceding five years. This embrionic discipline has grown in that period of time to the point where it is sufficiently mature to become part of the curriculum, and a speciality within, the discipline of Nuclear Engineering. Plasma Engineering can be distinguished from the underlying science of plasma physics in that in the pursuit of the latter, our goal is the understanding of the fundamental processes governing the behavior of plasmas while the former discipline seeks the embodiment of these concepts in useful devices. Consequent to this goal, the plasma engineer, of necessity, is concerned with the interfaces between a plasma configuration and the device by which it is produced and maintained. These interface problems, often referred to as kitchen physics are multidisciplinary in nature, and their solution requires careful attention to both plasma physics and machine engineering detail

  4. Helena Jonsdottiri tantsud kaameraga / Helena Jonsdottir ; interv. Margit Tõnson

    Index Scriptorium Estoniae

    Jonsdottir, Helena

    2005-01-01

    Tartu vanglas filmitud tantsufilm "Teine" ("Another"), režissöör Rene Vilbre. Islandi koreograaf ja stsenaariumi autor Helena Jonsdottir räägib filmi tegemisest, lisatud fakte koreograafi loomingust

  5. October 1935 Helena, USA Images

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Location: almost directly beneath Helena. Affected area: 363,000 square kilometers. Damage: $4 million. A series of earthquakes beginning on October 3, 1935, shook...

  6. Teaching cloud computing: a software engineering perspective

    OpenAIRE

    Sommerville, Ian

    2012-01-01

    This short papers discusses the issues of teaching cloud computing from a software engineering rather than a business perspective. It discusses what topics might be covered in a senior course on cloud software engineering.

  7. Perspectives of ukrainian mechanical engineering development

    OpenAIRE

    Dyrda, E.; Schepetkova, A.; Galushko, O.

    2013-01-01

    Theses are devoted to problems and perspectives of Ukrainian mechanical engineering development. Role of mechanical engineering in national economy is described. Problems of mechanical engineering, such as losing the cometetive advantages, production decreasing, debts growing, ineffective assets structure, are investigated. Influence of European integration process on mechanical engineering enterprises is discussed.

  8. Cecilia Helena Payne-Gaposchkin

    Science.gov (United States)

    Braden, Antony; Contreras, Adelso

    2009-10-01

    This project will briefly tell the story of one of the 20^th century's most prominent astronomers, who through perseverance triumphed at the center of astrophysics. It also tells the story of the rough times in which Cecilia Helena Payne-Gaposchkin lived in as women then were held to much lower standards than they are today and endured unjust conditions. It also provides an analysis of the evolution of the astrophysics of stellar composition over a lengthy and prosperous career.

  9. LA MUERTE DE HELENA THE DEATH OF HELENA

    Directory of Open Access Journals (Sweden)

    Miguel Castillo Didier

    2011-10-01

    Full Text Available Los personajes de Homero parecen participar de la inmortalidad de la poesía homérica. Helena especialmente se nos muestra inmortal no sólo en la tradición literaria occidental, sino también en nuestra conciencia que la identifica con la perennidad de la belleza. Mientras los antiguos tuvieron a Helena por divinizada y, por lo tanto, ascendida a la inmortalidad, Kazantzakis, el poeta neogriego que retomó el viaje de odiseo, le da la muerte que no le dio Homero.Homer's characters seem to partake of the immortality of Homeric poetry. Especially Helen shows herself not only immortal in the Western literary tradition, but also in our consciousness that identifies with the survival of beauty. While the ancients thought Helen to have been deified and thus ascended to immortality, Kazantzakis, the modern Greek poet who resumed the journey of Odysseus, gives her the death that Homer gave not to her.

  10. Biomedical Engineering Education in Perspective

    Science.gov (United States)

    Gowen, Richard J.

    1973-01-01

    Discusses recent developments in the health care industry and their impact on the future of biomedical engineering education. Indicates that a more thorough understanding of the complex functions of the living organism can be acquired through the application of engineering techniques to problems of life sciences. (CC)

  11. The Social Role of Engineers: A Philosophical Perspective.

    Science.gov (United States)

    Vesilind, P. Aarne

    1991-01-01

    The perspectives that distinguish engineers and the public they serve and the educational implications of those perspectives are discussed. The philosophies of utilitarianism, ethical egoism, positivism, and idealism are presented in terms of engineers and the public. (KR)

  12. Bio-engineering - A Perspective

    African Journals Online (AJOL)

    fluid-mechanics engineers are collaborating in the design of devices for the exchange of substances between the body and the environment. The prime example is the artificial kidney, where there is great room for improvement in the efficiency of the conventional devices and a huge potential for the development of small, ...

  13. Financial Engineering: an Islamic Perspective

    OpenAIRE

    Suwailem, Sami Al

    2007-01-01

    Islamic financial industry is growing rapidly. Markets are increasingly appreciat-ing Islamic instruments, and more institutions are willing to provide Islamic services to their clients. However, development of Islamic financial products through appropriate processes of financial engineering has remained an important area of researches. Two issues are always faced by any Islamic financial products in one go, competitiveness and shariah compliance. Not only Islamically acceptable, but any Isla...

  14. Perspectives of genetic engineering in radiobiology

    International Nuclear Information System (INIS)

    Khanson, K.P.; Zvonareva, N.B.; Evtushenko, V.I.

    1988-01-01

    Present evidence on the use of genetic engineering methods in studying the molecular mechanism of radiation damage and repair of DNA, as well as radiation mutagenesis and carcinogenesis has been summarized. The new approach to radiobiological research has proved to be extremely fruitful. Some previously unknown types of structural disorders in DNA molecule have been discovered, some repair genes isolated and their primary structure established, some aspects of radiation mutagenesis elucidated, and research into disiphering the molecular bases of neoplastic transformations of exposed cells are being successfully investigated. The perspectives of using genetic engineering methods in radiobiology are discussed

  15. Mathematical modeling a chemical engineer's perspective

    CERN Document Server

    Rutherford, Aris

    1999-01-01

    Mathematical modeling is the art and craft of building a system of equations that is both sufficiently complex to do justice to physical reality and sufficiently simple to give real insight into the situation. Mathematical Modeling: A Chemical Engineer's Perspective provides an elementary introduction to the craft by one of the century's most distinguished practitioners.Though the book is written from a chemical engineering viewpoint, the principles and pitfalls are common to all mathematical modeling of physical systems. Seventeen of the author's frequently cited papers are reprinted to illus

  16. Kuidas Helena Bonham Carter ahviks muutus

    Index Scriptorium Estoniae

    2001-01-01

    Taas on ekraanile jõudnud "Ahvide planeet" ("Planet of the Apes") : režissöör Tim Burton : Ameerika Ühendriigid 2001. Kuidas tehti näitlejatele ahvide grimmi. Lähemalt Helena Bonham Carteri grimmist

  17. A Software Engineering Perspective on Cryptocurrencies

    OpenAIRE

    Hofer, Nicolas

    2014-01-01

    This work evaluates a digital cash phenomenon, called cryptocurrencies that was started in early 2009 and has created a buzz at the latest in the year 2013, by the virtual explosion of prices in currencies (e.g. prices in EUR or USD) for certain cryptocurrencies, especially for bitcoin. The evaluation is realized from the perspective of a software engineer. The central research question is derived of a claim made by the Bitcoin community: Bitcoin does create “a new kind of mone...

  18. Helena Paz-Elena Garro: La Memoria Compartida Helena Paz-Elena Garro: La Memoria Compartida

    Directory of Open Access Journals (Sweden)

    Ana María Alba Villalobos

    2012-02-01

    Full Text Available En el texto se analizan las Memorias de Helena Paz, a la luz de los textos autobiográficos y biográficos acerca de la vida de Elena Garro. El planteamiento estriba en que hay muchos elementos que permiten afirmar que una parte sustancial de las memorias (inéditas de Elena Garro se encuentran insertas en las Memorias de su hija, Helena Paz. Se muestran aquí los argumentos para tal aseveración y los fragmentos que corresponderían a las vivencias de la madre, más que de la hija This text analyzes Helena Paz’s Memoirs, in the light of the autobiographical and biographical texts about Elena Garro’s life. The thesis of the text is that there are many elements supporting the statement that a substantial part of Elena Garro’s unedited memoirs are found inserted in her daughter’s (Helena Paz’s Memoirs. Arguments for such an assertion are presented, together with the excerpts which would correspond more to the experiences of the mother than to those of the daughter.

  19. Viewing engineering offshoring in a network perspective

    DEFF Research Database (Denmark)

    Hansen, Zaza Nadja Lee; Zhang, Yufeng; Ahmed-Kristensen, Saeema

    2013-01-01

    Purpose – Companies are increasingly engaged with global engineering networks through offshoring of product development activities from R&D to production. This creates many new challenges as operations get physically and culturally decoupled. The purpose of this paper is to improve understanding...... a systematic approach to understanding global engineering networks through investigating their contextual features, critical capabilities to compete in a particular contextual circumstance, and configuration characteristics to deliver the capabilities. Using the GEN framework, the challenges faced by companies...... of how to effectively manage engineering offshoring activities in a context of global engineering networks. The main research question, therefore, is: “Can offshoring of engineering tasks be explained and managed using the concept of Global Engineering Networks (GEN)?” Effective approaches to handling...

  20. Philosophical, logical and scientific perspectives in engineering

    CERN Document Server

    Sen, Zekâi

    2013-01-01

    This book highlights and explains the significance of philosophical, logical, and scientific principles for engineering education/training and engineering works. In so doing, it aims to help to rectify the neglect of philosophy and logic in current education and training programs, which emphasize analytical and numerical methods at the expense of the innovative practical and creative abilities so important for engineering in the past. Individual chapters examine the relation of philosophy, logic, and science to engineering, drawing attention to, for example, the significance of ethics, the rel

  1. Software engineering from a Langley perspective

    Science.gov (United States)

    Voigt, Susan

    1994-01-01

    A brief introduction to software engineering is presented. The talk is divided into four sections beginning with the question 'What is software engineering', followed by a brief history of the progression of software engineering at the Langley Research Center in the context of an expanding computing environment. Several basic concepts and terms are introduced, including software development life cycles and maturity levels. Finally, comments are offered on what software engineering means for the Langley Research Center and where to find more information on the subject.

  2. Engineering, Development and Philosophy American, Chinese and European Perspectives

    CERN Document Server

    Mitcham, Carl; Li, Bocong; An, Yanming

    2012-01-01

    This inclusive, cross-cultural study rethinks the nexus between engineering, development, and culture. It offers diverse commentary from a range of disciplinary perspectives on how the philosophies of today’s cultural triumvirate—American, European and Chinese—are shaped and given nuance by the cross-fertilization of engineering and development. Scholars from the humanities and social sciences as well as engineers themselves reflect on key questions that arise in this relational context, such as how international development work affects the professional views, identities, practice and ethics of engineers.   The first volume to offer a systematic and collaborative study that cuts across continental boundaries, the book delineates the kinds of skills and competences that tomorrow’s engineering success stories will require, and analyzes fascinating aspects of the interplay between engineering and philosophy, such as how traditionally Chinese ways of thinking can influence modern engineering practice in...

  3. Biomedical engineering education--status and perspectives.

    Science.gov (United States)

    Magjarevic, Ratko; Zequera Diaz, Martha L

    2014-01-01

    Biomedical Engineering programs are present at a large number of universities all over the world with an increasing trend. New generations of biomedical engineers have to face the challenges of health care systems round the world which need a large number of professionals not only to support the present technology in the health care system but to develop new devices and services. Health care stakeholders would like to have innovative solutions directed towards solving problems of the world growing incidence of chronic disease and ageing population. These new solutions have to meet the requirements for continuous monitoring, support or care outside clinical settlements. Presence of these needs can be tracked through data from the Labor Organization in the U.S. showing that biomedical engineering jobs have the largest growth at the engineering labor market with expected 72% growth rate in the period from 2008-2018. In European Union the number of patents (i.e. innovation) is the highest in the category of biomedical technology. Biomedical engineering curricula have to adopt to the new needs and for expectations of the future. In this paper we want to give an overview of engineering professions in related to engineering in medicine and biology and the current status of BME education in some regions, as a base for further discussions.

  4. New perspectives for advanced automobile diesel engines

    Science.gov (United States)

    Tozzi, L.; Sekar, R.; Kamo, R.; Wood, J. C.

    1983-01-01

    Computer simulation results are presented for advanced automobile diesel engine performance. Four critical factors for performance enhancement were identified: (1) part load preheating and exhaust gas energy recovery, (2) fast heat release combustion process, (3) reduction in friction, and (4) air handling system efficiency. Four different technology levels were considered in the analysis. Simulation results are compared in terms of brake specific fuel consumption and vehicle fuel economy in km/liter (miles per gallon). Major critical performance sensitivity areas are: (1) combustion process, (2) expander and compressor efficiency, and (3) part load preheating and compound system. When compared to the state of the art direct injection, cooled, automobile diesel engine, the advanced adiabatic compound engine concept showed the unique potential of doubling the fuel economy. Other important performance criteria such as acceleration, emissions, reliability, durability and multifuel capability are comparable to or better than current passenger car diesel engines.

  5. Advances and perspectives in tooth tissue engineering.

    Science.gov (United States)

    Monteiro, Nelson; Yelick, Pamela C

    2017-09-01

    Bio-engineered teeth that can grow and remodel in a manner similar to that of natural teeth have the potential to serve as permanent replacements to the currently used prosthetic teeth, such as dental implants. A major challenge in designing functional bio-engineered teeth is to mimic both the structural and anisotropic mechanical characteristics of the native tooth. Therefore, the field of dental and whole tooth regeneration has advanced towards the molecular and nanoscale design of bio-active, biomimetic systems, using biomaterials, drug delivery systems and stem cells. The focus of this review is to discuss recent advances in tooth tissue engineering, using biomimetic scaffolds that provide proper architectural cues, exhibit the capacity to support dental stem cell proliferation and differentiation and sequester and release bio-active agents, such as growth factors and nucleic acids, in a spatiotemporal controlled manner. Although many in vitro and in vivo studies on tooth regeneration appear promising, before tooth tissue engineering becomes a reality for humans, additional research is needed to perfect methods that use adult human dental stem cells, as opposed to embryonic dental stem cells, and to devise the means to generate bio-engineered teeth of predetermined size and shape. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  6. Learning Theories and Assessment Methodologies--An Engineering Educational Perspective

    Science.gov (United States)

    Hassan, O. A. B.

    2011-01-01

    This paper attempts to critically review theories of learning from the perspective of engineering education in order to align relevant assessment methods with each respective learning theory, considering theoretical aspects and practical observations and reflections. The role of formative assessment, taxonomies, peer learning and educational…

  7. A transatlantic perspective on 20 emerging issues in biological engineering.

    Science.gov (United States)

    Wintle, Bonnie C; Boehm, Christian R; Rhodes, Catherine; Molloy, Jennifer C; Millett, Piers; Adam, Laura; Breitling, Rainer; Carlson, Rob; Casagrande, Rocco; Dando, Malcolm; Doubleday, Robert; Drexler, Eric; Edwards, Brett; Ellis, Tom; Evans, Nicholas G; Hammond, Richard; Haseloff, Jim; Kahl, Linda; Kuiken, Todd; Lichman, Benjamin R; Matthewman, Colette A; Napier, Johnathan A; ÓhÉigeartaigh, Seán S; Patron, Nicola J; Perello, Edward; Shapira, Philip; Tait, Joyce; Takano, Eriko; Sutherland, William J

    2017-11-14

    Advances in biological engineering are likely to have substantial impacts on global society. To explore these potential impacts we ran a horizon scanning exercise to capture a range of perspectives on the opportunities and risks presented by biological engineering. We first identified 70 potential issues, and then used an iterative process to prioritise 20 issues that we considered to be emerging, to have potential global impact, and to be relatively unknown outside the field of biological engineering. The issues identified may be of interest to researchers, businesses and policy makers in sectors such as health, energy, agriculture and the environment.

  8. Learning theories and assessment methodologies - an engineering educational perspective

    Science.gov (United States)

    Hassan, O. A. B.

    2011-08-01

    This paper attempts to critically review theories of learning from the perspective of engineering education in order to align relevant assessment methods with each respective learning theory, considering theoretical aspects and practical observations and reflections. The role of formative assessment, taxonomies, peer learning and educational policy as regards promoting the learning of engineering is discussed. It is suggested that an integrated learning method in which cognitive levels, social factors and teamwork and behaviouristic elements are integrated will optimise the learning process on an engineering course. Moreover, assessment of learning should not be isolated from views of teaching and the learning methods employed by the university teacher.

  9. Web Search Studies: Multidisciplinary Perspectives on Web Search Engines

    Science.gov (United States)

    Zimmer, Michael

    Perhaps the most significant tool of our internet age is the web search engine, providing a powerful interface for accessing the vast amount of information available on the world wide web and beyond. While still in its infancy compared to the knowledge tools that precede it - such as the dictionary or encyclopedia - the impact of web search engines on society and culture has already received considerable attention from a variety of academic disciplines and perspectives. This article aims to organize a meta-discipline of “web search studies,” centered around a nucleus of major research on web search engines from five key perspectives: technical foundations and evaluations; transaction log analyses; user studies; political, ethical, and cultural critiques; and legal and policy analyses.

  10. The Square Kilometre Array: An Engineering Perspective

    CERN Document Server

    Hall, Peter J

    2005-01-01

    This volume is an up-to-date and comprehensive overview of the engineering of the Square Kilometre Array (SKA), a revolutionary instrument which will be the world’s largest radio telescope. Expected to be completed by 2020, the SKA will be a pre-eminent tool in probing the Early Universe and in enhancing greatly the discovery potential of radio astronomy in many other fields. This book, containing 36 refereed papers written by leaders in SKA engineering, has been compiled by the International SKA Project Office and is the only contemporary compendium available. It features papers dealing with pivotal technologies such as antennas, RF systems and data transport. As well, overviews of important SKA demonstrator instruments and key system design issues are included. Practising professionals, and students interested in next-generation telescopes, will find this book an invaluable reference.

  11. Decisions an engineering and management perspective

    CERN Document Server

    Gaynor, G

    2015-01-01

    This book considers what it takes to convert the macro decision into a positive outcome; to resolve the gap that exists between the macro and subsidiary decisions; to understand why so many decisions fail to meet expectations; to direct the mindset of the engineering community to focus on its relation to other organizational units; to perform diligently the up-front work required to meet objectives; to stop squandering valuable talent and resources; to urge engineers and other discipline professionals to take a more business-oriented approach in participating in the organization's decision-making process; lastly, to not only recognize the importance of and the role of communication in all decision-making processes, but to initiate appropriate communication processes.

  12. A company perspective on software engineering standards

    International Nuclear Information System (INIS)

    Steer, R.W.

    1988-01-01

    Software engineering standards, as implemented via formal policies and procedures, have historically been used in the nuclear industry, especially for codes used in the design, analysis, or operation of the plant. Over the past two decades, a significant amount of software has been put in place to perform these functions, while the overall software life cycle has become better understood, more and different computer systems have become available, and industry has become increasingly aware of the advantages gained when these procedures are used in the development and maintenance of this large amount of software. The use of standards and attendant procedures is thus becoming increasingly important as more computerization is taking place, both in the design and the operation of the plant. It is difficult to categorize software used in activities related to nuclear plants in a simple manner. That difficulty is due to the diversity of those uses, with attendant diversity in the methods and procedures used in the production of the software, compounded by a changing business climate in which significant software engineering expertise is being applied to a broader range of applications on a variety of computing systems. The use of standards in the various phases of the production of software thus becomes more difficult as well. This paper discusses the various types of software and the importance of software standards in the development of each of them

  13. The evolution of CACSD tools-a software engineering perspective

    DEFF Research Database (Denmark)

    Ravn, Ole; Szymkat, Maciej

    1992-01-01

    The earlier evolution of computer-aided control system design (CACSD) tools is discussed from a software engineering perspective. A model of the design process is presented as the basis for principles and requirements of future CACSD tools. Combinability, interfacing in memory, and an open...... workspace are seen as important concepts in CACSD. Some points are made about the problem of buy or make when new software is required, and the idea of buy and make is put forward. Emphasis is put on the time perspective and the life cycle of the software...

  14. Engineers' professional learning: a practice-theory perspective

    Science.gov (United States)

    Reich, Ann; Rooney, Donna; Gardner, Anne; Willey, Keith; Boud, David; Fitzgerald, Terry

    2015-07-01

    With the increasing challenges facing professional engineers working in more complex, global and interdisciplinary contexts, different approaches to understanding how engineers practice and learn are necessary. This paper draws on recent research in the social sciences from the field of workplace learning, to suggest that a practice-theory perspective on engineers' professional learning is fruitful. It shifts the focus from the attributes of the individual learner (knowledge, skills and attitudes) to the attributes of the practice (interactions, materiality, opportunities and challenges). Learning is thus more than the technical acquisition and transfer of knowledge, but a complex bundle of activities, that is, social, material, embodied and emerging. The paper is illustrated with examples from a research study of the learning of experienced engineers in the construction industry to demonstrate common practices - site walks and design review meetings - in which learning takes place.

  15. Exploring the Islamic Perspective on Tissue Engineering Principles and Practice

    Directory of Open Access Journals (Sweden)

    Munirah, S.

    2014-12-01

    Full Text Available Tissue engineering is related to the replacement, restoration, repair and/or regeneration of tissues/organs that are tailored to the needs of the individual patient. The potential applications of tissue engineering are being unveiled with much hype and expectations among the scientists and the public at large. The demand for engineered tissues may increase considerably, but the progress has been slow due to scientific and technical challenges that linked to moral, religious, philosophical, political and economic aspects. There are ongoing debates on certain aspects that seem to indicate that scientists maybe “playing God”. This article briefly analyses tissue engineering principles and the discourse surrounding it. Subsequently, the author briefly reflects on the Islamic perspectives, both for and against the technology. The discussions serve to provide a platform on how best to achieve a consensus that adequately deals with the scientific reality and the Islamic moral and legal jurisprudence that surrounds the technology.

  16. The state and perspective of Belarus power engineering

    International Nuclear Information System (INIS)

    Mikhalevich, A.A.; Molochko, F.I.

    1994-01-01

    The economy of the Republic of Belarus has a high fuel and power resource deficit. In according to the National power engineering programme the power balance must be achieved by means of reconstruction and development of the energetics system on the basis of difference modern technologies, as well as carrying out power saving programme, It is suggested the building of a nuclear power plant in Belarus. The power engineering development directions for Belarus is discussed. The structure and dynamics of a power balance of the economy is described. It was shown the electric and heat energetics perspectives for Belarus by using of difference power sources. 3 tabs., 4 figs

  17. Saint Helena: Citizenship and spatial identities on a remote island

    NARCIS (Netherlands)

    Hogenstijn, M.; Middelkoop, D.P. van

    2005-01-01

    Saint Helena is an extremely isolated island in the South Atlantic. It is connected to the outside world through the Internet, telephone and a shipping link. Its inhabitants, who call themselves Saints, were denied full British citizenship until May 2002. This prevented a large out-migration. At

  18. St Helena Bay (southern Benguela) then and now: muted climate ...

    African Journals Online (AJOL)

    Conservation measures, implemented to reverse past negative human impact, have benefitted marine mammals, the abundance of which has increased in the area, but additional conservation measures are necessary to reverse the decline in African penguins Spheniscus demersus. St Helena Bay shows a muted ...

  19. Cartilage engineering in reconstructive surgery: auricular, nasal and tracheal engineering from a surgical perspective.

    Science.gov (United States)

    Wiggenhauser, Paul Severin; Schantz, Jan Thorsten; Rotter, Nicole

    2017-04-01

    This review provides an update on cartilage tissue engineering with particular focus on the head and neck. It is aimed at scientists and clinicians who are interested in tissue engineering and its clinical applicability. Principal tissue engineering strategies are summarized in the first part of this review. In the second part, current clinical approaches to auricular, nasal and tracheal reconstruction are discussed from a surgical perspective. By this approach, the requirements for clinical applicability are outlined and new insight into relevant aims of research is given to accelerate the transfer from bench to bedside.

  20. Power plant engineering: State of the art and perspectives

    International Nuclear Information System (INIS)

    Schilling, H.D.

    1989-01-01

    Power station engineering has a great number of perspectives some of which project far into the future. While nuclear energy will be aimed long-term at further developments in the technology of both large and small-sized high-temperature nuclear reactors and breeder reactors, in the next decades coal-fired power station engineering is expected to undergo a lasting structural change, the beginning of which we are just witnessing. The first phase after World War II was characterized by the transition from bus bar to unit station engineering with its trend towards greater unit outputs and associated structural changes in plant, machinery and control technologies. The second phase is characterized by retrofitting the ending of which is expected by 1993 at the latest when old plants unsuitable for retrofitting will have been shut down. In parallel, measures for extending service lives in both nuclear and fossil fuel installations will increase. A third phase indicates a new generation of power stations which will be characterized by the technologies of fluidized-bed combustion and combined cycles with integrated coal gasification. Again, this phase has already begun and harbours considerable reserves for development. Long-term trends suggest that the vertical structure of energy generation engineering will be abandoned for integrated processes which will be dominated by high-temperature nuclear energy. This considerable potential opens up major perspectives for a lasting reduction of emissions, espec. CO 2 . (orig.) [de

  1. Automotive fuels and internal combustion engines: a chemical perspective.

    Science.gov (United States)

    Wallington, T J; Kaiser, E W; Farrell, J T

    2006-04-01

    Commercial transportation fuels are complex mixtures containing hundreds or thousands of chemical components, whose composition has evolved considerably during the past 100 years. In conjunction with concurrent engine advancements, automotive fuel composition has been fine-tuned to balance efficiency and power demands while minimizing emissions. Pollutant emissions from internal combustion engines (ICE), which arise from non-ideal combustion, have been dramatically reduced in the past four decades. Emissions depend both on the engine operating parameters (e.g. engine temperature, speed, load, A/F ratio, and spark timing) and the fuel. These emissions result from complex processes involving interactions between the fuel and engine parameters. Vehicle emissions are comprised of volatile organic compounds (VOCs), CO, nitrogen oxides (NO(x)), and particulate matter (PM). VOCs and NO(x) form photochemical smog in urban atmospheres, and CO and PM may have adverse health impacts. Engine hardware and operating conditions, after-treatment catalysts, and fuel composition all affect the amount and composition of emissions leaving the vehicle tailpipe. While engine and after-treatment effects are generally larger than fuel effects, engine and after-treatment hardware can require specific fuel properties. Consequently, the best prospects for achieving the highest efficiency and lowest emissions lie with optimizing the entire fuel-engine-after-treatment system. This review provides a chemical perspective on the production, combustion, and environmental aspects of automotive fuels. We hope this review will be of interest to workers in the fields of chemical kinetics, fluid dynamics of reacting flows, atmospheric chemistry, automotive catalysts, fuel science, and governmental regulations.

  2. Engineering Value-Effective Healthcare Solutions: A Systems Design Perspective

    DEFF Research Database (Denmark)

    Patou, François; Maier, Anja

    2017-01-01

    Our modern healthcare systems commonly face an important dilemma. While they depend on innovation to provide continuously greater healthcare value, they also struggle financially with the burden of adopting a continuous flow of new products and services. Although several disruptive healthcare...... of Design for Evolvability and by elaborating on two examples: MRI systems and Point-of-Care in-vitro diagnostics solutions. We specifically argue that Design for Evolvability can realign the agendas of various healthcare stakeholders, serving both individual and national interests. We finally acknowledge...... the limitations of current engineering design practices and call for new theoretical and empirical research initiatives taking a systems perspective on healthcare product and service design....

  3. PERSPECTIVE: Translational neural engineering: multiple perspectives on bringing benchtop research into the clinical domain

    Science.gov (United States)

    Rousche, Patrick; Schneeweis, David M.; Perreault, Eric J.; Jensen, Winnie

    2008-03-01

    A half-day forum to address a wide range of issues related to translational neural engineering was conducted at the annual meeting of the Biomedical Engineering Society. Successful practitioners of translational neural engineering from academics, clinical medicine and industry were invited to share a diversity of perspectives and experiences on the translational process. The forum was targeted towards traditional academic researchers who may be interested in the expanded funding opportunities available for translational research that emphasizes product commercialization and clinical implementation. The seminar was funded by the NIH with support from the Rehabilitation Institute of Chicago. We report here a summary of the speaker viewpoints with particular focus on extracting successful strategies for engaging in or conducting translational neural engineering research. Daryl Kipke, PhD, (Department of Biomedical Engineering at the University of Michigan) and Molly Shoichet, PhD, (Department of Chemical Engineering at the University of Toronto) gave details of their extensive experience with product commercialization while holding primary appointments in academic departments. They both encouraged strong clinical input at very early stages of research. Neurosurgeon Fady Charbel, MD, (Department of Neurosurgery at the University of Illinois at Chicago) discussed his role in product commercialization as a clinician. Todd Kuiken, MD, PhD, (Director of the Neural Engineering for Artificial Limbs at the Rehabilitation Institute of Chicago, affiliated with Northwestern University) also a clinician, described a model of translational engineering that emphasized the development of clinically relevant technology, without a strong commercialization imperative. The clinicians emphasized the importance of communicating effectively with engineers. Representing commercial neural engineering was Doug Sheffield, PhD, (Director of New Technology at Vertis Neuroscience, Inc.) who

  4. Dismantling of nuclear facilities. From a structural engineering perspective

    International Nuclear Information System (INIS)

    Block, Carsten; Henkel, Fritz-Otto; Bauer, Thomas

    2014-01-01

    The paper summarizes some important aspects, requirements and technical boundary conditions that need to be considered in dismantling projects in the nuclear sector from a structural engineering perspective. Besides general requirements regarding radiation protection, occupational safety, efficiency and cost effectiveness it is important to take into account other conditions which have a direct impact on technical details and the structural assessment of the dismantling project. These are the main aspects highlighted in this paper: - The structural assessment of dismantling projects has to be based on the as-built situation. - The limitations in terms of available equipment and space have to be taken into account. - The structural assessments are often non-standardized engineering evaluations. A selection of five dismantling projects illustrates the various structural aspects. (orig.)

  5. A Systems-Level Perspective on Engine Ice Accretion

    Science.gov (United States)

    May, Ryan D.; Guo, Ten-Huei; Simon, Donald L.

    2013-01-01

    The accretion of ice in the compression system of commercial gas turbine engines operating in high ice water content conditions is a safety issue being studied by the aviation sector. While most of the research focuses on the underlying physics of ice accretion and the meteorological conditions in which accretion can occur, a systems-level perspective on the topic lends itself to potential near-term operational improvements. This work focuses on developing an accurate and reliable algorithm for detecting the accretion of ice in the low pressure compressor of a generic 40,000 lbf thrust class engine. The algorithm uses only the two shaft speed sensors and works regardless of engine age, operating condition, and power level. In a 10,000-case Monte Carlo simulation, the detection approach was found to have excellent capability at determining ice accretion from sensor noise with detection occurring when ice blocks an average of 6.8% of the low pressure compressor area. Finally, an initial study highlights a potential mitigation strategy that uses the existing engine actuators to raise the temperature in the low pressure compressor in an effort to reduce the rate at which ice accretes.

  6. Helena o el mar del verano (1952 y la novela lírica

    Directory of Open Access Journals (Sweden)

    Casas, Ana

    2008-12-01

    Full Text Available After analysing the reception and context of Julián Ayesta’s Helena o el mar del verano (1952, this paper examines the diverse formal resources that connect this work to the genre of lyrical novel. From this perspective, it puts special attention to the subjectivity of the text, which particularly shows the consciousness of the child who progressively becomes an adult, rather than the objective representation of the world. Thus, the circular structure, the fragmentarism, the division of the story in scenes or the descriptive stillness are part of the narrator’s internalization of time and space, whose experience of the past has not concluded, for it continues to be alive for him.Tras reseñar la recepción de Helena o el mar del verano (1952, de Julián Ayesta, y enmarcarla en su contexto, el presente trabajo analiza los diversos recursos formales que relacionan esta obra con el género de la novela lírica. Desde esta perspectiva, se interesa por el subjetivismo del relato, el cual se afana en plasmar la conciencia del niño que deviene progresivamente adulto, y no tanto en representar el mundo de manera objetiva. Así, la estructura circular, el fragmentarismo, la división del relato en escenas o el estatismo descriptivo participan de la interiorización del tiempo y el espacio por parte de un narrador cuya experiencia del pasado no ha concluido, pues para él sigue estando viva.

  7. Undergraduate engineering students' experiences of interdisciplinary learning: a phenomenographic perspective

    Science.gov (United States)

    Hsu, Ming-Chien

    Engineers are expected to work with people with different disciplinary knowledge to solve real-world problems that are inherently complex, which is one of the reasons that interdisciplinary learning has become a common pedagogical practice in engineering education. However, empirical evidence on the impact of interdisciplinary learning on undergraduates is lacking. Regardless of the differences in the scope of methods used to assess interdisciplinary learning, frameworks of interdisciplinary learning are imperative for developing attainable outcomes as well as interpreting assessment data. Existing models of interdisciplinary learning have been either conceptual or based on research faculty members' experiences rather than empirical data. The study addressed the gap by exploring the different ways that undergraduate engineering students experience interdisciplinary learning. A phenomenographic methodological framework was used to guide the design, data collection, and data analysis of the study. Twenty-two undergraduate engineering students with various interdisciplinary learning experiences were interviewed using semi-structured protocols. They concretely described their experiences and reflected meaning associated with those experiences. Analysis of the data revealed eight qualitatively different ways that students experience interdisciplinary learning, which include: interdisciplinary learning as (A) no awareness of differences, (B) control and assertion, (C) coping with differences, (D) navigating creative differences, (E) learning from differences, (F) bridging differences, (G) expanding intellectual boundaries, and (H) commitment to holistic perspectives. Categories D through H represent a hierarchical structure of increasingly comprehensive way of experiencing interdisciplinary learning. Further analysis uncovered two themes that varied throughout the categories: (i) engagement with differences and (ii) purpose and integration. Students whose experiences lie

  8. 76 FR 30422 - Notice of Intent To Rule on Request To Release Airport Property at the Helena Regional Airport...

    Science.gov (United States)

    2011-05-25

    ... on Request To Release Airport Property at the Helena Regional Airport, Helena, Montana AGENCY... Release Airport Property. SUMMARY: The FAA proposes to rule and invite public comment on the release of land at Helena Regional Airport (HLN) under the provisions of Section 125 of the Wendell H. Ford...

  9. HELENA stage 2—danish overview

    DEFF Research Database (Denmark)

    Tell, Paolo; Pfeiffer, Rolf Helge; Schultz, Ulrik Pagh

    2017-01-01

    Since the early days of software engineering, a number of methods, processes, and practices to design and develop software systems have been proposed and applied in industry, e.g., the Rational Unified Process, Agile Software Development, etc. However, since no silver bullet exists, organizations...

  10. 76 FR 70955 - Helena Nation Forest: Dalton Mountain Forest Restoration & Fuels Reduction Project

    Science.gov (United States)

    2011-11-16

    ... Forest Service Helena Nation Forest: Dalton Mountain Forest Restoration & Fuels Reduction Project AGENCY: Forest Service, USDA. ACTION: Notice of intent to prepare an environmental impact statement. SUMMARY: The Helena National Forest (HNF) is proposing on the Lincoln Ranger District both commercial and non...

  11. Using Ontological Engineering to Overcome AI-ED Problems: Contribution, Impact and Perspectives

    Science.gov (United States)

    Mizoguchi, Riichiro; Bourdeau, Jacqueline

    2016-01-01

    This article reflects on the ontology engineering methodology discussed by the paper entitled "Using Ontological Engineering to Overcome AI-ED Problems" published in this journal in 2000. We discuss the achievements obtained in the last 10 years, the impact of our work as well as recent trends and perspectives in ontology engineering for…

  12. The winter St. Helena climate index and extreme Benguela upwelling

    Science.gov (United States)

    Hagen, Eberhard; Agenbag, Jacobus J.; Feistel, Rainer

    2005-09-01

    Climate changes in the subtropical South-east Atlantic turn out to be well described by the St. Helena Island Climate Index (HIX) and observed fluctuations are in good agreement with inter-decadal variability of the entire South Atlantic Ocean. Year-to-year variations of the averaged austral winter HIX (July-September), representative of the main upwelling season, were compared with (i) corresponding averages of the geostrophic alongshore component of the south-east trade wind (SET) between St. Helena Island in the south-west and Luanda/Angola in the north-east, (ii) the meridional distribution of surface waters colder than 13 °C to characterise intense Benguela upwelling (IBU), and (iii) the meridional position of the Angola-Benguela Frontal Zone (ABFZ) determined by means of sea surface temperature images for offshore distances between 50 and 400 km. Temporal changes of these parameters were investigated and showed that the frequency of consecutive years of strong and relaxed Benguela upwelling is characterised by a quasi-cycle of about 11-14 years. It is proposed that the index of the winter HIX may be used as a 'surveyor's rod' to describe interannual changes in the Benguela upwelling regime as well as those of the embedded marine ecosystem.

  13. The Blood-Brain Barrier: An Engineering Perspective

    Directory of Open Access Journals (Sweden)

    Andrew eWong

    2013-08-01

    Full Text Available It has been more than 100 years since Paul Ehrlich reported that various water-soluble dyes injected into the circulation did not enter the brain. Since Ehrlich’s first experiments, only a small number of molecules, such as alcohol and caffeine have been found to cross the blood-brain barrier, and it remains the major roadblock to treatment of many central nervous system diseases. At the same time, many central nervous system diseases are associated with disruption of the blood-brain barrier that can lead to changes in permeability, modulation of immune cell transport, and trafficking of pathogens into the brain. Therefore advances in our understanding of the structure and function of the blood-brain barrier are key to advances in treatment of a wide range of central nervous system diseases. Over the past 10 years it has become recognized that the blood-brain barrier is a complex dynamic system that involves biomechanical and biochemical signaling between the vascular system and the brain. Here we reconstruct the structure, function, and transport properties of the blood-brain barrier from an engineering perspective. New insight into the physics of the blood-brain barrier could ultimately lead to clinical advances in the treatment of central nervous system diseases.

  14. Diversity and characterization of culturable fungi from marine sediment collected from St. Helena Bay, South Africa

    CSIR Research Space (South Africa)

    Mouton, M

    2012-08-01

    Full Text Available . Helena Bay, on the west coast of the Western Cape, South Africa. Using dilution, enrichment, and repetitive culturing techniques, 59 fungal isolates were obtained from marine sediments and identified to at least genus level using morphological...

  15. Expression of the Retrotransposon Helena Reveals a Complex Pattern of TE Deregulation in Drosophila Hybrids.

    Directory of Open Access Journals (Sweden)

    Valèria Romero-Soriano

    Full Text Available Transposable elements (TEs, repeated mobile sequences, are ubiquitous in the eukaryotic kingdom. Their mobilizing capacity confers on them a high mutagenic potential, which must be strongly regulated to guarantee genome stability. In the Drosophila germline, a small RNA-mediated silencing system, the piRNA (Piwi-interacting RNA pathway, is the main responsible TE regulating mechanism, but some stressful conditions can destabilize it. For instance, during interspecific hybridization, genomic stress caused by the shock of two different genomes can lead, in both animals and plants, to higher transposition rates. A recent study in D. buzatii-D. koepferae hybrids detected mobilization of 28 TEs, yet little is known about the molecular mechanisms explaining this transposition release. We have characterized one of the mobilized TEs, the retrotransposon Helena, and used quantitative expression to assess whether its high transposition rates in hybrids are preceded by increased expression. We have also localized Helena expression in the gonads to see if cellular expression patterns have changed in the hybrids. To give more insight into changes in TE regulation in hybrids, we analysed Helena-specific piRNA populations of hybrids and parental species. Helena expression is not globally altered in somatic tissues, but male and female gonads have different patterns of deregulation. In testes, Helena is repressed in F1, increasing then its expression up to parental values. This is linked with a mislocation of Helena transcripts along with an increase of their specific piRNA levels. Ovaries have additive levels of Helena expression, but the ping-pong cycle efficiency seems to be reduced in F1 hybrids. This could be at the origin of new Helena insertions in hybrids, which would be transmitted to F1 hybrid female progeny.

  16. Dietary sources of sugars in adolescents' diet: the HELENA study.

    Science.gov (United States)

    Mesana, M I; Hilbig, A; Androutsos, O; Cuenca-García, M; Dallongeville, J; Huybrechts, I; De Henauw, S; Widhalm, K; Kafatos, A; Nova, E; Marcos, A; González-Gross, M; Molnar, D; Gottrand, F; Moreno, L A

    2018-03-01

    To report dietary sugars consumption and their different types and food sources, in European adolescents. Food consumption data of selected groups were obtained from 1630 adolescents (45.6% males, 12.5-17.5 years) from the HELENA study using two nonconsecutive 24-h recalls. Energy intake, total sugars and free sugars were assessed using the HELENA-DIAT software. Multiple regression analyses were performed adjusting for relevant confounders. Total sugars intake (137.5 g/day) represented 23.6% and free sugars (110.1 g/day), 19% of energy intake. Girls had significantly lower intakes of energy, carbohydrates, total sugars and free sugars. 94% of adolescents had a consumption of free sugars above 10% of total energy intake. The main food contributor to free sugars was 'carbonated, soft and isotonic drinks,' followed by 'non-chocolate confectionary' and 'sugar, honey, jam and syrup.' Older boys and girls had significantly higher intakes of free sugars from 'cakes, pies and biscuits.' Free sugars intake was negatively associated with low socioeconomic status for 'non-chocolate confectionary' and 'sugar, honey and jam' groups; with low maternal educational level for carbonated and 'soft drinks,' 'sugar, honey and jam,' 'cakes and pies' and 'breakfast cereals' groups; and with high paternal educational level for 'carbonated and soft drinks' and 'chocolates' group. The majority (94%) of studied adolescents consumed free sugars above 10% of daily energy intake. Our data indicate a broad variety in foods providing free sugars. Continued efforts are required at different levels to reduce the intake of free sugars, especially in families with a low educational level.

  17. Application of systems engineering: An acquisition agent perspective

    CSIR Research Space (South Africa)

    Niken, A

    2014-09-01

    Full Text Available This article covers a descriptive case study on the application of systems engineering and systems engineering management at Armscor. The report also covers the investigation into development methods used and the how the requirements changes...

  18. Application of systems engineering: An acquisition agent perspective

    CSIR Research Space (South Africa)

    Niken, A

    2014-10-01

    Full Text Available This article covers a descriptive case study on the application of systems engineering and systems engineering management at Armscor. The report also covers the investigation into development methods used and the how the requirements changes...

  19. Typology of engineering mathematics learners in a Singapore polytechnic: a socio-psychological perspective

    Science.gov (United States)

    Khiat, Henry

    2012-03-01

    This study aims to understand how engineering mathematics students form intentions in mathematics learning from a socio-psychological perspective. A grounded theory approach was adopted and 21 engineering students and six tutors participated in the study. The main findings in this study show that a student's intention in engineering mathematics learning is made up of a number of sequential components - their critical trigger, internalized significance, aim and perceived intention-related consequences in engineering mathematics learning. Accordingly, the participants may be broadly classified into five types of learners: idealistic learners, competitive learners, pragmatic learners, fatalistic learners and dissonant learners according to their intentions in engineering mathematics learning.

  20. An Exploratory Survey of Student Perspectives Regarding Search Engines

    Science.gov (United States)

    Alshare, Khaled; Miller, Don; Wenger, James

    2005-01-01

    This study explored college students' perceptions regarding their use of search engines. The main objective was to determine how frequently students used various search engines, whether advanced search features were used, and how many search engines were used. Various factors that might influence student responses were examined. Results showed…

  1. Australian Engineering Educators' Attitudes towards Aboriginal Cultures and Perspectives

    Science.gov (United States)

    Goldfinch, Thomas; Prpic, Juliana Kaya; Jolly, Lesley; Leigh, Elyssebeth; Kennedy, Jade

    2017-01-01

    In Australia, representation of Aboriginal populations within the engineering profession is very low despite participation targets set by Government departments, professional bodies and Universities. Progressing the Aboriginal inclusion agenda within Australian Engineering Education requires a clearer understanding of engineering educators'…

  2. Researching primary engineering education: UK perspectives, an exploratory study

    Science.gov (United States)

    Clark, Robin; Andrews, Jane

    2010-10-01

    This paper draws attention to the findings of an exploratory study that critically identified and analysed relevant perceptions of elementary level engineering education within the UK. Utilising an approach based upon grounded theory methodology, 30 participants including teachers, representatives of government bodies and non-profit providers of primary level engineering initiatives were interviewed. Three main concepts were identified during the analysis of findings, each relevant to primary engineering education. These were pedagogic issues, exposure to engineering within the curriculum and children's interest. The paper concludes that the opportunity to make a real difference to children's education by stimulating their engineering imagination suggests this subject area is of particular value.

  3. New Perspectives: Technology Teacher Education and Engineering Design

    OpenAIRE

    Hill, Roger B.

    2006-01-01

    Initiatives to integrate engineering design within the field of technology education are increasingly evident (Lewis, 2005; Wicklein, 2006). Alliances between technology education and engineering were prominent in the development of the Standards for Technological Literacy (International Technology Education Association, 2000), and leaders from both disciplines have expressed support for the outcomes described in the Standards (Bybee, 2000; Council of the National Academy of Engineering, 2000...

  4. Attracting Girls to Science, Engineering and Technology: An Australian Perspective

    Science.gov (United States)

    Little, Alison J.; Leon de la Barra, Bernardo A.

    2009-01-01

    This paper describes a project undertaken by the school outreach team at the School of Engineering, University of Tasmania, Australia, to attract girls to science, engineering and technology (SET). The project was a pilot program designed to engage female students from upper primary to senior secondary in the teaching of physical sciences. A…

  5. Dimethyl ether in diesel engines - progress and perspectives

    DEFF Research Database (Denmark)

    Sorenson, Spencer C

    2001-01-01

    A review of recent developments related to the use of dimethyl ether (DME) in engines is presented Research work discussed is in the areas of engine performance and emissions, fuel injection systems, spray and ignition delay, and detailed chemical kinetic modeling. DME's properties and safety...

  6. Sensor Based Engine Life Calculation: A Probabilistic Perspective

    Science.gov (United States)

    Guo, Ten-Huei; Chen, Philip

    2003-01-01

    It is generally known that an engine component will accumulate damage (life usage) during its lifetime of use in a harsh operating environment. The commonly used cycle count for engine component usage monitoring has an inherent range of uncertainty which can be overly costly or potentially less safe from an operational standpoint. With the advance of computer technology, engine operation modeling, and the understanding of damage accumulation physics, it is possible (and desirable) to use the available sensor information to make a more accurate assessment of engine component usage. This paper describes a probabilistic approach to quantify the effects of engine operating parameter uncertainties on the thermomechanical fatigue (TMF) life of a selected engine part. A closed-loop engine simulation with a TMF life model is used to calculate the life consumption of different mission cycles. A Monte Carlo simulation approach is used to generate the statistical life usage profile for different operating assumptions. The probabilities of failure of different operating conditions are compared to illustrate the importance of the engine component life calculation using sensor information. The results of this study clearly show that a sensor-based life cycle calculation can greatly reduce the risk of component failure as well as extend on-wing component life by avoiding unnecessary maintenance actions.

  7. Practicing Engineers' Perspective on Mathematics and Mathematics Education in College

    Science.gov (United States)

    Tosmur-Bayazit, Nermin; Ubuz, Behiye

    2013-01-01

    This paper reports on a qualitative study focusing on engineers' point of view in regard to university mathematics and mathematics education. An individual interview was conducted with three electrical and two mechanical engineers between the ages of 25-40, all engaged in successful careers. The subjects were requested to reflect upon themselves…

  8. Environmental education in Saudi general environment system - an engineering perspective

    International Nuclear Information System (INIS)

    Abdulrahman Salih Hariri

    2006-01-01

    The Saudi Cabinet of Ministers approved the Saudi General Environment System (SGES) in 2001. This approval is considered a step forward towards preserving the environment in Saudi Arabia. One of the targets of this system is to make environmental planning as an un-replaceable part of every comprehensive development planning in all industrial, agricultural, and architectural sectors. Achieving such a target requires a specialized labor force. Therefore, College of Engineering should act positively and actively in disseminating environmental awareness among engineers since they play a major rule in development projects. A degree in environmental engineering is a must at present, which is not available yet at any university in Saudi Arabia. Details of a B. Sc degree in environmental engineering offered by two universities in USA, are discussed. The syllabus of a degree in environment engineering adapted for the Saudi environment and culture is outlined

  9. A Paisagem na Obra de Helena Kolody e Miguel Bakun

    Directory of Open Access Journals (Sweden)

    Vanderlei Kroin

    2017-10-01

    Full Text Available Pretende-se neste trabalho analisar comparativamente duas telas e dois poemas dos artistas paranaenses Helena Kolody e Miguel Bakun, a fim de observar como ambos, por meio de versos e cores, linguagem verbal e visual apresentam a natureza. Para tanto, tal estudo valer-se-á fundamentalmente dos pressupostos construídos pelo teórico francês Michel Collot, em relação à filosofia da paisagem. Para melhor desenvolvimento do trabalho será observado como o teórico citado caracteriza e define a paisagem na construção poética e de como essa construção se estende concomitantemente à pintura, haja vista que as duas artes em questão têm muitas relações em comum, são tidas como artes irmãs, representam sob diferentes signos o homem e tudo que o cerca construindo imagens para o leitor.

  10. Perspectives on Oral Communication Skills for Engineers in Engineering Profession of Pakistan

    OpenAIRE

    Inayatullah Kakepoto; Noor Abidah Mohd Omar; Yusuf Boon; S M Zafar Iqbal

    2012-01-01

    Communication plays paramount role for engineers to perform workplace jobs effectively in this modern age of industrialization. The purpose of this research paper was to determine importance of oral communication for engineers at workplace. Thirty engineers from 2 engineering organizations participated in this study. Purposive sampling method was used for data collection since respondents were drawn on specific criteria of engineers with minimum 5 years work experience. Quantitative survey ba...

  11. Creating meaningful learning experiences: Understanding students' perspectives of engineering design

    Science.gov (United States)

    Aleong, Richard James Chung Mun

    There is a societal need for design education to prepare holistic engineers with the knowledge, skills, and attitudes to innovate and compete globally. Design skills are paramount to the espoused values of higher education, as institutions of higher learning strive to develop in students the cognitive abilities of critical thinking, problem solving, and creativity. To meet these interests from industry and academia, it is important to advance the teaching and learning of engineering design. This research aims to understand how engineering students learn and think about design, as a way for engineering educators to optimize instructional practice and curriculum development. Qualitative research methodology was used to investigate the meaning that engineering students' ascribe to engineering design. The recruitment of participants and corresponding collection of data occurred in two phases using two different data collection techniques. The first phase involved the distribution of a one-time online questionnaire to all first year, third year, and fourth year undergraduate engineering students at three Canadian Universities. After the questionnaire, students were asked if they would be willing to participate in the second phase of data collection consisting of a personal interview. A total of ten students participated in interviews. Qualitative data analysis procedures were conducted on students' responses from the questionnaire and interviews. The data analysis process consisted of two phases: a descriptive phase to code and categorize the data, followed by an interpretative phase to generate further meaning and relationships. The research findings present a conceptual understanding of students' descriptions about engineering design, structured within two educational orientations: a learning studies orientation and a curriculum studies orientation. The learning studies orientation captured three themes of students' understanding of engineering design: awareness

  12. A Comparative Analysis of Software Engineering with Mature Engineering Disciplines Using a Problem-Solving Perspective

    NARCIS (Netherlands)

    Tekinerdogan, B.; Aksit, Mehmet; Dogru, Ali H.; Bicer, Veli

    2011-01-01

    Software engineering is compared with traditional engineering disciplines using a domain specific problem-solving model called Problem-Solving for Engineering Model (PSEM). The comparative analysis is performed both from a historical and contemporary view. The historical view provides lessons on the

  13. ''Perspectives in nuclear technology'': recruiting young scientists and engineers

    International Nuclear Information System (INIS)

    Wasgindt, V.

    2003-01-01

    Securing competence in nuclear technology is a topic of great interest especially because the preservation and promotion of scientific and technical know-how in Germany are particularly important under conditions of an opt-out of the use of nuclear power. In the light of decreasing numbers of graduates from courses in nuclear science and technology, positive action is indicated. For the first time, the Deutsches Atomforum e.V., together with major partners in cooperation, therefore organized a colloquy last year on 'Perspectives in Nuclear Technology'. Young students of various disciplines were given an opportunity to obtain in-depth information about nuclear power as part of the entire field of energy supply by attending lectures, round-table discussions, and on-site events. Because of the positive response elicited by that first event, another 'Perspectives in Nuclear Technology' colloquy will be held in 2003. (orig.)

  14. Perspectives for Cell-homing Approaches to Engineer Dental Pulp.

    Science.gov (United States)

    Galler, Kerstin M; Widbiller, Matthias

    2017-09-01

    Sufficient proof is available today to demonstrate that dental pulp tissue engineering is possible. The body of evidence was generated mainly on cell transplantation; however, because of several severe problems afflicted with this approach, it might not be feasible for a clinical setting in the near future. More recently, cell homing has been proposed as a viable alternative. We suggest a modification of the tissue engineering paradigm, where resident cells are attracted by endogenous, dentin-derived growth factors that further induce cell proliferation and differentiation and a bioactive scaffold material laden with these growth factors that serves as a template for tissue formation. This article highlights the latest developments regarding scaffold materials, stem cells, and dentin-derived growth factors specifically for a cell-homing approach to engineer dental pulp and summarizes new ideas. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  15. O estado proprio de todo ser vivo: a liberdade em Helena Antipoff

    OpenAIRE

    Luciana Santoro Campanario

    1999-01-01

    A presente dissertação estuda a liberdade humana na obra da psicóloga e educadora russo-brasileira Helena Antipoff, uma das matrizes fundantes da psicologia e da educação brasileira. O conceito de liberdade em Helena Antipoff, estudado através da técnica qualitativa de análise de conteúdo dos documentos originais da autora, revelou-se, em uma leitura internalista historiográfica condensador de vários debates historiográficos externalistas sobre a relação indivíduo/sociedade na psicologia. Os ...

  16. Statutory Instrument No. 128, The Nuclear Installations (St. Helena) Order 1972

    International Nuclear Information System (INIS)

    1972-01-01

    This Order extends to St. Helena with the exceptions, adaptations and modifications specified in the Schedule to the Order, certain provisions of the Nuclear Installations Act 1965, as amended. It is the 1965 Act which implements the provisions of the Paris Convention and the Brussels Supplementary Convention in the United Kingdom. The provisions so extended impose a duty on the nuclear operator to secure that no nuclear occurrence taking place within the territorial limits of St. Helena causes nuclear injury or damage, and relate to the right to compensation for breach of that duty, the bringing and satisfaction of claims and other matters. (NEA) [fr

  17. Meninas, jovens e velhas: personagens tecidas na narrativa de Helena Parente Cunha

    OpenAIRE

    Lima, Lílian Almeida de Oliveira

    2014-01-01

    A tese Meninas, jovens e velhas: personagens tecidas na narrativa de Helena Parente Cunha assenta-se sobre os estudos acerca das relações entre literatura, mulher e relações de gênero. Na tese, propõe-se a analisar as personagens femininas presentes na obra ficcional da escritora brasileira Helena Parente Cunha, composta pelos seguintes títulos: Os provisórios (1980), Mulher no espelho (1983), Cem mentiras de verdade (1985), As doze cores do vermelho (1989), A casa e as casas (1996), Vento, v...

  18. Maria Helena Rosas Fernandes : catálogo comentado da obra completa e fases composicionais

    OpenAIRE

    Juliana Delborgo Abra Olivato

    2016-01-01

    Resumo: Este trabalho se propôs a elaborar um catálogo comentado da obra musical completa de Maria Helena Rosas Fernandes (1933), bem como definir fases e características em sua trajetória como compositora. Maria Helena tem seu trabalho reconhecido por meio de premiações recebidas, além de obras publicadas, gravadas e executadas tanto no Brasil quanto no exterior. Buscamos preencher uma lacuna de estudo sobre tal obra musical com uma metodologia que se apoiou sobre dois objetos de pesquisa, a...

  19. Success of Student Internship in Engineering Industry: A Faculty Perspective

    Science.gov (United States)

    Prabhu, B. Vittaldasa; Kudva S., Aditya

    2016-01-01

    Student internship plays a major role in transforming the engineering interns to ready-to-use professionals. Learning at the workplace has become a challenge for the interns due to several issues. A knowledge gap analysis has been depicted considering all stakeholders of the internship, including the intern, faculty, institution and the industrial…

  20. Enhancing Individual Employability: The Perspective of Engineering Graduates

    Science.gov (United States)

    Nilsson, Staffan

    2010-01-01

    Purpose: Employability includes the ability to find employment and remain employed. Employability includes both hard and soft skills, including formal and actual competence, interpersonal skills, and personal characteristics. This paper aims to focus on illuminating perceptions engineering graduates have regarding employability. More specifically,…

  1. Mathematical Education of Engineers--A Future Perspective.

    Science.gov (United States)

    Bajpai, A. C.; James, D. J. G.

    1985-01-01

    Topics and issues related to the mathematics education of engineers are discussed. Major areas addressed include industrial requirements; influences on the mathematics curriculum; and problems related to implementing recommendations made concerning changes in the mathematics curriculum. Indicates that a reappraisal of the position of mathematics…

  2. Development of Implantable Medical Devices: From an Engineering Perspective

    Science.gov (United States)

    2013-01-01

    From the first pacemaker implant in 1958, numerous engineering and medical activities for implantable medical device development have faced challenges in materials, battery power, functionality, electrical power consumption, size shrinkage, system delivery, and wireless communication. With explosive advances in scientific and engineering technology, many implantable medical devices such as the pacemaker, cochlear implant, and real-time blood pressure sensors have been developed and improved. This trend of progress in medical devices will continue because of the coming super-aged society, which will result in more consumers for the devices. The inner body is a special space filled with electrical, chemical, mechanical, and marine-salted reactions. Therefore, electrical connectivity and communication, corrosion, robustness, and hermeticity are key factors to be considered during the development stage. The main participants in the development stage are the user, the medical staff, and the engineer or technician. Thus, there are three different viewpoints in the development of implantable devices. In this review paper, considerations in the development of implantable medical devices will be presented from the viewpoint of an engineering mind. PMID:24143287

  3. Tailings dams from the perspective of conventional dam engineering

    International Nuclear Information System (INIS)

    Szymanski, M.B.

    1999-01-01

    A guideline intended for conventional dams such as hydroelectric, water supply, flood control, or irrigation is used sometimes for evaluating the safety of a tailings dam. Differences between tailings dams and conventional dams are often substantial and, as such, should not be overlooked when applying the techniques or safety requirements of conventional dam engineering to tailings dams. Having a dam safety evaluation program developed specifically for tailings dams is essential, if only to reduce the chance of potential errors or omissions that might occur when relying on conventional dam engineering practice. This is not to deny the merits of using the Canadian Dam Safety Association Guidelines (CDSA) and similar conventional dam guidelines for evaluating the safety of tailings dams. Rather it is intended as a warning, and as a rationale underlying basic requirement of tailings dam emgineering: specific experience in tailings dams is essential when applying conventional dam engineering practice. A discussion is included that focuses on the more remarkable tailings dam safety practics. It is not addressed to a technical publications intended for such dams, or significantly different so that the use of conventional dam engineering practice would not be appropriate. The CDSA Guidelines were recently revised to include tailings dams. But incorporating tailings dams into the 1999 revision of the CDSA Guidelines is a first step only - further revision is necessary with respect to tailings dams. 11 refs., 2 tabs

  4. Embedded and real time system development a software engineering perspective concepts, methods and principles

    CERN Document Server

    Saeed, Saqib; Darwish, Ashraf; Abraham, Ajith

    2014-01-01

    Nowadays embedded and real-time systems contain complex software. The complexity of embedded systems is increasing, and the amount and variety of software in the embedded products are growing. This creates a big challenge for embedded and real-time software development processes and there is a need to develop separate metrics and benchmarks. “Embedded and Real Time System Development: A Software Engineering Perspective: Concepts, Methods and Principles” presents practical as well as conceptual knowledge of the latest tools, techniques and methodologies of embedded software engineering and real-time systems. Each chapter includes an in-depth investigation regarding the actual or potential role of software engineering tools in the context of the embedded system and real-time system. The book presents state-of-the art and future perspectives with industry experts, researchers, and academicians sharing ideas and experiences including surrounding frontier technologies, breakthroughs, innovative solutions and...

  5. Analyzing the competences of production engineering graduates: an industry perspective

    Directory of Open Access Journals (Sweden)

    Patrícia Fernanda dos Santos

    2017-11-01

    Full Text Available Abstract This paper aims at conducting an analysis the competences of production engineering graduates, building on an industry view. To this end, we conducted a survey addressing 103 medium and large companies within the Brazilian manufacturing industry. The results suggest that companies do recognize the importance of competences. Some gaps in the competences of graduates were also pointed out by respondents. This study suggests the need for the development of efforts for providing the production engineer with a better professional background. The links between university and industry are likely to contribute towards such direction, notably as a starting point for institutions and industries to foster their student’s competences, aiming their aptitude for an ever-competitive job market, which values the flexible, creative being, who is capable of creating innovative solutions.

  6. A Chemical Engineering Perspective on the Origins of Life

    Directory of Open Access Journals (Sweden)

    Martha A. Grover

    2015-05-01

    Full Text Available Atoms and molecules assemble into materials, with the material structure determining the properties and ultimate function. Human-made materials and systems have achieved great complexity, such as the integrated circuit and the modern airplane. However, they still do not rival the adaptivity and robustness of biological systems. Understanding the reaction and assembly of molecules on the early Earth is a scientific grand challenge, and also can elucidate the design principles underlying biological materials and systems. This research requires understanding of chemical reactions, thermodynamics, fluid mechanics, heat and mass transfer, optimization, and control. Thus, the discipline of chemical engineering can play a central role in advancing the field. In this paper, an overview of research in the origins field is given, with particular emphasis on the origin of biopolymers and the role of chemical engineering phenomena. A case study is presented to highlight the importance of the environment and its coupling to the chemistry.

  7. Social Engineering Attacks on Government Opponents: Target Perspectives

    Directory of Open Access Journals (Sweden)

    Marczak William R.

    2017-04-01

    Full Text Available New methods of dissident surveillance employed by repressive nation-states increasingly involve socially engineering targets into unwitting cooperation (e.g., by convincing them to open a malicious attachment or link. While a fair amount is understood about the nature of these threat actors and the types of tools they use, there is comparatively little understood about targets’ perceptions of the risks associated with their online activity, and their security posture. We conducted in-depth interviews of 30 potential targets of Middle Eastern and Horn of Africa-based governments, also examining settings and software on their computers and phones. Our engagement illuminates the ways that likely targets are vulnerable to the types of social engineering employed by nation-states.

  8. Perspectives of Stirling engines use for distributed generation in Brazil

    International Nuclear Information System (INIS)

    Corria, Maria Eugenia; Cobas, Vladimir Melian; Silva Lora, Electo

    2006-01-01

    This work presents an evaluation of the development of Stirling engines and the advantages and the main obstacles against their widespread introduction in energy-generation practices. It also shows how the economic, technical and environmental characteristics presented by these engines support their insertion in the energy sector. An economic and environmental evaluation of this technology aiming at introducing it in the Brazilian energy scenario is also presented. Changes in legislation, financing and technology within the next few years must encourage the implementation of alternative generation technologies that present lower environmental impacts. Also, tendencies and economical studies are presented, trying to find the optimal condition for this technology to be feasible. The option regarding the trading of carbon credits when biomass is used as fuel is analyzed as well

  9. Research perspectives in hydraulics and water resources engineering

    National Research Council Canada - National Science Library

    Rama Prasad, Indian Institute of Science, Bangalore; Vedula, S

    2002-01-01

    ... were taken up. The Section grew into a full fledged department, which was rechristened as the Department of Civil Engineering in 1972. In recognition of the excellence in its performance, the Department has been designated as a Centre for Advanced Studies by the University Grants Commission. The Department celebrated the Golden Jubilee during the year July 2000-July 2001 with a variety of academic activities including special lectures, workshops and an international conference. As part of the cele...

  10. Perspective of Micro Process Engineering for Thermal Food Treatment.

    Science.gov (United States)

    Mathys, Alexander

    2018-01-01

    Micro process engineering as a process synthesis and intensification tool enables an ultra-short thermal treatment of foods within milliseconds (ms) using very high surface-area-to-volume ratios. The innovative application of ultra-short pasteurization and sterilization at high temperatures, but with holding times within the range of ms would allow the preservation of liquid foods with higher qualities, thereby avoiding many unwanted reactions with different temperature-time characteristics. Process challenges, such as fouling, clogging, and potential temperature gradients during such conditions need to be assessed on a case by case basis and optimized accordingly. Owing to the modularity, flexibility, and continuous operation of micro process engineering, thermal processes from the lab to the pilot and industrial scales can be more effectively upscaled. A case study on thermal inactivation demonstrated the feasibility of transferring lab results to the pilot scale. It was shown that micro process engineering applications in thermal food treatment may be relevant to both research and industrial operations. Scaling of micro structured devices is made possible through the use of numbering-up approaches; however, reduced investment costs and a hygienic design must be assured.

  11. Emerging Perspectives in Scaffold for Tissue Engineering in Oral Surgery

    Directory of Open Access Journals (Sweden)

    Gabriele Ceccarelli

    2017-01-01

    Full Text Available Bone regeneration is currently one of the most important and challenging tissue engineering approaches in regenerative medicine. Bone regeneration is a promising approach in dentistry and is considered an ideal clinical strategy in treating diseases, injuries, and defects of the maxillofacial region. Advances in tissue engineering have resulted in the development of innovative scaffold designs, complemented by the progress made in cell-based therapies. In vitro bone regeneration can be achieved by the combination of stem cells, scaffolds, and bioactive factors. The biomimetic approach to create an ideal bone substitute provides strategies for developing combined scaffolds composed of adult stem cells with mesenchymal phenotype and different organic biomaterials (such as collagen and hyaluronic acid derivatives or inorganic biomaterials such as manufactured polymers (polyglycolic acid (PGA, polylactic acid (PLA, and polycaprolactone. This review focuses on different biomaterials currently used in dentistry as scaffolds for bone regeneration in treating bone defects or in surgical techniques, such as sinus lift, horizontal and vertical bone grafts, or socket preservation. Our review would be of particular interest to medical and surgical researchers at the interface of cell biology, materials science, and tissue engineering, as well as industry-related manufacturers and researchers in healthcare, prosthetics, and 3D printing, too.

  12. Perspectives on Oral Communication Skills for Engineers in Engineering Profession of Pakistan

    Directory of Open Access Journals (Sweden)

    Inayatullah Kakepoto

    2012-09-01

    Full Text Available Communication plays paramount role for engineers to perform workplace jobs effectively in this modern age of industrialization. The purpose of this research paper was to determine importance of oral communication for engineers at workplace. Thirty engineers from 2 engineering organizations participated in this study. Purposive sampling method was used for data collection since respondents were drawn on specific criteria of engineers with minimum 5 years work experience. Quantitative survey based on questionnaire survey was used for data collection purpose. Data were analyzed using Statistical Package for Social Sciences (SPSS 15.0. The results of the study indicated that oral communication skills such as oral presentation, participation in meetings, conversation, discussion, and negotiation skill play significant role for engineers at workplace. Thus, quantitative data analysis results indicate that oral communication skills play significant role for engineers to perform workplace jobs efficiently in this competitive work environment of organizations. However, the results of this study are consistent with other literature review findings on importance of oral communication skills for engineers at workplace.

  13. Perspectives and Plans for Graduate Studies. 11, Engineering 1974-75; F. Civil Engineering.

    Science.gov (United States)

    Ontario Council on Graduate Studies, Toronto. Advisory Committee on Academic Planning.

    A series of studies carried out by the Advisory Committee on Academic Planning (ACAP) published by the Council of Ontario Universities (COU) dealt with a planning study of doctoral work in engineering that was conducted in several parts corresponding to the various disciplines within engineering. This document, which is one part of that study,…

  14. MEE (Materials Engineering for Electronics - Aim, Tools and Perspectives

    Directory of Open Access Journals (Sweden)

    J. Kousal

    2000-01-01

    Full Text Available New approach to solidification processes based on a combination  of mechanical vibrations and on specially introduced magneto-hydrodynamic forces is illustrated on GaSb grown from Ga and Sb solutions. Process is accelerated approximately 20-times compared with "classical" Travelling heater method - solution growth. Up to now, though ingots possess mosaic texture, their transport properties: μH = 3.800 cm2/Vs, p = 1.7 . 1017 at 77 K are slightly better than published results. A schematic arrangement of the growth apparatus for a modified travelling heater method, and of the growth conditions are given. A simple calculation of levitation phenomenon being generated by a controlled MHD forces are presented. There is brought a brief analyses of this phenomenon for an application on the above mentioned processes. Some experimentation attempts are added. Possible perspectives inhering in this peculiar process can also inspire young investigators/scientists.

  15. Engineering Job Skills in Croatian Economy: Employers’ Perspective

    Directory of Open Access Journals (Sweden)

    Nikša Dubreta

    2018-03-01

    Full Text Available Different actors, or stakeholders, are interested and want to participate in discussions and interventions related to the topic of skills as an important outcome of engineering education. In the Croatian context, the entire process is still predominantly internally driven and determined by academic evaluations while the involvement of the alumni and employers as external stakeholders is sporadic and under researched. Since Croatian employers are not sufficiently familiar with the levels and structures of reformed study programs, the main objective of this research was to assess to what extent the current and largely accepted set of engineering skills fit their expectations. By reviewing available literature, 36 key skills were identified and used in a questionnaire administrated to Croatian employers, resulting in 418 completed and usable responses. Results show that employers find every assessed skill as somewhat/extremely valuable. However, it is found that employers most valued skills related to the wider set of transferable skills with somewhat greater emphases on skills that reflect professionalism and work ethic. In general, it turned out that employers approach transferable skills in terms of their functionality. Mean comparison within subgroups has shown statistically significant differences with regard to respondent’s gender. In general, women fit the theorized dimensions more than their male counterparts, perhaps indicating that they understand all skills, and transferable skills in particular, more holistically than men. Finally, in order to understand the underlying structure of the explored items, exploratory factor analysis was employed, resulting in 8 clear dimensions suggesting engineering “employability skills” in the Croatian context.

  16. STUDY OF TRENDS AND PERSPECTIVES OF INDUSTRIAL ENGINEERING RESEARCH

    Directory of Open Access Journals (Sweden)

    H. Dastkhan

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Industrial engineering is an engineering discipline which, because of its multi-disciplinary nature, has played an important role in the development and optimization of different systems at macro and micro levels. In this paper, the results of a research to study the position and trend of Industrial Engineering research in recent years are described. The data from a sample of 7 114 IE-related articles from international journals during the last 27 years were used for the analysis. The results showed that the development of IE in many countries has a strong correlation with their industrial and economic development. However, IE research topics are spreading in other management and engineering departments and so there is a need to redefine the discipline and its specific areas of interest. According to the prediction made using time series analysis, the most favorite fields of IE research in future will be on subjects related to information technology, intelligent systems, optimization, quality, and supply chain management.

    AFRIKAANSE OPSOMMING: Bedryfsingenieurswese is 'n ingenieursdissipline wat vanweë die multi-dissiplinêre aard daarvan 'n belangrike rol gespeel het in die optimisering van verskillende sisteme op makroen mikrovlak. Hierdie artikel hou die resultate voor van 'n navorsingsprojek wat onderneem is om die posisie en rigting van Bedryfsingenieursnavorsing in onlangse jare te bepaal. Die data van 'n monster van 7 114 Bedryfsingenieursverwante artikels wat verskyn het in internasionale joernale oor die afgelope 27 jaar is gebruik vir die ontleding. Die resultate toon dat die groei van Bedryfsingenieurswese in verskeie lande sterk korreleer met industriële en ekonomiese ontwikkeling. Tog blyk dit dat die navorsingsonderwerpe van Bedryfsingenieurswese sprei na ander bestuurs- en ingenieursdepartemente en dus bestaan daar ‘n nodigheid om die dissipline en die spesifieke belangstellingsvelde te herdefinieer

  17. A Perspective on Bionanosensor Simulation & Computational Enzyme Engineering

    DEFF Research Database (Denmark)

    Hediger, Martin Robert

    helps in optimizing such sensors. In the second project, Computational Enzyme Engineering, a method is developed which can be used to calculate the reaction barrier of a large number of enzyme mutants. First technical details are discussed, then we compare to experiments from Novozymes A/S and show how...... accurate the method is. Finally we use the method to calcualte the rate-limiting step in the reaction profile of around 400 mutants of an enzyme. This is the first time that the barrier of the rate-determining step is alculated in as set of mutants of this size, consisting of the full enzyme structure...

  18. The influence of topography on tissue engineering perspective

    Energy Technology Data Exchange (ETDEWEB)

    Mansouri, Negar [Department of Biomedical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur (Malaysia); SamiraBagheri, E-mail: samira_bagheri@edu.um.my [Nanotechnology & Catalysis Research Centre (NANOCAT), IPS Building, University of Malaya, 50603 Kuala Lumpur (Malaysia)

    2016-04-01

    The actual in vivo tissue scaffold offers a three-dimensional (3D) structural support along with a nano-textured surfaces consist of a fibrous network in order to deliver cell adhesion and signaling. A scaffold is required, until the tissue is entirely regenerated or restored, to act as a temporary ingrowth template for cell proliferation and extracellular matrix (ECM) deposition. This review depicts some of the most significant three dimensional structure materials used as scaffolds in various tissue engineering application fields currently being employed to mimic in vivo features. Accordingly, some of the researchers' attempts have envisioned utilizing graphene for the fabrication of porous and flexible 3D scaffolds. The main focus of this paper is to evaluate the topographical and topological optimization of scaffolds for tissue engineering applications in order to improve scaffolds' mechanical performances. - Highlights: • The in vivo tissue scaffold offers a three-dimensional structural support. • Graphene can be used for fabrication of porous and flexible 3D scaffold. • Topological optimization improves scaffolds' mechanical performances.

  19. Revisiting classical design in engineering from a perspective of frugality

    Directory of Open Access Journals (Sweden)

    Balkrishna C. Rao

    2017-05-01

    Full Text Available The conservative nature of design in engineering has typically unleashed products fabricated with generous amounts of raw materials. This is epitomized by the factor of safety whose values higher than unity suggests various uncertainties of design that are tackled through material padding. This effort proposes a new factor of safety called the factor of frugality that could be used in ecodesign and which addresses both rigors of the classical design process and quantification of savings in materials going into a product. An example of frugal shaft design together with some other cases has been presented to explain the working of the factor of frugality. Adoption of the frugality factor would entail a change in design philosophy whereby designers would constantly make avail of a rigorous design process coupled with material-saving schemes for realizing products that are benign to the environment. Such a change in the foundations of design would abet the stewardship of earth in avoiding planetary boundaries since engineering influences a significant proportion of human endeavors.

  20. Building technology entrepreneurship capabilities, an engineering education perspective

    DEFF Research Database (Denmark)

    Kleine, Kari; Giones, Ferran; Tegtmeier, Silke

    to respond to the divergence between the new demands imposed by the societal challenges and the existing science and technology development focus of universities is to transform the educational programs being offered. Instead of aiming to transform consolidated structures through directed interventions...... of the regular course activities. The development of attitudes towards entrepreneurial behavior is also activated through internal projects. For instance, as part of a master program, engineering students enroll in a business venturing course (the course receives different names in each institution), where......Much has been discussed on the changing role of universities in society, in particular when examining the contribution of universities in the economic growth and societal development (Audretsch 2012). The transition from universities as research centers to universities as innovation drivers has...

  1. Developing an interactive intervention planner: a systems engineering perspective

    CERN Document Server

    Fabry, Thomas; Feral, Bruno; Braesch, Christian

    2013-01-01

    Intervention planning is crucial for maintenance operations in particle accelerator environments with ionizing radiation, during which the radiation dose received by maintenance workers should be reduced to a minimum. In this context, we discuss the development of a new software tool and the entailed methodology, including the visualization aspects. The software tool integrates interactive exploration of a scene depicting an accelerator facility augmented with residual radiation level simulations, with the visualization of intervention data such as the followed trajectory and maintenance tasks. Its conception allows for future inclusion of measurements performed by mobile robotic devices. In this work, we explore the systems engineering life cycle of the development process of an interactive intervention planner, which includes the needs analysis, specification explicitation, conceptual mathematical modelling, iterative implementation, design and prototype testing and usability testing.

  2. Developing an Interactive Intervention Planner - A Systems Engineering Perspective

    Directory of Open Access Journals (Sweden)

    Thomas Fabry

    2013-09-01

    Full Text Available Intervention planning is crucial for maintenance operations in particle accelerator environments with ionizing radiation, during which the radiation dose received by maintenance workers should be reduced to a minimum. In this context, we discuss the development of a new software tool and the entailed methodology, including the visualization aspects. The software tool integrates interactive exploration of a scene depicting an accelerator facility augmented with residual radiation level simulations, with the visualization of intervention data such as the followed trajectory and maintenance tasks. Its conception allows for future inclusion of measurements performed by mobile robotic devices. In this work, we explore the systems engineering life cycle of the development process of an interactive intervention planner, which includes the needs analysis, specification explicitation, conceptual mathematical modelling, iterative implementation, design and prototype testing and usability testing.

  3. Engineering of microorganisms for the production of biofuels and perspectives based on systems metabolic engineering approaches.

    Science.gov (United States)

    Jang, Yu-Sin; Park, Jong Myoung; Choi, Sol; Choi, Yong Jun; Seung, Do Young; Cho, Jung Hee; Lee, Sang Yup

    2012-01-01

    The increasing oil price and environmental concerns caused by the use of fossil fuel have renewed our interest in utilizing biomass as a sustainable resource for the production of biofuel. It is however essential to develop high performance microbes that are capable of producing biofuels with very high efficiency in order to compete with the fossil fuel. Recently, the strategies for developing microbial strains by systems metabolic engineering, which can be considered as metabolic engineering integrated with systems biology and synthetic biology, have been developed. Systems metabolic engineering allows successful development of microbes that are capable of producing several different biofuels including bioethanol, biobutanol, alkane, and biodiesel, and even hydrogen. In this review, the approaches employed to develop efficient biofuel producers by metabolic engineering and systems metabolic engineering approaches are reviewed with relevant example cases. It is expected that systems metabolic engineering will be employed as an essential strategy for the development of microbial strains for industrial applications. Copyright © 2011 Elsevier Inc. All rights reserved.

  4. Biosensors for Sustainable Food Engineering: Challenges and Perspectives

    Directory of Open Access Journals (Sweden)

    Suresh Neethirajan

    2018-03-01

    Full Text Available Current food production faces tremendous challenges from growing human population, maintaining clean resources and food qualities, and protecting climate and environment. Food sustainability is mostly a cooperative effort resulting in technology development supported by both governments and enterprises. Multiple attempts have been promoted in tackling challenges and enhancing drivers in food production. Biosensors and biosensing technologies with their applications, are being widely applied to tackling top challenges in food production and its sustainability. Consequently, a growing demand in biosensing technologies exists in food sustainability. Microfluidics represents a technological system integrating multiple technologies. Nanomaterials, with its technology in biosensing, is thought to be the most promising tool in dealing with health, energy, and environmental issues closely related to world populations. The demand of point of care (POC technologies in this area focus on rapid, simple, accurate, portable, and low-cost analytical instruments. This review provides current viewpoints from the literature on biosensing in food production, food processing, safety and security, food packaging and supply chain, food waste processing, food quality assurance, and food engineering. The current understanding of progress, solution, and future challenges, as well as the commercialization of biosensors are summarized.

  5. Regulatory perspective on lower bound earthquakes - engineer's viewpoint

    International Nuclear Information System (INIS)

    Anderson, N.R.; Chokshi, N.C.

    1987-01-01

    Several recently recorded earthquakes, mostly, but not exclusively, in the eastern U.S. exhibit sharply different characteristics than those exhibited by Regulatory Guide 1.60 spectra and associated time-histories. These events are relatively small in magnitude, characterized by a relatively narrow-band spectra, and have significant high frequency content. Although no structural damage associated with the small magnitude high frequency events has been experienced, the regulatory staff faces two questions with regard to these events: (1) Is the operability of equipment in nuclear power plants affected by high frequency earthquakes and should the design of nuclear power plants explicitly consider such events? and (2) Should an operating plant be shut down because of exceedance of the design spectra at some high frequencies when such an event occurs? In this paper, an attempt is made to outline possible regulatory responses to these questions and identify issues which need further examination from an engineering point of view. Discussion in this paper deals with issues stemming from consideration of small magnitude high frequency events characterized by narrow-band spectra with low energy content at frequencies less than 10 Hz to 15 Hz

  6. Biosensors for Sustainable Food Engineering: Challenges and Perspectives.

    Science.gov (United States)

    Neethirajan, Suresh; Ragavan, Vasanth; Weng, Xuan; Chand, Rohit

    2018-03-12

    Current food production faces tremendous challenges from growing human population, maintaining clean resources and food qualities, and protecting climate and environment. Food sustainability is mostly a cooperative effort resulting in technology development supported by both governments and enterprises. Multiple attempts have been promoted in tackling challenges and enhancing drivers in food production. Biosensors and biosensing technologies with their applications, are being widely applied to tackling top challenges in food production and its sustainability. Consequently, a growing demand in biosensing technologies exists in food sustainability. Microfluidics represents a technological system integrating multiple technologies. Nanomaterials, with its technology in biosensing, is thought to be the most promising tool in dealing with health, energy, and environmental issues closely related to world populations. The demand of point of care (POC) technologies in this area focus on rapid, simple, accurate, portable, and low-cost analytical instruments. This review provides current viewpoints from the literature on biosensing in food production, food processing, safety and security, food packaging and supply chain, food waste processing, food quality assurance, and food engineering. The current understanding of progress, solution, and future challenges, as well as the commercialization of biosensors are summarized.

  7. Imaging Chronic Traumatic Encephalopathy: A Biomedical Engineering Perspective.

    Science.gov (United States)

    Polak, Paul; Tuyl, John Van; Engel, Robin

    2016-01-01

    A disease initially associated with boxers ninety years ago, chronic traumatic encephalopathy (CTE) is now recognized as a significant risk to boxers, American football players, ice hockey players, military personnel or anyone to whom recurrent head injuries are a distinct possibility. Diagnosis is currently confirmed at autopsy, although CTE's presumed sufferers have symptoms of depression, suicidal thoughts, mood and personality changes, and loss of memory. CTE sufferers also complain of losing cognitive ability, dysfunction in everyday activities, inability to keep regular employment, violent tendencies and marital strife. Dementia may develop over the long term. Unfortunately, there is no clear consensus in regards to pathology, with both number and severity of head injuries being linked to disease progression. Despite the slow advancement of this disease, there are no clinical methods to diagnose or monitor prognosis in presumed patients, limiting clinicians' efforts to symptom management. The lack of diagnostic tools fuels the need for biomedical engineers to develop techniques for in vivo detection of CTE. This review examines efforts made with various magnetic resonance and nuclear imaging techniques, with a view towards improving the sensitivity and specificity of diagnostic imaging for CTE.

  8. Biosensors for Sustainable Food Engineering: Challenges and Perspectives

    Science.gov (United States)

    Ragavan, Vasanth; Weng, Xuan; Chand, Rohit

    2018-01-01

    Current food production faces tremendous challenges from growing human population, maintaining clean resources and food qualities, and protecting climate and environment. Food sustainability is mostly a cooperative effort resulting in technology development supported by both governments and enterprises. Multiple attempts have been promoted in tackling challenges and enhancing drivers in food production. Biosensors and biosensing technologies with their applications, are being widely applied to tackling top challenges in food production and its sustainability. Consequently, a growing demand in biosensing technologies exists in food sustainability. Microfluidics represents a technological system integrating multiple technologies. Nanomaterials, with its technology in biosensing, is thought to be the most promising tool in dealing with health, energy, and environmental issues closely related to world populations. The demand of point of care (POC) technologies in this area focus on rapid, simple, accurate, portable, and low-cost analytical instruments. This review provides current viewpoints from the literature on biosensing in food production, food processing, safety and security, food packaging and supply chain, food waste processing, food quality assurance, and food engineering. The current understanding of progress, solution, and future challenges, as well as the commercialization of biosensors are summarized. PMID:29534552

  9. Toward Resolving the Outflow Engine: An Observational Perspective

    Science.gov (United States)

    Ray, T.; Dougados, C.; Bacciotti, F.; Eislöffel, J.; Chrysostomou, A.

    Jets from young stars represent one of the most striking signposts of star formation. The phenomenon has been researched for over two decades and there is now general agreement that such jets are generated as a byproduct of accretion, most likely by the accretion disk itself. Thus they mimic what occurs in more exotic objects such as active galactic nuclei and microquasars. The precise mechanism for their production, however, remains a mystery. To a large degree, progress is hampered observationally by the embedded nature of many jet sources as well as a lack of spatial resolution: Crude estimates, as well as more sophisticated models, nevertheless suggest that jets are accelerated and focused on scales of a few AU at most. It is only in the past few years, however, that we have begun to probe such scales in detail using classical T Tauri stars as touchstones. Application of adaptive optics, data provided by the HST, use of specialized techniques such as spectroastrometry, and the development of spectral diagnostic tools are beginning to reveal conditions in the jet launch zone. This has helped enormously to constrain models. Further improvements in the quality of the observational data are expected when the new generation of interferometers come on line. Here we review some of the most dramatic findings in this area since Protostars and Planets IV, including indications for jet rotation, i.e., that they transport angular momentum. We will also show how measurements such as those of width and the velocity field close to the source suggest jets are initially launched as warm magnetocentrifugal disk winds. Finally, the power of the spectroastrometric technique, as a probe of the central engine in very-low-mass stars and brown dwarfs, is shown by revealing the presence of a collimated outflow from a brown dwarf for the first time, copying what occurs on a larger scale in T Tauri stars.

  10. Engineering Education: Environmental and Chemical Engineering or Technology Curricula--A European Perspective

    Science.gov (United States)

    Glavic, Peter; Lukman, Rebeka; Lozano, Rodrigo

    2009-01-01

    Over recent years, universities have been incorporating sustainable development (SD) into their systems, including their curricula. This article analyses the incorporation of SD into the curricula of chemical and environmental engineering or technology bachelor degrees at universities in the European Union (EU) and European Free Trade Association…

  11. Reverse engineering and identification in systems biology: strategies, perspectives and challenges.

    Science.gov (United States)

    Villaverde, Alejandro F; Banga, Julio R

    2014-02-06

    The interplay of mathematical modelling with experiments is one of the central elements in systems biology. The aim of reverse engineering is to infer, analyse and understand, through this interplay, the functional and regulatory mechanisms of biological systems. Reverse engineering is not exclusive of systems biology and has been studied in different areas, such as inverse problem theory, machine learning, nonlinear physics, (bio)chemical kinetics, control theory and optimization, among others. However, it seems that many of these areas have been relatively closed to outsiders. In this contribution, we aim to compare and highlight the different perspectives and contributions from these fields, with emphasis on two key questions: (i) why are reverse engineering problems so hard to solve, and (ii) what methods are available for the particular problems arising from systems biology?

  12. Kuwaiti engineers' perspectives of the engineering senior design (Capstone) course as related to their professional experiences

    Science.gov (United States)

    Alsagheer, Abdullah

    This study looks into transfer of learning and its application in the actual employment of engineering students after graduation. At Kuwait University, a capstone course is being offered that aims to ensure that students amalgamate all kinds of engineering skills to apply to their work. Within a basic interpretive, qualitative study-design methodology, I interviewed 12 engineers who have recently experienced the senior design course at Kuwait University and are presently working in industry. From the analysis, four basic themes emerged that further delineate the focus of the entire study. The themes are 1) need for the capstone course, 2) applicability of and problems with the capstone course, 3) industry problems with training, and 4) students' attitudes toward the capstone course. The study concludes that participants are not transferring engineering skills; rather, they are transferring all types of instructions they have been given during their course of study at the university. A frequent statement is that the capstone course should be improved and specifically that it is necessary to improve upon the timing, schedule, teachers' behavior, contents, and format. The study concludes that Kuwaiti engineers on the whole face problems with time management and management support. The study includes some implications for Kuwait University and recommendations that can provide significant support for the development of the Senior Design (Capstone) Course. For examples: the project must be divided into phases to ensure timely completion of deliverables. In order to motivate students for hard work and to achieve true transfer of learning, Kuwait University is required to communicate with certain organizations to place its students at their research centers for capstone projects. All universities, including Kuwait University, should hire faculty specifically to run the capstone course. In conclusion, the study includes some suggestions for further research studies focused

  13. A vida privada de Helena de Tróia nos loucos anos 20 em Hollywood

    Directory of Open Access Journals (Sweden)

    Maria Cecília Coelho

    2013-12-01

    Full Text Available O objetivo deste artigo é analisar o filme de Alexander Korda, de 1927, The Private Life of Helen of Troy, baseado no romance homônimo de John Erskine, de 1925, e na peça The Road to Rome, de 1927, de Robert Sherwood, obras que fazem, respectivamente, uma releitura do mito de Helena e do episódio da chegada de Hannibal a Roma. Do filme, temos apenas alguns fragmentos, arquivados no British Film Institute, além de algumas fotos e reportagens de época. Por meio desse material, em um estudo comparativo, discutirei aspectos da recepção do mito de Helena na década de 20 nos Estados Unidos.

  14. Deciding 'what to teach' health professionals: a human-centred systems engineering perspective.

    Science.gov (United States)

    Cianciolo, Anna T

    2014-12-01

    Recent calls propose the conceptualisation of medical education research as 'an improvement science for complex social interventions'. This involves developing principled, yet contextually grounded, descriptions of health care practice that increase the likelihood of successful intervention. Defining what health professionals should be taught using theoretical perspectives and analytical techniques borrowed from human-centred systems engineering (HCSE) may acknowledge this call by allowing learning objectives and performance assessment criteria to be aligned with the demands of actual work. Human-centred systems engineering is a multidisciplinary endeavour that seeks to promote the safe, efficient and productive performance of socio-technological systems. Systems theories in HCSE explain how environmental conditions constrain and afford human goal-directed behaviour and are modified by such. Many of the techniques used in HCSE research that are applicable to examining health care practice should be familiar to medical education researchers. This method differs from other empirical approaches that have been applied to the study of health care practice in its emphasis on practical problem solving via intervention design. Learning objectives and performance assessment criteria derived from an HCSE perspective target people's attunement to environmental conditions as they strive to enact goal-directed behaviour. Implementing educational interventions from an HCSE perspective should facilitate a sustained positive impact across contexts because theories of person-environment interaction enable principled adaptations of interventions to local circumstances. © 2014 John Wiley & Sons Ltd.

  15. Teaching and training for global engineering perspectives on culture and professional communication practices

    CERN Document Server

    Flammia, Madelyn

    2016-01-01

    Provides a foundation for understanding a range of linguistic, cultural, and technological factors to effectively practice international communication in a variety of professional communication arenas This book presents a range of perspectives, examples, and concepts for teaching international professional communication in different settings. Industry professionals and academic researchers alike have written entries for Teaching and Training for Global Engineering: Perspectives on Culture and Professional Communication Practices, which have been organized into four cohesive, context-based sections that examine central issues associated with offering effective instruction on communication in global settings. The first section presents approaches for teaching issues of language and visual design related to international communication. The second section reviews aspects of software use and ethical practices associated with communicating globally. The third ection discusses how educators can use information a...

  16. Lithium-ion battery materials and engineering current topics and problems from the manufacturing perspective

    CERN Document Server

    Gulbinska, Malgorzata K

    2014-01-01

    Gaining public attention due, in part,  to their potential application as energy storage devices in cars, Lithium-ion batteries have encountered widespread demand, however, the understanding of lithium-ion technology has often lagged behind production. This book defines the most commonly encountered challenges from the perspective of a high-end lithium-ion manufacturer with two decades of experience with lithium-ion batteries and over six decades of experience with batteries of other chemistries. Authors with years of experience in the applied science and engineering of lithium-ion batterie

  17. Interdisciplinary research and education at the biology-engineering-computer science interface: a perspective.

    Science.gov (United States)

    Tadmor, Brigitta; Tidor, Bruce

    2005-09-01

    Progress in the life sciences, including genome sequencing and high-throughput experimentation, offers an opportunity for understanding biology and medicine from a systems perspective. This 'new view', which complements the more traditional component-based approach, involves the integration of biological research with approaches from engineering disciplines and computer science. The result is more than a new set of technologies. Rather, it promises a fundamental reconceptualization of the life sciences based on the development of quantitative and predictive models to describe crucial processes. To achieve this change, learning communities are being formed at the interface of the life sciences, engineering and computer science. Through these communities, research and education will be integrated across disciplines and the challenges associated with multidisciplinary team-based science will be addressed.

  18. Faculty perspectives on the inclusion of work-related learning in engineering curricula

    DEFF Research Database (Denmark)

    Magnell, Marie; Geschwind, Lars Allan; Kolmos, Anette

    2017-01-01

    into the curriculum and to identify factors that faculty see as important if the amount of work-related learning is to increase. The results show that faculty members are positive about integrating work-related issues into the curriculum. Programmes with more extensive connections to industry offer more integrated......The purpose of this paper is to identify faculty perspectives on the integration of work-related issues in engineering education. A mixed methods approach was used to explore faculty attitudes towards work-related learning, to describe activities related to working life that have been introduced...... activities, such as projects with external actors, and use professional contacts established through research in their teaching. In order to increase work-related learning in engineering curricula, faculty request clear goals and pedagogical tools. Other options to increase work-related learning include...

  19. Transformation of engineering education: Taking a perspective for the challenges of change

    Science.gov (United States)

    Siddiqui, Junaid Abdul Wahid

    There are a variety of imperatives which call us to transform engineering education. Those who have made attempts to facilitate a change in engineering education have experienced slow or no progress. The literature on change has suggestions and strategies related to educational change but most of them are not able to guide the conversations and actions effectively. People interested in understanding the challenges often ask 'what makes educational change so difficult?' This research is an effort towards finding an answer to this question. The study adopted a transdisciplinary approach while taking a systems perspective on educational change in order to examine the challenges. Instead of exploring the effectiveness of change strategies and interventions, this study sought to understand the basic nature of change in engineering education organizations. For this purpose, the study adopted an integrated theoretical framework consisting of systems thinking, complexity theory, and transformative learning theory. The methodology was designed on the complexity research paradigm with interpretive qualitative methods used for data analysis. This approach enabled understanding the social and human conditions which reduce or enhance the likelihood of change in the context of an engineering education organization. The context for this study to investigate the challenges of transformation in engineering education is efforts around educating the Engineer of 2020. Four institutional initiatives at various stages in the transformation process provided cases for investigation in the study. The engineering educators at the four institutions participating in the study had experiences of active engagement in educational change. The interpretive qualitative analysis of the participants' accounts induced a systems perspective of the challenges which faculty face in their educational transformation efforts. The inertia which educational organizations experience against change appears to

  20. A Perspective on the Clinical Translation of Scaffolds for Tissue Engineering

    Science.gov (United States)

    Webber, Matthew J.; Khan, Omar F.; Sydlik, Stefanie A.; Tang, Benjamin C.; Langer, Robert

    2016-01-01

    Scaffolds have been broadly applied within tissue engineering and regenerative medicine to regenerate, replace, or augment diseased or damaged tissue. For a scaffold to perform optimally, several design considerations must be addressed, with an eye toward the eventual form, function, and tissue site. The chemical and mechanical properties of the scaffold must be tuned to optimize the interaction with cells and surrounding tissues. For complex tissue engineering, mass transport limitations, vascularization, and host tissue integration are important considerations. As the tissue architecture to be replaced becomes more complex and hierarchical, scaffold design must also match this complexity to recapitulate a functioning tissue. We outline these design constraints and highlight creative and emerging strategies to overcome limitations and modulate scaffold properties for optimal regeneration. We also highlight some of the most advanced strategies that have seen clinical application and discuss the hurdles that must be overcome for clinical use and commercialization of tissue engineering technologies. Finally, we provide a perspective on the future of scaffolds as a functional contributor to advancing tissue engineering and regenerative medicine. PMID:25201605

  1. Larval morphology and complex vocal repertoire of Rhacophorus helenae (Anura: Rhacophoridae), a rare flying frog from Vietnam.

    Science.gov (United States)

    Vassilieva, Anna B; Gogoleva, Svetlana S; Poyarkov, Nikolay A Jr

    2016-06-24

    We present new data on the distribution, reproduction, larval morphology and vocalization of Rhacophorus helenae (Rhacophoridae), a narrowly distributed frog from southern Vietnam. Two new populations of R. helenae were discovered during field surveys in the lowland monsoon forests in Dong Nai and Ba Ria-Vung Tau provinces in 2010-2013. Spawning was observed in May 2013. Egg clutches containing small (2.3±0.1 mm) unpigmented eggs were embedded in a foam nest and suspended high on trees above temporary ponds. The tadpoles of R. helenae have a morphology typical of pond-dwelling Rhacophorus larvae with a moderate tail length and a labial tooth row formula of 5(2-5)/3. Postmetamorphic juveniles differed from adult frogs in the features of their coloration and less developed webbing. The complex vocal repertoire of R. helenae included five types of tonal, wideband and pulsed calls and several transitional signal types differentiated by frequency and amplitude parameters. Calls were uttered as singular signals (pulsed calls) or within non-stereotyped series of variable duration (other call types). The complex structure of the advertisement call markedly distinguishes R. helenae from other members of the Rhacophorus reinwardtii species complex.

  2. Social norms of "good" design: Interdisciplinary perspectives from a survey of engineers and clinicians in bioengineering.

    Science.gov (United States)

    Johnson, Angela N

    2016-08-01

    In bioengineering training for new researchers and engineers, a great deal of time is spent discussing what constitutes "good" design. Conceptualization of good design, however, varies widely across interdisciplinary team members, with potential to both foster innovation or lead to unproductive conflict. To explore how groups central to bioengineering teams (physicians/clinicians and engineers/physicists) conceptualize good design, we asked 176 professionals in bioengineering to complete a comprehensive online survey including items designed to assess cognitive and moral foundations (validated MFQ30 tool) and custom items assessing perceptions on good design in three areas (good design characteristics, reputation of design approvers, and perceived design patient/consumer suitability). Of those that responded, 82 completed all quantitative survey sections and were included in this preliminary analysis. Correlations between response areas were examined to explore the possible links between cognitive and moral biases and perspectives on good design. The survey results indicated that both groups were more conservative than average Americans based on previous reports, and clinicians scored higher on average for all MFQ30 domains. Numerous significant correlations with good design were observed among clinicians, while engineers/physicists most closely correlated good design with prescriber approval and scientific/technical literature. The exploratory analysis demonstrated the potential utility of sociological frameworks to explore relationships in design thinking with potential utility to stimulate thriving conversation on team-based design thinking in bioengineering education and practice.

  3. Food Engineering at Multiple Scales: Case Studies, Challenges and the Future—A European Perspective

    NARCIS (Netherlands)

    Roos, Y.; Fryer, P.J.; Knorr, D.; Schuchmann, H.P.; Schroën, C.G.P.H.; Schutyser, M.A.I.; Trystram, G.; Windhab, E.J.

    2016-01-01

    A selection of Food Engineering research including food structure engineering, novel emulsification processes, liquid and dry fractionation, Food Engineering challenges and research with comments on European Food Engineering education is covered. Food structure engineering is discussed by using

  4. Observing Engineering Student Teams from the Organization Behavior Perspective Using Linguistic Analysis of Student Reflections and Focus Group Interviews

    Science.gov (United States)

    Kearney, Kerri S.; Damron, Rebecca; Sohoni, Sohum

    2015-01-01

    This paper investigates group/team development in computer engineering courses at a University in the Central USA from the perspective of organization behavior theory, specifically Tuckman's model of the stages of group development. The investigation, conducted through linguistic analysis of student reflection essays, and through focus group…

  5. Description of Survey Data Regarding the Chemical Repackaging Plant Accident West Helena, Arkansas

    Energy Technology Data Exchange (ETDEWEB)

    Sorensen, J.H.; Vogt, B.M.

    1999-03-01

    Shortly after 1:00 p.m. on Thursday, May 8, 1997, clouds of foul-smelling smoke began pouring from an herbicide and pesticide packaging plant in West Helena, Arkansas. An alert was sounded, employees evacuated, and the West Helena fire department was called. As three firefighters prepared to enter the plant, the chemical compounds exploded, collapsing a solid concrete block wall, and killing all three firefighters. As the odorous smoky cloud drifted away from the plant, authorities ordered residents in a 2-mile area downwind of the plant to evacuate and those in the 2- to 3-mile zone to shelter in place. This study examines and compares the responses to a mail survey of those ordered to evacuate and those told to shelter in place. Among the variables examined are compliance with official orders and perceived warnings, threat perception, time and source of first warning, response times, and behavior characteristics for both populations. The findings indicate that 90% of those that were told to evacuate did so but only 27% of those told to shelter-in-place did so, with 68% opting to evacuate instead. The implications of these findings for emergency managers is that people will likely choose to evacuate when both warnings to evacuate and warnings to shelter are issued to residents in close proximity to each other. The findings on warning times closely resemble other findings from evacuations when chemical accidents occur and route notification is used for warning residents.

  6. Chlorella species as hosts for genetic engineering and expression of heterologous proteins: Progress, challenge and perspective.

    Science.gov (United States)

    Yang, Bo; Liu, Jin; Jiang, Yue; Chen, Feng

    2016-10-01

    The species of Chlorella represent a highly specialized group of green microalgae that can produce high levels of protein. Many Chlorella strains can grow rapidly and achieve high cell density under controlled conditions and are thus considered to be promising protein sources. Many advances in the genetic engineering of Chlorella have occurred in recent years, with significant developments in successful expression of heterologous proteins for various applications. Nevertheless, a lot of obstacles remain to be addressed, and a sophisticated and stable Chlorella expression system has yet to emerge. This review provides a brief summary of current knowledge on Chlorella and an overview of recent progress in the genetic engineering of Chlorella, and highlights the advances in the development of a genetic toolbox of Chlorella for heterologous protein expression. Research directions to further exploit the Chlorella expression system with respect to both challenges and perspectives are also discussed. This paper serves as a comprehensive literature review for the Chlorella community and will provide valuable insights into future exploration of Chlorella as a promising host for heterologous protein expression. Copyright © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Editorial - A critical perspective on geo-engineering for eutrophication management in lakes.

    Science.gov (United States)

    Lürling, Miquel; Mackay, Eleanor; Reitzel, Kasper; Spears, Bryan M

    2016-06-15

    Eutrophication is the primary worldwide water quality issue. Reducing excessive external nutrient loading is the most straightforward action in mitigating eutrophication, but lakes, ponds and reservoirs often show little, if any, signs of recovery in the years following external load reduction. This is due to internal cycling of phosphorus (P). Geo-engineering, which we can here define as activities intervening with biogeochemical cycles to control eutrophication in inland waters, represents a promising approach, under appropriate conditions, to reduce P release from bed sediments and cyanobacteria accumulation in surface waters, thereby speeding up recovery. In this overview, we draw on evidence from this special issue Geoengineering in Lakes, and on supporting literature to provide a critical perspective on the approach. We demonstrate that many of the strong P sorbents in the literature will not be applicable in the field because of costs and other constraints. Aluminium and lanthanum modified compounds are among the most effective compounds for targeting P. Flocculants and ballast compounds can be used to sink cyanobacteria, in the short term. We emphasize that the first step in managing eutrophication is a system analysis that will reveal the main water and P flows and the biological structure of the waterbody. These site specific traits can be significant confounding factors dictating successful eutrophication management. Geo-engineering techniques, considered collectively, as part of a tool kit, may ensure successful management of eutrophication through a range of target effects. In addition, novel developments in modified zeolites offer simultaneous P and nitrogen control. To facilitate research and reduce the delay from concept to market a multi-national centre of excellence is required. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Approaching Borderlands. Literary Representation of the Border in the Novel Their dogs came with them by Helena María Viramontes

    Directory of Open Access Journals (Sweden)

    Markéta Riebová

    2016-12-01

    Full Text Available Using three mutually interwoven theoretical approaches, the article analyses the complexity of the borderlands space in the literary representation of Los Angeles in the novel Their dogs came with them by Helena Maria Viramontes.

  9. Preliminary assessment report for Fort William Henry Harrison, Montana Army National Guard, Helena, Montana

    International Nuclear Information System (INIS)

    DuWaldt, J.; Meyer, T.

    1993-07-01

    This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at a Montana Army National Guard (MTARNG) property near Helena, Montana. Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a basis for establishing corrective actions in response to releases of hazardous substances. The principal objective of the PA is to characterize the site accurately and determine the need for further action by examining site activities, quantities of hazardous substances present, and potential pathways by which contamination could affect public health and the environment. This PA satisfies, for the Fort William Henry Harrison property, requirements of the Department of Defense Installation Restoration Program

  10. Corneal stem cells and tissue engineering: Current advances and future perspectives.

    Science.gov (United States)

    de Araujo, Aline Lütz; Gomes, José Álvaro Pereira

    2015-06-26

    Major advances are currently being made in regenerative medicine for cornea. Stem cell-based therapies represent a novel strategy that may substitute conventional corneal transplantation, albeit there are many challenges ahead given the singularities of each cellular layer of the cornea. This review recapitulates the current data on corneal epithelial stem cells, corneal stromal stem cells and corneal endothelial cell progenitors. Corneal limbal autografts containing epithelial stem cells have been transplanted in humans for more than 20 years with great successful rates, and researchers now focus on ex vivo cultures and other cell lineages to transplant to the ocular surface. A small population of cells in the corneal endothelium was recently reported to have self-renewal capacity, although they do not proliferate in vivo. Two main obstacles have hindered endothelial cell transplantation to date: culture protocols and cell delivery methods to the posterior cornea in vivo. Human corneal stromal stem cells have been identified shortly after the recognition of precursors of endothelial cells. Stromal stem cells may have the potential to provide a direct cell-based therapeutic approach when injected to corneal scars. Furthermore, they exhibit the ability to deposit organized connective tissue in vitro and may be useful in corneal stroma engineering in the future. Recent advances and future perspectives in the field are discussed.

  11. A system engineer's Perspective on Human Errors For a more Effective Management of Human Factors in Nuclear Power Plants

    International Nuclear Information System (INIS)

    Lee, Yong-Hee; Jang, Tong-Il; Lee, Soo-Kil

    2007-01-01

    The management of human factors in nuclear power plants (NPPs) has become one of the burden factors during their operating period after the design and construction period. Almost every study on the major accidents emphasizes the prominent importance of the human errors. Regardless of the regulatory requirements such as Periodic Safety Review, the management of human factors would be a main issue to reduce the human errors and to enhance the performance of plants. However, it is not easy to find out a more effective perspective on human errors to establish the engineering implementation plan for preventing them. This paper describes a system engineer's perspectives on human errors and discusses its application to the recent study on the human error events in Korean NPPs

  12. Teaching design in the first years of a traditional mechanical engineering degree: methods, issues and future perspectives

    Science.gov (United States)

    Silva, Arlindo; Fontul, Mihail; Henriques, Elsa

    2015-01-01

    Engineering design is known as an answer to an ill-defined problem. As any answer to an ill-defined problem, it can never be completely right or absolutely wrong. The methods that universities use to teach engineering design, as a consequence of this, suffer from the same fate. However, the accumulated experience with the 'chalk and talk' teaching tradition has led to a reality in which the employers of fresh graduates are not happy with the engineers they are getting. Part of their complaints are related with the inability of recently graduate engineers to work in problems where the boundaries are not well defined, are interdisciplinary, require the use of effective communication and integrate non-technical issues. These skills are mostly absent from traditional engineering curricula. This paper demonstrates the implementation of engineering design perspectives enhancing some of the aforementioned skills in a traditional mechanical engineering curriculum. It emphasises in particular a design project that is tackled in a sequence of conventional courses with a focus that depends on the course objectives and disciplinary domain. This transdisciplinary design project conveys the idea (and effectively implements it concurrently) that design is multidisciplinary.

  13. Health effects engineering: Perspectives for environmental health and environmental engineering studies-domestic biomass combustion as an example

    International Nuclear Information System (INIS)

    Gao Xiang; Yu Qi; Chen Limin

    2007-01-01

    Health effects engineering (HEE) is a newly developed research field, which involves collaboration with environmental scientists, engineering researchers, and toxicologists. By employing the methods of HEE, one can not only confirm which attributes of the project are likely to contribute to certain health effects, but can also get rid of the adverse health effects by engineering technologies. HEE is thought to be particularly important to domestic projects in which there is a lack of environmental assessment. This paper presented the authors' viewpoints of the principles of HEE in the field of the environmental health and engineering studies by using programs of domestic biomass combustion as an example. The authors showed that there are three sub-fields of HEE, which are as follows: engineering behavior, the pollution characteristics, and the health effects. The authors conclude that the principles of HEE compose a helix with the studies in the fields of environmental science, health, and engineering, and give suggestions on how to perform HEE in a practical field

  14. A biased historical perspective of women in the engineering field at Dryden from 1946 to November 1992

    Science.gov (United States)

    Powers, Sheryll Goecke

    1994-01-01

    Being a woman in engineering, and in particular, being the woman with the dubious distinction of having the most years at Dryden, gives the author a long-term perspective on the women who worked in the engineering field and their working environment. The working environment for the women was influenced by two main factors. One factor was the Dryden's growth of 14 persons (2 of them women) at the end of 1946 to the present size. The other factor was the need for programming knowledge when the digital computers came into use. Women have been involved with flight research at Dryden since the days of the first transonic and supersonic airplanes. This paper uses available records, along with memory, to document the number of women in engineering at Dryden, to comment about observed trends, and to make personal observations.

  15. Nutritional knowledge in European adolescents : results from the HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) study

    OpenAIRE

    Hallström, Lena; Sichert-Hellert, Wolfgang; Beghin, Laurent; De Henauw, Stefaan; GRAMMATIKAKI, Eva; Manios, Yannis; Mesana, Maribella; Molnar, Dénes; Dietrich, Sabina; PICCINELLI, Raffaela; Plada, Maria; Sjöström, Michael; Moreno, Luis; Kersting, Mathilde

    2011-01-01

    Objective: To build up sufficient knowledge of a ‘healthy diet’. Here, we report on the assessment of nutritional knowledge using a uniform method in a large sample of adolescents across Europe. Design: A cross-sectional study. Setting: The European multicentre HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) study conducted in 2006–2007 in ten cities in Austria, Belgium, France, Germany, Greece (one inland and one island city), Hungary, Italy, Spain and Sweden. Subjects: A to...

  16. Technology-Facilitated Diagnosis and Treatment of Individuals with Autism Spectrum Disorder: An Engineering Perspective

    Directory of Open Access Journals (Sweden)

    Xiongyi Liu

    2017-10-01

    Full Text Available The rapid development of computer and robotic technologies in the last decade is giving hope to perform earlier and more accurate diagnoses of the Autism Spectrum Disorder (ASD, and more effective, consistent, and cost-conscious treatment. Besides the reduced cost, the main benefit of using technology to facilitate treatment is that stimuli produced during each session of the treatment can be controlled, which not only guarantees consistency across different sessions, but also makes it possible to focus on a single phenomenon, which is difficult even for a trained professional to perform, and deliver the stimuli according to the treatment plan. In this article, we provide a comprehensive review of research on recent technology-facilitated diagnosis and treat of children and adults with ASD. Different from existing reviews on this topic, which predominantly concern clinical issues, we focus on the engineering perspective of autism studies. All technology facilitated systems used for autism studies can be modeled as human machine interactive systems where one or more participants would constitute as the human component, and a computer-based or a robotic-based system would be the machine component. Based on this model, we organize our review with the following questions: (1 What are presented to the participants in the studies and how are the content and delivery methods enabled by technologies? (2 How are the reactions/inputs collected from the participants in response to the stimuli in the studies? (3 Are the experimental procedure and programs presented to participants dynamically adjustable based on the responses from the participants, and if so, how? and (4 How are the programs assessed?

  17. Production of anthocyanins in metabolically engineered microorganisms: Current status and perspectives.

    Science.gov (United States)

    Zha, Jian; Koffas, Mattheos A G

    2017-12-01

    Microbial production of plant-derived natural products by engineered microorganisms has achieved great success thanks to large extend to metabolic engineering and synthetic biology. Anthocyanins, the water-soluble colored pigments found in terrestrial plants that are responsible for the red, blue and purple coloration of many flowers and fruits, are extensively used in food and cosmetics industry; however, their current supply heavily relies on complex extraction from plant-based materials. A promising alternative is their sustainable production in metabolically engineered microbes. Here, we review the recent progress on anthocyanin biosynthesis in engineered bacteria, with a special focus on the systematic engineering modifications such as selection and engineering of biosynthetic enzymes, engineering of transportation, regulation of UDP-glucose supply, as well as process optimization. These promising engineering strategies will facilitate successful microbial production of anthocyanins in industry in the near future.

  18. Production of anthocyanins in metabolically engineered microorganisms: Current status and perspectives

    Directory of Open Access Journals (Sweden)

    Jian Zha

    2017-12-01

    Full Text Available Microbial production of plant-derived natural products by engineered microorganisms has achieved great success thanks to large extend to metabolic engineering and synthetic biology. Anthocyanins, the water-soluble colored pigments found in terrestrial plants that are responsible for the red, blue and purple coloration of many flowers and fruits, are extensively used in food and cosmetics industry; however, their current supply heavily relies on complex extraction from plant-based materials. A promising alternative is their sustainable production in metabolically engineered microbes. Here, we review the recent progress on anthocyanin biosynthesis in engineered bacteria, with a special focus on the systematic engineering modifications such as selection and engineering of biosynthetic enzymes, engineering of transportation, regulation of UDP-glucose supply, as well as process optimization. These promising engineering strategies will facilitate successful microbial production of anthocyanins in industry in the near future.

  19. Development of engineering and materials science in Pronuclear: retrospective and perspectives for the 80's

    International Nuclear Information System (INIS)

    Haydt, H.M.

    1982-01-01

    The evolution of a great number of persons that completed engineering and materials science course, up to 1981, is showed. The Pronuclear, an organ that finances the personel education with emphasis in nuclear engineering, is described. (E.G.) [pt

  20. An Alternative Perspective for Malaysian Engineering Education: A Review from Year 2000-2012

    Science.gov (United States)

    Jayarajah, Kamaleswaran; Saat, Rohaida Mohd; Rauf, Rose Amnah Abdul

    2013-01-01

    The purpose of this study is to explore the research base of engineering education in the "Journal of Engineering Education" ("JEE") through an analysis review of articles for a 12-year period, from 2000 to 2012. The research base review focuses on identifying five characteristics of engineering education: (a) temporal…

  1. Adapting planning and scheduling concepts to an engineering perspective: Key issues and successful techniques

    International Nuclear Information System (INIS)

    Finnegan, J.M.

    1986-01-01

    Traditional approaches to engineering planning are slanted toward the formats and interests of downstream implementation, and do not always consider the form and criticality of the front-end engineering development process. These processes and scopes are less defined and more subjective than most construction and operations tasks, and require flexible scheduling methods. This paper discusses the characteristics and requirement of engineering schedules, presents concepts for approaching planning in this field, and illustrates simple methods for developing and analyzing engineering plans, and evaluating schedule performance. Engineering plans are structured into a schedule hierarchy which delineates appropriate control and responsibilities, and is governed by key evaluation and decision milestones. Schedule risk analysis considers the uncertainty of engineering tasks, and critical resource constraints. Methods to evaluate schedule performance recognize that engineers and managers are responsible for adequate planning and forecasting, and quality decisions, even if they cannot control all factors influencing schedule results

  2. Adaptation and development of software simulation methodologies for cardiovascular engineering: present and future challenges from an end-user perspective.

    Science.gov (United States)

    Díaz-Zuccarini, V; Narracott, A J; Burriesci, G; Zervides, C; Rafiroiu, D; Jones, D; Hose, D R; Lawford, P V

    2009-07-13

    This paper describes the use of diverse software tools in cardiovascular applications. These tools were primarily developed in the field of engineering and the applications presented push the boundaries of the software to address events related to venous and arterial valve closure, exploration of dynamic boundary conditions or the inclusion of multi-scale boundary conditions from protein to organ levels. The future of cardiovascular research and the challenges that modellers and clinicians face from validation to clinical uptake are discussed from an end-user perspective.

  3. Sedentary behaviour and clustered metabolic risk in adolescents: the HELENA study.

    Science.gov (United States)

    Rey-López, J P; Bel-Serrat, S; Santaliestra-Pasías, A; de Moraes, A C; Vicente-Rodríguez, G; Ruiz, J R; Artero, E G; Martínez-Gómez, D; Gottrand, F; De Henauw, S; Huybrechts, I; Polito, A; Molnar, D; Manios, Y; Moreno, L A

    2013-10-01

    Although sedentary behaviours are linked with mortality for cardiovascular reasons, it is not clear whether they are negatively related with cardio-metabolic risk factors. The aim was to examine the association between time engaged in television (TV) viewing or playing with videogames and a clustered cardio-metabolic risk in adolescents. Sedentary behaviours and physical activity were assessed in 769 adolescents (376 boys, aged 12.5-17.5 years) from the HELENA-CSS study. We measured systolic blood pressure, HOMA index, triglycerides, TC/HDL-c, VO₂max and the sum of four skinfolds, and a clustered metabolic risk index was computed. A multilevel regression model (by Poisson) was performed to calculate the prevalence ratio of having a clustered metabolic risk. In boys, playing >4 h/day with videogames (weekend) and moderate to vigorous PA (MVPA) was associated with cardio-metabolic risk after adjustment for age, maternal education and MVPA. In contrast, TV viewing was not associated with the presence of cardio-metabolic risk. In boys, playing with videogames may impair cardio-metabolic health during the adolescence. Adolescents should be encouraged to increase their participation in physical activity of at least moderate intensity to obtain a more favourable risk factor profile. Copyright © 2012 Elsevier B.V. All rights reserved.

  4. Remapping HELENA to incompressible plasma rotation parallel to the magnetic field

    Energy Technology Data Exchange (ETDEWEB)

    Poulipoulis, G.; Throumoulopoulos, G. N. [Physics Department, University of Ioannina, Ioannina 451 10 (Greece); Konz, C. [Max-Planck Institut für Plasma Physics, 85748 Garching bei München (Germany)

    2016-07-15

    Plasma rotation in connection to both zonal and mean (equilibrium) flows can play a role in the transitions to the advanced confinement regimes in tokamaks, as the L-H transition and the formation of internal transport barriers (ITBs). For incompressible rotation, the equilibrium is governed by a generalised Grad-Shafranov (GGS) equation and a decoupled Bernoulli-type equation for the pressure. For parallel flow, the GGS equation can be transformed to one identical in form with the usual Grad-Shafranov equation. In the present study on the basis of the latter equation, we have extended HELENA, an equilibrium fixed boundary solver. The extended code solves the GGS equation for a variety of the two free-surface-function terms involved for arbitrary Alfvén Mach number and density functions. We have constructed diverted-boundary equilibria pertinent to ITER and examined their characteristics, in particular, as concerns the impact of rotation on certain equilibrium quantities. It turns out that the rotation and its shear affect noticeably the pressure and toroidal current density with the impact on the current density being stronger in the parallel direction than in the toroidal one.

  5. Healthy lifestyle by nutrition in adolescence (HELENA). A new EU funded project.

    Science.gov (United States)

    Vicente-Rodriguez, German; Libersa, Christian; Mesana, Maria I; Béghin, Laurent; Iliescu, Catalina; Moreno Aznar, Luis A; Dallongeville, Jean; Gottrand, Frédéric

    2007-01-01

    The key to health promotion and disease prevention in the 21st century is to establish an environment that supports positive health behaviour and healthy lifestyle from childhood. The HELENA project includes cross-sectional, crossover and pilot community intervention multi-centre studies, as an integrated approach to the above-mentioned problem. Dietary intake, nutrition knowledge and eating attitudes, food choices and preferences, body composition, biochemical, physical activity and fitness and genotype (to analyse gene-nutrient and gene-environment interactions) assessment will provide the full information about the nutritional and lifestyle status of the European adolescents. The requirements for health promoting foods will be also identified, and three sensory acceptable products for adolescents will be developed. Harmonization and standardisation of the assessments for both scientific and technological objectives should result in reliable and comparable data of a representative sample of European adolescents. This will contribute to understand why health-related messages are not being as effective as expected in the adolescent population. A realistic intervention strategy will be proposed in order to achieve the goals of understanding and effectively enhancing nutritional and lifestyle habits of adolescents in Europe.

  6. Diversity and characterization of culturable fungi from marine sediment collected from St. Helena Bay, South Africa.

    Science.gov (United States)

    Mouton, Marnel; Postma, Ferdinand; Wilsenach, Jac; Botha, Alfred

    2012-08-01

    Marine fungi are known to originate from a wide variety of habitats within the marine environment. Marine sediment represents one environmental niche, with most fungi occurring in these sediments being facultative marine fungi with terrestrial origins. It has not been proven whether these fungi merely survive the harsh environmental conditions presented by the ocean sediment, as opposed to playing an active role in this ecological niche. During this study, marine sediment was collected from St. Helena Bay, on the west coast of the Western Cape, South Africa. Using dilution, enrichment, and repetitive culturing techniques, 59 fungal isolates were obtained from marine sediments and identified to at least genus level using morphological and molecular methods. Moreover, a series of tests were performed to characterize the physical and physicochemical attributes of the isolates. Results showed that the isolates not only survived but also had the potential to grow in the natural conditions present in this environment. Extracellular cellulase was produced by the filamentous fungal isolates indicating their probable role in detrital decay processes and therefore the carbon cycle on the ocean bed. Also, denitrification patterns were observed when isolates were grown in liquid media amended with NaNO(2), NaNO(3), and (NH(4))SO(4), implicating that these fungi have the potential to play an active role in denitrification, co-denitrification, and ammonification phases of nitrogen cycles occurring in the marine sediments.

  7. A case study of the knowledge transfer practices from the perspectives of highly experienced engineers in the aerospace industry

    Science.gov (United States)

    Martin, Deloris

    Purpose. The purpose of this study was to describe the existing knowledge transfer practices in selected aerospace companies as perceived by highly experienced engineers retiring from the company. Specifically it was designed to investigate and describe (a) the processes and procedures used to transfer knowledge, (b) the systems that encourage knowledge transfer, (c) the impact of management actions on knowledge transfer, and (d) constraining factors that might impede knowledge transfer. Methodology. A descriptive case study was the methodology applied in this study. Qualitative data were gathered from highly experienced engineers from 3 large aerospace companies in Southern California. A semistructured interview was conducted face-to-face with each participant in a private or semiprivate, non-workplace setting to obtain each engineer's perspectives on his or her company's current knowledge transfer practices. Findings. The participants in this study preferred to transfer knowledge using face-to-face methods, one-on-one, through actual troubleshooting and problem-solving scenarios. Managers in these aerospace companies were observed as having knowledge transfer as a low priority; they tend not to promote knowledge transfer among their employees. While mentoring is the most common knowledge transfer system these companies offer, it is not the preferred method of knowledge transfer among the highly experienced engineers. Job security and schedule pressures are the top constraints that impede knowledge transfer between the highly experienced engineers and their coworkers. Conclusions. The study data support the conclusion that the highly experienced engineers in the study's aerospace companies would more likely transfer their knowledge to those remaining in the industry if the transfer could occur face-to-face with management support and acknowledgement of their expertise and if their job security is not threatened. The study also supports the conclusion that managers

  8. Toward a Stakeholder Perspective on Social Stability Risk of Large Hydraulic Engineering Projects in China: A Social Network Analysis

    Directory of Open Access Journals (Sweden)

    Zhengqi He

    2018-04-01

    Full Text Available In China, large hydraulic engineering projects have made a great contribution to social economic development; at the same time, they also lead to social risks that affect social stability. The pluralism of stakeholders in large hydraulic engineering projects and the complex interrelationship among stakeholders are the important factors affecting social stability risk. Previous studies of social stability risk have mainly focused on risk identification and risk assessment, without considering the relationships among stakeholders and their linkages of risks. For large hydraulic engineering projects, this paper investigated the relevant risk factors and their interrelationships through a literature review and interviews that represented stakeholder perspectives. The key social stability risk factors were identified based on social network analysis. A multi-channel project financial system, a perfect interest compensation mechanism, an efficient prevention mechanism of group events, and a complete project schedule control system were proposed to mitigate the social stability risks. This study combined stakeholder management with risk management by using social network analysis, providing reference for the social stability risk management of large engineering projects in China.

  9. Perspectives on the future of software engineering essays in honor of Dieter Rombach

    CERN Document Server

    Münch, Jürgen

    2013-01-01

    The dependence on quality software in all areas of life is what makes software engineering a key discipline for today's society. Thus, over the last few decades it has been increasingly recognized that it is particularly important to demonstrate the value of software engineering methods in real-world environments, a task which is the focus of empirical software engineering. One of the leading protagonists of this discipline worldwide is Prof. Dr. Dr. h.c. Dieter Rombach, who dedicated his entire career to empirical software engineering. For his many important contributions to the field he has

  10. An Investigation of First-Year Engineering Student and Instructor Perspectives of Learning Analytics Approaches

    Science.gov (United States)

    Knight, David B.; Brozina, Cory; Novoselich, Brian

    2016-01-01

    This paper investigates how first-year engineering undergraduates and their instructors describe the potential for learning analytics approaches to contribute to student success. Results of qualitative data collection in a first-year engineering course indicated that both students and instructors\temphasized a preference for learning analytics…

  11. Perspective on Models in Theoretical and Practical Traditions of Knowledge: The Example of Otto Engine Animations

    Science.gov (United States)

    Haglund, Jesper; Stromdahl, Helge

    2012-01-01

    Nineteen informants (n = 19) were asked to study and comment two computer animations of the Otto combustion engine. One animation was non-interactive and realistic in the sense of depicting a physical engine. The other animation was more idealised, interactive and synchronised with a dynamic PV-graph. The informants represented practical and…

  12. A Qatari Perspective on Women in the Engineering Pipeline: An Exploratory Study

    Science.gov (United States)

    Sulaiman, Noor Fauziah; AlMuftah, Hend

    2010-01-01

    Under-representation of women in engineering has received a great deal of attention, but remained limited largely to a Western context. Thus, this article aims to unveil the barriers to progress, tracking the performance and the emerging trend of success at the undergraduate level of women in engineering in a different cultural dimension.…

  13. Assessing the Higher National Diploma Chemical Engineering Programme in Ghana: Students' Perspective

    Science.gov (United States)

    Boateng, Cyril D.; Bensah, Edem Cudjoe; Ahiekpor, Julius C.

    2012-01-01

    Chemical engineers have played key roles in the growth of the chemical and allied industries in Ghana but indigenous industries that have traditionally been the domain of the informal sector need to be migrated to the formal sector through the entrepreneurship and innovation of chemical engineers. The Higher National Diploma Chemical Engineering…

  14. Environmental Barrier Coatings for Turbine Engines: A Design and Performance Perspective

    Science.gov (United States)

    Zhu, Dongming; Fox, Dennis S.; Ghosn, Louis; Smialek, James L.; Miller, Robert A.

    2009-01-01

    Ceramic thermal and environmental barrier coatings (TEBC) for SiC-based ceramics will play an increasingly important role in future gas turbine engines because of their ability to effectively protect the engine components and further raise engine temperatures. However, the coating long-term durability remains a major concern with the ever-increasing temperature, strength and stability requirements in engine high heat-flux combustion environments, especially for highly-loaded rotating turbine components. Advanced TEBC systems, including nano-composite based HfO2-aluminosilicate and rare earth silicate coatings are being developed and tested for higher temperature capable SiC/SiC ceramic matrix composite (CMC) turbine blade applications. This paper will emphasize coating composite and multilayer design approach and the resulting performance and durability in simulated engine high heat-flux, high stress and high pressure combustion environments. The advances in the environmental barrier coating development showed promise for future rotating CMC blade applications.

  15. [The study of Balantidium Helenae Bezzenberger, 1904 (Litostomatea, Trichostomatia) inhabiting the intestines of the frog Rana temporaria Linnaeus, 1758, in optical and electron microscopes].

    Science.gov (United States)

    Kornilova, O A; Chistyakova, L V

    2014-01-01

    The structure of the ciliate Balantidium helenae Bezzenberger, 1904 was investigated with the use of optical and electron microscopy. It was demonstrated that, together with the basic dimensional characteristics, main distinguishing features of the studied species include the following characters: the presence of a pointed prominence on the posterior margin of the cell; the presence of elongated cilia on the left margin of the vestibulum; and different shape and size of cortical ridges. Two morphologically different types of electron-dense bodies (supposedly hydrogenosoms) and also endobiotic bacteria were also found in the cytoplasm of B. helenae.

  16. Perspectives

    Indian Academy of Sciences (India)

    Unknown

    Developmental mechanisms: putting genes in their place. STUART A NEWMAN. Department of Cell Biology ... effects, multifactoriality and func- tional redundancy of gene action in the determination of. Perspectives .... The vertebrate seg- mental plate becomes sequentially partitioned into paired somites by a process that ...

  17. Fitness and fatness in relation with attention capacity in European adolescents: The HELENA study.

    Science.gov (United States)

    Cadenas-Sanchez, Cristina; Vanhelst, Jeremy; Ruiz, Jonatan R; Castillo-Gualda, Ruth; Libuda, Lars; Labayen, Idoia; De Miguel-Etayo, Pilar; Marcos, Ascensión; Molnár, Eszter; Catena, Andrés; Moreno, Luis A; Sjöström, Michael; Gottrand, Frederic; Widhalm, Kurt; Ortega, Francisco B

    2017-04-01

    To examine the association of health-related physical fitness components and accurate measures of fatness with attention in European adolescents. Cross-sectional study. A sub-sample of 444 adolescents from the HELENA study (14.5±1.2years) from 6 different countries participated in this study. Adolescents underwent evaluations of fitness (20m shuttle run, handgrip strength, standing long jump and 4×10m shuttle run tests), fatness (body mass index, skinfold thicknesses, bioelectrical impedance, Bod Pod and dual-energy X-ray absorptiometry) and attention (d2-test). Higher cardiorespiratory fitness was positively associated with better attention capacity (β=0.1, p=0.03). Body mass index and fat mass index measured by Bod Pod and dual-energy X-ray absorptiometry in a subset were negatively associated with attention (β=-0.11, p=0.02; β=-0.36, p=0.02; β=-0.34, p=0.03; respectively). All models were adjusted for age, sex, family-affluence scale and mother education. When these models were additionally adjusted for cardiorespiratory fitness when fatness was the main predictor and vice versa, the associations were somewhat attenuated and were no longer statistically significant. Muscular strength, speed-agility and body fatness markers measured by bioelectrical impedance and skinfolds were not associated with attention. The fit and non-overweight adolescents presented the highest values of attention capacity whilst their unfit and overweight peers showed the lowest values of attention (47.31±2.34 vs. 33.74±4.39; pattention, yet these associations are not independent. A combined effect was also observed, with fit and non-overweight adolescents showing the highest levels of attention and those unfit and overweight the lowest. Copyright © 2016 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  18. Ideal cardiovascular health and inflammation in European adolescents: The HELENA study.

    Science.gov (United States)

    González-Gil, E M; Santabárbara, J; Ruiz, J R; Bel-Serrat, S; Huybrechts, I; Pedrero-Chamizo, R; de la O, A; Gottrand, F; Kafatos, A; Widhalm, K; Manios, Y; Molnar, D; De Henauw, S; Plada, M; Ferrari, M; Palacios Le Blé, G; Siani, A; González-Gross, M; Gómez-Martínez, S; Marcos, A; Moreno Aznar, L A

    2017-05-01

    Inflammation plays a key role in atherosclerosis and this process seems to appear in childhood. The ideal cardiovascular health index (ICHI) has been inversely related to atherosclerotic plaque in adults. However, evidence regarding inflammation and ICHI in adolescents is scarce. The aim is to assess the association between ICHI and inflammation in European adolescents. As many as 543 adolescents (251 boys and 292 girls) from the Healthy Lifestyle in Europe by Nutrition in Adolescence (HELENA) study, a cross-sectional multi-center study including 9 European countries, were measured. C-reactive protein (CRP), complement factors C3 and C4, leptin and white blood cell counts were used to compute an inflammatory score. Multilevel linear models and multilevel logistic regression were used to assess the association between ICHI and inflammation controlling by covariates. Higher ICHI was associated with a lower inflammatory score, as well as with several individual components, both in boys and girls (p < 0.01). In addition, adolescents with at least 4 ideal components of the ICHI had significantly lower inflammatory score and lower levels of the study biomarkers, except CRP. Finally, the multilevel logistic regression showed that for every unit increase in the ICHI, the probability of having an inflammatory profile decreased by 28.1% in girls. Results from this study suggest that a better ICHI is associated with a lower inflammatory profile already in adolescence. Improving these health behaviors, and health factors included in the ICHI, could play an important role in CVD prevention. Copyright © 2016 The Italian Society of Diabetology, the Italian Society for the Study of Atherosclerosis, the Italian Society of Human Nutrition, and the Department of Clinical Medicine and Surgery, Federico II University. Published by Elsevier B.V. All rights reserved.

  19. Systems engineering perspective on eHealth implementations: case study of users

    CSIR Research Space (South Africa)

    Fanta, GB

    2015-09-01

    Full Text Available The expected outputs and outcomes for healthcare services delivery were not realized by the implemented eHealth systems in South Africa. This paper investigates the impact of system engineering management (SEM) practices on the efficiency...

  20. An historical perspective of the NERVA nuclear rocket engine technology program. Final Report

    International Nuclear Information System (INIS)

    Robbins, W.H.; Finger, H.B.

    1991-07-01

    Nuclear rocket research and development was initiated in the United States in 1955 and is still being pursued to a limited extent. The major technology emphasis occurred in the decade of the 1960s and was primarily associated with the Rover/NERVA Program where the technology for a nuclear rocket engine system for space application was developed and demonstrated. The NERVA (Nuclear Engine for Rocket Vehicle Application) technology developed twenty years ago provides a comprehensive and viable propulsion technology base that can be applied and will prove to be valuable for application to the NASA Space Exploration Initiative (SEI). This paper, which is historical in scope, provides an overview of the conduct of the NERVA Engine Program, its organization and management, development philosophy, the engine configuration, and significant accomplishments

  1. An historical perspective of the NERVA nuclear rocket engine technology program

    Science.gov (United States)

    Robbins, W. H.; Finger, H. B.

    1991-01-01

    Nuclear rocket research and development was initiated in the United States in 1955 and is still being pursued to a limited extent. The major technology emphasis occurred in the decade of the 1960s and was primarily associated with the Rover/NERVA Program where the technology for a nuclear rocket engine system for space application was developed and demonstrated. The NERVA (Nuclear Engine for Rocket Vehicle Application) technology developed twenty years ago provides a comprehensive and viable propulsion technology base that can be applied and will prove to be valuable for application to the NASA Space Exploration Initiative (SEI). This paper, which is historical in scope, provides an overview of the conduct of the NERVA Engine Program, its organization and management, development philosophy, the engine configuration, and significant accomplishments.

  2. Production of anthocyanins in metabolically engineered microorganisms: Current status and perspectives

    OpenAIRE

    Jian Zha; Mattheos A.G. Koffas

    2017-01-01

    Microbial production of plant-derived natural products by engineered microorganisms has achieved great success thanks to large extend to metabolic engineering and synthetic biology. Anthocyanins, the water-soluble colored pigments found in terrestrial plants that are responsible for the red, blue and purple coloration of many flowers and fruits, are extensively used in food and cosmetics industry; however, their current supply heavily relies on complex extraction from plant-based materials. A...

  3. Perceived value of student participation in the field of aerospace engineering from a student's perspective

    NARCIS (Netherlands)

    van Langen, Sven Kevin; Bentum, Marinus Jan; de Vries, Rowan; Grootjans, Robert; Grootjans, Roelof; Brethouwer, Martijn F.

    2013-01-01

    The importance of student participation in space projects is well known. New students are needed to supplement the future workforce and both experience and enthusiasm are important factors to join any industry. Students can also offer fresh perspectives to existing problems in any field of

  4. Connections Between Future Time Perspectives and Self-Regulated Learning for Mid-Year Engineering Students: A Multiple Case Study

    Science.gov (United States)

    Chasmar, Justine

    This dissertation presents multiple studies with the purpose of understanding the connections between undergraduate engineering students' motivations, specifically students' Future Time Perspectives (FTPs) and Self-Regulated Learning (SRL). FTP refers to the views students hold about the future and how their perceptions of current tasks are affected by these views. SRL connects the behaviors, metacognition, and motivation of students in their learning. The goals of this research project were to 1) qualitatively describe and document engineering students' SRL strategies, 2) examine interactions between engineering students' FTPs and SRL strategy use, and 3) explore goal-setting as a bridge between FTP and SRL. In an exploratory qualitative study with mid-year industrial engineering students to examine the SRL strategies used before and after an SRL intervention, results showed that students intended to use more SRL strategies than they attempted. However, students self-reported using new SRL strategies from the intervention. Students in this population also completed a survey and a single interview about FTP and SRL. Results showed perceptions of instrumentality of coursework and skills as motivation for using SRL strategies, and a varied use of SRL strategies for students with different FTPs. Overall, three types of student FTP were seen: students with a single realistic view of the future, conflicting ideal and realistic future views, or open views of the future. A sequential explanatory mixed methods study was conducted with mid-year students from multiple engineering majors. First a cluster analysis of survey results of FTP items compared to FTP interview responses was used for participant selection. Then a multiple case study was conducted with data collected through surveys, journal entries, course performance, and two interviews. Results showed that students with a well-defined FTP self-regulated in the present based on their varied perceptions of

  5. Improving female participation in professional engineering geology to bring new perspectives to ethics in the geosciences.

    Science.gov (United States)

    Pereira, Dolores

    2014-09-11

    Many papers have been published related to the retention and advancement of women in sciences. Engineering geology is one of the professional areas where women have not yet broken the gender barrier. The research issues of this paper are focused on why female students "leak out" at the end of engineering geology studies, and what can be done to encourage them to complete their degrees with an engineering career in mind. The author has studied students' preferences of the final year project required to complete their degree at the University of Salamanca (Salamanca, Spain). It has been found that most female students are choosing a more theoretical final project instead of a practical one relevant to professional employment, contrary to their male peers. Focus group meetings with the students showed that at the end of five years of engineering geology training, many female students, unsatisfied with the content of their courses, feel that their expectations had not been met. They often have preferences for traditional geology rather than applied branches of the subject. Also, they do not feel comfortable with future job prospects in the profession. From the findings of this research it is clear that tutoring and mentoring would be valuable from the beginning of studies to allow all students to become aware of the content and the potential outcomes of engineering geology studies. In the case of female students, it is particularly important for them to know from the very start that they are about to join what is still a man's world but that they are capable of achieving just as much as men can in the profession. Most importantly, the involvement of more female engineers in professional engineering, including teaching duties, should serve as example and role models in students' education and future careers.

  6. An Account of Women's Progress in Engineering: a Social Cognitive Perspective

    Science.gov (United States)

    Vogt, Christina

    Traditionally, women were not welcome in higher education, especially in male-dominated fields. Undoubtedly, women have dramatically increased their enrollments in many once male-only fields, such as law, medicine, and several of the sciences; nevertheless, engineering remains a field where women continue to be underrepresented. This has often been attributed to social barriers in engineering classrooms. However, a new turn of events has been reported: Young women entering engineering may receive higher grades and have a greater tendency to remain than men. To examine what has recently changed, the author applied Bandura's triadic model of reciprocity between environment, self, and behavior. The measured variables included academic integration or discrimination, self-measures of academic self-confidence, engineering self-efficacy, and behaviors taken to self-regulate learning: critical thinking, effort, peer learning, and help seeking. The data revealed that women apply slightly more effort and have slightly less self-efficacy than men. Their academic confidence is nearly equal in almost all areas. Most significantly, many previous gender biases appear diminished, and those that do exist are slight. However, it is recommended that continued efforts be undertaken to attract and retain women in engineering programs.

  7. A Networked Perspective on the Engineering Design Process: At the Intersection of Process and Organisation Architectures

    DEFF Research Database (Denmark)

    Parraguez, Pedro

    projects often fail to be on time, on budget, and meeting specifications. Despite the wealth of process models available, previous approaches have been insufficient to provide a networked perspective that allows the challenging combination of organisational and process complexity to unfold. The lack...... of a networked perspective also has limited the study of the relationships between process complexity and process performance. This thesis argues that to understand and improve design processes, we must look beyond the planned process and unfold the network structure and composition that actually implement...... the process. This combination of process structure—how people and activities are connected—and composition—the functional diversity of the groups participating in the process—is referred to as the actual design process architecture. This thesis reports on research undertaken to develop, apply and test...

  8. Helena Antipoff: razão e sensibilidade na psicologia e na educação

    Directory of Open Access Journals (Sweden)

    Regina Helena de Freitas Campos

    2003-12-01

    Full Text Available ESTE ESTUDO trata da biografia intelectual da psicóloga e educadora Helena Antipoff (1892-1974, enfatizando os diferentes momentos de sua trajetória e a formação progressiva de seu pensamento, com base na perspectiva interacionista da psicologia genebrina e na corrente socioistórica da psicologia soviética. Este pensamento, elaborado no processo de adaptação a culturas diversas em épocas de grandes transformações socioculturais, na Rússia, França, Suíça e Brasil, caracteriza-se pela informação científica avançada e progressista, aliada a um grande sentido prático, e ao compromisso com a convivência democrática.THIS IS A STUDY of the intellectual biography of the psychologist and educator Helena Antipoff (1892-1974, presenting the successive moments of her life and work and the progressive elaboration of her thought, drawing on Genevan interactionism and Soviet social and historical psychology. Her ideas, shaped in the process of adaptation to different cultures in times of great sociocultural transformations, in Russia, France, Switzerland and Brazil, is characterized by advanced and progressivist scientific information, associated to a pragmatic sense and a compromise with democratic conviviality.

  9. Climatic changes in the subtropical Southeast Atlantic: the St. Helena Island Climate Index (1893-1999) [review article

    Science.gov (United States)

    Feistel, Rainer; Hagen, Eberhard; Grant, Keith

    2003-10-01

    The Benguela upwelling system in the subtropical Southeast Atlantic is subject to dramatic interannual fluctuations sometimes termed ‘Benguela Niño’ events. The South Atlantic Anticyclone (SAA) is assumed to be the responsible climatic ‘activity centre’ for the south-east trade winds driving the upwelling processes along the Namibian and South-west African coasts. Air temperature and humidity signals of this region, modulated by upwelling-controlled sea surface temperature (SST), are carried by the trades towards St. Helena Island. The island’s 1893-1999 century-long monthly weather records of temperature, pressure and rainfall have been assembled and homogenized. They exhibit trends for decreasing precipitation (10 mm/100 year), increasing air temperature (0.9 °C/100 year), and decreasing air pressure (0.6 hPa/100 year). Their first empirical orthogonal eigenfunction (EOF) covers 46% of the total variance; its associated temporal coefficient is proposed as a ‘St. Helena Island Climate Index (HIX)’. Austral winter HIX has a 42% correlation with a remotely sensed SST-derived Benguela upwelling index, called intense Benguela upwelling, for the time period 1982-1999. Not yet identified Benguela Niños (1895, 1905, 1912, 1916, 1946) and years of strong Benguela upwelling (1911, 1922, 1967, 1976) are newly suggested by the HIX.

  10. Helena de Eurípides: entre lo cómico y lo trágico

    Directory of Open Access Journals (Sweden)

    Álvaro Sáenz Alfonso

    2017-07-01

    Full Text Available Tanto los críticos antiguos como los románticos alemanes y varios académicos de los últimos dos siglos han identificado ciertas características de la obra de Eurípides que luego pasaron a ser esenciales del género cómico. Helena es una de las tragedias que citan recurrentemente estos críticos que defienden la idea anterior, lo que ha llevado a pensar que esta obra no encaja realmente en el género trágico. Mi intención es resaltar el carácter trágico de Helena por medio de una comparación con Medea. Para lograr esto ofrezco un criterio de identificación de lo trágico en Eurípides. Ancient critics, as well as the German romantics and several scholars from the past two centuries, have identified certain characteristic in Euripides’s work that later became essential to the comic genre. Helen is one of the tragedies that this critics frequently cite in order to defend this position, and this has led to the idea that the work does not really fit within the tragic genre. My intention is to highlight the tragic character of Helen by means of a comparison with Medea. In order to accomplish this, I offer some criteria for classifying what is to be considered tragic in Euripides’s work.

  11. The design of scenario-based training from the resilience engineering perspective: a study with grid electricians.

    Science.gov (United States)

    Saurin, Tarcisio Abreu; Wachs, Priscila; Righi, Angela Weber; Henriqson, Eder

    2014-07-01

    Although scenario-based training (SBT) can be an effective means to help workers develop resilience skills, it has not yet been analyzed from the resilience engineering (RE) perspective. This study introduces a five-stage method for designing SBT from the RE view: (a) identification of resilience skills, work constraints and actions for re-designing the socio-technical system; (b) design of template scenarios, allowing the simulation of the work constraints and the use of resilience skills; (c) design of the simulation protocol, which includes briefing, simulation and debriefing; (d) implementation of both scenarios and simulation protocol; and (e) evaluation of the scenarios and simulation protocol. It is reported how the method was applied in an electricity distribution company, in order to train grid electricians. The study was framed as an application of design science research, and five research outputs are discussed: method, constructs, model of the relationships among constructs, instantiations of the method, and theory building. Concerning the last output, the operationalization of the RE perspective on three elements of SBT is presented: identification of training objectives; scenario design; and debriefing. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. Tissue engineering and microRNAs: future perspectives in regenerative medicine.

    Science.gov (United States)

    Gori, Manuele; Trombetta, Marcella; Santini, Daniele; Rainer, Alberto

    2015-01-01

    Tissue engineering is a growing area of biomedical research, holding great promise for a broad range of potential applications in the field of regenerative medicine. In recent decades, multiple tissue engineering strategies have been adopted to mimic and improve specific biological functions of tissues and organs, including biomimetic materials, drug-releasing scaffolds, stem cells, and dynamic culture systems. MicroRNAs (miRNAs), noncoding small RNAs that negatively regulate the expression of downstream target mRNAs, are considered a novel class of molecular targets and therapeutics that may play an important role in tissue engineering. Herein, we highlight the latest achievements in regenerative medicine, focusing on the role of miRNAs as key modulators of gene expression, stem cell self-renewal, proliferation and differentiation, and eventually in driving cell fate decisions. Finally, we will discuss the contribution of miRNAs in regulating the rearrangement of the tissue microenvironment and angiogenesis, and the range of strategies for miRNA delivery into target cells and tissues. Manipulation of miRNAs is an alternative approach and an attractive strategy for controlling several aspects of tissue engineering, although some issues concerning their in vivo effects and optimal delivery methods still remain uncovered.

  13. The Effect of Curricular Activities on Learner Autonomy: The Perspective of Undergraduate Mechanical Engineering Students

    Science.gov (United States)

    Duarte, M.; Leite, C.; Mouraz, A.

    2016-01-01

    This study researches how first-year engineering students perceived the influence of curricular activities on their own learning autonomy, measured with an adaptation of the Personal Responsibility Orientation to Self-direction in Learning Scale (PRO-SDLS). Participants were questioned to assess the influence of the teacher's role. The results…

  14. Data Management Practices and Perspectives of Atmospheric Scientists and Engineering Faculty

    Science.gov (United States)

    Wiley, Christie; Mischo, William H.

    2016-01-01

    This article analyzes 21 in-depth interviews of engineering and atmospheric science faculty at the University of Illinois Urbana-Champaign (UIUC) to determine faculty data management practices and needs within the context of their research activities. A detailed literature review of previous large-scale and institutional surveys and interviews…

  15. The 7 C's for Creating Living Software: A Research Perspective for Quality-Oriented Software Engineering

    NARCIS (Netherlands)

    Aksit, Mehmet

    2004-01-01

    This article proposes the 7 C's for realizing quality-oriented software engineering practices. All the desired qualities of this approach are expressed in short by the term living software. The 7 C's are: Concern-oriented processes, Canonical models, Composable models, Certifiable models,

  16. The Faculty Perspective on Holistic and Systems Thinking in American and Australian Mechanical Engineering Programmes

    Science.gov (United States)

    Kellam, N. N.; Maher, M. A.; Peters, W. H.

    2008-01-01

    This research effort examined current mechanical engineering educational programmes in America and Australia to determine the degree of holistic, systems thinking of each programme. Faculty from ten American universities and ten Australian universities participated in online surveys and interviews. Resulting data analysis and interpretation…

  17. A Critical Perspective of an Online Hands-On Laboratory Framework for Environmental Engineering Courses

    Directory of Open Access Journals (Sweden)

    Kiran Tota-Maharaj

    2012-07-01

    Full Text Available In environmental engineering education at the undergraduate and postgraduate levels, laboratory exercises are a key component for a holistic learning experience. This project gives an outlook of online learning related research and teaching linked to a lab-based learning environment. The advent of the internet and online resources such as weblogs as a major communication methodology in higher education has showed a great deal of interest. In this project a further step into the realm of providing an online support system for student’s access to remote and distributed laboratory facilities in water and environmental engineering modules has been conducted. The approach demonstrates the feasibility of using an online laboratory effectively which can enable learners to reinforce their learning through hands-on practicals and can also be carried out in a flexible environment. An online weblog related the research and interlinked teaching for water and environmental engineering modules which can be implemented in reforming a lecture-based course for students undertaking water and wastewater engineering subjects

  18. Enhancing Software Engineering Education through Open Source Projects: Four Years of Students' Perspectives

    NARCIS (Netherlands)

    Papadopoulos, P.M.; Stamelos, I.G.; Meiszner, A.

    2015-01-01

    This paper presents the results after four years of running of an instructional method that utilizes free/libre open source software (FLOSS) projects as tools for teaching software engineering in formal education. In the last four academic years, a total of 408 juniors majoring in Informatics (in a

  19. Relationship between self-reported dietary intake and physical activity levels among adolescents: The HELENA study

    Directory of Open Access Journals (Sweden)

    Le Donne Cinzia

    2011-02-01

    Full Text Available Abstract Background Evidence suggests possible synergetic effects of multiple lifestyle behaviors on health risks like obesity and other health outcomes. Therefore it is important to investigate associations between dietary and physical activity behavior, the two most important lifestyle behaviors influencing our energy balance and body composition. The objective of the present study is to describe the relationship between energy, nutrient and food intake and the physical activity level among a large group of European adolescents. Methods The study comprised a total of 2176 adolescents (46.2% male from ten European cities participating in the HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence study. Dietary intake and physical activity were assessed using validated 24-h dietary recalls and self-reported questionnaires respectively. Analyses of covariance (ANCOVA were used to compare the energy and nutrient intake and the food consumption between groups of adolescents with different physical activity levels (1st to 3rd tertile. Results In both sexes no differences were found in energy intake between the levels of physical activity. The most active males showed a higher intake of polysaccharides, protein, water and vitamin C and a lower intake of saccharides compared to less active males. Females with the highest physical activity level consumed more polysaccharides compared to their least active peers. Male and female adolescents with the highest physical activity levels, consumed more fruit and milk products and less cheese compared to the least active adolescents. The most active males showed higher intakes of vegetables and meat, fish, eggs, meat substitutes and vegetarian products compared to the least active ones. The least active males reported the highest consumption of grain products and potatoes. Within the female group, significantly lower intakes of bread and cereal products and spreads were found for those reporting to

  20. Editorial - A critical perspective on geo-engineering for eutrophication management in lakes

    DEFF Research Database (Denmark)

    Lürling, Miquel; Mackay, Eleanor; Reitzel, Kasper

    2016-01-01

    Eutrophication is the primary worldwide water quality issue. Reducing excessive external nutrient loading is the most straightforward action in mitigating eutrophication, but lakes, ponds and reservoirs often show little, if any, signs of recovery in the years following external load reduction....... This is due to internal cycling of phosphorus (P). Geo-engineering, which we can here define as activities intervening with biogeochemical cycles to control eutrophication in inland waters, represents a promising approach, under appropriate conditions, to reduce P release from bed sediments and cyanobacteria...... eutrophication is a system analysis that will reveal the main water and P flows and the biological structure of the waterbody. These site specific traits can be significant confounding factors dictating successful eutrophication management. Geo-engineering techniques, considered collectively, as part of a tool...

  1. A Buddhist perspective on industrial engineering and the design of work.

    Science.gov (United States)

    Lee, Wei-Tau; Blumenthal, James A; Funk, Kenneth H

    2014-06-01

    The modern way of life is highly dependent upon the production of goods by industrial organizations that are in turn dependent upon their workers for their ongoing operations. Even though more than a century has passed since the dawn of the industrial revolution, many dangerous aspects of work, both physical and mental, remain in the workplace today. Using Buddhist philosophical principles, this paper suggests that although many sources of the problem reside within the larger society, the industrial engineer is still a key factor in bettering work and providing a workplace suitable for their fellow workers. Drawing on these insights, we present a number of work design guidelines that industrial engineers who abide by Buddhist principles could practice to help overcome some of the many sufferings produced by modern work.

  2. Solutions to problems with imprecise data—An engineering perspective to generalized uncertainty models

    Science.gov (United States)

    Pannier, S.; Waurick, M.; Graf, W.; Kaliske, M.

    2013-05-01

    The present paper is about data corrupted by both aleatoric and epistemic uncertainty. A unification of randomness, which represents aleatoric uncertainty, and fuzziness, which represents epistemic uncertainty, is dicussed in detail. As a result, the main uncertainty characteristics, i.e., variability, incompleteness and imprecision, can be described. With a focus on engineering problems the aim is to bridge the imprecision of data to the decision making process. Suitable fields of applications are highlighted; remarks on the numerical treatment are given.

  3. Integrating E-Commerce and Social Engineering Perspectives on Trust in Online Communication

    OpenAIRE

    Pfeiffer, Thomas; Kauer, Michaela; Bruder, Ralph

    2012-01-01

    Currently, interpersonal trust in computer-mediated communication is a research topic for e-commerce as well as usable security researchers. While the e-commerce researchers focus on gaining warranted trust, usable security researchers focus on preventing misplaced trust, in order to protect users from social engineering attacks. In this paper an approach to integrate findings and theories from both fields is proposed in order to create a complete model for predicti...

  4. Remote Sensing for Inland Water Quality Monitoring: A U.S. Army Corps of Engineers Perspective

    Science.gov (United States)

    2011-10-01

    programs, such as the U.S. Army Corps of Engineers National Coastal Mapping Program (NCMP), which uses the Compact Hydrographic Airborne Rapid...watershed assessments, Digital Elevation Models ( DEMs ) are used to calculate slope and identify erosion potential. When combined with LULC, DEMs can also...Ohio River basin . In Proc. First Interagency Conf. on Research in the Watersheds, ed. K.G. Renard, S.A. McElroy, W.J. Gburek, H.E. Canfield, and

  5. CONSIDERATIONS ON RENEWABLE ENERGY SOURCES AND THEIR RELATED PERSPECTIVES OFAGRICULTURAL ENGINEERING

    Directory of Open Access Journals (Sweden)

    Ester Foppa-Pedretti

    2010-06-01

    Full Text Available This paper discusses some considerations and advances a number of proposals about the potential of Agricultural Engineering to contribute to the field of renewable energy, with an emphasis on biomass. Several areas for action are identified. First, general education and teaching of students who will go on to become technicians and professionals in the sector of renewable energies, even though the characteristics of the sectors are still fuzzy. Diffusion of the energy culture, a too often neglected aspect that is however indispensable to sustain the overdue penetration of renewable energies in Italy, is an additional area for action. Another critical area, energy planning, is currently viewed mainly as involving the assessment on more or less wide areas of energy consumption and for the scope of replacing fossil resources with renewables to meet some energy requirements. A more complex, overarching issue is energy efficiency, especially of buildings, which should be a mainstay of the planning process but is in fact not so clearly addressed in development plans for renewables. At this same level, all interactions among production sectors should be assessed, to enhance the role of agriculture, one of the new potential energy-producing sectors and one of the possible prospective suppliers of renewable energy for different final users, from households to the service sector and industry. Agricultural Engineering has the skills needed to implement all these different actions. A role for it in advanced research, i.e. biotechnologies, can and should also be envisaged. Its work in the renewable energy sector should closely involve microbiological, genetic, chemical, agronomic, and animal research to define the goals to be pursued and to implement intuitions. In this way, Agricultural Engineering would increasingly be characterized as Biosystems Engineering.

  6. Bone Regeneration Based on Tissue Engineering Conceptions — A 21st Century Perspective

    Science.gov (United States)

    Henkel, Jan; Woodruff, Maria A.; Epari, Devakara R.; Steck, Roland; Glatt, Vaida; Dickinson, Ian C.; Choong, Peter F. M.; Schuetz, Michael A.; Hutmacher, Dietmar W.

    2013-01-01

    The role of Bone Tissue Engineering in the field of Regenerative Medicine has been the topic of substantial research over the past two decades. Technological advances have improved orthopaedic implants and surgical techniques for bone reconstruction. However, improvements in surgical techniques to reconstruct bone have been limited by the paucity of autologous materials available and donor site morbidity. Recent advances in the development of biomaterials have provided attractive alternatives to bone grafting expanding the surgical options for restoring the form and function of injured bone. Specifically, novel bioactive (second generation) biomaterials have been developed that are characterised by controlled action and reaction to the host tissue environment, whilst exhibiting controlled chemical breakdown and resorption with an ultimate replacement by regenerating tissue. Future generations of biomaterials (third generation) are designed to be not only osteoconductive but also osteoinductive, i.e. to stimulate regeneration of host tissues by combining tissue engineering and in situ tissue regeneration methods with a focus on novel applications. These techniques will lead to novel possibilities for tissue regeneration and repair. At present, tissue engineered constructs that may find future use as bone grafts for complex skeletal defects, whether from post-traumatic, degenerative, neoplastic or congenital/developmental “origin” require osseous reconstruction to ensure structural and functional integrity. Engineering functional bone using combinations of cells, scaffolds and bioactive factors is a promising strategy and a particular feature for future development in the area of hybrid materials which are able to exhibit suitable biomimetic and mechanical properties. This review will discuss the state of the art in this field and what we can expect from future generations of bone regeneration concepts. PMID:26273505

  7. Editors' overview perspectives on teaching social responsibility to students in science and engineering.

    Science.gov (United States)

    Zandvoort, Henk; Børsen, Tom; Deneke, Michael; Bird, Stephanie J

    2013-12-01

    Global society is facing formidable current and future problems that threaten the prospects for justice and peace, sustainability, and the well-being of humanity both now and in the future. Many of these problems are related to science and technology and to how they function in the world. If the social responsibility of scientists and engineers implies a duty to safeguard or promote a peaceful, just and sustainable world society, then science and engineering education should empower students to fulfil this responsibility. The contributions to this special issue present European examples of teaching social responsibility to students in science and engineering, and provide examples and discussion of how this teaching can be promoted, and of obstacles that are encountered. Speaking generally, education aimed at preparing future scientists and engineers for social responsibility is presently very limited and seemingly insufficient in view of the enormous ethical and social problems that are associated with current science and technology. Although many social, political and professional organisations have expressed the need for the provision of teaching for social responsibility, important and persistent barriers stand in the way of its sustained development. What is needed are both bottom-up teaching initiatives from individuals or groups of academic teachers, and top-down support to secure appropriate embedding in the university. Often the latter is lacking or inadequate. Educational policies at the national or international level, such as the Bologna agreements in Europe, can be an opportunity for introducing teaching for social responsibility. However, frequently no or only limited positive effect of such policies can be discerned. Existing accreditation and evaluation mechanisms do not guarantee appropriate attention to teaching for social responsibility, because, in their current form, they provide no guarantee that the curricula pay sufficient attention to

  8. Cell-Biomaterial Mechanical Interaction in the Framework of Tissue Engineering: Insights, Computational Modeling and Perspectives

    Science.gov (United States)

    Sanz-Herrera, Jose A.; Reina-Romo, Esther

    2011-01-01

    Tissue engineering is an emerging field of research which combines the use of cell-seeded biomaterials both in vitro and/or in vivo with the aim of promoting new tissue formation or regeneration. In this context, how cells colonize and interact with the biomaterial is critical in order to get a functional tissue engineering product. Cell-biomaterial interaction is referred to here as the phenomenon involved in adherent cells attachment to the biomaterial surface, and their related cell functions such as growth, differentiation, migration or apoptosis. This process is inherently complex in nature involving many physico-chemical events which take place at different scales ranging from molecular to cell body (organelle) levels. Moreover, it has been demonstrated that the mechanical environment at the cell-biomaterial location may play an important role in the subsequent cell function, which remains to be elucidated. In this paper, the state-of-the-art research in the physics and mechanics of cell-biomaterial interaction is reviewed with an emphasis on focal adhesions. The paper is focused on the different models developed at different scales available to simulate certain features of cell-biomaterial interaction. A proper understanding of cell-biomaterial interaction, as well as the development of predictive models in this sense, may add some light in tissue engineering and regenerative medicine fields. PMID:22174660

  9. New perspectives for articular cartilage repair treatment through tissue engineering: A contemporary review

    Science.gov (United States)

    Musumeci, Giuseppe; Castrogiovanni, Paola; Leonardi, Rosalia; Trovato, Francesca Maria; Szychlinska, Marta Anna; Di Giunta, Angelo; Loreto, Carla; Castorina, Sergio

    2014-01-01

    In this paper review we describe benefits and disadvantages of the established methods of cartilage regeneration that seem to have a better long-term effectiveness. We illustrated the anatomical aspect of the knee joint cartilage, the current state of cartilage tissue engineering, through mesenchymal stem cells and biomaterials, and in conclusion we provide a short overview on the rehabilitation after articular cartilage repair procedures. Adult articular cartilage has low capacity to repair itself, and thus even minor injuries may lead to progressive damage and osteoarthritic joint degeneration, resulting in significant pain and disability. Numerous efforts have been made to develop tissue-engineered grafts or patches to repair focal chondral and osteochondral defects, and to date several researchers aim to implement clinical application of cell-based therapies for cartilage repair. A literature review was conducted on PubMed, Scopus and Google Scholar using appropriate keywords, examining the current literature on the well-known tissue engineering methods for the treatment of knee osteoarthritis. PMID:24829869

  10. Scaffolds for Bone Tissue Engineering: State of the art and new perspectives.

    Science.gov (United States)

    Roseti, Livia; Parisi, Valentina; Petretta, Mauro; Cavallo, Carola; Desando, Giovanna; Bartolotti, Isabella; Grigolo, Brunella

    2017-09-01

    This review is intended to give a state of the art description of scaffold-based strategies utilized in Bone Tissue Engineering. Numerous scaffolds have been tested in the orthopedic field with the aim of improving cell viability, attachment, proliferation and homing, osteogenic differentiation, vascularization, host integration and load bearing. The main traits that characterize a scaffold suitable for bone regeneration concerning its biological requirements, structural features, composition, and types of fabrication are described in detail. Attention is then focused on conventional and Rapid Prototyping scaffold manufacturing techniques. Conventional manufacturing approaches are subtractive methods where parts of the material are removed from an initial block to achieve the desired shape. Rapid Prototyping techniques, introduced to overcome standard techniques limitations, are additive fabrication processes that manufacture the final three-dimensional object via deposition of overlying layers. An important improvement is the possibility to create custom-made products by means of computer assisted technologies, starting from patient's medical images. As a conclusion, it is highlighted that, despite its encouraging results, the clinical approach of Bone Tissue Engineering has not taken place on a large scale yet, due to the need of more in depth studies, its high manufacturing costs and the difficulty to obtain regulatory approval. PUBMED search terms utilized to write this review were: "Bone Tissue Engineering", "regenerative medicine", "bioactive scaffolds", "biomimetic scaffolds", "3D printing", "3D bioprinting", "vascularization" and "dentistry". Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Paraffin-based hybrid rocket engines applications: A review and a market perspective

    Science.gov (United States)

    Mazzetti, Alessandro; Merotto, Laura; Pinarello, Giordano

    2016-09-01

    Hybrid propulsion technology for aerospace applications has received growing attention in recent years due to its important advantages over competitive solutions. Hybrid rocket engines have a great potential for several aeronautics and aerospace applications because of their safety, reliability, low cost and high performance. As a consequence, this propulsion technology is feasible for a number of innovative missions, including space tourism. On the other hand, hybrid rocket propulsion's main drawback, i.e. the difficulty in reaching high regression rate values using standard fuels, has so far limited the maturity level of this technology. The complex physico-chemical processes involved in hybrid rocket engines combustion are of major importance for engine performance prediction and control. Therefore, further investigation is ongoing in order to achieve a more complete understanding of such phenomena. It is well known that one of the most promising solutions for overcoming hybrid rocket engines performance limits is the use of liquefying fuels. Such fuels can lead to notably increased solid fuel regression rate due to the so-called "entrainment phenomenon". Among liquefying fuels, paraffin-based formulations have great potentials as solid fuels due to their low cost, availability (as they can be derived from industrial waste), low environmental impact and high performance. Despite the vast amount of literature available on this subject, a precise focus on market potential of paraffins for hybrid propulsion aerospace applications is lacking. In this work a review of hybrid rocket engines state of the art was performed, together with a detailed analysis of the possible applications of such a technology. A market study was carried out in order to define the near-future foreseeable development needs for hybrid technology application to the aforementioned missions. Paraffin-based fuels are taken into account as the most promising segment for market development

  12. Perspective

    DEFF Research Database (Denmark)

    Kussmann, Martin; Morine, Melissa J; Hager, Jörg

    2013-01-01

    We review here the status of human type 2 diabetes studies from a genetic, epidemiological, and clinical (intervention) perspective. Most studies limit analyses to one or a few omic technologies providing data of components of physiological processes. Since all chronic diseases are multifactorial...... and arise from complex interactions between genetic makeup and environment, type 2 diabetes mellitus (T2DM) is a collection of sub-phenotypes resulting in high fasting glucose. The underlying gene-environment interactions that produce these classes of T2DM are imperfectly characterized. Based on assessments...... of the complexity of T2DM, we propose a systems biology approach to advance the understanding of origin, onset, development, prevention, and treatment of this complex disease. This systems-based strategy is based on new study design principles and the integrated application of omics technologies: we pursue...

  13. Mesenchymal and induced pluripotent stem cells: general insights and clinical perspectives

    Directory of Open Access Journals (Sweden)

    Zomer HD

    2015-09-01

    Full Text Available Helena D Zomer,1 Atanásio S Vidane,1 Natalia N Gonçalves,1 Carlos E Ambrósio2 1Department of Surgery, Faculty of Veterinary Medicine and Animal Science, University of São Paulo, São Paulo, SP, Brazil; 2Department of Veterinary Medicine, Faculty of Animal Sciences and Food Engineering, University of São Paulo, Pirassununga, SP, Brazil Abstract: Mesenchymal stem cells have awakened a great deal of interest in regenerative medicine due to their plasticity, and immunomodulatory and anti-inflammatory properties. They are high-yield and can be acquired through noninvasive methods from adult tissues. Moreover, they are nontumorigenic and are the most widely studied. On the other hand, induced pluripotent stem (iPS cells can be derived directly from adult cells through gene reprogramming. The new iPS technology avoids the embryo destruction or manipulation to generate pluripotent cells, therefore, are exempt from ethical implication surrounding embryonic stem cell use. The pre-differentiation of iPS cells ensures the safety of future approaches. Both mesenchymal stem cells and iPS cells can be used for autologous cell transplantations without the risk of immune rejection and represent a great opportunity for future alternative therapies. In this review we discussed the therapeutic perspectives using mesenchymal and iPS cells. Keywords: cell transplantation, cell therapy, iPS, MSC

  14. Geophysical contribution for the study of the Granitic Batholit Santa Helena, southwest of the Amazonian Craton; Contribuicao geofisica ao estudo do Batolito Granitico Santa Helena, sudoeste do Craton Amazonico

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Vanessa Biondo; Mantovani, Marta Silvia Maria, E-mail: van.biondo@gmail.com, E-mail: msmmanto@usp.br [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Astronomia, Geofisica e Ciencias Atmosfericas

    2012-08-15

    The Santa Helena batholith is subject of many controversies concerning its geographical extension, lithological constitution, geochemical characterization and geotectonic setting. This paper aims to contribute for a better understanding of this intrusion using geophysical data (gammaspectrometric and aeromagnetic). These data were obtained through surveys contracted by the Geological Survey of Brazil (CPRM) flown over the study region. Given the compositional variety of the rocks, we analyzed the susceptibility contrast (magnetometry) and distribution of radioelements (K, Th and U, measured by gammaspectrometry) in the batholith. The resulting geophysical signature is different when comparing the northern and southern parts of the body, suggesting the presence of two distinct suites. The boundary between these two suites coincides with the location of an approximately N75 deg W oriented fault system that extends through the batholith. (author)

  15. A perspective: photosynthetic production of fatty acid-based biofuels in genetically engineered cyanobacteria.

    Science.gov (United States)

    Lu, Xuefeng

    2010-01-01

    Biofuels are expected to play a key role in the development of a sustainable, economical and environmentally safe source of energy. Microbes offer great potential for applications in technology based biofuel production. Three fundamental questions need to be addressed in order for the development of microbial synthesis of biofuels to be successful. Firstly, what energy resource platform could be used to make biofuels. Secondly, what type of biofuel is the ideal fuel molecule that should be targeted. Finally, what microbial system could be used to transform energy resources into the targeted biofuel molecules. In this perspective, the potential of using photosynthetic microbes (cyanobacteria in particular) in the solar energy driven conversion of carbon dioxide to fatty acid-based biofuels is explored. Copyright © 2010 Elsevier Inc. All rights reserved.

  16. Reverse engineering mother nature — Shale sedimentology from an experimental perspective

    Science.gov (United States)

    Schieber, Juergen

    2011-06-01

    Experimental study of the sedimentology of shales can take a variety of forms. At its simplest one can experiment with suspensions in a glass jar and try to understand their settling behavior, or one can manipulate mud in a tank or bucket to gain insights into its rheology. This approach was championed over a century ago by Sorby, and the insights gained can be quite profound. More recently, tank and settling tube experiments of animal-sediment interactions, compaction behavior, and sediment unmixing via re-suspension have proven to be highly informative in spite of their simplicity. Flumes can be used to obtain quantitative information about depositional and erosional parameters and to generate fundamental bedforms. In flume experiments, however, it is of critical importance that the flume be designed in a way that flocculated materials move under shear stress conditions that would be reasonable in natural environments. Although much flume work on muds has been conducted by hydraulic engineers, the transfer of that knowledge to sedimentology is hampered by the fact that engineers and sedimentologists are interested in different (though not mutually exclusive) products from such experiments. Engineers and hydrologists are commonly concerned with quantifying fluid flow properties, whereas sedimentogists are particularly interested in the sedimentary products that result from a variety of flow conditions. Recent sedimentologically oriented flume studies have shown that muds can form deposits at flow velocities and shear stresses that would suffice to transport and deposit medium grained sand. Mud suspensions are prone to flocculation and the resulting floccules travel in bedload and form ripples that accrete into beds. The latter finding suggests that many laminated shales were deposited from currents rather than by settling from slow moving or still water. There are many other sedimentary features in shales that can potentially be reproduced in flume studies and in

  17. Historical perspective on advanced drug delivery: how engineering design and mathematical modeling helped the field mature.

    Science.gov (United States)

    Peppas, Nicholas A

    2013-01-01

    We review the early developments in drug delivery from 1960 to 1990 with emphasis on the fundamental aspects of the field and how they shaped the collaboration of pharmaceutical scientists, chemists, biologists, engineers and medical scientists towards the development of advanced drug delivery systems. Emphasis is given on the advances of biomaterials as drug delivery agents and on the use of design equations and mathematical modeling to achieve a wide range of successful systems. Copyright © 2012 Elsevier B.V. All rights reserved.

  18. OCORRÊNCIA DOS PRINCIPAIS INSETOS – PRAGA DA SOJA E SEUS INIMIGOS NATURAIS EM SANTA HELENA DE GOIÁS OCCURRENCE OF SOYBEAN MAIN PESTS AND ITS NATURAL ENEMIES IN SANTA HELENA DE GOIÁS, BRAZIL

    Directory of Open Access Journals (Sweden)

    Antônio Lopes da Silva

    2007-09-01

    Full Text Available

    Tendo em vista a expansão da soja no Estado de Goiás, fez-se necessário o conhecimento das principais pragas desta cultura, bem como de seus inimigos naturais, para que se possa efetuar um controle mais racional e efetivo. Foram feitas coletas nos anos agrícolas de 1977/78, 1978/79 e 1979/80, no Campo Experimental da EMGOPA, em Santa Helena de Goiás. As principais pragas constatadas foram Anticarsia gematalis (Hubner, 1818, Pseudoplusia includens (Walker,1857, Diabrotica speciosa (Germ. , 1824, Cerotoma sp.,Piezodorus guildinii (West. 1837, Euschistus heros (Fabr., 1798 e Nezara viridula (L. , 1758. Quanto aos inimigos naturais, foram constatados Nomuraea rileyi (Farlow Samson, Entomophtora sp., Geocoris spp., Callida sp, Aracnidae, Dermaptera e vírus do tipo Poliedrose nuclear (N.P.V..

    According to the soybean crop expansion in the Goiás State, the necessity of knowledge about the principal soybean pests and their natural enemies were done in order to proceed an effective and rational control about them. Collects were done during the 1977/78, 1978/79 and 1979/80 planting at the Experimental Station in Santa Helena — Goiás. Experimental field (EMGOPA, Goiás. The principal pests were found: Anticarsia gemmatalis (Hubner. 1818, Pseudoplusia includens (Walker, 1857, Diabrotica speciosa (Germ., 1824, Cerotoma sp., Piezodorus guildini (West., 1837, Euschistus heros (Fabr., 1798 and Nezara viridula (L., 1758, and the natural enemies: Nomuraea rileyi (Farlow Samson, Entomophtora sp., Nabis spp, Callida sp, aracnidae, dermaptera and a nuclear polyhedrosis virus (NPV.

  19. Natural marine sponges for bone tissue engineering: The state of art and future perspectives.

    Science.gov (United States)

    Granito, Renata Neves; Custódio, Márcio Reis; Rennó, Ana Claudia Muniz

    2017-08-01

    Marine life and its rich biodiversity provide a plentiful resource of potential new products for the society. Remarkably, marine organisms still remain a largely unexploited resource for biotechnology applications. Among them, marine sponges are sessile animals from the phylum Porifera dated at least from 580 million years ago. It is known that molecules from marine sponges present a huge therapeutic potential in a wide range of applications mainly due to its antitumor, antiviral, anti-inflammatory, and antibiotic effects. In this context, this article reviews all the information available in the literature about the potential of the use of marine sponges for bone tissue engineering applications. First, one of the properties that make sponges interesting as bone substitutes is their structural characteristics. Most species have an efficient interconnected porous architecture, which allows them to process a significant amount of water and facilitates the flow of fluids, mimicking an ideal bone scaffold. Second, sponges have an organic component, the spongin, which is analogous to vertebral collagen, the most widely used natural polymer for tissue regeneration. Last, osteogenic properties of marine sponges is also highlighted by their mineral content, such as biosilica and other compounds, that are able to support cell growth and to stimulate bone formation and mineralization. This review focuses on recent studies concerning these interesting properties, as well as on some challenges to be overcome in the bone tissue engineering field. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1717-1727, 2017. © 2016 Wiley Periodicals, Inc.

  20. Perspectives on engineering strategies for improving biofuel production from microalgae--a critical review.

    Science.gov (United States)

    Ho, Shih-Hsin; Ye, Xiaoting; Hasunuma, Tomohisa; Chang, Jo-Shu; Kondo, Akihiko

    2014-12-01

    Although the potential for biofuel production from microalgae via photosynthesis has been intensively investigated, information on the selection of a suitable operation strategy for microalgae-based biofuel production is lacking. Many published reports describe competitive strains and optimal culture conditions for use in biofuel production; however, the major impediment to further improvements is the absence of effective engineering strategies for microalgae cultivation and biofuel production. This comprehensive review discusses recent advances in understanding the effects of major environmental stresses and the characteristics of various engineering operation strategies on the production of biofuels (mainly biodiesel and bioethanol) using microalgae. The performances of microalgae-based biofuel-producing systems under various environmental stresses (i.e., irradiance, temperature, pH, nitrogen depletion, and salinity) and cultivation strategies (i.e., fed-batch, semi-continuous, continuous, two-stage, and salinity-gradient) are compared. The reasons for variations in performance and the underlying theories of the various production strategies are also critically discussed. The aim of this review is to provide useful information to facilitate development of innovative and feasible operation technologies for effectively increasing the commercial viability of microalgae-based biofuel production. Copyright © 2014 Elsevier Inc. All rights reserved.

  1. Genome engineering via TALENs and CRISPR/Cas9 systems: challenges and perspectives

    KAUST Repository

    Mahfouz, Magdy M.

    2014-09-24

    The ability to precisely modify genome sequence and regulate gene expression patterns in a site-specific manner holds much promise in plant biotechnology. Genome-engineering technologies that enable such highly specific and efficient modification are advancing with unprecedented pace. Transcription activator-like effectors (TALEs) provide customizable DNA-binding modules designed to bind to any sequence of interest. Thus, TALEs have been used as a DNA targeting module fused to functional domains for a variety of targeted genomic and epigenomic modifications. TALE nucleases (TALENs) have been used with much success across eukaryotic species to edit genomes. Recently, clustered regularly interspaced palindromic repeats (CRISPRs) that are used as guide RNAs for Cas9 nuclease-specific digestion has been introduced as a highly efficient DNA-targeting platform for genome editing and regulation. Here, we review the discovery, development and limitations of TALENs and CRIPSR/Cas9 systems as genome-engineering platforms in plants. We discuss the current questions, potential improvements and the development of the next-generation genome-editing platforms with an emphasis on producing designer plants to address the needs of agriculture and basic plant biology.

  2. Genome engineering via TALENs and CRISPR/Cas9 systems: challenges and perspectives.

    Science.gov (United States)

    Mahfouz, Magdy M; Piatek, Agnieszka; Stewart, Charles Neal

    2014-10-01

    The ability to precisely modify genome sequence and regulate gene expression patterns in a site-specific manner holds much promise in plant biotechnology. Genome-engineering technologies that enable such highly specific and efficient modification are advancing with unprecedented pace. Transcription activator-like effectors (TALEs) provide customizable DNA-binding modules designed to bind to any sequence of interest. Thus, TALEs have been used as a DNA targeting module fused to functional domains for a variety of targeted genomic and epigenomic modifications. TALE nucleases (TALENs) have been used with much success across eukaryotic species to edit genomes. Recently, clustered regularly interspaced palindromic repeats (CRISPRs) that are used as guide RNAs for Cas9 nuclease-specific digestion has been introduced as a highly efficient DNA-targeting platform for genome editing and regulation. Here, we review the discovery, development and limitations of TALENs and CRIPSR/Cas9 systems as genome-engineering platforms in plants. We discuss the current questions, potential improvements and the development of the next-generation genome-editing platforms with an emphasis on producing designer plants to address the needs of agriculture and basic plant biology. © 2014 Society for Experimental Biology, Association of Applied Biologists and John Wiley & Sons Ltd.

  3. Application of Collagen Scaffold in Tissue Engineering: Recent Advances and New Perspectives

    Directory of Open Access Journals (Sweden)

    Chanjuan Dong

    2016-02-01

    Full Text Available Collagen is the main structural protein of most hard and soft tissues in animals and the human body, which plays an important role in maintaining the biological and structural integrity of the extracellular matrix (ECM and provides physical support to tissues. Collagen can be extracted and purified from a variety of sources and offers low immunogenicity, a porous structure, good permeability, biocompatibility and biodegradability. Collagen scaffolds have been widely used in tissue engineering due to these excellent properties. However, the poor mechanical property of collagen scaffolds limits their applications to some extent. To overcome this shortcoming, collagen scaffolds can be cross-linked by chemical or physical methods or modified with natural/synthetic polymers or inorganic materials. Biochemical factors can also be introduced to the scaffold to further improve its biological activity. This review will summarize the structure and biological characteristics of collagen and introduce the preparation methods and modification strategies of collagen scaffolds. The typical application of a collagen scaffold in tissue engineering (including nerve, bone, cartilage, tendon, ligament, blood vessel and skin will be further provided. The prospects and challenges about their future research and application will also be pointed out.

  4. A Perspective on Smart Process Manufacturing Research Challenges for Process Systems Engineers

    Directory of Open Access Journals (Sweden)

    Ian David Lockhart Bogle

    2017-04-01

    Full Text Available The challenges posed by smart manufacturing for the process industries and for process systems engineering (PSE researchers are discussed in this article. Much progress has been made in achieving plant- and site-wide optimization, but benchmarking would give greater confidence. Technical challenges confronting process systems engineers in developing enabling tools and techniques are discussed regarding flexibility and uncertainty, responsiveness and agility, robustness and security, the prediction of mixture properties and function, and new modeling and mathematics paradigms. Exploiting intelligence from big data to drive agility will require tackling new challenges, such as how to ensure the consistency and confidentiality of data through long and complex supply chains. Modeling challenges also exist, and involve ensuring that all key aspects are properly modeled, particularly where health, safety, and environmental concerns require accurate predictions of small but critical amounts at specific locations. Environmental concerns will require us to keep a closer track on all molecular species so that they are optimally used to create sustainable solutions. Disruptive business models may result, particularly from new personalized products, but that is difficult to predict.

  5. Preliminary assessment report for Fort William Henry Harrison, Montana Army National Guard, Helena, Montana. Installation Restoration Program

    Energy Technology Data Exchange (ETDEWEB)

    DuWaldt, J.; Meyer, T.

    1993-07-01

    This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at a Montana Army National Guard (MTARNG) property near Helena, Montana. Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a basis for establishing corrective actions in response to releases of hazardous substances. The principal objective of the PA is to characterize the site accurately and determine the need for further action by examining site activities, quantities of hazardous substances present, and potential pathways by which contamination could affect public health and the environment. This PA satisfies, for the Fort William Henry Harrison property, requirements of the Department of Defense Installation Restoration Program.

  6. Modelagem comportamental pela técnica da preferência declarada aplicada aos agricultores de Santa Helena (PR

    Directory of Open Access Journals (Sweden)

    Leoveraldo Curtarelli

    2006-06-01

    Full Text Available Este trabalho trata do comportamento dos agricultores frente às opções de investir ou não em terras, de forma a modelar como estes tomam as decisões sobre seus investimentos, utilizando-se da Técnica da Preferência Declarada. A pesquisa centrou-se nos agricultores de Santa Helena (PR, proprietários de áreas iguais ou superiores a 30 (trinta alqueires. A coleta dos dados baseou-se em entrevistas com uma amostra de 40 agricultores. Como principais resultados, os atributos mais significativos para o modelo foram: "finalidade do investimento"; "condições de pagamentos" e "capital". O grupo pesquisado apresenta-se propenso a realizar investimentos em terras devido a: segurança financeira; possibilidade de pagamento a prazo; e opção de utilizar capital próprio para honrar as obrigações.This work analyses the behaviour of farmers as to the options of investing or not investing in buying lands, and aimed to know as farmers make their decisions on investments with use of the Technique of Declared Preference. The research based on farmers of Santa Helena (PR, proprietors of areas equal to or higher than 72 (seventy-two hectares. Data collection was based on interviews with a sample of 40 farmers. As principal results, the most significant attributes for the model were: "purpose of the investment"; "conditions of payments" and "funds". Therefore, the investigated group presents a tendency to accomplish their investments in owning lands due to: financial security, possibilities to pay in instalments and option of using their own funds to cover the debt.

  7. Breakfast consumption and CVD risk factors in European adolescents: the HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) Study.

    Science.gov (United States)

    Hallström, Lena; Labayen, Idoia; Ruiz, Jonatan R; Patterson, Emma; Vereecken, Carine A; Breidenassel, Christina; Gottrand, Frédéric; Huybrechts, Inge; Manios, Yannis; Mistura, Lorenza; Widhalm, Kurt; Kondaki, Katerina; Moreno, Luis A; Sjöström, Michael

    2013-07-01

    To examine the association between breakfast consumption and CVD risk factors in European adolescents. Cross-sectional. Breakfast consumption was assessed by the statement ‘I often skip breakfast’ and categorized into ‘consumer’, ‘occasional consumer’ and ‘skipper’. Blood pressure, weight, height, waist circumference, skinfold thickness, total cholesterol (TC), HDL cholesterol (HDL-C), LDL cholesterol (LDL-C), TAG, insulin and glucose were measured and BMI, TC:HDL-C, LDL-C:HDL-C and homeostasis model assessment–insulin resistance index (HOMA-IR) were calculated. The European Union-funded HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) Study. European adolescents, aged 12?50–17?49 years, from ten cities within the HELENA study (n 2929, n 925 with blood sample, 53% females). In males, significant differences across breakfast consumption category (‘consumer’, ‘occasional consumer’ and ‘skipper’) were seen for age, BMI, skinfold thickness, waist circumference, cardiorespiratory fitness, systolic and diastolic blood pressures, TC:HDL-C, LDL-C:HDL-C, glucose, insulin, HOMA-IR and LDL-C; in females, for cardiorespiratory fitness, skinfold thickness, BMI, insulin and HOMA-IR. In overweight/obese males significant differences were also seen for TC and LDL-C, whereas no differences were observed in non-overweight males or in females regardless of weight status. Our findings among European adolescents confirm previous data indicating that adolescents who regularly consume breakfast have lower body fat content. The results also show that regular breakfast consumption is associated with higher cardiorespiratory fitness in adolescents, and with a healthier cardiovascular profile, especially in males. Eating breakfast regularly may also negate somewhat the effect of excess adiposity on TC and LDL-C, especially in male adolescents.

  8. In vitro engineering of microbial enzymes with multifarious applications: prospects and perspectives.

    Science.gov (United States)

    Joshi, Swati; Satyanarayana, Tulasi

    2015-01-01

    The discovery of a novel enzyme from a microbial source takes anywhere between months to years, and therefore, there has been an immense interest in modifying the existing microbial enzymes to suit the present day needs of the industry. The redesigning of industrially useful enzymes for improving their performance has become a challenge because bioinformatics databases have been revealing new facts on a day-to-day basis. Modification of the existing enzymes has become a trend for fine tuning of biocatalysts in the biotech industry. Hydrolases are employed in pharmaceutical, biofuel, detergent, food and feed industries that significantly contribute to the global annual revenue, and therefore, the emphasis has been on engineering them. Although a large data is accumulating on making alterations in microbial enzymes, there is a lack of definite information on redesigning industrial enzymes. This review focuses on the recent developments in improving the characteristics of various biotechnologically important enzymes. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Interactive granular computations in networks and systems engineering a practical perspective

    CERN Document Server

    Jankowski, Andrzej

    2017-01-01

    The book outlines selected projects conducted under the supervision of the author. Moreover, it discusses significant relations between Interactive Granular Computing (IGrC) and numerous dynamically developing scientific domains worldwide, along with features characteristic of the author’s approach to IGrC. The results presented are a continuation and elaboration of various aspects of Wisdom Technology, initiated and developed in cooperation with Professor Andrzej Skowron. Based on the empirical findings from these projects, the author explores the following areas: (a) understanding the causes of the theory and practice gap problem (TPGP) in complex systems engineering (CSE);(b) generalizing computing models of complex adaptive systems (CAS) (in particular, natural computing models) by constructing an interactive granular computing (IGrC) model of networks of interrelated interacting complex granules (c-granules), belonging to a single agent and/or to a group of agents; (c) developing methodologies based ...

  10. CRISPR/Cas9-mediated genome engineering of CHO cell factories: application and perspectives

    DEFF Research Database (Denmark)

    Lee, Jae Seong; Grav, Lise Marie; Lewis, Nathan E.

    2015-01-01

    repeat (CRISPR)/CRISPR-associated protein 9 (Cas9) system enables rapid,easy and efficient engineering of mammalian genomes. It has a wide range of applications frommodification of individual genes to genome-wide screening or regulation of genes. Facile genomeediting using CRISPR/Cas9 empowers...... researchers in the CHO community to elucidate the mechanisticbasis behind high level production of proteins and product quality attributes of interest. Inthis review, we describe the basis of CRISPR/Cas9-mediated genome editing and its applicationfor development of next generation CHO cell factories while...... highlighting both future perspectivesand challenges. As one of the main drivers for the CHO systems biology era, genome engineeringwith CRISPR/Cas9 will pave the way for rational design of CHO cell factories....

  11. NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 51: Workplace communications skills and the value of communications and information-use skills instruction: Engineering students' perspectives

    Science.gov (United States)

    Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

    1995-01-01

    Studies indicate that communications and information-related activities take up a substantial portion of an engineer's work week; therefore, effective communications and information use skills are one of the key engineering competencies that recent graduates of engineering programs are expected to possess. Feedback from industry rates communications and information use skills of entry-level engineers low. Missing from current discussions of communications and information use skills and competencies for engineering students is a clear explanation from the professional engineering community about what constitutes 'acceptable and desirable communications and information norms' within that community. To gather adequate and generalizable data about communications and information skills instruction and to provide a student perspective on the communications skills of engineers, we undertook a national study of aerospace engineering students in March 1993. The study included questions about the importance of certain communications and information skills to professional success, the instruction students had received in these skills, and perceived helpfulness of the instruction. Selected results from the study study are reported in this paper.

  12. CROSS-CULTURAL COMMUNICATION BEHAVIOUR IN INTERNATIONAL ENGINEERING PROJECTS: CHINESE AND SOUTH AFRICAN PERSPECTIVES

    Directory of Open Access Journals (Sweden)

    D. Jiang

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Past researchers and practitioners have realised that merely developing scheduling techniques is not enough to ensure successful engineering projects, and that communication behaviour is also a critical cultural issue for achieving project success. In this article, the communication behaviour of Chinese project managers is assessed in a cultural context, and the effect of communication behaviour on five project activities (project communication, negotiation, conflict solving, contract process, and team building is evaluated. This is an empirical study that makes use of surveys to explore the cultural differences between Chinese and South African engineering project managers in respect of their communication behaviour, and the effects of those differences on the five project management activities in the construction industry. There are significant differences between Chinese and South African project managers in their communication behaviour in three project activities. However, there seems to be no significant difference between their communication behaviours in the contract process.

    AFRIKAANSE OPSOMMING: Navorsers en praktiserende projekbestuurders het reeds tot die gevolgtrekking gekom dat skeduleringstegnieke op hulle eie nie voldoende is om suksesvolle projekte te verseker nie. Kommunikasiegedrag is ook ’n kritieke kulturele faktor wat kan bydra tot suksesvolle projekte. In hierdie artikel word die kommunikasiegedrag van Chinese projekbestuurders in ’n kulturele konteks geassesseer en die uitwerking van die kommunikasiegedrag op vyf projekbestuursaktiwiteite (projekkommunikasie, onder-handeling, konflikhantering, kontrakproses en spanbou word geëvalueer. Hierdie is ’n empiriese studie waar steekproewe gebruik word om kulturele verskille betreffende kommunikasiegedrag tussen Chinese en Suid-Afrikaanse projekbestuurders, en die uitwerking daarvan op die vyf projebestuursaktiwiteite in die konstruksiebedryf te

  13. Data Management Practices and Perspectives of Atmospheric Scientists and Engineering Faculty

    Directory of Open Access Journals (Sweden)

    Christie Wiley

    2016-12-01

    Full Text Available This article analyzes 21 in-depth interviews of engineering and atmospheric science faculty at the University of Illinois Urbana-Champaign (UIUC to determine faculty data management practices and needs within the context of their research activities. A detailed literature review of previous large-scale and institutional surveys and interviews revealed that researchers have a broad awareness of data-sharing mandates of federal agencies and journal publishers and a growing acceptance, with some concerns, of the value of data-sharing. However, the disciplinary differences in data management needs are significant and represent a set of challenges for libraries in setting up consistent and successful services. In addition, faculty have not yet significantly changed their data management practices to conform with the mandates. The interviews focused on current research projects and funding sources, data types and format, the use of disciplinary and institutional repositories, data-sharing, their awareness of university library data management and preservation services, funding agency review panel experiences, and struggles or challenges with managing research data. In general, the interviews corroborated the trends identified in the literature. One clear observation from the interviews was that scientists and engineers take a holistic view of the research lifecycle and treat data as one of many elements in the scholarly communication workflow. Data generation, usage, storage, and sharing are an integrated aspect of a larger scholarly workflow, and are not necessarily treated as a separate entity. Acknowledging this will allow libraries to develop programs that better integrate data management support into scholarly communication instruction and training.

  14. Towards high performance computing for molecular structure prediction using IBM Cell Broadband Engine - an implementation perspective

    Science.gov (United States)

    2010-01-01

    Background RNA structure prediction problem is a computationally complex task, especially with pseudo-knots. The problem is well-studied in existing literature and predominantly uses highly coupled Dynamic Programming (DP) solutions. The problem scale and complexity become embarrassingly humungous to handle as sequence size increases. This makes the case for parallelization. Parallelization can be achieved by way of networked platforms (clusters, grids, etc) as well as using modern day multi-core chips. Methods In this paper, we exploit the parallelism capabilities of the IBM Cell Broadband Engine to parallelize an existing Dynamic Programming (DP) algorithm for RNA secondary structure prediction. We design three different implementation strategies that exploit the inherent data, code and/or hybrid parallelism, referred to as C-Par, D-Par and H-Par, and analyze their performances. Our approach attempts to introduce parallelism in critical sections of the algorithm. We ran our experiments on SONY Play Station 3 (PS3), which is based on the IBM Cell chip. Results Our results suggest that introducing parallelism in DP algorithm allows it to easily handle longer sequences which otherwise would consume a large amount of time in single core computers. The results further demonstrate the speed-up gain achieved in exploiting the inherent parallelism in the problem and also elicits the advantages of using multi-core platforms towards designing more sophisticated methodologies for handling a fairly long sequence of RNA. Conclusion The speed-up performance reported here is promising, especially when sequence length is long. To the best of our literature survey, the work reported in this paper is probably the first-of-its-kind to utilize the IBM Cell Broadband Engine (a heterogeneous multi-core chip) to implement a DP. The results also encourage using multi-core platforms towards designing more sophisticated methodologies for handling a fairly long sequence of RNA to predict

  15. Civil Engineering Applications of Ground Penetrating Radar: Research Perspectives in COST Action TU1208

    Science.gov (United States)

    Pajewski, Lara; Benedetto, Andrea; Loizos, Andreas; Slob, Evert; Tosti, Fabio

    2013-04-01

    Ground Penetrating Radar (GPR) is a safe, non-destructive and non-invasive imaging technique that can be effectively used for advanced inspection of composite structures and for diagnostics affecting the whole life-cycle of civil engineering works. GPR provides high resolution images of structures and subsurface through wide-band electromagnetic waves. It can be employed for the surveying of roads, pavements, bridges, tunnels, for detecting underground cavities and voids, for utility sensing, for the inspection of buildings, reinforced concrete and pre-cast concrete structures, for geotechnical investigation, in foundation design, as well as for several other purposes. Penetration and resolution of GPR depend primarily on the transmitting frequency of the equipment, the antenna characteristics, the electrical properties of the ground or of the surveyed material, and the contrasting electrical properties of the targets with respect to the surrounding medium. Generally there is a direct relationship between the transmitter frequency and the resolution that can be obtained; conversely there is an inverse relationship between frequency and penetration depth. GPR works best in dry ground environments, but can also give good results in wet, saturated materials; it does not work well in saline conditions, in high-conductivity media and through dense clays which limit signal penetration. Different approaches can be employed in the processing of collected GPR data. Once data have been processed, they still have to be analysed. This is a challenging problem, since interpretation of GPR radargrams is typically non-intuitive and considerable expertise is needed. In the presence of a complex scenario, an accurate electromagnetic forward solver is a fundamental tool for the validation of data interpretation. It can be employed for the characterization of scenarios, as a preliminary step that precedes a survey, or to gain a posteriori a better understanding of measured data. It

  16. Management tools for R&D engineering projects: Coordination perspective for large international consortium (NeXOS)

    Science.gov (United States)

    Castro, Ayoze; Memè, Simone; Quevedo, Eduardo; Waldmann, Christoph; Pearlman, Jay; Delory, Eric; Llinás, Octavio

    2017-04-01

    NeXOS is a cross-functional and multidisciplinary project funded under the EU FP7 Program, which involves 21 organizations from six different European countries. They all have different backgrounds, interests, business models and perspectives. To be successful, NeXOS applied an international recognized management methodology tailored to the specific project's environment and conditions, with an explicit structure based on defined roles and responsibilities for the people involved in the project and a means for effective communication between them (Fig.1). The project, divided in four different stages of requirements, design, integration, validation and demonstration, allows a clearer monitor of its progress, a comparison of the level of achievement in accordance with the plan and an earlier detection of problems/issues, leading to implementation of less disruptive, but still effective corrective actions. NeXOS is following an ambitious plan to develop innovative sensor systems with a high degree of modularity and interoperability, starting with requirements definition through validation and demonstration phase. To make this integrative approach possible, a management development strategy has been used incorporating systems engineering methods (Fig.2). Although this is standard practice in software development and large scale systems such as aircraft production, it is still new in the ocean hardware business and therefore NeXOS was a test case for this development concept. The question is one of scale as ocean observation systems are typically built on the scale of a few with co-located teams. With a system of diverse technologies (optical, acoustic, platform interfaces), there are cultural differences that must be bridged. The greatest challenge is in the implementation and the willingness of different teams to work with an engineering process, which may help ultimate system integration, but may place additional burdens on individual participants. This presentation

  17. Perspectives for studying glyphosate and AMPA impact on soil ecosystem engineering in farming soils from Argentina.

    Science.gov (United States)

    Domínguez, Anahí; Pía Rodríguez, María; Ortiz, Carolina Elizabeth; Camilo Bedano, José

    2017-04-01

    Ecosystem engineers are organisms that modulate the availability of resources to other species by causing physical state changes in biotic or abiotic materials. In the agricultural soils of the Pampa region of Argentina, earthworms are undoubtedly the key soil ecosystem engineers. Indeed, earthworms are involved in building and maintenance of porosity through bioturbation and burrowing; comminution, selection and or activation of microflora activities and in soil formation, by bioturbation, cast deposition and particle selection. Attending to the importance of such processes to preserve the soil capacity to sustain crop productivity, the promotion of suitable habitats for earthworm communities, has become a main goal for sustainable agriculture. However, in Argentine Pampas, the impact of the huge amount of pesticides currently spread on farming soils, on the earthworm biology and ecology, is scarcely considered when agricultural managements practices are selected. In fact, more than 250 million liters of glyphosate-based herbicides are spread by year in the farming soils of Argentina. Glyphosate has a relative short half-life, but one of the major breakdown products, the aminomethylphosphonic acid (AMPA), is persistent in soils. We tested its toxicity1 on the earthworm Eisenia andrei, and we found no mortality but growth and reproductive disorders. However, E. andrei is seldom found in agricultural lands. Indeed, for the last 8 years, we have sampled an important variety of agricultural soils, representing the most important farming systems used in Argentina, and we never found Eisenia spp. but 13 earthworm species: 8 exotic from Lumbricidae and 5 natives from Acanthodrilidae, Glossoscolecidae and Ocnerodrilidae families. However, the ecotoxicological effect of glyphosate has been detailed studied only in three of the mentioned exotic species, and only in four studies2,3,4,5. Such a few studies and a few species indicates a real lack of accurate knowledge about

  18. A system engineer's Perspective on Human Errors For a more Effective Management of Human Factors in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yong-Hee; Jang, Tong-Il; Lee, Soo-Kil [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2007-10-15

    The management of human factors in nuclear power plants (NPPs) has become one of the burden factors during their operating period after the design and construction period. Almost every study on the major accidents emphasizes the prominent importance of the human errors. Regardless of the regulatory requirements such as Periodic Safety Review, the management of human factors would be a main issue to reduce the human errors and to enhance the performance of plants. However, it is not easy to find out a more effective perspective on human errors to establish the engineering implementation plan for preventing them. This paper describes a system engineer's perspectives on human errors and discusses its application to the recent study on the human error events in Korean NPPs.

  19. Compact Combustor Integrated (CI) with Compressor and Turbine for Perspective Turbojet Engine

    Science.gov (United States)

    Strokin, V. N.; Volkov, S. A.; Ljashenko, V. P.; Popov, V. I.; Startzev, A. N.; Nigmatullin, R. Z.; Shilova, T. V.; Belikov, U. V.

    2017-11-01

    For several years, CIAM has conducted comprehensive work on the development the combustor integrated (CI) with air swirling. This project involved an integrated development of three components: diffuser, combustion chamber and nozzle guide vanes of turbine to reduce their length and, respectively, the length of the engine and obtain high performance elements with low emissions of harmful substances. The new frontal device was proposed for CI combustor. The design optimization of this type combustor was conducted in the compartments and in a full-size combustion chamber. It was shown the possibility of obtaining high combustion efficiency and low NOx emissions at a short length on cruise condition. By a simplified model of the frontal device it was shown experimentally that the proposed device provided a lighting-up and flame spreading in a wide range of equivalence ratio ER (ER > 0.014) at idling. It was shown that short vane diffuser with moderate swirling ensured high parameters of the combustion chamber. The use of residual swirling of the combustion products at the exit of combustor allows reducing the size, or the number of nozzle guide vanes of the turbine. In General, the use of the swirling of the air stream gives a possibility of total length reduction for all three elements by about 20 – 25 %.

  20. Macedonian journal of chemistry and chemical engineering: open journal systems--editor's perspective.

    Science.gov (United States)

    Zdravkovski, Zoran

    2014-01-01

    The development and availability of personal computers and software as well as printing techniques in the last twenty years have made a profound change in the publication of scientific journals. Additionally, the Internet in the last decade has revolutionized the publication process to the point of changing the basic paradigm of printed journals. The Macedonian Journal of Chemistry and Chemical Engineering in its 40-year history has adopted and adapted to all these transformations. In order to keep up with the inevitable changes, as editor-in-chief I felt my responsibility was to introduce an electronic editorial managing of the journal. The choice was between commercial and open source platforms, and because of the limited funding of the journal we chose the latter. We decided on Open Journal Systems, which provided online submission and management of all content, had flexible configuration--requirements, sections, review process, etc., had options for comprehensive indexing, offered various reading tools, had email notification and commenting ability for readers, had an option for thesis abstracts and was installed locally. However, since there is limited support it requires a moderate computer knowledge/skills and effort in order to set up. Overall, it is an excellent editorial platform and a convenient solution for journals with a low budget or journals that do not want to spend their resources on commercial platforms or simply support the idea of open source software.

  1. A network engineering perspective on probing and perturbing cognition with neurofeedback.

    Science.gov (United States)

    Bassett, Danielle S; Khambhati, Ankit N

    2017-05-01

    Network science and engineering provide a flexible and generalizable tool set to describe and manipulate complex systems characterized by heterogeneous interaction patterns among component parts. While classically applied to social systems, these tools have recently proven to be particularly useful in the study of the brain. In this review, we describe the nascent use of these tools to understand human cognition, and we discuss their utility in informing the meaningful and predictable perturbation of cognition in combination with the emerging capabilities of neurofeedback. To blend these disparate strands of research, we build on emerging conceptualizations of how the brain functions (as a complex network) and how we can develop and target interventions or modulations (as a form of network control). We close with an outline of current frontiers that bridge neurofeedback, connectomics, and network control theory to better understand human cognition. © 2017 The Authors. Annals of the New York Academy of Sciences published by Wiley Periodicals Inc. on behalf of The New York Academy of Sciences.

  2. The effect of curricular activities on learner autonomy: the perspective of undergraduate mechanical engineering students

    Science.gov (United States)

    Duarte, M.; Leite, C.; Mouraz, A.

    2016-01-01

    This study researches how first-year engineering students perceived the influence of curricular activities on their own learning autonomy, measured with an adaptation of the Personal Responsibility Orientation to Self-direction in Learning Scale (PRO-SDLS). Participants were questioned to assess the influence of the teacher's role. The results indicate that learners' characteristics (motivation and self-efficacy) contribute more to learner autonomy (LA) than the teaching-learning transaction (control and initiative), as in the original PRO-SDLS validation. The most autonomous learners presented higher values in all LA components and dimensions, but the differences were greater in motivation and initiative. The participants with higher LA were not as dependent on the teacher, regarding assessment, the completion of classroom tasks and deadlines. Regardless of the degree of autonomy in learning, all participants viewed teachers as the main source of information. Therefore, LA plays an important role in teaching activities planning. Suggestions for adjustments and more flexible learning scenarios are formulated.

  3. Integrating societal perspectives and values for improved stewardship of a coastal ecosystem engineer

    Directory of Open Access Journals (Sweden)

    Steven B. Scyphers

    2014-09-01

    of oyster decline could garner additional support for stewardship initiatives. Collectively, the societal, economic, and biophysical complexities of the northern Gulf of Mexico oyster SES illustrate the need and public support for developing more comprehensive management schemes for exploited ecosystem engineers.

  4. Influence of parental socio-economic status on diet quality of European adolescents: results from the HELENA study.

    Science.gov (United States)

    Béghin, L; Dauchet, L; De Vriendt, Tineke; Cuenca-García, M; Manios, Y; Toti, E; Plada, M; Widhalm, K; Repasy, J; Huybrechts, I; Kersting, M; Moreno, L A; Dallongeville, J

    2014-04-14

    Diet quality is influenced by socio-economic and geographical factors. The present study sought to assess whether adolescents' diet quality is affected by their parents' socio-economic status and whether the relationship between these factors is similar in northern and southern Europe. Data collected in the Healthy Lifestyle in Europe by Nutrition in Adolescence (HELENA) study in eight European countries were analysed. Dietary intake data were recorded via repeated 24 h recalls (using specifically developed HELENA Dietary Intake Assessment Tool software) and converted into an adolescent-specific Diet Quality Index (DQI-AM). Socio-economic status was estimated through parental educational level (Par-Educ-Lev) and parental occupation level (Par-Occ-Lev) as reported by the adolescents in a specific questionnaire. The DQI-AM data were then analysed as a function of Par-Educ-Lev and Par-Occ-Lev in northern European countries (Austria, Belgium, France, Germany and Sweden) and southern European countries (Greece, Italy and Spain). We studied a total of 1768 adolescents (age 14.7 (SD 1.3) years; percentage of girls: 52.8%; 1135 and 633 subjects from northern and southern Europe, respectively). On average, the DQI-AM score was higher in southern Europe than in northern Europe (69.1 (SD 0.1) v. 60.4 (SD 2.8), respectively; P < 0.001; Δ = 12.6%). The DQI was positively correlated with both paternal and maternal Par-Educ-Lev. However, this association was more pronounced in northern Europe than in southern Europe (P interaction = 0.004 for the mother and 0.06 for the father). The DQI was also positively correlated with Par-Occ-Lev (all P trends < 0.01), but this correlation was independent of the geographical area (P interaction = 0.51 for the mother and 0.50 for the father). In conclusion, Par-Educ-Lev and Par-Occ-Lev are associated with diet quality in adolescents in Europe. However, this association differs between northern Europe and southern Europe.

  5. Notion Of Artificial Labs Slow Global Warming And Advancing Engine Studies Perspectives On A Computational Experiment On Dual-Fuel Compression-Ignition Engine Research

    Directory of Open Access Journals (Sweden)

    Tonye K. Jack

    2017-06-01

    Full Text Available To appreciate clean energy applications of the dual-fuel internal combustion engine D-FICE with pilot Diesel fuel to aid public policy formulation in terms of present and future benefits to the modern transportation stationary power and promotion of oil and gas green- drilling the brief to an engine research team was to investigate the feasible advantages of dual-fuel compression-ignition engines guided by the following concerns i Sustainable fuel and engine power delivery ii The requirements for fuel flexibility iii Low exhausts emissions and environmental pollution iv Achieving low specific fuel consumption and economy for maximum power v The comparative advantages over the conventional Diesel engines vi Thermo-economic modeling and analysis for the optimal blend as basis for a benefitcost evaluation Planned in two stages for reduced cost and fast turnaround of results - initial preliminary stage with basic simple models and advanced stage with more detailed complex modeling. The paper describes a simplified MATLAB based computational experiment predictive model for the thermodynamic combustion and engine performance analysis of dual-fuel compression-ignition engine studies operating on the theoretical limited-pressure cycle with several alternative fuel-blends. Environmental implications for extreme temperature moderation are considered by finite-time thermodynamic modeling for maximum power with predictions for pollutants formation and control by reaction rates kinetics analysis of systematic reduced plausible coupled chemistry models through the NCN reaction pathway for the gas-phase reactions classes of interest. Controllable variables for engine-out pollutants emissions reduction and in particular NOx elimination are identified. Verifications and Validations VampV through Performance Comparisons were made using a clinical approach in selection of StrokeBore ratios greater-than and equal-to one amp88051 low-to-high engine speeds and medium

  6. Negative Impact of Employment on Engineering Student Time Management, Time to Degree, and Retention: Faculty, Administrator, and Staff Perspectives

    Science.gov (United States)

    Tyson, Will

    2012-01-01

    Interviews with faculty, administrators, staff, and students at four engineering programs reveal the role of undergraduate student employment on retention and timely degree completion among engineering students. Dueling narratives reveal how student approaches to earning an engineering degree differ greatly from faculty, administrator, and staff…

  7. The hELENa project - II. Abundance distribution trends of early-type galaxies: from dwarfs to giants

    Science.gov (United States)

    Sybilska, A.; Kuntschner, H.; van de Ven, G.; Vazdekis, A.; Falcón-Barroso, J.; Peletier, R. F.; Lisker, T.

    2018-02-01

    In this second paper of The role of Environment in shaping Low-mass Early-type Nearby galaxies (hELENa) series we study [Mg/Fe] abundance distribution trends of early-type galaxies observed with the SAURON integral field unit, spanning a wide range in mass and local environment densities: 20 low-mass early-types (dEs) of Sybilska et al. (2017) and 258 massive early types (ETGs) of the ATLAS3D project, all homogeneously reduced and analyzed. We show that the [Mg/Fe] ratios scale with velocity dispersion (σ) at fixed [Fe/H] and that they evolve with [Fe/H] along similar paths for all early-types, grouped in bins of increasing local and global σ, as well as the second velocity moment Vrms, indicating a common inside-out formation pattern. We then place our dEs on the [Mg/Fe] vs. [Fe/H] diagram of Local Group galaxies and show that dEs occupy the same region and show a similar trend line slope in the diagram as the high-metallicity stars of the Milky Way and the Large Magellanic Cloud. This finding extends the similar trend found for dwarf spheroidal vs. dwarf irregular galaxies and supports the notion that dEs have evolved from late-type galaxies that have lost their gas at a point of their evolution, which likely coincided with them entering denser environments.

  8. Interannual variation in the composition of the assemblages of medusae and ctenophores in St. Helena Bay, Southern Benguela Ecosystem

    Directory of Open Access Journals (Sweden)

    Emmanuelle Buecher

    2000-12-01

    Full Text Available The assemblages of medusae and ctenophores were examined from samples collected each winter from St Helena Bay, over the 10-year period 1988-1997. A total of 50 hydromedusae, 1 scyphozoan and 2 ctenophore species were identified from 243 samples. Although the data set is characterised by great interannual variability, two main assemblages could be identified each year. These were characterised by either holoplanktonic medusae (e.g. Liriope tetraphylla, Aglaura hemistoma or meroplanktonic medusae (e.g. Mitrocomella millardae, Chrysaora hysoscella and ctenophores (e.g. Pleurobrachia pileus. The holoplanktonic medusae were typical of samples at the southern edge of the Bay, and were positively associated with both depth and temperature. Their abundances tended to increase during warm years (1992, 1993 and 1997 as warm surface water flooded the Bay. The meroplanktonic medusae and ctenophores were typical of samples collected within the Bay, and the density of species tended to be negatively correlated with temperature and depth. In spite of the eurythermal nature of the meroplanktonic species, they were more common during cold years (1990 and 1995. This paper represents the first Bay-wide, interannual study of any zooplankton group, and contributes important base line information on the structure of regional pelagic assemblages.

  9. Resting Heart Rate Is Not a Good Predictor of a Clustered Cardiovascular Risk Score in Adolescents: The HELENA Study.

    Directory of Open Access Journals (Sweden)

    Augusto César Ferreira de Moraes

    Full Text Available Resting heart rate (RHR reflects sympathetic nerve activity a significant association between RHR and all-cause and cardiovascular mortality has been reported in some epidemiologic studies.To analyze the predictive power and accuracy of RHR as a screening measure for individual and clustered cardiovascular risk in adolescents. The study comprised 769 European adolescents (376 boys participating in the HELENA cross-sectional study (2006-2008 were included in this study. Measurements on systolic blood pressure, HOMA index, triglycerides, TC/HDL-c, VO2máx and the sum of four skinfolds were obtained, and a clustered cardiovascular disease (CVD risk index was computed. The receiver operating characteristics curve was applied to calculate the power and accuracy of RHR to predict individual and clustered CVD risk factors.RHR showed low accuracy for screening CVD risk factors in both sexes (range 38.5%-54.4% in boys and 45.5%-54.3% in girls. Low specificity's (15.6%-19.7% in boys; 18.1%-20.0% in girls were also found. Nevertheless, the sensitivities were moderate-to-high (61.4%-89.1% in boys; 72.9%-90.3% in girls.RHR is a poor predictor of individual CVD risk factors and of clustered CVD and the estimates based on RHR are not accurate. The use of RHR as an indicator of CVD risk in adolescents may produce a biased screening of cardiovascular health in both sexes.

  10. Connecting pigment composition and dissolved trace elements to phytoplankton population in the southern Benguela Upwelling zone (St. Helena Bay)

    Science.gov (United States)

    Das, Supriyo Kumar; Routh, Joyanto; Roychoudhury, Alakendra N.; Veldhuis, Marcel J. W.; Ismail, Hassan E.

    2017-12-01

    Rich in upwelled nutrients, the Southern Benguela is one of the most productive ecosystems in the world ocean. However, despite its ecological significance the role of trace elements influencing phytoplankton population in the Southern Benguela Upwelling System (SBUS) has not been thoroughly investigated. Here, we report pigment composition, macronutrients (nitrate, phosphate and silicate) and concentrations of dissolved Cd, Co, Fe and Zn during late austral summer and winter seasons in 2004 to understand the relationship between the selected trace elements and phytoplankton biomass in St. Helena Bay (SHB), which falls within the southern boundary of the SBUS. Chlorophyll a concentrations indicate higher phytoplankton biomass associated with high primary production during late summer in SHB where high diatom population is inferred from the presence of fucoxanthin. Diminished phytoplankton biomass and a shift from diatoms to dinoflagellates as the dominant phytoplankton taxa are indicated by diagnostic pigments during late winter. Dissolved trace elements (Cd, Co and Zn) and macronutrients play a significant role in phytoplankton biomass, and their distribution is affected by biological uptake and export of trace elements. Continuous uptake of Zn by diatoms may cause an onset of Zn depletion leading to a period of extended diatom proliferation during late summer. Furthermore, the transition from diatom to dinoflagellate dominated phytoplankton population is most likely facilitated by depletion of trace elements (Cd and Co) in the water column.

  11. Nutritional knowledge in European adolescents: results from the HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) study.

    Science.gov (United States)

    Sichert-Hellert, Wolfgang; Beghin, Laurent; De Henauw, Stefaan; Grammatikaki, Evangelia; Hallström, Lena; Manios, Yannis; Mesana, María I; Molnár, Dénes; Dietrich, Sabine; Piccinelli, Raffaela; Plada, Maria; Sjöström, Michael; Moreno, Luis A; Kersting, Mathilde

    2011-12-01

    To build up sufficient knowledge of a 'healthy diet'. Here, we report on the assessment of nutritional knowledge using a uniform method in a large sample of adolescents across Europe. A cross-sectional study. The European multicentre HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) study conducted in 2006-2007 in ten cities in Austria, Belgium, France, Germany, Greece (one inland and one island city), Hungary, Italy, Spain and Sweden. A total of 3546 adolescents (aged 12·5-17·5 years) completed a validated nutritional knowledge test (NKT). Socio-economic variables and anthropometric data were considered as potential confounders. NKT scores increased with age and girls had higher scores compared with boys (62% v. 59%; P Nutritional knowledge was modest in our sample. Interventions should be focused on the lower SES segments of the population. They should be initiated at a younger age and should be combined with environmental prevention (e.g. healthy meals in school canteens).

  12. Extranjeras, de Helena Taberna: el ojo crítico del documental frente a la inmigración

    Directory of Open Access Journals (Sweden)

    María Caballero Wangüemert

    2014-06-01

    Full Text Available “Cine e inmigración” es una iniciativa loable por muchos motivos y, desde aquí, quiero agradecérsela al coordinador, Guido Rings. Mi conexión con el cine, tras muchos años como fascinada espectadora del séptimo arte, derivó en la puesta en marcha de una asignatura de libre configuración, “Femenino plural: mujer, cine y literatura” que, con sus más y sus menos, llevo impartiendo doce años en la Universidad de Sevilla. Me ha dado muchas satisfacciones acercarme al alumno que descubre otro modo de ver/leer cine y me enseña a hacerlo, y conectar con el mundo de críticos, guionistas y directoras que, año tras año, pasan por mi asignatura transmitiendo su experiencia. En este contexto, me tentó Extranjeras (2003, un documental de 75 minutos en el que Helena Taberna trata de plasmar la vida cotidiana de quienes así son consideradas, un documental, en definitiva, sobre Madrid en femenino: femenina la cámara, femeninas las protagonistas.

  13. Software engineering

    CERN Document Server

    Sommerville, Ian

    2010-01-01

    The ninth edition of Software Engineering presents a broad perspective of software engineering, focusing on the processes and techniques fundamental to the creation of reliable, software systems. Increased coverage of agile methods and software reuse, along with coverage of 'traditional' plan-driven software engineering, gives readers the most up-to-date view of the field currently available. Practical case studies, a full set of easy-to-access supplements, and extensive web resources make teaching the course easier than ever.

  14. Governing Engineering

    DEFF Research Database (Denmark)

    Buch, Anders

    2012-01-01

    Most people agree that our world face daunting problems and, correctly or not, technological solutions are seen as an integral part of an overall solution. But what exactly are the problems and how does the engineering ‘mind set’ frame these problems? This chapter sets out to unravel dominant...... perspectives in challenge per-ception in engineering in the US and Denmark. Challenge perception and response strategies are closely linked through discursive practices. Challenge perceptions within the engineering community and the surrounding society are thus critical for the shaping of engineering education...... and the engineering profession. Through an analysis of influential reports and position papers on engineering and engineering education the chapter sets out to identify how engineering is problematized and eventually governed. Drawing on insights from governmentality studies the chapter strives to elicit the bodies...

  15. Governing Engineering

    DEFF Research Database (Denmark)

    Buch, Anders

    2011-01-01

    Abstract: Most people agree that our world faces daunting problems and, correctly or not, technological solutions are seen as an integral part of an overall solution. But what exactly are the problems and how does the engineering ‘mind set’ frame these problems? This chapter sets out to unravel...... dominant perspectives in challenge perception in engineering in the US and Denmark. Challenge perception and response strategies are closely linked through discursive practices. Challenge perceptions within the engineering community and the surrounding society are thus critical for the shaping...... of engineering education and the engineering profession. Through an analysis of influential reports and position papers on engineering and engineering education the chapter sets out to identify how engineering is problematized and eventually governed. Drawing on insights from governmentality studies the chapter...

  16. Perspectives of best Practices for Learning Gender-Inclusive Science: Influences of Extracurricular Science for Gifted Girls and Electrical Engineering for Women

    Science.gov (United States)

    Wood, Shaunda L.

    Gifted girls in elementary school must follow the set curriculum, but their choices of extracurricular activities may indicate future subject preferences. This study attempted to explore the perceptions of gifted girls regarding how the family, home, and school environments influenced their choices to take extracurricular science classes. A mixed methodology was adopted: qualitative, to understand the girls' perceptions of influence, and quantitative, to measure their attitudes toward science. Influential factors identified in this study highlight fun as occurring with the highest frequency and four emergent factors: doubt, traditional sex roles, boredom, and group work. In addition, findings from a focused case study of a graduate electrical engineer are interwoven with the girls' perspectives of science. The varying ages and experiences with science of the participants provide interesting views. This study adds knowledge to the field of science education, specifically on withingender differences of gifted girls and women in engineering.

  17. Labour perspectives of engineering degrees in the European Higher Education Area (EHEA): a case of study in the University of Cordoba (Spain)

    Science.gov (United States)

    Taguas, E. V.; Redel, M. D.; Pérez, R.; Peña, A.

    2009-04-01

    The Bologna process is reaching its final stages and is causing controversy among students. The adaptation of European universities to the European Higher Education Area (EHEA) entails not only the modification of curricular programmes and the nomenclature and duration of degrees, but also the incorporation of new teaching strategies aimed at ensuring that students acquire transversal skills and aptitudes and at increasing student participation in the teaching-learning process. A number of surveys have been carried out during the last few courses among students doing degrees in engineering (Industrial Engineering, Agronomy Engineering and Forestry Engineering). These surveys include questions on their knowledge of Bologna process, its advantages and drawbacks, their opinion about optional masters or doctorate degrees, what perspectives their degrees have on the labour market and suggestions for improvement. Although the different degrees showed notable differences, the content of EHEA is well-known by less than 30% of students, while 40% of them state they know about their perspectives on the labour market. The main advantages of EHEA were related to the improvement of practical knowledge in the subjects, the recognition of degrees in Europe and wider working opportunities. The main drawbacks pointed out were worse and shorter training periods, higher costs and fiercer competition between different degrees. In addition, they suggested that the new degrees are better adjusted to the demands of the labour market. 60% and 40% of them, respectively, approved of Masters degrees and PhDs. These features should be taken into account to organize and improve the contents of the degrees as well as to involve the students in the future of University education.

  18. Teaching Design in the First Years of a Traditional Mechanical Engineering Degree: Methods, Issues and Future Perspectives

    Science.gov (United States)

    Silva, Arlindo; Fontul, Mihail; Henriques, Elsa

    2015-01-01

    Engineering design is known as an answer to an ill-defined problem. As any answer to an ill-defined problem, it can never be completely right or absolutely wrong. The methods that universities use to teach engineering design, as a consequence of this, suffer from the same fate. However, the accumulated experience with the "chalk and…

  19. The hELENa project - I. Stellar populations of early-type galaxies linked with local environment and galaxy mass

    Science.gov (United States)

    Sybilska, A.; Lisker, T.; Kuntschner, H.; Vazdekis, A.; van de Ven, G.; Peletier, R.; Falcón-Barroso, J.; Vijayaraghavan, R.; Janz, J.

    2017-09-01

    We present the first in a series of papers in The role of Environment in shaping Low-mass Early-type Nearby galaxies (hELENa) project. In this paper, we combine our sample of 20 low-mass early types (dEs) with 258 massive early types (ETGs) from the ATLAS3D survey - all observed with the SAURON integral field unit - to investigate early-type galaxies' stellar population scaling relations and the dependence of the population properties on local environment, extended to the low-σ regime of dEs. The ages in our sample show more scatter at lower σ values, indicative of less massive galaxies being affected by the environment to a higher degree. The shape of the age-σ relations for cluster versus non-cluster galaxies suggests that cluster environment speeds up the placing of galaxies on the red sequence. While the scaling relations are tighter for cluster than for the field/group objects, we find no evidence for a difference in average population characteristics of the two samples. We investigate the properties of our sample in the Virgo cluster as a function of number density (rather than simple clustrocentric distance) and find that dE ages correlate with the local density such that galaxies in regions of lower density are younger, likely because they are later arrivals to the cluster or have experienced less pre-processing in groups, and consequently used up their gas reservoir more recently. Overall, dE properties correlate more strongly with density than those of massive ETGs, which was expected as less massive galaxies are more susceptible to external influences.

  20. Science, Technology, Engineering, Math (STEM) in Higher Education from the Perspective of Female Students: An Institutional Ethnography

    Science.gov (United States)

    Parson, Laura J.

    A persistent disadvantage for females is systemically embedded in Science, Technology, Engineering, and Math (STEM) education in postsecondary institutions. As a result, undergraduate women majoring in STEM fields face a uniquely difficult path; yet, for the most part, recommendations made and supported in the literature have focused on recruitment of women to STEM fields or on ways to make women more successful and comfortable in their STEM major. These recommendations have so far proved to be insufficient to remedy a gender gap and serve to replicate the existing male hierarchy. In order to truly make the STEM classroom one in which women are welcome and comfortable and to challenge the existing social and scientific systems, it is necessary to explore and understand the social and political implications embedded within teaching and learning choices. This institutional ethnography addresses that gap. The purpose of this study was to uncover and describe the institutional practices of STEM education at a Midwest research university (MRU) from the standpoint of female undergraduate students. Using the framework of feminist standpoint theory, this study explored the everyday "work" of female undergraduate STEM students to provide a unique perspective on the STEM education teaching and learning environment. Data collection began with in-depth interviews with female undergraduate math and physics students. As the institutional processes shaping undergraduate participant experiences were identified, subsequent data collection included classroom observations, additional interviews with students and faculty, and analysis of the texts that mediate these processes (e.g., syllabi and student handbooks). Data analysis followed Carspecken's process of ethnographic data analysis that began with low-level coding, followed by high-level coding, and concluded by pulling codes together through the creation of themes. Analysis of data led to three key findings. First, undergraduate

  1. Architectural Engineers

    DEFF Research Database (Denmark)

    Petersen, Rikke Premer

    engineering is addresses from two perspectives – as an educational response and an occupational constellation. Architecture and engineering are two of the traditional design professions and they frequently meet in the occupational setting, but at educational institutions they remain largely estranged....... The paper builds on a multi-sited study of an architectural engineering program at the Technical University of Denmark and an architectural engineering team within an international engineering consultancy based on Denmark. They are both responding to new tendencies within the building industry where...... the role of engineers and architects increasingly overlap during the design process, but their approaches reflect different perceptions of the consequences. The paper discusses some of the challenges that design education, not only within engineering, is facing today: young designers must be equipped...

  2. Natural Resources Management on Corps of Engineers Water Resources Development Projects: Practices, Challenges, and Perspectives on the Future

    National Research Council Canada - National Science Library

    Kasual, Richard

    1998-01-01

    Natural resources management on U.S. Army Corps of Engineers water resources development projects was documented from the responses of management personnel to a detailed questionnaire mailed to a stratified random sample of projects...

  3. A New Paradigm of Engineering Education for the 21st Century:Perspectives of Rose-Hulman Institute of Technology

    Science.gov (United States)

    Western, Arthur; Stamper, Richard

    Strategic initiatives for engineering education in the next decade as planned by the Rose-Hulman Institute of Technology are presented. The Rose-Hulman Institute of Technology is a private college in the United States that specializes in undergraduate engineering, mathematics and science education. The initiatives are in response to broad changes in the practice of the engineering profession in its modern global context. The initiatives comprise five strategic thrust areas and five programmatic themes. The thrust areas are: Energy and Environment; Health and Safety; Transportation; Materials; and Information, Computation, and Communication. The programmatic themes are: Excellence in Education; International Awareness; Business Awareness;Service Learning; and Life-long Learning. The objective of these initiatives is to prepare students to meet the challenges of the 21st century and to serve as leaders in society.

  4. Reliability and validity of the Adolescent Stress Questionnaire in a sample of European adolescents--the HELENA study.

    Science.gov (United States)

    De Vriendt, Tineke; Clays, Els; Moreno, Luis A; Bergman, Patrick; Vicente-Rodriguez, Germán; Nagy, Eniko; Dietrich, Sabine; Manios, Yannis; De Henauw, Stefaan

    2011-09-23

    Since stress is hypothesized to play a role in the etiology of obesity during adolescence, research on associations between adolescent stress and obesity-related parameters and behaviours is essential. Due to lack of a well-established recent stress checklist for use in European adolescents, the study investigated the reliability and validity of the Adolescent Stress Questionnaire (ASQ) for assessing perceived stress in European adolescents. The ASQ was translated into the languages of the participating cities (Ghent, Stockholm, Vienna, Zaragoza, Pecs and Athens) and was implemented within the HELENA cross-sectional study. A total of 1140 European adolescents provided a valid ASQ, comprising 10 component scales, used for internal reliability (Cronbach α) and construct validity (confirmatory factor analysis or CFA). Contributions of socio-demographic (gender, age, pubertal stage, socio-economic status) characteristics to the ASQ score variances were investigated. Two-hundred adolescents also provided valid saliva samples for cortisol analysis to compare with the ASQ scores (criterion validity). Test-retest reliability was investigated using two ASQ assessments from 37 adolescents. Cronbach α-values of the ASQ scales (0.57 to 0.88) demonstrated a moderate internal reliability of the ASQ, and intraclass correlation coefficients (0.45 to 0.84) established an insufficient test-retest reliability of the ASQ. The adolescents' gender (girls had higher stress scores than boys) and pubertal stage (those in a post-pubertal development had higher stress scores than others) significantly contributed to the variance in ASQ scores, while their age and socio-economic status did not. CFA results showed that the original scale construct fitted moderately with the data in our European adolescent population. Only in boys, four out of 10 ASQ scale scores were a significant positive predictor for baseline wake-up salivary cortisol, suggesting a rather poor criterion validity of the

  5. Nutrition and lifestyle in european adolescents: the HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) study.

    Science.gov (United States)

    Moreno, Luis A; Gottrand, Frédéric; Huybrechts, Inge; Ruiz, Jonatan R; González-Gross, Marcela; DeHenauw, Stefaan

    2014-09-01

    Adolescence is a critical period, because major physical and psychologic changes occur during a very short period of time. Changes in dietary habits may induce different types of nutritional disorders and are likely to track into adulthood. The aim of this review is to describe the key findings related to nutritional status in European adolescents participating in the HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) study. We performed a cross-sectional study in 3528 (1845 females) adolescents aged 12.5–17.5 y. Birth weight was negatively associated with abdominal fat mass in adolescents and serum leptin concentrations (in female adolescents), providing additional evidence for a programming effect of birth weight on energy homeostasis control. Breakfast consumption was associated with lower body fat content and healthier cardiovascular profile. Adolescents eat half of the recommended amount of fruit and vegetables and less than two-thirds of the recommended amount of milk and milk products but consume more meat and meat products, fats, and sweets than recommended. For beverage consumption, sugar-sweetened beverages, sweetened milk, low-fat milk, and fruit juice provided the highest amount of energy. Although the intakes of saturated fatty acids (FAs) and salt were high, the intake of polyunsaturated FAs was low. Adolescents spent, on average, 9 h/d of their waking time (66–71% and 70–73% of the registered time in boys and girls, respectively) in sedentary activities. Factors associated with adolescents’ sedentary behavior included the following: 1) age; 2) media availability in the bedroom; 3) sleeping time; 4) breakfast consumption; and 5) season. Sedentary time was also associated with cardiovascular risk factors and bone mineral content. In European adolescents, deficient concentrations were identified for plasma folate (15%), vitamin D (15%), pyridoxal 5′-phosphate (5%), β-carotene (25%), and vitamin E (5%). Scientists and public

  6. Hydrological engineering in the 21st century - current situation and future perspectives; Wasserkraft im 21. Jahrhundert - Bestandsaufnahme und Zukunftsperspektiven. Beitraege

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    Content with following topics: Hydropower in Europe, general conditions and licensing, hydropower use in case of deregulation, Chance and market from the point of view of manufacturers, as futural perspectives of ''Green Power Generation''.(GL) [German] Inhalt mit folgenden Schwerpunkten: Wasserkraft in Europa, Rahmenbedingungen und Genehmigungen, Wasserkraftnutzung im liberalisierten Strommarkt, Chance und Markt aus Herstellersicht, sowie Zukunftsperspektiven der Erzeugung des ''Gruenen Stroms''.(GL)

  7. !Claro, se puede! Critical resilience: A critical race perspective on resilience in the baccalaureate achievement of Latino/a engineering and life science students

    Science.gov (United States)

    Cruz, Gary Anthony

    An under representation of Latino/as in the fields of science, technology, engineering and math (STEM) still persists. In Rising Above the Gathering Storm, the National Academies sounded an alarm in response to data indicating a "troubling decline" in the number of U.S. citizens trained to become scientists and engineers at a time when the number of technical jobs is outpacing the rate of the U.S. workforce. The shrinking technical talent pipeline threatens the country's future in technology innovation, energy alternatives, national security, and education. This study purported to contextualize resilience and discern the cultural capital and persistence behaviors of STEM Latino/a students succeeding in two adverse environments---higher education and science and engineering. Through a critical race perspective the student cuentos were thematically analyzed. Student narratives were then triangulated with the narrative of the researcher---a Mexican American, first-generation college student, who pursued a life science bachelor's degree through the two institutions in this study. The theoretical framework was guided by Critical Race Theory, Resiliency, Persistence Theory, and Social Construction of Technology. The study consisted of a pilot survey and narrative inquiry. The survey contained pilot questions on the use and perception of information technologies in STEM education. The narrative inquiry was guided by critical race that enabled both positionality and storytelling through narratives and counter-narratives. Twenty-two Latino/a graduating seniors majoring in the biological sciences or engineering/engineering technology at a Hispanic-Serving Institution (HSI) and a Predominantly-White Institution (PWI) in Texas were recruited. The narratives of these students were collected through one-time, semi-structured interviews during the last semester of their studies. Results from the study indicate that these Latino/a STEM students are conscious of their ethnicity

  8. A systems engineering perspective on eHealth implementations 'efficiency and effectiveness: a case study involving suppliers'

    CSIR Research Space (South Africa)

    Fanta, GB

    2014-10-01

    Full Text Available The implementation of eHealth systems in South Africa did not generate the expected output. This paper investigates the impact of system engineering management (SEM) practices on the efficiency and effectiveness of eHealth system in two South...

  9. Understanding quality requirements engineering in contract-based projects from the perspective of software architects: an exploratory study

    NARCIS (Netherlands)

    Daneva, Maya; Herrmann, Andrea; Buglione, Luigi; Mistrik, Ivan; Bahsoon, Rami; Eeles, Peter; Roshandel, Roshanak; Stal, Michael

    2014-01-01

    This chapter discusses how software architects from 21 European project organizations cope with quality requirements (QRs) in large, contract-based systems delivery projects. It reports on the roles that architects played in QRs engineering, their interactions with other project roles, the specific

  10. Employment and Earnings of International Science and Engineering Graduates of U.S. Universities: A Comparative Perspective

    Science.gov (United States)

    Campbell, Throy A.; Adamuti-Trache, Maria; Bista, Krishna

    2018-01-01

    International students represent a large percentage of the student population in science, technology, engineering, and mathematics (STEM) programs at American colleges and universities. Although graduates of these programs are identified as having high employability, productivity, and earnings in the 21st-century job market, there is limited…

  11. Glycosylation Engineering

    DEFF Research Database (Denmark)

    Clausen, Henrik; Wandall, Hans H.; Steentoft, Catharina

    2017-01-01

    Knowledge of the cellular pathways of glycosylation across phylogeny provides opportunities for designing glycans via genetic engineering in a wide variety of cell types including bacteria, fungi, plant cells, and mammalian cells. The commercial demand for glycosylation engineering is broad......, including production of biological therapeutics with defined glycosylation (Chapter 57). This chapter describes how knowledge of glycan structures and their metabolism (Parts I–III of this book) has led to the current state of glycosylation engineering in different cell types. Perspectives for rapid...

  12. Integrated Model of Balanced Score Card and Technology Component Measurement: A Strategic Perspective in Indonesia Biofuel Engineering Development

    Directory of Open Access Journals (Sweden)

    Sukardi Sukardi

    2010-08-01

    Full Text Available The development of biofuel as an ecofriendly energy alternative has a value chain problem in alignment policies between related parties. Identifiying its alignment, we make a strategic mapping by building integrated base scorecard, so the strategic target in the subsequent perspective layer can be developed more realistically. Structural Equation Modeling (SEM modeling was used to examine horizontal connection validity to show strong relation between objectives strategy, and it will be measured of constructed component on the internal process by Technology Coefficient Contribution indexes.

  13. Challenges of river basin management: Current status of, and prospects for, the River Danube from a river engineering perspective.

    Science.gov (United States)

    Habersack, Helmut; Hein, Thomas; Stanica, Adrian; Liska, Igor; Mair, Raimund; Jäger, Elisabeth; Hauer, Christoph; Bradley, Chris

    2016-02-01

    In the Danube River Basin multiple pressures affect the river system as a consequence of river engineering works, altering both the river hydrodynamics and morphodynamics. The main objective of this paper is to identify the effects of hydropower development, flood protection and engineering works for navigation on the Danube and to examine specific impacts of these developments on sediment transport and river morphology. Whereas impoundments are characterised by deposition and an excess of sediment with remobilisation of fine sediments during severe floods, the remaining five free flowing sections of the Danube are experiencing river bed erosion of the order of several centimetres per year. Besides the effect of interruption of the sediment continuum, river bed degradation is caused by an increase in the sediment transport capacity following an increase in slope, a reduction of river bed width due to canalisation, prohibition of bank erosion by riprap or regressive erosion following base level lowering by flood protection measures and sediment dredging. As a consequence, the groundwater table is lowered, side-arms are disconnected, instream structures are lost and habitat quality deteriorates affecting the ecological status of valuable floodplains. The lack of sediments, together with cutting off meanders, leads also to erosion of the bed of main arms in the Danube Delta and coastal erosion. This paper details the causes and effects of river engineering measures and hydromorphological changes for the Danube. It highlights the importance of adopting a basin-wide holistic approach to river management and demonstrates that past management in the basin has been characterised by a lack of integration. To-date insufficient attention has been paid to the wide-ranging impacts of river engineering works throughout the basin: from the basin headwaters to the Danube Delta, on the Black Sea coast. This highlights the importance of new initiatives that seek to advance knowledge

  14. Prevalência de enteroparasitoses na população do município de Maria Helena, Paraná Prevalence of enteroparasitosis in the population of Maria Helena, Paraná State

    Directory of Open Access Journals (Sweden)

    Simone Aparecida dos Santos

    2010-05-01

    Full Text Available O estudo epidemiológico dos parasitas intestinais tem por objetivo determinar as principais doenças e seus respectivos agentes etiológicos que se encontram distribuídos por todo o mundo, de forma endêmica ou epidêmica. O objetivo desta pesquisa foi avaliar a prevalência de infecção por enteroparasitoses, em qual idade há sua maior prevalência, relacionando a infecção com a idade, o sexo e a região em que a pessoa vive, no município de Maria Helen (PR. A coleta de dados foi realizada de junho de 2004 a maio de 2006. Foram analisadas 431 amostras de fezes pelo método de sedimentação espontânea e centrífugo-flutuação. A prevalência de enteroparasitoses foi de 16%, sendo os enteroparasitas mais frequentes: Endolimax nana (6,5%, Entamoeba coli (3,5%, Giardia intestinalis (6,3%, Ascaris lumbricoides (1,4%, Strongyloides stercoralis (0,7%, Entrobius vermicularis (0,7%, Ancilostomídeo (0,2%, Entamoeba hystolitica e Taenia sp (0,2%. O poliparasitismo foi detectado em 3,2% das amostras. A faixa etária que apresentou maior prevalência foi de zero a nove anos, porém não houve diferença estatística entre os fatores analisados, uma vez que p>0,05. Diante desses resultados, conclui-se que o município apresenta características similares em relação à zona rural e urbana.The epidemiological study on intestinal parasites has the purpose of determining the main diseases and their respective etiologic agents, which are endemically or epidemically spread worldwide. The aim of this study was to evaluate the enteroparasitosis infection prevalence, in which age group they prevail, relating the infection with age, gender, and the region in which the person lives, in the city of Maria Helena - PR. Data collection was performed from June of 2004 to May of 2006. 431 samples of feces were analyzed through the spontaneous sedimentation and centrifugal fluctuation methods. The enteroparasitosis prevalence was of 16%, being the most frequent

  15. Abuso e repressão: fibras do mesmo fio na infância das meninas de Helena Parente Cunha

    Directory of Open Access Journals (Sweden)

    Lílian Almeida de Oliveira Lima

    2015-01-01

    Full Text Available The narrative production of Brazilian writer Helena Parente Cunha is marked by the presence of female characters and the questioning of this universe, shaking structures and hegemonic standards. Young and adult women are the main characters of her plots, but the girls also take part in the complaint about the pain and the oppression imposed by culturally - established patterns. In this article, short stories of the books Os provisórios , Cem mentiras de verdade and Falas e falares are discussed, analyzing the situations of abuse and repression to which children are su bjected, and the demarcations of gender present there. These characters are subjected to a series of oversights that undermines the idealized notion of childhood as a lost paradise. In the course of analysis the ideas of Neil Postman about narrowing the li mits that differentiate adults and children are used, as well as the notion of „privatization of childhood‟, pointed out by Jacinto Sarmento.

  16. Simulated carbon and nitrogen flows of the planktonic food web during an upwelling relaxation period in St Helena Bay (southern Benguela ecosystem) [review article

    Science.gov (United States)

    Touratier, Franck; Field, John G.; Moloney, Coleen L.

    2003-07-01

    A vertically resolved ecosystem model is developed to simulate the dynamics of the pelagic food web in St Helena Bay during a representative period of relaxation after an upwelling event. The proposed model aims at coupling three biogeochemical cycles (carbon, nitrogen and silicon), using several recently developed concepts of the stoichiometric approach. A consequence of this approach is that important qualitative aspects are introduced, such as indicators of phytoplankton physiological state or variable food C:N ratios. For instance, the sedimentation and exudation rates for phytoplankton vary according to physiological state. An attempt is made to parameterize and simulate the diel cycles for vertical migration and feeding rhythms of large zooplankton, two important mesoscale processes that are thought to influence the overall dynamics of the huge phytoplankton blooms in the region. Observations of the Anchor Station Experiment 1987 (ASE’87) are used to assess the quality of the model. There is overall agreement between observations and the corresponding simulated results. The timing, the magnitude, and the vertical structure of the phytoplankton bloom are well reproduced. The balances for carbon and nitrogen flows and stocks compare well to the numerous estimates found from the literature for the southern Benguela region. On the basis of the model results, the origin of the new nutrients, the fate of the carbon fixed by phytoplankton, and the importance of the microheterotrophic pathways are discussed. It is concluded that sediments of the St Helena Bay and surrounding areas may play a crucial role in increasing the level of phytoplankton production. The results also suggest that exudation is the main process by which the carbon fixed by phytoplankton would have been lost, and that microheterotrophic pathways would have been intense during the experiment.

  17. Food intake of European adolescents in the light of different food-based dietary guidelines: results of the HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) Study.

    Science.gov (United States)

    Diethelm, Katharina; Jankovic, Nicole; Moreno, Luis A; Huybrechts, Inge; De Henauw, Stefaan; De Vriendt, Tineke; González-Gross, Marcela; Leclercq, Catherine; Gottrand, Frédéric; Gilbert, Chantal C; Dallongeville, Jean; Cuenca-Garcia, Magdalena; Manios, Yannis; Kafatos, Anthony; Plada, María; Kersting, Mathilde

    2012-03-01

    Since inadequate food consumption patterns during adolescence are not only linked with the occurrence of obesity in youth but also with the subsequent risk of developing diseases in adulthood, the establishment and maintenance of a healthy diet early in life is of great public health importance. Therefore, the aim of the present study was to describe and evaluate the food consumption of a well-characterized sample of European adolescents against food-based dietary guidelines for the first time. The HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) Study is a cross-sectional study, whose main objective was to obtain comparable data on a variety of nutritional and health-related parameters in adolescents aged 12·5-17·5 years. Ten cities in Europe. The initial sample consisted of more than 3000 European adolescents. Among these, 1593 adolescents (54 % female) had sufficient and plausible dietary data on energy and food intakes from two 24 h recalls using the HELENA-DIAT software. Food intake of adolescents in Europe is not optimal compared with the two food-based dietary guidelines, Optimized Mixed Diet and Food Guide Pyramid, examined in this study. Adolescents eat half of the recommended amount of fruit and vegetables and less than two-thirds of the recommended amount of milk (and milk products), but consume much more meat (and meat products), fats and sweets than recommended. However, median total energy intake may be estimated to be nearly in line with the recommendations. The results urge the need to improve the dietary habits of adolescents in order to maintain health in later life.

  18. A new technology perspective and engineering tools approach for large, complex and distributed mission and safety critical systems components

    Science.gov (United States)

    Carrio, Miguel A., Jr.

    1988-01-01

    Rapidly emerging technology and methodologies have out-paced the systems development processes' ability to use them effectively, if at all. At the same time, the tools used to build systems are becoming obsolescent themselves as a consequence of the same technology lag that plagues systems development. The net result is that systems development activities have not been able to take advantage of available technology and have become equally dependent on aging and ineffective computer-aided engineering tools. New methods and tools approaches are essential if the demands of non-stop and Mission and Safety Critical (MASC) components are to be met.

  19. Mõisamuinasjutt / Helena Piip

    Index Scriptorium Estoniae

    Piip, Helena

    2004-01-01

    Jõuluaja veetmise võimalustest Palmse mõisas. Mõisarahvas kannab Mare Raidma kavandite järgi valmistatud 19. sajandi rõivaid. Keldri veini-, jahisaali jm. ruumide sisustuse on kavandanud Kalju Kivi, "Isabella" kohviku on kujundanud Leila Pärtelpoeg. Sepikojas (sepp Kaupo Kangur) saab õnne valada ja rauda taguda

  20. The integration of engineering and architecture: A perspective on natural ventilation for the new San Francisco Federal Building

    International Nuclear Information System (INIS)

    McConahey, Erin; Haves, Philip; Christ, Tim

    2002-01-01

    A description of the in-progress design of a new Federal Office Building for San Francisco is used to illustrate a number of issues arising in the design of large, naturally ventilated office buildings. These issues include the need for an integrated approach to design involving the architects, mechanical and structural engineers, lighting designers and specialist simulation modelers. In particular, the use of natural ventilation, and the avoidance of air-conditioning, depends on the high degree of exposed thermal mass made possible by the structural scheme and by the minimization of solar heat gains while maintaining the good daylighting that results from optimization of the facade. Another issue was the need for a radical change in interior space planning in order to enhance the natural ventilation; all the individual enclosed offices are located along the central spine of each floorplate rather than at the perimeter. The role of integration in deterring the undermining of the design through value engineering is discussed. The comfort criteria for the building were established based on the recent extension to the ASHRAE comfort standard based on the adaptive model for naturally ventilated buildings. The building energy simulation program EnergyPlus was used to compare the performance of different natural ventilation strategies. The results indicate that, in the San Francisco climate, wind-driven ventilation provides sufficient nocturnal cooling to maintain comfortable conditions and that external chimneys do not provide significant additional ventilation at times when it when it would be beneficial

  1. Towards high performance computing for molecular structure prediction using IBM Cell Broadband Engine--an implementation perspective.

    Science.gov (United States)

    Krishnan, S P T; Liang, Sim Sze; Veeravalli, Bharadwaj

    2010-01-18

    RNA structure prediction problem is a computationally complex task, especially with pseudo-knots. The problem is well-studied in existing literature and predominantly uses highly coupled Dynamic Programming (DP) solutions. The problem scale and complexity become embarrassingly humungous to handle as sequence size increases. This makes the case for parallelization. Parallelization can be achieved by way of networked platforms (clusters, grids, etc) as well as using modern day multi-core chips. In this paper, we exploit the parallelism capabilities of the IBM Cell Broadband Engine to parallelize an existing Dynamic Programming (DP) algorithm for RNA secondary structure prediction. We design three different implementation strategies that exploit the inherent data, code and/or hybrid parallelism, referred to as C-Par, D-Par and H-Par, and analyze their performances. Our approach attempts to introduce parallelism in critical sections of the algorithm. We ran our experiments on SONY Play Station 3 (PS3), which is based on the IBM Cell chip. Our results suggest that introducing parallelism in DP algorithm allows it to easily handle longer sequences which otherwise would consume a large amount of time in single core computers. The results further demonstrate the speed-up gain achieved in exploiting the inherent parallelism in the problem and also elicits the advantages of using multi-core platforms towards designing more sophisticated methodologies for handling a fairly long sequence of RNA. The speed-up performance reported here is promising, especially when sequence length is long. To the best of our literature survey, the work reported in this paper is probably the first-of-its-kind to utilize the IBM Cell Broadband Engine (a heterogeneous multi-core chip) to implement a DP. The results also encourage using multi-core platforms towards designing more sophisticated methodologies for handling a fairly long sequence of RNA to predict its secondary structure.

  2. Trends and Opportunities of BIM-GIS Integration in the Architecture, Engineering and Construction Industry: A Review from a Spatio-Temporal Statistical Perspective

    Directory of Open Access Journals (Sweden)

    Yongze Song

    2017-12-01

    Full Text Available The integration of building information modelling (BIM and geographic information system (GIS in construction management is a new and fast developing trend in recent years, from research to industrial practice. BIM has advantages on rich geometric and semantic information through the building life cycle, while GIS is a broad field covering geovisualization-based decision making and geospatial modelling. However, most current studies of BIM-GIS integration focus on the integration techniques but lack theories and methods for further data analysis and mathematic modelling. This paper reviews the applications and discusses future trends of BIM-GIS integration in the architecture, engineering and construction (AEC industry based on the studies of 96 high-quality research articles from a spatio-temporal statistical perspective. The analysis of these applications helps reveal the evolution progress of BIM-GIS integration. Results show that the utilization of BIM-GIS integration in the AEC industry requires systematic theories beyond integration technologies and deep applications of mathematical modeling methods, including spatio-temporal statistical modeling in GIS and 4D/nD BIM simulation and management. Opportunities of BIM-GIS integration are outlined as three hypotheses in the AEC industry for future research on the in-depth integration of BIM and GIS. BIM-GIS integration hypotheses enable more comprehensive applications through the life cycle of AEC projects.

  3. A Decade of Molecular Understanding of Withanolide Biosynthesis and In vitro Studies in Withania somnifera (L.) Dunal: Prospects and Perspectives for Pathway Engineering

    Science.gov (United States)

    Dhar, Niha; Razdan, Sumeer; Rana, Satiander; Bhat, Wajid W.; Vishwakarma, Ram; Lattoo, Surrinder K.

    2015-01-01

    Withania somnifera, a multipurpose medicinal plant is a rich reservoir of pharmaceutically active triterpenoids that are steroidal lactones known as withanolides. Though the plant has been well-characterized in terms of phytochemical profiles as well as pharmaceutical activities, limited attempts have been made to decipher the biosynthetic route and identification of key regulatory genes involved in withanolide biosynthesis. This scenario limits biotechnological interventions for enhanced production of bioactive compounds. Nevertheless, recent emergent trends vis-à-vis, the exploration of genomic, transcriptomic, proteomic, metabolomics, and in vitro studies have opened new vistas regarding pathway engineering of withanolide production. During recent years, various strategic pathway genes have been characterized with significant amount of regulatory studies which allude toward development of molecular circuitries for production of key intermediates or end products in heterologous hosts. Another pivotal aspect covering redirection of metabolic flux for channelizing the precursor pool toward enhanced withanolide production has also been attained by deciphering decisive branch point(s) as robust targets for pathway modulation. With these perspectives, the current review provides a detailed overview of various studies undertaken by the authors and collated literature related to molecular and in vitro approaches employed in W. somnifera for understanding various molecular network interactions in entirety. PMID:26640469

  4. A decade of molecular understanding of withanolide biosynthesis and in vitro studies in Withania somnifera (L. Dunal: Prospects and perspectives for pathway engineering

    Directory of Open Access Journals (Sweden)

    Niha eDhar

    2015-11-01

    Full Text Available Withania somnifera, a multipurpose medicinal plant is a rich reservoir of pharmaceutically active triterpenoids that are steroidal lactones known as withanolides. Though the plant has been well characterized in terms of phytochemical profiles as well as pharmaceutical activities, limited attempts have been made to decipher the biosynthetic route and identification of key regulatory genes involved in withanolide biosynthesis. This scenario limits biotechnological interventions for enhanced production of bioactive compounds. Nevertheless, recent emergent trends vis-à-vis, the exploration of genomic, transcriptomic, proteomic, metabolomic and in vitro studies have opened new vistas regarding pathway engineering of withanolide production. During recent years, various strategic pathway genes have been characterized with significant amount of regulatory studies which allude towards development of molecular circuitries for production of key intermediates or end products in heterologous hosts. Another pivotal aspect covering redirection of metabolic flux for channelizing the precursor pool towards enhanced withanolide production has also been attained by deciphering decisive branch point(s as robust targets for pathway modulation. With these perspectives, the current review provides a detailed overview of various studies undertaken by the authors and collated literature related to molecular and in vitro approaches employed in W. Somnifera for understanding various molecular network interactions in entirety.

  5. Understanding the Pathological Basis of Neurological Diseases Through Diagnostic Platforms Based on Innovations in Biomedical Engineering: New Concepts and Theranostics Perspectives

    Directory of Open Access Journals (Sweden)

    Laura Ganau

    2018-02-01

    Full Text Available The pace of advancement of genomics and proteomics together with the recent understanding of the molecular basis behind rare diseases could lead in the near future to significant advances in the diagnosing and treating of many pathological conditions. Innovative diagnostic platforms based on biomedical engineering (microdialysis and proteomics, biochip analysis, non-invasive impedance spectroscopy, etc. are introduced at a rapid speed in clinical practice: this article primarily aims to highlight how such platforms will advance our understanding of the pathological basis of neurological diseases. An overview of the clinical challenges and regulatory hurdles facing the introduction of such platforms in clinical practice, as well as their potential impact on patient management, will complement the discussion on foreseeable theranostic perspectives. Indeed, the techniques outlined in this article are revolutionizing how we (1 identify biomarkers that better define the diagnostic criteria of any given disease, (2 develop research models, and (3 exploit the externalities coming from innovative pharmacological protocols (i.e., those based on monoclonal antibodies, nanodrugs, etc. meant to tackle the molecular cascade so far identified.

  6. Perspectives at the East European engineering companies in the field of power industry in the power-plant construction globalization conditions

    International Nuclear Information System (INIS)

    Ganchev, R.

    2001-01-01

    A large group of companies, institutes, boiler and power engineering work ect. from East European countries, currently in process of reorganization or already transformed into new-established private companies and corporations possess significant intellectual property in the field of thermal power technologies and equipment and broad experience in the design and the erection of thermal power plants. In many cases this know-how is not only competitive to that of the large companies of the West and of the Far East, but frequently it also proves to have a number of advantages. However, in the years of transition in these countries and simultaneous globalization, the owners of this potentials meet with difficulties and restrictions to realize it fully. Large investment projects - for new or replacement capacities or comprehensive rehabilitation or refurbishment of TPPs - are accessible only for the financially powerful EPC-contractors and key equipment suppliers, for which large bank credits are accessible. The near future perspective, for the scientists and experts that have accumulated this capital, is in the opportunity to employ the extensive experience and know-how of this firms in the forthcoming large-scale rehabilitation projects in these countries, and primarily, in the solution of specific problems, that have not been solved so far, provided that the projects are awarded not on the basis of the financial power of the contractors but on the basis of the efficiency of the proposed original solutions

  7. Clinical trial perspective for adult and juvenile Huntington′s disease using genetically-engineered mesenchymal stem cells

    Directory of Open Access Journals (Sweden)

    Peter Deng

    2016-01-01

    Full Text Available Progress to date from our group and others indicate that using genetically-engineered mesenchymal stem cells (MSC to secrete brain-derived neurotrophic factor (BDNF supports our plan to submit an Investigational New Drug application to the Food and Drug Administration for the future planned Phase 1 safety and tolerability trial of MSC/BDNF in patients with Huntington′s disease (HD. There are also potential applications of this approach beyond HD. Our biological delivery system for BDNF sets the precedent for adult stem cell therapy in the brain and could potentially be modified for other neurodegenerative disorders such as amyotrophic lateral sclerosis (ALS, spinocerebellar ataxia (SCA, Alzheimer′s disease, and some forms of Parkinson′s disease. The MSC/BDNF product could also be considered for studies of regeneration in traumatic brain injury, spinal cord and peripheral nerve injury. This work also provides a platform for our future gene editing studies, since we will again use MSCs to deliver the needed molecules into the central nervous system.

  8. Breast Cancer Stem Cell Therapeutics, Multiple Strategies Versus Using Engineered Mesenchymal Stem Cells With Notch Inhibitory Properties: Possibilities and Perspectives.

    Science.gov (United States)

    Bose, Bipasha; Sen, Utsav; Shenoy P, Sudheer

    2018-01-01

    Relapse cases of cancers are more vigorous and difficult to control due to the preponderance of cancer stem cells (CSCs). Such CSCs that had been otherwise dormant during the first incidence of cancer gradually appear as radiochemoresistant cancer cells. Hence, cancer therapeutics aimed at CSCs would be an effective strategy for mitigating the cancers during relapse. Alternatively, CSC therapy can also be proposed as an adjuvant therapy, along-with the conventional therapies. As regenerative stem cells (RSCs) are known for their trophic effects, anti-tumorogenicity, and better migration toward an injury site, this review aims to address the use of adult stem cells such as dental pulp derived; cord blood derived pure populations of regenerative stem cells for targeting CSCs. Indeed, pro-tumorogenicity of RSCs is of concern and hence has also been dealt with in relation to breast CSC therapeutics. Furthermore, as notch signaling pathways are upregulated in breast cancers, and anti-notch antibody based and sh-RNA based therapies are already in the market, this review focuses the possibilities of engineering RSCs to express notch inhibitory proteins for breast CSC therapeutics. Also, we have drawn a comparison among various possibilities of breast CSC therapeutics, about, notch1 inhibition. J. Cell. Biochem. 119: 141-149, 2018. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  9. Battery systems engineering

    CERN Document Server

    Rahn, Christopher D

    2012-01-01

    A complete all-in-one reference on the important interdisciplinary topic of Battery Systems Engineering Focusing on the interdisciplinary area of battery systems engineering, this book provides the background, models, solution techniques, and systems theory that are necessary for the development of advanced battery management systems. It covers the topic from the perspective of basic electrochemistry as well as systems engineering topics and provides a basis for battery modeling for system engineering of electric and hybrid electric vehicle platforms. This original

  10. Using Collaborative Engineering to Inform Collaboration Engineering

    Science.gov (United States)

    Cooper, Lynne P.

    2012-01-01

    Collaboration is a critical competency for modern organizations as they struggle to compete in an increasingly complex, global environment. A large body of research on collaboration in the workplace focuses both on teams, investigating how groups use teamwork to perform their task work, and on the use of information systems to support team processes ("collaboration engineering"). This research essay presents collaboration from an engineering perspective ("collaborative engineering"). It uses examples from professional and student engineering teams to illustrate key differences in collaborative versus collaboration engineering and investigates how challenges in the former can inform opportunities for the latter.

  11. The Application of Ground-Penetrating Radar to Transportation Engineering: Recent Advances and New Perspectives (GI Division Outstanding ECS Award Lecture)

    Science.gov (United States)

    Tosti, Fabio; Benedetto, Andrea; Pajewski, Lara; Alani, Amir M.

    2017-04-01

    aims at presenting the recent advances and the new perspectives in the application of GPR to transportation engineering. This study reports on new experimental-based and theoretical models for the assessment of the physical (i.e., clay and water content in subgrade soils, railway ballast fouling) and the mechanical (i.e., the Young's modulus of elasticity) properties that are critical in maintaining the structural stability and the bearing capacity of the major transport infrastructures, such as highways, railways and airfields. With regard to the physical parameters, the electromagnetic behaviour related to the clay content in the load-bearing layers of flexible pavements as well as in subgrade soils has been analysed and modelled in both dry and wet conditions. Furthermore, it is discussed a new simulation-based methodology for the detection of the fouling content in railway ballast. Concerning the mechanical parameters, experimental based methods are presented for the assessment of the strength and deformation properties of the soils and the top-bounded layers of flexible pavements. Furthermore, unique case studies in terms of the methodology proposed, the survey planning and the site procedures in rather complex operations, are discussed in the case of bridges and tunnels inspections. Acknowledgements The Authors are grateful to the GI Division President Dr. Francesco Soldovieri and the relevant Award Committee in the context of the "GI Division Outstanding Early Career Scientists Award" of the European Geosciences Union. We also acknowledge the COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar" for providing networking and discussion opportunities throughout its activity and operation as well as facilitating prospect for publishing research outputs.

  12. El buscador de Internet como objeto cultural: la perspectiva de los alumnos The Internet search engine as a cultural object: students' perspective

    Directory of Open Access Journals (Sweden)

    Flora Beatriz Perelman

    2010-12-01

    Full Text Available Los motores de búsqueda son objetos culturales que presentan, como toda herramienta destinada a la organización y circulación de la información, desafíos de carácter semiótico y epistémico así como sesgos ideológicos. El presente artículo analiza el modo en que alumnos de escuela primaria conceptualizan el modo de funcionamiento de un buscador que usan asiduamente. La perspectiva teórica adoptada considera los aportes de la tradición sociohistórica vigotskiana y del constructivismo relacional piagetiano. El diseño metodológico se inscribe en un estudio cualitativo de casos en el que se emplean dos instrumentos de recolección: observaciones de clase (en el aula y en la sala de informática, y entrevistas clínico-críticas posteriores. Los resultados evidencian que en situaciones didácticas donde el buscador se convierte en objeto de análisis, los alumnos toman conciencia de que la construcción de las palabras clave los ubica en una situación de escritura para un "lector robot" que no coopera en la interpretación. Ante este problema, se proponen usar una sintaxis en la que las palabras se enlazan con signos diversos a los que adjudican funciones vinculadas con sus conocimientos del lenguaje natural. La contradicción se produce porque los motores de búsqueda utilizan una lógica más próxima a las matemáticas.Search engines are cultural objects which represent semiotic and epistemological challenges as well as ideological bias, like every tool destined to the organization and circulation of information. This article analyzes the conceptualizations of elementary school students about a search engine that frequently used. The adopted theoretical perspective considers both the contribution of the Vigotskian sociohistorical tradition and the Piagetian relational constructivism. The methodological design consisted of a qualitative study of cases. Two data collection instruments are used: observations in the classroom and in

  13. Ethos de Helena no teatro trágico de Euripides (séc. V a.C) : uma análise de Troianas (415 a.C), Helena (412 a.C) e Orestes (408 a.C)

    OpenAIRE

    Larissa de Oliveira Soares

    2016-01-01

    Ao comparar a visibilidade da figura feminina na tragédia do período clássico (508 – 338 a.C) com o espaço destinado às mulheres concretas da Atenas do mesmo período, deparamo-nos com um intrigante contraste, já que a participação destas na vida pública era restrita aos cerimoniais religiosos. Amplamente representada na tradição literária antiga - nos versos de um amplo leque de poetas - a figura de Helena possibilita múltiplas interpretações a respeito de seu caráter e culpabilidade nos even...

  14. Breakfast habits among European adolescents and their association with sociodemographic factors: the HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) study.

    Science.gov (United States)

    Hallström, Lena; Vereecken, Carine A; Labayen, Idoia; Ruiz, Jonatan R; Le Donne, Cinzia; García, Magdalena Cuenca; Gilbert, Chantal C; Martínez, Sonia Gómez; Grammatikaki, Eva; Huybrechts, Inge; Kafatos, Anthony; Kersting, Mathilde; Manios, Yannis; Molnár, Dénes; Patterson, Emma; Widhalm, Kurt; De Vriendt, Tineke; Moreno, Luis A; Sjöström, Michael

    2012-10-01

    To describe breakfast habits at food group level in European adolescents and to investigate the associations between these habits and sociodemographic factors. Cross-sectional study. Secondary schools from nine European cities participating in the HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) Study. Breakfast habits were assessed twice using a computer-based 24 h dietary recall. Adolescents who consumed breakfast on at least one recall day were classified as 'breakfast consumers' and adolescents who did not have anything for breakfast on either of the two recall days were considered 'breakfast skippers'. A 'breakfast quality index' to describe breakfast quality was created based on the consumption or non-consumption of cereals/cereal products, dairy products and fruits/vegetables. The sociodemographic factors studied were sex, age, region of Europe, maternal and paternal education, family structure and family affluence. Adolescents (n 2672, 53 % girls) aged 12-17 years. The majority of the adolescents reported a breakfast that scored poorly on the breakfast quality index. Older adolescents, adolescents from the southern part of Europe and adolescents from families with low socio-economic status were more likely to consume a low-quality breakfast. The study highlights the need to promote the consumption of a high-quality breakfast among adolescents, particularly in older adolescents, adolescents from southern Europe and adolescents from families with low socio-economic status, in order to improve public health.

  15. Regular breakfast consumption is associated with higher blood vitamin status in adolescents: the HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) Study.

    Science.gov (United States)

    Mielgo-Ayuso, Juan; Valtueña, Jara; Cuenca-García, Magdalena; Gottrand, Fréderic; Breidenassel, Christina; Ferrari, Marika; Manios, Yannis; De Henauw, Stefaan; Widhalm, Kurt; Kafatos, Anthony; Kersting, Mathilde; Huybrechts, Inge; Moreno, Luis A; González-Gross, Marcela

    2017-06-01

    The present study aimed to examine the association between different breakfast consumption patterns and vitamin intakes and blood vitamin concentrations in European adolescents. Breakfast consumption was assessed by a questionnaire. Vitamin intake was calculated from two 24 h recalls. Blood vitamin and total homocysteine (tHcy) concentrations were analysed from fasting blood samples. The European Commission-funded HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) Study. Participants were 1058 (52·8 % females) European adolescents (aged 12·5-17·5 years) from ten cities. Lower vitamin D and vitamin C concentrations were observed in male and female breakfast skippers than in consumers (Pbreakfast consumers presented higher holo-transcobalamin and lower tHcy (Pbreakfast compared with skippers (Pbreakfast consumption is associated with higher blood vitamin D and cobalamin concentrations in males and with higher vitamin D and holo-transcobalamin and lower tHcy concentrations in females. Moreover, breakfast consumption is associated with high intakes of vitamin D and total folate in both sexes, and with high intakes of vitamin B6 and vitamin E in females.

  16. Elements concentration analysis in groundwater from the North Serra Geral aquifer in Santa Helena-Brazil using SR-TXRF spectrometer.

    Science.gov (United States)

    Justen, Gisele C; Espinoza-Quiñones, Fernando R; Módenes, Aparecido Nivaldo; Bergamasco, Rosangela

    2012-01-01

    In this work the analysis of elements concentration in groundwater was performed using the synchrotron radiation total-reflection X-ray fluorescence (SR-TXRF) technique. A set of nine tube-wells with serious risk of contamination was chosen to monitor the mean concentration of elements in groundwater from the North Serra Geral aquifer in Santa Helena, Brazil, during 1 year. Element concentrations were determined applying a SR-TXRF methodology. The accuracy of SR-TXRF technique was validated by analysis of a certified reference material. As the groundwater composition in the North Serra Geral aquifer showed heterogeneity in the spatial distribution of eight major elements, a hierarchical clustering to the data was performed. By a similarity in their compositions, two of the nine wells were grouped in a first cluster, while the other seven were grouped in a second cluster. Calcium was the major element in all wells, with higher Ca concentration in the second cluster than in the first cluster. However, concentrations of Ti, V, Cr in the first cluster are slightly higher than those in the second cluster. The findings of this study within a monitoring program of tube-wells could provide a useful assessment of controls over groundwater composition and support management at regional level.

  17. PBL in Engineering Education

    DEFF Research Database (Denmark)

    PBL in Engineering Education: International Perspectives on Curriculum Change presents diverse views on the implementation of PBL from across the globe. The purpose is to exemplify curriculum changes in engineering education. Drivers for change, implementation descriptions, challenges and future...... perspectives are addressed. Cases of PBL models are presented from Singapore, Malaysia, Tunisia, Portugal, Spain and the USA. These cases are stories of thriving success that can be an inspiration for those who aim to implement PBL and change their engineering education practices. In the examples presented...

  18. Engineering photosynthesis: progress and perspectives

    OpenAIRE

    Orr, Douglas J.; Pereira, Auderlan M.; da Fonseca Pereira, Paula; Pereira-Lima, Ítalo A.; Zsögön, Agustin; Araújo, Wagner L.

    2017-01-01

    Photosynthesis is the basis of primary productivity on the planet. Crop breeding has sustained steady improvements in yield to keep pace with population growth increases. Yet these advances have not resulted from improving the photosynthetic process per se but rather of altering the way carbon is partitioned within the plant. Mounting evidence suggests that the rate at which crop yields can be boosted by traditional plant breeding approaches is wavering, and they may reach a “yield ceiling” i...

  19. Bio-engineering - A Perspective

    African Journals Online (AJOL)

    at knee and ankle are available, which have been checked by different experimental methods. These findings ... An instrument was constructed to measure the strain. (extension per unit original length) produced for a ... representing strain for given stress, with long axes gene- rally running craniocaudally, and the proportion ...

  20. Engineering Background: Modern Formats and Challenges of Conceptual Engineering

    Science.gov (United States)

    Khamidullina, A. F.; Kuzmina, M. A.; Khusnutdinova, E. M.; Konakhina, I. A.

    2017-09-01

    This paper describes the analysis of problems and development perspectives of engineering education in our and other countries. Special attention is given to modern formats of education that motivate creative efforts of engineers-to-be as well as issues of conceptual engineering taking the challenges of modernity into account.

  1. Caracterização físico-química de amostras de mel de abelha africanizada dos municípios de Santa Helena e Terra Roxa (PR

    Directory of Open Access Journals (Sweden)

    F.J. Moraes

    2014-08-01

    Full Text Available O presente estudo teve como objetivo a caracterização físico-química de amostras de mel de Apis mellifera coletadas nos municípios de Santa Helena e Terra Roxa, localizados na região oeste do Estado do Paraná, Brasil. Foram coletadas 40 amostras de mel, sendo 20 do município de Santa Helena e 20 de Terra Roxa (PR, coletadas diretamente com os apicultores, as quais foram submetidas a análises físico-químicas de umidade, acidez, pH, cinzas, condutividade elétrica e cor, a fim de verificar se as mesmas apresentavam-se em conformidade com a legislação nacional vigente (Instrução Normativa nº 11, além de conhecer o perfil físico-químico do mel das diferentes localidades, na safra 2008/2009. Os dados encontrados foram submetidos à análise de variância e teste F a 5% de significância. Os resultados apresentaram diferença significativa (P<0,05 apenas entre os valores de acidez, tendo o mel oriundo de Terra Roxa apresentado valor mais alto (33,45±7,7meq.kg-1 que o de Santa Helena (24,53±6,3meq.kg-1. Em sua maioria, as amostras analisadas encontraram-se dentro das especificações determinadas pela legislação para as características físico-químicas, com exceção do parâmetro de umidade, que, apesar de não ter apresentado diferença significativa entre os valores encontrados para os dois municípios, estavam acima do limite estabelecido pela legislação (20% em 8 amostras do município de Santa Helena e em 7 de Terra Roxa, totalizando 37,5% das amostras. Essa característica pode ter deixado o produto mais susceptível à fermentação e pode ter sido ocasionada pela colheita imatura do mel.

  2. Feasibility Study of Biopower in East Helena, Montana. A Study Prepared in Partnership with the Environmental Protection Agency for the RE-Powering America's Land Initiative: Siting Renewable Energy on Potentially Contaminated Land and Mine Sites

    Energy Technology Data Exchange (ETDEWEB)

    Moriarty, K.

    2013-02-01

    The U.S. Environmental Protection Agency (EPA) developed the RE-Powering America's Land initiative to reuse contaminated sites for renewable energy generation when aligned with the community's vision for the site. The former American Smelting and Refining Company (Asarco) smelter in East Helena, Montana, was selected for a feasibility study under the initiative. Biomass was chosen as the renewable energy resource based on the wood products industry in the area. Biopower was selected as the technology based on Montana's renewable portfolio standard (RPS) requiring utilities to purchase renewable power.

  3. Marysville, Montana, Geothermal Project: Geological and Geophysical Exploration at Marysville Geothermal Area: 1973 Results (With a Section on ''Contemporary Seismicity in the Helena, Montana Region'')

    Energy Technology Data Exchange (ETDEWEB)

    Blackwell, D.D.; Brott, C.A.; Goforth, T.T.; Holdaway, M.J.; Morgan, P.; Friedline, R.; Smith, R.L.

    1974-04-01

    This report describes field geological and geophysical investigations of the Marysville geothermal area, including geological mapping, sample collection, a ground total field magnetic survey, gravity survey, seismic ground noise survey, microearthquake survey, and heat flow study. Although sufficient data are not available, it is likely that a magma chamber is the heat source. A second section, ''Contemporary Seismicity in the Helena, Montana, Region'' examines the coincidence of high heat flow and earthquake swarm activity in this region. (GRA)

  4. Daily sugar-sweetened beverage consumption and insulin resistance in European adolescents: the HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) Study.

    Science.gov (United States)

    Kondaki, Katerina; Grammatikaki, Evangelia; Jiménez-Pavón, David; De Henauw, Stefaan; González-Gross, Marcela; Sjöstrom, Michael; Gottrand, Frédéric; Molnar, Dénes; Moreno, Luis A; Kafatos, Anthony; Gilbert, Chantal; Kersting, Mathilde; Manios, Yannis

    2013-03-01

    The present study aimed to evaluate the relationship between the consumption of selected food groups and insulin resistance, with an emphasis on sugar-sweetened beverages (SSB). The present research is a large multicentre European study in adolescents, the HELENA-CSS (Healthy Lifestyle in Europe by Nutrition in Adolescence Cross-Sectional Study). Homeostasis model assessment-insulin resistance index (HOMA-IR) was calculated. Several anthropometric and lifestyle characteristics were recorded. Dietary assessment was conducted by using a short FFQ. The participants were a subset of the original sample (n 546) with complete data on glucose, insulin and FFQ. All participants were recruited at schools. Median (25th, 75th percentile) HOMA-IR was 0.62 (0.44, 0.87). Mean HOMA-IR was significantly higher among adolescents consuming brown bread ≤1 time/week than among those consuming 2-6 times/week (P = 0·011). Mean values of HOMA-IR were also higher in adolescents consuming SSB >5 times/week compared with those consuming less frequently, although a statistically significant difference was detected between those consuming SSB 5-6 times/week and 2-4 times/week (P = 0.049). Multiple linear regression analysis showed that only the frequency of SSB consumption was significantly associated with HOMA-IR after controlling for potential confounders. In particular, it was found that HOMA-IR levels were higher among adolescents consuming SSB 5-6 times/week and ≥1 time/d compared with those consuming ≤1 time/week by 0.281 and 0.191 units, respectively (P = 0.009 and 0.046, respectively). The present study revealed that daily consumption of SSB was related with increased HOMA-IR in adolescents.

  5. A indignação dialética: paixão e resistência em Maria Helena Souza Patto

    Directory of Open Access Journals (Sweden)

    Conrado Ramos

    2011-09-01

    Full Text Available Este trabalho dialoga com a obra de Maria Helena Souza Patto, não com o propósito de datar e reificar uma autora e seu pensamento, mas sim de reavivar seu conteúdo crítico sobre a psicologia numa época em que a mediocrização dos cursos esbarra no mais raso sentido do termo formação. Nesse contexto, o objetivo deste trabalho é sustentar a obra da autora como contracorrente do que se impõe, como resistência ainda possível. Não obstante, analisa-se como o pensamento da autora contribuiu para nos legar uma psicologia absolutamente diferente da que ela própria encontrou. Abordam-se temas estudados em profundidade pela autora, tais como a história da psicologia, o fracasso escolar, a psicologia escolar, a psicologia aplicada à infância, a crítica à psicologia e as relações entre psicologia e política, temas sempre reunidos pela denúncia à ideologia hegemônica e pela indignação diante dos novos movimentos ideológicos que visam manter intactas as condições da dominação. Entende-se que o resultado final permite constelar um pensamento crítico e dialético segundo os métodos de reflexão da própria autora.

  6. Dietary sources and sociodemographic and lifestyle factors affecting vitamin D and calcium intakes in European adolescents: the Healthy Lifestyle in Europe by Nutrition in Adolescence (HELENA) Study.

    Science.gov (United States)

    Julián, Cristina; Mouratidou, Theodora; Vicente-Rodriguez, Germán; Gracia-Marco, Luis; Valtueña, Jara; González-Gross, Marcela; Ferrari, Marika; Gottrand, Frederic; Manios, Yannis; de la O, Alejandro; Widhalm, Kurt; Molnár, Dénes; Kafatos, Antonios; Sjöström, Michael; Kersting, Mathilde; Gunter, Marc J; De Henauw, Stefaan; Moreno, Luis A; Huybrechts, Inge

    2017-06-01

    To investigate dietary sources of Ca and vitamin D (VitD) intakes, and the associated sociodemographic and lifestyle factors, among European adolescents. Linear regression mixed models were used to examine sex-specific associations of Ca and VitD intakes with parental education, family affluence (FAS), physical activity and television (TV) watching while controlling for age, Tanner stage, energy intake and diet quality. The Healthy Lifestyle in Europe by Nutrition in Adolescence (HELENA)Cross-Sectional Study. Adolescents aged 12·5-17·5 years (n 1804). Milk and cheese were the main sources of Ca (23 and 19 % contribution to overall Ca intake, respectively). Fish products were the main VitD source (30 % contribution to overall VitD intake). Ca intake was positively associated with maternal education (β=56·41; 95 % CI 1·98, 110·82) and negatively associated with TV viewing in boys (β=-0·43; 95 % CI -0·79, -0·07); however, the significance of these associations disappeared when adjusting for diet quality. In girls, Ca intake was positively associated with mother's (β=73·08; 95 % CI 34·41, 111·74) and father's education (β=43·29; 95 % CI 5·44, 81·14) and FAS (β=37·45; 95 % CI 2·25, 72·65). This association between Ca intake and mother's education remained significant after further adjustment for diet quality (β=41·66; 95 % CI 0·94, 82·38). Girls with high-educated mothers had higher Ca intake. Low-educated families with poor diet quality may be targeted when strategizing health promotion programmes to enhance dietary Ca.

  7. Purposeful engineering economics

    CERN Document Server

    Chadderton, Ronald A

    2015-01-01

    This textbook/course supplement stands as a unique and highly original complement to the traditional engineering economics curriculum. Its primarily narrative approach conveys the essence of an “Austrian" economic perspective on cash flow analysis and decision making in engineering, without extensive tables and graphs, and requires very little mathematics. The book’s objective is to add a new perspective to the usual study of cash flow analysis and solely econometric engineering decision making. The author draws on the methodology of the Austrian Economists—a school of economic thought that bases its study of economic phenomena on the interpretation and analysis of the purposeful actions of individuals. The book includes an array of illustrative case studies examined in detail by the author and emphasizes the importance of market processes and price signals to coordinate engineering plans. Purposeful Engineering Economics is an ideal resource for students, teaching faculty, and practicing professional ...

  8. Situational Analysis of Engineering Practice

    DEFF Research Database (Denmark)

    Buch, Anders

    STS inspired studies of engineering work practices provide new material for a richer understanding of engineering culture. However, the specific and strictly situated focus of many of these studies threatens to limit discussions of engineering practices to departmental and discrete institutional...... settings. This micro perspective potentially overlooks the inherent and overarching normativities that inform engineering culture. Furthermore, the micro perspective has difficulties in transgressing institutional boundaries in order to investigate the dynamics of cultural reproduction in engineering....... The paper will propose a research agenda that – inspired by George Marcus’ multi-sited ethnographic methodology (Marcus 1998) and Adele Clarke’s situational analysis (Clarke 2005) – analyze (and contrasts) engineering practices in diverse settings (e.g. engineering education and engineering work) in order...

  9. THE CONCEPT OF INTEGRATED ENGINEERING AND BUSINESS (EB EDUCATION SYSTEM

    Directory of Open Access Journals (Sweden)

    Michał Charlak

    2013-12-01

    Full Text Available In our approach to engineering and business education system an engineer is a man working as creator and user of technical products. We stress that the process of understanding and gaining knowledge of technical reality and creativity of engineers are the essential for EB concept . Next, we describe briefly three perspectives for building the system of innovative product origination as a basis for EB system: 1 designer’s perspective; 2 business perspective. 3 consumer perspective.

  10. Control and diagnosis oriented modelling of the compression ignition engine; Modelisation du moteur a allumage par compression dans la perspective du controle et du diagnostic

    Energy Technology Data Exchange (ETDEWEB)

    Grondin, O.

    2004-12-15

    This thesis has described an investigation into the modelling of compression ignition engine for control and diagnosis purpose. The Diesel engine is the most efficient and clean internal combustion engine due to modem electromechanical actuators. However, pollutant emission regulations are much more stricter, thus, these complex systems need sophisticated and efficient control algorithms to reach very low emission levels. For this task, engine models are required at each step of the control system development: control laws synthesis, simulation and validation. The system under study is a six cylinder direct injection Diesel engine fitted with a turbocharger. The model of this system is based on physical laws for some parts of the engine such as cylinders, manifolds, turbocharger and crank-slider system. In order to reduce computing time we choose to model heat transfer and heat release during combustion using simple empirical correlations. Resulting model has been implemented in the Matlab-Simulink environment and it can predict variables of interest for control purpose with one degree crank angle resolution. The model has been tested numerically and compared with an industrial engine simulation code with good results. Moreover, model output variables are in good agreement with experimental data recorded on a heavy-duty research engine. The engine model has been embedded on a board providing enough computing performances to perform real-time simulations, this will be helpful for 'hardware-in-the-loop' simulations. Another part of this study is dedicated to the combustion process modelling using a non linear phenomenological model: the NARMAX model. The goal is to predict the in-cylinder pressure evolution using other measurements available on the engine. The NARMAX model parameters have been identified using input-output data carried out from the experimental engine. Such model is well suited for real-time applications compare to numerically cost

  11. Geologic setting, sedimentary architecture, and paragenesis of the Mesoproterozoic sediment-hosted Sheep Creek Cu-Co-Ag deposit, Helena embayment, Montana

    Science.gov (United States)

    Graham, Garth; Hitzman, Murray W.; Zieg, Jerry

    2012-01-01

    The northern margin of the Helena Embayment contains extensive syngenetic to diagenetic massive pyrite horizons that extend over 25 km along the Volcano Valley-Buttress fault zone and extend up to 8 km basinward (south) within the Mesoproterozoic Newland Formation. The Sheep Creek Cu-Co deposit occurs within a structural block along a bend in the fault system, where replacement-style chalcopyrite mineralization is spatially associated mostly with the two stratigraphically lowest massive pyrite zones. These mineralized pyritic horizons are intercalated with debris flows derived from synsedimentary movement along the Volcano Valley-Buttress fault zone. Cominco American Inc. delineated a geologic resource of 4.5 Mt at 2.5% Cu and 0.1% Co in the upper sulfide zone and 4 Mt at 4% Cu within the lower sulfide zone. More recently, Tintina Resources Inc. has delineated an inferred resource of 8.48 Mt at 2.96% Cu, 0.12% Co, and 16.4 g/t Ag in the upper sulfide zone. The more intact upper sulfide zone displays significant thickness variations along strike thought to represent formation in at least three separate subbasins. The largest accumulation of mineralized sulfide in the upper zone occurs as an N-S–trending body that thickens southward from the generally E trending Volcano Valley Fault and probably occupies a paleograben controlled by normal faults in the hanging wall of the Volcano Valley Fault. Early microcrystalline to framboidal pyrite was accompanied by abundant and local barite deposition in the upper and lower sulfide zones, respectively. The sulfide bodies underwent intense (lower sulfide zone) to localized (upper sulfide zone) recrystallization and overprinting by coarser-grained pyrite and minor marcasite that is intergrown with and replaces dolomite. Silicification and paragenetically late chalcopyrite, along with minor tennantite in the upper sulfide zone, replaces fine-grained pyrite, barite, and carbonate. The restriction of chalcopyrite to inferred

  12. Practical electrical engineering

    CERN Document Server

    N Makarov, Sergey; Bitar, Stephen J

    2016-01-01

    This textbook provides comprehensive, in-depth coverage of the fundamental concepts of electrical and computer engineering. It is written from an engineering perspective, with special emphasis on circuit functionality and applications. Reliance on higher-level mathematics and physics, or theoretical proofs has been intentionally limited in order to prioritize the practical aspects of electrical engineering. This text is therefore suitable for a number of introductory circuit courses for other majors such as robotics, mechanical, biomedical, aerospace, civil, architecture, petroleum, and industrial engineering. The authors’ primary goal is to teach the aspiring engineering student all fundamental tools needed to understand, analyze and design a wide range of practical circuits and systems. Their secondary goal is to provide a comprehensive reference, for both major and non-major students as well as practicing engineers. Provides a self-contained, fundamental textbook on electric circuits and basic electronic...

  13. Engineering Encounters: Engineering Adaptations

    Science.gov (United States)

    Gatling, Anne; Vaughn, Meredith Houle

    2015-01-01

    Engineering is not a subject that has historically been taught in elementary schools, but with the emphasis on engineering in the "Next Generation Science Standards," curricula are being developed to explicitly teach engineering content and design. However, many of the scientific investigations already conducted with students have…

  14. Exhibit Engineering

    DEFF Research Database (Denmark)

    Mortensen, Marianne Foss

    of tools and processes to guide the design of educational science exhibits. The guiding paradigm for this development is design-based research, which is characterised by an iterative cycle of design, enactment, and analysis. In the design phase, an educational intervention is planned and carried out based......) a synthesis of the findings from the first two studies with findings from the literature to generate two types of results: a coherent series of suggestions for a design iteration of the studied exhibit as well as a more general normative model for exhibit engineering. Finally, another perspective......Science museums define the objectives of their exhibitions in terms of visitor learning outcomes. Yet, exhibit designers lack theoretical and empirical research findings on which to base the creation of such educational environments. Here, this shortcoming is addressed through the development...

  15. Perspectives of Best Practices for Learning Gender-Inclusive Science: Influences of Extracurricular Science for Gifted Girls and Electrical Engineering for Women.

    Science.gov (United States)

    Wood, Shaunda L.

    2002-01-01

    Explores the perceptions of gifted girls with regard to how the family, home, and school environments influenced their choices to take extracurricular science classes. Uses qualitative and quantitative methods to measure girls' attitudes toward science. Specifically addresses gender differences of gifted girls and women in engineering. (Contains…

  16. Experiences of a Multidisciplinary Course on Geo-Signal Processing from a DSP Perspective Offered in Electrical Engineering at King Fahd University of Petroleum and Minerals

    Science.gov (United States)

    Mousa, W. A.

    2012-01-01

    The purpose of this paper is to share the experience gained in, and the efforts made toward, introducing and implementing a new course in the challenging and important area of geophysical signal processing at the Electrical Engineering (EE) Department, King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, Saudi Arabia. The new course,…

  17. Insights on Supporting Learning during Computing Science and Engineering Students' Transition to University: A Design-Oriented, Mixed Methods Exploration of Instructor and Student Perspectives

    Science.gov (United States)

    Guloy, Sheryl; Salimi, Farimah; Cukierman, Diana; McGee Thompson, Donna

    2017-01-01

    Using a design-based orientation, this mixed-method study explored ways to support computing science and engineering students whose study strategies may be inadequate to meet coursework expectations. Learning support workshops, paired with university courses, have been found to assist students as they transition to university learning, thereby…

  18. Engineering Design Thinking

    Science.gov (United States)

    Lammi, Matthew; Becker, Kurt

    2013-01-01

    Engineering design thinking is "a complex cognitive process" including divergence-convergence, a systems perspective, ambiguity, and collaboration (Dym, Agogino, Eris, Frey, & Leifer, 2005, p. 104). Design is often complex, involving multiple levels of interacting components within a system that may be nested within or connected to other systems.…

  19. Evaluation of User Interface of DL + Federated Search Engine from the Perspective of M.A / M.S.C Students in Al-Zahra University in order to Provide Federated Search Engines User Interface Pattern

    Directory of Open Access Journals (Sweden)

    Amir Ghaebi

    2014-02-01

    The results showed that the major component from graduate students' perspective is guidance and navigation and searched filter components. Results indicate that more than 50 percent of students the importance of 74 criteria of 96 criteria considered high and very high and, (therefore the majority of the criteria in the study from the viewpoints are acceptable. However, findings also showed that among the four components of this study, the search filter, display and record review, consolidation and guidance is a positive relation, and between the views of different faculties is not significant difference about the importance of criterias and components.

  20. Understanding Engineering Ethics

    Directory of Open Access Journals (Sweden)

    Abdi O. Shuriye

    2012-01-01

    Full Text Available Engineering ethics aims to enhance engineer’s ability to confront moral issues raised by engineering activities. It covers engineering as social experimentation, the engineer’s responsibility for safety, and the rights of engineers. What constitutes engineering ethics is the underlining question of this research. Hence, the objective of the research is to systematically provide answers to the aforementioned question. The research also studies the scope and the origin of the subject matter. At the same time, the research highlights the significance of the subject from diverse perspectives; including Western and Islamic perspectives. ABSTRAK: Etika kejuruteraan bertujuan meningkatkan keupayaan juruera menghadapi isu-isu moralyang timbul dari aktiviti-aktiviti kejuruteraan. Ia merangkumi kejuruteraan sebagai eksperimentasi sosial, tanggungjawab jurutera terhadap keselamatan dan hak-hak jurutera. Persoalan utama penyelidikan ini adalah apa yang merangkumi etika kejuruteraan. Penyelidikan ini juga mengkaji skop dan asal usul etika kejuruteraan. Kajian ini turut membincangkan subjek kajian dari pelbagai perspektif, Barat dan Islam.KEYWORDS: engineering ethics; engineer; akhlaq; values; confidentiality; corruption; conflict of interest; whistle-blowing

  1. Transforming Engineering Education - For Innovation and Development

    DEFF Research Database (Denmark)

    Marjoram, Tony

    2013-01-01

    Engineering and technology are of vital importance in innovation, social and economic development in higher and lower income countries. Development is driven by engineering applications and infrastructure, and most innovations derive from engineering. The last 50 years has seen significant change...... in knowledge production, dissemination and application, and associated needs for engineering, and yet engineering education has changed little over this period. This paper discusses the important role of problem-based learning and humanitarian engineering in promoting the interest, enrolment and retention...... of young people in engineering, and the need to develop policy perspectives on the transformation of engineering education....

  2. Engineering Encounters: Reverse Engineering

    Science.gov (United States)

    McGowan, Veronica Cassone; Ventura, Marcia; Bell, Philip

    2017-01-01

    This column presents ideas and techniques to enhance your science teaching. This month's issue shares information on how students' everyday experiences can support science learning through engineering design. In this article, the authors outline a reverse-engineering model of instruction and describe one example of how it looked in our fifth-grade…

  3. Re-engineering the nuclear medicine residency curriculum in the new era of PET imaging: Perspectives on PET education and training in the Philippine context

    International Nuclear Information System (INIS)

    Pascual, T.N.; Santiago, J.F.; Leus, M.

    2007-01-01

    Full text: There is rapid development in PET Imaging and Molecular Nuclear Medicine. In the context of a residency training program, there is a need to incorporate these technologies in the existing Nuclear Medicine Residency Training Curriculum. This will ensure that trainees are constantly updated with the latest innovations in Nuclear Medicine making them apply this progress in their future practice hence making them achieve the goals and objectives of the curriculum. In residency training programs wherein no PET facilities are existing, these may be remedied by re-engineering the curriculum to include mandatory /electives rotations to other hospitals where the facilities are available. In order to ensure the integrity of the training program in this process of development, a proper sequence of this re-engineering process adhering to educational principles is suggested. These steps reflect the adoption of innovations and developments in the field of Nuclear Medicine essential for nuclear medicine resident learning. Curriculum re-engineering is a scientific and logical method reflecting the processes of addressing changes in the curriculum in order to deliver the desired goals and objectives of the program as dictated by time and innovations. The essential steps in this curriculum re-engineering process, which in this case aim to incorporate and/or update PET Imaging and Molecular Nuclear Imaging education and training, include (1) Curriculum Conceptualization and Legitimatisation, (2) Curriculum Diagnosis, (3) Curriculum Engineering, Designing and Organization, (4) Curriculum Implementation, (5) Curriculum Evaluation, (6) Curriculum Maintenance and (7) Curriculum Re-engineering. All of these sequences consider the participation of the different stakeholders of the training program. They help develop the curriculum, which seeks to promote student learning according to the dictates of the goals and objectives of the program and technology development. Once the

  4. EDITORIAL: Perspectives Perspectives

    Science.gov (United States)

    Dewhurst, Richard

    2011-05-01

    In this issue, we are delighted to publish the second in a series of articles under the banner of Perspectives. The series commenced in late 2008, when Udo Kaatze [1] published an article about the powerful technique of dielectric spectrometry for liquid measurements. In addition to examining the very wide frequency range from 10-6 Hz to 10-13 Hz, an outline of possible future developments was presented. Some challenging tasks for the future were briefly outlined. The format of the article was different to the usual style of a contributed paper or review article. Instead, it represented a short summary of recent work in the field and offered a viewpoint of an expert in the area. Its commentary noted several milestones that had been recently achieved, and then looked to the future. The Perspective format allowed the author to provide some opinion about the challenges of the future not normally permitted in a Topical Review. The journal now intends to publish several more Perspectives. For example, in this issue David Birch [2] presents a Perspective about another important measurement science, namely fluorescence detections and their future directions. These are based on an old technique which provided the basis for detecting the presence of molecular species. Successful research led to an understanding and description of the phenomenon of molecular fluorescence in terms of excited state energies, transitions, symmetries and rate parameters. More recently, using fluorescence as a probe, and with the exploitation of new technologies, new applications have included the study of protein, vision, photosynthesis, membranes and DNA. Indeed nowhere has fluorescence had more impact than in the biosciences. Once again, the intention of the Perspective article has been to highlight recent milestones within the field. Importantly, it also indicates some of the future challenges. Such Perspectives are an occasional series. They are not intended to deflect from the balance of

  5. Layered Systems Engineering Engines

    Science.gov (United States)

    Breidenthal, Julian C.; Overman, Marvin J.

    2009-01-01

    A notation is described for depicting the relationships between multiple, contemporaneous systems engineering efforts undertaken within a multi-layer system-of-systems hierarchy. We combined the concepts of remoteness of activity from the end customer, depiction of activity on a timeline, and data flow to create a new kind of diagram which we call a "Layered Vee Diagram." This notation is an advance over previous notations because it is able to be simultaneously precise about activity, level of granularity, product exchanges, and timing; these advances provide systems engineering managers a significantly improved ability to express and understand the relationships between many systems engineering efforts. Using the new notation, we obtain a key insight into the relationship between project duration and the strategy selected for chaining the systems engineering effort between layers, as well as insights into the costs, opportunities, and risks associated with alternate chaining strategies.

  6. Engineer Ethics

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dae Sik; Kim, Yeong Pil; Kim, Yeong Jin

    2003-03-15

    This book tells of engineer ethics such as basic understanding of engineer ethics with history of engineering as a occupation, definition of engineering and specialized job and engineering, engineer ethics as professional ethics, general principles of ethics and its limitation, ethical theory and application, technique to solve the ethical problems, responsibility, safety and danger, information engineer ethics, biotechnological ethics like artificial insemination, life reproduction, gene therapy and environmental ethics.

  7. Engineer Ethics

    International Nuclear Information System (INIS)

    Lee, Dae Sik; Kim, Yeong Pil; Kim, Yeong Jin

    2003-03-01

    This book tells of engineer ethics such as basic understanding of engineer ethics with history of engineering as a occupation, definition of engineering and specialized job and engineering, engineer ethics as professional ethics, general principles of ethics and its limitation, ethical theory and application, technique to solve the ethical problems, responsibility, safety and danger, information engineer ethics, biotechnological ethics like artificial insemination, life reproduction, gene therapy and environmental ethics.

  8. Moving Toward an Anti-Deficit Perspective: African American Science, Technology, Engineering, Mathematics (STEM) Students at Hispanic-Serving Institutions (HSI)

    Science.gov (United States)

    Mahoney, Melissa M.

    The increased demand for qualified STEM workers, necessitates addressing the bachelor's science, technology, engineering and mathematics (STEM) degree achievement among African Americans and other underrepresented populations. Using inquiry derived from Harper's (2010) Anti-Deficit Achievement Framework, this study sought to explore the factors that contribute to the successful degree completion of African American STEM students within a large comprehensive university system. Coding of the twelve semi-structured interviews revealed six major themes: a) K-12/precollege educational experiences, b) motivation to complete a STEM degree, c) systems of social support, d) extracurricular activities and out-of-class experiences, e) addressing stereotyping and discrimination, and f) faculty behaviors and dispositions. All themes were intertwined at each phase of participants' academic careers, thereby, highlighting the complexity of this population's experience and what is needed to address their low STEM degree attainment. Findings indicated that this student population benefits from positive, sustained faculty-student interactions, holistic STEM success programming, and genuine networks of social support. Furthermore, Harper's framework can be modified to explore the motivation of African American STEM students as well as the African American student's relationship with disability support services.

  9. Chopped basalt fibres: A new perspective in reinforcing poly(lactic acid to produce injection moulded engineering composites from renewable and natural resources

    Directory of Open Access Journals (Sweden)

    P. Tamas

    2013-02-01

    Full Text Available This paper focuses on the reinforcing of Poly(lactic acid with chopped basalt fibres by using silane treated and untreated basalt fibres. Composite materials with 5–10–15–20–30–40 wt% basalt fibre contents were prepared from silane sized basalt fibres using extrusion, and injection moulding, while composites with 5–10–15 wt% basalt fibre contents were also prepared by using untreated basalt fibres as control. The properties of the injection moulded composites were extensively examined by using quasi-static (tensile, three-point bending and dynamic mechanical tests (notched and unnotched Charpy impact tests, dynamic mechanical analysis (DMA, differential scanning calorimetry (DSC, heat deflection temperature (HDT analysis, dimensional stability test, as well as melt flow index (MFI analysis and scanning electron microscopic (SEM observations. It was found that silane treated chopped basalt fibres are much more effective in reinforcing Poly(lactic acid than natural fibres; although basalt fibres are not biodegradable but they are still considered as natural (can be found in nature in the form of volcanic rocks and biologically inert. It is demonstrated in this paper that by using basalt fibre reinforcement, a renewable and natural resource based composite can be produced by injection moulding with excellent mechanical properties suitable even for engineering applications. Finally it was shown that by using adequate drying of the materials, composites with higher mechanical properties can be achieved compared to literature data.

  10. Market Dominance and Search Quality in the Search Engine Market

    NARCIS (Netherlands)

    Lianos, I.; Motchenkova, E.I.

    2013-01-01

    We analyze a search engine market from a law and economics perspective and incorporate the choice of quality-improving innovations by a search engine platform in a two-sided model of Internet search engine. In the proposed framework, we first discuss the legal issues the search engine market raises

  11. Advanced Control of Turbofan Engines

    CERN Document Server

    Richter, Hanz

    2012-01-01

    Advanced Control of Turbofan Engines describes the operational performance requirements of turbofan (commercial)engines from a controls systems perspective, covering industry-standard methods and research-edge advances. This book allows the reader to design controllers and produce realistic simulations using public-domain software like CMAPSS: Commercial Modular Aero-Propulsion System Simulation, whose versions are released to the public by NASA. The scope of the book is centered on the design of thrust controllers for both steady flight and transient maneuvers. Classical control theory is not dwelled on, but instead an introduction to general undergraduate control techniques is provided. This book also: Develops a thorough understanding of the challenges associated with engine operability from a control systems perspective, describing performance demands and operational constraints into the framework and language of modern control theory Presents solid theoretical support for classical and advanced engine co...

  12. Solid-state laser engineering

    CERN Document Server

    Koechner, Walter

    1988-01-01

    Solid-State Laser Engineering is written from an industrial perspective and discusses in detail the characteristics, design, construction and practical problems of solid-state lasers. Emphasis is placed on engineering and practical considerations, with a phenomenological treatment using modelsbeing preferred to abstract mathematical derivations. This new edition has been updated and revised to include important developments, concepts and technologies that have emerged since the publication of the first edition.

  13. Helene ve Güzel Helena Adlı Oyunların Konu Bakımından Karşılaştırılması

    OpenAIRE

    ZERENLER, Dilek

    2005-01-01

    Mitoloji her dönemde tiyatronun başvurduğu bir malzeme olmuştur. Esere kazandırdığı zenginlik,yarattığı düş gücüyle okura farklı bir dünya sunulmasını sağlar. Her yazar bu malzemeyi kendi çağının gereğine göre veya benimsediği dünya görüşü doğrultusunda yorumlar.Bu çalışmada MÖ 5. yüzyılda yaşayan Euripidesin Helene adlı oyunu ile 20. yüzyılın önemli yazarlarından Selahattin Batunun Güzel Helena adlı oyunu konu bakımından karşılaştırılarak her iki yazarın aynı efsaneyi ele alış biçimleri ve d...

  14. Mechanical engineering

    CERN Document Server

    Darbyshire, Alan

    2010-01-01

    Alan Darbyshire's best-selling text book provides five-star high quality content to a potential audience of 13,000 engineering students. It explains the most popular specialist units of the Mechanical Engineering, Manufacturing Engineering and Operations & Maintenance Engineering pathways of the new 2010 BTEC National Engineering syllabus. This challenging textbook also features contributions from specialist lecturers, ensuring that no stone is left unturned.

  15. International Perspectives.

    Science.gov (United States)

    Allen, Kenn; Habermann, Ulla; Chowdhury, Omar Faruque; Guerra, Iraida Manzanilla

    1998-01-01

    Includes "Introduction to International Perspectives" (Allen); "Volunteerism in the Welfare State: The Case of Denmark" (Habermann); "Grassroots Organizing in Bangladesh" (Chowdhury); and "Volunteerism in Latin America" (Guerra). (SK)

  16. Engineer's Notebook--A Design Assessment Tool

    Science.gov (United States)

    Kelley, Todd R.

    2011-01-01

    As technology education continues to consider a move toward an engineering design focus as proposed by various leaders in technology education, it will be necessary to employ new pedagogical approaches. Hill (2006) provided some new perspectives regarding pedagogical approaches for technology education with an engineering design focus. One…

  17. Metabolic engineering of terpenoid biosynthesis in plants

    NARCIS (Netherlands)

    Aharoni, A.; Jongsma, M.A.; Kim, T.Y.; Ri, M.B.; Giri, A.P.; Verstappen, F.W.A.; Schwab, W.; Bouwmeester, H.J.

    2006-01-01

    Metabolic engineering of terpenoids in plants is a fascinating research topic from two main perspectives. On the one hand, the various biological activities of these compounds make their engineering a new tool for improving a considerable number of traits in crops. These include for example enhanced

  18. Getting Context Back in Engineering Education

    DEFF Research Database (Denmark)

    Buch, Anders; Bucciarelli, Louis

    2013-01-01

    and it is in fact counterproductive to let tight disciplinary framings- and strict 'object world' perspectives - be the only avenue to 'problem solving'. By introducing cases from engineering and scientific practice we will illustrate how the perspectives of the Humanities and Social Sciences can be brought to bear......History reveals a number academically inclined engineers and others who have found engineering education lacking. The critics support their claim with diverse arguments and propose different reform initiatives (Buch 2012). Though the motivation varies the critics seems to agree on broadening...... engineering education. In this paper we will discuss issues of curriculum, pedagogics and - most importantly learning - in engineering education. We tend to agree with the critics that there is a need to broaden engineering education. We also suggest that this broadening of the curriculum should be backed up...

  19. Industrial Engineering

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally).......Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally)....

  20. Engineering _ litteraturliste

    DEFF Research Database (Denmark)

    Sillasen, Martin Krabbe; Daugbjerg, Peer; Nielsen, Keld

    2017-01-01

    Litteraturliste udarbejdet som grundlag for artiklen ”Engineering – svaret på naturfagenes udfordringer?”......Litteraturliste udarbejdet som grundlag for artiklen ”Engineering – svaret på naturfagenes udfordringer?”...

  1. Proper body mechanics from an engineering perspective.

    Science.gov (United States)

    Mohr, Edward G

    2010-04-01

    The economic viability of the manual therapy practitioner depends on the number of massages/treatments that can be given in a day or week. Fatigue or injuries can have a major impact on the income potential and could ultimately reach the point which causes the practitioner to quit the profession, and seek other, less physically demanding, employment. Manual therapy practitioners in general, and massage therapists in particular, can utilize a large variety of body postures while giving treatment to a client. The hypothesis of this paper is that there is an optimal method for applying force to the client, which maximizes the benefit to the client, and at the same time minimizes the strain and effort required by the practitioner. Two methods were used to quantifiably determine the effect of using "poor" body mechanics (Improper method) and "best" body mechanics (Proper/correct method). The first approach uses computer modeling to compare the two methods. Both postures were modeled, such that the biomechanical effects on the practitioner's elbow, shoulder, hip, knee and ankle joints could be calculated. The force applied to the client, along with the height and angle of application of the force, was held constant for the comparison. The second approach was a field study of massage practitioners (n=18) to determine their maximal force capability, again comparing methods using "Improper and Proper body mechanics". Five application methods were tested at three different application heights, using a digital palm force gauge. Results showed that there was a definite difference between the two methods, and that the use of correct body mechanics can have a large impact on the health and well being of the massage practitioner over both the short and long term. Copyright 2009 Elsevier Ltd. All rights reserved.

  2. Game Engineering a Multiagent Systems Perspective

    Science.gov (United States)

    2016-07-21

    of  research  in   the  field   of  algorithmic   game   theory  devoted  to  analyzing  the  inefficiency   of ...Handbook   of   Game   Theory ,  Volume  IV,  edited  by  Peyton  Young  and  Shmuel  Zamir,   Elsevier  Science,  2014... Game   Theory  and  Distributed  Control,”  Handbook

  3. Rehabilitation robotics: an academic engineer perspective.

    Science.gov (United States)

    Krebs, Hermano I

    2011-01-01

    In this paper, we present a retrospective review of our efforts to revolutionize the way physical medicine is practiced by developing and deploying rehabilitation robots. We present a sample of our clinical results with well over 600 stroke patients, both inpatients and outpatients. We discuss the different robots developed at our laboratory over the past 20 years and their unique characteristics. All are configured both to deliver reproducible interactive therapy and also to measure outcomes with minimal encumbrance, thus providing critical measurement tools to help unravel the key remaining question: what constitutes "best practice"? While success to date indicates that this therapeutic application of robots has opened an emerging new frontier in physical medicine and rehabilitation, the barrier to further progress lies not in developing new hardware but rather in finding the most effective way to enhance neuro-recovery. We close this manuscript discussing some of the tools required for advancing the effort beyond the present state to what we believe will be the central feature of research during the next 10 years.

  4. Engineering Motion

    Science.gov (United States)

    Tuttle, Nicole; Stanley, Wendy; Bieniek, Tracy

    2016-01-01

    For many teachers, engineering can be intimidating; teachers receive little training in engineering, particularly those teaching early elementary students. In addition, the necessity of differentiating for students with special needs can make engineering more challenging to teach. This article describes a professional development program…

  5. PRIORIDADES DE RESTAURACIÓN ECOLÓGICA DEL SUELO Y SUS SERVICIOS ECOSISTÉMICOS ASOCIADOS, DEGRADADOS POR USO AGROPECUARIO EN LA MICROCUENCA SANTA HELENA (SUESCA-CUNDINAMARCA

    Directory of Open Access Journals (Sweden)

    MILENA CASTRO-ROMERO

    2014-06-01

    Full Text Available Se detectó, por medio del análisis del estado de conservación de los ecosistemas de la microcuenca Santa Helena, que el uso agropecuario intenso ha ocasionado una disminución de los servicios ecosistémicos del suelo (SES, lo cual puede poner en peligro la estabilidad económica y la seguridad alimentaria de las comunidades locales que dependen de ellos. El análisis permitió identificar las prioridades de restauración ecológica (RE del suelo y sus servicios ecosistémicos asociados necesarias para su recuperación. Se estimó el nivel de conservación del suelo (NCS para prestar servicios ecosistémicos, se halló el valor económico de los suelos (VES y se definieron prioridades de restauración del suelo para cada caso. Para los NCS se definieron cuatro niveles que permitieron calificar el 10.2% del área de la microcuenca con nivel de conservación (NCS muy bajo, el 53% con NCS medio y 23.6% con NCS alto. Para el VES se definieron tres niveles que aplicados a las 43 Unidades de Paisaje (UPs consideradas para la microcuenca, permiten diferenciarlas económicamente como de VES bajo (18 UPs, VES medio (9 UPs, VES alto (8UPs y VES muy alto (8 UPs. La prioridad de restauración muy alta se evidenció en las UPs con VES bajo y con NCS bajo y muy bajo. Las UPs con VES alto y NCS alto presentaron baja prioridad de restauración.

  6. Association of breakfast consumption with objectively measured and self-reported physical activity, sedentary time and physical fitness in European adolescents: the HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) Study.

    Science.gov (United States)

    Cuenca-García, Magdalena; Ruiz, Jonatan R; Ortega, Francisco B; Labayen, Idoia; González-Gross, Marcela; Moreno, Luis A; Gomez-Martinez, Sonia; Ciarapica, Donatella; Hallström, Lena; Wästlund, Acki; Molnar, Dénes; Gottrand, Frederic; Manios, Yannis; Widhalm, Kurt; Kafatos, Anthony; De Henauw, Stefaan; Sjöström, Michael; Castillo, Manuel J

    2014-10-01

    To examine the association of breakfast consumption with objectively measured and self-reported physical activity, sedentary time and physical fitness. The HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) Cross-Sectional Study. Breakfast consumption was assessed by two non-consecutive 24 h recalls and by a 'Food Choices and Preferences' questionnaire. Physical activity, sedentary time and physical fitness components (cardiorespiratory fitness, muscular fitness and speed/agility) were measured and self-reported. Socio-economic status was assessed by questionnaire. Ten European cities. Adolescents (n 2148; aged 12·5-17·5 years). Breakfast consumption was not associated with measured or self-reported physical activity. However, 24 h recall breakfast consumption was related to measured sedentary time in males and females; although results were not confirmed when using other methods to assess breakfast patterns or sedentary time. Breakfast consumption was not related to muscular fitness and speed/agility in males and females. However, male breakfast consumers had higher cardiorespiratory fitness compared with occasional breakfast consumers and breakfast skippers, while no differences were observed in females. Overall, results were consistent using different methods to assess breakfast consumption or cardiorespiratory fitness (all P ≤ 0·005). In addition, both male and female breakfast skippers (assessed by 24 h recall) were less likely to have high measured cardiorespiratory fitness compared with breakfast consumers (OR = 0·33; 95% CI 0·18, 0·59 and OR = 0·56; 95%CI 0·32, 0·98, respectively). Results persisted across methods. Skipping breakfast does not seem to be related to physical activity, sedentary time or muscular fitness and speed/agility as physical fitness components in European adolescents; yet it is associated with both measured and self-reported cardiorespiratory fitness, which extends previous findings.

  7. Computational engineering

    CERN Document Server

    2014-01-01

    The book presents state-of-the-art works in computational engineering. Focus is on mathematical modeling, numerical simulation, experimental validation and visualization in engineering sciences. In particular, the following topics are presented: constitutive models and their implementation into finite element codes, numerical models in nonlinear elasto-dynamics including seismic excitations, multiphase models in structural engineering and multiscale models of materials systems, sensitivity and reliability analysis of engineering structures, the application of scientific computing in urban water management and hydraulic engineering, and the application of genetic algorithms for the registration of laser scanner point clouds.

  8. Tissue engineering

    CERN Document Server

    Fisher, John P; Bronzino, Joseph D

    2007-01-01

    Increasingly viewed as the future of medicine, the field of tissue engineering is still in its infancy. As evidenced in both the scientific and popular press, there exists considerable excitement surrounding the strategy of regenerative medicine. To achieve its highest potential, a series of technological advances must be made. Putting the numerous breakthroughs made in this field into a broad context, Tissue Engineering disseminates current thinking on the development of engineered tissues. Divided into three sections, the book covers the fundamentals of tissue engineering, enabling technologies, and tissue engineering applications. It examines the properties of stem cells, primary cells, growth factors, and extracellular matrix as well as their impact on the development of tissue engineered devices. Contributions focus on those strategies typically incorporated into tissue engineered devices or utilized in their development, including scaffolds, nanocomposites, bioreactors, drug delivery systems, and gene t...

  9. Engineering the smart factory

    Science.gov (United States)

    Harrison, Robert; Vera, Daniel; Ahmad, Bilal

    2016-10-01

    The fourth industrial revolution promises to create what has been called the smart factory. The vision is that within such modular structured smart factories, cyber-physical systems monitor physical processes, create a virtual copy of the physical world and make decentralised decisions. This paper provides a view of this initiative from an automation systems perspective. In this context it considers how future automation systems might be effectively configured and supported through their lifecycles and how integration, application modelling, visualisation and reuse of such systems might be best achieved. The paper briefly describes limitations in current engineering methods, and new emerging approaches including the cyber physical systems (CPS) engineering tools being developed by the automation systems group (ASG) at Warwick Manufacturing Group, University of Warwick, UK.

  10. Engineering grand challenges and the attributes of the global engineer

    DEFF Research Database (Denmark)

    Guerra, Aida; Ulseth, Ron; Jonhson, Bart

    2017-01-01

    Technology has been changing world in ways never imagined. The ever-evolving society and rapid development posed different demands and challenges to the engineering profession. Addressing these challenges means to re-vision and reform the ways we educate future engineers and the attributes need...... to be enhanced. This paper reports a literature review with aim to (1) understand the different stakeholders’ perspectives, namely students, educators, and employers, (2) understand the profile of the global engineer (i.e. knowledge, competences and skills), and (3) outline and discuss learning strategies....... As a result, the paper presents the main gaps in the existing knowledge, formulates research hypothesis, and proposes a research design for a follow up empirical study to investigate further the engineering grand challenges, the attributes needed to solve them, and the learning environments required....

  11. Engineering grand challenges and the attributes of the global engineer

    DEFF Research Database (Denmark)

    Guerra, Aida; Ulseth, Ron; Jonhson, Bart

    2017-01-01

    to be enhanced. This paper reports a literature review with aim to (1) understand the different stakeholders’ perspectives, namely students, educators, and employers, (2) understand the profile of the global engineer (i.e. knowledge, competences and skills), and (3) outline and discuss learning strategies......Technology has been changing world in ways never imagined. The ever-evolving society and rapid development posed different demands and challenges to the engineering profession. Addressing these challenges means to re-vision and reform the ways we educate future engineers and the attributes need....... As a result, the paper presents the main gaps in the existing knowledge, formulates research hypothesis, and proposes a research design for a follow up empirical study to investigate further the engineering grand challenges, the attributes needed to solve them, and the learning environments required....

  12. Invisible Engineers

    Science.gov (United States)

    Ohashi, Hideo

    Questionnaire to ask “mention three names of scientists you know” and “three names of engineers you know” was conducted and the answers from 140 adults were analyzed. The results indicated that the image of scientists is represented by Nobel laureates and that of engineers by great inventors like Thomas Edison and industry founders like Soichiro Honda. In order to reveal the image of engineers among young generation, questionnaire was conducted for pupils in middle and high schools. Answers from 1,230 pupils were analyzed and 226 names mentioned as engineers were classified. White votes reached 60%. Engineers who are neither big inventors nor company founders collected less than 1% of named votes. Engineers are astonishingly invisible from young generation. Countermeasures are proposed.

  13. Engineering mechanics

    CERN Document Server

    Gross, Dietmar; Schröder, Jörg; Wall, Wolfgang A; Rajapakse, Nimal

    Statics is the first volume of a three-volume textbook on Engineering Mechanics. The authors, using a time-honoured straightforward and flexible approach, present the basic concepts and principles of mechanics in the clearest and simplest form possible to advanced undergraduate engineering students of various disciplines and different educational backgrounds. An important objective of this book is to develop problem solving skills in a systematic manner. Another aim of this volume is to provide engineering students as well as practising engineers with a solid foundation to help them bridge the gap between undergraduate studies on the one hand and advanced courses on mechanics and/or practical engineering problems on the other. The book contains numerous examples, along with their complete solutions. Emphasis is placed upon student participation in problem solving. The contents of the book correspond to the topics normally covered in courses on basic engineering mechanics at universities and colleges. Now in i...

  14. Innovations and research perspectives; Innovations et perspectives de recherche

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This conference day was organized by the air-conditioning engineering section of the French association of thermal engineers. This book of proceedings contains 7 papers entitled: `Clima 2000: conclusions and perspectives`; `normative approach of the different aspects of ambience comfort`; `progress of the local discomfort evaluation methods`; `towards a global approach of air conditioning of buildings`; `simulation of the energy behaviour of industrial entities. Statement of real actions and methodological evolutions`; `modeling and simulation: state-of-the-art`; `automatized generation of a thermal and aeraulic simulation in buildings`. (J.S.)

  15. Human engineering

    International Nuclear Information System (INIS)

    Yang, Seong Hwan; Park, Bum; Gang, Yeong Sik; Gal, Won Mo; Baek, Seung Ryeol; Choe, Jeong Hwa; Kim, Dae Sung

    2006-07-01

    This book mentions human engineering, which deals with introduction of human engineering, Man-Machine system like system design, and analysis and evaluation of Man-Machine system, data processing and data input, display, system control of man, human mistake and reliability, human measurement and design of working place, human working, hand tool and manual material handling, condition of working circumstance, working management, working analysis, motion analysis working measurement, and working improvement and design in human engineering.

  16. Information engineering

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, D.N.

    1997-02-01

    The Information Engineering thrust area develops information technology to support the programmatic needs of Lawrence Livermore National Laboratory`s Engineering Directorate. Progress in five programmatic areas are described in separate reports contained herein. These are entitled Three-dimensional Object Creation, Manipulation, and Transport, Zephyr:A Secure Internet-Based Process to Streamline Engineering Procurements, Subcarrier Multiplexing: Optical Network Demonstrations, Parallel Optical Interconnect Technology Demonstration, and Intelligent Automation Architecture.

  17. Engineering Electromagnetics

    International Nuclear Information System (INIS)

    Kim, Se Yun

    2009-01-01

    This book deals with engineering electromagnetics. It contains seven chapters, which treats understanding of engineering electromagnetics such as magnet and electron spin, current and a magnetic field and an electromagnetic wave, Essential tool for engineering electromagnetics on rector and scalar, rectangular coordinate system and curl vector, electrostatic field with coulomb rule and method of electric images, Biot-Savart law, Ampere law and magnetic force, Maxwell equation and an electromagnetic wave and reflection and penetration of electromagnetic plane wave.

  18. Neural engineering

    CERN Document Server

    2013-01-01

    Neural Engineering, 2nd Edition, contains reviews and discussions of contemporary and relevant topics by leading investigators in the field. It is intended to serve as a textbook at the graduate and advanced undergraduate level in a bioengineering curriculum. This principles and applications approach to neural engineering is essential reading for all academics, biomedical engineers, neuroscientists, neurophysiologists, and industry professionals wishing to take advantage of the latest and greatest in this emerging field.

  19. Engineering tribology

    CERN Document Server

    Stachowiak, Gwidon; Batchelor, A W; Batchelor, Andrew W

    2005-01-01

    As with the previous edition, the third edition of Engineering Tribology provides a thorough understanding of friction and wear using technologies such as lubrication and special materials. Tribology is a complex topic with its own terminology and specialized concepts, yet is vitally important throughout all engineering disciplines, including mechanical design, aerodynamics, fluid dynamics and biomedical engineering. This edition includes updated material on the hydrodynamic aspects of tribology as well as new advances in the field of biotribology, with a focus throughout on the engineering ap

  20. Genetic Engineering

    Science.gov (United States)

    Phillips, John

    1973-01-01

    Presents a review of genetic engineering, in which the genotypes of plants and animals (including human genotypes) may be manipulated for the benefit of the human species. Discusses associated problems and solutions and provides an extensive bibliography of literature relating to genetic engineering. (JR)

  1. Corrosion Engineering.

    Science.gov (United States)

    White, Charles V.

    A description is provided for a Corrosion and Corrosion Control course offered in the Continuing Engineering Education Program at the General Motors Institute (GMI). GMI is a small cooperative engineering school of approximately 2,000 students who alternate between six-week periods of academic study and six weeks of related work experience in…

  2. Systems Engineering

    Science.gov (United States)

    Pellerano, Fernando

    2015-01-01

    This short course provides information on what systems engineering is and how the systems engineer guides requirements, interfaces with the discipline leads, and resolves technical issues. There are many system-wide issues that either impact or are impacted by the thermal subsystem. This course will introduce these issues and illustrate them with real life examples.

  3. Fluids engineering

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    Fluids engineering has played an important role in many applications, from ancient flood control to the design of high-speed compact turbomachinery. New applications of fluids engineering, such as in high-technology materials processing, biotechnology, and advanced combustion systems, have kept up unwaining interest in the subject. More accurate and sophisticated computational and measurement techniques are also constantly being developed and refined. On a more fundamental level, nonlinear dynamics and chaotic behavior of fluid flow are no longer an intellectual curiosity and fluid engineers are increasingly interested in finding practical applications for these emerging sciences. Applications of fluid technology to new areas, as well as the need to improve the design and to enhance the flexibility and reliability of flow-related machines and devices will continue to spur interest in fluids engineering. The objectives of the present seminar were: to exchange current information on arts, science, and technology of fluids engineering; to promote scientific cooperation between the fluids engineering communities of both nations, and to provide an opportunity for the participants and their colleagues to explore possible joint research programs in topics of high priority and mutual interest to both countries. The Seminar provided an excellent forum for reviewing the current state and future needs of fluids engineering for the two nations. With the Seminar ear-marking the first formal scientific exchange between Korea and the United States in the area of fluids engineering, the scope was deliberately left broad and general

  4. Food Engineering

    NARCIS (Netherlands)

    Boom, R.M.; Janssen, A.E.M.

    2014-01-01

    Food engineering is a rapidly changing discipline. Traditionally, the main focus was on food preservation and stabilization, whereas trends now are on diversity, health, taste, and sustainable production. Next to a general introduction of the definition of food engineering, this article gives a

  5. Biomedical Engineering

    CERN Document Server

    Suh, Sang C; Tanik, Murat M

    2011-01-01

    Biomedical Engineering: Health Care Systems, Technology and Techniques is an edited volume with contributions from world experts. It provides readers with unique contributions related to current research and future healthcare systems. Practitioners and researchers focused on computer science, bioinformatics, engineering and medicine will find this book a valuable reference.

  6. Emotional engineering

    CERN Document Server

    In an age of increasing complexity, diversification and change, customers expect services that cater to their needs and to their tastes. Emotional Engineering vol 2. describes how their expectations can be satisfied and managed throughout the product life cycle, if producers focus their attention more on emotion. Emotional engineering provides the means to integrate products to create a new social framework and develops services beyond product realization to create of value across a full lifetime.  14 chapters cover a wide range of topics that can be applied to product, process and industry development, with special attention paid to the increasing importance of sensing in the age of extensive and frequent changes, including: • Multisensory stimulation and user experience  • Physiological measurement • Tactile sensation • Emotional quality management • Mental model • Kansei engineering.   Emotional Engineering vol 2 builds on Dr Fukuda’s previous book, Emotional Engineering, and provides read...

  7. The Pursuit of Chronically Reliable Neural Interfaces: A Materials Perspective.

    Science.gov (United States)

    Guo, Liang

    2016-01-01

    Brain-computer interfaces represent one of the most astonishing technologies in our era. However, the grand challenge of chronic instability and limited throughput of the electrode-tissue interface has significantly hindered the further development and ultimate deployment of such exciting technologies. A multidisciplinary research workforce has been called upon to respond to this engineering need. In this paper, I briefly review this multidisciplinary pursuit of chronically reliable neural interfaces from a materials perspective by analyzing the problem, abstracting the engineering principles, and summarizing the corresponding engineering strategies. I further draw my future perspectives by extending the proposed engineering principles.

  8. Designed by Engineers: An analysis of interactionaries with engineering students

    Directory of Open Access Journals (Sweden)

    Henrik Artman

    2014-12-01

    Full Text Available The aim of this study is to describe and analyze learning taking place in a collaborative design exercise involving engineering students. The students perform a time-constrained, open-ended, complex interaction design task, an “interactionary”. A multimodal learning perspective is used. We have performed detailed analyses of video recordings of the engineering students, including classifying aspects of interaction. Our results show that the engineering students carry out and articulate their design work using a technology-centred approach and focus more on the function of their designs than on aspects of interaction. The engineering students mainly make use of ephemeral communication strategies (gestures and speech rather than sketching in physical materials. We conclude that the interactionary may be an educational format that can help engineering students learn the messiness of design work. We further identify several constraints to the engineering students’ design learning and propose useful interventions that a teacher could make during an interactionary. We especially emphasize interventions that help engineering students-retain aspects of human-centered design throughout the design process. This study partially replicates a previous study which involved interaction design students.

  9. Requirements Engineering

    CERN Document Server

    Hull, Elizabeth; Dick, Jeremy

    2011-01-01

    Written for those who want to develop their knowledge of requirements engineering process, whether practitioners or students.Using the latest research and driven by practical experience from industry, Requirements Engineering gives useful hints to practitioners on how to write and structure requirements. It explains the importance of Systems Engineering and the creation of effective solutions to problems. It describes the underlying representations used in system modeling and introduces the UML2, and considers the relationship between requirements and modeling. Covering a generic multi-layer r

  10. Engineering mathematics

    CERN Document Server

    Bird, John

    2014-01-01

    A practical introduction to the core mathematics required for engineering study and practiceNow in its seventh edition, Engineering Mathematics is an established textbook that has helped thousands of students to succeed in their exams.John Bird's approach is based on worked examples and interactive problems. This makes it ideal for students from a wide range of academic backgrounds as the student can work through the material at their own pace. Mathematical theories are explained in a straightforward manner, being supported by practical engineering examples and applications in order to ensure

  11. Coastal Engineering

    NARCIS (Netherlands)

    Van der Velden, E.T.J.M.

    1989-01-01

    Introduction, waves, sediment transport, littoral transport, lonshore sediment transport, onshore-offshore sediment transport, coastal changes, dune erosion and storm surges, sedimentation in channels and trenches, coastal engineering in practice.

  12. Software engineering

    CERN Document Server

    Sommerville, Ian

    2016-01-01

    For courses in computer science and software engineering The Fundamental Practice of Software Engineering Software Engineering introduces readers to the overwhelmingly important subject of software programming and development. In the past few years, computer systems have come to dominate not just our technological growth, but the foundations of our world's major industries. This text seeks to lay out the fundamental concepts of this huge and continually growing subject area in a clear and comprehensive manner. The Tenth Edition contains new information that highlights various technological updates of recent years, providing readers with highly relevant and current information. Sommerville's experience in system dependability and systems engineering guides the text through a traditional plan-based approach that incorporates some novel agile methods. The text strives to teach the innovators of tomorrow how to create software that will make our world a better, safer, and more advanced place to live.

  13. Nuclear Engineering

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    The Nuclear Engineering Division is engaged in both teaching and research. Staff members teach both graduate and undergraduate courses at the UPR Mayaguez Campus and direct the thesis work of nuclear engineering students. They do research on their own projects and assist the staff of other PRNC divisions as the need arises. The scientists on the Division's staff all hold joint appointments at PRNC and UPR, and they make up the faculty of the UPR Nuclear Engineering Department, the Head of the PRNC Division being also the Chairman of the UPR Department. The Division provides the classrooms, offices, laboratories and equipment, and most of the administrative personnel required for the education and training of the graduate students at the UPR Nuclear Engineering Department

  14. Harmonic engine

    Science.gov (United States)

    Bennett, Charles L [Livermore, CA

    2009-10-20

    A high efficiency harmonic engine based on a resonantly reciprocating piston expander that extracts work from heat and pressurizes working fluid in a reciprocating piston compressor. The engine preferably includes harmonic oscillator valves capable of oscillating at a resonant frequency for controlling the flow of working fluid into and out of the expander, and also preferably includes a shunt line connecting an expansion chamber of the expander to a buffer chamber of the expander for minimizing pressure variations in the fluidic circuit of the engine. The engine is especially designed to operate with very high temperature input to the expander and very low temperature input to the compressor, to produce very high thermal conversion efficiency.

  15. Green Engineering

    Science.gov (United States)

    Green Engineering is the design, commercialization and use of processes and products that are feasible and economical while reducing the generation of pollution at the source and minimizing the risk to human health and the environment.

  16. Engineering personnel

    International Nuclear Information System (INIS)

    Paskievici, W.

    The expansion of nuclear power is taxing human, material, and capital resources in developed and developing countries. This paper explores the human resources as represented by employment, graduation statistics, and educational curricula for nuclear engineers. (E.C.B.)

  17. Crystal Engineering

    Indian Academy of Sciences (India)

    Nangia (2002). “Today, research areas under the wide umbrella of crystal engineering include: supramolecular synthesis; nanotechnology; separation science and catalysis; supramolecular materials and devices; polymorphism; cocrystals, crystal structure prediction; drug design and ligand–protein binding.”

  18. Geoenvironmental engineering

    International Nuclear Information System (INIS)

    Shin, Eun Cheol; Park, Jeong Jun

    2009-08-01

    This book deals with definition of soil and scope of clean-up of soil, trend of geoenvironmental engineering at home and foreign countries, main concern of geoenvironmental engineering in domestic and abroad, design and building of landfills such as summary, trend of landfill policy in Korea, post management of landfill facilities, stabilizing and stability of landfill, research method and soil pollution source, restoration technology of soil pollution like restoration technique of oil pollution with thermal processing.

  19. Reliability Engineering

    International Nuclear Information System (INIS)

    Lee, Sang Yong

    1992-07-01

    This book is about reliability engineering, which describes definition and importance of reliability, development of reliability engineering, failure rate and failure probability density function about types of it, CFR and index distribution, IFR and normal distribution and Weibull distribution, maintainability and movability, reliability test and reliability assumption in index distribution type, normal distribution type and Weibull distribution type, reliability sampling test, reliability of system, design of reliability and functionality failure analysis by FTA.

  20. Microwave engineering

    CERN Document Server

    Pozar, David M

    2012-01-01

    The 4th edition of this classic text provides a thorough coverage of RF and microwave engineering concepts, starting from fundamental principles of electrical engineering, with applications to microwave circuits and devices of practical importance.  Coverage includes microwave network analysis, impedance matching, directional couplers and hybrids, microwave filters, ferrite devices, noise, nonlinear effects, and the design of microwave oscillators, amplifiers, and mixers. Material on microwave and RF systems includes wireless communications, radar, radiometry, and radiation hazards. A large

  1. Reconciling White-Box and Black-Box Perspectives on Behavioral Self-adaptation

    DEFF Research Database (Denmark)

    Bruni, Roberto; Corradini, Andrea; Gadducci, Fabio

    2015-01-01

    This paper proposes to reconcile two perspectives on behavioral adaptation commonly taken at different stages of the engineering of autonomic computing systems. Requirements engineering activities often take a black-box perspective: A system is considered to be adaptive with respect to an environ...

  2. Bridging Resilience Engineering and Human Reliability Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ronald L. Boring

    2010-06-01

    There has been strong interest in the new and emerging field called resilience engineering. This field has been quick to align itself with many existing safety disciplines, but it has also distanced itself from the field of human reliability analysis. To date, the discussion has been somewhat one-sided, with much discussion about the new insights afforded by resilience engineering. This paper presents an attempt to address resilience engineering from the perspective of human reliability analysis (HRA). It is argued that HRA shares much in common with resilience engineering and that, in fact, it can help strengthen nascent ideas in resilience engineering. This paper seeks to clarify and ultimately refute the arguments that have served to divide HRA and resilience engineering.

  3. Aging Perspectives

    OpenAIRE

    Theodore D Cosco; David Brehme; Nora Grigoruta; Lisa-Katrin Kaufmann; Liis Lemsalu; Ruth Meex; Angela Schuurmans; Neslihan Sener

    2014-01-01

    Despite the proliferation of successful ageing (SA) research, the literature is dominated by researcher-driven Anglophone conceptualisations. To date, lay perspectives of SA have not been examined in Europe or Turkey. The current study aims to conduct a mixed-methods examination of conceptualisations of SA in seven underrepresented countries. Using snowball sampling via social media sites, an online survey consisting of established closed-ended and open-ended items – translated into seven lan...

  4. Examining elementary students' perceptions of engineers

    Science.gov (United States)

    Oware, Euridice A.

    There has been a national focus on improving K-12 Science, Technology, Engineering, and Mathematics (STEM) education. The integration of engineering education from kindergarten through high school (K-12) has been identified as key to sustaining the U.S. economy and standard of living. Misconceptions about the nature of engineering may deter children from even considering this profession. Currently, there are few research studies on young children's perceptions of engineers, and such research can be used to support children along STEM pathways. The purpose of this research was to investigate elementary students' perceptions of engineers for children enrolled in a gifted and talented outreach program. Participants included students enrolled in two structural engineering classes: one for 3rd and 4th graders and another for 5th and 6th grade students. Participants represented an age group that is not typically exposed to engineering. This research was framed within a constructivist theoretical framework, and qualitative research methods were utilized to develop a rich understanding of the perspectives of students enrolled in the engineering classes. Data collection included student pre- and post-questionnaires, Draw-an-Engineer tasks, and semi-structured interviews. Data analysis entailed the use of open and axial coding. Trustworthiness of data was determined through triangulation of multiple data sources. Results demonstrated how children describe the work of engineers, objects associated with engineering, tools used or created by engineers, and professional characteristics of engineers. In addition, images of engineers were discussed and influences on students' perceptions of engineers were identified. The findings of this study have implications for the development of formal and informal K-12 curricula and programs that focus on improving students' understanding and engagement in engineering. Implications for researchers interested in studying children

  5. Solid-state laser engineering

    CERN Document Server

    Koechner, Walter

    1992-01-01

    This book is written from an industrial perspective and provides a detailed discussion of solid-state lasers, their characteristics, design and construction. Emphasis is placed on engineering and practical considerations. The book is aimed mainly at the practicing scientist or engineer who is interested in the design or use of solid-state lasers, but the comprehensive treatment of the subject will make the work useful also to students of laser physics who seek to supplement their theoretical knowledge with engineering information. In order to present the subject as clearly as possible, phenomenological descriptions using models have been used rather than abstract mathematical descriptions. This results in a simplified presentation. The descriptions are enhanced by the inclusion of numerical and technical data, tables and graphs. This new edition has been updated and revised to take account of important new developments, concepts, and technologies that have emerged since the publication of the first and second...

  6. Solid-State Laser Engineering

    CERN Document Server

    Koechner, Walter

    2006-01-01

    Written from an industrial perspective, Solid-State Laser Engineering discusses in detail the characteristics, design, construction, and performance of solid-state lasers. Emphasis is placed on engineering and practical considerations; phenomenological aspects using models are preferred to abstract mathematical derivations. Since its first edition almost 30 years ago this book has become the standard in the field of solid-state lasers for scientists,engineers and graduate students. This new edition has been extensively revised and updated to account for recent developments in the areas of diode-laser pumping, laser materials and nonlinear crystals. Completely new sections have been added dealing with frequency control, the theory of mode-locking, femto second lasers, high efficiency harmonic generation, passive and acousto-optic Q-switching, semiconductor saturable absorber mirrors (SESAM) and peridically poled nonlinear crystals.

  7. Solid-state laser engineering

    CERN Document Server

    Koechner, Walter

    1996-01-01

    Solid-State Laser Engineering, written from an industrial perspective, discusses in detail the characteristics, design, construction, and performance of solid-state lasers. Emphasis is placed on engineering and practical considerations; phenomenological aspects using models are preferred to abstract mathematical derivations. This new edition has extensively been updated to account for recent developments in the areas of diode-laser pumping, mode locking, ultrashort-pulse generation etc. Walter Koechner received a doctorate in Electrical Engineering from the University of Technology in Vienna, Austria, in 1965. He has published numerous papers in the fields of solid-state physics, optics, and lasers. Dr. Koechner is founder and president of Fibertek, Inc., a research firm specializing in the design, development, and production of advanced solid-state lasers, optical radars, and remote-sensing systems.

  8. Perspectives on Social Media: A Yearbook

    NARCIS (Netherlands)

    Kommers, Petrus A.M.; Isaias, Pedro; Issa, Tomayess

    2015-01-01

    Perspectives on Social Media presents the most current research on the effectiveness of social media across sectors. Progress in finding better applications for social media relies on the difficult task of integrating media technologies into fields such as engineering, marketing, health, learning,

  9. Engineering Optics

    CERN Document Server

    Iizuka, Keigo

    2008-01-01

    Engineering Optics is a book for students who want to apply their knowledge of optics to engineering problems, as well as for engineering students who want to acquire the basic principles of optics. It covers such important topics as optical signal processing, holography, tomography, holographic radars, fiber optical communication, electro- and acousto-optic devices, and integrated optics (including optical bistability). As a basis for understanding these topics, the first few chapters give easy-to-follow explanations of diffraction theory, Fourier transforms, and geometrical optics. Practical examples, such as the video disk, the Fresnel zone plate, and many more, appear throughout the text, together with numerous solved exercises. There is an entirely new section in this updated edition on 3-D imaging.

  10. Engineering physics

    CERN Document Server

    Mukherji, Uma

    2015-01-01

    ENGINEERING PHYSICS is designed as a textbook for first year engineering students of a two semester course in Applied Physics according to new revised syllabus. However the scope of this book is not only limited to undergraduate engineering students and science students, it can also serve as a reference book for practicing scientists.Advanced technological topics like LCD, Squid, Maglev system, Electron microscopes, MRI, Photonics - Photonic fibre, Nano-particles, CNT, Quantum computing etc., are explained with basic underlying principles of Physics.This text explained following topics with numerous solved, unsolved problems and questions from different angles. Part-I contains crystal structure, Liquid crystal, Thermo-electric effect, Thermionic emission, Ultrasonic, Acoustics, semiconductor and magnetic materials. Whereas Part-2 contains Optics, X-rays, Electron optics, Dielectric materials, Quantum Physics and Schrodinger wave equation, Laser, Fibre-optics and Holography, Radio-activity, Super-conductivity,...

  11. Engineering surveying

    CERN Document Server

    Schofield, W

    2007-01-01

    Engineering surveying involves determining the position of natural and man-made features on or beneath the Earth's surface and utilizing these features in the planning, design and construction of works. It is a critical part of any engineering project. Without an accurate understanding of the size, shape and nature of the site the project risks expensive and time-consuming errors or even catastrophic failure.Engineering Surveying 6th edition covers all the basic principles and practice of this complex subject and the authors bring expertise and clarity. Previous editions of this classic text have given readers a clear understanding of fundamentals such as vertical control, distance, angles and position right through to the most modern technologies, and this fully updated edition continues that tradition.This sixth edition includes:* An introduction to geodesy to facilitate greater understanding of satellite systems* A fully updated chapter on GPS, GLONASS and GALILEO for satellite positioning in surveying* Al...

  12. Futures of civil engineering

    DEFF Research Database (Denmark)

    specific climatic challenge or clean the air. With nanotechnology, the artificial and the natural move closer together; this is the perspective for civil engineer Chris McCarthy’s work all over the world. And what is new is not just the way the construction materials are put together; they also require...... consisting of free, public lectures by international experts, and workshops and master classes on this question open to everyone in the building industry. The use of glass as a construction material would have been considered impossible a few years ago. But work on achieving complete transparency was a major...... the story of transparency and dematerialisation is far from complete. New construction materials have also come from new knowledge at the nano-scale. Design at the molecular level opens the way for materials with completely new properties and options, e.g. active materials, designed to cope with some...

  13. Micro Engineering

    DEFF Research Database (Denmark)

    Alting, Leo; Kimura, F.; Hansen, Hans Nørgaard

    2003-01-01

    The paper addresses the questions of how micro products are designed and how they are manufactured. Definitions of micro products and micro engineering are discussed and the presentation is aimed at describing typical issues, possibilities and tools regarding design of micro products. The implica......The paper addresses the questions of how micro products are designed and how they are manufactured. Definitions of micro products and micro engineering are discussed and the presentation is aimed at describing typical issues, possibilities and tools regarding design of micro products...

  14. Biochemistry engineering

    International Nuclear Information System (INIS)

    Jang, Ho Nam

    1993-01-01

    This deals with biochemistry engineering with nine chapters. It explains bionics on development and prospect, basics of life science on classification and structure, enzyme and metabolism, fundamentals of chemical engineering on viscosity, shear rate, PFR, CSTR, mixing, dispersion, measurement and response, Enzyme kinetics, competitive inhibition, pH profile, temperature profile, stoichiometry and fermentation kinetics, bio-reactor on Enzyme-reactor and microorganism-reactor, measurement and processing on data acquisition and data processing, separation and purification, waste water treatment and economics of bionics process.

  15. Software engineering

    CERN Document Server

    Thorin, Marc

    1985-01-01

    Software Engineering describes the conceptual bases as well as the main methods and rules on computer programming. This book presents software engineering as a coherent and logically built synthesis and makes it possible to properly carry out an application of small or medium difficulty that can later be developed and adapted to more complex cases. This text is comprised of six chapters and begins by introducing the reader to the fundamental notions of entities, actions, and programming. The next two chapters elaborate on the concepts of information and consistency domains and show that a proc

  16. Engineering tribology

    CERN Document Server

    Stachowiak, Gwidon

    2014-01-01

    Engineering Tribology, 4th Edition is an established introductory reference focusing on the key concepts and engineering implications of tribology. Taking an interdisciplinary view, the book brings together the relevant knowledge from different fields needed to achieve effective analysis and control of friction and wear. Updated to cover recent advances in tribology, this new edition includes new sections on ionic and mesogenic lubricants, surface texturing, and multiscale characterization of 3D surfaces and coatings. Current trends in nanotribology are discussed, such as those relating to

  17. University/Science Center Collaborations (A Science Center Perspective): Developing an Infrastructure of Partnerships with Science Centers to Support the Engagement of Scientists and Engineers in Education and Outreach for Broad Impact

    Science.gov (United States)

    Marshall, Eric

    2009-03-01

    Science centers, professional associations, corporations and university research centers share the same mission of education and outreach, yet come from ``different worlds.'' This gap may be bridged by working together to leverage unique strengths in partnership. Front-end evaluation results for the development of new resources to support these (mostly volunteer-based) partnerships elucidate the factors which lead to a successful relationship. Maintaining a science museum-scientific community partnership requires that all partners devote adequate resources (time, money, etc.). In general, scientists/engineers and science museum professionals often approach relationships with different assumptions and expectations. The culture of science centers is distinctly different from the culture of science. Scientists/engineers prefer to select how they will ultimately share their expertise from an array of choices. Successful partnerships stem from clearly defined roles and responsibilities. Scientists/engineers are somewhat resistant to the idea of traditional, formal training. Instead of developing new expertise, many prefer to offer their existing strengths and expertise. Maintaining a healthy relationship requires the routine recognition of the contributions of scientists/engineers. As professional societies, university research centers and corporations increasingly engage in education and outreach, a need for a supportive infrastructure becomes evident. Work of TryScience.org/VolTS (Volunteers TryScience), the MRS NISE Net (Nanoscale Informal Science Education Network) subcommittee, NRCEN (NSF Research Center Education Network), the IBM On Demand Community, and IEEE Educational Activities exemplify some of the pieces of this evolving infrastructure.

  18. Control of Chaos: New Perspectives in Experimental and Theoretical Science. International Journal of Bifurcation and Chaos in Applied Sciences and Engineering. Theme Issue. Part 1. Volume 8, Number 8, August 1998.

    Science.gov (United States)

    1998-08-01

    life and medical sciences, physics, social sciences, zoology, etc.) and engineering (aerospace, chemical, civil , computer, information, mechanical...de Matemdticas, Universidad de Murcia, Murcia, Spain RICARDO CHACON Departamento de Electr6nica e, Ingenieria Electromecdnica, Escuela, de... Ingenierias Industriales, Universidad de Extremadura, 06071, Badajoz, Spain MIGUEL ANGEL LOPEZ Departamento de Matemdticas, Aplicada, Escuela Universitaria de

  19. Flow resistance a design guide for engineers

    CERN Document Server

    Idelchik, I

    1989-01-01

    A sourcebook offering an up-to-date perspective on a variety of topics and using practical, applications-oriented data necessary for the design and evaluation of internal fluid system pressure losses. It has been prepared for the practicing engineer who understands fluid-flow fundamentals.

  20. Bringing Knowledge Management into an Engineering Curriculum

    Science.gov (United States)

    Winberg, S. L.; Schach, S. R.; Inggs, M. R.

    2007-01-01

    The use of effective knowledge management is becoming an essential part of technical development projects in order to enable developers to handle the growing complexity of these projects. In this article we discuss an innovative approach to address this concern from the perspective of an undergraduate engineering curriculum. Instead of adding…

  1. Making room in engineering design practices

    DEFF Research Database (Denmark)

    Petersen, Rikke Premer; Buch, Anders

    2016-01-01

    This article aims to explore the challenges that occur from a practice perspective when a new approach to engineering design enters an existing ecology of professional practices in a workplace. Using four empirical episodes, the article illustrates a concrete effort to challenge what counts...... as ‘real engineering’ or what is recognized as part of the engineering expertise. Using an ethnographic, case-studybased research design the article documentshowholistically minded professionals do engineering design ‘by other means’, in ways that strive to promote user experience approaches. The article...

  2. Applied mathematics for science and engineering

    CERN Document Server

    Glasgow, Larry A

    2014-01-01

    Prepare students for success in using applied mathematics for engineering practice and post-graduate studies moves from one mathematical method to the next sustaining reader interest and easing the application of the techniques Uses different examples from chemical, civil, mechanical and various other engineering fields Based on a decade's worth of the authors lecture notes detailing the topic of applied mathematics for scientists and engineers Concisely writing with numerous examples provided including historical perspectives as well as a solutions manual for academic adopters

  3. Tänu Gary Schwartzile / Helena Risthein

    Index Scriptorium Estoniae

    Risthein, Helena, 1954-

    2011-01-01

    New Yorgis sündinud ja õppinud, Hollandis elavast kunstiteadlasest, hollandi kunsti spetsialistist Gary Schwartzist, tema töödest. 17. ja 18. augustil külastasid Gary ja Loekie Schwartz Eesti Kunstimuuseumi filiaale. Gary Schwartzi rajatud Madalmaade kunsti hoidjate ja uurijate rahvusvahelisest ühingust CODART, mille konverentsidest ja õppereisidest on ka eesti kunstiteadlased osa võtnud. Ühingu häälekandjast CODART Courant

  4. Religious architecture: anthropological perspectives

    NARCIS (Netherlands)

    Verkaaik, O.

    2013-01-01

    Religious Architecture: Anthropological Perspectives develops an anthropological perspective on modern religious architecture, including mosques, churches and synagogues. Borrowing from a range of theoretical perspectives on space-making and material religion, this volume looks at how religious

  5. Integration, Authenticity, and Relevancy in College Science through Engineering Design

    Science.gov (United States)

    Turner, Ken L., Jr.; Hoffman, Adam R.

    2018-01-01

    Engineering design is an ideal perspective for engaging students in college science classes. An engineering design problem-solving framework was used to create a general chemistry lab activity focused on an important environmental issue--dead zones. Dead zones impact over 400 locations around the world and are a result of nutrient pollution, one…

  6. Protein engineering techniques gateways to synthetic protein universe

    CERN Document Server

    Poluri, Krishna Mohan

    2017-01-01

    This brief provides a broad overview of protein-engineering research, offering a glimpse of the most common experimental methods. It also presents various computational programs with applications that are widely used in directed evolution, computational and de novo protein design. Further, it sheds light on the advantages and pitfalls of existing methodologies and future perspectives of protein engineering techniques.

  7. Women Engineering Transfer Students: The Community College Experience

    Science.gov (United States)

    Patterson, Susan J.

    2011-01-01

    An interpretative philosophical framework was applied to a case study to document the particular experiences and perspectives of ten women engineering transfer students who once attended a community college and are currently enrolled in one of two university professional engineering programs. This study is important because women still do not earn…

  8. Aging Perspectives

    Directory of Open Access Journals (Sweden)

    Theodore D Cosco

    2014-05-01

    Full Text Available Despite the proliferation of successful ageing (SA research, the literature is dominated by researcher-driven Anglophone conceptualisations. To date, lay perspectives of SA have not been examined in Europe or Turkey. The current study aims to conduct a mixed-methods examination of conceptualisations of SA in seven underrepresented countries. Using snowball sampling via social media sites, an online survey consisting of established closed-ended and open-ended items – translated into seven languages – was administered. Grounded theory methods and descriptive statistics were used to analyse qualitative and quantitative data, respectively.

  9. Perspectives on bioeconomy.

    Science.gov (United States)

    Aguilar, Alfredo; Wohlgemuth, Roland; Twardowski, Tomasz

    2018-01-25

    The insight provided by the authors of this special issue on bioeconomy give a reassuring sign of optimism, vitality and strong will to make bioeconomy a success story. Key to these advances will be inventing and shaping our future and the cooperation of people who will create new scientific and technological discoveries, developments and their implementation into industrial practice. The vibrant global megatrend bioeconomy is developing along various dimensions depending on natural and social conditions, economic development and political objectives. As value chains from producer countries and regions to their corresponding customers are interconnected globally and bioeconomies are diverse, constructive dialogues and agreed social consensus are therefore relevant worldwide. Mapping and engineering the uncharted territories of the molecular transformations, which are key to the bioeconomy, represents a great opportunity for the molecular and engineering sciences to bring in their important contributions. The development of smart bioeconomies needs excellence in science-based concepts, long-term support of innovative and mission-oriented research and a subtle equilibrium between science push and market and social pull. On the policy front, coherent and science-based policy decisions embracing bioeconomy and being consistent with each other are needed. From a global perspective, bioeconomy topics should be included in the international and national agendas on sustainable development goals. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Combustion engineering

    CERN Document Server

    Ragland, Kenneth W

    2011-01-01

    Introduction to Combustion Engineering The Nature of Combustion Combustion Emissions Global Climate Change Sustainability World Energy Production Structure of the Book   Section I: Basic Concepts Fuels Gaseous Fuels Liquid Fuels Solid Fuels Problems Thermodynamics of Combustion Review of First Law Concepts Properties of Mixtures Combustion StoichiometryChemical EnergyChemical EquilibriumAdiabatic Flame TemperatureChemical Kinetics of CombustionElementary ReactionsChain ReactionsGlobal ReactionsNitric Oxide KineticsReactions at a Solid SurfaceProblemsReferences  Section II: Combustion of Gaseous and Vaporized FuelsFlamesLaminar Premixed FlamesLaminar Flame TheoryTurbulent Premixed FlamesExplosion LimitsDiffusion FlamesGas-Fired Furnaces and BoilersEnergy Balance and EfficiencyFuel SubstitutionResidential Gas BurnersIndustrial Gas BurnersUtility Gas BurnersLow Swirl Gas BurnersPremixed-Charge Engine CombustionIntroduction to the Spark Ignition EngineEngine EfficiencyOne-Zone Model of Combustion in a Piston-...

  11. Metabolic Engineering

    Indian Academy of Sciences (India)

    IAS Admin

    and in vitro to be able to alter properties of the encoded enzyme, and (6) assemble an array of genes for their expression inside the host cell. Although bacteria and yeast are the pioneering hosts for metabolic engineering, other organisms such as fungi, animal as well as plant cells are also used nowadays for similar experi ...

  12. Metabolic Engineering

    Indian Academy of Sciences (India)

    IAS Admin

    Metabolic engineering is a process for modulating the me- tabolism of the organisms so as to produce the required amounts of the desired metabolite through genetic manipula- tions. Considering its advantages over the other chemical synthesis routes, this area of biotechnology is likely to revolu- tionize the way in which ...

  13. Sound engineer

    CERN Document Server

    Mara, Wil

    2015-01-01

    "Readers will learn what it takes to succeed as a sound engineer. The book also explains the necessary educational steps, useful character traits, potential hazards, and daily job tasks related to this career. Sidebars include thought-provoking trivia. Questions in the backmatter ask for text-dependent analysis. Photos, a glossary, and additional resources are included."-- Provided by publisher.

  14. Biocommodity Engineering.

    Science.gov (United States)

    Lynd; Wyman; Gerngross

    1999-10-01

    The application of biotechnology to the production of commodity products (fuels, chemicals, and materials) offering benefits in terms of sustainable resource supply and environmental quality is an emergent area of intellectual endeavor and industrial practice with great promise. Such "biocommodity engineering" is distinct from biotechnology motivated by health care at multiple levels, including economic driving forces, the importance of feedstocks and cost-motivated process engineering, and the scale of application. Plant biomass represents both the dominant foreseeable source of feedstocks for biotechnological processes as well as the only foreseeable sustainable source of organic fuels, chemicals, and materials. A variety of forms of biomass, notably many cellulosic feedstocks, are potentially available at a large scale and are cost-competitive with low-cost petroleum whether considered on a mass or energy basis, and in terms of price defined on a purchase or net basis for both current and projected mature technology, and on a transfer basis for mature technology. Thus the central, and we believe surmountable, impediment to more widespread application of biocommodity engineering is the general absence of low-cost processing technology. Technological and research challenges associated with converting plant biomass into commodity products are considered relative to overcoming the recalcitrance of cellulosic biomass (converting cellulosic biomass into reactive intermediates) and product diversification (converting reactive intermediates into useful products). Advances are needed in pretreatment technology to make cellulosic materials accessible to enzymatic hydrolysis, with increased attention to the fundamental chemistry operative in pretreatment processes likely to accelerate progress. Important biotechnological challenges related to the utilization of cellulosic biomass include developing cellulase enzymes and microorganisms to produce them, fermentation of

  15. Engineers' Responsibilities for Global Electronic Waste: Exploring Engineering Student Writing Through a Care Ethics Lens.

    Science.gov (United States)

    Campbell, Ryan C; Wilson, Denise

    2017-04-01

    This paper provides an empirically informed perspective on the notion of responsibility using an ethical framework that has received little attention in the engineering-related literature to date: ethics of care. In this work, we ground conceptual explorations of engineering responsibility in empirical findings from engineering student's writing on the human health and environmental impacts of "backyard" electronic waste recycling/disposal. Our findings, from a purposefully diverse sample of engineering students in an introductory electrical engineering course, indicate that most of these engineers of tomorrow associated engineers with responsibility for the electronic waste (e-waste) problem in some way. However, a number of responses suggested attempts to deflect responsibility away from engineers towards, for example, the government or the companies for whom engineers work. Still other students associated both engineers and non-engineers with responsibility, demonstrating the distributed/collective nature of responsibility that will be required to achieve a solution to the global problem of excessive e-waste. Building upon one element of a framework for care ethics adopted from the wider literature, these empirical findings are used to facilitate a preliminary, conceptual exploration of care-ethical responsibility within the context of engineering and e-waste recycling/disposal. The objective of this exploration is to provide a first step toward understanding how care-ethical responsibility applies to engineering. We also hope to seed dialogue within the engineering community about its ethical responsibilities on the issue. We conclude the paper with a discussion of its implications for engineering education and engineering ethics that suggests changes for educational policy and the practice of engineering.

  16. Empathy among students in engineering programmes

    Science.gov (United States)

    Rasoal, Chato; Danielsson, Henrik; Jungert, Tomas

    2012-10-01

    Engineers face challenges when they are to manage project groups and be leaders for organisations because such positions demand skills in social competence and empathy. Previous studies have shown that engineers have low degrees of social competence skills. In this study, the level of empathy as measured by the four subscales of the Interpersonal Reactivity Index, perspective taking, fantasy, empathic distress and empathic concern, among engineering students was compared to students in health care profession programmes. Participants were undergraduate students at Linköping University, 365 students from four different health care profession programmes and 115 students from two different engineering programmes. When the empathy measures were corrected for effects of sex, engineering students from one of the programmes had lower empathy than psychology and social worker students on the fantasy and perspective-taking subscales. These results raise questions regarding opportunities for engineering students to develop their empathic abilities. It is important that engineering students acquire both theoretical and practical knowledge and skills regarding empathy.

  17. What are the Characteristics of Engineering Design Processes?

    DEFF Research Database (Denmark)

    Maier, Anja; Störrle, Harald

    2011-01-01

    survey among academic and industrial ED process modelling experts. In a third step, we added a further nine characteristics from personal experiences in the Language Engineering Domain to capture the pragmatic perspective. We arrive at a comprehensive set of 18 characteristics grouped into 6 challenges......This paper studies the characteristic properties of Engineering Design (ED) processes from a process modelling perspective. In a first step, we extracted nine characteristics of engineering design processes from the literature and in a second step validated the findings using results from our...

  18. Industrial design as an innovative element in engineering education

    DEFF Research Database (Denmark)

    Schjær-Jacobsen, Hans; Abou-Hayt, Imad; Ashworth, David

    2012-01-01

    with creative design as a driver of innovation. With a practical and problem based learning approach at IHK the students are asked to work closely together with companies to come up with engineering solutions that are sustainable from both an engineering and a design perspective.......This paper describes how the Copenhagen University College of Engineering (IHK), in our continuing effort to innovate the engineering study programs, have introduced strong industrial design elements in the 210 ECTS Bachelor of Mechanical Engineering program as well as the 30 ECTS International...

  19. What are the Characteristics of Engineering Design Processes?

    DEFF Research Database (Denmark)

    Maier, Anja; Störrle, Harald

    2011-01-01

    for process modelling in the engineering design domain. The challenges process modelers need to address when using and developing process modelling approaches and tools are: Development, Collaboration, Products & Services, Formality, Pragmatics, and Flexibility. We then compare the importance of elicited......This paper studies the characteristic properties of Engineering Design (ED) processes from a process modelling perspective. In a first step, we extracted nine characteristics of engineering design processes from the literature and in a second step validated the findings using results from our...... and suggested challenges and characteristics within engineering design with software engineering and business process modelling and discuss similarities and differences....

  20. 3D Printing and Biofabrication for Load Bearing Tissue Engineering.

    Science.gov (United States)

    Jeong, Claire G; Atala, Anthony

    2015-01-01

    Cell-based direct biofabrication and 3D bioprinting is becoming a dominant technological platform and is suggested as a new paradigm for twenty-first century tissue engineering. These techniques may be our next step in surpassing the hurdles and limitations of conventional scaffold-based tissue engineering, and may offer the industrial potential of tissue engineered products especially for load bearing tissues. Here we present a topically focused review regarding the fundamental concepts, state of the art, and perspectives of this new technology and field of biofabrication and 3D bioprinting, specifically focused on tissue engineering of load bearing tissues such as bone, cartilage, osteochondral and dental tissue engineering.

  1. Engineering Review Information System

    Science.gov (United States)

    Grems, III, Edward G. (Inventor); Henze, James E. (Inventor); Bixby, Jonathan A. (Inventor); Roberts, Mark (Inventor); Mann, Thomas (Inventor)

    2015-01-01

    A disciplinal engineering review computer information system and method by defining a database of disciplinal engineering review process entities for an enterprise engineering program, opening a computer supported engineering item based upon the defined disciplinal engineering review process entities, managing a review of the opened engineering item according to the defined disciplinal engineering review process entities, and closing the opened engineering item according to the opened engineering item review.

  2. Optimization in engineering models and algorithms

    CERN Document Server

    Sioshansi, Ramteen

    2017-01-01

    This textbook covers the fundamentals of optimization, including linear, mixed-integer linear, nonlinear, and dynamic optimization techniques, with a clear engineering focus. It carefully describes classical optimization models and algorithms using an engineering problem-solving perspective, and emphasizes modeling issues using many real-world examples related to a variety of application areas. Providing an appropriate blend of practical applications and optimization theory makes the text useful to both practitioners and students, and gives the reader a good sense of the power of optimization and the potential difficulties in applying optimization to modeling real-world systems. The book is intended for undergraduate and graduate-level teaching in industrial engineering and other engineering specialties. It is also of use to industry practitioners, due to the inclusion of real-world applications, opening the door to advanced courses on both modeling and algorithm development within the industrial engineering ...

  3. Integrating ergonomic knowledge into engineering design processes

    DEFF Research Database (Denmark)

    Hall-Andersen, Lene Bjerg

    to the ergonomic ambitions of the clients. The ergonomists’ ability to navigate, act strategically, and compromise on ergonomic inputs is also important in relation to having an impact in the engineering design processes. Familiarity with the engineering design terminology and the setup of design projects seems...... on learning and knowledge management and theoretical concepts of objects derived from Science and Technology Studies. This combination of theoretical perspectives is new with this area. In the engineering consultancy setting the proximity, which arose from the ergonomists and engineering designers being...... employed in the same company, constituted a supporting factor for the possibilities to integrate ergonomic knowledge into the engineering design processes. However, the integration activities remained discrete and only happened in some of the design projects. A major barrier was related to the business...

  4. Is Chinese software engineering professionalizing or not?

    DEFF Research Database (Denmark)

    Yang, Yan

    2012-01-01

    This paper aims to discuss the challenge for the classical idea of professionalism in understanding the Chinese software engineering industry after giving a close insight into the development of this industry as well as individual engineers with a psycho-societal perspective. Design....../methodology/approach: The study starts with the general review of the sociological concept of profession, professional and specialization of knowledge. Together with revealing the critical challenge from the empirical field of software engineering industry regarding its professionalization, a critique of the neglect...... reveals the dynamics in this development process relating to individual, social practice and societal factors. Originality/value: This paper contributes to empirical research of analyzing the professionalization process of software engineering and software engineers in relation to the concept...

  5. Advancing metabolic engineering through systems biology of industrial microorganisms

    DEFF Research Database (Denmark)

    Dai, Zongjie; Nielsen, Jens

    2015-01-01

    resources. The objective of systems biology is to gain a comprehensive and quantitative understanding of living cells and can hereby enhance our ability to characterize and predict cellular behavior. Systems biology of industrial microorganisms is therefore valuable for metabolic engineering. Here we review...... the application of systems biology tools for the identification of metabolic engineering targets which may lead to reduced development time for efficient cell factories. Finally, we present some perspectives of systems biology for advancing metabolic engineering further....

  6. Engine Handling.

    Science.gov (United States)

    1983-02-01

    air seal for long life turbine engine. AIAA - 81 - 1440 4.- STEWART P.A.E., BRASNETT K.A., The contribution of dynamic x - ray to gas turbine air...trio exigeant A ce nivoau. Los calculo 4’int~gration du syotime adjoint sont trio p~nalisanto en tempo de calcul. LuA vatu g.aeh d & apt~If adjoint

  7. Robot engineering

    International Nuclear Information System (INIS)

    Jung, Seul

    2006-02-01

    This book deals with robot engineering, giving descriptions of robot's history, current tendency of robot field, work and characteristic of industrial robot, essential merit and vector, application of matrix, analysis of basic vector, expression of Denavit-Hartenberg, robot kinematics such as forward kinematics, inverse kinematics, cases of MATLAB program, and motion kinematics, robot kinetics like moment of inertia, centrifugal force and coriolis power, and Euler-Lagrangian equation course plan, SIMULINK position control of robots.

  8. Planetary engineering

    Science.gov (United States)

    Pollack, James B.; Sagan, Carl

    1991-01-01

    Assuming commercial fusion power, heavy lift vehicles and major advances in genetic engineering, the authors survey possible late-21st century methods of working major transformations in planetary environments. Much more Earthlike climates may be produced on Mars by generating low freezing point greenhouse gases from indigenous materials; on Venus by biological conversion of CO2 to graphite, by canceling the greenhouse effect with high-altitude absorbing fine particles, or by a sunshield at the first Lagrangian point; and on Titan by greenhouses and/or fusion warming. However, in our present state of ignorance we cannot guarantee a stable endstate or exclude unanticipated climatic feedbacks or other unintended consequences. Moreover, as the authors illustrate by several examples, many conceivable modes of planetary engineering are so wasteful of scarce solar system resources and so destructive of important scientific information as to raise profound ethical issues, even if they were economically feasible, which they are not. Global warming on Earth may lead to calls for mitigation by planetary engineering, e.g., emplacement and replenishment of anti-greenhouse layers at high altitudes, or sunshields in space. But here especially we must be concerned about precision, stability, and inadvertent side-effects. The safest and most cost-effective means of countering global warming - beyond, e.g., improved energy efficiency, CFC bans and alternative energy sources - is the continuing reforestation of approximately 2 times 107 sq km of the Earth's surface. This can be accomplished with present technology and probably at the least cost.

  9. Web Engineering

    Energy Technology Data Exchange (ETDEWEB)

    White, Bebo

    2003-06-23

    Web Engineering is the application of systematic, disciplined and quantifiable approaches to development, operation, and maintenance of Web-based applications. It is both a pro-active approach and a growing collection of theoretical and empirical research in Web application development. This paper gives an overview of Web Engineering by addressing the questions: (a) why is it needed? (b) what is its domain of operation? (c) how does it help and what should it do to improve Web application development? and (d) how should it be incorporated in education and training? The paper discusses the significant differences that exist between Web applications and conventional software, the taxonomy of Web applications, the progress made so far and the research issues and experience of creating a specialization at the master's level. The paper reaches a conclusion that Web Engineering at this stage is a moving target since Web technologies are constantly evolving, making new types of applications possible, which in turn may require innovations in how they are built, deployed and maintained.

  10. Planetary engineering

    Science.gov (United States)

    Pollack, James B.; Sagan, Carl

    Assuming commercial fusion power, heavy lift vehicles and major advances in genetic engineering, the authors survey possible late-21st century methods of working major transformations in planetary environments. Much more Earthlike climates may be produced on Mars by generating low freezing point greenhouse gases from indigenous materials; on Venus by biological conversion of CO2 to graphite, by canceling the greenhouse effect with high-altitude absorbing fine particles, or by a sunshield at the first Lagrangian point; and on Titan by greenhouses and/or fusion warming. However, in our present state of ignorance we cannot guarantee a stable endstate or exclude unanticipated climatic feedbacks or other unintended consequences. Moreover, as the authors illustrate by several examples, many conceivable modes of planetary engineering are so wasteful of scarce solar system resources and so destructive of important scientific information as to raise profound ethical issues, even if they were economically feasible, which they are not. Global warming on Earth may lead to calls for mitigation by planetary engineering, e.g., emplacement and replenishment of anti-greenhouse layers at high altitudes, or sunshields in space. But here especially we must be concerned about precision, stability, and inadvertent side-effects. The safest and most cost-effective means of countering global warming - beyond, e.g., improved energy efficiency, CFC bans and alternative energy sources - is the continuing reforestation of approximately 2 times 107 sq km of the Earth's surface. This can be accomplished with present technology and probably at the least cost.

  11. Future perspectives

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    International involvement in particle physics is what the International Committee for Future Accelerators (ICFA) is all about. At the latest Future Perspectives meeting at Brookhaven from 5-10 October (after a keynote speech by doyen Viktor Weisskopf, who regretted the emergence of 'a nationalistic trend'), ICFA reviewed progress and examined its commitments in the light of the evolving world particle physics scene. Particular aims were to review worldwide accelerator achievements and plans, to survey the work of the four panels, and to discuss ICFA's special role in future cooperation in accelerator construction and use, and in research and development work for both accelerators and for detectors

  12. Cosmic Perspectives

    Science.gov (United States)

    Biswas, S. K.; Mallik, D. C. V.; Vishveshwara, C. V.

    2008-07-01

    1. Astronomy in ancient and medieval China Joseph Needham; 2. Indian astronomy: an historical perspective B. V. Subbarayappa; 3. Making of astronomy in ancient India Debiprasad Chattopadhyaya; 4. The impact of astronomy on the development of western science Jean-Claude Pecker; 5. Man and the Universe Hubert Reeves; 6. Understanding the Universe - challenges and directions in modern observational astronomy Harlan Smith, Jr: 7. Frontiers in cosmology Fred Hoyle; 8. Did the Universe originate in a big bang? Jayant Narlikar; 9. The dark matter problem Bernard Carr; 10. Geometry and the Universe C. V. Vishveshwara; 11. The origin and evolution of life Cyril Ponnamperuma; 12. The anthropic principle: self selection as an adjunct to natural selection Brandon Carter; 13. Astrology and science: an examination of the evidence Ivan Kelly, Roger Culver and Peter Loptson; 14. Astronomy and science fiction Allen Janis.

  13. Inverse perspective

    Science.gov (United States)

    Dolinsky, Margaret

    2006-02-01

    This paper will discuss the potentiality towards a methodology for creating perceptual shifts in virtual reality (VR) environments. A perceptual shift is a cognitive recognition of having experienced something extra-marginal, on the boundaries of normal awareness, outside of conditioned attenuation. Definitions of perceptual shifts demonstrate a historical tradition for the wonder of devices as well as analyze various categories of sensory and optical illusions. Neuroscience and cognitive science attempt to explain perceptual shifts through biological and perceptual mechanisms using the sciences. This paper explores perspective, illusion and projections to situate an artistic process in terms of perceptual shifts. Most VR environments rely on a single perceptual shift while there remains enormous potential for perceptual shifts in VR. Examples of artwork and VR environments develop and present this idea.

  14. Complex networks an algorithmic perspective

    CERN Document Server

    Erciyes, Kayhan

    2014-01-01

    Network science is a rapidly emerging field of study that encompasses mathematics, computer science, physics, and engineering. A key issue in the study of complex networks is to understand the collective behavior of the various elements of these networks.Although the results from graph theory have proven to be powerful in investigating the structures of complex networks, few books focus on the algorithmic aspects of complex network analysis. Filling this need, Complex Networks: An Algorithmic Perspective supplies the basic theoretical algorithmic and graph theoretic knowledge needed by every r

  15. Nanoelectronics: The perspective in microelectronics

    International Nuclear Information System (INIS)

    Mutihac, R.; Mutihac, R.C.; Cicuttin, A.; Colavita, A.A.

    2001-10-01

    The present survey briefly presents the-state-of-the-art in microelectronics, invokes physical considerations in estimating the intrinsic limits of present microelectronic devices, and highlights the future trends in the perspectives of the incoming nanoscale technologies. In order to design artificial systems with molecular precision, molecular brand new engineering methods must be developed, that is, to hold, position, and assemble nanoscale parts in compliance with the laws of physics. In the framework of the nanoscale technologies, the thermodynamically reversible single electron switching systems are considered as ultimate evolutionary end point of electronic logic devices built up at molecular level. (author)

  16. Lean engineering education driving content and competency mastery

    CERN Document Server

    Flumerfelt, Shannon

    2015-01-01

    Recent studies by professional organizations devoted to engineering education, such as Vision 2030 (ASME) and Vision 2025 (ASCE), highlight the need for the restructuring of engineering education. Deficiencies of many engineering graduates include poor systems thinking and systems analysis skills, lack of sensitivity for sustainability issues, poorly developed problem solving skills and lack of training to work in (multi- disciplinary) teams, as well as a lack of leadership, entrepreneurship, innovation, and project management skills. The book's contents include an analysis of current shortfalls in engineering education and education related to professional practice in engineering. Further, the authors describe desirable improvements as well as advocacy for the use of lean tenets and tools to create a new future for engineering education. This book presents, for the first time, an outside-in lean engineering perspective of how this commonly accepted and widely practiced and adapted engineering perspecti...

  17. Robustness and Reliability of the GM Ignition Switch - A forensic Engineering case

    DEFF Research Database (Denmark)

    Eifler, Tobias; Lerche Olesen, Jonas; Howard, Thomas J.

    2014-01-01

    This paper uses forensic engineering from the perspectives of Robust Design and Reliability Engineering to review one of the most infamous recalls in automotive history, that of the GM ignition switch. The design, engineering and management failures in this case ultimately resulted in a fine of $...

  18. Engineering justice transforming engineering education and practice

    CERN Document Server

    Leydens, Jon A

    2018-01-01

    Using social justice as a catalyst for curricular transformation, Engineering Justice presents an examination of how politics, culture, and other social issues are inherent in the practice of engineering. It aims to align engineering curricula with socially just outcomes, increase enrollment among underrepresented groups, and lessen lingering gender, class, and ethnicity gaps by showing how the power of engineering knowledge can be explicitly harnessed to serve the underserved and address social inequalities. This book is meant to transform the way educators think about engineering curricula through creating or transforming existing courses to attract, retain, and motivate engineering students to become professionals who enact engineering for social justice. Engineering Justice offers thought-provoking chapters on: why social justice is inherent yet often invisible in engineering education and practice; engineering design for social justice; social justice in the engineering sciences; social justice in human...

  19. NASA/DoD Aerospace Knowledge Diffusion Research Project: Report 43: The Technical Communication Practices of U.S. Aerospace Engineers and Scientists: Results of the Phase 1 Mail Survey -- Manufacturing and Production Perspective

    Science.gov (United States)

    Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

    1996-01-01

    The U.S. government technical report is a primary means by which the results of federally funded research and development (R&D) are transferred to the U.S. aerospace industry. However, little is known about this information product in terms of its actual use, importance, and value in the transfer of federally funded R&D. To help establish a body of knowledge, the U.S. government technical report is being investigated as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. In this report, we summarize the literature on technical reports and provide a model that depicts the transfer of federally funded aerospace R&D via the U.S. government technical report. We present results from our investigation of aerospace knowledge diffusion vis-a-vis the U.S. government technical report, and present the results of research that investigated aerospace knowledge diffusion vis-a-vis the technical communication practices of U.S. aerospace engineers and scientists who were members of the Society of Manufacturing Engineers.

  20. Microprocessor engineering

    CERN Document Server

    Holdsworth, B

    2013-01-01

    Microprocessor Engineering provides an insight in the structures and operating techniques of a small computer. The book is comprised of 10 chapters that deal with the various aspects of computing. The first two chapters tackle the basic arithmetic and logic processes. The third chapter covers the various memory devices, both ROM and RWM. Next, the book deals with the general architecture of microprocessor. The succeeding three chapters discuss the software aspects of machine operation, while the last remaining three chapters talk about the relationship of the microprocessor with the outside wo

  1. Internet Search Engines

    OpenAIRE

    Fatmaa El Zahraa Mohamed Abdou

    2004-01-01

    A general study about the internet search engines, the study deals main 7 points; the differance between search engines and search directories, components of search engines, the percentage of sites covered by search engines, cataloging of sites, the needed time for sites appearance in search engines, search capabilities, and types of search engines.

  2. Actualidad y perspectivas en la enseñanza del área de manufactura a estudiantes de ingeniería//Current and future perspectives in teaching manufacturing area to engineering students

    Directory of Open Access Journals (Sweden)

    Juan David Orjuela-Méndez

    2012-12-01

    Full Text Available Este trabajo es una revisión sobre los desafíos que se presentan en la formación de ingenieros para desempeñarse en manufactura y las propuestas de tipo curricular y didáctico para enfrentar los desafíos detectados. Se decanta que la industria de manufactura contemporánea está sometida a una dinámica detransformación paulatinamente más rápida para satisfacer las demandas locales y globales. Varios investigadores plantean que esta dinámica se debe reflejar también en la educación en ingeniería e indican la necesidad inaplazable de integrar el conocimiento práctico en el currículo. Se evidencia tambiénuna rápida expansión e influencia de las tecnologías de la información y comunicaciones en los procesos educativos y son puestos en consideración los nuevos estilos de aprendizaje de los jóvenes y su influencia en las prácticas utilizadas en el aula. Finalmente, se reportan varios enfoques estructuradospara evaluar, ajustar y rediseñar las acciones de formación, entre otras, el aprendizaje por proyectos.Palabras claves: ingeniería, procesos de manufactura, enseñanza, aprendizaje, enfoques estructurados.______________________________________________________________________________AbstractThis paper is a review of the challenges presented in the training of engineers to work in the manufacturing industry and the proposals of curricular and didactic kind to address the challenges identified. It is remarkable that the modern manufacturing industry is under a dynamic transformation gradually faster tomeet the local and global demands. Several researchers have suggested that this dynamic should be reflected also in engineering education and indicate the urgent need to integrate practical knowledge into the curriculum. Also is found a rapid expansion and influence of information and communication technologies in education and are put into consideration the new learning styles of young people and their influence on classroom

  3. Ethics and the UN Sustainable Development Goals: The Case for Comprehensive Engineering : Commentary on "Using Student Engagement to Relocate Ethics to the Core of the Engineering Curriculum".

    Science.gov (United States)

    van den Hoven, Jeroen

    2016-12-27

    In the twenty-first century, the urgent problems the world is facing (the UN Sustainable Development Goals) are increasingly related to vast and intricate 'systems of systems', which comprise both socio-technical and eco-systems. In order for engineers to adequately and responsibly respond to these problems, they cannot focus on only one technical or any other aspect in isolation, but must adopt a wider and multidisciplinary perspective of these systems, including an ethical and social perspective. Engineering curricula should therefore focus on what we call 'comprehensive engineering'. Comprehensive engineering implies ethical coherence, consilience of scientific disciplines, and cooperation between parties.

  4. An engineering context for software engineering

    OpenAIRE

    Riehle, Richard D.

    2008-01-01

    New engineering disciplines are emerging in the late Twentieth and early Twenty-first Century. One such emerging discipline is software engineering. The engineering community at large has long harbored a sense of skepticism about the validity of the term software engineering. During most of the fifty-plus years of software practice, that skepticism was probably justified. Professional education of software developers often fell short of the standard expected for conventional engineers; so...

  5. A Bibliometric Analysis of Climate Engineering Research

    Science.gov (United States)

    Belter, C. W.; Seidel, D. J.

    2013-12-01

    The past five years have seen a dramatic increase in the number of media and scientific publications on the topic of climate engineering, or geoengineering, and some scientists are increasingly calling for more research on climate engineering as a possible supplement to climate change mitigation and adaptation strategies. In this context, understanding the current state of climate engineering research can help inform policy discussions and guide future research directions. Bibliometric analysis - the quantitative analysis of publications - is particularly applicable to fields with large bodies of literature that are difficult to summarize by traditional review methods. The multidisciplinary nature of the published literature on climate engineering makes it an ideal candidate for bibliometric analysis. Publications on climate engineering are found to be relatively recent (more than half of all articles during 1988-2011 were published since 2008), include a higher than average percentage of non-research articles (30% compared with 8-15% in related scientific disciplines), and be predominately produced by countries located in the Northern Hemisphere and speaking English. The majority of this literature focuses on land-based methods of carbon sequestration, ocean iron fertilization, and solar radiation management and is produced with little collaboration among research groups. This study provides a summary of existing publications on climate engineering, a perspective on the scientific underpinnings of the global dialogue on climate engineering, and a baseline for quantitatively monitoring the development of climate engineering research in the future.

  6. Engineering electromagnetics

    CERN Document Server

    Thomas, David T; Hartnett, James P; Hughes, William F

    1973-01-01

    The applications involving electromagnetic fields are so pervasive that it is difficult to estimate their contribution to the industrial output: generation of electricity, power transmission lines, electric motors, actuators, relays, radio, TV and microwave transmission and reception, magnetic storage, and even the mundane little magnet used to hold a paper note on the refrigerator are all electromagnetic in nature. One would be hard pressed to find a device that works without relaying on any electromagnetic principle or effect. This text provides a good theoretical understanding of the electromagnetic field equations but also treats a large number of applications. In fact, no topic is presented unless it is directly applicable to engineering design or unless it is needed for the understanding of another topic. In electrostatics, for example, the text includes discussions of photocopying, ink-jet printing, electrostatic separation and deposition, sandpaper production, paint spraying, and powder coating. In ma...

  7. Engineering viscoelasticity

    CERN Document Server

    Gutierrez-Lemini, Danton

    2014-01-01

    Engineering Viscoelasticity covers all aspects of the thermo- mechanical response of viscoelastic substances that a practitioner in the field of viscoelasticity would need to design experiments, interpret test data, develop stress-strain models, perform stress analyses, design structural components, and carry out research work. The material in each chapter is developed from the elementary to the advanced, providing the background in mathematics and mechanics that are central to understanding the subject matter being presented. The book examines how viscoelastic materials respond to the application of loads, and provides practical guidelines to use them in the design of commercial, military and industrial applications. This book also: ·         Facilitates conceptual understanding by progressing in each chapter from elementary to challenging material ·         Examines in detail both differential and integral constitutive equations, devoting full chapters to each type and using both forms in ...

  8. Mechanical engineering

    International Nuclear Information System (INIS)

    1988-01-01

    The Mechanical Engineering Division provides the other NAC divisions with design and construction services. Items of special mechanical significance are discussed here. The projects which received major design attention during the past year were: a coupling capacitor for SPC2; a bending magnet and solenoid for ECR ion source; a scanner for outer orbits of the SSC; a scattering chamber for an experimental beamline; a beam swinger; a rotary target magazine for isotope production; a robot arm for isotope production; an isotope transport system and a target cooling system for isotope production. The major projects that were under construction are: a magnetic spectrometer; a second injector cyclotron (SPC2) and extensions to the high-energy beamlines. 4 figs

  9. Regenerative engineering

    CERN Document Server

    Laurencin, Cato T

    2013-01-01

    Regenerative Engineering: The Future of Medicine Saadiq F. El-Amin III , MD , PhD; Joylene W.L. Thomas, MD ; Ugonna N. Ihekweazu, MD ; Mia D. Woods, MS; and Ashim Gupta, MSCell Biology Gloria Gronowicz, PhD and Karen Sagomonyants, DMDStem Cells and Tissue Regeneration Kristen Martins-Taylor, PhD; Xiaofang Wang, MD , PhD; Xue-Jun Li, PhD; and Ren-He Xu, MD , PhDIntroduction to Materials Science Sangamesh G. Kumbar, PhD and Cato T. Laurencin, MD , PhDBiomaterials A. Jon Goldberg, PhD and Liisa T. Kuhn, PhDIn Vitro Assessment of Cell-Biomaterial Interactions Yong Wang, PhDHost Response to Biomate

  10. Historical perspective

    International Nuclear Information System (INIS)

    Schulz, Helmut

    1998-01-01

    The intention of this historical perspective is to try to find some answers to the question: 'Why do we still discuss the questions of thermal fatigue caused by mixing and stratification?'. In this context the following issues are addressed: general philosophy in the design of pressurized components, structures and internals; experience feedback; bridging disciplines with references to three events and their lessons learned: 1. a small leakage detected in the area of the control rod penetration of a boiling water reactor which was the first pilot plant built in Germany - the leakage increased over the next two days and the reactor was shut down to cold de-pressurized condition; 2. during the system pressure test as part of the start-up procedure after refueling a leakage occurred at a nozzle of the pressurizer of a VVER 440/230 unit at Greifswald in 1984 and a crack had developed all around the circumference and penetrated to the outer surface at a length of about 40 mm; 3. during the commissioning phase of a large German PWR a very extensive campaign was performed (in 1981) to measure the temperature profile in local flow areas where stratification and fluctuations may be expected by the change of system conditions. Before this a number of incidents at different pressurized and boiling water reactors had already indicated that the magnitude of temperature differences as well as frequency have been underestimated in the design process. The measurements performed proved to be very useful in understanding the local flow conditions in relation to the operating procedures applied during start up and cool down conditions

  11. Expanded Guidance for NASA Systems Engineering. Volume 1: Systems Engineering Practices

    Science.gov (United States)

    Hirshorn, Steven R.

    2016-01-01

    This document is intended to provide general guidance and information on systems engineering that will be useful to the NASA community. It provides a generic description of Systems Engineering (SE) as it should be applied throughout NASA. A goal of the expanded guidance is to increase awareness and consistency across the Agency and advance the practice of SE. This guidance provides perspectives relevant to NASA and data particular to NASA. This expanded guidance should be used as a companion for implementing NPR 7123.1, Systems Engineering Processes and Requirements, the Rev 2 version of SP-6105, and the Center-specific handbooks and directives developed for implementing systems engineering at NASA. It provides a companion reference book for the various systems engineering-related training being offered under NASA's auspices.

  12. Genetic engineering and sustainable production of ornamentals

    DEFF Research Database (Denmark)

    Lütken, Henrik Vlk; Clarke, Jihong Liu; Müller, Renate

    2012-01-01

    Abstract Through the last decades, environmentally and health-friendly production methods and conscientious use of resources have become crucial for reaching the goal of a more sustainable plant production. Protection of the environment requires careful consumption of limited resources and reduct....... In conclusion, molecular breeding approaches are dealt with in a way allowing a critical biological assessment and enabling the scientific community and public to put genetic engineering of ornamental plants into a perspective regarding their usefulness in plant breeding........ This review presents the more recent progress of genetic engineering in ornamental breeding, delivers an overview of the biological background of the used technologies and critically evaluates the usefulness of the strategies to obtain improved ornamental plants. First, genetic engineering is addressed......, compactness can be accomplished by using a natural transformation approach without recombinant DNA technology. Secondly, metabolic engineering approaches targeting elements of the ethylene signal transduction pathway are summarized as a possible alternative to avoid the use of chemical ethylene inhibitors...

  13. Engineering management of large scale systems

    Science.gov (United States)

    Sanders, Serita; Gill, Tepper L.; Paul, Arthur S.

    1989-01-01

    The organization of high technology and engineering problem solving, has given rise to an emerging concept. Reasoning principles for integrating traditional engineering problem solving with system theory, management sciences, behavioral decision theory, and planning and design approaches can be incorporated into a methodological approach to solving problems with a long range perspective. Long range planning has a great potential to improve productivity by using a systematic and organized approach. Thus, efficiency and cost effectiveness are the driving forces in promoting the organization of engineering problems. Aspects of systems engineering that provide an understanding of management of large scale systems are broadly covered here. Due to the focus and application of research, other significant factors (e.g., human behavior, decision making, etc.) are not emphasized but are considered.

  14. Perspectives d'amélioration du rendement à très faible charge des moteurs d'automobile Prospects for Lmprovinq the Very-Low-Load Efficiency of Automotive Engines

    Directory of Open Access Journals (Sweden)

    Douaud A.

    2006-11-01

    Full Text Available Le mauvais rendement énergétique des véhicules utilisés à très faible charge (circulation urbaine, vitesses limitées provient entre autres des combustions non optimales. Celles-ci sont de plusieurs types : combustion lente et/ou tardive, ratés de propagation. L'acquisition de cycles de pression au moyen du système DIGITAP développé à l'In-titut Français du Pétrole (IFP est décrite et le calcul instantané du travail cycle-à-cycle permet de définir un critère de stabilité de fonctionnement du moteur. L'analyse thermodynamique des cycles montre que la composition du mélange air + carburant + gaz résiduels, trop proche des limites de propagabilité de flamme, est à l'origine des phénomènes observés. Des voies d'action portant sur les gaz résiduels, la turbulence et les paramètres du système d'allumage sont dégagées et permettent des améliorations importantes du rendement. The poor energy efficiency of vehicles used at very low engine load (urban traffic, limited speeds comes from non-optimum combustion, among other causes. Such combustion may be of several types, i. e. slow and/or late combustion, propagation misfiring. The recording of pressure cycles by the DIGITAP system developed at Institut Français du Pétrole (IFP is described, and the instantaneous computing of the cycle-to-cycle work enables a stability criterion for engine operating to be described. The thermodynamic analysis of the cycles shows that the composition of the air + fuel + residuel gas mixture which is too close to flame propagation limits is at the origin of the phenomena observed. Methods of action concerning residual gases, turbulence and the parameters of the ignition system are determined and make for great improvements in efficiency and stability for such types of running.

  15. The research and practice of spacecraft software engineering

    Science.gov (United States)

    Chen, Chengxin; Wang, Jinghua; Xu, Xiaoguang

    2017-06-01

    In order to ensure the safety and reliability of spacecraft software products, it is necessary to execute engineering management. Firstly, the paper introduces the problems of unsystematic planning, uncertain classified management and uncontinuous improved mechanism in domestic and foreign spacecraft software engineering management. Then, it proposes a solution for software engineering management based on system-integrated ideology in the perspective of spacecraft system. Finally, a application result of spacecraft is given as an example. The research can provides a reference for executing spacecraft software engineering management and improving software product quality.

  16. Engineering β-sheet peptide assemblies for biomedical applications.

    Science.gov (United States)

    Yu, Zhiqiang; Cai, Zheng; Chen, Qiling; Liu, Menghua; Ye, Ling; Ren, Jiaoyan; Liao, Wenzhen; Liu, Shuwen

    2016-03-01

    Hydrogels have been widely studied in various biomedical applications, such as tissue engineering, cell culture, immunotherapy and vaccines, and drug delivery. Peptide-based nanofibers represent a promising new strategy for current drug delivery approaches and cell carriers for tissue engineering. This review focuses on the recent advances in the use of self-assembling engineered β-sheet peptide assemblies for biomedical applications. The applications of peptide nanofibers in biomedical fields, such as drug delivery, tissue engineering, immunotherapy, and vaccines, are highlighted. The current challenges and future perspectives for self-assembling peptide nanofibers in biomedical applications are discussed.

  17. Challenging the portfolio of powertrains perspective: Time to choose sides

    OpenAIRE

    Bakker, S.; Van der Vooren, A.

    2012-01-01

    In this viewpoint paper we challenge the portfolio perspective that envisions a future in which a wide variety of automotive powertrains and fuels will co-exist. We argue that this perspective is driven by normative ideas and rhetoric and that it is more likely that a very limited set of rather similar technologies will survive as successors to the fossil fuel powered internal combustion engine. Economies of scale of core components and the necessary build-up of infrastructures will eventuall...

  18. Systems engineering real estate development projects

    Science.gov (United States)

    Gusakova, Elena; Titarenko, Boris; Stepanov, Vitaliy

    2017-10-01

    In recent years, real estate development has accumulated a wealth of experience in implementing major projects, which requires comprehension and systematization. The scientific instrument of system engineering is studied in the article and is substantively interpreted with reference to real estate development projects. The most perspective approaches and models are substantiated, allowing strategically to plan the life cycle of the project as a whole, and also to solve the engineering butt problems of the project. The relevance of further scientific studies of regularities and specifics of the life cycle of real estate development projects conducted at the Moscow State University of Economics and Management at the ISTA department is shown.

  19. Engineers and Bildung

    DEFF Research Database (Denmark)

    Henriksen, Lars Bo

    2006-01-01

    What is an engineer? Or maybe better: how are engineers, and how are they “gebilded” in order to be able to be called engineers? In order to shed some light on this question we could ask: How is the relation between engineering and the making of an engineer, or the relation between engineering...... and Bildung. In this chapter, this relation in investigated. In the first part, I present three engineers and their careers. In the second part, the concept of Bildung is analyzed, and in the third part, it is the conceptual relation between Bildung, engineers, and engineering work that is of concern....

  20. Technological Perspectives for Air Base Communications.

    Science.gov (United States)

    1985-10-01

    day if personnel must be encased in chemical warfare suits. Moreover, there is no need to match proper wires together; color blindness is not a...cost associated with the present ’- minicomputer-based distributed networks. Engineering development and possibly some R&D are necessary, but the...fil" 940 TECNOLOGICAL. PERSPECTIVES FOR RJR ESE CM IRIN 1 (U) RAND ORP SANTA MONICA CA H H HARE OCT 85 UNCL~~R ANFI D I10N

  1. Industrial Education. "Small Engines".

    Science.gov (United States)

    Parma City School District, OH.

    Part of a series of curriculum guides dealing with industrial education in junior high schools, this guide provides the student with information and manipulative experiences on small gasoline engines. Included are sections on shop adjustment, safety, small engines, internal combustion, engine construction, four stroke engines, two stroke engines,…

  2. Department of Civil Engineering,

    African Journals Online (AJOL)

    USER

    2015-03-02

    Mar 2, 2015 ... Department of Civil Engineering, Faculty of Engineering, Universiti Putra, Malaysia,. Selangor, Malaysia. 2. Department of Environmental and Chemical Engineering, Faculty of Engineering, Universiti. Putra, Malaysia, Selangor, Malaysia. 3. Department of Civil Engineering, Federal University of Technology, ...

  3. Metabolic Engineering X Conference

    Energy Technology Data Exchange (ETDEWEB)

    Flach, Evan [American Institute of Chemical Engineers

    2015-05-07

    The International Metabolic Engineering Society (IMES) and the Society for Biological Engineering (SBE), both technological communities of the American Institute of Chemical Engineers (AIChE), hosted the Metabolic Engineering X Conference (ME-X) on June 15-19, 2014 at the Westin Bayshore in Vancouver, British Columbia. It attracted 395 metabolic engineers from academia, industry and government from around the globe.

  4. Subspecies of Hypolepis rugosula (Dennstaedtiaceae; Pteridophyta around the world: morphological and biogeographic perspectives

    Directory of Open Access Journals (Sweden)

    Pedro Bond Schwartsburd

    2014-06-01

    Full Text Available The "Hypolepis rugosula complex" has been the subject of great debate among pteridologists: some have considered H. rugosula a single subcosmopolitan (or circum-Antarctic species, whereas others have considered it a species-complex, encompassing several species. In the 1920s and 1930s, four geographically distinct varietiesof H. rugosula were recognized. In this work, we present a new taxonomy (with new combinations and statuses, as well as typification and full synonymy, together with complete distribution data for the species, with an infraspecific classification based on morphological and biogeographic perspectives. Hypolepis rugosula occurs in southern temperate regions and high-elevation tropical regions of the Americas, Africa (including Madagascar, Oceania and the Philippines, as well as in some isolated oceanic volcanic islands (e.g., Saint Helena and Tristan da Cunha. Here, 15 geographically distinct subspecies are recognized. All subspecies are geographically segregated from each other, except in New Zealand, where two occur sympatrically-possibly due to two different arrival and colonization times. Four patterns of "indument" (referring to catenate and glandular hairs collectively are distinguished. Different lineages are successful in their respective habitats; we observed two lineages with different ploidy levels (tetraploid and octoploid. Although long-distance dispersal is the best explanation for the extant distribution of H. rugosula;we do not exclude vicariance as a possible explanation for their occurrence on the land masses that were once united as Gondwana. Therefore, we are assuming that a fern species could remain unchanged for more than 70 Myr, and we are adopting the refugia theory, albeit with a different focus.

  5. Tšehhi parlamendi Eurointegratsioonikomisjoni liikme pr. Helena Rögnerova ettekanne / Helena Rögnerova

    Index Scriptorium Estoniae

    Rögnerova, Helena

    2002-01-01

    Ilmunud ka: Proceedings of the 8th International conference Estonia and the European Union : Estonia on its way to a changing Europe : October 31-November 2, 2001. - Tallinn, lk., lk. 80-82. Euroopa integratsioon on positiivne reageering globaliseerumise väljakutsetele

  6. Engineered nanomembranes for smart energy storage devices.

    Science.gov (United States)

    Wang, Xianfu; Chen, Yu; Schmidt, Oliver G; Yan, Chenglin

    2016-03-07

    Engineered nanomembranes are of great interest not only for large-scale energy storage devices, but also for on-chip energy storage integrated microdevices (such as microbatteries, microsupercapacitors, on-chip capacitors, etc.) because of their large active surfaces for electrochemical reactions, shortened paths for fast ion diffusion, and easy engineering for microdevice applications. In addition, engineered nanomembranes provide a lab-on-chip electrochemical device platform for probing the correlations of electrode structure, electrical/ionic conductivity, and electrochemical kinetics with device performance. This review focuses on the recent progress in engineered nanomembranes including tubular nanomembranes and planar nanomembranes, with the aim to provide a systematic summary of their fabrication, modification, and energy storage applications in lithium-ion batteries, lithium-oxygen batteries, on-chip electrostatic capacitors and micro-supercapacitors. A comprehensive understanding of the relationship between engineered nanomembranes and electrochemical properties of lithium ion storage with engineered single-tube microbatteries is given, and the flexibility and transparency of micro-supercapacitors is also discussed. Remarks on challenges and perspectives related to engineered nanomembranes for the further development of energy storage applications conclude this review.

  7. Net-Centric, Enterprise-Wide System-of-Systems Engineering and the Global Information Grid

    National Research Council Canada - National Science Library

    Kaplan, Jeremy

    2006-01-01

    ...; yet often seem to produce disappointing results. Net-centric, enterprise-wide system-of-systems engineering addresses aspects of this problem from integrated social, organizational, and technical perspectives...

  8. Modular Engineering Concept at Novo Nordisk Engineering

    DEFF Research Database (Denmark)

    Moelgaard, Gert; Miller, Thomas Dedenroth

    1997-01-01

    This report describes the concept of a new engineering method at Novo Nordisk Engineering: Modular Engineering (ME). Three tools are designed to support project phases with different levels of detailing and abstraction. ME supports a standard, cross-functional breakdown of projects that facilitates...

  9. Environmental Engineering in Mining Engineering Education

    Science.gov (United States)

    Mahamud-Lopez, Manuel Maria; Menendez-Aguado, Juan Maria

    2005-01-01

    In this paper, the current profile of the environmental engineer and the programming of the subject "Environmental Engineering and Technology" corresponding to the studies of Mining Engineering at the University of Oviedo in Spain, is discussed. Professional profile, student knowledge prior to and following instruction as well as…

  10. Magical Engineering Plastic

    International Nuclear Information System (INIS)

    Kim, Gwang Ung

    1988-01-01

    This book introduces engineering plastic about advantage of engineering plastic, plastic material from processing method, plastic shock, plastic until now, background of making of engineering plastic, wonderful engineering plastic science such as a high molecule and molecule, classification of high molecule, difference between metal and high molecule, heat and high molecule materials, and property of surface, engineering plastic of dream like from linseed oil to aramid, small dictionary of engineering plastic.

  11. A Research Agenda for Security Engineering

    Directory of Open Access Journals (Sweden)

    Rich Goyette

    2013-08-01

    Full Text Available Despite nearly 30 years of research and application, the practice of information system security engineering has not yet begun to exhibit the traits of a rigorous scientific discipline. As cyberadversaries have become more mature, sophisticated, and disciplined in their tradecraft, the science of security engineering has not kept pace. The evidence of the erosion of our digital security – upon which society is increasingly dependent – appears in the news almost daily. In this article, we outline a research agenda designed to begin addressing this deficit and to move information system security engineering toward a mature engineering discipline. Our experience suggests that there are two key areas in which this movement should begin. First, a threat model that is actionable from the perspectives of risk management and security engineering should be developed. Second, a practical and relevant security-measurement framework should be developed to adequately inform security-engineering and risk-management processes. Advances in these areas will particularly benefit business/government risk assessors as well as security engineers performing security design work, leading to more accurate, meaningful, and quantitative risk analyses and more consistent and coherent security design decisions. Threat modelling and security measurement are challenging activities to get right – especially when they need to be applied in a general context. However, these are decisive starting points because they constitute the foundation of a scientific security-engineering practice. Addressing these challenges will require stronger and more coherent integration between the sub-disciplines of risk assessment and security engineering, including new tools to facilitate that integration. More generally, changes will be required in the way security engineering is both taught and practiced to take into account the holistic approach necessary from a mature, scientific

  12. A practitioner’s experiences operationalizing Resilience Engineering

    International Nuclear Information System (INIS)

    Lay, E.; Branlat, M.; Woods, Z.

    2015-01-01

    Resilience Engineering (RE) is a reframed perspective. This begs the question, “How to operationalize a shift in perspective?” We share strategies, tactics, experiences, and observations from implementing Resilience Engineering in power generation equipment maintenance. Use of Resilience Engineering principles shifts focus to the future, to systems, and to how people really work (not the idealized version of work). We more effectively shape outcomes as we pay attention to what’s coming, looking for signs we’re outside normal work or running out of margins that enable us to adapt and respond. Use of these principles opens new possibilities grounded in theoretical fields of biology, cognitive and system sciences (understand Cartesian views of the world work well for machines but not for people) and underlain by core principles (e.g., people fundamentally want to do a good job, actions taken make sense at the time, and system factors are tremendously influential on outcomes). This paper presents a practitioner’s account of a Resilience Engineering approach in the context of power plant maintenance. The paper will describe how the introduction of RE principles was made possible through supporting/fostering shifts in perspective and gaining buy-in at various levels of the organization. - Highlights: • Resilience Engineering is a shifted perspective as compared to a new program. • RE is grounded in fields of biology, cognitive and system sciences. • We share strategies, tactics, experiences, and observations for implementing RE. • We used a middle out approach

  13. Engine Test Facility (ETF)

    Data.gov (United States)

    Federal Laboratory Consortium — The Air Force Arnold Engineering Development Center's Engine Test Facility (ETF) test cells are used for development and evaluation testing of propulsion systems for...

  14. Advanced Metasearch Engine Technology

    CERN Document Server

    Meng, Weiyi

    2010-01-01

    Among the search tools currently on the Web, search engines are the most well known thanks to the popularity of major search engines such as Google and Yahoo!. While extremely successful, these major search engines do have serious limitations. This book introduces large-scale metasearch engine technology, which has the potential to overcome the limitations of the major search engines. Essentially, a metasearch engine is a search system that supports unified access to multiple existing search engines by passing the queries it receives to its component search engines and aggregating the returned

  15. Contemporary engineering economics

    CERN Document Server

    Park, Chan S

    2011-01-01

    Contemporary Engineering Economics, 5/e, is intended for undergraduate engineering students taking introductory engineering economics while appealing to the full range of engineering disciplines for which this course is often required: industrial, civil, mechanical, electrical, computer, aerospace, chemical, and manufacturing engineering, as well as engineering technology. This edition has been thoroughly revised and updated while continuing to adopt a contemporary approach to the subject, and teaching, of engineering economics. This text aims not only to build a sound and comprehensive coverage of engineering economics, but also to address key educational challenges, such as student difficulty in developing the analytical skills required to make informed financial decisions.

  16. A socio-technical perspective on the electrification of the automobile: Niche and regime interaction

    NARCIS (Netherlands)

    Dijk, Marc

    2014-01-01

    This paper offers a socio-technical perspective on how the introduction of various alternatives to the internal combustion engine, especially the full-electric vehicle, influences the established propulsion technology (ICE). This perspective helps to move beyond the well-known incremental vs.

  17. Impact of systems biology on metabolic engineering of Saccharomyces cerevisiae

    DEFF Research Database (Denmark)

    Nielsen, Jens; Jewett, Michael Christopher

    2008-01-01

    in the industrial application of this yeast. Developments in genomics and high-throughput systems biology tools are enhancing one's ability to rapidly characterize cellular behaviour, which is valuable in the field of metabolic engineering where strain characterization is often the bottleneck in strain development...... programmes. Here, the impact of systems biology on metabolic engineering is reviewed and perspectives on the role of systems biology in the design of cell factories are given....

  18. Biofuels: stakes, perspectives and researches; Biocarburants: enjeux, perspectives et recherches

    Energy Technology Data Exchange (ETDEWEB)

    Appert, O.; Ballerin, D.; Montagne, X.

    2004-07-01

    The French institute of petroleum (IFP) is a major intervener of the biofuels sector, from the production to the end-use in engines. In this press conference, the IFP takes stock of the technological, environmental and economical stakes of today and future biofuel production processes and of their impact on transports. This document gathers 2 presentations dealing with: IFP's research strategy on biofuels (transparencies: context; today's processes: ethanol, ETBE, bio-diesel; tomorrows processes: biomass to liquid; perspectives), bio-diesel fuel: the Axens process selected by Diester Industrie company for its Sete site project of bio-diesel production unit. The researches carried out at the IFP on biofuels and biomass are summarized in an appendix: advantage and drawbacks of biofuels, the ethanol fuel industry, the bio-diesel industry, biomass to liquid fuels, French coordinated research program, statistical data of biofuel consumption in France, Spain and Germany. (J.S.)

  19. TEACHING ENGINEERING STUDENTS CREATIVITY: A REVIEW OF APPLIED STRATEGIES

    Directory of Open Access Journals (Sweden)

    Chunfang Zhou

    2012-06-01

    Full Text Available Recent studies have emphasized the necessity of educating creative engineers. This paper aims to provide a literature review by answering what strategies can be applied to develop creativity in engineering education. As the literature demonstrates, creativity has been studied by a diversity of perspectives such as psychology, social psychology and sociology. Studies on engineering creativity indicate the importance of problem-solving skills for engineers. For developing creativity, strategies such as using thinking tools, learning by solving problems and building learning environment conductive to creativity have been suggested in engineering education. Problem-Based Learning (PBL is a good example of fostering creative engineers, so characteristics of PBL, learning cycle in PBL and methods for enhancing group dynamics in PBL are discussed in this paper.

  20. Engineering solutions for sustainability materials and resources II

    CERN Document Server

    Mishra, Brajendra; Anderson, Dayan; Sarver, Emily; Neelameggham, Neale

    2016-01-01

    With impending and burgeoning societal issues affecting both developed and emerging nations, the global engineering community has a responsibility and an opportunity to truly make a difference and contribute. The papers in this collection address what materials and resources are integral to meeting basic societal sustainability needs in critical areas of energy, transportation, housing, and recycling. Contributions focus on the engineering answers for cost-effective, sustainable pathways; the strategies for effective use of engineering solutions; and the role of the global engineering community. Authors share perspectives on the major engineering challenges that face our world today; identify, discuss, and prioritize engineering solution needs; and establish how these fit into developing global-demand pressures for materials and human resources.

  1. Perivascular cells and tissue engineering: Current applications and untapped potential.

    Science.gov (United States)

    Avolio, Elisa; Alvino, Valeria V; Ghorbel, Mohamed T; Campagnolo, Paola

    2017-03-01

    The recent development of tissue engineering provides exciting new perspectives for the replacement of failing organs and the repair of damaged tissues. Perivascular cells, including vascular smooth muscle cells, pericytes and other tissue specific populations residing around blood vessels, have been isolated from many organs and are known to participate to the in situ repair process and angiogenesis. Their potential has been harnessed for cell therapy of numerous pathologies; however, in this Review we will discuss the potential of perivascular cells in the development of tissue engineering solutions for healthcare. We will examine their application in the engineering of vascular grafts, cardiac patches and bone substitutes as well as other tissue engineering applications and we will focus on their extensive use in the vascularization of engineered constructs. Additionally, we will discuss the emerging potential of human pericytes for the development of efficient, vascularized and non-immunogenic engineered constructs. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  2. Sex segregation in undergraduate engineering majors

    Science.gov (United States)

    Litzler, Elizabeth

    Gender inequality in engineering persists in spite of women reaching parity in college enrollments and degrees granted. To date, no analyses of educational sex segregation have comprehensively examined segregation within one discipline. To move beyond traditional methods of studying the long-standing stratification by field of study in higher education, I explore gender stratification within one field: engineering. This dissertation investigates why some engineering disciplines have a greater representation of women than other engineering disciplines. I assess the individual and institutional factors and conditions associated with women's representation in certain engineering departments and compare the mechanisms affecting women's and men's choice of majors. I use national data from the Engineering Workforce Commission, survey data from 21 schools in the Project to Assess Climate in Engineering study, and Carnegie Foundation classification information to study sex segregation in engineering majors from multiple perspectives: the individual, major, institution, and country. I utilize correlations, t-tests, cross-tabulations, log-linear modeling, multilevel logistic regression and weighted least squares regression to test the relative utility of alternative explanations for women's disproportionate representation across engineering majors. As a whole, the analyses illustrate the importance of context and environment for women's representation in engineering majors. Hypotheses regarding hostile climate and discrimination find wide support across different analyses, suggesting that women's under-representation in certain engineering majors is not a question of choice or ability. However, individual level factors such as having engineering coursework prior to college show an especially strong association with student choice of major. Overall, the analyses indicate that institutions matter, albeit less for women, and women's under-representation in engineering is not

  3. Fostering Creative Engineers

    DEFF Research Database (Denmark)

    Zhou, Chunfang

    2012-01-01

    that engineering students should master. This paper aims to illustrate deeply why engineering education needs to foster creative students to face the challenges of complex engineering work. So a literature review will be provided by focusing on the necessity of developing creativity in engineering education...

  4. European perspectives on security research

    CERN Document Server

    2011-01-01

    Europe’s networked societies of today are shaped by a growing interconnection in almost all areas of life. The complexity of our infrastructures and the concurrent accessibility to means of destruction by terrorist groups and individual perpetrators call for innovative security solutions. However, such evolving innovations inevitably raise fundamental questions of concern in our societies. How do we balance the imperatives of securing our citizens and infrastructures on the one hand, and of protecting of our sacredly held civil liberties on the other? The topical network ‘Safety and Security’ of acatech – the German Academy of Science and Engineering – invited experts from the science academies of various European countries to share their perspectives on security research and the aspect of safety during a two-day workshop hosted by the Fraunhofer Institute for High-Speed Dynamics, Ernst-Mach-Institut in March 2010. This publication is a compilation of contributions made during the workshop.

  5. Advances in through-life engineering services

    CERN Document Server

    Roy, Rajkumar; Shaw, Andy

    2017-01-01

    This edited book offers further advances, new perspectives, and developments from world leaders in the field of through-life engineering services (TES). It builds up on the earlier book by the same authors entitled: “Through-life Engineering Services: Motivation, Theory and Practice.” This compendium introduces and discusses further, the developments in workshop-based and 'in situ' maintenance and support of high-value engineering products, as well as the application of drone technology for autonomous and self-healing product support. The links between ‘integrated planning’ and planned obsolescence, risk and cost modelling are also examined. The role of data, information, and knowledge management relative to component and system degradation and failure is also presented. This is supported by consideration of the effects upon the maintenance and support decision by the presence of 'No Fault Found' error signals within system data. Further to this the role of diagnostics and prognostics is also discusse...

  6. Information retrieval implementing and evaluating search engines

    CERN Document Server

    Büttcher, Stefan; Cormack, Gordon V

    2016-01-01

    Information retrieval is the foundation for modern search engines. This textbook offers an introduction to the core topics underlying modern search technologies, including algorithms, data structures, indexing, retrieval, and evaluation. The emphasis is on implementation and experimentation; each chapter includes exercises and suggestions for student projects. Wumpus -- a multiuser open-source information retrieval system developed by one of the authors and available online -- provides model implementations and a basis for student work. The modular structure of the book allows instructors to use it in a variety of graduate-level courses, including courses taught from a database systems perspective, traditional information retrieval courses with a focus on IR theory, and courses covering the basics of Web retrieval. In addition to its classroom use, Information Retrieval will be a valuable reference for professionals in computer science, computer engineering, and software engineering.

  7. Fundamental of biomedical engineering

    CERN Document Server

    Sawhney, GS

    2007-01-01

    About the Book: A well set out textbook explains the fundamentals of biomedical engineering in the areas of biomechanics, biofluid flow, biomaterials, bioinstrumentation and use of computing in biomedical engineering. All these subjects form a basic part of an engineer''s education. The text is admirably suited to meet the needs of the students of mechanical engineering, opting for the elective of Biomedical Engineering. Coverage of bioinstrumentation, biomaterials and computing for biomedical engineers can meet the needs of the students of Electronic & Communication, Electronic & Instrumenta

  8. Studying Engineering Practice

    DEFF Research Database (Denmark)

    Buch, Anders

    2015-01-01

    The study of engineering practices has been the focus of Engineering Studies over the last three decades. Theses studies have used ethnographic and grounded methods in order to investigate engineering practices as they unfold in natural settings - in workplaces and engineering education. However......, engineering studies have not given much attention to conceptually clarifying what should be understood by 'engineering practices' and more precisely account for the composition and organization of the entities and phenomena that make up the practices. This chapter investigates and discusses how a 'practice...... will draw out some methodological consequences and discuss the ramifications of a practice theoretical approach for Engineering Studies....

  9. Recent Progress in Engine Noise Reduction Technologies

    Science.gov (United States)

    Huff, Dennis; Gliebe, Philip

    2003-01-01

    Highlights from NASA-funded research over the past ten years for aircraft engine noise reduction are presented showing overall technical plans, accomplishments, and selected applications to turbofan engines. The work was sponsored by NASA's Advanced Subsonic Technology (AST) Noise Reduction Program. Emphasis is given to only the engine noise reduction research and significant accomplishments that were investigated at Technology Readiness Levels ranging from 4 to 6. The Engine Noise Reduction sub-element was divided into four work areas: source noise prediction, model scale tests, engine validation, and active noise control. Highlights from each area include technologies for higher bypass ratio turbofans, scarf inlets, forward-swept fans, swept and leaned stators, chevron/tabbed nozzles, advanced noise prediction analyses, and active noise control for fans. Finally, an industry perspective is given from General Electric Aircraft Engines showing how these technologies are being applied to commercial products. This publication contains only presentation vu-graphs from an invited lecture given at the 41st AIAA Aerospace Sciences Meeting, January 6-9, 2003.

  10. Development of hydrogels for regenerative engineering.

    Science.gov (United States)

    Guan, Xiaofei; Avci-Adali, Meltem; Alarçin, Emine; Cheng, Hao; Kashaf, Sara Saheb; Li, Yuxiao; Chawla, Aditya; Jang, Hae Lin; Khademhosseini, Ali

    2017-05-01

    The aim of regenerative engineering is to restore complex tissues and biological systems through convergence in the fields of advanced biomaterials, stem cell science, and developmental biology. Hydrogels are one of the most attractive biomaterials for regenerative engineering, since they can be engineered into tissue mimetic 3D scaffolds to support cell growth due to their similarity to native extracellular matrix. Advanced nano- and micro-technologies have dramatically increased the ability to control properties and functionalities of hydrogel materials by facilitating biomimetic fabrication of more sophisticated compositions and architectures, thus extending our understanding of cell-matrix interactions at the nanoscale. With this perspective, this review discusses the most commonly used hydrogel materials and their fabrication strategies for regenerative engineering. We highlight the physical, chemical, and functional modulation of hydrogels to design and engineer biomimetic tissues based on recent achievements in nano- and micro-technologies. In addition, current hydrogel-based regenerative engineering strategies for treating multiple tissues, such as musculoskeletal, nervous and cardiac tissue, are also covered in this review. The interaction of multiple disciplines including materials science, cell biology, and chemistry, will further play an important role in the design of functional hydrogels for the regeneration of complex tissues. Copyright © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. The development of biomedical engineering as experienced by one biomedical engineer.

    Science.gov (United States)

    Newell, Jonathan C

    2012-12-12

    This personal essay described the development of the field of Biomedical Engineering from its early days, from the perspective of one who lived through that development. It describes the making of a major invention using data that had been rejected by other scientists, the re-discovery of an obscure fact of physiology and its use in developing a major medical instrument, the development of a new medical imaging modality, and the near-death rescue of a research project. The essay concludes with comments about the development and present status of impedance imaging, and recent changes in the evolution of biomedical engineering as a field.

  12. Knowledge Service Engineering Handbook

    CERN Document Server

    Kantola, Jussi

    2012-01-01

    Covering the emerging field of knowledge service engineering, this groundbreaking handbook outlines how to acquire and utilize knowledge in the 21st century. Drawn on the expertise of the founding faculty member of the world's first university knowledge engineering service department, this book describes what knowledge services engineering means and how it is different from service engineering and service production. Presenting multiple cultural aspects including US, Finnish, and Korean, this handbook provides engineering, systemic, industry, and consumer use viewpoints to knowledge service sy

  13. Software Engineering Guidebook

    Science.gov (United States)

    Connell, John; Wenneson, Greg

    1993-01-01

    The Software Engineering Guidebook describes SEPG (Software Engineering Process Group) supported processes and techniques for engineering quality software in NASA environments. Three process models are supported: structured, object-oriented, and evolutionary rapid-prototyping. The guidebook covers software life-cycles, engineering, assurance, and configuration management. The guidebook is written for managers and engineers who manage, develop, enhance, and/or maintain software under the Computer Software Services Contract.

  14. Mathematics in Engineering

    OpenAIRE

    Chatterjee, Anindya

    2005-01-01

    I try to convey some of the variety and excitement involved in the application of mathematics to engineering problems; to provide a taste of some actual mathematical calculations that engineers do; and finally, to make clear the distinctions between the applied subject of engineering and its purer parents, which include mathematics and the physical sciences. Two main points of this article are that in engineering it is approximation, and not truth, that reigns; and that an engineer carries a ...

  15. Mechanical engineer's handbook

    CERN Document Server

    Marghitu, Dan B

    2001-01-01

    The Mechanical Engineer's Handbook was developed and written specifically to fill a need for mechanical engineers and mechanical engineering students throughout the world. With over 1000 pages, 550 illustrations, and 26 tables the Mechanical Engineer's Handbook is very comprehensive, yet affordable, compact, and durable. The Handbook covers all major areas of mechanical engineering with succinct coverage of the definitions, formulas, examples, theory, proofs, and explanations of all principle subject areas. The Handbook is an essential, practical companion for all mechanic

  16. Genome scale engineering techniques for metabolic engineering.

    Science.gov (United States)

    Liu, Rongming; Bassalo, Marcelo C; Zeitoun, Ramsey I; Gill, Ryan T

    2015-11-01

    Metabolic engineering has expanded from a focus on designs requiring a small number of genetic modifications to increasingly complex designs driven by advances in genome-scale engineering technologies. Metabolic engineering has been generally defined by the use of iterative cycles of rational genome modifications, strain analysis and characterization, and a synthesis step that fuels additional hypothesis generation. This cycle mirrors the Design-Build-Test-Learn cycle followed throughout various engineering fields that has recently become a defining aspect of synthetic biology. This review will attempt to summarize recent genome-scale design, build, test, and learn technologies and relate their use to a range of metabolic engineering applications. Copyright © 2015 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

  17. Future trends in agricultural engineering.

    NARCIS (Netherlands)

    Jongebreur, A.A.; Speelman, L.

    1997-01-01

    Beside traditional mechanical engineering, other engineering branches such as electronics, control engineering and physics play their specific role within the agricultural engineering field. Agricultural engineering has affected and stimulated major changes in agriculture. In the last decades

  18. Introduction to Web Information Retrieval: A User Perspective

    Indian Academy of Sciences (India)

    (WebIR) and issues in searching the World Wide Web from a user perspective. We review different kinds of search engines and the features they offer. With the help of ex- amples, we show how these features can be utilized to narrow down on the search results. Introduction. The world wide web (WWW) has become so ...

  19. Progenitor cells in the kidney: biology and therapeutic perspectives

    NARCIS (Netherlands)

    Rookmaaker, M.B.; Verhaar, M.C.; Zonneveld, A.J. van; Rabelink, T.J.

    2004-01-01

    Progenitor cells in the kidney: Biology and therapeutic perspectives. The stem cell may be viewed as an engineer who can read the blue print and become the building. The role of this fascinating cell in physiology and pathophysiology has recently attracted a great deal of interest. The archetype of

  20. Structural Learning Theory: Current Status and New Perspectives.

    Science.gov (United States)

    Scandura, Joseph M.

    2001-01-01

    Presents the current status and new perspectives on the Structured Learning Theory (SLT), with special consideration given to how SLT has been influenced by recent research in software engineering. Topics include theoretical constructs; content domains; structural analysis; cognition; assessing behavior potential; and teaching and learning issues,…

  1. A Matter of Perspective

    Science.gov (United States)

    2012-04-21

    can differ depending on whether a person is influenced by either an individualistic or collectivistic environment. Although perspective -taking...A Matter of Perspective by Lieutenant Colonel Kara Soules United States Army United States Army War College Class... Perspective 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) LTC Kara Soules, U.S. Army 5d. PROJECT NUMBER

  2. B 150 civil engineering futures

    DEFF Research Database (Denmark)

    specific climatic challenge or clean the air. With nanotechnology, the artificial and the natural move closer together; this is the perspective for civil engineer Chris McCarthy’s work all over the world. And what is new is not just the way the construction materials are put together; they also require...... consisting of free, public lectures by international experts, and workshops and master classes on this question open to everyone in the building industry. The use of glass as a construction material would have been considered impossible a few years ago. But work on achieving complete transparency was a major...... the story of transparency and dematerialisation is far from complete. New construction materials have also come from new knowledge at the nano-scale. Design at the molecular level opens the way for materials with completely new properties and options, e.g. active materials, designed to cope with some...

  3. B 150 civil engineering futures

    DEFF Research Database (Denmark)

    consisting of free, public lectures by international experts, and workshops and master classes on this question open to everyone in the building industry. The use of glass as a construction material would have been considered impossible a few years ago. But work on achieving complete transparency was a major...... specific climatic challenge or clean the air. With nanotechnology, the artificial and the natural move closer together; this is the perspective for civil engineer Chris McCarthy’s work all over the world. And what is new is not just the way the construction materials are put together; they also require...... a huge investment in new production equipment and working processes for the craftsmen who use them. Completely new thinking is needed when an electrical impulse is used to improve the penetration of a chemical. The same applies when classical materials like concrete are given new properties or when...

  4. Engineering Foundation Conference on Enzyme Engineering XII

    National Research Council Canada - National Science Library

    Russell, Author

    1997-01-01

    Partial Contents: Preparation and Properties of Designed Biocatalysts Biopolymer Structure and Function Biocatalysts under Extreme Environments Application of Protein Expression in Biocatalysis Biochemical Engineering of Enzyme Systems...

  5. Handbook of Software Engineering and Knowledge Engineering

    CERN Document Server

    2001-01-01

    This is the first handbook to cover comprehensively both software engineering and knowledge engineering - two important fields that have become interwoven in recent years. Over 60 international experts have contributed to the book. Each chapter has been written in such a way that a practitioner of software engineering and knowledge engineering can easily understand and obtain useful information. Each chapter covers one topic and can be read independently of other chapters, providing both a general survey of the topic and an in-depth exposition of the state of the art.

  6. Engine Research Center: Advanced Diesel Engine Research

    National Research Council Canada - National Science Library

    Corradini, M

    1999-01-01

    .... Fundamental projects addressing continued development of advanced multidimensional modeling, advanced diagnostic development, experimental investigation of fluid mechanic mixing phenomena and engine...

  7. Site systems engineering: Systems engineering management plan

    Energy Technology Data Exchange (ETDEWEB)

    Grygiel, M.L. [Westinghouse Hanford Co., Richland, WA (United States)

    1996-05-03

    The Site Systems Engineering Management Plan (SEMP) is the Westinghouse Hanford Company (WHC) implementation document for the Hanford Site Systems Engineering Policy, (RLPD 430.1) and Systems Engineering Criteria Document and Implementing Directive, (RLID 430.1). These documents define the US Department of Energy (DOE), Richland Operations Office (RL) processes and products to be used at Hanford to implement the systems engineering process at the site level. This SEMP describes the products being provided by the site systems engineering activity in fiscal year (FY) 1996 and the associated schedule. It also includes the procedural approach being taken by the site level systems engineering activity in the development of these products and the intended uses for the products in the integrated planning process in response to the DOE policy and implementing directives. The scope of the systems engineering process is to define a set of activities and products to be used at the site level during FY 1996 or until the successful Project Hanford Management Contractor (PHMC) is onsite as a result of contract award from Request For Proposal DE-RP06-96RL13200. Following installation of the new contractor, a long-term set of systems engineering procedures and products will be defined for management of the Hanford Project. The extent to which each project applies the systems engineering process and the specific tools used are determined by the project`s management.

  8. Biomedical engineering education through global engineering teams.

    Science.gov (United States)

    Scheffer, C; Blanckenberg, M; Garth-Davis, B; Eisenberg, M

    2012-01-01

    Most industrial projects require a team of engineers from a variety of disciplines. The team members are often culturally diverse and geographically dispersed. Many students do not acquire sufficient skills from typical university courses to function efficiently in such an environment. The Global Engineering Teams (GET) programme was designed to prepare students such a scenario in industry. This paper discusses five biomedical engineering themed projects completed by GET students. The benefits and success of the programme in educating students in the field of biomedical engineering are discussed.

  9. Engineering Ethics: A Critical Dimension of The Profession

    Directory of Open Access Journals (Sweden)

    Nael Barakat

    2011-07-01

    Full Text Available Engineering has always had a massive impact on human health and welfare. Unfortunately, the public only realizes the magnitude of this impact when very few engineering disasters occur, like huge oil spells in the sea or the failure of an aero-plane or a building. This is in spite of the plethora of engineering systems working perfectly around the clock to enhance every miniature aspect of public health and welfare. The ethical dimension of the engineering profession deals with the interaction with the public. However, engineering ethics are critical for reasons beyond keeping out of legal trouble and guarding the health and safety of humans. Ethics are necessary for the survival and continuity of the profession itself, amongst other reasons. Therefore, engineering codes of ethics have been set by professional societies and engineering ethics have been emphasized by accreditation organizations to be an integral part of the engineering curricula. In addition, ethics is the framework that allows the handling of evolving issues related to the profession of engineering. Examples of these issues include the globalization of the practice, continuous professional development (CPD of the practitioners, and issues of emerging technologies (e.g. nanotechnology. In the midst of this huge dimension, the engineering instructor is challenged to incorporate engineering ethics in a packed curriculum. This paper will provide a quick overview of the basic concepts and definitions of engineering ethics as well as the importance of studying engineering ethics. Some recent engineering ethics challenges will be listed with focus on globalization, its influence on the professional and ethical side of the profession, and the perspective of the educator. Moreover, some suggested strategies and best practices to integrate engineering ethics in the curriculum will be discussed.

  10. How ecological engineering can serve in coastal protection

    NARCIS (Netherlands)

    Borsje, B.W.; Van Wesenbeeck, B.K.; Dekker, F.; Paalvast, P.; Bouma, T.J.; van Katwijk, M.; De Vries, M.B.

    2011-01-01

    Traditionally, protection of the coastal area from flooding is approached from an engineering perspective. This approach has often resulted in negative or unforeseen impacts on local ecology and is even known to impact surrounding ecosystems on larger scales. In this paper, the utilization of

  11. Modeling for Control of a Wobble–Yoke Stirling Engine

    NARCIS (Netherlands)

    García–Canseco, Eloísa; Scherpen, Jacquelien M.A.; Kuindersma, Marnix

    2009-01-01

    In this paper we derive the dynamic model of a four–cylinder double–acting wobble–yoke Stirling engine. In contrast with the classical thermodynamics methods that dominate the literature of Stirling mechanisms, we present a control system perspective to obtain a useful model for the analysis and

  12. Introducing Water-Treatment Subjects into Chemical Engineering Education.

    Science.gov (United States)

    Caceres, L.; And Others

    1992-01-01

    Proposes that inclusion of waste water treatment subjects within the chemical engineering curriculum can provide students with direct access to environmental issues from both a biotechnological and an ethical perspective. The descriptive details of water recycling at a copper plant and waste water stabilization ponds exemplify this approach from…

  13. Is Attending Lectures Still Relevant in Engineering Education?

    Science.gov (United States)

    Fitzpatrick, J.; Cronin, K.; Byrne, E.

    2011-01-01

    A case study was conducted on a group of undergraduate chemical engineering students to assess the relevance of attending lectures from a student perspective and to understand why these students attend and do not attend lectures with a view to developing approaches to teaching, which are of greater interest and benefit to student learning. The…

  14. 15th IEEE International Conference on Intelligent Engineering Systems

    CERN Document Server

    Živčák, Jozef; Aspects of Computational Intelligence Theory and Applications

    2013-01-01

    This volume covers the state-of-the art of the research and development in various aspects of computational intelligence and gives some perspective directions of development. Except the traditional engineering areas that contain theoretical knowledge, applications, designs and projects, the book includes the area of use of computational intelligence in biomedical engineering. „Aspects of Computational Intelligence: Theory and Applications” is a compilation of carefully selected extended papers written on the basis of original contributions presented at the 15th IEEE International Conference on Intelligent Engineering Systems 2011, INES 2011 held at June 23.-26. 2011 in AquaCity Poprad, Slovakia.    

  15. Multimedia Image Technology and Computer Aided Manufacturing Engineering Analysis

    Science.gov (United States)

    Nan, Song

    2018-03-01

    Since the reform and opening up, with the continuous development of science and technology in China, more and more advanced science and technology have emerged under the trend of diversification. Multimedia imaging technology, for example, has a significant and positive impact on computer aided manufacturing engineering in China. From the perspective of scientific and technological advancement and development, the multimedia image technology has a very positive influence on the application and development of computer-aided manufacturing engineering, whether in function or function play. Therefore, this paper mainly starts from the concept of multimedia image technology to analyze the application of multimedia image technology in computer aided manufacturing engineering.

  16. CRISPR/Cas9 advances engineering of microbial cell factories

    DEFF Research Database (Denmark)

    Jakociunas, Tadas; Jensen, Michael Krogh; Keasling, Jay D.

    2016-01-01

    interspaced palindromic repeats (CRISPR) and its associated proteins (Cas) have become the method of choice for precision genome engineering in many organisms due to their orthogonality, versatility and efficacy. Here we review the strategies adopted for implementation of RNA-guided CRISPR/Cas9 genome editing......-RNAs will be highlighted. Finally, this review will provide a perspective on the immediate challenges and opportunities foreseen by the use of CRISPR/Cas9 genome engineering and regulation in the context of metabolic engineering....

  17. Applied evolutionary theories for engineering of secondary metabolic pathways.

    Science.gov (United States)

    Bachmann, Brian O

    2016-12-01

    An expanded definition of 'secondary metabolism' is emerging. Once the exclusive provenance of naturally occurring organisms, evolved over geological time scales, secondary metabolism increasingly encompasses molecules generated via human engineered biocatalysts and biosynthetic pathways. Many of the tools and strategies for enzyme and pathway engineering can find origins in evolutionary theories. This perspective presents an overview of selected proposed evolutionary strategies in the context of engineering secondary metabolism. In addition to the wealth of biocatalysts provided via secondary metabolic pathways, improving the understanding of biosynthetic pathway evolution will provide rich resources for methods to adapt to applied laboratory evolution. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Comparative Toxicity of Gasoline and Diesel Engine Emissions

    Energy Technology Data Exchange (ETDEWEB)

    JeanClare Seagrave; Joe L. Mauderly; Barbara Zielinska; John Sagebiel; Kevin Whitney; Doughlas R. Lawson; Michael Gurevich

    2000-06-19

    Better information on the comparative toxicity of airborne emissions from different types of engines is needed to guide the development of heavy vehicle engine, fuel, lubricant, and exhaust after-treatment technologies, and to place the health hazards of current heavy vehicle emissions in their proper perspective. To help fill this information gap, samples of vehicle exhaust particles and semi-volatile organic compounds (SVOC) were collected and analyzed. The biological activity of the combined particle-SVOC samples is being tested using standardized toxicity assays. This report provides an update on the design of experiments to test the relative toxicity of engine emissions from various sources.

  19. Teaching Engineering Practices

    Science.gov (United States)

    Cunningham, Christine M.; Carlsen, William S.

    2014-03-01

    Engineering is featured prominently in the Next Generation Science Standards (NGSS) and related reform documents, but how its nature and methods are described is problematic. This paper is a systematic review and critique of that representation, and proposes that the disciplinary core ideas of engineering (as described in the NGSS) can be disregarded safely if the practices of engineering are better articulated and modeled through student engagement in engineering projects. A clearer distinction between science and engineering practices is outlined, and prior research is described that suggests that precollege engineering design can strengthen children's understandings about scientific concepts. However, a piecemeal approach to teaching engineering practices is unlikely to result in students understanding engineering as a discipline. The implications for science teacher education are supplemented with lessons learned from a number of engineering education professional development projects.

  20. Reliability and safety engineering

    CERN Document Server

    Verma, Ajit Kumar; Karanki, Durga Rao

    2016-01-01

    Reliability and safety are core issues that must be addressed throughout the life cycle of engineering systems. Reliability and Safety Engineering presents an overview of the basic concepts, together with simple and practical illustrations. The authors present reliability terminology in various engineering fields, viz.,electronics engineering, software engineering, mechanical engineering, structural engineering and power systems engineering. The book describes the latest applications in the area of probabilistic safety assessment, such as technical specification optimization, risk monitoring and risk informed in-service inspection. Reliability and safety studies must, inevitably, deal with uncertainty, so the book includes uncertainty propagation methods: Monte Carlo simulation, fuzzy arithmetic, Dempster-Shafer theory and probability bounds. Reliability and Safety Engineering also highlights advances in system reliability and safety assessment including dynamic system modeling and uncertainty management. Cas...