WorldWideScience

Sample records for energy level statistics

  1. Information Geometry, Inference Methods and Chaotic Energy Levels Statistics

    OpenAIRE

    Cafaro, Carlo

    2008-01-01

    In this Letter, we propose a novel information-geometric characterization of chaotic (integrable) energy level statistics of a quantum antiferromagnetic Ising spin chain in a tilted (transverse) external magnetic field. Finally, we conjecture our results might find some potential physical applications in quantum energy level statistics.

  2. Parametric Statistics of Individual Energy Levels in Random Hamiltonians

    OpenAIRE

    Smolyarenko, I. E.; Simons, B. D.

    2002-01-01

    We establish a general framework to explore parametric statistics of individual energy levels in disordered and chaotic quantum systems of unitary symmetry. The method is applied to the calculation of the universal intra-level parametric velocity correlation function and the distribution of level shifts under the influence of an arbitrary external perturbation.

  3. Electron Energy Level Statistics in Graphene Quantum Dots

    NARCIS (Netherlands)

    De Raedt, H.; Katsnellson, M. I.; Katsnelson, M.I.

    2008-01-01

    Motivated by recent experimental observations of size quantization of electron energy levels in graphene quantum dots [7] we investigate the level statistics in the simplest tight-binding model for different dot shapes by computer simulation. The results are in a reasonable agreement with the

  4. Energy-level statistics and time relaxation in quantum systems

    International Nuclear Information System (INIS)

    Gruver, J.L.; Cerdeira, H.A.; Aliaga, J.; Mello, P.A.; Proto, A.N.

    1997-05-01

    We study a quantum-mechanical system, prepared, at t = 0, in a model state, that subsequently decays into a sea of other states whose energy levels form a discrete spectrum with given statistical properties. An important quantity is the survival probability P(t), defined as the probability, at time t, to find the system in the original model state. Our main purpose is to analyze the influence of the discreteness and statistical properties of the spectrum on the behavior of P(t). Since P(t) itself is a statistical quantity, we restrict our attention to its ensemble average , which is calculated analytically using random-matrix techniques, within certain approximations discussed in the text. We find, for , an exponential decay, followed by a revival, governed by the two-point structure of the statistical spectrum, thus giving a nonzero asymptotic value for large t's. The analytic result compares well with a number of computer simulations, over a time range discussed in the text. (author). 17 refs, 1 fig

  5. Statistical interpretation of low energy nuclear level schemes

    Energy Technology Data Exchange (ETDEWEB)

    Egidy, T von; Schmidt, H H; Behkami, A N

    1988-01-01

    Nuclear level schemes and neutron resonance spacings yield information on level densities and level spacing distributions. A total of 75 nuclear level schemes with 1761 levels and known spins and parities was investigated. The A-dependence of level density parameters is discussed. The spacing distributions of levels near the groundstate indicate transitional character between regular and chaotic properties while chaos dominates near the neutron binding energy.

  6. Energy Statistics

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    For the years 1992 and 1993, part of the figures shown in the tables of the Energy Review are preliminary or estimated. The annual statistics of the Energy Review appear in more detail from the publication Energiatilastot - Energy Statistics issued annually, which also includes historical time series over a longer period. The tables and figures shown in this publication are: Changes in the volume of GNP and energy consumption; Coal consumption; Natural gas consumption; Peat consumption; Domestic oil deliveries; Import prices of oil; Price development of principal oil products; Fuel prices for power production; Total energy consumption by source; Electricity supply; Energy imports by country of origin in 1993; Energy exports by recipient country in 1993; Consumer prices of liquid fuels; Consumer prices of hard coal and natural gas, prices of indigenous fuels; Average electricity price by type of consumer; Price of district heating by type of consumer and Excise taxes and turnover taxes included in consumer prices of some energy sources

  7. Energy statistics

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    World data from the United Nation's latest Energy Statistics Yearbook, first published in our last issue, are completed here. The 1984-86 data were revised and 1987 data added for world commercial energy production and consumption, world natural gas plant liquids production, world LP-gas production, imports, exports, and consumption, world residual fuel oil production, imports, exports, and consumption, world lignite production, imports, exports, and consumption, world peat production and consumption, world electricity production, imports, exports, and consumption (Table 80), and world nuclear electric power production

  8. A random matrix approach to the crossover of energy-level statistics from Wigner to Poisson

    International Nuclear Information System (INIS)

    Datta, Nilanjana; Kunz, Herve

    2004-01-01

    We analyze a class of parametrized random matrix models, introduced by Rosenzweig and Porter, which is expected to describe the energy level statistics of quantum systems whose classical dynamics varies from regular to chaotic as a function of a parameter. We compute the generating function for the correlations of energy levels, in the limit of infinite matrix size. The crossover between Poisson and Wigner statistics is measured by a renormalized coupling constant. The model is exactly solved in the sense that, in the limit of infinite matrix size, the energy-level correlation functions and their generating function are given in terms of a finite set of integrals

  9. Energy statistics manual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    Detailed, complete, timely and reliable statistics are essential to monitor the energy situation at a country level as well as at an international level. Energy statistics on supply, trade, stocks, transformation and demand are indeed the basis for any sound energy policy decision. For instance, the market of oil -- which is the largest traded commodity worldwide -- needs to be closely monitored in order for all market players to know at any time what is produced, traded, stocked and consumed and by whom. In view of the role and importance of energy in world development, one would expect that basic energy information to be readily available and reliable. This is not always the case and one can even observe a decline in the quality, coverage and timeliness of energy statistics over the last few years.

  10. Random matrix theory of the energy-level statistics of disordered systems at the Anderson transition

    Energy Technology Data Exchange (ETDEWEB)

    Canali, C M

    1995-09-01

    We consider a family of random matrix ensembles (RME) invariant under similarity transformations and described by the probability density P(H) exp[-TrV(H)]. Dyson`s mean field theory (MFT) of the corresponding plasma model of eigenvalues is generalized to the case of weak confining potential, V(is an element of) {approx} A/2 ln{sup 2}(is an element of). The eigenvalue statistics derived from MFT are shown to deviate substantially from the classical Wigner-Dyson statistics when A < 1. By performing systematic Monte Carlo simulations on the plasma model, we compute all the relevant statistical properties of the RME with weak confinement. For A{sub c} approx. 0.4 the distribution function of the level spacings (LSDF) coincides in a large energy window with the energy LSDF of the three dimensional Anderson model at the metal-insulator transition. For the same A = A{sub c}, the RME eigenvalue-number variance is linear and its slope is equal to 0.32 {+-} 0.02, which is consistent with the value found for the Anderson model at the critical point. (author). 51 refs, 10 figs.

  11. Random matrix theory of the energy-level statistics of disordered systems at the Anderson transition

    International Nuclear Information System (INIS)

    Canali, C.M.

    1995-09-01

    We consider a family of random matrix ensembles (RME) invariant under similarity transformations and described by the probability density P(H) exp[-TrV(H)]. Dyson's mean field theory (MFT) of the corresponding plasma model of eigenvalues is generalized to the case of weak confining potential, V(is an element of) ∼ A/2 ln 2 (is an element of). The eigenvalue statistics derived from MFT are shown to deviate substantially from the classical Wigner-Dyson statistics when A c approx. 0.4 the distribution function of the level spacings (LSDF) coincides in a large energy window with the energy LSDF of the three dimensional Anderson model at the metal-insulator transition. For the same A = A c , the RME eigenvalue-number variance is linear and its slope is equal to 0.32 ± 0.02, which is consistent with the value found for the Anderson model at the critical point. (author). 51 refs, 10 figs

  12. 2002 energy statistics

    International Nuclear Information System (INIS)

    2003-01-01

    This report has 12 chapters. The first chapter includes world energy reserves, the second chapter is about world primary energy production and consumption condition. Other chapters include; world energy prices, energy reserves in Turkey, Turkey primary energy production and consumption condition, Turkey energy balance tables, Turkey primary energy reserves production, consumption, imports and exports conditions, sectoral energy consumptions, Turkey secondary electricity plants, Turkey energy investments, Turkey energy prices.This report gives world and Turkey statistics on energy

  13. Wind energy statistics

    International Nuclear Information System (INIS)

    Holttinen, H.; Tammelin, B.; Hyvoenen, R.

    1997-01-01

    The recording, analyzing and publishing of statistics of wind energy production has been reorganized in cooperation of VTT Energy, Finnish Meteorological (FMI Energy) and Finnish Wind Energy Association (STY) and supported by the Ministry of Trade and Industry (KTM). VTT Energy has developed a database that contains both monthly data and information on the wind turbines, sites and operators involved. The monthly production figures together with component failure statistics are collected from the operators by VTT Energy, who produces the final wind energy statistics to be published in Tuulensilmae and reported to energy statistics in Finland and abroad (Statistics Finland, Eurostat, IEA). To be able to verify the annual and monthly wind energy potential with average wind energy climate a production index in adopted. The index gives the expected wind energy production at various areas in Finland calculated using real wind speed observations, air density and a power curve for a typical 500 kW-wind turbine. FMI Energy has produced the average figures for four weather stations using the data from 1985-1996, and produces the monthly figures. (orig.)

  14. Energy statistics yearbook 2002

    International Nuclear Information System (INIS)

    2005-01-01

    The Energy Statistics Yearbook 2002 is a comprehensive collection of international energy statistics prepared by the United Nations Statistics Division. It is the forty-sixth in a series of annual compilations which commenced under the title World Energy Supplies in Selected Years, 1929-1950. It updates the statistical series shown in the previous issue. Supplementary series of monthly and quarterly data on production of energy may be found in the Monthly Bulletin of Statistics. The principal objective of the Yearbook is to provide a global framework of comparable data on long-term trends in the supply of mainly commercial primary and secondary forms of energy. Data for each type of fuel and aggregate data for the total mix of commercial fuels are shown for individual countries and areas and are summarized into regional and world totals. The data are compiled primarily from the annual energy questionnaire distributed by the United Nations Statistics Division and supplemented by official national statistical publications. Where official data are not available or are inconsistent, estimates are made by the Statistics Division based on governmental, professional or commercial materials. Estimates include, but are not limited to, extrapolated data based on partial year information, use of annual trends, trade data based on partner country reports, breakdowns of aggregated data as well as analysis of current energy events and activities

  15. Energy statistics yearbook 2001

    International Nuclear Information System (INIS)

    2004-01-01

    The Energy Statistics Yearbook 2001 is a comprehensive collection of international energy statistics prepared by the United Nations Statistics Division. It is the forty-fifth in a series of annual compilations which commenced under the title World Energy Supplies in Selected Years, 1929-1950. It updates the statistical series shown in the previous issue. Supplementary series of monthly and quarterly data on production of energy may be found in the Monthly Bulletin of Statistics. The principal objective of the Yearbook is to provide a global framework of comparable data on long-term trends in the supply of mainly commercial primary and secondary forms of energy. Data for each type of fuel and aggregate data for the total mix of commercial fuels are shown for individual countries and areas and are summarized into regional and world totals. The data are compiled primarily from the annual energy questionnaire distributed by the United Nations Statistics Division and supplemented by official national statistical publications. Where official data are not available or are inconsistent, estimates are made by the Statistics Division based on governmental, professional or commercial materials. Estimates include, but are not limited to, extrapolated data based on partial year information, use of annual trends, trade data based on partner country reports, breakdowns of aggregated data as well as analysis of current energy events and activities

  16. Energy statistics yearbook 2000

    International Nuclear Information System (INIS)

    2002-01-01

    The Energy Statistics Yearbook 2000 is a comprehensive collection of international energy statistics prepared by the United Nations Statistics Division. It is the forty-third in a series of annual compilations which commenced under the title World Energy Supplies in Selected Years, 1929-1950. It updates the statistical series shown in the previous issue. Supplementary series of monthly and quarterly data on production of energy may be found in the Monthly Bulletin of Statistics. The principal objective of the Yearbook is to provide a global framework of comparable data on long-term trends in the supply of mainly commercial primary and secondary forms of energy. Data for each type of fuel and aggregate data for the total mix of commercial fuels are shown for individual countries and areas and are summarized into regional and world totals. The data are compiled primarily from the annual energy questionnaire distributed by the United Nations Statistics Division and supplemented by official national statistical publications. Where official data are not available or are inconsistent, estimates are made by the Statistics Division based on governmental, professional or commercial materials. Estimates include, but are not limited to, extrapolated data based on partial year information, use of annual trends, trade data based on partner country reports, breakdowns of aggregated data as well as analysis of current energy events and activities

  17. Swiss energy statistics 2006

    International Nuclear Information System (INIS)

    2007-01-01

    This comprehensive report by the Swiss Federal Office of Energy (SFOE) presents statistics on energy production and consumption in Switzerland in 2006. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The report also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2006 and energy use in various sectors are presented. Also, the Swiss energy balance with reference to the use of renewable forms of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power. The third chapter provides data on the individual energy carriers and the final chapter looks at economical and ecological aspects. An appendix provides information on the methodology used in collecting the statistics and on data available in the Swiss cantons

  18. Swiss energy statistics 2004

    International Nuclear Information System (INIS)

    2005-01-01

    This comprehensive report by the Swiss Federal Office of Energy (SFOE) presents statistics on energy production and consumption in Switzerland in 2004. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The report also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2004 and energy use in various sectors are presented. Also, the Swiss energy balance with reference to the use of renewable forms of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power. The third chapter provides data on the individual energy carriers and the final chapter looks at economical and ecological aspects. An appendix provides information on the methodology used in collecting the statistics and on data available in the Swiss cantons

  19. Swiss energy statistics 2005

    International Nuclear Information System (INIS)

    2006-01-01

    This comprehensive report by the Swiss Federal Office of Energy (SFOE) presents statistics on energy production and consumption in Switzerland in 2005. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The report also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2005 and energy use in various sectors are presented. Also, the Swiss energy balance with reference to the use of renewable forms of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power. The third chapter provides data on the individual energy carriers and the final chapter looks at economical and ecological aspects. An appendix provides information on the methodology used in collecting the statistics and on data available in the Swiss cantons

  20. Swiss energy statistics 2003

    International Nuclear Information System (INIS)

    2004-01-01

    This comprehensive report by the Swiss Federal Office of Energy (SFOE) presents statistics on energy production and consumption in Switzerland in 2003. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The report also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2003 and energy use in various sectors are presented. Also, the Swiss energy balance with reference to the use of renewable forms of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power. The third chapter provides data on the individual energy carriers and the final chapter looks at economical and ecological aspects. An appendix provides information on the methodology used in collecting the statistics and on data available in the Swiss cantons

  1. Swiss energy statistics 2002

    International Nuclear Information System (INIS)

    2003-01-01

    This comprehensive report by the Swiss Federal Office of Energy (SFOE) presents statistics on energy production and consumption in Switzerland in 2002. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The report also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2002 and energy use in various sectors are presented. Also, the Swiss energy balance with reference to the use of renewable forms of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power. The third chapter provides data on the individual energy carriers and the final chapter looks at economical and ecological aspects. An appendix provides information on the methodology used in collecting the statistics and on data available in the Swiss cantons

  2. Energy statistics manual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The Manual is written in a question-and-answer format. The points developed are introduced with a basic question, such as: What do people mean by 'fuels' and 'energy'? What units are used to express oil? How are energy data presented? Answers are given in simple terms and illustrated by graphs, charts and tables. More technical explanations are found in the annexes. The Manual contains seven chapters. The first one presents the fundamentals of energy statistics, five chapters deal with the five different fuels (electricity and heat; natural gas; oil; solid fuels and manufactured gases; renewables and waste) and the last chapter explains the energy balance. Three technical annexes and a glossary are also included. For the five chapters dedicated to the fuels, there are three levels of reading: the first one contains general information on the subject, the second one reviews issues which are specific to the joint IEA/OECD-Eurostat-UNECE questionnaires and the third one focuses on the essential elements of the subject. 43 figs., 22 tabs., 3 annexes.

  3. Energy statistics. France

    International Nuclear Information System (INIS)

    2002-10-01

    This document summarizes in a series of tables the energy statistical data for France: consumption since 1973; energy supplies (production, imports, exports, stocks) and uses (refining, power production, internal uses, sectoral consumption) for coal, petroleum, gas, electricity, and renewable energy sources; national production and consumption of primary energy; final consumption per sector and per energy source; general indicators (energy bill, US$ change rate, prices, energy independence, internal gross product); projections. Details (resources, uses, prices, imports, internal consumption) are given separately for petroleum, natural gas, electric power and solid mineral fuels. (J.S.)

  4. Swiss energy statistics 2010

    International Nuclear Information System (INIS)

    2011-01-01

    This comprehensive report presents the Swiss Federal Office of Energy's statistics on energy production and consumption in Switzerland in 2010. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The report also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2010 and energy use in various sectors are presented. The Swiss energy balance with reference to the use of renewable sources of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power. In the third chapter, details are given related to each energy carrier. The final chapter deals with economical and environmental aspects

  5. Swiss energy statistics 2007

    International Nuclear Information System (INIS)

    2008-01-01

    This comprehensive report presents the Swiss Federal Office of Energy's statistics on energy production and consumption in Switzerland in 2007. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The article also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2007 and energy use in various sectors are presented. Finally, the Swiss energy balance with reference to the use of renewable sources of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power

  6. Swiss energy statistics 2000

    International Nuclear Information System (INIS)

    2001-01-01

    This comprehensive report presents the Swiss Federal Office of Energy's statistics on energy production and consumption in Switzerland in 2000. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The article also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2000 and energy use in various sectors are presented. Finally, the Swiss energy balance with reference to the use of renewable sources of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power

  7. Swiss energy statistics 2001

    International Nuclear Information System (INIS)

    2002-01-01

    This comprehensive report presents the Swiss Federal Office of Energy's statistics on energy production and consumption in Switzerland in 2001. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The article also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2001 and energy use in various sectors are presented. Finally, the Swiss energy balance with reference to the use of renewable sources of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power

  8. Energy Statistics Manual [Arabic version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    Detailed, complete, timely and reliable statistics are essential to monitor the energy situation at a country level as well as at an international level. Energy statistics on supply, trade, stocks, transformation and demand are indeed the basis for any sound energy policy decision. For instance, the market of oil -- which is the largest traded commodity worldwide -- needs to be closely monitored in order for all market players to know at any time what is produced, traded, stocked and consumed and by whom. In view of the role and importance of energy in world development, one would expect that basic energy information to be readily available and reliable. This is not always the case and one can even observe a decline in the quality, coverage and timeliness of energy statistics over the last few years.

  9. Energy Statistics Manual; Handbuch Energiestatistik

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    Detailed, complete, timely and reliable statistics are essential to monitor the energy situation at a country level as well as at an international level. Energy statistics on supply, trade, stocks, transformation and demand are indeed the basis for any sound energy policy decision. For instance, the market of oil -- which is the largest traded commodity worldwide -- needs to be closely monitored in order for all market players to know at any time what is produced, traded, stocked and consumed and by whom. In view of the role and importance of energy in world development, one would expect that basic energy information to be readily available and reliable. This is not always the case and one can even observe a decline in the quality, coverage and timeliness of energy statistics over the last few years.

  10. Key World Energy Statistics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    The IEA produced its first handy, pocket-sized summary of key energy data in 1997. This new edition responds to the enormously positive reaction to the book since then. Key World Energy Statistics produced by the IEA contains timely, clearly-presented data on supply, transformation and consumption of all major energy sources. The interested businessman, journalist or student will have at his or her fingertips the annual Canadian production of coal, the electricity consumption in Thailand, the price of diesel oil in Spain and thousands of other useful energy facts. It exists in different formats to suit our readers' requirements.

  11. Energy statistics 1999

    International Nuclear Information System (INIS)

    2000-10-01

    Denmark's gross energy consumption increased in 1999 with almost 0,5% while the CO 2 emission decreased with 1,4%. Energy Statistics 1999 shows that the energy consumption in households and the production industries was the same as the year before. The consumption in the trade and service sectors and for transportation increased. The Danish production of petroleum, natural gas and renewable energy increased in 1999 to 1000 PJ which is an increase of 17% compared to 1998. The degree of self-supply increased to 118%, which means that the energy production was 18% higher than the energy consumption in 1999. This was primarily due to a very high increase of production of petroleum of 26%. (LN)

  12. Energy Statistics Manual; Manual Statistik Energi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    Detailed, complete, timely and reliable statistics are essential to monitor the energy situation at a country level as well as at an international level. Energy statistics on supply, trade, stocks, transformation and demand are indeed the basis for any sound energy policy decision. For instance, the market of oil -- which is the largest traded commodity worldwide -- needs to be closely monitored in order for all market players to know at any time what is produced, traded, stocked and consumed and by whom. In view of the role and importance of energy in world development, one would expect that basic energy information to be readily available and reliable. This is not always the case and one can even observe a decline in the quality, coverage and timeliness of energy statistics over the last few years.

  13. 1992 Energy statistics Yearbook

    International Nuclear Information System (INIS)

    1994-01-01

    The principal objective of the Yearbook is to provide a global framework of comparable data on long-term trends in the supply of mainly commercial primary and secondary forms of energy. Data for each type of fuel and aggregate data for the total mix of commercial fuels are shown for individual countries and areas and are summarized into regional and world totals. The data are compiled primarily from annual questionnaires distributed by the United Nations Statistical Division and supplemented by official national statistical publications. Where official data are not available or are inconsistent, estimates are made by the Statistical Division based on governmental, professional or commercial materials. Estimates include, but are not limited to, extrapolated data based on partial year information, use of annual trends, trade data based on partner country reports, breakdowns of aggregated data as well as analysis of current energy events and activities

  14. Random Matrix Theory of the Energy-Level Statistics of Disordered Systems at the Anderson Transition

    OpenAIRE

    Canali, C. M.

    1995-01-01

    We consider a family of random matrix ensembles (RME) invariant under similarity transformations and described by the probability density $P({\\bf H})= \\exp[-{\\rm Tr}V({\\bf H})]$. Dyson's mean field theory (MFT) of the corresponding plasma model of eigenvalues is generalized to the case of weak confining potential, $V(\\epsilon)\\sim {A\\over 2}\\ln ^2(\\epsilon)$. The eigenvalue statistics derived from MFT are shown to deviate substantially from the classical Wigner-Dyson statistics when $A

  15. Energy statistical data. Europe

    International Nuclear Information System (INIS)

    2002-04-01

    This report summarizes in a series of tables the key energy data of 1999 for 9 European countries (Germany, Belgium, Denmark, Spain, France, Italy, Netherlands, UK, Sweden). Data concern: the energy intensity, the share of renewable energy sources in the total primary consumption, the structure of power production, the CO 2 emissions and their structure, and the end-use, primary consumption and energy prices per energy source. (J.S.)

  16. Australian energy statistics - Australian energy update 2005

    Energy Technology Data Exchange (ETDEWEB)

    Donaldson, K.

    2005-06-15

    ABARE's energy statistics include comprehensive coverage of Australian energy consumption, by state, by industry and by fuel. Australian Energy Update 2005 provides an overview of recent trends and description of the full coverage of the dataset. There are 14 Australian energy statistical tables available as free downloads (product codes 13172 to 13185).

  17. Energy statistics yearbook

    International Nuclear Information System (INIS)

    2002-06-01

    This document summarizes in a series of tables and graphs the evolution of the world energy production, consumption, imports, exports and stock changes since 1996 with some details about the consumption per sector, per country, and per energy source (petroleum products, natural gas, coal and lignite, electricity). The evolution of the CO 2 emissions per country and since 1990 are also given. (J.S.)

  18. Key China Energy Statistics 2012

    Energy Technology Data Exchange (ETDEWEB)

    Levine, Mark [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fridley, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lu, Hongyou [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fino-Chen, Cecilia [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-05-01

    The China Energy Group at Lawrence Berkeley National Laboratory (LBNL) was established in 1988. Over the years the Group has gained recognition as an authoritative source of China energy statistics through the publication of its China Energy Databook (CED). The Group has published seven editions to date of the CED (http://china.lbl.gov/research/chinaenergy-databook). This handbook summarizes key statistics from the CED and is expressly modeled on the International Energy Agency’s “Key World Energy Statistics” series of publications. The handbook contains timely, clearly-presented data on the supply, transformation, and consumption of all major energy sources.

  19. Key China Energy Statistics 2011

    Energy Technology Data Exchange (ETDEWEB)

    Levine, Mark [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fridley, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lu, Hongyou [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fino-Chen, Cecilia [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-01-15

    The China Energy Group at Lawrence Berkeley National Laboratory (LBNL) was established in 1988. Over the years the Group has gained recognition as an authoritative source of China energy statistics through the publication of its China Energy Databook (CED). In 2008 the Group published the Seventh Edition of the CED (http://china.lbl.gov/research/chinaenergy-databook). This handbook summarizes key statistics from the CED and is expressly modeled on the International Energy Agency’s “Key World Energy Statistics” series of publications. The handbook contains timely, clearly-presented data on the supply, transformation, and consumption of all major energy sources.

  20. Energy Level Statistics of SO(5) Limit of Super-symmetry U(6/4) in Interacting Boson-Fermion Model

    International Nuclear Information System (INIS)

    Bai Hongbo; Zhang Jinfu; Zhou Xianrong

    2005-01-01

    We study the energy level statistics of the SO(5) limit of super-symmetry U(6/4) in odd-A nucleus using the interacting boson-fermion model. The nearest neighbor spacing distribution (NSD) and the spectral rigidity (Δ 3 ) are investigated, and the factors that affect the properties of level statistics are also discussed. The results show that the boson number N is a dominant factor. If N is small, both the interaction strengths of subgroups SO B (5) and SO BF (5) and the spin play important roles in the energy level statistics, however, along with the increase of N, the statistics distribution would tend to be in Poisson form.

  1. Key World Energy Statistics 2012

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    Key World Energy Statistics contains timely, clearly-presented data on supply, transformation and consumption of all major energy sources. The interested businessman, journalist or student will have at his or her fingertips the annual Canadian production of coal, the electricity consumption in Thailand, the price of diesel oil in Spain and thousands of other useful energy facts.

  2. Swiss overall energy statistics 1979

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    The comprehensive statistics are produced by the Federal Department of Energy and the Swiss National Committee of the World Energy Conference, and are divided into three sections, (1) Consumption of energy in 1979, (2) Development of the energy balance-sheet from 1974 to 1979, and (3) Comments relative to the energy balance-sheet. Appendices are also included giving tables of energy consumption in the year 1950 and for the period 1960 - 1979, and the energy consumption by industry and other branches in 1979. (A.G.P.)

  3. Energy statistics. France. August 2001

    International Nuclear Information System (INIS)

    2001-08-01

    This document summarizes in a series of tables the statistical data relative to the production, consumption, supplies, resources, and prices of energies in France: 1 - all energies (coal, oil, gas, electric power, renewable energies): supplies, uses per sector, national production and consumption of primary energies, final consumption, general indicators (energy bill, US$ change rate, prices index, prices of imported crude oil, energy independence, internal gross product, evolution between 1973 and 2000, and projections for 2020). 2 - detailed data per energy source (petroleum, natural gas, electric power, solid mineral fuels): resources, uses, and prices. An indicative comparison is made with the other countries of the European Union. (J.S.)

  4. Energy statistics: Fourth quarter, 1989

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    This volume contains 100 tables compiling data into the following broad categories: energy, drilling, natural gas, gas liquids, oil, coal, peat, electricity, uranium, and business indicators. The types of data that are given include production and consumption statistics, reserves, imports and exports, prices, fossil fuel and nuclear power generation statistics, and price indices

  5. Energy Statistics Manual; Manual de Estadisticas Energeticas

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    Detailed, complete, timely and reliable statistics are essential to monitor the energy situation at a country level as well as at an international level. Energy statistics on supply, trade, stocks, transformation and demand are indeed the basis for any sound energy policy decision. For instance, the market of oil -- which is the largest traded commodity worldwide -- needs to be closely monitored in order for all market players to know at any time what is produced, traded, stocked and consumed and by whom. In view of the role and importance of energy in world development, one would expect that basic energy information to be readily available and reliable. This is not always the case and one can even observe a decline in the quality, coverage and timeliness of energy statistics over the last few years.

  6. Energy Statistics Manual; Enerji Istatistikleri El Kitabi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    Detailed, complete, timely and reliable statistics are essential to monitor the energy situation at a country level as well as at an international level. Energy statistics on supply, trade, stocks, transformation and demand are indeed the basis for any sound energy policy decision. For instance, the market of oil -- which is the largest traded commodity worldwide -- needs to be closely monitored in order for all market players to know at any time what is produced, traded, stocked and consumed and by whom. In view of the role and importance of energy in world development, one would expect that basic energy information to be readily available and reliable. This is not always the case and one can even observe a decline in the quality, coverage and timeliness of energy statistics over the last few years.

  7. Key World Energy Statistics 2013

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-01

    The IEA produced its first handy, pocket-sized summary of key energy data in 1997 and every year since then it has been more and more successful. Key World Energy Statistics contains timely, clearly-presented data on supply, transformation and consumption of all major energy sources. The interested businessman, journalist or student will have at his or her fingertips the annual Canadian production of coal, the electricity consumption in Thailand, the price of diesel oil in Spain and thousands of other useful energy facts.

  8. World offshore energy loss statistics

    International Nuclear Information System (INIS)

    Kaiser, Mark J.

    2007-01-01

    Offshore operations present a unique set of environmental conditions and adverse exposure not observed in a land environment taking place in a confined space in a hostile environment under the constant danger of catastrophe and loss. It is possible to engineer some risks to a very low threshold of probability, but losses and unforeseen events can never be entirely eliminated because of cost considerations, the human factor, and environmental uncertainty. Risk events occur infrequently but have the potential of generating large losses, as evident by the 2005 hurricane season in the Gulf of Mexico, which was the most destructive and costliest natural disaster in the history of offshore production. The purpose of this paper is to provide a statistical assessment of energy losses in offshore basins using the Willis Energy Loss database. A description of the loss categories and causes of property damage are provided, followed by a statistical assessment of damage and loss broken out by region, cause, and loss category for the time horizon 1970-2004. The impact of the 2004-2005 hurricane season in the Gulf of Mexico is summarized

  9. GOE-TYPE ENERGY-LEVEL STATISTICS AND REGULAR CLASSICAL DYNAMICS FOR ROTATIONAL NUCLEI IN THE INTERACTING BOSON MODEL

    NARCIS (Netherlands)

    PAAR, [No Value; VORKAPIC, D; DIERPERINK, AEL

    1992-01-01

    We study the fluctuation properties of 0+ levels in rotational nuclei using the framework of SU(3) dynamical symmetry of the interacting boson model. Computations of Poincare sections for SU(3) dynamical symmetry and its breaking confirm the expected relation between dynamical symmetry and classical

  10. Key world energy statistics. 2004 edition

    International Nuclear Information System (INIS)

    2004-01-01

    Key World Energy Statistics from the IEA contains timely, clearly-presented data on the supply, transformation and consumption of all major energy sources. The IEA energy balances and statistics databases on CD-Rom provide annual historical energy data extracted from four IEA/OECD data bases: energy statistics and energy balances, which contain data for most of the OECD countries for the years 1960 to 2002 and energy statistics and balances for more than 100 non-OECD countries for the years 1971 to 2002. The CDs and/or hard-copies and PDFs can be purchased individually: Energy Balances of OECD Countries 2004; Energy Statistics of OECD Countries 2004; Energy Balances of Non OECD Countries 2004; Energy Statistics of Non-OECD Countries 2004

  11. Electrical energy statistics for France

    International Nuclear Information System (INIS)

    2009-07-01

    ). Sales of energy between actors of the power system made of sales of the Balance Responsible Entities, sales of generation capacity auctions and sales on Powernext Day-Ahead Market reached 385.1 TWh, an increase of 1.0 % compared with 2007 (381.4 TWh). The statistics concerning the quality of supply are marked in 2008 by an increase of the long outages mainly due to the incident happened in Provence-Alpes-Cote d'Azur after a violent storm on November 3, 2008. Contents: 1 - Electrical energy balances: Monthly balance of the electrical energy flows on the RTE network and in France 2 - Capacity and energy: Daily capacity curves, National consumption and temperature, Daily high and low energy and capacity figures for 2008; 3 - Networks: Lines and cables in operation, Substations, Transformers owned by RTE, Cross-border lines at HVB voltage excluding Corsica; 4 - Physical exchanges: Trend in the balance of physical exchanges - France, Monotone of export balance - France excluding Corsica, Monthly monitoring of physical exchanges on the borders of the RTE network; 5 - Market mechanism: Contractual electricity exchanges with foreign countries, Daily market coupling between Netherlands (NL), Belgium (BE) and France (FR), Balance Responsible Entities (BR), Use of the VPP, Energy sales on Powernext, Balancing mechanism; 6 - Consumption of electricity: Trend of national consumption of electricity in France, Annual breakdown of end customers connected to the RTE network, Consumption of Large-scale industry and SME/SMIs: annual breakdown per activity, Monotone of capacity values called by national consumption in 2008; 7 - Generation of electricity: Developments in generating facilities in France, Injections on the RTE network by connection voltage, Injections on the RTE network by installation type; 8 - Technical performance of RTE: Quality of supply, Safety of the electric system; 9 - Regional data: Administrative limits, Description of the RTE network and technical performance

  12. Energy statistics France; Statistiques energetiques France

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-04-01

    This document presents statistical data on energy accounting in France compared to other european countries. Many tables and charts on energy consumption, energy invoice and prices are provided by sectors. (A.L.B.)

  13. Statistical thermodynamics and energy exchanges

    International Nuclear Information System (INIS)

    Oudet, X.

    1987-01-01

    The probability of finding the energy of a particle in the vicinity of a given energy is determined, taking into account of the conservation of energy during the exchanges of energy. As a result the exchanges which determine the different probabilities also introduce a dependence between them, allowing a full calculation. The solution has the main properties of the distribution of Fermi-Dirac, with the mean energy per particle as variable in place of temperature. It allows to propose a localized model for the conduction electrons [fr

  14. Statistics for High Energy Physics

    CERN Multimedia

    CERN. Geneva

    2018-01-01

    The lectures emphasize the frequentist approach used for Dark Matter search and the Higgs search, discovery and measurements of its properties. An emphasis is put on hypothesis test using the asymptotic formulae formalism and its derivation, and on the derivation of the trial factor formulae in one and two dimensions. Various test statistics and their applications are discussed.  Some keywords: Profile Likelihood, Neyman Pearson, Feldman Cousins, Coverage, CLs. Nuisance Parameters Impact, Look Elsewhere Effect... Selected Bibliography: G. J. Feldman and R. D. Cousins, A Unified approach to the classical statistical analysis of small signals, Phys.\\ Rev.\\ D {\\bf 57}, 3873 (1998). A. L. Read, Presentation of search results: The CL(s) technique,'' J.\\ Phys.\\ G {\\bf 28}, 2693 (2002). G. Cowan, K. Cranmer, E. Gross and O. Vitells,  Asymptotic formulae for likelihood-based tests of new physics,' Eur.\\ Phys.\\ J.\\ C {\\bf 71}, 1554 (2011) Erratum: [Eur.\\ Phys.\\ J.\\ C {\\bf 73}...

  15. Quasiparticle features and level statistics of odd-odd nucleus

    International Nuclear Information System (INIS)

    Cheng Nanpu; Zheng Renrong; Zhu Shunquan

    2001-01-01

    The energy levels of the odd-odd nucleus 84 Y are calculated by using the axially symmetric rotor plus quasiparticles model. The two standard statistical tests of Random-Matrix Theory such as the distribution function p(s) of the nearest-neighbor level spacings (NNS) and the spectral rigidity Δ 3 are used to explore the statistical properties of the energy levels. By analyzing the properties of p(s) and Δ 3 under various conditions, the authors find that the quasiparticle features mainly affect the statistical properties of the odd-odd nucleus 84 Y through the recoil term and the Coriolis force in this theoretical mode, and that the chaotic degree of the energy levels decreases with the decreasing of the Fermi energy and the energy-gap parameters. The effect of the recoil term is small while the Coriolis force plays a major role in the spectral structure of 84 Y

  16. Shnirelman peak in the level spacing statistics

    International Nuclear Information System (INIS)

    Chirikov, B.V.; Shepelyanskij, D.L.

    1994-01-01

    The first results on the statistical properties of the quantum quasidegeneracy are presented. A physical interpretation of the Shnirelman theorem predicted the bulk quasidegeneracy is given. The conditions for the strong impact of the degeneracy on the quantum level statistics are formulated which allows to extend the application of the Shnirelman theorem into a broad class of quantum systems. 14 refs., 3 figs

  17. Wind energy statistics 2012; Vindkraftsstatistik 2012

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-04-15

    The publication 'Wind Energy Statistics' is an annual publication. Since 2010, the reported statistics of installed power, number of plants and regional distribution, even semi-annually, and in tabular form on the Agency's website. The publication is produced in a new way this year, which will result in some data differ from previous publications. Due to the certificate system there is basically full statistics on wind energy in this publication which are presented in different styles. Here we present the regional distribution, ie. how the number of turbines and installed capacity is allocated to counties and municipalities. The electricity produced divided by county, where for reasons of confidentiality possible, are also reported. The wind power is becoming increasingly important in the Swedish energy system which provides an increased demand for statistics and other divisions than that presented in the official statistics. Therefore, this publication, which are not official statistics, has been developed.

  18. Quantum level statistics of pseudointegrable billiards

    International Nuclear Information System (INIS)

    Cheon, T.; Cohen, T.D.

    1989-01-01

    We study the spectral statistics of systems of two-dimensional pseudointegrable billiards. These systems are classically nonergodic, but nonseparable. It is found that such systems possess quantum spectra which are closely simulated by the Gaussian orthogonal ensemble. We discuss the implications of these results on the conjectured relation between classical chaos and quantum level statistics. We emphasize the importance of the semiclassical nature of any such relation

  19. Energy statistics. France; Statistiques energetiques. France

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    This document summarizes in a series of tables the energy statistical data for France: consumption since 1973; energy supplies (production, imports, exports, stocks) and uses (refining, power production, internal uses, sectoral consumption) for coal, petroleum, gas, electricity, and renewable energy sources; national production and consumption of primary energy; final consumption per sector and per energy source; general indicators (energy bill, US$ change rate, prices, energy independence, internal gross product); projections. Details (resources, uses, prices, imports, internal consumption) are given separately for petroleum, natural gas, electric power and solid mineral fuels. (J.S.)

  20. Foundation of statistical energy analysis in vibroacoustics

    CERN Document Server

    Le Bot, A

    2015-01-01

    This title deals with the statistical theory of sound and vibration. The foundation of statistical energy analysis is presented in great detail. In the modal approach, an introduction to random vibration with application to complex systems having a large number of modes is provided. For the wave approach, the phenomena of propagation, group speed, and energy transport are extensively discussed. Particular emphasis is given to the emergence of diffuse field, the central concept of the theory.

  1. Statistics of high-level scene context.

    Science.gov (United States)

    Greene, Michelle R

    2013-01-01

    CONTEXT IS CRITICAL FOR RECOGNIZING ENVIRONMENTS AND FOR SEARCHING FOR OBJECTS WITHIN THEM: contextual associations have been shown to modulate reaction time and object recognition accuracy, as well as influence the distribution of eye movements and patterns of brain activations. However, we have not yet systematically quantified the relationships between objects and their scene environments. Here I seek to fill this gap by providing descriptive statistics of object-scene relationships. A total of 48, 167 objects were hand-labeled in 3499 scenes using the LabelMe tool (Russell et al., 2008). From these data, I computed a variety of descriptive statistics at three different levels of analysis: the ensemble statistics that describe the density and spatial distribution of unnamed "things" in the scene; the bag of words level where scenes are described by the list of objects contained within them; and the structural level where the spatial distribution and relationships between the objects are measured. The utility of each level of description for scene categorization was assessed through the use of linear classifiers, and the plausibility of each level for modeling human scene categorization is discussed. Of the three levels, ensemble statistics were found to be the most informative (per feature), and also best explained human patterns of categorization errors. Although a bag of words classifier had similar performance to human observers, it had a markedly different pattern of errors. However, certain objects are more useful than others, and ceiling classification performance could be achieved using only the 64 most informative objects. As object location tends not to vary as a function of category, structural information provided little additional information. Additionally, these data provide valuable information on natural scene redundancy that can be exploited for machine vision, and can help the visual cognition community to design experiments guided by statistics

  2. Energy statistics: A manual for developing countries

    International Nuclear Information System (INIS)

    1991-01-01

    Considerable advances have been made by developing countries during the last 20 years in the collection and compilation of energy statistics. the present Manual is a guide, which it is hoped will be used in countries whose system of statistics is less advanced to identify the main areas that should be developed and how this might be achieved. The generally accepted aim is for countries to be able to compile statistics annually on the main characteristics shown for each fuel, and for energy in total. These characteristics are mainly concerned with production, supply and consumption, but others relating to the size and capabilities of the different energy industries may also be of considerable importance. The initial task of collecting data from the energy industries (mines, oil producers, refineries and distributors, electrical power stations, etc.) may well fall to a number of organizations. ''Energy'' from a statistical point of view is the sum of the component fuels, and good energy statistics are therefore dependent on good fuel statistics. For this reason a considerable part of this Manual is devoted to the production of regular, comprehensive and reliable statistics relating to individual fuels. Chapters V to IX of this Manual are concerned with identifying the flows of energy, from production to final consumption, for each individual fuel, and how data on these flows might be expected to be obtained. The very different problems concerned with the collection of data on the flows for biomass fuels are covered in chapter X. The data needed to complete the picture of the national scene for each individual fuel, more concerned with describing the size, capabilities and efficiency of the industries related to that fuel, are discussed in chapter XI. Annex I sets out the relationships between the classifications of the various types of fuels. The compilation of energy balances from the data obtained for individual fuels is covered in chapter XIII. Finally, chapter

  3. Parametric Level Statistics in Random Matrix Theory: Exact Solution

    International Nuclear Information System (INIS)

    Kanzieper, E.

    1999-01-01

    During recent several years, the theory of non-Gaussian random matrix ensembles has experienced a sound progress motivated by new ideas in quantum chromodynamics (QCD) and mesoscopic physics. Invariant non-Gaussian random matrix models appear to describe universal features of low-energy part of the spectrum of Dirac operator in QCD, and electron level statistics in normal conducting-superconducting hybrid structures. They also serve as a basis for constructing the toy models of universal spectral statistics expected at the edge of the metal-insulator transition. While conventional spectral statistics has received a detailed study in the context of RMT, quite a bit is known about parametric level statistics in non-Gaussian random matrix models. In this communication we report about exact solution to the problem of parametric level statistics in unitary invariant, U(N), non-Gaussian ensembles of N x N Hermitian random matrices with either soft or strong level confinement. The solution is formulated within the framework of the orthogonal polynomial technique and is shown to depend on both the unfolded two-point scalar kernel and the level confinement through a double integral transformation which, in turn, provides a constructive tool for description of parametric level correlations in non-Gaussian RMT. In the case of soft level confinement, the formalism developed is potentially applicable to a study of parametric level statistics in an important class of random matrix models with finite level compressibility expected to describe a disorder-induced metal-insulator transition. In random matrix ensembles with strong level confinement, the solution presented takes a particular simple form in the thermodynamic limit: In this case, a new intriguing connection relation between the parametric level statistics and the scalar two-point kernel of an unperturbed ensemble is demonstrated to emerge. Extension of the results obtained to higher-order parametric level statistics is

  4. Wind energy statistics 2011; Vindkraftsstatistik 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-01

    Wind energy statistics 2011 is the fifth publication in the annual series. The report's focus is on regional distribution, i e the number of plants and installed capacity allocated to counties and municipalities. The publication also reports a division between sea- and land-based plants and the size of wind farms in Sweden in terms of installed capacity. The publication is published in spring in report form and since 2010 statistics on number of plants, installed capacity, and regional distribution semi-annually are also presented on the Swedish Energy Agency's website. The statistics relating to installed capacity, number of wind farms and location in this publication is taken from the electricity certificate system, introduced in May 2003. Thanks to the electricity certificate system there is in principle comprehensive statistics of wind energy which in this publication is presented in different intersections. Statistics related to electricity production is taken from the Swedish Kraftnaets [Swedish national grid's] registry Cesar.

  5. Aftershock Energy Distribution by Statistical Mechanics Approach

    Science.gov (United States)

    Daminelli, R.; Marcellini, A.

    2015-12-01

    The aim of our work is to research the most probable distribution of the energy of aftershocks. We started by applying one of the fundamental principles of statistical mechanics that, in case of aftershock sequences, it could be expressed as: the greater the number of different ways in which the energy of aftershocks can be arranged among the energy cells in phase space the more probable the distribution. We assume that each cell in phase space has the same possibility to be occupied, and that more than one cell in the phase space can have the same energy. Seeing that seismic energy is proportional to products of different parameters, a number of different combinations of parameters can produce different energies (e.g., different combination of stress drop and fault area can release the same seismic energy). Let us assume that there are gi cells in the aftershock phase space characterised by the same energy released ɛi. Therefore we can assume that the Maxwell-Boltzmann statistics can be applied to aftershock sequences with the proviso that the judgment on the validity of this hypothesis is the agreement with the data. The aftershock energy distribution can therefore be written as follow: n(ɛ)=Ag(ɛ)exp(-βɛ)where n(ɛ) is the number of aftershocks with energy, ɛ, A and β are constants. Considering the above hypothesis, we can assume g(ɛ) is proportional to ɛ. We selected and analysed different aftershock sequences (data extracted from Earthquake Catalogs of SCEC, of INGV-CNT and other institutions) with a minimum magnitude retained ML=2 (in some cases ML=2.6) and a time window of 35 days. The results of our model are in agreement with the data, except in the very low energy band, where our model resulted in a moderate overestimation.

  6. Methodological differences behind energy statistics for steel production – Implications when monitoring energy efficiency

    International Nuclear Information System (INIS)

    Morfeldt, Johannes; Silveira, Semida

    2014-01-01

    Energy efficiency indicators used for evaluating industrial activities at the national level are often based on statistics reported in international databases. In the case of the Swedish iron and steel sector, energy consumption statistics published by Odyssee, Eurostat, the IEA (International Energy Agency), and the United Nations differ, resulting in diverging energy efficiency indicators. For certain years, the specific energy consumption for steel is twice as high if based on Odyssee statistics instead of statistics from the IEA. The analysis revealed that the assumptions behind the allocation of coal and coke used in blast furnaces as energy consumption or energy transformation are the major cause for these differences. Furthermore, the differences are also related to errors in the statistical data resulting from two different surveys that support the data. The allocation of coal and coke has implications when promoting resource as well as energy efficiency at the systems level. Eurostat's definition of energy consumption is more robust compared to the definitions proposed by other organisations. Nevertheless, additional data and improved energy efficiency indicators are needed to fully monitor the iron and steel sector's energy system and promote improvements towards a greener economy at large. - Highlights: • Energy statistics for the iron and steel sector diverge in international databases. • Varying methods have implications when monitoring energy and resource efficiency. • Allocation of blast furnaces as transformation activities is behind the differences. • Different statistical surveys and human error also contribute to diverging results

  7. Watt-Lite; Energy Statistics Made Tangible

    DEFF Research Database (Denmark)

    Jönsson, Li; Broms, Loove; Katzeff, Cecilia

    2011-01-01

    of consumers its consequences are poorly understood. In order to better understand how we can use design to increase awareness of electricity consumption in everyday life, we will discuss the design of Watt-Lite, a set of three oversized torches projecting real time energy statistics of a factory...... in the physical environments of its employees. The design of Watt-Lite is meant to explore ways of representing, understanding and interacting with electricity in industrial workspaces. We discuss three design inquiries and their implications for the design of Watt-Lite: the use of tangible statistics...

  8. Statistical learning in high energy and astrophysics

    Energy Technology Data Exchange (ETDEWEB)

    Zimmermann, J.

    2005-06-16

    This thesis studies the performance of statistical learning methods in high energy and astrophysics where they have become a standard tool in physics analysis. They are used to perform complex classification or regression by intelligent pattern recognition. This kind of artificial intelligence is achieved by the principle ''learning from examples'': The examples describe the relationship between detector events and their classification. The application of statistical learning methods is either motivated by the lack of knowledge about this relationship or by tight time restrictions. In the first case learning from examples is the only possibility since no theory is available which would allow to build an algorithm in the classical way. In the second case a classical algorithm exists but is too slow to cope with the time restrictions. It is therefore replaced by a pattern recognition machine which implements a fast statistical learning method. But even in applications where some kind of classical algorithm had done a good job, statistical learning methods convinced by their remarkable performance. This thesis gives an introduction to statistical learning methods and how they are applied correctly in physics analysis. Their flexibility and high performance will be discussed by showing intriguing results from high energy and astrophysics. These include the development of highly efficient triggers, powerful purification of event samples and exact reconstruction of hidden event parameters. The presented studies also show typical problems in the application of statistical learning methods. They should be only second choice in all cases where an algorithm based on prior knowledge exists. Some examples in physics analyses are found where these methods are not used in the right way leading either to wrong predictions or bad performance. Physicists also often hesitate to profit from these methods because they fear that statistical learning methods cannot

  9. Statistical learning in high energy and astrophysics

    International Nuclear Information System (INIS)

    Zimmermann, J.

    2005-01-01

    This thesis studies the performance of statistical learning methods in high energy and astrophysics where they have become a standard tool in physics analysis. They are used to perform complex classification or regression by intelligent pattern recognition. This kind of artificial intelligence is achieved by the principle ''learning from examples'': The examples describe the relationship between detector events and their classification. The application of statistical learning methods is either motivated by the lack of knowledge about this relationship or by tight time restrictions. In the first case learning from examples is the only possibility since no theory is available which would allow to build an algorithm in the classical way. In the second case a classical algorithm exists but is too slow to cope with the time restrictions. It is therefore replaced by a pattern recognition machine which implements a fast statistical learning method. But even in applications where some kind of classical algorithm had done a good job, statistical learning methods convinced by their remarkable performance. This thesis gives an introduction to statistical learning methods and how they are applied correctly in physics analysis. Their flexibility and high performance will be discussed by showing intriguing results from high energy and astrophysics. These include the development of highly efficient triggers, powerful purification of event samples and exact reconstruction of hidden event parameters. The presented studies also show typical problems in the application of statistical learning methods. They should be only second choice in all cases where an algorithm based on prior knowledge exists. Some examples in physics analyses are found where these methods are not used in the right way leading either to wrong predictions or bad performance. Physicists also often hesitate to profit from these methods because they fear that statistical learning methods cannot be controlled in a

  10. Characteristics of level-spacing statistics in chaotic graphene billiards.

    Science.gov (United States)

    Huang, Liang; Lai, Ying-Cheng; Grebogi, Celso

    2011-03-01

    A fundamental result in nonrelativistic quantum nonlinear dynamics is that the spectral statistics of quantum systems that possess no geometric symmetry, but whose classical dynamics are chaotic, are described by those of the Gaussian orthogonal ensemble (GOE) or the Gaussian unitary ensemble (GUE), in the presence or absence of time-reversal symmetry, respectively. For massless spin-half particles such as neutrinos in relativistic quantum mechanics in a chaotic billiard, the seminal work of Berry and Mondragon established the GUE nature of the level-spacing statistics, due to the combination of the chirality of Dirac particles and the confinement, which breaks the time-reversal symmetry. A question is whether the GOE or the GUE statistics can be observed in experimentally accessible, relativistic quantum systems. We demonstrate, using graphene confinements in which the quasiparticle motions are governed by the Dirac equation in the low-energy regime, that the level-spacing statistics are persistently those of GOE random matrices. We present extensive numerical evidence obtained from the tight-binding approach and a physical explanation for the GOE statistics. We also find that the presence of a weak magnetic field switches the statistics to those of GUE. For a strong magnetic field, Landau levels become influential, causing the level-spacing distribution to deviate markedly from the random-matrix predictions. Issues addressed also include the effects of a number of realistic factors on level-spacing statistics such as next nearest-neighbor interactions, different lattice orientations, enhanced hopping energy for atoms on the boundary, and staggered potential due to graphene-substrate interactions.

  11. Level and width statistics for a decaying chaotic system

    International Nuclear Information System (INIS)

    Mizutori, S.; Zelevinsky, V.G.

    1993-01-01

    The random matrix ensemble of discretized effective non-hermitian hamiltonians is used for studying local correlations and fluctuations of energies and widths in a quantum system where intrinsic levels are coupled to the continuum via a common decay channel. With the use of analytical estimates and numerical simulations, generic properties of statistical observables are obtained for the regimes of weak and strong continuum coupling as well as for the transitional region. Typical signals of the transition (width collectivization, disappearance of level repulsion at small spacings and violation of uniformity along the energy axis) are discussed quantitatively. (orig.)

  12. Nonextensive statistical mechanics and high energy physics

    Directory of Open Access Journals (Sweden)

    Tsallis Constantino

    2014-04-01

    Full Text Available The use of the celebrated Boltzmann-Gibbs entropy and statistical mechanics is justified for ergodic-like systems. In contrast, complex systems typically require more powerful theories. We will provide a brief introduction to nonadditive entropies (characterized by indices like q, which, in the q → 1 limit, recovers the standard Boltzmann-Gibbs entropy and associated nonextensive statistical mechanics. We then present somerecent applications to systems such as high-energy collisions, black holes and others. In addition to that, we clarify and illustrate the neat distinction that exists between Lévy distributions and q-exponential ones, a point which occasionally causes some confusion in the literature, very particularly in the LHC literature

  13. Watt-Lite; Energy Statistics Made Tangible

    DEFF Research Database (Denmark)

    Jönsson, Li; Broms, Loove; Katzeff, Cecilia

    2011-01-01

    Increasing our knowledge of how design affects behaviour in the workplace has a large potential for reducing electricity consumption. This would be beneficial for the environment as well as for industry and society at large. In Western society energy use is hidden and for the great mass...... in the physical environments of its employees. The design of Watt-Lite is meant to explore ways of representing, understanding and interacting with electricity in industrial workspaces. We discuss three design inquiries and their implications for the design of Watt-Lite: the use of tangible statistics...

  14. Energy Statistics Manual; Manuel sur les statistiques de l'energie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    Detailed, complete, timely and reliable statistics are essential to monitor the energy situation at a country level as well as at an international level. Energy statistics on supply, trade, stocks, transformation and demand are indeed the basis for any sound energy policy decision. For instance, the market of oil -- which is the largest traded commodity worldwide -- needs to be closely monitored in order for all market players to know at any time what is produced, traded, stocked and consumed and by whom. In view of the role and importance of energy in world development, one would expect that basic energy information to be readily available and reliable. This is not always the case and one can even observe a decline in the quality, coverage and timeliness of energy statistics over the last few years.

  15. Recent advances in statistical energy analysis

    Science.gov (United States)

    Heron, K. H.

    1992-01-01

    Statistical Energy Analysis (SEA) has traditionally been developed using modal summation and averaging approach, and has led to the need for many restrictive SEA assumptions. The assumption of 'weak coupling' is particularly unacceptable when attempts are made to apply SEA to structural coupling. It is now believed that this assumption is more a function of the modal formulation rather than a necessary formulation of SEA. The present analysis ignores this restriction and describes a wave approach to the calculation of plate-plate coupling loss factors. Predictions based on this method are compared with results obtained from experiments using point excitation on one side of an irregular six-sided box structure. Conclusions show that the use and calculation of infinite transmission coefficients is the way forward for the development of a purely predictive SEA code.

  16. Energy statistics of pre-revolutionary Russia

    Directory of Open Access Journals (Sweden)

    N. S. Simonov

    2017-01-01

    Full Text Available The article is devoted to the problem of creation and development of the energy statistics of the Russian Empire of the initial stage of electrification and the formation of the energy economy, which is related to: 1 the economic upsurge of the 1890s; 2 the new economic recovery of 1907–1913 and 3 the militarization of industry in 1914–1916. The real technical and economic indicators and complex statistical data of the pre-revolutionary electric power industry were either hushed up or deliberately distorted during the Soviet era. Even in the encyclopaedic literature it was considered that pre-revolutionaryRussia“was on one of the last places in the world” for the production of electricity. The author analyzes statistical surveys (censuses of the manufacturing industry for 1900 and 1908 (the “varzar censuses”, which gave the first material on the state of its energy sector, namely: the composition, quantity and power of primary engines and electric motors. For the first time in historiography, the data of the “energy censuses” of the Ministry of Finance for 1905 and 1913 on the number and capacity of central public power stations and private power stations (block stations of industrial enterprises, organizations and institutions are cited. The data of the census were conducted with the participation of the apparatus of factory and factory inspections in 1906 and in1916 inall provinces of the Russian Empire, with the exception of six provinces of the frontline zone. A lot of work was done to record electricity production / consumption, which was conducted by the Russian electrotechnical community. According to incomplete data published in 1917 by the Secretariat of the Standing Committee of the VII All-Russia Electrotechnical Congress, from 1905 to 1913 (that is, for 8 years the total number of power stations in the Russian Empire increased by 1.7 times, and the amount of electricity produced by them Has grown in 3,8 times. The

  17. Electrical Energy Statistics for France - 2010

    International Nuclear Information System (INIS)

    2011-06-01

    consumption has risen by 14%. During 2010, a total of 20 new substations for various voltage levels were connected to the transmission network. Work carried out on the RTE network allowed underground circuits to be lengthened by 119 km, and the total length of overhead power lines to be cut by 64 km. RTE also reclaimed 3,825 km of circuits, mostly overhead, which previously belonged to SNCF, as well as 120 substations. On the distribution networks, extension was of the order of 8,000 km in 2010. Contractual exchanges with other countries are down by 7.2%, reaching a cumulative total value for exports and imports of 103.7 TWh (compared with 111.7 TWh in 2009). The sharp decrease in imports of 6.4 TWh (14.7%) and the decrease in exports of 1.6 TWh (2.5%) caused the balance of exchanges to rise by 4.8 TWh. The total figure comprising sales by Balance Responsible Entities via Block Exchange Notifications, sales of generation capacity at auctions, and energy sales on the EPEX SPOT market, reached 407.6 TWh, an increase of 4.6% compared with 2009 (389.6 TWh). Statistics on quality of electricity were characterized mainly in 2010 by some of the best ever results for short and long outage frequencies. In terms of the reliability of the power system, the number of significant events identified in 2010 was down by more than 10% compared with 2009. 2010 was however distinguished by two exceptional events: the Xynthia storm in February in west France, and the floods in June in the Var

  18. Noise level and MPEG-2 encoder statistics

    Science.gov (United States)

    Lee, Jungwoo

    1997-01-01

    Most software in the movie and broadcasting industries are still in analog film or tape format, which typically contains random noise that originated from film, CCD camera, and tape recording. The performance of the MPEG-2 encoder may be significantly degraded by the noise. It is also affected by the scene type that includes spatial and temporal activity. The statistical property of noise originating from camera and tape player is analyzed and the models for the two types of noise are developed. The relationship between the noise, the scene type, and encoder statistics of a number of MPEG-2 parameters such as motion vector magnitude, prediction error, and quant scale are discussed. This analysis is intended to be a tool for designing robust MPEG encoding algorithms such as preprocessing and rate control.

  19. Electrical Energy Statistics for France 2002

    International Nuclear Information System (INIS)

    2003-11-01

    Detailed statistics on electricity flows in France and on facilities. Regional data / Consumption per sector of activity / Records over last 10 years (definitive results). In 2002, national electrical consumption reached 449.9 TWh, an increase of 0.3% compared with 2001 (448.6 TWh). Adjusted for winter and summer climate contingencies, its growth rate was 0.9% compared with 2001. Consumption by customers connected at high or medium voltage levels came to 254.2 TWh, an increase of 0.8% compared with 2001 (252.3 TWh); consumption by customers connected at low voltage levels came to 165 TWh, a decrease of 0.8% compared with 2001 (166.4 TWh). Generation in France reached 534.3 TWh, an increase of 11.5 TWh or 2.2% compared with 2001 (522.8 TWh). This increase broke down between nuclear generation and conventional thermal generation. Net nuclear generation injected, as measured by RTE, came to 415.5 TWh in 2002, an increase of 4.0% compared with 2001 (399.6 TWh). Conventional thermal generation came to 51.1 TWh, an increase of 15.4 % compared with 2001 (44.3 TWh). Hydro-electric generation amounted to 65.5 TWh, a fall of 15.3% compared with 2001 (77.3 TWh). In terms of physical exchanges with foreign countries, France exported a net total of 77 TWh, an increase of 12.6% compared with 2001 (68.4 TWh). Contractual exchanges with foreign countries, recorded by RTE, fell by 9.9 % to reach a cumulative value for exports and imports of 107.8 TWh (compared with 120 TWh in 2001)

  20. Energy levels of 56Mn

    DEFF Research Database (Denmark)

    Van Assche, P. H. M.; Baader, H. A.; Koch, H. R.

    1971-01-01

    The low-energy spectrum of the 55Mn(n,γ)56 Mn reaction has been studied with a γ-diffraction spectrometer. These data allowed the construction of a level scheme for 56Mn with two previously unobserved doublets. High-energy γ-transitions to the low-energy states have been measured for different...

  1. Accuracy and reliability of China's energy statistics

    Energy Technology Data Exchange (ETDEWEB)

    Sinton, Jonathan E.

    2001-09-14

    Many observers have raised doubts about the accuracy and reliability of China's energy statistics, which show an unprecedented decline in recent years, while reported economic growth has remained strong. This paper explores the internal consistency of China's energy statistics from 1990 to 2000, coverage and reporting issues, and the state of the statistical reporting system. Available information suggests that, while energy statistics were probably relatively good in the early 1990s, their quality has declined since the mid-1990s. China's energy statistics should be treated as a starting point for analysis, and explicit judgments regarding ranges of uncertainty should accompany any conclusions.

  2. The semi-empirical low-level background statistics

    International Nuclear Information System (INIS)

    Tran Manh Toan; Nguyen Trieu Tu

    1992-01-01

    A semi-empirical low-level background statistics was proposed. The one can be applied to evaluated the sensitivity of low background systems, and to analyse the statistical error, the 'Rejection' and 'Accordance' criteria for processing of low-level experimental data. (author). 5 refs, 1 figs

  3. A Statistical Model for Energy Intensity

    Directory of Open Access Journals (Sweden)

    Marjaneh Issapour

    2012-12-01

    Full Text Available A promising approach to improve scientific literacy in regards to global warming and climate change is using a simulation as part of a science education course. The simulation needs to employ scientific analysis of actual data from internationally accepted and reputable databases to demonstrate the reality of the current climate change situation. One of the most important criteria for using a simulation in a science education course is the fidelity of the model. The realism of the events and consequences modeled in the simulation is significant as well. Therefore, all underlying equations and algorithms used in the simulation must have real-world scientific basis. The "Energy Choices" simulation is one such simulation. The focus of this paper is the development of a mathematical model for "Energy Intensity" as a part of the overall system dynamics in "Energy Choices" simulation. This model will define the "Energy Intensity" as a function of other independent variables that can be manipulated by users of the simulation. The relationship discovered by this research will be applied to an algorithm in the "Energy Choices" simulation.

  4. Statistical learning methods in high-energy and astrophysics analysis

    Energy Technology Data Exchange (ETDEWEB)

    Zimmermann, J. [Forschungszentrum Juelich GmbH, Zentrallabor fuer Elektronik, 52425 Juelich (Germany) and Max-Planck-Institut fuer Physik, Foehringer Ring 6, 80805 Munich (Germany)]. E-mail: zimmerm@mppmu.mpg.de; Kiesling, C. [Max-Planck-Institut fuer Physik, Foehringer Ring 6, 80805 Munich (Germany)

    2004-11-21

    We discuss several popular statistical learning methods used in high-energy- and astro-physics analysis. After a short motivation for statistical learning we present the most popular algorithms and discuss several examples from current research in particle- and astro-physics. The statistical learning methods are compared with each other and with standard methods for the respective application.

  5. Statistical learning methods in high-energy and astrophysics analysis

    International Nuclear Information System (INIS)

    Zimmermann, J.; Kiesling, C.

    2004-01-01

    We discuss several popular statistical learning methods used in high-energy- and astro-physics analysis. After a short motivation for statistical learning we present the most popular algorithms and discuss several examples from current research in particle- and astro-physics. The statistical learning methods are compared with each other and with standard methods for the respective application

  6. Technology for enhancing statistical reasoning at the school level

    NARCIS (Netherlands)

    Biehler, R.; Ben-Zvi, D.; Bakker, A.|info:eu-repo/dai/nl/272605778; Makar, K.

    2013-01-01

    The purpose of this chapter is to provide an updated overview of digital technologies relevant to statistics education, and to summarize what is currently known about how these new technologies can support the development of students’ statistical reasoning at the school level. A brief literature

  7. Energy statistics and the role of nuclear energy in Taiwan

    International Nuclear Information System (INIS)

    Tseng, T.T.; Chen, Y.B.

    1995-01-01

    Due to the very limited indigenous energy resources, Taiwan has to import over 95% of the energy from overseas to meet her need. In this paper, the supply and demand of various kind of major energies will be discussed. Also, in order to lessen the environmental burden and increase the energy independence for Taiwan, the so-called quasi-indigenous energy - nuclear energy, will play an important role in Taiwan's future energy mix. The optimal ratios of the mix in the year of 2005 in Taiwan area using multiobjective method by independent research Institute will also be discussed. (author)

  8. Significance levels for studies with correlated test statistics.

    Science.gov (United States)

    Shi, Jianxin; Levinson, Douglas F; Whittemore, Alice S

    2008-07-01

    When testing large numbers of null hypotheses, one needs to assess the evidence against the global null hypothesis that none of the hypotheses is false. Such evidence typically is based on the test statistic of the largest magnitude, whose statistical significance is evaluated by permuting the sample units to simulate its null distribution. Efron (2007) has noted that correlation among the test statistics can induce substantial interstudy variation in the shapes of their histograms, which may cause misleading tail counts. Here, we show that permutation-based estimates of the overall significance level also can be misleading when the test statistics are correlated. We propose that such estimates be conditioned on a simple measure of the spread of the observed histogram, and we provide a method for obtaining conditional significance levels. We justify this conditioning using the conditionality principle described by Cox and Hinkley (1974). Application of the method to gene expression data illustrates the circumstances when conditional significance levels are needed.

  9. Statistics

    International Nuclear Information System (INIS)

    2005-01-01

    For the years 2004 and 2005 the figures shown in the tables of Energy Review are partly preliminary. The annual statistics published in Energy Review are presented in more detail in a publication called Energy Statistics that comes out yearly. Energy Statistics also includes historical time-series over a longer period of time (see e.g. Energy Statistics, Statistics Finland, Helsinki 2004.) The applied energy units and conversion coefficients are shown in the back cover of the Review. Explanatory notes to the statistical tables can be found after tables and figures. The figures presents: Changes in GDP, energy consumption and electricity consumption, Carbon dioxide emissions from fossile fuels use, Coal consumption, Consumption of natural gas, Peat consumption, Domestic oil deliveries, Import prices of oil, Consumer prices of principal oil products, Fuel prices in heat production, Fuel prices in electricity production, Price of electricity by type of consumer, Average monthly spot prices at the Nord pool power exchange, Total energy consumption by source and CO 2 -emissions, Supplies and total consumption of electricity GWh, Energy imports by country of origin in January-June 2003, Energy exports by recipient country in January-June 2003, Consumer prices of liquid fuels, Consumer prices of hard coal, natural gas and indigenous fuels, Price of natural gas by type of consumer, Price of electricity by type of consumer, Price of district heating by type of consumer, Excise taxes, value added taxes and fiscal charges and fees included in consumer prices of some energy sources and Energy taxes, precautionary stock fees and oil pollution fees

  10. Study of developing a database of energy statistics

    Energy Technology Data Exchange (ETDEWEB)

    Park, T.S. [Korea Energy Economics Institute, Euiwang (Korea, Republic of)

    1997-08-01

    An integrated energy database should be prepared in advance for managing energy statistics comprehensively. However, since much manpower and budget is required for developing an integrated energy database, it is difficult to establish a database within a short period of time. Therefore, this study sets the purpose in drawing methods to analyze existing statistical data lists and to consolidate insufficient data as first stage work for the energy database, and at the same time, in analyzing general concepts and the data structure of the database. I also studied the data content and items of energy databases in operation in international energy-related organizations such as IEA, APEC, Japan, and the USA as overseas cases as well as domestic conditions in energy databases, and the hardware operating systems of Japanese databases. I analyzed the making-out system of Korean energy databases, discussed the KEDB system which is representative of total energy databases, and present design concepts for new energy databases. In addition, I present the establishment directions and their contents of future Korean energy databases, data contents that should be collected by supply and demand statistics, and the establishment of data collection organization, etc. by analyzing the Korean energy statistical data and comparing them with the system of OECD/IEA. 26 refs., 15 figs., 11 tabs.

  11. Queensland Energy Advisory Council's, annual review and energy statistics, 1982

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    Queensland Energy Advisory Council (QEAC) role covers all forms of energy including renewable, non-renewable, commercialised and non-commercialised energy forms or proposals. While coal developments and electricity matters are discussed and monitored at meetings, the Mines Department and the State Electricity Commission, respectively, retain responsibility for most aspects in these energy sectors. In such cases QEAC's expertise and role is limited and is advisory. In other areas such as energy conservation, management of liquid fuel emergencies, natural gas supply and demand, solar energy, coal conversion, and ethanol production, QEAC made a significant contribution to policy development in 1981/82.

  12. Statistics

    International Nuclear Information System (INIS)

    2001-01-01

    For the year 2000, part of the figures shown in the tables of the Energy Review are preliminary or estimated. The annual statistics of the Energy Review appear in more detail from the publication Energiatilastot - Energy Statistics issued annually, which also includes historical time series over a longer period (see e.g. Energiatilastot 1999, Statistics Finland, Helsinki 2000, ISSN 0785-3165). The inside of the Review's back cover shows the energy units and the conversion coefficients used for them. Explanatory notes to the statistical tables can be found after tables and figures. The figures presents: Changes in the volume of GNP and energy consumption, Changes in the volume of GNP and electricity, Coal consumption, Natural gas consumption, Peat consumption, Domestic oil deliveries, Import prices of oil, Consumer prices of principal oil products, Fuel prices for heat production, Fuel prices for electricity production, Carbon dioxide emissions from the use of fossil fuels, Total energy consumption by source and CO 2 -emissions, Electricity supply, Energy imports by country of origin in 2000, Energy exports by recipient country in 2000, Consumer prices of liquid fuels, Consumer prices of hard coal, natural gas and indigenous fuels, Average electricity price by type of consumer, Price of district heating by type of consumer, Excise taxes, value added taxes and fiscal charges and fees included in consumer prices of some energy sources and Energy taxes and precautionary stock fees on oil products

  13. Statistics

    International Nuclear Information System (INIS)

    2000-01-01

    For the year 1999 and 2000, part of the figures shown in the tables of the Energy Review are preliminary or estimated. The annual statistics of the Energy Review appear in more detail from the publication Energiatilastot - Energy Statistics issued annually, which also includes historical time series over a longer period (see e.g., Energiatilastot 1998, Statistics Finland, Helsinki 1999, ISSN 0785-3165). The inside of the Review's back cover shows the energy units and the conversion coefficients used for them. Explanatory notes to the statistical tables can be found after tables and figures. The figures presents: Changes in the volume of GNP and energy consumption, Changes in the volume of GNP and electricity, Coal consumption, Natural gas consumption, Peat consumption, Domestic oil deliveries, Import prices of oil, Consumer prices of principal oil products, Fuel prices for heat production, Fuel prices for electricity production, Carbon dioxide emissions, Total energy consumption by source and CO 2 -emissions, Electricity supply, Energy imports by country of origin in January-March 2000, Energy exports by recipient country in January-March 2000, Consumer prices of liquid fuels, Consumer prices of hard coal, natural gas and indigenous fuels, Average electricity price by type of consumer, Price of district heating by type of consumer, Excise taxes, value added taxes and fiscal charges and fees included in consumer prices of some energy sources and Energy taxes and precautionary stock fees on oil products

  14. Statistics

    International Nuclear Information System (INIS)

    1999-01-01

    For the year 1998 and the year 1999, part of the figures shown in the tables of the Energy Review are preliminary or estimated. The annual statistics of the Energy Review appear in more detail from the publication Energiatilastot - Energy Statistics issued annually, which also includes historical time series over a longer period (see e.g. Energiatilastot 1998, Statistics Finland, Helsinki 1999, ISSN 0785-3165). The inside of the Review's back cover shows the energy units and the conversion coefficients used for them. Explanatory notes to the statistical tables can be found after tables and figures. The figures presents: Changes in the volume of GNP and energy consumption, Changes in the volume of GNP and electricity, Coal consumption, Natural gas consumption, Peat consumption, Domestic oil deliveries, Import prices of oil, Consumer prices of principal oil products, Fuel prices for heat production, Fuel prices for electricity production, Carbon dioxide emissions, Total energy consumption by source and CO 2 -emissions, Electricity supply, Energy imports by country of origin in January-June 1999, Energy exports by recipient country in January-June 1999, Consumer prices of liquid fuels, Consumer prices of hard coal, natural gas and indigenous fuels, Average electricity price by type of consumer, Price of district heating by type of consumer, Excise taxes, value added taxes and fiscal charges and fees included in consumer prices of some energy sources and Energy taxes and precautionary stock fees on oil products

  15. 1984 Statistical symposium on national energy issues: proceedings

    International Nuclear Information System (INIS)

    Kinnison, R.; Doctor, P.

    1985-07-01

    The 1984 Statistical Symposium on National Energy Issues was the tenth in a series of annual symposia bringing together statisticians and other interested parties who are actively engaged in the pursuit of solving the nation's energy problems. Initially the symposium was sponsored by US Department of Energy (DOE) and named the DOE Statistical Symposium. The symposium is organized by a steering committee made up of representatives from the national laboratories. The 1984 symposium was hosted by Pacific Northwest Laboratory, and it was organized around four special topical sessions: (1) assessing and assuring high reliability, (2) spatial statistical, (3) quantification of informed opinion, and (4) health effects of energy technologies. These were chosen by the steering committee as topics currently of high importance in energy research and data analysis. Several contributed papers were also presented. Separate abstracts have been prepared for 17 papers for inclusion in the Energy Data Base

  16. Temporal scaling and spatial statistical analyses of groundwater level fluctuations

    Science.gov (United States)

    Sun, H.; Yuan, L., Sr.; Zhang, Y.

    2017-12-01

    Natural dynamics such as groundwater level fluctuations can exhibit multifractionality and/or multifractality due likely to multi-scale aquifer heterogeneity and controlling factors, whose statistics requires efficient quantification methods. This study explores multifractionality and non-Gaussian properties in groundwater dynamics expressed by time series of daily level fluctuation at three wells located in the lower Mississippi valley, after removing the seasonal cycle in the temporal scaling and spatial statistical analysis. First, using the time-scale multifractional analysis, a systematic statistical method is developed to analyze groundwater level fluctuations quantified by the time-scale local Hurst exponent (TS-LHE). Results show that the TS-LHE does not remain constant, implying the fractal-scaling behavior changing with time and location. Hence, we can distinguish the potentially location-dependent scaling feature, which may characterize the hydrology dynamic system. Second, spatial statistical analysis shows that the increment of groundwater level fluctuations exhibits a heavy tailed, non-Gaussian distribution, which can be better quantified by a Lévy stable distribution. Monte Carlo simulations of the fluctuation process also show that the linear fractional stable motion model can well depict the transient dynamics (i.e., fractal non-Gaussian property) of groundwater level, while fractional Brownian motion is inadequate to describe natural processes with anomalous dynamics. Analysis of temporal scaling and spatial statistics therefore may provide useful information and quantification to understand further the nature of complex dynamics in hydrology.

  17. Universality of correlations of levels with discrete statistics

    OpenAIRE

    Brezin, Edouard; Kazakov, Vladimir

    1999-01-01

    We study the statistics of a system of N random levels with integer values, in the presence of a logarithmic repulsive potential of Dyson type. This probleme arises in sums over representations (Young tableaux) of GL(N) in various matrix problems and in the study of statistics of partitions for the permutation group. The model is generalized to include an external source and its correlators are found in closed form for any N. We reproduce the density of levels in the large N and double scalin...

  18. Statistics

    International Nuclear Information System (INIS)

    2003-01-01

    For the year 2002, part of the figures shown in the tables of the Energy Review are partly preliminary. The annual statistics of the Energy Review also includes historical time-series over a longer period (see e.g. Energiatilastot 2001, Statistics Finland, Helsinki 2002). The applied energy units and conversion coefficients are shown in the inside back cover of the Review. Explanatory notes to the statistical tables can be found after tables and figures. The figures presents: Changes in GDP, energy consumption and electricity consumption, Carbon dioxide emissions from fossile fuels use, Coal consumption, Consumption of natural gas, Peat consumption, Domestic oil deliveries, Import prices of oil, Consumer prices of principal oil products, Fuel prices in heat production, Fuel prices in electricity production, Price of electricity by type of consumer, Average monthly spot prices at the Nord pool power exchange, Total energy consumption by source and CO 2 -emissions, Supply and total consumption of electricity GWh, Energy imports by country of origin in January-June 2003, Energy exports by recipient country in January-June 2003, Consumer prices of liquid fuels, Consumer prices of hard coal, natural gas and indigenous fuels, Price of natural gas by type of consumer, Price of electricity by type of consumer, Price of district heating by type of consumer, Excise taxes, value added taxes and fiscal charges and fees included in consumer prices of some energy sources and Excise taxes, precautionary stock fees on oil pollution fees on energy products

  19. Statistics

    International Nuclear Information System (INIS)

    2000-01-01

    For the year 1999 and 2000, part of the figures shown in the tables of the Energy Review are preliminary or estimated. The annual statistics of the Energy also includes historical time series over a longer period (see e.g., Energiatilastot 1999, Statistics Finland, Helsinki 2000, ISSN 0785-3165). The inside of the Review's back cover shows the energy units and the conversion coefficients used for them. Explanatory notes to the statistical tables can be found after tables and figures. The figures presents: Changes in the volume of GNP and energy consumption, Changes in the volume of GNP and electricity, Coal consumption, Natural gas consumption, Peat consumption, Domestic oil deliveries, Import prices of oil, Consumer prices of principal oil products, Fuel prices for heat production, Fuel prices for electricity production, Carbon dioxide emissions, Total energy consumption by source and CO 2 -emissions, Electricity supply, Energy imports by country of origin in January-June 2000, Energy exports by recipient country in January-June 2000, Consumer prices of liquid fuels, Consumer prices of hard coal, natural gas and indigenous fuels, Average electricity price by type of consumer, Price of district heating by type of consumer, Excise taxes, value added taxes and fiscal charges and fees included in consumer prices of some energy sources and Energy taxes and precautionary stock fees on oil products

  20. High energy behaviour of particles and unified statistics

    International Nuclear Information System (INIS)

    Chang, Y.

    1984-01-01

    Theories and experiments suggest that particles at high energy appear to possess a new statistics unifying Bose-Einstein and Fermi-Dirac statistics via the GAMMA distribution. This hypothesis can be obtained from many models, and agrees quantitatively with scaling, the multiplicty, large transverse momentum, the mass spectrum, and other data. It may be applied to scatterings at high energy, and agrees with experiments and known QED's results. The Veneziano model and other theories have implied new statistics, such as, the B distribution and the Polya distribution. They revert to the GAMMA distribution at high energy. The possible inapplicability of Pauli's exclusion principle within the unified statistics is considered and associated to the quark constituents

  1. Statistical Modeling of Energy Production by Photovoltaic Farms

    Czech Academy of Sciences Publication Activity Database

    Brabec, Marek; Pelikán, Emil; Krč, Pavel; Eben, Kryštof; Musílek, P.

    2011-01-01

    Roč. 5, č. 9 (2011), s. 785-793 ISSN 1934-8975 Grant - others:GA AV ČR(CZ) M100300904 Institutional research plan: CEZ:AV0Z10300504 Keywords : electrical energy * solar energy * numerical weather prediction model * nonparametric regression * beta regression Subject RIV: BB - Applied Statistics, Operational Research

  2. Energy statistics France - June 2008; Statistiques energetiques France - juin 2008

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This document summarizes in a series of tables and graphics the energy statistics for France for the last decades and up to 2007: resources, uses, prices, net imports and domestic market consumption for petroleum, natural gas, electricity, and solid mineral fuels (coal, lignite, coke). 2007 statistics are presented separately for each energy source (availability, uses). The evolution of the domestic energy production and consumption and the end-use consumption per sector is also summarized for the last decades. Some primary consumption forecasts are given for 2030. (J.S.)

  3. Statistics

    International Nuclear Information System (INIS)

    2004-01-01

    For the year 2003 and 2004, the figures shown in the tables of the Energy Review are partly preliminary. The annual statistics of the Energy Review also includes historical time-series over a longer period (see e.g. Energiatilastot, Statistics Finland, Helsinki 2003, ISSN 0785-3165). The applied energy units and conversion coefficients are shown in the inside back cover of the Review. Explanatory notes to the statistical tables can be found after tables and figures. The figures presents: Changes in GDP, energy consumption and electricity consumption, Carbon dioxide emissions from fossile fuels use, Coal consumption, Consumption of natural gas, Peat consumption, Domestic oil deliveries, Import prices of oil, Consumer prices of principal oil products, Fuel prices in heat production, Fuel prices in electricity production, Price of electricity by type of consumer, Average monthly spot prices at the Nord pool power exchange, Total energy consumption by source and CO 2 -emissions, Supplies and total consumption of electricity GWh, Energy imports by country of origin in January-March 2004, Energy exports by recipient country in January-March 2004, Consumer prices of liquid fuels, Consumer prices of hard coal, natural gas and indigenous fuels, Price of natural gas by type of consumer, Price of electricity by type of consumer, Price of district heating by type of consumer, Excise taxes, value added taxes and fiscal charges and fees included in consumer prices of some energy sources and Excise taxes, precautionary stock fees on oil pollution fees

  4. The building network energy statistics 2004[Norway]; Bygningsnettverkets energistatistikk 2004

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    The energy statistics for 2004 is the 8th in a row from the building network. The report presents analysis and statistics for various building energy use and technical installations. There are 1907 building objects included in the statistics situated in 254 of the counties in the country. In all this includes 9.3 mill. square meters heated area. Out of this 2.5 % residences is mainly constituted of department buildings. The rest is non-residential buildings in total 7.6 % of the entire building mass in Norway. The total energy consumption in the selection in 2004 is approx. 2.4 TWh. The climate in Norway in 2004 was the 6th warmest since the measurements started for 138 years ago. The report includes energy gradient figures and energy use from various climatic zones. The report shows the energy consumption distributed on various building types, variations in the energy consumption depending on the type of heating system, cooling, building sizes, ages and other factors. Figures for the energy consumption related to building function are included. Approx. 60 % of the buildings is new since the last yearly report. Those that were included in the 2003 report show a reduction in the temperature corrected specific energy consumption of 4.7 % from 2003 to 2004. The oil consumption has been reduced the most. Several building types have reduced the oil consumption with 50% and the total reduction is about 11 mill. litres of oil. The reasons are partly a switch to electric heating systems and partly a general reduction of the energy consumption. The report also includes statistics regarding technical conditions in the buildings such as heating system types, energy carriers, cooling, ventilation, energy flexibility, utilization and other factors. (tk)

  5. Perceived Statistical Knowledge Level and Self-Reported Statistical Practice Among Academic Psychologists

    Directory of Open Access Journals (Sweden)

    Laura Badenes-Ribera

    2018-06-01

    Full Text Available Introduction: Publications arguing against the null hypothesis significance testing (NHST procedure and in favor of good statistical practices have increased. The most frequently mentioned alternatives to NHST are effect size statistics (ES, confidence intervals (CIs, and meta-analyses. A recent survey conducted in Spain found that academic psychologists have poor knowledge about effect size statistics, confidence intervals, and graphic displays for meta-analyses, which might lead to a misinterpretation of the results. In addition, it also found that, although the use of ES is becoming generalized, the same thing is not true for CIs. Finally, academics with greater knowledge about ES statistics presented a profile closer to good statistical practice and research design. Our main purpose was to analyze the extension of these results to a different geographical area through a replication study.Methods: For this purpose, we elaborated an on-line survey that included the same items as the original research, and we asked academic psychologists to indicate their level of knowledge about ES, their CIs, and meta-analyses, and how they use them. The sample consisted of 159 Italian academic psychologists (54.09% women, mean age of 47.65 years. The mean number of years in the position of professor was 12.90 (SD = 10.21.Results: As in the original research, the results showed that, although the use of effect size estimates is becoming generalized, an under-reporting of CIs for ES persists. The most frequent ES statistics mentioned were Cohen's d and R2/η2, which can have outliers or show non-normality or violate statistical assumptions. In addition, academics showed poor knowledge about meta-analytic displays (e.g., forest plot and funnel plot and quality checklists for studies. Finally, academics with higher-level knowledge about ES statistics seem to have a profile closer to good statistical practices.Conclusions: Changing statistical practice is not

  6. Predicting energy performance of a net-zero energy building: A statistical approach

    International Nuclear Information System (INIS)

    Kneifel, Joshua; Webb, David

    2016-01-01

    Highlights: • A regression model is applied to actual energy data from a net-zero energy building. • The model is validated through a rigorous statistical analysis. • Comparisons are made between model predictions and those of a physics-based model. • The model is a viable baseline for evaluating future models from the energy data. - Abstract: Performance-based building requirements have become more prevalent because it gives freedom in building design while still maintaining or exceeding the energy performance required by prescriptive-based requirements. In order to determine if building designs reach target energy efficiency improvements, it is necessary to estimate the energy performance of a building using predictive models and different weather conditions. Physics-based whole building energy simulation modeling is the most common approach. However, these physics-based models include underlying assumptions and require significant amounts of information in order to specify the input parameter values. An alternative approach to test the performance of a building is to develop a statistically derived predictive regression model using post-occupancy data that can accurately predict energy consumption and production based on a few common weather-based factors, thus requiring less information than simulation models. A regression model based on measured data should be able to predict energy performance of a building for a given day as long as the weather conditions are similar to those during the data collection time frame. This article uses data from the National Institute of Standards and Technology (NIST) Net-Zero Energy Residential Test Facility (NZERTF) to develop and validate a regression model to predict the energy performance of the NZERTF using two weather variables aggregated to the daily level, applies the model to estimate the energy performance of hypothetical NZERTFs located in different cities in the Mixed-Humid Climate Zone, and compares these

  7. Confidence Level Computation for Combining Searches with Small Statistics

    OpenAIRE

    Junk, Thomas

    1999-01-01

    This article describes an efficient procedure for computing approximate confidence levels for searches for new particles where the expected signal and background levels are small enough to require the use of Poisson statistics. The results of many independent searches for the same particle may be combined easily, regardless of the discriminating variables which may be measured for the candidate events. The effects of systematic uncertainty in the signal and background models are incorporated ...

  8. Statistical investigation of expected wave energy and its reliability

    International Nuclear Information System (INIS)

    Ozger, M.; Altunkaynak, A.; Sen, Z.

    2004-01-01

    The statistical behavior of wave energy at a single site is derived by considering simultaneous variations in the period and wave height. In this paper, the general wave power formulation is derived by using the theory of perturbation. This method leads to a general formulation of the wave power expectation and other statistical parameter expressions, such as standard deviation and coefficient of variation. The statistical parameters, namely the mean value and variance of wave energy, are found in terms of the simple statistical parameters of period, significant wave height and zero up-crossing period. The elegance of these parameters is that they are distribution free. These parameters provide a means for defining the wave energy distribution function by employing the Chebyschev's inequality. Subsequently, an approximate probability distribution function of the wave energy is also derived for assessment of risk and reliability associated with wave energy. Necessary simple charts are given for risk and reliability assessments. Two procedures are presented for such assessments in wave energy calculations and the applications of these procedures are provided for wave energy potential assessment in the regions of the Pacific Ocean off the west coast of U.S. (author)

  9. Statistical investigation of expected wave energy and its reliability

    International Nuclear Information System (INIS)

    Oezger, Mehmet; Altunkaynak, Abduesselam; Sen, Zekai

    2004-01-01

    The statistical behavior of wave energy at a single site is derived by considering simultaneous variations in the period and wave height. In this paper, the general wave power formulation is derived by using the theory of perturbation. This method leads to a general formulation of the wave power expectation and other statistical parameter expressions, such as standard deviation and coefficient of variation. The statistical parameters, namely the mean value and variance of wave energy, are found in terms of the simple statistical parameters of period, significant wave height and zero up-crossing period. The elegance of these parameters is that they are distribution free. These parameters provide a means for defining the wave energy distribution function by employing the Chebyschev's inequality. Subsequently, an approximate probability distribution function of the wave energy is also derived for assessment of risk and reliability associated with wave energy. Necessary simple charts are given for risk and reliability assessments. Two procedures are presented for such assessments in wave energy calculations and the applications of these procedures are provided for wave energy potential assessment in the regions of the Pacific Ocean off the west coast of U.S

  10. Corrected Statistical Energy Analysis Model for Car Interior Noise

    Directory of Open Access Journals (Sweden)

    A. Putra

    2015-01-01

    Full Text Available Statistical energy analysis (SEA is a well-known method to analyze the flow of acoustic and vibration energy in a complex structure. For an acoustic space where significant absorptive materials are present, direct field component from the sound source dominates the total sound field rather than a reverberant field, where the latter becomes the basis in constructing the conventional SEA model. Such environment can be found in a car interior and thus a corrected SEA model is proposed here to counter this situation. The model is developed by eliminating the direct field component from the total sound field and only the power after the first reflection is considered. A test car cabin was divided into two subsystems and by using a loudspeaker as a sound source, the power injection method in SEA was employed to obtain the corrected coupling loss factor and the damping loss factor from the corrected SEA model. These parameters were then used to predict the sound pressure level in the interior cabin using the injected input power from the engine. The results show satisfactory agreement with the directly measured SPL.

  11. Statistical models describing the energy signature of buildings

    DEFF Research Database (Denmark)

    Bacher, Peder; Madsen, Henrik; Thavlov, Anders

    2010-01-01

    Approximately one third of the primary energy production in Denmark is used for heating in buildings. Therefore efforts to accurately describe and improve energy performance of the building mass are very important. For this purpose statistical models describing the energy signature of a building, i...... or varying energy prices. The paper will give an overview of statistical methods and applied models based on experiments carried out in FlexHouse, which is an experimental building in SYSLAB, Risø DTU. The models are of different complexity and can provide estimates of physical quantities such as UA......-values, time constants of the building, and other parameters related to the heat dynamics. A method for selecting the most appropriate model for a given building is outlined and finally a perspective of the applications is given. Aknowledgements to the Danish Energy Saving Trust and the Interreg IV ``Vind i...

  12. A neighborhood statistics model for predicting stream pathogen indicator levels.

    Science.gov (United States)

    Pandey, Pramod K; Pasternack, Gregory B; Majumder, Mahbubul; Soupir, Michelle L; Kaiser, Mark S

    2015-03-01

    Because elevated levels of water-borne Escherichia coli in streams are a leading cause of water quality impairments in the U.S., water-quality managers need tools for predicting aqueous E. coli levels. Presently, E. coli levels may be predicted using complex mechanistic models that have a high degree of unchecked uncertainty or simpler statistical models. To assess spatio-temporal patterns of instream E. coli levels, herein we measured E. coli, a pathogen indicator, at 16 sites (at four different times) within the Squaw Creek watershed, Iowa, and subsequently, the Markov Random Field model was exploited to develop a neighborhood statistics model for predicting instream E. coli levels. Two observed covariates, local water temperature (degrees Celsius) and mean cross-sectional depth (meters), were used as inputs to the model. Predictions of E. coli levels in the water column were compared with independent observational data collected from 16 in-stream locations. The results revealed that spatio-temporal averages of predicted and observed E. coli levels were extremely close. Approximately 66 % of individual predicted E. coli concentrations were within a factor of 2 of the observed values. In only one event, the difference between prediction and observation was beyond one order of magnitude. The mean of all predicted values at 16 locations was approximately 1 % higher than the mean of the observed values. The approach presented here will be useful while assessing instream contaminations such as pathogen/pathogen indicator levels at the watershed scale.

  13. The world energy consumption in 2001. Statistical yearbook ENERDATA 2002

    International Nuclear Information System (INIS)

    2002-01-01

    Statistical data on the world energy consumption are given to illustrate the following situation in 2001: the deceleration of the world economic growth and the high prices of oil slowed down the progression of the energy consumption: 0,7 % in 2001; stagnation of the gas and oil consumption and strong progression for coal and electricity in 2001; the deceleration for gas marks a strong inflection compared to the past trends. (A.L.B.)

  14. Statistical Analysis of Development Trends in Global Renewable Energy

    Directory of Open Access Journals (Sweden)

    Marina D. Simonova

    2016-01-01

    Full Text Available The article focuses on the economic and statistical analysis of industries associated with the use of renewable energy sources in several countries. The dynamic development and implementation of technologies based on renewable energy sources (hereinafter RES is the defining trend of world energy development. The uneven distribution of hydrocarbon reserves, increasing demand of developing countries and environmental risks associated with the production and consumption of fossil resources has led to an increasing interest of many states to this field. Creating low-carbon economies involves the implementation of plans to increase the proportion of clean energy through renewable energy sources, energy efficiency, reduce greenhouse gas emissions. The priority of this sector is a characteristic feature of modern development of developed (USA, EU, Japan and emerging economies (China, India, Brazil, etc., as evidenced by the inclusion of the development of this segment in the state energy strategies and the revision of existing approaches to energy security. The analysis of the use of renewable energy, its contribution to value added of countries-producers is of a particular interest. Over the last decade, the share of energy produced from renewable sources in the energy balances of the world's largest economies increased significantly. Every year the number of power generating capacity based on renewable energy is growing, especially, this trend is apparent in China, USA and European Union countries. There is a significant increase in direct investment in renewable energy. The total investment over the past ten years increased by 5.6 times. The most rapidly developing kinds are solar energy and wind power.

  15. The Heuristics of Statistical Argumentation: Scaffolding at the Postsecondary Level

    Science.gov (United States)

    Pardue, Teneal Messer

    2017-01-01

    Language plays a key role in statistics and, by extension, in statistics education. Enculturating students into the practice of statistics requires preparing them to communicate results of data analysis. Statistical argumentation is one way of providing structure to facilitate discourse in the statistics classroom. In this study, a teaching…

  16. Split energy level radiation detection

    International Nuclear Information System (INIS)

    Barnes, G.T.

    1986-01-01

    This patent describes an energy discriminating radiation detector comprising: (a) a first element comprising a first material of a kind which is preferentially responsive to penetrative radiation of a first energy range; (b) a second element comprising a second material different in kind from the first material and of a kind which is preferentially responsive to penetrative radiation of second energy range extending higher than the first energy range. The element is positioned to receive radiation which has penetrated through a portion of the first element; and (c) a filter of penetrative radiation interposed between the first and second elements

  17. Statistical inference of level densities from resolved resonance parameters

    International Nuclear Information System (INIS)

    Froehner, F.H.

    1983-08-01

    Level densities are most directly obtained by counting the resonances observed in the resolved resonance range. Even in the measurements, however, weak levels are invariably missed so that one has to estimate their number and add it to the raw count. The main categories of missinglevel estimators are discussed in the present review, viz. (I) ladder methods including those based on the theory of Hamiltonian matrix ensembles (Dyson-Mehta statistics), (II) methods based on comparison with artificial cross section curves (Monte Carlo simulation, Garrison's autocorrelation method), (III) methods exploiting the observed neutron width distribution by means of Bayesian or more approximate procedures such as maximum-likelihood, least-squares or moment methods, with various recipes for the treatment of detection thresholds and resolution effects. The language of mathematical statistics is employed to clarify the basis of, and the relationship between, the various techniques. Recent progress in the treatment of resolution effects, detection thresholds and p-wave admixture is described. (orig.) [de

  18. Dynamical and statistical aspects of intermediate energy heavy ion collisions

    International Nuclear Information System (INIS)

    Knoll, J.

    1987-01-01

    The lectures presented deal with three different topics relevant for the discussion of nuclear collisions at medium to high energies. The first lecture concerns a subject of general interest, the description of statistical systems and their dynamics by the concept of missing information. If presents an excellent scope to formulate statistical theories in such a way that they carefully keep track of the known (relevant) information while maximizing the ignorance about the irrelevant, unknown information. The last two lectures deal with quite actual questions of intermediate energy heavy-ion collisions. These are the multi-fragmentation dynamics of highly excited nuclear systems, and the so called subthreshold particle production. All three subjects are self-contained, and can be read without the knowledge about the other ones. (orig.)

  19. Wind power statistics and an evaluation of wind energy density

    Energy Technology Data Exchange (ETDEWEB)

    Jamil, M.; Parsa, S.; Majidi, M. [Materials and Energy Research Centre, Tehran (Iran, Islamic Republic of)

    1995-11-01

    In this paper the statistical data of fifty days` wind speed measurements at the MERC- solar site are used to find out the wind energy density and other wind characteristics with the help of the Weibull probability distribution function. It is emphasized that the Weibull and Rayleigh probability functions are useful tools for wind energy density estimation but are not quite appropriate for properly fitting the actual wind data of low mean speed, short-time records. One has to use either the actual wind data (histogram) or look for a better fit by other models of the probability function. (Author)

  20. Proposal to Include Electrical Energy in the Industrial Return Statistics

    CERN Document Server

    2003-01-01

    At its 108th session on the 20 June 1997, the Council approved the Report of the Finance Committee Working Group on the Review of CERN Purchasing Policy and Procedures. Among other topics, the report recommended the inclusion of utility supplies in the calculation of the return statistics as soon as the relevant markets were deregulated, without reaching a consensus on the exact method of calculation. At its 296th meeting on the 18 June 2003, the Finance Committee approved a proposal to award a contract for the supply of electrical energy (CERN/FC/4693). The purpose of the proposal in this document is to clarify the way electrical energy will be included in future calculations of the return statistics. The Finance Committee is invited: 1. to agree that the full cost to CERN of electrical energy (excluding the cost of transport) be included in the Industrial Service return statistics; 2. to recommend that the Council approves the corresponding amendment to the Financial Rules set out in section 2 of this docum...

  1. Statistics and predictions of population, energy and environment problems

    International Nuclear Information System (INIS)

    Sobajima, Makoto

    1999-03-01

    In the situation that world's population, especially in developing countries, is rapidly growing, humankind is facing to global problems that they cannot steadily live unless they find individual places to live, obtain foods, and peacefully get energy necessary for living for centuries. For this purpose, humankind has to think what behavior they should take in the finite environment, talk, agree and execute. Though energy has been long respected as a symbol for improving living, demanded and used, they have come to limit the use making the global environment more serious. If there is sufficient energy not loading cost to the environment. If nuclear energy regarded as such one sustain the resource for long and has market competitiveness. What situation of realization of compensating new energy is now in the case the use of nuclear energy is restricted by the society fearing radioactivity. If there are promising ones for the future. One concerning with the study of energy cannot go without knowing these. The statistical materials compiled here are thought to be useful for that purpose, and are collected mainly from ones viewing future prediction based on past practices. Studies on the prediction is so important to have future measures that these data bases are expected to be improved for better accuracy. (author)

  2. Brazilian energy statistics - 1996. Annual bulletin of the Brazilian Committee of the World Energy Council

    International Nuclear Information System (INIS)

    1996-01-01

    This bulletin deals with the primary sources that carry most weight in the Brazilian energy balance: hydroelectric energy, petroleum, natural gas and coal. It also contains data on ethyl alcohol derived of sugar cane since it is of special importance in Brazil's energy scenario. Domestic production, petroleum and petroleum product imports, as well as natural gas production statistics are furnished in this bulletin

  3. Swiss energy statistics 2002; Schweizerische Gesamtenergiestatistik 2002/Statistique globale suisse de l'energie 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This comprehensive report by the Swiss Federal Office of Energy (SFOE) presents statistics on energy production and consumption in Switzerland in 2002. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The report also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2002 and energy use in various sectors are presented. Also, the Swiss energy balance with reference to the use of renewable forms of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power. The third chapter provides data on the individual energy carriers and the final chapter looks at economical and ecological aspects. An appendix provides information on the methodology used in collecting the statistics and on data available in the Swiss cantons.

  4. Swiss energy statistics 2004; Schweizerische Gesamtenergiestatistik 2004/Statistique globale suisse de l'energie 2004

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This comprehensive report by the Swiss Federal Office of Energy (SFOE) presents statistics on energy production and consumption in Switzerland in 2004. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The report also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2004 and energy use in various sectors are presented. Also, the Swiss energy balance with reference to the use of renewable forms of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power. The third chapter provides data on the individual energy carriers and the final chapter looks at economical and ecological aspects. An appendix provides information on the methodology used in collecting the statistics and on data available in the Swiss cantons.

  5. Swiss energy statistics 2005; Schweizerische Gesamtenergiestatistik 2005/Statistique globale suisse de l'energie 2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This comprehensive report by the Swiss Federal Office of Energy (SFOE) presents statistics on energy production and consumption in Switzerland in 2005. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The report also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2005 and energy use in various sectors are presented. Also, the Swiss energy balance with reference to the use of renewable forms of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power. The third chapter provides data on the individual energy carriers and the final chapter looks at economical and ecological aspects. An appendix provides information on the methodology used in collecting the statistics and on data available in the Swiss cantons.

  6. Swiss energy statistics 2003; Schweizerische Gesamtenergiestatistik 2003/Statistique globale suisse de l'energie 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This comprehensive report by the Swiss Federal Office of Energy (SFOE) presents statistics on energy production and consumption in Switzerland in 2003. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The report also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2003 and energy use in various sectors are presented. Also, the Swiss energy balance with reference to the use of renewable forms of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power. The third chapter provides data on the individual energy carriers and the final chapter looks at economical and ecological aspects. An appendix provides information on the methodology used in collecting the statistics and on data available in the Swiss cantons.

  7. Swiss energy statistics 2006; Schweizerische Gesamtenergiestatistik 2006/Statistique globale suisse de l'energie 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    This comprehensive report by the Swiss Federal Office of Energy (SFOE) presents statistics on energy production and consumption in Switzerland in 2006. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The report also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2006 and energy use in various sectors are presented. Also, the Swiss energy balance with reference to the use of renewable forms of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power. The third chapter provides data on the individual energy carriers and the final chapter looks at economical and ecological aspects. An appendix provides information on the methodology used in collecting the statistics and on data available in the Swiss cantons.

  8. Swiss statistics on renewable energy - Biogas - Partial statistics for 2001; Schweizerische Statistik erneuerbarer Energietraeger

    Energy Technology Data Exchange (ETDEWEB)

    Engeli, H.

    2000-07-01

    This report for the Swiss Federal Office of Energy presents comprehensive statistics on biogas installations for the year 2001. Data is presented on biogas installations on farms and in industry, in wastewater treatment facilities. Also, data is given on biogenic wastes and co-fermentation. Summaries are presented in table form of biogas production per installation category and the use of the biogas for the production of heat and electrical power. Also, figures are given on the production of biofuels. Development trends in the various areas of biogas production are reviewed and an example of a fermentation installation is briefly described.

  9. Statistical Indicators for Religious Studies: Indicators of Level and Structure

    Science.gov (United States)

    Herteliu, Claudiu; Isaic-Maniu, Alexandru

    2009-01-01

    Using statistic indicators as vectors of information relative to the operational status of a phenomenon, including a religious one, is unanimously accepted. By introducing a system of statistic indicators we can also analyze the interfacing areas of a phenomenon. In this context, we have elaborated a system of statistic indicators specific to the…

  10. Energy consumption quota of public buildings based on statistical analysis

    International Nuclear Information System (INIS)

    Zhao Jing; Xin Yajuan; Tong Dingding

    2012-01-01

    The establishment of building energy consumption quota as a comprehensive indicator used to evaluate the actual energy consumption level is an important measure for promoting the development of building energy efficiency. This paper focused on the determination method of the quota, and firstly introduced the procedure of establishing energy consumption quota of public buildings including four important parts: collecting data, classifying and calculating EUIs, standardizing EUIs, determining the measure method of central tendency. The paper also illustrated the standardization process of EUI by actual calculation based on the samples of 10 commercial buildings and 19 hotel buildings. According to the analysis of the frequency distribution of standardized EUIs of sample buildings and combining the characteristics of each measure method of central tendency, comprehensive application of mode and percentage rank is selected to be the best method for determining the energy consumption quota of public buildings. Finally the paper gave some policy proposals on energy consumption quota to help achieve the goal of further energy conservation. - Highlights: ► We introduce the procedure of determining energy consumption quota (ECQ). ► We illustrate the standardization process of EUI by actual calculation of samples. ► Measures of central tendency are brought into determine the ECQ. ► Comprehensive application of mode and percentage rank is the best method for ECQ. ► Punitive or incentive measures for ECQ are proposed.

  11. A review of Ghana’s energy sector national energy statistics and policy framework

    OpenAIRE

    Samuel Asumadu-Sarkodie; Phebe Asantewaa Owusu

    2016-01-01

    In this study, a review of Ghana’s energy sector national energy statistics and policy framework is done to create awareness of the strategic planning and energy policies of Ghana’s energy sector that will serve as an informative tool for both local and foreign investors, help in national decision-making for the efficient development and utilization of energy resources. The review of Ghana’s energy sector policy is to answer the question, what has been done so far? And what is the way forward...

  12. Swiss energy statistics 2008; Schweizerische Gesamtenergiestatistik 2008 / Statistique globale suisse de l'energie 2008

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-08-15

    This comprehensive report made by the Swiss Federal Office of Energy (SFOE) presents the statistics on total energy production and usage in Switzerland for the year 2008. First of all, an overview of Switzerland's energy consumption in 2008 is presented. Details are noted of the proportions of consumption of oil-fuels for heating, oil products for mobility, electricity, gas and various other fuels. The development of consumption over the years 1910 to 2008 is illustrated graphically. A second chapter takes a look at energy flow from production (and import) to the consumer and export. An extensive collection of illustrative flow diagrams, tables and graphical representations of energy flows, statistics for various energy carriers and of the various uses of energy in Switzerland is presented.

  13. Atomic energy levels and Grotrian diagrams

    CERN Document Server

    Bashkin, Stanley

    1975-01-01

    Atomic Energy Levels and Grotrian Diagrams, Volume I: Hydrogen I - Phosphorus XV presents diagrams of various elements that show their energy level and electronic transitions. The book covers the first 15 elements according to their atomic number. The text will be of great use to researchers and practitioners of fields such as astrophysics that requires pictorial representation of the energy levels and electronic transitions of elements.

  14. Topics in statistical data analysis for high-energy physics

    International Nuclear Information System (INIS)

    Cowan, G.

    2011-01-01

    These lectures concert two topics that are becoming increasingly important in the analysis of high-energy physics data: Bayesian statistics and multivariate methods. In the Bayesian approach, we extend the interpretation of probability not only to cover the frequency of repeatable outcomes but also to include a degree of belief. In this way we are able to associate probability with a hypothesis and thus to answer directly questions that cannot be addressed easily with traditional frequentist methods. In multivariate analysis, we try to exploit as much information as possible from the characteristics that we measure for each event to distinguish between event types. In particular we will look at a method that has gained popularity in high-energy physics in recent years: the boosted decision tree. Finally, we give a brief sketch of how multivariate methods may be applied in a search for a new signal process. (author)

  15. Full counting statistics of level renormalization in electron transport through double quantum dots

    International Nuclear Information System (INIS)

    Luo Junyan; Shen Yu; Cen Gang; He Xiaoling; Wang Changrong; Jiao Hujun

    2011-01-01

    We examine the full counting statistics of electron transport through double quantum dots coupled in series, with particular attention being paid to the unique features originating from level renormalization. It is clearly illustrated that the energy renormalization gives rise to a dynamic charge blockade mechanism, which eventually results in super-Poissonian noise. Coupling of the double dots to an external heat bath leads to dephasing and relaxation mechanisms, which are demonstrated to suppress the noise in a unique way.

  16. The Coulomb gap and low energy statistics for Coulomb glasses

    International Nuclear Information System (INIS)

    Glatz, Andreas; Vinokur, Valerii M; Bergli, Joakim; Kirkengen, Martin; Galperin, Yuri M

    2008-01-01

    We study the statistics of local energy minima in the configuration space of two-dimensional lattice Coulomb glasses with site disorder and the behavior of the Coulomb gap depending on the strength of random site energies. At intermediate disorder, i.e., when the typical strength of the disorder is of the same order as the nearest-neighbor Coulomb energy, the high energy tail of the distribution of the local minima is exponential. We furthermore analyze the structure of the local minima and show that most sites of the system have the same occupation numbers in all of these states. The density of states (DOS) shows a transition from the crystalline state at zero disorder (with a hard gap) to an intermediate, probably glassy state with a Coulomb gap. We analyze this Coulomb gap in some detail and show that the DOS deviates slightly from the traditional linear behavior in 2D. For finite systems these intermediate Coulomb gap states disappear for large disorder strengths and only a random localized state in which all electrons are in the minima of the random potential exists. Dedication: This paper is dedicated to Thomas Nattermann, our dearest friend, brilliant colleague, and outstanding teacher

  17. Statistical and dynamical aspects of intermediate energy nuclear collisions

    International Nuclear Information System (INIS)

    Ghetti, R.

    1997-01-01

    Studies of intermediate energy heavy ion reactions have revealed that the probability of emitting n-fragments is reducible to the probability of emitting a single fragment through the binomial distribution. The resulting one-fragment probability shows a dependence on the thermal energy that is characteristic of statistical decay. Similarly, the charge distributions associated with n-fragment emission are reducible to the one-fragment charge distribution, and thermal scaling is observed. The reducibility equation for the n-fragment charge distribution contains a quantity with a value that starts from zero, at low transverse energies, and saturates at high transverse energies. This evolution may signal a transition from a coexistence phase to a vapour phase. In the search for a signal of liquid-gas phase transition, the appearance of intermittency is reconsidered. Percolation calculations, as well as data analysis, indicate that an intermittent-like signal appears from classes of events that do not coincide with the critical one. 232 refs

  18. Statistical and dynamical aspects of intermediate energy nuclear collisions

    Energy Technology Data Exchange (ETDEWEB)

    Ghetti, R.

    1997-01-01

    Studies of intermediate energy heavy ion reactions have revealed that the probability of emitting n-fragments is reducible to the probability of emitting a single fragment through the binomial distribution. The resulting one-fragment probability shows a dependence on the thermal energy that is characteristic of statistical decay. Similarly, the charge distributions associated with n-fragment emission are reducible to the one-fragment charge distribution, and thermal scaling is observed. The reducibility equation for the n-fragment charge distribution contains a quantity with a value that starts from zero, at low transverse energies, and saturates at high transverse energies. This evolution may signal a transition from a coexistence phase to a vapour phase. In the search for a signal of liquid-gas phase transition, the appearance of intermittency is reconsidered. Percolation calculations, as well as data analysis, indicate that an intermittent-like signal appears from classes of events that do not coincide with the critical one. 232 refs.

  19. CONFIDENCE LEVELS AND/VS. STATISTICAL HYPOTHESIS TESTING IN STATISTICAL ANALYSIS. CASE STUDY

    Directory of Open Access Journals (Sweden)

    ILEANA BRUDIU

    2009-05-01

    Full Text Available Estimated parameters with confidence intervals and testing statistical assumptions used in statistical analysis to obtain conclusions on research from a sample extracted from the population. Paper to the case study presented aims to highlight the importance of volume of sample taken in the study and how this reflects on the results obtained when using confidence intervals and testing for pregnant. If statistical testing hypotheses not only give an answer "yes" or "no" to some questions of statistical estimation using statistical confidence intervals provides more information than a test statistic, show high degree of uncertainty arising from small samples and findings build in the "marginally significant" or "almost significant (p very close to 0.05.

  20. Prediction of dimethyl disulfide levels from biosolids using statistical modeling.

    Science.gov (United States)

    Gabriel, Steven A; Vilalai, Sirapong; Arispe, Susanna; Kim, Hyunook; McConnell, Laura L; Torrents, Alba; Peot, Christopher; Ramirez, Mark

    2005-01-01

    Two statistical models were used to predict the concentration of dimethyl disulfide (DMDS) released from biosolids produced by an advanced wastewater treatment plant (WWTP) located in Washington, DC, USA. The plant concentrates sludge from primary sedimentation basins in gravity thickeners (GT) and sludge from secondary sedimentation basins in dissolved air flotation (DAF) thickeners. The thickened sludge is pumped into blending tanks and then fed into centrifuges for dewatering. The dewatered sludge is then conditioned with lime before trucking out from the plant. DMDS, along with other volatile sulfur and nitrogen-containing chemicals, is known to contribute to biosolids odors. These models identified oxidation/reduction potential (ORP) values of a GT and DAF, the amount of sludge dewatered by centrifuges, and the blend ratio between GT thickened sludge and DAF thickened sludge in blending tanks as control variables. The accuracy of the developed regression models was evaluated by checking the adjusted R2 of the regression as well as the signs of coefficients associated with each variable. In general, both models explained observed DMDS levels in sludge headspace samples. The adjusted R2 value of the regression models 1 and 2 were 0.79 and 0.77, respectively. Coefficients for each regression model also had the correct sign. Using the developed models, plant operators can adjust the controllable variables to proactively decrease this odorant. Therefore, these models are a useful tool in biosolids management at WWTPs.

  1. Swiss energy statistics 2001; Schweizerische Gesamtenergiestatistik 2001/Statistique globale suisse de l'energie 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This comprehensive report presents the Swiss Federal Office of Energy's statistics on energy production and consumption in Switzerland in 2001. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The article also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2001 and energy use in various sectors are presented. Finally, the Swiss energy balance with reference to the use of renewable sources of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power.

  2. Swiss energy statistics 2000; Schweizerische Gesamtenergiestatistik 2000/Statistique globale suisse de l'energie 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This comprehensive report presents the Swiss Federal Office of Energy's statistics on energy production and consumption in Switzerland in 2000. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The article also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2000 and energy use in various sectors are presented. Finally, the Swiss energy balance with reference to the use of renewable sources of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power.

  3. Swiss energy statistics 2007; Schweizerische Gesamtenergiestatistik 2007/Statistique globale suisse de l'energie 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This comprehensive report presents the Swiss Federal Office of Energy's statistics on energy production and consumption in Switzerland in 2007. Facts and figures are presented in tables and diagrams. First of all, a general overview of Swiss energy consumption is presented that includes details on the shares taken by the various energy carriers involved and their development during the period reviewed. The article also includes graphical representations of energy usage in various sectors such as households, trade and industry, transport and the services sector. Also, economic data on energy consumption is presented. A second chapter takes a look at energy flows from producers to consumers and presents an energy balance for Switzerland in the form of tables and an energy-flow diagram. The individual energy sources and the import, export and storage of energy carriers are discussed as is the conversion between various forms and categories of energy. Details on the consumption of energy, its growth over the years up to 2007 and energy use in various sectors are presented. Finally, the Swiss energy balance with reference to the use of renewable sources of energy such as solar energy, biomass, wastes and ambient heat is discussed and figures are presented on the contribution of renewables to heating and the generation of electrical power.

  4. Brazilian energy statistics - 1989. Annual bulletin of the Brazilian National Committee of the World Energy Conference

    International Nuclear Information System (INIS)

    1989-01-01

    This bulletin deals with the primary sources that carry most weight in the Brazilian energy balance: hydraulic energy, petroleum, natural gas and coal. It contains data on ethyl alcohol derived from sugar cane and some aspects about nuclear energy in Brazil. Graphs, annual statistics and historical data of electric power, petroleum and petroleum products, natural gas, coal and alcohol are also included. 17 figs., 12 tabs

  5. Brazilian energy statistics - 1988. Annual bulletin of the Brazilian National Committee of the World Energy Conference

    International Nuclear Information System (INIS)

    1988-01-01

    This bulletin deals with the primary sources that carry most weight in the Brazilian energy balance: hydraulic energy, petroleum, natural gas and coal. It contains data on ethyl alcohol derived from sugar cane and some information about the Brazilian Action Plan for the petroleum sector, nuclear energy, ecology and Chernobyl. Graphs, annual statistics and long range data of electric power, petroleum and derivates, natural gas, coal and alcohol are also included. 19 figs., 15 tabs

  6. Regional level approach for increasing energy efficiency

    International Nuclear Information System (INIS)

    Viholainen, Juha; Luoranen, Mika; Väisänen, Sanni; Niskanen, Antti; Horttanainen, Mika; Soukka, Risto

    2016-01-01

    Highlights: • Comprehensive snapshot of regional energy system for decision makers. • Connecting regional sustainability targets and energy planning. • Involving local players in energy planning. - Abstract: Actions for increasing the renewable share in the energy supply and improving both production and end-use energy efficiency are often built into the regional level sustainability targets. Because of this, many local stakeholders such as local governments, energy producers and distributors, industry, and public and private sector operators require information on the current state and development aspects of the regional energy efficiency. The drawback is that an overall view on the focal energy system operators, their energy interests, and future energy service needs in the region is often not available for the stakeholders. To support the local energy planning and management of the regional energy services, an approach for increasing the regional energy efficiency is being introduced. The presented approach can be seen as a solid framework for gathering the required data for energy efficiency analysis and also evaluating the energy system development, planned improvement actions, and the required energy services at the region. This study defines the theoretical structure of the energy efficiency approach and the required steps for revealing such energy system improvement actions that support the regional energy plan. To demonstrate the use of the approach, a case study of a Finnish small-town of Lohja is presented. In the case example, possible actions linked to the regional energy targets were evaluated with energy efficiency analysis. The results of the case example are system specific, but the conducted study can be seen as a justified example of generating easily attainable and transparent information on the impacts of different improvement actions on the regional energy system.

  7. State-Level Benefits of Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Tonn, Bruce Edward [ORNL

    2007-02-01

    This report describes benefits attributable to state-level energy efficiency programs. Nationwide, state-level energy efficiency programs have targeted all sectors of the economy and have employed a wide range of methods to promote energy efficiency. Standard residential and industrial programs typically identify between 20 to 30% energy savings in homes and plants, respectively. Over a 20 year period of time, an average state that aggressively pursues even a limited array of energy efficiency programs can potentially reduce total state energy use by as much as 20%. Benefit-cost ratios of effective energy efficiency programs typically exceed 3 to 1 and are much higher when non-energy and macroeconomic benefits are included. Indeed, energy efficiency and associated programs and investments can create significant numbers of new jobs and enhance state tax revenues. Several states have incorporated energy efficiency into their economic development programs. It should also be noted that increasing amounts of venture capital are being invested in the energy sector in general and in specific technologies like solar power in particular. Well-designed energy efficiency programs can be expected to help overcome numerous barriers to the market penetration of energy efficient technologies and accelerate the market penetration of the technologies.

  8. State-level benefits of energy efficiency

    International Nuclear Information System (INIS)

    Tonn, Bruce; Peretz, Jean H.

    2007-01-01

    This paper describes benefits attributable to state-level energy efficiency programs. Nationwide, state-level energy efficiency programs have targeted all sectors of the economy and have employed a wide range of methods to promote energy efficiency. Standard residential and industrial programs typically identify between 20% and 30% energy savings in homes and plants, respectively. Over a 20-year period of time, an average state that aggressively pursues even a limited array of energy efficiency programs can potentially reduce total state energy use by as much as 20%. Well-designed energy efficiency programs can be expected to help overcome numerous barriers to the market penetration of energy efficient technologies and accelerate the market penetration of the technologies. Energy efficiency programs are cost-effective; typical benefit-cost ratios exceed 3:1 and are much higher when non-energy and macroeconomic benefits are included. Indeed, energy efficiency and associated programs and investments can create significant numbers of new jobs and enhance state tax revenues. Several states have incorporated energy efficiency into their economic development programs. It should also be noted that increasing amounts of venture capital are being invested in the energy sector in general and in specific technologies like solar power in particular. (author)

  9. Modeling and forecasting energy consumption for heterogeneous buildings using a physical–statistical approach

    International Nuclear Information System (INIS)

    Lü, Xiaoshu; Lu, Tao; Kibert, Charles J.; Viljanen, Martti

    2015-01-01

    Highlights: • This paper presents a new modeling method to forecast energy demands. • The model is based on physical–statistical approach to improving forecast accuracy. • A new method is proposed to address the heterogeneity challenge. • Comparison with measurements shows accurate forecasts of the model. • The first physical–statistical/heterogeneous building energy modeling approach is proposed and validated. - Abstract: Energy consumption forecasting is a critical and necessary input to planning and controlling energy usage in the building sector which accounts for 40% of the world’s energy use and the world’s greatest fraction of greenhouse gas emissions. However, due to the diversity and complexity of buildings as well as the random nature of weather conditions, energy consumption and loads are stochastic and difficult to predict. This paper presents a new methodology for energy demand forecasting that addresses the heterogeneity challenges in energy modeling of buildings. The new method is based on a physical–statistical approach designed to account for building heterogeneity to improve forecast accuracy. The physical model provides a theoretical input to characterize the underlying physical mechanism of energy flows. Then stochastic parameters are introduced into the physical model and the statistical time series model is formulated to reflect model uncertainties and individual heterogeneity in buildings. A new method of model generalization based on a convex hull technique is further derived to parameterize the individual-level model parameters for consistent model coefficients while maintaining satisfactory modeling accuracy for heterogeneous buildings. The proposed method and its validation are presented in detail for four different sports buildings with field measurements. The results show that the proposed methodology and model can provide a considerable improvement in forecasting accuracy

  10. Likert scales, levels of measurement and the "laws" of statistics.

    Science.gov (United States)

    Norman, Geoff

    2010-12-01

    Reviewers of research reports frequently criticize the choice of statistical methods. While some of these criticisms are well-founded, frequently the use of various parametric methods such as analysis of variance, regression, correlation are faulted because: (a) the sample size is too small, (b) the data may not be normally distributed, or (c) The data are from Likert scales, which are ordinal, so parametric statistics cannot be used. In this paper, I dissect these arguments, and show that many studies, dating back to the 1930s consistently show that parametric statistics are robust with respect to violations of these assumptions. Hence, challenges like those above are unfounded, and parametric methods can be utilized without concern for "getting the wrong answer".

  11. Statistical cluster analysis and diagnosis of nuclear system level performance

    International Nuclear Information System (INIS)

    Teichmann, T.; Levine, M.M.; Samanta, P.K.; Kato, W.Y.

    1985-01-01

    The complexity of individual nuclear power plants and the importance of maintaining reliable and safe operations makes it desirable to complement the deterministic analyses of these plants by corresponding statistical surveys and diagnoses. Based on such investigations, one can then explore, statistically, the anticipation, prevention, and when necessary, the control of such failures and malfunctions. This paper, and the accompanying one by Samanta et al., describe some of the initial steps in exploring the feasibility of setting up such a program on an integrated and global (industry-wide) basis. The conceptual statistical and data framework was originally outlined in BNL/NUREG-51609, NUREG/CR-3026, and the present work aims at showing how some important elements might be implemented in a practical way (albeit using hypothetical or simulated data)

  12. Oil and gas journal energy database's energy statistics sourcebook, 5th edition

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    The book is a library of energy industry data in a single volume. It's the fastest way to get the information you need to analyze your market, make intelligent and informed decisions, develop various economic scenarios and prepare crucial business plans. And it's researched by energy professionals who know how to save you time and money. International, national and state statistics in monthly and/or annual formats are detailed. Current through 1989, most tables show from 15 to 50 years of data. Key statistical indicators for analyzing energy industry trends have been compiled by industry divisions such as: Exploration and drilling, production, reserves, refining, stocks, demands/consumption, imports and exports, energy, financial, offshore and transportation

  13. Statistical-QoS Guaranteed Energy Efficiency Optimization for Energy Harvesting Wireless Sensor Networks.

    Science.gov (United States)

    Gao, Ya; Cheng, Wenchi; Zhang, Hailin

    2017-08-23

    Energy harvesting, which offers a never-ending energy supply, has emerged as a prominent technology to prolong the lifetime and reduce costs for the battery-powered wireless sensor networks. However, how to improve the energy efficiency while guaranteeing the quality of service (QoS) for energy harvesting based wireless sensor networks is still an open problem. In this paper, we develop statistical delay-bounded QoS-driven power control policies to maximize the effective energy efficiency (EEE), which is defined as the spectrum efficiency under given specified QoS constraints per unit harvested energy, for energy harvesting based wireless sensor networks. For the battery-infinite wireless sensor networks, our developed QoS-driven power control policy converges to the Energy harvesting Water Filling (E-WF) scheme and the Energy harvesting Channel Inversion (E-CI) scheme under the very loose and stringent QoS constraints, respectively. For the battery-finite wireless sensor networks, our developed QoS-driven power control policy becomes the Truncated energy harvesting Water Filling (T-WF) scheme and the Truncated energy harvesting Channel Inversion (T-CI) scheme under the very loose and stringent QoS constraints, respectively. Furthermore, we evaluate the outage probabilities to theoretically analyze the performance of our developed QoS-driven power control policies. The obtained numerical results validate our analysis and show that our developed optimal power control policies can optimize the EEE over energy harvesting based wireless sensor networks.

  14. Energy Levels of Hydrogen and Deuterium

    Science.gov (United States)

    SRD 142 NIST Energy Levels of Hydrogen and Deuterium (Web, free access)   This database provides theoretical values of energy levels of hydrogen and deuterium for principle quantum numbers n = 1 to 200 and all allowed orbital angular momenta l and total angular momenta j. The values are based on current knowledge of the revelant theoretical contributions including relativistic, quantum electrodynamic, recoil, and nuclear size effects.

  15. Level set segmentation of medical images based on local region statistics and maximum a posteriori probability.

    Science.gov (United States)

    Cui, Wenchao; Wang, Yi; Lei, Tao; Fan, Yangyu; Feng, Yan

    2013-01-01

    This paper presents a variational level set method for simultaneous segmentation and bias field estimation of medical images with intensity inhomogeneity. In our model, the statistics of image intensities belonging to each different tissue in local regions are characterized by Gaussian distributions with different means and variances. According to maximum a posteriori probability (MAP) and Bayes' rule, we first derive a local objective function for image intensities in a neighborhood around each pixel. Then this local objective function is integrated with respect to the neighborhood center over the entire image domain to give a global criterion. In level set framework, this global criterion defines an energy in terms of the level set functions that represent a partition of the image domain and a bias field that accounts for the intensity inhomogeneity of the image. Therefore, image segmentation and bias field estimation are simultaneously achieved via a level set evolution process. Experimental results for synthetic and real images show desirable performances of our method.

  16. A review of Ghana’s energy sector national energy statistics and policy framework

    Directory of Open Access Journals (Sweden)

    Samuel Asumadu-Sarkodie

    2016-12-01

    Full Text Available In this study, a review of Ghana’s energy sector national energy statistics and policy framework is done to create awareness of the strategic planning and energy policies of Ghana’s energy sector that will serve as an informative tool for both local and foreign investors, help in national decision-making for the efficient development and utilization of energy resources. The review of Ghana’s energy sector policy is to answer the question, what has been done so far? And what is the way forward? The future research in Ghana cannot progress without consulting the past. In order to ensure access to affordable, reliable, sustainable, and modern energy for all, Ghana has begun expanding her economy with the growing Ghanaian population as a way to meet the SDG (1, which seeks to end poverty and improve well-being. There are a number of intervention strategies by Ghana’s Energy sector which provides new, high-quality, and cost-competitive energy services to poor people and communities, thus alleviating poverty. Ghana’s Energy sector has initiated the National Electrification Scheme, a Self-Help Electrification Program, a National Off-grid Rural Electrification Program, and a Renewable Energy Development Program (REDP. The REDP aims to: assess the availability of renewable energy resources, examine the technical feasibility and cost-effectiveness of promising renewable energy technologies, ensure the efficient production and use of the Ghana’s renewable energy resources, and develop an information base that facilitates the establishment of a planning framework for the rational development and the use of the Ghana’s renewable energy resources.

  17. Statistics

    CERN Document Server

    Hayslett, H T

    1991-01-01

    Statistics covers the basic principles of Statistics. The book starts by tackling the importance and the two kinds of statistics; the presentation of sample data; the definition, illustration and explanation of several measures of location; and the measures of variation. The text then discusses elementary probability, the normal distribution and the normal approximation to the binomial. Testing of statistical hypotheses and tests of hypotheses about the theoretical proportion of successes in a binomial population and about the theoretical mean of a normal population are explained. The text the

  18. Research on statistical methodology to investigate energy consumption in public buildings sector in China

    International Nuclear Information System (INIS)

    Chen Shuqin; Li Nianping; Guan Jun

    2008-01-01

    The purpose of this research is to find a statistical methodology to investigate the national energy consumption in the public buildings sector in China, in order to look into the actuality of the national energy consumption of public buildings and to provide abundant data for building energy efficiency work. The frame of a national statistical system of energy consumption for public buildings is presented in this paper. The statistical index system of energy consumption is constituted, which refers to the general characteristics of public buildings, their possession and utilization of energy consumption equipment and their energy consumption quantities. Sequentially, a set of statistical report forms is designed to investigate the energy consumption of cities, provinces and the country, respectively. On this base, the above statistical methodology is used to gather statistics of a public building for annual energy consumption

  19. Revised energy levels of singly ionized lanthanum

    Science.gov (United States)

    Güzelçimen, Feyza; Tonka, Mehdi; Uddin, Zaheer; Bhatti, Naveed Anjum; Windholz, Laurentius; Kröger, Sophie; Başar, Gönül

    2018-05-01

    Based on the experimental wavenumbers of 344 spectral lines from calibrated Fourier transform (FT) spectra as well as wavenumbers of 81 lines from the wavelength tables from literature, the energy of 115 fine structure levels of singly ionized lanthanum has been revised by weighted global fits. The classifications of the lines are provided by numerous previous investigations of lanthanum by different spectroscopic methods and authors. For the high accurate determination of the center of gravity wavenumbers from the experimental spectrum, the hyperfine constants of the involved levels have been taken into account, if possible. For the 94 levels with known hyperfine constants the accuracy of energy values is better than 0.01 cm-1. For 34 levels the magnetic dipole hyperfine constants A have been determined from FT spectra as part of this work. For four of these 34 levels even electric quadrupole hyperfine constants B could be estimated. For levels, which have experimentally unknown hyperfine constants and which are connected only by lines not found in the FT spectra but taken from literature, the uncertainties of energy values are about a factor of 10 higher. A list of all revised level energies together with a compilation of hyperfine structure data is given as well as a list of all lines used.

  20. Analysis of Norwegian bio energy statistics. Quality improvement proposals; Analyse av norsk bioenergistatistikk. Forslag til kvalitetsheving

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    This report is an assessment of the current model and presentation form of bio energy statistics. It appears proposed revision and enhancement of both collection and data representation. In the context of market development both in general for energy and particularly for bio energy and government targets, a good bio energy statistics form the basis to follow up the objectives and means.(eb)

  1. Using the Δ3 statistic to test for missed levels in mixed sequence neutron resonance data

    International Nuclear Information System (INIS)

    Mulhall, Declan

    2009-01-01

    The Δ 3 (L) statistic is studied as a tool to detect missing levels in the neutron resonance data where two sequences are present. These systems are problematic because there is no level repulsion, and the resonances can be too close to resolve. Δ 3 (L) is a measure of the fluctuations in the number of levels in an interval of length L on the energy axis. The method used is tested on ensembles of mixed Gaussian orthogonal ensemble spectra, with a known fraction of levels (x%) randomly depleted, and can accurately return x. The accuracy of the method as a function of spectrum size is established. The method is used on neutron resonance data for 11 isotopes with either s-wave neutrons on odd-A isotopes, or p-wave neutrons on even-A isotopes. The method compares favorably with a maximum likelihood method applied to the level spacing distribution. Nuclear data ensembles were made from 20 isotopes in total, and their Δ 3 (L) statistics are discussed in the context of random matrix theory.

  2. New statistical potential for quality assessment of protein models and a survey of energy functions

    Directory of Open Access Journals (Sweden)

    Rykunov Dmitry

    2010-03-01

    Full Text Available Abstract Background Scoring functions, such as molecular mechanic forcefields and statistical potentials are fundamentally important tools in protein structure modeling and quality assessment. Results The performances of a number of publicly available scoring functions are compared with a statistical rigor, with an emphasis on knowledge-based potentials. We explored the effect on accuracy of alternative choices for representing interaction center types and other features of scoring functions, such as using information on solvent accessibility, on torsion angles, accounting for secondary structure preferences and side chain orientation. Partially based on the observations made, we present a novel residue based statistical potential, which employs a shuffled reference state definition and takes into account the mutual orientation of residue side chains. Atom- and residue-level statistical potentials and Linux executables to calculate the energy of a given protein proposed in this work can be downloaded from http://www.fiserlab.org/potentials. Conclusions Among the most influential terms we observed a critical role of a proper reference state definition and the benefits of including information about the microenvironment of interaction centers. Molecular mechanical potentials were also tested and found to be over-sensitive to small local imperfections in a structure, requiring unfeasible long energy relaxation before energy scores started to correlate with model quality.

  3. The building network energy statistics 2002[Norway]; Bygningsnettverkets energistatistikk 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    The report surveys a Norwegian network within the construction business and the energy utilization particularly in various buildings. There are sections on the network structure, the energy use in 2002, the building aspects and various project types. The emphasis is on energy conservation aspects. Various technologies and energy systems as well as building types, are discussed. (tk)

  4. IGESS: a statistical approach to integrating individual-level genotype data and summary statistics in genome-wide association studies.

    Science.gov (United States)

    Dai, Mingwei; Ming, Jingsi; Cai, Mingxuan; Liu, Jin; Yang, Can; Wan, Xiang; Xu, Zongben

    2017-09-15

    Results from genome-wide association studies (GWAS) suggest that a complex phenotype is often affected by many variants with small effects, known as 'polygenicity'. Tens of thousands of samples are often required to ensure statistical power of identifying these variants with small effects. However, it is often the case that a research group can only get approval for the access to individual-level genotype data with a limited sample size (e.g. a few hundreds or thousands). Meanwhile, summary statistics generated using single-variant-based analysis are becoming publicly available. The sample sizes associated with the summary statistics datasets are usually quite large. How to make the most efficient use of existing abundant data resources largely remains an open question. In this study, we propose a statistical approach, IGESS, to increasing statistical power of identifying risk variants and improving accuracy of risk prediction by i ntegrating individual level ge notype data and s ummary s tatistics. An efficient algorithm based on variational inference is developed to handle the genome-wide analysis. Through comprehensive simulation studies, we demonstrated the advantages of IGESS over the methods which take either individual-level data or summary statistics data as input. We applied IGESS to perform integrative analysis of Crohns Disease from WTCCC and summary statistics from other studies. IGESS was able to significantly increase the statistical power of identifying risk variants and improve the risk prediction accuracy from 63.2% ( ±0.4% ) to 69.4% ( ±0.1% ) using about 240 000 variants. The IGESS software is available at https://github.com/daviddaigithub/IGESS . zbxu@xjtu.edu.cn or xwan@comp.hkbu.edu.hk or eeyang@hkbu.edu.hk. Supplementary data are available at Bioinformatics online. © The Author (2017). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com

  5. Statistical models to predict flows at monthly level in Salvajina

    International Nuclear Information System (INIS)

    Gonzalez, Harold O

    1994-01-01

    It thinks about and models of lineal regression evaluate at monthly level that they allow to predict flows in Salvajina, with base in predictions variable, like the difference of pressure between Darwin and Tahiti, precipitation in Piendamo Cauca), temperature in Port Chicama (Peru) and pressure in Tahiti

  6. Statistics

    Science.gov (United States)

    Links to sources of cancer-related statistics, including the Surveillance, Epidemiology and End Results (SEER) Program, SEER-Medicare datasets, cancer survivor prevalence data, and the Cancer Trends Progress Report.

  7. Occupation number dependence of molecular energy levels

    International Nuclear Information System (INIS)

    Giambiagi, M.S. de; Giambiagi, M.; Ferreira, R.

    1977-08-01

    The Roothaan expression for the energy of a closed-shell molecular system is generalized in order to apply to open shells. A continuous variation from 0 to 2 is supposed for each level's occupation number, extending to this range tbe correction due to the spurious repulsion appearing in the half-electron method. The characteristic equations of the Xα method are applied to the energy expressions. The one level case is discussed in detail. Ionic and excited states of the 1,3 transbutadiene π system are analyzed

  8. Statistical modelling of monthly mean sea level at coastal tide gauge stations along the Indian subcontinent

    Digital Repository Service at National Institute of Oceanography (India)

    Srinivas, K.; Das, V.K.; DineshKumar, P.K.

    This study investigates the suitability of statistical models for their predictive potential for the monthly mean sea level at different stations along the west and east coasts of the Indian subcontinent. Statistical modelling of the monthly mean...

  9. Distribution-level electricity reliability: Temporal trends using statistical analysis

    International Nuclear Information System (INIS)

    Eto, Joseph H.; LaCommare, Kristina H.; Larsen, Peter; Todd, Annika; Fisher, Emily

    2012-01-01

    This paper helps to address the lack of comprehensive, national-scale information on the reliability of the U.S. electric power system by assessing trends in U.S. electricity reliability based on the information reported by the electric utilities on power interruptions experienced by their customers. The research analyzes up to 10 years of electricity reliability information collected from 155 U.S. electric utilities, which together account for roughly 50% of total U.S. electricity sales. We find that reported annual average duration and annual average frequency of power interruptions have been increasing over time at a rate of approximately 2% annually. We find that, independent of this trend, installation or upgrade of an automated outage management system is correlated with an increase in the reported annual average duration of power interruptions. We also find that reliance on IEEE Standard 1366-2003 is correlated with higher reported reliability compared to reported reliability not using the IEEE standard. However, we caution that we cannot attribute reliance on the IEEE standard as having caused or led to higher reported reliability because we could not separate the effect of reliance on the IEEE standard from other utility-specific factors that may be correlated with reliance on the IEEE standard. - Highlights: ► We assess trends in electricity reliability based on the information reported by the electric utilities. ► We use rigorous statistical techniques to account for utility-specific differences. ► We find modest declines in reliability analyzing interruption duration and frequency experienced by utility customers. ► Installation or upgrade of an OMS is correlated to an increase in reported duration of power interruptions. ► We find reliance in IEEE Standard 1366 is correlated with higher reported reliability.

  10. Impurity energy level in the Haldane gap

    International Nuclear Information System (INIS)

    Wang Wei; Lu Yu

    1995-11-01

    An impurity bond J' in a periodic 1D antiferromagnetic spin 1 chain with exchange J is considered. Using the numerical density matrix renormalization group method, we find an impurity energy level in the Haldane gap, corresponding to a bound state near the impurity bond. When J' J. The impurity level appears only when the deviation dev = (J'- J)/J' is greater than B c , which is close to 0.3 in our calculation. (author). 15 refs, 4 figs

  11. Lombardy (Italy) regional energy balance: 1984-1990 statistical data

    International Nuclear Information System (INIS)

    Berra, P.; Di Marzio, T.

    1992-01-01

    After a brief explanation of the scope and key econometric elements of the energy balance analysis, this paper tables energy supply and demand data for Italy's Lombardy Region. The primary and secondary energy data are expressed in metric quantities and in equivalent calorific values and are sub-divided according to type of energy source and consuming sector. Assessments are made of the degree of reliability of the information and sources of information

  12. On expectation values for nuclear energy levels

    International Nuclear Information System (INIS)

    De Wet, J.A.

    1978-01-01

    The nuclear model is built up by constructing measured states, including the ground state, from the vacuum state. All states are, however, not accessible from the ground state so that selection rules may be found which at the same time impose even more stringent conditions on the labelling of energy levels. These are the subject of this paper

  13. Spectrum and energy levels of Y VI

    International Nuclear Information System (INIS)

    Persson, W.; Reader, J.

    1986-01-01

    The spectrum of the five-times-ionized yttrium atom (Y VI), excited in a sliding-spark discharge, was studied in the 160--2500 A-circle range. About 900 Y VI lines were classified as transitions between 101 odd and 69 even energy levels.The energy-level system established includes almost all levels of the 4s 2 4p 4 , 4s4p 5 , 4s 2 4p 3 4d, 5d, 5s, 6s, and 5p configurations and a number of levels of the 7s, 4f, and 4s4p 4 4d configurations. The observed level system has been theoretically interpreted by means of Hartree--Fock calculations and least-squares parametric fits. Strong configuration mixings are found between the 4s4p 5 and 4s 2 4p 3 4d configurations, between the 4s 2 4p 3 5p and 4s4p 4 4d configurations, and between the 4s 2 4p 3 4f and 4s4p 4 4d configurations. From the optimized energy-level values, a system of Ritz-type wavelength standards with accuracies varying from 0.0003 to 0.003 A-circle in the range 179--500 A-circle has been determined. The ionization energy as determined from 4s 2 4p 3 ns levels (n = 5-7) is 737 110 +- 200 cm/sup -1/ (91.390 +- 0.025 eV)

  14. Frontiers of controlling energy levels at interfaces

    Science.gov (United States)

    Koch, Norbert

    The alignment of electron energy levels at interfaces between semiconductors, dielectrics, and electrodes determines the function and efficiency of all electronic and optoelectronic devices. Reliable guidelines for predicting the level alignment for a given material combination and methods to adjust the intrinsic energy landscape are needed to enable efficient engineering approaches. These are sufficiently understood for established electronic materials, e.g., Si, but for the increasing number of emerging materials, e.g., organic and 2D semiconductors, perovskites, this is work in progress. The intrinsic level alignment and the underlying mechanisms at interfaces between organic and inorganic semiconductors are discussed first. Next, methods to alter the level alignment are introduced, which all base on proper charge density rearrangement at a heterojunction. As interface modification agents we use molecular electron acceptors and donors, as well as molecular photochromic switches that add a dynamic aspect and allow device multifunctionality. For 2D semiconductors surface transfer doping with molecular acceptors/donors transpires as viable method to locally tune the Fermi-level position in the energy gap. The fundamental electronic properties of a prototypical 1D interface between intrinsic and p-doped 2D semiconductor regions are derived from local (scanning probe) and area-averaged (photoemission) spectroscopy experiments. Future research opportunities for attaining unsurpassed interface control through charge density management are discussed.

  15. Citizen awareness level of the peaceful uses of atomic energy

    International Nuclear Information System (INIS)

    Elfawairs, Kh.; Elammari, M.

    2015-01-01

    This paper aims to know the level of public awareness of different types of people, about the peaceful application of nuclear energy. A questionnaire about this subject was distributed randomly in different cities in Libya; the questionnaire was targeting males and females with different educational levels. From data obtained and which was analyzed statistically comparing the educational level with the level of awareness. It was found that the highest contribution was for those holding university degrees 43%. Data analysis showed that 50.5% of the total number do not know what is meant by the peaceful uses of atomic energy and this significantly related to the educational level at significance level ∝=0.01. Concerning the assessment of environmental awareness of the Libyan citizens, 83.3% said that it is weak and the relation is not signification. Concerning the best ways of making people more aware of atomic energy and its peaceful uses 63.9% said all possible means should be used and 21.3% said practical application is the best way, where 13.9% said that they don't know. About the uses of nuclear technology in different fields, the participants had different views. From this study it was concluded that a%. Warnaco programs concerning the peaceful uses of atomic energy should be intensified.(author)

  16. Statistical data on energy. France; Statistiques energetiques. France

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-05-01

    This document summarizes in a series of tables the energy status of France for the year 2001: supplies, consumption and uses, national production, evolution per energy source and per sector of the national production and consumption since 1973, general indicators (evolution of the energy bill, prices, energy independence and gross internal product since 1973), projections. Details about the resources, uses and prices are given separately for petroleum, natural gas, electricity and solid mineral fuels and compared with the average data of the European Union. (J.S.)

  17. China's energy statistics in a global context: A methodology to develop regional energy balances for East, Central and West China

    DEFF Research Database (Denmark)

    Mischke, Peggy

    2013-01-01

    for research and policy analysis. An improved understanding of the quality and reliability of Chinese economic and energy data is becoming more important to to understanding global energy markets and future greenhouse gas emissions. China’s national statistical system to track such changes is however still...... developing and, in some instances, energy data remain unavailable in the public domain. This working paper discusses China’s energy and economic statistics in view of identifying suitable indicators to develop a simplified regional energy systems for China from a variety of publicly available data. As China......’s national statistical system continuous to be debated and criticised in terms of data quality, comparability and reliability, an overview of the milestones, status and main issues of China’s energy statistics is given. In a next step, the energy balance format of the International Energy Agency is used...

  18. Statistical error of spin transfer to hyperon at RHIC energy

    International Nuclear Information System (INIS)

    Han Ran; Mao Yajun

    2009-01-01

    From the RHIC/PHENIX experiment data, it is found that the statistical error of spin transfer is few times larger than the statistical error of the single spin asymmetry. In order to verify the difference between σDLL and σAL, the linear least squares method was used to check it first, and then a simple Monte-Carlo simulation to test this factor again. The simulation is consistent with the calculation result which indicates that the few times difference is reasonable. (authors)

  19. Statistical properties of proportional residual energy intake as a new measure of energetic efficiency.

    Science.gov (United States)

    Zamani, Pouya

    2017-08-01

    Traditional ratio measures of efficiency, including feed conversion ratio (FCR), gross milk efficiency (GME), gross energy efficiency (GEE) and net energy efficiency (NEE) may have some statistical problems including high correlations with milk yield. Residual energy intake (REI) or residual feed intake (RFI) is another criterion, proposed to overcome the problems attributed to the traditional ratio criteria, but it does not account for production or intake levels. For example, the same REI value could be considerable for low producing and negligible for high producing cows. The aim of this study was to propose a new measure of efficiency to overcome the problems attributed to the previous criteria. A total of 1478 monthly records of 268 lactating Holstein cows were used for this study. In addition to FCR, GME, GEE, NEE and REI, a new criterion called proportional residual energy intake (PREI) was calculated as REI to net energy intake ratio and defined as proportion of net energy intake lost as REI. The PREI had an average of -0·02 and range of -0·36 to 0·27, meaning that the least efficient cow lost 0·27 of her net energy intake as REI, while the most efficient animal saved 0·36 of her net energy intake as less REI. Traditional ratio criteria (FCR, GME, GEE and NEE) had high correlations with milk and fat corrected milk yields (absolute values from 0·469 to 0·816), while the REI and PREI had low correlations (0·000 to 0·069) with milk production. The results showed that the traditional ratio criteria (FCR, GME, GEE and NEE) are highly influenced by production traits, while the REI and PREI are independent of production level. Moreover, the PREI adjusts the REI magnitude for intake level. It seems that the PREI could be considered as a worthwhile measure of efficiency for future studies.

  20. Energy demand forecasting method based on international statistical data

    International Nuclear Information System (INIS)

    Glanc, Z.; Kerner, A.

    1997-01-01

    Poland is in a transition phase from a centrally planned to a market economy; data collected under former economic conditions do not reflect a market economy. Final energy demand forecasts are based on the assumption that the economic transformation in Poland will gradually lead the Polish economy, technologies and modes of energy use, to the same conditions as mature market economy countries. The starting point has a significant influence on the future energy demand and supply structure: final energy consumption per capita in 1992 was almost half the average of OECD countries; energy intensity, based on Purchasing Power Parities (PPP) and referred to GDP, is more than 3 times higher in Poland. A method of final energy demand forecasting based on regression analysis is described in this paper. The input data are: output of macroeconomic and population growth forecast; time series 1970-1992 of OECD countries concerning both macroeconomic characteristics and energy consumption; and energy balance of Poland for the base year of the forecast horizon. (author). 1 ref., 19 figs, 4 tabs

  1. Energy demand forecasting method based on international statistical data

    Energy Technology Data Exchange (ETDEWEB)

    Glanc, Z; Kerner, A [Energy Information Centre, Warsaw (Poland)

    1997-09-01

    Poland is in a transition phase from a centrally planned to a market economy; data collected under former economic conditions do not reflect a market economy. Final energy demand forecasts are based on the assumption that the economic transformation in Poland will gradually lead the Polish economy, technologies and modes of energy use, to the same conditions as mature market economy countries. The starting point has a significant influence on the future energy demand and supply structure: final energy consumption per capita in 1992 was almost half the average of OECD countries; energy intensity, based on Purchasing Power Parities (PPP) and referred to GDP, is more than 3 times higher in Poland. A method of final energy demand forecasting based on regression analysis is described in this paper. The input data are: output of macroeconomic and population growth forecast; time series 1970-1992 of OECD countries concerning both macroeconomic characteristics and energy consumption; and energy balance of Poland for the base year of the forecast horizon. (author). 1 ref., 19 figs, 4 tabs.

  2. Energy statistical data (overseas). 1995 issue; Energy tokei shiryo (kaigaihen). 1995 nen ban

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-10

    The energy statistical data (a 1995 overseas issue) were made public by the Energy Metrics Analysis Center, the Institute of Energy Economics. As for energy in general, described are the reserve/existing amount, a change of the production amount, the consumption amount of primary energy in the world, etc. As to oil, natural gas and coal, stated were the confirmed reserve, a change of the production amount, a change of the consumption amount, world import/export flows, etc. Concerning electric power, the paper deals with a change of the amount of electric power consumption in the world, constitution of the power generation amount by power source, a change of power generation capability, changes of capabilities of thermal, hydroelectric, and nuclear power, etc. With regard to data by country, a lot of data are included on the U.S., Canada, England, France, Germany, Italy, Australia, Russian Federation, and China. The paper also describes situations in OPEC countries, changes of the situation of Majors, and prices of crude oil, petroleum products, coal, natural gas and LPG, and electric power, etc.

  3. On Low Energy Levels in 185W

    International Nuclear Information System (INIS)

    Malmskog, S.G.; Hoejeberg, M.; Berg, V.

    1969-02-01

    Gamma ray spectra in the decay of 185 Ta and 185m W have been studied with Ge (Li) detectors. The 185m W isomeric transition at 131.6 keV is shown to be of E3 multipolarity. A level scheme of 185 W is proposed with the following energy levels (energies in keV, spin and K quantum numbers in brackets): 0 (3/2 - 3/2), 23.5 (1/2 - 1/2), 65.9 (5/2 - 3/2), 93.5 (3/2 - 1/2) (uncertain), 173.9 (7/2 - 3/2), 188.1 (5/2 - 1/2), 197.5 (11/2 + 11/2) , 243.5 (7/2 - 7/2), and 390.8 (9/2 - 7/2)

  4. Comparison of energy performance requirements levels

    DEFF Research Database (Denmark)

    Spiekman, Marleen; Thomsen, Kirsten Engelund; Rose, Jørgen

    This summary report provides a synthesis of the work within the EU SAVE project ASIEPI on developing a method to compare the energy performance (EP) requirement levels among the countries of Europe. Comparing EP requirement levels constitutes a major challenge. From the comparison of for instance...... the present Dutch requirement level (EPC) of 0,8 with the present Flemish level of E80, it can easily be seen that direct comparison is not possible. The conclusions and recommendations of the study are presented in part A. These constitute the most important result of the project. Part B gives an overview...... of all other project material related to that topic, which allows to easily identify the most pertinent information. Part C lists the project partners and sponsors....

  5. Energy statistics of OECD countries 1993-1994

    International Nuclear Information System (INIS)

    1996-01-01

    This work contains a compilation of energy supply and consumption data in original units for coal, oil, gas, electricity, heat, renewable combustible and waste. Historical tables summarize data on production, trade and final consumption of hard coal, brown coal, oil, natural gas and electricity. Each issue includes definitions of products and flows and explanatory notes on the individual country data. The data contained in this publication are presented in comprehensive energy balances expressed in million tonnes of oil equivalent in Energy Balances of OECD Countries, 1993-1994, the sister volume of this publication. (authors). figs., tabs

  6. Power flow as a complement to statistical energy analysis and finite element analysis

    Science.gov (United States)

    Cuschieri, J. M.

    1987-01-01

    Present methods of analysis of the structural response and the structure-borne transmission of vibrational energy use either finite element (FE) techniques or statistical energy analysis (SEA) methods. The FE methods are a very useful tool at low frequencies where the number of resonances involved in the analysis is rather small. On the other hand SEA methods can predict with acceptable accuracy the response and energy transmission between coupled structures at relatively high frequencies where the structural modal density is high and a statistical approach is the appropriate solution. In the mid-frequency range, a relatively large number of resonances exist which make finite element method too costly. On the other hand SEA methods can only predict an average level form. In this mid-frequency range a possible alternative is to use power flow techniques, where the input and flow of vibrational energy to excited and coupled structural components can be expressed in terms of input and transfer mobilities. This power flow technique can be extended from low to high frequencies and this can be integrated with established FE models at low frequencies and SEA models at high frequencies to form a verification of the method. This method of structural analysis using power flo and mobility methods, and its integration with SEA and FE analysis is applied to the case of two thin beams joined together at right angles.

  7. Data analysis in high energy physics. A practical guide to statistical methods

    International Nuclear Information System (INIS)

    Behnke, Olaf; Schoerner-Sadenius, Thomas; Kroeninger, Kevin; Schott, Gregory

    2013-01-01

    This practical guide covers the essential tasks in statistical data analysis encountered in high energy physics and provides comprehensive advice for typical questions and problems. The basic methods for inferring results from data are presented as well as tools for advanced tasks such as improving the signal-to-background ratio, correcting detector effects, determining systematics and many others. Concrete applications are discussed in analysis walkthroughs. Each chapter is supplemented by numerous examples and exercises and by a list of literature and relevant links. The book targets a broad readership at all career levels - from students to senior researchers.

  8. Prediction of noise in ships by the application of “statistical energy analysis.”

    DEFF Research Database (Denmark)

    Jensen, John Ødegaard

    1979-01-01

    If it will be possible effectively to reduce the noise level in the accomodation on board ships, by introducing appropriate noise abatement measures already at an early design stage, it is quite essential that sufficiently accurate prediction methods are available for the naval architects...... or for a special noise abatement measure, e.g., increased structural damping. The paper discusses whether it might be possible to derive an alternative calculation model based on the “statistical energy analysis” approach (SEA). By considering the hull of a ship to be constructed from plate elements connected...

  9. The energy world in 2002. Statistical yearbook ENERDATA 2003

    International Nuclear Information System (INIS)

    2003-01-01

    This document summarizes the world energy key data for 2002 (total energy consumption and per gross domestic product unit, petroleum, gas, coal and lignite, and electric power consumptions, CO 2 emissions). Data are grouped according to five main areas (Africa and Middle East, America, Asia and Pacific area, Western Europe, Eastern Europe and ex-USSR). The data show a restart of the world energy consumption (1.4% in 2002 with respect to 0.5% in 2001) despite a relatively low economic growth (1.6% with respect to 2.6% for the previous decade, as an average), a strong growth of the electricity and coal consumption, a restart of the gas consumption and a stagnation of the petroleum consumption. (J.S.)

  10. Energy statistics of OECD countries 1992-1993

    International Nuclear Information System (INIS)

    1995-01-01

    Contains a compilation of energy supply and consumption data in original units for coal, oil, gas, electricity, heat, combustible renewables and waste. Historical tables summarize data on production, trade and final consumption of hard coal, brown coal, oil, natural gas and electricity. Each issue includes definitions of products and flows and explanatory notes on the individual country data. (authors). 242 tabs

  11. Energy level diagrams for black hole orbits

    Science.gov (United States)

    Levin, Janna

    2009-12-01

    A spinning black hole with a much smaller black hole companion forms a fundamental gravitational system, like a colossal classical analog to an atom. In an appealing if imperfect analogy with atomic physics, this gravitational atom can be understood through a discrete spectrum of periodic orbits. Exploiting a correspondence between the set of periodic orbits and the set of rational numbers, we are able to construct periodic tables of orbits and energy level diagrams of the accessible states around black holes. We also present a closed-form expression for the rational q, thereby quantifying zoom-whirl behavior in terms of spin, energy and angular momentum. The black hole atom is not just a theoretical construct, but corresponds to extant astrophysical systems detectable by future gravitational wave observatories.

  12. Energy level diagrams for black hole orbits

    International Nuclear Information System (INIS)

    Levin, Janna

    2009-01-01

    A spinning black hole with a much smaller black hole companion forms a fundamental gravitational system, like a colossal classical analog to an atom. In an appealing if imperfect analogy with atomic physics, this gravitational atom can be understood through a discrete spectrum of periodic orbits. Exploiting a correspondence between the set of periodic orbits and the set of rational numbers, we are able to construct periodic tables of orbits and energy level diagrams of the accessible states around black holes. We also present a closed-form expression for the rational q, thereby quantifying zoom-whirl behavior in terms of spin, energy and angular momentum. The black hole atom is not just a theoretical construct, but corresponds to extant astrophysical systems detectable by future gravitational wave observatories.

  13. Energy statistics of OECD countries 1991-1992

    International Nuclear Information System (INIS)

    1994-01-01

    Contains a compilation of energy supply and consumption data in original units for coal, oil gas and electricity. Historical tables summarize data on production, trade and final consumption of hard coal, brown coal, oil, natural gas and electricity. Production is shown for 'other solid fuels' such as wood and waste, as well as for heat. Each issue includes definitions of products and flows and explanatory notes on the individual country data. (author)

  14. Energy statistics for non-residential premises in 2001

    International Nuclear Information System (INIS)

    2002-01-01

    The dominating heating system in premises is district heating, 56 per cent of the surface area is heated that way. Oil is used for heating in 9 per cent of the surface area and about the same area is heated by electricity only. The total surface area for premises is about 138 million square metres in 2001. Since the beginning of the 1980s the surface area of offices has been increasing and is now about 33 million square metres. As an average the energy use is: 15.5 litres of oil/m 2 ; 139 kWh/m 2 district heating; 148 kWh/m 2 electricity. All together the use is: 309,000 m 3 oil, 12.4 TWh district heating; 3.5 TWh electricity; 0.5 TWh natural gas/gaswork gas; 0.4 TWh o ther furnace ; 0.4 TWh biofuel or peat. This survey covers non-residential premises in Sweden. It is based on a sample of 8228 properties built before 2001 and on a total survey of properties owned by some of the major owners in the country (about 1700 properties). The survey was carried out in February 2002 as a mail survey. The property owners were asked to give information about type of premises, type of heating system, deliveries of energy for heating, etc. The presentation gives data on deliveries of energy, heated surface area, average consumption, etc., for the total population and for various subdivisions

  15. Statistical distribution of components of energy eigenfunctions: from nearly-integrable to chaotic

    International Nuclear Information System (INIS)

    Wang, Jiaozi; Wang, Wen-ge

    2016-01-01

    We study the statistical distribution of components in the non-perturbative parts of energy eigenfunctions (EFs), in which main bodies of the EFs lie. Our numerical simulations in five models show that deviation of the distribution from the prediction of random matrix theory (RMT) is useful in characterizing the process from nearly-integrable to chaotic, in a way somewhat similar to the nearest-level-spacing distribution. But, the statistics of EFs reveals some more properties, as described below. (i) In the process of approaching quantum chaos, the distribution of components shows a delay feature compared with the nearest-level-spacing distribution in most of the models studied. (ii) In the quantum chaotic regime, the distribution of components always shows small but notable deviation from the prediction of RMT in models possessing classical counterparts, while, the deviation can be almost negligible in models not possessing classical counterparts. (iii) In models whose Hamiltonian matrices possess a clear band structure, tails of EFs show statistical behaviors obviously different from those in the main bodies, while, the difference is smaller for Hamiltonian matrices without a clear band structure.

  16. High statistics inclusive phi-meson production at SPS energies

    International Nuclear Information System (INIS)

    Dijkstra, H.B.

    1985-01-01

    This thesis describes an experiment studying the inclusive reaction hadron + Be → phi + anything → K + + K - + anything in 100 GeV/c, 120 GeV/c and 200 GeV/c hadron interactions. A total of 8x10 6 events were recorded using both positively and negatively charged unseparated hadron beams supplied by the CERN SPS. The experiment made use of an intelligent on-line event selection system based on micro-processors (FAMPs) in conjunction with a system of large MWPCs to increase the number of phi-events recorded per unit time. In 32 days of data taking over 600,000 phi-mesons were recorded onto magnetic tape. The physics motivation for collecting a large statistics sample of inclusive phi-mesons was the investigation of the inclusive phi-meson production mechanism and phi-spectroscopy. (Auth.)

  17. Towards consistent and reliable Dutch and international energy statistics for the chemical industry

    International Nuclear Information System (INIS)

    Neelis, M.L.; Pouwelse, J.W.

    2008-01-01

    Consistent and reliable energy statistics are of vital importance for proper monitoring of energy-efficiency policies. In recent studies, irregularities have been reported in the Dutch energy statistics for the chemical industry. We studied in depth the company data that form the basis of the energy statistics in the Netherlands between 1995 and 2004 to find causes for these irregularities. We discovered that chemical products have occasionally been included, resulting in statistics with an inconsistent system boundary. Lack of guidance in the survey for the complex energy conversions in the chemical industry in the survey also resulted in large fluctuations for certain energy commodities. The findings of our analysis have been the basis for a new survey that has been used since 2007. We demonstrate that the annual questionnaire used for the international energy statistics can result in comparable problems as observed in the Netherlands. We suggest to include chemical residual gas as energy commodity in the questionnaire and to include the energy conversions in the chemical industry in the international energy statistics. In addition, we think the questionnaire should be explicit about the treatment of basic chemical products produced at refineries and in the petrochemical industry to avoid system boundary problems

  18. West Valley high-level nuclear waste glass development: a statistically designed mixture study

    Energy Technology Data Exchange (ETDEWEB)

    Chick, L.A.; Bowen, W.M.; Lokken, R.O.; Wald, J.W.; Bunnell, L.R.; Strachan, D.M.

    1984-10-01

    The first full-scale conversion of high-level commercial nuclear wastes to glass in the United States will be conducted at West Valley, New York, by West Valley Nuclear Services Company, Inc. (WVNS), for the US Department of Energy. Pacific Northwest Laboratory (PNL) is supporting WVNS in the design of the glass-making process and the chemical formulation of the glass. This report describes the statistically designed study performed by PNL to develop the glass composition recommended for use at West Valley. The recommended glass contains 28 wt% waste, as limited by process requirements. The waste loading and the silica content (45 wt%) are similar to those in previously developed waste glasses; however, the new formulation contains more calcium and less boron. A series of tests verified that the increased calcium results in improved chemical durability and does not adversely affect the other modeled properties. The optimization study assessed the effects of seven oxide components on glass properties. Over 100 melts combining the seven components into a wide variety of statistically chosen compositions were tested. Viscosity, electrical conductivity, thermal expansion, crystallinity, and chemical durability were measured and empirically modeled as a function of the glass composition. The mathematical models were then used to predict the optimum formulation. This glass was tested and adjusted to arrive at the final composition recommended for use at West Valley. 56 references, 49 figures, 18 tables.

  19. Statistical Energy Analysis (SEA) and Energy Finite Element Analysis (EFEA) Predictions for a Floor-Equipped Composite Cylinder

    Science.gov (United States)

    Grosveld, Ferdinand W.; Schiller, Noah H.; Cabell, Randolph H.

    2011-01-01

    Comet Enflow is a commercially available, high frequency vibroacoustic analysis software founded on Energy Finite Element Analysis (EFEA) and Energy Boundary Element Analysis (EBEA). Energy Finite Element Analysis (EFEA) was validated on a floor-equipped composite cylinder by comparing EFEA vibroacoustic response predictions with Statistical Energy Analysis (SEA) and experimental results. Statistical Energy Analysis (SEA) predictions were made using the commercial software program VA One 2009 from ESI Group. The frequency region of interest for this study covers the one-third octave bands with center frequencies from 100 Hz to 4000 Hz.

  20. Energy statistics for non-residential premises in 1999

    International Nuclear Information System (INIS)

    2000-01-01

    The dominating heating system in premises is distant heating, 52 per cent of the surface area is heated that way. Oil is used for heating in 34 per cent of the surface area and the use of oil is decreasing. Today oil is used in about 9 per cent of the premises compared to 43 per cent in 1981. Natural gas can so far only be used in the southwestern parts of Sweden and is heating 2.6 million of square metres. The total surface area for premises is about 139 million square metres in 1999. Since the beginning of the 1980s the surface area of offices has been increasing and is now about 30 million square metres, or 22 per cent of the premises. The total use of energy in premises is about the same 1999 as in 1998. Still the average consumption has decreased because of an increase of the surface area of premises. Surface area heated merely by heat pumps is almost three times as big as in 1998 which means that the average consumption has considerably decreased. This survey covers non-residential premises in Sweden. It is based on a sample of 7961 properties built before 1999 and on a total survey of properties owned by some of the major owners in the country (about 2000 properties). The survey was carried out in February 2000 as a mail survey. The property owners were asked to give information about type of premises, type of heating system, deliveries of energy for heating, etc. The presentation gives data on deliveries of energy, heated surface area, average consumption, etc., for the total population and for various subdivisions

  1. Energy statistics for non-residential premises in 2000

    International Nuclear Information System (INIS)

    2001-01-01

    The dominating heating system in premises is district heating, 55 per cent of the surface area is heated that way. Oil is used for heating in 19 per cent of the surface area and the use of oil is decreasing. Today oil is used in about 8 per cent of the premises compared to 43 per cent in 1981. Natural gas can so far only be used in the southwestern parts of Sweden and is heating 1.8 million of square metres. The total surface area for premises is about 149 million square metres in 2000. Since the beginning of the 1980s the surface area of offices has been increasing and is now about 44 million square metres, or 30 per cent of the premises. The total use of energy in premises has increased by nearly 400 GWh compared to 1999. Still the average consumption has decreased because of an increase of the surface area of premises. The year 2000 was also warmer than 1999. This survey covers non-residential premises in Sweden. It is based on a sample of 8154 properties built before 2000 and on a total survey of properties owned by some of the major owners in the country (about 1500 properties). The survey was carried out in February 2001 as a mail survey. The property owners were asked to give information about type of premises, type of heating system, deliveries of energy for heating, etc. The presentation gives data on deliveries of energy, heated surface area, average consumption, etc., for the total population and for various subdivisions

  2. Correlation analysis of energy indicators for sustainable development using multivariate statistical techniques

    International Nuclear Information System (INIS)

    Carneiro, Alvaro Luiz Guimaraes; Santos, Francisco Carlos Barbosa dos

    2007-01-01

    Energy is an essential input for social development and economic growth. The production and use of energy cause environmental degradation at all levels, being local, regional and global such as, combustion of fossil fuels causing air pollution; hydropower often causes environmental damage due to the submergence of large areas of land; and global climate change associated with the increasing concentration of greenhouse gases in the atmosphere. As mentioned in chapter 9 of Agenda 21, the Energy is essential to economic and social development and improved quality of life. Much of the world's energy, however, is currently produced and consumed in ways that could not be sustained if technologies were remain constant and if overall quantities were to increase substantially. All energy sources will need to be used in ways that respect the atmosphere, human health, and the environment as a whole. The energy in the context of sustainable development needs a set of quantifiable parameters, called indicators, to measure and monitor important changes and significant progress towards the achievement of the objectives of sustainable development policies. The indicators are divided into four dimensions: social, economic, environmental and institutional. This paper shows a methodology of analysis using Multivariate Statistical Technique that provide the ability to analyse complex sets of data. The main goal of this study is to explore the correlation analysis among the indicators. The data used on this research work, is an excerpt of IBGE (Instituto Brasileiro de Geografia e Estatistica) data census. The core indicators used in this study follows The IAEA (International Atomic Energy Agency) framework: Energy Indicators for Sustainable Development. (author)

  3. Statistical classification techniques in high energy physics (SDDT algorithm)

    International Nuclear Information System (INIS)

    Bouř, Petr; Kůs, Václav; Franc, Jiří

    2016-01-01

    We present our proposal of the supervised binary divergence decision tree with nested separation method based on the generalized linear models. A key insight we provide is the clustering driven only by a few selected physical variables. The proper selection consists of the variables achieving the maximal divergence measure between two different classes. Further, we apply our method to Monte Carlo simulations of physics processes corresponding to a data sample of top quark-antiquark pair candidate events in the lepton+jets decay channel. The data sample is produced in pp̅ collisions at √S = 1.96 TeV. It corresponds to an integrated luminosity of 9.7 fb"-"1 recorded with the D0 detector during Run II of the Fermilab Tevatron Collider. The efficiency of our algorithm achieves 90% AUC in separating signal from background. We also briefly deal with the modification of statistical tests applicable to weighted data sets in order to test homogeneity of the Monte Carlo simulations and measured data. The justification of these modified tests is proposed through the divergence tests. (paper)

  4. A study of statistics anxiety levels of graduate dental hygiene students.

    Science.gov (United States)

    Welch, Paul S; Jacks, Mary E; Smiley, Lynn A; Walden, Carolyn E; Clark, William D; Nguyen, Carol A

    2015-02-01

    In light of increased emphasis on evidence-based practice in the profession of dental hygiene, it is important that today's dental hygienist comprehend statistical measures to fully understand research articles, and thereby apply scientific evidence to practice. Therefore, the purpose of this study was to investigate statistics anxiety among graduate dental hygiene students in the U.S. A web-based self-report, anonymous survey was emailed to directors of 17 MSDH programs in the U.S. with a request to distribute to graduate students. The survey collected data on statistics anxiety, sociodemographic characteristics and evidence-based practice. Statistic anxiety was assessed using the Statistical Anxiety Rating Scale. Study significance level was α=0.05. Only 8 of the 17 invited programs participated in the study. Statistical Anxiety Rating Scale data revealed graduate dental hygiene students experience low to moderate levels of statistics anxiety. Specifically, the level of anxiety on the Interpretation Anxiety factor indicated this population could struggle with making sense of scientific research. A decisive majority (92%) of students indicated statistics is essential for evidence-based practice and should be a required course for all dental hygienists. This study served to identify statistics anxiety in a previously unexplored population. The findings should be useful in both theory building and in practical applications. Furthermore, the results can be used to direct future research. Copyright © 2015 The American Dental Hygienists’ Association.

  5. The Effect of Project Based Learning on the Statistical Literacy Levels of Student 8th Grade

    Science.gov (United States)

    Koparan, Timur; Güven, Bülent

    2014-01-01

    This study examines the effect of project based learning on 8th grade students' statistical literacy levels. A performance test was developed for this aim. Quasi-experimental research model was used in this article. In this context, the statistics were taught with traditional method in the control group and it was taught using project based…

  6. Annual Bulletin of General Energy Statistics for Europe. V. 23, 1990

    International Nuclear Information System (INIS)

    1992-01-01

    The purpose of the Bulletin is to provide basic data on the energy situation as a whole in European countries, Canada and the United States of America. This publication is purely statistical in character. As from the 1980 edition of the bulletin the scope of statistics comprises production of energy by form, overall energy balance sheets and deliveries of petroleum products for inland consumption. While less details are given for solid and gaseous fuels as sources of energy than in previous editions of the bulletin, more information is available for liquid fuels and nuclear, hydro- and geothermal energy

  7. The Canopy Graph and Level Statistics for Random Operators on Trees

    International Nuclear Information System (INIS)

    Aizenman, Michael; Warzel, Simone

    2006-01-01

    For operators with homogeneous disorder, it is generally expected that there is a relation between the spectral characteristics of a random operator in the infinite setup and the distribution of the energy gaps in its finite volume versions, in corresponding energy ranges. Whereas pure point spectrum of the infinite operator goes along with Poisson level statistics, it is expected that purely absolutely continuous spectrum would be associated with gap distributions resembling the corresponding random matrix ensemble. We prove that on regular rooted trees, which exhibit both spectral types, the eigenstate point process has always Poissonian limit. However, we also find that this does not contradict the picture described above if that is carefully interpreted, as the relevant limit of finite trees is not the infinite homogenous tree graph but rather a single-ended 'canopy graph.' For this tree graph, the random Schroedinger operator is proven here to have only pure-point spectrum at any strength of the disorder. For more general single-ended trees it is shown that the spectrum is always singular - pure point possibly with singular continuous component which is proven to occur in some cases

  8. Study of energy fluctuation effect on the statistical mechanics of equilibrium systems

    International Nuclear Information System (INIS)

    Lysogorskiy, Yu V; Wang, Q A; Tayurskii, D A

    2012-01-01

    This work is devoted to the modeling of energy fluctuation effect on the behavior of small classical thermodynamic systems. It is known that when an equilibrium system gets smaller and smaller, one of the major quantities that becomes more and more uncertain is its internal energy. These increasing fluctuations can considerably modify the original statistics. The present model considers the effect of such energy fluctuations and is based on an overlapping between the Boltzmann-Gibbs statistics and the statistics of the fluctuation. Within this o verlap statistics , we studied the effects of several types of energy fluctuations on the probability distribution, internal energy and heat capacity. It was shown that the fluctuations can considerably change the temperature dependence of internal energy and heat capacity in the low energy range and at low temperatures. Particularly, it was found that, due to the lower energy limit of the systems, the fluctuations reduce the probability for the low energy states close to the lowest energy and increase the total average energy. This energy increasing is larger for lower temperatures, making negative heat capacity possible for this case.

  9. Long-term energy efficiency analysis requires solid energy statistics: The case of the German basic chemical industry

    International Nuclear Information System (INIS)

    Saygin, D.; Worrell, E.; Tam, C.; Trudeau, N.; Gielen, D.J.; Weiss, M.; Patel, M.K.

    2012-01-01

    Analyzing the chemical industry’s energy use is challenging because of the sector’s complexity and the prevailing uncertainty in energy use and production data. We develop an advanced bottom-up model (PIE-Plus) which encompasses the energy use of the 139 most important chemical processes. We apply this model in a case study to analyze the German basic chemical industry’s energy use and energy efficiency improvements in the period between 1995 and 2008. We compare our results with data from the German Energy Balances and with data published by the International Energy Agency (IEA). We find that our model covers 88% of the basic chemical industry’s total final energy use (including non-energy use) as reported in the German Energy Balances. The observed energy efficiency improvements range between 2.2 and 3.5% per year, i.e., they are on the higher side of the values typically reported in literature. Our results point to uncertainties in the basic chemical industry’s final energy use as reported in the energy statistics and the specific energy consumption values. More efforts are required to improve the quality of the national and international energy statistics to make them useable for reliable monitoring of energy efficiency improvements of the chemical industry. -- Highlights: ► An advanced model was developed to estimate German chemical industry’s energy use. ► For the base year (2000), model covers 88% of the sector’s total final energy use. ► Sector’s energy efficiency improved between 2.2 and 3.5%/yr between 1995 and 2008. ► Improved energy statistics are required for accurate monitoring of improvements.

  10. A class of energy-based ensembles in Tsallis statistics

    International Nuclear Information System (INIS)

    Chandrashekar, R; Naina Mohammed, S S

    2011-01-01

    A comprehensive investigation is carried out on the class of energy-based ensembles. The eight ensembles are divided into two main classes. In the isothermal class of ensembles the individual members are at the same temperature. A unified framework is evolved to describe the four isothermal ensembles using the currently accepted third constraint formalism. The isothermal–isobaric, grand canonical and generalized ensembles are illustrated through a study of the classical nonrelativistic and extreme relativistic ideal gas models. An exact calculation is possible only in the case of the isothermal–isobaric ensemble. The study of the ideal gas models in the grand canonical and the generalized ensembles has been carried out using a perturbative procedure with the nonextensivity parameter (1 − q) as the expansion parameter. Though all the thermodynamic quantities have been computed up to a particular order in (1 − q) the procedure can be extended up to any arbitrary order in the expansion parameter. In the adiabatic class of ensembles the individual members of the ensemble have the same value of the heat function and a unified formulation to described all four ensembles is given. The nonrelativistic and the extreme relativistic ideal gases are studied in the isoenthalpic–isobaric ensemble, the adiabatic ensemble with number fluctuations and the adiabatic ensemble with number and particle fluctuations

  11. Renewable energy education at the University level

    Energy Technology Data Exchange (ETDEWEB)

    Bhattacharya, S.C. [Asian Institute of Technology, Pathumthani (Thailand). Energy Program

    2001-03-01

    The rapid growth in global enrolment of students for higher education observed in recent decades is expected to continue in the early next century. However, the role of the universities and their approach to education may undergo substantial transformation in the future. The Internet is expected to play a significant role in university-level education in general and renewable energy education (REE) in particular. Currently, REE at different universities is characterized by a lack of uniformity in terms of duration, coursework, emphasis on research, etc. There is a need to establish guidelines and standards regarding academic programs and to establish a system of accreditation, preferably global, of REE in different academic disciplines and departments. (author)

  12. Multivariate statistical analysis of electron energy-loss spectroscopy in anisotropic materials

    International Nuclear Information System (INIS)

    Hu Xuerang; Sun Yuekui; Yuan Jun

    2008-01-01

    Recently, an expression has been developed to take into account the complex dependence of the fine structure in core-level electron energy-loss spectroscopy (EELS) in anisotropic materials on specimen orientation and spectral collection conditions [Y. Sun, J. Yuan, Phys. Rev. B 71 (2005) 125109]. One application of this expression is the development of a phenomenological theory of magic-angle electron energy-loss spectroscopy (MAEELS), which can be used to extract the isotropically averaged spectral information for materials with arbitrary anisotropy. Here we use this expression to extract not only the isotropically averaged spectral information, but also the anisotropic spectral components, without the restriction of MAEELS. The application is based on a multivariate statistical analysis of core-level EELS for anisotropic materials. To demonstrate the applicability of this approach, we have conducted a study on a set of carbon K-edge spectra of multi-wall carbon nanotube (MWCNT) acquired with energy-loss spectroscopic profiling (ELSP) technique and successfully extracted both the averaged and dichroic spectral components of the wrapped graphite-like sheets. Our result shows that this can be a practical alternative to MAEELS for the study of electronic structure of anisotropic materials, in particular for those nanostructures made of layered materials

  13. Optimal Adaptive Statistical Iterative Reconstruction Percentage in Dual-energy Monochromatic CT Portal Venography.

    Science.gov (United States)

    Zhao, Liqin; Winklhofer, Sebastian; Yang, Zhenghan; Wang, Keyang; He, Wen

    2016-03-01

    The aim of this article was to study the influence of different adaptive statistical iterative reconstruction (ASIR) percentages on the image quality of dual-energy computed tomography (DECT) portal venography in portal hypertension patients. DECT scans of 40 patients with cirrhosis (mean age, 56 years) at the portal venous phase were retrospectively analyzed. Monochromatic images at 60 and 70 keV were reconstructed with four ASIR percentages: 0%, 30%, 50%, and 70%. Computed tomography (CT) numbers of the portal veins (PVs), liver parenchyma, and subcutaneous fat tissue in the abdomen were measured. The standard deviation from the region of interest of the liver parenchyma was interpreted as the objective image noise (IN). The contrast-noise ratio (CNR) between PV and liver parenchyma was calculated. The diagnostic acceptability (DA) and sharpness of PV margins were obtained using a 5-point score. The IN, CNR, DA, and sharpness of PV were compared among the eight groups with different keV + ASIR level combinations. The IN, CNR, DA, and sharpness of PV of different keV + ASIR groups were all statistically different (P ASIR and 70 keV + 0% ASIR (filtered back-projection [FBP]) combination, respectively, whereas the largest and smallest objective IN were obtained in the 60 keV + 0% ASIR (FBP) and 70 keV + 70% combination. The highest DA and sharpness values of PV were obtained at 50% ASIR for 60 keV. An optimal ASIR percentage (50%) combined with an appropriate monochromatic energy level (60 keV) provides the highest DA in portal venography imaging, whereas for the higher monochromatic energy (70 keV) images, 30% ASIR provides the highest image quality, with less IN than 60 keV with 50% ASIR. Copyright © 2015 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

  14. Quantifying the statistical importance of utilizing regression over classic energy intensity calculations for tracking efficiency improvements in industry

    Energy Technology Data Exchange (ETDEWEB)

    Nimbalkar, Sachin U. [ORNL; Wenning, Thomas J. [ORNL; Guo, Wei [ORNL

    2017-08-01

    In the United States, manufacturing facilities account for about 32% of total domestic energy consumption in 2014. Robust energy tracking methodologies are critical to understanding energy performance in manufacturing facilities. Due to its simplicity and intuitiveness, the classic energy intensity method (i.e. the ratio of total energy use over total production) is the most widely adopted. However, the classic energy intensity method does not take into account the variation of other relevant parameters (i.e. product type, feed stock type, weather, etc.). Furthermore, the energy intensity method assumes that the facilities’ base energy consumption (energy use at zero production) is zero, which rarely holds true. Therefore, it is commonly recommended to utilize regression models rather than the energy intensity approach for tracking improvements at the facility level. Unfortunately, many energy managers have difficulties understanding why regression models are statistically better than utilizing the classic energy intensity method. While anecdotes and qualitative information may convince some, many have major reservations about the accuracy of regression models and whether it is worth the time and effort to gather data and build quality regression models. This paper will explain why regression models are theoretically and quantitatively more accurate for tracking energy performance improvements. Based on the analysis of data from 114 manufacturing plants over 12 years, this paper will present quantitative results on the importance of utilizing regression models over the energy intensity methodology. This paper will also document scenarios where regression models do not have significant relevance over the energy intensity method.

  15. The Profile of Creativity and Proposing Statistical Problem Quality Level Reviewed From Cognitive Style

    Science.gov (United States)

    Awi; Ahmar, A. S.; Rahman, A.; Minggi, I.; Mulbar, U.; Asdar; Ruslan; Upu, H.; Alimuddin; Hamda; Rosidah; Sutamrin; Tiro, M. A.; Rusli

    2018-01-01

    This research aims to reveal the profile about the level of creativity and the ability to propose statistical problem of students at Mathematics Education 2014 Batch in the State University of Makassar in terms of their cognitive style. This research uses explorative qualitative method by giving meta-cognitive scaffolding at the time of research. The hypothesis of research is that students who have field independent (FI) cognitive style in statistics problem posing from the provided information already able to propose the statistical problem that can be solved and create new data and the problem is already been included as a high quality statistical problem, while students who have dependent cognitive field (FD) commonly are still limited in statistics problem posing that can be finished and do not load new data and the problem is included as medium quality statistical problem.

  16. Is there an optimum level for renewable energy?

    International Nuclear Information System (INIS)

    Moriarty, Patrick; Honnery, Damon

    2011-01-01

    Because continued heavy use of fossil fuel will lead to both global climate change and resource depletion of easily accessible fuels, many researchers advocate a rapid transition to renewable energy (RE) sources. In this paper we examine whether RE can provide anywhere near the levels of primary energy forecast by various official organisations in a business-as-usual world. We find that the energy costs of energy will rise in a non-linear manner as total annual primary RE output increases. In addition, increasing levels of RE will lead to increasing levels of ecosystem maintenance energy costs per unit of primary energy output. The result is that there is an optimum level of primary energy output, in the sense that the sustainable level of energy available to the economy is maximised at that level. We further argue that this optimum occurs at levels well below the energy consumption forecasts for a few decades hence. - Highlights: → We need to shift to renewable energy for climate change and fuel depletion reasons. → We examine whether renewable energy can provide the primary energy levels forecast. → The energy costs of energy rise non-linearly with renewable energy output. → There is thus an optimum level of primary energy output. → This optimum occurs at levels well below future official energy use forecasts.

  17. The buildings networks' energy statistics 2003; Bygningsnettverkets energistatistikk 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The report presents analyses and statistics for the energy consumption in various types of building, mostly commercial buildings. It shows how the energy consumption varies with the type of heating system, cooling, size of building, age etc. Also shown are figures for the energy consumption in relation to function, such as number of students in schools, number of people in nursing homes etc. The climate in Norway was the 6th warmest in 137 years. Energy consumption is given for different climatic zones.

  18. Numerical evaluation of the statistical properties of a potential energy landscape

    International Nuclear Information System (INIS)

    Nave, E La; Sciortino, F; Tartaglia, P; Michele, C De; Mossa, S

    2003-01-01

    The techniques which allow the numerical evaluation of the statistical properties of the potential energy landscape for models of simple liquids are reviewed and critically discussed. Expressions for the liquid free energy and its vibrational and configurational components are reported. Finally, a possible model for the statistical properties of the landscape, which appears to describe correctly fragile liquids in the region where equilibrium simulations are feasible, is discussed

  19. Aging Affects Adaptation to Sound-Level Statistics in Human Auditory Cortex.

    Science.gov (United States)

    Herrmann, Björn; Maess, Burkhard; Johnsrude, Ingrid S

    2018-02-21

    Optimal perception requires efficient and adaptive neural processing of sensory input. Neurons in nonhuman mammals adapt to the statistical properties of acoustic feature distributions such that they become sensitive to sounds that are most likely to occur in the environment. However, whether human auditory responses adapt to stimulus statistical distributions and how aging affects adaptation to stimulus statistics is unknown. We used MEG to study how exposure to different distributions of sound levels affects adaptation in auditory cortex of younger (mean: 25 years; n = 19) and older (mean: 64 years; n = 20) adults (male and female). Participants passively listened to two sound-level distributions with different modes (either 15 or 45 dB sensation level). In a control block with long interstimulus intervals, allowing neural populations to recover from adaptation, neural response magnitudes were similar between younger and older adults. Critically, both age groups demonstrated adaptation to sound-level stimulus statistics, but adaptation was altered for older compared with younger people: in the older group, neural responses continued to be sensitive to sound level under conditions in which responses were fully adapted in the younger group. The lack of full adaptation to the statistics of the sensory environment may be a physiological mechanism underlying the known difficulty that older adults have with filtering out irrelevant sensory information. SIGNIFICANCE STATEMENT Behavior requires efficient processing of acoustic stimulation. Animal work suggests that neurons accomplish efficient processing by adjusting their response sensitivity depending on statistical properties of the acoustic environment. Little is known about the extent to which this adaptation to stimulus statistics generalizes to humans, particularly to older humans. We used MEG to investigate how aging influences adaptation to sound-level statistics. Listeners were presented with sounds drawn from

  20. Maximal sustained levels of energy expenditure in humans during exercise.

    Science.gov (United States)

    Cooper, Jamie A; Nguyen, David D; Ruby, Brent C; Schoeller, Dale A

    2011-12-01

    Migrating birds have been able to sustain an energy expenditure (EE) that is five times their basal metabolic rate. Although humans can readily reach these levels, it is not yet clear what levels can be sustained for several days. The study's purposes were 1) to determine the upper limits of human EE and whether or not those levels can be sustained without inducing catabolism of body tissues and 2) to determine whether initial body weight is related to the levels that can be sustained. We compiled data on documented EE as measured by doubly labeled water during high levels of physical activity (minimum of five consecutive days). We calculated the physical activity level (PAL) of each individual studied (PAL = total EE / basal metabolic rate) from the published data. Correlations were run to examine the relationship between initial body weight and body weight lost with both total EE and PAL. The uppermost limit of EE was a peak PAL of 6.94 that was sustained for 10 consecutive days of a 95-d race. Only two studies reported PALs above 5.0; however, significant decreases in body mass were found in each study (0.45-1.39 kg·wk(-1) of weight loss). To test whether initial weight affects the ability to sustain high PALs, we found a significant positive correlation between TEE and initial body weight (r = 0.46, P body weight (r = 0.27, not statistically significant). Some elite humans are able to sustain PALs above 5.0 for a minimum of 10 d. Although significant decreases in body weight occur at this level, catabolism of body tissue may be preventable in situations with proper energy intake. Further, initial body weight does not seem to affect the sustainability of PALs.

  1. Levelized Cost of Energy of the Weptos wave energy converter

    DEFF Research Database (Denmark)

    Pecher, Arthur; Kofoed, Jens Peter

    This report presents the cost of energy calculations of a wave energy array of 90 MW, consisting of 25 x 3.6 MW Weptos wave energy converters. The calculation has been made in analogy with a publically available document presented by the UK government, covering the case of a similar size wind...

  2. Statistical Models to Assess the Health Effects and to Forecast Ground Level Ozone

    Czech Academy of Sciences Publication Activity Database

    Schlink, U.; Herbath, O.; Richter, M.; Dorling, S.; Nunnari, G.; Cawley, G.; Pelikán, Emil

    2006-01-01

    Roč. 21, č. 4 (2006), s. 547-558 ISSN 1364-8152 R&D Projects: GA AV ČR 1ET400300414 Institutional research plan: CEZ:AV0Z10300504 Keywords : statistical models * ground level ozone * health effects * logistic model * forecasting * prediction performance * neural network * generalised additive model * integrated assessment Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 1.992, year: 2006

  3. Statistical issues in searches for new phenomena in High Energy Physics

    Science.gov (United States)

    Lyons, Louis; Wardle, Nicholas

    2018-03-01

    Many analyses of data in High Energy Physics are concerned with searches for New Physics. We review the statistical issues that arise in such searches, and then illustrate these using the specific example of the recent successful search for the Higgs boson, produced in collisions between high energy protons at CERN’s Large Hadron Collider.

  4. A calculation of internal kinetic energy and polarizability of compressed argon from the statistical atom model

    NARCIS (Netherlands)

    Seldam, C.A. ten; Groot, S.R. de

    1952-01-01

    From Jensen's and Gombás' modification of the statistical Thomas-Fermi atom model, a theory for compressed atoms is developed by changing the boundary conditions. Internal kinetic energy and polarizability of argon are calculated as functions of pressure. At 1000 atm. an internal kinetic energy of

  5. Electrical Energy Statistics for France 2002; Statistiques de l'energie electrique en France - 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-11-01

    Detailed statistics on electricity flows in France and on facilities. Regional data / Consumption per sector of activity / Records over last 10 years (definitive results). In 2002, national electrical consumption reached 449.9 TWh, an increase of 0.3% compared with 2001 (448.6 TWh). Adjusted for winter and summer climate contingencies, its growth rate was 0.9% compared with 2001. Consumption by customers connected at high or medium voltage levels came to 254.2 TWh, an increase of 0.8% compared with 2001 (252.3 TWh); consumption by customers connected at low voltage levels came to 165 TWh, a decrease of 0.8% compared with 2001 (166.4 TWh). Generation in France reached 534.3 TWh, an increase of 11.5 TWh or 2.2% compared with 2001 (522.8 TWh). This increase broke down between nuclear generation and conventional thermal generation. Net nuclear generation injected, as measured by RTE, came to 415.5 TWh in 2002, an increase of 4.0% compared with 2001 (399.6 TWh). Conventional thermal generation came to 51.1 TWh, an increase of 15.4 % compared with 2001 (44.3 TWh). Hydro-electric generation amounted to 65.5 TWh, a fall of 15.3% compared with 2001 (77.3 TWh). In terms of physical exchanges with foreign countries, France exported a net total of 77 TWh, an increase of 12.6% compared with 2001 (68.4 TWh). Contractual exchanges with foreign countries, recorded by RTE, fell by 9.9 % to reach a cumulative value for exports and imports of 107.8 TWh (compared with 120 TWh in 2001)

  6. Non-statistical fluctuations in fragmentation of target nuclei in high energy nuclear interactions

    Energy Technology Data Exchange (ETDEWEB)

    Ghosh, Dipak; Ghosh, Premomoy; Ghosh, Alokananda; Roy, Jaya [Jadavpur Univ., Calcutta (India)

    1994-07-01

    Analysis of target fragmented ''black'' particles in nuclear emulsion from high energy relativistic interactions initiated by [sup 16]O at 2.1 GeV/nucleon and [sup 12]C and [sup 24]Mg at 4.5 GeV/nucleon reveal the existence of non-statistical fluctuations in the azimuthal plane of interaction. The asymmetry or the non-statistical fluctuations, while found to be independent of projectile mass or incident energy, are dependent on the excitation energy of the target nucleus. (Author).

  7. Non-statistical fluctuations in fragmentation of target nuclei in high energy nuclear interactions

    International Nuclear Information System (INIS)

    Ghosh, Dipak; Ghosh, Premomoy; Ghosh, Alokananda; Roy, Jaya

    1994-01-01

    Analysis of target fragmented ''black'' particles in nuclear emulsion from high energy relativistic interactions initiated by 16 O at 2.1 GeV/nucleon and 12 C and 24 Mg at 4.5 GeV/nucleon reveal the existence of non-statistical fluctuations in the azimuthal plane of interaction. The asymmetry or the non-statistical fluctuations, while found to be independent of projectile mass or incident energy, are dependent on the excitation energy of the target nucleus. (Author)

  8. Energy statistics and balances of non-OECD countries 1991-1992

    International Nuclear Information System (INIS)

    1994-01-01

    Contains a compilation of energy production and consumption statistics for 85 non-OECD countries and regions, including developing countries, Central and Eastern European countries and the former Soviet Union. Data are expressed in original units and in common units for coal, oil, gas, electricity and heat. Historical tables for both individual countries and regions summarize data on coal, gas and electricity production and consumption since 1971. Similar data for OECD are available in the IEA publications Energy Statistics and Energy Balances of OECD Countries

  9. Brazilian energy statistics - 2000. Annual bulletin of the Brazilian Committee of the World Energy Council

    International Nuclear Information System (INIS)

    2001-01-01

    This bulletin deals with the primary sources that carry most weight in the Brazilian energy balance: hydroelectric energy, petroleum, natural gas, nuclear energy and coal. It also contains data on ethyl alcohol derived of sugar cane since it is of special importance in Brazil's energy scenario

  10. Brazilian energy statistics - 1999. Annual bulletin of the Brazilian Committee of the World Energy Council

    International Nuclear Information System (INIS)

    1999-01-01

    This bulletin deals with the primary sources that carry most weight in the Brazilian energy balance: hydroelectric energy, petroleum, natural gas, nuclear energy and coal. It also contains data on ethyl alcohol derived of sugar cane since it is of special importance in Brazil's energy scenario

  11. Dynamical and statistical aspects in nucleus-nucleus collisions around the Fermi energy

    Energy Technology Data Exchange (ETDEWEB)

    Tamain, B.; Bocage, F.; Bougault, R.; Brou, R. [Caen Univ., 14 (France). Lab. de Physique Corpusculaire; Assenard, M. [Centre National de la Recherche Scientifique, 44 - Nantes (France). Lab. de Physique Subatomique et des Technologies Associees; Auger, G.; Benlliure, J. [Grand Accelerateur National d`Ions Lourds (GANIL), 14 - Caen (France); Bacri, C.O.; Borderie, B. [Paris-11 Univ., 91 - Orsay (France). Inst. de Physique Nucleaire; Bisquer, E. [Lyon-1 Univ., 69 - Villeurbanne (France). Inst. de Physique Nucleaire] [and others

    1997-12-31

    Nucleus-nucleus collisions at low incident energy are mainly governed by statistical dissipative processes, fusion and deep inelastic reactions being the most important ones. Conversely, in the relativistic energy regime, dynamical effects play a dominant role and one should apply a participant-spectator picture in order to understand the data. In between, the intermediate energy region is a transition one in which it is necessary to disentangle dynamics from statistical effects. Moreover, the Fermi energy region corresponds to available energies comparable with nuclear binding energies and one may except to observe phase transition effects. Experiments performed recently with 4{pi} devices have given quite new data and a much better insight into involved mechanisms and hot nuclear matter properties. INDRA data related to reaction mechanisms and multifragmentation are presented. (author) 53 refs.

  12. Dynamical and statistical aspects in nucleus-nucleus collisions around the Fermi energy

    International Nuclear Information System (INIS)

    Tamain, B.; Bocage, F.; Bougault, R.; Brou, R.; Bacri, C.O.; Borderie, B.; Bisquer, E.

    1997-01-01

    Nucleus-nucleus collisions at low incident energy are mainly governed by statistical dissipative processes, fusion and deep inelastic reactions being the most important ones. Conversely, in the relativistic energy regime, dynamical effects play a dominant role and one should apply a participant-spectator picture in order to understand the data. In between, the intermediate energy region is a transition one in which it is necessary to disentangle dynamics from statistical effects. Moreover, the Fermi energy region corresponds to available energies comparable with nuclear binding energies and one may except to observe phase transition effects. Experiments performed recently with 4π devices have given quite new data and a much better insight into involved mechanisms and hot nuclear matter properties. INDRA data related to reaction mechanisms and multifragmentation are presented. (author)

  13. Nuclear statistics of dysprosium resonance parameters in the energy range 10 - 1000 eV

    International Nuclear Information System (INIS)

    Shin, S. G.; Kye, Y. U.; Cho, M. H.; Kim, G. N.; Namkung, W.; Lee, M. W.; Kang, Y. R.; Roe, T. I.

    2016-01-01

    A resonance parameter analysis is often performed in the Resolved Resonance Region (RRR) in order to estimate the average level spacing, distribution of the reduced widths and so on. Neutron Capture experiments on dysprosium isotopes were performed at the electron linear accelerator (LINAC) facility of the Rensselear Polytechnic Institute (RPI) in the neutron energy region from 10 eV to 1 keV. The following nuclear statistics of the resonance parameters will be discussed in this paper. The D 0 for 161 Dy and 163 Dy were judged to be constant up to 120.6 and 163.9 eV, respectively. It was assumed that the D 0 of 162 Dy and 164 Dy is constant up to 1000 eV because they have few resonances. The results were compared with the values from Reference 11 as shown in Figure 1. Statistical distributions of reduced neutron were investigated for the three isotopes in the region from 0 to 1000 eV; 161 Dy, 162 Dy, and 163 Dy, but not for 164 Dy because of a few number of resonances. The reduced neutron widths Γ n 0 were divided by the unweighted average reduced neutron width < Γ n 0 > for each isotope. A cumulative distribution of these unitless ratios is compared with the integral of the Porter-Thomas distribution (χ 2 distribution with one degree of freedom). The results agree reasonably with the Porter Thomas distributions.

  14. Atmospheric forcing of decadal Baltic Sea level variability in the last 200 years. A statistical analysis

    Energy Technology Data Exchange (ETDEWEB)

    Huenicke, B. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Kuestenforschung

    2008-11-06

    This study aims at the estimation of the impact of different atmospheric factors on the past sealevel variations (up to 200 years) in the Baltic Sea by statistically analysing the relationship between Baltic Sea level records and observational and proxy-based reconstructed climatic data sets. The focus lies on the identification and possible quantification of the contribution of sealevel pressure (wind), air-temperature and precipitation to the low-frequency (decadal and multi-decadal) variability of Baltic Sea level. It is known that the wind forcing is the main factor explaining average Baltic Sea level variability at inter-annual to decadal timescales, especially in wintertime. In this thesis it is statistically estimated to what extent other regional climate factors contribute to the spatially heterogeneous Baltic Sea level variations around the isostatic trend at multi-decadal timescales. Although the statistical analysis cannot be completely conclusive, as the potential climate drivers are all statistically interrelated to some degree, the results indicate that precipitation should be taken into account as an explanatory variable for sea-level variations. On the one hand it has been detected that the amplitude of the annual cycle of Baltic Sea level has increased throughout the 20th century and precipitation seems to be the only factor among those analysed (wind through SLP field, barometric effect, temperature and precipitation) that can account for this evolution. On the other hand, precipitation increases the ability to hindcast inter-annual variations of sea level in some regions and seasons, especially in the Southern Baltic in summertime. The mechanism by which precipitation exerts its influence on Baltic Sea level is not ascertained in this statistical analysis due to the lack of long salinity time series. This result, however, represents a working hypothesis that can be confirmed or disproved by long simulations of the Baltic Sea system - ocean

  15. Statistical analysis of activation and reaction energies with quasi-variational coupled-cluster theory

    Science.gov (United States)

    Black, Joshua A.; Knowles, Peter J.

    2018-06-01

    The performance of quasi-variational coupled-cluster (QV) theory applied to the calculation of activation and reaction energies has been investigated. A statistical analysis of results obtained for six different sets of reactions has been carried out, and the results have been compared to those from standard single-reference methods. In general, the QV methods lead to increased activation energies and larger absolute reaction energies compared to those obtained with traditional coupled-cluster theory.

  16. Statistical selection of tide gauges for Arctic sea-level reconstruction

    DEFF Research Database (Denmark)

    Svendsen, Peter Limkilde; Andersen, Ole Baltazar; Nielsen, Allan Aasbjerg

    2015-01-01

    In this paper, we seek an appropriate selection of tide gauges for Arctic Ocean sea-level reconstruction based on a combination of empirical criteria and statistical properties (leverages). Tide gauges provide the only in situ observations of sea level prior to the altimetry era. However, tide...... the "influence" of each Arctic tide gauge on the EOF-based reconstruction through the use of statistical leverage and use this as an indication in selecting appropriate tide gauges, in order to procedurally identify poor-quality data while still including as much data as possible. To accommodate sparse...

  17. Statistical calculation of complete events in medium-energy nuclear collisions

    International Nuclear Information System (INIS)

    Randrup, J.

    1984-01-01

    Several heavy-ion accelerators throughout the world are presently able to deliver beams of heavy nuclei with kinetic energies in the range from tens to hundreds of MeV per nucleon, the so-called medium or intermediate energy range. At such energies a large number of final channels are open, each consisting of many nuclear fragments. The disassembly of the collision system is expected to be a very complicated process and a detailed dynamical description is beyond their present capability. However, by virtue of the complexity of the process, statistical considerations may be useful. A statistical description of the disassembly yields the least biased expectations about the outcome of a collision process and provides a meaningful reference against which more specific dynamical models, as well as the data, can be discussed. This lecture presents the essential tools for formulating a statistical model for the nuclear disassembly process. The authors consider the quick disassembly (explosion) of a hot nuclear system, a so-called source, into multifragment final states, which complete according to their statistical weight. First some useful notation is introduced. Then the expressions for exclusive and inclusive distributions are given and the factorization of an exclusive distribution into inclusive ones is carried out. In turn, the grand canonical approximation for one-fragment inclusive distributions is introduced. Finally, it is outlined how to generate a statistical sample of complete final states. On this basis, a model for statistical simulation of complete events in medium-energy nuclear collisions has been developed

  18. Simple Levelized Cost of Energy (LCOE) Calculator Documentation | Energy

    Science.gov (United States)

    ;M, performance and fuel costs. Note that this doesn't include financing issues, discount issues ). This means that the LCOE is the minimum price at which energy must be sold for an energy project to the balance between debt-financing and equity-financing, and an assessment of the financial risk

  19. The statistical analysis of energy release in small-scale coronal structures

    Science.gov (United States)

    Ulyanov, Artyom; Kuzin, Sergey; Bogachev, Sergey

    We present the results of statistical analysis of impulsive flare-like brightenings, which numerously occur in the quiet regions of solar corona. For our study, we utilized high-cadence observations performed with two EUV-telescopes - TESIS/Coronas-Photon and AIA/SDO. In total, we processed 6 sequences of images, registered throughout the period between 2009 and 2013, covering the rising phase of the 24th solar cycle. Based on high-speed DEM estimation method, we developed a new technique to evaluate the main parameters of detected events (geometrical sizes, duration, temperature and thermal energy). We then obtained the statistical distributions of these parameters and examined their variations depending on the level of solar activity. The results imply that near the minimum of the solar cycle the energy release in quiet corona is mainly provided by small-scale events (nanoflares), whereas larger events (microflares) prevail on the peak of activity. Furthermore, we investigated the coronal conditions that had specified the formation and triggering of registered flares. By means of photospheric magnetograms obtained with MDI/SoHO and HMI/SDO instruments, we examined the topology of local magnetic fields at different stages: the pre-flare phase, the peak of intensity and the ending phase. To do so, we introduced a number of topological parameters including the total magnetic flux, the distance between magnetic sources and their mutual arrangement. The found correlation between the change of these parameters and the formation of flares may offer an important tool for application of flare forecasting.

  20. Energy end use statistics and estimations in the Polish household sector

    International Nuclear Information System (INIS)

    Gilecki, R.

    1997-01-01

    The energy statistics in Poland was in the past concentrated on energy production and industrial consumption, but little information was available on the households energy consumption. This data unavailability was an important barrier for the various analyses and forecasting of the energy balance developments. In the recent years some successful attempts were made to acquire a wider and more reliable picture of household energy consumption. The households surveys were made and some existing data were analyzed and verified. The better and more detailed picture of households energy use was in this way constructed. The breakdown of energy consumption by end-use categories (space heating, water heating, cooking, electrical appliances) was quite reliably estimated. Important international cooperation and guidance was used in the course of Polish households energy consumption research. (author). 6 refs

  1. Energy end use statistics and estimations in the Polish household sector

    Energy Technology Data Exchange (ETDEWEB)

    Gilecki, R [Energy Information Centre, Warsaw (Poland)

    1997-09-01

    The energy statistics in Poland was in the past concentrated on energy production and industrial consumption, but little information was available on the households energy consumption. This data unavailability was an important barrier for the various analyses and forecasting of the energy balance developments. In the recent years some successful attempts were made to acquire a wider and more reliable picture of household energy consumption. The households surveys were made and some existing data were analyzed and verified. The better and more detailed picture of households energy use was in this way constructed. The breakdown of energy consumption by end-use categories (space heating, water heating, cooking, electrical appliances) was quite reliably estimated. Important international cooperation and guidance was used in the course of Polish households energy consumption research. (author). 6 refs.

  2. Statistical analysis and dimensioning of a wind farm energy storage system

    Directory of Open Access Journals (Sweden)

    Waśkowicz Bartosz

    2017-06-01

    Full Text Available The growth in renewable power generation and more strict local regulations regarding power quality indices will make it necessary to use energy storage systems with renewable power plants in the near future. The capacity of storage systems can be determined using different methods most of which can be divided into either deterministic or stochastic. Deterministic methods are often complicated with numerous parameters and complex models for long term prediction often incorporating meteorological data. Stochastic methods use statistics for ESS (Energy Storage System sizing, which is somewhat intuitive for dealing with the random element of wind speed variation. The proposed method in this paper performs stabilization of output power at one minute intervals to reduce the negative influence of the wind farm on the power grid in order to meet local regulations. This paper shows the process of sizing the ESS for two selected wind farms, based on their levels of variation in generated power and also, for each, how the negative influences on the power grid in the form of voltage variation and a shortterm flicker factor are decreased.

  3. Brazilian energy statistics - 1998. Annual bulletin of the Brazilian Committee of the World Energy Council

    International Nuclear Information System (INIS)

    1998-01-01

    This bulletin deals with the primary sources that carry most weight in the Brazilian energy balance: hydroelectric energy, petroleum, natural gas and coal. It also contains data on ethyl alcohol derived of sugar cane since it is of special importance in Brazil's energy scenario

  4. Brazilian energy statistics - 1991. Annual bulletin of the Brazilian National Committee of the World Energy Council

    International Nuclear Information System (INIS)

    1991-01-01

    This bulletin deals with the primary sources that carry most weight in the Brazilian energy balance: hydraulic energy, petroleum, natural gas and coal. It contains data on ethyl alcohol derived from sugar cane since it is of special importance in Brazil's energy scenario. 13 figs., 22 tabs

  5. Brazilian energy statistics - 1994. Annual bulletin of the Brazilian Committee of the World Energy Council

    International Nuclear Information System (INIS)

    1994-01-01

    This bulletin deals with the primary sources that carry most weight in the Brazilian energy balance: hydraulic energy, petroleum, natural gas and coal. It also contains data on ethyl alcohol derived from sugar cane since it is of special importance in Brazil's energy scenario. 10 figs., 11 tabs

  6. Energy statistics and balances of non-OECD countries 1993-1994

    International Nuclear Information System (INIS)

    1996-01-01

    Contains a compilation of energy supply and consumption statistics for more than 100 non-OECD countries and regions, including developing countries Central and Eastern European countries and the former USSR. Data are expressed in original units and in common units for coal, oil, gas, electricity, heat and combustible renewable and waste. Historical tables for both individual countries and regions summarize data on coal, oil, gas and electricity production, trade and consumption as well as main energy and economic indicators since 1971. Each issue includes definitions of products and flows and notes on the individual countries as well as conversion factors from original units to common energy units. Similar data for OECD are available in the IEA Energy Statistics and Energy Balances of OECD Countries. (author)

  7. The Effect of Project-Based Learning on Students' Statistical Literacy Levels for Data Representation

    Science.gov (United States)

    Koparan, Timur; Güven, Bülent

    2015-01-01

    The point of this study is to define the effect of project-based learning approach on 8th Grade secondary-school students' statistical literacy levels for data representation. To achieve this goal, a test which consists of 12 open-ended questions in accordance with the views of experts was developed. Seventy 8th grade secondary-school students, 35…

  8. A spatial scan statistic for nonisotropic two-level risk cluster.

    Science.gov (United States)

    Li, Xiao-Zhou; Wang, Jin-Feng; Yang, Wei-Zhong; Li, Zhong-Jie; Lai, Sheng-Jie

    2012-01-30

    Spatial scan statistic methods are commonly used for geographical disease surveillance and cluster detection. The standard spatial scan statistic does not model any variability in the underlying risks of subregions belonging to a detected cluster. For a multilevel risk cluster, the isotonic spatial scan statistic could model a centralized high-risk kernel in the cluster. Because variations in disease risks are anisotropic owing to different social, economical, or transport factors, the real high-risk kernel will not necessarily take the central place in a whole cluster area. We propose a spatial scan statistic for a nonisotropic two-level risk cluster, which could be used to detect a whole cluster and a noncentralized high-risk kernel within the cluster simultaneously. The performance of the three methods was evaluated through an intensive simulation study. Our proposed nonisotropic two-level method showed better power and geographical precision with two-level risk cluster scenarios, especially for a noncentralized high-risk kernel. Our proposed method is illustrated using the hand-foot-mouth disease data in Pingdu City, Shandong, China in May 2009, compared with two other methods. In this practical study, the nonisotropic two-level method is the only way to precisely detect a high-risk area in a detected whole cluster. Copyright © 2011 John Wiley & Sons, Ltd.

  9. Level-statistics in Disordered Systems: A single parametric scaling and Connection to Brownian Ensembles

    OpenAIRE

    Shukla, Pragya

    2004-01-01

    We find that the statistics of levels undergoing metal-insulator transition in systems with multi-parametric Gaussian disorders and non-interacting electrons behaves in a way similar to that of the single parametric Brownian ensembles \\cite{dy}. The latter appear during a Poisson $\\to$ Wigner-Dyson transition, driven by a random perturbation. The analogy provides the analytical evidence for the single parameter scaling of the level-correlations in disordered systems as well as a tool to obtai...

  10. Alternative interpretations of statistics on health effects of low-level radiation

    International Nuclear Information System (INIS)

    Hamilton, L.D.

    1983-01-01

    Four examples of the interpretation of statistics of data on low-level radiation are reviewed: (a) genetic effects of the atomic bombs at Hiroshima and Nagasaki, (b) cancer at Rocky Flats, (c) childhood leukemia and fallout in Utah, and (d) cancer among workers at the Portsmouth Naval Shipyard. Aggregation of data, adjustment for age, and other problems related to the determination of health effects of low-level radiation are discussed. Troublesome issues related to post hoc analysis are considered

  11. Matching renewable energy systems to village-level energy needs

    Energy Technology Data Exchange (ETDEWEB)

    Ashworth, J.H.; Neuendorffer, J.W.

    1980-06-01

    This report provides a five step process for matching alternative renewable energy technologies with energy needs in rural villages of developing countries. Analytic tools are given for each of the five steps as well as information that can be expected. Twelve characterization criteria are developed to assist in the matching process. Three of these criteria, called discrimination criteria, are used for preliminary screening of technology possibilities for each need. The other criteria address site-specific temporal, climatic, social, cultural, and environmental characteristics of the energy need, technology, and cost considerations. To illustrate the matching process, seven basic human needs for energy are matched with seven potential renewable energy technologies. The final portion of the paper discusses the advantages of such a matching process and the resources required to initiate such an effort within a development project. Specific recommendations are given for field-testing this process and actions that could be taken immediately in basic research and development, applied research and technology modification, demonstrations, and commercialization to assist in the future diffusion of renewable energy technologies to rural areas of developing countries.

  12. Estimating Solar Energy Potential in Buildings on a Global Level

    DEFF Research Database (Denmark)

    Petrichenko, Ksenia

    2015-01-01

    This chapter contributes to the debate around net-zero energy concept from a global perspective. By means of comprehensive modelling, it analyses how much global building energy consumption could be reduced through utilisation of building-integrated solar energy technologies and energy......-efficiency improvements. Valuable insights on the locations and building types, in which it is feasible to achieve a net-zero level of energy performance through solar energy utilisation, are presented in world maps....

  13. Nuclear energy levels and elementary particles

    International Nuclear Information System (INIS)

    de Wet, J.A.

    1982-01-01

    Considering only exchange forces, the binding energies and excited states of nuclei up to 24 Mg are predicted to within charge independence, and there is no reason why the model should not be extended to cover all of the elements. A comparison of theory with experiment shows that the energy of one exchange is 2.56 MeV. Moreover, there is an attractive well of depth 30 MeV, corresponding to the helium nucleus. before exchange forces become operative. A possible explanation of the origin of mesons is also presented

  14. Statistical analysis of global surface air temperature and sea level using cointegration methods

    DEFF Research Database (Denmark)

    Schmith, Torben; Johansen, Søren; Thejll, Peter

    Global sea levels are rising which is widely understood as a consequence of thermal expansion and melting of glaciers and land-based ice caps. Due to physically-based models being unable to simulate observed sea level trends, semi-empirical models have been applied as an alternative for projecting...... of future sea levels. There is in this, however, potential pitfalls due to the trending nature of the time series. We apply a statistical method called cointegration analysis to observed global sea level and surface air temperature, capable of handling such peculiarities. We find a relationship between sea...... level and temperature and find that temperature causally depends on the sea level, which can be understood as a consequence of the large heat capacity of the ocean. We further find that the warming episode in the 1940s is exceptional in the sense that sea level and warming deviates from the expected...

  15. Damping layout optimization for ship's cabin noise reduction based on statistical energy analysis

    Directory of Open Access Journals (Sweden)

    WU Weiguo

    2017-08-01

    Full Text Available An optimization analysis study concerning the damping control of ship's cabin noise was carried out in order to improve the effect and reduce the weight of damping. Based on the Statistical Energy Analysis (SEA method, a theoretical deduction and numerical analysis of the first-order sensitivity analysis of the A-weighted sound pressure level concerning the damping loss factor of the subsystem were carried out. On this basis, a mathematical optimization model was proposed and an optimization program developed. Next, the secondary development of VA One software was implemented through the use of MATLAB, while the cabin noise damping control layout optimization system was established. Finally, the optimization model of the ship was constructed and numerical experiments of damping control optimization conducted. The damping installation region was divided into five parts with different damping thicknesses. The total weight of damping was set as an objective function and the A-weighted sound pressure level of the target cabin was set as a constraint condition. The best damping thickness was obtained through the optimization program, and the total damping weight was reduced by 60.4%. The results show that the damping noise reduction effect of unit weight is significantly improved through the optimization method. This research successfully solves the installation position and thickness selection problems in the acoustic design of damping control, providing a reliable analysis method and guidance for the design.

  16. Statistical properties of kinetic and total energy densities in reverberant spaces

    DEFF Research Database (Denmark)

    Jacobsen, Finn; Molares, Alfonso Rodriguez

    2010-01-01

    Many acoustical measurements, e.g., measurement of sound power and transmission loss, rely on determining the total sound energy in a reverberation room. The total energy is usually approximated by measuring the mean-square pressure (i.e., the potential energy density) at a number of discrete....... With the advent of a three-dimensional particle velocity transducer, it has become somewhat easier to measure total rather than only potential energy density in a sound field. This paper examines the ensemble statistics of kinetic and total sound energy densities in reverberant enclosures theoretically...... positions. The idea of measuring the total energy density instead of the potential energy density on the assumption that the former quantity varies less with position than the latter goes back to the 1930s. However, the phenomenon was not analyzed until the late 1970s and then only for the region of high...

  17. Absorbed impact energy and mode of fracture: A statistical description of the micro-structural dispersion

    Energy Technology Data Exchange (ETDEWEB)

    Pontikis, V., E-mail: Vassilis.Pontikis@cea.f [Commissariat a l' Energie Atomique, IRAMIS, Laboratoire des Solides Irradies, CNRS UMR 7642, Ecole Polytechnique, 91191 Gif sur Yvette Cedex (France); Gorse, D. [Commissariat a l' Energie Atomique, IRAMIS, Laboratoire des Solides Irradies, CNRS UMR 7642, Ecole Polytechnique, 91191 Gif sur Yvette Cedex (France)

    2009-10-01

    A statistical model is proposed to account for the influence of the dispersion of the microstructure on the ductile-to-brittle transition in body centered cubic (bcc) metals and their alloys. In this model, the dispersion of the microstructure is expressed via a normal distribution of transition temperatures whereas a simple relation exists between the values of absorbed, lower and upper shelf energies, the ductile area fraction and the distribution parameters. It is shown that via an appropriate renormalization of energies and temperatures, experimental data for different materials and ageing conditions align all together on a master curve, guaranteeing thereby the effectiveness of the proposed statistical description.

  18. Absorbed impact energy and mode of fracture: A statistical description of the micro-structural dispersion

    International Nuclear Information System (INIS)

    Pontikis, V.; Gorse, D.

    2009-01-01

    A statistical model is proposed to account for the influence of the dispersion of the microstructure on the ductile-to-brittle transition in body centered cubic (bcc) metals and their alloys. In this model, the dispersion of the microstructure is expressed via a normal distribution of transition temperatures whereas a simple relation exists between the values of absorbed, lower and upper shelf energies, the ductile area fraction and the distribution parameters. It is shown that via an appropriate renormalization of energies and temperatures, experimental data for different materials and ageing conditions align all together on a master curve, guaranteeing thereby the effectiveness of the proposed statistical description.

  19. Enerdata statistical yearbook. ''the key-data of energy worldwide''. 1999 data

    International Nuclear Information System (INIS)

    2000-01-01

    The new edition of the Enerdata statistical yearbook provides the most recent statistical data on energy (oil, gas, coal and power production) and CO 2 emissions worldwide for the 1994-1999 period of time. These data cover 52 countries and 12 geographic areas and are presented in the form of tables and graphs (production, foreign exchanges, consumptions, market shares, sectoral consumption, 1999 energy status, long-term tendencies). More data for a longer period (1970-1999) and for all countries worldwide are available on the CD-Rom version of the yearbook. (J.S.)

  20. Statistical physics inspired energy-efficient coded-modulation for optical communications.

    Science.gov (United States)

    Djordjevic, Ivan B; Xu, Lei; Wang, Ting

    2012-04-15

    Because Shannon's entropy can be obtained by Stirling's approximation of thermodynamics entropy, the statistical physics energy minimization methods are directly applicable to the signal constellation design. We demonstrate that statistical physics inspired energy-efficient (EE) signal constellation designs, in combination with large-girth low-density parity-check (LDPC) codes, significantly outperform conventional LDPC-coded polarization-division multiplexed quadrature amplitude modulation schemes. We also describe an EE signal constellation design algorithm. Finally, we propose the discrete-time implementation of D-dimensional transceiver and corresponding EE polarization-division multiplexed system. © 2012 Optical Society of America

  1. Cost optimal levels for energy performance requirements

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund; Aggerholm, Søren; Kluttig-Erhorn, Heike

    This report summarises the work done within the Concerted Action EPBD from December 2010 to April 2011 in order to feed into the European Commission's proposal for a common European procedure for a Cost-Optimal methodology under the Directive on the Energy Performance of Buildings (recast) 2010/3...

  2. Brazilian energy statistics - 1993. Annual bulletin of the Brazilian Committee of the World Energy Council

    International Nuclear Information System (INIS)

    1993-01-01

    This bulletin deals with the primary sources that carry most weight in the Brazilian energy balance: hydraulic energy, petroleum, natural gas and coal. It contains data on ethyl alcohol derived from sugar cane since it is of special importance in Brazil's energy scenario. Some aspects about the opening or closing of the oil sector are also analysed, including the petroleum and petroleum products business; oil consumption issue; share of energy sources in world scenarios for the year 2020; reserves; prices and investments and the vulnerability of private companies. 12 figs., 16 tabs

  3. Columbia River Basin Seasonal Volumes and Statistics, 1928-1989. 1990 Level Modified Streamflows Computed Seasonal Volumes 61-Year Statistics.

    Energy Technology Data Exchange (ETDEWEB)

    A.G. Crook Company

    1993-04-01

    This report was prepared by the A.G. Crook Company, under contract to Bonneville Power Administration, and provides statistics of seasonal volumes and streamflow for 28 selected sites in the Columbia River Basin.

  4. Statistical analysis of global surface temperature and sea level using cointegration methods

    DEFF Research Database (Denmark)

    Schmidt, Torben; Johansen, Søren; Thejll, Peter

    2012-01-01

    Global sea levels are rising which is widely understood as a consequence of thermal expansion and melting of glaciers and land-based ice caps. Due to the lack of representation of ice-sheet dynamics in present-day physically-based climate models being unable to simulate observed sea level trends......, semi-empirical models have been applied as an alternative for projecting of future sea levels. There is in this, however, potential pitfalls due to the trending nature of the time series. We apply a statistical method called cointegration analysis to observed global sea level and land-ocean surface air...... temperature, capable of handling such peculiarities. We find a relationship between sea level and temperature and find that temperature causally depends on the sea level, which can be understood as a consequence of the large heat capacity of the ocean. We further find that the warming episode in the 1940s...

  5. Order statistics and energy-ordered histograms: an analytical approach to continuum gamma-ray spectra

    International Nuclear Information System (INIS)

    Urrego, J.P.; Cristancho, F.

    2001-01-01

    Full text: Fusion-evaporation heavy ion collisions have enable us to explore new regions of phase space E - I, particularly high spin and excitation energy regions, where level densities are so high that modern detectors are unable to resolve individual gamma-ray transitions and consequently the resulting spectrum is continuous and undoubtedly contains a lot of new physics. In spite of that, very few experiments have been designed to extract conclusions about behavior of nuclei in continuum, thus in order to obtain a continuum spectroscopy it is necessary to apply to numerical simulations. In this sense GAMBLE a Monte Carlo based code- is a powerful tool that with some modifications allows us to test a new method to analyze the outcome of experiments focused on the properties of phase space regions in nuclear continuum: The use of Energy-Ordered Spectra (EOS) . Let's suppose that in a experiment is collected all gamma radiation emitted by a specific nucleus in a fixed intrinsic excitation energy range and that the different EOS are constructed. Although it has been shown that comparisons between such EOS and Monte Carlo simulations give information about the level density and the strength function their interpretation is not too clear because the large number of input values needed in a code like GAMBLE. On the other hand, if we could have an analytical description of EOS, the understanding of the underlying physics would be more simple because one could control exactly the involved variables and eventually simulation would be unnecessary. Promissory advances in that direction come from mathematical theory of Order Statistics (OS) In this work it is described the modified code GAMBLE and some simulated EOS for 170 Hf are shown. The simulations are made with different formulations for both level density (Fermi Gas at constant and variable temperature) and gamma strength function (GDR, single particle). Further it is described in detail how OS are employed in the

  6. Energy security issues at household level in India

    International Nuclear Information System (INIS)

    Jain, Garima

    2010-01-01

    Energy security at the household level implies ensuring assured and regular supply of clean energy fuels at an affordable price for various household activities. Threat to physical availability of clean energy fuels for cooking and lighting is determined through various indicators such as dependence on traditional fuels and limited access to clean fuels. Energy insecurity translates into various adverse social impacts. Financial threat to energy security is indicated by expenses incurred on energy fuels and affordability of clean fuels. Households spend a major portion of their income on acquiring energy fuels; however, due to high price of clean fuels, they continue to depend on traditional and inefficient fuels. There is an urgent need to address factors that pose a threat to energy security at the household level. In this regard, measures taken by the government agencies and other institutions are also reviewed. The paper also suggests the regulatory and policy interventions required to address the energy security issues at the household level.

  7. Fine-structure energy levels, oscillator strengths and lifetimes

    Indian Academy of Sciences (India)

    We have done relativistic calculations for the evaluation of energy levels, oscillator strengths, transition probabilities and lifetimes for Cr VIII ion. Use has been made of configuration interaction technique by including Briet–Pauli approximation. The energies of various levels from the ground state to excited levels of 3s3p6, ...

  8. A Note on Comparing the Power of Test Statistics at Low Significance Levels.

    Science.gov (United States)

    Morris, Nathan; Elston, Robert

    2011-01-01

    It is an obvious fact that the power of a test statistic is dependent upon the significance (alpha) level at which the test is performed. It is perhaps a less obvious fact that the relative performance of two statistics in terms of power is also a function of the alpha level. Through numerous personal discussions, we have noted that even some competent statisticians have the mistaken intuition that relative power comparisons at traditional levels such as α = 0.05 will be roughly similar to relative power comparisons at very low levels, such as the level α = 5 × 10 -8 , which is commonly used in genome-wide association studies. In this brief note, we demonstrate that this notion is in fact quite wrong, especially with respect to comparing tests with differing degrees of freedom. In fact, at very low alpha levels the cost of additional degrees of freedom is often comparatively low. Thus we recommend that statisticians exercise caution when interpreting the results of power comparison studies which use alpha levels that will not be used in practice.

  9. On China's energy intensity statistics: Toward a comprehensive and transparent indicator

    International Nuclear Information System (INIS)

    Wang Xin

    2011-01-01

    A transparent and comprehensive statistical system in China would provide an important basis for enabling a better understanding of the country. This paper focuses on energy intensity (EI), which is one of the most important indicators of China. It firstly reviews China's GDP and energy statistics, showing that China has made great improvements in recent years. The means by which EI data are released and adjusted are then explained. It shows that EI data releases do not provide complete data for calculating EI and constant GDP, which may reduce policy transparency and comprehensiveness. This paper then conducts an EI calculation method that is based on official sources and that respects the data availability of different data release times. It finds that, in general, China's EI statistics can be considered as reliable because most of the results generated by author's calculations match the figures in the official releases. However, two data biases were identified, which may necessitate supplementary information on related constant GDP values used in the official calculation of EI data. The paper concludes by proposing short- and long-term measures for improving EI statistics to provide a transparent and comprehensive EI indicator. - Highlights: → This paper examines data release and adjustment process of energy intensity (EI) target of China. → New insights on the comprehensiveness and transparency of EI data. → Potential data bias between author's calculation and official data due to lack of constant GDP data. → Proposition for improving short- and long-term EI statistical works.

  10. Brazilian energy statistics - 1992. Annual bulletin of the Brazilian National Committee of the World Energy Council

    International Nuclear Information System (INIS)

    1992-01-01

    This bulletin deals with the primary sources that carry most weight in the Brazilian energy balance: hydraulic energy, petroleum, natural gas and coal. It contains data on ethyl alcohol derived from sugar cane since it is of special importance in Brazil's energy scenario. A brief picture of Brazil's electric power status with regard to bordering countries is also presented, giving an idea of the prospects for progress in electric power integration through the implementation of new international electric power interconnection projects. (author). 13 figs., 19 tabs

  11. Brazilian energy statistics - 1990. Annual bulletin of the Brazilian National Committee of the World Energy Council

    International Nuclear Information System (INIS)

    1990-01-01

    This bulletin deals with the primary sources that carry most weight in the Brazilian energy balance: hydroelectric energy, petroleum, natural gas and coal. It contains data on ethyl alcohol derived from sugar cane since it is of major importance in Brazil's energy scenario. The Brazilian Power Sector's Environmental Master Plan is also described including the expansion planning and the handling of socio-environmental issues; the power sector's evolution in the treatment of socio-environmental issues; the guidelines for socio-environmental planning and management and the institutional and technical development in the socio-environmental area. 15 figs., 16 tabs

  12. Statistical analysis regarding energy supply and demand in the EU and Romania between 1990 and 2014

    Directory of Open Access Journals (Sweden)

    Evelina GRADINARU

    2016-07-01

    Full Text Available Climate changes and mankind’s unlimited needs in term of energy, in opposition with the limited nature of our planet energy sources, impose an all new approach regarding the way in which we produce our energy and how efficient we are using it. The European Union is a world leader in promoting sustainability in this field, and Romania, as part of this multi-state organization, follows the same path. We will see further in this paper the evolution of the main statistical indicators regarding energy, with a particular emphasis on electricity, for both the EU and Romania. The starting point will be primary energy production and demand, continuing with the sources of energy, and finishing with electricity and its relevant indicators regarding production and renewable sources. Finally, the relevant conclusions will be drawn.

  13. New energy level identifications in Kr VI

    International Nuclear Information System (INIS)

    Tauheed, A.; Pinnington, E.H.; Ansbacher, W.; Kernahan, J.A.

    1990-01-01

    Beam-foil delayed spectra from 89.0 to 101.0 nm are used to identify the intercombination lines connecting the 4s4p 2 4 P and 4s 2 4p 2 P levels in Kr VI. The existing analysis is extended to include the 4s 2 5s 2 S 1/2 , 4f 2 F 5/2 , 2 F 7/2 , 4p 3 2 D 3/2 , 2 D 5/2 , 2 P 3/2 , 4 S 3/2 and 4s4p 2 4 P 1/2 , 4 P 3/2 , 4 P 5/2 levels. Lifetime measurements for the 4s4p 2 4 P 1/2 , 4 P 5/2 , 4p 3 2 D 3/2 and 2 D 5/2 levels are also discussed in support of these assignments. (orig.)

  14. Statistical modeling in phenomenological description of electromagnetic cascade processes produced by high-energy gamma quanta

    International Nuclear Information System (INIS)

    Slowinski, B.

    1987-01-01

    A description of a simple phenomenological model of electromagnetic cascade process (ECP) initiated by high-energy gamma quanta in heavy absorbents is given. Within this model spatial structure and fluctuations of ionization losses of shower electrons and positrons are described. Concrete formulae have been obtained as a result of statistical analysis of experimental data from the xenon bubble chamber of ITEP (Moscow)

  15. Statistical mechanical perturbation theory of solid-vapor interfacial free energy

    NARCIS (Netherlands)

    Kalikmanov, Vitalij Iosifovitsj; Hagmeijer, Rob; Venner, Cornelis H.

    2017-01-01

    The solid–vapor interfacial free energy γsv plays an important role in a number of physical phenomena, such as adsorption, wetting, and adhesion. We propose a closed form expression for the orientation averaged value of this quantity using a statistical mechanical perturbation approach developed in

  16. Statistical Mechanical Perturbation Theory of Solid−Vapor Interfacial Free Energy

    NARCIS (Netherlands)

    Kalikmanov, V.I.; Hagmeijer, R.; Venner, C.H.

    2017-01-01

    The solid–vapor interfacial free energy γsv plays an important role in a number of physical phenomena, such as adsorption, wetting, and adhesion. We propose a closed form expression for the orientation averaged value of this quantity using a statistical mechanical perturbation approach developed in

  17. On the relation between the statistical γ-decay and the level density in 162Dy

    International Nuclear Information System (INIS)

    Henden, L.; Bergholt, L.; Guttormsen, M.; Rekstad, J.; Tveter, T.S.

    1994-12-01

    The level density of low-spin states (0-10ℎ) in 162 Dy has been determined from the ground state up to approximately 6 MeV of excitation energy. Levels in the excitation region up to 8 MeV were populated by means of the 163 Dy( 3 He, α) reaction, and the first-generation γ-rays in the decay of these states has been isolated. The energy distribution of the first-generation γ-rays provides a new source of information about the nuclear level density over a wide energy region. A broad peak is observed in the first-generation spectra, and the authors suggest an interpretation in terms of enhanced M1 transitions between different high-j Nilsson orbitals. 30 refs., 9 figs., 2 tabs

  18. Learning Object Names at Different Hierarchical Levels Using Cross-Situational Statistics.

    Science.gov (United States)

    Chen, Chi-Hsin; Zhang, Yayun; Yu, Chen

    2018-05-01

    Objects in the world usually have names at different hierarchical levels (e.g., beagle, dog, animal). This research investigates adults' ability to use cross-situational statistics to simultaneously learn object labels at individual and category levels. The results revealed that adults were able to use co-occurrence information to learn hierarchical labels in contexts where the labels for individual objects and labels for categories were presented in completely separated blocks, in interleaved blocks, or mixed in the same trial. Temporal presentation schedules significantly affected the learning of individual object labels, but not the learning of category labels. Learners' subsequent generalization of category labels indicated sensitivity to the structure of statistical input. Copyright © 2017 Cognitive Science Society, Inc.

  19. Cosmology constraints from shear peak statistics in Dark Energy Survey Science Verification data

    International Nuclear Information System (INIS)

    Kacprzak, T.; Kirk, D.; Friedrich, O.; Amara, A.; Refregier, A.

    2016-01-01

    Shear peak statistics has gained a lot of attention recently as a practical alternative to the two-point statistics for constraining cosmological parameters. We perform a shear peak statistics analysis of the Dark Energy Survey (DES) Science Verification (SV) data, using weak gravitational lensing measurements from a 139 deg"2 field. We measure the abundance of peaks identified in aperture mass maps, as a function of their signal-to-noise ratio, in the signal-to-noise range 0 4 would require significant corrections, which is why we do not include them in our analysis. We compare our results to the cosmological constraints from the two-point analysis on the SV field and find them to be in good agreement in both the central value and its uncertainty. Lastly, we discuss prospects for future peak statistics analysis with upcoming DES data.

  20. Virial-statistic method for calculation of atom and molecule energies

    International Nuclear Information System (INIS)

    Borisov, Yu.A.

    1977-01-01

    A virial-statistical method has been applied to the calculation of the atomization energies of the following molecules: Mo(CO) 6 , Cr(CO) 6 , Fe(CO) 5 , MnH(CO) 5 , CoH(CO) 4 , Ni(CO) 4 . The principles of this method are briefly presented. Calculation results are given for the individual contributions to the atomization energies together with the calculated and experimental atomization energies (D). For the Mo(CO) 6 complex Dsub(calc) = 1759 and Dsub(exp) = 1763 kcal/mole. Calculated and experimental combination heat values for carbonyl complexes are presented. These values are shown to be adequately consistent [ru

  1. Statistical evaluation of Pacific Northwest Residential Energy Consumption Survey weather data

    Energy Technology Data Exchange (ETDEWEB)

    Tawil, J.J.

    1986-02-01

    This report addresses an issue relating to energy consumption and conservation in the residential sector. BPA has obtained two meteorological data bases for use with its 1983 Pacific Northwest Residential Energy Survey (PNWRES). One data base consists of temperature data from weather stations; these have been aggregated to form a second data base that covers the National Oceanographic and Atmospheric Administration (NOAA) climatic divisions. At BPA's request, Pacific Northwest Laboratory has produced a household energy use model for both electricity and natural gas in order to determine whether the statistically estimated parameters of the model significantly differ when the two different meteorological data bases are used.

  2. Simulation on a car interior aerodynamic noise control based on statistical energy analysis

    Science.gov (United States)

    Chen, Xin; Wang, Dengfeng; Ma, Zhengdong

    2012-09-01

    How to simulate interior aerodynamic noise accurately is an important question of a car interior noise reduction. The unsteady aerodynamic pressure on body surfaces is proved to be the key effect factor of car interior aerodynamic noise control in high frequency on high speed. In this paper, a detail statistical energy analysis (SEA) model is built. And the vibra-acoustic power inputs are loaded on the model for the valid result of car interior noise analysis. The model is the solid foundation for further optimization on car interior noise control. After the most sensitive subsystems for the power contribution to car interior noise are pointed by SEA comprehensive analysis, the sound pressure level of car interior aerodynamic noise can be reduced by improving their sound and damping characteristics. The further vehicle testing results show that it is available to improve the interior acoustic performance by using detailed SEA model, which comprised by more than 80 subsystems, with the unsteady aerodynamic pressure calculation on body surfaces and the materials improvement of sound/damping properties. It is able to acquire more than 2 dB reduction on the central frequency in the spectrum over 800 Hz. The proposed optimization method can be looked as a reference of car interior aerodynamic noise control by the detail SEA model integrated unsteady computational fluid dynamics (CFD) and sensitivity analysis of acoustic contribution.

  3. The effect of project-based learning on students' statistical literacy levels for data representation

    Science.gov (United States)

    Koparan, Timur; Güven, Bülent

    2015-07-01

    The point of this study is to define the effect of project-based learning approach on 8th Grade secondary-school students' statistical literacy levels for data representation. To achieve this goal, a test which consists of 12 open-ended questions in accordance with the views of experts was developed. Seventy 8th grade secondary-school students, 35 in the experimental group and 35 in the control group, took this test twice, one before the application and one after the application. All the raw scores were turned into linear points by using the Winsteps 3.72 modelling program that makes the Rasch analysis and t-tests, and an ANCOVA analysis was carried out with the linear points. Depending on the findings, it was concluded that the project-based learning approach increases students' level of statistical literacy for data representation. Students' levels of statistical literacy before and after the application were shown through the obtained person-item maps.

  4. Data on electrical energy conservation using high efficiency motors for the confidence bounds using statistical techniques.

    Science.gov (United States)

    Shaikh, Muhammad Mujtaba; Memon, Abdul Jabbar; Hussain, Manzoor

    2016-09-01

    In this article, we describe details of the data used in the research paper "Confidence bounds for energy conservation in electric motors: An economical solution using statistical techniques" [1]. The data presented in this paper is intended to show benefits of high efficiency electric motors over the standard efficiency motors of similar rating in the industrial sector of Pakistan. We explain how the data was collected and then processed by means of formulas to show cost effectiveness of energy efficient motors in terms of three important parameters: annual energy saving, cost saving and payback periods. This data can be further used to construct confidence bounds for the parameters using statistical techniques as described in [1].

  5. Statistical Characterization of 18650-Format Lithium-Ion Cell Thermal Runaway Energy Distributions

    Science.gov (United States)

    Walker, William Q.; Rickman, Steven; Darst, John; Finegan, Donal; Bayles, Gary; Darcy, Eric

    2017-01-01

    Effective thermal management systems, designed to handle the impacts of thermal runaway (TR) and to prevent cell-to-cell propagation, are key to safe operation of lithium-ion (Li-ion) battery assemblies. Critical factors for optimizing these systems include the total energy released during a single cell TR event and the fraction of the total energy that is released through the cell casing vs. through the ejecta material. A unique calorimeter was utilized to examine the TR behavior of a statistically significant number of 18650-format Li-ion cells with varying manufacturers, chemistries, and capacities. The calorimeter was designed to contain the TR energy in a format conducive to discerning the fractions of energy released through the cell casing vs. through the ejecta material. Other benefits of this calorimeter included the ability to rapidly test of large quantities of cells and the intentional minimization of secondary combustion effects. High energy (270 Wh/kg) and moderate energy (200 Wh/kg) 18650 cells were tested. Some of the cells had an imbedded short circuit (ISC) device installed to aid in the examination of TR mechanisms under more realistic conditions. Other variations included cells with bottom vent (BV) features and cells with thin casings (0.22 1/4m). After combining the data gathered with the calorimeter, a statistical approach was used to examine the probability of certain TR behavior, and the associated energy distributions, as a function of capacity, venting features, cell casing thickness and temperature.

  6. A statistical method to get surface level air-temperature from satellite observations of precipitable water

    Digital Repository Service at National Institute of Oceanography (India)

    Pankajakshan, T.; Shikauchi, A; Sugimori, Y.; Kubota, M.

    -T a and precipitable water. The rms errors of the SSMI-T a , in this case are found to be reduced to 1.0°C. 1. Introduction Satellite derived surface-level meteorological parameters are considered to be a better alternative to sparse ship... Vol. 49, pp. 551 to 558. 1993 A Statistical Method to Get Surface Level Air-Temperature from Satellite Observations of Precipitable Water PANKAJAKSHAN THADATHIL*, AKIRA SHIKAUCHI, YASUHIRO SUGIMORI and MASAHISA KUBOTA School of Marine Science...

  7. Full-counting statistics of energy transport of molecular junctions in the polaronic regime

    International Nuclear Information System (INIS)

    Tang, Gaomin; Yu, Zhizhou; Wang, Jian

    2017-01-01

    We investigate the full-counting statistics (FCS) of energy transport carried by electrons in molecular junctions for the Anderson–Holstein model in the polaronic regime. Using the two-time quantum measurement scheme, the generating function (GF) for the energy transport is derived and expressed as a Fredholm determinant in terms of Keldysh nonequilibrium Green’s function in the time domain. Dressed tunneling approximation is used in decoupling the phonon cloud operator in the polaronic regime. This formalism enables us to analyze the time evolution of energy transport dynamics after a sudden switch-on of the coupling between the dot and the leads towards the stationary state. The steady state energy current cumulant GF in the long time limit is obtained in the energy domain as well. Universal relations for steady state energy current FCS are derived under a finite temperature gradient with zero bias and this enabled us to express the equilibrium energy current cumulant by a linear combination of lower order cumulants. The behaviors of energy current cumulants in steady state under temperature gradient and external bias are numerically studied and explained. The transient dynamics of energy current cumulants is numerically calculated and analyzed. Universal scaling of normalized transient energy cumulants is found under both temperature gradient and external bias. (paper)

  8. Can Family Planning Service Statistics Be Used to Track Population-Level Outcomes?

    Science.gov (United States)

    Magnani, Robert J; Ross, John; Williamson, Jessica; Weinberger, Michelle

    2018-03-21

    The need for annual family planning program tracking data under the Family Planning 2020 (FP2020) initiative has contributed to renewed interest in family planning service statistics as a potential data source for annual estimates of the modern contraceptive prevalence rate (mCPR). We sought to assess (1) how well a set of commonly recorded data elements in routine service statistics systems could, with some fairly simple adjustments, track key population-level outcome indicators, and (2) whether some data elements performed better than others. We used data from 22 countries in Africa and Asia to analyze 3 data elements collected from service statistics: (1) number of contraceptive commodities distributed to clients, (2) number of family planning service visits, and (3) number of current contraceptive users. Data quality was assessed via analysis of mean square errors, using the United Nations Population Division World Contraceptive Use annual mCPR estimates as the "gold standard." We also examined the magnitude of several components of measurement error: (1) variance, (2) level bias, and (3) slope (or trend) bias. Our results indicate modest levels of tracking error for data on commodities to clients (7%) and service visits (10%), and somewhat higher error rates for data on current users (19%). Variance and slope bias were relatively small for all data elements. Level bias was by far the largest contributor to tracking error. Paired comparisons of data elements in countries that collected at least 2 of the 3 data elements indicated a modest advantage of data on commodities to clients. None of the data elements considered was sufficiently accurate to be used to produce reliable stand-alone annual estimates of mCPR. However, the relatively low levels of variance and slope bias indicate that trends calculated from these 3 data elements can be productively used in conjunction with the Family Planning Estimation Tool (FPET) currently used to produce annual m

  9. Geometric Approach to Quantum Statistical Mechanics and Application to Casimir Energy and Friction Properties

    International Nuclear Information System (INIS)

    Ichinose, Shoichi

    2010-01-01

    A geometric approach to general quantum statistical systems (including the harmonic oscillator) is presented. It is applied to Casimir energy and the dissipative system with friction. We regard the (N+1)-dimensional Euclidean coordinate system (X i ,τ) as the quantum statistical system of N quantum (statistical) variables (X τ ) and one Euclidean time variable (t). Introducing paths (lines or hypersurfaces) in this space (X τ ,t), we adopt the path-integral method to quantize the mechanical system. This is a new view of (statistical) quantization of the mechanical system. The system Hamiltonian appears as the area. We show quantization is realized by the minimal area principle in the present geometric approach. When we take a line as the path, the path-integral expressions of the free energy are shown to be the ordinary ones (such as N harmonic oscillators) or their simple variation. When we take a hyper-surface as the path, the system Hamiltonian is given by the area of the hyper-surface which is defined as a closed-string configuration in the bulk space. In this case, the system becomes a O(N) non-linear model. We show the recently-proposed 5 dimensional Casimir energy (ArXiv:0801.3064,0812.1263) is valid. We apply this approach to the visco-elastic system, and present a new method using the path-integral for the calculation of the dissipative properties.

  10. Comparing energy levels in isotropic and anisotropic potentials

    Energy Technology Data Exchange (ETDEWEB)

    Pikovski, Alexander, E-mail: alexander.pikovski@colorado.edu

    2015-11-06

    Qualitative information about the quantized energy levels of a system can be of great value. We study the relationship between the bound-state energies of an anisotropic potential and those of its spherical average. It is shown that the two ground-state energies satisfy an inequality, and there is a similar inequality for the first excited states. - Highlights: • Quantized energy levels in an arbitrary non-central potential are studied. • We derive inequalities between energies in a potential and its spherical average. • The results hold in three and two dimensions for any ground state and, with additional symmetry requirements for the first excited state.

  11. Comparing energy levels in isotropic and anisotropic potentials

    International Nuclear Information System (INIS)

    Pikovski, Alexander

    2015-01-01

    Qualitative information about the quantized energy levels of a system can be of great value. We study the relationship between the bound-state energies of an anisotropic potential and those of its spherical average. It is shown that the two ground-state energies satisfy an inequality, and there is a similar inequality for the first excited states. - Highlights: • Quantized energy levels in an arbitrary non-central potential are studied. • We derive inequalities between energies in a potential and its spherical average. • The results hold in three and two dimensions for any ground state and, with additional symmetry requirements for the first excited state.

  12. Assessing thermal comfort and energy efficiency in buildings by statistical quality control for autocorrelated data

    International Nuclear Information System (INIS)

    Barbeito, Inés; Zaragoza, Sonia; Tarrío-Saavedra, Javier; Naya, Salvador

    2017-01-01

    Highlights: • Intelligent web platform development for energy efficiency management in buildings. • Controlling and supervising thermal comfort and energy consumption in buildings. • Statistical quality control procedure to deal with autocorrelated data. • Open source alternative using R software. - Abstract: In this paper, a case study of performing a reliable statistical procedure to evaluate the quality of HVAC systems in buildings using data retrieved from an ad hoc big data web energy platform is presented. The proposed methodology based on statistical quality control (SQC) is used to analyze the real state of thermal comfort and energy efficiency of the offices of the company FRIDAMA (Spain) in a reliable way. Non-conformities or alarms, and the actual assignable causes of these out of control states are detected. The capability to meet specification requirements is also analyzed. Tools and packages implemented in the open-source R software are employed to apply the different procedures. First, this study proposes to fit ARIMA time series models to CTQ variables. Then, the application of Shewhart and EWMA control charts to the time series residuals is proposed to control and monitor thermal comfort and energy consumption in buildings. Once thermal comfort and consumption variability are estimated, the implementation of capability indexes for autocorrelated variables is proposed to calculate the degree to which standards specifications are met. According with case study results, the proposed methodology has detected real anomalies in HVAC installation, helping to detect assignable causes and to make appropriate decisions. One of the goals is to perform and describe step by step this statistical procedure in order to be replicated by practitioners in a better way.

  13. The Impact of Subsampling on MODIS Level-3 Statistics of Cloud Optical Thickness and Effective Radius

    Science.gov (United States)

    Oreopoulos, Lazaros

    2004-01-01

    The MODIS Level-3 optical thickness and effective radius cloud product is a gridded l deg. x 1 deg. dataset that is derived from aggregation and subsampling at 5 km of 1 km, resolution Level-2 orbital swath data (Level-2 granules). This study examines the impact of the 5 km subsampling on the mean, standard deviation and inhomogeneity parameter statistics of optical thickness and effective radius. The methodology is simple and consists of estimating mean errors for a large collection of Terra and Aqua Level-2 granules by taking the difference of the statistics at the original and subsampled resolutions. It is shown that the Level-3 sampling does not affect the various quantities investigated to the same degree, with second order moments suffering greater subsampling errors, as expected. Mean errors drop dramatically when averages over a sufficient number of regions (e.g., monthly and/or latitudinal averages) are taken, pointing to a dominance of errors that are of random nature. When histograms built from subsampled data with the same binning rules as in the Level-3 dataset are used to reconstruct the quantities of interest, the mean errors do not deteriorate significantly. The results in this paper provide guidance to users of MODIS Level-3 optical thickness and effective radius cloud products on the range of errors due to subsampling they should expect and perhaps account for, in scientific work with this dataset. In general, subsampling errors should not be a serious concern when moderate temporal and/or spatial averaging is performed.

  14. Research Update: Spatially resolved mapping of electronic structure on atomic level by multivariate statistical analysis

    International Nuclear Information System (INIS)

    Belianinov, Alex; Ganesh, Panchapakesan; Lin, Wenzhi; Jesse, Stephen; Pan, Minghu; Kalinin, Sergei V.; Sales, Brian C.; Sefat, Athena S.

    2014-01-01

    Atomic level spatial variability of electronic structure in Fe-based superconductor FeTe 0.55 Se 0.45 (T c = 15 K) is explored using current-imaging tunneling-spectroscopy. Multivariate statistical analysis of the data differentiates regions of dissimilar electronic behavior that can be identified with the segregation of chalcogen atoms, as well as boundaries between terminations and near neighbor interactions. Subsequent clustering analysis allows identification of the spatial localization of these dissimilar regions. Similar statistical analysis of modeled calculated density of states of chemically inhomogeneous FeTe 1−x Se x structures further confirms that the two types of chalcogens, i.e., Te and Se, can be identified by their electronic signature and differentiated by their local chemical environment. This approach allows detailed chemical discrimination of the scanning tunneling microscopy data including separation of atomic identities, proximity, and local configuration effects and can be universally applicable to chemically and electronically inhomogeneous surfaces

  15. Misuse of statistics in the interpretation of data on low-level radiation

    International Nuclear Information System (INIS)

    Hamilton, L.D.

    1982-01-01

    Four misuses of statistics in the interpretation of data of low-level radiation are reviewed: (1) post-hoc analysis and aggregation of data leading to faulty conclusions in the reanalysis of genetic effects of the atomic bomb, and premature conclusions on the Portsmouth Naval Shipyard data; (2) inappropriate adjustment for age and ignoring differences between urban and rural areas leading to potentially spurious increase in incidence of cancer at Rocky Flats; (3) hazard of summary statistics based on ill-conditioned individual rates leading to spurious association between childhood leukemia and fallout in Utah; and (4) the danger of prematurely published preliminary work with inadequate consideration of epidemiological problems - censored data - leading to inappropriate conclusions, needless alarm at the Portsmouth Naval Shipyard, and diversion of scarce research funds

  16. Misuse of statistics in the interpretation of data on low-level radiation

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, L.D.

    1982-01-01

    Four misuses of statistics in the interpretation of data of low-level radiation are reviewed: (1) post-hoc analysis and aggregation of data leading to faulty conclusions in the reanalysis of genetic effects of the atomic bomb, and premature conclusions on the Portsmouth Naval Shipyard data; (2) inappropriate adjustment for age and ignoring differences between urban and rural areas leading to potentially spurious increase in incidence of cancer at Rocky Flats; (3) hazard of summary statistics based on ill-conditioned individual rates leading to spurious association between childhood leukemia and fallout in Utah; and (4) the danger of prematurely published preliminary work with inadequate consideration of epidemiological problems - censored data - leading to inappropriate conclusions, needless alarm at the Portsmouth Naval Shipyard, and diversion of scarce research funds.

  17. Effects of pairing correlation on nuclear level density parameter and nucleon separation energy

    International Nuclear Information System (INIS)

    Rajesekaran, T.R.; Selvaraj, S.

    2002-01-01

    A systematic study of effects of pairing correlations on nuclear level density parameter 'a' and neutron separation energy S N is presented for 152 Gd using statistical theory of nuclei with deformation, collective and noncollective rotational degrees of freedom, shell effects, and pairing correlations

  18. Cultural energy analyses of dairy cattle receiving different concentrate levels

    International Nuclear Information System (INIS)

    Koknaroglu, Hayati

    2010-01-01

    Purpose of this study was to conduct cultural energy analyses of dairy cows receiving different levels of concentrate. Data were acquired by conducting a survey on 132 dairy farms selected by the stratified random sampling method. Dairy cattle farms were divided into three groups according to concentrate level and were analyzed. Accordingly concentrate levels were assigned as low (LLC) ( 50%, 44 farms). Cultural energy used for feed for cows was calculated by multiplying each ingredient with corresponding values of ingredients from literature. Transportation energy was also included in the analysis. Total cultural energy expended was highest for LLC (P < 0.05). Cultural energy expended for feed constituted more than half of the total cultural energy and was highest for LLC (P < 0.05). Cultural energy expended per kg milk and per Mcal protein energy was higher for LLC (P < 0.05). Efficiency defined as Mcal input/Mcal output was better for ILC and was worse for LLC (P < 0.05) and HLC was intermediate thus not differing from other groups. Results show that cultural energy use efficiency does not linearly increases as concentrate level increases and increasing concentrate level does not necessarily mean better efficiency. Thus optimum concentrate level not interfering cows performance should be sought for sustainable dairy production.

  19. A case study: application of statistical process control tool for determining process capability and sigma level.

    Science.gov (United States)

    Chopra, Vikram; Bairagi, Mukesh; Trivedi, P; Nagar, Mona

    2012-01-01

    Statistical process control is the application of statistical methods to the measurement and analysis of variation process. Various regulatory authorities such as Validation Guidance for Industry (2011), International Conference on Harmonisation ICH Q10 (2009), the Health Canada guidelines (2009), Health Science Authority, Singapore: Guidance for Product Quality Review (2008), and International Organization for Standardization ISO-9000:2005 provide regulatory support for the application of statistical process control for better process control and understanding. In this study risk assessments, normal probability distributions, control charts, and capability charts are employed for selection of critical quality attributes, determination of normal probability distribution, statistical stability, and capability of production processes, respectively. The objective of this study is to determine tablet production process quality in the form of sigma process capability. By interpreting data and graph trends, forecasting of critical quality attributes, sigma process capability, and stability of process were studied. The overall study contributes to an assessment of process at the sigma level with respect to out-of-specification attributes produced. Finally, the study will point to an area where the application of quality improvement and quality risk assessment principles for achievement of six sigma-capable processes is possible. Statistical process control is the most advantageous tool for determination of the quality of any production process. This tool is new for the pharmaceutical tablet production process. In the case of pharmaceutical tablet production processes, the quality control parameters act as quality assessment parameters. Application of risk assessment provides selection of critical quality attributes among quality control parameters. Sequential application of normality distributions, control charts, and capability analyses provides a valid statistical

  20. Statistical model for expected un supplied energy; Statistisk modell for forventet ILE

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    Results from a statistical analysis of expected un supplied energy for Norwegian network companies are presented. The data are from the years 1996-2004. The estimation model includes several explanatory variables that together reflect the characteristics of the network, climatic aspects and other geographical conditions. The model has a high degree of accuracy when compared to the historical number of un supplied energy for about 90 percent of the network companies. But for 12 companies there are substantial, negative deviances that are not compatible with the available data. There is reason to believe that improved data for some types of variables can improve the accuracy of the model. In addition to establishing a norm for expected un supplied energy in the revenue estimations, the model can be used to reflect geographical constraints in NVEs (Norwegian Water and Energy directorate) efficiency analyses (ml)

  1. Statistical mechanical foundation of the peridynamic nonlocal continuum theory: energy and momentum conservation laws.

    Science.gov (United States)

    Lehoucq, R B; Sears, Mark P

    2011-09-01

    The purpose of this paper is to derive the energy and momentum conservation laws of the peridynamic nonlocal continuum theory using the principles of classical statistical mechanics. The peridynamic laws allow the consideration of discontinuous motion, or deformation, by relying on integral operators. These operators sum forces and power expenditures separated by a finite distance and so represent nonlocal interaction. The integral operators replace the differential divergence operators conventionally used, thereby obviating special treatment at points of discontinuity. The derivation presented employs a general multibody interatomic potential, avoiding the standard assumption of a pairwise decomposition. The integral operators are also expressed in terms of a stress tensor and heat flux vector under the assumption that these fields are differentiable, demonstrating that the classical continuum energy and momentum conservation laws are consequences of the more general peridynamic laws. An important conclusion is that nonlocal interaction is intrinsic to continuum conservation laws when derived using the principles of statistical mechanics.

  2. Preliminary study of energy confinement data with a statistical analysis system in HL-2A tokamak

    International Nuclear Information System (INIS)

    Xu Yuan; Cui Zhengying; Ji Xiaoquan; Dong Chunfeng; Yang Qingwei; O J W F Kardaun

    2010-01-01

    Taking advantage of the HL-2A experimental data,an energy confinement database facing ITERL DB2.0 version has been originally established. As for this database,a world widely used statistical analysis system (SAS) has been adopted for the first time to analyze and evaluate the confinement data from HL-2A and the research on scaling laws of energy confinement time corresponding to plasma density is developed, some preliminary results having been achieved. Finally, through comparing with both ITER scaling law and previous ASDEX database, the investigation about L-mode confinement quality on HL-2A and influence of temperature on Spitzer resistivity will be discussed. (authors)

  3. Meso-level analysis, the missing link in energy strategies

    International Nuclear Information System (INIS)

    Schenk, Niels J.; Moll, Henri C.; Schoot Uiterkamp, Anton J.M.

    2007-01-01

    Energy is essential for human societies. Energy systems, though, are also associated with several adverse environmental effects. So far societies have been unable to successfully change their energy systems in a way that addresses environmental and health concerns. Lack of policy consensus often resulted in so-called 'stop-go' policies, which were identified as some of the most important barriers regarding successful energy transitions. The lack of policy consensus and coherent long-term strategies may result from a lack of knowledge of energy systems' meso-level dynamics. The meso-level involves the dynamic behaviour of the individual system elements and the coupling of individual technologies, resulting in interdependencies and regimes. Energy systems are at the meso-level characterised by two typical aspects, i.e. dynamics driven by interactions between actors, and heterogeneous characteristics of actors. These aspects give rise to the ineffectiveness of traditional energy policies, which is illustrated with examples from the transport sector and household electricity consumption. We found that analysis of energy systems at the meso-level helps to better understand energy systems. To resolve persistent policy issues, the traditional 'one size fits all' energy policies are not sufficient. In order to tackle the difficult issues, 'redesign of system organisation', 'target group approach', or 'target group induced system re-orientation' are needed

  4. MULTI-LEVEL SAMPLING APPROACH FOR CONTINOUS LOSS DETECTION USING ITERATIVE WINDOW AND STATISTICAL MODEL

    OpenAIRE

    Mohd Fo'ad Rohani; Mohd Aizaini Maarof; Ali Selamat; Houssain Kettani

    2010-01-01

    This paper proposes a Multi-Level Sampling (MLS) approach for continuous Loss of Self-Similarity (LoSS) detection using iterative window. The method defines LoSS based on Second Order Self-Similarity (SOSS) statistical model. The Optimization Method (OM) is used to estimate self-similarity parameter since it is fast and more accurate in comparison with other estimation methods known in the literature. Probability of LoSS detection is introduced to measure continuous LoSS detection performance...

  5. Non-statistically populated autoionizing levels of Li-like carbon: Hidden-crossings

    International Nuclear Information System (INIS)

    Deveney, E.F.; Krause, H.F.; Jones, N.L.

    1995-01-01

    The intensities of the Auger-electron lines from autoionizing (AI) states of Li-like (1s2s2l) configurations excited in ion-atom collisions vary as functions of the collision parameters such as, for example, the collision velocity. A statistical population of the three-electron levels is at best incomplete and underscores the intricate dynamical development of the electronic states. The authors compare several experimental studies to calculations using ''hidden-crossing'' techniques to explore some of the details of these Auger-electron intensity variation phenomena. The investigations show promising results suggesting that Auger-electron intensity variations can be used to probe collision dynamics

  6. The statistical interpretations of counting data from measurements of low-level radioactivity

    International Nuclear Information System (INIS)

    Donn, J.J.; Wolke, R.L.

    1977-01-01

    The statistical model appropriate to measurements of low-level or background-dominant radioactivity is examined and the derived relationships are applied to two practical problems involving hypothesis testing: 'Does the sample exhibit a net activity above background' and 'Is the activity of the sample below some preselected limit'. In each of these cases, the appropriate decision rule is formulated, procedures are developed for estimating the preset count which is necessary to achieve a desired probability of detection, and a specific sequence of operations is provided for the worker in the field. (author)

  7. Inferring Parametric Energy Consumption Functions at Different Software Levels

    DEFF Research Database (Denmark)

    Liqat, Umer; Georgiou, Kyriakos; Kerrison, Steve

    2016-01-01

    The static estimation of the energy consumed by program executions is an important challenge, which has applications in program optimization and verification, and is instrumental in energy-aware software development. Our objective is to estimate such energy consumption in the form of functions...... on the input data sizes of programs. We have developed a tool for experimentation with static analysis which infers such energy functions at two levels, the instruction set architecture (ISA) and the intermediate code (LLVM IR) levels, and reflects it upwards to the higher source code level. This required...... the development of a translation from LLVM IR to an intermediate representation and its integration with existing components, a translation from ISA to the same representation, a resource analyzer, an ISA-level energy model, and a mapping from this model to LLVM IR. The approach has been applied to programs...

  8. How to Draw Energy Level Diagrams in Excitonic Solar Cells.

    Science.gov (United States)

    Zhu, X-Y

    2014-07-03

    Emerging photovoltaic devices based on molecular and nanomaterials are mostly excitonic in nature. The initial absorption of a photon in these materials creates an exciton that can subsequently dissociate in each material or at their interfaces to give charge carriers. Any attempt at mechanistic understanding of excitonic solar cells must start with drawing energy level diagrams. This seemingly elementary exercise, which is described in textbooks for inorganic solar cells, has turned out to be a difficult subject in the literature. The problem stems from conceptual confusion of single-particle energy with quasi-particle energy and the misleading practice of mixing the two on the same energy level diagram. Here, I discuss how to draw physically accurate energy diagrams in excitonic solar cells using only single-particle energies (ionization potentials and electron affinities) of both ground and optically excited states. I will briefly discuss current understanding on the electronic energy landscape responsible for efficient charge separation in excitonic solar cells.

  9. STATCONT: A statistical continuum level determination method for line-rich sources

    Science.gov (United States)

    Sánchez-Monge, Á.; Schilke, P.; Ginsburg, A.; Cesaroni, R.; Schmiedeke, A.

    2018-01-01

    STATCONT is a python-based tool designed to determine the continuum emission level in spectral data, in particular for sources with a line-rich spectrum. The tool inspects the intensity distribution of a given spectrum and automatically determines the continuum level by using different statistical approaches. The different methods included in STATCONT are tested against synthetic data. We conclude that the sigma-clipping algorithm provides the most accurate continuum level determination, together with information on the uncertainty in its determination. This uncertainty can be used to correct the final continuum emission level, resulting in the here called `corrected sigma-clipping method' or c-SCM. The c-SCM has been tested against more than 750 different synthetic spectra reproducing typical conditions found towards astronomical sources. The continuum level is determined with a discrepancy of less than 1% in 50% of the cases, and less than 5% in 90% of the cases, provided at least 10% of the channels are line free. The main products of STATCONT are the continuum emission level, together with a conservative value of its uncertainty, and datacubes containing only spectral line emission, i.e., continuum-subtracted datacubes. STATCONT also includes the option to estimate the spectral index, when different files covering different frequency ranges are provided.

  10. A Statistical Study of Serum Cholesterol Level by Gender and Race.

    Science.gov (United States)

    Tharu, Bhikhari Prasad; Tsokos, Chris P

    2017-07-25

    Cholesterol level (CL) is growing concerned as health issue in human health since it is considered one of the causes in heart diseases. A study of cholesterol level can provide insight about its nature and characteristics. A cross-sectional study. National Health and Nutrition Examination Survey (NHANS) II was conducted on a probability sample of approximately 28,000 persons in the USA and cholesterol level is obtained from laboratory results. Samples were selected so that certain population groups thought to be at high risk of malnutrition. Study included 11,864 persons for CL cases with 9,602 males and 2,262 females with races: whites, blacks, and others. Non-parametric statistical tests and goodness of fit test have been used to identify probability distributions. The study concludes that the cholesterol level exhibits significant racial and gender differences in terms of probability distributions. The study has concluded that white people are relatively higher at risk than black people to have risk line and high risk cholesterol. The study clearly indicates that black males normally have higher cholesterol. Females have lower variation in cholesterol than males. There exists gender and racial discrepancies in cholesterol which has been identified as lognormal and gamma probability distributions. White individuals seem to be at a higher risk of having high risk cholesterol level than blacks. Females tend to have higher variation in cholesterol level than males.

  11. The effect of serum magnesium levels and serum endothelin-1 levels on bone mineral density in protein energy malnutrition.

    Science.gov (United States)

    Ozturk, C F; Karakelleoglu, C; Orbak, Z; Yildiz, L

    2012-06-01

    An inadequate and imbalanced intake of protein and energy results in protein-energy malnutrition (PEM). It is known that bone mineral density and serum magnesium levels are low in malnourished children. However, the roles of serum magnesium and endothelin-1 (ET-1) levels in the pathophysiology of bone mineralization are obscure. Thus, the relationships between serum magnesium and ET-1 levels and the changes in bone mineral density were investigated in this study. There was a total of 32 subjects, 25 of them had PEM and seven were controls. While mean serum ET-1 levels of the children with kwashiorkor and marasmus showed no statistically significant difference, mean serum ET-1 levels of both groups were significantly higher than that of the control group. Serum magnesium levels were lower than normal value in 9 (36%) of 25 malnourished children. Malnourished children included in this study were divided into two subgroups according to their serum magnesium levels. While mean serum ET-1 levels in the group with low magnesium levels were significantly higher than that of the group with normal magnesium levels (p malnutrition. Our study suggested that lower magnesium levels and higher ET-1 levels might be important factors in changes of bone mineral density in malnutrition. We recommend that the malnourished patients, especially with hypomagnesaemia, should be treated with magnesium early.

  12. Statistical analysis of the acceleration of Baltic mean sea-level rise, 1900-2012

    Directory of Open Access Journals (Sweden)

    Birgit Hünicke

    2016-07-01

    Full Text Available We analyse annual mean sea-level records from tide-gauges located in the Baltic and parts of the North Sea with the aim of detecting an acceleration of sea-level rise over the 20textsuperscript{th} and 21textsuperscript{st} centuries. The acceleration is estimated as a (1 fit to a polynomial of order two in time, (2 a long-term linear increase in the rates computed over gliding overlapping decadal time segments, and (3 a long-term increase of the annual increments of sea level.The estimation methods (1 and (2 prove to be more powerful in detecting acceleration when tested with sea-level records produced in global climate model simulations. These methods applied to the Baltic-Sea tide-gauges are, however, not powerful enough to detect a significant acceleration in most of individual records, although most estimated accelerations are positive. This lack of detection of statistically significant acceleration at the individual tide-gauge level can be due to the high-level of local noise and not necessarily to the absence of acceleration.The estimated accelerations tend to be stronger in the north and east of the Baltic Sea. Two hypothesis to explain this spatial pattern have been explored. One is that this pattern reflects the slow-down of the Glacial Isostatic Adjustment. However, a simple estimation of this effect suggests that this slow-down cannot explain the estimated acceleration. The second hypothesis is related to the diminishing sea-ice cover over the 20textsuperscript{th} century. The melting o of less saline and colder sea-ice can lead to changes in sea-level. Also, the melting of sea-ice can reduce the number of missing values in the tide-gauge records in winter, potentially influencing the estimated trends and acceleration of seasonal mean sea-level This hypothesis cannot be ascertained either since the spatial pattern of acceleration computed for winter and summer separately are very similar. The all-station-average-record displays an

  13. Histogram plots and cutoff energies for nuclear discrete levels

    International Nuclear Information System (INIS)

    Belgya, T.; Molnar, G.; Fazekas, B.; Oestoer, J.

    1997-05-01

    Discrete level schemes for 1277 nuclei, from 6 Li through 251 Es, extracted from the Evaluated Nuclear Structure Data File were analyzed. Cutoff energies (U max ), indicating the upper limit of level scheme completeness, were deduced from the inspection of histograms of the cumulative number of levels. Parameters of the constant-temperature level density formula (nuclear temperature T and energy shift U 0 ) were obtained by means of the least square fit of the formula to the known levels below cutoff energy. The results are tabulated for all 1277 nuclei allowing for an easy and reliable application of the constant-temperature level density approach. A complete set of cumulative plots of discrete levels is also provided. (author). 5 figs, 2 tabs

  14. Realistic level densities in fragment emission at high excitation energies

    International Nuclear Information System (INIS)

    Mustafa, M.G.; Blann, M.; Ignatyuk, A.V.

    1993-01-01

    Heavy fragment emission from a 44 100 Ru compound nucleus at 400 and 800 MeV of excitation is analyzed to study the influence of level density models on final yields. An approach is used in which only quasibound shell-model levels are included in calculating level densities. We also test the traditional Fermi gas model for which there is no upper energy limit to the single particle levels. We compare the influence of these two level density models in evaporation calculations of primary fragment excitations, kinetic energies and yields, and on final product yields

  15. Statistical and physical content of low-energy photons in nuclear medicine imaging

    International Nuclear Information System (INIS)

    Gagnon, D.; Pouliot, N.; Laperriere, L.; Harel, F.; Gregoire, J.; Arsenault, A.

    1990-01-01

    Limit in the energy resolution of present gamma camera technology prevents a total rejection of Compton events: inclusion of bad photons in the image is inescapable. Various methods acquiring data over a large portion of the spectrum have already been described. This paper investigates the usefulness of low energy photons using statistical and physical models. Holospectral Imaging, for instance, exploits correlation between energy frames to build an information related transformation optimizing primary photon image. One can also use computer simulation to show that a portion of low energy photons is detected at the same location (pixel) as pure primary photons. These events are for instance: photons undergoing scatter interaction in the crystal; photons undergoing a small angle backscatter or forwardscatter interaction in the medium, photons backscattered by the Pyrex into the crystal. For a 140 keV source in 10 cm of water and a 1/4 inch thick crystal, more than 6% of all the photons detected do not have the primary energy and still are located in the right 4 mm pixel. Similarly, it is possible to show that more than 5% of all the photons detected at 140 keV deposit their energy in more than one pixel. These results give additional support to techniques considering low energy photons and more sophisticated ways to segregate between good and bad events

  16. On the Statistical Properties of Turbulent Energy Transfer Rate in the Inner Heliosphere

    Science.gov (United States)

    Sorriso-Valvo, Luca; Carbone, Francesco; Perri, Silvia; Greco, Antonella; Marino, Raffaele; Bruno, Roberto

    2018-01-01

    The transfer of energy from large to small scales in solar wind turbulence is an important ingredient of the long-standing question of the mechanism of the interplanetary plasma heating. Previous studies have shown that magnetohydrodynamic (MHD) turbulence is statistically compatible with the observed solar wind heating as it expands in the heliosphere. However, in order to understand which processes contribute to the plasma heating, it is necessary to have a local description of the energy flux across scales. To this aim, it is customary to use indicators such as the magnetic field partial variance of increments (PVI), which is associated with the local, relative, scale-dependent magnetic energy. A more complete evaluation of the energy transfer should also include other terms, related to velocity and cross-helicity. This is achieved here by introducing a proxy for the local, scale-dependent turbulent energy transfer rate ɛ_{Δ t}(t), based on the third-order moment scaling law for MHD turbulence. Data from Helios 2 are used to determine the statistical properties of such a proxy in comparison with the magnetic and velocity fields PVI, and the correlation with local solar wind heating is computed. PVI and ɛ_{Δ t}(t) are generally well correlated; however, ɛ_{Δ t}(t) is a very sensitive proxy that can exhibit large amplitude values, both positive and negative, even for low amplitude peaks in the PVI. Furthermore, ɛ_{Δ t}(t) is very well correlated with local increases of the temperature when large amplitude bursts of energy transfer are localized, thus suggesting an important role played by this proxy in the study of plasma energy dissipation.

  17. Evaluation of higher order statistics parameters for multi channel sEMG using different force levels.

    Science.gov (United States)

    Naik, Ganesh R; Kumar, Dinesh K

    2011-01-01

    The electromyograpy (EMG) signal provides information about the performance of muscles and nerves. The shape of the muscle signal and motor unit action potential (MUAP) varies due to the movement of the position of the electrode or due to changes in contraction level. This research deals with evaluating the non-Gaussianity in Surface Electromyogram signal (sEMG) using higher order statistics (HOS) parameters. To achieve this, experiments were conducted for four different finger and wrist actions at different levels of Maximum Voluntary Contractions (MVCs). Our experimental analysis shows that at constant force and for non-fatiguing contractions, probability density functions (PDF) of sEMG signals were non-Gaussian. For lesser MVCs (below 30% of MVC) PDF measures tends to be Gaussian process. The above measures were verified by computing the Kurtosis values for different MVCs.

  18. 27-Level DC–AC inverter with single energy source

    International Nuclear Information System (INIS)

    Tsang, K.M.; Chan, W.L.

    2012-01-01

    Highlights: ► This paper reports a novel 27-level DC–AC inverter using only single renewable energy source. ► The efficiency of the inverter is very high. The output waveform is almost sinusoidal. ► The cost is low as the number of power switches required is only 12. - Abstract: A novel design of multilevel DC–AC inverter using only single renewable energy source is presented in this paper. The proposed approach enables multilevel output to be realised by a few cascaded H-bridges and a single energy source. As an illustration, a 27-level inverter has been implemented based on three cascaded H-bridges with a single energy source and two capacitors. Using the proposed novel switching strategy, 27 levels can be realized and the two virtual energy sources can be well regulated. Experimental results are included to demonstrate the effectiveness of the proposed inverter.

  19. Graph theory applied to noise and vibration control in statistical energy analysis models.

    Science.gov (United States)

    Guasch, Oriol; Cortés, Lluís

    2009-06-01

    A fundamental aspect of noise and vibration control in statistical energy analysis (SEA) models consists in first identifying and then reducing the energy flow paths between subsystems. In this work, it is proposed to make use of some results from graph theory to address both issues. On the one hand, linear and path algebras applied to adjacency matrices of SEA graphs are used to determine the existence of any order paths between subsystems, counting and labeling them, finding extremal paths, or determining the power flow contributions from groups of paths. On the other hand, a strategy is presented that makes use of graph cut algorithms to reduce the energy flow from a source subsystem to a receiver one, modifying as few internal and coupling loss factors as possible.

  20. Bayesian Statistical Analysis of Historical and Late Holocene Rates of Sea-Level Change

    Science.gov (United States)

    Cahill, Niamh; Parnell, Andrew; Kemp, Andrew; Horton, Benjamin

    2014-05-01

    A fundamental concern associated with climate change is the rate at which sea levels are rising. Studies of past sea level (particularly beyond the instrumental data range) allow modern sea-level rise to be placed in a more complete context. Considering this, we perform a Bayesian statistical analysis on historical and late Holocene rates of sea-level change. The data that form the input to the statistical model are tide-gauge measurements and proxy reconstructions from cores of coastal sediment. The aims are to estimate rates of sea-level rise, to determine when modern rates of sea-level rise began and to observe how these rates have been changing over time. Many of the current methods for doing this use simple linear regression to estimate rates. This is often inappropriate as it is too rigid and it can ignore uncertainties that arise as part of the data collection exercise. This can lead to over confidence in the sea-level trends being characterized. The proposed Bayesian model places a Gaussian process prior on the rate process (i.e. the process that determines how rates of sea-level are changing over time). The likelihood of the observed data is the integral of this process. When dealing with proxy reconstructions, this is set in an errors-in-variables framework so as to take account of age uncertainty. It is also necessary, in this case, for the model to account for glacio-isostatic adjustment, which introduces a covariance between individual age and sea-level observations. This method provides a flexible fit and it allows for the direct estimation of the rate process with full consideration of all sources of uncertainty. Analysis of tide-gauge datasets and proxy reconstructions in this way means that changing rates of sea level can be estimated more comprehensively and accurately than previously possible. The model captures the continuous and dynamic evolution of sea-level change and results show that not only are modern sea levels rising but that the rates

  1. Dietary energy level for optimum productivity and carcass ...

    African Journals Online (AJOL)

    user

    2013-08-05

    Aug 5, 2013 ... optimum weights at dietary energy levels of 13.81, 13.23, 13.43 and ... Tadelle & Ogle (2000) reported that energy requirement of ..... The authors would like to acknowledge the National Research Foundation (NRF) and VLIR ...

  2. Comparison between reflectivity statistics at heights of 3 and 6 km and rain rate statistics at ground level

    Science.gov (United States)

    Crane, R. K.

    1975-01-01

    An experiment was conducted to study the relations between the empirical distribution functions of reflectivity at specified locations above the surface and the corresponding functions at the surface. A bistatic radar system was used to measure continuously the scattering cross section per unit volume at heights of 3 and 6 km. A frequency of 3.7 GHz was used in the tests. It was found that the distribution functions for reflectivity may significantly change with height at heights below the level of the melting layer.

  3. Energy levels of germanium, Ge I through Ge XXXII

    International Nuclear Information System (INIS)

    Sugar, J.; Musgrove, A.

    1993-01-01

    Atomic energy levels of germanium have been compiled for all stages of ionization for which experimental data are available. No data have yet been published for Ge VIII through Ge XIII and Ge XXXII. Very accurate calculated values are compiled for Ge XXXI and XXXII. Experimental g-factors and leading percentages from calculated eigenvectors of levels are given. A value for the ionization energy, either experimental when available or theoretical, is included for the neutral atom and each ion. section

  4. Prediction of the Electromagnetic Field Distribution in a Typical Aircraft Using the Statistical Energy Analysis

    Science.gov (United States)

    Kovalevsky, Louis; Langley, Robin S.; Caro, Stephane

    2016-05-01

    Due to the high cost of experimental EMI measurements significant attention has been focused on numerical simulation. Classical methods such as Method of Moment or Finite Difference Time Domain are not well suited for this type of problem, as they require a fine discretisation of space and failed to take into account uncertainties. In this paper, the authors show that the Statistical Energy Analysis is well suited for this type of application. The SEA is a statistical approach employed to solve high frequency problems of electromagnetically reverberant cavities at a reduced computational cost. The key aspects of this approach are (i) to consider an ensemble of system that share the same gross parameter, and (ii) to avoid solving Maxwell's equations inside the cavity, using the power balance principle. The output is an estimate of the field magnitude distribution in each cavity. The method is applied on a typical aircraft structure.

  5. New energy levels of praseodymium with large angular momentum

    Energy Technology Data Exchange (ETDEWEB)

    Khan, Shamim; Siddiqui, Imran; Gamper, Bettina; Syed, Tanweer Iqbal; Guthoehrlein, Guenter H.; Windholz, Laurentius [Inst. f. Experimentalphysik, Techn. Univ. Graz, Petersgasse 16, A-8010 Graz (Austria)

    2011-07-01

    The electronic ground state configuration of praseodymium {sup 59}Pr{sub 141} is [Xe] 4f{sup 3}6s{sup 2}, with ground state level {sup 4}I{sub 9/2}. Our research is mainly devoted to find previously unknown energy levels by the investigation of spectral lines and their hyperfine structures. In a hollow cathode discharge lamp praseodymium atoms and ions in ground and excited states are excited to high lying states by laser light. The excitation source is a tunable ring-dye laser system, operated with R6G, Kiton Red, DCM and LD700. A high resolution Fourier transform spectrum is used for selecting promising excitation wavelengths. Then the laser wavelength is tuned to a strong hyperfine component of the spectral line to be investigated, and a search for fluorescence from excited levels is performed. From the observed hyperfine structure we determine J-values and hyperfine constants A of the combining levels. This information, together with excitation and fluorescence wavelengths, allows us to find the energies of involved new levels. Up to now we have discovered large number of previously unknown energy levels with various angular momentum values. We present here the data (energies, parities, angular momenta J, magnetic hyperfine constants A) of ca. 40 new, until now unknown energy levels with high angular momentum values: 15/2, 17/2, 19/2, 21/2.

  6. A Source-level Energy Optimization Framework for Mobile Applications

    DEFF Research Database (Denmark)

    Li, Xueliang; Gallagher, John Patrick

    2016-01-01

    strategies. The framework also lays a foundation for the code optimization by automatic tools. To the best of our knowledge, our work is the first that achieves this for a high-level language such as Java. In a case study, the experimental evaluation shows that our approach is able to save from 6.4% to 50...... process. The source code is the interface between the developer and hardware resources. In this paper, we propose an energy optimization framework guided by a source code energy model that allows developers to be aware of energy usage induced by the code and to apply very targeted source-level refactoring...

  7. Temperature dependent energy levels of methylammonium lead iodide perovskite

    Science.gov (United States)

    Foley, Benjamin J.; Marlowe, Daniel L.; Sun, Keye; Saidi, Wissam A.; Scudiero, Louis; Gupta, Mool C.; Choi, Joshua J.

    2015-06-01

    Temperature dependent energy levels of methylammonium lead iodide are investigated using a combination of ultraviolet photoemission spectroscopy and optical spectroscopy. Our results show that the valence band maximum and conduction band minimum shift down in energy by 110 meV and 77 meV as temperature increases from 28 °C to 85 °C. Density functional theory calculations using slab structures show that the decreased orbital splitting due to thermal expansion is a major contribution to the experimentally observed shift in energy levels. Our results have implications for solar cell performance under operating conditions with continued sunlight exposure and increased temperature.

  8. Temperature dependent energy levels of methylammonium lead iodide perovskite

    Energy Technology Data Exchange (ETDEWEB)

    Foley, Benjamin J.; Marlowe, Daniel L.; Choi, Joshua J., E-mail: jjc6z@virginia.edu, E-mail: mgupta@virginia.edu, E-mail: scudiero@wsu.edu [Department of Chemical Engineering, University of Virginia, Charlottesville, Virginia 22904 (United States); Sun, Keye; Gupta, Mool C., E-mail: jjc6z@virginia.edu, E-mail: mgupta@virginia.edu, E-mail: scudiero@wsu.edu [Department of Electrical and Computer Engineering, University of Virginia, Charlottesville, Virginia 22904 (United States); Saidi, Wissam A. [Department of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, Pennsylvania 15261 (United States); Scudiero, Louis, E-mail: jjc6z@virginia.edu, E-mail: mgupta@virginia.edu, E-mail: scudiero@wsu.edu [Chemistry Department and Materials Science and Engineering Program, Washington State University, Pullman, Washington 99164 (United States)

    2015-06-15

    Temperature dependent energy levels of methylammonium lead iodide are investigated using a combination of ultraviolet photoemission spectroscopy and optical spectroscopy. Our results show that the valence band maximum and conduction band minimum shift down in energy by 110 meV and 77 meV as temperature increases from 28 °C to 85 °C. Density functional theory calculations using slab structures show that the decreased orbital splitting due to thermal expansion is a major contribution to the experimentally observed shift in energy levels. Our results have implications for solar cell performance under operating conditions with continued sunlight exposure and increased temperature.

  9. Protein logic: a statistical mechanical study of signal integration at the single-molecule level.

    Science.gov (United States)

    de Ronde, Wiet; Rein ten Wolde, Pieter; Mugler, Andrew

    2012-09-05

    Information processing and decision-making is based upon logic operations, which in cellular networks has been well characterized at the level of transcription. In recent years, however, both experimentalists and theorists have begun to appreciate that cellular decision-making can also be performed at the level of a single protein, giving rise to the notion of protein logic. Here we systematically explore protein logic using a well-known statistical mechanical model. As an example system, we focus on receptors that bind either one or two ligands, and their associated dimers. Notably, we find that a single heterodimer can realize any of the 16 possible logic gates, including the XOR gate, by variation of biochemical parameters. We then introduce what to our knowledge is a novel idea: that a set of receptors with fixed parameters can encode functionally unique logic gates simply by forming different dimeric combinations. An exhaustive search reveals that the simplest set of receptors (two single-ligand receptors and one double-ligand receptor) can realize several different groups of three unique gates, a result for which the parametric analysis of single receptors and dimers provides a clear interpretation. Both results underscore the surprising functional freedom readily available to cells at the single-protein level. Copyright © 2012 Biophysical Society. Published by Elsevier Inc. All rights reserved.

  10. Pairwise contact energy statistical potentials can help to find probability of point mutations.

    Science.gov (United States)

    Saravanan, K M; Suvaithenamudhan, S; Parthasarathy, S; Selvaraj, S

    2017-01-01

    To adopt a particular fold, a protein requires several interactions between its amino acid residues. The energetic contribution of these residue-residue interactions can be approximated by extracting statistical potentials from known high resolution structures. Several methods based on statistical potentials extracted from unrelated proteins are found to make a better prediction of probability of point mutations. We postulate that the statistical potentials extracted from known structures of similar folds with varying sequence identity can be a powerful tool to examine probability of point mutation. By keeping this in mind, we have derived pairwise residue and atomic contact energy potentials for the different functional families that adopt the (α/β) 8 TIM-Barrel fold. We carried out computational point mutations at various conserved residue positions in yeast Triose phosphate isomerase enzyme for which experimental results are already reported. We have also performed molecular dynamics simulations on a subset of point mutants to make a comparative study. The difference in pairwise residue and atomic contact energy of wildtype and various point mutations reveals probability of mutations at a particular position. Interestingly, we found that our computational prediction agrees with the experimental studies of Silverman et al. (Proc Natl Acad Sci 2001;98:3092-3097) and perform better prediction than i Mutant and Cologne University Protein Stability Analysis Tool. The present work thus suggests deriving pairwise contact energy potentials and molecular dynamics simulations of functionally important folds could help us to predict probability of point mutations which may ultimately reduce the time and cost of mutation experiments. Proteins 2016; 85:54-64. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  11. Energy index decomposition methodology at the plant level

    Science.gov (United States)

    Kumphai, Wisit

    Scope and method of study. The dissertation explores the use of a high level energy intensity index as a facility-level energy performance monitoring indicator with a goal of developing a methodology for an economically based energy performance monitoring system that incorporates production information. The performance measure closely monitors energy usage, production quantity, and product mix and determines the production efficiency as a part of an ongoing process that would enable facility managers to keep track of and, in the future, be able to predict when to perform a recommissioning process. The study focuses on the use of the index decomposition methodology and explored several high level (industry, sector, and country levels) energy utilization indexes, namely, Additive Log Mean Divisia, Multiplicative Log Mean Divisia, and Additive Refined Laspeyres. One level of index decomposition is performed. The indexes are decomposed into Intensity and Product mix effects. These indexes are tested on a flow shop brick manufacturing plant model in three different climates in the United States. The indexes obtained are analyzed by fitting an ARIMA model and testing for dependency between the two decomposed indexes. Findings and conclusions. The results concluded that the Additive Refined Laspeyres index decomposition methodology is suitable to use on a flow shop, non air conditioned production environment as an energy performance monitoring indicator. It is likely that this research can be further expanded in to predicting when to perform a recommissioning process.

  12. Prediction of transmission loss through an aircraft sidewall using statistical energy analysis

    Science.gov (United States)

    Ming, Ruisen; Sun, Jincai

    1989-06-01

    The transmission loss of randomly incident sound through an aircraft sidewall is investigated using statistical energy analysis. Formulas are also obtained for the simple calculation of sound transmission loss through single- and double-leaf panels. Both resonant and nonresonant sound transmissions can be easily calculated using the formulas. The formulas are used to predict sound transmission losses through a Y-7 propeller airplane panel. The panel measures 2.56 m x 1.38 m and has two windows. The agreement between predicted and measured values through most of the frequency ranges tested is quite good.

  13. Spin energy levels in axial symmetry: spin 4

    Energy Technology Data Exchange (ETDEWEB)

    de Biasi, R S; Portella, P D [Instituto Militar de Engenharia, Rio de Janeiro (Brazil). Secao de Engenharia e Ciencia dos Materiais

    1979-01-01

    The spin energy levels in axial symmetry are presented, in graphical and tabular form, for a spin 4. The levels are calculated for five different angles between the applied field and the symmetry axis 0/sup 0/, 30/sup 0/, 45/sup 0/, 60 and 90/sup 0/.

  14. Spin energy levels in axial symmetry: spin 3/2

    Energy Technology Data Exchange (ETDEWEB)

    de Biasi, R S; Portella, P D [Instituto Militar de Engenharia, Rio de Janeiro (Brazil). Secao de Engenharia e Ciencia dos Materiais

    1977-01-01

    The spin energy levels in axial symmetry are presented, in graphical and tabular form, for a spin 3/2. The levels are calculated for five different angles between the applied field and the symmetry axis: 0/sup 0/, 30/sup 0/, 45/sup 0/, 60/sup 0/ and 90/sup 0/.

  15. Statistical equilibrium in cometary C2. IV. A 10 level model including singlet-triplet transitions

    International Nuclear Information System (INIS)

    Krishna Swamy, K.S.; O'dell, C.R.; Rice Univ., Houston, TX)

    1987-01-01

    Resonance fluorescence theory was used to calculate the population distribution in the energy states of the C2 molecule in comets. Ten electronic states, each with 14 vibrational states, were used in the calculations. These new calculations differ from earlier work in terms of additional electronic levels and the role of singlet-triplet transitions between the b and X levels. Since transition moments are not known, calculations are made of observable flux ratios for an array of possible values. Comparison with existing observations indicates that the a-X transition is very important, and there is marginal indication that the b-X transition is present. Swan band sequence flux ratios at large heliocentric distance are needed, as are accurate Mulliken/Swan and Phillips/Ballik-Ramsay (1963) observations. 29 references

  16. Energy statistics on one- and two-dwelling buildings in 1999

    International Nuclear Information System (INIS)

    2000-01-01

    The survey of energy statistics on one- and two-dwelling buildings in 1999 is based on a sample of 8264 buildings. The survey was carried out as a mail survey in January 2000. The non-response was 20 percent. The presentation provides data on energy consumption, number of one- and two-dwelling buildings, and heated floor spaces for the total population and for various subdivisions. More than one third of the one- and two-dwelling buildings are heated by electricity. About 17 percent are heated by a combination of firewood and electricity, and about 14 percent are heated by oil only. All of these heating types are decreasing, while heating by firewood/wood chips/pellets, heat pumps and distant heating are increasing

  17. Energy statistics for on one- and two-dwelling buildings in 2000

    International Nuclear Information System (INIS)

    2001-01-01

    The survey of energy statistics on one- and two-dwelling buildings in 2000 is based on a sample of 6531 buildings. The survey was carried out as a mail survey in January 2001. The non-response was 21 percent. The presentation provides data on energy consumption, number of one- and two-dwelling buildings, and heated floor spaces for the total population and for various subdivisions. More than one third of the one- and two-dwelling buildings are heated by electricity. About 18 percent are heated by a combination of firewood and electricity, and about 13 percent are heated by oil only. All of these heating types are decreasing, while heating by firewood/wood chips/pellets, heat pumps and distant heating are increasing

  18. Freezing and extreme-value statistics in a random energy model with logarithmically correlated potential

    International Nuclear Information System (INIS)

    Fyodorov, Yan V; Bouchaud, Jean-Philippe

    2008-01-01

    We investigate some implications of the freezing scenario proposed by Carpentier and Le Doussal (CLD) for a random energy model (REM) with logarithmically correlated random potential. We introduce a particular (circular) variant of the model, and show that the integer moments of the partition function in the high-temperature phase are given by the well-known Dyson Coulomb gas integrals. The CLD freezing scenario allows one to use those moments for extracting the distribution of the free energy in both high- and low-temperature phases. In particular, it yields the full distribution of the minimal value in the potential sequence. This provides an explicit new class of extreme-value statistics for strongly correlated variables, manifestly different from the standard Gumbel class. (fast track communication)

  19. Freezing and extreme-value statistics in a random energy model with logarithmically correlated potential

    Energy Technology Data Exchange (ETDEWEB)

    Fyodorov, Yan V [School of Mathematical Sciences, University of Nottingham, Nottingham NG72RD (United Kingdom); Bouchaud, Jean-Philippe [Science and Finance, Capital Fund Management 6-8 Bd Haussmann, 75009 Paris (France)

    2008-09-19

    We investigate some implications of the freezing scenario proposed by Carpentier and Le Doussal (CLD) for a random energy model (REM) with logarithmically correlated random potential. We introduce a particular (circular) variant of the model, and show that the integer moments of the partition function in the high-temperature phase are given by the well-known Dyson Coulomb gas integrals. The CLD freezing scenario allows one to use those moments for extracting the distribution of the free energy in both high- and low-temperature phases. In particular, it yields the full distribution of the minimal value in the potential sequence. This provides an explicit new class of extreme-value statistics for strongly correlated variables, manifestly different from the standard Gumbel class. (fast track communication)

  20. NATO Advanced Study Institute on Statistical Treatments for Estimation of Mineral and Energy Resources

    CERN Document Server

    Fabbri, A; Sinding-Larsen, R

    1988-01-01

    This volume contains the edited papers prepared by lecturers and participants of the NATO Advanced Study Institute on "Statistical Treatments for Estimation of Mineral and Energy Resources" held at II Ciocco (Lucca), Italy, June 22 - July 4, 1986. During the past twenty years, tremendous efforts have been made to acquire quantitative geoscience information from ore deposits, geochemical, geophys ical and remotely-sensed measurements. In October 1981, a two-day symposium on "Quantitative Resource Evaluation" and a three-day workshop on "Interactive Systems for Multivariate Analysis and Image Processing for Resource Evaluation" were held in Ottawa, jointly sponsored by the Geological Survey of Canada, the International Association for Mathematical Geology, and the International Geological Correlation Programme. Thirty scientists from different countries in Europe and North America were invited to form a forum for the discussion of quantitative methods for mineral and energy resource assessment. Since then, not ...

  1. Crossing statistic: Bayesian interpretation, model selection and resolving dark energy parametrization problem

    International Nuclear Information System (INIS)

    Shafieloo, Arman

    2012-01-01

    By introducing Crossing functions and hyper-parameters I show that the Bayesian interpretation of the Crossing Statistics [1] can be used trivially for the purpose of model selection among cosmological models. In this approach to falsify a cosmological model there is no need to compare it with other models or assume any particular form of parametrization for the cosmological quantities like luminosity distance, Hubble parameter or equation of state of dark energy. Instead, hyper-parameters of Crossing functions perform as discriminators between correct and wrong models. Using this approach one can falsify any assumed cosmological model without putting priors on the underlying actual model of the universe and its parameters, hence the issue of dark energy parametrization is resolved. It will be also shown that the sensitivity of the method to the intrinsic dispersion of the data is small that is another important characteristic of the method in testing cosmological models dealing with data with high uncertainties

  2. Accelerator driven reactors, - the significance of the energy distribution of spallation neutrons on the neutron statistics

    Energy Technology Data Exchange (ETDEWEB)

    Fhager, V

    2000-01-01

    In order to make correct predictions of the second moment of statistical nuclear variables, such as the number of fissions and the number of thermalized neutrons, the dependence of the energy distribution of the source particles on their number should be considered. It has been pointed out recently that neglecting this number dependence in accelerator driven systems might result in bad estimates of the second moment, and this paper contains qualitative and quantitative estimates of the size of these efforts. We walk towards the requested results in two steps. First, models of the number dependent energy distributions of the neutrons that are ejected in the spallation reactions are constructed, both by simple assumptions and by extracting energy distributions of spallation neutrons from a high-energy particle transport code. Then, the second moment of nuclear variables in a sub-critical reactor, into which spallation neutrons are injected, is calculated. The results from second moment calculations using number dependent energy distributions for the source neutrons are compared to those where only the average energy distribution is used. Two physical models are employed to simulate the neutron transport in the reactor. One is analytical, treating only slowing down of neutrons by elastic scattering in the core material. For this model, equations are written down and solved for the second moment of thermalized neutrons that include the distribution of energy of the spallation neutrons. The other model utilizes Monte Carlo methods for tracking the source neutrons as they travel inside the reactor material. Fast and thermal fission reactions are considered, as well as neutron capture and elastic scattering, and the second moment of the number of fissions, the number of neutrons that leaked out of the system, etc. are calculated. Both models use a cylindrical core with a homogenous mixture of core material. Our results indicate that the number dependence of the energy

  3. Accelerator driven reactors, - the significance of the energy distribution of spallation neutrons on the neutron statistics

    International Nuclear Information System (INIS)

    Fhager, V.

    2000-01-01

    In order to make correct predictions of the second moment of statistical nuclear variables, such as the number of fissions and the number of thermalized neutrons, the dependence of the energy distribution of the source particles on their number should be considered. It has been pointed out recently that neglecting this number dependence in accelerator driven systems might result in bad estimates of the second moment, and this paper contains qualitative and quantitative estimates of the size of these efforts. We walk towards the requested results in two steps. First, models of the number dependent energy distributions of the neutrons that are ejected in the spallation reactions are constructed, both by simple assumptions and by extracting energy distributions of spallation neutrons from a high-energy particle transport code. Then, the second moment of nuclear variables in a sub-critical reactor, into which spallation neutrons are injected, is calculated. The results from second moment calculations using number dependent energy distributions for the source neutrons are compared to those where only the average energy distribution is used. Two physical models are employed to simulate the neutron transport in the reactor. One is analytical, treating only slowing down of neutrons by elastic scattering in the core material. For this model, equations are written down and solved for the second moment of thermalized neutrons that include the distribution of energy of the spallation neutrons. The other model utilizes Monte Carlo methods for tracking the source neutrons as they travel inside the reactor material. Fast and thermal fission reactions are considered, as well as neutron capture and elastic scattering, and the second moment of the number of fissions, the number of neutrons that leaked out of the system, etc. are calculated. Both models use a cylindrical core with a homogenous mixture of core material. Our results indicate that the number dependence of the energy

  4. Exploring Factors Related to Completion of an Online Undergraduate-Level Introductory Statistics Course

    Science.gov (United States)

    Zimmerman, Whitney Alicia; Johnson, Glenn

    2017-01-01

    Data were collected from 353 online undergraduate introductory statistics students at the beginning of a semester using the Goals and Outcomes Associated with Learning Statistics (GOALS) instrument and an abbreviated form of the Statistics Anxiety Rating Scale (STARS). Data included a survey of expected grade, expected time commitment, and the…

  5. Statistical analysis to assess automated level of suspicion scoring methods in breast ultrasound

    Science.gov (United States)

    Galperin, Michael

    2003-05-01

    A well-defined rule-based system has been developed for scoring 0-5 the Level of Suspicion (LOS) based on qualitative lexicon describing the ultrasound appearance of breast lesion. The purposes of the research are to asses and select one of the automated LOS scoring quantitative methods developed during preliminary studies in benign biopsies reduction. The study has used Computer Aided Imaging System (CAIS) to improve the uniformity and accuracy of applying the LOS scheme by automatically detecting, analyzing and comparing breast masses. The overall goal is to reduce biopsies on the masses with lower levels of suspicion, rather that increasing the accuracy of diagnosis of cancers (will require biopsy anyway). On complex cysts and fibroadenoma cases experienced radiologists were up to 50% less certain in true negatives than CAIS. Full correlation analysis was applied to determine which of the proposed LOS quantification methods serves CAIS accuracy the best. This paper presents current results of applying statistical analysis for automated LOS scoring quantification for breast masses with known biopsy results. It was found that First Order Ranking method yielded most the accurate results. The CAIS system (Image Companion, Data Companion software) is developed by Almen Laboratories and was used to achieve the results.

  6. Statistical assessment of the 137Cs levels of the Chernihiv oblast's milk

    International Nuclear Information System (INIS)

    Lev, T.D.; Zakhutska, O.M.

    2004-01-01

    The article deals with research directed on overcoming the consequences of the Chornobyl accident at the territory of Ukraine. Results are considered of the use of the long-normal distribution law to evaluate results of 137Cs milk contamination. Critical farms of Chernihiv oblast, where agreeing criteria for assessing the primary data on milk contamination were applied, became the object of the study. An algorithm was applied to calculate factual and forecast repetitions of gradations according to the stages of statistical processing of milk samples contaminated with 137Cs. Results of the milk contamination analysis at a later stage (1991-2001)are described by the long-normal distribution law which can be used to forecast for the subsequent years. The maximum repetability of the gradations of the contaminated milk (from 10 to 40 Bq/l) is determined for factual and forecast frequencies of the levels of contamination thereof. The results of the study are proposed to be used while taking measures directed on diminishing the levels of contamination of agricultural products with 137Cs

  7. Statistical model of a flexible inextensible polymer chain: The effect of kinetic energy

    Science.gov (United States)

    Pergamenshchik, V. M.; Vozniak, A. B.

    2017-01-01

    Because of the holonomic constraints, the kinetic energy contribution in the partition function of an inextensible polymer chain is difficult to find, and it has been systematically ignored. We present the first thermodynamic calculation incorporating the kinetic energy of an inextensible polymer chain with the bending energy. To explore the effect of the translation-rotation degrees of freedom, we propose and solve a statistical model of a fully flexible chain of N +1 linked beads which, in the limit of smooth bending, is equivalent to the well-known wormlike chain model. The partition function with the kinetic and bending energies and correlations between orientations of any pair of links and velocities of any pair of beads are found. This solution is precise in the limits of small and large rigidity-to-temperature ratio b /T . The last exact solution is essential as even very "harmless" approximation results in loss of the important effects when the chain is very rigid. For very high b /T , the orientations of different links become fully correlated. Nevertheless, the chain does not go over into a hard rod even in the limit b /T →∞ : While the velocity correlation length diverges, the correlations themselves remain weak and tend to the value ∝T /(N +1 ). The N dependence of the partition function is essentially determined by the kinetic energy contribution. We demonstrate that to obtain the correct energy and entropy in a constrained system, the T derivative of the partition function has to be applied before integration over the constraint-setting variable.

  8. A statistical approach to evaluate flood risk at the regional level: an application to Italy

    Science.gov (United States)

    Rossi, Mauro; Marchesini, Ivan; Salvati, Paola; Donnini, Marco; Guzzetti, Fausto; Sterlacchini, Simone; Zazzeri, Marco; Bonazzi, Alessandro; Carlesi, Andrea

    2016-04-01

    Floods are frequent and widespread in Italy, causing every year multiple fatalities and extensive damages to public and private structures. A pre-requisite for the development of mitigation schemes, including financial instruments such as insurance, is the ability to quantify their costs starting from the estimation of the underlying flood hazard. However, comprehensive and coherent information on flood prone areas, and estimates on the frequency and intensity of flood events, are not often available at scales appropriate for risk pooling and diversification. In Italy, River Basins Hydrogeological Plans (PAI), prepared by basin administrations, are the basic descriptive, regulatory, technical and operational tools for environmental planning in flood prone areas. Nevertheless, such plans do not cover the entire Italian territory, having significant gaps along the minor hydrographic network and in ungauged basins. Several process-based modelling approaches have been used by different basin administrations for the flood hazard assessment, resulting in an inhomogeneous hazard zonation of the territory. As a result, flood hazard assessments expected and damage estimations across the different Italian basin administrations are not always coherent. To overcome these limitations, we propose a simplified multivariate statistical approach for the regional flood hazard zonation coupled with a flood impact model. This modelling approach has been applied in different Italian basin administrations, allowing a preliminary but coherent and comparable estimation of the flood hazard and the relative impact. Model performances are evaluated comparing the predicted flood prone areas with the corresponding PAI zonation. The proposed approach will provide standardized information (following the EU Floods Directive specifications) on flood risk at a regional level which can in turn be more readily applied to assess flood economic impacts. Furthermore, in the assumption of an appropriate

  9. A statistical investigation of wind characteristics and wind energy potential based on the Weibull and Rayleigh models in Rwanda

    Energy Technology Data Exchange (ETDEWEB)

    Safari, Bonfils; Gasore, Jimmy [Department of Physics, National University of Rwanda, P.O. Box 117, Huye, South Province (Rwanda)

    2010-12-15

    A wind energy system converts the kinetic energy of the wind into mechanical or electrical energy that can be harnessed for practical uses and transform the economy of rural areas where access to water and electricity is very restricted and industry is almost nonexistent in most of the developing countries like Rwanda. Assessing wind power potential for a location is an imperative requirement before making a decision for the installation of windmills or a wind electric generator and evaluating plans for relating projects. The aim of the present study was to evaluate the potential of wind resource in Rwanda and to constitute a database for the users of the wind power. A time series of hourly daily measured wind speed and wind direction for the period between 1974 and 1993 on five main Rwandan meteorological stations was provided by the National Meteorology Department. Statistical methods applying Weibull and Rayleigh distribution were presented to evaluate the wind speed characteristics and the wind power potential at a height of 10 m above ground level using hourly monthly average data. Those characteristics were extrapolated for higher levels in altitude. The results give a global picture of the distribution of the wind potential in different locations of Rwanda. (author)

  10. Atomic energy-level and Grotrian diagrams. Vol. 4

    International Nuclear Information System (INIS)

    Bashkin, S.; Stoner, J.O. Jr.

    1982-01-01

    This is the fifth in a series of volumes that present diagrammatically the spectra of atoms and monatomic ions. All observed transitions and all known levels of manganese are included. All wavelengths are given in angstroms in vacuum below 2000 A, in air above 2000 A. Energies of levels are specified in wavenumbers (cm -1 ), kcm -1 (1 X 10 3 cm -1 ), or Mcm -1 (1 X 10 6 cm -1 ). For energies, all experimentally significant figures are included; for wavelengths, we usually include two decimal places (three for the shortest wavelengths). Descriptions of levels are based in most cases upon the largest percentage contributions of elementary coupling arrangements to the levels. In a few instances several different descriptions of the same levels are presented. (Auth.)

  11. Energy levels and radiative rates for transitions in Ti VI

    International Nuclear Information System (INIS)

    Aggarwal, K M; Keenan, F P; Msezane, A Z

    2013-01-01

    We report on calculations of energy levels, radiative rates, oscillator strengths and line strengths for transitions among the lowest 253 levels of the (1s 2 2s 2 2p 6 ) 3s 2 3p 5 , 3s3p 6 , 3s 2 3p 4 3d, 3s3p 5 3d, 3s 2 3p 3 3d 2 , 3s 2 3p 4 4s, 3s 2 3p 4 4p and 3s 2 3p 4 4d configurations of Ti VI. The general-purpose relativistic atomic structure package and flexible atomic code are adopted for the calculations. Radiative rates, oscillator strengths and line strengths are reported for all electric dipole (E1), magnetic dipole (M1), electric quadrupole (E2) and magnetic quadrupole (M2) transitions among the 253 levels, although calculations have been performed for a much larger number of levels. Comparisons are made with existing available results and the accuracy of the data is assessed. Additionally, lifetimes for all 253 levels are listed, although comparisons with other theoretical results are limited to only 88 levels. Our energy levels are estimated to be accurate to better than 1% (within 0.03 Ryd), whereas results for other parameters are probably accurate to better than 20%. A reassessment of the energy level data on the National Institute of Standards and Technology website for Ti VI is suggested. (paper)

  12. Ground level enhancement (GLE) energy spectrum parameters model

    Science.gov (United States)

    Qin, G.; Wu, S.

    2017-12-01

    We study the ground level enhancement (GLE) events in solar cycle 23 with the four energy spectra parameters, the normalization parameter C, low-energy power-law slope γ 1, high-energy power-law slope γ 2, and break energy E0, obtained by Mewaldt et al. 2012 who fit the observations to the double power-law equation. we divide the GLEs into two groups, one with strong acceleration by interplanetary (IP) shocks and another one without strong acceleration according to the condition of solar eruptions. We next fit the four parameters with solar event conditions to get models of the parameters for the two groups of GLEs separately. So that we would establish a model of energy spectrum for GLEs for the future space weather prediction.

  13. Low energy level density and surface instabilities in heavy transition nuclei

    International Nuclear Information System (INIS)

    Wieclawik, W. de; Foucher, R.; Dionisio, J.S.; Vieu, C.; Hoglund, A.; Watzig, W.

    1975-01-01

    A statistical analysis of Au, Pt, Hg nuclear levels was performed with Ericson's method. The odd mass gold experimental number of levels distributions are compared to the theoretical distributions corresponding to vibrational (Alaga and Kisslinger-Sorensen) and rotational (Stephens, Meyer-ter-Vehn) models. The Alaga model gives the most complete description of 193 Au, 195 Au levels and fits the lowest part of Gilbert-Cameron high energy distributions (deduced from the statistical model and neutron capture data). The Ericson's method shows other interesting features of Pt and Hg isotopes (i.e. level density dependence on nuclear shape and pairing correlations, evidence for phase transitions). Consequently, this method is a useful tool for guiding experimental as well as theoretical investigations of transition nuclei [fr

  14. Statistical characterization of global Sea Surface Salinity for SMOS level 3 and 4 products

    Science.gov (United States)

    Gourrion, J.; Aretxabaleta, A. L.; Ballabrera, J.; Mourre, B.

    2009-04-01

    The Soil Moisture and Ocean Salinity (SMOS) mission of the European Space Agency will soon provide sea surface salinity (SSS) estimates to the scientific community. Because of the numerous geophysical contamination sources and the instrument complexity, the salinity products will have a low signal to noise ratio at level 2 (individual estimates??) that is expected to increase up to mission requirements (0.1 psu) at level 3 (global maps with regular distribution) after spatio-temporal accumulation of the observations. Geostatistical methods such as Optimal Interpolation are being implemented at the level 3/4 production centers to operate this noise reduction step. The methodologies require auxiliary information about SSS statistics that, under Gaussian assumption, consist in the mean field and the covariance of the departures from it. The present study is a contribution to the definition of the best estimates for mean field and covariances to be used in the near-future SMOS level 3 and 4 products. We use complementary information from sparse in-situ observations and imperfect outputs from state-of-art model simulations. Various estimates of the mean field are compared. An alternative is the use of a SSS climatology such as the one provided by the World Ocean Atlas 2005. An historical SSS dataset from the World Ocean Database 2005 is reanalyzed and combined with the recent global observations obtained by the Array for Real-Time Geostrophic Oceanography (ARGO). Regional tendencies in the long-term temporal evolution of the near-surface ocean salinity are evident, suggesting that the use of a SSS climatology to describe the current mean field may introduce biases of magnitude similar to the precision goal. Consequently, a recent SSS dataset may be preferred to define the mean field needed for SMOS level 3 and 4 production. The in-situ observation network allows a global mapping of the low frequency component of the variability, i.e. decadal, interannual and seasonal

  15. Energy level alignment at interfaces in organic photovoltaic devices

    International Nuclear Information System (INIS)

    Opitz, Andreas; Frisch, Johannes; Schlesinger, Raphael; Wilke, Andreas; Koch, Norbert

    2013-01-01

    Highlights: ► Energy level alignment is crucial for organic solar cell efficiency. ► Photoelectron spectroscopy can reliably determine energy levels of organic material interfaces. ► Care must be taken to avoid even subtle sample damage. -- Abstract: The alignment of energy levels at interfaces in organic photovoltaic devices is crucial for their energy conversion efficiency. Photoelectron spectroscopy (PES) is a well-established and widely used technique for determining the electronic structure of materials; at the same time PES measurements of conjugated organic materials often pose significant challenges, such as obtaining sufficiently defined sample structures and radiation-induced damage of the organic layers. Here we report how these challenges can be tackled to unravel the energy levels at interfaces in organic photovoltaic devices, i.e., electrode/organic and organic/organic interfaces. The electronic structure across entire photovoltaic multilayer devices can thus be reconciled. Finally, general considerations for correlating the electronic structure and the photovoltaic performance of devices will be discussed

  16. URBAN FEATURES AND ENERGY CONSUMPTION AT LOCAL LEVEL

    Directory of Open Access Journals (Sweden)

    Ali Soltani

    2012-12-01

    Full Text Available There has been a growing interest in discovering the human effects on the environment and energy consumption in recent decades. It is estimated that the share of energy consumed in transportation and housing systems are around 20 and 30 percent of total energy consumption respectively. Furthermore, the residential greenhouse emissions depend on urban form and structure. This paper explores the effects of urban features on residential energy consumption at neighborhood level using data collected through household questionnaire (n=140. Two residential districts in metropolitan Shiraz, south of Iran, were selected as case study areas. Different features of two areas were compared including building density, typology, housing location, parcel size, floor area and construction materials. Ordinary linear regression was used to discover the impact of explanatory variables on energy consumption. It was found that some physical variables such as parcel size, setback and number of floors played significant roles in explaining the variances exist in energy use level. The results can be used by governmental agencies to modify land use policies and subdivision rules in hope of saving energy and achieving a sustainable community.

  17. The influence of distributed generation penetration levels on energy markets

    International Nuclear Information System (INIS)

    Vahl, Fabrício Peter; Rüther, Ricardo; Casarotto Filho, Nelson

    2013-01-01

    Planning of national energy policies brings new dilemmas with the introduction of distributed generators (DG). Economic theory suggests that a perfectly competitive market would lead to efficient pricing. In the absence of competition, regulators play a fundamental role in attracting reasonably priced finance in order to maintain, refurbish and increase the infrastructure and provide services at a reasonable cost. Energy market price equilibrium is mainly dependent on suppliers, generators, energy sources and demand, represented by conventional utility grid users. Its behavior is similar to that of other commodities. As generation becomes less centralized with the increasing economic viability of renewable energy sources, new suppliers are being connected to the grid. Such evolution means the transition from a monopolistic market to a broader and more open environment, with an increasing number of competitors. We make use of variational inequalities to model a hypothetical DG market in different scenarios, from monopoly, to oligopoly, to open market. Such an approach enables different equilibrium outcomes due to different DG penetration levels. Based on these findings, we argue that energy policies for such markets must be developed according to each specific stage of the grid's lifecycle. We show how energy policies and market regulations may affect such a transition, which may be catastrophic if not managed properly, and which is dependent on the energy mix. -- Highlights: •DG affects energy markets depending on technologies, penetration and infrastructure. •Energy prices vary when the market moves from centralized to several suppliers. •Variational inequalities are presented to simulate a market under such transitions. •The increase of DG penetration level may present different energy prices variation. •If technical and political issues of smart grids are not improved, markets may crash

  18. Cost-optimal levels for energy performance requirements

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund; Aggerholm, Søren; Kluttig-Erhorn, Heike

    2011-01-01

    The CA conducted a study on experiences and challenges for setting cost optimal levels for energy performance requirements. The results were used as input by the EU Commission in their work of establishing the Regulation on a comparative methodology framework for calculating cost optimal levels...... of minimum energy performance requirements. In addition to the summary report released in August 2011, the full detailed report on this study is now also made available, just as the EC is about to publish its proposed Regulation for MS to apply in their process to update national building requirements....

  19. National energy peak leveling program (NEPLP). Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    This three-volume report is responsive to the requirements of Contract E (04-3)-1152 to provide a detailed methodology, to include management, technology, and socio-economic aspects, of a voluntary community program of computer-assisted peak load leveling and energy conservation in commercial community facilities. The demonstration project established proof-of-concept in reducing the kW-demand peak by the unofficial goal of 10%, with concurrent kWh savings. This section of the three volume report is a final report appendix with information on the National Energy Peak Leveling Program (NEPLP).

  20. The Low Energy Level Structure of {sup 191}lr

    Energy Technology Data Exchange (ETDEWEB)

    Malmskog, S G; Berg, V [AB Atomenergi, Nykoeping (Sweden); [Inst. of Physics, U niv. of Stockholm (Sweden); Baecklin, A; Hedin, G [Inst. of Physics, Univ. of Upp sala (Sweden)

    1970-02-15

    The decay of {sup 191}Pt to {sup 191}Ir has been investigated using Ge(Li)-detectors and a double focusing beta spectrometer. 35 transitions were observed and most of them were placed in a level scheme. Special attention was given to the low energy level band structure. Several multipolarity mixing ratios were determined from L-subshell ratio measurements. Using the delayed coincidence technique the half-life of the 179.05 keV level was measured to 40 {+-} 12 psec. The low level decay properties are discussed in terms of the Nilsson model with the inclusion of Coriolis coupling.

  1. Estimation of background noise level on seismic station using statistical analysis for improved analysis accuracy

    Science.gov (United States)

    Han, S. M.; Hahm, I.

    2015-12-01

    We evaluated the background noise level of seismic stations in order to collect the observation data of high quality and produce accurate seismic information. Determining of the background noise level was used PSD (Power Spectral Density) method by McNamara and Buland (2004) in this study. This method that used long-term data is influenced by not only innate electronic noise of sensor and a pulse wave resulting from stabilizing but also missing data and controlled by the specified frequency which is affected by the irregular signals without site characteristics. It is hard and inefficient to implement process that filters out the abnormal signal within the automated system. To solve these problems, we devised a method for extracting the data which normally distributed with 90 to 99% confidence intervals at each period. The availability of the method was verified using 62-seismic stations with broadband and short-period sensors operated by the KMA (Korea Meteorological Administration). Evaluation standards were NHNM (New High Noise Model) and NLNM (New Low Noise Model) published by the USGS (United States Geological Survey). It was designed based on the western United States. However, Korean Peninsula surrounded by the ocean on three sides has a complicated geological structure and a high population density. So, we re-designed an appropriate model in Korean peninsula by statistically combined result. The important feature is that secondary-microseism peak appeared at a higher frequency band. Acknowledgements: This research was carried out as a part of "Research for the Meteorological and Earthquake Observation Technology and Its Application" supported by the 2015 National Institute of Meteorological Research (NIMR) in the Korea Meteorological Administration.

  2. Longitudinal review of state-level accident statistics for carriers of interstate freight

    International Nuclear Information System (INIS)

    Saricks, C.; Kvitek, T.

    1994-03-01

    State-level accident rates by mode of freight transport have been developed and refined for application to the US Department of Energy's (DOE's) environmental mitigation program, which may involve large-quantity shipments of hazardous and mixed wastes from DOE facilities. These rates reflect multi-year data for interstate-registered highway earners, American Association of Railroads member carriers, and coastal and internal waterway barge traffic. Adjustments have been made to account for the share of highway combination-truck traffic actually attributable to interstate-registered carriers and for duplicate or otherwise inaccurate entries in the public-use accident data files used. State-to-state variation in rates is discussed, as is the stability of rates over time. Computed highway rates have been verified with actual carriers of high- and low-level nuclear materials, and the most recent truck accident data have been used, to ensure that the results are of the correct order of magnitude. Study conclusions suggest that DOE use the computed rates for the three modes until (1) improved estimation techniques for highway combination-truck miles by state become available; (2) continued evolution of the railroad industry significantly increases the consolidation of interstate rail traffic onto fewer high-capacity trunk lines; or (3) a large-scale off-site waste shipment campaign is imminent

  3. Evaluation of excitation energy and spin in fission fragments using the statistical model, and the FIPPS project

    International Nuclear Information System (INIS)

    Faust, H.; Koester, U.; Kessedjian, G.; Sage, C.; Chebboubi, A.

    2013-01-01

    We review the statistical model and its application for the process of nuclear fission. The expressions for excitation energy and spin distributions for the individual fission fragments are given. We will finally emphasize the importance of measuring prompt gamma decay to further test the statistical model in nuclear fission with the FIPPS project. (authors)

  4. Energy level alignment at Co/AlOx/pentacene interfaces

    NARCIS (Netherlands)

    Popinciuc, M.; Jonkman, H. T.; van Wees, B. J.

    2007-01-01

    X-ray and ultraviolet photoemission spectroscopy (XPS and UPS) experiments were performed in order to study the energy level alignment and electronic structure at Co/AlOx/pentacene interfaces as a function of the aluminum oxide (AlOx) tunnel barrier thickness and the oxidation state of Co. XPS was

  5. Investigation of the energy levels of 38AR

    International Nuclear Information System (INIS)

    Waanders, F.B.

    1975-07-01

    In this project information on the energy levels of 38 Ar was obtained by means of the (p,γ) reaction. The 1,1 MeV Cockroft-Walton accelerator of the Potchefstroom University for CHE was used to produce the proton beam while a 80 cm 3 Ge(Li) detector was used to detect the gamma-rays. Precise gamma-branchings were determined for 50 bound levels, of which four have not previously been determined. These branchings were obtained from the 28 resonances studied in the 37 Cl(p,γ) 38 Ar reaction. The resonance with a proton energy of (592 plus minus 3) keV was not detected previously. The resonance energies, Q-value and energies of the bound levels used in this project were taken from the study done by Alderliesten. The mean lifetimes of a few bound levels of 38 Ar were measured by means of the doppler shift attenuation method. The results concerning the bound states and mean lifetimes are in good agreement with previous experiments. Limitations on the spin and parities of 19 (p,γ) resonances have been set by means of Weisskopf estimates. Only those cases for which the spin could be limited to two values are discussed in the text. A summary of experimental data obtained on 38 Ar is compared with the results from shellmodel calculations done by various workers. A short discussion on the analogue states in 38 Ar is also given [af

  6. Coulomb displacement energies between analog levels for 44 < = A < = 239

    International Nuclear Information System (INIS)

    Antony, M.S.; Britz, J.; Pape, A.

    1985-08-01

    Experimental Coulomb displacement energie ΔEsub(C) between isobaric analog levels are tabulated for 44 <- A <- 239, extending recent work in which similar data were presented for 3 <- A <- 45. An overall parametrization in anti-Z/A sup(1/3) and uniform radius parameters rsub(o) are given

  7. Degeneracy of energy levels of pseudo-Gaussian oscillators

    International Nuclear Information System (INIS)

    Iacob, Theodor-Felix; Iacob, Felix; Lute, Marina

    2015-01-01

    We study the main features of the isotropic radial pseudo-Gaussian oscillators spectral properties. This study is made upon the energy levels degeneracy with respect to orbital angular momentum quantum number. In a previous work [6] we have shown that the pseudo-Gaussian oscillators belong to the class of quasi-exactly solvable models and an exact solution has been found

  8. Net energy levels on the lipid profile of pork

    Directory of Open Access Journals (Sweden)

    Stephan Alexander da Silva Alencar

    2017-09-01

    Full Text Available ABSTRACT: This study was conducted to evaluate the effects of net energy levels on the lipid profile of adipose tissue and muscle of swines. A total of 90 animals, with initial weight of 71.94±4.43kg, were used, and distributed in a randomized block design in five net energy levels (2,300, 2,425, 2,550, 2,675, and 2,800Kcal kg-1 feed, with nine replicates and two animals per experimental unit. Lipid profiles of adipose tissue and muscle were analyzed using gas chromatography. Increasing the levels of net energy using soybean oil, improved the lipid profile of adipose tissue and muscle, increased linearly (P<0.05 the concentrations of polyunsaturated fatty acids, especially linoleic and α-linolenic acid, reduced linearly (P<0.05 the monounsaturated and saturated fatty acids and omega 6: omega 3. In adipose tissue was observed linear reduction (P<0.05 of atherogenic and thrombogenic indexes. In conclusion, increasing the level of net energy of the diet using soybean oil improved the lipid profile of adipose tissue and muscle.

  9. Energy level alignment symmetry at Co/pentacene/Co interfaces

    NARCIS (Netherlands)

    Popinciuc, M.; Jonkman, H. T.; van Wees, B. J.

    2006-01-01

    We have employed x-ray and ultraviolet photoemission spectroscopies (XPS and UPS) to study the energy level alignment and electronic structure at the Co/pentacene/Co interfaces. In the case of pentacene deposition on Co we found an interfacial dipole of about 1.05 eV and a hole injection barrier of

  10. Dietary energy level for optimum productivity and carcass ...

    African Journals Online (AJOL)

    A study was conducted to determine dietary energy levels for optimum productivity and carcass characteristics of indigenous Venda chickens raised in closed confinement. Four dietary treatments were considered in the first phase (1 to 7 weeks) on two hundred day-old unsexed indigenous Venda chicks indicated as EVS1, ...

  11. THE COMPARATIVE ANALYSIS OF TWO DIFFERENT STATISTICAL DISTRIBUTIONS USED TO ESTIMATE THE WIND ENERGY POTENTIAL

    Directory of Open Access Journals (Sweden)

    Mehmet KURBAN

    2007-01-01

    Full Text Available In this paper, the wind energy potential of the region is analyzed with Weibull and Reyleigh statistical distribution functions by using the wind speed data measured per 15 seconds in July, August, September, and October of 2005 at 10 m height of 30-m observation pole in the wind observation station constructed in the coverage of the scientific research project titled "The Construction of Hybrid (Wind-Solar Power Plant Model by Determining the Wind and Solar Potential in the Iki Eylul Campus of A.U." supported by Anadolu University. The Maximum likelihood method is used for finding the parameters of these distributions. The conclusion of the analysis for the months taken represents that the Weibull distribution models the wind speeds better than the Rayleigh distribution. Furthermore, the error rate in the monthly values of power density computed by using the Weibull distribution is smaller than the values by Rayleigh distribution.

  12. A Statistical Analysis of the Economic Drivers of Battery Energy Storage in Commercial Buildings: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Long, Matthew; Simpkins, Travis; Cutler, Dylan; Anderson, Katie

    2016-11-01

    There is significant interest in using battery energy storage systems (BESS) to reduce peak demand charges, and therefore the life cycle cost of electricity, in commercial buildings. This paper explores the drivers of economic viability of BESS in commercial buildings through statistical analysis. A sample population of buildings was generated, a techno-economic optimization model was used to size and dispatch the BESS, and the resulting optimal BESS sizes were analyzed for relevant predictor variables. Explanatory regression analyses were used to demonstrate that peak demand charges are the most significant predictor of an economically viable battery, and that the shape of the load profile is the most significant predictor of the size of the battery.

  13. Application of a Bayesian algorithm for the Statistical Energy model updating of a railway coach

    DEFF Research Database (Denmark)

    Sadri, Mehran; Brunskog, Jonas; Younesian, Davood

    2016-01-01

    into account based on published data on comparison between experimental and theoretical results, so that the variance of the theory is estimated. The Monte Carlo Metropolis Hastings algorithm is employed to estimate the modified values of the parameters. It is shown that the algorithm can be efficiently used......The classical statistical energy analysis (SEA) theory is a common approach for vibroacoustic analysis of coupled complex structures, being efficient to predict high-frequency noise and vibration of engineering systems. There are however some limitations in applying the conventional SEA...... the performance of the proposed strategy, the SEA model updating of a railway passenger coach is carried out. First, a sensitivity analysis is carried out to select the most sensitive parameters of the SEA model. For the selected parameters of the model, prior probability density functions are then taken...

  14. Data analysis in high energy physics a practical guide to statistical methods

    CERN Document Server

    Behnke, Olaf; Kröninger, Kevin; Schott, Grégory; Schörner-Sadenius, Thomas

    2013-01-01

    This practical guide covers the most essential statistics-related tasks and problems encountered in high-energy physics data analyses. It addresses both advanced students entering the field of particle physics as well as researchers looking for a reliable source on optimal separation of signal and background, determining signals or estimating upper limits, correcting the data for detector effects and evaluating systematic uncertainties. Each chapter is dedicated to a single topic and supplemented by a substantial number of both paper and computer exercises related to real experiments, with the solutions provided at the end of the book along with references. A special feature of the book are the analysis walk-throughs used to illustrate the application of the methods discussed beforehand. The authors give examples of data analysis, referring to real problems in HEP, and display the different stages of data analysis in a descriptive manner. The accompanying website provides more algorithms as well as up-to-date...

  15. Nuclear Statistical Equilibrium for compact stars: modelling the nuclear energy functional

    International Nuclear Information System (INIS)

    Aymard, Francois

    2015-01-01

    The core collapse supernova is one of the most powerful known phenomena in the universe. It results from the explosion of very massive stars after they have burnt all their fuel. The hot compact remnant, the so-called proto-neutron star, cools down to become an inert catalyzed neutron star. The dynamics and structure of compact stars, that is core collapse supernovae, proto-neutron stars and neutron stars, are still not fully understood and are currently under active research, in association with astrophysical observations and nuclear experiments. One of the key components for modelling compact stars concerns the Equation of State. The task of computing a complete realistic consistent Equation of State for all such stars is challenging because a wide range of densities, proton fractions and temperatures is spanned. This thesis deals with the microscopic modelling of the structure and internal composition of baryonic matter with nucleonic degrees of freedom in compact stars, in order to obtain a realistic unified Equation of State. In particular, we are interested in a formalism which can be applied both at sub-saturation and super-saturation densities, and which gives in the zero temperature limit results compatible with the microscopic Hartree-Fock-Bogoliubov theory with modern realistic effective interactions constrained on experimental nuclear data. For this purpose, we present, for sub-saturated matter, a Nuclear Statistical Equilibrium model which corresponds to a statistical superposition of finite configurations, the so-called Wigner-Seitz cells. Each cell contains a nucleus, or cluster, embedded in a homogeneous electron gas as well as a homogeneous neutron and proton gas. Within each cell, we investigate the different components of the nuclear energy of clusters in interaction with gases. The use of the nuclear mean-field theory for the description of both the clusters and the nucleon gas allows a theoretical consistency with the treatment at saturation

  16. INSTITUTIONAL MANAGEMENT OF EUROPEAN STATISTICS AND OF THEIR QUALITY - CURRENT CONCERNS AT EUROPEAN LEVEL

    Directory of Open Access Journals (Sweden)

    Daniela ŞTEFĂNESCU

    2011-08-01

    Full Text Available The issues referring to official statistics quality and reliability became the main topics of debates as far as statistical governance in Europe is concerned. The Council welcomed the Commission Communication to the European Parliament and to the Council « Towards robust quality management for European Statistics » (COM 211, appreciating that the approach and the objective of the strategy would confer the European Statistical System (ESS the quality management framework for the coordination of consolidated economic policies. The Council pointed out that the European Statistical System management was improved during recent years, that progress was noticed in relation with high quality statistics production and dissemination within the European Union, but has also noticed that, in the context of recent financial crisis, certain weaknesses were identified, particularly related to quality management general framework.„Greece Case” proved that progresses were not enough for guaranteeing the complete independence of national statistical institutes and entailed the need for further consolidating ESS governance. Several undertakings are now in the preparatory stage, in accordance with the Commission Communication; these actions are welcomed, but the question arise: are these sufficient for definitively solving the problem?The paper aims to go ahead in the attempt of identifying a different way, innovative (courageous! on the long run, towards an advanced institutional structure of ESS, by setting up the European System of Statistical Institutes, similar to the European System of Central Banks, that would require a change in the Treaty.

  17. Statistical analysis of the electric energy production from photovoltaic conversion using mobile and fixed constructions

    Science.gov (United States)

    Bugała, Artur; Bednarek, Karol; Kasprzyk, Leszek; Tomczewski, Andrzej

    2017-10-01

    The paper presents the most representative - from the three-year measurement time period - characteristics of daily and monthly electricity production from a photovoltaic conversion using modules installed in a fixed and 2-axis tracking construction. Results are presented for selected summer, autumn, spring and winter days. Analyzed measuring stand is located on the roof of the Faculty of Electrical Engineering Poznan University of Technology building. The basic parameters of the statistical analysis like mean value, standard deviation, skewness, kurtosis, median, range, or coefficient of variation were used. It was found that the asymmetry factor can be useful in the analysis of the daily electricity production from a photovoltaic conversion. In order to determine the repeatability of monthly electricity production, occurring between the summer, and summer and winter months, a non-parametric Mann-Whitney U test was used as a statistical solution. In order to analyze the repeatability of daily peak hours, describing the largest value of the hourly electricity production, a non-parametric Kruskal-Wallis test was applied as an extension of the Mann-Whitney U test. Based on the analysis of the electric energy distribution from a prepared monitoring system it was found that traditional forecasting methods of the electricity production from a photovoltaic conversion, like multiple regression models, should not be the preferred methods of the analysis.

  18. A statistical method to estimate low-energy hadronic cross sections

    Science.gov (United States)

    Balassa, Gábor; Kovács, Péter; Wolf, György

    2018-02-01

    In this article we propose a model based on the Statistical Bootstrap approach to estimate the cross sections of different hadronic reactions up to a few GeV in c.m.s. energy. The method is based on the idea, when two particles collide a so-called fireball is formed, which after a short time period decays statistically into a specific final state. To calculate the probabilities we use a phase space description extended with quark combinatorial factors and the possibility of more than one fireball formation. In a few simple cases the probability of a specific final state can be calculated analytically, where we show that the model is able to reproduce the ratios of the considered cross sections. We also show that the model is able to describe proton-antiproton annihilation at rest. In the latter case we used a numerical method to calculate the more complicated final state probabilities. Additionally, we examined the formation of strange and charmed mesons as well, where we used existing data to fit the relevant model parameters.

  19. An Automated Energy Detection Algorithm Based on Morphological and Statistical Processing Techniques

    Science.gov (United States)

    2018-01-09

    100 kHz, 1 MHz 100 MHz–1 GHz 1 100 kHz 3. Statistical Processing 3.1 Statistical Analysis Statistical analysis is the mathematical science...quantitative terms. In commercial prognostics and diagnostic vibrational monitoring applications , statistical techniques that are mainly used for alarm...Balakrishnan N, editors. Handbook of statistics . Amsterdam (Netherlands): Elsevier Science; 1998. p 555–602; (Order statistics and their applications

  20. Statistical analysis of the limitation of half integer resonances on the available momentum acceptance of the High Energy Photon Source

    Energy Technology Data Exchange (ETDEWEB)

    Jiao, Yi, E-mail: jiaoyi@ihep.ac.cn; Duan, Zhe

    2017-01-01

    In a diffraction-limited storage ring, half integer resonances can have strong effects on the beam dynamics, associated with the large detuning terms from the strong focusing and strong sextupoles as required for an ultralow emittance. In this study, the limitation of half integer resonances on the available momentum acceptance (MA) was statistically analyzed based on one design of the High Energy Photon Source (HEPS). It was found that the probability of MA reduction due to crossing of half integer resonances is closely correlated with the level of beta beats at the nominal tunes, but independent of the error sources. The analysis indicated that for the presented HEPS lattice design, the rms amplitude of beta beats should be kept below 1.5% horizontally and 2.5% vertically to reach a small MA reduction probability of about 1%.

  1. Spectrum and energy levels of kryptonlike ion Nb VI

    International Nuclear Information System (INIS)

    Reader, J.; Ekberg, J.O.

    1993-01-01

    The spectrum of five-times ionized niobium, Nb, VI, was observed from 238 to 2700 angstrom with sliding spark discharges on 10.7-m normal- and grazing-incidence spectrographs. Experimental energies were determined for all levels of the 4s 2 4p 6 , 4s 2 4p 6 , 4s 2 4p 5 4d, 4f, 5s, 5p, 5g, 6s, and 4s4p 6 4d configurations as well as some levels of 4p 5 6g. A total of 291 lines were classified as transitions between 88 observed levels. A previous analysis of this spectrum was found to be totally erroneous. Large hyperfine splittings were found for several levels of the 4p 5 5s and 5p configurations. The observed configurations were theoretically interpreted by means of Hartree-Fock calculations and least squares fits of the energy parameters to the observed levels. A revised value of the ionization energy was obtained from the 4p 5 5g and 6g configurations

  2. Statistical improvement in detection level of gravitational microlensing events from their light curves

    Science.gov (United States)

    Ibrahim, Ichsan; Malasan, Hakim L.; Kunjaya, Chatief; Timur Jaelani, Anton; Puannandra Putri, Gerhana; Djamal, Mitra

    2018-04-01

    In astronomy, the brightness of a source is typically expressed in terms of magnitude. Conventionally, the magnitude is defined by the logarithm of received flux. This relationship is known as the Pogson formula. For received flux with a small signal to noise ratio (S/N), however, the formula gives a large magnitude error. We investigate whether the use of Inverse Hyperbolic Sine function (hereafter referred to as the Asinh magnitude) in the modified formulae could allow for an alternative calculation of magnitudes for small S/N flux, and whether the new approach is better for representing the brightness of that region. We study the possibility of increasing the detection level of gravitational microlensing using 40 selected microlensing light curves from the 2013 and 2014 seasons and by using the Asinh magnitude. Photometric data of the selected events are obtained from the Optical Gravitational Lensing Experiment (OGLE). We found that utilization of the Asinh magnitude makes the events brighter compared to using the logarithmic magnitude, with an average of about 3.42 × 10‑2 magnitude and an average in the difference of error between the logarithmic and the Asinh magnitude of about 2.21 × 10‑2 magnitude. The microlensing events OB140847 and OB140885 are found to have the largest difference values among the selected events. Using a Gaussian fit to find the peak for OB140847 and OB140885, we conclude statistically that the Asinh magnitude gives better mean squared values of the regression and narrower residual histograms than the Pogson magnitude. Based on these results, we also attempt to propose a limit in magnitude value for which use of the Asinh magnitude is optimal with small S/N data.

  3. Energy balance of lactating primiparous sows as affected by feeding level and dietary energy source

    NARCIS (Netherlands)

    Brand, van den H.; Heetkamp, M.J.W.; Soede, N.M.; Schrama, J.W.; Kemp, B.

    2000-01-01

    The effects of feeding level and major dietary energy source used during lactation on sow milk composition, piglet body composition, and energy balance of sows were determined. During a 21-d lactation, 48 primiparous sows were fed either a Fat-rich (134.9 g/kg fat; 196.8 g/kg carbohydrate) or a

  4. Statistical measurement of the gamma-ray source-count distribution as a function of energy

    Science.gov (United States)

    Zechlin, H.-S.; Cuoco, A.; Donato, F.; Fornengo, N.; Regis, M.

    2017-01-01

    Photon counts statistics have recently been proven to provide a sensitive observable for characterizing gamma-ray source populations and for measuring the composition of the gamma-ray sky. In this work, we generalize the use of the standard 1-point probability distribution function (1pPDF) to decompose the high-latitude gamma-ray emission observed with Fermi-LAT into: (i) point-source contributions, (ii) the Galactic foreground contribution, and (iii) a diffuse isotropic background contribution. We analyze gamma-ray data in five adjacent energy bands between 1 and 171 GeV. We measure the source-count distribution dN/dS as a function of energy, and demonstrate that our results extend current measurements from source catalogs to the regime of so far undetected sources. Our method improves the sensitivity for resolving point-source populations by about one order of magnitude in flux. The dN/dS distribution as a function of flux is found to be compatible with a broken power law. We derive upper limits on further possible breaks as well as the angular power of unresolved sources. We discuss the composition of the gamma-ray sky and capabilities of the 1pPDF method.

  5. On the efficiency of high-energy particle identification statistical methods

    International Nuclear Information System (INIS)

    Chilingaryan, A.A.

    1982-01-01

    An attempt is made to analyze the statistical methods of making decisions on the high-energy particle identification. The Bayesian approach is shown to provide the most complete account of the primary discriminative information between the particles of various tupes. It does not impose rigid requirements on the density form of the probability function and ensures the account of the a priori information as compared with the Neyman-Pearson approach, the mimimax technique and the heristic rules of the decision limits construction in the variant region of the specially chosen parameter. The methods based on the concept of the nearest neighbourhood are shown to be the most effective one among the local methods of the probability function density estimation. The probability distances between the training sample classes are suggested to make a decision on selecting the high-energy particle detector optimal parameters. The method proposed and the software constructed are tested on the problem of the cosmic radiation hadron identification by means of transition radiation detectors (the ''PION'' experiment)

  6. Framework for State-Level Renewable Energy Market Potential Studies

    Energy Technology Data Exchange (ETDEWEB)

    Kreycik, C.; Vimmerstedt, L.; Doris, E.

    2010-01-01

    State-level policymakers are relying on estimates of the market potential for renewable energy resources as they set goals and develop policies to accelerate the development of these resources. Therefore, accuracy of such estimates should be understood and possibly improved to appropriately support these decisions. This document provides a framework and next steps for state officials who require estimates of renewable energy market potential. The report gives insight into how to conduct a market potential study, including what supporting data are needed and what types of assumptions need to be made. The report distinguishes between goal-oriented studies and other types of studies, and explains the benefits of each.

  7. Photon statistics in an N-level (N-1)-mode system

    International Nuclear Information System (INIS)

    Kozierowski, M.; Shumovskij, A.S.

    1987-01-01

    The characteristic and photon number distribution functions, the statistical moments of photon numbers and the correlations of modes are studied. The normally ordered variances of the photon numbers and the cross-correlation functions are calculated

  8. The Use of Social Media for Communication In Official Statistics at European Level

    Directory of Open Access Journals (Sweden)

    Ionela-Roxana GLĂVAN

    2016-12-01

    Full Text Available Social media tools are wide spread in web communication and are gaining popularity in the communication process between public institutions and citizens. This study conducts an analysis on how social media is used by Official Statistical Institutes to interact with citizens and disseminate information. A linear regression technique is performed to examine which social media platforms (Twitter or Facebook is a more effective tool in the communication process in the official statistics area. Our study suggests that Twitter is a more powerful tool than Facebook in enhancing the relationship between official statistics and citizens, complying with several other studies. Next, we performed an analysis on Twitter network characteristics discussing “official statistics” using NodeXL that revealed the unexploited potential of this network by official statistical agencies.

  9. The Use of Social Media for Communication In Official Statistics at European Level

    OpenAIRE

    Ionela-Roxana GLĂVAN; Andreea MIRICĂ; Bogdan Narcis FÎRȚESCU

    2016-01-01

    Social media tools are wide spread in web communication and are gaining popularity in the communication process between public institutions and citizens. This study conducts an analysis on how social media is used by Official Statistical Institutes to interact with citizens and disseminate information. A linear regression technique is performed to examine which social media platforms (Twitter or Facebook) is a more effective tool in the communication process in the official statistics area. O...

  10. Statistical method for the determination of the ignition energy of dust cloud - experimental validation

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, S.; Lebecki, K.; Gillard, P.; Youinou, L.; Baudry, G. [University of Orleans, Bourges (France)

    2010-05-15

    Powdery materials such as metallic or polymer powders play a considerable role in many industrial processes. Their use requires the introduction of preventive safeguard to control the plants safety. The mitigation of an explosion hazard, according to the ATEX 137 Directive (1999/92/EU), requires the assessment of the dust ignition sensitivity. PRISME laboratory (University of Orleans) has developed an experimental set-up and methodology, using the Langlie test, for the quick determination of the explosion sensitivity of dusts. This method requires only 20 shots and ignition sensitivity is evaluated through the E{sub 50} (energy with an ignition probability of 0.5) A Hartmann tube, with a volume of 1.3l, was designed and built. Many results on the energy ignition thresholds of partially oxidised aluminium were obtained using this experimental device and compared to literature. E-50 evolution is the same as MIE but their respective values are different and MIE is lower than E{sub 50} however the link between E{sub 50} and MIE has not been elucidated In this paper, the Langlie method is explained in detail for the determination of the parameters (mean value E{sub 50} and standard deviation {sigma}) of the associated statistic law. The ignition probability versus applied energy is firstly measured for Lycopodium in order to validate the method A comparison between the normal and the lognormal law was achieved and the best fit was obtained with the lognormal law. In a second part, the Langlie test was performed on different dusts such as aluminium, cornstarch, lycopodium, coal, and PA12 in order to determine E-50 and {sigma} for each dust. The energies E{sub 05} and E{sub 10} corresponding respectively to an ignition probability of 0.05 and 0.1 are determined with the lognormal law and compared to MIE find in literature. E{sub 05} and E{sub 10} values of ignition energy were found to be very close and were in good agreement with MIE in the literature.

  11. Energy levels, lifetimes and radiative data of W LV

    Science.gov (United States)

    Ding, Xiao-bin; Sun, Rui; Koike, Fumihiro; Murakami, Izumi; Kato, Daiji; Sakaue, Hiroyuki A.; Nakamura, Nobuyuki; Dong, Chen-zhong

    2018-01-01

    Calculations of energy levels, radiative data and lifetimes are reported for tungsten Ca-like ion (W LV) by using multi-configuration Dirac-Fock (MCDF) method. The GRASP2K package is adopted to carry out a large-scale systematic computation with a restricted active space treatment; the Breit interaction and QED effects are included in subsequent relativistic configuration interaction calculations. The energies and lifetimes of the lowest 119 levels are listed; the main leading configuration of the levels is of the ground state configuration [Ne]3s23p63d2 and the first excited configuration [Ne]3s23p53d3. The wavelengths, radiative rates and oscillator strengths for relatively strong E1, E2, M1, and M2 transitions are listed. Comparisons with earlier experimental and theoretical values are made. The average relative deviations of energy levels from the NIST results and E1 transition wavelengths from the EBIT experimental results have turned to be only 0.20% and 0.13%, respectively. The other present results are in reasonable agreement with available data. These agreements confirm the reliability and accuracy of the current results. The present datasets may help us with the investigation of the electron-electron correlation effects in complex multi-electron highly charged heavy ions and of the diagnosis of tungsten impurity plasmas in fusion science.

  12. Statistical Analysis of the Figure of Merit of a Two-Level Thermoelectric System: A Random Matrix Approach

    KAUST Repository

    Abbout, Adel

    2016-08-05

    Using the tools of random matrix theory we develop a statistical analysis of the transport properties of thermoelectric low-dimensional systems made of two electron reservoirs set at different temperatures and chemical potentials, and connected through a low-density-of-states two-level quantum dot that acts as a conducting chaotic cavity. Our exact treatment of the chaotic behavior in such devices lies on the scattering matrix formalism and yields analytical expressions for the joint probability distribution functions of the Seebeck coefficient and the transmission profile, as well as the marginal distributions, at arbitrary Fermi energy. The scattering matrices belong to circular ensembles which we sample to numerically compute the transmission function, the Seebeck coefficient, and their relationship. The exact transport coefficients probability distributions are found to be highly non-Gaussian for small numbers of conduction modes, and the analytical and numerical results are in excellent agreement. The system performance is also studied, and we find that the optimum performance is obtained for half-transparent quantum dots; further, this optimum may be enhanced for systems with few conduction modes.

  13. Statistical Analysis of the Figure of Merit of a Two-Level Thermoelectric System: A Random Matrix Approach

    KAUST Repository

    Abbout, Adel; Ouerdane, Henni; Goupil, Christophe

    2016-01-01

    Using the tools of random matrix theory we develop a statistical analysis of the transport properties of thermoelectric low-dimensional systems made of two electron reservoirs set at different temperatures and chemical potentials, and connected through a low-density-of-states two-level quantum dot that acts as a conducting chaotic cavity. Our exact treatment of the chaotic behavior in such devices lies on the scattering matrix formalism and yields analytical expressions for the joint probability distribution functions of the Seebeck coefficient and the transmission profile, as well as the marginal distributions, at arbitrary Fermi energy. The scattering matrices belong to circular ensembles which we sample to numerically compute the transmission function, the Seebeck coefficient, and their relationship. The exact transport coefficients probability distributions are found to be highly non-Gaussian for small numbers of conduction modes, and the analytical and numerical results are in excellent agreement. The system performance is also studied, and we find that the optimum performance is obtained for half-transparent quantum dots; further, this optimum may be enhanced for systems with few conduction modes.

  14. Superconducting magnetic energy storage for electric utility load leveling: A study of cost vs. stored energy

    International Nuclear Information System (INIS)

    Luongo, C.A.; Loyd, R.J.

    1987-01-01

    Superconducting Magnetic Energy Storage (SMES) is a promising technology for electric utility load leveling. This paper presents the results of a study to establish the capital cost of SMES as a function of stored energy. Energy-related coil cost and total installed plant cost are given for construction in nominal soil and in competent rock. Economic comparisons are made between SMES and other storage technologies and peaking gas turbines. SMES is projected to be competitive at stored energies as low as 1000 MWh

  15. Historical-statistical analysis of energy consumption in energy management; Analisis historico-estadistico del consumo energetico en la administracion de energia

    Energy Technology Data Exchange (ETDEWEB)

    Guizar Bejarano, Ruben [IMENOR (Mexico); Oven, Mark [RCG/Hagler, Bailly, Inc., Washington (United States)

    1993-12-31

    Traditionally the specific consumption of energy has been considered as the most adequate index to evaluate the efficiencies in the productive processes. Nevertheless, this index, in some instances is highly susceptible to suffer significant variations, due to factors such as equipment condition, raw materials quality, operational parameters, climate and production level. This last one definitely is the most important and requires a deeper analysis. In this presentation a methodology is developed to analyze the energy consumption as well as their specific energy consumption with respect to production. Enough historical data are utilized to allow for a statistical analysis. This study is of equal usefulness in an energy diagnosis, as in a management program of energy saving. In presenting the possibility of identifying potential energy saving, stands out the advantages of the analysis and the conclusions that can be derived from it. Through the actual data collected in several industries during the energy diagnosis, various possible results of the analysis are presented. Finally, how this type of analysis can be adapted to a more precise control of the energy consumption is described and be used as a base for establishing goals in energy efficiency in the long term. [Espanol] Tradicionalmente se ha considerado al consumo especifico de energia como el indice energetico mas adecuado para evaluar las eficiencias de los procesos productivos. Sin embargo, este indice es en ocasiones altamente susceptible a sufrir variaciones importantes, debido a factores como el estado de los equipos, la calidad de la materia prima, los parametros operativos, el clima, y el nivel de produccion. Este ultimo es decididamente el mas importante, y requiere un analisis mas profundo. En esta presentacion se desarrolla una metodologia para analizar tanto consumos de energia como consumos especificos de energia con respecto a la produccion. Se utilizan suficientes datos historicos para permitir

  16. Historical-statistical analysis of energy consumption in energy management; Analisis historico-estadistico del consumo energetico en la administracion de energia

    Energy Technology Data Exchange (ETDEWEB)

    Guizar Bejarano, Ruben [IMENOR (Mexico); Oven, Mark [RCG/Hagler, Bailly, Inc., Washington (United States)

    1992-12-31

    Traditionally the specific consumption of energy has been considered as the most adequate index to evaluate the efficiencies in the productive processes. Nevertheless, this index, in some instances is highly susceptible to suffer significant variations, due to factors such as equipment condition, raw materials quality, operational parameters, climate and production level. This last one definitely is the most important and requires a deeper analysis. In this presentation a methodology is developed to analyze the energy consumption as well as their specific energy consumption with respect to production. Enough historical data are utilized to allow for a statistical analysis. This study is of equal usefulness in an energy diagnosis, as in a management program of energy saving. In presenting the possibility of identifying potential energy saving, stands out the advantages of the analysis and the conclusions that can be derived from it. Through the actual data collected in several industries during the energy diagnosis, various possible results of the analysis are presented. Finally, how this type of analysis can be adapted to a more precise control of the energy consumption is described and be used as a base for establishing goals in energy efficiency in the long term. [Espanol] Tradicionalmente se ha considerado al consumo especifico de energia como el indice energetico mas adecuado para evaluar las eficiencias de los procesos productivos. Sin embargo, este indice es en ocasiones altamente susceptible a sufrir variaciones importantes, debido a factores como el estado de los equipos, la calidad de la materia prima, los parametros operativos, el clima, y el nivel de produccion. Este ultimo es decididamente el mas importante, y requiere un analisis mas profundo. En esta presentacion se desarrolla una metodologia para analizar tanto consumos de energia como consumos especificos de energia con respecto a la produccion. Se utilizan suficientes datos historicos para permitir

  17. Energy Level Composite Curves-a new graphical methodology for the integration of energy intensive processes

    International Nuclear Information System (INIS)

    Anantharaman, Rahul; Abbas, Own Syed; Gundersen, Truls

    2006-01-01

    Pinch Analysis, Exergy Analysis and Optimization have all been used independently or in combination for the energy integration of process plants. In order to address the issue of energy integration, taking into account composition and pressure effects, the concept of energy level as proposed by [X. Feng, X.X. Zhu, Combining pinch and exergy analysis for process modifications, Appl. Therm. Eng. 17 (1997) 249] has been modified and expanded in this work. We have developed a strategy for energy integration that uses process simulation tools to define the interaction between the various subsystems in the plant and a graphical technique to help the engineer interpret the results of the simulation with physical insights that point towards exploring possible integration schemes to increase energy efficiency. The proposed graphical representation of energy levels of processes is very similar to the Composite Curves of Pinch Analysis-the interpretation of the Energy Level Composite Curves reduces to the Pinch Analysis case when dealing with heat transfer. Other similarities and differences are detailed in this work. Energy integration of a methanol plant is taken as a case study to test the efficacy of this methodology. Potential integration schemes are identified that would have been difficult to visualize without the help of the new graphical representation

  18. Spinless Salpeter equation: Laguerre bounds on energy levels

    International Nuclear Information System (INIS)

    Lucha, W.; Schoeberl, F.F.

    1996-08-01

    The spinless Salpeter equation may be considered either as a standard approximation to the Bethe-Salpeter formalism, designed for the description of bound states within a relativistic quantum field theory, or as the most simple, to a certain extent relativistic generalization of the customary non relativistic Schroedinger formalism. Because of the presence of the rather difficult-to-handle square-root operator of the relativistic kinetic energy in the corresponding Hamiltonian, very frequently the corresponding (discrete) spectrum of energy eigenvalues cannot be determined analytically. Therefore, we show how to calculate, by some clever choice of basis vectors in the Hilbert space of solutions, for the rather large class of power-law potentials, at least (sometimes excellent) upper bounds on these energy eigenvalues, for the lowest-lying levels this even analytically. (author)

  19. Public budgets for energy RD&D and the effects on energy intensity and pollution levels.

    Science.gov (United States)

    Balsalobre, Daniel; Álvarez, Agustín; Cantos, José María

    2015-04-01

    This study, based on the N-shaped cubic model of the environmental Kuznets curve, analyzes the evolution of per capita greenhouse gas emissions (GHGpc) using not just economic growth but also public budgets dedicated to energy-oriented research development and demonstration (RD&D) and energy intensity. The empirical evidence, obtained from an econometric model of fixed effects for 28 OECD countries during 1994-2010, suggests that energy innovations help reduce GHGpc levels and mitigate the negative impact of energy intensity on environmental quality. When countries develop active energy RD&D policies, they can reduce both the rates of energy intensity and the level of GHGpc emissions. This paper incorporates a moderating variable to the econometric model that emphasizes the effect that GDP has on energy intensity. It also adds a variable that reflects the difference between countries that have made a greater economic effort in energy RD&D, which in turn corrects the GHG emissions resulting from the energy intensity of each country.

  20. Lamb shift of energy levels in quantum rings

    International Nuclear Information System (INIS)

    Kryuchkyan, G Yu; Kyriienko, O; Shelykh, I A

    2015-01-01

    We study the vacuum radiative corrections to energy levels of a confined electron in quantum rings. The calculations are provided for the Lamb shift of energy levels in a low-momentum region of virtual photons and for both one-dimensional and two-dimensional quantum rings. We show that contrary to the well known case of a hydrogen atom the value of the Lamb shift increases with the magnetic momentum quantum number m. We also investigate the dependence of the Lamb shift on magnetic flux piercing the ring and demonstrate a presence of magnetic-flux-dependent oscillations. For a one-dimensional ring the value of the shift strongly depends on the radius of the ring. It is small for semiconductor rings but can attain measurable quantities in natural organic ring-shape molecules, such as benzene, cycloalcanes and porphyrins. (paper)

  1. On Low Energy Levels in {sup 185}W

    Energy Technology Data Exchange (ETDEWEB)

    Malmskog, S G; Hoejeberg, M; Berg, V

    1969-02-15

    Gamma ray spectra in the decay of {sup 185}Ta and {sup 185m}W have been studied with Ge (Li) detectors. The {sup 185m}W isomeric transition at 131.6 keV is shown to be of E3 multipolarity. A level scheme of {sup 185}W is proposed with the following energy levels (energies in keV, spin and K quantum numbers in brackets): 0 (3/2{sup -} 3/2), 23.5 (1/2{sup -} 1/2), 65.9 (5/2{sup -} 3/2), 93.5 (3/2{sup -} 1/2) (uncertain), 173.9 (7/2{sup -} 3/2), 188.1 (5/2{sup -} 1/2), 197.5 (11/2{sup +} 11/2) , 243.5 (7/2{sup -} 7/2), and 390.8 (9/2{sup -} 7/2)

  2. Energy efficiency and exporting: Evidence from firm-level data

    International Nuclear Information System (INIS)

    Roy, Jayjit; Yasar, Mahmut

    2015-01-01

    While exporting firms and non-exporters have been compared across several dimensions, empirical comparisons on the basis of environmental performance are relatively few. Moreover, analyzing the environmental implications of firm-level exports is not trivial due to non-random selection into exporting. In this light, we examine the impact of exporting on firms' energy efficiency by resorting to an instrumental variables strategy based on a differencing approach (Pitt and Rosenzweig, 1990). Utilizing data from Indonesia, we find (i) exporting to reduce the use of fuels (relative to electricity) and (ii) concerns over endogeneity of exporting status to be relevant. - Highlights: • We examine the impact of exporting on firms' energy efficiency. • We employ cost share equations, firm-level data from Indonesia, and an instrumental variables strategy. • Exporting is found to reduce the use of fuels (relative to electricity).

  3. Wind energy statistics of Finland. Yearly report 2011; Tuulivoiman tuotantotilastot. Vuosiraportti 2011

    Energy Technology Data Exchange (ETDEWEB)

    Turkia, V.; Holttinen, H.

    2013-01-15

    Wind power production from grid connected wind turbines in Finland was 481 GWh in 2011. This corresponds to 0.6 % of Finland's electricity consumption. Installed wind capacity was 199 MW at the end of the year and the number of the operating turbines was 131. Two new turbines were installed in 2011 with the total power of 1.75 MW and no turbines were taken out of operation. The average size of all turbines in Finland was 1 519 kW at the end of 2011 (1519 kW at the end of 2010). The new climate and energy strategy has a target of 2 500 MW wind power in 2020. A market based feed-in system with a guaranteed price of 83.5 euro/MWh entered into force on 25 March 2011 in Finland. There will be an increased tariff of 105.3 euro/MWh until end of 2015 (max 3 years). The difference between the guaranteed price and spot price of electricity will be paid to the producers as a premium. Year 2010 had close to long term average wind resource. The weighted production index for the four sea areas was 98 %. Average capacity factor of standard wind turbines, which operated the whole year, was 24 % while the best turbine yielded 45 % capacity factor. Technical availability of the standard wind power plants was 88,5 % in 2011. This report contains production and availability figures of the grid connected wind turbines in Finland as well as component summary of failure statistics. There is an English list of figure and table captions and the yearly statistics table is as an appendix. (orig.)

  4. ATLAS Level-1 Calorimeter Trigger: Initial Timing and Energy Calibration

    CERN Document Server

    Childers, J T; The ATLAS collaboration

    2010-01-01

    The ATLAS Level-1 Calorimeter Trigger identifies high-pT objects in the Liquid Argon and Tile Calorimeters with a fixed latency of ~2.0 µs using a hardware-based, pipelined system built with custom electronics. The Preprocessor Module conditions and digitizes about 7200 pre-summed analogue signals from the calorimeters at the LHC bunch-crossing frequency of 40 MHz, and performs bunch-crossing identification (BCID) and deposited energy measurement for each input signal. This information is passed to further processors for object classification and total energy calculation, and the results used to make the Level-1 trigger decision for the ATLAS detector. The BCID and energy measurement in the trigger depend on precise timing adjustment to achieve correct sampling of the input signal peak. Test pulses from the calorimeters were analysed to derive the initial timing and energy calibration, and first data from the LHC restart in autumn 2009 and early 2010 were used for validation and further optimization. The res...

  5. Department of Energy low-level radioactive waste disposal concepts

    International Nuclear Information System (INIS)

    Ozaki, C.; Page, L.; Morreale, B.; Owens, C.

    1990-01-01

    The Department of Energy manages its low-level waste (LLW), regulated by DOE Order 5820.2A by using an overall systems approach. This systems approach provides an improved and consistent management system for all DOE LLW waste, from generation to disposal. This paper outlines six basic disposal concepts used in the systems approach, discusses issues associated with each of the concepts, and outlines both present and future disposal concepts used at six DOE sites

  6. Energy level alignment in Au/pentacene/PTCDA trilayer stacks

    OpenAIRE

    Sehati, P.; Braun, S.; Fahlman, M.

    2013-01-01

    Ultraviolet photoelectron spectroscopy is used to investigate the energy level alignment and molecular orientation at the interfaces in Au/pentacene/PTCDA trilayer stacks. We deduced a standing orientation for pentacene grown on Au while we conclude a flat lying geometry for PTCDA grown onto pentacene. We propose that the rough surface of polycrystalline Au induces the standing geometry in pentacene. It is further shown that in situ deposition of PTCDA on pentacene can influence the orientati...

  7. Vibro-acoustic modelling of aircraft double-walls with structural links using Statistical Energy Analysis

    Science.gov (United States)

    Campolina, Bruno L.

    The prediction of aircraft interior noise involves the vibroacoustic modelling of the fuselage with noise control treatments. This structure is composed of a stiffened metallic or composite panel, lined with a thermal and acoustic insulation layer (glass wool), and structurally connected via vibration isolators to a commercial lining panel (trim). The goal of this work aims at tailoring the noise control treatments taking design constraints such as weight and space optimization into account. For this purpose, a representative aircraft double-wall is modelled using the Statistical Energy Analysis (SEA) method. Laboratory excitations such as diffuse acoustic field and point force are addressed and trends are derived for applications under in-flight conditions, considering turbulent boundary layer excitation. The effect of the porous layer compression is firstly addressed. In aeronautical applications, compression can result from the installation of equipment and cables. It is studied analytically and experimentally, using a single panel and a fibrous uniformly compressed over 100% of its surface. When compression increases, a degradation of the transmission loss up to 5 dB for a 50% compression of the porous thickness is observed mainly in the mid-frequency range (around 800 Hz). However, for realistic cases, the effect should be reduced since the compression rate is lower and compression occurs locally. Then the transmission through structural connections between panels is addressed using a four-pole approach that links the force-velocity pair at each side of the connection. The modelling integrates experimental dynamic stiffness of isolators, derived using an adapted test rig. The structural transmission is then experimentally validated and included in the double-wall SEA model as an equivalent coupling loss factor (CLF) between panels. The tested structures being flat, only axial transmission is addressed. Finally, the dominant sound transmission paths are

  8. Development of a microlesson in teaching energy levels of atoms

    Science.gov (United States)

    Rodriguez, Cherilyn A.; Buan, Amelia T.

    2018-01-01

    Energy levels of atoms is one of the difficult topics in understanding atomic structure of matter. It appears tobe abstract, theoretical and needs visual representation and images. Hence, in this study a microlesson in teaching the high school chemistry concept on the energy levels of atoms is developed and validated. The researchers utilized backward curriculum design in planning the microlesson to meet the standards of the science K-12 curriculum. The planning process of the microlesson involved a) Identifying the learning competencies in K-12 science curriculum b) write learning objectives c) planning of assessment tools d) making a storyboard e) designing the microlesson and validate and revise the microlesson. The microlesson made use of varied resources in the internet from which the students accessed and collected information about energy levels of atoms. Working in groups, the students synthesized the information on how and why fireworks produce various colors of light through a post card. Findings of the study showed that there was an increase of achievement in learning the content and the students were highly motivated to learn chemistry. Furthermore, the students perceived that the microlesson helped them to understand the chemistry concept through the use of appropriate multimedia activities.

  9. Towards Flexibility Detection in Device-Level Energy Consumption

    DEFF Research Database (Denmark)

    Neupane, Bijay; Pedersen, Torben Bach; Thiesson, Bo

    2014-01-01

    The increasing drive towards green energy has boosted the installation of Renewable Energy Sources (RES). Increasing the share of RES in the power grid requires demand management by flexibility in the consumption. In this paper, we perform a state-of-the-art analysis on the flexibility and operat......The increasing drive towards green energy has boosted the installation of Renewable Energy Sources (RES). Increasing the share of RES in the power grid requires demand management by flexibility in the consumption. In this paper, we perform a state-of-the-art analysis on the flexibility...... and operation patterns of the devices in a set of real households. We propose a number of specific pre-processing steps such as operation stage segmentation, and aberrant operation duration removal to clean device level data. Further, we demonstrate various device operation properties such as hourly and daily...... regularities and patterns and the correlation between operating different devices. Subsequently, we show the existence of detectable time and energy flexibility in device operations. Finally, we provide various results providing a foundation for load- and flexibility-detection and -prediction at the device...

  10. Energy mesh optimization for multi-level calculation schemes

    International Nuclear Information System (INIS)

    Mosca, P.; Taofiki, A.; Bellier, P.; Prevost, A.

    2011-01-01

    The industrial calculations of third generation nuclear reactors are based on sophisticated strategies of homogenization and collapsing at different spatial and energetic levels. An important issue to ensure the quality of these calculation models is the choice of the collapsing energy mesh. In this work, we show a new approach to generate optimized energy meshes starting from the SHEM 281-group library. The optimization model is applied on 1D cylindrical cells and consists of finding an energy mesh which minimizes the errors between two successive collision probability calculations. The former is realized over the fine SHEM mesh with Livolant-Jeanpierre self-shielded cross sections and the latter is performed with collapsed cross sections over the energy mesh being optimized. The optimization is done by the particle swarm algorithm implemented in the code AEMC and multigroup flux solutions are obtained from standard APOLLO2 solvers. By this new approach, a set of new optimized meshes which encompass from 10 to 50 groups has been defined for PWR and BWR calculations. This set will allow users to adapt the energy detail of the solution to the complexity of the calculation (assembly, multi-assembly, two-dimensional whole core). Some preliminary verifications, in which the accuracy of the new meshes is measured compared to a direct 281-group calculation, show that the 30-group optimized mesh offers a good compromise between simulation time and accuracy for a standard 17 x 17 UO 2 assembly with and without control rods. (author)

  11. Nuclear Level Densities for Modeling Nuclear Reactions: An Efficient Approach Using Statistical Spectroscopy

    International Nuclear Information System (INIS)

    Calvin W. Johnson

    2005-01-01

    The general goal of the project is to develop and implement computer codes and input files to compute nuclear densities of state. Such densities are important input into calculations of statistical neutron capture, and are difficult to access experimentally. In particular, we will focus on calculating densities for nuclides in the mass range A ∼ 50-100. We use statistical spectroscopy, a moments method based upon a microscopic framework, the interacting shell model. Second year goals and milestones: Develop two or three competing interactions (based upon surface-delta, Gogny, and NN-scattering) suitable for application to nuclei up to A = 100. Begin calculations for nuclides with A = 50-70

  12. Energy innovation and renewable energy consumption in the correction of air pollution levels

    International Nuclear Information System (INIS)

    Alvarez-Herranz, Agustin; Balsalobre-Lorente, Daniel; Shahbaz, Muhammad; Cantos, José María

    2017-01-01

    This study analyses the relationship between economic growth and environmental pollution. Specifically, it investigates the presence of an environmental Kuznets curve (EKC) in 17 OECD countries over the period of 1990–2012. The results confirm the existence of an N-shaped EKC relationship between income and environmental degradation. The study offers a novel methodological contribution that makes it possible to explain the environmental pollution process through the analysis of low-carbon technologies. This demonstrates how income levels affect energy consumption and how higher energy demand leads to a larger share of fossil sources in the energy mix and, thus, increased greenhouse gas (GHG) emissions. The effect on per capita GHG emissions is explored in a model containing a dampening variable that moderates the relationship between energy consumption and income. This empirical evidence helps to explain the interaction between energy regulation, economic growth and carbon emissions. This study also confirms the positive effect that energy innovation process exerts on environmental pollution. Finally, it is noted that renewable energy sources help to improve air quality. - Highlights: • An inverted N-shaped relationship between economic growth and environmental degradation in OECD countries is validated. • Energy regulatory policies exert positive effect on environmental quality. • Energy innovation processes delays the technical obsolescence. • Energy innovation process requires a time lag to become fully efficient.

  13. Low-level contrast statistics of natural images can modulate the frequency of event-related potentials (ERP in humans

    Directory of Open Access Journals (Sweden)

    Masoud Ghodrati

    2016-12-01

    Full Text Available Humans are fast and accurate in categorizing complex natural images. It is, however, unclear what features of visual information are exploited by brain to perceive the images with such speed and accuracy. It has been shown that low-level contrast statistics of natural scenes can explain the variance of amplitude of event-related potentials (ERP in response to rapidly presented images. In this study, we investigated the effect of these statistics on frequency content of ERPs. We recorded ERPs from human subjects, while they viewed natural images each presented for 70 ms. Our results showed that Weibull contrast statistics, as a biologically plausible model, explained the variance of ERPs the best, compared to other image statistics that we assessed. Our time-frequency analysis revealed a significant correlation between these statistics and ERPs’ power within theta frequency band (~3-7 Hz. This is interesting, as theta band is believed to be involved in context updating and semantic encoding. This correlation became significant at ~110 ms after stimulus onset, and peaked at 138 ms. Our results show that not only the amplitude but also the frequency of neural responses can be modulated with low-level contrast statistics of natural images and highlights their potential role in scene perception.

  14. Statistical classification of log response as an indicator of facies variation during changes in sea level

    DEFF Research Database (Denmark)

    Inwood, Jennifer; Lofi, Johanna; Davies, Sarah

    2013-01-01

    In this study, a novel application of a statistical approach is utilized for analysis of downhole logging data from Miocene-aged siliciclastic shelf sediments on the New Jersey Margin (eastern USA). A multivariate iterative nonhierarchical cluster analysis (INCA) of spectral gamma-ray logs from I...

  15. Symbol recognition via statistical integration of pixel-level constraint histograms: a new descriptor.

    Science.gov (United States)

    Yang, Su

    2005-02-01

    A new descriptor for symbol recognition is proposed. 1) A histogram is constructed for every pixel to figure out the distribution of the constraints among the other pixels. 2) All the histograms are statistically integrated to form a feature vector with fixed dimension. The robustness and invariance were experimentally confirmed.

  16. A statistical strategy to assess cleaning level of surfaces using fluorescence spectroscopy and Wilks’ ratio

    DEFF Research Database (Denmark)

    Stoica, Iuliana-Madalina; Babamoradi, Hamid; van den Berg, Frans

    2017-01-01

    •A statistical strategy combining fluorescence spectroscopy, multivariate analysis and Wilks’ ratio is proposed.•The method was tested both off-line and on-line having riboflavin as a (controlled) contaminant.•Wilks’ ratio signals unusual recordings based on shifts in variance and covariance...... structure described in in-control data....

  17. Replicate This! Creating Individual-Level Data from Summary Statistics Using R

    Science.gov (United States)

    Morse, Brendan J.

    2013-01-01

    Incorporating realistic data and research examples into quantitative (e.g., statistics and research methods) courses has been widely recommended for enhancing student engagement and comprehension. One way to achieve these ends is to use a data generator to emulate the data in published research articles. "MorseGen" is a free data generator that…

  18. New values for some 4He I 1snl energy levels, ionization energies, and Lamb shifts

    International Nuclear Information System (INIS)

    Martin, W.C.

    1984-01-01

    Recent experimental determinations of energy separations within the 1snl term system (n = 2--6) have been used to reevaluate 35 levels. Most of the levels have estimated errors less than 0.001 cm -1 relative to the 2 3 P levels. Addition of accurate theoretical term values (ionization energies) available for several 1snl levels to the corresponding experimental level values gives generally consistent values for the principal ionization energy (E/sub I/). The theoretical energies are further confirmed by the agreement of the weighted average of seven of these E/sub I/ values with a value obtained by fitting Ritz formulas to three accurately determined 1snl series; the suggested new E/sub I/ is 198 310.7745(40) cm -1 on an energy scale fixed by the value 171 135.0000 cm -1 for 2 1 P. Lamb shifts are derived for the 2, 3, 4 3 S 1 , 2 1 S 0 , 2 3 P 1 , and 2 1 P 1 levels as differences between experimental term values obtained with the new E/sub I/ and corresponding calculated term values not including Lamb shifts. The experimental and calculated values for the 1s 2 1 S 0 ground level relative to the present 1snl excited-level system are 0.00 +- 0.15 and 0.073 +- 0.009 cm -1 , respectively, so that a approx.20-fold increase in the experimental accuracy would be required to test the calculated ground-level Lamb shift

  19. A statistical theory of cell killing by radiation of varying linear energy transfer

    International Nuclear Information System (INIS)

    Hawkins, R.B.

    1994-01-01

    A theory is presented that provides an explanation for the observed features of the survival of cultured cells after exposure to densely ionizing high-linear energy transfer (LET) radiation. It starts from a phenomenological postulate based on the linear-quadratic form of cell survival observed for low-LET radiation and uses principles of statistics and fluctuation theory to demonstrate that the effect of varying LET on cell survival can be attributed to random variation of dose to small volumes contained within the nucleus. A simple relation is presented for surviving fraction of cells after exposure to radiation of varying LET that depends on the α and β parameters for the same cells in the limit of low-LET radiation. This relation implies that the value of β is independent of LET. Agreement of the theory with selected observations of cell survival from the literature is demonstrated. A relation is presented that gives relative biological effectiveness (RBE) as a function of the α and β parameters for low-LET radiation. Measurements from microdosimetry are used to estimate the size of the subnuclear volume to which the fluctuation pertains. 11 refs., 4 figs., 2 tabs

  20. A hybrid finite element - statistical energy analysis approach to robust sound transmission modeling

    Science.gov (United States)

    Reynders, Edwin; Langley, Robin S.; Dijckmans, Arne; Vermeir, Gerrit

    2014-09-01

    When considering the sound transmission through a wall in between two rooms, in an important part of the audio frequency range, the local response of the rooms is highly sensitive to uncertainty in spatial variations in geometry, material properties and boundary conditions, which have a wave scattering effect, while the local response of the wall is rather insensitive to such uncertainty. For this mid-frequency range, a computationally efficient modeling strategy is adopted that accounts for this uncertainty. The partitioning wall is modeled deterministically, e.g. with finite elements. The rooms are modeled in a very efficient, nonparametric stochastic way, as in statistical energy analysis. All components are coupled by means of a rigorous power balance. This hybrid strategy is extended so that the mean and variance of the sound transmission loss can be computed as well as the transition frequency that loosely marks the boundary between low- and high-frequency behavior of a vibro-acoustic component. The method is first validated in a simulation study, and then applied for predicting the airborne sound insulation of a series of partition walls of increasing complexity: a thin plastic plate, a wall consisting of gypsum blocks, a thicker masonry wall and a double glazing. It is found that the uncertainty caused by random scattering is important except at very high frequencies, where the modal overlap of the rooms is very high. The results are compared with laboratory measurements, and both are found to agree within the prediction uncertainty in the considered frequency range.

  1. Continuous energy Monte Carlo calculations for randomly distributed spherical fuels based on statistical geometry model

    Energy Technology Data Exchange (ETDEWEB)

    Murata, Isao [Osaka Univ., Suita (Japan); Mori, Takamasa; Nakagawa, Masayuki; Itakura, Hirofumi

    1996-03-01

    The method to calculate neutronics parameters of a core composed of randomly distributed spherical fuels has been developed based on a statistical geometry model with a continuous energy Monte Carlo method. This method was implemented in a general purpose Monte Carlo code MCNP, and a new code MCNP-CFP had been developed. This paper describes the model and method how to use it and the validation results. In the Monte Carlo calculation, the location of a spherical fuel is sampled probabilistically along the particle flight path from the spatial probability distribution of spherical fuels, called nearest neighbor distribution (NND). This sampling method was validated through the following two comparisons: (1) Calculations of inventory of coated fuel particles (CFPs) in a fuel compact by both track length estimator and direct evaluation method, and (2) Criticality calculations for ordered packed geometries. This method was also confined by applying to an analysis of the critical assembly experiment at VHTRC. The method established in the present study is quite unique so as to a probabilistic model of the geometry with a great number of spherical fuels distributed randomly. Realizing the speed-up by vector or parallel computations in future, it is expected to be widely used in calculation of a nuclear reactor core, especially HTGR cores. (author).

  2. Enhancing multiphoton upconversion through energy clustering at sublattice level

    Science.gov (United States)

    Wang, Juan; Deng, Renren; MacDonald, Mark A.; Chen, Bolei; Yuan, Jikang; Wang, Feng; Chi, Dongzhi; Andy Hor, Tzi Sum; Zhang, Peng; Liu, Guokui; Han, Yu; Liu, Xiaogang

    2014-02-01

    The applications of lanthanide-doped upconversionnanocrystals in biological imaging, photonics, photovoltaics and therapeutics have fuelled a growing demand for rational control over the emission profiles of the nanocrystals. A common strategy for tuning upconversion luminescence is to control the doping concentration of lanthanide ions. However, the phenomenon of concentration quenching of the excited state at high doping levels poses a significant constraint. Thus, the lanthanide ions have to be stringently kept at relatively low concentrations to minimize luminescence quenching. Here we describe a new class of upconversion nanocrystals adopting an orthorhombic crystallographic structure in which the lanthanide ions are distributed in arrays of tetrad clusters. Importantly, this unique arrangement enables the preservation of excitation energy within the sublattice domain and effectively minimizes the migration of excitation energy to defects, even in stoichiometric compounds with a high Yb3+ content (calculated as 98 mol%). This allows us to generate an unusual four-photon-promoted violet upconversion emission from Er3+ with an intensity that is more than eight times higher than previously reported. Our results highlight that the approach to enhancing upconversion through energy clustering at the sublattice level may provide new opportunities for light-triggered biological reactions and photodynamic therapy.

  3. Enhancing multiphoton upconversion through energy clustering at sublattice level

    KAUST Repository

    Wang, Juan

    2013-11-24

    The applications of lanthanide-doped upconversionnanocrystals in biological imaging, photonics, photovoltaics and therapeutics have fuelled a growing demand for rational control over the emission profiles of the nanocrystals. A common strategy for tuning upconversion luminescence is to control the doping concentration of lanthanide ions. However, the phenomenon of concentration quenching of the excited state at high doping levels poses a significant constraint. Thus, the lanthanide ions have to be stringently kept at relatively low concentrations to minimize luminescence quenching. Here we describe a new class of upconversion nanocrystals adopting an orthorhombic crystallographic structure in which the lanthanide ions are distributed in arrays of tetrad clusters. Importantly, this unique arrangement enables the preservation of excitation energy within the sublattice domain and effectively minimizes the migration of excitation energy to defects, even in stoichiometric compounds with a high Yb 3+ content (calculated as 98 mol%). This allows us to generate an unusual four-photon-promoted violet upconversion emission from Er 3+ with an intensity that is more than eight times higher than previously reported. Our results highlight that the approach to enhancing upconversion through energy clustering at the sublattice level may provide new opportunities for light-triggered biological reactions and photodynamic therapy. © 2014 Macmillan Publishers Limited. All rights reserved.

  4. Statistical methods for determination of background levels for naturally occuring radionuclides in soil at a RCRA facility

    International Nuclear Information System (INIS)

    Guha, S.; Taylor, J.H.

    1996-01-01

    It is critical that summary statistics on background data, or background levels, be computed based on standardized and defensible statistical methods because background levels are frequently used in subsequent analyses and comparisons performed by separate analysts over time. The final background for naturally occurring radionuclide concentrations in soil at a RCRA facility, and the associated statistical methods used to estimate these concentrations, are presented. The primary objective is to describe, via a case study, the statistical methods used to estimate 95% upper tolerance limits (UTL) on radionuclide background soil data sets. A 95% UTL on background samples can be used as a screening level concentration in the absence of definitive soil cleanup criteria for naturally occurring radionuclides. The statistical methods are based exclusively on EPA guidance. This paper includes an introduction, a discussion of the analytical results for the radionuclides and a detailed description of the statistical analyses leading to the determination of 95% UTLs. Soil concentrations reported are based on validated data. Data sets are categorized as surficial soil; samples collected at depths from zero to one-half foot; and deep soil, samples collected from 3 to 5 feet. These data sets were tested for statistical outliers and underlying distributions were determined by using the chi-squared test for goodness-of-fit. UTLs for the data sets were then computed based on the percentage of non-detects and the appropriate best-fit distribution (lognormal, normal, or non-parametric). For data sets containing greater than approximately 50% nondetects, nonparametric UTLs were computed

  5. Energy levels and transition probabilities for Fe XXV ions

    Energy Technology Data Exchange (ETDEWEB)

    Norrington, P.H.; Kingston, A.E.; Boone, A.W. [Department of Applied Maths and Theoretical Physics, Queen' s University, Belfast BT7 1NN (United Kingdom)

    2000-05-14

    The energy levels of the 1s{sup 2}, 1s2l and 1s3l states of helium-like iron Fe XXV have been calculated using two sets of configuration-interaction wavefunctions. One set of wavefunctions was generated using the fully relativistic GRASP code and the other was obtained using CIV3, in which relativistic effects are introduced using the Breit-Pauli approximation. For transitions from the ground state to the n=2 and 3 states and for transitions between the n=2 and 3 states, the calculated excitation energies obtained by these two independent methods are in very good agreement and there is good agreement between these results and recent theoretical and experimental results. However, there is considerable disagreement between the various excitation energies for the transitions among the n=2 and also among the n=3 states. The two sets of wavefunctions are also used to calculate the E1, E2, M1 and M2 transition probabilities between all of the 1s{sup 2}, 1s2l and 1s3l states of helium-like iron Fe XXV. The results from the two calculations are found to be similar and to compare very well with other recent results for {delta}n=1 or 2 transitions. For {delta}n=0 transitions the agreement is much less satisfactory; this is mainly due to differences in the excitation energies. (author)

  6. Lagged Associations of Metropolitan Statistical Area- and State-Level Income Inequality with Cognitive Function: The Health and Retirement Study.

    Science.gov (United States)

    Kim, Daniel; Griffin, Beth Ann; Kabeto, Mohammed; Escarce, José; Langa, Kenneth M; Shih, Regina A

    2016-01-01

    Much variation in individual-level cognitive function in late life remains unexplained, with little exploration of area-level/contextual factors to date. Income inequality is a contextual factor that may plausibly influence cognitive function. In a nationally-representative cohort of older Americans from the Health and Retirement Study, we examined state- and metropolitan statistical area (MSA)-level income inequality as predictors of individual-level cognitive function measured by the 27-point Telephone Interview for Cognitive Status (TICS-m) scale. We modeled latency periods of 8-20 years, and controlled for state-/metropolitan statistical area (MSA)-level and individual-level factors. Higher MSA-level income inequality predicted lower cognitive function 16-18 years later. Using a 16-year lag, living in a MSA in the highest income inequality quartile predicted a 0.9-point lower TICS-m score (β = -0.86; 95% CI = -1.41, -0.31), roughly equivalent to the magnitude associated with five years of aging. We observed no associations for state-level income inequality. The findings were robust to sensitivity analyses using propensity score methods. Among older Americans, MSA-level income inequality appears to influence cognitive function nearly two decades later. Policies reducing income inequality levels within cities may help address the growing burden of declining cognitive function among older populations within the United States.

  7. Serum transferrin levels in children with protein-energy malnutrition

    Directory of Open Access Journals (Sweden)

    Selime Aydoğdu

    2013-03-01

    Full Text Available Objective: Although the diagnosis of patients with severemalnutrition is easy, it is very difficult to recognize patientswith mild and moderate malnutrition. A variety of methodsattempts to develop for early diagnosis of these cases.In this study, we evaluated the serum transferrin and albuminlevels in children with mild, moderate and severeprotein-energy malnutrition (PEM.Materials and methods: Children admitted to our policlinic,aged between 3 and 25 months, 45 subjects withPEM and 39 healthy subjects (control group were evaluated.According to the Gomez, Waterlow and Kanawatisubjects with PEM were divided in 3 subgroups mild,moderate and severe PEM. Anthropometric measurementsand biochemical results of 4 groups were compared.Results: For albumin levels in mild to moderate PEMgroups, 37.7% sensitivity, and 28.5% specificity, positivepredictive value 54%; negative predictive value 16.6%was found. For severe PEM sensitivity, specificity, positivepredictive value and negative predictive value were71%, 62.5%, 45%, and 83.3% respectively.With respect to the levels of transferrin, a significant differencewas found between mild PEM-control and moderatePEM-control groups (p0.05.Conclusion: Our study results showed that albumin isa weak indicator in mild-moderate PEM. In these cases,serum transferrin level reduces before decreasing of albuminlevel, thus it may be an early sensitive finding thatcan be used as a sensitive parameter in the diagnosis ofearly stages of malnutrition.Key words: Protein energy malnutrition, children, albumin,transferrin

  8. Assessing the Lexico-Grammatical Characteristics of a Corpus of College-Level Statistics Textbooks: Implications for Instruction and Practice

    Science.gov (United States)

    Wagler, Amy E.; Lesser, Lawrence M.; González, Ariel I.; Leal, Luis

    2015-01-01

    A corpus of current editions of statistics textbooks was assessed to compare aspects and levels of readability for the topics of "measures of center," "line of fit," "regression analysis," and "regression inference." Analysis with lexical software of these text selections revealed that the large corpus can…

  9. A Correlated Study of the Response of a Satellite to Acoustic Radiation Using Statistical Energy Analysis and Acoustic Test Data

    International Nuclear Information System (INIS)

    CAP, JEROME S.; TRACEY, BRIAN

    1999-01-01

    Aerospace payloads, such as satellites, are subjected to vibroacoustic excitation during launch. Sandia's MTI satellite has recently been certified to this environment using a combination of base input random vibration and reverberant acoustic noise. The initial choices for the acoustic and random vibration test specifications were obtained from the launch vehicle Interface Control Document (ICD). In order to tailor the random vibration levels for the laboratory certification testing, it was necessary to determine whether vibration energy was flowing across the launch vehicle interface from the satellite to the launch vehicle or the other direction. For frequencies below 120 Hz this issue was addressed using response limiting techniques based on results from the Coupled Loads Analysis (CLA). However, since the CLA Finite Element Analysis FEA model was only correlated for frequencies below 120 Hz, Statistical Energy Analysis (SEA) was considered to be a better choice for predicting the direction of the energy flow for frequencies above 120 Hz. The existing SEA model of the launch vehicle had been developed using the VibroAcoustic Payload Environment Prediction System (VAPEPS) computer code[1]. Therefore, the satellite would have to be modeled using VAPEPS as well. As is the case for any computational model, the confidence in its predictive capability increases if one can correlate a sample prediction against experimental data. Fortunately, Sandia had the ideal data set for correlating an SEA model of the MTI satellite--the measured response of a realistic assembly to a reverberant acoustic test that was performed during MTI's qualification test series. The first part of this paper will briefly describe the VAPEPS modeling effort and present the results of the correlation study for the VAPEPS model. The second part of this paper will present the results from a study that used a commercial SEA software package[2] to study the effects of in-plane modes and to evaluate

  10. National energy peak leveling program (NEPLP). Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    This multisectioned three-Volume report is responsive to the requirements of Contract E (04-3)-1152 to provide a detailed methodology, to include management, technology, and socio-economic aspects, of a voluntary community program of computer-assisted peak load leveling and energy conservation in commercial community facilities. The demonstration project established proof-of-concept in reducing the kW-demand peak by the unofficial goal of 10%, with concurrent kWh savings. This section of volume III contains appendixes of information on load shedding determination, analysis, socio-economic study, contractual cross references, and definitions.

  11. National energy peak leveling program (NEPLP). Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    This three-volume report is responsive to the requirements of contract E (04-3)-1152 to provide a detailed methodology, to include management, technology, and socio-economic aspects, of a voluntary community program for computer-assisted peak load leveling and energy conservation in commercial community facilities. The demonstration project established proof-of-concept in reducing the kW-demand peak by the unofficial goal of 10%, with concurrent kWh savings. The report consists of the following three volumes: Volume I: management overview; Volume II: methodology and technology; and Volume III; appendices.

  12. Energy statistics for one- and two-dwelling buildings in 2008; Energistatistik foer smaahus 2008

    Energy Technology Data Exchange (ETDEWEB)

    2009-09-15

    The survey of energy statistics in 2008 on one- and two-dwelling buildings, including agricultural one- and two-dwelling buildings, is based on a sample of 6 852 buildings. The survey was carried out as a mail survey in June 2008. The non-response rate was 39 percent. The presentation provides data on energy use, number of one- and two-dwelling buildings, and heated floor areas for the total population and for various subdivisions. During the last two years the number one- and two-dwelling buildings heated solely by district heating has greatly increased. The total use of district heating has increased by 32 percent. The use of oil for hot water and heating of one- and two dwelling buildings has decreased by 21 percent compared to 2007, and by 75 percent during the last five-year period. Nearly 40 percent of one- and two-dwelling buildings are heated completely or partially with a heat pump. However, the sharp increase in the number of heat pumps during the last five-year period has nearly come to a standstill in the last two years. About 42 percent of all one- and two-dwelling buildings in Sweden are heated by electricity as the only source of heat, including houses that are heated by heat pumps. Combined heating with electricity and biomass fuel is the second most common heating method, followed by heating with solely biomass fuel. 17 100 kWh electricity per household in one- and two-dwelling buildings heated by direct electricity exclusively and 18 800 kWh in one- and two dwelling buildings heated by water-borne electricity exclusively or 130 kWh per square metre of heated surface area (incl. electricity for household purposes). 2.5 cubic metres of oil per household in one- and two-dwelling buildings heated by oil exclusively or 18.7 litres of oil per square metre of heated surface area. 12.7 TWh electricity for households in one- and two-dwelling buildings, including the electricity used in combinations with other types of heating, but excluding electricity for

  13. Energy statistics for one- and two-dwelling buildings in 2007; Energistatistik foer smaahus 2007

    Energy Technology Data Exchange (ETDEWEB)

    2009-01-15

    The survey of energy statistics in 2007 on one- and two-dwelling buildings, including agricultural one- and two-dwelling buildings, is based on a sample of 6,849 buildings. The survey was carried out as a mail survey in June 2007. The non-response rate was 37 percent. The presentation provides data on energy use, number of one- and two-dwelling buildings, and heated floor areas for the total population and for various subdivisions. The use of oil for hot water and heating of one- and two-dwelling buildings has decreased by 23 percent compared to 2006, and by 71 percent the last 5 years. The number of air heat pumps increased by 41 per cent compared to 2006 and the total number of heat pumps increased from over 500 000 to over 650 000. More than 45 percent of the one- and two-dwelling buildings are heated by electricity exclusively, including buildings heated by air heat pump. About 20 percent are heated by a combination of bio fuel and electricity and about 3 percent are heated by oil exclusively. 17,200 kWh electricity per household in one- and two-dwelling buildings heated by direct electricity exclusively and 20,300 kWh in one- and two-dwelling buildings heated by water-borne electricity exclusively or 132 kWh per square metre of heated surface area (incl. electricity for household purposes). 2.8 cubic metres of oil per household in one- and two-dwelling buildings heated by oil exclusively or 19.9 litres of oil per square metre of heated surface area. 13.5 TWh electricity for households in one- and two-dwelling buildings, including the electricity used in combinations with other types of heating, but excluding electricity for household purposes which is estimated to 10,4 TWh. 258,000 cubic metres of oil (about 2.6 TWh) for households in one- and two-dwelling buildings. This includes mixed heating. 6.6 millions cubic metres of firewood in one- and two-dwelling buildings, 975,000 cubic metres of wood chips and 461,000 tons of pellets. This amount corresponds to 11

  14. New statistical methodology, mathematical models, and data bases relevant to the assessment of health impacts of energy technologies

    International Nuclear Information System (INIS)

    Ginevan, M.E.; Collins, J.J.; Brown, C.D.; Carnes, B.A.; Curtiss, J.B.; Devine, N.

    1981-01-01

    The present research develops new statistical methodology, mathematical models, and data bases of relevance to the assessment of health impacts of energy technologies, and uses these to identify, quantify, and pedict adverse health effects of energy related pollutants. Efforts are in five related areas including: (1) evaluation and development of statistical procedures for the analysis of death rate data, disease incidence data, and large scale data sets; (2) development of dose response and demographic models useful in the prediction of the health effects of energy technologies; (3) application of our method and models to analyses of the health risks of energy production; (4) a reanalysis of the Tri-State leukemia survey data, focusing on the relationship between myelogenous leukemia risk and diagnostic x-ray exposure; and (5) investigation of human birth weights as a possible early warning system for the effects of environmental pollution

  15. Spectrum and energy levels of four-times-ionized niobium

    International Nuclear Information System (INIS)

    Kagan, D.T.; Conway, J.G.; Meinders, E.

    1981-01-01

    The 4p 6 nl spectrum of Nb 4+ was measured and analyzed. The spectrum was excited in a vacuum sliding spark source with a peak current of 800 A and a pulse width of 70 μsec. The analysis of the spectrum has extended the 12 known lines to 84 and the 10 known levels to 30. The ionization energy was calculated to be 407897 +- 40 cm -1 . There is strong evidence that the 4p 5 4d 2 configurations interacts strongly with the 4p 6 nf configuration. In addition, the hyperfine splitting of the 4p 6 6s level has been observed and measured to be 1.1 cm -1

  16. The intermediates take it all: asymptotics of higher criticism statistics and a powerful alternative based on equal local levels.

    Science.gov (United States)

    Gontscharuk, Veronika; Landwehr, Sandra; Finner, Helmut

    2015-01-01

    The higher criticism (HC) statistic, which can be seen as a normalized version of the famous Kolmogorov-Smirnov statistic, has a long history, dating back to the mid seventies. Originally, HC statistics were used in connection with goodness of fit (GOF) tests but they recently gained some attention in the context of testing the global null hypothesis in high dimensional data. The continuing interest for HC seems to be inspired by a series of nice asymptotic properties related to this statistic. For example, unlike Kolmogorov-Smirnov tests, GOF tests based on the HC statistic are known to be asymptotically sensitive in the moderate tails, hence it is favorably applied for detecting the presence of signals in sparse mixture models. However, some questions around the asymptotic behavior of the HC statistic are still open. We focus on two of them, namely, why a specific intermediate range is crucial for GOF tests based on the HC statistic and why the convergence of the HC distribution to the limiting one is extremely slow. Moreover, the inconsistency in the asymptotic and finite behavior of the HC statistic prompts us to provide a new HC test that has better finite properties than the original HC test while showing the same asymptotics. This test is motivated by the asymptotic behavior of the so-called local levels related to the original HC test. By means of numerical calculations and simulations we show that the new HC test is typically more powerful than the original HC test in normal mixture models. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Energy efficiency, human behavior, and economic growth: Challenges to cutting energy demand to sustainable levels

    Science.gov (United States)

    Santarius, Tilman

    2015-03-01

    Increasing energy efficiency in households, transportation, industries, and services is an important strategy to reduce energy service demand to levels that allow the steep reduction of greenhouse gases, and a full fledged switch of energy systems to a renewable basis. Yet, technological efficiency improvements may generate so-called rebound effects, which may `eat up' parts of the technical savings potential. This article provides a comprehensive review of existing research on these effects, raises critiques, and points out open questions. It introduces micro-economic rebound effect and suggests extending consumer-side analysis to incorporate potential `psychological rebound effects.' It then discusses meso-economic rebound effects, i.e. producer-side and market-level rebounds, which so far have achieved little attention in the literature. Finally, the article critically reviews evidence for macro-economic rebound effects as energy efficiency-induced economic growth impacts. For all three categories, the article summarizes assessments of their potential quantitative scope, while pointing out remaining methodological weaknesses and open questions. As a rough "rule of thumb", in the long term and on gross average, only half the technical savings potential of across-the-board efficiency improvements may actually be achieved in the real world. Policies that aim at cutting energy service demand to sustainable levels are well advised to take due note of detrimental behavioral and economic growth impacts, and should foster policies and measures that can contain them.

  18. Energy efficiency, human behavior, and economic growth: Challenges to cutting energy demand to sustainable levels

    Energy Technology Data Exchange (ETDEWEB)

    Santarius, Tilman, E-mail: tilman@santarius.de [Visiting Scholar, Institute of European Studies and Energy and Resources Group, University of California, Berkeley, 310 Barrows Hall, Berkeley, CA 94720-3050 (United States)

    2015-03-30

    Increasing energy efficiency in households, transportation, industries, and services is an important strategy to reduce energy service demand to levels that allow the steep reduction of greenhouse gases, and a full fledged switch of energy systems to a renewable basis. Yet, technological efficiency improvements may generate so-called rebound effects, which may ‘eat up’ parts of the technical savings potential. This article provides a comprehensive review of existing research on these effects, raises critiques, and points out open questions. It introduces micro-economic rebound effect and suggests extending consumer-side analysis to incorporate potential ‘psychological rebound effects.’ It then discusses meso-economic rebound effects, i.e. producer-side and market-level rebounds, which so far have achieved little attention in the literature. Finally, the article critically reviews evidence for macro-economic rebound effects as energy efficiency-induced economic growth impacts. For all three categories, the article summarizes assessments of their potential quantitative scope, while pointing out remaining methodological weaknesses and open questions. As a rough “rule of thumb”, in the long term and on gross average, only half the technical savings potential of across-the-board efficiency improvements may actually be achieved in the real world. Policies that aim at cutting energy service demand to sustainable levels are well advised to take due note of detrimental behavioral and economic growth impacts, and should foster policies and measures that can contain them.

  19. Statistics of A-weighted road traffic noise levels in shielded urban areas

    NARCIS (Netherlands)

    Forssén, J.; Hornikx, M.C.J.

    2006-01-01

    In the context of community noise and its negative effects, the noise descriptors used are usually long-term equivalent levels and, sometimes, maximum levels. An improved description could be achieved by including the time variations of the noise. Here, the time variations of A-weighted road traffic

  20. Constructivist and Behaviorist Approaches: Development and Initial Evaluation of a Teaching Practice Scale for Introductory Statistics at the College Level

    Directory of Open Access Journals (Sweden)

    Rossi A. Hassad

    2011-07-01

    Full Text Available This study examined the teaching practices of 227 college instructors of introductory statistics from the health and behavioral sciences. Using primarily multidimensional scaling (MDS techniques, a two-dimensional, 10-item teaching-practice scale, TISS (Teaching of Introductory Statistics Scale, was developed. The two dimensions (subscales are characterized as constructivist and behaviorist; they are orthogonal. Criterion validity of the TISS was established in relation to instructors’ attitude toward teaching, and acceptable levels of reliability were obtained. A significantly higher level of behaviorist practice (less reform-oriented was reported by instructors from the U.S., as well as instructors with academic degrees in mathematics and engineering, whereas those with membership in professional organizations, tended to be more reform-oriented (or constructivist. The TISS, thought to be the first of its kind, will allow the statistics education community to empirically assess and describe the pedagogical approach (teaching practice of instructors of introductory statistics in the health and behavioral sciences, at the college level, and determine what learning outcomes result from the different teaching-practice orientations. Further research is required in order to be conclusive about the structural and psychometric properties of this scale, including its stability over time.

  1. Efficient Energy Consumption Scheduling: Towards Effective Load Leveling

    Directory of Open Access Journals (Sweden)

    Yuan Hong

    2017-01-01

    Full Text Available Different agents in the smart grid infrastructure (e.g., households, buildings, communities consume energy with their own appliances, which may have adjustable usage schedules over a day, a month, a season or even a year. One of the major objectives of the smart grid is to flatten the demand load of numerous agents (viz. consumers, such that the peak load can be avoided and power supply can feed the demand load at anytime on the grid. To this end, we propose two Energy Consumption Scheduling (ECS problems for the appliances held by different agents at the demand side to effectively facilitate load leveling. Specifically, we mathematically model the ECS problems as Mixed-Integer Programming (MIP problems using the data collected from different agents (e.g., their appliances’ energy consumption in every time slot and the total number of required in-use time slots, specific preferences of the in-use time slots for their appliances. Furthermore, we propose a novel algorithm to efficiently and effectively solve the ECS problems with large-scale inputs (which are NP-hard. The experimental results demonstrate that our approach is significantly more efficient than standard benchmarks, such as CPLEX, while guaranteeing near-optimal outputs.

  2. Effects of statistical models and items difficulties on making trait-level inferences: A simulation study

    Directory of Open Access Journals (Sweden)

    Nelson Hauck Filho

    2014-12-01

    Full Text Available Researchers dealing with the task of estimating locations of individuals on continuous latent variables may rely on several statistical models described in the literature. However, weighting costs and benefits of using one specific model over alternative models depends on empirical information that is not always clearly available. Therefore, the aim of this simulation study was to compare the performance of seven popular statistical models in providing adequate latent trait estimates in conditions of items difficulties targeted at the sample mean or at the tails of the latent trait distribution. Results suggested an overall tendency of models to provide more accurate estimates of true latent scores when using items targeted at the sample mean of the latent trait distribution. Rating Scale Model, Graded Response Model, and Weighted Least Squares Mean- and Variance-adjusted Confirmatory Factor Analysis yielded the most reliable latent trait estimates, even when applied to inadequate items for the sample distribution of the latent variable. These findings have important implications concerning some popular methodological practices in Psychology and related areas.

  3. Energy Levels, wavelengths and hyperfine structure measurements of Sc II

    Science.gov (United States)

    Hala, Fnu; Nave, Gillian

    2018-01-01

    Lines of singly ionized Scandium (Sc II) along with other Iron group elements have been observed [1] in the region surrounding the massive star Eta Carinae [2,3] called the strontium filament (SrF). The last extensive analysis of Sc II was the four-decade old work of Johansson & Litzen [4], using low-resolution grating spectroscopy. To update and extend the Sc II spectra, we have made observation of Sc/Ar, Sc/Ne and Sc/Ge/Ar hollow cathode emission spectrum on the NIST high resolution FT700 UV/Vis and 2 m UV/Vis/IR Fourier transform spectrometers (FTS). More than 850 Sc II lines have been measured in the wavelength range of 187 nm to 3.2 μm. connecting a total of 152 energy levels. The present work also focuses to resolve hyperfine structure (HFS) in Sc II lines. We aim to obtain accurate transition wavelengths, improved energy levels and HFS constants of Sc II. The latest results from work in progress will be presented.Reference[1] Hartman H, Gull T, Johansson S and Smith N 2004 Astron. Astrophys. 419 215[2] Smith N, Morse J A and Gull T R 2004 Astrophys. J. 605 405[3] Davidson K and Humphreys R M 1997 Annu. Rev. Astron. Astrophys. 35[4] Johansson S and Litzén U 1980 Phys. Scr. 22 49

  4. Calculation of almost all energy levels of baryons

    Directory of Open Access Journals (Sweden)

    Mario Everaldo de Souza

    2011-03-01

    Full Text Available It is considered that the effective  interaction between any two quarks of a baryon can be approximately described by a simple harmonic potential. The problem is firstly solved in Cartesian coordinates in order to find the energy levels irrespective of their angular momenta. Then, the problem is also solved in polar cylindrical coordinates in order to take into account the angular momenta of the levels. Comparing the two solutions, a correspondence is made between the angular momenta and parities for almost all experimentally determined levels. The agreement with the experimental data is quite impressive and, in general, the discrepancy between calculated and experimental values is below 5%. A couple of levels of $Delta$, $N$, $Sigma^{pm}$, and $Omega$ present discrepacies between 6.7% and 12.5% ($N(1655$, $N(1440$, $N(1675$, $N(1685$, $N(1700$, $N(1710$, $N(1720$, $N(1990$, $N(2600$, $Delta(1700$, $Delta(2000$, $Delta(2300$, $Sigma^{pm}(1189$, $Lambda(1520$, $Omega(1672$ and $Omega(2250$.Received: 6 June 2011, Accepted: 13 July 2011; Edited by: D. Restrepo; Reviewed by: J. H. Muñoz, Universidad del Tolima, Ibagué, Colombia and Centro Brasileiro de Pesquisas Fisica; DOI: http://dx.doi.org/10.4279/PIP.030003Cite as: M. E. de Souza, Papers in Physics 3, 030003 (2011

  5. Processes of energy recovery / energy valorization at low temperature levels. State of the art. Extended abstract

    International Nuclear Information System (INIS)

    Manificat, A.; Megret, O.

    2012-09-01

    This study aims to realize a state of art of the processes of energy recovery at low level of temperature and their valorizations. The information provided will target particularly the thermal systems of waste and biomass treatment. After reminding the adequate context of development with these solutions and define the scope of the current work, the study begins with the definition of different concepts such as low-grade heat (fatal energy) and exergy, and also the presentation of the fiscal environment as well as the economic and regulatory situation, with information about the TGAP, prices of energy and energy efficiency. The second chapter focuses on the different sources of energy at low temperature level that can be recoverable in order to assess their potentials and their characteristics. The Determination of the temperature range of these energy sources will be put in relation with the needs and demands of users from different industrial sectors. The third part of the study is a review of various technologies for energy recovery and valorization at low temperature. It is useful to distinguish different types of heat exchangers interesting to implement. Moreover, innovative processes allow us to consider new perspectives other than a direct use of heat recovered. For example, we can take into account systems for producing electricity (ORC cycle, hot air engines, thermoelectric conversion), or cold generation (sorption refrigeration machine, Thermo-ejector refrigeration machine) or techniques for energy storage with PCM (Phase Change Material). The last chapter deals to the achievement of four study cases written in the form of sheet and aimed at assess the applicability of the processes previously considered, concerning the field of waste. (authors)

  6. Community Energy: Analysis of Hydrogen Distributed Energy Systems with Photovoltaics for Load Leveling and Vehicle Refueling

    Energy Technology Data Exchange (ETDEWEB)

    Steward, D.; Zuboy, J.

    2014-10-01

    Energy storage could complement PV electricity generation at the community level. Because PV generation is intermittent, strategies must be implemented to integrate it into the electricity system. Hydrogen and fuel cell technologies offer possible PV integration strategies, including the community-level approaches analyzed in this report: (1) using hydrogen production, storage, and reconversion to electricity to level PV generation and grid loads (reconversion scenario); (2) using hydrogen production and storage to capture peak PV generation and refuel hydrogen fuel cell electric vehicles (FCEVs) (hydrogen fueling scenario); and (3) a comparison scenario using a battery system to store electricity for EV nighttime charging (electric charging scenario).

  7. Survey of statistical and sampling needs for environmental monitoring of commercial low-level radioactive waste disposal facilities

    International Nuclear Information System (INIS)

    Eberhardt, L.L.; Thomas, J.M.

    1986-07-01

    This project was designed to develop guidance for implementing 10 CFR Part 61 and to determine the overall needs for sampling and statistical work in characterizing, surveying, monitoring, and closing commercial low-level waste sites. When cost-effectiveness and statistical reliability are of prime importance, then double sampling, compositing, and stratification (with optimal allocation) are identified as key issues. If the principal concern is avoiding questionable statistical practice, then the applicability of kriging (for assessing spatial pattern), methods for routine monitoring, and use of standard textbook formulae in reporting monitoring results should be reevaluated. Other important issues identified include sampling for estimating model parameters and the use of data from left-censored (less than detectable limits) distributions

  8. Energy balance of lactating primiparous sows as affected by feeding level and dietary energy source

    OpenAIRE

    Brand, van den, H.; Heetkamp, M.J.W.; Soede, N.M.; Schrama, J.W.; Kemp, B.

    2000-01-01

    The effects of feeding level and major dietary energy source used during lactation on sow milk composition, piglet body composition, and energy balance of sows were determined. During a 21-d lactation, 48 primiparous sows were fed either a Fat-rich (134.9 g/kg fat; 196.8 g/kg carbohydrate) or a Starch-rich (33.2 g/kg fat; 380.9 g/kg carbohydrate) diet at either a High (44 MJ NE/d; 1,050 g protein/d) or a Low (33 MJ NE/d; 790 g protein/d) feeding level. Within each feeding level, the two diets...

  9. Number projected statistics and the pairing correlations at high excitation energies

    International Nuclear Information System (INIS)

    Esebbag, C.; Egido, J.L.

    1993-01-01

    We analyze the use of particle-number projected statistics (PNPS) as an effective way to include the quantum and statistical fluctuations, associated with the pairing degree of freedom, left out in finite-temperature mean-field theories. As a numerical application the exact-soluble degenerate model is worked out. In particular, we find that the sharp temperature-induced superfluid-normal phase transition, predicted in the mean-field approximations, is washed out in the PNPS. Some approximations as well as the Landau prescription to include statistical fluctuations are also discussed. We find that the Landau prescription provides a reasonable approximation to the PNPS. (orig.)

  10. Resource Allocation of Security-Critical Tasks with Statistically Guaranteed Energy Constraint

    DEFF Research Database (Denmark)

    Jiang, Wei; Jiang, Ke; Ma, Yue

    2012-01-01

    In this paper, we are interested in resource allocation for energy constrained and security-critical embedded systems. Tasks in such systems need to be successfully executed under certain energy budget and be robust against serious security threatens. Different to former energy minimal scheduling...... energy slack ratio. The proposed algorithm is very efficient in both time and space dimensions, and achieves good solutions. Extensive simulations demonstrate the superiority of our algorithm over other approaches....

  11. Assessment of building integrated energy supply and energy saving schemes on a national level in Denmark

    Energy Technology Data Exchange (ETDEWEB)

    Muenster, M.; Morthorst, P.E.; Birkl, C.

    2011-06-15

    In the future, buildings will not only act as consumers of energy but as producers as well. For these ''prosumers'', energy production by use of solar panels, photovoltaics and heat pumps etc will be essential. The objective of this project was to find the most optimal combinations of building insulation and use of renewable energy sources in existing buildings in terms of economics and climate impacts. Five houses were analyzed based on different personal load, consumption profiles, solar orientation and proposed building envelope improvements and use of combinations of renewable energy systems. The results of these analyses were integrated in five scenarios to examine the consequences at national level of implementing insulation together with solar panels, photovoltaics and heat pumps in single-family houses. The simulations focused on the building period between 1961 and 1972 characterised by high building activity and low energy performance. The five scenarios - a baseline scenario, a maximum savings scenario, a maximum production scenario, and a combination scenario - showed that regardless of scenario, a consequent use of individual heat pumps leads to the greatest energy savings and CO{sub 2} reductions. (ln)

  12. CutL: an alternative to Kulldorff's scan statistics for cluster detection with a specified cut-off level.

    Science.gov (United States)

    Więckowska, Barbara; Marcinkowska, Justyna

    2017-11-06

    When searching for epidemiological clusters, an important tool can be to carry out one's own research with the incidence rate from the literature as the reference level. Values exceeding this level may indicate the presence of a cluster in that location. This paper presents a method of searching for clusters that have significantly higher incidence rates than those specified by the investigator. The proposed method uses the classic binomial exact test for one proportion and an algorithm that joins areas with potential clusters while reducing the number of multiple comparisons needed. The sensitivity and specificity are preserved by this new method, while avoiding the Monte Carlo approach and still delivering results comparable to the commonly used Kulldorff's scan statistics and other similar methods of localising clusters. A strong contributing factor afforded by the statistical software that makes this possible is that it allows analysis and presentation of the results cartographically.

  13. Statistical Evaluation of the Emissions Level Of CO, CO2 and HC Generated by Passenger Cars

    Directory of Open Access Journals (Sweden)

    Claudiu Ursu

    2014-12-01

    Full Text Available This paper aims to make an evaluation of differences emission level of CO, CO2 and HC generated by passenger cars in different walking regimes and times, to identify measures of reducing pollution. Was analyzed a sample of Dacia Logan passenger cars (n = 515, made during the period 2004-2007, equipped with spark ignition engines, assigned to emission standards EURO 3 (E3 and EURO4 (E4. These cars were evaluated at periodical technical inspection (ITP by two times in the two walk regimes (slow idle and accelerated idle. Using the t test for paired samples (Paired Samples T Test, the results showed that there are significant differences between emissions levels (CO, CO2, HC generated by Dacia Logan passenger cars at both assessments, and regression analysis showed that these differences are not significantly influenced by turnover differences.

  14. Does mental health staffing level affect antipsychotic prescribing? Analysis of Italian national statistics.

    Science.gov (United States)

    Starace, Fabrizio; Mungai, Francesco; Barbui, Corrado

    2018-01-01

    In mental healthcare, one area of major concern identified by health information systems is variability in antipsychotic prescribing. While most studies have investigated patient- and prescriber-related factors as possible reasons for such variability, no studies have investigated facility-level characteristics. The present study ascertained whether staffing level is associated with antipsychotic prescribing in community mental healthcare. A cross-sectional analysis of data extracted from the Italian national mental health information system was carried out. For each Italian region, it collects data on the availability and use of mental health facilities. The rate of individuals exposed to antipsychotic drugs was tested for evidence of association with the rate of mental health staff availability by means of univariate and multivariate analyses. In Italy there were on average nearly 60 mental health professionals per 100,000 inhabitants, with wide regional variations (range 21 to 100). The average rate of individuals prescribed antipsychotic drugs was 2.33%, with wide regional variations (1.04% to 4.01%). Univariate analysis showed that the rate of individuals prescribed antipsychotic drugs was inversely associated with the rate of mental health professionals available in Italian regions (Kendall's tau -0.438, p = 0.006), with lower rates of antipsychotic prescriptions in regions with higher rates of mental health professionals. After adjustment for possible confounders, the total availability of mental health professionals was still inversely associated with the rate of individuals exposed to antipsychotic drugs. The evidence that staffing level was inversely associated with antipsychotic prescribing indicates that any actions aimed at decreasing variability in antipsychotic prescribing need to take into account aspects related to the organization of the mental health system.

  15. Statistical analysis for discrimination of prompt gamma ray peak induced by high energy neutron: Monte Carlo simulation study

    International Nuclear Information System (INIS)

    Do-Kun Yoon; Joo-Young Jung; Tae Suk Suh; Seong-Min Han

    2015-01-01

    The purpose of this research is a statistical analysis for discrimination of prompt gamma ray peak induced by the 14.1 MeV neutron particles from spectra using Monte Carlo simulation. For the simulation, the information of 18 detector materials was used to simulate spectra by the neutron capture reaction. The discrimination of nine prompt gamma ray peaks from the simulation of each detector material was performed. We presented the several comparison indexes of energy resolution performance depending on the detector material using the simulation and statistics for the prompt gamma activation analysis. (author)

  16. Survey of energy load leveling system in Europe; Energy fuka heijunka taisaku ni kansuru Europe chosa

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Y. [Setsunan University, Osaka (Japan). Faculty of Engineering

    1998-05-05

    This paper describes the survey of energy load leveling systems in Europe. In Denmark, especially regional heating is remarkably diffused, and they have 350 plants. With extending the service areas, the energy load leveling has been promoted. For the cogeneration plants of SK Power, the largest electric power company, they have hot water heat storage tanks for regional heat supply with a total capacity 2,200 MWh. The regional heating system in Goeteborg City of Sweden supplies 80% of the total heat demand of the city. Unused energy sources derived from petroleum refining, sewage treatment, and garbage burning are utilized. In Uppsala, they have seasonal heat storage systems using solar heat. The Vienna Regional Heat Supply Corporation supplies heat equivalent to 5,000 GWh a year. Cogeneration plants and garbage burning plants are used as heat sources, and 25% of the total heating in the city is supplied. In Austria, they have an electric power demand with a peak in winter, and they have a pumped-storage power station in Kaprun for the annual load leveling using dump power in summer. This paper also introduces a compressed air storage gas turbine plant at Huntorf of Germany, and a large-scale underground natural gas storage of Gaz de France. 6 figs.

  17. Southern hemisphere low level wind circulation statistics from the Seasat scatterometer

    Science.gov (United States)

    Levy, Gad

    1994-01-01

    Analyses of remotely sensed low-level wind vector data over the Southern Ocean are performed. Five-day averages and monthly means are created and the month-to-month variability during the winter (July-September) of 1978 is investigated. The remotely sensed winds are compared to the Australian Bureau of Meteorology (ABM) and the National Meteorological Center (NMC) surface analyses. In southern latitudes the remotely sensed winds are stronger than what the weather services' analyses suggest, indicating under-estimation by ABM and NMC in these regions. The evolution of the low-level jet and the major stormtracks during the season are studied and different flow regimes are identified. The large-scale variability of the meridional flow is studied with the aid of empirical orthogonal function (EOF) analysis. The dominance of quasi-stationary wave numbers 3,4, and 5 in the winter flows is evident in both the EOF analysis and the mean flow. The signature of an exceptionally strong blocking situation is evident in July and the special conditions leading to it are discussed. A very large intraseasonal variability with different flow regimes at different months is documented.

  18. Innovations in Multi-Level Governance for Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    Recent IEA analysis highlights member countries' significant progress with developing energy efficiency policy (International Energy Agency 2009). The 28 member countries of the IEA are engaged in promoting innovative financial instruments, energy efficiency strategies and action plans. They are designing policies to promote energy efficiency in buildings, the adoption of standby power, the phase out of inefficient lighting, proper tyre-inflation and related policies, and energy efficiency in utilities.

  19. Innovations in Multi-Level Governance for Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    Recent IEA analysis highlights member countries' significant progress with developing energy efficiency policy (International Energy Agency 2009). The 28 member countries of the IEA are engaged in promoting innovative financial instruments, energy efficiency strategies and action plans. They are designing policies to promote energy efficiency in buildings, the adoption of standby power, the phase out of inefficient lighting, proper tyre-inflation and related policies, and energy efficiency in utilities.

  20. Energy utilization of light and heavy weaned piglets subjected to different dietary energy levels

    Directory of Open Access Journals (Sweden)

    Andréa Machado Leal Ribeiro

    Full Text Available ABSTRACT This study was conducted to evaluate the effects of dietary metabolisable energy (ME: 3.25, 3.40, 3.55, or 3.70 Mcal kg−1 and weaning weight (WW: light 4.0±0.7 kg, and heavy: 6.3±0.6 kg on productive response and energy utilization of weaned piglets. Sixty-four male piglets were housed in 32 metabolic cages (two animals per cage during the first 14 d postweaning. At day 15, only one animal per cage was kept until day 28. Body composition, energy, and nutrient deposition rates and energy utilization efficiency were measured through a comparative slaughter procedure. Piglets with light WW had a poorer feed conversion ratio and lower weight gain and feed intake when expressed per live weight. Increased ME led to greater daily fat deposition in the empty bodies (defined as weighted mean of the carcass + organs + blood, no intestinal content, while light WW piglets had a reduced protein deposition. Light WW piglets increased heat production with increased ME, but no effect was seen for the heavy WW piglets. By contrast, heavy WW piglets increased empty body gross energy as ME increased, while no influence was observed on light WW piglets. Increasing dietary energy levels did not contribute to the subsequent growth performance of piglets that were lighter at weaning. The lack of interaction between weaning weight and dietary ME content on growth performance does not support the hypothesis that light piglets at weaning do not exhibit compensatory growth because of limitations in energy intake.

  1. Implementation of the new statistics approach on final energy consumption of biomass in household sector in three countries: Croatia, Bosnia and Herzegovina and Macedonia

    International Nuclear Information System (INIS)

    Kos Grabar Robina, Vlatka; Kinderman Lončarević, Alenka

    2017-01-01

    Highlights: • Improved way of collection of data on fuelwood consumption in households. • Quality and accuracy of statistical energy balance can be improved. • Accurate energy statistics is necessary for analysis of future energy demand. • Survey results and methods applied are presented for three selected countries. - Abstract: The aim of this paper is to present an improved way of collection and compilation of data about solid biomass consumption in households in order to improve accuracy of official energy statistics data. The accurate, timely and reliable energy data significantly contribute to the consistency in national energy statistics, energy balance, as well as for many other obligatory reporting procedures which are requested and prescribed by national and international standards. When compiling energy statistics, statistics on renewables, particularly biomass consumption, it is often the most questionable as little or no available official data exists in the country. According to the international standards and definitions, solid biomass covers organic, non-fossil material of biological origin which may be used as fuel for heat production or electricity generation. In households, the most commonly used biomass are fuelwood and wood residues. In the process of compiling national energy statistics, national institutions responsible for official energy statistics usually estimate biomass consumption based on the reports on fuelwood cuts in state forests and official biomass production, although it is known that consumption is much higher. Over the past two decades, Energy Institute Hrvoje Požar worked intensively on the energy consumption data collection and particularly on the development of the tailored-made surveying methods for different final energy consumption sectors, particularly for the household sector. The similar methods were recommended to national statistics institutes in the countries in the region when providing technical

  2. Evaluation of image quality and radiation dose by adaptive statistical iterative reconstruction technique level for chest CT examination.

    Science.gov (United States)

    Hong, Sun Suk; Lee, Jong-Woong; Seo, Jeong Beom; Jung, Jae-Eun; Choi, Jiwon; Kweon, Dae Cheol

    2013-12-01

    The purpose of this research is to determine the adaptive statistical iterative reconstruction (ASIR) level that enables optimal image quality and dose reduction in the chest computed tomography (CT) protocol with ASIR. A chest phantom with 0-50 % ASIR levels was scanned and then noise power spectrum (NPS), signal and noise and the degree of distortion of peak signal-to-noise ratio (PSNR) and the root-mean-square error (RMSE) were measured. In addition, the objectivity of the experiment was measured using the American College of Radiology (ACR) phantom. Moreover, on a qualitative basis, five lesions' resolution, latitude and distortion degree of chest phantom and their compiled statistics were evaluated. The NPS value decreased as the frequency increased. The lowest noise and deviation were at the 20 % ASIR level, mean 126.15 ± 22.21. As a result of the degree of distortion, signal-to-noise ratio and PSNR at 20 % ASIR level were at the highest value as 31.0 and 41.52. However, maximum absolute error and RMSE showed the lowest deviation value as 11.2 and 16. In the ACR phantom study, all ASIR levels were within acceptable allowance of guidelines. The 20 % ASIR level performed best in qualitative evaluation at five lesions of chest phantom as resolution score 4.3, latitude 3.47 and the degree of distortion 4.25. The 20 % ASIR level was proved to be the best in all experiments, noise, distortion evaluation using ImageJ and qualitative evaluation of five lesions of a chest phantom. Therefore, optimal images as well as reduce radiation dose would be acquired when 20 % ASIR level in thoracic CT is applied.

  3. Energy statistics of apartment buildings in 2012; Energistatistik foer flerbostadshus 2012

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-07-01

    This report presents data regarding energy used for heating and hot water in Swedish apartment buildings (2012) in terms of heated floor area, use of energy (totals and averages) and use of fuels (totals and averages) for the total population and for various subDivs.

  4. Continuum corrections to the level density and its dependence on excitation energy, n-p asymmetry, and deformation

    International Nuclear Information System (INIS)

    Charity, R.J.; Sobotka, L.G.

    2005-01-01

    In the independent-particle model, the nuclear level density is determined from the neutron and proton single-particle level densities. The single-particle level density for the positive-energy continuum levels is important at high excitation energies for stable nuclei and at all excitation energies for nuclei near the drip lines. This single-particle level density is subdivided into compound-nucleus and gas components. Two methods are considered for this subdivision: In the subtraction method, the single-particle level density is determined from the scattering phase shifts. In the Gamov method, only the narrow Gamov states or resonances are included. The level densities calculated with these two methods are similar; both can be approximated by the backshifted Fermi-gas expression with level-density parameters that are dependent on A, but with very little dependence on the neutron or proton richness of the nucleus. However, a small decrease in the level-density parameter is predicted for some nuclei very close to the drip lines. The largest difference between the calculations using the two methods is the deformation dependence of the level density. The Gamov method predicts a very strong peaking of the level density at sphericity for high excitation energies. This leads to a suppression of deformed configurations and, consequently, the fission rate predicted by the statistical model is reduced in the Gamov method

  5. Statistics of energy levels and zero temperature dynamics for deterministic spin models with glassy behaviour

    NARCIS (Netherlands)

    Degli Esposti, M.; Giardinà, C.; Graffi, S.; Isola, S.

    2001-01-01

    We consider the zero-temperature dynamics for the infinite-range, non translation invariant one-dimensional spin model introduced by Marinari, Parisi and Ritort to generate glassy behaviour out of a deterministic interaction. It is argued that there can be a large number of metastable (i.e.,

  6. Enzymatic versus Inorganic Oxygen Reduction Catalysts: Comparison of the Energy Levels in a Free-Energy Scheme

    DEFF Research Database (Denmark)

    Kjærgaard, Christian Hauge; Rossmeisl, Jan; Nørskov, Jens Kehlet

    2010-01-01

    In this paper, we present a method to directly compare the energy levels of intermediates in enzymatic and inorganic oxygen reduction catalysts. We initially describe how the energy levels of a Pt(111) catalyst, operating at pH = 0, are obtained. By a simple procedure, we then convert the energy...... levels of cytochrome c oxidase (CcO) models obtained at physiological pH = 7 to the energy levels at pH = 0, which allows for comparison. Furthermore, we illustrate how different bias voltages will affect the free-energy landscapes of the catalysts. This allows us to determine the so-called theoretical...

  7. Electrical Energy Statistics for France. Definitive results for the year 2012 - Synthesis

    International Nuclear Information System (INIS)

    2013-01-01

    The mission of RTE, the French electricity Transportation grid, a public service assignment, is to balance the electricity supply and demand in real time. This report presents some detailed statistics on electricity flows in France, on electricity market mechanism and on facilities: consumption, generation, trade, RTE's network performance and evolution with respect to the previous year

  8. Turbulence statistics and energy budget in rotating Rayleigh-Bénard convection

    NARCIS (Netherlands)

    Kunnen, R.P.J.; Geurts, Bernardus J.; Clercx, H.J.H.

    The strongly-modified turbulence statistics of Rayleigh–Bénard convection subject to various rotation rates is addressed by numerical investigations. The flow is simulated in a domain with periodic boundary conditions in the horizontal directions, and confined vertically by parallel no-slip

  9. Improved score statistics for meta-analysis in single-variant and gene-level association studies.

    Science.gov (United States)

    Yang, Jingjing; Chen, Sai; Abecasis, Gonçalo

    2018-06-01

    Meta-analysis is now an essential tool for genetic association studies, allowing them to combine large studies and greatly accelerating the pace of genetic discovery. Although the standard meta-analysis methods perform equivalently as the more cumbersome joint analysis under ideal settings, they result in substantial power loss under unbalanced settings with various case-control ratios. Here, we investigate the power loss problem by the standard meta-analysis methods for unbalanced studies, and further propose novel meta-analysis methods performing equivalently to the joint analysis under both balanced and unbalanced settings. We derive improved meta-score-statistics that can accurately approximate the joint-score-statistics with combined individual-level data, for both linear and logistic regression models, with and without covariates. In addition, we propose a novel approach to adjust for population stratification by correcting for known population structures through minor allele frequencies. In the simulated gene-level association studies under unbalanced settings, our method recovered up to 85% power loss caused by the standard methods. We further showed the power gain of our methods in gene-level tests with 26 unbalanced studies of age-related macular degeneration . In addition, we took the meta-analysis of three unbalanced studies of type 2 diabetes as an example to discuss the challenges of meta-analyzing multi-ethnic samples. In summary, our improved meta-score-statistics with corrections for population stratification can be used to construct both single-variant and gene-level association studies, providing a useful framework for ensuring well-powered, convenient, cross-study analyses. © 2018 WILEY PERIODICALS, INC.

  10. QCD Precision Measurements and Structure Function Extraction at a High Statistics, High Energy Neutrino Scattering Experiment: NuSOnG

    International Nuclear Information System (INIS)

    Adams, T.; Batra, P.; Bugel, Leonard G.; Camilleri, Leslie Loris; Conrad, Janet Marie; Fisher, Peter H.; Formaggio, Joseph Angelo; Karagiorgi, Georgia S.; )

    2009-01-01

    We extend the physics case for a new high-energy, ultra-high statistics neutrino scattering experiment, NuSOnG (Neutrino Scattering On Glass) to address a variety of issues including precision QCD measurements, extraction of structure functions, and the derived Parton Distribution Functions (PDFs). This experiment uses a Tevatron-based neutrino beam to obtain a sample of Deep Inelastic Scattering (DIS) events which is over two orders of magnitude larger than past samples. We outline an innovative method for fitting the structure functions using a parameterized energy shift which yields reduced systematic uncertainties. High statistics measurements, in combination with improved systematics, will enable NuSOnG to perform discerning tests of fundamental Standard Model parameters as we search for deviations which may hint of 'Beyond the Standard Model' physics

  11. Multiphoton ionization as a probe of molecular photofragmentation: statistical and dynamical energy partitioning in the multiphoton dissociation of nitromethane

    International Nuclear Information System (INIS)

    Rockney, B.H.

    1982-01-01

    Multiphoton ionization (MPI) appears in its first use as a probe of laser-induced photofragmentation. Specifically, MPI here reveals the internal and translational energy content of the nascent fragments from the infrared multiphoton dissociation (MPD) of nitromethane (CH 3 NO 2 ). The apparatus for this work consists of a pulsed supersonic molecular beam crossed by two pulsed and focused lasers - a CO 2 laser to induce collision-free unimolecular dissociation of CH 3 NO 2 , and a tunable dye laser following immediately to ionize selectively one of the pair of dissociation fragments for detection by a mass spectrometer and particle multiplier. A computer simulation of each fragment's MPI spectrum, a series of four photon resonances to members of the npsigma/sub u/ Rydberg state of NO 2 and three photon resonances to two vibrational members of the #betta# 1 Rydberg state of CH 3 , aids in determining the fragment's internal energy content. The dye laser is delayed and its focus is traced through a small quarter circle centered at the focus of the CO 2 laser. The flight times of the fragments from the point of dissociation and their laboratory scattering angular distributions at fixed ionizing laser wavelength provide their center of mass recoil velocity distributions. The energy deposited in the fragments evidences a striking mixture of statistical and dynamical energy partitioning. The statistical RRKM theory of unimolecular decomposition accurately predicts the amount of internal energy found in the fragments

  12. Energy dissipation statistics along the Lagrangian trajectories in three-dimensional turbulent flows

    Science.gov (United States)

    Luo, Jian-ping; Wang, Yong-bo; Qiu, Xiang; Xia, Yu-xian; Liu, Yu-lu

    2018-02-01

    Energy dissipation rate is relevant in the turbulent phenomenology theory, such as the classical Kolmogorov 1941 and 1962 refined similarity hypothesis. However, it is extremely difficult to retrieve experimentally or numerically. In this paper, the full energy dissipation, its proxy and the pseudo-energy dissipation rate along the Lagrangian trajectories in the three-dimensional turbulent flows are examined by using a state-of-art high resolution direct numerical simulation database with a Reynolds number Re λ = 400. It is found that the energy dissipation proxy ɛ P is more correlated with the full energy dissipation rate ɛ. The corresponding correlation coefficient ρ between the velocity gradient and e shows a Gaussian distribution. Furthermore, the coarse-grained dissipation rate is considered. The cross correlation ρ is found to be increased with the increasing of the scale τ. Finally, the hierarchical structure is extracted for the full energy dissipation rate, its proxy and the pseudo one. The results show a power-law behavior in the inertial range 10 ≤ τ/ τ η ≤ 100. The experimental scaling exponent of the full energy dissipation rate is found to be h L =0.69, agrees very well with the one found for the Eulerian velocity. The experimental values for ɛ P and ɛ S are around h L = 0.78, implying a more intermittent Lagrangian turbulence. Therefore, the intermittency parameter provided by ɛ P and ɛ S will be biased.

  13. ARRA-Multi-Level Energy Storage and Controls for Large-Scale Wind Energy Integration

    Energy Technology Data Exchange (ETDEWEB)

    David Wenzhong Gao

    2012-09-30

    The Project Objective is to design innovative energy storage architecture and associated controls for high wind penetration to increase reliability and market acceptance of wind power. The project goals are to facilitate wind energy integration at different levels by design and control of suitable energy storage systems. The three levels of wind power system are: Balancing Control Center level, Wind Power Plant level, and Wind Power Generator level. Our scopes are to smooth the wind power fluctuation and also ensure adequate battery life. In the new hybrid energy storage system (HESS) design for wind power generation application, the boundary levels of the state of charge of the battery and that of the supercapacitor are used in the control strategy. In the controller, some logic gates are also used to control the operating time durations of the battery. The sizing method is based on the average fluctuation of wind profiles of a specific wind station. The calculated battery size is dependent on the size of the supercapacitor, state of charge of the supercapacitor and battery wear. To accommodate the wind power fluctuation, a hybrid energy storage system (HESS) consisting of battery energy system (BESS) and super-capacitor is adopted in this project. A probability-based power capacity specification approach for the BESS and super-capacitors is proposed. Through this method the capacities of BESS and super-capacitor are properly designed to combine the characteristics of high energy density of BESS and the characteristics of high power density of super-capacitor. It turns out that the super-capacitor within HESS deals with the high power fluctuations, which contributes to the extension of BESS lifetime, and the super-capacitor can handle the peaks in wind power fluctuations without the severe penalty of round trip losses associated with a BESS. The proposed approach has been verified based on the real wind data from an existing wind power plant in Iowa. An

  14. Summary and statistical analysis of environmental monitoring data in the Oarai Research Establishment, Japan Atomic Energy Research Institute

    International Nuclear Information System (INIS)

    Tamura, Katsuhiro; Kitano, Kyoshiro; Sibanuma, Yukio; Takasaki, Koichi; Ohhata, Tsutomu

    1998-03-01

    In the Oarai Research Establishment, Japan Atomic Energy Research Institute (JAERI), the environmental monitoring has been conducted for about 29 years since April 1968. The results are discussed for evaluation of long-term and short-term fluctuation in the radiological conditions in the Oarai area. This report summarises the data of the environmental monitoring in Oarai, and statistical analyses were made of the data collected from 1985 through 1994. (author)

  15. EVALUATION OF ENERGY EFFICIENT USE AT THE LEVEL OF NATIONAL ECONOMY

    Directory of Open Access Journals (Sweden)

    RUGINĂ V.

    2016-03-01

    Full Text Available The paper presents the importance of evaluating energy efficient use that is explicitly stipulated in the strategic and legislative documents adopted at the national and international level, including the Directive 2012/27/EU and the Law 121/2014. Energy intensity frequently that is used in international evaluations and comparisons of energy efficient use is also used in Romania. The topic is approached both by specialists and politicians, newspapermen, representatives of the public opinion etc. This indicator has acquired axiomatic valences and its values are presented as unquestionable arguments for incontestable truths. Nevertheless, besides correct and well-balanced approaches one may come across distorted presentations and exaggerations resulting from superficially knowing the problem. The information and data presented in the paper can bring clarifications on this field. In the first place, energy intensity characterizes the economic efficiency of energy utilization and only to little extent the technical efficiency. Its value is directly linked to macroeconomic parameters, among which the parity between the national currency and the currencies in international circulation, the structure of the national economy etc. The paper presents different variants for the interpretation and calculation of the energy intensity indicator value, including the corresponding mathematical models. Based on the primary information obtained from reliable sources (National Institute of Statistics, EUROSTAT data base values of this indicator are calculated in different variants that are considered and comparisons between the obtained results are made. Choosing the variant for defining and calculating energy intensity, respectively, depends on the purpose of the analysis to be carried out and needs to be explicitly presented together with the results obtained. The paper includes recommendations on how the calculation variants and the results obtained by carrying

  16. Dynamics of the D(+) + H2 → HD + H(+) reaction at the low energy regime by means of a statistical quantum method.

    Science.gov (United States)

    González-Lezana, Tomás; Honvault, Pascal; Scribano, Yohann

    2013-08-07

    The D(+) +H2(v = 0, j = 0, 1) → HD+H(+) reaction has been investigated at the low energy regime by means of a statistical quantum mechanical (SQM) method. Reaction probabilities and integral cross sections (ICSs) between a collisional energy of 10(-4) eV and 0.1 eV have been calculated and compared with previously reported results of a time independent quantum mechanical (TIQM) approach. The TIQM results exhibit a dense profile with numerous narrow resonances down to Ec ~ 10(-2) eV and for the case of H2(v = 0, j = 0) a prominent peak is found at ~2.5 × 10(-4) eV. The analysis at the state-to-state level reveals that this feature is originated in those processes which yield the formation of rotationally excited HD(v' = 0, j' > 0). The statistical predictions reproduce reasonably well the overall behaviour of the TIQM ICSs at the larger energy range (Ec ≥ 10(-3) eV). Thermal rate constants are in qualitative agreement for the whole range of temperatures investigated in this work, 10-100 K, although the SQM values remain above the TIQM results for both initial H2 rotational states, j = 0 and 1. The enlargement of the asymptotic region for the statistical approach is crucial for a proper description at low energies. In particular, we find that the SQM method leads to rate coefficients in terms of the energy in perfect agreement with previously reported measurements if the maximum distance at which the calculation is performed increases noticeably with respect to the value employed to reproduce the TIQM results.

  17. Dynamics of the D{sup +}+ H{sub 2}→ HD + H{sup +} reaction at the low energy regime by means of a statistical quantum method

    Energy Technology Data Exchange (ETDEWEB)

    González-Lezana, Tomás [Instituto de Física Fundamental, IFF-CSIC, Serrano 123, 28006 Madrid (Spain); Honvault, Pascal [Lab. Interdisciplinaire Carnot de Bourgogne, UMR CNRS 6303, Univ. Bourgogne, 21078 Dijon Cedex, France and UFR Sciences et Techniques, Univ. de Franche-Comté, 25030 Besançon cedex (France); Scribano, Yohann [Lab. Univers et Particules de Montpellier, Univ. de Montpellier II, LUPM - UMR CNRS 5299, 34095 Montpellier Cedex (France)

    2013-08-07

    The D{sup +}+H{sub 2}(v= 0, j= 0, 1) → HD+H{sup +} reaction has been investigated at the low energy regime by means of a statistical quantum mechanical (SQM) method. Reaction probabilities and integral cross sections (ICSs) between a collisional energy of 10{sup −4} eV and 0.1 eV have been calculated and compared with previously reported results of a time independent quantum mechanical (TIQM) approach. The TIQM results exhibit a dense profile with numerous narrow resonances down to E{sub c}∼ 10{sup −2} eV and for the case of H{sub 2}(v= 0, j= 0) a prominent peak is found at ∼2.5 × 10{sup −4} eV. The analysis at the state-to-state level reveals that this feature is originated in those processes which yield the formation of rotationally excited HD(v′= 0, j′ > 0). The statistical predictions reproduce reasonably well the overall behaviour of the TIQM ICSs at the larger energy range (E{sub c}⩾ 10{sup −3} eV). Thermal rate constants are in qualitative agreement for the whole range of temperatures investigated in this work, 10–100 K, although the SQM values remain above the TIQM results for both initial H{sub 2} rotational states, j= 0 and 1. The enlargement of the asymptotic region for the statistical approach is crucial for a proper description at low energies. In particular, we find that the SQM method leads to rate coefficients in terms of the energy in perfect agreement with previously reported measurements if the maximum distance at which the calculation is performed increases noticeably with respect to the value employed to reproduce the TIQM results.

  18. Dynamics of the D++ H2→ HD + H+ reaction at the low energy regime by means of a statistical quantum method

    International Nuclear Information System (INIS)

    González-Lezana, Tomás; Honvault, Pascal; Scribano, Yohann

    2013-01-01

    The D + +H 2 (v= 0, j= 0, 1) → HD+H + reaction has been investigated at the low energy regime by means of a statistical quantum mechanical (SQM) method. Reaction probabilities and integral cross sections (ICSs) between a collisional energy of 10 −4 eV and 0.1 eV have been calculated and compared with previously reported results of a time independent quantum mechanical (TIQM) approach. The TIQM results exhibit a dense profile with numerous narrow resonances down to E c ∼ 10 −2 eV and for the case of H 2 (v= 0, j= 0) a prominent peak is found at ∼2.5 × 10 −4 eV. The analysis at the state-to-state level reveals that this feature is originated in those processes which yield the formation of rotationally excited HD(v′= 0, j′ > 0). The statistical predictions reproduce reasonably well the overall behaviour of the TIQM ICSs at the larger energy range (E c ⩾ 10 −3 eV). Thermal rate constants are in qualitative agreement for the whole range of temperatures investigated in this work, 10–100 K, although the SQM values remain above the TIQM results for both initial H 2 rotational states, j= 0 and 1. The enlargement of the asymptotic region for the statistical approach is crucial for a proper description at low energies. In particular, we find that the SQM method leads to rate coefficients in terms of the energy in perfect agreement with previously reported measurements if the maximum distance at which the calculation is performed increases noticeably with respect to the value employed to reproduce the TIQM results

  19. Impact of energy policy instruments on the estimated level of underlying energy efficiency in the EU residential sector

    International Nuclear Information System (INIS)

    Filippini, Massimo; Hunt, Lester C.; Zorić, Jelena

    2014-01-01

    The promotion of energy efficiency is seen as one of the top priorities of EU energy policy (EC, 2010). In order to design and implement effective energy policy instruments, it is necessary to have information on energy demand price and income elasticities in addition to sound indicators of energy efficiency. This research combines the approaches taken in energy demand modelling and frontier analysis in order to econometrically estimate the level of energy efficiency for the residential sector in the EU-27 member states for the period 1996 to 2009. The estimates for the energy efficiency confirm that the EU residential sector indeed holds a relatively high potential for energy savings from reduced inefficiency. Therefore, despite the common objective to decrease ‘wasteful’ energy consumption, considerable variation in energy efficiency between the EU member states is established. Furthermore, an attempt is made to evaluate the impact of energy-efficiency measures undertaken in the EU residential sector by introducing an additional set of variables into the model and the results suggest that financial incentives and energy performance standards play an important role in promoting energy efficiency improvements, whereas informative measures do not have a significant impact. - Highlights: • The level of energy efficiency of the EU residential sector is estimated. • Considerable potential for energy savings from reduced inefficiency is established. • The impact of introduced energy-efficiency policy measures is also evaluated. • Financial incentives are found to promote energy efficiency improvements. • Energy performance standards also play an important role

  20. Higher order corrections to energy levels of muonic atoms

    International Nuclear Information System (INIS)

    Rinker, G.A. Jr.; Steffen, R.M.

    1975-08-01

    In order to facilitate the analysis of muonic x-ray spectra, the results of numerical computations of all higher order quantum electrodynamical corrections to the energy levels of muonic atoms are presented in tabular and graphical form. These corrections include the vacuum polarization corrections caused by emission and reabsorption of virtual electron pairs to all orders, including ''double-bubble'' and ''cracked-egg'' diagrams. An estimate of the Delbruecke scattering-type correction is presented. The Lamb-shift (second- and fourth-order vertex) corrections have been calculated including the correction for the anomalous magnetic moment of the muon. The relativistic nuclear motion (or recoil) correction as well as the correction caused by the screening of the atomic electrons is presented in graphs. For the sake of completeness a graph of the nuclear polarization as computed on the basis of Chen's approach has been included. All calculations were made with a two-parameter Fermi distribution of the nuclear charge density. 7 figures, 23 references

  1. The ‘39 steps’: an algorithm for performing statistical analysis of data on energy intake and expenditure

    Directory of Open Access Journals (Sweden)

    John R. Speakman

    2013-03-01

    Full Text Available The epidemics of obesity and diabetes have aroused great interest in the analysis of energy balance, with the use of organisms ranging from nematode worms to humans. Although generating energy-intake or -expenditure data is relatively straightforward, the most appropriate way to analyse the data has been an issue of contention for many decades. In the last few years, a consensus has been reached regarding the best methods for analysing such data. To facilitate using these best-practice methods, we present here an algorithm that provides a step-by-step guide for analysing energy-intake or -expenditure data. The algorithm can be used to analyse data from either humans or experimental animals, such as small mammals or invertebrates. It can be used in combination with any commercial statistics package; however, to assist with analysis, we have included detailed instructions for performing each step for three popular statistics packages (SPSS, MINITAB and R. We also provide interpretations of the results obtained at each step. We hope that this algorithm will assist in the statistically appropriate analysis of such data, a field in which there has been much confusion and some controversy.

  2. The trend in current and near future energy consumption from a statistical perspective

    International Nuclear Information System (INIS)

    Kadoshin, Shiro; Nishiyama, Takashi; Ito, Toshihide

    2000-01-01

    Energy consumption has increased remarkably over the past half century mainly due to increasing population and economic development. The influences of these two factors are considered. In most developed countries, such as Japan, France, Germany and Korea, the growth rate of energy consumption is due to economic development. The effects of population in Germany and Japan will substantially decline. In the USA, it is due to both factors as well as in the developing countries, such as China, India, Indonesia and Latin America. Economic success is more effective than increasing population in China, India and Indonesia, while both factors are roughly equal in Latin America. In Africa, though the growth rate depends on the effect of increasing population, its contribution to world energy consumption is small. On a worldwide scale, the growth rate of energy consumption will be affected by improving standards of living. (author)

  3. An Evaluation Framework for Energy Aware Buildings using Statistical Model Checking

    DEFF Research Database (Denmark)

    David, Alexandre; Du, DeHui; Larsen, Kim Guldstrand

    2012-01-01

    properties of this formalisms. A particular kind of cyber-physical systems are Smart Grids which together with Intelligent, Energy Aware Buildings will play a major role in achieving an energy efficient society of the future. In this paper we present a framework in Uppaal-smc for energy aware buildings...... allowing to evaluate the performance of proposed control strategies in terms of their induced comfort and energy profiles under varying environmental settings (e.g. weather, user behaviour, ...). To demonstrate the intended use and usefulness of our framework, we present an application to the Hybrid......Cyber-physical systems are to be found in numerous applications throughout society. The principal barrier to develop trustworthy cyber-physical systems is the lack of expressive modelling and specification for- malisms supported by efficient tools and methodologies. To overcome this barrier, we...

  4. Energy statistics for non-residential premises 2012; Energistatistik foer lokaler 2012

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-07-01

    This report presents data on a number of non-residential premises, heated floor area, use of energy (totals and averages) and use of fuels (totals and averages) for the total population and for various subDivs.

  5. A statistical approach to electrical storage sizing with application to the recovery of braking energy

    International Nuclear Information System (INIS)

    Musolino, V.; Pievatolo, A.; Tironi, E.

    2011-01-01

    In the context of efficient energy use, electrical energy in electric drives plays a fundamental role. High efficiency energy storage systems permit energy recovery, peak shaving and power quality functions. Due to their cost and the importance of system integration, there is a need for a correct design based on technical-economical optimization. In this paper, a method to design a centralized storage system for the recovery of the power regenerated by a number of electric drives is presented. It is assumed that the drives follow deterministic power cycles, but shifted by an uncertain amount. Therefore the recoverable energy and, consequently, the storage size requires the optimization of a random cost function, embedding both the plant total cost and the saving due to the reduced energy consumption during the useful life of the storage. The underlying stochastic model for the power profile of the drives as a whole is built from a general Markov chain framework. A numerical example, based on Monte Carlo simulations, concerns the maximization of the recoverable potential energy of multiple bridge cranes, supplied by a unique grid connection point and a centralized supercapacitor storage system. -- Highlights: ► Recovery of braking power produced by multiple electric drives. ► Temporal power profile modeled through the multinomial distribution and Markov chains. ► Storage sizing via random cost function optimization. ► The search region for the optimization is given explicitly. ► The value of energy recovered during the useful life of the storage outweighs its cost.

  6. Order no 000004/PRN/ME/P/DS from January 21, 2014 provides for the organization and attributions of divisions and departments of the Statistics Directorate of the Ministry of Energy and Oil

    International Nuclear Information System (INIS)

    Foumakoye, Gado

    2014-01-01

    This order provides for the organization and attributions of divisions and departments of the Statistics Directorate of the Ministry of Energy and Oil. This direction has two divisions namely Division for Energy Statistics and Division for Oil Statistics . Energy Statistics Division includes the following services: Service collection and data analysis for energy statistics and the service of production, dissemination and conservation of energy statics. The division for Oil Statistics includes the Service collection and data analysis for energy statistics and the service of production, dissemination and conservation of energy statistics. [fr

  7. Application of the non-extensive statistical approach to high energy particle collisions

    Science.gov (United States)

    Bíró, Gábor; Barnaföldi, Gergely Gábor; Biró, Tamás Sándor; Ürmössy, Károly

    2017-06-01

    In high-energy collisions the number of created particles is far less than the thermodynamic limit, especially in small colliding systems (e.g. proton-proton). Therefore final-state effects and fluctuations in the one-particle energy distribution are appreciable. As a consequence the characterization of identified hadron spectra with the Boltzmann - Gibbs thermodynamical approach is insuffcient [1]. Instead particle spectra measured in high-energy collisions can be described very well with Tsallis -Pareto distributions, derived from non-extensive thermodynamics [2, 3]. Using the Tsallis q-entropy formula, a generalization of the Boltzmann - Gibbs entropy, we interpret the microscopic physics by analysing the Tsallis q and T parameters. In this paper we give a quick overview on these parameters, analyzing identified hadron spectra from recent years in a wide center-of-mass energy range. We demonstrate that the fitted Tsallis-parameters show dependency on the center-of-mass energy and particle species. Our findings are described well by a QCD inspired evolution ansatz. Based on this comprehensive study, apart from the evolution, both mesonic and barionic components found to be non-extensive (q > 1), beside the mass ordered hierarchy observed in parameter T.

  8. Statistical Study of Aircraft Icing Probabilities at the 700- and 500- Millibar Levels over Ocean Areas in the Northern Hemisphere

    Science.gov (United States)

    Perkins, Porter J.; Lewis, William; Mulholland, Donald R.

    1957-01-01

    A statistical study is made of icing data reported from weather reconnaissance aircraft flown by Air Weather Service (USAF). The weather missions studied were flown at fixed flight levels of 500 millibars (18,000 ft) and 700 millibars (10,000 ft) over wide areas of the Pacific, Atlantic, and Arctic Oceans. This report is presented as part of a program conducted by the NACA to obtain extensive icing statistics relevant to aircraft design and operation. The thousands of in-flight observations recorded over a 2- to 4-year period provide reliable statistics on icing encounters for the specific areas, altitudes, and seasons included in the data. The relative frequencies of icing occurrence are presented, together with the estimated icing probabilities and the relation of these probabilities to the frequencies of flight in clouds and cloud temperatures. The results show that aircraft operators can expect icing probabilities to vary widely throughout the year from near zero in the cold Arctic areas in winter up to 7 percent in areas where greater cloudiness and warmer temperatures prevail. The data also reveal a general tendency of colder cloud temperatures to reduce the probability of icing in equally cloudy conditions.

  9. Clean Energy Policy Analyses: Analysis of the Status and Impact of Clean Energy Policies at the Local Level

    Energy Technology Data Exchange (ETDEWEB)

    Busche, S.

    2010-12-01

    This report takes a broad look at the status of local clean energy policies in the United States to develop a better understanding of local clean energy policy development and the interaction between state and local policies. To date, the majority of clean energy policy research focuses on the state and federal levels. While there has been a substantial amount of research on local level climate change initiatives, this is one of the first analyses of clean energy policies separate from climate change initiatives. This report is one in a suite of reports analyzing clean energy and climate policy development at the local, state, and regional levels.

  10. Clean Energy Policy Analyses. Analysis of the Status and Impact of Clean Energy Policies at the Local Level

    Energy Technology Data Exchange (ETDEWEB)

    Busche, S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2010-12-01

    This report takes a broad look at the status of local clean energy policies in the United States to develop a better understanding of local clean energy policy development and the interaction between state and local policies. To date, the majority of clean energy policy research focuses on the state and federal levels. While there has been a substantial amount of research on local level climate change initiatives, this is one of the first analyses of clean energy policies separate from climate change initiatives. This report is one in a suite of reports analyzing clean energy and climate policy development at the local, state, and regional levels.

  11. the effect of dietary energy and protein levels on the composition

    African Journals Online (AJOL)

    Zannel

    Keywords: Breeding ostriches, nutrition, energy, protein, amino acids, egg ... Yolk is an important nutritional component of the avian egg because .... 3 (energy) x 3 (protein) factorial design with energy and protein levels featuring as main factors. ... No significant interactions were observed between energy and protein levels.

  12. Statistical Delay QoS Provisioning for Energy-Efficient Spectrum-Sharing Based Wireless Ad Hoc Sensor Networks

    Directory of Open Access Journals (Sweden)

    Yichen Wang

    2016-01-01

    Full Text Available In this paper, we develop the statistical delay quality-of-service (QoS provisioning framework for the energy-efficient spectrum-sharing based wireless ad hoc sensor network (WAHSN, which is characterized by the delay-bound violation probability. Based on the established delay QoS provisioning framework, we formulate the nonconvex optimization problem which aims at maximizing the average energy efficiency of the sensor node in the WAHSN while meeting PU’s statistical delay QoS requirement as well as satisfying sensor node’s average transmission rate, average transmitting power, and peak transmitting power constraints. By employing the theories of fractional programming, convex hull, and probabilistic transmission, we convert the original fractional-structured nonconvex problem to the additively structured parametric convex problem and obtain the optimal power allocation strategy under the given parameter via Lagrangian method. Finally, we derive the optimal average energy efficiency and corresponding optimal power allocation scheme by employing the Dinkelbach method. Simulation results show that our derived optimal power allocation strategy can be dynamically adjusted based on PU’s delay QoS requirement as well as the channel conditions. The impact of PU’s delay QoS requirement on sensor node’s energy efficiency is also illustrated.

  13. City-Level Energy Decision Making. Data Use in Energy Planning, Implementation, and Evaluation in U.S. Cities

    Energy Technology Data Exchange (ETDEWEB)

    Aznar, Alexandra [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Day, Megan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Doris, Elizabeth [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Mathur, Shivani [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Donohoo-Vallett, Paul [U.S. Department of Energy, Washington, DC (United States)

    2015-07-08

    The Cities-LEAP technical report, City-Level Energy Decision Making: Data Use in Energy Planning, Implementation, and Evaluation in U.S. Cities, explores how a sample of cities incorporates data into making energy-related decisions. This report provides the foundation for forthcoming components of the Cities-LEAP project that will help cities improve energy decision making by mapping specific city energy or climate policies and actions to measurable impacts and results.

  14. Single Particle energy levels in ODD-A Nuclei

    International Nuclear Information System (INIS)

    Lasijo, R.S.

    1997-01-01

    Singe particle energies for atomic nuclei with odd-A number of nucleons, i.e. nuclei possessing odd number of protons or odd number of neutrons, were calculated based on Nilsson's theory, and then the diagrams were made. the energy diagram is in the from of plot of energies as function of deformations, entities identifying the deviations from the spherical shape. The energy calculations were done using FORTRAN 77 language of PC (Personal Computer) version with Microsoft Fortran Power Station compiler, which was then combined with WORD version 6.0 and EXCEL version 5.0 of WINDOWS WORKGROUP to make the plot

  15. Statistical aspects of nuclear structure

    International Nuclear Information System (INIS)

    Parikh, J.C.

    1977-01-01

    The statistical properties of energy levels and a statistical approach to transition strengths are discussed in relation to nuclear structure studies at high excitation energies. It is shown that the calculations can be extended to the ground state domain also. The discussion is based on the study of random matrix theory of level density and level spacings, using the Gaussian Orthogonal Ensemble (GOE) concept. The short range and long range correlations are also studied statistically. The polynomial expansion method is used to obtain excitation strengths. (A.K.)

  16. Practical Statistics

    CERN Document Server

    Lyons, L.

    2016-01-01

    Accelerators and detectors are expensive, both in terms of money and human effort. It is thus important to invest effort in performing a good statistical anal- ysis of the data, in order to extract the best information from it. This series of five lectures deals with practical aspects of statistical issues that arise in typical High Energy Physics analyses.

  17. Investigating output and energy variations and their relationship to delivery QA results using Statistical Process Control for helical tomotherapy.

    Science.gov (United States)

    Binny, Diana; Mezzenga, Emilio; Lancaster, Craig M; Trapp, Jamie V; Kairn, Tanya; Crowe, Scott B

    2017-06-01

    The aims of this study were to investigate machine beam parameters using the TomoTherapy quality assurance (TQA) tool, establish a correlation to patient delivery quality assurance results and to evaluate the relationship between energy variations detected using different TQA modules. TQA daily measurement results from two treatment machines for periods of up to 4years were acquired. Analyses of beam quality, helical and static output variations were made. Variations from planned dose were also analysed using Statistical Process Control (SPC) technique and their relationship to output trends were studied. Energy variations appeared to be one of the contributing factors to delivery output dose seen in the analysis. Ion chamber measurements were reliable indicators of energy and output variations and were linear with patient dose verifications. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  18. Statistical theory for calculating energy spectra of β-delayed neutrons

    International Nuclear Information System (INIS)

    Kawano, Toshihiko; Moeller, Peter; Wilson, William B.

    2008-01-01

    Theoretical β-delayed neutron spectra are calculated based on the Quasi-particle Random Phase Approximation (QRPA) and the Hauser-Feshbach statistical model. Neutron emissions from an excited daughter nucleus after β-decay to the granddaughter residual are more accurately calculated than previous evaluations, including all the microscopic nuclear structure information, such as a Gamow-Teller strength distribution and discrete states in the granddaughter. The calculated delayed-neutron spectra reasonably agree with those evaluations in the ENDF decay library, which are based on experimental data. The model was adopted to generate the delayed-neutron spectra for all 271 precursors. (authors)

  19. Statistical energy as a tool for binning-free, multivariate goodness-of-fit tests, two-sample comparison and unfolding

    International Nuclear Information System (INIS)

    Aslan, B.; Zech, G.

    2005-01-01

    We introduce the novel concept of statistical energy as a statistical tool. We define statistical energy of statistical distributions in a similar way as for electric charge distributions. Charges of opposite sign are in a state of minimum energy if they are equally distributed. This property is used to check whether two samples belong to the same parent distribution, to define goodness-of-fit tests and to unfold distributions distorted by measurement. The approach is binning-free and especially powerful in multidimensional applications

  20. Statistical annual by energy in the municipalities of Sao Paulo State, Brazil - 2006

    International Nuclear Information System (INIS)

    2008-01-01

    This document has as objective the compilation and dissemination of the consumption data corresponding of the main energetics used in the municipalities of Sao Paulo State, Brazil in the year of 2006. The considered energetics are: electric energy, natural gas, petroleum derivatives; hydrated alcohol and biodiesel