WorldWideScience

Sample records for energy reduction cer

  1. EUA and sCER phase II price drivers: Unveiling the reasons for the existence of the EUA-sCER spread

    Energy Technology Data Exchange (ETDEWEB)

    Mansanet-Bataller, Maria, E-mail: maria.mansanet@uv.e [Climate Economics Chair (CEC), Paris (France); University of Valencia, Valencia (Spain); CDC Climat Research (France); Chevallier, Julien, E-mail: julien.chevallier@dauphine.f [Universite Paris-Dauphine (CGEMP/LEDa) (France); Herve-Mignucci, Morgan, E-mail: morgan.herve-mignucci@CPIVenice.or [CDC Climat Research (France); Climate Policy Initiative, Venice (Italy); Alberola, Emilie, E-mail: emilie.alberola@ccdcclimat.co [CDC Climat Research (France); Chair Energy and Finance, HEC Business School (France)

    2011-03-15

    This article studies the price relationships between EU emissions allowances (EUAs) - valid under the EU Emissions Trading Scheme (EU ETS) - and secondary Certified Emissions Reductions (sCERs)-established from primary CERs generated through the Kyoto Protocol's Clean Development Mechanism (CDM). Given the price differences between EUAs and sCERs, financial and industrial operators may benefit from arbitrage strategies by buying sCERs and selling EUAs (i.e. selling the EUA-sCER spread) to cover their compliance position as industrial operators are allowed to use sCERs towards compliance with their emissions cap within the European system up to 13.4%. Our central results show that the spread is mainly driven by EUA prices and market microstructure variables and less importantly, as we would expect, by emissions-related fundamental drivers. This might be justified by the fact that the EU ETS remains the greatest source of CER demand to date. - Research Highlights: {yields} This paper provides a thorough analysis of Phase II drivers for EUAs and CERs. {yields} The empirical results show that the EUA-sCER spread shares some of the drivers for EUAs and CERs. {yields} Most importantly, the EUA-sCER spread is found to be explained by microstructure variables. {yields} Therefore, the paper suggests that the EUA-sCER spread is mainly used for arbitrage purposes.

  2. EUA and sCER phase II price drivers: Unveiling the reasons for the existence of the EUA-sCER spread

    International Nuclear Information System (INIS)

    Mansanet-Bataller, Maria; Chevallier, Julien; Herve-Mignucci, Morgan; Alberola, Emilie

    2011-01-01

    This article studies the price relationships between EU emissions allowances (EUAs) - valid under the EU Emissions Trading Scheme (EU ETS) - and secondary Certified Emissions Reductions (sCERs)-established from primary CERs generated through the Kyoto Protocol's Clean Development Mechanism (CDM). Given the price differences between EUAs and sCERs, financial and industrial operators may benefit from arbitrage strategies by buying sCERs and selling EUAs (i.e. selling the EUA-sCER spread) to cover their compliance position as industrial operators are allowed to use sCERs towards compliance with their emissions cap within the European system up to 13.4%. Our central results show that the spread is mainly driven by EUA prices and market microstructure variables and less importantly, as we would expect, by emissions-related fundamental drivers. This might be justified by the fact that the EU ETS remains the greatest source of CER demand to date. - Research Highlights: → This paper provides a thorough analysis of Phase II drivers for EUAs and CERs. → The empirical results show that the EUA-sCER spread shares some of the drivers for EUAs and CERs. → Most importantly, the EUA-sCER spread is found to be explained by microstructure variables. → Therefore, the paper suggests that the EUA-sCER spread is mainly used for arbitrage purposes.

  3. Implementing CER: what will it take?

    Science.gov (United States)

    Biskupiak, Joseph E; Dunn, Jeffrey D; Holtorf, Anke-Peggy

    2012-06-01

    Comparative effectiveness research (CER) is undeniably changing how drugs are developed, launched, priced, and reimbursed in the United States. But most organizations are still evaluating what CER can do for them and how and when they can utilize the data. A roundtable of stakeholders, including formulary decision makers, evaluated CER's possible effects on managed care organizations (MCOs) and what it may take to fully integrate CER into decision making. To examine the role of CER in current formulary decision making, compare CER to modeling, discuss ways CER may be used in the future, and describe CER funding sources. While decision makers from different types of organizations, such as pharmacy benefit management (PBM) companies and MCOs, may have varying definitions and expectations of CER, most thought leaders from a roundtable of stakeholders, including formulary decision makers, see value in CER's ability to enhance their formulary decision making. Formulary decision makers may be able to use CER to better inform their coverage decisions in areas such as benefit design, contracting, conditional reimbursement, pay for performance, and other alternative pricing arrangements. Real-world CER will require improvement in the health information technology infrastructure to better capture value-related information. The federal government is viewed as a key driver and funding source behind CER, especially for infrastructure and methods development, while industry will adapt the clinical development and create increasing CER evidence. CER then needs to be applied to determining value (or cost efficacy). It is expected that CER will continue to grow as a valuable component of formulary decision making. Future integration of CER into formulary decision making will require federal government and academic leadership, improvements in the health information technology infrastructure, ongoing funding, and improved and more consistent methodologies.

  4. Electrochemical reduction of CerMet fuels for transmutation using surrogate CeO2-Mo pellets

    Science.gov (United States)

    Claux, B.; Souček, P.; Malmbeck, R.; Rodrigues, A.; Glatz, J.-P.

    2017-08-01

    One of the concepts chosen for the transmutation of minor actinides in Accelerator Driven Systems or fast reactors proposes the use of fuels and targets containing minor actinides oxides embedded in an inert matrix either composed of molybdenum metal (CerMet fuel) or of ceramic magnesium oxide (CerCer fuel). Since the sufficient transmutation cannot be achieved in a single step, it requires multi-recycling of the fuel including recovery of the not transmuted minor actinides. In the present work, a pyrochemical process for treatment of Mo metal inert matrix based CerMet fuels is studied, particularly the electroreduction in molten chloride salt as a head-end step required prior the main separation process. At the initial stage, different inactive pellets simulating the fuel containing CeO2 as minor actinide surrogates were examined. The main studied parameters of the process efficiency were the porosity and composition of the pellets and the process parameters as current density and passed charge. The results indicated the feasibility of the process, gave insight into its limiting parameters and defined the parameters for the future experiment on minor actinide containing material.

  5. 78 FR 32385 - Exelon Generation Company, LLC; CER Generation II, LLC; Constellation Mystic Power, LLC...

    Science.gov (United States)

    2013-05-30

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. EL13-64-000] Exelon Generation Company, LLC; CER Generation II, LLC; Constellation Mystic Power, LLC; Constellation NewEnergy...) Rules of Practice and Procedure, 18 CFR 385.207, Exelon Generation Company, LLC, CER Generation II, LLC...

  6. Looking at CER from Medicare's perspective.

    Science.gov (United States)

    Mohr, Penny

    2012-05-01

    Comparative effectiveness research (CER) is rapidly adding to the amount of data available to health care coverage and payment decision makers. Medicare's decisions have a large effect on coverage and reimbursement policies throughout the health insurance industry and will likely influence the entire U.S. health care system; thus, examining its role in integrating CER into policy is crucial. To describe the potential benefits of CER to support payment and coverage decisions in the Medicare program, limitations on its use,the role of the Centers for Medicare & Medicaid Services (CMS) in improving the infrastructure for CER, and to discuss challenges that must be addressed to integrate CER into CMS's decision-making process. A defining feature of CER is that it provides the type of evidence that will help decision makers, such as patients, clinicians, and payers,make more informed treatment and policy decisions. Because CMS is responsible for more than 47 million elderly and disabled beneficiaries, the way that Medicare uses CER has the potential to have a large impact on public and individual health. Currently many critical payment and coverage decisions within the Medicare program are made on the basis of poor quality evidence, and CER has the potential to greatly improve the quality of decision making. Despite common misconceptions, CMS is not prohibited by law from using CER apart from some reasonable limitations. CMS is,however, required to support the development of the CER infrastructure by making their data more readily available to researchers. While CER has substantial potential to improve the quality of the agency's policy decisions,challenges remain to integrate CER into Medicare's processes. These challenges include statutory ambiguities, lack of sufficient staff and internal resources to take advantage of CER, and the lack of an active voice in setting priorities for CER and study design. Although challenges exist, CER has the potential to greatly

  7. Non-clinical development of CER-001.

    Science.gov (United States)

    Barbaras, Ronald

    2015-01-01

    Cardiovascular disease remains the most pressing healthcare issue for the developed world and is becoming so for developing countries. There are no currently approved therapies that can rapidly reduce the burden of unstable, inflamed plaque in the overall coronary vascular bed. High-density lipoprotein (HDL) has multiple actions that could lead to plaque stabilization, such as rapid removal of large quantities of cholesterol from the vasculature through the process of reverse lipid transport, improvement in endothelial function, protection against oxidative damage, and reduction in inflammation. Short-term infusion of HDL-mimetics in animal models as well as in humans has shown promising effects on the plaque size and morphology. Cerenis Therapeutics has developed CER-001, a negatively charged lipoprotein complex consisting of phospholipid and recombinant human apoA-I that mimics the structure and function of natural HDL. Three clinical trials using CER-001 infusions have demonstrated improvements in the carotid wall thickness of patients with familial hypercholesterolaemia and in patients with hypo-alphalipoproteinaemia, as well as an impact on coronary plaque burden measured by intravascular ultrasonography at the lowest tested dose (3 mg/kg) in post-ACS patients. Here, we reviewed the non-clinical data leading to the demonstration that CER-001 is a full HDL mimetic.

  8. An eceriferum locus, cer-zv, is associated with a defect in cutin responsible for water retention in barley (Hordeum vulgare) leaves.

    Science.gov (United States)

    Li, Chao; Wang, Aidong; Ma, Xiaoying; Pourkheirandish, Mohammad; Sakuma, Shun; Wang, Ning; Ning, Shunzong; Nevo, Eviatar; Nawrath, Christiane; Komatsuda, Takao; Chen, Guoxiong

    2013-03-01

    Drought limits plant growth and threatens crop productivity. A barley (Hordeum vulgare) ethylene imine-induced monogenic recessive mutant cer-zv, which is sensitive to drought, was characterized and genetically mapped in the present study. Detached leaves of cer-zv lost 34.2 % of their initial weight after 1 h of dehydration. The transpiration was much higher in cer-zv leaves than in wild-type leaves under both light and dark conditions. The stomata of cer-zv leaves functioned normally, but the cuticle of cer-zv leaves showed increased permeability to ethanol and toluidine blue dye. There was a 50-90 % reduction in four major cutin monomers, but no reduction in wax loads was found in the cer-zv mutant as compared with the wild type. Two F(2) mapping populations were established by the crosses of 23-19 × cer-zv and cer-zv × OUH602. More polymorphisms were found in EST sequences between cer-zv and OUH602 than between cer-zv and 23-19. cer-zv was located in a pericentromeric region on chromosome 4H in a 10.8 cM interval in the 23-19 × cer-zv map based on 186 gametes tested and a 1.7 cM interval in the cer-zv × OUH602 map based on 176 gametes tested. It co-segregated with EST marker AK251484 in both maps. The results indicated that the cer-zv mutant is defective in cutin, which might be responsible for the increased transpiration rate and drought sensitivity, and that the F(2) of cer-zv × OUH602 might better facilitate high resolution mapping of cer-zv.

  9. La industria cerámica brasileña

    Directory of Open Access Journals (Sweden)

    Pacheco Jordao, M. A.

    2001-02-01

    Full Text Available Ceramics play an important role in the Brazilian economy, with a participation estimated in 1% of the GNP ( Gross National Product, corresponding to about 6 billion dollars. The abundance of natural raw-materials, alternative energy sources, and the availability of practical technologies within the industrial equipments, caused a rapid evolution of the Brazilian industries, and several types of products from the various ceramic segments attained international quality levels, with significative exportation. He ceramic sector is very diverse and can be divided into the following classes: heavy clay ceramics, wall and floor tiles, refractory materials, sanitary ware, porcelain electric insulators, tableware, decorative china, ceramic filters and reservoirs for domestic use, technical ceramics, and thermal insulators. All these segments exist in Brazil, in a higher or lower stage of development and production capacity. Moreover, there are also manufacturers of synthetic glazes and colorants, plaster of paris, equipments and some auxiliary chemicals. In this paper, an overview of the main Brazilian ceramic segments is presented, excluding the glass, cement, and lime sectors, which, despite being ceramic, are generally treated in separate.

    La cerámica juega un papel muy importante para la economía del país brasileño con una participación en el P.I.B (Producto Interior Bruto estimado en el 1%, correspondiendo a cerca de 6 millones de dólares. La abundancia de materias primas naturales, fuentes alternativas de energía y una amplia tecnología incorporada a los equipos industriales, han hecho que las industrias brasileñas evolucionasen rápidamente de forma que muchos tipos de productos de diferentes segmentos de la actividad cerámica alcanzasen niveles de calidad mundial, con cifras apreciables destinadas a la exportación. El sector industrial de la cerámica incluye producciones muy diversificados y puede ser dividido en los siguientes

  10. Compensatory mechanisms activated with intermittent energy restriction

    DEFF Research Database (Denmark)

    Coutinho, Sílvia Ribeiro; Halset, Eline Holli; Gåsbakk, Sigrid

    2018-01-01

    Background & aims: Strong compensatory responses, with reduced resting metabolic rate (RMR), increased exercise efficiency (ExEff) and appetite, are activated when weight loss (WL) is achieved with continuous energy restriction (CER), which try to restore energy balance. Intermittent energy...... restriction (IER), where short spells of energy restriction are interspaced by periods of habitual energy intake, may offer some protection in minimizing those responses. We aimed to compare the effect of IER versus CER on body composition and the compensatory responses induced by WL. Methods: 35 adults (age......: 39 ± 9 y) with obesity (BMI: 36 ± 4 kg/m2) were randomized to lose a similar weight with an IER (N = 18) or a CER (N = 17) diet over a 12 week period. Macronutrient composition and overall energy restriction (33% reduction) were similar between groups. Body weight/composition, RMR, fasting...

  11. HDL mimetic peptide CER-522 treatment regresses left ventricular diastolic dysfunction in cholesterol-fed rabbits.

    Science.gov (United States)

    Merlet, Nolwenn; Busseuil, David; Mihalache-Avram, Teodora; Mecteau, Melanie; Shi, Yanfen; Nachar, Walid; Brand, Genevieve; Brodeur, Mathieu R; Charpentier, Daniel; Rhainds, David; Sy, Gavin; Schwendeman, Anna; Lalwani, Narendra; Dasseux, Jean-Louis; Rhéaume, Eric; Tardif, Jean-Claude

    2016-07-15

    High-density lipoprotein (HDL) infusions induce rapid improvement of experimental atherosclerosis in rabbits but their effect on ventricular function remains unknown. We aimed to evaluate the effects of the HDL mimetic peptide CER-522 on left ventricular diastolic dysfunction (LVDD). Rabbits were fed with a cholesterol- and vitamin D2-enriched diet until mild aortic valve stenosis and hypercholesterolemia-induced LV hypertrophy and LVDD developed. Animals then received saline or 10 or 30mg/kg CER-522 infusions 6 times over 2weeks. We performed serial echocardiograms and LV histology to evaluate the effects of CER-522 therapy on LVDD. LVDD was reduced by CER-522 as shown by multiple parameters including early filling mitral deceleration time, deceleration rate, Em/Am ratio, E/Em ratio, pulmonary venous velocities, and LVDD score. These findings were associated with reduced macrophages (RAM-11 positive cells) in the pericoronary area and LV, and decreased levels of apoptotic cardiomyocytes in CER-522-treated rabbits. CER-522 treatment also resulted in decreased atheromatous plaques and internal elastic lamina area in coronary arteries. CER-522 improves LVDD in rabbits, with reductions of LV macrophage accumulation, cardiomyocyte apoptosis, coronary atherosclerosis and remodelling. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  12. CER-001, a HDL-mimetic, stimulates the reverse lipid transport and atherosclerosis regression in high cholesterol diet-fed LDL-receptor deficient mice.

    Science.gov (United States)

    Tardy, Claudine; Goffinet, Marine; Boubekeur, Nadia; Ackermann, Rose; Sy, Gavin; Bluteau, Alice; Cholez, Guy; Keyserling, Constance; Lalwani, Narendra; Paolini, John F; Dasseux, Jean-Louis; Barbaras, Ronald; Baron, Rudi

    2014-01-01

    CER-001 is a novel engineered HDL-mimetic comprised of recombinant human apoA-I and phospholipids that was designed to mimic the beneficial properties of nascent pre-β HDL. In this study, we have evaluated the capacity of CER-001 to perform reverse lipid transport in single dose studies as well as to regress atherosclerosis in LDLr(-/-) mice after short-term multiple-dose infusions. CER-001 induced cholesterol efflux from macrophages and exhibited anti-inflammatory response similar to natural HDL. Studies with HUVEC demonstrated CER-001 at a concentration of 500 μg/mL completely suppressed the secretion of cytokines IL-6, IL-8, GM-CSF and MCP-1. Following infusion of CER-001 (10mg/kg) in C57Bl/6J mice, we observed a transient increase in the mobilization of unesterified cholesterol in HDL particles containing recombinant human apoA-I. Finally we show that cholesterol elimination was stimulated in CER-001 treated animals as demonstrated by the increased cholesterol concentration in liver and feces. In a familial hypercholesterolemia mouse model (LDL-receptor deficient mice), the infusion of CER-001 caused 17% and 32% reductions in plaque size, 17% and 23% reductions in lipid content after 5 and 10 doses given every 2 days, respectively. Also, there was an 80% reduction in macrophage content in the plaque following 5 doses, and decreased VCAM-1 expression by 16% and 22% in the plaque following 5 and 10 intravenous doses of CER-001, respectively. These data demonstrate that CER-001 rapidly enhances reverse lipid transport in the mouse, reducing vascular inflammation and promoting regression of diet-induced atherosclerosis in LDLr(-/-) mice upon a short-term multiple dose treatment. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  13. Costs of certified emission reductions under the Clean Development Mechanism of the Kyoto Protocol

    International Nuclear Information System (INIS)

    Rahman, Shaikh M.; Kirkman, Grant A.

    2015-01-01

    This paper examines the cost structure of certified emission reductions (CERs) through various types of projects under the Clean Development Mechanism (CDM) of the Kyoto Protocol. Using the CDM project data, the costs of CERs and their variation across technology and over time and space are estimated by applying alternative functional forms and specifications. Results show that the average cost of CERs decreases with the project scale and duration, scale and duration effects significantly vary across project types, and there is an upward trend in costs. The results also show that the distribution of the projects in the CDM portfolio or a given location does not strictly follow the relative cost structure, nor does the distribution of the CDM projects in different host countries follow the principle of comparative advantage. More than 84% of the CDM portfolio consists of various energy projects with substantially higher costs of CERs than afforestation and reforestation, industrial and landfill gas reduction, and methane avoidance projects, which are only 12% of all projects. While per unit cost of abatement plays an important role in the bottom-up and top-down models to evaluate emission reduction potential and analyze policy alternatives, the findings contradict the presumption of such models that project investors seek out low-cost opportunities. At the aggregate level, the cost of CER by the projects in Asia and Europe is similar but higher than those hosted in Africa, Americas, and Oceania. Yet more than 83% of the projects in the CDM portfolio are located in Asia; more than 69% of the projects are in China and India alone. China appears to have a comparative advantage (i.e., lowest opportunity cost) in energy efficiency projects, while India has a comparative advantage in hydro power projects and Brazil has a comparative advantage in wind power projects. In contrast, energy efficiency category accounts for only 8% of the CDM projects in China, hydro power

  14. Looking at CER from the pharmaceutical industry perspective.

    Science.gov (United States)

    Dubois, Robert W

    2012-05-01

    Comparative effectiveness research (CER) is increasing as an element of health care reform in the United States. By comparing drugs against other drugs or other therapies instead of just to placebo, CER has the potential to improve decisions about the appropriate treatment for patients. But the growth of CER also brings an array of questions and decisions for purchasers and policy makers that will not be easy to answer and which require significant dialogue to fully understand and address. To describe some of the impact, both positive and negative, that comparative effectiveness research (CER) may have on the pharmaceutical industry. As CER data proliferate, questions are being raised about who can access the data, who can discuss it, and in what forums. Regulations place different communication restrictions on the pharmaceutical industry than on other health care stakeholders, which creates a potential inequality. Another CER consideration will be the tendency to apply average results to individuals, even if not every individual experiences the average result. Policy makers should implement CER findings carefully with a goal toward accommodating flexibility. A final impact to consider is whether greater expectations for CER will have a negative or positive effect on incentives for drug innovation. In some cases, CER may increase development costs or decrease market size. In other cases, better targeting of trial populations could result in lower development costs. The rising expectations and growth in CER raise questions about information access, communication restrictions, flexible implementation policies, and incentives for innovation. Members of the pharmaceutical industry should be cognizant of the questions and should be participating in dialogues now to pave the way for future solutions.

  15. The ARRA investment in CER: a description of the midstream evaluation and how the funds were allocated and CER priorities addressed.

    Science.gov (United States)

    Esposito, Dominick; Yong, Pierre L; Rich, Eugene; Geonnotti, Kristin; Kimmey, Laura D

    2014-11-01

    To describe the evaluation design of the American Recovery and Reinvestment Act of 2009 comparative effectiveness research (CER) investment, how funds were allocated and how CER priorities were addressed. Primary and secondary data included information from redacted project proposals, an investigator survey and federal project officers, investigators and expert panel discussions. More than 420 projects (US$1.1 billion) were awarded. Those generating new or synthesizing existing CER made up the plurality (194, or US$524 million). Data infrastructure projects were the second-largest area (28%, US$302 million). More than three-fourths addressed at least one priority population, condition category or intervention category. These investments expanded the nation's CER activities and its future capacity to conduct CER.

  16. The Multi-Frequency Correlation Between Eua and sCER Futures Prices: Evidence from the Emd Approach

    Science.gov (United States)

    Zhang, Yue-Jun; Huang, Yi-Song

    2015-05-01

    Currently European Union Allowances (EUA) and secondary Certified Emission Reduction (sCER) have become two dominant carbon trading assets for investors and their linkage attracts much attention from academia and practitioners in recent years. Under this circumstance, we use the empirical mode decomposition (EMD) approach to decompose the two carbon futures contract prices and discuss their correlation from the multi-frequency perspective. The empirical results indicate that, first, the EUA and sCER futures price movements can be divided into those triggered by the long-term, medium-term and short-term market impacts. Second, the price movements in the EUA and sCER futures markets are primarily caused by the long-term impact, while the short-term impact can only explain a small fraction. Finally, the long-term (short-term) effect on EUA prices is statistically uncorrelated with the short-term (long-term) effect of sCER prices, and there is a medium or strong lead-and-lag correlation between the EUA and sCER price components with the same time scales. These results may provide some important insights of price forecast and arbitraging activities for carbon futures market investors, analysts and regulators.

  17. CERES ERBE-like Instantaneous TOA Estimates (ES-8) in HDF (CER_ES4_TRMM-PFM_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-4 is also produced for combinations of scanner instruments. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The following CERES ES4 data sets are currently available: CER_ES4_FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition2 CER_ES4_PFM+FM1_Edition1 CER_ES4_PFM+FM2_Edition1 CER_ES4_TRMM-PFM_Edition1 CER_ES4_TRMM-PFM_Edition2 CER_ES4_Terra-FM1_Edition1 CER_ES4_Terra-FM2_Edition1 CER_ES4_FM1+FM2_Edition2 CER_ES4_Terra-FM1_Edition2 CER_ES4_Terra-FM2_Edition2 CER_ES4_Aqua-FM3_Edition1 CER_ES4_Aqua-FM4_Edition1 CER_ES4_FM1+FM2+FM3+FM4_Edition1 CER_ES4_Aqua-FM3_Edition2 CER_ES4_Aqua-FM4_Edition2 CER_ES4_FM1+FM3_Edition2 CER_ES4_FM1+FM4_Edition2 CER_ES4_PFM+FM1_Edition2 CER_ES4_PFM+FM2_Edition2 CER_ES4_Aqua-FM3_Edition1-CV CER_ES4_Aqua-FM4_Edition1-CV CER_ES4_Terra-FM1_Edition1-CV CER_ES4_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=1998-08-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=2.5 degree; Longitude_Resolution=2.5 degree; Horizontal

  18. Evolución hacia la cerámica fotovoltaica

    Directory of Open Access Journals (Sweden)

    Sánchez-Muñoz, L.

    2011-02-01

    Full Text Available Nowadays there are two types of ceramic materials, i.e. traditional and advanced. The origin and development of the first one occurred before the revolutionary changes in Science and Technology of the nineteenth century, while the second one is its direct consequence. The traditional ceramics, which are related primarily to elementary human needs, in particular its constructions, is very homogeneous with respect to their formulations, being their diversity mainly linked to the decorative aspects of one surface. Advanced ceramics are characterized by a wide variety of materials with specific physical and chemical responses to radiation and electromagnetic fields, where major economic benefits are mainly related to secondary human needs such as telecommunications. As a result of the current global crisis, traditional buildings could be rehabilitated and/or replaced by energy efficient buildings, also called zero-energy buildings. In them there is a balance between energy consumed and produced “in situ”, and also using environmentally friendly materials. The direct consequence of this trend will be the evolution of ceramics by partial hybridization of its two ancestors, with special importance of semiconductor compounds, to the production of electrical energy as the basic objective, in this work called photovoltaic ceramics.

    Actualmente se distinguen dos tipos de cerámica, una tradicional y otra avanzada. El origen y desarrollo de la primera es anterior a los cambios revolucionarios en Ciencia y Tecnológica del siglo XIX, mientras que la segunda es su consecuencia directa. La cerámica tradicional, que está relacionada sobre todo con las necesidades humanas primarias y en particular a sus construcciones, es muy homogénea respecto a sus formulaciones, estando su diversidad ligada principalmente a los aspectos decorativos de una de sus superficies. La cerámica avanzada se caracteriza por una gran diversidad de materiales con

  19. Ecoprep: la preparación rentable de masas cerámicas

    Directory of Open Access Journals (Sweden)

    Gerl, S.

    2012-04-01

    Full Text Available Ecoprep (Economic Preparation is the sustainable technology for preparing ceramic bodies with a minimum consumption of resources. It has a huge impact on the energy balance and eliminates the need for additives to generate a high-quality slip to make granules. In consequence Ecoprep delivers a significant reduction in production costs, bringing an investment in this technology to the break-even point after a very short time. Reduction in water consumption and additives and the use of new raw materials are other advantages that impulse the implementation of this production technology, as well as important reduction of CO2 emissions, contributing to meeting the goals of the Kyoto Protocol. In short: A technology already successfully applied in different industries for decades, that includes a compendium of measures based on saving reductions in a range from 66% (energy, water,… and 100% (additives, deflocculants, etc. and will mark the future in microgranulation processes also in the ceramic industry.

    Ecoprep (Economic Preparation es una tecnología para la preparación de masas cerámicas con un consumo mínimo de recursos. El balance de energía es afectado en gran medida, de forma que ya no se requieren aditivos para producir una barbotina de alta calidad con el único fin de obtener un granulado. De ésta forma, Ecoprep ofrece una reducción considerable de los costes de producción que permite la rápida amortización de la inversión en ésta tecnología. Reducción en consumo de agua y aditivos así como la utilización de nuevas materias primas son otras ventajas que impulsan la implantación de ésta novedosa tecnología de producción, así como una importante reducción en emisiones de CO2, contribuyendo así al cumplimiento de las metas del protocolo de Kyoto. En resumen: Una tecnología aplicada ya con éxito en diferentes industrias desde hace décadas, que incluye un compendio de medidas de ahorro basado en

  20. Looking at CER from the managed care organization perspective.

    Science.gov (United States)

    Cannon, H Eric

    2012-05-01

    The amount of available comparative effectiveness research (CER) is increasing, giving managed care organizations (MCOs) more information to use in decision making. However, MCOs may not be prepared to integrate this new and voluminous data into their current practices and policies. To describe ways that health care reform will affect MCO populations in the future, to examine examples of how MCOs have utilized CER data in the past, and to identify questions that MCOs will have to address as they integrate CER into future decision making. Unquestionably, health care reform will change the U.S. market. Millions more insured individuals will be making purchasing decisions. In addition, health care reform will mean more CER data will be available, affecting the decisions MCOs must make. In the past, MCOs may not have used CER as effectively as they could in making formulary and other policy decisions. However, there are examples that show how CER can be integrated effectively, such as Intermountain Healthcare's use of CER to create treatment guidelines, which have been shown to lower costs and improve delivery of care. In the future, MCOs will need to assess their own abilities to utilize CER, including their infrastructure of expertise, hardware, software, and protocols and processes. MCOs will also need to understand how pertinent CER is to their own needs, how it may affect benefit design, and how it will affect their customers' needs. Health care reform, and the resultant growth of CER, will have significant impact on MCOs, who will need to invest in better infrastructure and new understandings of a transforming market, changing customer bases, and evolving data.

  1. CERES ERBE-like Monthly Regional Averages (ES-9) in HDF (CER_ES9_TRMM-PFM_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Regional Averages (ES-9) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-9 is also produced for combinations of scanner instruments. All instantaneous shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-8 product for a month are sorted by 2.5-degree spatial regions, by day number, and by the local hour of observation. The mean of the instantaneous fluxes for a given region-day-hour bin is determined and recorded on the ES-9 along with other flux statistics and scene information. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The ES-9 also contains hourly average fluxes for the month and an overall monthly average for each region. These average fluxes are given for both clear-sky and total-sky scenes. The following CERES ES9 data sets are currently available: CER_ES9_FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition2 CER_ES9_PFM+FM1_Edition1 CER_ES9_PFM+FM2_Edition1 CER_ES9_PFM+FM1_Edition2 CER_ES9_PFM+FM2_Edition2 CER_ES9_TRMM-PFM_Edition1 CER_ES9_TRMM-PFM_Edition2 CER_ES9_Terra-FM1_Edition1 CER_ES9_Terra-FM2_Edition1 CER_ES9_FM1+FM2_Edition2 CER_ES9_Terra-FM1_Edition2 CER_ES9_Terra-FM2_Edition2 CER_ES9_Aqua-FM3_Edition1 CER_ES9_Aqua-FM4_Edition1 CER_ES9_FM1+FM2+FM3+FM4_Edition1 CER_ES9_Aqua-FM3_Edition2 CER_ES9_Aqua-FM4_Edition2 CER_ES9_FM1+FM3_Edition2 CER_ES9_FM1+FM4_Edition2 CER_ES9_Aqua-FM3_Edition1-CV CER_ES9_Aqua-FM4_Edition1-CV CER_ES9_Terra-FM1_Edition1-CV CER_ES9_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=1998-08-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost

  2. Comparative effectiveness research (CER): a summary of AHRQ's CER on therapies for rheumatoid arthritis.

    Science.gov (United States)

    Oderda, Gary M; Balfe, Lisa M

    2011-01-01

    In recent years, the U.S. government has designated funding of several large-scale initiatives for comparative effectiveness research (CER) in health care. The American Recovery and Reinvestment Act (ARRA) of 2009 apportioned more than $1 billion to support CER programs administered by the Department of Health and Human Services (DHHS), the National Institutes of Health (NIH), and the Agency for Healthcare Research and Quality (AHRQ). CER is generally defined as the undertaking of original research or systematic reviews of published literature in order to compare the benefits and risks of different approaches to preventing, diagnosing, or treating diseases. These approaches may include diagnostic tests, medications, medical devices, and surgeries. The overall goals of CER are to support informed health care decisions by patients, clinicians, payers, and policy makers and to apply its evidence to ultimately improve the quality, effectiveness, and efficiency of health care. To (a) provide managed care professionals with general definitions of CER, specifically as it is administered by AHRQ; (b) discuss the importance of CER to clinical and managed care pharmacists; and (c) summarize key methods and findings from AHRQ's 2007 comparative effectiveness review on therapies for rheumatoid arthritis (RA). As supported by AHRQ, CER is conducted in order to synthesize comprehensive evidence on the comparative benefits and harms of treatment interventions. The findings from comparative effectiveness reviews can thus contribute to informing therapeutic strategies and treatment decisions. In 2007, a multitude of RA treatment options and studies motivated AHRQ to commission a systematic comparative effectiveness review. Conducted by investigators at the RTI-University of North Carolina Evidence-Based Practice Center, the review included comparisons of synthetic disease-modifying antirheumatic drugs (DMARDs), biologic agents, synthetic DMARDs versus biologic agents, and various

  3. CERES ERBE-like Monthly Geographical Averages (ES-4) in HDF (CER_ES4_Aqua-FM4_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-4 is also produced for combinations of scanner instruments. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The following CERES ES4 data sets are currently available: CER_ES4_FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition2 CER_ES4_PFM+FM1_Edition1 CER_ES4_PFM+FM2_Edition1 CER_ES4_TRMM-PFM_Edition1 CER_ES4_TRMM-PFM_Edition2 CER_ES4_Terra-FM1_Edition1 CER_ES4_Terra-FM2_Edition1 CER_ES4_FM1+FM2_Edition2 CER_ES4_Terra-FM1_Edition2 CER_ES4_Terra-FM2_Edition2 CER_ES4_Aqua-FM3_Edition1 CER_ES4_Aqua-FM4_Edition1 CER_ES4_FM1+FM2+FM3+FM4_Edition1 CER_ES4_Aqua-FM3_Edition2 CER_ES4_Aqua-FM4_Edition2 CER_ES4_FM1+FM3_Edition2 CER_ES4_FM1+FM4_Edition2 CER_ES4_PFM+FM1_Edition2 CER_ES4_PFM+FM2_Edition2 CER_ES4_Aqua-FM3_Edition1-CV CER_ES4_Aqua-FM4_Edition1-CV CER_ES4_Terra-FM1_Edition1-CV CER_ES4_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-03-29] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=2.5 degree; Longitude_Resolution=2.5 degree; Horizontal

  4. CERES ERBE-like Monthly Geographical Averages (ES-4) in HDF (CER_ES4_Terra-FM1_Edition2)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-4 is also produced for combinations of scanner instruments. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The following CERES ES4 data sets are currently available: CER_ES4_FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition2 CER_ES4_PFM+FM1_Edition1 CER_ES4_PFM+FM2_Edition1 CER_ES4_TRMM-PFM_Edition1 CER_ES4_TRMM-PFM_Edition2 CER_ES4_Terra-FM1_Edition1 CER_ES4_Terra-FM2_Edition1 CER_ES4_FM1+FM2_Edition2 CER_ES4_Terra-FM1_Edition2 CER_ES4_Terra-FM2_Edition2 CER_ES4_Aqua-FM3_Edition1 CER_ES4_Aqua-FM4_Edition1 CER_ES4_FM1+FM2+FM3+FM4_Edition1 CER_ES4_Aqua-FM3_Edition2 CER_ES4_Aqua-FM4_Edition2 CER_ES4_FM1+FM3_Edition2 CER_ES4_FM1+FM4_Edition2 CER_ES4_PFM+FM1_Edition2 CER_ES4_PFM+FM2_Edition2 CER_ES4_Aqua-FM3_Edition1-CV CER_ES4_Aqua-FM4_Edition1-CV CER_ES4_Terra-FM1_Edition1-CV CER_ES4_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-12-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=2.5 degree; Longitude_Resolution=2.5 degree; Horizontal

  5. CERES ERBE-like Monthly Geographical Averages (ES-4) in HDF (CER_ES4_Aqua-FM4_Edition2)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-4 is also produced for combinations of scanner instruments. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The following CERES ES4 data sets are currently available: CER_ES4_FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition2 CER_ES4_PFM+FM1_Edition1 CER_ES4_PFM+FM2_Edition1 CER_ES4_TRMM-PFM_Edition1 CER_ES4_TRMM-PFM_Edition2 CER_ES4_Terra-FM1_Edition1 CER_ES4_Terra-FM2_Edition1 CER_ES4_FM1+FM2_Edition2 CER_ES4_Terra-FM1_Edition2 CER_ES4_Terra-FM2_Edition2 CER_ES4_Aqua-FM3_Edition1 CER_ES4_Aqua-FM4_Edition1 CER_ES4_FM1+FM2+FM3+FM4_Edition1 CER_ES4_Aqua-FM3_Edition2 CER_ES4_Aqua-FM4_Edition2 CER_ES4_FM1+FM3_Edition2 CER_ES4_FM1+FM4_Edition2 CER_ES4_PFM+FM1_Edition2 CER_ES4_PFM+FM2_Edition2 CER_ES4_Aqua-FM3_Edition1-CV CER_ES4_Aqua-FM4_Edition1-CV CER_ES4_Terra-FM1_Edition1-CV CER_ES4_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-03-29] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=2.5 degree; Longitude_Resolution=2.5 degree; Horizontal

  6. CERES ERBE-like Monthly Geographical Averages (ES-4) in HDF (CER_ES4_PFM+FM2_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-4 is also produced for combinations of scanner instruments. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The following CERES ES4 data sets are currently available: CER_ES4_FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition2 CER_ES4_PFM+FM1_Edition1 CER_ES4_PFM+FM2_Edition1 CER_ES4_TRMM-PFM_Edition1 CER_ES4_TRMM-PFM_Edition2 CER_ES4_Terra-FM1_Edition1 CER_ES4_Terra-FM2_Edition1 CER_ES4_FM1+FM2_Edition2 CER_ES4_Terra-FM1_Edition2 CER_ES4_Terra-FM2_Edition2 CER_ES4_Aqua-FM3_Edition1 CER_ES4_Aqua-FM4_Edition1 CER_ES4_FM1+FM2+FM3+FM4_Edition1 CER_ES4_Aqua-FM3_Edition2 CER_ES4_Aqua-FM4_Edition2 CER_ES4_FM1+FM3_Edition2 CER_ES4_FM1+FM4_Edition2 CER_ES4_PFM+FM1_Edition2 CER_ES4_PFM+FM2_Edition2 CER_ES4_Aqua-FM3_Edition1-CV CER_ES4_Aqua-FM4_Edition1-CV CER_ES4_Terra-FM1_Edition1-CV CER_ES4_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2000-03-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=2.5 degree; Longitude_Resolution=2.5 degree; Horizontal

  7. CERES ERBE-like Monthly Geographical Averages (ES-4) in HDF (CER_ES4_Aqua-FM3_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-4 is also produced for combinations of scanner instruments. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The following CERES ES4 data sets are currently available: CER_ES4_FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition2 CER_ES4_PFM+FM1_Edition1 CER_ES4_PFM+FM2_Edition1 CER_ES4_TRMM-PFM_Edition1 CER_ES4_TRMM-PFM_Edition2 CER_ES4_Terra-FM1_Edition1 CER_ES4_Terra-FM2_Edition1 CER_ES4_FM1+FM2_Edition2 CER_ES4_Terra-FM1_Edition2 CER_ES4_Terra-FM2_Edition2 CER_ES4_Aqua-FM3_Edition1 CER_ES4_Aqua-FM4_Edition1 CER_ES4_FM1+FM2+FM3+FM4_Edition1 CER_ES4_Aqua-FM3_Edition2 CER_ES4_Aqua-FM4_Edition2 CER_ES4_FM1+FM3_Edition2 CER_ES4_FM1+FM4_Edition2 CER_ES4_PFM+FM1_Edition2 CER_ES4_PFM+FM2_Edition2 CER_ES4_Aqua-FM3_Edition1-CV CER_ES4_Aqua-FM4_Edition1-CV CER_ES4_Terra-FM1_Edition1-CV CER_ES4_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-10-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=2.5 degree; Longitude_Resolution=2.5 degree; Horizontal

  8. CERES ERBE-like Monthly Geographical Averages (ES-4) in HDF (CER_ES4_PFM+FM1_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-4 is also produced for combinations of scanner instruments. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The following CERES ES4 data sets are currently available: CER_ES4_FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition2 CER_ES4_PFM+FM1_Edition1 CER_ES4_PFM+FM2_Edition1 CER_ES4_TRMM-PFM_Edition1 CER_ES4_TRMM-PFM_Edition2 CER_ES4_Terra-FM1_Edition1 CER_ES4_Terra-FM2_Edition1 CER_ES4_FM1+FM2_Edition2 CER_ES4_Terra-FM1_Edition2 CER_ES4_Terra-FM2_Edition2 CER_ES4_Aqua-FM3_Edition1 CER_ES4_Aqua-FM4_Edition1 CER_ES4_FM1+FM2+FM3+FM4_Edition1 CER_ES4_Aqua-FM3_Edition2 CER_ES4_Aqua-FM4_Edition2 CER_ES4_FM1+FM3_Edition2 CER_ES4_FM1+FM4_Edition2 CER_ES4_PFM+FM1_Edition2 CER_ES4_PFM+FM2_Edition2 CER_ES4_Aqua-FM3_Edition1-CV CER_ES4_Aqua-FM4_Edition1-CV CER_ES4_Terra-FM1_Edition1-CV CER_ES4_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2000-03-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=2.5 degree; Longitude_Resolution=2.5 degree; Horizontal

  9. CERES ERBE-like Monthly Geographical Averages (ES-4) in HDF (CER_ES4_Terra-FM1_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-4 is also produced for combinations of scanner instruments. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The following CERES ES4 data sets are currently available: CER_ES4_FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition2 CER_ES4_PFM+FM1_Edition1 CER_ES4_PFM+FM2_Edition1 CER_ES4_TRMM-PFM_Edition1 CER_ES4_TRMM-PFM_Edition2 CER_ES4_Terra-FM1_Edition1 CER_ES4_Terra-FM2_Edition1 CER_ES4_FM1+FM2_Edition2 CER_ES4_Terra-FM1_Edition2 CER_ES4_Terra-FM2_Edition2 CER_ES4_Aqua-FM3_Edition1 CER_ES4_Aqua-FM4_Edition1 CER_ES4_FM1+FM2+FM3+FM4_Edition1 CER_ES4_Aqua-FM3_Edition2 CER_ES4_Aqua-FM4_Edition2 CER_ES4_FM1+FM3_Edition2 CER_ES4_FM1+FM4_Edition2 CER_ES4_PFM+FM1_Edition2 CER_ES4_PFM+FM2_Edition2 CER_ES4_Aqua-FM3_Edition1-CV CER_ES4_Aqua-FM4_Edition1-CV CER_ES4_Terra-FM1_Edition1-CV CER_ES4_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-10-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=2.5 degree; Longitude_Resolution=2.5 degree; Horizontal

  10. CERES ERBE-like Monthly Geographical Averages (ES-4) in HDF (CER_ES4_Terra-FM2_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-4 is also produced for combinations of scanner instruments. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The following CERES ES4 data sets are currently available: CER_ES4_FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition2 CER_ES4_PFM+FM1_Edition1 CER_ES4_PFM+FM2_Edition1 CER_ES4_TRMM-PFM_Edition1 CER_ES4_TRMM-PFM_Edition2 CER_ES4_Terra-FM1_Edition1 CER_ES4_Terra-FM2_Edition1 CER_ES4_FM1+FM2_Edition2 CER_ES4_Terra-FM1_Edition2 CER_ES4_Terra-FM2_Edition2 CER_ES4_Aqua-FM3_Edition1 CER_ES4_Aqua-FM4_Edition1 CER_ES4_FM1+FM2+FM3+FM4_Edition1 CER_ES4_Aqua-FM3_Edition2 CER_ES4_Aqua-FM4_Edition2 CER_ES4_FM1+FM3_Edition2 CER_ES4_FM1+FM4_Edition2 CER_ES4_PFM+FM1_Edition2 CER_ES4_PFM+FM2_Edition2 CER_ES4_Aqua-FM3_Edition1-CV CER_ES4_Aqua-FM4_Edition1-CV CER_ES4_Terra-FM1_Edition1-CV CER_ES4_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-10-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=2.5 degree; Longitude_Resolution=2.5 degree; Horizontal

  11. CERES ERBE-like Monthly Geographical Averages (ES-4) in HDF (CER_ES4_Aqua-FM3_Edition2)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-4 is also produced for combinations of scanner instruments. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The following CERES ES4 data sets are currently available: CER_ES4_FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition2 CER_ES4_PFM+FM1_Edition1 CER_ES4_PFM+FM2_Edition1 CER_ES4_TRMM-PFM_Edition1 CER_ES4_TRMM-PFM_Edition2 CER_ES4_Terra-FM1_Edition1 CER_ES4_Terra-FM2_Edition1 CER_ES4_FM1+FM2_Edition2 CER_ES4_Terra-FM1_Edition2 CER_ES4_Terra-FM2_Edition2 CER_ES4_Aqua-FM3_Edition1 CER_ES4_Aqua-FM4_Edition1 CER_ES4_FM1+FM2+FM3+FM4_Edition1 CER_ES4_Aqua-FM3_Edition2 CER_ES4_Aqua-FM4_Edition2 CER_ES4_FM1+FM3_Edition2 CER_ES4_FM1+FM4_Edition2 CER_ES4_PFM+FM1_Edition2 CER_ES4_PFM+FM2_Edition2 CER_ES4_Aqua-FM3_Edition1-CV CER_ES4_Aqua-FM4_Edition1-CV CER_ES4_Terra-FM1_Edition1-CV CER_ES4_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-12-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=2.5 degree; Longitude_Resolution=2.5 degree; Horizontal

  12. CERES ERBE-like Monthly Regional Averages (ES-9) in HDF (CER_ES9_Aqua-FM3_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Regional Averages (ES-9) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-9 is also produced for combinations of scanner instruments. All instantaneous shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-8 product for a month are sorted by 2.5-degree spatial regions, by day number, and by the local hour of observation. The mean of the instantaneous fluxes for a given region-day-hour bin is determined and recorded on the ES-9 along with other flux statistics and scene information. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The ES-9 also contains hourly average fluxes for the month and an overall monthly average for each region. These average fluxes are given for both clear-sky and total-sky scenes. The following CERES ES9 data sets are currently available: CER_ES9_FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition2 CER_ES9_PFM+FM1_Edition1 CER_ES9_PFM+FM2_Edition1 CER_ES9_PFM+FM1_Edition2 CER_ES9_PFM+FM2_Edition2 CER_ES9_TRMM-PFM_Edition1 CER_ES9_TRMM-PFM_Edition2 CER_ES9_Terra-FM1_Edition1 CER_ES9_Terra-FM2_Edition1 CER_ES9_FM1+FM2_Edition2 CER_ES9_Terra-FM1_Edition2 CER_ES9_Terra-FM2_Edition2 CER_ES9_Aqua-FM3_Edition1 CER_ES9_Aqua-FM4_Edition1 CER_ES9_FM1+FM2+FM3+FM4_Edition1 CER_ES9_Aqua-FM3_Edition2 CER_ES9_Aqua-FM4_Edition2 CER_ES9_FM1+FM3_Edition2 CER_ES9_FM1+FM4_Edition2 CER_ES9_Aqua-FM3_Edition1-CV CER_ES9_Aqua-FM4_Edition1-CV CER_ES9_Terra-FM1_Edition1-CV CER_ES9_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-10-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost

  13. CERES ERBE-like Monthly Regional Averages (ES-9) in HDF (CER_ES9_Terra-FM2_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Regional Averages (ES-9) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-9 is also produced for combinations of scanner instruments. All instantaneous shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-8 product for a month are sorted by 2.5-degree spatial regions, by day number, and by the local hour of observation. The mean of the instantaneous fluxes for a given region-day-hour bin is determined and recorded on the ES-9 along with other flux statistics and scene information. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The ES-9 also contains hourly average fluxes for the month and an overall monthly average for each region. These average fluxes are given for both clear-sky and total-sky scenes. The following CERES ES9 data sets are currently available: CER_ES9_FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition2 CER_ES9_PFM+FM1_Edition1 CER_ES9_PFM+FM2_Edition1 CER_ES9_PFM+FM1_Edition2 CER_ES9_PFM+FM2_Edition2 CER_ES9_TRMM-PFM_Edition1 CER_ES9_TRMM-PFM_Edition2 CER_ES9_Terra-FM1_Edition1 CER_ES9_Terra-FM2_Edition1 CER_ES9_FM1+FM2_Edition2 CER_ES9_Terra-FM1_Edition2 CER_ES9_Terra-FM2_Edition2 CER_ES9_Aqua-FM3_Edition1 CER_ES9_Aqua-FM4_Edition1 CER_ES9_FM1+FM2+FM3+FM4_Edition1 CER_ES9_Aqua-FM3_Edition2 CER_ES9_Aqua-FM4_Edition2 CER_ES9_FM1+FM3_Edition2 CER_ES9_FM1+FM4_Edition2 CER_ES9_Aqua-FM3_Edition1-CV CER_ES9_Aqua-FM4_Edition1-CV CER_ES9_Terra-FM1_Edition1-CV CER_ES9_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-10-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost

  14. CERES ERBE-like Monthly Regional Averages (ES-9) in HDF (CER_ES9_PFM+FM1_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Regional Averages (ES-9) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-9 is also produced for combinations of scanner instruments. All instantaneous shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-8 product for a month are sorted by 2.5-degree spatial regions, by day number, and by the local hour of observation. The mean of the instantaneous fluxes for a given region-day-hour bin is determined and recorded on the ES-9 along with other flux statistics and scene information. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The ES-9 also contains hourly average fluxes for the month and an overall monthly average for each region. These average fluxes are given for both clear-sky and total-sky scenes. The following CERES ES9 data sets are currently available: CER_ES9_FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition2 CER_ES9_PFM+FM1_Edition1 CER_ES9_PFM+FM2_Edition1 CER_ES9_PFM+FM1_Edition2 CER_ES9_PFM+FM2_Edition2 CER_ES9_TRMM-PFM_Edition1 CER_ES9_TRMM-PFM_Edition2 CER_ES9_Terra-FM1_Edition1 CER_ES9_Terra-FM2_Edition1 CER_ES9_FM1+FM2_Edition2 CER_ES9_Terra-FM1_Edition2 CER_ES9_Terra-FM2_Edition2 CER_ES9_Aqua-FM3_Edition1 CER_ES9_Aqua-FM4_Edition1 CER_ES9_FM1+FM2+FM3+FM4_Edition1 CER_ES9_Aqua-FM3_Edition2 CER_ES9_Aqua-FM4_Edition2 CER_ES9_FM1+FM3_Edition2 CER_ES9_FM1+FM4_Edition2 CER_ES9_Aqua-FM3_Edition1-CV CER_ES9_Aqua-FM4_Edition1-CV CER_ES9_Terra-FM1_Edition1-CV CER_ES9_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2000-03-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost

  15. CERES ERBE-like Monthly Regional Averages (ES-9) in HDF (CER_ES9_Aqua-FM4_Edition2)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Regional Averages (ES-9) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-9 is also produced for combinations of scanner instruments. All instantaneous shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-8 product for a month are sorted by 2.5-degree spatial regions, by day number, and by the local hour of observation. The mean of the instantaneous fluxes for a given region-day-hour bin is determined and recorded on the ES-9 along with other flux statistics and scene information. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The ES-9 also contains hourly average fluxes for the month and an overall monthly average for each region. These average fluxes are given for both clear-sky and total-sky scenes. The following CERES ES9 data sets are currently available: CER_ES9_FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition2 CER_ES9_PFM+FM1_Edition1 CER_ES9_PFM+FM2_Edition1 CER_ES9_PFM+FM1_Edition2 CER_ES9_PFM+FM2_Edition2 CER_ES9_TRMM-PFM_Edition1 CER_ES9_TRMM-PFM_Edition2 CER_ES9_Terra-FM1_Edition1 CER_ES9_Terra-FM2_Edition1 CER_ES9_FM1+FM2_Edition2 CER_ES9_Terra-FM1_Edition2 CER_ES9_Terra-FM2_Edition2 CER_ES9_Aqua-FM3_Edition1 CER_ES9_Aqua-FM4_Edition1 CER_ES9_FM1+FM2+FM3+FM4_Edition1 CER_ES9_Aqua-FM3_Edition2 CER_ES9_Aqua-FM4_Edition2 CER_ES9_FM1+FM3_Edition2 CER_ES9_FM1+FM4_Edition2 CER_ES9_Aqua-FM3_Edition1-CV CER_ES9_Aqua-FM4_Edition1-CV CER_ES9_Terra-FM1_Edition1-CV CER_ES9_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-03-29] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost

  16. CERES ERBE-like Monthly Regional Averages (ES-9) in HDF (CER_ES9_PFM+FM2_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Regional Averages (ES-9) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-9 is also produced for combinations of scanner instruments. All instantaneous shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-8 product for a month are sorted by 2.5-degree spatial regions, by day number, and by the local hour of observation. The mean of the instantaneous fluxes for a given region-day-hour bin is determined and recorded on the ES-9 along with other flux statistics and scene information. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The ES-9 also contains hourly average fluxes for the month and an overall monthly average for each region. These average fluxes are given for both clear-sky and total-sky scenes. The following CERES ES9 data sets are currently available: CER_ES9_FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition2 CER_ES9_PFM+FM1_Edition1 CER_ES9_PFM+FM2_Edition1 CER_ES9_PFM+FM1_Edition2 CER_ES9_PFM+FM2_Edition2 CER_ES9_TRMM-PFM_Edition1 CER_ES9_TRMM-PFM_Edition2 CER_ES9_Terra-FM1_Edition1 CER_ES9_Terra-FM2_Edition1 CER_ES9_FM1+FM2_Edition2 CER_ES9_Terra-FM1_Edition2 CER_ES9_Terra-FM2_Edition2 CER_ES9_Aqua-FM3_Edition1 CER_ES9_Aqua-FM4_Edition1 CER_ES9_FM1+FM2+FM3+FM4_Edition1 CER_ES9_Aqua-FM3_Edition2 CER_ES9_Aqua-FM4_Edition2 CER_ES9_FM1+FM3_Edition2 CER_ES9_FM1+FM4_Edition2 CER_ES9_Aqua-FM3_Edition1-CV CER_ES9_Aqua-FM4_Edition1-CV CER_ES9_Terra-FM1_Edition1-CV CER_ES9_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2000-03-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost

  17. CERES ERBE-like Monthly Regional Averages (ES-9) in HDF (CER_ES9_Aqua-FM4_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Regional Averages (ES-9) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-9 is also produced for combinations of scanner instruments. All instantaneous shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-8 product for a month are sorted by 2.5-degree spatial regions, by day number, and by the local hour of observation. The mean of the instantaneous fluxes for a given region-day-hour bin is determined and recorded on the ES-9 along with other flux statistics and scene information. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The ES-9 also contains hourly average fluxes for the month and an overall monthly average for each region. These average fluxes are given for both clear-sky and total-sky scenes. The following CERES ES9 data sets are currently available: CER_ES9_FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition2 CER_ES9_PFM+FM1_Edition1 CER_ES9_PFM+FM2_Edition1 CER_ES9_PFM+FM1_Edition2 CER_ES9_PFM+FM2_Edition2 CER_ES9_TRMM-PFM_Edition1 CER_ES9_TRMM-PFM_Edition2 CER_ES9_Terra-FM1_Edition1 CER_ES9_Terra-FM2_Edition1 CER_ES9_FM1+FM2_Edition2 CER_ES9_Terra-FM1_Edition2 CER_ES9_Terra-FM2_Edition2 CER_ES9_Aqua-FM3_Edition1 CER_ES9_Aqua-FM4_Edition1 CER_ES9_FM1+FM2+FM3+FM4_Edition1 CER_ES9_Aqua-FM3_Edition2 CER_ES9_Aqua-FM4_Edition2 CER_ES9_FM1+FM3_Edition2 CER_ES9_FM1+FM4_Edition2 CER_ES9_Aqua-FM3_Edition1-CV CER_ES9_Aqua-FM4_Edition1-CV CER_ES9_Terra-FM1_Edition1-CV CER_ES9_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-03-29] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost

  18. CERES ERBE-like Monthly Regional Averages (ES-9) in HDF (CER_ES9_Terra-FM1_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Regional Averages (ES-9) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-9 is also produced for combinations of scanner instruments. All instantaneous shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-8 product for a month are sorted by 2.5-degree spatial regions, by day number, and by the local hour of observation. The mean of the instantaneous fluxes for a given region-day-hour bin is determined and recorded on the ES-9 along with other flux statistics and scene information. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The ES-9 also contains hourly average fluxes for the month and an overall monthly average for each region. These average fluxes are given for both clear-sky and total-sky scenes. The following CERES ES9 data sets are currently available: CER_ES9_FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition2 CER_ES9_PFM+FM1_Edition1 CER_ES9_PFM+FM2_Edition1 CER_ES9_PFM+FM1_Edition2 CER_ES9_PFM+FM2_Edition2 CER_ES9_TRMM-PFM_Edition1 CER_ES9_TRMM-PFM_Edition2 CER_ES9_Terra-FM1_Edition1 CER_ES9_Terra-FM2_Edition1 CER_ES9_FM1+FM2_Edition2 CER_ES9_Terra-FM1_Edition2 CER_ES9_Terra-FM2_Edition2 CER_ES9_Aqua-FM3_Edition1 CER_ES9_Aqua-FM4_Edition1 CER_ES9_FM1+FM2+FM3+FM4_Edition1 CER_ES9_Aqua-FM3_Edition2 CER_ES9_Aqua-FM4_Edition2 CER_ES9_FM1+FM3_Edition2 CER_ES9_FM1+FM4_Edition2 CER_ES9_Aqua-FM3_Edition1-CV CER_ES9_Aqua-FM4_Edition1-CV CER_ES9_Terra-FM1_Edition1-CV CER_ES9_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-10-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost

  19. CERES ERBE-like Monthly Geographical Averages (ES-4) in HDF (CER_ES4_FM1+FM2_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-4 is also produced for combinations of scanner instruments. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The following CERES ES4 data sets are currently available: CER_ES4_FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition2 CER_ES4_PFM+FM1_Edition1 CER_ES4_PFM+FM2_Edition1 CER_ES4_TRMM-PFM_Edition1 CER_ES4_TRMM-PFM_Edition2 CER_ES4_Terra-FM1_Edition1 CER_ES4_Terra-FM2_Edition1 CER_ES4_FM1+FM2_Edition2 CER_ES4_Terra-FM1_Edition2 CER_ES4_Terra-FM2_Edition2 CER_ES4_Aqua-FM3_Edition1 CER_ES4_Aqua-FM4_Edition1 CER_ES4_FM1+FM2+FM3+FM4_Edition1 CER_ES4_Aqua-FM3_Edition2 CER_ES4_Aqua-FM4_Edition2 CER_ES4_FM1+FM3_Edition2 CER_ES4_FM1+FM4_Edition2 CER_ES4_PFM+FM1_Edition2 CER_ES4_PFM+FM2_Edition2 CER_ES4_Aqua-FM3_Edition1-CV CER_ES4_Aqua-FM4_Edition1-CV CER_ES4_Terra-FM1_Edition1-CV CER_ES4_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2003-12-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=2.5 degree; Longitude_Resolution=2.5 degree; Horizontal

  20. CERES ERBE-like Monthly Geographical Averages (ES-4) in HDF (CER_ES4_FM1+FM4_Edition2)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-4 is also produced for combinations of scanner instruments. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The following CERES ES4 data sets are currently available: CER_ES4_FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition2 CER_ES4_PFM+FM1_Edition1 CER_ES4_PFM+FM2_Edition1 CER_ES4_TRMM-PFM_Edition1 CER_ES4_TRMM-PFM_Edition2 CER_ES4_Terra-FM1_Edition1 CER_ES4_Terra-FM2_Edition1 CER_ES4_FM1+FM2_Edition2 CER_ES4_Terra-FM1_Edition2 CER_ES4_Terra-FM2_Edition2 CER_ES4_Aqua-FM3_Edition1 CER_ES4_Aqua-FM4_Edition1 CER_ES4_FM1+FM2+FM3+FM4_Edition1 CER_ES4_Aqua-FM3_Edition2 CER_ES4_Aqua-FM4_Edition2 CER_ES4_FM1+FM3_Edition2 CER_ES4_FM1+FM4_Edition2 CER_ES4_PFM+FM1_Edition2 CER_ES4_PFM+FM2_Edition2 CER_ES4_Aqua-FM3_Edition1-CV CER_ES4_Aqua-FM4_Edition1-CV CER_ES4_Terra-FM1_Edition1-CV CER_ES4_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-03-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=2.5 degree; Longitude_Resolution=2.5 degree; Horizontal

  1. CERES ERBE-like Monthly Geographical Averages (ES-4) in HDF (CER_ES4_FM1+FM3_Edition2)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-4 is also produced for combinations of scanner instruments. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The following CERES ES4 data sets are currently available: CER_ES4_FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition2 CER_ES4_PFM+FM1_Edition1 CER_ES4_PFM+FM2_Edition1 CER_ES4_TRMM-PFM_Edition1 CER_ES4_TRMM-PFM_Edition2 CER_ES4_Terra-FM1_Edition1 CER_ES4_Terra-FM2_Edition1 CER_ES4_FM1+FM2_Edition2 CER_ES4_Terra-FM1_Edition2 CER_ES4_Terra-FM2_Edition2 CER_ES4_Aqua-FM3_Edition1 CER_ES4_Aqua-FM4_Edition1 CER_ES4_FM1+FM2+FM3+FM4_Edition1 CER_ES4_Aqua-FM3_Edition2 CER_ES4_Aqua-FM4_Edition2 CER_ES4_FM1+FM3_Edition2 CER_ES4_FM1+FM4_Edition2 CER_ES4_PFM+FM1_Edition2 CER_ES4_PFM+FM2_Edition2 CER_ES4_Aqua-FM3_Edition1-CV CER_ES4_Aqua-FM4_Edition1-CV CER_ES4_Terra-FM1_Edition1-CV CER_ES4_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-12-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=2.5 degree; Longitude_Resolution=2.5 degree; Horizontal

  2. CERES ERBE-like Monthly Geographical Averages (ES-4) in HDF (CER_ES4_Terra-FM2_Edition1-CV)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-4 is also produced for combinations of scanner instruments. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The following CERES ES4 data sets are currently available: CER_ES4_FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition2 CER_ES4_PFM+FM1_Edition1 CER_ES4_PFM+FM2_Edition1 CER_ES4_TRMM-PFM_Edition1 CER_ES4_TRMM-PFM_Edition2 CER_ES4_Terra-FM1_Edition1 CER_ES4_Terra-FM2_Edition1 CER_ES4_FM1+FM2_Edition2 CER_ES4_Terra-FM1_Edition2 CER_ES4_Terra-FM2_Edition2 CER_ES4_Aqua-FM3_Edition1 CER_ES4_Aqua-FM4_Edition1 CER_ES4_FM1+FM2+FM3+FM4_Edition1 CER_ES4_Aqua-FM3_Edition2 CER_ES4_Aqua-FM4_Edition2 CER_ES4_FM1+FM3_Edition2 CER_ES4_FM1+FM4_Edition2 CER_ES4_PFM+FM1_Edition2 CER_ES4_PFM+FM2_Edition2 CER_ES4_Aqua-FM3_Edition1-CV CER_ES4_Aqua-FM4_Edition1-CV CER_ES4_Terra-FM1_Edition1-CV CER_ES4_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2006-10-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=2.5 degree; Longitude_Resolution=2.5 degree; Horizontal

  3. CERES ERBE-like Monthly Geographical Averages (ES-4) in HDF (CER_ES4_FM1+FM2_Edition2)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-4 is also produced for combinations of scanner instruments. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The following CERES ES4 data sets are currently available: CER_ES4_FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition2 CER_ES4_PFM+FM1_Edition1 CER_ES4_PFM+FM2_Edition1 CER_ES4_TRMM-PFM_Edition1 CER_ES4_TRMM-PFM_Edition2 CER_ES4_Terra-FM1_Edition1 CER_ES4_Terra-FM2_Edition1 CER_ES4_FM1+FM2_Edition2 CER_ES4_Terra-FM1_Edition2 CER_ES4_Terra-FM2_Edition2 CER_ES4_Aqua-FM3_Edition1 CER_ES4_Aqua-FM4_Edition1 CER_ES4_FM1+FM2+FM3+FM4_Edition1 CER_ES4_Aqua-FM3_Edition2 CER_ES4_Aqua-FM4_Edition2 CER_ES4_FM1+FM3_Edition2 CER_ES4_FM1+FM4_Edition2 CER_ES4_PFM+FM1_Edition2 CER_ES4_PFM+FM2_Edition2 CER_ES4_Aqua-FM3_Edition1-CV CER_ES4_Aqua-FM4_Edition1-CV CER_ES4_Terra-FM1_Edition1-CV CER_ES4_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2002-12-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=2.5 degree; Longitude_Resolution=2.5 degree; Horizontal

  4. CERES ERBE-like Monthly Geographical Averages (ES-4) in HDF (CER_ES4_Aqua-FM4_Edition1-CV)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Geographical Averages (ES-4) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-4 is also produced for combinations of scanner instruments. For each observed 2.5-degree spatial region, the daily average, the hourly average over the month, and the overall monthly average of shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-9 product are spatially nested up from 2.5-degree regions to 5- and 10-degree regions, to 2.5-, 5-, and 10-degree zonal averages, and to global monthly averages. For each nested area, the albedo and net flux are given. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The following CERES ES4 data sets are currently available: CER_ES4_FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition1 CER_ES4_PFM+FM1+FM2_Edition2 CER_ES4_PFM+FM1_Edition1 CER_ES4_PFM+FM2_Edition1 CER_ES4_TRMM-PFM_Edition1 CER_ES4_TRMM-PFM_Edition2 CER_ES4_Terra-FM1_Edition1 CER_ES4_Terra-FM2_Edition1 CER_ES4_FM1+FM2_Edition2 CER_ES4_Terra-FM1_Edition2 CER_ES4_Terra-FM2_Edition2 CER_ES4_Aqua-FM3_Edition1 CER_ES4_Aqua-FM4_Edition1 CER_ES4_FM1+FM2+FM3+FM4_Edition1 CER_ES4_Aqua-FM3_Edition2 CER_ES4_Aqua-FM4_Edition2 CER_ES4_FM1+FM3_Edition2 CER_ES4_FM1+FM4_Edition2 CER_ES4_PFM+FM1_Edition2 CER_ES4_PFM+FM2_Edition2 CER_ES4_Aqua-FM3_Edition1-CV CER_ES4_Aqua-FM4_Edition1-CV CER_ES4_Terra-FM1_Edition1-CV CER_ES4_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-03-29] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=2.5 degree; Longitude_Resolution=2.5 degree; Horizontal

  5. Bringing liraglutide to market: a CER case study.

    Science.gov (United States)

    Oderda, Gary; Sifford-Wilson, S Monet

    2012-06-01

    Faced with competition from other drugs and therapies, drug manufacturers may be able to use comparative effectiveness research (CER) to help reduce barriers to a new drug's adoption and integration into formularies. But few examples exist to show how CER can be used effectively and whether the data can make a difference. To examine how CER can help strengthen a new drug's entry into the market and integration into formularies, and how ongoing CER might be valuable as a drug is implemented in the real world. A roundtable of 9 representatives from health plans, including formulary decision makers, evaluated how CER in phase 3 development of a new drug can add to the drug's strength of evidence, helping decision makers understand how and where to integrate that drug into a formulary. The round table participants viewed, as a case study, the development of liraglutide, a glucagon-like peptide-1 (GLP-1) receptor agonist for adults with type 2 diabetes that was approved by the FDA in January 2010. With this drug, CER was incorporated into an extensive type 2 diabetes clinical development program, comparing how the drug worked in comparison with other established therapies. Although there are many antidiabetic drugs available for use, patients with type 2 diabetes often need additional agents. The FDA approved liraglutide with the conclusion that benefits of the drug outweighed potential risks but noted the association with pancreatitis in humans and animal data that showed rare medullary thyroid cancer associated with liraglutide. Roundtable participants agreed that while pre-launch CER can be valuable, ongoing real-world research is also important for confirming expected results, identifying additional uses and indications and managing risks. The participants also suggested opportunities for additional CER studies and made recommendations for manufacturers. Roundtable thought leaders agreed that well-planned trial designs incorporating CER result in high

  6. CERES ERBE-like Monthly Regional Averages (ES-9) in HDF (CERES:CER_ES9_PFM+FM1_Edition2)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Regional Averages (ES-9) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-9 is also produced for combinations of scanner instruments. All instantaneous shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-8 product for a month are sorted by 2.5-degree spatial regions, by day number, and by the local hour of observation. The mean of the instantaneous fluxes for a given region-day-hour bin is determined and recorded on the ES-9 along with other flux statistics and scene information. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The ES-9 also contains hourly average fluxes for the month and an overall monthly average for each region. These average fluxes are given for both clear-sky and total-sky scenes. The following CERES ES9 data sets are currently available: CER_ES9_FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition2 CER_ES9_PFM+FM1_Edition1 CER_ES9_PFM+FM2_Edition1 CER_ES9_PFM+FM1_Edition2 CER_ES9_PFM+FM2_Edition2 CER_ES9_TRMM-PFM_Edition1 CER_ES9_TRMM-PFM_Edition2 CER_ES9_Terra-FM1_Edition1 CER_ES9_Terra-FM2_Edition1 CER_ES9_FM1+FM2_Edition2 CER_ES9_Terra-FM1_Edition2 CER_ES9_Terra-FM2_Edition2 CER_ES9_Aqua-FM3_Edition1 CER_ES9_Aqua-FM4_Edition1 CER_ES9_FM1+FM2+FM3+FM4_Edition1 CER_ES9_Aqua-FM3_Edition2 CER_ES9_Aqua-FM4_Edition2 CER_ES9_FM1+FM3_Edition2 CER_ES9_FM1+FM4_Edition2 CER_ES9_Aqua-FM3_Edition1-CV CER_ES9_Aqua-FM4_Edition1-CV CER_ES9_Terra-FM1_Edition1-CV CER_ES9_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2000-03-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost

  7. CERES ERBE-like Monthly Regional Averages (ES-9) in HDF ( CER_ES9_Aqua-FM3_Edition1-CV)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Regional Averages (ES-9) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-9 is also produced for combinations of scanner instruments. All instantaneous shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-8 product for a month are sorted by 2.5-degree spatial regions, by day number, and by the local hour of observation. The mean of the instantaneous fluxes for a given region-day-hour bin is determined and recorded on the ES-9 along with other flux statistics and scene information. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The ES-9 also contains hourly average fluxes for the month and an overall monthly average for each region. These average fluxes are given for both clear-sky and total-sky scenes. The following CERES ES9 data sets are currently available: CER_ES9_FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition2 CER_ES9_PFM+FM1_Edition1 CER_ES9_PFM+FM2_Edition1 CER_ES9_PFM+FM1_Edition2 CER_ES9_PFM+FM2_Edition2 CER_ES9_TRMM-PFM_Edition1 CER_ES9_TRMM-PFM_Edition2 CER_ES9_Terra-FM1_Edition1 CER_ES9_Terra-FM2_Edition1 CER_ES9_FM1+FM2_Edition2 CER_ES9_Terra-FM1_Edition2 CER_ES9_Terra-FM2_Edition2 CER_ES9_Aqua-FM3_Edition1 CER_ES9_Aqua-FM4_Edition1 CER_ES9_FM1+FM2+FM3+FM4_Edition1 CER_ES9_Aqua-FM3_Edition2 CER_ES9_Aqua-FM4_Edition2 CER_ES9_FM1+FM3_Edition2 CER_ES9_FM1+FM4_Edition2 CER_ES9_Aqua-FM3_Edition1-CV CER_ES9_Aqua-FM4_Edition1-CV CER_ES9_Terra-FM1_Edition1-CV CER_ES9_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2006-10-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost

  8. CERES ERBE-like Monthly Regional Averages (ES-9) in HDF (CER_ES9_FM1+FM4_Edition2)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Regional Averages (ES-9) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-9 is also produced for combinations of scanner instruments. All instantaneous shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-8 product for a month are sorted by 2.5-degree spatial regions, by day number, and by the local hour of observation. The mean of the instantaneous fluxes for a given region-day-hour bin is determined and recorded on the ES-9 along with other flux statistics and scene information. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The ES-9 also contains hourly average fluxes for the month and an overall monthly average for each region. These average fluxes are given for both clear-sky and total-sky scenes. The following CERES ES9 data sets are currently available: CER_ES9_FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition2 CER_ES9_PFM+FM1_Edition1 CER_ES9_PFM+FM2_Edition1 CER_ES9_PFM+FM1_Edition2 CER_ES9_PFM+FM2_Edition2 CER_ES9_TRMM-PFM_Edition1 CER_ES9_TRMM-PFM_Edition2 CER_ES9_Terra-FM1_Edition1 CER_ES9_Terra-FM2_Edition1 CER_ES9_FM1+FM2_Edition2 CER_ES9_Terra-FM1_Edition2 CER_ES9_Terra-FM2_Edition2 CER_ES9_Aqua-FM3_Edition1 CER_ES9_Aqua-FM4_Edition1 CER_ES9_FM1+FM2+FM3+FM4_Edition1 CER_ES9_Aqua-FM3_Edition2 CER_ES9_Aqua-FM4_Edition2 CER_ES9_FM1+FM3_Edition2 CER_ES9_FM1+FM4_Edition2 CER_ES9_Aqua-FM3_Edition1-CV CER_ES9_Aqua-FM4_Edition1-CV CER_ES9_Terra-FM1_Edition1-CV CER_ES9_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-03-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost

  9. CERES ERBE-like Monthly Regional Averages (ES-9) in HDF ( CER_ES9_Terra-FM1_Edition1-CV)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Regional Averages (ES-9) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-9 is also produced for combinations of scanner instruments. All instantaneous shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-8 product for a month are sorted by 2.5-degree spatial regions, by day number, and by the local hour of observation. The mean of the instantaneous fluxes for a given region-day-hour bin is determined and recorded on the ES-9 along with other flux statistics and scene information. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The ES-9 also contains hourly average fluxes for the month and an overall monthly average for each region. These average fluxes are given for both clear-sky and total-sky scenes. The following CERES ES9 data sets are currently available: CER_ES9_FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition2 CER_ES9_PFM+FM1_Edition1 CER_ES9_PFM+FM2_Edition1 CER_ES9_PFM+FM1_Edition2 CER_ES9_PFM+FM2_Edition2 CER_ES9_TRMM-PFM_Edition1 CER_ES9_TRMM-PFM_Edition2 CER_ES9_Terra-FM1_Edition1 CER_ES9_Terra-FM2_Edition1 CER_ES9_FM1+FM2_Edition2 CER_ES9_Terra-FM1_Edition2 CER_ES9_Terra-FM2_Edition2 CER_ES9_Aqua-FM3_Edition1 CER_ES9_Aqua-FM4_Edition1 CER_ES9_FM1+FM2+FM3+FM4_Edition1 CER_ES9_Aqua-FM3_Edition2 CER_ES9_Aqua-FM4_Edition2 CER_ES9_FM1+FM3_Edition2 CER_ES9_FM1+FM4_Edition2 CER_ES9_Aqua-FM3_Edition1-CV CER_ES9_Aqua-FM4_Edition1-CV CER_ES9_Terra-FM1_Edition1-CV CER_ES9_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2006-09-30] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost

  10. CERES ERBE-like Monthly Regional Averages (ES-9) in HDF ( CER_ES9_Aqua-FM4_Edition1-CV)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ERBE-like Monthly Regional Averages (ES-9) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The ES-9 is also produced for combinations of scanner instruments. All instantaneous shortwave and longwave fluxes at the Top-of-the-Atmosphere (TOA) from the CERES ES-8 product for a month are sorted by 2.5-degree spatial regions, by day number, and by the local hour of observation. The mean of the instantaneous fluxes for a given region-day-hour bin is determined and recorded on the ES-9 along with other flux statistics and scene information. For each region, the daily average flux is estimated from an algorithm that uses the available hourly data, scene identification data, and diurnal models. This algorithm is 'like' the algorithm used for the Earth Radiation Budget Experiment (ERBE). The ES-9 also contains hourly average fluxes for the month and an overall monthly average for each region. These average fluxes are given for both clear-sky and total-sky scenes. The following CERES ES9 data sets are currently available: CER_ES9_FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition1 CER_ES9_PFM+FM1+FM2_Edition2 CER_ES9_PFM+FM1_Edition1 CER_ES9_PFM+FM2_Edition1 CER_ES9_PFM+FM1_Edition2 CER_ES9_PFM+FM2_Edition2 CER_ES9_TRMM-PFM_Edition1 CER_ES9_TRMM-PFM_Edition2 CER_ES9_Terra-FM1_Edition1 CER_ES9_Terra-FM2_Edition1 CER_ES9_FM1+FM2_Edition2 CER_ES9_Terra-FM1_Edition2 CER_ES9_Terra-FM2_Edition2 CER_ES9_Aqua-FM3_Edition1 CER_ES9_Aqua-FM4_Edition1 CER_ES9_FM1+FM2+FM3+FM4_Edition1 CER_ES9_Aqua-FM3_Edition2 CER_ES9_Aqua-FM4_Edition2 CER_ES9_FM1+FM3_Edition2 CER_ES9_FM1+FM4_Edition2 CER_ES9_Aqua-FM3_Edition1-CV CER_ES9_Aqua-FM4_Edition1-CV CER_ES9_Terra-FM1_Edition1-CV CER_ES9_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-03-29] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost

  11. The Thrombin Receptor Antagonist for Clinical Event Reduction in Acute Coronary Syndrome (TRA*CER) trial: study design and rationale.

    Science.gov (United States)

    2009-09-01

    The protease-activated receptor 1 (PAR-1), the main platelet receptor for thrombin, represents a novel target for treatment of arterial thrombosis, and SCH 530348 is an orally active, selective, competitive PAR-1 antagonist. We designed TRA*CER to evaluate the efficacy and safety of SCH 530348 compared with placebo in addition to standard of care in patients with non-ST-segment elevation (NSTE) acute coronary syndromes (ACS) and high-risk features. TRA*CER is a prospective, randomized, double-blind, multicenter, phase III trial with an original estimated sample size of 10,000 subjects. Our primary objective is to demonstrate that SCH 530348 in addition to standard of care will reduce the incidence of the composite of cardiovascular death, myocardial infarction (MI), stroke, recurrent ischemia with rehospitalization, and urgent coronary revascularization compared with standard of care alone. Our key secondary objective is to determine whether SCH 530348 will reduce the composite of cardiovascular death, MI, or stroke compared with standard of care alone. Secondary objectives related to safety are the composite of moderate and severe GUSTO bleeding and clinically significant TIMI bleeding. The trial will continue until a predetermined minimum number of centrally adjudicated primary and key secondary end point events have occurred and all subjects have participated in the study for at least 1 year. The TRA*CER trial is part of the large phase III SCH 530348 development program that includes a concomitant evaluation in secondary prevention. TRA*CER will define efficacy and safety of the novel platelet PAR-1 inhibitor SCH 530348 in the treatment of high-risk patients with NSTE ACS in the setting of current treatment strategies.

  12. Process energy reduction

    International Nuclear Information System (INIS)

    Lowthian, W.E.

    1993-01-01

    Process Energy Reduction (PER) is a demand-side energy reduction approach which complements and often supplants other traditional energy reduction methods such as conservation and heat recovery. Because the application of PER is less obvious than the traditional methods, it takes some time to learn the steps as well as practice to become proficient in its use. However, the benefit is significant, often far outweighing the traditional energy reduction approaches. Furthermore, the method usually results in a better process having less waste and pollution along with improved yields, increased capacity, and lower operating costs

  13. A novel approach to generating CER hypotheses based on mining clinical data.

    Science.gov (United States)

    Zhang, Shuo; Li, Lin; Yu, Yiqin; Sun, Xingzhi; Xu, Linhao; Zhao, Wei; Teng, Xiaofei; Pan, Yue

    2013-01-01

    Comparative effectiveness research (CER) is a scientific method of investigating the effectiveness of alternative intervention methods. In a CER study, clinical researchers typically start with a CER hypothesis, and aim to evaluate it by applying a series of medical statistical methods. Traditionally, the CER hypotheses are defined manually by clinical researchers. This makes the task of hypothesis generation very time-consuming and the quality of hypothesis heavily dependent on the researchers' skills. Recently, with more electronic medical data being collected, it is highly promising to apply the computerized method for discovering CER hypotheses from clinical data sets. In this poster, we proposes a novel approach to automatically generating CER hypotheses based on mining clinical data, and presents a case study showing that the approach can facilitate clinical researchers to identify potentially valuable hypotheses and eventually define high quality CER studies.

  14. HDL mimetic CER-001 targets atherosclerotic plaques in patients.

    Science.gov (United States)

    Zheng, Kang He; van der Valk, Fleur M; Smits, Loek P; Sandberg, Mara; Dasseux, Jean-Louis; Baron, Rudi; Barbaras, Ronald; Keyserling, Constance; Coolen, Bram F; Nederveen, Aart J; Verberne, Hein J; Nell, Thijs E; Vugts, Danielle J; Duivenvoorden, Raphaël; Fayad, Zahi A; Mulder, Willem J M; van Dongen, Guus A M S; Stroes, Erik S G

    2016-08-01

    Infusion of high-density lipoprotein (HDL) mimetics aimed at reducing atherosclerotic burden has led to equivocal results, which may relate in part to the inability of HDL mimetics to adequately reach atherosclerotic lesions in humans. This study evaluated delivery of recombinant human apolipoprotein A-I (apoA-I) containing HDL mimetic CER-001 in carotid plaques in patients. CER-001 was radiolabeled with the long-lived positron emitter zirconium-89 ((89)Zr) to enable positron emission tomography with computed tomography (PET/CT) imaging. Eight patients with atherosclerotic carotid artery disease (>50% stenosis) received a single infusion of unlabeled CER-001 (3 mg/kg), co-administered with 10 mg of (89)Zr-labeled CER-001 (18 MBq). Serial PET/CT imaging and contrast enhanced-magnetic resonance imaging (CE-MRI) were performed to evaluate targeted delivery of CER-001. One hour after infusion, mean plasma apoA-I levels increased by 9.9 mg/dL (p = 0.026), with a concomitant relative increase in the plasma cholesterol efflux capacity of 13.8% (p CER-001 expressed as target-to-background ratio (TBRmax) increased significantly 24 h after infusion, and remained increased up to 48 h (TBRmax t = 10 min: 0.98; t = 24 h: 1.14 (p = 0.001); t = 48 h: 1.12 (p = 0.007)). TBRmax was higher in plaque compared with non-plaque segments (1.18 vs. 1.05; p CER-001 increases plasma apoA-I concentration and plasma cholesterol efflux capacity. Our data support the concept that CER-001 targets plaque regions in patients, which correlates with plaque contrast enhancement. These clinical findings may also guide future nanomedicine development using HDL particles for drug delivery in atherosclerosis. Netherlands Trial Registry - NTR5178. http://www.trialregister.nl/trialreg/admin/rctview.asp?TC=5178. Copyright © 2016 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

  15. Nursing Research, CER, PICO and PCORI.

    Science.gov (United States)

    Patel, Darpan I

    2018-01-01

    Community and public health nurse researchers encompass a unique cohort of nurse researchers that have the skills and capacity to lead projects and programs of science centered on improvement of patient outcomes through methods of comparative effectiveness research (CER). CER, as a general method, has been taught to all nurses in the form of the PICO question to improve evidence-based practices. As the climate for funding becomes more and more competitive, nurse researchers are primed to lead the change in improving patient outcomes through patient centered outcomes research (PCOR). However, the number of projects funded by agencies like the Patient Centered Outcomes Research Institute, fall well below the capabilities of the field. The purpose of this commentary is to promote the field of PCOR and encourage novice and experienced nurse researchers to apply for funding from the PCORI by introducing different methods for building capacity and promoting engagement in the national conversations of PCOR and CER.

  16. A Multifactorial Mechanism in the Superior Antimalarial Activity of α-C-GalCer

    Directory of Open Access Journals (Sweden)

    John Schmieg

    2010-01-01

    Full Text Available We have previously shown that the C-glycoside analog of α-galactosylceramide (α-GalCer, α-C-GalCer, displays a superior inhibitory activity against the liver stages of the rodent malaria parasite Plasmodium yoelii than its parental glycolipid, α-GalCer. In this study, we demonstrate that NK cells, as well as IL-12, are a key contributor for the superior activity displayed by α-C-GalCer. Surprisingly, the diminished production of Th2 cytokines, including IL-4, by α-C-GalCer has no affect on its superior therapeutic activity relative to α-GalCer. Finally, we show that the in vivo administration of α-C-GalCer induces prolonged maturation of dendritic cells (DCs, as well as an enhanced proliferative response of mouse invariant Vα14 (Vα14i NKT cells, both of which may also contribute to some degree to the superior activity of α-C-GalCer in vivo.

  17. CERES Single Scanner Satellite Footprint, TOA, Surface Fluxes and Clouds (SSF) data in HDF (CER_SSF_TRMM-PFM-VIRS_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The Single Scanner Footprint TOA/Surface Fluxes and Clouds (SSF) product contains one hour of instantaneous Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The SSF combines instantaneous CERES data with scene information from a higher-resolution imager such as Visible/Infrared Scanner (VIRS) on TRMM or Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra and Aqua. Scene identification and cloud properties are defined at the higher imager resolution and these data are averaged over the larger CERES footprint. For each CERES footprint, the SSF contains the number of cloud layers and for each layer the cloud amount, height, temperature, pressure, optical depth, emissivity, ice and liquid water path, and water particle size. The SSF also contains the CERES filtered radiances for the total, shortwave (SW), and window (WN) channels and the unfiltered SW, longwave (LW), and WN radiances. The SW, LW, and WN radiances at spacecraft altitude are converted to Top-of-the-Atmosphere (TOA) fluxes based on the imager defined scene. These TOA fluxes are used to estimate surface fluxes. Only footprints with adequate imager coverage are included on CER_SSF_TRMM-PFM-VIRS_Subset_Edition1the SSF which is much less than the full set of footprints on the CERES ES-8 product. The following CERES SSF data sets are currently available: CER_SSF_TRMM-PFM-VIRS_Edition1 CER_SSF_TRMM-PFM-VIRS_Subset_Edition1 CER_SSF_TRMM-PFM-VIRS_Edition2A CER_SSF_TRMM-SIM-VIRS_Edition2_VIRSonly CER_SSF_TRMM-PFM-VIRS_Edition2A-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition2A CER_SSF_Terra-FM2-MODIS_Edition2A CER_SSF_Terra-FM1-MODIS_Edition2B CER_SSF_Terra-FM2-MODIS_Edition2B CER_SSF_Aqua-FM4-MODIS_Beta1 CER_SSF_Aqua-FM3-MODIS_Beta2 CER_SSF_Aqua-FM4-MODIS_Beta2. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop

  18. Impact of the Clean Development Mechanism on wind energy investments in Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Tunc, Murat; Pak, Ruhan [Yeditepe Univ., Istanbul (Turkey). Systems Engineering Dept.

    2012-12-01

    As carbon trading continues to be implemented on both a national and an international scale, it is becoming an important factor in renewable energy investment decisions. Turkey, with continuous growth of carbon dioxide emission and energy consumption since 2001, ratified the Kyoto Protocol in 2009 and began registration of projects with greenhouse gas reductions in 2010. In light of these developments, wind energy resources with a potential of 48,000 MW are among the most efficient and effective solutions for clean and sustainable energy in Turkey. The aim of our study is to reveal the importance of the Clean Development Mechanism (CDM) of the Kyoto Protocol on wind energy investment decisions. A broad review of wind energy in Turkey is given, and then, a comprehensive feasibility study of a wind energy firm with a valuation model including Certified Emission Reduction (CER) prices is applied to a case study, the Mega Metallurgy Power. With a holistic and interdisciplinary system engineering approach, results are obtained using comprehensive analysis of technology, emission, and power generation of a wind energy firm linked to a valuation model. This comprehensive model sets the investment decision-making criteria, the enterprise value comparison with total financing. Finally, a sensitivity analysis is run to show that the enterprise value is positively correlated with CER prices. Based on these results, it is concluded that if the world's largest carbon offsetting program, the CDM, prevails after 2012, CER prices will have a positive impact on wind energy firm valuations and related investment decisions. (orig.)

  19. Energy Information Augmented Community-Based Energy Reduction

    Directory of Open Access Journals (Sweden)

    Mark Rembert

    2012-06-01

    Full Text Available More than one-half of all U.S. states have instituted energy efficiency mandates requiring utilities to reduce energy use. To achieve these goals, utilities have been permitted rate structures to help them incentivize energy reduction projects. This strategy is proving to be only modestly successful in stemming energy consumption growth. By the same token, community energy reduction programs have achieved moderate to very significant energy reduction. The research described here offers an important tool to strengthen the community energy reduction efforts—by providing such efforts energy information tailored to the energy use patterns of each building occupant. The information provided most importantly helps each individual energy customer understand their potential for energy savings and what reduction measures are most important to them. This information can be leveraged by the leading community organization to prompt greater action in its community. A number of case studies of this model are shown. Early results are promising.

  20. CERES BiDirectional Scans (BDS) data in HDF (CER_BDS_TRMM-PFM_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    Each BiDirectional Scans (BDS) data product contains twenty-four hours of Level-1b data for each CERES scanner instrument mounted on each spacecraft. The BDS includes samples taken in normal and short Earth scan elevation profiles in both fixed and rotating azimuth scan modes (including space, internal calibration, and solar calibration views). The BDS contains Level-0 raw (unconverted) science and instrument data as well as the geolocated converted science and instrument data. The BDS contains additional data not found in the Level-0 input file, including converted satellite position and velocity data, celestial data, converted digital status data, and parameters used in the radiance count conversion equations. The following CERES BDS data sets are currently available: CER_BDS_TRMM-PFM_Edition1 CER_BDS_Terra-FM1_Edition1 CER_BDS_Terra-FM2_Edition1 CER_BDS_Terra-FM1_Edition2 CER_BDS_Terra-FM2_Edition2 CER_BDS_Aqua-FM3_Edition1 CER_BDS_Aqua-FM4_Edition1 CER_BDS_Aqua-FM3_Edition2 CER_BDS_Aqua-FM4_Edition2 CER_BDS_Aqua-FM3_Edition1-CV CER_BDS_Aqua-FM4_Edition1-CV CER_BDS_Terra-FM1_Edition1-CV CER_BDS_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1997-12-27; Stop_Date=2000-12-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 day; Temporal_Resolution_Range=Daily - < Weekly].

  1. Characterization and genetic mapping of eceriferum-ym (cer-ym), a cutin deficient barley mutant with impaired leaf water retention capacity.

    Science.gov (United States)

    Li, Chao; Liu, Cheng; Ma, Xiaoying; Wang, Aidong; Duan, Ruijun; Nawrath, Christiane; Komatsuda, Takao; Chen, Guoxiong

    2015-09-01

    The cuticle covers the aerial parts of land plants, where it serves many important functions, including water retention. Here, a recessive cuticle mutant, eceriferum-ym (cer-ym), of Hordeum vulgare L. (barley) showed abnormally glossy spikes, sheaths, and leaves. The cer-ym mutant plant detached from its root system was hypersensitive to desiccation treatment compared with wild type plants, and detached leaves of mutant lost 41.8% of their initial weight after 1 h of dehydration under laboratory conditions, while that of the wild type plants lost only 7.1%. Stomata function was not affected by the mutation, but the mutant leaves showed increased cuticular permeability to water, suggesting a defective leaf cuticle, which was confirmed by toluidine blue staining. The mutant leaves showed a substantial reduction in the amounts of the major cutin monomers and a slight increase in the main wax component, suggesting that the enhanced cuticle permeability was a consequence of cutin deficiency. cer-ym was mapped within a 0.8 cM interval between EST marker AK370363 and AK251484, a pericentromeric region on chromosome 4H. The results indicate that the desiccation sensitivity of cer-ym is caused by a defect in leaf cutin, and that cer-ym is located in a chromosome 4H pericentromeric region.

  2. Examining the impacts of Feed-in-Tariff and the Clean Development Mechanism on Korea's renewable energy projects through comparative investment analysis

    International Nuclear Information System (INIS)

    Koo, Bonsang

    2017-01-01

    Renewable energy projects in Korea have two avenues that provide subsidies to increase their financial viability. Feed-in-Tariffs (FITs) offer cost based prices for renewable electricity to compete with conventional energy producers. The Clean Development Mechanism (CDM) issues certified emission reduction (CER) credits that generate additional revenues, enhancing renewable projects’ return on investment. This study investigated how these subsidies impact the financial returns on Korea's CDM projects. An investment analysis was performed on four cases including solar, hydropower, wind and landfill gas projects. Revenues from electricity sales, FITs and CERs were compared using financial indicators to measure their relative contributions on profitability. Results indicate that CDM is partial towards large scale projects with high emission reductions. Moreover, conflicts with FIT schemes can deter small scale, capital intensive projects from pursuing registration. The analysis highlights CDM's bias for particular project types, which is in part due to its impartiality towards carbon credit prices. It also reveals that Korea, a key benefactor of CDM, is susceptible to such biases, as demonstrated by the disproportionate distribution of issued CERs. Improving incentives for bundled, small scale projects, CER price differentiation, and excluding domestic subsidies during additionality testing are proposed as possible reforms. - Highlights: • Korea constitute 8.2% of total CERs issued, third largest in the world after China and India. • CDM favors commercially competitive projects of large scale and high emissions. • 91% of issued CERs from GWP gas; of renewables, 88% from landfill gas and wind. • CER revenues marginal for small scale, commercially less attractive projects. • Conflicts with FIT potentially deters small scale projects from registration.

  3. CERES Single Satellite Footprint, TOA and Surface Fluxes, Clouds (SSF) data in HDF (CER_SSF_Aqua-FM4-MODIS_Edition2A)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The Single Scanner Footprint TOA/Surface Fluxes and Clouds (SSF) product contains one hour of instantaneous Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The SSF combines instantaneous CERES data with scene information from a higher-resolution imager such as Visible/Infrared Scanner (VIRS) on TRMM or Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra and Aqua. Scene identification and cloud properties are defined at the higher imager resolution and these data are averaged over the larger CERES footprint. For each CERES footprint, the SSF contains the number of cloud layers and for each layer the cloud amount, height, temperature, pressure, optical depth, emissivity, ice and liquid water path, and water particle size. The SSF also contains the CERES filtered radiances for the total, shortwave (SW), and window (WN) channels and the unfiltered SW, longwave (LW), and WN radiances. The SW, LW, and WN radiances at spacecraft altitude are converted to Top-of-the-Atmosphere (TOA) fluxes based on the imager defined scene. These TOA fluxes are used to estimate surface fluxes. Only footprints with adequate imager coverage are included on CER_SSF_TRMM-PFM-VIRS_Subset_Edition1the SSF which is much less than the full set of footprints on the CERES ES-8 product. The following CERES SSF data sets are currently available: CER_SSF_TRMM-PFM-VIRS_Edition1 CER_SSF_TRMM-PFM-VIRS_Subset_Edition1 CER_SSF_TRMM-PFM-VIRS_Edition2A CER_SSF_TRMM-SIM-VIRS_Edition2_VIRSonly CER_SSF_TRMM-PFM-VIRS_Edition2A-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition2A CER_SSF_Terra-FM2-MODIS_Edition2A CER_SSF_Terra-FM1-MODIS_Edition2B CER_SSF_Terra-FM2-MODIS_Edition2B CER_SSF_Aqua-FM4-MODIS_Beta1 CER_SSF_Aqua-FM3-MODIS_Beta2 CER_SSF_Aqua-FM4-MODIS_Beta2. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop

  4. CERES BiDirectional Scans (BDS) data in HDF (CER_BDS_Terra-FM1_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    Each BiDirectional Scans (BDS) data product contains twenty-four hours of Level-1b data for each CERES scanner instrument mounted on each spacecraft. The BDS includes samples taken in normal and short Earth scan elevation profiles in both fixed and rotating azimuth scan modes (including space, internal calibration, and solar calibration views). The BDS contains Level-0 raw (unconverted) science and instrument data as well as the geolocated converted science and instrument data. The BDS contains additional data not found in the Level-0 input file, including converted satellite position and velocity data, celestial data, converted digital status data, and parameters used in the radiance count conversion equations. The following CERES BDS data sets are currently available: CER_BDS_TRMM-PFM_Edition1 CER_BDS_Terra-FM1_Edition1 CER_BDS_Terra-FM2_Edition1 CER_BDS_Terra-FM1_Edition2 CER_BDS_Terra-FM2_Edition2 CER_BDS_Aqua-FM3_Edition1 CER_BDS_Aqua-FM4_Edition1 CER_BDS_Aqua-FM3_Edition2 CER_BDS_Aqua-FM4_Edition2 CER_BDS_Aqua-FM3_Edition1-CV CER_BDS_Aqua-FM4_Edition1-CV CER_BDS_Terra-FM1_Edition1-CV CER_BDS_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1997-12-27; Stop_Date=2005-11-02] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 day; Temporal_Resolution_Range=Daily - < Weekly].

  5. CERES BiDirectional Scans (BDS) data in HDF (CER_BDS_Aqua-FM3_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    Each BiDirectional Scans (BDS) data product contains twenty-four hours of Level-1b data for each CERES scanner instrument mounted on each spacecraft. The BDS includes samples taken in normal and short Earth scan elevation profiles in both fixed and rotating azimuth scan modes (including space, internal calibration, and solar calibration views). The BDS contains Level-0 raw (unconverted) science and instrument data as well as the geolocated converted science and instrument data. The BDS contains additional data not found in the Level-0 input file, including converted satellite position and velocity data, celestial data, converted digital status data, and parameters used in the radiance count conversion equations. The following CERES BDS data sets are currently available: CER_BDS_TRMM-PFM_Edition1 CER_BDS_Terra-FM1_Edition1 CER_BDS_Terra-FM2_Edition1 CER_BDS_Terra-FM1_Edition2 CER_BDS_Terra-FM2_Edition2 CER_BDS_Aqua-FM3_Edition1 CER_BDS_Aqua-FM4_Edition1 CER_BDS_Aqua-FM3_Edition2 CER_BDS_Aqua-FM4_Edition2 CER_BDS_Aqua-FM3_Edition1-CV CER_BDS_Aqua-FM4_Edition1-CV CER_BDS_Terra-FM1_Edition1-CV CER_BDS_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1997-12-27; Stop_Date=2005-11-02] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 day; Temporal_Resolution_Range=Daily - < Weekly].

  6. CERES BiDirectional Scans (BDS) data in HDF (CER_BDS_Aqua-FM3_Edition2)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    Each BiDirectional Scans (BDS) data product contains twenty-four hours of Level-1b data for each CERES scanner instrument mounted on each spacecraft. The BDS includes samples taken in normal and short Earth scan elevation profiles in both fixed and rotating azimuth scan modes (including space, internal calibration, and solar calibration views). The BDS contains Level-0 raw (unconverted) science and instrument data as well as the geolocated converted science and instrument data. The BDS contains additional data not found in the Level-0 input file, including converted satellite position and velocity data, celestial data, converted digital status data, and parameters used in the radiance count conversion equations. The following CERES BDS data sets are currently available: CER_BDS_TRMM-PFM_Edition1 CER_BDS_Terra-FM1_Edition1 CER_BDS_Terra-FM2_Edition1 CER_BDS_Terra-FM1_Edition2 CER_BDS_Terra-FM2_Edition2 CER_BDS_Aqua-FM3_Edition1 CER_BDS_Aqua-FM4_Edition1 CER_BDS_Aqua-FM3_Edition2 CER_BDS_Aqua-FM4_Edition2 CER_BDS_Aqua-FM3_Edition1-CV CER_BDS_Aqua-FM4_Edition1-CV CER_BDS_Terra-FM1_Edition1-CV CER_BDS_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1997-12-27; Stop_Date=2006-01-01] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 day; Temporal_Resolution_Range=Daily - < Weekly].

  7. CERES BiDirectional Scans (BDS) data in HDF (CER_BDS_Terra-FM2_Edition2)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    Each BiDirectional Scans (BDS) data product contains twenty-four hours of Level-1b data for each CERES scanner instrument mounted on each spacecraft. The BDS includes samples taken in normal and short Earth scan elevation profiles in both fixed and rotating azimuth scan modes (including space, internal calibration, and solar calibration views). The BDS contains Level-0 raw (unconverted) science and instrument data as well as the geolocated converted science and instrument data. The BDS contains additional data not found in the Level-0 input file, including converted satellite position and velocity data, celestial data, converted digital status data, and parameters used in the radiance count conversion equations. The following CERES BDS data sets are currently available: CER_BDS_TRMM-PFM_Edition1 CER_BDS_Terra-FM1_Edition1 CER_BDS_Terra-FM2_Edition1 CER_BDS_Terra-FM1_Edition2 CER_BDS_Terra-FM2_Edition2 CER_BDS_Aqua-FM3_Edition1 CER_BDS_Aqua-FM4_Edition1 CER_BDS_Aqua-FM3_Edition2 CER_BDS_Aqua-FM4_Edition2 CER_BDS_Aqua-FM3_Edition1-CV CER_BDS_Aqua-FM4_Edition1-CV CER_BDS_Terra-FM1_Edition1-CV CER_BDS_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1997-12-27; Stop_Date=2006-01-01] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 day; Temporal_Resolution_Range=Daily - < Weekly].

  8. CERES BiDirectional Scans (BDS) data in HDF (CER_BDS_Aqua-FM4_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    Each BiDirectional Scans (BDS) data product contains twenty-four hours of Level-1b data for each CERES scanner instrument mounted on each spacecraft. The BDS includes samples taken in normal and short Earth scan elevation profiles in both fixed and rotating azimuth scan modes (including space, internal calibration, and solar calibration views). The BDS contains Level-0 raw (unconverted) science and instrument data as well as the geolocated converted science and instrument data. The BDS contains additional data not found in the Level-0 input file, including converted satellite position and velocity data, celestial data, converted digital status data, and parameters used in the radiance count conversion equations. The following CERES BDS data sets are currently available: CER_BDS_TRMM-PFM_Edition1 CER_BDS_Terra-FM1_Edition1 CER_BDS_Terra-FM2_Edition1 CER_BDS_Terra-FM1_Edition2 CER_BDS_Terra-FM2_Edition2 CER_BDS_Aqua-FM3_Edition1 CER_BDS_Aqua-FM4_Edition1 CER_BDS_Aqua-FM3_Edition2 CER_BDS_Aqua-FM4_Edition2 CER_BDS_Aqua-FM3_Edition1-CV CER_BDS_Aqua-FM4_Edition1-CV CER_BDS_Terra-FM1_Edition1-CV CER_BDS_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1997-12-27; Stop_Date=2005-04-02] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 day; Temporal_Resolution_Range=Daily - < Weekly].

  9. CERES BiDirectional Scans (BDS) data in HDF (CER_BDS_Aqua-FM4_Edition2)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    Each BiDirectional Scans (BDS) data product contains twenty-four hours of Level-1b data for each CERES scanner instrument mounted on each spacecraft. The BDS includes samples taken in normal and short Earth scan elevation profiles in both fixed and rotating azimuth scan modes (including space, internal calibration, and solar calibration views). The BDS contains Level-0 raw (unconverted) science and instrument data as well as the geolocated converted science and instrument data. The BDS contains additional data not found in the Level-0 input file, including converted satellite position and velocity data, celestial data, converted digital status data, and parameters used in the radiance count conversion equations. The following CERES BDS data sets are currently available: CER_BDS_TRMM-PFM_Edition1 CER_BDS_Terra-FM1_Edition1 CER_BDS_Terra-FM2_Edition1 CER_BDS_Terra-FM1_Edition2 CER_BDS_Terra-FM2_Edition2 CER_BDS_Aqua-FM3_Edition1 CER_BDS_Aqua-FM4_Edition1 CER_BDS_Aqua-FM3_Edition2 CER_BDS_Aqua-FM4_Edition2 CER_BDS_Aqua-FM3_Edition1-CV CER_BDS_Aqua-FM4_Edition1-CV CER_BDS_Terra-FM1_Edition1-CV CER_BDS_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1997-12-27; Stop_Date=2005-03-29] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 day; Temporal_Resolution_Range=Daily - < Weekly].

  10. Provincial Carbon Emissions Reduction Allocation Plan in China Based on Consumption Perspective

    Directory of Open Access Journals (Sweden)

    Xuecheng Wang

    2018-04-01

    Full Text Available China is a country with substantial differences in economic development, energy consumption mix, resources, and technologies, as well as the development path at the provincial level. Therefore, China’s provinces have different potential and degrees of difficulty to carry out carbon emission reduction (CER requirements. In addition, interprovincial trade, with a large amount of embodied carbon emissions, has become the fastest growing driver of China’s total carbon emissions. A reasonable CER allocation plan is, therefore, crucial for realizing the commitment that China announced in the Paris Agreement. How to determine a fair way to allocate provincial CER duties has become a significant challenge for both policy-makers and researchers. In this paper, ecological network analysis (ENA, combined with a multi-regional input-output model (MRIO, is adopted to build an ecological network of embodied emissions across 30 provinces. Then, by using flow analysis and utility analysis based on the ENA model, the specific relationships among different provinces were determined, and the amount of responsibility that a certain province should take quantified, with respect to the embodied carbon emission (ECE flows from interprovincial trade. As a result, we suggest a new CER allocation plan, based on the detailed data of interprovincial relationships and ECE flows.

  11. CERES Single Scanner Satellite Footprint, TOA, Surface Fluxes and Clouds (SSF) data in HDF (CER_SSF_Aqua-FM4-MODIS_Edition1B)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The Single Scanner Footprint TOA/Surface Fluxes and Clouds (SSF) product contains one hour of instantaneous Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The SSF combines instantaneous CERES data with scene information from a higher-resolution imager such as Visible/Infrared Scanner (VIRS) on TRMM or Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra and Aqua. Scene identification and cloud properties are defined at the higher imager resolution and these data are averaged over the larger CERES footprint. For each CERES footprint, the SSF contains the number of cloud layers and for each layer the cloud amount, height, temperature, pressure, optical depth, emissivity, ice and liquid water path, and water particle size. The SSF also contains the CERES filtered radiances for the total, shortwave (SW), and window (WN) channels and the unfiltered SW, longwave (LW), and WN radiances. The SW, LW, and WN radiances at spacecraft altitude are converted to Top-of-the-Atmosphere (TOA) fluxes based on the imager defined scene. These TOA fluxes are used to estimate surface fluxes. Only footprints with adequate imager coverage are included on CER_SSF_TRMM-PFM-VIRS_Subset_Edition1the SSF which is much less than the full set of footprints on the CERES ES-8 product. The following CERES SSF data sets are currently available: CER_SSF_TRMM-PFM-VIRS_Edition1 CER_SSF_TRMM-PFM-VIRS_Subset_Edition1 CER_SSF_TRMM-PFM-VIRS_Edition2A CER_SSF_TRMM-SIM-VIRS_Edition2_VIRSonly CER_SSF_TRMM-PFM-VIRS_Edition2A-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition2A CER_SSF_Terra-FM2-MODIS_Edition2A CER_SSF_Terra-FM1-MODIS_Edition2B CER_SSF_Terra-FM2-MODIS_Edition2B CER_SSF_Aqua-FM4-MODIS_Beta1 CER_SSF_Aqua-FM3-MODIS_Beta2 CER_SSF_Aqua-FM4-MODIS_Beta2. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop

  12. CERES Single Scanner Satellite Footprint, TOA, Surface Fluxes and Clouds (SSF)- Test data in HDF (CER_SSF_TRMM-PFM-VIRS_Subset-Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The Single Scanner Footprint TOA/Surface Fluxes and Clouds (SSF) product contains one hour of instantaneous Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The SSF combines instantaneous CERES data with scene information from a higher-resolution imager such as Visible/Infrared Scanner (VIRS) on TRMM or Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra and Aqua. Scene identification and cloud properties are defined at the higher imager resolution and these data are averaged over the larger CERES footprint. For each CERES footprint, the SSF contains the number of cloud layers and for each layer the cloud amount, height, temperature, pressure, optical depth, emissivity, ice and liquid water path, and water particle size. The SSF also contains the CERES filtered radiances for the total, shortwave (SW), and window (WN) channels and the unfiltered SW, longwave (LW), and WN radiances. The SW, LW, and WN radiances at spacecraft altitude are converted to Top-of-the-Atmosphere (TOA) fluxes based on the imager defined scene. These TOA fluxes are used to estimate surface fluxes. Only footprints with adequate imager coverage are included on CER_SSF_TRMM-PFM-VIRS_Subset_Edition1the SSF which is much less than the full set of footprints on the CERES ES-8 product. The following CERES SSF data sets are currently available: CER_SSF_TRMM-PFM-VIRS_Edition1 CER_SSF_TRMM-PFM-VIRS_Subset_Edition1 CER_SSF_TRMM-PFM-VIRS_Edition2A CER_SSF_TRMM-SIM-VIRS_Edition2_VIRSonly CER_SSF_TRMM-PFM-VIRS_Edition2A-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition2A CER_SSF_Terra-FM2-MODIS_Edition2A CER_SSF_Terra-FM1-MODIS_Edition2B CER_SSF_Terra-FM2-MODIS_Edition2B CER_SSF_Aqua-FM4-MODIS_Beta1 CER_SSF_Aqua-FM3-MODIS_Beta2 CER_SSF_Aqua-FM4-MODIS_Beta2. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop

  13. CERES Single Scanner Satellite Footprint, TOA, Surface Fluxes and Clouds (SSF) data in HDF (CER_SSF_Terra-FM2-MODIS_Edition2A)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The Single Scanner Footprint TOA/Surface Fluxes and Clouds (SSF) product contains one hour of instantaneous Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The SSF combines instantaneous CERES data with scene information from a higher-resolution imager such as Visible/Infrared Scanner (VIRS) on TRMM or Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra and Aqua. Scene identification and cloud properties are defined at the higher imager resolution and these data are averaged over the larger CERES footprint. For each CERES footprint, the SSF contains the number of cloud layers and for each layer the cloud amount, height, temperature, pressure, optical depth, emissivity, ice and liquid water path, and water particle size. The SSF also contains the CERES filtered radiances for the total, shortwave (SW), and window (WN) channels and the unfiltered SW, longwave (LW), and WN radiances. The SW, LW, and WN radiances at spacecraft altitude are converted to Top-of-the-Atmosphere (TOA) fluxes based on the imager defined scene. These TOA fluxes are used to estimate surface fluxes. Only footprints with adequate imager coverage are included on CER_SSF_TRMM-PFM-VIRS_Subset_Edition1the SSF which is much less than the full set of footprints on the CERES ES-8 product. The following CERES SSF data sets are currently available: CER_SSF_TRMM-PFM-VIRS_Edition1 CER_SSF_TRMM-PFM-VIRS_Subset_Edition1 CER_SSF_TRMM-PFM-VIRS_Edition2A CER_SSF_TRMM-SIM-VIRS_Edition2_VIRSonly CER_SSF_TRMM-PFM-VIRS_Edition2A-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition2A CER_SSF_Terra-FM2-MODIS_Edition2A CER_SSF_Terra-FM1-MODIS_Edition2B CER_SSF_Terra-FM2-MODIS_Edition2B CER_SSF_Aqua-FM4-MODIS_Beta1 CER_SSF_Aqua-FM3-MODIS_Beta2 CER_SSF_Aqua-FM4-MODIS_Beta2. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop

  14. CERES Single Scanner Satellite Footprint, TOA, Surface Fluxes and Clouds (SSF) data in HDF (CER_SSF_Terra-FM1-MODIS_Edition2A)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The Single Scanner Footprint TOA/Surface Fluxes and Clouds (SSF) product contains one hour of instantaneous Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The SSF combines instantaneous CERES data with scene information from a higher-resolution imager such as Visible/Infrared Scanner (VIRS) on TRMM or Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra and Aqua. Scene identification and cloud properties are defined at the higher imager resolution and these data are averaged over the larger CERES footprint. For each CERES footprint, the SSF contains the number of cloud layers and for each layer the cloud amount, height, temperature, pressure, optical depth, emissivity, ice and liquid water path, and water particle size. The SSF also contains the CERES filtered radiances for the total, shortwave (SW), and window (WN) channels and the unfiltered SW, longwave (LW), and WN radiances. The SW, LW, and WN radiances at spacecraft altitude are converted to Top-of-the-Atmosphere (TOA) fluxes based on the imager defined scene. These TOA fluxes are used to estimate surface fluxes. Only footprints with adequate imager coverage are included on CER_SSF_TRMM-PFM-VIRS_Subset_Edition1the SSF which is much less than the full set of footprints on the CERES ES-8 product. The following CERES SSF data sets are currently available: CER_SSF_TRMM-PFM-VIRS_Edition1 CER_SSF_TRMM-PFM-VIRS_Subset_Edition1 CER_SSF_TRMM-PFM-VIRS_Edition2A CER_SSF_TRMM-SIM-VIRS_Edition2_VIRSonly CER_SSF_TRMM-PFM-VIRS_Edition2A-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition2A CER_SSF_Terra-FM2-MODIS_Edition2A CER_SSF_Terra-FM1-MODIS_Edition2B CER_SSF_Terra-FM2-MODIS_Edition2B CER_SSF_Aqua-FM4-MODIS_Beta1 CER_SSF_Aqua-FM3-MODIS_Beta2 CER_SSF_Aqua-FM4-MODIS_Beta2. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop

  15. CERES Single Scanner Satellite Footprint, TOA, Surface Fluxes and Clouds (SSF) data in HDF (CER_SSF_Terra-FM2-MODIS_Edition2B)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The Single Scanner Footprint TOA/Surface Fluxes and Clouds (SSF) product contains one hour of instantaneous Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The SSF combines instantaneous CERES data with scene information from a higher-resolution imager such as Visible/Infrared Scanner (VIRS) on TRMM or Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra and Aqua. Scene identification and cloud properties are defined at the higher imager resolution and these data are averaged over the larger CERES footprint. For each CERES footprint, the SSF contains the number of cloud layers and for each layer the cloud amount, height, temperature, pressure, optical depth, emissivity, ice and liquid water path, and water particle size. The SSF also contains the CERES filtered radiances for the total, shortwave (SW), and window (WN) channels and the unfiltered SW, longwave (LW), and WN radiances. The SW, LW, and WN radiances at spacecraft altitude are converted to Top-of-the-Atmosphere (TOA) fluxes based on the imager defined scene. These TOA fluxes are used to estimate surface fluxes. Only footprints with adequate imager coverage are included on CER_SSF_TRMM-PFM-VIRS_Subset_Edition1the SSF which is much less than the full set of footprints on the CERES ES-8 product. The following CERES SSF data sets are currently available: CER_SSF_TRMM-PFM-VIRS_Edition1 CER_SSF_TRMM-PFM-VIRS_Subset_Edition1 CER_SSF_TRMM-PFM-VIRS_Edition2A CER_SSF_TRMM-SIM-VIRS_Edition2_VIRSonly CER_SSF_TRMM-PFM-VIRS_Edition2A-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition2A CER_SSF_Terra-FM2-MODIS_Edition2A CER_SSF_Terra-FM1-MODIS_Edition2B CER_SSF_Terra-FM2-MODIS_Edition2B CER_SSF_Aqua-FM4-MODIS_Beta1 CER_SSF_Aqua-FM3-MODIS_Beta2 CER_SSF_Aqua-FM4-MODIS_Beta2. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop

  16. Monomer-dimer control of the ColE1 P(cer) promoter.

    Science.gov (United States)

    Chatwin, H M; Summers, D K

    2001-11-01

    XerCD-mediated recombination at cer converts multimers of plasmid ColE1 to monomers, maximizing the number of independently segregating molecules and minimizing the frequency of plasmid loss. In addition to XerCD, recombination requires the accessory factors ArgR and PepA. The promoter P(cer), located centrally within cer, is also required for stable plasmid maintenance. P(cer) is active in plasmid multimers and directs transcription of a short RNA, Rcd, which appears to inhibit cell division. It has been proposed that Rcd is part of a checkpoint which ensures that multimer resolution is complete before the cell divides. This study has shown that ArgR does not act as a transcriptional repressor of P(cer) in plasmid monomers. P(cer) is unusual in that the -35 and -10 hexamers are separated by only 15 bp and this study has demonstrated that increasing this to a more conventional spacing results in elevated activity. An increase to 17 bp resulted in a 10- to 20-fold increase in activity, while smaller effects were seen when the spacer was increased to 16 bp or 18 bp. These observations are consistent with the hypothesis that P(cer) activation involves realignment of the -35 and -10 sequences within a recombinational synaptic complex. This predicts that a 17 bp spacer promoter derivative should be down-regulated by plasmid multimerization, and this is confirmed experimentally.

  17. CER. Research reactors in France

    International Nuclear Information System (INIS)

    Estrade, Jerome

    2012-01-01

    Networking and the establishment of coalitions between research reactors are important to guarantee a high technical quality of the facility, to assure well educated and trained personnel, to harmonize the codes of standards and the know-ledge of the personnel as well as to enhance research reactor utilization. In addition to the European co-operation, country-specific working groups have been established for many years, such as the French research reactor Club d'Exploitants des Reacteurs (CER). It is the association of French research reactors representing all types of research reactors from zero power up to high flux reactors. CER was founded in 1990 and today a number of 14 research reactors meet twice a year for an exchange of experience. (orig.)

  18. CERES Single Satellite Footprint, TOA and Surface Fluxes, Clouds (SSF) data in HDF (CER_SSF_Aqua-FM4-MODIS_Ed2A-NoSW)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The Single Scanner Footprint TOA/Surface Fluxes and Clouds (SSF) product contains one hour of instantaneous Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The SSF combines instantaneous CERES data with scene information from a higher-resolution imager such as Visible/Infrared Scanner (VIRS) on TRMM or Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra and Aqua. Scene identification and cloud properties are defined at the higher imager resolution and these data are averaged over the larger CERES footprint. For each CERES footprint, the SSF contains the number of cloud layers and for each layer the cloud amount, height, temperature, pressure, optical depth, emissivity, ice and liquid water path, and water particle size. The SSF also contains the CERES filtered radiances for the total, shortwave (SW), and window (WN) channels and the unfiltered SW, longwave (LW), and WN radiances. The SW, LW, and WN radiances at spacecraft altitude are converted to Top-of-the-Atmosphere (TOA) fluxes based on the imager defined scene. These TOA fluxes are used to estimate surface fluxes. Only footprints with adequate imager coverage are included on CER_SSF_TRMM-PFM-VIRS_Subset_Edition1the SSF which is much less than the full set of footprints on the CERES ES-8 product. The following CERES SSF data sets are currently available: CER_SSF_TRMM-PFM-VIRS_Edition1 CER_SSF_TRMM-PFM-VIRS_Subset_Edition1 CER_SSF_TRMM-PFM-VIRS_Edition2A CER_SSF_TRMM-SIM-VIRS_Edition2_VIRSonly CER_SSF_TRMM-PFM-VIRS_Edition2A-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B-TransOps CER_SSF_TRMM-PFM-VIRS_Edition2B CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition1A CER_SSF_Terra-FM1-MODIS_Edition2A CER_SSF_Terra-FM2-MODIS_Edition2A CER_SSF_Terra-FM1-MODIS_Edition2B CER_SSF_Terra-FM2-MODIS_Edition2B CER_SSF_Aqua-FM4-MODIS_Beta1 CER_SSF_Aqua-FM3-MODIS_Beta2 CER_SSF_Aqua-FM4-MODIS_Beta2. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop

  19. Walking the CER Path.

    Science.gov (United States)

    Adams, Katherine T

    2009-08-01

    Evidence-based medicine has been a rallying cry for payers, but an inability to define value, conflicting clinical trial designs, physician practice variations, and payment incentives confound efforts to make EBM go mainstream. CER may give EBM some legs - just as the biologics pipeline is about to overflow.

  20. Unresolved tensions in consumer engagement in CER: a US research perspective.

    Science.gov (United States)

    Workman, Thomas; Maurer, Maureen; Carman, Kristin

    2013-03-01

    Efforts to engage patients and consumers in comparative effectiveness research (CER) in the USA are still in the early stages, and the outcomes of these partnerships have yet to be fully understood or realized. Our work assisting federal agencies and national organizations who engage patients and consumers in CER reveal three unresolved tensions around the representation of the patient experience in the research process, the culture of research and capacity to partner with patients and consumers, and the conflict between the methodological approaches to CER and the outcomes of interest to patients and caregivers. Several approaches to address these tensions have emerged, yet resolving these tensions will require addressing many system-level challenges and building an evidence base for consumer engagement in CER.

  1. Revstimentos cerâmicos aderentes de paredes

    OpenAIRE

    Borges, Rui Jorge Nóbrega

    2013-01-01

    O objetivo geral desta dissertação consistiu num levantamento exaustivo do tipo e caraterísticas de ladrilhos cerâmicos, utilizados no revestimento de paredes, existentes no nosso mercado. Os ladrilhos cerâmicos continuam a ser o revestimento mais utilizado na construção de edifícios em Portugal, visto que, há grande tradição na utilização de ladrilhos colados como revestimento de fachadas, e cada vez mais como revestimento de pavimentos, sistemas que tem uma elevada durabilidade quando corre...

  2. CERES BiDirectional Scans (BDS) data in HDF (CER_BDS_Terra-FM1_Edition1-CV)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    Each BiDirectional Scans (BDS) data product contains twenty-four hours of Level-1b data for each CERES scanner instrument mounted on each spacecraft. The BDS includes samples taken in normal and short Earth scan elevation profiles in both fixed and rotating azimuth scan modes (including space, internal calibration, and solar calibration views). The BDS contains Level-0 raw (unconverted) science and instrument data as well as the geolocated converted science and instrument data. The BDS contains additional data not found in the Level-0 input file, including converted satellite position and velocity data, celestial data, converted digital status data, and parameters used in the radiance count conversion equations. The following CERES BDS data sets are currently available: CER_BDS_TRMM-PFM_Edition1 CER_BDS_Terra-FM1_Edition1 CER_BDS_Terra-FM2_Edition1 CER_BDS_Terra-FM1_Edition2 CER_BDS_Terra-FM2_Edition2 CER_BDS_Aqua-FM3_Edition1 CER_BDS_Aqua-FM4_Edition1 CER_BDS_Aqua-FM3_Edition2 CER_BDS_Aqua-FM4_Edition2 CER_BDS_Aqua-FM3_Edition1-CV CER_BDS_Aqua-FM4_Edition1-CV CER_BDS_Terra-FM1_Edition1-CV CER_BDS_Terra-FM2_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1997-12-27; Stop_Date=2006-11-02] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 day; Temporal_Resolution_Range=Daily - < Weekly].

  3. Approaches to answering critical CER questions.

    Science.gov (United States)

    Kinnier, Christine V; Chung, Jeanette W; Bilimoria, Karl Y

    2015-01-01

    While randomized controlled trials (RCTs) are the gold standard for research, many research questions cannot be ethically and practically answered using an RCT. Comparative effectiveness research (CER) techniques are often better suited than RCTs to address the effects of an intervention under routine care conditions, an outcome otherwise known as effectiveness. CER research techniques covered in this section include: effectiveness-oriented experimental studies such as pragmatic trials and cluster randomized trials, treatment response heterogeneity, observational and database studies including adjustment techniques such as sensitivity analysis and propensity score analysis, systematic reviews and meta-analysis, decision analysis, and cost effectiveness analysis. Each section describes the technique and covers the strengths and weaknesses of the approach.

  4. Development of CER-001: Preclinical Dose Selection Through to Phase I Clinical Findings.

    Science.gov (United States)

    Keyserling, Constance H; Barbaras, Ronald; Benghozi, Renee; Dasseux, Jean-Louis

    2017-05-01

    CER-001 comprises recombinant human apolipoprotein A-I complexed with phospholipids that mimics natural, nascent, pre-β high-density lipoprotein (HDL). We present animal model data showing dose-dependent increases in cholesterol efflux with CER-001 and its subsequent elimination by reverse lipid transport, together with inhibition of atherosclerotic plaque progression. We report the first phase I study results with CER-001 in humans, starting at 0.25 mg/kg, which is 1/80th of the safe dose (20 mg/kg) established in 4-week multiple-dose animal studies dosed every second day. Healthy volunteers, 18-55 years old with a low-density lipoprotein-cholesterol:HDL-cholesterol ratio greater than 3.0, received single intravenous escalating doses of CER-001 (0.25-45.0 mg/kg) and placebo in a double-blind randomised cross-over fashion. Subjects were followed up for 3 weeks post-dose. Assessments included adverse event monitoring, blood sampling, and clinical laboratory measurements. Thirty-two subjects were enrolled. All CER-001 doses (0.25-45 mg/kg) were safe and well tolerated, with an adverse event profile similar to placebo. Effects on clinical chemistry, haematology and coagulation parameters were comparable to placebo. No adverse effects of CER-001 on electrocardiograms were observed. No antibodies to apolipoprotein A-I were detected following single-dose administration of CER-001. Plasma apolipoprotein A-I levels increased in a dose-related manner and returned to baseline by 24 h post-dose for doses up to 10 mg/kg but remained in circulation for >72 h post-dose for doses >10 mg/kg. CER-001 caused elevations in plasma cholesterol and total and unesterified cholesterol in the HDL fraction. Mobilisation of unesterified cholesterol in the HDL fraction was seen with CER-001 at doses as low as 2 mg/kg. CER-001 is well tolerated when administered to humans as single doses up to 45 mg/kg and mobilises and eliminates cholesterol via reverse lipid transport.

  5. Got CER? Educating Pharmacists for Practice in the Future: New Tools for New Challenges.

    Science.gov (United States)

    Perfetto, Eleanor M; Anyanwu, Chinenye; Pickering, Matthew K; Zaghab, Roxanne Ward; Graff, Jennifer S; Eichelberger, Bernadette

    2016-06-01

    Understanding how treatments work in the real world and in real patients is an important and complex task. In recent years, comparative effectiveness research (CER) studies have become more available for health care providers to inform evidence-based decision making. There is variability in the strengths and limitations of this new evidence, and researchers and decision makers are faced with challenges when assessing the quality of these new methods and CER studies. To (a) describe an online tool developed by the CER Collaborative, composed of the Academy of Managed Care Pharmacy, the International Society for Pharmacoeconomics and Outcomes Research, and the National Pharmaceutical Council, and (b) provide an early evaluation of the training program impact on learners' self-reported abilities to evaluate and incorporate CER studies into their decision making. To encourage greater transparency, consistency, and uniformity in the development and assessment of CER studies, the CER Collaborative developed an online tool to assist researchers, new and experienced clinicians, and decision makers in producing and evaluating CER studies. A training program that supports the use of the online tool was developed to improve the ability and confidence of individuals to apply CER study findings in their daily work. Seventy-one health care professionals enrolled in 3 separate cohorts for the training program. Upon completion, learners assessed their abilities to interpret and apply findings from CER studies by completing on online evaluation questionnaire. The first 3 cohorts of learners to complete the training program consisted of 71 current and future health care practitioners and researchers. At completion, learners indicated high confidence in their CER evidence assessment abilities (mean = 4.2). Learners reported a 27.43%-59.86% improvement in capabilities to evaluate various CER studies and identify study design flaws (mean evaluation before CER Certificate Program [CCP

  6. PCOR, CER, and CBPR: alphabet soup or complementary fields of health research?

    Science.gov (United States)

    Burke, Jessica G; Jones, Jennifer; Yonas, Michael; Guizzetti, Lisa; Virata, Maria C; Costlow, Monica; Morton, Sally C; Elizabeth, Miller

    2013-12-01

    Comparative effectiveness research (CER) and community- based participatory research (CBPR) are two fields of research that do not have a history of strong collaboration. However, CER and CBPR researchers could benefit from interdisciplinary collaboration to design and implement relevant, timely, action-oriented research. This commentary explores field-specific definitions of stakeholders and then outlines various roles stakeholders might play within grant-funded research. Questions such as "What stakeholders should be involved?" and "How are stakeholders involved?" are addressed. The goal of this commentary is to highlight how the expertise and experiences of CBPR investigators can enhance the field of CER and to describe strategies for encouraging stakeholder involvement in CER research through the lens of CBPR. It is recommended that a team-based approach to conducting stakeholder-engaged CER encourages multiple stakeholders and "end users" to contribute their diverse expertise to the research process and contributes to the development of research with an increased likelihood of improving patient health and healthcare. © 2013 Wiley Periodicals, Inc.

  7. The behaviour under irradiation of molybdenum matrix for inert matrix fuel containing americium oxide (CerMet concept)

    Energy Technology Data Exchange (ETDEWEB)

    D' Agata, E., E-mail: elio.dagata@ec.europa.eu [European Commission, Joint Research Centre, Institute for Energy and Transport, P.O. Box 2, 1755 ZG Petten (Netherlands); Knol, S.; Fedorov, A.V. [Nuclear Research and Consultancy Group, P.O. Box 25, 1755 ZG Petten (Netherlands); Fernandez, A.; Somers, J. [European Commission, Joint Research Centre, Institute for Transuranium Elements, P.O. Box 2340, 76125 Karlsruhe (Germany); Klaassen, F. [Nuclear Research and Consultancy Group, P.O. Box 25, 1755 ZG Petten (Netherlands)

    2015-10-15

    Americium is a strong contributor to the long term radiotoxicity of high activity nuclear waste. Transmutation by irradiation in nuclear reactors or Accelerator Driven System (ADS, subcritical reactors dedicated to transmutation) of long-lived nuclides like {sup 241}Am is therefore an option for the reduction of radiotoxicity of waste packages to be stored in a repository. In order to safely burn americium in a fast reactor or ADS, it must be incorporated in a matrix that could be metallic (CerMet target) or ceramic (CerCer target). One of the most promising matrix to incorporate Am is molybdenum. In order to address the issues (swelling, stability under irradiation, gas retention and release) of using Mo as matrix to transmute Am, two irradiation experiments have been conducted recently at the High Flux Reactor (HFR) in Petten (The Netherland) namely HELIOS and BODEX. The BODEX experiment is a separate effect test, where the molybdenum behaviour is studied without the presence of fission products using {sup 10}B to “produce” helium, the HELIOS experiment included a more representative fuel target with the presence of Am and fission product. This paper covers the results of Post Irradiation Examination (PIE) of the two irradiation experiments mentioned above where molybdenum behaviour has been deeply investigated as possible matrix to transmute americium (CerMet fuel target). The behaviour of molybdenum looks satisfying at operating temperature but at high temperature (above 1000 °C) more investigation should be performed.

  8. CERES ERBE-like Instantaneous TOA Estimates (ES-8) in HDF (CER_ES8_TRMM-PFM_Edition2)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ES-8 archival data product contains a 24-hour, single-satellite, instantaneous view of scanner fluxes at the top-of-atmosphere (TOA) reduced from spacecraft altitude unfiltered radiances using Earth Radiation Budget Experiment (ERBE) scanner Inversion algorithms and the ERBE shortwave (SW) and longwave (LW) Angular Distribution Models (ADMs). The ES-8 also includes the total (TOT), SW, LW, and window (WN) channel radiometric data; SW, LW, and WN unfiltered radiance values; and the ERBE scene identification for each measurement. These data are organized according to the CERES 3.3-second scan into 6.6-second records. As long as there is one valid scanner measurement within a record, the ES-8 record will be generated. The following CERES ES8 data sets are currently available: CER_ES8_TRMM-PFM_Edition1 CER_ES8_TRMM-PFM_Edition2 CER_ES8_TRMM-PFM_Transient-Ops2 CER_ES8_Terra-FM1_Edition1 CER_ES8_Terra-FM2_Edition1 CER_ES8_Terra-FM1_Edition2 CER_ES8_Terra-FM2_Edition2 CER_ES8_Aqua-FM3_Edition1 CER_ES8_Aqua-FM4_Edition1 CER_ES8_Aqua-FM3_Edition2 CER_ES8_Aqua-FM4_Edition2 CER_ES8_Aqua-FM3_Edition1-CV CER_ES8_Aqua-FM4_Edition1-CV CER_ES8_Terra-FM1_Edition1-CV CER_ES8_Terra-FM1_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1997-12-27; Stop_Date=2000-03-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 day; Temporal_Resolution_Range=Daily - < Weekly].

  9. Sinterização de cerâmicas à base de PZT em forno de microondas Microwave synthesis of PZT based ceramics

    Directory of Open Access Journals (Sweden)

    M. V. Gelfuso

    2007-09-01

    Full Text Available Cerâmicas de titanato e zirconato de chumbo dopadas com neodímio foram sinterizadas em um forno de microondas de uso doméstico modificado. Neste tipo de aquecimento, a energia eletromagnética é transferida diretamente para o material, sendo convertida em calor pelo material cerâmico, reduzindo o tempo e energia durante o processamento. Desta forma, foram produzidos corpos cerâmicos com tempo de sinterização que variou até 30 min, a 1100 e 1200 ºC. As fases foram investigadas por meio de difratometria de raios X. Corpos cerâmicos com densidade de 95% da teórica foram obtidos com tempo de sinterização de 10 min em 1100 ºC, com uma taxa de aquecimento de 400 ºC/min. Para as cerâmicas com densidade superior a 90% da teórica foram medidos os valores de constante dielétrica e fator de perda.Ferroelectric ceramics based on lead zirconate titanate doped with neodymium were sintered using a modified microwave oven. In this process the energy is transferred directly to the material through the interaction between molecules of the material with the electromagnetic field. The microwave sintering process has an advantage to reduce the time and save energy. This type of process involves energy conversion, opposing to heat transfer. Ceramic parts were produced by thermal treatments at 1100 ºC and 1200 ºC up to 30 min. The formed crystalline phases were investigated by X-ray diffraction. Ceramic parts with densities above 95% of the theoretical density were produced in 10 min by heating at 1100 ºC, with heating rate of 400 ºC/min. Values of dielectric constant and loss factor of ceramics with density above 90%T.D. were determined.

  10. Practical guide to understanding Comparative Effectiveness Research (CER).

    Science.gov (United States)

    Neely, J Gail; Sharon, Jeffrey D; Graboyes, Evan M; Paniello, Randal C; Nussenbaum, Brian; Grindler, David J; Dassopoulos, Themistocles

    2013-12-01

    "Comparative effectiveness research" (CER) is not a new concept; however, recently it has been popularized as a method to develop scientifically sound actionable data by which patients, physicians, payers, and policymakers may make informed health care decisions. Fundamental to CER is that the comparative data are derived from large diverse populations of patients assembled from point-of-care general primary care practices and that measured outcomes include patient value judgments. The challenge is to obtain scientifically valid data to be acted upon by decision-making stakeholders with potentially quite diversely different agenda. The process requires very thoughtful research designs modulated by complex statistical and analytic methods. This article is composed of a guiding narrative with an extensive set of tables outlining many of the details required in performing and understanding CER. It ends with short discussions of three example papers, limitations of the method, and how a practicing physician may view such reports.

  11. Impact of the long chain omega-acylceramides on the stratum corneum lipid nanostructure. Part 1: Thermotropic phase behaviour of CER[EOS] and CER[EOP] studied using X-ray powder diffraction and FT-Raman spectroscopy.

    Science.gov (United States)

    Kessner, Doreen; Brezesinski, Gerald; Funari, Sergio S; Dobner, Bodo; Neubert, Reinhard H H

    2010-01-01

    The stratum corneum (SC), the outermost layer of the mammalian skin, is the main skin barrier. Ceramides (CERs) as the major constituent of the SC lipid matrix are of particular interest. At the moment, 11 classes of CERs are identified, but the effect of each single ceramide species is still not known. Therefore in this article, the thermotropic behaviour of the long chain omega-acylceramides CER[EOS] and CER[EOP] was studied using X-ray powder diffraction and FT-Raman spectroscopy. It was found that the omega-acylceramides CER[EOS] and CER[EOP] do not show a pronounced polymorphism which is observed for shorter chain ceramides as a significant feature. The phase behaviour of both ceramides is strongly influenced by the extremely long acyl-chain residue. The latter has a much stronger influence compared with the structure of the polar head group, which is discussed as extremely important for the appearance of a rich polymorphism. Despite the strong influence of the long chain, the additional OH-group of the phyto-sphingosine type CER[EOP] influences the lamellar repeat distance and the chain packing. The less polar sphingosine type CER[EOS] is stronger influenced by the long acyl-chain residue. Hydration is necessary for the formation of an extended hydrogen-bonding network between the polar head groups leading to the appearance of a long-periodicity phase (LPP). In contrast, the more polar CER[EOP] forms the LPP with densely packed alkyl chains already in the dry state.

  12. Uso de rejeitos de granitos como matérias-primas cerâmicas

    Directory of Open Access Journals (Sweden)

    Menezes R. R.

    2002-01-01

    Full Text Available A indústria do beneficiamento de granito gera uma enorme quantidade de rejeitos, que poluem e degradam o meio ambiente. Assim este trabalho tem por objetivo caracterizar e avaliar as possibilidades de utilização dos rejeitos da serragem de granitos gerados pelas indústrias de beneficiamento da Região Nordeste, como matéria-prima cerâmica alternativa na produção de blocos e revestimentos cerâmicos. Foram coletadas amostras de resíduos da serragem de granito em empresas da Paraíba, Ceará e Pernambuco, em seguida foi realizada sua caracterização através da determinação da distribuição granulométrica, massa específica real e área específica (BET e de análise química, ATD, ATG, DRX, MEV. Após caracterização foram conduzidos ensaios tecnológicos com composições cerâmicas a fim de avaliar a possibilidade de adição dos resíduos em massas cerâmicas para confecção de blocos e revestimentos cerâmicos. Com base nos resultados verificou-se que os resíduos apresentam características físicas e mineralógicas semelhantes as das matérias-primas cerâmicas convencionais e que corpos cerâmicos formulados com resíduos apresentam características dentro das especificações da normalização brasileira tanto para blocos como para revestimentos cerâmicos.

  13. CERES ERBE-like Instantaneous TOA Estimates (ES-8) in HDF (CER_ES8_Terra-FM1_Edition2)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ES-8 archival data product contains a 24-hour, single-satellite, instantaneous view of scanner fluxes at the top-of-atmosphere (TOA) reduced from spacecraft altitude unfiltered radiances using Earth Radiation Budget Experiment (ERBE) scanner Inversion algorithms and the ERBE shortwave (SW) and longwave (LW) Angular Distribution Models (ADMs). The ES-8 also includes the total (TOT), SW, LW, and window (WN) channel radiometric data; SW, LW, and WN unfiltered radiance values; and the ERBE scene identification for each measurement. These data are organized according to the CERES 3.3-second scan into 6.6-second records. As long as there is one valid scanner measurement within a record, the ES-8 record will be generated. The following CERES ES8 data sets are currently available: CER_ES8_TRMM-PFM_Edition1 CER_ES8_TRMM-PFM_Edition2 CER_ES8_TRMM-PFM_Transient-Ops2 CER_ES8_Terra-FM1_Edition1 CER_ES8_Terra-FM2_Edition1 CER_ES8_Terra-FM1_Edition2 CER_ES8_Terra-FM2_Edition2 CER_ES8_Aqua-FM3_Edition1 CER_ES8_Aqua-FM4_Edition1 CER_ES8_Aqua-FM3_Edition2 CER_ES8_Aqua-FM4_Edition2 CER_ES8_Aqua-FM3_Edition1-CV CER_ES8_Aqua-FM4_Edition1-CV CER_ES8_Terra-FM1_Edition1-CV CER_ES8_Terra-FM1_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1997-12-27; Stop_Date=2006-01-01] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 day; Temporal_Resolution_Range=Daily - < Weekly].

  14. CERES ERBE-like Instantaneous TOA Estimates (ES-8) in HDF (CER_ES8_Terra-FM2_Edition1)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ES-8 archival data product contains a 24-hour, single-satellite, instantaneous view of scanner fluxes at the top-of-atmosphere (TOA) reduced from spacecraft altitude unfiltered radiances using Earth Radiation Budget Experiment (ERBE) scanner Inversion algorithms and the ERBE shortwave (SW) and longwave (LW) Angular Distribution Models (ADMs). The ES-8 also includes the total (TOT), SW, LW, and window (WN) channel radiometric data; SW, LW, and WN unfiltered radiance values; and the ERBE scene identification for each measurement. These data are organized according to the CERES 3.3-second scan into 6.6-second records. As long as there is one valid scanner measurement within a record, the ES-8 record will be generated. The following CERES ES8 data sets are currently available: CER_ES8_TRMM-PFM_Edition1 CER_ES8_TRMM-PFM_Edition2 CER_ES8_TRMM-PFM_Transient-Ops2 CER_ES8_Terra-FM1_Edition1 CER_ES8_Terra-FM2_Edition1 CER_ES8_Terra-FM1_Edition2 CER_ES8_Terra-FM2_Edition2 CER_ES8_Aqua-FM3_Edition1 CER_ES8_Aqua-FM4_Edition1 CER_ES8_Aqua-FM3_Edition2 CER_ES8_Aqua-FM4_Edition2 CER_ES8_Aqua-FM3_Edition1-CV CER_ES8_Aqua-FM4_Edition1-CV CER_ES8_Terra-FM1_Edition1-CV CER_ES8_Terra-FM1_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1997-12-27; Stop_Date=2005-11-01] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 day; Temporal_Resolution_Range=Daily - < Weekly].

  15. CERES ERBE-like Instantaneous TOA Estimates (ES-8) in HDF (CER_ES8_Aqua-FM3_Edition2)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ES-8 archival data product contains a 24-hour, single-satellite, instantaneous view of scanner fluxes at the top-of-atmosphere (TOA) reduced from spacecraft altitude unfiltered radiances using Earth Radiation Budget Experiment (ERBE) scanner Inversion algorithms and the ERBE shortwave (SW) and longwave (LW) Angular Distribution Models (ADMs). The ES-8 also includes the total (TOT), SW, LW, and window (WN) channel radiometric data; SW, LW, and WN unfiltered radiance values; and the ERBE scene identification for each measurement. These data are organized according to the CERES 3.3-second scan into 6.6-second records. As long as there is one valid scanner measurement within a record, the ES-8 record will be generated. The following CERES ES8 data sets are currently available: CER_ES8_TRMM-PFM_Edition1 CER_ES8_TRMM-PFM_Edition2 CER_ES8_TRMM-PFM_Transient-Ops2 CER_ES8_Terra-FM1_Edition1 CER_ES8_Terra-FM2_Edition1 CER_ES8_Terra-FM1_Edition2 CER_ES8_Terra-FM2_Edition2 CER_ES8_Aqua-FM3_Edition1 CER_ES8_Aqua-FM4_Edition1 CER_ES8_Aqua-FM3_Edition2 CER_ES8_Aqua-FM4_Edition2 CER_ES8_Aqua-FM3_Edition1-CV CER_ES8_Aqua-FM4_Edition1-CV CER_ES8_Terra-FM1_Edition1-CV CER_ES8_Terra-FM1_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1997-12-27; Stop_Date=2005-12-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 day; Temporal_Resolution_Range=Daily - < Weekly].

  16. Compensatory mechanisms activated with intermittent energy restriction: A randomized control trial.

    Science.gov (United States)

    Coutinho, Sílvia Ribeiro; Halset, Eline Holli; Gåsbakk, Sigrid; Rehfeld, Jens F; Kulseng, Bård; Truby, Helen; Martins, Cátia

    2018-06-01

    Strong compensatory responses, with reduced resting metabolic rate (RMR), increased exercise efficiency (ExEff) and appetite, are activated when weight loss (WL) is achieved with continuous energy restriction (CER), which try to restore energy balance. Intermittent energy restriction (IER), where short spells of energy restriction are interspaced by periods of habitual energy intake, may offer some protection in minimizing those responses. We aimed to compare the effect of IER versus CER on body composition and the compensatory responses induced by WL. 35 adults (age: 39 ± 9 y) with obesity (BMI: 36 ± 4 kg/m 2 ) were randomized to lose a similar weight with an IER (N = 18) or a CER (N = 17) diet over a 12 week period. Macronutrient composition and overall energy restriction (33% reduction) were similar between groups. Body weight/composition, RMR, fasting respiratory quotient (RQ), ExEff (10, 25, and 50 W), subjective appetite ratings (hunger, fullness, desire to eat, and prospective food consumption (PFC)), and appetite-regulating hormones (active ghrelin (AG), cholecystokinin (CCK), total peptide YY (PYY), active glucagon-like peptide-1 (GLP-1), and insulin) were measured before and after WL. Changes in body weight (≈12.5% WL) and composition were similar in both groups. Fasting RQ and ExEff at 10 W increased in both groups. Losing weight, either by IER or CER dieting, did not induce significant changes in subjective appetite ratings. RMR decreased and ExEff at 25 and 50 W increased (P intermittent, does not appear to modulate the compensatory mechanisms activated by weight loss. NCT02169778 (the study was registered in clinicaltrial.gov). Copyright © 2017 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

  17. Could Intermittent Energy Restriction and Intermittent Fasting Reduce Rates of Cancer in Obese, Overweight, and Normal-Weight Subjects? A Summary of Evidence12

    Science.gov (United States)

    2016-01-01

    Animal studies and human observational data link energy restriction (ER) to reduced rates of carcinogenesis. Most of these studies have involved continuous energy restriction (CER), but there is increasing public and scientific interest in the potential health and anticancer effects of intermittent energy restriction (IER) or intermittent fasting (IF), which comprise periods of marked ER or total fasting interspersed with periods of normal eating. This review summarizes animal studies that assessed tumor rates with IER and IF compared with CER or ad libitum feed consumption. The relevance of these animal data to human cancer is also considered by summarizing available human studies of the effects of IER or IF compared with CER on cancer biomarkers in obese, overweight, and normal-weight subjects. IER regimens that include periods of ER alternating with ad libitum feed consumption for 1, 2, or 3 wk have been reported to be superior to CER in reducing tumor rates in most spontaneous mice tumor models. Limited human data from short-term studies (≤6 mo) in overweight and obese subjects have shown that IER can lead to greater improvements in insulin sensitivity (homeostasis model assessment) than can CER, with comparable reductions in adipokines and inflammatory markers and minor changes in the insulin-like growth factor axis. There are currently no data comparing IER or IF with CER in normal-weight subjects. The benefits of IER in these short-term trials are of interest, but not sufficient evidence to recommend the use of IER above CER. Longer-term human studies of adherence to and efficacy and safety of IER are required in obese and overweight subjects, as well as normal-weight subjects. PMID:27422504

  18. The Clean-Development Mechanism, stochastic permit prices and energy investments

    International Nuclear Information System (INIS)

    Hieronymi, Philipp; Schüller, David

    2015-01-01

    We analyze the impact on energy investments stemming from different emission permit classes, by considering permits that are allocated inside the European Emission Trading Scheme and secondary Certified Emission Reduction (sCER) permits originating from the Clean Development Mechanism. One price taking firm which is subject to emission regulation has the choice to invest in gas or wind power plant. The firm faces uncertainty regarding stochastically evolving permit prices, while it receives a premium on the electricity price for wind energy. As a first step, we determine the value of the option to invest into a gas power plant over time. Then, we calculate the investment probability of a gas power investment in a range of policy scenarios. We find that allowing the usage of sCER permits in the present policy framework has a positive impact on gas power investment. Decoupling the price processes has a similar effect. If the quota of sCER permits is doubled, the decrease in the investment probability for wind power is large. We carry out sensitivity tests for different parameter values, and find that investment behavior changes significantly with differing interest rates, the wind energy premium and volatility. - Highlights: • We model the impact of two CO 2 permit classes on energy investments. • We present a real-options framework accounting for uncertainty. • Clean Development Mechanism permits have a negative influence on investment into renewable energy. • Interest rate and volatility values have a strong impact on the results

  19. Potentials for development of spa tourism in region of Cer Mountain: Western Serbia

    Directory of Open Access Journals (Sweden)

    Grčić Mirko

    2006-01-01

    Full Text Available Because of their particularities, thermal and mineral springs at the foothill of Cer Mountain deserve special analysis. This is the reason we wrote this article, aiming to take reader's attention to the touristic potentials of the spa zone of Cer Mountain and possibilities for its perspective development. From the medical and excursion-recreational tourism point of view, there is a possibility for combining the spa tourism with the complementary values of Cer Mountain.

  20. CERES ERBE-like Instantaneous TOA Estimates (ES-8) in HDF (CER_ES8_Aqua-FM4_Edition1-CV)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ES-8 archival data product contains a 24-hour, single-satellite, instantaneous view of scanner fluxes at the top-of-atmosphere (TOA) reduced from spacecraft altitude unfiltered radiances using Earth Radiation Budget Experiment (ERBE) scanner Inversion algorithms and the ERBE shortwave (SW) and longwave (LW) Angular Distribution Models (ADMs). The ES-8 also includes the total (TOT), SW, LW, and window (WN) channel radiometric data; SW, LW, and WN unfiltered radiance values; and the ERBE scene identification for each measurement. These data are organized according to the CERES 3.3-second scan into 6.6-second records. As long as there is one valid scanner measurement within a record, the ES-8 record will be generated. The following CERES ES8 data sets are currently available: CER_ES8_TRMM-PFM_Edition1 CER_ES8_TRMM-PFM_Edition2 CER_ES8_TRMM-PFM_Transient-Ops2 CER_ES8_Terra-FM1_Edition1 CER_ES8_Terra-FM2_Edition1 CER_ES8_Terra-FM1_Edition2 CER_ES8_Terra-FM2_Edition2 CER_ES8_Aqua-FM3_Edition1 CER_ES8_Aqua-FM4_Edition1 CER_ES8_Aqua-FM3_Edition2 CER_ES8_Aqua-FM4_Edition2 CER_ES8_Aqua-FM3_Edition1-CV CER_ES8_Aqua-FM4_Edition1-CV CER_ES8_Terra-FM1_Edition1-CV CER_ES8_Terra-FM1_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1997-12-27; Stop_Date=2005-03-29] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 day; Temporal_Resolution_Range=Daily - < Weekly].

  1. CERES ERBE-like Instantaneous TOA Estimates (ES-8) in HDF (CER_ES8_Terra-FM1_Edition1-CV)

    Science.gov (United States)

    Wielicki, Bruce A. (Principal Investigator)

    The ES-8 archival data product contains a 24-hour, single-satellite, instantaneous view of scanner fluxes at the top-of-atmosphere (TOA) reduced from spacecraft altitude unfiltered radiances using Earth Radiation Budget Experiment (ERBE) scanner Inversion algorithms and the ERBE shortwave (SW) and longwave (LW) Angular Distribution Models (ADMs). The ES-8 also includes the total (TOT), SW, LW, and window (WN) channel radiometric data; SW, LW, and WN unfiltered radiance values; and the ERBE scene identification for each measurement. These data are organized according to the CERES 3.3-second scan into 6.6-second records. As long as there is one valid scanner measurement within a record, the ES-8 record will be generated. The following CERES ES8 data sets are currently available: CER_ES8_TRMM-PFM_Edition1 CER_ES8_TRMM-PFM_Edition2 CER_ES8_TRMM-PFM_Transient-Ops2 CER_ES8_Terra-FM1_Edition1 CER_ES8_Terra-FM2_Edition1 CER_ES8_Terra-FM1_Edition2 CER_ES8_Terra-FM2_Edition2 CER_ES8_Aqua-FM3_Edition1 CER_ES8_Aqua-FM4_Edition1 CER_ES8_Aqua-FM3_Edition2 CER_ES8_Aqua-FM4_Edition2 CER_ES8_Aqua-FM3_Edition1-CV CER_ES8_Aqua-FM4_Edition1-CV CER_ES8_Terra-FM1_Edition1-CV CER_ES8_Terra-FM1_Edition1-CV. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1997-12-27; Stop_Date=2006-09-30] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Temporal_Resolution=1 day; Temporal_Resolution_Range=Daily - < Weekly].

  2. Could Intermittent Energy Restriction and Intermittent Fasting Reduce Rates of Cancer in Obese, Overweight, and Normal-Weight Subjects? A Summary of Evidence.

    Science.gov (United States)

    Harvie, Michelle N; Howell, Tony

    2016-07-01

    Animal studies and human observational data link energy restriction (ER) to reduced rates of carcinogenesis. Most of these studies have involved continuous energy restriction (CER), but there is increasing public and scientific interest in the potential health and anticancer effects of intermittent energy restriction (IER) or intermittent fasting (IF), which comprise periods of marked ER or total fasting interspersed with periods of normal eating. This review summarizes animal studies that assessed tumor rates with IER and IF compared with CER or ad libitum feed consumption. The relevance of these animal data to human cancer is also considered by summarizing available human studies of the effects of IER or IF compared with CER on cancer biomarkers in obese, overweight, and normal-weight subjects. IER regimens that include periods of ER alternating with ad libitum feed consumption for 1, 2, or 3 wk have been reported to be superior to CER in reducing tumor rates in most spontaneous mice tumor models. Limited human data from short-term studies (≤6 mo) in overweight and obese subjects have shown that IER can lead to greater improvements in insulin sensitivity (homeostasis model assessment) than can CER, with comparable reductions in adipokines and inflammatory markers and minor changes in the insulin-like growth factor axis. There are currently no data comparing IER or IF with CER in normal-weight subjects. The benefits of IER in these short-term trials are of interest, but not sufficient evidence to recommend the use of IER above CER. Longer-term human studies of adherence to and efficacy and safety of IER are required in obese and overweight subjects, as well as normal-weight subjects. © 2016 American Society for Nutrition.

  3. Assessment of CO2 emission reduction and identification of CDM potential in a township

    Energy Technology Data Exchange (ETDEWEB)

    Misra, R.; Aseri, Tarun Kumar; Jamuwa, Doraj Karnal [Department of Mechanical Engineering, Government Engineering College, Ajmer, Rajasthan (India); Bansal, V. [Department of Mechanical Engineering, Government Mahila Engineering College, Ajmer, Rajasthan (India)

    2012-11-15

    This paper presents the theoretical investigation of CDM opportunity in a township at Jaipur, India. The purpose of study is to identify and analyze the various opportunities viz., installation of solar water heater, energy efficient lighting, energy efficient air conditioners, and energy efficient submersible water pumps in desert coolers and thus achieve a considerable (65.7 %) reduction in GHG emissions. Out of the various opportunities considered, the retrofitting with solar water heater can be recommended for CDM. Though, the retrofitting with energy efficient lighting, energy efficient air conditioners and energy efficient submersible water pumps in desert coolers claimed CO2 emission reduction of 104.84, 25.92, and 36.94 tons per annum, respectively, but the only opportunity which got through CDM was retrofitting with solar water heater claiming 115.70 tCO2 (100 %) emission reductions per annum which could result into net earnings of 115.70 CERs. The simple and discounted payback period for all four project activities are also calculated with and without CDM and tax benefits.

  4. El origen de la cerámica en el Este de Asia

    OpenAIRE

    Sola Fernández de Zuazo, Garazi

    2017-01-01

    Este trabajo trata sobre el origen de la cerámica. Las teorías tradicionales situaban esta innovación en el Próximo Oriente durante la “Revolución Neolítica” descrita por Gordon Childe. En cambio, los nuevos descubrimientos realizados en yacimientos del Este de Asia nos muestran que la cerámica apareció varios milenios antes en esta zona. La cerámica más antigua fue hallada en yacimientos en cuevas del sur de China y presenta una cronología varios milenios anterior a la aparición de asentamie...

  5. Síntesis y Caracterización de Microesferas Cerámicas

    NARCIS (Netherlands)

    Quercia Bianchi, G.

    2007-01-01

    El presente estudio se basó en la utilización de materiales de desecho tipo escoria, para la producción de microesferas cerámicas de bajo costo, con el objetivo principal de profundizar en las metodologías de producción de estas a escala nacional. Generalmente las microesferas cerámicas son

  6. The effects of intermittent compared to continuous energy restriction on glycaemic control in type 2 diabetes; a pragmatic pilot trial.

    Science.gov (United States)

    Carter, S; Clifton, P M; Keogh, J B

    2016-12-01

    Weight loss improves glycaemic control in type 2 diabetes mellitus (T2DM). However, as achieving and maintaining weight loss is difficult, alternative strategies are needed. Our primary aim was to investigate the effects of intermittent energy restriction (IER) compared to continuous energy restriction (CER) on glycated haemoglobin A1c (HbA1c). Secondary aims were to assess effects on weight loss, body composition, medication changes and subjective measures of appetite. Using a 2-day IER method, we expected equal improvements to HbA1c and weight in both groups. Sixty-three overweight or obese participants (BMI 35.2±5kg/m 2 ) with T2DM (HbA1c 7.4±1.3%) (57mmol/mol) were randomised to a 2-day severe energy restriction (1670-2500kJ/day) with 5days of habitual eating, compared to a moderate CER diet (5000-6500kJ/day) for 12weeks. At 12weeks HbA1c (-0.7±0.9% P<0.001) and percent body weight reduction (-5.9±4% P<0.001) was similar in both groups with no group by time interaction. Similar reductions were also seen for medication dosages, all measures of body composition and subjective reports of appetite. In this pilot trial, 2days of IER compared with CER resulted in similar improvements in glycaemic control and weight reduction offering a suitable alternative treatment strategy. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  7. Cerámicas Estampilladas de Salvatierra de Tormes (Salamanca. Contribución al Estudio de las Cerámicas Tardorromanas del Valle del Duero

    Directory of Open Access Journals (Sweden)

    Enrique CERRILLO MARTÍN DE CÁCERES

    2009-10-01

    Full Text Available Dentro del conjunto de yacimientos del Valle del Duero han sido exhaustivamente analizados diversos materiales en bloque (cuchillos, bronces, vidrios, adornos de uso personal, etc. que ponen de manifiesto una indudable unidad cultural de esta zona en un momento determinado, concretamente en los siglos iv y v d. de C. Sin embargo, y a pesar de que el Prof. Palol promete un estudio sobre las cerámicas tardorromanas de estos yacimientos, añadimos a las ya conocidas un lote bastante homogéneo de cerámicas de factura local, pero que a pesar de ello observan unos caracteres muy concretos e interesantes para el estudio de la cerámica del Duero en estos momentos que siempre han quedado vacíos al clasificar cronológicamente los hallazgos, bien de época romana, o bien de época visigoda.

  8. CER, PBE, SCIRehab, NIDRR, and other important abbreviations.

    Science.gov (United States)

    Dijkers, Marcel P; Whiteneck, Gale G; Gassaway, Julie

    2013-04-01

    Comparative effectiveness research (CER) has been receiving much attention (and government funding) in recent years, stemming from dissatisfaction with much medical and health care research, which does not produce actionable evidence that can be used by clinicians, patients, and policymakers. Rehabilitation research has been characterized by similar weaknesses and by often inadequate research designs. The SCIRehab study of the outcomes of inpatient spinal cord injury rehabilitation is one of a small number of rehabilitation practice-based evidence (PBE) studies in recent years that allows for the comparison of interventions by all disciplines for relevant real-life outcomes. This introduction to a series of articles resulting from the SCIRehab project discusses the need for and the nature of CER, and places the SCIRehab study and other PBE studies in the light of CER. After a description of the highlights of the analyses in this supplement, we provide a preliminary evaluation of SCIRehab, counting the articles and presentations from the study, the resources that went into this vast project, and the lessons learned that may benefit future rehabilitation PBE investigators. Copyright © 2013 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  9. Options for utilizing the CDM for global emission reductions

    Energy Technology Data Exchange (ETDEWEB)

    Butzengeiger-Geyer, Sonja; Castro, Paula; Harthan, Ralph O.; Hayashi, Daisuke; Healy, Sean; Maribu, Karl Magnus; Michaelowa, Axel; Okubo, Yuri; Schneider, Lambert; Storroe, Ingunn [Zuerich Univ. (Switzerland); Oeko-Institut e.V., Berlin (Germany); Perspectives GmbH, Hamburg (Germany); Point Carbon A/S, Oslo (Norway)

    2010-11-15

    The study describes and discusses in detail how four CDM reform alternatives, namely discounting of emission reductions, ambitious baselines, purchase and cancellation of CERs and reinvestment of CER levies, could be integrated in a Post-2012 climate regime. The study assesses these alternatives, according to their impacts on GHG emission reductions, contribution to sustainable development, cost-efficiency, technical feasibility, incentives and distributional effects as well as negotiability. The study shows that the introduction of discounting and ambitious baselines is technically feasible but politically a massive challenge. With the help of an economic model the study shows that the introduction of reform alternatives increases the amount of emission reductions but in comparison to the current CDM the impact is rather limited. But a CDM reform can in any case increase the credibility and improve the environmental integrity of the mechanism. (orig.)

  10. Evidence gaps in advanced cancer care: community-based clinicians' perspectives and priorities for CER.

    Science.gov (United States)

    Lowry, Sarah J; Loggers, Elizabeth T; Bowles, Erin J A; Wagner, Edward H

    2012-05-01

    Although much effort has focused on identifying national comparative effectiveness research (CER) priorities, little is known about the CER priorities of community-based practitioners treating patients with advanced cancer. CER priorities of managed care-based clinicians may be valuable as reflections of both payer and provider research interests. We conducted mixed methods interviews with 10 clinicians (5 oncologists and 5 pharmacists) at 5 health plans within the Health Maintenance Organization Cancer Research Network. We asked, "What evidence do you most wish you had when treating patients with advanced cancer" and questioned participants on their impressions and knowledge of CER and pragmatic clinical trials (PCTs). We conducted qualitative analyses to identify themes across interviews. Ninety percent of participants had heard of CER, 20% had heard of PCTs, and all rated CER/PCTs as highly relevant to patient and health plan decision making. Each participant offered between 3 and 10 research priorities. Half (49%) involved head-to-head treatment comparisons; another 20% involved comparing different schedules or dosing regimens of the same treatment. The majority included alternative outcomes to survival (eg, toxicity, quality of life, noninferiority). Participants cited several limitations to existing evidence, including lack of generalizability, funding biases, and rapid development of new treatments. Head-to-head treatment comparisons remain a major evidence need among community- based oncology clinicians, and CER/PCTs are highly valued methods to address the limitations of traditional randomized trials, answer questions of cost-effectiveness or noninferiority, and inform data-driven dialogue and decision making by all stakeholders.

  11. Intermittent v. continuous energy restriction: differential effects on postprandial glucose and lipid metabolism following matched weight loss in overweight/obese participants.

    Science.gov (United States)

    Antoni, Rona; Johnston, Kelly L; Collins, Adam L; Robertson, M Denise

    2018-03-01

    The intermittent energy restriction (IER) approach to weight loss involves short periods of substantial (>70 %) energy restriction (ER) interspersed with normal eating. Studies to date comparing IER to continuous energy restriction (CER) have predominantly measured fasting indices of cardiometabolic risk. This study aimed to compare the effects of IER and CER on postprandial glucose and lipid metabolism following matched weight loss. In all, twenty-seven (thirteen male) overweight/obese participants (46 (sem 3) years, 30·1 (sem 1·0) kg/m2) who were randomised to either an IER intervention (2638 kJ for 2 d/week with an overall ER of 22 (sem 0·3) %, n 15) or a CER intervention (2510 kJ below requirements with overall ER of 23 (sem 0·8) %) completed the study. Postprandial responses to a test meal (over 360 min) and changes in anthropometry (fat mass, fat-free mass, circumferences) were assessed at baseline and upon attainment of 5 % weight loss, following a 7-d period of weight stabilisation. The study found no statistically significant difference in the time to attain a 5 % weight loss between groups (median 59 d (interquartile range (IQR) 41-80) and 73 d (IQR 48-128), respectively, P=0·246), or in body composition (P≥0·437). For postprandial measures, neither diet significantly altered glycaemia (P=0·266), whereas insulinaemia was reduced comparatively (P=0·903). The reduction in C-peptide tended (P=0·057) to be greater following IER (309 128 (sem23 268) to 247781 (sem20 709) pmol×360 min/l) v. CER (297 204 (sem25 112) to 301 655 (sem32 714) pmol×360 min/l). The relative reduction in TAG responses was greater (P=0·045) following IER (106 (sem30) to 68 (sem 15) mmol×360 min/l) compared with CER (117 (sem 43) to 130 (sem 31) mmol×360 min/l). In conclusion, these preliminary findings highlight underlying differences between IER and CER, including a superiority of IER in reducing postprandial lipaemia, which now warrant targeted mechanistic evaluation

  12. Blindagens cerâmicas para aplicações balísticas: uma revisão

    OpenAIRE

    Silva,M. V. da; Stainer,D.; Al-Qureshi,H. A.; Hotza,D.

    2014-01-01

    A combinação de propriedades físicas e mecânicas qualificam as cerâmicas para aplicações em sistemas de proteção balística. Materiais cerâmicos normalmente formam a primeira camada de um sistema de blindagem mista, recebendo o impacto inicial do projétil, e dissipando grande parte da energia cinética ao fragmentar o projétil. Os principais materiais cerâmicos para blindagem balística são a alumina, o carbeto de silício e o carbeto de boro. Novas técnicas de processamento de materiais cerâmico...

  13. A comprehensive framework for data quality assessment in CER.

    Science.gov (United States)

    Holve, Erin; Kahn, Michael; Nahm, Meredith; Ryan, Patrick; Weiskopf, Nicole

    2013-01-01

    The panel addresses the urgent need to ensure that comparative effectiveness research (CER) findings derived from diverse and distributed data sources are based on credible, high-quality data; and that the methods used to assess and report data quality are consistent, comprehensive, and available to data consumers. The panel consists of representatives from four teams leveraging electronic clinical data for CER, patient centered outcomes research (PCOR), and quality improvement (QI) and seeks to change the current paradigm where data quality assessment (DQA) is performed "behind the scenes" using one-off project specific methods. The panelists will present their process of harmonizing existing models for describing and measuring clinical data quality and will describe a comprehensive integrated framework for assessing and reporting DQA findings. The collaborative project is supported by the Electronic Data Methods (EDM) Forum, a three-year grant from the Agency for Healthcare Research and Quality (AHRQ) to facilitate learning and foster collaboration across a set of CER, PCOR, and QI projects designed to build infrastructure and methods for collecting and analyzing prospective data from electronic clinical data .

  14. Multifractal features of EUA and CER futures markets by using multifractal detrended fluctuation analysis based on empirical model decomposition

    International Nuclear Information System (INIS)

    Cao, Guangxi; Xu, Wei

    2016-01-01

    Basing on daily price data of carbon emission rights in futures markets of Certified Emission Reduction (CER) and European Union Allowances (EUA), we analyze the multiscale characteristics of the markets by using empirical mode decomposition (EMD) and multifractal detrended fluctuation analysis (MFDFA) based on EMD. The complexity of the daily returns of CER and EUA futures markets changes with multiple time scales and multilayered features. The two markets also exhibit clear multifractal characteristics and long-range correlation. We employ shuffle and surrogate approaches to analyze the origins of multifractality. The long-range correlations and fat-tail distributions significantly contribute to multifractality. Furthermore, we analyze the influence of high returns on multifractality by using threshold method. The multifractality of the two futures markets is related to the presence of high values of returns in the price series.

  15. Desenvolvimento e caracterização de filtros cerâmicos para aplicações a altas temperaturas

    OpenAIRE

    Torquato, Wagner Lopes

    2012-01-01

    Filtros cerâmicos processados pelo método da réplica tem sido objeto de crescentes pesquisas pela versatilidade da técnica. O método consiste na impregnação de uma esponja polimérica em uma suspensão cerâmica, seguido de tratamento térmico, onde ocorre a decomposição do material orgânico e a sinterização do material cerâmico, resultando em um corpo cerâmico, cuja estrutura macroscópica é uma réplica da esponja impregnada. Filtros cerâmicos possuem propriedades especificas qu...

  16. Pesquisa e desenvolvimento em cerâmicas eletro-eletrônicas no IPEN

    Directory of Open Access Journals (Sweden)

    Muccillo R.

    1999-01-01

    Full Text Available O Grupo de Cerâmicas Eletro-eletrônicas do IPEN desenvolve trabalhos de pesquisa em materiais cerâmicos avançados para utilização em dispositivos sensores de espécies químicas e em células de combustíveis a eletrólitos sólidos. As principais áreas de atuação do grupo são em 1 síntese, processamento e caracterização elétrica de materiais cerâmicos, 2 estudo de correlação microestrutura-propriedades elétricas de materiais cerâmicos, 3 projeto, desenvolvimento, montagem e testes de sensores eletroquímicos de espécies químicas. Os principais materiais estudados são condutores iônicos (à base de ZrO2, ThO2 e outros, protônicos (à base de BaCeO3, varistores à base de SnO2, supercondutores cerâmicos de alta temperatura crítica (das famílias Y-Ba-Cu-O e Bi-Sr-Ca-Cu-O e compósitos de matriz cerâmica (dos tipos isolante em matriz condutora iônica e condutor iônico em matriz supercondutora. A infra-estrutura experimental dispõe de analisador de impedância, difratômetro de raios X, equipamento de análise térmica simultânea, fornos para sinterização e laboratório químico. O trabalho de pesquisa do Grupo é financiado por projetos FAPESP e PRONEX.

  17. The Cer-cqu gene cluster determines three key players in a β-diketone synthase polyketide pathway synthesizing aliphatics in epicuticular waxes

    DEFF Research Database (Denmark)

    Schneider, Lizette Marais; Adamski, Nikolai M.; Christensen, Caspar Elo

    2016-01-01

    identification of mutants in their synthesis or transport. The present study discloses three such Eceriferum (cer) genes in barley - Cer-c, Cer-q and Cer-u - known to be tightly linked and functioning in a biochemical pathway forming dominating amounts of β-diketone and hydroxy-β-diketones plus some esterified...... alkan-2-ols. These aliphatics are present in many Triticeae as well as dicotyledons such as Eucalyptus and Dianthus. Recently developed genomic resources and mapping populations in barley defined these genes to a small region on chromosome arm 2HS. Exploiting Cer-c and -u potential functions pinpointed...... five candidates, of which three were missing in apparent cer-cqu triple mutants. Sequencing more than 50 independent mutants for each gene confirmed their identification. Cer-c is a chalcone synthase-like polyketide synthase, designated diketone synthase (DKS), Cer-q is a lipase/carboxyl transferase...

  18. Cerámicas de circona para aplicaciones biomédicas

    OpenAIRE

    Delgado García-Menocal, José Angel; Morejón, L.; Martínez, S.; Gil, F. X. (Francesc Xavier)

    2003-01-01

    Se tratan los aspectos mas significativos de distintos biomateriales empleados para la sustitución del tejido óseo pero haciendo énfasis en las cerámicas de óxido de zirconio (circonas). Se destacan las características de las cerámicas de circona que lo convierten en un material muy atractivo por sus excelentes propiedades mecánicas, en particular su elevada tenacidad a la fractura relacionada con la transformación martensítica que se produce cuando el material es sometido a un...

  19. Evaluation of the tissue reaction to fast endodontic cement (CER) and Angelus MTA.

    Science.gov (United States)

    Gomes-Filho, João Eduardo; Rodrigues, Guilherme; Watanabe, Simone; Estrada Bernabé, Pedro Felício; Lodi, Carolina Simonett; Gomes, Alessandra Cristina; Faria, Max Doulgas; Domingos Dos Santos, Alailson; Silos Moraes, João Carlos

    2009-10-01

    A new cement (CER; Cimento Endodôntico Rápido or fast endodontic cement) has been developed to improve handling properties. It is a formulation that has Portland cement in gel. However, there had not yet been any study evaluating its biologic properties. The purpose of this study was to evaluate the rat subcutaneous tissue response to CER and Angelus MTA. The materials were placed in polyethylene tubes and implanted into dorsal connective tissue of Wistar rats for 7, 30, and 60 days. The specimens were prepared to be stained with hematoxylin-eosin or von Kossa or not stained for polarized light. The presence of inflammation, predominant cell type, calcification, and thickness of fibrous connective tissue were recorded. Scores were defined as follows: 0, none or few inflammatory cells, no reaction; 1, 125 cells, severe reaction. Fibrous capsule was categorized as thin when thickness was 150 mum. Necrosis and formation of calcification were both recorded. Both materials Angelus MTA and CER caused moderate reactions at 7 days, which decreased with time. The response was similar to the control at 30 and 60 days with Angelus MTA and CER, characterized by organized connective tissue and presence of some chronic inflammatory cells. Mineralization and granulations birefringent to polarized light were observed with both materials. It was possible to conclude that CER was biocompatible and stimulated mineralization.

  20. Enhancing cancer registry data for comparative effectiveness research (CER) project: overview and methodology.

    Science.gov (United States)

    Chen, Vivien W; Eheman, Christie R; Johnson, Christopher J; Hernandez, Monique N; Rousseau, David; Styles, Timothy S; West, Dee W; Hsieh, Meichin; Hakenewerth, Anne M; Celaya, Maria O; Rycroft, Randi K; Wike, Jennifer M; Pearson, Melissa; Brockhouse, Judy; Mulvihill, Linda G; Zhang, Kevin B

    2014-01-01

    Following the Institute of Medicine's 2009 report on the national priorities for comparative effectiveness research (CER), funding for support of CER became available in 2009 through the American Recovery and Re-investment Act. The Centers for Disease Control and Prevention (CDC) received funding to enhance the infrastructure of population-based cancer registries and to expand registry data collection to support CER. The CDC established 10 specialized registries within the National Program of Cancer Registries (NPCR) to enhance data collection for all cancers and to address targeted CER questions, including the clinical use and prognostic value of specific biomarkers. The project also included a special focus on detailed first course of treatment for cancers of the breast, colon, and rectum, as well as chronic myeloid leukemia (CML) diagnosed in 2011. This paper describes the methodology and the work conducted by the CDC and the NPCR specialized registries in collecting data for the 4 special focused cancers, including the selection of additional data variables, development of data collection tools and software modifications, institutional review board approvals, training, collection of detailed first course of treatment, and quality assurance. It also presents the characteristics of the study population and discusses the strengths and limitations of using population-based cancer registries to support CER as well as the potential future role of population-based cancer registries in assessing the quality of patient care and cancer control.

  1. EBM, HTA, and CER: clearing the confusion.

    Science.gov (United States)

    Luce, Bryan R; Drummond, Michael; Jönsson, Bengt; Neumann, Peter J; Schwartz, J Sanford; Siebert, Uwe; Sullivan, Sean D

    2010-06-01

    The terms evidence-based medicine (EBM), health technology assessment (HTA), comparative effectiveness research (CER), and other related terms lack clarity and so could lead to miscommunication, confusion, and poor decision making. The objective of this article is to clarify their definitions and the relationships among key terms and concepts. This article used the relevant methods and policy literature as well as the websites of organizations engaged in evidence-based activities to develop a framework to explain the relationships among the terms EBM, HTA, and CER. This article proposes an organizing framework and presents a graphic demonstrating the differences and relationships among these terms and concepts. More specific terminology and concepts are necessary for an informed and clear public policy debate. They are even more important to inform decision making at all levels and to engender more accountability by the organizations and individuals responsible for these decisions.

  2. Placa cerámica fotovoltaica para fachadas ventiladas

    Directory of Open Access Journals (Sweden)

    Pastrana, A.

    2012-04-01

    Full Text Available Gres de la Mancha, in response to the increasing demand for friendly with the environment products, and realizing towards the use of renewable energies and the energy efficiency in the construction, has developed his new ceramic ecological photovoltaic panel ECOCERAVOLT developed for its use in systems of Ventilated Façade. ECOCERAVOLT joins the benefits of the ventilated façade (energy saving, thermal - acoustic isolation, increase of the comfort in the buildings, reduction of the emission of CO2, etc. and the generation of electrical energy without compromising neither the aesthetics of the frontage, not of the building. This way, it puts itself in value on the direct and indirect exhibition to the sun of the frontages, which happen of being passive elements of closing and decoration, to be generators of a clean energy for proper or commercial use. ECOCERAVOLT, due to its design, does not need to be hidden, as it happens with other photovoltaic generators. These technical and innovative merits imply the entire optimization of the installed revetment in addition to creating a criterion of sustainability and energy efficiency.

    Gres de La Mancha, en respuesta a la demanda creciente por productos medioambientalmente amigables, y su concienciación hacia el uso de energías renovables y la eficiencia energética en la construcción, ha lanzado su nueva placa cerámica ecológica fotovoltaica ECOCERAVOLT concebida para su uso en sistemas de fachada ventilada. ECOCERAVOLT aúna los beneficios de la fachada ventilada (ahorro energético, asilamiento térmico-acústico, aumento del confort en los edificios, reducción de las emisiones de CO2, etc. y la generación de energía eléctrica sin comprometer la estética de la fachada, ni del edificio. De este modo, se pone en valor la exposición directa e indirecta al sol de las fachadas, que pasan de ser elementos pasivos de cerramiento y decoración, a ser generadores de una

  3. CER Hub: An informatics platform for conducting comparative effectiveness research using multi-institutional, heterogeneous, electronic clinical data.

    Science.gov (United States)

    Hazlehurst, Brian L; Kurtz, Stephen E; Masica, Andrew; Stevens, Victor J; McBurnie, Mary Ann; Puro, Jon E; Vijayadeva, Vinutha; Au, David H; Brannon, Elissa D; Sittig, Dean F

    2015-10-01

    Comparative effectiveness research (CER) requires the capture and analysis of data from disparate sources, often from a variety of institutions with diverse electronic health record (EHR) implementations. In this paper we describe the CER Hub, a web-based informatics platform for developing and conducting research studies that combine comprehensive electronic clinical data from multiple health care organizations. The CER Hub platform implements a data processing pipeline that employs informatics standards for data representation and web-based tools for developing study-specific data processing applications, providing standardized access to the patient-centric electronic health record (EHR) across organizations. The CER Hub is being used to conduct two CER studies utilizing data from six geographically distributed and demographically diverse health systems. These foundational studies address the effectiveness of medications for controlling asthma and the effectiveness of smoking cessation services delivered in primary care. The CER Hub includes four key capabilities: the ability to process and analyze both free-text and coded clinical data in the EHR; a data processing environment supported by distributed data and study governance processes; a clinical data-interchange format for facilitating standardized extraction of clinical data from EHRs; and a library of shareable clinical data processing applications. CER requires coordinated and scalable methods for extracting, aggregating, and analyzing complex, multi-institutional clinical data. By offering a range of informatics tools integrated into a framework for conducting studies using EHR data, the CER Hub provides a solution to the challenges of multi-institutional research using electronic medical record data. Copyright © 2015. Published by Elsevier Ireland Ltd.

  4. The Cer-cqu gene cluster determines three key players in a β-diketone synthase polyketide pathway synthesizing aliphatics in epicuticular waxes.

    Science.gov (United States)

    Schneider, Lizette M; Adamski, Nikolai M; Christensen, Caspar Elo; Stuart, David B; Vautrin, Sonia; Hansson, Mats; Uauy, Cristobal; von Wettstein-Knowles, Penny

    2016-03-09

    Aliphatic compounds on plant surfaces, called epicuticular waxes, are the first line of defense against pathogens and pests, contribute to reducing water loss and determine other important phenotypes. Aliphatics can form crystals affecting light refraction, resulting in a color change and allowing identification of mutants in their synthesis or transport. The present study discloses three such Eceriferum (cer) genes in barley - Cer-c, Cer-q and Cer-u - known to be tightly linked and functioning in a biochemical pathway forming dominating amounts of β-diketone and hydroxy-β-diketones plus some esterified alkan-2-ols. These aliphatics are present in many Triticeae as well as dicotyledons such as Eucalyptus and Dianthus. Recently developed genomic resources and mapping populations in barley defined these genes to a small region on chromosome arm 2HS. Exploiting Cer-c and -u potential functions pinpointed five candidates, of which three were missing in apparent cer-cqu triple mutants. Sequencing more than 50 independent mutants for each gene confirmed their identification. Cer-c is a chalcone synthase-like polyketide synthase, designated diketone synthase (DKS), Cer-q is a lipase/carboxyl transferase and Cer-u is a P450 enzyme. All were highly expressed in pertinent leaf sheath tissue of wild type. A physical map revealed the order Cer-c, Cer-u, Cer-q with the flanking genes 101kb apart, confirming they are a gene cluster, Cer-cqu. Homology-based modeling suggests that many of the mutant alleles affect overall protein structure or specific active site residues. The rich diversity of identified mutations will facilitate future studies of three key enzymes involved in synthesis of plant apoplast waxes. © The Author 2016. Published by Oxford University Press on behalf of the Society for Experimental Biology.

  5. Cerámica Kichwa : cuerpo, materialidad y representación.

    OpenAIRE

    Premauer Marroquin, Anna

    2016-01-01

    Esta tesis investiga, la práctica de elaboración cerámica desde el cuerpo cerámico, su condición material y significación social. Plantea la necesidad de estudiar las interacciones materiales, simbólicas y cotidianas como vínculos que moldean o tejen los cuerpos, el género, los actos políticos y la vida misma de las mujeres ceramistas kichwas de Pastaza. Dentro de estos aspectos se tiene en cuenta las prácticas sociales de las mujeres ceramistas exponiendo la importancia que para ellas tiene ...

  6. Using the CER Hub to ensure data quality in a multi-institution smoking cessation study.

    Science.gov (United States)

    Walker, Kari L; Kirillova, Olga; Gillespie, Suzanne E; Hsiao, David; Pishchalenko, Valentyna; Pai, Akshatha Kalsanka; Puro, Jon E; Plumley, Robert; Kudyakov, Rustam; Hu, Weiming; Allisany, Art; McBurnie, MaryAnn; Kurtz, Stephen E; Hazlehurst, Brian L

    2014-01-01

    Comparative effectiveness research (CER) studies involving multiple institutions with diverse electronic health records (EHRs) depend on high quality data. To ensure uniformity of data derived from different EHR systems and implementations, the CER Hub informatics platform developed a quality assurance (QA) process using tools and data formats available through the CER Hub. The QA process, implemented here in a study of smoking cessation services in primary care, used the 'emrAdapter' tool programmed with a set of quality checks to query large samples of primary care encounter records extracted in accord with the CER Hub common data framework. The tool, deployed to each study site, generated error reports indicating data problems to be fixed locally and aggregate data sharable with the central site for quality review. Across the CER Hub network of six health systems, data completeness and correctness issues were prevalent in the first iteration and were considerably improved after three iterations of the QA process. A common issue encountered was incomplete mapping of local EHR data values to those defined by the common data framework. A highly automated and distributed QA process helped to ensure the correctness and completeness of patient care data extracted from EHRs for a multi-institution CER study in smoking cessation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  7. Pilares cerâmicos na implantodontia: revisão de literatura

    Directory of Open Access Journals (Sweden)

    R. F. Sallenave

    Full Text Available Resumo Os pilares protéticos, usados como intermediários entre a prótese e o implante, são feitos de titânio e outros metais, que possuem estrutura confiável. A cor acinzentada desses metais, acrescidos a recessão gengival e a camadas finas de tecidos adjacentes, acaba exposta, o que compromete a estética. Com isso, foram introduzidos os pilares cerâmicos (zircônia, alumina ou zircônia/alumina que fornecem boas propriedades ópticas, assim como biocompatibilidade e estética duradoura. O objetivo desse estudo foi avaliar, através de uma revisão sistemática da literatura, as taxas de sobrevivência dos pilares metálicos e cerâmicos, bem como seus principais tipos de falha. Foi realizada uma pesquisa nas bases de dados Pubmed de 1999 a 2015 utilizando as palavras-chave: cerâmicas (ceramics, pilar (abutment, implantes dentários (dental implants e prótese parcial fixa (partial fixed denture. Foram selecionados 16 artigos de pesquisa clínica e estudos de coorte. Segundo os estudos, não houve diferença significativa nos índices biológicos e radiográficos entre os pilares cerâmicos e metálicos, quando comparados uns com os outros e com os dentes naturais, em estudos de até 11 anos. Também não foi observada perda significativa de osso marginal entre a avaliação inicial e a última avaliação para ambos tipos de pilares (titânio e cerâmicos. Pilares de alumina têm taxa de sobrevivência de 94,7% a 100% em estudo de acompanhamento clínico de até 7 anos. Pilares de zircônia têm taxa de sobrevivência semelhante aos pilares de titânio (100% em estudos de acompanhamento clínico de até 11 anos. Apenas em um estudo de 7 anos, a taxa de sobrevivência caiu para 97,6%, para os pilares de zircônia. Os modos de falha encontrados para os pilares foram fratura e afrouxamento do parafuso. A semelhança no comportamento mecânico e biológico entre os materiais torna os pilares cerâmicos uma boa alternativa na

  8. Regression of coronary atherosclerosis with infusions of the high-density lipoprotein mimetic CER-001 in patients with more extensive plaque burden.

    Science.gov (United States)

    Kataoka, Yu; Andrews, Jordan; Duong, MyNgan; Nguyen, Tracy; Schwarz, Nisha; Fendler, Jessica; Puri, Rishi; Butters, Julie; Keyserling, Constance; Paolini, John F; Dasseux, Jean-Louis; Nicholls, Stephen J

    2017-06-01

    CER-001 is an engineered pre-beta high-density lipoprotein (HDL) mimetic, which rapidly mobilizes cholesterol. Infusion of CER-001 3 mg/kg exhibited a potentially favorable effect on plaque burden in the CHI-SQUARE (Can HDL Infusions Significantly Quicken Atherosclerosis Regression) study. Since baseline atheroma burden has been shown as a determinant for the efficacy of HDL infusions, the degree of baseline atheroma burden might influence the effect of CER-001. CHI-SQUARE compared the effect of 6 weekly infusions of CER-001 (3, 6 and 12 mg/kg) vs. placebo on coronary atherosclerosis in 369 patients with acute coronary syndrome (ACS) using serial intravascular ultrasound (IVUS). Baseline percent atheroma volume (B-PAV) cutoff associated with atheroma regression following CER-001 infusions was determined by receiver-operating characteristics curve analysis. 369 subjects were stratified according to the cutoff. The effect of CER-001 at different doses was compared to placebo in each group. A B-PAV ≥30% was the optimal cutoff associated with PAV regression following CER-001 infusions. CER-001 induced PAV regression in patients with B-PAV ≥30% but not in those with B-PAV CER-001 3mg/kg in patients with B-PAV ≥30% (-0.96%±0.34% vs. -0.25%±0.31%, P=0.01), whereas there were no differences between placebo (+0.09%±0.36%) versus CER-001 in patients with B-PAV CER-001 3 mg/kg induced the greatest atheroma regression in ACS patients with higher B-PAV. These findings identify ACS patients with more extensive disease as most likely to benefit from HDL mimetic therapy.

  9. Energy Savings from Industrial Water Reductions

    Energy Technology Data Exchange (ETDEWEB)

    Rao, Prakash; McKane, Aimee; de Fontaine, Andre

    2015-08-03

    Although it is widely recognized that reducing freshwater consumption is of critical importance, generating interest in industrial water reduction programs can be hindered for a variety of reasons. These include the low cost of water, greater focus on water use in other sectors such as the agriculture and residential sectors, high levels of unbilled and/or unregulated self-supplied water use in industry, and lack of water metering and tracking capabilities at industrial facilities. However, there are many additional components to the resource savings associated with reducing site water use beyond the water savings alone, such as reductions in energy consumption, greenhouse gas emissions, treatment chemicals, and impact on the local watershed. Understanding and quantifying these additional resource savings can expand the community of businesses, NGOs, government agencies, and researchers with a vested interest in water reduction. This paper will develop a methodology for evaluating the embedded energy consumption associated with water use at an industrial facility. The methodology developed will use available data and references to evaluate the energy consumption associated with water supply and wastewater treatment outside of a facility’s fence line for various water sources. It will also include a framework for evaluating the energy consumption associated with water use within a facility’s fence line. The methodology will develop a more complete picture of the total resource savings associated with water reduction efforts and allow industrial water reduction programs to assess the energy and CO2 savings associated with their efforts.

  10. BP Canada Energy Company energy efficiency and GHG reduction opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Forsyth, B. [BP Canada Energy Company, Calgary, AB (Canada)

    2004-07-01

    This paper presented an outline of the BP Canada Energy Company's energy efficiency program, which uses an innovative approach that relies on front line operations staff to generate, evaluate and implement ideas for energy reduction projects. An outline of the organization team was presented, with details of the small central Calgary group responsible for coordination, technical support and tracking of data. Key objectives of the team were identified as: the promotion of energy efficiency; sharing of best practices; and coordination of efforts at operations at both the development and corporate level. An outline of BP upstream operations and emissions reduction strategies was provided along with a timeline of BP Canada greenhouse gas (GHG) emissions and sustainable reductions projects. A chart representing energy savings through conversion to natural gas was also presented, sorted by project type. Results included over 400 GHG or energy reduction projects completed, with an average pay out of 30 months as well as 300,000 tonnes equivalent of GHGs reduced at an estimated value of of $13,000,000. Areas of focus for future projects include: compression; fired equipment; flaring; venting; and fugitive emissions. Strategies to reduce emissions in all areas of future research were also provided. tabs, figs.

  11. The Crucial Role of C18-Cer in Fat-Induced Skeletal Muscle Insulin Resistance.

    Science.gov (United States)

    Blachnio-Zabielska, Agnieszka U; Chacinska, Marta; Vendelbo, Mikkel H; Zabielski, Piotr

    2016-01-01

    Muscle bioactive lipids accumulation leads to several disorder states. The most common are insulin resistance (IR) and type 2 diabetes. There is an ongoing debate which of the lipid species plays the major role in induction of muscle IR. Our aim was to elucidate the role of particular lipid group in induction of muscle IR. The analyses were performed on muscle from the following groups of rats: 1. Control, fed standard diet, 2 HFD, fed high fat diet, 3. HFD/Myr, fed HFD and treated with myriocin (Myr), an inhibitor of ceramide de novo synthesis. We utilized [U13C] palmitate isotope tracer infusion and mass spectrometry to measure content and synthesis rate of muscle long-chain acyl-CoA (LCACoA), diacylglycerols (DAG) and ceramide (Cer). HFD led to intramuscular accumulation of LCACoA, DAG and Cer and skeletal muscle IR. Myr-treatment caused decrease in Cer (most noticeable for stearoyl-Cer and oleoyl-Cer) and accumulation of DAG, possibly due to re-channeling of excess of intramuscular LCACoA towards DAG synthesis. An improvement in insulin sensitivity at both systemic and muscular level coincided with decrease in ceramide, despite elevated intramuscular DAG. The improved insulin sensitivity was associated with decreased muscle stearoyl- and oleoyl-ceramide content. The results indicate that accumulation of those ceramide species has the greatest impact on skeletal muscle insulin sensitivity in rats. © 2016 The Author(s) Published by S. Karger AG, Basel.

  12. Advanced CerMet ceramic composites for medical applications.

    Science.gov (United States)

    Dittmer, Robert; Schaefer, Christian M; Fischer, Jean-Francois; Hausch, Ulrich; Troetzschel, Jens; Specht, Heiko

    2017-11-01

    Implantable active devices such as pacemakers are facing rigorous requirements. Because they reside within the body for years, materials applied in this surrounding must exhibit biocompatibility and extraordinary reliability. They also have to provide a number of functional properties. In this work we present a method that enables the realization of a highly complex profile of properties by means of a dual composite approach. Using multilayer technology, an electrical conductor is embedded into a ceramic matrix, thus, creating conductive paths that are insulated from each other. In addition to this macroscopically hybrid architecture, this approach features a second composite aspect: the conductor is not composed of a single metallic phase, but is a ceramic-metal mixture. Owing to its interpenetrating microstructure, this CerMet allows for a strong and hermetic integration of the conductor into the ceramic matrix otherwise impossible due to mismatch in thermal expansion. In fact, the CerMet ceramic composite exhibits a higher strength than the pure ceramic as revealed by a three-point bending test study. At the same time, the CerMet offers high and virtually metal-like conductor properties, enabling a down-scaling of the conductive paths to 150µm diameter and smaller. Furthermore, the described composite is biocompatible, non-magnetic, and chemically inert, which is vital for the application in active, implantable, medical devices. Beside the general fabrication route, we present the microstructural, functional, and mechanical properties of this newly developed class of dual composites. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Legislación y gestión medioambiental en la producción de baldosas cerámicas

    Directory of Open Access Journals (Sweden)

    Gabaldón, S.

    2003-06-01

    Full Text Available Currently the socioeconomic environment has defined a new industrial framework in which environmental aspects have to be considered when developing new products and implementing production methods. In the last years the environmental legislation has developed to pollution prevention and reduction, making the adjustment of the companies to this new legislation applicable to industry, as much in Europe as in Spain, especially with regard to the politics of Integrated Pollution Prevention and Control and its repercussion in the ceramic industry. In the same way some of the main tendencies in environmental management in the ceramic sector are described, such as the European Ecolabel and the valuation of ceramic wastes in the ceramic sector. Finally, the results from the investigation on the environmental innovation applied to ceramic tiles manufacture are exposed. This innovation is based on the improvement of the efficiency with the recycling of ceramic wastes of diverse typology in ceramic compositions.

    Actualmente el entorno socioeconómico ha definido un nuevo marco de trabajo a nivel industrial en el que se han de tener en cuenta los aspectos medioambientales a la hora de desarrollar nuevos productos y poner a punto métodos de producción. Paralelamente, la normativa medioambiental ha evolucionado en los últimos años hacia la prevención y reducción de la contaminación, haciendo necesario la adecuación de las empresas a este nuevo enfoque hacia el desarrollo sostenible. En este trabajo se describe brevemente la situación actual de la normativa medioambiental a nivel industrial tanto en Europa como en España, especialmente en lo que respecta a las políticas de prevención y control de la contaminación y su repercusión en la industria cerámica. Asimismo se describen algunas de las principales tendencias en gestión medioambiental en el sector cerámico, como son el Ecoetiquetado Europeo y la valorización de los residuos cer

  14. Can CER be an effective tool for change in the development and assessment of new drugs and technologies?

    Science.gov (United States)

    Brixner, Diana I; Watkins, John B

    2012-06-01

    Comparative effectiveness research (CER) has been proposed in the United States as a way to compare new drugs and technologies with established alternatives and determine not just whether a therapy works, but how well it works compared to other options. To define the current use of CER in the development of new drugs and technologies and explore what is needed for this research approach to reduce or stabilize health care costs in the United States. In 2010, the Patient-Centered Outcomes Research Institute (PCORI) was established by the Patient Protection and Affordable Care Act (PPACA) to coordinate federally funded CER and recommend research priorities. Hochman and McCormick's (2010) evaluation of 328 randomized trials, observational studies, and meta-analyses involving medications published between June 2008 and September 2009 in 6 key journals showed that most published research did not fulfill the criteria of CER (defined as comparison to active treatment) and that most study design is driven by FDA requirements rather than the need to develop evidence to facilitates election of the most effective therapy. Since PPACA provides alternative funding for CER, it could encourage funding more studies to help determine which treatment delivers the best value per unit of investment from clinical, humanistic, and economic perspectives. Manufacturers may avoid CER because it increases product development costs, but a drug proven more effective is more likely to be accepted by formulary committees, increasing the drug's market share, whereas payers may reject or limit use of a new drug that performs less effectively in comparative studies. CER may not directly reduce expenditures for drugs and medical technologies. The results may vary widely from case to case; however, despite often significantly higher prices for new drugs, it is important to look beyond product costs to the overall impact on health care costs, including medical cost offsets that may occur through

  15. Factores que afectan la carga electrostática en polvos cerámicos

    Directory of Open Access Journals (Sweden)

    Fernández, J. F.

    2011-04-01

    Full Text Available The phenomenon of electrostatic charge in ceramic powders takes place when the particle surfaces enter in contact between them or with the containers. The accumulation of electrostatic charge is of relevance in ceramic powders in view of their insulating character and the risk of explosions during the material handling. In this work the main factors that affect the appearance of intrinsic charge and tribo-charge in ceramic powder have been studied. In ceramic powders of alumina it has been verified that the smallest particle sizes present an increase of the electrostatic charge of negative polarity. A correlation has been observed between the nature of the OH -surface groups and the electrostatic charge. The intrinsic charge and the tribocharge in ceramic powders can be diminished by compensating the surface groups that support the charge. The dry dispersion of nanoparticles on microparticles allows surface charge compensation with a noticeable modification of the powder agglomeration.

    Los fenómenos de carga electroestática en polvos cerámicos se producen cuando las superficies de los mismos entran en contacto entre sí y con los elementos que las contienen. La acumulación de cargas electrostática es importante en polvos cerámicos dado su carácter aislante y debido al riesgo de explosiones por descarga. En este trabajo se estudian los principales factores que afectan a la aparición de carga neta y la tribocarga en las partículas de polvo cerámico. En polvos cerámicos de alúmina se ha comprobado que las partículas más finas presentan un aumento de la carga electrostática con una polaridad negativa. Se ha observado una correlación entre la naturaleza de los grupos OH- superficiales y la carga electrostática. La carga neta y la tribocarga en polvos cerámicos se pueden reducir si se compensan los sitios superficiales que soportan dicha carga. La dispersión en seco de nanopartículas sobre micropartículas permite la

  16. Expansão por umidade de revestimentos cerâmicos incorporados com residuos de granito e caulim

    OpenAIRE

    Mendonça,A. M. G. D.; Cartaxo,J. M.; Menezes,R. R.; Santana,L. N. L; Neves,G. A.; Ferreira,H. C.

    2012-01-01

    Expansão por umidade (EPU) é o aumento das dimensões dos materiais cerâmicos em virtude da adsorção de água. A EPU geralmente ocorre lentamente e é relativamente pequena, mas, mesmo assim, pode comprometer a aderência das placas cerâmicas ao contrapiso, levar ao gretamento do vidrado e conduzir ao aparecimento de trincas em tijolos. Neste trabalho empregaram-se massas incorporadas com resíduos de caulim e de granito objetivando estudar a EPU de revestimentos cerâmicos. As matérias-primas fora...

  17. Opacificación y endurecimiento de vidriados cerámicos mediante scheelita

    Directory of Open Access Journals (Sweden)

    Vicent, J. B.

    2001-04-01

    Full Text Available The effect of addition of scheelite, obtained by both ceramic and coprecipation route, on the opacity and strength of ceramic glazes are discussed and compared with the scheelite obtained by in situ devitrification from a4dition of WO3. Mohs hardness, Vickers microhardness, gloss and whitness measurements of resulting glazes are associated with the obtained microstrucure of glass-ceramic composite.

    En esta comunicación se presentan los resultados obtenidos en la utilización de scheelita obtenida por diferentes procedimientos (ruta cerámica y precipitación química en la opacificación y endurecimiento de vidriados cerámicos comparándose los resultados con los obtenidos por coprecipitación in situ de Scheelita por adición de WO3 al molino. Los estudios de dureza al rayado, microdureza Vickers así como de índice de blancura y brillo de los materiales obtenidos se asocian al tipo de microestructura obtenido en material compuesto vidrio-cerámica.

  18. The mountain Cer: Potentials for tourism development

    Directory of Open Access Journals (Sweden)

    Grčić Mirko D.

    2003-01-01

    Full Text Available In northwest of Serbia in the meridians directions an elongated mountain range of Cer with Iverak and Vlašić stretches itself. On the north it goes down to Mačva and Posavina, on the west to Podrinje, on the east to the valley of Kolubara, on the south to the basins and valleys of Jadar and upper Kolubara, which separate it from the mountains of Valjevo and Podrinje area. Cer mountain offers extremely good condition for development of eco-tourism. The variety of relief with gorgeous see-sites, natural rarities, convenient bio-climatic conditions, significant water resources, forest complexes, medieval fortresses, cultural-historic monuments, richness of flora and fauna, preserved rural environment, traditions and customs of local population, were all neglected as strategic factors in the development of tourism. This mountain’s potentials are quite satisfactory for the needs of eco-tourism, similar to the National Park of Fruška Gora, but it has lacked an adequate ecotourist strategy so far. This study aims to pointing to the potential and possibilities of ecotourist valorization of this mountain.

  19. Registros cerámicos de época Taifa en madina labla (Niebla, Huelva) : un acercamiento tipológico

    OpenAIRE

    Beltrán Pinzón, José Manuel

    2010-01-01

    El presente estudio constituye un intento de clasificación de la cerámica del periodo taifa del asentamiento de Niebla (Huelva), según los registros obtenidos en la excavación realizada en el sector de murallas de El Desembarcadero, actividad enmarcada dentro del Proyecto de Arqueología Urbana de la Ciudad de Niebla (PAUCN). El conjunto cerámico estudiado revela unas conexiones bastante estrechas con otros registros cerámicos del Suroeste Peninsular.__________________________The present study...

  20. Evaluation of Pharmacy and Therapeutic (P&T) Committee member knowledge, attitudes and ability regarding the use of comparative effectiveness research (CER) in health care decision-making.

    Science.gov (United States)

    Tang, D H; Warholak, T L; Hines, L E; Hurwitz, J; Brown, M; Taylor, A M; Brixner, D; Malone, D C

    2014-01-01

    Comparative effectiveness research (CER) is a constellation of research methods designed to improve health care decision making. Educational programs that improve health care decision makers' CER knowledge and awareness may ultimately lead to more cost-effective use of health care resources. This study was conducted to evaluate changes in CER knowledge, attitudes, and ability among Pharmacy and Therapeutics (P&T) Committee members and support staff after attending a tailored educational program. Physicians and pharmacists from two professional societies and the Indian Health Service who participated in the P&T process were invited via email to participate in this study. Participants completed a questionnaire, designed specifically for this study, prior to and following the 4-hour live, educational program on CER to determine the impact on their related knowledge, attitudes, and ability to use CER in decision-making. Rasch analysis was used to assess validity and reliability of subsections of the questionnaire and regression analysis was used to assess programmatic impact on CER knowledge, attitude, and ability. One hundred and forty of the 199 participants completed both the pre- and post-CER session questionnaires (response rate = 70.4%). Most participants (>75%) correctly answered eight of the ten knowledge items after attending the educational session. More than 60% of the respondents had a positive attitude toward CER both before and after the program. Compared to baseline (pretest), participants reported significant improvements in their perceived ability to use CER after attending the session in these areas: using CER reviews, knowledge of CER methods, identifying problems with randomized controlled trials, identifying threats to validity, understanding of evidence synthesis approaches, and evaluating the quality of CER (all P values CER educational program was effective in increasing participants' CER knowledge and self-perceived ability to evaluate

  1. Determinación de la presencia de fatiga mecánica en materiales cerámicos

    Directory of Open Access Journals (Sweden)

    Casellas, D.

    1999-04-01

    Full Text Available It is well known that ceramic materials are highly susceptible to environmental assisted subcritical crack growth. In addition, this subcritical crack growth could be also related to cyclic loading (mechanical fatigue. This type of behaviour is not observed either in glasses nor in traditional ceramics. However this phenomena is clearly active in many advanced ceramics. The aim of this work is to obtain a procedure for detecting the presence of cyclic fatigue in ceramic materials. This procedure attempts to obtain cyclic fatigue life estimations and to compare it with the static loading experimental results. Through this comparisons it is possible to asses whether the cyclic fatigue is acting or not. Finally some calculations are conducted in ceramic materials (alumina, mullite and ZTA with natural and indentation flaws.

    Los materiales cerámicos son susceptibles al crecimiento de fisuras por la acción combinada del medio ambiente y la aplicación de carga (fatiga estática. Por otra parte, el crecimiento subcrítico de fisuras en cerámicas también puede ser producido por la aplicación de cargas fluctuantes (fatiga mecánica. Este fenómeno no se observa en vidrios ni en cerámicas monocristalinas, pero si en muchos de los llamados materiales cerámicos avanzados. En este trabajo se describe una metodología utilizada para detectar la presencia de fatiga mecánica en materiales cerámicos, basada en la obtención de estimaciones de la vida a fatiga del material bajo cargas fluctuantes y su comparación con los resultados experimentales bajo carga constante. Este método se ha aplicado a fisuras naturales y de indentación en algunos materiales cerámicos (mullita, alúmina y ZTA.

  2. Characterization of Cer-1 cis-regulatory region during early Xenopus development.

    Science.gov (United States)

    Silva, Ana Cristina; Filipe, Mário; Steinbeisser, Herbert; Belo, José António

    2011-05-01

    Cerberus-related molecules are well-known Wnt, Nodal, and BMP inhibitors that have been implicated in different processes including anterior–posterior patterning and left–right asymmetry. In both mouse and frog, two Cerberus-related genes have been isolated, mCer-1 and mCer-2, and Xcer and Xcoco, respectively. Until now, little is known about the mechanisms involved in their transcriptional regulation. Here, we report a heterologous analysis of the mouse Cerberus-1 gene upstream regulatory regions, responsible for its expression in the visceral endodermal cells. Our analysis showed that the consensus sequences for a TATA, CAAT, or GC boxes were absent but a TGTGG sequence was present at position -172 to -168 bp, relative to the ATG. Using a series of deletion constructs and transient expression in Xenopus embryos, we found that a fragment of 1.4 kb of Cer-1 promoter sequence could reproduce the endogenous expression pattern of Xenopus cerberus. A 0.7-kb mcer-1 upstream region was able to drive reporter expression to the involuting mesendodermal cells, while further deletions abolished reporter gene expression. Our results suggest that although no sequence similarity was found between mouse and Xenopus cerberus cis-regulatory regions, the signaling cascades regulating cerberus expression, during gastrulation, is conserved.

  3. STED Imaging of Golgi Dynamics with Cer-SiR: A Two-Component, Photostable, High-Density Lipid Probe for Live Cells.

    Science.gov (United States)

    Erdmann, Roman S; Toomre, Derek; Schepartz, Alanna

    2017-01-01

    Long time-lapse super-resolution imaging in live cells requires a labeling strategy that combines a bright, photostable fluorophore with a high-density localization probe. Lipids are ideal high-density localization probes, as they are >100 times more abundant than most membrane-bound proteins and simultaneously demark the boundaries of cellular organelles. Here, we describe Cer-SiR, a two-component, high-density lipid probe that is exceptionally photostable. Cer-SiR is generated in cells via a bioorthogonal reaction of two components: a ceramide lipid tagged with trans-cyclooctene (Cer-TCO) and a reactive, photostable Si-rhodamine dye (SiR-Tz). These components assemble within the Golgi apparatus of live cells to form Cer-SiR. Cer-SiR is benign to cellular function, localizes within the Golgi at a high density, and is sufficiently photostable to enable visualization of Golgi structure and dynamics by 3D confocal or long time-lapse STED microscopy.

  4. Procedimiento de obtención de un material cerámico de forsterita

    OpenAIRE

    Sánchez-Soto, Pedro José; Ruíz-Conde, Antonio; Bono Barrón, Rafael; Raigón Pichardo, M.; Garzón Garzón, Eduardo

    2009-01-01

    Procedimiento de obtención de un material cerámico de forsterita. Procedimiento de obtención de un material cerámico a partir de un silicato laminar hidroxilado, preferiblemente talco, que comprende: mezclar una suspensión acuosa de silicato laminar hidroxilado con óxido de magnesio; secar la suspensión obtenida anteriormente a una temperatura de hasta 350ºC; y tratar térmicamente el producto secado a una temperatura de hasta 1600ºC. Además, la invención se refiere ...

  5. Industria cerámica madrileña: Real Fábrica de la Moncloa

    OpenAIRE

    Puche Riart, Octavio; Mazadiego Martínez, Luis Felipe

    2000-01-01

    En un trabajo anterior se estudiaron los hornos cerámicos de Colmenar de Oreja (Puche y Mazadiego, 1999). Igualmente, está en curso una investigación sobre la industria cerámica de Valdemorillo y sobre las ladrilleras, tejeras y alfares de la Comunidad de Madrid, dentro el proyecto de investigación "Arqueología Industrial: Conservación del Patrimonio Minero-Metalúrgico Madrileño", subvencionado por la Consejería de Cultura de la Comunidad de Madrid. La existencia de la chimenea (La Tinaja), a...

  6. Avaliação da tenacidade à fratura de diferentes sistemas cerâmicos Relative fracture toughness of differents dental ceramics

    Directory of Open Access Journals (Sweden)

    Clovis Pagani

    2003-03-01

    Full Text Available Embora as cerâmicas possuam alta resistência à compressão, apresentam friabilidade devido à sua baixa resistência à tração e, desta forma, possuem menor capacidade de absorver impactos. Este trabalho avaliou a tenacidade à fratura de diferentes sistemas cerâmicos, que refere-se à medida da habilidade de absorção da energia de deformação de um material friável. Foram confeccionados 30 corpos-de-prova em forma de discos (5mmx3mm utilizando-se três diferentes materiais cerâmicos, os quais foram divididos em 3 grupos: G1-10 amostras confeccionadas com a cerâmica Vitadur Alpha (Vita-Zahnfabrik; G2-10 amostras confeccionadas com a cerâmica IPS Empress 2 (Ivoclar-Vivadent e G3-10 amostras confeccionadas com a cerâmica In-Ceram Alumina (Vita-Zahnfabrik. Para a obtenção dos valores de tenacidade foi utilizada a técnica da indentação que se baseia na série de fissuras que se formam sob uma carga pesada. Foram realizadas 4 impressões por amostra, utilizado um microdurômetro (Digital Microhardness Tester FM com uma carga de 500gf, durante 10 segundos. A análise estatística dos dados (Testes ANOVA de Kruskal-Wallis e Dunn, indica que a cerâmica In-Ceram Alumina apresentou valor mediano (2,96N/m3/2, estatisticamente diferente do apresentado pela IPS Empress 2 (1,05N/m3/2, enquanto que a cerâmica Vitadur Alpha apresentou valores intermediários (2,08N/m3/2, sem diferenças estatísticas dos outros dois materiais. Conclui-se que as cerâmicas apresentam diferentes desempenhos de tenacidade à fratura, sendo a In-Ceram capaz de absorver maior energia comparada a Vitadur Alpha e ao IPS Empress2.Although ceramics present high compressive strength, they are brittle materials due to their low tensile strength so they have lower capacity to absorb shocks. This study evaluated the fracture toughness of different ceramic systems, which refers to the ability of a friable material to absorb defformation energy. Three ceramic systems were

  7. Quemadores de gas cerámicos

    Directory of Open Access Journals (Sweden)

    García, E.

    2003-10-01

    Full Text Available The extended use of natural gas for domestic applications is spurring the continuous improvement in the gas boiler technology. Thus, compact boilers that are able to work in a wider power range, in order to satisfy the exact energy requirements of the users, are a common goal. This requires the development of gas burners capable of working in radiant mode for increasing the combustion efficiency besides reducing the emissions of hazardous gases. The ceramic materials are strong candidates for this application. They have the properties required for working in the severe conditions associated with the combustion of gases, i.e. high temperatures and the presence of corrosive chemical species. These work conditions produce a slow but continuous degradation of their properties and the ultimate burner failure. This paper discusses the different types of ceramic gas burners available, their working requirements, modes of operation and the possible degradation mechanisms.

    El creciente uso del gas natural, como fuente de energía térmica en aplicaciones domésticas, está produciendo una continua evolución en la tecnología de este tipo de calderas. Estas son cada vez más compactas y capaces de trabajar en un mayor rango de potencias caloríficas, para satisfacer las demandas de energía requeridas, en cada momento, por los usuarios. Para ello, deben estar provistas con quemadores que puedan funcionar intermitentemente en modo radiante, lo que permite un aumento en la eficiencia del proceso de combustión y, además, una reducción en la emisión de gases nocivos. Los materiales cerámicos son unos buenos candidatos para fabricar estas placas radiantes de los nuevos quemadores de gas. En general, estos materiales poseen las propiedades adecuadas para funcionar en las severas condiciones que se producen en la combustión, caracterizadas por las altas temperaturas y la presencia de especies químicas corrosivas. Estas condiciones de trabajo

  8. Ionoluminiscencia de silicatos de utilización en cerámica a temperaturas criogenicas

    Directory of Open Access Journals (Sweden)

    García-Guinea, J.

    2004-10-01

    Full Text Available Requirements on accurate physical properties need new characterization techniques for structural defects. The use of light ions such as H+ and He+ with MeV energies allows penetration to a depth of several microns in most materials producing strong luminescence to gain information on the defect structures present. Examples of ionoluminescence spectra of silicates for ceramic uses are included such as Mn2+-Fe3+ coupled pairs in quartz, Dy3+ in zircon, hatch-twinning in microcline and spontaneous strain and sodium in albite. In cryogenic thermal conditions tectosilicates display both, reorganization of Mn2+ and Fe3+ centres plus a large enlargement of the UV-blue emissions by stress mechanisms. Nesosilicates, i.e., zircon, shows differences such as existence of REE and (Dy3+ and a selective reduction of some UV-blue peaks, e.g., at 340 and 400 nm.

    El requerimiento de propiedades físicas muy controladas en los nuevos materiales cerámicos precisa de nuevas técnicas de caracterización de defectos estructurales. Al incidir sobre un material un flujo de iones ligeros, como 1 1H+, 2 1H+, 3 2He+ y 4 2He+, acelerados a energías de MeV, estos iones pueden penetrar varias micras en muchos materiales emitiendo un fuerte espectro luminiscente con mucha información sobre defectos estructurales. Se presentan algunos ejemplos de espectros de ionoluminiscencia de silicatos de uso cerámico con diferentes tipos de defectos como Mn2+, Fe3+, Ti4+ en cuarzo, Dy3+ en circón, maclados tartán en microclina y estrés espontáneo y potasio en albita. En tectosilicatos a temperaturas criogénicas se aprecia una reorganización del par Mn2+ y Fe3+ mas un crecimiento de las emisiones espectrales ultravioleta-azules atribuibles a mecanismos de estrés en redes silicatadas. En nesosilicatos (circón se observan diferencias como presencia de tierras raras (Dy3+ y reducción selectiva de algunos picos ultravioleta-azules (340 y 400 nm.

  9. CO2 reduction through energy conservation

    International Nuclear Information System (INIS)

    1991-05-01

    A study was carried out of the potential to economically reduce carbon dioxide emissions through energy conservation in the petroleum and natural gas industry. The study examined current and projected emissions levels, cogeneration at gas plants, flaring, economics, regulation, reporting requirements, implementation, and research and development. Economically attractive energy conservation measures can reduce oil and gas industry, exclusive of Athabasca oil sands operations, CO 2 emissions by 6-7%. The energy conservation options identified range from field energy awareness committees through to equipment retrofits and replacement. At ca 3 million tonnes/y, these reductions will not offset the increases in oil and gas related CO 2 emissions anticipated by producers and Alberta government agencies. There will be increasing emphasis on in-situ bitumen production, more energy intensive light crude oil production and increasing natural gas sales, increasing energy inputs in excess of reductions. Cogeneration of electricity for utility company distribution and for internally required steam at gas plants and in-situ production sites is not economic due to low electricity prices. 8 tabs

  10. Síntesis de pigmentos cerámicos mediante radiación microondas

    Directory of Open Access Journals (Sweden)

    Calbo, J.

    2007-02-01

    Full Text Available Effect of microwave radiation on the development of ceramic pigments for tiles has been studied. Four compositions corresponding to different ceramic pigments (chrome-tin pink, cobalt-ferrite black, pink coral of iron in zircon and pink of chromium-tin sphene have been prepared. Compositions using several synthesis methods (ceramic route and nonconventional methods have been prepared and fired by microwave irradiation in a multimode, 1250 W power and 2450 MHz frequency, microwave equipment, and by conventional electric kiln. Results show that the efficiency of microwave firing show a great dependence on the mixing degree of precursors attained on the synthesis methods carried out, on microstructural parameters of powders and on the considered pigmenting system.

    En el presente trabajo se ha analizado el efecto de la calcinación rápida dieléctrica con horno microondas sobre el desarrollo de pigmentos cerámicos para coloración de baldosas cerámicas. Para ello se han preparado cuatro composiciones de diferentes pigmentos cerámicos (negro de ferrocromita de cobalto, rosa de manganeso-alúmina, coral de hierro en circón y rosa de cromo estaño, empleando diferentes métodos de síntesis (ruta cerámica y métodos no convencionales, y han sido calcinadas en horno multimodo microondas, de 1250 W de potencia y 2450 MHz de frecuencia, y en horno eléctrico tradicional. Los resultados obtenidos indican que la efectividad de la cocción con microondas depende del grado de homogeneidad alcanzado en los diferentes métodos de síntesis, de la microestructura de los polvos y del sistema pigmentante considerado.

  11. Analysis on energy saving and emission reduction of clean energy technology in ports

    Science.gov (United States)

    Zhu, Li; Qin, Cuihong; Peng, Chuansheng

    2018-02-01

    This paper discusses the application of clean energy technology in ports. Using Ningbo port Co. Ltd. Beilun second container terminal branch as an example, we analyze the effect of energy saving and emission reduction of CO2 and SO2 by clean energy alternative to fuel oil, and conclude that the application of clean energy technology in the container terminal is mature, and can achieve effect of energy-saving and emission reduction of CO2 and SO2. This paper can provide as a reference for the promotion and application of clean energy in ports.

  12. Peak reduction for commercial buildings using energy storage

    Science.gov (United States)

    Chua, K. H.; Lim, Y. S.; Morris, S.

    2017-11-01

    Battery-based energy storage has emerged as a cost-effective solution for peak reduction due to the decrement of battery’s price. In this study, a battery-based energy storage system is developed and implemented to achieve an optimal peak reduction for commercial customers with the limited energy capacity of the energy storage. The energy storage system is formed by three bi-directional power converter rated at 5 kVA and a battery bank with capacity of 64 kWh. Three control algorithms, namely fixed-threshold, adaptive-threshold, and fuzzy-based control algorithms have been developed and implemented into the energy storage system in a campus building. The control algorithms are evaluated and compared under different load conditions. The overall experimental results show that the fuzzy-based controller is the most effective algorithm among the three controllers in peak reduction. The fuzzy-based control algorithm is capable of incorporating a priori qualitative knowledge and expertise about the load characteristic of the buildings as well as the useable energy without over-discharging the batteries.

  13. Materiais cerâmicos para células a combustível Ceramic materials for fuel cells

    Directory of Open Access Journals (Sweden)

    D. Z. de Florio

    2004-12-01

    Full Text Available A partir da definição de células a combustível, é feita uma introdução sucinta dos tipos de células e dos materiais cerâmicos que são empregados em projeto e fabricação destes dispositivos geradores de energia elétrica. Tomando por base a ampla literatura científica disponível em publicações periódicas internacionais indexadas e arbitradas, bem como patentes, são relatados com detalhes os materiais cerâmicos com comportamento elétrico adequado para uso como eletrólitos, anodos, catodos, interconectores e selantes, que são os componentes básicos de células a combustível de óxidos sólidos. Por fim, é feita uma avaliação do estado da arte na pesquisa e desenvolvimento de materiais cerâmicos para uso em células a combustível de óxidos sólidos.Basic definitions of fuel cells and a brief introduction of different types of fuel cells are given. A review of the most important ceramic materials being considered for the design and fabrication of devices for producing electrical energy is presented. Ceramic materials with suitable electrical behavior to be used as electrolytes, anodes, cathodes, interconnectors, and sealants of solid oxide fuel cells are reported with details, taking into account the large number of available indexed and refereed scientific publications and patents. Finally, an evaluation of the state of the art of the research and development of ceramic materials for solid oxide fuel cells is presented.

  14. The red deer Cervus elaphus genome CerEla1.0: sequencing, annotating, genes, and chromosomes.

    Science.gov (United States)

    Bana, Nóra Á; Nyiri, Anna; Nagy, János; Frank, Krisztián; Nagy, Tibor; Stéger, Viktor; Schiller, Mátyás; Lakatos, Péter; Sugár, László; Horn, Péter; Barta, Endre; Orosz, László

    2018-01-02

    We present here the de novo genome assembly CerEla1.0 for the red deer, Cervus elaphus, an emblematic member of the natural megafauna of the Northern Hemisphere. Humans spread the species in the South. Today, the red deer is also a farm-bred animal and is becoming a model animal in biomedical and population studies. Stag DNA was sequenced at 74× coverage by Illumina technology. The ALLPATHS-LG assembly of the reads resulted in 34.7 × 10 3 scaffolds, 26.1 × 10 3 of which were utilized in Cer.Ela1.0. The assembly spans 3.4 Gbp. For building the red deer pseudochromosomes, a pre-established genetic map was used for main anchor points. A nearly complete co-linearity was found between the mapmarker sequences of the deer genetic map and the order and orientation of the orthologous sequences in the syntenic bovine regions. Syntenies were also conserved at the in-scaffold level. The cM distances corresponded to 1.34 Mbp uniformly along the deer genome. Chromosomal rearrangements between deer and cattle were demonstrated. 2.8 × 10 6 SNPs, 365 × 10 3 indels and 19368 protein-coding genes were identified in CerEla1.0, along with positions for centromerons. CerEla1.0 demonstrates the utilization of dual references, i.e., when a target genome (here C. elaphus) already has a pre-established genetic map, and is combined with the well-established whole genome sequence of a closely related species (here Bos taurus). Genome-wide association studies (GWAS) that CerEla1.0 (NCBI, MKHE00000000) could serve for are discussed.

  15. Plasma C16-Cer levels are increased in patients with preterm labor.

    Science.gov (United States)

    Laudanski, Piotr; Charkiewicz, Karol; Kisielewski, Rafal; Kuc, Pawel; Koc-Zorawska, Ewa; Raba, Grzegorz; Kraczkowski, Janusz; Dymicka-Piekarska, Violetta; Chabowski, Adrian; Kacerovsky, Marian; Jacobsson, Bo; Zabielski, Piotr; Blachnio-Zabielska, Agnieszka

    2016-03-01

    The pathogenesis of preterm labor is fragmentarily explained. The most widely accepted theory points out to infection and inflammation as possible causes, which can be mediated by potentially different factors, including sphingolipid mediators. Sphingolipids are a class of lipids that have been shown as important mediators in various cell processes such as: proliferation, growth, apoptosis, stress response, necrosis and inflammation. The aim of the study was to assess plasma concentrations of selected sphingolipids in patients with preterm labor. We used ultra-high performance liquid chromatography with triple mass spectrometry (UHPLC-ESI-MS/MS) to assess plasma concentrations of the 11 sphingolipids in patients presenting with symptoms of preterm labor (n=61) and threatened preterm labor (n=40). We observed a statistically significant increase (p-valueCer in patients with preterm labor as compared to the control group. We also found C16-Cer to be the best predictor of preterm labor in the group of patients with symptoms occurring after 32 weeks of gestation. Our findings show a possible involvement of selected sphingolipids, especially C16-Cer, in the pathogenesis of preterm labor. Their role as predictors of preterm delivery needs to be validated in the future on larger group of patients. Copyright © 2016 Elsevier Inc. All rights reserved.

  16. Annual Energy Usage Reduction and Cost Savings of a School: End-Use Energy Analysis

    Science.gov (United States)

    Alghoul, M. A.; Bakhtyar, B.; Asim, Nilofar; Sopian, K.

    2014-01-01

    Buildings are among the largest consumers of energy. Part of the energy is wasted due to the habits of users and equipment conditions. A solution to this problem is efficient energy usage. To this end, an energy audit can be conducted to assess the energy efficiency. This study aims to analyze the energy usage of a primary school and identify the potential energy reductions and cost savings. A preliminary audit was conducted, and several energy conservation measures were proposed. The energy conservation measures, with reference to the MS1525:2007 standard, were modelled to identify the potential energy reduction and cost savings. It was found that the school's usage of electricity exceeded its need, incurring an excess expenditure of RM 2947.42. From the lighting system alone, it was found that there is a potential energy reduction of 5489.06 kWh, which gives a cost saving of RM 2282.52 via the improvement of lighting system design and its operating hours. Overall, it was found that there is a potential energy reduction and cost saving of 20.7% when the energy conservation measures are earnestly implemented. The previous energy intensity of the school was found to be 50.6 kWh/m2/year, but can theoretically be reduced to 40.19 kWh/mm2/year. PMID:25485294

  17. Materias primas no tradicionales en la industria cerámica

    Directory of Open Access Journals (Sweden)

    Caligaris, R.

    2000-10-01

    Full Text Available The wastes incorporation to the production cycle is an interesting alternative in modern industry. This gives rise to not only an economical profit but to a considerable decrease in environmental impact. Studies made about recycling of several wastes: glass, electric insulators and fly ash are compared in this work. The materials were crushed and separated by particle size distribution in order to prepare representative samples. Different treatment steps were carried out as is usual in the process of ceramic industries. Some of the obtained powders were used without additives while other were mixed in different ratios with other ceramic components in order to improve their final properties. All the compacts, obtained by uniaxial pressing of the powders, received thermal treatments which were adequate to their compositions. They were then characterised by several techniques including dilatometry, X ray diffraction, porosity, microhardness, optical and scanning electron microscopy and energy dispersion analysis (SEM/EDX. From this investigation it was concluded that the studied materials constitute a potential source of raw materials for the ceramic industry.

    La incorporación de materiales de desecho en el ciclo productivo es una alternativa de interés en la industria moderna que conduce tanto a un beneficio económico como a una considerable reducción del impacto sobre el medio ambiente. En este trabajo se comparan estudios realizados sobre la reutilización de diversos residuos: vidrio, aisladores eléctricos y cenizas volantes. Estos materiales fueron molidos y clasificados por tamaño de partículas para ser usados en la preparación de muestras representativas. Las diferentes etapas de tratamiento se establecieron según los procesos habituales de producción de la industria cerámica. Algunos de los polvos obtenidos se utilizaron sin aditivos, mientras que otros fueron mezclados en distintas proporciones con diversos componentes

  18. Economic Impact of CDM Implementation through Alternate Energy Resource Substitution

    Directory of Open Access Journals (Sweden)

    K.J. Sreekanth

    2013-02-01

    Full Text Available Since the Kyoto protocol agreement, Clean Development Mechanism (CDM hasgarnered large emphasis in terms of certified emission reductions (CER not only amidst the globalcarbon market but also in India. This paper attempts to assess the impact of CDM towardssustainable development particularly in rural domestic utility sector that mainly includes lightingand cooking applications, with electricity as the source of energy. A detailed survey has undertakenin the state of Kerala, in southern part of India to study the rural domestic energy consumptionpattern. The data collected was analyzed that throws insight into the interrelationships of thevarious parameters that influence domestic utility sector pertaining to energy consumption byusing electricity as the source of energy. The interrelationships between the different parameterswere modeled that optimizes the contribution of electricity on domestic utility sector. The resultswere used to estimate the feasible extent of CO2 emission reduction through use of electricity as theenergy resources, vis-à-vis its economic viability through cost effectiveness. The analysis alsoprovides a platform for implementing CDM projects in the sector and related prospects withrespects to the Indian scenario.

  19. Materiais cerâmicos de inserção aplicados a baterias de íons lítio Intercalation ceramic materials applied in lithium ions batteries

    Directory of Open Access Journals (Sweden)

    N. C. Pesquero

    2008-06-01

    Full Text Available Esta revisão visa ser uma introdução à aplicação de materiais cerâmicos em dispositivos de armazenamento de energia, em especial baterias secundárias de íons lítio, dispositivos nos quais os materiais cerâmicos, especialmente óxidos, são muito importantes em todas as partes do dispositivo. A revisão está focada nos materiais cerâmicos para catodos e anodos, partes chaves destes dispositivos. Ela tem por principal finalidade ser uma fonte de informação para aqueles que desejem trabalhar com o desenvolvimento de materiais cerâmicos para tais tipos de dispositivos. Aspectos relacionados à nanotecnologia e materiais óxidos nanoestruturados para esta área são discutidos ao final do artigo.This paper aims to be an introductory text on the applications of ceramic materials to energy storage devices, mainly lithium ion secondary batteries, i.e. devices in which the ceramic materials, e.g. oxides, are very important in all parts of the device. This review is focused in ceramic materials for cathodes and anodes, which are key parts of the battery device. The main purpose is, therefore, to offer to the reader, who is interested in the development of ceramic materials for storage devices, enough information concerning the main oxide materials used nowadays and promising technology regarding nanoestructured oxides and electrode geometry based on the nanoscale.

  20. Evaluación de moldes cerámicos en procesos de fundición

    Directory of Open Access Journals (Sweden)

    Héctor Mosquera Mosquera

    1983-05-01

    Full Text Available La búsqueda de nuevas líneas de investigación en el campo de los materiales y procesos, (para desarrollar en el futuro nos llevo a realizar un sondeo de evaluación de los materiales cerámicos en la fabricación de moldes para los procesos de fundición, con el objeto de economizar costos de operación en la elaboración de los elementos de maquinas y piezas matrices de formas complejas (intrincadas principalmente. La tundición en cerámica es un proceso de fundición de precisión que emplea para la fabricación de los moldes, materiales cerámicos de grano muy fino aglutinados con sustancias especiales tales como el silicato de etilo. El uso de este aglutinante permite la posibilidad de controlar el tiempo de endurecimiento del mol de; obteniéndose piezas con gran acabado superficial, finos detalles y alto grade de precisión dimensional.

  1. HDL and CER-001 Inverse-Dose Dependent Inhibition of Atherosclerotic Plaque Formation in apoE-/- Mice: Evidence of ABCA1 Down-Regulation.

    Science.gov (United States)

    Tardy, Claudine; Goffinet, Marine; Boubekeur, Nadia; Cholez, Guy; Ackermann, Rose; Sy, Gavin; Keyserling, Constance; Lalwani, Narendra; Paolini, John F; Dasseux, Jean-Louis; Barbaras, Ronald; Baron, Rudi

    2015-01-01

    CER-001 is a novel engineered HDL-mimetic comprised of recombinant human apoA-I and charged phospholipids that was designed to mimic the beneficial properties of nascent pre-ß HDL. In this study, we have evaluated the dose-dependent regulation of ABCA1 expression in vitro and in vivo in the presence of CER-001 and native HDL (HDL3). CER-001 induced cholesterol efflux from J774 macrophages in a dose-dependent manner similar to natural HDL. A strong down-regulation of the ATP-binding cassette A1 (ABCA1) transporter mRNA (- 50%) as well as the ABCA1 membrane protein expression (- 50%) was observed at higher doses of CER-001 and HDL3 compared to non-lipidated apoA-I. In vivo, in an apoE-/- mouse "flow cessation model," in which the left carotid artery was ligatured to induce local inflammation, the inhibition of atherosclerotic plaque burden progression in response to a dose-range of every-other-day CER-001 or HDL in the presence of a high-fat diet for two weeks was assessed. We observed a U-shaped dose-response curve: inhibition of the plaque total cholesterol content increased with increasing doses of CER-001 or HDL3 up to a maximum inhibition (- 51%) at 5 mg/kg; however, as the dose was increased above this threshold, a progressively less pronounced inhibition of progression was observed, reaching a complete absence of inhibition of progression at doses of 20 mg/kg and over. ABCA1 protein expression in the same atherosclerotic plaque was decreased by-45% and-68% at 50 mg/kg for CER-001 and HDL respectively. Conversely, a-12% and 0% decrease in ABCA1 protein expression was observed at the 5 mg/kg dose for CER-001 and HDL respectively. These data demonstrate that high doses of HDL and CER-001 are less effective at slowing progression of atherosclerotic plaque in apoE-/- mice compared to lower doses, following a U-shaped dose-response curve. A potential mechanism for this phenomenon is supported by the observation that high doses of HDL and CER-001 induce a rapid and

  2. Incidencia de chirridos con el uso de cerámica en cerámica Biolox Delta en artroplastía de cadera. [Incidence of squeaking using third-generation biolox® delta ceramic on ceramic bearing surfaces.

    Directory of Open Access Journals (Sweden)

    Gerardo Zanotti

    2014-06-01

    Full Text Available In­tro­duc­ción: La superficie cerámica-cerámica causa complicaciones, como la fractura y la generación de ruidos articulares (squeaking. Este estudio muestra nuestra experiencia con la utilización del compuesto de matriz alúmina (cerámica Delta. Materiales­ y ­Métodos: Se evaluaron, en forma retrospectiva, 109 caderas, 97 pacientes, con edad promedio de 49 años (rango 17-77. Ciento dos de estas caderas fueron cirugías primarias, mientras que 7 fueron revisiones. Todos los componentes acetabulares fueron Pinnacle® (DePuy Orthopaedics, Warsaw, Indiana, EE.UU. La cerámica utilizada en todos los casos fue BIOLOX® Delta (Ceram Tec AG, Plochingen, Alemania. Resultados: El seguimiento fue de 37 meses (rango 24- 50. Se realizó la medición radiográfica de la anteversión, por el método de Ackland (rango 1°-35°, la inclinación (rango 22°-67°, el diámetro acetabular (rango 48-62 mm, el tamaño de la cabeza femoral (88: 36 mm y 21: 28 mm y la lateralización antes de la cirugía y después de ella. Se evaluó a todos los pacientes con el puntaje de Harris, los resultados fueron, en su mayoría, muy buenos y algunos, buenos. Las complicaciones fueron: una luxación (0,91%, una subluxación protésica (0,91%, una infección aguda (0,91%, una fractura periprotésica (0,91%, una rotura del inserto de cerámica (0,91%. Ningún paciente refirió ruidos o una cadera chirriante. Conclusión: En esta serie, no se reportaron episodios de chirridos, pese a la gran variación en la anteversión y la inclinación del componente acetabular. Creemos que la composición y el diseño de la cerámica de tercera genera- ción determinarían un menor índice de chirridos que las de segunda generación.

  3. Effect of vorapaxar on myocardial infarction in the thrombin receptor antagonist for clinical event reduction in acute coronary syndrome (TRA·CER) trial.

    Science.gov (United States)

    Leonardi, Sergio; Tricoci, Pierluigi; White, Harvey D; Armstrong, Paul W; Huang, Zhen; Wallentin, Lars; Aylward, Philip E; Moliterno, David J; Van de Werf, Frans; Chen, Edmond; Providencia, Luis; Nordrehaug, Jan E; Held, Claes; Strony, John; Rorick, Tyrus L; Harrington, Robert A; Mahaffey, Kenneth W

    2013-06-01

    The TRA·CER trial compared vorapaxar, a novel platelet protease-activated receptor (PAR)-1 antagonist, with placebo in 12 944 patients with high-risk non-ST-segment elevation acute coronary syndromes (NSTE ACS). In this analysis, we explored the effect of vorapaxar on myocardial infarction (MI). A blinded, independent central endpoint adjudication committee prospectively defined and classified MI according to the universal MI definition, including peak cardiac marker value (creatine kinase-MB [CK-MB] and/or troponin). Because the trial failed to meet its primary endpoint, these analyses are considered exploratory. During a median follow-up of 502 days, 1580 MIs occurred in 1319 patients. The majority (n = 1025, 64.9%) were type 1 (spontaneous) MI, followed by type 4a [percutaneous coronary intervention (PCI)-related] MI (n = 352; 22.3%). Compared with placebo, vorapaxar reduced the hazard of a first MI of any type by 12% [hazard ratio (HR), 0.88; 95% confidence interval (CI), 0.79-0.98; P = 0.021] and the hazard of total number of MIs (first and subsequent) by 14% (HR, 0.86; 95% CI, 0.77-0.97; P = 0.014), an effect that was sustained over time. Vorapaxar reduced type 1 MI by 17% (HR, 0.83; 95% CI, 0.73-0.95; P = 0.007). Type 4a MIs were not significantly reduced by vorapaxar (HR, 0.90; 95% CI, 0.73-1.12; P = 0.35). Vorapaxar effect was consistent across MI sizes defined by peak cardiac marker elevations and across key clinical subgroups; however, in patients not treated with thienopyridine at baseline (HR, 0.65; 95% CI, 0.46-0.92) compared with patients who received thienopyridine (HR, 0.91; 95% CI, 0.81-1.02), there was a trend towards a higher effect (Pint = 0.077). The PAR-1 antagonist vorapaxar was associated with a reduction of MI, including total number of infarctions. This reduction was sustained over time and was mostly evident in type 1 MI, the most common type of MI observed.

  4. VOC reduction technology deveolpment as part of the U.S. Department of Energy, Industrial Waste Reduction Program

    International Nuclear Information System (INIS)

    Cranford, B.

    1993-01-01

    A strong industry is vital to U.S. Economic health and prosperity, but U.S. industry is facing serious challenges both domestically and internationally. One of these challenges is the reduction of volatile organic compounds emissions from industrial processes and products. To assist industry with these challenges, the U.S. Department of Energy established the Industrial Waste Reduction Program to improve energy efficiency and competitiveness to private industry through cost-effective waste material reduction. This paper describes the programs and the use of joint partnerships between the Department of Energy, industry, national laboratories, universities and others, in developing technologies which reduce VOC emissions while improving energy efficiency. This paper also describes the process and selection criteria for participation in the program, and briefly describes the following five VOC reduction technologies under development: Dual Cure Coatings, Solvent Reduction through use of a No-clean Soldering Process, Solvent Waste Minimization by Supercritical CO 2 Cleaning Process, ethanol Recovery Process, and Membrane Vapor Recovery Systems. The VOC reductions as well as the energy savings and other benefits to the U.S. are discussed

  5. Conformado de piezas cerámicas a partir de suspensiones parafínicas cargadas con polvos

    Directory of Open Access Journals (Sweden)

    Coronel, J. J.

    2004-10-01

    Full Text Available In this work is demonstrated the possible application of paraffin wax suspensions for shaping complex ceramic parts by injection moulding or extrusion. These suspensions were prepared from ceramic or metal-ceramic powders. Thermal debinding as well as mechanical properties after sintering (bending strength σB and fracture toughness KIc were also evaluated.

    En este trabajo se demuestra la posible aplicación de suspensiones parafínicas para la formación mediante inyección o extrusión de piezas cerámicas con forma compleja. Las suspensiones fueron preparadas a partir de polvos cerámicos y metal-cerámicos. La eliminación de los componentes orgánicos así como las propiedades mecánicas después del sinterizado (resistencia a la ruptura σB y tenacidad a la fractura KIc también fueron evaluadas.

  6. Símbolos geométricos en la cerámica de Izapa, Chiapas

    Directory of Open Access Journals (Sweden)

    Alla Kolpakova

    2009-07-01

    Full Text Available El artículo aborda el conjunto de símbolos geométricos (puntos, líneas, triángulos, círculos, etcétera elaborados sobre la cerámica proveniente del sitio arqueológico de Izapa, Chiapas. Dichos símbolos tienen una importancia especial para el entendimiento de la historia de los orígenes de la civilización en el sureste de Mesoamérica. El propósito final es dilucidar, con auxilio de diversas fuentes comparativas, los posibles significados “básicos” que los antiguos alfareros de Izapa otorgaban a los símbolos que imprimían en su cerámica.

  7. An Analysis of Decision Factors on the Price of South Korea’s Certified Emission Reductions in Use of Vector Error Correction Model

    Directory of Open Access Journals (Sweden)

    Sumin Park

    2017-09-01

    Full Text Available This study analyzes factors affecting the price of South Korea’s Certified Emission Reduction (CER using statistical methods. CER refers to the transaction price for the amount of carbon emitted. Analysis of results found a co-integration relationship among the price of South Korea’s CER, oil price (WTI, and South Korea’s maximum electric power demand, which means that there is a long-term relationship among the three variables. Based on this result, VECM (vector error correction model analysis, impulse response function, and variance decomposition were performed. As the oil price (WTI increases, the demand for gas in power generation in Korea declines while the demand for coal increases. This leads to increased greenhouse gas (GHG; e.g., CO2 emissions and increased price of South Korea’s CERs. In addition, rising oil prices (WTI cause a decline in demand for oil products such as kerosene, which results in an increase in South Korea’s maximum power demand.

  8. Escherichia coli ArgR mutants defective in cer/Xer recombination, but not in DNA binding.

    Science.gov (United States)

    Sénéchal, Hélène; Delesques, Jérémy; Szatmari, George

    2010-04-01

    The Escherichia coli arginine repressor (ArgR) is an L-arginine-dependent DNA-binding protein that controls the expression of the arginine biosynthetic genes and is required as an accessory factor for Xer site-specific recombination at cer and related recombination sites in plasmids. We used the technique of pentapeptide scanning mutagenesis to isolate a series of ArgR mutants that were considerably reduced in cer recombination, but were still able to repress an argA::lacZ fusion. DNA sequence analysis showed that all of the mutants mapped to the same nucleotide, resulting in a five amino acid insertion between residues 149 and 150 of ArgR, corresponding to the end of the alpha6 helix. A truncated ArgR containing a stop codon at residue 150 displayed the same phenotype as the protein with the five amino acid insertion, and both mutants displayed sequence-specific DNA-binding activity that was L-arginine dependent. These results show that the C-terminus of ArgR is more important in cer/Xer site-specific recombination than in DNA binding.

  9. Technology Roadmap. Energy Loss Reduction and Recovery in Industrial Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2004-11-01

    To help guide R&D decision-making and gain industry insights on the top opportunities for improved energy systems, ITP sponsored the Energy Loss Reduction and Recoveryin Energy Systems Roadmapping Workshopin April 2004 in Baltimore, Maryland. This Technology Roadmapis based largely on the results of the workshop and additional industrial energy studies supported by ITP and EERE. It summarizes industry feedback on the top opportunities for R&D investments in energy systems, and the potential for national impacts on energy use and the environment.

  10. Acción fundente de cenizas de glicerina de biodiésel en pastas cerámicas

    Directory of Open Access Journals (Sweden)

    Acosta, A.

    2009-06-01

    Full Text Available Biodiesel glycerin ashes are residual ashes generated in the combustion of glycerine that is produced as a by-product in the manufacture of biodiesel. The aim of this work is to check their flux action in ceramic fabrics. In order to do so, both mineralogical and chemical characterisation of these ashes and some ceramic pastes, used in stoneware, has been performed, as well as an assessment of its thermal behaviour. Different mixtures of biodiesel ceramics adding ashes to a paste in a ceramic 5, 7 and 10% by weight have been used. Such mixtures have been studied with a hot stage microscope and it can be concluded that the ash acts as a flux of the ceramic paste reducing its sintering temperature in more than 100 ºC, which in an industrial process would result in energy savings in the firing process and valorisation of waste it as a secondary raw material, in addition to obtaining an environmental benefit reusing waste products and preventing its dumping.

    Las cenizas de glicerina de biodiésel son unas cenizas residuales generadas en la combustión de la glicerina que se obtiene como subproducto en la fabricación de biodiésel. El objetivo de este trabajo es comprobar su acción fundente en pastas cerámicas. Para ello se ha realizado la caracterización mineralógica y química de dichas cenizas y de unas pastas cerámicas destinadas a la fabricación de gres, así como el estudio de su comportamiento térmico. Se han formulado diferentes mezclas adicionando cenizas de glicerina a la pasta cerámica en un 5, 7 y 10 % en peso. Estas mezclas se han estudiado con el microscopio de calefacción de manera comparada y se concluye que la ceniza actúa como fundente de la pasta cerámica reduciendo su temperatura de sinterización en más de 100ºC, lo cual en un proceso industrial se traduciría en un ahorro energético en la cocción y en la valorización de un residuo al considerarlo como una materia prima secundaria, además de obtener un

  11. The effect of an apolipoprotein A-I-containing high-density lipoprotein-mimetic particle (CER-001) on carotid artery wall thickness in patients with homozygous familial hypercholesterolemia: The Modifying Orphan Disease Evaluation (MODE) study.

    Science.gov (United States)

    Hovingh, G Kees; Smits, Loek P; Stefanutti, Claudia; Soran, Handrean; Kwok, See; de Graaf, Jacqueline; Gaudet, Daniel; Keyserling, Constance H; Klepp, Heather; Frick, Jennifer; Paolini, John F; Dasseux, Jean-Louis; Kastelein, John J P; Stroes, Erik S

    2015-05-01

    Patients with homozygous familial hypercholesterolemia (HoFH) are at extremely elevated risk for early cardiovascular disease because of exposure to elevated low-density lipoprotein cholesterol (LDL-C) plasma levels from birth. Lowering LDL-C by statin therapy is the cornerstone for cardiovascular disease prevention, but the residual risk in HoFH remains high, emphasizing the need for additional therapies. In the present study, we evaluated the effect of serial infusions with CER-001, a recombinant human apolipoprotein A-I (apoA-I)-containing high-density lipoprotein-mimetic particle, on carotid artery wall dimensions in patients with HoFH. Twenty-three patients (mean age 39.4 ± 13.5 years, mean LDL-C 214.2 ± 81.5 mg/dL) with genetically confirmed homozygosity or compound heterozygosity for LDLR, APOB, PCSK9, or LDLRAP1 mutations received 12 biweekly infusions with CER-001 (8 mg/kg). Before and 1 hour after the first infusion, lipid values were measured. Magnetic resonance imaging (3-T magnetic resonance imaging) scans of the carotid arteries were acquired at baseline and after 24 weeks to assess changes in artery wall dimensions. After CER-001 infusion, apoA-I increased from 114.8 ± 20.7 mg/dL to 129.3 ± 23.0 mg/dL. After 24 weeks, mean vessel wall area (primary end point) decreased from 17.23 to 16.75 mm(2) (P = .008). A trend toward reduction of mean vessel wall thickness was observed (0.75 mm at baseline and 0.74 mm at follow-up, P = .0835). In HoFH, 12 biweekly infusions with an apoA-I-containing high-density lipoprotein-mimetic particle resulted in a significant reduction in carotid mean vessel wall area, implying that CER-001 may reverse atherogenic changes in the arterial wall on top of maximal low-density lipoprotein-lowering therapy. This finding supports further clinical evaluation of apoA-I-containing particles in patients with HoFH. Copyright © 2015 Mosby, Inc. All rights reserved.

  12. Conformação de monolitos cerâmicos de cordierita via eletroforese

    Directory of Open Access Journals (Sweden)

    Picinini C. A.

    1999-01-01

    Full Text Available A técnica de conformação eletroforética é apresentada como uma alternativa viável para a produção de monolitos cerâmicos de cordierita. A matriz utilizada para a conformação das estruturas cerâmicas contém 109 condutos em paralelo. Os monolitos produzidos foram ensaiados quanto à área superficial, porosidade e resistência mecânica. Demonstra-se que a produção de monolitos por esta via é possível não só quanto sua facilidade de construção como também pela suas características adequadas para a utilização em substratos catalíticos.

  13. Counter of Energy Conservation and Emission Reduction for the Public in China

    Energy Technology Data Exchange (ETDEWEB)

    Wujun Wen; Xiaowen Liu; Geng Xu (Research Center for Sustainable Development of Shandong Province, Shandong Normal Univ., Jinan Shandong 250014 (China)). e-mail: wenwj@sdnu.edu.cn

    2009-05-15

    The Ministry of Science and Technology of China organized experts to develop the Internet-based software Counter of Energy Conservation and Emission Reduction to directly measure energy conservation and emission reduction potentials in people's daily lives. Research and testing of the software have been completed, and the software is available to the public on the Internet. The Counter of Energy Conservation and Emission Reduction software is being promoted with the aim of stimulating the public's enthusiasm for energy conservation and emission reduction. The software is of great significance in energy conservation and emission reduction education oriented to elementary and middle school students and community residents, thus changing the lagged public participation of Chinese citizens in energy conservation and emission reduction. The counter can calculate people's energy conservation and emission reduction potential in six aspects of daily life. The user can know his or her value of energy conservation and emission reduction in each aspect by clicking the options in keeping with his or her true daily routines. The user can also know the amounts of energy conservation and emission reduction as well as the potential energy conservation and emission reduction of the whole nation by clicking the Effect Calculation Button. Family life areas mainly include the methods and habits of water use, the use of energy conservation cookers, methods of saving paper, the use of environmental protection products, the habit of home appliance use, and the methods of washing clothing, especially the use of the washing machine with the function of energy conservation. Housing includes the building materials, the heating and cooling systems, the temperature control measures, and the lighting, etc. Heating and cooling times for the house by air conditioner should be reduced. Architects can do a great deal by using energy-efficient building materials and designing houses

  14. El laboratorio en la investigación cerámica

    Directory of Open Access Journals (Sweden)

    Arredondo, Francisco

    1958-02-01

    Full Text Available Not availableSe estudian las variaciones dimensionales que experimenta una arcilla durante su cocción, así como los métodos actuales para determinarlas. Se describe el dilatómetro, usado en el laboratorio de cerámica del l. T. C. C. para realizar el análisis dilatométrico.

  15. Mutational screening of FGFR1, CER1, and CDON in a large cohort of trigonocephalic patients.

    Science.gov (United States)

    Jehee, Fernanda Sarquis; Alonso, Luis G; Cavalcanti, Denise P; Kim, Chong; Wall, Steven A; Mulliken, John B; Sun, Miao; Jabs, Ethylin Wang; Boyadjiev, Simeon A; Wilkie, Andrew O M; Passos-Bueno, Maria Rita

    2006-03-01

    Screen the known craniosynostotic related gene, FGFR1 (exon 7), and two new identified potential candidates, CER1 and CDON, in patients with syndromic and nonsyndromic metopic craniosynostosis to determine if they might be causative genes. Using single-strand conformational polymorphisms (SSCPs), denaturing high-performance liquid chromatography, and/or direct sequencing, we analyzed a total of 81 patients for FGFR1 (exon 7), 70 for CER1, and 44 for CDON. Patients were ascertained in the Centro de Estudos do Genoma Humano in São Paulo, Brazil (n = 39), the Craniofacial Unit, Oxford, U.K. (n = 23), and the Johns Hopkins University, Baltimore, Maryland (n = 31). Clinical inclusion criteria included a triangular head and/or forehead, with or without a metopic ridge, and a radiographic documentation of metopic synostosis. Both syndromic and nonsyndromic patients were studied. No sequence alterations were found for FGFR1 (exon 7). Different patterns of SSCP migration for CER1 compatible with the segregation of single nucleotide polymorphisms reported in the region were identified. Seventeen sequence alterations were detected in the coding region of CDON, seven of which are new, but segregation analysis in parents and homology studies did not indicate a pathological role. FGFR1 (exon 7), CER1, and CDON are not related to trigonocephaly in our sample and should not be considered as causative genes for metopic synostosis. Screening of FGFR1 (exon 7) for diagnostic purposes should not be performed in trigonocephalic patients.

  16. Cerâmicas odontológicas: o estado atual Ceramic in dentistry: current situation

    Directory of Open Access Journals (Sweden)

    E. A. Gomes

    2008-09-01

    Full Text Available As cerâmicas dentais são conhecidas pela sua excelência em reproduzir artificialmente os dentes naturais. No século XVIII foi empregada pela primeira vez na Odontologia como dente artificial para próteses totais. A partir do século XX passou a ser utilizada para a confecção de restaurações metalocerâmicas e mais recentemente, com o aprimoramento da tecnologia cerâmica, surgiram as restaurações livres de metal. As cerâmicas têm apresentado rápida evolução em âmbito científico com o intuito de melhorar suas propriedades físicas e mecânicas para suprir as necessidades estéticas que são cada vez mais exigidas pela sociedade moderna. Nesse contexto, é preciso conhecer cada sistema cerâmico disponível atualmente no mercado, desde suas principais características até suas limitações, para saber indicá-lo de modo correto em cada situação clínica específica.Dental ceramics are known for their excellence in artificially reproduce natural teeth. In the XVIII century they were employed for the first time in Dentistry as artificial tooth for complete dentures. Since the XX century they were used to fabricate metal ceramic restorations and, nowadays, all-ceramic restorations are obtained as a result of ceramic technology improvement. Ceramics present a fast progress in the scientific field in order to improve their physical and mechanical properties to provide for aesthetic needs so required by modern society. In this context, it is important to know each ceramic system currently available on the market, regarding not only its main features but also its limitations, to an accurate indication for each specific clinical situation.

  17. On the energy economics of air lubrication drag reduction

    Directory of Open Access Journals (Sweden)

    Simo A. Mäkiharju

    2012-12-01

    Full Text Available Air lubrication techniques for frictional drag reduction on ships have been proposed by numerous researchers since the 19th century. However, these techniques have not been widely adopted as questions persist about their drag reduction performance beyond the laboratory, as well as energy and economic cost-benefit. This paper draws on data from the literature to consider the suitability of air lubrication for large ocean going and U.S. Great Lakes ships, by establishing the basic energy economic calculations and presenting results for a hypothetical air lubricated ship. All the assumptions made in the course of the analysis are clearly stated so that they can be refined when considering application of air lubrication to a specific ship. The analysis suggests that, if successfully implemented, both air layer and partial cavity drag reduction could lead to net energy savings of 10 to 20%, with corresponding reductions in emissions.

  18. La evolución energética del sector español de baldosas cerámicas

    Directory of Open Access Journals (Sweden)

    Monfort, E.

    2014-06-01

    Full Text Available This paper analyses how energy consumption and energy efficiency evolved in the Spanish ceramic tile industry in the 20th century and explores the emerging possibilities in the 21st century. In the last century, the tile industry undertook three radical transitions by switching from traditional biomass fuels to liquid hydrocarbon fuels (fuel oil and gas oil, and subsequently to gas fuels, mainly involving natural gas. Although it is difficult to obtain the information that enable the real energy efficiency in manufacturing plants to be reliably evaluated, the available data indicate that a high degree of efficiency has been achieved with current manufacturing technologies. Consequently, significant developments in this sense are not expected, even though efforts are still being made to reduce energy consumption in the production process. However, environmental regulations and impacts, and the emerging new energy sources based on agricultural biomass could open up new avenues for energy supply in the Spanish ceramic tile cluster.El presente texto analiza cómo ha ido evolucionando el consumo y la eficiencia energética de la industria española de baldosas cerámicas durante el siglo XX, y explora las posibilidades que se le plantean en el siglo XXI. Durante el pasado siglo este sector industrial acometió tres transiciones radicales al pasar de los combustibles tradicionales de biomasa a los hidrocarburos líquidos (fuelóleo y gasóleo, y posteriormente a los gaseosos, principalmente gas natural. Aunque la información que permite evaluar de manera fiable la eficiencia energética real en las plantas de fabricación no es fácil de obtener, los datos disponibles indican que se ha llegado a una elevada eficiencia con las tecnologías productivas actualmente utilizadas. Por tanto no se prevén cambios importantes en este aspecto, aunque siguen realizándose esfuerzos encaminados a reducir el consumo de energía en el proceso productivo. Sin

  19. Emissions reduction scenarios in the Argentinean Energy Sector

    International Nuclear Information System (INIS)

    Di Sbroiavacca, Nicolás; Nadal, Gustavo; Lallana, Francisco; Falzon, James; Calvin, Katherine

    2016-01-01

    In this paper the LEAP, TIAM-ECN, and GCAM models were applied to evaluate the impact of a variety of climate change control policies (including carbon pricing and emission constraints relative to a base year) on primary energy consumption, final energy consumption, electricity sector development, and CO_2 emission savings of the energy sector in Argentina over the 2010–2050 period. The LEAP model results indicate that if Argentina fully implements the most feasible mitigation measures currently under consideration by official bodies and key academic institutions on energy supply and demand, such as the ProBiomass program, a cumulative incremental economic cost of 22.8 billion US$(2005) to 2050 is expected, resulting in a 16% reduction in GHG emissions compared to a business-as-usual scenario. These measures also bring economic co-benefits, such as a reduction of energy imports improving the balance of trade. A Low CO_2 price scenario in LEAP results in the replacement of coal by nuclear and wind energy in electricity expansion. A High CO_2 price leverages additional investments in hydropower. By way of cross-model comparison with the TIAM-ECN and GCAM global integrated assessment models, significant variation in projected emissions reductions in the carbon price scenarios was observed, which illustrates the inherent uncertainties associated with such long-term projections. These models predict approximately 37% and 94% reductions under the High CO_2 price scenario, respectively. By comparison, the LEAP model, using an approach based on the assessment of a limited set of mitigation options, predicts an 11.3% reduction. The main reasons for this difference include varying assumptions about technology cost and availability, CO_2 storage capacity, and the ability to import bioenergy. An emission cap scenario (2050 emissions 20% lower than 2010 emissions) is feasible by including such measures as CCS and Bio CCS, but at a significant cost. In terms of technology

  20. Avaliação da adição de dolomita em massa de cerâmica de revestimento de queima vermelha

    Directory of Open Access Journals (Sweden)

    R. A. L. Soares

    2014-12-01

    Full Text Available A dolomita é um mineral encontrado em abundância no estado do Piauí, ao mesmo tempo é desconsiderada pela indústria cerâmica. A sua formação química-mineralógica aponta para uma potencialidade de aplicação em massa cerâmica de revestimento, devido à presença de óxidos fundentes e outros capazes de formar novas fases cristalinas que contribuem na melhoria da estabilidade dimensional e resistência mecânica dos corpos cerâmicos. Desta forma, o presente trabalho tem como objetivo avaliar a potencialidade do uso de um carbonato dolomítico na produção de cerâmica de revestimento de base vermelha. Para isso foram caracterizadas uma massa cerâmica usada na produção de revestimento semiporoso e dolomita oriunda de uma jazida piauiense. O carbonato foi adicionado à massa industrial em diferentes teores e as formulações foram queimadas em três temperaturas: 1080 ºC, 1120 ºC e 1160 ºC. Foram realizados nos corpos de prova queimados ensaios tecnológicos de retração linear, absorção de água, massa específica aparente e resistência mecânica. A microestrutura foi avaliada através de análise por difração de raios X e microscopia eletrônica de varredura. Os resultados mostraram potencialidade da aplicação da dolomita piauiense em massa de revestimento cerâmico.

  1. Utilização de resíduos de materiais cerâmicos na adsorção de corante azul de metileno

    Directory of Open Access Journals (Sweden)

    L. Dominguini

    2014-06-01

    Full Text Available Este trabalho estuda a viabilidade de utilização de resíduos de materiais cerâmicos como agentes de adsorção de corantes utilizados em indústrias têxteis. Resíduos de materiais cerâmicos, oriundos de quebras de tijolos, azulejos e pisos foram selecionados, triturados e moídos a uma granulometria adequada, o que possibilitou o estudo da influência do tipo de material cerâmico (resíduo e da sua granulometria sobre a adsorção do corante azul de metileno. Os resíduos cerâmicos foram separados em três diferentes granulometrias, fina (0,15 mm < Dfino< 0,30 mm, média (0,30 mm < Dmédio< 1,18 mm e grossa (1,18 mm cerâmica e granulometrias estudados. Os resultados mostraram que com o resíduo de tijolo, em uma granulometria fina, foi possível adsorver aproximadamente 76% do corante azul de metileno presente na amostra ensaiada. No entanto, os resultados também mostram que a absorção de água do material cerâmico pode não ser somente o fator que influencia na adsorção do corante.

  2. Role for cER and Mmr1p in anchorage of mitochondria at sites of polarized surface growth in budding yeast.

    Science.gov (United States)

    Swayne, Theresa C; Zhou, Chun; Boldogh, Istvan R; Charalel, Joseph K; McFaline-Figueroa, José Ricardo; Thoms, Sven; Yang, Christine; Leung, Galen; McInnes, Joseph; Erdmann, Ralf; Pon, Liza A

    2011-12-06

    Mitochondria accumulate at neuronal and immunological synapses and yeast bud tips and associate with the ER during phospholipid biosynthesis, calcium homeostasis, and mitochondrial fission. Here we show that mitochondria are associated with cortical ER (cER) sheets underlying the plasma membrane in the bud tip and confirm that a deletion in YPT11, which inhibits cER accumulation in the bud tip, also inhibits bud tip anchorage of mitochondria. Time-lapse imaging reveals that mitochondria are anchored at specific sites in the bud tip. Mmr1p, a member of the DSL1 family of tethering proteins, localizes to punctate structures on opposing surfaces of mitochondria and cER sheets underlying the bud tip and is recovered with isolated mitochondria and ER. Deletion of MMR1 impairs bud tip anchorage of mitochondria without affecting mitochondrial velocity or cER distribution. Deletion of the phosphatase PTC1 results in increased Mmr1p phosphorylation, mislocalization of Mmr1p, defects in association of Mmr1p with mitochondria and ER, and defects in bud tip anchorage of mitochondria. These findings indicate that Mmr1p contributes to mitochondrial inheritance as a mediator of anchorage of mitochondria to cER sheets in the yeast bud tip and that Ptc1p regulates Mmr1p phosphorylation, localization, and function. Copyright © 2011 Elsevier Ltd. All rights reserved.

  3. The role of energy-service demand reduction in global climate change mitigation: Combining energy modelling and decomposition analysis

    International Nuclear Information System (INIS)

    Kesicki, Fabian; Anandarajah, Gabrial

    2011-01-01

    In order to reduce energy-related CO 2 emissions different options have been considered: energy efficiency improvements, structural changes to low carbon or zero carbon fuel/technologies, carbon sequestration, and reduction in energy-service demands (useful energy). While efficiency and technology options have been extensively studied within the context of climate change mitigation, this paper addresses the possible role of price-related energy-service demand reduction. For this analysis, the elastic demand version of the TIAM-UCL global energy system model is used in combination with decomposition analysis. The results of the CO 2 emission decomposition indicate that a reduction in energy-service demand can play a limited role, contributing around 5% to global emission reduction in the 21st century. A look at the sectoral level reveals that the demand reduction can play a greater role in selected sectors like transport contributing around 16% at a global level. The societal welfare loss is found to be high when the price elasticity of demand is low. - Highlights: → A reduction in global energy-service demand can contribute around 5% to global emission reduction in the 21st century. → The role of demand is a lot higher in transport than in the residential sector. → Contribution of demand reduction is higher in early periods of the 21st century. → Societal welfare loss is found to be high when the price elasticity of demand is low. → Regional shares in residual emissions vary under different elasticity scenarios.

  4. The role of energy-service demand reduction in global climate change mitigation: Combining energy modelling and decomposition analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kesicki, Fabian, E-mail: fabian.kesicki.09@ucl.ac.uk [UCL Energy Institute, University College London, 14 Upper Woburn Place, London, WC1H 0NN (United Kingdom); Anandarajah, Gabrial [UCL Energy Institute, University College London, 14 Upper Woburn Place, London, WC1H 0NN (United Kingdom)

    2011-11-15

    In order to reduce energy-related CO{sub 2} emissions different options have been considered: energy efficiency improvements, structural changes to low carbon or zero carbon fuel/technologies, carbon sequestration, and reduction in energy-service demands (useful energy). While efficiency and technology options have been extensively studied within the context of climate change mitigation, this paper addresses the possible role of price-related energy-service demand reduction. For this analysis, the elastic demand version of the TIAM-UCL global energy system model is used in combination with decomposition analysis. The results of the CO{sub 2} emission decomposition indicate that a reduction in energy-service demand can play a limited role, contributing around 5% to global emission reduction in the 21st century. A look at the sectoral level reveals that the demand reduction can play a greater role in selected sectors like transport contributing around 16% at a global level. The societal welfare loss is found to be high when the price elasticity of demand is low. - Highlights: > A reduction in global energy-service demand can contribute around 5% to global emission reduction in the 21st century. > The role of demand is a lot higher in transport than in the residential sector. > Contribution of demand reduction is higher in early periods of the 21st century. > Societal welfare loss is found to be high when the price elasticity of demand is low. > Regional shares in residual emissions vary under different elasticity scenarios.

  5. Reduction of peak energy demand based on smart appliances energy consumption adjustment

    Science.gov (United States)

    Powroźnik, P.; Szulim, R.

    2017-08-01

    In the paper the concept of elastic model of energy management for smart grid and micro smart grid is presented. For the proposed model a method for reducing peak demand in micro smart grid has been defined. The idea of peak demand reduction in elastic model of energy management is to introduce a balance between demand and supply of current power for the given Micro Smart Grid in the given moment. The results of the simulations studies were presented. They were carried out on real household data available on UCI Machine Learning Repository. The results may have practical application in the smart grid networks, where there is a need for smart appliances energy consumption adjustment. The article presents a proposal to implement the elastic model of energy management as the cloud computing solution. This approach of peak demand reduction might have application particularly in a large smart grid.

  6. Estudio comparativo de la rugosidad superficial en cerámicas de ultra baja fusión

    OpenAIRE

    Ccahuana Vásquez, Vanessa Zulema; Leite de Oliveira Morais, Andréia Alves; Sussumu Nishioka, Renato; Tomomitsu Kimpara, Estevão

    2015-01-01

    El objetivo de este trabajo fue comparar la rugosidad superficial en cerámicas de baja y ultra baja fusión, después del pulido mecánico y exposición a un medio corrosivo in vitro. El análisis de la superficie (Ra) fue realizado con un rugosímetro. Se confeccionaron 72 discos, divididos en cuatro grupos según el sistema cerámico utilizado: VitadurAplha (G1), Titankeramik (G2), HeraCeram (G3) y Finesse (G4), y según el tratamiento de superficie: (A) especímenes sin tratamiento de superficie. (B...

  7. Renewable energy projects under the clean development mechanism : myth or reality?

    International Nuclear Information System (INIS)

    Timilsina, G.

    2005-01-01

    This paper discussed the fate of Renewable Energy (RE) in Canada. The importance of RE is now increasing from both an environmental and energy security perspective, and has been projected as a key solution to climate change problems. RE is also one of the key greenhouse gas (GHG) mitigation options to be considered under the Clean Development Mechanism (CDM). Canada possesses more than 100 GW of technical potential for RE resources, including wind, solar and small hydro. Less than 10 per cent of this potential has been exploited to date. A number of programs have been developed to facilitate the deployment of Renewable Energy Technologies (RETs), including financial incentives, renewable portfolio standards and green power procurement policies. However, Canadian policies are less aggressive than those of other countries. This study showed that the supply of certified emission reductions (CERs) resulting from negative and low cost CDM options, such as energy efficiency improvements, afforestation and reforestation, could surpass the total demand for CERs during the first commitment period of the Kyoto Protocol. Implementation of RE projects under the CDM could be undermined. It was recommended that increased support of the Global Environment Facility (GEF), use of the Special Climate Change Fund, and special attention to RE from both host and investing countries should become mandatory as alternative strategies to promote RE. In addition, it should be acknowledged that the development of RETs faces a number of barriers and challenges, including competition from conventional energy technologies; lack of customer and investor confidence; regulatory and institutional barriers; and technical barriers such as transmission access. 19 refs., 1 tab

  8. Robust energy storage scheduling for imbalance reduction of strategically formed energy balancing groups

    International Nuclear Information System (INIS)

    Chakraborty, Shantanu; Okabe, Toshiya

    2016-01-01

    Imbalance (on-line energy gap between contracted supply and actual demand, and associated cost) reduction is going to be a crucial service for a Power Producer and Supplier (PPS) in the deregulated energy market. PPS requires forward market interactions to procure energy as precisely as possible in order to reduce imbalance energy. This paper presents, 1) (off-line) an effective demand aggregation based strategy for creating a number of balancing groups that leads to higher predictability of group-wise aggregated demand, 2) (on-line) a robust energy storage scheduling that minimizes the imbalance energy and cost of a particular balancing group considering the demand prediction uncertainty. The group formation is performed by a Probabilistic Programming approach using Bayesian Markov Chain Monte Carlo (MCMC) method after applied on the historical demand statistics. Apart from the group formation, the aggregation strategy (with the help of Bayesian Inference) also clears out the upper-limit of the required storage capacity for a formed group, fraction of which is to be utilized in on-line operation. For on-line operation, a robust energy storage scheduling method is proposed that minimizes expected imbalance energy and cost (a non-linear function of imbalance energy) while incorporating the demand uncertainty of a particular group. The proposed methods are applied on the real apartment buildings' demand data in Tokyo, Japan. Simulation results are presented to verify the effectiveness of the proposed methods. - Highlights: • Strategic method for intelligent energy balancing group formation using Bayesian MCMC. • Stochastic programming based robust and online energy storage (battery) scheduling. • Imbalance cost (regulation) and energy reduction of a balancing group. • Imbalance cost reduction of 80% attainable by considerably lower battery capacity.

  9. Obtenção e análise de cerâmicas porosas com a incorporação de produtos orgânicos ao corpo cerâmico Obtaining and analysis of porous ceramic with the incorporation of organic products to the ceramic body

    Directory of Open Access Journals (Sweden)

    R. P. S. Dutra

    2002-12-01

    Full Text Available As cerâmicas porosas possuem um elevado potencial para serem usadas em diversas aplicações importantes. Combinando adequadamente matérias-primas e técnicas de processamento, é possível obter cerâmicas porosas com elevados valores de resistência mecânica, resistência ao ataque químico, elevada refratariedade e elevada uniformidade estrutural. Entre os vários métodos de obtenção de cerâmica porosa, o método de incorporação de produtos orgânicos ao corpo cerâmico é bastante utilizado quando se deseja trabalhar com a porosidade do produto. No entanto, muitas variáveis devem ser analisadas, a começar pela quantidade de material orgânico adicionado ao corpo cerâmico. Este trabalho tem como objetivo a elaboração de cerâmicas porosas com a incorporação do pó-de-madeira ao corpo cerâmico e a análise das propriedades físicas e mecânicas deste material com a variação da temperatura de processamento. Os resultados indicaram que o método é viável, constatando um aumento da fração de poros com a adição do material orgânico e boa resistência mecânica do material.The porous ceramic have a high potential to be used in several important applications. Combining raw materials with processing techniques appropriately is possible to obtain porous ceramic with high values of mechanical resistance, resistance to the chemical attack, high refratariety and high structural uniformity. Among the several methods of obtaining porous ceramic, the method of incorporation organic products of the ceramic body is very used when wish work with the porosity of the product. However, many variety should be analyzed, to begin the amount of organic material added to the ceramic body. This work has as objective the elaboration of porous ceramic with the incorporation of the wood powder to the ceramic body and the analysis of the physical and mechanical properties of this material with the variation of the processing temperature. The

  10. Desenvolvimento e caracterização de cerâmicas para fabricação de próteses dentárias

    OpenAIRE

    RAMOS FILHO, Fernando Bezerra

    2008-01-01

    Atualmente, as qualidades dos produtos e do processamento têm vital importância em quase todos os setores econômicos em nossa sociedade. O desenvolvimento e caracterização de cerâmica para fabricação de próteses dentária vêm sendo buscados através de vários trabalhos ao longo da história. As cerâmicas odontológicas podem consistir principalmente em vidros, porcelanas, cerâmicas vítreas ou estruturas cristalinas. Elas possuem propriedades químicas, mecânicas, físicas e térmic...

  11. Técnicas de indentación: medición de propiedades mecánicas en cerámicas

    Directory of Open Access Journals (Sweden)

    JUAN MANUEL MEZA

    2006-01-01

    Full Text Available Las técnicas de indentación poseen una gran versatilidad que permite evaluar propiedades mecánicas en volúmenes inferiores a 0.001 mm3, hasta volúmenes del orden de los mm3, útil tanto en materiales compuestos como en volumen. Este artículo hace una revisión general de los fundamentos de éstas técnicas. También se muestran algunas de las dificultades que surgen cuando éstas son aplicadas a la medición de propiedades mecánicas de materiales cerámicos, tales como su dureza tenacidad a la fractura, módulo de elasticidad y adherencia de capas cerámicas en sustratos metálicos. Para esto se utilizan algunos materiales cerámicos en volumen como alúmina Al2O3, Titanato de Bario BaTiO3 y capas TiN depositadas sobre acero M2.

  12. In the field of energy cost reduction, what is the potential?; En matiere de reduction des depenses d`energie: quel est le gisement?

    Energy Technology Data Exchange (ETDEWEB)

    Millet, B. [Departement Industrie, CEREN (France)

    1996-12-31

    Through a segmentation of the fuel and electric power consumptions in the various industrial sectors and energy consumption process types in France in 1990, the energy conservation potential in the French metalworking and mechanical industry is analyzed and its evolution up to 2005 is assessed. It is shown that the reduction potential amounts to 450 kTep or 20 percent of the metalworking and metallic construction industry energy consumption, with an important part for the out-of-process sector (space heating, compressed air production, lighting). In the process sector, important reductions could be realized in thermal treatments and metal heating prior forming

  13. Characterization of high-energy milled alumina powders Caracterização de pós de alumina submetidos a moagem de alta energia

    Directory of Open Access Journals (Sweden)

    Roberto Tomasi

    1998-10-01

    Full Text Available The utilization of reactive high-energy milling has been reported for the synthesis of ceramic powders namely, metal oxides, carbides, borides, nitrides or mixtures of ceramics or ceramic and metal compounds. In this work, high-energy milling was used for reduction of alumina powders to nanometric particle size. The ceramic characteristics of the powders were analyzed in terms of the behavior during deagglomeration, compaction curves, sintering and microstructure characterization. It was observed that the high energy milling has strong effect in producing agglomeration of the nanosized powders. This effect is explained by the high-energy impact of the balls, which may fracture particles or just cause the particles compacting. In this case, strong agglomerates are produced. As the powder surface area increases, stronger agglomerates are produced.Tem sido amplamente divulgada a utilização da moagem reativa de alta energia para a síntese de pós cerâmicos de óxidos de metais, carbetos, boretos, nitretos ou misturas de compostos cerâmicos ou compostos cerâmicos e metálicos. Neste trabalho, a moagem de alta energia (não reativa foi utilizada para a redução de pós de alumina para partículas de dimensões nanométricas. As características cerâmicas dos pós obtidos foram analisadas a partir de resultados de comportamento durante a desaglomeração, curvas de densificação, sinterização e caracterização de microestrutura. Observou-se que a moagem de alta energia tem forte efeito de aglomeração dos pós com partículas em dimensões nanométricas. Esse efeito é explicado pelo impacto de alta energia das bolas, os quais podem fraturar as partículas ou apenas causar a compactação das mesmas. Nesse último caso, que sempre ocorre, são formados aglomerados de alta resistência. O aumento da área superficial do pó produz aglomerados mais resistentes.

  14. Estudio arqueométrico de figurillas cerámicas mayas de Calakmul (Campeche, México

    Directory of Open Access Journals (Sweden)

    García-Heras, M.

    2006-08-01

    Full Text Available The results derived from an archaeometric characterization study undertaken on a representative ensemble of Late Classic ceramic figurines coming from the archaeological field work carried out in the Mayan town of Calakmul (Campeche, México are reported and discussed in this paper. The main goals of the research were to gather some information on the technology of manufacture of these ceramics and provide some insights into their probable provenance. The archaeometric characterization was accomplished through the following complementary techniques: conventional optical microscopy (OM, X-ray powder diffraction (XRD, Fourier transform infrared spectroscopy (FT-IR and X-ray fluorescence (XRF. In order to isolate ceramic groups with a similar chemical profile, XRF data were also analyzed by exploratory multivariate statistical techniques. The resulting data indicate that most of the figurines were locally manufactured from a calcium carbonate (calcite-rich clay raw material. A small ceramic group containing mixed calcium and magnesium carbonates (dolomite, which could be foreign or from other area of the Calakmul region, was also identified. These data suggest that the production of ceramic figurines could be associated to workshops linked to the monopoly on ceramic production performed by the centralized power of the town of Calakmul during this period.

    En este trabajo se presentan y discuten los resultados de la caracterización arqueométrica realizada sobre un conjunto representativo de figurillas cerámicas del Clásico Tardío procedentes de las excavaciones arqueológicas efectuadas en la ciudad maya de Calakmul (Campeche, México. Los objetivos principales han sido recabar información sobre la tecnología de manufactura de estas cerámicas y evaluar su posible procedencia. La caracterización arqueométrica se ha llevado a cabo mediante las siguientes técnicas complementarias: microscopía óptica convencional (MO, difracción de

  15. Choque térmico em filtros cerâmicos do sistema Al2O3-SiC

    OpenAIRE

    Salvini, V. R.; Innocentini, M. D. M.; Pandolfelli, V. C.

    2002-01-01

    Em diversas aplicações as cerâmicas celulares são submetidas a tensões térmicas severas, tal como na filtração de metais fundidos. Contudo, há poucos estudos sobre o desempenho ao choque térmico destes materiais. Uma das razões é que a metodologia para análise desta classe de materiais deve ser distinta daquela utilizada para os materiais cerâmicos densos. Isto porque no caso dos materiais celulares para filtração de metais fundidos o meio causador do choque térmico infiltra-se rapidamente na...

  16. Effect of serial infusions of reconstituted high-density lipoprotein (CER-001) on coronary atherosclerosis: rationale and design of the CARAT study.

    Science.gov (United States)

    Andrews, Jordan; Janssan, Alex; Nguyen, Tracy; Pisaniello, Anthony D; Scherer, Daniel J; Kastelein, John J P; Merkely, Bela; Nissen, Steven E; Ray, Kausik; Schwartz, Gregory G; Worthley, Stephen G; Keyserling, Connie; Dasseux, Jean-Louis; Butters, Julie; Girardi, Jacinta; Miller, Rosemary; Nicholls, Stephen J

    2017-02-01

    High-density lipoprotein (HDL) is believed to have atheroprotective properties, but an effective HDL-based therapy remains elusive. Early studies have suggested that infusion of reconstituted HDL promotes reverse cholesterol transport and vascular reactivity. The CER-001 Atherosclerosis Regression Acute Coronary Syndrome Trial (CARAT) is investigating the impact of infusing an engineered pre-beta HDL mimetic containing sphingomyelin (SM) and dipalmitoyl phosphatidlyglycerol (CER-001) on coronary atheroma volume in patients with a recent acute coronary syndrome (ACS). The CARAT is a phase 2, multicenter trial in which 292 patients with an ACS undergoing intracoronary ultrasonography and showing percent atheroma volume (PAV) greater than 30% are randomly assigned to treatment with ten infusions of CER-001 3 mg/kg or matching placebo, administered at weekly intervals. Intracoronary ultrasonography is repeated at the end of the treatment period. The primary endpoint is the nominal change in PAV. Safety and tolerability will also be evaluated. CARAT will establish whether serial 3 mg/kg infusions of an engineered pre-beta HDL mimetic containing SM and dipalmitoyl phosphatidlyglycerol (CER-001) will regress atherosclerotic plaque in patients with a recent ACS.

  17. Applying the energy productivity index that considers maximized energy reduction on SADC (Southern Africa Development Community) members

    International Nuclear Information System (INIS)

    Chang, Ming-Chung

    2016-01-01

    Under the trend of global energy prices continuously going up, this paper considers the concept of maximized energy reduction to model the energy productivity index by decomposing it into energy technical change and energy efficiency change. The paper takes the eight SADC (Southern Africa Development Community ) members as an example to estimate their energy efficiency, energy productivity change, energy technical change, energy efficiency change, and rebound effect on energy use, as well as to test the Jevons Paradox. The time period of the data spans 2005 to 2009. The empirical result shows large energy performance differences among the eight SADC members. Not one country among the eight members is an energy technology innovator. After calculating the rebound effect and testing the Jevons Paradox, the result shows that there seems to be no obvious Jevons Paradox in this economic region. - Highlights: • This paper discusses the concept of maximized energy reduction. • The method is applied towards the Southern Africa Development Community members. • This paper also investigates the rebound effect of energy use. • We offer suggestions on energy use and CO 2 emission reductions.

  18. Caracterização etnopedológica de Planossolos utilizados em cerâmica artesanal no Agreste Paraibano

    OpenAIRE

    Alves,Ângelo Giuseppe Chaves; Marques,José Geraldo Wanderley; Queiroz,Sandra Barreto de; Silva,Ivandro de França da; Ribeiro,Mateus Rosas

    2005-01-01

    Técnicas adaptadas da etnociência clássica foram utilizadas para descrever e avaliar os conhecimentos de um grupo de artesãos camponeses do Agreste Paraibano sobre alguns solos que eles usam como recurso cerâmico. Cinco perfis de solo foram descritos por agrônomos-pesquisadores (abordagem eticista) e por camponeses (abordagem emicista), em locais onde a população local extrai material para cerâmica. Amostras coletadas em ambas as abordagens foram usadas para caracterização morfológica e analí...

  19. A financing model to solve financial barriers for implementing green building projects.

    Science.gov (United States)

    Lee, Sanghyo; Lee, Baekrae; Kim, Juhyung; Kim, Jaejun

    2013-01-01

    Along with the growing interest in greenhouse gas reduction, the effect of greenhouse gas energy reduction from implementing green buildings is gaining attention. The government of the Republic of Korea has set green growth as its paradigm for national development, and there is a growing interest in energy saving for green buildings. However, green buildings may have financial barriers that have high initial construction costs and uncertainties about future project value. Under the circumstances, governmental support to attract private funding is necessary to implement green building projects. The objective of this study is to suggest a financing model for facilitating green building projects with a governmental guarantee based on Certified Emission Reduction (CER). In this model, the government provides a guarantee for the increased costs of a green building project in return for CER. And this study presents the validation of the model as well as feasibility for implementing green building project. In addition, the suggested model assumed governmental guarantees for the increased cost, but private guarantees seem to be feasible as well because of the promising value of the guarantee from CER. To do this, certification of Clean Development Mechanisms (CDMs) for green buildings must be obtained.

  20. Designing building energy efficiency programs for greenhouse gas reductions

    International Nuclear Information System (INIS)

    Blackhurst, Michael; Lima Azevedo, Ines; Scott Matthews, H.; Hendrickson, Chris T.

    2011-01-01

    Costs and benefits of building energy efficiency are estimated as a means of reducing greenhouse gas emissions in Pittsburgh, PA and Austin, TX. The analysis includes electricity and natural gas consumption, covering 75% of building energy consumption in Pittsburgh and 85% in Austin. Two policy objectives were evaluated: maximize GHG reductions given initial budget constraints or maximize social savings given target GHG reductions. This approach evaluates the trade-offs between three primary and often conflicting program design parameters: initial capital constraints, social savings, and GHG reductions. Results suggest uncertainty in local stocks, demands, and efficiency significantly impacts anticipated outcomes. Annual GHG reductions of 1 ton CO 2 eq/capita/yr in Pittsburgh could cost near nothing or over $20 per capita annually. Capital-constrained policies generate slightly less social savings (a present value of a few hundred dollars per capita) than policies that maximize social savings. However, sectors and end uses targeted for intervention vary depending on policy objectives and constraints. Optimal efficiency investment strategies for some end uses vary significantly (in excess of 100%) between Pittsburgh and Austin, suggesting that resources and guidance conducted at the national scale may mislead state and local decision-makers. Results are used to provide recommendations for efficiency program administrators. - Highlights: → We use public data to estimate local building energy costs, benefits and greenhouse gas reductions. → We use optimization to evaluate trade-offs between program objectives and capital constraints. → Local energy market conditions significantly influence efficiency expectations. → Different program objectives can lead to different effective investment strategies. → We reflect on the implications of our results for efficiency program design.

  1. Designing building energy efficiency programs for greenhouse gas reductions

    Energy Technology Data Exchange (ETDEWEB)

    Blackhurst, Michael, E-mail: mfb@andrew.cmu.edu [Department of Civil, Architectural and Environmental Engineering, University of Texas at Austin, 1 University Station C1752, Austin, TX 78712 (United States); Lima Azevedo, Ines, E-mail: iazevedo@cmu.edu [Department of Engineering and Public Policy, Carnegie Mellon University, 119 Porter Hall, Pittsburgh, PA 15213 (United States); Scott Matthews, H., E-mail: hsm@cmu.edu [Department of Engineering and Public Policy, Carnegie Mellon University, 119 Porter Hall, Pittsburgh, PA 15213 (United States); Department of Civil and Environmental Engineering, Carnegie Mellon University, 119 Porter Hall, Pittsburgh, PA 15213 (United States); Hendrickson, Chris T., E-mail: cth@andrew.cmu.edu [Department of Civil and Environmental Engineering, Carnegie Mellon University, 119 Porter Hall, Pittsburgh, PA 15213 (United States)

    2011-09-15

    Costs and benefits of building energy efficiency are estimated as a means of reducing greenhouse gas emissions in Pittsburgh, PA and Austin, TX. The analysis includes electricity and natural gas consumption, covering 75% of building energy consumption in Pittsburgh and 85% in Austin. Two policy objectives were evaluated: maximize GHG reductions given initial budget constraints or maximize social savings given target GHG reductions. This approach evaluates the trade-offs between three primary and often conflicting program design parameters: initial capital constraints, social savings, and GHG reductions. Results suggest uncertainty in local stocks, demands, and efficiency significantly impacts anticipated outcomes. Annual GHG reductions of 1 ton CO{sub 2} eq/capita/yr in Pittsburgh could cost near nothing or over $20 per capita annually. Capital-constrained policies generate slightly less social savings (a present value of a few hundred dollars per capita) than policies that maximize social savings. However, sectors and end uses targeted for intervention vary depending on policy objectives and constraints. Optimal efficiency investment strategies for some end uses vary significantly (in excess of 100%) between Pittsburgh and Austin, suggesting that resources and guidance conducted at the national scale may mislead state and local decision-makers. Results are used to provide recommendations for efficiency program administrators. - Highlights: > We use public data to estimate local building energy costs, benefits and greenhouse gas reductions. > We use optimization to evaluate trade-offs between program objectives and capital constraints. > Local energy market conditions significantly influence efficiency expectations. > Different program objectives can lead to different effective investment strategies. > We reflect on the implications of our results for efficiency program design.

  2. Technical analysis on energy conservation and emission reduction of new energy electric vehicle in China

    Science.gov (United States)

    Zheng, Chaocheng

    2017-10-01

    With the global environmental problems and energy crisis continuously emerging, all countries are taking active measures to achieve the benign development of domestic economy and society. Vehicle, as a large oil consumption and emissions of carbon dioxide, nend to be a revolutionary change. Therefore, the development of new energy electric vehicle has become the consensus of the world. On this background, this paper has sorted out the current state and the related development planning of new energy electric vehicles in different countries to predict the car ownership of the new energy electric vehicles using elastic coefficient method and setting different path of development, conclude that under the consideration of energy conservation and emissions reduction factors, our country should mainly promote the BEV to realize the maximum energy conservation and emissions reduction.

  3. Heterocoagulação como técnica para obtenção de cerâmicas porosas Porous ceramics through heterocoagulation process

    Directory of Open Access Journals (Sweden)

    M. O. Carlos

    2005-06-01

    Full Text Available Devido ao custo da energia, tem crescido o interesse pelo uso de cerâmicas refratárias porosas como isolantes térmicos para aplicações em altas temperaturas. Isso se deve ao fato desses materiais aliarem propriedades intrínsecas das cerâmicas, como inércia química e refratariedade, à baixa condutividade térmica dos porosos. Uma das técnicas utilizadas na obtenção desses materiais consiste na adição de compostos orgânicos à matriz cerâmica, os quais volatilizam durante a queima. Essa técnica pode ter seu desempenho aprimorado (porosidade controlada pela utilização da heterocoagulação entre as partes inorgânicas e orgânicas. O objetivo desse trabalho foi avaliar o impacto da heterocoagulação na fabricação de cerâmicas porosas utilizando PVC ou amido como aditivo orgânico e alumina como componente inorgânico. Foram definidas as condições mais favoráveis à heterocoagulação para os dois incorporadores. Independente do tipo de incorporador, o aumento do teor utilizado resultou em cerâmicas mais porosas. Entretanto, um teor máximo de 50vol% do material orgânico foi escolhido, uma vez que maiores teores resultam em uma resistência mecânica insatisfatória. Verificou-se ainda que, em comparação com o processo convencional, as cerâmicas produzidas por heterocoagulação apresentaram maior homogeneidade microestrutural e resistência mecânica.The crisis faced by the energy sector has led to a growing interest in the use of refractory porous ceramics as high temperature insulators, due to their unique combination of properties: chemical inertia, refractoriness and low thermal conductivity. Among the several techniques employed in the production of these materials, the addition of organic particles, which volatilize during the first heat-up, to the ceramic matrix is one of the most promising techniques. This procedure can be optimized in order to attain a better control over the porosity using the

  4. Obtenção de cerâmicas ferroelétricas de Gd2Mo3O12 e o puxamento de fibras monocristalinas

    Directory of Open Access Journals (Sweden)

    Ferrari C. R.

    2001-01-01

    Full Text Available Nesse trabalho abordamos a obtenção do material cerâmico Gd2Mo3O12 na sua fase beta, denominado beta-GMO, utilizando-se do método convencional de mistura de óxidos e reação do estado sólido. MoO3 e o Gd2O3 nas razões molares 3:1 e 3,25:1 foram usados como pós de partida. Cerâmicas sinterizadas foram usadas como pedestais e sementes na produção de fibras monocristalinas pela técnica Laser Heated Pedestal Growth- LHPG. A cerâmica com fase única Gd2Mo3O12 foi melhor obtida usando a razão molar 3:1 entre os pós de partida. Por outro lado, fibras cristalinas obtidas a partir de pedestais cerâmicos com excesso de MoO3 apresentaram melhor qualidade óptica e a estequiometria desejada.

  5. The β-Ketoacyl-CoA Synthase HvKCS1, Encoded by Cer-zh, Plays a Key Role in Synthesis of Barley Leaf Wax and Germination of Barley Powdery Mildew.

    Science.gov (United States)

    Li, Chao; Haslam, Tegan M; Krüger, Anna; Schneider, Lizette M; Mishina, Kohei; Samuels, Lacey; Yang, Hongxing; Kunst, Ljerka; Schaffrath, Ulrich; Nawrath, Christiane; Chen, Guoxiong; Komatsuda, Takao; von Wettstein-Knowles, Penny

    2018-04-01

    The cuticle coats the primary aerial surfaces of land plants. It consists of cutin and waxes, which provide protection against desiccation, pathogens and herbivores. Acyl cuticular waxes are synthesized via elongase complexes that extend fatty acyl precursors up to 38 carbons for downstream modification pathways. The leaves of 21 barley eceriferum (cer) mutants appear to have less or no epicuticular wax crystals, making these mutants excellent tools for identifying elongase and modification pathway biosynthetic genes. Positional cloning of the gene mutated in cer-zh identified an elongase component, β-ketoacyl-CoA synthase (CER-ZH/HvKCS1) that is one of 34 homologous KCSs encoded by the barley genome. The biochemical function of CER-ZH was deduced from wax and cutin analyses and by heterologous expression in yeast. Combined, these experiments revealed that CER-ZH/HvKCS1 has a substrate specificity for C16-C20, especially unsaturated, acyl chains, thus playing a major role in total acyl chain elongation for wax biosynthesis. The contribution of CER-ZH to water barrier properties of the cuticle and its influence on the germination of barley powdery mildew fungus were also assessed.

  6. Aderência de revestimentos em paredes de blocos cerâmicos com função estrutural

    Directory of Open Access Journals (Sweden)

    Jefferson Sidney Camacho

    Full Text Available Resumo O presente trabalho tem por objetivo verificar o comportamento mecânico dos revestimentos cerâmicos frente aos carregamentos na alvenaria estrutural. Neste estudo são apresentados os resultados experimentais e conclusões sobre o comportamento de paredes revestidas quando submetidas a carregamentos verticais crescentes até a ruptura. Os revestimentos foram fixados com argamassa colante industrial, aplicados em paredes de blocos cerâmicos com e sem emboço. Ao longo dos ensaios foram registrados todos os eventos considerados importantes, tais como deformações, início de fissuração, descolamento dos revestimentos, formas e cargas de rupturas. Dessa forma, foi possível quantificar a relação dos carregamentos presentes nas paredes com as fissurações e desprendimentos dos revestimentos cerâmicos, onde se pode verificar que os problemas patológicos ocorreram próximos aos limites de carregamento da estrutura, indicando que o sistema de revestimentos não sofreram relativas alterações visuais e mecânicas dentro do regime estrutural de utilização.

  7. Caracterización de Arcillas del Estado de Guanajuato y su Potencial Aplicación en Cerámica Caracterización de Arcillas del Estado de Guanajuato y su Potencial Aplicación en Cerámica

    Directory of Open Access Journals (Sweden)

    Yolanda Gallaga Ortega

    2012-02-01

    Full Text Available The ceramic industry is a very important activity in several municipalities of the state of Guanajuato, where a significant and constant demand is kept for clay as raw material to formulate pastes used in the manufacturing of utilitarian and ornamental ceramic products. Traditionally, there have existed evidences about important clay deposits in the state of Guanajuato with suitable ceramic properties, which have not been completely characterized or quantified. Thus, considering the relevance of this raw materials to the ceramic industry in the region, as well as the difficulties to dispose of ceramic commercial materials with high and homogeneous quality at a low cost, the Centro de Investigaciones en Química Inorgánica and the Dirección de Fomento Minero del Estado de Guanajuato established a collaborating project focused on the study of the selected clay deposits and taking into account the following aspects: clay characterization, evaluation of the ceramic properties and calculation of the existing reserves. In this paper the results of the chemical and mineralogical characterization of the clays in the selected zone samples are presented. The results were reviewed with respect to the obtained values in the characterization of the commercial pastes ordinarily used by the potters in order to establish an initial estimation about the real potential of the clay deposits studied. La industria cerámica es una actividad muy importante en varios municipios del estado de Guanajuato, donde se mantiene una gran demanda de arcillas como materia prima para la formulación de pastas en la manufactura de productos cerámicos utilitarios y ornamentales. Tradicionalmente han existido evidencias de yacimientos importantes de arcillas de calidad cerámica en el estado de Guanajuato, pero aún no han sido completamente caracterizados y cuantificados. Así, considerando la importancia de esta materia prima para la industria cerámica de la región, y las

  8. Effect of open-label infusion of an apoA-I-containing particle (CER-001) on RCT and artery wall thickness in patients with FHA.

    Science.gov (United States)

    Kootte, Ruud S; Smits, Loek P; van der Valk, Fleur M; Dasseux, Jean-Louis; Keyserling, Constance H; Barbaras, Ronald; Paolini, John F; Santos, Raul D; van Dijk, Theo H; Dallinga-van Thie, Geesje M; Nederveen, Aart J; Mulder, Willem J M; Hovingh, G Kees; Kastelein, John J P; Groen, Albert K; Stroes, Erik S

    2015-03-01

    Reverse cholesterol transport (RCT) contributes to the anti-atherogenic effects of HDL. Patients with the orphan disease, familial hypoalphalipoproteinemia (FHA), are characterized by decreased tissue cholesterol removal and an increased atherogenic burden. We performed an open-label uncontrolled proof-of-concept study to evaluate the effect of infusions with a human apoA-I-containing HDL-mimetic particle (CER-001) on RCT and the arterial vessel wall in FHA. Subjects received 20 infusions of CER-001 (8 mg/kg) during 6 months. Efficacy was assessed by measuring (apo)lipoproteins, plasma-mediated cellular cholesterol efflux, fecal sterol excretion (FSE), and carotid artery wall dimension by MRI and artery wall inflammation by (18)F-fluorodeoxyglucose-positron emission tomography/computed tomography scans. We included seven FHA patients: HDL-cholesterol (HDL-c), 13.8 [1.8-29.1] mg/dl; apoA-I, 28.7 [7.9-59.1] mg/dl. Following nine infusions in 1 month, apoA-I and HDL-c increased directly after infusion by 27.0 and 16.1 mg/dl (P = 0.018). CER-001 induced a 44% relative increase (P = 0.018) in in vitro cellular cholesterol efflux with a trend toward increased FSE (P = 0.068). After nine infusions of CER-001, carotid mean vessel wall area decreased compared with baseline from 25.0 to 22.8 mm(2) (P = 0.043) and target-to-background ratio from 2.04 to 1.81 (P = 0.046). In FHA-subjects, CER-001 stimulates cholesterol mobilization and reduces artery wall dimension and inflammation, supporting further evaluation of CER-001 in FHA patients. Copyright © 2015 by the American Society for Biochemistry and Molecular Biology, Inc.

  9. The effectiveness of energy service demand reduction: A scenario analysis of global climate change mitigation

    International Nuclear Information System (INIS)

    Fujimori, S.; Kainuma, M.; Masui, T.; Hasegawa, T.; Dai, H.

    2014-01-01

    A reduction of energy service demand is a climate mitigation option, but its effectiveness has never been quantified. We quantify the effectiveness of energy service demand reduction in the building, transport, and industry sectors using the Asia-Pacific Integrated Assessment/Computable General Equilibrium (AIM/CGE) model for the period 2015–2050 under various scenarios. There were two major findings. First, a 25% energy service demand reduction in the building, transport, and basic material industry sectors would reduce the GDP loss induced by climate mitigation from 4.0% to 3.0% and from 1.2% to 0.7% in 2050 under the 450 ppm and 550 ppm CO 2 equivalent concentration stabilization scenarios, respectively. Second, the effectiveness of a reduction in the building sector's energy service demand would be higher than those of the other sectors at the same rate of the energy service demand reduction. Furthermore, we also conducted a sensitivity analysis of different socioeconomic conditions, and the climate mitigation target was found to be a key determinant of the effectiveness of energy service demand reduction measures. Therefore, more certain climate mitigation targets would be useful for the decision makers who design energy service demand reduction measures. - Highlights: • The effectiveness of a reduction in energy service demand is quantified. • A 25% reduction in energy service demand would be equivalent to 1% of GDP in 2050. • Stringent mitigation increases the effectiveness of energy service demand reduction. • Effectiveness of a reduction in energy demand service is higher in the building sector

  10. Opportunities and challenges for comparative effectiveness research (CER) with Electronic Clinical Data: a perspective from the EDM forum.

    Science.gov (United States)

    Holve, Erin; Segal, Courtney; Hamilton Lopez, Marianne

    2012-07-01

    The Electronic Data Methods (EDM) Forum brings together perspectives from the Prospective Outcome Systems using Patient-specific Electronic data to Compare Tests and therapies (PROSPECT) studies, the Scalable Distributed Research Networks, and the Enhanced Registries projects. This paper discusses challenges faced by the research teams as part of their efforts to develop electronic clinical data (ECD) infrastructure to support comparative effectiveness research (CER). The findings reflect a set of opportunities for transdisciplinary learning, and will ideally enhance the transparency and generalizability of CER using ECD. Findings are based on 6 exploratory site visits conducted under naturalistic inquiry in the spring of 2011. Themes, challenges, and innovations were identified in the visit summaries through coding, keyword searches, and review for complex concepts. : The identified overarching challenges and emerging opportunities include: the substantial level of effort to establish and sustain data sharing partnerships; the importance of understanding the strengths and limitations of clinical informatics tools, platforms, and models that have emerged to enable research with ECD; the need for rigorous methods to assess data validity, quality, and context for multisite studies; and, emerging opportunities to achieve meaningful patient and consumer engagement and work collaboratively with multidisciplinary teams. The new infrastructure must evolve to serve a diverse set of potential users and must scale to address a range of CER or patient-centered outcomes research (PCOR) questions. To achieve this aim-to improve the quality, transparency, and reproducibility of CER and PCOR-a high level of collaboration and support is necessary to foster partnership and best practices as part of the EDM Forum.

  11. Identifying appropriate reference data models for comparative effectiveness research (CER) studies based on data from clinical information systems.

    Science.gov (United States)

    Ogunyemi, Omolola I; Meeker, Daniella; Kim, Hyeon-Eui; Ashish, Naveen; Farzaneh, Seena; Boxwala, Aziz

    2013-08-01

    The need for a common format for electronic exchange of clinical data prompted federal endorsement of applicable standards. However, despite obvious similarities, a consensus standard has not yet been selected in the comparative effectiveness research (CER) community. Using qualitative metrics for data retrieval and information loss across a variety of CER topic areas, we compare several existing models from a representative sample of organizations associated with clinical research: the Observational Medical Outcomes Partnership (OMOP), Biomedical Research Integrated Domain Group, the Clinical Data Interchange Standards Consortium, and the US Food and Drug Administration. While the models examined captured a majority of the data elements that are useful for CER studies, data elements related to insurance benefit design and plans were most detailed in OMOP's CDM version 4.0. Standardized vocabularies that facilitate semantic interoperability were included in the OMOP and US Food and Drug Administration Mini-Sentinel data models, but are left to the discretion of the end-user in Biomedical Research Integrated Domain Group and Analysis Data Model, limiting reuse opportunities. Among the challenges we encountered was the need to model data specific to a local setting. This was handled by extending the standard data models. We found that the Common Data Model from the OMOP met the broadest complement of CER objectives. Minimal information loss occurred in mapping data from institution-specific data warehouses onto the data models from the standards we assessed. However, to support certain scenarios, we found a need to enhance existing data dictionaries with local, institution-specific information.

  12. Up-regulation of tumor suppressor genes by exogenous dhC16-Cer contributes to its anti-cancer activity in primary effusion lymphoma.

    Science.gov (United States)

    Cao, Yueyu; Qiao, Jing; Lin, Zhen; Zabaleta, Jovanny; Dai, Lu; Qin, Zhiqiang

    2017-02-28

    Primary effusion lymphoma (PEL) is a rare and highly aggressive B-cell malignancy with Kaposi's sarcoma-associated herpesvirus (KSHV) infection, while lack of effective therapies. Our recent data indicated that targeting the sphingolipid metabolism by either sphingosine kinase inhibitor or exogenous ceramide species induces PEL cell apoptosis and suppresses tumor progression in vivo. However, the underlying mechanisms for these exogenous ceramides "killing" PEL cells remain largely unknown. Based on the microarray analysis, we found that exogenous dhC16-Cer treatment affected the expression of many cellular genes with important functions within PEL cells such as regulation of cell cycle, cell survival/proliferation, and apoptosis/anti-apoptosis. Interestingly, we found that a subset of tumor suppressor genes (TSGs) was up-regulated from dhC16-Cer treated PEL cells. One of these elevated TSGs, Thrombospondin-1 (THBS1) was required for dhC16-Cer induced PEL cell cycle arrest. Moreover, dhC16-Cer up-regulation of THBS1 was through the suppression of multiple KSHV microRNAs expression. Our data demonstrate that exogenous ceramides display anti-cancer activities for PEL through regulation of both host and oncogenic virus factors.

  13. Filtros cerámicos, una alternativa de agua segura

    OpenAIRE

    Lerma Arias, Daniel Alberto

    2012-01-01

    Ante las bajas coberturas de acueducto y alcantarillado en la zona rural de Colombia y los altos costos de implementación de sistemas de potabilización y distribución convencionales es importante evaluar la viabilidad técnica y económica de sistemas alternativos de tratamiento de agua potable al alcance de comunidades rurales y de bajos recursos; por tanto se analiza una tecnología alternativa que aun no ha sido probada en Colombia como son los filtros cerámicos impregnados con plata coloidal...

  14. Energy reduction through voltage scaling and lightweight checking

    Science.gov (United States)

    Kadric, Edin

    As the semiconductor roadmap reaches smaller feature sizes and the end of Dennard Scaling, design goals change, and managing the power envelope often dominates delay minimization. Voltage scaling remains a powerful tool to reduce energy. We find that it results in about 60% geomean energy reduction on top of other common low-energy optimizations with 22nm CMOS technology. However, when voltage is reduced, it becomes easier for noise and particle strikes to upset a node, potentially causing Silent Data Corruption (SDC). The 60% energy reduction, therefore, comes with a significant drop in reliability. Duplication with checking and triple-modular redundancy are traditional approaches used to combat transient errors, but spending 2--3x the energy for redundant computation can diminish or reverse the benefits of voltage scaling. As an alternative, we explore the opportunity to use checking operations that are cheaper than the base computation they are guarding. We devise a classification system for applications and their lightweight checking characteristics. In particular, we identify and evaluate the effectiveness of lightweight checks in a broad set of common tasks in scientific computing and signal processing. We find that the lightweight checks cost only a fraction of the base computation (0-25%) and allow us to recover the reliability losses from voltage scaling. Overall, we show about 50% net energy reduction without compromising reliability compared to operation at the nominal voltage. We use FPGAs (Field-Programmable Gate Arrays) in our work, although the same ideas can be applied to different systems. On top of voltage scaling, we explore other common low-energy techniques for FPGAs: transmission gates, gate boosting, power gating, low-leakage (high-Vth) processes, and dual-V dd architectures. We do not scale voltage for memories, so lower voltages help us reduce logic and interconnect energy, but not memory energy. At lower voltages, memories become dominant

  15. A Summary of Research on Energy Saving and Emission Reduction of Transportation

    Science.gov (United States)

    Cheng, Dongxiang; Wu, Lufen

    2017-12-01

    Road transport is an important part of transportation, and road in the field of energy-saving emission reduction is a very important industry. According to the existing problems of road energy saving and emission reduction, this paper elaborates the domestic and international research on energy saving and emission reduction from three aspects: road network optimization, pavement material and pavement maintenance. Road network optimization may be overlooked, and the research content is still relatively preliminary; pavement materials mainly from the asphalt pavement temperature mixed asphalt technology research; pavement maintenance technology development is relatively comprehensive.

  16. Potential energy savings and CO2 emissions reduction of China's cement industry

    International Nuclear Information System (INIS)

    Ke, Jing; Zheng, Nina; Fridley, David; Price, Lynn; Zhou, Nan

    2012-01-01

    This study analyzes current energy and carbon dioxide (CO 2 ) emission trends in China's cement industry as the basis for modeling different levels of cement production and rates of efficiency improvement and carbon reduction in 2011–2030. Three cement output projections are developed based on analyses of historical production and physical and macroeconomic drivers. For each of these three production projections, energy savings and CO 2 emission reduction potentials are estimated in a best practice scenario and two continuous improvement scenarios relative to a frozen scenario. The results reveal the potential for cumulative final energy savings of 27.1 to 37.5 exajoules and energy-related direct emission reductions of 3.2 to 4.4 gigatonnes in 2011–2030 under the best practice scenarios. The continuous improvement scenarios produce cumulative final energy savings of 6.0 to 18.9 exajoules and reduce CO 2 emissions by 1.0 to 2.4 gigatonnes. This analysis highlights that increasing energy efficiency is the most important policy measure for reducing the cement industry's energy and emissions intensity, given the current state of the industry and the unlikelihood of significant carbon capture and storage before 2030. In addition, policies to reduce total cement production offer the most direct way of reducing total energy consumption and CO 2 emissions. - Highlights: ► This study models output and efficiency improvements in Chinese cement industry from 2011–2030. ► Energy savings and CO 2 emission reductions estimated for 3 scenarios relative to frozen scenario. ► Results reveal cumulative final energy savings potential of 27.1–37.5 EJ and 3.2–4.4 Gt CO 2 reductions. ► Increasing efficiency is the most important policy for reducing cement energy and emissions intensity.

  17. Nuevo material cerámico diseñado específicamente para optimizar el rendimiento de los sistemas de calefacción

    Directory of Open Access Journals (Sweden)

    CLIMASTAR S.L., -

    2010-04-01

    Full Text Available This article sets out the main features of Dual Kherr®, its development and uses. Dual Kherr® is a ceramic composite based on porcelain clay. It has been specially designed to work as a storage heater and a radiant heating system. Jointly developed by the R&D departments of both companies, PAMESA and CLIMASTAR, this new material optimises the output of any heating system and it has been specially conceived to save energy. It is a great revolution, mainly due to the following: • On the one hand, Dual Kherr® incorporates ceramic to the heating business, opening a new and important market. • On the other hand, this new material adds the aesthetics proper of the ceramic material to the design of the heating systems. It even allows the development of artistic collections.

    En este artículo, se exponen el desarrollo y las aplicaciones de Dual Kherr®, composite cerámico en base de gres porcelánico especialmente diseñado para actuar como acumulador y radiante para calefacción. Desarrollado conjuntamente por los departamentos de I+D+i de las compañías PAMESA y CLIMASTAR, este nuevo material optimiza el rendimiento de cualquier sistema de calefacción y permite un mayor ahorro en consumo. Esto supone una doble revolución: • por un lado, Dual Kherr® incorpora la cerámica al sector de la climatización, abriendo de esta manera un nuevo e importante mercado • por otro lado, este nuevo material aporta la estética incomparable de la cerámica al diseño de sistemas de calefacción, permitiendo incluso el desarrollo de colecciones artísticas

  18. Effect of open-label infusion of an apoA-I-containing particle (CER-001) on RCT and artery wall thickness in patients with FHA[S

    Science.gov (United States)

    Kootte, Ruud S.; Smits, Loek P.; van der Valk, Fleur M.; Dasseux, Jean-Louis; Keyserling, Constance H.; Barbaras, Ronald; Paolini, John F.; Santos, Raul D.; van Dijk, Theo H.; Dallinga-van Thie, Geesje M.; Nederveen, Aart J.; Mulder, Willem J. M.; Hovingh, G. Kees; Kastelein, John J. P.; Groen, Albert K.; Stroes, Erik S.

    2015-01-01

    Reverse cholesterol transport (RCT) contributes to the anti-atherogenic effects of HDL. Patients with the orphan disease, familial hypoalphalipoproteinemia (FHA), are characterized by decreased tissue cholesterol removal and an increased atherogenic burden. We performed an open-label uncontrolled proof-of-concept study to evaluate the effect of infusions with a human apoA-I-containing HDL-mimetic particle (CER-001) on RCT and the arterial vessel wall in FHA. Subjects received 20 infusions of CER-001 (8 mg/kg) during 6 months. Efficacy was assessed by measuring (apo)lipoproteins, plasma-mediated cellular cholesterol efflux, fecal sterol excretion (FSE), and carotid artery wall dimension by MRI and artery wall inflammation by 18F-fluorodeoxyglucose-positron emission tomography/computed tomography scans. We included seven FHA patients: HDL-cholesterol (HDL-c), 13.8 [1.8–29.1] mg/dl; apoA-I, 28.7 [7.9–59.1] mg/dl. Following nine infusions in 1 month, apoA-I and HDL-c increased directly after infusion by 27.0 and 16.1 mg/dl (P = 0.018). CER-001 induced a 44% relative increase (P = 0.018) in in vitro cellular cholesterol efflux with a trend toward increased FSE (P = 0.068). After nine infusions of CER-001, carotid mean vessel wall area decreased compared with baseline from 25.0 to 22.8 mm2 (P = 0.043) and target-to-background ratio from 2.04 to 1.81 (P = 0.046). In FHA-subjects, CER-001 stimulates cholesterol mobilization and reduces artery wall dimension and inflammation, supporting further evaluation of CER-001 in FHA patients. PMID:25561459

  19. A real option-based model for promoting sustainable energy projects under the clean development mechanism

    International Nuclear Information System (INIS)

    Lee, Hyounkyu; Park, Taeil; Kim, Byungil; Kim, Kyeongseok; Kim, Hyoungkwan

    2013-01-01

    The clean development mechanism (CDM) provides a way of assisting sustainable development in developing countries for developed countries to reduce greenhouse gas (GHG) emissions. Despite its intended benefits, the primary CDM market decreased from US$5.8 billion in 2006 to US$1.5 billion in 2010. One of the primary reasons for the reduction of market size is that developed countries as investors have a high level of risks caused by the volatility of the market price for certified emission reductions (CERs). Another issue to be resolved is that developing countries as host countries cannot claim any right to the CERs produced on their own land. This paper presents a real option-based model for both parties (developed and developing countries) to have their fair share of profits and risks by controlling the uncertainty associated with the future value of CERs. A case study illustrated that the proposed model can effectively attract investors to CDM projects leading to mitigation of climate change. - Highlights: ► This study focused on the risks associated with the uncertainty of future CER value in CDM projects. ► A real option-based model was developed for both parties in CDM to have fair share of profit and risk. ► Key variables and boundary conditions were identified for application of real option to CDM. ► The model allowed both parties to own options, which have an identical value. ► Hydropower plant projects in Indonesia were used to illustrate the implementation of the model

  20. Achieving CO2 Emissions Reduction Goals with Energy Infrastructure Projects

    International Nuclear Information System (INIS)

    Eberlinc, M.; Medved, K.; Simic, J.

    2013-01-01

    The EU has set its short-term goals in the Europe 2020 Strategy (20% of CO 2 emissions reduction, 20% increase in energy efficiency, 20% share of renewables in final energy). The analyses show that the EU Member States in general are on the right track of achieving these goals; they are even ahead (including Slovenia). But setting long-term goals by 2050 is a tougher challenge. Achieving CO 2 emissions reduction goes hand in hand with increasing the share of renewables and strategically planning the projects, which include exploiting the potential of renewable sources of energy (e.g. hydropower). In Slovenia, the expected share of hydropower in electricity production from large HPPs in the share of renewables by 2030 is 1/3. The paper includes a presentation of a hydro power plants project on the middle Sava river in Slovenia and its specifics (influenced by the expansion of the Natura 2000 protected sites and on the other hand by the changes in the Environment Protection Law, which implements the EU Industrial Emissions Directive and the ETS Directive). Studies show the importance of the HPPs in terms of CO 2 emissions reduction. The main conclusion of the paper shows the importance of energy infrastructure projects, which contribute to on the one hand the CO 2 emissions reduction and on the other the increase of renewables.(author)

  1. Energy saving and emission reduction of China's urban district heating

    International Nuclear Information System (INIS)

    Chen, Xia; Wang, Li; Tong, Lige; Sun, Shufeng; Yue, Xianfang; Yin, Shaowu; Zheng, Lifang

    2013-01-01

    China's carbon dioxide (CO 2 ) emission ranks highest in the world. China is committed to reduce its CO 2 emission by 40% to 45% from the 2005 levels by 2020. To fulfill the target, China's CO 2 emission reduction must exceed 6995 million tons. Energy consumption and CO 2 emission of China's urban district heating (UDH) are increasing. The current policy implemented to improve UDH focuses on replacing coal with natural gas to reduce energy consumption and CO 2 emission to some extent. This paper proposes that heat pump heating (HPH) could serve as a replacement for UDH to help realize energy-saving and emission-reduction goals to a greater extent. The paper also analyzes the impact of this replacement on the heating and power generation sectors. The results show that replacing coal-based UDH with HPH decreases energy consumption and CO 2 emission by 43% in the heating sector. In the power generation sector, the efficiency of power generation at the valley electricity time increases by 0.512%, and the ratio of peak–valley difference decreases by 16.5%. The decreases in CO 2 emission from the heating and power generation sectors cumulatively account for 5.55% of China's total CO 2 emission reduction target in 2020. - Highlights: ► Replacing urban district heating with heat pump heating. ► Impact of heat pump heating on heating and power generation sectors. ► Potential of energy saving and emission reduction for heat pump heating. ► China should adjust current urban heating strategy

  2. Reflexiones sobre el futuro de la Industria Europea de la Cerámica

    Directory of Open Access Journals (Sweden)

    Criado, E.

    2007-02-01

    Full Text Available The European Union thorough the European Ceramic Industries association, CERAME-UNIE, elaborate since 2004 a sectorial diagnostic and the published draft (9-09-2006 was transcribed in the Boletin Sociedad Española Ceramica y Vidrio issue 1 of 2007. This draft is a preliminary document that consisted in an instrument to initiate the mandatory debate in order to confront the sector expectation in the conference of the Parliament an the European Union that will be held in 2008. On behalf of the importance of the Spain Ceramic industry with a turnover of 6.000 M€ in the context of 27.000 M€ of the total of the European Ceramic industries, and due to the relevance of such spanish turnover on the Gross Domestic Product, it must necessary to analyze their own future strategy.

    La Unión Europea, a través de la asociación europea de fabricantes de cerámica CERAME-UNIE, lleva elaborando desde 2004 un diagnostico del sector, cuyo borrador (26-0/9-2006 se publica en el número 1 del año 2007 del Boletín de la Sociedad Española de Cerámica y Vidrio. Este borrador es un documento muy preliminar, pero en todo caso va a permitir disponer de un instrumento para un debate necesario, que afrontará las perspectivas del sector ante la conferencia que tendrá lugar en el 2008, organizada por el Parlamento y la Comisión Europea. Dado el elevado peso de la industria cerámica española en el contexto europeo, 6.000 M€ sobre un total de 27. 000 M€, y la importancia de su aportación al Producto Interior Bruto nacional, sería conveniente que el entorno productivo aproveche la oportunidad para analizar la estrategia de futuro.

  3. Energy market reform and greenhouse gas emission reductions

    International Nuclear Information System (INIS)

    Anon.

    1999-01-01

    The report reviews micro-economic reform in the energy market and measures the impact that energy market reform is expected to have on greenhouse gas outcomes. It indicates that reform in the electricity and gas industries is delivering what was promised, an efficient market with lower energy prices and, over the longer term, will deliver a gradually reducing rate of greenhouse gas emissions per unit of energy produced. It also recognises that energy market reform has removed some barriers to the entry of less greenhouse gas intense fuels. These trends will result in reduced greenhouse gas intensity in the supply of energy and significant reductions in the growth in greenhouse gas emissions compared to what may have been expected without the reforms

  4. CO_2 emissions and energy intensity reduction allocation over provincial industrial sectors in China

    International Nuclear Information System (INIS)

    Wu, Jie; Zhu, Qingyuan; Liang, Liang

    2016-01-01

    Highlights: • DEA is used to evaluate the energy and environmental efficiency of 30 provincial industrial sector in China. • A new DEA-based model is proposed to allocate the CO_2 emissions and energy intensity reduction targets. • The context-dependent DEA is used to characterize the production plans. - Abstract: High energy consumption by the industry of developing countries has led to the problems of increasing emission of greenhouse gases (GHG) (primarily CO_2) and worsening energy shortages. To address these problems, many mitigation measures have been utilized. One major measure is to mandate fixed reductions of GHG emission and energy consumption. Therefore, it is important for each developing country to disaggregate their national reduction targets into targets for various geographical parts of the country. In this paper, we propose a DEA-based approach to allocate China’s national CO_2 emissions and energy intensity reduction targets over Chinese provincial industrial sectors. We firstly evaluate the energy and environmental efficiency of Chinese industry considering energy consumption and GHG emissions. Then, considering the necessity of mitigating GHG emission and energy consumption, we develop a context-dependent DEA technique which can better characterize the changeable production with reductions of CO_2 emission and energy intensity, to help allocate the national reduction targets over provincial industrial sectors. Our empirical study of 30 Chinese regions for the period 2005–2010 shows that the industry of China had poor energy and environmental efficiency. Considering three major geographical areas, eastern China’s industrial sector had the highest efficiency scores while in this aspect central and western China were similar to each other at a lower level. Our study shows that the most effective allocation of the national reduction target requires most of the 30 regional industrial to reduce CO_2 emission and energy intensity, while a

  5. Tendencias en el conformado de suspensiones cerámicas

    Directory of Open Access Journals (Sweden)

    Moreno, R.

    2000-10-01

    Full Text Available Colloidal processing of ceramics allows to improve the final properties of the products by reducing the number and size of defects, enhancing the reproducibility of the process. This needs on one hand an adequate knowledge of colloidal and rheological parameters that control the stability of the suspension and, on the other hand, the control of the specific parameters of each forming technique. Slip casting has been widely used in the industry due to its high versatility, the low cost and the high uniformity in the so cast bodies. However, the industrial development needs the search of new forming techniques capable to combine the advantages of casting processes (as the possibility to obtain near-net shaped parts where machining is reduced or even avoided with those of other processes (such as pressing mainly related to the reduction of the fabrication cycle and the possibility of automation. All this has favoured the development of new forming techniques where a proper manipulation of the colloidal properties of a slip makes possible to obtain near-net shaped parts. This work shows the basis of such processes and discusses the actual tendencies in colloidal forming of ceramics.

    El procesamiento coloidal de materiales cerámicos permite mejorar las propiedades finales de los productos, reduciendo el número y tamaño de los defectos, y aumentando la reproducibilidad del proceso. Esto exige, por una parte, el adecuado conocimiento de los parámetros coloidequímicos y reológicos que rigen la estabilidad de la suspensión y, por otra, el control de las variables específicas de cada proceso de conformado. La técnica de colaje se ha utilizado tradicionalmente en la industria, dada su gran versatilidad, su bajo costo y la elevada uniformidad de las piezas así obtenidas. Sin embargo, el desarrollo industrial impone la búsqueda de nuevas técnicas de conformado capaces de aunar las ventajas del colaje (como la posibilidad de obtener piezas

  6. Moab, Utah: Using Energy Data to Target Carbon Reductions from Building Energy Efficiency (City Energy: From Data to Decisions)

    Energy Technology Data Exchange (ETDEWEB)

    Strategic Priorities and Impact Analysis Team, Office of Strategic Programs

    2017-11-01

    This fact sheet "Moab, Utah: Using Energy Data to Target Carbon Reductions from Building Energy Efficiency" explains how the City of Moab used data from the U.S. Department of Energy's Cities Leading through Energy Analysis and Planning (Cities-LEAP) and the State and Local Energy Data (SLED) programs to inform its city energy planning. It is one of ten fact sheets in the "City Energy: From Data to Decisions" series.

  7. A Financing Model to Solve Financial Barriers for Implementing Green Building Projects

    Science.gov (United States)

    Lee, Baekrae; Kim, Juhyung; Kim, Jaejun

    2013-01-01

    Along with the growing interest in greenhouse gas reduction, the effect of greenhouse gas energy reduction from implementing green buildings is gaining attention. The government of the Republic of Korea has set green growth as its paradigm for national development, and there is a growing interest in energy saving for green buildings. However, green buildings may have financial barriers that have high initial construction costs and uncertainties about future project value. Under the circumstances, governmental support to attract private funding is necessary to implement green building projects. The objective of this study is to suggest a financing model for facilitating green building projects with a governmental guarantee based on Certified Emission Reduction (CER). In this model, the government provides a guarantee for the increased costs of a green building project in return for CER. And this study presents the validation of the model as well as feasibility for implementing green building project. In addition, the suggested model assumed governmental guarantees for the increased cost, but private guarantees seem to be feasible as well because of the promising value of the guarantee from CER. To do this, certification of Clean Development Mechanisms (CDMs) for green buildings must be obtained. PMID:24376379

  8. Caracterização do Resíduo Sólido Proveniente do Processo de Beneficiamento de Areia e sua Viabilidade de Uso em Cerâmica.

    OpenAIRE

    BIFF, Sergio

    2015-01-01

    O presente estudo teve como objetivo efetuar a caracterização química e física do resíduo sólido proveniente do processo de beneficiamento de areia industrial, areia esta destinada às indústrias cerâmicas, vidro e de fundição. Adicionalmente foi avaliado o potencial uso do resíduo na indústria de revestimentos cerâmicos em substituição às matérias-primas convencionalmente utilizadas na composição das massas cerâmicas. O resíduo sólido, objeto deste estudo foi gerado pelo processo de ben...

  9. Potential energy consumption reduction of automotive climate control systems

    International Nuclear Information System (INIS)

    Nielsen, Filip; Uddheim, Åsa; Dalenbäck, Jan-Olof

    2016-01-01

    Highlights: • Twenty-on energy saving measures for vehicle interior climate were evaluated. • Few single energy saving measures could reduce the energy use significantly. • The operation of the system in intermediate conditions determines the energy use. • Required heating/cooling of passenger compartment had small effect on energy use. - Abstract: In recent years fuel consumption of passenger vehicles has received increased attention by customers, the automotive industry, regulatory agencies and academia. One area which affect the fuel consumption is climate control systems. Twenty-one energy saving measures were evaluated regarding the total energy use for vehicle interior climate using simulation. Evaluated properties were heat flow into the passenger compartment, electrical and mechanical work. The simulation model included sub models of the passenger compartment, air-handling unit, Air Conditioning (AC) system, engine and engine cooling system. A real-world representative test cycle, which included tests in cold, intermediate and warm conditions, was used for evaluation. In general, few single energy saving measures could reduce the energy use significantly. The measures with most potential were increased blower efficiency with a reduction of 46% of the electrical work and increased AC-system disengage temperature with a reduction of 27% of the mechanical work. These results show that the operation of the climate control system had a large effect on the energy use, especially compared to the required heating and cooling of the passenger compartment. As a result energy saving measures need to address how heating and cooling is generated before reducing the heat flow into the passenger compartment.

  10. Microestructura y comportamiento mecánico a altas temperaturas de cerámicas biomorficas de carburo de silicio

    Directory of Open Access Journals (Sweden)

    Martínez-Fernández, J.

    2001-04-01

    Full Text Available Environment conscious ceramics (ecoceramics are a new class of ceramic materials fabricated from natural wood (a renewable source. The affordable, net shape ceramics are fabricated by pyrolysis and molten silicon infiltration of wood preforms. The resulting materials have complex microstructure and multifunctional properties. The microstructure before and after high temperature plastic deformation was studied by scanning electron microscopy. These ceramics present regions of silicon and silicon carbide that follow the fibrous microstructure of the wood selected, resulting in a structure that resembles a continuos fiber composite. This structure results in very good mechanical properties as the evolutionary process has perfected it.

    Las cerámicas respetuosas con el medio ambiente (ecocerámicas son una nueva clase de materiales cerámicos fabricados a partir de madera natural (un recurso renovable. Estas cerámicas se fabrican mediante la pirólisis de la preforma de madera e infiltración de silicio líquido en esta, proceso de bajo coste y con poco cambio de forma. El material resultante tiene una microestructura compleja y propiedades multifuncionales. La microestructura antes y después de la deformación plástica a alta temperatura se estudió mediante microscopía electrónica de barrido. Estas cerámicas presentan regiones de silicio y de carburo de silicio que mantienen la microestructura fibrosa de la madera seleccionada, similar a la de un material compuesto de fibra continua. Esta estructura ha resultado poseer unas muy buenas propiedades mecánicas a la compresión en caliente, en la dirección de las fibras, ya que el proceso evolutivo la ha perfeccionado.

  11. Análise quantitativa e qualitativa da degradação das fachadas com revestimento cerâmico

    Directory of Open Access Journals (Sweden)

    C. P. Pacheco

    Full Text Available Resumo Este artigo teve por objetivo mostrar a aplicação de uma metodologia para inspeção de fachadas em edifícios, baseada em modelos pré-estruturados. Foram vistoriados três prédios com revestimento externo em cerâmica, totalizando 4958 m2 de área de fachada inspecionada. Mediante a inspeção visual, realizou-se o levantamento das áreas das manifestações patológicas por região e orientação cardeal da fachada e definiram-se os níveis de degradação. Foram realizados testes de percussão nas fachadas e ensaios de absorção de água e expansão por umidade nas placas cerâmicas. Como complemento, levantaram-se as informações referentes aos edifícios por meio de entrevistas e análises de projetos. Foi elaborada a matriz de correlação anomalias versus causas, que permitiu avaliar a origem dos danos. As anomalias com maior ocorrência nos edifícios foram as manchas e sujeiras e a deterioração nos rejuntes. Constatou-se a influência da cor das cerâmicas e da posição das fachadas no desplacamento. Com base nos ensaios de absorção de água, verificou-se que dois edifícios apresentaram cerâmicas com alto índice de absorção e a análise das regiões de fachadas mostrou que a ausência de juntas foi uma das causas do desplacamento em paredes contínuas e na transição entre pavimentos.

  12. Arcillas cerámicas: una revisión de sus distintos tipos, significados y aplicaciones

    Directory of Open Access Journals (Sweden)

    Díaz Rodríguez, L. A.

    2002-10-01

    Full Text Available Clay is a word which has many meanings depending on the use to which it is put. However, it is in the ceramic field where the application of clay began and so it is here where this work will try to find a definition and establish a classification based on ceramic-geological criteria. The different kinds of clays found in Nature and their mineralogy are discussed in detail. Their properties and main uses are pointed out and finally the geographical and geological distribution of Spanish clays which have ceramic applications is presented.

    La palabra arcilla posee un significado muy distinto según sea el ámbito industrial o científico de su utilización. Aunque hoy en día las aplicaciones de las materias primas arcillosas son muy variadas, es en el ámbito cerámico donde reside el primer origen de su consumo. Por tanto, es aquí donde se ha centrado este trabajo para exponer, en primer lugar, una definición del concepto arcilla y, con posterioridad, establecer una clasificación de las arcillas según criterios cerámico-geológicos. Se describen los distintos tipos existentes en la Naturaleza y se hace mención a su mineralogía, propiedades en general y usos principales. Finalmente, se exponen las arcillas españolas de aplicación cerámica, y su distribución dentro del territorio español.

  13. Estimating the Value of Price Risk Reduction in Energy Efficiency Investments in Buildings

    Directory of Open Access Journals (Sweden)

    Pekka Tuominen

    2017-10-01

    Full Text Available This paper presents a method for calculating the value of price risk reduction to a consumer that can be achieved with investments in energy efficiency. The value of price risk reduction is discussed to some length in general terms in the literature reviewed but, so far, no methodology for calculating the value has been presented. Here we suggest such a method. The problem of valuating price risk reduction is approached using a variation of the Black–Scholes model by considering a hypothetical financial instrument that a consumer would purchase to insure herself against unexpected price hikes. This hypothetical instrument is then compared with an actual energy efficiency investment that reaches the same level of price risk reduction. To demonstrate the usability of the method, case examples are calculated for typical single-family houses in Finland. The results show that the price risk entailed in household energy consumption can be reduced by a meaningful amount with energy efficiency investments, and that the monetary value of this reduction can be calculated. It is argued that this often-overlooked benefit of energy efficiency investments merits more consideration in future studies.

  14. Beam energy reduction in an acceleration gap

    International Nuclear Information System (INIS)

    Rhee, M.J.

    1990-01-01

    The subject of high-current accelerators has recently attracted considerable attention. The high-current beam accompanies a substantial amount of field energy in the space between the beam and the drift tube wall, as it propagates through a conducting drift tube of accelerator system. While such a beam is being accelerated in a gap, this field energy is subject to leak through the opening of the gap. The amount of energy lost in the gap is replenished by the beam at the expense of its kinetic energy. In this paper, the authors present a simple analysis of field energy loss in an acceleration gap for a relativistic beam for which beam particle velocity equals to c. It is found that the energy loss, which in turn reduces the beam kinetic energy, is ΔV = IZ 0 : the beam current times the characteristic impedance of the acceleration gap. As a result, the apparent acceleration voltage of the gap is reduced from the applied voltage by ΔV. This effect, especially for generation of high-current beam accelerated by a multigap accelerator, appears to be an important design consideration. The energy reduction mechanism and a few examples are presented

  15. Civil Service Workforce Market Supply and the Effect on Cost Estimating Relationship (CERS) that May Effect the Productivity Factors for Future NASA Missions

    Science.gov (United States)

    Sterk, Steve; Chesley, Stephan

    2008-01-01

    The upcoming retirement of the Baby Boomers will leave a workforce age gap between the younger generation (the future NASA decision makers) and the gray beards. This paper will reflect on the average age of the workforce across NASA Centers, the Aerospace Industry and other Government Agencies, like DoD. This paper will dig into Productivity and Realization Factors and how they get applied to bi-monthly (payroll) data for true full-time equivalent (FTE) calculations that could be used at each of the NASA Centers and other business systems that are on the forefront in being implemented. This paper offers some comparative costs analysis/solutions, from simple FTE cost-estimating relationships (CERs) versus CERs for monthly time-phasing activities for small research projects that start and get completed within a government fiscal year. This paper will present the results of a parametric study investigating the cost-effectiveness of alternative performance-based CERs and how they get applied into the Center's forward pricing rate proposals (FPRP). True CERs based on the relationship of a younger aged workforce will have some effects on labor rates used in both commercial cost models and other internal home-grown cost models which may impact the productivity factors for future NASA missions.

  16. Micromecanizado de materiales cerámicos mediante láser de femtosegundo

    Directory of Open Access Journals (Sweden)

    Moreno, P.

    2005-02-01

    Full Text Available In this work, we present the application of ultrashort and intense laser pulses (110 fs @ 1 kHz; up to 1.1 mJ/pulse to the micromachining of ceramics, specifically RubalitTM708S, a material based on alumina and widely used as a substrate in microelectronics. The mechanism for removing material is the so called direct ablation. It differs from thermal ablation of conventional lasers in the practically total absence of thermal effects which produces a remarkable increase of quality and precision of the machining. By means of an optical diffraction-based technique we find out the energy density threshold to work in the direct ablation regime. Adjusting the energy per pulse as well as the number of pulses, we are able to drill holes of the desired diameter and depth. In addition, processing is developed in air. We also demonstrate that high quality fs-laser micromachining is suitable for every ceramic, whatever the mechanical properties, with similar working parameters. In order to show this point, we have also processed sintered SiN, a material of wide-ranging interest in industry.

    En este trabajo presentamos la aplicación de pulsos láser ultracortos (110 fs @ 1 kHz; hasta 1.1 mJ/pulso al micromecanizado de materiales cerámicos, en concreto RubalitTM708S, un material compuesto principalmente de alúmina y empleado en la industria microelectrónica. El mecanismo de eliminación de material es la ablación directa, que difiere de la ablación térmica empleada por los láseres convencionales en la prácticamente total ausencia de efectos térmicos, lo que redunda en un aumento significativo de la precisión y calidad del mecanizado. Mediante técnicas basadas en la difracción óptica determinamos el umbral de energía necesario para que tenga lugar el proceso de ablación directa. Con ese dato y regulando la energía por pulso y el número de pulsos somos capaces de producir mecanizados del diámetro y profundidad deseados. Además, el

  17. Portland blended cements: demolition ceramic waste management; Cementos Portland con adiciones: manejo de residuos cerámicos de demolición.

    Energy Technology Data Exchange (ETDEWEB)

    Trezza, M.A.; Zito, S.; Tironi, A.; Irassar, E.F.; Rahhal, V.F.

    2017-07-01

    Demolition ceramic wastes (DCWs) were investigated in order to determine their potential use as supplementary cementitious materials in Portland Blended Cements (PBCs). For this purpose, three ceramic wastes were investigated. After characterization of the materials used, the effect of ceramic waste replacement (8, 24 and 40% by mass) was analyzed. Pozzolanic activity, hydration progress, workability and compressive strength were determined at 2, 7 and 28 days. The results showed that the ground wastes behave as filler at an early age, but as hydration progresses, the pozzolanic activity of ceramic waste contributes to the strength requirement. [Spanish] Se estudiaron residuos cerámicos de demolición (DCWs) a fin de determinar su potencial uso como materiales cementicios suplementarios en cementos mezcla (PBC). Para este propósito, se investigaron tres residuos cerámicos. Luego de la caracterización de los materiales a utilizar, se analizó el efecto del reemplazo por residuos cerámico (8, 24 y 40% en peso). Se estudió la actividad puzolánica, el progreso de la hidratación, la trabajabilidad y la resistencia a compresión a 2, 7 y 28 días. Los resultados mostraron que los residuos molidos se comportaron como fillers a edades tempranas, pero con el progreso de la hidratación, la actividad puzolánica de los residuos cerámicos contribuye a los requerimientos de resistencia.

  18. Challenges in using electronic health record data for CER: experience of 4 learning organizations and solutions applied.

    Science.gov (United States)

    Bayley, K Bruce; Belnap, Tom; Savitz, Lucy; Masica, Andrew L; Shah, Nilay; Fleming, Neil S

    2013-08-01

    To document the strengths and challenges of using electronic health records (EHRs) for comparative effectiveness research (CER). A replicated case study of comparative effectiveness in hypertension treatment was conducted across 4 health systems, with instructions to extract data and document problems encountered using a specified list of required data elements. Researchers at each health system documented successes and challenges, and suggested solutions for addressing challenges. Data challenges fell into 5 categories: missing data, erroneous data, uninterpretable data, inconsistencies among providers and over time, and data stored in noncoded text notes. Suggested strategies to address these issues include data validation steps, use of surrogate markers, natural language processing, and statistical techniques. A number of EHR issues can hamper the extraction of valid data for cross-health system comparative effectiveness studies. Our case example cautions against a blind reliance on EHR data as a single definitive data source. Nevertheless, EHR data are superior to administrative or claims data alone, and are cheaper and timelier than clinical trials or manual chart reviews. All 4 participating health systems are pursuing pathways to more effectively use EHR data for CER.A partnership between clinicians, researchers, and information technology specialists is encouraged as a way to capitalize on the wealth of information contained in the EHR. Future developments in both technology and care delivery hold promise for improvement in the ability to use EHR data for CER.

  19. Application research on big data in energy conservation and emission reduction of transportation industry

    Science.gov (United States)

    Bai, Bingdong; Chen, Jing; Wang, Mei; Yao, Jingjing

    2017-06-01

    In the context of big data age, the energy conservation and emission reduction of transportation is a natural big data industry. The planning, management, decision-making of energy conservation and emission reduction of transportation and other aspects should be supported by the analysis and forecasting of large amounts of data. Now, with the development of information technology, such as intelligent city, sensor road and so on, information collection technology in the direction of the Internet of things gradually become popular. The 3G/4G network transmission technology develop rapidly, and a large number of energy conservation and emission reduction of transportation data is growing into a series with different ways. The government not only should be able to make good use of big data to solve the problem of energy conservation and emission reduction of transportation, but also to explore and use a large amount of data behind the hidden value. Based on the analysis of the basic characteristics and application technology of energy conservation and emission reduction of transportation data, this paper carries out its application research in energy conservation and emission reduction of transportation industry, so as to provide theoretical basis and reference value for low carbon management.

  20. Biomass to energy : GHG reduction quantification protocols and case study

    Energy Technology Data Exchange (ETDEWEB)

    Reusing, G.; Taylor, C. [Conestoga - Rovers and Associates, Waterloo, ON (Canada); Nolan, W. [Liberty Energy, Hamilton, ON (Canada); Kerr, G. [Index Energy, Ajax, ON (Canada)

    2009-07-01

    With the growing concerns over greenhouses gases and their contribution to climate change, it is necessary to find ways of reducing environmental impacts by diversifying energy sources to include non-fossil fuel energy sources. Among the fastest growing green energy sources is energy from waste facilities that use biomass that would otherwise be landfilled or stockpiled. The quantification of greenhouse gas reductions through the use of biomass to energy systems can be calculated using various protocols and methodologies. This paper described each of these methodologies and presented a case study comparing some of these quantification methodologies. A summary and comparison of biomass to energy greenhouse gas reduction protocols in use or under development by the United Nations, the European Union, the Province of Alberta and Environment Canada was presented. It was concluded that regulatory, environmental pressures, and public policy will continue to impact the practices associated with biomass processing or landfill operations, such as composting, or in the case of landfills, gas collection systems, thus reducing the amount of potential credit available for biomass to energy facility offset projects. 10 refs., 2 tabs., 6 figs.

  1. Biomass to energy : GHG reduction quantification protocols and case study

    International Nuclear Information System (INIS)

    Reusing, G.; Taylor, C.; Nolan, W.; Kerr, G.

    2009-01-01

    With the growing concerns over greenhouses gases and their contribution to climate change, it is necessary to find ways of reducing environmental impacts by diversifying energy sources to include non-fossil fuel energy sources. Among the fastest growing green energy sources is energy from waste facilities that use biomass that would otherwise be landfilled or stockpiled. The quantification of greenhouse gas reductions through the use of biomass to energy systems can be calculated using various protocols and methodologies. This paper described each of these methodologies and presented a case study comparing some of these quantification methodologies. A summary and comparison of biomass to energy greenhouse gas reduction protocols in use or under development by the United Nations, the European Union, the Province of Alberta and Environment Canada was presented. It was concluded that regulatory, environmental pressures, and public policy will continue to impact the practices associated with biomass processing or landfill operations, such as composting, or in the case of landfills, gas collection systems, thus reducing the amount of potential credit available for biomass to energy facility offset projects. 10 refs., 2 tabs., 6 figs

  2. Processamento de telhas cerâmicas por compactação de pós e queima em forno a rolo

    OpenAIRE

    Neckel Junior, Lourenço

    2008-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnologico. Programa de Pós-Graduação em Ciência e Engenharia de Materiais O presente trabalho apresenta o desenvolvimento do processamento de telhas cerâmicas por compactação de pós e queima em forno a rolos. O trabalho está dividido em etapas: o estudo laboratorial de duas argilas - já previamente utilizadas em indústrias cerâmicas - buscando selecionar a argila e as condições otimizadas de processamento, onde foi i...

  3. Descolagem de um revestimento cerâmico em fachada

    OpenAIRE

    Pinheiro, Daniel da Silva; Bragança, L.; Aguiar, J. L. Barroso de

    2006-01-01

    A capacidade de um revestimento cerâmico resistir à descolagem depende da correcta selecção do produto de colagem e do método de colagem. Estes devem ser adequados à intensidade das acções previstas, ao tipo de utilização do revestimento, às características do suporte e ao tipo de revestimento. Uma cuidada concepção do revestimento e a selecção do produto de colagem adequado para cada situação não garante por si só a eficiência da colagem sendo necessário que essas precauções sejam acompan...

  4. Concentrated energy addition for active drag reduction in hypersonic flow regime

    Science.gov (United States)

    Ashwin Ganesh, M.; John, Bibin

    2018-01-01

    Numerical optimization of hypersonic drag reduction technique based on concentrated energy addition is presented in this study. A reduction in wave drag is realized through concentrated energy addition in the hypersonic flowfield upstream of the blunt body. For the exhaustive optimization presented in this study, an in-house high precision inviscid flow solver has been developed. Studies focused on the identification of "optimum energy addition location" have revealed the existence of multiple minimum drag points. The wave drag coefficient is observed to drop from 0.85 to 0.45 when 50 Watts of energy is added to an energy bubble of 1 mm radius located at 74.7 mm upstream of the stagnation point. A direct proportionality has been identified between energy bubble size and wave drag coefficient. Dependence of drag coefficient on the upstream added energy magnitude is also revealed. Of the observed multiple minimum drag points, the energy deposition point (EDP) that offers minimum wave drag just after a sharp drop in drag is proposed as the most optimum energy addition location.

  5. Caracterización química de la cerámica arqueológica de Cotahuasi mediante análisis por activación neutrónica

    OpenAIRE

    Bedregal, Patricia; Mendoza, Pablo; Ubillús, Marco; Montoya, Eduardo

    2010-01-01

    Se ha determinado las concentraciones de As, Ba, Ce, Co, Cr, Cs, Eu, Fe, Hf, La, Na, Rb, Sb, Sc, Sm, Th, Yb, en 121 fragmentos de cerámicos arqueológicos encontrados en el valle de Cotahuasi, mediante análisis por activación neutrónica instrumental, según el método k-subcero. Se ha comparado los resultados con la composición química elemental de la cerámica Tiwanaku y la cerámica Wari de Ayacucho y Cusco, encontrándose que los grupos de Ayacucho, Cotahuasi, Cusco y Tiwanaku se encuentran sepa...

  6. Green-house gasses reduction in the energy sector

    International Nuclear Information System (INIS)

    Todorovski, Mirko; Markovska, Natasha; Boshevski, Tome; Pop-Jordanov, Jordan

    2004-01-01

    As a follow-up activity of the Macedonian First National Communication under the UNFC-CC, Technology Needs Assessment is conducted, evaluating by GACMO model the measures related mainly to energy efficient and renewable energy technologies. An abatement cost curve is constructed and used as an illustrative tool for recognizing priorities in GHG abatement policy. About half of the measures are shown to be of 'win-win' type, reducing 3% of the baseline GHG emissions, while the total reduction which can be achieved by all measures amounts to 20%. For each measure difficulties for implementation are identified, being the highest for the measures with largest GHG abatement potential. Generally, these difficulties include lack of financing and low prospects for attracting foreign investments as well as legislative and administrative barriers. It must be recognized that climate change issues could not be of high priority in a country with economy in transition. Consequently, in our case the main issues which should be integrated within the framework of ongoing transition reforms, in an effort to implement a GHG emission reduction policy, would be: institutional capacity building, attracting foreign investment, emphasis on energy efficiency and considering the switch toward less carbon intensive fuels. (Author)

  7. Planossolos e Gleissolos Utilizados na Fabricação de Cerâmica Artesanal no Semiárido de Minas Gerais

    Directory of Open Access Journals (Sweden)

    Diana Ferreira de Freitas

    2015-06-01

    Full Text Available O conhecimento etnopedológico tem fornecido informações importantes sobre o modo de vida das populações rurais a respeito de suas tradições ancestrais, como a arte de elaborar peças artesanais a partir do barro advindo de solos com características próprias a esse uso. O objetivo deste trabalho foi avaliar física, química e mineralogicamente Planossolos e Gleissolos explorados para a produção de artefatos de cerâmica artesanal em Minas Gerais. Nos barreiros, foram coletados dois perfis de Planossolos (P1 e P2 e um Gleissolo (P3 usados como matéria-prima na produção artesanal de cerâmica. Foram realizadas análises físicas e químicas, limites de liquidez (LL e plasticidade (LP, índice de plasticidade (IP e de atividade coloidal (IA, além da mineralogia da fração argila. Os horizontes selecionados pelos ceramistas para a fabricação de cerâmica artesanal (BA, Btg e BCg, do P1; Btg1 e Btg2, do P2; e C2g e C3g, do P3 apresentaram os maiores teores de argila e silte, IP e IA, importantes para a qualidade final da cerâmica. O horizonte Cg do perfil P1 possui potencial de ser utilizado para a produção artesanal, em virtude do seu IP, superior aos dos horizontes normalmente usados, além dos teores de argila, silte e areia fina e suas características mineralógicas. A proporção ideal das frações areia, silte e argila e a porcentagem de matéria orgânica na definição de um bom material para cerâmica são difíceis de estabelecer e variam principalmente em razão de aspectos quantitativos e qualitativos da argila nos solos.

  8. Caracterización cerámica de los sedimentos de la Albufera de Valencia

    Directory of Open Access Journals (Sweden)

    Vicente, M.

    2003-06-01

    Full Text Available The Albufera is recognised as Natural Park by Generalitat Valenciana decree of 8´th July 1989 and is listed on the wet areas of international importance of the Ramsar Conference since 8´th May 1990. Batimetry studies show the gradual full up of the lake. If the stuffing and pollution process persist, lamentably, in order to preserve the lake identity it will be necessary to extract the sediments which must be environmental adequately managed. In this study the ceramic characteristics of the Albufera of Valencia sediments have been analysed in order to know the possibility of their use as ceramic raw material or as additive to ceramic stoneware of the valencian tile industry.

    El lago de la Albufera es Parque Natural por decreto de 8 de Julio de 1989 de la Generalitat Valenciana y está desde el 8 de Mayo de 1990 en el listado de Zonas Húmedas de importancia internacional de la Conferencia de Ramsar. Los estudios de batimetría del lago indican que el lago continúa su proceso lento de colmatación, Si el proceso de colmatación y contaminación persevera o se inducen severas contaminaciones locales por vertidos, es posible que lamentablemente, para preservar la identidad del sistema, sea necesario dragar el lago de forma selectiva y cuidadosa siendo necesario dar un fin último a los fangos obtenidos. En este estudio se analizan las características de los sedimentos de la Albufera de Valencia desde el punto de vista cerámico, con el fin de Conocer las posibles utilizaciones de los mismos para la producción de algún tipo de cerámica o como componentes de adición a pastas cerámicas de la industria azulejera Valenciana.

  9. Simulación y optimización de un horno cerámico monocapa

    Directory of Open Access Journals (Sweden)

    Uche, J.

    2001-10-01

    Full Text Available Mathematical model of a single-deck roller kiln, developing the complex heat transfer modes acting inside the kiln, is made using a computer program. Design parameters, as well as types of tiles and gas consumption can be introduced in the program, in order to study the parametric optimisation of the model. Global results of the simulations have a good agreement with the data obtained from the ceramic industries.

    La modelización matemática de un horno cerámico monocapa de rodillos, desarrollando los complejos modos de transmisión de calor existentes, se ha realizado con la ayuda de un programa informático. Con el desarrollo de diferentes parámetros de diseño, así como diferentes pastas cerámicas y diferentes composiciones de gas pueden ser introducidas en dicho programa, para estudiar la correspondiente optimización paramétrica del horno. Los resultados globales de las simulaciones están en acuerdo con los datos de consumo específicos aportados por la industria azulejera.

  10. Civil Service Workforce Market Supply and the Effect on the Cost Estimating Relationships (CERs) that may effect the Productivity Factors for Future NASA Missions

    Science.gov (United States)

    Sterk, Steve; Chesley, Stephen

    2008-01-01

    The upcoming retirement of the Baby Boomers on the horizon will leave a performance gap between younger generation (the future NASA decision makers) and the gray beards. This paper will reflect on the average age of workforce across NASA Centers, the Aerospace Industry and other Government Agencies, like DoD. This papers will dig into Productivity and Realization Factors and how they get applied to bimonthly (payroll data) for true FTE calculations that could be used at each of the NASA Centers and other business systems that are on the forefront in being implemented. This paper offers some comparative costs solutions, from simple - full time equivalent (FTE) cost estimating relationships CERs, to complex - CERs for monthly time-phasing activities for small research projects that start and get completed within a government fiscal year. This paper will present the results of a parametric study investigating the cost-effectiveness of different alternatives performance based cost estimating relationships (CERs) and how they get applied into the Center s forward pricing rate proposals (FPRP). True CERs based on the relationship of a younger aged workforce will have some effects on labor rates used in both commercial cost models and internal home-grown cost models which may impact the productivity factors for future NASA missions.

  11. Carbon footprint reductions via grid energy storage systems

    Energy Technology Data Exchange (ETDEWEB)

    Hale, Trevor S. [Naval Facilities Engineering Service Center, 1100 23rd Avenue, Port Huenem, CA 93043 (United States); Department of Management, Marketing, and Business Administration, University of Houston - Downtown, Houston, Texas (United States); Weeks, Kelly [Department of Maritime Administration, Texas A and M University at Galveston, Galveston, TX 77553 (United States); Tucker, Coleman [Department of Management, Marketing, and Business Administration, University of Houston - Downtown, Houston, Texas 77002 (United States)

    2011-07-01

    This effort presents a framework for reducing carbon emissions through the use of large-scale grid-energy-storage (GES) systems. The specific questions under investigation herein are as follows: Is it economically sound to invest in a GES system and is the system at least carbon footprint neutral? This research will show the answer to both questions is in the affirmative. Scilicet, when utilized judiciously, grid energy storage systems can be both net present value positive as well as be total carbon footprint negative. The significant contribution herein is a necessary and sufficient condition for achieving carbon footprint reductions via grid energy storage systems.

  12. Avaliação de sistemas gelificantes para a produção de cerâmicas porosas através da técnica "gelcasting" de espumas

    Directory of Open Access Journals (Sweden)

    Ortega F. S.

    2000-01-01

    Full Text Available A associação da técnica "gelcasting" com o processo de aeração de suspensões cerâmicas permitiu o desenvolvimento de uma nova classe de espumas cerâmicas com propriedades sem precedentes entre as cerâmicas porosas. Um dos pontos mais importantes deste processo é a reação de gelificação, a qual enrijece a suspensão após a produção de espuma. Recentemente, alguns sistemas de monômeros tais como acrilato de amônio, hidroximetil-acrilamida, ácido metacrílico, metacrilamida e metileno-bisacrilamida foram descritos na literatura como agentes capazes de gelificar suspensões cerâmicas. Neste trabalho, estes sistemas foram estudados considerando critérios exigidos no processamento de espumas cerâmicas, como tempo de reação, interferência sobre o mecanismo de dispersão e comportamento reológico da suspensão, influência sobre o volume de espuma produzido, e resistência mecânica a verde dos corpos obtidos. Estudou-se também um sistema alternativo, baseado na formação de ligações cruzadas entre moléculas de álcool polivinílico (PVAl, o qual, ao contrário dos demais sistemas, não é inibido pela presença de oxigênio. Os resultados permitem uma maior clareza na seleção de sistemas gelificantes visando a produção de espumas cerâmicas através de gelcasting.

  13. Nuclear energy. Choice for GHG emission reduction and sustainable energy development in China

    International Nuclear Information System (INIS)

    Zhang Rui; Zou Lin; Wang Yongping

    2007-01-01

    In this paper, the sustainability of China's energy development and the major challenges in four energy priorities are discussed by establishing and applying of Indicators of Sustainable Energy Development (ISED) with consideration of nuclear power as one viable option. On this basis, China's Energy Strategy to 2020 is discussed in detail. On the other hand, the crucial role that nuclear energy will play in the fields of emission reduction and climate change is discussed by analyzing illustrative models under different energy development scenarios. An assessment on what could look like in a fast developing country like China when an equivalent fund was invested in five different energy options of hydro-power, coal-fired power, nuclear power, wind power and gas-fired power would be presented with a discussion about possible future international climate protection regimes and the methodologies to evaluate the potential roles of those energy options, especially, the nuclear energy. (author)

  14. Detención fotoacústica de transiciones de fase en cerámicas ferroeléctricas

    Directory of Open Access Journals (Sweden)

    Castañeda Guzmán, R.

    1999-10-01

    Full Text Available Phase transition on ferroelectric ceramics were detected by photoacoustic laser technique which allows the measurement of the Curie temperature and ferro-paraelectric transitions. The photoacoustic signal produced by low energy laser pulses using a piezoelectric transducer attached to the sample by a glass or quartz rod is shown. The developed technique requires nor signal amplification neither special preparation of the sample and have an excellent signal to noise ratio. In order to validate this technique it was applied to the measurement of Curie temperature of the PbSmTiO3 and Pb(MgNbTiO3 ceramics. These results were compared with those obtained by DTA, DMA and dielectric permittivity.

    Se presenta una técnica fotoacústica de láser pulsado para detectar las transiciones de fase en cerámicas ferroeléctricas, determinando la temperatura de Curie y el cambio de estructura ferro-paraeléctrico. Se muestran los cambios producidos en las señales fotoacústicas generadas por láser pulsado de baja energía (< 200 μJ, utilizando para la detección un sensor piezoeléctrico pegado a la muestra por medio de una varilla de vidrio o cuarzo. La técnica desarrollada no requiere amplificación de la señal, ni preparación especial de la muestra y presenta una relación señal a ruido excelente. Para demostrar la validez de la técnica se aplicó al estudio de la determinación de la temperatura de Curie de las cerámicas: PbSmTiO3 y Pb(MgNbTiO3. Los resultados se comparan con los obtenidos por otras técnicas como son DTA, DMA y permitividad dieléctrica.

  15. Caracterização tecnológica de cerâmica branca com adição de ossos bovinos

    Directory of Open Access Journals (Sweden)

    Karoline de Lourdes Monteiro Guimarães

    2015-07-01

    Full Text Available O descarte de resíduos sólidos é visto como um problema ambiental. À medida em que as cidades crescem e os processos produtivos avançam, é necessário buscar um destino adequado para o descarte ou outras alternativas, como o reaproveitamento em outros processos. É o caso dos ossos bovinos, que apresentam propriedades interessantes, podendo ser reaproveitados e incorporação a outros materiais, como na produção cerâmica. A adição de resíduos à massa cerâmica pode agregar benefícios ambientais, estéticos, econômicos e funcionais. Por isso, neste trabalho foi realizada uma análise das propriedades tecnológicas da cerâmica com adição de ossos bovinos. Os resultados mostram que a composição com 30% de resíduos apresentou os melhores resultados, seguidos das misturas com 35% e 55% de ossos. Conforme características, este material é indicado para uso em objetos planos e em utilitários domésticos, sobretudo quando a cor branca for inerente ao produto.

  16. Towards Energy Demand Reduction in Social Housing Buildings: Envelope System Optimization Strategies

    Directory of Open Access Journals (Sweden)

    Paula M. Esquivias

    2012-07-01

    Full Text Available This work evaluates the potential for the reduction of energy demand in residential buildings by acting on the exterior envelope, both in newly constructed buildings and in the retrofitting of existing stock. It focuses on analysing social housing buildings in Mediterranean areas and on quantifying the scope of that reduction in the application of different envelope design strategies, with the purpose of prioritizing their application based on their energy efficiency. The analyses and quantifications were made by means of the generation of energy models with the TRNSYS tool for simple or combined solutions, identifying possible potentials for reduction of the energy demand from 20% to 25%, basically by acting on the windows. The case study was a newly built social housing building of a closed block type located in Seville (Spain. Its constructive techniques and the insulation level of its envelope are standardized for current buildings widespread across Mediterranean Europe.

  17. Innovadoras soluciones digitales para generar las nuevas tendencias de futuro en el sector cerámico

    Directory of Open Access Journals (Sweden)

    Torrecid, Grupo

    2013-04-01

    Full Text Available This technical note contains the most significant aspects of the work “Innovative digital solutions to create the new future trends in the ceramic industry” in which the Group Torrecid won the “Alfa de Oro 2012” given by the Spanish Society of Ceramics and Glass. To achieve the stated objectives to work in different fields of activity for each specific glaze and ink has been necessary, comprising, among other, aspects such as the development of special frits, selecting the most suitable solvents or optimizing the compositions to ensure that the inks have appropriate behaviour in the printing process and met all the requirements of stability and quality that the ceramic industry demand.En la presente nota técnica se recoge los aspectos más significativos del trabajo “Innovadoras soluciones digitales para generar las nuevas tendencias de futuro en el sector cerámico” por el que el Grupo Torrecid obtuvo el Premio Alfa de Oro 2013 otorgado por la Sociedad Española de Cerámica y Vidrio. Para conseguir los objetivos planteados ha sido necesario trabajar en diferentes campos de actuación para cada esmalte y tinta en concreto, abarcando, entre otros, aspectos como el desarrollo de fritas especiales, la selección de los disolventes más adecuados o la optimización de las composiciones para conseguir que las tintas tuvieran un comportamiento adecuado en el proceso de impresión y cumplieran todos los requisitos de estabilidad y calidad que el sector cerámico demanda.

  18. Drag Reduction by Laser-Plasma Energy Addition in Hypersonic Flow

    International Nuclear Information System (INIS)

    Oliveira, A. C.; Minucci, M. A. S.; Toro, P. G. P.; Chanes, J. B. Jr; Myrabo, L. N.

    2008-01-01

    An experimental study was conducted to investigate the drag reduction by laser-plasma energy addition in a low density Mach 7 hypersonic flow. The experiments were conducted in a shock tunnel and the optical beam of a high power pulsed CO 2 TEA laser operating with 7 J of energy and 30 MW peak power was focused to generate the plasma upstream of a hemispherical model installed in the tunnel test section. The non-intrusive schlieren optical technique was used to visualize the effects of the energy addition to hypersonic flow, from the plasma generation until the mitigation of the shock wave profile over the model surface. Aside the optical technique, a piezoelectric pressure transducer was used to measure the impact pressure at stagnation point of the hemispherical model and the pressure reduction could be observed

  19. Residuo cerámico útil para la elaboración de cementos, procedimiento de obtención y cementos que lo comprende

    OpenAIRE

    Sánchez de Rojas, María Isabel; Frías, Moisés; Asensio, Eloy; Medina Martínez, César

    2013-01-01

    La presente invención describe un residuo cerámico obtenido a partir de residuos de construcción y demolición como componente puzolánico de cementos. Se presenta además un método de obtención de estos residuos cerámicos y otro procedimiento de fabricación de cementos utilizando estos residuos. Este tipo de residuos, son recogidos en plantas de reciclado, donde se realiza su gestión, con esta invención se podría facilitar una posible salida comercial....

  20. The polyketide components of waxes and the Cer-cqu gene cluster encoding a novel polyketide synthase, the β-diketone synthase, DKS

    DEFF Research Database (Denmark)

    von Wettstein, Penny

    2017-01-01

    The primary function of the outermost, lipophilic layer of plant aerial surfaces, called the cuticle, is preventing non-stomatal water loss. Its exterior surface is often decorated with wax crystals, imparting a blue-grey color. Identification of the barley Cer-c, -q and -u genes forming the 101 kb...... Cer-cqu gene cluster encoding a novel polyketide synthase-the β-diketone synthase (DKS), a lipase/carboxyl transferase, and a P450 hydroxylase, respectively, establishes a new, major pathway for the synthesis of plant waxes. The major product is a β-diketone (14,16-hentriacontane) aliphatic that forms...

  1. Comportamento de blocos cerâmicos estruturais produzidos a partir da mistura de lama vermelha e argila

    Directory of Open Access Journals (Sweden)

    Alcebíades Negrão Macêdo

    Full Text Available A utilização de novas técnicas de aproveitamento de resíduos tem-se tornado cada vez mais importante na construção civil, principalmente quando se trata da utilização de resíduos de outros segmentos industriais e da redução de consumo de matérias-primas naturais. O objetivo deste estudo foi avaliar a utilização da lama vermelha, resíduo proveniente da produção de alumina metalúrgica, na produção de blocos cerâmicos vazados estruturais. A produção dos blocos foi realizada em uma indústria cerâmica, a partir de uma mistura de 60% de lama vermelha (LV e de 40% de argila. Após a produção dos blocos, realizaram-se ensaios de acordo com as normas técnicas, tais como absorção de água e compressão axial simples. A partir da análise dos resultados, observou-se que os blocos estruturais produzidos a partir da mistura de LV e argila atenderam aos parâmetros normativos quanto ao índice de absorção de água e de resistência à compressão, e que as resistências médias e características desses blocos foram superiores às dos blocos cerâmicos de referência.

  2. Progress of energy reduction in the Dutch non-profit housing sector

    NARCIS (Netherlands)

    Visscher, H.J.; Filippidou, F.; Nieboer, N.E.T.

    2015-01-01

    The European Union formulated high ambitions of energy reductions to be realised in the built environment. The existing housing stock covers a major share of energy use and is seen as high potential to contribute to the savings. This should be realised in the first place by reducing the energy

  3. Wind Energy and Air Emission Reduction Benefits: A Primer

    Energy Technology Data Exchange (ETDEWEB)

    Jacobson, D.; High, C.

    2008-02-01

    This document provides a summary of the impact of wind energy development on various air pollutants for a general audience. The core document addresses the key facts relating to the analysis of emission reductions from wind energy development. It is intended for use by a wide variety of parties with an interest in this issue, ranging from state environmental officials to renewable energy stakeholders. The appendices provide basic background information for the general reader, as well as detailed information for those seeking a more in-depth discussion of various topics.

  4. The Clean Development Mechanism Re-engineered

    DEFF Research Database (Denmark)

    Lütken, Søren

    2016-01-01

    for engineering such mechanism, or indeed reengineering the CDM itself, to make it a viable mitigation financing tool, providing receipts for payments in the form of certified emission reductions (CER). Two solutions are presented, both of which secure new financing for projects that deliver real and measurable...... emissions reduction benefits on the basis of prospective revenues from emissions reduction: one introduces up-front securitization of the emissions reductions; the other builds on a defined value of the CERs without the need for a carbon price or a market for trading. Most of us use simple heuristics...... time. Simply put CERs are not project finance and do not address project capital needs when most needed — upfront. CER based returns are available only after a project is operational. That is why only one third of registered CDM projects went as far as to get their carefully calculated CERs issued...

  5. Cerámica Tzakol e interacción social durante el Clásico Temprano. Una mirada desde Naachtún, Petén, Guatemala

    Directory of Open Access Journals (Sweden)

    Alejandro Patiño Contreras

    2016-06-01

    Full Text Available En este trabajo, propongo que la cerámica Tzakol fue un elemento que permitió el establecimiento de afiliaciones socio−culturales particulares en las Tierras Bajas mayas. Utilizando el caso de las cerámicas del periodo Clásico Temprano (200-500/550 d.C. en el sitio de Naachtún, propongo que la dispersión de las cerámicas Tzakol tiene que ver con un esfuerzo por establecer sistemas de interacción de gran extensión, en parte como reacción a barreras sociales establecidas en épocas anteriores. La aceptación de éstos en Naachtún pudo representar una participación activa en redes extensas de interdependencia regional. Ello a su vez abrió el flujo de una cantidad considerable de recursos que permitieran el crecimiento de dicho centro.

  6. El estudio arqueométrico de la producciones cerámicas

    OpenAIRE

    C. Olaetxea; A. Alonso; M.C. Zuluaga; L.A. Ortega

    2005-01-01

    El estudio de la pasta de las cerámicas mediante lámina delgada, difracción de rayos X y su análisis quimico permite profundizar en el conocimiento sobre el origen de las mismas y en su tecnología de elaboración, asi como determinar las temperaturas minimas o maximas de cocción alcanzadas. De igual modo permite poner de manifiesto las modificaciones posteriores sufridas por el uso continuado de las mismas y por procesos tardíos debidos al soterramiento de las piezas. Los resultados obtenidos ...

  7. The question of energy reduction: The problem(s) with feedback

    International Nuclear Information System (INIS)

    Buchanan, Kathryn; Russo, Riccardo; Anderson, Ben

    2015-01-01

    With smart metering initiatives gaining increasing global popularity, the present paper seeks to challenge the increasingly entrenched view that providing householders with feedback about their energy usage, via an in-home-display, will lead them to substantially reduce their energy consumption. Specifically, we draw on existing quantitative and qualitative evidence to outline three key problems with feedback, namely: (a) the limited evidence of efficacy, (b) the need for user engagement, and (c) the potential for unintended consequences. We conclude by noting that, in their current form, existing in-home-displays may not induce the desired energy-reduction response anticipated by smart metering initiatives. Instead, if smart metering is to effectively reduce energy consumption there is a clear need to develop and test innovative new feedback devices that have been designed with user engagement in mind. - Highlights: • We provide a comprehensive critique of feedback and in-home-displays (IHDs). • We find limited evidence of the efficacy of feedback in reducing energy consumption. • Problematically the success of IHDs depends entirely on user engagement. • The unintended consequence of IHDs may undermine their energy reduction capabilities. • We call for new IHDs to be developed and evaluated with user engagement in mind

  8. Microestructura y propiedades de materiales cerámicos PZT con control de crecimiento de grano

    Directory of Open Access Journals (Sweden)

    Celi, L. A.

    1999-10-01

    Full Text Available Lead zirconate titanate ceramic powders have been surface modified by using phosphor esther 0.3% in volume. The phosphorous modification gave higher densities at lower temperatures associated with a reduction of the weight losses during the densification process. From the relationships between ceramic processing and microstructure, it was established that the phosphorous surface modification allows the effective grain growth control as well a higher homogeneity in the grain size distribution.

    Se ha realizado un proceso de modificación superficial con ester fosfato al 0.3% en volumen, sobre polvo cerámico de titanato circonato de plomo, PZT. Se observa que el material modificado con fósforo presenta una mayor densificación aparente a una temperatura menor unida a una reducción de las pérdidas de peso durante el proceso de densificación. Se han establecido las relaciones entre el procesamiento y las microestructuras del material PZT sin modificar y el modificado. Se evidencia un control del crecimiento de grano y una mayor homogeneidad en la distribución de tamaños de grano en el material modificado.

  9. Energy cost reduction in oil pipeline

    Energy Technology Data Exchange (ETDEWEB)

    Limeira, Fabio Machado; Correa, Joao Luiz Lavoura; Costa, Luciano Macedo Josino da; Silva, Jose Luiz da; Henriques, Fausto Metzger Pessanha [Petrobras Transporte S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil)

    2012-07-01

    One of the key questions of modern society consists on the rational use of the planet's natural resources and energy. Due to the lack of energy, many companies are forced to reduce their workload, especially during peak hours, because residential demand reaches its top and there is not enough energy to fulfill the needs of all users, which affects major industries. Therefore, using energy more wisely has become a strategic issue for any company, due to the limited supply and also for the excessive cost it represents. With the objective of saving energy and reducing costs for oil pipelines, it has been identified that the increase in energy consumption is primordially related to pumping stations and also by the way many facilities are operated, that is, differently from what was originally designed. Realizing this opportunity, in order to optimize the process, this article intends to examine the possibility of gains evaluating alternatives regarding changes in the pump scheme configuration and non-use of pump stations at peak hours. Initially, an oil pipeline with potential to reduce energy costs was chosen being followed by a history analysis, in order to confirm if there was sufficient room to change the operation mode. After confirming the pipeline choice, the system is briefly described and the literature is reviewed, explaining how the energy cost is calculated and also the main characteristics of a pumping system in series and in parallel. In that sequence, technically feasible alternatives are studied in order to operate and also to negotiate the energy demand contract. Finally, costs are calculated to identify the most economical alternative, that is, for a scenario with no increase in the actual transported volume of the pipeline and for another scenario that considers an increase of about 20%. The conclusion of this study indicates that the chosen pipeline can achieve a reduction on energy costs of up to 25% without the need for investments in new

  10. Analysis and application of a novel three-dimensional energy-saving and emission-reduction dynamic evolution system

    International Nuclear Information System (INIS)

    Fang, Guochang; Tian, Lixin; Sun, Mei; Fu, Min

    2012-01-01

    A novel three-dimensional energy-saving and emission-reduction chaotic system is proposed, which has not yet been reported in present literature. The system is established in accordance with the complicated relationship between energy-saving and emission-reduction, carbon emissions and economic growth. The dynamic behavior of the system is analyzed by means of Lyapunov exponents and bifurcation diagrams. With undetermined coefficient method, expressions of homoclinic orbits of the system are obtained. The Šilnikov theorem guarantees that the system has Smale horseshoes and the horseshoes chaos. Artificial neural network (ANN) is used to identify the quantitative coefficients in the simulation models according to the statistical data of China, and an empirical study of the real system is carried out with the results in perfect agreement with actual situation. It is found that the sooner and more perfect energy-saving and emission-reduction is started, the easier and sooner the maximum of the carbon emissions will be achieved so as to reduce carbon emissions and energy intensity. Numerical simulations are presented to demonstrate the results. -- Highlights: ► Use non-linear dynamical method to model the energy-saving and emission-reduction system. ► The energy-saving and emission-reduction attractor is obtained. ► Identify the unknown parameters of the energy-saving and emission-reduction system based on the statistical data. ► Evaluating the achievements of energy-saving and emission-reduction by the time-varying energy intensity calculation formula. ► Some statistical results based on the statistical data in China are presented, which are vivid and adherent to the reality.

  11. Passive energy jitter reduction in the cascaded third harmonic generation process

    International Nuclear Information System (INIS)

    Yan, L; Du, Y; You, Y; Sun, X; Wang, D; Hua, J; Shi, J; Lu, W; Huang, W; Chen, H; Tang, C; Huang, Z

    2014-01-01

    In free electron laser (FEL) systems with ultraviolet (UV) laser driven injectors, a highly stable UV source generated through cascaded third harmonic generation (THG) from an infrared (IR) source is a key element in guaranteeing the acceptable current jitter at the undulator. In this letter, the negative slope of the THG efficiency for high intensity ultrashort IR pulses is revealed to be a passive stabilization mechanism for energy jitter reduction in UV. A reduction of 2.5 times the energy jitter in UV is demonstrated in the experiment and simulations show that the energy jitter in UV can be reduced by more than one order of magnitude if the energy jitter in IR is less than 3%, with proper design of the THG efficiency curve, fulfilling the challenging requirement for UV laser stability in a broad scope of applications such as the photoinjector of x-ray FELs. (letter)

  12. Estudio de la recuperación de cromo hexavalente mediante un reactor electroquímico de compartimentos separados por separadores cerámicos

    OpenAIRE

    REYES PINEDA, HENRY

    2011-01-01

    La Tesis Doctoral "Estudio de la recuperación de cromo hexavalente mediante un reactor electroquímico de compartimentos separados por separadores cerámicos" se centra en la posibilidad de recuperación del cromo hexavalente procedente de las disoluciones de mordentado de las industrias de metalizado de plásticos mediante la utilización de un reactor electroquímico de compartimentos separados por separadores cerámicos fabricados a diferente presión y diferente composición de almidón. Con la rec...

  13. Identificación de una tradición tecnológica cerámica con desgrasante óseo en el Neolítico peninsular. Estudio arqueométrico de materiales cerámicos de Madrid (5300-3400 cal AC

    Directory of Open Access Journals (Sweden)

    Vírseda, Lydia

    2011-06-01

    Full Text Available The archaeometric characterization of a set of potsherds from six Neolithic sites from the Madrid region has allowed the identification of a new and time-persisting regional technological tradition, based on the deliberated addition of crushed bone as temper in most pottery containers. This is the first known case in Iberia, and is outstanding because of its early chronologies and persistence in time: from 5300 to perhaps 3400 cal BC. Samples were characterized by complementary mineralogical and geochemical techniques such as thin-section, conventional and grazing angle X-ray diffraction (XRD, scanning electron microscopy (SEM and X-ray fluorescence spectrometry (XRF. The addition of bone temper created a light and resistant ceramic material, with technological advantages for both the storage and transportation. Such advantages might be linked to mobile or semi-sedentary groups.

    La caracterización arqueométrica de un conjunto de materiales cerámicos procedentes de 6 yacimientos neolíticos de Madrid ha permitido identificar una nueva tradición tecnológica regional persistente en el tiempo, basada en la adición intencionada de hueso machacado como desgrasante en la mayoría de los recipientes cerámicos. Se trata del primer caso de la Península Ibérica en el que se documenta este tipo de desgrasante en cerámicas de estas cronologías con una continuidad temporal de entre el 5300/5200 hasta posiblemente el 3400 cal AC. Los materiales seleccionados se caracterizaron por técnicas mineralógicas y geoquímicas complementarias como lámina delgada, difracción de rayos X (DRX convencional y de ángulo rasante, microscopía electrónica de barrido (MEB y espectrometría de fluorescencia de rayos X (FRX. La adición de hueso produce un material cerámico ligero pero a su vez resistente, con ventajas tecnológicas para recipientes de almacenamiento y/o transporte. Dichas ventajas quizá podrían vincularse a grupos con hábitos m

  14. Coeficiente de fragilidad como medida más representativa de la resistencia a la abrasión de pavimentos cerámicos

    OpenAIRE

    Romero, Maximina; Rincón López, Jesús María; Boccaccini, A. R.

    2003-01-01

    [ES] La determinación de la resistencia a la abrasión de pavimentos cerámicos es objeto actualmente de una amplia polémica tanto científica como tecnológica, que afecta lógicamente a la aceptación por parte del sector industrial de mejores métodos para determinar dicha propiedad en pavimentos y revestimientos de tipo cerámico. Aunque el método tradicional PEI (Porcelain Enamel Institute) es aceptado generalmente por los fabricantes de azulejos; no obstante, es objeto de numerosas críticas deb...

  15. Cerámica común tardorromana, imitación de sigillata, en la provincia de Segovia. Aproximación al estudio de las producciones cerámicas del siglo V en la Meseta Norte y su transición al mundo hispano-visigodo

    Directory of Open Access Journals (Sweden)

    Juan Tovar, Luis Carlos

    1997-12-01

    Full Text Available The Vth century A.D. is possibly the least known period of Roman Hispania, especially as far as its material culture is concerned: town planning, architecture, pottery, metalwork, glass, and so on. In this paper we tackle a particular area of that material culture within a specific region: the common pottery (table and kitchen ware, imitation of the terra sigillata, in the Segovia province. Our essential aim has been to define its technical, typological and decorative characteristics, as well as the features it bears in common with the terra sigillata, and its significance in the origin of Hispanic-Visigothic pottery. In order to do so, we have taken into account ceramics from towns such as Cauca, Cerro del Castillo (in Bernardos or Cerro de la Virgen de Tormejón (in Armuña, as well as rural settlements (villae rusticae?, burying grounds (El Cantosal, Aguilafuente, Duratón, etc., and single findings.De la Hispania romana tal vez el periodo más desconocido sea el siglo V, sobre todo en los aspectos referidos a sus restos materiales: urbanismo, arquitectura, cerámica, metalistería, vidrio, etc. En este trabajo hemos abordado una parte concreta de esta cultura material en una zona determinada: la cerámica común (tanto de mesa, como de cocina, imitación de sigillata, en la provincia de Segovia. Definir sus características técnicas, tipológicas, decorativas, así como su similitud con la terra sigillata y su significado en la formación de la cerámica hispano-visigoda, ha sido nuestro objetivo básico. Para ello, hemos tenido en cuenta tanto cerámica proveniente de núcleos urbanos como Cauca, el Cerro del Castillo (en Bernardos o el Cerro de la Virgen de Tormejón (en Armuña, como de asentamientos rurales (¿villae rusticae?, necrópolis (El Cantosal, Aguilafuente, Duratón, etc. y hallazgos aislados.

  16. Utilizing ultrasonic energy for reduction of free fatty acids in crude ...

    African Journals Online (AJOL)

    Ultrasonic energy was used for the reduction of FFA in CPO. FFA content was measured at different sonication intervals, and the optimum time was determined. Hydrochloric acid showed the highest catalytic activity in the reduction of FFA content in CPO, as well as in converting FFA to fatty acid methyl ester (FAME).

  17. Estudio de procedencia de la cerámica del sitio arqueológico La Real, utilizando análisis por activación neutrónica y estadística multivariada

    OpenAIRE

    Bedregal, Patricia; Ubillús, Marco; Mendoza, Pablo; Montoya, Eduardo

    2014-01-01

    Los estudios de procedencia, utilizando fragmentos arqueológicos, requieren de información sobre la composición elemental de la pasta de cerámica. El análisis por activación neutrónica instrumental ha sido utilizado para caracterizar 100 fragmentos cerámicos encontrados en la zona arqueológica La Real en Arequipa y, el análisis estadístico multivariado para determinar su pertenencia y procedencia, incluyendo una comparación del patrón de composición química de los cerámicos de estilos locales...

  18. Latent Inhibition as a Function of US Intensity in a Two-Stage CER Procedure

    Science.gov (United States)

    Rodriguez, Gabriel; Alonso, Gumersinda

    2004-01-01

    An experiment is reported in which the effect of unconditioned stimulus (US) intensity on latent inhibition (LI) was examined, using a two-stage conditioned emotional response (CER) procedure in rats. A tone was used as the pre-exposed and conditioned stimulus (CS), and a foot-shock of either a low (0.3 mA) or high (0.7 mA) intensity was used as…

  19. Energy reduction using multi-channels optical wireless communication based OFDM

    Science.gov (United States)

    Darwesh, Laialy; Arnon, Shlomi

    2017-10-01

    In recent years, an increasing number of data center networks (DCNs) have been built to provide various cloud applications. Major challenges in the design of next generation DC networks include reduction of the energy consumption, high flexibility and scalability, high data rates, minimum latency and high cyber security. Use of optical wireless communication (OWC) to augment the DC network could help to confront some of these challenges. In this paper we present an OWC multi channels communication method that could lead to significant energy reduction of the communication equipment. The method is to convert a high speed serial data stream to many slower and parallel streams and vies versa at the receiver. We implement this concept of multi channels using optical orthogonal frequency division multiplexing (O-OFDM) method. In our scheme, we use asymmetrically clipped optical OFDM (ACO-OFDM). Our results show that the realization of multi channels OFDM (ACO-OFDM) methods reduces the total energy consumption exponentially, as the number of channels transmitted through them rises.

  20. Comparison study of noise reduction algorithms in dual energy chest digital tomosynthesis

    Science.gov (United States)

    Lee, D.; Kim, Y.-S.; Choi, S.; Lee, H.; Choi, S.; Kim, H.-J.

    2018-04-01

    Dual energy chest digital tomosynthesis (CDT) is a recently developed medical technique that takes advantage of both tomosynthesis and dual energy X-ray images. However, quantum noise, which occurs in dual energy X-ray images, strongly interferes with diagnosis in various clinical situations. Therefore, noise reduction is necessary in dual energy CDT. In this study, noise-compensating algorithms, including a simple smoothing of high-energy images (SSH) and anti-correlated noise reduction (ACNR), were evaluated in a CDT system. We used a newly developed prototype CDT system and anthropomorphic chest phantom for experimental studies. The resulting images demonstrated that dual energy CDT can selectively image anatomical structures, such as bone and soft tissue. Among the resulting images, those acquired with ACNR showed the best image quality. Both coefficient of variation and contrast to noise ratio (CNR) were the highest in ACNR among the three different dual energy techniques, and the CNR of bone was significantly improved compared to the reconstructed images acquired at a single energy. This study demonstrated the clinical value of dual energy CDT and quantitatively showed that ACNR is the most suitable among the three developed dual energy techniques, including standard log subtraction, SSH, and ACNR.

  1. The Electronic Data Methods (EDM) forum for comparative effectiveness research (CER).

    Science.gov (United States)

    Holve, Erin; Segal, Courtney; Lopez, Marianne Hamilton; Rein, Alison; Johnson, Beth H

    2012-07-01

    AcademyHealth convened the Electronic Data Methods (EDM) Forum to collect, synthesize, and share lessons from eleven projects that are building infrastructure and using electronic clinical data for comparative effectiveness research (CER) and patient-centered outcomes research (PCOR). This paper provides a brief review of participating projects and provides a framework of common challenges. EDM Forum staff conducted a text review of relevant grant programs' funding opportunity announcements; projects' research plans; and available information on projects' websites. Additional information was obtained from presentations provided by each project; phone calls with project principal investigators, affiliated partners, and staff from the Agency for Healthcare Research and Quality (AHRQ); and six site visits. Projects participating in the EDM Forum are building infrastructure and developing innovative strategies to address a set of methodological, and data and informatics challenges, here identified in a common framework. The eleven networks represent more than 20 states and include a range of partnership models. Projects vary substantially in size, from 11,000 to more than 7.5 million individuals. Nearly all of the AHRQ priority populations and conditions are addressed. In partnership with the projects, the EDM Forum is focused on identifying and sharing lessons learned to advance the national dialogue on the use of electronic clinical data to conduct CER and PCOR. These efforts have the shared goal of addressing challenges in traditional research studies and data sources, and aim to build infrastructure and generate evidence to support a learning health care system that can improve patient outcomes.

  2. Energy savings, emission reductions, and health co-benefits of the green building movement.

    Science.gov (United States)

    P, MacNaughton; X, Cao; J, Buonocore; J, Cedeno-Laurent; J, Spengler; A, Bernstein; J, Allen

    2018-06-01

    Buildings consume nearly 40% of primary energy production globally. Certified green buildings substantially reduce energy consumption on a per square foot basis and they also focus on indoor environmental quality. However, the co-benefits to health through reductions in energy and concomitant reductions in air pollution have not been examined.We calculated year by year LEED (Leadership in Energy and Environmental Design) certification rates in six countries (the United States, China, India, Brazil, Germany, and Turkey) and then used data from the Green Building Information Gateway (GBIG) to estimate energy savings in each country each year. Of the green building rating schemes, LEED accounts for 32% of green-certified floor space and publically reports energy efficiency data. We employed Harvard's Co-BE Calculator to determine pollutant emissions reductions by country accounting for transient energy mixes and baseline energy use intensities. Co-BE applies the social cost of carbon and the social cost of atmospheric release to translate these reductions into health benefits. Based on modeled energy use, LEED-certified buildings saved $7.5B in energy costs and averted 33MT of CO 2 , 51 kt of SO 2 , 38 kt of NO x , and 10 kt of PM 2.5 from entering the atmosphere, which amounts to $5.8B (lower limit = $2.3B, upper limit = $9.1B) in climate and health co-benefits from 2000 to 2016 in the six countries investigated. The U.S. health benefits derive from avoiding an estimated 172-405 premature deaths, 171 hospital admissions, 11,000 asthma exacerbations, 54,000 respiratory symptoms, 21,000 lost days of work, and 16,000 lost days of school. Because the climate and health benefits are nearly equivalent to the energy savings for green buildings in the United States, and up to 10 times higher in developing countries, they provide an important and previously unquantified societal value. Future analyses should consider these co-benefits when weighing policy

  3. Membranas cerámicas y su utilidad en procesos de separación

    Directory of Open Access Journals (Sweden)

    Hernández, A.

    1999-06-01

    Full Text Available Among the separation processes in the industry, those using membranes are usually considered as forming a new and promising field. From them, those which use ceramic membranes, which can be manufactured more selective now than some time ago, are especially relevant due to their high mechanic, thermal and chemical resistances. Here we will start by a summary description of the methods of synthesis of inorganic membranes and particularly ceramic ones. Traditional methods are presented as well as both the polymeric and the coloidal sol-gel techniques. In order to characterize them, pore size distributions and surface properties, including morphology, hydrophillicity and electrical properties should be investigated. Some techniques to study these structural and surface properties are summarily presented. The ceramic membranes can substitute polymeric ones in most of their typical applications with profit due to their better performances and durability.

    Entre los procesos industriales de separación, los que se basan en membranas se consideran como un nuevo y prometedor campo en desarrollo. Entre éstos, los basados en el uso de membranas cerámicas por sus características de resistencia mecánica, térmica y química y cada vez mayor selectividad han adquirido una gran relevancia. En este trabajo se comenzará haciendo una breve descripción de los métodos de síntesis de membranas inorgánicas y en particular cerámicas. Se exponen tanto los métodos tradicionales como los de sol-gel por vías polimérica y coloidal. Para caracterizar estas membranas se deben obtener sus distribuciones de tamaño de poro y propiedades superficiales tanto morfológicas como relacionadas con la hidrofílicidad y sus propiedades eléctricas. Algunas técnicas de investigación de estas propiedades estructurales y superficiales se exponen también resumidamente. Las membranas cerámicas pueden usarse en las mismas aplicaciones que las membranas polim

  4. Hypersonic wave drag reduction performance of cylinders with repetitive laser energy depositions

    International Nuclear Information System (INIS)

    Fang, J; Hong, Y J; Li, Q; Huang, H

    2011-01-01

    It has been widely research that wave drag reduction on hypersonic vehicle by laser energy depositions. Using laser energy to reduce wave drag can improve vehicle performance. A second order accurate scheme based on finite-difference method and domain decomposition of structural grid is used to compute the drag performance of cylinders in a hypersonic flow of Mach number 2 at altitude of 15km with repetitive energy depositions. The effects of frequency on drag reduction are studied. The calculated results show: the recirculation zone is generated due to the interaction between bow shock over the cylinder and blast wave produced by energy deposition, and a virtual spike which is supported by an axis-symmetric recirculation, is formed in front of the cylinder. By increasing the repetitive frequency, the drag is reduced and the oscillation of the drag is decreased; however, the energy efficiency decreases by increasing the frequency.

  5. Evaluation of measures for greenhouse gas emissions reduction in energy supply sector

    International Nuclear Information System (INIS)

    Khristov, Kh.; Todorova, S.; Vasilev, Kh.; Simeonova, K.

    1996-01-01

    This study performed by the Energoproekt Company, Sofia (BG) is aimed at estimating the economic costs of CO 2 emissions reduction in the electricity supply system for the period 2000-2020. The specific capital investment and cost price of the following technical options have been compared: reduction of electricity and heat loss; gas and steam cycle power plants; micro hydro potential; renewable sources; extension of nuclear power installations; gas steam turbine equipment; combined cycle power plants. The evaluation is made according to requirements of a baseline scenario - to develop an import-independent energy supply policy and an economic growth without sharp structural changes. A 25-year-operation of a hypothetical energy supply system is modelled by the ENPEP code (ANL, US). The three least-cost options identified are: power loss reduction; gas and steam cycle PPs and hydroelectric objects. An optimal combination of measures, so called ' aggregated scenario' is proposed. It would allow for CO 2 reduction by 23,7 mill tons and prime cost reduction by $19,83 per ton reduced emissions. 3 refs., 2 tabs

  6. Obtenção de amidos termoplásticos para a extrusão de pós cerâmicos

    Directory of Open Access Journals (Sweden)

    Laricy Janaína Dias do Amaral

    2016-01-01

    Full Text Available Resumo Polímeros termoplásticos podem ser utilizados como veículo orgânico (VO em processos de conformação de peças cerâmicas por extrusão. Neste contexto, termoplásticos à base de amido surgem como uma alternativa sustentável ao emprego das poliolefinas convencionalmente utilizadas na formulação de pastas cerâmicas. O passo inicial para o desenvolvimento de um feedstock (carga extrudável é a seleção adequada do sistema polimérico ligante, o qual é responsável por conferir propriedades reológicas adequadas durante o processamento. O presente trabalho se propôs a caracterizar termoplásticos a base de amido obtidos na presença de ácido cítrico e avaliar o potencial de utilização destes materiais na extrusão de pós cerâmicos. A processabilidade das pré-misturas de amido foi avaliada em extrusora dupla-rosca e em reômetro de torque. A variação dos teores de água e glicerol na composição das pré-misturas de amido influenciou significativamente as interações entre as cadeias poliméricas, promovendo alterações nos valores de densidade e de viscosidade para a maior parte das amostras analisadas. O amido foi parcialmente esterificado como efeito da ação do ácido cítrico no sistema. Dentre as formulações investigadas, a amostra hidratada e processada com 34% p/p de glicerol (H-34 foi a que apresentou as melhores propriedades de pasta, podendo ser futuramente empregada em processos de conformação de pós cerâmicos.

  7. Incorporação de lodo da estação de tratamento de esgoto (ETE em cerâmica vermelha

    Directory of Open Access Journals (Sweden)

    I. O. R. Areias

    Full Text Available Resumo Este trabalho teve por objetivo avaliar a incorporação de resíduo de estação de tratamento de esgoto (ETE na produção de cerâmica vermelha. As matérias-primas utilizadas foram: massa cerâmica argilosa e resíduo de ETE provenientes do município de Campos dos Goytacazes - RJ. As matérias-primas foram caracterizadas pelas técnicas de fluorescência de raios X e difração de raios X; além disso, foi determinada a área de superfície específica das mesmas por meio das técnicas de BET e azul de metileno. O comportamento térmico do resíduo de ETE foi avaliado por meio de análise termogravimétrica. Formulações foram preparadas com 0, 2,5, 10 e 15% em massa de resíduo de ETE incorporados à massa argilosa. Corpos de prova foram confeccionados por prensagem uniaxial a 20 MPa com 8% de umidade para calcinação a 950 °C. As propriedades físicas e mecânicas avaliadas das cerâmicas calcinadas foram retração linear, absorção de água e resistência à compressão. A microestrutura destas peças foi investigada com auxílio de microscopia eletrônica de varredura. Os resultados indicaram que este tipo de resíduo deve ser incorporado em pequenas quantidades (até 2,5% para não prejudicar as propriedades físicas e mecânicas da cerâmica.

  8. Diseño decorativo de pavimentos cerámicos adaptado a inyección de tinta mediante tratamiento digital de imagen

    Directory of Open Access Journals (Sweden)

    Defez, B.

    2013-08-01

    Full Text Available The ceramic tile sector is a very competitive industry. The designer’s proficiency to offer new models of the decorated surface, adapted to the production means, plays a very important role in the competitiveness. In the present work, we analyze the evolution of the design process in the ceramic sector, as much as the changes experimented in parallel by the printing equipment. Afterwards, we present a new concept of ceramic design, based on digital image processing. This technique allows the generation of homogeneous and non-repetitive designs for large surfaces, especially thought for inkjet printing. With the programmed algorithms we have compiled a prototype software for the assistance of the ceramic design. This tool allows creating continuous designs for large surfaces saving developing time.El sector productivo de pavimentos y revestimientos cerámicos es una industria muy competitiva. La capacidad de los diseñadores de ofrecer modelos con nuevos diseños de la cara vista, adaptados a los medios de producción, juega un papel muy importante en la competitividad. En el presente trabajo se analiza la evolución del proceso de diseño en el sector cerámico, así como los cambios experimentados de forma paralela por los medios de impresión. A continuación se presenta un nuevo concepto de diseño de baldosa cerámica, basado en procesado de imagen digital. Esta técnica permite la generación de diseños homogéneos y no repetitivos de grandes superficies, especialmente pensados para la decoración mediante inyección de tinta. Con los algoritmos programados se ha creado un programa informático prototipo de ayuda al diseño cerámico. Esta herramienta permite crear diseños continuos para grandes superficies ahorrando tiempo de desarrollo.

  9. Fluência em filtros cerâmicos de Al2O3 Creep in Al2O3 ceramic filters

    Directory of Open Access Journals (Sweden)

    V. R. Salvini

    2001-12-01

    Full Text Available O comportamento de fluência em materiais cerâmicos sólidos é afetado pela sua microestrutura. Fundamentalmente, são três os parâmetros que influenciam o comportamento de fluência nestes materiais: o constituinte mineralógico, a fase vítrea e a porosidade. Além destes fatores microestruturais, a fluência em cerâmicas celulares depende também da sua macroestrutura, constituída de um arranjo tridimensional de filamentos sólidos interligados. Assim, a análise dos resultados de fluência nestes materiais compreende duas etapas: na primeira deve-se identificar o modo de deformação dos filamentos cerâmicos (macroestrutura e na segunda, identificar o(s mecanismo(s de fluência da microestrutura através dos parâmetros n (expoente da tensão aplicada e Q (energia de ativação do processo. Neste trabalho avaliou-se a fluência em filtros cerâmicos de Al2O3 de 10 ppi sob compressão de 0,034; 0,051 e 0,068 MPa às temperaturas de 1500, 1550 e 1600 ºC ao ar. De acordo com os resultados obtidos, supõe-se que o modo de deformação por flambagem dos filamentos paralelos a carga aplicada é um dos principais fatores que contribui para o aumento da taxa de deformação do filtro e, portanto, dos valores de n e Q. Além do modo de deformação dos filamentos, observou-se que o tipo de ensaio de fluência (com ou sem troca de carga também influencia a determinação dos valores de n e Q.The creep behavior of solid ceramics is strongly affected by the microstructure. Fundamentally, there are three microstructural features which influence the creep behavior: the mineral content, the flux content and the apparent porosity. Additionally, the creep of cellular ceramics also depends on their macrostructure constituted by a tridimensional array of struts. Therefore, the creep analysis of these materials should consist of two stages. Firstly, identification of the macrostructure deformation mode and secondly, determination of the stress exponent

  10. Neutrino nuclear responses for double beta decays and astro neutrinos by charge exchange reactions

    Science.gov (United States)

    Ejiri, Hiroyasu

    2014-09-01

    Neutrino nuclear responses are crucial for neutrino studies in nuclei. Charge exchange reactions (CER) are shown to be used to study charged current neutrino nuclear responses associated with double beta decays(DBD)and astro neutrino interactions. CERs to be used are high energy-resolution (He3 ,t) reactions at RCNP, photonuclear reactions via IAR at NewSUBARU and muon capture reactions at MUSIC RCNP and MLF J-PARC. The Gamow Teller (GT) strengths studied by CERs reproduce the observed 2 neutrino DBD matrix elements. The GT and spin dipole (SD) matrix elements are found to be reduced much due to the nucleon spin isospin correlations and the non-nucleonic (delta isobar) nuclear medium effects. Impacts of the reductions on the DBD matrix elements and astro neutrino interactions are discussed.

  11. The Polyketide Components of Waxes and the Cer-cqu Gene Cluster Encoding a Novel Polyketide Synthase, the β-Diketone Synthase, DKS.

    Science.gov (United States)

    von Wettstein-Knowles, Penny

    2017-07-10

    The primary function of the outermost, lipophilic layer of plant aerial surfaces, called the cuticle, is preventing non-stomatal water loss. Its exterior surface is often decorated with wax crystals, imparting a blue-grey color. Identification of the barley Cer-c , -q and -u genes forming the 101 kb Cer-cqu gene cluster encoding a novel polyketide synthase-the β-diketone synthase (DKS), a lipase/carboxyl transferase, and a P450 hydroxylase, respectively, establishes a new, major pathway for the synthesis of plant waxes. The major product is a β-diketone (14,16-hentriacontane) aliphatic that forms long, thin crystalline tubes. A pathway branch leads to the formation of esterified alkan-2-ols.

  12. Enzymatic versus Inorganic Oxygen Reduction Catalysts: Comparison of the Energy Levels in a Free-Energy Scheme

    DEFF Research Database (Denmark)

    Kjærgaard, Christian Hauge; Rossmeisl, Jan; Nørskov, Jens Kehlet

    2010-01-01

    In this paper, we present a method to directly compare the energy levels of intermediates in enzymatic and inorganic oxygen reduction catalysts. We initially describe how the energy levels of a Pt(111) catalyst, operating at pH = 0, are obtained. By a simple procedure, we then convert the energy...... levels of cytochrome c oxidase (CcO) models obtained at physiological pH = 7 to the energy levels at pH = 0, which allows for comparison. Furthermore, we illustrate how different bias voltages will affect the free-energy landscapes of the catalysts. This allows us to determine the so-called theoretical...

  13. El laboratorio en la investigación cerámica. Análisis dilatométrico

    Directory of Open Access Journals (Sweden)

    Fernando Arredondo

    2017-06-01

    Full Text Available Se estudian las variaciones dimensionales que experimenta una arcilla durante su cocción, así como los métodos actuales para determinarlas. Se describe el dilatómetro, usado en el laboratorio de cerámica del I. T. C. G. para realizar el análisis dilatométrico.

  14. Piezocomposites metal-cerámica como elementos activos en acelerómetros

    OpenAIRE

    Ochoa, Pilar; Villegas, Marina; Pons Rovira, José Luis; Fernández Lozano, José Francisco; Bengochea, M. A.

    2002-01-01

    [ES] Los materiales cerámicos piezoeléctricos presentan un número importante y en continuo aumento de aplicaciones. Entre éstas su utilización como elementos activos en el diseño de acelerómetros posibilita el control de vibraciones en la industria del transporte, aerospacial, robótica e ingeniería civil entre otras. Entre los múltiples diseños como material compuesto destaca, gracias a sus elevados coeficientes de carga efectivos, el denominado tipo címbalo. En este trabajo se compr...

  15. The energy requirement of holidays and household reduction options

    International Nuclear Information System (INIS)

    Van den Berg, M.; Vringer, K.

    1999-12-01

    Like all consumer products and services, holidays require energy. The aim of this study is to give insight to the energy consumption for holidays of Dutch households and to suggest options to reduce this energy demand. To examine the energy consumption for holidays, nine holiday packages are composed, each representing a large group of Dutch vacationers. The packages describe the destination, means of transport, duration, accommodation and number of vacationers. The average energy requirement for the accommodation and transport for long summer holidays is 12.5 GJ per Dutch household, excluding the energy requirement for food and activities. About 10% of the Dutch households, the ones that travel by plane to their holiday destination, consume 70% of the total amount of energy all households require for holiday purposes. This is mainly due to the distance travelled, rather than to the chosen means of transport. If the travelled distances will be reduced by 50% and all nights are spent in a tent, the average household energy requirement would be 6.1 GJ, a reduction of more than 50%. 36 refs

  16. Assesment of Energy Options for CO2 Emission Reduction

    International Nuclear Information System (INIS)

    Cavlina, Nikola

    2014-01-01

    Since the 1992 Earth Summit in Rio de Janeiro, global anthropogenic CO 2 emissions grew by 52% which caused an increase in 10.8% in the CO 2 concentration in the atmosphere, and it tipped the 400 ppm mark in May 2013. The Fifth Assessment Report on climate impacts from the Intergovernmental Panel on Climate Change (IPCC) confirmed earlier warnings that climate change is already stressing human communities, agriculture, and natural ecosystems, and the effects are likely to increase in the future. While European Union has long been committed to lowering carbon emissions, this places additional pressure on current EU goals for energy sector that includes significant reduction of CO 2 emissions. Current EU commitment has been formalized in so-called '20-20-20' plan, reducing carbon emissions, increasing energy efficiency and increasing energy production from renewables by 20% by 2020. Some EU member states are even more ambitious, like United Kingdom, planning to reduce carbon emissions by 80% by 2050. Bulk of carbon reduction will have to be achived in energy sector. In the power industry, most popular solution is use of solar and wind power. Since their production varies significantly during the day, for the purpose of base-load production they can be paired with gas-fired power plant. Other possible CO 2 -free solution is nuclear power plant. In this invited lecture, predicted cost of energy production for newly bulit nuclear power plant and newly built combination of wind or solar and gas-fired power plant are compared. Comparison was done using Levelized Unit of Energy Cost (LUEC). Calculations were performed using the Monte Carlo method. For input parameters that have biggest uncertainty (gas cost, CO 2 emission fee) those uncertainties were addressed not only through probability distribution around predicted value, but also through different scenarious. (author)

  17. Regulation of very-long acyl chain ceramide synthesis by acyl-CoA-binding protein

    DEFF Research Database (Denmark)

    Ferreira, Natalia Santos; Engelsby, Hanne; Neess, Ditte

    2017-01-01

    and cardiovascular diseases, as well as neurological disorders. Here we show that acyl-coenzyme A-binding protein (ACBP) potently facilitates very-long acyl chain ceramide synthesis. ACBP increases the activity of ceramide synthase 2 (CerS2) by more than 2-fold and CerS3 activity by 7-fold. ACBP binds very......-long-chain acyl-CoA esters, which is required for its ability to stimulate CerS activity. We also show that high-speed liver cytosol from wild-type mice activates CerS3 activity, whereas cytosol from ACBP knock-out mice does not. Consistently, CerS2 and CerS3 activities are significantly reduced in the testes...... of ACBP(-/-) mice, concomitant with a significant reduction in long- and very-long-chain ceramide levels. Importantly, we show that ACBP interacts with CerS2 and CerS3. Our data uncover a novel mode of regulation of very-long acyl chain ceramide synthesis by ACBP, which we anticipate is of crucial...

  18. Point Climat no. 13 'Will there still be a market price for CERs and ERUs in two years time?'

    International Nuclear Information System (INIS)

    Bellassen, Valentin; Stephan, Nicolas; Leguet, Benoit

    2012-01-01

    Among the publications of CDC Climat Research, 'Climate Briefs' presents, in a few pages, hot topics in climate change policy. This issue addresses the following points: Medium-term (i.e. pre-2015) demand for credits from the EU ETS and secondary sources of demand appears to be limited to 1.6 billion tCO 2 e. The supply of Kyoto credits is relatively predictable, and will cover demand between now and 2013-2014 according to our base-case scenario. Our view is that the demand-supply equilibrium will lead to a de-correlation between the price of Kyoto credits and the EUA price, and may lead to a price for Kyoto credits that is very low, or almost nil. Unless CER and ERU demand-side policies are modified, we do not foresee any rebound in CER and ERU prices beyond the current year

  19. Potential reduction of energy consumption in public university library

    Science.gov (United States)

    Noranai, Z.; Azman, ADF

    2017-09-01

    Efficient electrical energy usage has been recognized as one of the important factor to reduce cost of electrical energy consumption. Various parties have been emphasized about the importance of using electrical energy efficiently. Inefficient usage of electrical energy usage lead to biggest factor increasing of administration cost in Universiti Tun Hussein Onn Malaysia. With this in view, a project the investigate potential reduction electrical energy consumption in Universiti Tun Hussein Onn Malaysia was carried out. In this project, a case study involving electrical energy consumption of Perpustakaan Tunku Tun Aminah was conducted. The scopes of this project are to identify energy consumption in selected building and to find the factors that contributing to wastage of electrical energy. The MS1525:2001, Malaysian Standard - Code of practice on energy efficiency and use of renewable energy for non-residential buildings was used as reference. From the result, 4 saving measure had been proposed which is change type of the lamp, install sensor, decrease the number of lamp and improve shading coefficient on glass. This saving measure is suggested to improve the efficiency of electrical energy consumption. Improve of human behaviour toward saving energy measure can reduce 10% from the total of saving cost while on building technical measure can reduce 90% from total saving cost.

  20. Materias primas para pavimentos y revestimientos cerámicos en la región de Murcia

    Directory of Open Access Journals (Sweden)

    Fernández, C.

    2001-10-01

    Full Text Available The clay industry of the Murcia Region has never had a relevant industrial importance, with only around ten brick operations in the last few years. Today only only two brid factories are operative having certain size. The extraordinary industrial development currently experienced by the Region has leaded to the development of new initiatives which need institutional backing. In this framework and under the sponsoring of the Council of Technologies, Industry and Commerce of the Autonomic Community, the Spanish Geological Survey (ITGE has carried out a general survey for raw materials for the ceramic industry in the region, mainly aimed to find clays for ceramic gres and glazed tiles, whose results are discussed in this paper. Murcia has a very complicated geology, being carbonated marine sediments the most important lithologies. Due to it, it is difficult to find no-carbonated shales or clays to produce gres tiles. We have found six zones containing different clay types, that reach a few hundreds million tons of resources. With that clays we have produce in the laboratory gres tiles and glazed tiles of commercial quality.

    La industria cerámica de la Región de Murcia no ha tenido gran importancia industrial, limitándose a una decena de fábricas de ladrillos. Hoy en día sólo operan en la región 2 fábricas de ladrillos de cierta entidad. El extraordinario desarrollo industrial que experimenta actualmente la Región suscita nuevas iniciativas empresariales, que precisan del apoyo institucional. En este marco y bajo el auspicio y con la financiación parcial de la Consejería Tecnologías, Industria y Comercio de la Comunidad Autónoma, el Instituto Tecnológico Geominero de España ha realizado en los tres últimos años una investigación general de materias primas para la industria cerámica en la región, especialmente dirigida a localizar arcillas para pavimentos y revestimientos cerámicos, cuyos resultados se exponen en este

  1. Transportation Energy Futures Series: Effects of Travel Reduction and Efficient Driving on Transportation: Energy Use and Greenhouse Gas Emissions

    Energy Technology Data Exchange (ETDEWEB)

    Porter, C. D.; Brown, A.; DeFlorio, J.; McKenzie, E.; Tao, W.; Vimmerstedt, L.

    2013-03-01

    Since the 1970s, numerous transportation strategies have been formulated to change the behavior of drivers or travelers by reducing trips, shifting travel to more efficient modes, or improving the efficiency of existing modes. This report summarizes findings documented in existing literature to identify strategies with the greatest potential impact. The estimated effects of implementing the most significant and aggressive individual driver behavior modification strategies range from less than 1% to a few percent reduction in transportation energy use and GHG emissions. Combined strategies result in reductions of 7% to 15% by 2030. Pricing, ridesharing, eco-driving, and speed limit reduction/enforcement strategies are widely judged to have the greatest estimated potential effect, but lack the widespread public acceptance needed to accomplish maximum results. This is one of a series of reports produced as a result of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

  2. Transportation Energy Futures Series. Effects of Travel Reduction and Efficient Driving on Transportation. Energy Use and Greenhouse Gas Emissions

    Energy Technology Data Exchange (ETDEWEB)

    Porter, C. D. [National Renewable Energy Lab. (NREL) and Cambridge Systematics, Golden, CO (United States); Brown, A. [National Renewable Energy Lab. (NREL) and Cambridge Systematics, Golden, CO (United States); DeFlorio, J. [National Renewable Energy Lab. (NREL) and Cambridge Systematics, Golden, CO (United States); McKenzie, E. [National Renewable Energy Lab. (NREL) and Cambridge Systematics, Golden, CO (United States); Tao, W. [National Renewable Energy Lab. (NREL) and Cambridge Systematics, Golden, CO (United States); Vimmerstedt, L. [National Renewable Energy Lab. (NREL) and Cambridge Systematics, Golden, CO (United States)

    2013-03-01

    Since the 1970s, numerous transportation strategies have been formulated to change the behavior of drivers or travelers by reducing trips, shifting travel to more efficient modes, or improving the efficiency of existing modes. This report summarizes findings documented in existing literature to identify strategies with the greatest potential impact. The estimated effects of implementing the most significant and aggressive individual driver behavior modification strategies range from less than 1% to a few percent reduction in transportation energy use and GHG emissions. Combined strategies result in reductions of 7% to 15% by 2030. Pricing, ridesharing, eco-driving, and speed limit reduction/enforcement strategies are widely judged to have the greatest estimated potential effect, but lack the widespread public acceptance needed to accomplish maximum results. This is one of a series of reports produced as a result of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

  3. Crescimento de trinca subcrítico em cerâmicas odontológicas: efeito do material (microestrutura) e do método de ensaio

    OpenAIRE

    Carla Castiglia Gonzaga

    2007-01-01

    O objetivo deste trabalho foi realizar a caracterização microestrutural e das propriedades mecânicas de diferentes cerâmicas odontológicas para entender sua influência nos parâmetros de crescimento de trinca subcrítico (SCG), n (coeficiente de susceptibilidade ao SCG) e ?f0 (parâmetro escalar), determinados por diferentes métodos. Cinco cerâmicas foram avaliadas: porcelanas VM7 (Vita) e D (d.Sign, Ivoclar), vitrocerâmicas E1 (IPS Empress, Ivoclar) e E2 (IPS Empress 2, Ivoclar) e compósito IC ...

  4. Capacitor voltage ripple reduction and arm energy balancing in MMC-HVDC

    DEFF Research Database (Denmark)

    Parikh, Harsh; Martin-Loeches, Ruben Sánches; Tsolaridis, Georgios

    2016-01-01

    Modular Multilevel Converters are emerging and widely used in HVDC applications. However, the submodule capacitors are still large and the energy balancing under unbalanced conditions is a challenge. In this paper, an analytical model focusing on the energy stored in the capacitors and voltage...... variations is utilized in order to achieve better performance. By injecting a second order harmonic component into the circulating current, the energy variation and consequently the capacitor voltage ripple is reduced allowing for a capacitor size reduction. At the same time, an arm energy balancing...

  5. Innovaciones técnicas, estilísticas y temáticas en la cerámica de los Zuloaga

    Directory of Open Access Journals (Sweden)

    Rubio Celada, A.

    1999-08-01

    Full Text Available The Zuloagas’ ceramics covers several generations, since the 1870’s. The first artists in the family were Guillermo, Germán and Daniel. Their father, Eusebio, arquebusier of Queen Isabel II and Chief of the Royal Gunsmith’s House, sent them to study to the school of ceramics in Sévres, France. The resurgence of the factory of La Moncloa, in Madrid, was possible thanks to them. The Zuloagas restored the traditional techniques in ceramics; for example, the one of “cuerda seca” or “cuenca”-glazed and lustre painted ones, introducing the styles that were on fashion in Europe: Neo-Renaissance and Modernism. In 1893, Daniel Zuloaga settled into the Vargas factory in Segovia, and he opened, at the beginning of the XIX century his own workshop in the church of San Juan de los Caballeros, of Romanesque style, placed in the centre of this town, Segovia. Here he was helped by his son and daughters, Juan, Esperanza and Teodora, adopting new trends in art, like the Neo-Romanesque style and the Regionalist style, with themes he took from Castilian models and customs, within the aesthetic lines of the 98’s Generation.In his workshop he constantly investigated into ceramics and he even developed original techniques, like glazing on slate or applying photographs to ceramics.

    La cerámica de los Zuloaga abarca varias generaciones, desde los años setenta del siglo XIX. Los primeros son Guillermo, Germán y Daniel, a los que su padre, Eusebio, arcabucero de Isabel II y director de la Real Armería, manda a estudiar a la Escuela de Cerámica de Sèvres. A ellos se deberá el resurgir de la fábrica de la Moncloa. Los Zuloaga recuperarán las técnicas cerámicas tradicionales, como la cuerda seca, la cuenca y el reflejo metálico, introduciendo los estilos de moda en Europa como el Neorrenacimiento y el Modernismo. En 1893 Daniel Zuloaga se establece en la Fábrica de Vargas en Segovia, instalando a principios de siglo su propio taller, en

  6. Revestimientos internos cerámicos para chimeneas industriales

    Directory of Open Access Journals (Sweden)

    Serradilla Echarri, Jesús

    1985-03-01

    Full Text Available The present article shows the different factors intervening on the study and later setting into service of the internal ceramic liner for industrial chimneys. Firstly they are studied the diverse existing options and later decision as to the solution to be adopted. Also they are specified the physicochemical peculiar characteristics of the material as well as the criterion to folio w with regards to the adecuate dispositive for the material's quality control.En el presente artículo, se estudian los diversos factores que intervienen en el estudio y posterior puesta en servicio de los revestimientos internos cerámicos para chimeneas de uso industrial. Se estudian inicialmente las diversas opciones existentes y posterior decisión en cuanto a la solución a adoptar. También se especifican las características físico-químicas propias del material, así como los criterios a seguir en cuanto al dispositivo adecuado para el Control de Calidad del material.

  7. Equating Efficiency with Reduction: A Self-Deception in Energy Policy

    DEFF Research Database (Denmark)

    Wilhite, Harold; Nørgaard, Jørgen

    2004-01-01

    power, mobility and so on). The policy makers at the centre of the policy discourse on energy sustainability suffer from a form for self-deception which revolves around the equation of ‘efficiency’ with ‘reduction’ and ‘sustainability’, i.e., the untenable contention that technological and market...... and infrastructure for homes, businesses, transport, health and public services, so that it is neither ethical nor even practical to argue for restrictions in overall energy growth in these and other developing countries. This places the onus for deep reductions in energy use on Europe, North America and the other...

  8. Energy transition, carbon dioxide reduction and output growth in the Swedish pulp and paper industry: 1973-2006

    International Nuclear Information System (INIS)

    Lindmark, Magnus; Bergquist, Ann-Kristin; Andersson, Lars Fredrik

    2011-01-01

    This study examines the historical relation between carbon dioxide emission and output growth in the Swedish pulp and paper industry from 1973 to 2006. We find that the industry achieved an 80 percent reduction in carbon dioxide emission, where most of the reduction took place before the implementation of active climate policy in 1991. Foremost energy substitution and also efficiency improvements contributed to the reduction. Growing prices of fossil fuel due to market price change and taxes and subsidies, explains most of the efficiency improvements and substitution. The study finds that energy transformation was coinciding with ongoing structural change in the industry during the 1970s and 1980s as well as a strong period of environmental adaption. We therefore suggest that the oil reduction was reinforced through the dynamics between the energy issue and an overall renewing process of the industry. This suggests a need to coordinate climate and environmental policy measures with the long-term industrial dynamics of structural change. - Highlights: → We find that the energy mix changed substantially in the wake of the oil price crises during the 1970s. → Large price changes were needed to motivate the energy transformation and subsequent reductions of CO 2 emissions. → Energy prices represent an ultimate driver for the reduction of CO 2 emissions. → The energy transformation coincided with the environmental adaptation of the industry.

  9. Reduction of energy use in mushroom cultivation; Reductie energiegebruik in de champignonteelt

    Energy Technology Data Exchange (ETDEWEB)

    Baar, J; Amsing, J G.M.; Rutjens, A J

    2005-01-15

    The aim of this project was to examine options for reducing energy use in mushroom cultivation. The project focused particularly on the reduction of energy use in making the mushrooms disease-free through use of steam prior to the next cultivation round. To this end, various methods were examined that could lead to a 50% energy use reduction for mushroom cultivation, or higher [Dutch] Het doel van dit project was om te onderzoeken welke mogelijkheden er zijn om het energiegebruik in de teelt van champignons te verminderen. Met name richtte het project zich op de reductie van het energiegebruik bij het ziektevrij maken van de teeltcellen door stomen voorafgaande aan de volgende teelt. Hiertoe werden diverse methoden onderzocht die kunnen leiden tot een reductie van het energieverbruik van 50% of meer voor de champignonteelt.

  10. Materiales en lámina delgada sobre sustratos cerámicos para aplicaciones fotovoltaicas

    Directory of Open Access Journals (Sweden)

    Guillén, C.

    2005-02-01

    Full Text Available Various ceramic supports besides standard soda-lime glass have been utilized as substrates for deposition of molybdenum and copper indium diselenide layers (substrate/Mo/CuInSe2 heterostructures for application in thin film photovoltaic solar cells. Molybdenum layers have been prepared simultaneously onto the different substrates by electron gun assisted evaporation. Subsequently, CuInSe2 thin films have been obtained by direct electrodeposition onto the Mo-coated substrates. The influence of the substrate characteristics onto the optical and structural properties of the developed materials has been determined to evaluate the possibility of substituting the commonly utilized glass by ceramics that can wide the applications of these photovoltaic systems. The obtained results indicate that the scattering factor and the structural stress in the layers are minimized when the morphological characteristics of the ceramic are close to those of the standard glass substrates.

    Se han probado distintos tipos de soportes cerámicos y vidrio sodocálcico convencional como sustratos sobre los que se han depositado películas de molibdeno y seleniuro de cobre e indio (heteroestructuras de la forma sustrato/Mo/CuInSe2 para su aplicación en células solares fotovoltaicas de lámina delgada. Las películas de Mo se han preparado simultáneamente sobre los distintos sustratos mediante evaporación asistida por cañón de electrones. A continuación, las láminas delgadas de CuInSe2 se han obtenido mediante electrodepósito directo sobre los sustratos cubiertos con Mo. Se ha determinado la influencia del tipo de sustrato empleado sobre las propiedades ópticas y estructurales de los materiales preparados, con objeto de evaluar las posibilidades de sustitución del soporte de vidrio usualmente utilizado por materiales cerámicos que permitan diversificar las aplicaciones fotovoltaicas de este tipo de sistemas. Los resultados obtenidos indican que el factor

  11. Technology Roadmap for Energy Reduction in Automotive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2008-09-01

    U.S. Department of Energy’s (DOE) Industrial Technologies Program (ITP), in collaboration with the United States Council for Automotive Research LLC (USCAR), hosted a technology roadmap workshop in Troy, Michigan in May 2008. The purpose of the workshop was to explore opportunities for energy reduction, discuss the challenges and barriers that might need to be overcome, and identify priorities for future R&D. The results of the workshop are presented in this report.

  12. Effects of the high-density lipoprotein mimetic agent CER-001 on coronary atherosclerosis in patients with acute coronary syndromes: a randomized trial.

    Science.gov (United States)

    Tardif, Jean-Claude; Ballantyne, Christie M; Barter, Philip; Dasseux, Jean-Louis; Fayad, Zahi A; Guertin, Marie-Claude; Kastelein, John J P; Keyserling, Constance; Klepp, Heather; Koenig, Wolfgang; L'Allier, Philippe L; Lespérance, Jacques; Lüscher, Thomas F; Paolini, John F; Tawakol, Ahmed; Waters, David D

    2014-12-07

    High-density lipoproteins (HDLs) have several potentially protective vascular effects. Most clinical studies of therapies targeting HDL have failed to show benefits vs. placebo. To investigate the effects of an HDL-mimetic agent on atherosclerosis by intravascular ultrasonography (IVUS) and quantitative coronary angiography (QCA). A prospective, double-blinded, randomized trial was conducted at 51 centres in the USA, the Netherlands, Canada, and France. Intravascular ultrasonography and QCA were performed to assess coronary atherosclerosis at baseline and 3 (2-5) weeks after the last study infusion. Five hundred and seven patients were randomized; 417 and 461 had paired IVUS and QCA measurements, respectively. Patients were randomized to receive 6 weekly infusions of placebo, 3 mg/kg, 6 mg/kg, or 12 mg/kg CER-001. The primary efficacy parameter was the nominal change in the total atheroma volume. Nominal changes in per cent atheroma volume on IVUS and coronary scores on QCA were also pre-specified endpoints. The nominal change in the total atheroma volume (adjusted means) was -2.71, -3.13, -1.50, and -3.05 mm(3) with placebo, CER-001 3 mg/kg, 6 mg/kg, and 12 mg/kg, respectively (primary analysis of 12 mg/kg vs. placebo: P = 0.81). There was also no difference among groups for the nominal change in per cent atheroma volume (0.02, -0.02, 0.01, and 0.19%; nominal P = 0.53 for 12 mg/kg vs. placebo). Change in the coronary artery score was -0.022, -0.036, -0.022, and -0.015 mm (nominal P = 0.25, 0.99, 0.55), and change in the cumulative coronary stenosis score was -0.51, 2.65, 0.71, and -0.77% (compared with placebo, nominal P = 0.85 for 12 mg/kg and nominal P = 0.01 for 3 mg/kg). The number of patients with major cardiovascular events was 10 (8.3%), 16 (13.3%), 17 (13.7%), and 12 (9.8%) in the four groups. CER-001 infusions did not reduce coronary atherosclerosis on IVUS and QCA when compared with placebo. Whether CER-001 administered in other regimens or to other

  13. Sustancias maleables en el proceso de la escultura: pastas cerámicas

    OpenAIRE

    Cambra Antón, Marta de

    2016-01-01

    Esta tesis se basa en la obtención de pastas cerámicas nuevas, mediante el estudio y la combinación de materias primas y otras sustancias que respondan a unas características predeterminadas para ser utilizadas en la creación de la obra artística. Dichas pastas se forman al introducir en las arcillas otras materias que sirven para corregir los defectos que se producen en el moldeado, en el secado o en la cocción. Esta tesis pretende ser un archivo de arcillas sintéticas, testadas y documenta...

  14. Estabilidad del color de las cerámicas de disilicato de litio.

    OpenAIRE

    Cedeño Salazar, Rosario

    2016-01-01

    La gran demanda de tratamientos estéticos por parte de los pacientes, supone un reto para los rehabilitadores orales, por lo que siempre están en búsqueda del material ideal. Las cerámicas dentales, poseen características que le permiten mimetizar la apariencia de los dientes naturales, por sus propiedades físicas y químicas, las cuales dependen de su composición. Poseen una fase vítrea que le aporta características estéticas y una fase cristalina que le aporta propiedades mecánicas. Clín...

  15. The potentional of renewable energy sources for greenhouse gases emissions reduction in Macedonia

    Directory of Open Access Journals (Sweden)

    Dedinec Aleksandar

    2012-01-01

    Full Text Available As European Union (EU candidate country, Macedonia is in the process of adoption of the EU strategic energy policies, harmonization of the national legislation with the EU legislation and defining the respective national goals. In this regard, the government has recently adopted a National Strategy for Utilization of Renewable Energy Sources (RES, prepared by ICEIM-MANU. The main goal of this paper is to assess the potential for greenhouse gases (GHG emissions reduction by implementation of 21%-RES-scenarios from the Strategy. The corresponding emissions reduction is calculated against the baseline (reference scenario developed within the Second National Communication on Climate Change. Furthermore, all potential RES technologies are analyzed from economic aspect and combined in a form of emissions reduction cost curve, displaying the total marginal cost of the GHG emissions reduction by RES. Finally, on the bases of the environmental and economic effectiveness of the considered RES technologies, as well as taking into account the country specific barriers, the priority actions for GHG emissions reduction are identified.

  16. Una nueva forma en la cerámica ibérica de San Miguel de Liria (Valencia

    Directory of Open Access Journals (Sweden)

    Domingo FLETCHER VALLS

    2009-10-01

    Full Text Available En la campaña de excavaciones llevadas a cabo en 1941, en el ya célebre poblado ibérico de San Miguel de Liria (Valencia, la Edeta de los textos clásicos, la suerte nos deparó, entre los abundantísimos materiales cerámicos, en el departamento señalado con el número 61, el hallazgo de un vaso de gran tamaño, fragmentado por la presión de las tierras, pero, afortunadamente, completo, lo que ha permitido su completa restauración, comprobándose una vez reconstruido, que se trata de una vasija de galbo único hasta la fecha, no sólo entre los múltiples que nos ha proporcionado este yacimiento sino en todo el conjunto de cerámicas ibéricas que conocemos, por lo que juzgamos de interés dar noticias de ia misma, anticipándonos a la completa publicación que de los vasos de este poblado tenemos en prensa.

  17. A Quantification of the Energy Savings by Conservation Voltage Reduction

    NARCIS (Netherlands)

    Ellens, W.; Berry, A.; West, S.

    2013-01-01

    The introduction of `Smart grid' technologies in the electricity supply industry has attracted new attention to Conservation Voltage Reduction (CVR). CVR is a method that aims to save energy by reducing the voltage level of the electrical distribution network. However, not all devices consume less

  18. On energy consumption for size-reduction and yields from subsequent enzymatic saccharification of pretreated lodgepole pine.

    Science.gov (United States)

    Zhu, W; Zhu, J Y; Gleisner, R; Pan, X J

    2010-04-01

    This study investigated the effects of chemical pretreatment and disk-milling conditions on energy consumption for size-reduction and the efficiency of enzymatic cellulose saccharification of a softwood. Lodgepole pine wood chips produced from thinnings of a 100-year-old unmanaged forest were pretreated by hot-water, dilute-acid, and two SPORL processes (Sulfite Pretreatment to Overcome Recalcitrance of Lignocellulose) at acid charge on oven dry (od) wood of 0% and 2.21%. The pretreated wood chips were then milled using a laboratory disk mill under various solids-loadings and disk-plate gaps to produce substrates for enzymatic hydrolysis. We found that post-chemical-pretreatment size-reduction of forest biomass can decrease size-reduction energy consumption by 20-80% depending on the pretreatment applied under 20% solids-loading and a disk-plate gap of 0.76 mm in milling. SPORL with a sodium bisulfite charge of 8% and sulfuric acid charge of 2.21% on wood was the most effective in decreasing size-reduction energy consumption. Solids-loading had the most significant effect on disk-milling energy. When solids-loading was reduced from 30% to 3%, disk-milling energy could be decreased by more than a factor of 10 for wood chips pretreated by both SPORL and dilute-acid at an acid charge of 2.21%. The enzymatic hydrolysis glucose yields (EHGY) from the substrates produced by all pretreatments were independent of the solids-loading in milling, indicating that these energy savings in size-reduction can be realized without affecting EHGY. When wood chips were pretreated by SPORL with 2.21% acid charge, size-reduction energy consumption was decreased to less than 50 Wh/kg od wood at a practical solids-loading of approximately 10-20%, equivalent to that used in size-reduction of agriculture biomass, with excellent EHGY of about 370 g per kg od wood. Similar effects on size-reduction energy savings and excellent EHGY were also achieved when large disk-plate gaps (up to 1.52 mm

  19. A Novel Four-Dimensional Energy-Saving and Emission-Reduction System and Its Linear Feedback Control

    Directory of Open Access Journals (Sweden)

    Minggang Wang

    2012-01-01

    Full Text Available This paper reports a new four-dimensional energy-saving and emission-reduction chaotic system. The system is obtained in accordance with the complicated relationship between energy saving and emission reduction, carbon emission, economic growth, and new energy development. The dynamics behavior of the system will be analyzed by means of Lyapunov exponents and equilibrium points. Linear feedback control methods are used to suppress chaos to unstable equilibrium. Numerical simulations are presented to show these results.

  20. Porcelanico Bionictile®: reducción selectiva de NOx ambiental con productos cerámicos esmaltados aditivados con una composición conteniendo dioxido de titanio y potenciadores.

    Directory of Open Access Journals (Sweden)

    Ros, J. L.

    2009-04-01

    Full Text Available The aim os this work is the obtention of a ceramic panel exposed to the solar illumination, able to redude due to their photocatalytic activity, the level of NOx in urban environments. Like to the nature behaviour the product in named as BIONICTILE®.El trabajo ha consistido en imitar en lo posible a la naturaleza (BIONICA utilizando como soporte a la cerámica que forma parte de elementos constructivos de exterior expuestos a la iluminación solar. De aquí el nombre de la gama de productos cerámicos que CERACASA propone al final de este estudio, denominados BIONICTILE®. El producto cerámico con actividad fotocatalítica implementado en materiales constructivos sería análogo a crear “bosques de azulejos” en las ciudades que reduzcan la contaminación y ayuden a purificar el aire.

  1. Socio-economic and Engineering Assessments of Renewable Energy Cost Reduction Potential

    Science.gov (United States)

    Seel, Joachim

    This dissertation combines three perspectives on the potential of cost reductions of renewable energy--a relevant topic, as high energy costs have traditionally been cited as major reason to vindicate developments of fossil fuel and nuclear power plants, and to justify financial support mechanisms and special incentives for renewable energy generators. First, I highlight the role of market and policy drivers in an international comparison of upfront capital expenses of residential photovoltaic systems in Germany and the United States that result in price differences of a factor of two and suggest cost reduction opportunities. In a second article I examine engineering approaches and siting considerations of large-scale photovoltaic projects in the United States that enable substantial system performance increases and allow thus for lower energy costs on a levelized basis. Finally, I investigate future cost reduction options of wind energy, ranging from capital expenses, operating expenses, and performance over a project's lifetime to financing costs. The assessment shows both substantial further cost decline potential for mature technologies like land-based turbines, nascent technologies like fixed-bottom offshore turbines, and experimental technologies like floating offshore turbines. The following paragraphs summarize each analysis: International upfront capital cost comparison of residential solar systems: Residential photovoltaic (PV) systems were twice as expensive in the United States as in Germany in 2012. This price discrepancy stems primarily from differences in non-hardware or "soft" costs between the two countries, of which only 35% be explained by differences in cumulative market size and associated learning. A survey of German PV installers was deployed to collect granular data on PV soft costs in Germany, and the results are compared to those of a similar survey of U.S. PV installers. Non-module hardware costs and all analyzed soft costs are lower in

  2. Reduction potentials of energy demand and GHG emissions in China's road transport sector

    International Nuclear Information System (INIS)

    Yan Xiaoyu; Crookes, Roy J.

    2009-01-01

    Rapid growth of road vehicles, private vehicles in particular, has resulted in continuing growth in China's oil demand and imports, which has been widely accepted as a major factor effecting future oil availability and prices, and a major contributor to China's GHG emission increase. This paper is intended to analyze the future trends of energy demand and GHG emissions in China's road transport sector and to assess the effectiveness of possible reduction measures. A detailed model has been developed to derive a reliable historical trend of energy demand and GHG emissions in China's road transport sector between 2000 and 2005 and to project future trends. Two scenarios have been designed to describe the future strategies relating to the development of China's road transport sector. The 'Business as Usual' scenario is used as a baseline reference scenario, in which the government is assumed to do nothing to influence the long-term trends of road transport energy demand. The 'Best Case' scenario is considered to be the most optimized case where a series of available reduction measures such as private vehicle control, fuel economy regulation, promoting diesel and gas vehicles, fuel tax and biofuel promotion, are assumed to be implemented. Energy demand and GHG emissions in China's road transport sector up to 2030 are estimated in these two scenarios. The total reduction potentials in the 'Best Case' scenario and the relative reduction potentials of each measure have been estimated

  3. Carbon Reduction Measures-Based LCA of Prefabricated Temporary Housing with Renewable Energy Systems

    Directory of Open Access Journals (Sweden)

    Ling Dong

    2018-03-01

    Full Text Available Temporary housing plays an important role in providing secure, hygienic, private, and comfortable shelter in the aftermath of disaster (such as flood, fire, earthquake, etc.. Additionally, temporary housing can also be used as a sustainable form of on-site residences for construction workers. While most of the building components used in temporary housing can be manufactured in a plant, prefabrication technology improves the production efficiency of temporary housing; furthermore, integrated renewable energy systems, for example, solar photovoltaic (PV system, offer benefits for temporary housing operations. In order to assess the environmental impacts of prefabricated temporary housing equipped with renewable energy systems, this study first divides the life cycle of temporary housing into six stages, and then establishes a life cycle assessment (LCA model for each stage. Furthermore, with the aim of reducing the environmental impacts, life cycle carbon reduction measures are proposed for each stage of temporary housing. The proposed methodology is demonstrated using a case study in China. Based on the proposed carbon reduction measures, the LCA of a prefabricated temporary housing case study building equipped with renewable energy systems indicates a carbon emissions intensity of 35.7 kg/m2·per year, as well as a reduction in material embodied emissions of 18%, assembly emissions of 17.5%, and operational emissions of 91.5%. This research proposes a carbon reduction-driven LCA of temporary housing and contributes to promoting sustainable development of prefabricated temporary housing equipped with renewable energy systems.

  4. Cerámicas a torno pintadas andaluzas de la segunda Edad del Hierro

    OpenAIRE

    Escacena Carrasco, José Luis

    1986-01-01

    El estudio de las vajillas cerámicas de las culturas antiguas desde el punto de vista puramente tipológico se ha revelado, a pesar de su aridez, como una de las bases fundamentales para iniciar investigaciones de otra índole referidas a los grupos humanos que las utilizaron. En este sentido, y por lo que se refiere a la Península Ibérica, todavía muchas de sus etapas pre y prohistóricas, además de otros momentos más recientes qu...

  5. La industria cerámica en España (1990-2000

    Directory of Open Access Journals (Sweden)

    Criado, E.

    2001-12-01

    Full Text Available The Spanish glass and ceramic industry reached in 2000 a record production value figure of 1.6 billion* pesetas (10.000 M euros, almost 1,5 % of the GDP, which places Spain after Italy as the UE country in which those sectors are the most important in terms of value of all the industrial activity. All together both sectors employ more than 110 000 in around 3 000 companies, with a distinct regional distribution according to sectors and specific products. Excellent raw materials, research and development network, skilled labour force, energetic efficiency, world-wide strong marketing policy and the drive of the internal demand, has turned the Spanish ceramic as a worldwide leading sector.

    La industria española de la cerámica y el vidrio alcanzó en el año 2000 un valor récord de la producción, con 10 000 Meuro (1,6 billones de ptas, casi el 1,5% del PIB. Esta cifra sitúa a España, junto con Italia, a la cabeza de los países de la UE por el peso que representan dichos sectores en el conjunto de la actividad industrial. Estas industrias dan empleo a más 110 000 personas, distribuidas en cerca de 3000 empresas y presentan una clara especialización regional en función de los diferentes sectores y productos. Excelentes materias primas, una amplia red de centros de investigación y desarrollo, personal experto, eficiencia energética, una poderosa política de ventas en todo el mundo y el empuje de la demanda interna ha convertido al sector cerámico español en un líder mundial.

  6. Recubrimientos por PVD decorativos sobre cerámicas

    Directory of Open Access Journals (Sweden)

    García, J. A.

    2006-08-01

    Full Text Available During the last years PVD coatings has been used for decorative purposes on ceramics and other substrates. Standards layers like TiN, CrN, TiCN, etc, give us the possibly of obtaining a wide range of colours, with a good mechanical, chemical properties. This paper gathers the works carried out in the Center of Advance Surface engineering of AIN during the three last years in the field of the decorative coatings. Different layer have been deposited by means of a METAPLAS 232 PVD equipment. A complete chemical and mechanical characterisation have been carried out on the different deposited layers like ultramicroindentation, scratch tests, wear resistance and GDOES.

    En los últimos años se ha venido estudiado la aplicabilidad de las técnicas de depósitos mediante métodos físicos en fase vapor (PVD, para la realización de recubrimientos sobre cerámicas y otros substratos con fines decorativos. Los recubrimientos estándar por PVD como el TiN, CrN, TiCN, etc, ofrecen la posibilidad de conseguir acabados de apariencia metálica, de una amplia gama de colores, y con buenas propiedades mecánicas y químicas, como resistencia a la abrasión, estabilidad térmica, o resistencia a la corrosión. En este trabajo se recogen las experiencias realizadas en el recubrimiento y caracterización de cerámicas decorativas, durante los tres últimos años, en el Centro de Ingeniería de Superficies de la Asociación de la Industria Navarra. Los distintos tipos de recubrimientos se han realizado mediante un equipo de PVD modelo METAPLAS 232, con seis evaporadores de arco eléctrico y sistema de limpieza iónica patentado AEGD. Los recubrimientos han sido caracterizados, tanto química como mecánicamente, empleando las más modernas técnicas tribológicas (ultramicrodureza, scrascth tests, resistencia al desgaste... y espectroscópicas óptica por descarga luminiscente (GDOES. Los resultados obtenidos muestran que las técnicas de PVD son una

  7. 75 FR 66008 - Fossil Fuel-Generated Energy Consumption Reduction for New Federal Buildings and Major...

    Science.gov (United States)

    2010-10-27

    ... Fossil Fuel-Generated Energy Consumption Reduction for New Federal Buildings and Major Renovations of Federal Buildings; Correction AGENCY: Office of Energy Efficiency and Renewable Energy, Department of... the fossil fuel- generated energy consumption [[Page 66009

  8. O uso de técnica eletroquímica para a descontaminação de estruturas cerâmicas vítreas porosas

    OpenAIRE

    Assis,O. B. G.; Silva,E. R.

    2010-01-01

    Apresentamos neste trabalho os resultados de ensaios preliminares para avaliar o uso de técnica de eletro-osmose para a remoção de contaminantes orgânicos em estruturas porosas cerâmicas, como filtros ou similares. A técnica consiste em forçar a migração de contaminantes retidos na estrutura interna ou na superfície dos poros por meio da aplicação de tensão controlada em célula eletroquímica projetada para este fim. As moléculas absorvidas na superfície cerâmica estarão sujeitas as ações cisa...

  9. Estudo da influência da adição de cinzas de carvão mineral nas propriedades da cerâmica vermelha

    OpenAIRE

    Zanin,T. L.; Klitzke,W.; Luz Jr.,L. F. L.

    2013-01-01

    A adição de resíduos industriais em cerâmicas vermelhas tem sido o alvo de diversos estudos, onde se busca uma destinação final adequada ao resíduo e melhoria das características da cerâmica. Neste trabalho, avaliou-se a adição de cinzas leves de carvão mineral oriundas de uma usina termelétrica existente em Figueira, PR. Foram preparadas misturas de 0, 10, 20, 30, 40 e 50% de cinzas em argila e produzidos corpos de prova de 6 cm x 2 cm x 0,5 cm por calcinação a 950 ºC. Avaliou-se os parâmetr...

  10. Comparação tecnológica, mineralógica e química da Formação Corumbataí em dois polos cerâmicos distintos visando sua aplicação na indústria de revestimentos cerâmicos

    Directory of Open Access Journals (Sweden)

    S. R. Christofoletti

    2015-12-01

    Full Text Available Resumo No presente trabalho foram estudadas as variações tecnológicas, químicas, mineralógicas e cerâmicas da Formação Corumbataí em três seções geológicas de dois polos cerâmicos distintos no estado de S. Paulo, Tambaú/Porto Ferreira (T/PF e Santa Gertrudes (SG, com intuito de entender as variações que ocorrem nestas matérias primas buscando a diversificação de produtos. Para estudar estas variações, a metodologia empregada constou do levantamento de seções geológicas, análise mineralógica por difração de raios X na sua constituição total e menor que 2 μm, caracterização geoquímica para identificação dos principais elementos por ICP OES/MS e caracterização cerâmica para revestimento. Os resultados mineralógicos e químicos encontrados refletiram diretamente nos característicos cerâmicos obtidos. O sódio, elemento fundente encontrado principalmente no feldspato sódico, é mais abundante nas seções do Polo SG do que nas seções do PoloT/PF; este elemento age durante a sinterização em conjunto com o K das illitas, porém no Polo T/PF o conteúdo de feldspato potássico é maior que em SG; sendo assim, o K disponível pode ser menor. Além dos argilominerais do grupo illita, presente em todas as amostras, foram identificados argilominerais do grupo das esmectitas e caulinitas. De acordo com os resultados dos ensaios cerâmicos, as amostras das seções P-4 e P-11 do Polo T/PF foram classificadas dentro do grupo de absorção de água como BIII (poroso, sendo sua aplicação mais usual na produção de revestimentos com alta porosidade, azulejos e pastilhas, ou na formulação de revestimento pelo processo via seca e via úmida. Já nas amostras da seção P-19 do Polo SG, os resultados obtidos enquadraram-se dentro do grupo BIb, BIIb e BIII possibilitando sua aplicação, principalmente no caso do BIb e BIIb, na produção de revestimento pelo processo via seca ou na composição de massas para a

  11. A comprehensive analysis of China's regional energy saving and emission reduction efficiency: From production and treatment perspectives

    International Nuclear Information System (INIS)

    Wu, Jie; Lv, Lin; Sun, Jiasen; Ji, Xiang

    2015-01-01

    Energy and environmental issues have recently aroused increasing interest in China and many approaches are used to evaluate energy and environmental performance. In this paper, a two-stage network DEA framework is applied to evaluate the efficiency of energy saving and emission reduction in China during the period of the eleventh five-year plan, from 2006 to 2010. In this study, economic activities are divided into production and treatment processes. This is different from previous research which generally focused on either environmental efficiency or energy efficiency, omitting the integration of energy and environmental measures. Today, energy saving and emission reduction are both parts of the basic state policy of China and are equally important. The empirical results in this study show that: (i) eastern China has the best energy saving and emission reduction efficiency, performing is better than western and central China. (ii) The efficiency of the production process in central China is better than that in western China while the western area performs better than the central area in term of treatment efficiency. (iii) Integrated efficiency of energy saving and emission reduction of China was relatively stable in the five years and the pollution treatment efficiency maintained a rising trend. -- Highlights: •We measured China's regional energy saving and emission reduction efficiency using two-stage DEA approach. •The production and treatment processes are incorporated in evaluation. •Eastern China performs best in terms of energy saving and emission reduction efficiency. •Integrated efficiency of energy saving and emission reduction of China kept a stable trend during 2006–2010

  12. Peak power reduction and energy efficiency improvement with the superconducting flywheel energy storage in electric railway system

    Science.gov (United States)

    Lee, Hansang; Jung, Seungmin; Cho, Yoonsung; Yoon, Donghee; Jang, Gilsoo

    2013-11-01

    This paper proposes an application of the 100 kWh superconducting flywheel energy storage systems to reduce the peak power of the electric railway system. The electric railway systems have high-power characteristics and large amount of regenerative energy during vehicles’ braking. The high-power characteristic makes operating cost high as the system should guarantee the secure capacity of electrical equipment and the low utilization rate of regenerative energy limits the significant energy efficiency improvement. In this paper, it had been proved that the peak power reduction and energy efficiency improvement can be achieved by using 100 kWh superconducting flywheel energy storage systems with the optimally controlled charging or discharging operations. Also, economic benefits had been assessed.

  13. Pollution prevention through energy efficiency: methodology for evaluating greenhouse gas reductions

    International Nuclear Information System (INIS)

    Widge, V.; Arnold, F.; Karmali, A.

    1992-01-01

    This paper outlines an analytical framework for evaluating the potential for greenhouse gas emission reductions through investments in energy efficiency. In particular, it will describe a model called the Energy and Technology Switching (ETS) model which has been developed at ICF Incorporated. The ETS model has several useful capabilities - it can assess the implications of changing the energy efficiency of new shipments and existing stock of equipment and appliances, or even changes in patterns of fuel use. The ETS model predicts energy use, emissions of related carbon dioxide and other greenhouse gases, and private and social costs (such as energy costs, avoided capital and fuel costs). It also tracks changes in fuel and technology use over time for a user specified end-use application. The paper is organized into three parts: - The first part of the paper describes the methodology used in estimating the reduction in greenhouse gas emissions and the associated net costs of policies that could affect energy use. - In order to demonstrate the model's capabilities, in the second part of the paper, a sample analysis is presented. ICF incorporated has used the ETS model to estimate for the Global Change Division of the U.S. Environmental Protection Agency the costs of reducing greenhouse gas emissions in the residential and commercial sectors of the U.S. economy, encompassing a wide range of technologies and fuel-types. The assumptions and results of this analysis are presented. - Finally, the paper outlines some of the potential uses of this model in assessing pollution prevention opportunities through energy efficient measures. 11 figs

  14. Materias para la industria cerámica española. Situación actual y perspectivas

    Directory of Open Access Journals (Sweden)

    Sánchez, E.

    2006-02-01

    Full Text Available The ceramics and glass industry in Spain has witnessed spectacular growth in recent years – particularly in the latter half of the 1990s – in products such as ceramic tiles, bricks and roofing tiles, driven by the building boom in Spain. However, at the start of the 21st century, growth has clearly flattened, owing to the emergence of production hubs in China, Brazil and Asian-Pacific countries. Raw materials have played a critical role in this new scenario, owing their impact on final product cost. With a view to analysing this role the present study first describes the principal raw materials used in ceramics and glass compositions, briefly indicating the functions of these raw materials. The study then reviews the evolution of raw materials consumption and prices in a strongly globalised business context, and seeks to identify the causes of certain mismatches between supply and demand. Finally, the challenges facing raw materials supply are discussed, particularly in regard to sustainable development of resources, threats and advantages of the global market, and research and development of new materials.

    Los datos de la industria cerámica y vidriera en España muestran un espectacular crecimiento que tuvo lugar principalmente en la segunda mitad de los 90, en particular en productos relacionados con la construcción, como baldosas cerámicas o ladrillos y tejas, impulsados por una frenética actividad en este sector industrial en España. Sin embargo, con el comienzo de siglo, el modelo cerámico español muestra claros síntomas de agotamiento, como consecuencia del gran aumento de la producción en China, Brasil y países de la zona Asia-Pacífico. Las materias primas, por su gran incidencia en el coste final del producto, han jugado y jugarán un decisivo papel en este nuevo escenario. Para analizar este rol, en el presente trabajo se ha comenzado por describir las principales materias primas que intervienen en la formulaci

  15. Validación de nuevos materiales cerámicos a partir de rocas de desecho de minería. Propiedades mecánicas

    Directory of Open Access Journals (Sweden)

    Durán Suárez, J. A.

    2014-12-01

    Full Text Available New ceramic materials obtained from tungsten mining wastes, from region of Beira Interior in Portugal, with no commercial use, responsible for landscape and environmental problems are presented. These preshaped new ceramic products, prepared in a wide thermal range (800 °C to 1300 °C was evaluated by mechanical test, but also was characterized the starting raw materials: tungsten wastes mining and industrial kaolin. Results, which also include a mineralogical characterization of ceramic products and morphologic evaluation of neoformed by scanning electron microscopy, show firstly, the feasibility of converting a large number of these wastes in marketable ceramics. Thanks to the experimentation carried out, the ability to generate ceramic materials is emphasized, without the presence of mineral clay, due to the particular composition of these waste of mining with content of acid, neutral and basic oxides.Se presentan nuevos materiales cerámicos obtenidos a partir de residuos de minería de tungsteno que son extraídos en la región de Beira Interior en Portugal, con nulo aprovechamiento comercial a la par que provocan graves problemas paisajísticos y medioambientales. Los nuevos productos cerámicos, preparados en un amplio rango térmico (desde 800 ºC a 1300 ºC han sido evaluados mediante ensayos mecánicos principalmente, aunque también han sido caracterizadas las materias primas de partida: restos de minería de tungsteno y caolín industrial, con los que han sido conformados. Los resultados, que incluyen también una caracterización mineralógica de los productos cerámicos y evaluación morfológica de neoformados mediante microscopía electrónica de barrido, ponen de manifiesto, en primer lugar, la factibilidad de transformar un gran número de estos residuos en productos cerámicos comercializables. Gracias a la experimentación realizada, se puede obtener una pasta industrial con 90 % de residuo sin modificar dramáticamente sus

  16. Aerojet Energy Conversion Company mobile volume reduction system

    International Nuclear Information System (INIS)

    Smith, K.R.

    1984-01-01

    Over the past few years, rapidly increasing costs for the disposal of low level radioactive waste (LLW) have generated the need for utilities to volume-reduce their LLW prior to shipment and burial. Incineration systems have been selected by several utilities to fulfill this need for maximum volume reduction. Until recently, all of the incineration systems selected by utilities were designed to be housed and operated in a facility erected by the utility. Now, however, lack of capital and rising design/erection costs are causing utilities to reevaluate their plans for purchasing incineration systems to process their LLW. The result is a growing demand for incineration services. Once again, Commonwealth Edison Company (Com-Ed) is leading the industry with an ongoing program to utilize incineration services provided by Aerojet Energy Conversion Company (AECC) for the Dresden Quad Cities, LaSalle, and Zion Nuclear Stations. At the stations, combustible dry active waste and contaminated oil will be processed in a Mobile Volume Reduction System (MVRS) designed and fabricated by AECC. The MVRS is a totally self-contained system consisting of a controlled-air incinerator and a liquid offgas cleanup system. No buildings are required to house the system, and the MVRS achieves volume reduction factors similar to systems currently available for permanent in-plant installation. The result is an option for the utility having the benefits of volume reduction without the capital commitment normally required by the utility

  17. Consumo de energía térmica y emisiones de dióxido de carbono en la fabricación de baldosas cerámicas Análisis de las industrias Española y Brasileña

    Directory of Open Access Journals (Sweden)

    Monfort, E.

    2012-10-01

    Full Text Available Spain and Brazil are two of the world’s biggest ceramic tile producers. The tile manufacturing process consumes a great quantity of thermal energy that, in these two countries, is mainly obtained from natural gas combustion, which entails CO2 emission, a greenhouse gas. This study presents a comparative analysis of the thermal energy consumption and CO2 emissions in the ceramic tile manufacturing process in Spain and Brazil, in terms of the different production technologies and different products made. The energy consumption and CO2 emissions in ceramic tile manufacture by the wet process are very similar in both countries. In the dry process used in Brazil, less thermal energy is consumed and less CO2 is emitted than in the wet process, but it is a process that is only used in manufacturing one particular type of product, which exhibits certain technical limitations. While in Spain the use of cogeneration systems in spray-dryers improves significantly the global energy efficiency. The average energy consumption in the different process stages, in both countries, lies within the range indicated in the Reference Document on Best Available Techniques in the Ceramic Manufacturing Industry (BREF of the Ceramic Manufacturing Industry of the European Union.

    España y Brasil son dos de los mayores productores de baldosas cerámicas en el mundo. El proceso de fabricación de baldosas consume gran cantidad de energía térmica, y en estos dos países se obtiene principalmente de la combustión de gas natural, lo que conlleva la emisión a la atmósfera de CO2, gas de efecto invernadero. El objetivo del trabajo presentado es mostrar comparativamente los consumos de energía térmica y las emisiones de CO2 en el proceso de obtención de baldosas cerámicas en España y en Brasil, atendiendo a las diferentes tecnologías de producción y a los distintos productos fabricados. El

  18. Sensitivity analysis of weight reduction results of an observational cohort study in overweight and obese children and adolescents in Germany: the EvAKuJ Study

    Directory of Open Access Journals (Sweden)

    Thomas Böhler

    2013-10-01

    Full Text Available In the German EvAKuJ observational cohort study, changes in the body mass index standard deviation score (BMI-SDS of overweight and obese children and adolescents as primary outcome of multimodal (short, inpatient or long, outpatient weight-loss interventions are difficult to interpret. Published intention-to-treat (ITT and per protocol data obtained at the end of the intervention (T1, one year (T2, and two years (T3 after its end were used for sensitivity analysis of treatment success rates. The odds ratio and the number needed to treat (NNT for BMI-SDS reduction of at least −0.2 (successful treatment and at least −0.5 (good treatment success were related to spontaneous BMI-SDS reduction rates in a hypothetical control group (control event rate, CER. At T1, treatment seems to be effective up to a CER of 10% in inpatients and of 5% in outpatients. ITT analysis, compromised by a loss to follow-up of 81 to 90% (inpatients and 57 to 66% (outpatients, indicated that treatment may become less effective at a CER above 1% in inpatients (e.g., successful treatment at T2: NNT=106, at T3: NNT=51, and above 5% in outpatients (successful treatment at T2: NNT=7, at T3: NNT=8; good treatment success at T2 and T3: NNT=25. Positive short-term effects of inpatient treatment of overweight and obese children and adolescents may not be maintained in the long term. Long-term effectiveness of outpatient treatment may depend on age and the degree of overweight.

  19. Complementary contrast media for metal artifact reduction in dual-energy computed tomography.

    Science.gov (United States)

    Lambert, Jack W; Edic, Peter M; FitzGerald, Paul F; Torres, Andrew S; Yeh, Benjamin M

    2015-07-01

    Metal artifacts have been a problem associated with computed tomography (CT) since its introduction. Recent techniques to mitigate this problem have included utilization of high-energy (keV) virtual monochromatic spectral (VMS) images, produced via dual-energy CT (DECT). A problem with these high-keV images is that contrast enhancement provided by all commercially available contrast media is severely reduced. Contrast agents based on higher atomic number elements can maintain contrast at the higher energy levels where artifacts are reduced. This study evaluated three such candidate elements: bismuth, tantalum, and tungsten, as well as two conventional contrast elements: iodine and barium. A water-based phantom with vials containing these five elements in solution, as well as different artifact-producing metal structures, was scanned with a DECT scanner capable of rapid operating voltage switching. In the VMS datasets, substantial reductions in the contrast were observed for iodine and barium, which suffered from contrast reductions of 97% and 91%, respectively, at 140 versus 40 keV. In comparison under the same conditions, the candidate agents demonstrated contrast enhancement reductions of only 20%, 29%, and 32% for tungsten, tantalum, and bismuth, respectively. At 140 versus 40 keV, metal artifact severity was reduced by 57% to 85% depending on the phantom configuration.

  20. Reduction of firewood consumption by households in south-central Chile associated with energy efficiency programs

    International Nuclear Information System (INIS)

    Schueftan, Alejandra; González, Alejandro D.

    2013-01-01

    Cities in the central-southern area of Chile face serious environmental pollution due to extensive use of firewood for heating. Low energy efficiency of constructions and cold climate increase the problem, which also affects native forests. The aims of this study are to characterize energy consumption in dwellings of this region, investigate the reduction potential, and study social and environmental consequences of high consumption of firewood. Actual energy consumption is studied with information from surveys, potential for reduction is modeled with software and other consequences are analyzed from previous studies. Results for the city of Valdivia show high firewood consumption per household, with a media bulk volume near 12 m 3 /year. Thermal regulations are softer compared with other countries. Moreover, around 85% of buildings were built before enforcing codes in 2007, and has almost no thermal protection. The reduction potential due to thermal improvements is found to be very high (62%) if buildings are refurbished to comply with the present Chilean Norm of 2007, but it reaches a 77% reduction if refurbished according to stricter foreign regulations. Therefore, an energy efficiency program strongly addressing existing buildings has the largest potential for reducing firewood use, and therefore mitigate environmental and health impacts. - Highlights: • High firewood consumption and environmental pollution in cities of south-central Chile. • High use of firewood due to inefficient constructions and soft thermal regulations. • Potential reduction of energy consumption up to 77% with more demanding regulations. • Policies should address building stock before thermal regulation, corresponding to 85%

  1. Biomineralización en cerámicas nanoestructuradas de aluminato de cinc

    OpenAIRE

    Álvarez-Pérez, M.A.; García-Hipólito, M.; de la Fuente-Hernández, J.; Suárez-Franco, J.L.; Juárez-Islas, J.A.; Álvarez-Fregoso, O.

    2010-01-01

    Las cerámicas nanoestructuradas en película delgada se han propuesto como una nueva opción de recubrimientos en implantes ortopédicos y dentales. Con esto en mente, se realizó un estudio para investigar el efecto de la nanotopografía en el proceso de biomineralización por medio de la preparación de películas delgadas con base en el aluminato de cinc con morfología nanométrica por el método de rocío pirolítico. Los resultados obtenidos al cultivar células osteoblásticas en las nanocerámicas, i...

  2. Urban passenger transport energy saving and emission reduction potential: A case study for Tianjin, China

    International Nuclear Information System (INIS)

    Peng, Binbin; Du, Huibin; Ma, Shoufeng; Fan, Ying; Broadstock, David C.

    2015-01-01

    Highlights: • Potential to reduce urban passenger transport is projected between 2010 and 2040. • Four scenarios reflecting different policy mixes are considered. • The potential for energy conservation and emission reductions are obtained. • Vehicle population regulation is most effective in energy saving and reducing overall GHG. • Emission standards are the most effective measure to reduce pollutant emissions. - Abstract: With rapid growth of the vehicle population, urban passenger transport in China is largely responsible for increases in energy consumption, greenhouse gas (GHG) emissions, and also atmospheric pollutants (NO x , CO, HC, PM). In this paper, we first develop an urban passenger transport energy saving and emission reduction potential evaluation model using the “Long Range Energy Alternatives Planning (LEAP)” tool; and then take Tianjin city as an empirical case to evaluate the reduction potential of final energy consumption, GHG emissions and pollutants emissions of Tianjin’s urban passenger transport sector between 2010 and 2040 under four scenarios, i.e. BAU (business as usual) scenario, PP (the 12th five-year plan policy) scenario, CP (comprehensive policy) scenario and HP (hybrid policy of PP and CP) scenario. The results show that due to the public transport promotion, energy consumption and CO 2 emissions in 2040 can be reduced by 22% and 22.6% in the PP scenario, compared to BAU. The largest reductions in energy consumption, CO 2 and atmospheric pollutants emissions can be achieved under CP scenario, in which vehicle population regulation is the most effective to be implemented. Emissions standard regulation is the most effective measure to reduce atmospheric pollutant emissions in all the scenarios and green energy promotion is especially effective to reduce NO x and PM

  3. Síntese e caracterização da cerâmica PZT dopada com estrôncio e com nióbio e estrôncio

    OpenAIRE

    Gasparotto, Gisele [UNESP

    2002-01-01

    A cerâmica Titanato Zirconato de Chumbo, PZT, se destaca por suas notáveis características piezoelétricas, sendo candidata a várias aplicações tecnológicas como transdutores, dispositivos ressonantes, entre outras, devido também a seu baixo custo e facilidade na fabricação (DESHPANDE, 1994). A adição de íons modificadores pode melhorar as propriedades da cerâmica, tornando-a mais eficiente. Inúmeros íons como nióbio (Nb+5) e estrôncio (Sr+2) podem ser usados para alterar parâmetros estruturai...

  4. O céu é o limite: como extrapolar as normas rígidas da cerâmica Guarani

    Directory of Open Access Journals (Sweden)

    Gislene Monticelli

    Full Text Available A cultura Guarani, entendida de modo generalizante, pode ser considerada como a manifestação de uma sociedade prescritiva, as análises e interpretações das vasilhas de cerâmica (ou os fragmentos destas, confeccionadas pelas ceramistas Guarani no passado, por um lado, demonstram um apego às normas estilísticas e às regras tecnológicas bem definidas. Alguns aspectos, como forma e função, foram fundamentais para que as vasilhas pudessem ser reconhecidas e assim tivessem a garantia de utilização adequada, seja em atividades cotidianas ou rituais ao longo do tempo. É possível encontrar alguns casos em que houve a modificação de aspectos, que demonstram a capacidade e a vontade das ceramistas em inovar. São ilustrados exemplos de inovações em uma coleção de fragmentos e vasilhas encontradas em sítio arqueológico às margens do rio Pelotas, na divisa dos estados do Rio Grande do Sul e Santa Catarina, ao final dos anos de 1990, por ocasião do salvamento do patrimônio ameaçado pelo impacto de um empreendimento de grande porte. A cerâmica obtida neste sítio demonstra uma autêntica 'fábrica de idéias'. Desta forma, acreditamos ser possível resgatar informações que são fundamentais na busca da compreensão da cerâmica guarani obtida em nossas pesquisas arqueológicas, ajudando a compreender o que a faz única e, ao mesmo tempo, tão diversa.

  5. Correlação entre permeabilidade e resistência mecânica de filtros cerâmicos no sistema Al2O3-SiC

    OpenAIRE

    Salvini,V. R.; Innocentini,M. D. M.; Pandolfelli,V. C.

    2000-01-01

    Tem sido crescente o uso de cerâmicas reticulares em processos de refino e purificação de metais fundidos, filtração de gases quentes e combustão catalítica. A aplicação depende da composição química e das propriedades físicas do material (número de poros por polegada linear (ppi), porosidade e diâmetro de poro). Há um consenso de que a melhoria das propriedades dos filamentos resulta em um melhor desempenho mecânico do filtro cerâmico. Entretanto, a análise dos valores de resistência mecânic...

  6. Cerámicas y sistemas para restauraciones CAD-CAM: una revisión

    OpenAIRE

    Caparroso Pérez, Carlos; Duque Vargas, Jaiver Andrés

    2010-01-01

    En la actualidad disponemos de muchos sistemas para hacer de restauraciones indirectas libres de metal, el de mayor actualidad y uso es el denominado CAD-CAM, cuyo diseño y elaboración son asistidas por un computador. Para la elaboración de una restauración por este método se deben seguir tres fases: digitalización de la preparación dental obtenida por medio de un escáner, diseño de la restauración lograda mediante de un programa de computador y maquinado de un bloque cerámico del cual se obt...

  7. Arcillas Wealdenses en Cantabria (N. de España: Su Aprovechamiento Cerámico

    Directory of Open Access Journals (Sweden)

    Díaz Rodríguez, L. A.

    2006-02-01

    Full Text Available Several clay sediments from the Weald facies (Barcena Mayor Formation, Vega de Pas Formation , including Upper Valanginian to Barremian belonging to the Pas Group (Lower Cretaceous Period from Cantabria (N. Spain have been studied . Fifty two samples were extracted from several outcroppings and granulometric, mineralogic and chemical analyses were carried out. Samples from the clay-rich zones were technologically characterized and the results indicate that they could be used as red stoneware ceramic products (facing bricks, roof, and floor tiles.

    Se investiga la caracterización cerámica de los materiales arcillosos existentes en Cantabria (N. de España pertenecientes a la facies Weald. Esta facies está englobada, dentro del Periodo Cretácico Inferior, en el denominado Grupo de Pas, que consta de dos formaciones: Formación Bárcena Mayor y Formación Vega de Pas (abarcando en Edad desde el Valanginiense Superior hasta el Barremiense. Las muestras tomadas (52 en total dentro de estas dos secuencias deposicionales fueron sometidas a su caracterización granulométrica, mineralógica y química, para posteriormente, en las zonas favorables, realizar los oportunos ensayos tecnológicos. Los resultados obtenidos confirman su excelente viabilidad para la fabricación de productos cerámicos de la construcción en los sectores de ladrillos caravista y tejas y, sobre todo, como pavimentos y revestimientos de pasta roja.

  8. Undertaking high impact strategies: The role of national efficiency measures in long-term energy and emission reduction in steel making

    International Nuclear Information System (INIS)

    Xu, Tengfang; Karali, Nihan; Sathaye, Jayant

    2014-01-01

    Highlights: • Evaluate long-term effects of national energy efficiency in steel making. • Use bottom-up optimization for projection in China, India and the U.S. • The effects include changes in steel production, energy use, emissions, and costs. • Three emission targets induce different structural changes and investments. • Projected energy and CO 2 intensity declines in each country from 2010 to 2050. - Abstract: In this paper, we applied bottom-up linear optimization modeling to analyze long-term national impacts of implementing energy efficiency measures on energy savings, CO 2 -emission reduction, production, and costs of steel making in China, India, and the U.S. We first established two base scenarios representing business-as-usual steel production for each country from 2010 to 2050; Base scenario (in which no efficiency measure is available) and Base-E scenario (in which efficiency measures are available), and model scenarios representing various emission-reduction targets that affects production, annual energy use and costs with the goal of cost minimization. A higher emission-reduction target generally induces larger structural changes and increased investments in nation-wide efficiency measures, in addition to autonomous improvement expected in the Base scenario. Given the same emission-reduction target compared to the base scenario, intensity of annual energy use and emissions exhibits declining trends in each country from year 2010 to 2050. While a higher emission-reduction target result in more energy reduction from the base scenario, such reduction can become more expensive to achieve. The results advance our understanding of long-term effects of national energy efficiency applications under different sets of emission-reduction targets for steel sectors in the three major economies, and provide useful implications for high impact strategies to manage production structures, production costs, energy use, and emission reduction in steel making

  9. Energy and environmental implications of carbon emission reduction targets: Case of Kathmandu Valley, Nepal

    International Nuclear Information System (INIS)

    Shrestha, Ram M.; Rajbhandari, Salony

    2010-01-01

    This paper analyzes the sectoral energy consumption pattern and emissions of CO 2 and local air pollutants in the Kathmandu Valley, Nepal. It also discusses the evolution of energy service demands, structure of energy supply system and emissions from various sectors under the base case scenario during 2005-2050. A long term energy system planning model of the Kathmandu Valley based on the MARKet ALlocation (MARKAL) framework is used for the analyses. Furthermore, the paper analyzes the least cost options to achieve CO 2 emission reduction targets of 10%, 20% and 30% below the cumulative emission level in the base case and also discusses their implications for total cost, technology-mix, energy-mix and local pollutant emissions. The paper shows that a major switch in energy use pattern from oil and gas to electricity would be needed in the Valley to achieve the cumulative CO 2 emission reduction target of 30% (ER30). Further, the share of electricity in the cumulative energy consumption of the transport sector would increase from 12% in the base case to 24% in the ER30 case.

  10. Storage of Renewable Energy by Reduction of CO2 with Hydrogen.

    Science.gov (United States)

    Züttel, Andreas; Mauron, Philippe; Kato, Shunsuke; Callini, Elsa; Holzer, Marco; Huang, Jianmei

    2015-01-01

    The main difference between the past energy economy during the industrialization period which was mainly based on mining of fossil fuels, e.g. coal, oil and methane and the future energy economy based on renewable energy is the requirement for storage of the energy fluxes. Renewable energy, except biomass, appears in time- and location-dependent energy fluxes as heat or electricity upon conversion. Storage and transport of energy requires a high energy density and has to be realized in a closed materials cycle. The hydrogen cycle, i.e. production of hydrogen from water by renewable energy, storage and use of hydrogen in fuel cells, combustion engines or turbines, is a closed cycle. However, the hydrogen density in a storage system is limited to 20 mass% and 150 kg/m(3) which limits the energy density to about half of the energy density in fossil fuels. Introducing CO(2) into the cycle and storing hydrogen by the reduction of CO(2) to hydrocarbons allows renewable energy to be converted into synthetic fuels with the same energy density as fossil fuels. The resulting cycle is a closed cycle (CO(2) neutral) if CO(2) is extracted from the atmosphere. Today's technology allows CO(2) to be reduced either by the Sabatier reaction to methane, by the reversed water gas shift reaction to CO and further reduction of CO by the Fischer-Tropsch synthesis (FTS) to hydrocarbons or over methanol to gasoline. The overall process can only be realized on a very large scale, because the large number of by-products of FTS requires the use of a refinery. Therefore, a well-controlled reaction to a specific product is required for the efficient conversion of renewable energy (electricity) into an easy to store liquid hydrocarbon (fuel). In order to realize a closed hydrocarbon cycle the two major challenges are to extract CO(2) from the atmosphere close to the thermodynamic limit and to reduce CO(2) with hydrogen in a controlled reaction to a specific hydrocarbon. Nanomaterials with

  11. Optimización energética en la fabricación de baldosas cerámicas mediante el uso de aceite térmico

    Directory of Open Access Journals (Sweden)

    Mezquita, A.

    2012-08-01

    Full Text Available The ceramic tile manufacturing process consumes a great amount of energy, mainly thermal energy, which is obtained from natural gas combustion. The increased cost of this fuel and the current economic situation make cost a critical issue that can hurt company competitiveness. The ceramic tile firing process in roller kilns does not exactly stand out for its energy efficiency, because about 50% of the energy input is lost through the kiln combustion flue gas and cooling gas stacks. With a view to improving the reuse of the energy consumed in the firing operation, two heat exchangers were installed in the stacks of a kiln. In these heat exchangers, the kiln gases transfer their sensible heat to a thermal oil that then passes this on, through two other exchangers, to the drying gases in the recirculation ducts of a vertical dryer. This study presents an experimental industrial plant in a fine-tuning test phase, in which the preliminary results indicate an energy efficiency improvement in a range of 60–90%, depending on the operating conditions and processed materials.

    El proceso de fabricación de baldosas cerámicas consume gran cantidad de energía, mayoritariamente energía térmica, que se obtiene de la combustión de gas natural. El incremento del coste de este combustible, así como la situación económica actual, hace que este coste sea crítico para las empresas y pueda mermar su competitividad. El proceso de cocción de las baldosas cerámicas en hornos de rodillos no destaca precisamente por el aprovechamiento de la energía utilizada, pues aproximadamente el 50 % se pierde a través de las chimeneas de humos y de enfriamiento del horno. Con el objetivo de mejorar el aprovechamiento de la energía consumida durante la operación de cocción se han instalado, en las chimeneas de un horno, dos intercambiadores de calor, en los cuales los gases procedentes del horno ceden su calor sensible a un aceite térmico, que

  12. Entalhamento de cerâmicas para medida de tenacidade à fratura pelo método SEVNB

    Directory of Open Access Journals (Sweden)

    S. Ribeiro

    2013-06-01

    Full Text Available O objetivo deste trabalho é apresentar uma máquina para entalhamento de corpos de prova cerâmicos, bem como a escolha e a execução do entalhamento, usando SiC sinterizado via fase líquida, com adições de Al2O3 e Yb2O3, como material experimental para ser entalhado. Foi desenvolvido e construído, junto a uma empresa de S. Carlos-SP, um equipamento que permite produzir entalhes finos em corpos cerâmicos para posterior ruptura, visando determinar K IC pelo método SEVNB. Amostras de SiC com 10% de Al2O3+Yb2O3 foram sinterizadas a 1950 ºC, retificadas e entalhadas com lâminas de barbear e pastas diamantadas de 15, 9, 6, 3, 1 e 0,25 µm. A máquina produzida para o entalhamento das amostras está em operação no DEMAR-EEL-USP e, ao que se sabe, é a primeira no Brasil. Os resultados mostraram que em função da espessura da lâmina e da granulometria do agente abrasivo, pode-se produzir entalhes com diferentes raios de curvatura de sua ponta e profundidades.

  13. Policymaking based on CERs: changes in costs are not the same as changes in benefits

    Directory of Open Access Journals (Sweden)

    Evers Silvia MAA

    2005-03-01

    Full Text Available Abstract Background Earlier cost-effectiveness studies showed the cost-effectiveness ratios for pneumococcal vaccination in preventing cases of Bacteremic Pneumococcal Disease (BPD alone to vary between € 11,000 and € 33,000 per quality-adjusted life year. If vaccination is also assumed to be effective in preventing cases of Non Bacteremic Pneumococcal Disease (NBPD (at the same level of effectiveness, vaccinating all elderly persons becomes highly cost-effective or even cost saving. Methods The present article examines the effect of partial preventive power of the vaccine against cases of NBPD additional to its preventive power against cases of BPD, and the consequences this has in terms of cost-effectiveness. Results The analysis shows that even a fairly small additional preventive power against cases of NBPD leads to a dramatic and unexpected decrease in the cost-effectiveness ratio. Conclusion Because a Cost-Effectiveness Ratio (CER is a ratio, changes in costs and changes in effects have rather different influences on its value. There is a linear relation between a change in costs and a change in CER if the effects are kept constant. This linear relation is not found on the effect side. Assuming that costs are constant, a change in effect will be different for low levels of effect than for high levels.

  14. SU-F-T-407: Artifact Reduction with Dual Energy Or IMAR: Who’s Winning?

    International Nuclear Information System (INIS)

    Elder, E; Schreibmann, E; Dhabaan, A

    2016-01-01

    Purpose: The purpose of this abstract was to evaluate the performance of commercial strategies for artifact reduction in radiation oncology settings. The iterative metal artifact reduction (Siemens iMAR) algorithm and monoenergetic virtual datasets reconstructed from dual energy scans are compared side-by-side in their ability to image in the presence of metal inserts. Methods: A CIRS ATOM Dosimetry Verification Phantom was scanned with and without a metal insert on a SOMATOM Definition AS dual energy scanner. Images with the metal insert were reconstructed with (a) a tradition single energy CT scan with the iMAR option implemented, using different artifact reduction settings and (b) a monoenergetic scan calculated from dual energy scans by recovering differences in the energy-dependence of the attenuation coefficients of different materials and then creating a virtual monoenergetic scan from these coefficients. The iMAR and monoenergetic scans were then compared with the metal-free scan to assess changes in HU numbers and noise within a region around the metal insert. Results: Both the iMAR and dual energy scans reduced artifacts produced by the metal insert. However the iMAR results are dependent of the selected algorithm settings, with a mean HU difference ranging from 0.65 to 90.40 for different options. The mean differences without the iMAR correction were 38.74. When using the dual energy scan, the mean differences were 4.53, that is however attributed to increased noise and not artifacts, as the dual energy scan had the lowest skewness (2.52) compared to the iMAR scans (ranging from 3.90 to 4.88) and the lowest kurtosis (5.72 for dual energy, range of 18.19 to 27.36 for iMAR). Conclusion: Both approaches accurately recovered HU numbers, however the dual energy method provided smaller residual artifacts.

  15. SU-F-T-407: Artifact Reduction with Dual Energy Or IMAR: Who’s Winning?

    Energy Technology Data Exchange (ETDEWEB)

    Elder, E; Schreibmann, E; Dhabaan, A [Department of Radiation Oncology and Winship Cancer Institute of Emory University Atlanta, GA (United States)

    2016-06-15

    Purpose: The purpose of this abstract was to evaluate the performance of commercial strategies for artifact reduction in radiation oncology settings. The iterative metal artifact reduction (Siemens iMAR) algorithm and monoenergetic virtual datasets reconstructed from dual energy scans are compared side-by-side in their ability to image in the presence of metal inserts. Methods: A CIRS ATOM Dosimetry Verification Phantom was scanned with and without a metal insert on a SOMATOM Definition AS dual energy scanner. Images with the metal insert were reconstructed with (a) a tradition single energy CT scan with the iMAR option implemented, using different artifact reduction settings and (b) a monoenergetic scan calculated from dual energy scans by recovering differences in the energy-dependence of the attenuation coefficients of different materials and then creating a virtual monoenergetic scan from these coefficients. The iMAR and monoenergetic scans were then compared with the metal-free scan to assess changes in HU numbers and noise within a region around the metal insert. Results: Both the iMAR and dual energy scans reduced artifacts produced by the metal insert. However the iMAR results are dependent of the selected algorithm settings, with a mean HU difference ranging from 0.65 to 90.40 for different options. The mean differences without the iMAR correction were 38.74. When using the dual energy scan, the mean differences were 4.53, that is however attributed to increased noise and not artifacts, as the dual energy scan had the lowest skewness (2.52) compared to the iMAR scans (ranging from 3.90 to 4.88) and the lowest kurtosis (5.72 for dual energy, range of 18.19 to 27.36 for iMAR). Conclusion: Both approaches accurately recovered HU numbers, however the dual energy method provided smaller residual artifacts.

  16. Energy-Saving Melting and Revert Reduction Technology (E-SMARRT): Final Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    White, Thornton C [SCRA Appiled R& D

    2014-03-31

    Energy-Saving Melting and Revert Reduction Technology (E-SMARRT) is a balanced portfolio of R&D tasks that address energy-saving opportunities in the metalcasting industry. E-SMARRT was created to: • Improve important capabilities of castings • Reduce carbon footprint of the foundry industry • Develop new job opportunities in manufacturing • Significantly reduce metalcasting process energy consumption and includes R&D in the areas of: • Improvements in Melting Efficiency • Innovative Casting Processes for Yield Improvement/Revert Reduction • Instrumentation and Control Improvement • Material properties for Casting or Tooling Design Improvement The energy savings and process improvements developed under E-SMARRT have been made possible through the unique collaborative structure of the E-SMARRT partnership. The E-SMARRT team consisted of DOE’s Office of Industrial Technology, the three leading metalcasting technical associations in the U.S: the American Foundry Society; the North American Die Casting Association; and the Steel Founders’ Society of America; and SCRA Applied R&D, doing business as the Advanced Technology Institute (ATI), a recognized leader in distributed technology management. This team provided collaborative leadership to a complex industry composed of approximately 2,000 companies, 80% of which employ less than 100 people, and only 4% of which employ more than 250 people. Without collaboration, these new processes and technologies that enable energy efficiencies and environment-friendly improvements would have been slow to develop and had trouble obtaining a broad application. The E-SMARRT R&D tasks featured low-threshold energy efficiency improvements that are attractive to the domestic industry because they do not require major capital investment. The results of this portfolio of projects are significantly reducing metalcasting process energy consumption while improving the important capabilities of metalcastings. Through June

  17. Avaliação da atividade pozolânica dos resíduos de cerâmica vermelha produzidos nos principais polos ceramistas do Estado de S. Paulo

    Directory of Open Access Journals (Sweden)

    E. Garcia

    2015-06-01

    Full Text Available Com intuito de se obter vantagens técnicas, econômicas e ambientais, vem se acentuando o interesse da indústria do cimento para adições minerais em substituição parcial ao clínquer no cimento Portland. Uma das adições minerais mais comuns e que vem ganhando espaço no mercado brasileiro corresponde à argila calcinada, que agrega basicamente as características de pozolanicidade aos seus produtos compostos. Um material com propriedades potencialmente similares às argilas calcinadas e ainda não aproveitado como pozolana no país refere-se aos resíduos da indústria de cerâmica vermelha (RCV. Este trabalho buscou aprofundar o conhecimento sobre as propriedades cimentícias dos RCV, focalizando-se as propriedades pozolânicas de oito amostras coletadas em cerâmicas representativas de quatro dos principais polos paulistas, e suas relações com as composições das matérias-primas utilizadas (massas cerâmicas e com a temperatura de queima. Os resíduos cerâmicos, após moagem controlada, mostraram-se adequados para a utilização como aditivo pozolânico para o cimento Portland. As amostras ensaiadas apresentaram um consumo médio de 500 mg de Ca(OH2/grama de amostra no Ensaio Chapelle, suplantando em 14,7% o valor mínimo normatizado. A máxima reatividade verificada situa-se na faixa de temperatura de queima entre 700 °C e 800 °C. Esse intervalo de maior reatividade corresponde aos patamares de queima usuais praticados nas empresas de cerâmica vermelha, o que corrobora com o potencial de aproveitamento de seus resíduos como adição mineral, fazendo com que o RCV possa constituir uma nova fonte de material pozolânico para o setor cimenteiro no país.

  18. Limited emission reductions from fuel subsidy removal except in energy-exporting regions

    Science.gov (United States)

    Jewell, Jessica; McCollum, David; Emmerling, Johannes; Bertram, Christoph; Gernaat, David E. H. J.; Krey, Volker; Paroussos, Leonidas; Berger, Loïc; Fragkiadakis, Kostas; Keppo, Ilkka; Saadi, Nawfal; Tavoni, Massimo; van Vuuren, Detlef; Vinichenko, Vadim; Riahi, Keywan

    2018-02-01

    Hopes are high that removing fossil fuel subsidies could help to mitigate climate change by discouraging inefficient energy consumption and levelling the playing field for renewable energy. In September 2016, the G20 countries re-affirmed their 2009 commitment (at the G20 Leaders’ Summit) to phase out fossil fuel subsidies and many national governments are using today’s low oil prices as an opportunity to do so. In practical terms, this means abandoning policies that decrease the price of fossil fuels and electricity generated from fossil fuels to below normal market prices. However, whether the removal of subsidies, even if implemented worldwide, would have a large impact on climate change mitigation has not been systematically explored. Here we show that removing fossil fuel subsidies would have an unexpectedly small impact on global energy demand and carbon dioxide emissions and would not increase renewable energy use by 2030. Subsidy removal would reduce the carbon price necessary to stabilize greenhouse gas concentration at 550 parts per million by only 2-12 per cent under low oil prices. Removing subsidies in most regions would deliver smaller emission reductions than the Paris Agreement (2015) climate pledges and in some regions global subsidy removal may actually lead to an increase in emissions, owing to either coal replacing subsidized oil and natural gas or natural-gas use shifting from subsidizing, energy-exporting regions to non-subsidizing, importing regions. Our results show that subsidy removal would result in the largest CO2 emission reductions in high-income oil- and gas-exporting regions, where the reductions would exceed the climate pledges of these regions and where subsidy removal would affect fewer people living below the poverty line than in lower-income regions.

  19. Limited emission reductions from fuel subsidy removal except in energy-exporting regions.

    Science.gov (United States)

    Jewell, Jessica; McCollum, David; Emmerling, Johannes; Bertram, Christoph; Gernaat, David E H J; Krey, Volker; Paroussos, Leonidas; Berger, Loïc; Fragkiadakis, Kostas; Keppo, Ilkka; Saadi, Nawfal; Tavoni, Massimo; van Vuuren, Detlef; Vinichenko, Vadim; Riahi, Keywan

    2018-02-07

    Hopes are high that removing fossil fuel subsidies could help to mitigate climate change by discouraging inefficient energy consumption and levelling the playing field for renewable energy. In September 2016, the G20 countries re-affirmed their 2009 commitment (at the G20 Leaders' Summit) to phase out fossil fuel subsidies and many national governments are using today's low oil prices as an opportunity to do so. In practical terms, this means abandoning policies that decrease the price of fossil fuels and electricity generated from fossil fuels to below normal market prices. However, whether the removal of subsidies, even if implemented worldwide, would have a large impact on climate change mitigation has not been systematically explored. Here we show that removing fossil fuel subsidies would have an unexpectedly small impact on global energy demand and carbon dioxide emissions and would not increase renewable energy use by 2030. Subsidy removal would reduce the carbon price necessary to stabilize greenhouse gas concentration at 550 parts per million by only 2-12 per cent under low oil prices. Removing subsidies in most regions would deliver smaller emission reductions than the Paris Agreement (2015) climate pledges and in some regions global subsidy removal may actually lead to an increase in emissions, owing to either coal replacing subsidized oil and natural gas or natural-gas use shifting from subsidizing, energy-exporting regions to non-subsidizing, importing regions. Our results show that subsidy removal would result in the largest CO 2 emission reductions in high-income oil- and gas-exporting regions, where the reductions would exceed the climate pledges of these regions and where subsidy removal would affect fewer people living below the poverty line than in lower-income regions.

  20. Fabricación y caracterización de membranas cerámicas tubulares para microfiltración

    Directory of Open Access Journals (Sweden)

    Marchese, J.

    2000-04-01

    Full Text Available A method to prepare and characterize different microfiltration ceramic membranes is described here. The membranes are composite and consist in a macroporous support, giving high mechanical resistance, onto which a thin microporous layer is deposited. This active film determines the retention properties of the membrane. Several versions of these membranes were prepared by controlling: particle size, chemical formulation of the paste and its thermal treatment. Both the support and the active layer were obtained from slips consisting in caolin, clay, feldespatum etc. The morphology of the active layer, support and composite membrane have been investigated by AFM (Atomic Force Microscopy and hydraulic permeabilities. Structural properties and permselectivity make these membranes appropriate to be efficiently used in microfiltration processes.

    En este trabajo se describe el método de preparación y la caracterización de diversas membranas cerámicas tubulares con utilidad en el campo de la microfiltración. Se trata de membranas compuestas formadas por un soporte macroporoso que le confiere resistencia mecánica y una capa delgada microporosa o superficie activa depositada sobre el soporte que es la que determina las características retentivas de la membrana. Se prepararon diversas versiones de estas membranas a partir de materias primas cerámicas controlando, entre otras, variables como: el tamaño de partículas, la formulación química de la pasta y su tratamiento térmico. El material del soporte y de la capa activa se obtiene a partir de barbotinas a base de caolín, arcilla, feldespato, alúmina, etc. La morfología estructural del soporte, capa activa y membrana compuesta se ha estudiado mediante técnicas de AFM (Microscopía de Fuerza Atómica y permeabilidades hidráulicas. Las propiedades estructurales y permeoselectivas de estas membranas cerámicas, hacen que sean apropiadas para procesos de microfiltración.

  1. Resistência à microtração entre uma cerâmica hidrotérmica, silanizada ou não, aderida à uma resina composta por um cimento resinoso

    OpenAIRE

    Lopes, Angela; Leite, Fabiola; Valandro, Luis Felipe; Siqueira, Luciana; Pimenta, Luiz André; Neisser, Maximiliano Piero

    2010-01-01

    Esse trabalho teve como objetivo avaliar a resistência adesiva entre uma cerâmica hidrotérmica (Symbio ceram, Degussa), silanizada ou não e aderida à uma resina composta (Filtec Z100- 3M ESPE) por um cimento resinoso (Panavia F, Kuraray). Foram confeccionados 2 blocos, divididos em 2 grupos assim constituídos: Grupo I-tratamento de superfície da cerâmica com ácido fluorídrico a 10% e união a um substrato (resina compost...

  2. Load Reduction, Demand Response and Energy Efficient Technologies and Strategies

    Energy Technology Data Exchange (ETDEWEB)

    Boyd, Paul A.; Parker, Graham B.; Hatley, Darrel D.

    2008-11-19

    The Department of Energy’s (DOE’s) Pacific Northwest National Laboratory (PNNL) was tasked by the DOE Office of Electricity (OE) to recommend load reduction and grid integration strategies, and identify additional demand response (energy efficiency/conservation opportunities) and strategies at the Forest City Housing (FCH) redevelopment at Pearl Harbor and the Marine Corps Base Hawaii (MCBH) at Kaneohe Bay. The goal was to provide FCH staff a path forward to manage their electricity load and thus reduce costs at these FCH family housing developments. The initial focus of the work was at the MCBH given the MCBH has a demand-ratchet tariff, relatively high demand (~18 MW) and a commensurate high blended electricity rate (26 cents/kWh). The peak demand for MCBH occurs in July-August. And, on average, family housing at MCBH contributes ~36% to the MCBH total energy consumption. Thus, a significant load reduction in family housing can have a considerable impact on the overall site load. Based on a site visit to the MCBH and meetings with MCBH installation, FCH, and Hawaiian Electric Company (HECO) staff, recommended actions (including a "smart grid" recommendation) that can be undertaken by FCH to manage and reduce peak-demand in family housing are made. Recommendations are also made to reduce overall energy consumption, and thus reduce demand in FCH family housing.

  3. Metal artefact reduction in gemstone spectral imaging dual-energy CT with and without metal artefact reduction software

    International Nuclear Information System (INIS)

    Lee, Young Han; Song, Ho-Taek; Kim, Sungjun; Suh, Jin-Suck; Park, Kwan Kyu

    2012-01-01

    To assess the usefulness of gemstone spectral imaging (GSI) dual-energy CT (DECT) with/without metal artefact reduction software (MARs). The DECTs were performed using fast kV-switching GSI between 80 and 140 kV. The CT data were retro-reconstructed with/without MARs, by different displayed fields-of-view (DFOV), and with synthesised monochromatic energy in the range 40-140 keV. A phantom study of size and CT numbers was performed in a titanium plate and a stainless steel plate. A clinical study was performed in 26 patients with metallic hardware. All images were retrospectively reviewed in terms of the visualisation of periprosthetic regions and the severity of beam-hardening artefacts by using a five-point scale. The GSI-MARs reconstruction can markedly reduce the metal-related artefacts, and the image quality was affected by the prosthesis composition and DFOV. The spectral CT numbers of the prosthesis and periprosthetic regions showed different patterns on stainless steel and titanium plates. Dual-energy CT with GSI-MARs can reduce metal-related artefacts and improve the delineation of the prosthesis and periprosthetic region. We should be cautious when using GSI-MARs because the image quality was affected by the prosthesis composition, energy (in keV) and DFOV. The metallic composition and size should be considered in metallic imaging with GSI-MARs reconstruction. circle Metal-related artefacts can be troublesome on musculoskeletal computed tomography (CT). circle Gemstone spectral imaging (GSI) with dual-energy CT (DECT) offers a novel solution circle GSI and metallic artefact reduction software (GSI-MAR) can markedly reduce these artefacts. circle However image quality is influenced by the prosthesis composition and other parameters. circle We should be aware about potential overcorrection when using GSI-MARs. (orig.)

  4. Impact of International Oil Price on Energy Conservation and Emission Reduction in China

    Directory of Open Access Journals (Sweden)

    Jian Chai

    2016-05-01

    Full Text Available In the context of “new normal” economy and frequent “haze”, the strategy of energy conservation and emission reduction aiming to lower costs and reduce pollution is currently still a major strategic direction in China and the world, and will remain so for some time in the future. This paper uses the annual data of West Texas Intermediate (WTI crude oil price in 1987–2014 as samples. We firstly present the direction and mechanism of the influence of oil price change on total consumption of every kind of energy by path analysis, and then consider establishing a Structural Vector Autoregression model of energy conservation and emission reduction in three statuses. Research shows that if the international oil price increases by 1%, the energy consumption per GDP and carbon dioxide emission increase by 0.092% and 0.053% respectively in the corresponding period. In the status of high energy consumption and high emission, if the international oil price increases by 1%, the energy consumption per GDP and carbon dioxide emission increase by 0.043% and 0.065% respectively in the corresponding period. In the status of low energy consumption and low emission, if the international oil price increases by 1%, the energy consumption per GDP per unit increases by 0.067% and carbon dioxide emission decreases by 0.085% in the corresponding period.

  5. Long-term energy savings and greenhouse gas emission reductions in the Swiss residential sector

    International Nuclear Information System (INIS)

    Siller, Thomas; Kost, Michael; Imboden, Dieter

    2007-01-01

    The aim of this paper is to explore the possibilities to reach two long-term targets regarding energy consumption and greenhouse gas emissions of the Swiss residential building stock: a reduction of the final energy consumption by a factor of 3 and of CO 2 emissions by a factor of 5 until 2050. A model is constructed to describe the dynamics of the energy-relevant properties of the residential building stock. Appropriate scenarios are discussed in terms of decisions made during construction or renovation of residential buildings which affect heat demand and determine the energy carriers used for heating and hot water generation. We show that both targets could be reached, although ambitious efforts are necessary. The central element of a successful strategy is to reduce the specific heat demand of existing buildings during renovation and to substitute the heating and hot water systems by less carbon intensive ones. Our results suggest that there is more flexibility to reach the emission target than the energy reduction target

  6. Peak power reduction and energy efficiency improvement with the superconducting flywheel energy storage in electric railway system

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hansang, E-mail: hslee80@kiu.ac.kr [School of Railway and Electrical Engineering, Kyungil University, Hayang-eup, Gyeongsan-si, Gyeongsangbuk-do 712-701 (Korea, Republic of); Jung, Seungmin [School of Electrical Engineering, Korea University, Anam-dong, Seongbuk-gu, Seoul 136-712 (Korea, Republic of); Cho, Yoonsung [Department of Electric and Energy Engineering, Catholic University of Daegu, Hayang-eup, Gyeongsan-si, Gyeongsangbuk-do 712-702 (Korea, Republic of); Yoon, Donghee [Department of New and Renewable Energy, Kyungil University, Hayang-eup, Gyeongsangbuk-do 712-701 (Korea, Republic of); Jang, Gilsoo, E-mail: gjang@korea.ac.kr [School of Electrical Engineering, Korea University, Anam-dong, Seongbuk-gu, Seoul 136-712 (Korea, Republic of)

    2013-11-15

    Highlights: •It is important to develop power and energy management system to save operating cost. •An 100 kWh of SFES is effective to decrease peak power and energy consumption. •Operation cost saving can be achieved using superconducting flywheel energy storage. -- Abstract: This paper proposes an application of the 100 kWh superconducting flywheel energy storage systems to reduce the peak power of the electric railway system. The electric railway systems have high-power characteristics and large amount of regenerative energy during vehicles’ braking. The high-power characteristic makes operating cost high as the system should guarantee the secure capacity of electrical equipment and the low utilization rate of regenerative energy limits the significant energy efficiency improvement. In this paper, it had been proved that the peak power reduction and energy efficiency improvement can be achieved by using 100 kWh superconducting flywheel energy storage systems with the optimally controlled charging or discharging operations. Also, economic benefits had been assessed.

  7. Peak power reduction and energy efficiency improvement with the superconducting flywheel energy storage in electric railway system

    International Nuclear Information System (INIS)

    Lee, Hansang; Jung, Seungmin; Cho, Yoonsung; Yoon, Donghee; Jang, Gilsoo

    2013-01-01

    Highlights: •It is important to develop power and energy management system to save operating cost. •An 100 kWh of SFES is effective to decrease peak power and energy consumption. •Operation cost saving can be achieved using superconducting flywheel energy storage. -- Abstract: This paper proposes an application of the 100 kWh superconducting flywheel energy storage systems to reduce the peak power of the electric railway system. The electric railway systems have high-power characteristics and large amount of regenerative energy during vehicles’ braking. The high-power characteristic makes operating cost high as the system should guarantee the secure capacity of electrical equipment and the low utilization rate of regenerative energy limits the significant energy efficiency improvement. In this paper, it had been proved that the peak power reduction and energy efficiency improvement can be achieved by using 100 kWh superconducting flywheel energy storage systems with the optimally controlled charging or discharging operations. Also, economic benefits had been assessed

  8. Estudo sobre a associação de cerâmica a plasma rico em plaquetas na coluna vertebral de ratos Study about fusion using ceramic with platelet-rich plasma in the spine of rats

    Directory of Open Access Journals (Sweden)

    Rita Delgado

    2009-01-01

    Full Text Available OBJETIVO: Analisar o efeito osteoindutor dos fatores de crescimento contidos no plasma rico em plaquetas (PRP quando associados a cerâmicas no processo de fusão na coluna vertebral de ratos. MATERIAL E MÉTODO: Laminectomia lombar foi realizada em 16 ratos Lewis isogênicos para implantar cerâmica. O PRP foi preparado no ato operatório a partir do sangue de outras duas cobaias.os grupos estudo e controle foram estabelecidos por randomização, recebendo o grupo estudo cerâmica associada a PRP e o controle apenas cerâmica. Os animais foram sacrificados após 10 semanas e as colunas enviadas para análise histopatológica. RESULTADOS: Intensa atividade osteoblástica e osteoclástica e completa reabsorção da cerâmica foram achados no grupo estudo. No grupo controle havia ilhotas de osso em meio a tecido fibroso e cerâmica não reabsorvida. Discussão: Os fatores de crescimento liberados pelas plaquetas agem ligando-se à superfície de osteoblastos e fibroblastos, estimulando a síntese de colágeno para formação de matriz óssea. macrófagos ativados continuam secretando os fatores de crescimento e estimulando a osteogênese. CONCLUSÃO: O uso de PRP associado a cerâmica mostrou maior atividade osteoblástica e osteoclástica e completa reabsorção da cerâmica em relação à enxertia da mesma isoladamente na coluna vertebral de ratos.OBJECTIVE: To assess the osteoinductive action of platelet-rich plasma when associated to ceramics in the spine of rats. MATERIAL AND METHOD: Laminectomy was performed in 16 isogenic Lewis rats for posterior ceramic grafting. PRP was prepared intraoperatively using blood collected from two other rats. Study and control groups were set by randomization, with the study group receiving ceramics associated to PRP, and the control group receiving only ceramics. The animals were sacrificed for histopathological analysis after 10 weeks. RESULTS: Strong osteoblastic and osteoclastic activity and full re

  9. Energy reduction in buildings in temperate and tropic regions utilizing a heat loss measuring device

    DEFF Research Database (Denmark)

    Sørensen, Lars Schiøtt

    2012-01-01

    There exist two ordinary ways to obtain global energy efficiency. One way is to make improvements on the energy production and supply side, and the other way is, in general, to reduce the consume of energy in the society. This paper has focus on the latter and especially the consume of energy...... for heating up, and cooling down our houses. There is a huge energy saving potential on this area reducing both the World climate problems and economy challenges as well. Heating of buildings in Denmark counts for approximately 40% of the entire national energy consume. Of this reason a reduction of heat...... losses from building envelopes are of great impor­tance in order to reach the Bologna CO2-emission reduction goals. Energy renovation of buildings is a topic of huge focus around the world these years. Not only expenses for heating in the tempered and arctic regions are of importance, but also expenses...

  10. Associação entre a morfologia de trincas de pisos cerâmicos e seu comportamento mecânico em fratura

    Directory of Open Access Journals (Sweden)

    E. S. Fonseca

    2015-09-01

    Full Text Available ResumoEste trabalho analisou os dados obtidos a partir de ensaios a flexão em um lote de 40 corpos de provas de placas cerâmicos, preparados da mesma forma de acordo com a norma brasileira de ensaios NBR 13818:1997. Os dados de resistência à flexão obtidos nos testes, na forma de curvas tensão versus flexão, foram avaliados estatisticamente. Análises estatísticas detalhadas mostraram dois subgrupos diferentes de comportamento mecânico apresentado pelos corpos de prova cerâmicos testados. A análise fractográfica de amostras representativas destes dois grupos indicaram diferenças morfológicas relevantes nas fraturas obtidas destas amostras durante o ensaio. Essas diferenças puderam ser associadas com o comportamento mecânico apresentados pelas amostras analisadas.

  11. Transit investments for greenhouse gas and energy reduction program : second assessment report.

    Science.gov (United States)

    2014-08-01

    This report is the second assessment of the U.S. Department of Transportation, Federal Transit Administrations Transit Investments for : Greenhouse Gas and Energy Reduction (TIGGER) Program. The TIGGER Program provides capital funds to transit age...

  12. Productos de alfarería de Cerro Macareno, Sevilla : naturaleza y procedencia de las ánforas y otros objetos cerámicos. Siglos VIII al III a. J.C.

    OpenAIRE

    García Ramos, G.; González Vilches, M. C.; González García, Francisco

    1985-01-01

    Son muchos los métodos empleados para el estudio de las arcillas y de los productos cerámicos, contribuyendo de distinta manera, aunque complementaria, en el conocimiento de la composición, procedencia de los materiales, tecnología empleada en su elaboración y en general en todos aquellos procesos que se pudieron seguir en la tibricación del objeto cerámico. Estos métodos pueden ser, bien destructivos, aunque utilizando cantidades muy pequeñas de muestra, o bien no destructivos...

  13. El estudio arqueométrico de la producciones cerámicas

    Directory of Open Access Journals (Sweden)

    C. Olaetxea

    2005-01-01

    Full Text Available El estudio de la pasta de las cerámicas mediante lámina delgada, difracción de rayos X y su análisis quimico permite profundizar en el conocimiento sobre el origen de las mismas y en su tecnología de elaboración, asi como determinar las temperaturas minimas o maximas de cocción alcanzadas. De igual modo permite poner de manifiesto las modificaciones posteriores sufridas por el uso continuado de las mismas y por procesos tardíos debidos al soterramiento de las piezas. Los resultados obtenidos cotejados con la informacion arqueológica, la contextualización de los yacimientos y el entorno cultural de cada época permite constatar en algunos casos pautas comerciales o de intercambio

  14. El impacto sobre las propiedades mecánicas de la saturación de agua de los ladrillos cerámicos contemporáneos y del siglo XIX

    OpenAIRE

    Matysek, P.; Stryszewska, T.; Kańka, S.; Witkowski, M.

    2016-01-01

    En el artículo se presentan los resultados del estudio de los ladrillos cerámicos producidos en los años 80 del siglo XIX. Los ladrillos se obtuvieron del edificio que forma parte de un conjunto de cuarteles del archiduque Rudolfo en Cracovia en Polonia. En los estudios se han determinado los cambios de la resistencia a la compresión y la dureza de los ladrillos, por efecto de la saturación de agua del material cerámico. A efectos comparativos, se han realizado también estudios de ladrillos p...

  15. Avaliação da introdução de cal hidratada nas argamassas aplicadas sobre blocos cerâmicos e sua influência no desempenho e morfologia

    OpenAIRE

    Giuliano Polito

    2008-01-01

    Este trabalho investiga a resistência de aderência de revestimentos argamassados sobre a alvenaria de blocos cerâmicos, concentrando-se na análise da microestrutura da interface argamassa/substrato, correlacionando-se ao comportamento mecânico da argamassa e à adição de cal hidratada na argamassa. Neste estudo foram avaliados cinco traços distintos, composto de cimento:cal:areia (1:0:6; 1:1:6; 1:2:8; 1:2:10; 0:1:6), aplicados sobre substrato de bloco cerâmico seco, com a utilização de técnica...

  16. Evaluating the risk-reduction benefits of wind energy

    Energy Technology Data Exchange (ETDEWEB)

    Brower, M.C. [Brower & Company, Andover, MA (United States); Bell, K. [Convergence Research, Seattle, WA (United States); Bernow, S.; Duckworth, M. [Tellus Inst., Boston, MA (United States); Spinney P. [Charles River Associates, Boston, MA (United States)

    1996-12-31

    This paper presents preliminary results of a study to evaluate the risk-reduction benefits of wind power for a case study utility system using decision analysis techniques. The costs and risks of two alternative decisions-whether to build a 400 MW gas-fired combined cycle plant or a 1600 MW wind plant in 2003-were compared through computer simulations as fuel prices, environmental regulatory costs, wind and conventional power plant availability, and load growth were allowed to vary. Three different market scenarios were examined: traditional regulation, a short-term power pool, and fixed-price contracts of varying duration. The study concludes that, from the perspective of ratepayers, wind energy provides a net levelized risk-reduction benefit of $3.4 to $7.8/MWh under traditional regulation, and less in the other scenarios. From the perspective of the utility plant owners, wind provides a significant risk benefit in the unregulated market scenarios but none in a regulated market. The methodology and findings should help inform utility resource planning and industry restructuring efforts. 2 figs., 3 tabs.

  17. Efecto de parámetros geométricos en las prestaciones mecánicas de estructuras porosas cerámicas y estructuras hibridas interpenetradas cerámico/polímero fabricadas mediante moldeo robotizado

    OpenAIRE

    Godoy Romero, Carolina

    2016-01-01

    Esta Tesis Doctoral se enmarca en una línea de investigación del Grupo Especializado de Materiales de la Universidad de Extremadura (GEMA-UEx) que se orienta hacia el diseño, fabricación y optimización mecánica de nuevos biomateriales para aplicaciones ortopédicas. Concretamente, se trata de estructuras porosas fabricadas mediante la técnica de moldeo robotizado (robocasting). Estas estructuras consisten en una red tridimensional de barras cerámicas obtenidas capa a capa por extrusión a travé...

  18. Expansão por umidade de revestimentos cerâmicos incorporados com residuos de granito e caulim Moisture expansion of ceramic tiles produced using kaolin and granite wastes

    Directory of Open Access Journals (Sweden)

    A. M. G. D. Mendonça

    2012-06-01

    Full Text Available Expansão por umidade (EPU é o aumento das dimensões dos materiais cerâmicos em virtude da adsorção de água. A EPU geralmente ocorre lentamente e é relativamente pequena, mas, mesmo assim, pode comprometer a aderência das placas cerâmicas ao contrapiso, levar ao gretamento do vidrado e conduzir ao aparecimento de trincas em tijolos. Neste trabalho empregaram-se massas incorporadas com resíduos de caulim e de granito objetivando estudar a EPU de revestimentos cerâmicos. As matérias-primas foram beneficiadas e submetidas às caracterizações físicas e mineralógicas através de ensaios de análise granulométrica por difração a laser, análise química, análise termodiferencial, termogravimétrica e difração de raios X. Os resultados mostraram que os resíduos de caulim e de granito podem ser utilizados como matéria-prima cerâmica alternativa, pois apresentam características similares às matérias-primas cerâmicas convencionais, permitindo a obtenção de peças com resultados de EPU satisfatórios quando comparado ao valor limite de 0,6 mm/m (0,06% proposto pela ABNT para revestimentos cerâmicos, notadamente em composições com teores de até 20% de resíduos, a temperaturas superiores a 1000 ºC.Moisture expansion (ME is the term used to describe the expansion of ceramic materials due to the adsorption of water. ME usually occurs slowly and is relatively small, but, it can damage the ceramic tiles adhesion to the underlayment, craze the glaze and lead to the development of cracks on ceramics bricks. In this work kaolin and granite wastes were incorporated in ceramic compositions aiming study their influence on the ME of ceramic tiles. Raw materials were processed and submitted to characterization: physical and mineralogical by laser diffraction particle size analysis, chemical analysis, thermodifferential and thermogravimetric analysis and X-ray diffraction. Results showed that kaolin and granite wastes can be

  19. Caracterização de massas cerâmicas do estado de S. Paulo para produção de agregados leves para concreto

    Directory of Open Access Journals (Sweden)

    B. C. Santis

    2013-06-01

    Full Text Available Este trabalho tem por objetivo a caracterização de diferentes massas cerâmicas do estado de S. Paulo para a produção de agregados leves de argila calcinada visando à utilização em concretos de cimento Portland. A caracterização das massas cerâmicas deu-se por meio das técnicas de limites de liquidez e plasticidade, análise granulométrica, análise química e difração de raios X. Os corpos de prova confeccionados com essas massas cerâmicas, queimados a 900 ºC, foram caracterizados por meio da avaliação da retração linear, absorção de água, porosidade aparente, massa específica aparente, expansão por umidade e resistência à compressão. Os resultados desta pesquisa indicaram a viabilidade da produção de agregados leves de argila calcinada para utilização em concretos e os valores da massa específica (1,555 a 1,785 kg/m³ e da resistência à compressão (18,0 a 55,8 MPa apresentaram-se em um patamar intermediário entre os observados para a argila expandida (agregado leve comercial e para o agregado convencional (basalto.

  20. Energy saving and emission reduction: A project of coal-resource integration in Shanxi Province, China

    International Nuclear Information System (INIS)

    Zhang Jianjun; Fu Meichen; Geng Yuhuan; Tao Jin

    2011-01-01

    The small or middle coal mines with illegal operations in developing countries or regions can cause bad energy waste and environmental disruption. The project of coal-resource integration in Shanxi Province of China gives a new idea or an approach to energy saving and emission reduction. It is a social- and economic-ecological project. The paper shows the targets of energy saving and emission reduction in Shanxi Province, and analyses the aims, significance, design process and implementation of the integration project. Based on that, the paper discusses the challenges and opportunities the project brings. The analysis shows that the project of coal-resource integration in developing countries or regions can effectively improve mining technologies, collect capital and impel international cooperation and exchange. Finally, the paper analyses the concerns about the future, including the possible problems of implementation period, industrial updating, environmental impact and re-employment. However, the successful integration of coal resources can mitigate energy crisis and climate crisis and promote cleaner production effectively. - Highlights: → Coal-resource integration gives a new idea or an approach to energy saving and emission reduction. → Coal-resource integration mitigates climate crisis and promotes cleaner production. → Coal-resource integration brings challenges and opportunities to traditional mining industries.

  1. Energy invoice in 1992: A reduction of 14 Milliard Francs in comparison with 1991

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    This paper presents France energy accounting and shows that energy invoice has been reduced from 94.2 to 80.0 Milliards Francs. This reduction is in relation with a fall of imported petroleum products and a fold of the dollar quotation. 2 figs., 4 tabs

  2. Análisis traceológico de la cerámica: modelado y espacio social durante el postalayótico (V-I A.C.) en la Península de Santa Ponça (Calvià, Mallorca)

    OpenAIRE

    Garcia Rosselló, Jaume

    2010-01-01

    La tesis doctoral que presentamos a continuación bajo el título: “Análisis traceológico de la cerámica: modelado y espacio social durante el postalayótico (V-I A.C.) en la Península de Santa Ponça (Calvià, Mallorca) tiene una doble orientación: Por una parte es una nueva propuesta metodológica fundamentada en la reconstrucción de los sistemas de modelado por medio de la traceología cerámica. Por otro, es una aplicación metodológica sobre un conjunto de cerámicas adscritas a la edad de hierro ...

  3. La industria cerámica europea en el siglo XXI. Retos tecnológicos y desafíos de la próxima década

    Directory of Open Access Journals (Sweden)

    Albors, J.

    2006-02-01

    Full Text Available The European, Spanish and Italian tile ceramic industry, has achieved today a relevant technology leadership. Nevertheless, in certain aspects of the tile ceramic manufacturing process, artisan cultures still subsist which are derived from the origin of the industry. This situation, combined with the crisis initiated at the start of the century, the globalisation, the increasing pressure of tile ceramic industries located in the East and the changes in the preferences of the customers presents/ a scenario which will cause determined technology demands on the tile ceramic process. The present communication reflects on these aspects from the perspective of the work developed by the MONOTONE project, financed by the European Commission.

    La industria cerámica europea, española e italiana, ha logrado un liderazgo tecnológico importante en la actualidad. Sin embargo, en algunos aspectos del proceso de fabricación de la cerámica, subsisten culturas artesanales que aún perduran y que son derivadas del origen de la industria. Esta situación, combinada con la crisis iniciada en la actualidad, la globalización, la creciente presión de industrias cerámicas tan alejadas como la China y los cambios en las preferencias de los clientes presentan un panorama que va a acabar produciendo, previsiblemente, ciertas demandas tecnológicas sobre el proceso de manufactura cerámica, tras una fase previa de presión sobre el proceso de desarrollo de producto. La presente comunicación tratara de realizar una reflexión sobre estos aspectos desde la perspectiva de los trabajos desarrollados por el proyecto MONOTONE, financiado por la Comisión Europea y en el que participan 17 institutos y empresas europeas del sector1.

  4. Estudio de distribución de tiempos de residencia en un reactor biológico de lecho empacado cerámico

    Directory of Open Access Journals (Sweden)

    Tatiana Rodríguez Chaparro

    2004-01-01

    Full Text Available La distribución de tiempos de residencia de un reactor es una característica del mezclado que ocurre dentro de él [ ] 1 [ ] 2 ; su determinación es básica para el diseño de cualquier tipo de reactor en escala real. El objetivo de esta investigación consistió en determinar la distribución de tiempos de residencia en un reactor biológico de lecho empacado cerámico (anillos a partir de pruebas con trazadores. Los resultados obtenidos utilizando las técnicas de inyección por paso y pulso fueron 34.577 seg., y 17.745 seg., respectivamente, y la dispersión calculada infinita. Lo anterior permite concluir que en reactores de lecho empacado cerámico (anillos las moléculas del trazador se distribuyen uniformemente en todo el sistema. Los ensayos se realizaron en un modelo a escala laboratorio.

  5. Incorporação de resíduo do tratamento de drenagem ácida em massa de cerâmica vermelha Incorporation of acid drainage treatment sludge waste into red ceramic products

    Directory of Open Access Journals (Sweden)

    S. L. Galatto

    2009-03-01

    Full Text Available Neste trabalho, apresenta-se o estudo experimental em escala laboratorial e industrial da incorporação de resíduo do tratamento de Drenagem Ácida de Mina (DAM na formulação de massa de cerâmica vermelha, com substituição parcial das argilas. Foram realizados algumas análises e ensaios nas amostras dos blocos cerâmicos: análise dilatométrica a verde, absorção de água, resistência à compressão, eflorescência de sais solúveis e emissões atmosféricas (MP e SOx. Os resultados das análises nos corpos de prova ensaiados indicam aumento de resistência a compressão. Os ensaios de eflorescência de sais solúveis indicam maior intensidade de cristalização de sais solúveis na superfície dos corpos de prova e blocos cerâmicos à medida que se aumenta o percentual de resíduo. As análises realizadas nos blocos cerâmicos ensaiados em escala industrial, recomendam uma proporção de até 2,5% de resíduo na massa cerâmica.An experimental laboratory and industry scale study of the incorporation of residue from Acid Drainage Mine (ADM in the ceramics mass, with partial substitution of clays, is presented. Some analyses and assays of the ceramic blocks were been carried out: dilatometry, water absorption, compressive strength, efflorescence and emissions (MP and SOx. The results show an increase of compressive strength. The efflorescence assays indicate greater intensity of crystallization of soluble salts in the surface of the ceramic blocks for increasing residue content. The analyses in the ceramic blocks in industrial scale recommend a ratio of up to 2.5% of waste in bulk ceramics.

  6. La cerámica Khirbet Kerak (Beth Yerah, Israel y la etnicidad: un enfoque alternativo

    Directory of Open Access Journals (Sweden)

    Bernardo Gandulla

    2007-07-01

    Full Text Available La cerámica Khirbet Kerak, descubierta en el sudoeste del Mar de Galilea en 1930 por W. F. Albright, ha sido desde entonces motivo de muchas controversias. Las razones de las discusiones en torno a este estilo radican  en su carácter aparentemente intrusivo en Palestina, entre el 2800-2400  a.C., puesto que esta cerámica es típica en la Cultura Transcaucásica Temprana o Cultura Kura-Araxes y en Siria Septentrional, durante el Bronce Antiguo, siendo especialmente abundante en la etapa final de este período. Sin embargo los estudios realizados en Beth Shan (Chazan y McGovern, ver n. 17, muestran que los materiales Khirbet Kerak fueron de producción local lo que parece descartar su carácter intrusivo. Por tanto, desde nuestro punto de vista, el “fenómeno Khirbet Kerak” constituye así un hito de singular importancia en la conformación de las tradiciones culturales de Canaan a partir de un sustrato etnocultural común hurrita, en un eje de interacción cultural norte a sur desde la región del Lago Van, que habrá de proyectarse de distintas formas en la macrorregión alcanzando hasta los antiguos hebreos, en cuanto cananeos, como se reflejan en instituciones del derecho privado presentes en las narraciones del Génesis.Palabras clave: Canaán - Bronce Antiguo - Beth Yerah - Khirbet Kerak - Hurritas- Hebreos

  7. Estudio de los factores que gobiernan la coloración de los esmaltes cerámicos

    Directory of Open Access Journals (Sweden)

    Camacho, H.

    2005-02-01

    Full Text Available To obtain the usual colours in ceramic decoration several ceramic pigments formed by pure oxides and mixtures of different structures as spinels, zircon, badeleyite...were used. This study focussed in the physics principles that the mixtures of pigment must satisfy to determine the resulting colours. Six pigments were selected to obtain the maximum possible combinations to validate the superposition effects when the pigments are similar and the multi-dispersion effects when the pigments are dissimilar in the spectrum.

    Para obtener toda la gama de colores habituales en la decoración cerámica se usan los pigmentos cerámicos, los cuales están formados por óxidos y mezclas de los mismos formando diferentes tipos de estructuras específicas espinelas, circones, badeleyita etc., que se pueden tener por separados o mezclados en busca del color que se quiere lograr. El presente estudio enfoca su atención en el cumplimiento de los principios físicos que cumplen los pigmentos al ser mezclados para la determinación del color resultante. Se escogen seis pigmentos de manera que se tengan la mayoría de las combinaciones posibles y se observa la validez de la superposición para pigmentos cercanos en el espectro luminoso y el mayor efecto de la multidispersión para pigmentos lejanos en dicho espectro.

  8. An analysis of energy strategies for CO2 emission reduction in China. Case studies by MARKAL model

    International Nuclear Information System (INIS)

    Li Guangya

    1994-12-01

    The China's energy system has been analyzed by using the MARKAL model in this study and the time period is from the year 1990 to 2050. The MARKAL model is applied here to evaluate the cost effective energy strategies for CO 2 emission reduction in China. Firstly the Reference Energy System (RES) of China and its database were established, and the useful energy demand was projected on the basis of China's economic target and demographic forecasting. Four scenarios, BASE1-BASE4 were defined with different assumptions of crude oil and natural uranium availability. Analytical results show that without CO 2 emission constrains coal consumption will continue to hold a dominant position in primary energy supply, and CO 2 emissions in 2050 will be 9.55 BtCO 2 and 10.28 BtCO 2 with different natural uranium availability. Under the CO 2 emission constraints, nuclear and renewable energy will play important roles in CO 2 emission reduction, and feasible maximum CO 2 emission reduction estimated by this study is 3.16 BtCO 2 in 2050. The cumulative CO 2 emission from 1990 to 2050 will be 418.25 BtCO 2 and 429.16 BtCO 2 with different natural uranium availability. Total feasible maximum CO 2 emission reduction from 1990 to 2050 is 95.97 BtCO 2 . (author)

  9. Energy-Efficiency and Air-Pollutant Emissions-Reduction Opportunities for the Ammonia Industry in China

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Ding [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chen, Wenying [Tsinghua Univ., Beijing (China)

    2015-06-01

    As one of the most energy-intensive and polluting industries, ammonia production is responsible for significant carbon dioxide (CO2) and air-pollutant emissions. Although many energy-efficiency measures have been proposed by the Chinese government to mitigate greenhouse gas emissions and improve air quality, lack of understanding of the cost-effectiveness of such improvements has been a barrier to implementing these measures. Assessing the costs, benefits, and cost-effectiveness of different energy-efficiency measures is essential to advancing this understanding. In this study, a bottom-up energy conservation supply curve model is developed to estimate the potential for energy savings and emissions reductions from 26 energy-efficiency measures that could be applied in China’s ammonia industry. Cost-effective implementation of these measures saves a potential 271.5 petajoules/year for fuel and 5,443 gigawatt-hours/year for electricity, equal to 14% of fuel and 14% of electricity consumed in China’s ammonia industry in 2012. These reductions could mitigate 26.7 million tonnes of CO2 emissions. This study also quantifies the co-benefits of reducing air-pollutant emissions and water use that would result from saving energy in China’s ammonia industry. This quantitative analysis advances our understanding of the cost-effectiveness of energy-efficiency measures and can be used to augment efforts to reduce energy use and environmental impacts.

  10. A study of the rebound effect on China's current energy conservation and emissions reduction: Measures and policy choices

    International Nuclear Information System (INIS)

    Lin, Boqiang; Yang, Fang; Liu, Xia

    2013-01-01

    Energy efficiency improvement leads to a reduction in the real cost of energy services per unit, thus bringing about an increase in the demand for energy services. Therefore, the potential energy savings and emission reduction from efficiency improvements might be offset, which is known as “the rebound effect”. This study disaggregates the effect into the direct and indirect effects based on the Slutsky Equation and finds that the rebound effect of Chinese urban households is approximately 22%. It is found that the indirect effect is stronger than the direct effect. These findings prove that the initial goals of the government on energy conservation and emission reduction could not be achieved by improving energy efficiency alone, but need to be supplemented with relevant energy pricing reforms. - Highlights: • This study disaggregates the effect into the direct and indirect effects. • The rebound effect of Chinese urban households is approximately 22%. • The indirect effect is stronger than the direct effect. • Energy pricing reform is needed to mitigate the rebound effect

  11. A quantitative analysis of the cost-effectiveness of project types in the CDM pipeline

    Energy Technology Data Exchange (ETDEWEB)

    Green, Gavin A.

    2008-09-15

    The flexibility of the CDM is intended to reduce the cost of compliance for Annex 1 countries and contribute to cost-effective reductions. This paper provides a framework for defining cost-effective payments for CDM carbon reductions. The projects in the CDM pipeline are categorised into project types. The data provided in the Project Design Documents is quantitatively assessed to calculate the median cost and range of costs for producing a CER from the project categories. These are measured against the range of prices in the market in order to estimate the level of cost-effectiveness. Global warming potential and size of the project were shown to be key factors in the cost of producing a CER. The results show that although prices for CERs are difficult to define in the primary CER market, many of the project categories generated CERs at a cost well below the lowest market price. The difference in these two values is defined as a loss in cost-effectiveness. The CDM is shown to be successful at developing the 'lowest hanging fruit' but the mechanism could be improved to fulfil the goal of cost-effectiveness by linking the price per CER to the cost of generating a CER. (au)

  12. Aplicación de principios de Kansei en el diseño cerámico

    OpenAIRE

    Agost Torres, María Jesús; Vergara Monedero, Margarita

    2016-01-01

    El estudio de las impresiones afectivas provocadas por los productos es un tema de gran interés tanto en investigación como en el mundo empresarial. Entre las técnicas para cuantificar los significados y emociones de producto destaca la Ingeniería Kansei, que estudia la relación de características concretas de diseño con las impresiones subjetivas generadas. El presente trabajo analiza la influencia de parámetros objetivos de diseño de los pavimentos cerámicos en la p...

  13. La cerámica en Cantabria desde su aparición (5000 cal BC hasta el final de la Prehistoria: técnicas de manufactura y características morfo-decorativas

    Directory of Open Access Journals (Sweden)

    CUBAS, M., BOLADO DEL CASTILLO, R., PEREDA ROSALES, E.M. y FERNÁNDEZ VEGA, P.A.

    2013-01-01

    En este artículo se presenta una visión diacrónica de la cerámica en la actual provincia de Cantabria desde su aparición (V milenio cal BC hasta el momento en el que finaliza lo que tradicionalmente se ha considerado como Prehistoria (siglo I cal BC. Se señalan las características tecnológicas, morfológicas y decorativas, resaltando aquellos rasgos comunes de los conjuntos cerámicos documentados durante este intervalo cronológico.

  14. Influência do sulfato de bário nas características de cerâmica vermelha incorporada com resíduo oleoso inertizado Influence of barium sulfate on the characteristics of red ceramic incorporated with oily waste

    Directory of Open Access Journals (Sweden)

    F. A. N. Silva

    2006-03-01

    Full Text Available A incorporação em cerâmicas de resíduos como borras resultantes da extração, transporte ou refino de petróleo evita seu lançamento no meio ambiente. Por outro lado, é importante avaliar as alterações tecnológicas causadas pela adição do resíduo, sobretudo, no caso de comprometer a qualidade do produto cerâmico. Neste trabalho estudou-se a microestrutura de um material cerâmico contendo 0, 10, 15 e 20% em peso de um resíduo denominado borra de petróleo encapsulada, queimado em temperaturas que variam de 850 a 1100 ºC. A microanálise do material foi realizada através de espectrometria por dispersão de energia (EDS de modo a complementar a análise topográfica feita por microscopia eletrônica de varredura (MEV, para possibilitar a identificação dos elementos químicos presentes, bem como partículas de segunda fase. Os resultados demonstraram que a adição desta borra de petróleo encapsulada provoca alterações tanto na composição química quanto na microestrutura do material cerâmico. Partículas de formato e características distintas das observadas na cerâmica sem adição de resíduo, principalmente partículas de sulfato de bário, foram mapeadas e sua influência discutida.The incorporation into ceramics of residues, such as oily wastes from extraction, transport and refining of petroleum is a way to avoid their disposal to the environment. On the other hand, it is important to evaluate the technological changes caused by the addition of the residue, mainly, in the case that it could compromise the quality of the ceramic product. In this work, the microstructure resulting from the incorporation with 0, 10, 15 and 20 wt.% of a residue, known as encapsulated petroleum waste, into a ceramic material that was fired at temperatures in the range of 850 to 1100 ºC, was investigated. The microanalysis of the material was performed by Energy Dispersed Spectroscopy (EDS to complement the topographic carried out by

  15. Reductions in energy use and environmental emissions achievable with utility-based cogeneration: Simplified illustrations for Ontario

    International Nuclear Information System (INIS)

    Rosen, M.A.

    1998-01-01

    Significant reductions in energy use and environmental emissions are demonstrated to be achievable when electrical utilities use cogeneration. Simplified illustrations of these reductions are presented for the province of Ontario, based on applying cogeneration to the facilities of the main provincial electrical utility. Three cogeneration illustrations are considered: (i) fuel cogeneration is substituted for fuel electrical generation and fuel heating, (ii) nuclear cogeneration is substituted for nuclear electrical generation and fuel heating, and (iii) fuel cogeneration is substituted for fuel electrical generation and electrical heating. The substitution of cogeneration for separate electrical and heat generation processes for all illustrations considered leads to significant reductions in fuel energy consumption (24-61%), which lead to approximately proportional reductions in emissions. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

  16. Nueva materia prima borácica como componente de esmaltes cerámicos. Estudio de su solubilidad en suspensiones acuosas concentradas

    Directory of Open Access Journals (Sweden)

    Galindo, M.

    2009-02-01

    Full Text Available This paper presents an alternative to the use of conventional ceramic frits as raw materials that contribute boron to glaze compositions: a new semi-processed borate (patent pending (WO 2007/148101. The solubility of this new raw material is analysed and compared with that exhibited by conventional ceramic frits and other, natural and processed borates. This comparative analysis has been performed by determining the boron percentage present in the liquid phase of several glaze compositions prepared with each of these raw materials, modifying the type of deflocculant used and the solid/liquid contact time. The results of this study demonstrate the low solubility of the new semi-processed borate and its suitability for use in ceramic glaze formulation.

    En el presente trabajo se presenta una alternativa a la utilización de fritas cerámicas convencionales como materias primas que aportan boro a las composiciones de esmalte: un nuevo borato sintético (patente pendiente WO2007/148101. Se ha estudiado y comparado la solubilidad de esta nueva materia prima con la que exhiben las fritas cerámicas convencionales y otros boratos, tanto naturales como sintéticos. Para ello, se ha determinado el porcentaje de boro presente en la fase líquida de varios esmaltes preparados con cada una de dichas materias primas, modificando el tipo de desfloculante utilizado y el tiempo de contacto sólido/líquido. El resultado de este trabajo ha puesto de manifiesto la baja solubilidad que presenta el nuevo borato sintético y su aptitud para ser usado en la formulación de esmaltes cerámicos.

  17. Novas técnicas de reometria aplicadas a suspensões cerâmicas Novel rheometric techniques applied to ceramic suspensions

    Directory of Open Access Journals (Sweden)

    R. D. dos Anjos

    2005-06-01

    Full Text Available Suspensões cerâmicas com adequado comportamento reológico são imprescindíveis para a aplicação, adequação do processamento e otimização das propriedades finais dos produtos. No entanto, o uso de técnicas de reometria para análise de suspensões cerâmicas foi pouco explorado na literatura, quando comparado a outros sistemas, tais como polímeros fundidos. Desse modo, pretende-se demonstrar que o emprego de técnicas mais modernas de reometria permite uma nova compreensão desses materiais e das interações entre seus componentes. Neste trabalho foi estabelecida uma metodologia de análise para sistemas cerâmicos tendo como objeto de pesquisa uma suspensão de alumina e sol de sílica. Foi realizada uma série de medidas de viscosidade (eta, módulos de armazenamento (G' e de perda (G" e de força normal (Fn, cujos resultados servirão de base para estudos posteriores no mesmo sistema, visando aplicação em concretos refratários.Ceramic suspensions with suitable rheological properties are essential on application, process control and optimization of end products and properties. Nevertheless, the use of rheometric techniques to analyze such suspensions has been scarcely studied when compared to other systems, such as molten polymers. Therefore, in the present work, novel rheometric techniques will be presented which can allow a further understanding regarding these materials and the interaction among their components. A systematic study applying these techniques was established and the viscosity, storage modulus, loss modulus and normal force measurements were evaluated in a ceramic suspension containing alumina and silica sol. These results will be the fundaments for further studies, aiming their application on refractory castables.

  18. Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Design Support for Tooling Optimization

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Dongtao

    2011-09-23

    High pressure die casting is an intrinsically efficient net shape process and improvements in energy efficiency are strongly dependent on design and process improvements that reduce scrap rates so that more of the total consumed energy goes into acceptable, usable castings. Computer simulation has become widely used within the industry but use is not universal. Further, many key design decisions must be made before the simulation can be run and expense in terms of money and time often limits the number of decision iterations that can be explored. This work continues several years of work creating simple, very fast, design tools that can assist with the early stage design decisions so that the benefits of simulation can be maximized and, more importantly, so that the chances of first shot success are maximized. First shot success and better running processes contributes to less scrap and significantly better energy utilization by the process. This new technology was predicted to result in an average energy savings of 1.83 trillion BTUs/year over a 10 year period. Current (2011) annual energy saving estimates over a ten year period, based on commercial introduction in 2012, a market penetration of 30% by 2015 is 1.89 trillion BTUs/year by 2022. Along with these energy savings, reduction of scrap and improvement in yield will result in a reduction of the environmental emissions associated with the melting and pouring of the metal which will be saved as a result of this technology. The average annual estimate of CO2 reduction per year through 2022 is 0.037 Million Metric Tons of Carbon Equivalent (MM TCE).

  19. Fundamental research on sintering technology with super deep bed achieving energy saving and reduction of emissions

    International Nuclear Information System (INIS)

    Hongliang Han; Shengli Wu; Gensheng Feng; Luowen Ma; Weizhong Jiang

    2012-01-01

    In the general frame of energy saving, environment protection and the concept of circular economy, the fundamental research on the sintering technology with super deep bed, achieving energy saving and emission reduction, was carried out. At first, the characteristics of the process and exhaust emission in the sintering with super deep bed was mastered through the study of the influence of different bed depths on the sintering process. Then, considering the bed permeability and the fuel combustion, their influence on the sinter yield and quality, their potential for energy saving and emission reduction was studied. The results show that the improvement of the bed permeability and of the fuel combustibility respectively and simultaneously, leads to an improvement of the sintering technical indices, to energy saving and emission reduction in the condition of super deep bed. At 1000 mm bed depth, and taking the appropriate countermeasure, it is possible to decrease the solid fuel consumption and the emission of CO 2 , SO 2 , NO x by 10.08%, 11.20%, 22.62% and 25.86% respectively; and at 700 mm bed depth, it is possible to reduce the solid fuel consumption and the emission of CO 2 , SO 2 , NO x by 20.71%, 22.01%, 58.86% and 13.13% respectively. This research provides the theoretical and technical basis for the new technology of sintering with super deep bed, achieving energy saving and reduction of emission. (authors)

  20. Energy Reduction Multipath Routing Protocol for MANET Using Recoil Technique

    Directory of Open Access Journals (Sweden)

    Rakesh Kumar Sahu

    2018-04-01

    Full Text Available In Mobile Ad-hoc networks (MANET, power conservation and utilization is an acute problem and has received significant attention from academics and industry in recent years. Nodes in MANET function on battery power, which is a rare and limited energy resource. Hence, its conservation and utilization should be done judiciously for the effective functioning of the network. In this paper, a novel protocol namely Energy Reduction Multipath Routing Protocol for MANET using Recoil Technique (AOMDV-ER is proposed, which conserves the energy along with optimal network lifetime, routing overhead, packet delivery ratio and throughput. It performs better than any other AODV based algorithms, as in AOMDV-ER the nodes transmit packets to their destination smartly by using a varying recoil off time technique based on their geographical location. This concept reduces the number of transmissions, which results in the improvement of network lifetime. In addition, the local level route maintenance reduces the additional routing overhead. Lastly, the prediction based link lifetime of each node is estimated which helps in reducing the packet loss in the network. This protocol has three subparts: an optimal route discovery algorithm amalgamation with the residual energy and distance mechanism; a coordinated recoiled nodes algorithm which eliminates the number of transmissions in order to reduces the data redundancy, traffic redundant, routing overhead, end to end delay and enhance the network lifetime; and a last link reckoning and route maintenance algorithm to improve the packet delivery ratio and link stability in the network. The experimental results show that the AOMDV-ER protocol save at least 16% energy consumption, 12% reduction in routing overhead, significant achievement in network lifetime and packet delivery ratio than Ad hoc on demand multipath distance vector routing protocol (AOMDV, Ad hoc on demand multipath distance vector routing protocol life

  1. Developmental dysplasia of the hip: A computational biomechanical model of the path of least energy for closed reduction.

    Science.gov (United States)

    Zwawi, Mohammed A; Moslehy, Faissal A; Rose, Christopher; Huayamave, Victor; Kassab, Alain J; Divo, Eduardo; Jones, Brendan J; Price, Charles T

    2017-08-01

    This study utilized a computational biomechanical model and applied the least energy path principle to investigate two pathways for closed reduction of high grade infantile hip dislocation. The principle of least energy when applied to moving the femoral head from an initial to a final position considers all possible paths that connect them and identifies the path of least resistance. Clinical reports of severe hip dysplasia have concluded that reduction of the femoral head into the acetabulum may occur by a direct pathway over the posterior rim of the acetabulum when using the Pavlik harness, or by an indirect pathway with reduction through the acetabular notch when using the modified Hoffman-Daimler method. This computational study also compared the energy requirements for both pathways. The anatomical and muscular aspects of the model were derived using a combination of MRI and OpenSim data. Results of this study indicate that the path of least energy closely approximates the indirect pathway of the modified Hoffman-Daimler method. The direct pathway over the posterior rim of the acetabulum required more energy for reduction. This biomechanical analysis confirms the clinical observations of the two pathways for closed reduction of severe hip dysplasia. The path of least energy closely approximated the modified Hoffman-Daimler method. Further study of the modified Hoffman-Daimler method for reduction of severe hip dysplasia may be warranted based on this computational biomechanical analysis. © 2016 The Authors. Journal of Orthopaedic Research Published by Wiley Periodicals, Inc. on behalf of Orthopaedic Research Society. J Orthop Res 35:1799-1805, 2017. © 2016 The Authors. Journal of Orthopaedic Research Published by Wiley Periodicals, Inc. on behalf of Orthopaedic Research Society.

  2. Improved energy confinement with neon injection in the DIII-D tokamak

    International Nuclear Information System (INIS)

    Staebler, G.M.; Jackson, G.L.; West, W.P. Groebner, R.J.; Schaffer, M.J.; Allen, S.L.; Whyte, D.G.

    1997-06-01

    In this paper the authors will report the first direct measurements of the fully stripped neon 10 + density profile in a plasma with enhanced energy confinement due to neon injection. This is made with a calibrated charge exchange recombination (CER) system. It is found that the neon 10 + density is peaked like the electron density with a slightly higher concentration towards the edge. The good news is that the neon 10 + fraction is less than 1% (normalized to the electron density). The radial electric field can also be computed from the CER measurements on DIII-D. The shear in the E x B velocity is found to exceed the maximum growth rate of the ion temperature gradient (ITG) mode over part of the profile, a condition for the suppression of turbulent transport. This agrees with the reduced power balance thermal diffusivities near the magnetic axis

  3. The «C» campanian and grey seudocampanian pottery in the province of Seville | La cerámica campaniense «C» y seudocampaniense de pasta gris en la provincia de Sevilla

    Directory of Open Access Journals (Sweden)

    Juan José Ventura Martínez

    1985-12-01

    Full Text Available We want to make a contribution to the study of the Campanian pottery in the Iberian Peninsula. We analyse a lot of this pottery from various sites of the province of Seville, and carry out the study of the C Campanian pottery, and of the grey-paste pottery connected with it, in this area. | El presente estudio pretende ser una contribución al conocimiento de la cerámica campaniense en el ámbito de la Península Ibérica. En base al material reunido, procedente de diversos yacimientos de la provincia de Sevilla, el planteamiento del trabajo ha girado en torno a la documentación efectiva en dicho ámbito provincial tanto de la cerámica campaniense de tipo C como de una serie de cerámicas caracterizadas básicamente por su pasta gris y que en ocasiones, por sus características técnicas, formales o decorativas apuntan a una inspiración más o menos directa en las producciones propiamente campanienses.

  4. Influência da expansão por umidade no comportamento mecânico de argilas para uso em blocos de cerâmica vermelha - revisão Influence of moisture expansion on the mechanical behavior of structural clay materials for use in ceramic bricks - review

    Directory of Open Access Journals (Sweden)

    R. A. Andrade

    2011-09-01

    Full Text Available O fenômeno da expansão por umidade (EPU resulta da ação da água e seus vapores causando a expansão dos materiais cerâmicos, podendo provocar danos no material e prejudicar sua vida útil. Na literatura existe muita ênfase nos problemas gerados pela EPU e nas tensões resultantes dessa expansão, porém até o presente não há dados relativos ao comportamento mecânico dos materiais cerâmicos após ação da EPU. Trabalhos recentemente desenvolvidos na UFCG tratam especificamente desse problema em blocos cerâmicos de vedação. Inicialmente verificou-se que, no caso de massas cerâmicas para uso em cerâmica vermelha queimadas em diversas temperaturas na faixa de 700 a 1100 ºC, e com a EPU induzida por imersão, fervura e autoclavagem, a EPU tem correlação com o comportamento mecânico dos corpos queimados, observando-se redução no módulo de ruptura à flexão à medida que a EPU aumenta. Trabalhos desenvolvidos com massas para uso em cerâmica vermelha aditivadas com carbonato de cálcio e carbonato de magnésio e queimadas entre 850 e 1000 ºC, evidenciaram o efeito benéfico do carbonato de cálcio na redução da EPU e aumento da resistência à flexão, sendo observada correlação entre EPU e módulo de ruptura à flexão, mas, no entanto, não foi observada correlação entre a EPU e o módulo quando da utilização do carbonato de magnésio. Pesquisas efetuadas com massas para cerâmica vermelha aditivadas com quartzo fino, visando o desenvolvimento de fases vítreas, não mostraram correlações bem definidas entre EPU e módulo de ruptura, sendo observado que adições de 10 e 20% de quartzo melhoram a resistência mecânica dos corpos cerâmicos após autoclavagem e que a adição de 30% de quartzo reduz seu módulo de ruptura.Moisture expansion (ME phenomenon results from the action of water and water vapors causing the expansion of ceramic materials, which may damage the material damage and jeopardize its useful life

  5. Path towards achieving of China's 2020 carbon emission reduction target-A discussion of low-carbon energy policies at province level

    International Nuclear Information System (INIS)

    Wang Run; Liu Wenjuan; Xiao Lishan; Liu Jian; Kao, William

    2011-01-01

    Following the announcement of the China's 2020 national target for the reduction of the intensity of carbon dioxide emissions per unit of GDP by 40-45% compared with 2005 levels, Chinese provincial governments prepared to restructure provincial energy policy and plan their contribution to realizing the State reduction target. Focusing on Fujian and Anhui provinces as case studies, this paper reviews two contrasting policies as a means for meeting the national reduction target. That of the coastal province of Fujian proposes to do so largely through the development of nuclear power, whilst the coal-rich province of Anhui proposes to do so through its energy consumption rate rising at a lower rate than that of the rise in GDP. In both cases renewable energy makes up a small proportion of their proposed 2020 energy structures. The conclusion discusses in depth concerns about nuclear power policy, energy efficiency, energy consumption strategy and problems in developing renewable energy. - Research Highlights: → We review two contrasting policies as a means for meeting the national reduction target of carbon emission in two provinces. → Scenario review of energy structure in Fujian and Anhui Provinces to 2020. → We discuss concerns about nuclear power policy, energy efficiency, energy consumption strategy and problems in developing renewable energy.

  6. Caracterización físico-mecánica del yeso de construcción con adición de residuos de poliestireno extruído y residuos cerámicos

    OpenAIRE

    Rodríguez Rodríguez, Yuri Jazmín

    2015-01-01

    Este trabajo estudia el comportamiento de una matriz de yeso de construcción a la que se le han añadido residuos de construcción y demolición (RCD), residuos de poliestireno extruido (XPS) y residuos cerámicos respectivamente, combinados y en diferentes porcentajes en función del peso del yeso. Los residuos de XPS son producto de una obra en Madrid donde el material fue utilizado como aislamiento térmico y los residuos cerámicos corresponden a trozos de ladrillos toscos encontrados en una obr...

  7. Uncertainty-averse TRANSCO planning for accommodating renewable energy in CO2 reduction environment

    DEFF Research Database (Denmark)

    Zhang, Chunyu; Ding, Yi; Wang, Qi

    2015-01-01

    , demand-side variations, market price volatility, and transmission configuration. Three objectives, i.e. social CO2 reduction benefit, energy purchase and network expansion cost and power delivery profit, are optimized simultaneously by a developed two-phase multi-objective particle swarm optimization......The concern of the environment and energy sustainability requests a crucial target of CO2 abatement and results in a relatively high penetration of renewable energy generation in the transmission system. For maintaining system reliability and security, the transmission company (TRANSCO) has to make...

  8. Seasonal changes in epidermal ceramides are linked to impaired barrier function in acne patients.

    Science.gov (United States)

    Pappas, Apostolos; Kendall, Alexandra C; Brownbridge, Luke C; Batchvarova, Nikoleta; Nicolaou, Anna

    2018-01-21

    Acne skin demonstrates increased transepidermal water loss (TEWL) compared with healthy skin, which may be due, in part, to altered ceramide (CER) levels. We analysed ceramides in the stratum corneum of healthy and acne skin, and studied seasonal variation over the course of a year. Using ultraperformance liquid chromatography with electrospray ionisation and tandem mass spectrometry (UPLC/ESI-MS/MS), we identified 283 ceramides. Acne-affected skin demonstrated overall lower levels of ceramides, with notable reductions in CER[NH] and CER[AH] ceramides, as well as the acylceramides CER[EOS] and CER[EOH]; these differences were more apparent in the winter months. Lower ceramide levels reflected an increase in TEWL in acne, compared with healthy skin, which partly resolves in the summer. Individual ceramide species with 18-carbon 6-hydroxysphingosine (H) bases (including CER[N(24)H(18)], CER[N(26)H(18)], CER[A(24)H(18)], CER[A(26)H(18)]) were significantly reduced in acne skin, suggesting that CER[NH] and CER[AH] species may be particularly important in a healthy skin barrier. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  9. An empirical study on the institutional factors of energy conservation and emissions reduction: Evidence from listed companies in China

    International Nuclear Information System (INIS)

    Zhang, Zhaoguo; Jin, Xiaocui; Yang, Qingxiang; Zhang, Yi

    2013-01-01

    Corporate excessive energy consumption and emissions are negative externality problems, with the basic countermeasure of establishing a series of institutional programs to promote corporate energy conservation and emissions reduction. This paper analyzes the influence of institutional factors such as laws, tax policies, credit policies, government subsidies, media supervision and marketization degree on corporate energy conservation and emissions reduction from the institutional perspective. The data, from 84 listed Chinese chemical and steel companies from 2006 to 2010, was analyzed using both a fixed effect model and the generalized method of moments (GMM) model. The empirical results demonstrate that these institutional factors positively affect corporate energy conservation and emissions reduction. Specifically, four factors – tax policies, government subsidies, credit policies and media supervision – have a significant positive relationship with corporate energy conservation and emissions reduction; whereas laws and marketization degree exhibit no significant effects. The research findings are theoretically and practically significant to the Chinese government with regard to improving the institutional environment and promoting corporate energy conservation and emissions reduction. - Highlights: ► Theoretical analysis of the influence of institutional factors based on NIE. ► Empirical analysis of the influence of institutional factors on ECER by regression. ► Economic measures and public opinions have positive influence on ECER in China. ► Laws and the degree of marketization have weak influence on ECER in China

  10. Personalized Energy Reduction Cyber-Physical System (PERCS): A gamified end-user platform for energy efficiency and demand response.

    Energy Technology Data Exchange (ETDEWEB)

    Sintov, Nicole; Orosz, Michael; Schultz, P. Wesley

    2015-01-01

    The mission of the Personalized Energy Reduction Cyber-physical System (PERCS) is to create new possibilities for improving building operating efficiency, enhancing grid reliability, avoiding costly power interruptions, and mitigating greenhouse gas emissions. PERCS proposes to achieve these outcomes by engaging building occupants as partners in a user-centered smart service platform. Using a non-intrusive load monitoring approach, PERCS uses a single sensing point in each home to capture smart electric meter data in real time. The household energy signal is disaggregated into individual load signatures of common appliances (e.g., air conditioners), yielding near real-time appliance-level energy information. Users interact with PERCS via a mobile phone platform that provides household- and appliance-level energy feedback, tailored recommendations, and a competitive game tied to energy use and behavioral changes. PERCS challenges traditional energy management approaches by directly engaging occupant as key elements in a technological system.

  11. Caracterização de argilas e composição de massas cerâmicas preparadas com base na análise de curvas de consistência de misturas argila-água

    Directory of Open Access Journals (Sweden)

    M. M. T. Moreno

    2016-03-01

    Full Text Available Resumo Os produtos cerâmicos obtidos com argilas naturais são muito variados (tijolos, vasos, pisos e a maioria das matériasprimas possui alto conteúdo de ferro, apresentando tons avermelhados, principalmente após queima. Esta pesquisa estudou argilas utilizadas por uma fábrica de blocos cerâmicos localizada no polo Tatuí-Sorocaba - SP. Na caracterização das mesmas, foram abordados aspectos físico-químicos, geoquímicos, mineralógicos e cerâmicos com o intuito de analisar sua influência na composição de massas, as quais foram formuladas e processadas em laboratório com base na análise da consistência de misturas argila-água. Este método se mostrou promissor para controle de qualidade, melhor aproveitamento dos materiais e alternativas para ajuste da proporção dos componentes de uma massa.

  12. Fabricación y propiedades del carburo de silicio biomórfico: maderas cerámicas

    Directory of Open Access Journals (Sweden)

    Varela Feria, F. M.

    2002-08-01

    Full Text Available There is an increasing interest in the fabrication of materials with biomorphic microstructure. In particular, the fabrication of biomorphic ceramics would be of high interest because its high-temperature structural applications. The ceramics presented in this research were fabricated by the pyrolysis and infiltration with molten silicon of wood preforms. The final product is SiC with the same microstructure of the wood precursor. Wood is a natural composite that present an anisotropic porous microstructure with excellent elasticity, strength, and damage tolerance. Some of this properties will remain improved in the ceramic product. Biomorphic ceramics reach high strengths (700 MPa at 1150 oC for biomorphic SiC made from eucalyptus wood. The influence of the wood precursor and fabrication process in the mechanical and microstructural properties has been studied. The correlation microstructure-mechanical properties is discussed, as well as the application of the cellular theory of solids.

    En los últimos años se ha puesto de manifiesto un considerable interés en la fabricación y optimización de materiales de microestructura biomórfica. En particular, la fabricación de cerámicas biomórficas es especialmente importante ya que éstas pueden ser utilizadas en aplicaciones estructurales a temperaturas elevadas. Los materiales objeto de esta investigación se fabrican mediante la pirólisis e infiltración de silicio fundido en preformas de madera. El resultado final es SiC con la misma microestructura que la madera precursora. La madera es un material natural compuesto que presenta una morfología porosa anisotrópica con una excelente elasticidad, resistencia y tolerancia al daño; algunas de estas propiedades se trasladarán y amplificarán al pasar a la cerámica que se elabora a partir de la misma. Se ha estudiado la influencia de la madera seleccionada y el proceso de fabricación en las propiedades mecánicas y microestructurales

  13. Materiales y estructuras cerámicas para el diseño de quemadores de gas

    Directory of Open Access Journals (Sweden)

    Marín, R.

    2008-10-01

    Full Text Available Ceramic materials have been extensively used in the production of radiant gas burners since decades. The properties of these materials are well adapted for the development of burners: - High melting temperature, adequate for the high flame temperatures. - Good oxidation resistance, producing a long burner lifetime. - Extremely low thermal expansion coefficient, thus reducing thermo-mechanic stress. - Very low thermal conductivity, with strong temperature gradients through the burner head, thus avoiding flame flash-back. - High radiant efficiency, lowering the fumes temperature and NOx production. - Variety of burner shapes and structures: foams, holed plaques, fibres, etc. allowing to produce different burner types. As a consequence, a strong expansion of the ceramic materials application in the development of gas burners for the domestic, catering, and industrial sectors, has been experienced. From the surface radiant burners to the burners for hydrogen or the porous radiant burners, there is a wide range of possibilities for the design of ceramic gas burners. There is a sole requirement: to find out the proper combination material-structure.

    Los materiales cerámicos han sido utilizados en la fabricación de quemadores radiantes desde largo tiempo atrás. Ello se debe a que las propiedades de los materiales cerámicos resultan muy adecuadas para el desarrollo de quemadores: - Elevado punto de fusión, adecuado para soportar las elevadas temperaturas de la llama. - Elevada resistencia a la oxidación, que confiere a los quemadores larga vida sin degradación. - Muy bajo coeficiente de expansión térmica, que reduce las tensiones termomecánicas. - Muy baja conductividad térmica, con fuertes gradientes de temperatura a través del quemador que evitan el retroceso de llama. - Elevada eficiencia radiante, que reduce la temperatura de los humos y minimiza la producción de NOx. - Facilidad de conformado en diferentes

  14. Preparación y propiedades de materiales cerámicos bioinertes en el sistema Al2O3-TiO2-SiO2

    Directory of Open Access Journals (Sweden)

    Boccaccini, A. R.

    1998-12-01

    Full Text Available Very fine and sinterable ceramic powders (100-600 nm in the system Al2O3-TiO2-SiO2 were obtained by the method of cohydrolisis from organo-metallic precursors. Isostatically pressed powder compacts could be densified to a relative high density (~ 92 % th. density at relative low temperatures (1320-1380ºC. The technical coefficient of thermal expansion was measured by dilatometry. The value obtained (8.8 10-6 1/ºC corresponds closely to that of Ti, opening the possibility to use Al2O3-TiO2-SiO2 ceramics to fabricate metal/ceramic composite implants. The measured mechanical properties of dense sintered Al2O3-TiO2-SiO2 material: Young´s modulus, flexure strength and compression strength, are higher than those of pure TiO2. Highly porous Al2O3-TiO2-SiO2 ceramics (P~ 65% were obtained by the method of evaporation of hydrogen peroxide. These materials exhibited interconnected porosity and their properties, particularly the Young´s modulus, resulted very similar to those of bone, which is an important pre-requisite for the design of quirurgical implants.Se han obtenido polvos cerámicos muy finos (100- 600 nm y de alta sinterabilidad, en el sistema Al2O3-TiO2-SiO2, por el método de co-hidrólisis controlada a partir de precursores organo-metálicos. Los compactos fabricados a partir del polvo de cohidrólisis calcinado fueron sinterizados en el rango de temperaturas 1320-1380 ºC, obteniéndose densidades elevadas (~ 92% D.T.. El coeficiente de expansión térmica técnico del material cerámico sinterizado fue medido por dilatometría. El valor obtenido, 8.8 10-6 ºC-1, es muy similar al de titanio metálico y por lo tanto el material cerámico Al2O3-TiO2-SiO2 puede ser candidato para la fabricación de implantes compuestos cerámico/metal. Las propiedades mecánicas: módulo de elasticidad, resistencia a la flexión y resistencia a la compresión, del material denso sinterizado, fueron determinadas, resultando muy superiores a las de TiO2 puro

  15. Planeamiento estratégico de la industria peruana del vidrio, cerámico, refractarios y afines

    OpenAIRE

    Alva Ayllón, Antonio; Ayala Abad, Jonathan; Muñoz Gálvez, Carlos; Ruiz Reynaga, Juan

    2017-01-01

    xv, 170 h. : il. ; 30 cm. El presente documento consiste en la elaboración del Planeamiento Estratégico de la Industria del Vidrio, Cerámica, Refractarios y afines. El Plan estratégico fue desarrollado tomando en cuenta información actual e histórica respecto a la industria, así como también los factores externos e internos que intervienen en su ciclo productivo. La empresa pertenece al sector manufactura, del rubro Minerales no metálicos y se tiene una amplia información re...

  16. Relatório de Estágio Curricular – Aleluia Cerâmicas, S.A (Aveiro)

    OpenAIRE

    Pimenta, Cláudia

    2011-01-01

    O desenvolvimento do Estágio curricular foi realizado na empresa Aleluia Cerâmicas S.A. e teve a duração de 3 meses, 400horas. A estagiária teve oportunidade de conhecer de perto a realidade empresarial, experimentada em duas empresas do Grupo, na Ceramic e na Aleluia (sede da empresa), esta experiência que permitiu desenvolver mais competências, cimentando e evoluindo para além daquelas que foi adquirindo ao longo da sua formação académica. Foram desenvolvidas atividades variadas, entr...

  17. Energy Savings Calculations for Heat Island Reduction Strategies in Baton Rouge, Sacramento and Salt Lake City

    Energy Technology Data Exchange (ETDEWEB)

    Konopacki, S.; Akbari, H.

    2000-03-01

    In 1997, the US Environmental Protection Agency (EPA) established the ''Heat Island Reduction Initiative'', to quantify the potential benefits of Heat Island Reduction (HIR) strategies (i.e., shade trees, reflective roofs, reflective pavements and urban vegetation) to reduce cooling energy use in buildings, lower the ambient air temperature and improve urban air quality in cities, and reduce CO2 emissions from power plants. Under this initiative, the Urban Heat Island Pilot Project (UHIPP) was created with the objective to investigate the potential of HIR strategies in residential and commercial buildings in three initial UHIPP cities: Baton Rouge, Sacramento and Salt Lake City. This paper summarizes our efforts to calculate the annual energy savings, peak power avoidance and annual C02 reduction of HIR strategies in the three initial cities. In this analysis, we focused on three building types that offer most savings potential: single-family residence, office and retail store. Each building type was characterized in detail by old or new construction and with a gas furnace or an electric heat pump. We defined prototypical building characteristics for each building type and simulated the impact of HIR strategies on building cooling and heating energy use and peak power demand using the DOE-2.IE model. Our simulations included the impact of (1) strategically-placed shade trees near buildings [direct effect], (2) use of high-albedo roofing material on building [direct effect], (3) combined strategies I and 2 [direct effect], (4) urban reforestation with high-albedo pavements and building surfaces [indirect effect] and (5) combined strategies 1, 2 and 4 [direct and indirect effects]. We then estimated the total roof area of air-conditioned buildings in each city using readily obtainable data to calculate the metropolitan-wide impact of HIR strategies. The results show, that in Baton Rouge, potential annual energy savings of $15M could be realized by

  18. Reduction of energy cost and CO2 emission for the furnace using energy recovered from waste tail-gas

    International Nuclear Information System (INIS)

    Jou, Chih-Ju G.; Wu, Chung-Rung; Lee, Chien-Li

    2010-01-01

    In this research, the waste tail gas emitted from petrochemical processes, e.g. catalytic reforming unit, catalytic cracking unit and residue desulfurization unit, was recovered and reused as a replacement of natural gas (NG). On-site experimental results show that both the flame length and orange-yellowish brightness decrease with more proportion of waste gas fuel added to the natural gas, and that the adiabatic temperature of the mixed fuel is greater than 1800 o C. A complete replacement of natural gas by the recovered waste gas fuel will save 5.8 x 10 6 m 3 of natural gas consumption, and 3.5 x 10 4 tons of CO 2 emission annually. In addition, the reduction of residual O 2 concentration in flue gases from 4% to 3% will save 1.1 x 10 6 m 3 of natural gas consumption, reduce 43.0% of NO x emission, and 1.3 x 10 3 tons of CO 2 emission annually. Thus, from the viewpoint of the overall economics and sustainable energy policy, recovering the waste tail gas energy as an independent fuel source to replace natural gas is of great importance for saving energy, reducing CO 2 emission reduction, and lowering environmental impact.

  19. Soldagem unilateral com suporte cerâmico de cordierita One-sided welding with cordierite ceramic backing

    Directory of Open Access Journals (Sweden)

    Luciana Lezira Pereira de Almeida

    2010-06-01

    Full Text Available Este trabalho apresenta a avaliação de juntas soldadas com suporte cerâmico de cordierita produzido em laboratorio. Foi utilizada a técnica de soldagem unilateral em chapas de aço A-36 com espessuras de 6,4 e 15,8 mm pelo processo MIG-MAG. Com a chapa de 6,4 mm foi avalliado apenas o passe de raiz sobre o suporte cerâmico. Com a chapa de 15,8 mm foi produzida uma junta soldada em passes múltiplos. Após soldagem as juntas soldadas foram submetidas a ensaios de inspeção visual, liquido penetrante, macrografia, microdureza Vickers, microscopia ótica, ensaios de dobramento e de tração e análise química por EDS. Os resultados mostram que o passe de raiz, realizado sobre o suporte cerâmico, apresentou bom acabamento, isento de descontinuidades, com penetração adequada nas laterais do chanfro e reforço de solda apropriado. Em relação à junta soldada, a microestrutura da zona fundida (ZF obteve predominância de ferrita primária, em suas formas de ferrita de contorno de grão e poligonal, e ferrita com segunda fase alinhada. A microdureza Vickers obteve valores médios abaixo de 180 HV tanto na zona termicamente afetada (ZTA como na ZF. Os ensaios de dobramento não apresentaram descontinuidades maiores que 3 mm e nos ensaios de tração a ruptura ocorreu no metal base, indicando que o procedimento de soldagem foi adequado. A composição das inclusões tanto do passe de raiz como do ultimo passe de solda possuem os mesmos constituintes, apesar de proporções diferentes, indicando que não houve contaminação do material do suporte cerâmico no cordão de solda.This work presents the evaluation of welded joints using ceramic backing made in the laboratory. The one-sided welding technique was used to weld A-36 steel plate with 6,4 and 15,8 mm thick by the GMAW process. With the 6,4 mm steel plate, only the root bead welded over the ceramic backing was evaluated. With the 15,8 mm steel plate, a multipass welded joint was made

  20. Soldagem unilateral com suporte cerâmico de cordierita One-sided welding with cordierite ceramic backing

    Directory of Open Access Journals (Sweden)

    Luciana Lezira Pereira de Almeida

    2010-03-01

    Full Text Available Este trabalho apresenta a avaliação de juntas soldadas com suporte cerâmico de cordierita produzido em laboratorio. Foi utilizada a técnica de soldagem unilateral em chapas de aço A-36 com espessuras de 6,4 e 15,8 mm pelo processo MIG-MAG. Com a chapa de 6,4 mm foi avalliado apenas o passe de raiz sobre o suporte cerâmico. Com a chapa de 15,8 mm foi produzida uma junta soldada em passes múltiplos. Após soldagem as juntas soldadas foram submetidas a ensaios de inspeção visual, liquido penetrante, macrografia, microdureza Vickers, microscopia ótica, ensaios de dobramento e de tração e análise química por EDS. Os resultados mostram que o passe de raiz, realizado sobre o suporte cerâmico, apresentou bom acabamento, isento de descontinuidades, com penetração adequada nas laterais do chanfro e reforço de solda apropriado. Em relação à junta soldada, a microestrutura da zona fundida (ZF obteve predominância de ferrita primária, em suas formas de ferrita de contorno de grão e poligonal, e ferrita com segunda fase alinhada. A microdureza Vickers obteve valores médios abaixo de 180 HV tanto na zona termicamente afetada (ZTA como na ZF. Os ensaios de dobramento não apresentaram descontinuidades maiores que 3 mm e nos ensaios de tração a ruptura ocorreu no metal base, indicando que o procedimento de soldagem foi adequado. A composição das inclusões tanto do passe de raiz como do ultimo passe de solda possuem os mesmos constituintes, apesar de proporções diferentes, indicando que não houve contaminação do material do suporte cerâmico no cordão de solda.This work presents the evaluation of welded joints using ceramic backing made in the laboratory. The one-sided welding technique was used to weld A-36 steel plate with 6,4 and 15,8 mm thick by the GMAW process. With the 6,4 mm steel plate, only the root bead welded over the ceramic backing was evaluated. With the 15,8 mm steel plate, a multipass welded joint was made

  1. Potential reduction of carbon emissions from Crude Palm Oil production based on energy and carbon balances

    International Nuclear Information System (INIS)

    Patthanaissaranukool, Withida; Polprasert, Chongchin; Englande, Andrew J.

    2013-01-01

    Highlights: ► We evaluate energy and carbon equivalence from CPO production based on a CBM. ► Energy spent and produced via carbon movement from palm oil mill was determined. ► Scenarios were formulated to evaluate the potential reduction of carbon emission. ► Utilization of biomass from palm oil mill shows the high potential of C-reduction. -- Abstract: This study aimed to evaluate energy and carbon equivalences (CE) associated with palm oil milling and to evaluate sustainability alternatives for energy consumption. Appropriate ways to reduce carbon emissions were also evaluated. A field survey was carried out to quantify the input and output of energy and materials following the conceptual framework of a carbon-balanced model (CBM), which exclude other non-CO 2 greenhouse gases. Survey results indicate that the electrical energy consumption for daily mill start-up averaged 18.7 ± 5.4 kWh/ton Fresh Fruit Bunches (FFBs). This energy is equivalent to 114.4 ± 33.2 kWh/ton Crude Palm Oil (CPO) which was found to be offset by that generated in the mills using palm fiber as a solid fuel. Currently, organic residues contained in the wastewater are anaerobically converted to methane. The methane is used as fuel to generate electricity and sold to an outside grid network at a generation rate of 8.1 ± 2.1 kWh/ton FFB. Based on the CBM approach, carbon emissions observed from the use of fossil energy in palm oil milling were very small; however, total carbon emission from oil palm plantation and palm oil milling were found to be 12.3 kg CE/ton FFB, resulting in the net carbon reduction in CPO production of 2.8 kg CE/ton FFB or 53.7 kg CE/ha-y. Overall, the sum of C-reduction was found 1.2 times greater than that of C-emission. This figure can be increased up to 5.5, if all biomass by-products are used as fuel to generate electricity only. The full potential for carbon reduction from palm oil milling is estimated at 0.94 kW of electric power for every hectare of

  2. La evolución tecnológica del distrito cerámico de Castellón: la contribución de la industria de fritas, colores y esmaltes

    Directory of Open Access Journals (Sweden)

    Tortajada Esparza, E.

    2008-04-01

    Full Text Available The industrial district of Castellon is characterized by a great dynamism based on technological innovation, both product and process, the origins of which are to be found on its providers (1, the machinery industry and the frit, glaze and colours industry. In this paper the current situation of the frit, glaze and colour industry is analyzed, accounting also for the situation of its main European competitor in Italy. The formation and development of the industry is also described in relation to the industrial district and the innovation system where it belongs, together with the R&D activity, the innovation activity, and the main technological milestones that have made it become the world leader. The analysis shows the challenges to which this subsector, and more generally, the tile innovation system need to react to, by means of cooperation, in order to maintain the tile district leadership. Globalization implies new behaviours and one of the most relevant is the increase of cooperation among the different actors in the innovation system.

    El distrito industrial de Castellón se caracteriza por un gran dinamismo fundamentado en la innovación tecnológica, tanto de proceso como de producto, cuyo origen está básicamente en sus proveedores (1, la industria de equipamiento mecánico y la industria de fritas, esmaltes y colores cerámicos. En este artículo se analiza la situación actual de la industria de fritas, esmaltes y colores cerámicos española, atendiendo además a la situación de su mayor competidor europeo, Italia. Se describe también la formación y desarrollo de la industria en el entorno del distrito cerámico de Castellón y de su sistema de innovación, se analizan, asimismo la actividad en I+D e innovación así como los hitos tecnológicos que le han llevado a ocupar un liderazgo mundial. El análisis realizado identifica los retos frente a los que el subsector y, en general, el sistema de innovación cer

  3. Urban sound energy reduction by means of sound barriers

    Science.gov (United States)

    Iordache, Vlad; Ionita, Mihai Vlad

    2018-02-01

    In urban environment, various heating ventilation and air conditioning appliances designed to maintain indoor comfort become urban acoustic pollution vectors due to the sound energy produced by these equipment. The acoustic barriers are the recommended method for the sound energy reduction in urban environment. The current sizing method of these acoustic barriers is too difficult and it is not practical for any 3D location of the noisy equipment and reception point. In this study we will develop based on the same method a new simplified tool for acoustic barriers sizing, maintaining the same precision characteristic to the classical method. Abacuses for acoustic barriers sizing are built that can be used for different 3D locations of the source and the reception points, for several frequencies and several acoustic barrier heights. The study case presented in the article represents a confirmation for the rapidity and ease of use of these abacuses in the design of the acoustic barriers.

  4. Urban sound energy reduction by means of sound barriers

    Directory of Open Access Journals (Sweden)

    Iordache Vlad

    2018-01-01

    Full Text Available In urban environment, various heating ventilation and air conditioning appliances designed to maintain indoor comfort become urban acoustic pollution vectors due to the sound energy produced by these equipment. The acoustic barriers are the recommended method for the sound energy reduction in urban environment. The current sizing method of these acoustic barriers is too difficult and it is not practical for any 3D location of the noisy equipment and reception point. In this study we will develop based on the same method a new simplified tool for acoustic barriers sizing, maintaining the same precision characteristic to the classical method. Abacuses for acoustic barriers sizing are built that can be used for different 3D locations of the source and the reception points, for several frequencies and several acoustic barrier heights. The study case presented in the article represents a confirmation for the rapidity and ease of use of these abacuses in the design of the acoustic barriers.

  5. Achieving Realistic Energy and Greenhouse Gas Emission Reductions in U.S. Cities

    Science.gov (United States)

    Blackhurst, Michael F.

    2011-12-01

    In recognizing that energy markets and greenhouse gas emissions are significantly influences by local factors, this research examines opportunities for achieving realistic energy greenhouse gas emissions from U.S. cities through provisions of more sustainable infrastructure. Greenhouse gas reduction opportunities are examined through the lens of a public program administrator charged with reducing emissions given realistic financial constraints and authority over emissions reductions and energy use. Opportunities are evaluated with respect to traditional public policy metrics, such as benefit-cost analysis, net benefit analysis, and cost-effectiveness. Section 2 summarizes current practices used to estimate greenhouse gas emissions from communities. I identify improved and alternative emissions inventory techniques such as disaggregating the sectors reported, reporting inventory uncertainty, and aligning inventories with local organizations that could facilitate emissions mitigation. The potential advantages and challenges of supplementing inventories with comparative benchmarks are also discussed. Finally, I highlight the need to integrate growth (population and economic) and business as usual implications (such as changes to electricity supply grids) into climate action planning. I demonstrate how these techniques could improve decision making when planning reductions, help communities set meaningful emission reduction targets, and facilitate CAP implementation and progress monitoring. Section 3 evaluates the costs and benefits of building energy efficiency are estimated as a means of reducing greenhouse gas emissions in Pittsburgh, PA and Austin, TX. Two policy objectives were evaluated: maximize GHG reductions given initial budget constraints or maximize social savings given target GHG reductions. This approach explicitly evaluates the trade-offs between three primary and often conflicting program design parameters: initial capital constraints, social savings

  6. Energy reduction potential from the shift to electric vehicles: The Flores island case study

    International Nuclear Information System (INIS)

    Pina, André; Baptista, Patrícia; Silva, Carlos; Ferrão, Paulo

    2014-01-01

    The increase of fossil fuel demand raises concerns on availability of resources for future energy demand and on potential environmental impacts. Electric vehicles (EVs) appear as one alternative to shift from fossil fuels to renewable energy resources. This research work analyzes the benefits of the introduction of EVs in a small energy system, the Flores island, Azores, in terms of primary energy and CO 2 emissions. Four scenarios were designed considering different penetration rates of EVs (Low and High) and different time of recharging strategies (Fixed and Flexible). The high shares of RES in the electricity production system (60–62%) did not guarantee a significant use of RES for the recharging of EVs (10–40%), as the additional electricity required had to be produced mainly from the diesel generators. The flexible recharging strategies allowed doubling the share of RES in the recharging of the EVs when compared to fixed recharging, and consequently double the impact on the reduction of primary energy consumption and fossil fuels imports. While the reduction of primary energy ranged between 0.2% and 1.1%, for CO 2 emissions there was a decrease between 0.3 and 1.7%, proving that EVs can help improve the sustainability of energy systems. - highlights: • High shares of RES in electricity do not guarantee a low energy use by EVs. • The introduction of EVs can help reduce CO 2 emissions by 11% in 2030. • Flexible time of recharging strategies allows a 2.5 times higher share of RES

  7. Análise do impacto ambiental causado pela utilização de resíduo sólido do setor siderúrgico em cerâmica vermelha Environmental impact analysis caused by the use of siderurgy solid waste in red ceramics

    Directory of Open Access Journals (Sweden)

    G. E. de Oliveira

    2004-09-01

    Full Text Available O objetivo principal deste trabalho é o de avaliar do ponto de vista ambiental a possibilidade da incorporação de resíduo sólido proveniente do setor siderúrgico em massas argilosas para fabricação de cerâmica estrutural. A indústria cerâmica apresenta enorme potencial para absorver resíduos industriais poluentes. Até 3% em peso de resíduo foi adicionado em proporções graduais a uma massa argilosa. Os corpos cerâmicos foram conformados por extrusão, secados a 110 °C e queimados em forno industrial a 950 °C. Os corpos cerâmicos incorporados foram submetidos a ensaios ambientais de lixiviação e solubilidade. Além disso, foi feita a análise preliminar dos gases evoluídos durante o processo de queima. Os resultados revelaram que a utilização de massas cerâmicas contendo até 3% em peso de resíduo sólido de siderurgia, para fabricação de produtos de cerâmica vermelha, não oferece nenhum risco direto ao meio ambiente.The main objective of this work is to evaluate from an environmental viewpoint the incorporation of solid waste from the siderurgical industry into clayey masses for red ceramics. Ceramic masses containing up to 3 wt% waste were prepared. Ceramic bodies were extruded, dried at 110 °C and fired in an industrial kiln at 950 °C. Leaching and solubility tests were done on the incorporated ceramic bodies. In addition, the emission of gases was also analyzed. The results indicated that the use of up to 3 wt.% siderurgical solid waste in red ceramics does not cause significant environmental impact.

  8. Simultaneous Reduction in Noise and Cross-Contamination Artifacts for Dual-Energy X-Ray CT

    Directory of Open Access Journals (Sweden)

    Baojun Li

    2013-01-01

    Full Text Available Purpose. Dual-energy CT imaging tends to suffer from much lower signal-to-noise ratio than single-energy CT. In this paper, we propose an improved anticorrelated noise reduction (ACNR method without causing cross-contamination artifacts. Methods. The proposed algorithm diffuses both basis material density images (e.g., water and iodine at the same time using a novel correlated diffusion algorithm. The algorithm has been compared to the original ACNR algorithm in a contrast-enhanced, IRB-approved patient study. Material density accuracy and noise reduction are quantitatively evaluated by the percent density error and the percent noise reduction. Results. Both algorithms have significantly reduced the noises of basis material density images in all cases. The average percent noise reduction is 69.3% and 66.5% with the ACNR algorithm and the proposed algorithm, respectively. However, the ACNR algorithm alters the original material density by an average of 13% (or 2.18 mg/cc with a maximum of 58.7% (or 8.97 mg/cc in this study. This is evident in the water density images as massive cross-contaminations are seen in all five clinical cases. On the contrary, the proposed algorithm only changes the mean density by 2.4% (or 0.69 mg/cc with a maximum of 7.6% (or 1.31 mg/cc. The cross-contamination artifacts are significantly minimized or absent with the proposed algorithm. Conclusion. The proposed algorithm can significantly reduce image noise present in basis material density images from dual-energy CT imaging, with minimized cross-contaminations compared to the ACNR algorithm.

  9. Management Methods of Energy Efficiency and reduction of Greenhouse Gas Emissions

    International Nuclear Information System (INIS)

    Actina, G.; Grackova, L.; Zebergs, V.; Zeltins, N.

    2007-01-01

    The management methods of energy efficiency and reduction of GHG emissions and their introduction depend on the financing possibilities and the management structures. Analysis is made of the following methods for the management of the process of raising energy efficiency: an energy audit and certification; the third-party financing; networks for energy efficiency and services of raising energy efficiency. In Latvia more than a half of all the energy resources are consumed for heating and the supply of hot water. The thermal parameters of buildings are poor therefore wide introduction of buildings certification, based on energy audit is of particular importance. The third-party financing would allow resolving the justified problems of audit and certification in order to hasten the heating process of buildings, particularly, owing to the appearance of respective foreign third-party financing companies, although the privatisation of dwelling houses and reorganisation of their management is not yet completed. The networks for energy efficiency have not found supporters in Latvia, however, great importance is attached to the thermal parameters of industrial premises, which are as poor as in the other buildings of the country, and here is a considerable potential of energy economy. Concerning the services of raising energy efficiency, the management method of this process is supposed to reach maximum energy economy after thermo and technical renovation of buildings at their various stages. It is connected with general organisational and financial adjustment of the management of buildings, as well as with the development of the energy service company.(author)

  10. Process industry energy retrofits: the importance of emission baselines for greenhouse gas reductions

    International Nuclear Information System (INIS)

    Aadahl, Anders; Harvey, Simon; Berntsson, Thore

    2004-01-01

    Fuel combustion for heat and/or electric power production is often the largest contributor of greenhouse gas (GHG) emissions from an industrial process plant. Economically feasible options to reduce these emissions include fuel switching and retrofitting the plant's energy system. Process integration methods and tools can be used to evaluate potential retrofit measures. For assessing the GHG emissions reduction potential for the measures considered, it is also necessary to define appropriate GHG emission baselines. This paper presents a systematic GHG emission calculation method for retrofit situations including improved heat exchange, integration of combined heat and power (CHP) units, and combinations of both. The proposed method is applied to five different industrial processes in order to compare the impact of process specific parameters and energy market specific parameters. For potential GHG emission reductions the results from the applied study reveal that electricity grid emissions are significantly more important than differences between individual processes. Based on the results of the study, it is suggested that for sustainable investment decision considerations a conservative emission baseline is most appropriate. Even so, new industrial CHP in the Northern European energy market could play a significant role in the common effort to decrease GHG emissions

  11. Modeling of policies for reduction of GHG emissions in energy sector using ANN: case study-Croatia (EU).

    Science.gov (United States)

    Bolanča, Tomislav; Strahovnik, Tomislav; Ukić, Šime; Stankov, Mirjana Novak; Rogošić, Marko

    2017-07-01

    This study describes the development of tool for testing different policies for reduction of greenhouse gas (GHG) emissions in energy sector using artificial neural networks (ANNs). The case study of Croatia was elaborated. Two different energy consumption scenarios were used as a base for calculations and predictions of GHG emissions: the business as usual (BAU) scenario and sustainable scenario. Both of them are based on predicted energy consumption using different growth rates; the growth rates within the second scenario resulted from the implementation of corresponding energy efficiency measures in final energy consumption and increasing share of renewable energy sources. Both ANN architecture and training methodology were optimized to produce network that was able to successfully describe the existing data and to achieve reliable prediction of emissions in a forward time sense. The BAU scenario was found to produce continuously increasing emissions of all GHGs. The sustainable scenario was found to decrease the GHG emission levels of all gases with respect to BAU. The observed decrease was attributed to the group of measures termed the reduction of final energy consumption through energy efficiency measures.

  12. Energy and households : the acceptance of energy reduction options in relation to the performance and organisation of household activities = De acceptatie van energie reductieopties in relatie tot de uitvoering en organisatie van huishoudelijke activiteiten

    NARCIS (Netherlands)

    Uitdenbogerd, D.E.

    2007-01-01

    Changes in demand-side consumption structures are expected to be supportive in achieving long-term national energy reduction targets. Energy requirement can be distinguished in direct energy consumption through energy carriers, such as electricity and gas, and in indirect energy consumption used for

  13. Study on Laws, Regulations and Standards on Energy Efficiency, Energy Conserving and Emission Reduction of Industrial Boilers in EU

    Science.gov (United States)

    Liu, Ren; Zhao, Yuejin; Chen, Haihong; Liang, Xiuying; Yang, Ming

    2017-12-01

    Industrial boilers are widely applied in such fields as factory power, building heating, and people’s lives; China is the world’s largest producer and user of industrial boilers, with very high annual energy consumption; clear requirements have been put forward by China on the energy efficiency since the “11th Five-year Plan” with the hope to save energy and reduce emission by means of energy efficiency standards and regulations on the supervision and control of various special equipment. So far, the energy efficiency of industrial boilers in China has been improved significantly but there is still a gap with the EU states. This paper analyzes the policies of energy efficiency, implementation models and methods of supervision and implementation at the EU level from laws, regulations, directives as well as standards; the paper also puts forward suggestions of energy conserving and emission reduction on the improvement of energy conserving capacity of industrial boilers in China through studying the legislations and measures of the developed countries in energy conserving of boilers.

  14. Reduction in energy consumption and operating cost in a dried corn warehouse using logistics techniques

    Directory of Open Access Journals (Sweden)

    Korrakot Y. Tippayawong

    2013-06-01

    Full Text Available Corn is one of the major economic crops in Thailand. Corn postharvest operation involves various practices that consume a large amount of energy. Different energy conservation measures have been implemented but logistics consideration is not normally employed. In this work, attempt has been made to demonstrate that logistics techniques can offer a significant reduction in energy and cost. The main objective of this work is to identify and demonstrate possible approaches to improving energy efficiency and reducing operating cost for a dried corn warehouse operator. Three main problems are identified: (i relatively high fuel consumption for internal transfer process, (ii low quality of dried corn, and (iii excess expenditure on outbound transportation. Solutions are proposed and implemented using logistics operations. Improvement is achieved using plant layout and shortest path techniques, resulting in a reduction of almost 50% in energy consumption for the internal transfer process. Installation of an air distributor in the grain storage unit results in a decrease in loss due to poor-quality dried corn from 17% to 10%. Excess expenditure on dried corn distribution is reduced by 6% with application of a global positioning system.

  15. La cerámica pintada de tradición indígena en las áreas ibéricas de la Hispania romana

    OpenAIRE

    Abascal Palazón, Juan Manuel

    1992-01-01

    Contribución a un workshop de la Societat Catalana d'Arqueologia que tuvo lugar en 1992 en Barcelona. Análisis global de la producción de cerámica pintada de época romana en la costa mediterránea de la Península Ibérica.

  16. Energy use, emissions and air pollution reduction strategies in Asia

    International Nuclear Information System (INIS)

    Foell, W.; Green, C.; Amann, M.; Bhattacharya, S.; Carmichael, G.; Chadwick, M.; Cinderby, S.; Haugland, T.; Hettelingh, J.-P.; Hordijk, L.; Kuylenstierna, J.; Shah, J.; Shrestha, R.; Streets, D.; Zhao, D.

    1995-01-01

    In contrast to Europe and North America, air pollution in Asia is increasing rapidly, resulting in both local air quality problems and higher acidic depositions. In 1989, an east-west group of scientists initiated a multi-institutional research project on Acid Rain and Emissions Reduction in Asia, funded for the past two years by the World Bank and the Asian Development Bank. Phase I, covering 23 countries of Asia, focused on the development of PC-based software called the Regional Air Pollution Information and Simulation Model (RAINS-ASIA). A 94-region Regional Energy Scenario Generator was developed to create alternative energy/emission scenarios through the year 2020. A long-range atmospheric transport model was developed to calculate dispersion and deposition of sulfur, based upon emissions from area and large point sources, on a one-degree grid of Asia. The resulting impacts of acidic deposition on a variety of vegetation types were analyzed using the critical loads approach to test different emissions management strategies, including both energy conservation measures and sulfur abatement technologies. 14 refs., 7 figs

  17. [Synergistic emission reduction of chief air pollutants and greenhouse gases-based on scenario simulations of energy consumptions in Beijing].

    Science.gov (United States)

    Xie, Yuan-bo; Li, Wei

    2013-05-01

    It is one of the common targets and important tasks for energy management and environmental control of Beijing to improve urban air quality while reducing the emissions of greenhouse gases (GHG). Here, based on the interim and long term developmental planning and energy structure of the city, three energy consumption scenarios in low, moderate and high restrictions were designed by taking the potential energy saving policies and environmental targets into account. The long-range energy alternatives planning (LEAP) model was employed to predict and evaluate reduction effects of the chief air pollutants and GHG during 2010 to 2020 under the three given scenarios. The results showed that if urban energy consumption system was optimized or adjusted by exercising energy saving and emission reduction and pollution control measures, the predicted energy uses will be reduced by 10 to 30 million tons of coal equivalents by 2020. Under the two energy scenarios with moderate and high restrictions, the anticipated emissions of SO2, NOx, PM10, PM2.5, VOC and GHG will be respectively reduced to 71 to 100.2, 159.2 to 218.7, 89.8 to 133.8, 51.4 to 96.0, 56.4 to 74.8 and 148 200 to 164 700 thousand tons. Correspondingly, when compared with the low-restriction scenario, the reducing rate will be 53% to 67% , 50% to 64% , 33% to 55% , 25% to 60% , 41% to 55% and 26% to 34% respectively. Furthermore, based on a study of synergistic emission reduction of the air pollutants and GHG, it was proposed that the adjustment and control of energy consumptions shall be intensively develope