Men's and Women's Intentions to Persist in Undergraduate Engineering Degree Programs

Science.gov (United States)

Concannon, James P.; Barrow, Lloyd H.

2010-01-01

This is a quantitative study of 493 undergraduate engineering majors' intentions to persist in their engineering program. Using a multiple analysis of variance analysis, men and women had one common predictor for their intentions to persist, engineering career outcome expectations. However, the best sociocognitive predictor for men's persistence…

Nuclear Engineering Academic Programs Survey, 2003

International Nuclear Information System (INIS)

Science and Engineering Education, Oak Ridge Institute for Science and Education

2004-01-01

The survey includes degrees granted between September 1, 2002 and August 31, 2003. Thirty-three academic programs reported having nuclear engineering programs during the survey time period and all responded (100% response rate). Three of the programs included in last year's report were discontinued or out-of-scope in 2003. One new program has been added to the list. This year the survey data include U.S. citizenship, gender, and race/ethnicity by degree level

Broadening of nuclear engineering programs: An engineering physics approach at Rensselaer

International Nuclear Information System (INIS)

Malaviya, B.K.

1990-01-01

With the maturing of nuclear engineering as an academic discipline and the uncertainty surrounding the nuclear industry, attention is being increasingly turned to ways in which the base of traditional nuclear engineering programs in universities can be broadened to make them more attractively useful to a wider class of potential students and employers while maintaining the strengths in mainstream areas of nuclear technology. An approach that seems to provide a natural evolution combining the existing programmatic strengths, infrastructure, and resources with the trending needs of a broad segment of diversified industries is the development and initiation of an engineering physics degree program as an adjunct to an established nuclear engineering curriculum. In line with these developments, a new comprehensive academic program offering baccalaureate, master's, and doctoral degrees in engineering physics has been developed and formally instituted at Rensselaer Polytechnic Institute (RPI). It provides a valuable opportunity for students to pursue education and research that cuts across traditional disciplinary lines, leading to a wide variety of career opportunities in industry, government, national research and defense laboratories, and academia

Master of engineering program for Westinghouse Electric Corporation

International Nuclear Information System (INIS)

Klevans, E.H.; Diethorn, W.S.

1991-01-01

In August of 1985, Westinghouse Corporation, via a grant to the nuclear engineering department at Pennsylvania State University, provided its professional employees the opportunity to earn a master of engineering (M. Eng.) degree in nuclear engineering in a program of evening study in the Pittsburgh area. Faculty members from the nuclear engineering department, which is 135 miles from Westinghouse, and adjunct faculty from the professional ranks of Westinghouse provided the instruction at the Westinghouse training center facility in Monroeville, Pennsylvania, A 3-yr 30-credit program was originally planned, but this was extended to a fourth year to accommodate the actual student progress toward the degree. A fifth year was added for students to complete their engineering paper. There have been benefits to both Westinghouse and Penn State from this program. Advanced education for its employees has met a Westinghouse need. For Penn State, there has been an increase in interaction with Westinghouse personnel, and this has now led to cooperative research programs with them

Restructuring Graduate Engineering Education: The M.Eng. Program at Cornell.

Science.gov (United States)

Cady, K. Bingham; And Others

1988-01-01

Discusses the restructuring of the graduate program to accommodate emerging fields in engineering. Notes half of the graduate degrees Cornell grants each year are M.Eng. degrees. Offers 12 specialties: aerospace, agriculture, chemical, civil, electrical, mechanical and nuclear engineering; computer science, engineering physics; geological…

Negative Impact of Employment on Engineering Student Time Management, Time to Degree, and Retention: Faculty, Administrator, and Staff Perspectives

Science.gov (United States)

Tyson, Will

2012-01-01

Interviews with faculty, administrators, staff, and students at four engineering programs reveal the role of undergraduate student employment on retention and timely degree completion among engineering students. Dueling narratives reveal how student approaches to earning an engineering degree differ greatly from faculty, administrator, and staff…

EXPERIENCE AND PROSPECTS OF MASTER’S DEGREE TRAINING OF ENGINEERING STAFF IN THE FIELD OF METALLURGICAL SCIENCE

Directory of Open Access Journals (Sweden)

V. M. Konstantinov

2016-01-01

Full Text Available The experience of training for MBA in engineering and technologies for specialties “Materials Science in Mechanical Engineering” at the department was analyzed. Efficiency of the practical-focused Master’s degree program for engineering staff of the machine-building and metallurgical enterprises was emphasized. Some ways to increase efficiency of master training of engineering experts in the field of metallurgical science and heat treatment are offered. Need of more active interaction with engineering services of the production enterprise during implementation of the master thesis was proved. Need of domination of requirements of the production enterprise is highlighted in master preparation program. The algorithm of interaction of department and technical service of the production enterprise during training of the factory expert in the correspondence practical-focused Master’s degree program is offered.

Double degree master program: Optical Design

Science.gov (United States)

Bakholdin, Alexey; Kujawinska, Malgorzata; Livshits, Irina; Styk, Adam; Voznesenskaya, Anna; Ezhova, Kseniia; Ermolayeva, Elena; Ivanova, Tatiana; Romanova, Galina; Tolstoba, Nadezhda

2015-10-01

Modern tendencies of higher education require development of master programs providing achievement of learning outcomes corresponding to quickly variable job market needs. ITMO University represented by Applied and Computer Optics Department and Optical Design and Testing Laboratory jointly with Warsaw University of Technology represented by the Institute of Micromechanics and Photonics at The Faculty of Mechatronics have developed a novel international master double-degree program "Optical Design" accumulating the expertise of both universities including experienced teaching staff, educational technologies, and experimental resources. The program presents studies targeting research and professional activities in high-tech fields connected with optical and optoelectronics devices, optical engineering, numerical methods and computer technologies. This master program deals with the design of optical systems of various types, assemblies and layouts using computer modeling means; investigation of light distribution phenomena; image modeling and formation; development of optical methods for image analysis and optical metrology including optical testing, materials characterization, NDT and industrial control and monitoring. The goal of this program is training a graduate capable to solve a wide range of research and engineering tasks in optical design and metrology leading to modern manufacturing and innovation. Variability of the program structure provides its flexibility and adoption according to current job market demands and personal learning paths for each student. In addition considerable proportion of internship and research expands practical skills. Some special features of the "Optical Design" program which implements the best practices of both Universities, the challenges and lessons learnt during its realization are presented in the paper.

Where are the women? Campus climate and the degree aspirations of women in science, technology, engineering and mathematics programs

Science.gov (United States)

Schulz, Phyllis

Women remain underrepresented in science, technology, engineering, and mathematics (STEM) at all levels of higher education, which has become a concern in the competitive global marketplace. Using both quantitative and qualitative analysis, this dissertation sought to learn more about how the campus climate and self-concept influence the degree aspirations of female undergraduate students majoring in STEM programs. Using the Beginning Post-Secondary dataset, regression analyses showed that a student's initial degree aspirations, SAT scores, and interactions with faculty were all positively related to their degree aspirations three years later. Interviews with seven current STEM undergraduates confirmed the importance of interaction with faculty and suggested undergraduate research and classroom experiences also play a role in the degree aspirations of STEM students. Three of the seven students interviewed began their undergraduate educations as non-STEM majors, suggesting that the traditional STEM pipeline may no longer be the norm. These findings suggest that both future research and current practitioners should focus on undergraduate STEM classroom and research experiences. Additionally, the characteristics of students who switch into STEM majors should be explored so that we may continue to expand the number of students pursuing STEM degrees.

Joint MS Degree Program between the Korea University of Technology and Education and the University of Kansas

Science.gov (United States)

Dougherty, R. L.; Kim, Kwang Su

This paper provides an overview of the Joint MS Degree Program between Korea University of Technology and Education’ s (KUT) Mechatronics Department and Kansas University’ s (KU) Mechanical Engineering Department. Discussions were initiated in early 2005 which resulted in a formal agreement being approved by both parties in mid-2007. The Joint MS Degree Program is composed of 30 semester credit hours, equally split between the two universities, with the actual degree being awarded by the institution at which the thesis work is performed. Issues addressed during the development of this Joint MS Program included: joint versus dual degrees, institutional acceptance of the transfer of fifteen hours of credit for an MS degree, different admissions requirements and procedures for the two institutions, financial support of the students, faculty advisors at each institution, Graduate Directors at each institution, transcript acknowledgement of the Joint Degree, residency requirements, English speaking requirements/abilities, thesis publication allowances/requirements, and time zone differences for virtual meetings. These issues have been addressed, and the Joint MS Degree Program is functioning with a small number of students having taken advantage of the opportunity since the Program’ s inception. Future considerations are: growing the number of students in the Program, expansion to other Departments besides KU-Mechanical Engineering and KUTMechatronics, including other universities in the Program, expansion to a Joint PhD Degree Program, and stronger funding resources.

A comprehensive program of nuclear engineering and science education

International Nuclear Information System (INIS)

Bereznai, G.; Lewis, B.

2014-01-01

The University of Ontario Institute of Technology offers undergraduate degrees in nuclear engineering, nuclear power, health physics and radiation science, graduate degrees (masters as well as doctorate) in nuclear engineering, and graduate diplomas that encompass a wide range of nuclear engineering and technology topics. Professional development programs tailored to specific utility needs are also offered, and the sharing of course material between the professional development and university education courses has strengthened both approaches to ensuring the high qualification levels required of professionals in the nuclear industry. (author)

UAF Space Systems Engineering Program: Engaging Students through an Apprenticeship Model

Science.gov (United States)

Thorsen, D.

2017-12-01

Learning by doing has been the mantra of engineering education for decades, however, the constraints of semester length courses limits the types and size of experiences that can be offered to students. The Space Systems Engineering Program (SSEP) at the University of Alaska Fairbanks provides interdisciplinary engineering and science students with hands-on experience in all aspects of space systems engineering through a design, build, launch paradigm applied to balloon and rocket payloads and small satellites. The program is structured using an apprenticeship model such that students, freshmen through graduate, can participate in multi-year projects thereby gaining experiences appropriate to their level in college. Students enter the lab in a trainee position and receive training on lab processes and design software. Depending on the student's interests they learn how to use specific lab equipment and software design tools. Trainees provide support engineering under guidance of an upper classman. As the students' progress in their degree program and gain more expertise, they typically become part of a specific subsystem team, where they receive additional training in developing design documents and in writing requirements and test documents, and direct their efforts to meeting specific objectives. By the time the student reaches their senior year, they have acquired the leadership role for a specific subsystem and/or a general leadership role in the lab. If students stay to pursue graduate degrees, they assume the responsibility of training and mentoring other undergraduates in their areas of expertise. Throughout the program upper class students mentor the newer students. The Space Systems Engineering Program strives to reinforce a student's degree program through these large scale projects that place engineering in context.

Women Engineers: Factors and Obstacles Related to the Pursuit of a Degree in Engineering

Science.gov (United States)

Wentling, Rose Mary; Camacho, Cristina

Research on women in engineering confirms the presence of gender barriers that affect the recruitment and retention of women in engineering. These barriers stop some women from choosing engineering as a field of study, and impede some women from completing a degree in engineering. However, there are some young female students who complete their engineering education despite the presence of obstacles throughout their college years. This study addressed the factors that have hindered, motivated, and assisted women who graduated with a degree in engineering. By studying and understanding the barriers that hinder women in deciding to pursue and in completing a degree in engineering, as well as the factors that assist and encourage them, we can learn how to break down the barriers and how to facilitate the educational journey of female engineering students. This study provides valuable insights and created a framework from which high schools, universities, researchers, and female students can directly benefit.

The women in science and engineering scholars program

Science.gov (United States)

Falconer, Etta Z.; Guy, Lori Ann

1989-01-01

The Women in Science and Engineering Scholars Program provides scientifically talented women students, including those from groups underrepresented in the scientific and technical work force, with the opportunity to pursue undergraduate studies in science and engineering in the highly motivating and supportive environment of Spelman College. It also exposes students to research training at NASA Centers during the summer. The program provides an opportunity for students to increase their knowledge of career opportunities at NASA and to strengthen their motivation through exposure to NASA women scientists and engineers as role models. An extensive counseling and academic support component to maximize academic performance supplements the instructional and research components. The program is designed to increase the number of women scientists and engineers with graduate degrees, particularly those with an interest in a career with NASA.

Aerospace Technology (Aerospace Engineering Degree)

OpenAIRE

Tiseira Izaguirre, Andrés Omar; Blanco Rodríguez, David; Carreres Talens, Marcos; FAJARDO PEÑA, PABLO

2013-01-01

Apuntes de la asignatura Tecnología Aeroespacial Tiseira Izaguirre, AO.; Blanco Rodríguez, D.; Carreres Talens, M.; Fajardo Peña, P. (2013). Aerospace Technology (Aerospace Engineering Degree). Editorial Universitat Politècnica de València. http://hdl.handle.net/10251/35263

The Fessenden Honors in Engineering Program

Science.gov (United States)

Giazzoni, Michael

2018-01-01

Developing honors opportunities for students in engineering programs can be difficult, and the experience at the University of Pittsburgh is no exception. Often these students' degree requirements are so demanding that their opportunities for participating in honors experiences are severely limited. In each of the two semesters of their freshman…

Status of University of Cincinnati reactor-site nuclear engineering graduate programs

International Nuclear Information System (INIS)

Anno, J.N.; Christenson, J.M.; Eckart, L.E.

1993-01-01

The University of Cincinnati (UC) nuclear engineering program faculty has now had 12 yr of experience in delivering reactor-site educational programs to nuclear power plant technical personnel. Currently, with the sponsorship of the Toledo-Edison Company (TED), we are conducting a multiyear on-site graduate program with more than 30 participants at the Davis-Besse nuclear power plant. The program enables TED employees with the proper academic background to earn a master of science (MS) degree in nuclear engineering (mechanical engineering option). This paper presents a brief history of tile evolution of UC reactor-site educational programs together with a description of the progress of the current program

Astronautics Degrees for Space Industry

Science.gov (United States)

Gruntman, M.; Brodsky, R.; Erwin, D.; Kunc, J.

The Astronautics Program (http://astronautics.usc.edu) of the University of Southern California (USC) offers a full set of undergraduate and graduate degree programs in Aerospace Engineering with emphasis in Astronautics. The Bachelor of Science degree program in Astronautics combines basic science and engineering classes with specialized astronautics classes. The Master of Science degree program in Astronautics offers classes in various areas of space technology. The Certificate in Astronautics targets practicing engineers and scientists who enter space-related fields and/or who want to obtain training in specific space-related areas. Many specialized graduate classes are taught by adjunct faculty working at the leading space companies. The Master of Science degree and Certificate are available through the USC Distance Education Network (DEN). Today, the Internet allows us to reach students anywhere in the world through webcasting. The majority of our graduate students, as well as those pursuing the Certificate, work full time as engineers in the space industry and government research and development centers. The new world of distance learning presents new challenges and opens new opportunities. We show how the transformation of distance learning and particularly the introduction of webcasting transform organization of the program and class delivery. We will describe in detail the academic focus of the program, student reach, and structure of program components. Program development is illustrated by the student enrollment dynamics and related industrial trends; the lessons learned emphasize the importance of feedback from the students and from the space industry.

Final report to DOE: Matching Grant Program for the Penn State University Nuclear Engineering Program

International Nuclear Information System (INIS)

Jack S. Brenizer, Jr.

2003-01-01

The DOE/Industry Matching Grant Program is designed to encourage collaborative support for nuclear engineering education as well as research between the nation's nuclear industry and the U.S. Department of Energy (DOE). Despite a serious decline in student enrollments in the 1980s and 1990s, the discipline of nuclear engineering remained important to the advancement of the mission goals of DOE. The program is designed to ensure that academic programs in nuclear engineering are maintained and enhanced in universities throughout the U.S. At Penn State, the Matching Grant Program played a critical role in the survival of the Nuclear Engineering degree programs. Funds were used in a variety of ways to support both undergraduate and graduate students directly. Some of these included providing seed funding for new graduate research initiatives, funding the development of new course materials, supporting new teaching facilities, maintenance and purchase of teaching laboratory equipment, and providing undergraduate scholarships, graduate fellowships, and wage payroll positions for students

Developing Curriculum of Nuclear Civil Engineering Degree Programme at Graduate Level

International Nuclear Information System (INIS)

Iqbal, J.

2016-01-01

Full text: The paper suggests the introduction of a new degree, namely nuclear civil engineering at graduate level for better utilization of civil engineers in nuclear power plant (NPP) design and construction. At present, both nuclear engineering and civil engineering degrees are offered at undergraduate and graduate levels in numerous renowned universities of the world. However, when a civil engineer, even after completion of nuclear engineering at postgraduate level, undertakes an assignment related to NPP design, he comes across various problems which are not covered in the present curricula. For instance, NPPs’ siting issues, design of pre-stressed concrete containment against loads of loss of coolant accident (LOCA), various impulsive and impactive loads (e.g., detonations, aircraft crash analysis, etc.) and shielding calculations are some of the core issues during nuclear power plant design. The paper highlights the importance of introduction of nuclear civil engineering degree at the graduate level. Besides, the contents of the proposed course work have also been discussed. Keeping in view the fact that, currently, no such degree is offered in any university of the world, the paper explores useful avenues to human resource development for introducing and expanding nuclear power programmes. (author

Understanding the Prevalence of Geo-Like Degree Programs at Minority Serving Institutions

Science.gov (United States)

McDaris, J. R.; Manduca, C. A.; Larsen, K.

2014-12-01

Over the decade 2002-12, the percentage of students from underrepresented minorities (URM) graduating with geoscience degrees has increased by 50%. In 2012, of the nearly 6,000 geoscience Bachelor's degrees, 8% were awarded to students from URM. But that same year across all of STEM, 18% of Bachelors went to these students, and URM made up 30% of the US population overall. Minority Serving Institutions (MSIs) play an important role in increasing the diversity of geoscience graduates where there are appropriate degree programs or pathways to programs. To better understand opportunities at these institutions, the InTeGrate project collected information on degree programs at MSIs. A summer 2013 survey of websites for three types of MSIs confirmed that, while stand-alone Geology, Geoscience, or Environmental Science departments are present, there are a larger number of degree programs that include elements of geoscience or related disciplines (geography, GIS, etc.) offered in interdisciplinary departments (e.g. Natural Sciences and Math) or cognate science departments (Physics, Engineering, etc.). Approximately one-third of Hispanic Serving Institutions and Tribal Colleges and one-fifth of Historically Black Colleges and Universities offer at least one degree that includes elements of geoscience. The most common programs were Geology and Environmental Science (94 and 88 degrees respectively), but 21 other types of program were also found. To better profile the nature of these programs, 11 interviews were conducted focusing on strategies for attracting, supporting, and preparing minority students for the workforce. In conjunction with the February 2014 Broadening Access to the Earth and Environmental Sciences workshop, an additional 6 MSI profiles were obtained as well as 22 profiles from non-MSIs. Several common strategies emerge: Proactive marketing and outreach to local high schools and two-year colleges Community building, mentoring and advising, academic support

Engineering drawing field verification program. Revision 3

International Nuclear Information System (INIS)

Ulk, P.F.

1994-01-01

Safe, efficient operation of waste tank farm facilities is dependent in part upon the availability of accurate, up-to-date plant drawings. Accurate plant drawings are also required in support of facility upgrades and future engineering remediation projects. This supporting document establishes the procedure for performing a visual field verification of engineering drawings, the degree of visual observation being performed and documenting the results. A copy of the drawing attesting to the degree of visual observation will be paginated into the released Engineering Change Notice (ECN) documenting the field verification for future retrieval and reference. All waste tank farm essential and support drawings within the scope of this program will be converted from manual to computer aided drafting (CAD) drawings. A permanent reference to the field verification status will be placed along the right border of the CAD-converted drawing, referencing the revision level, at which the visual verification was performed and documented

Automotive Stirling engine development program. [fuel economy assessment

Science.gov (United States)

Kitzner, E. W.

1978-01-01

The Ford/DOE automotive Stirling engine development program is directed towards establishing the technological and developmental base that would enable a decision on whether an engineering program should be directed at Stirling engine production. The fuel economy assessment aims to achieve, with a high degree of confidence, the ERDA proposal estimate of 20.6 MPG (gasoline) for a 4500 lb 1WC Stirling engine passenger car. The current M-H fuel economy projection for the 170 HP Stirling engine is 15.7 MPG. The confidence level for this projection is 32%. A confidence level of 29% is projected for a 22.1 MPG estimate. If all of the planned analyses and test work is accomplished at the end of the one year effort, and the projected improvements are substantiated, the confidence levels would rise to 59% for the 20.6 MPG projection and 54% for the 22.1 MPG projection. Progress achieved thus far during the fuel economy assessment is discussed.

Design and Assessment of an Associate Degree-Level Plant Operations Technical Education Program

Science.gov (United States)

Selwitz, Jason Lawrence

2017-01-01

Research was undertaken to develop and evaluate an associate degree-level technical education program in Plant Operations oriented towards training students in applied science, technology, engineering, and mathematics (STEM) skills and knowledge relevant to a spectrum of processing industries. This work focuses on four aspects of the curriculum…

Mechanical Engineering | Classification | College of Engineering & Applied

Science.gov (United States)

Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Energy Doctoral Programs in Engineering Non-Degree Candidate Departments Biomedical Engineering Biomedical Engineering Industry Advisory Council Civil & Environmental Engineering Civil &

Biomedical Engineering | Classification | College of Engineering & Applied

Science.gov (United States)

Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Energy Doctoral Programs in Engineering Non-Degree Candidate Departments Biomedical Engineering Biomedical Engineering Industry Advisory Council Civil & Environmental Engineering Civil &

Electrical Engineering | Classification | College of Engineering & Applied

Science.gov (United States)

Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Energy Doctoral Programs in Engineering Non-Degree Candidate Departments Biomedical Engineering Biomedical Engineering Industry Advisory Council Civil & Environmental Engineering Civil &

Materials Science & Engineering | Classification | College of Engineering &

Science.gov (United States)

Biomedical Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Energy Doctoral Programs in Engineering Non-Degree Candidate Departments Biomedical Engineering Biomedical Engineering Industry Advisory Council Civil & Environmental Engineering Civil &

Nuclear engineering, health physics, and radioactive waste management fellowship program: Summary of program activities: Nuclear engineering and health physics fellowship, 1985-1986

International Nuclear Information System (INIS)

1986-01-01

Progress is reported in the nuclear engineering and health physics elements of the fellowship program. Statistics are given on numbers of student applications and new appointments, the degree areas of applicants, GPA and GRE score averages of the fellows, and employment of completed fellows

Astronautics degrees for the space industry

Science.gov (United States)

Gruntman, M.; Brodsky, R. F.; Erwin, D. A.; Kunc, J. A.

2004-01-01

The Astronautics Program (http://astronautics.usc.edu) of the University of Southern California (USC) offers a full set of undergraduate and graduate degree programs in Aerospace Engineering with emphasis in Astronautics. The Bachelor of Science and Master of Science degree programs in Astronautics combine basic science and engineering classes with specialized classes in space technology. The Certificate in Astronautics targets practicing engineers and scientists who enter space-related fields and/or who want to obtain training in specific space-related areas. Many specialized graduate classes are taught by adjunct faculty working at the leading space companies. The Master of Science degree and Certificate are available entirely through the USC Distance Education Network (DEN). Today, the Internet allows us to reach students anywhere in the world through webcasting. The majority of our graduate students, as well as those pursuing the Certificate, work full time as engineers in the space industry and government research and development centers while earning their degrees. The new world of distance learning presents new challenges and opens new opportunities. Distance learning, and particularly the introduction of webcasting, transform the organization of the graduate program and class delivery. We describe in detail the program's academic focus, student reach, and structure of program components. Program development is illustrated by the student enrollment dynamics and related industrial trends; the lessons learned emphasize the importance of feedback from the students and from the space industry.

The Civil Engineering Graduate Program at PUC-Rio: A Brazilian Experience.

Science.gov (United States)

Romanel, Celso; Filho, Jose Napoleao

This document discusses the graduate programs in civil engineering at the Pontifical Catholic University of Rio de Janeiro, Brazil, the oldest Brazilian private university. The report features discussions of faculty member backgrounds, trends in student enrollment, women's participation in the program, degree completion, student origins,…

A NEW Curriclum for Manufacturing & Industrial Engineering and Engineering Management for Bs and Ms Degrees

OpenAIRE

SARI, Zaki

2012-01-01

This paper deals with the design and implementation of a new curriclum for manufacturing & industrial engineering and engineering management for bachelor and master degrees at tlemcen university, algeria

2016 Milwaukee Engineering Research Conference | College of Engineering &

Science.gov (United States)

Biomedical Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Energy Doctoral Programs in Engineering Non-Degree Candidate Departments Biomedical Engineering Biomedical Engineering Industry Advisory Council Civil & Environmental Engineering Civil &

Competencies and skills for future Industrial Engineers defined in Spanish degrees

Directory of Open Access Journals (Sweden)

Cristina Santandreu-Mascarell

2011-04-01

Full Text Available Purpose: This paper has a double purpose. First, to analyze the competencies and skills proposed as ideals for an Industrial Engineering degree and identify them in the current study plans implemented in Spanish universities. Second, to check the fit between competencies and skills described in Spanish Industrial Engineering degrees and a real business environment.Design/methodology/approach: We searched information from universities through the web www.universia.es and obtained the list of all Spanish Universities, which have been filtered one by one according to their studies about Industrial Engineering degree. In addition, to compare competencies with real business world we have used results provided from the web analysis and from a previous paper in which a qualitative methodology called grounded theory was used.Findings: On one hand, we have analyzed and identified the competencies and skills proposed as ideals for an Industrial Engineering degree in the current study plans implemented in Spanish universities: competencies as multidisciplinariety and R&D are considered in all the universities, but commercial or environment are not so popular. On the other hand we have checked the fit between competencies and skills described in Spanish Industrial Engineering degrees and a real business environment. As a result, competencies as rotation, experience, company vision and corporative strategy are in all the analyzed study plans, but competencies as shared vision, free access to information and involvement of managers do not appear in new degrees, but they are required in real business.Research limitations/implications: About the origin of information, we use official web sites belonging to Spanish public and some private universities, and corresponding schools. Some universities have not updated the information about degrees in Industrial Engineering, and they still have old plans information. Moreover, the comparison we can make between the

Current Trends in Associate Degree Nursing Programs.

Science.gov (United States)

Blackstone, Elaine Grant

This study was designed to ascertain current trends in associate degree nursing programs and to discover innovative ideas and techniques which could be applied to the existing program at Miami-Dade Community College (Florida). Data was compiled from interviews with representatives of ten associate degree nursing programs in six states. Information…

Understanding the Experience of Women in Undergraduate Engineering Programs at Public Universities

Science.gov (United States)

Perez, Jessica Ohanian

2017-01-01

Women earn bachelor's degrees in engineering at a rate of less than 17% at public universities in California. The purpose of this study was to understand how women experience undergraduate engineering programs at public universities. To understand this lack of attainment, a qualitative methodology and Feminist Poststructuralist perspective were…

Recruitment Strategies Aiming to Attract Females into Undergraduate Engineering Programs: Examining Their Role and Use

Science.gov (United States)

Howenstine, Julie Anne

2013-01-01

By 2009, the percentage of women who graduated with general undergraduate degrees had increased to almost 58% of all students who completed 4-year degree programs (National Center for Education Statistics, 2009a). These percentages, however, have not been reflected in the enrollment rates of females into undergraduate engineering programs. In…

Georgia Tech video-based MS program in health physics/radiological engineering

International Nuclear Information System (INIS)

Abdel-Khalik, S.I.; Kahn, B.

1991-01-01

For the past several years, the health physics/radiation protection field has experienced a significant shortage of qualified professionals. The shortage is expected to continue for foreseeable future given the continued demand by both nuclear and medical facilities and the expected growth in the areas of waste management and environmental remediation. In response to such a shortage, beginning in the fall of 1984, Georgia Institute of Technology (Georgia Tech) established a video-based instruction program that enables professionals in the nuclear field to earn a master of science degree in health physics/radiological engineering while working at a distant nuclear facility. The admission criteria and curricular requirements for the program are identical to those for the resident (on-campus) students (except that weekly attendance at departmental seminars is excused). The program is designed for students with undergraduate degrees in health physics, engineering, or appropriate sciences such as physics, chemistry, or biology. A total of 50 quarter credit hours is required, so that a student who takes one course per quarter can complete the program in four years

Chemical Engineering Education in a Bologna Three Cycle Degree System

DEFF Research Database (Denmark)

Gani, Rafiqul

For the purpose of harmonization of European higher education, Europe’s education system has been going through major changes under what is commonly known as the ”Bologna Process”. The Bologna declaration in 1999 was the start of the introduction of a three cycle degree system in higher education...... in Europe. To date, many European universities have adopted this degree structure. The Working Party on Education (WPE) of the European Federation of Chemical Engineering (EFCE) carried out research to determine the contents of higher education in chemical engineering (ChE) and related disciplines...... such as applied chemistry and process engineering throughout Europe. The result has been a set of recommendations for the first (BS), second (MS) and third (PhD) cycle chemical engineering education aligned to the Bologna Process. They recommend that students studying towards bachelor and masters qualifications...

Progressively implementation of the new degrees at E.T.S. of Agriculture Engineering and extinction of the earlier degrees

Science.gov (United States)

Arce, A.; Caniego, J.; Vazquez, J.; Serrano, A.; Tarquis, A. M.; Cartagena, M. C.

2012-04-01

The Bologna process is to improve the quality of education, mobility, diversity and the competitiveness and involves three fundamental changes: transform of the structure of titles, changing in methods of teaching and implementation of the systems of quality assurance. Once that the new degrees have been implemented with this structure, and began at E.T.S. of Agriculture Engineering (ETSIA) at Madrid from 2010-2011 course, the main aim of this work is to deeply study the changes in teaching methodology as well as progressively implementation of the educational planning of the three new degrees: Engineering and Agronomic Graduate, Food Industry Engineering Graduate and Agro-environmental Graduate. Each one of them presents 240 ECTS with a common first course and will have access to an official Master in Agronomic Engineering. As part as an educational innovation project awarded by the Technical University of Madrid (UPM) to improve educational quality, the second course has been designed with the main objective to continue the educative model implemented last course. This model identifies several teaching activities and represents a proper teaching style at ETSIA-UPM. At the same time, a monitoring and development coordination plans have been established. On the other hand, a procedure to extinguish the earlier plans of Agriculture Engineering was also defined. Other activities related to this Project were the information improvement of the grades, in particular at High Schools centers, improving the processes of reception, counseling and tutoring and mentoring. Likewise, cooperative working workshops and programs to support the teaching of English language were implemented. Satisfaction surveys and opinion polls were done to professors and students involved in first course in order to test several aspects of this project. The students surveys were analyzed taking in account the academic results and their participation in mentoring activities giving a highly

Chemistry teaching in the new degrees of Agricultural Engineering

Science.gov (United States)

Arce, Augusto; Tarquis, Ana Maria; Castellanos, Maria Teresa; Requejo, Maria Isabel; Cartagena, Maria Carmen

2013-04-01

The academic year 2011-12 is the second one implementing Bologna process in ETSI at the subjects of Agricultural Chemistry I and Chemistry II in the new four Degrees: Graduate in Engineering and Agricultural Science, Food Engineering Graduate, Graduate Environmental and engineering Graduate in Biotechnology, for it has been necessary to design and implement new interactive methodologies in the teaching-learning process based on the use of the virtual platform of the UPM, implement new evaluation systems that promote continued participation active student and the development of educational materials to support the subjects of chemistry designed new degrees within the EEES. In addition to the above actions, an assessment test prior chemistry knowledge has been made to all students who enter into Agricultural Grades, improving laboratory practices and the comparative study of academic obtained by the students of the new grades in the subjects of chemistry during the year 2011-12 compared to the 2010-11 academic year. More than 15,000 data have showed a good correlation between the student's prior knowledge, the level test performed, test scores, the overall success rate of the course and the abandonment of the different degrees. Academic results show a higher percentage of students enrolled and presented on a greater number of passes on students enrolled in the 2011-12 academic year for students enrolled in the previous academic year. The improved results have influenced the actions taken and the level of knowledge with students entering. Finally, we propose possible solutions to fix these results in future courses, aiming to improve the degree of efficiency, success and significant absenteeism in the first year as it will condition the dropout rate of these new degrees. Acknowledgements: Proyecto de Innovación Educativa N° IE02054-11/12 UPM. 2012.

Brief 75 Health Physics Enrollments and Degrees Survey, 2014 Data

Energy Technology Data Exchange (ETDEWEB)

None, None

2015-03-05

The 2014 survey includes degrees granted between September 1, 2013 and August 31, 2014. Enrollment information refers to the fall term 2014. Twenty-two academic programs were included in the survey universe, with all 22 programs providing data. Since 2009, data for two health physics programs located in engineering departments are also included in the nuclear engineering survey. The enrollments and degrees data includes students majoring in health physics or in an option program equivalent to a major.

Competence Centered Specialization in Web Engineering Topics in a Software Engineering Masters Degree Programme

DEFF Research Database (Denmark)

Dolog, Peter; Thomsen, Lone Leth; Thomsen, Bent

2010-01-01

Web applications and Web-based systems are becoming increasingly complex as a result of either customer requests or technology evolution which has eased other aspects of software engineering. Therefore, there is an increasing demand for highly skilled software engineers able to build and also...... advance the systems on the one hand as well as professionals who are able to evaluate their eectiveness on the other hand. With this idea in mind, the computer science department at Aalborg University is continuously working on improvements in its specialization in web engineering topics as well...... as on general competence based web engineering proles oered also for those who specialize in other areas of software engineering. We describe the current state of the art and our experience with a web engineering curriculum within the software engineering masters degree programme. We also discuss an evolution...

Visual study of capabilities of managing IC engine filling degree vs engine ecological indicators

Science.gov (United States)

Kołodziej, Szymon; Ligus, Grzegorz

2017-10-01

The operation of an internal combustion engine in a transient state is related to constant changes in cylinder filling degree. Managing a steady course of engine torque demands constant corrections in the volume of air delivered to the engine. In this work, different engine throttle management strategies were analyzed. The effect of throttle velocity on emissions was depicted. The research has shown that the greatest value of work density is reached by the IC engine for relatively low values of throttle angle. For shown values, disturbances in air flow in engine intake which may adversely affect emissions due to uneven cylinder filling were researched with the use of Digital Particle Image Velocimetry. The conducted research has shown significant unevennes in air supply to individual cylinders in the engine. This effect may cause discrepancies in air excess ratio for each cylinder, and result in heightened harmful substance emission.

An integrator final exam at the end of the engineering degrees to evaluate the acquired competences

Science.gov (United States)

Perdigones, A.; Sánchez, E.; Valiño, V.; Tarquis, A. M.

2010-05-01

In the last decade strong changes in the design of university degrees have occurred in Spain, affecting real competences acquired by graduates. The new degrees often provide students greater freedom in shaping their curriculum which results in many cases in a problem for their training. In engineering degrees of Spain, the final project, that allows to know the integrated skills of the students in engineering subjects, is not compulsory anymore; it can be substituted for other specific types of work that often do not involve skills valued by the companies of the industrial sector. This situation may create doubts about the real competences of the graduates. In the present study, a final exam (voluntary) has been carried out during three years to assess competences in engineering students in the last course of the degree in agricultural engineering (diploma of five years) and agricultural technical engineering (diploma of three years) at the Polytechnic University of Madrid (Spain). They took part 132 students in the years 2006, 2007 and 2008. The exam had a common format, with three parts assessing skills in construction, machinery and electrical installations. The results showed the evolution in the training of students, and the relationship between skills acquired and late differences in the learning process. The most important conclusions were that the attainment levels was lower than expected, but generally consistent with the training received by each group of students. In particular, the low number of hours of subjects in electrical installations in certain groups of students was evident when evaluating the skills acquired. The results indicated that they aim to increase the number of hours in certain subjects and groups of students, if a graduate is to get qualified. The authors recommend an examination similar to the raised, integrator type, in all programs that do not have any overall final assessment in order to conduct a quality control of graduates

Quiet engine program flight engine design study

Science.gov (United States)

Klapproth, J. F.; Neitzel, R. E.; Seeley, C. T.

1974-01-01

The results are presented of a preliminary flight engine design study based on the Quiet Engine Program high-bypass, low-noise turbofan engines. Engine configurations, weight, noise characteristics, and performance over a range of flight conditions typical of a subsonic transport aircraft were considered. High and low tip speed engines in various acoustically treated nacelle configurations were included.

College of Engineering & Applied Science

Science.gov (United States)

Computational Mechanics Laboratory Environmental Engineering Laboratory Geotechnical Engineering Laboratory Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Energy Doctoral Programs in Engineering Non-Degree Candidate Departments Biomedical Engineering

Joint Degree Program: the Perspective of Employers

Directory of Open Access Journals (Sweden)

Tatjana Bilevičienė

2013-08-01

Full Text Available Purpose — the purpose of this article is to extend discussion towards the need and importance of joint degree programs in modern universities, introducing the perspective of the employers toward this question. Design/methodology/approach — the research was conducted to analyze the demand of joint degree programs from the perspective of employers, identify weak and strong aspects, opinion and demand for graduates of such programs. To achieve this purpose, a combination of theoretical and empirical methods was chosen: document analysis (previous studies, statistics was conducted and an online qualitative survey was organized. Findings — The analysis of articles, studies and statistics points out the challenges and threats faced by universities nowadays, forcing higher education institutions to find new ways to raise the quality of studies and raise the interest of employers to choose graduates from MRU, as well as the satisfaction of employers with their choice of employees. Theoretical analysis pointed out these challenges and requirements for the modern employee, summarised the challenges in preparation of IT field specialists. The conducted research results showed that the diploma of joint degree programs would not be treated as an advantage of possible employee from the perspective of employers in case some important aspects will not be taken into consideration by program creators. On the other hand, undeniably there are strong sides, such as knowledge in the fields of foreign language, international experience, innovativeness and creativeness of employees that would be treated as an advantage in the process of selection for positions of any technical support related positions. Research limitations/implications — employers, whose business activities are closely related to information technology, have been invited as experts. In addition, these experts have a good understanding of the specifics of joint degree programs. The received

"I Don't Want to Be an Almost Engineer": Women's Voices of Persistence in Undergraduate Engineering Degrees

Science.gov (United States)

Yates, Heather N.

2012-01-01

This narrative qualitative study focused on the experiences of four women pursuing undergraduate engineering degrees and how the experiences affect their self-efficacy and in turn persistence in the degree. The use of narrative methodologies allowed the addition of the voice of the women engineering students to the study providing a more robust…

Remote sensing programs and courses in engineering and water resources

Science.gov (United States)

Kiefer, R. W.

1981-01-01

The content of typical basic and advanced remote sensing and image interpretation courses are described and typical remote sensing graduate programs of study in civil engineering and in interdisciplinary environmental remote sensing and water resources management programs are outlined. Ideally, graduate programs with an emphasis on remote sensing and image interpretation should be built around a core of five courses: (1) a basic course in fundamentals of remote sensing upon which the more specialized advanced remote sensing courses can build; (2) a course dealing with visual image interpretation; (3) a course dealing with quantitative (computer-based) image interpretation; (4) a basic photogrammetry course; and (5) a basic surveying course. These five courses comprise up to one-half of the course work required for the M.S. degree. The nature of other course work and thesis requirements vary greatly, depending on the department in which the degree is being awarded.

Heavy Truck Engine Program

Energy Technology Data Exchange (ETDEWEB)

Nelson, Christopher

2009-01-08

The Heavy Duty Truck Engine Program at Cummins embodied three significant development phases. All phases of work strove to demonstrate a high level of diesel engine efficiency in the face of increasingly stringent emission requirements. Concurrently, aftertreatment system development and refinement was pursued in support of these efficiency demonstrations. The program's first phase focused on the demonstration in-vehicle of a high level of heavy duty diesel engine efficiency (45% Brake Thermal Efficiency) at a typical cruise condition while achieving composite emissions results which met the 2004 U.S. EPA legislated standards. With a combination of engine combustion calibration tuning and the development and application of Urea-based SCR and particulate aftertreatment, these demonstrations were successfully performed by Q4 of 2002. The second phase of the program directed efforts towards an in-vehicle demonstration of an engine system capable of meeting 2007 U.S. EPA legislated emissions requirements while achieving 45% Brake Thermal Efficiency at cruise conditions. Through further combustion optimization, the refinement of Cummins Cooled EGR architecture, the application of a high pressure common rail fuel system and the incorporation of optimized engine parasitics, Cummins Inc. successfully demonstrated these deliverables in Q2 of 2004. The program's final phase set a stretch goal of demonstrating 50% Brake Thermal Efficiency from a heavy duty diesel engine system capable of meeting 2010 U.S. EPA legislated emissions requirements. Cummins chose to pursue this goal through further combustion development and refinement of the Cooled EGR system architecture and also applied a Rankine cycle Waste Heat Recovery technique to convert otherwise wasted thermal energy to useful power. The engine and heat recovery system was demonstrated to achieve 50% Brake Thermal Efficiency while operating at a torque peak condition in second quarter, 2006. The 50% efficient

Advancing Systems Engineering Excellence: The Marshall Systems Engineering Leadership Development Program

Science.gov (United States)

Hall, Philip; Whitfield, Susan

2011-01-01

As NASA undertakes increasingly complex projects, the need for expert systems engineers and leaders in systems engineering is becoming more pronounced. As a result of this issue, the Agency has undertaken an initiative to develop more systems engineering leaders through its Systems Engineering Leadership Development Program; however, the NASA Office of the Chief Engineer has also called on the field Centers to develop mechanisms to strengthen their expertise in systems engineering locally. In response to this call, Marshall Space Flight Center (MSFC) has developed a comprehensive development program for aspiring systems engineers and systems engineering leaders. This presentation will summarize the two-level program, which consists of a combination of training courses and on-the-job, developmental training assignments at the Center to help develop stronger expertise in systems engineering and technical leadership. In addition, it will focus on the success the program has had in its pilot year. The program hosted a formal kickoff event for Level I on October 13, 2009. The first class includes 42 participants from across MSFC and Michoud Assembly Facility (MAF). A formal call for Level II is forthcoming. With the new Agency focus on research and development of new technologies, having a strong pool of well-trained systems engineers is becoming increasingly more critical. Programs such as the Marshall Systems Engineering Leadership Development Program, as well as those developed at other Centers, help ensure that there is an upcoming generation of trained systems engineers and systems engineering leaders to meet future design challenges.

Engineering success: Undergraduate Latina women's persistence in an undergradute engineering program

Science.gov (United States)

Rosbottom, Steven R.

The purpose and focus of this narrative inquiry case study were to explore the personal stories of four undergraduate Latina students who persist in their engineering programs. This study was guided by two overarching research questions: a) What are the lived experiences of undergraduate Latina engineering students? b) What are the contributing factors that influence undergraduate Latina students to persist in an undergraduate engineering program? Yosso's (2005) community cultural wealth was used to the analyze data. Findings suggest through Yosso's (2005) aspirational capital, familial capital, social capital, navigational capital, and resistant capital the Latina student persisted in their engineering programs. These contributing factors brought to light five themes that emerged, the discovery of academic passions, guidance and support of family and teachers, preparation for and commitment to persistence, the power of community and collective engagement, and commitment to helping others. The themes supported their persistence in their engineering programs. Thus, this study informs policies, practices, and programs that support undergraduate Latina engineering student's persistence in engineering programs.

Toward the Ideal Professional Master's Degree Program.

Science.gov (United States)

Russell, Maria P.

1999-01-01

Outlines work accomplished at the 1998 National Communication Association Summer Conference, presenting a model for a professional master's-degree program in public relations that integrates outcomes, assessment, curriculum, and pedagogy. Outlines program outcomes, curriculum, essential curriculum-content areas, pedagogical approaches, and…

What Is the Tech Prep/Associate Degree Program?

Science.gov (United States)

Parnell, Dale

1993-01-01

Discusses the nature, importance, and future of the Tech Prep/Associate Degree program. Suggests that these programs must move beyond simple articulation and become aggressive in jointly examining, developing, and sustaining high quality educational programs. (JOW)

Collaboration for cooperative work experience programs in biomedical engineering education.

Science.gov (United States)

Krishnan, Shankar

2010-01-01

Incorporating cooperative education modules as a segment of the undergraduate educational program is aimed to assist students in gaining real-life experience in the field of their choice. The cooperative work modules facilitate the students in exploring different realistic aspects of work processes in the field. The track records for cooperative learning modules are very positive. However, it is indeed a challenge for the faculty developing Biomedical Engineering (BME) curriculum to include cooperative work experience or internship requirements coupled with a heavy course load through the entire program. The objective of the present work is to develop a scheme for collaborative co-op work experience for the undergraduate training in the fast-growing BME programs. A few co-op/internship models are developed for the students pursuing undergraduate BME degree. The salient features of one co-op model are described. The results obtained support the proposed scheme. In conclusion, the cooperative work experience will be an invaluable segment in biomedical engineering education and an appropriate model has to be selected to blend with the overall training program.

Postgraduate education in nuclear engineering: towards an european degree

International Nuclear Information System (INIS)

Giot, M.

2000-01-01

This paper presents the postgraduate degree in nuclear engineering jointly organised by four universities of the French Community of Belgium, and its possible evolution towards an European degree. The project includes the location of the programme outside the partner universities at the premises of the SCK.CEN, a modular structure of the curriculum, and an increased co-operation of the teaching staff within small groups of experts including academics, researchers and practitioners from the nuclear industry. This programme would favour the exchange of students and professors through a network of top quality European institutions pursuing the same teaching objectives. (author)

Establishing a framework for a physician assistant/bioethics dual degree program.

Science.gov (United States)

Carr, Mark F; Bergman, Brett A

2014-01-01

: Numerous medical schools currently offer a master of arts (MA) in bioethics dual degree for physicians. A degree in bioethics enhances the care physicians provide to patients and prepares physicians to serve on ethics committees and consult services. Additionally, they may work on institutional and public policy issues related to ethics. Several physician assistant (PA) programs currently offer a master of public health (MPH) dual degree for PAs. A degree in public health prepares PAs for leadership roles in meeting community health needs. With the success of PA/MPH dual degree programs, we argue here that a PA/bioethics dual degree would be another opportunity to advance the PA profession and consider how such a program might be implemented. The article includes the individual perspectives of the authors, one of whom completed a graduate-level certificate in bioethics concurrently with his 2-year PA program, while the other served as a bioethics program director.

Electric Utility Transmission and Distribution Line Engineering Program

Energy Technology Data Exchange (ETDEWEB)

Peter McKenny

2010-08-31

Economic development in the United States depends on a reliable and affordable power supply. The nation will need well educated engineers to design a modern, safe, secure, and reliable power grid for our future needs. An anticipated shortage of qualified engineers has caused considerable concern in many professional circles, and various steps are being taken nationwide to alleviate the potential shortage and ensure the North American power system's reliability, and our world-wide economic competitiveness. To help provide a well-educated and trained workforce which can sustain and modernize the nation's power grid, Gonzaga University's School of Engineering and Applied Science has established a five-course (15-credit hour) Certificate Program in Transmission and Distribution (T&D) Engineering. The program has been specifically designed to provide working utility engineering professionals with on-line access to advanced engineering courses which cover modern design practice with an industry-focused theoretical foundation. A total of twelve courses have been developed to-date and students may select any five in their area of interest for the T&D Certificate. As each course is developed and taught by a team of experienced engineers (from public and private utilities, consultants, and industry suppliers), students are provided a unique opportunity to interact directly with different industry experts over the eight weeks of each course. Course material incorporates advanced aspects of civil, electrical, and mechanical engineering disciplines that apply to power system design and are appropriate for graduate engineers. As such, target students for the certificate program include: (1) recent graduates with a Bachelor of Science Degree in an engineering field (civil, mechanical, electrical, etc.); (2) senior engineers moving from other fields to the utility industry (i.e. paper industry to utility engineering or project management positions); and (3) regular

Marketing and Retention Strategies for Adult Degree Programs

Science.gov (United States)

Brown, Joann A.

2004-01-01

Four marketing strategies are critical to the success of adult degree programs: integrating marketing, knowing your students (research), shaping programs and services for adults, and staying the course (retention).

Design and Assessment of an Associate Degree-Level Plant Operations Technical Education Program

Science.gov (United States)

Selwitz, Jason Lawrence

Research was undertaken to develop and evaluate an associate degree-level technical education program in Plant Operations oriented towards training students in applied science, technology, engineering, and mathematics (STEM) skills and knowledge relevant to a spectrum of processing industries. This work focuses on four aspects of the curriculum and course development and evaluation research. First, the context of, and impetus for, what was formerly called vocational education, now referred to as technical or workforce education, is provided. Second, the research that was undertaken to design and evaluate an associate degree-level STEM workforce education program is described. Third, the adaptation of a student self-assessment of learning gains instrument is reviewed, and an analysis of the resulting data using an adapted logic model is provided, to evaluate the extent to which instructional approaches, in two process control/improvement-focused courses, were effective in meeting course-level intended learning outcomes. Finally, eight integrative multiscale exercises were designed from two example process systems, wastewater treatment and fast pyrolysis. The integrative exercises are intended for use as tools to accelerate the formation of an operator-technician's multiscale vision of systems, unit operations, underlying processes, and fundamental reactions relevant to multiple industries. Community and technical colleges serve a vital function in STEM education by training workers for medium- and high-skilled technical careers and providing employers the labor necessary to operate and maintain thriving business ventures. Through development of the curricular, course, and assessment-related instruments and tools, this research helps ensure associate degree-level technical education programs can engage in a continual process of program evaluation and improvement.

Career Fairs | College of Engineering & Applied Science

Science.gov (United States)

Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Energy Doctoral Programs in Engineering Non-Degree Candidate Departments Biomedical Engineering Biomedical Engineering Industry Advisory Council Civil & Environmental Engineering Civil &

The Stock of Science and Engineering Master's Degree-Holders in the United States. Special Report.

Science.gov (United States)

Dumas, Neil S.; And Others

Statistical information dealing with the employment of scientists and engineers with master's degrees is provided within this report. Findings are summarized of a research effort aimed at developing estimates of the size of the population with master's degrees in science and engineering fields by sex and field for the period 1960-1978. Also…

Maintaining quality control in a nontraditional nuclear technology degree program

International Nuclear Information System (INIS)

DeSain, G.W.

1989-01-01

Regents College, created by the Board of Regents of the University of The State on New York in 1971, has been offering, since January 1985, AS and BS degrees in nuclear technology. The impetus for establishing the nuclear technology degrees came from nuclear utility management and had to do with the US Nuclear Regulatory Commission proposed rule regarding degreed operators on shift. There are a variety of ways to earn credits in Regents College degree programs: (1) college courses taken for degree-level credit from regionally accredited colleges; (2) courses sponsored by business, industry, or government that have been evaluated and recommended for credit by the New York National or American Council on Education (ACE's) Program on Noncollegiate Sponsored Instruction (PONSI); (3) military education that has been evaluated by ACE PONSI; (4) approved college-proficiency examinations; and (5) special assessment: an individualized examination of college-level knowledge gained from experience or independent study. Nuclear technology students primarily use college course work, evaluated military education, and proficiency examinations to complete degree programs. However, an increasing number of utilities are having training programs PONSI evaluated, resulting in an increased use of these courses in the nuclear technology degrees. Quality control is a function of several factors described in the paper

Relevance Evaluation of a Master's Degree in Engineering in Peru

OpenAIRE

Miñán Ubillús, Erick Alexander; Díaz Puente, José

2012-01-01

A good engineering education has a direct impact on competitiveness and the development of a country. In the context of the increase and diversification of higher education, it is necessary to ensure not only the quality, but also the relevance of master?s programs in engineering; that is, to say the appropriateness of objectives and results to the needs and interests (national and regional) of program beneficiaries. After a literature review and interviews with experts, one should propose a ...

The MetSkill Program — Rapidly Developing Effective Young Engineers in the Workplace

Science.gov (United States)

Drinkwater, Diana; Bianco, Nina

MetSkill is a professional development program for metallurgical engineers that integrates with normal duties in their first one or two years of service. Graduates work together on a structured technical project, facilitated by specialists and supported by formal learning, and ultimately reported to their technical managers. The program enables graduates to "fill the gaps" in their undergraduate education, which is increasingly pertinent as engineering degrees become more general. Participants report that they enjoy the focus on more challenging (rewarding) aspects of their jobs and feel more confident about problem solving. Sponsor companies add that the relationships developed with external technical specialists enhances opportunities for innovation and development. MetSkill was delivered to two major resource companies in Australia in 2012. This paper provides an outline of the program and the reasons for its success, and demonstrates how the learning model could be applied to groups of graduates in other engineering disciplines.

Strategies for Teaching Professional Ethics to IT Engineering Degree Students and Evaluating the Result.

Science.gov (United States)

Miñano, Rafael; Uruburu, Ángel; Moreno-Romero, Ana; Pérez-López, Diego

2017-02-01

This paper presents an experience in developing professional ethics by an approach that integrates knowledge, teaching methodologies and assessment coherently. It has been implemented for students in both the Software Engineering and Computer Engineering degree programs of the Technical University of Madrid, in which professional ethics is studied as a part of a required course. Our contribution of this paper is a model for formative assessment that clarifies the learning goals, enhances the results, simplifies the scoring and can be replicated in other contexts. A quasi-experimental study that involves many of the students of the required course has been developed. To test the effectiveness of the teaching process, the analysis of ethical dilemmas and the use of deontological codes have been integrated, and a scoring rubric has been designed. Currently, this model is also being used to develop skills related to social responsibility and sustainability for undergraduate and postgraduate students of diverse academic context.

Repository-Based Software Engineering Program: Working Program Management Plan

Science.gov (United States)

1993-01-01

Repository-Based Software Engineering Program (RBSE) is a National Aeronautics and Space Administration (NASA) sponsored program dedicated to introducing and supporting common, effective approaches to software engineering practices. The process of conceiving, designing, building, and maintaining software systems by using existing software assets that are stored in a specialized operational reuse library or repository, accessible to system designers, is the foundation of the program. In addition to operating a software repository, RBSE promotes (1) software engineering technology transfer, (2) academic and instructional support of reuse programs, (3) the use of common software engineering standards and practices, (4) software reuse technology research, and (5) interoperability between reuse libraries. This Program Management Plan (PMP) is intended to communicate program goals and objectives, describe major work areas, and define a management report and control process. This process will assist the Program Manager, University of Houston at Clear Lake (UHCL) in tracking work progress and describing major program activities to NASA management. The goal of this PMP is to make managing the RBSE program a relatively easy process that improves the work of all team members. The PMP describes work areas addressed and work efforts being accomplished by the program; however, it is not intended as a complete description of the program. Its focus is on providing management tools and management processes for monitoring, evaluating, and administering the program; and it includes schedules for charting milestones and deliveries of program products. The PMP was developed by soliciting and obtaining guidance from appropriate program participants, analyzing program management guidance, and reviewing related program management documents.

Research Labs | College of Engineering & Applied Science

Science.gov (United States)

Engineering Multimedia Software Laboratory Computer Science Nanotechnology for Sustainable Energy and Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Energy Doctoral Programs in Engineering Non-Degree Candidate Departments Biomedical Engineering

The Maryland nuclear science baccalaureate degree program: The utility perspective

International Nuclear Information System (INIS)

Mueller, J.R.

1989-01-01

In the early 1980s, Wisconsin Public Service Corporation (WPSC) made a firm commitment to pursue development and subsequent delivery of an appropriate, academically accredited program leading to a baccalaureate degree in nuclear science for its nuclear operations personnel. Recognizing the formidable tasks to be accomplished, WPSC worked closely with the University of Maryland University College (UMUC) in curriculum definition, specific courseware development for delivery by computer-aided instruction, individual student evaluation, and overall program implementation. Instruction began on our nuclear plant site in the fall of 1984. The university anticipates conferring the first degrees from this program at WPSC in the fall of 1989. There are several notable results that WPSC achieved from this degree program. First and most importantly, an increase in the level of education of our employees. It should be stated that this program has been well received by WPSC operator personnel. These employees, now armed with plant experience, a formal degree in nuclear science, and professional education in management are real candidates for advancement in our nuclear organization

Introducing Ethical, Social and Environmental Issues in ICT Engineering Degrees

Science.gov (United States)

Miñano, Rafael; Aller, Celia Fernández; Anguera, Áurea; Portillo, Eloy

2015-01-01

This paper describes the experience of introducing ethical, social and environmental issues in undergraduate ICT engineering degrees at the Universidad Politécnica de Madrid. The experience before the Bologna Process was concentrated on developing elective courses related mainly on the field of the International Development Cooperation. The…

An Engineering Degree Does Not (Necessarily) an Engineer Make: Career Decision Making among Undergraduate Engineering Majors. Research Brief

Science.gov (United States)

Lichtenstein, Gary; Loshbaugh, Heidi G.; Claar, Brittany; Chen, Helen L.; Jackson, Kristyn; Sheppard, Sheri

2009-01-01

This paper explores the career-related decision making of seniors enrolled in undergraduate engineering programs at two nationally recognized institutions. This strand of the Academic Pathways Study (APS) research revealed that many engineering students were undecided about their career plans, even late into their senior years and that many were…

Proposed Accreditation Standards for Degree-Granting Correspondence Programs Offered by Accredited Institutions.

Science.gov (United States)

McGraw-Hill Continuing Education Center, Washington, DC.

A study on proposed accreditation standards grew out of a need to (1) stimulate the growth of quality correspondence degree programs; and (2) provide a policy for accreditation of correspondence degree programs so that graduates would be encouraged to pursue advanced degree programs offered elsewhere by educational institutions. The study focused…

EnQuest | College of Engineering & Applied Science

Science.gov (United States)

engineering camp, in which high school girls explore careers in engineering. It is held at the University of Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Energy Doctoral Programs in Engineering Non-Degree Candidate Departments Biomedical Engineering

Student satisfaction and academic performance in a dual PharmD/MBA degree program.

Science.gov (United States)

Chumney, Elinor C G; Ragucci, Kelly R

2006-04-15

Evaluate the academic experience and satisfaction of students enrolled in the dual PharmD/MBA degree program between the South Carolina College of Pharmacy and The Citadel's School of Business Administration. Compare grade point averages of students enrolled in the dual degree program with those of traditional student colleagues. A standardized satisfaction survey instrument was administered to 32 students currently enrolled in the dual PharmD/MBA degree program. Grade point averages (GPAs) in both pharmacy and business coursework were also collected for analysis. There were slightly higher percentages of both female and minority students in the dual degree program compared to the pharmacy class as a whole. Eighteen (56%) of students completed the survey, and responses were generally positive. The mean GPA of students in the dual degree program was higher than that of both pharmacy (3.37 vs 3.08, p vs 3.64, not statistically significant) students not enrolled in the dual degree program. Students enrolled in the dual degree program did better academically than their counterparts and indicated an overall high level of satisfaction with the program.

Career Services | College of Engineering & Applied Science

Science.gov (United States)

@ 10:00 am - 2:00 pm Wisconsin Room, UWM Student Union Register today! Engineering Careers Careers in Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Energy Doctoral Programs in Engineering Non-Degree Candidate Departments Biomedical Engineering

Nontraditional Degree Options for Nurses: A Model Program

Science.gov (United States)

Walston, Sydney C.

1978-01-01

The Institute for Personal and Career Development of Central Michigan University offers external degree programs for adult learners using nontraditional study. The competency-based programs described include credit given for the educational background and relevant career-life experiences of registered nurses in Michigan. (Author/LBH)

Enterpreneurship/Small Business Degree Programs at Community Colleges

Science.gov (United States)

Maidment, Fred

2007-01-01

Associate degree programs at community colleges in small business/entrepreneurship were examined in this article. The study examined the community college programs in entrepreneurship and small business related, small business administration and entrepreneurship listed in "Perterson's Guide to Two-Year Colleges" (Oram, 2005). Current catalogs…

Colleges and Universities with Degree or Certificate Bearing Programs in Creativity

Science.gov (United States)

Yudess, Jo

2010-01-01

In this article, the author presents a list of colleges and universities with degree or certificate bearing programs in creativity. Since this focuses only on degree bearing programs, an individual might also focus on creativity by working with a specific faculty member in a more general program such as industrial-organizational psychology or…

Linking Engineering and Medical Training: A USC program seeks to introduce medical and engineering students to medical device development.

Science.gov (United States)

Tolomiczenko, George; Sanger, Terry

2015-01-01

Medical students are attracted by the prospect of a meaningful addition to their clinical work. Engineering students are excited by a unique opportunity to learn directly alongside their medical student peers. For both, as well as the scientific community at large, the boutique program at the University of Southern California (USC) linking engineering and medical training at the graduate level is instructive of a new way of approaching engineering education that can potentially provide benefits to both students and society. Students who have grown up in an era of ?mass customization? in the retail and service industries can enjoy that same degree of flexibility also in the realm of education. At the same time, society gains engineers who have developed an increased empathy and awareness of the clinical contexts in which their innovations will be implemented.

Automotive Stirling Engine Development Program

Science.gov (United States)

Nightingale, N.; Ernst, W.; Richey, A.; Simetkosky, M.; Smith, G.; Antonelli, M. (Editor)

1983-01-01

Mod I engine testing and test results, the test of a Mod I engine in the United States, Mod I engine characterization and analysis, Mod I Transient Test Bed fuel economy, Mod I-A engine performance are discussed. Stirling engine reference engine manufacturing and reduced size studies, components and subsystems, and the study and test of low-cost casting alloys are also covered. The overall program philosophy is outlined, and data and results are presented.

Programming Google App Engine

CERN Document Server

Sanderson, Dan

2010-01-01

As one of today's cloud computing services, Google App Engine does more than provide access to a large system of servers. It also offers you a simple model for building applications that scale automatically to accommodate millions of users. With Programming Google App Engine, you'll get expert practical guidance that will help you make the best use of this powerful platform. Google engineer Dan Sanderson shows you how to design your applications for scalability, including ways to perform common development tasks using App Engine's APIs and scalable services. You'll learn about App Engine's a

Stirling engine application study

Science.gov (United States)

Teagan, W. P.; Cunningham, D.

1983-01-01

A range of potential applications for Stirling engines in the power range from 0.5 to 5000 hp is surveyed. Over one hundred such engine applications are grouped into a small number of classes (10), with the application in each class having a high degree of commonality in technical performance and cost requirements. A review of conventional engines (usually spark ignition or Diesel) was then undertaken to determine the degree to which commercial engine practice now serves the needs of the application classes and to detemine the nature of the competition faced by a new engine system. In each application class the Stirling engine was compared to the conventional engines, assuming that objectives of ongoing Stirling engine development programs are met. This ranking process indicated that Stirling engines showed potential for use in all application classes except very light duty applications (lawn mowers, etc.). However, this potential is contingent on demonstrating much greater operating life and reliability than has been demonstrated to date by developmental Stirling engine systems. This implies that future program initiatives in developing Stirling engine systems should give more emphasis to life and reliability issues than has been the case in ongoing programs.

The Maryland nuclear science baccalaureate degree program: The university perspective

International Nuclear Information System (INIS)

Janke, T.A.

1989-01-01

Nuclear utilities' efforts in response to industry-wide pressures to provide operations staff with degree opportunities have encountered formidable barriers. This paper describes, from the university's perspective, the development and operation of the University of Maryland University College (UMUC) special baccalaureate program in nuclear science. This program has successfully overcome these problems to provide degree education on-site, on-line, and on time. Program delivery began in 1984 with one utility and a single site. It is currently delivered at eight sites under contract to six utilities with a total active student count of over 500. The first graduates are expected in 1989. The program is an accredited university program and enjoys licensure approval from the six states within which it operates. In addition to meeting US Nuclear Regulatory Commission proposed guidelines for degreed operators, the program increasingly appears as part of utility management development programs for all plant personnel and a factor in employee retention. The owner utilities, the University of Maryland, and the growing user's group are committed to the academic integrity, technical capability, and responsiveness of the program. The full support of this partnership speaks well for the long-term service of the Bachelor of Science in Nuclear Science program to the nuclear power industry

The Impact of Software on Associate Degree Programs in Electronic Engineering Technology.

Science.gov (United States)

Hata, David M.

1986-01-01

Assesses the range and extent of computer assisted instruction software available in electronic engineering technology education. Examines the need for software skills in four areas: (1) high-level languages; (2) assembly language; (3) computer-aided engineering; and (4) computer-aided instruction. Outlines strategies for the future in three…

ABET [Accreditation Board for Engineering and Technology] accreditation for engineering technology

International Nuclear Information System (INIS)

Foulke, L.R.

1989-01-01

Engineering technology is that part of the technological field that requires the application of scientific and engineering knowledge and methods combined with technical skills in support of engineering activities. It lies in the occupational spectrum between the craftsman and the engineer at the end of the spectrum closest to the engineer. The term engineering technician is applied to the graduates of associate degree programs. Graduates of baccalaureate programs are called engineering technologists. The content of a 4-yr engineering technology program treats the same subject areas as does an engineering program but with more emphasis on application, use of established design concepts, and the laboratory experience rather than on science, conceptual design, and new development. The mathematics content of accreditable baccalaureate programs must contain at least 12 semester-hour credits of mathematics including the study of calculus. Engineering managers should take a hard look at what is really needed in the education of that majority of a personnel who do not work as design and development engineers. Graduates of engineering technology programs may be better qualified than those of some engineering programs for the majority of jobs in our industry today

Accreditation of nuclear engineering programs

International Nuclear Information System (INIS)

Williamson, T.G.

1989-01-01

The American Nuclear Society (ANS) Professional Development and Accreditation Committee (PDAC) has the responsibility for accreditation of engineering and technology programs for nuclear and similarly named programs. This committee provides society liaison with the Accreditation Board for Engineering and Technology (ABET), is responsible for the appointment and training of accreditation visitors, nomination of members for the ABET Board and Accreditation Commissions, and review of the criteria for accreditation of nuclear-related programs. The committee is composed of 21 members representing academia and industry. The ABET consists of 19 participating bodies, primarily professional societies, and 4 affiliate bodies. Representation on ABET is determined by the size of the professional society and the number of programs accredited. The ANS, as a participating body, has one member on the ABET board, two members on the Engineering Accreditation Commission, and one on the Technology Accreditation Commission. The ABET board sets ABET policy and the commissions are responsible for accreditation visits

The future in Agricultural Engineering: news degrees in the Universidad Politécnica de Madrid (UPM)

Science.gov (United States)

Cartagena, M. Carmen; Tarquis, A. M.; Vázquez, J.; Serrano, A.; Arce, A.

2010-05-01

The Bologna process is to improve the quality of education, mobility, diversity and the competitiveness and involves three fundamental changes: transform of the structure of titles, changing in methods of teaching and implementation of the systems of quality assurance. Engineer Agronomist at the Universidad Politécnica de Madrid (UPM) has been offered as a degree of five years with a total of 400 credits and seven optional orientations: Crop Production, Plant and Breeding Protection, Environment, Agricultural Economics, Animal Production, Rural Engineering and Food Technology. Actually, the Bologna plan creates three new degrees: Engineering and Science Agronomic, Food Engineering and Agro-Environmental Engineering, with 240 ECTS each one of them and with specific professional characteristics. The changes that involve the introduction of these new degrees is perhaps the largest occurred never at the Spanish university system, not only by the drastic transformation in the structure of titles, but also by the new changes that lie ahead in teaching methods. Among others we will comment the following ones: -A year decreased duration of studies and therefore incorporation into the market. - Elimination of the seven current guidelines to create three specific qualifications of degree. -Decrease of optional subjects and increase in credits for the basic subjects. - Inclusion of business practices. - Increase in the number of credits of final project. - Changes in methodologies and a higher involvement of teachers and students in the education.

Undergraduate education in nuclear engineering in the USA

International Nuclear Information System (INIS)

Martin, W.R.

1993-01-01

The discipline of nuclear engineering is described, giving some historical background to explain the structure of the curricula commonly found in nuclear engineering programs in the U.S. Typical curricula are described, along with a specific example given by the University of Michigan undergraduate program in nuclear engineering. The National Academy of Sciences report on U.S. nuclear engineering education is summarized, and the major findings are presented, including data on the number of programs, number of degrees, and enrollment trends. Some discussion is made of manpower trends and the degree to which nuclear programs can supply nuclear engineers to meet the anticipated demands of the current decade and into the next century. (author) 12 refs.; 2 figs.; 4 tabs

A Rational Method for Ranking Engineering Programs.

Science.gov (United States)

Glower, Donald D.

1980-01-01

Compares two methods for ranking academic programs, the opinion poll v examination of career successes of the program's alumni. For the latter, "Who's Who in Engineering" and levels of research funding provided data. Tables display resulting data and compare rankings by the two methods for chemical engineering and civil engineering. (CS)

Master’s degree in Nuclear Engineering UPC-ENDESA. Creating synergy at industrial and academic levels

Energy Technology Data Exchange (ETDEWEB)

Batet, I.; Calviño, F.; Duch, M.A.; Dies, J.; León, P.; Fernández-Olano, P.

2015-07-01

The Master’s degree in Nuclear Engineering, born from the alignment of objectives of Academy and Industry, aims to prepare competent engineers to assume managerial positions within the Nuclear Industry. MNE is completely taught in English. Synergies are established at both industrial and academic levels. MNE syllabus has been designed (and is being continuously improved) with the help of industrial partners and the Spanish Regulatory Body (CSN). One half of the lectures are delivered by professionals external to the university. Besides ENDESA, other companies (ANAV, AREVA, ENRESA, ENSA, ENUSA, IDOM, Nuclenor, Tecnatom, Westinghouse) collaborate in the master. Lecturers from CSN and CIEMAT (the major Spanish research centre) participate in the Master as well. A large portion of the master contents is delivered as Project Based Learning, In general, active learning and team work activities are thoroughly used so as to help the students achieve the learning objectives and acquire a number of soft skills required by industry. MNE is embedded in EMINE, the European Master in Nuclear Energy (European Institute of Technology, KIC-InnoEnergy). As well, MNE is part of a double degree in the Barcelona Engineering School (ETSEIB) with the official Master in Industrial Engineering (MUEI). Having in the same classroom EMINE and MNE students creates a good working atmosphere, while allowing the future engineers work in a multicultural and international environment. The double degree MNE-MUEI allows students to acquire the MNE competencies and, at the same time, legal engineering attributions. It has been useful to attract good engineering students to the master. (Author)

Women's Doctoral Student Experiences and Degree Progress in Education versus Engineering

Science.gov (United States)

Masterman, Ann Katherine

2014-01-01

This study's purpose was to compare the lived experiences of doctoral women studying Education, a prototypically female field, with women studying Engineering, a prototypically male field to illustrate the phenomenon of doctoral degree progress in the two fields. Using critical feminist theory and Valian's (1999) concept of gender schemas, this…

Development and Implementation of Degree Programs in Electric Drive Vehicle Technology

Energy Technology Data Exchange (ETDEWEB)

Ng, Simon [Wayne State Univ., Detroit, MI (United States)

2013-09-30

The Electric-drive Vehicle Engineering (EVE) MS degree and graduate certificate programs have been continuing to make good progress, thanks to the funding and the guidance from DOE grant management group, the support from our University and College administrations, and to valuable inputs and feedback from our Industrial Advisory Board as well as our project partners Macomb Community College and NextEnergy. Table 1 below lists originally proposed Statement of Project Objectives (SOPO), which have all been completed successfully. Our program and course enrollments continue to be good and increasing, as shown in later sections. Our graduating students continue to get good job offers from local EV-related companies. Following the top recommendation from our Industrial Advisory Board, we were fortunate enough to be accepted into the prestigious EcoCAR2 (http://www.ecocar2.org/) North America university design competition, and have been having some modest success with the competition. But most importantly, EcoCAR2 offers the most holistic educational environment for integrating real-world engineering and design with our EVE graduate curriculum. Such integrations include true real-world hands-on course projects based on EcoCAR2 related tasks for the students, and faculty curricular and course improvements based on lessons and best practices learned from EcoCAR2. We are in the third and last year of EcoCAR2, and we have already formed a core group of students in pursuit of EcoCAR”3”, for which the proposal is due in early December.

Final report for the 1996 Engineer Starters Program (Pre-Freshmen Enrichment Program)

Energy Technology Data Exchange (ETDEWEB)

Sharpe, L. Jr.

1996-08-15

This report has been developed for the North Carolina Agricultural and Technical State University College of Engineering, Department of Energy and other foundations/corporations sponsoring the 1996 Engineer Starters Program and for general information. The College of Engineering conducted its Annual outreach program for Middle and High School students from July 8 to August 2, 1996. The continuing primary goal of this program is to expose youth to the various challenging opportunities in the Mathematics and Science based careers, Engineering and Technology. The curriculum for the summer of 1996 included: Mathematics; Science; Computers; Graphics; Problem Solving; Career Explorations; Communications; Field Trips to Manufacturing Plants/Industries; and Engineering Projects/Designs. The 1996 program included rising seventh through tenth graders. Parental involvement was instituted as a vital component of the summer experiences. The primary objective is to increase the number of minorities entering engineering and science professions.

Gasoline Engine Mechanics. Florida Vocational Program Guide.

Science.gov (United States)

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This vocational program guide is intended to assist in the organization, operation, and evaluation of a program in gasoline engine mechanics in school districts, area vocational centers, and community colleges. The following topics are covered: job duties of small-engine mechanics; program content (curriculum framework and student performance…

MatLab Programming for Engineers Having No Formal Programming Knowledge

Science.gov (United States)

Shaykhian, Linda H.; Shaykhian, Gholam Ali

2007-01-01

MatLab is one of the most widely used very high level programming languages for Scientific and engineering computations. It is very user-friendly and needs practically no formal programming knowledge. Presented here are MatLab programming aspects and not just the MatLab commands for scientists and engineers who do not have formal programming training and also have no significant time to spare for learning programming to solve their real world problems. Specifically provided are programs for visualization. Also, stated are the current limitations of the MatLab, which possibly can be taken care of by Mathworks Inc. in a future version to make MatLab more versatile.

Human Service Administrator Perceptions of Online MSW Degree Programs

Science.gov (United States)

Curran, Laura; Sanchez Mayers, Ray; Fulghum, Fontaine

2017-01-01

Online programs have proliferated rapidly in higher education, and this reality holds true for social work education as well. Employing a mixed methods design, this study looked at employer perceptions of online degrees compared to traditional degrees. Data was collected through an online survey that included Likert type and open-ended questions…

Case Study: Creation of a Degree Program in Computer Security. White Paper.

Science.gov (United States)

Belon, Barbara; Wright, Marie

This paper reports on research into the field of computer security, and undergraduate degrees offered in that field. Research described in the paper reveals only one computer security program at the associate's degree level in the entire country. That program, at Texas State Technical College in Waco, is a 71-credit-hour program leading to an…

Aerospace engineering educational program

Science.gov (United States)

Craft, William; Klett, David; Lai, Steven

1992-01-01

The principle goal of the educational component of NASA CORE is the creation of aerospace engineering options in the mechanical engineering program at both the undergraduate and graduate levels. To accomplish this goal, a concerted effort during the past year has resulted in detailed plans for the initiation of aerospace options in both the BSME and MSME programs in the fall of 1993. All proposed new courses and the BSME aerospace option curriculum must undergo a lengthy approval process involving two cirriculum oversight committees (School of Engineering and University level) and three levels of general faculty approval. Assuming approval is obtained from all levels, the options will officially take effect in Fall '93. In anticipation of this, certain courses in the proposed curriculum are being offered during the current academic year under special topics headings so that current junior level students may graduate in May '94 under the BSME aerospace option. The proposed undergraduate aerospace option curriculum (along with the regular mechanical engineering curriculum for reference) is attached at the end of this report, and course outlines for the new courses are included in the appendix.

Dual Degree Social Work Programs: Where are the Programs and Where are the Graduates?

Directory of Open Access Journals (Sweden)

Shari E. Miller

2008-09-01

Full Text Available This article presents results of an exploratory study designed to survey the dual degree graduates of one large school of social work, and to report on the prevalence and types of dual degree programs offered at accredited schools of social work in the U.S. Quantitative and qualitative data were gathered from 72 dual degree graduates. Income, career trajectories, identification with social work, satisfaction with the decision to obtain a dual degree, whether graduates would encourage others to follow the dual degree path, and implications for the social work profession and social work education are discussed.

Degree program changes and curricular flexibility: Addressing long held beliefs about student progression

Science.gov (United States)

Ricco, George Dante

In higher education and in engineering education in particular, changing majors is generally considered a negative event - or at least an event with negative consequences. An emergent field of study within engineering education revolves around understanding the factors and processes driving student changes of major. Of key importance to further the field of change of major research is a grasp of large scale phenomena occurring throughout multiple systems, knowledge of previous attempts at describing such issues, and the adoption of metrics to probe them effectively. The problem posed is exacerbated by the drive in higher education institutions and among state legislatures to understand and reduce time-to-degree and student attrition. With these factors in mind, insights into large-scale processes that affect student progression are essential to evaluating the success or failure of programs. The goals of this work include describing the current educational research on switchers, identifying core concepts and stumbling blocks in my treatment of switchers, and using the Multiple Institutional Database for Investigating Engineering Longitudinal Development (MIDFIELD) to explore how those who change majors perform as a function of large-scale academic pathways within and without the engineering context. To accomplish these goals, it was first necessary to delve into a recent history of the treatment of switchers within the literature and categorize their approach. While three categories of papers exist in the literature concerning change of major, all three may or may not be applicable to a given database of students or even a single institution. Furthermore, while the term has been coined in the literature, no portable metric for discussing large-scale navigational flexibility exists in engineering education. What such a metric would look like will be discussed as well as the delimitations involved. The results and subsequent discussion will include a description of

Westinghouse Hanford Company Engineering Indoctrination Program

International Nuclear Information System (INIS)

Hull, K.J.

1991-02-01

Westinghouse Hanford Company has recognized that a learning curve exists in its engineering design programs. A one-year training program is under way to shorten this learning curve by introducing new engineers, both recent graduates and experienced new hires, to both company standards and intuitive engineering design processes. The participants are organized into multi-disciplined teams and assigned mentor engineers who assist them in completing a team project. Weekly sessions alternate between information presentations and time to work on team design projects. The presentations include information that is applicable to the current phase of the design project as well as other items of interest, such as site tours, creative thinking, and team brainstorming techniques. 1 fig

Retaining minorities in engineering: Assessment of a program prototype

Science.gov (United States)

Good, Jennifer Marie (Phillips)

Program assessment is an essential part of healthy program development. Assessment should include multiple considerations, dimensions, and outcomes that match the program's objectives. As a newly formed retention program, the Auburn University Minority Engineering Program, designed to help pre-engineering minority students make the transition into their freshman year of university studies, incorporated evaluation and assessment into all three components of the program (the interactive learning laboratory, critical-thinking workshops, and Sunday-evening tutorials) from the program's inception. If students successfully adapted to the university environment and the demands of the pre-engineering course of study, then retention of minority students in the College of Engineering should improve. Data were gathered on the students involved in the various program components. Students who entered the Minority Engineering Program were pre- and posttested on three standardized subtests (critical thinking, mathematics, and science reasoning) of the Collegiate Assessment of Academic Proficiency. The first-quarter grade-point averages of the students were also gathered to compare their grades to freshman students in previous quarters within the College of Engineering. Qualitative data were also gathered on this same group of students. An analysis of the data revealed that student achievement is affected by involvement in the Minority Engineering Program. Specifically, the first quarter grade point averages of students involved in the program exceeded those of their peers in earlier years of study prior to the program's existence. In addition, mathematics and science reasoning scores on standardized tests increased pre- to postintervention. Comments collected in journals and files also demonstrated use of critical-thinking and problem-solving skills employed by the students. Recommendations for alterations of the program were made based on the outcome of the program evaluation

Competencies for Graduate Culinary Management Degree Programs: Stakeholders' Perspectives

Science.gov (United States)

George, Annette A.

2009-01-01

Available literature on graduate hospitality education was highly focused on required competencies for hospitality management degree programs but not on culinary management. One possible explanation is that the culinary sector still lags behind in the formation of graduate culinary management programs in the United States. This causal comparative…

Air Force-Wide Needs for Science, Technology, Engineering, and Mathematics (STEM) Academic Degrees

Science.gov (United States)

2014-01-01

anthropology (0190), mathematical statistics (1529), general math (AFIT faculty only), metallurgy (1321), and actuarial science (1510). 97 Tier II. Few...linking or frEE DownloAD At www.rand.org C O R P O R A T I O N Research Report Air Force–Wide Needs for Science , Technology, Engineering, and...00-00-2014 4. TITLE AND SUBTITLE Air Force-Wide Needs for Science , Technology, Engineering, and Mathematics (STEM) Academic Degrees 5a. CONTRACT

Critical assessment and outlook for the 50 biomedical engineering undergraduate programs in Mexico.

Science.gov (United States)

Azpiroz-Leehan, Joaquín; Martínez Licona, Fabiola; Urbina Medal, E Gerardo; Cadena Méndez, Miguel; Sacristán Rock, Emilio

2015-01-01

Biomedical Engineering (BME) has been taught in Mexico at the undergraduate level for over forty years. The rationale for the introduction of this profession was to help manage and maintain the growing technological infrastructure in the health care system during the seventies. Owing to this, it is not surprising that early versions of the BME curricula were oriented towards clinical engineering and medical instrumentation. In the last decade the number of programs has grown from three in the seventies and eighties to fifty at present. This work is the result of the analysis of the BME programs in all the institutions that offer this degree in Mexico. Three main issues were studied: the curricula, the sub-disciplines that were emphasized in the programs and the job market. Results have shown a striking resemblance in most of the programs, which are mostly dedicated to teaching aspects of medical instrumentation and clinical engineering. These results reflect an agreement with the requirements of the job market, but since most job offerings are for low-paying positions in sales, service and hospital maintenance, we question the wisdom of stressing these sub-specialties at research universities, where faculties and research labs offer a wide variety of options. An analysis of work at these centers shows that most of the results are publications, so the need to emphasize translational research and partnerships with industry are suggested.

Analysis of Engineering Content within Technology Education Programs

Science.gov (United States)

Fantz, Todd D.; Katsioloudis, Petros J.

2011-01-01

In order to effectively teach engineering, technology teachers need to be taught engineering content, concepts, and related pedagogy. Some researchers posit that technology education programs may not have enough content to prepare technology teachers to teach engineering design. Certain technology teacher education programs have responded by…

A Tale of Two Majors: Explaining the Gender Gap in STEM Employment among Computer Science and Engineering Degree Holders

Directory of Open Access Journals (Sweden)

Sharon Sassler

2017-07-01

Full Text Available We examine factors contributing to the gender gap in employment in science, technology, engineering, and math (STEM among men and women with bachelor’s degrees in computer science and engineering, the two largest and most male-dominated STEM fields. Data come from the National Science Foundation’s (NSF Scientists and Engineers Statistical Data System (SESTAT from 1995 to 2008. Different factors are associated with persistence in STEM jobs among computer science and engineering degree holders. Conditional on receiving a degree in computer science, women are 14 percentage points less likely to work in STEM than their male counterparts. Controlling for demographic and family characteristics did little to change this gender gap. Women with degrees in engineering are approximately 8 percentage points less likely to work in STEM than men, although about half of this gap is explained by observed differences between men and women. We document a widening gender gap in STEM employment in computer science, but this gender gap narrows across college cohorts among those with degrees in engineering. Among recent computer science graduates, the gender gap in STEM employment for white, Hispanic, and black women relative to white men is even larger than for older graduates. Gender and race gaps in STEM employment for recent cohorts of engineering graduates are generally small, though younger Asian women and men no longer have an employment advantage relative to white men. Our results suggest that a one-size-fits-all approach to increasing women’s representation in the most male-dominated STEM fields may not work.

Discerning Quality Evaluation in Online Graduate Degree Programs in Agricultural Sciences and Engineering

Science.gov (United States)

Downs, Holly A.

2011-01-01

Enormous demands for online degrees in higher education have increased the pressure on universities to launch web courses and degrees quickly and, at times, without properly attending to the quality of these ventures. There is scarce research that defines which quality indicators are used to assess cyberlearning environments, how different…

Virginia power nuclear power station engineer training program

International Nuclear Information System (INIS)

Williams, T.M.; Haberstroh-Timpano, S.

1987-01-01

In response to the Institute of Nuclear Power Operations (INPO) accreditation requirements for technical staff and manager, Virginia Power developed the Nuclear Power Station Engineer Training Programs (NPSETP). The NPSETP is directed toward enhancing the specific knowledge and skills of company engineers, especially newly hired engineers. The specific goals of the program are to promote safe and reliable plant operation by providing engineers and appropriate engineering technicians with (1) station-specific basic skills; (2) station-specific specialized skills in the areas of surveillance and test, plant engineering, nuclear safety, and in-service inspection. The training is designed to develop, maintain, and document through demonstration the required knowledge and skills of the engineers in the identified groups at North Anna and Surry Power Stations. The program responds to American National Standards Institute, INPO, and US Nuclear Regulatory Commission standards

Academic program models for undergraduate biomedical engineering.

Science.gov (United States)

Krishnan, Shankar M

2014-01-01

There is a proliferation of medical devices across the globe for the diagnosis and therapy of diseases. Biomedical engineering (BME) plays a significant role in healthcare and advancing medical technologies thus creating a substantial demand for biomedical engineers at undergraduate and graduate levels. There has been a surge in undergraduate programs due to increasing demands from the biomedical industries to cover many of their segments from bench to bedside. With the requirement of multidisciplinary training within allottable duration, it is indeed a challenge to design a comprehensive standardized undergraduate BME program to suit the needs of educators across the globe. This paper's objective is to describe three major models of undergraduate BME programs and their curricular requirements, with relevant recommendations to be applicable in institutions of higher education located in varied resource settings. Model 1 is based on programs to be offered in large research-intensive universities with multiple focus areas. The focus areas depend on the institution's research expertise and training mission. Model 2 has basic segments similar to those of Model 1, but the focus areas are limited due to resource constraints. In this model, co-op/internship in hospitals or medical companies is included which prepares the graduates for the work place. In Model 3, students are trained to earn an Associate Degree in the initial two years and they are trained for two more years to be BME's or BME Technologists. This model is well suited for the resource-poor countries. All three models must be designed to meet applicable accreditation requirements. The challenges in designing undergraduate BME programs include manpower, facility and funding resource requirements and time constraints. Each academic institution has to carefully analyze its short term and long term requirements. In conclusion, three models for BME programs are described based on large universities, colleges, and

A new educational program on biomedical engineering

NARCIS (Netherlands)

van Alste, Jan A.

2000-01-01

At the University of Twente together with the Free University of Amsterdam a new educational program on Biomedical Engineering will be developed. The academic program with a five-year duration will start in September 2001. After a general, broad education in Biomedical Engineering in the first three

Data systems and computer science: Software Engineering Program

Science.gov (United States)

Zygielbaum, Arthur I.

1991-01-01

An external review of the Integrated Technology Plan for the Civil Space Program is presented. This review is specifically concerned with the Software Engineering Program. The goals of the Software Engineering Program are as follows: (1) improve NASA's ability to manage development, operation, and maintenance of complex software systems; (2) decrease NASA's cost and risk in engineering complex software systems; and (3) provide technology to assure safety and reliability of software in mission critical applications.

Definition study for variable cycle engine testbed engine and associated test program

Science.gov (United States)

Vdoviak, J. W.

1978-01-01

The product/study double bypass variable cycle engine (VCE) was updated to incorporate recent improvements. The effect of these improvements on mission range and noise levels was determined. This engine design was then compared with current existing high-technology core engines in order to define a subscale testbed configuration that simulated many of the critical technology features of the product/study VCE. Detailed preliminary program plans were then developed for the design, fabrication, and static test of the selected testbed engine configuration. These plans included estimated costs and schedules for the detail design, fabrication and test of the testbed engine and the definition of a test program, test plan, schedule, instrumentation, and test stand requirements.

Master’s Degree Programs of Camarines Norte State College, Philippines: Impact on Its Graduates

Directory of Open Access Journals (Sweden)

Godofredo E. Peteza, Jr.

2017-02-01

Full Text Available This research determined the impact of the master’s degree programs offered in the Graduate School such as Master in Business Administration, Master in Public Administration, Master in Management majors in Human Resource Management and Educational Planning and Management on its graduates from 2009 to 2013. Descriptive-survey method supplemented by interview was employed to identify specifically the profile of the graduates of master’s degree programs in terms of age, sex, civil status, level of appointment before and after taking the master’s degree program, monthly income before and after taking the master’s degree program, number of promotions after graduation, and years in service and the impact of the CNSC Graduate School’s Master’s Degree Programs along professional practice, career development; and employment. Results show that majority of the respondents are in the middle age from 31 -37 years old, married, mostly females, 6-10 years in service and have one promotion after they have graduated from their respective master’s degrees. The level of appointment of the respondents has a positive movement from rank and file to supervisory and managerial levels positions. The Graduate School’s Master’s degree programs provided high impact on the graduates’ professional practice, and on employment while average impact on career development.

HBCUs and Chemical Engineering: Analysis of Baccalaureate Programs

Science.gov (United States)

Reeves, Sheena; Thompson, Audie

2018-01-01

Historically Black Colleges and Universities (HBCUs) provide significant STEM degrees to African Americans. Initiatives toward increasing diversity in STEM fields have been implemented by government and industry leaders. HBCUs annually award over 20% of all African American baccalaureate chemical engineering degrees. This speaks volume to the…

Civil Engineering Technology Program Guide.

Science.gov (United States)

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide presents civil engineering technology curriculum for technical institutes in Georgia. The general information section contains the following: purpose and objectives; program description, including admissions, typical job titles, and accreditation and certification; and curriculum model, including standard curriculum sequence and…

The University of Utah Nuclear Engineering Program

International Nuclear Information System (INIS)

Jevremovic, T.; McDonald, L. IV; Schow, R.

2016-01-01

As of 2014, the University of Utah Nuclear Engineering Program (UNEP) manages and maintains over 7,000 ft 2 (~650 m 2 ) nuclear engineering facilities that includes 100 kW TRIGA Mark I and numerous laboratories such as radiochemistry, microscopy, nuclear forensics, nuclear medicine, radiation detection and instrumentation laboratories. The UNEP offers prestigious educational and training programs in the field of faculty reserach: reactor physics, reactor design and operation, advanced numerical modeling and visualizations in radiation transport, radiochemistry, nuclear forensics, radiation detection and detector designs, signal processing, nuclear medicine, nuclear space and nuclear robotic’s engineering and radiological sciences. With the state-of-the-art nuclear instrumentation and state-of-the-art numerical modeling tools, reserach reactor and modernized educational and training programs, we positioned ourselves in the last five years as the fastest growing national nuclear engineering program attracting the students from many disciplines such as but not limited to: chemical engineering, civil engineering, environmental engineering, chemistry, physics, astronomy, medical sciences, and others. From 2012, we uniquely developed and implemented the nuclear power plants’ safety culture paradigm that we use for day-to-day operation, management and maintenance of our facilities, as well as train all our students at undergraduate and graduate levels of studies. We developed also a new distance-learning approaches in sharing knowledge about experiential learning based on no-cost internet-tools combined with the use of mobile technologies. (author)

Factors Affecting Adult Student Dropout Rates in the Korean Cyber-University Degree Programs

Science.gov (United States)

Choi, Hee Jun; Kim, Byoung Uk

2018-01-01

Few empirical studies of adult distance learners' decisions to drop out of degree programs have used large enough sample sizes to generalize the findings or data sets drawn from multiple online programs that address various subjects. Accordingly, in this study, we used a large administrative data set drawn from multiple online degree programs to…

Curriculum Evaluation and Employers Opinions: the case study of Educational Technology Program in Bachelor Degree (Continuing Program

Directory of Open Access Journals (Sweden)

Nakhon Lalognam

2016-09-01

Full Text Available The purposes of this research were: 1 to evaluate the Educational Technology Program (Continuing Program in Bachelor Degree curriculum which is revised in 2007 by applying CIPP model for evaluation. 2 to study the opinions of the employers about the ideal characteristics and actual characteristics of graduates. 3 to study the opinions for the requirements of the Educational Technology Program in Bachelor Degree (Continuing Program and knowledge implementation in work of graduates. 4 to make the suggestions and guidelines to improve the Educational Technology Program in Bachelor Degree (Continuing Program to achieve potentiality and responsive for the requirements of learners and employers. The sample of this research were 310 persons ; consisted of graduates in the Educational Technology Program in Bachelor Degree (Continuing Program in academic year 2006 - 2010, the committee of the Educational Technology Program in Bachelor Degree (Continuing Program , instructors and employers by using Multi-stage Random Sampling and Simple Random Sampling. The instruments of this research were the 5 levels rating scale questionnaire and the structured interview type. They consisted of 3 sets: 1 for graduates, 2 for the committee of the Educational Technology Program in Bachelor Degree (Continuing Program and 3 for instructors and employers. The research found that: 1. The results of evaluation on the Educational Technology Program in Bachelor Degree (Continuing Program which is revised in 2007 were: 1.1 The opinions of graduates to curriculum in all of aspects were average at the uncertain level which the context aspect was at the high level, input aspect was at the uncertain level, process aspect was at the uncertain level and product aspect was at the high level. 1.2 The opinions of the curriculum committee and instructors to curriculum in all of aspects were average at the high level which the context aspect was at the high level, input aspect was at the

Developing the curriculum for a new Bachelor's degree in Engineering for Sustainable Development

NARCIS (Netherlands)

Lozano, F.J.; Lozano, R.

2013-01-01

With a growing interest in sustainability, a number of universities have engaged in educating the future leaders, decision makers, scientists, and engineers on how their decisions can help societies become more sustainable. This paper presents the process for developing the Bachelor’s degree

Developing the curriculum for a new Bachelor's degree in Engineering for Sustainable Development

NARCIS (Netherlands)

Lozano, Francisco J.; Lozano, Rodrigo

2014-01-01

With a growing interest in sustainability, a number of universities have engaged in educating the future leaders, decision makers, scientists, and engineers on how their decisions can help societies become more sustainable. This paper presents the process for developing the Bachelor's degree

A brief history of graduate distance education in nuclear engineering at Penn State Univ

International Nuclear Information System (INIS)

Hochreiter, L. E.; Zimmerman, D. L.; Brenizer Jr, J. S.; Stark, M. A.

2006-01-01

The Pennsylvania State University Nuclear Engineering Distance Education Program has a twenty year history of providing graduate level distance education in Nuclear Engineering. The Distance Education Program was initiated as a specific program which was developed for the Westinghouse Energy Systems Divisions in Pittsburgh. In 1983, Carnegie-Mellon University (CMU) decided to terminate its small Nuclear Engineering Program. Up until that time, Westinghouse employees could enroll at CMU for graduate classes in Nuclear Engineering as well as other engineering disciplines and could obtain a masters degree or if desired, could continue for a Ph.D. degree. (authors)

Automotive Stirling engine development program: A success

Science.gov (United States)

Tabata, W. K.

1987-01-01

The original 5-yr Automotive Stirling Engine Development Program has been extended to 10 years due to reduced annual funding levels. With an estimated completion date of April 1988, the technical achievements and the prospectives of meeting the original program objectives are reviewed. Various other applications of this developed Stirling engine technology are also discussed.

Center for Alternative Fuels Research Program | College of Engineering &

Science.gov (United States)

Electrical Engineering Instructional Laboratories Student Resources Industrial & Manufacturing Engineering Industrial & Manufacturing Engineering Academic Programs Industrial & Manufacturing Engineering Major Industrial & Manufacturing Engineering Minor Industrial & Manufacturing Engineering

The road to developing an advanced degree program in public health preparedness.

Science.gov (United States)

Cherry, Robert A; Davis, Tom

2007-08-01

The master of homeland security (MHS) degree in public health preparedness at the Pennsylvania State University College of Medicine is the first degree program of its kind offered by any U.S. medical school. The field of public health preparedness has been increasingly viewed as a new, emerging professional discipline, which academic medicine is well positioned to complement. The process by which the MHS program has evolved from conception to realization is a case study in the mission-based alignment of core values and leadership between the government and academic medicine. Recognizing the need for multidisciplinary involvement, the program architects reconsidered the traditional approach to the development and implementation of new graduate degree programs. Instead, a more flexible, loosely connected network of strategic partners and alliances was adopted. These partnerships were developed and cultivated by vested individuals who excelled in specific core competencies and came together to create value. This allowed for both the expertise and flexibility needed to adapt quickly to the evolving homeland security environment in the United States. To that end, this article describes the 10-step multidisciplinary program-development process that spanned three years and culminated in the establishment of this new graduate degree program. The MHS program as it now stands focuses on public health preparedness, including epidemiological evaluation, disaster communication and psychology, agricultural biosecurity, and critical infrastructure protection. The program is geared toward the practicing professional already working in the field, and its graduates are positioned to be among the top leaders, educators, and researchers in homeland security.

IMpact of international accreditation in the recognition of academic degrees in the domestic and foreign labor market. Case study: Civil engineering program

Directory of Open Access Journals (Sweden)

Jose Barragan Codina

2015-07-01

Full Text Available In a globalized era it is not enough to have a professional qualification to ensure economic and professional success. The academic background of professionals must be adequate to face challenges and solve problems of a globalized and dynamic world. Civil engineers face many complications when seeking an international career. There are many differences within the profession globally such as: resources, workforce, climate, language, culture, philosophies, regulations, etc. which raise the entry barriers to fully practice as a civil engineer. The International accreditations play a major role as the first evidence of the civil engineer technical proficiency. These assure the quality of the higher education curricula and add value to the human capital on an international context. Despite the fact that many Mexican Universities have academic programs which have international accreditations, civil engineer graduates cannot easily work across borders. This paper describes the impact that international accreditation has for civil engineers when seeking an international career.

Factors affecting attrition from associate degree nursing programs in North Carolina.

Science.gov (United States)

Fraher, Erin; Belsky, Daniel W; Gaul, Katie; Carpenter, Jessica

2010-01-01

Projected nursing shortfalls have spurred the state of North Carolina to initiate a series of strategies to increase the number of graduates from pre-licensure Registered Nurse (RN) programs. These efforts have been largely successful, but attrition rates from Associate Degree Nursing (ADN) programs remain high. Only 58% of students entering ADN programs complete the degree. While policy makers are keenly aware that attrition from ADN programs is problematic, there is a lack of empirical evidence to identify the specific factors contributing to student attrition. In late 2007, the North Carolina Community College System (NCCCS) asked the Cecil G. Sheps Center for Health Services Research to conduct a study of Associate Degree Nursing program attrition and its causes. This paper summarizes the findings from that study and identifies the student- and program-level characteristics associated with more and less successful ADN programs. While this study was conducted in a single state in the US, the substantive findings--as well as the methodological approach--may be useful to other states and other countries. The study revealed that socioeconomically disadvantaged students (those with GEDs and those who received Pell Grants), non-white students, and younger and older students were less likely to graduate on-time. When programs were grouped into high and low performance categories on the basis of risk adjusted graduation rates, high performing programs were distinguished by more stringent admissions policies and better educated faculties. Nursing shortages have garnered significant attention and resources from state and national workforce planners in recent years. But to date, investments in expanding program capacity have not been matched by attention to program completion rates, with the result that we have enlarged the pipeline without fixing the leaks. Faculty shortages and recession-induced resource constraints limit further program expansion. Addressing attrition

A global study of undergraduate environmental engineering programs

International Nuclear Information System (INIS)

Abro, Q.M.

2005-01-01

Recent analyses of environmental engineering and management (EE and M) field has highlighted its rapidly expanding size and increasingly diverse nature (Hart and Nolan, 1999). The last 30 years have seen growing international recognition that the challenges associated with environmental degradation and sustainable development have important implications for, and connections with, education and research (IUCN, 1970; UNCED, 1992). The concept of environmental education is now widespread in national educational policies, curriculum documents, curriculum development initiatives, and conservation strategies. Reflecting this trend, several universities throughout the world offer a wide range of graduate as well as undergraduate programs in environment. These programs have originated from various academic schools and disciplines (engineering, public policy, business, management, etc) creating considerable diversity of focus, themes emphasized, courses and methods of offerings. The rise of these programs, in part, reflects the growing need for engineers, technologists as well as managers, who are able to understand, contribute to, and manage a wide variety of technology-based programs and organizations. In addition, the large number of environmental engineering research journals, professional associations and international/national conferences point to the rapid growth of this field. This paper will examine the trends in provision, type of program, major curriculum focus of undergraduate environmental engineering and management education and then compare these trends with the emerging trends in the environmental engineering and management research journals of the last decade. (author)

Impact of degree program satisfaction on the persistence of college students

NARCIS (Netherlands)

Suhre, Cor J. M.; Jansen, Ellen P. W. A.; Harskamp, Evert

Many theories on college retention recognize the significance of student satisfaction as a positive factor in students' persistence. Yet, there are few theories that address the relationship of degree program satisfaction to study behaviour and dropout. This paper explores the impact of degree

Engineering Undergraduates' Views of A-Level Mathematics and Further Mathematics as Preparation for Their Degree

Science.gov (United States)

Darlington, Ellie; Bowyer, Jessica

2017-01-01

An ongoing reform programme of the post-16 Advanced "A"-level qualifications in England and Wales means that pre-university mathematics content and assessment will change from 2017. Undergraduate engineering is a subject that relies heavily on mathematics, and applicants to engineering degree programmes in the UK are required to have…

Mathematics Learning by Programming in a Game Engine

DEFF Research Database (Denmark)

Triantafyllou, Evangelia; Timcenko, Olga; Misfeldt, Morten

2017-01-01

This paper emerges from our research focusing on mathematics education in trans-disciplinary engineering programs and presents a case study in such an engineering discipline, namely the Media Technology program at Aalborg University Copenhagen, Denmark. In this case study, we substituted traditio...

Persistence of Women in Online Degree-Completion Programs

Directory of Open Access Journals (Sweden)

Terry Müller

2008-06-01

Full Text Available Although online courses at postsecondary institutions promise adults access, flexibility, and convenience, many barriers to online learning remain. This article presents findings from a qualitative case study, which explored the phenomenon of undergraduate and graduate women learners’ persistence in online degree-completion programs at a college in the Northeast of the United States. Research questions asked why women learners persisted or failed to persist, and how factors supporting or hindering persistence influenced learners. Interviews with a purposeful sample of 20 participants revealed the complexity of variables affecting learners’ persistence to graduation. Findings suggested that multiple responsibilities, insufficient interaction with faculty, technology, and coursework ranked highest as barriers to women’s persistence. Strong motivation to complete degrees, engagement in the learning community, and appreciation for the convenience of an online degree-completion option facilitated persistence.

About | College of Engineering & Applied Science

Science.gov (United States)

; Applied Science Powerful Ideas. Proven Results. Search for: Go This site All UWM Search Site Menu Skip to Degree Completion Program Graduate Programs Master of Science Programs Concentration in Biomedical Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on

Evaluating Quality in Associate Degree Culinary Arts Programs

Science.gov (United States)

Hertzman, Jean; Ackerman, Robert

2010-01-01

Purpose: The purpose of this study is to determine which categories and indicators of quality are best suited to evaluating associate degree culinary arts programs (ADCAP). Design/methodology/approach: The researchers surveyed a national sample of culinary educators and industry chefs in the USA. The instrument asked the participants to rate the…

History and Benefits of Engine Level Testing Throughout the Space Shuttle Main Engine Program

Science.gov (United States)

VanHooser, Katherine; Kan, Kenneth; Maddux, Lewis; Runkle, Everett

2010-01-01

Rocket engine testing is important throughout a program s life and is essential to the overall success of the program. Space Shuttle Main Engine (SSME) testing can be divided into three phases: development, certification, and operational. Development tests are conducted on the basic design and are used to develop safe start and shutdown transients and to demonstrate mainstage operation. This phase helps form the foundation of the program, demands navigation of a very steep learning curve, and yields results that shape the final engine design. Certification testing involves multiple engine samples and more aggressive test profiles that explore the boundaries of the engine to vehicle interface requirements. The hardware being tested may have evolved slightly from that in the development phase. Operational testing is conducted with mature hardware and includes acceptance testing of flight assets, resolving anomalies that occur in flight, continuing to expand the performance envelope, and implementing design upgrades. This paper will examine these phases of testing and their importance to the SSME program. Examples of tests conducted in each phase will also be presented.

Providing Homeless Adults with Advantage: A Sustainable University Degree Program

Science.gov (United States)

Sinatra, Richard; Lanctot, Melissa Kim

2016-01-01

A university partnered with the New York City Department of Homeless Services (NYC DHS) to provide cohorts of adults a 60-credit Associate Degree Program in Business Administration over a 2-year period. Results of two cohorts of 30 Advantage Academy Program graduates revealed significant improvement in College Board AccuPlacer (ACPL) Arithmetic…

CDIO Projects in Civil Engineering Study Program at DTU

DEFF Research Database (Denmark)

Krogsbøll, Anette; Simonsen, Claus; Christensen, Jørgen Erik

2011-01-01

or a design build project on each of the first four semesters. In this paper the four projects in the civil engineering study program are described along with a brief description of the entire study program. The aim is to provide additional information and documentation to accompany an exposition where......In 2008 all Bachelor of engineering study programs at the Technical University of Denmark (DTU) have been adopted to the “Conceive – Design – Implement – Operate” approach. As part of the necessary changes it was decided that all seven study programs should have a cross disciplinary project...... students present their projects. Learning outcomes, training and assessment of personal, professional and social engineering skills are described from a project point of view. Progression of engineering skills is discussed from a study program perspective. The interrelation between the various elements...

English Curriculum in Global Engineer Education Program

Science.gov (United States)

Furuya, Okitsugu; Bright, Olga; Saika, Takashi

The educational goal of the Faculty of Global Engineering (FGE) of the Kogakuin University is to prepare the graduates to be global engineers. The requirements for the global engineer are multifold; having the basic and advanced engineering knowledge together with the international communication skills and experiences. The curriculum at the Kogakuin University has been designed and developed over the last ten years. Among others, “Communication Skills for Global Engineers (CSGE) ” and “Engineering Clinic Program (ECP) ” play essential roles, the former providing the students with the communication skills and the latter engineering design skills. An impact on the students studying together with foreign students is so strong and immeasurable. The English they learned in Japan does not work as well as they thought it would, and the attitude of the foreign students toward studying they observe is a kind of “shocking” . The student who joined ECP abroad/CSGE abroad come back to Japan as a very inspired and different person, the first step becoming a global engineer. In this paper, various aspects of the program will be discussed with the problem areas to be further improved being identified.

Systems engineering implementation plan for the liquid effluents services program

International Nuclear Information System (INIS)

Lowe, S.S.

1995-01-01

A graded approach is being taken by the Liquid Effluents Services Program in implementing systems engineering because of the advanced state of the program. The approach is cost-effective and takes credit for related work already completed, yet retains the benefits of systems engineering. This plan describes how the Liquid Effluents Services Program will implement systems engineering so there is a common understanding. Systems engineering work to be performed and the products of that work are identified. The relation to the current planning process and integration with the sitewide systems engineering effort is described

Program For Engineering Electrical Connections

Science.gov (United States)

Billitti, Joseph W.

1990-01-01

DFACS is interactive multiuser computer-aided-engineering software tool for system-level electrical integration and cabling engineering. Purpose of program to provide engineering community with centralized data base for putting in and gaining access to data on functional definition of system, details of end-circuit pinouts in systems and subsystems, and data on wiring harnesses. Objective, to provide instantaneous single point of interchange of information, thus avoiding error-prone, time-consuming, and costly shuttling of data along multiple paths. Designed to operate on DEC VAX mini or micro computer using Version 5.0/03 of INGRES.

The AIBS In Yugoslavia: Programs in Biomedical Engineering

Science.gov (United States)

Thompson, Mary-Frances

1978-01-01

Programs in biomedical engineering have been developing worldwide since World War II. This article describes a multidisciplinary program which operates in Yugoslavia through a cooperative effort between that county and the AIBS. A major problem has been the slowness with which hospitals accept the concept of biomedical engineering. (MA)

The Effects Of Gender, Engineering Identification, and Engineering Program Expectancy On Engineering Career Intentions: Applying Hierarchical Linear Modeling (HLM) In Engineering Education Research

Science.gov (United States)

Tendhar, Chosang; Paretti, Marie C.; Jones, Brett D.

2017-01-01

This study had three purposes and four hypotheses were tested. Three purposes: (1) To use hierarchical linear modeling (HLM) to investigate whether students' perceptions of their engineering career intentions changed over time; (2) To use HLM to test the effects of gender, engineering identification (the degree to which an individual values a…

Integrating computer programs for engineering analysis and design

Science.gov (United States)

Wilhite, A. W.; Crisp, V. K.; Johnson, S. C.

1983-01-01

The design of a third-generation system for integrating computer programs for engineering and design has been developed for the Aerospace Vehicle Interactive Design (AVID) system. This system consists of an engineering data management system, program interface software, a user interface, and a geometry system. A relational information system (ARIS) was developed specifically for the computer-aided engineering system. It is used for a repository of design data that are communicated between analysis programs, for a dictionary that describes these design data, for a directory that describes the analysis programs, and for other system functions. A method is described for interfacing independent analysis programs into a loosely-coupled design system. This method emphasizes an interactive extension of analysis techniques and manipulation of design data. Also, integrity mechanisms exist to maintain database correctness for multidisciplinary design tasks by an individual or a team of specialists. Finally, a prototype user interface program has been developed to aid in system utilization.

Variable Cycle Engine Technology Program Planning and Definition Study

Science.gov (United States)

Westmoreland, J. S.; Stern, A. M.

1978-01-01

The variable stream control engine, VSCE-502B, was selected as the base engine, with the inverted flow engine concept selected as a backup. Critical component technologies were identified, and technology programs were formulated. Several engine configurations were defined on a preliminary basis to serve as demonstration vehicles for the various technologies. The different configurations present compromises in cost, technical risk, and technology return. Plans for possible variably cycle engine technology programs were formulated by synthesizing the technology requirements with the different demonstrator configurations.

Advanced interdisciplinary undergraduate program: light engineering

Science.gov (United States)

Bakholdin, Alexey; Bougrov, Vladislav; Voznesenskaya, Anna; Ezhova, Kseniia

2016-09-01

The undergraduate educational program "Light Engineering" of an advanced level of studies is focused on development of scientific learning outcomes and training of professionals, whose activities are in the interdisciplinary fields of Optical engineering and Technical physics. The program gives practical experience in transmission, reception, storage, processing and displaying information using opto-electronic devices, automation of optical systems design, computer image modeling, automated quality control and characterization of optical devices. The program is implemented in accordance with Educational standards of the ITMO University. The specific features of the Program is practice- and problem-based learning implemented by engaging students to perform research and projects, internships at the enterprises and in leading Russian and international research educational centers. The modular structure of the Program and a significant proportion of variable disciplines provide the concept of individual learning for each student. Learning outcomes of the program's graduates include theoretical knowledge and skills in natural science and core professional disciplines, deep knowledge of modern computer technologies, research expertise, design skills, optical and optoelectronic systems and devices.

Method for solving fully fuzzy linear programming problems using deviation degree measure

Institute of Scientific and Technical Information of China (English)

Haifang Cheng; Weilai Huang; Jianhu Cai

2013-01-01

A new ful y fuzzy linear programming (FFLP) prob-lem with fuzzy equality constraints is discussed. Using deviation degree measures, the FFLP problem is transformed into a crispδ-parametric linear programming (LP) problem. Giving the value of deviation degree in each constraint, the δ-fuzzy optimal so-lution of the FFLP problem can be obtained by solving this LP problem. An algorithm is also proposed to find a balance-fuzzy optimal solution between two goals in conflict: to improve the va-lues of the objective function and to decrease the values of the deviation degrees. A numerical example is solved to il ustrate the proposed method.

Emeritus Scientists, Mathematicians and Engineers (ESME) program

Energy Technology Data Exchange (ETDEWEB)

Sharlin, H.I.

1992-09-01

The Emeritus Scientists, Mathematicians and Engineers (ESME) program matches retired scientists and engineers with wide experience with elementary school children in order to fuel the children's natural curiosity about the world in which they live. The long-range goal is to encourage students to maintain the high level of mathematical and science capability that they exhibit at an early age by introducing them to the fun and excitement of the world of scientific investigation and engineering problem solving. Components of the ESME program are the emeriti, established teacher-emeriti teams that work to produce a unit of 6 class hours of demonstration or hands-on experiments, and the encounter by students with the world of science/engineering through the classroom sessions and a field trip to a nearby plant or laboratory.

Engineering a General Education Program: Designing Mechanical Engineering General Education Courses

Science.gov (United States)

Fagette, Paul; Chen, Shih-Jiun; Baran, George R.; Samuel, Solomon P.; Kiani, Mohammad F.

2013-01-01

The Department of Mechanical Engineering at our institution created two engineering courses for the General Education Program that count towards second level general science credit (traditional science courses are first level). The courses were designed for the general student population based upon the requirements of our General Education Program…

Integrating electron microscopy into nanoscience and materials engineering programs

Science.gov (United States)

Cormia, Robert D.; Oye, Michael M.; Nguyen, Anh; Skiver, David; Shi, Meng; Torres, Yessica

2014-10-01

Preparing an effective workforce in high technology is the goal of both academic and industry training, and has been the engine that drives innovation and product development in the United States for over a century. During the last 50 years, technician training has comprised a combination of two-year academic programs, internships and apprentice training, and extensive On-the-Job Training (OJT). Recently, and especially in Silicon Valley, technicians have four-year college degrees, as well as relevant hands-on training. Characterization in general, and microscopy in particular, is an essential tool in process development, manufacturing and QA/QC, and failure analysis. Training for a broad range of skills and practice is challenging, especially for community colleges. Workforce studies (SRI/Boeing) suggest that even four year colleges often do not provide the relevant training and experience in laboratory skills, especially design of experiments and analysis of data. Companies in high-tech further report difficulty in finding skilled labor, especially with industry specific experience. Foothill College, in partnership with UCSC, SJSU, and NASA-Ames, has developed a microscopy training program embedded in a research laboratory, itself a partnership between university and government, providing hands-on experience in advanced instrumentation, experimental design and problem solving, with real-world context from small business innovators, in an environment called `the collaboratory'. The program builds on AFM-SEM training at Foothill, and provides affordable training in FE-SEM and TEM through a cost recovery model. In addition to instrument and engineering training, the collaboratory also supports academic and personal growth through a multiplayer social network of students, faculty, researchers, and innovators.

Four-Cylinder Stirling-Engine Computer Program

Science.gov (United States)

Daniele, C. J.; Lorenzo, C. F.

1986-01-01

Computer program developed for simulating steady-state and transient performance of four-cylinder Stirling engine. In model, four cylinders interconnected by four working spaces. Each working space contains seven volumes: one for expansion space, heater, cooler, and compression space and three for regenerator. Thermal time constant for regenerator mass associated with each regenator gas volume. Former code generates results very quickly, since it has only 14 state variables with no energy equation. Current code then used to study various aspects of Stirling engine in much more detail. Program written in FORTRAN IV for use on IBM 370 computer.

The AGINAO Self-Programming Engine

Science.gov (United States)

Skaba, Wojciech

2013-01-01

The AGINAO is a project to create a human-level artificial general intelligence system (HL AGI) embodied in the Aldebaran Robotics' NAO humanoid robot. The dynamical and open-ended cognitive engine of the robot is represented by an embedded and multi-threaded control program, that is self-crafted rather than hand-crafted, and is executed on a simulated Universal Turing Machine (UTM). The actual structure of the cognitive engine emerges as a result of placing the robot in a natural preschool-like environment and running a core start-up system that executes self-programming of the cognitive layer on top of the core layer. The data from the robot's sensory devices supplies the training samples for the machine learning methods, while the commands sent to actuators enable testing hypotheses and getting a feedback. The individual self-created subroutines are supposed to reflect the patterns and concepts of the real world, while the overall program structure reflects the spatial and temporal hierarchy of the world dependencies. This paper focuses on the details of the self-programming approach, limiting the discussion of the applied cognitive architecture to a necessary minimum.

Intervention to Improve Engineering Self-Efficacy and Sense of Belonging of First-Year Engineering Students

Science.gov (United States)

Jordan, Kari L.

The percentage of bachelor's degrees in STEM awarded to women and underrepresented minority students needs to increase dramatically to reach parity with their majority counterparts. While three key underrepresented minority (URM) groups, African Americans, Hispanic/Latinos, and Native Americans constitute some 30 percent of the overall undergraduate student population in the United States, the share of engineering degrees earned by members of these groups declines as degree level increases. Underrepresented minority students accounted for about 12% of engineering bachelor's degrees awarded in 2009, 7% of master's degrees and 3% of doctorates (NSF Science Resource Statistics, 2009). The percent in engineering has been steadily decreasing, while overall participation in higher education among these groups has increased considerably. Keeping those thoughts in mind it is important to examine the historical theories and frameworks that will help us not only understand why underrepresented minority students pursue and persist in STEM majors in low numbers, but to also develop interventions to improve the alarming statistics that hamper engineering diversity. As indicated by our past two U.S. Presidents, there has been an increased discussion on the national and state level regarding the number of students entering engineering disciplines in general and underrepresented minority students in particular. Something happens between a student's freshman year and the point they decide to either switch their major or drop out of school altogether. Some researchers attribute the high dropout rate of underrepresented minority students in engineering programs to low engineering self-efficacy (e.g. Jordan et al., 2011). A student's engineering self-efficacy is his/her belief that he/she can successfully navigate the engineering curriculum and eventually become a practicing engineer. A student's engineering self-efficacy is formed by mastery experiences, vicarious experiences, his

The Development of a Project-Based Collaborative Technical Writing Model Founded on Learner Feedback in a Tertiary Aeronautical Engineering Program

Science.gov (United States)

Tatzl, Dietmar; Hassler, Wolfgang; Messnarz, Bernd; Fluhr, Holger

2012-01-01

The present article describes and evaluates collaborative interdisciplinary group projects initiated by content lecturers and an English-as-a-Foreign-Language (EFL) instructor for the purpose of teaching technical writing skills in an aeronautical engineering degree program. The proposed technical writing model is assessed against the results of a…

Academic Support Program in the Faculty of Agricultural and Forestry Engineering of the University of Cordoba (Spain)

Science.gov (United States)

Castro, Sergio; Navarro, Rafael M.; Camacho, Emilio; Gallardo, Rosa; García-Ferrer, Alfonso; Pérez-Marín, M. Dolores; Peña, Adolfo; Taguas, Encarnación V.

2014-05-01

The incorporation of new students to undergraduate degrees is performed in different stages through a long, sequential enrollment process. The student integration to the new context of higher education including group work and new teaching methodologies lead to notable adaptation difficulties to this new educational environment. In fact, the highest rate of student failure in the Bachelor degree usually happens during the first courses. The Unit of Quality Evaluation/Monitoring of School of Agricultural and Forest Engineering (ETSIAM) has detected that these failure rates at first and second degree course may be reduced through the involvement of students in a support learning process, by increasing their skills and motivation as well as the contact with the University environment in the context of their future professional horizon. In order to establish a program of this type, it has been launched an Academic Support Program (ASP) at the ETSIAM. This program aims to achieve and reinforce the basic academic and personal skills/competences require by the Bologna's process (BC) and specific competences of the engineers on the area of Agriculture and Forestry in the European context. The ASP includes diferent bloks of seminars, lectures, collaborative work and discussion groups among students, professionals, professors and researchers and it has been designed based on these competences and tranversal contents in both degrees. These activities are planned in a common time for both degrees, out of teaching classes. In addition, a virtual space in Moodle has been created for discussion forums and preparation activities. Additional information about schedules, speakers and companies, presentations and other material are also provided. In the preliminary implementation of the ASP, we will present the results corresponding to the first year of this academic support program. We have conducted a survey among the students in order to have a first feedback about the impact of

U.S. Engineering Degrees for Improving South Indian Graduate Students' Marriage and Dowry Options

Science.gov (United States)

Yakaboski, Tamara; Sheridan, Robyn Stout; Dade, Kristin

2014-01-01

The article examines improved marriage opportunities as an unexplored motivator for pursuing international education via U.S. graduate engineering degrees and stresses the need to centralize gender in analyzing academic mobility and international education. This interdisciplinary qualitative study explores how South Indian men and women's…

A Program on Biochemical and Biomedical Engineering.

Science.gov (United States)

San, Ka-Yiu; McIntire, Larry V.

1989-01-01

Presents an introduction to the Biochemical and Biomedical Engineering program at Rice University. Describes the development of the academic and enhancement programs, including organizational structure and research project titles. (YP)

Teaching Radioactive Waste Management in an Undergraduate Engineering Program - 13269

Energy Technology Data Exchange (ETDEWEB)

Ikeda, Brian M. [Faculty of Energy Systems and Nuclear Science, University of Ontario Institute of Technology, 2000 Simcoe Street North, Oshawa, Ontario L1H 7K4 (Canada)

2013-07-01

The University of Ontario Institute of Technology is Ontario's newest university and the only one in Canada that offers an accredited Bachelor of Nuclear Engineering (Honours) degree. The nuclear engineering program consists of 48 full-semester courses, including one on radioactive waste management. This is a design course that challenges young engineers to develop a fundamental understanding of how to manage the storage and disposal of various types and forms of radioactive waste, and to recognize the social consequences of their practices and decisions. Students are tasked with developing a major project based on an environmental assessment of a simple conceptual design for a waste disposal facility. They use collaborative learning and self-directed exploration to gain the requisite knowledge of the waste management system. The project constitutes 70% of their mark, but is broken down into several small components that include, an environmental assessment comprehensive study report, a technical review, a facility design, and a public defense of their proposal. Many aspects of the project mirror industry team project situations, including the various levels of participation. The success of the students is correlated with their engagement in the project, the highest final examination scores achieved by students with the strongest effort in the project. (authors)

Teaching Radioactive Waste Management in an Undergraduate Engineering Program - 13269

International Nuclear Information System (INIS)

Ikeda, Brian M.

2013-01-01

The University of Ontario Institute of Technology is Ontario's newest university and the only one in Canada that offers an accredited Bachelor of Nuclear Engineering (Honours) degree. The nuclear engineering program consists of 48 full-semester courses, including one on radioactive waste management. This is a design course that challenges young engineers to develop a fundamental understanding of how to manage the storage and disposal of various types and forms of radioactive waste, and to recognize the social consequences of their practices and decisions. Students are tasked with developing a major project based on an environmental assessment of a simple conceptual design for a waste disposal facility. They use collaborative learning and self-directed exploration to gain the requisite knowledge of the waste management system. The project constitutes 70% of their mark, but is broken down into several small components that include, an environmental assessment comprehensive study report, a technical review, a facility design, and a public defense of their proposal. Many aspects of the project mirror industry team project situations, including the various levels of participation. The success of the students is correlated with their engagement in the project, the highest final examination scores achieved by students with the strongest effort in the project. (authors)

Advanced Materials Development Program: Ceramic Technology for Advanced Heat Engines program plan, 1983--1993

Energy Technology Data Exchange (ETDEWEB)

1990-07-01

The purpose of the Ceramic Technology for Advanced Heat Engines (CTAHE) Project is the development of an industrial technology base capable of providing reliable and cost-effective high temperature ceramic components for application in advanced heat engines. There is a deliberate emphasis on industrial'' in the purpose statement. The project is intended to support the US ceramic and engine industries by providing the needed ceramic materials technology. The heat engine programs have goals of component development and proof-of-concept. The CTAHE Project is aimed at developing generic basic ceramic technology and does not involve specific engine designs and components. The materials research and development efforts in the CTAHE Project are focused on the needs and general requirements of the advanced gas turbine and low heat rejection diesel engines. The CTAHE Project supports the DOE Office of Transportation Systems' heat engine programs, Advanced Turbine Technology Applications (ATTAP) and Heavy Duty Transport (HDT) by providing the basic technology required for development of reliable and cost-effective ceramic components. The heat engine programs provide the iterative component design, fabrication, and test development logic. 103 refs., 18 figs., 11 tabs.

Master of Engineering Energy Systems Engineering Program: Smart Campus Energy Systems Demonstration DE-SC0005523

Energy Technology Data Exchange (ETDEWEB)

Dodge, Martha [Lehigh Univ., Bethlehem, PA (United States); Coulter, John [Lehigh Univ., Bethlehem, PA (United States)

2014-09-25

Program Purpose and Position: The mission of the Master of Engineering in Energy Systems Engineering program is to invigorate the pipeline of new engineering graduates interested in energy oriented careers and thus produce a new generation of technical leaders for the energy and power industries. Over the next decade, nearly 50% of the skilled workers and technical leaders in the gas and electric utility industries will retire -- a much larger void than the current available and qualified professionals could fill [CEWD, 2012 survey]. The Masters of Engineering in Energy System Engineering program provides an opportunity for cross-discipline education for graduates interested in a career in the energy industry. It focuses on electric power and the challenges and opportunities to develop a sustainable, reliable and resilient system that meets human needs in an increasingly sustainable manner through the use of environmentally sound energy resources and delivery. Both graduates and employers benefit from a well-trained professional workforce that is ready to hit the road running and be immediately productive in meeting these challenges, through this innovative and unique program.

Current Trends in Communication Graduate Degrees: Survey of Communications, Advertising, PR, and IMC Graduate Programs

Science.gov (United States)

Quesenberry, Keith A.; Coolsen, Michael K.; Wilkerson, Kristen

2015-01-01

A survey of 61 master's degree advertising programs reveals significant trends in program titles, curriculum design, course delivery, and students served. The results provide insight for current and planned master's degree programs as research predicts a continued increase in demand for master's education over the next decade. Survey results are…

Pathways to Science and Engineering Bachelor's Degrees for Men and Women.

Science.gov (United States)

Legewie, Joscha; DiPrete, Thomas A

2014-02-18

Despite the striking reversal of the gender gap in educational attainment and the near-gender parity in math performance, women pursue science and engineering (S/E) degrees at much lower rates than their male peers do. Current efforts to increase the number of women in these fields focus on different life-course periods but lack a clear understanding of the importance of these periods and how orientations toward S/E fields develop over time. In this article, we examine the gendered pathways to a S/E bachelor's degree from middle school to high school and college based on a representative sample from the 1973 to 1974 birth cohort. Using a counterfactual decomposition analysis, we determine the relative importance of these different life-course periods and thereby inform the direction of future research and policy. Our findings confirm previous research that highlights the importance of early encouragement for gender differences in S/E degrees, but our findings also attest to the high school years as a decisive period for the gender gap, while challenging the focus on college in research and policy. Indeed, if female high school seniors had the same orientation toward and preparation for S/E fields as their male peers, the gender gap in S/E degrees would be closed by as much as 82 percent.

A fusion engineering program for Canada

International Nuclear Information System (INIS)

Billington, I.J.

In 1980 the National Research Council asked DSMA ATCON Ltd., in collaboration with Ontario Hydro, the University of Toronto, and McMaster University, to evaluate concepts for a national fusion engineering program, to define a facility that could be constructed in Canada to meet the program goals, and to suggest a strategy for encouraging industrial participation. The central element of the proposed fusion engineering and development program is tritium technology, with additional emphasis on the broader field of all hydrogen isotopes and their interactions with materials. The Canadian program in the initial phase would concentrate on fusion fuel systems, materials development, equipment development, and safety and the environment. A preliminary concept for the facility required has been developed, and key organizational activities identified. The total program costs should be $1 million in the first year, rising to a steady state of $5 million from the fourth year onward. The capital cost of the research facility is estimated to be $20 million spread over three years, and its operating budget around $7 million. The program as envisioned would make use of Canada's existing tritium resources and handling experience to contribute to worldwide fusion research

Students' Desired and Experienced Levels of Connectivity to an Asynchronous, Online, Distance Degree Program

Science.gov (United States)

Schroeder, Shawnda; Baker, Mary; Terras, Katherine; Mahar, Patti; Chiasson, Kari

2016-01-01

This study examined graduate students' desired and experienced levels of connectivity in an online, asynchronous distance degree program. Connectivity was conceptualized as the students' feelings of community and involvement, not their level of access to the Internet. Graduate students enrolled in a distance degree program were surveyed on both…

Building an Ecosystem for a New Engineering Program

Science.gov (United States)

Grebski, Wieslaw; Grebski, Michalene Eva

2018-06-01

Penn State Hazleton has recently developed and implemented a new Engineering program with a focus on energy efficiency and energy sustainability. To accelerate the implementation cycle of the program, it was necessary to very rapidly create and establish the components of an ecosystem needed for the Engineering program to prosper and grow. This paper describes the individual components of the ecosystem as well as the methods used to establish them. The paper also discusses the different initiatives to increase enrollment as well as placement rates for graduates. Continuous quality improvement procedure applied to maintain the quality of the program is also being discussed.

Innovative Mobile Robot Method: Improving the Learning of Programming Languages in Engineering Degrees

Science.gov (United States)

Ortiz, Octavio Ortiz; Pastor Franco, Juan Ángel; Alcover Garau, Pedro María; Herrero Martín, Ruth

2017-01-01

This paper describes a study of teaching a programming language in a C programming course by having students assemble and program a low-cost mobile robot. Writing their own programs to define the robot's behavior raised students' motivation. Working in small groups, students programmed the robots by using the control structures of structured…

The fully integrated biomedical engineering programme at Eindhoven University of Technology.

Science.gov (United States)

Slaaf, D W; van Genderen, M H P

2009-05-01

The development of a fully integrated biomedical engineering programme (life sciences included from the start) is described. Details are provided about background, implementation, and didactic concept: design centred learning combined with courses. The curriculum has developed into a bachelor-master's programme with two different master's degrees: Master's Degree in Biomedical Engineering and Master's Degree in Medical Engineering. Recently, the programme has adopted semester programming, has included a major and minor in the bachelor's degree phase, and a true bachelor's degree final project. Details about the programme and data about where graduates find jobs are provided in this paper.

Labour perspectives of engineering degrees in the European Higher Education Area (EHEA): a case of study in the University of Cordoba (Spain)

Science.gov (United States)

Taguas, E. V.; Redel, M. D.; Pérez, R.; Peña, A.

2009-04-01

The Bologna process is reaching its final stages and is causing controversy among students. The adaptation of European universities to the European Higher Education Area (EHEA) entails not only the modification of curricular programmes and the nomenclature and duration of degrees, but also the incorporation of new teaching strategies aimed at ensuring that students acquire transversal skills and aptitudes and at increasing student participation in the teaching-learning process. A number of surveys have been carried out during the last few courses among students doing degrees in engineering (Industrial Engineering, Agronomy Engineering and Forestry Engineering). These surveys include questions on their knowledge of Bologna process, its advantages and drawbacks, their opinion about optional masters or doctorate degrees, what perspectives their degrees have on the labour market and suggestions for improvement. Although the different degrees showed notable differences, the content of EHEA is well-known by less than 30% of students, while 40% of them state they know about their perspectives on the labour market. The main advantages of EHEA were related to the improvement of practical knowledge in the subjects, the recognition of degrees in Europe and wider working opportunities. The main drawbacks pointed out were worse and shorter training periods, higher costs and fiercer competition between different degrees. In addition, they suggested that the new degrees are better adjusted to the demands of the labour market. 60% and 40% of them, respectively, approved of Masters degrees and PhDs. These features should be taken into account to organize and improve the contents of the degrees as well as to involve the students in the future of University education.

An Assessment of Research-Doctorate Programs in the United States: Engineering.

Science.gov (United States)

Jones, Lyle V., Ed.; And Others

The quality of doctoral-level chemical engineering (N=79), civil engineering (N=74), electrical engineering (N=91), and mechanical engineering (N=82) programs at United States universities was assessed, using 16 measures. These measures focused on variables related to: (1) program size; (2) characteristics of graduates; (3) reputational factors…

Using "Kaizen" to Improve Graduate Business School Degree Programs

Science.gov (United States)

Emiliani, M. L.

2005-01-01

Purpose: To illustrate the applicability of "kaizen" in higher education. Design/methodology/approach: "Kaizen" process was used for ten courses contained in a part-time executive MS degree program in management. Findings: "Kaizen" was found to be an effective process for improving graduate business school courses and the value proposition for…

75 FR 22576 - Minority Science and Engineering Improvement Program

Science.gov (United States)

2010-04-29

... DEPARTMENT OF EDUCATION [CFDA No. 84.120A] Minority Science and Engineering Improvement Program... the fiscal year (FY) 2009 grant slate for the Minority Science and Engineering Improvement Program. SUMMARY: The Secretary intends to use the grant slate developed in FY 2009 for the Minority Science and...

Basic Gasoline Engine Mechanics. Florida Vocational Program Guide.

Science.gov (United States)

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This packet contains a program guide and Career Merit Achievement Plan (Career MAP) for the implementation of a basic gasoline engine mechanics program in Florida secondary and postsecondary schools. The program guide describes the program content and structure, provides a program description, lists job titles under the program, and includes a…

[Public health competencies and contents in pharmacy degree programs in Spanish universities].

Science.gov (United States)

Lumbreras, Blanca; Davó-Blanes, María Carmen; Vives-Cases, Carmen; Bosch, Félix

2015-01-01

To identify public health core competencies and contents in pharmacy degrees at a meeting of public health lecturers in pharmacy degrees from various public and private universities. The first Meeting of the Forum of University Teaching Staff in Pharmacy Degrees was held at the Faculty of Medicine in the Complutense University, Madrid, Spain on the 19(th) and 20(th) of November 2013. The meeting was attended by 17 lecturers. Participants brought their own teaching programs and were given two previous studies on public health competencies for analysis of public health contents and competencies in pharmacy degrees. Working groups were formed and the results were shared. The highest number of core competencies was identified in the following functions: "Assessment of the population's health needs" and "Developing health policies". The final program included basic contents organized into 8 units: Concept of Public Health, Demography, Epidemiological Method, Environment and Health, Food Safety, Epidemiology of Major Health Problems, Health Promotion and Education, and Health Planning and Management. Representation of almost all the Spanish Pharmacy Faculties and the consensus reached in the description of competences and program contents will greatly improve the quality of teaching in this area. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.

Development of Nuclear Engineering Educational Program at Ibaraki University with Regional Collaboration

Science.gov (United States)

Matsumura, Kunihito; Kaminaga, Fumito; Kanto, Yasuhiro; Tanaka, Nobuatsu; Saigusa, Mikio; Kikuchi, Kenji; Kurumada, Akira

The College of Engineering, Ibaraki University is located at the Hitachi city, in the north part of Ibaraki prefecture. Hitachi and Tokai areas are well known as concentration of advanced technology center of nuclear power research organizations. By considering these regional advantages, we developed a new nuclear engineering educational program for students in the Collage of Engineering and The Graduate School of Science and Engineering of Ibaraki University. The program is consisted of the fundamental lectures of nuclear engineering and nuclear engineering experiments. In addition, several observation learning programs by visiting cooperative organizations are also included in the curriculum. In this paper, we report about the progress of the new educational program for nuclear engineering in Ibaraki University.

The reactor engineer program: creating a new workforce

International Nuclear Information System (INIS)

Summers, R.

1993-01-01

As the number of nuclear engineering schools continues to shrink across the U.S., talented professional engineers for the nuclear energy community must increasingly be found elsewhere. To meet its needs, therefore, the Office of Nuclear Reactor Regulation (NRR) established an Intern Program to bring new talent into the NRC. The two-year program includes 17 weeks of technical training, and 4 or 5 rotational assignments, including at least 4 months at a commercial nuclear power plant site. The key to the success of the program is the full support of NRR high-level management

Application of Statistics in Engineering Technology Programs

Science.gov (United States)

Zhan, Wei; Fink, Rainer; Fang, Alex

2010-01-01

Statistics is a critical tool for robustness analysis, measurement system error analysis, test data analysis, probabilistic risk assessment, and many other fields in the engineering world. Traditionally, however, statistics is not extensively used in undergraduate engineering technology (ET) programs, resulting in a major disconnect from industry…

Dual Enrollment Academy Programs

Science.gov (United States)

Gonzalez, Nicolas; Chavez, Guadalupe

2009-01-01

Dual Enrollment Engineering (DEEA) and Medical Science (DEMSA) Academies are two-year dual enrollment programs for high school students. Students explore engineering and medical careers through college coursework. Students prepare for higher education in engineering and medical fields while completing associate degrees in biology or engineering…

Reformulation of Engineering Education at Undergraduate Level in the Faculdad de Ingenieria y Ciencias Hidricas Universidad Nacional del Litoral--Water Resources and Engineering Degrees.

Science.gov (United States)

Theiler, Julio; Isla, Miguel; Arrillaga, Hugo; Ceirano, Eduardo; Lozeco, Cristobal

This paper explains the educational changes in the Water Resources Engineering program offered by the Universidad Nacional del Litoral in Santa Fe, Argentina, for the last 20 years at the undergraduate level. The need for modernizing the engineering teaching program occurred due to changes in the social system in which the concepts of development…

Explaining Academic Success in Engineering Degree Programs : Do Female and Male Students Differ?

NARCIS (Netherlands)

Kamphorst, Jan C.; Hofman, W.H. Adriaan; Jansen, Ellen P.W.A.; Terlouw, Cees

2015-01-01

Background In Dutch engineering education, female students outperform male students. Using an interactionalist framework, this study explores factors that contribute to this gender-based difference. Purpose This study aims to answer two questions: Do female and male students differ in background

Elementary Education Program for Engineering by Dual System of Workshop and Teaching Program with Practical Subject

Science.gov (United States)

Hara, Toshitsugu

Elementary education program for engineering by the dual system combined with workshop program and teaching program with practical subject was discussed. The dual system which consists of several workshop programs and fundamental subjects (such as mathematics, English and physics) with practical material has been performed for the freshmen. The elementary workshop program (primary course) has four workshops and the related lectures. Fundamental subjects are taught with the practical or engineering texts. English subjects are taught by specified teachers who have ever worked in engineering field with English. The dual system was supported by such systems as the center for success initiative and the English education center.

Law-Based Degree Programs in Business and Their Departments: What's in a Name? (A Comprehensive Study of Undergraduate Law-Based Degrees in AACSB-Accredited Universities)

Science.gov (United States)

Miller, Carol J.; Crain, Susan J.

2007-01-01

This study examines undergraduate law-based degree programs in the 404 U.S. universities with undergraduate degrees in business that had Association to Advance Collegiate Schools of Business (AACSB) accreditation in 2005. University Web sites were used to identify and compare law-based undergraduate programs inside business to law-related programs…

Wind Energy Workforce Development: Engineering, Science, & Technology

Energy Technology Data Exchange (ETDEWEB)

Lesieutre, George A.; Stewart, Susan W.; Bridgen, Marc

2013-03-29

Broadly, this project involved the development and delivery of a new curriculum in wind energy engineering at the Pennsylvania State University; this includes enhancement of the Renewable Energy program at the Pennsylvania College of Technology. The new curricula at Penn State includes addition of wind energy-focused material in more than five existing courses in aerospace engineering, mechanical engineering, engineering science and mechanics and energy engineering, as well as three new online graduate courses. The online graduate courses represent a stand-alone Graduate Certificate in Wind Energy, and provide the core of a Wind Energy Option in an online intercollege professional Masters degree in Renewable Energy and Sustainability Systems. The Pennsylvania College of Technology erected a 10 kilowatt Xzeres wind turbine that is dedicated to educating the renewable energy workforce. The entire construction process was incorporated into the Renewable Energy A.A.S. degree program, the Building Science and Sustainable Design B.S. program, and other construction-related coursework throughout the School of Construction and Design Technologies. Follow-on outcomes include additional non-credit opportunities as well as secondary school career readiness events, community outreach activities, and public awareness postings.

National Hispanic Bilingual Engineering Program (NHBEP)

Energy Technology Data Exchange (ETDEWEB)

Cruz, M.

2000-10-31

This report describes program goals, activities, processes, benefits for the profession of engineering and for the project participants, coordination, and impact of NHBEP throughout the three years of implementation.

Training Program for Practical Engineering Design through the Collaboration with Regional Companies

Science.gov (United States)

Gofuku, Akio; Tabata, Nobuhisa; Tomita, Eiji; Funabiki, Nobuo

An education program to bring up engineering design capabilities through long-term internship by the collaboration with regional companies has been put in practice for five years. The program is composed of two types of long-term internships and several lectures for patent systems and engineering ethics. This paper describes the outline of the program, educational effects, and our experiences. The program was improved into two educational programs in 2011. The one is a special course to educate engineers and scientists who can lead the technologies of their domains. The other is a long-term internship program for master students in engineering divisions of graduate school. This paper also describes the current activities of the latter program.

Multidisciplinary Graduate Education in Bioprocess Engineering

Energy Technology Data Exchange (ETDEWEB)

Mark A. Eiteman

2006-04-18

graduate students in several engineering and science degree programs. Other significant developments have arisen as direct or indirect consequences of this project. The University of Georgia has established a B.S. Biochemical Engineering degree and an M.S. Biochemical Engineering degree. A strong component of these degree programs is education toward a biobased economy. We will integrate particularly positive components of this project (such as the distinguished lecture series) into these degree programs. The University of Georgia is establishing a Center for Biorefining and Carbon Cycling. This multidisciplinary Center houses a pilot scale biorefinery, comprising a pyrolysis unit and an ethanol plant. Together with new faculty positions that are currently being advertised, this project has encouraged the University of Georgia to assume a leadership role in the preparation of students in the biobased industries of the future.

Reservoir Engineering Management Program

Energy Technology Data Exchange (ETDEWEB)

Howard, J.H.; Schwarz, W.J.

1977-12-14

The Reservoir Engineering Management Program being conducted at Lawrence Berkeley Laboratory includes two major tasks: 1) the continuation of support to geothermal reservoir engineering related work, started under the NSF-RANN program and transferred to ERDA at the time of its formation; 2) the development and subsequent implementation of a broad plan for support of research in topics related to the exploitation of geothermal reservoirs. This plan is now known as the GREMP plan. Both the NSF-RANN legacies and GREMP are in direct support of the DOE/DGE mission in general and the goals of the Resource and Technology/Resource Exploitation and Assessment Branch in particular. These goals are to determine the magnitude and distribution of geothermal resources and reduce risk in their exploitation through improved understanding of generically different reservoir types. These goals are to be accomplished by: 1) the creation of a large data base about geothermal reservoirs, 2) improved tools and methods for gathering data on geothermal reservoirs, and 3) modeling of reservoirs and utilization options. The NSF legacies are more research and training oriented, and the GREMP is geared primarily to the practical development of the geothermal reservoirs. 2 tabs., 3 figs.

Understanding the Front-end of Large-scale Engineering Programs

DEFF Research Database (Denmark)

Lucae, Sebastian; Rebentisch, Eric; Oehmen, Josef

2014-01-01

Large engineering programs like sociotechnical infrastructure constructions of airports, plant constructions, or the development of radically innovative, high-tech industrial products such as electric vehicles or aircraft are affected by a number of serious risks, and subsequently commonly suffer...... from large cost overruns. Significant problems in program execution can be traced back to practices performed, or more frequently not performed, in the so-called “fuzzy front end” of the program. The lack of sufficient and effective efforts in the early stages of a program can result in unstable......, unclear and incomplete requirements, unclear roles and responsibilities within the program organization, insufficient planning, and unproductive tensions between program management and systems engineering. This study intends to clarify the importance of up-front planning to improve program performance...

Short educational programs in optical design and engineering

Science.gov (United States)

Voznesenskaya, Anna; Romanova, Galina; Bakholdin, Alexey; Tolstoba, Nadezhda; Ezhova, Kseniia

2016-09-01

Globalization and diversification of education in optical engineering causes a number of new phenomena in students' learning paths. Many students have an interest to get some courses in other universities, to study in international environment, to broaden not only professional skills but social links and see the sights as well etc. Participation in short educational programs (e.g. summer / winter schools, camps etc.) allows students from different universities to learn specific issues in their or in some neighbor field and also earn some ECTS for the transcript of records. ITMO University provides a variety of short educational programs in optical design and engineering oriented for different background level, such are: Introduction into optical engineering, Introduction into applied and computer optics, Optical system design, Image modeling and processing, Design of optical devices and components. Depending on students' educational background these programs are revised and adopted each time. Usually the short educational programs last 4 weeks and provide 4 ECTS. The short programs utilize a set of out-of date educational technologies like problem-based learning, case-study and distance-learning and evaluation. Practically, these technologies provide flexibility of the educational process and intensive growth of the learning outcomes. Students are satisfied with these programs very much. In their feedbacks they point a high level of practical significance, experienced teaching staff, scholarship program, excellent educational environment, as well as interesting social program and organizational support.

Hydrocarbon emissions from gas engine CHP-units. 2011 measurement program

Energy Technology Data Exchange (ETDEWEB)

Van Dijk, G.H.J. [KEMA, Arnhem (Netherlands)

2012-06-15

In December 2009, the Ministry of Infrastructure and Environment (IandM) issued the Decree on Emission Limits for Middle Sized Combustion Installations (BEMS). This decree imposes a first-time emission limit value (ELV) of 1500 mg C/m{sup 3}{sub o} at 3% O{sub 2} for hydrocarbons emitted by gas engines. IandM used the findings of two hydrocarbon emission measurement programs, executed in 2007 and 2009, as a guideline for this initial ELV. The programs did reveal substantial variation in the hydrocarbon emissions of the gas engines tested. This variation, and especially the uncertainty as to the role of engine and/or other parameters causing such variation, was felt to hamper further policy development. IandM therefore commissioned KEMA to perform follow-up measurements on ten gas engine CHP-units in 2011. Aim of this 2011 program is to assess hydrocarbon emission variation in relation to engine parameters and process conditions including maintenance status, and to atmospheric conditions. The 2011 program comprised two identical measurement sessions, one in spring and one in winter.

Help to new students of ICT Systems Engineering Degree at EPSEM-UPC: Mentoring

Directory of Open Access Journals (Sweden)

Roser Gorchs

2014-07-01

Full Text Available 120 800x600 New students at the Manresa School of Engineering (EPSEM, Escola Politècnica Superior d'Enginyeria de Manresa of the Universitat Politècnica de Catalunya (UPC are voluntarity provided with the mentoring service during their initial period at University. Mentoring gives academic, teaching and self-organizational support. It improves academic results and reduces the desertion of the studies. In particular, the mentor is an experimented learner which studies in the last year of his/her Degree. Here we expose such mentoring applied to ICT (Information, Communication and Technology Systems Engineering Degree at EPSEM, studies of new creation which are probably unique in Spain, and we also present a treatment and analysis of the performance and possible actions of continuous improvement. Normal 0 21 false false false CA X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";}

Pathways to Science and Engineering Bachelor’s Degrees for Men and Women

Directory of Open Access Journals (Sweden)

Joscha Legewie

2014-02-01

Full Text Available Despite the striking reversal of the gender gap in educational attainment and the near–gender parity in math performance, women pursue science and engineering (S/E degrees at much lower rates than their male peers do. Current efforts to increase the number of women in these fields focus on different life-course periods but lack a clear understanding of the importance of these periods and how orientations toward S/E fields develop over time. In this article, we examine the gendered pathways to a S/E bachelor’s degree from middle school to high school and college based on a representative sample from the 1973 to 1974 birth cohort. Using a counterfactual decomposition analysis, we determine the relative importance of these different life-course periods and thereby inform the direction of future research and policy. Our findings confirm previous research that highlights the importance of early encouragement for gender differences in S/E degrees, but our findings also attest to the high school years as a decisive period for the gender gap, while challenging the focus on college in research and policy. Indeed, if female high school seniors had the same orientation toward and preparation for S/E fields as their male peers, the gender gap in S/E degrees would be closed by as much as 82 percent.

A unique degree program for pre-pharmacy education: An undergraduate degree in pharmaceutical sciences.

Science.gov (United States)

Jafari, Mahtab

2018-02-01

Within the coming decade, the demand for well-trained pharmacists is expected to only increase, especially with the aging of the United States (US) population. To help fill this growing demand, the University of California, Irvine (UCI) aims to offer a unique pre-pharmacy degree program and has developed a Bachelor of Science (BS) degree in Pharmaceutical Sciences to help achieve this goal. In this commentary, we share our experience with our curriculum and highlight its features in an effort to encourage other institutions to enhance the learning experience of their pre-pharmacy students. The efforts of the UCI Department of Pharmaceutical Sciences has resulted in UCI being consistently ranked as one of the top feeder institutions by the Pharmacy College Application Service (PharmCAS) in recent years. The UCI Pharmaceutical Sciences Bachelor of Science offers a unique pre-pharmacy educational experience in an effort to better prepare undergraduates for the rigors of the doctorate of pharmacy curriculum. Copyright © 2017. Published by Elsevier Inc.

A Summer Leadership Development Program for Chemical Engineering Students

Science.gov (United States)

Simpson, Annie E.; Evans, Greg J.; Reeve, Doug

2012-01-01

The Engineering Leaders of Tomorrow Program (LOT) is a comprehensive curricular, co-curricular, extra-curricular leadership development initiative for engineering students. LOT envisions: "an engineering education that is a life-long foundation for transformational leaders and outstanding citizens." Academic courses, co-curricular certificate…

African Social Studies Program-1, 1988-89. Final Report. A Master's Degree Program for African Social Studies Leaders.

Science.gov (United States)

Indiana Univ., Bloomington.

This paper presents the final report on a project that brought African social studies education leaders to Indiana University (Bloomington) to take part in a Master's Degree program. The report contains a brief history of the program, a description of the program, a discussion of issues relating to acculturation, an evaluation, a list of…

Early Engagement in Course-Based Research Increases Graduation Rates and Completion of Science, Engineering, and Mathematics Degrees

Science.gov (United States)

Rodenbusch, Stacia E.; Hernandez, Paul R.; Simmons, Sarah L.; Dolan, Erin L.

2016-01-01

National efforts to transform undergraduate biology education call for research experiences to be an integral component of learning for all students. Course-based undergraduate research experiences, or CUREs, have been championed for engaging students in research at a scale that is not possible through apprenticeships in faculty research laboratories. Yet there are few if any studies that examine the long-term effects of participating in CUREs on desired student outcomes, such as graduating from college and completing a science, technology, engineering, and mathematics (STEM) major. One CURE program, the Freshman Research Initiative (FRI), has engaged thousands of first-year undergraduates over the past decade. Using propensity score–matching to control for student-level differences, we tested the effect of participating in FRI on students’ probability of graduating with a STEM degree, probability of graduating within 6 yr, and grade point average (GPA) at graduation. Students who completed all three semesters of FRI were significantly more likely than their non-FRI peers to earn a STEM degree and graduate within 6 yr. FRI had no significant effect on students’ GPAs at graduation. The effects were similar for diverse students. These results provide the most robust and best-controlled evidence to date to support calls for early involvement of undergraduates in research. PMID:27252296

Results of a Master's degree program for high-school teachers

Science.gov (United States)

Cocke, W. J.

1993-05-01

Starting in the summer of 1990, the Astronomy Department at the University of Arizona began a 3-year summer program for upgrading the skills of high-school and middle-school science teachers. The program granted Master's degrees in Astronomy to the 33 teachers that completed the program this past summer. The teachers received tuition waivers and stipends to cover living expenses. The funding came mostly from the National Science Foundation, but the University of Arizona cost-shared at the 15% level. About half of the teachers were from Arizona, and the rest came from out-of-state. Although minorities were encouraged to apply, we had few minority applicants, and there were no Afro-Americans and only one Hispanic in the program. The content of the courses was heavily slanted towards mathematics and the physical sciences. The math level went up to vector calculus and linear partial differential equations, and there was a heavy emphasis on physics and astrophysics. Astronomy turned out to be a good umbrella under which to strengthen the teachers' knowledge of the physical sciences. One of the weak points in the program was the pace at which we introduced new material to the teachers. The summer sessions were short and very intense, and the teachers often found themselves with insufficient time to digest the information. This was offset to some degree by the high rate of cooperative learning that the teachers exhibited. The program seems to have been a great success, and the teachers report that their higher level of understanding is very useful to them in the classroom, and the astronomy content provided an excellent source of new demonstrations and projects. We present the results of a final survey, in which we ask the teachers to summarize their thoughts about the program and its effectiveness.

SPORTS PHYSICAL THERAPY CURRICULA IN PHYSICAL THERAPIST PROFESSIONAL DEGREE PROGRAMS.

Science.gov (United States)

Mulligan, Edward P; DeVahl, Julie

2017-10-01

The specialty niche of sports physical therapy has grown at a significant rate over the past 40 years. Despite this growth there is little information or direction from the physical therapy education accreditation body or professional association to guide academic programs on the interest or necessity of this type of practice content in physical therapy professional degree programs. The purpose of this survey study is to report on the prevalence, attitudes, barriers, resources, and faculty expertise in providing required or elective sports physical therapy course work. Cross-sectional descriptive survey. A 57-item questionnaire with branching logic was distributed via a web-based electronic data capture tool to survey all Commission on Accreditation for Physical Therapy Education (CAPTE) accredited and candidate schools in the United States. Response data was analyzed to describe typical educational program profiles, faculty demographics, and correlational factors consistent with the presence or absence of specific sports physical therapy curricular content. Thirty one percent of the schools responded to the survey and the program demographics were consistent with all currently accredited schools in regards to their geography, Carnegie classification, and faculty and student size. Forty three percent of programs offered a required or elective course distinct to the practice of sports physical therapy. Descriptive information regarding the sequencing, curricular make-up, resources, and assessment of content competence is reported. The odds of providing this content nearly doubles for programs that have faculty with sports clinical specialist credentials, accredited sports residency curriculums, or state practice acts that allow sports venue coverage. This survey provides an initial overview of sports physical therapy educational efforts in professional physical therapy degree programs. The data can used to spur further discussion on the necessity, structure, and

Configuration management program plan for Hanford site systems engineering

International Nuclear Information System (INIS)

Hoffman, A.G.

1994-01-01

This plan establishes the integrated configuration management program for the evolving technical baseline developed through the systems engineering process. This configuration management program aligns with the criteria identified in the DOE Standard, DOE-STD-1073-93. Included are specific requirements for control of the systems engineering RDD-100 database, and electronic data incorporated in the database that establishes the Hanford site technical baseline

Transnational Degree Program Franchising and the Challenge of Commercial Franchisees

Science.gov (United States)

Juusola, Katariina; Rensimer, Lee

2018-01-01

Purpose: The purpose of this paper is to explore the interrelationship of branding practices and legitimacy-building of commercial degree program franchising within transnational higher education (TNHE). It aims to understand how commercial franchisees' branding practices employ discursive and symbolic strategies for building legitimacy, and how…

General aviation internal-combustion engine research programs at NASA-Lewis Research Center

Science.gov (United States)

Willis, E. A.

1978-01-01

An update is presented of non-turbine general aviation engine programs. The program encompasses conventional, lightweight diesel and rotary engines. It's three major thrusts are: (1) reduced SFC's; (2) improved fuels tolerance; and (3) reduced emissions. Current and planned future programs in such areas as lean operation, improved fuel management, advanced cooling techniques and advanced engine concepts, are described. These are expected to lay the technology base, by the mid to latter 1980's, for engines whose life cycle fuel costs are 30 to 50% lower than today's conventional engines.

Biodiesel unsaturation degree effects on diesel engine NOx emissions and cotton wick flame temperature

Directory of Open Access Journals (Sweden)

Abdullah Mohd Fareez Edzuan

2017-01-01

Full Text Available As compared with conventional diesel fuel, biodiesel has better lubricity and lower particulate matter (PM emissions however nitrogen oxides (NOx emissions generally increase in biodiesel-fuelled diesel engine. Strict regulation on NOx emissions is being implemented in current Euro 6 standard and it is expected to be tighter in next standard, thus increase of NOx cannot be accepted. In this study, biodiesel unsaturation degree effects on NOx emissions are investigated. Canola, palm and coconut oils are selected as the feedstock based on their unsaturation degree. Biodiesel blends of B20 were used to fuel a single cylinder diesel engine and exhaust emissions were sampled directly at exhaust tailpipe with a flue gas analyser. Biodiesel flame temperature was measured from a cotton wick burned in simple atmospheric conditions using a thermocouple. Fourier transform infrared (FTIR spectrometer was also used to identify the functional groups presence in the biodiesel blends. Oxygen content in biodiesel may promote complete combustion as the NOx emissions and flame temperatures were increased while the carbon monoxide (CO emissions were decreased for all biodiesel blends. It is interesting to note that the NOx emissions and flame temperatures were directly proportional with biodiesel unsaturation degree. It might be suggested that apart from excess oxygen and free radical formation, higher NOx emissions can also be caused by the elevated flame temperatures due to the presence of double bonds in unsaturated biodiesel.

Applying the system engineering approach to devise a master’s degree program in space technology in developing countries

Science.gov (United States)

Jazebizadeh, Hooman; Tabeshian, Maryam; Taheran Vernoosfaderani, Mahsa

2010-11-01

Although more than half a century is passed since space technology was first developed, developing countries are just beginning to enter the arena, focusing mainly on educating professionals. Space technology by itself is an interdisciplinary science, is costly, and developing at a fast pace. Moreover, a fruitful education system needs to remain dynamic if the quality of education is the main concern, making it a complicated system. This paper makes use of the System Engineering Approach and the experiences of developed countries in this area while incorporating the needs of the developing countries to devise a comprehensive program in space engineering at the Master's level. The needs of the developing countries as regards space technology education may broadly be put into two categories: to raise their knowledge of space technology which requires hard work and teamwork skills, and to transfer and domesticate space technology while minimizing the costs and maximizing its effectiveness. The requirements of such space education system, which include research facilities, courses, and student projects are then defined using a model drawn from the space education systems in universities in North America and Europe that has been modified to include the above-mentioned needs. Three design concepts have been considered and synthesized through functional analysis. The first one is Modular and Detail Study which helps students specialize in a particular area in space technology. Second is referred to as Integrated and Interdisciplinary Study which focuses on understanding and development of space systems. Finally, the third concept which has been chosen for the purpose of this study, is a combination of the other two, categorizing the required curriculum into seven modules, setting aside space applications. This helps students to not only specialize in one of these modules but also to get hands-on experience in a real space project through participation in summer group

Space Transportation Engine Program (STEP), phase B

Science.gov (United States)

1990-01-01

The Space Transportation Engine Program (STEP) Phase 2 effort includes preliminary design and activities plan preparation that will allow smooth and time transition into a Prototype Phase and then into Phases 3, 4, and 5. A Concurrent Engineering approach using Total Quality Management (TQM) techniques, is being applied to define an oxygen-hydrogen engine. The baseline from Phase 1/1' studies was used as a point of departure for trade studies and analyses. Existing STME system models are being enhanced as more detailed module/component characteristics are determined. Preliminary designs for the open expander, closed expander, and gas generator cycles were prepared, and recommendations for cycle selection made at the Design Concept Review (DCR). As a result of July '90 DCR, and information subsequently supplied to the Technical Review Team, a gas generator cycle was selected. Results of the various Advanced Development Programs (ADP's) for the Advanced Launch Systems (ALS) were contributive to this effort. An active vehicle integration effort is supplying the NASA, Air Force, and vehicle contractors with engine parameters and data, and flowing down appropriate vehicle requirements. Engine design and analysis trade studies are being documented in a data base that was developed and is being used to organize information. To date, seventy four trade studies were input to the data base.

Third Space Strategists: International Students Negotiating the Transition from Pathway Program to Postgraduate Coursework Degree

Science.gov (United States)

Benzie, Helen

2015-01-01

Pathway programs exist to prepare students for progression into university degrees but the transition experience for many students may not be as smooth as is suggested by the notion of the pathway. While attending a pathway program and at the beginning of their university degree, students may be in a third space, a liminal space where they engage…

Master’s Degree Programs of Camarines Norte State College, Philippines: Impact on Its Graduates

OpenAIRE

Godofredo E. Peteza, Jr.

2017-01-01

This research determined the impact of the master’s degree programs offered in the Graduate School such as Master in Business Administration, Master in Public Administration, Master in Management majors in Human Resource Management and Educational Planning and Management on its graduates from 2009 to 2013. Descriptive-survey method supplemented by interview was employed to identify specifically the profile of the graduates of master’s degree programs in terms of age, sex, civil ...

General aviation internal combustion engine research programs at NASA-Lewis Research Center

Science.gov (United States)

Willis, E. A.

1978-01-01

An update is presented of non-turbine general aviation engine programs underway at the NASA-Lewis Research Center in Cleveland, Ohio. The program encompasses conventional, lightweight diesel and rotary engines. Its three major thrusts are: (a) reduced SFC's; (b) improved fuels tolerance; and (c) reducing emissions. Current and planned future programs in such areas as lean operation, improved fuel management, advanced cooling techniques and advanced engine concepts, are described. These are expected to lay the technology base, by the mid to late 1980's, for engines whose life cycle fuel costs are 30 to 50% lower than today's conventional engines.

Nuclear Engine System Simulation (NESS). Volume 1: Program user's guide. Final Report

International Nuclear Information System (INIS)

Pelaccio, D.G.; Scheil, C.M.; Petrosky, L.J.

1993-03-01

A Nuclear Thermal Propulsion (NTP) engine system design analysis tool is required to support current and future Space Exploration Initiative (SEI) propulsion and vehicle design studies. Currently available NTP engine design models are those developed during the NERVA program in the 1960's and early 1970's and are highly unique to that design or are modifications of current liquid propulsion system design models. To date, NTP engine-based liquid design models lack integrated design of key NTP engine design features in the areas of reactor, shielding, multi-propellant capability, and multi-redundant pump feed fuel systems. Additionally, since the SEI effort is in the initial development stage, a robust, verified NTP analysis design tool could be of great use to the community. This effort developed an NTP engine system design analysis program (tool), known as the Nuclear Engine System Simulation (NESS) program, to support ongoing and future engine system and stage design study efforts. In this effort, Science Applications International Corporation's (SAIC) NTP version of the Expanded Liquid Engine Simulation (ELES) program was modified extensively to include Westinghouse Electric Corporation's near-term solid-core reactor design model. The ELES program has extensive capability to conduct preliminary system design analysis of liquid rocket systems and vehicles. The program is modular in nature and is versatile in terms of modeling state-of-the-art component and system options as discussed. The Westinghouse reactor design model, which was integrated in the NESS program, is based on the near-term solid-core ENABLER NTP reactor design concept. This program is now capable of accurately modeling (characterizing) a complete near-term solid-core NTP engine system in great detail, for a number of design options, in an efficient manner

Nuclear Engineering Academic Programs Survey, 2002 Data

International Nuclear Information System (INIS)

Oak Ridge Institute for Science and Education

2003-01-01

The survey includes degrees granted between July 1, 2001 and June 30, 2002. Enrollment information refers to the fall term 2002. Thirty-five academic programs were in the survey universe and all responded (100% response rate). One of the 35 programs reported that it was discontinued after the 2001-2002 academic year. Also, two programs were discontinued after the previous academic year (2000-2001) and were not included in 2002 survey

Defense programs business practices re-engineering QFD exercise

International Nuclear Information System (INIS)

Murray, C.; Halbleib, L.

1996-03-01

The end of the cold war has resulted in many changes for the Nuclear Weapons Complex (NWC). We now work in a smaller complex, with reduced resources, a smaller stockpile, and no new phase 3 weapons development programs. This new environment demands that we re-evaluate the way we design and produce nuclear weapons. The Defense Program (DP) Business Practices Re-engineering activity was initiated to improve the design and production efficiency of the DP Sector. The activity had six goals: (1) to identify DP business practices that are exercised by the Product Realization Process (PRP); (2) to determine the impact (positive, negative, or none) of these practices on defined, prioritized customer criteria; (3) to identify business practices that are candidates for elimination or re-engineering; (4) to select two or three business practices for re-engineering; (5) to re-engineer the selected business practices; and (6) to exercise the re-engineered practices on three pilot development projects. Business practices include technical and well as administrative procedures that are exercised by the PRP. A QFD exercise was performed to address (1)-(4). The customer that identified, defined, and prioritized the criteria to rate the business practices was the Block Change Advisory Group. Five criteria were identified: cycle time, flexibility, cost, product performance/quality, and best practices. Forty-nine business practices were identified and rated per the criteria. From this analysis, the group made preliminary recommendations as to which practices would be addressed in the re-engineering activity. Sixteen practices will be addressed in the re-engineering activity. These practices will then be piloted on three projects: (1) the Electronic Component Assembly (ECA)/Radar Project, (2) the B61 Mod 11, and (3) Warhead Protection Program (WPP)

Engineering Phase 2 and Phase 3 certification programs -- PUREX deactivation

International Nuclear Information System (INIS)

Walser, R.L.

1994-01-01

This document describes the training programs required to become a Phase 2 and Phase 3 certified engineer at PUREX during deactivation. With the change in mission, the PUREX engineering/certification training program is being revamped as discussed below. The revised program will be administered by PUREX Technical Training using existing courses and training materials. The program will comply with the requirements of the Department of Energy (DOE) order 5480.20A, ''Personnel Selection, Qualification, Training, and Staffing Requirements at DOE Reactor and Non-Reactor Nuclear Facilities.''

Engineering Phase 2 and Phase 3 certification programs -- PUREX deactivation

Energy Technology Data Exchange (ETDEWEB)

Walser, R.L.

1994-12-13

This document describes the training programs required to become a Phase 2 and Phase 3 certified engineer at PUREX during deactivation. With the change in mission, the PUREX engineering/certification training program is being revamped as discussed below. The revised program will be administered by PUREX Technical Training using existing courses and training materials. The program will comply with the requirements of the Department of Energy (DOE) order 5480.20A, ``Personnel Selection, Qualification, Training, and Staffing Requirements at DOE Reactor and Non-Reactor Nuclear Facilities.``

The Design of an Undergraduate Degree Program in Computer & Digital Forensics

Directory of Open Access Journals (Sweden)

Gary C. Kessler

2006-09-01

Full Text Available Champlain College formally started an undergraduate degree program in Computer & Digital Forensics in 2003. The underlying goals were that the program be multidisciplinary, bringing together the law, computer technology, and the basics of digital investigations; would be available as on online and on-campus offering; and would have a process-oriented focus. Success of this program has largely been due to working closely with practitioners, maintaining activity in events related to both industry and academia, and flexibility to respond to ever-changing needs. This paper provides an overview of how this program was conceived, developed, and implemented; its evolution over time; and current and planned initiatives.

Evaluation of the 1997 Joint National Conference, Women in Engineering Program Advocates Network (WEPAN) and National Association of Minority Engineering Program Administrators (NAMEPA)

Energy Technology Data Exchange (ETDEWEB)

Brainard, Suzanne G.

1997-07-01

The primary goal of the 1997 Joint National Conference was to unite NAMEPA and WEPAN in a unique collaborative effort to further the cause of increasing the participation of women and minorities in science and engineering. The specific objectives were to: (1) conduct technical and programmatic seminars for institutions desiring to initiate, replicate, or expand women and minorities in engineering program; (2) provide assistance in fundraising and grant writing; (3) profile women in engineering programs of excellence; (4) sponsor inspiring knowledgeable and motivational keynote speakers; and (5) offer a series of workshops focused on a multitude of topics.

Experiences in solving the challenges of on-site degree programs

International Nuclear Information System (INIS)

Christenson, J.M.; Eckart, L.E.

1987-01-01

The University of Cincinnati (UC) Nuclear Engineering Program Faculty has now had six years of experience in delivering on-site educational programs to nuclear power plant technical personnel. Programs of this type present a variety of challenges to the faculty, the management of the client utility and to the students who become involved in a particular program. This paper describes how each of these groups can identify and successfully solve these challenges. The solutions the authors describe are drawn from their own experiences which have been described in some detail elsewhere. Other solutions to those challenges are certainly possible. They make no claim for the particular ones they offer, beyond the fact that they have worked over a sustained period of time and that results they have produced have left all three parties mutually satisfied

Matching grant program for university nuclear engineering education

International Nuclear Information System (INIS)

Bajorek, Stephen M.

2002-01-01

The grant augmented funds from Westinghouse Electric Co. to enhance the Nuclear Engineering program at KSU. The program was designed to provide educational opportunities and to train engineers for careers in the nuclear industry. It provided funding and access to Westinghouse proprietary design codes for graduate and undergraduate studies on topics of current industrial importance. Students had the opportunity to use some of the most advanced nuclear design tools in the industry and to work on actual design problems. The WCOBRA/TRAC code was used to simulate loss of coolant accidents (LOCAs)

Electronic Engineering Technology Program Exit Examination as an ABET and Self-Assessment Tool

Science.gov (United States)

Thomas, Gary; Darayan, Shahryar

2018-01-01

Every engineering, computing, and engineering technology program accredited by the Accreditation Board for Engineering and Technology (ABET) has formulated many and varied self-assessment methods. Methods used to assess a program for ABET accreditation and continuous improvement are for keeping programs current with academic and industrial…

Automatic program generation: future of software engineering

Energy Technology Data Exchange (ETDEWEB)

Robinson, J.H.

1979-01-01

At this moment software development is still more of an art than an engineering discipline. Each piece of software is lovingly engineered, nurtured, and presented to the world as a tribute to the writer's skill. When will this change. When will the craftsmanship be removed and the programs be turned out like so many automobiles from an assembly line. Sooner or later it will happen: economic necessities will demand it. With the advent of cheap microcomputers and ever more powerful supercomputers doubling capacity, much more software must be produced. The choices are to double the number of programers, double the efficiency of each programer, or find a way to produce the needed software automatically. Producing software automatically is the only logical choice. How will automatic programing come about. Some of the preliminary actions which need to be done and are being done are to encourage programer plagiarism of existing software through public library mechanisms, produce well understood packages such as compiler automatically, develop languages capable of producing software as output, and learn enough about the whole process of programing to be able to automate it. Clearly, the emphasis must not be on efficiency or size, since ever larger and faster hardware is coming.

SoTL and Students' Experiences of Their Degree-Level Programs: An Empirical Investigation

Science.gov (United States)

Matthews, Kelly E.; Divan, Aysha; John-Thomas, Nicole; Lopes, Valerie; Ludwig, Lynn O.; Martini, Tanya S.; Motley, Phillip; Tomljenovic-Berube, Ana M.

2013-01-01

In the global higher education sector, government accountability initiatives are increasingly focused on degree-level competencies that may be expected from university graduates. The purpose of this paper was to examine the extent to which SoTL reflects this increased interest in student learning across the degree program. Articles (N = 136)…

Syllabus for an Associate Degree Program in Applied Marine Biology and Oceanography.

Science.gov (United States)

Banerjee, Tapan

Included is a detailed outline of the content of each course required or offered as an elective in the associate degree program. With an 18 or 19 unit load each semester the program requires two years, and includes 64 hours at sea every semester. In addition to chemistry, physics, biology, and oceanography courses, there is a required course in…

Teaching Continuum Mechanics in a Mechanical Engineering Program

Science.gov (United States)

Liu, Yucheng

2011-01-01

This paper introduces a graduate course, continuum mechanics, which is designed for and taught to graduate students in a Mechanical Engineering (ME) program. The significance of continuum mechanics in engineering education is demonstrated and the course structure is described. Methods used in teaching this course such as topics, class…

The master degree: A critical transition in STEM doctoral education

Science.gov (United States)

Lange, Sheila Edwards

The need to broaden participation in the nation's science, technology, engineering, and mathematics (STEM) undergraduate and graduate programs is currently a matter of national urgency. The small number of women and underrepresented minorities (URM) earning doctoral degrees in STEM is particularly troubling given significant increases in the number of students earning master's degrees since 1990. In the decade between 1990 and 2000, the total number of master's recipients increased by 42%. During this same time period, the number of women earning master's degrees increased by 56%, African Americans increased by 132%, American Indians by 101%, Hispanics by 146%, and Asian Americans by 117% (Syverson, 2003). Growth in underrepresented group education at the master's level raises questions about the relationship between master's and doctoral education. Secondary data analysis of the Survey of Earned Doctorates (SED) was used to examine institutional pathways to the doctorate in STEM disciplines and transitions from master's to doctoral programs by race and gender. While the study revealed no significant gender differences in pathways, compared to White and Asian American students, URM students take significantly different pathways to the doctorate. URM students are significantly more likely to earn the bachelor's, master's, and doctoral degrees at three different institutions. Their path is significantly more likely to include earning a master's degree en route to the doctorate. Further, URM students are more likely to experience transition between the master's and doctoral degrees, and the transitions are not limited to those who earn master's degrees at master's-only institutions. These findings suggest that earning a master's degree is more often a stepping stone to the doctorate for URM students. Master's degree programs, therefore, have the potential to be a valuable resource for policymakers and graduate programs seeking to increase the diversity of URM students

Biomedical Engineering: A Compendium of Research Training Programs.

Science.gov (United States)

National Inst. of General Medical Sciences (NIH), Bethesda, MD.

This document was prepared to provide a comprehensive view of the programs in biomedical engineering in existence in 1969. These programs are supported by the National Institute of General Medical Sciences and are located at 18 universities. This compendium provides information as to the intent and content of these programs from data provided by…

LED provides engineering and electrooptics support to the Laser Program

International Nuclear Information System (INIS)

Pehrson, D.

1985-01-01

The work of the Laser Engineering Division is reviewed. The division provides engineering and electrooptics support to the laser program. The laser program has been an integral part of the efforts to explore the potential of lasers in harnessing thermonuclear fusion for energy and for defense-related physics studies and in efficiently separating fissile fuels

Acoustics: A branch of engineering at the Universidad Austral de Chile (UACh)

Science.gov (United States)

Poblete, Victor; Arenas, Jorge P.; Sommerhoff, Jorge

2002-11-01

At the end of the 1960s, the first acousticians graduating at UACh had acquired an education in applied physics and musical arts, since there was no College of Engineering at that time. Initially, they had a (rather modest) four-year undergraduate program, and most of the faculty were not specialized teachers. The graduates from such a program received a sound engineering degree and they were skilled for jobs in the musical industry and sound reinforcement companies. In addition, they worked as sound engineers and producers. Later, because of the scientific, industrial and educational changes in Chile during the 1980s, the higher education system had massive changes that affected all of the undergraduate and graduate programs of the 61 universities in Chile. The UACh College of Engineering was officially founded in 1989. Then, acoustics as an area of expertise was included, widened and developed as an interdisciplinary subject. Currently, the undergraduate program in acoustics at UACh offers a degree in engineering sciences and a 6-year professional studies in Civil Engineering (Acoustics), having two main fields: Sound and Image, and Environment and Industry.

Current status of nuclear engineering education

International Nuclear Information System (INIS)

Palladino, N.J.

1975-01-01

The 65 colleges and universities offering undergraduate degrees in nuclear engineering and the 15 schools offering strong nuclear engineering options are, in general, doing a good job to meet the current spectrum of job opportunities. But, nuclear engineering programs are not producing enough graduates to meet growing demands. They currently receive little aid and support from their customers --industry and government--in the form of scholarships, grants, faculty research support, student thesis and project support, or student summer jobs. There is not enough interaction between industry and universities. Most nuclear engineering programs are geared too closely to the technology of the present family of reactors and too little to the future breeder reactors and controlled thermonuclear reactors. In addition, nuclear engineering programs attract too few women and members of minority ethnic groups. Further study of the reasons for this fact is needed so that effective corrective action can be taken. Faculty in nuclear engineering programs should assume greater initiative to provide attractive and objective nuclear energy electives for technical and nontechnical students in other disciplines to improve their technical understanding of the safety and environmental issues involved. More aggressive and persistent efforts must be made by nuclear engineering schools to obtain industry support and involvement in their programs

Waste feed delivery program systems engineering implementation plan

International Nuclear Information System (INIS)

O'Toole, S.M.; Hendel, B.J.

1998-01-01

This document defines the systems engineering processes and products planned by the Waste Feed Delivery Program to develop the necessary and sufficient systems to provide waste feed to the Privatization Contractor for Phase 1. It defines roles and responsibilities for the performance of the systems engineering processes and generation of products

First Wall, Blanket, Shield Engineering Technology Program

International Nuclear Information System (INIS)

Nygren, R.E.

1982-01-01

The First Wall/Blanket/Shield Engineering Technology Program sponsored by the Office of Fusion Energy of DOE has the overall objective of providing engineering data that will define performance parameters for nuclear systems in advanced fusion reactors. The program comprises testing and the development of computational tools in four areas: (1) thermomechanical and thermal-hydraulic performance of first-wall component facsimiles with emphasis on surface heat loads; (2) thermomechanical and thermal-hydraulic performance of blanket and shield component facsimiles with emphasis on bulk heating; (3) electromagnetic effects in first wall, blanket, and shield component facsimiles with emphasis on transient field penetration and eddy-current effects; (4) assembly, maintenance and repair with emphasis on remote-handling techniques. This paper will focus on elements 2 and 4 above and, in keeping with the conference participation from both fusion and fission programs, will emphasize potential interfaces between fusion technology and experience in the fission industry

A qualitative study of motivation in Alaska Native Science and Engineering Program (ANSEP) precollege students

Science.gov (United States)

Yatchmeneff, Michele

The dramatic underrepresentation of Alaska Natives in science, technology, engineering and mathematics (STEM) degrees and professions calls for rigorous research in how students access these fields. Research has shown that students who complete advanced mathematics and science courses while in high school are more academically prepared to pursue and succeed in STEM degree programs and professions. There is limited research on what motivates precollege students to become more academically prepared before they graduate from high school. In Alaska, Alaska Native precollege students regularly underperform on required State of Alaska mathematics and science exams when compared to non-Alaska Native students. Research also suggests that different things may motivate Alaska Native students than racial majority students. Therefore there is a need to better understand what motivates Alaska Native students to take and successfully complete advanced mathematics and science courses while in high school so that they are academically prepared to pursue and succeed in STEM degrees and professions. The Alaska Native Science & Engineering Program (ANSEP) is a longitudinal STEM educational enrichment program that works with Alaska Native students starting in middle school through doctoral degrees and further professional endeavors. Research suggests that Alaska Native students participating in ANSEP are completing STEM degrees at higher rates than before the program was available. ANSEP appears to be unique due to its longitudinal approach and the large numbers of Alaska Native precollege, university, and graduate students it supports. ANSEP provides precollege students with opportunities to take advanced high school and college-level mathematics and science courses and complete STEM related projects. Students work and live together on campus during the program components. Student outcome data suggests that ANSEP has been successful at motivating precollege participants to

Lightweight two-stroke cycle aircraft diesel engine technology enablement program, volume 2

Science.gov (United States)

Freen, P. D.; Berenyi, S. G.; Brouwers, A. P.; Moynihan, M. E.

1985-01-01

An experimental Single Cylinder Test Engine Program is conducted to confirm the analytically projected performance of a two-stroke cycle diesel engine for aircraft applications. Testing confirms the ability of a proposed 4-cylinder version of such an engine to reach the target power at altitude in a highly turbocharged configuration. The experimental program defines all necessary parameters to permit a design of a multicylinder engine for eventual flight applications.

International Cooperation Programs Of The Department Of Nuclear And Quantum Engineering (NQe) At KAIST For Nuclear Program Developing Countries In Asia

International Nuclear Information System (INIS)

Poong Huyn Seong; Ki SoonYum

2008-01-01

NQe of KAIST has developed and conducted a few international cooperation programs for Asian countries which are actively developing their nuclear programs. These include inviting several students from these countries annually for short term period such as one semester and have them experience nuclear education programs at KAIST by taking NQe courses, attending Korean Nuclear Society (KNS) meeting, and visiting some nuclear related organizations such as nuclear power plants and Doosan Heavy Industry Machine shops in Korea. These also include visiting lectures conducted by KAIST NQe professors at some universities in the nuclear program developing countries. Both of above two programs have been performed mainly for Vietnam so far but now are becoming expanded. The last program of these international cooperation activities at NQe for Nuclear Program Developing countries in Asia is the RCA/KAIST master degree program which is open to all 17 RCA countries. Thus far, we have had about 18 students from 9 different countries. NQe is looking for some more international cooperation programs which are beneficial both for Korea and for other countries right now. NQe is starting a joint summer school program between KAIST and Shanghai Jiatong University in this sense. Also, some kind of cooperation between NQe at KAIST and Department of Engineering Physics at Tsinghua University in China is also being sought now. (author)

Experience in nuclear engineering distance education at the University of Tennessee

International Nuclear Information System (INIS)

Dodds, H.L.

2011-01-01

This paper describes the distance education programs in nuclear engineering at The University of Tennessee (UT), which includes several courses that are of interest to the mathematics and computation community such as reactor theory and design, shielding, statistics, health physics, and criticality safety. All of the courses needed for the MS degree in nuclear engineering and several of the courses needed for the PhD degree in nuclear engineering are delivered synchronously (i.e., interactive in real time) via the Internet to students located anywhere by instructors located anywhere. The paper will also describe the historical development of distance education programs at UT as well as the benefits of the programs to students and to the university. The oral presentation associated with this paper will include a short movie that demonstrates the technology used for distance delivery. (author)

Biodiesel unsaturation degree effects on diesel engine NOx emissions and cotton wick flame temperature

OpenAIRE

Abdullah Mohd Fareez Edzuan; Zhing Sim Shu; Bilong Bugik Clarence

2017-01-01

As compared with conventional diesel fuel, biodiesel has better lubricity and lower particulate matter (PM) emissions however nitrogen oxides (NOx) emissions generally increase in biodiesel-fuelled diesel engine. Strict regulation on NOx emissions is being implemented in current Euro 6 standard and it is expected to be tighter in next standard, thus increase of NOx cannot be accepted. In this study, biodiesel unsaturation degree effects on NOx emissions are investigated. Canola, palm and coco...

Pollution technology program, can-annular combustor engines

Science.gov (United States)

Roberts, R.; Fiorentino, A. J.; Greene, W.

1976-01-01

A Pollution Reduction Technology Program to develop and demonstrate the combustor technology necessary to reduce exhaust emissions for aircraft engines using can-annular combustors is described. The program consisted of design, fabrication, experimental rig testing and assessment of results and was conducted in three program elements. The combustor configurations of each program element represented increasing potential for meeting the 1979 Environmental Protection Agency (EPA) emission standards, while also representing increasing complexity and difficulty of development and adaptation to an operational engine. Experimental test rig results indicate that significant reductions were made to the emission levels of the baseline JT8D-17 combustor by concepts in all three program elements. One of the Element I single-stage combustors reduced carbon monoxide to a level near, and total unburned hydrocarbons (THC) and smoke to levels below the 1979 EPA standards with little or no improvement in oxides of nitrogen. The Element II two-stage advanced Vorbix (vortex burning and mixing) concept met the standard for THC and achieved significant reductions in CO and NOx relative to the baseline. Although the Element III prevaporized-premixed concept reduced high power NOx below the Element II results, there was no improvement to the integrated EPA parameter relative to the Vorbix combustor.

An Exploration of Factors Affecting Persistence to Degree Completion in an Undergraduate Music Education Program

Science.gov (United States)

Gavin, Russell B.

2016-01-01

The purpose of this study was to explore the experiences of students (N = 26) in an undergraduate music education degree program in an attempt to identify commonalities among students persisting to degree completion. All participants were in their final year of the music education degree at the time of the study. Multiple data collection methods…

Administrators' Perceptions of Motives to Offer Online Academic Degree Programs in Universities

Science.gov (United States)

Özcan, Hakan; Yildirim, Soner

2018-01-01

Although the number of online academic degree programs offered by universities in Turkey has become increasingly significant in recent years, the current lack of understanding of administrators' motives that contribute to initiating these programs suggests there is much to be learned in this field. This study aimed to investigate administrators'…

Institutional Goal Priorities in Texas: A Look at an Associate Degree Nursing Program.

Science.gov (United States)

De Leon, John E.

A study examined the perceptions of four key constituent groups from the Southeast College Associate Degree Nursing (ADN) program regarding institutional goal priorities. (Southeast College manages the ADN program for the Houston Community College System.) The study involved 23 ADN faculty, 13 college administrators, 128 ADN students, and 5 ADN…

Hydrogen hybrid vehicle engine development: Experimental program

Energy Technology Data Exchange (ETDEWEB)

Van Blarigan, P. [Sandia National Lab., Livermore, CA (United States)

1995-09-01

A hydrogen fueled engine is being developed specifically for the auxiliary power unit (APU) in a series type hybrid vehicle. Hydrogen is different from other internal combustion (IC) engine fuels, and hybrid vehicle IC engine requirements are different from those of other IC vehicle engines. Together these differences will allow a new engine design based on first principles that will maximize thermal efficiency while minimizing principal emissions. The experimental program is proceeding in four steps: (1) Demonstration of the emissions and the indicated thermal efficiency capability of a standard CLR research engine modified for higher compression ratios and hydrogen fueled operation. (2) Design and test a new combustion chamber geometry for an existing single cylinder research engine, in an attempt to improve on the baseline indicated thermal efficiency of the CLR engine. (3) Design and build, in conjunction with an industrial collaborator, a new full scale research engine designed to maximize brake thermal efficiency. Include a full complement of combustion diagnostics. (4) Incorporate all of the knowledge thus obtained in the design and fabrication, by an industrial collaborator, of the hydrogen fueled engine for the hybrid vehicle power train illustrator. Results of the CLR baseline engine testing are presented, as well as preliminary data from the new combustion chamber engine. The CLR data confirm the low NOx produced by lean operation. The preliminary indicated thermal efficiency data from the new combustion chamber design engine show an improvement relative to the CLR engine. Comparison with previous high compression engine results shows reasonable agreement.

Problem-Based Learning in Engineering Ethics Courses

Science.gov (United States)

Kirkman, Robert

2016-01-01

I describe the first stages of a process of design research in which I employ problem-based learning in a course in engineering ethics, which fulfills a requirement for students in engineering degree programs. The aim of the course is to foster development of particular cognitive skills contributing to moral imagination, a capacity to notice,…

The 2015-2016 SEPMAP Program at NASA JSC: Science, Engineering, and Program Management Training

Science.gov (United States)

Graham, L.; Archer, D.; Bakalyar, J.; Berger, E.; Blome, E.; Brown, R.; Cox, S.; Curiel, P.; Eid, R.; Eppler, D.;

Repository-based software engineering program

Science.gov (United States)

Wilson, James

1992-01-01

The activities performed during September 1992 in support of Tasks 01 and 02 of the Repository-Based Software Engineering Program are outlined. The recommendations and implementation strategy defined at the September 9-10 meeting of the Reuse Acquisition Action Team (RAAT) are attached along with the viewgraphs and reference information presented at the Institute for Defense Analyses brief on legal and patent issues related to software reuse.

Engineering, Analysis and Technology FY 1995 Site Support Program Plan

International Nuclear Information System (INIS)

Suyama, R.M.

1994-09-01

The vision of the Engineering, Analysis and Technology organization is to be recognized as the cost-effective supplier of specialized, integrated, multi-disciplined engineering teams to support Hanford missions. The mission of the Engineering, Analysis and Technology organization is to provide centralized engineering services. These services are focused on supplying technical design, analytical engineering and related support services that support Hanford's environmental restoration mission. These services include engineering analysis, design and development of systems and engineered equipment, supplying multi-disciplined engineering teams to all Hanford programs and project organizations, engineering document release, and site-wide leadership in the development and implementation of engineering standards, engineering practices, and configuration management processes

Identifying the Gaps of Fourth Year Degree Pre-Service Teachers' Pedagogical Content Knowledge in Teaching Engineering Graphics and Design

Science.gov (United States)

Khoza, Samuel Dumazi

2017-01-01

Engineering Graphics and Design is a technological subject which is offered in the Bachelor of Education degree from third to fourth year of the degree course. Fourth year pre-service teachers find EGD difficult to teach because of various reasons. Therefore the aim of the paper was to investigate fourth year pre-service teachers' pedagogical…

Organizational Learning to Implementation: Development of Post-Secondary Online Degree Programs

Science.gov (United States)

Davis, Kirk Alan

2011-01-01

The purpose of this study was to analyze organizational learning and the facilitating factors and critical elements for development of post-secondary distance education and online degree programs at three universities in Hawaii: University of Hawaii at Hilo (public), Hawaii Pacific University and Chaminade University (both private). The researcher…

Diving Deep: A Comparative Study of Educator Undergraduate and Graduate Backgrounds and Their Effect on Student Understanding of Engineering and Engineering Careers, Utilizing an Underwater Robotics Program

Science.gov (United States)

Scribner, J. Adam

Numerous studies have demonstrated that educators having degrees in their subjects significantly enhances student achievement, particularly in secondary mathematics and science (Chaney, 1995; Goe, 2007; Rowan, Chiang, & Miller, 1997; Wenglinsky, 2000). Yet, science teachers in states that adopt the Next Generation Science Standards will be facilitating classroom engineering activities despite the fact that few have backgrounds in engineering. This quantitative study analyzed ex-post facto WaterBotics (an innovative underwater robotics curriculum for middle and high school students) data to determine if educators having backgrounds in engineering (i.e., undergraduate and graduate degrees in engineering) positively affected student learning on two engineering outcomes: 1) the engineering design process, and 2) understanding of careers in engineering (who engineers are and what engineers do). The results indicated that educators having backgrounds in engineering did not significantly affect student understanding of the engineering design process or careers in engineering when compared to educators having backgrounds in science, mathematics, technology education, or other disciplines. There were, however, statistically significant differences between the groups of educators. Students of educators with backgrounds in technology education had the highest mean score on assessments pertaining to the engineering design process while students of educators with disciplines outside of STEM had the highest mean scores on instruments that assess for student understanding of careers in engineering. This might be due to the fact that educators who lack degrees in engineering but who teach engineering do a better job of "sticking to the script" of engineering curricula.

An overview of the NASA rotary engine research program

Science.gov (United States)

Meng, P. R.; Hady, W. F.

1984-01-01

A brief overview and technical highlights of the research efforts and studies on rotary engines over the last several years at the NASA Lewis Research Center are presented. The test results obtained from turbocharged rotary engines and preliminary results from a high performance single rotor engine were discussed. Combustion modeling studies of the rotary engine and the use of a Laser Doppler Velocimeter to confirm the studies were examined. An in-house program in which a turbocharged rotary engine was installed in a Cessna Skymaster for ground test studies was reviewed. Details are presented on single rotor stratified charge rotary engine research efforts, both in-house and on contract.

Integration of safety engineering into a cost optimized development program.

Science.gov (United States)

Ball, L. W.

1972-01-01

A six-segment management model is presented, each segment of which represents a major area in a new product development program. The first segment of the model covers integration of specialist engineers into 'systems requirement definition' or the system engineering documentation process. The second covers preparation of five basic types of 'development program plans.' The third segment covers integration of system requirements, scheduling, and funding of specialist engineering activities into 'work breakdown structures,' 'cost accounts,' and 'work packages.' The fourth covers 'requirement communication' by line organizations. The fifth covers 'performance measurement' based on work package data. The sixth covers 'baseline requirements achievement tracking.'

Results of the pollution reduction technology program for turboprop engines

Science.gov (United States)

Mularz, E. J.

1976-01-01

A program was performed to evolve and demonstrate advanced combustor technology aimed at achieving the 1979 EPA standards for turboprop engines (Class P2). The engine selected for this program was the 501-D22A turboprop manufactured by Detroit Diesel Allison Division of General Motors Corporation. Three combustor concepts were designed and tested in a combustor rig at the exact combustor operating conditions of the 501-D22A engine over the EPA landing-takeoff cycle. Each combustor concept exhibited pollutant emissions well below the EPA standards, achieving substantial reductions in unburned hydrocarbons, carbon monoxide, and smoke emissions compared with emissions from the production combustor of this engine. Oxides of nitrogen emissions remained well below the EPA standards, also.

Education of biomedical engineering in Taiwan.

Science.gov (United States)

Lin, Kang-Ping; Kao, Tsair; Wang, Jia-Jung; Chen, Mei-Jung; Su, Fong-Chin

2014-01-01

Biomedical Engineers (BME) play an important role in medical and healthcare society. Well educational programs are important to support the healthcare systems including hospitals, long term care organizations, manufacture industries of medical devices/instrumentations/systems, and sales/services companies of medical devices/instrumentations/system. In past 30 more years, biomedical engineering society has accumulated thousands people hold a biomedical engineering degree, and work as a biomedical engineer in Taiwan. Most of BME students can be trained in biomedical engineering departments with at least one of specialties in bioelectronics, bio-information, biomaterials or biomechanics. Students are required to have internship trainings in related institutions out of campus for 320 hours before graduating. Almost all the biomedical engineering departments are certified by IEET (Institute of Engineering Education Taiwan), and met the IEET requirement in which required mathematics and fundamental engineering courses. For BMEs after graduation, Taiwanese Society of Biomedical Engineering (TSBME) provides many continue-learning programs and certificates for all members who expect to hold the certification as a professional credit in his working place. In current status, many engineering departments in university are continuously asked to provide joint programs with BME department to train much better quality students. BME is one of growing fields in Taiwan.

45 CFR 2400.41 - Degree programs.

Science.gov (United States)

2010-10-01

... degree in history or political science (including government or politics), the degree of Master of Arts in Teaching in history or political science (including government or politics), or a related master's degree in education that permits a concentration in American history, American government, social studies...

Engineering success: Persistence factors of African American doctoral recipients in engineering and applied science

Science.gov (United States)

Simon, Tiffany Monique

The purpose of this qualitative study was to identify factors that influence African Americans to pursue and complete doctoral degrees in engineering and applied science disciplines. Critical race theory (CRT), two models of doctoral student persistence, and graduate student persistence literature guided the conceptual framework of this study. In-depth and focus group interviews were conducted to learn the key factors that positively impacted the persistence of 19 African Americans who earned doctoral degrees in engineering and applied science. The following two factors were found to significantly contribute to the decision to pursue the doctorate: encouragement from others and participation in a research or internship program. Key factors impacting doctoral degree completion included: peer support, faculty adviser support, support from university administrators, and family support. In addition to identifying factors that influenced 19 African Americans to pursue and complete doctoral degrees in engineering and applied science, this study was about the importance of diversity and inclusion of multiple perspectives in education research and scholarship. To this end, the study served to promote and include the expert knowledge of African American doctoral degree recipients in engineering and applied science in the scholarly discourse on the issue of low participation rates of African Americans in engineering and applied science disciplines. Such knowledge will challenge traditional views on this issue and hopefully inspire new ways of addressing and remedying this issue. With African Americans and other minority populations growing at an exponential rate, people of color are quickly becoming the majority in key states across the nation. Therefore, it is imperative that all Americans have an opportunity to develop skills necessary to compete for professional positions in the science and engineering workforce. This mandate is required for the United States to maintain

A Phenomenological Study of the Lived Experiences of Digital Immigrants in a Fully Online Master's Degree Program

Science.gov (United States)

Kieschnick, Stuart

2012-01-01

This qualitative study was designed to investigate the challenges encountered and support systems needed by digital immigrants enrolled in an online master's degree program. Participants were digital immigrants who were born before 1980 and enrolled or recently graduated from an online master's degree program. Survey data and demographic data were…

Automotive Stirling engine Market and Industrial Readiness Program (MIRP), phase 1

Science.gov (United States)

1982-05-01

A program, begun in 1978, has the goal of transferring Stirling engine technology from United Stirling of Sweden to the US and, then, following design, fabrication, and prototype testing, to secure US manufacturers for the engine. The ultimate objective is the large-scale commercial use of the Automotive Stirling Engine (ASE) by the year 2000. The fist phase of the Market and Industrial Readiness Program for the ASE was concerned with defining the market, product, economic and technical factors necessary to be addressed to assure a reasonable chance of ultimate commercial acceptance. Program results for this first phase are reported and discussed. These results pertain to licensing strategy development, economic analysis, market factors, product planning, market growth, cost studies, and engine performance as measured by fuel economy using conventional fuels and by vehicle speed and acceleration characteristics.

Introducing Software Engineering by means of Extreme Programming

DEFF Research Database (Denmark)

Hedin, G.; Bendix, Lars Gotfred; Magnusson, B.

2003-01-01

This paper reports on experience from teaching basic software engineering concepts by using Extreme Programming in a second year undergraduate course taken by 107 students. We describe how this course fits into a wider programme on software engineering and technology and report our experience from...... running and improving the course. Particularly important aspects of our set-up includes team coaching (by older students) and "team-in-one-room". Our experience so far is very positive and we see that students get a good basic understanding of the important concepts in software engineering, rooted...

An Engineering Research Program for High School Science Teachers: Year Two Changes and Results

Science.gov (United States)

DeJong, Brian P.; Yelamarthi, Kumar; Kaya, Tolga

2016-01-01

The research experiences for teachers program at Central Michigan University was initiated to team in-service and pre-service teachers with undergraduate engineering students and engineering faculty, in an engineering research setting. During the six-week program, teachers learn engineering concepts and develop high-school instructional material…

Solid waste operations complex engineering verification program plan

International Nuclear Information System (INIS)

Bergeson, C.L.

1994-01-01

This plan supersedes, but does not replace, the previous Waste Receiving and Processing/Solid Waste Engineering Development Program Plan. In doing this, it does not repeat the basic definitions of the various types or classes of development activities nor provide the rigorous written description of each facility and assign the equipment to development classes. The methodology described in the previous document is still valid and was used to determine the types of verification efforts required. This Engineering Verification Program Plan will be updated on a yearly basis. This EVPP provides programmatic definition of all engineering verification activities for the following SWOC projects: (1) Project W-026 - Waste Receiving and Processing Facility Module 1; (2) Project W-100 - Waste Receiving and Processing Facility Module 2A; (3) Project W-112 - Phase V Storage Facility; and (4) Project W-113 - Solid Waste Retrieval. No engineering verification activities are defined for Project W-112 as no verification work was identified. The Acceptance Test Procedures/Operational Test Procedures will be part of each project's Title III operation test efforts. The ATPs/OTPs are not covered by this EVPP

Quality Assurance of Joint Degree Programs from the Perspective of Quality Assurance Agencies: Experience in East Asia

Science.gov (United States)

Hou, Yung-Chi; Ince, Martin; Tsai, Sandy; Wang, Wayne; Hung, Vicky; Lin Jiang, Chung; Chen, Karen Hui-Jung

2016-01-01

Joint degree programs have gained popularity in East Asia, due to the growth of transnational higher education in the region since 2000. However, the external quality assurance (QA) and accreditation of joint degree programs is a challenge for QA agencies, as it normally involves the engagement of several institutions and multiple national…

Attitudes and Perceptions of Dual PharmD/MBA Degree Program Students.

Science.gov (United States)

Jacobs, David M; Daly, Christopher J; Tierney, Sarah-Elizabeth L; O'Brien, Erin; Fiebelkorn, Karl D

2017-05-01

Objectives. To understand pharmacy students' reasons for pursuing a dual PharmD/MBA degree and their perceptions of the impact a dual degree will have on their careers. Methods. This was a cross-sectional survey of registered students in the University at Buffalo PharmD/MBA program. An electronic survey was developed through collaboration with the UB School of Management and administered in January 2015. Results. A total of 23/24 (96% response rate) students who were enrolled in the PharmD/MBA curriculum responded to the survey. Respondents identified employment opportunities following graduation and career advancement as the most influential determinants in deciding to pursue an MBA degree. All respondents (100%) felt the job marketplace for pharmacy graduates is becoming increasingly difficult, 96% believe they will earn a higher midpoint salary with a PharmD/MBA, and 82% would recommend a PharmD/MBA to first year pharmacy students. Conclusion. Students are increasingly perceptive of the challenges in the current job marketplace and are taking advantage of a dual PharmD/MBA degree.

Increasing Retention of Women in Engineering at WSU: A Model for a Women's Mentoring Program

Science.gov (United States)

Poor, Cara J.; Brown, Shane

2013-01-01

Concerns with the retention of women in engineering have led to the implementation of numerous programs to improve retention, including mentoring programs. The college of engineering at Washington State University (WSU) started a novel women's mentoring program in 2008, using professional engineers who graduated from WSU as mentors. The program is…

Evaluability Assessment Thesis and Dissertation Studies in Graduate Professional Degree Programs

Science.gov (United States)

Walser, Tamara M.; Trevisan, Michael S.

2016-01-01

Evaluability assessment (EA) has potential as a design option for thesis and dissertation studies, serving as a practical training experience for both technical and nontechnical evaluation skills. Based on a content review of a sample of EA theses and dissertations from graduate professional degree programs, the authors of this article found that…

Using the Wiimote to Learn MEMS in a Physics Degree Program

Science.gov (United States)

Sánchez-Azqueta, Carlos; Gimeno, Cecilia; Celma, Santiago; Aldea, Concepción

2016-01-01

This paper describes a learning experience designed to introduce students in a Micro- and Nanosystems course in a Physics Bachelor's degree program to the use of professional tools for the design and characterization of micro-electromechanical systems (MEMS) through a specific commercial case: the MEMS used by the well-known gaming platform…

Current Trends in Adult Degree Programs: How Public Universities Respond to the Needs of Adult Learners

Science.gov (United States)

Gast, Angela

2013-01-01

Although many adult students turn to online degree programs due to their flexibility and convenience, a majority of prospective adult learners prefer to take classes on traditional brick-and-mortar campuses. This chapter examines how public research universities create pathways to degree attainment and boost degree completion rates among adult…

Food, Environment, Engineering and Life Sciences Program (Invited)

Science.gov (United States)

Mohtar, R. H.; Whittaker, A.; Amar, N.; Burgess, W.

2009-12-01

Food, Environment, Engineering and Life Sciences Program Nadia Amar, Wiella Burgess, Rabi H. Mohtar, and Dale Whitaker Purdue University Correspondence: mohtar@purdue.edu FEELS, the Food, Environment, Engineering and Life Sciences Program is a grant of the National Science Foundation for the College of Agriculture at Purdue University. FEELS’ mission is to recruit, retain, and prepare high-achieving students with financial difficulties to pursue STEM (Science, Technology, Engineering, and Mathematics) careers. FEELS achieves its goals offering a scholarship of up to 10,000 per student each year, academic, research and industrial mentors, seminars, study tables, social and cultural activities, study abroad and community service projects. In year one, nine low-income, first generation and/or ethnic minority students joined the FEELS program. All 9 FEELS fellows were retained in Purdue’s College of Agriculture (100%) with 7 of 9 (77.7%) continuing to pursue STEM majors. FEELS fellows achieved an average GPA in their first year of 3.05, compared to the average GPA of 2.54 for low-income non- FEELS students in the College of Agriculture. A new cohort of 10 students joined the program in August 2009. FEELS fellows received total scholarships of nearly 50,000 for the 2008-2009 academic year. These scholarships were combined with a holistic program that included the following key elements: FEELS Freshman Seminars I and II, 2 study tables per week, integration activities and frequent meetings with FEELS academic mentors and directors. Formative assessments of all FEELS activities were used to enhance the first year curriculum for the second cohort. Cohort 1 will continue into their second year where the focus will be on undergraduate research. More on FEELS programs and activities: www.purdue.edu/feels.

The Import-Substitution Adaptation of Power Engineering Programs

Directory of Open Access Journals (Sweden)

Aleksandr N. Kuzminov

2017-03-01

Full Text Available The realization problem of the import substitution policy in the context of existing programs for the individual branches development is considered in the paper on the example of power engineering. There is a contradiction to the objective of programs reflected in the process of alignment, which consists in stabilizing on the one hand and on the development of innovative on the other hand. In addition, the analysis of the implementation of power engineering of the Russian Federation for 2010-2020 and up to 2030 revealed significant shortcomings and deficiencies that reinforce the negative trends of this pairing. Classification of problems and purpose allowed choosing the most significant conceptual directions, methodologically based on the ideas of self-organization and balance, which can get instrumentality software by adapting programs for the development of power engineering in the system of the European model of Industry 4.0. As a fundamental position addresses the need for such a project, which would ensure the greatest impact with limited resources, including public funding, which lags far behind foreign. It is proposed to transform the efforts to implement the existing strategies of industry development in view of the policy of import substitution based on the implementation of the program of production of a balanced range of innovative products and providing replacement of imported equipment and the formation of the technological basis for the development of the industry

Lightweight two-stroke cycle aircraft diesel engine technology enablement program, volume 1

Science.gov (United States)

Freen, P. D.; Berenyi, S. G.; Brouwers, A. P.; Moynihan, M. E.

1985-01-01

An experimental Single Cylinder Test Engine Program is conducted to confirm the analytically projected performance of a two-stroke cycle diesel engine for aircraft applications. The test engine delivered 78kW indicated power from 1007cc displacement, operating at 3500 RPM on Schnuerle loop scavenged two-stroke cycle. Testing confirms the ability of a proposed 4-cylinder version of such an engine to reach the target power at altitude, in a highly turbocharged configuration. The experimental program defines all necessary parameters to permit design of a multicylinder engine for eventual flight applications; including injection system requirement, turbocharging, heat rejection, breathing, scavenging, and structural requirements. The multicylinder engine concept is configured to operate with an augmented turbocharger, but with no primary scavenge blower. The test program is oriented to provide a balanced turbocharger compressor to turbine power balance without an auxiliary scavenging system. Engine cylinder heat rejection to the ambient air has been significantly reduced and the minimum overall turbocharger efficiency required is within the range of commercially available turbochargers. Analytical studies and finite element modeling is made of insulated configurations of the engines - including both ceramic and metallic versions. A second generation test engine is designed based on current test results.

Modular Engine Noise Component Prediction System (MCP) Program Users' Guide

Science.gov (United States)

Golub, Robert A. (Technical Monitor); Herkes, William H.; Reed, David H.

2004-01-01

This is a user's manual for Modular Engine Noise Component Prediction System (MCP). This computer code allows the user to predict turbofan engine noise estimates. The program is based on an empirical procedure that has evolved over many years at The Boeing Company. The data used to develop the procedure include both full-scale engine data and small-scale model data, and include testing done by Boeing, by the engine manufacturers, and by NASA. In order to generate a noise estimate, the user specifies the appropriate engine properties (including both geometry and performance parameters), the microphone locations, the atmospheric conditions, and certain data processing options. The version of the program described here allows the user to predict three components: inlet-radiated fan noise, aft-radiated fan noise, and jet noise. MCP predicts one-third octave band noise levels over the frequency range of 50 to 10,000 Hertz. It also calculates overall sound pressure levels and certain subjective noise metrics (e.g., perceived noise levels).

Students' Perceptions of Long-Functioning Cooperative Teams in Accelerated Adult Degree Programs

Science.gov (United States)

Favor, Judy

2012-01-01

This study examined 718 adult students' perceptions of long-functioning cooperative study teams in accelerated associate's, bachelor's, and master's business degree programs. Six factors were examined: attraction toward team, alignment of performance expectations, intrateam conflict, workload sharing, preference for teamwork, and impact on…

Mapping Dual-Degree Programs in Social Work and Public Health: Results From a National Survey

Directory of Open Access Journals (Sweden)

Dory Ziperstein

2016-02-01

Full Text Available Dramatic changes in the health system due to national health reform are raising important questions regarding the educational preparation of social workers for the new health arena. While dual-degree programs in public health and social work can be an important response to what is needed educationally, little is known about them. The National MSW/MPH Programs Study surveyed MSW/MPH program administrators to better understand the prevalence, models, structure, and challenges of these dual-degree programs. Forty-two programs were identified, and 97.6% of those contacted participated (n=41. Findings indicate that MSW/MPH programs are popular, increasing, geographically dispersed, and drawing talented students interested in trans-disciplinary public health social work practice. Challenges for these programs include the need for greater institutional support, particularly funding, and a general lack of best practices for MSW/MPH education. While findings from this study suggest graduates appear especially well-prepared for leadership and practice in the new health environment, additional research is needed to assess their particular contributions and career trajectories.

Math and science education programs from the Idaho National Engineering Laboratory

International Nuclear Information System (INIS)

1991-01-01

This booklet reviews math and science education programs at the Idaho National Engineering Laboratory (INEL). The programs can be categorized into six groups: teacher programs; science laboratories for students; student programs; education outreach programs; INEL Public Affairs Office; and programs for college faculty and students

Academy of Program/Project & Engineering Leadership Annual Publications

Data.gov (United States)

National Aeronautics and Space Administration — Academy of Program/Project & Engineering Leadership's Annual Report highlights the Academy's efforts to serve the NASA workforce's needs in adapting to the...

A Program in Social Sciences for Engineering Students.

Science.gov (United States)

Kumar, K. S. P.

A set of programs in liberal education designed to enhance the social dimensions of engineering education is described. This program requires a minimum of 36 quarter credits in the broad categories of English Composition (8-10 credits), Man and Society (12-15 credits), Artistic Expression (8-10 credits), and the balance from any of the above…

Managing PBL difficulties in an industrial engineering and management program

Directory of Open Access Journals (Sweden)

Anabela Alves

2016-08-01

Full Text Available Purpose: Project-Based Learning (PBL is considered to be an active learning methodology which can be used to develop both technical and transversal competences in engineering programs. This methodology demands a great deal of work effort from the students and also from the teachers and it requires a meticulous plan and a well-managed project as well. These activities go far beyond the normal activities in traditional lectures, enabling to outpace the difficulties that spur along the way that may be both complex and demotivating. This methodology has been implemented in the Integrated Master Degree on Industrial Engineering and Management (IEM, at one public university in Portugal, since the 2004/2005 academic year. The aim of this paper is to identify and discuss the main difficulties of the implementation of PBL, mainly from the teachers’ perspectives. Additionally, some effective strategies will be recommended to overcome such difficulties. Design/methodology/approach: The perceptions of the teachers were collected through a survey based on six main themes. The participants in the study include eight teachers from the five courses of the first semester of the first year of the IEM program involved in the 2012/2013 and 2013/2014 editions. Findings: Integration of courses in the project; student assessment; growing number of students in each team and the need of physical spaces for them; and compartmentalized knowledge has emerged as the main difficulties. To overcome these difficulties some key strategies were recommended. Originality/value: A new perspective based on course teachers' views and experiences will deepen the understanding of the problems and provide inputs for the development of strategies that may improve the effectiveness of PBL and introduce changes for its successful implementation. These strategies are intended to be transferable to other contexts, as most of the problems and constraints are common to other active learning

Managing PBL difficulties in an industrial engineering and management program

International Nuclear Information System (INIS)

Alves, A.; Sousa, R.; Moreira, F.; Carvalho, M.A.; Cardoso, E.; Pimenta, P.; Malheiro, T.; Brito, I.; Fernandes, S.; Mesquita, D.

2016-01-01

Project-Based Learning (PBL) is considered to be an active learning methodology which can be used to develop both technical and transversal competences in engineering programs. This methodology demands a great deal of work effort from the students and also from the teachers and it requires a meticulous plan and a well-managed project as well. These activities go far beyond the normal activities in traditional lectures, enabling to outpace the difficulties that spur along the way that may be both complex and demotivating. This methodology has been implemented in the Integrated Master Degree on Industrial Engineering and Management (IEM), at one public university in Portugal, since the 2004/2005 academic year. The aim of this paper is to identify and discuss the main difficulties of the implementation of PBL, mainly from the teachers’ perspectives. Additionally, some effective strategies will be recommended to overcome such difficulties. Design/methodology/approach: The perceptions of the teachers were collected through a survey based on six main themes. The participants in the study include eight teachers from the five courses of the first semester of the first year of the IEM program involved in the 2012/2013 and 2013/2014 editions. Findings: Integration of courses in the project; student assessment; growing number of students in each team and the need of physical spaces for them; and compartmentalized knowledge has emerged as the main difficulties. To overcome these difficulties some key strategies were recommended. Originality/value: A new perspective based on course teachers' views and experiences will deepen the understanding of the problems and provide inputs for the development of strategies that may improve the effectiveness of PBL and introduce changes for its successful implementation. These strategies are intended to be transferable to other contexts, as most of the problems and constraints are common to other active learning approaches. (Author)

Managing PBL difficulties in an industrial engineering and management program

Energy Technology Data Exchange (ETDEWEB)

Alves, A.; Sousa, R.; Moreira, F.; Carvalho, M.A.; Cardoso, E.; Pimenta, P.; Malheiro, T.; Brito, I.; Fernandes, S.; Mesquita, D.

2016-07-01

Project-Based Learning (PBL) is considered to be an active learning methodology which can be used to develop both technical and transversal competences in engineering programs. This methodology demands a great deal of work effort from the students and also from the teachers and it requires a meticulous plan and a well-managed project as well. These activities go far beyond the normal activities in traditional lectures, enabling to outpace the difficulties that spur along the way that may be both complex and demotivating. This methodology has been implemented in the Integrated Master Degree on Industrial Engineering and Management (IEM), at one public university in Portugal, since the 2004/2005 academic year. The aim of this paper is to identify and discuss the main difficulties of the implementation of PBL, mainly from the teachers’ perspectives. Additionally, some effective strategies will be recommended to overcome such difficulties. Design/methodology/approach: The perceptions of the teachers were collected through a survey based on six main themes. The participants in the study include eight teachers from the five courses of the first semester of the first year of the IEM program involved in the 2012/2013 and 2013/2014 editions. Findings: Integration of courses in the project; student assessment; growing number of students in each team and the need of physical spaces for them; and compartmentalized knowledge has emerged as the main difficulties. To overcome these difficulties some key strategies were recommended. Originality/value: A new perspective based on course teachers' views and experiences will deepen the understanding of the problems and provide inputs for the development of strategies that may improve the effectiveness of PBL and introduce changes for its successful implementation. These strategies are intended to be transferable to other contexts, as most of the problems and constraints are common to other active learning approaches. (Author)

Building a more diverse biomedical engineering workforce: Biomedical engineering at the university of the district of Columbia, a historically black college & university.

Science.gov (United States)

Thompson, Lara A; Adebayo, A Segun; Nian Zhang; Haghani, Sasan; Dowell, Kathleen; Shetty, Devdas

2016-08-01

Biomedical Engineering (BME) is a new, multidisciplinary, and rapidly growing field, however, the BME Workforce suffers from limited ethnic and gender diversity. Despite the demand and growth of this new field due to its public health importance, only 4 out of the 107 Historically Black Colleges and Universities (HBCUs) nationwide offers a Bachelor's of Science (B.S.) in Bio-Engineering related fields. In order to contribute to a growing BME Workforce, HBCUs need to react and offer more degree-programs relevant to BME. At the University of the District of Columbia (UDC), an HBCU and the District's only public institution for higher learning, we have recently established a new, degree program: Bachelor of Science in Biomedical Engineering (B.S. in BME) full-board approved in Fall 2014, with program activities initiated in Fall 2015. The educational goal of this program is to enhance the quality and diversity of the BME Workforce via student professional development, new and relevant BME courses, and BME scholarly activities (e.g., guest lectures and journal club sessions), ultimately to increase the number of ethnic minorities pursuing careers and degrees in BME. Through our program activities, we are aiming to meet the nation's demand to contribute to a diverse BME workforce, directed towards solving problems in human health. A secondary, but related goal, is to increase the diversity of STEM-related fields. This paper summarizes our initial, but encouraging, BME activity-related findings. However, this study will be longitudinal (on a multiple year time period) to observe the true outcomes of our initiative.

1997 NASA-ODU American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program

Science.gov (United States)

Tiwari, Surendra N. (Compiler); Young, Deborah B. (Compiler)

1998-01-01

Since 1964, the National Aeronautics and Space Administration (NASA) has supported a program of summer faculty fellowships for engineering and science educators. In a series of collaborations between NASA research and development centers and nearby universities, engineering faculty members spend 10 weeks working with professional peers on research. The Summer Faculty Program Committee of the American Society for Engineering Education supervises the programs. Objectives of the program are as follows: (1) To further the professional knowledge of qualified engineering and science faculty members, (2) To stimulate and exchange ideas between participants and NASA; (3) To enrich and refresh the research and teaching activities of participants' institutions; and (4) To contribute to the research objectives of the NASA center. Program description is as follows: College or university faculty members will be appointed as Research Fellows to spend 10 weeks in cooperative research and study at the NASA Langley Research Center. The Fellow will devote approximately 90 percent of the time to a research problem and the remaining time to a study program. The study program will consist of lectures and seminars on topics of interest or that are directly relevant to the Fellows' research topics. The lectures and seminar leaders will be distinguished scientists and engineers from NASA, education, and industry.

A review of forensic science higher education programs in the United States: bachelor's and master's degrees.

Science.gov (United States)

Tregar, Kristen L; Proni, Gloria

2010-11-01

As the number of forensic science programs offered at higher education institutions rises, and more students express an interest in them, it is important to gain information regarding the offerings in terms of courses, equipment available to students, degree requirements, and other important aspects of the programs. A survey was conducted examining the existing bachelor's and master's forensic science programs in the U.S. Of the responding institutions, relatively few were, at the time of the survey, accredited by the forensic science Education Programs Accreditation Commission (FEPAC). In general, the standards of the responding programs vary considerably primarily in terms of their size and subjects coverage. While it is clear that the standards for the forensic science programs investigated are not homogeneous, the majority of the programs provide a strong science curriculum, faculties with advanced degrees, and interesting forensic-oriented courses. © 2010 American Academy of Forensic Sciences.

Availability and Perceived Value of Masters of Business Administration Degree Programs in Pharmaceutical Marketing and Management

Science.gov (United States)

Clauson, Kevin A.; Latif, David A.

2012-01-01

Objectives. To examine pharmacist-targeted master of business administration (MBA) degree programs and investigate pharmacists’ perceptions regarding them. Methods. Specialized MBA programs in pharmaceutical marketing and management offered at US colleges and schools of pharmacy were identified in the literature and compared. Pharmacists’ perceptions of MBA programs were evaluated through a survey of clinical preceptors affiliated with a school of pharmacy. Results. Seven US universities that offer an MBA program in pharmaceutical marketing and management were identified. Thirty-three percent of the 57 pharmacist preceptors who responded to the survey reported plans to pursue an MBA degree program. Respondents preferred MBA programs related to healthcare or pharmacy (66%) over general MBA programs (33%). Conclusion. An MBA in pharmaceutical marketing and management could provide pharmacists with advanced knowledge of the operational and strategic business aspects of pharmacy practice and give pharmacy graduates an advantage in an increasingly competitive job market. PMID:22611273

Availability and perceived value of masters of business administration degree programs in pharmaceutical marketing and management.

Science.gov (United States)

Alkhateeb, Fadi M; Clauson, Kevin A; Latif, David A

2012-05-10

To examine pharmacist-targeted master of business administration (MBA) degree programs and investigate pharmacists' perceptions regarding them. Specialized MBA programs in pharmaceutical marketing and management offered at US colleges and schools of pharmacy were identified in the literature and compared. Pharmacists' perceptions of MBA programs were evaluated through a survey of clinical preceptors affiliated with a school of pharmacy. Seven US universities that offer an MBA program in pharmaceutical marketing and management were identified. Thirty-three percent of the 57 pharmacist preceptors who responded to the survey reported plans to pursue an MBA degree program. Respondents preferred MBA programs related to healthcare or pharmacy (66%) over general MBA programs (33%). An MBA in pharmaceutical marketing and management could provide pharmacists with advanced knowledge of the operational and strategic business aspects of pharmacy practice and give pharmacy graduates an advantage in an increasingly competitive job market.

Advanced Fuel Cycle Initiative University Fellowship Program. Final Progress Report

International Nuclear Information System (INIS)

Dixon, Cathy

2012-01-01

2004-2011 Final Report for AFCI University Fellowship Program. The goal of this effort was to be supportive of university students and university programs - particularly those students and programs that will help to strengthen the development of nuclear-related fields. The program also supported the stability of the nuclear infrastructure and developed research partnerships that are helping to enlarge the national nuclear science technology base. In this fellowship program, the U.S. Department of Energy sought master's degree students in nuclear, mechanical, or chemical engineering, engineering/applied physics, physics, chemistry, radiochemistry, or fields of science and engineering applicable to the AFCI/Gen IV/GNEP missions in order to meet future U.S. nuclear program needs. The fellowship program identified candidates and selected full time students of high-caliber who were taking nuclear courses as part of their degree programs. The DOE Academic Program Managers encouraged fellows to pursue summer internships at national laboratories and supported the students with appropriate information so that both the fellows and the nation's nuclear energy objectives were successful.

Stressors Experienced by Nursing Students Enrolled in Baccalaureate Second Degree Accelerated Registered Nursing Programs

Science.gov (United States)

Bell, Charlene

2017-01-01

A mounting concern throughout the country is a current and growing nursing shortage. In order to meet the growing demand of nurses, many colleges have created baccalaureate second degree accelerated registered nursing programs. Stressors, experienced by nursing students in these accelerated programs, may affect their retention. A deeper…

Toys for Tots in Your Technology and Engineering Program

Science.gov (United States)

Berkeihiser, Mike

2016-01-01

Most technology and engineering (T&E) classes are elective, so teachers are always looking for ways to market programs, engage students, and remind administrators and school board members about the good things T&E teachers do with and for kids. In this article, the Unionville High School (PA) Technology and Engineering Department describes…

The New Sphere of International Student Education in Chinese Higher Education: A Focus on English-Medium Degree Programs

Science.gov (United States)

Kuroda, Chiharu

2014-01-01

This empirical study explores the current features of English-medium instructed master's degree programs for international students (EMIMDPs-ISs) in Chinese higher education. Since the mid-2000s, a significant number of Chinese universities have proactively engaged in establishing English-medium instructed degree programs for international…

Accreditation of Engineering Programs: An Evaluation of Current Practices in Malaysia

Science.gov (United States)

Said, Suhana Mohd; Chow, Chee-Onn; Mokhtar, N.; Ramli, Rahizar; Ya, Tuan Mohd Yusoff Shah Tuan; Sabri, Mohd Faizul Mohd

2013-01-01

The curriculum for undergraduate engineering courses in Malaysia is becoming increasingly structured, following the global trend for quality assurance in engineering education, through accreditation schemes. Generally, the accreditation criteria call for the graduates from engineering programs to demonstrate a range of skills, from technical…

Introducing PBL to Foreign Studentsin International Engineering Programs

DEFF Research Database (Denmark)

Du, Xiangyun; Dahms, Mona-Lisa; Jensen, Lars Peter

2007-01-01

programs to develop process competencies from an intercultural perspective. The POL course has had positive effects in terms of helping foreign students understand PBL and develop learning strategies in a PBL setting. However, our experiences show that issues arising from cultural diversity in educational...... to develop process competencies (i.e. skills in project management, collaboration, communication, etc.) in addition to technical skills. This paper presents the development of a course, the Project Organized Learning (POL) course, which has been designed to assist students in international engineering...... settings are more complex than only integrating foreign students into existing programs. More efforts and better strategies are needed to improve intercultural competencies for teaching staff and students, foreigners as well as locals, in engineering education....

A phenomenographic study of students' experiences with transition from pre-college engineering programs to first-year engineering

Science.gov (United States)

Salzman, Noah

Recent national dialogues on the importance of preparing more students for careers in Science, Technology, Engineering, and Mathematics has driven the development of formal and informal learning opportunities for children and adolescents to explore engineering. Despite the growth of these programs, relatively little research exists on how participation in these programs affects students who choose to pursue further study in engineering. The present study addressed this gap through an exploration of the different ways that First-Year Engineering students experience the transition from pre-college engineering to undergraduate engineering studies. Given the focus of this research on students' experiences, phenomenography was chosen to explore the phenomenon of transition from pre-college to first-year engineering at a large, public Midwestern university. This facilitated understanding the range of variation in the ways that students experienced this transition. Twenty-two students with different amounts of participation in a variety of different engineering programs were selected to be interviewed using a purposeful maximum variation sampling strategy. The interviews were guided by a semi-structured interview protocol that encouraged the participants to reflect on their pre-college engineering experiences, their experiences in First-Year Engineering, and the transition between the two domains. The interviews were analyzed using phenomenographic methods to develop an outcome space consisting of five qualitatively different but related ways of experiencing the transition from pre-college to First-Year Engineering. These categories of description included Foreclosure, Frustration, Tedium, Connection, and Engaging Others. With the exception of the first category which was characterized by a lack of passion and commitment to engineering, the remaining four categories formed a hierarchical relationship representing increasing integration in First-Year Engineering. The

Impacts of a Summer Bridge Program in Engineering on Student Retention and Graduation

Science.gov (United States)

Cançado, Luciana; Reisel, John R.; Walker, Cindy M.

2018-01-01

A summer bridge program was developed in an engineering program to advance the preparation of incoming freshmen students, particularly with respect to their math course placement. The program was intended to raise the initial math course placement of students who otherwise would begin their engineering studies in courses below Calculus I. One…

Curriculum Development Based on the Big Picture Assessment of the Mechanical Engineering Program

Science.gov (United States)

Sabri, Mohd Anas Mohd; Khamis, Nor Kamaliana; Tahir, Mohd Faizal Mat; Wahid, Zaliha; Kamal, Ahmad; Ihsan, Ariffin Mohd; Sulong, Abu Bakar; Abdullah, Shahrum

2013-01-01

One of the major concerns of the Engineering Accreditation Council (EAC) is the need for an effective monitoring and evaluation of program outcome domains that can be associated with courses taught under the Mechanical Engineering program. However, an effective monitoring method that can determine the results of each program outcome using Bloom's…

ESPACE - a geodetic Master's program for the education of Satellite Application Engineers

Science.gov (United States)

Hedman, K.; Kirschner, S.; Seitz, F.

2012-04-01

In the last decades there has been a rapid development of new geodetic and other Earth observation satellites. Applications of these satellites such as car navigation systems, weather predictions, and, digital maps (such as Google Earth or Google Maps) play a more and more important role in our daily life. For geosciences, satellite applications such as remote sensing and precise positioning/navigation have turned out to be extremely useful and are meanwhile indispensable. Today, researchers within geodesy, climatology, oceanography, meteorology as well as within Earth system science are all dependent on up-to-date satellite data. Design, development and handling of these missions require experts with knowledge not only in space engineering, but also in the specific applications. That gives rise to a new kind of engineers - satellite application engineers. The study program for these engineers combines parts of different classical disciplines such as geodesy, aerospace engineering or electronic engineering. The satellite application engineering program Earth Oriented Space Science and Technology (ESPACE) was founded in 2005 at the Technische Universität München, mainly from institutions involved in geodesy and aerospace engineering. It is an international, interdisciplinary Master's program, and is open to students with a BSc in both Science (e.g. Geodesy, Mathematics, Informatics, Geophysics) and Engineering (e.g. Aerospace, Electronical and Mechanical Engineering). The program is completely conducted in English. ESPACE benefits from and utilizes its location in Munich with its unique concentration of expertise related to space science and technology. Teaching staff from 3 universities (Technische Universität München, Ludwig-Maximilian University, University of the Federal Armed Forces), research institutions (such as the German Aerospace Center, DLR and the German Geodetic Research Institute, DGFI) and space industry (such as EADS or Kayser-Threde) are

An Educational Program for Newcomers to Enhance their Engineering Motivation and Creativity in Faculty of Engineering at Shizuoka University

Science.gov (United States)

Azuma, Naoto; Fujima, Nobuhisa; Nakamura, Tamotsu; Yamada, Shinkichi; Makizawa, Hisamitsu; Nakamura, Takato

In Faculty of Engineering at Shizuoka University, a new one-year educational program of mechatronics for newcomers will start at April in 2006. This program involves three stages designed to enhance their motivation and creativity in engineering. At the first and second stages, there are three activities; practicing digital circuits, controlling robots with Boe-Bot from Parallax Inc., and making their own microcontroller boards. At the third stage, each student cooperates with his team-mates to make a robot loaded his own board and through the game-type of competition the performance of each team-robot is scored. Through this program, we hope that our students enhance their engineering motivation and creativity.

Evolution of the Systems Engineering Education Development (SEED) Program at NASA Goddard Space Flight Center

Science.gov (United States)

Bagg, Thomas C., III; Brumfield, Mark D.; Jamison, Donald E.; Granata, Raymond L.; Casey, Carolyn A.; Heller, Stuart

2003-01-01

The Systems Engineering Education Development (SEED) Program at NASA Goddard Space Flight Center develops systems engineers from existing discipline engineers. The program has evolved significantly since the report to INCOSE in 2003. This paper describes the SEED Program as it is now, outlines the changes over the last year, discusses current status and results, and shows the value of human systems and leadership skills for practicing systems engineers.

Associate in science degree education programs: organization, structure, and curriculum.

Science.gov (United States)

Galvin, William F

2005-09-01

After years of discussion, debate, and study, the respiratory care curriculum has evolved to a minimum of an associate degree for entry into practice. Although programs are at liberty to offer the entry-level or advanced level associate degree, most are at the advanced level. The most popular site for sponsorship of the associate degree in respiratory care is the community college. The basis for community college sponsorship seems to be its comprehensive curriculum, which focuses on a strong academic foundation in writing, communication, and the basic sciences as well as supporting a career-directed focus in respiratory care. Issues facing the community college are tied to literacy, outcomes, assessment, placement,cooperation with the community, partnerships with industry, and articulation arrangements with granting institutions granting baccalaureate degrees. Community colleges must produce a literate graduate capable of thriving in an information-saturated society. Assessment and placement will intensify as the laissez-faire attitudes toward attendance and allowing students to select courses without any accountability and evaluation of outcome become less acceptable. Students will be required to demonstrate steady progress toward established outcomes. Maintaining relations and cooperation with the local community and the health care industry will continue to be a prominent role for the community college. The challenge facing associate degree education in respiratory care at the community college level is the ability to continue to meet the needs of an expanding professional scope of practice and to provide a strong liberal arts or general education core curriculum. The needs for a more demanding and expanding respiratory care curriculum and for a rich general education core curriculum have led to increased interest in baccalaureate and graduate degree education. The value of associate degree education at the community college level is well established. It is

The DNP/MPH Dual Degree: An Innovative Graduate Education Program for Advanced Public Health Nursing.

Science.gov (United States)

Shaw, Kathy; Harpin, Scott; Steinke, Geraldine; Stember, Marilyn; Krajicek, Marilyn

2017-03-01

Strong professional priorities, evolving Affordable Care Act requirements, and a significantly limited public health nursing workforce prompted the University of Colorado College of Nursing to collaborate with the School of Public Health to implement one of the first Doctor of Nursing Practice/Master of Public Health dual degree programs in the nation. Federal grant funding supported the development, implementation, and evaluation of this unique post-baccalaureate dual degree program, for which there were no roadmaps, models, or best practices to follow. Several key issues emerged that serve as lessons learned in creating a new, novel higher education pathway for Advanced Public Health Nursing. This paper highlights two of those: (1) marketing, admission, and matriculation across two programs, and (2) enhancing curricula through distance coursework and interprofessional education. When collaboration with a school of public health is possible, the Doctor of Nursing Practice/Master of Public Health dual degree is an efficient way to prepare public health nurses' with the highest level of public health knowledge, practice, and leadership expertise. © 2016 Wiley Periodicals, Inc.

Sustainability in engineering programs in a Portuguese Public University

Directory of Open Access Journals (Sweden)

Ciliana Regina Colombo

Full Text Available Abstract Rethink the interventions, human practices and their effects on the natural environment, for the preservation of life and biodiversity, threatened by the capitalist model of production, consumption and disposal, becomes each day more indispensable. The role of universities as knowledge building space is fundamental for the insertion of the environmental approach (greening in its various fronts (education, research, extension, and management. Following the line of several types of researches about the subject, this paper aims to identify if and how the issue of sustainability (e.g. through Project-Based Learning use is taught in the various engineering programs of a Portuguese Public University. This study was carried out by a documental research based on the programs´ curricula published in the official website of the university. The engineering programs selected included integrated master, master (second cycle and doctorate (third cycle. In this study, it was identified programs that are more focused on sustainability concepts than others, so the programs were classified in three categories: strongest, medium and weakest focus.

The Barrett Foundation: Undergraduate Research Program for Environmental Engineers and Scientists

Science.gov (United States)

Rizzo, D. M.; Paul, M.; Farmer, C.; Larson, P.; Matt, J.; Sentoff, K.; Vazquez-Spickers, I.; Pearce, A. R.

2007-12-01

A new program sponsored by The Barrett Foundation in the University of Vermont College of Engineering and Mathematical Sciences (UVM) supports undergraduate students in Environmental Engineering, Earth and Environmental Sciences to pursue independent summer research projects. The Barrett Foundation, a non-profit organization started by a UVM Engineering alum, provided a grant to support undergraduate research. Students must work with at least two different faculty advisors to develop project ideas, then independently prepare a research proposal and submit it to a faculty panel for review. The program was structured as a scholarship to foster a competitive application process. In the last three years, fourteen students have participated in the program. The 2007 Barrett Scholars projects include: - Using bacteria to change the chemistry of subsurface media to encourage calcite precipitation for soil stability and pollutant sequestration - Assessing structural weaknesses in a historic post and beam barn using accelerometers and wireless data collection equipment - Using image processing filters to 1) evaluate leaf wetness, a leading indicator of disease in crops and 2) assess the movement of contaminants through building materials. - Investigating the impact of increased water temperature on cold-water fish species in two Vermont streams. - Studying the impacts of light duty vehicle tailpipe emissions on air quality This program supports applied and interdisciplinary environmental research and introduces students to real- world engineering problems. In addition, faculty from different research focuses are presented the opportunity to establish new collaborations around campus through the interdisciplinary projects. To date, there is a successful publication record from the projects involving the Barrett scholars, including students as authors. One of the objectives of this program was to provide prestigious, competitive awards to outstanding undergraduate engineers

Stirling Space Engine Program. Volume 1; Final Report

Science.gov (United States)

Dhar, Manmohan

1999-01-01

The objective of this program was to develop the technology necessary for operating Stirling power converters in a space environment and to demonstrate this technology in full-scale engine tests. Hardware development focused on the Component Test Power Converter (CTPC), a single cylinder, 12.5-kWe engine. Design parameters for the CTPC were 150 bar operating pressure, 70 Hz frequency, and hot-and cold-end temperatures of 1050 K and 525 K, respectively. The CTPC was also designed for integration with an annular sodium heat pipe at the hot end, which incorporated a unique "Starfish" heater head that eliminated highly stressed brazed or weld joints exposed to liquid metal and used a shaped-tubed electrochemical milling process to achieve precise positional tolerances. Selection of materials that could withstand high operating temperatures with long life were another focus. Significant progress was made in the heater head (Udimet 700 and Inconel 718 and a sodium-filled heat pipe); the alternator (polyimide-coated wire with polyimide adhesive between turns and a polyimide-impregnated fiberglass overwrap and samarium cobalt magnets); and the hydrostatic gas bearings (carbon graphite and aluminum oxide for wear couple surfaces). Tests on the CTPC were performed in three phases: cold end testing (525 K), engine testing with slot radiant heaters, and integrated heat pipe engine system testing. Each test phase was successful, with the integrated engine system demonstrating a power level of 12.5 kWe and an overall efficiency of 22 percent in its maiden test. A 1500-hour endurance test was then successfully completed. These results indicate the significant achievements made by this program that demonstrate the viability of Stirling engine technology for space applications.

Psychology Degrees: Employment, Wage, and Career Trajectory Consequences.

Science.gov (United States)

Rajecki, D W; Borden, Victor M H

2011-07-01

Psychology is a very popular undergraduate major. Examining wage data from a range of degree holders reveals much about the expected career trajectories of those with psychology degrees. First, regarding baccalaureates, psychology and other liberal arts graduates-compared with those from certain preprofessional and technical undergraduate programs-generally fall in relatively low tiers of salary levels at both starting and later career points. Salary levels among baccalaureate alumni groups correlate with averaged measures of salary satisfaction, repeated job seeking, and perceptions of underemployment. These patterns seem to stem from the specific occupational categories (job titles) entered by graduates in psychology compared with other graduates, calling into question the employability advantage of so-called generic liberal arts skills. Second, psychology master's degree holders also generally fall in a low tier of salary among their science, engineering, and health counterparts. Third, psychology college faculty (including instructors) fall in low tiers of salary compared with their colleagues from other academic fields. Such broadly based indications of the relative economic disadvantages of psychology degrees have implications for career counseling in the field. © The Author(s) 2011.

Research and Education Program for Underrepresented Minority Engineering Students in the JIAFS

Science.gov (United States)

Whitesides, John L.

2000-01-01

This paper is a final report on Research and Education Program for Underrepresented Minority Engineering Students in the JIAFS (Joint Institute for Advancement of Flight Sciences). The objectives of the program were to conduct research at the NASA Langley Research Center and to increase the number of underrepresented minorities in aerospace engineering.

The Rise of Student-to-Student Learning: Youth-led Programs Impacting Engineering Education Globally

Directory of Open Access Journals (Sweden)

Julian O'Shea

2011-07-01

Full Text Available Around the globe, students and young engineers are playing an increasing role in the coordination and delivery of engineering education programs. Many youth-led initiatives are now conducted with students involved in all aspects of their creation, organisation and delivery. This trend presents an exciting opportunity for the education of engineering students, both those involved in delivery of the courses and for participants. This paper profiles four leading youth-led engineering education programs and analyses their structure and growth in recent years. Profiled are initiatives coordinated by Engineers Without Borders – Australia (EWB-A; the Board of European Students of Technology (BEST; the Electrical Engineering Students’ European Association (EESTEC; and the Student Platform for Engineering Education Development (SPEED. Each case study includes a brief history of the organisation, program overview, growth analysis and future projections. The common features amongst these programs were analysed, as were the aspects which made them distinct from traditional university offerings. Key findings about the initiatives include: an international focus; the mixture of formal learning and social aspects; an integral role of volunteers within the organisation; the use of residential programs; and the role of internal professional development of committee members and volunteers. Additionally, this paper outlines the benefits for universities and provides a guide for how engineering faculties can support and nurture these initiatives and effectively create partnerships.

Apollo experience report: Guidance and control systems. Engineering simulation program

Science.gov (United States)

Gilbert, D. W.

1973-01-01

The Apollo Program experience from early 1962 to July 1969 with respect to the engineering-simulation support and the problems encountered is summarized in this report. Engineering simulation in support of the Apollo guidance and control system is discussed in terms of design analysis and verification, certification of hardware in closed-loop operation, verification of hardware/software compatibility, and verification of both software and procedures for each mission. The magnitude, time, and cost of the engineering simulations are described with respect to hardware availability, NASA and contractor facilities (for verification of the command module, the lunar module, and the primary guidance, navigation, and control system), and scheduling and planning considerations. Recommendations are made regarding implementation of similar, large-scale simulations for future programs.

Perceptions of Community of Associate Degree Nurse Learners in an RN-to-BSN Online Program

Science.gov (United States)

Rebar, Cherie R.

2010-01-01

Registered Nurses (RNs), when educated in an Associate Degree (AD) program, learn in a face-to-face environment. Today's preferred standard of education for RNs is to achieve a minimum of a Bachelor's degree. For convenience while they continue working, numerous AD-prepared nurses seek online education to complete their Bachelor of Science in…

High School Pre-Engineering Programs: Do They Contribute to College Retention?

Science.gov (United States)

Cole, Belinda; High, Karen; Weinland, Kathryn

2013-01-01

The study examines the retention of students in the College of Engineering, Architecture and Technology at Oklahoma State University that enter college with a defined course sequence in a pre-engineering program from a regional career technology center as compared with the retention rates of university engineering students for the same time…

Effects of Degree of Superheat on the Running Performance of an Organic Rankine Cycle (ORC Waste Heat Recovery System for Diesel Engines under Various Operating Conditions

Directory of Open Access Journals (Sweden)

Kai Yang

2014-04-01

Full Text Available This study analyzed the variation law of engine exhaust energy under various operating conditions to improve the thermal efficiency and fuel economy of diesel engines. An organic Rankine cycle (ORC waste heat recovery system with internal heat exchanger (IHE was designed to recover waste heat from the diesel engine exhaust. The zeotropic mixture R416A was used as the working fluid for the ORC. Three evaluation indexes were presented as follows: waste heat recovery efficiency (WHRE, engine thermal efficiency increasing ratio (ETEIR, and output energy density of working fluid (OEDWF. In terms of various operating conditions of the diesel engine, this study investigated the variation tendencies of the running performances of the ORC waste heat recovery system and the effects of the degree of superheat on the running performance of the ORC waste heat recovery system through theoretical calculations. The research findings showed that the net power output, WHRE, and ETEIR of the ORC waste heat recovery system reach their maxima when the degree of superheat is 40 K, engine speed is 2200 r/min, and engine torque is 1200 N·m. OEDWF gradually increases with the increase in the degree of superheat, which indicates that the required mass flow rate of R416A decreases for a certain net power output, thereby significantly decreasing the risk of environmental pollution.

Software Engineering Education at Carnegie Mellon University: One University; Programs Taught in Two Places

Directory of Open Access Journals (Sweden)

Ray Bareiss

2009-10-01

Full Text Available Teaching Software Engineering to professional master‟s students is a challenging endeavor, and arguably for the past 20 years, Carnegie Mellon University has been quite successful. Although CMU teaches Software Engineering at sites world-wide and uses different pedagogies, the goal of the curriculum -- to produce world-class software engineers -- remains constant. This paper will discuss two of the most mature versions of Carnegie Mellon‟s Software Engineering program -- the main campus program and its "daughter program" at the Silicon Valley Campus. We discuss the programs with respect to the dimensions of curriculum, how students work and learn, how faculty teach, curricular materials, and how students are assessed to provide insight into how Carnegie Mellon continues to keep its programs fresh, to adapt them to local needs, and to meet its goal of excellence after 20 years.

A survey of program slicing for software engineering

Science.gov (United States)

Beck, Jon

1993-01-01

This research concerns program slicing which is used as a tool for program maintainence of software systems. Program slicing decreases the level of effort required to understand and maintain complex software systems. It was first designed as a debugging aid, but it has since been generalized into various tools and extended to include program comprehension, module cohesion estimation, requirements verification, dead code elimination, and maintainence of several software systems, including reverse engineering, parallelization, portability, and reuse component generation. This paper seeks to address and define terminology, theoretical concepts, program representation, different program graphs, developments in static slicing, dynamic slicing, and semantics and mathematical models. Applications for conventional slicing are presented, along with a prognosis of future work in this field.

An Undergraduate Nanotechnology Engineering Laboratory Course on Atomic Force Microscopy

Science.gov (United States)

Russo, D.; Fagan, R. D.; Hesjedal, T.

2011-01-01

The University of Waterloo, Waterloo, ON, Canada, is home to North America's first undergraduate program in nanotechnology. As part of the Nanotechnology Engineering degree program, a scanning probe microscopy (SPM)-based laboratory has been developed for students in their fourth year. The one-term laboratory course "Nanoprobing and…

Innovating in health care management education: development of an accelerated MBA and MPH degree program at Yale.

Science.gov (United States)

Pettigrew, Melinda M; Forman, Howard P; Pistell, Anne F; Nembhard, Ingrid M

2015-03-01

Increasingly, there is recognition of the need for individuals with expertise in both management and public health to help health care organizations deliver high-quality and cost-effective care. The Yale School of Public Health and Yale School of Management began offering an accelerated Master of Business Administration (MBA) and Master of Public Health (MPH) joint degree program in the summer of 2014. This new program enables students to earn MBA and MPH degrees simultaneously from 2 fully accredited schools in 22 months. Students will graduate with the knowledge and skills needed to become innovative leaders of health care organizations. We discuss the rationale for the program, the developmental process, the curriculum, benefits of the program, and potential challenges.

Influence of year-on-year performance on final degree classification in a chiropractic master's degree program.

Science.gov (United States)

Dewhurst, Philip; Rix, Jacqueline; Newell, David

2016-03-01

We explored if any predictors of success could be identified from end-of-year grades in a chiropractic master's program and whether these grades could predict final-year grade performance and year-on-year performance. End-of-year average grades and module grades for a single cohort of students covering all academic results for years 1-4 of the 2013 graduating class were used for this analysis. Analysis consisted of within-year correlations of module grades with end-of-year average grades, linear regression models for continuous data, and logistic regression models for predicting final degree classifications. In year 1, 140 students were enrolled; 85.7% of students completed the program 4 years later. End-of-year average grades for years 1-3 were correlated (Pearson r values ranging from .75 to .87), but the end-of-year grades for years 1-3 were poorly correlated with clinic internship performance. In linear regression, several modules were predictive of end-of-year average grades for each year. For year 1, logistic regression showed that the modules Physiology and Pharmacology and Investigative Imaging were predictive of year 1 performance (odds ratio [OR] = 1.15 and 0.9, respectively). In year 3, the modules Anatomy and Histopathology 3 and Problem Solving were predictors of the difference between a pass/merit or distinction final degree classification (OR = 1.06 and 1.12, respectively). Early academic performance is weakly correlated with final-year clinic internship performance. The modules of Anatomy and Histopathology year 3 and Problem Solving year 3 emerged more consistently than other modules as being associated with final-year classifications.

PERAN PROGRAM STUDI TEKNIK PANGAN (FOOD ENGINEERING UNTUK MENUNJANG PEMBANGUNAN INDUSTRI PANGAN DI INDONESIA [The Roles of Engineering fot the Development of Agro Industries in Indonesia

Directory of Open Access Journals (Sweden)

Suhargo

2005-08-01

Full Text Available At this time more than 60 % of Indonesian population still depend on the agricultural sector. Accordingly, in future agro and food industries are expected to be the main steppingstone for the economic development in Indonesia. In order to make the agricultural products competitive in the global market; it is necessary that the development of food or agro industries is supported by technology especially in the food product development and their processing. The food product development consist of food product design, process design, equipment and machinery design and packaging design. Consequently the food product development requires the knowledge of food science, and is necessary to be supported by the knowledge of engineering or know as food engineering. As a course, food engineering is already offered in the study program of food science and technology. However, food engineering is not developed yet as a study program as well as in the other countries, the study program in food engineering is necessarily different from the study program of food science and technology. Food engineering is scientific discipline to study and apply the engineering principles in food preservation, conservation, conversion and distribution. In several countries both study programs are paralely offered as two different study programs with deferent competence and knowledge. The competency of food engineering is mainly in the application of engineering knowledge for food design, design and construction of food process equipment, process design, process equipment operation and management. Accordingly, the content of the food engineering curriculum covers engineering and physics (50-60%, biology and food science (20-30% and other supporting knowledge’s (statics, communication, etc, 10-20%. The graduates in food engineering will have opportunities working as engineers as well as designing, constructing and operating process equipment in food industries

NASA/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1991

International Nuclear Information System (INIS)

Tiwari, S.N.

1991-09-01

In a series of collaborations between NASA research and development centers and nearby universities, engineering faculty members spent 10 weeks working with professional peers on research. The Summer Faculty Program Committee of the American Society of Engineering Education supervises the programs. The objects were the following: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate and exchange ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of the participants' institutions; and (4) to contribute to the research objectives of the NASA center

Enhancing the Programming Experience for First-Year Engineering Students through Hands-On Integrated Computer Experiences

Science.gov (United States)

Canfield, Stephen L.; Ghafoor, Sheikh; Abdelrahman, Mohamed

2012-01-01

This paper describes the redesign and implementation of the course, "Introduction to Programming for Engineers" using microcontroller (MCU) hardware as the programming target. The objective of this effort is to improve the programming competency for engineering students by more closely relating the initial programming experience to the student's…

Subseabed radioactive waste disposal feasibility program: ocean engineering challenges for the 80's

International Nuclear Information System (INIS)

Talbert, D.M.

1980-11-01

The objective of the Subseabed Disposal Program is to assess the feasibility of disposing of high-level radioactive wastes or spent fuel in suitable geologic formations beneath the deep ocean floor. The program is entering a phase which will address engineering feasibility. While the current phase of the program to determine the scientific and environmental feasibility of the concept is not yet complete, activities to assess the engineering aspects are being initiated in parallel to facilitate the development of the concept on a time scale commensurate with related programs both in the United States and abroad. It is anticipated that engineering aspects will become the central focus of the program during the early 80's and will continue so through the establishment of a pilot-plant level activity which could occur by the mid-90's

Subseabed Radioactive Waste Disposal Feasibility Program: ocean engineering challenges for the 80's

International Nuclear Information System (INIS)

Talbert, D.M.

1980-01-01

The objective of the Subseabed Disposal Program is to assess the feasibility of disposing of high-level radioactive wastes or spent fuel in suitable geologic formations beneath the deep ocean floor. The program is entering a phase which will address engineering feasibility. While the current phase of the program to determine the scientific and environmental feasibility of the concept is not yet complete, activities to assess the engineering aspects are being initiated in parallel to facilitate the development of the concept on a time scale commensurate with other related programs both in the United States and abroad. It is anticipated that engineering aspects will become the central focus of the program during the early 80's and will continue so through the establishment of a pilot-plant level activity which could occur by the mid-90's

Assessment of the Autonomous Learning Competence in Engineering Degree Courses at the Universitat Politècnica De Catalunya

Science.gov (United States)

Olmedo-Torre, Noelia; Farrerons Vidal, Oscar

2017-01-01

We present a strategy for the acquisition and assessment of autonomous learning conducted as part of the Graphic Expression in Engineering (GE) degree course during the first quarter at the Escola Universitària d'Enginyeria Tècnica Industrial de Barcelona (EUETIB). The strategy employed is the puzzle technique in the classroom and multiple-choice…

[Public health competencies and contents in Spanish university degree programs of physical therapy, occupational therapy, environmental science, dentistry and veterinary science].

Science.gov (United States)

Davó-Blanes, M Carmen; Vives-Cases, Carmen; Alvarez-Dardet, Carlos; Segura-Benedicto A, Andreu; Bosch Llonch, Fèlix; G Benavides, Fernando

2014-01-01

To identify the basic competencies and contents related to public health to be included in degree programs according to the perspective of lecturers from various Spanish universities. In the context of the Second Workshop on Public Health Contents in Degree Programs (Mahon, 19 to 20 September 2012), 20 lecturers from different Spanish universities were distributed in five working groups. The lecturers had been selected from the instructional guides on public health and epidemiology published on the web sites of the Rectors' Conference of Spanish Universities. Each group worked on a degree program and the results were discussed in plenary sessions. The activities and competencies related to the three basic functions of public health were identified in all degree programs. Most of the professional competencies identified were related to the function of «assessment of population health needs». The contents proposed by the working groups related to epidemiology, basic concepts in public health, public health intervention, health management, and health policy. The main common topics among the degrees concerned the first three contents. Public health professional competencies and contents were identified in the degree programs examined. These results may serve as a starting point for a more detailed review of public health programs across degree levels and the search for a consensus on the common content that should be included in each of them. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

Relevance Evaluation of Engineering Master's Program in Peru

OpenAIRE

Miñán, Erick; Lavalle, Carlos; Díaz-Puente, José M.

2012-01-01

In a context of mass higher education, it is necessary to ensure not only quality but also the relevance of engineering master's programs, namely the appropriateness of the objectives and outcomes to the needs and interests of the program beneficiaries. After a literature review we analyzed the evaluation models of three organizations in Peru: the Board of Evaluation, Accreditation and Certification of the University Education Quality CONEAU, the Institute of Quality and Accreditation of Comp...

THE TRAVELLING SALESMAN PROBLEM IN THE ENGINEERING EDUCATION PROGRAMMING CURRICULUM

OpenAIRE

Yevgeny Gayev; Vadim Kalmikov

2017-01-01

Objective: To make students familiar with the famous Traveling Salesman Problem (TSP) and suggest the latter to become a common exercise in engineering programming curriculum provided the students master computer science in the easy programming environment MATLAB. Methods: easy programming in MATLAB makes true such modern educational approach as “discovery based” methodology. Results: a MATLAB TSP-program oriented to Ukrainian map is suggested that allows to pictorially demonstrate the proces...

Datasets on demographic trends in enrollment into undergraduate engineering programs at Covenant University, Nigeria.

Science.gov (United States)

Popoola, Segun I; Atayero, Aderemi A; Badejo, Joke A; Odukoya, Jonathan A; Omole, David O; Ajayi, Priscilla

2018-06-01

In this data article, we present and analyze the demographic data of undergraduates admitted into engineering programs at Covenant University, Nigeria. The population distribution of 2649 candidates admitted into Chemical Engineering, Civil Engineering, Computer Engineering, Electrical and Electronics Engineering, Information and Communication Engineering, Mechanical Engineering, and Petroleum Engineering programs between 2002 and 2009 are analyzed by gender, age, and state of origin. The data provided in this data article were retrieved from the student bio-data submitted to the Department of Admissions and Student Records (DASR) and Center for Systems and Information Services (CSIS) by the candidates during the application process into the various engineering undergraduate programs. These vital information is made publicly available, after proper data anonymization, to facilitate empirical research in the emerging field of demographics analytics in higher education. A Microsoft Excel spreadsheet file is attached to this data article and the data is thoroughly described for easy reuse. Descriptive statistics and frequency distributions of the demographic data are presented in tables, plots, graphs, and charts. Unrestricted access to these demographic data will facilitate reliable and evidence-based research findings for sustainable education in developing countries.

Assessing and mitigating risks of engineering programs with lean management techniques

DEFF Research Database (Denmark)

Fritz, A.; Oehmen, Josef; Rebentisch, E.

2014-01-01

for a specific program are identified and how the effort for implementation of these lean best practices is estimated. Large-scale engineering programs have as results usually complex technical products or systems such as airplanes, satellites (GPS) or software programs, immense infrastructure efforts like...

Increasing the Retention of Females of Color in Engineering and Technology Degree Programs through Professional Development Activities

Directory of Open Access Journals (Sweden)

Felecia M. Nave

2009-02-01

Full Text Available This paper provides an overview of professional development activities designed to provide minority female engineering students with the knowledge and essential skills to enhance their preparedness to transition into the engineering workforce and their ability to sustain a successful career. Three professional development workshops are discussed that focused on such topics as breaking the glass ceiling, leadership, soft skills development, balancing technical and non-technical skill development, professional etiquette, mentoring, and creating a growth plan. Industry partnerships have been a critical component to the success of these activities.

Innovating in Health Care Management Education: Development of an Accelerated MBA and MPH Degree Program at Yale

Science.gov (United States)

Forman, Howard P.; Pistell, Anne F.; Nembhard, Ingrid M.

2015-01-01

Increasingly, there is recognition of the need for individuals with expertise in both management and public health to help health care organizations deliver high-quality and cost-effective care. The Yale School of Public Health and Yale School of Management began offering an accelerated Master of Business Administration (MBA) and Master of Public Health (MPH) joint degree program in the summer of 2014. This new program enables students to earn MBA and MPH degrees simultaneously from 2 fully accredited schools in 22 months. Students will graduate with the knowledge and skills needed to become innovative leaders of health care organizations. We discuss the rationale for the program, the developmental process, the curriculum, benefits of the program, and potential challenges. PMID:25706023

Repository-based software engineering program: Concept document

Science.gov (United States)

1992-01-01

This document provides the context for Repository-Based Software Engineering's (RBSE's) evolving functional and operational product requirements, and it is the parent document for development of detailed technical and management plans. When furnished, requirements documents will serve as the governing RBSE product specification. The RBSE Program Management Plan will define resources, schedules, and technical and organizational approaches to fulfilling the goals and objectives of this concept. The purpose of this document is to provide a concise overview of RBSE, describe the rationale for the RBSE Program, and define a clear, common vision for RBSE team members and customers. The document also provides the foundation for developing RBSE user and system requirements and a corresponding Program Management Plan. The concept is used to express the program mission to RBSE users and managers and to provide an exhibit for community review.

Development of Key Performance Indicators for the Engineering Technology Education Programs in Taiwan

Science.gov (United States)

Lee, Lung-Sheng; Lai, Chun-Chin

2004-01-01

In comparison with engineering, engineering technology is more practical and purposeful. The engineering technology education programs in Taiwan have been mainly offered in 56 universities/colleges of technology (UTs/CTs) and are anticipated to continuously improve their performance to prepare quality engineering technologists. However, it is…

Effects of Video Game-Based Instruction on Writing Achievement and Motivation in Postsecondary Accelerated Degree Programs

Science.gov (United States)

Lee, Michael C.

2017-01-01

The purpose of this quantitative experimental posttest-only control group research study was to determine the degree to which differences exist in outcomes between students using a video game-based instruction and students using a traditional non-video game-based instruction in accelerated degree program courses at a 4-year university in Illinois…

Exploring social support and job satisfaction among associate degree program directors in California.

Science.gov (United States)

Mintz-Binder, Ronda D; Fitzpatrick, Joyce J

2009-01-01

A troubling trend noted in California has been an increase in the number of open positions for program directors of associate degree registered nursing (ADRN) programs. Positions remain open for extended periods of time, and the number of qualified applicants for such positions is insufficient. The loss of and ensuing slow replacement of ADRN program directors can put these programs in jeopardy of student admission suspension, or, worse yet, closure by the state nursing board. In this exploratory study, variables of social support and job satisfaction were studied. Variables were found to be limited opportunities for peer interaction, expressed discontent, and retention concerns. A significant positive relationship between job satisfaction and social support was noted. Recommendations for future research are offered.

Responding to the call for globalization in nursing education: the implementation of the transatlantic double-degree program.

Science.gov (United States)

Hornberger, Cynthia A; Erämaa, Sirkka; Helembai, Kornélia; McCartan, Patrick J; Turtiainen, Tarja

2014-01-01

Increased demand for nurses worldwide has highlighted the need for a flexible nursing workforce eligible for licensure in multiple countries. Nursing's curricular innovation mirrors the call for reform within higher education including globalization of curricula (E. J. S. Hovenga, 2004; D. Nayyar, 2008; B. J. G. Wood, S. M. Tapsall, & G. N. Soutar, 2005), increased opportunities for student mobility exchanges, dialogue between different academic traditions, and mutual understanding and transparency between universities (J. González & R. Wagenaar, 2005). The European Union (EU) and United States have combined efforts to achieve these objectives by creating the Atlantis program in 2007 (U.S. Department of Education, 2011). This article describes experiences of four nursing programs participating in an Atlantis project to develop a double-degree baccalaureate program for undergraduate nursing students. Early learnings include increasing awareness and appreciation of essential curricular and performance competencies of the baccalaureate-prepared professional nurse. Challenges include language competency; variations in curriculum, cultural norms, student expectations, and learning assessment; and philosophical differences regarding first-level professional nurse preparation as specialist versus generalist. The Transatlantic Double Degree program has successfully implemented the double-degree program. Members have gained valuable insights into key issues surrounding the creation of a more uniform, yet flexible, educational standard between our countries. © 2014.

Early Engagement in Course-Based Research Increases Graduation Rates and Completion of Science, Engineering, and Mathematics Degrees.

Science.gov (United States)

Rodenbusch, Stacia E; Hernandez, Paul R; Simmons, Sarah L; Dolan, Erin L

2016-01-01

National efforts to transform undergraduate biology education call for research experiences to be an integral component of learning for all students. Course-based undergraduate research experiences, or CUREs, have been championed for engaging students in research at a scale that is not possible through apprenticeships in faculty research laboratories. Yet there are few if any studies that examine the long-term effects of participating in CUREs on desired student outcomes, such as graduating from college and completing a science, technology, engineering, and mathematics (STEM) major. One CURE program, the Freshman Research Initiative (FRI), has engaged thousands of first-year undergraduates over the past decade. Using propensity score-matching to control for student-level differences, we tested the effect of participating in FRI on students' probability of graduating with a STEM degree, probability of graduating within 6 yr, and grade point average (GPA) at graduation. Students who completed all three semesters of FRI were significantly more likely than their non-FRI peers to earn a STEM degree and graduate within 6 yr. FRI had no significant effect on students' GPAs at graduation. The effects were similar for diverse students. These results provide the most robust and best-controlled evidence to date to support calls for early involvement of undergraduates in research. © 2016 S. Rodenbusch et al. CBE—Life Sciences Education © 2016 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Bachelor of Science-Engineering Technology Program and Fuel Cell Education Program Concentration

Energy Technology Data Exchange (ETDEWEB)

Block, David L. [Florida Solar Energy Center, Cocoa, FL (United States); Sleiti, Ahmad [Univ. of North Carolina, Charlotte, NC (United States)

2011-09-19

The Hydrogen and Fuel Cell Technology education project has addressed DOE goals by supplying readily available, objective, technical, and accurate information that is available to students, industry and the public. In addition, the program has supplied educated trainers and training opportunities for the next generation workforce needed for research, development, and demonstration activities in government, industry, and academia. The project has successfully developed courses and associated laboratories, taught the new courses and labs and integrated the HFCT option into the accredited engineering technology and mechanical engineering programs at the University of North Carolina at Charlotte (UNCC). The project has also established ongoing collaborations with the UNCC energy related centers of the Energy Production & Infrastructure Center (EPIC), the NC Motorsports and Automotive Research Center (NCMARC) and the Infrastructure, Design, Environment and Sustainability Center (IDEAS). The results of the project activities are presented as two major areas – (1) course and laboratory development, offerings and delivery, and (2) program recruitment, promotions and collaborations. Over the project period, the primary activity has been the development and offering of 11 HFCT courses and accompanying laboratories. This process has taken three years with the courses first being developed and then offered each year over the timeframe.

Women in Engineering Program Advocates Network (WEPAN): Evaluation of the seventh annual conference

Energy Technology Data Exchange (ETDEWEB)

Brainard, S.G.

1996-08-01

The primary goals of the 1996 WEPAN Conference were to: (1) Conduct technical and programmatic seminars for institutions desiring to initiate, replicate, or expand women in engineering programs; (2) Provide assistance in fundraising and grant writing; (3) Profile women in engineering programs of excellence; (4) Sponsor inspiring, knowledgeable and motivational keynote speakers; and, (5) Offer a series of workshops focused on topics such as: establishing partnerships with industry, current research findings, retention strategies, issues affecting special populations, and early intervention techniques. In an effort to provide greater access for women to engineering careers, women in engineering program directors at Purdue University, Stevens Institute of Technology and the University of Washington joined together in 1990 to establish WEPAN, a national network of individuals interested in the recruitment, admission, retention, and graduation of women engineering students. This is the seventh year of operation. Success of this effort has been reflected in numerous ways: increased membership in the organization; increased number of women in engineering programs; increased number of women graduating in engineering; and grants from the U.S. Department of Energy, the National Science Foundation, the Alfred P. Sloan Foundation, the AT&T Foundation, and many other corporations to carry out the goals of WEPAN. The Seventh Annual Women in Engineering Conference entitled, Capitalizing on Today`s Challenges, was held in Denver, Colorado on June 1-4, 1996 at the Hyatt Regency. The conference brought together representatives from academia, government, and industry and examined current issues and initiatives for women in technology, science, and education. Building on the successes of the previous conferences, the seventh conference offered a new variety of speakers and topics.

Systems Engineering in the Development and Implementation of the Savannah River Site Transuranic Waste Disposition Program

International Nuclear Information System (INIS)

Fayfich, R.R.

1999-01-01

The use of systems engineering facilitated the strategic planning and implementation of the Savannah River Site (SRS) transuranic waste disposal program. This application represented the first SRS use of systems engineering in the pre-program planning stages during the development of a comprehensive strategic plan for the disposal of transuranic waste at the Department of Energy Waste Isolation Pilot Plant (WIPP) in Carlsbad, New Mexico. The use of systems engineering focused the efforts of the technical experts to devise a three initiative plan for the disposal of transuranic waste where previous efforts failed. Continued application of systems engineering facilitated the further development and implementation of the first initiative outlined in the strategic plan, i.e., set-up the program and process to begin to characterize and ship waste to the WIPP.This application of systems engineering to the transuranic waste program represented the first opportunity at the SRS for a comprehensive usage of systems engineering at all program levels. The application was initiated at the earliest possible point in the program development, i.e., strategic planning, and successively was used in detailed development and implementation of the program. Systems engineering successfully focused efforts to produce a comprehensive plan for the disposal of SRS transuranic waste at the WIPP, and facilitated development of the SRS capability and infrastructure to characterize, certify, and ship waste

The First Hydrology (Geoscience) Degree at a Tribal College or University: Salish Kootenai College

Science.gov (United States)

Lesser, G.; Berthelote, A. R.

2010-12-01

A new Hydrology Degree Program was developed at Salish and Kootenai College in western Montana. This program will begin to address the fact that our nation only awards 20 to 30 Geoscience degrees annually to Native American students. Previously absent from SKC and the other 36 Tribal Colleges or Universities (TCU) Science, Technology, Engineering, and Mathematics (STEM) related programs are specific Geoscience disciplines, particularly those focusing on hydrological and water based sciences. Though 23 TCU’s offer some classes to supplement their environmental science or natural resource programs. This program is timely and essential for addressing the concerns that Native Americans have who maintain sovereignty over approximately 20% of our nation’s fresh water resources which are becoming more stressed each year. The overall objective of this new SKC Hydrology degree program is to produce students who are able to “give voice” to the perspectives of Native peoples on natural resources and particularly water-related issues, including water rights, agriculture, environmental health (related to water), beliefs and spirituality related to water, and sustainability of water resources. It will provide the opportunity for interdisciplinary study in physical, chemical, and biological water resources and their management. Students will gain theoretical, conceptual, computational, and practical knowledge/experiences in quantifying, monitoring, qualifying, and managing today’s water resource challenges with particular emphasis on Tribal lands. Completion of the Associate of Science Degree will provide the student with the necessary skills to work as a hydrology- water quality- or geo-technician within the Reservation area, the U. S. Forest Service, the Environmental Protection Agency, the Bureau of Reclamation, the United States Geological Society, and other earth science disciplines. The Bachelor’s Degree program provides students with a broad-based theoretical

49 CFR Appendix B to Part 599 - Engine Disablement Procedures for the CARS Program

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Engine Disablement Procedures for the CARS Program B Appendix B to Part 599 Transportation Other Regulations Relating to Transportation (Continued...—Engine Disablement Procedures for the CARS Program ER29JY09.006 ...

Silicon Carbide Defect Qubits/Quantum Memory with Field-Tuning: OSD Quantum Science and Engineering Program (QSEP)

Science.gov (United States)

2017-08-01

TECHNICAL REPORT 3073 August 2017 Silicon Carbide Defect Qubits/Quantum Memory with Field-tuning: OSD Quantum Science and Engineering Program...Quantum Science and Engineering Program) by the Advanced Concepts and Applied Research Branch (Code 71730), the Energy and Environmental Sustainability...the Secretary of Defense (OSD) Quantum Science and Engineering Program (QSEP). Their collaboration topic was to examine the effect of electric-field

Training of Ability for Engineering Design through Long Term Internship Program

Science.gov (United States)

Konishi, Masami; Gofuku, Akio; Tomita, Eiji

The education program for engineering design capabilities through long term internship of Okayama University had started in 2006. The program supported by the MEXT is aimed to educate students in the Graduate School of Natural Science and Technology of Okayama University. The internship satellite laboratory of the University is settled in the near place of collaborative companies in which students are engaged with the project themes extracted from problems in the factory of collaborative companies. Through the program, promotion of abilities for setup and solving a problem considering cost and due date together with performance of the solution. Students are also expected to gain knowledge on patent and ethics required for skillful engineers.

Solving the Fully Fuzzy Bilevel Linear Programming Problem through Deviation Degree Measures and a Ranking Function Method

Directory of Open Access Journals (Sweden)

Aihong Ren

2016-01-01

Full Text Available This paper is concerned with a class of fully fuzzy bilevel linear programming problems where all the coefficients and decision variables of both objective functions and the constraints are fuzzy numbers. A new approach based on deviation degree measures and a ranking function method is proposed to solve these problems. We first introduce concepts of the feasible region and the fuzzy optimal solution of a fully fuzzy bilevel linear programming problem. In order to obtain a fuzzy optimal solution of the problem, we apply deviation degree measures to deal with the fuzzy constraints and use a ranking function method of fuzzy numbers to rank the upper and lower level fuzzy objective functions. Then the fully fuzzy bilevel linear programming problem can be transformed into a deterministic bilevel programming problem. Considering the overall balance between improving objective function values and decreasing allowed deviation degrees, the computational procedure for finding a fuzzy optimal solution is proposed. Finally, a numerical example is provided to illustrate the proposed approach. The results indicate that the proposed approach gives a better optimal solution in comparison with the existing method.

Engineering opportunities in nuclear engineering

International Nuclear Information System (INIS)

Walton, D.G.

1980-01-01

The pattern of education and training of Nuclear Engineers in the UK is outlined under the headings; degree courses for professional engineers, postgraduate courses, education of technician engineers. Universities which offer specific courses are stated and useful addresses listed. (UK)

Case study of a problem-based learning course of physics in a telecommunications engineering degree

Science.gov (United States)

Macho-Stadler, Erica; Jesús Elejalde-García, Maria

2013-08-01

Active learning methods can be appropriate in engineering, as their methodology promotes meta-cognition, independent learning and problem-solving skills. Problem-based learning is the educational process by which problem-solving activities and instructor's guidance facilitate learning. Its key characteristic involves posing a 'concrete problem' to initiate the learning process, generally implemented by small groups of students. Many universities have developed and used active methodologies successfully in the teaching-learning process. During the past few years, the University of the Basque Country has promoted the use of active methodologies through several teacher training programmes. In this paper, we describe and analyse the results of the educational experience using the problem-based learning (PBL) method in a physics course for undergraduates enrolled in the technical telecommunications engineering degree programme. From an instructors' perspective, PBL strengths include better student attitude in class and increased instructor-student and student-student interactions. The students emphasised developing teamwork and communication skills in a good learning atmosphere as positive aspects.

Implementation of Effective Capstone Projects in Undergraduate Manufacturing Design Engineering Program

Science.gov (United States)

Viswanathan, Shekar

2017-01-01

Final program projects (capstone course) in manufacturing design engineering technology at National University are intensive experiences in critical thinking and analysis, designed to broaden students' perspectives and provide an opportunity for integration of coursework in the area of manufacturing design engineering. This paper focuses on three…

Preparing technicians for engineering materials technology

Science.gov (United States)

Jacobs, James A.; Metzloff, Carlton H.

1990-01-01

A long held principle is that for every engineer and scientist there is a need for ten technicians to maximize the efficiency of the technology team for meeting needs of industry and government. Developing an adequate supply of technicians to meet the requirements of the materials related industry will be a challenge and difficult to accomplish. A variety of agencies feel the need and wish to support development of engineering materials technology programs. In a joint effort among Battelle Laboratories, the Department of Energy (DOE) and Northwest College and University Association for Science (NORCUS), the development of an engineering materials technology program for vocational programs and community colleges for the Pacific Northwest Region was recently completed. This effort has implications for a national model. The model Associate of Applied Science degree in Engineering Materials Technology shown provides a general structure. It purposely has course titles which need delimiting while also including a core of courses necessary to develop cognitive, affective and psychomotor skills with the underlining principles of math, science and technology so students have job entry skills, and so that students can learn about and adapt to evolving technology.

Generic Competencies in the Education of Engineers: The Case of Engineering Program in a Public University in Mexico

Science.gov (United States)

Serna, Alejandra García; Vega, José Luis Arcos; García, Juan José Sevilla; Ruiz, María Amparo Oliveros

2018-01-01

We present an analysis regarding generic skills on engineering program offered in a public state university in Mexico (UABC). The university implemented a new educational model changing rigid programs to flexible programs based on competencies. The goal is to determine generic skills related to the four pillars of learning: learning to do,…

Nuclear engineering 24/7 via distance learning: Course development and management experiences

International Nuclear Information System (INIS)

Maldonado, G. I.; Christenson, J.; Spitz, H.; Rutz, E.; Todd, A.

2006-01-01

This article summarizes a few lessons learned in our early experiences in developing, delivering and implementing a series of distance learning classes for full-time undergraduate students enrolled in the combined-degree BS Mechanical + MS Nuclear Engineering 5-year and co-op based 'MNE- ACCEND' program at the Univ. of Cincinnati. This program is in its third year since inception and currently hosts approximately 35 undergraduate students enrolled in the graduating classes of 2008, 2009, and 2010, which is when these students are expected to complete their BS Mechanical and MS Nuclear Engineering degrees. In addition, 20+ newly confirmed students are expected to enter this program in the fall quarter of 2006 to become our Class of 2011. Therefore, the successful 'follow through' of the DL component of this program continues to be increasingly crucial as this student pipeline reaches a targeted steady-state of about 10 to 15 graduates per class. (authors)

Public health engineering education in India: current scenario, opportunities and challenges.

Science.gov (United States)

Hussain, Mohammad Akhtar; Sharma, Kavya; Zodpey, Sanjay

2011-01-01

Public health engineering can play an important and significant role in solving environmental health issues. In order to confront public health challenges emerging out of environmental problems we need adequately trained public health engineers / environmental engineers. Considering the current burden of disease attributable to environmental factors and expansion in scope of applications of public health / environmental engineering science, it is essential to understand the present scenario of teaching, training and capacity building programs in these areas. Against this background the present research was carried out to know the current teaching and training programs in public health engineering and related disciplines in India and to understand the potential opportunities and challenges available. A systematic, predefined approach was used to collect and assemble the data related to various teaching and training programs in public health engineering / environmental engineering in India. Public health engineering / environmental engineering education and training in the country is mainly offered through engineering institutions, as pre-service and in-service training. Pre-service programs include diploma, degree (graduate) and post-graduate courses affiliated to various state technical boards, institutes and universities, whereas in-service training is mainly provided by Government of India recognized engineering and public health training institutes. Though trainees of these programs acquire skills related to engineering sciences, they significantly lack in public health skills. The teaching and training of public health engineering / environmental engineering is limited as a part of public health programs (MD Community Medicine, MPH, DPH) in India. There is need for developing teaching and training of public health engineering or environmental engineering as an interdisciplinary subject. Public health institutes can play an important and significant role in this

Education and training in nuclear science/engineering in Taiwan

International Nuclear Information System (INIS)

Chung, C.

1994-01-01

The present status of nuclear education and training in Taiwan is reviewed. The nuclear science/engineering program has been established in Taiwan under the College of Nuclear Science at the National Tsing Hua University since 1956; it remains the only program among 123 universities and colleges in Taiwan where education and training in nuclear fields are offered. The program, with 52 faculty members, offers advanced studies leading to BSc, MSc, and PhD degrees. Lectures and lab classes are given to 600 students currently registered in the program. Career placement program geared for the 200 graduate and 400 undergraduate students is to orientate them into the local nuclear power utilities as well as agricultural, medical, industrial, academic and governmental sectors where nuclear scientists and engineers at all levels are needed. 8 refs., 1 fig

Nuclear criticality safety program at the University of Tennessee-Knoxville

International Nuclear Information System (INIS)

Basoglu, B.; Bentley, C.; Brewer, R.; Dunn, M.; Haught, C.; Plaster, M.; Wilkinson, A.; Dodds, H.; Elliott, E.; Waddell, W.

1993-01-01

This paper presents an overview of the nuclear criticality safety (NCS) educational program at the University of Tennessee-Knoxville. The program is an academic specialization for nuclear engineering graduate students pursuing either the MS or PhD degree and includes special NCS courses and NCS research projects. Both the courses and the research projects serve as partial fulfillment of the requirements for the degree being pursued

Appropriate Programs for Foreign Students in U.S. Chemical Engineering Curricula.

Science.gov (United States)

Findley, M. E.

Chemical engineers in developing countries may need abilities in a number of diverse areas including management, planning, chemistry, equipment, processes, politics, and improvisation. Chemical engineering programs for foreign students can be arranged by informed advisers with student input for inclusion of some of these areas in addition to…

Definition study of a Variable Cycle Experimental Engine (VCEE) and associated test program and test plan

Science.gov (United States)

Allan, R. D.

1978-01-01

The Definition Study of a Variable Cycle Experimental Engine (VCEE) and Associated Test Program and Test Plan, was initiated to identify the most cost effective program for a follow-on to the AST Test Bed Program. The VCEE Study defined various subscale VCE's based on different available core engine components, and a full scale VCEE utilizing current technology. The cycles were selected, preliminary design accomplished and program plans and engineering costs developed for several program options. In addition to the VCEE program plans and options, a limited effort was applied to identifying programs that could logically be accomplished on the AST Test Bed Program VCE to extend the usefulness of this test hardware. Component programs were provided that could be accomplished prior to the start of a VCEE program.

A Qualitative Study of African American Women in Engineering Technology Programs in Community Colleges

Science.gov (United States)

Blakley, Jacquelyn

2016-01-01

This study examined the experiences of African American women in engineering technology programs in community colleges. There is a lack of representation of African American women in engineering technology programs throughout higher education, especially in community/technical colleges. There is also lack of representation of African American…

Pursuit of STEM: Factors shaping degree completion for African American females in STEM

Science.gov (United States)

Wilkins, Ashlee N.

The primary purpose of the study was to examine secondary data from the Cooperative Institutional Research Program (CIRP) Freshman and College Senior Surveys to investigate factors shaping degree aspirations for African American female undergraduates partaking in science, technology, engineering, and mathematics (STEM) majors. Hierarchical multiple regression was used to analyze the data and identify relationships between independent variables in relation to the dependent variable. The findings of the study reveal four key variables that were predictive of degree completion for African American females in STEM. Father's education, SAT composite, highest degree planned, and self-perception were positive predictors for females; while independent variable overall sense of community among students remained a negative predictor. Lastly implications for education and recommendations for future research were discussed.

Development of a competency mapping tool for undergraduate professional degree programmes, using mechanical engineering as a case study

Science.gov (United States)

Holmes, David W.; Sheehan, Madoc; Birks, Melanie; Smithson, John

2018-01-01

Mapping the curriculum of a professional degree to the associated competency standard ensures graduates have the competence to perform as professionals. Existing approaches to competence mapping vary greatly in depth, complexity, and effectiveness, and a standardised approach remains elusive. This paper describes a new mapping software tool that streamlines and standardises the competency mapping process. The available analytics facilitate ongoing programme review, management, and accreditation. The complete mapping and analysis of an Australian mechanical engineering degree programme is described as a case study. Each subject is mapped by evaluating the amount and depth of competence development present. Combining subject results then enables highly detailed programme level analysis. The mapping process is designed to be administratively light, with aspects of professional development embedded in the software. The effective competence mapping described in this paper enables quantification of learning within a professional degree programme, and provides a mechanism for holistic programme improvement.

Determinants of Self-Reflective Learning and Its Consequences in Online Master Degree Programs

Science.gov (United States)

Neumann, Yoram; Neumann, Edith; Lewis, Shelia

2017-01-01

Based on recent studies of self-reflective learning and its effects on various learning outcomes, this study examined the concept of self-reflective learning in the context of the Robust Learning Model (RLM), which is a learning model designed for improving the educational effectiveness of online degree programs. Two models were introduced to…

Technical specification optimization program - engineered safety features

International Nuclear Information System (INIS)

Andre, G.R.; Jansen, R.L.

1986-01-01

The Westinghouse Technical Specification Program (TOP) was designed to evaluate on a quantitative basis revisions to Nuclear Power Plant Technical Specifications. The revisions are directed at simplifying plant operation, and reducing unnecessary transients, shutdowns, and manpower requirements. In conjunction with the Westinghouse Owners Group, Westinghouse initiated a program to develop a methodology to justify Technical Specification revisions; particularly revisions related to testing and maintenance requirements on plant operation for instrumentation systems. The methodology was originally developed and applied to the reactor trip features of the reactor protection system (RPS). The current study further refined the methodology and applied it to the engineered safety features of the RPS

Labor market trends for nuclear engineers through 2000

International Nuclear Information System (INIS)

Seltzer, N.; Blair, L.M.; Baker, J.G.

1995-01-01

Throughout most of the 1980s, both private organizations and government agencies were concerned about the availability of an adequate supply of qualified nuclear engineers. This concern was primarily the result of a number of nuclear engineering academic programs being eliminated coupled with a continuous decline in graduate and undergraduate enrollments and degrees. By the early 1990s, the number of degrees and available supply had declined to new lows, but cutbacks in funding for the nuclear weapons program and nuclear energy R ampersand D, and in hiring by the electric utility industry, offset in large measure the declining supply. Recently, concerns about environment and waste management and about nuclear safety have again generated questions about the adequacy of supply of qualified personnel for nuclear energy activities. This report briefly examines the nuclear engineering labor market. Trends in employment, new graduates, job openings, and salaries are reviewed as a basis for understanding the current labor market. This review is then used as a basis for assessing future employment needs and new graduate supply to provide an outlook for future labor market conditions through 2000

Leadership in Dental Hygiene Degree Completion Programs: A Pilot Study Comparing Stand-Alone Leadership Courses and Leadership-Infused Curricula.

Science.gov (United States)

Smith, Michelle L; Gurenlian, JoAnn R; Freudenthal, Jacqueline J; Farnsworth, Tracy J

2016-05-01

The aim of this study was to define the extent to which leadership and leadership skills are taught in dental hygiene degree completion programs by comparing stand-alone leadership courses/hybrid programs with programs that infuse leadership skills throughout the curricula. The study involved a mixed-methods approach using qualitative and quantitative data. Semi-structured interviews were conducted with program directors and faculty members who teach a stand-alone leadership course, a hybrid program, or leadership-infused courses in these programs. A quantitative comparison of course syllabi determined differences in the extent of leadership content and experiences between stand-alone leadership courses and leadership-infused curricula. Of the 53 U.S. dental hygiene programs that offer degree completion programs, 49 met the inclusion criteria, and 19 programs provided course syllabi. Of the program directors and faculty members who teach a stand-alone leadership course or leadership-infused curriculum, 16 participated in the interview portion of the study. The results suggested that competencies related to leadership were not clearly defined or measurable in current teaching. Reported barriers to incorporating a stand-alone leadership course included overcrowded curricula, limited qualified faculty, and lack of resources. The findings of this study provide a synopsis of leadership content and gaps in leadership education for degree completion programs. Suggested changes included defining a need for leadership competencies and providing additional resources to educators such as courses provided by the American Dental Education Association and the American Dental Hygienists' Association.

Lessons Learned on University Education Programs of Chemical Engineering Principles for Nuclear Plant Operations - 13588

International Nuclear Information System (INIS)

Ryu, Jun-hyung

2013-01-01

University education aims to supply qualified human resources for industries. In complex large scale engineering systems such as nuclear power plants, the importance of qualified human resources cannot be underestimated. The corresponding education program should involve many topics systematically. Recently a nuclear engineering program has been initiated in Dongguk University, South Korea. The current education program focuses on undergraduate level nuclear engineering students. Our main objective is to provide industries fresh engineers with the understanding on the interconnection of local parts and the entire systems of nuclear power plants and the associated systems. From the experience there is a huge opportunity for chemical engineering disciple in the context of giving macroscopic overview on nuclear power plant and waste treatment management by strengthening the analyzing capability of fundamental situations. (authors)

REQUIREMENT VERIFICATION AND SYSTEMS ENGINEERING TECHNICAL REVIEW (SETR) ON A COMMERCIAL DERIVATIVE AIRCRAFT (CDA) PROGRAM

Science.gov (United States)

2017-09-01

VERIFICATION AND SYSTEMS ENGINEERING TECHNICAL REVIEW (SETR) ON A COMMERCIAL DERIVATIVE AIRCRAFT (CDA) PROGRAM by Theresa L. Thomas September... ENGINEERING TECHNICAL REVIEW (SETR) ON A COMMERCIAL DERIVATIVE AIRCRAFT (CDA) PROGRAM 5. FUNDING NUMBERS 6. AUTHOR(S) Theresa L. Thomas 7...CODE 13. ABSTRACT (maximum 200 words) The Naval Air Systems Command (NAVAIR) systems engineering technical review (SETR) process does not

The McBride Honors Program in Public Affairs for Scientists and Engineers

Science.gov (United States)

Harrison, W. J.; Miller, R. L.; Olds, B. M.; Sacks, A. B.

2006-12-01

The McBride Honors Program in Public Affairs at The Colorado School of Mines (CSM), instituted in 1978, is an award-winning exemplar in the liberal arts which provides a select number of CSM engineering students an opportunity to cross the boundaries of their technical expertise in engineering and applied science, and to gain the understanding and appreciation of the contexts in which engineering and applied science and all human systems reside, and specifically to explore and integrate the social, cultural, ethical and environmental implications of their future professional judgments and their roles as citizens in varied and complex settings. The 27 semester-hour program of seminars, courses, and off-campus activities features small seminars; a cross-disciplinary approach; and opportunities for one-on-one faculty tutorials, instruction and practice in oral and written communication, a Washington, D.C. public policy seminar, a practicum experience (internship or foreign study). Circumstances external to the McBride Program itself, which include the development and growth of the field of Public Affairs nationally and the persistence of legacy courses, have created the need to revitalize and refocus the historically cross-departmental Program. A recent curriculum reform effort has achieved a more thoroughly interdisciplinary learning experience to educate engineers and scientists who, as called for in the National Academy of Engineering's The Engineer of 2020 "will assume leadership positions from which they can serve as positive influences in the making of public policy and in the administration of government and industry". In this presentation we showcase best practices in curriculum reform, exemplified by a seminar in National policy analysis where students and faculty have recently investigated federal science funding decisions in support of natural hazards including earthquakes, tsunamis, wildland fires, and pandemic disease.

Engine Fundamentals: Automotive Mechanics Instructional Program. Block 2.

Science.gov (United States)

O'Brien, Ralph D.

The second of six instructional blocks in automotive mechanics, the lessons and supportive information in the document provide a guide for teachers in planning an instructional program in engine fundamentals at the secondary and postsecondary level. The material, as organized, is a suggested sequence of instruction within each block. Each lesson…

Accreditation of Biomedical Engineering Programs in Europe - Challenge and Opportunity

National Research Council Canada - National Science Library

Nagel, Joachim

2001-01-01

Today, more than 100 universities and polytechnic schools in Europe offer educational programs in Biomedical Engineering at all academic levels, but without any international coordination of contents...

First year engineering students: Perceptions of engineers and engineering work amongst domestic and international students

Directory of Open Access Journals (Sweden)

Dawn Bennett

2015-03-01

Full Text Available Despite being well ahead of many other disciplines in establishing strong and evidence-based research and practice, engineering in many countries still experiences high rates of student and graduate attrition. One possible reason for this is that students enter engineering study without understanding the realities of either their degree program or engineering work, and without a sense of motivation and commitment. The research reported here aimed to extend understanding of first year engineering students’ thinking about their competencies, identity, self-efficacy, motivation, and career. The study involved over 1,100 first year engineering students enrolled in a common first year unit. Responses were coded using the Engineers Australia graduate competencies as a framework, and this paper reports findings from the most diverse cohort of students (n=260, of whom 49% were international students with English as their second language. The research identified differences between international and domestic students’ perceptions of self and of career competencies, possibly related to self-esteem. Implications include improved confidence and motivation to learn as students consider their strengths, interests and goals. Further, the research raises the need for analysis of international students’ cultural and educational background to determine how different cohorts of international students self-appraise and how they associate learning with their future careers.

Program of Research in Aeronautics

Science.gov (United States)

1981-01-01

A prospectus of the educational and research opportunities available at the Joint Institute for Advancement of Flight Sciences, operated at NASA Langley Research Center in conjunction with George Washington University's School of Engineering and Applied Sciences is presented. Requirements of admission to various degree programs are given as well as the course offerings in the areas of acoustics, aeronautics, environmental modelling, materials science, and structures and dynamics. Research facilities for each field of study are described. Presentations and publications (including dissertations and theses) generated by each program are listed as well as faculty members visting scientists and engineers.

Nuclear Explosion Monitoring Research and Engineering Program - Strategic Plan

Energy Technology Data Exchange (ETDEWEB)

Casey, Leslie A. [DOE/NNSA

2004-09-01

The Department of Energy (DOE)/National Nuclear Security Administration (NNSA) Nuclear Explosion Monitoring Research and Engineering (NEM R&E) Program is dedicated to providing knowledge, technical expertise, and products to US agencies responsible for monitoring nuclear explosions in all environments and is successful in turning scientific breakthroughs into tools for use by operational monitoring agencies. To effectively address the rapidly evolving state of affairs, the NNSA NEM R&E program is structured around three program elements described within this strategic plan: Integration of New Monitoring Assets, Advanced Event Characterization, and Next-Generation Monitoring Systems. How the Program fits into the National effort and historical accomplishments are also addressed.

Measuring Direct Teaching Costs: Does an Undergraduate Business Degree Cost More to Produce than a Nonbusiness Degree?

Science.gov (United States)

Barth, Michael M.; Karagiannidis, Iordanis

2016-01-01

Many universities have implemented tuition differentials for certain undergraduate degree programs, citing higher degree costs or higher demand. However, most college accounting systems are unsuited for measuring cost differentials by degree program. This research outlines a method that can convert commonly available financial data to a more…

MOOC construction and application in professional degree postgraduate education: taking Introduction to Engineering Optics as an example

Science.gov (United States)

Hu, Feng; Zhou, Jin-peng; Wang, Xing-shu

2017-08-01

Aiming at the deficiency of the traditional postgraduate education mode for professional degree, such as the conflict between work and study, restricted supply and demand and poor efficiency of course teaching, the emergence of Massive Open Online Course (MOOC) which has large scale, online and open features can make up for the shortage of traditional professional degree postgraduate education mode by introducing MOOC teaching mode. However, it is still a fangle to integrate MOOC into the traditional postgraduate education for professional degree and there are no standard methods for reference in the construction of MOOC courses as well as the corresponding evaluations. In this paper, the construction method and practical experience of MOOC courses for professional degree postgraduate education are discussed in details, based on the MOOC course of Introduction to Engineering Optics. Firstly, the principle of MOOC course contents for professional degree postgraduate education is introduced from the aspects of students' demand, MOOC features and practical applications. Secondly, the optimization of MOOC teaching mode is discussed in order to improve the teaching quality and learning efficiency. Thirdly, in order to overcome the deficiency of current MOOC examination schemes, a novel MOOC evaluation scheme is proposed which is capable of assessing students' learning attitude as well as their ability and performance differences. Finally, a practical summary is given about how to integrate the MOOC teaching mode into the postgraduate education for professional degree, including the constructions of teaching team, course system as well as other factors. From the paper, we can conclude that the integration of MOOC teaching mode into the postgraduate education for professional degree will improve the teaching quality and efficiency.

Oak Ridge TNS Program 1976--1977. Integration of engineering reality brings us closer to realizable reactor

International Nuclear Information System (INIS)

Roberts, M.

1977-01-01

Both the techniques and results of bringing engineering reality into the exploration of the possible design choices for The Next Step (TNS) in the Tokamak Fusion Program after TFTR are discussed in this report. Each of the elements of our interrelated, three-part approach--plasma engineering, engineering design, and program planning--is highlighted. The constraints developed from an engineering viewpoint are seen to stimulate creative improvements in each area. Plasma engineering activities that reduce technological requirements for reactor core performance are described. The engineering design study comparing quantitatively various technical options for TF coils is outlined with summarized findings leading to a clearer view of the essential problems--namely the setting of objectives and making of decisions. The findings of the draft program planning exercise are also presented

Users manual for Aerospace Nuclear Safety Program six-degree-of-freedom reentry simulation (TMAGRA6C)

International Nuclear Information System (INIS)

Sharbaugh, R.C.

1990-02-01

This report documents the updated six-degree-of-freedom reentry simulation TMAGRA6C used in the Aerospace Nuclear Safety Program, ANSP. The simulation provides for the inclusion of the effects of ablation on the aerodynamic stability and drag of reentry bodies, specifically the General Purpose Heat Source, GPHS. The existing six-degree-of-freedom reentry body simulations (TMAGRA6A and TMAGRA6B) used in the JHU/APL Nuclear Safety Program do not include aerodynamic effects resulting from geometric changes to the configuration due to ablation from reentry flights. A wind tunnel test was conducted in 1989 to obtain the effects of ablation on the hypersonic aerodynamics of the GPHS module. The analyzed data were used to form data sets which are included herein in tabular form. These are used as incremental aerodynamic inputs in the new TMAGRA6C six-degree-of-freedom reentry simulation. 20 refs., 13 figs., 2 tabs

Research report 1987-1989: Environmental Quality Laboratory and Environmental Engineering Science, W. M. Keck Laboratories

OpenAIRE

Brooks, Norman H.

1990-01-01

This research biennial report for 1987-89 covers the activities of both the Environmental Engineering Science program and the Environmental Quality Laboratory for the period October 1987-November 1989. Environmental Engineering Science is the degree-granting academic program housed in the Keck Laboratories, with associated research projects. The Environmental Quality Laboratory is a research center focusing on large scale problems of environmental quality and natural resources. All the facult...

Results of Summer Enrichment Program to Promote High School Students' Interest in Engineering

Science.gov (United States)

Hart, Brenda; McAnulty, Kate

2014-01-01

For more than thirty years, personnel from the University of Louisville J.B. Speed School of Engineering have presented a summer program targeting high school students historically underrepresented in engineering fields. INSPIRE provides these students with an introduction to careers in engineering and assists the students in planning their…

Pediatric medical device development by surgeons via capstone engineering design programs.

Science.gov (United States)

Sack, Bryan S; Elizondo, Rodolfo A; Huang, Gene O; Janzen, Nicolette; Espinoza, Jimmy; Sanz-Cortes, Magdalena; Dietrich, Jennifer E; Hakim, Julie; Richardson, Eric S; Oden, Maria; Hanks, John; Haridas, Balakrishna; Hury, James F; Koh, Chester J

2018-03-01

There is a need for pediatric medical devices that accommodate the unique physiology and anatomy of pediatric patients that is increasingly receiving more attention. However, there is limited literature on the programs within children's hospitals and academia that can support pediatric device development. We describe our experience with pediatric device design utilizing collaborations between a children's hospital and two engineering schools. Utilizing the academic year as a timeline, unmet pediatric device needs were identified by surgical faculty and matched with an engineering mentor and a team of students within the Capstone Engineering Design programs at two universities. The final prototypes were showcased at the end of the academic year and if appropriate, provisional patent applications were filed. All twelve teams successfully developed device prototypes, and five teams obtained provisional patents. The prototypes that obtained provisional patents included a non-operative ureteral stent removal system, an evacuation device for small kidney stone fragments, a mechanical leech, an anchoring system of the chorio-amniotic membranes during fetal surgery, and a fetal oxygenation monitor during fetoscopic procedures. Capstone Engineering Design programs in partnership with surgical faculty at children's hospitals can play an effective role in the prototype development of novel pediatric medical devices. N/A - No clinical subjects or human testing was performed. Copyright © 2017 Elsevier Inc. All rights reserved.

Experiences and emotions of faculty teaching in accelerated second baccalaureate degree nursing programs.

Science.gov (United States)

Brandt, Cheryl L; Boellaard, Melissa R; Zorn, Cecelia R

2013-07-01

The number of accelerated second baccalaureate degree nursing (ASBSN) programs has mushroomed over recent decades, with more than 225 currently in existence. Scholars have described students and programs, but research examining the faculty experience is limited. The purpose of this study was to describe the experiences and emotions of faculty teaching students in ASBSN programs. Using a descriptive qualitative survey design, faculty (N = 138) from 25 randomly selected programs in 11 midwestern states were surveyed using an instrument developed for this study and distributed online. Ten themes emerged, including (a) Engaging With Motivated, Mature, and Diverse Students, (b) Students Choosing Nursing for the "Wrong Reasons," (c) Too Much Work, Too Little Time for Students and Faculty, (d) Amazement, (e) Pride, and (f) Frustration. These findings will help novice and seasoned ASBSN faculty interpret their experiences, strengthen precepting and mentoring activities, and support administrators in determining staffing plans and designing ASBSN programs. Copyright 2013, SLACK Incorporated.

The impact of program experiences on the retention of women engineering students in Mexico

Science.gov (United States)

Villa, Maria Del Carmen Garcia

This qualitative study sought to describe and understand the experiences of female students attending engineering colleges in Mexico and the sources of support and strategies that helped them persist in their programs. The participants were 20 women engineering students enrolled in at least their third year in selected colleges of engineering in Mexico, in both public and private universities, and pursuing a variety of engineering majors. Findings focus on the experiences of female students that helped them stay in their programs. Participants described their experiences in college as very challenging and perceived the environment as hostile and uncertain. In addition, patriarchal Mexican cultural values and stereotypes were identified by students as influencing and helping shape the engineering environment. However, in this context, participants were able to find sources of support and use strategies that helped them remain in their majors, such as a strong desire to succeed, a perceived academic self-ability; and support from their families, peers, institutions, and---most importantly---their professors. Furthermore, the fact that participants were able to persist in their programs gave them a sense of pride and satisfaction that was shared by their families, peers, and faculty. In addition, participants experienced contradictory forces and were constantly negotiating between rejecting traditional gender norms and upholding the norms that are so deeply engrained in Mexican society. Finally, as the students advanced in their programs and became "accepted to the club," they tended to reproduce the male-dominated value system present in engineering colleges accepting their professors' expectations of being "top students," accepting the elitist culture of engineering superiority, and embracing the protection given by their male peers. Retention of Mexican female engineering students is important for all engineering colleges, but cultural factors must be taken into

Impetus and Creation of an Accelerated Second-Degree Baccalaureate Nursing Program Readmission Policy

Directory of Open Access Journals (Sweden)

Joanne Schwartz PhD, PMHNP-BC, CNE

2017-04-01

Full Text Available An accelerated second-degree baccalaureate nursing (ASDBN is an academic plan of study typically 12 to 24 months in duration. ASDBN students make many changes when entering this type of program. Some of the major changes ASDBN students make when entering an ASDBN program include leaving jobs, incurring debt, draining financial resources, forgoing time with children, spouses, and significant others, and, in some cases, relocating far from family and support systems. Because of the nature and scope of the many sacrifices ASDBN students typically make, academic program dismissal is particularly traumatic and devastating. It is not uncommon for an ASDBN student to seek program readmission when they are dismissed for academic reasons. Many academically dismissed ASDBN students seek program readmission. Administrators face a challenging decision in program readmission requests. The key issue with program readmission of ASDBN students is having a rigorous and comprehensive policy to determine which ASDBN students should be readmitted. This article examines one large, private, urban university’s ASDBN program’s readmission policy design and how the policy is applied to manage and determine ASDBN program readmission requests.

Lessons Learned: Creating an Online Business Degree from a Successful On-Campus Business Degree

Science.gov (United States)

Cordeiro, William P.; Muraoka, Dennis

2015-01-01

The horse has left the barn. Distance education is here to stay and the number of degree programs offered online is growing rapidly. California State University Channel Islands (CI) admitted its first students in 2002, and the undergraduate and graduate degrees in business were among its first program offerings. From its inception, the…

The Development of a Program of Study for a Bachelor's Degree in Early Childhood Education in Belize

Science.gov (United States)

Mendez Valladares, Melissa Dilieth

2017-01-01

Presently, the highest degree a person interested in teaching at the early childhood level in Belize is the Associate's Degree in Early Childhood Education. The purpose of this project was to design a program of undergraduate coursework in the area of teacher preparation that will meet university qualifications for a Bachelor's Degree in Early…

The Curriculum Planning Process for Undergraduate Game Degree Programs in the United Kingdom and United States

Science.gov (United States)

McGill, Monica M.

2012-01-01

Digital games are marketed, mass-produced, and consumed by an increasing number of people and the game industry is only expected to grow. In response, postsecondary institutions in the UK and the U.S. have started to create game degree programs. Though curriculum theorists provide insight into the process of creating a new program, no formal…

Weapon System Requirements: Detailed Systems Engineering Prior to Product Development Positions Programs for Success

Science.gov (United States)

2016-11-01

modified, replaced, or sustained by consumers or different manufacturers in addition to the manufacturer that developed the system. It also allows...WEAPON SYSTEM REQUIREMENTS Detailed Systems Engineering Prior to Product Development Positions Programs for Success...Engineering Prior to Product Development Positions Programs for Success Why GAO Did This Study Cost and schedule growth in DOD major defense

Construction of Engineering Education Program based on the Alumni's Evaluation of the Educational Outcome

Science.gov (United States)

Tsukamoto, Takehiko; Nishizawa, Hitoshi

The Department of Electrical and Electronic Engineering in Toyota National College of Technology has put great emphasis on fundamental subjects, such as “electrical and electronic circuit" and “electromagnetism" more than 40 years. On the other hand, several issues of our college were clarified by the alumni's evaluation of the educational outcome in 2002. The most serious issue was low achievement of English and Social education. The alumni of all generation are dissatisfied with their low skill in English communication. As a part of the educational reforms, our department has constructed a new engineering education program focusing on fundamental ability. We introduced many problem-based-learning experiments and the compulsory subjects such as “English communication for electrical engineers" and “Engineering Ethics" into this program. Great educative results are obtained by these improvements. As a typical example, the scores of all 2nd grade students of advanced engineering course in TOEIC tests became 450 points or more. Our program has been authorized by JABEE since 2004.

Development of engineering program for integrity evaluation of pipes with local wall thinned defects

International Nuclear Information System (INIS)

Park, Chi Yong; Lee, Sung Ho; Kim, Tae Ryong; Park, Sang Kyu

2008-01-01

Integrity evaluation of pipes with local wall thinning by erosion and corrosion is increasingly important in maintenance of wall thinned carbon steel pipes in nuclear power plants. Though a few program for integrity assessment of wall thinned pipes have been developed in domestic nuclear field, however those are limited to straight pipes and methodology proposed in ASME Sec.XI Code Case N-597. Recently, the engineering program for integrity evaluation of pipes with all kinds of local wall defects such as straight, elbow, reducer and branch pipes was developed successfully. The program was designated as PiTEP (Pipe Thinning Evaluation Program), which name was registered as a trademark in the Korea Intellectual Property Office. A developed program is carried out by sequential step of four integrity evaluation methodologies, which are composed of construction code, code case N-597, its engineering method and two developed owner evaluation method. As PiTEP program will be performed through GUI (Graphic User Interface) with user's familiarity, it would be conveniently used by plant engineers with only measured thickness data, basic operation conditions and pipe data

Evolutionary programming as a platform for in silico metabolic engineering

DEFF Research Database (Denmark)

Patil, Kiran Raosaheb; Rocha, Isabel; Förster, Jochen

2005-01-01

, and it is therefore interesting to develop new faster algorithms. Results In this study we report an evolutionary programming based method to rapidly identify gene deletion strategies for optimization of a desired phenotypic objective function. We illustrate the proposed method for two important design parameters...... of close to optimal solutions. The identified metabolic engineering strategies suggest that non-intuitive genetic modifications span several different pathways and may be necessary for solving challenging metabolic engineering problems....

Motivational Orientations of Non-Traditional Adult Students to Enroll in a Degree-Seeking Program

Science.gov (United States)