WorldWideScience

Sample records for energy reform measures

  1. Reforming Romanian energy policy

    International Nuclear Information System (INIS)

    Perkins, S.

    1993-01-01

    Success in reforming energy sector depends on the implementation of the programme of economic reform agreed in February 1993. The difficulty of the negotiations between the International Monetary Fund and the Romanian government reflects the wider difficulties faced by the economy as a whole. They can be blamed in part on the legacy of uneconomic and inflexible industrial development and in part on opposition from interest groups which stand to lose from reform. Nonetheless, in spite of hesitant approach, the government does appear committed to the economic reform necessary to establish a market-oriented economy. But as the danger of a financial crisis engendered by the inadequately supported short-term borrowing of foreign exchange becomes urgent, the question is whether economic reform can be now implemented fast enough to protect economic enterprises and saving from a debt crisis. The scope for further delay in implementing the 1993 economic reform programme is fast disappearing. Procrastination should not be allowed to threaten the success of the reforms achieved in the energy and other sectors of the economy. 8 refs., 2 figs

  2. The Danish Energy Reform

    International Nuclear Information System (INIS)

    Hoffmann, P.

    2001-01-01

    Since 1998 Denmark has been in a process of re-regulating its energy market introducing competition and incentive based economic regulation. The ''Danish model'' reflects specific Danish political priorities on energy, environment and the role of the energy consumers. The paper focuses on the electricity sector, tracing the reasons why Denmark re-regulates the way it does and what are the results. Denmark is a small country of 43000 2 kilometers and 5.3 million inhabitants. Denmark is a net-exporter of oil and gas produced in the North Sea. The hydro-resources are negligible. Renewable energy, however, covers 11 percent of gross energy consumption.(author)

  3. Energy Analysis in Combined Reforming of Propane

    Directory of Open Access Journals (Sweden)

    K. Moon

    2013-01-01

    Full Text Available Combined (steam and CO2 reforming is one of the methods to produce syngas for different applications. An energy requirement analysis of steam reforming to dry reforming with intermediate steps of steam reduction and equivalent CO2 addition to the feed fuel for syngas generation has been done to identify condition for optimum process operation. Thermodynamic equilibrium data for combined reforming was generated for temperature range of 400–1000°C at 1 bar pressure and combined oxidant (CO2 + H2O stream to propane (fuel ratio of 3, 6, and 9 by employing the Gibbs free energy minimization algorithm of HSC Chemistry software 5.1. Total energy requirement including preheating and reaction enthalpy calculations were done using the equilibrium product composition. Carbon and methane formation was significantly reduced in combined reforming than pure dry reforming, while the energy requirements were lower than pure steam reforming. Temperatures of minimum energy requirement were found in the data analysis of combined reforming which were optimum for the process.

  4. Nuclear damage compensation and energy reform

    International Nuclear Information System (INIS)

    Yokemoto, Masafumi

    2013-01-01

    Nuclear damage compensation and energy reform were closely related. Nuclear damage compensation cost should be part of generation cost of nuclear power. Extend of nuclear damage compensation was limited by compensation standard of Tokyo Electric Power Co. (TEPCO) following guidelines of Dispute Reconciliation Committee for Nuclear Damage Compensation. TEPCO had already paid compensation of about two trillion yen until now, which was only a part of total damage compensation cost. TEPCO had been provided more than 3.4 trillion yen by Nuclear Damage Liability Facilitation Cooperation, which would be put back by nuclear operators including TEPCO. TEPCO could obtain present raising funds and try to reconstruct business with restart of nuclear power, which might disturb energy reform. Present nuclear damage compensation scheme had better be reformed with learning more from Minamata disease case in Japan. (T. Tanaka)

  5. Croatian Energy Sector Reform - Results Achieved

    International Nuclear Information System (INIS)

    Nota, R.

    2001-01-01

    During the past ten years, the energy sector has passed through significant changes including fundamental market, economic, legislative and institutional aspects of sector operation. As the main goal of the Republic of Croatia is the integration into the European Union, the energy sector reform ought to be conducted in keeping with the present market development processes of the EU in such a way as to fulfil all safety criteria. In view of the above mentioned, the Croatian Parliament brought a number of laws during its session in July 2001 (''Official Gazette'' 68/01): 1. Energy Law 2. Energy Activities Regulation Law 3. Electricity Market Law 4. Gas Market Law 5. Oil and Oil Derivatives Market Law, which present the commencement of the energy sector reform (www.mingo.hr).(author)

  6. Renewable energy policy and electricity market reforms in China

    International Nuclear Information System (INIS)

    Cherni, Judith A.; Kentish, Joanna

    2007-01-01

    The article examines the potential effectiveness of the renewable energy policy in China and its regulatory Law framework. It frames the option of renewable energy technology within the background of the long-lasting electricity problems that China has faced including serious supply shortages, reliance on coal, and severe environmental contamination. Its dual administrative and ownership system based on state and privately owned industry is discussed together with the market reform measures adopted in the sector. Current renewable energy policy is analysed, and the scope of the 2005 Renewable Energy Promotion Law is investigated. This is conducted within the context of the electricity sector reform that China adopted, and its effects upon the prospects of encouraging as well as expanding the development of renewable energy. This study draws upon primary information collected from interviews with stakeholders on the policy adequacy, and identifies three main types of shortcomings that have interfered with a more successful expansion of renewable energy in China

  7. Energy sector reform in India : a review

    International Nuclear Information System (INIS)

    Aruna, M.; Raj, M.G.

    2008-01-01

    The government of India cannot afford to fund the total investment needed for restructuring the country's electric power sector. As such, India's Electricity Act of 2003 encouraged private participation to implement the required measures for efficient and optimum use of energy resources available in India and to supply quality power at the best cost to consumers. This paper described the present status of India's power sector with respect to generation, transmission and distribution of electricity. India's economy is growing at a faster rate compared to many other developing countries. It is expected that in the next 6 to 7 years additional capacity of 84,000 MW will be needed to meet the projected electricity demand. The Power Finance Corporation Limited (PFC) was established in 1986 in order to generate and provide funds for the power sector, which is in the process of reforms in every element of the electricity value chain. India is facing an energy deficit and peak power deficit of 8 per cent and 12.2 per cent, respectively. The inter-regional power transmission capacity is planned to be increased from 16,500 MW to 37,000 MW by 2012. Thermal and nuclear energy are major sources for electricity production in India. As most of these resources are non renewable, they must be efficiently used. Coal will continue to contribute about 60 per cent of power generation in India. It was concluded that a large capacity national power grid is necessary for inter-regional power transfer, and that Transmission Super Highways are needed for the development of a high capacity National Power Grid. 7 refs., 1 tab., 3 figs

  8. Energy sector reform, energy transitions and the poor in Africa

    International Nuclear Information System (INIS)

    Prasad, Gisela

    2008-01-01

    There is little systematic information about the impact of energy sector reform on all sources and methods of energy utilised or potentially utilised by the poor. It is not sufficiently known what fuels the poor use, if a larger range of fuels becomes available and affordable and if barriers to access and consumption are reduced. A detailed assessment is presented for four countries, three in Africa (Botswana, Ghana and Senegal) and for comparison one in Latin America (Honduras), of steps taken to reform the energy sector and their effect on various groups of poor households. The paper analyses the pattern of energy supply to, and use by, poor households and explores the link-or its absence-to energy policy. We investigate what works for the poor and which type of reforms and implementation are effective and lead to a transition to more efficient and clean fuels from which the poor benefit. Energy sector reforms when adjusted to the specific conditions of the poor have a positive impact on access and use of clean, safe and efficient fuels. The poor are using gradually less wood as cooking fuel. Gas and kerosene are made more widely available through market liberalisation and subsidy in the particular case of Senegal. Electricity access and use is generally promoted or subsidised through changes in payment conditions and lifeline tariffs

  9. A Scorecard for Energy Reform in Developing Countries

    OpenAIRE

    Robert Bacon

    1999-01-01

    Only a handful of developing countries have fully reformed their energy sector - oil, gas, and power. A World Bank Survey of 115 developing countries shows that on average, in mid-1998 just 39 percent of key reform steps had been carried out. There are large variations among countries in the number of reform steps take, with most reforms concentrated in a small number of countries. In a gr...

  10. Energy sector reforms status of Danish energy policy - 2000

    International Nuclear Information System (INIS)

    Gullev, L.

    2000-01-01

    The new millennium brings change and new ways of thinking to the energy sector. Today the sector faces new challenges which it must deal with at a time where increasing market liberalisation and increasing internalisation is creating completely new frameworks for the sector. The Danish tradition of progressive energy policy action plans is the best possible basis on which to build. The target remains set. Energy policy must create the framework for structuring future energy systems so as to ensure that they are sustainable. Over many years there have been numerous initiatives to transfer consumption to cleaner energy sources, which has now led to a steady reduction in CO 2 emissions. The government places great importance on a continuation of this current development, both short term and long term. The adoption of the Electricity Reform in spring 1999 was an important step in the right direction. The government can, with great satisfaction, conclude that an agreement has now been made with most of the Parliament regarding a Gas reform, modernisation of the heat Supply Act and a new Energy Saving Act. In addition to this, the agreement also includes a follow up to the Electricity Reform concerning utilisation of biomass, offshore wind turbines, harmonisation of costs for priority electricity production, private generator's payment to priority electricity and the establishment of a market for electricity based on renewable. (author)

  11. Energy policies in the European Union. Germany's ecological tax reform

    International Nuclear Information System (INIS)

    Welfens, P.J.J.; Jungmittag, A.; Meyer, B.; Jasinski, P.

    2001-01-01

    The chapters discuss the following aspects: 1. Energy policy as a strategic element of economic policy in dynamic open economies. 2. Phasing out nuclear energy and core elements of sustainable energy strategy. 3. Ecological tax reform: Theory, modified double dividend and international aspects. 4. The policy framework in Europe and Germany. 5. Optimal ecological tax reform: Options and recommendations for an EU-action plan. 6. Conclusions. (orig./CB)

  12. Roadmap of retail electricity market reform in China: assisting in mitigating wind energy curtailment

    Science.gov (United States)

    Yu, Dezhao; Qiu, Huadong; Yuan, Xiang; Li, Yuan; Shao, Changzheng; Lin, You; Ding, Yi

    2017-01-01

    Among the renewable energies, wind energy has gained the rapidest development in China. Moreover wind power generation has been penetrated into power system in a large scale. However, the high level wind curtailment also indicates a low efficiency of wind energy utilization over the last decade in China. One of the primary constraints on the utilization of wind energy is the lack of an electricity market, in which renewable energies can compete equally with traditional fossil fuel generation. Thus the new round electric power industry reform is essential in China. The reform involves implementing new pricing mechanism, introducing retail-side competition, promoting the consumption of renewable energy. The new round reform can be a promising solution for promoting the development and consumption of wind energy generation in China. Based on proposed reform policies of electric power industry, this paper suggests a roadmap for retail electricity market reform of China, which consists of three stages. Barriers to the efficient utilization of wind energy are also analysed. Finally, this paper introduces several efficient measures for mitigating wind curtailment in each stage of reform.

  13. Towards the energy sector reform in the Republic of Croatia

    International Nuclear Information System (INIS)

    Kalea, M.

    2000-01-01

    The paper attempts to isolate those objectives of the entire energy sector's forthcoming reform in the Republic of Croatia that are most consistent with the current situation as well as with reasonable needs and realistic possibilities. Based on the comparison with the experience of certain European countries where we usually look for respective models, this paper calls for caution regarding possible implementation of their models in energy sector reform. (author)

  14. Energy transition. Between reform and revolution

    International Nuclear Information System (INIS)

    Laville, Bettina

    2014-07-01

    The author comments the content of the French bill project on energy transition. She first discusses the meaning of this concept of energy transition which can be perceived as an evolution, a transformation, a progressive change, rather than a revolution. She recalls the original debate between those who wanted to preserve nuclear energy because it does not produce CO 2 emissions, and those who wanted a more radical change of the energy system. In this respect, she outlines and comments the main statements made by the French President on these issues, and indicates the main measures defined in the bill project regarding the reduction of greenhouse gas emission, the increase of the share of renewable energies, a decrease of the share of nuclear in power production, and a reduction of energy consumption. Then, she discusses how this transition is to be financed, proposes an assessment and a discussion of the skills and shortcomings of the bill project. She notably states that the main shortcoming is the lack of strong objectives regarding the reduction of emissions by transports, and the development of inter-modality. She also regrets the disappearance of the regional public service of energy efficiency, the fact that electricity consumption is not capped. Because of that, it's not that sure that the reduction of greenhouse gas emission by a factor 4 in 2050 with respect to 1990 will be reached. In the next parts, the author discusses the issue of the ecologic tax policy, outlines the importance of being exemplary within the perspective of the 2015 Conference on Climate (COP21)

  15. Economic policy reform : Measurement, causes and consequences

    NARCIS (Netherlands)

    Wiese, Rasmus Holland Thomsen

    2016-01-01

    In the aftermath of the Great Recession it has become clear that significant problems with government debt exist in developed economies. To restore sustainability of fiscal policy governments need to implement (successful) economic reforms. This thesis investigates under which economic and political

  16. Energy market reform - lessons learned and next steps

    International Nuclear Information System (INIS)

    Doucet, G.

    2004-01-01

    This presentation will be based on the World Energy Council's recently published report, Energy Market Reform: Lessons Learned and Next Steps with Special Emphasis on the Energy Access Problems of Developing Countries. The report draws on practical lessons from past studies carried out by the World Energy Council and on current experiences on the desirable architecture of market reforms in electricity and natural gas. The approach of the study was not to further deepen the analysis or to provide technical recommendations but rather, to build a debate guided by the common thread of energy security and end-user e mpowerment , highlighting the possible areas of conflict of interest and the broad solutions that might be chosen depending on the local circumstances for different parts of the energy chains. The ambition was to identify key concerns and to initiate a debate on possible answers.(author)

  17. Energy reforms in central and eastern Europe - The first year

    International Nuclear Information System (INIS)

    1991-01-01

    The first stages of the energy reforms in central and eastern Europe - taking stock of the heritage of the past and conceptualizing the nature of reforms - were accomplished in 1990. While two countries - the USSR and Albania -introduced some market economy elements into central energy planning and basically maintained the latter, all other countries of central and eastern Europe opted for a replacement of central energy planning by market-oriented energy policies and practices. In those latter countries, a typical policy of market adaptation emerged consisting of a change of policies, institutions, economic instruments and relations. Differences in the conditions prevailing in the various countries resulted in the emergence of specific national ''models'' of market adaptation. The reforms, if successful, would imply: greater energy efficiency, reduced pollution, enhanced nuclear safety, a reduced impact on the climate, greater business opportunities, the closure of uneconomic capacities, a decline of coal production, a rise in unemployment; a rise of the energy trade dependence coupled with a rise of gas and oil imports; but practically no change of the net energy exports of the USSR. By the end of 1990 developed market economies agreed to co-ordinate assistance (within the ''Group of 24'') and determined the type and modalities of support. This support would enable and encourage the economies in transition to finalize reform, stimulate their practical implementation and address side effects (disinvestments, unemployment) and systematic risks (e.g. trade dependence) and opportunities (e.g. trade diversification). The business community and lending institutions would have to assess and support investments opportunities more actively. Intergovernmental organizations will play an important role in improving the conditions for business involvement. In 1990, the frameworks for energy reforms in central and eastern Europe, short term assistance, long term business

  18. Reforming Mexico’s Energy Sector to Enhance Stability

    Science.gov (United States)

    2011-10-27

    requirement to reform Mexico’s energy sector. Subsequent analysis demonstrates government ownership of Petroleos Mexico ( Pemex ) is the fundamental... Pemex , stability 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18. NUMBER OF PAGES 19a. NAME OF RESPONSIBLE PERSON Chairman... Pemex and Stability 8 Conclusions and Recommendations 13 Policy Implications 16 Bibliography

  19. Control of nuclear energy: new aims for the reform of international institutions

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, B.

    1977-12-01

    Detailed negotiations over a possible package of measures to reform international safeguards and security managements under which nuclear technology is transferred are going on behind closed doors in the ''London Club,'' or Nuclear Suppliers' Group. The talks appear to be chiefly concentrated on bilateral agreements over national measures of control. The author examines some possible aims and functions that seem reasonable targets for negotiated reform over the coming months. These would include: jointly guaranteed supplies of low-enriched uranium for thermal reactors; a new international safeguards system; international nuclear security and safety standards; international agreement on nuclear waste disposal measures; international institutional initiative to promote alternative energy sources; functional reform of the IAEA; and reorganized regulatory review processes at national levels. (MCW)

  20. The effects of the energy price reform on households consumption in Iran

    International Nuclear Information System (INIS)

    Moshiri, Saeed

    2015-01-01

    The substantial subsidizing of energy prices over the years has led to high energy consumption, inefficiencies, fiscal pressures, and environmental problems in Iran. To address the increasing socio-economic problems associated with the energy subsidies, the government embarked on an aggressive energy price reform through which energy subsidies were removed and cash handouts were given to all households in 2010. In this paper, I analyze the effectiveness of the energy price reform in Iran by estimating energy demand elasticities for households in different income groups. I apply a two-stage consumer optimization model and estimate the system of energy expenditures shares using the household budget survey data for the period 2001–2008. The results show that the overall price elasticities of demand are small, but income elasticities are close to one. The results also indicate heterogeneous responses to energy price and income changes in different income groups. Specifically, the urban households show stronger response to price changes, but rural households, particularly mid-income households, to income changes. These findings suggest that the current policy of price increases would not solely be able to reduce energy consumption and, therefore, it should be geared towards increasing energy efficiency through a series of price and non-price measures. - Highlights: • The effectiveness of the recent energy price reform in Iran is analyzed. • Energy demand elasticities for households in different income groups are estimated. • A two-stage optimization model was applied to estimate the system of equations using micro-data for 2001–2008. • The price elasticities are small and income elasticities rather large, but responses are heterogeneous. • A price and non-price reform policy package is needed for different income groups and regions

  1. A revisit of fossil-fuel subsidies in China: Challenges and opportunities for energy price reform

    International Nuclear Information System (INIS)

    Lin, Boqiang; Ouyang, Xiaoling

    2014-01-01

    Highlights: • We measure fossil-fuel subsidies and effects of subsidy removal in a systematic fashion during 2006–2010. • Fossil-fuel subsidies scale of China was CNY 881.94 billion in 2010, equivalent to 2.59% of GDP. • Impacts of removing subsidies on macroeconomic variables are examined by the CGE model. • Future policy should focus on designing transparent, targeted and efficient energy subsidies. - Abstract: Fossil-fuel subsidies contribute to the extensive growth of energy demand and the related carbon dioxide emissions in China. However, the process of energy price reform is slow, even though China faces increasing problems of energy scarcity and environmental deterioration. This paper focuses on analyzing fossil fuel subsidies in China by estimating subsidies scale and the implications for future reform. We begin by measuring fossil-fuel subsidies and the effects of subsidy removal in a systematic fashion during 2006–2010 using a price-gap approach. Results indicate that the oil price reform in 2009 significantly reduced China’s fossil-fuel subsidies and modified the subsidy structure. Fossil-fuel subsidies scale in China was 881.94 billion CNY in 2010, which was lower than the amount in 2006, equivalent to 2.59% of the GDP. The macro-economic impacts of removing fossil-fuel subsidies are then evaluated by the computable general equilibrium (CGE) model. Results demonstrate that the economic growth and employment will be negatively affected as well as energy demand, carbon dioxide and sulfur dioxide emissions. Finally, policy implications are suggested: first, risks of government pricing of energy are far from negligible; second, an acceptable macroeconomic impact is a criterion for energy price reform in China; third, the future energy policy should focus on designing transparent, targeted and efficient energy subsidies

  2. Developing an energy efficient steam reforming process to produce hydrogen from sulfur-containing fuels

    Science.gov (United States)

    Simson, Amanda

    Hydrogen powered fuel cells have the potential to produce electricity with higher efficiency and lower emissions than conventional combustion technology. In order to realize the benefits of a hydrogen fuel cell an efficient method to produce hydrogen is needed. Currently, over 90% of hydrogen is produced from the steam reforming of natural gas. However, for many applications including fuel cell vehicles, the use of a liquid fuel rather than natural gas is desirable. This work investigates the feasibility of producing hydrogen efficiently by steam reforming E85 (85% ethanol/15% gasoline), a commercially available sulfur-containing transportation fuel. A Rh-Pt/SiO2-ZrO2 catalyst has demonstrated good activity for the E85 steam reforming reaction. An industrial steam reforming process is often run less efficiently, with more water and at higher temperatures, in order to prevent catalyst deactivation. Therefore, it is desirable to develop a process that can operate without catalyst deactivation at more energy efficient conditions. In this study, the steam reforming of a sulfur-containing fuel (E85) was studied at near stoichiometric steam/carbon ratios and at 650C, conditions at which catalyst deactivation is normally measured. At these conditions the catalyst was found to be stable steam reforming a sulfur-free E85. However, the addition of low concentrations of sulfur significantly deactivated the catalyst. The presence of sulfur in the fuel caused catalyst deactivation by promoting ethylene which generates surface carbon species (coke) that mask catalytic sites. The amount of coke increased during time on stream and became increasingly graphitic. However, the deactivation due to both sulfur adsorption and coke formation was reversible with air treatment at 650°C. However, regenerations were found to reduce the catalyst life. Air regenerations produce exotherms on the catalyst surface that cause structural changes to the catalyst. During regenerations the

  3. What triggers reforms in OECD countries? Improved reform measurement and evidence from the healthcare sector

    NARCIS (Netherlands)

    Wiese, Rasmus

    The main contribution of this paper is the development of a novel and versatile methodology to identify economic reforms. The methodology is a combination of the Bai & Perron structural break filter, and validation of the structural breaks identified using de jure evidence of reforms. The procedure

  4. Methodology and estimation of the welfare impact of energy reforms on households in Azerbaijan

    Science.gov (United States)

    Klytchnikova, Irina

    This dissertation develops a new approach that enables policy-makers to analyze welfare gains from improvements in the quality of infrastructure services in developing countries where data are limited and supply is subject to interruptions. An application of the proposed model in the former Soviet Republic of Azerbaijan demonstrates how this approach can be used in welfare assessment of energy sector reforms. The planned reforms in Azerbaijan include a set of measures that will result in a significant improvement in supply reliability, accompanied by a significant increase in the prices of energy services so that they reach the cost recovery level. Currently, households in rural areas receive electricity and gas for only a few hours a day because of a severe deterioration of the energy infrastructure following the collapse of the Soviet Union. The reforms that have recently been initiated will have far-reaching poverty and distributional consequences for the country as they result in an improvement in supply reliability and an increase in energy prices. The new model of intermittent supply developed in this dissertation is based on the household production function approach and draws on previous research in the energy reliability literature. Since modern energy sources (network gas and electricity) in Azerbaijan are cleaner and cheaper than the traditional fuels (fuel wood, etc.), households choose modern fuels whenever they are available. During outages, they rely on traditional fuels. Theoretical welfare measures are derived from a system of fuel demands that takes into account the intermittent availability of energy sources. The model is estimated with the data from the Azerbaijan Household Energy Survey, implemented by the World Bank in December 2003/January 2004. This survey includes an innovative contingent behavior module in which the respondents were asked about their energy consumption patterns in specified reform scenarios. Estimation results strongly

  5. Energy and exergy analysis of an ethanol reforming process for solid oxide fuel cell applications.

    Science.gov (United States)

    Tippawan, Phanicha; Arpornwichanop, Amornchai

    2014-04-01

    The fuel processor in which hydrogen is produced from fuels is an important unit in a fuel cell system. The aim of this study is to apply a thermodynamic concept to identify a suitable reforming process for an ethanol-fueled solid oxide fuel cell (SOFC). Three different reforming technologies, i.e., steam reforming, partial oxidation and autothermal reforming, are considered. The first and second laws of thermodynamics are employed to determine an energy demand and to describe how efficiently the energy is supplied to the reforming process. Effect of key operating parameters on the distribution of reforming products, such as H2, CO, CO2 and CH4, and the possibility of carbon formation in different ethanol reformings are examined as a function of steam-to-ethanol ratio, oxygen-to-ethanol ratio and temperatures at atmospheric pressure. Energy and exergy analysis are performed to identify the best ethanol reforming process for SOFC applications. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Measuring industrial energy savings

    International Nuclear Information System (INIS)

    Kelly Kissock, J.; Eger, Carl

    2008-01-01

    Accurate measurement of energy savings from industrial energy efficiency projects can reduce uncertainty about the efficacy of the projects, guide the selection of future projects, improve future estimates of expected savings, promote financing of energy efficiency projects through shared-savings agreements, and improve utilization of capital resources. Many efforts to measure industrial energy savings, or simply track progress toward efficiency goals, have had difficulty incorporating changing weather and production, which are frequently major drivers of plant energy use. This paper presents a general method for measuring plant-wide industrial energy savings that takes into account changing weather and production between the pre and post-retrofit periods. In addition, the method can disaggregate savings into components, which provides additional resolution for understanding the effectiveness of individual projects when several projects are implemented together. The method uses multivariable piece-wise regression models to characterize baseline energy use, and disaggregates savings by taking the total derivative of the energy use equation. Although the method incorporates search techniques, multi-variable least-squares regression and calculus, it is easily implemented using data analysis software, and can use readily available temperature, production and utility billing data. This is important, since more complicated methods may be too complex for widespread use. The method is demonstrated using case studies of actual energy assessments. The case studies demonstrate the importance of adjusting for weather and production between the pre- and post-retrofit periods, how plant-wide savings can be disaggregated to evaluate the effectiveness of individual retrofits, how the method can identify the time-dependence of savings, and limitations of engineering models when used to estimate future savings

  7. China's energy economy. Situation, reforms, behavior, and energy intensity

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Hengyun [Henan Agricultural Univ., Zhengzhou (China). College of Economics and Management; Oxley, Les [Univ. of Canterbury, Christchurch (New Zealand). Dept of Economics and Finance

    2012-07-01

    In the new millennium, understanding China's energy economy is crucial for politicians, businesspeople and energy economists, as China's energy policy choices will mean both challenges and opportunities for the world in terms of an increasing share of primary energy consumption and investment. This book initially reviews the literature on China's energy economy and in so doing reveals that many important areas have been overlooked or are outdated in their coverage. Given the size of China and its global importance, the book then review s China's current energy situation and fills the gaps in the literature for those who are interested in and concerned about China's economic development and energy reform in the new millennium. The book is different from previous studies in several important ways: Firstly, it presents recent, pioneering research rather than a simple textbook, several sections of which have been published in high-quality energy journals. Secondly, the book first subdivides China's energy intensity change into aspects of budget constraint, technological change, factor substitution, energy demand and economic growth using a newly developed econometric approach. Thirdly, it provides many new and different econometric findings and derives many new policy implications for China's energy economy. And lastly, it brings to light a wealth of new knowledge for those who are interested in China's energy economy, the world energy market and global environmental and climate change issues.

  8. Contribution to electrical energy sector reform: Maghreb's case

    International Nuclear Information System (INIS)

    Rahmouni, A.

    2008-01-01

    This article presents an electrical energy sector reform 'initiative' adapted to developing countries, in particular those of Maghreb, in order to promote competitive electricity business outside of market structures. It is a matter 1) of authorizing access to networks and international interconnections for all high or low voltage consumers, in particular those very sensitive to electricity prices and to competition, in order to get electricity supply on foreign markets and/or from private producers and/or develop their own productions directly or via consortium; 2) of authorizing access to networks and international interconnections for every independent production destined for internal and/or foreign markets, resulting especially in the development of competitive supplies which are renewable or reduce network constraints; 3) of initiating (or promoting) the integrated management of supply, demand and network systems, around the fundamental principles of technical and economical optimizations, bearing in mind the sector's unique character in order to develop the trans-border electricity business. Much appreciated by internal and external economic operators, the outcome of this initiative applied to the development of self generation and launched for the first time in Morocco, is impressive, since less than one year following its launch, several national and foreign company associations committed, by way of signed agreements, to equip around a dozen wind energy sites spread across the whole of the land and totaling a power of more than 1000 MW so 20% to 25% of the country's current peak demand. Some of the region's countries have shown their keen interest in this solution. In addition, analysis and simulation studies carried out on the integrated systems of Maghreb and the Iberian Peninsula show that access to international networks and interconnections in order to choose one's own suppliers, means among other things that significant gains on production costs of

  9. Measuring and Explaining regulatory Reform in the EU

    DEFF Research Database (Denmark)

    Citi, Manuele; Justesen, Mogens Kamp

    Over the last three decades, EU regulation of the internal market has become highly pervasive, affecting practically all the domains of European citizens’ lives. Many studies have focused on understanding the process and causes of regulatory reform. However, these have typically been small...... different sectors, and analyse the dynamics of regulatory reform in the EU. Using time series analysis of count data, we find evidence that the number of winning coalitions in the Council and the size of EU membership have a significant impact on regulatory reform in the EU. However, the political (left...

  10. Energy-efficient biogas reforming process to produce syngas: The enhanced methane conversion by O2

    International Nuclear Information System (INIS)

    Chen, Xuejing; Jiang, Jianguo; Li, Kaimin; Tian, Sicong; Yan, Feng

    2017-01-01

    Highlights: • The effect of O 2 content from 0 to 15% on Ni/SiO 2 are studied for biogas reforming. • The presence of O 2 in biogas improves CH 4 conversion and stability of biogas reforming. • An obvious carbon-resistance effect is observed due to the carbon gasification effect of O 2 in biogas. • The presence of O 2 in biogas greatly helps inhibit the catalyst sintering. - Abstract: We report an energy-efficient biogas reforming process with high and stable methane conversions by O 2 presence. During this biogas reforming process, the effects of various O 2 concentrations in biogas on initial conversions and stability at various temperatures on a Ni/SiO 2 catalyst were detailed investigated. In addition, theoretical energy consumption and conversions were calculated based on the Gibbs energy minimization method to compare with experimental results. Carbon formation and sintering during the reforming process were characterized by thermal gravity analysis, the Brunauer-Emmett-Teller method, X-ray diffraction, and high-resolution transmission electron microscopy to investigate the feasibility of applying this process to an inexpensive nickel catalyst. The results showed that 5% O 2 in biogas improved the CH 4 conversion and stability of biogas reforming. The enhancement of stability was attributed to the inhibited sintering, our first finding, and the reduced carbon deposition at the same time, which sustained a stable conversion of CH 4 , and proved the applicability of base Ni catalyst to this process. Higher O 2 concentrations (⩾10%) in biogas resulted in severe decrease in CO 2 conversion and greater H 2 O productivity. Our proposed biogas reforming process, with a high and stable conversion of CH 4 , reduced energy input, and the applicability to inexpensive base metal catalyst, offers a good choice for biogas reforming with low O 2 concentrations (⩽5%) to produce syngas with high energy efficiency.

  11. China’s energy economy situation, reforms, behavior, and energy intensity

    CERN Document Server

    Ma, Hengyun

    2012-01-01

    In the new millennium, understanding China’s energy economy is crucial for politicians, businesspeople and energy economists, as China’s energy policy choices will mean both challenges and opportunities for the world in terms of an increasing share of primary energy consumption and investment. This book initially reviews the literature on China’s energy economy and in so doing reveals that many important areas have been overlooked or are outdated in their coverage. Given the size of China and its global importance, the book then review s China’s current energy situation and fills the gaps in the literature for those who are interested in and concerned about China’s economic development and energy reform in the new millennium.   The book is different from previous studies in several important ways: Firstly, it presents recent,  pioneering research rather than a simple textbook, several sections of which have been published in high-quality energy journals. Secondly, the book first subdivides China'...

  12. The reform of the European energy tax directive: Exploring potential economic impacts in the EU27

    International Nuclear Information System (INIS)

    Rocchi, Paola; Serrano, Mònica; Roca, Jordi

    2014-01-01

    The aim of this study is to analyze the effect that the Energy Tax Directive reform proposed in 2011 would have, if implemented, on the level of prices in the different sectors of the 27 countries of the European Union. We apply a multiregional and multisectoral model of trade flows that takes into account all the intersectoral and intercountry interdependences in the production processes. Using the World Input–Output Database we perform two different simulations. The first one considers the tax changes proposed by the reform; the second one shows the impact the reform would have entailed if it were applied also to sectors belonging to the European Trade System. The main finding of the first simulation shows that the new energy tax regime would have had a low economic cost in terms of impact on prices (less than 1% in all the countries). So, the concerns about competitiveness do not find empirical support in our results, suggesting the need for further analyses to find out the reasons that caused the failure of a reform that was an important step to introduce a taxation explicitly linked to CO 2 emissions. The second simulation, however, leads to strongly different results, pointing out the relevance of maintaining significant economic incentives to reduce carbon emissions for the European Trade System sectors, by improving the emission market performance or by applying carbon taxation also to these sectors. - Highlights: • We analyze the reform of the European energy tax proposed in 2011, rejected in 2012. • We simulate what potential economic effect this reform would have if implemented. • We find that this reform would have weak effects on prices in all 27 EU countries. • We study the effect of the reform if applied to European emission market sectors. • In this second scenario, the economic impacts would have been much stronger

  13. The Fiscal Stimuli for the Implementing Ukraine’s Energy Policy and Reforming Higher Education

    Directory of Open Access Journals (Sweden)

    Synyutka Nataliya G.

    2017-07-01

    Full Text Available The article attempts to revise the issue of the State regulation of the macroeconomic processes associated with the economic, energy, fiscal, and educational reforms that are being carried out in Ukraine. In order to implement the State energy policy, fiscal approaches have been emphasized. The use of the fiscal stimulus of «carbon tax» can be seen as an effective measure for implementation of the existing State energy strategy. A review of introduction of such a tax in the developed countries confirms the expediency of applying fiscal mechanism in order to encourage investment in energy-efficient technologies. Prospects for introduction of this tax in Ukraine were considered. To this end, actual CO2 emissions have been generalized and prediction calculations for the energy sector have been accomplished. The calculated estimates of possible tax revenues have been provided. For further studies on the outlined topic, there is an impelling need to detalize the financial statistics of the ecologic tax revenues in terms of sources.

  14. Measuring Family-School Relations for School Reform and Improvement

    Science.gov (United States)

    Schueler, Beth

    2014-01-01

    A series of metaanalyses have documented a notable association between family engagement with children's learning and students' academic outcomes (Fan & Chen, 2001; Hill & Tyson, 2009; Jeynes, 2003, 2005, 2007). Family-school engagement is also associated with effective school-level reform and improvement efforts. The University of Chicago…

  15. Business Pattern of Distributed Energy in Electric Power System Reformation

    Science.gov (United States)

    Liang, YUE; Zhuochu, LIU; Jun, LI; Siwei, LI

    2017-05-01

    Under the trend of the electric power system revolution, the operation mode of micro power grid that including distributed power will be more diversified. User’s demand response and different strategies on electricity all have great influence on the operation of distributed power grid. This paper will not only research sensitive factors of micro power grid operation, but also analyze and calculate the cost and benefit of micro power grid operation upon different types. Then it will build a tech-economic calculation model, which applies to different types of micro power grid under the reformation of electric power system.

  16. Views on reform and strengthening of the nuclear energy administrative structure

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    Views of the Study Group on Nuclear Energy Administration, submitted to Prime Minister, are presented, concerning reform and strengthening of the administrative structure. They are based on the ideas of peaceful use, essential energy source, safety and administrative unification. Described are the following: Atomic Energy Commission, safeguard inspection/permission, examinations report, environmental radiation monitoring, public heating, universities relation, and radiation injuries prevention. (Mori, K.)

  17. Energy balance measurement

    DEFF Research Database (Denmark)

    Dhurandhar, N V; Schoeller, D; Brown, A W

    2015-01-01

    Energy intake (EI) and physical activity energy expenditure (PAEE) are key modifiable determinants of energy balance, traditionally assessed by self-report despite its repeated demonstration of considerable inaccuracies. We argue here that it is time to move from the common view that self......-reports of EI and PAEE are imperfect, but nevertheless deserving of use, to a view commensurate with the evidence that self-reports of EI and PAEE are so poor that they are wholly unacceptable for scientific research on EI and PAEE. While new strategies for objectively determining energy balance...... of energy balance....

  18. Energy efficiency of a direct-injection internal combustion engine with high-pressure methanol steam reforming

    International Nuclear Information System (INIS)

    Poran, Arnon; Tartakovsky, Leonid

    2015-01-01

    This article discusses the concept of a direct-injection ICE (internal combustion engine) with thermo-chemical recuperation realized through SRM (steam reforming of methanol). It is shown that the energy required to compress the reformate gas prior to its injection into the cylinder is substantial and has to be accounted for. Results of the analysis prove that the method of reformate direct-injection is unviable when the reforming is carried-out under atmospheric pressure. To reduce the energy penalty resulted from the gas compression, it is suggested to implement a high-pressure reforming process. Effects of the injection timing and the injector's flow area on the ICE-SRM system's fuel conversion efficiency are studied. The significance of cooling the reforming products prior to their injection into the engine-cylinder is demonstrated. We show that a direct-injection ICE with high-pressure SRM is feasible and provides a potential for significant efficiency improvement. Development of injectors with greater flow area shall contribute to further efficiency improvements. - Highlights: • Energy needed to compress the reformate is substantial and has to be accounted for. • Reformate direct-injection is unviable if reforming is done at atmospheric pressure. • Direct-injection engine with high-pressure methanol reforming is feasible. • Efficiency improvement by 12–14% compared with a gasoline-fed engine was shown

  19. Clean Energy Generation and Dispatch in Reformed Wholesale Electricity Markets: Experience in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Shengru [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hurlbut, David J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Li, Ma [State Grid Energy Research Institute; Fan, Zhang [State Grid Energy Research Institute; Menghua, Fan [State Grid Energy Research Institute; Jing, Li [State Grid Energy Research Institute; Haoyuan, Qu [State Grid Energy Research Institute

    2017-04-01

    In recent years, the US electricity market has undergone several stages of reform, and gradually formed the market where the wholesale electricity price is determined by the supply and demand. The US electricity market also changes along with the rapid development of clean energy, forming a number of the market mechanisms that is specifically developed for clean energy power generation characteristics. On the basis of discussing the pricing mechanism of US electricity market, this paper analyzes the experience and practice of encouraging renewable energy development policy and clean energy dispatch from the angle of market mechanism and dispatching decision, and puts forward the reference for clean energy dispatching in China.

  20. Measuring and Explaining Regulatory Reform in the EU

    DEFF Research Database (Denmark)

    Citi, Manuele; Justesen, Mogens Kamp

    2014-01-01

    Over the last three decades, European Union regulation of the internal market has become highly pervasive, affecting practically all domains of European citizens' lives. Many studies have focused on understanding the process and causes of regulatory change, but with limited attempts to analyse...... in the EU are analysed. Using time-series analysis of count data, evidence is found that the number of winning coalitions in the Council and the size of EU membership have a significant impact on regulatory reform in the EU. By contrast, the ideological composition of the EU's legislative bodies...

  1. Energy in the western Balkans - the path to reform and reconstruction

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-06-15

    The Western Balkans - composed of Albania, Bosnia and Herzegovina, Croatia, the Former Yugoslav Republic of Macedonia, Montenegro, Serbia and Kosovo - is a complex region facing significant energy challenges. The conflicts over the break-up of the former Yugoslavia damaged much of the energy infrastructure and compounded the challenge of providing reliable energy supply. Electricity systems in many parts of the region remain fragile and in need of investment. A priority across the region is to put into place the institutions, infrastructure and policies that can support the provision of reliable, affordable and sustainable energy. For the Western Balkans as a whole, a key element of the reform effort is the Energy Community Treaty - a regulatory and market framework to which the entire region has now subscribed. This Treaty aims to create an integrated regional market for electricity and gas compatible with the European Union's internal energy market. This Energy Policy Survey is the first comprehensive review of energy policies and strategies in the Western Balkan region, and also covers important cross-cutting topics such as co-operation and energy trade, oil and gas transportation, and the links between energy and poverty. It identifies and assesses the reforms that are still needed to deliver efficient, modernised energy systems that can assist economic development, address energy poverty and reduce the environmental impacts of energy use.

  2. Economic reform, energy, and development: the case of Mexican manufacturing

    International Nuclear Information System (INIS)

    Aguayo, Francisco; Gallagher, K.P.

    2005-01-01

    Given increasing concern over global climate change and national security there is a burgeoning interest in examining the relationship between economic growth and energy use in developed and developing countries. More specifically, decoupling energy use per unit of gross domestic product (GDP) has fast come to be seen as in the interests of national economies and the world as a whole. Recent attention has been paid to the dramatic decreases in the energy intensity of the Chinese economy, which fell by 55% between 1975 and 1995. Do other developing economies follow similar trajectories? This paper examines the energy intensity of the Mexican economy for the period 1988-1998. Although the long-term trend in Mexican energy intensity is rising, the energy intensity of the Mexican economy began to decline in 1988. This paper explores the factors that have contributed to this reduction. Diminishing Mexican energy use per unit of GDP has been driven by significant decreases in industrial energy intensity. We show that these changes have resulted from changes in the composition of Mexican industrial structure, and technological change

  3. Energy and behavioral impacts of integrative retrofits for residential buildings: What is at stake for building energy policy reforms in northern China?

    International Nuclear Information System (INIS)

    Xu, Peng; Xu, Tengfang; Shen, Pengyuan

    2013-01-01

    Based upon the results from extensive building monitoring and surveys on occupant’s behaviors in a representative nine-story apartment building in northern China, building energy simulations were performed to evaluate the impacts of integrative retrofits implemented. Integrative retrofits required by the newer building energy standard produced significant heating-energy savings (i.e., 53%) when compared with baseline buildings commonly built in early 1980s. Taking into account district-heating-system upgrades as part of integrative retrofit measures, a representative apartment building was 66% more efficient than the baseline building. Contrary to expectation, little behavioral change was found in response to the provisions of monetary incentive, billing-method reform, or metering of heating energy use in individual apartment units. Yet this paper identified sizable energy savings potential if occupants’ behavioral changes were to actually happen. This indicates that provisions of financial incentives or individual metering were insufficient for triggering substantial behavioral changes leading toward more energy savings in the current buildings. It is recommended that innovative energy policies, technology upgrades, and education would be needed to promote behavioral changes toward additional energy savings. Finally, measures and strategies to further enhance thermal integrity criteria (e.g., insulations of roof and balcony) are recommended in China’s future building energy policy reforms. - Highlights: ► Integrative retrofits significantly reduce residential heating energy in north China. ► Energy effects of retrofits, incentive, billing and behavioral changes were studied. ► Monetary incentive, control or metering technologies did not lead to behavior change. ► Potential energy savings due to occupants’ behavioral changes are sizable. ► Thermal integrity needs to be enhanced in future building standards and policies.

  4. Impacts of energy subsidy reform on the Malaysian economy and transportation sector

    International Nuclear Information System (INIS)

    Solaymani, Saeed; Kari, Fatimah

    2014-01-01

    Malaysia is paying a high level of subsidies on the consumption of energy (about 5% of its GDP). Therefore, reforming the energy subsidies, as planned by the government, will have a significant impact on household welfare and energy-intensive sectors, such as the transport sector. This study employs a computable general equilibrium (CGE) model to highlight the transmission channels through which the removal of energy subsidies affects the domestic economy. The findings show that the shock increases real GDP and real investment, while decreasing Malaysian total exports and imports. The removal of energy subsidies also decreases the aggregate energy demand, and, consequently, decreases the level of carbon emissions in the Malaysian economy. In addition, households experience significant falls in their consumption and welfare. The transport sector is significantly influenced through an increase in production costs due to an increase in the prices of intermediate inputs. The total output and total exports of the whole transport sector decrease while its imports increase. In addition, the use of all kinds of transport by households decreases significantly. The Malaysian energy subsidy reform, leads to an initial decrease in CO 2 emissions and demand for electricity, gas, and petroleum products in the entire transport sector. - Highlights: • Malaysia pays a high level of subsidy on consumption of energy. • The transportation sector in this country is the highest energy consumer among others. • A general equilibrium model used to analyse the effects of energy subsidy reform. • The shock increases real GDP and decreases energy and carbon emission in this sector. • It is not beneficial for the transport sector as decreases the output of this sector

  5. Energy wealth and tax reform in Russia and Kazakhstan

    International Nuclear Information System (INIS)

    Weinthal, E.; Luong, P.J.

    2001-01-01

    Resource-rich states throughout the developing world are prone to rent-seeking, excessive borrowing, wasteful spending, and unbalanced growth as well as states with weak institutions and authoritarian regimes. Are the five energy-rich Soviet successor states necessarily doomed to repeat this experience, often referred to as the 'resource curse'? This paper advances and tests the hypothesis that Russia and Kazakhstan are more likely to avoid the 'resource curse' than Uzbekistan, Turkmenistan, and Azerbaijan because they privatized their energy sectors. Specifically, we find that privatization offers a potential path out of the 'resource curse' when it involves a transfer of ownership to domestic actors. Although Kazakhstan initially appeared to be developing a viable tax regime in response to foreign investors, over the long term Kazakhstan's tax regime has become increasingly volatile and dependent upon these foreign investors. In contrast, domestic oil companies are helping to foster the development of an increasingly viable tax regime in Russia. (author)

  6. Effects of the 2011 energy tax reform to the Finnish national economy; Vuoden 2011 energiaverouudistuksen kansantaloudelliset vaikutukset

    Energy Technology Data Exchange (ETDEWEB)

    Honkatukia, J.; Tamminen, S.

    2013-05-15

    In this report, we use a dynamic AGE model to study the effects of the energy tax reform that took place in 2011 and is to be completed by 2015. We construct a counterfactual baseline which evaluates, how the economy would develop had the reform not been implemented. We find that the reform curbs domestic consumption and pushes domestic wages down compared to the baseline, improving the country's external balance. We also study the effects of the 2009 removal of a part of the employers' social security contributions, which the energy tax reform was intended to finance. The 2009 reform increased overall labour demand, resulting in higher wages and higher domestic demand, which had the opposite effects on external balance. (orig.)

  7. Measuring and Comparing Energy Flexibilities

    DEFF Research Database (Denmark)

    Valsomatzis, Emmanouil; Hose, Katja; Pedersen, Torben Bach

    2015-01-01

    Flexibility in energy supply and demand becomes more and more important with increasing Renewable Energy Sources (RES) production and the emergence of the Smart Grid. So-called prosumers, i.e., entities that produce and/or consume energy, can offer their inherent flexibilities through so......-called demand response and thus help stabilize the energy markets. Thus, prosumer flexibility becomes valuable and the ongoing Danish project TotalFlex [1] explores the use of prosumer flexibility in the energy market using the concept of a flex-offer [2], which captures energy flexibilities in time and...... induced by time and amount individually, and by their com- bination. To this end, we introduce several flexibility measures that take into account the combined effect of time and energy on flex-offer flexibility and discuss their respective pros and cons through a number of realistic examples....

  8. Comparative Studies of Traditional (Non-Energy Integration and Energy Integration of Catalytic Reforming Unit using Pinch Analysis

    Directory of Open Access Journals (Sweden)

    M. Alta

    2012-12-01

    Full Text Available Energy Integration of Catalytic Reforming Unit (CRU of Kaduna Refinery and petrochemicals Company Kaduna Nigeria was carried out using Pinch Technology. The pinch analysis was carried out using Maple. Optimum minimum approach temperature of 20 °C was used to determine the energy target. The pinch point temperature was found to be 278 °C. The utilities targets for the minimum approach temperature were found to be 72711839.47 kJ/hr and 87105834.43 kJ/hr for hot and cold utilities respectively. Pinch analysis as an energy integration technique was found to save more energy and utilities cost than the traditional energy technique. Key words: Pinch point, CRU, Energy Target, Maple

  9. Energy efficiency policies and measures

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This document makes a review of the energy efficiency and demand side management (DSM) policies and measures in European Union countries and Norway in 1999: institutional changes, measures and programmes, budget, taxation, existence of a national DSM programme, national budgets for DSM programmes, electricity pricing: energy/environment tax, national efficiency standards and regulation for new electrical appliances, implementation of Commission directives, efficiency requirements, labelling, fiscal and economic incentives. (J.S.)

  10. Energy deprivation dynamics and regulatory reforms in Europe: Evidence from household panel data

    International Nuclear Information System (INIS)

    Poggi, Ambra; Florio, Massimo

    2010-01-01

    The typical ingredients of energy reforms in the European Union (EU) in the 1990s were full or partial privatization, vertical disintegration and liberalization. This paper analyses the effects of energy reforms on the probability of households experiencing deprivation, defined as difficulty in paying the bills. We use two sets of micro-data. First, the European Community Household Panel (ECHP), a large EU survey, offers evidence on people who report having been unable to pay scheduled utility bills. We consider seven European countries: Denmark, Belgium, France, Ireland, Italy, the Netherlands and Spain, and eight ECHP waves (1994-2001), with around 28,000 observations. Second, we also use micro-data from the European Statistics on Income and Living Conditions survey (EU-SILC) 2004-2005, with around 84,000 observations. The countries included are Belgium, France, Ireland, Italy, Spain, Austria, Finland, Luxembourg, Norway and Sweden. As indicators of regulatory reforms in the same countries and years we use ECTR (formerly REGREF), a database provided by the OECD. In both samples we find evidence that privatization increases the probability of households experiencing deprivation. Vertical disintegration has a similar effect and also increases the persistence in the status of household deprivation. Liberalization has no statistically significant effect. We discuss possible interpretations of these findings.

  11. Hydrogen from biomass gas steam reforming for low temperature fuel cell: energy and exergy analysis

    Directory of Open Access Journals (Sweden)

    A. Sordi

    2009-03-01

    Full Text Available This work presents a method to analyze hydrogen production by biomass gasification, as well as electric power generation in small scale fuel cells. The proposed methodology is the thermodynamic modeling of a reaction system for the conversion of methane and carbon monoxide (steam reforming, as well as the energy balance of gaseous flow purification in PSA (Pressure Swing Adsorption is used with eight types of gasification gases in this study. The electric power is generated by electrochemical hydrogen conversion in fuel cell type PEMFC (Proton Exchange Membrane Fuel Cell. Energy and exergy analyses are applied to evaluate the performance of the system model. The simulation demonstrates that hydrogen production varies with the operation temperature of the reforming reactor and with the composition of the gas mixture. The maximum H2 mole fraction (0.6-0.64 mol.mol-1 and exergetic efficiency of 91- 92.5% for the reforming reactor are achieved when gas mixtures of higher quality such as: GGAS2, GGAS4 and GGAS5 are used. The use of those gas mixtures for electric power generation results in lower irreversibility and higher exergetic efficiency of 30-30.5%.

  12. The reform of the italian regionalism and the impact on the government of the energy

    International Nuclear Information System (INIS)

    Spagnolo, Marcella

    2006-01-01

    The actual distribution of powers about energy is more discussed after the reform of the art. 117 of the constitution. In front of a contradiction in terms, the government is been obliged to take some emergency solutions, that are witnessed by the reiterated petition to the urgent decree. It was a question of some measures justified, about the matter, from several points of view but they risked cracking seriously the relation between state and regions. The system of energy has naturally and objectively a national configuration and so people demand how the decentralization politics of the competencies has to be interpreted, that was introduced by the reform of title 5. of the constitution. The art. 117 of the Constitution implies the energy among the subjects of competing law, and let the State to determinate the basic principles, in order to ensure the basic homogeneity of the subject. The limits of such regional power are: 1) the limit of national interest (disappeared from the literal diction of the art. 117, but there are debates above its survival; 2) the basic principles role; 3) the normative settlement and the admissibility of 'accomodating' state detail norms in the subordinate matters to the competing legislative power. Even if in the Constitutional text does not exist any longer national interest just like a 'passe-par tout' to limit and coerce the regional interventions, this does not mean that national interest are disappeared: national interest has one of its substantial variability and only the State can be its interpreter, as only representative of the joint republican interest. The Consulta has recently asserted that if on one hand the Constitution has moved the centre of the legislative power in aid of the districts, on the other has strengthened the role and the importance of the basic principles; at least, it has done it for the subjects of competing law. In fact, someone confirmed that the principles may be deducible without an explicit

  13. Growth potential of energy sector reforms: new evidence on EU and Southeast European countries by exploring impact on electricity generation

    Directory of Open Access Journals (Sweden)

    Nela Vlahinić Lenz

    2015-12-01

    Full Text Available The aim of this research is to investigate the impact of energy sector reforms on electricity generation and thus economic growth in EU and Southeast European countries. The paper aims at clarifying whether the impact of energy sector reforms on generation efficiency differs among countries according to their level of development and regional characteristics. Our hypothesis is that the EU reform model is not appropriate for all Member States and Southeast European countries since it does not improve efficiency in electricity generation in all countries and therefore, it can hamper economic growth. For testing the defined hypothesis the panel regression model with fixed effects has been used. The research results show that unlike in the EU-15 (old Member States, energy sector reforms in the EU-12 (new Member States, and selected Southeast European countries (Energy Community contracting parties have no significant impact on electricity transmission and distribution losses. These evidences imply that the uniform EU reform model does not improve efficiency of electricity generation in less developed countries. On the contrary it can even hamper economic growth and therefore it cannot be appropriate for all Member States. The reason lies in the fact that successful reform model requires adequate level of institutional resources that are missing in most transition and post-transition countries.

  14. Forward energy measurement with CMS

    CERN Document Server

    Kheyn, Lev

    2016-01-01

    Energy flow is measured in the forward region of CMS at pseudorapidities up to 6.6 in pp interactions at 13 TeV with forward (HF) and very forward (CASTOR) calorimeters. The results are compared to model predictions. The CMS results at different center-of-mass energies are intercompared using pseudorapidity variable shifted by beam rapidity, thus studying applicability of hypothesis of limiting fragmentation.

  15. Gradual reforms and the emergence of energy market in China. Evidence from tests for convergence of energy prices

    International Nuclear Information System (INIS)

    Ma, Hengyun; Oxley, Les; Gibson, John

    2009-01-01

    This study investigates the emergence of energy markets by testing for convergence of energy prices with a new dataset on energy spot prices in 35 major cities in China. Both descriptive statistics and unit root are employed to test the convergence of energy prices for each of four fuel price series. The whole study period is divided into two sub-periods in order to reconcile the gradual energy reforms. The results show the steady improvement in energy market performance in China, especially during the second sub-period, which suggests that the market appears to be playing an increasing role in determining energy prices. While panel unit root tests show energy markets are integrated in China as a whole, city-by-city univariate unit root tests suggest that there are still many regional energy markets, probably because energy reserves (especially coal) vary widely across regions. Since China's energy economy is gradually moving towards market-oriented mechanisms, the existing literature may become obsolete soon. (author)

  16. A reform strategy of the energy sector of the 12 countries of North Africa and the Eastern Mediterranean

    International Nuclear Information System (INIS)

    Patlitzianas, Konstantinos D.; Doukas, Haris; Kagiannas, Argyris G.; Askounis, Dimitris Th.

    2006-01-01

    The development of an energy reform strategy based on the market economy so as to introduce competition in the market segments is of crucial importance for provision of a stable and favourable environment for energy investments. Reform strategies have begun developing in most of the 12 Mediterranean Countries of North Africa and the Eastern Mediterranean, especially in the context of the Euro-Mediterranean Free Trade Area. Even though energy sector reforms have been initiated, they are still at an early stage in most of these countries. The majority of energy utilities remain state owned, vertically integrated monopolies. Few of these countries have established energy regulators, and where they have, these institutions have many difficulties in effective development. In addition, competition is virtually absent from the sector, and private participation has been confined to independent power plants, which tend to be introduced into unreformed sectors. The aim of this paper is to propose energy reform strategies for the reform of the sector by 2010 in terms of the development of the regional oil, gas and electricity sectors in these countries

  17. Energy consumption restricted productivity re-estimates and industrial sustainability analysis in post-reform China

    International Nuclear Information System (INIS)

    Chen, Shiyi; Santos-Paulino, Amelia U.

    2013-01-01

    This paper investigates the impact of energy on China's industrial sustainability by using a novel approach to estimate real total factor productivity. The growth accounting indicates that the substantial industrial reforms in China have led to productivity growth. Energy and capital are also important factors driving China's industrial growth. Productivity growth in China's industry is mostly attributable to the high-tech light industrial sectors. - Highlights: ► Productivity has become the most important growth engine in majority of sectors. ► Energy and capital are also important factors promoting China's industrial growth. ► The productivity improvement is more attributable to high-tech light industry. ► The heavy industry performs worse than the light one in terms of productivity

  18. Measuring and monitoring energy poverty

    International Nuclear Information System (INIS)

    Pachauri, Shonali; Spreng, Daniel

    2011-01-01

    This article undertakes a review of alternative measures and indicators of energy poverty targeted to specific audiences and for particular purposes. At the national and international scales there have been some efforts for constructing measures of energy poverty. However, much more needs to be done to develop an internationally consistent measurement framework and to put in place data collection systems that will enable regular reporting. At the programme and project level, indicator systems by necessity need to be designed for specific purposes. Nevertheless, the article proposes that in many instances it is desirable to widen the scope of metrics used for designing and evaluating policies and programmes. In the past, monitoring and evaluation indicators have focused largely on outputs, service delivery or dissemination. Central to the recommendations laid out in the paper is the call for widening the focus of evaluation and necessity to design indicators that adequately assess the needs of beneficiaries and describe the living conditions of families and communities, who are targeted by such programmes and initiatives. - Highlights: ► Consistent measurement frameworks and regular data collection systems on energy poverty are needed. ► Metrics used for designing and evaluating energy access programmes should be widened. ► Indicators that adequately assess needs and describe living conditions of targeted beneficiaries are required.

  19. China's economic reform and industry sector energy requirement: A forecast to 2015

    International Nuclear Information System (INIS)

    Gu, A.Y.

    1997-01-01

    With its GDP growing at an average rate of 9.8% for the last seventeen years, China has the world's fastest growing economy. This rapid pace of growth and industrialization has caused economic strain because fuel production cannot keep pace with demand, If China allows this situation to continue, significant oil imports will be necessary. In 1993, the industrial sector contributed 56% to China's GDP and consumed 61% of the total final energy. The industrial sector will remain the largest energy consumer in China well into the next century. According to China's Ninth Five-Year Plan (1996--2000), China will strengthen its ability to develop new products and will use technological advancement to promote industrial development. The Plan calls for special attention in four major areas: microelectronics technology, digital technology, software technology, and network technology. Given China's emphasis on developing light industries and on improving industrial sector energy efficiency, it is important to study the future energy demand of the industrial sector. Two scenarios for future energy requirements are studied through the year 2015: a Business As Usual (BASU) scenario and an Energy Efficient (EE) scenario. The study evaluates China's current economic reform policies and energy efficiency policies. The results of this evaluation are used to assign appropriate growth rates to industrial GDP and the industrial energy intensity for both scenarios. Results from the two scenarios are compared and analyzed

  20. Estonia expresses misgivings over EU energy reform measures

    Index Scriptorium Estoniae

    2008-01-01

    Eesti valitsuse arvates ei arvesta Brüsseli kliimamuutuste pidurdamise meetmed Eesti energeetika omapära. Kavandatavas energeetika- ja kliimapaketis on ettepanek energeetikaettevõtete saastekvoodist ilmajätmine

  1. Competitiveness, innovation and democracy. Space for clean energy within electricity reforms

    Energy Technology Data Exchange (ETDEWEB)

    Alfaro, L.V.

    2002-07-01

    This thesis presents an exploratory analysis about the institutional factors affecting the reforms of the eletricity sector in developing countries. In particular the thesis researches the process of technology selection and the factors and incentives affecting the choice between clean and unclean technologies. The co-evolutionary character of technological and institutional aspects are studied within a focus on the Costa Rican experience. Empirical evidence from the clustering process developed in Costa Rica is examined and an analytical framework is developed for a clearer understanding of the reforms that constrain the use of clean energy. The research presented here has shown the co-evolutionary character of technological and institutional selection processes, and how both influence the particular path where technology selection is defined. It has been also found that the specific institutional framework in developing countries that supports the governance mechanisms is a crucial factor when explaining technological specialisation as well as the performance of the sector, at the national level. Among the main factors within the local institutional framework, it has been found that ownership structure and market architecture as well as the governmental regulatory framework are essential elements explaining the governance structure, and to some extent, technology selection in the electricity sector. Those factors are the rules of the game by which producers define the specific technology to be implemented. (au)

  2. Energy and CO2 emissions performance in China's regional economies: Do market-oriented reforms matter?

    International Nuclear Information System (INIS)

    Lin, Boqiang; Du, Kerui

    2015-01-01

    This paper employs a newly developed non-radial directional distance function to evaluate China's regional energy and CO 2 emission performance for the period 1997–2009. Moreover, we analyze the impact of China's market-oriented reform on China's regional energy and carbon efficiency. The main findings are as follows. First, most of China's regions did not perform efficiently in energy use and CO 2 emissions. Provinces in the east area generally performed better than those in the central and west areas. By contrast, provinces in the west area generally evidenced the lowest efficiency. Second, Market-oriented reforms, especially the promotion of factor market, were found to have positive effect on the efficiency of energy use and CO 2 emissions. Third, the share of coal in the total energy consumption and the expansion of the industrial sector were found to be negatively correlated with China's regional energy and CO 2 emissions performance. Based on the empirical findings, we provide policy suggestions for enhancing energy and carbon efficiency in China. - Highlights: • A newly developed NDDF are applied to evaluate China's energy and carbon performance. • Most of China's regions did not perform efficiently in energy use and CO 2 emissions. • Market-oriented reforms contributed to improving China's energy and carbon efficiency

  3. Including health insurance in poverty measurement: The impact of Massachusetts health reform on poverty.

    Science.gov (United States)

    Korenman, Sanders D; Remler, Dahlia K

    2016-12-01

    We develop and implement what we believe is the first conceptually valid health-inclusive poverty measure (HIPM) - a measure that includes health care or insurance in the poverty needs threshold and health insurance benefits in family resources - and we discuss its limitations. Building on the Census Bureau's Supplemental Poverty Measure, we construct a pilot HIPM for the under-65 population under ACA-like health reform in Massachusetts. This pilot demonstrates the practicality, face validity and value of a HIPM. Results suggest that public health insurance benefits and premium subsidies accounted for a substantial, one-third reduction in the health inclusive poverty rate. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Reforms in the Slovakia 2005. Evaluation of economical and social measures (The HESO Project)

    International Nuclear Information System (INIS)

    Zachar, D.

    2006-07-01

    The Slovak Republic faces the task to secure conditions for a long-term economic growth. A crucial precondition for an efficient implementation of economic and social measures is the knowledge of the status quo and of the impacts on the economy and the society as a whole, to be expected from the relevant measures and it is important to focus on short-term as well as on long-term goals. For a successful implementation of many economic and social measures citizens' acceptance is needed. Therefore, the non-governmental, non-profit organisation Institute for Economic and Social Reforms INEKO aims to make the public more familiar with the nature of economic and social processes in the country and abroad, and to eliminate, through economic research and educational activities, hindrances to a long-term positive development of the Slovak economy and society. (authors)

  5. Measuring energy poverty in Greece

    International Nuclear Information System (INIS)

    Papada, Lefkothea; Kaliampakos, Dimitris

    2016-01-01

    A comprehensive research in the field of energy poverty is undertaken in this paper, in an attempt to highlight the great vulnerability of Greek households on energy poverty, in the middle of a severe economic crisis. Till now, Greek energy policy has been considered insufficient to tackle energy poverty issues, as focusing mainly on short-term rather than permanent solutions. A primary survey has been conducted, recording objective data of energy expenses as well as subjective perceptions about housing conditions. The findings showed that, under the objective expenditure-based method, 58% of Greek households are energy poor. Among households under the poverty threshold, the energy poverty rate exceeds 90%. Existing and new subjective indicators shed light on other aspects of energy poverty, such as the level of thermal comfort at home, damp problems detected, restriction of other essential needs in order to manage energy payments, etc. Some interesting conclusions are also drawn by exploring the relationship between various indicators. It appears that households considered energy poor are not identical when examined by objective and subjective indicators. However, different indicators complement each other by capturing different aspects of the problem and provide a broader overview of the issue. - Highlights: •58% of Greek households are energy poor. •75% of Greek households have reduced other essentials in favor of energy needs. •Combination of objective and subjective indicators captures better energy poverty. •Greek energy policy has failed to tackle energy poverty issues.

  6. Measure for Measure: Urban Water and Energy

    Science.gov (United States)

    Chini, C.; Stillwell, A. S.

    2017-12-01

    Urban environments in the United States account for a majority of the population and, as such, require large volumes of treated drinking water supply and wastewater removal, both of which need energy. Despite the large share of water that urban environments demand, there is limited accounting of these water resources outside of the city itself. In this study, we provide and analyze a database of drinking water and wastewater utility flows and energy that comprise anthropogenic fluxes of water through the urban environment. We present statistical analyses of the database at an annual, spatial, and intra-annual scale. The average daily per person water flux is estimated as 563 liters of drinking water and 496 liters of wastewater, requiring 340 kWh/1000 m3 and 430 kWh/1000 m3 of energy, respectively, to treat these resources. This energy demand accounts for 1% of the total annual electricity production of the United States. Additionally, the water and embedded energy loss associated with non-revenue water (estimated at 15.8% annually) accounts for 9.1 km3of water and 3600 GWh, enough electricity to power 300,000 U.S. households annually. Through the analysis and benchmarking of the current state of urban water fluxes, we propose the term `blue city,' which promotes urban sustainability and conservation policy focusing on water resources. As the nation's water resources become scarcer and more unpredictable, it is essential to include water resources in urban sustainability planning and continue data collection of these vital resources.

  7. Avoided cost estimation and post-reform funding allocation for California's energy efficiency programs

    International Nuclear Information System (INIS)

    Baskette, C.; Horii, B.; Kollman, E.; Price, S.

    2006-01-01

    This paper summarizes the first comprehensive estimation of California's electricity avoided costs since the state reformed its electricity market. It describes avoided cost estimates that vary by time and location, thus facilitating targeted design, funding, and marketing of demand-side management (DSM) and energy efficiency (EE) programs that could not have occurred under the previous methodology of system average cost estimation. The approach, data, and results reflect two important market structure changes: (a) wholesale spot and forward markets now supply electricity commodities to load serving entities; and (b) the evolution of an emissions market that internalizes and prices some of the externalities of electricity generation. The paper also introduces the multiplier effect of a price reduction due to DSM/EE implementation on electricity bills of all consumers. It affirms that area- and time-specific avoided cost estimates can improve the allocation of the state's public funding for DSM/EE programs, a finding that could benefit other parts of North America (e.g. Ontario and New York), which have undergone electricity deregulation

  8. Economic reforms and change in the energy sector: the case of Ecuador

    International Nuclear Information System (INIS)

    Dahik, Alberto.

    1993-01-01

    The failure of both democracies and revolutions in Latin America is due to the fact that the State has been trusted with political, economic and social organization, instead of relying on the motivations and capabilities of intermediate associations and the individual members of society. Therefore, the process of change is not just a matter of national decision; it is something that must, and will, take place. Ecuador understands perfectly well the need for reform. Major laws have already been enacted, and a bill for modernization of the State is currently under consideration by congress. The concept of modernization and, therefore, change does not merely imply new laws, simplified procedures or easier operations; it basically means allowing the creative forces of individuals, enterprises and intermediate associations to play a more influential role. As in other Latin American countries, in Ecuador there can be no real modernization, no real change in society without a major revolution in energy and telecommunications. Thus, two important laws have been drafted to demonopolize petroleum and electric power operations and open them up both to national and foreign private sector participation

  9. Mexico´s Energy Reform : an analysis of the market, new policy and integration of renewable energy for economic and sustainable development

    OpenAIRE

    Favela, Alfredo Rojas

    2016-01-01

    In the framework of the approved Energy Reform in 2013, Mexico puts an end to seven decades of centralized control of the energy and electricity markets within the government through the State governed companies CFE (Federal Electricity Commission) and PEMEX (Mexican Oil). During the largest part of last century and the beginning of the current, the Mexican government relied heavily on the revenues generated by PEMEX through the sale of oil to foreign countries and tax revenues...

  10. Rasch Validation of a Measure of Reform-Oriented Science Teaching Practices

    Science.gov (United States)

    You, Hye Sun

    2016-06-01

    Growing evidence from recent curriculum documents and previous research suggests that reform-oriented science teaching practices promote students' conceptual understanding, levels of achievement, and motivation to learn, especially when students are actively engaged in constructing their ideas through scientific inquiries. However, it is difficult to identify to what extent science teachers engage students in reform-oriented teaching practices (RTPs) in their science classrooms. In order to exactly diagnose the current status of science teachers' implementation of the RTPs, a valid and reliable instrument tool is needed. The principles of validity and reliability are fundamental cornerstones in developing a robust measurement tool. As such, this study was motivated by the desire to point out the limitations of the existing statistical and psychometric analyses and to further examine the validation of the RTP survey instrument. This paper thus aims at calibrating the items of the RTPs for science teachers using the Rasch model. The survey instrument scale was adapted from the 2012 National Survey of Science and Mathematics Education (NSSME) data. A total of 3701 science teachers from 1403 schools from across the USA participated in the NSSME survey. After calibrating the RTP items and persons on the same scale, the RTP instrument well represented the population of US science teachers. Model-data fit determined by Infit and Outfit statistics was within an appropriate range (0.5-1.5), supporting the unidimensional structure of the RTPs. The ordered category thresholds and the probability of the thresholds showed that the five-point rating scale functioned well. The results of this study support the use of the RTP measure from the 2012 NSSME in assessing usage of RTPs.

  11. Measuring energy efficiency: Is energy intensity a good evidence base?

    International Nuclear Information System (INIS)

    Proskuryakova, L.; Kovalev, A.

    2015-01-01

    Highlights: • Energy intensity measure reflects consumption, not energy efficiency. • Thermodynamic indicators should describe energy efficiency at all levels. • These indicators should have no reference to economic or financial parameters. • A set of energy efficiency indicators should satisfy several basic principles. • There are trade-offs between energy efficiency, power and costs. - Abstract: There is a widespread assumption in energy statistics and econometrics that energy intensity and energy efficiency are equivalent measures of energy performance of economies. The paper points to the discrepancy between the engineering concept of energy efficiency and the energy intensity as it is understood in macroeconomic statistics. This double discrepancy concerns definitions (while engineering concept of energy efficiency is based on the thermodynamic definition, energy intensity includes economic measures) and use. With regard to the latter, the authors conclude that energy intensity can only provide indirect and delayed evidence of technological and engineering energy efficiency of energy conversion processes, which entails shortcomings for management and policymaking. Therefore, we suggest to stop considering subsectoral, sectoral and other levels of energy intensities as aggregates of lower-level energy efficiency. It is suggested that the insufficiency of energy intensity indicators can be compensated with the introduction of thermodynamic indicators describing energy efficiency at the physical, technological, enterprise, sub-sector, sectoral and national levels without references to any economic or financial parameters. Structured statistical data on thermodynamic efficiency is offered as a better option for identifying break-through technologies and technological bottle-necks that constrain efficiency advancements. It is also suggested that macro-level thermodynamic indicators should be based on the thermodynamic first law efficiency and the energy

  12. Energy utility reform in eastern Canada: electric monopolies still in the dark ages. Can Ontario`s gas reforms light the way?

    Energy Technology Data Exchange (ETDEWEB)

    Adams, T. [Energy Probe, Toronto, ON (Canada)

    1997-08-01

    The electric and gas utility reform in eastern Canada jurisdictions, specifically in New Brunswick, Quebec and Ontario were reviewed. Progress towards a more competition-oriented operation was the principal theme. With regard to New Brunswick, the financial and operational crisis of NB Power, the provincially owned utility, was described. It was argued that in keeping with the trend towards privatization it would be preferable to privatize NB Power rather than allowing it to become an even larger monopoly by taking control of Sable Island gas distribution. In Quebec, two government-owned utilities, Hydro-Quebec and Gaz Metropolitain, were consolidated to strengthen the government`s monopoly. In view of the lack of competition and unequal access to meet the criteria of the Federal Energy Regulatory Commission (FERC), Hydro-Quebec`s main challenge is to retain access to the US market. The US FERC order is a major barrier to Hydro-Quebec. In the Ontario portion of the review, the financial crisis facing Ontario Hydro received extensive coverage. Ontario Hydro was accused of protecting its monopolistic power to control provincial power users, and to prevent independent producers to do business in the province. By contrast, in the Ontario natural gas sector competition is growing, led by initiatives of the Ontario Energy Board and supported by all major gas utilities. Energy Probe is advocating an Independent System Operator (ISO) for the gas system, a concept universally accepted as necessary in competition-oriented integrated electric power systems.

  13. Measures for energy efficiency improvement of buildings

    Directory of Open Access Journals (Sweden)

    Vukadinović Ana V.

    2015-01-01

    Full Text Available The increase in energy consumption in buildings causes the need to propose energy efficiency improvement measures. Urban planning in accordance with micro location conditions can lead to energy consumption reduction in buildings through the passive solar design. While satisfying the thermal comfort to the user space purpose, energy efficiency can be achieved by optimizing the architectural and construction parameters such as shape of the building, envelope structure and the percentage of glazing. The improvement of the proposed measures, including the use of renewable energy sources, can meet requirements of Directive 2010/31 / EU of 'nearly zero energy buildings'.

  14. The Thermal Measurement of Energy

    Science.gov (United States)

    Griffiths, E. H.

    2014-08-01

    1. Introductory remarks; 2. Relation between potential and kinetic energy; 3. Table of values obtained by different observers; 4. Distinction between capacity for heat and specific heat of water; Appendix I. The thermal unit; Appendix II. Approximate methods of determining the mechanical equivalent; Appendix III. Copy of resolutions passed by the Electrical Standards Committee of the British Association in 1896.

  15. Low-energy neutrino measurements

    Indian Academy of Sciences (India)

    2012-10-05

    Oct 5, 2012 ... Abstract. Low-energy solar neutrino detection plays a fundamental role in understanding both ... describes the thermonuclear processes in the core of the Sun and foresees the emission of neutrinos from ..... neutrino–electron elastic scattering and does not benefit from the handle of the delayed coincidence ...

  16. Low-energy neutrino measurements

    Indian Academy of Sciences (India)

    Low-energy solar neutrino detection plays a fundamental role in understanding both solar astrophysics and particle physics. After introducing the open questions on both fields, we review here the major results of the last two years and expectations for the near future from Borexino, Super-Kamiokande, SNO and KamLAND ...

  17. Labor and energy impacts of energy-conservation measures

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Three papers are presented discussing the labor and energy impacts of energy-conservation measures, namely: Generation of the Industry/Occupation Wage Matrix and Related Matters, by Carole Green; Job Shifts from Energy Conservation (Salary Distribution Effects), by Robert A. Herendeen; and Energy and Labor Implication of Improving Thermal Integrity of New Houses, by John Joseph Nangle. A separate abstract was prepared for each paper.

  18. Measuring improvement in knowledge of drug policy reforms following a police education program in Tijuana, Mexico

    Directory of Open Access Journals (Sweden)

    J. Arredondo

    2017-11-01

    Full Text Available Abstract Background Mexico’s 2009 “narcomenudeo reform” decriminalized small amounts of drugs, shifting some drug law enforcement to the states and mandating drug treatment diversion instead of incarceration. Data from Tijuana suggested limited implementation of this harm reduction-oriented policy. We studied whether a police education program (PEP improved officers’ drug and syringe policy knowledge, and aimed to identify participant characteristics associated with improvement of drug policy knowledge. Methods Pre- and post-training surveys were self-administered by municipal police officers to measure legal knowledge. Training impact was assessed through matched paired nominal data using McNemar’s tests. Multivariable logistic regression was used to identify predictors of improved legal knowledge, as measured by officers’ ability to identify conceptual legal provisions related to syringe possession and thresholds of drugs covered under the reform. Results Of 1750 respondents comparing pre- versus post training, officers reported significant improvement (p < 0.001 in their technical understanding of syringe possession (56 to 91% and drug amounts decriminalized, including marijuana (9 to 52%, heroin (8 to 71%, and methamphetamine (7 to 70%. The training was associated with even greater success in improving conceptual legal knowledge for syringe possession (67 to 96% (p < 0.001, marijuana (16 to 91%, heroin (11 to 91%, and methamphetamine (11 to 89%. In multivariable modeling, those with at least a high school education were more likely to exhibit improvement of conceptual legal knowledge of syringe possession (adjusted odds ratio [aOR] 2.6, 95% CI 1.4–3.2 and decriminalization for heroin (aOR 2.7, 95% CI 1.3–4.3, methamphetamine (aOR 2.2, 95% CI 1.4–3.2, and marijuana (aOR 2.5, 95% CI 1.6–4. Conclusions Drug policy reform is often necessary, but not sufficient to achieve public health goals because of gaps in translating

  19. Low-energy neutrino measurements

    Indian Academy of Sciences (India)

    2012-10-05

    Oct 5, 2012 ... However, the light takes ∼105 yr to reach us, while neutrinos escape from the solar matter undisturbed. Consequently, a precision measurement of ... neutrinos is therefore a major goal with important cosmological implications. ..... In addition, the water plants have been modified for a better control of.

  20. Neutron energy measurement for practical applications

    Science.gov (United States)

    Roshan, M. V.; Sadeghi, H.; Ghasabian, M.; Mazandarani, A.

    2018-03-01

    Industrial demand for neutrons constrains careful energy measurements. Elastic scattering of monoenergetic α -particles from neutron collision enables neutron energy measurement by calculating the amount of deviation from the position where collision takes place. The neutron numbers with specific energy is obtained by counting the number of α -particles in the corresponding location on the charged particle detector. Monte Carlo simulation and COMSOL Multiphysics5.2 are used to account for one-to-one collision of neutrons with α -particles.

  1. Measuring Small Business Participation in Air Force Contracting: The Impact of Acquisition Reform

    National Research Council Canada - National Science Library

    Pike, William

    2004-01-01

    .... Reports on the federal government as a whole suggest that the acquisition reforms have had a negative effect on small business participation, with a declining number of small businesses receiving contract awards...

  2. China's Health Reform Update.

    Science.gov (United States)

    Liu, Gordon G; Vortherms, Samantha A; Hong, Xuezhi

    2017-03-20

    China experienced both economic and epistemological transitions within the past few decades, greatly increasing demand for accessible and affordable health care. These shifts put significant pressure on the existing outdated, highly centralized bureaucratic system. Adjusting to growing demands, the government has pursued a new round of health reforms since the late 2000s; the main goals are to reform health care financing, essential drug policies, and public hospitals. Health care financing reform led to universal basic medical insurance, whereas the public hospital reform required more complex measures ranging from changes in regulatory, operational, and service delivery settings to personnel management. This article reviews these major policy changes and the literature-based evidence of the effects of reforms on cost, access, and quality of care. It then highlights the outlook for future reforms. We argue that a better understanding of the unintended consequences of reform policies and of how practitioners' and patients' interests can be better aligned is essential for reforms to succeed.

  3. Environmental consequences of electricity sector reforms

    International Nuclear Information System (INIS)

    Wohlgemuth, N.

    1999-01-01

    Worldwide, the electricity industry is in the process of undergoing fundamental transitions. The reform process typically involves one or more of the following changes: commercialisation, privatisation, unbundling/restructuring and introduction of competition. The environmental impacts of these changes pull in different directions. There is concern that restructured electricity markets may not always incorporate adequately the environmental impacts of electricity resource development and consumption decisions. However, the electricity sector reform process also offers an opportunity to promote positive environmental changes: because the sector is already in flux, it may be easier to address environmental issues. The paper gives an overview of power sector reform in six countries where reforms have already been implemented, and concludes that reform measures will have to be accompanied by competitively neutral regulations in order to stimulate investment in environmentally sound technologies, including renewable and energy efficient technologies. (author)

  4. Elements for the development of public policies in the residential sector of Mexico based in the Energy Reform and the Energy Transition law

    International Nuclear Information System (INIS)

    Rosas-Flores, Jorge Alberto

    2017-01-01

    Mexico has entered in an important dynamic of structural changes in the energy area, proof of this, it is the Energy Reform 2013 and the Energy Transition Law published the last December 24th, 2015, thus it is important to carry out studies of the impacts of future politics in the consumption of the population, so this study estimate an energy demand system using microdata collected from 97,817 households in a National Households Income and Expenditure Survey (ENIGH acronyms in Spanish, Encuesta Nacional de Ingresos y Gastos de los Hogares) in the 20-years period from 1994 to 2014. The magnitudes of all the fuels are smaller than one indicating that electricity, LPG, gasoline and public transport are normal goods, while LPG is the most inelastic energy source. The geographic factor shows that households in the north of Mexico tend to consume more gasoline, whereas in the south of the country, the lowest share of LPG expenditure is reported. The rigorous evaluation of energy demanded in households will help policy makers to put forward more efficient reforms. - Highlights: • The electricity, LPG, gasoline and public transport are normal goods. • LPG is the most inelastic energy source. • The north of Mexico tend to consume more gasoline. • Evidence of complement between personal vehicle and public transport.

  5. Experimental measurement of energy harvesting with backpack

    Science.gov (United States)

    Pavelkova, Radka; Vala, David; Suranek, Pavel; Mahdal, Miroslav

    2017-08-01

    This article deals with the energy harvesting systems, especially the energy harvesting backpack, which appears as a convenient means for energy harvesting for mobile sensors power. Before starting the experiment, it was necessary to verify whether this energy will be sufficient to get acquainted with the human kinematics and analyze problematics itself. For this purpose there was used motion capture technology from Xsens. Measured data on the position of a particle moving man and back when walking, these data were then used for experimental realization of energy harvesting backpack and as input data to the simulation in Simulink, which brought us a comparison between theoretical assumptions and practical implementation. When measuring characteristics of energy harvesting system we have a problem with measurements on backpack solved when redoing of the hydraulic cylinder as a source of a suitable movement corresponding to the amplitude and frequency of human walk.

  6. Energy and energy width measurement in the FNAL antiproton accumulator

    International Nuclear Information System (INIS)

    Church, M.; Hsueh, S.; Rapidis, P.; Werkema, S.

    1991-10-01

    The Fermilab Antiproton Accumulator has recently been used to produce Charmonium resonances (charm quark, anti-charm quark bound states) in proton-antiproton annihilations using an internal H 2 gas jet target. A measurement of the resonance mass and width may be obtained from a precise knowledge of the antiproton beam energy and energy spread. The beam energy is measured to an accuracy of 1 part in 10 4 in the range 6.3 Gev to 4.1 Gev by measuring the orbit length and revolution frequency of the beam. The beam momentum spread is measured to an accuracy of 10% by measuring the beam frequency spread and the parameter η = (P beam /F rev )·(dF rev /dP beam ). These two measurement techniques are described in this report

  7. Energy and energy width measurement in the FNAL antiproton accumulator

    Energy Technology Data Exchange (ETDEWEB)

    Church, M.; Hsueh, S.; Rapidis, P.; Werkema, S.

    1991-10-01

    The Fermilab Antiproton Accumulator has recently been used to produce Charmonium resonances (charm quark, anti-charm quark bound states) in proton-antiproton annihilations using an internal H{sub 2} gas jet target. A measurement of the resonance mass and width may be obtained from a precise knowledge of the antiproton beam energy and energy spread. The beam energy is measured to an accuracy of 1 part in 10{sup 4} in the range 6.3 Gev to 4.1 Gev by measuring the orbit length and revolution frequency of the beam. The beam momentum spread is measured to an accuracy of 10% by measuring the beam frequency spread and the parameter {eta} = (P{sub beam}/F{sub rev}){center_dot}(dF{sub rev}/dP{sub beam}). These two measurement techniques are described in this report.

  8. The Oil Climax: Can Nigeria’s fuel subsidy reforms propel energy transitions?

    NARCIS (Netherlands)

    Osunmuyiwa, Olufolahan; Kalfagianni, Agni

    Abstract Recent studies in the field of political science and environmental resource governance suggest that oil-exporting economies have begun to implement fuel subsidy reforms. However, while most studies on this issue focus largely on the broader environmental and economic consequences of fuel

  9. Three methods to measure RH bond energies

    Energy Technology Data Exchange (ETDEWEB)

    Berkowitz, J. [Argonne National Lab., IL (United States); Ellison, G.B. [Univ. of Colorado, Boulder, CO (United States). Dept. of Chemistry and Biochemistry; Gutman, D. [Catholic Univ. of America, Washington, DC (United States). Dept. of Chemistry

    1993-03-21

    In this paper the authors compare and contrast three powerful methods for experimentally measuring bond energies in polyatomic molecules. The methods are: radical kinetics; gas phase acidity cycles; and photoionization mass spectroscopy. The knowledge of the values of bond energies are a basic piece of information to a chemist. Chemical reactions involve the making and breaking of chemical bonds. It has been shown that comparable bonds in polyatomic molecules, compared to the same bonds in radicals, can be significantly different. These bond energies can be measured in terms of bond dissociation energies.

  10. Three methods to measure RH bond energies

    International Nuclear Information System (INIS)

    Berkowitz, J.; Ellison, G.B.; Gutman, D.

    1993-01-01

    In this paper the authors compare and contrast three powerful methods for experimentally measuring bond energies in polyatomic molecules. The methods are: radical kinetics; gas phase acidity cycles; and photoionization mass spectroscopy. The knowledge of the values of bond energies are a basic piece of information to a chemist. Chemical reactions involve the making and breaking of chemical bonds. It has been shown that comparable bonds in polyatomic molecules, compared to the same bonds in radicals, can be significantly different. These bond energies can be measured in terms of bond dissociation energies

  11. Gas-to-liquids synthetic fuels for use in fuel cells : reformability, energy density, and infrastructure compatibility.

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, S.; Kopasz, J. P.; Russell, B. J.; Tomlinson, H. L.

    1999-09-08

    The fuel cell has many potential applications, from power sources for electric hybrid vehicles to small power plants for commercial buildings. The choice of fuel will be critical to the pace of its commercialization. This paper reviews the various liquid fuels being considered as an alternative to direct hydrogen gas for the fuel cell application, presents calculations of the hydrogen and carbon dioxide yields from autothermal reforming of candidate liquid fuels, and reports the product gas composition measured from the autothermal reforming of a synthetic fuel in a micro-reactor. The hydrogen yield for a synthetic paraffin fuel produced by a cobalt-based Fischer-Tropsch process was found to be similar to that of retail gasoline. The advantages of the synthetic fuel are that it contains no contaminants that would poison the fuel cell catalyst, is relatively benign to the environment, and could be transported in the existing fuel distribution system.

  12. Energy efficiency measurement in industrial processes

    International Nuclear Information System (INIS)

    Giacone, E.; Mancò, S.

    2012-01-01

    Although the meaning of energy efficiency is clear, different definitions exist and important issues relating to its implementation still need to be addressed. It is now recognised that complicating factors – such as complex industrial sites and energy flows, multiple products and fuels, and the influence of production rate on energy efficiency – render it necessary to adopt a structured framework to define and measure energy efficiency more precisely. In this paper, a methodology is proposed to build such a framework. The whole energy system of a site is represented using a single matrix equation, which expresses the relationship between imported energies and energy drivers. The elements of the matrix are the specific energy consumptions of each single process. Mathematical process modelling, through statistical analysis of energy consumption data, is used to quantify the specific energy consumption as a function of the output. The results of this structured approach are relevant for energy benchmarking, budgeting and targeting purposes. Furthermore, this approach is suitable for implementation in an energy management system standard (e.g. EN 16001, ISO 50001) or LCA standard (e.g. ISO 14044). Glass and cast iron melting processes are presented in order to illustrate the application of the method. -- Highlights: ► A structured framework for energy efficiency in industrial processes is proposed. ► Two energy efficiency indicators are revised to take into account a variable output. ► The whole energy system of a factory can be represented by a single matrix equation. ► Mathematical modelling is used to characterise the energy consumption of a process. ► The results are relevant for energy benchmarking, budgeting and energy targeting.

  13. Tales of two islands – Lessons for EU energy policy from electricity market reforms in Britain and Ireland

    International Nuclear Information System (INIS)

    Newbery, David

    2017-01-01

    Britain considers the energy-only EU Target Electricity Model (TEM) wanting in delivering the trilemma of reliability, sustainability and affordability and argues that a capacity auction with long-term contracts for new entrants is the least-cost solution compared to relying on expectations of future prices to deliver adequate generation and demand side response. The Energy Union argues against feed-in tariffs (FiTs) for renewables, pressing for premium FiTs (pFiTs), just as GB has abandoned PFiTs in favour of FiTs. This paper draws on the GB experience of Electricity Market Reform before and after the 2015 change of government, to highlight promising resolutions of the energy trilemma, and the problems that have arisen between the diagnosis of the problem and the delivery of solutions. It sets out the theory and practice of delivering capacity, energy and quality of supply, gives a brief history of GB electricity from the CEGB to its current unbundled, liberalized and privatized structure. That sheds light on the trilemma problem and discusses possible solutions. The island of Ireland Single Electricity Market reforms illustrate the problem and possible answer of how best to deliver quality of service with high intermittency. - Highlights: • The UK has introduced capacity payments and feed-in tariffs for renewables. • This contrasts with the energy-only target model and the Energy Union vision. • Transmission and distribution charges are critical in capacity auctions. • New flexibility services are needed for massive renewables penetration. • Britain and Ireland provide relevant evidence on addressing the energy trilemma.

  14. Procedure to Measure Indoor Lighting Energy Performance

    Energy Technology Data Exchange (ETDEWEB)

    Deru, M.; Blair, N.; Torcellini, P.

    2005-10-01

    This document provides standard definitions of performance metrics and methods to determine them for the energy performance of building interior lighting systems. It can be used for existing buildings and for proposed buildings. The primary users for whom these documents are intended are building energy analysts and technicians who design, install, and operate data acquisition systems, and who analyze and report building energy performance data. Typical results from the use of this procedure are the monthly and annual energy used for lighting, energy savings from occupancy or daylighting controls, and the percent of the total building energy use that is used by the lighting system. The document is not specifically intended for retrofit applications. However, it does complement Measurement and Verification protocols that do not provide detailed performance metrics or measurement procedures.

  15. Automatic energy expenditure measurement for health science

    NARCIS (Netherlands)

    Catal, Cagatay; Akbulut, Akhan

    2018-01-01

    Background and objective: It is crucial to predict the human energy expenditure in any sports activity and health science application accurately to investigate the impact of the activity. However, measurement of the real energy expenditure is not a trivial task and involves complex steps. The

  16. Neutron energy response measurement of scintillation detectors

    International Nuclear Information System (INIS)

    Yang Hongqiong; Peng Taiping; Yang Jianlun; Tang Zhengyuan; Yang Gaozhao; Li Linbo; Hu Mengchun; Wang Zhentong; Zhang Jianhua; Li Zhongbao; Wang Lizong

    2004-01-01

    Neutron sensitivities of detectors composed of plastic scintillator ST401, ST1422, ST1423 and phyotomultiplier tube in primary energy range of fission neutron are calibrated by direct current. The energy response curve of the detectors is obtained in this experiment. The experimental result has been compared with the theoretical calculation and they are in agreement within measuring uncertainty. (authors)

  17. Neutron energy measurement for practical applications

    Indian Academy of Sciences (India)

    M V Roshan

    2018-02-07

    Feb 7, 2018 ... monoenergetic α-particles from neutron collision enables neutron energy measurement by calculating the amount of deviation from the position ... nuclear fusion, and is of interest in the theory of light ion interactions [1]. Spin–orbit ... neutron modular detector to detect neutron energies. In our last paper [6], ...

  18. BMD measurements of the spine derived from sagittal reformations of contrast-enhanced MDCT without dedicated software

    Energy Technology Data Exchange (ETDEWEB)

    Baum, Thomas, E-mail: thbaum@gmx.de [Institut fuer Roentgendiagnostik, Klinikum rechts der Isar, Technische Universitaet Muenchen, Ismaninger Str. 22, 81675 Muenchen (Germany); Mueller, Dirk, E-mail: dirk.mueller@roe.med.tum.de [Institut fuer Roentgendiagnostik, Klinikum rechts der Isar, Technische Universitaet Muenchen, Ismaninger Str. 22, 81675 Muenchen (Germany); Dobritz, Martin, E-mail: dobritz@roe.med.tum.de [Institut fuer Roentgendiagnostik, Klinikum rechts der Isar, Technische Universitaet Muenchen, Ismaninger Str. 22, 81675 Muenchen (Germany); Rummeny, Ernst J., E-mail: institut@roe.med.tum.de [Institut fuer Roentgendiagnostik, Klinikum rechts der Isar, Technische Universitaet Muenchen, Ismaninger Str. 22, 81675 Muenchen (Germany); Link, Thomas M., E-mail: thomas.link@radiology.ucsf.edu [Musculoskeletal and Quantitative Imaging Research, Department of Radiology and Biomedical Imaging, University of California San Francisco, 185 Berry Street, Suite 350, San Francisco, CA 94107 (United States); Bauer, Jan S., E-mail: jsb@roe.med.tum.de [Institut fuer Roentgendiagnostik, Klinikum rechts der Isar, Technische Universitaet Muenchen, Ismaninger Str. 22, 81675 Muenchen (Germany)

    2011-11-15

    Purpose: To assess QCT equivalent BMD of the lumbar spine in sagittal reformations of routine abdominal contrast-enhanced MDCT with simple PACS measurement tools and to apply this method to MDCT datasets for differentiating patients with and without osteoporotic vertebral fractures. Materials and methods: Eight postmenopausal women (65 {+-} 5years) underwent standard QCT to assess BMD of L1-L3. Afterwards routine abdominal contrast-enhanced MDCT images of these women were obtained and apparent BMD of L1-L3 was measured using the sagittal reformations. The MDCT-to-QCT conversion equation for BMD was calculated with linear regression analysis. The conversion equation was applied to vertebral BMD datasets (L1-L3) of 75 postmenopausal women (66 {+-} 4years). Seventeen of the 75 patients had osteoporotic vertebral fractures. Results: BMD values of contrast-enhanced MDCT were on average 56 mg/ml higher than those of standard QCT. A correlation coefficient of r = 0.94 (p < 0.05) was calculated for the BMD values of MDCT and standard QCT with the conversion equation BMD{sub QCT} = 0.69 x BMD{sub MDCT} - 11 mg/ml. Accordingly converted BMD values of patients with vertebral fractures were significantly lower than those of patients without vertebral fractures (69 mg/ml vs. 85 mg/ml; p < 0.05). Using ROC analysis to differentiate patients with and without vertebral fractures, AUC = 0.72 was obtained for converted BMD values (p < 0.05). Short- and long-term reproducibility errors for BMD measurements in the sagittal reformations amounted 2.09% and 7.70%, respectively. Conclusion: BMD measurements of the spine could be computed in sagittal reformations of routine abdominal contrast-enhanced MDCT with minimal technical and time effort. Using the conversion equation, the acquired BMD data could differentiate patients with and without osteoporotic vertebral fractures.

  19. Neutron energy measurement for practical applications

    Indian Academy of Sciences (India)

    M V Roshan

    2018-02-07

    . Elastic scattering of monoenergetic α-particles from neutron collision enables neutron energy measurement by calculating the amount of deviation from the position where collision takes place. The neutron numbers with ...

  20. Energy Based Acoustic Measurement Senors, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — This research focuses on fully developing energy density sensors that will yield a significant benefit both for measurements of interest to NASA, as well as for...

  1. Energy Based Acoustic Measurement Senors Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This research focuses on fully developing energy density sensors that will yield a significant benefit both for measurements of interest to NASA, as well as for...

  2. Measurement of fission fragments energy loss

    CERN Document Server

    Benetti, P; Calligarich, E; Cesana, A; Dolfini, R; Ioppolo, T; Raselli, G L; Terrani, M

    2002-01-01

    The mean energy of sup 2 sup 5 sup 2 Cf fission fragments emerging from an absorber and the determination of the capture rate in the absorber itself have been measured using two independent and complementary nuclear techniques. The results can be applied to the measurement of the energy self-absorption in a non-zero thickness source and can be used to validate simulation programs.

  3. Dynamic properties of energy affordability measures

    International Nuclear Information System (INIS)

    Heindl, Peter; Schuessler, Rudolf

    2015-01-01

    Measures of affordability and of fuel poverty are applied in practice to assess the affordability of energy services, for example, or of water or housing. The extensive body of literature on affordability measures has little overlap with the existing literature on poverty measurement. A comprehensive assessment of the response of affordability measures as a result of changes in the distribution of income or expenditure (the dynamic properties) is missing. This paper aims to fill this gap by providing a conceptual discussion on the ‘dynamics’ of both energy affordability measures and fuel poverty measures. Several types of measures are examined in a microsimulation framework. Our results indicate that some measures exhibit odd dynamic behavior. This includes measures used in practice, such as the low income/high cost measure and the double median of expenditure share indicator. Odd dynamic behavior causes the risk of drawing false policy recommendations from the measures. Thus, an appropriate response of affordability measures to changes in relevant variables is a prerequisite for defining meaningful measures that inform about affordability or deprivation in certain domains of consumption. - Highlights: • We investigate changes in fuel poverty measures as result from changes in income and expenditure. • More generally, we investigate dynamic behavior of affordability measures using microsimulation. • We propose axioms regarding dynamic behavior of affordability measures. • Some measures which are used in practice show unintuitive dynamic behavior. • Inappropriate dynamic behavior causes a risk of false policy implications.

  4. Measuring Labour Supply Responses to Tax Changes by Use of Exogenous Tax Reforms

    DEFF Research Database (Denmark)

    Graversen, Ebbe Krogh

    1996-01-01

    This paper estimates average labour supply responses to tax changes for women in Denmark using the tax reform in 1987 as a natural experiment to identify the responsiveness to tax changes. Both changes in the participation rate and in worki ng hous are considered. A nonparametric difference......-in-difference (DID) estimator and a suitable modified parametric DID estimator are used to estimate the labour supply responses and calculate labour supply elasticities with respect to marg inal tax rates and wage rates net of taxes. Finally, we simulate the effect of the fully implemented Danish 1994/1998 tax...... reform....

  5. Fiber-optic diagnostic for energy measurements

    Science.gov (United States)

    Lockwood, G. L.; Muron, D. J.; Ruggles, L. E.; Chang, J.; Bloomquist, D. D.; Babcock, S. R.

    A fiber-optic diagnostic system based on calorime try to measure the total energy deposited in a liquid-filled load resistor is developed. Thermodynamic calculations show the fluid temperature to come to equilibrium in about two seconds and to remain there for several tens of seconds. Thus fluid temperature can determine the energy deposited. Using a fluoroptic thermometer, the change in temperature of a copper sulfate solution load resistor was measured as a function of the energy stored in a capacitor bank. A comparison of these results with the calculated temperature rise shows agreement to + or - 3% over the energy range from 1.4 kJ to 5.9 kJ. Measurements were then made of the energy deposited in a sodium chloride solution load resistor on the Ripple accelerator. These were made as a function of energy stored in the Marx generator from 7.4 kJ to 21.2 kJ. Electrical measurements of the energy deposited were made at the same time. These were high on the average by 8%.

  6. Using best-worst scaling choice experiments to measure public perceptions and preferences for healthcare reform in australia.

    Science.gov (United States)

    Louviere, Jordan J; Flynn, Terry N

    2010-12-01

    : One of the greatest difficulties in evaluating healthcare system reform in any country is that governments often do not clearly articulate what it is they are attempting to do. In Australia, a recent inquiry set out 15 principles to guide the reform process, but it remains unclear how the Australian public values the principles, how such values vary across the country, and, more fundamentally, if Australians understand the principles. : To evaluate the Australian healthcare reform principles from the perspective of the Australian public, to test if such preferences are valued consistently across geographic and socioeconomic strata, and to test for the degree of understanding of the principles among the public. : We employed best-worst scaling (BWS), a stated-preference method grounded in random utility theory, to elicit public preference for 15 healthcare reform principles. The BWS tasks were incorporated into an online survey that also gathered geographic and socioeconomic information and included questions relating to the understanding of the reform principles. Respondents were a geographically diverse set of Australians who were randomized to receive one of two versions of the survey, each containing a block of 15 choice tasks. Tasks in block one contained a subset of the choice tasks containing subsets of seven principles based on a balanced incomplete block design, while tasks in block two contained tasks with eight principles defined by the complement of the former.In each BWS task, respondents were simply asked to identify the most and least important principle. Analysis of preference was based on assigning the most valued principles a '1' and the least valued principles '-1', and with each item appearing eight times in each block, preferences were analyzed over a cardinal utility scale bounded by -8 and +8. Analysis was based on simple summary statistics and stratified by geographic and socioeconomic measures. : A sample of 204 respondents participated in

  7. The reform of energy subsidies for the enhancement of marine sustainability: An empirical analysis of energy subsidies worldwide and an in-depth case study of South Korea's energy subsidy policies

    Science.gov (United States)

    Shim, Jae Hyun

    This dissertation seeks to raise awareness about harmful effects of fossil fuel and nuclear energy subsidies that have blocked transition from conventional energy to a decarbonized, renewable energy system. Today, humans face daunting challenges in the form of global warming, which results mainly from the burning of fossil fuels. To avoid catastrophe, the transition to a renewable energy regime should be an urgent priority; however, the reality is that the progress of renewable energy is very slow due to the various political and economic factors when compared to conventional energy resources. A chief factor is that the energy subsidy for fossil fuel and nuclear energy obstructs the "level playing field" for renewable energy. Energy subsidies for conventional energy can be understood in the context of the commodification paradigm, which regards nature as an object of conquest and supports the principle of more is better. Although fossil fuel energy damages the environment, economy, and social equity, all countries subsidize such energy, no matter the country's state of development. This holds true as much in the U.S. and the EU as in China, India and South Korea. The oceans, which cover 71% of the earth, are threatened by the activities of conventional energy, which are underpinned by subsidies. These subsidies have contributed to the destruction of the marine ecosystem through increased GHG emissions like CO2 and NOx which cause a sea temperature increase and coral bleaching. Subsidies also significantly affect fishery overexploitation, oil pollution, and thermal pollution. In-depth empirical analysis of South Korea showed how fossil fuel and nuclear energy activities have threatened marine sustainability through thermal pollution, algae bloom (red tides), overexploitation, and oil-related marine pollution. Reforming subsidies of fossil fuel and nuclear energy should be a global priority because of imminent of global warming. As strategies for energy subsidy

  8. Measuring Income and Projecting Energy Use

    International Nuclear Information System (INIS)

    Pitcher, Hugh M.

    2009-01-01

    Energy is a key requirement for a healthy, productive life and a major driver of the emissions leading to an increasingly warm planet. The implications of a doubling and redoubling of per capita incomes over the remainder of this century for energy use are a critical input into understanding the magnitude of the carbon management problem. A substantial controversy about how the Special Report on Emssions Scenarios (SRES) measured income and the potential implications of how income was measured for long term levels of energy use is revisited again in the McKibbin, Pearce and Stegman article appearing elsewhere in this issue. The recent release of a new set of purchasing power estimates of national income, and the preparations for creating new scenarios to support the IPCC's fifth assessment highlight the importance of the issues which have arisen surrounding income and energy use. Comparing the 1993 and 2005 ICP results on Purchasing Power Parity (PPP) based measures of income reveals that not only do the 2005 ICP estimates share the same issue of common growth rates for real income as measured by PPP and US $, but the lack of coherence in the estimates of PPP incomes, especially for developing countries raises yet another obstacle to resolving the best way to measure income. Further, the common use of an income term to mediate energy demand (as in the Kaya identity) obscures an underlying reality about per capita energy demands, leading to unreasonable estimates of the impact of changing income measures and of the recent high GDP growth rates in India and China. Significant new research is required to create both a reasonable set of GDP growth rates and long term levels of energy use.

  9. Multiaspect measurement analysis of breaking energy recovery

    International Nuclear Information System (INIS)

    Bartłomiejczyk, Mikołaj; Połom, Marcin

    2016-01-01

    Highlights: • A case study of implementation of eco energy technologies in municipal transport. • The “ready to use” methods are presented. • The “niche” ways of increasing efficiency, e.g. “intelligent heating”. • Novel multi way measurement method using GPS localization system. • Confirmation of the results by means of research and experimental measurement. - Abstract: Nowadays the issue of electric energy saving in public transport is becoming a key area of interest, which is connected both with a growth of environmental awareness in the society and an increase in the prices of fuel and electricity. That is why the reduction of energy consumption by increasing electrified urban transport, such as trams, trolleybuses, light rail and underground is becoming an increasingly important issue. Energy recovery during braking is possible in all modern electric vehicles, but in many cases this possibility is not fully taken advantage of, inter alia, because of an inadequate power supply structure. The aim of this article is to present practical examples of implementation of eco-friendly solutions in urban municipal transport. The article shows a thorough analysis of braking energy dispatch in the urban traction power supply system, which was based on extensive measurement research conducted in Gdynia trolleybus network. The authors applied multi way measurement method using Global Positioning System. The optimal conditions for implementation of several methods of energy recovery (storage energy systems, reconfiguration of supply system, using auxiliaries) have been shown. Great emphasis has been put on the confirmation of the results by means of research and experimental measurement.

  10. Energy Savings Measure Packages. Existing Homes

    Energy Technology Data Exchange (ETDEWEB)

    Casey, Sean [National Renewable Energy Lab. (NREL), Golden, CO (United States); Booten, Chuck [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2011-11-01

    This document presents the most cost effective Energy Savings Measure Packages (ESMP) for existing mixed-fuel and all electric homes to achieve 15% and 30% savings for each BetterBuildings grantee location across the United States. These packages are optimized for minimum cost to homeowners for source energy savings given the local climate and prevalent building characteristics (i.e. foundation types). Maximum cost savings are typically found between 30% and 50% energy savings over the reference home; this typically amounts to $300 - $700/year.

  11. Energy Savings Measure Packages: Existing Homes

    Energy Technology Data Exchange (ETDEWEB)

    Casey, S.; Booten, C.

    2011-11-01

    This document presents the most cost effective Energy Savings Measure Packages (ESMP) for existing mixed-fuel and all electric homes to achieve 15% and 30% savings for each BetterBuildings grantee location across the US. These packages are optimized for minimum cost to homeowners for given source energy savings given the local climate and prevalent building characteristics (i.e. foundation types). Maximum cost savings are typically found between 30% and 50% energy savings over the reference home. The dollar value of the maximum annual savings varies significantly by location but typically amounts to $300 - $700/year.

  12. Fission cross section measurements at intermediate energies

    International Nuclear Information System (INIS)

    Laptev, Alexander

    2005-01-01

    The activity in intermediate energy particle induced fission cross-section measurements of Pu, U isotopes, minor actinides and sub-actinides in PNPI of Russia is reviewed. The neutron-induced fission cross-section measurements are under way in the wide energy range of incident neutrons from 0.5 MeV to 200 MeV at the GNEIS facility. In number of experiments at the GNEIS facility, the neutron-induced fission cross sections were obtained for many nuclei. In another group of experiments the proton-induced fission cross-section have been measured for proton energies ranging from 200 to 1000 MeV at 100 MeV intervals using the proton beam of PNPI synchrocyclotron. (author)

  13. Sustainable or Distributed Energy—or both? Clarifying the Basic Concepts of Reforming the Energy Sector

    OpenAIRE

    Pekka Peura; Patrik Sjöholm

    2015-01-01

    This paper clarifies the concepts of Sustainable Energy (SE) and Distributed Energy (DE) including their related synonyms, by discussing, analyzing and presenting recommendations. This is important because these concepts are crucial in the on-going transformation from the fossil carbon based to renewable energy based societies, but still the use of the concepts has been confusing. SE consists of the integration of rational use of energy (energy saving, energy efficiency, use of renewable ener...

  14. Anaerobic digestion for methane generation and ammonia reforming for hydrogen production: A thermodynamic energy balance of a model system to demonstrate net energy feasibility

    International Nuclear Information System (INIS)

    Babson, David M.; Bellman, Karen; Prakash, Shaurya; Fennell, Donna E.

    2013-01-01

    During anaerobic digestion, organic matter is converted to carbon dioxide and methane, and organic nitrogen is converted to ammonia. Generally, ammonia is recycled as a fertilizer or removed via nitrification–denitrification in treatment systems; alternatively it could be recovered and catalytically converted to hydrogen, thus supplying additional fuel. To provide a basis for further investigation, a theoretical energy balance for a model system that incorporates anaerobic digestion, ammonia separation and recovery, and conversion of the ammonia to hydrogen is reported. The model Anaerobic Digestion-Bioammonia to Hydrogen (ADBH) system energy demands including heating, pumping, mixing, and ammonia reforming were subtracted from the total energy output from methane and hydrogen to create an overall energy balance. The energy balance was examined for the ADBH system operating with a fixed feedstock loading rate with C:N ratios (gC/gN) ranging from 136 to 3 which imposed corresponding total ammonia nitrogen (TAN) concentrations of 20–10,000 mg/L. Normalizing total energy potential to the methane potential alone indicated that at a C:N ratio of 17, the energy output was greater for the ADBH system than from anaerobic digestion generating only methane. Decreasing the C:N ratio increased the methane content of the biogas comprising primarily methane to >80% and increased the ammonia stripping energy demand. The system required 23–34% of the total energy generated as parasitic losses with no energy integration, but when internally produced heat and pressure differentials were recovered, parasitic losses were reduced to between 8 and 17%. -- Highlights: •Modeled an integrated Anaerobic Digestion-Bioammonia to Hydrogen (ADBH) system. •Demonstrated positive net energy produced over a range of conditions by ADBH. •Demonstrated significant advantages of dual fuel recovery for energy gain by >20%. •Suggested system design considerations for energy recovery with

  15. Measurements of low energy auroral ions

    International Nuclear Information System (INIS)

    Urban, A.

    1981-01-01

    This paper summarizes ion measurements in the energy range 0.1 to 30 keV observed during the campaigns 'Substorm Phenomena' and 'Porcupine'. For a clear survey of the physical processes during extraordinary events, sometimes ion measurements of higher energies are also taken into account. Generally, the pitch angle distributions were isotropic during all flights except some remarkable events. In general the ion and electron flux intensities correlated, but sometimes revealed a spectral anti-correlation. Acceleration of the ions by an electrostatic field aligned parallel to the magnetic field could be identified accompanied by intense electron precipitation. On the other hand deceleration of the ions was observed in other field-aligned current sheets which are indicated by the electron and magnetic field measurements. Temporal successive monoenergetic ion variations pointed to energy dispersion and to the location of the source region at 9 Rsub(E). Furthermore, ion fluxes higher than those of the electrons were measured at pitch angles parallel to the magnetic field. The integral down-going number and energy flux of the ions contributed to the total particle or energy influx between 65% and less than 7% and did not clearly characterize the geophysical launch conditions or auroral activities. (author)

  16. Energy market reform in Europe. European energy and climate policies: achievements and challenges to 2020 and beyond

    International Nuclear Information System (INIS)

    2015-01-01

    Since the 1992 Earth Summit in Rio and the negotiation of the United Nations Framework Convention on Climate Change (UNFCCC), the European Union has consistently been at the forefront of global action to combat climate change, leading the world to a low-carbon economy. The EU has set itself greenhouse gas emission targets designed to produce an almost carbon-free economy by 2050 in order to make a major contribution to limiting the global temperature increase by the end of the century to 2 deg. C, compared to the pre-industrial average. As an interim step on the way to 2050, EU leaders in March 2007 set a number of ambitious climate and energy targets known as the '20-20-20 targets by 2020' or the 3 x 20 policy. In this, the EU committed to: - A 20% reduction in EU greenhouse gas emissions from 1990 levels; - Raising the share of EU energy consumption produced from renewable resources to 20%; and - A 20% improvement in the EU's energy efficiency. This 3 x 20 package is a part of a wider European energy strategy that aims at enhancing: - Sustainability; - Competitiveness and affordability; and - Security of supply. The EU energy and climate package has attracted criticism in the last few years, as each day brought more evidence that the policy measures had numerous unexpected, or unintended impacts on the energy markets and industry: an excess of intermittent sources of electricity causing disruption for grid operators, surplus electricity resulting in a price collapse of the wholesale electricity market, electricity price increase at retail level, exit of gas from the fuels for power generation and the advent of coal as an electricity price-setter... At the same time, it has also become evident that EU policy has failed to solve the existing EU energy imbalances in general. Ironically, after years of huge investments aimed at achieving the ambitious policy targets, a number of the objectives still seem to be a long way away. Indeed some may not even

  17.  Railway Reforms

    DEFF Research Database (Denmark)

    Asmild, Mette; Holvad, Torben; Hougaard, Jens Leth

    This paper considers railway operations in 23 European countries during 1995-2001, where a series of reform initiatives were launched by the European Commission, and analyses whether these reform initiatives improved the operating efficiency of the railways. Efficiency is measured using Multi-dir...... empirical evidence that accounting separation is important for improving operating efficiency for both material and staff costs, whereas other reforms only influenced one of these factors...

  18. Enermet in the forefront of energy measurement

    Energy Technology Data Exchange (ETDEWEB)

    Takala, R.; Suonperae, J.; Alatalo-Korpi, H. [ed.

    1997-11-01

    The deregulation of energy markets presents increasing challenges to the traditional measurement business and at the same time puts special demands on system solutions. Power companies are placing emphasis on the remote accessibility of measurement data at customer sites and on a greater variety of rates. Enermet, a member of the IVO Group, is a frontrunner in this business area, investing 8 % of its turnover in product development

  19. Productivity benefits of industrial energy efficiency measures

    Energy Technology Data Exchange (ETDEWEB)

    Worrell, Ernst; Laitner, John A.; Michael, Ruth; Finman, Hodayah

    2004-08-30

    We review the relationship between energy efficiency improvement measures and productivity in industry. We review over 70 industrial case studies from widely available published databases, followed by an analysis of the representation of productivity benefits in energy modeling. We propose a method to include productivity benefits in the economic assessment of the potential for energy efficiency improvement. The case-study review suggests that energy efficiency investments can provide a significant boost to overall productivity within industry. If this relationship holds, the description of energy-efficient technologies as opportunities for larger productivity improvements has significant implications for conventional economic assessments. The paper explores the implications this change in perspective on the evaluation of energy-efficient technologies for a study of the iron and steel industry in the US. This examination shows that including productivity benefits explicitly in the modeling parameters would double the cost-effective potential for energy efficiency improvement, compared to an analysis excluding those benefits. We provide suggestions for future research in this important area.

  20. The rise and fall of French Ecological Tax Reform: social acceptability versus political feasibility in the energy tax implementation process

    International Nuclear Information System (INIS)

    Deroubaix, Jose-Frederic; Leveque, Francois

    2006-01-01

    The French government has a 10-year history of negotiations with industry, resulting in voluntary agreements on energy consumption. When implemented, these voluntary agreements produced very few results in terms of global reduction of greenhouse emissions (Politiques et Management Public 11(4) (1993) 47), hence the idea of an energy tax became increasingly attractive for many French decision-makers. Ecological/Environmental Tax Reform (ETR) should have been one of the major political decisions and successes of the past leftwing coalition government. Instead it became one of its major failures as the Constitutional Court decided to terminate the energy tax project in December 2000. Through insights gleaned from focus groups and interviews with business-people and decision-makers, an attempt is made to understand the failure of the energy tax project. Firstly, decision-makers lacked crucial information about public and business opinions and secondly, there were conflicts between the relevant administrations. The fuel revolts of 2000 ended any hope of resolving the conflicts and implementing ETR, which was ultimately found unconstitutional. This paper examines the political controversies raised by the ETR project and the reasons for its eventual collapse, in the hope of contributing new understanding to the body of knowledge on the political difficulties of introducing environmental policy instruments

  1. "Economic growth and the reform of the judicial system of Bulgaria in the period 2000-2015 (vision for a new measurement model)"

    OpenAIRE

    Nozharov, Shteryo

    2015-01-01

    The publication proposes a concept for new model for evaluation of the “reform of the judicial system”, different from those applied by the World Bank and the International Monetary Fund where the economic growth rate of each country is measured. Their models, based on performance indicators, examine the “reform of the judicial system” as constant and floating in time, evaluated in certain periods of time. This fact obstructs the identification of the relative legislative miscarriages of ever...

  2. Energy efficiency policies and measures in Norway

    Energy Technology Data Exchange (ETDEWEB)

    Rosenberg, Eva

    2012-07-01

    This report represents the national case study of Norway for the IEE-project {sup M}onitoring of EU and national energy efficiency targets (ODYSSEE-MURE 2010)'. The Norwegian part of the project is co-funded by Enova. The report presents the recent energy efficiency trends in Norway on the basis of indicators extracted from the ODYSSEE database. The database contains information on energy use in a detailed level of the industry, transport, household and service sectors and other energy use. lt also contains information on energy drivers like heated square meters in the households and services sectors, transported passenger-km and ton-km of gods, value added, production index, production volumes etc. Final energy consumption has increased from 195 TWh in 1990 lo 229 TWh in 2010 The last ten years the energy consumption has varied between 212I Wh (2009) and 229 TWh (2010) with an annual average of 221TfUh. The sector using most energy is the industry, but the share has decreased from 40 % in 1990 to 31 % in 2010. From 1990 to 2010 the growth rate has been highest in the transport sector. Half of the energy end-use was electricity in 20,10, 42 % was fossil fuels and 6 % was biomass. The electricity use has an annual increase of 0.8 % since 1990, but the last decade the annual increase is reduced to 0.14 %. The consumption of oil products has decreased in stationary end-use (heating) and increased in the transport sector. In ODYSSEE, an aggregate bottom-up energy efficiency index, ODEX, is calculated. This energy efficiency index aggregates the trends in the detailed bottom-up indicators in one single indicator. This ODEX has improved by 26 o/o from 1990 to 2010 or by 1.3 o/o per year. This means that energy efficiency policies and measures implemented since 1990 have contributed to a decrease in the energy use of 2010 of approximately 59 TWh. (Author)

  3. An Empirical Study on the Driving Path of Optimizing the Resources Allocation of Foreign Trade Enterprises from the Perspective of Energy Supply-side Reform

    Science.gov (United States)

    You, Yu-cong; Yi, Lu-xia

    2017-11-01

    From the perspective of energy supply-side reform, this paper, by conducting an empirical study on foreign trade enterprises, conducts a research on the cross-role effect of optimizing the resources allocation and enhancing the energy efficiency. Methodologically, this paper creatively introduces the HILE's probabilistic structured property into Granger causality test analysis, forming an HILE-Granger (H-G) model, so as to empirically estimate both the short-term and long-term causal relationship effects between the energy efficiency and resources allocation. Conclusion is drawn that optimization of resources allocation is positively proportional with the energy efficiency enhancement. This paper is to provide a decision-making reference for the supply side reform strategy of foreign trade enterprises under the background of green energy economy.

  4. On the environmental impact of energy market liberalisation: Environmental policy, economic reform and endogenous technology

    NARCIS (Netherlands)

    D.P. van Soest (Daan); H.L.F. de Groot (Henri)

    2003-01-01

    textabstractIn the literature, attention has been paid to the environmental consequences of lower energy prices caused by market liberalisation: the drop in energy prices reduces the attractiveness of investing in energy-saving technologies. In this paper we develop a simple model of investment

  5. New approach to energy loss measurements

    CERN Document Server

    Trzaska, W H; Alanko, T; Mutterer, M; Raeisaenen, J; Tjurin, G; Wojdyr, M

    2002-01-01

    A new approach to energy loss measurements is proposed. In the same experiment electronic stopping force (power) in gold, nickel, carbon, polycarbonate and Havar for sup 4 sup 0 Ar, sup 2 sup 8 Si, sup 1 sup 6 O, sup 4 He and sup 1 H ions in the energy range 0.12-11 MeV/u has been measured. In this paper we give the full results for gold, nickel, and carbon and for sup 4 sup 0 Ar, sup 1 sup 6 O, sup 4 He and sup 1 H ions. Good agreement of the measured stopping force values for light ions with literature data is interpreted as the positive test of the experimental technique. The same technique used with heavy ions yields agreement with the published data only for energies above 1 MeV/u. At lower energies we observe progressively increasing discrepancy. This discrepancy is removed completely as soon as we neglect pulse height defect compensation. This observation makes us believe that the majority of the published results as well as semi-empirical calculations based on them (like the popular SRIM) may be in er...

  6. Measuring efficiency and productivity change (PTF) in the Peruvian electricity distribution companies after reforms

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Reyes, Raul [Organismo Supervisor de la Inversion en Energia y Mineria, Osinergmin (Peru); Tovar, Beatriz [Infrastructure and Transport Research Group (EIT), Department of Applied Economics, University of Palmas de Gran Canaria (Spain)

    2009-06-15

    This paper analyzes the evolution of productivity of the electricity distribution companies in Peru, to assess whether reforms have improved the efficiency in this sector. The paper also identifies potential sources of productivity changes, based on market restructuring the electricity sector and changes in property. To do this, we rely on a set of data for 14 distribution companies, for the period 1996-2006. Our analysis suggests that improvements in the efficiency and productivity of electricity distribution in Peru have occurred, and that there is a relationship between the restructuring of distribution sector and the enhancement of productivity. (author)

  7. Measuring efficiency and productivity change (PTF) in the Peruvian electricity distribution companies after reforms

    International Nuclear Information System (INIS)

    Perez-Reyes, Raul; Tovar, Beatriz

    2009-01-01

    This paper analyzes the evolution of productivity of the electricity distribution companies in Peru, to assess whether reforms have improved the efficiency in this sector. The paper also identifies potential sources of productivity changes, based on market restructuring the electricity sector and changes in property. To do this, we rely on a set of data for 14 distribution companies, for the period 1996-2006. Our analysis suggests that improvements in the efficiency and productivity of electricity distribution in Peru have occurred, and that there is a relationship between the restructuring of distribution sector and the enhancement of productivity. (author)

  8. Pulse energy measurement at the SXR instrument

    International Nuclear Information System (INIS)

    Moeller, Stefan; Brown, Garth; Dakovski, Georgi; Hill, Bruce; Holmes, Michael; Loos, Jennifer; Maida, Ricardo; Paiser, Ernesto; Schlotter, William; Turner, Joshua J.; Wallace, Alex; Jastrow, Ulf; Kreis, Svea; Sorokin, Andrey A.; Tiedtke, Kai

    2015-01-01

    A gas monitor detector was implemented and characterized at the Soft X-ray Research instrument (SXR) to measure the average, absolute and pulse-resolved photon flux of the LCLS beam in the energy range between 280 and 2000 eV. A gas monitor detector was implemented and characterized at the Soft X-ray Research (SXR) instrument to measure the average, absolute and pulse-resolved photon flux of the LCLS beam in the energy range between 280 and 2000 eV. The detector is placed after the monochromator and addresses the need to provide reliable absolute pulse energy as well as pulse-resolved measurements for the various experiments at this instrument. This detector provides a reliable non-invasive measurement for determining flux levels on the samples in the downstream experimental chamber and for optimizing signal levels of secondary detectors and for the essential need of data normalization. The design, integration into the instrument and operation are described, and examples of its performance are given

  9. Fossil fuel subsidy reform: lessons from the Indonesian case

    International Nuclear Information System (INIS)

    Savatic, Filip

    2016-10-01

    Global assessments of consumption and the Indonesian case show the relevance of non-household consumers of subsidized energy products. As shown in this study, understanding in more nuance how reforms affect them has the potential to improve the reforms that will be developed by policy-makers worldwide. Further study can reinforce the many benefits of successful reform for the countries and societies slowly turning away from these policies of the past. Estimates regarding the amount of public funds utilized to subsidize the production or consumption of fossil fuels are staggering. For 2011, they range from $83 billion in OECD member states, to nearly $4.1 trillion worldwide if environmental externalities are considered. Numerous studies have demonstrated that subsidies repress economic growth, undermine energy sector investment, increase public debt, benefit wealthy citizens over the poor, instigate a rise in illicit activities, and engender greater global and local pollution. The negative effects of fossil fuel subsidies have led numerous governments to reform their energy policies. There has also been a growing international consensus in favor of reform. While the components of successful reform programs have been identified through past case studies, the nature of reforms adopted by several governments that target non-households have not been systematically examined. Since the late 1990s, the Indonesian government has implemented numerous reforms of its fossil fuel subsidies, including measures targeting household as well as non-household energy consumption. In doing so, it has incurred significant fiscal savings. However, an innovative budgetary analysis reveals that households receive a minority, and a declining share, of fossil fuel subsidy funds. This is the case despite the fact that subsidies were implemented to ensure poor households have access to cheap energy. These findings demonstrate the need to consider non-household sectors in the design of fossil

  10. Neutron Energy Measurements in Emergency Response Applications

    Energy Technology Data Exchange (ETDEWEB)

    Sanjoy Mukhopadhyay, Paul Guss, Michael Hornish, Scott Wilde, Tom Stampahar, Michael Reed

    2009-09-11

    We present significant results in recent advances in the measurement of neutron energy. Neutron energy measurements are a small but significant part of radiological emergency response applications. Mission critical information can be obtained by analyzing the neutron energy given off from radioactive materials. In the case of searching for special nuclear materials, neutron energy information from an unknown source can be of importance. At the Remote Sensing Laboratory (RSL) of National Security Technologies, LLC, a series of materials, viz., liquid organic scintillator (LOS), Lithium Gadolinium Borate (LGB) or Li6Gd(BO3)3 in a plastic matrix, a recently developed crystal of Cesium Lithium Yttrium Chloride, Cs2LiYCl6: Ce (called CLYC)[1], and normal plastic scintillator (BC-408) with 3He tubes have been used to study their effectiveness as a portable neutron energy spectrometer. Comparisons illustrating the strengths of the various materials will be provided. Of these materials, LGB offers the ability to tailor its response to the neutron spectrum by varying the isotopic composition of the key constituents (Lithium, Gadolinium [Yttrium], and Boron). All three of the constituent elements possess large neutron capture cross section isotopes for highly exothermic reactions. These compounds of composition Li6Gd(Y)(BO3)3 can be activated by Cerium ions Ce3+. CLYC, on the other hand, has a remarkable gamma response in addition to superb neutron discrimination, comparable to that of Europium-doped Lithium Iodide (6LiI: Eu). Comparing these two materials, CLYC has higher light output (4500 phe/MeV) than that from 6LiI: Eu and shows better energy resolution for both gamma and neutron pulse heights. Using CLYC, gamma energy pulses can be discriminated from the neutron signals by simple pulse height separation. For the cases of both LGB and LOS, careful pulse shape discrimination is needed to separate the gamma energy signals from neutron pulses. Both analog and digital

  11. Environmental Tax Reforms and Mitigation for Energy-intensive Industries: Some Lessons from European Experience

    DEFF Research Database (Denmark)

    Andersen, Mikael Skou

    2009-01-01

    The purpose of this paper is to analyse in more detail the international experiences in applying carbon-energy taxation in two important energy-intensive sectors; iron and steel, as well as non-metallic mineral products (where cement is the most significant subsector).......The purpose of this paper is to analyse in more detail the international experiences in applying carbon-energy taxation in two important energy-intensive sectors; iron and steel, as well as non-metallic mineral products (where cement is the most significant subsector)....

  12. Uncertainty in relative energy resolution measurements

    International Nuclear Information System (INIS)

    Volkovitsky, P.; Yen, J.; Cumberland, L.

    2007-01-01

    We suggest a new method for the determination of the detector relative energy resolution and its uncertainty based on spline approximation of experimental spectra and a statistical bootstrapping procedure. The proposed method is applied to the spectra obtained with NaI(Tl) scintillating detectors and 137 Cs sources. The spectrum histogram with background subtracted channel-by-channel is modeled by cubic spline approximation. The relative energy resolution (which is also known as pulse height resolution and energy resolution), defined as the full-width at half-maximum (FWHM) divided by the value of peak centroid, is calculated using the intercepts of the spline curve with the line of the half peak height. The value of the peak height is determined as the point where the value of the derivative goes to zero. The residuals, which are normalized over the square root of counts in a given bin (y-coordinate), obey the standard Gaussian distribution. The values of these residuals are randomly re-assigned to a different set of y-coordinates where a new 'pseudo-experimental' data set is obtained after 'de-normalization' of the old values. For this new data set a new spline approximation is found and the whole procedure is repeated several hundred times, until the standard deviation of relative energy resolution becomes stabilized. The standard deviation of relative energy resolutions calculated for each 'pseudo-experimental' data set (bootstrap uncertainty) is considered to be an estimate for relative energy resolution uncertainty. It is also shown that the relative bootstrap uncertainty is proportional to, and generally only two to three times bigger than, 1/√(N tot ), which is the relative statistical count uncertainty (N tot is the total number of counts under the peak). The newly suggested method is also applicable to other radiation and particle detectors, not only for relative energy resolution, but also for any of the other parameters in a measured spectrum, like

  13. Measurement of magnetic fluctuation induced energy transport

    International Nuclear Information System (INIS)

    Fiksel, G.; Prager, S.C.; Shen, W.; Stoneking, M.

    1993-11-01

    The local electron energy flux produced by magnetic fluctuations has been measured directly in the MST reversed field pinch (over the radial range r/a > 0.75). The flux, produced by electrons traveling parallel to a fluctuating magnetic field, is obtained from correlation between the fluctuations in the parallel heat flux and the radial magnetic field. The fluctuation induced flux is large (100 kW/cm 2 ) in the ''core'' (r/a 2 ) in the edge

  14. The ambiguities of performance-based governance reforms in Italy: Reviving the fortunes of evaluation and performance measurement.

    Science.gov (United States)

    Marra, Mita

    2017-02-06

    Over the past two decades, Italy's administrative reforms have institutionalized evaluation to improve program effectiveness, staff productivity, and results-driven accountability against waste and corruption. Across ministries, regional governments, universities, schools and environmental protection agencies, seemingly unexpected consequences have emerged out of the implementation of performance measurement and evaluation regimes within public organizations. Formal compliance to legally binding evaluation procedures, judicially-sanctioned managerial accountability and lack of cross-agency coordination coupled with long-standing cultural separations among evaluators are some of the ambiguities associated with a performance-based governance system within Italian public administration. Building upon the 'new governane theory,' and qualitative fieldwork, I explore the political consequences of evaluation and performance measurement for possible improvements. From a normative perspective, greater integration between program evaluation and performance measurement can support organizational learning and democratic accountability both at the central and local level. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Collective flow measurements at RHIC energies

    Directory of Open Access Journals (Sweden)

    Esumi Shinichi

    2017-01-01

    Full Text Available Recent experimental results on collective flow measurements from relativistic heavy-ion collider (RHIC are presented and discussed to study high-temperature and high-density quark-nuclear matter, Quark Gluon Plasma (QGP especially focusing on bulk properties, such as freeze-out parameters, temperature, chemical potential, collective expansion, azimuthal event anisotropy measurements. Their relations to the various correlation and fluctuation studies are also discussed, including initial geometrical and E- and B-field conditions as well as possible collective flow evolution that could even be developed in small systems. Current results and understandings from the beam energy scan program (BES and future plans are discussed and reviewed.

  16. Automatic energy expenditure measurement for health science.

    Science.gov (United States)

    Catal, Cagatay; Akbulut, Akhan

    2018-04-01

    It is crucial to predict the human energy expenditure in any sports activity and health science application accurately to investigate the impact of the activity. However, measurement of the real energy expenditure is not a trivial task and involves complex steps. The objective of this work is to improve the performance of existing estimation models of energy expenditure by using machine learning algorithms and several data from different sensors and provide this estimation service in a cloud-based platform. In this study, we used input data such as breathe rate, and hearth rate from three sensors. Inputs are received from a web form and sent to the web service which applies a regression model on Azure cloud platform. During the experiments, we assessed several machine learning models based on regression methods. Our experimental results showed that our novel model which applies Boosted Decision Tree Regression in conjunction with the median aggregation technique provides the best result among other five regression algorithms. This cloud-based energy expenditure system which uses a web service showed that cloud computing technology is a great opportunity to develop estimation systems and the new model which applies Boosted Decision Tree Regression with the median aggregation provides remarkable results. Copyright © 2018 Elsevier B.V. All rights reserved.

  17. Political will and collaboration for electric power reform through renewable energy in Africa

    International Nuclear Information System (INIS)

    Chineke, Theo Chidiezie; Ezike, Fabian M.

    2010-01-01

    Climate change, in particular rainfall variability, affects rain-dependent agriculture in Africa. The resulting food shortages, in combination with rising population and lack of access to electricity needed for development, require the governments and people of Africa to consider renewable energy sources. One example that has high potential in Africa is solar energy. Many African governments have begun discussions about renewable energy but tangible results have yet to materialize. This research contributes to the governmental efforts by presenting the solar electricity potentials for some African cities. Using photovoltaic geographical information system (PVGIS) data, it is clear that there is enough electricity for urban and rural dwellers if there is political will and if the solar panels are mounted at the suggested optimal angles ranging from 8-34 deg. The solar irradiation at all sites was higher than the typical daily domestic load requirement of 2324 Wh/m 2 in urban and rural areas. We provide a strong rationale for political will, collaboration and transparent energy policies that will ensure that life is enhanced through the use of environmentally-friendly renewable energy technologies such as solar power.

  18. Application of Waste Heat Recovery Energy Saving Technology in Reform of UHP-EAF

    Science.gov (United States)

    Zhao, J. H.; Zhang, S. X.; Yang, W.; Yu, T.

    2017-08-01

    The furnace waste heat of a company’s existing 4 × 100t ultra-high-power electric arc furnaces is not used and discharged directly of the situation has been unable to meet the national energy-saving emission reduction requirements, and also affected their own competitiveness and sustainable development. In order to make full use of the waste heat of the electric arc furnace, this paper presents an the energy-saving transformation program of using the new heat pipe boiler on the existing ultra-high-power electric arc furnaces for recovering the waste heat of flue gas. The results show that after the implementation of the project can save energy equivalent to 42,349 tons of standard coal. The flue gas waste heat is fully utilized and dust emission concentration is accorded with the standard of Chinese invironmental protection, which have achieved good results.

  19. Iran's sustainable development and the need to a reform in energy consumption policy

    International Nuclear Information System (INIS)

    Mortazavi, S.M.J.; Hashemi, Z.

    2007-01-01

    The Islamic Republic of Iran has always paid a lot of attention to the concept of sustainable development since the article fifty of its constitution forbids any activity that results in pollution or in the irremediable destruction of the environment. According to the International Atomic Energy Agency (IAEA), the consumption of electricity is practically synonymous with modern life in the industrialized world. From this point of view, the optimization of production and consumption of energy are among the main strategies in both developed and developing countries. Considering a report published by the World Bank in 2004, over 96% of electricity production in Iran in 2001 came from fossil sources (74.9% from gas and 21.2% from oil) and the insignificant remaining part (3.9%) was based on hydroelectric sources. Although Iran's export of crude oil currently runs about 2.3 million barrels per day, total refining capacity of the country (1.5 million barrels per day) is insufficient to meet the country's domestic need. If the current rate of oil and gasoline consumption continues in Iran, the country will lose its oil export revenues by 2015. Combustion of fossil fuels in Iran produces large amounts of CO 2 (the biggest contributor to global warming), noxious gases, and many toxic pollutants. Analysis of carbon dioxide production in Iran clearly confirms the necessity of the use of emission-free alternative energy resources such as hydroelectric and nuclear power. It should be also noted that Iran's rich fossil resources can be used in many industrial fields such as petrochemistry, while currently the only practical application of uranium is energy production. It can be concluded that due to Iran's rapidly increasing energy demand, optimal use of fossil resources and using combination of proper resources such as hydro-nuclear energy as effective alternatives seem to be inevitable in the upcoming years of 21. century

  20. Measurement of the cleavage energy of graphite.

    Science.gov (United States)

    Wang, Wen; Dai, Shuyang; Li, Xide; Yang, Jiarui; Srolovitz, David J; Zheng, Quanshui

    2015-08-28

    The basal plane cleavage energy (CE) of graphite is a key material parameter for understanding many of the unusual properties of graphite, graphene and carbon nanotubes. Nonetheless, a wide range of values for the CE has been reported and no consensus has yet emerged. Here we report the first direct, accurate experimental measurement of the CE of graphite using a novel method based on the self-retraction phenomenon in graphite. The measured value, 0.37±0.01 J m(-2) for the incommensurate state of bicrystal graphite, is nearly invariant with respect to temperature (22 °C≤T≤198 °C) and bicrystal twist angle, and insensitive to impurities from the atmosphere. The CE for the ideal ABAB graphite stacking, 0.39±0.02 J m(-2), is calculated based on a combination of the measured CE and a theoretical calculation. These experimental measurements are also ideal for use in evaluating the efficacy of competing theoretical approaches.

  1. Modern money theory and ecological tax reform: A functional finance approach to energy conservation

    Science.gov (United States)

    McConnell, Scott L. B.

    This dissertation contributes to heterodox economics by developing a theoretical and policy-relevant link that will promote the conservation of energy while driving the value of the domestic currency. The analysis relies upon the theoretical foundation of modern money theory and functional finance, which states that "taxes-drive-money" where the value of a sovereign nation's currency is imputed through the acceptance by the sovereign nation of the currency in payment of taxation. This theoretical perspective lends itself to various public policy prescriptions, such as government employment policies or the employer of last resort (ELR), which has been discussed at length elsewhere (Wray 1998; Tcherneva 2007, Forstater 2003). This research contributes to this overall program by arguing that the basis for taxation under modern money theory allows public policy makers various alternatives regarding the make-up of the tax system in place. In particular, following functional finance, taxes do not have the sole purpose of paying for government spending, but rather drive the value of the currency and may be designed to perform other functions as well, such as penalizing socially undesirable behavior. The focus in this dissertation is on the amelioration of pollution and increasing energy conservation. The research question for this dissertation is this: what federally implemented tax would best serve the multiple criteria of 1) driving the value of the currency, 2) promoting energy conservation and 3) ameliorating income and wealth disparities inherent in a monetary production economy? This dissertation provides a suggestion for such a tax that would be part of a much larger overall policy program based upon the tenets of modern money theory and functional finance. Additionally, this research seeks to provide an important theoretical contribution to the emerging Post Keynesian and ecological economics dialog.

  2. FLUIDIZED BED STEAM REFORMING MINERALIZATION FOR HIGH ORGANIC AND NITRATE WASTE STREAMS FOR THE GLOBAL NUCLEAR ENERGY PARTNERSHIP

    Energy Technology Data Exchange (ETDEWEB)

    Jantzen, C; Michael Williams, M

    2008-01-11

    Waste streams that may be generated by the Global Nuclear Energy Partnership (GNEP) Advanced Energy Initiative may contain significant quantities of organics (0-53 wt%) and/or nitrates (0-56 wt%). Decomposition of high nitrate streams requires reducing conditions, e.g. organic additives such as sugar or coal, to reduce the NO{sub x} in the off-gas to N{sub 2} to meet the Clean Air Act (CAA) standards during processing. Thus, organics will be present during waste form stabilization regardless of which GNEP processes are chosen, e.g. organics in the feed or organics for nitrate destruction. High organic containing wastes cannot be stabilized with the existing HLW Best Developed Available Technology (BDAT) which is HLW vitrification (HLVIT) unless the organics are removed by preprocessing. Alternative waste stabilization processes such as Fluidized Bed Steam Reforming (FBSR) operate at moderate temperatures (650-750 C) compared to vitrification (1150-1300 C). FBSR converts organics to CAA compliant gases, creates no secondary liquid waste streams, and creates a stable mineral waste form that is as durable as glass. For application to the high Cs-137 and Sr-90 containing GNEP waste streams a single phase mineralized Cs-mica phase was made by co-reacting illite clay and GNEP simulated waste. The Cs-mica accommodates up to 30% wt% Cs{sub 2}O and all the GNEP waste species, Ba, Sr, Rb including the Cs-137 transmutation to Ba-137. For reference, the cesium mineral pollucite (CsAlSi{sub 2}O{sub 6}), currently being studied for GNEP applications, can only be fabricated at {ge} 1000 C. Pollucite mineralization creates secondary aqueous waste streams and NO{sub x}. Pollucite is not tolerant of high concentrations of Ba, Sr or Rb and forces the divalent species into different mineral host phases. The pollucite can accommodate up to 33% wt% Cs{sub 2}O.

  3. Hydrogen production by reforming of fossil and biomass fuels accompanied by carbon dioxide capture process is the energy source for the near future

    International Nuclear Information System (INIS)

    Aboudheir, Ahmed; Idem, Raphael; Tontiwachwuthikul, Paitoon; Wilson, Malcolm; Kambietz, Lionel

    2006-01-01

    Hydrogen has a significant future potential as an alternative energy source for the transportation sector as well as in residential homes and offices, H 2 in fuel cell power systems provides an alternative to direct fossil fuel and biomass combustion based technologies and offer the possibility for a significant reduction in greenhouse gas emission based on improved H 2 yield per unit of fossil fuel and biomass, compatibility with renewable energies and motivation to convert to a H 2 -based energy economy. Several practical techniques for H 2 production to service H 2 refuelling stations as well as homes and offices, all of which need to be located at the end of the energy distribution network, include: (1) the carbon dioxide reforming of natural gas; (2) reforming of gasoline; (3) reforming of crude ethanol. Locating the H 2 production at the end of the energy distribution network solves the well-known problems of metal fatigue and high cost of H 2 compression for long distance transportation if H 2 is produced in a large centralized plant. In addition, the ratification of the Kyoto Protocol and the need to reduce emissions of CO 2 to the atmosphere has prompted the capture and utilization of the CO 2 produced from the reforming process. In this research: (1) new efficient catalysts for each reforming process was developed; (2) a new efficient catalyst for our version of the water gas shift reaction to convert carbon monoxide to carbon dioxide was developed; (3) a new membrane separation process for production of high purity, fuel cell-grade H 2 was designed; (4) a numerical model for optimum process design and optimum utilization of resources both at the laboratory and industrial scales was developed; (5) various processes for CO 2 capture were investigated experimentally in order to achieve a net improvement in the absorption process; (6) the utilization of captured CO 2 for enhanced oil recovery and/or storage in an aging oil field were investigated; (7

  4. On the reform of the regulations in the Atomic Energy Act concerning governmental supervision

    International Nuclear Information System (INIS)

    Rebentisch, M.

    1991-01-01

    The deliberations on the amendment to the Atomic Energy Act aim at a harmonization with the Federal Immission Control Act. This holds especially for the area of regulations dealing with the installation. With its function as a licensing law for industrial installations the Federal Immission Control Act has a key position in technology and safety law. The lecture deals especially with the obligation to inform and with the right of the supervising authority to reserve its consent to minor alterations; legal qualification and lawfulness of the reservation of consent; reservation of consent to the start-up after an exchange of fuel elements; requirement of a permit for the decommissioning of installations. (orig./HSCH) [de

  5. Measuring the impact of marginal tax rate reform on the revenue base of South Africa using a microsimulation tax model

    Directory of Open Access Journals (Sweden)

    Yolande Jordaan

    2015-08-01

    Full Text Available This paper is primarily concerned with the revenue and tax efficiency effects of adjustments to marginal tax rates on individual income as an instrument of possible tax reform. The hypothesis is that changes to marginal rates affect not only the revenue base, but also tax efficiency and the optimum level of taxes that supports economic growth. Using an optimal revenue-maximising rate (based on Laffer analysis, the elasticity of taxable income is derived with respect to marginal tax rates for each taxable-income category. These elasticities are then used to quantify the impact of changes in marginal rates on the revenue base and tax efficiency using a microsimulation (MS tax model. In this first paper on the research results, much attention is paid to the structure of the model and the way in which the database has been compiled. The model allows for the dissemination of individual taxpayers by income groups, gender, educational level, age group, etc. Simulations include a scenario with higher marginal rates which is also more progressive (as in the 1998/1999 fiscal year, in which case tax revenue increases but the increase is overshadowed by a more than proportional decrease in tax efficiency as measured by its deadweight loss. On the other hand, a lowering of marginal rates (to bring South Africa’s marginal rates more in line with those of its peers improves tax efficiency but also results in a substantial revenue loss. The estimated optimal individual tax to gross domestic product (GDP ratio in order to maximise economic growth (6.7 per cent shows a strong response to changes in marginal rates, and the results from this research indicate that a lowering of marginal rates would also move the actual ratio closer to its optimum level. Thus, the trade-off between revenue collected and tax efficiency should be carefully monitored when personal income tax reform is being considered.

  6. Minimum quench energy measurement for superconducting wires

    International Nuclear Information System (INIS)

    Seo, K.; Morita, M.; Nakamura, S.; Yamada, T.; Jizo, Y.

    1996-01-01

    The authors have developed a new method of measuring minimum quench energy (MQE) of superconducting wire. There have been conventional methods using heating wires, whose diameters are ∼0.1mm and are glued by epoxy resin. When they induce a pulse heat to superconducting wires, a duration of the pulse must be several hundreds micro seconds to demonstrate actual disturbances (for instance wire motion) in a superconducting magnet. In spite of this fact, thermal diffusion time constants of the conventional heaters are larger than the duration of the actual disturbance, because of these electrical insulator of the heating wire and the epoxy bind. Therefore, this kind of heater is not able to demonstrate the actual disturbance. To solve this problem, they have proposed a new constitution of a heater. In the method, heat generation is introduced in high resistive layer on a surface of a superconducting wire. The high resistive layer is consist of carbon paste. The thickness of the carbon paste layer is ∼20microm, thus a time constant of this heater is expected to be small enough to demonstrate the actual disturbance. Adopting the new method to the MQE measurement, they successfully evaluate MQE of superconducting wires with high precision. Several results are introduced in this paper

  7. An analysis of energy conservation measure costs

    International Nuclear Information System (INIS)

    Jones, R.; Ellis, R.; Gellineau, D.

    1990-01-01

    This paper reports on a Denver Support Office project to evaluate cost estimation in the Institutional Conservation Program. Unit cost characteristics and cost prediction accuracy were evaluated from 1,721 Energy Conservation Measures (ECMs) and 390 Technical Assistance (TA) reports funded in the last six years. This information is especially useful to state and DOE review engineers in determining the reasonableness of future cost estimates. The estimated cost provisions for TA report grants were generally adequate to cover the actual costs. Individually, there was a tendency for TA reports to cost less than estimated by about 10%. TA report unit costs averaged $.09 to $.11 per square foot, and decreased as the building size increased. Individually, there was a tendency for ECMs to cost more than estimated by about 17%. Overall, the estimated costs of the 1,721 measures were $20.4 minion, while the actual costs were $21.4 million. This 4.6% difference indicates that, overall, ECM cost estimates have provided a reasonable basis for grant awards. There was a high variation in ECM unit costs. The data did not support speculation that there is a tendency to manipulate cost estimates to fit ECMs within the simple payback eligibility criteria of 2 to 10 years

  8. Energy performance contracting - energy saving potential of selected energy conservation measures (ECM)

    Energy Technology Data Exchange (ETDEWEB)

    Johansson, M. (Dansk Energi Analyse A/S, Frederiksberg (Denmark)); Langkilde, G.; Olesen, Bjarne W. (Technical Univ. of Denmark, ICIEE, Kgs. Lyngby (Denmark)); Moerck, O. (Cenergia Energy Consultants, Herlev (Denmark)); Sundman, O. (DONG Energy, Copenhagen (Denmark)); Engelund Thomsen, K. (Aalborg Univ., SBi, Hoersholm (Denmark))

    2008-09-15

    This report has been developed under the research project 'Etablering af grundlag for energitjenester i Danmark' (project number: ENS-33031-0185) under the Danish research programme - EFP. The objective of this project has been to contribute to the utilisation of the large potential for energy conservations in the building sector within the public, industry and service sectors through the development of a better basis for decision making for both the Energy Service Companies (ESCOes) and the building owners. The EU directive on Energy Service Contracting points at the buildings as the area where the biggest potential market for energy services and energy efficiency improvements are. The EFP-project has two parts: (1) A Danish part and (2) participation in the international cooperation project 'Holistic Assesment Tool-Kit on Energy Efficient Retrofit Measures for Government Buildings (EnERGo)', Annex 46 under the IEA R and D program 'Energy Conservation In Buildings And Community Systems' (ECBCS). This report describes the Danish contributions to the IEA projects subtask B, which has a primary objective to develop a database of energy conservation measures (ECM) with descriptions and performance characteristics of these. (au)

  9. Measuring energy security. A conceptual note

    Energy Technology Data Exchange (ETDEWEB)

    Frondel, Manuel; Schmidt, Christoph M.

    2008-11-06

    Along with the oil price, concerns about the security of energy supply have soared once again in recent years.Yet, more than 30 years after the OPEC oil embargo in 1973, energy security still remains a diffuse concept. This paper conceives a statistical indicator that aims at characterizing the energy supply risk of nations that are heavily dependent on energy imports. Our indicator condenses the bulk of empirical information on the imports of fossil fuels originating from a multitude of export countries as well as data on the indigenous contribution to the domestic energy supply into a single parameter. Applying the proposed concept to empirical energy data on Germany and the U.S. (1980-2004), we find that there is a large gap in the energy supply risks between both countries, with Germany suffering much more from a tensed energy supply situation today than the U.S. (orig.)

  10. Lobbying and Related Reform Proposals: Consideration of Selected Measures, 109th Congress

    National Research Council Canada - National Science Library

    Petersen, R. E

    2006-01-01

    .... These measures are S. 2349, the Legislative Transparency and Accountability Act of 2006, introduced by Senator Trent Lott and reported to the Senate by the Committee on Rules and Administration on February 28, 2006...

  11. Implementation and rejection of industrial steam system energy efficiency measures

    International Nuclear Information System (INIS)

    Therkelsen, Peter; McKane, Aimee

    2013-01-01

    Steam systems consume approximately one third of energy applied at US industrial facilities. To reduce energy consumption, steam system energy assessments have been conducted on a wide range of industry types over the course of 5 years through the Energy Savings Assessment (ESA) program administered by the US Department of Energy (US DOE). ESA energy assessments result in energy efficiency measure recommendations that are given potential energy and energy cost savings and potential implementation cost values. Saving and cost metrics that measure the impact recommended measures will have at facilities, described as percentages of facility baseline energy and energy cost, are developed from ESA data and used in analyses. Developed savings and cost metrics are examined along with implementation and rejection rates of recommended steam system energy efficiency measures. Based on analyses, implementation of steam system energy efficiency measures is driven primarily by cost metrics: payback period and measure implementation cost as a percentage of facility baseline energy cost (implementation cost percentage). Stated reasons for rejecting recommended measures are primarily based upon economic concerns. Additionally, implementation rates of measures are not only functions of savings and cost metrics, but time as well. - Highlights: ► We examine uptake/rejection of industrial steam system energy efficiency measures. ► We examine metrics that correspond to uptake/rejection of recommended measures. ► We examine barriers hindering steam system energy efficiency measure implementation. ► Uptake/rejection of steam measures is linked to potential cost metrics. ► Increased uptake of measures and uptake of more costly measures increases with time

  12. Implementation and Rejection of Industrial Steam System Energy Efficiency Measures

    Energy Technology Data Exchange (ETDEWEB)

    Therkelesen, Peter [Environmental Energy Technologies Division Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); McKane, Aimee [Environmental Energy Technologies Division Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)

    2013-05-01

    Steam systems consume approximately one third of energy applied at U.S. industrial facilities. To reduce energy consumption, steam system energy assessments have been conducted on a wide range of industry types over the course of five years through the Energy Savings Assessment (ESA) program administered by the U.S. Department of Energy (U.S. DOE). ESA energy assessments result in energy efficiency measure recommendations that are given potential energy and energy cost savings and potential implementation cost values. Saving and cost metrics that measure the impact recommended measures will have at facilities, described as percentages of facility baseline energy and energy cost, are developed from ESA data and used in analyses. Developed savings and cost metrics are examined along with implementation and rejection rates of recommended steam system energy efficiency measures. Based on analyses, implementation of steam system energy efficiency measures is driven primarily by cost metrics: payback period and measure implementation cost as a percentage of facility baseline energy cost (implementation cost percentage). Stated reasons for rejecting recommended measures are primarily based upon economic concerns. Additionally, implementation rates of measures are not only functions of savings and cost metrics, but time as well.

  13. Sentinels Guarding the Grail: Value-Added Measurement and the Quest for Education Reform

    Science.gov (United States)

    Gabriel, Rachael; Lester, Jessica Nina

    2013-01-01

    Since the beginning of the federal Race To The Top grant competition, Value-Added Measurement (VAM) has captured the attention of the American public through high-profile media representations of the tool and the controversy that surrounds it. In this paper, we build upon investigations of constructions of VAM in the media and present a discourse…

  14. Analyzing the Effects of the Iranian Energy Subsidy Reform Plan on Short- Run Marginal Generation Cost of Electricity Using Extended Input-Output Price Model

    Directory of Open Access Journals (Sweden)

    Zohreh Salimian

    2012-01-01

    Full Text Available Subsidizing energy in Iran has imposed high costs on country's economy. Thus revising energy prices, on the basis of a subsidy reform plan, is a vital remedy to boost up the economy. While the direct consequence of cutting subsidies on electricity generation costs can be determined in a simple way, identifying indirect effects, which reflect higher costs for input factors such as labor, is a challenging problem. In this paper, variables such as compensation of employees and private consumption are endogenized by using extended Input-Output (I-O price model to evaluate direct and indirect effects of electricity and fuel prices increase on economic subsectors. The determination of the short-run marginal generation cost of electricity using I-O technique with taken into account the Iranian targeted subsidy plan's influences is the main goal of this paper. Marginal cost of electricity, in various scenarios of price adjustment of energy, is estimated for three conventional categories of thermal power plants. Our results show that the raising the price of energy leads to an increase in the electricity production costs. Accordingly, the production costs will be higher than 1000 Rials per kWh until 2014 as predicted in the beginning of the reform plan by electricity suppliers.

  15. Parliamentary Reform

    OpenAIRE

    Norton, Philip

    2016-01-01

    The key concept of any study of the role of Parliament focuses on the extent to which it is able to influence and constrain the Executive. Reforming Parliament should seek to strengthen its capacity to do so. A clear distinction ought to be drawn between external and internal reforms of the Parliamentary system. While the former strive to achieve the desired goal through changes in the constitutional framework – e.g. the reform of the House of Lords – the latter aim to improve the working of ...

  16. Procedure for Measuring and Reporting Commercial Building Energy Performance

    Energy Technology Data Exchange (ETDEWEB)

    Barley, D.; Deru, M.; Pless, S.; Torcellini, P.

    2005-10-01

    This procedure is intended to provide a standard method for measuring and characterizing the energy performance of commercial buildings. The procedure determines the energy consumption, electrical energy demand, and on-site energy production in existing commercial buildings of all types. The performance metrics determined here may be compared against benchmarks to evaluate performance and verify that performance targets have been achieved.

  17. Household preferences for energy-saving measures : A conjoint analysis

    NARCIS (Netherlands)

    Poortinga, Wouter; Steg, Linda; Vlek, Charles; Wiersma, Gerwin

    Studies on household energy use generally focus on social and psychological factors influencing the acceptability of energy-saving measures. However, the influence of physical characteristics of energy-saving measures on their acceptability is largely ignored. In this study, preferences for

  18. Security Sector Reform in Albania

    OpenAIRE

    Abazi, Enika; Bumci, Aldo; Hide, Enri; Rakipi, Albert

    2009-01-01

    International audience; This paper analyses security sector reform (SSR) in Albania. In all its enterprises in reforming the security sector,Albania is assisted by different initiatives and projects that provide expertise and financial support. To assesswhether reforms improved the overall security environment (national and human) of the country, it is necessaryto measure the effectiveness of the various initiatives and projects. This is gauged by how well the initiatives andprojects achieved...

  19. Evidence of students' content reasoning in relation to measure of reform

    Science.gov (United States)

    Haghanikar, Mojgan Matloob; Murphy, Sytil; Zollman, Dean

    2012-02-01

    As part of a study of the science preparation of elementary school teachers, we investigated the quality of students' reasoning and explored the relationship between sophistication of reasoning and the degree to which the courses are considered inquiry oriented. First, we devised written content questions, which were open ended with the distinguishing feature of applying recently learned concepts in a new context. All the questions developed were based on a common template that required students to recognize and generalize the relevant facts or concepts and their interrelationships to suggest an applicable or plausible theory. To evaluate students' answers, we developed a rubric based on Bloom's taxonomy as revised and expanded by Anderson. Along with analyzing students' reasoning, we visited 20 universities and observed the courses in which the students were enrolled. We ranked the courses with respect to characteristics that are valued for the inquiry courses. With the large amount of collected data, we found that the likelihood of the higher cognitive processes are in favor of classes with higher measures of inquiry.

  20. Development of a methanol fuelled reformer for fuel cell applications

    Science.gov (United States)

    Lindström, Bård; Pettersson, Lars J.

    A compact methanol reformer for fuel cell vehicles (FCVs) has been developed and successfully tested. The reformer which has been constructed to serve a 5 kWe fuel cell operates by combined reforming of methanol (CRM) (a combination of steam reforming and partial oxidation). The exploitable energy surplus in a fuel cell vehicle is low and therefore a combustion system for heating the reformer which utilizes a catalyst for both evaporation and oxidation of liquid methanol was developed. We were able to obtain start-up times in the region of 4-6 min depending on the oxygen-to-methanol ratio (OMR) used for the combined reforming reaction. The main drawback from decreasing the start-up time by increasing the oxygen-to-methanol ratio was that the CO concentrations in the product stream increased. The reforming reaction was performed over copper-based catalysts while the oxidation took place over a mixture of platinum and manganese-based catalysts. The catalysts were characterized using SEM-EDS, BET surface area measurement and X-ray diffraction (XRD).

  1. Energy upgrading measures improve also indoor climate

    DEFF Research Database (Denmark)

    Foldbjerg, Peter; Knudsen, Henrik Nellemose

    2014-01-01

    A new survey shows that the economy is what motivates Danish owners of single-family houses the most to start energy upgrading, and that improved indoor climate is also an important factor. After the upgrading, homeowners experience both improved economy and indoor climate. In a strategy to incre......A new survey shows that the economy is what motivates Danish owners of single-family houses the most to start energy upgrading, and that improved indoor climate is also an important factor. After the upgrading, homeowners experience both improved economy and indoor climate. In a strategy...... to increase the number of homeowners who venture into a major energy upgrading of their house, the demonstrated positive side effects, more than energy savings, should be included in the communication to motivate homeowners. The barriers should be reduced by “taking the homeowners by the hand” and helping...... them to choose relevant energy-saving solutions as well as clarifying the financial consequences and opportunities....

  2. Administrative Reform

    DEFF Research Database (Denmark)

    Plum, Maja

    Through the example of a Danish reform of educational plans in early childhood education, the paper critically addresses administrative educational reforms promoting accountability, visibility and documentation. Drawing on Foucaultian perspectives, the relation between knowledge and governing...... of administrative technology, tracing how the humanistic values of education embed and are embedded within ‘the professional nursery teacher' as an object and subject of administrative practice. Rather than undermining the humanistic potential of education, it is argued that the technology of accounting...

  3. Reform and Backlash to Reform

    DEFF Research Database (Denmark)

    Hougaard Jensen, Svend E.; Hagen Jørgensen, Ole

    Using a stochastic general equilibrium model with overlapping generations, this paper studies (i) the effects on both extensive and intensive labor supply responses to changes in fertility rates, and (ii) the potential of a retirement reform to mitigate the effects of fertility changes on labor...... supply. In order to neutralize the effects on effective labor supply of a fertility decline, a retirement reform, designed to increase labor supply at the extensive margin, is found to simultaneously reduce labor supply at the intensive margin. This backlash to retirement reform requires the statutory...

  4. Solar energy control system. [temperature measurement

    Science.gov (United States)

    Currie, J. R. (Inventor)

    1981-01-01

    A solar energy control system for a hot air type solar energy heating system wherein thermocouples are arranged to sense the temperature of a solar collector, a space to be heated, and a top and bottom of a heat storage unit is disclosed. Pertinent thermocouples are differentially connected together, and these are employed to effect the operation of dampers, a fan, and an auxiliary heat source. In accomplishing this, the differential outputs from the thermocouples are amplified by a single amplifier by multiplexing techniques. Additionally, the amplifier is corrected as to offset by including as one multiplex channel a common reference signal.

  5. Measuring the sustainability of energy systems

    International Nuclear Information System (INIS)

    Kroger, W.

    2001-01-01

    Today's energy policies are characterised by a contradictory position. In theory, there is a clear will to respond to emerging threats, e.g. evidence of man-made climate change, irresponsible use of limited resources, geopolitical discrepancies with unbalanced satisfaction of vital needs. In practice, decision making is dominated by economic competitiveness and maximization of short-term profit. The use of fossil fuels is unbroken and still increasing. A recent Green Paper concluded that the EU countries have to reduce growing structural weaknesses by limiting dependence on fuel imports and to give priority to energy systems that do not emit global warming gases. (authors)

  6. Contract Reform Self Assessment Report

    National Research Council Canada - National Science Library

    1997-01-01

    The primary objective of this self assessment is to report on the Department of Energy's progress in implementing the Contract Reform initiative launched in February 1994 and to discuss remaining challenges...

  7. Aircraft Measurements of Atmospheric Kinetic Energy Spectra

    DEFF Research Database (Denmark)

    Lundtang Petersen, Erik; Lilly, D. K.

    1983-01-01

    Wind velocity data obtained from a jet airliner are used to construct kinetic energy spectra over the range of wavelengths from 2.5 to 2500 km. The spectra exhibit an approximate -5/3 slope for wavelengths of less than about 150 km, steepening to about -2.2 at larger scales. These results support...

  8. Energy pricing policy in Iran

    International Nuclear Information System (INIS)

    Davood Manzoor

    1995-01-01

    Low energy prices in Iran do not reflect economic costs. Further distortions exist in the tariff structures of most energy sources and in their relative prices. Price reform is a key policy element for achieving increased energy conservation and economic substitution. Subsidies should be made transparent and explained by the Government, and, when eliminated, they could be compensated by target measures or direct subsidies for low income households. Price reforms are under way, with some caution though, because of possible political and inflationary consequences. In order to better understand the need for price reforms a brief analysis of the current energy pricing policy is provided there. (author)

  9. DCARR: a spectrograph for measuring low-energy x rays

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    DCARR, the Differential Critical Angle Reflection Refraction detector system, is described. This detector was designed to measure low-energy x rays, 500 to 5000 eV, with a high degree of resolution, 250 eV. DCARR was developed because these low-energy measurements are of interest in the diagnostics of x-radiation in nuclear tests and available equipment could not make measurements at this low an energy in field tests. DCARR is a versatile piece of equipment that can also be used as a laboratory tool, such as in measuring the low-energy x rays emitted by lasers and various x-ray machines

  10. Upgrading versus reforming: an energy and exergy analysis of two Solid Oxide Fuel Cell-based systems for a convenient biogas-to-electricity conversion

    International Nuclear Information System (INIS)

    Baldinelli, A.; Barelli, L.; Bidini, G.

    2017-01-01

    Highlights: • Biogas-to-electricity conversion through Solid Oxide Fuel Cell is investigated. • Two solutions are compared for biogas-to-electricity conversion. • Direct feeding by partially upgraded biogas meets with fuel cell long operation. • Best energy and exergy performances are obtained with an innovative system-design. • A sensitivity analysis on the process parameters determines its convenience margin. - Abstract: Aiming at designing biogas-to-electricity advanced systems, Solid Oxide Fuel Cells are promising candidates. They benefit from scalability on plant sizes that suit anaerobic digesters potentialities. For biogas-Solid Oxide Fuel Cells applications, the implementation of an external pre-reformer is usually considered. However, the possibility to perform direct fuel feeding to the Solid Oxide Fuel Cell offers new opportunities towards the realization of lean systems, which are competitive especially on small-scale installations (i.e. on-farm biogas-to-electricity conversion). In this frame, scientific literature is rather poor and, to cover this gap, system simulations are called for two reasons: first, to demonstrate the potential efficiency gain of new concepts; second, to provide a meaningful support for long-term experimental investigation on Solid Oxide Fuel Cells operated upon direct feeding of unreformed biogas. For that, the current study compares two system designs for biogas utilization into Solid Oxide Fuel Cells. The conventional one realizes biogas steam reforming prior the fuel cell, while the novel concept is based on direct feeding of partially upgraded biogas by means of carbon dioxide-separation membranes. As main outcome of the study, the system equipped with carbon dioxide-separation membranes achieves better performances than its conventional competitor does, scoring 51.1% energy efficiency and 52.3% exergy efficiency (compared to 37.2% and 38.6% respectively exhibited by the reformer-based system). Because of the lack

  11. Lidar Turbulence Measurements for Wind Energy

    DEFF Research Database (Denmark)

    Mann, Jakob; Sathe, Ameya; Gottschall, Julia

    2012-01-01

    Modeling of the systematic errors in the second-order moments of wind speeds measured by continuous-wave (ZephIR) and pulsed (WindCube) lidars is presented. These lidars use the velocity azimuth display technique to measure the velocity vector. The model is developed for the line-of-sight averaging...

  12. Lidar Turbulence Measurements for Wind Energy

    DEFF Research Database (Denmark)

    Mann, Jakob; Sathe, Ameya; Gottschall, Julia

    2012-01-01

    Modeling of the systematic errors in the second-order moments of wind speeds measured by continuous-wave (ZephIR) and pulsed (WindCube) lidars is presented. These lidars use the velocity azimuth display technique to measure the velocity vector. The model is developed for the line-of-sight averagi...

  13. Measurement of energy efficiency based on economic foundations

    International Nuclear Information System (INIS)

    Filippini, Massimo; Hunt, Lester C.

    2015-01-01

    Energy efficiency policy is seen as a very important activity by almost all policy makers. In practical energy policy analysis, the typical indicator used as a proxy for energy efficiency is energy intensity. However, this simple indicator is not necessarily an accurate measure given changes in energy intensity are a function of changes in several factors as well as ‘true’ energy efficiency; hence, it is difficult to make conclusions for energy policy based upon simple energy intensity measures. Related to this, some published academic papers over the last few years have attempted to use empirical methods to measure the efficient use of energy based on the economic theory of production. However, these studies do not generally provide a systematic discussion of the theoretical basis nor the possible parametric empirical approaches that are available for estimating the level of energy efficiency. The objective of this paper, therefore, is to sketch out and explain from an economic perspective the theoretical framework as well as the empirical methods for measuring the level of energy efficiency. Additionally, in the second part of the paper, some of the empirical studies that have attempted to measure energy efficiency using such an economics approach are summarized and discussed.

  14. Tax Reform and Environmental Taxation

    OpenAIRE

    Gilbert E. Metcalf

    2005-01-01

    I measure the industry impacts of an environmental tax reform where a carbon tax is used to finance full or partial corporate tax integration. I find that the industry impacts of such a reform are likely to be modest (in the sense of impacts on returns on equity).

  15. Free Speech and Campaign Reform.

    Science.gov (United States)

    Sharp, Harry, Jr.

    The Federal Election Campaign Act of 1971, a political campaign reform measure, was enacted to limit campaign contributions and independent expenditures, to mandate disclosure of contributors, and to establish public financing of campaigns, all to minimize the opportunity for political corruption. Unfortunate implications of such reform on the…

  16. High Energy Measurement of the Deuteron Photodisintegration Differential Cross Section

    Energy Technology Data Exchange (ETDEWEB)

    Schulte, Elaine [Univ. of Illinois, Urbana-Champaign, IL (United States)

    2002-05-01

    New measurements of the high energy deuteron photodisintegration differential cross section were made at the Thomas Jefferson National Accelerator Facility in Newport News, Virginia. Two experiments were performed. Experiment E96-003 was performed in experimental Hall C. The measurements were designed to extend the highest energy differential cross section values to 5.5 GeV incident photon energy at forward angles. This builds upon previous high energy measurements in which scaling consistent with the pQCD constituent counting rules was observed at 90 degrees and 70 degrees in the center of mass. From the new measurements, a threshold for the onset of constituent counting rule scaling seems present at transverse momentum approximately 1.3 GeV/c. The second experiment, E99-008, was performed in experimental Hall A. The measurements were designed to explore the angular distribution of the differential cross section at constant energy. The measurements were made symmetric about 90 degrees

  17. Measuring energy efficiency in the United States` economy: A beginning

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    Energy efficiency is a vital component of the Nation`s energy strategy. One of the Department of Energy`s missions are to promote energy efficiency to help the Nation manage its energy resources. The ability to define and measure energy efficiency is essential to this objective. In the absence of consistent defensible measures, energy efficiency is a vague, subjective concept that engenders directionless speculation and confusion rather than insightful analysis. The task of defining and measuring energy efficiency and creating statistical measures as descriptors is a daunting one. This publication is not a final product, but is EIA`s first attempt to define and measure energy efficiency in a systematic and robust manner for each of the sectors and the United States economy as a whole. In this process, EIA has relied on discussions, customer reviews, in-house reviews, and seminars that have focused on energy efficiency in each of the sectors. EIA solicits the continued participation of its customers in further refining this work.

  18. Impact of the Local Public Hospital Reform on the Efficiency of Medium-Sized Hospitals in Japan: An Improved Slacks-Based Measure Data Envelopment Analysis Approach.

    Science.gov (United States)

    Zhang, Xing; Tone, Kaoru; Lu, Yingzhe

    2018-04-01

    To assess the change in efficiency and total factor productivity (TFP) of the local public hospitals in Japan after the local public hospital reform launched in late 2007, which was aimed at improving the financial capability and operational efficiency of hospitals. Secondary data were collected from the Ministry of Internal Affairs and Communications on 213 eligible medium-sized hospitals, each operating 100-400 beds from FY2006 to FY2011. The improved slacks-based measure nonoriented data envelopment analysis models (Quasi-Max SBM nonoriented DEA models) were used to estimate dynamic efficiency score and Malmquist Index. The dynamic efficiency measure indicated an efficiency gain in the first several years of the reform and then was followed by a decrease. Malmquist Index analysis showed a significant decline in the TFP between 2006 and 2011. The financial improvement of medium-sized hospitals was not associated with enhancement of efficiency. Hospital efficiency was not significantly different among ownership structure and law-application system groups, but it was significantly affected by hospital location. The results indicate a need for region-tailored health care policies and for a more comprehensive reform to overcome the systemic constraints that might contribute to the decline of the TFP. © Health Research and Educational Trust.

  19. The argentine electric sector reform and its correlation with energy efficiency; La reforma del sector electrico argentino y su relacion con la eficiencia energetica

    Energy Technology Data Exchange (ETDEWEB)

    Carpio, Claudio [MGM International (Argentina)

    2005-04-15

    The reforms in the Argentine electrical sector and the effect these have originated in the energy efficiency policies for public sector are presented. The characteristics exposed of the Argentina Electric sector previous to the 1992 transformation are the departing base that gave rise to the reform fundaments, generating privatizations and a vertical economic scheme. The transformation of the electric sector departing from its environmental regulations yielded in a quality service, good electricity distribution, better prices and proper energy efficiency. [Spanish] Se presentan las reformas en el sector electrico argentino y el efecto que han tenido sobre las politicas de eficiencia energetica elaboradas en el sector publico. Las caracteristicas expuestas del sector electrico argentino previas a la transformacion de 1992 son la base de partida que dio lugar a los fundamentos de la reforma generando privatizaciones y un esquema economico vertical. La transformacion del sector electrico a partir de sus regulaciones energeticas y ambientales redituaron en calidad de servicio, de distribucion de electricidad, precios y en la propia eficiencia energetica.

  20. Potential social, institutional, and environmental impacts of selected energy-conservation measures in two Washington communities. [Seattle and Yakima

    Energy Technology Data Exchange (ETDEWEB)

    Edelson, E.; Olsen, M.

    1980-03-01

    The likely environmental, social, and institutional impacts of selected energy-conservation measures in two communities in Washington state are reported. The five conservation measures investigated in this study were: (1) retrofitting existing buildings; (2) district heating and Integrated Community Energy Systems (ICES); (3) small automobiles and vehicle redesign; (4) land-use and housing modifications; and (5) electric-utility rate reform. Twenty potential impact areas were selected for analysis. These areas were divided into five categories of environmental impacts, economic impacts, community impacts, personal impacts, and overall quality of life in the community. The research was conducted in Seattle and Yakima, Washington. In each location, about two dozen public officials and business, labor, and community leaders were interviewed. Their diverse views are summarized. The Seattle respondents saw energy conservation as a highly desirable policy with a number of temporary, transitional problems arising as energy-conservation measures were implemented. Yakima respondents, in contrast, did not expect to encounter many serious energy problems in the foreseeable future and consequently viewed energy conservation as a relatively minor community concern. Moreover, they anticipated that many conservation measures, if implemented by the government, would encounter either apathy or resistance in their community. Two broad generalizations can bedrawn from these interviews: (1) energy conservation will basically be beneficial for the natural environment and our society; and (2) if energy conservation does become a dominant thrust in our society, it could stimulate and reinforce a much broader process of fundamental social change. (LCL)

  1. Administrative Reform

    DEFF Research Database (Denmark)

    Plum, Maja

    Through the example of a Danish reform of educational plans in early childhood education, the paper critically addresses administrative educational reforms promoting accountability, visibility and documentation. Drawing on Foucaultian perspectives, the relation between knowledge and governing......, implied in the reform, is analysed as a technology of accounting. A technology producing ‘the professional nursery teacher' as a reflective daily researcher, who outlives her pedagogical desire as an analytical care of the optimisation of ‘the learning child'. Thus, the paper analyses the micro physics...... of administrative technology, tracing how the humanistic values of education embed and are embedded within ‘the professional nursery teacher' as an object and subject of administrative practice. Rather than undermining the humanistic potential of education, it is argued that the technology of accounting...

  2. Energy-saving measures in multi-storage housing construction

    Directory of Open Access Journals (Sweden)

    Мария Дмитриевна Коровина

    2017-05-01

    Full Text Available In this article the main directions of energy saving in multi-storey housing construction and methods for increasing energy efficiency are considered. The main problems of implementing energy-saving measures were touched; the need for their analysis during the development of each construction project with a view to choosing the most effective complex from the energy, economic, ecological and social points of view was justified. It is noted that such an approach can become an important factor of saving energy in the sphere of housing construction and reducing the energy intensity of the entire Russian economy.

  3. Availability-based payback method for energy efficiency measures

    OpenAIRE

    Kasprowicz, Robert; Schulz, Carolin

    2015-01-01

    Energy-efficient technologies can lead to high energy and monetary savings in numerous industries. However, a lot of potential identified in industries remains untapped due to comparatively short requested payback periods. Usually, companies base the calculation of their payback period on initial investment costs in conjunction with annual monetary energy savings. Energy efficiency measures, however, often lead to synergy effects which are not taken into account. Against this background, we i...

  4. Neutron Energy Measurements in Radiological Emergency Response Applications

    Energy Technology Data Exchange (ETDEWEB)

    Sanjoy Mukhopadhyay, Paul Guss, Michael Hornish, Scott Wilde, Tom Stampahar, Michael Reed

    2009-04-30

    We present significant results in recent advances in the determination of neutron energy. Neutron energy measurements are a small but very significant part of radiological emergency response applications. Mission critical information can be obtained by analyzing the neutron energy given off from radioactive materials. In the case of searching for special nuclear materials, neutron energy information from an unknown source can be of paramount importance.

  5. Energy Intake Estimates of Respondent-Measured Alcoholic Beverages

    OpenAIRE

    Tujague, Jennifer; Kerr, William C.

    2008-01-01

    Aim: The aim of this study was to demonstrate a methodology for estimating detailed energy intake from alcoholic beverages. Methods: Participants were 315 monthly drinkers who completed a drink-measuring exercise. Energy intake from alcohol and non-alcohol ingredients was calculated for all beverages consumed. Results: Measured alcoholic beverages had on average 140 kilocalories, with 26% of the energy coming from non-alcohol ingredients. The average monthly kilocalorie intake, from all alcoh...

  6. Slab reformer

    Science.gov (United States)

    Spurrier, Francis R. (Inventor); DeZubay, Egon A. (Inventor); Murray, Alexander P. (Inventor); Vidt, Edward J. (Inventor)

    1985-01-01

    Slab-shaped high efficiency catalytic reformer configurations particularly useful for generation of fuels to be used in fuel cell based generation systems. A plurality of structures forming a generally rectangular peripheral envelope are spaced about one another to form annular regions, an interior annular region containing a catalytic bed and being regeneratively heated on one side by a hot combustion gas and on the other side by the gaseous products of the reformation. An integrally mounted combustor is cooled by impingement of incoming oxidant.

  7. Slab reformer

    Science.gov (United States)

    Spurrier, Francis R.; DeZubay, Egon A.; Murray, Alexander P.; Vidt, Edward J.

    1984-02-07

    Slab-shaped high efficiency catalytic reformer configurations particularly useful for generation of fuels to be used in fuel cell based generation systems. A plurality of structures forming a generally rectangular peripheral envelope are spaced about one another to form annular regions, an interior annular region containing a catalytic bed and being regeneratively heated on one side by a hot comubstion gas and on the other side by the gaseous products of the reformation. An integrally mounted combustor is cooled by impingement of incoming oxidant.

  8. Telecom Reform

    DEFF Research Database (Denmark)

    and information infrastructure issues - for people in government, academia, industry and the consulting community. This book addresses the process of policy and regulatory reform in telecom that is now in its formative stage. It draws on detailed knowledge of industry development and regulatory experience......, as well as expertise in the new technologies, industries, economics, policy development, and law to present and critique the principles, policies and regulatory practices associated with telecom reform. Twenty six international experts address thirty two topics that are essential to successful telecom...

  9. Measurement of Energy Performances for General-Structured Servers

    Science.gov (United States)

    Liu, Ren; Chen, Lili; Li, Pengcheng; Liu, Meng; Chen, Haihong

    2017-11-01

    Energy consumption of servers in data centers increases rapidly along with the wide application of Internet and connected devices. To improve the energy efficiency of servers, voluntary or mandatory energy efficiency programs for servers, including voluntary label program or mandatory energy performance standards have been adopted or being prepared in the US, EU and China. However, the energy performance of servers and testing methods of servers are not well defined. This paper presents matrices to measure the energy performances of general-structured servers. The impacts of various components of servers on their energy performances are also analyzed. Based on a set of normalized workload, the author proposes a standard method for testing energy efficiency of servers. Pilot tests are conducted to assess the energy performance testing methods of servers. The findings of the tests are discussed in the paper.

  10. ICT energy efficiency in higher education. Continuous measurement and monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Ter Hofte, H. [Novay, Enschede (Netherlands)

    2011-11-15

    Power consumption of information and communications technology (ICT) is rising rapidly worldwide. Reducing (the growth in) energy demand helps to achieve sustainability goals in the area of energy resource depletion, energy security, economy, and ecology. Various governments and industry consortia have set out policies and agreements to reduce the (growth in) demand for energy. In the MJA3 agreements in the Netherlands, various organizations, including all 14 universities and 39 universities of applied sciences pledged to achieve 30% increase in energy efficiency in 2020 compared to 2005. In this report, we argue that using the number of kilowatt-hours of final electricity used for ICT per enrolled student per day (kWh/st/d), should be used as the primary metric for ICT energy efficiency in higher education. For other uses of electricity than ICT in higher education, we express electricity use in kilowatthours per person per day (kWh/p/d). Applying continuous monitoring and management of ICT energy is one approach one could take to increase ICT energy efficiency in education. In households, providing direct (i.e. real-time) feedback about energy use typically results in 5-15% energy savings, whereas indirect feedback (provided some time after consumption occurs), results in less energy savings, typically 0-10%. Continuous measurement of ICT electricity use can be done in a variety of ways. In this report, we distinguish and describe four major measurement approaches: (1) In-line meters, which require breaking the electrical circuit to install the meter; (2) clamp-on-meters, which can be wrapped around a wire; (3) add-ons to existing energy meters, which use analog or digital ports of existing energy meters; (4) software-only measurement, which uses existing network interfaces, protocols and APIs. A measurement approach can be used at one or more aggregation levels: at building level (to measure all electrical energy used in a building, e.g. a datacenter); at

  11. System Energy Assessment (SEA, Defining a Standard Measure of EROI for Energy Businesses as Whole Systems

    Directory of Open Access Journals (Sweden)

    Jay Zarnikau

    2011-10-01

    Full Text Available A more objective method for measuring the energy needs of businesses, System Energy Assessment (SEA, measures the combined impacts of material supply chains and service supply chains, to assess businesses as whole self-managing net-energy systems. The method is demonstrated using a model Wind Farm, and defines a physical measure of their energy productivity for society (EROI-S, a ratio of total energy delivered to total energy expended. Energy use records for technology and proxy measures for clearly understood but not individually recorded energy uses for services are combined for a whole system estimate of consumption required for production. Current methods count only energy needs for technology. Business services outsource their own energy needs to operate, leaving no traceable record. That uncounted business energy demand is often 80% of the total, an amount of “dark energy” hidden from view, discovered by finding the average energy estimated needs for businesses far below the world average energy consumed per dollar of GDP. Presently for lack of information the energy needs of business services are counted to be “0”. Our default assumption is to treat them as “average”. The result is a hard measure of total business demand for energy services, a “Scope 4” energy use or GHG impact assessment. Counting recorded energy uses and discounting unrecorded ones misrepresents labor intensive work as highly energy efficient. The result confirms a similar finding by Hall et al. in 1981 [1]. We use exhaustive search for what a business needs to operate as a whole, tracing internal business relationships rather than energy data, to locate its natural physical boundary as a working unit, and so define a business as a physical rather than statistical subject of scientific study. See also online resource materials and notes [2].

  12. Sensitivity analysis and energy conservation measures implications

    International Nuclear Information System (INIS)

    Lam, Joseph C.; Wan, Kevin K.W.; Yang Liu

    2008-01-01

    Electricity use characteristics of 10 air-conditioned office buildings in subtropical Hong Kong were investigated. Monthly electricity consumption data were gathered and analysed. The annual electricity use per unit gross floor area ranged from 233 to 368 kWh/m 2 , with a mean of 292 kWh/m 2 . The ranges of percentage consumption for the four major electricity end-users - namely heating, ventilation and air-conditioning (HVAC), lighting, electrical equipment, and lifts and escalators - were 40.1-50.7%, 22.1-29%, 16.6-32.9% and 2.2-5.3%, respectively. Ten key design variables were identified in the parametric and sensitivity analysis using building energy simulation technique. Analysis of the resulting influence coefficients suggested that indoor design condition (from 22 to 25.5 deg. C), electric lighting (a modest 2 W/m 2 reduction in the current lighting code) and chiller COP (from air- to water-cooled) could offer great electricity savings potential, in the order of 14%, 5.2% and 11%, respectively

  13. Research and Construction of DC Energy Measurement Traceability Technology

    Science.gov (United States)

    Zhi, Wang; Maotao, Yang; Jing, Yang

    2018-02-01

    With the implementation of energy saving and emission reduction policies, DC energy metering has been widely used in many fields. In view of the lack of a DC energy measurementtraceability system, in combination with the process of downward measurement transfer in relation to the DC charger-based field calibration technology and DC energy meter and shunt calibration technologies, the paper proposed DC fast charging, high DC, small DC voltage output and measuring technologies, and built a time-based plan by converting high DC voltage into low voltage and high current into low current and then into low voltage, leaving DC energy traceable to national standards in terms of voltage, current and time and thus filling in the gap in DC energy measurement traceability.

  14. Energy storage cell impedance measuring apparatus, methods and related systems

    Science.gov (United States)

    Morrison, John L.; Morrison, William H.; Christophersen, Jon P.

    2017-12-26

    Energy storage cell impedance testing devices, circuits, and related methods are disclosed. An energy storage cell impedance measuring device includes a sum of sinusoids (SOS) current excitation circuit including differential current sources configured to isolate a ground terminal of the differential current sources from a positive terminal and a negative terminal of an energy storage cell. A method includes applying an SOS signal comprising a sum of sinusoidal current signals to the energy storage cell with the SOS current excitation circuit, each of the sinusoidal current signals oscillating at a different one of a plurality of different frequencies. The method also includes measuring an electrical signal at a positive terminal and a negative terminal of the energy storage cell, and computing an impedance of the energy storage cell at each of the plurality of different frequencies using the measured electrical signal.

  15. Plasma-catalytic reforming of ethanol: influence of air activation rate and reforming temperature

    International Nuclear Information System (INIS)

    Nedybaliuk, O.A.; Chernyak, V.Ya.; Fedirchuk, I.I.; Demchina, V.P.; Bortyshevsky, V.A.; Korzh, R.V.

    2016-01-01

    This paper presents the study of the influence that air activation rate and reforming temperature have on the gaseous products composition and conversion efficiency during the plasma-catalytic reforming of ethanol. The analysis of product composition showed that the conversion efficiency of ethanol has a maximum in the studied range of reforming temperatures. Researched system provided high reforming efficiency and high hydrogen energy yield at the lower temperatures than traditional conversion technologies

  16. A Framework for Comparative Assessments of Energy Efficiency Policy Measures

    Energy Technology Data Exchange (ETDEWEB)

    Blum, Helcio; Atkinson, Barbara; Lekov, Alex

    2011-05-24

    When policy makers propose new policies, there is a need to assess the costs and benefits of the proposed policy measures, to compare them to existing and alternative policies, and to rank them according to their effectiveness. In the case of equipment energy efficiency regulations, comparing the effects of a range of alternative policy measures requires evaluating their effects on consumers’ budgets, on national energy consumption and economics, and on the environment. Such an approach should be able to represent in a single framework the particularities of each policy measure and provide comparable results. This report presents an integrated methodological framework to assess prospectively the energy, economic, and environmental impacts of energy efficiency policy measures. The framework builds on the premise that the comparative assessment of energy efficiency policy measures should (a) rely on a common set of primary data and parameters, (b) follow a single functional approach to estimate the energy, economic, and emissions savings resulting from each assessed measure, and (c) present results through a set of comparable indicators. This framework elaborates on models that the U.S. Department of Energy (DOE) has used in support of its rulemakings on mandatory energy efficiency standards. In addition to a rigorous analysis of the impacts of mandatory standards, DOE compares the projected results of alternative policy measures to those projected to be achieved by the standards. The framework extends such an approach to provide a broad, generic methodology, with no geographic or sectoral limitations, that is useful for evaluating any type of equipment energy efficiency market intervention. The report concludes with a demonstration of how to use the framework to compare the impacts estimated for twelve policy measures focusing on increasing the energy efficiency of gas furnaces in the United States.

  17. Instrument to measure energy and charge of low energy interplanetary particles

    Science.gov (United States)

    Tums, E.; Gloeckler, G.; Cain, J.; Sciambi, R.; Fan, C. Y.

    1974-01-01

    An experiment to measure the charge composition and energy spectra of ultra low energy charged particles in interplanetary space has been developed and launched on the IMP 8 (Explorer 50) satellite on Oct. 26, 1973. The instrument consists of two separate sensors sharing common electronics. One of these sensors uses a thin window gas proportional counter to measure the rate of energy loss and a totally depleted silicon surface barrier detector to measure total energy of incoming particles. The energy range for two dimensional analysis extends from 300 KeV to 2.5 MeV for protons and 60 KeV/nucleon to 25 MeV/nucleon for iron with excellent resolution of individual chemical elements. The other sensor combines electrostatic deflection with total energy measurements in silicon surface barrier detectors to give the ionic charge and kinetic energy of the particle.

  18. Energy saving and recovery measures in integrated urban water systems

    Science.gov (United States)

    Freni, Gabriele; Sambito, Mariacrocetta

    2017-11-01

    The present paper describes different energy production, recovery and saving measures which can be applied in an integrated urban water system. Production measures are often based on the installation of photovoltaic systems; the recovery measures are commonly based on hydraulic turbines, exploiting the available pressure potential to produce energy; saving measures are based on substitution of old pumps with higher efficiency ones. The possibility of substituting some of the pipes of the water supply system can be also considered in a recovery scenario in order to reduce leakages and recovery part of the energy needed for water transport and treatment. The reduction of water losses can be obtained through the Active Leakage Control (ALC) strategies resulting in a reduction in energy consumption and in environmental impact. Measures were applied to a real case study to tested it the efficiency, i.e., the integrated urban water system of the Palermo metropolitan area in Sicily (Italy).

  19. Mitigation technologies and measures in energy sector of Kazakstan

    Energy Technology Data Exchange (ETDEWEB)

    Pilifosova, O.; Danchuk, D.; Temertekov, T. [and others

    1996-12-31

    An important commitment in the UN Framework Convention on Climate Change is to conduct mitigation analysis and to communicate climate change measures and policies. In major part reducing CO{sub 2} as well as the other greenhouse gas emissions in Kazakstan, can be a side-product of measures addressed to increasing energy efficiency. Since such measures are very important for the national economy, mitigation strategies in the energy sector of Kazakstan are directly connected with the general national strategy of the energy sector development. This paper outlines the main measures and technologies in energy sector of Kazakstan which can lead to GHG emissions reduction and presents the results of current mitigation assessment. The mitigation analysis is addressed to energy production sector. A baseline and six mitigation scenarios were developed to evaluate the most attractive mitigation options, focusing on specific technologies which have been already included in sustainable energy programs. According to the baseline projection, Kazakstan`s CO{sub 2} emissions will not exceed their 1990 level until 2005. The potential for CO{sub 2} emission reduction is estimated to be about 11 % of the base line emission level by the end of considered period (in 2020). The main mitigation options in the energy production sector in terms of mitigation potential and technical and economical feasibility include rehabilitation of thermal power plants aimed to increasing efficiency, use of nuclear energy and further expansion in the use of hydro energy based on small hydroelectric power plants.

  20. Catalogue of Energy Efficiency Measures for France: descriptive fact sheets

    International Nuclear Information System (INIS)

    2012-06-01

    ADEME wished to learn about existing effective energy efficiency measures implemented outside of France, whether cross-sectoral or targeted at a specific sector (industry, transport, buildings or agriculture). The objective of this survey was to determine whether any of these measures could be applied in France, with the goal of holding down the growth of energy consumption. This survey has led to the writing of a catalog of 53 two-page fact sheets describing the measures identified as interesting for France. These measures were analysed via classic criteria of evaluation such as cost-efficiency or impact, allowing to highlight the most successful measures for the French territory

  1. Implications of energy efficiency measures in wheat production

    DEFF Research Database (Denmark)

    Meyer-Aurich, Andreas; Ziegler, T.; Scholz, L.

    The economic and environmental effect of energy saving measures were analyzed for a typical wheat production system in Germany. The introduction of precision farming, reduced nitrogen fertilization and improved crop drying technologies proved to be efficient measures for enhancing energy efficiency...... in wheat production. While the measures precision farming and improved crop drying require investments, reduced fertilizer input can be realized without investments. The environmental effects of all measures are comparable and do not show a clear advantage of one measure against the others. However......, reduced fertilizer input implies an economic loss which is unlikely to be realized by farmers unless they are forced to do so....

  2. The Energy Balance and Energy-Saving Measures in Greenhouse Tomato Cultivation

    NARCIS (Netherlands)

    Elings, A.; Kempkes, F.L.K.; Kaarsemaker, R.C.; Ruijs, M.N.A.; Braak, van de N.J.; Dueck, T.A.

    2005-01-01

    Reliable and quick assessment of energy conservation measures in greenhouse cultivation supports growers in their operations. Such an overview should quantify the consequences of changes in energy flows for total energy consumption, amount and quality of production, and farm economy. Using tomato as

  3. Precision measurements of the SLC [Stanford Linear Collider] beam energy

    International Nuclear Information System (INIS)

    Kent, J.; King, M.; Von Zanthier, C.

    1989-03-01

    A method of precisely determining the beam energy in high energy linear colliders has been developed using dipole spectrometers and synchrotron radiation detectors. Beam lines implementing this method have been installed on the Stanford Linear Collider. An absolute energy measurement with an accuracy of better than δE/E = 5 /times/ 10/sup /minus/4/ can be achieved on a pulse-to-pulse basis. The operation of this system will be described. 4 refs., 3 figs., 1 tab

  4. Measuring the security of energy exports demand in OPEC economies

    International Nuclear Information System (INIS)

    Dike, Jude Chukwudi

    2013-01-01

    One of the objectives of OPEC is the security of demand for the crude oil exports of its members. Achieving this objective is imperative with the projected decline in OECD countries' crude oil demand among other crude oil demand shocks. This paper focuses on determining the external crude oil demand security risks of OPEC member states. In assessing these risks, this study introduces two indexes. The first index, Risky Energy Exports Demand (REED), indicates the level of energy export demand security risks for OPEC members. It combines measures of export dependence, economic dependence, monopsony risk and transportation risk. The second index, Contribution to OPEC Risk Exposure (CORE), indicates the individual contribution of the OPEC members to OPEC's risk exposure. This study utilises the disaggregated index approach in measuring energy demand security risks for crude oil and natural gas and involves a country level analysis. With the disaggregated approach, the study shows that OPEC's energy export demand security risks differ across countries and energy types. - Highlights: • REED and CORE indexes are suitable measures for energy exports demand security risk. • The indexes show that energy demand security risk is different for each OPEC country. • The countries contribution to OPEC's energy demand security risk is also different. • The outcome is necessary for OPEC's common energy and climate change policies. • The outcome makes a case for oil demand security as a topical issue in the literature

  5. Compact Measurement Station for Low Energy Proton Beams

    CERN Document Server

    Yildiz, H.

    2017-02-24

    A compact, remote controlled, cost efficient diagnostic station has been developed to measure the charge, the profile and the emittance for low energy proton beams. It has been installed and tested in the proton beam line of the Project Prometheus at SANAEM of the Turkish Atomic Energy Authority.

  6. Potential of energy efficiency measures in the world steel industry.

    NARCIS (Netherlands)

    Galama, Tjebbe

    2013-01-01

    SUMMARY The world steel industry plays a major role in energy use and Greenhouse Gas (GHG) emissions now and in the future. Implementing energy efficiency measures is among one of the most cost-effective investments that the industry could make in improv

  7. Poverty and environmental impacts of electricity price reforms in Montenegro

    International Nuclear Information System (INIS)

    Silva, Patricia; Klytchnikova, Irina; Radevic, Dragana

    2009-01-01

    The creation of the Energy Community of South Eastern Europe in 2005 committed countries in South Eastern Europe to liberalize their energy markets in accordance to EU regulations. The Government of Montenegro is thus in the process of reforming its energy sector, which includes an electricity tariff reform. This paper analyzes the environmental and social impacts of an increase in residential electricity tariffs contemplated - which is expected to range anywhere from 40 to over 100% increase. As this analysis shows, such a significant price rise will impose a heavy burden on the poor households and it may adversely affect the environment. In an ex ante investigation of the welfare impact of this price increase on households in Montenegro, we show that the anticipated price increase will result in a very significant increase in households' energy expenditures. A simulation of alternative policy measures analyzes the impact of different tariff levels and structures, focusing on the poor and vulnerable households. Higher electricity prices could also significantly increase the proportion of households using fuelwood for space heating. Thus the level of fuelwood consumption should be carefully monitored under the electricity tariff reforms and the Government of Montenegro should combine the tariff reforms with a carefully evaluated set of policy measures to mitigate the effect of the electricity price increase on the poor. (author)

  8. Economic growth and the reform of the judicial system of Bulgaria in the period 2000-2015 (vision for a new measurement model). IDEAS Working Paper Series from RePEc N72919, Federal Reserve Bank of St Louis, USA

    OpenAIRE

    Nozharov, Shteryo

    2015-01-01

    Abstract: The publication proposes a concept for new model for evaluation of the “reform of the judicial system”, different from those applied by the World Bank and the International Monetary Fund where the economic growth rate of each country is measured. Their models, based on performance indicators, examine the “reform of the judicial system” as constant and floating in time, evaluated in certain periods of time. This fact obstructs the identification of the relative legislative miscarriag...

  9. Legal Sector Reform Pursuits in Ethiopia: Gaps in Grassroots ...

    African Journals Online (AJOL)

    EN_Stebek

    legal sector reform and judicial reform) was very ambitious with exemplary levels of zeal, budgetary allocation ... as indicators Ethiopia's justice sector reform: (a) institutions, processes and procedures in lawmaking and .... commercial ties with the West, focusing on the reform of civil and trade laws. Success was measured ...

  10. Energy efficiency measures for offshore oil and gas platforms

    DEFF Research Database (Denmark)

    Nguyen, Tuong-Van; Voldsund, Mari; Breuhaus, Peter

    2016-01-01

    Oil and gas platforms are energy-intensive systems { each facility uses from a few to several hundredsMW of energy, depending on the petroleum properties, export specifcations and feld lifetime. Several technologies for increasing the energy effciency of these plants are investigated in this work...... and strategies. The benefits and practical limitations of each measure are discussed based on thermodynamic, economic and environmental factors. Signiffcant energy savings and reductions in CO2-emissions are depicted, reaching up to 15-20 %. However, they strongly differ from one facility to another, which...

  11. Electron and photon energy measurement calibration with the ATLAS detector

    CERN Document Server

    Manzoni, Stefano; The ATLAS collaboration

    2016-01-01

    An accurate calibration of the energy measurement of electron and photon is paramount for many ATLAS physics analysis. The calibration of the energy measurement is performed in-situ using a large statistics of Z->ee events. The results obtained with the pp collisions data recorded in 2015 and 2016 at sqrt(s)= 13 TeV, corresponding to an integrated luminosity of 3.2 fb-1 and 2.7 fb-1 respectively , as well as the corresponding uncertainties on the electron and photon energy scales, are presented.

  12. Electron and photon energy measurement calibration with the ATLAS detector

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00436885; The ATLAS collaboration

    2016-01-01

    An accurate calibration of the energy measurement of electrons and photons is paramount for many ATLAS physics analyses. The calibration of the energy measurement is performed $in$-$situ$ using a large statistics of $Z \\rightarrow ee$ events. The results obtained with the $pp$ collisions data recorded in 2015 and 2016 at $\\sqrt{s}=13$ TeV, corresponding to an integrated luminosity of 3.2 fb$^{-1}$ and 2.7 fb$^{-1}$ respectively, as well as the corresponding uncertainties on the electron and photon energy scales, are presented

  13. Energy Efficiency Measures to Incorporate into Remodeling Projects

    Energy Technology Data Exchange (ETDEWEB)

    Liaukus, C. [Building America Research Alliance, Kent, WA (United States)

    2014-12-01

    Energy improvements in a home are often approached as one concerted effort, beginning with a simple walk-through assessment or more in-depth energy audit and followed by the installation of recommended energy measures. While this approach allows for systems thinking to guide the efforts, comprehensive energy improvements of this nature are undertaken by a relatively small number of U.S. households compared to piecemeal remodeling efforts. In this report, the U.S Department of Energy Building America Retrofit Alliance research team examines the improvement of a home’s energy performance in an opportunistic way by examining what can be done to incorporate energy efficiency measures into general remodeling work and home repair projects. This allows for energy efficiency upgrades to occur at the same time as remodeling proejcts. There are challenges to this approach, not the least of which being that the work will take place over time in potentially many separate projects. The opportunity to improve a home’s energy efficiency at one time expands or contracts with the scope of the remodel. As such, guidance on how to do each piece thoughtfully and with consideration for potential future projects, is critical.

  14. Energy and Water Conservation Measures for Hanford (2013)

    Energy Technology Data Exchange (ETDEWEB)

    Reid, Douglas J.; Butner, Ryan S.

    2013-04-01

    Pacific Northwest National Laboratory (PNNL) performed an energy and water evaluation of selected buildings on the Hanford Site during the months of May and June 2012. The audit was performed under the direction of the U.S. Department of Energy, Sustainability Performance Office to identify key energy conservation measures (ECMs) and water conservation measures (WCMs). The evaluations consisted of on-site facility walk-throughs conducted by PNNL staff, interviews with building-operating personnel, and an examination of building designs and layouts. Information on 38 buildings was collected to develop a list of energy and water conservation measures. Table ES.1 is a summary of the ECMs, while table ES.2 is a summary of the WCMs.

  15. Analysis of Illinois Home Performance with ENERGY STAR® Measure Packages

    Energy Technology Data Exchange (ETDEWEB)

    Baker, J. [Partnership for Advanced Residential Retrofit (PARR), Chicago, IL (United States); Yee, S. [Partnership for Advanced Residential Retrofit (PARR), Chicago, IL (United States); Brand, L. [Partnership for Advanced Residential Retrofit (PARR), Chicago, IL (United States)

    2013-09-01

    Through the Chicagoland Single Family Housing Characterization and Retrofit Prioritization report, the Partnership for Advanced Residential Retrofit research team characterized 15 housing types in the Chicagoland region based on assessor data, utility billing history, and available data from prior energy efficiency programs. Within these 15 groups, a subset showed the greatest opportunity for energy savings based on BEopt Version 1.1 modeling of potential energy efficiency package options and the percent of the housing stock represented by each group. In this project, collected field data from a whole-home program in Illinois are utilized to compare marketplace-installed measures to the energy saving optimal packages previously developed for the 15 housing types. Housing type, conditions, energy efficiency measures installed, and retrofit cost information were collected from 19 homes that participated in the Illinois Home Performance with ENERGY STAR program in 2012, representing eight of the characterized housing groups. Two were selected for further case study analysis to provide an illustration of the differences between optimal and actually installed measures. Taken together, these homes are representative of 34.8% of the Chicagoland residential building stock. In one instance, actual installed measures closely matched optimal recommended measures.

  16. Energy-water-food nexus under financial constraint environment: good, the bad, and the ugly sustainability reforms in sub-Saharan African countries.

    Science.gov (United States)

    Zaman, Khalid; Shamsuddin, Sadaf; Ahmad, Mehboob

    2017-05-01

    Environmental sustainability agenda are generally compromised by energy, water, and food production resources, while in the recent waves of global financial crisis, it mediates to increase the intensity of air pollutants, which largely affected the less developing countries due to their ease of environmental regulation policies and lack of optimal utilization of economic resources. Sub-Saharan African (SSA) countries are no exception that majorly hit by the recent global financial crisis, which affected the country's natural environment through the channel of unsustainable energy-water-food production. The study employed panel random effect model that addresses the country-specific time-invariant shocks to examine the non-linear relationship between water-energy-food resources and air pollutants in a panel of 19 selected SSA countries, for a period of 2000-2014. The results confirmed the carbon-fossil-methane environmental Kuznets curve (EKC) that turned into inverted U-shaped relationships in a panel of selected SSA countries. Food resources largely affected greenhouse gas (GHG), methane (CH 4 ), and nitrous oxide (N 2 O) emissions while water resource decreases carbon dioxide (CO 2 ), fossil fuel, and CH 4 emissions in a region. Energy efficiency improves air quality indicators while industry value added increases CO 2 emissions, fossil fuel energy, and GHG emissions. Global financial crisis increases the risk of climate change across countries. The study concludes that although SSA countries strive hard to take some "good" initiatives to reduce environmental degradation in a form of improved water and energy sources, however, due to lack of optimal utilization of food resources and global financial constraints, it leads to "the bad" and "the ugly" sustainability reforms in a region.

  17. MEV Energy Electrostatic Accelerator Ion Beam Emittance Measurement

    OpenAIRE

    I.G. Ignat’ev; M.I. Zakharets; S.V. Kolinko; D.P. Shulha

    2014-01-01

    The testing equipment was designed, manufactured and tried out permitting measurements of total current, current profile and emittance of an ion beam extracted from the ion beam. MeV energy electrostatic accelerator ion H + beam emittance measurement results are presented.

  18. Effectiveness of policy measures in transforming the energy system

    International Nuclear Information System (INIS)

    Lund, P.D.

    2007-01-01

    The effectiveness of public policy measures in creating energy impacts were investigated through 20 policy cases on renewable energy and efficient energy use. The policies were grouped into subsidy-type and catalyzing measures based on the use of the public financial resources. The policy cost of subsidies ranged from 1 Euro/MWh up to over 100 Euro/MWh, the feed-in tariffs being clearly the most expensive choice. The public measures that strive for catalyzing market breakthroughs lie in the range 0.1-1 Euro/MWh, but some business driven and procurement type measures could come down to even 0.01 Euro/MWh. The policy costs observed could decrease by 25-60% if accounting for lagging energy impacts. The better policy efficiency of catalytic measures is most likely due to a stronger market and business sensitiveness, understanding of market needs, and focusing more on the end-use sector with active stakeholder involvement. The magnitude of the energy impacts were in average larger from the subsidy instruments but a few end-use technologies linked to catalytic measures reached even higher effects due to the strong market penetration achieved. (author)

  19. Measuring energy poverty in Japan, 2004–2013

    International Nuclear Information System (INIS)

    Okushima, Shinichiro

    2016-01-01

    This paper first examines energy (or fuel) poverty in Japan from 2004 to 2013, especially around the time of the 2011 Great East Japan Earthquake (GEJE). To analyze the issue, the paper employs various poverty and vulnerability measures with the assistance of our unique dataset. The results indicate the aggravation of energy poverty among lower-income and vulnerable households during the past decade, resulting from both the escalation of energy prices and lowering of income. The analysis also employs a new decomposition technique and identifies the explanatory factors associated with the increase in energy poverty. These results suggest there were major changes in the forces driving the increase in energy poverty before and after the GEJE. After 2011, income alleviates energy poverty in Japan, with energy prices becoming the main driving factor. - Highlights: • This study is the first evaluation of energy poverty in Japan by unique microdata. • Focus on the period of the 2011 Great East Japan Earthquake and Fukushima accident. • Shows the aggravation of energy poverty among lower-income and vulnerable households. • Identifies factors accounting for the changes in energy poverty by decomposition. • Major changes in the explanatory factors before and after the Fukushima accident.

  20. Coherent Wave Measurement Buoy Arrays to Support Wave Energy Extraction

    Science.gov (United States)

    Spada, F.; Chang, G.; Jones, C.; Janssen, T. T.; Barney, P.; Roberts, J.

    2016-02-01

    Wave energy is the most abundant form of hydrokinetic energy in the United States and wave energy converters (WECs) are being developed to extract the maximum possible power from the prevailing wave climate. However, maximum wave energy capture is currently limited by the narrow banded frequency response of WECs as well as extended protective shutdown requirements during periods of large waves. These limitations must be overcome in order to maximize energy extraction, thus significantly decreasing the cost of wave energy and making it a viable energy source. Techno-economic studies of several WEC devices have shown significant potential to improve wave energy capture efficiency through operational control strategies that incorporate real-time information about local surface wave motions. Integral Consulting Inc., with ARPA-E support, is partnering with Sandia National Laboratories and Spoondrift LLC to develop a coherent array of wave-measuring devices to relay and enable the prediction of wave-resolved surface dynamics at a WEC location ahead of real time. This capability will provide necessary information to optimize power production of WECs through control strategies, thereby allowing for a single WEC design to perform more effectively across a wide range of wave environments. The information, data, or work presented herein was funded in part by the Advanced Research Projects Agency-Energy (ARPA-E), U.S. Department of Energy, under Award Number DE-AR0000514.

  1. Constitutional questions on a reform of the Atomic Energy Act, in particular on the distribution of administrative competence within the Federation

    International Nuclear Information System (INIS)

    Steinberg, R.

    1991-01-01

    The lecture deals in particular with the constitutional framing and the principles of the Laender administration on behalf of the Federal Government, the responsibility of the Land for subject matters and action and submit reports, court proceedings the barrier of Paragraph 85 II of the Basic Law: 'Directives'. The final conclusion is that the proposals to shift the administrative responsibilities for the execution of the Atomic Energy Act to the Federation and those for a supposed elimination of weak points in the Laender administration on behalf of the Federal Government are highly questionable in the face of constitutional law. The attempt at a new interpretation of the regulations on the Federal Government is equal to the intention of amending the Constitution without a law for such an amendment. What poses the foremost problems, however, is the perspective that is to set the course here for the reform of the Atomic Energy Act: strengthening of the Federation and further weakening of the competences of the Laender that constitute their autonomous statehood. No consideration is given to the point that structural changes to the atomic energy administration must necessarily effect other areas of the Laender administration on behalf of the Federal Government where the work done over more than 40 years has been to everyone's satisfaction. Then again the intention of fostering the nuclear industry by strengthening the Federal Government might backfire after the next elections to the Bundestag. (orig./HSCH) [de

  2. Applications of solar reforming technology

    Energy Technology Data Exchange (ETDEWEB)

    Spiewak, I. [Weizmann Inst. of Science, Rehovoth (Israel); Tyner, C.E. [Sandia National Labs., Albuquerque, NM (United States); Langnickel, U. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Koeln (Germany)

    1993-11-01

    Research in recent years has demonstrated the efficient use of solar thermal energy for driving endothermic chemical reforming reactions in which hydrocarbons are reacted to form synthesis gas (syngas). Closed-loop reforming/methanation systems can be used for storage and transport of process heat and for short-term storage for peaking power generation. Open-loop systems can be used for direct fuel production; for production of syngas feedstock for further processing to specialty chemicals and plastics and bulk ammonia, hydrogen, and liquid fuels; and directly for industrial processes such as iron ore reduction. In addition, reforming of organic chemical wastes and hazardous materials can be accomplished using the high-efficiency destruction capabilities of steam reforming. To help identify the most promising areas for future development of this technology, we discuss in this paper the economics and market potential of these applications.

  3. Effects of Energy Drinks on Economy and Cardiovascular Measures.

    Science.gov (United States)

    Peveler, Willard W; Sanders, Gabe J; Marczinski, Cecile A; Holmer, Brady

    2017-04-01

    Peveler, WW, Sanders, GJ, Marczinski, CA, and Holmer, B. Effects of energy drinks on economy and cardiovascular measures. J Strength Cond Res 31(4): 882-887, 2017-The use of energy drinks among athletes has risen greatly. Caffeine and taurine are the 2 primary performance enhancing ingredients found in energy drinks. The number of emergency department visits involving energy drinks doubled over the past 5 years. Reviews of the health complications have highlighted adverse cardiovascular events. The literature reveals that caffeine is known to moderately increase blood pressure (BP) and heart rate (HR). The purpose of this study was to determine the effect of 3 different energy drinks on cardiovascular and performance measures. Fifteen recreational runners completed 5 trials. The first trial consisted of a graded exercise protocol. The 4 remaining trials consisted of 15-minute economy trials at a treadmill speed consistent with 70% of subject's V[Combining Dot Above]O2max. An hour before subjects ingested 1 of the 3 energy drinks or a placebo. HR, BP, V[Combining Dot Above]O2, and rating of perceived exertion (RPE) were recorded during the 15-minute trial. Mean values for dependent measures were compared using repeated-measures analysis of variance. Fifteen-minute systolic BP readings were significantly lower in the placebo trials (156.93 ± 15.50) in relation to the 3 energy drink trials (163.87 ± 13.30, 166.47 ± 13.71, and 165.00 ± 15.23). There were no significant differences in diastolic BP and HR. There were no significant differences found in V[Combining Dot Above]O2 or RPE measures. Ingestion of energy drinks demonstrated no change in V[Combining Dot Above]O2 or RPE during the economy trials. The findings show no performance benefits under the conditions of this study. However, there does appear to be a significant increase in systolic BP.

  4. Exercise, energy expenditure and energy balance, as measured with doubly labelled water.

    Science.gov (United States)

    Westerterp, Klaas R

    2018-02-01

    The doubly labelled water method for the measurement of total daily energy expenditure (TDEE) over 1-3 weeks under daily living conditions is the indicated method to study effects of exercise and extreme environments on energy balance. Subjects consume a measured amount of doubly labelled water (2H2 18O) to increase background enrichment of body water for 18O and 2H, and the subsequent difference in elimination rate between 18O and 2H, as measured in urine, saliva or blood samples, is a measure for carbon dioxide production and thus allows calculation of TDEE. The present review describes research showing that physical activity level (PAL), calculated as TDEE (assessed with doubly labelled water) divided by resting energy expenditure (REE, PAL = TDEE/REE), reaches a maximum value of 2·00-2·40 in subjects with a vigorously active lifestyle. Higher PAL values, while maintaining energy balance, are observed in professional athletes consuming additional energy dense foods to compete at top level. Exercise training can increase TDEE/REE in young adults to a value of 2·00-2·40, when energy intake is unrestricted. Furthermore, the review shows an exercise induced increase in activity energy expenditure can be compensated by a reduction in REE and by a reduction in non-exercise physical activity, especially at a negative energy balance. Additionally, in untrained subjects, an exercise-induced increase in activity energy expenditure is compensated by a training-induced increase in exercise efficiency.

  5. Energy Efficiency Measures to Incorporate into Remodeling Projects

    Energy Technology Data Exchange (ETDEWEB)

    Liaukus, C.

    2014-12-01

    Energy improvements in a home are often approached as one concerted effort, beginning with a simple walk-through assessment or more in-depth energy audit and followed by the installation of recommended energy measures. While this approach allows for systems thinking to guide the efforts, comprehensive energy improvements of this nature are undertaken by a relatively small number of the households in our nation compared to more piecemeal remodeling efforts. Even when programs like the Weatherization Assistance Program and Home Performance with ENERGY STAR are considered, homes that have had a comprehensive energy makeover still represent a small fraction of the 111.1 million households. In this report, the U.S Department of Energy Building America Retrofit Alliance research team looks at the improvement of a home's energy performance in an opportunistic way: it examines what can be done to incorporate energy efficiency measures into general remodeling work and home repair projects. This allows for the possibility for people who would not normally pursue energy efficiency but will remodel their kitchen or re-side their home to improve their home's performance at the same time. There are challenges to this approach, not the least of which being that the work will take place over time in potentially many separate projects. The opportunity to improve a home's energy efficiency at one time expands or contracts with the scope of the remodel. As such, guidance on how to do each piece thoughtfully and with consideration for potential future projects, is critical.

  6. Energy efficiency measures for offshore oil and gas platforms

    DEFF Research Database (Denmark)

    Nguyen, Tuong-Van; Voldsund, Mari; Breuhaus, Peter

    2016-01-01

    Oil and gas platforms are energy-intensive systems { each facility uses from a few to several hundredsMW of energy, depending on the petroleum properties, export specifcations and feld lifetime. Several technologies for increasing the energy effciency of these plants are investigated in this work....... They include: (i) the installation of multiple pressure levels in production manifolds, (ii) the implementation of multiphaseexpanders, (iii) the promotion of energy and process integration, (iv) the limitation of gas recirculation around the compressors, (v) the exploitation of low-temperature heat from...... and strategies. The benefits and practical limitations of each measure are discussed based on thermodynamic, economic and environmental factors. Signiffcant energy savings and reductions in CO2-emissions are depicted, reaching up to 15-20 %. However, they strongly differ from one facility to another, which...

  7. MEASURES TO IMPROVE ENERGY EFFCIENCY PLATFORM OF A TOURISM COMPANY

    Directory of Open Access Journals (Sweden)

    I. FELEA

    2017-03-01

    Full Text Available Energy efficiency improvement program for an organization that consumes a significant amount of energy is an important document, both through fulfillment of obligations and especially through utility of identified measures on improving EnEF. and economic. After evoking the regulatory framework and the usefulness of this concerns, the paper presents the working methodology in making identifications MIEnEF for a TC and the results for Turism Felix.

  8. Catalogue of Energy Efficiency Measures for France - Synthesis report

    International Nuclear Information System (INIS)

    2013-10-01

    ADEME wished to learn about existing effective energy efficiency measures implemented outside of France, whether cross-sectoral or targeted at a specific sector (industry, transport, buildings or agriculture). The objective of this survey was to determine whether any of these measures could be applied in France, with the goal of holding down the growth of energy consumption. This survey has led to the writing of a catalog of 53 two-page fact sheets describing the measures identified as interesting for France. These measures were analysed via classic criteria of evaluation such as cost-efficiency or impact, allowing to highlight the most successful measures for the French territory. ADEME presents you a synthesis of this survey in this document

  9. Dual-Readout Calorimetry for High-Quality Energy Measurements

    CERN Document Server

    Wigmans, R

    2010-01-01

    During the past seven years, the DREAM Collaboration has systematically investigated all factors that determine and limit the precision with which the properties of hadrons and jets can be measured in calorimeters. Using simultaneous detection of the deposited energy and the Cerenkov light produced in hadronic shower development (dual readout), the fluctuations in the electromagnetic shower fraction could be measured event by event and their effects on signal linearity, response function and energy resolution eliminated. Detailed measurement of the time structure of the signals made it possible to measure the contributions of nuclear evaporation to the signals and thus reduce the effects of fluctuations in “invisible energy”. We are now embarking on the construction of a full-scale calorimeter which incorporates all these elements and which should make it possible to measure the four-vectors of both electrons, hadrons and jets with very high precision, in an instrument that can be simply calibrated with e...

  10. Precision measurements of high-energy conversion electron lines and determination of neutron binding energies

    International Nuclear Information System (INIS)

    Braumandl, F.

    1979-01-01

    The paper first discusses the energy accuracy of the BILL conversion electron spectrometer at the Grenoble high flux reactor. With an improved temperature stabilisation of the magnets, an energy accuracy of ΔE/E -5 can be reached. After this, highly exact measurements of high-energy conversion electron lines of the 200 Hg, 114 Cd, 165 Dy, 168 Er, 239 U nuclei and the 13 C, 28 Al 3 H and 92 Zr photoelectron lines were carried out. Energy calibration of the spectrometer was carried out in the 1.5 MeV to 6.5 MeV range with intensive high-energy transitions of the 200 Hg nucleus. Systematic calibration errors could be investigated by means of combinations between the calibration lines. A calibration for absolute energies was obtained by comparing low-energy gamma transitions of 200 Hg with the 411.8 keV gold standard. (orig.) [de

  11. Arbitration Reform

    Directory of Open Access Journals (Sweden)

    Svetlana Stepurina

    2017-01-01

    Full Text Available УДК 347.73:341.63Subject. This informational article highlights recent changes to the Russian legislation on arbitration.Purpose. To highlight the most important aspects of arbitration law reform, and examines the effects they will have on the development of arbitration in RussiaMethodology. The author uses a formal-legal method.Results, scope of application. The author distinguishes the difference between constantly acting arbitration courts and arbitration courts ad hoc. The special status of a number of arbitration institutions (the ICAC and MAC at the Russian Chamber of Commerce and Industry, is contrary to the constitutional principle of equality under the law. A major achievement of the new legislation on arbitration courts is expanding the range arbitrarily disputes.Conclusions. The new legislation more clearly prescribed the interaction of arbitration and state courts, including requiring the latter to promote the arbitrators, acting under the regulations of the permanent arbitration institutions in obtaining evidence.In addition, the reform of the arbitration law have left aside the problem of improving the quality of judicial control over arbitration decisions.The arbitration law will still be able to improve the arbitration, to enhance its credibility and attractiveness for the participants of civil turnover.

  12. Environmental fiscal reforms

    OpenAIRE

    Ashish Chaturvedi; Manjeet S. Saluja; Abhijit Banerjee; Rachna Arora

    2014-01-01

    The paper presents concepts and instruments of environmental fiscal reforms (EFR) and their application in the Indian context. EFR can lead to environmental improvement more efficiently and cost effectively than traditional regulation. There is substantial experience of successful EFR implementation in the European Union. India has also adopted some EFR measures such as deregulation of petrol prices, coal cess, and subsidy for setting up common effluent treatment plants. The challenges of imp...

  13. Direct measures of mechanical energy for knife mill size reduction

    Energy Technology Data Exchange (ETDEWEB)

    Bitra, V.S.P. [University of Tennessee; Womac, A.R. [University of Tennessee; Igathinathane, C. [Mississippi State University (MSU); Miu, P.I [University of Tennessee; Yang, Y.T. [University of Tennessee; Smith, D.R. [University of Tennessee; Chevanan, Nehru [University of Tennessee; Sokhansanj, Shahabaddine [ORNL

    2009-08-01

    Lengthy straw/stalk of biomass may not be directly fed into grinders such as hammer mills and disc refiners. Hence, biomass needs to be preprocessed using coarse grinders like a knife mill to allow for efficient feeding in refiner mills without bridging and choking. Size reduction mechanical energy was directly measured for switchgrass (Panicum virgatum L.), wheat straw (Triticum aestivum L.), and corn stover (Zea mays L.) in an instrumented knife mill. Direct power inputs were determined for different knife mill screen openings from 12.7 to 50.8 mm, rotor speeds between 250 and 500 rpm, and mass feed rates from 1 to 11 kg/min. Overall accuracy of power measurement was calculated to be 0.003 kW. Total specific energy (kWh/Mg) was defined as size reduction energy to operate mill with biomass. Effective specific energy was defined as the energy that can be assumed to reach the biomass. The difference is parasitic or no-load energy of mill. Total specific energy for switchgrass, wheat straw, and corn stover chopping increased with knife mill speed, whereas, effective specific energy decreased marginally for switchgrass and increased for wheat straw and corn stover. Total and effective specific energy decreased with an increase in screen size for all the crops studied. Total specific energy decreased with increase in mass feed rate, but effective specific energy increased for switchgrass and wheat straw, and decreased for corn stover at increased feed rate. For knife mill screen size of 25.4 mm and optimum speed of 250 rpm, optimum feed rates were 7.6, 5.8, and 4.5 kg/min for switchgrass, wheat straw, and corn stover, respectively, and the corresponding total specific energies were 7.57, 10.53, and 8.87 kWh/Mg and effective specific energies were 1.27, 1.50, and 0.24 kWh/Mg for switchgrass, wheat straw, and corn stover, respectively. Energy utilization ratios were calculated as 16.8%, 14.3%, and 2.8% for switchgrass, wheat straw, and corn stover, respectively. These

  14. Renewable energy and conservation measures for non-residential buildings

    Science.gov (United States)

    Grossman, Andrew James

    The energy demand in most countries is growing at an alarming rate and identifying economically feasible building retrofit solutions to decrease the need for fossil fuels so as to mitigate their environmental and societal impacts has become imperative. Two approaches are available for identifying feasible retrofit solutions: 1) the implementation of energy conservation measures; and 2) the production of energy from renewable sources. This thesis focuses on the development of retrofit software planning tools for the implementation of solar photovoltaic systems, and lighting system retrofits for mid-Michigan institutional buildings. The solar planning tool exploits the existing blueprint of a building's rooftop, and via image processing, the layouts of the solar photovoltaic arrays are developed based on the building's geographical location and typical weather patterns. The resulting energy generation of a PV system is estimated and is utilized to determine levelized energy costs. The lighting system retrofit analysis starts by a current utilization assessment of a building to determine the amount of energy used by the lighting system. Several LED lighting options are evaluated on the basis of color correlation temperature, color rendering index, energy consumption, and financial feasibility, to determine a retrofit solution. Solar photovoltaic installations in mid-Michigan are not yet financially feasible, but with the anticipated growth and dynamic complexity of the solar photovoltaic market, this solar planning tool is able to assist building proprietors make executive decisions regarding their energy usage. Additionally, a lighting system retrofit is shown to have significant financial and health benefits.

  15. Measurement of energy distribution in flowing hydrogen microwave plasmas

    Science.gov (United States)

    Chapman, R.; Morin, T.; Finzel, M.; Hawley, M. C.

    1985-01-01

    An electrothermal propulsion concept utilizing a microwave plasma system as the mechanism to convert electromagnetic energy into kinetic energy of a flowing gas is investigated. A calorimetry system enclosing a microwave plasma system has been developed to accurately measure the energy inputs and outputs of the microwave plasma system. The rate of energy transferred to the gas can be determined to within + or - 1.8 W from an energy balance around the microwave plasma system. The percentage of the power absorbed by the microwave plasma system transferred to the hydrogen gas as it flows through the system is found to increase with the increasing flow rate, to decrease with the increasing pressure, and to be independent of the absorbed power. An upper bound for the hydrogen gas temperature is estimated from the energy content, heat capacity, and flow rate of the gas stream. A lower bound for an overall heat-transfer coefficient is then calculated, characterizing the energy loss from the hydrogen gas stream to the air cooling of the plasma discharge tube wall. The heat-transfer coefficient is found to increase with the increasing flow rate and pressure and to be independent of the absorbed power. This result indicates that a convective-type mechanism is responsible for the energy transfer.

  16. Measurement of the nucleon structure function using high energy muons

    International Nuclear Information System (INIS)

    Meyers, P.D.

    1983-12-01

    We have measured the inclusive deep inelastic scattering of muons on nucleons in iron using beams of 93 and 215 GeV muons. To perform this measurement, we have built and operated the Multimuon Spectrometer (MMS) in the muon beam at Fermilab. The MMS is a magnetized iron target/spectrometer/calorimeter which provides 5.61 kg/cm 2 of target, 9% momentum resolution on scattered muons, and a direct measure of total hadronic energy with resolution sigma/sub nu/ = 1.4√nu(GeV). In the distributed target, the average beam energies at the interaction are 88.0 and 209 GeV. Using the known form of the radiatively-corrected electromagnetic cross section, we extract the structure function F 2 (x,Q 2 ) with a typical precision of 2% over the range 5 2 2 /c 2 . We compare our measurements to the predictions of lowest order quantum chromodynamics (QCD) and find a best fit value of the QCD scale parameter Λ/sub LO/ = 230 +- 40/sup stat/ +- 80/sup syst/ MeV/c, assuming R = 0 and without applying Fermi motion corrections. Comparing the cross sections at the two beam energies, we measure R = -0.06 +- 0.06/sup stat/ +- 0.11/sup syst/. Our measurements show qualitative agreement with QCD, but quantitative comparison is hampered by phenomenological uncertainties. The experimental situation is quite good, with substantial agreement between our measurements and those of others. 86 references

  17. Optimizing Lidar Scanning Strategies for Wind Energy Measurements (Invited)

    Science.gov (United States)

    Newman, J. F.; Bonin, T. A.; Klein, P.; Wharton, S.; Chilson, P. B.

    2013-12-01

    Environmental concerns and rising fossil fuel prices have prompted rapid development in the renewable energy sector. Wind energy, in particular, has become increasingly popular in the United States. However, the intermittency of available wind energy makes it difficult to integrate wind energy into the power grid. Thus, the expansion and successful implementation of wind energy requires accurate wind resource assessments and wind power forecasts. The actual power produced by a turbine is affected by the wind speeds and turbulence levels experienced across the turbine rotor disk. Because of the range of measurement heights required for wind power estimation, remote sensing devices (e.g., lidar) are ideally suited for these purposes. However, the volume averaging inherent in remote sensing technology produces turbulence estimates that are different from those estimated by a sonic anemometer mounted on a standard meteorological tower. In addition, most lidars intended for wind energy purposes utilize a standard Doppler beam-swinging or Velocity-Azimuth Display technique to estimate the three-dimensional wind vector. These scanning strategies are ideal for measuring mean wind speeds but are likely inadequate for measuring turbulence. In order to examine the impact of different lidar scanning strategies on turbulence measurements, a WindCube lidar, a scanning Halo lidar, and a scanning Galion lidar were deployed at the Southern Great Plains Atmospheric Radiation Measurement (ARM) site in Summer 2013. Existing instrumentation at the ARM site, including a 60-m meteorological tower and an additional scanning Halo lidar, were used in conjunction with the deployed lidars to evaluate several user-defined scanning strategies. For part of the experiment, all three scanning lidars were pointed at approximately the same point in space and a tri-Doppler analysis was completed to calculate the three-dimensional wind vector every 1 second. In another part of the experiment, one of

  18. Agora Energiewende (2017). New pricing models for energy. Fundamentals of a reform of fees, taxes, levies and charges on electricity and fossil fuels; Agora Energiewende (2017). Neue Preismodelle fuer Energie. Grundlagen einer Reform der Entgelte, Steuern, Abgaben und Umlagen auf Strom und fossile Energietraeger

    Energy Technology Data Exchange (ETDEWEB)

    Praetorius, Barbara; Lenck, Thorsten [Agora Energiewende, Berlin (Germany); Lietz, Franziska [Technische Univ. Clausthal, Clausthal-Zellerfeld (Germany). Energie Forschungszentrum; Buechner, Jens; Nikogosian, Vigen [E-Bridge Consulting GmbH, Bonn (Germany); Schober, Dominik [Zentrum fuer Europaeische Wirtschaftsforschung GmbH (ZEW), Mannheim (Germany); Mannheim Univ. (Germany); Weyer, Hartmut [Technische Univ. Clausthal, Clausthal-Zellerfeld (Germany); Woll, Oliver [Zentrum fuer Europaeische Wirtschaftsforschung GmbH (ZEW), Mannheim (Germany)

    2017-04-15

    In the ideal electricity market, electricity prices give the signal that supply and demand are balanced in real time, flexibility is offered and cost and energy efficiency are achieved. When electricity is scarce, high prices mobilise the operation of storage facilities, load management and generation plants. If electricity is available in surplus, the low prices attract additional customers. Ideally, prices also stimulate the right investments for a reliable, efficient and climate-friendly electricity system - even at the borders of the electricity, heating and transport sectors. In reality, 75 to 80 percent of the electricity price for most consumers consists of government-regulated, regulated price components. Energy taxes, grid charges, taxes and levies total around 55 billion euros per year and fulfil important functions in the financing of the electricity system and energy turnaround. However, they often almost completely overlap the coordinating price signal in wholesale. Offering flexibility is hardly worthwhile because taxes, fees, levies and charges are due immediately. The price signals are also not right at the sector borders: heating oil and natural gas, diesel and petrol are taxed according to other criteria than electricity; there are misguided incentives in the choice of energy sources and climate protection. The reform of the tax, remuneration, levy and levy system is therefore urgently needed, but it is a complex undertaking. Agora Energiewende, with the support of E-Bridge, ZEW and TU Clausthal, has carried out an analysis of the current price structure and explored the scope for a fundamental reform of the existing system. In this way, we want to lay a foundation for the development of concrete reform proposals, which will be worked out in a further study. [German] Im idealen Strommarkt geben Strompreise das Signal dafuer, dass sich Angebot und Nachfrage in Echtzeit ausgleichen, Flexibilitaet angeboten wird und Kosten und Energieeffizienz

  19. Measurement of the calorimetric energy scale in MINOS

    Energy Technology Data Exchange (ETDEWEB)

    Hartnell, Jeffrey J. [St. John' s College, Oxford (United Kingdom)

    2005-01-01

    MINOS is a long-baseline neutrino oscillation experiment. A neutrino beam is created at the Fermi National Accelerator Laboratory in Illinois and fired down through the Earth. Measurements of the energy spectra and composition of the neutrino beam are made both at the source using the Near detector and 735 km away at the Soudan Underground Laboratory in Minnesota using the Far detector. By comparing the spectrum and flavour composition of the neutrino beam between the two detectors neutrino oscillations can be observed. Such a comparison depends on the accuracy of the relative calorimetric energy scale. This thesis details a precise measurement of the calorimetric energy scale of the MINOS Far detector and Calibration detector using stopping muons with a new ''track window'' technique. These measurements are used to perform the relative calibration between the two detectors. This calibration has been accomplished to 1.7% in data and to significantly better than 2% in the Monte Carlo simulation, thus achieving the MINOS relative calibration target of 2%. A number of cross-checks have been performed to ensure the robustness of the calorimetric energy scale measurements. At the Calibration detector the test-beam energy between run periods is found to be consistent with the detector response to better than 2% after the relative calibration is applied. The muon energy loss in the MINOS detectors determined from Bethe-Bloch predictions, data and Monte Carlo are compared and understood. To estimate the systematic error on the measurement of the neutrino oscillation parameters caused by a relative miscalibration a study is performed. A 2% relative miscalibration is shown to cause a 0.6% bias in the values of Δm2 and sin2(2θ).

  20. Analysis of electrical energy consumers operation in the heating plant with proposal of energy savings measures

    Directory of Open Access Journals (Sweden)

    Nikolić Aleksandar

    2016-01-01

    Full Text Available The results of power quality measurements, obtained during an energy audit in the heating plant Vreoci in the Electric Power System of Serbia, are presented in the paper. Two steam boilers, rated at 120MW each, are installed in this heating plant, using coal as a fuel. The energy audit encompassed the measurements of the complete set of parameters needed to determine the thermal efficacy of boilers and the entire heating plant. Based on the measurement results, several technical measures for improving energy efficiency of the plant are proposed. The measures evaluated in the paper should contribute to the reduction of fossil fuel usage and CO2 emissions, thereby resulting in a significant impact in both financial and ecological areas.

  1. Energy usage and technical potential for energy saving measures in the Swedish residential building stock

    International Nuclear Information System (INIS)

    Mata, Érika; Sasic Kalagasidis, Angela; Johnsson, Filip

    2013-01-01

    This paper provides an analysis of the current energy usage (net energy and final energy by fuels) and associated carbon dioxide (CO 2 ) emissions of the Swedish residential building stock, which includes single-family dwellings and multi-family dwellings. Twelve energy saving measures (ESMs) are assessed using a bottom–up modeling methodology, in which the Swedish residential stock is represented by a sample of 1400 buildings (based on data from the year 2005). Application of the ESMs studied gives a maximum technical reduction potential in energy demand of 53%, corresponding to a 63% reduction in CO 2 emissions. Although application of the investigated ESMs would reduce CO 2 emissions, the measures that reduce electricity consumption for lighting and appliances (LA) will increase CO 2 emissions, since the saved electricity production is less CO 2 -intensive than the fuel mix used for the increased space heating required to make up for the loss in indirect heating obtained from LA. - Highlights: ► Analysis of year 2005energy use and CO2 emissions of Swedish residential buildings. ► Includes all single-family dwellings and multi-family dwellings. ► Bottom–up modeling of building stock represented by 1400 buildings. ► Technical effects of 12 energy saving measures are assessed. ► Energy demand can be reduced by53% and associated CO 2 emissions by 63%

  2. Priority mitigation measures in non-energy sector in Kazakstan

    Energy Technology Data Exchange (ETDEWEB)

    Mizina, S.V.; Pilifosova, O.V.; Gossen, E.F.

    1996-12-31

    Fulfilling the Commitments on UN FCCC through the U.S. Country Studies Program, Kazakstan has developed the national GHG Inventory, vulnerability and adaptation assessment and estimated the possibility of mitigation measures in certain sectors. Next step is developing National Climate Change Action Plan. That process includes such major steps as setting priorities in mitigation measures and technologies, their comprehensive evaluation, preparation implementation strategies, developing the procedure of incorporation of the National Action Plan into other development plans and programs. This paper presents programs and measures that can reduce GHG emissions in non-energy sector. Measures in land-use change and forestry, agriculture and coal mining are considered. Current situation in non-energy sector of Kazakstan is discussed. The amount of GHG emissions reduction and cost analysis presented in this paper was developed with the use of IPCC recommendations.

  3. submitter Experimental temperature measurements for the energy amplifier test

    CERN Document Server

    Calero, J; Gallego, E; Gálvez, J; García Tabares, L; González, E; Jaren, J; López, C; Lorente, A; Martínez Val, J M; Oropesa, J; Rubbia, C; Rubio, J A; Saldana, F; Tamarit, J; Vieira, S

    1996-01-01

    A uranium thermometer has been designed and built in order to make local power measurements in the First Energy Amplifier Test (FEAT). Due to the experimental conditions power measurements of tens to hundreds of nW were required, implying a sensitivity in the temperature change measurements of the order of 1 mK. A uranium thermometer accurate enough to match that sensitivity has been built. The thermometer is able to determine the absolute energetic gain obtained in a tiny subcritical uranium assembly exposed to a proton beam of kinetic energies between 600 MeV and 2.75 GeV. In addition, the thermometer measurements have provided information about the spatial power distribution and the shape of the neutron spallation cascade.

  4. Steepest Ascent Tariff Reform

    DEFF Research Database (Denmark)

    Raimondos-Møller, Pascalis; Woodland, Alan

    2014-01-01

    The policy reform literature is primarily concerned with the construction of reforms that yield welfare gains. By contrast, this paper’s contribution is to develop a theoretical concept for which the focus is upon the sizes of welfare gains accruing from policy reforms rather than upon their signs....... In undertaking this task, and by focusing on tariff reforms, we introduce the concept of a steepest ascent policy reform, which is a locally optimal reform in the sense that it achieves the highest marginal gain in utility of any feasible local reform. We argue that this reform presents itself as a natural...... benchmark for the evaluation of the welfare effectiveness of other popular tariff reforms such as the proportional tariff reduction and the concertina rules, since it provides the maximal welfare gain of all possible local reforms. We derive properties of the steepest ascent tariff reform, construct...

  5. A Method to Measure the Bracelet Based on Feature Energy

    Science.gov (United States)

    Liu, Hongmin; Li, Lu; Wang, Zhiheng; Huo, Zhanqiang

    2017-12-01

    To measure the bracelet automatically, a novel method based on feature energy is proposed. Firstly, the morphological method is utilized to preprocess the image, and the contour consisting of a concentric circle is extracted. Then, a feature energy function, which is relevant to the distances from one pixel to the edge points, is defined taking into account the geometric properties of the concentric circle. The input image is subsequently transformed to the feature energy distribution map (FEDM) by computing the feature energy of each pixel. The center of the concentric circle is thus located by detecting the maximum on the FEDM; meanwhile, the radii of the concentric circle are determined according to the feature energy function of the center pixel. Finally, with the use of a calibration template, the internal diameter and thickness of the bracelet are measured. The experimental results show that the proposed method can measure the true sizes of the bracelet accurately with the simplicity, directness and robustness compared to the existing methods.

  6. Measurements of the energy spectrum of backscattered fast neutrons

    International Nuclear Information System (INIS)

    Segal, Y.

    1976-03-01

    Experimental measurements have been made of the energy spectra of neutrons transmitted through slabs of iron, lead and perspex for incident neutron energies of 0.5, 1.0, 1.5 and 1.8 MeV. The neutron energy measurements were made using a He-3 spectrometer. The dependence of the neutrons energy spectrum as a function of scattering thickness was determined. The neutrons source used was a 3MeV Van de Graaff accelerator with a tritium target using the H 3 (p,n) He 3 reaction. The results obtained by the investigator on energy dependence of transmitted neutrons as a function of thickness of scattering material were compared, where possible, with the results obtained by other workers. The comparisons indicated good agreement. The experiment's results are compared with MORSE Monte Carlo calculated values. It is worthwhile to note that direct comparison between measured cross section values and the recommended ones are very far from satisfactory. In almost all cases the calculated spectrum is harder than the experimental one, a situation common to the penetrating and the back-scattered flux

  7. Calorimeters for Precision Timing Measurements in High Energy Physics

    Science.gov (United States)

    Bornheim, Adolf; Apresyan, Artur; Duarte, Javier; Pena, Cristian; Ronzhin, Anatoly; Spiropulu, Maria; Xie, Si

    2015-02-01

    Current and future high energy physics particle colliders are capable to provide instantaneous luminosities of 1034 cm-2s-1 and above. The high center of mass energy, the large number of simultaneous collision of beam particles in the experiments and the very high repetition rates of the collision events pose huge challenges. They result in extremely high particle fluxes, causing very high occupancies in the particle physics detectors operating at these machines. To reconstruct the physics events, the detectors have to make as much information as possible available on the final state particles. We discuss how timing information with a precision of around 10 ps and below can aid the reconstruction of the physics events under such challenging conditions. High energy photons play a crucial role in this context. About one third of the particle flux originating from high energy hadron collisions is detected as photons, stemming from the decays of neutral mesons. In addition, many key physics signatures under study are identified by high energy photons in the final state. They pose a particular challenge in that they can only be detected once they convert in the detector material. The particular challenge in measuring the time of arrival of a high energy photon lies in the stochastic component of the distance to the initial conversion and the size of the electromagnetic shower. They extend spatially over distances which propagation times of the initial photon and the subsequent electromagnetic shower which are large compared to the desired precision. We present studies and measurements from test beams and a cosmic muon test stand for calorimeter based timing measurements to explore the ultimate timing precision achievable for high energy photons of 10 GeV and above. We put particular focus on techniques to measure the timing with a precision of about 10 ps in association with the energy of the photon. For calorimeters utilizing scintillating materials and light guiding

  8. Optimized estimation of energy loss rate for charged particles from energy deposit measurements in tracking detectors

    International Nuclear Information System (INIS)

    Siklér, Ferenc; Szeles, Sándor

    2012-01-01

    The estimation of energy loss rate dE/dx for charged particles in tracking detectors using energy deposit measurements is studied. The truncated mean method is generalized to the weighted mean of the measurements. The weights are optimized for better particle separation in the energy loss rate variable, for arithmetic and geometric means, using a detailed simulation. The obtained weights are rather independent of particle momentum and track segment length. Their values are connected to the form of the corresponding energy deposit distribution, allowing for a simple universal description as a function of the number of measured track segments. While for semiconductor detectors the weighted mean estimator may be further improved with maximum likelihood methods, for gaseous detectors the (0%,55%) truncation already gives excellent results.

  9. China building energy consumption: Situation, challenges and corresponding measures

    International Nuclear Information System (INIS)

    Cai, W.G.; Wu, Y.; Zhong, Y.; Ren, H.

    2009-01-01

    As one of the biggest parts of total national energy consumption (TNEC), building energy consumption (BEC) catches public eyes and has been regarded as a crucial problem of the current society. For the past 20 years, BEC in china has been increasing at a high speed. To curb the rapid growing of BEC, china has enforced and implemented a series of policies. These include enforcing BEC constraints on new building projects, promoting more environment friendly building designs, establishing a more sophisticated legislation for building energy conservation, and increasing the total budget in the area of BEC control. This article analyzed china BEC situation and the challenges. As the main point, the measures required by China government to improve building energy efficiency were introduced as well.

  10. Measured energy savings from using night temperature setback

    International Nuclear Information System (INIS)

    Szydlowski, R.F.; Wrench, L.E.; O'Neill, P.J.

    1993-01-01

    The measured energy savings resulting from using night temperature setback in typical light-construction wooden office buildings was determined. Researchers installed monitoring equipment in a six-building sample of two-story wooden buildings at Fort Devens, Massachusetts. Data obtained during both single-setting and night-setback operating modes were used to develop models of each building's heat consumption as a function of the difference between inside and outside temperature. These models were used to estimate seasonal savings that could be obtained from the use of night-setback thermostat control. The measured savings in heating energy from using night temperature setback for the six Fort Devens buildings ranged from 14% to 25%; the mean savings was 19.2%. Based on an energy cost of $0.65/therm of natural gas, the estimated average cost savings of using automatic setback thermostats in these buildings is $780 per year per building

  11. Conceptualizing and measuring energy security: A synthesized approach

    International Nuclear Information System (INIS)

    Sovacool, Benjamin K.; Mukherjee, Ishani

    2011-01-01

    This article provides a synthesized, workable framework for analyzing national energy security policies and performance. Drawn from research interviews, survey results, a focused workshop, and an extensive literature review, this article proposes that energy security ought to be comprised of five dimensions related to availability, affordability, technology development, sustainability, and regulation. We then break these five dimensions down into 20 components related to security of supply and production, dependency, and diversification for availability; price stability, access and equity, decentralization, and low prices for affordability; innovation and research, safety and reliability, resilience, energy efficiency, and investment for technology development; land use, water, climate change, and air pollution for sustainability; and governance, trade, competition, and knowledge for sound regulation. Further still, our synthesis lists 320 simple indicators and 52 complex indicators that policymakers and scholars can use to analyze, measure, track, and compare national performance on energy security. The article concludes by offering implications for energy policy more broadly. -- Highlights: → Energy security should consist of five dimensions related to availability, affordability, technology development, sustainability, and regulation. → The dimensions of energy security can be broken down into 20 components. → These components can be distilled into 320 simple indicators and 52 complex indicators.

  12. Measurement of the pion form factor at higher energies

    Energy Technology Data Exchange (ETDEWEB)

    Mack, D.J. [CEBAF, Newport News, VA (United States)

    1994-04-01

    One of the strongest arguments for increasing the nominal CEBAF beam energy to equal or exceed 6 GeV is that one would be able to make quality high Q{sup 2} measurements of the charged pion form factor.

  13. Questionnaire survey, Indoor climate measurements and Energy consumption

    DEFF Research Database (Denmark)

    Knudsen, Henrik Nellemose; Thomsen, Kirsten Engelund; Mørck, Ove

    2012-01-01

    . This report presents part of the results of an evaluation of the project that was performed in the settlement. The evaluation consisted of a questionnaire survey of occupant experiences and satisfaction in 35 single-family houses, measurements of energy consumption in 22 selected single-family houses and 58...

  14. Automating Energy Bandgap Measurements in Semiconductors Using LabVIEW

    Science.gov (United States)

    Garg, Amit; Sharma, Reena; Dhingra, Vishal

    2010-01-01

    In this paper, we report the development of an automated system for energy bandgap and resistivity measurement of a semiconductor sample using Four-Probe method for use in the undergraduate laboratory of Physics and Electronics students. The automated data acquisition and analysis system has been developed using National Instruments USB-6008 DAQ…

  15. Exploring Societal Preferences for Energy Sufficiency Measures in Switzerland

    International Nuclear Information System (INIS)

    Moser, Corinne; Rösch, Andreas; Stauffacher, Michael

    2015-01-01

    Many countries are facing a challenging transition toward more sustainable energy systems, which produce more renewables and consume less energy. The latter goal can only be achieved through a combination of efficiency measures and changes in people’s lifestyles and routine behaviors (i.e., sufficiency). While research has shown that acceptance of technical efficiency is relatively high, there is a lack of research on societal preferences for sufficiency measures. However, this is an important prerequisite for designing successful interventions to change behavior. This paper analyses societal preferences for different energy-related behaviors in Switzerland. We use an online choice-based conjoint analysis (N = 150) to examine preferences for behaviors with high technical potentials for energy demand reduction in the following domains: mobility, heating, and food. Each domain comprises different attributes across three levels of sufficiency. Respondents were confronted with trade-off situations evoked through different fictional lifestyles that comprised different combinations of attribute levels. Through a series of trade-off decisions, participants were asked to choose their preferred lifestyle. The results revealed that a vegetarian diet was considered the most critical issue that respondents were unwilling to trade off, followed by distance to workplace and means of transportation. The highest willingness to trade off was found for adjustments in room temperature, holiday travel behaviors, and living space. Participants’ preferences for the most energy-sufficient lifestyles were rather low. However, the study showed that there were lifestyles with substantive energy-saving potentials that were well accepted among respondents. Our study results suggest that the success of energy-sufficiency interventions might depend strongly on the targeted behavior. We speculate that they may face strong resistance (e.g., vegetarian diet). Thus, it seems promising to

  16. Exploring Societal Preferences for Energy Sufficiency Measures in Switzerland

    Energy Technology Data Exchange (ETDEWEB)

    Moser, Corinne, E-mail: corinne.moser@zhaw.ch [Institute of Sustainable Development, School of Engineering, Zurich University of Applied Sciences, Winterthur (Switzerland); Natural and Social Science Interface, Institute for Environmental Decisions, Department of Environmental Systems Science, ETH Zürich, Zürich (Switzerland); Rösch, Andreas [Natural and Social Science Interface, Institute for Environmental Decisions, Department of Environmental Systems Science, ETH Zürich, Zürich (Switzerland); Stauffacher, Michael [Natural and Social Science Interface, Institute for Environmental Decisions, Department of Environmental Systems Science, ETH Zürich, Zürich (Switzerland); Transdisciplinarity Laboratory, Department of Environmental Systems Science, ETH Zürich, Zürich (Switzerland)

    2015-09-16

    Many countries are facing a challenging transition toward more sustainable energy systems, which produce more renewables and consume less energy. The latter goal can only be achieved through a combination of efficiency measures and changes in people’s lifestyles and routine behaviors (i.e., sufficiency). While research has shown that acceptance of technical efficiency is relatively high, there is a lack of research on societal preferences for sufficiency measures. However, this is an important prerequisite for designing successful interventions to change behavior. This paper analyses societal preferences for different energy-related behaviors in Switzerland. We use an online choice-based conjoint analysis (N = 150) to examine preferences for behaviors with high technical potentials for energy demand reduction in the following domains: mobility, heating, and food. Each domain comprises different attributes across three levels of sufficiency. Respondents were confronted with trade-off situations evoked through different fictional lifestyles that comprised different combinations of attribute levels. Through a series of trade-off decisions, participants were asked to choose their preferred lifestyle. The results revealed that a vegetarian diet was considered the most critical issue that respondents were unwilling to trade off, followed by distance to workplace and means of transportation. The highest willingness to trade off was found for adjustments in room temperature, holiday travel behaviors, and living space. Participants’ preferences for the most energy-sufficient lifestyles were rather low. However, the study showed that there were lifestyles with substantive energy-saving potentials that were well accepted among respondents. Our study results suggest that the success of energy-sufficiency interventions might depend strongly on the targeted behavior. We speculate that they may face strong resistance (e.g., vegetarian diet). Thus, it seems promising to

  17. Exploring Societal Preferences for Energy Sufficiency Measures in Switzerland

    Directory of Open Access Journals (Sweden)

    Corinne eMoser

    2015-09-01

    Full Text Available Many countries are facing a challenging transition towards more sustainable energy systems, which produce more renewables and consume less energy. The latter goal can only be achieved through a combination of efficiency measures and changes in people’s lifestyles and routine behaviours (i.e. sufficiency. While research has shown that acceptance of technical efficiency is relatively high, there is a lack of research on societal preferences for sufficiency measures. However, this is an important prerequisite for designing successful interventions to change behaviour.This paper analyses societal preferences for different energy-related behaviours in Switzerland. We use an online choice-based conjoint analysis (N=150 to examine preferences for behaviours with high technical potentials for energy demand reduction in the following domains: mobility, heating and food. Each domain comprises different attributes across three levels of sufficiency. Respondents were confronted with trade-off situations evoked through different fictional lifestyles that comprised different combinations of attribute levels. Through a series of trade-off decisions, participants were asked to choose their preferred lifestyle. The results revealed that a vegetarian diet was considered the most critical issue that respondents were unwilling to trade off, followed by distance to workplace and means of transportation. The highest willingness to trade off was found for adjustments in room temperature, holiday travel behaviours, and living space. Participants’ preferences for the most energy-sufficient lifestyles were rather low. However, the study showed that there were lifestyles with substantive energy-saving potentials that were well accepted among respondents. Our study results suggest that the success of energy-sufficiency interventions might depend strongly on the targeted behaviour. We speculate that they may face strong resistance (e.g., vegetarian diet. Thus, it seems

  18. The electricity prices in the European Union. The role of renewable energies and regulatory electric market reforms

    International Nuclear Information System (INIS)

    Moreno, Blanca; López, Ana J.; García-Álvarez, María Teresa

    2012-01-01

    The European Union electricity market has been gradually liberalized since 1990s. Theoretically, competitive markets should lead to efficiency gains in the economy thus reducing electricity prices. However, there is a controversial debate about the real effects of the electricity liberalization on electricity prices. Moreover, the increased generation of electricity from renewable energies RES-E (Electricity from Renewable Energy Sources) is also integrated in wholesale market reducing wholesale prices, but the final effect over household prices is not clear. In order to contribute to this debate, this paper provides an empirical investigation into the electricity prices determinants. In fact we develop econometric panel models to explore the relationship between the household electricity prices and variables related to the renewable energy sources and the competition in generation electricity market. More specifically we use a panel data set provided by Eurostat and covering 27 European Union countries during the period 1998–2009. Our results suggest that electricity prices increase with the deployment of RES-E and with the expansion of greenhouse gas emissions produced by energy industries- as a European Union CO 2 emission trading scheme exists. Results also reveal that country's characteristics can affect household electricity prices. -- Highlights: ► Electricity liberalized markets should lead to reduce electricity prices. ► The use of renewable energies (RES) reduce wholesale electricity prices. ► However, household electricity prices are increasing in European Union. ► Panel data models are developed to investigate the effect of RES and electricity competition on household electricity prices. ► We find that the deployment of RES increases prices paid by consumers in a liberalized market.

  19. Spatial energy market risk analysis using the semivariance risk measure

    International Nuclear Information System (INIS)

    Yu, Zuwei

    2007-01-01

    The paper concentrates on the analysis of semivariance (SV) as a market risk measure for market risk analysis of mean-semivariance (MSV) portfolios. The advantage of MSV over variance as a risk measure is that MSV provides a more logical measure of risk than the MV method. In addition, the relationship of the SV with the lower partial movements is discussed. A spatial risk model is proposed as a basis of risk assessment for short-term energy markets. Transaction costs and other practical constraints are also included. A case study is provided to show the successful application of the model. (author)

  20. Measuring and improving the public perceptions on nuclear energy

    International Nuclear Information System (INIS)

    Choi, Young Sung

    2001-01-01

    The purpose of this paper is to measure the public's perception on risk and benefit of nuclear power and to find ways to improve the perceptions. Latent Class Analysis is adopted for the perception measures, which quantify people's perception and reveal the perception structure. The measures resulted from Latent Class Analysis show that women perceive risks to be more existent and benefits to be less than men do. Moreover there is a tendency that if education level is high, perceived risk is low and perceived benefit is high. The perception of risk and benefit also depends on different channels through which people get information about nuclear energy. Comparing seven different information channels, the most effective ways of communicating with people to improve the risk and benefit perception of nuclear energy are found to be the visit to nuclear plants and the education through the regular schooling. Information dissemination through mass media is only effective to the benefit perception

  1. A beam energy measurement system at NIRS-930 cyclotron

    International Nuclear Information System (INIS)

    Hojo, S.; Honma, T.; Sakamoto, Y.; Miyahara, N.; Okada, T.; Komatsu, K.; Tsuji, N.; Yamada, S.

    2005-01-01

    A beam energy measurement system employing a set of capacitive probes has been developed at NIRS-930 cyclotron. Principle of the measurement is applying a modified-TOF method, so that the two proves are installed at one of the straight section in the beam transport line. Usually they are separated about 5.8 m, which is equivalent to the almost final path length of the beam extracted in the cyclotron. In the measurement, two beam signals are superimposed by adjusting a position of the downstream-probe along the beam direction with watching an oscilloscope screen roughly. In order to determine the beam energy accurately the signals are processed by MCA with suitable electric module. (author)

  2. Measuring and evaluating energy consumption in street lighting networks

    International Nuclear Information System (INIS)

    Janiga, P.; Gasparovsky, D.

    2012-01-01

    Smart metering and smart grid are incoming technologies that provide new opportunities in various fields. In connection with the issue of evaluation of the energy aspects of public lighting networks opens up the possibility of evaluating and measuring consumption. Based on the obtained values would be possible to determine energy consumption of lighting systems. This obtained value could serve as a basis for comparing the relevant networks and thus the optimality assessment of lighting designs. Currently, the measure placed in the switchboard of public lighting. If we have considered sections parametramim same lighting, it is necessary to obtain more value from the measured or determined to assess the consumption of time. Proposal of such methods is still under construction but the basic methods have already been outlined. (Authors)

  3. Energy Measurement of Hadrons with the CERN ATLAS Calorimeter

    CERN Document Server

    Speckmayer, Peter; Fabjan, Christian Wolfgang

    2008-01-01

    The ATLAS detector is a multi-purpose detector measuring the energy and direction of particles produced in proton-proton collisions at a center of mass energy of 14 TeV provided by the Large Hadron Collider at the European center of particle physics, CERN. The main aim of this thesis is to assess the precision of the present understanding of the interactions of hadrons with matter (as implemented in Monte Carlo (MC) simulations) to describe the response of the ATLAS calorimeter and to predict the correction necessary to measure the full energy of pions. The simulations are compared to testbeam data. The present description of the response of the ATLAS central calorimeter is able to predict the energy corrections, as verified by using testbeam data. For the Combined Testbeam 2004 (CTB) a full slice of the central region of the ATLAS detector including all sub-detectors has been installed in the H8 beam line of the CERN SPS accelerator. Pions and electrons with the energies ranging from 1 to 350 GeV have been m...

  4. On natural gas pricing reform in China

    Directory of Open Access Journals (Sweden)

    Aolin Hu

    2015-10-01

    Full Text Available Since April 1, 2015, for those non-residential gas users, the stock gas and incremental gas prices have been unified, and direct-supply gas prices have been released. This means that natural gas pricing reform has entered a new stage of development in China. In view of this, we first summarized and analyzed the achievements, status quo and existing problems in natural gas pricing reform in recent years in China. Then, we made an overview on the global natural gas pricing and marketing experiences and domestic situation in natural gas sector. On this basis, we presented the following proposals and implement approaches to ultimately achieving the market-oriented reform of natural gas pricing in China. First, the ex-factory prices for those residential gas users will be adjusted, which should be differentiated from those for the non-residential gas users. Second, the present natural gas pricing mechanism should be perfected with pipeline fees and gas storage fees being both added. Third, an integrated natural gas pricing system should be improved with differential prices implemented. Fourth, natural gas spot transaction should be promoted and energy measurement in gas metering and pricing should also be put into practice.

  5. Measurements of proton energy spectra using a radiochromic film stack

    Science.gov (United States)

    Filkins, T. M.; Steidle, Jessica; Ellison, D. M.; Steidle, Jeffrey; Freeman, C. G.; Padalino, S. J.; Fiksel, G.; Regan, S. P.; Sangster, T. C.

    2014-10-01

    The energy spectrum of protons accelerated from the rear-side of a thin foil illuminated with ultra-intense laser light from the OMEGA EP laser system at the University of Rochester's Laboratory for Laser Energetics (LLE) was measured using a stack of radiochromic film (RCF). The film stack consisted of four layers of Gafchromic HD-V2 film and four layers of Gafchromic MD-V2-55 film. Aluminum foils of various thicknesses were placed between each piece of RCF in the stack. This arrangement allowed protons with energies of 30 MeV to reach the back layer of RCF in the stack. The stack was placed in the detector plane of a Thomson parabola ion energy (TPIE) spectrometer. Each piece of film in the stack was scanned using a commercially available flat-bed scanner (Epson 10000XL). The resulting optical density was converted into proton fluence using an absolute calibration of the RCF obtained at the SUNY Geneseo 1.7 MV Pelletron accelerator laboratory. In these calibration measurements, the sensitivity of the radiochromic film was measured using monoenergetic protons produced by the accelerator. Details of the analysis procedure and the resulting proton energy spectra will be presented. Funded in part by a grant from the DOE through the Laboratory for Laser Energetics.

  6. 10 CFR 431.16 - Test procedures for the measurement of energy efficiency.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Test procedures for the measurement of energy efficiency. 431.16 Section 431.16 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR... Methods of Determining Efficiency § 431.16 Test procedures for the measurement of energy efficiency. For...

  7. 10 CFR 431.444 - Test procedures for the measurement of energy efficiency.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Test procedures for the measurement of energy efficiency. 431.444 Section 431.444 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR... procedures for the measurement of energy efficiency. (a) Scope. Pursuant to section 346(b)(1) of EPCA, this...

  8. Electron Identification and Energy Measurement with Emulsion Cloud Chamber

    Science.gov (United States)

    Kitagawa, Nobuko; Komatsu, Masahiro

    Charged particles undergo the Multiple Coulomb Scattering (MCS) when passing through a material. Their momentum can be estimated from the distribution of the scattering angle directly. Angle of electrons (or positrons) largely changes because of the energy loss in bremsstrahlung, and they are distinguished from other charged particles by making use of its feature. Electron energy is generally measured by counting of electromagnetic shower (e.m. shower) tracks in Emulsion Cloud Chamber (ECC), so enough absorber material is needed to develop the shower. In the range from sub-GeV to a few GeV, electrons don't develop noticeable showers. In order to estimate the energy of electrons in this range with a limited material, we established the new method which is based on the scattering angle considering the energy loss in bremsstrahlung. From the Monte Carlo simulation (MC) data, which is generated by electron beam (0.5 GeV, 1 GeV, 2 GeV) exposure to ECC, we derived the correlation between energy and scattering angle in each emulsion layer. We fixed the function and some parameters which 1 GeV MC sample would return 1 GeV as the center value, and then applied to 0.5 GeV and 2 GeV sample and confirmed the energy resolution about 50% within two radiation length.

  9. MEASUREMENTS OF TOTAL ENERGY RADIATED FROM AN ARGON ARCJET

    Science.gov (United States)

    to the 7.2 power when the peak (centerline) temperature at the arcjet exit plane was 23,000 R. Total radiated energy from the arcjet , including the...downstream-directed component from the cathode face, was found to be less than 0.8% of the net jet power under these conditions. This rather low level...The total energy radiation of an argon arcjet was measured by a simple collimated thermopile. Radiation from the luminous jet was found to vary as T

  10. TLD gamma-ray energy deposition measurements in the zero energy fast reactor ZEBRA

    International Nuclear Information System (INIS)

    Knipe, A.D.

    1977-01-01

    A recent study of gamma-ray energy deposition was carried out in the Zebra reactor at AEE Winfrith during a collaborative programme between the UKAEA and PNC of Japan. The programme was given the title MOZART. This paper describes the TLD experiments in the MOZART MZB assembly and discusses the technique and various corrections necessary to relate the measured quantity to the calculated energy deposition

  11. Radial Microchannel Reactor (RMR) used in Steam Reforming CH4

    Science.gov (United States)

    2013-05-13

    Microchannel Reactor , (RMR) used in Steam Reforming CH4 Details 5) Supported Hydrogen Permeable Membrane 6) P&E MFMR Integration with PCI steam reformer... Reactor (RMR) architecture and reports the achieved breakthroughs in heat transfer and thermal efficiency in the catalytic steam reforming of methane...Radial Microchannel Reactor , (RMR) used in Steam Reforming CH$ N00014-11-C-0194 Peter R. Bossard, Ph.D. Power & Energy, Inc. 106 Railroad Drive, Ivyland

  12. Reforming the Russian electricity market

    International Nuclear Information System (INIS)

    Valladares, Mayra Rodriguez

    1999-08-01

    Contains Executive Summary and Chapters on: Overview; Russian energy markets; Evolution of the power sector; The electricity market; Regulation and proposed reforms; Politics in the power sector; Economics of the power sector; Regional differences; Foreign involvement; Valuation and company management; Conclusions. (Author)

  13. Measurement of the nucleon structure function using high energy muons

    Energy Technology Data Exchange (ETDEWEB)

    Meyers, P.D.

    1983-12-01

    We have measured the inclusive deep inelastic scattering of muons on nucleons in iron using beams of 93 and 215 GeV muons. To perform this measurement, we have built and operated the Multimuon Spectrometer (MMS) in the muon beam at Fermilab. The MMS is a magnetized iron target/spectrometer/calorimeter which provides 5.61 kg/cm/sup 2/ of target, 9% momentum resolution on scattered muons, and a direct measure of total hadronic energy with resolution sigma/sub nu/ = 1.4..sqrt..nu(GeV). In the distributed target, the average beam energies at the interaction are 88.0 and 209 GeV. Using the known form of the radiatively-corrected electromagnetic cross section, we extract the structure function F/sub 2/(x,Q/sup 2/) with a typical precision of 2% over the range 5 < Q/sup 2/ < 200 GeV/sup 2//c/sup 2/. We compare our measurements to the predictions of lowest order quantum chromodynamics (QCD) and find a best fit value of the QCD scale parameter ..lambda../sub LO/ = 230 +- 40/sup stat/ +- 80/sup syst/ MeV/c, assuming R = 0 and without applying Fermi motion corrections. Comparing the cross sections at the two beam energies, we measure R = -0.06 +- 0.06/sup stat/ +- 0.11/sup syst/. Our measurements show qualitative agreement with QCD, but quantitative comparison is hampered by phenomenological uncertainties. The experimental situation is quite good, with substantial agreement between our measurements and those of others. 86 references.

  14. Resource Evaluation and Energy Production Estimate for a Tidal Energy Conversion Installation using Acoustic Flow Measurements

    Science.gov (United States)

    Gagnon, Ian; Baldwin, Ken; Wosnik, Martin

    2015-11-01

    The ``Living Bridge'' project plans to install a tidal turbine at Memorial Bridge in the Piscataqua River at Portsmouth, NH. A spatio-temporal tidal energy resource assessment was performed using long term bottom-deployed Acoustic Doppler Current Profilers ADCP. Two locations were evaluated: at the planned deployment location and mid-channel. The goal was to determine the amount of available kinetic energy that can be converted into usable electrical energy on the bridge. Changes in available kinetic energy with ebb/flood and spring/neap tidal cycles and electrical energy demand were analyzed. A system model is used to calculate the net energy savings using various tidal generator and battery bank configurations. Differences in the tidal characteristics between the two measurement locations are highlighted. Different resource evaluation methodologies were also analyzed, e.g., using a representative ADCP ``bin'' vs. a more refined, turbine-geometry-specific methodology, and using static bin height vs. bin height that move w.r.t. the free surface throughout a tidal cycle (representative of a bottom-fixed or floating turbine deployment, respectively). ADCP operating frequencies and bin sizes affect the standard deviation of measurements, and measurement uncertainties are evaluated. Supported by NSF-IIP grant 1430260.

  15. Environmental fiscal reforms

    Directory of Open Access Journals (Sweden)

    Ashish Chaturvedi

    2014-09-01

    Full Text Available The paper presents concepts and instruments of environmental fiscal reforms (EFR and their application in the Indian context. EFR can lead to environmental improvement more efficiently and cost effectively than traditional regulation. There is substantial experience of successful EFR implementation in the European Union. India has also adopted some EFR measures such as deregulation of petrol prices, coal cess, and subsidy for setting up common effluent treatment plants. The challenges of implementing EFR measures in India are also discussed, including inadequate analysis, policy framework and institutional capacity, as well as conflict with poverty reduction and building political support.

  16. Measuring intensive care unit performance after sustainable growth rate reform: An example with the National Quality Forum metrics.

    Science.gov (United States)

    Nguyen, Albert P; Hyder, Joseph A; Wanta, Brendan T; Stelfox, Henry T; Schmidt, Ulrich

    2016-12-01

    Performance measurement is essential for quality improvement and is inevitable in the shift to value-based payment. The National Quality Forum is an important clearinghouse for national performance measures in health care in the United States. We reviewed the National Quality Forum library of performance measures to highlight measures that are relevant to critical care medicine, and we describe gaps and opportunities for the future of performance measurement in critical care medicine. Crafting performance measures that address core aspects of critical care will be challenging, as current outcome and performance measures have problems with validity. Future quality measures will likely focus on interdisciplinary measures across the continuum of patient care. Copyright © 2016 Elsevier Inc. All rights reserved.

  17. Low-energy house in Sisimiut - Measurement equipment

    Energy Technology Data Exchange (ETDEWEB)

    Hvidthoeft Delff Andersen, P.; Rode, C.; Madsen, Henrik

    2013-08-15

    This paper documents the measurement equipment in a low-energy house in Sisimiut, Greenland. Detailed measurements are being taken on energy consumption, indoor temperatures, floor heating, ventilation, open/closed state of doors and windows, and indoors climate. Equipped with a central control unit, experiments can be designed in order to study heat dynamics of the building. It is described how to plan and execute such experiments in one apartment in the building. The building also features both a solar thermal system and extra buffer tank facilitating testing of storage strategies on the power generated by the solar thermal system. A weather station equipped with thermometer, pyranometer and anemometer is installed on the building as well. Finally, it is described how to retrieve data from an SQL server which is configured to take monthly backups. R functions have been implemented to fetch and prepare the data for time series analysis. Examples are given on the use of these. (Author)

  18. Possible Measurable Effects of Dark Energy in Rotating Superconductors

    Directory of Open Access Journals (Sweden)

    Clovis Jacinto de Matos

    2009-01-01

    Full Text Available We discuss recent laboratory experiments with rotating superconductors and show that three so far unexplained experimentally observed effects (anomalous acceleration signals, anomalous gyroscope signals, Cooper pair mass excess can be physically explained in terms of a possible interaction of dark energy with Cooper pairs. Our approach is based on a Ginzburg-Landau-like model of electromagnetic dark energy, where gravitationally active photons obtain mass in the superconductor. We show that this model can account simultaneously for the anomalous acceleration and anomalous gravitomagnetic fields around rotating superconductors measured by Tajmar et al. and for the anomalous Cooper pair mass in superconductive Niobium, measured by Cabrera and Tate. It is argued that these three different physical effects are ultimately different experimental manifestations of the simultaneous spontaneous breaking of gauge invariance and of the principle of general covariance in superconductive materials.

  19. Solar Reforming of Carbon Dioxide to Produce Diesel Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Dennis Schuetzle; Robert Schuetzle

    2010-12-31

    Measurement Methods for Assessing Contaminant Levels in Captured CO2 Streams; (3) An Assessment of Current Commercial Scale Fisher-Tropsch (F-T) Technologies for the Conversion of Syngas to Fuels; (4) An Overview of CO2 Capture Technologies from Various Industrial Sources; and (5) Lifecycle Analysis for the Capture and Conversion of CO2 to Synthetic Diesel Fuel. Commercial scale Sunexus CO2 Solar Reformer plant designs, proposed in this report, should be able to utilize waste CO2 from a wide variety of industrial sources to produce a directly usable synthetic diesel fuel that replaces petroleum derived fuel, thus improving the United States energy security while also sequestering CO2. Our material balance model shows that every 5.0 lbs of CO2 is transformed using solar energy into 6.26 lbs (1.0 U.S. gallon) of diesel fuel and into by-products, which includes water. Details are provided in the mass and energy model in this report.

  20. Measures of International Manufacturing and Trade of Clean Energy Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Engel-Cox, Jill; Sandor, Debbie; Keyser, David; Mann, Margaret

    2017-05-25

    The technologies that produce clean energy, such as solar photovoltaic panels and lithium ion batteries for electric vehicles, are globally manufactured and traded. As demand and deployment of these technologies grows exponentially, the innovation to reach significant economies of scale and drive down energy production costs becomes less in the technology and more in the manufacturing of the technology. Manufacturing innovations and other manufacturing decisions can reduce costs of labor, materials, equipment, operating costs, and transportation, across all the links in the supply chain. To better understand the manufacturing aspect of the clean energy economy, we have developed key metrics for systematically measuring and benchmarking international manufacturing of clean energy technologies. The metrics are: trade, market size, manufacturing value-added, and manufacturing capacity and production. These metrics were applied to twelve global economies and four representative technologies: wind turbine components, crystalline silicon solar photovoltaic modules, vehicle lithium ion battery cells, and light emitting diode packages for efficient lighting and other consumer products. The results indicated that clean energy technologies are being developed via complex, dynamic, and global supply chains, with individual economies benefiting from different technologies and links in the supply chain, through both domestic manufacturing and global trade.

  1. Measurement of energy deposition near heavy ion tracks

    International Nuclear Information System (INIS)

    Metting, N.F.; Brady, L.A.; Rossi, H.H.; Kliauga, P.J.; Howard, J.; Wong, M.; Schimmerling, W.; Rapkin, M.

    1985-01-01

    In November of 1982 work was begun in collaboration with Columbia University and Lawrence Berkeley Laboratory to use microdosimetric methods to measure energy deposition of heavy ions produced at LBL's Bevalac Biomedical Facility. Last year the authors reported preliminary results indicating that secondary charged particle equilibrium was probably obtained using this experimental setup, but that there seemed to be poor spatial resolution in the solid state position-sensitive detector. Further analysis of the measurements taken in August 1983 shows that because of this electronic noise in the position-sensitive detector, only the 56 Fe data yielded useful microdosimetric spectra

  2. Measurement of the Electron Structure Function at LEP energies

    CERN Document Server

    Abdallah, J; Adam, W; Adzic, P; Albrecht, T; Alemany-Fernandez, R; Allmendinger, T; Allport, P P; Amaldi, U; Amapane, N; Amato, S; Anashkin, E; Andreazza, A; Andringa, S; Anjos, N; Antilogus, P; Apel, W-D; Arnoud, Y; Ask, S; Asman, B; Augustin, J E; Augustinus, A; Baillon, P; Ballestrero, A; Bambade, P; Barbier, R; Bardin, D; Barker, G J; Baroncelli, A; Battaglia, M; Baubillier, M; Becks, K-H; Begalli, M; Behrmann, A; Ben-Haim, E; Benekos, N; Benvenuti, A; Berat, C; Berggren, M; Bertrand, D; Besancon, M; Besson, N; Bloch, D; Blom, M; Bluj, M; Bonesini, M; Boonekamp, M; Booth, P S L; Borisov, G; Botner, O; Bouquet, B; Bowcock, T J V; Boyko, I; Bracko, M; Brenner, R; Brodet, E; Bruckman, P; Brunet, J M; Buschbeck, B; Buschmann, P; Calvi, M; Camporesi, T; Canale, V; Carena, F; Castro, N; Cavallo, F; Chapkin, M; Charpentier, Ph; Checchia, P; Chierici, R; Chliapnikov, P; Chudoba, J; Chung, S U; Cieslik, K; Collins, P; Contri, R; Cosme, G; Cossutti, F; Costa, M J; Crennell, D; Cuevas, J; D'Hondt, J; da Silva, T; Da Silva, W; Della Ricca, G; De Angelis, A; De Boer, W; De Clercq, C; De Lotto, B; De Maria, N; De Min, A; de Paula, L; Di Ciaccio, L; Di Simone, A; Doroba, K; Drees, J; Eigen, G; Ekelof, T; Ellert, M; Elsing, M; Espirito Santo, M C; Fanourakis, G; Fassouliotis, D; Feindt, M; Fernandez, J; Ferrer, A; Ferro, F; Flagmeyer, U; Foeth, H; Fokitis, E; Fulda-Quenzer, F; Fuster, J; Gandelman, M; Garcia, C; Gavillet, Ph; Gazis, E; Gokieli, R; Golob, B; Gomez-Ceballos, G; Goncalves, P; Graziani, E; Grosdidier, G; Grzelak, K; Guy, J; Haag, C; Hallgren, A; Hamacher, K; Hamilton, K; Haug, S; Hauler, F; Hedberg, V; Hennecke, M; Hoffman, J; Holmgren, S-O; Holt, P J; Houlden, M A; Jackson, J N; Jarlskog, G; Jarry, P; Jeans, D; Johansson, E K; Jonsson, P; Joram, C; Jungermann, L; Kapusta, F; Katsanevas, S; Katsoufis, E; Kernel, G; Kersevan, B P; Kerzel, U; King, B T; Kjaer, N J; Kluit, P; Kokkinias, P; Kourkoumelis, C; Kouznetsov, O; Krumstein, Z; Kucharczyk, M; Lamsa, J; Leder, G; Ledroit, F; Leinonen, L; Leitner, R; Lemonne, J; Lepeltier, V; Lesiak, T; Liebig, W; Liko, D; Lipniacka, A; Lopes, J H; Lopez, J M; Loukas, D; Lutz, P; Lyons, L; MacNaughton, J; Malek, A; Maltezos, S; Mandl, F; Marco, J; Marco, R; Marechal, B; Margoni, M; Marin, J-C; Mariotti, C; Markou, A; Martinez-Rivero, C; Masik, J; Mastroyiannopoulos, N; Matorras, F; Matteuzzi, C; Mazzucato, F; Mazzucato, M; Mc Nulty, R; Meroni, C; Migliore, E; Mitaroff, W; Mjoernmark, U; Moa, T; Moch, M; Moenig, K; Monge, R; Montenegro, J; Moraes, D; Moreno, S; Morettini, P; Mueller, U; Muenich, K; Mulders, M; Mundim, L; Murray, W; Muryn, B; Myatt, G; Myklebust, T; Nassiakou, M; Navarria, F; Nawrocki, K; Nemecek, S; Nicolaidou, R; Nikolenko, M; Oblakowska-Mucha, A; Obraztsov, V; Olshevski, A; Onofre, A; Orava, R; Osterberg, K; Ouraou, A; Oyanguren, A; Paganoni, M; Paiano, S; Palacios, J P; Palka, H; Papadopoulou, Th D; Pape, L; Parkes, C; Parodi, F; Parzefall, U; Passeri, A; Passon, O; Peralta, L; Perepelitsa, V; Perrotta, A; Petrolini, A; Piedra, J; Pieri, L; Pierre, F; Pimenta, M; Piotto, E; Podobnik, T; Poireau, V; Pol, M E; Polok, G; Pozdniakov, V; Pukhaeva, N; Pullia, A; Radojicic, D; Rebecchi, P; Rehn, J; Reid, D; Reinhardt, R; Renton, P; Richard, F; Ridky, J; Rivero, M; Rodriguez, D; Romero, A; Ronchese, P; Roudeau, P; Rovelli, T; Ruhlmann-Kleider, V; Ryabtchikov, D; Sadovsky, A; Salmi, L; Salt, J; Sander, C; Savoy-Navarro, A; Schwickerath, U; Sekulin, R; Siebel, M; Sisakian, A; Slominski, W; Smadja, G; Smirnova, O; Sokolov, A; Sopczak, A; Sosnowski, R; Spassov, T; Stanitzki, M; Stocchi, A; Strauss, J; Stugu, B; Szczekowski, M; Szeptycka, M; Szumlak, T; Szwed, J; Tabarelli, T; Tegenfeldt, F; Timmermans, J; Tkatchev, L; Tobin, M; Todorovova, S; Tome, B; Tonazzo, A; Tortosa, P; Travnicek, P; Treille, D; Tristram, G; Trochimczuk, M; Troncon, C; Turluer, M L; Tyapkin, I A; Tyapkin, P; Tzamarias, S; Uvarov, V; Valenti, G; Van Dam, P; Van Eldik, J; van Remortel, N; Van Vulpen, I; Vegni, G; Veloso, F; Venus, W; Verdier, P; Verzi, V; Vilanova, D; Vitale, L; Vrba, V; Wahlen, H; Washbrook, A J; Weiser, C; Wicke, D; Wickens, J; Wilkinson, G; Winter, M; Witek, M; Yushchenko, O; Zalewska, A; Zalewski, P; Zavrtanik, D; Zhuravlov, V; Zimin, N I; Zintchenko, A; Zupan, M

    2010-01-01

    The hadronic part of the Electron Structure Function (ESF) has been measured for the first time, using e+e- data collected by the DELPHI experiment at LEP, at centre-of-mass energies sqrt(s) = 91.2-209.5 GeV. The data analysis is simpler than that of the measurement of the photon structure function. The ESF data are compared to predictions of phenomenological models based on the photon structure function. It is shown that the quasi-real photon virtuality contribution is significant. The presented data can serve as a cross-check of the photon structure function analyses and help in refining existing parametrizations.

  3. Governing China’s Clean Energy Transition: Policy Reforms, Flexible Implementation and the Need for Empirical Investigation

    Directory of Open Access Journals (Sweden)

    Kevin Lo

    2015-11-01

    Full Text Available In the ten years since committing to clean energy transition, China has formulated a large number of policies and programs to achieve some very ambitious targets. This paper argues that the dearth of empirical studies concerning the implementation of these new policies and programs has created a knowledge gap between official policy documents, which are vague and lacking in specifics, and official policy outcomes, which are unreliable. In particular, the merits and limitations of flexible implementation with regard to desirable outcomes need to be debated and clarified. This paper calls for more empirical investigation in four areas as a starting point: (1 the nature and extent of flexibility in the implementation; (2 implementation strategies and their impacts; (3 factors that shape the behavior of local officials responsible for implementation; and (4 the relationship between the central-local relation and policy implementation.

  4. 76 FR 74050 - Measured Building Energy Performance Data Taxonomy

    Science.gov (United States)

    2011-11-30

    ... Cody Taylor, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building... Survey, the Residential Energy Consumption Survey, University of Dayton, ENERGY STAR, and the General...

  5. [Thermal energy utilization analysis and energy conservation measures of fluidized bed dryer].

    Science.gov (United States)

    Xing, Liming; Zhao, Zhengsheng

    2012-07-01

    To propose measures for enhancing thermal energy utilization by analyzing drying process and operation principle of fluidized bed dryers,in order to guide optimization and upgrade of fluidized bed drying equipment. Through a systematic analysis on drying process and operation principle of fluidized beds,the energy conservation law was adopted to calculate thermal energy of dryers. The thermal energy of fluidized bed dryers is mainly used to make up for thermal consumption of water evaporation (Qw), hot air from outlet equipment (Qe), thermal consumption for heating and drying wet materials (Qm) and heat dissipation to surroundings through hot air pipelines and cyclone separators. Effective measures and major approaches to enhance thermal energy utilization of fluidized bed dryers were to reduce exhaust gas out by the loss of heat Qe, recycle dryer export air quantity of heat, preserve heat for dry towers, hot air pipes and cyclone separators, dehumidify clean air in inlets and reasonably control drying time and air temperature. Such technical parameters such air supply rate, air inlet temperature and humidity, material temperature and outlet temperature and humidity are set and controlled to effectively save energy during the drying process and reduce the production cost.

  6. Ecological tax reform

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    An environmental tax reform is seen by many as a possible solution to some crucial problems of modern society - pollution, excessive resource consumption and unemployment. Changes in the system of taxation are here seen as a long term process, one that must cheapen the costs of labour and make the costs of resource use more expensive - a process which can also create major changes in our society as to conceptions of quality, work, consumption etc. The conference presented proposals for an ecological tax and duty system that would contribute to: Changing technology so that it becomes more resource and energy effective. Changing the economic mechanisms so that resource consumption and pollution become more expensive while human resources become cheaper. Changing personal life styles and values so that material consumption becomes less decisive for our choices and priorities. An environmental tax reform is neither without problems nor painless. An economy and an industrial sector based on increasing consumption of energy and raw materials will, in the long run, lead to drawbacks that far outweigh those that are connected with an economic re-orientation whose driving force is another conception of nature. (EG)

  7. Ecological tax reform

    International Nuclear Information System (INIS)

    1996-01-01

    An environmental tax reform is seen by many as a possible solution to some crucial problems of modern society - pollution, excessive resource consumption and unemployment. Changes in the system of taxation are here seen as a long term process, one that must cheapen the costs of labour and make the costs of resource use more expensive - a process which can also create major changes in our society as to conceptions of quality, work, consumption etc. The conference presented proposals for an ecological tax and duty system that would contribute to: Changing technology so that it becomes more resource and energy effective. Changing the economic mechanisms so that resource consumption and pollution become more expensive while human resources become cheaper. Changing personal life styles and values so that material consumption becomes less decisive for our choices and priorities. An environmental tax reform is neither without problems nor painless. An economy and an industrial sector based on increasing consumption of energy and raw materials will, in the long run, lead to drawbacks that far outweigh those that are connected with an economic re-orientation whose driving force is another conception of nature. (EG)

  8. Energy efficiency in intensive livestock Estonia. Energy-saving measures on poultry farms

    Energy Technology Data Exchange (ETDEWEB)

    Annuk, A.; Nurste, H.; Damskier, S.S.

    2004-07-01

    The overall purpose of this report on energy-saving measures is to provide the Estonian Ministry of Economics and Communication with an overview of the energy consumption on poultry farms at a national level. This report compromises detailed information on energy consumption per ton of broiler meat, egg and young laying hen produced in Estonia and Denmark, respectively, based on field investigations and Danish statistics. To collect information on electricity consumption within Estonian poultry farming on a national level, three pilot farms were analysed with regard to the use of energy consumption on each farm. Results from the three farms are presented in Appendix 1. In addition, a calculation of national energy consumption within chicken meet production, egg production and breeding of young laying hens is presented in this report. The calculation shows the difference between the Danish and Estonian energy consumption on poultry farms. This report presents a proposal for a ten-year development plan for the reduction of the energy consumption on Estonian poultry farms. (au)

  9. The effect of building regulations and energy conservation measures in domestic sector on national energy consumption

    International Nuclear Information System (INIS)

    Samo, S.R.; Akhund, M.A.; Brohi, K.M.

    2004-01-01

    In England, housing accounts for some 30% of total fuel consumption and a similar proportion of energy-related carbon dioxide (CO/sub 2/) emission. A study has been conducted to analyse the effect of the legislations and UK thermal building regulations on national energy consumption in housing. This research paper presents data on the percentage of dwelling stock, the energy consumption, energy cost and carbon dioxide (CO/sub 2/) emission in different types of dwellings, which comply different building regulations from 1965 to 1995. It was found that. 66% of the dwelling stock, which comply the building Regulations before 1965, consumes 73% of total energy used in housing. This dwelling stock is also responsible for 75% of carbon dioxide (CO/sub 2/) emission. Whereas currently only 4% of the dwelling stock complies the latest building regulations 1995 which consume 2 % of energy and produce a similar percentage of carbon dioxide (CO/sub 2/) emission in housing. Since the large portion of the dwelling stock is comprised of old dwellings, therefore the greatest potential for energy conservation measures can be found in improving these dwellings instead of constructing new dwellings. (author)

  10. Field use of D218O to measure energy expenditure of soldiers at different energy intakes

    International Nuclear Information System (INIS)

    DeLany, J.P.; Schoeller, D.A.; Hoyt, R.W.; Askew, E.W.; Sharp, M.A.

    1989-01-01

    To test the application of doubly labeled water under adverse field conditions, energy expenditures of 16 special operations soldiers were measured during a 28-day field training exercise. Subjects were matched by fat-free mass and divided equally between an ad libitum ready-to-eat meal diet and a 2,000 kcal/day lightweight ration. Subjects recorded intakes daily, and body composition was measured before and after the exercise. At the beginning of the study, subjects moved to a new northerly location and, therefore, a new water supply. To compensate for this, a group of soldiers who did not receive heavy water was followed to measure isotopic base-line changes. Energy expenditure by doubly labeled water was in agreement with intake/balance (3,400 ± 260 vs. 3,230 ± 520 kcal/day). The overall coefficient of variation of energy expenditure by doubly labeled water was half that of intake/balance (7.6 vs. 16.1%). The coefficient of variation of repeat measures with doubly labeled water was 7.3%. Energy expenditure of the ready-to-eat meal group, 3,540 ± 180 kcal/day, was not significantly different from the lightweight ration group, 3,330 ± 301 kcal/day. Doubly labeled water was valid under field conditions

  11. Probe method of measuring the electron energy distribution in plasmas

    International Nuclear Information System (INIS)

    Amemiya, Hiroshi

    1984-01-01

    The function for the velocity distribution of electrons in plasma in a basic function associated with various phenomena. The probe method gives the distribution by a simple technique to insert a micro-electrode into plasma, and has good spatial resolution. It is specifically useful for weakly ionized, low temperature plasma. The purpose of this paper is to assist experimenters so that they can easily use this method for various phenomena by starting at its basic principle and explaining the scope of application and actual measuring techniques. The scope of application is considered by dividing it into the problems of sheath thickness, collision effect, the energy distribution of beam, the influence of probe end, probe surface phenomenon, magnetized plasma, the measurement of high energy tail, etc. For sheath thickness, it is accepted if the difference between sheath radius and probe radius is shorter than mean free path, and this is a measure for the application limit. The probe method is applicable as far as the beam density is far smaller than plasma density, and the symmetry of positive ion sheath is not disturbed. The surface area of a counter electrode should be 10 4 .Rc/lambda times or more of the probe surface area, where Rc is the radius of a counter electrode. The differentiation method of the probe characteristics includes A.C. method, high speed sweep measurement or digital method, and some applications are described. (Wakatsuki, Y.)

  12. Multiloop atom interferometer measurements of chameleon dark energy in microgravity

    Science.gov (United States)

    Chiow, Sheng-wey; Yu, Nan

    2018-02-01

    Chameleon field is one of the promising candidates of dark energy scalar fields. As in all viable candidate field theories, a screening mechanism is implemented to be consistent with all existing tests of general relativity. The screening effect in the chameleon theory manifests its influence limited only to the thin outer layer of a bulk object, thus producing extra forces orders of magnitude weaker than that of the gravitational force of the bulk. For pointlike particles such as atoms, the depth of screening is larger than the size of the particle, such that the screening mechanism is ineffective and the chameleon force is fully expressed on the atomic test particles. Extra force measurements using atom interferometry are thus much more sensitive than bulk mass based measurements, and indeed have placed the most stringent constraints on the parameters characterizing chameleon field. In this paper, we present a conceptual measurement approach for chameleon force detection using atom interferometry in microgravity, in which multiloop atom interferometers exploit specially designed periodic modulation of chameleon fields. We show that major systematics of the dark energy force measurements, i.e., effects of gravitational forces and their gradients, can be suppressed below all hypothetical chameleon signals in the parameter space of interest.

  13. Measuring the electron beam energy in a magnetic bunch compressor

    International Nuclear Information System (INIS)

    Hacker, Kirsten

    2010-09-01

    Within this thesis, work was carried out in and around the first bunch compressor chicane of the FLASH (Free-electron LASer in Hamburg) linear accelerator in which two distinct systems were developed for the measurement of an electron beams' position with sub-5 μm precision over a 10 cm range. One of these two systems utilized RF techniques to measure the difference between the arrival-times of two broadband electrical pulses generated by the passage of the electron beam adjacent to a pickup antenna. The other system measured the arrival-times of the pulses from the pickup with an optical technique dependent on the delivery of laser pulses which are synchronized to the RF reference of the machine. The relative advantages and disadvantages of these two techniques are explored and compared to other available approaches to measure the same beam property, including a time-of-flight measurement with two beam arrival-time monitors and a synchrotron light monitor with two photomultiplier tubes. The electron beam position measurement is required as part of a measurement of the electron beam energy and could be used in an intra-bunch-train beam-based feedback system that would stabilize the amplitude of the accelerating field. By stabilizing the accelerating field amplitude, the arrival-time of the electron beam can be made more stable. By stabilizing the electron beam arrival-time relative to a stable reference, diagnostic, seeding, and beam-manipulation lasers can be synchronized to the beam. (orig.)

  14. Malaysian water sector reform : policy and performance

    NARCIS (Netherlands)

    Kim, C.T.

    2012-01-01

    One of the measures that can help developing countries in meeting Target 10 of the Millennium Development Goals – halving the number of people without access to water and adequate sanitation by 2015 – is through a water sector reform. In this research the Malaysian water sector reform is

  15. Measuring and Controlling the Energy Spread in CEBAF

    CERN Document Server

    Krafft, G A; Dickson, R W; Kazimi, R; Lebedev, V A; Tiefenback, M G

    2000-01-01

    As compared to electron storage rings, one advantage of recirculating linear accelerators is that the beam properties at target are no longer dominated by the equilibrium between quantum radiative diffusion and radiation damping because new beam is continually injected into the accelerator. This allows the energy spread from a CEBAF-type machine to be relatively small; the measured energy spread from CEBAF at 4 GeV is less than 100 parts per million accumulated over times of order several days. In this paper, the various subsystems contributing to the energy spread of a CEBAF-type accelerator are reviewed, as well as the machine diagnostics and controls that are used in CEBAF to ensure that a small energy spread is provided during routine running. Examples of relevant developments are (1) stable short bunches emerging from the injector, (2) precision timing and phasing of the linacs with respect to the centroid of the beam bunches on all passes, (3) implementing 2 kHz sampling rate feedback systems for final ...

  16. The evaporative fraction as a measure of surface energy partitioning

    Energy Technology Data Exchange (ETDEWEB)

    Nichols, W.E. [Pacific Northwest Lab., Richland, WA (United States); Cuenca, R.H. [Oregon State Univ., Corvallis, OR (United States)

    1990-12-31

    The evaporative fraction is a ratio that expresses the proportion of turbulent flux energy over land surfaces devoted to evaporation and transpiration (evapotranspiration). It has been used to characterize the energy partition over land surfaces and has potential for inferring daily energy balance information based on mid-day remote sensing measurements. The HAPEX-MOBILHY program`s SAMER system provided surface energy balance data over a range of agricultural crops and soil types. The databases from this large-scale field experiment was analyzed for the purpose of studying the behavior and daylight stability of the evaporative fraction in both ideal and general meteorological conditions. Strong linear relations were found to exist between the mid-day evaporative fraction and the daylight mean evaporative fraction. Statistical tests however rejected the hypothesis that the two quantities were equal. The relations between the evaporative fraction and the surface soil moisture as well as soil moisture in the complete vegetation root zone were also explored.

  17. The evaporative fraction as a measure of surface energy partitioning

    Energy Technology Data Exchange (ETDEWEB)

    Nichols, W.E. (Pacific Northwest Lab., Richland, WA (United States)); Cuenca, R.H. (Oregon State Univ., Corvallis, OR (United States))

    1990-01-01

    The evaporative fraction is a ratio that expresses the proportion of turbulent flux energy over land surfaces devoted to evaporation and transpiration (evapotranspiration). It has been used to characterize the energy partition over land surfaces and has potential for inferring daily energy balance information based on mid-day remote sensing measurements. The HAPEX-MOBILHY program's SAMER system provided surface energy balance data over a range of agricultural crops and soil types. The databases from this large-scale field experiment was analyzed for the purpose of studying the behavior and daylight stability of the evaporative fraction in both ideal and general meteorological conditions. Strong linear relations were found to exist between the mid-day evaporative fraction and the daylight mean evaporative fraction. Statistical tests however rejected the hypothesis that the two quantities were equal. The relations between the evaporative fraction and the surface soil moisture as well as soil moisture in the complete vegetation root zone were also explored.

  18. ILC beam energy measurement by means of laser Compton backscattering

    Energy Technology Data Exchange (ETDEWEB)

    Muchnoi, N. [Budker Inst. for Nuclear Physics, Novosibirsk (Russian Federation); Schreiber, H.J.; Viti, M. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany)

    2008-10-15

    A novel, non-invasive method of measuring the beam energy at the International Linear Collider is proposed. Laser light collides head-on with beam particles and either the energy of the Compton scattered electrons near the kinematic end-point is measured or the positions of the Compton backscattered {gamma}-rays, the edge electrons and the unscattered beam particles are recorded. A compact layout for the Compton spectrometer is suggested. It consists of a bending magnet and position sensitive detectors operating in a large radiation environment. Several options for high spatial resolution detectors are discussed. Simulation studies support the use of an infrared or green laser and quartz fiber detectors to monitor the backscattered photons and edge electrons. Employing a cavity monitor, the beam particle position downstream of the magnet can be recorded with submicrometer precision. Such a scheme provides a feasible and promising method to access the incident beam energy with precisions of 10{sup -4} or better on a bunch-to-bunch basis while the electron and positron beams are in collision. (orig.)

  19. Measurement of Exciton Binding Energy of Monolayer WS2

    Science.gov (United States)

    Chen, Xi; Zhu, Bairen; Cui, Xiaodong

    Excitonic effects are prominent in monolayer crystal of transition metal dichalcogenides (TMDCs) because of spatial confinement and reduced Coulomb screening. Here we use linear differential transmission spectroscopy and two-photon photoluminescence excitation spectroscopy (TP-PLE) to measure the exciton binding energy of monolayer WS2. Peaks for excitonic absorptions of the direct gap located at K valley of the Brillouin zone and transitions from multiple points near Γ point of the Brillouin zone, as well as trion side band are shown in the linear absorption spectra of WS2. But there is no gap between distinct excitons and the continuum of the interband transitions. Strong electron-phonon scattering, overlap of excitons around Γ point and the transfer of the oscillator strength from interband continuum to exciton states make it difficult to resolve the electronic interband transition edge even down to 10K. The gap between excited states of the band-edge exciton and the single-particle band is probed by TP-PLE measurements. And the energy difference between 1s exciton and the single-particle gap gives the exciton binding energy of monolayer WS2 to be about 0.71eV. The work is supported by Area of excellency (AoE/P-04/08), CRF of Hong Kong Research Grant Council (HKU9/CRF/13G) and SRT on New Materials of The University of Hong Kong.

  20. Measurement of solar energy radiation in Abu Dhabi, UAE

    International Nuclear Information System (INIS)

    Islam, M.D.; Kubo, I.; Ohadi, M.; Alili, A.A.

    2009-01-01

    This paper presents data on measurement of actual solar radiation in Abu Dhabi (24.43 deg. N, 54.45 deg. E). Global solar radiation and surface temperatures were measured and analyzed for one complete year. High resolution, real-time solar radiation and other meteorological data were collected and processed. Daily and monthly average solar radiation values were calculated from the one-minute average recorded values. The highest daily and monthly mean solar radiation values were 369 and 290 W/m 2 , respectively. The highest one-minute average daily solar radiation was 1041 W/m 2 . Yearly average daily energy input was 18.48 MJ/m 2 /day. Besides the global solar radiation, the daily and monthly average clearness indexes along with temperature variations are discussed. When possible, global solar energy radiation and some meteorological data are compared with corresponding data in other Arab state capitals. The data collected indicate that Abu Dhabi has a strong potential for solar energy capture

  1. Directed energy deflection laboratory measurements of common space based targets

    Science.gov (United States)

    Brashears, Travis; Lubin, Philip; Hughes, Gary B.; Meinhold, Peter; Batliner, Payton; Motta, Caio; Madajian, Jonathan; Mercer, Whitaker; Knowles, Patrick

    2016-09-01

    We report on laboratory studies of the effectiveness of directed energy planetary defense as a part of the DE-STAR (Directed Energy System for Targeting of Asteroids and exploRation) program. DE-STAR and DE-STARLITE are directed energy "stand-off" and "stand-on" programs, respectively. These systems consist of a modular array of kilowatt-class lasers powered by photovoltaics, and are capable of heating a spot on the surface of an asteroid to the point of vaporization. Mass ejection, as a plume of evaporated material, creates a reactionary thrust capable of diverting the asteroid's orbit. In a series of papers, we have developed a theoretical basis and described numerical simulations for determining the thrust produced by material evaporating from the surface of an asteroid. In the DESTAR concept, the asteroid itself is used as the deflection "propellant". This study presents results of experiments designed to measure the thrust created by evaporation from a laser directed energy spot. We constructed a vacuum chamber to simulate space conditions, and installed a torsion balance that holds a common space target sample. The sample is illuminated with a fiber array laser with flux levels up to 60 MW/m2 , which allows us to simulate a mission level flux but on a small scale. We use a separate laser as well as a position sensitive centroid detector to readout the angular motion of the torsion balance and can thus determine the thrust. We compare the measured thrust to the models. Our theoretical models indicate a coupling coefficient well in excess of 100 μN/Woptical, though we assume a more conservative value of 80 μN/Woptical and then degrade this with an optical "encircled energy" efficiency of 0.75 to 60 μN/Woptical in our deflection modeling. Our measurements discussed here yield about 45 μN/Wabsorbed as a reasonable lower limit to the thrust per optical watt absorbed. Results vary depending on the material tested and are limited to measurements of 1 axis, so

  2. High resolution climatological wind measurements for wind energy applications

    Energy Technology Data Exchange (ETDEWEB)

    Bergstroem, H. [Uppsala Univ. (Sweden). Dept. of Meteorology

    1996-12-01

    Measurements with a combined cup anemometer/wind vane instrument, developed at the Department of Meteorology in Uppsala, is presented. The instrument has a frequency response of about 1 Hz, making it suitable not only for mean wind measurements, but also for studies of atmospheric turbulence. It is robust enough to be used for climatological purposes. Comparisons with data from a hot-film anemometer show good agreement, both as regards standard deviations and the spectral decomposition of the turbulent wind signal. The cup anemometer/wind vane instrument is currently used at three sites within the Swedish wind energy research programme. These measurements are shortly described, and a few examples of the results are given. 1 ref, 10 figs

  3. Linac4 Low Energy Beam Measurements with Negative Hydrogen

    CERN Document Server

    Scrivens, R; Crettiez, O; Dimov, V; Gerard, D; Granemann Souza, E; Guida, R; Hansen, J; Lallement, J B; Lettry, J; Lombardi, A; Midttun, O; Pasquino, C; Raich, U; Riffaud, B; Roncarolo, F; Valerio-Lizarraga, C A; Wallner, J; Yarmohammadi Satri, M; Zickler, T

    2014-01-01

    Linac4, a 160 MeV normal-conducting H- linear accelerator, is the first step in the upgrade of the beam intensity available from the LHC proton injectors at CERN. The Linac4 Low Energy Beam Transport (LEBT) line from the pulsed 2 MHz RF driven ion source, to the 352 MHz RFQ has been built and installed at a test stand, and has been used to transport and match to the RFQ a pulsed 14 mA H- beam at 45 keV. A temporary slit-and-grid emittance measurement system has been put in place to characterize the beam delivered to the RFQ. In this paper a description of the LEBT and its beam diagnostics is given, and the results of beam emittance measurements and beam transmission measurements through the RFQ are compared with the expectation from simulations.

  4. Energy-loss measurement with the ZEUS Central Tracking Detector

    Energy Technology Data Exchange (ETDEWEB)

    Bartsch, D.

    2007-05-15

    The measurement of the specific energy loss due to ionisation, dE/dx, in a drift chamber is a very important tool for particle identification in final states of reactions between high energetic particles. Such identification requires a well understood dE/dx measurement including a precise knowledge of its uncertainties. Exploiting for the first time the full set of ZEUS data from the HERA operation between 1996 and 2005 twelve detector-related influences affecting the dE/dx measurement of the ZEUS Central Tracking Detector have been identified, separately studied and parameterised. A sophisticated iterative procedure has been developed to correct for these twelve effects, which takes into account the correlations between them. A universal parameterisation of the detector-specific Bethe-Bloch curve valid for all particle species has been extracted. In addition, the various contributions to the measurement uncertainty have been disentangled and determined. This yields the best achievable prediction for the single-track dE/dx resolution. For both the analysis of the measured data and the simulation of detector performance, the detailed understanding of the measurement and resolution of dE/dx gained in this work provides a tool with optimum power for particle identification in a physics studies. (orig.)

  5. Measuring surface energy and evapotranspiration across Caribbean mangrove forests

    Science.gov (United States)

    Lagomasino, D.; Fatoyinbo, T. E.; Price, R.

    2014-12-01

    Coastal mangroves lose large amounts of water through evapotranspiration (ET) that can be equivalent to the amount of annual rainfall in certain years. Satellite remote sensing has been used to estimate surface energy and ET variability in many forested ecosystems, yet has been widely overlooked in mangrove forests. Using a combination of long-term datasets (30-year) acquired from the NASA Landsat 5 and 7 satellite databases, the present study investigated ET and surface energy balance variability between two mangrove forest sites in the Caribbean: 1) Everglades National Park (ENP; Florida, USA) and 2) Sian Ka'an Biosphere Reserve (SKBR; Quintana Roo, Mexico). A satellite-derived surface energy balance model was used to estimate ET in tall and scrub mangroves environments at ENP and SKBR. Results identified significant differences in soil heat flux measurements and ET between the tall and scrub mangrove environments. Scrub mangroves exhibited the highest soil heat flux coincident with the lowest biophysical indices (i.e., Fractional Vegetation Cover, Normalized Difference Vegetation Index, and Soil-Adjusted Vegetation Index) and ET rates. Mangrove damage and mortality was observed on the satellite images following strong tropical storms and associated with anthropogenic modifications and resulted in low values in spectral vegetation indices, higher soil heat flux, and higher ET. Recovery of the spectral characteristics, soil heat flux and ET was within 1-2 years following hurricane disturbance while, degradation caused by human disturbance persisted for many years. Remotely sensed ET of mangrove forests can provide estimates over a few decades and provide us with some understanding of how these environments respond to disturbances to the landscape in periods where no ground data exists or in locations that are difficult to access. Moreover, relationships between energy and water balance components developed for the coastal mangroves of Florida and Mexico could be

  6. Potential environmental effects of energy conservation measures in northwest industries

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, M C; Gygi, K F; Hendrickson, P L

    1992-01-01

    The Bonneville Power Administration (Bonneville) has identified 101 plants in the Pacific Northwest that account for 80% of the region's industrial electricity consumption. These plants offer a precise target for a conservation program. PNL determined that most of these 101 plants were represented by 11 major industries. We then reviewed 36 major conservation technologies used in these 11 industrial settings to determine their potential environmental impacts. Energy efficiency technologies designed for industrial use may result in direct or indirect environmental impacts. Effects may result from the production of the conservation measure technology, changes in the working environment due to different energy and material requirements, or changes to waste streams. Industry type, work-place conditions, worker training, and environmental conditions inside and outside the plant are all key variables that may affect environmental outcomes. To address these issues this report has three objectives: Describe potential conservation measures that Bonneville may employ in industrial programs and discuss potential primary impacts. Characterize industrial systems and processes where the measure may be employed and describe general environmental issues associated with each industry type. Review environmental permitting, licensing, and other regulatory actions required for industries and summarize the type of information available from these sources for further analysis.

  7. Directed Energy Deflection Laboratory Measurements of Asteroids and Space Debris

    Science.gov (United States)

    Brashears, T.; Lubin, P. M.

    2016-12-01

    We report on laboratory studies of the effectiveness of directed energy planetary and space defense as a part of the DE-STAR (Directed Energy System for Targeting of Asteroids and exploRation) program. DE-STAR [1][5][6] and DE-STARLITE [2][5][6] are directed energy "stand-off" and "stand-on" programs, respectively. These systems consist of a modular array of kilowatt-class lasers powered by photovoltaics, and are capable of heating a spot on the surface of an asteroid to the point of vaporization. Mass ejection, as a plume of evaporated material, creates a reactionary thrust capable of diverting the asteroid's orbit. In a series of papers, we have developed a theoretical basis and described numerical simulations for determining the thrust produced by material evaporating from the surface of an asteroid [1][2][3][4][5][6]. In the DE-STAR concept, the asteroid itself is used as the deflection "propellant". This study presents results of experiments designed to measure the thrust created by evaporation from a laser directed energy spot. We constructed a vacuum chamber to simulate space conditions, and installed a torsion balance that holds an "asteroid" or a space debris sample. The sample is illuminated with a fiber array laser with flux levels up to 60 MW/m2 which allows us to simulate a mission level flux but on a small scale. We use a separate laser as well as a position sensitive centroid detector to readout the angular motion of the torsion balance and can thus determine the thrust. We compare the measured thrust to the models. Our theoretical models indicate a coupling coefficient well in excess of 100 µN/Woptical, though we assume a more conservative value of 80 µN/Woptical and then degrade this with an optical "encircled energy" efficiency of 0.75 to 60 µN/Woptical in our deflection modeling. Our measurements discussed here yield about 60 µN/Wabsorbed as a reasonable lower limit to the thrust per optical watt absorbed.

  8. Green tax reforms and habits

    Energy Technology Data Exchange (ETDEWEB)

    Miguel, Carlos de; Manzano, Baltasar [Universidad de Vigo and Rede, Lagoas-Marcosende, s/n, 36200 Vigo (Spain)

    2011-01-15

    Using a dynamic general equilibrium model, we explore the role of habit formation when analyzing green tax reforms under the double dividend hypothesis. We assume increases in energy taxes and adjust capital taxation in a revenue-neutral framework to evaluate the effects on welfare. Since the existence of an environmental dividend is uncontroversial, we mainly focus on the efficiency dividend. Our findings show that, when taxes on household energy consumption increase, habits and transitional dynamics alter household decisions, and change the efficiency dividend. However, when the tax increase is on energy used as an input, reform always induces a welfare cost in terms of efficiency. In this case, habits play a less important role. (author)

  9. Reforming technology for syngas production

    International Nuclear Information System (INIS)

    Epstein, M.

    1997-01-01

    Methane forming reactions using either steam or CO 2 have been known to industry for a long time. These endothermic reactions require the investment of a relatively large amount of energy. German researchers, in the 1970's, conceived and developed the idea to use this reaction and the reverse methanation reaction in a closed loop for the transportation and distribution of nuclear heat. The idea was also adopted for use with solar energy as a heat source. Utilizing solar energy as the heat source, the Weismann Institute of Science has fabricated, installed and operated a complete loop capable of the conversion and transportation of over 400 kW of heat. This system can be operated with a wide range of CO 2 /H 2 O/CH 4 feed mixtures. Steam reforming is the common reforming reaction in the ''open loop'' mode for the purpose of synthesis gas production. This is accomplished with a large excess of steam on a nickel catalyst. However, it has only recently been recognized that there is also a substantial market for CO 2 reforming. The CO 2 /CH 4 mixture in various proportions exists in many places and has, so far, not been used efficiently. The sources for this mixture are biogas produced in anaerobic digestion processes and gas resources such as the NATUNA gas field in Indonesia, and many others. Therefore, the system of CO 2 /CH 4 deserves more attention. Commercial catalysts used for steam reforming based on nickel are not suitable for this system. Therefore, other catalysts based on Rhodium and Ruthenium have been developed and some performance data is presented in this paper. Also presented is a conceptual schematic layout of a CO 2 reforming plant and matching methanator. A computer code for a detailed design of the entire loop in a commercial size system has been prepared where optimized operational conditions as well as equipment parameters can be determined. (author). 3 figs, 3 tabs

  10. H{sub 2} as source of renewable energy: production through catalytic methods by means of the reforming of methanol; H{sub 2} como fuente de energia renovable: produccion por metodos cataliticos mediante el reformado de metanol

    Energy Technology Data Exchange (ETDEWEB)

    Perez H, R.; Lopez, P.; Gutierrez M, A.; Gutierrez W, C.; Mondragon G, G.; Mendoza A, D. [ININ, Departamento de Tecnologia de Materiales, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Angeles Ch, C. [Instituto Mexicano del Petroleo, Programa de Ingenieria Molecular, Eje Central Lazaro Cardenas Norte 152, Col. San Bartolo Atepehuacan, 07730 Mexico D. F. (Mexico); Arenas A, J., E-mail: raul.perez@inin.gob.m [UNAM, Instituto de Fisica, Ciudad Universitaria, 04510 Mexico D. F. (Mexico)

    2010-07-01

    The fuel cells transform the chemical energy stored in the connection H-H of the H{sub 2} molecule in electric energy and water vapor when is combines with the oxygen. Even when the hydrogen has a high potential as energy source, its handling is difficult (storage and transport). This has motivated the search of hydrogen production methods in situ starting from liquid fuels like the methanol or ethanol through the reaction of reforming. The methanol is a fuel of easy availability for fuel cells with electronic applications and of transport. Although the methanol energy density is approximately half of the gasoline and diesel, it is more reagent and can be used directly in fuel cells or can also be reformed to low temperatures for the hydrogen obtaining to be used in fuel cells of proton exchange. In this article the results obtained of the systems, Cu-Ni/ZrO{sub 2} and Ag-Au(1-D)-CeO{sub 2} are presented and can be competitive to generate H{sub 2} and being used in the fuel cells to generate energy. (Author)

  11. Energy Approach to Measure the Region’s Assimilative Capacity

    Directory of Open Access Journals (Sweden)

    Irina Stepanovna Belik

    2017-12-01

    Full Text Available One of the important problems of the environmental economics is the development of methodology for quantifying the assimilative capacity (AC of a territory. The article analyzes the existing approaches to determining and assessing the AC of a territory. We justify the advantages of using the energy approach. The authors’ method consists in using the maximum permissible energy load (MPEL for quantitative assessment of the AC of a territory. MPEL is a value that the ecological and economic system can withstand for a long time without changing its properties. We determine MPEL on the basis of data on the ability of various categories of land to absorb greenhouse gases (GHG, as well as the specific GHG emissions per ton of conventional fuel. Further, we compare the calculated value of MPEL in fuel equivalents with the actual consumption of fuel resources for the needs of the national economy. These values ratio can serve as a standard for measuring and balancing the environmental and economic system. The authors have validated the described method on the example of the Sverdlovsk region, which is characterized by a high level of man’s impact. Calculations show that the actual consumption of fossil fuels in the region exceeds MPEL. That indicates an imbalance in the ecological and economic system and may lead to further deterioration of the environmental quality in the region. The proposed methodological approach and calculations can be used when developing strategic planning documents for a territory, including its energy strategy

  12. Using Energy Peaks to Measure New Particle Masses

    CERN Document Server

    Agashe, Kaustubh; Kim, Doojin

    2014-01-01

    We discussed in arXiv:1209.0772 that the laboratory frame distribution of the energy of a massless particle from a two-body decay at a hadron collider has a peak whose location is identical to the value of this daughter's (fixed) energy in the rest frame of the corresponding mother particle. For that result to hold we assumed that the mother is unpolarized and has a generic boost distribution in the laboratory frame. In this work we discuss how this observation can be applied for determination of masses of new particles, without requiring a full reconstruction of their decay chains or information about the rest of the event. We focus on a two-step cascade decay of a massive particle that has one invisible particle in the final state: C -> Bb -> Aab, where C, B and A are new particles of which A is invisible and a, b are visible particles. Combining the measurements of the peaks of energy distributions of a and b with that of the edge in their invariant mass distribution, we demonstrate that it is in principle...

  13. The Global Energy Balance Archive (GEBA) version 2017: a database for worldwide measured surface energy fluxes

    Science.gov (United States)

    Wild, Martin; Ohmura, Atsumu; Schär, Christoph; Müller, Guido; Folini, Doris; Schwarz, Matthias; Zyta Hakuba, Maria; Sanchez-Lorenzo, Arturo

    2017-08-01

    The Global Energy Balance Archive (GEBA) is a database for the central storage of the worldwide measured energy fluxes at the Earth's surface, maintained at ETH Zurich (Switzerland). This paper documents the status of the GEBA version 2017 dataset, presents the new web interface and user access, and reviews the scientific impact that GEBA data had in various applications. GEBA has continuously been expanded and updated and contains in its 2017 version around 500 000 monthly mean entries of various surface energy balance components measured at 2500 locations. The database contains observations from 15 surface energy flux components, with the most widely measured quantity available in GEBA being the shortwave radiation incident at the Earth's surface (global radiation). Many of the historic records extend over several decades. GEBA contains monthly data from a variety of sources, namely from the World Radiation Data Centre (WRDC) in St. Petersburg, from national weather services, from different research networks (BSRN, ARM, SURFRAD), from peer-reviewed publications, project and data reports, and from personal communications. Quality checks are applied to test for gross errors in the dataset. GEBA has played a key role in various research applications, such as in the quantification of the global energy balance, in the discussion of the anomalous atmospheric shortwave absorption, and in the detection of multi-decadal variations in global radiation, known as global dimming and brightening. GEBA is further extensively used for the evaluation of climate models and satellite-derived surface flux products. On a more applied level, GEBA provides the basis for engineering applications in the context of solar power generation, water management, agricultural production and tourism. GEBA is publicly accessible through the internet via http://www.geba.ethz.ch. Supplementary data are available at https://doi.org/10.1594/PANGAEA.873078.

  14. Measuring the electron beam energy in a magnetic bunch compressor

    Energy Technology Data Exchange (ETDEWEB)

    Hacker, Kirsten

    2010-09-15

    Within this thesis, work was carried out in and around the first bunch compressor chicane of the FLASH (Free-electron LASer in Hamburg) linear accelerator in which two distinct systems were developed for the measurement of an electron beams' position with sub-5 {mu}m precision over a 10 cm range. One of these two systems utilized RF techniques to measure the difference between the arrival-times of two broadband electrical pulses generated by the passage of the electron beam adjacent to a pickup antenna. The other system measured the arrival-times of the pulses from the pickup with an optical technique dependent on the delivery of laser pulses which are synchronized to the RF reference of the machine. The relative advantages and disadvantages of these two techniques are explored and compared to other available approaches to measure the same beam property, including a time-of-flight measurement with two beam arrival-time monitors and a synchrotron light monitor with two photomultiplier tubes. The electron beam position measurement is required as part of a measurement of the electron beam energy and could be used in an intra-bunch-train beam-based feedback system that would stabilize the amplitude of the accelerating field. By stabilizing the accelerating field amplitude, the arrival-time of the electron beam can be made more stable. By stabilizing the electron beam arrival-time relative to a stable reference, diagnostic, seeding, and beam-manipulation lasers can be synchronized to the beam. (orig.)

  15. The Global Energy Balance Archive (GEBA): A database for the worldwide measured surface energy fluxes

    Science.gov (United States)

    Wild, Martin; Ohmura, Atsumu; Schär, Christoph; Müller, Guido; Hakuba, Maria Z.; Mystakidis, Stefanos; Arsenovic, Pavle; Sanchez-Lorenzo, Arturo

    2017-02-01

    The Global Energy Balance Archive (GEBA) is a database for the worldwide measured energy fluxes at the Earth's surface. GEBA is maintained at ETH Zurich (Switzerland) and has been founded in the 1980s by Prof. Atsumu Ohmura. It has continuously been updated and currently contains around 2500 stations with 500`000 monthly mean entries of various surface energy balance components. Many of the records extend over several decades. The most widely measured quantity available in GEBA is the solar radiation incident at the Earth's surface ("global radiation"). The data sources include, in addition to the World Radiation Data Centre (WRDC) in St. Petersburg, data reports from National Weather Services, data from different research networks (BSRN, ARM, SURFRAD), data published in peer-reviewed publications and data obtained through personal communications. Different quality checks are applied to check for gross errors in the dataset. GEBA is used in various research applications, such as for the quantification of the global energy balance and its spatiotemporal variation, or for the estimation of long-term trends in the surface fluxes, which enabled the detection of multi-decadal variations in surface solar radiation, known as "global dimming" and "brightening". GEBA is further extensively used for the evaluation of climate models and satellite-derived surface flux products. On a more applied level, GEBA provides the basis for engineering applications in the context of solar power generation, water management, agricultural production and tourism. GEBA is publicly accessible over the internet via www.geba.ethz.ch.

  16. A Decade of Reform

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ongoing waves of enterprise-management reforms,. – Broader economic and social reforms pertaining to the environment in which the enterprises operate;. – Ambitious efforts to upgrade the technology of enterprises through the procurement (often from abroad) of advanced production technology; and. – S&T reforms ...

  17. Proton Linear Energy Transfer measurement using Emulsion Cloud Chamber

    Science.gov (United States)

    Shin, Jae-ik; Park, Seyjoon; Kim, Haksoo; Kim, Meyoung; Jeong, Chiyoung; Cho, Sungkoo; Lim, Young Kyung; Shin, Dongho; Lee, Se Byeong; Morishima, Kunihiro; Naganawa, Naotaka; Sato, Osamu; Kwak, Jungwon; Kim, Sung Hyun; Cho, Jung Sook; Ahn, Jung Keun; Kim, Ji Hyun; Yoon, Chun Sil; Incerti, Sebastien

    2015-04-01

    This study proposes to determine the correlation between the Volume Pulse Height (VPH) measured by nuclear emulsion and Linear Energy Transfer (LET) calculated by Monte Carlo simulation based on Geant4. The nuclear emulsion was irradiated at the National Cancer Center (NCC) with a therapeutic proton beam and was installed at 5.2 m distance from the beam nozzle structure with various thicknesses of water-equivalent material (PMMA) blocks to position with specific positions along the Bragg curve. After the beam exposure and development of the emulsion films, the films were scanned by S-UTS developed in Nagoya University. The proton tracks in the scanned films were reconstructed using the 'NETSCAN' method. Through this procedure, the VPH can be derived from each reconstructed proton track at each position along the Bragg curve. The VPH value indicates the magnitude of energy loss in proton track. By comparison with the simulation results obtained using Geant4, we found the correlation between the LET calculated by Monte Carlo simulation and the VPH measured by the nuclear emulsion.

  18. Proton Linear Energy Transfer measurement using Emulsion Cloud Chamber

    International Nuclear Information System (INIS)

    Shin, Jae-ik; Park, Seyjoon; Kim, Haksoo; Kim, Meyoung; Jeong, Chiyoung; Cho, Sungkoo; Lim, Young Kyung; Shin, Dongho; Lee, Se Byeong; Morishima, Kunihiro; Naganawa, Naotaka; Sato, Osamu; Kwak, Jungwon; Kim, Sung Hyun; Cho, Jung Sook; Ahn, Jung Keun; Kim, Ji Hyun; Yoon, Chun Sil; Incerti, Sebastien

    2015-01-01

    This study proposes to determine the correlation between the Volume Pulse Height (VPH) measured by nuclear emulsion and Linear Energy Transfer (LET) calculated by Monte Carlo simulation based on Geant4. The nuclear emulsion was irradiated at the National Cancer Center (NCC) with a therapeutic proton beam and was installed at 5.2 m distance from the beam nozzle structure with various thicknesses of water-equivalent material (PMMA) blocks to position with specific positions along the Bragg curve. After the beam exposure and development of the emulsion films, the films were scanned by S-UTS developed in Nagoya University. The proton tracks in the scanned films were reconstructed using the ‘NETSCAN’ method. Through this procedure, the VPH can be derived from each reconstructed proton track at each position along the Bragg curve. The VPH value indicates the magnitude of energy loss in proton track. By comparison with the simulation results obtained using Geant4, we found the correlation between the LET calculated by Monte Carlo simulation and the VPH measured by the nuclear emulsion

  19. Proton Linear Energy Transfer measurement using Emulsion Cloud Chamber

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jae-ik [Proton Therapy Center, National Cancer Center (Korea, Republic of); Division of Heavy Ion Clinical Research, Korea Institute of Radiological & Medical Sciences (KIRAMS), Seoul (Korea, Republic of); Park, Seyjoon [Department of Radiation Oncology, Samsung Medical Center, Sungkyunkwan University, School of Medicine, Seoul (Korea, Republic of); Kim, Haksoo; Kim, Meyoung [Proton Therapy Center, National Cancer Center (Korea, Republic of); Jeong, Chiyoung [Department of Radiation Oncology, Asan Medical Center, University of Ulsan College of Medicine, Seoul (Korea, Republic of); Cho, Sungkoo [Department of Radiation Oncology, Samsung Medical Center, Sungkyunkwan University, School of Medicine, Seoul (Korea, Republic of); Lim, Young Kyung; Shin, Dongho [Proton Therapy Center, National Cancer Center (Korea, Republic of); Lee, Se Byeong, E-mail: sblee@ncc.re.kr [Proton Therapy Center, National Cancer Center (Korea, Republic of); Morishima, Kunihiro; Naganawa, Naotaka; Sato, Osamu [Department of Physics, Nagoya University, Nagoya (Japan); Kwak, Jungwon [Department of Radiation Oncology, Asan Medical Center, University of Ulsan College of Medicine, Seoul (Korea, Republic of); Kim, Sung Hyun [Center for Underground Physics, Institute for Basic Science (IBS), Daejeon (Korea, Republic of); Cho, Jung Sook [Department of refinement education, Dongseo University, Busan (Korea, Republic of); Ahn, Jung Keun [Department of Physics, Korea University, Seoul (Korea, Republic of); Kim, Ji Hyun; Yoon, Chun Sil [Gyeongsang National University, Jinju (Korea, Republic of); Incerti, Sebastien [CNRS, IN2P3, CENBG, UMR 5797, F-33170 Gradignan (France); Université Bordeaux 1, CENBG, UMR 5797, F-33170 Gradignan (France)

    2015-04-15

    This study proposes to determine the correlation between the Volume Pulse Height (VPH) measured by nuclear emulsion and Linear Energy Transfer (LET) calculated by Monte Carlo simulation based on Geant4. The nuclear emulsion was irradiated at the National Cancer Center (NCC) with a therapeutic proton beam and was installed at 5.2 m distance from the beam nozzle structure with various thicknesses of water-equivalent material (PMMA) blocks to position with specific positions along the Bragg curve. After the beam exposure and development of the emulsion films, the films were scanned by S-UTS developed in Nagoya University. The proton tracks in the scanned films were reconstructed using the ‘NETSCAN’ method. Through this procedure, the VPH can be derived from each reconstructed proton track at each position along the Bragg curve. The VPH value indicates the magnitude of energy loss in proton track. By comparison with the simulation results obtained using Geant4, we found the correlation between the LET calculated by Monte Carlo simulation and the VPH measured by the nuclear emulsion.

  20. Measure Guideline. Deep Energy Enclosure Retrofit for Zero Energy Ready House Flat Roofs

    Energy Technology Data Exchange (ETDEWEB)

    Loomis, H. [Building Science Corporation, Westford, MA (United States); Pettit, B. [Building Science Corporation, Westford, MA (United States)

    2015-05-29

    This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly. It describes the strategies and procedures for an exterior retrofit of a flat wood-framed roof with brick masonry exterior walls using exterior and interior (framing cavity) insulation. The approach supported in this guide could also be adapted for use with flat wood-framed roofs with wood-framed exterior walls.

  1. Measure Guideline: Deep Energy Enclosure Retrofit for Zero Energy Ready House Flat Roofs

    Energy Technology Data Exchange (ETDEWEB)

    Loomis, H. [Building Science Corporation, Westford, MA (United States); Pettit, B. [Building Science Corporation, Westford, MA (United States)

    2015-05-01

    This Measure Guideline provides design and construction information for a deep energy enclosure retrofit (DEER) solution of a flat roof assembly. It describes the strategies and procedures for an exterior retrofit of a flat, wood-framed roof with brick masonry exterior walls, using exterior and interior (framing cavity) insulation. The approach supported in this guide could also be adapted for use with flat, wood-framed roofs with wood-framed exterior walls.

  2. Energy

    International Nuclear Information System (INIS)

    Meister, F.; Ott, F.

    2002-01-01

    This chapter gives an overview of the current energy economy in Austria. The Austrian political aims of sustainable development and climate protection imply a reorientation of the Austrian energy policy as a whole. Energy consumption trends (1993-1998), final energy consumption by energy carrier (indexed data 1993-1999), comparative analysis of useful energy demand (1993 and 1999) and final energy consumption of renewable energy sources by sector (1996-1999) in Austria are given. The necessary measures to be taken in order to reduce the energy demand and increased the use of renewable energy are briefly mentioned. Figs. 5. (nevyjel)

  3. Pore size determination from charged particle energy loss measurement

    International Nuclear Information System (INIS)

    Brady, F.P.; Armitage, B.H.

    1977-01-01

    A new method aimed at measuring porosity and mean pore size in materials has been developed at Harwell. The energy width or variance of a transmitted or backscattered charged particle beam is measured and related to the mean pore size via the assumption that the variance in total path length in the porous material is given by (Δx 2 )=na 2 , where n is the mean number of pores and a the mean pore size. It is shown on the basis of a general and rigorous theory of total path length distribution that this approximation can give rise to large errors in the mean pore size determination particularly in the case of large porosities (epsilon>0.5). In practice it is found that it is not easy to utilize fully the general theory because accurate measurements of the first four moments are required to determine the means and variances of the pore and inter-pore length distributions. Several models for these distributions are proposed. When these are incorporated in the general theory the determinations of mean pore size from experimental measurements on powder samples are in good agreement with values determined by other methods. (Auth.)

  4. Marginal costs for intensified energy-efficiency measures; Grenzkosten bei forcierten Energie-Effizienzmassnahmen

    Energy Technology Data Exchange (ETDEWEB)

    Jakob, J.; Jochem, E.; Christen, K.

    2002-07-01

    The costs and benefits of investments in measures designed to improve the energy efficiency of residential buildings (in particular investments in heat insulation) were calculated as a function of increasing energy efficiency for new and renovated buildings and for single-family homes and apartment buildings. These investments in measures to improve efficiency mostly involve with the building envelope and ventilation systems and aim to successively reduce the space-heating needs of the buildings. The measures range from present-day building and renovation methods through to the 'Minergie' and 'Passive House' ('Minergie-P' in Switzerland) standards for low and very-low energy consumption buildings. Cost-benefit ratios were determined for individual building components, individual building concepts and for the whole of Switzerland, using both the average-cost as well as the pure marginal-cost methods (energy-economics level). The collection of empirical data (especially on costs) was an integral and important part of the project. The marginal costs were then compared with the benefits arising from the costs for space heating that were avoided, and, using a few typical cases as examples, with the so-called co-benefits, which are to be implemented in part by private persons and companies. For their quantification, methods were developed and used in case studies; in addition, avoided external costs are also considered. The marginal costs were also calculated for periods of time in the future, whereby they were made dynamic, according to their share of innovation, using the learning-curve method (learning and scaling effects). As far as the findings are concerned, there can be no doubt that the potential to be opened up for increasing energy efficiency using heat insulation measures is high, both for renovations and new construction work. A large portion of this potential is already economically viable and even more so when the possible

  5. Research and practice of the reformation of the mass-spectrometer MAT-250 UF's auto-measure system improvement

    International Nuclear Information System (INIS)

    Hao Xueyuan; Kang Jianyou; Xie Zhuangying

    1999-03-01

    By analyzing and studying the hardware and software of the mass-spectrometer MAT-250UF's original automatic measuring system, the original system is replaced with a new system consisting of the IEEE-488 interface, a modern PC serial microcomputer and the analyzing software programmed by the author. The original system repairing and direct replacing difficulties are resolved. The new system is adaptable to the practical application in routine analytical job and study, and to modern analysis standard verified by standard sample, the new system operates perfectly

  6. Defining energy vulnerability in mobility. Measuring energy vulnerability in mobility. Acting against energy vulnerability in mobility. Discussing energy vulnerability in mobility. Task no. 4

    International Nuclear Information System (INIS)

    Jouffe, Yves; Massot, Marie-Helene; Noble, Cyprien

    2015-01-01

    Extensive expansion of urban areas generates transportation needs and energy expenses for mobility. Households already impacted by fuel poverty also suffer from energy vulnerability in their mobility. This report was prepared in the framework of the study of fuel poverty in France in the light of several indicators from existing inquiries, databases and modeling tools. The report is organised in 4 parts dealing with: the definition of energy vulnerability in mobility, its measurement, the possible remedial actions, and the discussions about energy vulnerability in mobility through working group meetings, respectively

  7. Surface energy balance measurements in the Mexico City: a review

    Energy Technology Data Exchange (ETDEWEB)

    Tejeda Martinez, A. [Universidad Veracruzana, Xalapa, Veracruz (Mexico); Jauregui Ostos, E. [Centro de Ciencias de la Atmosfera, Universidad Nacional Autonoma de Mexico, UNAM, Mexico, D.F. (Mexico)

    2005-01-01

    During the last decade of the 20th Century, diverse campaigns for measuring the atmospheric energy balance were performed in downtown Mexico City (School of Mines and Preparatory School No. 7), in the southern suburbs (University Reserve) and in the surrounding rural areas (Plan Texcoco), in addition to a campaign carried out in 1985 in the Tacubaya district, a suburban western peripheral site. The objective was to obtain data for a better understanding of the climatic alterations due to urbanization, particularly to describe the role that the modification of the natural ground cover has played as a result of paving and the construction of urban canyons. In this paper, a review of these campaigns is presented. Energy partitioning in some areas (Tacubaya and Preparatory School No.7) is similar to that observed in urban centers of middle latitudes, whereas the major contrast was observed between Texcoco, with maximum energy consumption through evaporation, and School of Mines, where the latent heat is as low as in a desert. From the values of the correlations among the different components of energy balance, it may be possible to attempt the modeling of the diverse components of energy balance by means of regression equations starting from the net radiation. Those same coefficients distinguish the type of environment: urban, suburban or rural. [Spanish] Las primeras mediciones de balance energetico en la Ciudad de Mexico se realizaron en 1985 en un suburbio al poniente de la ciudad (el observatorio de Tacubaya). Ya en la decada de los anos noventa del siglo XX, dichas observaciones se multiplicaron tanto en el centro historico (antigua Escuela de Minas y en el edificio de la Preparatoria No. 7), como en otros sitios al sur (en terrenos de Ciudad Universitaria) y en la periferia rural (Plan Texcoco). El proposito de estas mediciones ha sido tener un mejor entendimiento de las alteraciones climaticas debidas a la urbanizacion. En este trabajo se presenta una revision

  8. How to Measure Dark Energy with LSST's Strong Gravitational Lenses

    Science.gov (United States)

    Marshall, Philip J.; Treu, T.; Brunner, R. J.; Strong Lensing, LSST; Dark Energy Science Collaborations

    2013-01-01

    Strong gravitational lensing is sensitive to dark energy (DE) via the combinations of angular diameter distances that appear in model predictions of the lens strength. Lenses with variable sources offer the most promise: the corresponding time delay distance has recently been shown to be measurable to 5% precision. Large samples of lensed quasars and supernovae will allow internal degeneracy-breaking and so enable the most direct access to the DE parameters, while multiple source-plane, compound lens systems may provide an alternative, complementary, H0-free probe. Its wide field survey and high cadence will enable LSST to provide a sample of several thousand measured time delays, two orders of magnitude larger than the current sample, and allow an independent, competitive Stage IV DE parameter measurement to be made. However, practical problems to be solved include: lens detection (which may be very sensitive to image quality and deblender performance); image and lightcurve modelling (which could be both CPU and manual labor-intensive); obtaining and analyzing high resolution spectro-imaging follow-up data; and interpreting the whole sample of lenses in the context of the well-studied subset.

  9. Mass Measurement Using Energy Spectra in Three-body Decays

    CERN Document Server

    Agashe, Kaustubh; Kim, Doojin; Wardlow, Kyle

    2016-01-01

    In previous works we have demonstrated how the energy distribution of massless decay products in two body decays can be used to measure the mass of decaying particles. In this work we show how such results can be generalized to the case of multi-body decays. The key ideas that allow us to deal with multi-body final states are an extension of our previous results to the case of massive decay products and the factorization of the multi-body phase space. The mass measurement strategy that we propose is distinct from alternative methods because it does not require an accurate reconstruction of the entire event, as it does not involve, for instance, the missing transverse momentum, but rather requires measuring only the visible decay products of the decay of interest. To demonstrate the general strategy, we study a supersymmetric model wherein pair-produced gluinos each decay to a stable neutralino and a bottom quark-antiquark pair via an off-shell bottom squark. The combinatorial background stemming from the indi...

  10. Energy Levels, wavelengths and hyperfine structure measurements of Sc II

    Science.gov (United States)

    Hala, Fnu; Nave, Gillian

    2018-01-01

    Lines of singly ionized Scandium (Sc II) along with other Iron group elements have been observed [1] in the region surrounding the massive star Eta Carinae [2,3] called the strontium filament (SrF). The last extensive analysis of Sc II was the four-decade old work of Johansson & Litzen [4], using low-resolution grating spectroscopy. To update and extend the Sc II spectra, we have made observation of Sc/Ar, Sc/Ne and Sc/Ge/Ar hollow cathode emission spectrum on the NIST high resolution FT700 UV/Vis and 2 m UV/Vis/IR Fourier transform spectrometers (FTS). More than 850 Sc II lines have been measured in the wavelength range of 187 nm to 3.2 μm. connecting a total of 152 energy levels. The present work also focuses to resolve hyperfine structure (HFS) in Sc II lines. We aim to obtain accurate transition wavelengths, improved energy levels and HFS constants of Sc II. The latest results from work in progress will be presented.Reference[1] Hartman H, Gull T, Johansson S and Smith N 2004 Astron. Astrophys. 419 215[2] Smith N, Morse J A and Gull T R 2004 Astrophys. J. 605 405[3] Davidson K and Humphreys R M 1997 Annu. Rev. Astron. Astrophys. 35[4] Johansson S and Litzén U 1980 Phys. Scr. 22 49

  11. A scintillation detector set measuring the charge particle energy

    International Nuclear Information System (INIS)

    Dore, Chantal.

    1979-01-01

    The S143 experiment, at CERN in 1976, needed both the measurement and the identification of light nuclei, and especially the separation between 3 H and 3 He, over a large energy range. In the chosen solution, in addition to semiconductor detectors, some scintillation counters are used. The non-linearity of light versus energy of charged particles was complicated by the fact there was two different linear laws according to the charge of particles. To obtain good analogic signals over a dynamic range nearly equal to 200, the signals from several dynodes were used simultaneously. In the experimental setting up, each scintillator was put directly in contact with the corresponding photocathode. In spite of a special shielding, some perturbations due to the magnet placed close by required to bring important corrections to linear laws. Thanks to complementary informations from semiconductor counters, a full separation between charge 1 and charge 2 particles was possible. A suitable identification as guaranted among charge 1 particles, but only kinematic constraints gave the possibility to extract 4 He corresponding to the elastic scattering [fr

  12. High-Resolution Measurements of Low-Energy Conversion Electrons

    CERN Multimedia

    Gizon, A; Putaux, J

    2002-01-01

    Measurements of low-energy internal conversion electrons have been performed with high energy resolution in some N = 105 odd and odd-odd nuclei using a semi-circular spectrograph associated to a specific tape transport system. These experiments aimed to answer the following questions~: \\begin{itemize} \\item Do M3 isomeric transitions exist in $^{183}$Pt and $^{181}$Os, isotones of $^{184}$Au~? \\item Are the neutron configurations proposed to describe the isomeric and ground states of $^{184}$Au right or wrong~? \\item Does it exist an isomeric state in $^{182}$Ir, isotone of $^{181}$Os, $^{183}$Pt and $^{184}$Au~? \\item What are the spin and parity values of the excited states of $^{182}$Ir~? \\end{itemize} In $^{183}$Pt, the 35.0 keV M3 isomeric transition has been clearly observed and the reduced transition probability has been determined. The deduced hindrance factor is close to that observed in the neighbouring odd-odd $^{184}$Au nucleus. This confirms the neutron configurations previously proposed for the ...

  13. U. S. Department of Energy Aerial Measuring Systems

    Energy Technology Data Exchange (ETDEWEB)

    J. J. Lease

    1998-10-01

    The Aerial Measuring Systems (AMS) is an aerial surveillance system. This system consists of remote sensing equipment to include radiation detectors; multispectral, thermal, radar, and laser scanners; precision cameras; and electronic imaging and still video systems. This equipment, in varying combinations, is mounted in an airplane or helicopter and flown at different heights in specific patterns to gather various types of data. This system is a key element in the US Department of Energy's (DOE) national emergency response assets. The mission of the AMS program is twofold--first, to respond to emergencies involving radioactive materials by conducting aerial surveys to rapidly track and map the contamination that may exist over a large ground area and second, to conduct routinely scheduled, aerial surveys for environmental monitoring and compliance purposes through the use of credible science and technology. The AMS program evolved from an early program, begun by a predecessor to the DOE--the Atomic Energy Commission--to map the radiation that may have existed within and around the terrestrial environments of DOE facilities, which produced, used, or stored radioactive materials.

  14. U. S. Department of Energy Aerial Measuring Systems

    International Nuclear Information System (INIS)

    Lease, J.J.

    1998-01-01

    The Aerial Measuring Systems (AMS) is an aerial surveillance system. This system consists of remote sensing equipment to include radiation detectors; multispectral, thermal, radar, and laser scanners; precision cameras; and electronic imaging and still video systems. This equipment, in varying combinations, is mounted in an airplane or helicopter and flown at different heights in specific patterns to gather various types of data. This system is a key element in the US Department of Energy's (DOE) national emergency response assets. The mission of the AMS program is twofold--first, to respond to emergencies involving radioactive materials by conducting aerial surveys to rapidly track and map the contamination that may exist over a large ground area and second, to conduct routinely scheduled, aerial surveys for environmental monitoring and compliance purposes through the use of credible science and technology. The AMS program evolved from an early program, begun by a predecessor to the DOE--the Atomic Energy Commission--to map the radiation that may have existed within and around the terrestrial environments of DOE facilities, which produced, used, or stored radioactive materials

  15. Reforms for competitive markets in Pakistan

    OpenAIRE

    Haque, Nadeem; Ahmed, Vaqar; Shahid, Sana

    2011-01-01

    While Pakistan has taken several steps to promote competition in its markets, further reforms are required in improving domestic commerce, agricultural markets and industries. With increasing risks and cost of doing business due to deteriorating law and order situation as well as massive energy shortages, Pakistan needs to compensate its entrepreneurs and investors by enhancing its investment and business climate. By adopting certain administrative and legal reforms, Pakistan can considerably...

  16. Impact of Energy Market Liberalisation of Energy Efficiency Policies and Measures

    International Nuclear Information System (INIS)

    Cerovac, K.

    2001-01-01

    Evolving liberalisation and market forces transform the mindset of energy industry as well as energy consumers. Within the new environment, energy will be generated, traded and consumed like other commodities. Competition and new incentives have a profound influence on energy efficiency incentives and policies. This report aims at identifying the effects of liberalisation on energy efficiency and potential energy policy implications. The report addresses energy efficiency issues throughout the energy cycle from generation, transmission to consumption.(author)

  17. National Target of Energy conservation and Policy Measures

    Energy Technology Data Exchange (ETDEWEB)

    Shim, S.R. [Korea Energy Economics Institute, Euiwang (Korea)

    2001-12-01

    This study investigates impacts of energy saving policies on the national economy in Korea. An energy saving policy for a specific sector causes changes in energy consumption patterns of a target sector as well as the others. In addition to its positive bearing on energy consumption, such policy can change energy prices, output, employment, consumer price levels, and resources allocation in the economy. In this context, successful analyses of energy saving policies need to consider such interactions to develop and evaluate the best policy alternatives. Thus, this study employs a Korean computable general equilibrium model to analyze optimal energy saving targets, and corresponding programs for each sector in the economy. The R and D investment policy in the energy sector is the most effective one since it is projected to increase real GNP and GDP, decreasing energy consumption. The policy is accordingly considered as one of so-called no-regret policies. And, the policy is evaluated to be appropriate for the energy intensive industries and transportation sectors. The government loan program for energy efficiency improvement is also predicted to raise GNP although it may have a negative impact on trade balance. And, the policy is observed to be suitable for the transportation and household sectors. An energy saving effort with energy taxation is found to be cost-effective since its marginal cost of energy conservation is estimated to be much lower than about 80,000 won per ton of oil equivalent, the estimated benefit of energy conservation. It is recommended, however, that an additional energy tax be implemented with care, given the high level of existing energy taxes. The effectiveness of energy efficiency standards in the transportation, household, and commercial sectors varies depending on how prices of relevant energy using equipments and appliances change in response to the standards. Energy saving policies are adequately formulated and implemented for all the

  18. Environment project: 50 measures for a development of the high environmental quality renewable energies

    International Nuclear Information System (INIS)

    2008-11-01

    This document presents the 50 measures decided by the government to develop the renewable energies in France and reach the 20% of participation to the energy production in 2020. Some measures concern all the renewable energies, they deal with the regulation, the administrative procedures of the building, others are specific to each energy. (A.L.B.)

  19. 10 CFR 431.193 - Test procedures for measuring energy consumption of distribution transformers.

    Science.gov (United States)

    2010-01-01

    ... distribution transformers. 431.193 Section 431.193 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Test Procedures § 431.193 Test procedures for measuring energy consumption of distribution transformers. The test...

  20. 40 CFR 73.81 - Qualified conservation measures and renewable energy generation.

    Science.gov (United States)

    2010-07-01

    ... renewable energy generation. 73.81 Section 73.81 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) SULFUR DIOXIDE ALLOWANCE SYSTEM Energy Conservation and Renewable Energy Reserve § 73.81 Qualified conservation measures and renewable energy generation. (a) Qualified energy...

  1. Use of thin ionization calorimeters for measurements of cosmic ray energy spectra

    Science.gov (United States)

    Jones, W. V.; Ormes, J. S.; Schmidt, W. K. H.

    1976-01-01

    The reliability of performing measurements of cosmic ray energy spectra with a thin ionization calorimeter was investigated. Monte Carlo simulations were used to determine whether energy response fluctuations would cause measured spectra to be different from the primary spectra. First, Gaussian distributions were assumed for the calorimeter energy resolutions. The second method employed a detailed Monte Carlo simulation of cascades from an isotropic flux of protons. The results show that as long as the energy resolution does not change significantly with energy, the spectral indices can be reliably determined even for sigma sub e/e = 50%. However, if the energy resolution is strongly energy dependent, the measured spectra do not reproduce the true spectra. Energy resolutions greatly improving with energy result in measured spectra that are too steep, while resolutions getting much worse with energy cause the measured spectra to be too flat.

  2. Grenelle Environnement: passing the energy transition with success; 50 measures for developing renewable energies with a high environmental quality

    International Nuclear Information System (INIS)

    2008-01-01

    One of the objectives of the Grenelle Environnement Forum conclusions is to double the contribution of renewable energies in France by 2020, and reach the level of 20 percent of the final energy consumption. 50 measures have been decided by the French government in order to meet this objective while ensuring a high environmental quality. The 50 measures are detailed: heat production (biomass, geothermal and solar energy, wastes, biogas) and electric power generation (hydroelectricity, terrestrial and marine wind turbines, biomass, photovoltaic solar energy, geothermal and marine energies) are concerned

  3. Adoption of energy-efficiency measures in SMEs—An empirical analysis based on energy audit data from Germany

    International Nuclear Information System (INIS)

    Fleiter, Tobias; Schleich, Joachim; Ravivanpong, Ployplearn

    2012-01-01

    This paper empirically investigates factors driving the adoption of energy-efficiency measures by small and medium-sized enterprises (SMEs). Our analyses are based on cross-sectional data from SMEs which participated in a German energy audit program between 2008 and 2010. In general, our findings appear robust to alternative model specifications and are consistent with the theoretical and still scarce empirical literature on barriers to energy-efficiency in SMEs. More specifically, high investment costs, which are captured by subjective and objective proxies, appear to impede the adoption of energy-efficiency measures, even if these measures are deemed profitable. Similarly, we find that lack of capital slows the adoption of energy-efficiency measures, primarily for larger investments. Hence, investment subsidies or soft loans (for larger investments) may help accelerating the diffusion of energy-efficiency measures in SMEs. Other barriers were not found to be statistically significant. Finally, our findings provide evidence that the quality of energy audits affects the adoption of energy-efficiency measures. Hence, effective regulation should involve quality standards for energy audits, templates for audit reports or mandatory monitoring of energy audits. - Highlights: ► We empirically analyze barriers to the adoption of energy-efficiency measures in SMEs. ► We focus on firms participating in the German energy audit program for SMEs. ► The program overcomes information related barriers. ► High investment costs still impede the adoption even for profitable measures. ► Low audit quality also impedes the adoption of profitable measures.

  4. Jet energy measurements at ILC. Calorimeter DAQ requirements and application in Higgs boson mass measurements

    International Nuclear Information System (INIS)

    Ebrahimi, Aliakbar

    2017-11-01

    The idea of spontaneous symmetry breaking as the mechanism through which elementary particles gain mass has been confirmed by the discovery of the Higgs boson at the CERN Large Hadron Collider. Studying the Higgs boson properties are of great importance to verify the Standard Model predictions. Any deviation from these predictions could uncover physics beyond the Standard Model. The mass of the Higgs boson is one of the important parameters of the Standard Model. The precise determination of the Higgs boson mass is of interest in its own right and also for other Higgs physics studies since it enters as parametric uncertainty into the extraction of the partial width from branching ratio measurements. The International Linear Collider (ILC) is a future polarised e + e - collider designed for precision physics studies. The Higgs boson decay to a pair of bottom quarks H→b anti b has the largest branching ratio of all Higgs decays, providing a large dataset for physics analyses. The possibility of measuring the Higgs boson mass in the e + e - →ZH→q anti qb anti b channel is investigated in this thesis for centre-of-mass energies of 350 GeV and 500 GeV. Since the Higgs boson mass is reconstructed from two b jets, the jet energy resolution hasa high impact on the measurement. A new method to estimate the jet energy resolution for each jet individually is developed in this thesis. The jet-specific energy resolution is then used in the analysis for the Higgs boson mass measurements. Various strategies for the Higgs boson mass measurement are investigated. For an integrated luminosity of 1000 fb -1 and a beam polarisation of (-0.8,+0.3), statistical uncertainties of 42 MeV and 89 MeV are achieved for the centre-of-mass energies of 350 GeV and 500 GeV, respectively. Various sources of systematic uncertainties are also discussed. These results are obtained using a full GEANT4-based simulation of the International Large Detector (ILD) concept. The jet energy resolution

  5. Jet energy measurements at ILC. Calorimeter DAQ requirements and application in Higgs boson mass measurements

    Energy Technology Data Exchange (ETDEWEB)

    Ebrahimi, Aliakbar

    2017-11-15

    The idea of spontaneous symmetry breaking as the mechanism through which elementary particles gain mass has been confirmed by the discovery of the Higgs boson at the CERN Large Hadron Collider. Studying the Higgs boson properties are of great importance to verify the Standard Model predictions. Any deviation from these predictions could uncover physics beyond the Standard Model. The mass of the Higgs boson is one of the important parameters of the Standard Model. The precise determination of the Higgs boson mass is of interest in its own right and also for other Higgs physics studies since it enters as parametric uncertainty into the extraction of the partial width from branching ratio measurements. The International Linear Collider (ILC) is a future polarised e{sup +}e{sup -} collider designed for precision physics studies. The Higgs boson decay to a pair of bottom quarks H→b anti b has the largest branching ratio of all Higgs decays, providing a large dataset for physics analyses. The possibility of measuring the Higgs boson mass in the e{sup +}e{sup -}→ZH→q anti qb anti b channel is investigated in this thesis for centre-of-mass energies of 350 GeV and 500 GeV. Since the Higgs boson mass is reconstructed from two b jets, the jet energy resolution hasa high impact on the measurement. A new method to estimate the jet energy resolution for each jet individually is developed in this thesis. The jet-specific energy resolution is then used in the analysis for the Higgs boson mass measurements. Various strategies for the Higgs boson mass measurement are investigated. For an integrated luminosity of 1000 fb{sup -1} and a beam polarisation of (-0.8,+0.3), statistical uncertainties of 42 MeV and 89 MeV are achieved for the centre-of-mass energies of 350 GeV and 500 GeV, respectively. Various sources of systematic uncertainties are also discussed. These results are obtained using a full GEANT4-based simulation of the International Large Detector (ILD) concept. The

  6. Identification of parameters for embodied energy measurement: A literature review

    Energy Technology Data Exchange (ETDEWEB)

    Dixit, Manish Kumar; Fernandez-Solis, Jose L.; Lavy, Sarel; Culp, Charles H. [College of Architecture, Texas A and M University, 3137 TAMU, College Station, TX 77843-3137 (United States)

    2010-08-15

    The building construction industry consumes a large amount of resources and energy and, owing to current global population growth trends, this situation is projected to deteriorate in the near future. Buildings consume approximately 40 percent of total global energy: during the construction phase in the form of embodied energy and during the operation phase as operating energy. Embodied energy is expended in the processes of building material production (mining and manufacture), on-site delivery, construction and assembly on-site, renovation and final demolition. Recent studies have considered the significance of embodied energy inherent in building materials, with a specific focus on this fraction of sequestered energy. Current interpretations of embodied energy are quite unclear and vary greatly, and embodied energy databases suffer from problems of variation and incomparability. Furthermore, there is no reliable template, standard or protocol regarding embodied energy computations that could address these problems in embodied energy inventories. This paper focuses on the analysis of existing literature in order to identify differing parameters so that development of a consistent and comparable database can be facilitated. (author)

  7. Lesotho - Land Administration Reform

    Data.gov (United States)

    Millennium Challenge Corporation — Michigan State University was assigned to design the impact evaluation (IE) of the Land Administration Reform Project (LARP) funded under the Millennium Challenge...

  8. Philippines - Revenue Administration Reform

    Data.gov (United States)

    Millennium Challenge Corporation — The Millennium Challenge Account-Philippines' (MCA-P) implementation of the Revenue Administration Reform Project (RARP) is expected to improve tax administration,...

  9. Can Community Colleges Afford to Improve Completion? Measuring the Costs and Efficiency Effects of College Reforms. CCRC Working Paper No. 55

    Science.gov (United States)

    Belfield, Clive; Crosta, Peter; Jenkins, Davis

    2013-01-01

    Community colleges are under pressure to increase completion rates and efficiency despite limited evidence of the economic consequences of different reform strategies. We introduce an economic model of student course pathways linked to college expenditures and revenues. Using detailed data from a single college, we calculate baseline efficiency…

  10. Energetic-economical analysis of a stationary for energy generation with fuel cells and natural gas reforming; Analise energetico-economica de um sistema estacionario de geracao de energia com celulas a combustivel e reforma de gas natural

    Energy Technology Data Exchange (ETDEWEB)

    Furtado, Jose Geraldo de Melo; Silva Junior, Fernando Rodrigues; Silva, Cristiane Abrantes da; Soares, Guilherme Fleury Wanderley; Lopes, Francisco da Costa; Serra, Eduardo Torres [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil)]. E-mail: furtado@cepel.br; Codeceira Neto, Alcides [Companhia HidroEletrica do Sao Francisco (CHESF), Recife, PE (Brazil)

    2008-07-01

    Power systems based on fuel cells have been considered for residential and commercial applications in energy Distributed Generation (DG) market as these systems can minimize their acquisition, installation and operation high costs. In this work we present an experimental analysis of a power generation system formed by a 5 kW proton exchange membrane fuel cell unit and a natural gas reformer (fuel processor) for hydrogen production, of the CEPEL's Fuel Cell Laboratory. It was determined the electrical performance of the cogeneration system in function of the design and operational power plant parameters. Additionally, it was verified the influence of the activation conditions of the fuel cell electrocatalytic system on the system performance. It also appeared that the use of hydrogen produced from the natural gas catalytic reforming provided the system operation in excellent electrothermal stability conditions resulting in increase of the energy conversion efficiency and of the economicity of the cogeneration power plant. The maximum electrical efficiency achieved was around 38% and in all power range unit operated with average potential per single fuel cell higher than 0.60 V. (author)

  11. Noninterceptive beam energy measurements in line D of the Los Alamos Meson Physics Facility

    International Nuclear Information System (INIS)

    Gilpatrick, J.D.; Carter, H.; Plum, M.; Power, J.F.; Rose, C.R.; Shurter, R.B.

    1995-01-01

    Several members of the Accelerator and Operations Technology (AOT) division beam-diagnostics team performed time-of-flight (TOF) beam-energy measurements in line D of the Los Alamos Meson Physics Facility (LAMPF) using developmental beam time. These measurements provided information for a final design of an on-line beam energy measurement. The following paper discusses these measurements and how they apply to the final beam energy measurement design

  12. Measure Guideline. Energy-Efficient Window Performance and Selection

    Energy Technology Data Exchange (ETDEWEB)

    Carmody, John [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR; Haglund, Kerry [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR

    2012-11-01

    This document provides guidelines for the selection of energy-efficient windows in new and existing residential construction in all U.S. climate zones. It includes information on window products, their attributes and performance. It provides cost/benefit information on window energy savings as well as information on non-energy benefits such as thermal comfort and reduced HVAC demands. The report also provides information on energy impacts of design decisions such as window orientation, total glazing area and shading devices and conditions. Information on resources for proper window installation is included as well.

  13. Medium energy measurements of N-N parameters

    International Nuclear Information System (INIS)

    Ambrose, D.; Bachman, M.; Coffey, P.; Glass, G.; Jobst, B.; McNaughton, K.H.; Nguyen, C.; Riley, P.J.

    1993-01-01

    The authors report here progress made during the three year period January 1, 1990, to December 31, 1993, for the Department of Energy Three-Year Grant No. DE-FG05-88ER40446, third year. A major part of the work has been associated with nucleon-nucleon (N-N) research carried out at the Nucleon Physics Laboratory (NPL) at the Los Alamos Meson Physics Facility (LAMPF). During this period they also completed data acquisition and analyses of a TRIUMF experiment, but they have no further plans for experimental work at TRIUMF. Other research has been and will be continued to be carried out at BNL, and involves two rare kaon decay experiments, BNL E791, now completed, and a second generation rare kaon decay experiment, E871, which has just this summer completed an engineering test run. The authors are now also members of a proposed experiment, STAR, (Solenoidal Tracker at RHIC) to be carried out at the Relativistic Heavy Ion Collider facility, RHIC, at BNL. The past three years have been a time of rapid change in the focus of the experimental program. A LAMPF experiment, E1097, in which they spent a large amount of effort during the past three years, was terminated due to funding shortages after they had fabricated the detector, but before data acquisition, and consequently they increased their participation in the rare kaon experiment at BNL, E871. It now appears that there will be no LAMPF N-N program after 1993, so that the research efforts will concentrate on the BNL rare kaon decay measurement, E871, and on STAR. The authors expect that STAR, which requires the fabrication of a large colliding beam detector facility, will use an increasing amount of their research efforts during the next few years. In what follows they describe recent progress on the LAMPF and TRIUMF N-N measurements, on the BNL rare kaon decay work, and on the initial work with the STAR group

  14. NiCo as catalyst for magnetically induced dry reforming of methane

    Science.gov (United States)

    Varsano, F.; Bellusci, M.; Provini, A.; Petrecca, M.

    2018-03-01

    In this paper we report the activation of the dry reforming reaction by induction heating of a NiCo alloy. The catalyst plays a double role, serving both as a promoter for the reforming reaction and producing the heat induced by dissipation of the electromagnetic energy. The elevated temperatures imposed by the reforming reaction suggest the choice of an alloy with a Curie temperature >800°C. In this respect Ni:Co ratio 60:40 was chosen. Alloy active sites for CH4and CO2activation are created by a mechanochemical treatment of the alloy that increases solid-state defects. The catalyst has been successfully tested in a continuous-flow reactor working under atmospheric pressure. Methane conversion and hydrogen production yields have been measured as a function of the applied magnetic field, reactant flow rate and time on stream.

  15. How "Doing Business" jeopardizes institutional reform

    OpenAIRE

    Arruñada, Benito

    2008-01-01

    Simplifying business formalization and eliminating outdated formalities is often a good way of improving the institutional environment for firms. Unfortunately, the World Bank’s "Doing Business" project is harming such policies by promoting a reform agenda that gives them priority even in countries lacking functional business registers, so that the reformed registers keep producing valueless information, but faster. Its methodology also promotes biased measurements that impede proper consider...

  16. Cognitive determinants of energy balance-related behaviours : measurement issues

    NARCIS (Netherlands)

    Kremers, Stef P J; Visscher, Tommy L S; Seidell, Jacob C; van Mechelen, Willem; Brug, Johannes

    2005-01-01

    The burden of disease as a result of overweight and obesity calls for in-depth examination of the main causes of behavioural actions responsible for weight gain. Since weight gain is the result of a positive energy balance, these behavioural actions are referred to as 'energy balance-related

  17. Energy supply security in Europe: principles and measures

    International Nuclear Information System (INIS)

    Keppler, J.H.

    2007-01-01

    After having recalled a dozen of reasons for some worries about energy supply security in Europe during the past months (oil price increase, intentional interruption of gas and oil deliveries by Russia respectively to Ukraine and Belarus, creation of a new CO 2 trading scheme, tensions on the European electricity markets, and so on), the author distinguishes and discusses those which are actually a threat to energy supply and those which are not. Then, he proposes a classification of these threats in relationship with the reasons for delivery interruption, production capacity limitation, or price increase. These reasons can be political situations and decisions, technical problems, commercial reasons. Then, the author examines what European policy makers can do to manage these risks and ensure energy supply security. This needs economic as well as political responses, coherence between domestic energy policies and energy supply security, and an efficient foreign policy based on a multilateral approach

  18. Measure Guideline: Energy-Efficient Window Performance and Selection

    Energy Technology Data Exchange (ETDEWEB)

    Carmody, J.; Haglund, K.

    2012-11-01

    This document provides guidelines for the selection of energy-efficient windows in new and existing residential construction in all US climate zones. It includes information on window products, their attributes and performance. It provides cost/benefit information on window energy savings as well as information on non-energy benefits such as thermal comfort and reduced HVAC demands. The document also provides information on energy impacts of design decisions such as window orientation, total glazing area and shading devices and conditions. Information on resources for proper window installation is included as well. This document is for builders, homeowners, designers and anyone making decisions about selecting energy efficient window. It is intended to complement other Building America information and efforts.

  19. The Multiple Benefits of Measures to Improve Energy Efficiency

    DEFF Research Database (Denmark)

    Puig, Daniel; Farrell, Timothy Clifford

    Understanding the barriers to, and enablers for, energy efficiency requires targeted information and analysis. This report is a summary of four detailed studies providing new insights on how to promote efficiency in selected priority areas. It complements initiatives such as the so-called energy...... in a scenario where the price of carbon dioxide equivalents was USD 70 per tonne. • In absolute terms, the energy supply and industry sectors show the highest reductions in greenhouse gas emissions attributable to energy efficiency. In relative terms, it is the transport sector that shows the highest levels...... of emission reductions. • The three mitigation scenarios considered suggest that the higher the carbon price, the greater the energy savings, and the larger the economic growth and employment benefits. • While G20 countries account for about 90 percent of total emission reductions in the three mitigation...

  20. Decree No. 2.363 of 21 October 1987 abolishing the National Institute of Colonization and Agrarian Reform--INCRA, creating the Legal Institute of Rural Land--INTER, and other measures.

    Science.gov (United States)

    1989-01-01

    This Decree abolishes the Brazilian National Institute of Colonization and Agrarian Reform (INCRA) and creates a Legal Institute of Rural Land (INTER) linked to the Ministry of Agrarian Reform (MIRAD) to perform the activities of INCRA. MIRAD will henceforth be responsible for the rights, powers, and obligations of INCRA and will supervise INCRA's property and resources. In this capacity MIRAD will supervise, coordinate, and execute activities related to agrarian reform and agricultural policy. Among these activities are the promotion of social justice and productivity through 1) the just and adequate distribution of ownership of rural land, 2) limitation of the acquisition of rural property by foreigners, and 3) encouragement of the harmonious development of rural life. In developing such activities MIRAD is to make use of legal measures contained in land law, including those relating to the selection of public rural lands, the privatization of rural land through regularization of ownership, colonization, zoning, and taxation. It is also authorized to expropriate and distribute unexploited or improperly exploited land to worker families, with priority going to labor cooperatives. Further provisions establish rules on expropriation. Among these is the requirement that forests must be protected.

  1. Thinking about Tax Reform.

    Science.gov (United States)

    Boskin, Michael J.

    1985-01-01

    Providing pre-college teachers with an analysis of tax reform is the primary goal of this publication. The present tax system is both inefficient and inequitable. Three goals of tax reform proposals are detailed: (1) fairness--the dimensions of horizontal equity, or equal treatment of equals however defined, and vertical equity, reflecting the…

  2. Tax Reform & University Development.

    Science.gov (United States)

    Myers, John Holt

    This brochure discusses the implications of the Tax Reform Act of 1969 for university and college development officers charged with the responsibility for solicitation of gifts, bequests and grants from foundations. The solicitation of deferred gifts, bequests and grants from foundations is discussed in chapter one in relation to tax reform and…

  3. Life After Tax Reform.

    Science.gov (United States)

    Clotfelter, Charles T.

    1987-01-01

    The impact of the Tax Reform Act of 1986 on higher education is discussed. Background on the tax reform movement and the specific provisions of the 1986 law are examined. The law will reduce private donations, raise the cost of college, and raise the cost of operating institutions. (MLW)

  4. Accelerator beam test of the kinematic lightweight energy meter detector prototype for very high energy cosmic ray measurements in space

    CERN Document Server

    Bashindzhagian, G L

    2004-01-01

    The idea of the KLEM (Kinematic Lightweight Energy Meter) detector is to directly measure the elemental energy spectra of very high-energy cosmic rays in space by determining the angular distribution of secondary particles produced in a target. The first test of the simple KLEM prototype was performed at the CERN SPS test-beam with 180 GeV pions. The results of the first test analysis confirm that, using the KLEM method, the energy of 180 GeV pions can be measured with a relative error of about 67%, which is very close to the results of the simulation (65 %).

  5. Health reform through tax reform: a primer.

    Science.gov (United States)

    Furman, Jason

    2008-01-01

    Tax incentives for employer-sponsored insurance and other medical spending cost about $200 billion annually and have pervasive effects on coverage and costs. This paper surveys a range of proposals to reform health care, either by adding new tax incentives or by limiting or replacing the existing tax incentives. Replacing the current tax preference for insurance with an income-related, refundable tax credit has the potential to expand coverage and reduce inefficient spending at no net federal cost. But such an approach by itself would entail substantial risks, so complementary reforms to the insurance market are essential to ensure success.

  6. Enhancing China’s Energy Security: Determining Influential Factors ad Effective Strategic Measures

    DEFF Research Database (Denmark)

    Ren, Jingzheng; Sovacool, Benjamin, K.

    2014-01-01

    to determine the priorities of the strategic measures with respect to enhancing those same factors. The study argues that a low proportion of renewable energy penetration is the most severe factor threatening China’s energy security, and that conducting research and development on energy technologies......This study investigates the most influential factors affecting China’s energy security. It also identifies the most effective strategic measures for enhancing it. Fuzzy AHP has been used to determine weights for ranking the importance of Chinese energy security factors, and it has also been used...... and improving energy efficiency is the most salient, positive, and necessary strategic measure....

  7. Enhancing China’s energy security: Determining influential factors and effective strategic measures

    International Nuclear Information System (INIS)

    Ren, Jingzheng; Sovacool, Benjamin K.

    2014-01-01

    Highlights: • The most influential factors affecting China’s energy security are identified. • Fuzzy AHP is used to quantify the importance of influential factors. • Strategic measures for enhancing China’s energy security are prioritized. • Fuzzy AHP is used to determine the priorities of the strategic measures. - Abstract: This study investigates the most influential factors affecting China’s energy security. It also identifies the most effective strategic measures for enhancing it. Fuzzy AHP has been used to determine weights for ranking the importance of Chinese energy security factors, and it has also been used to determine the priorities of the strategic measures with respect to enhancing those same factors. The study argues that a low proportion of renewable energy penetration is the most severe factor threatening China’s energy security, and that conducting research and development on energy technologies and improving energy efficiency is the most salient, positive, and necessary strategic measure

  8. The Danish Police Reform

    DEFF Research Database (Denmark)

    Degnegaard, Rex; Mark, Sofie

    2013-01-01

    and private organisations doing business-in-society. The case concerns the reformation of the Danish Police. In 2007 the Danish Police started implementing an extensive reform that affected all parts of the organisation. Despite thorough planning of the process including several change management initiatives...... for organisations to work with transparency and involvement with the aim of upholding and further developing a social responsibility to their environment. This case on the other hand takes an inside-out perspective on social responsibility by illustrating how social responsibility is necessary for public......, the reform process was problematic and the following years were challenging and filled with changes and turbulence. Media, politicians and the police itself directed heavy criticism towards the effects of the reform and reviews of the reform as well as of the work of the police were carried out resulting...

  9. Measuring energy expenditure in sports by thermal video analysis

    DEFF Research Database (Denmark)

    Gade, Rikke; Larsen, Ryan Godsk; Moeslund, Thomas B.

    2017-01-01

    Estimation of human energy expenditure in sports and exercise contributes to performance analyses and tracking of physical activity levels. The focus of this work is to develop a video-based method for estimation of energy expenditure in athletes. We propose a method using thermal video analysis...... of oxygen uptake. These initial experiments indicate a correlation between estimated step frequency and oxygen uptake. Based on the preliminary results we conclude that the proposed method has potential as a future non-invasive approach to estimate energy expenditure during sports....

  10. Measuring the security of external energy supply in the European Union

    DEFF Research Database (Denmark)

    Le Coq, Chloe; Paltseva, Elena

    2009-01-01

    The security of energy supply is one of the main objectives of EU energy policy. In this paper, we introduce an index designed to evaluate the short-term risks associated with the external supply of energy to the EU Member States. It combines measures of energy import diversification, political r...

  11. A BaF2 crystal array for high energy -ray measurements

    Indian Academy of Sciences (India)

    The measurement of high energy 7-ray photons is an important area of current research in nuclear physics. The high energy 7-rays from GDR decay gives us valuable information about the shape of nuclei and equation of state of nuclear matter. The high energy 7-rays above GDR 7-ray energy are primarily produced due to ...

  12. Two Methods for Normalisation of Measured Energy Performance—Testing of a Net-Zero Energy Building in Sweden

    Directory of Open Access Journals (Sweden)

    Björn Berggren

    2017-10-01

    Full Text Available An increasing demand for energy-efficient buildings has led to an increasing focus on predicted energy performance once a building is in use. Many studies have identified a performance gap between predicted energy use and actual measured energy use once buildings are in the user phase. However, none of the identified studies normalise measured energy use for both internal and external deviating boundary conditions. This study uses a Net-zero energy building (Net ZEB building in Sweden to test two different approaches to the normalisation of measured energy use—static and dynamic methods. The normalisation of energy use for a ground source heat pump reduces the performance gap from 12% to 1–5%, depending on the method of normalisation. The normalisation of energy from photovoltaic (PV panels reduces the performance gap from 17% to 5%, regardless of the method used. The results show that normalisation is important in order to accurately determine the energy performance of buildings. The most important parameters are the indoor temperature and internal loads, which have the largest effect on normalisation in this case study. Furthermore, the case study shows that it is possible to build Net ZEB buildings with existing technologies in a Northern European climate.

  13. Measurement of the cosmic ray energy spectrum using hybrid events of the Pierre Auger Observatory

    NARCIS (Netherlands)

    Settimo, Mariangela; Abreu, P.; Aglietta, M.; Ahlers, M.; Ahn, E.J.; Albuquerque, IFM; Allard, D.; Allekotte, I.; Allen, J.; Allison, P.; Almela, A.; Alvarez Castillo, J.; Alvarez-Muiz, J.; Alves Batista, R.; Ambrosio, M.; Aminaei, A; Anchordoqui, L.; Andring, S.; Anticic, T.; Aramo, C.; Arqueros, F.; Asorey, H.; Assis, P.; Aublin, J.; Ave, M.; Avenier, M.; Avila, G.; Badescu, A.M.; Barber, K.B.; Barbosa, A.F.; Bardenet, R.; Baughman, B.; Bauml, J.; Baus, C.; Beatty, J.J.; Becker, K.H.; Belletoile, A.; Bellido, J.A.; BenZvi, S.; Berat, C.; Bertou, X.; Biermann, P.L.; Billoir, P.; Blanco, F.; Blanco, M.; Bleve, C.; Blumer, H.; Bohacova, M.; Boncioli, D.; Bonifazi, C.; Bonino, R.; Boroda, N.; Brack, J.; Brancus, I.; Brogueira, P.; Brown, W.C.; Bruijn, R.; Buchholz, P.; Bueno, A.; Buroker, L.; Burton, R.E.; Cabellero-Mora, K.S.; Caccianiga, B.; Caramete, L.; Caruso, R.; Castellina, A.; Catalano, O.; Cataldi, G.; Cazon, L.; Cester, R.; Chauvin, J.; Cheng, S.H.; Chiavassa, A.; Chinellato, J.A.; Chirinos Diaz, J.; Chudoba, J.; Cilmo, M.; Clay, R.W.; Cocciolo, G.; Collica, L.; Coluccia, M.R.; Conceicao, R.; Contreras, F.; Cook, H.; Cooper, M.J.; Coppens, J.; Cordier, A.; Coutu, S.; Covault, C.E.; Creusot, A.; Criss, A.; Cronin, J.; Curutiu, A.; Dagoret-Campagne, S.; Dallier, R.; Daniel, B.; Dasso, S.; Daumiller, K.; Dawson, B.R.; de Almeida, R.M.; De Domenico, M.; De Donato, C.; de Jong, S.J.; De La Vega, G.; de Mello Junior, W.J.M.; de Mello Neto, J.R.T.; De Mitri, I.; de Souza, V.; de Vries, K.D.; del Peral, L.; del Rio, M.; Deligny, O.; Dembinski, H.; Dhital, N.; Di Giulio, C.; Diaz Castro, M.L.; Diep, P.N.; Diogo, F.; Dobrigkeit, C.; Docters, W.; D'Olivo, J.C.; Dong, PN; Dorofeev, A.; dos Anjos, JC; Dova, M.T.; D'Urso, D.; Dutan, I.; Ebr, J.; Engel, R.; Erdmann, M.; Escobar, C.O.; Espadanal, J.; Etchegoyen, A.; Facal San Luis, P.; Falcke, H.; Fang, K.; Farrar, G.; Fauth, A.C.; Fazzini, N.; Ferguson, A.P.; Fick, B.; Figueira, J.M.; Filevich, A.; Filevich, A.; Fliescher, S.; Fracchiolla, C.E.; Fraenkel, E.D.; Fratu, O.; Frohlich, U.; Fuchs, B.; Gaior, R.; Gamarra, R.F.; Gambetta, S.; Garcia, B.; Garcia Roca, S.T.; Garcia-Gamez, D.; Garcia-Pinto, D.; Garilli, G.; Gascon Bravo, A.; Gemmeke, H.; Ghia, P.L.; Giller, M.; Gitto, J.; Glass, H.; Gold, M.S.; Golup, G.; Gomez Albarracin, F.; Gomez Berisso, M.; Gomez Vitale, P.F.; Goncalves, P.; Gonzalez, J.G.; Gookin, B.; Gorgi, A.; Gouffon, P.; Grashorn, E.; Grebe, S.; Griffith, N.; Grillo, A.F.; Guardincerri, Y.; Guarino, F.; Guedes, G.P.; Hansen, P.; Harari, D.; Harrison, T.A.; Harton, J.L.; Haungs, A.; Hebbeker, T.; Heck, D.; Herve, A.E.; Hill, G.C.; Hojvat, C.; Hollon, N.; Holmes, V.C.; Homola, P.; Horandel, J.R.; Horvath, P.; Hrabovsky, M.; Huber, D.; Huege, T.; Insolia, A.; Ionita, F.; Italiano, A.; Jansen, S.; Jarne, C.; Jiraskova, S.; Josebachuili, M.; Kadija, K.; Kampert, K.H.; Karhan, P.; Kasper, P.; Katkov, I.; Kegl, B.; Keilhauer, B.; Keivani, A.; Kelley, J.L.; Kemp, E.; Kieckhafer, R.M.; Klages, H.O.; Kleifges, M.; Kleinfeller, J.; Knapp, J.; Koang, D.H.; Kotera, K.; Krohm, N.; Kromer, O.; Kruppke-Hansen, D.; Kuempel, D.; Kulbartz, J.K.; Kunka, N.; La Rosa, G.; Lachaud, C.; LaHurd, D.; Latronico, L.; Lauer, R.; Lautridou, P.; Le Coz, S.; Leao, M.S.A.B.; Lebrun, D.; Lebrun, P.; Leigui de Oliveira, M.A.; Letessier-Selvon, A.; Lhenry-Yvon, I.; Link, K.; Lopez, R.; Lopez Aguera, A.; Louedec, K.; Lozano Bahilo, J.; Lu, L.; Lucero, A.; Ludwig, M.; Lyberis, H.; Maccarone, M.C.; Macolino, C.; Maldera, S.; Maller, J.; Mandat, D.; Mantsch, P.; Mariazzi, A.G.; Marin, J.; Marin, V.; Maris, I.C.; Marquez Falcon, H.R.; Marsella, G.; Martello, D.; Martinez, H.; Martinez Bravo, O.; Martraire, D.; Masias Meza, [No Value; Mathes, H.J.; Matthews, J.; Matthews, J.A.J.; Matthiae, G.; Maurel, D.; Maurizio, D.; Mazur, P.O.; Medina-Tanco, G.; Melissas, M.; Melo, D.; Menichetti, E.; Menshikov, A.; Mertsch, P.; Messina, S.; Meurer, C.; Meyhandan, R.; Mi'canovi'c, S.; Micheletti, M.I.; Minaya, I.A.; Miramonti, L.; Molina-Bueno, L.; Mollerach, S.; Monasor, M.; Monnier Ragaigne, D.; Montanet, F.; Morales, B.; Morello, C.; Moreno, J.C.; Mostafa, M.; Moura, C.A.; Muller, M.A.; Muller, G.; Munchmeyer, M.; Mussa, R.; Navarra, G.; Navarro, J.L.; Navas, S.; Necesal, P.; Nellen, L.; Nelles, A.; Neuser, J.; Nhung, P.T.; Niechciol, M.; Niemietz, L.; Nierstenhoefer, N.; Nitz, D.; Nosek, D.; Nozka, L.; Oehlschlager, J.; Olinto, A.; Ortiz, M.; Pacheco, N.; Pakk Selmi-Dei, D.; Palatka, M.; Pallotta, J.; Palmieri, N.; Parente, G.; Parizot, E.; Parra, A.; Pastor, S.; Paul, T.; Pech, M.; Pekala, J.; Pelayo, R.; Pepe, I.M.; Perrone, L.; Pesce, R.; Petermann, E.; Petrera, S.; Petrolini, A.; Petrov, Y.; Pfendner, C.; Piegaia, R.; Pierog, T.; Pieroni, P.; Pimenta, M.; Pirronello, V.; Platino, M.

    The energy spectrum of ultra-high energy cosmic rays above 10(18)eV is measured using the hybrid events collected by the Pierre Auger Observatory between November 2005 and September 2010. The large exposure of the Observatory allows the measurement of the main features of the energy spectrum with

  14. An approach for holistic energy retrofitting based on assessment of economic viability and durability of energy saving measures

    DEFF Research Database (Denmark)

    Morelli, Martin

    2014-01-01

    saving measures and forget to consider, whether it is more prudent to demolished the building and erect a new building. An evaluation approach is presented to assess whether to retrofit an existing building or to demolish and replace it. The primary concept of the method is to develop a retrofitting...... as constraint to determine the amount of building retrofitting for implementation. The approach includes also durability assessments of the energy saving measures. An example is carried out to illustrate the application of the approach. The example highlights the importance of including risk assessment...... and durability evaluation of the energy saving measures when performing holistic energy retrofitting of buildings....

  15. New process model proves accurate in tests on catalytic reformer

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar-Rodriguez, E.; Ancheyta-Juarez, J. (Inst. Mexicano del Petroleo, Mexico City (Mexico))

    1994-07-25

    A mathematical model has been devised to represent the process that takes place in a fixed-bed, tubular, adiabatic catalytic reforming reactor. Since its development, the model has been applied to the simulation of a commercial semiregenerative reformer. The development of mass and energy balances for this reformer led to a model that predicts both concentration and temperature profiles along the reactor. A comparison of the model's results with experimental data illustrates its accuracy at predicting product profiles. Simple steps show how the model can be applied to simulate any fixed-bed catalytic reformer.

  16. Data Center Energy Efficiency Measurement Assessment Kit Guide and Specification

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-10-26

    A portable and temporary wireless mesh assessment kit can be used to speed up and reduce the costs of a data center energy use assessment and overcome the issues with respect to shutdowns. The assessment kit is comprised of temperature, relative humidity, and pressure sensors. Also included are power meters that can be installed on computer room air conditioners (CRACs) without intrusive interruption of data center operations. The assessment kit produces data required for a detailed energy assessment of the data center.

  17. Energy efficiency policies and measures in Norway: monitoring of energy efficiency in EU27, Norway and Croatia (ODYSSEE-MURE)

    Energy Technology Data Exchange (ETDEWEB)

    Rosenberg, Eva

    2009-09-15

    This report represents the national case study of Norway for the EIE-project 'Monitoring of Energy Demand Trends and Energy Efficiency in the EU - ODYSSEE-MURE'. It presents the recent energy efficiency trends in Norway on the basis of indicators extracted from the ODYSSEE database. Total energy consumption (not including energy as feedstock) has increased from 16.6 M toe (195 TWh) in 1990 to 19.2 M toe (226 TWh) in 2007 and has been relatively constant the last ten years. Energy consumption in manufacturing industry has increased by 10 % from 1990 to 2007, but is lower in 2007 than in 1998. Final energy use in households has increased from 3515 k toe (41 TWh) in 1990 to 3826 (45 TWh) in 2007. The climate corrected energy use has been at approximately 4000 k toe since the mid 1990s. It seems to be an interrupt in the increase of energy use in households, despite the growth of all common used drivers in this sector. Energy efficiency policies and measures implemented since 1990 have contributed to improve the efficiency by 13 %, or 0.7 % per year; this means that if these policies and measures would not have been implemented, the final energy consumption would have been 13 % higher in 2007 (or approximately 1.9 M toe or 22 TWh). (Author)

  18. Russian electricity reform. Emerging challenges and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    The Russian Government is pursuing a strategy of very high economic growth, with the objective of doubling gross domestic product in ten years. It recognises the central role the electricity sector has to play to achieve this target and has embarked on a highly ambitious program of electricity reform. If it is to succeed, the reform program will have to create market structures, market rules and a regulatory framework that will foster competitive wholesale and retail electricity markets. At the same time, it will have to deal with sensitive social issues related to tariff rebalancing and the removal of cross subsidies. Only competitive markets based on transparent prices that reflect costs can deliver the efficient, reliable and internationally competitive performance needed to meet the government's economic targets. Such markets are essential to attract new investment that will be required to ensure security of electricity supply after 2010. This book focuses on key aspects of the proposed reform that could have an important bearing on its success. It also raises concerns as to the pace of reform in related areas, such as the need for complementary reforms in the Russian natural gas sector. The IEA commends the Russian Government on its efforts to embrace this electricity reform - a key element critical to meeting the challenges ahead in terms of its economic growth and energy security. 17 figs., 10 tabs., 3 maps.

  19. Power sector reforms in India

    Energy Technology Data Exchange (ETDEWEB)

    Bajaj, Harbans L.; Sharma, Deepak

    2007-07-01

    India faces endemic electrical energy and peaking shortages. The Power Sector is plagued with mounting commercial losses due various inefficiencies, colossal commercial and technical losses and increasing subsidy burden on the states. These shortages have had a very detrimental effect on the overall economic growth of the country. In order to re-vitalise the sector and improve the techno-economic performance, the Government of India has initiated the reform process in 1991. This paper analyses the pre-reform era and identifies the key concerns which led to the initiation of the reforms. It also analyses the likely impact of the major policy and regulatory initiatives that have been undertaken since 1991 including the provisions of the new enactments which have come into force eventually in the form of The Electricity Act, 2003. This paper details out the key features of the Act and its likely impact on the Indian electricity industry in the emerging scenario. The paper also discusses major issues like power trading, role of regulator in the new regime, issue of open access, introduction of power markets and role of Appellate Tribunal for Electricity in harmonizing the orders of the various regulators.

  20. Exploring energy saving policy measures by renewable energy supplying cooperatives (REScoops)

    NARCIS (Netherlands)

    Coenen, Franciscus H.J.M.; Hoppe, Thomas; Chalkiadakis, Georgios; Tsoutsos, Theocharis; Akasiadis, Charilaos

    2017-01-01

    Cooperatives for renewable energy supply (REScoops) provide their members renewably generated energy within a cooperative model that enables members to co-decide on the cooperative’s future. REScoops do not only collectively own renewable energy production facilities and supply this to their

  1. Reforming Educational Reform: A Democratic Perspective

    Science.gov (United States)

    Green, J.

    2005-05-01

    This essay examines the status of educational reform in the United States as represented by the current Bush administration's program titled "No Child Left Behind" (NCLB). Employing the techniques of critical theory and logical analysis, contemporary reform efforts are compared with other, more progressive, educational reform movements in an effort to gain perspective and conceptual "traction" as it were, in differentiating such movements. Criteria are established for the assessment and evaluation of reform movements. These are employed in judging the efficacy of NCLB's aim, content, and methods, as well as the results of its program following four years of implementation. The merits of the centrality of standardized testing, pre-ordained curricular content, and exclusively didactic teaching methodologies are criticized, along with the extra-school societal forces which ordain these and determine their prominence in the NCLB program. The essentialism adopted by NCLB is, moreover, evaluated in the light of pragmatic, phenomenological, and postmodern educational theory. Arguing that the school is always and inevitably an instrument of societal forces, interests, and groups, it is contended that these not only be acknowledged, but that avenues be formalized for a thorough going and continuous educational "conversation," to borrow Rorty's term, for an amicable resolution of the issues of education's aim(s), content, and methods.

  2. Implications of energy reform on Mexican legislation for new and conventional energy technologies; Implicaciones de la reforma energetica sobre la legislacion mexicana con respecto a tecnologias energeticas nuevas y convencionales

    Energy Technology Data Exchange (ETDEWEB)

    Bautista Rodriguez, C. Moises; Tapia Pachuca, A. Belen [Alter Energias Grupo, Puebla (Mexico). E-mail: celso.bautista@thyssenkrupp.com; Gaytan Cruz, Veronica; Rivera Marquez, J. A.; Marin Torres, J. Lucina (Benemerita Universidad Autonoma de Puebla, Puebla (Mexico)

    2009-09-15

    The current economic-political conditions in the oil market are spurring on future alternative energy models worldwide, one of which is fuel batteries. This technology is foreseen to have several applications in portable and stationary services. Previous studies have reported on the slowness of Mexican legislation, compared to international legislation, on the collection and treatment of spent domestic batteries. Legislation on the issue is limited to a project for a Non-Mandatory Mexican Norm proposed since 2006, without having been implemented at the time the present document was written. In addition to the toxic environmental impact of the lack of regulation, it also represents a waste of energy, impacting the finances of users who throw away batteries with a significant residual energy charge (>60 %). This work analyzes recent Mexican energy reform to regulate the use of alternative technologies. Compared to international legislation, the basis of the Mexican legislation is unclear and incomplete, lacking technological consulting from governmental scientific institutions and clear, complete legislation adhering to international principles for the environment and society. These characteristics pose a risk to regulations and their application in Mexican society, and involve a loss in the benefits of applying clean technologies having better performance, a continued reflection of slow technological, economic, environmental and social advancement. [Spanish] En la actualidad, las condiciones economico-politicas en el mercado del petroleo estan permitiendo la busqueda de alternativas para el futuro modelo energetico mundial, una opcion es impulsar las pilas a combustible como una alternativa para el futuro energetico. Esta tecnologia preve tener multiples aplicaciones en servicios portatiles y estacionarios. En estudios previos se ha presentado el letargo de la legislacion mexicana con respecto a la legislacion internacional sobre el tema de recoleccion y tratamiento

  3. Variations of Low-energy Ion Distributions Measured in the Heliosheath

    International Nuclear Information System (INIS)

    Decker, R. B.; Roelof, E. C.; Hill, M. E.; Krimigis, S. M.

    2010-01-01

    This report is an update of low-energy ion intensities and angular distributions measured recently by the Low Energy Charged Particle instruments on the Voyager 1 and 2 spacecraft in the inner heliosheath.

  4. Optimizing the energy measurement of the ATLAS electromagnetic calorimeter

    International Nuclear Information System (INIS)

    Lampl, W.

    2005-12-01

    This PhD-thesis addresses the calibration of the ATLAS electromagnetic calorimeter. ATLAS is a high-energy physics experiment at the Large Hadron Collider (LHC) which is currently under construction at CERN in Geneva. LHC and ATLAS are foreseen to start up in 2007. In summer 2004, an extensive beam-test was carried out. This means that individual detector modules are exposed to a particle beam of known energy in order to verify the detector performance. At this occasion, all ATLAS subdetectors where operated together for the first time. The thesis contains a comprehensive description of the ATLAS electromagnetic calorimeter, the reconstruction software and the test-beam experiment that was carried out at CERN in 2004. Furthermore, the physics of the electromagnetic shower is discussed in detail. Data from the test beam as well as a detailed Monte-Carlo simulation are used to develop a novel energy-reconstruction method for the ATLAS EM calorimeter that achieves an excellent energy resolution (sampling term ∼ 11 %) as well as a very good linearity (< 0.4 %). Data taken during the beam test is also used to verify the accuracy of the simulation and to test the new energy-reconstruction method. (author)

  5. Measurement of excitation energy of neutron-rich precursor fragments

    Science.gov (United States)

    Mosby, Michelle Anthea

    Projectile fragmentation forms the basis for beam production at radioactive beam facilities such as the National Superconducting Cyclotron Laboratory (NSCL), yet uncertainties remain about the specifics of the production mechanism. For example, very little is known about the excitation energy of the precursors of the observed final fragments. In the present work, isotopes of sodium, neon, and fluorine produced in the fragmentation of a 32 Mg beam at 86 MeV/nucleon in a beryllium target, ranging in mass loss from DeltaA = 3--12, were observed and the coincident neutrons were detected using the Modular Neutron Array (MoNA). Neutron hit multiplicity in MoNA was compared to output from the statistical evaporation model PACE which was passed through a GEANT4 simulation to account for detector response with a X2v analysis. The neutron hit multiplicity distributions were used to determine the mass loss and excitation energy of the precursor fragments created in the fast step of the reaction. The mass loss and excitation energy were compared to abrasion/ablation models and an internuclear cascade model, ISABEL. For sodium and neon observed fragments, a single precursor mass was found, with a wide range of high excitation energies, up to 60 MeV. Observed fluorine isotopes were also found to have high excitation energies, ranging from 40--80 MeV, but with some variation in precursor mass.

  6. Rating PV Power and Energy: Cell, Module, and System Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Emery, Keith

    2016-06-02

    A summary of key points related to research-level measurements of current vs. voltage measurement theory including basic PV operation, equivalent circuit, and concept of spectral error; PV power performance including PV irradiance sensors, simulators and commercial and generic I-V systems; PV measurement artifacts, intercomparisons, and alternative rating methods.

  7. Measures for sustainable energy in the livestock farming industry; Maatregelen duurzame energie veehouderijsector

    Energy Technology Data Exchange (ETDEWEB)

    Schellekens, J. [DLV Bouw Milieu en Techniek, Uden (Netherlands)

    2010-07-15

    The sectors of pig farming, poultry farming and veal farming have been examined for sustainable energy deployment options in agricultural businesses. These are systems are ready for practice and to be used by individual businesses. Background information is provided on energy saving, deployment of photovoltaic energy, solar collectors, biomass incineration, heat pumps, air conditioning with ground water, and practical experiences in the deployment of sustainable energy systems. Moreover, an overview is given of subsidies and fiscal opportunities for sustainable energy deployment by agricultural businesses [Dutch] Voor de sectoren varkenshouderij, pluimveehouderij en vleeskalverhouderij is onderzocht wat de toepassingsmogelijkheden zijn van duurzame energie (DE) op agrarische bedrijven. Het betreft systemen welke praktijkrijp zijn en te gebruiken op individuele bedrijven. Er wordt achtergrondinformatie gegeven over energiebesparing, toepassen van photovoltaische energie, zonnecollectoren, verbranden van biomassa, warmtepompen, luchtconditionering met grondwater, praktijkervaringen in de toepassing van duurzame energiesystemen. Ook wordt een overzicht geven van subsidies en fiscale mogelijkheden voor toepassen van DE-systemen op agrarische bedrijven.

  8. Do stochastic inhomogeneities affect dark-energy precision measurements?

    CERN Document Server

    Ben-Dayan, Ido; Marozzi, Giovanni; Nugier, Fabien; Veneziano, Gabriele

    2013-01-01

    The effect of a stochastic background of cosmological perturbations on the luminosity-redshift relation is computed to second order through a recently proposed covariant and gauge-invariant light-cone averaging procedure. The resulting expressions are free from both ultraviolet and infrared divergences, implying that such perturbations cannot mimic a sizable fraction of dark energy. Different averages are estimated and depend on the particular function of the luminosity distance being averaged. The energy flux, being minimally affected by perturbations at large z, is proposed as the best choice for precision estimates of dark-energy parameters. Nonetheless, its irreducible (stochastic) variance induces statistical errors on \\Omega_{\\Lambda}(z) typically lying in the few-percent range.

  9. Do stochastic inhomogeneities affect dark-energy precision measurements?

    Science.gov (United States)

    Ben-Dayan, I; Gasperini, M; Marozzi, G; Nugier, F; Veneziano, G

    2013-01-11

    The effect of a stochastic background of cosmological perturbations on the luminosity-redshift relation is computed to second order through a recently proposed covariant and gauge-invariant light-cone averaging procedure. The resulting expressions are free from both ultraviolet and infrared divergences, implying that such perturbations cannot mimic a sizable fraction of dark energy. Different averages are estimated and depend on the particular function of the luminosity distance being averaged. The energy flux being minimally affected by perturbations at large z is proposed as the best choice for precision estimates of dark-energy parameters. Nonetheless, its irreducible (stochastic) variance induces statistical errors on Ω(Λ)(z) typically lying in the few-percent range.

  10. Measuring energy efficiency under heterogeneous technologies using a latent class stochastic frontier approach: An application to Chinese energy economy

    International Nuclear Information System (INIS)

    Lin, Boqiang; Du, Kerui

    2014-01-01

    The importance of technology heterogeneity in estimating economy-wide energy efficiency has been emphasized by recent literature. Some studies use the metafrontier analysis approach to estimate energy efficiency. However, for such studies, some reliable priori information is needed to divide the sample observations properly, which causes a difficulty in unbiased estimation of energy efficiency. Moreover, separately estimating group-specific frontiers might lose some common information across different groups. In order to overcome these weaknesses, this paper introduces a latent class stochastic frontier approach to measure energy efficiency under heterogeneous technologies. An application of the proposed model to Chinese energy economy is presented. Results show that the overall energy efficiency of China's provinces is not high, with an average score of 0.632 during the period from 1997 to 2010. - Highlights: • We introduce a latent class stochastic frontier approach to measure energy efficiency. • Ignoring technological heterogeneity would cause biased estimates of energy efficiency. • An application of the proposed model to Chinese energy economy is presented. • There is still a long way for China to develop an energy efficient regime

  11. Energy efficiency policies and measures in Norway 2006. Monitoring of energy efficiency in EU15 and Norway (Odyssee-Mure)

    International Nuclear Information System (INIS)

    Rosenberg, Eva; Espegren, Kari Aamodt

    2006-12-01

    This report represents the national case study of Norway for the EIE-project 'Monitoring of energy efficiency in EU-15 and Norway - ODYSSEE-MURE'. It presents the recent energy efficiency trends in Norway on the basis of indicators extracted from the ODYSSEE database. Total energy consumption (not including energy as feedstock) has increased from 192 TWh in 1990 to a present maximum of 219 TWh in 1999. From then it has been a slight decrease and in 2005 the final energy consumption was 215 TWh. Energy consumption in manufacturing industry has increased by 11 percent from 1990 to 2004, and in the period 1998-2004 it seems to be steadying at approximately 78 TWh. Final energy use in households has increased from 41 TWh in 1990 to a maximum of 46.6 TWh in 1996 and 2002. In 2005 44.1 TWh was used, which is almost the same as the consumption in 1994. It seems to be an interrupt in the increase of energy use in households, despite the growth of all common used drivers in this sector. Energy efficiency policies and measures implemented since 1990 have contributed to improve the efficiency by 10 percent, or 0.7 percent per year; this means that if these policies and measures would not have been implemented, the final energy consumption would have been 10 percent higher in 2004 (or approximately 19 TWh) (author) (ml)

  12. Numerical simulation of energy efficiency measures: control and operational strategies

    International Nuclear Information System (INIS)

    Ardehali, M. M.

    2006-01-01

    The inherent limitation in performance of building envelop components and heating ventilating and air conditioning (HVAC) equipment necessitates the examination of operational strategies for improvement in energy-efficient operation of buildings. Due to the ease of installation and increasing availability of electronic controllers, operational strategies that could be programmed are of particular interest. The Iowa Energy Center in the US has taken the initiative to conduct the necessary assessment of current HVAC technology and the commonly-used operational strategies for commercial and industrial buildings, as applied to the midwestern part of the country, with weather and energy cost data for Des Moines, Iowa. The first part of this study focused on the energy consumption and cost effectiveness of HVAC systems. The objectives of the second part is concerned with examination of various operational strategies, namely, night purge (NP), fan optimum start and stop (OSS), condenser water reset (CWR), and chilled water reset (CHWR) applied to order and newer-type commercial office buildings. The indoor air quality requirement are met and the latest applicable energy rates from local utility companies are used. The results show that, in general, NP is not an effective strategy in buildings with low thermal mass storage, OSS reduced fan energy, and CWR and CHWR could be effective and require chillers with multi-stage unloading characteristics. The most operationally efficient strategies are the combination of OSS, CWR, and CHWR for the older-type building, and OSS for the newer-type building. Economically, the most effective is the OSS strategy for the older-type building and the CHWR strategy for the newer-type building.(Author)

  13. Liberalising energy markets: Cost management using measurement data

    International Nuclear Information System (INIS)

    Girsberger, H.

    2000-01-01

    This article looks at the various factors involved in assuring good cost management and customer relations in the liberalised energy market such as price levels, additional services and added value for the customer. The additional information required by the utilities to be able to implement such customer-oriented strategies is considered and ways of collecting and processing the data on energy consumption, customer profiles and trends are described. The further analysis of the data and the compilation of reports for management, marketing, engineering and quality assurance departments are discussed, as are the information technology and equipment interfaces required to do this

  14. On the measurement of the surface energy budget over a land ...

    Indian Academy of Sciences (India)

    The measurement of surface energy balance over a land surface in an open area in Bangalore is reported. Measurements of all variables needed to calculate the surface energy balance on time scales longer than a week are made. Components of radiative fluxes are measured while sensible and latent heat fluxes are ...

  15. Energy and frequency measurements on the Twente Raman free-electron laser

    NARCIS (Netherlands)

    van der Slot, Petrus J.M.; Witteman, W.J.

    1993-01-01

    Results of energy and frequency measurements on the Twente Raman FEL are presented and discussed. A highest energy of 230 mJ was measured using a joule meter. The spectrum was determined using waveguide cutoff filters. These measurements generally showed a broad spectrum containing two or more

  16. Catalytic reforming methods

    Science.gov (United States)

    Tadd, Andrew R; Schwank, Johannes

    2013-05-14

    A catalytic reforming method is disclosed herein. The method includes sequentially supplying a plurality of feedstocks of variable compositions to a reformer. The method further includes adding a respective predetermined co-reactant to each of the plurality of feedstocks to obtain a substantially constant output from the reformer for the plurality of feedstocks. The respective predetermined co-reactant is based on a C/H/O atomic composition for a respective one of the plurality of feedstocks and a predetermined C/H/O atomic composition for the substantially constant output.

  17. Fast and Precise Beam Energy Measurement using Compton Backscattering at e+e- Colliders

    CERN Document Server

    Kaminskiy, V V; Muchnoi, N Yu; Zhilich, V N

    2017-01-01

    The report describes a method for a fast and precise beam energy measurement in the beam energy range 0.5-2 GeV and its application at various e+e- colliders. Low-energy laser photons interact head-on with the electron or positron beam and produce Compton backscattered photons whose energy is precisely measured by HPGe detector. The method allows measuring the beam energy with relative accuracy of ∼2-5.10-5. The method was successfully applied at VEPP-4M, VEPP-3, VEPP-2000 (BINP, Russia) and BEPC-II (IHEP, China).

  18. High temperature nuclear heat for isothermal reformer

    International Nuclear Information System (INIS)

    Epstein, M.

    2000-01-01

    High temperature nuclear heat can be used to operate a reformer with various feedstock materials. The product synthesis gas can be used not only as a source for hydrogen and as a feedstock for many essential chemical industries, such as ammonia and other products, but also for methanol and synthetic fuels. It can also be burnt directly in a combustion chamber of a gas turbine in an efficient combined cycle and generate electricity. In addition, it can be used as fuel for fuel cells. The reforming reaction is endothermic and the contribution of the nuclear energy to the calorific value of the final product (synthesis gas) is about 25%, compared to the calorific value of the feedstock reactants. If the feedstock is from fossil origin, the nuclear energy contributes to a substantial reduction in CO 2 emission to the atmosphere. The catalytic steam reforming of natural gas is the most common process. However, other feedstock materials, such as biogas, landfill gas and CO 2 -contaminated natural gas, can be reformed as well, either directly or with the addition of steam. The industrial steam reformers are generally fixed bed reactors, and their performance is strongly affected by the heat transfer from the furnace to the catalyst tubes. In top-fired as well as side-fired industrial configurations of steam reformers, the radiation is the main mechanism of heat transfer and convection heat transfer is negligible. The flames and the furnace gas constitute the main sources of the heat. In the nuclear reformers developed primarily in Germany, in connection with the EVA-ADAM project (closed cycle), the nuclear heat is transferred from the nuclear reactor coolant gas by convection, using a heating jacket around the reformer tubes. In this presentation it is proposed that the helium in a secondary loop, used to cool the nuclear reactor, will be employed to evaporate intermediate medium, such as sodium, zinc and aluminum chloride. Then, the vapors of the medium material transfer

  19. Alternatives to the EEG levy. Possible effects of a reform of the energy transition financing on the industry; Alternativen zur EEG-Umlage. Moegliche Auswirkungen einer Reform der Energiewende-Finanzierung auf die Industrie

    Energy Technology Data Exchange (ETDEWEB)

    Scheyhing, Joerg [ECG Energie Consulting GmbH, Kehl (Germany)

    2017-07-15

    Although it has been adjusted six times since the year 2000, it has not yet been possible to manage the unrestricted growth of the EEG levy. In the 2017 election year, it becomes therefore ever more obvious that an alternative way to finance the energy transition is high on the political agenda. This would lead to significant changes for energy-intensive companies, regardless of whether they have benefited from a release from the levy or not. At the same time, the alternatives currently discussed have quite different effects on the industrial companies concerned and thereby the industry location Germany. [German] Obwohl seit dem Jahr 2000 inzwischen sechsmal angepasst, ist es bisher nicht gelungen, den ungebremsten Anstieg der EEG-Umlage in den Griff zu bekommen. Im Wahljahr 2017 wird deshalb immer offensichtlicher, dass ein alternativer Weg zur Finanzierung der Energiewende weit oben auf der politischen Tagesordnung steht. Damit kaemen auf die energieintensiven Unternehmen signifikante Veraenderungen zu, und zwar unabhaengig davon, ob sie bisher von einer Befreiung von der Umlage profitiert haben oder nicht. Dabei haben die derzeit diskutierten Alternativen durchaus unterschiedliche Auswirkungen auf die betroffenen Industrieunternehmen und damit den Wirtschaftsstandort Deutschland.

  20. Act of 5 August 1958 relating to economic and budgetary reforms

    International Nuclear Information System (INIS)

    1978-01-01

    This Act provides for economic and budgetary reforms in he energy sector, including the nuclear fuel cycle to establish an electricity policy integrated within the overall energy policy, and a more balanced distribution of electricity production between public and private enterprises. To this effect, the Act lays down that the King may by order institute reforms in national organisations, inter alia, the National Energy Committee, henceforth placed under the authority of the Minister of Economic Affairs, and the Committee for the Control of Gas and Electricity which includes representatives of social-economic groups. It also makes provision for the creation of a company, jointly owned by the Government and industry, to be responsible for the management of the nuclear fuel cycle. Finally, a number of economic and budgetary measures are foreseen in implementation of the Act. (NEA) [fr

  1. Efficient energy management measures in steel industry for economic utilization

    Directory of Open Access Journals (Sweden)

    Gurinderbir Singh Grewal

    2016-11-01

    Full Text Available The application of energy efficient Induction Machines (IM is explained in reference to power consumption savings. In energy efficient IM, losses for various Horse Power (HP ratings are summarized for bringing effective changes in design. Emphasis is laid on how load factor, speed & power quality affect machine’s efficiency. Replacement of conventional IM of higher power rating is done with required energy efficient Doubly Fed Induction Machine (DFIM to enhance the performance at variable speeds near rated power outputs. Results of the proposed approach will give substantial savings in energy & loss reduction. The field data of Jindal Steel Rolling Mill (JSRM at Hisar, Haryana (India is taken into consideration. This paper proposes a non-intrusive air gap torque method for efficiency estimation of in-service IMs. This approach gives results considering stray-load and friction-windage loss according to IEC standard and IEEE112-B standard. The proposed method is validated experimentally whose effectiveness is witnessed using MATLAB/SIMULINK.

  2. Measurements of VBS (and other diboson processes at high energy)

    CERN Document Server

    Li, Bing; The ATLAS collaboration

    2018-01-01

    The talk gives a broad overview of the progress in the VBS analyses and the projected improvements for both ATLAS and CMS for the HL-LHC program, with luminosity of 3000 fb-1 at center-of-mass energy at 14 TeV.

  3. Measurement of acoustic emission signal energy. Calibration and tests

    International Nuclear Information System (INIS)

    Chretien, N.; Bernard, P.; Fayolle, J.

    1975-01-01

    The possibility of using an Audimat W device for analyzing the electric energy of signals delivered by a piezo-electric sensor for acoustic emission was investigated. The characteristics of the prototype device could be improved. The tests performed revealed that the 7075-T651 aluminium alloy can be used as a reference material [fr

  4. Measuring and controlling unfairness in decentralized planning of energy demand

    NARCIS (Netherlands)

    Pournaras, E.; Vasirani, M.; Kooij, R.E.; Aberer, K.

    2014-01-01

    Demand-side energy management improves robustness and efficiency in Smart Grids. Load-adjustment and load-shifting are performed to match demand to available supply. These operations come at a discomfort cost for consumers as their lifestyle is influenced when they adjust or shift in time their

  5. Direct measurement of exciton dissociation energy in polymers

    Czech Academy of Sciences Publication Activity Database

    Toušek, J.; Toušková, J.; Chomutová, R.; Paruzel, Bartosz; Pfleger, Jiří

    2017-01-01

    Roč. 7, č. 1 (2017), s. 1-6, č. článku 015113. ISSN 2158-3226 Institutional support: RVO:61389013 Keywords : exciton dissociation energy * polymers * SCR Subject RIV: CD - Macromolecular Chemistry OBOR OECD: Polymer science Impact factor: 1.568, year: 2016

  6. Measuring scientific research in emerging nano-energy field

    Science.gov (United States)

    Guan, Jiancheng; Liu, Na

    2014-04-01

    The purpose of this paper is to comprehensively explore scientific research profiles in the field of emerging nano-energy during 1991-2012 based on bibliometrics and social network analysis. We investigate the growth pattern of research output, and then carry out across countries/regions comparisons on research performances. Furthermore, we examine scientific collaboration across countries/regions by analyzing collaborative intensity and networks in 3- to 4-year intervals. Results indicate with an impressively exponential growth pattern of nano-energy articles, the world share of scientific "giants," such as the USA, Germany, England, France and Japan, display decreasing research trends, especially in the USA. Emerging economies, including China, South Korea and India, exhibit a rise in terms of the world share, illustrating strong development momentum of these countries in nano-energy research. Strikingly, China displays a remarkable rise in scientific influence rivaling Germany, Japan, France, and England in the last few years. Finally, the scientific collaborative network in nano-energy research has expanded steadily. Although the USA and several major European countries play significantly roles on scientific collaboration, China and South Korea exert great influence on scientific collaboration in recent years. The findings imply that emerging economies can earn competitive advantages in some emerging fields by properly engaging a catch-up strategy.

  7. Proceedings of the Department of Energy workshop on beta measurements

    Energy Technology Data Exchange (ETDEWEB)

    Swinth, K.L.; Vallario, E.J.

    1987-09-01

    Participants discussed current practices, efforts to upgrade the quality of beta measurements, and initiatives necessary to improve the measurement and control of beta doses. This proceedings includes papers presented at the workshop, transcripts of panel and open discussions, and documentation of question and answer sessions. The information exchange resulting from this meeting is expected to provide a clearer focus on the problems of beta measurements.

  8. Proceedings of the Department of Energy workshop on beta measurements

    International Nuclear Information System (INIS)

    Swinth, K.L.; Vallario, E.J.

    1987-09-01

    Participants discussed current practices, efforts to upgrade the quality of beta measurements, and initiatives necessary to improve the measurement and control of beta doses. This proceedings includes papers presented at the workshop, transcripts of panel and open discussions, and documentation of question and answer sessions. The information exchange resulting from this meeting is expected to provide a clearer focus on the problems of beta measurements

  9. Factors which influence Nova Scotia farmers in implementing energy efficiency and renewable energy measures

    International Nuclear Information System (INIS)

    Bailey, J.A.; Gordon, R.; Burton, D.; Yiridoe, E.K.

    2008-01-01

    Improvements in energy efficiency and renewable energy use can reduce farm operating costs and reduce greenhouse gas (GHG) emissions. Responses (n=224, representing a 32% response rate) from a mail survey were used to assess use and interest in energy efficient and renewable energy options on farms in Nova Scotia, Canada. Energy efficiency options used the most were behavior, insulation, and lighting. Few farms used renewable energy options. Approximately 78% of farmers indicated an interest in implementing energy efficiency and renewable energy options. Interest varied by farm type and size. Interest increased with farm size. The two main efficiency options of interest were lighting (60.8%) and insulation (43.7%), while wind power development (55.5%) and solar water heating (24.5%) were the main renewable options of interest. Farmers concerned about power and equipment reliability were less likely to be interested in implementing options. Farmers concerned about the environment were more likely to be interested in implementing options. Current use of certain energy efficiency technologies, such as efficient lighting, influenced implementation interest

  10. On the use of Lineal Energy Measurements to Estimate Linear Energy Transfer Spectra

    Science.gov (United States)

    Adams, David A.; Howell, Leonard W., Jr.; Adam, James H., Jr.

    2007-01-01

    This paper examines the error resulting from using a lineal energy spectrum to represent a linear energy transfer spectrum for applications in the space radiation environment. Lineal energy and linear energy transfer spectra are compared in three diverse but typical space radiation environments. Different detector geometries are also studied to determine how they affect the error. LET spectra are typically used to compute dose equivalent for radiation hazard estimation and single event effect rates to estimate radiation effects on electronics. The errors in the estimations of dose equivalent and single event rates that result from substituting lineal energy spectra for linear energy spectra are examined. It is found that this substitution has little effect on dose equivalent estimates in interplanetary quiet-time environment regardless of detector shape. The substitution has more of an effect when the environment is dominated by solar energetic particles or trapped radiation, but even then the errors are minor especially if a spherical detector is used. For single event estimation, the effect of the substitution can be large if the threshold for the single event effect is near where the linear energy spectrum drops suddenly. It is judged that single event rate estimates made from lineal energy spectra are unreliable and the use of lineal energy spectra for single event rate estimation should be avoided.

  11. Non-catalytic recuperative reformer

    Science.gov (United States)

    Khinkis, Mark J.; Kozlov, Aleksandr P.; Kurek, Harry

    2015-12-22

    A non-catalytic recuperative reformer has a flue gas flow path for conducting hot flue gas from a thermal process and a reforming mixture flow path for conducting a reforming mixture. At least a portion of the reforming mixture flow path is embedded in the flue gas flow path to permit heat transfer from the hot flue gas to the reforming mixture. The reforming mixture flow path contains substantially no material commonly used as a catalyst for reforming hydrocarbon fuel (e.g., nickel oxide, platinum group elements or rhenium), but instead the reforming mixture is reformed into a higher calorific fuel via reactions due to the heat transfer and residence time. In a preferred embodiment, extended surfaces of metal material such as stainless steel or metal alloy that are high in nickel content are included within at least a portion of the reforming mixture flow path.

  12. Beam Energy Measurement by Resonant Depolarization Method at VEPP-4M

    CERN Document Server

    Blinov, V E; Kaminskiy, V V; Kudryavtsev, V N; Nikitin, S A; Nikolaev, I B; Shekhtman, L I

    2017-01-01

    Experiments on high precision mass measurement of particles require precise beam energy calibration. The most accurate method of beam energy measurement is the resonant depolarization technique. This article describes the beam energy measurement at the VEPP-4M storage ring using this method together with a Touschek polarimeter. The accuracy achieved is about 10−6. More than thousand energy calibrations were used in the KEDR detector for the precise experiments on the measurement of J/ψ, ψ(2S), ψ(3770), D+, D0 meson and τ lepton masses.

  13. Local Measurement of Fuel Energy Deposition and Heat Transfer Environment During Fuel Lifetime Using Controlled Calorimetry

    International Nuclear Information System (INIS)

    Don W. Miller; Andrew Kauffmann; Eric Kreidler; Dongxu Li; Hanying Liu; Daniel Mills; Thomas D. Radcliff; Joseph Talnagi

    2001-01-01

    A comprehensive description of the accomplishments of the DOE grant titled, ''Local Measurement of Fuel Energy Deposition and Heat Transfer Environment During Fuel Lifetime using Controlled Calorimetry''

  14. What measurable zero point fluctuations can(not) tell us about dark energy

    Energy Technology Data Exchange (ETDEWEB)

    Doran, M. [Heidelberg Univ. (Germany). Inst. fuer Theoretische Physik; Jaeckel, J. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2006-05-15

    We show that laboratory experiments cannot measure the absolute value of dark energy. All known experiments rely on electromagnetic interactions. They are thus insensitive to particles and fields that interact only weakly with ordinary matter. In addition, Josephson junction experiments only measure differences in vacuum energy similar to Casimir force measurements. Gravity, however, couples to the absolute value. Finally we note that Casimir force measurements have tested zero point fluctuations up to energies of {proportional_to} 10 eV, well above the dark energy scale of {proportional_to} 0.01 eV. Hence, the proposed cut-off in the fluctuation spectrum is ruled out experimentally. (Orig.)

  15. Do the Czech Production Plants Measure the Performance of Energy Processes?

    Directory of Open Access Journals (Sweden)

    Zuzana Tučková

    2016-04-01

    Full Text Available The research was focused to the actual situation in Performance Measurement of the energy processes in Czech production plants. The results are back – upped by the previous researches which were aimed to performance measurement methods usage in the whole organizational structure of the plants. Although the most of big industrial companies declared using of modern Performance Measurements methods, the previous researches shown that it is not purely true. The bigger differences were found in the energy area – energy processes. The authors compared the Energy concepts of European Union (EU and Czech Republic (CZ which are very different and do not create any possibilities for manager’s clear decision in the process management strategy of energy processes in their companies. Next step included the Energy department’s analysis. The significant part of energy processes in the production plants is still not mapped, described and summarized to one methodical manual for managing and performance measurement.

  16. FORMATION OF INVESTMEN POTENTIAL FOR ENERGY CONSERVATION MEASURES IN THE SOCIAL SPHERE OF UKRAINE

    Directory of Open Access Journals (Sweden)

    Nataliia Stavnycha

    2017-03-01

    Full Text Available The article is devoted to searching for sources of investment for measures of energy supply in the social sphere. The aim of the article is to determine possible resources for their attraction to energy conservation measures in budgetary institutions of the country. To achieve this next methods were used: theoretical generalization, abstract logical analysis, comparison. The results of the research are: isolating of problems in terms of energy efficiency, which take place in budgetary institutions; measures to implement the potential of energy conservation; search sources of investment were proposed. Scientific novelty identify tools that can be sources of investment. The practical significance of the results is that the proposed investment sources can be used in practice by the heads of budgetary institutions in the implementation of energy conservation measures. Key words: budget sphere, energy efficiency, energy conservation, рerformance contracts, grants.

  17. Medium Energy measurements on N-N parameters

    International Nuclear Information System (INIS)

    Ambrose, D.; Bachman, M.; Coffey, P.; Glass, G.; Jobst, B.; McNaughton, K.H.; Nguyen, C.; Riley, P.J.

    1992-12-01

    Research is reported on the following topics: Spin transfer measurements in np elastic scattering; pp elastic differential cross section measurements; single pion production in np scattering; and a new search for rare kaon decays (K L →μμ and K L →ee). 68 refs., 33 figs, 3 tabs

  18. Evaluating airline energy efficiency: An integrated approach with Network Epsilon-based Measure and Network Slacks-based Measure

    International Nuclear Information System (INIS)

    Xu, Xin; Cui, Qiang

    2017-01-01

    This paper focuses on evaluating airline energy efficiency, which is firstly divided into four stages: Operations Stage, Fleet Maintenance Stage, Services Stage and Sales Stage. The new four-stage network structure of airline energy efficiency is a modification of existing models. A new approach, integrated with Network Epsilon-based Measure and Network Slacks-based Measure, is applied to assess the overall energy efficiency and divisional efficiency of 19 international airlines from 2008 to 2014. The influencing factors of airline energy efficiency are analyzed through the regression analysis. The results indicate the followings: 1. The integrated model can identify the benchmarking airlines in the overall system and stages. 2. Most airlines' energy efficiencies keep steady during the period, except for some sharply fluctuations. The efficiency decreases mainly centralized in the year 2008–2011, affected by the financial crisis in the USA. 3. The average age of fleet is positively correlated with the overall energy efficiency, and each divisional efficiency has different significant influencing factors. - Highlights: • An integrated approach with Network Epsilon-based Measure and Network Slacks-based Measure is developed. • 19 airlines' energy efficiencies are evaluated. • Garuda Indonesia has the highest overall energy efficiency.

  19. Measurement of adhesion properties between topcoat paint and metallized/galvanized steel with surface energy measurement equipment.

    Science.gov (United States)

    2013-09-01

    The objectives of this research project are: (1) Compare the adhesion properties of NEPCOAT-approved topcoat paint over : metallized or galvanized steel. Use surface-energy measuring technique to characterize the wetting properties of the liqui...

  20. Measuring energy conservation on Nova Scotia (NS) farms: A 2004 to 2011 comparison

    International Nuclear Information System (INIS)

    Bailey, J.A.; Duinker, P.; Amyotte, P.; Adams, M.; Khan, F.

    2016-01-01

    Many jurisdictions, including Nova Scotia (NS), have implemented policies and programs around energy. The NS government has targeted energy efficiency and more renewable energy as two main policy areas. The NS Department of Agriculture has taken initiative to provide support to implement energy conservation, energy efficiency and renewable energy opportunities in recent years but have these programs and policies been effective? A baseline energy use survey was conducted in 2005 and responses from mail surveys in 2012 (n = 273, 11.4% response rate) were used to measure the change in NS farm energy use data reported for 2004 and 2011. There have been significant reductions in energy use on NS farms. On average, NS farmers spent $8790 on energy expenses in 2011 compared to $11,228 in 2004. Adjusting for inflation, this is a 32% decrease, despite energy commodity pricing increases beyond the inflation rate. This is likely due to a decrease in energy use and a shift from gasoline use to diesel use. By the end of 2012, 36.0% of NS farmers (more than 860) had received some level of support to evaluate their energy options. This includes 410 energy audits compared to only 36 by the end of 2005. - Highlights: • Nova Scotia farmers decreased their energy costs by 32% between 2004 and 2011. • Energy reductions were likely due to decreased energy use and a shift in fuel use. • An estimated 374 NS farms had an energy audit between 2005 and 2012.

  1. A fast gauge for energy flux density measurement

    Science.gov (United States)

    Garcia, Jorge; Bana de Schor, Beatriz

    1990-01-01

    Herein, the design and characterization of a fast energy flux density gauge are described. The gauge is based on a thermoelectrical pair with the junction made of a thin layer of silver. High absorptivity is attained by an electrolytic deposit of platinum black on the silver coat. Dynamic calibration gives a response time below 100 microsec. Computer methods to obtain the energy flux density from temperature-time history were evaluated. The results of the tests performed with igniters of pelleted boron/potassium nitrate and black powder, used in solid propellant ignition, are shown. The gauge developed can be applied to fast processes which require small response time. The gauge does not need previous calibration, it is resistant to vibrations and accelerations, and, at the same time, it is small in size, economical, and easy to build.

  2. Evaluation of the Measured Energy Performance of Four Solar Systems.

    Science.gov (United States)

    1984-09-01

    exception occurred because a building occupant manually operated the system. Although the manual operacion of this one system prevented damage to the solar...Specification 13985, Solar Equipment and the Army Technical Manual 5-804-2, Solar Energy Systems. -....... .. . .. . 2 DESCRIPTION OF THE SOLAR...standard built-up roof. *Metric Conversion Table is on p 81. 3C. Knapp, T. Stoffel, and S. Whitaker, Insolation Data Manual , SERI/SP-755- 789 (Solar

  3. Energy dependence of air fluorescence yield measured by AIRFLY

    Czech Academy of Sciences Publication Activity Database

    Ave, M.; Boháčová, Martina; Buonomo, B.; Hrabovský, Miroslav; Nožka, Libor; Palatka, Miroslav; Řídký, Jan; Schovánek, Petr

    2008-01-01

    Roč. 597, č. 1 (2008), 46-49 ISSN 0168-9002 R&D Projects: GA MŠk LC527; GA MŠk(CZ) LA08016; GA MŠk(CZ) 1M06002 Institutional research plan: CEZ:AV0Z10100502; CEZ:AV0Z10100522 Keywords : air fluorescence * cosmic rays Subject RIV: BF - Elementary Particles and High Energy Physics Impact factor: 1.019, year: 2008

  4. Social Security Reform

    National Research Council Canada - National Science Library

    Nuschler, Dawn

    2005-01-01

    .... In recent years, reform ideas have ranged from relatively minor changes to the current pay-as-you-go social insurance system to a redesigned program based on personal savings and investments modeled after IRAs and 401(k...

  5. Publicity as an Instrument of Reform.

    Science.gov (United States)

    Caudill, Susan

    Albert Einstein and the Emergency Committee of Atomic Scientists (ECAS) conducted a reform-based public communication campaign for the international control of atomic energy after the Second World War. The Committee raised funds and sought publicity for its proposed solution to the problem of war and the management of peace. Its solution was the…

  6. Reformer Fuel Injector

    Science.gov (United States)

    Suder, Jennifer L.

    2004-01-01

    Today's form of jet engine power comes from what is called a gas turbine engine. This engine is on average 14% efficient and emits great quantities of green house gas carbon dioxide and air pollutants, Le. nitrogen oxides and sulfur oxides. The alternate method being researched involves a reformer and a solid oxide fuel cell (SOFC). Reformers are becoming a popular area of research within the industry scale. NASA Glenn Research Center's approach is based on modifying the large aspects of industry reforming processes into a smaller jet fuel reformer. This process must not only be scaled down in size, but also decrease in weight and increase in efficiency. In comparison to today's method, the Jet A fuel reformer will be more efficient as well as reduce the amount of air pollutants discharged. The intent is to develop a 10kW process that can be used to satisfy the needs of commercial jet engines. Presently, commercial jets use Jet-A fuel, which is a kerosene based hydrocarbon fuel. Hydrocarbon fuels cannot be directly fed into a SOFC for the reason that the high temperature causes it to decompose into solid carbon and Hz. A reforming process converts fuel into hydrogen and supplies it to a fuel cell for power, as well as eliminating sulfur compounds. The SOFC produces electricity by converting H2 and CO2. The reformer contains a catalyst which is used to speed up the reaction rate and overall conversion. An outside company will perform a catalyst screening with our baseline Jet-A fuel to determine the most durable catalyst for this application. Our project team is focusing on the overall research of the reforming process. Eventually we will do a component evaluation on the different reformer designs and catalysts. The current status of the project is the completion of buildup in the test rig and check outs on all equipment and electronic signals to our data system. The objective is to test various reformer designs and catalysts in our test rig to determine the most

  7. Energy Flow Objects and Usage of Tracks for Energy Measurement in CMS

    CERN Document Server

    Green, Dan; Kunori, Shuichi; Nikitenko, Alexander; Vardanian, I N; Virdee, Tejinder

    2002-01-01

    We present an algorithm to determine the energy of jets using the CMS calorimeter and tracker. The results on dijet mass reconstruction for a hypothetical Z'(M=120 GeV)->jj are presented. Improvement in Z'mass resolution when the energy flow objects are used is found to be about of 22 % in comparison with the usage of the calorimeter information only. We present also a method to improve jet energy resolution with regional use of tracks when a jet is found first with a ''standard'' jet finder running on calorimeter towers as an input. We factorize the improvement in the jet energy resolution due to addition of tracks swept out of the reconstruction cone in 4T magnetic field, and due to replacement inside cone of the cluster energy by the matched track momentum or (for bad matching) subtraction from the jet energy the expected response of the track in the calorimeter and adding to the jet energy the track momentum. It is shown that for the soft jets of ~ 30-40 GeV the energy resolution may be improved by...

  8. The Danish school reform

    DEFF Research Database (Denmark)

    Bager, Ann; Mølholm, Martin; Horsbøl, Anders

    The paper presents a methodological framework for the study of the discursive emergence of the recent Danish School reform (2014). The framework will enable discourse scholars to hold an actively involved position in changing and furthering plurivocal processes of translations, negotiations...... and implementation of the reform. The framework is operationalized through research-based participatory collaborative processes involving local actors in two Danish public schools. It interlinks diverse discourse strategies and perceptive distances that traditionally belong to separate branches within discourse...

  9. Earth formation porosity log using measurement of neutron energy spectrum

    International Nuclear Information System (INIS)

    1981-01-01

    Methods and apparatus are described for measuring the porosity of subsurface earth formations in the vicinity of a well borehole by means of neutron well logging techniques. All the commercial techniques for measuring porosity currently available are not as accurate as desirable due to variations in the borehole wall diameter, in the borehole fluids (e.g. with chlorine content) in the casings of the borehole etc. This invention seeks to improve accuracy by using a measurement of the epithermal neutron population at one detector and the fast neutron population at a second detector, spaced approximately the same distance from a neutron source. The latter can be detected either by a fast neutron detector or indirectly by an inelastic gamma ray detector. Background correction can be made, and special detectors used, to discriminate against the detection of thermal neutrons or their resultant capture gamma rays. These fluctuations affect the measurement of thermal neutron populations. (U.K.)

  10. Measurements of energy losses, distributions of energy loss and additivity of energy losses for 50 to 150 keV protons in hydrogen and nine hydrocarbon gases

    International Nuclear Information System (INIS)

    Thorngate, J.H.

    1976-05-01

    Measurements of energy-loss distributions were made for 51, 102, and 153 keV protons traversing hydrogen, methane, ethyne (acetylene), ethene (ethylene), ethane, propyne (methyl acetylene), propadiene (allene), propene (propylene), cyclopropane and propane. The objectives were to test the theories of energy-loss distribution in this energy range and to see if the type of carbon bonding in a hydrocarbon molecule affects the shape of the distribution. Stopping powers and stopping cross sections were also measured at these energies and at 76.5 and 127.5 keV to determine effects of chemical binding. All of the measurements were made at the gas density required to give a 4 percent energy loss. The mean energy, second central moment (a measure of the width of the distribution), and the third central moment (a measure of the skew) were calculated from the measured energy-loss distributions. Stopping power values, calculated using the mean energy, compared reasonably well with those calculated from the Bethe stopping power theory. For the second and third central moments, the best agreement between measurement and theory was when the classical scattering probability was used for the calculations, but even these did not agree well. In all cases, variations were found in the data that could be correlated to the type of carbon binding in the molecule. The differences were statistically significant at a 99 percent confidence interval for the stopping powers and second central moments measured with 51 keV protons. Similar trends were noted at other energies and for the third central moment, but the differences were not statistically significant at the 99 percent confidence interval

  11. The challenge to UK energy policy: An ageing population perspective on energy saving measures and consumption

    Energy Technology Data Exchange (ETDEWEB)

    Hamza, Neveen, E-mail: n.hamza@ncl.ac.u [School of Architecture, Planning and Landscape Newcastle University, NE1 7RU (United Kingdom); Gilroy, Rose [School of Architecture, Planning and Landscape Newcastle University, NE1 7RU (United Kingdom)

    2011-02-15

    With a focus on the residential sector, this paper explores the likelihood of the UK government meeting its energy targets. The paper contends that energy policy needs to take into account the interplay of four major factors: an ageing population of increasing diversity; a cultural inclination for older housing much of which is thermally inefficient; levels of fuel poverty; and the inexorable rise of consumer spending on leisure related services and goods. Decisions made by older households (both the poorer and the better off) may be critical to the success of energy policy. Among the better off the changing expectations of the baby boomers, with their predilection for consumption and travel, may have particular impact. The paper concludes that much of the reduction in carbon footprint made by older people's choices in heating and insulation may be offset, not only by increasing domestic thermal comfort, but also potentially by increasing consumables in the home and other consumer lifestyle choices. What could be achieved at best, may be a shift in energy mix. - Research highlights: {yields} An aging society in the UK will not lead to reduction in energy consumption. {yields} Physical ability, housing condition, cultural habits and energy poverty undermine policy. {yields} Rise of home entertainment and consumerism 'Afluenza' increase energy consumption.

  12. The challenge to UK energy policy: An ageing population perspective on energy saving measures and consumption

    International Nuclear Information System (INIS)

    Hamza, Neveen; Gilroy, Rose

    2011-01-01

    With a focus on the residential sector, this paper explores the likelihood of the UK government meeting its energy targets. The paper contends that energy policy needs to take into account the interplay of four major factors: an ageing population of increasing diversity; a cultural inclination for older housing much of which is thermally inefficient; levels of fuel poverty; and the inexorable rise of consumer spending on leisure related services and goods. Decisions made by older households (both the poorer and the better off) may be critical to the success of energy policy. Among the better off the changing expectations of the baby boomers, with their predilection for consumption and travel, may have particular impact. The paper concludes that much of the reduction in carbon footprint made by older people's choices in heating and insulation may be offset, not only by increasing domestic thermal comfort, but also potentially by increasing consumables in the home and other consumer lifestyle choices. What could be achieved at best, may be a shift in energy mix. - Research highlights: → An aging society in the UK will not lead to reduction in energy consumption. → Physical ability, housing condition, cultural habits and energy poverty undermine policy. → Rise of home entertainment and consumerism 'Afluenza' increase energy consumption.

  13. Retail Building Guide for Entrance Energy Efficiency Measures

    Energy Technology Data Exchange (ETDEWEB)

    Stein, J.; Kung, F.

    2012-03-01

    This booklet is based on the findings of an infiltration analysis for supermarkets and large retail buildings without refrigerated cases. It enables retail building managers and engineers to calculate the energy savings potential for vestibule additions for supermarkets; and bay door operation changes in large retail stores without refrigerated cases. Retail managers can use initial estimates to decide whether to engage vendors or contractors of vestibules for pricing or site-specific analyses, or to decide whether to test bay door operation changes in pilot stores, respectively.

  14. Policies and measures for economic efficiency, energy security and environment protection in India

    International Nuclear Information System (INIS)

    Venkaiah, M.; Kaushik, S.C.; Dewangan, M.L.

    2007-01-01

    India needs to sustain 8-10% economic growth to meet energy needs of people below poverty line. India would, at least, need to grow its primary energy supply (3-4 times) of present consumption to deliver a sustained growth of 8% by 2031. This paper discusses India's policies and measures for economic efficiency, environment protection and energy security (3-E). (author)

  15. An experimental approach for measuring surface potential and second crossover energy in insulators

    International Nuclear Information System (INIS)

    Fakhfakh, S; Jbara, O; Rondot, S; Rau, E I; Fakhfakh, Z

    2008-01-01

    The goal of this work is to first measure the second crossover energy E 2S under stationary electron irradiation (charging conditions) and then to show that the charge balance occurs at this beam energy and not at E 2C , the energy deduced from non-charging conditions (short pulse irradiation) as commonly assumed. The experimental procedure is based on simultaneous time dependent measurements of surface potential, leakage and displacement currents. The study is illustrated by the estimate of the real landing energy of primary electrons E L and the second crossover energy E 2S for soda-lime glass

  16. An experimental approach for measuring surface potential and second crossover energy in insulators

    Energy Technology Data Exchange (ETDEWEB)

    Fakhfakh, S; Jbara, O; Rondot, S [UTAP/LASSI, EA 3802 Faculte des Sciences, BP 1039, 51687 Reims Cedex 2 (France); Rau, E I [Institute of Microelectronics Technology of Russian Academy of Science, 142432, Chernogolovka, Moscow District (Russian Federation); Fakhfakh, Z [LaMaCop, Faculte des Sciences, Route Soukra Km 3, BP 802, CP 3018 Sfax (Tunisia)], E-mail: slimfakhfakh@yahoo.fr

    2008-05-21

    The goal of this work is to first measure the second crossover energy E{sub 2S} under stationary electron irradiation (charging conditions) and then to show that the charge balance occurs at this beam energy and not at E{sub 2C}, the energy deduced from non-charging conditions (short pulse irradiation) as commonly assumed. The experimental procedure is based on simultaneous time dependent measurements of surface potential, leakage and displacement currents. The study is illustrated by the estimate of the real landing energy of primary electrons E{sub L} and the second crossover energy E{sub 2S} for soda-lime glass.

  17. Enhancing China’s Energy Security: Determining Influential Factors ad Effective Strategic Measures

    DEFF Research Database (Denmark)

    Ren, Jingzheng; Sovacool, Benjamin, K.

    2014-01-01

    This study investigates the most influential factors affecting China’s energy security. It also identifies the most effective strategic measures for enhancing it. Fuzzy AHP has been used to determine weights for ranking the importance of Chinese energy security factors, and it has also been used...... to determine the priorities of the strategic measures with respect to enhancing those same factors. The study argues that a low proportion of renewable energy penetration is the most severe factor threatening China’s energy security, and that conducting research and development on energy technologies...

  18. A geometric measure of dark energy with pairs of galaxies.

    Science.gov (United States)

    Marinoni, Christian; Buzzi, Adeline

    2010-11-25

    Observations indicate that the expansion of the Universe is accelerating, which is attributed to a ‘dark energy’ component that opposes gravity. There is a purely geometric test of the expansion of the Universe (the Alcock–Paczynski test), which would provide an independent way of investigating the abundance (Ω(X)) and equation of state (W(X)) of dark energy. It is based on an analysis of the geometrical distortions expected from comparing the real-space and redshift-space shape of distant cosmic structures, but it has proved difficult to implement. Here we report an analysis of the symmetry properties of distant pairs of galaxies from archival data. This allows us to determine that the Universe is flat. By alternately fixing its spatial geometry at Ω(k)≡0 and the dark energy equation-of-state parameter at W(X)≡-1, and using the results of baryon acoustic oscillations, we can establish at the 68.3% confidence level that and -0.85>W(X)>-1.12 and 0.60<Ω(X)<0.80.

  19. Medium energy measurements of N-N parameters

    International Nuclear Information System (INIS)

    Ambrose, D.; Bachman, M.; Coffey, P.; Glass, G.; Jobst, B.; McNaughton, Kok Heong; Nguyen, Chau; Riley, P.J.

    1993-01-01

    Most of the effort was devoted to the study of nucleon-nucleon interactions, specifically, spin transfer measurements in np elastic scattering at LAMPF, pp elastic differential cross section measurements at LAMPF, and single-pion production in np scattering. Differential cross sections and analyzing powers are shown for np→ppπ - interactions. A new search for rare K L 0 decays to μe, μμ, and ee is being undertaken. Collaborative work has been begun on a very large, complex collider detector STAR (Solenoidal Tracker At RHIC). STAR is envisioned as a combination of a silicon vertex tracker, a time projection chamber, a set of trigger scintillators, and time-of-flight counters. It would allow measurements of spin dependence at p T above 10 GeV/c

  20. High resolution wind measurements for offshore wind energy development

    Science.gov (United States)

    Nghiem, Son Van (Inventor); Neumann, Gregory (Inventor)

    2013-01-01

    A method, apparatus, system, article of manufacture, and computer readable storage medium provide the ability to measure wind. Data at a first resolution (i.e., low resolution data) is collected by a satellite scatterometer. Thin slices of the data are determined. A collocation of the data slices are determined at each grid cell center to obtain ensembles of collocated data slices. Each ensemble of collocated data slices is decomposed into a mean part and a fluctuating part. The data is reconstructed at a second resolution from the mean part and a residue of the fluctuating part. A wind measurement is determined from the data at the second resolution using a wind model function. A description of the wind measurement is output.

  1. Thermal indoor environment and energy consumption in a plus-energy house: cooling season measurements

    DEFF Research Database (Denmark)

    Kazanci, Ongun Berk; Olesen, Bjarne W.

    2015-01-01

    the floor cooling system) and increasing the ventilation rate provided a better thermal indoor environment but with increased energy consumption. The thermal indoor environment and energy performance of the house can be improved with decreased glazing area, increased thermal mass, installation of solar......The present study is concerned with the thermal indoor environment and HVAC system energy consumption of a detached, one-story, single family, plus-energy house during a cooling season. The house was located in Denmark and it has been used as a full-scale experimental facility for one year....... The house was cooled by a floor cooling system and was ventilated with a mechanical ventilation system. Different operative temperature set-points and different ventilation rates were tested. Operative temperature at a representative location inside the occupied zone was used as an indicator of the thermal...

  2. Penumbral measurements in water for high-energy x rays

    International Nuclear Information System (INIS)

    Dawson, D.J.; Schroeder, N.J.; Hoya, J.D.

    1986-01-01

    Ionization chambers of varying inside diameter have been used to investigate the penumbral region of 60 Co, 6-MV, and 31-MV x-ray beams. Measurements were made in water at varying depths up to 25 cm for a square field of side length 10 cm. The dependence of the penumbral widths on both the inside diameter of the ionization chamber and the depth in water is established along with the asymmetry of the penumbral distributions about the 50% level. A standard correction is indicated to eliminate the dependence of the measured penumbral widths on the inside diameter of the ionization chamber

  3. Measurements of effective total macroscopic cross sections and effective energy of continuum beam

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, Hisao [Rikkyo Univ., Yokosuka, Kanagawa (Japan). Inst. for Atomic Energy

    1998-03-01

    Two practically useful quantities are introduced in this study to characterize a continuum neutron beam and to describe transmission phenomena of the beam in field of quantitative neutron radiography: an effective energy instead of a peak energy or a mean energy of the spectrum and an effective total macroscopic (ETM) cross section instead of a total macroscopic (TM) cross section defined at the monochromatic energy. The effective energy was evaluated by means of energy dependence of ETM cross section. To realize the method a beam quality indicator (BQI) has been proposed recently. Several effective energies were measured for non-filtered, filtered neutron beams, and outputs of neutron guide tubes in world by the BQI. A thermal neutron beam and three beams modulated by Pb filters with different thicknesses are studied to measure ETM cross sections for various materials and summarized in a table. Validity of the effective energy determined by the BQI is discussed relating with ETM cross sections of materials. (author)

  4. Secondary electrons monitor for continuous electron energy measurements in UHF linac

    International Nuclear Information System (INIS)

    Zimek, Zbigniew; Bulka, Sylwester; Mirkowski, Jacek; Roman, Karol

    2001-01-01

    Continuous energy measurements have now became obligatory in accelerator facilities devoted to radiation sterilization process. This is one of several accelerator parameters like dose rate, beam current, bean scan parameters, conveyer speed which must be recorded as it is a required condition of accelerator validation procedure. Electron energy measurements are rather simple in direct DC accelerator, where the applied DC voltage is directly related to electron energy. High frequency linacs are not offering such opportunity in electron energy measurements. The analyzing electromagnet is applied in some accelerators but that method can be used only in off line mode before or after irradiation process. The typical solution is to apply the non direct method related to control and measurements certain accelerator parameters like beam current and microwave energy pulse power. The continuous evaluation of electron energy can be performed on the base of calculation and result comparison with calibration curve

  5. Measurement of the stored energy in the NRX reactor reflector graphite

    International Nuclear Information System (INIS)

    Hilton, H.B.; Larson, E.A.G.

    1959-07-01

    With the co-operation of workers at Windscale and Harwell, whose assistance is hereby gratefully acknowledged, the stored energy content of the inner reflector graphite of NRX has been measured. Measurements made at three different elevations and at different positions through the reflector show that there is, at present, no danger to NRX from an accidental release of the energy. The energy stored in the reflector in 1958 is less by a factor five to ten than the stored energy as measured in 1953. It appears that there has been a continual release of stored energy since 1954 when, after the rehabilitation, the maximum power was raised to 40 MW. Additional thermocouples have been installed in the inner reflector, and future stored energy measurements are being scheduled. (author)

  6. Environmental tax reform: the Swedish experience

    International Nuclear Information System (INIS)

    Sterner, T.

    1994-01-01

    As part of a general tax reform taxes on energy and transport were increased heavily around 1991. The following year industry succeeded in repealing a number of the taxes on energy. This reform was financed by further increasing the energy taxes for the household and transport sectors. Generally it appears that the energy tax and the carbon tax are successful as revenue raisers while their environmental effect will only be seen in the long run. On the other hand such taxes as on sulphur and the tax differentiation on leaded fuel, as well as the differentiation between different qualities of diesel and fuel oil, have been very successful in an environmental sense, but have not given any substantial revenue contributions. (author)

  7. Measuring the internal energy content of molecules transported across the liquid-gas interface

    International Nuclear Information System (INIS)

    Maselli, Olivia J; Gascooke, Jason R; Buntine, Mark A; Lawrance, Warren D

    2009-01-01

    Many details concerning the mechanism associated with the liberation of molecules from a liquid surface remain to be elucidated. We use the liquid microjet technique coupled with laser spectroscopy to measure the rotational and vibrational energy content of benzene spontaneously evaporating from a water-ethanol solution. These measurements provide molecular level insight into the mass and energy transfer processes associated with evaporation.

  8. The impact of atomic precision measurements in high energy physics

    OpenAIRE

    Casalbuoni, Roberto

    2000-01-01

    In this talk I discuss the relevance of atomic physics in understanding some important questions about elementary particle physics. A particular attention is devoted to atomic parity violation measurements which seem to suggest new physics beyond the Standard Model. Atomic physics might also be relevant in discovering possible violations of the CPT symmetry.

  9. Measurements of Wave Power in Wave Energy Converter Effectiveness Evaluation

    Directory of Open Access Journals (Sweden)

    Berins J.

    2017-08-01

    Full Text Available The article is devoted to the technical solution of alternative budget measuring equipment of the water surface gravity wave oscillation and the theoretical justification of the calculated oscillation power. This solution combines technologies such as lasers, WEB-camera image digital processing, interpolation of defined function at irregular intervals, volatility of discrete Fourier transformation for calculating the spectrum.

  10. Measured Zero Net Energy Performance: Results, Lessons, and Surprises

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Carrie; LaRue, Anna; Pigman, Margaret; Roberts, Jon; Kaneda, David; Connelly, Dylan; Elliott, John; Pless, Shanti; Pande, Abhijeet; Dean, Edward; Anbarlilar, Can

    2016-08-26

    As more and more zero net energy (ZNE) buildings are built and monitored, we can learn from both careful case studies of individual projects as well as a broader perspective of trends over time. In a forum sponsored by Pacific Gas and Electric Company (PG&E), eight expert speakers discussed: results and lessons from monitoring occupied ZNE buildings; best practices for setting performance targets and getting actionable performance information, and; things that have surprised them about monitored ZNE buildings. This paper distills the content of the forum by laying out the most common hurdles that are encountered in setting up monitoring projects, frequent performance issues that the monitoring uncovers, and lessons learned that can be applied to future projects.

  11. Advantages and limitations of experimental techniques used to measure cardiac energy metabolism.

    Science.gov (United States)

    Lopaschuk, G D

    1997-01-01

    The heart requires a constant supply of energy to sustain contractile function, which is supplied by hydrolysis of adenosine triphosphate derived primarily from the metabolism of fatty acids and carbohydrates. Understanding how production of adenosine triphosphate is regulated in the heart is critical to an understanding of how alterations in energy metabolism contribute to the severity of cardiac disease. A number of techniques can be used to measure energy metabolism in the heart. They include biochemical measurement of metabolites and enzymes of intermediary metabolism, measurement of arteriovenous differences in carbon substrate extraction by the heart, measurement of high-energy phosphates with 31P nuclear magnetic resonance, measurement of the rate of flux through the pathways of intermediary metabolism with 14C- and 3H-labeled carbon substrates, measurement of tricarboxylic acid cycle activity with 13C nuclear magnetic resonance, and measurement of glucose uptake and oxidative metabolism with positron emission tomography. Each of these techniques has advantages and limitations.

  12. Low energy (e,2e) measurements of Xe in the symmetric non-coplanar geometry

    International Nuclear Information System (INIS)

    Nixon, K L; Murray, A J

    2012-01-01

    Low energy (e,2e) measurements from the valence state of xenon will be presented. Symmetric non-coplanar kinematics were utilized. Incident energies range from 5 to 40eV above the ionization potential with outgoing electron angles from 30-140°. Geometries from coplanar to perpendicular were investigated for each energy regime. These measurements show significant difference to those from helium and other noble gases, particularly at high incident electron angles.

  13. Development and validation of a CFD-based steam reformer model

    DEFF Research Database (Denmark)

    Kær, Søren Knudsen; Dahlqvist, Mathis; Saksager, Anders

    2006-01-01

    a detailed mechanism for the reforming reactions. Heat exchange between the flue gas and reformate streams through the reformer reactor walls was also included as a conjugate heat transfer process.  From a review of published models for the catalytic steam reforming of ethanol and preliminary predictions...... in a commercial ethanol steam reformer. The illustrations below show the measurements locations and predicted and measured temperature profiles. From detailed comparison with the measurements it was concluded that a mechanism for catalytic steam reforming of methane gives a reasonably accurate representation......Steam reforming of liquid biofuels (ethanol, bio-diesel etc.) represents a sustainable source of hydrogen for micro Combined Heat and Power (CHP) production as well as Auxiliary Power Units (APUs). In relation to the design of the steam reforming reactor several parameter are important including...

  14. Low energy X-ray spectra measured with a mercuric iodide energy dispersive spectrometer in a scanning electron microscope

    Science.gov (United States)

    Iwanczyk, J. S.; Dabrowski, A. J.; Huth, G. C.; Bradley, J. G.; Conley, J. M.

    1986-01-01

    A mercuric iodide energy dispersive X-ray spectrometer, with Peltier cooling provided for the detector and input field effect transistor, has been developed and tested in a scanning electron microscope. X-ray spectra were obtained with the 15 keV electron beam. An energy resolution of 225 eV (FWHM) for Mn-K(alpha) at 5.9 keV and 195 eV (FWHM) for the Mg-K line at 1.25 keV has been measured. Overall system noise level was 175 eV (FWHM). The detector system characterization with a carbon target demonstrated good energy sensitivity at low energies and lack of significant spectral artifacts at higher energies.

  15. Grant request: to implement energy conservation measures as part of the state original and supplemental energy conservation plans

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-16

    The program measures described in this document comprise a grant request to DOE under the Energy Policy and Conservation Act of 1975 and the Energy Conservation and Production Act of 1976. The amount requested, $5,555,000, will allow the extension, acceleration, and implementation of energy conservation activities already in progress in California. Accomplishments to date have included the adoption of residential standards, and the implementation of an energy survey program for public buildings. Efficiency standards have been established for refrigerators and room and central air conditioners, appliances which utilize a significant amount of residential energy. Before the end of 1977, efficiency standards will be established for clothes dryers, washers, and water heaters. Program elements are: technical/financial assistance; public awareness; standards setting; solar element; research/analysis/evaluation; and coordination and management.

  16. Moving towards tangible decision-making tools for policy makers: Measuring and monitoring energy access provision

    International Nuclear Information System (INIS)

    Bhanot, Jaya; Jha, Vivek

    2012-01-01

    Access to energy services has been recognised as central to achieving economic growth and sustainable development. However, almost 1.3 billion people in the world still lack access to electricity and 2.7 billion lack access to clean cooking facilities. In this backdrop, the issue of energy access is receiving more interest than ever before and this has brought to the fore, the need for a robust decision support tool for policy makers to measure the progress of energy access provision and also to provide direction for future policy making. The paper studies existing definitions of energy access and identifies the key requirements for an appropriate decision-making tool to measure and monitor energy access provision. In this context the paper assesses the strengths and weaknesses of the metrics currently being used to measure energy access in policy, as well as of contemporary monitoring and evaluation frameworks being used in other sectors. Based on these insights, a dashboard of indicators is proposed as an alternate decision support tool for policy makers to measure energy access. The paper concludes with a discussion on what is needed to operationalise this proposed framework. - Highlights: ► No one indicator or metric can successfully capture progress on energy access. ► A service oriented approach is necessary to measure energy access. ► Socio-economic and political contexts influence success of energy access policies.

  17. Examining student ideas about energy measurements on quantum states across undergraduate and graduate levels

    Directory of Open Access Journals (Sweden)

    Gina Passante

    2015-09-01

    Full Text Available [This paper is part of the Focused Collection on Upper Division Physics Courses.] Energy measurements play a fundamental role in the theory of quantum mechanics, yet there is evidence that the underlying concepts are difficult for many students, even after all undergraduate instruction. We present results from an investigation into student ability to determine the possible energies that can be measured for a given wave function and Hamiltonian, to determine the probabilities of each energy measurement and how they depend on time, and to recognize how a measurement of energy affects the state. By analyzing student responses to open-ended questions, we identify five broad, interrelated sets of conceptual and reasoning difficulties related to energy measurements. Data are drawn from sophomore-, junior-, and graduate-level quantum mechanics courses. Particular attention is paid to incorrect ideas that persist across all levels.

  18. Effect of length of measurement period on accuracy of predicted annual heating energy consumption of buildings

    International Nuclear Information System (INIS)

    Cho, Sung-Hwan; Kim, Won-Tae; Tae, Choon-Soeb; Zaheeruddin, M.

    2004-01-01

    This study examined the temperature dependent regression models of energy consumption as a function of the length of the measurement period. The methodology applied was to construct linear regression models of daily energy consumption from 1 day to 3 months data sets and compare the annual heating energy consumption predicted by these models with actual annual heating energy consumption. A commercial building in Daejon was selected, and the energy consumption was measured over a heating season. The results from the investigation show that the predicted energy consumption based on 1 day of measurements to build the regression model could lead to errors of 100% or more. The prediction error decreased to 30% when 1 week of data was used to build the regression model. Likewise, the regression model based on 3 months of measured data predicted the annual energy consumption within 6% of the measured energy consumption. These analyses show that the length of the measurement period has a significant impact on the accuracy of the predicted annual energy consumption of buildings

  19. High-Resolution Wind Measurements for Offshore Wind Energy Development

    Science.gov (United States)

    Nghiem, Son V.; Neumann, Gregory

    2011-01-01

    A mathematical transform, called the Rosette Transform, together with a new method, called the Dense Sampling Method, have been developed. The Rosette Transform is invented to apply to both the mean part and the fluctuating part of a targeted radar signature using the Dense Sampling Method to construct the data in a high-resolution grid at 1-km posting for wind measurements over water surfaces such as oceans or lakes.

  20. Measuring the security of external energy supply in the European Union

    International Nuclear Information System (INIS)

    Le Coq, Chloe; Paltseva, Elena

    2009-01-01

    The security of energy supply is one of the main objectives of EU energy policy. In this paper, we introduce an index designed to evaluate the short-term risks associated with the external supply of energy to the EU Member States. It combines measures of energy import diversification, political risks of the supplying country, risk associated with energy transit, and the economic impact of a supply disruption. We construct separate indexes for three primary energy types, oil, gas and coal, and demonstrate that Member States' levels of supply risk exposure differ across energies. Most other studies of this kind provide aggregate indexes combining different types of energy. Our results suggest that an aggregate approach could be misleading, at least for discussions of the short-term response to risks. We discuss the implications of our findings for the common energy policy. (author)

  1. Measuring the security of external energy supply in the European Union

    Energy Technology Data Exchange (ETDEWEB)

    Le Coq, Chloe [SITE, Stockholm School of Economics, P.O. Box 6501, Stockholm 11383 (Sweden); Paltseva, Elena [Department of Economics, Copenhagen University, Oester Farimagsgade 5, Building 26, 1353 Copenhagen (Denmark)

    2009-11-15

    The security of energy supply is one of the main objectives of EU energy policy. In this paper, we introduce an index designed to evaluate the short-term risks associated with the external supply of energy to the EU Member States. It combines measures of energy import diversification, political risks of the supplying country, risk associated with energy transit, and the economic impact of a supply disruption. We construct separate indexes for three primary energy types, oil, gas and coal, and demonstrate that Member States' levels of supply risk exposure differ across energies. Most other studies of this kind provide aggregate indexes combining different types of energy. Our results suggest that an aggregate approach could be misleading, at least for discussions of the short-term response to risks. We discuss the implications of our findings for the common energy policy. (author)

  2. Energy reduction in buildings in temperate and tropic regions utilizing a heat loss measuring device

    DEFF Research Database (Denmark)

    Sørensen, Lars Schiøtt

    2012-01-01

    for heating up, and cooling down our houses. There is a huge energy saving potential on this area reducing both the World climate problems and economy challenges as well. Heating of buildings in Denmark counts for approximately 40% of the entire national energy consume. Of this reason a reduction of heat...... to ACMV in the "warm countries" contribute to an enormous energy consumption and corresponding CO2 emission. In order to establish the best basis for energy renovation, it is important to have measures of the heat losses on a building façade, for optimizing the energy renovation. This paper will present......There exist two ordinary ways to obtain global energy efficiency. One way is to make improvements on the energy production and supply side, and the other way is, in general, to reduce the consume of energy in the society. This paper has focus on the latter and especially the consume of energy...

  3. Implications of low and high energy measurements on SUSY models

    Energy Technology Data Exchange (ETDEWEB)

    Jegerlehner, Fred [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Humboldt-Universitaet, Berlin (Germany). Inst. fuer Physik

    2012-04-15

    New Physics searches at the LHC have increased significantly lower bounds on unknown particle masses. This increases quite dramatically the tension in the interpretation of the data: low energy precision data which are predicted accurately by the SM (LEP observables like M{sub W} or loop induced rare processes like B {yields}X{sub s}{gamma} or B{sub s}{yields}{mu}{sup +}{mu}{sup -}) and quantities exhibiting an observed discrepancy between SM theory and experiment, most significantly found for the muon g-2 seem to be in conflict now. (g-2){sub {mu}} appears to be the most precisely understood observable which at the same time reveals a 3-4 {sigma} deviation between theory and experiment and thus requires a significant new physics contribution. The hints for a Higgs of mass about 125 GeV, which is precisely what SUSY extensions of the SM predict, seem to provide a strong indication for SUSY. At the same time it brings into serious trouble the interpretation of the (g-2){sub {mu}} deviation as a SUSY contribution.

  4. Implications of low and high energy measurements on SUSY models

    International Nuclear Information System (INIS)

    Jegerlehner, Fred; Humboldt-Universitaet, Berlin

    2012-03-01

    New Physics searches at the LHC have increased significantly lower bounds on unknown particle masses. This increases quite dramatically the tension in the interpretation of the data: low energy precision data which are predicted accurately by the SM (LEP observables like M W or loop induced rare processes like B →X s γ or B s →μ + μ - ) and quantities exhibiting an observed discrepancy between SM theory and experiment, most significantly found for the muon g-2 seem to be in conflict now. (g-2) μ appears to be the most precisely understood observable which at the same time reveals a 3-4 σ deviation between theory and experiment and thus requires a significant new physics contribution. The hints for a Higgs of mass about 125 GeV, which is precisely what SUSY extensions of the SM predict, seem to provide a strong indication for SUSY. At the same time it brings into serious trouble the interpretation of the (g-2) μ deviation as a SUSY contribution.

  5. Wind measurements for wind energy applications. A review

    DEFF Research Database (Denmark)

    Mortensen, N.G.

    1994-01-01

    A review is given of the error sources and uncertainties in cup and sonic anemometry. In both cases the effects of the tower, boom and other mounting arrangements, as well as the siting of the anemometer, should be considered carefully. Cup anemometer measurements are inherently biased due...... to the turbulent nature of the wind, but these errors can be neglected in many applications if a well-designed, fast-responding anemometer is used. The response characteristics of sonic anemometers are fairly complicated. Based on wind tunnel investigations and field comparisons some of the associated errors...

  6. Energy corrections in pulsed neutron measurements for cylindrical geometry

    International Nuclear Information System (INIS)

    Drozdowicz, K.; Woznicka, U.

    1982-01-01

    A solution of the thermal neutron diffusion equation for a two-region concentric cylindrical system, with a constant neutron flux in the inner medium assumed, is given. The velocity-averaged dynamic parameters for thermal neutrons are used in the method. The corrections due to the diffusion cooling are introduced into the dynamic material buckling and into the velocity distribution of the thermal neutron flux. Detailed relations obtained for a hydrogenous moderator are given. Results of the measurements of the thermal neutron macroscopic absorption cross-sections for the samples in the two-region cylindrical systems are presented. (author)

  7. Purchasing-power-parity (PPP) approach to energy-efficiency measurement: implications for energy and environmental policy

    International Nuclear Information System (INIS)

    Birol, Fatih; Okogu, B.E.

    1997-01-01

    The weaknesses of the traditional measure of national output are well known and, in recent years, efforts to find more appropriate alternatives have intensified. One such methodology is the PPP approach which may capture the real value of the GDP. In general, this approach raises the incomes of developing countries by a substantial amount, and this has serious implications for energy indicators on which policies are usually based. A further problem is that non-commercial energy is usually left out of energy-intensity calculations. We analyze the issue of energy-efficiency and carry out calculations based on three approaches: the traditional approach, the PPP-based income approach and an approach which includes non-commercial energy. The results confirm the limitations of using the PPP approach, as its results in a spuriously high energy-efficiency level suggesting high technological sophistication for developing countries. The inclusion of non-commercial energy gives more complete picture. The main conclusion is that applying the PPP method in energy-intensity calculations may be misleading. (Author)

  8. Health effects associated with energy conservation measures in commercial buildings

    Energy Technology Data Exchange (ETDEWEB)

    Stenner, R.D.; Baechler, M.C.

    1990-09-01

    Indoor air quality can be impacted by hundreds of different chemicals. More than 900 different organic compounds alone have been identified in indoor air. Health effects that could arise from exposure to individual pollutants or mixtures of pollutants cover the full range of acute and chronic effects, including largely reversible responses, such as rashes and irritations, to the irreversible toxic and carcinogenic effects. These indoor contaminants are emitted from a large variety of materials and substances that are widespread components of everyday life. Pacific Northwest Laboratory conducted a search of the peer-reviewed literature on health effects associated with indoor air contaminants for the Bonneville Power Administration to aid the agency in the preparation of environmental documents. Results are reported in two volumes. Volume 1 summarizes the results of the search of the peer-reviewed literature on health effects associated with a selected list of indoor air contaminants. In addition, the report discusses potential health effects of polychlorinated biphenyls and chlorofluorocarbons. All references to the literature reviewed are found in this document Volume 2. Volume 2 provides detailed information from the literature reviewed, summarizes potential health effects, reports health hazard ratings, and discusses quantitative estimates of carcinogenic risk in humans and animals. Contaminants discussed in this report are those that; have been measured in the indoor air of a public building; have been measured (significant concentrations) in test situations simulating indoor air quality (as presented in the referenced literature); and have a significant hazard rating. 38 refs., 7 figs., 23 tabs.

  9. Health effects associated with energy conservation measures in commercial buildings

    International Nuclear Information System (INIS)

    Stenner, R.D.; Baechler, M.C.

    1990-09-01

    Indoor air quality can be impacted by hundreds of different chemicals. More than 900 different organic compounds alone have been identified in indoor air. Health effects that could arise from exposure to individual pollutants or mixtures of pollutants cover the full range of acute and chronic effects, including largely reversible responses, such as rashes and irritations, to the irreversible toxic and carcinogenic effects. These indoor contaminants are emitted from a large variety of materials and substances that are widespread components of everyday life. Pacific Northwest Laboratory conducted a search of the peer-reviewed literature on health effects associated with indoor air contaminants for the Bonneville Power Administration to aid the agency in the preparation of environmental documents. Results are reported in two volumes. Volume 1 summarizes the results of the search of the peer-reviewed literature on health effects associated with a selected list of indoor air contaminants. In addition, the report discusses potential health effects of polychlorinated biphenyls and chlorofluorocarbons. All references to the literature reviewed are found in this document Volume 2. Volume 2 provides detailed information from the literature reviewed, summarizes potential health effects, reports health hazard ratings, and discusses quantitative estimates of carcinogenic risk in humans and animals. Contaminants discussed in this report are those that; have been measured in the indoor air of a public building; have been measured (significant concentrations) in test situations simulating indoor air quality (as presented in the referenced literature); and have a significant hazard rating. 38 refs., 7 figs., 23 tabs

  10. LAND REFORM IN UKRAINE: HISTORIOGRAPHICAL ANALYSIS

    Directory of Open Access Journals (Sweden)

    Barantsov B.

    2016-05-01

    Full Text Available Modern land reform, that continues in Ukraine since the beginning of the 90-th of ХХ century, is a logical result of the functioning of society and the state.. It’s prerequisites becames, especially full monopolization of state on ownership of land; absence of payment for land as one of the means of ensuring the rational use of lands; absence on workers motivation for intensive work on the land, etc.. These and other preconditions contributed to soil degradation, production of agricultural products with exceeding of maximum allowable concentrations of pollutants, development of diseases, undermine the gene pool of nature and man. Mentioned reasons determined the goal and objectives of modern land reform, which were originally set out in the preamble to the Resolution of the Verkhovna Rada of Ukraine from December 18, 1990 «On Land Reform» with following changes and additions, and in the implementation of the land-reformation measures gained more complete content. Conducted analysis shows that land reform in Ukraine leads to a change of ownership of land, contributes to solving problems of citizens by land plots, enactment of payment for land usecreation of conditions for the development of land market. Thus changing land relations, is formed legal and regulatory framework of land reform and land market. However, positive developments in the implementation of land reform to end of the 90-th years have not led to a radical and effective upgrade of agricultural production, recovery of investment processes in other branches of industry, improving of welfare of the population. Land reform measures didn’t receive adequate financial support. The ultimate goal - an economically-effective and environmentally safe use of land in Ukraine - has not been achieved. Further reforming of land relations contributed to the adoption in October 2001 of the Land Code of Ukraine in the new edition that created the legal principles of land reform. Since it

  11. A method to identify energy efficiency measures for factory systems based on qualitative modeling

    CERN Document Server

    Krones, Manuela

    2017-01-01

    Manuela Krones develops a method that supports factory planners in generating energy-efficient planning solutions. The method provides qualitative description concepts for factory planning tasks and energy efficiency knowledge as well as an algorithm-based linkage between these measures and the respective planning tasks. Its application is guided by a procedure model which allows a general applicability in the manufacturing sector. The results contain energy efficiency measures that are suitable for a specific planning task and reveal the roles of various actors for the measures’ implementation. Contents Driving Concerns for and Barriers against Energy Efficiency Approaches to Increase Energy Efficiency in Factories Socio-Technical Description of Factory Planning Tasks Description of Energy Efficiency Measures Case Studies on Welding Processes and Logistics Systems Target Groups Lecturers and Students of Industrial Engineering, Production Engineering, Environmental Engineering, Mechanical Engineering Practi...

  12. Resource Assessment of Tidal Current Energy in Hangzhou Bay Based on Long Term Measurement

    Science.gov (United States)

    Zhang, Feng; Dai, Chun-Ni; Xu, Xue-Feng; Wang, Chuan-Kun; Ye, Qin

    2017-05-01

    Compared with other marine renewable energy, tidal current energy benefits a lot in high energy density and good predictability. Based on the measured tidal current data in Hangzhou Bay from Nov 2012 to Oct 2012, this paper analysed temporal and spatial changes of tidal current energy in the site. It is the first time measured data of such long time been taken in tidal current energy analysis. Occurrence frequency and duration of the current of different speed are given out in the paper. According to the analysis results, monthly average power density changed a lot in different month, and installation orientation of tidal current turbine significantly affected energy acquisition. Finally, the annual average power density of tidal current energy with coefficient Cp in the site was calculated, and final output of a tidal current plant was also estimated.

  13. The challenge to UK energy policy. An ageing population perspective on energy saving measures and consumption

    Energy Technology Data Exchange (ETDEWEB)

    Hamza, Neveen; Gilroy, Rose [School of Architecture, Planning and Landscape Newcastle University, NE1 7RU (United Kingdom)

    2011-02-15

    With a focus on the residential sector, this paper explores the likelihood of the UK government meeting its energy targets. The paper contends that energy policy needs to take into account the interplay of four major factors: an ageing population of increasing diversity; a cultural inclination for older housing much of which is thermally inefficient; levels of fuel poverty; and the inexorable rise of consumer spending on leisure related services and goods. Decisions made by older households (both the poorer and the better off) may be critical to the success of energy policy. Among the better off the changing expectations of the baby boomers, with their predilection for consumption and travel, may have particular impact. The paper concludes that much of the reduction in carbon footprint made by older people's choices in heating and insulation may be offset, not only by increasing domestic thermal comfort, but also potentially by increasing consumables in the home and other consumer lifestyle choices. What could be achieved at best, may be a shift in energy mix. (author)

  14. Energy Consumption and Indoor Climate Measurements in New Low-Energy Houses

    DEFF Research Database (Denmark)

    Mørck, Ove; Andersen, Karen Holmegaard; Bergsøe, Niels Christian

    2013-01-01

    The CLASS1 project commenced in 2007 and involves 5 countries: Denmark, Estonia, France, Italy and Romania. Originally, 442 dwellings, a kindergarten and an activity centre for elderly people were to be designed and constructed as "low-energy class 1" houses according to requirements set by the M...

  15. Assessment of Retrofitting Measures for a Large Historic Research Facility Using a Building Energy Simulation Model

    Directory of Open Access Journals (Sweden)

    Young Tae Chae

    2016-06-01

    Full Text Available A calibrated building simulation model was developed to assess the energy performance of a large historic research building. The complexity of space functions and operational conditions with limited availability of energy meters makes it hard to understand the end-used energy consumption in detail and to identify appropriate retrofitting options for reducing energy consumption and greenhouse gas (GHG emissions. An energy simulation model was developed to study the energy usage patterns not only at a building level, but also of the internal thermal zones, and system operations. The model was validated using site measurements of energy usage and a detailed audit of the internal load conditions, system operation, and space programs to minimize the discrepancy between the documented status and actual operational conditions. Based on the results of the calibrated model and end-used energy consumption, the study proposed potential energy conservation measures (ECMs for the building envelope, HVAC system operational methods, and system replacement. It also evaluated each ECM from the perspective of both energy and utility cost saving potentials to help retrofitting plan decision making. The study shows that the energy consumption of the building was highly dominated by the thermal requirements of laboratory spaces. Among other ECMs the demand management option of overriding the setpoint temperature is the most cost effective measure.

  16. The measurement of absorbed Charpy impact energy using a vertical drop tower

    Science.gov (United States)

    Server, W. L.; Henderson, G. R.

    1981-05-01

    Standard Charpy calibration specimens designed for verification of pendulum impact machines have been tested on a vertical drop tower impact machine. Two different test techniques (optical velocity measurement and integrated digital load-time response) for measuring the fracture energy of these specimens have produced equivalent sets of data which match the range of expected pendulum machine results. The more flexible vertical drop tower machine can therefore be used to measure Charpy impact energies with the same reliability as the conventional pendulum machines.

  17. Planning a Regional Energy System in Association with the Creation of Energy Performance Certificates (EPCs, Statistical Analysis and Energy Efficiency Measures: An Italian Case Study

    Directory of Open Access Journals (Sweden)

    Kristian Fabbri

    2013-08-01

    Full Text Available Directive 2002/91/EC EPBD introduced the Energy Performance Certificate (EPC as a tool to guide the real estate market in the creation of products (buildings with improved energy performances. The EPC’s information could be useful in the determination of relevant policies and also in studying the characteristics of the building resources of the territory. This paper presents a case study related to the EPC Database of the Emilia-Romagna Region in mid-northern Italy. The case study shows a way of elaborating the EPC information in statistical analysis evaluations with aggregate data, in order to measure a territory and then direct energy policies toward energy efficiency. A statistical approach was used to define a characteristic statistical indicator index of the EPC database, and compare the energy index with the bottom-up and top-down methods, in order to identify some energy policy scenarios.

  18. Operating envelope of a short contact time fuel reformer for propane catalytic partial oxidation

    Science.gov (United States)

    Waller, Michael G.; Walluk, Mark R.; Trabold, Thomas A.

    2015-01-01

    Fuel cell technology has yet to realize widespread deployment, in part because of the hydrogen fuel infrastructure required for proton exchange membrane systems. One option to overcome this barrier is to produce hydrogen by reforming propane, which has existing widespread infrastructure, is widely used by the general public, easily transported, and has a high energy density. The present work combines thermodynamic modeling of propane catalytic partial oxidation (cPOx) and experimental performance of a Precision Combustion Inc. (PCI) Microlith® reactor with real-time soot measurement. Much of the reforming research using Microlith-based reactors has focused on fuels such as natural gas, JP-8, diesel, and gasoline, but little research on propane reforming with Microlith-based catalysts can be found in literature. The aim of this study was to determine the optimal operating parameters for the reformer that maximizes efficiency and minimizes solid carbon formation. The primary parameters evaluated were reformate composition, carbon concentration in the effluent, and reforming efficiency as a function of catalyst temperature and O2/C ratio. Including the lower heating values for product hydrogen and carbon monoxide, efficiency of 84% was achieved at an O2/C ratio of 0.53 and a catalyst temperature of 940 °C, resulting in near equilibrium performance. Significant solid carbon formation was observed at much lower catalyst temperatures, and carbon concentration in the effluent was determined to have a negative linear relationship at T reactor displayed good stability during more than 80 experiments with temperature cycling from 360 to 1050 °C.

  19. Figure Measurements of High-Energy-X-Ray Replicated Optics

    Science.gov (United States)

    Gubarev, Mikhail; Ramsey, Brian; Kester, Thomas; Engelhaupt, Darell; Speegle, Chet; Martin, Greg

    2003-01-01

    We are developing grazing incidence x-ray optics for a balloon-borne hard-x-ray telescope (HERO). The HERO mirror shells are fabricated using electroform-nickel replication off super-polished cylindrical mandrels. One of the sources for mirror resolution error is departure of the shell figure from prescription. We have modified a Vertical-scan Long Trace Profilometer (VLTP) in order to measure the figure of the inner surface of the HERO mirror shells for diameters as small as 76 mm. Mirror alignment method and sources for systematic errors will be discussed. Comparison of figure metrology of the mandrel and the shells will be presented together with results from x-ray tests.

  20. Measuring energy security. Can the United States achieve oil independence?

    International Nuclear Information System (INIS)

    Greene, David L.

    2010-01-01

    Stochastic simulation of the direct economic costs of oil dependence in an uncertain future is proposed as a useful metric of oil dependence. The market failure from which these costs arise is imperfect competition in the world oil market, chiefly as a consequence of the use of market power by the Organization of the Petroleum Exporting Countries (OPEC) cartel. Oil dependence costs can be substantial. It is estimated that oil dependence costs to the US economy in 2008 will exceed $500 billion. Other costs, such as military expenditures or foreign policy constraints are deemed to be largely derivative of the actual or potential economic costs of oil dependence. The use of quantifiable economic costs as a security metric leads to a measurable definition of oil independence, or oil security, which can be used to test the ability of specific policies to achieve oil independence in an uncertain future. (author)

  1. A small low energy cyclotron for radioisotope measurements

    International Nuclear Information System (INIS)

    Bertsche, K.J.

    1989-11-01

    Direct detection of 14 C by accelerator mass spectrometry has proved to be a much more sensitive method for radiocarbon dating than the decay counting method invented earlier by Libby. A small cyclotron (the ''cyclotrino'') was proposed for direct detection of radiocarbon in 1980. This combined the suppression of background through the use of negative ions, which had been used effectively in tandem accelerators, with the high intrinsic mass resolution of a cyclotron. Development of a small electrostatically-focused cyclotron for use as a mass spectrometer was previously reported but the sensitivity needed for detection of 14 C at natural abundance was not achieved. The major contributions of this work are the integration of a high current external ion source with a small flat-field, electrostatically-focused cyclotron to comprise a system capable of measuring 14 C at natural levels, and the analysis of ion motion in such a cyclotron, including a detailed analysis of phase bunching and its effect on mass resolution. A high current cesium sputter negative ion source generates a beam of carbon ions which is pre-separated with a Wien filter and is transported to the cyclotron via a series of electrostatic lenses. Beam is injected radially into the cyclotron using electrostatic deflectors and an electrostatic mirror. Axial focusing is entirely electrostatic. A microchannel plate detector is used with a phase-grated output. In its present form the system is capable of improving the sensitivity of detecting 14 C in some biomedical experiments by a factor of 10 4 . Modifications are discussed which could bring about an additional factor of 100 in sensitivity, which is important for archaeological and geological applications. Possibilities for measurements of other isotopes, such as 3 H, and 10 Be, and 26 Al, are discussed. 70 refs

  2. Environment project: 50 measures for a development of the high environmental quality renewable energies; Grenelle Environnement: 50 mesures pour un developpement des energies renouvelables a haute qualite environnementale

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-11-15

    This document presents the 50 measures decided by the government to develop the renewable energies in France and reach the 20% of participation to the energy production in 2020. Some measures concern all the renewable energies, they deal with the regulation, the administrative procedures of the building, others are specific to each energy. (A.L.B.)

  3. A novel sensor platform matching the improved version of IPMVP option C for measuring energy savings.

    Science.gov (United States)

    Tseng, Yen-Chieh; Lee, Da-Sheng; Lin, Cheng-Fang; Chang, Ching-Yuan

    2013-05-22

    It is easy to measure energy consumption with a power meter. However, energy savings cannot be directly computed by the powers measured using existing power meter technologies, since the power consumption only reflects parts of the real energy flows. The International Performance Measurement and Verification Protocol (IPMVP) was proposed by the Efficiency Valuation Organization (EVO) to quantify energy savings using four different methodologies of A, B, C and D. Although energy savings can be estimated following the IPMVP, there are limitations on its practical implementation. Moreover, the data processing methods of the four IPMVP alternatives use multiple sensors (thermometer, hygrometer, Occupant information) and power meter readings to simulate all facilities, in order to determine an energy usage benchmark and the energy savings. This study proposes a simple sensor platform to measure energy savings. Using usually the Electronic Product Code (EPC) global standard, an architecture framework for an information system is constructed that integrates sensors data, power meter readings and occupancy conditions. The proposed sensor platform is used to monitor a building with a newly built vertical garden system (VGS). A VGS shields solar radiation and saves on energy that would be expended on air-conditioning. With this platform, the amount of energy saved in the whole facility is measured and reported in real-time. The data are compared with those obtained from detailed measurement and verification (M&V) processes. The discrepancy is less than 1.565%. Using measurements from the proposed sensor platform, the energy savings for the entire facility are quantified, with a resolution of ±1.2%. The VGS gives an 8.483% daily electricity saving for the building. Thus, the results show that the simple sensor platform proposed by this study is more widely applicable than the four complicated IPMVP alternatives and the VGS is an effective tool in reducing the carbon

  4. A Novel Sensor Platform Matching the Improved Version of IPMVP Option C for Measuring Energy Savings

    Directory of Open Access Journals (Sweden)

    Ching-Yuan Chang

    2013-05-01

    Full Text Available It is easy to measure energy consumption with a power meter. However, energy savings cannot be directly computed by the powers measured using existing power meter technologies, since the power consumption only reflects parts of the real energy flows. The International Performance Measurement and Verification Protocol (IPMVP was proposed by the Efficiency Valuation Organization (EVO to quantify energy savings using four different methodologies of A, B, C and D. Although energy savings can be estimated following the IPMVP, there are limitations on its practical implementation. Moreover, the data processing methods of the four IPMVP alternatives use multiple sensors (thermometer, hygrometer, Occupant information and power meter readings to simulate all facilities, in order to determine an energy usage benchmark and the energy savings. This study proposes a simple sensor platform to measure energy savings. Using usually the Electronic Product Code (EPC global standard, an architecture framework for an information system is constructed that integrates sensors data, power meter readings and occupancy conditions. The proposed sensor platform is used to monitor a building with a newly built vertical garden system (VGS. A VGS shields solar radiation and saves on energy that would be expended on air-conditioning. With this platform, the amount of energy saved in the whole facility is measured and reported in real-time. The data are compared with those obtained from detailed measurement and verification (M&V processes. The discrepancy is less than 1.565%. Using measurements from the proposed sensor platform, the energy savings for the entire facility are quantified, with a resolution of ±1.2%. The VGS gives an 8.483% daily electricity saving for the building. Thus, the results show that the simple sensor platform proposed by this study is more widely applicable than the four complicated IPMVP alternatives and the VGS is an effective tool in reducing the

  5. Health care reforms.

    Science.gov (United States)

    Marušič, Dorjan; Prevolnik Rupel, Valentina

    2016-09-01

    In large systems, such as health care, reforms are underway constantly. The article presents a definition of health care reform and factors that influence its success. The factors being discussed range from knowledgeable personnel, the role of involvement of international experts and all stakeholders in the country, the importance of electoral mandate and governmental support, leadership and clear and transparent communication. The goals set need to be clear, and it is helpful to have good data and analytical support in the process. Despite all debates and experiences, it is impossible to clearly define the best approach to tackle health care reform due to a different configuration of governance structure, political will and state of the economy in a country.

  6. Rorty the Reformer?

    Directory of Open Access Journals (Sweden)

    Harvey Cormier

    2008-12-01

    Full Text Available Rorty should be read as a reformer, rather than a revolutionary transformer. While the reformer aims to improve what is already good, the revolutionary transformer seeks to dispense with the merely good in a quest for the absolutely best. For Rorty this choice was a bad choice. In order to make the case that Rorty was a reformer,we explicate Rorty’s views on truth. These views argue that we can obtain consensus about what is worth preserving and improving without reference to either rightness, truth, or objectivity. For after all, there is no way for philosophers to get outside the circle of language within which we debate about what we take to be authoritative and aceptable.

  7. Numerical simulations on efficiency and measurement of capabilities of BGO detectors for high energy gamma ray

    CERN Document Server

    Wen Wan Xin

    2002-01-01

    The energy resolution and time resolution of two phi 75 x 100 BGO detectors for high energy gamma ray newly made were measured with sup 1 sup 3 sup 7 Cs and sup 6 sup 0 Co resources. The two characteristic gamma rays of high energy emitted from the thermal neutron capture of germanium in BGO crystal were used for the energy calibration of gamma spectra. The intrinsic photopeak efficiency, single escape probability and double escape probabilities of BGO detectors in photon energy range of 4-30 MeV are numerically calculated with GEANT code. The real count response and count ratio of the uniformly distributed incident photons in energy range of 0-30 MeV are also calculated. The distortion of gamma spectra caused by the photon energy loss extension to lower energy in detection medium is discussed

  8. Lithuanian way of reforms to electricity market

    International Nuclear Information System (INIS)

    Bacauskas, A.

    2002-01-01

    Lithuania has inherited a structure of the energy industry, which originally has been developed not for the country, as an independent state, but according to the provisions of the former USSR energy policy, covering energy demand of whole region, including the Baltic countries, Belarus and the Kaliningrad region of Russia. The Lithuanian power system is interconnected by high voltage power lines and operates in parallel with Latvian, Estonian, Russian and Belarus power systems. During twelve years of independence the power sector passed significant changes from a vertically integrated monopoly to some separate power companies and meets EU requirements to an internal electricity market. The main issues of reforms: transparency of costs, commercial relations in power sector, fulfilment of the Electricity Directive 96/92/EU. The Lithuanian electricity market is small and inefficient. Current reforms of a power sector are directed to create the common Baltic electricity market. (author)

  9. Angular momentum and energy spread measurements by backscattering technique

    CERN Document Server

    Belyaev, Grigory

    A main interest in the design of a high-intensity particle beam accelerator as the EURISOL driver is the control of the particle losses in the vacuum chamber. These losses, even concerning an extremely low fraction of the beam (10-4-10-7), can be sufficient to considerably complicate the maintenance of such an accelerator. Within this framework and in order to contribute to accelerator projects dedicated to rare isotope physics, the CEA is undertaking a research program on the theoretical and experimental study of the physical processes involved in halo formation around a high intensity beam in a particle accelerator. This research program is performed in collaboration with several French and international laboratories.This note details the principle and the design of an innovative emittance measurement unit which aims to be “weakly” interceptive. “Weakly” means that the beam can continue to propagate in the pipe with similar properties compared to the case when the diagnostic is not inserted. It is p...

  10. Cloud computing platform for real-time measurement and verification of energy performance

    International Nuclear Information System (INIS)

    Ke, Ming-Tsun; Yeh, Chia-Hung; Su, Cheng-Jie

    2017-01-01

    Highlights: • Application of PSO algorithm can improve the accuracy of the baseline model. • M&V cloud platform automatically calculates energy performance. • M&V cloud platform can be applied in all energy conservation measures. • Real-time operational performance can be monitored through the proposed platform. • M&V cloud platform facilitates the development of EE programs and ESCO industries. - Abstract: Nations worldwide are vigorously promoting policies to improve energy efficiency. The use of measurement and verification (M&V) procedures to quantify energy performance is an essential topic in this field. Currently, energy performance M&V is accomplished via a combination of short-term on-site measurements and engineering calculations. This requires extensive amounts of time and labor and can result in a discrepancy between actual energy savings and calculated results. In addition, the M&V period typically lasts for periods as long as several months or up to a year, the failure to immediately detect abnormal energy performance not only decreases energy performance, results in the inability to make timely correction, and misses the best opportunity to adjust or repair equipment and systems. In this study, a cloud computing platform for the real-time M&V of energy performance is developed. On this platform, particle swarm optimization and multivariate regression analysis are used to construct accurate baseline models. Instantaneous and automatic calculations of the energy performance and access to long-term, cumulative information about the energy performance are provided via a feature that allows direct uploads of the energy consumption data. Finally, the feasibility of this real-time M&V cloud platform is tested for a case study involving improvements to a cold storage system in a hypermarket. Cloud computing platform for real-time energy performance M&V is applicable to any industry and energy conservation measure. With the M&V cloud platform, real

  11. Measurements of energy distribution and wall temperature in flowing hydrogen microwave plasma systems

    Science.gov (United States)

    Chapman, R.; Finzel, M.; Hawley, M. C.

    1985-01-01

    An electrothermal propulsion concept utilizing a microwave plasma system as the mechanism to convert electromagnetic energy into translational energy of the flowing gas is being investigated. A calorimetric experimental system has been designed and built enclosing the microwave plasma system to accurately determine the net energy transferred to the flowing gas. For a flow rate of 8900 micromoles/sec, a pressure of 7.4 torr, and an absorbed power level of 80 W, an energy transfer efficiency of 50 percent has been measured. A heat transfer model that characterizes the energy transfer processes in the plasma is developed. A wall temperature for the plasma system is calculated.

  12. 10 CFR Appendix U to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Ceiling Fans

    Science.gov (United States)

    2010-01-01

    ... of Ceiling Fans U Appendix U to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION... Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Ceiling Fans 1. Scope. This appendix covers the test requirements used to measure the energy performance of ceiling fans. 2...

  13. Energy Consumption Model and Measurement Results for Network Coding-enabled IEEE 802.11 Meshed Wireless Networks

    DEFF Research Database (Denmark)

    Paramanathan, Achuthan; Rasmussen, Ulrik Wilken; Hundebøll, Martin

    2012-01-01

    This paper presents an energy model and energy measurements for network coding enabled wireless meshed networks based on IEEE 802.11 technology. The energy model and the energy measurement testbed is limited to a simple Alice and Bob scenario. For this toy scenario we compare the energy usages...

  14. Assessing drivers and barriers of energy-saving measures in Oklahoma’s public schools

    International Nuclear Information System (INIS)

    Castleberry, Becca; Gliedt, Travis; Greene, J. Scott

    2016-01-01

    Implementing energy conservation initiatives within public schools, including both behavioral changes as well as building retrofits, can generate cost saving and educational benefits. However, the level of energy efficiency improvements that can be achieved may depend on the socio-economic characteristics of the school or the underlying district. The purpose of this research is to identify and examine the factors that have a role in influencing the adoption of energy-saving practices and/or building retrofits within Oklahoma’s public schools. In order to investigate these factors, a survey was administered to public school administrators across the state. The results illustrate different factors that drive schools to make decisions associated with energy conservation and retrofitting efforts. A comparative analysis between different types of schools (e.g., rural vs. urban, low- vs. high-income) was also conducted to discover the combination of characteristics that are associated with energy-saving measures. The findings could help school administrators and teachers understand how they might adopt new behaviors or technologies. - Highlights: • Energy performance improvements depend on characteristics of a school district. • Districts with environmental science classes more likely to take energy measures. • Cost savings motivated energy measures in high-income/large-population districts. • A cluster analysis revealed geographic patterns of energy saving measures.

  15. Rethinking the measurement of energy poverty in Europe: A critical analysis of indicators and data.

    Science.gov (United States)

    Thomson, Harriet; Bouzarovski, Stefan; Snell, Carolyn

    2017-08-01

    Energy poverty - which has also been recognised via terms such as 'fuel poverty' and 'energy vulnerability' - occurs when a household experiences inadequate levels of energy services in the home. Measuring energy poverty is challenging, as it is a culturally sensitive and private condition, which is temporally and spatially dynamic. This is compounded by the limited availability of appropriate data and indicators, and lack of consensus on how energy poverty should be conceptualised and measured. Statistical indicators of energy poverty are an important and necessary part of the research and policy landscape. They carry great political weight, and are often used to guide the targeting of energy poverty measures - due to their perceived objectivity - with important consequences for both the indoor and built environment of housing. Focussing on the European Union specifically, this paper critically assesses the available statistical options for monitoring energy poverty, whilst also presenting options for improving existing data. This is examined through the lens of vulnerability thinking, by considering the ways in which policies and institutions, the built fabric and everyday practices shape energy use, alongside the manner in which energy poor households experience and address the issue on a day-to-day basis.

  16. Rethinking the measurement of energy poverty in Europe: A critical analysis of indicators and data

    Science.gov (United States)

    Bouzarovski, Stefan; Snell, Carolyn

    2017-01-01

    Energy poverty – which has also been recognised via terms such as ‘fuel poverty’ and ‘energy vulnerability’ – occurs when a household experiences inadequate levels of energy services in the home. Measuring energy poverty is challenging, as it is a culturally sensitive and private condition, which is temporally and spatially dynamic. This is compounded by the limited availability of appropriate data and indicators, and lack of consensus on how energy poverty should be conceptualised and measured. Statistical indicators of energy poverty are an important and necessary part of the research and policy landscape. They carry great political weight, and are often used to guide the targeting of energy poverty measures – due to their perceived objectivity – with important consequences for both the indoor and built environment of housing. Focussing on the European Union specifically, this paper critically assesses the available statistical options for monitoring energy poverty, whilst also presenting options for improving existing data. This is examined through the lens of vulnerability thinking, by considering the ways in which policies and institutions, the built fabric and everyday practices shape energy use, alongside the manner in which energy poor households experience and address the issue on a day-to-day basis. PMID:28919837

  17. Assessment of physical activity and energy expenditure: an overview of objective measures

    Directory of Open Access Journals (Sweden)

    Andrew P Hills

    2014-06-01

    Full Text Available The ability to assess energy expenditure and estimate physical activity in free-living individuals is extremely important in the global context of non-communicable diseases including malnutrition, overnutrition (obesity and diabetes. It is also important to appreciate that physical activity and energy expenditure are different constructs with physical activity defined as any bodily movement that results in energy expenditure and accordingly, energy is expended as a result of physical activity. However, total energy expenditure, best assessed using the criterion doubly labelled water technique, includes components in addition to physical activity energy expenditure, namely resting energy expenditure and the thermic effect of food. Given the large number of assessment techniques currently used to estimate physical activity in humans, it is imperative to understand the relative merits of each. The goal of this review is to provide information on the utility and limitations of a range of objective measures of physical activity and their relationship with energy expenditure. The measures discussed include those based on energy expenditure or oxygen uptake including doubly labelled water, activity energy expenditure, physical activity level, and metabolic equivalent; those based on heart rate monitoring and motion sensors; and because of their widespread use, selected subjective measures.

  18. Competitive effects and instruments of power sector reforms. International reform concepts blockade structures, risk distribution. A political economy analysis

    International Nuclear Information System (INIS)

    Liebchen, Armin

    2014-01-01

    Power sectors with weak or inadequate competition structures are the rule, despite numerous attempts at reform. But can afford modern economies this defect for a long time? Why can the implementation of competition are blocked so effectively? The author studied international reform experiences and opens up interesting insights that can also reflect on problems of the German energy turnaround: The difficulty of timing and coordination of the reform components, the development of resistance levels of individual interest groups, breach of contract as a rational alternative, causes unwanted price effects, shifting interest situations of major stakeholders, change dynamics impending regulatory risks, pending financing risks, stranded cost-conflict situations for power stations disconnected from the grid and facilities and instruments of a political and regulatory risk management for reforms. With numerous examples, background analyzes and instruments to reform analysis, this book is aimed at investors, policy planners and analysts. [de

  19. Measurement of sound power and absorption in reverberation chambers using energy density.

    Science.gov (United States)

    Nutter, David B; Leishman, Timothy W; Sommerfeldt, Scott D; Blotter, Jonathan D

    2007-05-01

    Reverberation chamber measurements typically rely upon spatially averaged squared pressure for the calculation of sound absorption, sound power, and other acoustic values. While a reverberation chamber can provide an approximately diffuse sound field, variations in sound pressure consistently produce uncertainty in measurement results. This paper explores the benefits of using total energy density or squared particle velocity magnitude (kinetic energy density) instead of squared pressure (potential energy density) for sound absorption and sound power measurements. The approaches are based on methods outlined in current ISO standards. The standards require a sufficient number of source-receiver locations to obtain suitable measurement results. The total and kinetic energy densities exhibit greater spatial uniformity at most frequencies than potential energy density, thus requiring fewer source-receiver positions to produce effective results. Because the total energy density is typically the most uniform of the three quantities at low frequencies, its use could also impact the usable low-frequency ranges of reverberation chambers. In order to employ total and kinetic energy densities for sound absorption measurements, relevant energy-based impulse responses were developed as part of the work for the assessment of sound field decays.

  20. Methodological possibilities for using the electron and ion energy balance in thermospheric complex measurements

    International Nuclear Information System (INIS)

    Serafimov, K.B.; Serafimova, M.K.

    1991-01-01

    Combination of ground based measurements for determination of basic thermospheric characteristics is proposed . An expression for the energy transport between components of space plasma is also derived and discussed within the framework of the presented methodology which could be devided into the folowing major sections: 1) application of ionosonde, absorption measurements, TEC-measurements using Faradey radiation or the differential Doppler effect; 2) ground-based airglow measurements; 3) airglow and palsma satelite measurements. 9 refs