WorldWideScience

Sample records for engineering centre institute

  1. Institutional profile: the London Centre for Nanotechnology.

    Science.gov (United States)

    Weston, David; Bontoux, Thierry

    2009-12-01

    Located in the London neighborhoods of Bloomsbury and South Kensington, the London Centre for Nanotechnology is a UK-based multidisciplinary research center that operates at the forefront of science and technology. It is a joint venture between two of the world's leading institutions, UCL and Imperial College London, uniting their strong capabilities in the disciplines that underpin nanotechnology: engineering, the physical sciences and biomedicine. The London Centre for Nanotechnology has a unique operating model that accesses and focuses the combined skills of the Departments of Chemistry, Physics, Materials, Medicine, Electrical and Electronic Engineering, Mechanical Engineering, Chemical Engineering, Biochemical Engineering and Earth Sciences across the two universities. It aims to provide the nanoscience and nanotechnology required to solve major problems in healthcare, information processing, energy and the environment.

  2. Annual Report 1991. Institute for systems engineering and informatics

    International Nuclear Information System (INIS)

    1992-01-01

    The report presents the achievements of the Institute for Systems Engineering and Informatics (ISEI) of the Joint Research Centre (JRC) of the Commission of the European Communities (CEC) for 1991. The JRC is a European scientific and technical research centre established by the member states of the CEC. Its four sites in Belgium (Geel), Germany (Karlsruhe), the Netherland (Petten) and Italy (Ispra) house 8 institutes, each with its own focus of expertise. ISEI, based at Ispra, was created in 1990 by the merger of the Institute for Systems Engineering (ISE) and the Centre for Information Technologies and Electronics (CITE). The main areas of activity of the Institute are: - Industrial and Environmental Risk, - Nuclear Safeguards, -Fusion Reactor Systems Integration and Safety, - Solar Energy Systems and Energy Management, - Advanced Computing, - Informatic services

  3. Engineering Institute

    Science.gov (United States)

    Projects Past Projects Publications NSEC » Engineering Institute Engineering Institute Multidisciplinary engineering research that integrates advanced modeling and simulations, novel sensing systems and new home of Engineering Institute Contact Institute Director Charles Farrar (505) 665-0860 Email UCSD EI

  4. Main research activities at the Institute of Energy Process Engineering Research Centre Juelich Germany

    International Nuclear Information System (INIS)

    Achenbach, E.

    1995-06-01

    This report summarizes four lectures been held during the author's seven-week stay at the Department of High Temperature Engineering in the period from February 2nd to March 23rd in 1995 under the JAERI foreign researcher inviting program. Though the Institute of Energy Process Engineering(IEV) in the Research Centre Juelich(KFA), has recently changed the subject of research from nuclear technology of high-temperature gas-cooled reactors(HTGRs) to fuel cell technology, there are many common items of research. In particular, the following topics presented in the lectures are of mutual interest: 1)Methane-steam reforming used at JAERI as HTGR heat utilization system and applied at KFA to internal reforming in the high temperature Solid Oxide Fuel Cell(SOFC), 2)Technology and modeling of high temperature electrolysis at JAERI as the inverse process of the SOFC developed at KFA, 3)Flow simulation of branched systems treated at JAERI for the development of high temperature heat exchangers and performed at KFA with respect to the SOFC manifold system, 4)Fundamental aspects of heat and mass transfer. The report should help to create a basis of discussing the above mentioned problems and to stimulate the research work at JAERI. (author)

  5. TTI Phase 2 Institutional Support: Economic Policy Research Centre ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    TTI Phase 2 Institutional Support: Economic Policy Research Centre ... the Economic Policy Research Centre's (EPRC) role as a credible public policy institution in ... IWRA/IDRC webinar on climate change and adaptive water management.

  6. Institutional Support: Centre for Economic and Social Research ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Institutional Support: Centre for Economic and Social Research, Education and Documentation (Burkina Faso). The Centre d'études de documentation et de ... innovations to improve lives and livelihoods. Five world-class research teams are working to develop vaccines for neglected livestock diseases in the Global South.

  7. Strategies for the Cooperation of Educational Institutions and Companies in Mechanical Engineering

    Science.gov (United States)

    Kettunen, Juha

    2006-01-01

    Purpose: The purpose of this study is to analyse the strategic planning of the Centre for Mechanical Engineering, which is a joint venture of educational institutions and companies in Southwest Finland. Design/methodology/approach: The paper presents the strategies of focus and cost efficiency and how the selected strategies can be adjusted…

  8. Limitation of Piston Centre Shift in Free Piston Stirling Engines

    Energy Technology Data Exchange (ETDEWEB)

    Van der Woude, R.R. [ECN Energy in the Built Environment and Networks, Petten (Netherlands)

    2006-09-15

    Piston centre shift is one of the phenomena setting Free Piston engines apart from traditional kinematic engines. In kinematic engines the piston centre position is determined by the design of the engine's internal mechanisms. In Free Piston engines however, the piston's mid-stroke position is determined by the balance of forces acting on the piston, in particular flexure and gas pressure forces. As a result, a mean pressure difference across the piston emerging during engine operation will cause the piston mid-stroke position to shift away from the geometrical centre. This process will continue until a new balance is reached with the flexure forces counteracting the new mean pressure balance. Yet, before the new equilibrium is reached, the resulting piston centre shift may have grown to such an extent that piston overstrokes have become inevitable. In order to limit piston centre shift and prevent piston overstrokes, several solutions have been proposed in the past. Popular solutions include ingenious mechanisms to vent gas between the spaces separated by the piston, in an attempt to limit the pressure difference. Enatec however has adopted a different approach by applying a precisely determined clearance between the piston and cylinder. With the right shape the clearance effectively limits the mean pressure difference across the piston and therefore limits the extent of the piston centre drift. Taking benefit of tightly controlled tolerances of both piston and cylinder, Enatec has demonstrated the effectiveness of this simple concept in series produced engines.

  9. Centre for nuclear engineering University of Toronto annual report 1984

    International Nuclear Information System (INIS)

    1984-12-01

    The annual report of the Centre for Nuclear Engineering, University of Toronto covers the following subjects: message from the Dean; Chairman's message; origins of the centre; formation of the centre; new nuclear appointments; and activities of the centre, 1984

  10. National Nuclear Research Institute Annual Report 2013

    International Nuclear Information System (INIS)

    2014-01-01

    The report highlights the activities of the National Nuclear Research Institute (NNRI) of the Ghana Atomic Energy Commission for the year 2013, grouped under the following headings: Centres under the institute namely Nuclear Reactors Research Centre (NRRC); Accelerator Research Centre (ARC); Engineering Services Centre (ESC); National Radioactive Waste Management Centre (NRWMC); Nuclear Chemistry and Environmental Research Centre (NCERC); Nuclear Applications Centre (NAC) and National Data Centre (NDC). (A. B.)

  11. Establishing a `Centre for Engineering Experimentation and Design Simulation': a step towards restructuring engineering education in India

    Science.gov (United States)

    Venkateswarlu, P.

    2017-07-01

    Reforms in undergraduate engineering curriculum to produce engineers with entrepreneurial skills should address real-world problems relevant to industry and society with active industry support. Technology-assisted, hands-on projects involving experimentation, design simulation and prototyping will transform graduates into professionals with necessary skills to create and advance knowledge that meets global standards. To achieve this goal, this paper proposes establishing a central facility, 'Centre for Engineering Experimentation and Design Simulation' (CEEDS) in autonomous engineering colleges in India. The centre will be equipped with the most recent technology resources and computational facilities where students execute novel interdisciplinary product-oriented projects benefiting both industry and society. Students undertake two projects: a short-term project aimed at an engineering solution to a problem in energy, health and environment and the other a major industry-supported project devoted to a product that enhances innovation and creativity. The paper presents the current status, the theoretical and pedagogical foundation for the centre's relevance, an activity plan and its implementation in the centre for product-based learning with illustrative examples.

  12. Critical needs for piston engine overhaul centre in Malaysia

    Science.gov (United States)

    Khairuddin, M. H.; Yahya, M. Y.; Johari, M. K.

    2017-12-01

    Piston engine overhaul centre (PEOC) is the branch of aviation Maintenance, Repair and Overhaul (MRO) providers, which plays a pivotal role in maintaining the fleet of business and commercial aircraft in the world. The centre typically offers three main MRO capabilities: airframe, engine and component services. Companies holding a PEOC(s) are all subjected to stringent procedures and conditions regulated and audited by the International Civil Aviation Organization. Currently, piston engine maintenance and repair for Asian countries is conducted only in Singapore. The focus of this study is to establish the needs for a PEOC in Malaysia, which will cater almost all small local aircraft companies such as transport and flying school companies.

  13. NNC's engineering development centre at Risley

    International Nuclear Information System (INIS)

    Garnsey, R.

    1994-01-01

    NNC's Engineering Development Centre (EDC) provides specialist engineering, manufacturing and development support to customers. EDC is located at Risley, near Warrington, but its operation are closely integrated into the Company's overall business activities based at its headquarters in Knutsford, Cheshire, fifteen miles away. EDC's facilities and expertise were originally developed to support the UK's nuclear power station construction programme. However, EDC professionals have since applied their specialist expertise to the benefit of new customers in line with the Company's diversification and a large and growing proportion of work is now in support of the defence and process industries. (author)

  14. Homi Bhabha Centre for Science Education, Tata Institute of ...

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 22; Issue 2. Homi Bhabha Centre for Science Education, Tata Institute of Fundamental Research (A Deemed University). Information and Announcements Volume 22 Issue 2 February 2017 pp 189-189 ...

  15. Educational Research Centre of the Joint Institute for Nuclear Research and students training on the 'Medical Physics' speciality

    International Nuclear Information System (INIS)

    Ivanova, S.P.; )

    2005-01-01

    The Educational Research Centre (ERC) of the Joint Institute for Nuclear Research is the place of joint activity of the JINR, Moscow State University (MSU) and Moscow Engineering Physical Institute (MEFI) on students training by a broadened circle of specialities with introduction of new educational forms. Active application of medical accelerator beams of the JINR Laboratory of Nuclear Beams becomes a reason for implementation of a new training chair in the MEFI on the JINR base - the Physical methods in applied studies in the medicine chair. For the 'medical physics' trend development in 2003 the workshop on discussion both curricula and teaching methodic by the speciality was held. One the Educational Research Centre main activities is both organization and conducting an international scientific schools and training courses. The International student School 'Nuclear-Physical Methods and Accelerators is the most popular and traditional. The principal aim of these schools and courses is familiarization of students and postgraduates with last achievement and and contemporary problems of applied medical physics. The school audience is a students and postgraduates of ERC, MSU, MEFI, and an institutes of Poland, Hungary, Slovakia, France, Czech and Bulgaria

  16. TTI Phase 2 Institutional Support: Centre for Poverty Analysis | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This funding will strengthen the Centre for Poverty Analysis' (CEPA) role as a credible public ... policy research institutions, or think tanks, in developing countries. ... For CEPA, this project will help enhance its research quality, organizational ...

  17. Nano-engineered pinning centres in YBCO superconducting films

    Energy Technology Data Exchange (ETDEWEB)

    Crisan, A., E-mail: adrian.crisan@infim.ro [National Institute for Materials Physics Bucharest, 105 bis Atomistilor Str., 077125 Magurele (Romania); School of Metallurgy and Materials, University of Birmingham, Edgbaston, B15 2TT Birmingham (United Kingdom); Dang, V.S. [School of Metallurgy and Materials, University of Birmingham, Edgbaston, B15 2TT Birmingham (United Kingdom); Nano and Energy Center, VNU Hanoi University of Science, 334 Nguyen Trai, Thanh Xuan, Hanoi (Viet Nam); Mikheenko, P. [School of Metallurgy and Materials, University of Birmingham, Edgbaston, B15 2TT Birmingham (United Kingdom); Department of Physics, University of Oslo, P.O. Box 1048 Blindern, N-0316 Oslo (Norway)

    2017-02-15

    Highlights: • Power applications of YBCO films/coated conductors in technological relevant magnetic fields requires nano-engineered pinning centre. • Three approaches have been proposed: substrate decoration, quasi-multilayers, and targets with secondary phase nano-inclusions. • Combination of all three approaches greatly increased critical current in YBCO films. • Bulk pinning force, pinning potential, and critical current density are estimated and discussed in relation with the type and strength of pinning centres related to the defects evidenced by Transmission Electron Microscopy. - Abstract: For practical applications of superconducting materials in applied magnetic fields, artificial pinning centres in addition to natural ones are required to oppose the Lorentz force. These pinning centres are actually various types of defects in the superconductor matrix. The pinning centres can be categorised on their dimension (volume, surface or point) and on their character (normal cores or Δκ cores). Different samples have been produced by Pulsed Laser Deposition, with various thicknesses, temperatures and nanostructured additions to the superconducting matrix. They have been characterized by SQUID Magnetic Properties Measurement System and Physical Properties Measurement System, as well as by Transmission Electron Microscopy (TEM). Correlations between pinning architecture, TEM images, and critical currents at various fields and field orientations will be shown for a large number of YBa{sub 2}Cu{sub 3}O{sub x} films with various types and architectures of artificial pinning centres.

  18. Science Information Centre and Nuclear Library of 'Jozef Stefan' Institute, Ljubljana, Slovenia

    International Nuclear Information System (INIS)

    Stante, A.; Smuc, S.

    2006-01-01

    The 'Jozef Stefan' Institute Science Information Centre is the central Slovene physics library and one of the largest special libraries in Slovenia. Our collection covers the fields of physics, chemistry, biochemistry, electronics, information science, artificial intelligence, energy management, environmental science, material science, robotics etc. The Nuclear Library at the Reactor Centre Podgorica is a part of the Science Information Centre. It collects and keeps literature from the field of reactor and nuclear energy and provides information to scientists employed at the Reactor Centre and users from the Nuclear Power Plant Krsko as well as other experts dealing with nuclear science and similar fields. The orders subscribed are sent by the Science Information Centre to other libraries included in inter-library lending in Slovenia and abroad. (author)

  19. The role of the University of Calgary in the development of a centre of excellence in petroleum technology

    International Nuclear Information System (INIS)

    Moore, G.; Chakma, A.

    1996-01-01

    The role of the University of Calgary's Department of Chemical and Petroleum Engineering in developing a world centre of excellence in petroleum engineering in Calgary, was discussed. Reasons for the failure of previous efforts to establish a Department of Petroleum Engineering at the University were explained. High participation levels in the existing Department of Chemical and Petroleum Reservoir Engineering's water-flooding, and reservoir engineering programs were noted. Support for the development of a centre of excellence in petroleum engineering from government and industry, with specific reference to the the recently instituted, government sponsored, ACCESS program, was described. Problems in maintaining a University Faculty with a wide range of petroleum expertise were noted. Current plans for the development of a Conjoint Centre of Applied Petroleum Technology in conjunction with the Southern Alberta Institute of Technology were described. The joint effort between the two institutions appeared to be the most promising avenue to date to realize the dream of Calgary as a world center of excellence in petroleum engineering, preparing future workers in the petroleum industry at all levels, from technologists to post-doctoral fellows

  20. Human-centred radiological software techniques supporting improved nuclear safety

    International Nuclear Information System (INIS)

    Szoeke, Istvan; Johnsen, Terje

    2013-01-01

    The Institute for Energy Technology (IFE) is an international research foundation for energy and nuclear technology. IFE is also the host for the international OECD Halden Reactor Project. The Software Engineering Department in the Man Technology Organisation at IFE is a leading international centre of competence for the development and evaluation of human-centred technologies, process visualisation, and the lifecycle of high integrity software important to safety. This paper is an attempt to give a general overview of the current, and some of the foreseen, research and development of human-centred radiological software technologies at the Software Engineering department to meet with the need of improved radiological safety for not only nuclear industry but also other industries around the world. (author)

  1. Institute of Industrial Engineers Asian Conference 2013

    CERN Document Server

    Tsao, Yu-Chung; Lin, Shi-Woei

    2013-01-01

    This book is based on the research papers presented during The Institute of Industrial Engineers Asian Conference 2013 held at Taipei in July 2013. It presents information on the most recent and relevant research, theories and practices in industrial and systems engineering. Key topics include: Engineering and Technology Management Engineering Economy and Cost Analysis Engineering Education and Training Facilities Planning and Management Global Manufacturing and Management Human Factors Industrial & Systems Engineering Education Information Processing and Engineering Intelligent Systems Manufacturing Systems Operations Research Production Planning and Control Project Management Quality Control and Management Reliability and Maintenance Engineering Safety, Security and Risk Management Supply Chain Management Systems Modeling and Simulation Large scale complex systems.

  2. Institute of Nuclear Engineering: report 1974-1976

    International Nuclear Information System (INIS)

    Amyot, L.

    1976-01-01

    The Institute of Nuclear Engineering is described in terms of its objectives, resources, instructional duties, and research. Basically the Institute is involved in the study of technical, economic and ecological aspects of nuclear installations, basic radioisotopic methods, and general energy problems. (E.C.B.)

  3. Networking of institutions in India to promote research and education in nuclear science and engineering

    International Nuclear Information System (INIS)

    Puri, R.R.

    2007-01-01

    Full text: The Programme of Nuclear Energy and its Applications (NEA) is knowledge intensive requiring engineers and scientists having special education and training for its implementation. The paucity of manpower in managing this programme is partly due to limitations of the university system in catering to the needs of the nuclear industry. Those limitations arise due to several reasons, like, regulatory requirements which make it difficult to set up nuclear facilities in university environment, capital intensive nature of nuclear set-ups, paucity of teaching staff having hands-on experience and limited employment opportunities making nuclear option unattractive for talented youngsters. The Department of Atomic Energy of India (DAE) established in 1954 for shaping and managing the Indian NEA programme realized those limitations and opted for an in-house education and training programme leading to assured employment for young Engineering Graduates and Science Post Graduates. Called the Bhabha Atomic Research Centre (BARC) Training School Programme, it is in place since 1957. The Indian NEA programme is thus fortunate to be supported by a visionary human resource development (HRD) programme in nuclear science and technology practically right since its inception. The success of HRD programme of DAE lies in its broader outlook based on the premise that technology development and basic research go hand-in-hand. This outlook is reflected also in the way DAE has been managing the implementation of its programme in that on one hand it has set up centres for technological Research and Development and, on the other, it is providing Grant-in-Aid to several Institutes for carrying basic research. Moreover, DAE has not lost sight of the fact that success of its initiatives lies as much in the vibrant university system as in its own training and educational efforts. It has, therefore, created avenues for extra-mural funding for supporting research activities in universities in

  4. The nuclear research centre at Bariloche, Argentina

    International Nuclear Information System (INIS)

    Abriata, J.P.

    2001-01-01

    The nuclear research centre at Bariloche (CAB) is one of the four centres under the Atomic Energy Commission of Argentina (CNEA). The research programme of CAB addresses various issues like nuclear reactor development, nuclear fuel and fuel cycle, applications of radioisotopes and radiation, and waste management. There is also a basic nuclear science component. The human resource development in the areas of physics and nuclear engineering is done in an associated Balseiro Institute which has undergraduate and graduate programmes as well as doctoral and postdoctoral research. The Centre interacts well with the society and provides services in the nuclear area. It has a close interaction with the nuclear sector of Argentina as also with many international organisations. Regulatory control over the Centre is carried out by the Nuclear Regulatory Authority of Argentina. (author)

  5. Engineering: 30 years forward - the industry, the future, the engineers, the institution

    Energy Technology Data Exchange (ETDEWEB)

    Walker, S C.A.; Buck, J D

    1989-07-01

    The authors have considered their expectations and the future of the mining industry, aspects of equipment and the future of the Institution. The future for the industry and recognition of the vital role of engineering managers within the industry is viewed with optimism. Today's young engineers are well qualified and have the breadth of experience to meet the changes of the future with confidence and will achieve success. The environment will continue to change, engineers need to adapt to new requirements and ensure professional and technical training continues throughout their careers. Equipment and the relationships between operators and equipment suppliers will need to evolve positively, flexibility in supply and contractual agreements, linked to competitive prices will allow the industry to survive and prosper. The Institution must change to remain in existence and develop its influence, many options are available, corporate plans, business objectives and financial targets must be discussed at all levels in the Institution allowing informed decisions to be taken by the majority of the members and their representatives.

  6. Indigenizing Student-Centred Learning: A Western Approach in an Indigenous Educational Institution

    Science.gov (United States)

    Kennedy, Chona Pineda

    2013-01-01

    This study investigated the alignment of the teaching and learning practices with a student-centred learning approach in an indigenous educational institution. The findings indicated that when a western concept is applied in the classroom, it is vital for it to be culturally relevant and appropriate to the cultural beliefs and values of the…

  7. Summer Institute in Biomedical Engineering for College Teachers

    Science.gov (United States)

    Cleaver, T. G.; And Others

    1973-01-01

    Discusses the objectives, curricula, and accomplishments of an interdisciplinary summer institute designed to prepare college teachers qualified in both the life sciences and engineering. Indicates that joint educational programs between engineering, science, and medical faculties are completely feasible if each group is interested in the other…

  8. A model for facilitating translational research and development in China: Call for establishing a Hong Kong Branch of the Chinese National Engineering Research Centre for Biomaterials

    Directory of Open Access Journals (Sweden)

    Liming Bian

    2014-10-01

    Full Text Available With significant improvements in living standards in China and the aging population that accompanies these improvements, the market demand for high-quality orthopaedic biomaterials for clinical applications is tremendous and growing rapidly. There are major efforts to promote cooperation between different scientific institutes with complementary strengths for the further development of the biomaterial industry in China to achieve the technological level of developed countries. An excellent example is that the Ministry of Science and Technology of the People's Republic of China (MOST; Beijing, China established the Chinese National Engineering Research Centres (CNERCs, which serve as a major initiative in driving basic and applied technological research and development (R&D in mainland China. To create a win-win situation with Hong Kong, the MOST and the Hong Kong Innovation and Technology Commission are jointly establishing the Hong Kong Branch of the CNERCs. Through an amicable arrangement, the Chinese University of Hong Kong (CUHK; Shatin, Hong Kong and the Chinese National Engineering Research Centre for Biomaterials (i.e., Main Centre in Chengdu, People's Republic of China have decided to apply to establish the Hong Kong Branch of the CNERC for Biomaterials at the CUHK. The effort in establishing the Hong Kong Branch of Biomaterials seeks to promote further collaboration with the Main Centre with the goals of promoting synergy and a win-win cooperation between mainland China and Hong Kong in scientific research, talent cultivation, clinically driven novel biomaterials product design, and preclinical and clinical testing. It will thus become a model for the successful collaboration between the Hong Kong research institutions and the mainland CNERCs in the area of biomaterials. Such initiatives will facilitate close collaboration in translational medicine associated with biomaterial development and application.

  9. France. The Centre de la Manche disposal facility: Entering into the institutional control period

    International Nuclear Information System (INIS)

    2001-01-01

    The Centre de la Manche disposal facility, created by decree in 1969, is the first French near-surface radioactive waste disposal facility. It lies at the northwest end of the Cotentin peninsula, next to the COGEMA-La Hague fuel reprocessing plant. The Centre de la Manche facility occupies an area of about 150,000 m 2 . Its operation was terminated in late June 1994 with about 500,000 m 3 of packages disposed of. Operating feedback from the Centre de la Manche was used to design the second French disposal facility, located in the Aube, which has been receiving LILW since 1992. Since the end of the operating period, ANDRA has been preparing the statutory files to prepare the Centre de la Manche for its entry into the institutional control period. A new government decree will set the framework in which the Centre will evolve in this period. The regulatory process includes the filing of an application with the ministries concerned, containing a file with the requisite statutory documents, including an impact study of the facility on its environment as well as a hazard study. The file will then be submitted to a public inquiry, an essential informative period of the project designed to make a compilation of criticisms and suggestions from the public. In support of the application, a safety report has been sent to the Nuclear Installation Safety Directorate (DSIN) for a decision on the admissibility of the application. Recently, the Group of experts appointed by the DSIN which examined it has come out in favor of the creation of a new basic nuclear installation (i.e., a new government agency) for the institutional control period. A draft decree will then be submitted to the approval of the Interministerial Commission for Basic Nuclear Installations. This process, initiated in 1994, is nearing completion

  10. Final Report: Performance Engineering Research Institute

    Energy Technology Data Exchange (ETDEWEB)

    Mellor-Crummey, John [Rice Univ., Houston, TX (United States)

    2014-10-27

    This document is a final report about the work performed for cooperative agreement DE-FC02-06ER25764, the Rice University effort of Performance Engineering Research Institute (PERI). PERI was an Enabling Technologies Institute of the Scientific Discovery through Advanced Computing (SciDAC-2) program supported by the Department of Energy's Office of Science Advanced Scientific Computing Research (ASCR) program. The PERI effort at Rice University focused on (1) research and development of tools for measurement and analysis of application program performance, and (2) engagement with SciDAC-2 application teams.

  11. Decommissioning of the research reactors at the Russian Research Centre Kurchatov Institute

    International Nuclear Information System (INIS)

    Ponomarev-Stepnoy, N.N.; Ryantsev, E.P.; Kolyadin, V.I.; Kucharkin, N.E.; Melkov, E.S.; Gorlinsky, Yu.E.; Kyznetsova, T.I.; Bulkin, B.K.

    2002-01-01

    The Kurchatov Institute is the largest research center of Russia in the field of nuclear science and engineering. It comprises more than 10 research institutes and scientific-technological complexes carrying out research work in the field of safe development of atomic engineering, controlled thermonuclear fusion, and plasma physics, nuclear physics and elementary particle physics, research reactors, radiation materials technology, solid state physics and superconductivity, molecular and chemical physics, and also perspective know-how's, information science and ecology. This report is basically devoted to the decommissioning of the research reactor installations, in particular to the reactor MR because of the volume and complexity of actions involved. (author)

  12. Report on the IAEA advisory group meeting on network of nuclear reaction data centres

    Energy Technology Data Exchange (ETDEWEB)

    Pronyaev, V G; Schwerer, O [International Atomic Energy Agency, Nuclear Data Section, Vienna (Austria)

    2000-08-01

    This report summarizes the IAEA Advisory Group Meeting (AGM) on Network of Nuclear Reaction Data Centres, hold at the Institute of Physics and Power Engineering, Obninsk, Russia, 15 to 19 May 2000. The meeting was attended by 28 participants from 13 co-operating data centres from seven Member States and two International Organizations. The report contains a meeting summary, the conclusions and actions, progress and status reports of the participating data centres and working papers considered at the meeting. (author)

  13. IEEE [Institute of Electrical and Electronics Engineers] standards and nuclear software quality engineering

    International Nuclear Information System (INIS)

    Daughtrey, T.

    1988-01-01

    Significant new nuclear-specific software standards have recently been adopted under the sponsorship of the American Nuclear Society and the American Society of Mechanical Engineers. The interest of the US Nuclear Regulatory Commission has also been expressed through their issuance of NUREG/CR-4640. These efforts all indicate a growing awareness of the need for thorough, referenceable expressions of the way to build in and evaluate quality in nuclear software. A broader professional perspective can be seen in the growing number of software engineering standards sponsored by the Institute of Electrical and Electronics Engineers (IEEE) Computer Society. This family of standards represents a systematic effort to capture professional consensus on quality practices throughout the software development life cycle. The only omission-the implementation phase-is treated by accepted American National Standards Institute or de facto standards for programming languages

  14. Institutional Support : Centre for Research and Technology ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    year-old science and technology research centre at Maseno University in western Kenya. The Centre focuses on science and technology research to influence both national policies and development practices at the community level. Currently ...

  15. The Imperial College Thermophysical Properties Data Centre

    Science.gov (United States)

    Angus, S.; Cole, W. A.; Craven, R.; de Reuck, K. M.; Trengove, R. D.; Wakeham, W. A.

    1986-07-01

    The IUPAC Thermodynamic Tables Project Centre in London has at its disposal considerable expertise on the production and utilization of high-accuracy equations of state which represent the thermodynamic properties of substances. For some years they have been content to propagate this information by the traditional method of book production, but the increasing use of the computer in industry for process design has shown that an additional method was needed. The setting up of the IUPAC Transport Properties Project Centre, also at Imperial College, whose products would also be in demand by industry, afforded the occasion for a new look at the problem. The solution has been to set up the Imperial College Thermophysical Properties Data Centre, which embraces the two IUPAC Project Centres, and for it to establish a link with the existing Physical Properties Data Service of the Institution of Chemical Engineers, thus providing for the dissemination of the available information without involving the Centres in problems such as those of marketing and advertising. This paper outlines the activities of the Centres and discusses the problems in bringing their products to the attention of industry in suitable form.

  16. Human factors engineering applied to Control Centre Design of a research nuclear reactor

    Energy Technology Data Exchange (ETDEWEB)

    Farias, Larissa P. de; Santos, Isaac J.A. Luquetti dos; Carvalho, Paulo V.R., E-mail: larissapfarias@ymail.com [Instituto de Engenharia Nuclear (DENN/SEESC/IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Lab, de Usabilidade e Confiabilidade Humana; Monteiro, Beany G. [Universidade Federal do Rio Janeiro (UFRJ), Rio Janeiro, RJ (Brazil). Departamento de Desenho Industrial

    2017-07-01

    The Human Factors Engineering (HFE) program is an essential aspect for the design of nuclear installations. The overall aim of the HFE program is the improvement of the operational reliability and safety of plant operation. The HFE program main purpose is to ensure that human factor practices are incorporated into the plant design, emphasizing man-machine interface issues and design improvement of the nuclear reactor Control Centre. The Control Centre of nuclear reactor is a combination of control rooms, control suites and local control stations, which are functionally connected and located on the reactor site. The objective of this paper is to present a design approach for the Control Centre of a nuclear reactor used to produce radioisotopes and for nuclear research, including human factor issues. The design approach is based on participatory design principles, using human factor standards, ergonomic guidelines, and the participation of a multidisciplinary team during all design phases. Using the information gathered, an initial sketch 3D of the Control Centre was developed. (author)

  17. Human factors engineering applied to Control Centre Design of a research nuclear reactor

    International Nuclear Information System (INIS)

    Farias, Larissa P. de; Santos, Isaac J.A. Luquetti dos; Carvalho, Paulo V.R.; Monteiro, Beany G.

    2017-01-01

    The Human Factors Engineering (HFE) program is an essential aspect for the design of nuclear installations. The overall aim of the HFE program is the improvement of the operational reliability and safety of plant operation. The HFE program main purpose is to ensure that human factor practices are incorporated into the plant design, emphasizing man-machine interface issues and design improvement of the nuclear reactor Control Centre. The Control Centre of nuclear reactor is a combination of control rooms, control suites and local control stations, which are functionally connected and located on the reactor site. The objective of this paper is to present a design approach for the Control Centre of a nuclear reactor used to produce radioisotopes and for nuclear research, including human factor issues. The design approach is based on participatory design principles, using human factor standards, ergonomic guidelines, and the participation of a multidisciplinary team during all design phases. Using the information gathered, an initial sketch 3D of the Control Centre was developed. (author)

  18. The history of Korean Institute Chemical Engineers for fifteen years

    International Nuclear Information System (INIS)

    2012-12-01

    This book reports the history of Korean Institute of Chemical Engineers with commemorative message, three congratulatory address and photos for fifty years. Nest, it consists of five chapters, which deals with development this institute by chronological classification. It reports the development history by activity such as education, research, publishing branch, international activity, data, woman, and executive office. It records challenge of chemical engineering, remembrance for past presidents and appendixes on history and a list of members.

  19. The history of Korean Institute Chemical Engineers for fifteen years

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-12-15

    This book reports the history of Korean Institute of Chemical Engineers with commemorative message, three congratulatory address and photos for fifty years. Nest, it consists of five chapters, which deals with development this institute by chronological classification. It reports the development history by activity such as education, research, publishing branch, international activity, data, woman, and executive office. It records challenge of chemical engineering, remembrance for past presidents and appendixes on history and a list of members.

  20. Nuclear technology centre. Preserving and developing competence and resources

    International Nuclear Information System (INIS)

    Tiren, I.

    1995-01-01

    The Royal Institute of Technology in Stockholm provides one third of Sweden's capacity for engineering studies and technical research at the post-high-school level. Altogether, the institute includes about 8000 students and 900 active postgraduate students and has a staff of nearly 2500. The research activities cover a broad spectrum of the natural sciences and technology, as well as architecture, industrial economics, urban planning, work science and environmental technology. In 1993, a Nuclear Technology Centre was established at the institute. The purpose of this Centre is to stimulate education and research in nuclear technology in order to contribute to the preservation and development of competence in the nuclear field. The formation of the Centre should be regarded as one of several recent initiatives aimed at maintaining a high level of safety and reliability in the operation of nuclear power plants at a time when there are political manoeuvres to phase out nuclear energy in Sweden. The paper summarizes the motives that led to the formation of the Centre, its goals and organization, and its initial activities and results. The paper may be of interest to similar organizations in other countries which are also faced with uncertainties regarding the future of existing nuclear power plants or of current programmes, and which consider that co-operation between the industry and universities is an important factor in ensuring the quality of technological development. (author). 4 refs

  1. The Institute of Automotive Engineering at the Technical University of Dresden; Das Institut fuer Verbrennungsmotoren und Kraftfahrzeuge (IVK) an der TU Dresden

    Energy Technology Data Exchange (ETDEWEB)

    Bergmann, M.

    1995-05-01

    The Institute of Automotive Engineering belongs to the oldest German Institutes of this kind at all. Founded in 1918, the Institute reviews a history of over 75 years. Students training at the Institute takes aim at a future emloyment in fields of research and development and design and computing. Both car manufactures and suppliers appreciate the practice-oriented education given at the Institute. Corresponding to the internal structure the Institute provides a training at following teaching and research fields: Internal Combustion Engines, Automotive Drive Engineering and Automotive Electrics/Electronics. For that the Institute is equipped with modern test bench facilities and CAD/CAE workstations. (orig.) [Deutsch] Das IVK blickt auf eine lange Tradition zurueck und zaehlt noch heute zu den fuehrenden Ausbildungs- und Forschungsstaetten fuer Kraftfahrzeug- und Motoreningenieure. Derzeit bestehen drei Professuren: Verbrennungsmotoren, Kraftfahrzeug- und Antriebstechnik sowie Kraftfahrzeug-Elektronik/-Elektrik. (orig.)

  2. All India Seminar on Biomedical Engineering 2012

    CERN Document Server

    Bhatele, Mukta

    2013-01-01

    This book is a collection of articles presented by researchers and practitioners, including engineers, biologists, health professionals and informatics/computer scientists, interested in both theoretical advances and applications of information systems, artificial intelligence, signal processing, electronics and other engineering tools in areas related to biology and medicine in the All India Seminar on Biomedical Engineering 2012 (AISOBE 2012), organized by The Institution of Engineers (India), Jabalpur Local Centre, Jabalpur, India during November 3-4, 2012. The content of the book is useful to doctors, engineers, researchers and academicians as well as industry professionals.

  3. The Australian centre for RF bioeffects research (ACRBR) - an NHMRC centre of research excellence

    International Nuclear Information System (INIS)

    Wood, A.; Croft, R.; Abramson, M.; Anderson, V.; Cosic, I.; Finnie, J.; McKenzie, R.

    2004-01-01

    Full text: The Australian Centre for Radiofrequency Bioeffects Research (ACRBR) is a newly established multi-institutional research centre which seeks to research questions pertaining to possible health effects of exposure to radiofrequency devices, such as mobile phones and which is funded under the Australian National Health and Medical Research Council (NHMRC) Centres of Research Excellence funding program. The Centre of Research Excellence in Electromagnetic Energy is combining the efforts of engineers, epidemiologists, physicists, psychophysiologists and veterinary pathologists from RMIT University, the Institute of Medical and Veterinary Science in South Australia (IMVS), Monash University, Swinburne University of Technology and Telstra Research Laboratories (TRL). The centre is funded at $2.5 M over five years and will undertake a program of research to address the issue of exposure to radiofrequency (RF) devices and health. It will also train new scientists, keep the community informed of ongoing developments and help the development of government policies in this area of considerable public concern. The 5-year program has the following components: Neurobiology: One important area where there is a perceived research gap is in the area of potential neurological effects, which will hence be a major focus of this Centre. The proposed studies range from in vitro and in vivo research studies of RF effects on neuron and neural system functioning in rodents, to that of RF effects on simple neural function, cognition and subjective report in humans. The latter series of studies have been developed to account for the consensus view that more emphasis needs to be placed on possible differences in RF population sensitivity (e.g. youth versus aged, and ' electromagnetic hypersensitives'). Epidemiological studies are an important tool in studying the impact on public health from exposure of whole populations to modern radio technologies. Cancer outcomes in this area of

  4. Fifty years experiences in nuclear engineering education at Tokyo Institute of Technology

    International Nuclear Information System (INIS)

    Fujii, Yasuhiko; Saito, Masaki; Aritomi, Masanori

    2008-01-01

    Nuclear engineering education has been initiated in 1957 at the graduate school of Tokyo Institute of Technology. Educational activities have been conducted for fifty years under the support of the Research Laboratory for Nuclear Reactors. In the past fifty years, about 1000 Master students and 200 Doctoral students and 200 Doctoral students graduated from our Nuclear Engineering Department at Tokyo Institute of Technology. Many of them found their jobs in nuclear industries and institutes. International course of nuclear engineering was initiated in 1994, and so far about 90 students from 15 overseas countries have graduated from our Master and Doctoral Programs. In 2003, our proposal of 'Innovative Nuclear Energy System for the Sustainable World' was adopted as the Center of Excellent Program sponsored by Ministry of Education, Science and Technology. Recently a collaborative education network has been developed among Kanazawa University, Fukui University, Ibaraki University, Okayama University, Tokyo Institute of Technology and Japan Atomic Energy Agency. (author)

  5. Institute for Computer Applications in Science and Engineering (ICASE)

    Science.gov (United States)

    1984-01-01

    Research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, numerical analysis and computer science during the period April 1, 1983 through September 30, 1983 is summarized.

  6. Engineering Knowledge and Student Development: An Institutional and Pedagogical Critique of Engineering Education

    Science.gov (United States)

    Tang, Xiaofeng

    Educators have recommended the integration of engineering and the liberal arts as a promising educational model to prepare young engineers for global economic, environmental, sociotechnical, and ethical challenges. Drawing upon philosophy of technology, engineering studies, and educational psychology, this dissertation examines diverse visions and strategies for integrating engineering and liberal education and explores their impacts on students' intellectual and moral development. Based on archival research, interviews, and participant observation, the dissertation presents in-depth case studies of three educational initiatives that seek to blend engineering with the humanities, social sciences, and arts: Harvey Mudd College, the Picker Engineering Program at Smith College, and the Programs in Design and Innovation at Rensselaer Polytechnic Institute. The research finds that learning engineering in a liberal arts context increases students' sense of "owning" their education and contributes to their communication, teamwork, and other non-technical professional skills. In addition, opportunities for extensive liberal arts learning in the three cases encourage some students to pursue alternative, less technocentric approaches to engineering. Nevertheless, the case studies suggest that the epistemological differences between the engineering and liberal arts instructors help maintain a technical/social dualism among most students. Furthermore, the dissertation argues a "hidden curriculum," which reinforces the dominant ideology in the engineering profession, persists in the integrated programs and prevents the students from reflecting on the broad social context of engineering and critically examining the assumptions upheld in the engineering profession.

  7. British Engineers and Africa 1875-1914

    DEFF Research Database (Denmark)

    Andersen, Casper

    the imperial diasporas, identities and networks that developed as the British engineering profession established connections on the African continent. Using a wide range of primary sources that include correspondence, diaries, technical reports, institutional minutes and periodicals, Andersen reconstructs...... the networks and activities of Britain's engineers while focusing on London as a centre of imperial expansion. By treating Britain and the empire as an interconnected zone heanalyses the ways in whichideas , people and technologies circulated during the critical period....

  8. Humanitarian Aspirations of Engineering Students: Differences between Disciplines and Institutions

    Directory of Open Access Journals (Sweden)

    Angela R. Bielefeldt

    2016-03-01

    Full Text Available This study explored the aspirations of undergraduate engineering students in regard to helping others, examining potential differences between disciplines and institutions. Over 1900 undergraduate students from 17 U.S. universities responded to a survey in spring 2014. In open-ended responses, 15.5% of the students included some form of helping people and/or the world as one of the factors that motivated them to select their engineering major; for 6.7% of the students this was the primary or only motivating factor listed. Helping as a motivation was not equally prevalent among different engineering disciplines, being much more common among students majoring in biomedical, environmental, materials, and civil and less common in computer and aerospace. Different disciplines also varied in the priority for helping people relative to other future job factors - highest in chemical/biological, moderate in civil and related majors, and lowest among electrical/computer and mechanical. Institutional differences were found in the extent to which students indicated an importance that their career would help people and the extent to which an ability to help others was a central message in their major. The results indicate the percentages of engineering students who are most likely to embrace humanitarian engineering; fostering these aspirations in students could help with attraction and retention.

  9. Cosmic Rays in the 'Urusvati' Institute from Archives of Nicolas Roerich Centre-Museum (Moscow)

    International Nuclear Information System (INIS)

    Miroshnichenko, L I; V I Sidorov

    2013-01-01

    The history of cosmic ray study by means of ground-based methods in the 1930s contains some gaps. The press barely covered the study of cosmic rays at the 'Urusvati' Himalayan Research Institute that functioned in the Indian Himalayas in 1928-1939. Archival materials of the 'Urusvati' Institute now stored at the International Centre-Museum named after N.K. Roerich (Moscow), give evidence to the active participation of the Institute staff in the study of cosmic rays. By the initiative of A.H. Compton, in 1932 several expeditions on the studies of cosmic rays were organized in different parts of the world. One of these expeditions passed through the Himalayas in the region of the South-Eastern Ladakh. The report on this highland expedition which took place at the altitude of 19,500 feet above the sea level was published by J.M. Benade in the 'Urusvati Journal' (was issued during 1931-1933). Cooperation between George Roerich, the Institute Director, and Prof. J.M. Benade in expedition to Ladakh has been documented.

  10. Association of manual or engine-driven glide path preparation with canal centring and apical transportation: a systematic review.

    Science.gov (United States)

    Hartmann, R C; Peters, O A; de Figueiredo, J A P; Rossi-Fedele, G

    2018-04-28

    The role and effect of glide path preparation in root canal treatment remain controversial. This systematic review aims to compare apical transportation and canal centring of different glide path preparation techniques, with or without subsequent engine-driven root canal preparation. A database search in PubMed, PubMed Central, Embase, Scopus, EBSCO Dentistry & Oral Sciences Source and Virtual Health Library was conducted, using appropriate key words to identify the effect of glide path preparation (or its absence) on apical transportation and canal centring. An assessment for the risk of bias in included studies was carried out. Amongst 2146 studies, 18 satisfied the inclusion criteria. Nine studies assessed glide path preparation per se, comparing apical transportation and canal centring of rotary systems and/or manual files; eleven further investigations examined the efficacy of the glide path prior to final canal preparation with different engine-driven systems. Risk of bias and other study design features with potential influence on study outcomes and clinical implications were assessed. Based on the available evidence, and within the limitation of the studies included, preparation of a glide path using rotary sequences performs similarly (in most of the component studies) or significantly better than manual preparation when assessing apical transportation or canal centring. When compared to the absence of a glide path, canal shaping following glide path preparation was of similar, or significantly better quality, in regard to apical transportation or canal centring. © 2018 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  11. UCSD's Institute of Engineering in Medicine: fostering collaboration through research and education.

    Science.gov (United States)

    Chien, Shu

    2012-07-01

    The University of California, San Diego (UCSD) was established in 1961 as a new research university that emphasizes innovation, excellence, and interdisciplinary research and education. It has a School of Medicine (SOM) and the Jacobs School of Engineering (JSOE) in close proximity, and both schools have national rankings among the top 15. In 1991, with the support of the Whitaker Foundation, the Whitaker Institute of Biomedical Engineering was formed to foster collaborations in research and education. In 2008, the university extended the collaboration further by establishing the Institute of Engineering in Medicine (IEM), with the mission of accelerating the discoveries of novel science and technology to enhance health care through teamwork between engineering and medicine, and facilitating the translation of innovative technologies for delivery to the public through clinical application and commercialization.

  12. Community-centred Networks and Networking among Companies, Educational and Cultural Institutions and Research

    DEFF Research Database (Denmark)

    Konnerup, Ulla; Dirckinck-Holmfeld, Lone

    2010-01-01

    This article presents visions for community-centred networks and networking among companies, educational and cultural institutions and research based on blended on- and off-line collaboration and communication. Our point of departure is the general vision of networking between government, industry...... and research as formulated in the Triple Helix Model (Etzkowitz 2008). The article draws on a case study of NoEL, a network on e-learning among business, educational and cultural institutions and research, all in all 21 partners from all around Denmark. Focus is how networks and networking change character......’ in Networked Learning, Wenger et al. 2009; The analysis concerns the participation structure and how the network activities connect local work practices and research, and how technology and online communication contribute to a change from participation in offline and physical network activities into online...

  13. Evolutionary computing in Nuclear Engineering Institute/CNEN-Brazil

    International Nuclear Information System (INIS)

    Pereira, Claudio M.N.A.; Lapa, Celso M.F.; Lapa, Nelbia da Silva; Mol, Antonio C.

    2000-01-01

    This paper aims to discuss the importance of evolutionary computation (CE) for nuclear engineering and the development of this area in the Instituto de Engenharia Nuclear (IEN) at the last years. Are describe, briefly, the applications realized in this institute by the technical group of CE. For example: nuclear reactor core design optimization, preventive maintenance scheduling optimizing and nuclear reactor transient identifications. It is also shown a novel computational tool to implementation of genetic algorithm that was development in this institute and applied in those works. Some results were presents and the gains obtained with the evolutionary computation were discussing. (author)

  14. An assessment on the trustworthiness of engineers in higher tertiary institutions

    Science.gov (United States)

    Ooi Kuan, Tan; Lloyd, Ling; Mou Chuan, Cheng

    2017-10-01

    In Malaysian higher education history, the evolution from public funded to private funded and now to private non profit oriented model has been taking place since 80s. The evolution also demarcated higher learning institution into academic or research based university. As such, postgraduate studies became increasingly competitive in students intake. The evolution also created doubt to the public in term of the quality of postgraduate education offered by different classifications. This study investigates the gender specific perception and trustworthiness of engineering postgraduate students in private non profit oriented higher tertiary institution. An equally divided gender groups of 118 respondents were chosen for the study. Non-parametric statistics were used and the result showed that there was no difference and no correlation of genders in perception on teaching role and trustworthiness among the future engineers in private non profit oriented higher tertiary institution.

  15. The CCCB is a cultural centre, not a tourist centre

    Directory of Open Access Journals (Sweden)

    Elena Xirau

    2004-04-01

    Full Text Available Last February, Barcelona's Centre of Contemporary Culture (CCCB celebrated its first ten years in existence. During this time, this institution has looked to be a showcase to the most modern and innovative cultural expressions focused on reflecting on the concept of the city. In this interview, Josep Ramoneda offers his personal view, as the CCCB's director. He talks of how this cultural project was born, of how the concept of the institution took shape in the CCCB, of its relations with Barcelona's Strategic Plan, of how the project has evolved, of the architectural remodelling of the Casa de la Caritat building for its conversion into a cultural centre, of the relations with other institutions and its future.

  16. The formation of scientists and technicians at the 'Centre d'Etudes Nucleaires' at Saclay

    International Nuclear Information System (INIS)

    Debiesse, J.

    1958-01-01

    The considerable needs in research workers and scientists which are asked by the nuclear energy obliged the Commissariat a l'Energie atomique to deal with a particular effort to increase the quantitative and qualitative formation of scientists. Most various ways have been used. 1- A National Institute of Nuclear Sciences and Nuclear Techniques was created, by a joint decree of the Prime Minister and the Minister for National Education (june 18, 1957). This Institute of Higher Teaching (250 students) indulges in the following matters: atomic engineering, quantum mechanics, theory and technic of particle accelerators, special metallurgy, radiobiology, thermic and mechanics of fluids. 2- An associated centre of the 'Conservatoire National des Arts et Metiers' was created (200 students) for technical assistants, drawers, etc. 3- In contribution with both electronic industry and Ministry of Work, the Centre d'Etudes Nucleaires contributes to an accelerated formation of technical assistants into Professional Centres. Conclusion: Training of scientists and research workers is one of the most important activities of the Centre d'Etudes Nucleaires de Saclay. Without losing its technical efficiency, it has supplied and varied means adapted to the various purposes that we shall reach. (author) [fr

  17. Nuclear engineering in the National Polytechnic Institute

    International Nuclear Information System (INIS)

    Del Valle G, E.

    2008-12-01

    In the National Polytechnic Institute the bachelor degree in physics and mathematics, consists of 48 subjects in the common trunk. For the nuclear engineering option, from the fifth semester undergoing 9 specific areas within the Nuclear Engineering Department : introduction to nuclear engineering, power cycles thermodynamics, heat transfer, two courses of nuclear reactors theory, two of nuclear engineering, one course of laboratory and other of radiation protection. There is also a master in nuclear engineering aims train human resources in the area of power and research nuclear reactors to meet the needs of the nuclear industry in Mexico, as well as train highly qualified personnel in branches where are used equipment involving radiation and radioisotopes tale as Medicine, Agriculture and Industry. Among its compulsory subjects are: radiation interaction with the matter, measurements laboratory, reactor physics I and II, reactor engineering, reactor laboratory and thesis seminar. Optional, are: engineering of the radiation protection, computers in the nuclear engineering, nuclear systems dynamics, power plants safety, flow in two phases, reliability and risk analysis, nuclear power systems design, neutron transport theory. Many graduates of this degree have been and are involved in various phases of the nuclear project of Laguna Verde. The Nuclear Engineering Department has a subcritical nuclear reactor of light water and natural uranium and one isotopic source of Pu-Be neutrons of 5 Ci. It also has a multichannel analyzers, calibrated sources of alpha, beta and gamma radiation, a gamma spectrometer of high resolution and low background, a specialized library and one data processing center. In relation particularly to radiation protection, it is clear that there is a lack of specialists, as reflected in radiological control problems in areas such as medicine and industry. Given this situation, it is perceived to be required post-graduate studies at Master and Ph

  18. The WHATs and HOWs of maturing computational and software engineering skills in Russian higher education institutions

    Science.gov (United States)

    Semushin, I. V.; Tsyganova, J. V.; Ugarov, V. V.; Afanasova, A. I.

    2018-05-01

    Russian higher education institutions' tradition of teaching large-enrolled classes is impairing student striving for individual prominence, one-upmanship, and hopes for originality. Intending to converting these drawbacks into benefits, a Project-Centred Education Model (PCEM) has been introduced to deliver Computational Mathematics and Information Science courses. The model combines a Frontal Competitive Approach and a Project-Driven Learning (PDL) framework. The PDL framework has been developed by stating and solving three design problems: (i) enhance the diversity of project assignments on specific computation methods algorithmic approaches, (ii) balance similarity and dissimilarity of the project assignments, and (iii) develop a software assessment tool suitable for evaluating the technological maturity of students' project deliverables and thus reducing instructor's workload and possible overlook. The positive experience accumulated over 15 years shows that implementing the PCEM keeps students motivated to strive for success in rising to higher levels of their computational and software engineering skills.

  19. Paul Scherrer Institut Annual Report 2000: General Volume

    International Nuclear Information System (INIS)

    Salzmann, M.

    2001-01-01

    The Paul Scherrer Institute is a centre for multidisciplinary research in the natural and engineering sciences. It collaborates closely with universities, other research institutions, technical colleges, and industry, both in Switzerland and abroad. It is the largest research institute in Switzerland, with about 1'200 members of staff. Its particular areas of specialisation are solid-state research and material sciences, elementary particle physics and astrophysics, biology and medicine, and energy and environmental research. This annual report presents an overview of the work performed by the PSI research departments including information on new developments connected with the various accelerators and on the status of the Swiss Light Source project (SLS). Details on the organizational and financial structure of the Institute are also provided

  20. Paul Scherrer Institut Annual Report 2001: General Volume

    Energy Technology Data Exchange (ETDEWEB)

    Salzmann, M. (ed.)

    2002-07-01

    The Paul Scherrer Institute is a centre for multidisciplinary research in the natural and engineering sciences. It collaborates closely with universities, other research institutions, technical colleges, and industry, both in Switzerland and abroad. It is the largest research institute in Switzerland, with about 1'200 members of staff. Its particular areas of specialisation are solid-state research and material sciences, elementary particle physics and astrophysics, biology and medicine, and energy and environmental research. This annual report presents an overview of the work performed by the PSI research departments including information on new developments connected with the various accelerators and on the status of the Swiss Light Source project (SLS). Details on the organizational and financial structure of the Institute are also provided.

  1. Paul Scherrer Institut Annual Report 2000: General Volume

    Energy Technology Data Exchange (ETDEWEB)

    Salzmann, M [ed.

    2001-07-01

    The Paul Scherrer Institute is a centre for multidisciplinary research in the natural and engineering sciences. It collaborates closely with universities, other research institutions, technical colleges, and industry, both in Switzerland and abroad. It is the largest research institute in Switzerland, with about 1'200 members of staff. Its particular areas of specialisation are solid-state research and material sciences, elementary particle physics and astrophysics, biology and medicine, and energy and environmental research. This annual report presents an overview of the work performed by the PSI research departments including information on new developments connected with the various accelerators and on the status of the Swiss Light Source project (SLS). Details on the organizational and financial structure of the Institute are also provided.

  2. Paul Scherrer Institut Annual Report 1999: General Volume

    International Nuclear Information System (INIS)

    Salzmann, M.

    2000-01-01

    The Paul Scherrer Institute is a centre for multidisciplinary research in the natural and engineering sciences. It collaborates closely with universities, other research institutions, technical colleges, and industry, both in Switzerland and abroad. It is the largest research institute in Switzerland, with about 1'200 members of staff. Its particular areas of specialisation are solid-state research and material sciences, elementary particle physics and astrophysics, biology and medicine, and energy and environmental research. This annual report presents an overview of the work performed by the PSI research departments including information on new developments connected with the various accelerators and on the status of the Swiss Light Source project (SLS). Details on the organizational and financial structure of the Institute are also provided

  3. Paul Scherrer Institut Annual Report 1999: General Volume

    Energy Technology Data Exchange (ETDEWEB)

    Salzmann, M [ed.

    2000-07-01

    The Paul Scherrer Institute is a centre for multidisciplinary research in the natural and engineering sciences. It collaborates closely with universities, other research institutions, technical colleges, and industry, both in Switzerland and abroad. It is the largest research institute in Switzerland, with about 1'200 members of staff. Its particular areas of specialisation are solid-state research and material sciences, elementary particle physics and astrophysics, biology and medicine, and energy and environmental research. This annual report presents an overview of the work performed by the PSI research departments including information on new developments connected with the various accelerators and on the status of the Swiss Light Source project (SLS). Details on the organizational and financial structure of the Institute are also provided.

  4. Paul Scherrer Institut Annual Report 2001: General Volume

    Energy Technology Data Exchange (ETDEWEB)

    Salzmann, M [ed.

    2002-07-01

    The Paul Scherrer Institute is a centre for multidisciplinary research in the natural and engineering sciences. It collaborates closely with universities, other research institutions, technical colleges, and industry, both in Switzerland and abroad. It is the largest research institute in Switzerland, with about 1'200 members of staff. Its particular areas of specialisation are solid-state research and material sciences, elementary particle physics and astrophysics, biology and medicine, and energy and environmental research. This annual report presents an overview of the work performed by the PSI research departments including information on new developments connected with the various accelerators and on the status of the Swiss Light Source project (SLS). Details on the organizational and financial structure of the Institute are also provided.

  5. Paul Scherrer Institut Annual Report 2001: General Volume

    International Nuclear Information System (INIS)

    Salzmann, M.

    2002-01-01

    The Paul Scherrer Institute is a centre for multidisciplinary research in the natural and engineering sciences. It collaborates closely with universities, other research institutions, technical colleges, and industry, both in Switzerland and abroad. It is the largest research institute in Switzerland, with about 1'200 members of staff. Its particular areas of specialisation are solid-state research and material sciences, elementary particle physics and astrophysics, biology and medicine, and energy and environmental research. This annual report presents an overview of the work performed by the PSI research departments including information on new developments connected with the various accelerators and on the status of the Swiss Light Source project (SLS). Details on the organizational and financial structure of the Institute are also provided

  6. Paul Scherrer Institut Annual Report 1999: General Volume

    Energy Technology Data Exchange (ETDEWEB)

    Salzmann, M. [ed.

    2000-07-01

    The Paul Scherrer Institute is a centre for multidisciplinary research in the natural and engineering sciences. It collaborates closely with universities, other research institutions, technical colleges, and industry, both in Switzerland and abroad. It is the largest research institute in Switzerland, with about 1'200 members of staff. Its particular areas of specialisation are solid-state research and material sciences, elementary particle physics and astrophysics, biology and medicine, and energy and environmental research. This annual report presents an overview of the work performed by the PSI research departments including information on new developments connected with the various accelerators and on the status of the Swiss Light Source project (SLS). Details on the organizational and financial structure of the Institute are also provided.

  7. Paul Scherrer Institut Annual Report 2000: General Volume

    Energy Technology Data Exchange (ETDEWEB)

    Salzmann, M. [ed.

    2001-07-01

    The Paul Scherrer Institute is a centre for multidisciplinary research in the natural and engineering sciences. It collaborates closely with universities, other research institutions, technical colleges, and industry, both in Switzerland and abroad. It is the largest research institute in Switzerland, with about 1'200 members of staff. Its particular areas of specialisation are solid-state research and material sciences, elementary particle physics and astrophysics, biology and medicine, and energy and environmental research. This annual report presents an overview of the work performed by the PSI research departments including information on new developments connected with the various accelerators and on the status of the Swiss Light Source project (SLS). Details on the organizational and financial structure of the Institute are also provided.

  8. The formation of scientists and technicians at the 'Centre d'Etudes Nucleaires' at Saclay; Formation des scientifiques et des techniciens au Centre d'Etudes Nucleaires de Saclay

    Energy Technology Data Exchange (ETDEWEB)

    Debiesse, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The considerable needs in research workers and scientists which are asked by the nuclear energy obliged the Commissariat a l'Energie atomique to deal with a particular effort to increase the quantitative and qualitative formation of scientists. Most various ways have been used. 1- A National Institute of Nuclear Sciences and Nuclear Techniques was created, by a joint decree of the Prime Minister and the Minister for National Education (june 18, 1957). This Institute of Higher Teaching (250 students) indulges in the following matters: atomic engineering, quantum mechanics, theory and technic of particle accelerators, special metallurgy, radiobiology, thermic and mechanics of fluids. 2- An associated centre of the 'Conservatoire National des Arts et Metiers' waeated (200 students) for technical assistants, drawers, etc. 3- In contribution with both electronic industry and Ministry of Work, the Centre d'Etudes Nucleaires contributes to an accelerated formation of technical assistants into Professional Centres. Conclusion: Training of scientists and research workers is one of the most important activities of the Centre d'Etudes Nucleaires de Saclay. Without losing its technical efficiency, it has supplied and varied means adapted to the various purposes that we shall reach. (author)Fren. [French] Les besoins considerables actuels et previsibles en chercheurs et scientifiques necessites par l'avevement de l'energie nucleaire imposaient au Commissariat a I'Energie atomique un effort particulier pour augmenter la formation quantitative et qualitative des scientifiques. Les moyens les plus divers ont ete mis en oeuvre: 1- Creation de l'Institut National des Sciences et Techniques Nucleaires par decret de la Presidence du Conseil et de l'Education Nationale en date du 18.6.57. Cet Institut d'Enseignement Superieur (250 etudiants) donne des cours en: genie atomique, mecanique quantique, theorie et technique des Accelerateurs de particules, metallurgie speciale, radiobiologie

  9. Canadian Irradiation Centre

    International Nuclear Information System (INIS)

    1987-05-01

    The Canadian Irradiation Centre is a non-profit cooperative project between Atomic Energy of Canada Limited, Radiochemical Company and Universite du Quebec, Institut Armand-Frappier, Centre for Applied Research in Food Science. The Centre's objectives are to develop, demonstrate and promote Canada's radiation processing technology and its applications by conducting applied research; training technical, professional and scientific personnel; educating industry and government; demonstrating operational and scientific procedures; developing processing procedures and standards, and performing product and market acceptance trials. This pamphlet outlines the history of radoation technology and the services offered by the Canadian Irradiation Centre

  10. North-South Institute Institutional Grant 2011-2012 | CRDI - Centre ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The North-South Institute (NSI) is an established independent thinktank in Canada whose work focuses on international development, poverty reduction and global inequalities. Building on a long history of collaboration between NSI and IDRC, this grant will provide the Institute with core support for 2011-2012. NSI activities ...

  11. National Strategies for Staff and Faculty Development in Engineering Education in Denmark

    DEFF Research Database (Denmark)

    Vinther, Ole; Kolmos, Anette

    2002-01-01

    Increasing emphasis is being placed on establishing teaching and learninge centres at the institutional level with the stated objective of improving the quality of teaching and education. The article describes Denmark´s IPN, which consists of five engineering colleges and three universities...

  12. Activities of the Institute for Computer Applications in Science and Engineering

    Science.gov (United States)

    1985-01-01

    Research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, numerical analysis, and computer science during the period April 1, 1985 through October 2, 1985 is summarized.

  13. European Master of Science in Nuclear Engineering

    International Nuclear Information System (INIS)

    Moons, F.; Safieh, J.; Giot, M.; Mavko, B.; Sehgal, B.R.; Schaefer, A.; Goethem, G. van; D'haeseleer, W.

    2004-01-01

    The need to preserve, enhance or strengthen nuclear knowledge is worldwide recognised since a couple of years. It appears that within the European university education and training network, nuclear engineering is presently sufficiently covered, although somewhat fragmented. To take up the challenges of offering top quality, new, attractive and relevant curricula, higher education institutions should cooperate with industry, regulatory bodies and research centres, and more appropriate funding a.o. from public and private is to be re-established. More, European nuclear education and training should benefit from links with international organisations like IAEA, OECD-NEA and others, and should include world-wide cooperation with academic institutions and research centres. The European master in nuclear engineering guarantees a high quality nuclear education in Europe by means of stimulating student and instructor exchange, through mutual checks of the quality of the programmes offered, by close collaboration with renowned nuclear-research groups at universities and laboratories. The concept for a nuclear master programme consists of a solid basket of recommended basic nuclear science and engineering courses, but also contains advanced courses as well as practical training. Some of the advanced courses also serve as part of the curricula for doctoral programmes. A second important issue identified is Continued Professional Development. In order to achieve the objectives and practical goals described above, the ENEN association was formed. This international, non-profit association is be considered as a step towards a virtual European Nuclear University symbolising the active collaboration between various national institutions pursuing nuclear education. (author)

  14. Introducing the Institute of Physics in Engineering and Medicine (IPEM)

    Science.gov (United States)

    Keevil, Stephen F.

    2014-04-01

    Physics in Medicine and Biology is one of three journals owned by the UK based Institute of Physics and Engineering in Medicine (IPEM), along with Physiological Measurement and Medical Engineering and Physics. IPEM is a charity and journal revenues are a vital part of our income stream. By subscribing to our journals, you are helping to support the work of IPEM, so you may be interested to learn more about who we are and what we do. IPEM aims to advance physics and engineering applied to medicine and biology for the public good. Our membership comprises over 4000 physicists, engineers and technologists working in healthcare, academia and industry. Most of our work depends on these members generously volunteering their expert knowledge and extensive experience to work in the following areas. Promoting research and innovation Along with the scientific journals mentioned above, we also regularly produce scientific reports. There are currently 40 IPEM reports in print, as well as reference books such as The Gamma Camera—A Comprehensive Guide and the recently published Physicists and Physicians: A History of Medical Physics from the Renaissance to Röntgen. Publishing is just one way in which we encourage R&D and increase the uptake of new knowledge and innovations. We also support scientific conferences, such as the International Conference on Medical Physics 50th anniversary meeting, which we hosted in 2013 on behalf of the International Organization for Medical Physics (IOMP). This four-day event explored the contribution that physics and engineering can make to healthcare and showcased the latest developments via 312 international speakers, 212 posters and an exhibition. Our awards, travel bursaries and grants enable us to facilitate, recognize and reward the work of our members. In 2012 we awarded almost #95 000 (around 155 000) this way. Championing the sector IPEM provides a unified voice with which to represent the views of our membership and raise the

  15. 45th IGE (Institute of Gas Engineers) Autumn Meeting

    Energy Technology Data Exchange (ETDEWEB)

    Riley, T; De Winton, C

    1980-01-01

    Topics discussed at the 45th Institute of Gas Engineers Autumn Meeting (London, 1979) are outlined, including safety standards and recommendations for gas transmission and distribution systems, gas characteristics and utilization, heat transfer research, gas receiver stresses, the potential of hydrogen as an energy fuel, gas appliances and controls, pipe failure, refactories in gasifiers, synthetic natural gas, coal conversion techniques, and technological innovations.

  16. Training centres in Latin America

    International Nuclear Information System (INIS)

    1959-01-01

    Early 1958 the Brazilian representative on the Board of Governors of the International Atomic Energy Agency - supported by the Governors from Argentina and Guatemala -proposed that a study should be made of the possibility of setting up one or more atomic energy training centres in Latin America. On the Board's recommendation, the Director General of the Agency appointed a fact-finding team to make anon-the-spot study. In drafting this report the team was invited to consider the following points: (a) The need for establishing one or more regional training centres; (b) Existing facilities that are being or could be used for training, together with technical data concerning them; (c) The general scientific technological and industrial conditions of the countries visited insofar as they have a bearing on their training needs and capabilities. The authors of the report conclude that 'a training centre in radio-botany should provide vitally needed knowledge and vitally needed specialists to all the agricultural installations in Latin America. A training centre like this might provide an excellent model upon which to base training centres in other areas'. The report recommends that: 1. The Agency should meet the requests of Latin American universities by, for example, supplying equipment and sending experts; 2. At least one specialized training centre should be established as soon as possible. Taking as an example the field of radio-botany, such a centre would provide trained specialists in radio-botany to agricultural institutions throughout Latin America and also provide basic research results vital to agriculture. The cost of new facilities might be of the order of $7 500 000, with an annual budget of approximately $650 000. Staff required: 40 scientists and 175 employees; 3. Whenever it appears feasible to gather necessary staff of high creative ability and established productivity and when funds can be made available for facilities, equipment and operating costs, at

  17. Training centres in Latin America

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1959-04-15

    Early 1958 the Brazilian representative on the Board of Governors of the International Atomic Energy Agency - supported by the Governors from Argentina and Guatemala -proposed that a study should be made of the possibility of setting up one or more atomic energy training centres in Latin America. On the Board's recommendation, the Director General of the Agency appointed a fact-finding team to make anon-the-spot study. In drafting this report the team was invited to consider the following points: (a) The need for establishing one or more regional training centres; (b) Existing facilities that are being or could be used for training, together with technical data concerning them; (c) The general scientific technological and industrial conditions of the countries visited insofar as they have a bearing on their training needs and capabilities. The authors of the report conclude that 'a training centre in radio-botany should provide vitally needed knowledge and vitally needed specialists to all the agricultural installations in Latin America. A training centre like this might provide an excellent model upon which to base training centres in other areas'. The report recommends that: 1. The Agency should meet the requests of Latin American universities by, for example, supplying equipment and sending experts; 2. At least one specialized training centre should be established as soon as possible. Taking as an example the field of radio-botany, such a centre would provide trained specialists in radio-botany to agricultural institutions throughout Latin America and also provide basic research results vital to agriculture. The cost of new facilities might be of the order of $7 500 000, with an annual budget of approximately $650 000. Staff required: 40 scientists and 175 employees; 3. Whenever it appears feasible to gather necessary staff of high creative ability and established productivity and when funds can be made available for facilities, equipment and operating costs, at

  18. Indian Chemical Engineering Congress 1995: 48th annual session of Indian Institute of Chemical Engineers: abstracts and invited lectures

    International Nuclear Information System (INIS)

    1995-01-01

    The 48th Annual Session of Indian Institute of Chemical Engineers was held in Kalpakkam during December 27-30, 1995. The book contains the proceeding of the conference, both abstracts and invited lectures. The topics covered included various aspects pertaining to chemical engineering and technology along with the chemical and engineering processes relevant to nuclear fuel cycle like uranium ore processing, fuel fabrication, reactor operation, fuel reprocessing and radioactive waste management. Papers relevant to INIS are indexed separately

  19. Environmental gamma radiation levels around various DAE research centres

    International Nuclear Information System (INIS)

    Takale, R.A.; Swarnakar, M.; Shetty, P.G.; Sahu, S.K.; Pandit, G.G.

    2014-01-01

    This paper presents the gamma radiation levels of four research centres viz. Bhabha Atomic Research Centre (BARC), Trombay; Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam; Variable Energy Cyclotron Centre (VECC), Kolkata; Raja Ramanna Centre for Advanced Technology (RRCAT), Indore; and an industry Board of Radiation and Isotope Technology (BRIT), Vashi. BARC is India's premier nuclear research facility and is a multi-disciplinary research centre with extensive infrastructure for advanced research and development (R and D). IGCAR, Kalpakkam is engaged in scientific research and advanced engineering programme towards the development of Fast Breeder Reactor technology. VECC Kolkata is dedicated to carry out frontier R and D in the fields of Accelerator Science and Technology, Nuclear Science (Theoretical and Experimental), and Material Science etc. RRCAT, Indore has rapidly grown into a premier institute for R and D in lasers, accelerators and their applications. BRIT, Vashi unit is involved in production, development, and supply of radioisotope based products and provision of isotope applications, radiation processing, radio analytical services etc. With an objective to keep a watch on the prevailing environmental background gamma radiation level around all the DAE installations, routine monitoring programme are being carried out using the Thermo Luminescent Dosimeters (TLDs). TLDs provide the simple, inexpensive and precise measurement of small, integrated, external gamma radiation dose rate. The general practice of this programme is to observe the outdoor gamma radiation levels. This paper summarizes the methodology and gamma radiation levels of four research centres viz. BARC, IGCAR, VECC, RRCAT and an industry BRIT, Vashi

  20. The history of fifty years of institute of electrical engineers 1947-1996

    International Nuclear Information System (INIS)

    1997-07-01

    This book starts with the survey of a century of Korea electrical industry. It includes a business of electric power and electrical machinery industry. Next, it deals with the survey of fifty years of Korea institute electrical engineers. Then, it enumerates the articles of association, organization, board members, the role of the administrative organization, study and institute business activities in detail.

  1. Activities of the Institute for Computer Applications in Science and Engineering (ICASE)

    Science.gov (United States)

    1988-01-01

    This report summarizes research conducted at the Institute for Computer Applications Science and Engineering in applied mathematics, numerical analysis, and computer science during the period October 2, 1987 through March 31, 1988.

  2. [Research Conducted at the Institute for Computer Applications in Science and Engineering

    Science.gov (United States)

    1997-01-01

    This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, fluid mechanics, and computer science during the period 1 Oct. 1996 - 31 Mar. 1997.

  3. Engineering NV centres in Synthetic Diamond

    International Nuclear Information System (INIS)

    Matthew Markham

    2014-01-01

    The quantum properties of the nitrogen vacancy (NV) centre in diamond has prompted rapid growth in diamond research. This initial growth was driven by the fact the NV centre provides an 'easy' to manipulate quantum system along with opening up the possibility of a new material to deliver a solid state quantum computer. The NV defect is now moving from a quantum curiosity to a commercial development platform for a range of application such as as gyroscopes, timing and magnetometry as well as the more traditional quantum technologies such as quantum encryption and quantum simulation. These technologies are pushing the development needs of the material, and the processing of that material. The paper will describes the advances in CVD diamond synthesis with special attention to getting NV defects close to the surface of the diamond and how to process the material for diamond quantum optical applications. (author)

  4. Nuclear engineering experiments at experimental facilities of JNC in graduate course of Tokyo Institute of Technology

    International Nuclear Information System (INIS)

    Hayashizaki, Noriyosu; Takahashi, Minoru; Aoyama, Takafumi; Onose, Shoji

    2005-01-01

    Nuclear engineering experiments using outside facilities of the campus have been offered for graduate students in the nuclear engineering course in Tokyo Institute of Technology (Tokyo Tech.). The experiments are managed with the collaboration of Japan Nuclear Cycle Development Institute (JNC), Japan Atomic Energy Research Institute (JAERI) and Research Reactor Institute, Kyoto University (KUR). This report presents the new curriculum of the nuclear engineering experiments at JNC since 2002. The change is due to the shutdown of Deuterium Criticality Assembly Facility (DCA) that was used as an experimental facility until 2001. Reactor physics experiment using the training simulator of the experimental fast reactor JOYO is continued from the previous curriculum with the addition of the criticality approach experiment and control rods calibration. A new experimental subject is an irradiated material experiment at the Material Monitoring Facility (MMF). As a result, both are acceptable as the student experiments on the fast reactor. (author)

  5. How EPRI [Electric Power Research Institute] helps utilities save money

    International Nuclear Information System (INIS)

    Anon.

    1996-01-01

    A number of case studies are presented which illustrate how the work of the Electric Power Research Institute in the USA has enabled nuclear utilities to save money. The areas covered by the examples are: steam generator tube repair; streamlining of reliability centred maintenance; cost effective instrumentation and control maintenance; reducing the frequency of instrument calibration; optimising the engineering change process; detecting and reducing fuel failure; extending the qualified life of equipment. (U.K.)

  6. Annual technical report - 1987 - Nuclear Engineering Institute - Dept. of Physics

    International Nuclear Information System (INIS)

    Silva, A.G. da; Cabral, S.C.; Bastos, M.A.V.

    1987-01-01

    The research reports carried out in the Physics Department of Nuclear Engineering Institute/Brazilian CNEN, in nuclear physics, isotope production and hazards by irradiation using the CV-28 cyclotron capable to accelerate protons, deuterons, helium and alpha particles with maximum energies of 24, 14, 36 and 28 MeV, respectively, are presented. (M.C.K.) [pt

  7. The Karlsruhe Nuclear Research Centre is being re-equipped

    International Nuclear Information System (INIS)

    Boehm, H.; Koerting, K.; Huncke, W.; Knapp, W.

    1986-01-01

    The Nuclear Research Centre in Karlsruhe was established over 25 years ago for the express purpose of studying nuclear engineering and its peaceful use. This goal has been achieved - what now. For some time a change has been taking place at the Research Centre: in the direction of man and environmental engineering. 'Bild der Wwissenschaft' has talked to Professor Horst Boehm, the chairman of the Nuclear Centre, about this change and the new areas of research to be concentrated on. (orig.) [de

  8. Institutional radioactive waste management in the Nuclear Research Institute Rez plc

    International Nuclear Information System (INIS)

    Kovarik, P.; Svoboda, K.; Podlaha, J.

    2008-01-01

    Nuclear research institute Rez, plc. (mentioned below as NRI) has had a dominant position in the area of the nuclear research and development in the Czech Republic, the Central and the Eastern Europe. Naturally, the radioactive waste management is an integral part of the nuclear industry, research and development. For that reason, there is Centre of the radioactive waste management (mentioned below as Centre) in the NRI. This Centre is engaged in the radioactive waste treatment, decontamination, characterisation, decommissioning and other relevant activities. This paper describes the system of technology and other information about institutional radioactive waste management in the NRI. (authors)

  9. SYNBIOCHEM Synthetic Biology Research Centre, Manchester – A UK foundry for fine and speciality chemicals production

    Directory of Open Access Journals (Sweden)

    Le Feuvre RA

    2016-12-01

    Full Text Available The UK Synthetic Biology Research Centre, SYNBIOCHEM, hosted by the Manchester Institute of Biotechnology at the University of Manchester is delivering innovative technology platforms to facilitate the predictable engineering of microbial bio-factories for fine and speciality chemicals production. We provide an overview of our foundry activities that are being applied to grand challenge projects to deliver innovation in bio-based chemicals production for industrial biotechnology.

  10. The WHATs and HOWs of Maturing Computational and Software Engineering Skills in Russian Higher Education Institutions

    Science.gov (United States)

    Semushin, I. V.; Tsyganova, J. V.; Ugarov, V. V.; Afanasova, A. I.

    2018-01-01

    Russian higher education institutions' tradition of teaching large-enrolled classes is impairing student striving for individual prominence, one-upmanship, and hopes for originality. Intending to converting these drawbacks into benefits, a Project-Centred Education Model (PCEM) has been introduced to deliver Computational Mathematics and…

  11. The Woman Engineering Academic: An Investigation of Departmental and Institutional Environments.

    Science.gov (United States)

    McKendall, Sherron Benson

    2000-01-01

    Interviewed women engineering faculty at two universities to determine their experiences and perceptions of departmental and institutional environments. Most participants had experienced some type of isolation or singling out due to gender. Some questioned whether they were overreacting. Many had difficulty balancing home and work lives.…

  12. Annual report 1988-89: Tata Institute of Fundamental Research

    International Nuclear Information System (INIS)

    Isloor, J.D.

    1989-01-01

    The annual report surveys the work of the Tata Institute of Fundamental Research (TIFR), Bombay, during the fiscal year 1988-89. Most of the research activities are organised and carried out in two schools of the Institute, namely, the School of Mathematics and the School of Physics. In the School of Mathematics, active research is carried out in almost every branch of pure mathematics. The School of Physics is engaged in research activities of both theoretical and experimental nature in high energy physics, astrophysics, cosmic rays, space physics, astronomy, nuclear and atomic physics, condensed matter physics, molecular biology, computer science and communication and microwave engineering. TIFR has a Basic Dental Research Unit which carries out intervention studies on oral cancer and precancerous lesions. Its Homi Bhabha Centre for Science Education (HBCSE) carries out programmes for improvement of science education at all levels in the country. TIFR outstation units are: (1) TIFR Centre at Bangalore which in collaboration with the Indian Institute of Science, Bangalore has a programme in Applications of Mathematics (2) Radio Astronomy Centre, Ooty, (3) Baloon Facility, Hyderabad and (4) National Image Processing Facility, Ooty. The academic and research activities of the schools, new technique and instruments and experimental facilities developed and fabricated by various units of TIFR are briefly described. Faculty and section wise list of staff members is given. Lists of publications by the members and other activities such as colloquia, seminars, conferences etc. are also given. (M.G.B.)

  13. CANDU 9 Control Centre Mockup

    International Nuclear Information System (INIS)

    Webster, A.; Macbeth, M.J.

    1996-01-01

    This paper provides a summary of the design process being followed, the benefits of applying a systematic design using human factors engineering, presents an overview of the CANDU 9 control centre mockup facility, illustrates the control centre mockup with photographs of the 3D CADD model and the full scale mockup, and provides an update on the current status of the project. (author)

  14. Proceedings of chemical engineering in nuclear technology - national seminar on recent advances in fuel cycle technologies: book of abstracts

    International Nuclear Information System (INIS)

    2014-01-01

    Kalpakkam Regional Centre of Indian Institute of Chemical Engineers is embarking on conducting a series of national seminars on Chemical Engineering in Nuclear Technology 2014. For CHEMENT-2014 the theme was Seminar on recent advances in fuel cycle technologies. The topics covered included research and development, modeling and simulation and equipment development. Papers relevant to INIS are indexed separately

  15. International research centre launched

    International Nuclear Information System (INIS)

    1965-01-01

    Full text: The first scientific research and educational institution to be set up on a completely international basis was officially inaugurated in Trieste on 5 October 1964 by the Director General of IAEA, Dr. Sigvard Eklund, when he opened the first seminar of the International Centre for Theoretical Physics. As evidence of the international nature of the institution he noted that the scientists who would work and teach there during the first year represented sixteen different countries. By the end of 1964, the Centre building was nearing completion and three of the five floors were occupied. A successful symposium had been held on the subject of plasma physics, and a score of professors and fellows were at work, from Bulgaria, Czechoslovakia, Greece, India, Japan, Jordan, the Netherlands, Norway, Pakistan, Poland, the United Kingdom, and the United States. A dozen scientific papers had been issued as preprints. The main purpose of the Centre is to foster the advancement of theoretical physics through training and research; at first the chief subject will be high-energy and elementary particle physics. Plasma physics, low energy physics and solid-state physics will also be dealt with. Special attention is paid to the needs of the developing countries. Of the 25 fellows selected for the academic year 1964-65, more than half are from South America, Africa and Asia. In conjunction with the Research Centre, there is an Advanced School for theoretical Physics to provide graduate training for fellows who need such preparation before they embark upon research. The Centre works under the guidance of a Scientific Council comprising the president, Prof. M. Sandoval-Vallarta (Nuclear Energy Commission of Mexico); Prof. A. Abragam (Saclay, France); Prof. R. Oppenheimer (Institute for Advanced Study, Princeton, USA); Dr. V. Soloviev (Dubna, USSR); Prof V.F. Weiskopf (Director General, CERN) ; Prof Abdus Salam (Imperial College, London) ; Prof. P. Budini (University of Trieste

  16. Web server of the Centre for Photonuclear Experiments Data of the Scientific Research Institute for Nuclear Physics, Moscow State University: Hypertext version of the nuclear physics database

    Energy Technology Data Exchange (ETDEWEB)

    Boboshin, I N; Varlamov, A V; Varlamov, V V; Rudenko, D S; Stepanov, M E [D.V. Skobel' tsyn Scientific Research Institute for Nuclear Physics, M.V. Lomonosov Moscow State University, Centre for Photonuclear Experiments Data (Russian Federation)

    2001-02-01

    The nuclear databases which have been developed at the Centre for Photonuclear Experiments Data of the D.V. Skobel'tsyn Scientific Research Institute for Nuclear Physics, M.V. Lomonosov Moscow State University, and put on the Centre's web server, are presented. The possibilities for working with these databases on the Internet are described. (author)

  17. Web server of the Centre for Photonuclear Experiments Data of the Scientific Research Institute for Nuclear Physics, Moscow State University: Hypertext version of the nuclear physics database

    International Nuclear Information System (INIS)

    Boboshin, I.N.; Varlamov, A.V.; Varlamov, V.V.; Rudenko, D.S.; Stepanov, M.E.

    2001-01-01

    The nuclear databases which have been developed at the Centre for Photonuclear Experiments Data of the D.V. Skobel'tsyn Scientific Research Institute for Nuclear Physics, M.V. Lomonosov Moscow State University, and put on the Centre's web server, are presented. The possibilities for working with these databases on the Internet are described. (author)

  18. UICEE Centre for Problem Based Learning (UCPBL) at Aalborg University

    DEFF Research Database (Denmark)

    Fink, Flemming Kobberøe; Enemark, Stig; Moesby, Egon

    2002-01-01

    University is considered to have a strong position in Problem-Based Learning (PBL) with many years of experience. Within engineering education co-operation with industry has also always been a field of high importance for Aalborg University and part of the PBL concept. An increasing number of universities...... and engineering schools worldwide are consequently seeking consultancy and cooperation with Aalborg University. The establishment of UCPBL is therefore welcomed as a possibility to merge these activities into one organisational structure and to strengthen the effort of improving engineering education......UICEE Centre for Problem-Based Learning (UCPBL) is a global centre for Problem-Based Learning located at Aalborg University, Denmark UCPBL is established as a partner to the UNESCO International Centre for Engineering Education (UICEE) located at Monash University, Melbourne, Australia. Aalborg...

  19. A Curriculum Model: Engineering Design Graphics Course Updates Based on Industrial and Academic Institution Requirements

    Science.gov (United States)

    Meznarich, R. A.; Shava, R. C.; Lightner, S. L.

    2009-01-01

    Engineering design graphics courses taught in colleges or universities should provide and equip students preparing for employment with the basic occupational graphics skill competences required by engineering and technology disciplines. Academic institutions should introduce and include topics that cover the newer and more efficient graphics…

  20. Community Documentation Centre on Industrial Risk. Bulletin no. 8

    International Nuclear Information System (INIS)

    Masera, M.; Rasmussen, K.

    1993-01-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  1. Community Documentation Centre on Industrial Risk. Bulletin no. 4

    International Nuclear Information System (INIS)

    Gow, H.B.F.

    1991-01-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  2. Community Documentation Centre on Industrial Risk. Bulletin no. 10

    International Nuclear Information System (INIS)

    Perschke, A.; Kirchsteiger, C.

    1996-01-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  3. Community Documentation Centre on Industrial Risk. Bulletin no. 5

    International Nuclear Information System (INIS)

    Gow, H.B.F.

    1991-11-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  4. Community Documentation Centre on Industrial Risk. Bulletin no. 7

    International Nuclear Information System (INIS)

    Gow, H.B.F.; Carditello, I.

    1993-04-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  5. Community Documentation Centre on Industrial Risk. Bulletin no. 9

    International Nuclear Information System (INIS)

    Perschke, A.

    1995-01-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  6. Community Documentation Centre on Industrial Risk. Bulletin no. 6

    International Nuclear Information System (INIS)

    Gow, H.B.F.

    1992-06-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  7. Community Documentation Centre on Industrial Risk. Bulletin no. 11

    International Nuclear Information System (INIS)

    Perschke, A.; Kirchsteiger, C.; Carnevali, C.

    1997-01-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  8. Research in progress at the Institute for Computer Applications in Science and Engineering

    Science.gov (United States)

    1987-01-01

    This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, numerical analysis, and computer science during the period April 1, 1987 through October 1, 1987.

  9. The activity of Moscow Engineering Physics Institute

    International Nuclear Information System (INIS)

    Levedev, L.

    1994-01-01

    Various information about Moscow Engineering Physics Institute (MEPhI) structure and scientific activity are discussed. The four main faculties of MEPhI: the faculty of theoretical and experimental physics, the faculty of technical physics, the faculty of automatics and electronics and the faculty of cybernetics are being written in this report. The information about the research reactors and the scientific research laboratories is also presented. The participation of MEPhI in the state scientific technological programs such as 'High energy physics', 'High-temperature superconductivity', 'Controlled thermonuclear synthesis and plasma processes'. 'Informatization', 'Security of population and industrial objects on account of hazard of natural and technogenic accidents', 'Ecology of Russia', 'Synchrotron radiation and its application', 'Future technologies, machines and productions' and others are presented too. (author)

  10. The metallurgy, science and engineering

    International Nuclear Information System (INIS)

    Pineau, A.; Quere, Y.

    2011-01-01

    . 4. An inter-ministerial commission should be created for 3 years (see chapter 3, recommendation 6), at the initiative of the Ministries in charge of industry, research and education. It should include an equal number of academic and industrial participants, both French and foreign. Within the year following its creation, the commission should quickly provide suggestions to the government concerning, in particular, the following points. In the two years that follow its creation, the commission will oversee their implementation. - Training and Research: measures relative to points 2. and 3. above, in particular the creation of 'Poles' (academic consortia) summarised in point 5. below. - Middle size businesses. connections should be created with the research community (technical centres and metallurgical engineering facilities, in particular based on local laboratories. - Maintaining in France a substantial industrial research, with strong links to European research. 5. The commission, at the end of a rigorous procedure, should create a certain number (2 to 4) of teaching/research consortia (or metallurgical institutes, see chapter 3, recommendation 8) to strengthen collaborations between public laboratories and industrial research centres (French and European), in particular through reciprocal exchange of researchers. The objective of the report is that metallurgical industry, which has created wealth and employment and has close ties to many economic activities, maintains in France the prominent position that it has successfully reached and that its recent decline (research/innovation/production) be stopped using the consortia mentioned in 5. (authors)

  11. The Woman Engineering Academic: An Investigation of Departmental and Institutional Environments. ASHE Annual Meeting Paper.

    Science.gov (United States)

    Benson, Sherron D.

    This study used grounded theory methodology to investigate the institutional and departmental climates of women engineering faculty. Seven female engineering faculty from two universities completed semi-structured interviews that were coded for common themes. All the participants indicated that they had had a natural interest or talent for science…

  12. Key Barriers for Academic Institutions Seeking to Retain Female Scientists and Engineers: Family-Unfriendly Policies. Low Numbers, Stereotypes, and Harassment

    Science.gov (United States)

    Rosser, Sue V.; Lane, Eliesh O'neil

    At the end of a special meeting held at the Massachusetts Institute of Technology in January 2001, a statement released on behalf of the most prestigious U. S. research universities suggested that institutional harriers have prevented viomen from having a level playing field in science and engineering. In 2001, the National Science Foundation initiated a new awards program, ADVANCE, focusing on institutional rather than individual solutions to empower women to participate fully in science and technology. In this study, the authors evaluate survey responses from almost 400 Professional Opportunities for Women in Research and Education awardees from fiscal years 1997 to 2000 to elucidate problems and opportunities identified by female scientists and engineers. Besides other issues, the respondents identified balancing a career and a family as the most significant challenge facing female scientists and engineers today. Institutions must seek to remove or at least lower these and other harriers to attract and retain female scientists and engineers. Grouping the survey responses into four categories forms the basis for four corresponding policy areas, which could be addressed at the institutional level to mitigate the difficulties and challenges currently experienced by female scientists and engineers.

  13. Role of Database Management Systems in Selected Engineering Institutions of Andhra Pradesh: An Analytical Survey

    Directory of Open Access Journals (Sweden)

    Kutty Kumar

    2016-06-01

    Full Text Available This paper aims to analyze the function of database management systems from the perspective of librarians working in engineering institutions in Andhra Pradesh. Ninety-eight librarians from one hundred thirty engineering institutions participated in the study. The paper reveals that training by computer suppliers and software packages are the significant mode of acquiring DBMS skills by librarians; three-fourths of the librarians are postgraduate degree holders. Most colleges use database applications for automation purposes and content value. Electrical problems and untrained staff seem to be major constraints faced by respondents for managing library databases.

  14. College of Engineering alumnus honored with American Institute of Aeronautics and Astronautics Abe M. Zarem Award

    OpenAIRE

    Nystrom, Lynn A.

    2009-01-01

    Adam Cowling, a recent master's graduate of Virginia Tech's Aerospace and Ocean Engineering Department in the College of Engineering, is the 2009 recipient of the American Institute of Aeronautics and Astronautics (AIAA) Abe M. Zarem Award for Distinguished Achievement in Astronautics.

  15. Summer School organized by the International Centre for Theoretical Physics, Trieste, and the Institute for Information Sciences, University of Tübingen

    CERN Document Server

    Güttinger, Werner; Cin, Mario

    1974-01-01

    This volume is the record and product of the Summer School on the Physics and Mathematics of the Nervous System, held at the International Centre for Theoretical Physics in Trieste from August 21-31, 1973, and jointly organized by the Institute for Information Sciences, University of Tlibingen and by the Centre. The school served to bring biologists, physicists and mathemati­ cians together to exchange ideas about the nervous system and brain, and also to introduce young scientists to the field. The program, attended by more than a hundred scientists, was interdisciplinary both in character and participation. The primary support for the school was provided by the Volkswagen Foundation of West Germany. We are particularly indebted to Drs. G. Gambke, M. -L Zarnitz, and H. Penschuck of the Foundation for their in­ terest in and help with the project. The school also received major support from the International Centre for Theoretical Physics in Trieste and its sponsoring agencies, including the use of its exce...

  16. Retrieval of historical radioactive waste at the Kurchatov Institute Russian Research Centre. Russian Federation. Annex VI

    International Nuclear Information System (INIS)

    2007-01-01

    The Kurchatov Institute Russian Research Centre was established in 1943 for research and development work on nuclear technologies for military and civil applications. During the years of its operation, the Kurchatov Institute accumulated large amounts of solid radioactive waste and spent nuclear fuel at its site. Up until the mid-1960s, solid radioactive waste, including high level radioactive waste, was put in temporary storage at the Kurchatov Institute site. In 1974 these storage facilities were closed, and since then the waste has been moved to MosSIA Radonin in Moscow for treatment, conditioning and storage. The Kurchatov Institute site is now surrounded by a densely populated urban district, and in 1998 the government issued a decree on speeding up the removal of hazardous facilities, initially all old radioactive waste repositories, from the site. At present, all rehabilitation activities at the Kurchatov Institute are conducted under a single rehabilitation project in which other Russian institutes and organizations are involved. The objective of the rehabilitation project is to remove all historical radioactive waste from the existing storage facilities and to clean and rehabilitate the whole site. From late 2002 until mid-2004, seven old repositories out of the ten were emptied and demolished. Activities resulted in the removal of more than 600 m 3 of waste with a total activity of over 3.8 x 1012 Bq. The radiation doses to personnel did not exceed the prescribed levels in the course of these activities. Remediation of the remaining repositories in which waste is immobilized in situ requires additional equipment and new technology development for fragmentation, radiation monitoring and handling of waste with relatively high levels of activity

  17. An Introduction to the Cost of Engineering and Institutional Controls at Brownfield Properties

    Science.gov (United States)

    This fact sheet introduces and explores the costs of site cleanup and, where cleanup leaves site contamination that restricts reuse, outlines the engineering and institutional controls and their monitoring and maintenance costs over a longer time frame.

  18. Progress report on research and development in 1991, Institute of Neutron Physics and Reactor Engineering, KfK

    International Nuclear Information System (INIS)

    1992-03-01

    Progress report on research and development in 1991 Institute of Neutron Physics and Reactor Engineering. The Institute of Neutron Physics and Reactor Engineering is concerned with research work in the field of nuclear engineering related to the safety of fast and thermal reactors as well as with specific problems of fusion reactor technology. Under the project of nuclear safety research, the Institute works on concepts designed to drastically improve reactor safety. Apart from that, methods to estimate and minimize the radiological consequences of reactor accidents are developed. Under the fusion technology project, the Institute deals with neutron physics and technological questions of the breeding blanket. Basic research covers technico-physical questions of the interaction between light ion radiation of a high energy density and matter. In addition and to a small extent, questions of employing hydrogen in the transport area are studied. For all these tasks it is indispensable to use up-to-date data processing methods and equipment, from the highest capacity computer to the integrated minicomputer system. (orig./DG) [de

  19. TTI Phase 2 Institutional Support: Indian Institute of Dalit Studies ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This funding will enhance the Indian Institute of Dalit Studies' (IIDS) role as a credible public policy institution in India by strengthening its ability to provide high-quality, influential, and policy-relevant research. About the Indian Institute of Dalit Studies IIDS is a social sciences research centre with a focus on development ...

  20. TTI Phase 2 Institutional Support: Centre for Budget and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... as a leading think tank that provides research and evidence on public policy and governance issues ... sectors, agriculture and food security, vulnerability, fiscal decentralization, and taxation. ... New Cyber Policy Centres for the Global South.

  1. SSC RIAR is the largest centre of research reactors

    International Nuclear Information System (INIS)

    Kalygin, V.V.

    1997-01-01

    The State Scientific Centre (SSC) ''Research Institute of Atomic Reactors'' (RIAR) is situated 100 km to the south-east from Moscow, in Dimitrovgrad, the Volga Region of the Russian Federation. SSC RIAR is the largest centre of research reactors in Russia. At present there are 5 types of reactor facilities in operation, including two NPP. One of the main tasks the Centre is the investigations on safety increase for power reactors. Broad international connections are available at the Institute. On the basis of the SSC RIAR during 3 years work has been done on the development of the branch training centre (TC) for the training of operation personnel of research and pilot reactors in Russia. (author). 3 tabs

  2. SSC RIAR is the largest centre of research reactors

    Energy Technology Data Exchange (ETDEWEB)

    Kalygin, V V [State Scientific Centre, Research Inst. of Atomic Reactors (Russian Federation)

    1997-10-01

    The State Scientific Centre (SSC) ``Research Institute of Atomic Reactors`` (RIAR) is situated 100 km to the south-east from Moscow, in Dimitrovgrad, the Volga Region of the Russian Federation. SSC RIAR is the largest centre of research reactors in Russia. At present there are 5 types of reactor facilities in operation, including two NPP. One of the main tasks the Centre is the investigations on safety increase for power reactors. Broad international connections are available at the Institute. On the basis of the SSC RIAR during 3 years work has been done on the development of the branch training centre (TC) for the training of operation personnel of research and pilot reactors in Russia. (author). 3 tabs.

  3. TLD environmental monitoring at the Institute of Nuclear Engineering in Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Taam, I.H. [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Caixa Postal 68550, 21945-970 Rio de Janeiro, RJ (Brazil); Rosa, L.A.R. da [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Av. Salvador Allende s/n, Caixa Postal 37760, 22780-160 Rio de Janeiro, RJ (Brazil)], E-mail: lrosa@ird.gov.br; Crispim, V.R. [PEN/COPPE-DNC/POLI/CT/UFRJ, Caixa Postal 68509, 21941-972 Rio de Janeiro, RJ (Brazil)

    2008-09-15

    Since 2003 the Institute of Nuclear Engineering in Rio de Janeiro city, Brazil, operates a new cyclotron, RDS-111, to produce {sup 18}F-Fluorodeoxyglucose to be used in nuclear medicine. Additionally, the IEN radioactive waste repository has been enlarged during the past last years, receiving a considerable amount of radioactive materials. Therefore, it became necessary to evaluate a possible increase of the environmental gamma exposure rates at the institute site due to the operation of the new accelerator and the enlargement of the institute waste repository as well. LiF:Mg,Cu,P, TLD-100H, and TL detectors were employed for environmental kerma rate evaluation and the results were compared with previous results obtained before the RDS-111 operation initialisation and the enlargement of IEN waste repository. No significant contribution for the enhancement of environmental gamma kerma rates was detected.

  4. TTI Phase 2 Institutional Support: Public Affairs Centre | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This funding will enhance the Public Affairs Centre's (PAC) role as a credible ... and networks with national governments and international partners working on ... Birth registration is the basis for advancing gender equality and children's rights.

  5. Relevance of First-Tier, Peer-Reviewed Journals in the Tenure and Promotion Process at Non-Doctoral Granting Engineering Institutions

    Directory of Open Access Journals (Sweden)

    Amanda S. Florio

    2012-02-01

    Full Text Available The IEEE (formerly the Institute of Electrical and Electronics Engineers is the world's largest professional society dedicated to the advancement of technology. While it is indeed growing into multiple technology areas, the IEEE is still first an organization of electrical, electronics, and computer engineering professionals. It has over 400,000 members and publishes nearly 100, first-tier, peer-reviewed journals. As such a large purveyor of scholarly works, engineering faculty at almost all academic institutions (doctoral granting and non-doctoral granting are familiar with the IEEE. For this reason, the IEEE makes an excellent case study for the relevance of first-tier, peer-reviewed journals in the tenure and promotion process at non-doctoral granting engineering institutions. In our work, we surveyed editors of the 97 IEEE journals. 93% of respondents indicated that 10% or less of their submissions were from non-academic institutions. None (0% of the respondents believed that the number of non-doctoral granting institution submissions would be increasing over the next three years. In fact, a majority of the respondents (55% see the number of non-doctoral granting institution submissions decreasing in the same time frame. To correlate this data, we examined a sample of 2,099 articles published in the first issue of each IEEE journal in 2009. 357 (17% of these 2,099 articles were authored by individuals from academic institutions in the United States. Of the 357, only 35 were published by individuals from non-doctoral granting institutions (1.7%, with only 8 (0.38% from institutions where a bachelor degree is the highest offered.

  6. Neighbourhood Centres – Organisation, Management and Finance

    DEFF Research Database (Denmark)

    Larsen, Jacob Norvig

    to identify different financial models and analyse economic sustainability. As regards organisational and management models data were collected through documentary sources and by means of personal interviews and field visits to ten centres. Even within the analysed limited population of centres economic...... public subsidy. Some of the centres have high number of users on a daily basis, whereas others are only rarely used. It is explored how organisation, management and financial set-up differs among the centres. Quantitative data on financial issues and annual accounts of fifteen centres were analysed...... and institutional sustainability varies significantly. In organisational terms centres range from fully-integrated in the municipal administration to independent voluntary managed centres. In terms of financial, or economic, models variation is less pronounced as all centres to some degree are dependent on current...

  7. Analysis of different research activities and description of parties within the Swedish Knowledge Centre for Renewable Transportation Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Lundgren, Joakim [Bio4Energy, Luleaa (Sweden); Wallberg, Ola [Lund Univ., Lund (Sweden)

    2012-07-01

    The Swedish Knowledge Centre for Renewable Transportation Fuels (f3) is a nationwide centre, which through cooperation and a systems approach will contribute to the development of sustainable fossil free fuels for transportation. The centre will, through joint efforts by the centre partners, perform syntheses of current research about the production of renewable fuels as well as supplementing research, such as comparative systems analyses of fuels, processes, raw materials and plant design. f3 provides a platform for collaboration between centre partners, with a common vision of sustainable fuels for transportation and common objectives. The centre partners include Sweden's most active universities and research institutes within the field, as well as a number of highly relevant industrial companies. New fuels will be an important component of a strategy to reduce both greenhouse gas emissions and our dependence on petroleum. The Swedish Government has established a vision for the Swedish transport industry to function without fossil fuels by 2030. Such a development requires a concerted response, with participation from all stake holders. Swedish researchers in various disciplines and at various colleges and institutes have a unique breadth and they are at the forefront in several areas of knowledge appropriate for a centre for renewable fuels. Through collaboration, f3 should help to link engineering and systems research and communicate results and conclusions from these research efforts. Within the f3 centre, several parties with different research activities are represented. This document is a snapshot of the different parties at the end of 2011 where the stake holders are described and their current research is highlighted. Also, the different projects conducted by the parties have been categorized and presented at the end of the document.

  8. 5th National meeting of the SA Institution of Chemical Engineers: chemical engineering in support of industry and society. V. 1-3

    International Nuclear Information System (INIS)

    1988-01-01

    The 5th national meeting of the SA Institution of Chemical Engineering was held from 15-16 August 1988 at Pretoria. The subject scope covered on the meeting include the broad spectrum of work done by the chemical engineer. The main categories include the processing of agricultural products, biotechnology, coal and hydrocarbons, the chemical engineering practice, fluid dynamics, gas treatment, heat and mass transfer, materials of construction, minerals processing, source materials and products, training and education, vapour-liquid equilibrium, and water and effluents. One seminar specifically covers process engineering in the context of nuclear reactors and two other papers cover supported liquid membrane extraction of uranium

  9. System of radiation monitoring of nuclear hazardous facilities in Institute of Atomic Energy of National Nuclear Centre

    International Nuclear Information System (INIS)

    Azarov, V.A.; Meshin, M.M.; Shuklin, G.S.

    1996-01-01

    Issues of radiation monitoring (RM) at reactor complex of Inst. of Atomic Energy (IAE) are discussed in report. The National Nuclear Centre's reactor base consists of 2 complexes situated in 2 different locations: Bajkal-1 and IGR. So far as IAE has common mythology for RM at all hazardous nuclear facilities the issues of RM for Baikal-1 and IGR Radiation monitoring system includes: - personal dosimetric control of personnel, maintaining the reactor systems and research laboratories; RM of industrial buildings; - RM of technical areas of technical area of the facility; sanitary system of dosimetry control (DC); etc. The description of stationary DC system of the complex based on 'System' facility are given. Baikal is surround by sanitary area with radius of 5 km and with its centre in the reactor location. Complexity of studying the radiation status on the territory of Baikal-1 and its surroundings is the result of nuclear testing conducted at the test site in the past, reactor operation with open exhaust of coolant into atmosphere while testing on Nuclear Rocket Engines program as well as global fall out of radionuclides

  10. Radwaste Treatment Centre Jaslovske Bohunice

    International Nuclear Information System (INIS)

    2000-01-01

    In this leaflet the Bohunice Radwaste Treatment Centre (BSC RAO) is presented. BSC RAO is designed to process and treat liquid and solid radwaste, arising from the NPP A-1 decommissioning, from NPPs V-1, V-2, and Mochovce operations, as well as institutional radwaste of diverse institutional (hospitals, research institutes) in the Slovak Republic. Transport, sorting, incineration, compacting, concentration and cementation of radwaste as well as monitoring of emission are described

  11. A Multi-Institution Study of Student Demographics and Outcomes in Chemical Engineering

    Science.gov (United States)

    Lord, Susan M.; Layton, Richard A.; Ohland, Matthew W.; Brawner, Catherine E.; Long, Russell A.

    2014-01-01

    Using a large multi-institutional dataset, we describe demographics and outcomes for students starting in and transferring into chemical engineering (ChE). In this dataset, men outnumber women in ChE except among black students. While ChE starters graduate in ChE at rates comparable to or above their racial/ethnic population average for…

  12. Annual Technical Report - Nuclear Engineering Institute/ Dept. of Physics (IEN/DEFI) 1988

    International Nuclear Information System (INIS)

    Silva, A.G. da; Cabral, S.C.; Osso Junior, J.A.

    1988-01-01

    The researches carried out by physics department of Nuclear Engineering Institute(IEN)/Brazilian CNEN are presented. The researches in nuclear physics, isotope production and irradiation damages using CV-28 cyclotron which accelerates protons, deuterons, helium and alpha particles with maximum energies of 24, 14, 36 and 28 MeV, respectively are described. (M.C.K.)

  13. Foreign Science and Engineering Presence in U.S. Institutions and the Labor Force

    Science.gov (United States)

    2008-07-23

    United States, Washington, DC, May 2005, pp. 17-65. 8 Center for Immigration Studies, Davis, Donald R. and David E. Weinstein , United States Technological...Academy of Sciences, Wm. A. Wulf, President, National Academy of Engineering, and Harvey Fineberg, President, Institute of Medicine, December 13, 2002

  14. Engines without Fuel?--Empirical Findings on Finnish Higher Education Institutions as Education Exporters

    Science.gov (United States)

    Schatz, Monika

    2016-01-01

    In 2010, the Finnish Ministry of Education and Culture formulated Finland's first education export strategy. This policy document attributed Finnish Higher Education Institutions (HEIs) a significant role in the emerging sector by declaring them as "engines" of education export. Situated in a phenomenological approach towards…

  15. Role of the Vinca Institute in nuclear engineering and radiation protection education

    International Nuclear Information System (INIS)

    Pesic, M.

    2002-01-01

    Education programmes in nuclear engineering and radiation protection in former Yugoslavia have been supported by comprehensive research and development and pertinent training of experts and students in the Vinca (former B oris Kidric ) Institute of nuclear sciences and abroad. Two research reactors were constructed and operated in the Vinca Institute since 1958. Adopted law on ban for NPP construction, isolation of the country due to the UN sanctions and weak economical situation deteriorated considerably the nuclear expertise in Serbia after 1989. Nuclear courses at the University were revoked, major research programmes were cancelled, RA research reactor in the Vinca Institute was shut down and many experts left the country. A novel nuclear programme related to remedial of nuclear and radiation safety in the Vinca Institute has been launched in 2003. This paper emphasizes the need for nuclear expertise, the lack of nuclear professionals to carry out the new programme, the experience gained so far and point out a possible future creative role of the Vinca Institute in education of new experts in the country and abroad. (author)

  16. Discussion on 'Centres of excellence' in Africa

    International Nuclear Information System (INIS)

    Riad, S.

    1999-01-01

    In Africa, Centres of Excellence should be oriented to build up scientific and technological capacity in the four topics of international Monitoring System related technologies, namely, seismic monitoring, hydro acoustic monitoring, infrasound monitoring and radionuclides monitoring. Training programs on these topics should be a major objective. A network of such centres should be established in a number of African countries. Centres should be equipped with means and materials for on-line course dispatch to interested training centres or research institutions. African centres should develop strong relationship among themselves through information and data exchange and sharing, harmonization of training programs. National data centres may be established as a component of the African Centre of Excellence. States Signatories may authorize the establishment of a specific fund to support the activities of the African center

  17. African Institute for Mathematical Sciences | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le succès que connaît l'AIMS-NEI a motivé le Department for International Development du Royaume-Uni à engager dans l'initiative une somme équivalant à 29 millions CAD sur cinq ans en 2012. Cette somme, administrée par le CRDI, a servi à l'établissement de trois autres centres et à l'octroi de fonds regroupés aux ...

  18. Development of the institutional framework of interaction with engineering UFD Russian oil and gas complex

    Directory of Open Access Journals (Sweden)

    S. Y. Yurpalov

    2005-03-01

    Full Text Available The trends developing in the Russian market of equipment for the oil and gas industry. The main reasons for the decline in production in the oil and gas engineering. The estimation of the negative trends of decrease in volumes of exploration works, the institutional environment of economic activity. The directions of cooperation of engineering enterprises of the Urals Federal District, serving the energy industry, with consumers. A set of measures to strengthen cooperation with Innovative Energy Engineering at the various levels of state regulation.

  19. New Cyber Policy Centres for the Global South | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    13 avr. 2018 ... The Cyber Policy Centres initiative was established in 2017 to strengthen independent policy research institutions in sub-Saharan Africa, Asia, and Latin America by providing support and mentorship to build research and policy capacity in the key areas of digital rights, cybersecurity, and innovation policy.

  20. Local Government Planning Tool to Calculate Institutional and Engineering Control Costs for Brownfield Properties

    Science.gov (United States)

    This cost calculator is designed as a guide for municipal or local governments to assist in calculating their expected costs of implementing and conducting long-term stewardship of institutional controls and engineering controls at brownfield properties.

  1. Occupational radioprotection program at Nuclear Engineering Institute -IEN: results obtained in 1991

    International Nuclear Information System (INIS)

    Fajardo, P.W.; Pastura, V.F.S.; Soares, M.L.; LeRoy, C.L.; Teixeira, M.V.; Santos, I.H.T.; Pujol Filho, S.V.

    1992-01-01

    The results of occupational radioprotection program at Nuclear Engineering Institute-IEN- in 1991 are presented. The personnel monitoring, the routine monitoring of limited areas, the operational monitoring during the operation and the cyclotron CV-28 maintenance, the radioisotope processing and Argonauta Reactor operation, the control of radioprotection equipment and the control of radiation sources are included. (C.G.C.)

  2. Planning a multi-institutional information for development study centre

    CSIR Research Space (South Africa)

    Moreno, A

    2010-05-01

    Full Text Available . The I4D Study Centre tasks are to increase both the research expertise pool available for Meraka and the partner university, and the joint development of study programs with universities that will prepare students for a researcher career with an ICT4D...

  3. Introducing the PET Centre Prague

    International Nuclear Information System (INIS)

    Belohlavek, O.

    2001-01-01

    The PET Centre Prague (www.homolka.cz/nm) was established in 1999 as the outcome of a joint project of the public Na Homolce Hospital and the Nuclear Research Institute Rez, plc, the Czech radiopharmaceutical producer. Technical and financial assistance was provided by the International Atomic Energy Agency, which perceived the Centre as its model project that could serve as a guide for the development of PET centres in countries sharing a comparable level of development with the Czech Republic. The article maps the history of the project, its design, workplace lay-out and equipment, radiation protection arrangements and spectrum of the first approx. 3000 investigations. (author)

  4. Central Scientific and Research Institute of Nuclear Information as the branch centre of information on nuclear science and engineering

    International Nuclear Information System (INIS)

    Arkhangel'skij, I.A.; Sokolov, D.D.; Kalinin, V.F.; Nikiforov, V.S.

    1982-01-01

    The main tasks are considered in the scope of the Central Scientific-Research Institute for Information and Technological and Economic Studies on Nuclear Science and Technology. (TsNIIAtominform). The institute coordinates scientific research and information activity of information agencies of all the USSR organizations engaged in nuclear science and technology, excercises a centralized completion of their libraries, develops and puts into practice the most progressive methods for the information servicing. The institute is a national INIS center of the USSR. Here a system for the automatic information dissemination has been successfully elaborated and employed. Much of the institute activity is given to the estimation and analysis of information and to the determination of tendencies in the nuclear science and technology development. A conclusion is drawn to the effect that TsNIIAtominform, within 15 years of its existence, has formed as a center ensuring functioning of the system of scientific and technical information on nuclear science and technology

  5. Bhabha Atomic Research Centre: annual report 1988

    International Nuclear Information System (INIS)

    1989-12-01

    The research and development (R and D) work carried out in the Bhabha Atomic Research Centre (BARC), Bombay during 1988 is summarised and presented in the sections entitled Physical Sciences, Chemical Sciences, Materials and Materials Science, Radioisotopes, Reactors, Fuel cycle, Radiological Safety and Protection, Electronics and Instrumentation, Engineering Services, Life Sciences and General. At the end of each section a list of publications is also given. The R and D work of the outstation units of BARC, namely, Nuclear Research Laboratory, Srinagar; High Altitute Research Laboratory, Gulmarg and Variable Energy Cyclotron Centre, Calcutta are also described in this report. Some of the highlights of the work during the year are: (1) Medium Energy Heavy Ion Accelerator (MEHIA) facility set up jointly by BARC and the Tata Institute of Fundamental Research (TIFR) at TIFR premises became fully operational in September 1988. A number of new compositions of high temperature supconducting materials were synthesized. The highest transition temperature achieved was 125 K. Research work to improve the quality of sintered uranium oxide pellets achieved the purpose. Nuclear fuels were fabricated by using sol-gel process. R and D work for 235 MWe and 500 MWe PHWR type reactors is continuing. Conceptual design of the fuel handling system for the prototype fast breeder reactor was finalised. 233 U+Al alloy fuel for Kamini reactor was fabricated. Progress has been made in industrial applications of enzymes. Various applications of radioisotopes are being continued. Certain technologies and processes developed in the Centre were transferred to commercial agencies for large scale exploitation. (M.G.B.)

  6. Integrating Social Sustainability in Engineering Education at the KTH Royal Institute of Technology

    Science.gov (United States)

    Björnberg, Karin Edvardsson; Skogh, Inga-Britt; Strömberg, Emma

    2015-01-01

    Purpose: The purpose of this paper is to investigate what are perceived to be the main challenges associated with the integration of social sustainability into engineering education at the KTH Royal Institute of Technology, Stockholm. Design/methodology/approach: Semi-structured interviews were conducted with programme leaders and teachers from…

  7. Integrating Communication into Engineering Curricula: An Interdisciplinary Approach to Facilitating Transfer at New Mexico Institute of Mining and Technology

    Science.gov (United States)

    Ford, Julie Dyke

    2012-01-01

    This program profile describes a new approach towards integrating communication within Mechanical Engineering curricula. The author, who holds a joint appointment between Technical Communication and Mechanical Engineering at New Mexico Institute of Mining and Technology, has been collaborating with Mechanical Engineering colleagues to establish a…

  8. Training centres - organization and management

    International Nuclear Information System (INIS)

    Kovar, P.

    1986-01-01

    In the lecture 'Training centres - organization and management' some principles and requirements which influence the organization, management and activity pattern of nuclear training centres, are briefly introduced. It is demonstrated, step by step, how these general principles are implemented in the development of the Czechoslovak nuclear power programme, it means, how the training of the NPP personnel proceeds in Czechoslovak nuclear training centres. General principles which are selected: a connection between the capacity of the training centre and the scope and needs of the nuclear power programme, a position of the training center within the institutional set-up, a structure and organization of the training system which complies with the system of NPP construction, reflect the pattern and the activity of the nuclear training centre and nuclear power technical level, a research group of workers in the nuclear training centre, main tasks and technical facilities, management of the training process and a transfer of knowledge and research results into the training process. The lecture is supplemented by pictures and slides. (orig.)

  9. Ankara Historic City Centre Restoration Site Conservation Plan, its Characteristics, and Rationales for its Revocation

    Directory of Open Access Journals (Sweden)

    Mehmet Tuncer

    2013-12-01

    Full Text Available This is a comprehensive evaluation of the 1: 5000 Ankara Historic City Centre Restoration Site Conservation Master Development Plan and the 1: 1000 Conservation Implementation Plans, which have become a matter of litigation against the Ankara Metropolitan Municipality, filed by various non-governmental organizations, universities, the Union of Chambers of Turkish Architects and Engineers (TMMOB and public institutions; in terms of the environment, transportation and traffic as regards the entirety of the planned location, and the integrity of the plan, based on conservation-reclamation planning essentials and public interest. Thus the Ulus Ankara Historic City Centre Restoration Site Conservation Master Development and Implementation Plan and Plan Notes as ratified by the Ankara Metropolitan Municipality and Conservation Board, are examined in this context in terms of restoration site, protected site, conservation site, interaction and transition sites and historic and cultural properties.

  10. The first Summer Institute of the World Nuclear University - a personal record

    International Nuclear Information System (INIS)

    Denk, W.; Fischer, C.; Seidl, M.

    2005-01-01

    The first World Nuclear University Summer Institute was held at Idaho Falls, USA, between July 9 and August 20, 2005. The event was hosted by the Institute of Nuclear Science and Engineering of Idaho State University (ISU) and by the Idaho National Laboratory (INL), which has been planned to be the central nuclear technology research institution in the United States. The World Nuclear University (WNU) was founded in 2003 by the International Atomic Energy Agency (IAEA), the OECD Nuclear Energy Agency (OECD-NEA), the World Association of Nuclear Operators (WANO), and the World Nuclear Association (WNA) as a global association fo scientific and educational institutions in the nuclear field. The first WNU Summer Institute was designed at IAEA in Vienna in the course of the following year and planned by the WNU Coordinating Centre in London. The six weeks of lectures and presentations arranged by the World nuclear University in Idaho Falls are described in detail from the participants' perspective. (orig.)

  11. Implementing Responsibility Centre Budgeting

    Science.gov (United States)

    Vonasek, Joseph

    2011-01-01

    Recently, institutes of higher education (universities) have shown a renewed interest in organisational structures and operating methodologies that generate productivity and innovation; responsibility centre budgeting (RCB) is one such process. This paper describes the underlying principles constituting RCB, its origin and structural elements, and…

  12. Unravelling Tacit Knowledge : Engagement Strategies of Centres for Excellence in Teaching and Learning

    NARCIS (Netherlands)

    Kottmann, Andrea; Deem, Rosemary; Eggins, Heather

    2017-01-01

    In the recent years at higher education institutions in Europe the establishment of Centres for Excellence in Teaching and Learning (CETL) has become widespread. Mostly institutions use these centres to implement and coordinate activities improving the quality of teaching and learning, new teaching

  13. MO-DE-BRA-03: The Ottawa Medical Physics Institute (OMPI): A Practical Model for Academic Program Collaboration in a Multi-Centre City

    Energy Technology Data Exchange (ETDEWEB)

    McEwen, M [National Research Council Canada, Ottawa, ON (Canada); Rogers, D [Carleton University, Ottawa, ON (Canada); Johns, P

    2016-06-15

    Purpose: To build a world-class medical physics educational program that capitalizes on expertise distributed over several clinical, government, and academic centres. Few if any of these centres would have the critical mass to solely resource a program. Methods: In order to enable an academic program, stakeholders from five institutions made a proposal to Carleton University for a) a research network with defined membership requirements and a process for accepting new members, and b) a graduate specialization (MSc and PhD) in medical physics. Both proposals were accepted and the program has grown steadily. Our courses are taught by medical physicists from across the collaboration. Our students have access to physicists in: clinical radiotherapy (the Ottawa Cancer Centre treats 4500 new patients/y), radiology, cardiology and nuclear medicine, Canada’s primary standards dosimetry laboratory, radiobiology, and university-based medical physics research. Our graduate courses emphasize the foundational physics plus applied aspects of imaging, radiotherapy, and radiobiology. Active researchers in the city-wide volunteer-run network are appointed as adjunct professors by Physics, giving them access to national funding competitions and partial student funding through teaching assistantships while opening up facilities in their institutions for student thesis research. Results: The medical physics network has grown to ∼40 members from eight institutions and includes five full-time faculty in Physics and 17 adjunct research professors. The graduate student population is ∼20. Our graduates have proceeded to a spectrum of careers. Our alumni list includes a CCPM Past-President, the current COMP President, many clinical physicists, and the heads of at least three major clinical medical physics departments. Our PhD was Ontario’s first CAMPEP-accredited program. Conclusion: A self-governing volunteer network is the foundational element that enables an MSc/PhD medical

  14. MO-DE-BRA-03: The Ottawa Medical Physics Institute (OMPI): A Practical Model for Academic Program Collaboration in a Multi-Centre City

    International Nuclear Information System (INIS)

    McEwen, M; Rogers, D; Johns, P

    2016-01-01

    Purpose: To build a world-class medical physics educational program that capitalizes on expertise distributed over several clinical, government, and academic centres. Few if any of these centres would have the critical mass to solely resource a program. Methods: In order to enable an academic program, stakeholders from five institutions made a proposal to Carleton University for a) a research network with defined membership requirements and a process for accepting new members, and b) a graduate specialization (MSc and PhD) in medical physics. Both proposals were accepted and the program has grown steadily. Our courses are taught by medical physicists from across the collaboration. Our students have access to physicists in: clinical radiotherapy (the Ottawa Cancer Centre treats 4500 new patients/y), radiology, cardiology and nuclear medicine, Canada’s primary standards dosimetry laboratory, radiobiology, and university-based medical physics research. Our graduate courses emphasize the foundational physics plus applied aspects of imaging, radiotherapy, and radiobiology. Active researchers in the city-wide volunteer-run network are appointed as adjunct professors by Physics, giving them access to national funding competitions and partial student funding through teaching assistantships while opening up facilities in their institutions for student thesis research. Results: The medical physics network has grown to ∼40 members from eight institutions and includes five full-time faculty in Physics and 17 adjunct research professors. The graduate student population is ∼20. Our graduates have proceeded to a spectrum of careers. Our alumni list includes a CCPM Past-President, the current COMP President, many clinical physicists, and the heads of at least three major clinical medical physics departments. Our PhD was Ontario’s first CAMPEP-accredited program. Conclusion: A self-governing volunteer network is the foundational element that enables an MSc/PhD medical

  15. Marketing, Management and Performance: Multilingualism as Commodity in a Tourism Call Centre

    Science.gov (United States)

    Duchene, Alexandre

    2009-01-01

    This paper focuses on the ways an institution of the new economy--a tourism call centre in Switzerland--markets, manages and performs multilingual services. In particular, it explores the ways multilingualism operates as a strategic and managerial tool within tourism call centres and how the institutional regulation of language practices…

  16. Medical applications of accelerators at Tata Memorial Centre

    International Nuclear Information System (INIS)

    Dinshaw, K.A.

    2003-01-01

    The Tata Memorial Centre constitutes the national comprehensive cancer centre for the prevention, diagnosis, treatment and research on cancer. It is well equipped with sophisticated state-of-the-art equipment capable of delivering External Beam Radiotherapy (Ebert) and Brachytherapy. Nearly 400 patients receive Ebert daily at the institute from a team of highly skilled and dedicated radiation oncologists, medical physicists and technologists, making it one of the busiest centres in the country

  17. Understanding One Institutions' Process in Preparing Civil Engineering Students to Be Globally Competent

    Science.gov (United States)

    Mavroudhis, Vasiliki Goudanas

    2017-01-01

    Civil engineering is an increasingly dynamic and global industry experiencing expansion cross borders, resulting in new required competencies sought out by employers and reflected in updated undergraduate program outcomes. These new competencies include attributes that result in global competence. Institutions of higher learning need to…

  18. The DEMETER Science Mission Centre

    Czech Academy of Sciences Publication Activity Database

    Lagoutte, D.; Brochot, J.; Y.; de Carvalho, D.; Elie, F.; Harivelo, F.; Hobara, Y.; Madrias, L.; Parrot, M.; Pincon, J. L.; Berthelier, J. J.; Peschard, D.; Seran, E.; Gangloff, M.; Sauvaud, J. A.; Lebreton, J. P.; Štverák, Štěpán; Trávníček, Pavel M.; Grygorczuk, J.; Slominski, J.; Wronowski, R.; Barbier, S.; Bernard, P.; Gaboriaud, A.; Wallut, J. M.

    2006-01-01

    Roč. 54, č. 5 (2006), s. 428-440 ISSN 0032-0633 Institutional research plan: CEZ:AV0Z30420517 Keywords : Mission Centre * Data processing Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 1.509, year: 2006

  19. Investigation of the current requirements engineering practices among software developers at the Universiti Utara Malaysia Information Technology (UUMIT) centre

    Science.gov (United States)

    Hussain, Azham; Mkpojiogu, Emmanuel O. C.; Abdullah, Inam

    2016-08-01

    Requirements Engineering (RE) is a systemic and integrated process of eliciting, elaborating, negotiating, validating and managing of the requirements of a system in a software development project. UUM has been supported by various systems developed and maintained by the UUM Information Technology (UUMIT) Centre. The aim of this study was to assess the current requirements engineering practices at UUMIT. The main problem that prompted this research is the lack of studies that support software development activities at the UUMIT. The study is geared at helping UUMIT produce quality but time and cost saving software products by implementing cutting edge and state of the art requirements engineering practices. Also, the study contributes to UUM by identifying the activities needed for software development so that the management will be able to allocate budget to provide adequate and precise training for the software developers. Three variables were investigated: Requirement Description, Requirements Development (comprising: Requirements Elicitation, Requirements Analysis and Negotiation, Requirements Validation), and Requirement Management. The results from the study showed that the current practice of requirement engineering in UUMIT is encouraging, but still need further development and improvement because a few RE practices were seldom practiced.

  20. The structure and dynamics of health centres in the Netherlands: an institutional analysis.

    NARCIS (Netherlands)

    Batenburg, R.; Eyck, A.

    2011-01-01

    Context: Health centres are seen as a preferred organization of the modernized and integrated primary care. they are expected to facilitate an accessible contact point for medical care as close to people’s homes. Also, health centres are expected to deliver care in an efficient and effective way,

  1. Nuclear research centres in Pakistan: Status and prospects

    International Nuclear Information System (INIS)

    Akhtar, K.M.; Khan, H.A.

    2001-01-01

    Nuclear research centres (NRCs) played an important role in the introduction of nuclear techniques in their respective countries. These centres are now faced with changes in public and government attitudes, pressures from anti-nuclear groups, competition from non-nuclear technologies, budget cuts and privatization, etc. These NRCs are still making useful contribution in the field of science and technology but need to change their strategy to operate under these pressures. The Pakistan Institute of Nuclear Science and Technology (PINSTECH) has a record of 34 years of successful operation. Salient features and achievements of this Institute are presented as a model for a research centre in a developing country. The elements that are contributed for the success are described. The IAEA and other cooperative agencies can help to overcome the negative factors posed to these NRCs. (author)

  2. A New Paradigm of Engineering Education for the 21st Century:Perspectives of Rose-Hulman Institute of Technology

    Science.gov (United States)

    Western, Arthur; Stamper, Richard

    Strategic initiatives for engineering education in the next decade as planned by the Rose-Hulman Institute of Technology are presented. The Rose-Hulman Institute of Technology is a private college in the United States that specializes in undergraduate engineering, mathematics and science education. The initiatives are in response to broad changes in the practice of the engineering profession in its modern global context. The initiatives comprise five strategic thrust areas and five programmatic themes. The thrust areas are: Energy and Environment; Health and Safety; Transportation; Materials; and Information, Computation, and Communication. The programmatic themes are: Excellence in Education; International Awareness; Business Awareness;Service Learning; and Life-long Learning. The objective of these initiatives is to prepare students to meet the challenges of the 21st century and to serve as leaders in society.

  3. TTI Phase 2 Institutional Support: Centre for Policy Dialogue | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    CPD's research agenda covers a wide variety of areas, including macroeconomic analysis, agricultural and rural development, trade, investment promotion, and climate change. It receives its funding ... For CPD, this project will help enhance its research quality, organizational performance, and policy engagement. Centre of ...

  4. Africa Centre for Systematic Reviews and Knowledge Translation ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Africa Centre for Systematic Reviews and Knowledge Translation ... It will also establish greater self-reliance for evidence synthesis and knowledge translation to bridge the gaps between research and health policy. ... Institution. Makerere University. Pays d' institution. Uganda. Site internet. http://www.makerere.ac.ug ...

  5. Design and Implementation of a Virtual Calculation Centre (VCC for Engineering Students

    Directory of Open Access Journals (Sweden)

    Alaeddine Mokri

    2010-02-01

    Full Text Available Most of the academic institutions in all over the world provide their attendees with databases where courses and other materials could be uploaded, downloaded and checked by the faculty and students. Those materials are mostly PDF files, MS Word files, MS power point presentations or downloadable computer programs. Even though those databases are very beneficial, they need to be improved to meet the students’ needs, especially in engineering faculties where students may need thermo-physical properties of some substances, charts, diagrams, conversion factors and so forth. In addition, many students see it cumbersome downloading and installing a computer program that they do not need often in their studies. As an attempt to satisfy the academic community needs in the faculty of Engineering in Abou Bekr Belkaid University (Tlemcen, Algeria, we had to devise some Web technologies and techniques to design an interactive virtual space wherein many engineering-related Web applications are accessible on-line. Students and professors can access on-line to properties of many substances, convert physical quantities from and into a variety of units, exploit computer programs on-line without installing them, generate tables and charts, and also, they can use diagrams on-line by means of the mouse. The set of those applications is called a Virtual Calculation Center. This paper goes through the different services that could be implemented in a Virtual Calculation Center, and describes the techniques and technologies used to build those applications.

  6. Engineering and Statistical Research Institute contract reports to May, 1983

    Energy Technology Data Exchange (ETDEWEB)

    Thuns, A; Morrison, B A

    1983-06-01

    The purpose of this publication is to provide information on certain Canadian agricultural research contracts which are completed, published and available for loan. These contracts reports are documentation of research contracted out to non-federal government agencies, universities or individuals. Reports on contracts under the control of the Engineering and Statistical Research Institute are written by the contractor, and are reviewed by the scientific authority. Some reports date back to 1973, when the initial contracting program began. The first program was called DREAM (Development, Research, and Evaluation in Agricultural Mechanization). In 1977-78, projects under the Energy in Agriculture program were added. This was the beginning of the AERD (Agricultural Enginering Research and Development) program. In 1981, energy research had expanded and came under a separate progam called ERDAF (Energy Research and Development in Agriculture and Food). The remaining contract work stayed with the AERD program. This publication lists only contracts completed having final reports, and available contract reports with separate listings sorted by contract file number, title, author or subject.

  7. Results in Developing an Engineering Degree Program in Safeguards and Security of Nuclear Materials at Moscow Engineering Physics Institute

    International Nuclear Information System (INIS)

    Kryuchkov, Eduard F.; Geraskin, Nikolay I.; Killinger, Mark H.; Goodey, Kent O.; Butler, Gilbert W.; Duncan, Cristen L.

    2007-01-01

    The world's first master's degree program in nuclear safeguards and security, established at Moscow Engineering Physics Institute (MEPhI), has now graduated nine classes of students. Most of the graduates have gone on to work at government agencies, research organizations, or obtain their PhD. In order to meet the demand for safeguards and security specialists at nuclear facilities, MEPhI established a 5-1/2 year engineering degree program that provides more hands-on training desired by facilities. In February 2004, the first students began their studies in the new discipline Nuclear Material Safeguards and Nonproliferation. This class, as well as other subsequent classes, included students who started the program in their third year of studies, as the first 2-1/2 years consists of general engineering curriculum. Fourteen students made up the first graduating class, receiving their engineering degrees in February 2007. The topics addressed in this paper include specific features of the program caused by peculiarities of Russian education legislation and government quality control of academic education. This paper summarizes the main joint actions undertaken by MEPhI and the US National Laboratories in conjunction with the U.S. Department of Energy, to develop the engineering degree program. Also discussed are the program's specific training requirements, student internships, and job placement. The paper concludes with recommendations from a recent international seminar on nonproliferation education and training

  8. NASA LWS Institute GIC Working Group: GIC science, engineering and applications readiness

    Science.gov (United States)

    Pulkkinen, A. A.; Thomson, A. W. P.; Bernabeu, E.

    2016-12-01

    In recognition of the rapidly growing interest on the topic, this paper is based on the findings of the very first NASA Living With a Star (LWS) Institute Working Group that was specifically targeting the GIC issue. The new LWS Institutes program element was launched 2014 and the concept is built around small working group style meetings that focus on well defined problems that demand intense, direct interactions between colleagues in neighboring disciplines to facilitate the development of a deeper understanding of the variety of processes that link the solar activity to Earth's environment. The LWS Institute Geomagnetically Induced Currents (GIC) Working Group (WG) led by A. Pulkkinen (NASA GSFC) and co-led by E. Bernabeu (PJM) and A. Thomson (BGS) was selected competitively as the pilot activity for the new LWS element. The GIC WG was tasked to 1) identify, advance, and address the open scientific and engineering questions pertaining to GIC, 2) advance predictive modeling of GIC, 3) advocate and act as a catalyst to identify resources for addressing the multidisciplinary topic of GIC. In this paper, we target the goal 1) of the GIC WG. More specifically, the goal of this paper is to review the current status and future challenges pertaining to science, engineering and applications of the GIC problem. Science is understood here as the basic space and Earth sciences research that allow improved understanding and physics-based modeling of physical processes behind GIC. Engineering in turn is understood here as the "impact" aspect of GIC. The impact includes any physical effects GIC may have on the performance of the manmade infrastructure. Applications is understood as the models, tools and activities that can provide actionable information to entities such as power systems operators for mitigating the effects of GIC and government for managing any potential consequences from GIC impact to critical infrastructure. In this sense, applications can be considered as

  9. Addiction research centres and the nurturing of creativity: National Drug Dependence Treatment Centre, India--a profile.

    Science.gov (United States)

    Ray, Rajat; Dhawan, Anju; Chopra, Anita

    2013-10-01

    The National Drug Dependence Treatment Centre (NDDTC) is a part of the All India Institute of Medical Sciences, a premier autonomous medical university in India. This article provides an account of its origin and its contribution to the field of substance use disorder at the national and international levels. Since its establishment, the NDDTC has played a major role in the development of various replicable models of care, the training of post-graduate students of psychiatry, research, policy development and planning. An assessment of the magnitude of drug abuse in India began in the early 1990s and this was followed by a National Survey on Extent, Patterns and Trends of Drug Abuse in 2004. Several models of clinical care have been developed for population subgroups in diverse settings. The centre played an important role in producing data and resource material which helped to scale up opioid substitution treatment in India. A nationwide database on the profile of patients seeking treatment (Drug Abuse Monitoring System) at government drug treatment centres has also been created. The centre has provided valuable inputs for the Government of India's programme planning. Besides clinical studies, research has also focused on pre-clinical studies. Capacity-building is an important priority, with training curricula and resource material being developed for doctors and paramedical staff. Many of these training programmes are conducted in collaboration with other institutions in the country. The NDDTC has received funding from several national and international organizations for research and scientific meetings, and, most recently (2012), it has been designated as a World Health Organization Collaborating Centre on Substance Abuse. © 2012 The Authors, Addiction © 2012 Society for the Study of Addiction.

  10. A Blueprint for Success: A Model for Developing Engineering Education in the UK

    Directory of Open Access Journals (Sweden)

    Melanie Rose Nova King

    2014-03-01

    Full Text Available This paper details the emergence and development of the ‘Centre for Engineering and Design Education’ (CEDE at Loughborough University, UK, and provides a blueprint for success. With ample evidence that such a Centre can prove to be a highly effective support mechanism for discipline-specific academics and can develop and maintain valuable national and international networks and collaborations along with considerable esteem for the host university. The CEDE is unique in the UK and has achieved considerable success and recognition within the local engineering education community and beyond for the past 16 years. Here we discuss the historical background of the Centre’s development, the context in which it operates, and its effective management and operation strategy. The success it has enjoyed is described through examples, with much evidence of the generation of a significant amount of external funding; the development of high quality learning spaces; learning technology systems, open source software and improvements in curriculum design; a strong record of research and publication on the pedagogy of engineering; strong links with industry and employers; and a wealth of connections and know-how built up over the years. This paper provides the institutions with a model blueprint for success in developing engineering education.

  11. Canadian institute honours Hawking

    Science.gov (United States)

    Durrani, Matin

    2009-11-01

    The Perimeter Institute for Theoretical Physics in Waterloo, Canada, has announced that a major new extension to its campus will be known as the Stephen Hawking Centre. The extension, which is currently being built, is due to open in 2011 and will double the size of the institute. It will also provide a home for the institute's Masters students, the first of whom joined the Perimeter Institute this autumn as part of its Perimeter Scholars international programme.

  12. Progress Report. Institute of Atomic Physics, Institute of Physics and Nuclear Engineering, Department of Heavy Ion Physics. 1992-1993

    International Nuclear Information System (INIS)

    Grama, C.; Ionescu-Bujor, M.; Poenaru, D.; Pop, A.

    1994-01-01

    A brief account of the research and development activities carried out in the Department of Heavy Ion Physics, Institute of Atomic Physics, Institute of Physics and Nuclear Engineering, Bucharest, during the period January 1992 to December 1993 is presented. The main topics concern nuclear structure models and methods, heavy-ion-induced reactions, and general properties of nuclei and nuclear energy levels. Also, works dealing with particle detection, measuring instruments and methods are reported. The report contains two sections. The first covers the research in progress in the fields of nuclear structure, nuclear reactions, atomic physics, accelerator, instrumentation, methods and computer codes. The second one, the appendix, contains the list of publications of the Department staff in journals and proceedings, books, and preprints, the conference contributions, the academic degrees awarded, the scientific exchanges, and the list of scientific personnel

  13. How robots challenge institutional practices

    DEFF Research Database (Denmark)

    Hasse, Cathrine

    2018-01-01

    to perceive it in relation their own activity settings and local institutional practices. In this article, I draw on a recent study of the introduction of a robot helper into the activity setting of a Danish rehabilitation centre to examine this split and to identify the processes by which material artefacts...... of the centre. The analyses of the processes in play during attempts at accommodating and then rejecting the robot were informed by Hedegaard's seminal framing of the relationships between activity settings with their histories and motives and the institutional practices within which they are located. The study...

  14. Atomic energy training centres in Latin America. Report of IAEA Mission

    International Nuclear Information System (INIS)

    1959-01-01

    In January 1958, the Brazilian representative on the Board of Governors of the International Atomic Energy Agency - supported by the Governors from Argentina and Guatemala - proposed that a study should be made of the possibility of setting up one or more atomic energy training centres in Latin America. Countries now having facilities that could be used for co-operative training are Argentina, where rapid strides are being made in building up an integrated atomic energy centre in the Buenos Aires; Brazil, which has successfully established a physical science nuclear laboratory and a radio-biology centre; Venezuela, with a medico-biological centre from which much may be expected; and Mexico, where nuclear science courses are to be provided by the University of Mexico. The report discusses two alternatives for the establishment of training centres: 'specialized centres' or 'integrated centres' and concludes that the integrated centre is the preferable one however specialized centres stand a much higher chance of being staffed successfully. They are inherently smaller and consequently costs for facilities and equipment are much less. In addition use might be made of existing facilities. It is stated that one of the specialized atomic energy training centres to be established might well be in the field of radio-botany. Agriculture is a major source of income throughout Latin America. There are many agricultural schools and experimental stations throughout the region and also the Inter-American Institute of Agricultural Science at Turrialba, Costa Rica. The authors of the report concluded that a training centre in radio-botany should provide vitally needed knowledge and vitally needed specialists to all the agricultural installations in Latin America. The report recommends that (1) the Agency should meet the requests of Latin American universities by, for example, supplying equipment and sending experts; (2) at least one specialized training centre should be established

  15. Atomic energy training centres in Latin America. Report of IAEA Mission

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1959-01-15

    In January 1958, the Brazilian representative on the Board of Governors of the International Atomic Energy Agency - supported by the Governors from Argentina and Guatemala - proposed that a study should be made of the possibility of setting up one or more atomic energy training centres in Latin America. Countries now having facilities that could be used for co-operative training are Argentina, where rapid strides are being made in building up an integrated atomic energy centre in the Buenos Aires; Brazil, which has successfully established a physical science nuclear laboratory and a radio-biology centre; Venezuela, with a medico-biological centre from which much may be expected; and Mexico, where nuclear science courses are to be provided by the University of Mexico. The report discusses two alternatives for the establishment of training centres: 'specialized centres' or 'integrated centres' and concludes that the integrated centre is the preferable one however specialized centres stand a much higher chance of being staffed successfully. They are inherently smaller and consequently costs for facilities and equipment are much less. In addition use might be made of existing facilities. It is stated that one of the specialized atomic energy training centres to be established might well be in the field of radio-botany. Agriculture is a major source of income throughout Latin America. There are many agricultural schools and experimental stations throughout the region and also the Inter-American Institute of Agricultural Science at Turrialba, Costa Rica. The authors of the report concluded that a training centre in radio-botany should provide vitally needed knowledge and vitally needed specialists to all the agricultural installations in Latin America. The report recommends that (1) the Agency should meet the requests of Latin American universities by, for example, supplying equipment and sending experts; (2) at least one specialized training centre should be established

  16. The Role of Learner-Centred Assessment in Postsecondary Organisational Change

    Science.gov (United States)

    Webber, Karen L.; Tschepikow, Kyle

    2013-01-01

    For postsecondary institutions, organisational change is an inevitable and ongoing process. Institutions face a growing need to assess student learning assessment as part of an institution's comprehensive assessment plan. While a growing body of literature suggests that learner-centred assessment is a best practice in higher education pedagogy, it…

  17. Aspects of Structure and Dynamics at a Refugee Centre in Denmark

    DEFF Research Database (Denmark)

    Mackrill, Thomas Edward

    1996-01-01

    This article presents an empirical analysis that is part of a practice research project carried out at a Danish Red Cross refugee centre in Copenhagen. It focuses on the relation between the individual refugee and the receiving institution. It points out how the organizational structure...... of a particular refugee centre enables discord between refugees and centre workers as well as among the centre staff. It analyses some of the dynamics of the conflicts that are facilitated by the structure...

  18. Institutional Support : Institute of Statistical, Social and Economic ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The Institute of Statistical, Social and Economic Research (ISSER) established in 1969 is a semi-autonomous university-based research centre located at the University of Ghana, Legon, Accra. ISSER has a strong track record of undertaking high-quality policy-relevant research. This grant - the largest being awarded under ...

  19. 23rd June 2010 - University of Bristol Head of the Aerospace Engineering Department and Professor of Aerospace Dynamics N. Lieven visiting CERN control centre with Beams Department Head P. Collier, visiting the LHC superconducting magnet test hall with R. Veness and CMS control centre with Collaboration Spokesperson G. Tonelli and CMS User J. Goldstein.

    CERN Multimedia

    Jean-Claude Gadmer

    2010-01-01

    23rd June 2010 - University of Bristol Head of the Aerospace Engineering Department and Professor of Aerospace Dynamics N. Lieven visiting CERN control centre with Beams Department Head P. Collier, visiting the LHC superconducting magnet test hall with R. Veness and CMS control centre with Collaboration Spokesperson G. Tonelli and CMS User J. Goldstein.

  20. Academic Design Of Canada's Energy Systems And Nuclear Science Research Centre

    International Nuclear Information System (INIS)

    Bereznai, G.; Perera, S.

    2010-01-01

    The University of Ontario Institute of Technology (UOIT) is at the forefront of alternative energy and nuclear research that focuses on the energy challenges that are faced by the province of Ontario, the industrial heartland of Canada. While the university was established as recently as 2002 and opened its doors to its first students in 2003, it has already developed a comprehensive set of undergraduate and graduate programs, and a reputation for research intensiveness. UOIT offers dedicated programs in nuclear engineering and energy systems engineering to ensure a continued supply of trained employees in these fields. The ability to provide talented and skilled personnel to the energy sector has emerged as a critical requirement of ensuring Ontario's energy future, and to meet this need UOIT requires additional teaching and research space in order to offer its energy related programs. The Governments of Canada and of the Province of Ontario recognized UOIT's achievements and contributions to post-secondary education in the field of clean energy in general and nuclear power in particular, and as part of the economic stimuli funded by both levels of government, approved $45 M CAD for the construction of a 10,000 m 2 'Energy Systems and Nuclear Science Research Centre' at UOIT. The building is scheduled to be ready for occupancy in the summer of 2011. The paper presents the key considerations that lead to the design of the building, and gives details of the education and research programs that were the key in determining the design and layout of the research centre. (authors)

  1. Karlsruhe Nuclear Research Center, Institute of Neutron Physics and Reactor Engineering. Progress report on research and development work in 1993

    International Nuclear Information System (INIS)

    1994-03-01

    The Institute of Neutron Physics and Reactor Engineering is concerned with research work in the field of nuclear engineering related to the safety of thermal reactors as well as with specific problems of fusion reactor technology. Under the project of nuclear safety research, the Institute works on concepts designed to drastically improve reactor safety. Apart from that, methods to estimate and minimize the radiological consequences of reactor accidents are developed. Under the fusion technology project, the Institute deals with neutron physics and technological questions of the breeding blanket. Basic research covers technico-physical questions of the interaction between light ion radiation of a high energy density and matter. In addition and to a small extent, questions of employing hydrogen in the transport area are studied. (orig.) [de

  2. The Centres for Environment-friendly Energy Research (FME)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    High expectations for Norway's Centres for Environment-friendly Energy Research (FME).The FME centres address a broad range of areas, allcentral to developing the energy sector of the future. The activities of the eight centres established in 2009 focus on renewable energy, raising energy efficiency, energy planning, and carbon capture and storage (CCS). In 2011 three new FME centres were established which focus on social science-related energy research. The FME scheme is a direct follow-up of the broad-based political agreement on climate policy achieved in the Storting in January 2008, and of the national RandD Energi21 strategy submitted in February 2008 to the Ministry of Petroleum and Energy. In April 2008 the Research Council of Norway's Executive Board decided to launch a process to establish centres for environment-friendly energy research, and a funding announcement was issued that same year. In 2010 it was decided that additional FME centres would be established in the field of social science-related energy research. After a thorough assessment of each project (based on feasibility, scientific merit, potential to generate value creation and innovation, and composition of the consortium) eight applicants were selected to become FME centres in February 2009. A new call for proposals was issued in 2010, and three more centres were awarded FME status in February 2011. The objective of the FME scheme is to establish time-limited research centres which conduct concentrated, focused and long-term research of high international calibre in order to solve specific challenges in the energy sphere. The selected centres must exhibit higher goals, a longer-term perspective and a more concentrated focus than is required under other funding instruments for the same scientific area. The make-up of the centres is critical to achieving this objective. The centres bring together Norway's leading research institutions and key players in private enterprise, the

  3. BrisSynBio: a BBSRC/EPSRC-funded Synthetic Biology Research Centre.

    Science.gov (United States)

    Sedgley, Kathleen R; Race, Paul R; Woolfson, Derek N

    2016-06-15

    BrisSynBio is the Bristol-based Biotechnology and Biological Sciences Research Council (BBSRC)/Engineering and Physical Sciences Research Council (EPSRC)-funded Synthetic Biology Research Centre. It is one of six such Centres in the U.K. BrisSynBio's emphasis is on rational and predictive bimolecular modelling, design and engineering in the context of synthetic biology. It trains the next generation of synthetic biologists in these approaches, to facilitate translation of fundamental synthetic biology research to industry and the clinic, and to do this within an innovative and responsible research framework. © 2016 The Author(s).

  4. The experience of CDTN/CNEN, Centro de Desenvolvimento da Tecnologia Nuclear: A medium size nuclear research centre in Brazil

    International Nuclear Information System (INIS)

    Sobrinho, P.

    2001-01-01

    At first a university research centre, then a captive research centre of the state owned company in charge of establishing a nuclear industry in Brazil, then a research centre of CNEN (the Brazilian Nuclear Energy Authority), nearing its 50 th anniversary, CDTN has a rich experience. even keeping the project portfolio around a number of traditional nuclear energy areas such as nuclear reactors, materials, environment, process engineering, waste management, radiological protection, the institution experienced an evolution in the substance of the proposed projects. This evolution represents the different institutional insertions, but the major changes occurred at a time when, due to a lesser demand from the nuclear sector and other factors, the explicit idea of producing outputs for the benefit of society received a large acceptance from the employees. The challenges to the institution at this time are commented upon. Retirements, coupled to the lack of job openings, work together for the decrease in the staff number, one major challenge. Up to a certain point, private companies have been hired to fill some of the organisational needs, but it is felt that a limit to this policy is being reached. It is argued that, even in the absence of a strong demand from the energy generation sector, a number of opportunities are still available to a NRC in a developing country. Maturity of nuclear energy and applications of radiation tend to transfer the focus of the activities from the fundamentals of nuclear science and technology to quality related issues, a requirement of the modern times. quality systems cannot substitute for the in depth knowledge of the fundamentals. (author)

  5. Cultural Artefact, Ideology Export or Soft Power? Confucius Institute in Peru

    Science.gov (United States)

    Park, Jae

    2013-01-01

    This paper presents a critical analysis of the transnational interplay of cultural, educational and economic forces that culminated with the establishment of a Chinese language and cultural centre in Peru, the Confucius Institute. Confucius Institutes are government-sponsored cultural centres devoted mainly to Chinese language education around the…

  6. Inequality confirmed: institutional exclusion in the interaction between job-centre advisors and unemployed young people

    Directory of Open Access Journals (Sweden)

    Ulla Rantakeisu

    2015-09-01

    Full Text Available Since the 1990s, the pressures on the unemployed have intensified in Sweden owing to increasing demands on individuals to be employable. This article centres on unemployed youths’ experiences of their visits to the public employment services in four Swedish municipalities and how these experiences can be understood against the background of the intersection of social class and gender. A total of 18 unemployed youths were interviewed and their reasoning was compared with their respective employment-agency officers. The analysis shows that the employment agency gives priority to young working-class men over young working-class women and to middle-class youths over working-class youths, respectively. Young working-class women’s wish to combine employment with caregiving is seen as an encumbrance by the employment agency and these women expressed the harshest criticism against the employment agency. When the advisors meet youths who do not correspond with the current expectations and ideals of the labour market, they risk taking part in an institutional process of exclusion of these youngsters.

  7. Fuel cycle centres

    International Nuclear Information System (INIS)

    Hagen, M.

    1977-01-01

    The concept of co-locating and integrating fuel cycle facilities at one site is discussed. This concept offers considerable advantages, especially in minimizing the amount of radioactive material to be transported on public roads. Safeguards and physical protection as relating to such an integrated system of facilities are analysed in detail, also industrial and commercial questions. An overall risk-benefit evaluation turns out to be in favour of fuel cycle centres. These centres seem to be specifically attractive with regard to the back end of the fuel cycle, including on-site disposal of radioactive wastes. The respective German approach is presented as an example. Special emphasis is given to the site selection procedures in this case. Time scale and cost for the implementation of this concept are important factors to be looked at. Since participation of governmental institutions in these centres seems to be indispensable their respective roles as compared to industry must be clearly defined. The idea of adjusting fuel cycle centres to regional rather than national use might be an attractive option, depending on the specific parameters in the region, though results of existing multinational ventures are inconclusive in this respect. Major difficulties might be expected e.g. because of different national safety regulations and standards as well as commercial conditions among partner countries. Public acceptance in the host country seems to be another stumbling block for the realization of this type of multinational facilities

  8. Development of a Mechanical Engineering Test Item Bank to promote learning outcomes-based education in Japanese and Indonesian higher education institutions

    Directory of Open Access Journals (Sweden)

    Jeffrey S. Cross

    2017-11-01

    Full Text Available Following on the 2008-2012 OECD Assessment of Higher Education Learning Outcomes (AHELO feasibility study of civil engineering, in Japan a mechanical engineering learning outcomes assessment working group was established within the National Institute of Education Research (NIER, which became the Tuning National Center for Japan. The purpose of the project is to develop among engineering faculty members, common understandings of engineering learning outcomes, through the collaborative process of test item development, scoring, and sharing of results. By substantiating abstract level learning outcomes into concrete level learning outcomes that are attainable and assessable, and through measuring and comparing the students’ achievement of learning outcomes, it is anticipated that faculty members will be able to draw practical implications for educational improvement at the program and course levels. The development of a mechanical engineering test item bank began with test item development workshops, which led to a series of trial tests, and then to a large scale test implementation in 2016 of 348 first semester master’s students in 9 institutions in Japan, using both multiple choice questions designed to measure the mastery of basic and engineering sciences, and a constructive response task designed to measure “how well students can think like an engineer.” The same set of test items were translated from Japanese into to English and Indonesian, and used to measure achievement of learning outcomes at Indonesia’s Institut Teknologi Bandung (ITB on 37 rising fourth year undergraduate students. This paper highlights how learning outcomes assessment can effectively facilitate learning outcomes-based education, by documenting the experience of Japanese and Indonesian mechanical engineering faculty members engaged in the NIER Test Item Bank project.First published online: 30 November 2017

  9. Researches in radiation protection and safety at Moscow engineering physics institute

    International Nuclear Information System (INIS)

    Kramer-Ageev, E.A.; Lebedev, L.A.

    1994-01-01

    Department of Radiation Physics of Moscow Engineering Physics Institute is a research and teaching institution in the field of radiation protection, dosimetry, shielding and in radioecology. The scientific activity which has been doing at the department for many years includes the following directions: 1. Development of mathematical models and computational methods for an evaluation of external and internal exposure of people living on contaminated areas. Recently the computational model for forecast of internal irradiation via food chains was linked with computer geographical information systems. 2. Development of techniques and instruments for the measurements of radioactive contamination of soil, air, water and agricultural products. Department has special laboratory for this. 3. Application of computational methods to the problem of nuclear medicine. The whole body spectrometry and radiation 'coding' are used as an efficient methods of obtaining information on the radionuclides location in the human body. 4. Application of computational methods to the problem of radiation safety at nuclear power plants. It allows one to calculate radiation fields in shielding and the characteristics of nuclear wastes. (author)

  10. A Study to Determine the Basic Science and Mathematics Topics Most Needed by Engineering Technology Graduates of Wake Technical Institute in Performing Job Duties.

    Science.gov (United States)

    Edwards, Timothy I.; Roberson, Clarence E., Jr.

    A survey of 470 graduates of the six engineering technology programs at Wake Technical Institute--Architectural, Chemical, Civil Engineering, Computer, Electronic Engineering, and Industrial Engineering Technologies--and 227 of their employers was conducted in October, 1979, to determine the science and mathematics topics most needed by…

  11. Idaho National Engineering and Environmental Laboratory institutional plan -- FY 2000--2004

    Energy Technology Data Exchange (ETDEWEB)

    Enge, R.S.

    1999-12-01

    In this first institutional plan prepared by Bechtel BWXT Idaho, LLC, for the Idaho National Engineering and Environmental Laboratory, the INEEL will focus its efforts on three strategic thrusts: (1) Environmental Management stewardship for DOE-EM, (2) Nuclear reactor technology for DOE-Nuclear Energy (NE), and (3) Energy R and D, demonstration, and deployment (initial focus on biofuels and chemicals from biomass). The first strategic thrust focuses on meeting DOE-EMs environmental cleanup and long-term stewardship needs in a manner that is safe, cost-effective, science-based, and approved by key stakeholders. The science base at the INEEL will be further used to address a grand challenge for the INEEL and the DOE complex--the development of a fundamental scientific understanding of the migration of subsurface contaminants. The second strategic thrust is directed at DOE-NEs needs for safe, economical, waste-minimized, and proliferation-resistant nuclear technologies. As NE lead laboratories, the INEEL and ANL will pursue specific priorities. The third strategic thrust focuses on DOE's needs for clean, efficient, and renewable energy technology. As an initial effort, the INEEL will enhance its capability in biofuels, bioprocessing, and biochemicals. The content of this institutional plan is designed to meet basic DOE requirements for content and structure and reflect the key INEEL strategic thrusts. Updates to this institutional plan will offer additional content and resource refinements.

  12. Description of the Nuclear Training Centre

    International Nuclear Information System (INIS)

    Wagadarikar, V.K.

    1974-01-01

    The Department of Atomic Energy, Government of India has developed an on-going programme for constructing and operating heavy water moderated, natural uranium fuelled power stations of the CANDU-type. With the view to train personnel required for operation and maintenance of these stations, a Nuclear Training Centre has been set up at the site of the Rajasthan Atomic Power Station. A description of the nuclear training centre with its facilities is given. The training programme for engineers, operators, mechanical, electrical and control maintainers etc. is given in detail, along with the actual syllabi for respective courses. Examples of the typical field check list are provided. (K.B.)

  13. Institute of Bioinorganic and Radiopharmaceutical Chemistry. Annual report 2000

    International Nuclear Information System (INIS)

    Johannsen, B.; Seifert, S.

    2001-01-01

    In 2000 the Rossendorf research centre continued and further developed its basic and application-oriented research. Research at the Institute of Bioinorganic and Radiopharmaceutical Chemistry, one of five institutes in the Research Centre, was focused on radiotracers as molecular probes to make the human body biochemically transparent with regard to individual molecular reactions. In this respect the potential for diagnostic application depends on the quality and versatility of radiopharmaceutical chemistry, which is the main discipline in our Institute. Areas in which the Institute was particularly active were the design of new radiotracers, both radiometal-based and natural organic molecules, the elaboration of radiolabelling concepts and procedures and the chemical and pharmacological evaluation of new tracers. This was complemented by more clinically oriented activities in the Positron Emission Tomography Centre Rossendorf. With numerous contributions in the fields of radiopharmaceutical chemistry, tumour agents, tumour diagnosis and brain biochemistry this Annual Report will document the scientific progress made in 2000. (orig.)

  14. Institutional Support : Institute of Economic Affairs (IEA-Ghana ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The Institute of Economic Affairs in Ghana (IEA-Ghana) was founded in 1989 during the twilight of the military dictatorship. At that time there were no independent policy centres in the country and hence little public policy dialogue. Still, IEA-Ghana succeeded in creating a platform for debate and made a strong case for major ...

  15. Tangible Results of Nuclear Information Centre in Slovenia

    International Nuclear Information System (INIS)

    Jencic, I.

    2010-01-01

    Nuclear Training Centre Ljubljana was established in 1989 and a few years later its activity expanded from pure professional training to public information, as well. The goal was to achieve better social acceptance of nuclear power in Slovenia which was very low in early 1990's. We focused on schoolchildren and other organized groups and since then we had more than 120,000 visitors. The mainstays of our activity are a live lecture and a permanent exhibition. In the recent years the Nuclear Information Centre and its web site www.icjt.org has also become a respected source of information for the media and the general public. In the first few years it was quite hard to notice any improvement in public attitude and even later, when nuclear power became less controversial, it was difficult to link this change to the activities of the Nuclear Information Centre. Recently, however, several independent polls on a representative sample of general population proved that in a long term, our activities did have tangible results and that Nuclear Information Centre as part of Jozef Stefan Institute is regarded as trusted source of information. An Eurobarometer poll showed that Slovenia ranked among the first three countries in Europe regarding knowledge of nuclear waste issues in Europe. Another poll showed that Jozef Stefan Institute is the most trusted institution on radioactive waste issues. A third independent poll showed that the knowledge and the attitude towards nuclear is most favorable in the youngest age group of general population, i.e., many of whom have previously visited the Nuclear Information Centre. These are all indications that the activities of the Nuclear Information Centre have contributed to a measurable change in the public opinion and knowledge of nuclear issues in Slovenia. Furthermore this shows that informing youngsters is a very long term activity and that first tangible results can only be expected in 15 years or so. On the other hand, however

  16. Creation of security engineering programs by the Southwest Surety Institute

    Science.gov (United States)

    Romero, Van D.; Rogers, Bradley; Winfree, Tim; Walsh, Dan; Garcia, Mary Lynn

    1998-12-01

    The Southwest Surety Institute includes Arizona State University (ASU), Louisiana State University (LSU), New Mexico Institute of Mining and Technology (NM Tech), New Mexico State University (NMSU), and Sandia National Laboratories (SNL). The universities currently offer a full spectrum of post-secondary programs in security system design and evaluation, including an undergraduate minor, a graduate program, and continuing education programs. The programs are based on the methodology developed at Sandia National Laboratories over the past 25 years to protect critical nuclear assets. The programs combine basic concepts and principles from business, criminal justice, and technology to create an integrated performance-based approach to security system design and analysis. Existing university capabilities in criminal justice (NMSU), explosives testing and technology (NM Tech and LSU), and engineering technology (ASU) are leveraged to provide unique science-based programs that will emphasize the use of performance measures and computer analysis tools to prove the effectiveness of proposed systems in the design phase. Facility managers may then balance increased protection against the cost of implementation and risk mitigation, thereby enabling effective business decisions. Applications expected to benefit from these programs include corrections, law enforcement, counter-terrorism, critical infrastructure protection, financial and medical care fraud, industrial security, and border security.

  17. The EPFL Plasma Physics Research Centre

    International Nuclear Information System (INIS)

    2001-01-01

    The Plasma Physics Research Centre (CRPP) is a non-departmental unit of the EPFL, and currently employs about 130 people, about 105 on the EPFL site and the rest at the Paul Scherrer Institute, PSI, in Villigen, Switzerland. The CRPP is a National Competence Centre in the field of Plasma Physics. In addition to plasma physics teaching, its missions are primarily the pursuit of scientific research in the field of controlled fusion within the framework of the EURATOM-Swiss Confederation Association and the development of its expertise as well as technology transfer in the field of materials research. As the body responsible for all scientific work on controlled fusion in Switzerland, the CRPP plays a national role of international significance. This document of 6 pages presents the explanation of the Plasma Physics Research Centre' activities (CRPP). (author)

  18. Supply Chain Engineering and the Use of a Supporting Knowledge Management Application

    Science.gov (United States)

    Laakmann, Frank

    The future competition in markets will happen between logistics networks and no longer between enterprises. A new approach for supporting the engineering of logistics networks is developed by this research as a part of the Collaborative Research Centre (SFB) 559: "Modeling of Large Networks in Logistics" at the University of Dortmund together with the Fraunhofer-Institute of Material Flow and Logistics founded by Deutsche Forschungsgemeinschaft (DFG). Based on a reference model for logistics processes, the process chain model, a guideline for logistics engineers is developed to manage the different types of design tasks of logistics networks. The technical background of this solution is a collaborative knowledge management application. This paper will introduce how new Internet-based technologies support supply chain design projects.

  19. Discharged of the nuclear wastes by health service centres

    International Nuclear Information System (INIS)

    Mazur, G.; Jednorog, S.

    1993-01-01

    In this paper Polish national regulation in radiation protection on nuclear medical domain was discussed. The method of utilized nuclear wastes in medical and science centres was deliberate. From many years activity of wastes from Nuclear Medicine Department of Central Clinical Hospital Armed Forces Medical Academy and Radiation Protection Department of Armed Forces Institute of Hygiene and Epidemiology was measured. In debate centres radiation monitoring was performed. In this purpose the beta global activity and gamma spectrometry measurement of discharged wastes occurred. From last year in discussed centres wastes activity do not increased permissible levels. (author). 3 refs, 5 tabs

  20. 19 January 2011 - British University of Manchester, Vice-President and Dean for the Faculty of Engineering and Physical Sciences Professor of Structural Engineering School of Mechanical, Aerospace and Civil Engineering C. Bailey in CERN Control Centre with Department Head P. Collier; at LHCb with R. Lindner and ATLAS underground experimental area with Deputy Spokesperson D. Charlton, througout accompanied by . Collier with R. Appleby and F. Loebinger

    CERN Multimedia

    Maximilien Brice

    2011-01-01

    19 January 2011 - British University of Manchester, Vice-President and Dean for the Faculty of Engineering and Physical Sciences Professor of Structural Engineering School of Mechanical, Aerospace and Civil Engineering C. Bailey in CERN Control Centre with Department Head P. Collier; at LHCb with R. Lindner and ATLAS underground experimental area with Deputy Spokesperson D. Charlton, througout accompanied by . Collier with R. Appleby and F. Loebinger

  1. Proposal for an ecoradiological centre model

    International Nuclear Information System (INIS)

    Perovic, S.M.; Zunic, Z.; Demajo, M.; Konjevic, N.

    1998-01-01

    The problem of establishing an optimal Ecoradiological Centre Model is studied in some detail for the town of Kotor which is under the protection of the World Cultural and Natural Heritage. The proposed structure of the Centre is analyzed from the view of Engineering, Education and Scientific parameters. This Model is suitable for implementation as a network Centre Model for the state of Montenegro. Further, the modelling strategy of the ecoradiological condition control of natural, construction, bio and technological systems is elaborated. The proposal includes the ecoradiological monitoring, radioactive and electromagnetic radiation processing and protection for different natural zones as well as their different geostructures, aerial and hydrogeological conditions. The programme also includes all housing objects (hotels, flats, houses, office premises etc.). Here will also be presented the radiation protection and recommendations for the implementation of Title VII of the European Basic Safety Standards Directive (BSS), concerning significant increase in exposure due to natural radiation sources. Also, the proposal of Local Radiation Protection for the town of Kotor is presented. Our proposal for an Ecoradiological Centre Model presented here is in a form of a pilot programme, applicable also for other towns and states. (author)

  2. IAEA establishes International Seismic Safety Centre

    International Nuclear Information System (INIS)

    2008-01-01

    Full text: The IAEA today officially inaugurated an international centre to coordinate efforts for protecting nuclear installations against the effects of earthquakes. The International Seismic Safety Centre (ISSC), which has been established within the IAEA's Department of Nuclear Safety and Security, will serve as a focal point on seismic safety for nuclear installations worldwide. ISSC will assist countries on the assessment of seismic hazards of nuclear facilities to mitigate the consequences of strong earthquakes. 'With safety as our first priority, it is vital that we pool all expert knowledge available worldwide to assist nuclear operators and regulators to be well prepared for coping with major seismic events,' said Antonio Godoy, Acting Head of the IAEA's Engineering Safety Section and leader of the ISSC. 'The creation of the ISSC represents the culmination of three decades of the IAEA's active and recognized involvement in this matter through the development of an updated set of safety standards and the assistance to Member States for their application.' To further seismic safety at nuclear installations worldwide, the ISSC will: - Promote knowledge sharing among the international community in order to avoid or mitigate the consequences of extreme seismic events on nuclear installations; - Support countries through advisory services and training courses; and - Enhance seismic safety by utilizing experience gained from previous seismic events in member states. The centre is supported by a scientific committee of high-level experts from academic, industrial and nuclear safety authorities that will advise the ISSC on implementation of its programme. Experts have been nominated from seven specialized areas, including geology and tectonics, seismology, seismic hazard, geotechnical engineering, structural engineering, equipment, and seismic risk. Japan and the United States have both contributed initial funds for creation of the centre, which will be based at

  3. TTI Phase 2 Institutional Support: The Institute of Economic Affairs ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This funding will help strengthen the Institute of Economic Affairs' ... IEA-Kenya's research areas include social security, trade and competition policies, ... involving other think tanks as a cost-effective, learning-by-doing approach ... the results of its 2017 call for proposals to establish Cyber Policy Centres in the Global South.

  4. System of regional centres of first aid in cases of radiation accidents in Germany

    International Nuclear Information System (INIS)

    Fehringer, F.; Seitz, G.

    1996-01-01

    When in the seventies the number of occupational radiation exposed persons in the Federal Republic of Germany increased from about 35,000 (1974) to about 160,000 (1978) the Industrial Injuries Insurance Institutes felt prompted to reflect about special measures to prevent radiation accidents and provide health care for this special cases. They did so without any actual occasion: accidents were persons have been exposed by ionizing radiation were in the seventies just as rare as today. But that fact does not allow the Industrial Injuries Insurance Institutes to neglect the existing potential for severe accidents. So the Industrial Injuries Insurance Institute for the Electrical Industry including Precision Mechanics and the Industrial Injuries Insurance Institute for the Chemical Industry created the Institute for Radiation Protection in 1978. The primary task of that Institute is to guarantee an effective first aid in the case of a radiation accident. To realize that task the Institute contracted 11 wellknown institutions like radiological departments of large hospitals or the medical departments of research centres where the i knowledge on diagnostic and therapy of radiation effects is present. They are called 'Regionale Strahlenschutzzentren', Regional Centres for Radiation Protection (RCRP). In the case of radiation accidents these RCRP are the logistical centres for all arising questions of treatment. They have facilities for reconstructing exposure situations and assessing and evaluating doses, including measurements of internal contamination as well as for medical inpatient or out-patient treating like internal or external decontamination. Another important task of the RCRP is to advise employers in ad radiation protection questions which arise with the industrial application of ionizing radiation. Of course the centres give also answer to many question from members of the public, for example the personal effects of the power plant accident at Chernobyl

  5. List of scientific publications of the Karlsruhe Nuclear Reseach Centre for the year 1986

    International Nuclear Information System (INIS)

    1987-05-01

    This report contains the titles of the publications which appeared during the year 1986. Lectures which have not been printed yet are listed separately from the literature. All the patents awarded or published in 1986 are given; i.e. patents and publications of patents. Summarising lectures and practical instructions from the courses at the College for Nuclear Technology are not included in the list. The list of publications is arranged according to Institutes. Among the projects, only the published project reports and publications by members of the staff of the project are listed. The publications printed at the Nuclear Research Centre from the research and development projects of the Manufacturing Technique Project (PFT) and the project on the 'European Research Centre for Measures for Keeping the Air Clean' (PEF), which are being carried out by the Nuclear Research Centre in collaboration with firms and institutions, are also included in the list. The list also contains publications by the external office of the West German Institute of Food resident in the Nuclear Research Centre. The last chapter of the list contains publications on guest experiments at the Nuclear Research Centre. The list has an alphabetical index, which gives page and registry numbers. (orig./GG) [de

  6. Gender Equality in Public Higher Education Institutions of Ethiopia: The Case of Science, Technology, Engineering, and Mathematics

    Science.gov (United States)

    Egne, Robsan Margo

    2014-01-01

    Ensuring gender equality in higher education system is high on the agenda worldwide particularly in science disciplines. This study explores the problems and prospects of gender equality in public higher education institutions of Ethiopia, especially in science, technology, engineering, and mathematics. Descriptive survey and analytical research…

  7. Myanmar: The Community Learning Centre Experience.

    Science.gov (United States)

    Middelborg, Jorn; Duvieusart, Baudouin, Ed.

    A community learning centre (CLC) is a local educational institution outside the formal education system, usually set up and managed by local people. CLCs were first introduced in Myanmar in 1994, and by 2001 there were 71 CLCs in 11 townships. The townships are characterized by remoteness, landlessness, unemployment, dependency on one cash crop,…

  8. Exploring the Academic and Social Experiences of Latino Engineering Community College Transfer Students at a 4-Year Institution: A Qualitative Research Study

    Science.gov (United States)

    Hagler, LaTesha R.

    As the number of historically underrepresented populations transfer from community college to university to pursue baccalaureate degrees in science, technology, engineering, and mathematics (STEM), little research exists about the challenges and successes Latino students experience as they transition from 2-year colleges to 4-year universities. Thus, institutions of higher education have limited insight to inform their policies, practices, and strategic planning in developing effective sources of support, services, and programs for underrepresented students in STEM disciplines. This qualitative research study explored the academic and social experiences of 14 Latino engineering community college transfer students at one university. Specifically, this study examined the lived experiences of minority community college transfer students' transition into and persistence at a 4-year institution. The conceptual framework applied to this study was Schlossberg's Transition Theory, which analyzed the participant's social and academic experiences that led to their successful transition from community college to university. Three themes emerged from the narrative data analysis: (a) Academic Experiences, (b) Social Experiences, and (c) Sources of Support. The findings indicate that engineering community college transfer students experience many challenges in their transition into and persistence at 4-year institutions. Some of the challenges include lack of academic preparedness, environmental challenges, lack of time management skills and faculty serving the role as institutional agents.

  9. International Advisory Committee R Balasubramanian, The Institute ...

    Indian Academy of Sciences (India)

    Deepak Dhar, Tata Institute of Fundamental Research, Mumbai, India. Hendrik B Geyer, University of Stellenbosch, South Africa. Sanjay Jain, University of Delhi, India. S Kailas, Bhabha Atomic Research Centre, Mumbai, India. P K Kaw, Institute of Plasma Research, Gandhinagar, India. Narendra Kumar, Raman Research ...

  10. Sud du Sahara | Page 200 | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Sud du Sahara. Sud du Sahara. Read more about TTI Phase 2 Institutional Support: Economic Policy Research Centre. Langue English. Read more about TTI Phase 2 Institutional Support: Science, Technology and Innovation Policy Research Organization. Langue English. Read more about Relations entre les think tanks ...

  11. THE ELUSIVENESS OF LEARNER-CENTRED TEACHING

    Directory of Open Access Journals (Sweden)

    Ervin Kovačević

    2016-03-01

    Full Text Available This research will explore teaching styles of university professors. Teaching style is an umbrella term for teaching decisions made during the entire teaching process – planning, delivery, and evaluation. Contemporary university teachers are advised to adopt the learner-centred teaching style which is assumed to produce remarkable possibilities. In the Fall Semester 2015 fifty-two respondents in different faculties of International University of Sarajevo were surveyed using The Principles of Adult Learning Scale inventory designed by Gary J. Conti. Inventory scores were calculated according to guidelines suggested by the author of the inventory. The scores revealed that majority of respondents strongly supported teacher-centred rather than learner-centred styles of instruction. Scores were analysed on gender lines and across three different faculties, namely: Arts and Social Sciences; Business and Administration; Engineering and Natural Sciences. In all five groups none of the seven teaching style indicators was found to conform with the learner-centred teaching criteria. There was no statistically significant difference between the two genders’ preference for a teaching style. And there was no statistically significant difference between teaching style preference across the three different faculties.The results of this research imply that the learner-centred style of instruction is not frequently implemented. Secondly, the results indicate that the requirements necessary for proper application of the learner-centred teaching style are not easy to meet in current written and unwritten norms. Finally, the results show that traditional teaching styles, which have been preserved in different scientific fields, still predominate in universities.

  12. The journal that spawned an institution

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    When in 1958 an announcement was made in the Nuclear Energy Engineer that a foundling-committee had been set up to form the Institution of Nuclear Engineers, the journal was already into volume 12. Five members of the Institution's Publishing Committee here give their impressions of the Journal during the first five formative years of the Institution. (U.K.)

  13. Community Documentation Centre on Industrial Risk. Volume 3 (consolidated volume containing also content of vol. 1 and 2)

    International Nuclear Information System (INIS)

    1990-09-01

    The Directorate-General for Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities is responsible for the effective and harmonized implementation of the Directive 82/501/EEC on the major-accident hazards of certain industrial activities. To this end, the Commission, in collaboration with the Committee of Competent Authorities responsible for the implementation of this Directive in the twelve Member States, carries out a whole range of activities. One of the most essential areas for action identified was the need for a systematic diffusion of information concerning the practical implementation of the Directive in the Member States, including the technical rules and guidelines applied, the safety practices and the lessons learnt from major accidents. Therefore, the Commission decided to set up a Community Documentation Centre on Industrial Risks (CDCIR). This Documentation Centre is run by the European Commission, Joint Research Centre, Institute for Systems Engineering and Informatics (ISEI), at Ispra, Italy, among its support activities on the implementation of the Directive. The Documentation Centre will collect, classify and review technical rules, guidelines and documents concerning the requirements of the Directive, as well as the safety of industrial installations produced by governments, administrative, scientific or technical bodies, national or international organizations and industrial or professional associations. Documents on major accidents in the form of reports, videotapes will also be collected and reviewed. The Centre is accessible to interested visitors, documents which are not covered by copyright and are not restricted can be obtained from the Documentation Centre on request. Periodical volumes which will feature the inventory, including abstracts, of the collected material will be published and made available to all interested parties. The Centre will also publish documents devoted to compare existing

  14. The Role of Mathematics Learning Centres in Engineering Education.

    Science.gov (United States)

    Fuller, Milton

    2002-01-01

    Points out the diminishing demand for mathematics undergraduate programs and the strong trend in engineering education to make greater use of computer coursework such as Mathcad, Matlab, and other software systems for the mathematical and statistical components of engineering programs. Describes the changing role of mathematics learning centers…

  15. France: Improvement measures implemented at the Centre de la Manche

    International Nuclear Information System (INIS)

    2005-01-01

    was constructed to divert rainwater away from the repository. Corrective actions taken before the institutional control period. ANDRA filed an application in September 1994 for authorization to begin the institutional control period. The safety authority felt that the application for authorization to begin the institutional control period should be submitted to a public inquiry. The inquiry commission gathered the opinions of the population and, in February 1996, issued a favourable opinion on the transition of the Centre de la Manche to the institutional control period. Subsequently, after complaints were filed against ANDRA by ecological associations for water pollution and violations of the regulations, the Government decided to set up a second evaluation commission in February 1996. This commission was asked to evaluate the situation concerning the Centre de la Manche disposal facility and to express its opinion on the impact of the Centre on the environment. The Government made the commission's conclusions public in July 1996. The commission concluded that if the intended measures were taken, the Centre would present no significant health risk for the local population. In June 1998, ANDRA sent the supervisory ministries a new preliminary report concerning the transition to the institutional control period, taking into account the commission's conclusions. The review of the inventory was completed, including the provision of information about missing data, and the impact of the facility was reassessed from the radiological and chemical standpoint. ANDRA then proposed phased institutional control divided into three periods. The first period would be one of highly active surveillance, to last about five years and intended in particular to assess the satisfactory operation of the present cap. The second period would be one of active surveillance, to last between 50 and 100 years. ANDRA's presence at the centre is necessary to ensure monitoring and maintenance, as

  16. Integrating design and communication in engineering education: a collaboration between Northwestern University and the Rehabilitation Institute of Chicago.

    Science.gov (United States)

    Hirsch, Penny L; Yarnoff, Charles

    2011-01-01

    The required course for freshmen in Northwestern University's engineering school - a 2-quarter sequence called Engineering Design and Communication (EDC) - is noteworthy not only for its project-based focus on user-centered design, but also for its innovative integrated approach to teaching communication, teamwork, and ethics. Thanks to the collaboration between EDC faculty and staff at the Rehabilitation Institute of Chicago, EDC students, at the beginning of their education, experience the excitement of solving problems for real clients and users. At the same time, these authentic design projects offer an ideal setting for teaching students how to communicate effectively to different audiences and perform productively as team members and future leaders in engineering.

  17. The Asylum Centre as “Just Another Local Institution”

    DEFF Research Database (Denmark)

    Larsen, Birgitte Romme

    2019-01-01

    This article investigates everyday practices of co-residency and ‘institutional neighbourliness’ amongst asylum seekers and local inhabitants in the small Danish town of Jelling. Where asylum centres in Denmark are sometimes faced with local opposition and are often isolated from nearby settlements...... an ethnographic exploration of how over time and outside of an urban, cosmopolitan setting processes of multiethnic co-residency are shaped, interacted, and narrated, through everyday physical meetings in public space. The article shows how local cultural history proves paramount for understanding the present......-day migratory encounter and outcome in Jelling in its complexity, including the mundane neighbourly routines and pragmatic workings through which the institutions of ‘the local community’ and ‘the asylum centre’ have spatially and socially merged. Today the asylum centre has become “just another local...

  18. Shopping Centres and Selected Aspects of Shopping Behaviour (Brno, the Czech Republic)

    Czech Academy of Sciences Publication Activity Database

    Kunc, J.; Tonev, P.; Szczyrba, Z.; Frantál, Bohumil

    2012-01-01

    Roč. 7, č. 2 (2012), s. 39-51 ISSN 2065-4421 Institutional support: RVO:68145535 Keywords : shopping centres * shopping habits * commuting to retail shops Subject RIV: AO - Sociology, Demography http://technicalgeography.org/pdf/2_2012/05_josef_kunc_petr_tonev_zdenek_szczyrba_bohumil_frantal_shopping_centres_and_selected_aspects_of_shopping_behaviour.pdf

  19. The Nuclear Review: the Institution of Nuclear Engineers' response to the Review of Nuclear Power

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    The United Kingdom Government's Nuclear Review currently underway, addresses whether and in what form nuclear power should continue to be part of the country's power generation capability. This article sets out the response of the Institution of Nuclear Engineers to the Nuclear Review. This pro-nuclear group emphasises the benefits to be gained from diversity of generation in the energy supply industry. The environmentally benign nature of nuclear power is emphasised, in terms of gaseous emissions. The industry's excellent safety record also argues in favour of nuclear power. Finally, as power demand increases globally, a health U.K. nuclear industry could generate British wealth through power exports and via the construction industry. The Institution's view on radioactive waste management is also set out. (UK)

  20. Journal of the Ghana Institution of Engineers: Contact

    African Journals Online (AJOL)

    Principal Contact. Dr. Mohammed Salifu Editor-in-Chief Kwame Nkrumah University of Science and. Department of Civil Engineering Faculty of Civil and Geomatic Engineering College of Engineering Kwame Nkrumah University of Science and Technology (KNUST) University Post Office Kumasi, GHANA Phone: 00 233 51 ...

  1. Assuring measurement quality in person-centred healthcare

    Science.gov (United States)

    Pendrill, L. R.

    2018-03-01

    Is it realistic to aspire to the same kind of quality-assurance of measurement in person-centred care, currently being implemented in healthcare globally, as is established in the physical sciences and engineering? Ensuring metrological comparability (‘traceability’) and reliably declaring measurement uncertainty when assessing patient ability or increased social capital are however challenging for subjective measurements often characterised by large dispersion. Drawing simple analogies between ‘instruments’ in the social sciences—questionnaires, ability tests, etc—and engineering instruments such as thermometers does not go far enough. A possible way forward, apparently equally applicable to both physical and social measurement, seems to be to model inferences in terms of performance metrics of a measurement system. Person-centred care needs person-centred measurement and a full picture of the measurement process when man acts as a measurement instrument is given in the present paper. This complements previous work by presenting the process, step by step, from the observed indication (e.g. probability of success, P success, of achieving a task), through restitution with Rasch measurement theory, to the measurand (e.g. task difficulty). Rasch invariant measure theory can yield quantities—‘latent’ (or ‘explanatory’) variables such as task challenge or person ability—with characteristics akin to those of physical quantities. Metrological references for comparability via traceability and reliable estimates of uncertainty and decision risks are then in reach even for perceptive measurements (and other qualitative properties). As a case study, the person-centred measurement of cognitive ability is examined, as part of the EU project EMPIR 15HLT04 NeuroMet, for Alzheimer’s, where better analysis of correlations with brain atrophy is enabled thanks to the Rasch metrological approach.

  2. Retention and promotion of women and underrepresented minority faculty in science and engineering at four large land grant institutions.

    Science.gov (United States)

    Gumpertz, Marcia; Durodoye, Raifu; Griffith, Emily; Wilson, Alyson

    2017-01-01

    In the most recent cohort, 2002-2015, the experiences of men and women differed substantially among STEM disciplines. Female assistant professors were more likely than men to leave the institution and to leave without tenure in engineering, but not in the agricultural, biological and biomedical sciences and natural resources or physical and mathematical sciences. In contrast, the median times to promotion from associate to full professor were similar for women and men in engineering and the physical and mathematical sciences, but one to two years longer for women than men in the agricultural, biological and biomedical sciences and natural resources. URM faculty hiring is increasing, but is well below the proportions earning doctoral degrees in STEM disciplines. The results are variable and because of the small numbers of URM faculty, the precision and power for comparing URM faculty to other faculty were low. In three of the four institutions, lower fractions of URM faculty than other faculty hired in the 2002-2006 time frame left without tenure. Also, in the biological and biomedical and physical and mathematical sciences no URM faculty left without tenure. On the other hand, at two of the institutions, significantly more URM faculty left before their tenth anniversary than other faculty and in engineering significantly more URM faculty than other faculty left before their tenth anniversary. We did not find significant differences in promotion patterns between URM and other faculty.

  3. The RA nuclear research reactor at VINCA Institute as an engineering and scientific challenge

    International Nuclear Information System (INIS)

    Mesarovic, M.

    1997-01-01

    The RA nuclear research at the Vinca Institute of Nuclear Sciences is the largest nuclear research facility in Yugoslavia and belongs to that generation of research reactors which have had an important contribution to nuclear technology development. As these older reactors were generally not built to specific nuclear standards, new safety systems had to be installed at the RA reactor for a renewal of its operating licence in 1984 and it was shut down, after 25 years of operation. Although all the required and several additional systems were built for the restart of the RA reactor, a disruption of foreign delivery of new control equipment caused its conversion to a 'dormant' facility, and it is still out of operation. Therefore, the future status of the RA reactor presents an engineering and scientific challenge to the engineers and scientists from Yugoslavia and other countries that may be interested to participate. To attract their attention on the subject, principal features of the RA reactor and its present status are described in detail, based on a recent engineering economic and safety evaluation. A comparative review of the world research reactors is also presented.(author)

  4. Nine meta-functions for science museums and science centres

    DEFF Research Database (Denmark)

    Achiam, Marianne; Sølberg, Jan

    2017-01-01

    Science centres and science museums face challenges such as increased accountability, increased demands for accessibility, and growing competition from leisure experiences. On their own, the traditional museum practices of preservation, communication, and research are insufficient to address...... Ecsite conference, to map out how these institutions address modern-day challenges. This analysis generates a new framework of nine meta-functions for science centres and science museums that can guide and help qualify discussions about their present and future activities. We discuss the new meta...

  5. Surface engineering and heat treatment

    International Nuclear Information System (INIS)

    Morton, P.H.

    1991-01-01

    This book is the proceedings of a Conference organised jointly by The Institute of Metals and The Centre for Exploitation of Science and Technology (CEST). It sets out to review this role and point the way to the future by collecting together a series of invited papers written by noted authorities in their fields. The opening review by CEST highlights the economic and industrial importance of Surface Engineering and is followed by a group of four articles devoted to specific branches of industry. Several technical papers then describe various aspects of the development of heat treatment over the last twenty-five years. These are followed by papers describing advances made possible by new technologies such as plasma, laser and ion beam. A separate abstract has been prepared for a paper on materials aspects of ion beam technology. (author)

  6. Nanoscale Science and Engineering in Romania

    International Nuclear Information System (INIS)

    Dascalu, Dan; Topa, Vladimir; Kleps, Irina

    2001-01-01

    In spite of difficult working conditions and with very low financial support, many groups from Romania are involved in emerging fields, such as the nanoscale science and technology. Until the last years, this activity was developed without a central coordination and without many interactions between these research groups. In the year 2000, some of the institutes and universities active in the nanotechnology field in Romania founded the MICRONANOTECH network. The aim of this paper is to emphasize the main activities and results of the Romanian groups working in this novel domain. Most of the groups are deal with the nanomaterial technology and only few of them have activities in nanostructure science and engineering, in new concepts and device modeling and technology. This paper describes the nanotechnology research development in two of the most significant institutes from Romania: Centre for Nanotechnologies from National Institute for Research and Development in Microtehnologies (IMT-Bucharest) and from National Institute for Research and Development in Materials Physics (INCD-FM), Magurele. The Romanian research results in nanotechnology field were presented in numerous papers presented in international conferences or published in national and international journals. They are also presented in patents, international awards and fellowships. The research effort and financial support are outlined. Some future trends of the Romanian nanoscale science and technology research are also described

  7. Mr Bikash Sinha, Director of SAHA & VECC and Prof. Rolf Heuer, Director general of CERN, sign a collaboration agreements between SAHA (Saha Institute of Nuclear Physics), VECC (Variable Energy Cyclotron Centre), India and CERN ISOLDE.

    CERN Multimedia

    Maximilien Brice

    2009-01-01

    Mr Bikash Sinha, Director of SAHA & VECC and Prof. Rolf Heuer, Director general of CERN, sign a collaboration agreements between SAHA (Saha Institute of Nuclear Physics), VECC (Variable Energy Cyclotron Centre), India and CERN ISOLDE.

  8. Soutien organisationnel de la phase 2 de l'ITT : Public Affairs Centre ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    faire sa place en tant que centre de ressources principal, avec une solide équipe de chercheurs et un système robuste d'assurance de la qualité. ... will enhance the Centre for the Study of Developing Societies' (CSDS) role as a credible public policy institution in India by strengthening its ability to provide high-quality,.

  9. Physics Competence Assessment in Engineering Higher Education Institution

    Directory of Open Access Journals (Sweden)

    A. F. An

    2015-01-01

    Full Text Available In designing the undergraduate programmes, a development of objectified procedures to assess students and graduates’ level of skills and learning outcomes aimed at achieving the ultimate goals of training is an important task for Higher Education Institutions (HEI.The purpose of this work is to develop a description of the physics course objectives differentiated according to levels of learning achievements for engineering HEI, as well as the assessment procedures and diagnostic means associated with this description to specify and define the degree of their achievement.The taxonomy of levels to master learning content is proposed and tested. Its aim is to assess rapidly a degree of achieved objectives i.e. meeting requirements for student and graduate’s competences in physics. Classification is given according to which the reproductive activity is a manifestation of the levels of recognition, reproduction and reproductive use of knowledge while the productive activity is an ability to use previously learned information, methods of action for the new scenarios, situations, conditions. The paper presents content of the main features of learning the study materials in physics at each taxonomic level. It offers a developed package of assessment materials based on traditional (tests, training tasks and competence-oriented control methods (professionally oriented and case studies, integrative assignments. The paper proves that when designing the diagnostic means it is expedient to take into consideration the analysis results of the expert assessments that the physics course curricular elements are of significance for fundamental and ideological studies and successful learning of the module of professional disciplines. It also shows that there is a need to use the content of typical tasks in disciplines of professional cycle of the undergraduate programme.The proposed approaches and results can serve as a basis for teaching improvement in physics

  10. E-learning in engineering education: a theoretical and empirical study of the Algerian higher education institution

    Science.gov (United States)

    Benchicou, Soraya; Aichouni, Mohamed; Nehari, Driss

    2010-06-01

    Technology-mediated education or e-learning is growing globally both in scale and delivery capacity due to the large diffusion of the ubiquitous information and communication technologies (ICT) in general and the web technologies in particular. This statement has not yet been fully supported by research, especially in developing countries such as Algeria. The purpose of this paper was to identify directions for addressing the needs of academics in higher education institutions in Algeria in order to adopt the e-learning approach as a strategy to improve quality of education. The paper will report results of an empirical study that measures the readiness of the Algerian higher education institutions towards the implementation of ICT in the educational process and the attitudes of faculty members towards the application of the e-learning approach in engineering education. Three main objectives were targeted, namely: (a) to provide an initial evaluation of faculty members' attitudes and perceptions towards web-based education; (b) reporting on their perceived requirements for implementing e-learning in university courses; (c) providing an initial input for a collaborative process of developing an institutional strategy for e-learning. Statistical analysis of the survey results indicates that the Algerian higher education institution, which adopted the Licence - Master and Doctorate educational system, is facing a big challenge to take advantage of emerging technological innovations and the advent of e-learning to further develop its teaching programmes and to enhance the quality of education in engineering fields. The successful implementation of this modern approach is shown to depend largely on a set of critical success factors that would include: 1. The extent to which the institution will adopt a formal and official e-learning strategy. 2. The extent to which faculty members will adhere and adopt this strategy and develop ownership of the various measures in the

  11. Quality audits of radiotherapy centres in Latin America: a pilot experience of the International Atomic Energy Agency

    International Nuclear Information System (INIS)

    Rosenblatt, Eduardo; Zubizarreta, Eduardo; Izewska, Joanna; Binia, Sergio; Garcia-Yip, Fernando; Jimenez, Pablo

    2015-01-01

    In Latin America radiotherapy quality varies significantly among hospitals, where highly equipped academic centers coexist with others not meeting minimal requirements. In 2007, the International Atomic Energy Agency published guidelines for auditing radiotherapy centers, known as the “Quality Assurance Team for Radiation Oncology” (QUATRO) audits. The present report summarizes a pilot experience with QUATRO audits to 12 radiotherapy centres. The findings from QUATRO audits conducted in 12 radiotherapy centres in Latin America between 2008 and 2013 were analysed. Events representing weaknesses or gaps in the process of radiotherapy were recorded. Relevant data for estimating human and technological needs of visited centres were processed. The main difficulties and strengths faced by institutions were also documented. All 12 radiotherapy centres were successfully audited following the QUATRO method. IAEA provided a dosimetry kit for quality control. Forty percent of audited institutions were immersed in a health system that did not recognize cancer as a public health priority problem. With few exceptions, local training programs for physicists and technologists were scarce and research was not an activity of interest among physicians. Centres were provided with sufficient staff to meet the local demand, both in the case of radiation oncologists, physicists and radiation therapists. Three centres lacking the minimum infrastructure were identified. Three institutions did not perform gynaecological brachytherapy, and one installation delivered around 900 teletherapy treatments annually without simulation, planning or dosimetry equipment for that purpose. Recommendations to centres were classified as related to personnel, infrastructure, processes and institutional organizational aspects. Many recommendations warned governments about the evident need for allocating more budgetary resources to radiotherapy. Most recommendations pointed out different aspects related

  12. Program Officer | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Liaises with program colleagues in Ottawa and the regional offices on issues of project development and management;; Assists senior team members in the identifying, developing and managing IDRC's contacts with other international agencies and Canadian institutions;; Contributes to Centre-wide public relations efforts ...

  13. Scientific and technical publications of Juelich Research Centre, January 1988-June 1992

    International Nuclear Information System (INIS)

    1992-01-01

    The scientific and technical publications of Juelich Research Centre from January 1988 through June 1992 are listed under the following headings: General publications; Mathematics, computers, cybernetics; General physics; Atomic and nuclear physics; Solid state physics; Materials; Analytical chemistry; Engineering; Reactor Engineering; Metrology; Biology; Biotechnology; Agriculture; Energy; Medicine; Ecology; Plasma physics and fusion reactor technology; Physico-chemistry; Nuclear chemistry and radiochemistry; Chemical engineering; Electrical engineering, electronics; Geosciences. There is an author's index with report numbers (JUEL-, JUEL-BIBL-, JUEL-CONF, JUEL-SPEZ). (orig./BBR) [de

  14. Exploring the experiences of female students in introductory project-based engineering courses at two- and four-year institutions

    Science.gov (United States)

    Swan, Amy K.

    2011-12-01

    This qualitative study explored the experiential and contextual factors that shaped female students' pathways into introductory project-based engineering classes at two community colleges and one four-year institution, as well as female students' experiences within and outside of these classes. The study was framed by Social Cognitive Career Theory (SCCT) (Lent, Brown & Hackett, 1996) and Bronfenbrenner's (1979) ecological systems theory. Findings were based on analyses of data gathered through multiple methods: observations; individual interviews with female students; focus group interviews with project teams; and document collection. The findings of this study revealed that while positive experiences with math or science were a likely pre-cursor to engineering interest, experiential learning appeared to be a more powerful force in fostering students' engineering interest. Specifically, participants developed an interest in engineering through academic, professional, and extracurricular engineering- and design-related activities that familiarized them with the tasks and skills involved in engineering work and helped them develop a sense of selfefficacy with regard to this work. Interest and self-efficacy, in turn, played a role in students' postsecondary educational decision-making processes, as did contextual factors including families and finances. This study's findings also showed that participants' project teams were a critically important microsystem within participants' ecological environments. Within this sometimes "chilly" microsystem, female students negotiated intrateam processes, which were in some cases affected by gender norms. Intrateam processes that influenced female students' project-based learning experiences included: interpersonal dynamics; leadership; and division of labor. This study also identified several ways in which the lived experiences of participants at the community colleges were different from, or similar to, those of participants

  15. Engineering and management experience at Texas A&M Transportation Institute

    Science.gov (United States)

    Chowdhury, Arif Tahjibul

    This manuscript presents the author's engineering and management experience during his internship in the Materials and Pavements (M&P) Division at the Texas A&M Transportation Institute (TTI), and is a record of study for the Doctor of Engineering at Texas A&M University. Through this internship, he met his established internship objectives of gaining technical knowledge as well as knowledge and skills in project management, organizational communication, and quality management of pavement condition data, and of attaining professional development. In meeting these objectives, the author describes the history, mission, and organizational structure of his workplace. He also presents his experience of developing and delivering a two-week training course on pavement design and construction in Kosovo. Participating in a number of professional development training courses and other activities prepared him for working as an engineering manager. These activities include Delta-T leadership training, an instructor development course, a time management and organizational skills course, and the M&P Division lecture series. Leadership and skills learned through the Delta-T program were beneficial for the employee as well as the employer. For the class project, the author and his teammates performed a study dealing with improving TTI's deliverables. The Delta-T team composed a report summarizing their efforts of examining the current state of TTI's project deliverables, the deliverables' shortcomings, and potential enhancements to expand the deliverables' appeal to additional types of potential users outside the traditional research community. The team also developed a prototype web-based model of deliverables and presented some implementation recommendations. Participating in the Texas Department of Transportation's (TxDOT's) pavement surface distress data collection program enabled the author to become familiar with pavement distress data quality management and thus attain the

  16. Framework for ethical decision-making based on mission, vision and values of the institution.

    Science.gov (United States)

    Kotalik, Jaro; Covino, Cathy; Doucette, Nadine; Henderson, Steve; Langlois, Michelle; McDaid, Karen; Pedri, Louisa M

    2014-06-01

    The authors led the development of a framework for ethical decision-making for an Academic Health Sciences Centre. They understood the existing mission, vision, and values statement (MVVs) of the centre as a foundational assertion that embodies an ethical commitment of the institution. Reflecting the Patient and Family Centred Model of Care the institution is living, the MVVs is a suitable base on which to construct an ethics framework. The resultant framework consists of a set of questions for each of the MVVs. Users of the framework are expected to identify two or more possible decisions to address the issue at hand and then, by applying the provided sequence of questions to each, examine these options and determine the overall ethically preferable decision. The construction of such a framework requires the creative involvement of the institution's staff. Thus the development of the framework can represent a training process in ethical decision-making as well as advance the ethical atmosphere of the institution. This novel approach has the advantage of placing the MVVs on active duty, at the centre of ethical decision-making, and lifts it from its otherwise relative obscurity in most institutions.

  17. Annual report 1991. Environment Institute

    International Nuclear Information System (INIS)

    1992-01-01

    This is the annual report of the Environment Institute of the Joint Research Centre - Ispra Site - of the Commission of the European Communities. The report summarizes the progress accomplished in the course of 1991 - i.e. the last of the four year (1988-91) Specific Research Programme of the Joint Research Centre - in the projects tackled by the Institute. The activities were mainly focused on the areas of environmental chemicals, air pollution, water pollution, chemical waste and food and drug analysis, included in the programme Environmental Protection, and of safety assessment of nuclear waste disposal in geological formation as a part of the Radioactive Waste Management programme. The scientific support provided to different Commission Services is also described, proper emphasis being given to that provided to the Directorate General Xl (Environment, Nuclear Safety and Civil Protection) in the field of chemicals, air pollution, water pollution, chemical waste and radioactive environmental monitoring (REM). The above activities are aimed at the implementation of EC directives in the related fields. The work for third parties and the contribution of the Institute to various EUREKA and COST projects are also shortly described. Lastly the report provides essential data concerning the Institute structure and the human and financial resources

  18. Jacobs Engineering Group Inc. receives architectural and engineering design contract from Stanford Linear Accelerator Centre

    CERN Multimedia

    2004-01-01

    "Jacobs Engineering Group Inc. announced that a subsidiary company won a contract from Stanford Linear Accelerator Center (SLAC), to provide architectural and engineering design services for the Linac Coherent Light Source (LCLS) conventional facilities" (1/2 page)

  19. Homi Bhabha Centre for Science Education Tata Institute of ...

    Indian Academy of Sciences (India)

    Tata Institute of Fundamental Research (A Deemed University) ... level • Innovative curricula, laboratories, teaching and assessment methods • Development ... subject), M Tech or a Master's degree (MA/MSW) in any of the social/ behavioural.

  20. Active Learning in Engineering Education: A (Re)Introduction

    Science.gov (United States)

    Lima, Rui M.; Andersson, Pernille Hammar; Saalman, Elisabeth

    2017-01-01

    The informal network "Active Learning in Engineering Education" (ALE) has been promoting Active Learning since 2001. ALE creates opportunity for practitioners and researchers of engineering education to collaboratively learn how to foster learning of engineering students. The activities in ALE are centred on the vision that learners…

  1. Next steps towards a Climate Innovation Centre in Ghana. Discussion Paper

    International Nuclear Information System (INIS)

    De Coninck, H.C.; Wuertenberger, L.; Akon-Yamga, G.

    2011-03-01

    A climate innovation centre is an institution aimed at enabling development through catalysing climate technology research, development, market creation and policy. This discussion paper discusses the possibilities, considerations and next steps for a Climate Innovation Centre (CIC) in Ghana based on new insights within the government of Ghana, a mapping of climate innovation in Ghana, new developments in the international climate negotiations and other multilateral processes, and analysis conducted by ECN. The conclusion is that a Climate Innovation Centre can fill significant gaps in climate resilient development in Ghana. It seems important that a Ghana CIC does not become yet another institution that focuses on basic research in the area of climate change. Rather, it should connect the dots of the Ghanaian climate innovation system and act as a knowledge facilitator, also for the private sector. Various models of climate innovation centres exist. Before choices are made for a model or a combination of models for Ghana, it is recommended to allow for a broad stakeholder process. The World Bank's infoDev programme could be a model for such a process. Such stakeholder engagement should be aligned with other policymaking processes on adaptation and low-carbon development, as well as related policy arenas, such as agriculture, transport, waste and energy.

  2. Next steps towards a Climate Innovation Centre in Ghana. Discussion Paper

    Energy Technology Data Exchange (ETDEWEB)

    De Coninck, H.C.; Wuertenberger, L. [ECN Policy Studies, Petten (Netherlands); Akon-Yamga, G. [Science and Technology Policy Research Institute STEPRI, Accra (Guinea)

    2011-03-15

    A climate innovation centre is an institution aimed at enabling development through catalysing climate technology research, development, market creation and policy. This discussion paper discusses the possibilities, considerations and next steps for a Climate Innovation Centre (CIC) in Ghana based on new insights within the government of Ghana, a mapping of climate innovation in Ghana, new developments in the international climate negotiations and other multilateral processes, and analysis conducted by ECN. The conclusion is that a Climate Innovation Centre can fill significant gaps in climate resilient development in Ghana. It seems important that a Ghana CIC does not become yet another institution that focuses on basic research in the area of climate change. Rather, it should connect the dots of the Ghanaian climate innovation system and act as a knowledge facilitator, also for the private sector. Various models of climate innovation centres exist. Before choices are made for a model or a combination of models for Ghana, it is recommended to allow for a broad stakeholder process. The World Bank's infoDev programme could be a model for such a process. Such stakeholder engagement should be aligned with other policymaking processes on adaptation and low-carbon development, as well as related policy arenas, such as agriculture, transport, waste and energy.

  3. AMS at the National Institute of Nuclear Physics and Engineering in Bucharest

    International Nuclear Information System (INIS)

    Stan-Sion, C.; Ivascu, M.; Plostinaru, D.; Catana, D.; Marinescu, L.; Radulescu, M.; Nolte, E.

    2000-01-01

    A new beam line and injector deck for AMS measurements have been built at the 8 MV tandem accelerator of the National Institute of Nuclear Physics and Engineering, Bucharest, Romania. The main components on the low-energy side are a high-current cesium sputter source, a 90 deg. injection magnet and a pre-acceleration stage. At the high-energy side the beam line is achromatic, consisting of two 90 deg. analysing magnets with mass energy product 120 MeV amu and a gas-filled ionization chamber. The system will be complete with a Wien filter and a multi-anode gas detector with time-of-flight discrimination. Presently, the AMS facility is undergoing tests and routine measurements are expected to start soon

  4. AMS at the National Institute of Nuclear Physics and Engineering in Bucharest

    Energy Technology Data Exchange (ETDEWEB)

    Stan-Sion, C. E-mail: stansion@ifin.nipne.ro; Ivascu, M.; Plostinaru, D.; Catana, D.; Marinescu, L.; Radulescu, M.; Nolte, E

    2000-10-01

    A new beam line and injector deck for AMS measurements have been built at the 8 MV tandem accelerator of the National Institute of Nuclear Physics and Engineering, Bucharest, Romania. The main components on the low-energy side are a high-current cesium sputter source, a 90 deg. injection magnet and a pre-acceleration stage. At the high-energy side the beam line is achromatic, consisting of two 90 deg. analysing magnets with mass energy product 120 MeV amu and a gas-filled ionization chamber. The system will be complete with a Wien filter and a multi-anode gas detector with time-of-flight discrimination. Presently, the AMS facility is undergoing tests and routine measurements are expected to start soon.

  5. Summary of research in applied mathematics, numerical analysis and computer science at the Institute for Computer Applications in Science and Engineering

    Science.gov (United States)

    1984-01-01

    Research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, numerical analysis and computer science during the period October 1, 1983 through March 31, 1984 is summarized.

  6. Development and application of characteristic database for uranium mining and metallurgy in the library of Beijing Research Institute of Chemical Engineering and Metallurgy

    International Nuclear Information System (INIS)

    Gao Renxi

    2012-01-01

    Beijing Research Institute of Chemical Engineering and Metallurgy (BRICEM) is a multi disciplinary comprehensive research institute engaged in uranium mining, engineering design and related material researches. After 53 years of researches and development, BRICEM has accumulated a plenty of valuable data and resources. By analyzing the actual conditions of BRICEM's technological database, this thesis aims to propose the idea of building a characteristic database for uranium mining and metallurgy. It gives an in-depth analysis on content design, development status and problems of database development, in order to come up with solutions to these problems, as well as suggestions on the future development plans of the characteristic database. (author)

  7. An Introduction to Sustainable Development in the Engineering Curriculum

    OpenAIRE

    Penlington, Roger; Steiner, Simon

    2014-01-01

    This resource was originally created by The Higher Education Academy Engineering Subject Centre. Authored by Roger Penlington and Simon Steiner, the Guide has been updated and is now released by the Centre for Engineering and Design Education at Loughborough University [http://cede.lboro.ac.uk] as an online resource with a companion resource compendium. This guide is intended to stimulate thought and consideration amongst those who: as members of teaching staff, may wish to introduce EngSD in...

  8. STUDENT RETENTION IN AN ERA OF GLOBALIZATION:A case study of IGNOU Regional Centre, Mumbai

    Directory of Open Access Journals (Sweden)

    M. RAJESH

    2011-04-01

    Full Text Available Student Retention is a function of a number of factors, the most important among them being-the academic response mechanism of an institution, effectiveness in handling administrative queries, counseling at learner support centres, effectiveness in handling practical session and so on. The current paper is an attempt to study the effectiveness of student support services in an era of globalization in distance education institutions, with special reference to IGNOU Regional Centre, Mumbai. It is strongly felt that the results of this study will have a strong bearing on the way support services at conducted at Distance Education institutions. Mathematical complexity has been purposively avoided to make the contents of this paper intelligible to a wider audience.

  9. Source of hope [El Salvador’s only brachytherapy centre

    International Nuclear Information System (INIS)

    Falcon Castro, Nancy

    2010-01-01

    Set up in 2008 with the IAEA’s support, the Cancer Institute 'Dr. Narciso Diaz Bazan' is El Salvador’s only brachytherapy treatment facility for women affected by uterine cancer. To date, over 1000 women affected by cervical cancer have received treatment in the centre

  10. Role of the national INIS centre in the knowledge preservation programme

    International Nuclear Information System (INIS)

    Rashkova, N.; Georgieva, A.

    2004-01-01

    Possible ways of involvement of a small INIS Centre (on the example of the Bulgarian Centre) in the IAEA Knowledge Preservation Programme are discussed. The specific of the INIS activities, experience, and established access to scientific resources in the country present a good base for the extension of the Centre's functions towards nuclear knowledge accumulation and providing information about research and training programmes, as well as access to factual information in the nuclear field. Approaches for organising of the resources identification and developing of tools for management of information not included in the INIS database are suggested. As a first step, Bulgarian INIS Centre has identified some of the areas with accumulated knowledge as well as universities and institutes with valuable ongoing research. A local database for technical and scientific documentation is under development. (authors)

  11. Laser writing of coherent colour centres in diamond

    Science.gov (United States)

    Chen, Yu-Chen; Salter, Patrick S.; Knauer, Sebastian; Weng, Laiyi; Frangeskou, Angelo C.; Stephen, Colin J.; Ishmael, Shazeaa N.; Dolan, Philip R.; Johnson, Sam; Green, Ben L.; Morley, Gavin W.; Newton, Mark E.; Rarity, John G.; Booth, Martin J.; Smith, Jason M.

    2017-02-01

    Optically active point defects in crystals have gained widespread attention as photonic systems that could be applied in quantum information technologies. However, challenges remain in the placing of individual defects at desired locations, an essential element of device fabrication. Here we report the controlled generation of single negatively charged nitrogen-vacancy (NV-) centres in diamond using laser writing. Aberration correction in the writing optics allows precise positioning of the vacancies within the diamond crystal, and subsequent annealing produces single NV- centres with a probability of success of up to 45 ± 15%, located within about 200 nm of the desired position in the transverse plane. Selected NV- centres display stable, coherent optical transitions at cryogenic temperatures, a prerequisite for the creation of distributed quantum networks of solid-state qubits. The results illustrate the potential of laser writing as a new tool for defect engineering in quantum technologies, and extend laser processing to the single-defect domain.

  12. 7 March 2013 -Stanford University Professor N. McKeown FREng, Electrical Engineering and Computer Science and B. Leslie, Creative Labs visiting CERN Control Centre and the LHC tunnel with Director for Accelerators and Technology S. Myers.

    CERN Multimedia

    Anna Pantelia

    2013-01-01

    7 March 2013 -Stanford University Professor N. McKeown FREng, Electrical Engineering and Computer Science and B. Leslie, Creative Labs visiting CERN Control Centre and the LHC tunnel with Director for Accelerators and Technology S. Myers.

  13. Institutional and Actor-Oriented Factors Constraining Expert-Based Forest Information Exchange in Europe: A Policy Analysis from an Actor-Centred Institutionalist Approach

    Directory of Open Access Journals (Sweden)

    Tanya Baycheva-Merger

    2018-03-01

    Full Text Available Adequate and accessible expert-based forest information has become increasingly in demand for effective decisions and informed policies in the forest and forest-related sectors in Europe. Such accessibility requires a collaborative environment and constant information exchange between various actors at different levels and across sectors. However, information exchange in complex policy environments is challenging, and is often constrained by various institutional, actor-oriented, and technical factors. In forest policy research, no study has yet attempted to simultaneously account for these multiple factors influencing expert-based forest information exchange. By employing a policy analysis from an actor-centred institutionalist perspective, this paper aims to provide an overview of the most salient institutional and actor-oriented factors that are perceived as constraining forest information exchange at the national level across European countries. We employ an exploratory research approach, and utilise both qualitative and quantitative methods to analyse our data. The data was collected through a semi-structured survey targeted at forest and forest-related composite actors in 21 European countries. The results revealed that expert-based forest information exchange is constrained by a number of compound and closely interlinked institutional and actor-oriented factors, reflecting the complex interplay of institutions and actors at the national level. The most salient institutional factors that stand out include restrictive or ambiguous data protection policies, inter-organisational information arrangements, different organisational cultures, and a lack of incentives. Forest information exchange becomes even more complex when actors are confronted with actor-oriented factors such as issues of distrust, diverging preferences and perceptions, intellectual property rights, and technical capabilities. We conclude that expert-based forest information

  14. NATO Advanced Study Institute on Synthetic Membranes : Science, Engineering and Applications

    CERN Document Server

    Lonsdale, H; Pinho, M

    1986-01-01

    The chapters in this book are based upon lectures given at the NATO Advanced Study Institute on Synthetic Membranes (June 26-July 8, 1983, Alcabideche, Portugal), which provided an integrated presentation of syn­ thetic membrane science and technology in three broad areas. Currently available membrane formation mechanisms are reviewed, as well as the manner in which synthesis conditions can be controlled to achieve desired membrane structures. Membrane performance in a specific separa­ tionprocess involves complex phenomena, the understanding of which re­ quires a multidisciplinary approach encompassing polymer chemistry, phys­ ical chemistry, and chemical engineering. Progress toward a global understanding of membrane phenomena is described in chapters on the principles of membrane transport. The chapters on membrane processes and applications highlight both established and emerging membrane processes, and elucidate their myriad applications. It is our hope that this book will be an enduring, comprehensi...

  15. Centre de la Manche institutional control period: after the first safety review - 59236

    International Nuclear Information System (INIS)

    Dutzer, Michel; Vervialle, Jean Pierre; Andre, Alain; Marchiol, Albert

    2012-01-01

    Centre de la Manche disposal facility is the first French surface disposal facility dedicated to low and intermediate level short lived radioactive waste. It started up in 1969. After a continuous improvement, in the design of disposal vaults, in operational modes, in the whole process of waste management, in the safety approach, the last packages were received in 1994. 527, 000 m 3 of waste packages have been disposed during the 25 years of operation. The facility was licensed for the institutional control period in 2003. The disposal vaults are covered with a multilayer capping system that includes a bituminous membrane to provide protection against rainwater infiltration. Water that might infiltrate through the membrane is collected by the bottom slab of the vaults to a pipe network implemented in an underground gallery. Measurements show an overall infiltration rate of about 3 l/m 2 /year that complies with the objective of Andra of a few liters per square meter and per year. Investigations are performed in order to assess the behavior of the membrane in the long term. For this purpose periodically samples of the bituminous membrane are taken and measurements are performed. As at the beginning of the operational period waste packages were not conditioned in accordance with the specifications that are presently prescribed to waste generators, some settlements can be observed on the ancient part or the facilities. At the end of 2009 some excavation works were performed in an area where a settlement of few tens of centimeters was observed. The integrity of the membrane could be observed and the adequacy of the selection of this option for the water-tightness of the capping system was so confirmed. Environmental monitoring includes radiological and chemical measurements for discharge, underground water and surface water. In the particular framework of Centre de la Manche, a contamination of groundwater by tritiated wastes occurred in 1976. Theses wastes were

  16. Evolution of nuclear spectroscopy at Saha Institute of Nuclear Physics

    Indian Academy of Sciences (India)

    1990 to date a variety of medium energy heavy ions were made available from the BARC-TIFR Pel- letron and the Nuclear Science Centre Pelletron. The state of the art gamma detector arrays in these centres enabled the Saha Institute groups to undertake more sophisticated experiments. Front line nuclear spectroscopy ...

  17. CONFERENCES AND SYMPOSIA: Commemoration of the centenary of the birth of Academician L A Artsimovich(Scientific session of the Physical Sciences Division of the Russian Academy of Sciences, 18 February 2009; Joint session of the Research Council of the Russian Research Centre 'Kurchatov Institute', the Presidium of the Russian Academy of Sciences, and the Rosatom State Corporation, 18 March 2009)

    Science.gov (United States)

    Khalatnikov, Isaak M.; Fortov, Vladimir E.; Makarov, Aleksandr A.; Fridman, Aleksei M.; Martynenko, Yurii V.

    2009-12-01

    The scientific session of the Physical Sciences Division of the Russian Academy of Sciences (RAS) devoted to the centenary of the birth of Academician L A Artsimovich was held on 18 February 2009 in the conference hall of the P N Lebedev Physical Institute, RAS. The following reports were presented at the session: (1) Khalatnikov I M (L D Landau Institute of Theoretical Physics, RAS, Chernogolovka, Moscow region) "Nonaccidental coincidences (Lev Andreevich Artsimovich)"; (2) Pashinin P P (A M Prokhorov Institute of General Physics, RAS, Moscow) "L A Artsimovich and inertial thermonuclear fusion"; (3) Fortov V E (Institute of Thermophysics of Extreme States of the Joint Institute for High Temperatures, RAS, Moscow) "High-power shock waves and extreme states of plasma"; (4) Fridman A M (Institute of Astronomy, RAS, Moscow) "Prediction and discovery of ultrastrong hydrodynamic instabilities caused by a velocity jump: theory and experiment"; (5) Smirnov V P (Russian Research Centre 'Kurchatov Institute', Moscow) "Retracing Artsimovich's path to the thermonuclear source of energy". On 18 March 2009, a joint session of the Learned Council of the Russian Research Centre 'Kurchatov Institute' (RNTsKI in Russ. abbr.), the Presidium of the Russian Academy of Sciences, and the Rosatom State Corporation took place at RNTsKI; the session was devoted to the 100th anniversary of the birth of Academician L A Artsimovich. The following talks were presented at the session: (1) Velikhov E P (Russian Research Centre 'Kurchatov Institute', Moscow) "Academician L A Artsimovich—the founder of our field of science and industry"; (2) Smirnov V P (Russian Research Centre 'Kurchatov Institute', Moscow) "Retracing Artsimovich's path to the thermonuclear source of energy"; (3) Boyarchuk A A (Division of General Physics and Astronomy, RAS, Moscow) "L A Artsimovich and astronomy"; (4) Martynenko Yu V (Institute of Nuclear Fusion, Russian Research Centre 'Kurchatov Institute', Moscow

  18. WISB: Warwick Integrative Synthetic Biology Centre.

    Science.gov (United States)

    McCarthy, John

    2016-06-15

    Synthetic biology promises to create high-impact solutions to challenges in the areas of biotechnology, human/animal health, the environment, energy, materials and food security. Equally, synthetic biologists create tools and strategies that have the potential to help us answer important fundamental questions in biology. Warwick Integrative Synthetic Biology (WISB) pursues both of these mutually complementary 'build to apply' and 'build to understand' approaches. This is reflected in our research structure, in which a core theme on predictive biosystems engineering develops underpinning understanding as well as next-generation experimental/theoretical tools, and these are then incorporated into three applied themes in which we engineer biosynthetic pathways, microbial communities and microbial effector systems in plants. WISB takes a comprehensive approach to training, education and outreach. For example, WISB is a partner in the EPSRC/BBSRC-funded U.K. Doctoral Training Centre in synthetic biology, we have developed a new undergraduate module in the subject, and we have established five WISB Research Career Development Fellowships to support young group leaders. Research in Ethical, Legal and Societal Aspects (ELSA) of synthetic biology is embedded in our centre activities. WISB has been highly proactive in building an international research and training network that includes partners in Barcelona, Boston, Copenhagen, Madrid, Marburg, São Paulo, Tartu and Valencia. © 2016 The Author(s).

  19. Proceedings of the Scientific Meeting in Nuclear Instrumentation Engineering

    International Nuclear Information System (INIS)

    Achmad Suntoro; Rony Djokorayono; Ferry Sujatno; Utaja

    2010-11-01

    The Proceeding of the Scientific Meeting in Nuclear Instrumentation Engineering held on Nov, 30, 2010 by the Centre for Nuclear Instrumentation Engineering - National Nuclear Energy Agency. The Proceedings of the Scientific Contains 40 papers Consist of Nuclear Instrumentation Engineering for Industry, Environment, and Nuclear Facilities. (PPIKSN)

  20. Transnational Corporations and Local Innovation | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    25 sept. 2013 ... ... les ressources humaines, les structures du marché et l'innovation et le développement ... Dinesh Abrol est scientifique en chef au National Institute of Science, ... Le Centre de recherches pour le développement international est ... ont conclu un accord de coopération scientifique et technologique en ...

  1. Progress report: Variable Energy Cyclotron Centre, Calcutta

    International Nuclear Information System (INIS)

    1999-01-01

    This volume of the progress report brings out the scientific and technical activities of Variable Energy Cyclotron Centre, Calcutta during the year 1999. This includes brief review of the various R and D activities of the Centre and outside users of the cyclotron from the universities and other research institutes. The operational activities of the cyclotron with ECR ion sources, accelerator oriented research activities, activities on detector, target and electronics are reported. The activities of the Computer and Informatics group are described. The status report of the ongoing projects is also provided. The main activities of the superconducting cyclotron project, radioactive ion beam project, heavy ion experimental facility, advanced computational facility, recovery and analysis of helium from hot springs and material science research are described

  2. Niger institute focuses on financial accountability | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    28 avr. 2016 ... ... of its budgeting and reporting systems, and in staff morale. It plans further efforts to improve internal communications and achieve greater visibility. Read the story of change, Renewing financial management systems: Institut National de la Recherche Agronomique du Niger (PDF, 95 KB, in French only) ...

  3. Summary of research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, numerical analysis and computer science

    Science.gov (United States)

    1989-01-01

    Research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, numerical analysis, and computer science during the period October 1, 1988 through March 31, 1989 is summarized.

  4. Plant Poisonings According to the Czech Toxicological Information Centre from 2005 to 2008

    Czech Academy of Sciences Publication Activity Database

    Říčařová, B.; Rakovcová, H.; Pelclová, D.; Navrátil, Tomáš

    2009-01-01

    Roč. 47, č. 5 (2009), s. 473-473 ISSN 1556-3650. [The International Congress of the European Association of Poison Centres and Clinical Toxicologists /29./. 12.05.2009-15.05.2009, Stockholm] R&D Projects: GA AV ČR IAA400400806 Institutional research plan: CEZ:AV0Z40400503 Keywords : Czech Toxicological Information Centre * plant poison ings according Subject RIV: CF - Physical ; Theoretical Chemistry

  5. Decomobil, Deliverable 3.6, Human Centred Design for Safety Critical Transport Systems

    OpenAIRE

    PAUZIE, Annie; MENDOZA, Lucile; SIMOES, Anabela; BELLET, Thierry; MOREAU, Fabien

    2014-01-01

    The scientific seminar on 'Human Centred Design for Safety Critical Transport Systems' organized in the framework of DECOMOBIL has been held the 8th of September 2014 in Lisbon, Portugal, hosted by ADI/ISG. The aims of the event were to present the scientific problematic related to the safety of the complex transport systems and the increasing importance of human-­centred design, with a specific focus on Resilience Engineering concept, a new approach to safety management in highly complex sys...

  6. Completeness and overlap in open access systems: Search engines, aggregate institutional repositories and physics-related open sources.

    Science.gov (United States)

    Tsay, Ming-Yueh; Wu, Tai-Luan; Tseng, Ling-Li

    2017-01-01

    This study examines the completeness and overlap of coverage in physics of six open access scholarly communication systems, including two search engines (Google Scholar and Microsoft Academic), two aggregate institutional repositories (OAIster and OpenDOAR), and two physics-related open sources (arXiv.org and Astrophysics Data System). The 2001-2013 Nobel Laureates in Physics served as the sample. Bibliographic records of their publications were retrieved and downloaded from each system, and a computer program was developed to perform the analytical tasks of sorting, comparison, elimination, aggregation and statistical calculations. Quantitative analyses and cross-referencing were performed to determine the completeness and overlap of the system coverage of the six open access systems. The results may enable scholars to select an appropriate open access system as an efficient scholarly communication channel, and academic institutions may build institutional repositories or independently create citation index systems in the future. Suggestions on indicators and tools for academic assessment are presented based on the comprehensiveness assessment of each system.

  7. The warped young stellar disc in the Galactic centre

    Czech Academy of Sciences Publication Activity Database

    Šubr, Ladislav; Schovancová, J.; Kroupa, P.

    2009-01-01

    Roč. 496, č. 3 (2009), s. 695-699 ISSN 0004-6361 R&D Projects: GA ČR GA205/07/0052 Institutional research plan: CEZ:AV0Z10030501 Keywords : black holes * galactic centre Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 4.179, year: 2009

  8. The Galactic centre mini-spiral in the mm-regime

    Czech Academy of Sciences Publication Activity Database

    Kunneriath, Devaky; Eckart, A.; Vogel, S. N.; Teuben, P.; Muzic, K.; Schoedel, R.; García-Marín, M.; Moultaka, J.; Staguhn, J.; Straubmeier, C.; Zensus, J. A.; Valencia-S, M.; Karas, Vladimír

    2012-01-01

    Roč. 538, February (2012), A127/1-A127/8 ISSN 0004-6361 Grant - others:ESA(XE) ESA-PECS project No. 98040 Institutional research plan: CEZ:AV0Z10030501 Keywords : galactic centre * black holes Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 5.084, year: 2012

  9. A Design-Based introduction to learning centres

    Directory of Open Access Journals (Sweden)

    Anne Kristine Petersen

    2016-05-01

    Full Text Available In the last decades, outskirt areas in Denmark have suffered from depopulation and economic decline, a development that has led to a centralised education system where higher education institutions are vested in a central body in urban areas rather than in rural communities. University College Zealand has initiated a research project in collaboration with three municipalities in the region of Zealand and partners from the Nordic countries, which investigates the potential of municipal learning centres as a means to solve educational challenges in outskirt areas. A municipal learning centre is a physical location owned by a municipality, which offers (asynchronous courses through digital couplings to higher education institutions. The paper presents research findings showing that the development of an ecosystem based on collaboration between municipalities, higher education institutions and private and public businesses is pivotal for achieving a sustainable model for online education in rural areas. Furthermore, the paper presents a series of thinking technologies in the form of models and categories, which can be used as tools for establishing learning centres and designing learning activities for learning centres. --- Kommuner placeret i yderområder i Danmark har i de seneste årtier oplevet affolkning og økonomisk nedgang, og denne udvikling har medvirket til et centraliseret uddannelsessystem, hvor videregående uddannelsesinstitutioner flyttes fra yderområder til større byer. University College Sjælland har igangsat et forskningsprojekt i samarbejde med tre kommuner i Region Sjælland og partnere fra de nordiske lande, som har til formål at undersøge hvorvidt uddannelseskonceptet kommunale læringscentre kan medvirke til at løse uddannelsesudfordringer i landets yderområder. Et kommunalt læringscenter er en fysisk lokation som ejes af en kommune, som gennem læringscenteret kan give borgere mulighed for at tage et kursus eller en

  10. Nuclear Human Resource Development in Tokyo Institute of Technology

    International Nuclear Information System (INIS)

    Satio, Masaki; Igashira, Masayuki; Obara, Toru; Kikura, Hironari; Kawahara, Akira; Ujita, Hiroshi

    2012-01-01

    Nuclear engineering education has been initiated in 1957 at the graduate school of Tokyo Institute of Technology. Higher Educational activities have been conducted for more than half century. More than 1000 Master students and 200 Doctoral students graduated from the Department of Nuclear Engineering in Tokyo Institute if Technology. Many of them are working in nuclear industries and institutes. International course of nuclear engineering was initiated in 1994, and 130 students from 20 overseas countries have graduated from Master and Doctoral Programs. In the present paper, the current nuclear educational activities in Tokyo Institute of Technology are summarized

  11. Skoda Concern's cooperation with State Machinery Design Research Institute

    International Nuclear Information System (INIS)

    Valchar, J.; Kuhn, L.

    1988-01-01

    The main areas are presented of cooperation between the Skoda Plzen Concern and the State Machinery Design Research Institute in Prague-Bechovice. This is mainly the development of steam turbines, from 50 MW turbines to the present 1000 MW saturated steam turbines designed for nuclear power plants. Main attention is centred on conditions of the boiling crisis in the steam turbine circuit, and its consequences. This study is served by the experimental equipment of the institute and its computer. The cooperation of the two institutions in the field of testing and diagnostic equipment is centred on measuring natural oscillations of turbine blades, the diagnostics of vibrations of steam turbines, the measurement of the humidity of saturated steam, optical measurements of the parameters of saturated steam, ultrasound diagnostics and the measurement of turbine blade deformation caused by hydraulic effects. (Z.M.). 8 figs

  12. Illuminating Engineering Research Institute Annual Report 1967. A Review of Project Activities and a Roundup of IERI Research Interests.

    Science.gov (United States)

    Illuminating Engineering Research Inst., New York, NY.

    Presented in this report are the Illuminating Engineering Research Institute's fundamental scientific concepts in a new frame of realism while relating them to an up-to-date accounting of the search for new basic knowledge. In addition to being an annual accounting, it is also intended to provide orientation. Its presented in dramatic and…

  13. Welcoming speech from Dean Faculty of Mechanical Engineering, UMP

    Science.gov (United States)

    Taha, Zahari

    2012-09-01

    In the Name of Allah, the Most Beneficent, the Most Merciful. It is with great pleasure that I welcome the participants of the International Conference of Mechanical Engineering Research 2011. The Prophet Muhammad (peace be upon him) said 'Acquire knowledge and impart it to the people.' (Al Tirmidhi). The quest for knowledge has been from the beginning of time but knowledge only becomes valuable when it is disseminated and applied to benefit humankind. It is hoped that ICMER 2011 will be a platform to gather and disseminate the latest knowledge in mechanical engineering. Academicians, Scientist, Researchers and practitioners of mechanical engineering will be able to share and discuss new findings and applications of mechanical engineering. It is envisaged that the intellectual discourse will result in future collaborations between universities, research institutions and industry both locally and internationally. In particular it is expected that focus will be given to issues on environmental and energy sustainability. Researchers in the mechanical engineering faculty at UMP have a keen interest in technology to harness energy from the ocean. Lowering vehicle emissions has been a primary goal of researchers in the mechanical engineering faculty and the automotive engineering centre as well including developing vehicles using alternative fuels such as biodiesel and renewable sources such as solar driven electric vehicles. Finally I would like to congratulate the organizing committee for their tremendous efforts in organizing the conference. As I wrote this in the Holy Land of Makkah, I pray to Allah swt that the conference will be a success. Prof. Dr. Zahari Taha CEng, MIED, FASc Dean, Faculty of Mechanical Engineering Universiti Malaysia Pahang

  14. Transforming Systems Engineering through Model Centric Engineering

    Science.gov (United States)

    2017-08-08

    Contract No. HQ0034-13-D-0004 Report No. SERC-2017-TR-110 Date: August 8, 2017 Transforming Systems Engineering through Model-Centric... Engineering Technical Report SERC-2017-TR-110 Update: August 8, 2017 Principal Investigator: Mark Blackburn, Stevens Institute of Technology Co...Evangelista Sponsor: U.S. Army Armament Research, Development and Engineering Center (ARDEC), Office of the Deputy Assistant Secretary of Defense for

  15. Agents of Institutional Change in EU Policy

    DEFF Research Database (Denmark)

    de la Porte, Caroline; Natali, David

    2018-01-01

    Social Investment package (SIP) through issue-framing, institutional alignment and consensus-building. Despite this, the SIP of 2013 ended as a ‘social investment moment’ that rapidly lost momentum because no additional measures such as indicators or funds were integrated with SIP. Furthermore......The contribution addresses – through actor-centred historical institutionalism – why and how social investment (SI) emerged at the European Union (EU) level. SI policies built on the institutional basis of the policy co-ordination processes in employment and social inclusion, which originated...

  16. Sri Lanka : tous les projets | Page 5 | CRDI - Centre de recherches ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Sujet: Internet, LANGUAGE BARRIER, ASIAN LANGUAGES, COMPUTER PROGRAMS, SOFTWARE ENGINEERING, INFORMATION SOCIETY. Région: ... Les télécentres et autres projets locaux de technologies de l'information et de la communication (TIC) ont connu une croissance exceptionnelle au Sri Lanka. Date de ...

  17. Let's Talk! ESL Students' Needs and Writing Centre Philosophy

    Science.gov (United States)

    Moussu, Lucie

    2013-01-01

    When university/college faculty members believe that ESL students' writing skills are not equivalent to those of native speakers, they frequently send these ESL students to their institution's writing centres (WCs). However, this often results in frustration for WC staff, the students, and faculty members. This article first describes ESL…

  18. Success Stories in Asian Aquaculture | CRDI - Centre de recherches ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    13 oct. 2009 ... Sena S. De Silva is Director General of the Network of Aquaculture Centres in Asia- Pacific and Honorary Professor of Aquaculture and Fisheries Biology at the School of Life and Environmental Sciences, Deakin University, Victoria, Australia. F. Brian Davy is Senior Fellow at the International Institute for ...

  19. The Australian Institute of Nuclear Science and Engineering - a model for university-national laboratory collaboration

    International Nuclear Information System (INIS)

    Gammon, R.B.

    1994-01-01

    This paper describes the aims and activities of the Australian Institute of Nuclear Science and Engineering (AINSE), from its foundation in 1958 through to 1993. The philosophy, structure and funding of the Institute are briefly reviewed, followed by an account of the development of national research facilities at the Lucas Heights Research Laboratories, with particular emphasis on nuclear techniques of analyses using neutron scattering instruments and particle accelerators. AINSE's program of Grants, fellowships and studentships are explained with many examples given of projects having significance in the context of Australia's national goals. Conference and training programs are also included. The achievements during these years demonstrate that AINSE has been an efficient and cost-effective model for collaboration between universities and a major national laboratory. In recent years, industry, government organisations and the tertiary education system have undergone major re-structuring and rationalization. A new operational structure for AINSE has evolved in response to these changes and is described

  20. Contribution to the Proposal for the Formation of Regional Centres for Nuclear Physics in the Developing Countries

    Energy Technology Data Exchange (ETDEWEB)

    Alaga, G. [Institute ' ' Rudjer Bośković' ' , Zagreb, Yugoslavia (Croatia)

    1969-07-15

    The paper discusses the development of nuclear physics in developing countries, pointing out the difficulties of research in the future. A proposal for the formation of regional centres is put forward. Arguments justifying the formation of these regional centres are presented together with the suggestion that UNESCO and IAEA act as sponsors and financial supporters of the regional centres. The institutes in the developing countries could serve as a basis for such centres. Countries which are qualified and interested in having and using the facilities of the regional centres should also participate in the financing of them. (author)

  1. Status of the ETOILE centre at the end of 2010

    International Nuclear Information System (INIS)

    Balosso, J.; Pommier, P.; Wasmer, G.

    2011-01-01

    Since its last presentation during the National Institute of Radiological Sciences (NIRS)-ETOILE symposium of March 2009, the ETOILE project went through a series of steps that have altered its general organization but has consolidated its future. Many programmes have been pushed forward altogether, as previously announced. First, the tendering process developed as a tentative public-private partnership reached an unsuccessful end. This decision was made in full agreement with the administrative authorities. Second, the solution to include in the project a high-performance research facility capable of prolonging the present research programmes, as well as to attract and host visiting research teams was greatly improved. A dual-purpose centre, with mutualisation of the costs and resources, is now being proposed: the ETOILE Hadrontherapy Care Centre and the ETOILE Platform for Research and Development in Hadrontherapy (PRDH-ETOILE). This project was warmly welcomed by research and teaching institutions, and industrials. Third, the governmental health authorities gained full and satisfactory information through a long process of evaluation and negotiation and issued, in October 2010, a set of recommendations to go ahead with this solution, among which: the ''green light'', of course, to launch a new tendering process with a public body project ownership; the engagement of the State to create a specific national public health centre to host the care activities and to allow its funding through the health insurance system; the latter clause being granted provided the research part is auto-funded; the agreement to send an increasing number of patients to already existing carbon ion care centres abroad, in order to constitute a cohort of hadrontherapy cases in France, to begin treatments and studies, and later on training for the opening of the Centre. Thus, 2011 should be a very busy, and hopefully successful, year for ETOILE. (author)

  2. Bhabha Atomic Research Centre: annual report 1986-87

    International Nuclear Information System (INIS)

    1987-01-01

    The Research and Development (R and D) work and achievements of the Bhabha Atomic Research Centre, Bombay, during the financial year 1986-1987 are reported. The R and D activities of BARC cover the entire nuclear fuel cycle, production and use of radioisotopes, radiation protection and also basic research in several disciplines. The report is presented in the chapters entitled: Physical Sciences, Chemical Sciences, Materials and Materials Science, Life Sciences, Radioisotopes, Reactors, Fuel Cycle, Health and Safety, Electronics and Instrumentation, Engineering and General Services. At the end of each chapter are listed the journal articles published, the paper presented at conferences, symposia etc. and technical reports issued by the scientists of BARC in the subject field indicated by the title of the chapter. The R and D work of the outstation units of BARC, namely, Nuclear Research Laboratory at Srinagar, High Altitute Research Laboratory at Gulmarg, Variable Energy Cyclotron Centre at Calcutta and Gauribidanur Seismic Array near Bangalore are also described in the report. The report concludes with a brief account of: (1) transfer of technologies developed at the Centre, (2) activities related to human resource development for nuclear programmes of the country, and (3) progress of design and construction work of Centre for Advanced Technology at Indore. (M.G.B.)

  3. Understanding meaning and bridging divides: the use of an African metaphor for the South African Open Source Centre

    CSIR Research Space (South Africa)

    Byrne, E

    2006-07-01

    Full Text Available , University of South Africa (UNISA), Tshwane, South Africa 3. Open Source Centre (OSC), Meraka Institute, Centre for Scientific and Industrial Research (CSIR), Tshwane, South Africa * corresponding author: jollirm@unisa.ac.za Abstract This paper... illustrates how metaphors can be used in organizational change and how the use of a particular metaphor (meraka2) was used strategically to effect such a change in the Open Source Centre (OSC) at the Centre for Scientific and Industrial Research (CSIR...

  4. Monitoring the Galactic Centre with the Australia Telescope Compact Array

    Czech Academy of Sciences Publication Activity Database

    Borkar, A.; Eckart, A.; Straubmeier, C.; Kunneriath, Devaky; Jalali, B.; Sabha, N.; Shahzamanian, B.; García-Marín, M.; Valencia-S, M.; Sjouwerman, L.; Britzen, S.; Karas, Vladimír; Dovčiak, Michal; Donea, A.; Zensus, A.

    2016-01-01

    Roč. 458, č. 3 (2016), s. 2336-2349 ISSN 0035-8711 R&D Projects: GA ČR(CZ) GC13-00070J Institutional support: RVO:67985815 Keywords : galactic Centre * black hole Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 4.961, year: 2016

  5. [Research Conducted at the Institute for Computer Applications in Science and Engineering for the Period October 1, 1999 through March 31, 2000

    Science.gov (United States)

    Bushnell, Dennis M. (Technical Monitor)

    2000-01-01

    This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, computer science, fluid mechanics, and structures and materials during the period October 1, 1999 through March 31, 2000.

  6. The profile of the imprisoned minors in detention centres for offenders and the professionals who treat them: a descriptive study in the Tierras de Oria institution

    Directory of Open Access Journals (Sweden)

    Tomás Sola Martínez

    2009-05-01

    Full Text Available Although juvenile delinquency is a present matter in media since many years ago, the profile that defines both imprisoned minors in detention centres and proffesionals who treat them is still unknown for most of our society. This article aims for these profiles to be shown by means of a descriptive study carried out in the “Tierras de Oria” institution about the age, gender and education of both their inmates and the proffesionals who intervene in their re-education and guarantee their social and labour rehabilitation when they join our society.

  7. Cold chain status at immunisation centres in Ethiopia | Berhane ...

    African Journals Online (AJOL)

    Objective: To assess the status of the cold chain at peripheral vaccine stores in Ethiopia. Design: Institution based cross-sectional survey in two rural and one urban ... Complete temperature record was observed in 37(57.8%) of the centres. Thermometer was not available in four (6.3%) and thermometer reading was found ...

  8. Unified storage systems for distributed Tier-2 centres

    International Nuclear Information System (INIS)

    Cowan, G A; Stewart, G A; Elwell, A

    2008-01-01

    The start of data taking at the Large Hadron Collider will herald a new era in data volumes and distributed processing in particle physics. Data volumes of hundreds of Terabytes will be shipped to Tier-2 centres for analysis by the LHC experiments using the Worldwide LHC Computing Grid (WLCG). In many countries Tier-2 centres are distributed between a number of institutes, e.g., the geographically spread Tier-2s of GridPP in the UK. This presents a number of challenges for experiments to utilise these centres efficaciously, as CPU and storage resources may be subdivided and exposed in smaller units than the experiment would ideally want to work with. In addition, unhelpful mismatches between storage and CPU at the individual centres may be seen, which make efficient exploitation of a Tier-2's resources difficult. One method of addressing this is to unify the storage across a distributed Tier-2, presenting the centres' aggregated storage as a single system. This greatly simplifies data management for the VO, which then can access a greater amount of data across the Tier-2. However, such an approach will lead to scenarios where analysis jobs on one site's batch system must access data hosted on another site. We investigate this situation using the Glasgow and Edinburgh clusters, which are part of the ScotGrid distributed Tier-2. In particular we look at how to mitigate the problems associated with 'distant' data access and discuss the security implications of having LAN access protocols traverse the WAN between centres

  9. Transforming Systems Engineering through Model-Centric Engineering

    Science.gov (United States)

    2018-02-28

    Contract No. HQ0034-13-D-0004 Research Tasks: 48, 118, 141, 157, 170 Report No. SERC-2018-TR-103 Transforming Systems Engineering through...Model-Centric Engineering Technical Report SERC-2018-TR-103 February 28, 2018 Principal Investigator Dr. Mark Blackburn, Stevens Institute of...Systems Engineering Research Center This material is based upon work supported, in whole or in part, by the U.S. Department of Defense through the

  10. ExNum 2016 International Symposium on Experimental Methods and Numerical Simulation in Engineering Sciences

    Directory of Open Access Journals (Sweden)

    Editorial Foreword

    2016-12-01

    Full Text Available ExNum 2016International Symposium on Experimental Methods and Numerical Simulation in Engineering SciencesSeptember 18th - 21st, 2016Conference Centre Liblice, Liblice, Czech RepublicOrganized by:Institute of Theoretical and Applied Mechanics ASCR, v.v.i.Faculty of Transportation Sciences CTU in PragueBergische Universität Wuppertal, Faculty 5 - Architecture and Civil EngineeringThe International Symposium on Experimental Methods and Numerical Simulation in Engineering Sciences continues the tradition of the Czech-German bilateral symposium founded by prof. Karl-Hans Laermann and prof. Stanislav Holý in 1985. In the following years, the symposium was extensively developed by prof. Josef Jíra. The symposium shall bring together mainly young scientists who are actively involved in experimental solid mechanics, theoretically and practically, in order to exchange experience, to report on the present state-of-art as well as on running research projects, to discuss due questions and problems and to promote the co-operation between individuals as well as between institutions. Therefore in the symposium discussions will play a highly significant role.Scientific Committeeprof. Ing. Ondřej Jiroušek, Ph.D. (Institute of Theoretical and Applied Mechanics ASCR, v.v.i.Univ.-Prof. Dr.-Ing.Dr.h.c.mult. Karl-Hans Laermann (Bergische Universität WuppertalProf. Dr.- Ing. Reinhard Harte (Bergische Universität Wuppertal, Faculty 5 - Architecture and Civil EngineeringProf. Dr.-Ing. Marc Gutermann (Hochschule BremenIng. Daniel Kytýř, Ph.D. (Czech Technical University in Prague, Faculty of Transportation SciencesIng. Petr Zlámal, Ph.D. (Institute of Theoretical and Applied Mechanics ASCR, v.v.i.Local Organizing CommitteeTomáš DoktorTomáš FílaNela KrčmářováPetr KoudelkaVeronika KoudelkováDaniel KytýřJan ŠleichrtPetr ZlámalEditorsDaniel KytýřPetr ZlámalScientific GuidanceOndřej Jiroušek

  11. Developing a performance measurement system for public research centres

    Directory of Open Access Journals (Sweden)

    Masella, C.

    2012-01-01

    Full Text Available This study aims at developing a performance measurement system (PMS for research and development (R&D activities carried out by public research centres. Public research institutions are characterized by multiple stakeholders with different needs, and the management of R&D activities requires balancing the multiple goals of different stakeholders. This characteristic is a key issue in the process of construction of the PMS. Empirical evidence is provided by an Italian public research centre, where the researchers carried out a project aimed to develop a PMS following action research principles. This project gave the possibility to researchers to interact with different stakeholders and integrate their different information needs in a comprehensive set of key performance indicators (KPIs. As a result, multidimensional framework for measuring R&D performance in a public research centre is proposed and a set of Key Performance Indicators is developed, suggesting implications for academics and practitioners.

  12. The effects of networks on U.S. institution selection by foreign doctoral students in science and engineering

    Science.gov (United States)

    Tanyildiz, Zeynep Esra

    The United States has been a very attractive destination for foreign Science and Engineering (S&E) graduate students and postdoctoral scholars for a considerable period of time. Several studies have documented significant contributions of foreign students and foreign scientists in S&E. These contributions in turn foster economic development. Recent studies suggest, however, that the U.S. is losing its dominance in attracting foreign talent. Increased competition outside the U.S. contributes to the change as do changes in visa regulations. Despite the important role of foreign doctoral students in the U.S., relatively little is known about factors influencing their decision to attend an institution. One factor that is rarely explored is the effect of networks on institution selection. Through their networks, students learn about application procedures, studying at an institution, housing opportunities, general culture and people. In doing this, they draw both on the experience of the alumni as well as the support of current students and faculty at their target institution. Thus, networks can play an important role in where foreign doctoral students actually end up studying. This study aims to provide both qualitative and quantitative information about the role networks play in foreign doctoral students' institution selection. This three-part study utilizes different methodologies: (1) focus group interviews conducted with Turkish doctoral students at the Georgia Institute of Technology; (2) a web study of research laboratories in science and engineering; and (3) the estimation of Random Utility Model (RUM) of institution selection. These three components build on each other, in addition to the individual contributions that they make. Together they provide an in-depth and comprehensive analysis of the role of networks. The results from guided focus group interviews indicate that students, alumni, faculty and local community of the same nationality influence

  13. Situational Analysis of Engineering Practice

    DEFF Research Database (Denmark)

    Buch, Anders

    STS inspired studies of engineering work practices provide new material for a richer understanding of engineering culture. However, the specific and strictly situated focus of many of these studies threatens to limit discussions of engineering practices to departmental and discrete institutional...... settings. This micro perspective potentially overlooks the inherent and overarching normativities that inform engineering culture. Furthermore, the micro perspective has difficulties in transgressing institutional boundaries in order to investigate the dynamics of cultural reproduction in engineering....... The paper will propose a research agenda that – inspired by George Marcus’ multi-sited ethnographic methodology (Marcus 1998) and Adele Clarke’s situational analysis (Clarke 2005) – analyze (and contrasts) engineering practices in diverse settings (e.g. engineering education and engineering work) in order...

  14. Climate Innovation Centres. A global instrument with local benefits. Policy brief

    International Nuclear Information System (INIS)

    De Coninck, H.C.; Rivera Tinoco, R.A.

    2010-09-01

    A climate innovation centre is an institution aimed at enabling development through catalyzing climate technology research, development and market creation. What do technologies need to flourish and to contribute to sustainable economic development? Current research suggests that functioning markets, innovative capacities and the availability of appropriate technology in countries such as Ghana are key. In the climate negotiations, climate technology innovation centres, as well as an international network of them is in the process of agreement, providing opportunities for Ghana. This Policy Brief explains the considerations for a climate innovation centre in Ghana. It goes into the climate negotiations context, the practical choices for Ghana, gives examples of other countries, and outlines the next steps in the ECN Technical Assistance project.

  15. Underpricing and Firm’s Distance from Financial Centre: Evidence from three European Countries

    OpenAIRE

    Antonio Acconcia; Alfredo Del Monte; Luca Pennacchio

    2011-01-01

    We provide international evidence on the relationship between the extent of underpricing related to initial public offerings (IPOs) and the distance of the issuing firm from the financial centre of a country: for France, Germany and Italy, the higher the distance, the higher the level of underpricing. Under the maintained assumption that headquarters of institutional investors and underwriters are part of a financial centre, our evidence is consistent with the hypothesis that ex ante uncertai...

  16. City profile: Transformation and injustice in Mumbai | CRDI - Centre ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    13 déc. 2016 ... In this 2014 profile, researchers with the Tata Institute of Social Sciences Centre for Urban Policy and Governance provide a foundation for understanding the many faces of Mumbai, and how its relatively low levels of public crime mask the many ways in which residents experience violence in their daily ...

  17. Toward ethical norms and institutions for climate engineering research

    International Nuclear Information System (INIS)

    Morrow, David R; Kopp, Robert E; Oppenheimer, Michael

    2009-01-01

    Climate engineering (CE), the intentional modification of the climate in order to reduce the effects of increasing greenhouse gas concentrations, is sometimes touted as a potential response to climate change. Increasing interest in the topic has led to proposals for empirical tests of hypothesized CE techniques, which raise serious ethical concerns. We propose three ethical guidelines for CE researchers, derived from the ethics literature on research with human and animal subjects, applicable in the event that CE research progresses beyond computer modeling. The Principle of Respect requires that the scientific community secure the global public's consent, voiced through their governmental representatives, before beginning any empirical research. The Principle of Beneficence and Justice requires that researchers strive for a favorable risk-benefit ratio and a fair distribution of risks and anticipated benefits, all while protecting the basic rights of affected individuals. Finally, the Minimization Principle requires that researchers minimize the extent and intensity of each experiment by ensuring that no experiments last longer, cover a greater geographical extent, or have a greater impact on the climate, ecosystem, or human welfare than is necessary to test the specific hypotheses in question. Field experiments that might affect humans or ecosystems in significant ways should not proceed until a full discussion of the ethics of CE research occurs and appropriate institutions for regulating such experiments are established.

  18. Toward ethical norms and institutions for climate engineering research

    Science.gov (United States)

    Morrow, David R.; Kopp, Robert E.; Oppenheimer, Michael

    2009-10-01

    Climate engineering (CE), the intentional modification of the climate in order to reduce the effects of increasing greenhouse gas concentrations, is sometimes touted as a potential response to climate change. Increasing interest in the topic has led to proposals for empirical tests of hypothesized CE techniques, which raise serious ethical concerns. We propose three ethical guidelines for CE researchers, derived from the ethics literature on research with human and animal subjects, applicable in the event that CE research progresses beyond computer modeling. The Principle of Respect requires that the scientific community secure the global public's consent, voiced through their governmental representatives, before beginning any empirical research. The Principle of Beneficence and Justice requires that researchers strive for a favorable risk-benefit ratio and a fair distribution of risks and anticipated benefits, all while protecting the basic rights of affected individuals. Finally, the Minimization Principle requires that researchers minimize the extent and intensity of each experiment by ensuring that no experiments last longer, cover a greater geographical extent, or have a greater impact on the climate, ecosystem, or human welfare than is necessary to test the specific hypotheses in question. Field experiments that might affect humans or ecosystems in significant ways should not proceed until a full discussion of the ethics of CE research occurs and appropriate institutions for regulating such experiments are established.

  19. Research in progress and other activities of the Institute for Computer Applications in Science and Engineering

    Science.gov (United States)

    1993-01-01

    This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics and computer science during the period April 1, 1993 through September 30, 1993. The major categories of the current ICASE research program are: (1) applied and numerical mathematics, including numerical analysis and algorithm development; (2) theoretical and computational research in fluid mechanics in selected areas of interest to LaRC, including acoustic and combustion; (3) experimental research in transition and turbulence and aerodynamics involving LaRC facilities and scientists; and (4) computer science.

  20. Completeness and overlap in open access systems: Search engines, aggregate institutional repositories and physics-related open sources.

    Directory of Open Access Journals (Sweden)

    Ming-Yueh Tsay

    Full Text Available This study examines the completeness and overlap of coverage in physics of six open access scholarly communication systems, including two search engines (Google Scholar and Microsoft Academic, two aggregate institutional repositories (OAIster and OpenDOAR, and two physics-related open sources (arXiv.org and Astrophysics Data System. The 2001-2013 Nobel Laureates in Physics served as the sample. Bibliographic records of their publications were retrieved and downloaded from each system, and a computer program was developed to perform the analytical tasks of sorting, comparison, elimination, aggregation and statistical calculations. Quantitative analyses and cross-referencing were performed to determine the completeness and overlap of the system coverage of the six open access systems. The results may enable scholars to select an appropriate open access system as an efficient scholarly communication channel, and academic institutions may build institutional repositories or independently create citation index systems in the future. Suggestions on indicators and tools for academic assessment are presented based on the comprehensiveness assessment of each system.

  1. New Cyber Policy Centres for the Global South | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2018-04-13

    Apr 13, 2018 ... The Cyber Policy Centres initiative was established in 2017 to strengthen independent policy research institutions in sub-Saharan Africa, Asia, and Latin America by providing support and mentorship to build research and policy capacity in the key areas of digital rights, cybersecurity, and innovation policy.

  2. Éthiopie : tous les projets | Page 3 | CRDI - Centre de recherches ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Sujet: RESEARCH CENTRES, RESEARCH CAPACITY, Capacity building, INSTITUTION BUILDING, RESEARCH FELLOWSHIPS, POLICY MAKING, Evaluation. Région: Ethiopia, North of Sahara, South of Sahara. Programme: Initiative Think tank. Financement total : CA$ 1,117,021.00. La gestion de l'eau dans les milieux ...

  3. Forming engineers' sociocultural competence: Engineering ethics at tomsk polytechnic university

    Science.gov (United States)

    Galanina, E.; Dulzon, A.; Schwab, A.

    2015-10-01

    The aim of the present research is to discuss Tomsk Polytechnic University in respect of forming engineers’ sociocultural competence and teaching engineering ethics. Today international standards of training engineers cover efficient communication skills, ability to understand societal and environment context, professional and ethical responsibility. This article deals with the problem of contradiction between the need to form engineers’ sociocultural competence in Russian higher education institutions in order to meet the requirements of international accreditation organizations and the real capabilities of existing engineering curricula. We have described ethics teaching experience of TPU, studied the engineering master programs of TPU to see how the planned results are achieved. We have also given our recommendations to alter the structure of TPU educational curricula, which can also be applied in other higher education institutions.

  4. European Master of Science in Nuclear Engineering

    International Nuclear Information System (INIS)

    Moons, Frans; Safieh, Joseph; Giot, Michel; Mavko, Borut; Sehgal, Bal Raj; Schaefer, Anselm; Goethem, Georges van; D'Haeseleer, William

    2005-01-01

    The need to preserve, enhance or strengthen nuclear knowledge is worldwide recognised since a couple of years. Among others, 'networking to maintain nuclear competence through education and training', was recommended in 2001 by an expert panel to the European Commission [EUR, 19150 EN, Strategic issues related to a 6th Euratom Framework Programme (2002-2006). Scientific and Technical Committee Euratom, pp. 14]. It appears that within the European University education and training framework, nuclear engineering is presently still sufficiently covered, although somewhat fragmented. However, it has been observed that several areas are at risk in the very near future including safety relevant fields such as reactor physics and nuclear thermal-hydraulics. Furthermore, in some countries deficiencies have been identified in areas such as the back-end of the nuclear fuel cycle, waste management and decommissioning. To overcome these risks and deficiencies, it is of very high importance that European countries work more closely together. Harmonisation and improvement of the nuclear education and training have to take place at an international level in order to maintain the knowledge properly and to transfer it throughout Europe for the safe and economic design, operation and dismantling of present and future nuclear systems. To take up the challenges of offering top quality, new, attractive and relevant curricula, higher education institutions should cooperate with industry, regulatory bodies and research centres, and more appropriate funding from public and private sources. In addition, European nuclear education and training should benefit from links with international organisations like IAEA, OECD-NEA and others, and should include worldwide cooperation with academic institutions and research centres. The first and central issue is to establish a European Master of Science in Nuclear Engineering. The concept envisaged is compatible with the projected harmonised European

  5. Canadian Teaching and Learning Centres on Facebook and Twitter: An Exploration through Social Media

    Science.gov (United States)

    Atkins, Bridgette; Koroluk, Jaymie; Stranach, Matthew

    2017-01-01

    Teaching and Learning Centres (TLCs) play a role in the professional development of faculty, staff and teaching assistants in higher education institutions. One of the functions of many TLCs is that of outreach, not only to the individuals within their institutions who are their primary clientele but also to the greater higher education community.…

  6. Student-centred learning in Community Medicine: An experience from Jawaharlal Institute of Postgraduate Medical Education and Research, Puducherry.

    Science.gov (United States)

    Kar, S S; Premarajan, K C; L, Subitha; Archana, R; Iswarya, S; A, Sujiv

    2014-01-01

    Student-centred learning (SCL) places the student at the centre of policies, practices and decision-making in the teaching-learning process. SCL methodology also advocates active involvement of students in the curriculum planning, selection of teaching-learning methods and assessment process. We planned an education innovation project to assess the perception of fifth semester undergraduate medical students towards implementation of an SCL methodology. The study was done among 87 fifth semester undergraduate medical students (batch of 2010-11) in the noncommunicable disease epidemiology section of Community Medicine at the Jawaharlal Institute of Postgraduate Medical Education and Research (JIPMER), Puducherry. The students divided themselves into seven groups and developed the learning objectives, selected teaching-learning methods and assessment process for each session. The facilitators had 3-5 rounds of interaction with each group before the session. Qualitative analysis of feedback collected from students and external faculty after each session was done. The effect of implementing the SCL methodology was assessed by the reaction level of Kirkpatrick's training evaluation model by using a rating scale Results. Of the 87 eligible students, 73 (83.9%) returned the forms for evaluation. All seven groups were able to formulate the learning objectives. Most of the groups had used PowerPoint slides and videos as a teaching-learning tool. Innovative assessment methods such as crosswords and 'chocopati' were used by some groups. In general, the perception of students was favourable towards SCL compared to conventional methods and they felt that this methodology should be adopted more often. Time management and organization of sessions were the main problems encountered by the students. The mean (SD) score for the items 'sessions were useful', 'sessions were enjoyable' and 'sessions improved my knowledge' were 6.2 (1.8), 7.1 (1.8) and 6.3 (1.9), respectively. The

  7. Book collections in the library of the Gama Research Centre

    International Nuclear Information System (INIS)

    Widodo, R.U.; Soeratman, S.

    1976-01-01

    Book collection in the library of Gama Atomic Energy Research Centre, National Atomic Energy Agency in December 1974 is grouped according to Universal Decimal Classification. In accordance with the function of the library most of the collections are on physics, mathematics, and engineering. Authors and subjects are alphabetically indexed in the last part of the catalog. (author)

  8. Particular mechanism for continuously varying the compression ratio for an internal combustion engine

    Science.gov (United States)

    Raţiu, S.; Cătălinoiu, R.; Alexa, V.; Miklos, I.; Cioată, V.

    2018-01-01

    Variable compression ratio (VCR) is a technology to adjust the compression ratio of an internal combustion engine while the engine is in operation. The paper proposes the presentation of a particular mechanism allowing the position of the top dead centre to be changed, while the position of the bottom dead centre remains fixed. The kinematics of the mechanism is studied and its trajectories are graphically represented for different positions of operation.

  9. Nuclear research centres - Their evolution in the Indian context

    International Nuclear Information System (INIS)

    Kakodkar, A.; Grover, R.B.

    2001-01-01

    In a developing country, the role of the nuclear research centres (NRC) is quite large as it involves research, development, demonstration and deployment. The Bhabha Atomic Research Centre (BARC), the mother institution for all nuclear activities in India, has played this role for more than 40 years. With the successful deployment, the subsequent growth and management, both in the power and non-power sectors, is carried out by public sector enterprises. BARC continues to provide R and D support for improving performance and safety, technologies for repair and refurbishment, plant life management and evolutionary changes in the plant design. It has the responsibility of managing the backend of the fuel cycle. BARC has also been the nucleus for new research centres devoted to the development of fast reactors, accelerators and lasers. National NRCs, which provide exciting R and D opportunities with future orientation, provide assurance of availability of requisite skills and expertise while at the same time working for the futuristic objectives of the country. (author)

  10. Centre of Excellence For Simulation Education and Innovation (CESEI).

    Science.gov (United States)

    Qayumi, A Karim

    2010-01-01

    Simulation is becoming an integral part of medical education. The American College of Surgeons (ACS) was the first organization to recognize the value of simulation-based learning, and to award accreditation for educational institutions that aim to provide simulation as part of the experiential learning opportunity. Centre of Excellence for Simulation Education and Innovation (CESEI) is a multidisciplinary and interprofessional educational facility that is based at the University of British Columbia (UBC) and Vancouver Costal Health Authority (VCH). Centre of Excellence for Simulation Education and Innovation's goal is to provide excellence in education, research, and healthcare delivery by providing a technologically advanced environment and learning opportunity using simulation for various groups of learners including undergraduate, postgraduate, nursing, and allied health professionals. This article is an attempt to describe the infrastructure, services, and uniqueness of the Centre of Excellence for Simulation Education and Innovation. Copyright 2010 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  11. A Case for Community-Run Pre-Schools and Daycare Centres.

    Science.gov (United States)

    Renard, Rosamunde

    This booklet advocates and describes the establishment of community run preschool and day care centers. The type described is based on the Laborie Community Education Centre in Saint Lucia, West Indies. Chapter 1 advocates establishing small, local institutions that are community managed, community owned, concerned with quality, and sustainable.…

  12. Reducing cooling energy consumption in data centres and critical facilities

    Science.gov (United States)

    Cross, Gareth

    Given the rise of our everyday reliance on computers in all walks of life, from checking the train times to paying our credit card bills online, the need for computational power is ever increasing. Other than the ever-increasing performance of home Personal Computers (PC's) this reliance has given rise to a new phenomenon in the last 10 years ago. The data centre. Data centres contain vast arrays of IT cabinets loaded with servers that perform millions of computational equations every second. It is these data centres that allow us to continue with our reliance on the internet and the PC. As more and more data centres become necessary due to the increase in computing processing power required for the everyday activities we all take for granted so the energy consumed by these data centres rises. Not only are more and more data centres being constructed daily, but operators are also looking at ways to squeeze more processing from their existing data centres. This in turn leads to greater heat outputs and therefore requires more cooling. Cooling data centres requires a sizeable energy input, indeed to many megawatts per data centre site. Given the large amounts of money dependant on the successful operation of data centres, in particular for data centres operated by financial institutions, the onus is predominantly on ensuring the data centres operate with no technical glitches rather than in an energy conscious fashion. This report aims to investigate the ways and means of reducing energy consumption within data centres without compromising the technology the data centres are designed to house. As well as discussing the individual merits of the technologies and their implementation technical calculations will be undertaken where necessary to determine the levels of energy saving, if any, from each proposal. To enable comparison between each proposal any design calculations within this report will be undertaken against a notional data facility. This data facility will

  13. TTI Phase 2 Institutional Support: Centre for Policy Research | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    CPR is an independent, non-partisan research institute focused on improving policy-making and management, and promoting national development in India. CPR's research covers ... For CPR, this project will help enhance its research quality, organizational performance, and policy engagement. Policy influence in India

  14. Institutional transformation: An analysis of change initiatives at NSF ADVANCE institutions

    Science.gov (United States)

    Plummer, Ellen W.

    The purpose of this study was to examine how institutional culture promoted or impeded the implementation of round one and two NSF ADVANCE initiatives designed to improve academic climates for women in science and engineering. This study was conducted in two phases. In phase one, 35 participants from 18 institutions were interviewed to answer three research questions. Participants identified a policy, process, or program designed to improve academic cultures for women in science and engineering fields. Participants also identified strategies that promoted the implementation of these efforts, and discussed factors that impeded these efforts. In phase two, site visits were conducted at two institutions to answer a fourth research question. How did institutional culture shape the design and implementation of faculty search processes? Policies, processes, and programs were implemented by participants at the institutional, departmental, and individual levels and included family friendly and dual career policies at the institutional level, improved departmental faculty search and climate improvement processes, and mentoring programs and training for department heads at the individual level. Communication and leadership strategies were key to the successful implementation of policies, processes, and programs designed to achieve institutional transformation. Communication strategies involved shaping change messages to reach varied audiences often with the argument that change efforts would improve the climate for everyone not just women faculty members. Administrative and faculty leaders from multiple levels proved important to change efforts. Institutional Transformation Institutional culture shaped initiatives to improve faculty search processes. Faculty leaders in both settings used data to persuade faculty members of the need for change. At one site, data that included national availability information was critical to advancing the change agenda. At the other site

  15. Exploring Courses in Engineering Ethics.pdf

    OpenAIRE

    Filippidis, Michael; Hua, Whittier; Kocevska, Stefani; Mercer, Joshua; Neva, Melissa; Otetubi, Korede; Trawitzki, Kaila

    2015-01-01

    This is the final project that my classmates and I worked on for our Engineering Ethics Honors course at the New Jersey Institute of Technology.  We were assigned with the task of researching various options for engineering ethics courses, both online and at other institutions.  The overall goal of this presentation is to create criteria for an ideal engineering ethics course.

  16. List of scientific publications from the Karlsruhe Nuclear Research Centre of the year 1977

    International Nuclear Information System (INIS)

    1978-03-01

    The scientific and technical-scientific publications from the Karlsruhe Nuclear Research Centre comprise books, original papers in scientific or technical journals, diploma, doctoral and habilitation theses, as well as papers held at scientific conferences, patents, KfK reports, and external reports (KfK = Kernforschungszentrum Karlsruhe). The present report, KfK 2625, contains the titles of the 1977 publications, scientific papers being listed only after the manusscript has been filed in the Central Library of the research centre. As for patents, the titles given refer to either first issues of a patent, or to patents laid open for inspection. Progress reports are listed according to subjects involved. The whole list of publications is ordered according to the names of institutes and of projects, the latter group covering the titles of published project reports and of publications written by individual cooperators of a given project, as well as publications printed by the Karlsruhe Nuclear Research Centre, written by cooperators of the following projects: 'Process control with data processing plants', (PDV), and 'Computer-assisted development' (CAD). These projects are carried out together with other firms and instutes. Yet another group of publications covered are those of the Federal Institute for Food Research, and of guest scientists working in the Centre. (orig./HK) [de

  17. Journal of the Ghana Institution of Engineers

    African Journals Online (AJOL)

    ... of topical issues on all aspects of engineering practice in Ghana and abroad ... Computer Aided Synthesis of a Four-Bar Mechanism For Soil Tilling ... Development Of An Agricultural Land Drainage And Reclamation Design Software.

  18. A Study on the Socio demographic Profile of the Attendees at the Integrated Counseling and Testing Centre of Institute of Medical Sciences BHU, Varanasi, Uttar Pradesh

    Directory of Open Access Journals (Sweden)

    Rashmi Kumari

    2016-03-01

    Full Text Available Introduction: Human Immunodeficiency Virus (HIV counseling and testing services are a key entry point to the prevention of HIV infection and to the treatment and care of the people who are infected with HIV. The Integrated Counseling and Testing Centre (ICTC services are a cost effective intervention in the prevention of HIV/AIDS.Aims: To study the socio demographic characteristics of the attendees at the ICTC centre.Material and Methods: Setting – ICTC of Institutes of Medical Sciences BHU, Varanasi, Study Design: A cross-sectional, record based study, Study duration: The study population included 41159 clients who attended the ICTC centres from January 2009 to December 2011.Results: An overall 12.85% of the ICTC attendees were HIV Seropositive subjects. During 2009 to 2011. i.e. during past 3 years total males tested for HIV at the ICTC were 23326, out of which 3202 were HIV+ve showing positivity rate of 13.7%, while total females tested were 16671 out of which 2063 were HIV+ve showing positivity rate of about 12.4%. Consecutively in the last three years maximum load of patients was from the age groups 35-49 years (19.13% followed by 25-34 years (15.4%.Conclusion: People’s attitudes towards HIV are changing after the introduction of the ICTC, which plays a major role in the primary and secondary prevention of HIV. There is a more urgent need for the introduction of interventional measures like sex education and preventive education among the general population

  19. International Centre for Theoretical Physics, Trieste. Scientific activities in 1993

    International Nuclear Information System (INIS)

    1994-10-01

    The annual report of the International Centre for Theoretical Physics from Trieste for 1993 contains four parts. Part I gives statistical data on the main activities of the Centre. Part II presents the scientific programme structured as follows: Fundamental physics, Condensed matter physics, Mathematics, Physics and energy, Physics and environment, Physics of the living state, Applied physics, Adriatico Research Conferences, Diploma Course, Laboratories, Long-term visitors, Network of Associate Members and Federal Institutes, Training and research at italian laboratories, External Activities, Science, High Technology and Development Programme, Meeting hosted, Awards. Part III lists the publications issued in 1993. Part IV presents the scientific support services. Tabs

  20. Designed by Engineers: An analysis of interactionaries with engineering students

    Directory of Open Access Journals (Sweden)

    Henrik Artman

    2014-12-01

    Full Text Available The aim of this study is to describe and analyze learning taking place in a collaborative design exercise involving engineering students. The students perform a time-constrained, open-ended, complex interaction design task, an “interactionary”. A multimodal learning perspective is used. We have performed detailed analyses of video recordings of the engineering students, including classifying aspects of interaction. Our results show that the engineering students carry out and articulate their design work using a technology-centred approach and focus more on the function of their designs than on aspects of interaction. The engineering students mainly make use of ephemeral communication strategies (gestures and speech rather than sketching in physical materials. We conclude that the interactionary may be an educational format that can help engineering students learn the messiness of design work. We further identify several constraints to the engineering students’ design learning and propose useful interventions that a teacher could make during an interactionary. We especially emphasize interventions that help engineering students-retain aspects of human-centered design throughout the design process. This study partially replicates a previous study which involved interaction design students.

  1. The Stirling engine mechanism optimization

    Directory of Open Access Journals (Sweden)

    Jiří Podešva

    2016-03-01

    Full Text Available A special type of the gas engine with external combustion is called Stirling engine. The mechanism has two pistons with two volumes inside. The pistons are connected together through cooler, regenerator and warmer. The engine effectivity depends on the piston movement behaviour. The usual sinusoidal time curve leads to low effectiveness. The quick movement from lower to upper position with a certain delay in both top and bottom dead centres is more effective. The paper deals with three types of mechanisms, analyzing the piston movement, and their behavior. Special emphasize is taken to the piston movement regime.

  2. Establishment of the Russian Safeguards Methodology and Training Centre

    International Nuclear Information System (INIS)

    Guardini, S.; Cuypers, M.; Frigola, P.; Gubanov, V.; Ryazanov, B.; Volodin, Y.

    1995-01-01

    The Russian Federation has recently decided to transform and reinforce its State System of Accountancy and Control (SSAC) of nuclear materials. At the basis of the new system, consistent with the example of other national or regional systems, a laboratory framework giving reference and traceability to international standards, methodological support and training is planned. This last point includes the establishment of laboratories and facilities designed for the development, calibration, evaluation of the performances and training in the proper use of measurement methods and containment and surveillance measures, which are the basis for the implementation of an objective and sound nuclear material accountancy and control system. These projects will have to be tailored to the requirements of the nuclear fuel cycle in the Russian Federation and may eventually also be of interest for other countries in the CIS. The European Commission, in the framework of the collaboration with the Russian Federation, has proposed and initiated projects oriented to supporting the above plans. One of these projects concerns the establishment of the Russian Methodological and Training Centre RMTC at the Institute of Physics and Power Engineering (IPPE) of OBNINSK, Kaluga Region, in the Russian Federation. This paper describes the main features of the RMTC project

  3. Airports as Cityports in the City-region : Spatial-economic and institutional positions and institutional learning in Randstad-Schiphol (AMS), Frankfurt Rhein-Main (FRA), Tokyo Haneda (HND) and Narita (NRT)

    NARCIS (Netherlands)

    Wijk, M. van

    2007-01-01

    The thesis discusses the spatial-economic and institutional positions as well as institutional learning in the development process of airports as cityports in city-regions. Cityports are therein defined as urban centres where economic activities and infrastructure are at crossroads and are the

  4. Feasibility study for the Nuclear Research Centre of the Nuclear Energy Commission

    International Nuclear Information System (INIS)

    1985-01-01

    The feasibility study was carried out in order to evaluate the possibility of building a Nuclear Research Centre in Uruguay, which would support a wide range of nuclear related technological activities. A market research was carried out, of the products to be manufactured at the Nuclear Centre, regarding the size of production. A detailed list of the main products considered is enclosed. The siting study was performed through the analysis of the incidental factors, such as environment, technical scope and socio-ecomonic factors. An engineering study for the main installations was done. The investment and financial sources were also studied

  5. Metabolic Engineering X Conference

    Energy Technology Data Exchange (ETDEWEB)

    Flach, Evan [American Institute of Chemical Engineers

    2015-05-07

    The International Metabolic Engineering Society (IMES) and the Society for Biological Engineering (SBE), both technological communities of the American Institute of Chemical Engineers (AIChE), hosted the Metabolic Engineering X Conference (ME-X) on June 15-19, 2014 at the Westin Bayshore in Vancouver, British Columbia. It attracted 395 metabolic engineers from academia, industry and government from around the globe.

  6. Present issues for centre de la Manche disposal facility

    International Nuclear Information System (INIS)

    Dutzer, M.; Vervialle, J.P.; Charton, P.

    2006-01-01

    Centre de la Manche disposal facility officially entered its institutional control period in January 2003. Andra performs monitoring of the environment and of the capping system in order to prepare further phases that should become more and more passive. A detailed 'long term memory' has been established in order to provide future generations with the relevant information about the facility. (author)

  7. Publications | Page 17 | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... facteurs de violence liée au sexe en milieu urbain au Pakistan. Dans les centres urbains au Pakistan, le sexe et la violence interagissent de manière inattendue et influencent profondément la vie des femmes et des hommes, comme le démontre une étude menée à Karachi par l'Institute of Business Administration.

  8. CMS tracker slides into centre stage

    CERN Document Server

    2006-01-01

    As preparations for the magnet test and cosmic challenge get underway, a prototype tracker has been carefully inserted into the centre of CMS. The tracker, in its special platform, is slowly inserted into the centre of CMS. The CMS prototype tracker to be used for the magnet test and cosmic challenge coming up this summer has the same dimensions -2.5 m in diameter and 6 m in length- as the real one and tooling exactly like it. However, the support tube is only about 1% equipped, with 2 m2 of silicon detectors installed out of the total 200 m2. This is already more than any LEP experiment ever used and indicates the great care needed to be taken by engineers and technicians as these fragile detectors were installed and transported to Point 5. Sixteen thousand silicon detectors with a total of about 10 million strips will make up the full tracker. So far, 140 modules with about 100 000 strips have been implanted into the prototype tracker. These silicon strips will provide precision tracking for cosmic muon...

  9. Institute of Bioinorganic and Radiopharmaceutical Chemistry. Annual report 2001

    International Nuclear Information System (INIS)

    Johannsen, B.; Seifert, S.

    2002-01-01

    In 2001 the Forschungszentrum Rossendorf e.V. continued and further developed its basic and application-oriented research. Research at the Institute of Bioinorganic and Radiopharmaceutical Chemistry, one of five institutes in the Research Centre, was focused on radiotracers as molecular probes to make the human body biochemically transparent with regard to individual molecular reactions. As illustrated by the large number of contributions in this report, the Institute is predominantly engaged in the coordination chemistry and radiopharmacology of technetium and rhenium. (orig.)

  10. The GNSS-based component for the new Indonesian tsunami early warning centre provided by GITEWS

    Science.gov (United States)

    Falck, C.; Ramatschi, M.; Bartsch, M.; Merx, A.; Hoeberechts, J.; Rothacher, M.

    2009-04-01

    sensors on land the processing system delivers deviations from their normal, mean coordinates. The deviations or so called displacements are indicators for land mass movements which can occur, e.g., due to strong earthquakes. The ground motion information is a valuable source for a fast understanding of an earthquake's mechanism with possible relevance for a potentially following tsunami. By this means the GNSS system supports the decision finding process whether most probably a tsunami has been generated or not. For buoy based GNSS data the processing (differential, with GNSS reference station on land) delivers coordinates as well. Only the vertical component is of interest as it corresponds to the instant sea level height. Deviations to the mean sea level height are an indicator for a possibly passing tsunami wave. The graphical user interface (GUI) of the GNSS system supports both, a quick view for all staff members at the warning centre (24h/7d shifts) and deeper analysis by GNSS experts. The GNSS GUI system is implemented as a web-based application and allows all views to be displayed on different screens at the same time, even at remote locations. This is part of the concept, as it can support the dialogue between warning centre staff on duty or on standby and sensor station maintenance staff. Acknowledgements The GITEWS project (German Indonesian Tsunami Early Warning System) is carried out by a large group of scientists and engineers from (GFZ) German Research Centre for Geosciences and its partners from the German Aerospace Centre (DLR), the Alfred Wegener Institute for Polar and Marine Research (AWI), the GKSS Research Centre, the Konsortium Deutsche Meeresforschung (KDM), the Leibniz Institute for Marine Sciences (IFM-GEOMAR), the United Nations University (UNU), the Federal Institute for Geosciences and Natural Resources (BGR), the German Agency for Technical Cooperation (GTZ) and other international partners. Most relevant partners in Indonesia with respect

  11. Environmental education and socioresponsive engineering. Report of an educational initiative in Hyderabad, India.

    Science.gov (United States)

    Ansari, Ali Uddin; Jafari, Ashfaque; Mirzana, Ishrat Meera; Imtiaz, Zulfia; Lukacs, Heather

    2003-07-01

    A recent initiative at Muffakham Jah College of Engineering and Technology, Hyderabad, India, has resulted in setting up a program called Centre for Environment Studies and Socioresponsive Engineering which seeks to involve undergraduate students in studying and solving environmental problems in and around the city of Hyderabad, India. Two pilot projects have been undertaken--one focusing on design and construction of an eco-friendly house, The Natural House, and another directed at improving environmental and general living conditions in a slum area. The paper describes our attempts and experience of motivating our students to take interest in such projects. In an interesting development we invited a member of a student-faculty team at Massachusetts Institute of Technology (M.I.T.) that is doing a project in Nepal on safe drinking water. We report in our paper how the presentation by the guest from M.I.T. served as a catalyst for generating interest among civil and mechanical engineering students in our own projects. The paper includes contributions from one of our students and the M.I.T. staff member, reporting on their experiences related to the slum development project. We also discuss the Natural House project and its international and educational significance as a means of inculcating sensitivity and interest in nature among engineering students. We propose a pledge for engineers similar to the Hippocratic Oath for medical professionals.

  12. CMS Centres Worldwide - a New Collaborative Infrastructure

    International Nuclear Information System (INIS)

    Taylor, Lucas

    2011-01-01

    The CMS Experiment at the LHC has established a network of more than fifty inter-connected 'CMS Centres' at CERN and in institutes in the Americas, Asia, Australasia, and Europe. These facilities are used by people doing CMS detector and computing grid operations, remote shifts, data quality monitoring and analysis, as well as education and outreach. We present the computing, software, and collaborative tools and videoconferencing systems. These include permanently running 'telepresence' video links (hardware-based H.323, EVO and Vidyo), Webcasts, and generic Web tools such as CMS-TV for broadcasting live monitoring and outreach information. Being Web-based and experiment-independent, these systems could easily be extended to other organizations. We describe the experiences of using CMS Centres Worldwide in the CMS data-taking operations as well as for major media events with several hundred TV channels, radio stations, and many more press journalists simultaneously around the world.

  13. Experiencing professional strains of nurses, radiation engineers and physicians working at the Institute of oncology in Ljubljana

    International Nuclear Information System (INIS)

    Skufca Smrdel, A.C.

    2003-01-01

    Background. Since 1974 the term burnout is used in psychology. Burnout describes the end result of stress and has been described by Maslach comprising three basic components: emotional exhaustion, depersonalization and low personal accomplishment. In this paper we would like to describe some aspects of burnout experiences of the employees of the Institute of Oncology in Ljubljana. Subjects and methods. We used Questionnaire of professional stress, created by Zunter Nagy and Kocmur. In our research 137 health workers from four professional groups participated: physicians, graduated nurses, nurses and radiation engineers, representing 38% of all employees. Results. We found out that in the experience the professional stressof all four professional groups is relatively equalized. The most prominent feelings are of fatigue, irritability and work overload. There were no signs of depersonalization - as described by Maslach - reported in our group. In nurses and in radiation engineers a distress is significantly more often displayed due to poorer personal income and poorer material status. Nurses reported significantly more often the intention to change work position (51%), institution (57%) or job (47%). Conclusions. Workstress impacts on the experience and on the thought patterns in those participating in the study. We can describe those signs as burnout signs. However, there are more new questions opening in the future as well as the need to a longitudinal approach to the research of this more and more prominent field. (author)

  14. The Norwegian Radiation Protection Authority's Environmental Unit - 10 years in the Polar Environmental Centre, Tromsoe

    International Nuclear Information System (INIS)

    2009-01-01

    The Norwegian Radiation Protection Authority (NRPA) established an Environmental Unit at the Polar Environmental Centre in Tromsoe in the summer of 1999. The aim of establishing the unit in Tromsoe was to further the monitoring programmes of the NRPA in the Arctic and to the promote collaboration within the Polar Environmental Centre. Over the last 10 years, the NRPA's Environmental Unit has undertaken a range of research and monitoring activities in close cooperation with other institutes in the Polar Environmental Centre that have helped to further understand the current radiological status of the Norwegian Arctic. (Author)

  15. Austria: The INIS Austria Centre 1970-2015

    International Nuclear Information System (INIS)

    Rössner, Marcus

    2015-01-01

    This article spotlights Austrian people and institutions that have influenced the fortunes of INIS and the INIS Centre in Austria. The work of two Austrians had a lasting influence on INIS. The first person, Ms Elisabeth Ruckenbauer, was Head of the INIS Bibliographic Control Unit at the start of INIS. She was responsible for the development and implementation of the INIS bibliographic description rules (INIS Reference Series IAEA-INIS-01 and -02). The second person having a lasting influence on INIS was Mr Alexander Nevyjel. He was Austrian INIS Liaison Officer from 1983 –2002, and Head of the INIS Subject Control Unit until 2011. During his second term of office, he developed, together with the Swiss company Convera, the Computer Assisted Indexing Software (CAI). The aim of the project was to optimize indexing. The implementation of CAI in 2004 resulted in an increase of input to the INIS database; from around 60 000 records per year to over 100 000 records per year. We are proud that Mr Nevyjel is still an active member of the INIS Austria Center and that he continues to offer his experience and expertise. The Austrian INIS Centre has resided at two scientific institutions: Seibersdorf and the Austrian Central Library for Physics and Chemistry Library, each having a specific relationship with the IAEA and INIS

  16. Associateship | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Address: Dept. of Electrical Engineering, Indian Institute of Technology, Kandi, ... Specialization: Elementary Particle Physics Address during Associateship: Centre for Theoretical Studies, Indian Institute of Science, Bangalore 560 012.

  17. Bhabha Atomic Research Centre annual report : 1989

    International Nuclear Information System (INIS)

    1991-01-01

    The main thrust of the various research and development (R and D) activities of the Bhabha Atomic Research Centre (BARC), Bombay, is towards the implementation of India's nuclear power programme. To that end, its R and D activities cover the entire nuclear fuel cycle, reactor technology; applications of radioisotopes and radiations in agriculture, medicine and industries; and radiation protection in nuclear installations. The report presents in summarised form the R and D activities carried out during 1989 in the chapters entitled: Physical Sciences, Chemical Sciences, Materials and Materials Sciences, Radioisotopes, Reactors, Fuel Cycle, Radiological Safety and Protection, Electronics and Instrumentation, Engineering Services, Life Sciences and General. At the end of each chapter, a list of publications by the staff scientists in the corresponding subject field is given. The list includes published journal articles and technical reports, and papers presented at conferences, symposia etc. The report also covers the R and D activities of the outstation units of BARC, namely, Nuclear Research Laboratory, Srinagar; High Altitude Research Laboratory, Gulmarg; and Variable Energy Cyclotron Centre, Calcutta. BARC is also engaged in basic an applied research in frontier areas of science such as plasma and fusion physics, accelerators and lasers, high temperature superconductivity, condensed matter physics, high pressure physics, high resolution spectroscopy, chemical reaction dynamics and laser induced chemistry, electronics and robotics: radiation biology, and genetic engineering. Report is illustrated with a number of figures, graphs, and coloured pictures. (M.G.B.) figs., refs

  18. Sadhana | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Department of Aerospace Engineering, Indian Institute of Science, Bangalore 560012, India; Structures group, ISRO Satellite Centre, Bangalore 560017, India; Department of Mechanical Engineering, PES University, Bangalore 560085, India ...

  19. Open Access Centre at the Nature Research Centre: a facility for enhancement of scientific research, education and public outreach in Lithuania

    Science.gov (United States)

    Šerpenskienė, Silvija; Skridlaitė, Gražina

    2014-05-01

    Open Access Centre (OAC) was established in Vilnius, Lithuania in 2013 as a subdivision of the Nature Research Centre (NRC) operating on the principle of open access for both internal and external users. The OAC consists of 15 units, i.e. 15 NRC laboratories or their branches. Forty four sets of research equipment were purchased. The OAC cooperates with Lithuanian science and studies institutions, business sector and other governmental and public institutions. Investigations can be carried in the Geosciences, Biotaxonomy, Ecology and Molecular Research, and Ecotoxicology fields. Environmental radioactivity, radioecology, nuclear geophysics, microscopic and chemical composition of natural compounds (minerals, rocks etc.), paleomagnetic, magnetic and environmental investigations, as well as ground and water contamination by oil products and other organic environment polluting compounds, identification of fossils, rocks and minerals can be studied in the Georesearch field. Ecosystems and identification of plants, animals and microorganisms are main subjects of the Biotaxonomy, Ecology and Molecular Research field. The Ecotoxicologal Research deals with toxic and genotoxic effects of toxic substances and other sources of pollution on macro- and microorganisms and cell cultures. Open access is guaranteed by: (1) providing scientific research and experimental development services; (2) implementing joint business and science projects; (3) using facilities for the training of specialists of the highest qualifications; (4) providing properly qualified and technically trained users with opportunities to carry out their scientific research and/or experiments in the OAC laboratories by themselves. Services provided in the Open Access Centre can be received by both internal and external users: persons undertaking innovative economic activities, students of other educational institutions, interns, external teams of researchers engaged in scientific research activities, teachers

  20. Availability measurement of grid services from the perspective of a scientific computing centre

    International Nuclear Information System (INIS)

    Marten, H; Koenig, T

    2011-01-01

    The Karlsruhe Institute of Technology (KIT) is the merger of Forschungszentrum Karlsruhe and the Technical University Karlsruhe. The Steinbuch Centre for Computing (SCC) was one of the first new organizational units of KIT, combining the former Institute for Scientific Computing of Forschungszentrum Karlsruhe and the Computing Centre of the University. IT service management according to the worldwide de-facto-standard 'IT Infrastructure Library (ITIL)' was chosen by SCC as a strategic element to support the merging of the two existing computing centres located at a distance of about 10 km. The availability and reliability of IT services directly influence the customer satisfaction as well as the reputation of the service provider, and unscheduled loss of availability due to hardware or software failures may even result in severe consequences like data loss. Fault tolerant and error correcting design features are reducing the risk of IT component failures and help to improve the delivered availability. The ITIL process controlling the respective design is called Availability Management. This paper discusses Availability Management regarding grid services delivered to WLCG and provides a few elementary guidelines for availability measurements and calculations of services consisting of arbitrary numbers of components.

  1. Manchester Civil Justice Centre: Procuring and Managing an Institutional Building with a Mixed Mode Ventilation System—A Case for Post-Occupancy Evaluation

    Directory of Open Access Journals (Sweden)

    John Napier

    2013-04-01

    Full Text Available Manchester Civil Justice Centre is a striking contemporary 14 storey court building which has won awards for many different aspects of its design, construction and sustainability. From November 2002 to July 2005, the author was a key member of Denton Corker Marshall’s London project team having responsibility for key areas of design development, integration of technology and sustainable design including the East elevation’s “environmental veil”. This paper tracks the procurement of the building, describing its low energy features and their performance in practice. The paper reviews the low carbon elements of the design (daylight and natural ventilation systems in the context of similar buildings and the buildings operational performance. The building has a mixed mode ventilation system which is managed centrally; the paper describes the ongoing relationship between the Facilities Management and the building’s users and their expectations of comfort and offers an explanation as to why the building’s energy performance is not as good as predicted at design stage. A case is made that this building is a significant example of low energy design and would form a good example for a detailed Post Occupancy Evaluation. The energy performance of the building could be studied in more detail to encourage the users (judges, staff and the public to improve the building’s energy performance and to share knowledge within the construction industry. Institutional and commercial barriers to the more mainstream adoption of Post Occupancy Evaluation are discussed with respect to the Manchester Civil Justice Centre.

  2. Curriculum: Integrating Health and Safety Into Engineering Curricula.

    Science.gov (United States)

    Talty, John T.

    1985-01-01

    National Institute for Occupational Safety and Health instituted a project in 1980 to encourage engineering educators to focus on occupational safety and health issues in engineering curricula. Progress to date is outlined, considering specific results in curriculum development, engineering society interaction, and formation of a teaching…

  3. Controlling the Didactic Relation: A Case in Process Engineering Education

    Science.gov (United States)

    Jaako, Juha

    2014-01-01

    A case study was conducted during 1994-2013 on several groups of process engineering students to see what was needed to transform a single course from a teacher-centred to a student-centred learning environment (SCLE). Development work was done incrementally, using Herbart's didactic triangle as a theoretical framework. The effects of the…

  4. Final priority; National Institute on Disability and Rehabilitation Research--Rehabilitation Engineering Research Centers. Final priority.

    Science.gov (United States)

    2014-07-09

    The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Disability and Rehabilitation Research Projects and Centers Program administered by the National Institute on Disability and Rehabilitation Research (NIDRR). Specifically, we announce a priority for a Rehabilitation Engineering Research Center (RERC) on Improving the Accessibility, Usability, and Performance of Technology for Individuals who are Deaf or Hard of Hearing. The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. We take this action to focus research attention on an area of national need. We intend the priority to contribute to improving the accessibility, usability, and performance of technology for individuals who are deaf or hard of hearing.

  5. SATISFACTION OF QUALIFICATION REQUIREMENTS OF EMPLOYERS APPLIED TO SOFTWARE ENGINEERS IN THE PROCESS OF TRAINING AT HIGHER EDUCATIONAL INSTITUTIONS

    Directory of Open Access Journals (Sweden)

    Vladislav Kruhlyk

    2017-03-01

    Full Text Available In the article, based on the analysis of the problems of the professional training of software engineers in higher educational institutions, was shown that the contents of the curricula for the training of software engineers in basic IT specialties in higher education institutions generally meet the requirements to them at the labor market. It is stated that at the present time there are certain changes in the job market not only in the increasing demand for IT professionals but also in the requirements settled for future specialists. To scientists’ opinion, at present there is a gap between the level of expectation of employers and the level of education of graduates of IT-specialties of universities. Due to the extremely fast pace of IT development, already at the end of the studies, students' knowledge may become obsolete. We are talking about a complex of competencies offered by university during training of specialist for their relevance and competitiveness at the labor market. At the same time, the practical training of students does not fully correspond to the current state of information technology. Therefore, it is necessary to ensure the updating of the contents of the academic disciplines with the aim of providing quality training of specialists.

  6. Corrosion Engineering.

    Science.gov (United States)

    White, Charles V.

    A description is provided for a Corrosion and Corrosion Control course offered in the Continuing Engineering Education Program at the General Motors Institute (GMI). GMI is a small cooperative engineering school of approximately 2,000 students who alternate between six-week periods of academic study and six weeks of related work experience in…

  7. Recent progress in accelerator activities at Raja Ramanna Centre for Advanced Technology, Indore

    International Nuclear Information System (INIS)

    Gupta, P.D.

    2013-01-01

    Raja Ramanna Centre for Advanced Technology, Indore is a premier national institute engaged in R and D work in front-line areas of accelerator science, technology, and applications. The Centre has designed, developed, and commissioned two synchrotron radiation sources: Indus-1 and Indus-2, serving as national facilities. The Centre is pursuing various other accelerator activities viz. development of a high energy proton accelerator for a spallation neutron source, electron accelerators for food irradiation and industrial applications and free electron lasers (FEL) in THz and IR spectral region, study of innovative schemes of laser driven electron acceleration, and development of advanced technologies to support these activities such as superconducting RF (SCRF) technology, cryogenics, RF power, magnets, ultra high vacuum and control instrumentation. In this talk, an overview of the progress made in accelerator activities at Raja Ramanna Centre for Advanced Technology in recent years is be presented

  8. Soutien institutionnel à l'Economic Policy Research Centre (EPRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    L'Economic Policy Research Centre (EPRC) est un organisme autonome et à but non lucratif voué à la recherche dans le domaine des politiques qui a été établi en 1993 avec le soutien du gouvernement de l'Ouganda, de bailleurs de fonds et d'instituts de recherche étrangers. Il était prévu que l'EPRC fonctionne en ...

  9. International Code Centres Network. Summary Report of the Technical Meeting

    International Nuclear Information System (INIS)

    Chung, H-K.

    2011-01-01

    Fifteen international experts on computational aspects of atomic, molecular and particle surface interaction data for fusion energy research participated in the 2nd technical meeting of the International Code Centres Network. Participants reported their research on data production and computational capabilities at their institutions. Experts in the field of plasma modeling of magnetic fusion research joined this meeting to present the data needs and bring the perspective of data users. The interaction and discussion among data producers and data users in this two-day meeting led to an agreement that the scope and function of Code Centres Network should be reformulated to serve the needs of fusion community in more effective way. (author)

  10. Establishment of a South African nuclear science exhibition centre

    Energy Technology Data Exchange (ETDEWEB)

    Lekwe, K.G.; Stander, G.; Faanhof, A. [South African Nuclear Energy Cooperation, P O Box 582, Pretoria (South Africa)

    2008-07-01

    After an initial survey undertaken by the South African Nuclear Energy Corporation (Necsa), one of the findings was that nuclear knowledge is virtually non-existent amongst the general public, including school children, throughout the country. The Department of Education (DoE) is currently in the process of introducing Nuclear as part of the school curriculum, which would require a collective effort between the schools and all the Nuclear Institutions in the country. Necsa as well as other nuclear industries have the responsibility to promote public awareness, appreciation and understanding of science and nuclear science in particular. Necsa is leading the national initiative to establish the nuclear science centre which would amongst others guide a person from the very basics of nuclear science to present and future applications thereof. The nuclear science centre will include information on the SAFARI-1 reactor, the Koeberg power reactor, the Pebble Bed Modular Reactor (PBMR), particle accelerators, food preservation, medical applications, etc. This paper will give the overview of the centre as well as its objectives thereof. (authors)

  11. Establishment of a South African nuclear science exhibition centre

    International Nuclear Information System (INIS)

    Lekwe, K.G.; Stander, G.; Faanhof, A.

    2008-01-01

    After an initial survey undertaken by the South African Nuclear Energy Corporation (Necsa), one of the findings was that nuclear knowledge is virtually non-existent amongst the general public, including school children, throughout the country. The Department of Education (DoE) is currently in the process of introducing Nuclear as part of the school curriculum, which would require a collective effort between the schools and all the Nuclear Institutions in the country. Necsa as well as other nuclear industries have the responsibility to promote public awareness, appreciation and understanding of science and nuclear science in particular. Necsa is leading the national initiative to establish the nuclear science centre which would amongst others guide a person from the very basics of nuclear science to present and future applications thereof. The nuclear science centre will include information on the SAFARI-1 reactor, the Koeberg power reactor, the Pebble Bed Modular Reactor (PBMR), particle accelerators, food preservation, medical applications, etc. This paper will give the overview of the centre as well as its objectives thereof. (authors)

  12. Jose f Regional Underground Research Centre: a new and attractive location for interdisciplinary teaching, research and training in the field of nuclear engineering

    International Nuclear Information System (INIS)

    Pacovsky, J.; Vasicek, R.

    2010-10-01

    The Jose f Gallery, located in the central Bohemia region of the Czech Republic (not far from the capital, Prague), was first excavated in 1981 as an exploration complex for the potential mining of gold. In 2007, the gallery was substantially reconstructed to house the Jose f Underground Educational Facility (Jose f UEF), which subsequently became an autonomous workplace under the direction of the Czech Technical University in Prague. At the beginning of 2010, the UEF was renamed the Jose f Regional Underground Research Centre (Jose f URC) which, along with the extensive underground complex, features modern above-ground facilities. One of the most important roles of this research centre is to provide practical -in situ- instruction in the fields of geotechnical engineering, geology, geochemistry, radiochemistry and radioecology. The training of future experts in this authentic underground setting involves the participation of several other Czech universities and numerous experienced specialists from outside the academic sphere. The IAEA has recently added the Jose f URC to its prestigious list of international training centres involved in the Training in and demonstration of waste disposal technologies in underground research facilities - A network of centres of excellence project. In addition to teaching and training, the Jose f URC is heavily involved in a wide range of research and development activities. The Jose f URC underground facilities are currently being used for research purposes as part of several European Union International experimental projects addressing various issues related to deep repository radioactive waste disposal (TIMODAZ - FP6, Forge - FP7, PETRUS II - FP7) as well as for hosting domestic projects supported by the Czech Ministry of Industry and Trade and the Czech Science Foundation. The Jose f URC is also working in close cooperation with the private construction sector providing practical training in underground construction

  13. Jose f Regional Underground Research Centre: a new and attractive location for interdisciplinary teaching, research and training in the field of nuclear engineering

    Energy Technology Data Exchange (ETDEWEB)

    Pacovsky, J.; Vasicek, R., E-mail: Pacovsky@fsv.cvut.c [Czech Technical University in Prague, Faculty of Civil Engineering, Centre of Experimental Geotechnics, Thakurova 7, 166-29 Prague 6 (Czech Republic)

    2010-10-15

    The Jose f Gallery, located in the central Bohemia region of the Czech Republic (not far from the capital, Prague), was first excavated in 1981 as an exploration complex for the potential mining of gold. In 2007, the gallery was substantially reconstructed to house the Jose f Underground Educational Facility (Jose f UEF), which subsequently became an autonomous workplace under the direction of the Czech Technical University in Prague. At the beginning of 2010, the UEF was renamed the Jose f Regional Underground Research Centre (Jose f URC) which, along with the extensive underground complex, features modern above-ground facilities. One of the most important roles of this research centre is to provide practical -in situ- instruction in the fields of geotechnical engineering, geology, geochemistry, radiochemistry and radioecology. The training of future experts in this authentic underground setting involves the participation of several other Czech universities and numerous experienced specialists from outside the academic sphere. The IAEA has recently added the Jose f URC to its prestigious list of international training centres involved in the Training in and demonstration of waste disposal technologies in underground research facilities - A network of centres of excellence project. In addition to teaching and training, the Jose f URC is heavily involved in a wide range of research and development activities. The Jose f URC underground facilities are currently being used for research purposes as part of several European Union International experimental projects addressing various issues related to deep repository radioactive waste disposal (TIMODAZ - FP6, Forge - FP7, PETRUS II - FP7) as well as for hosting domestic projects supported by the Czech Ministry of Industry and Trade and the Czech Science Foundation. The Jose f URC is also working in close cooperation with the private construction sector providing practical training in underground construction

  14. Annual report 90 Environment Institute

    International Nuclear Information System (INIS)

    1991-01-01

    This is the second annual report of the Environment Institute of the Joint Research Centre, Ispra Site, of the Commission of the European Communities. The report summarizes the progress accomplished in the course of 1990 in the various projects included in the multiannual (1988-91) Specific Research Programmes tackled by the Institute i.e. Environment Protection and Radioactive Waste Management, the former being focused on environmental chemicals, air pollution and pollutant transport, water pollution, chemical waste, food and drug analysis, the latter on safety assessment for waste disposal in geological formations. The scientific support given to the Commission Services for the implementation of EC directives dealing with chemicals, air pollution, water pollution, chemical waste and radioactive environmental monitoring (REM) is also described. Lastly the outcome of various activities related to work for third parties and to the participation of the Institute in EUREKA and COST projects is shortly outlined. The report includes data on the Institute Structure, human and budget resources and large installations operated by the Institute

  15. The UK Centre for Astrobiology: A Virtual Astrobiology Centre. Accomplishments and Lessons Learned, 2011-2016.

    Science.gov (United States)

    Cockell, Charles S; Biller, Beth; Bryce, Casey; Cousins, Claire; Direito, Susana; Forgan, Duncan; Fox-Powell, Mark; Harrison, Jesse; Landenmark, Hanna; Nixon, Sophie; Payler, Samuel J; Rice, Ken; Samuels, Toby; Schwendner, Petra; Stevens, Adam; Nicholson, Natasha; Wadsworth, Jennifer

    2018-02-01

    The UK Centre for Astrobiology (UKCA) was set up in 2011 as a virtual center to contribute to astrobiology research, education, and outreach. After 5 years, we describe this center and its work in each of these areas. Its research has focused on studying life in extreme environments, the limits of life on Earth, and implications for habitability elsewhere. Among its research infrastructure projects, UKCA has assembled an underground astrobiology laboratory that has hosted a deep subsurface planetary analog program, and it has developed new flow-through systems to study extraterrestrial aqueous environments. UKCA has used this research backdrop to develop education programs in astrobiology, including a massive open online course in astrobiology that has attracted over 120,000 students, a teacher training program, and an initiative to take astrobiology into prisons. In this paper, we review these activities and others with a particular focus on providing lessons to others who may consider setting up an astrobiology center, institute, or science facility. We discuss experience in integrating astrobiology research into teaching and education activities. Key Words: Astrobiology-Centre-Education-Subsurface-Analog research. Astrobiology 18, 224-243.

  16. Introducing Knowledge Management in Study Program of Nuclear Engineering

    International Nuclear Information System (INIS)

    Pleslic, S.

    2012-01-01

    Nuclear engineering is the branch of engineering concerning application of the fission as well as the fusion of atomic nuclei, and the application of other sub-atomic physics, based on the principles of nuclear physics. In the sub-field of nuclear fission there are many investigations of interactions and maintaining of systems and components like nuclear reactors and nuclear power plants. The field also includes the study of different applications of ionizing radiation (medicine, agriculture...), nuclear safety, the problems of thermodynamics transport, nuclear materials and nuclear fuels, and other related technologies like radioactive waste management. In the area of nuclear science and engineering a big amount of knowledge has been accumulated over the last decades. Different levels of nuclear knowledge were considered in different ways and they were taught to different parts of population as a general human culture and as a general scientific-technical-technological culture (high schools, nuclear information centres, training centres, universities...). An advanced level of nuclear knowledge has been accumulated by many experienced workers, specialists and experts in all nuclear and nuclear-related fields and applications. In the last 20 years knowledge management has established itself as a discipline of enabling individuals, teams and whole organizations to create, share and apply knowledge collectively and systematically, with goal to better achieve their objectives. Also, knowledge management became key strategic approach for management of intellectual assets and knowledge that can improve safety, efficiency and innovation, and lead to preserve and enhance current knowledge. Knowledge management could be applied in education, training, networking, human resource development and capacity building, sharing, pooling and transferring knowledge form centres of knowledge to centres of growth. Considering the critical importance of nuclear knowledge it is important

  17. Factors that trigger emergency physicians to contact a poison centre: findings from a Swiss study.

    Science.gov (United States)

    Schurter, David; Rauber-Lüthy, Christine; Jahns, Maximilian; Haberkern, Monika; Kupferschmidt, Hugo; Exadaktylos, Aristomenis; Eriksson, Urs; Ceschi, Alessandro

    2014-03-01

    Poison centres offer rapid and comprehensive support for emergency physicians managing poisoned patients. This study investigates institutional, case-specific and poisoning-specific factors which influence the decision of emergency physicians to contact a poison centre. Retrospective, consecutive review of all poisoning-related admissions to the emergency departments (EDs) of a primary care hospital and a university hospital-based tertiary referral centre during 2007. Corresponding poison centre consultations were extracted from the poison centre database. Data were matched and analysed by logistic regression and generalised linear mixed models. 545 poisonings were treated in the participating EDs (350 (64.2%) in the tertiary care centre, 195 (35.8%) in the primary care hospital). The poison centre was consulted in 62 (11.4%) cases (38 (61.3%) by the tertiary care centre and 24 (38.7%) by the primary care hospital). Factors significantly associated with poison centre consultation included gender (female vs male) (OR 2.99; 95% CI 1.69 to 5.29; p1 vs 1) (OR 2.84; 95% CI 1.65 to 4.9; ppoison centre consultation. Poison centre consultation was significantly higher during the week, and significantly less during night shifts. The poison centre was consulted significantly more when patients were admitted to intensive care units (OR 5.81; 95% CI 3.25 to 10.37; ppoison centre consultation by emergency physicians. It appears that intensive care unit admission and other factors reflecting either complexity or uncertainty of the clinical situation are the strongest predictors for poison centre consultation. Hospital size did not influence referral behaviour.

  18. Résultats de recherche | Page 3 | CRDI - Centre de recherches pour ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le CRDI administre l'apport de 20 millions de dollars du gouvernement du Canada à l'expansion du réseau de centre AIMS, l'objectif de l'initiative Next Einstein de l'Institut Africain des Sciences ... Entre chercheurs et entrepreneurs - pour la recherche et la promotion de l'entrepreneuriat en Afrique francophone.

  19. Conditions for thermal instability in the Galactic Centre mini-spiral region

    Czech Academy of Sciences Publication Activity Database

    Rózanska, A.; Czerny, B.; Kunneriath, Devaky; Adhikari, T. P.; Karas, Vladimír; Moscibrodzka, M.

    2014-01-01

    Roč. 445, č. 4 (2014), s. 4385-4394 ISSN 0035-8711 R&D Projects: GA ČR(CZ) GC13-00070J; GA MŠk(CZ) LH14049 Institutional support: RVO:67985815 Keywords : black holes * accretion discs * galactic centre Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 5.107, year: 2014

  20. Special theory on chemical engineering

    International Nuclear Information System (INIS)

    1987-06-01

    This book give a special description about chemical engineering. The contents of this book are special technique for isolation on introduction and separation by membrane, biochemistry engineering, process system engineering, energy engineering, environment engineering, a high molecular new material, election material and research on surface property of catalyst. It has appendixes on history of transition on Korean chemical engineering text contents and history of the activity of Korea chemical engineering institute.

  1. Oral Assessment in Engineering Education

    DEFF Research Database (Denmark)

    Jensen, Bogi Bech

    2010-01-01

    This paper describes an oral assessment technique that has been used for over 20 years at the Centre of Maritime Studies and Engineering in the Faroe Islands. The technique has proven less laborious for the examiners and the students agree that this technique not only assesses their surface...

  2. [Integration of fundamental and applied medical and technical research made at the department of the biomedical systems, Moscow State Institute of Electronic Engineering].

    Science.gov (United States)

    Selishchev, S V

    2004-01-01

    The integration results of fundamental and applied medical-and-technical research made at the chair of biomedical systems, Moscow state institute of electronic engineering (technical university--MSIEE), are described in the paper. The chair is guided in its research activity by the traditions of higher education in Russia in the field of biomedical electronics and biomedical engineering. Its activities are based on the extrapolation of methods of electronic tools, computer technologies, physics, biology and medicine with due respect being paid to the requirements of practical medicine and to topical issues of research and design.

  3. Institute for Scientific and Educational Technology (ISET)-Education, Research and Training Programs in Engineering and Sciences

    Science.gov (United States)

    Tiwari, S. N. (Principal Investigator); Massenberg, Samuel E. (Technical Monitor)

    2002-01-01

    The 'Institute for Scientific and Educational Technology' has been established to provide a mechanism through which universities and other research organizations may cooperate with one another and with different government agencies and industrial organizations to further and promote research, education, and training programs in science, engineering, and related fields. This effort has been undertaken consistent with the national vision to 'promote excellence in America s educational system through enhancing and expanding scientific and technological competence.' The specific programs are directed in promoting and achieving excellence for individuals at all levels (elementary and secondary schools, undergraduate and graduate education, and postdoctoral and faculty research). The program is consistent with the existing activities of the Institute for Computational and Applied Mechanics (ICAM) and the American Society for Engineering Education (ASEE) at NASA Langley Research Center (LaRC). The efforts will be directed to embark on other research, education, and training activities in various fields of engineering, scientific, and educational technologies. The specific objectives of the present program may be outlined briefly as follows: 1) Cooperate in the various research, education, and technology programs of the Office of Education at LaRC. 2) Develop procedures for interactions between precollege, college, and graduate students, and between faculty and students at all levels. 3) Direct efforts to increase the participation by women and minorities in educational programs at all levels. 4) Enhance existing activities of ICAM and ASEE in education, research, and training of graduate students and faculty. 5) Invite distinguished scholars as appropriate and consistent with ISET goals to spend their summers and/or sabbaticals at NASA Langley andor ODU and interact with different researchers and graduate students. Perform research and administrative activities as needed

  4. Safety culture of complex risky systems: the Nuclear Engineering Institute case study

    International Nuclear Information System (INIS)

    Obadia, Isaac Jose; Vidal, Mario Cesar Rodriguez; Melo, Paulo Fernando F. Frutuoso e

    2002-01-01

    Analysis of industrial accidents have demonstrated that safe and reliable operation of complex industrial processes that use risky technology and/or hazard material depends not only on technical factors but on human and organizational factors as well. After the Chernobyl nuclear accident in 1986, the International Atomic Energy Agency established the safety culture concept and started a safety culture enhancement program within nuclear organizations worldwide. The Nuclear Engineering Institute, IEN, is a research and technological development unit of the Brazilian Nuclear Energy Commission, CNEN, characterized as a nuclear and radioactive installation where processes presenting risks to operators and to the environment are executed. In 1999, IEN started a management change program, aiming to achieve excellence of performance, based on the Model of Excellence of the National Quality Award. IEN's safety culture project is based on IAEA methodology and has been incorporated to the organizational management process. This work presents IEN's safety culture project; the results obtained on the initial safety culture assessment and the following project actions. (author)

  5. Trends in Environmental Health Engineering

    Science.gov (United States)

    Rowe, D. R.

    1972-01-01

    Reviews the trends in environmental health engineering and describes programs in environmental engineering technology and the associated environmental engineering courses at Western Kentucky University (four-year program), Wytheville Community College (two-year program), and Rensselaer Polytechnic Institute (four-year program). (PR)

  6. CAS at the Cockcroft Institute

    CERN Multimedia

    2007-01-01

    The CERN Accelerator School (CAS) and the UK’s new centre for accelerator science, the Cockcroft Institute, jointly organised a course on General Accelerator Physics, at intermediate level, at the Cockcroft Institute, Daresbury, UK, from 16 to 28 September 2007. The venue took advantage of the excellent new facilities in the Institute and the existing infrastructure of the adjacent Daresbury Laboratory. The intermediate level course followed established practice, with lectures on core topics in the mornings and specialised courses in the afternoons. The latter provided "hands-on" education and experience in the three selected topics: "RF Measurements Techniques", "Beam Instrumentation and Diagnostics" and "Optics Design and Correction". These proved to be highly successful, with participants choosing one course and following the topic throughout the school. Guided studies, tutorials, seminars and a poster session completed the prog...

  7. Development of the Advanced CANDU Reactor control centre

    International Nuclear Information System (INIS)

    Malcolm, S.; Leger, R.

    2004-01-01

    The next generation CANDU control centre is being designed for the Advanced CANDU Reactor (ACR) station. The design is based upon the recent Qinshan control room with further upgrades to meet customer needs with respect to high capacity factor with low Operation, Maintenance and Administration (OM and A) costs. This evolutionary design includes the long proven functionality at several existing CANDU control centres such as the 4-unit station at Darlington, with advanced features made possible by new control and display technology. Additionally, ACR control centres address characteristics resulting from Human Factors Engineering (HFE) analysis of control centre operations in order to further enhance personnel awareness of system and plant status. Statistics show that up to 70% of plant significant events, which have caused plant outages, have a root cause attributable to the human from such sources as complex interfaces, procedures, maintenance and management practices. Consequently, special attention is made for the application of HFE throughout the ACR design process. The design process follows a systematic analytical approach to define operations staff information and information presentation requirements. The resultant human-system interfaces (HSI) such as those for monitoring, annunciation and control information are then verified and validated against the system design requirements to provide a high confidence level that adequate and correct information is being provided in a timely manner to support the necessary operational tasks. The ACR control centre provides plant staff with an improved operability capability due to the combination of systematic design and enhanced operating features. Significant design processes (i.e. development) or design features which contribute to this improved operability, include: Design Process: Project HFE Program Plan - intent, scope, timeliness and interfacing; HFE aspects of design process - procedures and instructions

  8. Development of the advanced CANDU reactor control centre

    International Nuclear Information System (INIS)

    Malcolm, S.; Leger, R.

    2004-01-01

    The next generation CANDU control centre is being designed for the Advanced CANDU Reactor (ACR) station. The design is based upon the recent Qinshan control room with further upgrades to meet customer needs with respect to high capacity factor with low Operation, Maintenance and Administration (OM and A) costs. This evolutionary design includes the long proven functionality at several existing CANDU control centres such as the 4-unit station at Darlington, with advanced features made possible by new control and display technology. Additionally, ACR control centres address characteristics resulting from Human Factors Engineering (HFE) analysis of control centre operations in order to further enhance personnel awareness of system and plant status. Statistics show that up to 70% of plant significant events, which have caused plant outages, have a root cause attributable to the human from such sources as complex interfaces, procedures, maintenance and management practices. Consequently, special attention is made for the application of HFE throughout the ACR design process. The design process follows a systematic analytical approach to define operations staff information and information presentation requirements. The resultant human-system interfaces (HSI) such as those for monitoring, annunciation and control information are then verified and validated against the system design requirements to provide a high confidence level that adequate and correct information is being provided in a timely manner to support the necessary operational tasks. The ACR control centre provides plant staff with an improved operability capability due to the combination of systematic design and enhanced operating features. Significant design processes (i.e. development) or design features which contribute to this improved operability, include: Design Process: Project HFE Program Plan - intent, scope, timeliness and interfacing; HFE aspects of design process - procedures and instructions

  9. Humanitarian engineering in the engineering curriculum

    Science.gov (United States)

    Vandersteen, Jonathan Daniel James

    There are many opportunities to use engineering skills to improve the conditions for marginalized communities, but our current engineering education praxis does not instruct on how engineering can be a force for human development. In a time of great inequality and exploitation, the desire to work with the impoverished is prevalent, and it has been proposed to adjust the engineering curriculum to include a larger focus on human needs. This proposed curriculum philosophy is called humanitarian engineering. Professional engineers have played an important role in the modern history of power, wealth, economic development, war, and industrialization; they have also contributed to infrastructure, sanitation, and energy sources necessary to meet human need. Engineers are currently at an important point in time when they must look back on their history in order to be more clear about how to move forward. The changing role of the engineer in history puts into context the call for a more balanced, community-centred engineering curriculum. Qualitative, phenomenographic research was conducted in order to understand the need, opportunity, benefits, and limitations of a proposed humanitarian engineering curriculum. The potential role of the engineer in marginalized communities and details regarding what a humanitarian engineering program could look like were also investigated. Thirty-two semi-structured research interviews were conducted in Canada and Ghana in order to collect a pool of understanding before a phenomenographic analysis resulted in five distinct outcome spaces. The data suggests that an effective curriculum design will include teaching technical skills in conjunction with instructing about issues of social justice, social location, cultural awareness, root causes of marginalization, a broader understanding of technology, and unlearning many elements about the role of the engineer and the dominant economic/political ideology. Cross-cultural engineering development

  10. Institute for Communication, General Services, Administration

    International Nuclear Information System (INIS)

    Legrain, C.

    2007-01-01

    The article describes the key activities of the Institute for Communication, General Services and Administration (CSA) of the Belgian Nuclear Research Centre SCK-CEN. CSA deals with communication and knowledge management and co-ordinates courses on the fundamentals and applications of nuclear research. CSA also comprises the administrative, financial, logistic and central technical services, as well as human resources and ICT

  11. Broadening of nuclear engineering programs: An engineering physics approach at Rensselaer

    International Nuclear Information System (INIS)

    Malaviya, B.K.

    1990-01-01

    With the maturing of nuclear engineering as an academic discipline and the uncertainty surrounding the nuclear industry, attention is being increasingly turned to ways in which the base of traditional nuclear engineering programs in universities can be broadened to make them more attractively useful to a wider class of potential students and employers while maintaining the strengths in mainstream areas of nuclear technology. An approach that seems to provide a natural evolution combining the existing programmatic strengths, infrastructure, and resources with the trending needs of a broad segment of diversified industries is the development and initiation of an engineering physics degree program as an adjunct to an established nuclear engineering curriculum. In line with these developments, a new comprehensive academic program offering baccalaureate, master's, and doctoral degrees in engineering physics has been developed and formally instituted at Rensselaer Polytechnic Institute (RPI). It provides a valuable opportunity for students to pursue education and research that cuts across traditional disciplinary lines, leading to a wide variety of career opportunities in industry, government, national research and defense laboratories, and academia

  12. Architectural Engineers

    DEFF Research Database (Denmark)

    Petersen, Rikke Premer

    engineering is addresses from two perspectives – as an educational response and an occupational constellation. Architecture and engineering are two of the traditional design professions and they frequently meet in the occupational setting, but at educational institutions they remain largely estranged....... The paper builds on a multi-sited study of an architectural engineering program at the Technical University of Denmark and an architectural engineering team within an international engineering consultancy based on Denmark. They are both responding to new tendencies within the building industry where...... the role of engineers and architects increasingly overlap during the design process, but their approaches reflect different perceptions of the consequences. The paper discusses some of the challenges that design education, not only within engineering, is facing today: young designers must be equipped...

  13. Education and Training possibilities at the Belgian Nuclear Research Centre SCK-CEN

    International Nuclear Information System (INIS)

    Coeck, M.

    2007-01-01

    Thanks to its thorough experience in the field of peaceful applications of nuclear science and technology SCK-CEN has garnered a reputation as an outstanding centre of not only research, but also education and training (E and T). The E and T activities at SCK-CEN cover a. o. reactor physics, reactor operation, reactor engineering, radiation protection, decommissioning and waste management. Our courses are directed to the nuclear industry, the medical and the non-nuclear industry, national and international policy organizations, the academic world and the general public. E and T programs are also organized in cooperation with universities, technical universities, nuclear power plants and public and private health services. In addition, the SCK-CEN is involved in international E and T research networks and programs such as ENETRAP, EUTERP, EUNDETRAF, CETRAD, BNEN and ENEN. Next to courses, SCK-CEN also offers students the possibility to perform their research work at our laboratories. Final-year students and Ph.D. candidates can enter a programme defined by an SCK-CEN mentor, in close collaboration with a university promotor. Post-docs are mainly recruited in specialised research domains that reflect the priority programmes and R and D topics of our institute

  14. Ukrainian Nuclear Data Centre Progress Report, 2011/12. Summary of Nuclear Data Studies by Staff of the Ukrainian Nuclear Data Centre

    International Nuclear Information System (INIS)

    Gritzay, O.

    2012-01-01

    This report contains the short review of the main fields of nuclear data activity of the Ukrainian Nuclear Data Centre (UkrNDC) and main results obtained. UkrNDC is subdivision within the Neutron Physics Department of the Institute for Nuclear Research of the National Academy of Sciences of Ukraine. UkrNDC has 5 permanent researchers. During year under review three members of the staff were involved in experimental neutron data measurements at the Kyiv research reactor. (author)

  15. Gearing up for transportation engineering, a summer institute : phase IX.

    Science.gov (United States)

    2009-02-01

    The numbers of female and minority students enrolled in engineering schools are increasing slowly, however there is still a relatively small percentage drawn to the field of transportation civil engineering. As a consequence, there is a need to educa...

  16. Gearing up for transportation engineering, a summer institute : phase 2

    Science.gov (United States)

    2001-12-31

    The numbers of female and minority students enrolled in engineering schools are increasing slowly; however, a relatively small percentage of these students are drawn to the field of transportation engineering. For this reason, there is a need to educ...

  17. List of publications of Karlsruhe University (T.H.) and Karlsruhe Nuclear Research Centre

    International Nuclear Information System (INIS)

    1977-01-01

    This 19th volume of the list of publications compiled by Karlsruhe University (T.H.) in cooperation with Karlsruhe Nuclear Research Centre and some other institutions closely connected with the university gives the publications of the year 1976 as well as some supplements from 1975. The publications listed are books and journals, articles from journals and symposia, research reports, dissertations and theses for habilitation published by these institutions, their organs and institutes, their staff and scientific personnel, as well as patents. As a rule, theses for diplomas, newspaper articles, book reviews, internal reports and information have been left out. (orig.) [de

  18. The didactic configuration of teaching strategies with Information and communication technology in pedagogical practices of the engineering made in two Mexican higher education institutions

    Directory of Open Access Journals (Sweden)

    Martha Patricia ASTUDILLO TORRES

    2016-07-01

    Full Text Available In this article explains the didactic configuration of teaching strategies with information and communications technology (ICT that designs and implements the higher education teachers in their educational practice, with the objective of facilitating the curricula of three subjects belonging to the careers of civil Engineering and environmental Engineering of the two most important institutions of higher education of the state of Chiapas, Mexico. Similarly, it exposed a categorization of teaching strategies with ICT emerged from the ethnographic study carried out in these Mexican universities.

  19. A computational study of free-piston diesel engine combustion

    Energy Technology Data Exchange (ETDEWEB)

    Mikalsen, R.; Roskilly, A.P. [Sir Joseph Swan Institute for Energy Research, Newcastle University, Devonshire Building, Newcastle upon Tyne, NE1 7RU (United Kingdom)

    2009-07-15

    This paper investigates the in-cylinder gas motion, combustion process and nitrogen oxide formation in a free-piston diesel engine and compares the results to those of a conventional engine, using a computational fluid dynamics engine model. Enhanced radial gas flow (squish and reverse squish) around top dead centre is found for the free-piston engine compared to a conventional engine, however it is found that this has only minor influence on the combustion process. A higher heat release rate from the pre-mixed combustion phase due to an increased ignition delay was found, along with potential reductions in nitrogen oxides emissions formation for the free-piston engine. (author)

  20. Sud du Sahara | Page 232 | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Sud du Sahara. Sud du Sahara. Read more about Démarches novatrices en ce qui a trait à la délégation des tâches en santé mentale. Langue French. Read more about Institutional Support: Centre for Economic and Social Research, Education and Documentation (Burkina Faso). Langue English. Read more about ...

  1. An Engineering Degree Does Not (Necessarily) an Engineer Make: Career Decision Making among Undergraduate Engineering Majors. Research Brief

    Science.gov (United States)

    Lichtenstein, Gary; Loshbaugh, Heidi G.; Claar, Brittany; Chen, Helen L.; Jackson, Kristyn; Sheppard, Sheri

    2009-01-01

    This paper explores the career-related decision making of seniors enrolled in undergraduate engineering programs at two nationally recognized institutions. This strand of the Academic Pathways Study (APS) research revealed that many engineering students were undecided about their career plans, even late into their senior years and that many were…

  2. Advanced Transportation Institute 2008.

    Science.gov (United States)

    2009-02-01

    The seventh version of the Advanced Transportation Institute (ATI-08) was conducted in 2008 to encourage high school students to pursue careers in the field of transportation engineering. The University Transportation Center for Alabama partnered wit...

  3. Advanced Transportation Institute 2009.

    Science.gov (United States)

    2009-09-01

    The eighth version of the Advanced Transportation Institute (ATI-09) was conducted in 2009 to encourage high school students to pursue careers in the field of transportation engineering. The University Transportation Center for Alabama partnered with...

  4. Manche centre

    International Nuclear Information System (INIS)

    1997-05-01

    After a general presentation of radioactivity and radioactive wastes and of the French national agency for the management of radioactive wastes (ANDRA), this brochure gives a general overview of the Manche low- and medium-level radioactive waste disposal centre: principles of storage safety, waste containers (first confinement barrier), storage facility and cover (second confinement barrier), the underground (third confinement barrier), the impact of the centre on its environment, and the control of radioactivity in the vicinity of the centre. (J.S.)

  5. Effect of an isotropic outflow from the Galactic Centre on the bow-shock evolution along the orbit

    Czech Academy of Sciences Publication Activity Database

    Zajaček, Michal; Eckart, A.; Karas, Vladimír; Kunneriath, Devaky; Shahzamanian, B.; Sabha, N.; Muzic, K.; Valencia-S, M.

    2016-01-01

    Roč. 455, č. 2 (2016), s. 1257-1274 ISSN 0035-8711 R&D Projects: GA ČR(CZ) GC13-00070J Institutional research plan: CEZ:AV0Z1003909 Institutional support: RVO:67985815 Keywords : galactic centre * black hole * bow-shock Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 4.961, year: 2016

  6. Engineering a General Education Program: Designing Mechanical Engineering General Education Courses

    Science.gov (United States)

    Fagette, Paul; Chen, Shih-Jiun; Baran, George R.; Samuel, Solomon P.; Kiani, Mohammad F.

    2013-01-01

    The Department of Mechanical Engineering at our institution created two engineering courses for the General Education Program that count towards second level general science credit (traditional science courses are first level). The courses were designed for the general student population based upon the requirements of our General Education Program…

  7. C-NET: the Centre for Nuclear Energy Technology

    International Nuclear Information System (INIS)

    Roberts, J.W.

    2011-01-01

    The Centre for Nuclear Energy Technology was established as part of the Dalton Nuclear Institute at The University of Manchester in 2009 to focus the UK research on front-end nuclear technologies. This includes plant-life extension, new build, naval propulsion and next generation reactors. Building on £4M of government funding through the North West Development Agency (NWDA), C-NET will act as a hub for nuclear research in the North West of England collaborating with both universities and industry. (author)

  8. IAEA To Launch Centre On Ocean Acidification

    International Nuclear Information System (INIS)

    2012-01-01

    Full text: The International Atomic Energy Agency (IAEA) is to launch a new centre this summer to address the growing problem of ocean acidification. Operated by the Agency's Monaco Environmental Laboratories, the Ocean Acidification International Coordination Centre will serve the scientific community - as well as policymakers, universities, media and the general public - by facilitating, promoting and communicating global actions on ocean acidification. Growing amounts of carbon dioxide in the Earth's atmosphere are being absorbed in the planet's oceans which increases their acidity. According to the experts, ocean acidification may render most regions of the ocean inhospitable to coral reefs by 2050 if atmospheric carbon dioxide levels continue to increase. This could lead to substantial changes in commercial fish stocks, threatening food security for millions of people as well as the multi-billion dollar fishing industry. International scientists have been studying the effect and possible responses, and the new centre will help coordinate their efforts. ''During the past five years, numerous multinational and national research projects on ocean acidification have emerged and significant research advances have been made,'' said Daud bin Mohamad, IAEA Deputy Director General for Nuclear Sciences and Applications. ''The time is now ripe to provide international coordination to gain the greatest value from national efforts and research investments.'' The centre will be supported by several IAEA Member States and through the Peaceful Uses Initiative, and it will be overseen by an Advisory Board consisting of leading institutions, including the U.N. Intergovernmental Oceanographic Commission, the U.S. National Oceanic and Atmospheric Administration, the U.N. Food and Agriculture Organization, the Fondation Prince Albert II de Monaco, the OA-Reference User Group, as well as leading scientists and economists in the field. The new centre will focus on international

  9. Sex segregation in undergraduate engineering majors

    Science.gov (United States)

    Litzler, Elizabeth

    Gender inequality in engineering persists in spite of women reaching parity in college enrollments and degrees granted. To date, no analyses of educational sex segregation have comprehensively examined segregation within one discipline. To move beyond traditional methods of studying the long-standing stratification by field of study in higher education, I explore gender stratification within one field: engineering. This dissertation investigates why some engineering disciplines have a greater representation of women than other engineering disciplines. I assess the individual and institutional factors and conditions associated with women's representation in certain engineering departments and compare the mechanisms affecting women's and men's choice of majors. I use national data from the Engineering Workforce Commission, survey data from 21 schools in the Project to Assess Climate in Engineering study, and Carnegie Foundation classification information to study sex segregation in engineering majors from multiple perspectives: the individual, major, institution, and country. I utilize correlations, t-tests, cross-tabulations, log-linear modeling, multilevel logistic regression and weighted least squares regression to test the relative utility of alternative explanations for women's disproportionate representation across engineering majors. As a whole, the analyses illustrate the importance of context and environment for women's representation in engineering majors. Hypotheses regarding hostile climate and discrimination find wide support across different analyses, suggesting that women's under-representation in certain engineering majors is not a question of choice or ability. However, individual level factors such as having engineering coursework prior to college show an especially strong association with student choice of major. Overall, the analyses indicate that institutions matter, albeit less for women, and women's under-representation in engineering is not

  10. Marketing based on knowledge as a basis for strategy of research institution – on the example of the Packaging Research Institute

    Directory of Open Access Journals (Sweden)

    Stanislaw Tkaczyk

    2013-09-01

    Full Text Available Basis for marketing activities of COBRO – Packaging Research Institute are two main issues. First of all, as a small research and development centre, COBRO has no funds to carry out specialized marketing department. On the other hand, due to huge growth of packaging market, all needs of stakeholders – companies but also other research institutions seeking consortium members – cannot be entirely identified or forecasted, and practical solutions are created in the course of cooperation. For all that reasons Institute has developed its own concept of the knowledge-based marketing, which means more flexible use of the potential of academics and research employees.

  11. Availability and Quantity of Human and Material Resources of Nigerian Universities' HIV Youth Friendly Centres: Implication for Policy Implementation

    Directory of Open Access Journals (Sweden)

    A.G. Akintomide

    2017-12-01

    Full Text Available The study assessed the availability and quality of human and material resources at the Campus-based Youth Friendly Centres in Southwestern Nigeria. The survey research design was adopted and the study was carried out among ten counsellors and centre coordinators of Youth Friendly Centres in four higher institutions of learning in Southwest Nigeria using interview guide and observation checklist to collect data. The result revealed that there were no enough counsellors at the YFCs and some of the counsellors available at the centres did not have enough qualification to render HIV counselling. It was also revealed that material resources were moderately available at most of the centres but not up to the require standard stipulated by the World Health Organization.

  12. Booklet of the Research Institute of Clinical Medicine

    International Nuclear Information System (INIS)

    Todua, F.; Jgamadze, N.; Todua, N.; Beriashvili, Z.; Chelishvili, M.; Todua, I.; Chovelidze, Sh. et al.

    2012-01-01

    Research Institute of Clinical Medicine is one of the biggest university diagnostic and treatment centre in Georgia with unique modern diagnostic and treatment apparatus. The institute is acknowledged as a leader in various trends of radiology and surgery. The Research Institute of Clinical Medicine was founded in 1991. It is the leading scientific establishment in the field of medicine. The scientific-research work of the Institute is coordinated by the National Academy of Sciences of Georgia. The main scientific trend of the Institute is the Early Complex Diagnostics and Treatment. The scientific activity of the Institute is led by the Scientific Council. Institute achieved remarkable success since its foundation: It has been defended 56 theses for Candidate of Medical Sciences and 16 for Doctor of Medical Sciences; About 30 post-graduate students and more than 200 radiologists have taken training courses in radiology. Nowadays they work in different regions of Georgia, 21 inventions took out patents. It has been published 2000 scientific works and 9 monographs. (authors)

  13. Developing SoTL through Organized Scholarship Institutes

    Directory of Open Access Journals (Sweden)

    Elizabeth Marquis

    2015-12-01

    Full Text Available The need to further integrate SoTL into college and university cultures has been discussed relatively frequently in recent teaching and learning literature. While a number of useful strategies to assist in this task have been advanced, one especially promising suggestion is the development of organized, institutionally-recognized scholarship institutes. Centres or units of this sort have been created at higher education institutions in a number of countries, but little published information currently exists about the design of these institutes or the experiences of individuals affiliated with them. To that end, the present study sought to examine the perceived benefits, challenges and design features of teaching and learning scholarship institutes at research-intensive universities worldwide. A website scan and a survey of individuals affiliated with these units were used to collect qualitative and quantitative data of relevance to the research questions. Based on the findings, and on ideas from the existing research institute and scholarship of teaching and learning literatures, a series of recommendations for individuals and campuses interested in developing effective SoTL institutes are provided.

  14. Out-of-pocket expenditure on institutional delivery in India.

    Science.gov (United States)

    Mohanty, Sanjay K; Srivastava, Akanksha

    2013-05-01

    Though promotion of institutional delivery is used as a strategy to reduce maternal and neonatal mortality, about half of the deliveries in India are conducted at home without any medical care. Among women who deliver at home, one in four cites cost as barrier to facility-based care. The relative share of deliveries in private health centres has increased over time and the associated costs are often catastrophic for poor households. Though research has identified socio-economic, demographic and geographic barriers to the utilization of maternal care, little is known on the cost differentials in delivery care in India. The objective of this paper is to understand the regional pattern and socio-economic differentials in out-of-pocket (OOP) expenditure on institutional delivery by source of provider in India. The study utilizes unit data from the District Level Household and Facility Survey (DLHS-3), conducted in India during 2007-08. Descriptive statistics, principal component analyses and a two-part model are used in the analyses. During 2004-08, the mean OOP expenditure for a delivery in a public health centre in India was US$39 compared with US$139 in a private health centre. The predicted expenditure for a caesarean delivery was six times higher than for a normal delivery. With an increase in the economic status and educational attainment of mothers, the propensity and rate of OOP expenditure increases, linking higher OOP expenditure to quality of care. The OOP expenditure in public health centres, adjusting for inflation, has declined over time, possibly due to increased spending under the National Rural Health Mission. Based on these findings, we recommend that facilities in public health centres of poorly performing states are improved and that public-private partnership models are developed to reduce the economic burden for households of maternal care in India.

  15. Career Development in Nuclear Engineering

    International Nuclear Information System (INIS)

    Sibbens, G.

    2015-01-01

    In the eighties it was not common for girls to study engineering. But a few young girls have always been fascinated by science and technical applications and dared to go for a gender untypical education. What are these female engineers doing today? This paper describes the career development of a woman, who completed her Master of Science in Nuclear Engineering, found first a job in an international company as cooperator in the research group of radiation physics and later as head of technical support and quality assurance of medical systems and then succeeded in a competition to be recruited at the European Commission (EC). There she started as an assistant for the primary standardisation of radionuclides and high-resolution alpha-particle spectrometry including the preparation of radioactive sources in the radionuclide metrology sector at the Institute for Reference Materials and Measurements of the European Commission’s Joint Research Centre and consequently published her work in scientific journals. Today, 29 years later, I am the laboratory responsible for the preparation and characterisation of nuclear targets at EC-JRC-IRMM, leading a team that has unique know-how in the preparation of thin film deposits (called targets) tailor-made for nuclear physics measurements at the EC–JRC–IRMM and international accelerator sites. High quality measurements of nuclear data and materials are being asked for in the context of nuclear safety, minimisation of high level nuclear waste and safeguards and security. The different steps of my career development and the repeated process of managing learning, work, family and leisure are presented. The career path across different jobs and responsibilities and the career progress via a certification training programme are also explained to encourage the next generation of female professionals to continue playing a vital role in nuclear science and technology. (author)

  16. Research Centre for the Study of the Rogue Waves

    Science.gov (United States)

    Shamin, Roman

    2013-04-01

    In 2012, in Sakhalin (Russia) was established Research Center for the Study of the Rogue Waves. This center unites many known scientists, who study rogue waves. The center is founded by the following scientific organizations: - The Institute of Marine Geology and Geophysics of FEB RAS - The Far Eastern Federal University - Special Research Bureau for Automation of Marine Researches of FEB RAS - The Institute of Applied Physics of RAS - Shirshov Institute of Oceanology of RAS Heads this center Dr. Roman V. Shamin (Russia). Topics projects: - Probability of emergence of rogue waves - Finding of the sites of the Ocean most dangerous from the point of view of rogue waves - Assessment of risk of dangerous impact of rogue waves - and many others... Our Center is open for new participants from all countries. Our Centre have web-site: roguewaves.ru For contacts: center@roguewaves.ru (Dr. Roman Shamin)

  17. The ideal Atomic Centre; Le Centre Atomique ideal

    Energy Technology Data Exchange (ETDEWEB)

    Mas, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The author presents considerations which should prove to be of interest to all those who have to design, to construct and to operate a nuclear research centre. A large number of the ideas presented can also be applied to non-nuclear scientific research centres. In his report the author reviews: various problems with which the constructor is faced: ground-plan, infrastructure, buildings and the large units of scientific equipment in the centre, and those problems facing the director: maintenance, production, supplies, security. The author stresses the relationship which ought to exist between the research workers and the management. With this aim in view he proposes the creation of National School for Administration in Research which would train administrative executives for public or private organisations; they would be specialised in the fields of fundamental or applied research. (author) [French] L'auteur propose une base de reflexions a tous ceux qui doivent concevoir, realiser et faire vivre un Centre d'Etudes Nucleaires. Un grand nombre des idees exprimees peut d'ailleurs s'appliquer a un Centre d'Etudes Scientifiques non nucleaires. Dans son ouvrage, l'auteur passe en revue les differents problemes qui se posent au constructeur: plan, masse, infrastructure, batiments et grands appareils du Centre, et ceux qu'a a resoudre le directeur: entretien, fabrication, approvisionnements, securite. L'auteur insiste sur l'aspect des rapports qui doivent exister entre les chercheurs et ceux qui les administrent. Il propose a cette fin la creation d'une Ecole Nationale d'Administration de la Recherche qui formerait des cadres administratifs pour les organismes publics ou prives, specialises dans la Recherche fondamentale ou appliquee. (auteur)

  18. The China Institute of Atomic Energy

    International Nuclear Information System (INIS)

    Fan Mingwu

    2001-01-01

    The China Institute of Atomic Energy (CIAE), established in 1950, carries out multidisciplinary research in nuclear science, technology and engineering. It has three research reactors and ten low energy accelerators. The focus of its nuclear energy related R and D is on reactor engineering and technology. In the area of nuclear techniques for applications, R and D is carried out on accelerators, isotope production, nuclear electronics and utilization of radioisotopes and radiation. There is also a strong programme in basic nuclear physics and radiochemistry. New major facilities under construction in CIAE include China Advanced Research Reactor (flux 8x10 14 n/cm 2 /sec) and China Experimental Fast Reactor. China has been successfully using the products of its R and D for a variety of applications in medicine, industry, materials science etc. A dynamic research programme is tuned to attract young talent to CIEA and there is good collaboration with the Beijing University. CIEA has been an active participant of RCA programmes of the IAEA and has been a resource for many developing countries. The management expects the Institute to be a leading multidisciplinary institute in the field of nuclear science, technology and engineering. (author)

  19. A review on chitosan centred scaffolds and their applications in tissue engineering.

    Science.gov (United States)

    Ahmed, Shakeel; Annu; Sheikh, Javed; Ali, Akbar

    2018-05-03

    The diversity and availability of biopolymer and increased clinical demand for safe scaffolds lead to an increased interest in fabricating scaffolds in order to achieve fruitful progress in tissue engineering. Due to biocompatibility, biodegradability, inherent antimicrobial character, chitosan has drawn ample consideration in recent years. Chitosan is a biopolymer obtained by de-acetylation of chitin extracted from shells of crustaceans and fungi. Due to the presence of reactive functionality in the molecular chain chitosan can be modified either chemically or physically to fabricate the tailor-made scaffolds having desired properties for tissue engineering centered applications. In this review chitosan, its properties and role either virgin, chemically or physically modified, 2D or 3D scaffolds for tissue engineering application have been highlighted. Copyright © 2017. Published by Elsevier B.V.

  20. Gene therapy for cartilage and bone tissue engineering

    CERN Document Server

    Hu, Yu-Chen

    2014-01-01

    "Gene Therapy for Cartilage and Bone Tissue Engineering" outlines the tissue engineering and possible applications of gene therapy in the field of biomedical engineering as well as basic principles of gene therapy, vectors and gene delivery, specifically for cartilage and bone engineering. It is intended for tissue engineers, cell therapists, regenerative medicine scientists and engineers, gene therapist and virologists. Dr. Yu-Chen Hu is a Distinguished Professor at the Department of Chemical Engineering, National Tsing Hua University and has received the Outstanding Research Award (National Science Council), Asia Research Award (Society of Chemical Engineers, Japan) and Professor Tsai-Teh Lai Award (Taiwan Institute of Chemical Engineers). He is also a fellow of the American Institute for Medical and Biological Engineering (AIMBE) and a member of the Tissue Engineering International & Regenerative Medicine Society (TERMIS)-Asia Pacific Council.

  1. Retraining the Modern Civil Engineer.

    Science.gov (United States)

    Priscoli, Jerome Delli

    1983-01-01

    Discusses why modern engineering requires social science and the nature of planning. After these conceptional discussions, 12 practical tools which social science brings to engineering are reviewed. A tested approach to training engineers in these tools is then described. Tools include institutional analysis, policy profiling, and other impact…

  2. Factors controlling the redox potential of ZnCe6 in an engineered bacterioferritin photochemical 'reaction centre'.

    Science.gov (United States)

    Mahboob, Abdullah; Vassiliev, Serguei; Poddutoori, Prashanth K; van der Est, Art; Bruce, Doug

    2013-01-01

    Photosystem II (PSII) of photosynthesis has the unique ability to photochemically oxidize water. Recently an engineered bacterioferritin photochemical 'reaction centre' (BFR-RC) using a zinc chlorin pigment (ZnCe6) in place of its native heme has been shown to photo-oxidize bound manganese ions through a tyrosine residue, thus mimicking two of the key reactions on the electron donor side of PSII. To understand the mechanism of tyrosine oxidation in BFR-RCs, and explore the possibility of water oxidation in such a system we have built an atomic-level model of the BFR-RC using ONIOM methodology. We studied the influence of axial ligands and carboxyl groups on the oxidation potential of ZnCe6 using DFT theory, and finally calculated the shift of the redox potential of ZnCe6 in the BFR-RC protein using the multi-conformational molecular mechanics-Poisson-Boltzmann approach. According to our calculations, the redox potential for the first oxidation of ZnCe6 in the BRF-RC protein is only 0.57 V, too low to oxidize tyrosine. We suggest that the observed tyrosine oxidation in BRF-RC could be driven by the ZnCe6 di-cation. In order to increase the efficiency of tyrosine oxidation, and ultimately oxidize water, the first potential of ZnCe6 would have to attain a value in excess of 0.8 V. We discuss the possibilities for modifying the BFR-RC to achieve this goal.

  3. Utilizing Civil Engineering Senior Design Capstone Projects to Evaluate Students' Sustainability Education across Engineering Curriculum

    Science.gov (United States)

    Dancz, Claire L. A.; Ketchman, Kevin J.; Burke, Rebekah D.; Hottle, Troy A.; Parrish, Kristen; Bilec, Melissa M.; Landis, Amy E.

    2017-01-01

    While many institutions express interest in integrating sustainability into their civil engineering curriculum, the engineering community lacks consensus on established methods for infusing sustainability into curriculum and verified approaches to assess engineers' sustainability knowledge. This paper presents the development of a sustainability…

  4. Proposal for the establishment of an International Centre for Resource Management (ICRM)

    International Nuclear Information System (INIS)

    Islam, S.

    1999-01-01

    Energy and physical resources are necessary for development. These resources are not scarce. What is scarce is Technology. Technology is not only machines, it is also knowledge to run these machines. Most of the developing countries waste whatever resources they do have because of a lack of scientists, technologists and modern management. The main reason for underdevelopment of the poor countries is their weak linkage to modern science and technology. The scientists in the developing countries are isolated. Science cannot survive, let alone flourish, in isolation. The International Centre for Theoretical Physics in Trieste, Italy (ICTP) was established to end scientific isolation and to stop brain drain. The centre was established in 1964 under the auspices of the International Atomic Energy Agency (IAEA). Now the centre's Management is run by the United Nations Educational, Scientific and Cultural Organization (UNESCO), ICTP in Trieste started in 1964 with a budget of US$ 355,000. The building was donated by the Government of Italy. Now its budget is about US$ 20 million (90 per cent from Italy). About 4,000 scientists visit the centre every year. Since its establishment about 40,000 scientists from developing countries and 20,000 from developed countries have visited ICTP. The principal purpose of the proposed International Centre for Resource Management will be to foster through seminars, conferences, teaching and research the advancement of better resource utilization and environmental protection in the less developed countries. An international teaching and research institute dealing in energy policy, research and project management, electronic communication, hydrology, water resource management, soil science, climatology, meteorology, oceanography and desertification will provide the developing countries with expertise needed for successful development policy. Since it happens that the major advance in these fields have relevance for development, aid giving

  5. Journal of the Ghana Institution of Engineers: Submissions

    African Journals Online (AJOL)

    The Journal is published bi-annually and readership includes engineering ... Original research papers, technical reports, "state-of-the-art" reviews and ... An electronic copy in MS Word, MS Excel format shall be required after the final revision.

  6. Development of security engineering curricula at US universities

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, M.L.

    1998-08-01

    The Southwest Surety Institute was formed in June 1996 by Arizona State University (ASU), New Mexico Institute of Mining and Technology (NM Tech), New Mexico State University (NMSU), and Sandia National Laboratories (SNL) to provide educational programs in Security Engineering, and to conduct research and development in security technologies. This is the first science-based program of its kind in the US, focused on educating Security Engineers to help government and industry address their security needs. Each member brings a unique educational capability to the Institute. NM Tech has a formidable explosives testing and evaluation facility. ASU is developing a Masters program in Security Engineering at their School of Technology located on a new campus in Mesa, Arizona. NMSU provides a Security Technology minor, merging programs in Criminal Justice and Engineering Technology. The Sandia National Laboratories security system design and evaluation process forms the basis for the Security Engineering curricula. In an effort to leverage the special capabilities of each university, distance education will be used to share courses among Institute members and eventually with other sites across the country.

  7. Predictors of Associate's Degree Completion in Engineering and Engineering Technologies

    Science.gov (United States)

    Reys-Nickel, Lynsey L.

    The purpose of this ex post facto study was to describe completers and non-completers of associate's degree programs in engineering and engineering technologies and determine whether and to what extent completion in these programs is a function of selected student-related variables and institutional variables. Data from the 2004/2009 Beginning Postsecondary Students Longitudinal Study (BPS: 04/09) of associate's degree completers and non-completers in engineering and engineering technologies were accessed and analyzed through PowerStats, a web-based data analysis tool from National Center for Education Statistics (NCES). Descriptive data indicated that, proportionally, engineering and engineering technologies completers were mostly White, married, middle income, employed part-time, enrolled full-time, did not hold a high school diploma or certificate, completed Trigonometry/Algebra II, had a father who's highest education level was an associate's degree, but did not know their mother's highest level of education, completed remedial coursework, and started college with the goal of earning an associate's degree. While more males enrolled in the programs, males and females demonstrated similar completion rates, proportionally--with females showing a slightly higher percentage of completion. Results from the logistic regression further indicated that the variables significant to completion in associate's degree programs in engineering and engineering technologies were gender and enrollment size. Findings suggested that female students were more likely to earn the degree, and that the larger the institution, the more likely the student would become a completer. However, since a major limitation of the study was the small weighted sample size, the results of the study are inconclusive in terms of the extent to which the findings can be generalized to the population of students in associate's degree programs in engineering and engineering technologies. This study fills a

  8. 30th anniversary of Karlsruhe Nuclear Research Centre

    International Nuclear Information System (INIS)

    Koerting, K.

    1986-01-01

    One of the main goals in mind in 1956 when the Karlsruhe Nuclear Research Centre was founded, was to promote the peaceful uses of nuclear energy in the Federal Republic of Germany. The work accomplished since then by the various institutes of the Centre was particularly successful in the following: Development and construction of the first research reactor as an entirely national achievement; installation and operation of the MZFR reactor, as well as the compact sodium-cooled KNK reactor; the Nuclear Safety Project; the development of the separation nozzle method for uranium enrichment; and specific methods and equipment developed for safeguards systems to prevent nuclear materials diversion. Looking into the future, the tasks ahead will concentrate on the technology of energy generation by thermonuclear fusion, and on environmental pollution control and related methods, as well as industrial processes such as materials handling and process control by PDV and CAD. (orig./PW) [de

  9. Master’s degree in Nuclear Engineering UPC-ENDESA. Creating synergy at industrial and academic levels

    Energy Technology Data Exchange (ETDEWEB)

    Batet, I.; Calviño, F.; Duch, M.A.; Dies, J.; León, P.; Fernández-Olano, P.

    2015-07-01

    The Master’s degree in Nuclear Engineering, born from the alignment of objectives of Academy and Industry, aims to prepare competent engineers to assume managerial positions within the Nuclear Industry. MNE is completely taught in English. Synergies are established at both industrial and academic levels. MNE syllabus has been designed (and is being continuously improved) with the help of industrial partners and the Spanish Regulatory Body (CSN). One half of the lectures are delivered by professionals external to the university. Besides ENDESA, other companies (ANAV, AREVA, ENRESA, ENSA, ENUSA, IDOM, Nuclenor, Tecnatom, Westinghouse) collaborate in the master. Lecturers from CSN and CIEMAT (the major Spanish research centre) participate in the Master as well. A large portion of the master contents is delivered as Project Based Learning, In general, active learning and team work activities are thoroughly used so as to help the students achieve the learning objectives and acquire a number of soft skills required by industry. MNE is embedded in EMINE, the European Master in Nuclear Energy (European Institute of Technology, KIC-InnoEnergy). As well, MNE is part of a double degree in the Barcelona Engineering School (ETSEIB) with the official Master in Industrial Engineering (MUEI). Having in the same classroom EMINE and MNE students creates a good working atmosphere, while allowing the future engineers work in a multicultural and international environment. The double degree MNE-MUEI allows students to acquire the MNE competencies and, at the same time, legal engineering attributions. It has been useful to attract good engineering students to the master. (Author)

  10. Dosimetric inter-institutional comparison in European radiotherapy centres: Results of IAEA supported treatment planning system audit.

    Science.gov (United States)

    Gershkevitsh, Eduard; Pesznyak, Csilla; Petrovic, Borislava; Grezdo, Joseph; Chelminski, Krzysztof; do Carmo Lopes, Maria; Izewska, Joanna; Van Dyk, Jacob

    2014-05-01

    One of the newer audit modalities operated by the International Atomic Energy Agency (IAEA) involves audits of treatment planning systems (TPS) in radiotherapy. The main focus of the audit is the dosimetry verification of the delivery of a radiation treatment plan for three-dimensional (3D) conformal radiotherapy using high energy photon beams. The audit has been carried out in eight European countries - Estonia, Hungary, Latvia, Lithuania, Serbia, Slovakia, Poland and Portugal. The corresponding results are presented. The TPS audit reviews the dosimetry, treatment planning and radiotherapy delivery processes using the 'end-to-end' approach, i.e. following the pathway similar to that of the patient, through imaging, treatment planning and dose delivery. The audit is implemented at the national level with IAEA assistance. The national counterparts conduct the TPS audit at local radiotherapy centres through on-site visits. TPS calculated doses are compared with ion chamber measurements performed in an anthropomorphic phantom for eight test cases per algorithm/beam. A set of pre-defined agreement criteria is used to analyse the performance of TPSs. TPS audit was carried out in 60 radiotherapy centres. In total, 190 data sets (combination of algorithm and beam quality) have been collected and reviewed. Dosimetry problems requiring interventions were discovered in about 10% of datasets. In addition, suboptimal beam modelling in TPSs was discovered in a number of cases. The TPS audit project using the IAEA methodology has verified the treatment planning system calculations for 3D conformal radiotherapy in a group of radiotherapy centres in Europe. It contributed to achieving better understanding of the performance of TPSs and helped to resolve issues related to imaging, dosimetry and treatment planning.

  11. Mutual aid: native employment centre swings into action with help from industry

    International Nuclear Information System (INIS)

    Lorenz, A.

    1998-01-01

    Establishment of the First Nations Employment and Training Centre on the Tsuu Tina Reserve, near Calgary, was recently announced by the Indian Resource Council, an organization that represents most of Canada's oil and gas producing tribes. The Centre is a result of cooperation between the Council and the Canadian Association of Petroleum Producers (CAPP). Its objective is to identify training needs in the industry and then deliver the training commensurate with those needs. It will maintain a database of employment information, serve as a referral agency and work towards the overall goal of self-sufficiency. The training centre will be the hub of a wheel from which training programs at various First Nations colleges and reserves will branch off. Resources and expertise will be provided by the Southern Alberta Institute of Technology and the Petroleum Industry Training Service. Interest in the new Centre is high as more than 50 inquiries have been received in the first week following the announcement. Self-sufficiency is high on the Indian Resources Council's agenda. Not surprisingly, the new employment and training centre is seen as an important first step towards building a skilled work force that will, in due course, lead to self-sufficiency. The intensive consultation between First Nations leaders and industry representatives that preceded the establishment of the Centre is also expected to improve relations between the sometimes contradictory interests of industry and First Nations in the resource-rich countryside of western and northern Canada

  12. KLIMA 2050: a research-based innovation centre for risk reduction through climate adaptation of infrastructure and buildings

    Science.gov (United States)

    Solheim, Anders; Time, Berit; Kvande, Tore; Sivertsen, Edvard; Cepeda, Jose; Lappegard Hauge, Åshild; Bygballe, Lena; Almås, Anders-Johan

    2016-04-01

    Klima 2050 - Risk reduction through climate adaptation of buildings and infrastructure is a Centre for Research based Innovation (SFI), funded jointly by the Research Council of Norway (RCN) and the partners of the centre. The aim of Klima 2050 is to reduce the societal risks associated with climate changes, including enhanced precipitation and flood water exposure within the built environment. The Centre will strengthen companies' innovation capacity through a focus on long-term research. It is also a clear objective to facilitate close cooperation between Research & Development, performing companies, public entities, and prominent research groups. Emphasis will be placed on development of moisture-resilient buildings, storm-water management, blue-green solutions, mitigation measures for water-triggered landslides, socio-economic incentives and decision-making processes. Both extreme weather and gradual climatic changes will be addressed. The Centre consists of a consortium of 18 partners from three sectors: industry, public entities and research/education organizations. The partners from the industry/private sector include a variety of companies from the building industry. The public entities comprise the most important infrastructure owners in Norway (public roads, railroads, buildings, airports), as well as the directorate for water and energy. The research and education partners are SINTEF Building and Infrastructure, the Norwegian Business School, the Norwegian University of Science and Technology, the Norwegian Meteorological Institute, and the Norwegian Geotechnical Institute. This contribution presents the main research plans and activities of this Centre, which was started in 2015 and will run for 8 years, until 2023. The presentation also includes options for international cooperation in the Centre via PhD and postdoctoral positions, MSc projects and guest-researcher stays with Klima 2050 partners.

  13. The role of the Joint Research Centre from the European Commission in the European Structural Integrity Networks AMES, ENIQ and NESC

    International Nuclear Information System (INIS)

    Estorff, U. von; Torronen, K.

    1999-01-01

    Due to the reduction in many countries of the research budget for nuclear safety several European institutions and organisations and the Institute for Advanced Materials (IAM) of the Joint Research Centre (JRC) of the European Commission (EC) have developed co-operative programmes now organised into 'Networks' for mutual benefit. They include utilities, engineering companies, research and development (R and D) laboratories and regulatory bodies. These Networks are all organised and managed in a similar way, i.e. like the successful Programme for the Inspection of Steel Components (PISC). The IAM plays the role of Operating Agent, Reference Laboratory and Network Manager of these Networks: European Network on Ageing Materials Evaluation and Studies (AMES), European Network for Inspection Qualification (ENIQ) and Network for Evaluating Steel Components (NESC), each of them dealing with a specific aspect of fitness for purpose of materials in structural components. This article will describe how the network organisation works, which was the positive experience from the past, why the networks are a tool for integrating fragmented research in Europe and how they fit into the mission of the JRC and therefore follow the EC policy. (orig.)

  14. 1 April 2011 - Croatian Rudjer Boskovic Institute (RBI)Director-General D. Ramljak visiting CMS Control Centre in Meyrin with Collaboration Spokesperson G. Tonelli; signing the guest book with Head of International Relations F. Pauss and visiting LHC superconducting magnet test hall with L. Walckiers.

    CERN Multimedia

    Maximilien brice

    2011-01-01

    1 April 2011 - Croatian Rudjer Boskovic Institute (RBI)Director-General D. Ramljak visiting CMS Control Centre in Meyrin with Collaboration Spokesperson G. Tonelli; signing the guest book with Head of International Relations F. Pauss and visiting LHC superconducting magnet test hall with L. Walckiers.

  15. Regional cancer centre demonstrates voluntary conformity with the national Radiation Oncology Practice Standards.

    Science.gov (United States)

    Manley, Stephen; Last, Andrew; Fu, Kenneth; Greenham, Stuart; Kovendy, Andrew; Shakespeare, Thomas P

    2015-06-01

    Radiation Oncology Practice Standards have been developed over the last 10 years and were published for use in Australia in 2011. Although the majority of the radiation oncology community supports the implementation of the standards, there has been no mechanism for uniform assessment or governance. North Coast Cancer Institute's public radiation oncology service is provided across three main service centres on the north coast of NSW. With a strong focus on quality management, we embraced the opportunity to demonstrate conformity with the Radiation Oncology Practice Standards. The Local Health District's Clinical Governance units were engaged to perform assessments of our conformity with the standards and this was signed off as complete on 16 December 2013. The process of demonstrating conformity with the Radiation Oncology Practice Standards has enhanced the culture of quality in our centres. We have demonstrated that self-assessment utilising trained auditors is a viable method for centres to demonstrate conformity. National implementation of the Radiation Oncology Practice Standards will benefit individual centres and the broader radiation oncology community to improve the service delivered to our patients.

  16. Regional cancer centre demonstrates voluntary conformity with the national Radiation Oncology Practice Standards

    Energy Technology Data Exchange (ETDEWEB)

    Manley, Stephen, E-mail: stephen.manley@ncahs.health.nsw.gov.au; Last, Andrew; Fu, Kenneth; Greenham, Stuart; Kovendy, Andrew; Shakespeare, Thomas P [North Coast Cancer Institute, Lismore, New South Wales (Australia)

    2015-06-15

    Radiation Oncology Practice Standards have been developed over the last 10 years and were published for use in Australia in 2011. Although the majority of the radiation oncology community supports the implementation of the standards, there has been no mechanism for uniform assessment or governance. North Coast Cancer Institute's public radiation oncology service is provided across three main service centres on the north coast of NSW. With a strong focus on quality management, we embraced the opportunity to demonstrate conformity with the Radiation Oncology Practice Standards. The Local Health District's Clinical Governance units were engaged to perform assessments of our conformity with the standards and this was signed off as complete on 16 December 2013. The process of demonstrating conformity with the Radiation Oncology Practice Standards has enhanced the culture of quality in our centres. We have demonstrated that self-assessment utilising trained auditors is a viable method for centres to demonstrate conformity. National implementation of the Radiation Oncology Practice Standards will benefit individual centres and the broader radiation oncology community to improve the service delivered to our patients.

  17. Regional cancer centre demonstrates voluntary conformity with the national Radiation Oncology Practice Standards

    International Nuclear Information System (INIS)

    Manley, Stephen; Last, Andrew; Fu, Kenneth; Greenham, Stuart; Kovendy, Andrew; Shakespeare, Thomas P

    2015-01-01

    Radiation Oncology Practice Standards have been developed over the last 10 years and were published for use in Australia in 2011. Although the majority of the radiation oncology community supports the implementation of the standards, there has been no mechanism for uniform assessment or governance. North Coast Cancer Institute's public radiation oncology service is provided across three main service centres on the north coast of NSW. With a strong focus on quality management, we embraced the opportunity to demonstrate conformity with the Radiation Oncology Practice Standards. The Local Health District's Clinical Governance units were engaged to perform assessments of our conformity with the standards and this was signed off as complete on 16 December 2013. The process of demonstrating conformity with the Radiation Oncology Practice Standards has enhanced the culture of quality in our centres. We have demonstrated that self-assessment utilising trained auditors is a viable method for centres to demonstrate conformity. National implementation of the Radiation Oncology Practice Standards will benefit individual centres and the broader radiation oncology community to improve the service delivered to our patients

  18. Annual report 1991. Institute for Advanced Materials

    International Nuclear Information System (INIS)

    1992-01-01

    The Institute executed in 1991 the R and D programme on advanced materials of the Joint Research Centre and contributed to the programmes: reactor safety, radio-active waste management, fusion technology and safety, nuclear fuel and actinide research. The supplementary programme: Operation of the High Flux Reactor is presented in condensed form. A full report is published separately. (Author). refs., figs., tabs

  19. Measuring strategy of Support Centre RIVM for nuclear emergencies

    International Nuclear Information System (INIS)

    Pruppers, M.J.M.; Smetsers, R.C.G.M.

    1994-11-01

    The accident at the Chernobyl nuclear power station in April 1986 and its consequences were reason for the Dutch government to evaluate and improve the facilities and the preparedness for nuclear emergency management in the Netherlands. The results of the evaluation have been elaborated in operational terms in the National Plan for Nuclear Emergency Planning and Response (EPR). During an accident with radioactive material the Technical Information Group (TIG) coordinates the measuring activities of the so-called Support Centres. According to the EPR, measuring activities of Support Centre RIVM are focussed on the collection and processing of data on emissions, concentrations, depositions and radiation doses from soil and air. This report describes the measuring strategy of RIVM for nuclear emergencies. The measuring strategy and the measuring plan, the latter deduced from the measuring strategy, concentrate on explicit answers to the following central questions: what has to be measured, by whom, where, when and how, and why? The demands of the TIG and the specification of tasks and operational facilities of Support Centre RIVM are considered as starting-points, limiting conditions and constraints for the measuring strategy. These items are converted to explicit choices for the measuring strategy and the default measuring plan. This report further includes a list of contacts of Support Centre RIVM with other (research) institutes, inside and outside the Netherlands, which may be relevant during a nuclear emergency. 3 figs., 2 tabs., 22 refs

  20. CMS Centre at CERN

    CERN Multimedia

    2007-01-01

    A new "CMS Centre" is being established on the CERN Meyrin site by the CMS collaboration. It will be a focal point for communications, where physicists will work together on data quality monitoring, detector calibration, offline analysis of physics events, and CMS computing operations. Construction of the CMS Centre begins in the historic Proton Synchrotron (PS) control room. The historic Proton Synchrotron (PS) control room, Opened by Niels Bohr in 1960, will be reused by CMS to built its control centre. TThe LHC@FNAL Centre, in operation at Fermilab in the US, will work very closely with the CMS Centre, as well as the CERN Control Centre. (Photo Fermilab)The historic Proton Synchrotron (PS) control room is about to start a new life. Opened by Niels Bohr in 1960, the room will be reused by CMS to built its control centre. When finished, it will resemble the CERN Contro...

  1. A nuclear power plant system engineering workstation

    International Nuclear Information System (INIS)

    Mason, J.H.; Crosby, J.W.

    1989-01-01

    System engineers offer an approach for effective technical support for operation and maintenance of nuclear power plants. System engineer groups are being set up by most utilities in the United States. Institute of Nuclear Power operations (INPO) and U.S. Nuclear Regulatory Commission (NRC) have endorsed the concept. The INPO Good Practice and a survey of system engineer programs in the southeastern United States provide descriptions of system engineering programs. The purpose of this paper is to describe a process for developing a design for a department-level information network of workstations for system engineering groups. The process includes the following: (1) application of a formal information engineering methodology, (2) analysis of system engineer functions and activities; (3) use of Electric Power Research Institute (EPRI) Plant Information Network (PIN) data; (4) application of the Information Engineering Workbench. The resulting design for this system engineer workstation can provide a reference for design of plant-specific systems

  2. Human-centred Governance

    DEFF Research Database (Denmark)

    Bason, Christian

    2017-01-01

    Design approaches are now being applied all over the world as a powerful approach to innovating public policies and services. Christian Bason, author of Leading public design: Discovering human-centred governance, argues that by bringing design methods into play, public managers can lead change...... with citizens at the centre, and discover a new model for steering public organisations: human-centred governance....

  3. Operational flood forecasting system of Umbria Region "Functional Centre

    Science.gov (United States)

    Berni, N.; Pandolfo, C.; Stelluti, M.; Ponziani, F.; Viterbo, A.

    2009-04-01

    to the expected ground effects: ordinary, moderate and high. Particularly, hydrometric and rainfall thresholds for both floods and landslides alarms were assessed. Based on these thresholds, at the Umbria Region Functional Centre an automatic phone-call and SMS alert system is operating. For a real time flood forecasting system, at the CFD several hydrological and hydraulic models were developed. Three rainfall-runoff hydrological models, using different quantitative meteorological forecasts, are available: the event based models X-Nash (based on the Nash theory) and Mike-Drift coupled with the hydraulic model Mike-11 (developed by the Danish Hydraulic Institute - DHI); and the physically-based continuous model Mobidic (MOdello di Bilancio Idrologico DIstribuito e Continuo - Distributed and Continuous Model for the Hydrological Balance, developed by the University of Florence in cooperation with the Functional Centre of Tuscany Region). Other two hydrological models, using observed data of the real time hydrometeorological network, were implemented: the first one is the rainfall-runoff hydrological model Hec-Hms coupled with the hydraulic model Hec-Ras (United States Army Corps of Engineers - USACE). Moreover, Hec-Hms, is coupled also with a continuous soil moisture model for a more precise evaluation of the antecedent moisture condition of the basin, which is a key factor for a correct runoff volume evaluation. The second one is the routing hydrological model Stafom (STage FOrecasting Model, developed by the Italian Research Institute for Geo-Hydrological Protection of the National Research Council - IRPI-CNR). This model is an adaptive model for on-line stage forecasting for river branches where significant lateral inflow contributions occur and, up to now, it is implemented for the main Tiber River branch and it allows a forecasting lead time up to 10 hours for the downstream river section. Recently, during the period between December the 4th and the 16th 2008

  4. Prospects of biogas as dual fuel in small diesel engines

    International Nuclear Information System (INIS)

    Singh, Irvinder; Mittal, V.K.

    1992-01-01

    A study was conducted on diesel engines to find out the effect of induction rate of biogas on engine performance indices. The results of dual fuel engine performance was compared with diesel mode for various levels of biogas induction rate (0.3 to 7.2 l/s) engine load (20% to full load) and injection timing (20.6 to 48 before top dead centre). At full and 80% brake load, the best energy mix between diesel and biogas was 1.5:1 and 4:1 respectively. (author). 7 refs., 7 figs., 4 tabs

  5. Longitudinal Patent Analysis for Nanoscale Science and Engineering: Country, Institution and Technology Field

    International Nuclear Information System (INIS)

    Huang Zan; Chen Hsinchun; Yip, Alan; Ng, Gavin; Guo Fei; Chen Zhikai; Roco, Mihail C.

    2003-01-01

    Nanoscale science and engineering (NSE) and related areas have seen rapid growth in recent years. The speed and scope of development in the field have made it essential for researchers to be informed on the progress across different laboratories, companies, industries and countries. In this project, we experimented with several analysis and visualization techniques on NSE-related United States patent documents to support various knowledge tasks. This paper presents results on the basic analysis of nanotechnology patents between 1976 and 2002, content map analysis and citation network analysis. The data have been obtained on individual countries, institutions and technology fields. The top 10 countries with the largest number of nanotechnology patents are the United States, Japan, France, the United Kingdom, Taiwan, Korea, the Netherlands, Switzerland, Italy and Australia. The fastest growth in the last 5 years has been in chemical and pharmaceutical fields, followed by semiconductor devices. The results demonstrate potential of information-based discovery and visualization technologies to capture knowledge regarding nanotechnology performance, transfer of knowledge and trends of development through analyzing the patent documents

  6. Longitudinal Patent Analysis for Nanoscale Science and Engineering: Country, Institution and Technology Field

    Science.gov (United States)

    Huang, Zan; Chen, Hsinchun; Yip, Alan; Ng, Gavin; Guo, Fei; Chen, Zhi-Kai; Roco, Mihail C.

    2003-08-01

    Nanoscale science and engineering (NSE) and related areas have seen rapid growth in recent years. The speed and scope of development in the field have made it essential for researchers to be informed on the progress across different laboratories, companies, industries and countries. In this project, we experimented with several analysis and visualization techniques on NSE-related United States patent documents to support various knowledge tasks. This paper presents results on the basic analysis of nanotechnology patents between 1976 and 2002, content map analysis and citation network analysis. The data have been obtained on individual countries, institutions and technology fields. The top 10 countries with the largest number of nanotechnology patents are the United States, Japan, France, the United Kingdom, Taiwan, Korea, the Netherlands, Switzerland, Italy and Australia. The fastest growth in the last 5 years has been in chemical and pharmaceutical fields, followed by semiconductor devices. The results demonstrate potential of information-based discovery and visualization technologies to capture knowledge regarding nanotechnology performance, transfer of knowledge and trends of development through analyzing the patent documents.

  7. Contribution of Nuclear Training Centre in Ljubljana to Training and Information in the Area of Nuclear Technology

    International Nuclear Information System (INIS)

    Stritar, A.

    1998-01-01

    Nuclear Training Centre in Ljubljana ia a part of the Jozef Stefan Institute. The paper presents its main activities, which consist of training for NPP Krsko staff, training in the area of radiation protection, organization of international training courses and public information. NPP Krsko personnel obtains initial technical training at our training centre. We are also offering training courses and licensing for people working with radioactive substances in medicine, industry and science. We are internationally recognized training centre for organization of regional and interregional courses and meeting. Our fourth activity is public information. We are visited by around 7000 students per year and answer to every question about nuclear energy. (author)

  8. CCS-MIP: Low cost Customizable Control Centre

    Science.gov (United States)

    Labezin, Christian; Vielcanet, Pierre

    1994-01-01

    The positioning and station keeping of French national satellites are among the main missions of CNES French Space Agency CNES. The related experience and skills of the Toulouse Space Centre are reknown and often required at international level for a wide range of missions. CISI, a software engineering company, has been contributing during the last 20 years to the development of the French space programs, particularly in the field of space missions ground control segments. The CCS-MIP system, presented here, is a satellite positioning and station-keeping system designed to answer the CNES multi-mission needs, easily adaptable for a wide range of applications.

  9. The GNSS data processing component within the Indonesian tsunami early warning centre provided by GITEWS

    Science.gov (United States)

    Bartsch, M.; Merx, A.; Falck, C.; Ramatschi, M.

    2010-05-01

    movements which can occur, e.g., due to strong earthquakes. The ground motion information is a valuable source for a fast understanding of an earthquake's mechanism and consequences with possible relevance for a potentially following tsunami. Regarding kinematic coordinates of a buoy only the vertical component is of interest as it corresponds to the instant sea level. The kinematic coordinates are delivered to an oceanographic post-processing unit which applies dipping-, tilting- and tidal-corrections to the data. Deviations to the mean sea level are an indicator for a possibly passing tsunami wave. By this means the GNSS system supports the decision finding process whether a tsunami has been released or not. A graphical user interface (GUI) was developed which monitors the whole processing chain from data transmission and GNSS data processing to the displaying of the kinematic coordinate time series. It supports both, a quick view for all staff members at the warning centre (24h/7d shifts) and deeper analysis by GNSS experts. The GNSS GUI system is web-based and allows all views to be displayed on different screens at the same time, even at remote locations. This is part of the concept, as it can support the dialogue between warning centre staff on duty or on standby and sensor station maintenance staff. Acknowledgements The GITEWS project (German Indonesian Tsunami Early Warning System) is carried out by a large group of scientists and engineers from (GFZ) German Research Centre for Geosciences and its partners from the German Aerospace Centre (DLR), the Alfred Wegener Institute for Polar and Marine Research (AWI), the GKSS Research Centre, the Konsortium Deutsche Meeresforschung (KDM), the Leibniz Institute for Marine Sciences (IFM-GEOMAR), the United Nations University (UNU), the Federal Institute for Geosciences and Natural Resources (BGR), the German Agency for Technical Cooperation (GTZ) and other international partners. Most relevant partners in Indonesia with

  10. Mechanical Engineering at RWTH Aachen University: Professional Curriculum Development and Teacher Training

    Science.gov (United States)

    Henning, Klaus; Bornefeld, Gero; Brall, Stefan

    2007-01-01

    This paper offers a multi-perspective view on engineering education at RWTH Aachen University: curriculum design, examples of newly developed teaching methods for engineering curricula, and teaching competencies and teacher qualification. It is based on the theories of student-centred learning, project learning, social skills, etc., but the paper…

  11. Institute of Nuclear physics of Lyon - IPNL, Activity Report 2010-2011

    International Nuclear Information System (INIS)

    2012-01-01

    The Institute of Nuclear physics of Lyon (IPNL) is under the joint supervision of the Claude Bernard University of Lyon (UCBL) and the National Institute of Nuclear and particle physics (IN2P3) of the CNRS (National Centre for Scientific Research). The laboratory studies the properties and interactions of sub-atomic particles. Its activities are largely experimental, with groups involved in a wide range of national and international collaborations concerning particle and astro-particle physics, nuclear matter and the interactions of ions and cluster with matter. In addition, the Institute has important interdisciplinary and applied research activities related to: detectors R and D, confinement of radioactive waste, bio-medical imaging, measurement of environmental levels of radioactive elements. This document presents the activity of the Centre during the 2010-2011 years: 1 - Forewords; 2 - Research activities: Quarks and Leptons, Astro-particles, Hadronic and nuclear matter, Theoretical physics, trans-disciplinary activities, publications, communications, partnerships; 3 - Teaching and research training; 4 - Technical services: electronics, Computers, Mechanics, Instrumentation, Accelerators, LABRADOR metrology service; 5 - Laboratory administration; 6 - Communication and scientific mediation (seminars, conferences, exhibitions..)

  12. Institute of Nuclear physics of Lyon - IPNL, Activity Report 2008-2009

    International Nuclear Information System (INIS)

    2010-01-01

    The Institute of Nuclear physics of Lyon (IPNL) is under the joint supervision of the Claude Bernard University of Lyon (UCBL) and the National Institute of Nuclear and particle physics (IN2P3) of the CNRS (National Centre for Scientific Research). The laboratory studies the properties and interactions of sub-atomic particles. Its activities are largely experimental, with groups involved in a wide range of national and international collaborations concerning particle and astro-particle physics, nuclear matter and the interactions of ions and cluster with matter. In addition, the Institute has important interdisciplinary and applied research activities related to: detectors R and D, confinement of radioactive waste, bio-medical imaging, measurement of environmental levels of radioactive elements. This document presents the activity of the Centre during the 2008-2009 years: 1 - Forewords; 2 - Quarks and Leptons; 3 - Astro-particles; 4 - Hadronic and nuclear matter; 5 - Theoretical physics; 6 - Radiation sciences; 7 - Technical support to experiments (electronics, Computers, Mechanics, Instrumentation, Accelerators, LABRADOR metrology service); 8 - Laboratory administration; 9 - Scientific life (publications, seminars, conferences, exhibitions, PhDs..)

  13. Institute of Nuclear physics of Lyon - IPNL, Activity Report 1992-1993

    International Nuclear Information System (INIS)

    1994-01-01

    The Institute of Nuclear physics of Lyon (IPNL) is under the joint supervision of the Claude Bernard University of Lyon (UCBL) and the National Institute of Nuclear and particle physics (IN2P3) of the CNRS (National Centre for Scientific Research). The laboratory studies the properties and interactions of sub-atomic particles. Its activities are largely experimental, with groups involved in a wide range of national and international collaborations concerning particle and astro-particle physics, nuclear matter and the interactions of ions and cluster with matter. In addition, the Institute has important interdisciplinary and applied research activities related to: detectors R and D, confinement of radioactive waste, bio-medical imaging, measurement of environmental levels of radioactive elements. This document presents the activity of the Centre during the 1992-1993 years: 1 - Quarks and Leptons; 2 - Hadronic matter; 3 - Hadrons and Astro-particles; 4 - Theoretical physics; 5 - Ions/clusters-matter; 6 - Surface treatment/characterization; 7 - R and D, Instrumentation; 8 - Technical services (Accelerators, Computers, electronics, Mechanics); 9 - Training, communication; 10 - PhDs, publications, conferences, reports; 11 - Conference papers, lectures, seminars

  14. The School for Nuclear Engineering is 25 years old: Where teachers go to school

    International Nuclear Information System (INIS)

    Knapp, W.

    1986-01-01

    For a quarter of a century the School for Nuclear Engineering at the Karlsruhe Nuclear Research Centre has provided further education in all areas of nuclear engineering. The courses are attended by all kinds of people: school teachers, shift managers in nuclear power stations and engineers from the Third World, for example. (orig.) [de

  15. Department of Biotechnology | Women in Science | Initiatives ...

    Indian Academy of Sciences (India)

    ... Proceedings – Mathematical Sciences · Resonance – Journal of Science ... Year: 2012 Innovative Young Biotechnologist Award ... Indian Institute of Science Education and Research, Mohali ... International Centre for Genetic Engineering and Biotechnology, New Delhi ... Institute of Microbial Technology, Chandigarh

  16. Sustaining Global Pressures: Women in Science and Engineering

    Indian Academy of Sciences (India)

    Women in Science and Engineering. (SGPW 2008). Next Generation. Challenges and Opportunities. January 3 - 5, 2008. Venue. SRI Convention Centre,. Anupuram, Kalpakkam,. Tamil Nadu, India www.iwsakalpakkam.com. Organised by. Indian Women Scientists' Association (IWSA). Kalpakkam Branch. IWSA. IN DA.

  17. Refresher Course on Tensors and their Applications in Engineering ...

    Indian Academy of Sciences (India)

    Applications in Engineering Sciences. Department of Mechanical Engineering, Indian Institute of Science, Bangalore. December 11-23,2006 sponsored by Indian Academy of Sciences, Bangalore in collaboration with Indian Institute of Science, Bangalore. Applications are invited from University/College teachers, Research ...

  18. Mathematical methods in engineering

    CERN Document Server

    Machado, José

    2014-01-01

    This book presents a careful selection of the contributions presented at the Mathematical Methods in Engineering (MME10) International Symposium, held at the Polytechnic Institute of Coimbra- Engineering Institute of Coimbra (IPC/ISEC), Portugal, October 21-24, 2010. The volume discusses recent developments about theoretical and applied mathematics toward the solution of engineering problems, thus covering a wide range of topics, such as:  Automatic Control, Autonomous Systems, Computer Science, Dynamical Systems and Control,  Electronics, Finance and Economics, Fluid Mechanics and Heat Transfer, Fractional Mathematics, Fractional Transforms and Their Applications,  Fuzzy Sets and Systems, Image and Signal Analysis, Image Processing, Mechanics, Mechatronics, Motor Control and Human Movement Analysis, Nonlinear Dynamics, Partial Differential Equations, Robotics, Acoustics, Vibration and Control, and Wavelets.

  19. COMPUTER GRAPHICS IN ENGINEERING GRAPHICS DEPARTMENT OF MOSCOW AVIATION INSTITUTE EDUCATIONAL PROCESS

    OpenAIRE

    Ludmila P. Bobrik; Leonid V. Markin

    2013-01-01

    Current state of technical universities students’ engineering grounding and “Engineering graphics” course place in MAI are analyzed in this paper. Also bachelor degree problems and experience of creation of issuing specialty based on «Engineering graphics» department are considered. 

  20. Meyerhoff Scholars Program: a strengths-based, institution-wide approach to increasing diversity in science, technology, engineering, and mathematics.

    Science.gov (United States)

    Maton, Kenneth I; Pollard, Shauna A; McDougall Weise, Tatiana V; Hrabowski, Freeman A

    2012-01-01

    The Meyerhoff Scholars Program at the University of Maryland, Baltimore County is widely viewed as a national model of a program that enhances the number of underrepresented minority students who pursue science, technology, engineering, and mathematics PhDs. The current article provides an overview of the program and the institution-wide change process that led to its development, as well as a summary of key outcome and process evaluation research findings. African American Meyerhoff students are 5× more likely than comparison students to pursue a science, technology, engineering, and mathematics PhD. Program components viewed by the students as most beneficial include financial scholarship, being a part of the Meyerhoff Program community, the Summer Bridge program, study groups, and summer research. Qualitative findings from interviews and focus groups demonstrate the importance of the Meyerhoff Program in creating a sense of belonging and a shared identity, encouraging professional development, and emphasizing the importance of academic skills. Among Meyerhoff students, several precollege and college factors have emerged as predictors of successful entrance into a PhD program in the science, technology, engineering, and mathematics fields, including precollege research excitement, precollege intrinsic math/science motivation, number of summer research experiences during college, and college grade point average. Limitations of the research to date are noted, and directions for future research are proposed. © 2012 Mount Sinai School of Medicine.

  1. 18 January 2011 - The British Royal Academy of Engineering in the LHC tunnel with CMS Collaboration Spokesperson G. Tonelli and Beams Department Head P. Collier; in the CERN Control Centre with P. Collier and LHC superconducting magnet test hall with Technology Department Head F. Bordry.

    CERN Multimedia

    Jean-Claude Gadmer

    2011-01-01

    18 January 2011 - The British Royal Academy of Engineering in the LHC tunnel with CMS Collaboration Spokesperson G. Tonelli and Beams Department Head P. Collier; in the CERN Control Centre with P. Collier and LHC superconducting magnet test hall with Technology Department Head F. Bordry.

  2. 75th Annual Meeting | Annual Meetings | Events | Indian Academy of ...

    Indian Academy of Sciences (India)

    Journals · Overview · Bulletin of Materials Science · DIALOGUE: Science, Scientists, and ... C. N. R. RAO, Jawaharlal Nehru Centre for Advanced Scientific Research, Bengaluru .... JAYA S. TYAGI, All-India Institute of Medical Sciences, New Delhi ... CHETAN E. CHITNIS, International Centre for Genetic Engineering and ...

  3. COMPUTER GRAPHICS IN ENGINEERING GRAPHICS DEPARTMENT OF MOSCOW AVIATION INSTITUTE EDUCATIONAL PROCESS

    Directory of Open Access Journals (Sweden)

    Ludmila P. Bobrik

    2013-01-01

    Full Text Available Current state of technical universities students’ engineering grounding and “Engineering graphics” course place in MAI are analyzed in this paper. Also bachelor degree problems and experience of creation of issuing specialty based on «Engineering graphics» department are considered. 

  4. Probing Sagittarius A* and its environment at the Galactic centre: VLT and APEX working in synergy

    Czech Academy of Sciences Publication Activity Database

    Eckart, A.; Schödel, R.; García-Marín, M.; Witzel, G.; Weiss, A.; Baganoff, F. K.; Morris, M.; Bertram, T.; Dovčiak, Michal; Downes, D.; Duschl, W.J.; Karas, Vladimír; Koenig, S.; Krichbaum, T.P.; Krips, M.; Kunneriath, D.; Lu, R.-S.; Markoff, S. B.; Mauerhan, J.; Meyer, L.; Moultaka, J.; Muzic, K.; Najarro, F.; Pott, J.-U.; Schuster, K.; Sjouwerman, L.; Straubmeier, C.; Thum, C.; Vogel, S.; Wiesemeyer, H.; Zamaninasab, M.; Zensus, A.

    2008-01-01

    Roč. 133, - (2008), s. 26-30 ISSN 0722-6691 R&D Projects: GA MŠk(CZ) LC06014 Institutional research plan: CEZ:AV0Z10030501 Keywords : astrophsysics * galactic centre Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics

  5. Sadhana | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Sequential Bayesian technique: An alternative approach for software reliability estimation ... Software reliability; Bayesian sequential estimation; Kalman filter. ... Department of Mathematics, Indian Institute of Technology, Kharagpur 721 302; Reliability Engineering Centre, Indian Institute of Technology, Kharagpur 721 302 ...

  6. Radioactive waste management at the Peruvian Nuclear Energy Institute

    International Nuclear Information System (INIS)

    Mallaupoma, M.

    1986-01-01

    A brief account of current radioactive liquid waste management practices at the Peruvian Nuclear Energy Institute (IPEN), is presented. The storage and disposal systems and facilities to be provided at the future Peruvian Nuclear Research Centre (CNIP) at Huarangal, 40 km to the North of Lima, are described. (Author) [pt

  7. Rapport annuel au Parlement Loi sur l'accès à l'information Centre ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    leonardi

    accès à l'information. Source. Nombre de demandes. 0. Médias. 1. Rapport statistique sur la Loi sur l'accès à l'information. Nom de l'institution : Centre de recherches pour le développement international. Période visée par le ...

  8. Pacific centre of the Arctic Oscillation: product of high local variability rather than teleconnectivity

    Czech Academy of Sciences Publication Activity Database

    Huth, Radan

    58A, č. 5 (2006), s. 601-604 ISSN 0280-6495 R&D Projects: GA ČR GA205/05/2282 Institutional research plan: CEZ:AV0Z30420517 Keywords : Arctic Oscillation * Pacific centre * principal component analysis Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 2.245, year: 2006

  9. Engineering spin-wave channels in submicrometer magnonic waveguides

    Directory of Open Access Journals (Sweden)

    XiangJun Xing

    2013-03-01

    Full Text Available Based on micromagnetic simulations and model calculations, we demonstrate that degenerate well and barrier magnon modes can exist concurrently in a single magnetic waveguide magnetized perpendicularly to the long axis in a broad frequency band, corresponding to copropagating edge and centre spin waves, respectively. The dispersion relations of these magnon modes clearly show that the edge and centre modes possess much different wave characteristics. By tailoring the antenna size, the edge mode can be selectively activated. If the antenna is sufficiently narrow, both the edge and centre modes are excited with considerable efficiency and propagate along the waveguide. By roughening the lateral boundary of the waveguide, the characteristics of the relevant channel can be easily engineered. Moreover, the coupling of the edge and centre modes can be conveniently controlled by scaling the width of the waveguide. For a wide waveguide with a narrow antenna, the edge and centre modes travel relatively independently in spatially-separate channels, whereas for a narrow strip, these modes strongly superpose in space. These discoveries might find potential applications in emerging magnonic devices.

  10. Male and Female Summer Interns in Engineering from 2007-2012

    Science.gov (United States)

    Hall, Cathy W.; Brush, Kimberly M.; Pinelli, Thomas E.

    2013-01-01

    The purpose of this study was to ascertain the colleges and universities from which engineering interns were chosen for the Langley Aerospace Research Student Scholars (LARSS) internship program over a six year period. While the initial question was where the interns were from, information was also obtained on these colleges and universities' rankings with respect to female faculty in tenure/tenure-track positions as well as research expenditures according to the American Society for Engineering Education's (ASEE) 2012 Annual Report. The majority of interns were selected from 14 institutions. Eight of the institutions for female interns and 7 for male interns were also cited as having the largest percentages/numbers of female faculty according to ASEE data. In 10 of the 14 institutions for male interns and 9 of 14 for female interns, the institutions were cited as having some of the highest research expenditures. Last, data from ASEE's report on bachelor degrees awarded in 2011 was assessed with respect to the 21 institutions listed as having higher numbers of women in tenure/tenure-track positions. The majority of these institutions represented larger engineering programs with a sizeable number of engineering faculty. These 21institutions accounted for 24.4% of the total engineering bachelor degrees awarded in 2011, with 27.4% of all female and 23.8% of all male graduates in the U.S.

  11. Comparative Education Research Framed by Neo-Institutional Theory: A Review of Diverse Approaches and Conflicting Assumptions

    Science.gov (United States)

    Wiseman, Alexander W.; Astiz, M. Fernanda; Baker, David P.

    2014-01-01

    The rise in globalisation studies in comparative education places neo-institutional theory at the centre of many debates among comparative education researchers. However, uncertainty about how to interpret neo-institutional theory still persists among educational comparativists. With this uncertainty comes misinterpretation of its principles,…

  12. The role of information centres in communication strategy on nuclear matters: evolution and outlook

    International Nuclear Information System (INIS)

    Diaz Rio, E.

    1993-01-01

    The accident at the Three Miles Island Power Plant showed that nuclear energy was not as safe as it had been reported to be; there were errors which could cause serious accidents, and the public at large reacted harshly over this fact, which was aggravated by a lack of clear, simple, easy-to-understand information, because all the news that was transmitted was made using technical jargon which was difficult to understand and in haughty tones which were not readily accepted. The Information Centre is the shop window which the nuclear power plant has at its service, as a means for displaying what energy is. The information centres must be a centre of communication, of commercial, social and cultural initiatives. They can be a backup to information, instruction, or training conferences, with: university, schools, institutes, teachers, the world of journalism

  13. Institute Born of Gratitude.

    Science.gov (United States)

    McLellan, Vin

    1980-01-01

    The Wang Institute of Graduate Studies plans to offer a master's degree in software engineering. The development of an academic program to produce superior, technically qualified managers for the computer industry's software production is discussed. (Journal availability: Datamation, 666 Fifth Ave., New York, NY 10103.) (MLW)

  14. RTEMS Centre - Support and Maintenance Centre to RTEMS Operating System

    Science.gov (United States)

    Silva, H.; Constantino, A.; Freitas, D.; Coutinho, M.; Faustino, S.; Mota, M.; Colaço, P.; Sousa, J.; Dias, L.; Damjanovic, B.; Zulianello, M.; Rufino, J.

    2009-05-01

    RTEMS CENTRE - Support and Maintenance Centre to RTEMS Operating System is a joint ESA/Portuguese Task Force initiative to develop a support and maintenance centre to the Real-Time Executive for Multiprocessor Systems (RTEMS). This paper gives a high level visibility of the progress, the results obtained and the future work in the RTEMS CENTRE [6] and in the RTEMS Improvement [7] projects. RTEMS CENTRE started officially in November 2006, with the RTEMS 4.6.99.2 version. A full analysis of RTEMS operating system was produced. The architecture was analysed in terms of conceptual, organizational and operational concepts. The original objectives [1] of the centre were primarily to create and maintain technical expertise and competences in this RTOS, to develop a website to provide the European Space Community an entry point for obtaining support (http://rtemscentre.edisoft.pt), to design, develop, maintain and integrate some RTEMS support tools (Timeline Tool, Configuration and Management Tools), to maintain flight libraries and Board Support Packages, to develop a strong relationship with the World RTEMS Community and finally to produce some considerations in ARINC-653, DO-178B and ECSS E-40 standards. RTEMS Improvement is the continuation of the RTEMS CENTRE. Currently the RTEMS, version 4.8.0, is being facilitated for a future qualification. In this work, the validation material is being produced following the Galileo Software Standards Development Assurance Level B [5]. RTEMS is being completely tested, errors analysed, dead and deactivated code removed and tests produced to achieve 100% statement and decision coverage of source code [2]. The SW to exploit the LEON Memory Management Unit (MMU) hardware will be also added. A brief description of the expected implementations will be given.

  15. Observing Literacy Practices in Neighbor Institutions

    DEFF Research Database (Denmark)

    Reusch, Charlotte

    ’procedures on language and literacy. Based on this material, we developed an observation scheme and a guide for preschool teachers to follow, inspired by an action learning concept.During fall 2015, a pilot project is carried out. Preschool teachers from one institution visit a neighbor institution one by one during...... work hours, in order to observe and register how language and literacy events look like there. Afterwards, they share their registrations at a team meeting, and discuss and decide which procedures to test in their own institution. Thus, they form a professional learning network. In the pilot project......The Danish National Centre for Reading and a municipality in southern Denmark cooperate to develop a program to improve preschool children’s early literacy skills. The project aims to support preschool teachers’ ability to create a rich literacy environment for children age 3‒6. Recent research...

  16. Mid Year Meetings

    Indian Academy of Sciences (India)

    Venues: Bengaluru University and Indian Institute of Science, Bengaluru ... The silkworm, Bombyx mori - a treasure-trove for genetical research, View presentation ... Ranganathan, International Centre for Genetic Engineering and Biotechnology, New Delhi ... Indira Nath, All India Institute of Medical Sciences, New Delhi

  17. FINANCING INSTRUMENTS USED IN THE CENTRE DEVELOPMENT REGION

    Directory of Open Access Journals (Sweden)

    Hada Teodor

    2011-12-01

    Full Text Available The paper presents the main financing instruments (projects used in the Centre Region, approaching aspects regarding the Centre Development Region, such as its features in terms of the geographical profile of employment. In regard to the involvement of the population to the economic life, statistics show relatively low values of the overall activity and employment rates recorded primarily in the rural area. If we consider only the population included in the age group 15 to 64, the active population represent 62.2% of total, and the employment rate is 56.3% of the total active population, both declining in the last 15-20 years. At regional level, in order to implement the regional development policy in accordance with Law no. 315/2004 on regional development in Romania, two institutions are functioning: Regional Development Board and Centru Regional Development Agency. The paper also presents the use dynamics of funds in the Centre Region. Starting with 2007, Centru Regional Development Agency has become an intermediary body within ROP 2007-2013 with the role of promoting and managing the funds allocated to this region. In regard to the stage of implementation of ROP in the Centre Region, starting with February 25th, 2011, all 12 key areas of intervention of the programme were launched and a number of 1.053 projects were submitted in the Centre Region for a total amount of 1.033,99 million euro, the paper showing a diagram of the submitted projects. There is also a diagram of the amounts requested for funding the projects submitted until February 25th, 2011 at the Centru RDA and the available financing budgets on priority axes. Until February 25th, 2011, a number of 174 projects were contracted under ROP for a total value of 1.549.430.419,97 lei. In the end, we review the main indicators of the contracted projects. They belong to rural development, transport infrastructure, social infrastructure, regional and local business environment, tourism

  18. Education of biomedical engineering in Taiwan.

    Science.gov (United States)

    Lin, Kang-Ping; Kao, Tsair; Wang, Jia-Jung; Chen, Mei-Jung; Su, Fong-Chin

    2014-01-01

    Biomedical Engineers (BME) play an important role in medical and healthcare society. Well educational programs are important to support the healthcare systems including hospitals, long term care organizations, manufacture industries of medical devices/instrumentations/systems, and sales/services companies of medical devices/instrumentations/system. In past 30 more years, biomedical engineering society has accumulated thousands people hold a biomedical engineering degree, and work as a biomedical engineer in Taiwan. Most of BME students can be trained in biomedical engineering departments with at least one of specialties in bioelectronics, bio-information, biomaterials or biomechanics. Students are required to have internship trainings in related institutions out of campus for 320 hours before graduating. Almost all the biomedical engineering departments are certified by IEET (Institute of Engineering Education Taiwan), and met the IEET requirement in which required mathematics and fundamental engineering courses. For BMEs after graduation, Taiwanese Society of Biomedical Engineering (TSBME) provides many continue-learning programs and certificates for all members who expect to hold the certification as a professional credit in his working place. In current status, many engineering departments in university are continuously asked to provide joint programs with BME department to train much better quality students. BME is one of growing fields in Taiwan.

  19. Function of Train Traction Department and Railway Vehicles in Logistic Centres

    Directory of Open Access Journals (Sweden)

    Velimir Kolar

    2007-05-01

    Full Text Available The increasing globalization has spread the production locationsto every part of the world thus increasing even more therole of transport in determining the price and quality of a product.Therefore, the producers and carriers join together moreand more frequently through the supply chains. Railway carriershave a very significant role in supply chains, both throughorganization of transport and forming the trains as final products,and through forming the logistic centres. Logistic centresare the starting and the final railway stations but also the meetingpoints of the national carrier with other carriers (sea, road,river as well as other railway carriers and they also represent informationcentres. For the quality of service at logistic centres, itis important to have well organized operation of train traction.In order to keep up the regulmity of trains and the quality oftransport at logistic centres, among other things, it is necessaryto provide an optimal number of locomotives and to providethe technical inspection place. Special attention should be paidto the organization of work peiformed by the engine staff At logisticcentres it is possible to organize high-quality technical inspectionof wagons thus increasing the traffic safety.

  20. Nuclear Research Institute Rez: Its past and present and future challenges

    International Nuclear Information System (INIS)

    Pazdera, F.

    2001-01-01

    The paper gives an overview of the history of the Nuclear Research Institute Rez development over forty years of its existence. Its present activities are discussed in some detail. These historical and present activities represent the basis for discussing: challenges faced by the NRI; interactions of NRI with their environment; collaboration and co-operation. Nuclear research centres would continue to be the main source of expertise for power plant operation, radiation and isotope applications, regulatory practices and waste management. Future developments should ensure viability of these centres. (author)

  1. Annual conference on engineering and the physical sciences in medicine

    International Nuclear Information System (INIS)

    Le Heron, J.

    1999-01-01

    The venue for the 1998 annual conference on Engineering and the Physical Sciences in Medicine was the Wrest Point Casino Convention Centre, Hobart, from 15 to 19 November. Jointly sponsored by the Australasian College of Physical Scientists and Engineers in Medicine, the College of Biomedical Engineers and the Society of Medical and Biomedical Engineering, this meeting is a major forum for professionals working in these areas in Australasia. The theme for the conference was Relevance beyond rationalism - charting a course for the future. This reviewer will consider only those presentations concerned with the use of radiation in medicine. (author)

  2. Prospects of 3D mapping of the Galactic Centre clouds with X-ray polarimetry

    Czech Academy of Sciences Publication Activity Database

    Marin, Frederic; Karas, Vladimír; Kunneriath, Devaky; Muleri, F.

    2014-01-01

    Roč. 441, č. 4 (2014), s. 3170-3176 ISSN 0035-8711 R&D Projects: GA ČR(CZ) GC13-00070J; GA MŠk LD12010 Institutional support: RVO:67985815 Keywords : polarization * radiative transfer * galaxy: centre Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 5.107, year: 2014

  3. Radiological and Medical Sciences Research Institute (RAMSRI) - Annual Report 2015

    International Nuclear Information System (INIS)

    2015-01-01

    The Radiological and Medical Sciences Research Institute (RAMSRI) is the fourth Research and Development Institute of the Ghana Atomic Energy Commission (GAEC), undertaking research in human health and nutrition. This annual report covers the major activities undertaken by RAMSRI for the year 2015. The activities are grouped under the following headings: Establishment; Personnel and Organisation; Major Activities of Centres; Ongoing IAEA TC Projects; Human Resource Development; IAEA Coordinated Meetings Hosted; Publications; Achievements; Challenges; Projections for the Year 2016; and Recommendations.

  4. Virginia power nuclear power station engineer training program

    International Nuclear Information System (INIS)

    Williams, T.M.; Haberstroh-Timpano, S.

    1987-01-01

    In response to the Institute of Nuclear Power Operations (INPO) accreditation requirements for technical staff and manager, Virginia Power developed the Nuclear Power Station Engineer Training Programs (NPSETP). The NPSETP is directed toward enhancing the specific knowledge and skills of company engineers, especially newly hired engineers. The specific goals of the program are to promote safe and reliable plant operation by providing engineers and appropriate engineering technicians with (1) station-specific basic skills; (2) station-specific specialized skills in the areas of surveillance and test, plant engineering, nuclear safety, and in-service inspection. The training is designed to develop, maintain, and document through demonstration the required knowledge and skills of the engineers in the identified groups at North Anna and Surry Power Stations. The program responds to American National Standards Institute, INPO, and US Nuclear Regulatory Commission standards

  5. Pesticide Exposure According To The Czech Toxicological Information Centre From 1997 To 2005

    Czech Academy of Sciences Publication Activity Database

    Rakovcová, H.; Pelclová, D.; Říčařová, B.; Navrátil, Tomáš

    2007-01-01

    Roč. 101, č. 14 (2007), s. 258-259 ISSN 0009-2770. [Mezioborová česko-slovenská toxikologická konference /12./. Praha, 11.06.2007-13.06.2007] Institutional research plan: CEZ:AV0Z40400503 Keywords : pesticide s * Czech Toxicological Information Centre * rodenticides Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 0.683, year: 2007

  6. Engine gearbox fault diagnosis using empirical mode ...

    Indian Academy of Sciences (India)

    Kiran Vernekar

    Department of Mechanical Engineering, National Institute of Technology Karnataka,. Surathkal ... proposed approach is an effective method for engine fault diagnosis. Keywords. Engine fault ... (DAQ) card and analysed using LabVIEW software from. Figure 1. .... and reduce numerical difficulties during the calculation. T.

  7. International Conference for Innovation in Biomedical Engineering and Life Sciences

    CERN Document Server

    Usman, Juliana; Mohktar, Mas; Ahmad, Mohd

    2016-01-01

    This volumes presents the proceedings of ICIBEL 2015, organized by the Centre for Innovation in Medical Engineering (CIME) under Innovative Technology Research Cluster, University of Malaya. It was held in Kuala Lumpur, Malaysia, from 6-8 December 2015. The ICIBEL 2015 conference promotes the latest researches and developments related to the integration of the Engineering technology in medical fields and life sciences. This includes the latest innovations, research trends and concerns, challenges and adopted solution in the field of medical engineering and life sciences. .

  8. Birth centre confinement at the Queen Victoria Medical Centre. I. Obstetric and neonatal outcome.

    Science.gov (United States)

    Campbell, J; Hudson, H; Lumley, J; Morris, N; Rao, J; Spensley, J

    1981-10-03

    A review of hte first 175 confinements at the Queen Victoria Medical Centre Birth Centre is presented. The design, structure and function of hte Birth Centre is described and the safety of the programme demonstrated. Seventy-four pregnancies (42%) accepted for Birth Centre confinement required transfer because of antepartum or intrapartum complications. There were satisfactory obstetric and neonatal outcomes in all pregnancies. The first year's experience has allowed a reassessment of the risk factors, which will permit greater use of the Birth Centre without any increases risk to mothers or babies.

  9. The Search for Centre

    Science.gov (United States)

    Nunes, April

    2006-01-01

    This paper acknowledges the importance of a dancer's centre but likewise highlights the problematic nature of the communication of this concept from dance teacher to student. After a brief introduction of orthodox approaches in finding centre, this paper suggests a method of locating centre through the ancient somatic technique.

  10. Hydrologic Engineering Center

    Data.gov (United States)

    Federal Laboratory Consortium — The Hydrologic Engineering Center (HEC), an organization within the Institute for Water Resources, is the designated Center of Expertise for the U.S. Army Corps of...

  11. Radiation-engineered nanomaterials. The role of the IAEA in coordinating research

    International Nuclear Information System (INIS)

    Haji-Saeid, M.; Safrany, A.; Sampa, M.H. de O.; Ramamoorthy, N.

    2011-01-01

    Complete text of publication follows. Radiation technologies, already established in materials processing, have properties uniquely for the creation of new functional materials on the nanoscale, both in 'top-to-bottom' and 'bottom-up' approaches. For example, controlled radiation degradation may be used for fabrication of nanoporous and nanostructured surfaces and membranes; while radiation polymerization, crosslinking and grafting could produce functional polymeric, metallic and semiconductor nanoparticles, functional nanostructured surfaces and nanocomposites. Applications for such nanostructured materials are manifold, from 3D structures, templates for nanowire fabrication, supports for purification, and proton exchange membranes, to imaging, diagnostics, targeted drug and gene delivery, wound healing and cell sheet engineering. Considering the significant potential as well as the already demonstrated successful applications in using radiation methods for synthesis and characterization of nano-sized materials as well as the interdisciplinary nature of nanotechnology, and in order to facilitate the coordination between radiation-based research groups and nanotechnology centres, the IAEA has organized a number of consultancy meetings, training courses and workshops. Additionally, a coordinated research project entitled 'Nanoscale Radiation Engineering of Advanced Materials for Potential Biomedical applications' in progress, under which 17 IAEA Member States institutions work together to develop radiolytic methodologies for synthesis of nanoparticles and nanoporous membranes; polymeric, inorganic and hybrid nanocarriers for various healthcare applications. This presentation will describe the present activities of the IAEA and plans for future supports for fostering development and application of radiation-engineered functional nanomaterials.

  12. The Brazilian research and teaching center in biomedicine and aerospace biomedical engineering.

    Science.gov (United States)

    Russomano, T; Falcao, P F; Dalmarco, G; Martinelli, L; Cardoso, R; Santos, M A; Sparenberg, A

    2008-08-01

    The recent engagement of Brazil in the construction and utilization of the International Space Station has motivated several Brazilian research institutions and universities to establish study centers related to Space Sciences. The Pontificia Universidade Catolica do Rio Grande do Sul (PUCRS) is no exception. The University initiated in 1993 the first degree course training students to operate commercial aircraft in South America (the School of Aeronautical Sciences. A further step was the decision to build the first Brazilian laboratory dedicated to the conduct of experiments in ground-based microgravity simulation. Established in 1998, the Microgravity Laboratory, which was located in the Instituto de Pesquisas Cientificas e Tecnologicas (IPCT), was supported by the Schools of Medicine, Aeronautical Sciences and Electrical Engineering/Biomedical Engineering. At the end of 2006, the Microgravity Laboratory became a Center and was transferred to the School of Engineering. The principal activities of the Microgravity Centre are the development of research projects related to human physiology before, during and after ground-based microgravity simulation and parabolic flights, to aviation medicine in the 21st century and to aerospace biomedical engineering. The history of Brazilian, and why not say worldwide, space science should unquestionably go through PUCRS. As time passes, the pioneering spirit of our University in the aerospace area has become undeniable. This is due to the group of professionals, students, technicians and staff in general that have once worked or are still working in the Center of Microgravity, a group of faculty and students that excel in their undeniable technical-scientific qualifications.

  13. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Author Affiliations. Purnendu Parhi1 Satya Sadhan Singh2 Alok R Ray1 A Ramanan2. Centre for Biomedical Engineering, Indian Institute of Technology, New Delhi 110 016, India; Department of Chemistry, Indian Institute of Technology, New Delhi 110 016, India ...

  14. Conceptual planning and designing of a greywater recycling system for a nursery house and a daycare centre in Karagwe, Tanzania

    OpenAIRE

    Shrestha, Sudina

    2017-01-01

    Engineers without Borders (EWB) Finland started a project to plan, conceptualize and design a nursery centre and a daycare centre in Kayanga, Tanzania. During the planning phase, EWB Finland was informed about inconsistent water supply in the area of the site.Hence, this thesis was designed to overcome the insufficiency of water in the site location. The presumed value of water consumption for the site indicated a large percentage of greywater generation that are usually drained down the ...

  15. A knowledge translation project on community-centred approaches in public health.

    Science.gov (United States)

    Stansfield, J; South, J

    2018-03-01

    This article examines the development and impact of a national knowledge translation project aimed at improving access to evidence and learning on community-centred approaches for health and wellbeing. Structural changes in the English health system meant that knowledge on community engagement was becoming lost and a fragmented evidence base was seen to impact negatively on policy and practice. A partnership started between Public Health England, NHS England and Leeds Beckett University in 2014 to address these issues. Following a literature review and stakeholder consultation, evidence was published in a national guide to community-centred approaches. This was followed by a programme of work to translate the evidence into national strategy and local practice.The article outlines the key features of the knowledge translation framework developed. Results include positive impacts on local practice and national policy, for example adoption within National Institute for Health and Care Evidence (NICE) guidance and Local Authority public health plans and utilization as a tool for local audit of practice and commissioning. The framework was successful in its non-linear approach to knowledge translation across a range of inter-connected activity, built on national leadership, knowledge brokerage, coalition building and a strong collaboration between research institute and government agency.

  16. Factsheets for the (eco)toxicological risk assessment strategy of the National Institute for Public Health and the Environment, Part VI

    NARCIS (Netherlands)

    Janssen PJCM; Burg W ter; Pelgrom SMGJ; Fleuren R; SIR; SEC

    2007-01-01

    This report contains four factsheets describing risk assessment methods used at the Centre for Substances and Integral Risk Assessment (SIR) and the Expert Centre for Substances (SEC) of the National Institute for Public Health and the Environment (RIVM). The first three factsheets concern human

  17. Institute of Nuclear physics of Lyon - IPNL, Activity Report 2002-2003

    International Nuclear Information System (INIS)

    2004-01-01

    The Institute of Nuclear physics of Lyon (IPNL) is under the joint supervision of the Claude Bernard University of Lyon (UCBL) and the National Institute of Nuclear and particle physics (IN2P3) of the CNRS (National Centre for Scientific Research). The laboratory studies the properties and interactions of sub-atomic particles. Its activities are largely experimental, with groups involved in a wide range of national and international collaborations concerning particle and astro-particle physics, nuclear matter and the interactions of ions and cluster with matter. In addition, the Institute has important interdisciplinary and applied research activities related to: detectors R and D, confinement of radioactive waste, bio-medical imaging, measurement of environmental levels of radioactive elements. This document presents the activity of the Centre during the 2002-2003 years: 1 - Research topics: Quarks and Leptons; Astro-particles; Hadronic matter; Nuclear matter; Theoretical physics; trans-disciplinary activities; 2 - Technical support to experiments (electronics, Computers, Mechanics, Accelerators, Instrumentation, Radiation protection, LABRADOR metrology service, Administration); 3 - Transverse activities (Training, Science and society, Communication, Documentation); 4 - Scientific life (Scientific production, participation to scientific bodies); 5 - Manpower (Permanent training, Staff)

  18. Institute of Nuclear physics of Lyon - IPNL, Activity Report 2006-2007

    International Nuclear Information System (INIS)

    2008-01-01

    The Institute of Nuclear physics of Lyon (IPNL) is under the joint supervision of the Claude Bernard University of Lyon (UCBL) and the National Institute of Nuclear and particle physics (IN2P3) of the CNRS (National Centre for Scientific Research). The laboratory studies the properties and interactions of sub-atomic particles. Its activities are largely experimental, with groups involved in a wide range of national and international collaborations concerning particle and astro-particle physics, nuclear matter and the interactions of ions and cluster with matter. In addition, the Institute has important interdisciplinary and applied research activities related to: detectors R and D, confinement of radioactive waste, bio-medical imaging, measurement of environmental levels of radioactive elements. This document presents the activity of the Centre during the 2006-2007 years: 1 - Research topics: Quarks, Leptons and FUNDAMENTAL INTERACTIONS; Astro-particles; Hadronic and nuclear matter; Theoretical physics; trans-disciplinary activities; 2 - Technical support to experiments (electronics, Computers, Mechanics, Instrumentation, Accelerators, LABRADOR metrology service); 3 - Research support (administration, documentation, partnership and valorisation, quality assurance, permanent training, open university); 4 - Scientific life (publications, seminars, conferences, exhibitions, PhDs..)

  19. Institute of Nuclear physics of Lyon - IPNL, Activity Report 2004-2005

    International Nuclear Information System (INIS)

    2006-01-01

    The Institute of Nuclear physics of Lyon (IPNL) is under the joint supervision of the Claude Bernard University of Lyon (UCBL) and the National Institute of Nuclear and particle physics (IN2P3) of the CNRS (National Centre for Scientific Research). The laboratory studies the properties and interactions of sub-atomic particles. Its activities are largely experimental, with groups involved in a wide range of national and international collaborations concerning particle and astro-particle physics, nuclear matter and the interactions of ions and cluster with matter. In addition, the Institute has important interdisciplinary and applied research activities related to: detectors R and D, confinement of radioactive waste, bio-medical imaging, measurement of environmental levels of radioactive elements. This document presents the activity of the Centre during the 2004-2005 years: 1 - Research topics: Quarks and Leptons; Astro-particles; Hadronic and nuclear matter; Theoretical physics; trans-disciplinary activities; 2 - Technical support to experiments (electronics, Computers, Mechanics, Instrumentation, Radiation protection, Accelerators, LABRADOR metrology service, Administration); 3 - Transverse activities (Training, Science and society, Communication, Documentation); 4 - Scientific life (publications, seminars, conferences, exhibitions, PhDs..); 5 - Manpower (Permanent training, Staff)

  20. Institute of Nuclear physics of Lyon - IPNL, Activity Report 2000-2001

    International Nuclear Information System (INIS)

    Chartoire, M.; Flores, S.; Hernaus, Z.; Jarroux-Declais, D.; Kibler, M.; Martin, J.P.

    2002-01-01

    The Institute of Nuclear physics of Lyon (IPNL) is under the joint supervision of the Claude Bernard University of Lyon (UCBL) and the National Institute of Nuclear and particle physics (IN2P3) of the CNRS (National Centre for Scientific Research). The laboratory studies the properties and interactions of sub-atomic particles. Its activities are largely experimental, with groups involved in a wide range of national and international collaborations concerning particle and astro-particle physics, nuclear matter and the interactions of ions and cluster with matter. In addition, the Institute has important interdisciplinary and applied research activities related to: detectors R and D, confinement of radioactive waste, bio-medical imaging, measurement of environmental levels of radioactive elements. This document presents the activity of the Centre during the 2000-2001 years: 1 - Forewords; 2 - Quarks and Leptons; 3 - Astro-particles; 4 - High-density hadronic matter; 5 - Nuclear matter; 6 - Theoretical physics; 7 - pluri-disciplinary activities; 8 - Technical services (electronics, Computers, Mechanics, Instrumentation, Accelerators, experiments support, radiation protection, health and safety, administration); 9 - Training, communication, documentation; 10 - Scientific production (publications, seminars, conferences, exhibitions, PhDs..); 11 - Staff and visitors; 12 - Organigram

  1. Institute of Nuclear physics of Lyon - IPNL, Activity Report 1996-1997

    International Nuclear Information System (INIS)

    1998-01-01

    The Institute of Nuclear physics of Lyon (IPNL) is under the joint supervision of the Claude Bernard University of Lyon (UCBL) and the National Institute of Nuclear and particle physics (IN2P3) of the CNRS (National Centre for Scientific Research). The laboratory studies the properties and interactions of sub-atomic particles. Its activities are largely experimental, with groups involved in a wide range of national and international collaborations concerning particle and astro-particle physics, nuclear matter and the interactions of ions and cluster with matter. In addition, the Institute has important interdisciplinary and applied research activities related to: detectors R and D, confinement of radioactive waste, bio-medical imaging, measurement of environmental levels of radioactive elements. This document presents the activity of the Centre during the 1996-1997 years: 1 - Forewords; 2 - Physics at LEP; 3 - Experiments preparation for the LHC; 4 - Hadronic and nuclear matter; 5 - Astro-particles; 6 - Theoretical physics; 7 - Ions/clusters-matter and physics-chemistry of ion-solids interaction; 8 - Technical services (electronics, Mechanics, Computers, Accelerators, experiments support, radiation protection, health and safety, administration, documentation); 9 - IPNL's scientific life (Training, PhDs, publications, conferences, reports, seminars, staff)

  2. 34 CFR 637.12 - What are institutional projects?

    Science.gov (United States)

    2010-07-01

    ... EDUCATION, DEPARTMENT OF EDUCATION MINORITY SCIENCE AND ENGINEERING IMPROVEMENT PROGRAM What Kinds of Projects Does the Secretary Assist Under This Program? § 637.12 What are institutional projects? (a... 34 Education 3 2010-07-01 2010-07-01 false What are institutional projects? 637.12 Section 637.12...

  3. Russian institute receives CMS Gold Award

    CERN Multimedia

    Patrice Loïez

    2003-01-01

    The Snezhinsk All-Russian Institute of Scientific Research for Technical Physics (VNIITF) of the Russian Federal Nuclear Centre (RFNC) is one of twelve CMS suppliers to receive awards for outstanding performance this year. The CMS Collaboration took the opportunity of the visit to CERN of the Director of VNIITF and his deputy to present the CMS Gold Award, which the institute has received for its exceptional performance in the assembly of steel plates for the CMS forward hadronic calorimeter. This calorimeter consists of two sets of 18 wedge-shaped modules arranged concentrically around the beam-pipe at each end of the CMS detector. Each module consists of steel absorber plates with quartz fibres inserted into them. The institute developed a special welding technique to assemble the absorber plates, enabling a high-quality detector to be produced at relatively low cost.RFNC-VNIITF Director Professor Georgy Rykovanov (right), is seen here receiving the Gold Award from Felicitas Pauss, Vice-Chairman of the CMS ...

  4. Institute of Radiochemistry. Annual report 1992

    International Nuclear Information System (INIS)

    Bernhard, G.

    1993-05-01

    The Institute for Radiochemistry of the Research Center Rossendorf Inc. (FZR) started its work on 1 January 1992. As part of the FZR the Institute of Radiochemistry (IRC) is supported by the Free State of Saxony and the Federal Republic of Germany on the basis of equal shares. Furthermore the IRC has experienced helpful support in form of additional grants. This Annual Report summerizes the research activities achieved in the first year. Some papers result from research activities done in the different divisions of radiochemistry of the former Nuclear Research Centre Rossendorf. Problems of radioecology influence the present research programme and profile of this institute. The major goal of the IRC is fundamental and applied research on the field of the transport behaviour of radiochemical pollutants in the biosphere. Owing to the fact that Saxony and Thuringia are partly contaminated from previous uranium mining activities these investigations are of actual importance. (orig./BBR)

  5. 9th Structural Engineering Convention 2014

    CERN Document Server

    2015-01-01

    The book presents research papers presented by academicians, researchers, and practicing structural engineers from India and abroad in the recently held Structural Engineering Convention (SEC) 2014 at Indian Institute of Technology Delhi during 22 – 24 December 2014. The book is divided into three volumes and encompasses multidisciplinary areas within structural engineering, such as earthquake engineering and structural dynamics, structural mechanics, finite element methods, structural vibration control, advanced cementitious and composite materials, bridge engineering, and soil-structure interaction. Advances in Structural Engineering is a useful reference material for structural engineering fraternity including undergraduate and postgraduate students, academicians, researchers and practicing engineers.

  6. The Footfall of Shopping Centres in Olomouc (Czech Republic): An Application of the Gravity Model

    Czech Academy of Sciences Publication Activity Database

    Klapka, Pavel; Erlebach, M.; Král, O.; Lehnert, M.; Mička, T.

    2013-01-01

    Roč. 21, č. 3 (2013), s. 12-26 ISSN 1210-8812 Institutional support: RVO:68145535 Keywords : footfall * spatial interaction * gravity model * shopping centre * Olomouc Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 0.341, year: 2013 http://www.geonika.cz/EN/research/ENMgr/MGR_2013_03.pdf

  7. 23rd International Conference on Industrial Engineering and Engineering Management 2016

    CERN Document Server

    Shen, Jiang; Dou, Runliang

    2017-01-01

    International Conference on Industrial Engineering and Engineering Management is sponsored by Chinese Industrial Engineering Institution, CMES, which is the unique national-level academic society of Industrial Engineering. The conference is held annually as the major event in this area. Being the largest and the most authoritative international academic conference held in China, it supplies an academic platform for the experts and the entrepreneurs in International Industrial Engineering and Management area to exchange their research results. Many experts in various fields from China and foreign countries gather together in the conference to review, exchange, summarize and promote their achievements in Industrial Engineering and Engineering Management fields. Some experts pay special attention to the current situation of the related techniques application in China as well as their future prospect, such as Industry 4.0, Green Product Design, Quality Control and Management, Supply Chain and logistics Management...

  8. Japan Atomic Energy Research Institute, Reactor Engineering Division annual report

    International Nuclear Information System (INIS)

    1979-09-01

    Research activities in the Division of Reactor Engineering in fiscal 1978 are described. Works of the Division are development of multi-purpose Very High Temperature Gas Cooled Reactor, fusion reactor engineering, and development of Liquid Metal Fast Breeder Reactor for Power Reactor and Nuclear Fuel Development Corporation. Contents of the report are nuclear data and group constants, theoretical method and code development, integral experiment and analysis, shielding, reactor and nuclear instrumentation, dynamics analysis and control method development, fusion reactor technology, and Committees on Reactor Physics and in Decommissioning of Nuclear Facilities. (author)

  9. The academic medical centre and nongovernmental organisation partnership following a natural disaster.

    Science.gov (United States)

    Sarani, Babak; Mehta, Samir; Ashburn, Michael; Nakashima, Koji; Gupta, Rajan; Dombroski, Derek; Schwab, C William

    2012-10-01

    The global response to the 12 January 2010 earthquake in Haiti revealed the ability to mobilise medical teams quickly and effectively when academic medical centres partner non-governmental organisations (NGO) that already have a presence in a zone of devastation. Most established NGOs based in a certain region are accustomed to managing the medical conditions that are common to that area and will need additional and specialised support to treat the flux of myriad injured persons. Furthermore, an NGO with an established presence in a region prior to a disaster appears better positioned to provide sustained recovery and rehabilitation relief. Academic medical centres can supply these essential specialised resources for a prolonged time. This relationship between NGOs and academic medical centres should be further developed prior to another disaster response. This model has great potential with regard to the rapid preparation and worldwide deployment of skilled medical and surgical teams when needed following a disaster, as well as to the subsequent critical recovery phase. © 2012 The Author(s). Journal compilation © Overseas Development Institute, 2012.

  10. Southwestern Institute of Physics annual report (2000)

    International Nuclear Information System (INIS)

    2001-01-01

    The research results and engineering progress of SWIP (Southwestern Institute of Physics) during the year of 2000 was summarized in this annual report. The contents divided into five parts: 1. tokamak experimental diagnoses and tokamak engineering; 2. fusion reactor and fusion reactor materials; 3. plasma theory and calculation; 4. technique development and application; 5. appendix 31 theses and presented in this report

  11. Building four centres for demonstration of renewable energies in different regions of Brazil; Criacao de quatro centros de demonstracao de energias renovaveis em diferentes regioes do pais

    Energy Technology Data Exchange (ETDEWEB)

    Galdino, Marco Antonio; Dutra, Ricardo Marques; Bezerra, Lauro Barde; Ramos, Marcia da Rocha [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil)], Emails: marcoag@cepel.br, dutra@cepel.br, laurobb@cepel.br, marciar@cepel.br; Hommerding, Luis Carlos; Motta, Sergio Luiz Souza [Servico Nacional de Aprendizagem Industrial (SENAI/DN), Brasilia, DF (Brazil)], Emails: LuisHommerding@dn.senai.br, slmotta@dn.senai.br

    2010-07-01

    This article presents the projects of four Centres for Demonstration of Renewable Energies, to be build within an agreement between CEPEL (Electric Power Research Center - Centro de Pesquisas de Energia Eletrica) and SENAI (National Institute for Industrial Education - Servico Nacional de Aprendizagem Industrial). This agreement aims to replicate the successful experience of The Solar House of CEPEL. With a budget of circa one million reais, these Centres will include two Solar Houses (SENAI-DF and SENAI-MA), a mobile unit mounted in a van (SENAI-PR), as well as another mobile unit mounted in a boat (SENAI-AM). Using these centres as learning material, it is expected that SENAI, an institution with the well-known competence in technical education, will be prepared to increase the amount of technical personnel qualified in photovoltaics. It is also expected that these Centres will incentive the use of such technologies throughout the country. (author)

  12. Computerized materials protection, control, and accountability at the Institute of Physics and Power Engineering

    International Nuclear Information System (INIS)

    Efimenko, V.; Goryunov, V.; Ilyantsev, A.

    1998-01-01

    As part of a multifaceted approach to protecting its nuclear materials, The Institute of Physics and Power Engineering (IPPE) at Obninsk, Russia, has been computerizing its materials protection, control, and accountability capabilities. This is being accomplished in collaboration with the CoreMAS team at Los Alamos National Laboratory. Such international cooperation in applying advanced science and technology to managing and controlling nuclear materials will help reduce the threat of nuclear weapons proliferation by preventing acquisition of weapons-grade nuclear materials by unauthorized individuals, organizations, or states. One important characteristic of IPPE is that it encompasses several facilities that manage nuclear materials, and three of these facilities already operate their own independent (or independently developed) computerized accounting systems. This paper focuses on the importance of compatibility between the computerized accountability systems at the facilities, the ability of the individual systems to communicate with a single site-wide system, and the necessity of coordination between facilities in designing and developing computerized systems. The authors believe that the lessons learned at IPPE in coordinating these efforts have wide-ranging significance for other sites with multiple facilities

  13. Basic data of emergency response centre

    International Nuclear Information System (INIS)

    Jenieek, O.

    1995-01-01

    Emergency Response Centre (ERC) of Czech Republic is a highly specialized institution belonging to Nuclear Safety State Administration (SONS), which assures its activities both organizationally and technically. Main function of the ERC in the case of nuclear emergency is to fulfil the needs of SONS, Governmental Committee for Nuclear Emergencies in ER (GCNE ER) and the regional organs of State Authorities concerning the emergency planning and preparedness, evaluation of nuclear emergency consequences, including the emergency management and response. In the case of major failure or accident on NPP, the ERC carries out the performance analysis and review of a given NPP. It also monitors the dosimetric situation and transfers the recommendation to GCNE ER, Regional Emergency Management Committees and to NPP

  14. Nuclear Research Centre Juelich (KFA). Annual report 1984/85

    International Nuclear Information System (INIS)

    1985-09-01

    The annual report from the Nuclear Research Centre in Juelich (KFA) consist of four differently coloured parts. The 'white part' - from the research - published topical contributions from authors writing popular science. Subjects were chosen from the viewpoint of a journalist rather than oriented on the research field of the KFA. The 'yellow part' - reports on research and development - is a survey of the scientific-technological work of KFA structured according to the main fields of research of KFA. The 'green part' - research institutes and scientific-technological joint ventures - describes tasks and objectives of the individual institutes/joint ventures. The 'blue part' - organisation, administration and technical infrastructure - contains information on management, organisation and administration of KFA (personnel department, PR, finances, purchase- and material disposal department, cost and planning, cooperation and use of know-how, projects, technical equipment). (orig.) [de

  15. Education of indoor enviromental engineering technology

    Czech Academy of Sciences Publication Activity Database

    Kic, P.; Zajíček, Milan

    2011-01-01

    Roč. 9, Spec. 1 (2011), s. 83-90 ISSN 1406-894X. [Biosystems Engineering 2011. Tartu, 12.05.2011-13.05.2011] Institutional research plan: CEZ:AV0Z10750506 Keywords : Biosystems engineering * indoor environment * study * programs Subject RIV: AM - Education http://library.utia.cas.cz/separaty/2011/VS/zajicek-education of indoor enviromental engineering technology.pdf

  16. Earthquake engineering and structural dynamics studies at Bhabha Atomic Research Centre

    International Nuclear Information System (INIS)

    Reddy, G.R.; Parulekar, Y.M.; Sharma, A.; Dubey, P.N.; Vaity, K.N.; Kukreja, Mukhesh; Vaze, K.K.; Ghosh, A.K.; Kushwaha, H.S.

    2007-01-01

    Earthquake Engineering and structural Dynamics has gained the attention of many researchers throughout the world and extensive research work is performed. Linear behaviour of structures, systems and components (SSCs) subjected to earthquake/dynamic loading is clearly understood. However, nonlinear behaviour of SSCs subjected to earthquake/dynamic loading need to be understood clearly and design methods need to be validated experimentally. In view of this, three major areas in earthquake engineering and structural dynamics identified for research includes: design and development of passive devices to control the seismic/dynamic response of SSCs, nonlinear behaviour of piping systems subjected to earthquake loading and nonlinear behavior of RCC structures under seismic excitation or dynamic loading. BARC has performed extensive work and also being continued in the above-identified areas. The work performed is helping for clearer understanding of nonlinear behavior of SSCs as well as in developing new schemes, methodologies and devices to control the earthquake response of SSCs. (author)

  17. The Aube centre; Le Centre de l`Aube

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This educational booklet is devoted to a general presentation of the Aube radioactive wastes storage centre. After a short presentation of the Andra, the French national agency for the management of radioactive wastes, it gives some general information about radioactive wastes (origin, classification), containers (quality assurance and different types), wastes transportation (planning, safety), and about the Aube centre itself: description, treatment and conditioning of drums (compacting and injection), storage facilities, geological situation of the site, and environmental controls. (J.S.)

  18. An inter-centre quality assurance network for IMRT verification: Results of the ESTRO QUASIMODO project

    International Nuclear Information System (INIS)

    Gillis, Sofie; Wagter, Carlos de; Bohsung, Joerg; Perrin, Bruce; Williams, Peter; Mijnheer, Ben J.

    2005-01-01

    Background and purpose: IMRT necessitates extension of existing inter-centre quality assurance programs due to its increased complexity. We assessed the feasibility of an inter-centre verification method for different IMRT techniques. Materials and methods: Eight European radiotherapy institutions of the QUASIMODO network, have designed an IMRT plan for a horseshoe-shaped PTV surrounding a cylindrical OAR in a simplified pelvic phantom. All centres applied common plan objectives but used their own equipment for planning and delivery. They verified the delivery of this plan according to a common protocol with radiographic film and ionisation chamber measurements. The irradiated films, the results of the ionisation chamber measurements and the computed dose distributions were sent to one analysis centre that compared the measured and computed dose distributions with the gamma method and composite dose-area histograms. Results: 4% (relative to the prescribed dose) and 3 mm (distance-to-agreement) were decided feasible gamma criteria. The composite dose-area histograms showed a maximum local deviation of 3.5% in the mean dose of the PTV and 5% in the OAR. Systematic differences could be identified, and in some cases explained. Conclusions: This multi-centre dosimetric verification study demonstrated both the feasibility of a multi-centre quality assurance network to evaluate any IMRT planning and delivery system combination, as well as the validity of the methodology involved

  19. Public health engineering education in India: current scenario, opportunities and challenges.

    Science.gov (United States)

    Hussain, Mohammad Akhtar; Sharma, Kavya; Zodpey, Sanjay

    2011-01-01

    Public health engineering can play an important and significant role in solving environmental health issues. In order to confront public health challenges emerging out of environmental problems we need adequately trained public health engineers / environmental engineers. Considering the current burden of disease attributable to environmental factors and expansion in scope of applications of public health / environmental engineering science, it is essential to understand the present scenario of teaching, training and capacity building programs in these areas. Against this background the present research was carried out to know the current teaching and training programs in public health engineering and related disciplines in India and to understand the potential opportunities and challenges available. A systematic, predefined approach was used to collect and assemble the data related to various teaching and training programs in public health engineering / environmental engineering in India. Public health engineering / environmental engineering education and training in the country is mainly offered through engineering institutions, as pre-service and in-service training. Pre-service programs include diploma, degree (graduate) and post-graduate courses affiliated to various state technical boards, institutes and universities, whereas in-service training is mainly provided by Government of India recognized engineering and public health training institutes. Though trainees of these programs acquire skills related to engineering sciences, they significantly lack in public health skills. The teaching and training of public health engineering / environmental engineering is limited as a part of public health programs (MD Community Medicine, MPH, DPH) in India. There is need for developing teaching and training of public health engineering or environmental engineering as an interdisciplinary subject. Public health institutes can play an important and significant role in this

  20. Improved operability of the CANDU 9 control centre

    International Nuclear Information System (INIS)

    Macbeth, M. J.; Webster, A.

    1996-01-01

    The next generation CANDU nuclear power plant being designed by AECL is the 900 MWe class CANDU 9 station. It is based upon the Darlington CANDU station design which is among the world leaders in capacity factor with low Operation, Maintenance and Administration (OM and A) costs. This Control Centre design includes the proven functionality of existing CANDU control centres (including the Wolsong 2,3, and 4 control centre improvements, such as the Emergency Core Cooling panels), the characteristics identified by systematic design with human factors analysis of operations requirements and the advanced features needed to improve station operability which is made possible by the application of new technology. The CANDU 9 Control Centre provides plant staff with an improved operability capability due to the combination of proveness, systematic design with human factors engineering and enhanced operating features. Significant features which contribute to this improved operability include: · Standard NSP, BOP and F/H panels with controls and indicators integrated by a standard display/presentation philosophy. · Common plant parameter signal database for extensive monitoring, checking, display and annunciation. · Powerful annunciation system allowing alarm filtering, prioritizing and interrogation to enhance staff recognition of events, plant state and required corrective procedural actions. · The use of an overview display to present immediate and uncomplicated plant status information to facilitate operator awareness of unit status in a highly readable and recognizable format. · Extensive cross checking of similar process parameters amongst themselves, with the counterpart safety system parameters and as well as with 'signature' values obtained from known steady state conditions. · Powerful calculation capabilities, using the plant wide database, providing immediate recognizable and readable and readable output data on plant state information and plant state change